WorldWideScience

Sample records for interface sogo chosa

  1. Report on a comprehensive research study (home welfare apparatus system - lifestyle); Sogo chosa kenkyu (zaitaku fukushi kiki system - lifestyle) hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    An investigational study was conducted on evacuation of aged people at disaster, life maintenance, and welfare apparatus which is applicable to the future change of life style and its harmony with the living environment. In the study of care apparatus, reported were the apparatus operational interface using the indoor environmental control simulation system, safety on moving/transfer equipment, experiment on opening/closing power of sliding doors, study of electric-driven wheel chairs, study of the sitting pressure of various wheel chairs, etc. In relation to the living environment, the paper reported planning of houses introducing care apparatus, assessment of system kitchen, disaster prevention measures for aged/handicapped people, study on performance of the combined use in the living environment, assessment of drops in floor level in the living space, etc. Also reported were assessment on the living environmental control state of serious paralyzers of the limbs, study of a network to support care at home, etc. 48 refs., 117 figs., 29 tabs.

  2. Vicissitude of Sogo Nur and environmental-climatic change during last 1500 years

    Institute of Scientific and Technical Information of China (English)

    JIN; Heling; XIAO; Honglang; SUN; Liangying; ZHANG; Hong

    2004-01-01

    Lakes in arid zone are sensitive to climatic changes. The lacustrine sediment sequence in Sogo Nur has well and truly recorded climatic events such as the Sui-Tang Dynasty Warm Period, the Song-Liao Dynasty Cold Period, the Medieval Warm Period, the Little Ice Age and the 20th Century Warm Period. Commonly, the climate in warm Periods was relatively humid,accordingly the lake area extended and water level rose, and vice versa. Apart from climatic change, human activity is also an important factor of influencing lake vicissitude, and they played the dominant role alternatively during different periods; the factor of climatic change predominated in historical period, while since the beginning of the 20th century the utilization of water resources by human has became decisive.

  3. Fiscal 1997 report on the results of the international standardization R and D. Overall survey; 1997 nendo seika hokokusho kokusai hyojun soseigata kenkyu kaihatsu. Sogo chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The paper summed up the results of the survey of tackling with the international standardization by enterprises and organizations involved in the standardization in the U.S., Europe and Japan, the results of the R and D on 20 themes for the international standardization, and the development toward the international standardization. As the R and D themes, the following were selected: the development of chemical method to analyze/evaluate metallic coatings of surface treated steel coating sheets, R and D of the basic evaluation method of functional composite particles, international standards for computer/manikins, basic technology of color image management, study on optimizing design/evaluation technology using quality engineering, study of the international standardization by economic evaluation of environmental impacts, R and D of the standardization of a method to test acceleration life of phosphorous acid fuel cells, development of a test method of halogen-free flame-retardant cables and a study of the cable standards, standard measuring methods of hormone effects of chemical substances, quantification of the sensory evaluation and international standardization in the paint field, experimental study on the international standardization for immunochemical measurement of chemical substances, etc. 24 figs., 16 tabs.

  4. 1998 Annual Study Report. New industry supporting type international standard development program (Comprehensive survey); 1998 nendo seika hokokusho. Shinki sangyo shiengata kokusai hyojun kaihatsu jigyo (sogo chosa)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Summarized herein are results of the survey on a total of 13 themes for international standardization. These themes are for standardization of (1) color control, (2) securing interoperability between optical disk systems, (3) digital image processing for home digital electronic appliances, (4) securing interconnectability between home electronic information appliances, (5) production process systems, (6) testing and evaluation methods for fine ceramic materials for communications, (7) evaluation methods for high-temperature properties of new glass melts, (8) corrosion testing and evaluation methods for surface-treated steel plates, (9) testing and evaluation methods for high-purity titanium, (10) testing and evaluation methods for plastic optical fibers, (11) evaluation methods for high-strength, large-size steel pipe characteristics for superhigh-pressure natural gas pipelines, (12) methods for measuring mileage of hybrid electric vehicles, and (13) methods for determining recycle ratios of automobile components. This comprehensive survey also includes overseas trends for the standardization, establishment/expansion of the international standardization processes, and standardization for determining recycle ratios of home electric appliances. (NEDO)

  5. Fiscal 1992 comprehensive survey of geothermal resource in Japan (tertiary). Report on a deep-seated geothermal resource survey (summary); 1992 nendo zenkoku chinetsu shigen sogo chosa (dai sanji). Shinbu chinetsu shigen chosa hokokusho (yoyaku)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-01

    Drilling and survey were conducted of deep geothermal exploration wells to grasp the existing situation of deep geothermal resource and the whole image of geothermal systems in the area where geothermal resource was already developed. Exploration wells are planned to be drilled down to a depth of 4000m in five years. In fiscal 1992, 24-inch pits were drilled down to 605m. In the survey, data were obtained on microscopic observation of cores and cuttings, X-ray diffraction analysis, survey of fluid inclusion, survey of geology and underground gas by mud log, etc. Further conducted were temperature log, electrical log, lateral log, density log, acoustic log, FMI log, induction log, etc. In making deep geothermal models, selection and preparation of the existing data were made, and geothermal structure models and reservoir models were made as prediction models in the Kakkonda area. Besides, studies were made of a survey method using microearthquakes, etc., survey technology using resistivity, survey technology using artificial fluid inclusion, deep drilling technology, deep fluid utilization technology, etc. 72 refs., 73 figs., 33 tabs.

  6. Fiscal 1993 survey of the base arrangement promotion for foreign coal import. Survey of the general situation of Thai coal; 1993 nendo kaigaitan yunyu kiban seibi sokushin chosa. Thai sekitan sogo jijo chosa

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-03-01

    The paper reported the energy situation in Thailand, the present and future status of coal supply/demand, the present situation of environmental policy and air pollution prevention policy and problems concerning coal and the measures for solution, and a possibility of Japan`s cooperation. In Thailand, the total coal supply amount in 1992 is 16.079 million tons, which is 9.1% of all the primary energy supply amount. The country produces only a few amount of anthracite and subbituminous coal beside brown coal. The domestic coal equals brown coal, the production of which was 15.335 million tons in 1992, 13.9% of all the primary energy demand. Concerning brown coal, 79.7% of all the brown coal supply are for electric power use, and others for industrial use such as the cement industry. The remaining reserve in developed areas is 151.4 billion tons, and the proven reserve in undeveloped areas 756 million tons. The demand for import coal was 11.25 million tons in 1996, and is expected to be 201.73 million tons in 2000. The paper pointed out some problems arising from coal production and spread of coal utilization, and described measures to solve the problems and fields where there are possibilities of Japan`s cooperation. 36 refs., 44 figs., 73 tabs.

  7. Interface

    DEFF Research Database (Denmark)

    Computerens interface eller grænseflade har spredt sig overalt. Mobiltelefoner, spilkonsoller, pc'er og storskærme indeholder computere – men computere indbygges også i tøj og andre hverdagslige genstande, så vi konstant har adgang til digitale data. Interface retter fokus mod, hvordan den digita...

  8. Interface

    DEFF Research Database (Denmark)

    Computerens interface eller grænseflade har spredt sig overalt. Mobiltelefoner, spilkonsoller, pc'er og storskærme indeholder computere – men computere indbygges også i tøj og andre hverdagslige genstande, så vi konstant har adgang til digitale data. Interface retter fokus mod, hvordan den digitale...... kunst og kultur skabes, spredes og opleves igennem interfaces. Forfatterne undersøger og diskuterer interfacets æstetik, ideologi og kultur – og analyserer aktuel interfacekunst på tværs af musik, kunst, litteratur og film. Bogen belyser interfacets oprindelse i den kolde krigs laboratorier og dets...

  9. interfaces

    Directory of Open Access Journals (Sweden)

    Dipayan Sanyal

    2005-01-01

    macroscopic conservation equations with an order parameter which can account for the solid, liquid, and the mushy zones with the help of a phase function defined on the basis of the liquid fraction, the Gibbs relation, and the phase diagram with local approximations. Using the above formalism for alloy solidification, the width of the diffuse interface (mushy zone was computed rather accurately for iron-carbon and ammonium chloride-water binary alloys and validated against experimental data from literature.

  10. Overall analysis report on the fiscal 1994 geothermal development promotion survey. No.C-2. Wasabizawa area (secondary); 1994 nendo chinetsu kaihatsu sokushin chosa sogo kaiseki hokokusho. No.C-2. Wasabizawa chiiki (dainiji)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-01-01

    The Wasabizawa area is located near the boundary between Yuzawa city south of Akita pref. and Ogachi-machi, Ogachi-gun, Akita pref, having a range of 3.0km northeast-southwest and 2.5km northwest-southeast of Wasabizawa almost as a center. The area for survey and its circumference are national forests, and the east and a part of the south of the area are designated as the Kurikoma quasi-national park third type special region. From the geochemical temperature distribution, it can be assumed that geothermal fluids of around 300{degree}C exist in the deep underground of the Kaminotai-Wasabizawa-Akinomiya area. From the distribution of density basements, the block structure of the basement can be estimated. Around the boundary of the ridge/sedimentation region of this density basement, fractures develop and the formation of reservoir structure is expected from the comparison with the result of the well survey. In the blowout test, obtained were 284.3{degree}C and 83.05 kgf/cm{sup 2} at a depth of 1,300m. In the geothermal system, it is assumed that reservoir structures of geothermal fluids develop in the deep underground of the central part of the area. The heat source to the geothermal system is supposed to be the magma reservoir remaining in Takamatsudake volcanic rocks. 110 refs., 177 figs., 105 tabs.

  11. Kinetic Interface

    DEFF Research Database (Denmark)

    2009-01-01

    A kinetic interface for orientation detection in a video training system is disclosed. The interface includes a balance platform instrumented with inertial motion sensors. The interface engages a participant's sense of balance in training exercises.......A kinetic interface for orientation detection in a video training system is disclosed. The interface includes a balance platform instrumented with inertial motion sensors. The interface engages a participant's sense of balance in training exercises....

  12. Interface Consistency

    DEFF Research Database (Denmark)

    Staunstrup, Jørgen

    1998-01-01

    This paper proposes that Interface Consistency is an important issue for the development of modular designs. Byproviding a precise specification of component interfaces it becomes possible to check that separately developedcomponents use a common interface in a coherent matter thus avoiding a very...... significant source of design errors. Awide range of interface specifications are possible, the simplest form is a syntactical check of parameter types.However, today it is possible to do more sophisticated forms involving semantic checks....

  13. Interface models

    DEFF Research Database (Denmark)

    Ravn, Anders P.; Staunstrup, Jørgen

    1994-01-01

    This paper proposes a model for specifying interfaces between concurrently executing modules of a computing system. The model does not prescribe a particular type of communication protocol and is aimed at describing interfaces between both software and hardware modules or a combination of the two....... The model describes both functional and timing properties of an interface...

  14. Trend survey of the global environment adaptation type industrial technology. Chikyu kankyo tekiogata sangyo gijutsu doko chosa. ; Chikyu kankyo kanren kenkyu doko no chosa (nisanka tanso no kankyo fuka teigensaku ni kansuru chosa kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    1992-03-01

    The paper studies the measures for reduction of environmental load of CO2 from the standpoint of chemical technology. As for methanol synthesis from CO2, accelerating of the reaction using Cu base compound catalyst is reported. Also, CO2 is methanated at high speed by low temperature waste heat using Ni-La2O3-Ru catalyst. Discussions are given on the subject for development of catalyst reaction relating to hydrogen production technology by methane reforming reaction using steam or CO2. Synthesis of polymetric materials by use of CO2 is also described. The paper mentions that it is indispensable to design high-function electrode and elucidate the reaction mechanism of electrochemical CO2 reduction for electrochemical and photochemical CO2 reduction measures. Moreover, in case of using solar energy, it is required to study photovoltaic excitation process in semiconductor electrode/ electrolyte solution interface. For production of hydrogen from CO2 by photosynthetic organisms and solar energy, the problem is control of inhibiting effect of oxygen combinedly produced. Described are production of polyhydroxy butyric acid and biodegradable polymer from CO2 and hydrogen by bacteria, and CO2 fixation imitating the enzyme reaction. 267 refs., 79 figs., 32 tabs.

  15. Fiscal 1998 research report on the history and succession of industrial technologies. Research on the originality and creativity of electric and electronic technologies in the Japanese industry; 1998 nendo chosa hokokusho. Sangyo gijutsu rekishi keisho chosa (kokunai sangyo no denki denshi gijutsu no dokusosei to sozosei no chosahen)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This report summarizes the interview survey results on development, introduction and succession of industrial technologies from pioneers with many concrete valuable experiences, aiming at technology succession and acquisition of suggestions. The interview survey was made on 'My course until now' and 'My electric power and slow concentrated accomplishment' from two pioneers, honorary professor Dr. Okamura Sogo of the University of Tokyo (department of electrical engineering), and honorary professor Dr. Miyaji Iwao of Nagoya University (department of electrical engineering). Dr. Okamura mentioned a precious encouraging word 'Learn the past for the future' for the young easy-to- lose sight of targets from the viewpoint that the 21st century is an age of education and welfare after the high economic growth age. Dr. Miyaji mentioned the basic attitude 'Continuity of selection day after day' and a precious word 'Maintain continuous friendship' for the young, leaving a deep impression to the interviewers. (NEDO)

  16. Interface dermatitis

    Directory of Open Access Journals (Sweden)

    Rajiv Joshi

    2013-01-01

    Full Text Available Interface dermatitis includes diseases in which the primary pathology involves the dermo-epidermal junction. The salient histological findings include basal cell vacuolization, apoptotic keratinocytes (colloid or Civatte bodies, and obscuring of the dermo-epidermal junction by inflammatory cells. Secondary changes of the epidermis and papillary dermis along with type, distribution and density of inflammatory cells are used for the differential diagnoses of the various diseases that exhibit interface changes. Lupus erythematosus, dermatomyositis, lichen planus, graft versus host disease, erythema multiforme, fixed drug eruptions, lichen striatus, and pityriasis lichenoides are considered major interface diseases. Several other diseases (inflammatory, infective, and neoplastic may show interface changes.

  17. Interface Screenings

    DEFF Research Database (Denmark)

    Thomsen, Bodil Marie Stavning

    2015-01-01

    and memories. From a transvisual perspective, the question is whether or not these (by now realized) diagrammatic modes involving the body in ubiquitous global media can be analysed in terms of the affects and events created in concrete interfaces. The examples used are filmic as felt sensations...... of an interface are invisible and not easy to describe....

  18. Fluid Interfaces

    DEFF Research Database (Denmark)

    Hansen, Klaus Marius

    2001-01-01

    Fluid interaction, interaction by the user with the system that causes few breakdowns, is essential to many user interfaces. We present two concrete software systems that try to support fluid interaction for different work practices. Furthermore, we present specificity, generality, and minimality...... as design goals for fluid interfaces....

  19. Interface Realisms

    DEFF Research Database (Denmark)

    Pold, Søren

    2005-01-01

    This article argues for seeing the interface as an important representational and aesthetic form with implications for postmodern culture and digital aesthetics. The interface emphasizes realism due in part to the desire for transparency in Human-Computer Interaction (HCI) and partly to the devel...

  20. Testing Interfaces

    DEFF Research Database (Denmark)

    Holbøll, Joachim T.; Henriksen, Mogens; Nilson, Jesper K.;

    1999-01-01

    The wide use of solid insulating materials combinations in combinations has introduced problems in the interfaces between components. The most common insulating materials are cross-linked polyethylene (XLPE), silicone rubber (SIR) and ethylene-propylene rubbers (EPR). Assemblies of these materials...... have caused major failures. In the Netherlands, a major black out was caused by interface problems in 150kV cable terminations, causing a cascade of breakdowns. There is a need to investigate the reasons for this and other similar breakdowns.The major problem is expected to lie in the interface between...... two different materials. Environmental influence, surface treatment, defects in materials and interface, design, pressure and rubbing are believed to have an effect on interface degradation. These factors are believed to increase the possibility of partial discharges (PD). PD will, with time, destroy...

  1. Microprocessor interfacing

    CERN Document Server

    Vears, R E

    2014-01-01

    Microprocessor Interfacing provides the coverage of the Business and Technician Education Council level NIII unit in Microprocessor Interfacing (syllabus U86/335). Composed of seven chapters, the book explains the foundation in microprocessor interfacing techniques in hardware and software that can be used for problem identification and solving. The book focuses on the 6502, Z80, and 6800/02 microprocessor families. The technique starts with signal conditioning, filtering, and cleaning before the signal can be processed. The signal conversion, from analog to digital or vice versa, is expl

  2. Survey of agent for intelligent information retrieval; Chiteki kensaku no tame no agent no chosa

    Energy Technology Data Exchange (ETDEWEB)

    Yazawa, T. [Central Research Institute of Electric Power Industry, Tokyo (Japan)

    1996-09-01

    Development of agent systems has been surveyed, to classify and arrange characteristic functions of the agents, and to grasp the realization situation of these agents in their development. In addition, prospective functions of information retrieval systems using the agents at maximum and functions to be developed among these in the future are clarified. The agents are characterized by the expression function, communication function, planning function, adaptive function, and learning function. The agents are desired to be classified into interface agents whose works are to respond to individual workers, coordinator agents which conduct works with high pervasion, such as assignment of works and their control, and task agents which conduct specialized works for individual examples. Thus, design and configuration of the agent system, and improvement and expansion of system functions can be effectively and easily conducted. 52 refs., 5 figs., 3 tabs.

  3. Designing Interfaces

    CERN Document Server

    Tidwell, Jenifer

    2010-01-01

    Despite all of the UI toolkits available today, it's still not easy to design good application interfaces. This bestselling book is one of the few reliable sources to help you navigate through the maze of design options. By capturing UI best practices and reusable ideas as design patterns, Designing Interfaces provides solutions to common design problems that you can tailor to the situation at hand. This updated edition includes patterns for mobile apps and social media, as well as web applications and desktop software. Each pattern contains full-color examples and practical design advice th

  4. Gesture Interfaces

    NARCIS (Netherlands)

    Fikkert, F.W.

    2007-01-01

    Take away mouse and keyboard. Now, how do you interact with a computer? Especially one that has a display that is the size of an entire wall. One possibility is through gesture interfaces. Remember Minority Report? Cool stuff, but that was already five years ago.. So, what is already possible now an

  5. Manufacturing Interfaces

    NARCIS (Netherlands)

    Houten, van F.J.A.M.

    1992-01-01

    The paper identifies the changing needs and requirements with respect to the interfacing of manufacturing functions. It considers the manufacturing system, its components and their relationships from the technological and logistic point of view, against the background of concurrent engineering. Desi

  6. Testing Interfaces

    DEFF Research Database (Denmark)

    Holbøll, Joachim T.; Henriksen, Mogens; Nilson, Jesper K.;

    1999-01-01

    The wide use of solid insulating materials combinations in combinations has introduced problems in the interfaces between components. The most common insulating materials are cross-linked polyethylene (XLPE), silicone rubber (SIR) and ethylene-propylene rubbers (EPR). Assemblies of these materials...

  7. Investigational research on welfare equipment needs/seeds adaptation; Fukushi kiki needs seeds tekigo chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-01

    At the advent of the aging society, investigated are images of welfare equipment to be developed. In the range where the use of welfare equipment is to be studied, the following are included: self care, excretion, transfer, and support of work other than care, as assistance to daily life; exercise function, communication function, and environment arrangement, as assistance to social participation. Of the images of the welfare equipment classified by the overall evaluation, the following are cited as what supports daily life: a lift usable even in the existing houses, a bump remover by which bumps in the house are removed without making large repairs, a urine collector for females, a training device to prevent urinary incontinence, reduction in the bed-fast elderly, a device to prevent bedsore, a system for safely watching demented old people, a system in which clothes are automatically washed, dried, and hanged on a hanger, etc. What supports social participation are a system for sports experience by virtual reality, sound user interface, etc. For the aged to be healthy physically and mentally, it is essential to be taken good care of and create things to live for by participating the society. For this, it is necessary that the government establish the public policies and that a people be conscious of welfare. 9 figs., 33 tabs.

  8. Interface learning

    DEFF Research Database (Denmark)

    Thorhauge, Sally

    2014-01-01

    "Interface learning - New goals for museum and upper secondary school collaboration" investigates and analyzes the learning that takes place when museums and upper secondary schools in Denmark work together in local partnerships to develop and carry out school-related, museum-based coursework...... for students. The research focuses on the learning that the students experience in the interface of the two learning environments: The formal learning environment of the upper secondary school and the informal learning environment of the museum. Focus is also on the learning that the teachers and museum...... professionals experience as a result of their collaboration. The dissertation demonstrates how a given partnership’s collaboration affects the students’ learning experiences when they are doing the coursework. The dissertation presents findings that museum-school partnerships can use in order to develop...

  9. Museets interface

    DEFF Research Database (Denmark)

    Pold, Søren

    2007-01-01

    Søren Pold gør sig overvejelser med udgangspunkt i museumsprojekterne Kongedragter.dk og Stigombord.dk. Han argumenterer for, at udviklingen af internettets interfaces skaber nye måder at se, forstå og interagere med kulturen på. Brugerne får nye medievaner og perceptionsmønstre, der må medtænkes i...

  10. Museets interface

    DEFF Research Database (Denmark)

    Pold, Søren

    2007-01-01

    Søren Pold gør sig overvejelser med udgangspunkt i museumsprojekterne Kongedragter.dk og Stigombord.dk. Han argumenterer for, at udviklingen af internettets interfaces skaber nye måder at se, forstå og interagere med kulturen på. Brugerne får nye medievaner og perceptionsmønstre, der må medtænkes i...

  11. Fiscal 1999 research report. Basic research for promotion of joint implementation programs (Comprehensive feasibility study on efficiency improvement of heat generation facility and heat network for district heating at middle and small cities in Moscow region, the Russian Federation - 2 model cities within the region); 1999 nendo Russia renpo Moscow shunai chusho toshi ni okeru chiiki danboyo netsu kyokyu shisetsu yusomo no koritsu kaizen keikaku sogo chosa hokokusho. Shunai 2 toshi wo model to suru

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    The above-named effort aims to work out modification plans and to predict their energy saving, energy substituting, and greenhouse gas reduction effects, and thereby to scout out a project which will effectively utilize flexibility-ensuring 'joint implementation' for the attainment of greenhouse gas reduction levels defined at COP3 (Third Session of the Conference of the Parties to the United Nations Framework Convention on Climate Change). The results of assessment of this project based on the outcome of the survey show that (1) there is necessity for the project and that the presence of needs to be urgently satisfied is clear, that (2) energy saving, energy substituting, and greenhouse gas reduction effects are proved to exist and that the project is therefore an appropriate candidate for an activity to be implemented jointly, that (3) Russian agencies concerned are strongly interested in the project and that a sufficiently cooperative system will be available toward implementation, and that (4) there is an extremely large room for energy saving in the district heating oriented heat supply business in Russia and that probabilities are quite high that natural gas-fired turbine cogeneration plants capable of improving overall energy efficiency will enjoy extensive diffusion. (NEDO)

  12. Fiscal 1998 survey report. Medical equipment (Development of fine sampling/analysis system for blood / Development of high-precision 3-D image diagnosis system / Development of low-invasion operation support system / Total development of artificial internal organ technologies); 1998 nendo chosa hokokusho. Iryo kiki (ketsuekinado biryo saishu, biryo bunseki system kaihatsu/koseido sanjigen eizo shindan system kaihatsu/teishinshu shujutsu shien system kaihatsu/jinko zoki gijutsu sogo kaihatsu)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    For efficient medical care supply systems, the R and D of advanced medical care technology and equipment largely contribute to productivity improvement for medical care services. Among them, a progress of medical care technology is becoming important for preparation of efficient and fair supply systems. MITI thus established 'Medical care and welfare equipment development project' in 1994, and has promoted the strategic long-term R and D project of medical care and welfare equipment as joint R and D project of NEDO and private enterprises. In fiscal 1998, on the development of the fine sampling/analysis system for blood, the high- precision 3-D image diagnosis system, the low-invasion operation support system, and the artificial internal organ technologies since fiscal 1996, this project clarified essential technical issues based on the future view, selected some themes to be newly developed in the future, and surveyed and evaluated the details of their R and D concretely. (NEDO)

  13. Effective risk management SOGO life cycle management

    OpenAIRE

    Ali, Mohamed Omar

    2012-01-01

    After new or upgrade projects the offshore installation gets maintenance or support through the life cycle management organization at Siemens. Small to medium modification projects are executed by the life cycle management. Risk assessment on these projects show different risks when it comes to estimation and pricing of projects, planning and executing, resource management, competence and knowledge.

  14. Effective risk management SOGO life cycle management

    OpenAIRE

    Ali, Mohamed Omar

    2012-01-01

    After new or upgrade projects the offshore installation gets maintenance or support through the life cycle management organization at Siemens. Small to medium modification projects are executed by the life cycle management. Risk assessment on these projects show different risks when it comes to estimation and pricing of projects, planning and executing, resource management, competence and knowledge.

  15. Interfaces habladas

    Directory of Open Access Journals (Sweden)

    María Teresa Soto Sanfiel

    2012-04-01

    Full Text Available Este artículo describe y piensa al fenómeno de las Interfaces habladas (IH desde variados puntos de vista y niveles de análisis. El texto se ha concebido con los objetivos específicos de: 1.- procurar una visión panorámica de aspectos de la producción y consumo comunicativo de las IH; 2.- ofrecer recomendaciones para su creación y uso eficaz, y 3.- llamar la atención sobre su proliferación e inspirar su estudio desde la comunicación. A pesar de la creciente presencia de las IF en nues-tras vidas cotidianas, hay ausencia de textos que las caractericen y analicen por sus aspectos comunicativos. El trabajo es pertinente porque el fenómeno significa un cambio respecto a estadios comunica-tivos precedentes con consecuencias en las concepciones intelectuales y emocionales de los usuarios. La proliferación de IH nos abre a nue-vas realidades comunicativas: hablamos con máquinas.

  16. Interface Simulation Distances

    Directory of Open Access Journals (Sweden)

    Pavol Černý

    2012-10-01

    Full Text Available The classical (boolean notion of refinement for behavioral interfaces of system components is the alternating refinement preorder. In this paper, we define a distance for interfaces, called interface simulation distance. It makes the alternating refinement preorder quantitative by, intuitively, tolerating errors (while counting them in the alternating simulation game. We show that the interface simulation distance satisfies the triangle inequality, that the distance between two interfaces does not increase under parallel composition with a third interface, and that the distance between two interfaces can be bounded from above and below by distances between abstractions of the two interfaces. We illustrate the framework, and the properties of the distances under composition of interfaces, with two case studies.

  17. After Rigid Interfaces

    DEFF Research Database (Denmark)

    Troiano, Giovanni Maria

    Deformable and shape-changing interfaces are rapidly emerging in the field of human-computer interaction (HCI). Deformable interfaces provide users with newer input possibilities such as bending, squeezing, or stretching, which were impossible to achieve with rigid interfaces. Shape-changing inte......Deformable and shape-changing interfaces are rapidly emerging in the field of human-computer interaction (HCI). Deformable interfaces provide users with newer input possibilities such as bending, squeezing, or stretching, which were impossible to achieve with rigid interfaces. Shape...

  18. After Rigid Interfaces

    DEFF Research Database (Denmark)

    Troiano, Giovanni Maria

    to convey particular information (e.g., big-isurgent, loud-is-up). The second work presents a large-scale analysis of 340 Sci-Fi movies that identifies instances of shape-changing interfaces. Results from the analysis reveals emergent behavioral patterns of shape change, namely Reconfiguration......Deformable and shape-changing interfaces are rapidly emerging in the field of human-computer interaction (HCI). Deformable interfaces provide users with newer input possibilities such as bending, squeezing, or stretching, which were impossible to achieve with rigid interfaces. Shape......-changing interfaces can reconfigure their shape dynamically, providing users with new affordances and output modalities. This thesis contributes to both the field of deformable interfaces and shape-changing interfaces through empirical research. In the area of deformable interfaces, this thesis presents two studies...

  19. Interface localization near criticality

    CERN Document Server

    Delfino, Gesualdo

    2016-01-01

    The theory of interface localization in near-critical planar systems at phase coexistence is formulated from first principles. We show that mutual delocalization of two interfaces, amounting to interfacial wetting, occurs when the bulk correlation length critical exponent $\

  20. Microcomputer interfacing and applications

    CERN Document Server

    Mustafa, M A

    1990-01-01

    This is the applications guide to interfacing microcomputers. It offers practical non-mathematical solutions to interfacing problems in many applications including data acquisition and control. Emphasis is given to the definition of the objectives of the interface, then comparing possible solutions and producing the best interface for every situation. Dr Mustafa A Mustafa is a senior designer of control equipment and has written many technical articles and papers on the subject of computers and their application to control engineering.

  1. Complex Interfaces Under Change

    DEFF Research Database (Denmark)

    Rosbjerg, Dan

    and mechanical processes that develop within this structure. Water-related processes at the interfaces between the compartments are complex, depending both on the interface itself, and on the characteristics of the interfaced compartments. Various aspects of global change directly or indirectly impact...

  2. Water at Interfaces

    DEFF Research Database (Denmark)

    Björneholm, Olle; Hansen, Martin Hangaard; Hodgson, Andrew

    2016-01-01

    The interfaces of neat water and aqueous solutions play a prominent role in many technological processes and in the environment. Examples of aqueous interfaces are ultrathin water films that cover most hydrophilic surfaces under ambient relative humidities, the liquid/solid interface which drives...

  3. Entanglement and topological interfaces

    CERN Document Server

    Brehm, Enrico M; Jaud, Daniel; Schmidt-Colinet, Cornelius

    2015-01-01

    In this paper we consider entanglement entropies in two-dimensional conformal field theories in the presence of topological interfaces. Tracing over one side of the interface, the leading term of the entropy remains unchanged. The interface however adds a subleading contribution, which can be interpreted as a relative (Kullback-Leibler) entropy with respect to the situation with no defect inserted. Reinterpreting boundaries as topological interfaces of a chiral half of the full theory, we rederive the left/right entanglement entropy in analogy with the interface case. We discuss WZW models and toroidal bosonic theories as examples.

  4. Quantization of interface currents

    Energy Technology Data Exchange (ETDEWEB)

    Kotani, Motoko [AIMR, Tohoku University, Sendai (Japan); Schulz-Baldes, Hermann [Department Mathematik, Universität Erlangen-Nürnberg, Erlangen (Germany); Villegas-Blas, Carlos [Instituto de Matematicas, Cuernavaca, UNAM, Cuernavaca (Mexico)

    2014-12-15

    At the interface of two two-dimensional quantum systems, there may exist interface currents similar to edge currents in quantum Hall systems. It is proved that these interface currents are macroscopically quantized by an integer that is given by the difference of the Chern numbers of the two systems. It is also argued that at the interface between two time-reversal invariant systems with half-integer spin, one of which is trivial and the other non-trivial, there are dissipationless spin-polarized interface currents.

  5. Interfacing with the WEB

    CERN Document Server

    Dönszelmann, M

    1995-01-01

    Interfacing to the Web or programming interfaces for the Web is used to provide dynamic information for Web users. Using the Web as a transport system of information poses three constraints: namespace, statelessness and performance. To build interfaces on either server or client side of the Web one has to meet these constraints. Several examples, currently in use in High Energy Physics Experiments are described. They range from an interface to show where buildings are located to an interface showing active values of the On-line System of the DELPHI (CERN)..

  6. Leading research and study report for fiscal 1998. Report on leading research and study on intelligent fiber; 1998 nendo sendo chosa kenkyu hokokusho. Inteligent fiber sendo chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Researches were conducted with a view to organizing projects for developing intelligent fibers, equipped with environmental friendliness and amenity without being deprived of their original properties as structural and clothing materials, the ultimate goal of the effort being the creation of harbingers of next-generation fibers which would contribute to the advance of industries related to environments, medicine and welfare, and information. What were learned from fiscal 1998 researches are mentioned below. The strength that the general-purpose fibers currently in use exhibit is so small as to be but several percent of what is theoretically predicted for them. Demand will increase a great deal if the actual strength is doubled, for which new technologies have to be developed including those involving super-fiber texture control. For providing the fiber with such functions as environment-friendliness, amenity, etc., it is necessary to develop phasal structure control technologies with regard to fiber morphology, surface texture, etc. For success in practical application in the future of such super-fiber materials, each specimen needs to be manufactured in the order of kilogram by way of trial. Moreover, fiber evaluation techniques have to be developed in the three domains of software, hardware, and interface. (NEDO)

  7. Leading research report for fiscal 1998 on the super-survey (Next-generation underground exploration technology); 1998 nendo super survey (jisedai chika tansa gijutsu) no chosa kenkyu sendo chosa kenkyu hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    Researches are conducted on innovative mineral resources exploration technologies which use seismic waves or scattered electromagnetic waves to grasp the 3-dimensional structure in the ground. In fiscal 1998, a concrete research and development program is formulated, under which the seismic method and electromagnetic method will deal with an approximately 1km{sup 2}-large area of metalliferous deposit seated approximately 500m deep. In addition, researches are conducted overseas on the trend of related technologies. At an NMR (nuclear magnetic resonance) workshop held at the Society of Exploration Geophysicist, U.S., application of the NMR method to water is suggested. At a European Geophysical Society of environmental research and civil engineering event, useful knowledge is acquired about a 4-dimensional sounding (monitoring) technique in which a time axis is added to the 3-dimensional sounding technique and a high-resolution high-efficiency sounding system for probing shallow layers. During visits at Australian institutes concerned with the electromagnetic sounding technology, the trend of probing technologies especially those using the superconducting quantum interface device (SQUID) is gasped. (NEDO)

  8. Refinement by interface instantiation

    DEFF Research Database (Denmark)

    Hallerstede, Stefan; Hoang, Thai Son

    2012-01-01

    be easily refined. Our first contribution hence is a proposal for a new construct called interface that encapsulates the external variables, along with a mechanism for interface instantiation. Using the new construct and mechanism, external variables can be refined consistently. Our second contribution...... is an approach for verifying the correctness of Event-B extensions using the supporting Rodin tool. We illustrate our approach by proving the correctness of interface instantiation....

  9. Popeye Project: ROV interface

    Energy Technology Data Exchange (ETDEWEB)

    Scates, C.R.; Hernandez, D.A.; Hickok, D.D.

    1996-12-31

    This paper discusses the Remote Operated Vehicle (ROV) interface with the Popeye Project Subsea System. It describes the ROV-related plans, design philosophies, intervention tasks, tooling/equipment requirements, testing activities, and offshore installation experiences. Early identification and continuous consideration of the ROV interfaces significantly improved the overall efficiency of equipment designs and offshore operations. The Popeye Project helped advance the technology and standardization of ROV interfaces for deep water subsea production systems.

  10. Turbomachine Interface Sealing

    Science.gov (United States)

    Hendricks, Robert C.; Chupp, Raymond E.; Lattime, Scott B.; Steinetz, Bruce M.

    2005-01-01

    Sealing interfaces and coatings, like lubricants, are sacrificial, giving up their integrity for the benefit of the component. Clearance control is a major issue in power systems turbomachine design and operational life. Sealing becomes the most cost-effective way to enhance system performance. Coatings, films, and combined use of both metals and ceramics play a major role in maintaining interface clearances in turbomachine sealing and component life. This paper focuses on conventional and innovative materials and design practices for sealing interfaces.

  11. Universal computer interfaces

    CERN Document Server

    Dheere, RFBM

    1988-01-01

    Presents a survey of the latest developments in the field of the universal computer interface, resulting from a study of the world patent literature. Illustrating the state of the art today, the book ranges from basic interface structure, through parameters and common characteristics, to the most important industrial bus realizations. Recent technical enhancements are also included, with special emphasis devoted to the universal interface adapter circuit. Comprehensively indexed.

  12. Electromagnetic Interface Testing Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The Electromagnetic Interface Testing facilitysupports such testing asEmissions, Field Strength, Mode Stirring, EMP Pulser, 4 Probe Monitoring/Leveling System, and...

  13. Shape-changing interfaces:

    DEFF Research Database (Denmark)

    Rasmussen, Majken Kirkegård; Pedersen, Esben Warming; Petersen, Marianne Graves;

    2015-01-01

    these shortcomings. We identify eight types of shape that are transformed in various ways to serve both functional and hedonic design purposes. Interaction with shape-changing interfaces is simple and rarely merges input and output. Three questions are discussed based on the review: (a) which design purposes may......Shape change is increasingly used in physical user interfaces, both as input and output. Yet, the progress made and the key research questions for shape-changing interfaces are rarely analyzed systematically. We review a sample of existing work on shape-changing interfaces to address...

  14. Shape-changing interfaces:

    DEFF Research Database (Denmark)

    Rasmussen, Majken Kirkegård; Pedersen, Esben Warming; Petersen, Marianne Graves

    2015-01-01

    Shape change is increasingly used in physical user interfaces, both as input and output. Yet, the progress made and the key research questions for shape-changing interfaces are rarely analyzed systematically. We review a sample of existing work on shape-changing interfaces to address these shortc...... shape-changing interfaces be used for, (b) which parts of the design space are not well understood, and (c) why studying user experience with shape-changing interfaces is important.......Shape change is increasingly used in physical user interfaces, both as input and output. Yet, the progress made and the key research questions for shape-changing interfaces are rarely analyzed systematically. We review a sample of existing work on shape-changing interfaces to address...... these shortcomings. We identify eight types of shape that are transformed in various ways to serve both functional and hedonic design purposes. Interaction with shape-changing interfaces is simple and rarely merges input and output. Three questions are discussed based on the review: (a) which design purposes may...

  15. Interfaces Between Second Interfaces Between Second

    Directory of Open Access Journals (Sweden)

    Celso Henrique Soufen Tumolo

    2008-04-01

    Full Text Available The book Interfaces Between Second Language Acquisition and Language Testing Research was edited with the concern of bringing together various researchers who have tried to overcome the separation of the two areas, SLA and LT, by raising and discussing relevant issues related to both. The book Interfaces Between Second Language Acquisition and Language Testing Research was edited with the concern of bringing together various researchers who have tried to overcome the separation of the two areas, SLA and LT, by raising and discussing relevant issues related to both.

  16. Trend survey of the global environment adaptation type industrial technology. Trend survey of global environment related studies (researches on measureds for reduction of environmental load of CO2); Chikyu kankyo tekiogata sangyo gijutsu doko chosa. Chikyu kankyo kanren kenkyu doko no chosa (nisanka tanso no kankyo fuka teigensaku ni kansuru chosa kenkyu)

    Energy Technology Data Exchange (ETDEWEB)

    1992-03-01

    The paper studies the measures for reduction of environmental load of CO2 from the standpoint of chemical technology. As for methanol synthesis from CO2, accelerating of the reaction using Cu base compound catalyst is reported. Also, CO2 is methanated at high speed by low temperature waste heat using Ni-La2O3-Ru catalyst. Discussions are given on the subject for development of catalyst reaction relating to hydrogen production technology by methane reforming reaction using steam or CO2. Synthesis of polymetric materials by use of CO2 is also described. The paper mentions that it is indispensable to design high-function electrode and elucidate the reaction mechanism of electrochemical CO2 reduction for electrochemical and photochemical CO2 reduction measures. Moreover, in case of using solar energy, it is required to study photovoltaic excitation process in semiconductor electrode/ electrolyte solution interface. For production of hydrogen from CO2 by photosynthetic organisms and solar energy, the problem is control of inhibiting effect of oxygen combinedly produced. Described are production of polyhydroxy butyric acid and biodegradable polymer from CO2 and hydrogen by bacteria, and CO2 fixation imitating the enzyme reaction. 267 refs., 79 figs., 32 tabs.

  17. Interface or Interlace?

    DEFF Research Database (Denmark)

    Hansen, Lone Koefoed; Wamberg, Jacob

    2005-01-01

    Departing from an analysis of the computer's indeterminate location between medium and machine, this paper problematises the idea of a clear-cut interface in complex computing, especially Augmented Reality. The idea and pratice of the interface is derived from the medium as a representational...

  18. Verden som interface

    DEFF Research Database (Denmark)

    2007-01-01

    Oversættelse af Peter Weibels tekst "The World as Interface" i Passepartout # 27. Interfacekulturens æstetik. Udgivelsesdato: 28.04.07......Oversættelse af Peter Weibels tekst "The World as Interface" i Passepartout # 27. Interfacekulturens æstetik. Udgivelsesdato: 28.04.07...

  19. Interfaces in nanoscale photovoltaics

    NARCIS (Netherlands)

    Öner, S.Z.

    2016-01-01

    This thesis deals with material interfaces in nanoscale photovoltaics. Interface properties between the absorbing semiconductor and other employed materials are crucial for an efficient solar cell. While the optical properties are largely unaffected by a few nanometer thin layer, the electronic prop

  20. Interfaces in nanoscale photovoltaics

    NARCIS (Netherlands)

    Öner, S.Z.

    2016-01-01

    This thesis deals with material interfaces in nanoscale photovoltaics. Interface properties between the absorbing semiconductor and other employed materials are crucial for an efficient solar cell. While the optical properties are largely unaffected by a few nanometer thin layer, the electronic prop

  1. The User Interface.

    Science.gov (United States)

    Lindeman, Martha J.; And Others

    1989-01-01

    The first of three articles on the design of user interfaces for information retrieval systems discusses the need to examine types of display, prompting, and input as separate entities. The second examines the use of artificial intelligence in creating natural language interfaces, and the third outlines standards for case studies in human computer…

  2. Designing the Instructional Interface.

    Science.gov (United States)

    Lohr, L. L.

    2000-01-01

    Designing the instructional interface is a challenging endeavor requiring knowledge and skills in instructional and visual design, psychology, human-factors, ergonomic research, computer science, and editorial design. This paper describes the instructional interface, the challenges of its development, and an instructional systems approach to its…

  3. Entanglement and topological interfaces

    Energy Technology Data Exchange (ETDEWEB)

    Brehm, E.; Brunner, I.; Jaud, D.; Schmidt-Colinet, C. [Arnold Sommerfeld Center, Ludwig-Maximilians-Universitaet, Theresienstrasse 37, 80333, Muenchen (Germany)

    2016-06-15

    In this paper we consider entanglement entropies in two-dimensional conformal field theories in the presence of topological interfaces. Tracing over one side of the interface, the leading term of the entropy remains unchanged. The interface however adds a subleading contribution, which can be interpreted as a relative (Kullback-Leibler) entropy with respect to the situation with no defect inserted. Reinterpreting boundaries as topological interfaces of a chiral half of the full theory, we rederive the left/right entanglement entropy in analogy with the interface case. We discuss WZW models and toroidal bosonic theories as examples. (copyright 2016 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  4. User Interface History

    DEFF Research Database (Denmark)

    Jørgensen, Anker Helms; Myers, Brad A

    2008-01-01

    User Interfaces have been around as long as computers have existed, even well before the field of Human-Computer Interaction was established. Over the years, some papers on the history of Human-Computer Interaction and User Interfaces have appeared, primarily focusing on the graphical interface era...... and early visionaries such as Bush, Engelbart and Kay. With the User Interface being a decisive factor in the proliferation of computers in society and since it has become a cultural phenomenon, it is time to paint a more comprehensive picture of its history. This SIG will investigate the possibilities...... of  launching a concerted effort towards creating a History of User Interfaces. ...

  5. Overview of FY1997 human media technology R and D; 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu seido Shin energy Sangyo Gijutsu sogo Kaihatsu Kiko itaku jigyo. Human media no kenkyu kaihatsu seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    This paper reports a summary of results in fiscal 1997 of research and development of human media technology. Fiscal 1997 launched design and trial fabrication of the following items: interface to improve efficiency and safety of plant operators, accommodation of multimedia contents to aid Kansei design, city development design aiding technologies using contents retrieval and presentation technologies and virtual reality, and empirical evaluation technologies for safety, comfort and convenience. Specific study assignments were extracted on a virtual media technology, a Kansei media technology and a knowledge media technology being three elementary technologies for human media to make clear the research and development approaches to be taken in the coming fiscal years. In addition, a human media technology committee, a research and development working group, and an investigation working group were established. Also launched were investigations on research trends in the human media technology, and investigative researches on contacts of information needs in industries with human media. 59 refs., 114 figs., 24 tabs.

  6. The interface effect

    CERN Document Server

    Galloway, Alexander R

    2013-01-01

    Interfaces are back, or perhaps they never left. The familiar Socratic conceit from the Phaedrus, of communication as the process of writing directly on the soul of the other, has returned to center stage in today's discussions of culture and media. Indeed Western thought has long construed media as a grand choice between two kinds of interfaces. Following the optimistic path, media seamlessly interface self and other in a transparent and immediate connection. But, following the pessimistic path, media are the obstacles to direct communion, disintegrating self and other into misunderstanding

  7. Operator interface for vehicles

    Science.gov (United States)

    Bissontz, Jay E

    2015-03-10

    A control interface for drivetrain braking provided by a regenerative brake and a non-regenerative brake is implemented using a combination of switches and graphic interface elements. The control interface comprises a control system for allocating drivetrain braking effort between the regenerative brake and the non-regenerative brake, a first operator actuated control for enabling operation of the drivetrain braking, and a second operator actuated control for selecting a target braking effort for drivetrain braking. A graphic display displays to an operator the selected target braking effort and can be used to further display actual braking effort achieved by drivetrain braking.

  8. The Java Legacy Interface

    DEFF Research Database (Denmark)

    Korsholm, Stephan

    2007-01-01

    The Java Legacy Interface is designed to use Java for encapsulating native legacy code on small embedded platforms. We discuss why existing technologies for encapsulating legacy code (JNI) is not sufficient for an important range of small embedded platforms, and we show how the Java Legacy...... Interface offers this previously missing functionality. We describe an implementation of the Java Legacy Interface for a particular virtual machine, and how we have used this virtual machine to integrate Java with an existing, commercial, soft real-time, C/C++ legacy platform....

  9. The Java Legacy Interface

    DEFF Research Database (Denmark)

    Korsholm, Stephan

    2007-01-01

    The Java Legacy Interface is designed to use Java for encapsulating native legacy code on small embedded platforms. We discuss why existing technologies for encapsulating legacy code (JNI) is not sufficient for an important range of small embedded platforms, and we show how the Java Legacy...... Interface offers this previously missing functionality. We describe an implementation of the Java Legacy Interface for a particular virtual machine, and how we have used this virtual machine to integrate Java with an existing, commercial, soft real-time, C/C++ legacy platform....

  10. The computer graphics interface

    CERN Document Server

    Steinbrugge Chauveau, Karla; Niles Reed, Theodore; Shepherd, B

    2014-01-01

    The Computer Graphics Interface provides a concise discussion of computer graphics interface (CGI) standards. The title is comprised of seven chapters that cover the concepts of the CGI standard. Figures and examples are also included. The first chapter provides a general overview of CGI; this chapter covers graphics standards, functional specifications, and syntactic interfaces. Next, the book discusses the basic concepts of CGI, such as inquiry, profiles, and registration. The third chapter covers the CGI concepts and functions, while the fourth chapter deals with the concept of graphic obje

  11. Interface Anywhere Project

    Data.gov (United States)

    National Aeronautics and Space Administration — To illustrate the viability of this technology, a prototype Natural User Interface (NUI) was developed as a proof-of-concept for system control.  Gesture and...

  12. Space as interface

    DEFF Research Database (Denmark)

    Lykke-Olesen, Andreas

    2006-01-01

    of interactive systems through the Ph.D. project, I have identified different significant aspects in the relation between space and interface. Based on empirical work, I distill a fragment of work concerned with cameras as the interface for bridging the gap between physical and digital space. By looking across...... multiple projects spanning over fields such as tangible user interfaces, augmented reality, and mobile computing, a conceptual framework characterizing camera-based mixed interaction spaces is developed. To show the applicability of the framework, it is deployed on one of the presented cases and discussed...... to conceptualize space as more than the physical container for human activity. I do this by investigating space as interface. Based on a theory of space and place set forth by Tuan (Tuan, 1977), and informed by an explorative research approach, I make the distinction between space and place as a Euclidian space...

  13. Interface-Based Design

    Science.gov (United States)

    2004-01-01

    Lecture Notes in Computer Science 1466, pages 163–178. Springer-Verlag, 1998. A. Chakrabarti, L. de Alfaro, T.A...Henzinger, M. Jurdziński, and F.Y.C. Mang. Interface compatibility checking for software modules. In Proc. Computer-Aided Verification, Lecture Notes in Computer Science 2404...bidirectional component interfaces. In Proc. Computer-Aided Verification, Lecture Notes in Computer Science 2404, pages 414–427.

  14. Interfaces: nanometric dielectrics

    Energy Technology Data Exchange (ETDEWEB)

    Lewis, T J [School of Informatics, University of Wales Bangor, Dean Street, Bangor, Gwynedd, LL70 9PX (United Kingdom)

    2005-01-21

    The incorporation of nanometric size particles in a matrix to form dielectric composites shows promise of materials (nanodielectrics) with new and improved properties. It is argued that the properties of the interfaces between the particles and the matrix, which will themselves be of nanometric dimensions, will have an increasingly dominant role in determining dielectric performance as the particle size decreases. The forces that determine the electrical and dielectric properties of interfaces are considered, with emphasis on the way in which they might influence composite behaviour. A number of examples are given in which interfaces at the nanometric level exercise both passive and active control over dielectric, optical and conductive properties. Electromechanical properties are also considered, and it is shown that interfaces have important electrostrictive and piezoelectric characteristics. It is demonstrated that the process of poling, namely subjecting macroscopic composite materials to electrical stress and raised temperatures to create piezoelectric materials, can be explained in terms of optimizing the collective response of the nanometric interfaces involved. If the electrical and electromechanical features are coupled to the long-established electrochemical properties, interfaces represent highly versatile active elements with considerable potential in nanotechnology.

  15. Interfaces: nanometric dielectrics

    Science.gov (United States)

    Lewis, T. J.

    2005-01-01

    The incorporation of nanometric size particles in a matrix to form dielectric composites shows promise of materials (nanodielectrics) with new and improved properties. It is argued that the properties of the interfaces between the particles and the matrix, which will themselves be of nanometric dimensions, will have an increasingly dominant role in determining dielectric performance as the particle size decreases. The forces that determine the electrical and dielectric properties of interfaces are considered, with emphasis on the way in which they might influence composite behaviour. A number of examples are given in which interfaces at the nanometric level exercise both passive and active control over dielectric, optical and conductive properties. Electromechanical properties are also considered, and it is shown that interfaces have important electrostrictive and piezoelectric characteristics. It is demonstrated that the process of poling, namely subjecting macroscopic composite materials to electrical stress and raised temperatures to create piezoelectric materials, can be explained in terms of optimizing the collective response of the nanometric interfaces involved. If the electrical and electromechanical features are coupled to the long-established electrochemical properties, interfaces represent highly versatile active elements with considerable potential in nanotechnology.

  16. Lectures on random interfaces

    CERN Document Server

    Funaki, Tadahisa

    2016-01-01

    Interfaces are created to separate two distinct phases in a situation in which phase coexistence occurs. This book discusses randomly fluctuating interfaces in several different settings and from several points of view: discrete/continuum, microscopic/macroscopic, and static/dynamic theories. The following four topics in particular are dealt with in the book. Assuming that the interface is represented as a height function measured from a fixed-reference discretized hyperplane, the system is governed by the Hamiltonian of gradient of the height functions. This is a kind of effective interface model called ∇φ-interface model. The scaling limits are studied for Gaussian (or non-Gaussian) random fields with a pinning effect under a situation in which the rate functional of the corresponding large deviation principle has non-unique minimizers. Young diagrams determine decreasing interfaces, and their dynamics are introduced. The large-scale behavior of such dynamics is studied from the points of view of the hyd...

  17. High temperature interface superconductivity

    Energy Technology Data Exchange (ETDEWEB)

    Gozar, A., E-mail: adrian.gozar@yale.edu [Yale University, New Haven, CT 06511 (United States); Bozovic, I. [Yale University, New Haven, CT 06511 (United States); Brookhaven National Laboratory, Upton, NY 11973 (United States)

    2016-02-15

    Highlight: • This review article covers the topic of high temperature interface superconductivity. • New materials and techniques used for achieving interface superconductivity are discussed. • We emphasize the role played by the differences in structure and electronic properties at the interface with respect to the bulk of the constituents. - Abstract: High-T{sub c} superconductivity at interfaces has a history of more than a couple of decades. In this review we focus our attention on copper-oxide based heterostructures and multi-layers. We first discuss the technique, atomic layer-by-layer molecular beam epitaxy (ALL-MBE) engineering, that enabled High-T{sub c} Interface Superconductivity (HT-IS), and the challenges associated with the realization of high quality interfaces. Then we turn our attention to the experiments which shed light on the structure and properties of interfacial layers, allowing comparison to those of single-phase films and bulk crystals. Both ‘passive’ hetero-structures as well as surface-induced effects by external gating are discussed. We conclude by comparing HT-IS in cuprates and in other classes of materials, especially Fe-based superconductors, and by examining the grand challenges currently laying ahead for the field.

  18. Workshop on Interface Phenomena

    CERN Document Server

    Kreuzer, Hans

    1987-01-01

    This book contains the proceedings of the first Workshop on Interface Phenomena, organized jointly by the surface science groups at Dalhousie University and the University of Maine. It was our intention to concentrate on just three topics related to the kinetics of interface reactions which, in our opinion, were frequently obscured unnecessarily in the literature and whose fundamental nature warranted an extensive discussion to help clarify the issues, very much in the spirit of the Discussions of the Faraday Society. Each session (day) saw two principal speakers expounding the different views; the session chairmen were asked to summarize the ensuing discussions. To understand the complexity of interface reactions, paradigms must be formulated to provide a framework for the interpretation of experimen­ tal data and for the construction of theoretical models. Phenomenological approaches have been based on a small number of rate equations for the concentrations or mole numbers of the various species involved i...

  19. User interface design considerations

    DEFF Research Database (Denmark)

    Andersen, Simon Engedal; Jakobsen, Arne; Rasmussen, Bjarne D.

    1999-01-01

    When designing a user interface for a simulation model there are several important issues to consider: Who is the target user group, and which a priori information can be expected. What questions do the users want answers to and what questions are answered using a specific model?When developing...... the user interface of EESCoolTools these issues led to a series of simulation tools each with a specific purpose and a carefully selected set of input and output variables. To allow a more wide range of questions to be answered by the same model, the user can change between different sets of input...... and output variables. This feature requires special attention when designing the user interface and a special approach for controlling the user selection of input and output variables are developed. To obtain a consistent system description the different input variables are grouped corresponding...

  20. Portraying User Interface History

    DEFF Research Database (Denmark)

    Jørgensen, Anker Helms

    2008-01-01

    in that they largely address prevailing UI techno­logies, and thirdly history from above in that they focus on the great deeds of the visionaries. The paper then compares this state-of-art in UI history to the much more mature fields history of computing and history of technology. Based hereon, some speculations......The user interface is coming of age. Papers adressing UI history have appeared in fair amounts in the last 25 years. Most of them address particular aspects such as an in­novative interface paradigm or the contribution of a visionary or a research lab. Contrasting this, papers addres­sing UI...... history at large have been sparse. However, a small spate of publications appeared recently, so a reasonable number of papers are available. Hence this work-in-progress paints a portrait of the current history of user interfaces at large. The paper first describes a theoretical framework recruited from...

  1. An Abstract Data Interface

    Science.gov (United States)

    Allan, D. J.

    The Abstract Data Interface (ADI) is a system within which both abstract data models and their mappings on to file formats can be defined. The data model system is object-oriented and closely follows the Common Lisp Object System (CLOS) object model. Programming interfaces in both C and \\fortran are supplied, and are designed to be simple enough for use by users with limited software skills. The prototype system supports access to those FITS formats most commonly used in the X-ray community, as well as the Starlink NDF data format. New interfaces can be rapidly added to the system---these may communicate directly with the file system, other ADI objects or elsewhere (e.g., a network connection).

  2. Urban water interfaces

    Science.gov (United States)

    Gessner, M. O.; Hinkelmann, R.; Nützmann, G.; Jekel, M.; Singer, G.; Lewandowski, J.; Nehls, T.; Barjenbruch, M.

    2014-06-01

    Urban water systems consist of large-scale technical systems and both natural and man-made water bodies. The technical systems are essential components of urban infrastructure for water collection, treatment, storage and distribution, as well as for wastewater and runoff collection and subsequent treatment. Urban aquatic ecosystems are typically subject to strong human influences, which impair the quality of surface and ground waters, often with far-reaching impacts on downstream aquatic ecosystems and water users. The various surface and subsurface water bodies in urban environments can be viewed as interconnected compartments that are also extensively intertwined with a range of technical compartments of the urban water system. As a result, urban water systems are characterized by fluxes of water, solutes, gases and energy between contrasting compartments of a technical, natural or hybrid nature. Referred to as urban water interfaces, boundaries between and within these compartments are often specific to urban water systems. Urban water interfaces are generally characterized by steep physical and biogeochemical gradients, which promote high reaction rates. We hypothesize that they act as key sites of processes and fluxes with notable effects on overall system behaviour. By their very nature, urban water interfaces are heterogeneous and dynamic. Therefore, they increase spatial heterogeneity in urban areas and are also expected to contribute notably to the temporal dynamics of urban water systems, which often involve non-linear interactions and feedback mechanisms. Processes at and fluxes across urban water interfaces are complex and less well understood than within well-defined, homogeneous compartments, requiring both empirical investigations and new modelling approaches at both the process and system level. We advocate an integrative conceptual framework of the urban water system that considers interfaces as a key component to improve our fundamental

  3. Politics at the interface

    DEFF Research Database (Denmark)

    Kannabiran, Gobinaath; Petersen, Marianne Graves

    2010-01-01

    the process of design and into how users interact with the designed product on a day-to-day basis. This paper is an attempt to call to attention the need for a new set of methods, attitudes and approaches, along with the existing, to discuss, analyze and reflect upon the politics at the interface....... By presenting a critical analysis of two design cases, we elicit the importance of such an agenda and the implications for design in doing so. We use the Foucauldian notion of power to analyze the power relationships in these two cases and to articulate the politics at the interface. We conclude by emphasizing...

  4. Semiconductor Oxide Interface States.

    Science.gov (United States)

    1981-05-01

    0C for 30 minutes. B 9 7 and B17 curves were taken before forming gas annealing and A297 and A77 were taken after annealing in forming gas... A297 and A77’ AL .show a substantial reduction of interface states and a slight increase of positive oxide charges. The reduction of the interface...states is deduced from the voltage differences between A297 and the A77 C-V curves both above and below the cross-over point which are smaller than the

  5. Optical encryption interface

    Science.gov (United States)

    Jackson, Deborah J. (Inventor)

    1998-01-01

    An analog optical encryption system based on phase scrambling of two-dimensional optical images and holographic transformation for achieving large encryption keys and high encryption speed. An enciphering interface uses a spatial light modulator for converting a digital data stream into a two dimensional optical image. The optical image is further transformed into a hologram with a random phase distribution. The hologram is converted into digital form for transmission over a shared information channel. A respective deciphering interface at a receiver reverses the encrypting process by using a phase conjugate reconstruction of the phase scrambled hologram.

  6. Distributed User Interfaces

    CERN Document Server

    Gallud, Jose A; Penichet, Victor M R

    2011-01-01

    The recent advances in display technologies and mobile devices is having an important effect on the way users interact with all kinds of devices (computers, mobile devices, laptops, tablets, and so on). These are opening up new possibilities for interaction, including the distribution of the UI (User Interface) amongst different devices, and implies that the UI can be split and composed, moved, copied or cloned among devices running the same or different operating systems. These new ways of manipulating the UI are considered under the emerging topic of Distributed User Interfaces (DUIs). DUIs

  7. The Liquid Vapour Interface

    DEFF Research Database (Denmark)

    Als-Nielsen, Jens Aage

    1985-01-01

    In this short review we are concerned with the density variation across the liquid-vapour interface, i.e. from the bulk density of the liquid to the essentially zero density of the vapour phase. This density variation can in principle be determined from the deviation of the reflectivity from...

  8. Photochemistry at Interfaces

    Energy Technology Data Exchange (ETDEWEB)

    Eisenthal, Kenneth B [Columbia Univ., New York, NY (United States)

    2015-02-24

    We have advanced our capabilities to investigate ultrafast excited state dynamics at a liquid interface using a pump to excite molecules to higher electronic states and then probe the subsequent time evolution of the interfacial molecules with femtosecond time delayed vibrational SFG.

  9. Soldier-Computer Interface

    Science.gov (United States)

    2015-01-27

    understandable units. (5) Immediate Feedback : Operators should always be presented with readily understandable information so that they know...operation, system response time, and special commands. d. Feedback : Operators should always be presented with readily understandable information on...considerations (handedness, physical strength, wearing of eyeglasses, and facility of spoken English). TABLE 3. SOLDIER-COMPUTER INTERFACE CRITERIA

  10. Is the interface OK?

    Digital Repository Service at National Institute of Oceanography (India)

    Suresh, T.

    When a peripheral device fails, software methods can be initially resorted to before the usual hardware test procedures are used. A test program is presented here that allows various peripherals, inter-faced to a Norsk Data computer, to be tested...

  11. General purpose operator interface

    Energy Technology Data Exchange (ETDEWEB)

    Bennion, S. I.

    1979-07-01

    The Hanford Engineering Development Laboratory in Richland, Washington is developing a general-purpose operator interface for controlling set-point driven processes. The interface concept is being developed around graphics display devices with touch-sensitive screens for direct interaction with the displays. Additional devices such as trackballs and keyboards are incorporated for the operator's convenience, but are not necessary for operation. The hardware and software are modular; only those capabilities needed for a particular application need to be used. The software is written in FORTRAN IV with minimal use of operating system calls to increase portability. Several ASCII files generated by the user define displays and correlate the display variables with the process parameters. It is also necessary for the user to build an interface routine which translates the internal graphics commands into device-specific commands. The interface is suited for both continuous flow processes and unit operations. An especially useful feature for controlling unit operations is the ability to generate and execute complex command sequences from ASCII files. This feature relieves operators of many repetitive tasks. 2 figures.

  12. Urban Sound Interfaces

    DEFF Research Database (Denmark)

    Breinbjerg, Morten

    2012-01-01

    This paper draws on the theories of Michel de Certeau and Gaston Bachelard to discuss how media architecture, in the form of urban sound interfaces, can help us perceive the complexity of the spaces we inhabit, by exploring the history and the narratives of the places in which we live...

  13. Source interface for ALICE

    CERN Multimedia

    Patrice Loïez

    2001-01-01

    This interface is part of the ALICE detector data link (DDL), which transmits data at 100 Mbytes/sec from the detectors to a host computer. A total of 400 DDLs will be installed on ALICE. These silicon devices have been developed especially for use in the high radiation levels produced in detector environments.

  14. Workflow User Interfaces Patterns

    Directory of Open Access Journals (Sweden)

    Jean Vanderdonckt

    2012-03-01

    Full Text Available Este trabajo presenta una colección de patrones de diseño de interfaces de usuario para sistemas de información para el flujo de trabajo; la colección incluye cuarenta y tres patrones clasificados en siete categorías identificados a partir de la lógica del ciclo de vida de la tarea sobre la base de la oferta y la asignación de tareas a los responsables de realizarlas (i. e. recursos humanos durante el flujo de trabajo. Cada patrón de la interfaz de usuario de flujo de trabajo (WUIP, por sus siglas en inglés se caracteriza por las propiedades expresadas en el lenguaje PLML para expresar patrones y complementado por otros atributos y modelos que se adjuntan a dicho modelo: la interfaz de usuario abstracta y el modelo de tareas correspondiente. Estos modelos se especifican en un lenguaje de descripción de interfaces de usuario. Todos los WUIPs se almacenan en una biblioteca y se pueden recuperar a través de un editor de flujo de trabajo que vincula a cada patrón de asignación de trabajo a su WUIP correspondiente.A collection of user interface design patterns for workflow information systems is presented that contains forty three resource patterns classified in seven categories. These categories and their corresponding patterns have been logically identified from the task life cycle based on offering and allocation operations. Each Workflow User Interface Pattern (WUIP is characterized by properties expressed in the PLML markup language for expressing patterns and augmented by additional attributes and models attached to the pattern: the abstract user interface and the corresponding task model. These models are specified in a User Interface Description Language. All WUIPs are stored in a library and can be retrieved within a workflow editor that links each workflow pattern to its corresponding WUIP, thus giving rise to a user interface for each workflow pattern.

  15. Easy-to-use interface

    Energy Technology Data Exchange (ETDEWEB)

    Blattner, M M; Blattner, D O; Tong, Y

    1999-04-01

    Easy-to-use interfaces are a class of interfaces that fall between public access interfaces and graphical user interfaces in usability and cognitive difficulty. We describe characteristics of easy-to-use interfaces by the properties of four dimensions: selection, navigation, direct manipulation, and contextual metaphors. Another constraint we introduced was to include as little text as possible, and what text we have will be in at least four languages. Formative evaluations were conducted to identify and isolate these characteristics. Our application is a visual interface for a home automation system intended for a diverse set of users. The design will be expanded to accommodate the visually disabled in the near future.

  16. PREFACE: Water at interfaces Water at interfaces

    Science.gov (United States)

    Gallo, P.; Rovere, M.

    2010-07-01

    This special issue is devoted to illustrating important aspects and significant results in the field of modeling and simulation of water at interfaces with solutes or with confining substrates, focusing on a range of temperatures from ambient to supercooled. Understanding the behavior of water, in contact with different substrates and/or in solutions, is of pivotal importance for a wide range of applications in physics, chemistry and biochemistry. Simulations of confined and/or interfacial water are also relevant for testing how different its behavior is with respect to bulk water. Simulations and modeling in this field are of particular importance when studying supercooled regions where water shows anomalous properties. These considerations motivated the organization of a workshop at CECAM in the summer of 2009 which aimed to bring together scientists working with computer simulations on the properties of water in various environments with different methodologies. In this special issue, we collected a variety of interesting contributions from some of the speakers of the workshop. We have roughly classified the contributions into four groups. The papers of the first group address the properties of interfacial and confined water upon supercooling in an effort to understand the relation with anomalous behavior of supercooled bulk water. The second group deals with the specific problem of solvation. The next group deals with water in different environments by considering problems of great importance in technological and biological applications. Finally, the last group deals with quantum mechanical calculations related to the role of water in chemical processes. The first group of papers is introduced by the general paper of Stanley et al. The authors discuss recent progress in understanding the anomalies of water in bulk, nanoconfined, and biological environments. They present evidence that liquid water may display 'polymorphism', a property that can be present in

  17. Embodiment and Interface

    DEFF Research Database (Denmark)

    Gregersen, Andreas Lindegaard; Grodal, Torben Kragh

    2008-01-01

    in motor isomorphism when comparing the media-supported embodied actions with unmediated actions, e.g. that discrepancy between player motor actions and visual representation may hamper ownership. It also argues that the present interfaces tend to be more supportive of the player’s active agency than...... as other game system configurations. The article argues that playing video games may provide experiences of extended embodiment where players may experience ownership of both actions and virtual bodies related to the represented game world. The article shows how ownership may be related to differences...... of the player as patient, i.e. being the object of another agent’s actions.  Keywords: Video games, embodiment, interface, agency, action, control, cognition  ...

  18. Popeye Project: ROV interfaces

    Energy Technology Data Exchange (ETDEWEB)

    Scates, C.R. [Shell Oil Inc., New Orleans, LA (United States); Hickok, D.D. [Dvaerner FSSL Inc., Houston, TX (United States); Hernandez, D.A.

    1997-04-01

    The Popeye Project in the Gulf of Mexico helped advance the technology and standardization of ROV interfaces for deepwater subsea production systems. Some of the many successful ROV operations during installation and completion were {open_quotes}first-of-it`s-kind{close_quotes} activities-enabled by many technical advances. The use and reliance upon ROV systems for support of deepwater drilling and installation operations significantly increased in the past 10 years. Shell Offshore Inc.`s (SOI) confidence in this increased capability was an important factor in many of the design decisions which characterized the innovative system. Technology advancements, which depended on effective ROV intervention, were implemented with no significant difficulties. These advancements, in particular the flying leads and seabed position methods, are available to the industry for other deepwater subsea systems. In addition, several Popeye ROV interfaces have helped advance the subsea standardization initiative; e.g., hot stabs, torque-tool end effectors, and paint color.

  19. An Approach to Interface Synthesis

    DEFF Research Database (Denmark)

    Madsen, Jan; Hald, Bjarne

    1995-01-01

    may contain the re-use of existing modules). The interface synthesis approach describes the basic transformations needed to transform the server interface description into an interface description on the client side of the communication medium. The synthesis approach is illustrated through a point......Presents a novel interface synthesis approach based on a one-sided interface description. Whereas most other approaches consider interface synthesis as optimizing a channel to existing client/server modules, we consider the interface synthesis as part of the client/server module synthesis (which......-to-point communication, but is applicable to synthesis of a multiple client/server environment. The interface description is based on a formalization of communication events....

  20. SNE Industrial Fieldbus Interface

    Science.gov (United States)

    Lucena, Angel; Raines, Matthew; Oostdyk, Rebecca; Mata, Carlos

    2011-01-01

    Programmable logic controllers (PLCs) have very limited diagnostic and no prognostic capabilities, while current smart sensor designs do not have the capability to communicate over Fieldbus networks. The aim is to interface smart sensors with PLCs so that health and status information, such as failure mode identification and measurement tolerance, can be communicated via an industrial Fieldbus such as ControlNet. The SNE Industrial Fieldbus Interface (SIFI) is an embedded device that acts as a communication module in a networked smart sensor. The purpose is to enable a smart sensor to communicate health and status information to other devices, such as PLCs, via an industrial Fieldbus networking protocol. The SNE (Smart Network Element) is attached to a commercial off-the-shelf Any bus-S interface module through the SIFI. Numerous Anybus-S modules are available, each one designed to interface with a specific Fieldbus. Development of the SIFI focused on communications using the ControlNet protocol, but any of the Anybus-S modules can be used. The SIFI communicates with the Any-bus module via a data buffer and mailbox system on the Anybus module, and supplies power to the module. The Anybus module transmits and receives data on the Fieldbus using the proper protocol. The SIFI is intended to be connected to other existing SNE modules in order to monitor the health and status of a transducer. The SIFI can also monitor aspects of its own health using an onboard watchdog timer and voltage monitors. The SIFI also has the hardware to drive a touchscreen LCD (liquid crystal display) unit for manual configuration and status monitoring.

  1. At the Knowledge Interface:

    DEFF Research Database (Denmark)

    Nielsen, Rikke Kristine; Buono, Anthony; Poulfelt, Flemming

    2017-01-01

    researchers. The paper addresses this challenge in terms of moving across this interface, developing the abilities and proficiency for co-creating research that meets the needs of academics and practitioners. The competency drivers behind strengthening research-practice impact are examined within the context......-produced research projects. Based on this analysis, the implications for research-oriented consulting and our interventions with a view to developing co-created academic- and practice-oriented impact are discussed...

  2. Microsystem Interfaces for Space

    OpenAIRE

    2006-01-01

    Microsystem interfaces to the macroscopic surroundings and within the microsystems themselves are formidable challenges that this thesis makes an effort to overcome, specifically for enabling a spacecraft based entirely on microsystems. The NanoSpace-1 nanospacecraft is a full-fledged satellite design with mass below 10 kg. The high performance with respect to mass is enabled by a massive implementation of microsystem technology – the entire spacecraft structure is built from square silicon p...

  3. Noise at the Interface

    DEFF Research Database (Denmark)

    Prior, Andrew

    2011-01-01

    The notion of noise occupies a contested territory, in which it is framed as pollution and detritus even as it makes its opposite a possibility - noise is always defined in opposition to something else, even if this ‘other’ is not quite clear. This paper explores noise in the context of ‘the inte...... interface’ asking what its affordances as an idea may contribute to our understanding of interface. I draw historically on information theory in particular to initiate this exploration....

  4. Standard interface file handbook

    Energy Technology Data Exchange (ETDEWEB)

    Shapiro, A.; Huria, H.C. (Cincinnati Univ., OH (United States))

    1992-10-01

    This handbook documents many of the standard interface file formats that have been adopted by the US Department of Energy to facilitate communications between and portability of, various large reactor physics and radiation transport software packages. The emphasis is on those files needed for use of the VENTURE/PC diffusion-depletion code system. File structures, contents and some practical advice on use of the various files are provided.

  5. Virtual button interface

    Science.gov (United States)

    Jones, Jake S.

    1999-01-01

    An apparatus and method of issuing commands to a computer by a user interfacing with a virtual reality environment. To issue a command, the user directs gaze at a virtual button within the virtual reality environment, causing a perceptible change in the virtual button, which then sends a command corresponding to the virtual button to the computer, optionally after a confirming action is performed by the user, such as depressing a thumb switch.

  6. Electrokinetics of heterogeneous interfaces.

    Science.gov (United States)

    Zembala, Maria

    2004-12-31

    The influence of surface heterogeneity of various types on electrokinetic parameters is reviewed. The scope of the paper covers classical electrokinetic phenomena characterized by linear dependence of electrokinetic parameters vs. related driving forces. Neither non-linear effects nor the effects of non-equilibrium electric double layer are considered. A historical description of hydrodynamic aspect of electrokinetic phenomena exploiting the slip plane idea is briefly outlined. Attempts to estimate the slip plane location by comparing the diffuse layer and zeta potential values for some model systems are presented. The surface heterogeneity was divided into three categories. Heterogeneity of the first type was related to geometrical morphology of an interfacial region characterized by a considerable surface development producing a three-dimensional interfacial region. The effects of solid roughness, hairy surface, dense polymer layers and gel-like layers are discussed here. The very high surface conductivity detected for such interfaces seems to be a good indicator of the presence of structured layers of this type. Heterogeneous interfaces of the second class cover systems exhibiting non-uniform distribution of surface charge. The non-uniform surface charge distribution can be either of a molecular (discrete charges) or of a microscale (two-dimensional micropatches or three-dimensional structures formed by polyelectrolyte multilayers). The last class of systems examined includes interfaces composed of charged substrate covered by charged bulky objects (particles). In comparison to the homogeneous surfaces, adsorbed charged particles modify both hydrodynamic flow and the electrostatic field significantly altering the electrokinetic parameters. The new description of electrokinetics of composed interfaces presented here takes into account both hydrodynamic and electric field modification and is free of the previously assumed slip plane shift caused by adsorbed

  7. PINE -- Electronic mail interface

    Science.gov (United States)

    Mellor, G. R.

    The PINE mail interface is a user-friendly mail utility for Unix systems. It has been adopted by Starlink as the recommended mail utility because of its ease of use compared with the mail utilities supplied as standard with the Unix operating system. PINE is intended to be intuitive and "to be learned by exploration rather than reading manuals". Here however are a few brief notes to get you started.

  8. SOFC interface studies

    DEFF Research Database (Denmark)

    Jacobsen, Torben; Bay, Lasse; West, Keld

    As previously shown the morphology of the cathode-YSZ electrolyte interface changes from a smooth surface to a roughened structure during the passage of current (\\ref{Lasse97}, \\ref{Karin01). These structural changes are probably responsible for the current induced improvement of the electrode...... in this and the corresponding anode interface investigated in more detail in part I (\\ref{Tine}) of this work. Although extrapolation to $1000^\\circ$C of the cation mobility in YSZ yields values in the order of $\\mathrm{cm^2s^{-1}}$, i.e.\\ by far to low to account for any transfer of YSZ material, the fact that these changes...... are observed points to a significant contribution from surface and grain boundary transport. The consequence of a significant tranport number for cations is a transfer of YSZ material from the anode-YSZ interface to that of the cathode. This is supported by the observation of a porous YSZ structure below...

  9. The THOSE remote interface

    Science.gov (United States)

    Klawon, Kevin; Gold, Josh; Bachman, Kristen

    2013-05-01

    The DIA, in conjunction with the Army Research Lab (ARL), wants to create an Unmanned Ground Sensor (UGS) controller that is (a) interoperable across all controller platforms, (b) capable of easily adding new sensors, radios, and processes and (c) backward compatible with existing UGS systems. To achieve this, a Terra Harvest controller was created that used Java JRE 1.6 and an Open Services Gateway initiative (OSGi) platform, named Terra Harvest Open Software Environment (THOSE). OSGi is an extensible framework that provides a modularized environment for deploying functionality in "bundles". These bundles can publish, discover, and share services available from other external bundles or bundles provided by the controller core. With the addition of a web GUI used for interacting with THOSE, a natural step was then to create a common remote interface that allows 3rd party real-time interaction with the controller. This paper provides an overview of the THOSE system and its components as well as a description of the architectural structure of the remote interface, highlighting the interactions occurring between the controller and the remote interface and its role in providing a positive user experience for managing UGSS functions.

  10. Assessing Electromyographic Interfaces

    Directory of Open Access Journals (Sweden)

    Joaquim Armando Pires Jorge

    2009-01-01

    Full Text Available Electronic apppliances are increasingly a part of our everyday lives. In particular, mobile devices, with their reduced dimensions with power rivaling desktop computers, have substantially augmented our communication abilities offering instant availability, anywhere, to everyone. These devices have become essential for human communication but also include a more comprehensive tool set to support productivity and leisure applications.However, the many applications commonly available are not adapted to people with special needs. Rather, most popular devices are targeted at teenagers or young adults with excellent eyesight and coordination. What is worse, most of the commonly used assistive control interfaces are not available in a mobile environment where user's position, accommodation and capacities can vary even widely.To try and address people with special needs new approaches and techniques are sorely needed. This paper presents a control interface to allow tetraplegic users to interact with electronic devices. Our method uses myographic information (Electromyography or EMG collected from residually controlled body areas. User evaluations validate electromyography as a daily wearable interface. In particular our results show that EMG can be used even in mobility contexts.

  11. Vibrational spectroscopy at electrified interfaces

    CERN Document Server

    Wieckowski, Andrzej; Braunschweig, Björn

    2013-01-01

    Reviews the latest theory, techniques, and applications Surface vibrational spectroscopy techniques probe the structure and composition of interfaces at the molecular level. Their versatility, coupled with their non-destructive nature, enables in-situ measurements of operating devices and the monitoring of interface-controlled processes under reactive conditions. Vibrational Spectroscopy at Electrified Interfaces explores new and emerging applications of Raman, infrared, and non-linear optical spectroscopy for the study of charged interfaces. The book draws from hu

  12. Why Mineral Interfaces Matter

    Science.gov (United States)

    Putnis, Andrew; Putnis, Christine V.

    2015-04-01

    While it is obvious that reactions between a mineral and an aqueous solution take place at the mineral-fluid interface it is only relatively recently that high spatial resolution studies have demonstrated how the local structure of the mineral surface and the chemical composition of the fluid at the interface control both the short-range and the long-range consequences of mineral-fluid interaction. Long-range consequences of fluid-mineral interaction control element cycles in the earth, the formation of ore-deposits, the chemical composition of the oceans through weathering of rocks and hence climate changes. Although weathering is clearly related to mineral dissolution, to what extent do experimentally measured dissolution rates of minerals help to understand weathering, especially weathering mechanisms? This question is related to the short-range, local reactions that take place when a mineral, that is not stable in the fluid, begins to dissolve. In this case the fluid composition at the interface will become supersaturated with respect to a different phase or phases. This may be a different composition of the same mineral e.g. a Ca-rich feldspar dissolving in a Na-rich solution results in a fluid at the interface which may be supersaturated with respect to an Na-rich feldspar. Alternatively, the interfacial fluid could be supersaturated with respect to a different mineral e.g. an Na-rich zeolite, depending on the temperature. Numerous experiments have shown that the precipitation of a more stable phase at the mineral-fluid interface results in a coupling between the dissolution and the precipitation, and the replacement of one mineral by another. This process separates the short-range mechanisms which depend only on the composition of the interfacial solution, and the long-range consequences that depend on the composition of the residual fluid released from the reacting parent mineral. Typically such residual fluids may carry metal ions tens to hundreds of

  13. Single-interface Casimir torque

    Science.gov (United States)

    Morgado, Tiago A.; Silveirinha, Mário G.

    2016-10-01

    A different type of Casimir-type interaction is theoretically predicted: a single-interface torque at a junction of an anisotropic material and a vacuum or another material system. The torque acts to reorient the polarizable microscopic units of the involved materials near the interface, and thus to change the internal structure of the materials. The single-interface torque depends on the zero-point energy of the interface localized and extended modes. Our theory demonstrates that the single-interface torque is essential to understand the Casimir physics of material systems with anisotropic elements and may influence the orientation of the director of nematic liquid crystals.

  14. Conceptual Framework for Aquatic Interfaces

    Science.gov (United States)

    Lewandowski, J.; Krause, S.

    2015-12-01

    Aquatic interfaces are generally characterized by steep gradients of physical, chemical and biological properties due to the contrast between the two adjacent environments. Innovative measurement techniques are required to study the spatially heterogeneous and temporally variable processes. Especially the different spatial and temporal scales are a large challenge. Due to the steep biogeochemical gradients and the intensive structural and compositional heterogeneity, enhanced biogeochemical processing rates are inherent to aquatic interfaces. Nevertheless, the effective turnover depends strongly on the residence time distribution along the flow paths and in sections with particular biogeochemical milieus and reaction kinetics. Thus, identification and characterization of the highly complex flow patterns in and across aquatic interfaces are crucial to understand biogeochemical processing along exchange flow paths and to quantify transport across aquatic interfaces. Hydrodynamic and biogeochemical processes are closely coupled at aquatic interfaces. However, interface processing rates are not only enhanced compared to the adjacent compartments that they connect; also completely different reactions might occur if certain thresholds are exceeded or the biogeochemical milieu differs significantly from the adjacent environments. Single events, temporal variability and spatial heterogeneity might increase overall processing rates of aquatic interfaces and thus, should not be neglected when studying aquatic interfaces. Aquatic interfaces are key zones relevant for the ecological state of the entire ecosystem and thus, understanding interface functioning and controls is paramount for ecosystem management. The overall aim of this contribution is a general conceptual framework for aquatic interfaces that is applicable to a wide range of systems, scales and processes.

  15. Transport processes at fluidic interfaces

    CERN Document Server

    Reusken, Arnold

    2017-01-01

    There are several physico-chemical processes that determine the behavior of multiphase fluid systems – e.g., the fluid dynamics in the different phases and the dynamics of the interface(s), mass transport between the fluids, adsorption effects at the interface, and transport of surfactants on the interface – and result in heterogeneous interface properties. In general, these processes are strongly coupled and local properties of the interface play a crucial role. A thorough understanding of the behavior of such complex flow problems must be based on physically sound mathematical models, which especially account for the local processes at the interface. This book presents recent findings on the rigorous derivation and mathematical analysis of such models and on the development of numerical methods for direct numerical simulations. Validation results are based on specifically designed experiments using high-resolution experimental techniques. A special feature of this book is its focus on an interdisciplina...

  16. Matched Interface and Boundary Method for Elasticity Interface Problems

    Science.gov (United States)

    Wang, Bao; Xia, Kelin; Wei, Guo-Wei

    2015-01-01

    Elasticity theory is an important component of continuum mechanics and has had widely spread applications in science and engineering. Material interfaces are ubiquity in nature and man-made devices, and often give rise to discontinuous coefficients in the governing elasticity equations. In this work, the matched interface and boundary (MIB) method is developed to address elasticity interface problems. Linear elasticity theory for both isotropic homogeneous and inhomogeneous media is employed. In our approach, Lamé’s parameters can have jumps across the interface and are allowed to be position dependent in modeling isotropic inhomogeneous material. Both strong discontinuity, i.e., discontinuous solution, and weak discontinuity, namely, discontinuous derivatives of the solution, are considered in the present study. In the proposed method, fictitious values are utilized so that the standard central finite different schemes can be employed regardless of the interface. Interface jump conditions are enforced on the interface, which in turn, accurately determines fictitious values. We design new MIB schemes to account for complex interface geometries. In particular, the cross derivatives in the elasticity equations are difficult to handle for complex interface geometries. We propose secondary fictitious values and construct geometry based interpolation schemes to overcome this difficulty. Numerous analytical examples are used to validate the accuracy, convergence and robustness of the present MIB method for elasticity interface problems with both small and large curvatures, strong and weak discontinuities, and constant and variable coefficients. Numerical tests indicate second order accuracy in both L∞ and L2 norms. PMID:25914439

  17. Bubble and drop interfaces

    CERN Document Server

    Miller

    2011-01-01

    The book aims at describing the most important experimental methods for characterizing liquid interfaces, such as drop profile analysis, bubble pressure and drop volume tensiometry, capillary pressure technique, and oscillating drops and bubbles. Besides the details of experimental set ups, also the underlying theoretical basis is presented in detail. In addition, a number of applications based on drops and bubbles is discussed, such as rising bubbles and the very complex process of flotation. Also wetting, characterized by the dynamics of advancing contact angles is discussed critically. Spec

  18. Brain-computer interface

    DEFF Research Database (Denmark)

    2014-01-01

    A computer-implemented method of providing an interface between a user and a processing unit, the method comprising : presenting one or more stimuli to a user, each stimulus varying at a respective stimulation frequency, each stimulation frequency being associated with a respective user......-selectable input; receiving at least one signal indicative of brain activity of the user; and determining, from the received signal, which of the one or more stimuli the user attends to and selecting the user-selectable input associated with the stimulation frequency of the determined stimuli as being a user...

  19. Interfacing with the Night

    OpenAIRE

    McLean, Alex; Parkinson, Adam

    2014-01-01

    In  this  paper,  the  authors  consider  the  interfaces  between academia and dance music. Dance music and club culture are, we argue, important to computer music and the live performance of electronic music, but there are many different difficulties encountered when trying to present electronic dance music within academic contexts. The authors draw upon their experiences as promoters, performers, researchers and audience members to discuss these difficulties and how and why we might negoti...

  20. MAN – MACHINE INTERFACE

    Directory of Open Access Journals (Sweden)

    S.Bhuvaneswari

    2012-02-01

    Full Text Available Agents trained by learning techniques provide a powerful approximation of state spaces in games that aretoo large for naive approaches. In the study Genetic Algorithms and Manual Interface was implementedand used to train agents for the board game LUDO. The state space of LUDO is generalized to a small setand encoded to suit the different techniques. The impact of variables and tactics applied in training aredetermined. Agents based on the techniques performed satisfactory against a baseline finite agent, and aGenetic Algorithm based agent performed satisfactory against competitors from the course. Better statespace representations will improve the success of learning based agents.

  1. Engineering graded tissue interfaces.

    Science.gov (United States)

    Phillips, Jennifer E; Burns, Kellie L; Le Doux, Joseph M; Guldberg, Robert E; García, Andrés J

    2008-08-26

    Interfacial zones between tissues provide specialized, transitional junctions central to normal tissue function. Regenerative medicine strategies focused on multiple cell types and/or bi/tri-layered scaffolds do not provide continuously graded interfaces, severely limiting the integration and biological performance of engineered tissue substitutes. Inspired by the bone-soft tissue interface, we describe a biomaterial-mediated gene transfer strategy for spatially regulated genetic modification and differentiation of primary dermal fibroblasts within tissue-engineered constructs. We demonstrate that zonal organization of osteoblastic and fibroblastic cellular phenotypes can be engineered by a simple, one-step seeding of fibroblasts onto scaffolds containing a spatial distribution of retrovirus encoding the osteogenic transcription factor Runx2/Cbfa1. Gradients of immobilized retrovirus, achieved via deposition of controlled poly(L-lysine) densities, resulted in spatial patterns of transcription factor expression, osteoblastic differentiation, and mineralized matrix deposition. Notably, this graded distribution of mineral deposition and mechanical properties was maintained when implanted in vivo in an ectopic site. Development of this facile and robust strategy is significant toward the regeneration of continuous interfacial zones that mimic the cellular and microstructural characteristics of native tissue.

  2. Mercury Shopping Cart Interface

    Science.gov (United States)

    Pfister, Robin; McMahon, Joe

    2006-01-01

    Mercury Shopping Cart Interface (MSCI) is a reusable component of the Power User Interface 5.0 (PUI) program described in another article. MSCI is a means of encapsulating the logic and information needed to describe an orderable item consistent with Mercury Shopping Cart service protocol. Designed to be used with Web-browser software, MSCI generates Hypertext Markup Language (HTML) pages on which ordering information can be entered. MSCI comprises two types of Practical Extraction and Report Language (PERL) modules: template modules and shopping-cart logic modules. Template modules generate HTML pages for entering the required ordering details and enable submission of the order via a Hypertext Transfer Protocol (HTTP) post. Shopping cart modules encapsulate the logic and data needed to describe an individual orderable item to the Mercury Shopping Cart service. These modules evaluate information entered by the user to determine whether it is sufficient for the Shopping Cart service to process the order. Once an order has been passed from MSCI to a deployed Mercury Shopping Cart server, there is no further interaction with the user.

  3. Laparoscopic simulation interface

    Science.gov (United States)

    Rosenberg, Louis B.

    2006-04-04

    A method and apparatus for providing high bandwidth and low noise mechanical input and output for computer systems. A gimbal mechanism provides two revolute degrees of freedom to an object about two axes of rotation. A linear axis member is coupled to the gimbal mechanism at the intersection of the two axes of rotation. The linear axis member is capable of being translated along a third axis to provide a third degree of freedom. The user object is coupled to the linear axis member and is thus translatable along the third axis so that the object can be moved along all three degrees of freedom. Transducers associated with the provided degrees of freedom include sensors and actuators and provide an electromechanical interface between the object and a digital processing system. Capstan drive mechanisms transmit forces between the transducers and the object. The linear axis member can also be rotated about its lengthwise axis to provide a fourth degree of freedom, and, optionally, a floating gimbal mechanism is coupled to the linear axis member to provide fifth and sixth degrees of freedom to an object. Transducer sensors are associated with the fourth, fifth, and sixth degrees of freedom. The interface is well suited for simulations of medical procedures and simulations in which an object such as a stylus or a joystick is moved and manipulated by the user.

  4. Laparoscopic simulation interface

    Energy Technology Data Exchange (ETDEWEB)

    Rosenberg, Louis B.

    2006-04-04

    A method and apparatus for providing high bandwidth and low noise mechanical input and output for computer systems. A gimbal mechanism provides two revolute degrees of freedom to an object about two axes of rotation. A linear axis member is coupled to the gimbal mechanism at the intersection of the two axes of rotation. The linear axis member is capable of being translated along a third axis to provide a third degree of freedom. The user object is coupled to the linear axis member and is thus translatable along the third axis so that the object can be moved along all three degrees of freedom. Transducers associated with the provided degrees of freedom include sensors and actuators and provide an electromechanical interface between the object and a digital processing system. Capstan drive mechanisms transmit forces between the transducers and the object. The linear axis member can also be rotated about its lengthwise axis to provide a fourth degree of freedom, and, optionally, a floating gimbal mechanism is coupled to the linear axis member to provide fifth and sixth degrees of freedom to an object. Transducer sensors are associated with the fourth, fifth, and sixth degrees of freedom. The interface is well suited for simulations of medical procedures and simulations in which an object such as a stylus or a joystick is moved and manipulated by the user.

  5. Flexible DCP interface. [environmental sensor and signal conditioning interface

    Science.gov (United States)

    Kanemasu, E. T.; Schimmelpfenning, H.

    1974-01-01

    The author has identified the following significant results. A user of an ERTS data collection system (DCS) must supply the sensors and signal-conditioning interface. The electronic interface must be compatible with the NASA-furnished data collection platform. A universal signal-conditioning system for use with a wide range of environmental sensors is described. The interface is environmentally and electronically compatible with the DCP and has operated satisfactorily for a complete winter wheat growing season in Kansas.

  6. Proceedings Foundations for Interface Technologies

    CERN Document Server

    Legay, Axel; 10.4204/EPTCS.46

    2011-01-01

    FIT stands for Foundations of Interface Technologies. Component-based design is widely considered as a major approach to developing systems in a time and cost effective way. Central in this approach is the notion of an interface. Interfaces summarize the externally visible properties of a component and are seen as a key to achieving component interoperability and to predict global system behavior based on the component behavior. To capture the intricacy of complex software products, rich interfaces have been proposed. These interfaces do not only specify syntactic properties, such as the signatures of methods and operations, but also take into account behavioral and extra-functional properties, such as quality of service, security and dependability. Rich interfaces have been proposed for describing, e.g., the legal sequences of messages or method calls accepted by components, or the resource and timing constraints in embedded software. The development of a rigorous framework for the specification and analysis...

  7. Intelligent interface design and evaluation

    Science.gov (United States)

    Greitzer, Frank L.

    1988-01-01

    Intelligent interface concepts and systematic approaches to assessing their functionality are discussed. Four general features of intelligent interfaces are described: interaction efficiency, subtask automation, context sensitivity, and use of an appropriate design metaphor. Three evaluation methods are discussed: Functional Analysis, Part-Task Evaluation, and Operational Testing. Design and evaluation concepts are illustrated with examples from a prototype expert system interface for environmental control and life support systems for manned space platforms.

  8. A note on charged interfaces

    Energy Technology Data Exchange (ETDEWEB)

    Luo Huaqiang [Courant Institute of Mathematical Sciences, New York University, New York, NY 10012 (United States); Yu, M Y [Institute for Theoretical Physics I, Ruhr-University, D-44780 Bochum (Germany)

    2006-12-15

    A condition associated with the plasma boundary or other charged interface is reviewed. It is pointed out that in comparing theories and simulations of such interfaces, in order to avoid conflicting results it should be ascertained that the systems under consideration are thermodynamically equivalent. For the plasma-wall interface in equilibrium, the rate of change of the surface-charge density with respect to the surface potential must be positive.

  9. Porphyrins at interfaces

    Science.gov (United States)

    Auwärter, Willi; Écija, David; Klappenberger, Florian; Barth, Johannes V.

    2015-02-01

    Porphyrins and other tetrapyrrole macrocycles possess an impressive variety of functional properties that have been exploited in natural and artificial systems. Different metal centres incorporated within the tetradentate ligand are key for achieving and regulating vital processes, including reversible axial ligation of adducts, electron transfer, light-harvesting and catalytic transformations. Tailored substituents optimize their performance, dictating their arrangement in specific environments and mediating the assembly of molecular nanoarchitectures. Here we review the current understanding of these species at well-defined interfaces, disclosing exquisite insights into their structural and chemical properties, and also discussing methods by which to manipulate their intramolecular and organizational features. The distinct characteristics arising from the interfacial confinement offer intriguing prospects for molecular science and advanced materials. We assess the role of surface interactions with respect to electronic and physicochemical characteristics, and describe in situ metallation pathways, molecular magnetism, rotation and switching. The engineering of nanostructures, organized layers, interfacial hybrid and bio-inspired systems is also addressed.

  10. Interface-assisted molecular spintronics

    Energy Technology Data Exchange (ETDEWEB)

    Raman, Karthik V. [Solid State and Structural Chemistry Unit, Indian Institute of Science, Bangalore 560012 (India)

    2014-09-15

    Molecular spintronics, a field that utilizes the spin state of organic molecules to develop magneto-electronic devices, has shown an enormous scientific activity for more than a decade. But, in the last couple of years, new insights in understanding the fundamental phenomena of molecular interaction on magnetic surfaces, forming a hybrid interface, are presenting a new pathway for developing the subfield of interface-assisted molecular spintronics. The recent exploration of such hybrid interfaces involving carbon based aromatic molecules shows a significant excitement and promise over the previously studied single molecular magnets. In the above new scenario, hybridization of the molecular orbitals with the spin-polarized bands of the surface creates new interface states with unique electronic and magnetic character. This study opens up a molecular-genome initiative in designing new handles to functionalize the spin dependent electronic properties of the hybrid interface to construct spin-functional tailor-made devices. Through this article, we review this subject by presenting a fundamental understanding of the interface spin-chemistry and spin-physics by taking support of advanced computational and spectroscopy tools to investigate molecular spin responses with demonstration of new interface phenomena. Spin-polarized scanning tunneling spectroscopy is favorably considered to be an important tool to investigate these hybrid interfaces with intra-molecular spatial resolution. Finally, by addressing some of the recent findings, we propose novel device schemes towards building interface tailored molecular spintronic devices for applications in sensor, memory, and quantum computing.

  11. Capillary flows with forming interfaces

    CERN Document Server

    Shikhmurzaev, Yulii D

    2007-01-01

    PREFACEINTRODUCTION Free-surface flows in nature and industryScope of the bookFUNDAMENTALS OF FLUID MECHANICS Main concepts Governing equations Elements of thermodynamics Classical boundary conditions Physically meaningful solutions and paradoxes of modelingMOVING CONTACT LINES: AN OVERVIEW Essence of the problem Experimental observations Molecular dynamics simulations Review of theoriesThe key to the moving contact-line problemBOUNDARY CONDITIONS ON FORMING INTERFACES Modeling of interfacesConservation lawsLiquid-gas and liquid-solid interfacesLiquid-liquid interfaces SummaryOpen questions an

  12. Report on the FY 1999 R and D survey on ultra-high sensitive photoelectric converter; 1999 nendo chokokando koden henkan soshi ni kansuru kenkyu kaihatsu chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    By the ICB method which is one of the ion engineering methods, photomultipliers were formed using organic dye thin films. By changing the energy to bond traps on thin film/metal electrode interface and electric charges by change of acceleration energy of ion beams, a technology was developed for adjusting the optimum operating temperature between -20 degrees C and +100 degrees C. The wide range of operating temperature and favorable SN ratio can be realized. It was made clear that the dark current of the photomultiplier is composed of two components of contribution by the residual charge stored on the interface at photomultiplying and of contribution by charge injection from the Schottky barrier. Based on this, the residual electric charge removal method by heating and applied pulse voltage was developed. The development for practical use was studied of ultra-high sensitive photoelectric converters. As an intelligent photo sensor, a biomimetic visual photosensor was proposed which uses amplification/memory/arithmetic functions and film formation/processability of organic thin films. The paper also described the image sensor. (NEDO)

  13. Playful user interfaces: interfaces that invite social and physical interaction

    NARCIS (Netherlands)

    Nijholt, Anton

    2014-01-01

    This book is about user interfaces to applications that can be considered as ‘playful’. The interfaces to such applications should be ‘playful’ as well. The application should be fun, and interacting with such an application should, of course, be fun as well. Maybe more. Why not expect that the inte

  14. Modeling soft interface dominated systems

    NARCIS (Netherlands)

    Lamorgese, A.; Mauri, R.; Sagis, L.M.C.

    2017-01-01

    The two main continuum frameworks used for modeling the dynamics of soft multiphase systems are the Gibbs dividing surface model, and the diffuse interface model. In the former the interface is modeled as a two dimensional surface, and excess properties such as a surface density, or surface energy

  15. Playful Interfaces: Introduction and History

    NARCIS (Netherlands)

    Nijholt, Anton; Nijholt, Anton

    2014-01-01

    In this short survey we have some historical notes about human-computer interface development with an emphasis on interface technology that has allowed us to design playful interactions with applications. The applications do not necessarily have to be entertainment applications. We can have playful

  16. GRAPHIC INTERFACES FOR ENGINEERING APPLICATIONS

    Directory of Open Access Journals (Sweden)

    Ion PANA,

    2012-05-01

    Full Text Available Using effective the method of calculating Fitness for Service requires the achievement of graphical interfaces. This paper presents an example of such interfaces, made with Visual Basic program and used in the evaluation of pipelines in a research contract [4

  17. Leading research in fiscal 1996. Research study on advanced measurement/analysis technology; 1996 nendo sendo kenkyu. Kodo keisoku bunseki gijutsu ni kansuru chosa kenkyu

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    For development of production technologies suitable for environment, safety and advanced information-oriented society by improving the flexibility of production lines, some new measurement technologies were researched. Problem solution was attempted by combining the in-situ multi-dimensional measurement technology capable of easily obtaining various 3-D information with the non-contact photon measurement technology superior in operability and sensitivity under any environment conditions. This solution requires a compact radiation source with higher brightness and wider spectral range, and a high-sensitive detector. The technology concentrating photon onto minute regions, high-efficiency transmission, and control technology of photon wave front are also necessary. Development and international standardization of a common interface is unavoidable. In addition, its network is essential for advanced use of multimedia,. In the future, the comfortable life surrounded by advanced products and multimedia, comfortable social environment, safety and resource saving will be achieved by this technology. 94 refs., 75 figs., 15 tabs.

  18. Interface Input/Output Automata

    DEFF Research Database (Denmark)

    Larsen, Kim Guldstrand; Nyman, Ulrik; Wasowski, Andrzej

    2006-01-01

    Building on the theory of interface automata by de Alfaro and Henzinger we design an interface language for Lynch’s I/O, a popular formalism used in the development of distributed asynchronous systems, not addressed by previous interface research. We introduce an explicit separation of assumptions...... from guarantees not yet seen in other behavioral interface theories. Moreover we derive the composition operator systematically and formally, guaranteeing that the resulting compositions are always the weakest in the sense of assumptions, and the strongest in the sense of guarantees. We also present...... a method for solving systems of relativized behavioral inequalities as used in our setup and draw a formal correspondence between our work and interface automata....

  19. Power User Interface

    Science.gov (United States)

    Pfister, Robin; McMahon, Joe

    2006-01-01

    Power User Interface 5.0 (PUI) is a system of middleware, written for expert users in the Earth-science community, PUI enables expedited ordering of data granules on the basis of specific granule-identifying information that the users already know or can assemble. PUI also enables expert users to perform quick searches for orderablegranule information for use in preparing orders. PUI 5.0 is available in two versions (note: PUI 6.0 has command-line mode only): a Web-based application program and a UNIX command-line- mode client program. Both versions include modules that perform data-granule-ordering functions in conjunction with external systems. The Web-based version works with Earth Observing System Clearing House (ECHO) metadata catalog and order-entry services and with an open-source order-service broker server component, called the Mercury Shopping Cart, that is provided separately by Oak Ridge National Laboratory through the Department of Energy. The command-line version works with the ECHO metadata and order-entry process service. Both versions of PUI ultimately use ECHO to process an order to be sent to a data provider. Ordered data are provided through means outside the PUI software system.

  20. Next Generation Search Interfaces

    Science.gov (United States)

    Roby, W.; Wu, X.; Ly, L.; Goldina, T.

    2015-09-01

    Astronomers are constantly looking for easier ways to access multiple data sets. While much effort is spent on VO, little thought is given to the types of User Interfaces we need to effectively search this sort of data. For instance, an astronomer might need to search Spitzer, WISE, and 2MASS catalogs and images then see the results presented together in one UI. Moving seamlessly between data sets is key to presenting integrated results. Results need to be viewed using first class, web based, integrated FITS viewers, XY Plots, and advanced table display tools. These components should be able to handle very large datasets. To make a powerful Web based UI that can manage and present multiple searches to the user requires taking advantage of many HTML5 features. AJAX is used to start searches and present results. Push notifications (Server Sent Events) monitor background jobs. Canvas is required for advanced result displays. Lesser known CSS3 technologies makes it all flow seamlessly together. At IPAC, we have been developing our Firefly toolkit for several years. We are now using it to solve this multiple data set, multiple queries, and integrated presentation problem to create a powerful research experience. Firefly was created in IRSA, the NASA/IPAC Infrared Science Archive (http://irsa.ipac.caltech.edu). Firefly is the core for applications serving many project archives, including Spitzer, Planck, WISE, PTF, LSST and others. It is also used in IRSA's new Finder Chart and catalog and image displays.

  1. ATLAS Detector Interface Group

    CERN Multimedia

    Mapelli, L

    Originally organised as a sub-system in the DAQ/EF-1 Prototype Project, the Detector Interface Group (DIG) was an information exchange channel between the Detector systems and the Data Acquisition to provide critical detector information for prototype design and detector integration. After the reorganisation of the Trigger/DAQ Project and of Technical Coordination, the necessity to provide an adequate context for integration of detectors with the Trigger and DAQ lead to organisation of the DIG as one of the activities of Technical Coordination. Such an organisation emphasises the ATLAS wide coordination of the Trigger and DAQ exploitation aspects, which go beyond the domain of the Trigger/DAQ project itself. As part of Technical Coordination, the DIG provides the natural environment for the common work of Trigger/DAQ and detector experts. A DIG forum for a wide discussion of all the detector and Trigger/DAQ integration issues. A more restricted DIG group for the practical organisation and implementation o...

  2. Interface roughening and pinning

    Science.gov (United States)

    Roux, Stéphane; Hansen, Alex

    1994-04-01

    We study a simple model for thé pinning of an interface by impurities with random strengths, and thé depinning due to thé applied pressure, in a quasi-static propagation lirait. The model is very close to thé so called "Robin Hood" model introduced by Zaitsev. It is designed to describe e.g. thé invasion of a wetting fluid (imbibition) in a heterogeneous porous medium containing a second immiscible fluid. The relation between this model and other previously proposed approaches is discussed. The front of thé invaded domain is shown to develop a self-affine structure with an increase of thé roughness as a power-law of thé injected volume. The value of thé apparent roughness exponent can be favorably compared to some experimental measurements although we argue that thé true roughness exponent is out of reach of commonly used methods. We show that thé distribution f(d, Δ t) of distances d between discrete local invasions at a time interval Δ t can be described by a scaling law f(d, Δ t) = d^{-1}\\varphi(d/sqrt{Δ t}). This form can be obtained from thé identification of a hierarchical structure of "bursts" in thé pressure signal. Those "bursts" are quahtatively similar to those observed in quasistatic drainage, (i.e. invasion percolation), although characterized by différent scaling indices. Nous étudions un modèle simple pour analyser l'accrochage d'une interface sur des impuretés et le décrochage sous l'effet d'une pression appliquée, dans une limite quasi-statique. Ce modèle est très voisin du modèle "Robin Hood" introduit par Zaitsev. Il s'applique en particulier à l'invasion d'un fluide mouillant (imbibition) dans un milieu poreux hétérogène contenant un fluide immiscible. Nous discutons les relations entre ce modèle et d'autres approches proposées pour décrire ce phénomène. Le front d'invasion acquiert une structure auto-affine, avec un développement de la rugosité selon une loi de puissance du volume injecté. La valeur de l

  3. Nanoparticle Assemblies at Fluid Interfaces

    Energy Technology Data Exchange (ETDEWEB)

    Russell, Thomas P. [Univ. of Massachusetts, Amherst, MA (United States). Dept. of Polymer Science and Engineering

    2015-03-10

    A systematic study of the structure and dynamics of nanoparticles (NP) and NP-surfactants was performed. The ligands attached to both the NPs and NP-surfactants dictate the manner in which the nanoscopic materials assemble at fluid interfaces. Studies have shown that a single layer of the nanoscpic materials form at the interface to reduce the interactions between the two immiscible fluids. The shape of the NP is, also, important, where for spherical particles, a disordered, liquid-like monolayer forms, and, for nanorods, ordered domains at the interface is found and, if the monolayers are compressed, the orientation of the nanorods with respect to the interface can change. By associating end-functionalized polymers to the NPs assembled at the interface, NP-surfactants are formed that increase the energetic gain in segregating each NP at the interface which allows the NP-surfactants to jam at the interface when compressed. This has opened the possibility of structuring the two liquids by freezing in shape changes of the liquids.

  4. Playful user interfaces interfaces that invite social and physical interaction

    CERN Document Server

    2014-01-01

    The book is about user interfaces to applications that have been designed for social and physical interaction. The interfaces are ‘playful’, that is, users feel challenged to engage in social and physical interaction because that will be fun. The topics that will be present in this book are interactive playgrounds, urban games using mobiles, sensor-equipped environments for playing, child-computer interaction, tangible game interfaces, interactive tabletop technology and applications, full-body interaction, exertion games, persuasion, engagement, evaluation, and user experience. Readers of the book will not only get a survey of state-of-the-art research in these areas, but the chapters in this book will also provide a vision of the future where playful interfaces will be ubiquitous, that is, present and integrated in home, office, recreational, sports and urban environments, emphasizing that in the future in these environments game elements will be integrated and welcomed.

  5. Through the Interface - a human activity approach to user interfaces

    DEFF Research Database (Denmark)

    Bødker, Susanne

    In providing a theoretical framework for understanding human- computer interaction as well as design of user interfaces, this book combines elements of anthropology, psychology, cognitive science, software engineering, and computer science. The framework examines the everyday work practices...

  6. Superconducting interfaces between insulating oxides.

    Science.gov (United States)

    Reyren, N; Thiel, S; Caviglia, A D; Kourkoutis, L Fitting; Hammerl, G; Richter, C; Schneider, C W; Kopp, T; Rüetschi, A-S; Jaccard, D; Gabay, M; Muller, D A; Triscone, J-M; Mannhart, J

    2007-08-31

    At interfaces between complex oxides, electronic systems with unusual electronic properties can be generated. We report on superconductivity in the electron gas formed at the interface between two insulating dielectric perovskite oxides, LaAlO3 and SrTiO3. The behavior of the electron gas is that of a two-dimensional superconductor, confined to a thin sheet at the interface. The superconducting transition temperature of congruent with 200 millikelvin provides a strict upper limit to the thickness of the superconducting layer of congruent with 10 nanometers.

  7. Practical speech user interface design

    CERN Document Server

    Lewis, James R

    2010-01-01

    Although speech is the most natural form of communication between humans, most people find using speech to communicate with machines anything but natural. Drawing from psychology, human-computer interaction, linguistics, and communication theory, Practical Speech User Interface Design provides a comprehensive yet concise survey of practical speech user interface (SUI) design. It offers practice-based and research-based guidance on how to design effective, efficient, and pleasant speech applications that people can really use. Focusing on the design of speech user interfaces for IVR application

  8. The molecule-metal interface

    CERN Document Server

    Koch, Norbert; Wee, Andrew Thye Shen

    2013-01-01

    Reviewing recent progress in the fundamental understanding of the molecule-metal interface, this useful addition to the literature focuses on experimental studies and introduces the latest analytical techniques as applied to this interface.The first part covers basic theory and initial principle studies, while the second part introduces readers to photoemission, STM, and synchrotron techniques to examine the atomic structure of the interfaces. The third part presents photoelectron spectroscopy, high-resolution UV photoelectron spectroscopy and electron spin resonance to study the electroni

  9. Interface gateways: defining the solutions.

    Science.gov (United States)

    Johnson, R; Zobian, M

    1994-02-01

    In summary, an interface gateway is able to quickly create and support relationships. In the healthcare environment of the 1990s, organization executives will be faced with an exponential increase in the number of provider, payor and employer alliances, affiliations and acquisitions. One of the recurring requirements in this scenario is the need to share information. Most of the data standards in existence today do not address the vast interface requirements of these organizations. However, the capabilities, flexibility and capacity of interface gateways can allow these relationships to be created and supported in a fraction of the time that conventional methods require.

  10. Designing end-user interfaces

    CERN Document Server

    Heaton, N

    1988-01-01

    Designing End-User Interfaces: State of the Art Report focuses on the field of human/computer interaction (HCI) that reviews the design of end-user interfaces.This compilation is divided into two parts. Part I examines specific aspects of the problem in HCI that range from basic definitions of the problem, evaluation of how to look at the problem domain, and fundamental work aimed at introducing human factors into all aspects of the design cycle. Part II consists of six main topics-definition of the problem, psychological and social factors, principles of interface design, computer intelligenc

  11. Search-User Interface Design

    CERN Document Server

    Wilson, Max

    2011-01-01

    Search User Interfaces (SUIs) represent the gateway between people who have a task to complete, and the repositories of information and data stored around the world. Not surprisingly, therefore, there are many communities who have a vested interest in the way SUIs are designed. There are people who study how humans search for information, and people who study how humans use computers. There are people who study good user interface design, and people who design aesthetically pleasing user interfaces. There are also people who curate and manage valuable information resources, and people who desi

  12. Dispersive transport across interfaces

    Science.gov (United States)

    Berkowitz, Brian; Adler, Pierre

    2015-04-01

    Experiments demonstrating asymmetrical dispersive transport of a conservative tracer across interfaces between different porous materials have recently been performed. Here, this phenomenon is studied numerically on the pore scale. The flow field is derived by solving the Stokes equation. The dispersive transport is simulated by a large number of particles undergoing random walks under the simultaneous action of convection and diffusion. Two main two-dimensional configurations are studied; each consists of two segments (called coarse and fine) with the same structure, porosity, and length along the main flow, but different characteristic solid/pore sizes. One structure consists of two channels containing cavities of different sizes, and the second of square "grains" of different sizes. At time t=0, a large number of particles is injected (as a pulse) around a given cross-section. The corresponding breakthrough curves (BTCs) are registered as functions of time at six different cross sections. Calculations are made twice; in the first case (CtoF), particles are injected in the coarse side and are transported towards the fine one; in the second one (FtoC), the opposite case is studied. These calculations are performed for various Péclet numbers (Pe). Comparison of the resulting BTCs shows features that are similar to experimental observations, but with qualitative and quantitative differences. The influences of the medium, of the injection and observation planes, and of Pe are detailed and discussed. A BTC for pulse injection can be characterized by its maximum M(t_M) and the time tM at which it occurs. The observed differences for channels bounded by cavities are very small. However for the granular structures, M(t_M) is always larger for FtoC than for CtoF ; tM depends on all the parameters, namely Pe, the size ratio between the large and small grains, the injection and the observation planes. The numerical results are systematically compared with solutions of one

  13. Fiscal 1998 research report on International Clean Energy Network using Hydrogen Conversion (WE-NET). Subtask 2. Research on promotion of international cooperation (research on standardization of hydrogen energy technologies); 1998 nendo suiso riyo kokusai clean energy system gijutsu (WE-NET) sub task. 2. Kokusai kyoryoku suishin no tame no chosa kento (suiso energy gijutsu hyojunka ni kansuru chosa kento)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-03-01

    This report summarizes the fiscal 1998 research result on the basic research on standardization of hydrogen energy technologies, and ISO/TC197. As for the standardization, in relation to the hydrogen station in the WE-NET second phase research, the laws related to handling of gaseous hydrogen, and the basic issues on facility and safe handling were studied. As for ISO/TC197, the following draft standards were examined: Fuel supply system interface for liquid hydrogen vehicles, fuel tank for liquid hydrogen vehicles, container for liquid hydrogen transport, specification of hydrogen fuel, hydrogen fuel supply facility for air ports, gaseous hydrogen and hydrogen mixture fuel system for vehicles, gaseous hydrogen fuel connector for vehicles, gaseous hydrogen fuel tank for vehicles, and basic items for hydrogen system safety. Final examination of the fuel supply system interface for liquid hydrogen vehicles, and the specification of hydrogen fuel was finished, and these are scheduled to be registered for ISO. (NEDO)

  14. The Simple Publishing Interface (SPI)

    NARCIS (Netherlands)

    Ternier, Stefaan; Massart, David; Totschnig, Michael; Klerkx, Joris; Duval, Erik

    2010-01-01

    Ternier, S., Massart, D., Totschnig, M., Klerkx, J., & Duval, E. (2010). The Simple Publishing Interface (SPI). D-Lib Magazine, September/October 2010, Volume 16 Number 9/10, doi:10.1045/september2010-ternier

  15. Mathematics for 2d Interfaces

    CERN Document Server

    Bardos, Claude

    2010-01-01

    We present here a survey of recent results concerning the mathematical analysis of instabilities of the interface between two incompressible, non viscous, fluids of constant density and vorticity concentrated on the interface. This configuration includes the so-called Kelvin-Helmholtz (the two densities are equal), Rayleigh-Taylor (two different, nonzero, densities) and the water waves (one of the densities is zero) problems. After a brief review of results concerning strong and weak solutions of the Euler equation, we derive interface equations (such as the Birkhoff-Rott equation) that describe the motion of the interface. A linear analysis allows us to exhibit the main features of these equations (such as ellipticity properties); the consequences for the full, non linear, equations are then described. In particular, the solutions of the Kelvin-Helmholtz and Rayleigh-Taylor problems are necessarily analytic if they are above a certain threshold of regularity (a consequence is the illposedness of the initial ...

  16. The Simple Publishing Interface (SPI)

    NARCIS (Netherlands)

    Ternier, Stefaan; Massart, David; Totschnig, Michael; Klerkx, Joris; Duval, Erik

    2010-01-01

    Ternier, S., Massart, D., Totschnig, M., Klerkx, J., & Duval, E. (2010). The Simple Publishing Interface (SPI). D-Lib Magazine, September/October 2010, Volume 16 Number 9/10, doi:10.1045/september2010-ternier

  17. Interface engineering in organic transistors

    Directory of Open Access Journals (Sweden)

    Yeong Don Park

    2007-03-01

    Full Text Available Recent technological advances in organic field-effect transistors (OFETs have triggered intensive research into the molecular and mesoscale structures of organic semiconductor films that determine their charge-transport characteristics. Since the molecular structure and morphology of an organic semiconductor are largely determined by the properties of the interface between the organic film and the insulator, a great deal of research has focused on interface engineering. We review recent progress in interface engineering for the fabrication of high-performance OFETs and, in particular, engineering of the interfaces between semiconductors and insulators. The effects of interfacial characteristics on the molecular and mesoscale structures of π-conjugated molecules and the performance of OFET devices are discussed.

  18. The Ni-YSZ interface

    DEFF Research Database (Denmark)

    Jensen, Karin Vels

    The anode/electrolyte interface in solid oxide fuel cells (SOFC) is known to cause electrical losses. Geometrically simple Ni/yttria-stabilised zirconia (YSZ) interfaces were examined to gain information on the structural and chemical changes occurring during experiments at 1000°C in an atmosphere...... content (99.8% Ni and 99.995% Ni) were used to examine the impact of impurities on the polarisation resistance and contact area morphology. The electropolished nickel wires were pressed against a polished 8 mol% YSZ surface. Extensive structural changes from a flat interface to a hill and valley structure...... between polarised and non-polarised samples. With pure nickel wires, however, the microstructures depended on the polarisation/non-polarisation conditions. At non-polarised conditions a hill and valley type structure was found. Anodic polarisation produced an up to 1 μm thick interface layer consisting...

  19. Det æstetiske interface

    DEFF Research Database (Denmark)

    Andersen, Christian Ulrik

    2006-01-01

    Afhandlingen undersøger computerspillet historisk, teoretisk og analytisk i relation til en interfaceproblematik. Computerspil ses som et fremtrædende eksempel på det æstetiske interface – et interface baseret på sanseoplevelse i stedet for pragmatisk anvendelse. Afhandlingen består af to indbyrdes...... forbundne dele – en kulturhistorisk, diakron undersøgelse af computerspillet og en teoretisk, synkron analyse af det æstetiske interface i computerspillet. Med afsæt i bl.a. en overvejelse af forholdet mellem medie-teknologi og sansning – byggende på Walter Benjamin – og en analyse af computerspillet...... interfacets performative egenskaber. Gennem analyser af spilinter-facet og det pragmatiske interface i deres anvendelsessituation og inddragelse af bl.a. den franske lingvist Émile Benveniste, redegøres der for præcist, hvordan computerspilinterfacet, gennem at lade spilleren udforske computerens fungeren...

  20. Paper Interfaces for Learning Geometry

    OpenAIRE

    Bonnard, Quentin; Verma, Himanshu; Kaplan, Frédéric; Dillenbourg, Pierre

    2012-01-01

    Paper interfaces offer tremendous possibilities for geometry education in primary schools. Existing computer interfaces designed to learn geometry do not consider the integration of conventional school tools, which form the part of the curriculum. Moreover, most of computer tools are designed specifically for individual learning, some propose group activities, but most disregard classroom-level learning, thus impeding their adoption. We present an augmented reality based tabletop system with ...

  1. Interface states at semiconductor junctions

    Energy Technology Data Exchange (ETDEWEB)

    Margaritondo, G. [Institut de Physique Appliquee, Ecole Polytechnique Federale de Lausanne, Lausanne (Switzerland)

    1999-05-01

    The experimental and theoretical progress in understanding the electronic structure and the related parameters of Schottky interfaces and heterojunctions is reviewed. Particular emphasis is devoted to the solution of several historical controversial points, to the impact of novel ab initio theoretical approaches, to new experimental techniques based on synchrotron light and free electron lasers, to the efforts towards controlled modifications of interface parameters and to the foreseeable future developments of this vigorously progressing and technologically crucial field. (author)

  2. User interface for personal accounting

    OpenAIRE

    Femec, Vasilij

    2008-01-01

    This diploma work describes a method for user interface development for an application Bilanca that is intended for a review of personal financial flows. It is a simple application that subtracts outcome from income and shows the current financial state. The work begins with a detailed analysis of the best possible user interface options that give the most comfortable user experience. This is followed by the implementation in a Delphi environment. The results show that even a simple applicati...

  3. Optoelectronics Interfaces for Power Converters

    Directory of Open Access Journals (Sweden)

    Ovidiu Neamtu

    2009-05-01

    Full Text Available The most important issue interface is galvanicseparation between the signal part and the power board.Standards in the field have increased continuouslyelectro-security requirements on the rigidity of thedielectric and insulation resistance. Recommendations forclassical solutions require the use of galvanic separationoptoelectronics devices. Interfacing with a PC or DSP -controller is a target of interposition optical signals viathe power hardware commands.

  4. Interfacing with an EVA Suit

    Science.gov (United States)

    Ross, Amy

    2011-01-01

    A NASA spacesuit under the EVA Technology Domain consists of a suit system; a PLSS; and a Power, Avionics, and Software (PAS) system. Ross described the basic functions, components, and interfaces of the PLSS, which consists of oxygen, ventilation, and thermal control subsystems; electronics; and interfaces. Design challenges were reviewed from a packaging perspective. Ross also discussed the development of the PLSS over the last two decades.

  5. Active matter clusters at interfaces.

    Directory of Open Access Journals (Sweden)

    Katherine eCopenhagen

    2016-03-01

    Full Text Available Collective and directed motility or swarming is an emergent phenomenon displayed by many self-organized assemblies of active biological matter such as clusters of embryonic cells during tissue development, cancerous cells during tumor formation and metastasis, colonies of bacteria in a biofilm, or even flocks of birds and schools of fish at the macro-scale. Such clusters typically encounter very heterogeneous environments. What happens when a cluster encounters an interface between two different environments has implications for its function and fate. Here we study this problem by using a mathematical model of a cluster that treats it as a single cohesive unit that moves in two dimensions by exerting a force/torque per unit area whose magnitude depends on the nature of the local environment. We find that low speed (overdamped clusters encountering an interface with a moderate difference in properties can lead to refraction or even total internal reflection of the cluster. For large speeds (underdamped, where inertia dominates, the clusters show more complex behaviors crossing the interface multiple times and deviating from the predictable refraction and reflection for the low velocity clusters. We then present an extreme limit of the model in the absence of rotational damping where clusters can become stuck spiraling along the interface or move in large circular trajectories after leaving the interface. Our results show a wide range of behaviors that occur when collectively moving active biological matter moves across interfaces and these insights can be used to control motion by patterning environments.

  6. Active matter clusters at interfaces.

    Science.gov (United States)

    Copenhagen, Katherine; Gopinathan, Ajay

    2016-03-01

    Collective and directed motility or swarming is an emergent phenomenon displayed by many self-organized assemblies of active biological matter such as clusters of embryonic cells during tissue development, cancerous cells during tumor formation and metastasis, colonies of bacteria in a biofilm, or even flocks of birds and schools of fish at the macro-scale. Such clusters typically encounter very heterogeneous environments. What happens when a cluster encounters an interface between two different environments has implications for its function and fate. Here we study this problem by using a mathematical model of a cluster that treats it as a single cohesive unit that moves in two dimensions by exerting a force/torque per unit area whose magnitude depends on the nature of the local environment. We find that low speed (overdamped) clusters encountering an interface with a moderate difference in properties can lead to refraction or even total internal reflection of the cluster. For large speeds (underdamped), where inertia dominates, the clusters show more complex behaviors crossing the interface multiple times and deviating from the predictable refraction and reflection for the low velocity clusters. We then present an extreme limit of the model in the absence of rotational damping where clusters can become stuck spiraling along the interface or move in large circular trajectories after leaving the interface. Our results show a wide range of behaviors that occur when collectively moving active biological matter moves across interfaces and these insights can be used to control motion by patterning environments.

  7. Hydrophobic effect at aqueous interfaces

    Science.gov (United States)

    Pohorille, Andrew

    2005-01-01

    Conceptual basis for hydrophobic effects in bulk water and at aqueous interfaces have similar conceptual basis but often manifests itself differently. Using a wide range of computer simulations as the basis, I will review different forms of hydrophobic effects at a variety of interfaces starting from simple liquid-vapor and water-oil interfaces and progressing to water-membrane interfaces. I will start with discussing how water is organized at different interfaces, stressing both similarities and differences. The main thread is that, as in the bulk liquid, hydrophobic effects have profound influence on conformational equilibria and organization of both small molecules and macromolecules, but the result of this influence is quite different. Specifically, it will be shown that many small, but not necessarily amphiphilic molecules tend to accumulate at the interface and, and this tendency will be explained. Furthermore, I will show that many short peptides that are disordered in water spontaneously fold into well-defined structures in the interfacial environment. Biological implications of this self-organizing effect will be discussed.

  8. Spoken Dialogue Interfaces: Integrating Usability

    Science.gov (United States)

    Spiliotopoulos, Dimitris; Stavropoulou, Pepi; Kouroupetroglou, Georgios

    Usability is a fundamental requirement for natural language interfaces. Usability evaluation reflects the impact of the interface and the acceptance from the users. This work examines the potential of usability evaluation in terms of issues and methodologies for spoken dialogue interfaces along with the appropriate designer-needs analysis. It unfolds the perspective to the usability integration in the spoken language interface design lifecycle and provides a framework description for creating and testing usable content and applications for conversational interfaces. Main concerns include the problem identification of design issues for usability design and evaluation, the use of customer experience for the design of voice interfaces and dialogue, and the problems that arise from real-life deployment. Moreover it presents a real-life paradigm of a hands-on approach for applying usability methodologies in a spoken dialogue application environment to compare against a DTMF approach. Finally, the scope and interpretation of results from both the designer and the user standpoint of usability evaluation are discussed.

  9. Magnetosheath-cusp interface

    Directory of Open Access Journals (Sweden)

    S. Savin

    2004-01-01

    Full Text Available We advance the achievements of Interball-1 and other contemporary missions in exploration of the magnetosheath-cusp interface. Extensive discussion of published results is accompanied by presentation of new data from a case study and a comparison of those data within the broader context of three-year magnetopause (MP crossings by Interball-1. Multi-spacecraft boundary layer studies reveal that in ∼80% of the cases the interaction of the magnetosheath (MSH flow with the high latitude MP produces a layer containing strong nonlinear turbulence, called the turbulent boundary layer (TBL. The TBL contains wave trains with flows at approximately the Alfvén speed along field lines and "diamagnetic bubbles" with small magnetic fields inside. A comparison of the multi-point measurements obtained on 29 May 1996 with a global MHD model indicates that three types of populating processes should be operative:

    • large-scale (∼few RE anti-parallel merging at sites remote from the cusp;
    • medium-scale (few thousandkm local TBL-merging of fields that are anti-parallel on average;
    • small-scale (few hundredkm bursty reconnection of fluctuating magnetic fields, representing a continuous mechanism for MSH plasma inflow into the magnetosphere, which could dominate in quasi-steady cases.

    The lowest frequency (∼1–2mHz TBL fluctuations are traced throughout the magnetosheath from the post-bow shock region up to the inner magnetopause border. The resonance of these fluctuations with dayside flux tubes might provide an effective correlative link for the entire dayside region of the solar wind interaction with the magnetopause and cusp ionosphere. The TBL disturbances are characterized by kinked, double-sloped wave power spectra and, most probably, three-wave cascading. Both elliptical polarization and nearly Alfvénic phase velocities with characteristic dispersion indicate the

  10. Interface groups and financial transfer architectures

    CERN Document Server

    Bergstra, Jan A

    2007-01-01

    Analytic execution architectures have been proposed by the same authors as a means to conceptualize the cooperation between heterogeneous collectives of components such as programs, threads, states and services. Interface groups have been proposed as a means to formalize interface information concerning analytic execution architectures. These concepts are adapted to organization architectures with a focus on financial transfers. Interface groups (and monoids) now provide a technique to combine interface elements into interfaces with the flexibility to distinguish between directions of flow dependent on entity naming. The main principle exploiting interface groups is that when composing a closed system of a collection of interacting components, the sum of their interfaces must vanish in the interface group modulo reflection. This certainly matters for financial transfer interfaces. As an example of this, we specify an interface group and within it some specific interfaces concerning the financial transfer arch...

  11. XML Translator for Interface Descriptions

    Science.gov (United States)

    Boroson, Elizabeth R.

    2009-01-01

    A computer program defines an XML schema for specifying the interface to a generic FPGA from the perspective of software that will interact with the device. This XML interface description is then translated into header files for C, Verilog, and VHDL. User interface definition input is checked via both the provided XML schema and the translator module to ensure consistency and accuracy. Currently, programming used on both sides of an interface is inconsistent. This makes it hard to find and fix errors. By using a common schema, both sides are forced to use the same structure by using the same framework and toolset. This makes for easy identification of problems, which leads to the ability to formulate a solution. The toolset contains constants that allow a programmer to use each register, and to access each field in the register. Once programming is complete, the translator is run as part of the make process, which ensures that whenever an interface is changed, all of the code that uses the header files describing it is recompiled.

  12. DIRAC: Secure web user interface

    Energy Technology Data Exchange (ETDEWEB)

    Casajus Ramo, A [University of Barcelona, Diagonal 647, ES-08028 Barcelona (Spain); Sapunov, M, E-mail: sapunov@in2p3.f [Centre de Physique des Particules de Marseille, 163 Av de Luminy Case 902 13288 Marseille (France)

    2010-04-01

    Traditionally the interaction between users and the Grid is done with command line tools. However, these tools are difficult to use by non-expert users providing minimal help and generating outputs not always easy to understand especially in case of errors. Graphical User Interfaces are typically limited to providing access to the monitoring or accounting information and concentrate on some particular aspects failing to cover the full spectrum of grid control tasks. To make the Grid more user friendly more complete graphical interfaces are needed. Within the DIRAC project we have attempted to construct a Web based User Interface that provides means not only for monitoring the system behavior but also allows to steer the main user activities on the grid. Using DIRAC's web interface a user can easily track jobs and data. It provides access to job information and allows performing actions on jobs such as killing or deleting. Data managers can define and monitor file transfer activity as well as check requests set by jobs. Production managers can define and follow large data productions and react if necessary by stopping or starting them. The Web Portal is build following all the grid security standards and using modern Web 2.0 technologies which allow to achieve the user experience similar to the desktop applications. Details of the DIRAC Web Portal architecture and User Interface will be presented and discussed.

  13. The Evaluation of Interface Design on CDROMs.

    Science.gov (United States)

    Rowley, Jennifer; Slack, Frances

    1997-01-01

    Reviews the literature on the design and evaluation of user interfaces on CD-ROM. Defines interfaces, dialogs and interaction and explores diversity in, and issues associated with, standardization in interface design for CD-ROMs. Reviews current criteria and guidelines for the evaluation of CD-ROM interfaces and proposes alternative guidelines.…

  14. Design of Interfaces for Information Seeking.

    Science.gov (United States)

    Marchionini, Gary; Komlodi, Anita

    1998-01-01

    Examines the current state of user interface design for information seeking. Topics include technology push and interdisciplinarity; research and development; literature trends; user-centered interface design; information seeking in electronic environments; online information retrieval system interfaces; online public access catalog interfaces;…

  15. EFFECTS OF INTERFACES ON GAMMA SHIELDING

    Energy Technology Data Exchange (ETDEWEB)

    Clifford, C.E.

    1963-06-15

    A survey is presented of studies of interface effects in gamma shielding problems. These studies are grouped into three types of approaches, viz.: sources at the interface; radiation backscattered from the interface; and radiation transmitted through the interface. A bibliography of 54 references is included. Limitations on the applicability of the results are discussed. (T.F.H.)

  16. Computational Approaches to Interface Design

    Science.gov (United States)

    Corker; Lebacqz, J. Victor (Technical Monitor)

    1997-01-01

    Tools which make use of computational processes - mathematical, algorithmic and/or knowledge-based - to perform portions of the design, evaluation and/or construction of interfaces have become increasingly available and powerful. Nevertheless, there is little agreement as to the appropriate role for a computational tool to play in the interface design process. Current tools fall into broad classes depending on which portions, and how much, of the design process they automate. The purpose of this panel is to review and generalize about computational approaches developed to date, discuss the tasks which for which they are suited, and suggest methods to enhance their utility and acceptance. Panel participants represent a wide diversity of application domains and methodologies. This should provide for lively discussion about implementation approaches, accuracy of design decisions, acceptability of representational tradeoffs and the optimal role for a computational tool to play in the interface design process.

  17. Physics of Surfaces and Interfaces

    CERN Document Server

    Ibach, Harald

    2006-01-01

    This graduate-level textbook covers the major developments in surface sciences of recent decades, from experimental tricks and basic techniques to the latest experimental methods and theoretical understanding. It is unique in its attempt to treat the physics of surfaces, thin films and interfaces, surface chemistry, thermodynamics, statistical physics and the physics of the solid/electrolyte interface in an integral manner, rather than in separate compartments. The Physics of Surfaces and Interfaces is designed as a handbook for the researcher as well as a study-text for graduate students in physics or chemistry with special interest in the surface sciences, material science, or the nanosciences. The experienced researcher, professional or academic teacher will appreciate the opportunity to share many insights and ideas that have grown out of the author's long experience. Readers will likewise appreciate the wide range of topics treated, each supported by extensive references. Graduate students will benefit f...

  18. PinBus Interface Design

    Energy Technology Data Exchange (ETDEWEB)

    Hammerstrom, Donald J.; Adgerson, Jewel D.; Sastry, Chellury; Pratt, Richard M.; Pratt, Robert G.

    2009-12-30

    On behalf of the U.S. Department of Energy, PNNL has explored and expanded upon a simple control interface that might have merit for the inexpensive communication of smart grid operational objectives (demand response, for example) to small electric end-use devices and appliances. The approach relies on bi-directional communication via the electrical voltage states of from one to eight shared interconnection pins. The name PinBus has been suggested and adopted for the proposed interface protocol. The protocol is defined through the presentation of state diagrams and the pins’ functional definitions. Both simulations and laboratory demonstrations are being conducted to demonstrate the elegance and power of the suggested approach. PinBus supports a very high degree of interoperability across its interfaces, allowing innumerable pairings of devices and communication protocols and supporting the practice of practically any smart grid use case.

  19. Multi-robot control interface

    Science.gov (United States)

    Bruemmer, David J [Idaho Falls, ID; Walton, Miles C [Idaho Falls, ID

    2011-12-06

    Methods and systems for controlling a plurality of robots through a single user interface include at least one robot display window for each of the plurality of robots with the at least one robot display window illustrating one or more conditions of a respective one of the plurality of robots. The user interface further includes at least one robot control window for each of the plurality of robots with the at least one robot control window configured to receive one or more commands for sending to the respective one of the plurality of robots. The user interface further includes a multi-robot common window comprised of information received from each of the plurality of robots.

  20. Interfacing with the computational brain.

    Science.gov (United States)

    Jackson, Andrew; Fetz, Eberhard E

    2011-10-01

    Neuroscience is just beginning to understand the neural computations that underlie our remarkable capacity to learn new motor tasks. Studies of natural movements have emphasized the importance of concepts such as dimensionality reduction within hierarchical levels of redundancy, optimization of behavior in the presence of sensorimotor noise and internal models for predictive control. These concepts also provide a framework for understanding the improvements in performance seen in myoelectric-controlled interface and brain-machine interface paradigms. Recent experiments reveal how volitional activity in the motor system combines with sensory feedback to shape neural representations and drives adaptation of behavior. By elucidating these mechanisms, a new generation of intelligent interfaces can be designed to exploit neural plasticity and restore function after neurological injury.

  1. Coordinating user interfaces for consistency

    CERN Document Server

    Nielsen, Jakob

    2001-01-01

    In the years since Jakob Nielsen's classic collection on interface consistency first appeared, much has changed, and much has stayed the same. On the one hand, there's been exponential growth in the opportunities for following or disregarding the principles of interface consistency-more computers, more applications, more users, and of course the vast expanse of the Web. On the other, there are the principles themselves, as persistent and as valuable as ever. In these contributed chapters, you'll find details on many methods for seeking and enforcing consistency, along with bottom-line analys

  2. Artful interfaces within biological materials

    Directory of Open Access Journals (Sweden)

    John W.C. Dunlop

    2011-03-01

    Full Text Available Biological materials have a wide range of mechanical properties matching their biological function. This is achieved via complex structural hierarchies, spanning many length scales, arising from the assembly of different sized building blocks during growth. The interfaces between these building blocks can increase resistance to fracture, join materials of different character, make them deform more easily and provide motility. While they represent only a tiny fraction of the overall volume, interfaces are essential for the integrity and function of the overall tissue. Understanding their construction principles, often based on specialized molecular assemblies, may change our current thinking about composite materials.

  3. Immersed interface methods. Final report

    Energy Technology Data Exchange (ETDEWEB)

    LeVeque, R.J.; Adams, L.M.; Bube, K.P.

    1996-11-01

    Cartesian grid methods encompass a wide variety of techniques used to solve partial differential equations in more than one space dimension on uniform Cartesian grids even when the underlying geometry is complex and not aligned with the grid. The authors` groups work on Immersed Interface Methods (IIM) was originally motivated by the desire to understand and improve the ``Immersed Boundary Method``, developed by Charles Peskin to solve incompressible Navier-Stokes equations in complicated geometries with moving elastic boundaries. This report briefly discusses the development of the Immersed Interface Methods and gives examples of application of the method in solving several partial differential equations.

  4. DHMI: dynamic holographic microscopy interface

    Science.gov (United States)

    He, Xuefei; Zheng, Yujie; Lee, Woei Ming

    2016-12-01

    Digital holographic microscopy (DHM) is a powerful in-vitro biological imaging tool. In this paper, we report a fully automated off-axis digital holographic microscopy system completed with a graphical user interface in the Matlab environment. The interface primarily includes Fourier domain processing, phase reconstruction, aberration compensation and autofocusing. A variety of imaging operations such as region of interest selection, de-noising mode (filtering and averaging), low frame rate imaging for immediate reconstruction and high frame rate imaging routine ( 27 fps) are implemented to facilitate ease of use.

  5. The interface at the skin

    DEFF Research Database (Denmark)

    Hansen, Lone Koefoed

    2011-01-01

    experimental dresses made by Philips within the field of wearable computing subscribe to the concept of ‘ideal communication’. In her article, she explains how this particular type of communication is linked to the paranormal phenomena of mind reading and telepathy, and argues that sensor-based wearable......In the development of and discourses around interfaces there has always been a strong urge to bypass representation and ‘jack’ directly in to the human brain, consciousness, perceptions and feelings. In her article ”The interface at the skin” Lone Koefoed Hansen looks at how two contemporary...

  6. Inhomogeneous interface laser mirror coatings.

    Science.gov (United States)

    Ledger, A M

    1979-09-01

    Methods of improving the durability of thin-film laser mirror coatings for 10.6 microm using thorium fluoride, zinc selenide, and zinc sulfide materials have been investigated. The largest improvement in film durability was obtained by using inhomogeneous interface fabrication for all the dielectric-dielectric interfaces and by incorporating cerium fluoride protective overcoating material into the film design. Experimental results are given for enhanced reflectors, polarization-selective coatings, and buried-grating aperture-sharing coatings designed for high-power laser applications.

  7. Chemical reactions at aqueous interfaces

    Science.gov (United States)

    Vecitis, Chad David

    2009-12-01

    Interfaces or phase boundaries are a unique chemical environment relative to individual gas, liquid, or solid phases. Interfacial reaction mechanisms and kinetics are often at variance with homogeneous chemistry due to mass transfer, molecular orientation, and catalytic effects. Aqueous interfaces are a common subject of environmental science and engineering research, and three environmentally relevant aqueous interfaces are investigated in this thesis: 1) fluorochemical sonochemistry (bubble-water), 2) aqueous aerosol ozonation (gas-water droplet), and 3) electrolytic hydrogen production and simultaneous organic oxidation (water-metal/semiconductor). Direct interfacial analysis under environmentally relevant conditions is difficult, since most surface-specific techniques require relatively `extreme' conditions. Thus, the experimental investigations here focus on the development of chemical reactors and analytical techniques for the completion of time/concentration-dependent measurements of reactants and their products. Kinetic modeling, estimations, and/or correlations were used to extract information on interfacially relevant processes. We found that interfacial chemistry was determined to be the rate-limiting step to a subsequent series of relatively fast homogeneous reactions, for example: 1) Pyrolytic cleavage of the ionic headgroup of perfluorooctanesulfonate (PFOS) and perfluorooctanoate (PFOA) adsorbed to cavitating bubble-water interfaces during sonolysis was the rate-determining step in transformation to their inorganic constituents carbon monoxide, carbon dioxide, and fluoride; 2) ozone oxidation of aqueous iodide to hypoiodous acid at the aerosol-gas interface is the rate-determining step in the oxidation of bromide and chloride to dihalogens; 3) Electrolytic oxidation of anodic titanol surface groups is rate-limiting for the overall oxidation of organics by the dichloride radical. We also found chemistry unique to the interface, for example: 1

  8. Performance Metrics for Haptic Interfaces

    CERN Document Server

    Samur, Evren

    2012-01-01

    Haptics technology is being used more and more in different applications, such as in computer games for increased immersion, in surgical simulators to create a realistic environment for training of surgeons, in surgical robotics due to safety issues and in mobile phones to provide feedback from user action. The existence of these applications highlights a clear need to understand performance metrics for haptic interfaces and their implications on device design, use and application. Performance Metrics for Haptic Interfaces aims at meeting this need by establishing standard practices for the ev

  9. A database for TMT interface control documents

    Science.gov (United States)

    Gillies, Kim; Roberts, Scott; Brighton, Allan; Rogers, John

    2016-08-01

    The TMT Software System consists of software components that interact with one another through a software infrastructure called TMT Common Software (CSW). CSW consists of software services and library code that is used by developers to create the subsystems and components that participate in the software system. CSW also defines the types of components that can be constructed and their roles. The use of common component types and shared middleware services allows standardized software interfaces for the components. A software system called the TMT Interface Database System was constructed to support the documentation of the interfaces for components based on CSW. The programmer describes a subsystem and each of its components using JSON-style text files. A command interface file describes each command a component can receive and any commands a component sends. The event interface files describe status, alarms, and events a component publishes and status and events subscribed to by a component. A web application was created to provide a user interface for the required features. Files are ingested into the software system's database. The user interface allows browsing subsystem interfaces, publishing versions of subsystem interfaces, and constructing and publishing interface control documents that consist of the intersection of two subsystem interfaces. All published subsystem interfaces and interface control documents are versioned for configuration control and follow the standard TMT change control processes. Subsystem interfaces and interface control documents can be visualized in the browser or exported as PDF files.

  10. BASIN: Beowulf Analysis Symbolic INterface

    Science.gov (United States)

    Vesperini, Enrico; Goldberg, David M.; McMillan, Stephen L. W.; Dura, James; Jones, Douglas

    2013-08-01

    BASIN (Beowulf Analysis Symbolic INterface) is a flexible, integrated suite of tools for multiuser parallel data analysis and visualization that allows researchers to harness the power of Beowulf PC clusters and multi-processor machines without necessarily being experts in parallel programming. It also includes general tools for data distribution and parallel operations on distributed data for developing libraries for specific tasks.

  11. Miniaturized neural interfaces and implants

    Science.gov (United States)

    Stieglitz, Thomas; Boretius, Tim; Ordonez, Juan; Hassler, Christina; Henle, Christian; Meier, Wolfgang; Plachta, Dennis T. T.; Schuettler, Martin

    2012-03-01

    Neural prostheses are technical systems that interface nerves to treat the symptoms of neurological diseases and to restore sensory of motor functions of the body. Success stories have been written with the cochlear implant to restore hearing, with spinal cord stimulators to treat chronic pain as well as urge incontinence, and with deep brain stimulators in patients suffering from Parkinson's disease. Highly complex neural implants for novel medical applications can be miniaturized either by means of precision mechanics technologies using known and established materials for electrodes, cables, and hermetic packages or by applying microsystems technologies. Examples for both approaches will be introduced and discussed. Electrode arrays for recording of electrocorticograms during presurgical epilepsy diagnosis have been manufactured using approved materials and a marking laser to achieve an integration density that is adequate in the context of brain machine interfaces, e.g. on the motor cortex. Microtechnologies have to be used for further miniaturization to develop polymer-based flexible and light weighted electrode arrays to interface the peripheral and central nervous system. Polyimide as substrate and insulation material will be discussed as well as several application examples for nerve interfaces like cuffs, filament like electrodes and large arrays for subdural implantation.

  12. Interface design for digital courses

    NARCIS (Netherlands)

    Tabbers, Huib; Kester, Liesbeth; Hummel, Hans; Nadolski, Rob

    2005-01-01

    This text should be referred to as: Tabbers, H., Kester, L., Hummel, H. G. K., & Nadolski, R. J. (2003). Interface design for digital courses. In W. Jochems, J. van Merriënboer, & R. Koper (Eds). Integrated e-learning: implications for pedagogy, technology & organisation (pp. 100-111). London: Routl

  13. Interface design for digital courses

    NARCIS (Netherlands)

    Tabbers, H.; Kester, L.; Hummel, H.; Nadolski, R.; Jochems, W.; Merriënboer, J.; Koper, R.

    2003-01-01

    An important question in web-based education is how to deal with the design of the interface. What will the actual screen look like? Two main issues that are especially relevant for educational purposes are discussed, both from a Human-Computer Interaction and an Educational Psychology perspective.

  14. Interface design for digital courses

    NARCIS (Netherlands)

    Tabbers, Huib; Kester, Liesbeth; Hummel, Hans; Nadolski, Rob

    2005-01-01

    This text should be referred to as: Tabbers, H., Kester, L., Hummel, H. G. K., & Nadolski, R. J. (2003). Interface design for digital courses. In W. Jochems, J. van Merriënboer, & R. Koper (Eds). Integrated e-learning: implications for pedagogy, technology & organisation (pp. 100-111). London: Routl

  15. The steel–concrete interface

    DEFF Research Database (Denmark)

    Angst, Ueli M.; Geiker, Mette Rica; Michel, Alexander

    2017-01-01

    Although the steel–concrete interface (SCI) is widely recognized to influence the durability of reinforced concrete, a systematic overview and detailed documentation of the various aspects of the SCI are lacking. In this paper, we compiled a comprehensive list of possible local characteristics...

  16. Surface Waves on Metamaterials Interfaces

    DEFF Research Database (Denmark)

    Takayama, Osamu; Shkondin, Evgeniy; Panah, Mohammad Esmail Aryaee

    2016-01-01

    We analyze surface electromagnetic waves supported at the interface between isotropic medium and effective anisotropic material that can be realized by alternating conductive and dielectrics layers. This configuration can host various types of surface waves and therefore can serve as a rich platf...

  17. Interfacing DNA nanodevices with biology

    DEFF Research Database (Denmark)

    Vinther, Mathias; Kjems, Jørgen

    2016-01-01

    in biology and biomedicine acting as a molecular ‘nanorobot’ or smart drug interacting with the cellular machinery. In this review, we will explore and examine the perspective of DNA nanotechnology for such use. We summarize which requirements DNA nanostructures must fulfil to function in cellular...... environments and inside living organisms. In addition, we highlight recent advances in interfacing DNA nanostructures with biology....

  18. Tactile melodies in user interfaces

    NARCIS (Netherlands)

    Veen, H.A.H.C. van; Erp, J.B.F. van

    2003-01-01

    The application of dynamic vibrotactile displays in user interfaces is still a rare situation. There are, however, several important advantages of using the sense of touch as an information channel, especially in relation to overloaded or unavailable visual and auditory channels. We propose here to

  19. Human-computer interface design

    Energy Technology Data Exchange (ETDEWEB)

    Bowser, S.E.

    1995-04-01

    Modern military forces assume that computer-based information is reliable, timely, available, usable, and shared. The importance of computer-based information is based on the assumption that {open_quotes}shared situation awareness, coupled with the ability to conduct continuous operations, will allow information age armies to observe, decide, and act faster, more correctly and more precisely than their enemies.{close_quotes} (Sullivan and Dubik 1994). Human-Computer Interface (HCI) design standardization is critical to the realization of the previously stated assumptions. Given that a key factor of a high-performance, high-reliability system is an easy-to-use, effective design of the interface between the hardware, software, and the user, it follows logically that the interface between the computer and the military user is critical to the success of the information-age military. The proliferation of computer technology has resulted in the development of an extensive variety of computer-based systems and the implementation of varying HCI styles on these systems. To accommodate the continued growth in computer-based systems, minimize HCI diversity, and improve system performance and reliability, the U.S. Department of Defense (DoD) is continuing to adopt interface standards for developing computer-based systems.

  20. Robust brain-computer interfaces

    NARCIS (Netherlands)

    Reuderink, Boris

    2011-01-01

    A brain-computer interface (BCI) enables direct communication from the brain to devices, bypassing the traditional pathway of peripheral nerves and muscles. Current BCIs aimed at patients require that the user invests weeks, or even months, to learn the skill to intentionally modify their brain sign

  1. Surface Waves on Metamaterials Interfaces

    DEFF Research Database (Denmark)

    Takayama, Osamu; Shkondin, Evgeniy; Panah, Mohammad Esmail Aryaee;

    2016-01-01

    We analyze surface electromagnetic waves supported at the interface between isotropic medium and effective anisotropic material that can be realized by alternating conductive and dielectrics layers. This configuration can host various types of surface waves and therefore can serve as a rich platf...

  2. Gluing Soft Interfaces by Nanoparticles

    Science.gov (United States)

    Cao, Zhen; Dobrynin, Andrey

    Using a combination of the molecular dynamics simulations and scaling analysis we studied reinforcement of interface between two soft gel-like materials by spherical nanoparticles. Analysis of the simulations shows that the depth of penetration of a nanoparticle into a gel is determined by a balance of the elastic energy of the gel and nanoparticle deformations and the surface energy of nanoparticle/gel interface. In order to evaluate work of adhesion of the reinforced interface, the potential of mean force for separation of two gels was calculated. These simulations showed that the gel separation proceeds through formation of necks connecting nanoparticle with two gels. The shapes of the necks are controlled by a fine interplay between nanoparticle/gel surface energies and elastic energy of the neck deformation. Our simulations showed that by introducing nanoparticles at soft interfaces, the work required for separation of two gels could be 10-100 times larger than the work of adhesion between two gels without nanoparticle reinforcement. These results provide insight in understanding the mechanism of gluing soft gels and biological tissues by nano- and micro-sized particles. NSF DMR-1409710.

  3. Embodied agents in de interface

    NARCIS (Netherlands)

    Evers, M.J.; Nijholt, A.

    2001-01-01

    Steeds meer zien we het gebruik van mensachtige, geanimeerde figuren in interfaces en andere software applicaties, niet alleen in onderzoeksprojecten maar ook in commerciële software. Een voorbeeld dat bijna iedereen wel kent (en waar velen wel wat op aan te merken hebben) is de ‘office assistant’ i

  4. Spray algorithm without interface construction

    Science.gov (United States)

    Al-Kadhem Majhool, Ahmed Abed; Watkins, A. P.

    2012-05-01

    This research is aimed to create a new and robust family of convective schemes to capture the interface between the dispersed and the carrier phases in a spray without the need to build up the interface boundary. The selection of the Weighted Average Flux (WAF) scheme is due to this scheme being designed to deal with random flux scheme which is second-order accurate in space and time. The convective flux in each cell face utilizes the WAF scheme blended with Switching Technique for Advection and Capturing of Surfaces (STACS) scheme for high resolution flux limiters. In the next step, the high resolution scheme is blended with the WAF scheme to provide the sharpness and boundedness of the interface by using switching strategy. In this work, the Eulerian-Eulerian framework of non-reactive turbulent spray is set in terms of theoretical proposed methodology namely spray moments of drop size distribution, presented by Beck and Watkins [1]. The computational spray model avoids the need to segregate the local droplet number distribution into parcels of identical droplets. The proposed scheme is tested on capturing the spray edges in modelling hollow cone sprays without need to reconstruct two-phase interface. A test is made on simple comparison between TVD scheme and WAF scheme using the same flux limiter on convective flow hollow cone spray. Results show the WAF scheme gives a better prediction than TVD scheme. The only way to check the accuracy of the presented models is by evaluating the spray sheet thickness.

  5. Brush/Fin Thermal Interfaces

    Science.gov (United States)

    Knowles, Timothy R.; Seaman, Christopher L.; Ellman, Brett M.

    2004-01-01

    Brush/fin thermal interfaces are being developed to increase heat-transfer efficiency and thereby enhance the thermal management of orbital replaceable units (ORUs) of electronic and other equipment aboard the International Space Station. Brush/fin thermal interfaces could also be used to increase heat-transfer efficiency in terrestrial electronic and power systems. In a typical application according to conventional practice, a replaceable heat-generating unit includes a mounting surface with black-anodized metal fins that mesh with the matching fins of a heat sink or radiator on which the unit is mounted. The fins do not contact each other, but transfer heat via radiation exchange. A brush/fin interface also includes intermeshing fins, the difference being that the gaps between the fins are filled with brushes made of carbon or other fibers. The fibers span the gap between intermeshed fins, allowing heat transfer by conduction through the fibers. The fibers are attached to the metal surfaces as velvet-like coats in the manner of the carbon fiber brush heat exchangers described in the preceding article. The fiber brushes provide both mechanical compliance and thermal contact, thereby ensuring low contact thermal resistance. A certain amount of force is required to intermesh the fins due to sliding friction of the brush s fiber tips against the fins. This force increases linearly with penetration distance, reaching 1 psi (6.9 kPa) for full 2-in. (5.1 cm) penetration for the conventional radiant fin interface. Removal forces can be greater due to fiber buckling upon reversing the sliding direction. This buckling force can be greatly reduced by biasing the fibers at an angle perpendicularly to the sliding direction. Means of containing potentially harmful carbon fiber debris, which is electrically conductive, have been developed. Small prototype brush/fin thermal interfaces have been tested and found to exhibit temperature drops about onesixth of that of conventional

  6. Technique for converting non-conforming hexahedral-to-hexahedral interfaces into conforming interfaces

    Science.gov (United States)

    Staten, Matthew L.; Shepherd, Jason F.; Ledoux, Frank; Shimada, Kenji; Merkley, Karl G.; Carbonera, Carlos

    2013-03-05

    A technique for conforming an interface between a first mesh and a second mesh is disclosed. A first interface surface in the first mesh and a second interface surface in the second mesh residing along the interface are identified. The first and second interface surfaces are initially non-conforming along the interface. Chords within the first and second interface surfaces that fall within a threshold separation distance of each other are paired. Sheets having chords that reside within the first or second interface surfaces are recursively inserted into or extracted from one or both of the first and second meshes until all remaining chords within the first interface surface are paired with corresponding chords in the second interface surface and all remaining chords within the second interface surface are paired with corresponding chords in the first interface surface.

  7. MIB Galerkin method for elliptic interface problems

    Science.gov (United States)

    Xia, Kelin; Zhan, Meng; Wei, Guo-Wei

    2014-01-01

    Summary Material interfaces are omnipresent in the real-world structures and devices. Mathematical modeling of material interfaces often leads to elliptic partial differential equations (PDEs) with discontinuous coefficients and singular sources, which are commonly called elliptic interface problems. The development of high-order numerical schemes for elliptic interface problems has become a well defined field in applied and computational mathematics and attracted much attention in the past decades. Despite of significant advances, challenges remain in the construction of high-order schemes for nonsmooth interfaces, i.e., interfaces with geometric singularities, such as tips, cusps and sharp edges. The challenge of geometric singularities is amplified when they are associated with low solution regularities, e.g., tip-geometry effects in many fields. The present work introduces a matched interface and boundary (MIB) Galerkin method for solving two-dimensional (2D) elliptic PDEs with complex interfaces, geometric singularities and low solution regularities. The Cartesian grid based triangular elements are employed to avoid the time consuming mesh generation procedure. Consequently, the interface cuts through elements. To ensure the continuity of classic basis functions across the interface, two sets of overlapping elements, called MIB elements, are defined near the interface. As a result, differentiation can be computed near the interface as if there is no interface. Interpolation functions are constructed on MIB element spaces to smoothly extend function values across the interface. A set of lowest order interface jump conditions is enforced on the interface, which in turn, determines the interpolation functions. The performance of the proposed MIB Galerkin finite element method is validated by numerical experiments with a wide range of interface geometries, geometric singularities, low regularity solutions and grid resolutions. Extensive numerical studies confirm

  8. MIB Galerkin method for elliptic interface problems.

    Science.gov (United States)

    Xia, Kelin; Zhan, Meng; Wei, Guo-Wei

    2014-12-15

    Material interfaces are omnipresent in the real-world structures and devices. Mathematical modeling of material interfaces often leads to elliptic partial differential equations (PDEs) with discontinuous coefficients and singular sources, which are commonly called elliptic interface problems. The development of high-order numerical schemes for elliptic interface problems has become a well defined field in applied and computational mathematics and attracted much attention in the past decades. Despite of significant advances, challenges remain in the construction of high-order schemes for nonsmooth interfaces, i.e., interfaces with geometric singularities, such as tips, cusps and sharp edges. The challenge of geometric singularities is amplified when they are associated with low solution regularities, e.g., tip-geometry effects in many fields. The present work introduces a matched interface and boundary (MIB) Galerkin method for solving two-dimensional (2D) elliptic PDEs with complex interfaces, geometric singularities and low solution regularities. The Cartesian grid based triangular elements are employed to avoid the time consuming mesh generation procedure. Consequently, the interface cuts through elements. To ensure the continuity of classic basis functions across the interface, two sets of overlapping elements, called MIB elements, are defined near the interface. As a result, differentiation can be computed near the interface as if there is no interface. Interpolation functions are constructed on MIB element spaces to smoothly extend function values across the interface. A set of lowest order interface jump conditions is enforced on the interface, which in turn, determines the interpolation functions. The performance of the proposed MIB Galerkin finite element method is validated by numerical experiments with a wide range of interface geometries, geometric singularities, low regularity solutions and grid resolutions. Extensive numerical studies confirm the

  9. Ionic Structure at Dielectric Interfaces

    Science.gov (United States)

    Jing, Yufei

    The behavior of ions in liquids confined between macromolecules determines the outcome of many nanoscale assembly processes in synthetic and biological materials such as colloidal dispersions, emulsions, hydrogels, DNA, cell membranes, and proteins. Theoretically, the macromolecule-liquid boundary is often modeled as a dielectric interface and an important quantity of interest is the ionic structure in a liquid confined between two such interfaces. The knowledge gleaned from the study of ionic structure in such models can be useful in several industrial applications, such as biosensors, lithium-ion batteries double-layer supercapacitors for energy storage and seawater desalination. Electrostatics plays a critical role in the development of such functional materials. Many of the functions of these materials, result from charge and composition heterogeneities. There are great challenges in solving electrostatics problems in heterogeneous media with arbitrary shapes because electrostatic interactions remains unknown but depend on the particular density of charge distributions. Charged molecules in heterogeneous media affect the media's dielectric response and hence the interaction between the charges is unknown since it depends on the media and on the geometrical properties of the interfaces. To determine the properties of heterogeneous systems including crucial effects neglected in classical mean field models such as the hard core of the ions, the dielectric mismatch and interfaces with arbitrary shapes. The effect of hard core interactions accounts properly for short range interactions and the effect of local dielectric heterogeneities in the presence of ions and/or charged molecules for long-range interactions are both analyzed via an energy variational principle that enables to update charges and the medium's response in the same simulation time step. In particular, we compute the ionic structure in a model system of electrolyte confined by two planar dielectric

  10. UNIVERSAL INTERFACE TO MULTIPLE OPERATIONS SYSTEMS

    DEFF Research Database (Denmark)

    Sonnenwald, Diane H.

    1986-01-01

    Alternative ways to provide access to operations systems that maintain, test, and configure complex telephone networks are being explored. It is suggested that a universal interface that provides simultaneous access to multiple operations systems that execute in different hardware and software...... environments, can be provided by an architecture that is based on the separation of presentation issues from application issues and on a modular interface management system that consists of a virtual user interface, physical user interface, and interface agent. The interface functionality that is needed...

  11. UNIVERSAL INTERFACE TO MULTIPLE OPERATIONS SYSTEMS

    DEFF Research Database (Denmark)

    Sonnenwald, Diane H.

    1986-01-01

    Alternative ways to provide access to operations systems that maintain, test, and configure complex telephone networks are being explored. It is suggested that a universal interface that provides simultaneous access to multiple operations systems that execute in different hardware and software...... environments, can be provided by an architecture that is based on the separation of presentation issues from application issues and on a modular interface management system that consists of a virtual user interface, physical user interface, and interface agent. The interface functionality that is needed...

  12. Human Computer Interface Design Criteria. Volume 1. User Interface Requirements

    Science.gov (United States)

    2010-03-19

    2 entitled Human Computer Interface ( HCI )Design Criteria Volume 1: User Interlace Requirements which contains the following major changes from...MISSILE SYSTEMS CENTER Air Force Space Command 483 N. Aviation Blvd. El Segundo, CA 90245 4. This standard has been approved for use on all Space and...and efficient model of how the system works and can generalize this knowledge to other systems. According to Mayhew in Principles and Guidelines in

  13. ACPYPE - AnteChamber PYthon Parser interfacE

    Directory of Open Access Journals (Sweden)

    Sousa da Silva Alan W

    2012-07-01

    Full Text Available Abstract Background ACPYPE (or AnteChamber PYthon Parser interfacE is a wrapper script around the ANTECHAMBER software that simplifies the generation of small molecule topologies and parameters for a variety of molecular dynamics programmes like GROMACS, CHARMM and CNS. It is written in the Python programming language and was developed as a tool for interfacing with other Python based applications such as the CCPN software suite (for NMR data analysis and ARIA (for structure calculations from NMR data. ACPYPE is open source code, under GNU GPL v3, and is available as a stand-alone application at http://www.ccpn.ac.uk/acpype and as a web portal application at http://webapps.ccpn.ac.uk/acpype. Findings We verified the topologies generated by ACPYPE in three ways: by comparing with default AMBER topologies for standard amino acids; by generating and verifying topologies for a large set of ligands from the PDB; and by recalculating the structures for 5 protein–ligand complexes from the PDB. Conclusions ACPYPE is a tool that simplifies the automatic generation of topology and parameters in different formats for different molecular mechanics programmes, including calculation of partial charges, while being object oriented for integration with other applications.

  14. Interface dynamos in supernova progenitors

    CERN Document Server

    Blackman, E G; Thomas, J H; Blackman, Eric G.; Nordhaus, Jason T.; Thomas, John H.

    2004-01-01

    Observational evidence for anisotropy in supernovae (SN) and their phenomenological connection to jetted sources such as gamma-ray bursts^Mhave revived considerations of the role magnetohydrodynamic outflows might play therein. Understanding the types of dynamos that might operate in supernova progenitors is therefore relevant. In contrast to previous work, here we study an ``interface dynamo'' for the conditions of a rapidly rotating neutron star surrounded by a convective envelope. Such dynamos have been studied for the Sun, naked white dwarfs,and post-AGB stars, where analogous configurations of strong shear layers surrounded by convective envelopes are present. The interface dynamo provides estimates of large-scale poloidal and toroidal fields, whose product enters the Poynting flux. Because the poloidal field is much weaker than the toroidal magnetic field, the actual average Poynting flux is lower than rough estimates which invoke the only the magnitude of the total magnetic energy. The lower value is s...

  15. IVOA Recommendation: IVOA Support Interfaces

    CERN Document Server

    Graham, Matthew; Grid,

    2011-01-01

    This document describes the minimum interface that a (SOAP- or REST-based) web service requires to participate in the IVOA. Note that this is not required of standard VO services developed prior to this specification, although uptake is strongly encouraged on any subsequent revision. All new standard VO services, however, must feature a VOSI-compliant interface. This document has been produced by the Grid and Web Services Working Group. It has been reviewed by IVOA Members and other interested parties, and has been endorsed by the IVOA Executive Committee as an IVOA Recommendation. It is a stable document and may be used as reference material or cited as a normative reference from another document. IVOA's role in making the Recommendation is to draw attention to the specification and to promote its widespread deployment. This enhances the functionality and interoperability inside the Astronomical Community.

  16. Soft matter at aqueous interfaces

    CERN Document Server

    Liu, Yi

    2016-01-01

    This book covers the science of interfaces between an aqueous phase and a solid, another liquid or a gaseous phase, starting from the basic physical chemistry all the way to state-of-the-art research developments. Both experimental and theoretical methods are treated thanks to the contributions of a distinguished list of authors who are all active researchers in their respective fields. The properties of these interfaces are crucial for a wide variety of processes, products and biological systems and functions, such as the formulation of personal care and food products, paints and coatings, microfluidic and lab-on-a-chip applications, cell membranes, and lung surfactants. Accordingly, research and expertise on the subject are spread over a broad range of academic disciplines and industrial laboratories. This book brings together knowledge from these different places with the aim of fostering education, collaborations and research progress.

  17. Low latency asynchronous interface circuits

    Energy Technology Data Exchange (ETDEWEB)

    Sadowski, Greg

    2017-06-20

    In one form, a logic circuit includes an asynchronous logic circuit, a synchronous logic circuit, and an interface circuit coupled between the asynchronous logic circuit and the synchronous logic circuit. The asynchronous logic circuit has a plurality of asynchronous outputs for providing a corresponding plurality of asynchronous signals. The synchronous logic circuit has a plurality of synchronous inputs corresponding to the plurality of asynchronous outputs, a stretch input for receiving a stretch signal, and a clock output for providing a clock signal. The synchronous logic circuit provides the clock signal as a periodic signal but prolongs a predetermined state of the clock signal while the stretch signal is active. The asynchronous interface detects whether metastability could occur when latching any of the plurality of the asynchronous outputs of the asynchronous logic circuit using said clock signal, and activates the stretch signal while the metastability could occur.

  18. Active matter clusters at interfaces

    CERN Document Server

    Copenhagen, Katherine

    2016-01-01

    Collective and directed motility or swarming is an emergent phenomenon displayed by many self-organized assemblies of active biological matter such as clusters of embryonic cells during tissue development, cancerous cells during tumor formation and metastasis, colonies of bacteria in a biofilm, or even flocks of birds and schools of fish at the macro-scale. Such clusters typically encounter very heterogeneous environments. What happens when a cluster encounters an interface between two different environments has implications for its function and fate. Here we study this problem by using a mathematical model of a cluster that treats it as a single cohesive unit that moves in two dimensions by exerting a force/torque per unit area whose magnitude depends on the nature of the local environment. We find that low speed (overdamped) clusters encountering an interface with a moderate difference in properties can lead to refraction or even total internal reflection of the cluster. For large speeds (underdamped), wher...

  19. Responsive cell-material interfaces.

    Science.gov (United States)

    Dhowre, Hala S; Rajput, Sunil; Russell, Noah A; Zelzer, Mischa

    2015-01-01

    Major design aspects for novel biomaterials are driven by the desire to mimic more varied and complex properties of a natural cellular environment with man-made materials. The development of stimulus responsive materials makes considerable contributions to the effort to incorporate dynamic and reversible elements into a biomaterial. This is particularly challenging for cell-material interactions that occur at an interface (biointerfaces); however, the design of responsive biointerfaces also presents opportunities in a variety of applications in biomedical research and regenerative medicine. This review will identify the requirements imposed on a responsive biointerface and use recent examples to demonstrate how some of these requirements have been met. Finally, the next steps in the development of more complex biomaterial interfaces, including multiple stimuli-responsive surfaces, surfaces of 3D objects and interactive biointerfaces will be discussed.

  20. Nonlinear rheological models for structured interfaces

    NARCIS (Netherlands)

    Sagis, L.M.C.

    2010-01-01

    The GENERIC formalism is a formulation of nonequilibrium thermodynamics ideally suited to develop nonlinear constitutive equations for the stress–deformation behavior of complex interfaces. Here we develop a GENERIC model for multiphase systems with interfaces displaying nonlinear viscoelastic stres

  1. Adapting Information Through Tangible Augmented Reality Interfaces

    OpenAIRE

    Sinclair, Patrick; Martinez, Kirk

    2004-01-01

    Tangible augmented reality interfaces offer a hands on approach for examining objects and exploring the associated information. We describe two tangible augmented reality interfaces that can expose the adaptation of information presented to users about objects in augmented reality environments.

  2. Electronic Properties of Semiconductor Interfaces.

    Science.gov (United States)

    1983-02-01

    AD-A130 745 ELECTRONIC PROPERTIES OF SEMICONDUCTOR INTERFACES(U) /; UNIVERSIDAD AUfONOMA DE MADRID (SPAIN) DEPT DE FISICA DEL ESTADO SOLIDO F FLORES...J.Sfinchez-Dehesa 9. PERFORMING ORGANIZATION NAME AND ADDRESS 10. PROGRAM ELEMENT. PROJECT. TASK AREA & WORK UNIT NUMBERS Departamento de Fisica del...resistance (Esaki and Chang 1974). A SL which has received a great deal of attention is GaAs- AlxGa Ix as grown by molecular -beam-epitaxy. Several

  3. Vibrational spectroscopy of water interfaces

    Energy Technology Data Exchange (ETDEWEB)

    Du, Quan [Univ. of California, Berkeley, CA (United States)

    1994-12-01

    The second order nonlinear optical processes of second harmonic generation and sum frequency generation are powerful and versatile tools for studying all kinds of surfaces. They possess unusual surface sensitivity due to the symmetry properties of the second order nonlinear susceptibility. The technique of infrared-visible sum frequency generation (SFG) is particularly attractive because it offers a viable way to do vibrational spectroscopy on any surfaces accessible to light with submonolayer sensitivity. In this thesis, the author applies SFG to study a number of important water interfaces. At the air/water interface, hydrophobic solid/water and liquid/water interfaces, it was found that approximately 25% of surface water molecules have one of their hydrogen pointing away from the liquid water. The large number of unsatisfied hydrogen bonds contributes significantly to the large interfacial energy of the hydrophobic surfaces. At the hydrophilic fused quartz/water interface and a fatty acid monolayer covered water surface, the structure and orientation of surface water molecules are controlled by the hydrogen bonding of water molecules with the surface OH groups and the electrostatic interaction with the surface field from the ionization of surface groups. A change of pH value in the bulk water can significantly change the relative importance of the two interactions and cause a drastic change in orientation of the surface water molecules. SFG has also been applied to study the tribological response of some model lubricant films. Monolayers of Langmuir-Blodgett films were found to disorder orientationaly under mildly high pressure and recover promptly upon removal of the applied pressure.

  4. Tire/runway friction interface

    Science.gov (United States)

    Yager, Thomas J.

    1990-01-01

    An overview is given of NASA Langley's tire/runway pavement interface studies. The National Tire Modeling Program, evaluation of new tire and landing gear designs, tire wear and friction tests, and tire hydroplaning studies are examined. The Aircraft Landing Dynamics Facility is described along with some ground friction measuring vehicles. The major goals and scope of several joint FAA/NASA programs are identified together with current status and plans.

  5. Interface between Context and Theory

    DEFF Research Database (Denmark)

    Chen, Cong; Wang, Daojuan; Zhang, Bin

    2017-01-01

    In this paper, we explores how to consider contextual factors in the development of paradigm theory by focusing on the application and development of agency theory in a cross context. Specifically, the interface between agency theory and context is established from two aspects. On one hand...... and PPC, which shows that the two forms of conflict co-exist in the Chinese context and that the primary or secondary status of either conflict is sensitive to the context....

  6. The Interface Theory of Perception.

    Science.gov (United States)

    Hoffman, Donald D; Singh, Manish; Prakash, Chetan

    2015-12-01

    Perception is a product of evolution. Our perceptual systems, like our limbs and livers, have been shaped by natural selection. The effects of selection on perception can be studied using evolutionary games and genetic algorithms. To this end, we define and classify perceptual strategies and allow them to compete in evolutionary games in a variety of worlds with a variety of fitness functions. We find that veridical perceptions--strategies tuned to the true structure of the world--are routinely dominated by nonveridical strategies tuned to fitness. Veridical perceptions escape extinction only if fitness varies monotonically with truth. Thus, a perceptual strategy favored by selection is best thought of not as a window on truth but as akin to a windows interface of a PC. Just as the color and shape of an icon for a text file do not entail that the text file itself has a color or shape, so also our perceptions of space-time and objects do not entail (by the Invention of Space-Time Theorem) that objective reality has the structure of space-time and objects. An interface serves to guide useful actions, not to resemble truth. Indeed, an interface hides the truth; for someone editing a paper or photo, seeing transistors and firmware is an irrelevant hindrance. For the perceptions of H. sapiens, space-time is the desktop and physical objects are the icons. Our perceptions of space-time and objects have been shaped by natural selection to hide the truth and guide adaptive behaviors. Perception is an adaptive interface.

  7. Interface high-temperature superconductivity

    Science.gov (United States)

    Wang, Lili; Ma, Xucun; Xue, Qi-Kun

    2016-12-01

    Cuprate high-temperature superconductors consist of two quasi-two-dimensional (2D) substructures: CuO2 superconducting layers and charge reservoir layers. The superconductivity is realized by charge transfer from the charge reservoir layers into the superconducting layers without chemical dopants and defects being introduced into the latter, similar to modulation-doping in the semiconductor superlattices of AlGaAs/GaAs. Inspired by this scheme, we have been searching for high-temperature superconductivity in ultra-thin films of superconductors epitaxially grown on semiconductor/oxide substrates since 2008. We have observed interface-enhanced superconductivity in both conventional and unconventional superconducting films, including single atomic layer films of Pb and In on Si substrates and single unit cell (UC) films of FeSe on SrTiO3 (STO) substrates. The discovery of high-temperature superconductivity with a superconducting gap of ∼20 meV in 1UC-FeSe/STO has stimulated tremendous interest in the superconductivity community, for it opens a new avenue for both raising superconducting transition temperature and understanding the pairing mechanism of unconventional high-temperature superconductivity. Here, we review mainly the experimental progress on interface-enhanced superconductivity in the three systems mentioned above with emphasis on 1UC-FeSe/STO, studied by scanning tunneling microscopy/spectroscopy, angle-resolved photoemission spectroscopy and transport experiments. We discuss the roles of interfaces and a possible pairing mechanism inferred from these studies.

  8. User acquaintance with mobile interfaces.

    Science.gov (United States)

    Ehrler, Frederic; Walesa, Magali; Sarrey, Evelyne; Wipfli, Rolf; Lovis, Christian

    2013-01-01

    Handheld technology finds slowly its place in the healthcare world. Some clinicians already use intensively dedicated mobile applications to consult clinical references. However, handheld technology hasn't still broadly embraced to the core of the healthcare business, the hospitals. The weak penetration of handheld technology in the hospitals can be partly explained by the caution of stakeholders that must be convinced about the efficiency of these tools before going forward. In a domain where temporal constraints are increasingly strong, caregivers cannot loose time on playing with gadgets. All users are not comfortable with tactile manipulations and the lack of dedicated peripheral complicates entering data for novices. Stakeholders must be convinced that caregivers will be able to master handheld devices. In this paper, we make the assumption that the proper design of an interface may influence users' performances to record information. We are also interested to find out whether users increase their efficiency when using handheld tools repeatedly. To answer these questions, we have set up a field study to compare users' performances on three different user interfaces while recording vital signs. Some user interfaces were familiar to users, and others were totally innovative. Results showed that users' familiarity with smartphone influences their performances and that users improve their performances by repeating a task.

  9. Atomistic modeling of dislocation-interface interactions

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Jian [Los Alamos National Laboratory; Valone, Steven M [Los Alamos National Laboratory; Beyerlein, Irene J [Los Alamos National Laboratory; Misra, Amit [Los Alamos National Laboratory; Germann, T. C. [Los Alamos National Laboratory

    2011-01-31

    Using atomic scale models and interface defect theory, we first classify interface structures into a few types with respect to geometrical factors, then study the interfacial shear response and further simulate the dislocation-interface interactions using molecular dynamics. The results show that the atomic scale structural characteristics of both heterophases and homophases interfaces play a crucial role in (i) their mechanical responses and (ii) the ability of incoming lattice dislocations to transmit across them.

  10. Nonlinear Spectroscopu of Nanoparticle/Aqueous Interface

    Science.gov (United States)

    2010-10-01

    experiments at air/water interfaces have measured:polarity at a polystyrene sulfonate /water interface,acid-base equilibria at polystyrene nanoparticle...water interface. 2009, Abstracts, 238th ACS National Meeting, Washington, D.C. Polarity of polystyrene colloid/aqueous interface with second harmonic...electrostatic potential, the pH, and the acid-base equilibrium of the carboxyl (-COOH) functional group fixed at the surface of polystyrene carboxyl

  11. Programmable atom-photon quantum interface

    Science.gov (United States)

    Kurz, Christoph; Eich, Pascal; Schug, Michael; Müller, Philipp; Eschner, Jürgen

    2016-06-01

    We present the implementation of a programmable atom-photon quantum interface, employing a single trapped +40Ca ion and single photons. Depending on its mode of operation, the interface serves as a bidirectional atom-photon quantum-state converter, as a source of entangled atom-photon states, or as a quantum frequency converter of single photons. The interface lends itself particularly to interfacing ions with spontaneous parametric down-conversion-based single-photon or entangled-photon-pair sources.

  12. Interface after explosion welding: Fractal analysis

    Science.gov (United States)

    Greenberg, B. A.; Ivanov, M. A.; Pushkin, M. S.; Patselov, A. M.; Volkova, A. Yu.; Inozemtsev, A. V.

    2015-10-01

    The interfaces (plain, wavy) in the welding joints formed by explosion welding are investigated. Various types of fractals, namely, islands, multifractals, and a coastline, are found. The fractal dimensions of islands in the case of a plain interface and a coastline in the case of a wavy interface are calculated.

  13. Refactoring Fat Interfaces Using a Genetic Algorithm

    NARCIS (Netherlands)

    Romano, D.; Raemaekers, S.; Pinzger, M.

    2014-01-01

    Recent studies have shown that the violation of the Interface Segregation Principle (ISP) is critical for maintaining and evolving software systems. Fat interfaces (i.e., interfaces violating the ISP) change more frequently and degrade the quality of the components coupled to them. According to the

  14. An Automation Interface for Kappa PC

    DEFF Research Database (Denmark)

    Hartvig, Susanne C

    1999-01-01

    The reports documents an automation interface for Kappa PC. The automation interface can be used to embed Kappa applications in 32-bit Windowsapplications.The interface includes functions for initialising Kappa, for loading an application, for settingvalues, for getting values, and for stopping...

  15. An Automation Interface for Kappa PC

    DEFF Research Database (Denmark)

    Hartvig, Susanne C

    1999-01-01

    The reports documents an automation interface for Kappa PC. The automation interface can be used to embed Kappa applications in 32-bit Windowsapplications.The interface includes functions for initialising Kappa, for loading an application, for settingvalues, for getting values, and for stopping...

  16. Interface energies in ising spin glasses.

    Science.gov (United States)

    Aspelmeier, T; Moore, M A; Young, A P

    2003-03-28

    The replica method has been used to calculate the interface free energy associated with the change from periodic to antiperiodic boundary conditions in finite-dimensional spin glasses. At mean-field level the interface free energy vanishes, but after allowing for fluctuation effects, a nonzero interface free energy is obtained which is significantly different from numerical expectations.

  17. Refactoring Fat Interfaces Using a Genetic Algorithm

    NARCIS (Netherlands)

    Romano, D.; Raemaekers, S.; Pinzger, M.

    2014-01-01

    Recent studies have shown that the violation of the Interface Segregation Principle (ISP) is critical for maintaining and evolving software systems. Fat interfaces (i.e., interfaces violating the ISP) change more frequently and degrade the quality of the components coupled to them. According to the

  18. Interfaces for instructional use of simulations

    NARCIS (Netherlands)

    Hoog, de Robert; Jong, de Ton; Vries, de Frits

    1991-01-01

    The learner interface is the component of an instructional system that mediates between a learner and the system. Two fundamentally different approaches for interfaces can be distinguished: conversational methapor and direct manipulation metaphor. Interfaces in both metaphors can be scaled on a dime

  19. Metal/Ceramic Interfaces: Relationships between Structures, Chemistry and Interfaces

    Science.gov (United States)

    1991-03-15

    Tech Art.Q-R.TA- Rsdl Strs CrR 7/17/89.10:01 AM.10/18/90I I I ABSTRACTI Metal/ceramic bonds subject to residual stress caused by thermal expansioa I...aalloy > (A120 3 made with alloys having < 67 at.% Ta at 11000C) crack predominantly within the sapphire, I KJM-Evans-16,Tech ArtoQ-RTA- Rsdl Sirs...interface paths: within the reaction product KJM.Evans-16Tech Art.Q-RTA- Rsdl Strs Crk 7/17/89.10:01 AM.10/1890 5 g I I layer, along the reaction

  20. User Interface Development Based on Ontologies

    Institute of Scientific and Technical Information of China (English)

    A; S; Kleshchev; M; Y; Chernyakhovskaya; V; V; Gribova

    2002-01-01

    The user interface is a central component of any mo de rn application program. It determines how well end users accept, learn, and effi ciently work with the application program. The user interface is very difficult to design, to implement, to modify. It takes approximately 70% of the time requ ired for designing an application program. All the existing tools for user interface design can be divided into two basic c ategories-Interface Builders and Model-based Interface development tools, whic h trace t...

  1. Nonlinear optical spectroscopy of soft matter interfaces.

    Science.gov (United States)

    Roke, Sylvie

    2009-07-13

    Soft matter consists of complex molecules that can undergo drastic structural transformations under mild changes of chemical and physical conditions. Since a wide variety of chemical, physical and biological processes occur at soft matter interfaces, they can exhibit complex behavior. This is even more so for interfaces of colloidal soft matter since the relative amount of interface material increases by orders of magnitude. Herein, we focus on new developments that enable us to obtain detailed molecular structural changes in the topmost molecular layers of soft matter interfaces composed of complex bio-molecules. In particular, the possibilities to probe interfaces of colloidal soft matter systems are discussed.

  2. Surface and interface effects in VLSI

    CERN Document Server

    Einspruch, Norman G

    1985-01-01

    VLSI Electronics Microstructure Science, Volume 10: Surface and Interface Effects in VLSI provides the advances made in the science of semiconductor surface and interface as they relate to electronics. This volume aims to provide a better understanding and control of surface and interface related properties. The book begins with an introductory chapter on the intimate link between interfaces and devices. The book is then divided into two parts. The first part covers the chemical and geometric structures of prototypical VLSI interfaces. Subjects detailed include, the technologically most import

  3. Interface Characteristics of Wood-hybrid Composites

    Institute of Scientific and Technical Information of China (English)

    XUEFenglian; ZHAOGuangjie

    2005-01-01

    In order to understand the current interface characteristics of wood-hybrid composites, this paper starts off from the concept of composite interface and general theory of interface form, then the inner-surface and microstructure of wood and the interface characteristics of composites, such as wood- inorganic, wood-plastic and wood- metal made by electroless plating technique, are concluded and discussed in detail. Meanwhile,on the basis of that, some points of view about how to develop the wood-hybrid composites interface research in the future are also proposed.

  4. Molecular Dynamics Simulations of Interface Failure

    Science.gov (United States)

    Bachlechner, Martina E.; Cao, Deng; Leonard, Robert H.; Owens, Eli T.; Swan, Wm. Trevor, III; Ducatman, Samuel C.

    2007-03-01

    The mechanical integrity of silicon/silicon nitride interfaces is of great importance in their applications in micro electronics and solar cells. Large-scale molecular dynamics simulations are an excellent tool to study mechanical and structural failure of interfaces subjected to externally applied stresses and strains. When pulling the system parallel to the interface, cracks in silicon nitride and slip and pit formation in silicon are typical failure mechanisms. Hypervelocity impact perpendicular to the interface plane leads to structural transformation and delamination at the interface. Influence of system temperature, strain rate, impact velocity, and system size on type and characteristics of failure will be discussed.

  5. Experiments showing dynamics of materials interfaces

    Energy Technology Data Exchange (ETDEWEB)

    Benjamin, R.F. [Los Alamos National Lab., NM (United States). Dynamic Experimentation Div.

    1997-02-01

    The discipline of materials science and engineering often involves understanding and controlling properties of interfaces. The authors address the challenge of educating students about properties of interfaces, particularly dynamic properties and effects of unstable interfaces. A series of simple, inexpensive, hands-on activities about fluid interfaces provides students with a testbed to develop intuition about interface dynamics. The experiments highlight the essential role of initial interfacial perturbations in determining the dynamic response of the interface. The experiments produce dramatic, unexpected effects when initial perturbations are controlled and inhibited. These activities help students to develop insight about unstable interfaces that can be applied to analogous problems in materials science and engineering. The lessons examine ``Rayleigh-Taylor instability,`` an interfacial instability that occurs when a higher-density fluid is above a lower-density fluid.

  6. The conversational interface talking to smart devices

    CERN Document Server

    McTear, Michael; Griol, David

    2016-01-01

    This book provides a comprehensive introduction to the conversational interface, which is becoming the main mode of interaction with virtual personal assistants, smart devices, various types of wearables, and social robots. The book consists of four parts: Part I presents the background to conversational interfaces, examining past and present work on spoken language interaction with computers; Part II covers the various technologies that are required to build a conversational interface along with practical chapters and exercises using open source tools; Part III looks at interactions with smart devices, wearables, and robots, and then goes on to discusses the role of emotion and personality in the conversational interface; Part IV examines methods for evaluating conversational interfaces and discusses future directions. · Presents a comprehensive overview of the various technologies that underlie conversational user interfaces; · Combines descriptions of conversational user interface technologies with a gui...

  7. Tailoring thermal interfaces with nanomaterials

    Science.gov (United States)

    Seshadri, Indira

    Thermal interfaces are key to ensure the reliable performance of many semiconductor, energy and electronic systems. High thermal conductivity (k), low elastic modulus (E) interface materials are required to dissipate heat and relieve thermo-mechanical stresses. The aim of this thesis is to develop compliant, high k nanocomposite materials for thermal interface applications utilizing nanostructured networks. Realizing high k nanocomposites is a challenge because of difficulties in incorporating high fractions of uniformly dispersed nanofillers and countering low filler-matrix interfacial conductance, while retaining a low elastic modulus. In this thesis, it is demonstrated that these issues are obviated by using thesis reveals a critical correlation between the rheological behavior of a high k gold-nanowire-filled polydimethylsiloxane nanocomposite and its thermal contact conductance with copper. At a critical filler fraction, an abrupt increase in the nanocomposite k is accompanied by a liquid-solid transition and a multifold decrease in Gc. These concurrent changes are attributed to nanowire percolation network formation and pre-cure polymer gelation that inhibits the formation of conformal void-free interfaces. These findings will be important for designing processing sequences to realize heterointerfaces with nanowire filled high k nanocomposite materials. Another important finding of this thesis is that nanowire networks can result in mechanical softening of polymer matrices. It is demonstrated that silver nanowire fillers result in a three-fold decrease in viscoelastic storage modulus of polydimethylsiloxane composites above a low critical filler fraction of ~0.5%, contrary to theoretical predictions presaging a modulus increase. Similar fractions of silver nanocube fillers result in no such observable effects. Rheology measurements and calorimetric kinetics analyses reveal that high surface area nanowire filler percolation networks curtail macromolecular

  8. Surface rheology and interface stability.

    Energy Technology Data Exchange (ETDEWEB)

    Yaklin, Melissa A.; Cote, Raymond O.; Moffat, Harry K.; Grillet, Anne Mary; Walker, Lynn; Koehler, Timothy P.; Reichert, Matthew D. (Carnegie Mellon University, Pittsburgh, PA); Castaneda, Jaime N.; Mondy, Lisa Ann; Brooks, Carlton, F.

    2010-11-01

    We have developed a mature laboratory at Sandia to measure interfacial rheology, using a combination of home-built, commercially available, and customized commercial tools. An Interfacial Shear Rheometer (KSV ISR-400) was modified and the software improved to increase sensitivity and reliability. Another shear rheometer, a TA Instruments AR-G2, was equipped with a du Nouey ring, bicone geometry, and a double wall ring. These interfacial attachments were compared to each other and to the ISR. The best results with the AR-G2 were obtained with the du Nouey ring. A Micro-Interfacial Rheometer (MIR) was developed in house to obtain the much higher sensitivity given by a smaller probe. However, it was found to be difficult to apply this technique for highly elastic surfaces. Interfaces also exhibit dilatational rheology when the interface changes area, such as occurs when bubbles grow or shrink. To measure this rheological response we developed a Surface Dilatational Rheometer (SDR), in which changes in surface tension with surface area are measured during the oscillation of the volume of a pendant drop or bubble. All instruments were tested with various surfactant solutions to determine the limitations of each. In addition, foaming capability and foam stability were tested and compared with the rheology data. It was found that there was no clear correlation of surface rheology with foaming/defoaming with different types of surfactants, but, within a family of surfactants, rheology could predict the foam stability. Diffusion of surfactants to the interface and the behavior of polyelectrolytes were two subjects studied with the new equipment. Finally, surface rheological terms were added to a finite element Navier-Stokes solver and preliminary testing of the code completed. Recommendations for improved implementation were given. When completed we plan to use the computations to better interpret the experimental data and account for the effects of the underlying bulk

  9. Physics and Chemistry of Interfaces

    CERN Document Server

    Butt, Hans-Jurgen; Kappl, Michael

    2003-01-01

    Serving as a general introduction to surface and interface science, this book focuses on essential concepts rather than specific details, on intuitive understanding rather than learning facts. The text reflects the fact that the physics and chemistry of surfaces is a diverse field of research and shows this in its Interdisciplinary conceptual design. Once the most important techniques and methods have been introduced, readers will be able to apply simple models to their own scientific problems. Furthermore, manifold high-end technological applications from surface technology, biotechnology, or

  10. EXPRESS Pallet Payload Interface Requirements

    Science.gov (United States)

    Holt, Alan C.

    2004-01-01

    A viewgraph presentation describing the EXPRESS Pallet Space Station payload interface requirements is shown. The topics include: 1) External Payload Sites; 2) EXPRESS Pallet with Six Payload Envelopes; 3) EXPRESS Pallet in Payload Bay Representative Layout; 4) EXPRESS Pallet Installation SSRMS positions pallet for PAS mating on S3 truss; 5) EXPRESS Pallet Major Components; 6) EXPRESS Pallet Adapter; 7) EXPRESS Pallet Center Location Payload Envelope; 8) Envelope Restriction for EXPRESS Pallet Corner Payload Locations; 9) EXPRESS Pallet-PAS Truss Configuration; and 10) EXPRESS Pallet Payload Services and Specifications.

  11. Metawidgets in the multimodal interface

    Energy Technology Data Exchange (ETDEWEB)

    Blattner, M.M. (Lawrence Livermore National Lab., CA (United States) Anderson (M.D.) Cancer Center, Houston, TX (United States)); Glinert, E.P.; Jorge, J.A.; Ormsby, G.R. (Rensselaer Polytechnic Inst., Troy, NY (United States). Dept. of Computer Science)

    1991-01-01

    We analyze two intertwined and fundamental issues concerning computer-to-human communication in the multimodal interfaces: the interplay between sound and graphics, and the role of object persistence. Our observations lead us to introduce metawidgets as abstract entities capable of manifesting themselves to users as image, as sound, or as various combinations and/or sequences of the two media. We show examples of metawidgets in action, and discuss mechanisms for choosing among alternative media for metawidget instantiation. Finally, we describe a couple of experimental microworlds we have implemented to test out some of our ideas. 17 refs., 7 figs.

  12. Gloved Human-Machine Interface

    Science.gov (United States)

    Adams, Richard (Inventor); Olowin, Aaron (Inventor); Hannaford, Blake (Inventor)

    2015-01-01

    Certain exemplary embodiments can provide a system, machine, device, manufacture, circuit, composition of matter, and/or user interface adapted for and/or resulting from, and/or a method and/or machine-readable medium comprising machine-implementable instructions for, activities that can comprise and/or relate to: tracking movement of a gloved hand of a human; interpreting a gloved finger movement of the human; and/or in response to interpreting the gloved finger movement, providing feedback to the human.

  13. Verified OS Interface Code Synthesis

    Science.gov (United States)

    2016-12-01

    5c.  PROGRAM ELEMENT NUMBER 61102F 6. AUTHOR(S) Gerwin Klein, Toby Murray 5d.  PROJECT NUMBER 5e.  TASK NUMBER 5f.  WORK UNIT NUMBER 7. PERFORMING...llisapi.dll Verified OS Interface Code Synthesis Final Report for AFOSR AOARD Grant FA2386-14-1-4093 Gerwin Klein, Ramana Kumar, Toby Murray gerwin.klein... Murray t +61 2 8306 0550 e gerwin.klein@data61.csiro.au w trustworthy.systems DISTRIBUTION A. Approved for public release: distribution unlimited.

  14. User interface design and evaluation

    CERN Document Server

    Stone, Debbie; Woodroffe, Mark

    2005-01-01

    Whether you are a professional new to the user-centered design field, or an experienced designer who needs to learn the fundamentals of user interface design and evaluation, this book can lead the way.What will you get from this book? Based on a course from the Open University, UK which has been taught to over a thousand professionals and students, this book presents an overview of the field. It illustrates the benefits of a user-centered approach to the design of software, computer systems, and web sites, and provides a clear and practical discussion of requirements gathering; develop

  15. Reengenharia de interfaces utilizando Wrapping.

    OpenAIRE

    Frank José Affonso

    2003-01-01

    Com a evolução tecnológica e com a crescente utilização da Internet, empresas e instituições governamentais desejam migrar seus sistemas desenvolvidos com recursos computacionais antigos (legados) para mais modernos. No entanto, essa é uma tarefa que requer investimentos elevados, podendo o processo de reengenharia ser utilizado nesses casos. Uma forma de modificar esses sistemas é por meio da reengenharia da sua interface, através do empacotamento de sua lógica (wrapping). Essa técnica prese...

  16. INTERFACE REACTION IN MAGNETIC MULTILAYERS

    Institute of Scientific and Technical Information of China (English)

    G.H. Yu; M.H. Li; F.W. Zhu; X.F. Cui; J.L. Jin

    2001-01-01

    Ta/NiO/NiFe/Ta multilayers were prepared by rf reactive and dc magnetron sputter-ing. The exchange coupling field (Hex) between NiO and NiFe reached 120Oe. Thecomposition and chemical states at the interface region of NiO/NiFe were studied us-ing the x-ray photoelectron spectroscopy (XPS) and peak decomposition technique. Theresults show that there are two thermodynamically favorable reactions at NiO/NiFeinterface: NiO+Fe = Ni+FeO and 3NiO+2Fe 3Ni+Fe2 O3. The thickness of thechemical reaction as estimated by angle-resolved XPS was about 1-1.5nm. These in-terrace reaction products are magnetic defects, and we believe that the Hex and thecoereivity (He) of NiO/NiFe ave affected by these defects. Moreover, the results alsoshow that there is an "intermixing layer" at the Ta/NiO (and NiO/Ta) interface dueto a thermodynamically favorable reaction: 2Ta+5NiO=5Ni+Ta2O5. This interfacereaction has an effect on the exchange coupling as well. The thickness of the "inter-mixing layer" as estimated by XPS depth-profiles was about 8-10nm.

  17. Brain Computer Interfaces, a Review

    Science.gov (United States)

    Nicolas-Alonso, Luis Fernando; Gomez-Gil, Jaime

    2012-01-01

    A brain-computer interface (BCI) is a hardware and software communications system that permits cerebral activity alone to control computers or external devices. The immediate goal of BCI research is to provide communications capabilities to severely disabled people who are totally paralyzed or ‘locked in’ by neurological neuromuscular disorders, such as amyotrophic lateral sclerosis, brain stem stroke, or spinal cord injury. Here, we review the state-of-the-art of BCIs, looking at the different steps that form a standard BCI: signal acquisition, preprocessing or signal enhancement, feature extraction, classification and the control interface. We discuss their advantages, drawbacks, and latest advances, and we survey the numerous technologies reported in the scientific literature to design each step of a BCI. First, the review examines the neuroimaging modalities used in the signal acquisition step, each of which monitors a different functional brain activity such as electrical, magnetic or metabolic activity. Second, the review discusses different electrophysiological control signals that determine user intentions, which can be detected in brain activity. Third, the review includes some techniques used in the signal enhancement step to deal with the artifacts in the control signals and improve the performance. Fourth, the review studies some mathematic algorithms used in the feature extraction and classification steps which translate the information in the control signals into commands that operate a computer or other device. Finally, the review provides an overview of various BCI applications that control a range of devices. PMID:22438708

  18. Interface-based software integration

    Directory of Open Access Journals (Sweden)

    Aziz Ahmad Rais

    2016-07-01

    Full Text Available Enterprise architecture frameworks define the goals of enterprise architecture in order to make business processes and IT operations more effective, and to reduce the risk of future investments. These enterprise architecture frameworks offer different architecture development methods that help in building enterprise architecture. In practice, the larger organizations become, the larger their enterprise architecture and IT become. This leads to an increasingly complex system of enterprise architecture development and maintenance. Application software architecture is one type of architecture that, along with business architecture, data architecture and technology architecture, composes enterprise architecture. From the perspective of integration, enterprise architecture can be considered a system of interaction between multiple examples of application software. Therefore, effective software integration is a very important basis for the future success of the enterprise architecture in question. This article will provide interface-based integration practice in order to help simplify the process of building such a software integration system. The main goal of interface-based software integration is to solve problems that may arise with software integration requirements and developing software integration architecture.

  19. Interface-based software testing

    Directory of Open Access Journals (Sweden)

    Aziz Ahmad Rais

    2016-10-01

    Full Text Available Software quality is determined by assessing the characteristics that specify how it should work, which are verified through testing. If it were possible to touch, see, or measure software, it would be easier to analyze and prove its quality. Unfortunately, software is an intangible asset, which makes testing complex. This is especially true when software quality is not a question of particular functions that can be tested through a graphical user interface. The primary objective of software architecture is to design quality of software through modeling and visualization. There are many methods and standards that define how to control and manage quality. However, many IT software development projects still fail due to the difficulties involved in measuring, controlling, and managing software quality. Software quality failure factors are numerous. Examples include beginning to test software too late in the development process, or failing properly to understand, or design, the software architecture and the software component structure. The goal of this article is to provide an interface-based software testing technique that better measures software quality, automates software quality testing, encourages early testing, and increases the software’s overall testability

  20. Brain computer interfaces, a review.

    Science.gov (United States)

    Nicolas-Alonso, Luis Fernando; Gomez-Gil, Jaime

    2012-01-01

    A brain-computer interface (BCI) is a hardware and software communications system that permits cerebral activity alone to control computers or external devices. The immediate goal of BCI research is to provide communications capabilities to severely disabled people who are totally paralyzed or 'locked in' by neurological neuromuscular disorders, such as amyotrophic lateral sclerosis, brain stem stroke, or spinal cord injury. Here, we review the state-of-the-art of BCIs, looking at the different steps that form a standard BCI: signal acquisition, preprocessing or signal enhancement, feature extraction, classification and the control interface. We discuss their advantages, drawbacks, and latest advances, and we survey the numerous technologies reported in the scientific literature to design each step of a BCI. First, the review examines the neuroimaging modalities used in the signal acquisition step, each of which monitors a different functional brain activity such as electrical, magnetic or metabolic activity. Second, the review discusses different electrophysiological control signals that determine user intentions, which can be detected in brain activity. Third, the review includes some techniques used in the signal enhancement step to deal with the artifacts in the control signals and improve the performance. Fourth, the review studies some mathematic algorithms used in the feature extraction and classification steps which translate the information in the control signals into commands that operate a computer or other device. Finally, the review provides an overview of various BCI applications that control a range of devices.

  1. Brain Computer Interfaces, a Review

    Directory of Open Access Journals (Sweden)

    Luis Fernando Nicolas-Alonso

    2012-01-01

    Full Text Available A brain-computer interface (BCI is a hardware and software communications system that permits cerebral activity alone to control computers or external devices. The immediate goal of BCI research is to provide communications capabilities to severely disabled people who are totally paralyzed or ‘locked in’ by neurological neuromuscular disorders, such as amyotrophic lateral sclerosis, brain stem stroke, or spinal cord injury. Here, we review the state-of-the-art of BCIs, looking at the different steps that form a standard BCI: signal acquisition, preprocessing or signal enhancement, feature extraction, classification and the control interface. We discuss their advantages, drawbacks, and latest advances, and we survey the numerous technologies reported in the scientific literature to design each step of a BCI. First, the review examines the neuroimaging modalities used in the signal acquisition step, each of which monitors a different functional brain activity such as electrical, magnetic or metabolic activity. Second, the review discusses different electrophysiological control signals that determine user intentions, which can be detected in brain activity. Third, the review includes some techniques used in the signal enhancement step to deal with the artifacts in the control signals and improve the performance. Fourth, the review studies some mathematic algorithms used in the feature extraction and classification steps which translate the information in the control signals into commands that operate a computer or other device. Finally, the review provides an overview of various BCI applications that control a range of devices.

  2. A human activity approach to User Interfaces

    DEFF Research Database (Denmark)

    Bødker, Susanne

    1989-01-01

    How can we understand why a bank teller has different needs for a user interface than those of casual users of a machine teller, or why a graphic designer needs a different user interface than a secretary? This article presents a framework for the design of user interfaces that originates from...... the work situations in which computer-based artifacts are used: The framework deals with the role of the user interface in purposeful human work. Human activity theory is used in this analysis. The purpose of this article is to make the reader curious and hopefully open his or her eyes to a somewhat...... different way of thinking about the user interface. The article applies examples of real-life interfaces to support this process, but it does not include a systematic presentation of empirical results. I focus on the role of the computer application in use. Thus, it is necessary to consider human...

  3. Interactive displays natural human-interface technologies

    CERN Document Server

    Bhowmik, Achintya K

    2014-01-01

    One of the first books to provide an in-depth discussion of the technologies, applications and trends in the rapidly emerging field of interactive displays (touch, gesture & voice) The book will cover the technologies, applications and trends in the field of interactive displays, namely interfaces based on touch, gesture and voice and those using a combination of these technologies. The book will be split into 4 main parts with each being dedicated to a specific user interface. Part 1 ''Touch Interfaces'' will provide a review of the currently deployed touch-screen technologies and applications. It will also cover the recent developments towards achieving thinner, lightweight and cost-reduced touch screen panels in the future via integration of touch functionalities. Part 2 ''Gesture Interfaces'' will examine techniques and applications in stereoscopic 3D computer vision, structured-light 3D computer vision and time-of-flight 3D computer vision in gesture interfaces. Part 3 ''Voice Interfaces'' will revie...

  4. Interface stress in Au/Ni multilayers

    DEFF Research Database (Denmark)

    Schweitz, K.O.; Böttiger, J.; Chevallier, J.

    2000-01-01

    The effect of intermixing on the apparent interface stress is studied in -textured dc-magnetron sputtered Au/Ni multilayers by use of two methods commonly used for determining interface stress. The method using profilometry and in-plane x-ray diffraction does not take intermixing...... into account and yields an apparent interface stress of -8.46 +/- 0.99 J m(-2). However, observed discrepancies between model calculations and measured high-angle x-ray diffractograms indicate intermixing, and by use of the profilometry and sin(2) psi method the real interface stress value of -2.69 +/- 0.43 J...... to be inapplicable to interface stress determinations in systems exhibiting a modulation period-dependent stress-free lattice parameter. Finally, a deviation of the interface stress in the Au/Ni sample with the smallest modulation period as compared to specimens with larger bilayer lengths is observed...

  5. Engineering gestures for multimodal user interfaces

    OpenAIRE

    Echtler, Florian; Kammer, Dietrich; Vanacken, Davy; Hoste, Lode; Signer, Beat

    2014-01-01

    Despite increased presence of gestural and multimodal user interfaces in research as well as daily life, development of such systems still mostly relies on programming concepts which have emerged from classic WIMP user interfaces. This workshop proposes to explore the gap between attempts to formalize and structure development for multimodal interfaces in the research community on the one hand and the lack of adoption of these formal languages and frameworks by practitioners and other researc...

  6. Flexible feature interface for multimedia sources

    Science.gov (United States)

    Coffland, Douglas R [Livermore, CA

    2009-06-09

    A flexible feature interface for multimedia sources system that includes a single interface for the addition of features and functions to multimedia sources and for accessing those features and functions from remote hosts. The interface utilizes the export statement: export "C" D11Export void FunctionName(int argc, char ** argv,char * result, SecureSession *ctrl) or the binary equivalent of the export statement.

  7. Surfaces and interfaces of electronic materials

    CERN Document Server

    Brillson, Leonard J

    2012-01-01

    An advanced level textbook covering geometric, chemical, and electronic structure of electronic materials, and their applications to devices based on semiconductor surfaces, metal-semiconductor interfaces, and semiconductor heterojunctions. Starting with the fundamentals of electrical measurements on semiconductor interfaces, it then describes the importance of controlling macroscopic electrical properties by atomic-scale techniques. Subsequent chapters present the wide range of surface and interface techniques available to characterize electronic, optical, chemical, and structural propertie

  8. XML Interfaces to the Internet of Things

    OpenAIRE

    Pemberton, Steven

    2015-01-01

    htmlabstractThe internet of things is predicated on tiny, cheap, lower power computers being embedded in devices everywhere. However such tiny devices by definition have very little memory and computing power available to support user interfaces or extended servers, and so the user interface needs to be distributed over the network. This paper describes techniques using standard technologies based on XML for creating remote user interfaces for the Internet of Things

  9. SQL Generation for Natural Language Interface

    Directory of Open Access Journals (Sweden)

    László Kovács

    2009-05-01

    Full Text Available A hot issue in the area of database management is to provide a high level interface for nontechnical users. An important research direction is the application of natural language interface. The paperpresents an interface module that converts user’s query given in natural language into a corresponding SQL command. After clustering the input sentence, a pushdown automaton is used to verify the syntax. The corresponding SQL code is generated by a semantic matcher module.

  10. XML Interfaces to the Internet of Things

    OpenAIRE

    Pemberton, Steven; Foster, C.

    2015-01-01

    The internet of things is predicated on tiny, cheap, lower power computers being embedded in devices everywhere. However such tiny devices by definition have very little memory and computing power available to support user interfaces or extended servers, and so the user interface needs to be distributed over the network. This paper describes techniques using standard technologies based on XML for creating remote user interfaces for the Internet of Things

  11. Interface area transport of monodispersed spherical particulates

    Energy Technology Data Exchange (ETDEWEB)

    Chang, Chong H. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-08-05

    We present an interface area transport model required in tracking of mass, momentum, and energy exchange between dispersed and background materials. The basic transport equation has been rigorously derived from the volume fraction evolution equation. Interface area changes due to mass transport and local compression/expansion are included. The model is then simplified for the case in which the dispersed phase is composed of spheres of locally uniform size. A procedure for calculating advective flux with interface reconstruction has been suggested.

  12. Recent work on material interface reconstruction

    Energy Technology Data Exchange (ETDEWEB)

    Mosso, S.J.; Swartz, B.K. [Los Alamos National Lab., NM (United States)

    1997-12-31

    For the last 15 years, many Eulerian codes have relied on a series of piecewise linear interface reconstruction algorithms developed by David Youngs. In a typical Youngs` method, the material interfaces were reconstructed based upon nearly cell values of volume fractions of each material. The interfaces were locally represented by linear segments in two dimensions and by pieces of planes in three dimensions. The first step in such reconstruction was to locally approximate an interface normal. In Youngs` 3D method, a local gradient of a cell-volume-fraction function was estimated and taken to be the local interface normal. A linear interface was moved perpendicular to the now known normal until the mass behind it matched the material volume fraction for the cell in question. But for distorted or nonorthogonal meshes, the gradient normal estimate didn`t accurately match that of linear material interfaces. Moreover, curved material interfaces were also poorly represented. The authors will present some recent work in the computation of more accurate interface normals, without necessarily increasing stencil size. Their estimate of the normal is made using an iterative process that, given mass fractions for nearby cells of known but arbitrary variable density, converges in 3 or 4 passes in practice (and quadratically--like Newton`s method--in principle). The method reproduces a linear interface in both orthogonal and nonorthogonal meshes. The local linear approximation is generally 2nd-order accurate, with a 1st-order accurate normal for curved interfaces in both two and three dimensional polyhedral meshes. Recent work demonstrating the interface reconstruction for curved surfaces will /be discussed.

  13. Swimming near a deformable interface

    Science.gov (United States)

    Dias, Marcelo; Powers, Thomas

    2013-03-01

    It is a known fact that swimmers behave differently near deformable soft tissues than when near a rigid surface. Motivated by this class of problems, we investigate swimming microorganisms near flexible walls. We calculate the speed of a n infinitely long swimmer near an interface between two viscous fluids. Part of the calculation of the speed is the calculation of the shape of the free boundary. The swimming speed is controlled by the competition between surface and viscous effects, where two limits are observed. When the surface tension vanishes, we get Taylor's result for a swimmer with no walls. When the surface tension is infinite, the problem is like that of a swimmer near a rigid wall.

  14. [Pathology of the vitreomacular interface].

    Science.gov (United States)

    Pop, Monica; Gheorghe, Alina

    2014-01-01

    Vitreous role in the pathophysiology of retinal diseases has increased importantly over the recent years. This was possible using Optical Coherence Tomography which reviewed the way the vitreoretinal interface should be looked at and defined and classified new pathologies such as Vitreoretinal Traction Syndrome. Vitreous is not an empty space but an important anatomical structure with role in ocular physiology. With age biochemical changes occur so that vitreous starts to liquefy. Once the vitreous is liquefied (sinchisis) it collapses and passes in the retrohialoid space (sineresis). In complete PVD besides sinchisis there is a weakness of the adherence between the posterior cortex and ILM with total detachment of posterior cortex. Abnormal adhesions are associated with incomplete PVD. The definition and understanting of vitreoretinal pathology is an active and continuous process, PVD being the trigger of a lot of retinal pathologies: epiretinal membrane, macular hole, tractional macular oedema, VMTS, myopic traction maculopathy, exacerbations of exudative ARMD.

  15. Cooperative strings and glassy interfaces.

    Science.gov (United States)

    Salez, Thomas; Salez, Justin; Dalnoki-Veress, Kari; Raphaël, Elie; Forrest, James A

    2015-07-07

    We introduce a minimal theory of glass formation based on the ideas of molecular crowding and resultant string-like cooperative rearrangement, and address the effects of free interfaces. In the bulk case, we obtain a scaling expression for the number of particles taking part in cooperative strings, and we recover the Adam-Gibbs description of glassy dynamics. Then, by including thermal dilatation, the Vogel-Fulcher-Tammann relation is derived. Moreover, the random and string-like characters of the cooperative rearrangement allow us to predict a temperature-dependent expression for the cooperative length ξ of bulk relaxation. Finally, we explore the influence of sample boundaries when the system size becomes comparable to ξ. The theory is in agreement with measurements of the glass-transition temperature of thin polymer films, and allows quantification of the temperature-dependent thickness hm of the interfacial mobile layer.

  16. Electronic Interfacing with Living Cells

    Science.gov (United States)

    Fleming, James T.

    The direct interfacing of living cells with inorganic electronic materials, components or systems has led to the development of two broad categories of devices that can (1) transduce biochemical signals generated by biological components into electrical signals and (2) transduce electronically generated signals into biochemical signals. The first category of devices permits the monitoring of living cells, the second, enables control of cellular processes. This review will survey this exciting area with emphasis on the fundamental issues and obstacles faced by researchers. Devices and applications that use both prokaryotic (microbial) and eukaryotic (mammalian) cells will be covered. Individual devices described include microbial biofuel cells that produce electricity, bioelectrical reactors that enable electronic control of cellular metabolism, living cell biosensors for the detection of chemicals and devices that permit monitoring and control of mammalian physiology.

  17. Nanofluidics, from bulk to interfaces.

    Science.gov (United States)

    Bocquet, Lydéric; Charlaix, Elisabeth

    2010-03-01

    Nanofluidics has emerged recently in the footsteps of microfluidics, following the quest for scale reduction inherent to nanotechnologies. By definition, nanofluidics explores transport phenomena of fluids at nanometer scales. Why is the nanometer scale specific? What fluid properties are probed at nanometric scales? In other words, why does 'nanofluidics' deserve its own brand name? In this critical review, we will explore the vast manifold of length scales emerging for fluid behavior at the nanoscale, as well as the associated mechanisms and corresponding applications. We will in particular explore the interplay between bulk and interface phenomena. The limit of validity of the continuum approaches will be discussed, as well as the numerous surface induced effects occurring at these scales, from hydrodynamic slippage to the various electro-kinetic phenomena originating from the couplings between hydrodynamics and electrostatics. An enlightening analogy between ion transport in nanochannels and transport in doped semi-conductors will be discussed (156 references).

  18. On Building a Search Interface Discovery System

    Science.gov (United States)

    Shestakov, Denis

    A huge portion of the Web known as the deep Web is accessible via search interfaces to myriads of databases on the Web. While relatively good approaches for querying the contents of web databases have been recently proposed, one cannot fully utilize them having most search interfaces unlocated. Thus, the automatic recognition of search interfaces to online databases is crucial for any application accessing the deep Web. This paper describes the architecture of the I-Crawler, a system for finding and classifying search interfaces. The I-Crawler is intentionally designed to be used in the deep web characterization surveys and for constructing directories of deep web resources.

  19. A Theoretical Framework for Ecological Interface Design

    DEFF Research Database (Denmark)

    Vicente, Kim J.; Rasmussen, Jens

    1988-01-01

    A theoretical framework for designing interfaces for complex systems is de-scribed. The framework, called ecological interface design (EID), suggests a set of principles for designing interfaces in a way that supports the funda-mental properties of human cognition. The basis of EID is the skills...... of the task require. The EID approach extends the concept of direct manipulation inter-faces by taking into account the added complications introduced by complex systems. In this paper, we describe the development of the framework, its theoretical foundations, and examples of its application to various work...

  20. Polymer surfaces, interfaces and thin films

    Energy Technology Data Exchange (ETDEWEB)

    Stamm, M. [Max-Planck-Institut fuer Polymerforschung, Mainz (Germany)

    1996-11-01

    Neutron reflectometry can be used in various ways to investigate surfaces, interfaces and thin films of polymers. Its potential comes mostly from the possibilities offered by selective deuteration, where a particular component can be made visible with respect to its activity at the interface. In addition the depth resolution is much better than with most other direct techniques, and details of the profiles may be resolved. Several examples will be discussed including the segment diffusion at the interface between two polymer films, the determination of the narrow interfaces between incompatible polymer blends and the development of order in thin diblock copolymer films. (author) 10 figs., 2 tabs., 38 refs.

  1. Interfaces usuario máquina

    OpenAIRE

    Cervelló González, Rosa; Martínez García, Domènec; Ramírez Ramey, David; Virgili Llop, Joaquim

    2009-01-01

    Esta guía nos habla de las interfaces, que son los dispositivos de contacto entre un usuario y una máquina. El diseño de las interfaces incide activamente en el proceso de comunicación interactiva; así, es necesario profundizar en los aspectos cognitivos del ser humano, para definir modelos de interfaces adaptadas a las necesidades individuales y sociales, y al mismo tiempo, preparar a la sociedad para la adaptación a las nuevas interfaces que formarán parte de su entorno. En la era de la soc...

  2. Digital interface for high-resolution displays

    Science.gov (United States)

    Hermann, David J.; Gorenflo, Ronald L.

    1999-08-01

    Commercial display interfaces are currently transitioning from analog to digital. Although this transition is in the very early stages, the military needs to begin planning their own transition to digital. There are many problems with the analog interface in high-resolution display systems that are solved by changing to a digital interface. Also, display system cost can be lower with a digital interface to a high resolution display. Battelle is under contract with DARPA to develop an advanced Display Interface (ADI) to replace the analog RGB interfaces currently used in high definition workstation displays. The goal is to create a standard digital display interface for military applications that is based on emerging commercial standards. Support for military application- specific functionality is addressed, including display test and control. The main challenges to implementing a digital display interface are described, along with approaches to address the problems. Conceptual ADI architectures are described and contrasted. The current and emerging commercial standards for digital display interfaces are reviewed in detail. Finally, the tasks required to complete the ADI effort are outlined and described.

  3. NUMERICAL SIMULATION ON MULTI-FLUID INTERFACES

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Enhancement of two-fluid mixing was numericallystudied by tracking the multi-fluid interfaces. Level set equations were used to capture the interfaces, and flow field was obtained by upwind TVD scheme to solve 2D Eulerian equations. The boundary conditions at interface of two fluids are determined by Ghost fluid method (GFM). The distributions of fluid parameters, such as pressure and density, were got at different time steps.The results show that the method presented in this paper can track the density discontinuity perfectly. Superior to previous results, the density discontinuity remains sharper. Also, the mixing of fluids can be greatly enhanced by setting disturbances along the initial fluid interfaces.``

  4. Behavior of compacted clay-concrete interface

    Institute of Scientific and Technical Information of China (English)

    R.R. SHAKIR; Jungao ZHU

    2009-01-01

    Tests of interface between compacted clay and concrete were conducted systematically using interface simple shear test apparatus. The samples, having same dry density with different water content ratio, were prepared.Two types of concrete with different surface roughness, i.e., relatively smooth and relatively rough surface rough-ness, were also prepared. The main objectives of this paper are to show the effect of water content, normal stress and rough surface on the shear stress-shear displacement relationship of clay-concrete interface. The following were concluded in this study: 1) the interface shear sliding dominates the interface shear displacement behavior for both cases of relatively rough and smooth concrete surface except when the clay water content is greater than 16% for the case of rough concrete surface where the shear failure occurs in the body of the clay sample; 2) the results of interface shear strength obtained by direct shear test were different from that of simple shear test for the case of rough concrete surface; 3) two types of interface failure mechanism may change each other with different water content ratio; 4) the interface shear strength increases with increasing water content ratio especially for the case of clay-rough concrete surface interface.

  5. Formulations of a hydromechanical interface element

    Institute of Scientific and Technical Information of China (English)

    Zhong-Zhi Fu; Si-Hong Liu

    2011-01-01

    A hydromechanical interface element is proposed for the consideration of the hydraulic-mechanical coupling effect along the interface.The fully coupled governing equations and the relevant finite element formulations are derived in detail for the interface element.All the involved matrices are of the same form as those of a solid element,which makes the incorporation of the model into a finite element program straightforward.Three examples are then numerically simulated using the interface element.Reasonable results confirm the correctness of the proposed model and motivate its application in hydromechanical contact problems in the future.

  6. An interface energy density-based theory considering the coherent interface effect in nanomaterials

    Science.gov (United States)

    Yao, Yin; Chen, Shaohua; Fang, Daining

    2017-02-01

    To characterize the coherent interface effect conveniently and feasibly in nanomaterials, a continuum theory is proposed that is based on the concept of the interface free energy density, which is a dominant factor affecting the mechanical properties of the coherent interface in materials of all scales. The effect of the residual strain caused by self-relaxation and the lattice misfit of nanomaterials, as well as that due to the interface deformation induced by an external load on the interface free energy density is considered. In contrast to the existing theories, the stress discontinuity at the interface is characterized by the interface free energy density through an interface-induced traction. As a result, the interface elastic constant introduced in previous theories, which is not easy to determine precisely, is avoided in the present theory. Only the surface energy density of the bulk materials forming the interface, the relaxation parameter induced by surface relaxation, and the mismatch parameter for forming a coherent interface between the two surfaces are involved. All the related parameters are far easier to determine than the interface elastic constants. The effective bulk and shear moduli of a nanoparticle-reinforced nanocomposite are predicted using the proposed theory. Closed-form solutions are achieved, demonstrating the feasibility and convenience of the proposed model for predicting the interface effect in nanomaterials.

  7. Interface Everywhere: Further Development of a Gesture and Voice Commanding Interface Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Natural User Interface (NUI) is a term used to describe a number of technologies such as speech recognition, multi-touch, and kinetic interfaces. Gesture and voice...

  8. Report of the results of the fiscal 1997 regional consortium R and D project. Regional consortium energy field/R and D high performance flat panel display technology (first fiscal year); 1997 nendo chiiki consortium kenkyu kaihatsu jigyo. Chiiki consortium energy bun`ya / koseino flat panel display gijutsu no sogo kaihatsu kenkyu (daiichi nendo ) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    One of the subjects in technology supporting the highly information-oriented society which will develop and diversify toward the 21st century is the construction of high grade man/machine interface. For it, high precision/high luminance/energy saving/thin plane displays are strongly requested. This R and D is to indicate models of systematical development in the region of element technology individually existing in the Shikoku area by forming a regional consortium in the industry/universities/government. Creation of new industries by gathering display related enterprises is a first step in a plan to realize `Display Island Shikoku.` As a concrete target, with the use of high-tech diamond semiconducting technology, a development is conducted of the high performance flat panel display using the negative electron affinity (NEA) electron emitter which drastically solves the problems such as luminance, visibility angle and response speed, the subjects on the commercialized liquid crystal flat panel display. 16 refs., 45 figs., 8 tabs.

  9. Particles dispersion on fluid-liquid interfaces

    Institute of Scientific and Technical Information of China (English)

    Sathish Gurupatham; Bhavin Dalal; Md. Shahadat Hossain; Ian S. Fischer; Pushpendra Singh; Daniel D. Joseph

    2011-01-01

    This paper is concerned with the dispersion of particles on the fluid-liquid interface. In a previous study we have shown that when small particles,e.g.,flour,pollen,glass beads,etc.,contact an air-liquid interface,they disperse rapidly as ifthey were in an explosion. The rapid dispersion is due to the fact that the capillary force pulls particles into the interface causing them to accelerate to a large velocity. In this paper we show that motion of particles normal to the interface is inertia dominated: they oscillate vertically about their equilibrium position before coming to rest under viscous drag. This vertical motion of a particle causes a radially-outward lateral (secondary) flow on the interface that causes nearby particles to move away. The dispersion on a liquid-liquid interface,which is the primary focus of this study,was relatively weaker than on an air-liquid interface,and occurred over a longer period of time. When falling through an upper liquid the particles have a slower velocity than when falling through air because the liquid has a greater viscosity. Another difference for the liquid-liquid interface is that the separation of particles begins in the upper liquid before the particles reach the interface. The rate of dispersion depended on the size of the particles,the densities of the particle and liquids,the viscosities of the liquids involved,and the contact angle. For small particles,partial pinning and hysteresis of the three-phase contact line on the surface of the particle during adsorption on liquid-liquid interfaces was also important. The frequency of oscillation of particles about their floating equilibrium increased with decreasing particle size on both air-water and liquid-liquid interfaces,and the time to reach equilibrium decreased with decreasing particle size. These results are in agreement with our analysis.

  10. INTERFACE STRUCTURE AND SCHOTTKY BARRIERS AT EPITAXIAL SI(111)/PB INTERFACES

    NARCIS (Netherlands)

    WEITERING, HH; HIBMA, T; HESLINGA, DR; KLAPWIJK, TM

    1991-01-01

    Two different epitaxial Si(111)/Pb interfaces can be prepared, i.e. a metastable interface with a (7 x 7) and a stable interface with an incommensurate but close to (square-root 3 x square-root 3)R30-degrees surface unit cell. Schottky barrier heights of diodes made by depositing thick Pb layers on

  11. Modeling the electrified solid-liquid interface

    DEFF Research Database (Denmark)

    Rossmeisl, Jan; Skulason, Egill; Björketun, Mårten;

    2008-01-01

    A detailed atomistic model based on density functional theory calculations is presented of the charged solid-electrolyte interface. Having protons solvated in a water bilayer outside a Pt(111) slab with excess electrons, we show how the interface capacitance is well described and how the work...

  12. X-ray scattering from liquid interfaces

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Synchrotron radiation X-ray scattering is a useful tool for structural characterization of liquid interfaces.Specular refiectivity provides precise measurement of the interfacial widths and of the ordering of surfactants adsorbed to these interfaces. Diffuse scattering gives information on phase transitions and domain formation in surfactant monolayers and on interfacial fluctuations confined by and coupled across fluidic films.

  13. Electrochemistry at Liquid-Lidid Interfaces

    OpenAIRE

    Gulaboski, Rubin

    2012-01-01

    Liquid-liquid interface is a natural border separating two solutions with different features. In this lecture, the phenomena of ion transfer at the Liquid-Liquid interfaces are elaborated, while hints are given to determine the themrodynamic and kinetic parameters relevant to the ion transfer processes.

  14. IVOA Support Interfaces Version 1.0

    Science.gov (United States)

    Graham, Matthew; Rixon, Guy; Grid andWeb Services Working Group; Graham, Matthew; Rixon, Guy

    2011-05-01

    This document describes the minimum interface that a (SOAP- or REST-based) web service requires to participate in the IVOA. Note that this is not required of standard VO services developed prior to this specification, although uptake is strongly encouraged on any subsequent revision. All new standard VO services, however, must feature a VOSI-compliant interface.

  15. Advanced Stellar Compass, CHAMP, Interface Control Document

    DEFF Research Database (Denmark)

    Madsen, Peter Buch; Jørgensen, John Leif; Betto, Maurizio;

    1999-01-01

    The German government research establishment "GeoForschungsZentrum" developed under a contract to the German government a microsatellite named "Champ". The Space Instrumentation Group has made a Interface Control Document for the CHAMP, witch describes the Star Imager, the electrical interface, t...

  16. A Smart Material Interfaces Learning Experience

    NARCIS (Netherlands)

    Minuto, A.; Pittarello, Fabio; Nijholt, Antinus

    2015-01-01

    This paper describes a learning experience held with a class of primary school children who were introduced to a novel class of resources, named smart materials, and the interfaces built with them (Smart Material Interfaces). The pupils were guided along a multidisciplinary educational path in which

  17. Graphics-System Color-Code Interface

    Science.gov (United States)

    Tulppo, J. S.

    1982-01-01

    Circuit originally developed for a flight simulator interfaces a computer graphics system with color monitor. Subsystem is intended for particular display computer (AGT-130, ADAGE Graphics Terminal) and specific color monitor (beam penetration tube--Penetron). Store-and-transmit channel is one of five in graphics/color-monitor interface. Adding 5-bit color code to existing graphics programs requires minimal programing effort.

  18. Utilizing Bayesian Techniques for User Interface Intelligence

    Science.gov (United States)

    1996-12-01

    rea - soning and knowledge) have placed little or no emphasis on the expert system user interface. These developers spend most resources perfecting the...1994). 24. Cesta, Amedeo and Daniela DAloisi. "Building Interfaces as Personal Assis- tants," SIGCHI Bulletin, 28(3):108-113 (1996). 25. Chappel, H

  19. Gender Interest Differences with Multimedia Learning Interfaces.

    Science.gov (United States)

    Passig, David; Levin, Haya

    1999-01-01

    This study of 90 kindergarten children examined gender differences in learning interest from different designs of multimedia interfaces. Results indicate a significant difference between boys and girls in the influence of the design of interactive multimedia stories on time on task and on level of satisfaction with the interfaces. (Author/LRW)

  20. User Interface Design For Dynamic Geometry Software

    Directory of Open Access Journals (Sweden)

    Ulrich Kortenkamp

    2010-06-01

    Full Text Available In this article we describe long-standing user interface issues with Dynamic Geometry Software and common approaches to address them. We describe first prototypes of multi-touch-capable DGS. We also give some hints on the educational benefits of proper user interface design.

  1. Study of Behavior of Sterols at Interfaces

    Science.gov (United States)

    Klein, P. D.; Knight, J. C.; Szczepanik, P. A.

    1968-01-01

    Behavior of sterols and sterol acetates on various types of interfaces indicates that the function of a sterol depends upon a surface orientation and surface energy of the interface. Column-chromatographic techniques determine the retention volume of various sterols under standard conditions.

  2. A Systems Design Course Emphasizing Interfaces

    DEFF Research Database (Denmark)

    Staunstrup, Jørgen

    1997-01-01

    This paper describes an experimental course where students develop a (small) system focusing on the interfaces between different components of the system. The components are developed independently of each other using web based documentation and focusing on techniques for modeling and analysis...... of interfaces. These techniques are supported by prototype tools...

  3. User Interface Design for Dynamic Geometry Software

    Science.gov (United States)

    Kortenkamp, Ulrich; Dohrmann, Christian

    2010-01-01

    In this article we describe long-standing user interface issues with Dynamic Geometry Software and common approaches to address them. We describe first prototypes of multi-touch-capable DGS. We also give some hints on the educational benefits of proper user interface design.

  4. Bubble Formation in Silicon-Quartz Interface

    OpenAIRE

    Kakimoto, K.; EGUCHI, M.; Ozoe, H.

    1997-01-01

    Bubble formation at an interface between silicon melt and a quartz crucible was studied by thermodynamical calculation and visualization of bubble formation using X-ray radiography. A phase diagram of silicon-oxygen (Si-O) system is also calculated from the reported thermodynamical data. Critical temperature and radius of bubble formation at the interface was discussed.

  5. Model driven development of user interface prototypes

    DEFF Research Database (Denmark)

    Störrle, Harald

    2010-01-01

    Many approaches to interface development apply only to isolated aspects of the development of user interfaces (UIs), e.g., exploration during the early phases, design of visual appearance, or implementation in some technology. In this paper we explore an _integrated_ approach to incorporate the w...

  6. Hypertext Interface Design and Structural Knowledge Acquisition.

    Science.gov (United States)

    Koneman, Philip A.; Jonassen, David H.

    Hypertext is well-suited for educational applications where open learning and knowledge exploration is desired. In such applications, principles of good hypertext interface design should be employed to avoid navigational problems so as to maximize learning. Interface design, however, may also directly enhance acquisition of a particular knowledge…

  7. Colloids at liquid interfaces: dynamics and organization

    NARCIS (Netherlands)

    Ershov, D.S.

    2014-01-01

      This thesis deals with spherical microparticles trapped at liquid interfaces. It focuses on two aspects of their behavior: firstly, the effect of the curvature of a liquid interface on interparticle interactions and their organization; secondly, the mobility of particles at visco-elastic int

  8. An Architectural Experience for Interface Design

    Science.gov (United States)

    Gong, Susan P.

    2016-01-01

    The problem of human-computer interface design was brought to the foreground with the emergence of the personal computer, the increasing complexity of electronic systems, and the need to accommodate the human operator in these systems. With each new technological generation discovering the interface design problems of its own technologies, initial…

  9. XML Interfaces to the Internet of Things

    NARCIS (Netherlands)

    S. Pemberton (Steven)

    2015-01-01

    htmlabstractThe internet of things is predicated on tiny, cheap, lower power computers being embedded in devices everywhere. However such tiny devices by definition have very little memory and computing power available to support user interfaces or extended servers, and so the user interface needs t

  10. Interfacing superconducting qubits and single optical photons

    NARCIS (Netherlands)

    Das, Sumanta; Faez, Sanli; Sørensen, Anders S.

    2016-01-01

    We propose an efficient light-matter interface at optical frequencies between a superconducting qubit and a single photon. The desired interface is based on a hybrid architecture composed of an organic molecule embedded inside an optical waveguide and electrically coupled to a superconducting qubit

  11. Gestures in an Intelligent User Interface

    NARCIS (Netherlands)

    Fikkert, F.W.; van der Vet, P.E.; Nijholt, Antinus; Shao, Ling; Shan, Caifeng; Luo, Jiebo; Etoh, Minoru

    2010-01-01

    In this chapter we investigated which hand gestures are intuitive to control a large display multimedia interface from a user’s perspective. Over the course of two sequential user evaluations we defined a simple gesture set that allows users to fully control a large display multimedia interface,

  12. Core-shell particles at fluid interfaces

    NARCIS (Netherlands)

    Buchcic, C.

    2016-01-01

    There is a growing interest in the use of particles as stabilizers for foams and emulsions. Applying hard particles for stabilization of fluid interface is referred to as Pickering stabilization. By using hard particles instead of surfactants and polymers, fluid interfaces can be effectively stabili

  13. XML Interfaces to the Internet of Things

    NARCIS (Netherlands)

    S. Pemberton (Steven); C Foster

    2015-01-01

    htmlabstractThe internet of things is predicated on tiny, cheap, lower power computers being embedded in devices everywhere. However such tiny devices by definition have very little memory and computing power available to support user interfaces or extended servers, and so the user interface

  14. XML Interfaces to the Internet of Things

    NARCIS (Netherlands)

    Pemberton, S.; Foster, C

    2015-01-01

    The internet of things is predicated on tiny, cheap, lower power computers being embedded in devices everywhere. However such tiny devices by definition have very little memory and computing power available to support user interfaces or extended servers, and so the user interface needs to be distrib

  15. Graphic Interface for LCP2 Optimization Program

    DEFF Research Database (Denmark)

    Nicolae, Taropa Laurentiu; Gaunholt, Hans

    1998-01-01

    This report provides information about the software interface that is programmed for the Optimization Program LCP2. The first part is about the general description of the program followed by a guide for using the interface. The last chapters contain a discussion about problems or futute extension...

  16. Energy-Efficient Capacitive-Sensor Interfaces

    NARCIS (Netherlands)

    Tan, Z.

    2013-01-01

    This thesis describes the theory, design and realization of energy-efficient capacitive-sensor interfaces that are dedicated to energy-constrained applications. The goal of this work is to explore energy-efficient capacitive-sensor interface design techniques both at the system and the circuit level

  17. A diffuse interface model with immiscibility preservation

    Energy Technology Data Exchange (ETDEWEB)

    Tiwari, Arpit, E-mail: atiwari2@illinois.edu [Department of Mechanical Science and Engineering, University of Illinois at Urbana-Champaign, Urbana, IL 61801 (United States); Freund, Jonathan B., E-mail: jbfreund@illinois.edu [Department of Mechanical Science and Engineering, University of Illinois at Urbana-Champaign, Urbana, IL 61801 (United States); Department of Aerospace Engineering, University of Illinois at Urbana-Champaign, Urbana, IL 61801 (United States); Pantano, Carlos [Department of Mechanical Science and Engineering, University of Illinois at Urbana-Champaign, Urbana, IL 61801 (United States)

    2013-11-01

    A new, simple, and computationally efficient interface capturing scheme based on a diffuse interface approach is presented for simulation of compressible multiphase flows. Multi-fluid interfaces are represented using field variables (interface functions) with associated transport equations that are augmented, with respect to an established formulation, to enforce a selected interface thickness. The resulting interface region can be set just thick enough to be resolved by the underlying mesh and numerical method, yet thin enough to provide an efficient model for dynamics of well-resolved scales. A key advance in the present method is that the interface regularization is asymptotically compatible with the thermodynamic mixture laws of the mixture model upon which it is constructed. It incorporates first-order pressure and velocity non-equilibrium effects while preserving interface conditions for equilibrium flows, even within the thin diffused mixture region. We first quantify the improved convergence of this formulation in some widely used one-dimensional configurations, then show that it enables fundamentally better simulations of bubble dynamics. Demonstrations include both a spherical-bubble collapse, which is shown to maintain excellent symmetry despite the Cartesian mesh, and a jetting bubble collapse adjacent a wall. Comparisons show that without the new formulation the jet is suppressed by numerical diffusion leading to qualitatively incorrect results.

  18. Core-shell particles at fluid interfaces

    NARCIS (Netherlands)

    Buchcic, C.

    2016-01-01

    There is a growing interest in the use of particles as stabilizers for foams and emulsions. Applying hard particles for stabilization of fluid interface is referred to as Pickering stabilization. By using hard particles instead of surfactants and polymers, fluid interfaces can be effectively

  19. Interface discrete light bullets in waveguide arrays.

    Science.gov (United States)

    Mihalache, Dumitru; Mazilu, Dumitru; Lederer, Falk; Kivshar, Yuri S

    2007-08-01

    We analyze spatiotemporal light localization at the interface separating two different periodic photonic lattices. We demonstrate the existence of a novel class of continuous-discrete spatiotemporal solitons propagating along the interface, including hybrid staggered-unstaggered discrete light bullets with tails belonging to spectral gaps of different types.

  20. Physical chemistry of semiconductor-liquid interfaces

    Energy Technology Data Exchange (ETDEWEB)

    Nozik, A.J. [National Renewable Energy Lab., Golden, CO (United States); Memming, R. [Institut fuer Solarenergie-forschung GmbH, Hannover (Germany)

    1996-08-01

    The science describing semiconductor-liquid interfaces is highly interdisciplinary, broad in scope, interesting, and of importance to various emerging technologies. We present a review of the basic physicochemical principles of semiconductor-liquid interfaces, including their historical development, and describe the major technological applications that are based on these scientific principles. 205 refs., 27 figs., 1 tab.

  1. Interface failure by cavity growth to coalescence

    DEFF Research Database (Denmark)

    Tvergaard, Viggo

    2000-01-01

    For a thin metal layer between ceramics ductile failure by the growth of voids along one of the interfaces is studied numerically. An axisymmetric cell model is used to represent an array of uniformly distributed hemispherical interface voids. The bonding to the ceramics gives rise to highly...

  2. Coded Schemes for Asymmetric Wireless Interfaces

    DEFF Research Database (Denmark)

    Moreira, André; Roetter, Daniel Enrique Lucani

    2015-01-01

    system with full duplex interfaces. Our second goal is to understand the practical implications of these results by designing a protocol for file transmissions, implement it in Android smart phones, and measure its performance when combining various interfaces, including, Bluetooth, WiFi, and 3G cellular...

  3. An Architectural Experience for Interface Design

    Science.gov (United States)

    Gong, Susan P.

    2016-01-01

    The problem of human-computer interface design was brought to the foreground with the emergence of the personal computer, the increasing complexity of electronic systems, and the need to accommodate the human operator in these systems. With each new technological generation discovering the interface design problems of its own technologies, initial…

  4. The Green Bank Telescope: User Interfaces

    Science.gov (United States)

    Maddalena, R. J.; Fisher, J. R.

    1999-12-01

    The NRAO-Green Bank Telescope is composed of a unique, versatile, and complex suite of instrumentation. Observers and staff members will require intuitive user interfaces that can exploit the full capabilities of the instrument. The object-oriented monitor and control system which underlies all of the GBT user interfaces provides a uniform software interface to each GBT device, from receivers to detectors. The control system allows the creation of high-level user interfaces in a wide range of programming languages with less effort than normally encountered in the creation of such interfaces. We will present at least two of the graphical user interfaces astronomers will encounter when observing with the GBT. One interface, written in Glish/Tk, is designed for astronomers and used for specifying observations. A demonstration will be given of another interface, written in Tcl/Tk, designed for the monitoring and debugging of telescope component and which will be used predominantly by telescope operators, engineers, and other staff members. The National Radio Astronomy Observatory is a facility of the National Science Foundation, operated under cooperative agreement by Associated Universities, Inc.

  5. Gestures in an Intelligent User Interface

    NARCIS (Netherlands)

    Fikkert, Wim; Vet, van der Paul; Nijholt, Anton; Shao, Ling; Shan, Caifeng; Luo, Jiebo; Etoh, Minoru

    2010-01-01

    In this chapter we investigated which hand gestures are intuitive to control a large display multimedia interface from a user’s perspective. Over the course of two sequential user evaluations we defined a simple gesture set that allows users to fully control a large display multimedia interface, int

  6. Interfaces - Weak Links, Yet Great Opportunities

    Science.gov (United States)

    Hendricks, Robert C.; Dimofte, Florin; Chupp, Raymond E.; Steinetz, Bruce M.

    2011-01-01

    Inadequate turbomachine interface design can rapidly degrade system performance, yet provide great opportunity for improvements. Engineered coatings of seals and bearing interfaces are major issues in the operational life of power systems. Coatings, films, and combined use of both metals and ceramics play a major role in maintaining component life. Interface coatings, like lubricants, are sacrificial for the benefit of the component. Bearing and sealing surfaces are routinely protected by tribologically paired coatings such as silicon diamond like coatings (SiDLC) in combination with an oil lubricated wave bearing that prolongs bearing operational life. Likewise, of several methods used or researched for detecting interface failures, dopants within coatings show failures in functionally graded ceramic coatings. The Bozzolo-Ferrante-Smith (BFS) materials models and quantum mechanical tools, employed in interface design, are discussed.

  7. Defining Interactions and Interfaces in Engineering Design

    DEFF Research Database (Denmark)

    Parslov, Jakob Filippson

    This PhD thesis focuses on the understanding and definition of interactions and interfaces during the architectural decomposition of complex, multi-technological products. The Interaction and Interface Framework developed in this PhD project contribute to the field of engineering design research......’ across any engineering discipline for describing and communicating about interactions and interfaces in engineering design. The framework contains classifications of three key terms; interaction, interaction mechanism, and interface. Due to the first principles, physics-­based approach to deriving...... of a product. The framework further proposes an 8-­step architecting approach explicitly articulating how to systematically apply the framework top-­‐down thus enabling complete and unambiguous descriptions of interactions and interfaces throughout the system. A tool called an Interaction Specification Wheel...

  8. Integrating interface slicing into software engineering processes

    Science.gov (United States)

    Beck, Jon

    1993-01-01

    Interface slicing is a tool which was developed to facilitate software engineering. As previously presented, it was described in terms of its techniques and mechanisms. The integration of interface slicing into specific software engineering activities is considered by discussing a number of potential applications of interface slicing. The applications discussed specifically address the problems, issues, or concerns raised in a previous project. Because a complete interface slicer is still under development, these applications must be phrased in future tenses. Nonetheless, the interface slicing techniques which were presented can be implemented using current compiler and static analysis technology. Whether implemented as a standalone tool or as a module in an integrated development or reverse engineering environment, they require analysis no more complex than that required for current system development environments. By contrast, conventional slicing is a methodology which, while showing much promise and intuitive appeal, has yet to be fully implemented in a production language environment despite 12 years of development.

  9. [Interfaces in outpatient and inpatient rheumatological treatment].

    Science.gov (United States)

    Edelmann, E

    2014-08-01

    In healthcare the term interface describes the communication and the sharing of responsibilities between different aspects of medical care und the different professional groups in medicine. It enables cooperation without conflicts and can contribute to an improvement of healthcare and reduce healthcare costs. The postgraduate professional education, medical guidelines and therapy recommendations are an important basis for the definition of interfaces. The definition of such an interface between different healthcare groups is essential for the implementation of selective contracts with health insurance companies. An appropriate health care interface between general practitioners and rheumatologists has been defined as well as between hospital and ambulant rheumatology treatment. The division of responsibilities between orthopedists and rheumatologists is still under discussion. A proposal for such an interface from the point of view of rheumatology is presented.

  10. Molecular dynamics of interface rupture

    Science.gov (United States)

    Koplik, Joel; Banavar, Jayanth R.

    1993-01-01

    Several situations have been studied in which a fluid-vapor or fluid-fluid interface ruptures, using molecular dynamics simulations of 3000 to 20,000 Lennard-Jones molecules in three dimensions. The cases studied are the Rayleigh instability of a liquid thread, the burst of a liquid drop immersed in a second liquid undergoing shear, and the rupture of a liquid sheet in an extensional flow. The late stages of the rupture process involve the gradual withdrawal of molecules from a thinning neck, or the appearance and growth of holes in a sheet. In all cases, it is found that despite the small size of the systems studied, tens of angstroms, the dynamics is in at least qualitative accord with the behavior expected from continuum calculations, and in some cases the agreement is to within tens of percent. Remarkably, this agreement occurs even though the Eulerian velocity and stress fields are essentially unmeasurable - dominated by thermal noise. The limitations and prospects for such molecular simulation techniques are assessed.

  11. Ferroelectric Graphene-Perovskite Interfaces.

    Science.gov (United States)

    Volonakis, George; Giustino, Feliciano

    2015-07-02

    Owing to their record-breaking energy conversion efficiencies, hybrid organometallic perovskites have emerged as the most promising light absorbers and ambipolar carrier transporters for solution-processable solar cells. Simultaneously, due to its exceptional electron mobility, graphene represents a prominent candidate for replacing transparent conducting oxides. Thus, it is possible that combining these wonder materials may propel the efficiency toward the Schokley-Queisser limit. Here, using first-principles calculations on graphene-CH3NH3PbI3 interfaces, we find that graphene suppresses the octahedral tilt in the very first perovskite monolayer, leading to a nanoscale ferroelectric distortion with a permanent polarization of 3 mC/m(2). This interfacial ferroelectricity drives electron extraction from the perovskite and hinders electron-hole recombination by keeping the electrons and holes separated. The interfacial ferroelectricity identified here simply results from the interplay between graphene's planar structure and CH3NH3PbI3's octahedral connectivity; therefore, this mechanism may be effective in a much broader class of perovskites, with potential applications in photovoltaics and photocatalysis.

  12. Chapter 21: Programmatic Interfaces - STILTS

    Science.gov (United States)

    Fitzpatrick, M. J.

    STILTS is the Starlink Tables Infrastructure Library Tool Set developed by Mark Taylor of the former Starlink Project. STILTS is a command-line tool (see the NVOSS_HOME/bin/stilts command) providing access to the same functionality driving the TOPCAT application and can be run using either the STILTS-specific jar file, or the more general TOPCAT jar file (both are available in the NVOSS_HOME/java/lib directory and are included in the default software environment classpath). The heart of both STILTS and TOPCAT is the STIL Java library. STIL is designed to efficiently handle the input, output and processing of very large tabular datasets and the STILTS task interface makes it an ideal tool for the scripting environment. Multiple formats are supported (including FITS Binary Tables, VOTable, CSV, SQL databases and ASCII, amongst others) and while some tools will generically handle all supported formats, others are specific to the VOTable format. Converting a VOTable to a more script-friendly format is the first thing most users will encounter, but there are many other useful tools as well.

  13. Molecular dynamics of interface rupture

    Science.gov (United States)

    Koplik, Joel; Banavar, Jayanth R.

    1993-01-01

    Several situations have been studied in which a fluid-vapor or fluid-fluid interface ruptures, using molecular dynamics simulations of 3000 to 20,000 Lennard-Jones molecules in three dimensions. The cases studied are the Rayleigh instability of a liquid thread, the burst of a liquid drop immersed in a second liquid undergoing shear, and the rupture of a liquid sheet in an extensional flow. The late stages of the rupture process involve the gradual withdrawal of molecules from a thinning neck, or the appearance and growth of holes in a sheet. In all cases, it is found that despite the small size of the systems studied, tens of angstroms, the dynamics is in at least qualitative accord with the behavior expected from continuum calculations, and in some cases the agreement is to within tens of percent. Remarkably, this agreement occurs even though the Eulerian velocity and stress fields are essentially unmeasurable - dominated by thermal noise. The limitations and prospects for such molecular simulation techniques are assessed.

  14. Thermal coupling at aqueous and biomolecular interfaces

    Science.gov (United States)

    Shenogina, Natalia B.

    Heat flow in the materials with nanoscopic features is dominated by thermal properties of the interfaces. While thermal properties of the solid-solid and solid-liquid interfaces are well studied, research of the thermal transport properties across soft (liquid-liquid) interfaces is very limited. Such interfaces are, however, plentiful in biological systems. In such systems the temperature control is of a great importance, because biochemical reactions, conformation of biomolecules as well as processes in biological cells and membranes have strong temperature sensitivity. The critical ingredient to temperature control in biological systems is the understanding of heat flow and thermal coupling across soft interfaces. To investigate heat transfer across biological and aqueous interfaces we chose to study a number of soft interfacial systems by means of molecular dynamic simulations. One of the interfaces under our investigation is the interface between protein (specifically green fluorescent protein) and water. Using this model we concentrated on the importance of vibrational frequency on coupling between water and proteins, and on significant differences between the roles of low and high frequency vibrations. Our thermal interfacial analysis allowed us to shed new light on to the issue of protein to water slaving, i.e., the concept of water controlling protein dynamics. Considering that the surface of the protein is composed of a complicated mixture of the hydrophobic and hydrophilic domains, to systematically explore the role of interfacial interactions we studied less complicated models with homogenous interfaces whith interfacial chemistry that could be changed in a controlled manner. We demonstrated that thermal transport measurements can be used to probe interfacial environments and to quantify interfacial bonding strength. Such ability provides a unique opportunity to characterize a variety of interfaces, which can be difficult to achieve with more direct

  15. Thermal transport across metal silicide-silicon interfaces: An experimental comparison between epitaxial and nonepitaxial interfaces

    Science.gov (United States)

    Ye, Ning; Feser, Joseph P.; Sadasivam, Sridhar; Fisher, Timothy S.; Wang, Tianshi; Ni, Chaoying; Janotti, Anderson

    2017-02-01

    Silicides are used extensively in nano- and microdevices due to their low electrical resistivity, low contact resistance to silicon, and their process compatibility. In this work, the thermal interface conductance of TiSi2, CoSi2, NiSi, and PtSi are studied using time-domain thermoreflectance. Exploiting the fact that most silicides formed on Si(111) substrates grow epitaxially, while most silicides on Si(100) do not, we study the effect of epitaxy, and show that for a wide variety of interfaces there is no dependence of interface conductance on the detailed structure of the interface. In particular, there is no difference in the thermal interface conductance between epitaxial and nonepitaxial silicide/silicon interfaces, nor between epitaxial interfaces with different interface orientations. While these silicide-based interfaces yield the highest reported interface conductances of any known interface with silicon, none of the interfaces studied are found to operate close to the phonon radiation limit, indicating that phonon transmission coefficients are nonunity in all cases and yet remain insensitive to interfacial structure. In the case of CoSi2, a comparison is made with detailed computational models using (1) full-dispersion diffuse mismatch modeling (DMM) including the effect of near-interfacial strain, and (2) an atomistic Green' function (AGF) approach that integrates near-interface changes in the interatomic force constants obtained through density functional perturbation theory. Above 100 K, the AGF approach significantly underpredicts interface conductance suggesting that energy transport does not occur purely by coherent transmission of phonons, even for epitaxial interfaces. The full-dispersion DMM closely predicts the experimentally observed interface conductances for CoSi2, NiSi, and TiSi2 interfaces, while it remains an open question whether inelastic scattering, cross-interfacial electron-phonon coupling, or other mechanisms could also account for

  16. Emergent Phenomena at Oxide Interfaces

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, H.Y.

    2012-02-16

    spin operator changes sign with T-operation. (iii) Gauge symmetry (G), which is associated with a change in the phase of the wave-function as {Psi} {yields} e{sup i{theta}}{Psi}. Gauge symmetry is connected to the law of charge conservation, and broken G-symmetry corresponds to superconductivity/superfluidity. To summarize, the interplay among these electronic degrees of freedom produces various forms of symmetry breaking patterns of I, T, and G, leading to novel emergent phenomena, which can appear only by the collective behavior of electrons and cannot be expected from individual electrons. Figure 1 shows this schematically by means of several representative phenomena. From this viewpoint, the interfaces of TMOs offer a unique and important laboratory because I is already broken by the structure itself, and the detailed form of broken I-symmetry can often be designed. Also, two-dimensionality usually enhances the effects of electron correlations by reducing their kinetic energy. These two features of oxide interfaces produce many novel effects and functions that cannot be attained in bulk form. Given that the electromagnetic responses are a major source of the physical properties of solids, and new gauge structures often appear in correlated electronic systems, we put 'emergent electromagnetism' at the center of Fig. 1.

  17. Apple cuticle: the perfect interface

    Science.gov (United States)

    Curry, Eric; Arey, Bruce

    2010-06-01

    The domestic apple might well be called an 'extreme' fruit. In the arid Northwest United States, the fruit often tolerates surface temperatures ranging from -2 °C in the early spring to 50 °C in the heat of summer, and again to -2 °C during controlled postharvest storage for up to 12 months. During its 18-month existence, the apple maintains a cuticle that is dynamic and environmentally responsive to protect against 1) cellular water loss during desiccation stress and 2) excessive uptake of standing surface moisture. Physiological disorders of the peel such as russeting, cracking, splitting, flecking and lenticel marking, develop as epidermal cells respond to rapid changes in ambient conditions at specific developmental stages during the growing season. Resultant market losses underlie research investigating the nature of apple cuticle growth and development. Ultrastructural analysis of the pro-cuticle using scanning electron microscopy indicates an overlapping network of lipid-based distally-elongating microtubules--produced by and connected to epidermal cells--which co-polymerize to form an organic solvent-insoluble semi-permeable cutin matrix. Microtubule elongation, aggregation, and polymerization function together as long as the fruit continues to enlarge. The nature of lipid transport from the epidermal cells through the cell wall to become part of the cuticular matrix was explored using an FEI Helios NanoLabTM DualBeamTM focused ion beam/scanning electron microscope on chemically- and cryo-fixed peel tissue from mature or freshly harvested apples. Based on microtubule dimensions, regular projections found at the cell/cuticle interface suggest an array of microtubule-like structures associated with the epidermal cell.

  18. High Integrity Can Design Interfaces

    Energy Technology Data Exchange (ETDEWEB)

    Shaber, E.L.

    1998-08-01

    The National Spent Nuclear Fuel Program is chartered with facilitating the disposition of DOE-owned spent nuclear fuel to allow disposal at a geologic repository. This is done through coordination with the repository program and by assisting DOE Site owners of SNF with needed information, standardized requirements, packaging approaches, etc. The High Integrity Can (HIC) will be manufactured to provide a substitute or barrier enhancement for normal fuel geometry and cladding. The can would be nested inside the DOE standardized canister which is designed to interface with the repository waste package. The HIC approach may provide the following benefits over typical canning approaches for DOE SNF. (a) It allows ready calculation and management of criticality issues for miscellaneous. (b) It segments and further isolates damaged or otherwise problem materials from normal SNF in the repository package. (c) It provides a very long term corrosion barrier. (d) It provides an extra internal pressure barrier for particulates, gaseous fission products, hydrogen, and water vapor. (e) It delays any potential release of fission products to the repository environment. (f) It maintains an additional level of fuel geometry control during design basis accidents, rock-fall, and seismic events. (g) When seal welded, it could provide the additional containment required for shipments involving plutonium content in excess of 20 Ci. (10 CFR 71.63.b) if integrated with an appropriate cask design. Long term corrosion protection is central to the HIC concept. The material selected for the HIC (Hastelloy C-22) has undergone extensive testing for repository service. The most severe theoretical interactions between iron, repository water containing chlorides and other repository construction materials have been tested. These expected chemical species have not been shown capable of corroding the selected HIC material. Therefore, the HIC should provide a significant barrier to DOE SNF dispersal

  19. Innovative interfaces for Serious Games

    Directory of Open Access Journals (Sweden)

    J. Marco

    2015-11-01

    Full Text Available The tangible interaction approach has, in recent years, become a promising alternative to tactile interaction for very young children. Children playing with Tangible User Interfaces (TUI are motivated by the novel and digital environment and benefit from the same values as conventional physical playing. Young children build their mental image of the world through action and motor responses and, with physical handling, they become conscious of reality. Within TUIs, digitally augmented surfaces (interactive blackboards and tabletops are becoming popular in educative environments. Tabletop devices are horizontal surfaces capable of supporting interaction and image feedback on their surface, and are especially interesting for reinforcing face-to-face social relations and group activities. However, most of current children-oriented applications for tabletops are based on tactile interaction, thus losing the benefits of physical playing. The paper describes our experiences building tangible tabletops, and designing tangible games and toys. In particular, we present NIKVision, a tabletop device intended to give leisure and fun while reinforcing physical manipulation and colocated gaming for 3-6 year old children. Several hybrid (physical/digital games based on the manipulation of passive and active toys have been developed for NIKVision. From our experience several useful lessons can be extracted. Among them, the necessity of bridging the gap between designers and developers making it easier the prototyping of tabletop games stands out. To tackle this difficulty a toolkit for the prototyping of tabletop games called ToyVision has been created. The toolkit supports designers to fully explore the physical feasibilities of the manipulation of physical playing pieces, while minimizing the technical difficulties of implementing tabletop games based on physical manipulation. This way, NIKVision and ToyVision are becoming powerful tools to develop innovative

  20. Invasive Intraneural Interfaces: Foreign Body Reaction Issues

    Directory of Open Access Journals (Sweden)

    Fiorenza Lotti

    2017-09-01

    Full Text Available Intraneural interfaces are stimulation/registration devices designed to couple the peripheral nervous system (PNS with the environment. Over the last years, their use has increased in a wide range of applications, such as the control of a new generation of neural-interfaced prostheses. At present, the success of this technology is limited by an electrical impedance increase, due to an inflammatory response called foreign body reaction (FBR, which leads to the formation of a fibrotic tissue around the interface, eventually causing an inefficient transduction of the electrical signal. Based on recent developments in biomaterials and inflammatory/fibrotic pathologies, we explore and select the biological solutions that might be adopted in the neural interfaces FBR context: modifications of the interface surface, such as organic and synthetic coatings; the use of specific drugs or molecular biology tools to target the microenvironment around the interface; the development of bio-engineered-scaffold to reduce immune response and promote interface-tissue integration. By linking what we believe are the major crucial steps of the FBR process with related solutions, we point out the main issues that future research has to focus on: biocompatibility without losing signal conduction properties, good reproducible in vitro/in vivo models, drugs exhaustion and undesired side effects. The underlined pros and cons of proposed solutions show clearly the importance of a better understanding of all the molecular and cellular pathways involved and the need of a multi-target action based on a bio-engineered combination approach.

  1. Colloid and interface chemistry for nanotechnology

    CERN Document Server

    Kralchevsky, Peter

    2013-01-01

    Colloid and interface science dealt with nanoscale objects for nearly a century before the term nanotechnology was coined. An interdisciplinary field, it bridges the macroscopic world and the small world of atoms and molecules. Colloid and Interface Chemistry for Nanotechnology is a collection of manuscripts reflecting the activities of research teams that have been involved in the networking project Colloid and Interface Chemistry for Nanotechnology (2006-2011), Action D43, the European Science Foundation. The project was a part of the intergovernmental framework for Cooperation in Science an

  2. Nanopore-CMOS Interfaces for DNA Sequencing.

    Science.gov (United States)

    Magierowski, Sebastian; Huang, Yiyun; Wang, Chengjie; Ghafar-Zadeh, Ebrahim

    2016-08-06

    DNA sequencers based on nanopore sensors present an opportunity for a significant break from the template-based incumbents of the last forty years. Key advantages ushered by nanopore technology include a simplified chemistry and the ability to interface to CMOS technology. The latter opportunity offers substantial promise for improvement in sequencing speed, size and cost. This paper reviews existing and emerging means of interfacing nanopores to CMOS technology with an emphasis on massively-arrayed structures. It presents this in the context of incumbent DNA sequencing techniques, reviews and quantifies nanopore characteristics and models and presents CMOS circuit methods for the amplification of low-current nanopore signals in such interfaces.

  3. iPhone User Interface Cookbook

    CERN Document Server

    Banga, Cameron

    2011-01-01

    Written in a cookbook style, this book offers solutions using a recipe based approach. Each recipe contains step-by-step instructions followed by an analysis of what was done in each task and other useful information. The cookbook approach means you can dive into whatever recipes you want in no particular order. The iPhone Interface Cookbook is written from the ground up for people who are new to iOS or application interface design in general. Each chapter discusses the reasoning and design strategy behind critical interface components, as well as how to best integrate each into any iPhone or

  4. Ludic interfaces. Driver and product of gamification

    Directory of Open Access Journals (Sweden)

    Mathias Fuchs

    2012-05-01

    Full Text Available The recent success of non-standard and playful interface devices like Wii Remote, Move, and Kinect is an indicator of a process that demonstrates that ludic interfaces might be the core driver for a transformation in the sector of video games cultures and beyond. Yet, ludic interfaces are drivers—as well as driven by social developments known as the ludification (Raessens, 2006; Fuchs & Strouhal, 2008, or the gamification of society (Schell, 2010; Bogost, 2010; Ionifides, 2011; Deterding, Khaled, Nacke, & Dixon, 2011.

  5. Dynamical transitions of a driven Ising interface.

    Science.gov (United States)

    Sahai, Manish K; Sengupta, Surajit

    2008-03-01

    We study the structure of an interface in a three-dimensional Ising system created by an external nonuniform field H(r,t) . H changes sign over a two-dimensional plane of arbitrary orientation. When the field is pulled with velocity v(e) , [i.e., H(r,t)=H(r-v(e)t) ], the interface undergoes several dynamical transitions. For low velocities it is pinned by the field profile and moves along with it, the distribution of local slopes undergoing a series of commensurate-incommensurate transitions. For large v(e) the interface depins and grows with Kardar-Parisi-Zhang exponents.

  6. LTE-advanced air interface technology

    CERN Document Server

    Zhang, Xincheng

    2012-01-01

    Opportunities are at hand for professionals eager to learn and apply the latest theories and practices in air interface technologies. Written by experienced researchers and professionals, LTE-Advanced Air Interface Technology thoroughly covers the performance targets and technology components studied by 3GPP for LTE-Advanced. Besides being an explanatory text about LTE-Advanced air interface technology, this book exploits the technical details in the 3GPP specification, and explains the motivation and implication behind the specifications.After a general description of wireless cellular techno

  7. Interface structure between tetraglyme and graphite

    Science.gov (United States)

    Minato, Taketoshi; Araki, Yuki; Umeda, Kenichi; Yamanaka, Toshiro; Okazaki, Ken-ichi; Onishi, Hiroshi; Abe, Takeshi; Ogumi, Zempachi

    2017-09-01

    Clarification of the details of the interface structure between liquids and solids is crucial for understanding the fundamental processes of physical functions. Herein, we investigate the structure of the interface between tetraglyme and graphite and propose a model for the interface structure based on the observation of frequency-modulation atomic force microscopy in liquids. The ordering and distorted adsorption of tetraglyme on graphite were observed. It is found that tetraglyme stably adsorbs on graphite. Density functional theory calculations supported the adsorption structure. In the liquid phase, there is a layered structure of the molecular distribution with an average distance of 0.60 nm between layers.

  8. Concept of software interface for BCI systems

    Science.gov (United States)

    Svejda, Jaromir; Zak, Roman; Jasek, Roman

    2016-06-01

    Brain Computer Interface (BCI) technology is intended to control external system by brain activity. One of main part of such system is software interface, which carries about clear communication between brain and either computer or additional devices connected to computer. This paper is organized as follows. Firstly, current knowledge about human brain is briefly summarized to points out its complexity. Secondly, there is described a concept of BCI system, which is then used to build an architecture of proposed software interface. Finally, there are mentioned disadvantages of sensing technology discovered during sensing part of our research.

  9. Generic Interfaces for Managing Web Data

    Directory of Open Access Journals (Sweden)

    Oleg Burlaca

    2005-05-01

    Full Text Available This paper discusses a generic user interface for managing web data that is incorporated in a content management system. The interface is created at run-time from a set of XML documents stored in database. We accentuate the importance of content analysis phase that leads to a well formed data model. Another important aspect is the use of context in the interface and the hierarchical model to represent multiple relationships between hierarchy items. The proposed event model acts like a glue between data management and application logic.

  10. Design of an Audio Interface for Patmos

    OpenAIRE

    Ausin, Daniel Sanz; Goerge, Fabian

    2017-01-01

    This paper describes the design and implementation of an audio interface for the Patmos processor, which runs on an Altera DE2-115 FPGA board. This board has an audio codec included, the WM8731. The interface described in this work allows to receive and send audio from and to the WM8731, and to synthesize, store or manipulate audio signals writing C programs for Patmos. The audio interface described in this paper is intended to be used with the Patmos processor. Patmos is an open source RISC ...

  11. ooi: OpenStack OCCI interface

    Directory of Open Access Journals (Sweden)

    Álvaro López García

    2016-01-01

    Full Text Available In this document we present an implementation of the Open Grid Forum’s Open Cloud Computing Interface (OCCI for OpenStack, namely ooi (Openstack occi interface, 2015  [1]. OCCI is an open standard for management tasks over cloud resources, focused on interoperability, portability and integration. ooi aims to implement this open interface for the OpenStack cloud middleware, promoting interoperability with other OCCI-enabled cloud management frameworks and infrastructures. ooi focuses on being non-invasive with a vanilla OpenStack installation, not tied to a particular OpenStack release version.

  12. ooi: OpenStack OCCI interface

    Science.gov (United States)

    López García, Álvaro; Fernández del Castillo, Enol; Orviz Fernández, Pablo

    In this document we present an implementation of the Open Grid Forum's Open Cloud Computing Interface (OCCI) for OpenStack, namely ooi (Openstack occi interface, 2015) [1]. OCCI is an open standard for management tasks over cloud resources, focused on interoperability, portability and integration. ooi aims to implement this open interface for the OpenStack cloud middleware, promoting interoperability with other OCCI-enabled cloud management frameworks and infrastructures. ooi focuses on being non-invasive with a vanilla OpenStack installation, not tied to a particular OpenStack release version.

  13. Diffuse-Interface Methods in Fluid Mechanics

    Science.gov (United States)

    Anderson, D. M.; McFadden, G. B.; Wheeler, A. A.

    1997-01-01

    The authors review the development of diffuse-interface models of hydrodynamics and their application to a wide variety of interfacial phenomena. The authors discuss the issues involved in formulating diffuse-interface models for single-component and binary fluids. Recent applications and computations using these models are discussed in each case. Further, the authors address issues including sharp-interface analyses that relate these models to the classical free-boundary problem, related computational approaches to describe interfacial phenomena, and related approaches describing fully-miscible fluids.

  14. Synchronization Interfaces for Improving Moodle Utilization

    Directory of Open Access Journals (Sweden)

    GM Arya Sasmita

    2012-03-01

    Full Text Available Many universities have applied e-learning on more than one LMS (Learning Management System platforms such as Wordpress and Moodle. In addition, difficulties implementations in developing countries have occurred. Those are mainly caused by limitations and expensive of Internet infrastructure. Therefore to increase Moodle application as an e-learning system, the paper proposed two synchronization interfaces. The first interface is for Moodle and Wordpress. This assists teachers to migrate their learning material in their blog in Wordpress into Moodle. Second interface is for Moodle portable performing offline LMS and Moodle performing online LMS. Moodle portable was installed in teachers and students notebooks. Moodle itself was installed and run in e-learning server. The aim is to improve Moodle utilization in the class. The results showed satisfied outcomes. Students and teachers could employ the interfaces easily and secure as they have to login using student/teacher ID, course ID, username and password.

  15. Dynamically Generated Interfaces in XML Based Architecture

    CERN Document Server

    Gupta, Minit

    2009-01-01

    Providing on-line services on the Internet will require the definition of flexible interfaces that are capable of adapting to the user's characteristics. This is all the more important in the context of medical applications like home monitoring, where no two patients have the same medical profile. Still, the problem is not limited to the capacity of defining generic interfaces, as has been made possible by UIML, but also to define the underlying information structures from which these may be generated. The DIATELIC project deals with the tele-monitoring of patients under peritoneal dialysis. By means of XML abstractions, termed as "medical components", to represent the patient's profile, the application configures the customizable properties of the patient's interface and generates a UIML document dynamically. The interface allows the patient to feed the data manually or use a device which allows "automatic data acquisition". The acquired medical data is transferred to an expert system, which analyses the dat...

  16. Navigation with a passive brain based interface

    NARCIS (Netherlands)

    Erp, J.B.F. van; Werkhoven, P.J.; Thurlings, M.E.; Brouwer, A.-M.

    2009-01-01

    In this paper, we describe a Brain Computer Interface (BCI) for navigation. The system is based on detecting brain signals that are elicited by tactile stimulation on the torso indicating the desired direction.

  17. Dynamics of swimming bacteria at complex interfaces

    CERN Document Server

    Lopez, Diego

    2014-01-01

    Flagellated bacteria exploiting helical propulsion are known to swim along circular trajectories near surfaces. Fluid dynamics predicts this circular motion to be clockwise (CW) above a rigid surface (when viewed from inside the fluid) and counter-clockwise (CCW) below a free surface. Recent experimental investigations showed that complex physicochemical processes at the nearby surface could lead to a change in the direction of rotation, both at solid surfaces absorbing slip-inducing polymers and interfaces covered with surfactants. Motivated by these results, we use a far-field hydrodynamic model to predict the kinematics of swimming near three types of interfaces: clean fluid-fluid interface, slipping rigid wall, and a fluid interface covered by incompressible surfactants. Representing the helical swimmer by a superposition of hydrodynamic singularities, we first show that in all cases the surfaces reorient the swimmer parallel to the surface and attract it, both of which are a consequence of the Stokes dip...

  18. Tengi Interfaces for Tracing between Heterogeneous Components

    DEFF Research Database (Denmark)

    Pfeiffer, Rolf-Helge; Wasowski, Andrzej

    2012-01-01

    for the definition of software components containing heterogeneous artifacts. Tengi interfaces link components containing different textual and visual software development artifacts ranging from high-level specification documents to low-level implementation documents. We formally define and implement Tengi...

  19. A Natural Language Interface to Databases

    Science.gov (United States)

    Ford, D. R.

    1990-01-01

    The development of a Natural Language Interface (NLI) is presented which is semantic-based and uses Conceptual Dependency representation. The system was developed using Lisp and currently runs on a Symbolics Lisp machine.

  20. Theory of Spin Loss at Metallic Interfaces

    Science.gov (United States)

    Belashchenko, K. D.; Kovalev, Alexey A.; van Schilfgaarde, M.

    2016-11-01

    Interfacial spin-flip scattering plays an important role in magnetoelectronic devices. Spin loss at metallic interfaces is usually quantified by matching the magnetoresistance data for multilayers to the Valet-Fert model, while treating each interface as a fictitious bulk layer whose thickness is δ times the spin-diffusion length. By employing the properly generalized circuit theory and the scattering matrix approaches, we derive the relation of the parameter δ to the spin-flip transmission and reflection probabilities at an individual interface. It is found that δ is proportional to the square root of the probability of spin-flip scattering. We calculate the spin-flip scattering probabilities for flat and rough Cu /Pd interfaces using the Landauer-Büttiker method based on the first-principles electronic structure and find δ to be in reasonable agreement with experiment.

  1. Applying Cognitive Psychology to User Interfaces

    Science.gov (United States)

    Durrani, Sabeen; Durrani, Qaiser S.

    This paper explores some key aspects of cognitive psychology that may be mapped onto user interfaces. Major focus in existing user interface guidelines is on consistency, simplicity, feedback, system messages, display issues, navigation, colors, graphics, visibility and error prevention [8-10]. These guidelines are effective indesigning user interfaces. However, these guidelines do not handle the issues that may arise due to the innate structure of human brain and human limitations. For example, where to place graphics on the screen so that user can easily process them and what kind of background should be given on the screen according to the limitation of human motor system. In this paper we have collected some available guidelines from the area of cognitive psychology [1, 5, 7]. In addition, we have extracted few guidelines from theories and studies of cognitive psychology [3, 11] which may be mapped to user interfaces.

  2. Mode III effects on interface delamination

    DEFF Research Database (Denmark)

    Tvergaard, Viggo; Hutchinson, J.W.

    2008-01-01

    mode III has an effect. Subsequently, the focus is on crack growth along an interface between an elastic-plastic solid and an elastic substrate. The analyses are carried out for conditions of small-scale yielding, with the fracture process at the interface represented by a cohesive zone model. Due......For crack growth along an interface between dissimilar materials the effect of combined modes I, II and III at the crack-tip is investigated. First, in order to highlight situations where crack growth is affected by a mode III contribution, examples of material configurations are discussed where...... to the mismatch of elastic properties across the interface the corresponding elastic solution has an oscillating stress singularity, and this solution is applied as boundary conditions on the outer edge of the region analyzed. For several combinations of modes I, II and III crack growth resistance curves...

  3. Topology Optimization using an Explicit Interface Representation

    DEFF Research Database (Denmark)

    Christiansen, Asger Nyman; Nobel-Jørgensen, Morten; Bærentzen, J. Andreas;

    Current methods for topology optimization primarily represent the interface between solid and void implicitly on fixed grids. In contrast, shape optimization methods represent the interface explicitly, but do not allow for any topological changes to the structure. Using an explicit interface...... to handle topology changes. It does so by discretizing the entire design domain into an irregular adaptive triangle mesh and thereby explicitly representing both the structure and the embedding space. In other words, the entire design domain is divided into triangles, where the interface is represented...... the final design. The status of the work is that the method has been developed and is showing promising results. For instance, the cantilever beam problem has been solved to a high precision using a fine discretization by evaluating the objective function approximately 500 times. This took around 100...

  4. Interface of magnetoresistive converter of active power

    Directory of Open Access Journals (Sweden)

    A. I. Vytiaganets

    2009-10-01

    Full Text Available The vehicle and programmatic interfaces of magnetoresistive converter of active power are considered, the results of statistical treatment of the multiple measuring of active-power are analysed.

  5. Client Interfaces to the Virtual Observatory Registry

    CERN Document Server

    Demleitner, Markus; Taylor, Mark; Normand, Jonathan

    2015-01-01

    The Virtual Observatory Registry is a distributed directory of information systems and other resources relevant to astronomy. To make it useful, facilities to query that directory must be provided to humans and machines alike. This article reviews the development and status of such facilities, also considering the lessons learnt from about a decade of experience with Registry interfaces. After a brief outline of the history of the standards development, it describes the use of Registry interfaces in some popular clients as well as dedicated UIs for interrogating the Registry. It continues with a thorough discussion of the design of the two most recent Registry interface standards, RegTAP on the one hand and a full-text-based interface on the other hand. The article finally lays out some of the less obvious conventions that emerged in the interaction between providers of registry records and Registry users as well as remaining challenges and current developments.

  6. Navigation with a passive brain based interface

    NARCIS (Netherlands)

    Erp, J.B.F. van; Werkhoven, P.J.; Thurlings, M.E.; Brouwer, A.-M.

    2009-01-01

    In this paper, we describe a Brain Computer Interface (BCI) for navigation. The system is based on detecting brain signals that are elicited by tactile stimulation on the torso indicating the desired direction.

  7. Client interfaces to the Virtual Observatory Registry

    Science.gov (United States)

    Demleitner, M.; Harrison, P.; Taylor, M.; Normand, J.

    2015-04-01

    The Virtual Observatory Registry is a distributed directory of information systems and other resources relevant to astronomy. To make it useful, facilities to query that directory must be provided to humans and machines alike. This article reviews the development and status of such facilities, also considering the lessons learnt from about a decade of experience with Registry interfaces. After a brief outline of the history of the standards development, it describes the use of Registry interfaces in some popular clients as well as dedicated UIs for interrogating the Registry. It continues with a thorough discussion of the design of the two most recent Registry interface standards, RegTAP on the one hand and a full-text-based interface on the other hand. The article finally lays out some of the less obvious conventions that emerged in the interaction between providers of registry records and Registry users as well as remaining challenges and current developments.

  8. The dynamics of foams with mobile interfaces

    Science.gov (United States)

    Gratton, Michael B.; Davis, Stephen H.

    2011-11-01

    Using a novel technique for resolving nearly singular integrals, we investigate the dynamics of two-dimensional foams with mobile interfaces and an incompressible, inviscid gas phase by a boundary integral method. For foams with small liquid fractions (CMMI-0826703.

  9. Ultrasonic Characterization of Interfaces in Composite Bonds

    Science.gov (United States)

    Wang, N.; Lobkis, O. I.; Rokhlin, S. I.; Cantrell, J. H.

    2010-01-01

    The inverse determination of imperfect interfaces from reflection spectra of normal and oblique incident ultrasonic waves in adhesive bonds of multidirectional composites is investigated. The oblique measurements are complicated by the highly dispersed nature of oblique wave spectra at frequencies above 3MHz. Different strategies for bond property reconstruction, including a modulation method, are discussed. The relation of measured interfacial spring density to the physico-chemical model of a composite interface described by polymer molecular bonds to emulate loss of molecular strength on an adhesive composite interface is discussed. This potentially relates the interfacial (adhesion) strength (number of bonds at the adhesive substrate interface) to the spring constant (stiffness) area density (flux), which is an ultrasonically measurable parameter.

  10. Solid Surfaces, Interfaces and Thin Films

    CERN Document Server

    Lüth, Hans

    2010-01-01

    This book emphasises both experimental and theoretical aspects of surface, interface and thin film physics. As in previous editions the preparation of surfaces and thin films, their atomic and morphological, their vibronic and electronic properties as well as fundamentals of adsorption are treated. Because of their importance in modern information technology and nanostructure physics particular emphasis is paid to electronic surface and interface states, semiconductor space charge layers and heterostructures as well as to superconductor/semiconductor interfaces and magnetic thin films. The latter topic was significantly extended in this new edition by more details about the giant magnetoresistance and a section about the spin-transfer torque mechanism including one new problem as exercise. Two new panels about Kerr-effect and spin-polarized scanning tunnelling microscopy were added, too. Furthermore, the meanwhile important group III-nitride surfaces and high-k oxide/semiconductor interfaces are shortly discu...

  11. The reliable multicast protocol application programming interface

    Science.gov (United States)

    Montgomery , Todd; Whetten, Brian

    1995-01-01

    The Application Programming Interface for the Berkeley/WVU implementation of the Reliable Multicast Protocol is described. This transport layer protocol is implemented as a user library that applications and software buses link against.

  12. Self-diffusion in liquid interfaces.

    Science.gov (United States)

    Herth, Simone; Ye, Feng; Eggersmann, Martin; Gutfleisch, Oliver; Würschum, Roland

    2004-03-05

    For studying self-diffusion in liquid interfaces, 59Fe tracer diffusion was measured on ultrafine-grained Nd2Fe14B which undergoes an intergranular melting transition for low Nd excess. The diffusion coefficient in the intergranular liquid layers is found to be lower than in bulk melts indicating a hampered atomic mobility due to confinement. Well above the intergranular melting transition, the diffusivity in the liquid interfaces approaches a value characteristic for bulk melts.

  13. Web services interface to EPICS channel access

    Institute of Scientific and Technical Information of China (English)

    DUAN Lei; SHEN Liren

    2008-01-01

    Web services is used in Experimental Physics and Industrial Control System (EPICS). Combined with EPICS Channel Access protocol, Web services' high usability, platform independence and language independence can be used to design a fully transparent and uniform software interface layer, which helps us complete channel data acquisition, modification and monitoring functions. This software interface layer, a cross-platform of cross-language,has good interopcrability and reusability.

  14. Designing Gestural Interfaces Touchscreens and Interactive Devices

    CERN Document Server

    Saffer, Dan

    2008-01-01

    If you want to get started in new era of interaction design, this is the reference you need. Packed with informative illustrations and photos, Designing Gestural Interfaces provides you with essential information about kinesiology, sensors, ergonomics, physical computing, touchscreen technology, and new interface patterns -- information you need to augment your existing skills in traditional" websites, software, or product development. This book will help you enter this new world of possibilities."

  15. Distributed user interfaces usability and collaboration

    CERN Document Server

    Lozano, María D; Tesoriero, Ricardo; Penichet, Victor MR

    2013-01-01

    Written by international researchers in the field of Distributed User Interfaces (DUIs), this book brings together important contributions regarding collaboration and usability in Distributed User Interface settings. Throughout the thirteen chapters authors address key questions concerning how collaboration can be improved by using DUIs, including: in which situations a DUI is suitable to ease the collaboration among users; how usability standards can be used to evaluate the usability of systems based on DUIs; and accurately describe case studies and prototypes implementing these concerns

  16. The LOLITA User-Definable Template Interface

    OpenAIRE

    Košmelj, Katarina

    2001-01-01

    The development of user-definable templates interfaces which allow the user to design new templates definitions in a user-friendly way is a new issue in the field of information extraction. The LOLITA user-definable templates interface allows the user to define new templates using sentences in natural language text with a few restrictions and formal elements. This approach is rather different from previous approaches to information extraction which require developers to code the template defi...

  17. Communications interface for wireless communications headset

    Science.gov (United States)

    Seibert, Marc A. (Inventor); Culotta, Jr., Anthony Joseph (Inventor)

    2004-01-01

    A universal interface adapter circuit interfaces, for example, a wireless communications headset with any type of communications system, including those that require push-to-talk (PTT) signaling. The interface adapter is comprised of several main components, including an RF signaling receiver, a microcontroller and associated circuitry for decoding and processing the received signals, and programmable impedance matching and line interfacing circuitry for interfacing a wireless communications headset system base to a communications system. A signaling transmitter, which is preferably portable (e.g., handheld), is employed by the wireless headset user to send signals to the signaling receiver. In an embodiment of the invention directed specifically to push-to-talk (PTT) signaling, the wireless headset user presses a button on the signaling transmitter when they wish to speak. This sends a signal to the microcontroller which decodes the signal and recognizes the signal as being a PTT request. In response, the microcontroller generates a control signal that closes a switch to complete a voice connection between the headset system base and the communications system so that the user can communicate with the communications system. With this arrangement, the wireless headset can be interfaced to any communications system that requires PTT signaling, without modification of the headset device. In addition, the interface adapter can also be configured to respond to or deliver any other types of signals, such as dual-tone-multiple-frequency (DTMF) tones, and on/off hook signals. The present invention is also scalable, and permits multiple wireless users to operate independently in the same environment through use of a plurality of the interface adapters.

  18. System Integration and Interface Transition Issues.

    Science.gov (United States)

    1977-04-01

    Continue onl reverse side It necesay and identify by block number) System Interfaces Program Objectives System-Level Issues Digitization Strategy DCS... DIGITIZATION STRATEGY IV-1 1. Digitization Considerations IV-l a. Commercial IV-1 b. Current DCS Digitization IV-2 c. DCS Transition IV-2 2. Overseas...Subsystems and Elements 3. AUTOSEVOCOM Il/Digital Transmission Interface VIII-I 4. Transmission Digitization Strategy - PCM Vs. DM VIII-2 5. DCS Encryption

  19. SIMS: Single Interface to Multiple Systems.

    Science.gov (United States)

    1988-02-01

    on the interface design [ CARL 79]. The separation advantage works in the other direction as well. If the interface needs to be changed (e.g...Execution Monitoring. Proceedings of the Sixth National Conference on Artificial Intelligence, pages 190-195, (1987). [ CARL 79] E. Carlson and W. Metz. A...4, (1987). [NEBE 87] Bernhard Nebel . Computational Complexity of Terminological Reasoning in BACK. S Technical Report Number 43, Technische

  20. Moessbauer spectroscopy study of interfaces for spintronics

    Energy Technology Data Exchange (ETDEWEB)

    Mantovan, R., E-mail: roberto.mantovan@mdm.infm.it; Wiemer, C.; Lamperti, A.; Georgieva, M.; Fanciulli, M. [Laboratorio Nazionale MDM CNR-INFM (Italy); Goikhman, A.; Barantsev, N.; Lebedinskii, Yu.; Zenkevich, A. [Moscow Engineering Physics Institute (Russian Federation)

    2009-06-15

    The submonolayer sensitivity and element-specificity of conversion electron Moessbauer spectroscopy, combined with the use of {sup 57}Fe enriched tracer layers, enable to carefully investigate thin films and interfaces at the atomic-scale. This paper reports on the main achievements we obtained so far in the study of structural, chemical, and magnetic properties of a variety of interfaces between oxides and Fe-based films having potential interest in the field of spintronics.

  1. Web Interfacing for Task Supervision and Specification

    OpenAIRE

    Tomatis, N.; Moreau, B.

    2001-01-01

    The Autonomous Systems Lab at the Swiss Federal Institute of Technology Lausanne (EPFL) is engaged in mobile robotics research. The lab’s research focuses mainly on indoor localization and map building, outdoor locomotion and navigation, and micro mobile robotics. In the framework of a research project on mobile robot localization, a graphical web interface for our indoor robots has been developed. The purpose of this interface is twofold: it serves as a tool for task supervision for the rese...

  2. THE INTERFACE OF COMPUTER SCIENCE AND STATISTICS.

    Science.gov (United States)

    Computer science and statistics have each been separately documented by many books as well as numerous papers. However, the interface of computer ...prerequisites to the computer and mathematical prerequisites to computer science and of the foundations for probability and statistics. Development of statistics prior to 1900 then is reviewed. (Author)... science and statistics, the area of their interaction, has been documented only in part. The paper begins characterization of the entire interface by

  3. Numerical simulation of droplet impact on interfaces

    Science.gov (United States)

    Kahouadji, Lyes; Che, Zhizhao; Matar, Omar; Shin, Seungwon; Chergui, Jalel; Juric, Damir

    2015-11-01

    Simulations of three-dimensional droplet impact on interfaces are carried out using BLUE, a massively-parallel code based on a hybrid Front-Tracking/Level-Set algorithm for Lagrangian tracking of arbitrarily deformable phase interfaces. High resolution numerical results show fine details and features of droplet ejection, crown formation and rim instability observed under similar experimental conditions. EPSRC Programme Grant, MEMPHIS, EP/K0039761/1.

  4. Thermal transfer in graphene-interfaced materials: contact resistance and interface engineering.

    Science.gov (United States)

    Wang, Hanxiong; Gong, Jixuan; Pei, Yongmao; Xu, Zhiping

    2013-04-10

    We investigate here heat transfer across interfaces consisting of single- and few-layer graphene sheets between silicon carbides by performing nonequilibrium molecular dynamics simulations. The interfacial thermal conducitivity κI is calculated by considering graphene layers as an interfacial phase. The results indicate that κI decreases with its thickness and heat flux but increases with the environmental temperature. Interface engineering of κI is explored by intercalating molecules between graphene layers. These guest molecules decouple electronic states across the interface, but tune κI slightly, leading to a thermally transparent but electronically insulating interface. These results provide a fundamental understanding in thermal transport across weakly bound interfaces, and design recipes for multifunctional thermal interface materials, composites and thermal management in graphene-based devices.

  5. Fermi level pinning effects at gate-dielectric interfaces influenced by interface state densities

    Institute of Scientific and Technical Information of China (English)

    洪文婷; 韩伟华; 吕奇峰; 王昊; 杨富华

    2015-01-01

    The dependences of Fermi-level pinning on interface state densities for the metal–dielectric, ploycrystalline silicon–dielectric, and metal silicide–dielectric interfaces are investigated by calculating their effective work functions and their pinning factors. The Fermi-level pinning factors and effective work functions of the metal–dielectric interface are observed to be more susceptible to the increasing interface state densities, differing significantly from that of the ploycrystalline silicon–dielectric interface and the metal silicide–dielectric interface. The calculation results indicate that metal silicide gates with high-temperature resistance and low resistivity are a more promising choice for the design of gate materials in metal-oxide semiconductor (MOS) technology.

  6. Hard-Soft Tissue Interface Engineering.

    Science.gov (United States)

    Armitage, Oliver E; Oyen, Michelle L

    2015-01-01

    The musculoskeletal system is comprised of three distinct tissue categories: structural mineralized tissues, actuating muscular soft tissues, and connective tissues. Where connective tissues - ligament, tendon and cartilage - meet with bones, a graded interface in mechanical properties occurs that allows the transmission of load without creating stress concentrations that would cause tissue damage. This interface typically occurs over less than 1 mm and contains a three order of magnitude difference in elastic stiffness, in addition to changes in cell type and growth factor concentrations among others. Like all engineered tissues, the replication of these interfaces requires the production of scaffolds that will provide chemical and mechanical cues, resulting in biologically accurate cellular differentiation. For interface tissues however, the scaffold must provide spatially graded chemical and mechanical cues over sub millimetre length scales. Naturally, this complicates the manufacture of the scaffolds and every stage of their subsequent cell seeding and growth, as each region has different optimal conditions. Given the higher degree of difficulty associated with replicating interface tissues compared to surrounding homogeneous tissues, it is likely that the development of complex musculoskeletal tissue systems will continue to be limited by the engineering of connective tissues interfaces with bone.

  7. The net charge at interfaces between insulators

    Science.gov (United States)

    Bristowe, N. C.; Littlewood, P. B.; Artacho, Emilio

    2011-03-01

    The issue of the net charge at insulating oxide interfaces is briefly reviewed with the ambition of dispelling myths of such charges being affected by covalency and related charge density effects. For electrostatic analysis purposes, the net charge at such interfaces is defined by the counting of discrete electrons and core ion charges, and by the definition of the reference polarization of the separate, unperturbed bulk materials. The arguments are illustrated for the case of a thin film of LaAlO3 over SrTiO3 in the absence of free carriers, for which the net charge is exactly 0.5e per interface formula unit, if the polarization response in both materials is referred to zero bulk values. Further consequences of the argument are extracted for structural and chemical alterations of such interfaces, in which internal rearrangements are distinguished from extrinsic alterations (changes of stoichiometry, redox processes), only the latter affecting the interfacial net charge. The arguments are reviewed alongside the proposal of Stengel and Vanderbilt (2009 Phys. Rev. B 80 241103) of using formal polarization values instead of net interfacial charges, based on the interface theorem of Vanderbilt and King-Smith (1993 Phys. Rev. B 48 4442-55). Implications for non-centrosymmetric materials are discussed, as well as for interfaces for which the charge mismatch is an integer number of polarization quanta.

  8. An electronic structure perspective of graphene interfaces

    Science.gov (United States)

    Schultz, Brian J.; Dennis, Robert V.; Lee, Vincent; Banerjee, Sarbajit

    2014-03-01

    The unusual electronic structure of graphene characterized by linear energy dispersion of bands adjacent to the Fermi level underpins its remarkable transport properties. However, for practical device integration, graphene will need to be interfaced with other materials: 2D layered structures, metals (as ad-atoms, nanoparticles, extended surfaces, and patterned metamaterial geometries), dielectrics, organics, or hybrid structures that in turn are constituted from various inorganic or organic components. The structural complexity at these nanoscale interfaces holds much promise for manifestation of novel emergent phenomena and provides a means to modulate the electronic structure of graphene. In this feature article, we review the modifications to the electronic structure of graphene induced upon interfacing with disparate types of materials with an emphasis on iterative learnings from theoretical calculations and electronic spectroscopy (X-ray absorption fine structure (XAFS) spectroscopy, scanning transmission X-ray microscopy (STXM), angle-resolved photoemission spectroscopy (ARPES), and X-ray magnetic circular dichroism (XMCD)). We discuss approaches for engineering and modulating a bandgap in graphene through interfacial hybridization, outline experimental methods for examining electronic structure at interfaces, and overview device implications of engineered interfaces. A unified view of how geometric and electronic structure are correlated at interfaces will provide a rational means for designing heterostructures exhibiting emergent physical phenomena with implications for plasmonics, photonics, spintronics, and engineered polymer and metal matrix composites.

  9. Simulation of Magnetic Phenomena at Realistic Interfaces

    KAUST Repository

    Grytsyuk, Sergiy

    2016-02-04

    In modern technology exciting developments are related to the ability to understand and control interfaces. Particularly, magnetic interfaces revealing spindependent electron transport are of great interest for modern spintronic devices, such as random access memories and logic devices. From the technological point of view, spintronic devices based on magnetic interfaces enable manipulation of the magnetism via an electric field. Such ability is a result of the different quantum effects arising from the magnetic interfaces (for example, spin transfer torque or spin-orbit torque) and it can reduce the energy consumption as compared to the traditional semiconductor electronic devices. Despite many appealing characteristics of these materials, fundamental understanding of their microscopic properties and related phenomena needs to be established by thorough investigation. In this work we implement first principles calculations in order to study the structural, electric, and magnetic properties as well as related phenomena of two types of interfaces with large potential in spintronic applications: 1) interfaces between antiferromagnetic 3d-metal-oxides and ferromagnetic 3d-metals and 2) interfaces between non-magnetic 5d(4d)- and ferromagnetic 3d-metals. A major difficulty in studying such interfaces theoretically is the typically large lattice mismatch. By employing supercells with Moir e patterns, we eliminate the artificial strain that leads to doubtful results and are able to describe the dependence of the atomic density at the interfaces on the component materials and their thicknesses. After establishing understanding about the interface structures, we investigate the electronic and magnetic properties. A Moir e supercell with transition layer is found to reproduce the main experimental findings and thus turns out to be the appropriate model for simulating magnetic misfit interfaces. In addition, we systematically study the magnetic anisotropy and Rashba band

  10. Regenerative Electrode Interfaces for Neural Prostheses.

    Science.gov (United States)

    Thompson, Cort H; Zoratti, Marissa J; Langhals, Nicholas B; Purcell, Erin K

    2016-04-01

    Neural prostheses are electrode arrays implanted in the nervous system that record or stimulate electrical activity in neurons. Rapid growth in the use of neural prostheses in research and clinical applications has occurred in recent years, but instability and poor patency in the tissue-electrode interface undermines the longevity and performance of these devices. The application of tissue engineering strategies to the device interface is a promising approach to improve connectivity and communication between implanted electrodes and local neurons, and several research groups have developed new and innovative modifications to neural prostheses with the goal of seamless device-tissue integration. These approaches can be broadly categorized based on the strategy used to maintain and regenerate neurons at the device interface: (1) redesign of the prosthesis architecture to include finer-scale geometries and/or provide topographical cues to guide regenerating neural outgrowth, (2) incorporation of material coatings and bioactive molecules on the prosthesis to improve neuronal growth, viability, and adhesion, and (3) inclusion of cellular grafts to replenish the local neuron population or provide a target site for reinnervation (biohybrid devices). In addition to stabilizing the contact between neurons and electrodes, the potential to selectively interface specific subpopulations of neurons with individual electrode sites is a key advantage of regenerative interfaces. In this study, we review the development of regenerative interfaces for applications in both the peripheral and central nervous system. Current and future development of regenerative interfaces has the potential to improve the stability and selectivity of neural prostheses, improving the patency and resolution of information transfer between neurons and implanted electrodes.

  11. Understanding and Design of Polymer Device Interfaces

    Energy Technology Data Exchange (ETDEWEB)

    Kahn, Antoine [Princeton Univ., NJ (United States)

    2015-10-26

    The research performed under grant DE-FG02-04ER46165 between May 2008 and April 2011 focused on the understanding and control of interfaces of organic semiconductors in general, and polymer interfaces more specifically. This work was a joined effort by three experimentalists and a theoretician. Emphasis was placed on the determination of the electronic structure of these interfaces, i.e. the relative energy position of molecular levels across these interfaces. From these electronic structures depend the injection, extraction and transport of charge carriers into, from and across, respectively, all (opto)electronic devices made of these semiconductors. A significant fraction of our work focused on ways to modify and optimize interfaces, for example via chemical doping of the semiconductors to reduce interface energy barriers or via deposition of ultra-thin work function-reducing polymer or self-assembled monolayers of dipolar molecules. Another significant fraction of our work was devoted to exploring alternate and unconventional interface formation methods, in particular the soft-contact lamination of both metal contacts and polymer overlayers on top of polymer films. These methods allowed us to better understand the impact of hot metal atom evaporation on a soft organic surface, as well as the key mechanisms that control the energetics of polymer/polymer heterojunctions. Finally, a significant fraction of the research was directed to understanding the electronic structure of buried polymer heterojunctions, in particular within donor/acceptor blends of interest in organic photovoltaic applications. The work supported by this grant resulted in 17 publications in some of the best peer-reviewed journals of the field, as well as numerous presentations at US and international conferences.

  12. User Interface Technology for Formal Specification Development

    Science.gov (United States)

    Lowry, Michael; Philpot, Andrew; Pressburger, Thomas; Underwood, Ian; Lum, Henry, Jr. (Technical Monitor)

    1994-01-01

    Formal specification development and modification are an essential component of the knowledge-based software life cycle. User interface technology is needed to empower end-users to create their own formal specifications. This paper describes the advanced user interface for AMPHION1 a knowledge-based software engineering system that targets scientific subroutine libraries. AMPHION is a generic, domain-independent architecture that is specialized to an application domain through a declarative domain theory. Formal specification development and reuse is made accessible to end-users through an intuitive graphical interface that provides semantic guidance in creating diagrams denoting formal specifications in an application domain. The diagrams also serve to document the specifications. Automatic deductive program synthesis ensures that end-user specifications are correctly implemented. The tables that drive AMPHION's user interface are automatically compiled from a domain theory; portions of the interface can be customized by the end-user. The user interface facilitates formal specification development by hiding syntactic details, such as logical notation. It also turns some of the barriers for end-user specification development associated with strongly typed formal languages into active sources of guidance, without restricting advanced users. The interface is especially suited for specification modification. AMPHION has been applied to the domain of solar system kinematics through the development of a declarative domain theory. Testing over six months with planetary scientists indicates that AMPHION's interactive specification acquisition paradigm enables users to develop, modify, and reuse specifications at least an order of magnitude more rapidly than manual program development.

  13. An interface tracking model for droplet electrocoalescence.

    Energy Technology Data Exchange (ETDEWEB)

    Erickson, Lindsay Crowl

    2013-09-01

    This report describes an Early Career Laboratory Directed Research and Development (LDRD) project to develop an interface tracking model for droplet electrocoalescence. Many fluid-based technologies rely on electrical fields to control the motion of droplets, e.g. microfluidic devices for high-speed droplet sorting, solution separation for chemical detectors, and purification of biodiesel fuel. Precise control over droplets is crucial to these applications. However, electric fields can induce complex and unpredictable fluid dynamics. Recent experiments (Ristenpart et al. 2009) have demonstrated that oppositely charged droplets bounce rather than coalesce in the presence of strong electric fields. A transient aqueous bridge forms between approaching drops prior to pinch-off. This observation applies to many types of fluids, but neither theory nor experiments have been able to offer a satisfactory explanation. Analytic hydrodynamic approximations for interfaces become invalid near coalescence, and therefore detailed numerical simulations are necessary. This is a computationally challenging problem that involves tracking a moving interface and solving complex multi-physics and multi-scale dynamics, which are beyond the capabilities of most state-of-the-art simulations. An interface-tracking model for electro-coalescence can provide a new perspective to a variety of applications in which interfacial physics are coupled with electrodynamics, including electro-osmosis, fabrication of microelectronics, fuel atomization, oil dehydration, nuclear waste reprocessing and solution separation for chemical detectors. We present a conformal decomposition finite element (CDFEM) interface-tracking method for the electrohydrodynamics of two-phase flow to demonstrate electro-coalescence. CDFEM is a sharp interface method that decomposes elements along fluid-fluid boundaries and uses a level set function to represent the interface.

  14. Language workbench user interfaces for data analysis

    Science.gov (United States)

    Benson, Victoria M.

    2015-01-01

    Biological data analysis is frequently performed with command line software. While this practice provides considerable flexibility for computationally savy individuals, such as investigators trained in bioinformatics, this also creates a barrier to the widespread use of data analysis software by investigators trained as biologists and/or clinicians. Workflow systems such as Galaxy and Taverna have been developed to try and provide generic user interfaces that can wrap command line analysis software. These solutions are useful for problems that can be solved with workflows, and that do not require specialized user interfaces. However, some types of analyses can benefit from custom user interfaces. For instance, developing biomarker models from high-throughput data is a type of analysis that can be expressed more succinctly with specialized user interfaces. Here, we show how Language Workbench (LW) technology can be used to model the biomarker development and validation process. We developed a language that models the concepts of Dataset, Endpoint, Feature Selection Method and Classifier. These high-level language concepts map directly to abstractions that analysts who develop biomarker models are familiar with. We found that user interfaces developed in the Meta-Programming System (MPS) LW provide convenient means to configure a biomarker development project, to train models and view the validation statistics. We discuss several advantages of developing user interfaces for data analysis with a LW, including increased interface consistency, portability and extension by language composition. The language developed during this experiment is distributed as an MPS plugin (available at http://campagnelab.org/software/bdval-for-mps/). PMID:25755929

  15. Language workbench user interfaces for data analysis

    Directory of Open Access Journals (Sweden)

    Victoria M. Benson

    2015-02-01

    Full Text Available Biological data analysis is frequently performed with command line software. While this practice provides considerable flexibility for computationally savy individuals, such as investigators trained in bioinformatics, this also creates a barrier to the widespread use of data analysis software by investigators trained as biologists and/or clinicians. Workflow systems such as Galaxy and Taverna have been developed to try and provide generic user interfaces that can wrap command line analysis software. These solutions are useful for problems that can be solved with workflows, and that do not require specialized user interfaces. However, some types of analyses can benefit from custom user interfaces. For instance, developing biomarker models from high-throughput data is a type of analysis that can be expressed more succinctly with specialized user interfaces. Here, we show how Language Workbench (LW technology can be used to model the biomarker development and validation process. We developed a language that models the concepts of Dataset, Endpoint, Feature Selection Method and Classifier. These high-level language concepts map directly to abstractions that analysts who develop biomarker models are familiar with. We found that user interfaces developed in the Meta-Programming System (MPS LW provide convenient means to configure a biomarker development project, to train models and view the validation statistics. We discuss several advantages of developing user interfaces for data analysis with a LW, including increased interface consistency, portability and extension by language composition. The language developed during this experiment is distributed as an MPS plugin (available at http://campagnelab.org/software/bdval-for-mps/.

  16. Interface Metaphors for Interactive Machine Learning

    Energy Technology Data Exchange (ETDEWEB)

    Jasper, Robert J.; Blaha, Leslie M.

    2017-07-14

    To promote more interactive and dynamic machine learn- ing, we revisit the notion of user-interface metaphors. User-interface metaphors provide intuitive constructs for supporting user needs through interface design elements. A user-interface metaphor provides a visual or action pattern that leverages a user’s knowledge of another domain. Metaphors suggest both the visual representations that should be used in a display as well as the interactions that should be afforded to the user. We argue that user-interface metaphors can also offer a method of extracting interaction-based user feedback for use in machine learning. Metaphors offer indirect, context-based information that can be used in addition to explicit user inputs, such as user-provided labels. Implicit information from user interactions with metaphors can augment explicit user input for active learning paradigms. Or it might be leveraged in systems where explicit user inputs are more challenging to obtain. Each interaction with the metaphor provides an opportunity to gather data and learn. We argue this approach is especially important in streaming applications, where we desire machine learning systems that can adapt to dynamic, changing data.

  17. Tailoring Heterovalent Interface Formation with Light

    Energy Technology Data Exchange (ETDEWEB)

    Park, Kwangwook; Alberi, Kirstin

    2017-08-17

    Integrating different semiconductor materials into an epitaxial device structure offers additional degrees of freedom to select for optimal material properties in each layer. However, interface between materials with different valences (i.e. III-V, II-VI and IV semiconductors) can be difficult to form with high quality. Using ZnSe/GaAs as a model system, we explore the use of UV illumination during heterovalent interface growth by molecular beam epitaxy as a way to modify the interface properties. We find that UV illumination alters the mixture of chemical bonds at the interface, permitting the formation of Ga-Se bonds that help to passivate the underlying GaAs layer. Illumination also helps to reduce defects in the ZnSe epilayer. These results suggest that moderate UV illumination during growth may be used as a way to improve the optical properties of both the GaAs and ZnSe layers on either side of the interface.

  18. Engineering Interfaces for Photovoltaic Energy Conversion

    Science.gov (United States)

    Bent, Stacey

    2011-03-01

    Dye-sensitized solar cells (DSSCs) and the related quantum dot-sensitized solar cells (QDSSCs) show promise as inexpensive, efficient next-generation photovoltaic technologies. A typical cell design consists of a sensitizer chemisorbed to a nanoporous Ti O2 substrate; the sensitizer absorbs a photon and an excited electron is injected into the Ti O2 where it diffuses to the anode. However, many devices suffer from a high rate of electron-hole recombination at the interface between Ti O2 and the hole conductive material, leading to reduced conversion efficiency. In this work we explore whether a passivating layer at the interface can improve efficiency by acting as a barrier against electron recombination. We have studied both organic and inorganic approaches to modifying the interfacial properties in DSSC and QDSSC devices. In studies of CdS-based QDSSCs, a series of organic self-assembled monolayers were formed at the interface, and their effect on CdS uptake and resulting optoelectronic and device properties was investigated. In DSSCs, nanoscale inorganic dielectric films of different thicknesses were applied to the interface using atomic layer deposition prior to dye absorption. The effect on device performance was measured experimentally and compared with predictions from kinetic models. The results of these investigations will be discussed in the context of the ability of interface engineering to improve photovoltaic energy conversion.

  19. Anchored design of protein-protein interfaces.

    Directory of Open Access Journals (Sweden)

    Steven M Lewis

    Full Text Available BACKGROUND: Few existing protein-protein interface design methods allow for extensive backbone rearrangements during the design process. There is also a dichotomy between redesign methods, which take advantage of the native interface, and de novo methods, which produce novel binders. METHODOLOGY: Here, we propose a new method for designing novel protein reagents that combines advantages of redesign and de novo methods and allows for extensive backbone motion. This method requires a bound structure of a target and one of its natural binding partners. A key interaction in this interface, the anchor, is computationally grafted out of the partner and into a surface loop on the design scaffold. The design scaffold's surface is then redesigned with backbone flexibility to create a new binding partner for the target. Careful choice of a scaffold will bring experimentally desirable characteristics into the new complex. The use of an anchor both expedites the design process and ensures that binding proceeds against a known location on the target. The use of surface loops on the scaffold allows for flexible-backbone redesign to properly search conformational space. CONCLUSIONS AND SIGNIFICANCE: This protocol was implemented within the Rosetta3 software suite. To demonstrate and evaluate this protocol, we have developed a benchmarking set of structures from the PDB with loop-mediated interfaces. This protocol can recover the correct loop-mediated interface in 15 out of 16 tested structures, using only a single residue as an anchor.

  20. Virtually-augmented interfaces for tactical aircraft.

    Science.gov (United States)

    Haas, M W

    1995-05-01

    The term Fusion Interface is defined as a class of interface which integrally incorporates both virtual and non-virtual concepts and devices across the visual, auditory and haptic sensory modalities. A fusion interface is a multi-sensory virtually-augmented synthetic environment. A new facility has been developed within the Human Engineering Division of the Armstrong Laboratory dedicated to exploratory development of fusion-interface concepts. One of the virtual concepts to be investigated in the Fusion Interfaces for Tactical Environments facility (FITE) is the application of EEG and other physiological measures for virtual control of functions within the flight environment. FITE is a specialized flight simulator which allows efficient concept development through the use of rapid prototyping followed by direct experience of new fusion concepts. The FITE facility also supports evaluation of fusion concepts by operational fighter pilots in a high fidelity simulated air combat environment. The facility was utilized by a multi-disciplinary team composed of operational pilots, human-factors engineers, electronics engineers, computer scientists, and experimental psychologists to prototype and evaluate the first multi-sensory, virtually-augmented cockpit. The cockpit employed LCD-based head-down displays, a helmet-mounted display, three-dimensionally localized audio displays, and a haptic display. This paper will endeavor to describe the FITE facility architecture, some of the characteristics of the FITE virtual display and control devices, and the potential application of EEG and other physiological measures within the FITE facility.

  1. Interface-induced phenomena in magnetism

    Science.gov (United States)

    Hellman, Frances; Hoffmann, Axel; Tserkovnyak, Yaroslav; Beach, Geoffrey S. D.; Fullerton, Eric E.; Leighton, Chris; MacDonald, Allan H.; Ralph, Daniel C.; Arena, Dario A.; Dürr, Hermann A.; Fischer, Peter; Grollier, Julie; Heremans, Joseph P.; Jungwirth, Tomas; Kimel, Alexey V.; Koopmans, Bert; Krivorotov, Ilya N.; May, Steven J.; Petford-Long, Amanda K.; Rondinelli, James M.; Samarth, Nitin; Schuller, Ivan K.; Slavin, Andrei N.; Stiles, Mark D.; Tchernyshyov, Oleg; Thiaville, André; Zink, Barry L.

    2017-04-01

    This article reviews static and dynamic interfacial effects in magnetism, focusing on interfacially driven magnetic effects and phenomena associated with spin-orbit coupling and intrinsic symmetry breaking at interfaces. It provides a historical background and literature survey, but focuses on recent progress, identifying the most exciting new scientific results and pointing to promising future research directions. It starts with an introduction and overview of how basic magnetic properties are affected by interfaces, then turns to a discussion of charge and spin transport through and near interfaces and how these can be used to control the properties of the magnetic layer. Important concepts include spin accumulation, spin currents, spin-transfer torque, and spin pumping. An overview is provided to the current state of knowledge and existing review literature on interfacial effects such as exchange bias, exchange-spring magnets, the spin Hall effect, oxide heterostructures, and topological insulators. The article highlights recent discoveries of interface-induced magnetism and noncollinear spin textures, nonlinear dynamics including spin-transfer torque and magnetization reversal induced by interfaces, and interfacial effects in ultrafast magnetization processes.

  2. Structural characterization of water-metal interfaces

    Science.gov (United States)

    Ryczko, Kevin; Tamblyn, Isaac

    2017-08-01

    We analyze and compare the structural, dynamical, and electronic properties of liquid water next to prototypical metals including Pt, graphite, and graphene. Our results are built on Born-Oppenheimer molecular dynamics (BOMD) generated using density functional theory (DFT) which explicitly include van der Waals (vdW) interactions within a first principles approach. All calculations reported use large simulation cells, allowing for an accurate treatment of the water-electrode interfaces. We have included vdW interactions through the use of the optB86b-vdW exchange correlation functional. Comparisons with the Perdew-Burke-Ernzerhof (PBE) exchange correlation functional are also shown. We find an initial peak, due to chemisorption, in the density profile of the liquid water-Pt interface not seen in the liquid water-graphite interface, liquid water-graphene interface, nor interfaces studied previously. To further investigate this chemisorption peak, we also report differences in the electronic structure of single water molecules on both Pt and graphite surfaces. We find that a covalent bond forms between the single water molecule and the Pt surface but not between the single water molecule and the graphite surface. We also discuss the effects that defects and dopants in the graphite and graphene surfaces have on the structure and dynamics of liquid water.

  3. INTELLIGENT USER INTERFACE IN FUZZY ENVIRONMENT

    Directory of Open Access Journals (Sweden)

    Ben Khayut

    2014-01-01

    Full Text Available Human-Computer Interaction with the traditional User Interface is done using a specified in advance script dialog “menu”, mainly based on human intellect and unproductive use of navigation. This approach doesn’t lead to making qualitative decision in control systems, where the situations and processes cannot be structured in advance. Any dynamic changes in the controlled business process (as example, in organizational unit of the information fuzzy control system make it necessary to modify the script dialogue in User Interface. This circumstance leads to a redesign of the components of the User Interface and of the entire control system. In the Intelligent User Interface, where the dialog situations are unknown in advance, fuzzy structured and artificial intelligence is crucial, the redesign described above is impossible. To solve this and other problems, we propose the data, information and knowledge based technology of Smart/ Intelligent User Interface (IUI design, which interacts with users and systems in natural and other languages, utilizing the principles of Situational Control and Fuzzy Logic theories, Artificial Intelligence, Linguistics, Knowledge Base technologies and others. The proposed technology of IUI design is defined by multi-agents of a Situational Control and of data, information and knowledge, b modelling of Fuzzy Logic Inference, c Generalization, Representation and Explanation of knowledge, c Planning and Decisionmaking, d Dialog Control, e Reasoning and Systems Thinking, f Fuzzy Control of organizational unit in real-time, fuzzy conditions, heterogeneous domains, and g multi-lingual communication under uncertainty and in Fuzzy Environment.

  4. Genesis and Evolution of Interfaces in Product Architecture

    DEFF Research Database (Denmark)

    Donmez, Mehmet; Hsuan, Juliana

    . In this study, we make one of the initial attempts to define the attributes of interdependencies managed by interfaces, which we call as interface properties, to gain a deeper insight about how interfaces emerge. By relying on secondary case data, we define four interface properties. We discuss the congruence...

  5. A framework of interface improvements for designing new user interfaces for the MANUS robot arm

    NARCIS (Netherlands)

    Tijsma, H.A.; Liefhebber, F.; Herder, J.L.

    2005-01-01

    Users of the MANUS robot arm experience a high cognitive and physical load when performing activities of daily living with the arm. These high loads originate from user interface problems and limitations. To reduce these high loads the user interface of the MANUS needs to be improved. Because large

  6. SWMM5 Application Programming Interface and PySWMM: A Python Interfacing Wrapper

    Science.gov (United States)

    In support of the OpenWaterAnalytics open source initiative, the PySWMM project encompasses the development of a Python interfacing wrapper to SWMM5 with parallel ongoing development of the USEPA Stormwater Management Model (SWMM5) application programming interface (API). ...

  7. More playful user interfaces: interfaces that invite social and physical interaction

    NARCIS (Netherlands)

    Nijholt, Antinus; Unknown, [Unknown

    2015-01-01

    This book covers the latest advances in playful user interfacesinterfaces that invite social and physical interaction. These new developments include the use of audio, visual, tactile and physiological sensors to monitor, provide feedback and anticipate the behavior of human users. The decreasing

  8. A framework of interface improvements for designing new user interfaces for the MANUS robot arm

    NARCIS (Netherlands)

    Tijsma, H.A.; Liefhebber, F.; Herder, J.L.

    2005-01-01

    Users of the MANUS robot arm experience a high cognitive and physical load when performing activities of daily living with the arm. These high loads originate from user interface problems and limitations. To reduce these high loads the user interface of the MANUS needs to be improved. Because large

  9. SWMM5 Application Programming Interface and PySWMM: A Python Interfacing Wrapper

    Science.gov (United States)

    In support of the OpenWaterAnalytics open source initiative, the PySWMM project encompasses the development of a Python interfacing wrapper to SWMM5 with parallel ongoing development of the USEPA Stormwater Management Model (SWMM5) application programming interface (API). ...

  10. More playful user interfaces: interfaces that invite social and physical interaction

    NARCIS (Netherlands)

    Nijholt, Anton

    2015-01-01

    This book covers the latest advances in playful user interfacesinterfaces that invite social and physical interaction. These new developments include the use of audio, visual, tactile and physiological sensors to monitor, provide feedback and anticipate the behavior of human users. The decreasing

  11. Acceleration of stable interface structure searching using a kriging approach

    Science.gov (United States)

    Kiyohara, Shin; Oda, Hiromi; Tsuda, Koji; Mizoguchi, Teruyasu

    2016-04-01

    Crystalline interfaces have a tremendous impact on the properties of materials. Determination of the atomic structure of the interface is crucial for a comprehensive understanding of the interface properties. Despite this importance, extensive calculation is necessary to determine even one interface structure. In this study, we apply a technique called kriging, borrowed from geostatistics, to accelerate the determination of the interface structure. The atomic structure of simplified coincidence-site lattice interfaces were determined using the kriging approach. Our approach successfully determined the most stable interface structure with an efficiency almost 2 orders of magnitude better than the traditional “brute force” approach.

  12. Workshop on surface and interface science at the ESRF

    Energy Technology Data Exchange (ETDEWEB)

    Norris, C.; Stierle, A.; Kasper, N.; Dosch, H.; Schmidt, S.; Hufner, S.; Moritz, W.; Fedley, Ch.S.; Rossi, G.; Durr Hermann, A.; Rohlsberger, R.; Dalmas, J.; Oughaddou, H.; Leandri, Ch.; Gay, J.M.; Treglia, G.; Le Lay, G.; Aufray, B.; Bunk, O.; Johnson, R.L.; Frenken, J.W.M.; Lucas, C.A.; Bauer, G.; Zhong, Z.; Springholz, G.; Lechner, R.; Stang, J.; Schulli, T.; Metzger, T.H.; Holy, V.; Woodruff, D.P.; Dellera, C.; Zegenhagen, J.; Robinson, I.; Malachias, A.; Schulli, T.U.; Magalhaes-Paniago, R.; Stoffel, M.; Schmidt, O.G.; Boragno, C.; Buatier de Mongeot, F.; Valbusa, U.; Felici, R.; Yacoby, Y.; Bedzyk, M.J.; Van der Veen, J.F

    2004-07-01

    The main aim of the workshop is to reflect the future of surface and interface research at the high brilliance synchrotron radiation source ESRF taking into account experimental facilities which are becoming available at new synchrotron radiation facilities in Europe. 6 sessions have been organized: 1) surface and interface research and synchrotron radiation - today and tomorrow -, 2) aspects of surface and interface research, 3) real surfaces and interfaces, 4) synchrotron techniques in surface and interface research, 5) new directions in surface and interface research, and 6) surface and interface science at ESRF. This document gathers the abstracts of the presentations.

  13. A Domain Knowledge Driven Approach for User Interface Software Development

    Institute of Scientific and Technical Information of China (English)

    王海鹰; 刘慎权

    1991-01-01

    A domain knowledge driven user interface development approach is described.As a conceptual design of the user interface,the domain knowledge defines the user interface in terms of objects,actions and their relationships that the user would use to interact with the application system.It also serves as input to a user interface management system (UIMS) and is the kernel of the target user interface.The principal ideas and the implementation techniques of the approach is discussed.The user interface model,user interface designer oriented high-level specification notatiopn,and the transformation algorithms on domain knowledge are presented.

  14. Network device interface for digitally interfacing data channels to a controller a via network

    Science.gov (United States)

    Ellerbrock, Philip J. (Inventor); Grant, Robert L. (Inventor); Konz, Daniel W. (Inventor); Winkelmann, Joseph P. (Inventor)

    2006-01-01

    The present invention provides a network device interface and method for digitally connecting a plurality of data channels to a controller using a network bus. The network device interface interprets commands and data received from the controller and polls the data channels in accordance with these commands. Specifically, the network device interface receives digital commands and data from the controller, and based on these commands and data, communicates with the data channels to either retrieve data in the case of a sensor or send data to activate an actuator. In one embodiment, the bus controller transmits messages to the network device interface containing a plurality of bits having a value defined by a transition between first and second states in the bits. The network device interface determines timing of the data sequence of the message and uses the determined timing to communicate with the bus controller.

  15. Visual interface for space and terrestrial analysis

    Science.gov (United States)

    Dombrowski, Edmund G.; Williams, Jason R.; George, Arthur A.; Heckathorn, Harry M.; Snyder, William A.

    1995-01-01

    The management of large geophysical and celestial data bases is now, more than ever, the most critical path to timely data analysis. With today's large volume data sets from multiple satellite missions, analysts face the task of defining useful data bases from which data and metadata (information about data) can be extracted readily in a meaningful way. Visualization, following an object-oriented design, is a fundamental method of organizing and handling data. Humans, by nature, easily accept pictorial representations of data. Therefore graphically oriented user interfaces are appealing, as long as they remain simple to produce and use. The Visual Interface for Space and Terrestrial Analysis (VISTA) system, currently under development at the Naval Research Laboratory's Backgrounds Data Center (BDC), has been designed with these goals in mind. Its graphical user interface (GUI) allows the user to perform queries, visualization, and analysis of atmospheric and celestial backgrounds data.

  16. Interface matrix method in AFEN framework

    Energy Technology Data Exchange (ETDEWEB)

    Pogosbekyan, Leonid; Cho, Jin Young; Kim, Young Jin [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1997-12-31

    In this study, we extend the application of the interface-matrix(IM) method for reflector modeling to Analytic Flux Expansion Nodal (AFEN) method. This include the modifications of the surface-averaged net current continuity and the net leakage balance conditions for IM method in accordance with AFEN formula. AFEN-interface matrix (AFEN-IM) method has been tested against ZION-1 benchmark problem. The numerical result of AFEN-IM method shows 1.24% of maximum error and 0.42% of root-mean square error in assembly power distribution, and 0.006% {Delta} k of neutron multiplication factor. This result proves that the interface-matrix method for reflector modeling can be useful in AFEN method. 3 refs., 4 figs. (Author)

  17. Marketing-sales interface and organizational competitiveness

    Directory of Open Access Journals (Sweden)

    George J. Avlonitis

    2015-03-01

    Full Text Available This paper focuses on the effectiveness of marketing-sales interfaces in B2B firms. As the body of knowledge on this domain is scarce, there is a greater need to investigate the specific aspects of marketing-sales configurations in such firms. The objective of this paper is to expand existing knowledge regarding marketing-sales interfaces in B2B firms, in order to identify the effectiveness of each configuration. Based on quantitative data collected from marketing or sales managers of 98 B2B firms, the study identifies the most effective marketing-sales interface in terms of smooth relationships and enhanced performance. The implications of the study are discussed.

  18. Cellular nanotechnology: making biological interfaces smarter.

    Science.gov (United States)

    Mendes, Paula M

    2013-12-21

    Recently, there has been an outburst of research on engineered cell-material interfaces driven by nanotechnology and its tools and techniques. This tutorial review begins by providing a brief introduction to nanostructured materials, followed by an overview of the wealth of nanoscale fabrication and analysis tools available for their development. This background serves as the basis for a discussion of early breakthroughs and recent key developments in the endeavour to develop nanostructured materials as smart interfaces for fundamental cellular studies, tissue engineering and regenerative medicine. The review covers three major aspects of nanostructured interfaces - nanotopographical control, dynamic behaviour and intracellular manipulation and sensing - where efforts are continuously being made to further understand cell function and provide new ways to control cell behaviour. A critical reflection of the current status and future challenges are discussed as a conclusion to the review.

  19. Stability of relativistic plasma-vacuum interfaces

    CERN Document Server

    Trakhinin, Yuri

    2010-01-01

    We study the plasma-vacuum interface problem in relativistic magnetohydrodynamics for the case when the plasma density does not go to zero continuously, but jumps. Unlike the nonrelativistic version of this problem, we have to assume that the plasma expands into the vacuum (otherwise, the problem is underdetermined). We show that even if this necessary condition is satisfied the planar interface can be still violently unstable. By using a suitable secondary symmetrization of the Maxwell equations in vacuum, we find a sufficient condition that precludes violent instabilities. Under this condition we derive a basic a priori estimate in the anisotropic weighted Sobolev space $H^1_*$ for the variable coefficients linearized problem for nonplanar plasma-vacuum interfaces and prove the well-posedness of this problem.

  20. Hackable User Interfaces In Astronomy with Glue

    Science.gov (United States)

    Beaumont, C.; Goodman, A.; Greenfield, P.

    2015-09-01

    Astronomers typically choose between Graphical User Interfaces and custom-written computer code when exploring and analyzing data. Few tools are designed to encourage both of these workflows, despite their complementary strengths. We believe that such hybrid hackable user interfaces could enable more agile data exploration, combining the fluidity that comes from a GUI with the precision and reproducibility that comes from writing code. In this article we articulate the different strengths and weaknesses of both workflows and discuss how to enable both in a single tool. We focus on Glue (http://glue-viz.org) as a case study and examine how the goal of creating a hackable user interface has influenced the design of Glue.

  1. Interface definitions in literature: A reality check

    DEFF Research Database (Denmark)

    Parslov, Jakob Filippson; Mortensen, Niels Henrik

    2015-01-01

    on the definition and perception of a product interface within engineering design research which is the objective of this article. A structured literature review of interface definitions found within engineering design literature has been carried out. The different definitions were tabulated against four key issues......Companies that develop multi-technological products are challenged on their ability to obtain high product quality and short development lead times in today’s highly competitive and globalized markets. One of the main reasons for poor product quality is due to unidentified or poorly defined product...... interfaces during the design phase leading to unintended product behavior. In an effort to reduce the lead time and increase quality, companies may apply a modular product architecture, thus enabling parallel development and maturing of modules. Achieving a successful integration of the modules at the end...

  2. Wetting and Roughening of Interfaces with Disorder

    Science.gov (United States)

    Alava, M. J.; Duxbury, P. M.; Seppälä, E. T.

    1997-03-01

    The properties of Ising interfaces change with the introduction of disorder. The roughening and scaling of these ``minimum energy surfaces'' is studied numerically at T=0 using exact optimization techniques. In 3D random-bond systems there is a disorder driven roughening transition for 100 oriented lattices, whereas 111 interfaces are algebraically rough for any non-zero disorder. However, in the 111 case there is an anomalous singular behavior in the parrow 1 limit of random dilution. The wetting of surfaces in the 3-d Ising model depends on whether the bulk interface is rough or (almost) flat. This is analyzed for both complete wetting and for disordered substrates. The results are compared with scaling theory.

  3. The transmission interface constraint problem. Revision

    Energy Technology Data Exchange (ETDEWEB)

    Baldick, R.; Kahn, E.

    1994-10-01

    Electric power transmission systems exhibit a number of complex constraints on their operation and usage. When a network is subject to a constraint that limits the amount of power that can be moved from one region to another, there is said to be an interface limit. The power systems literature gives no general treatment of the engineering-economics of this ubiquitous phenomenon. Particular aspects of interface limits are typically discussed in sophisticated technical detail, but the general engineering-economic trade-offs involved in relieving interface constraints have not been systematically addressed. We approach this problem in the spirit of a heuristic model. Such models are quite valuable under current industry conditions because they delineate technical opportunities and choices in situations where there may be conflicting views among competing parties and regulatory authorities. We organize and enumerate the choices, clarify the practical conditions that dictate the optimum in particular cases, and help to motivate the final choices made by planners.

  4. Fiber-Coupled Diamond Quantum Nanophotonic Interface

    Science.gov (United States)

    Burek, Michael J.; Meuwly, Charles; Evans, Ruffin E.; Bhaskar, Mihir K.; Sipahigil, Alp; Meesala, Srujan; Machielse, Bartholomeus; Sukachev, Denis D.; Nguyen, Christian T.; Pacheco, Jose L.; Bielejec, Edward; Lukin, Mikhail D.; Lončar, Marko

    2017-08-01

    Color centers in diamond provide a promising platform for quantum optics in the solid state, with coherent optical transitions and long-lived electron and nuclear spins. Building upon recent demonstrations of nanophotonic waveguides and optical cavities in single-crystal diamond, we now demonstrate on-chip diamond nanophotonics with a high-efficiency fiber-optical interface achieving >90 % power coupling at visible wavelengths. We use this approach to demonstrate a bright source of narrow-band single photons based on a silicon-vacancy color center embedded within a waveguide-coupled diamond photonic crystal cavity. Our fiber-coupled diamond quantum nanophotonic interface results in a high flux (approximately 38 kHz) of coherent single photons (near Fourier limited at quantum networks that interface multiple emitters, both on chip and separated by long distances.

  5. Electromagnetic Properties of Neutrinos at AN Interface

    Science.gov (United States)

    Ioannisian, A. N.; Ioannisian, D. A.; Kazarian, N. A.

    2013-11-01

    We have calculated the electromagnetic properties of neutrinos at an interface. Particulary, we have measured the transition radiation process by neutrinos ν → νγ at an interface of two media. The medium fulfills the dual purpose of inducing an effective neutrino-photon vertex and of modifying the photon dispersion relation. The transition radiation occurs when at least one of those two quantities have different values in different media. The neutrinos are taken to be with only standard-model couplings and neutrino mass is ignored due to its negligible contribution. We present a result for the probability of the transition radiation which is both accurate and analytic. For example, Eν = 1MeV neutrino crossing polyethylene-vacuum interface the transition radiation probability is about 10-39 and the energy intensity is about 10-34eV. At the surface of the neutron stars the transition radiation probability may be ˜ 10-20.

  6. Orbital angular momentum photonic quantum interface

    CERN Document Server

    Li, Yan; Ding, Dong-Sheng; Zhang, Wei; Shi, Shuai; Shi, Bao-Sen; Guo, Guang-Can

    2014-01-01

    High dimensional orbital angular momentum (OAM) light states are very important in enhancing the information carrying capacity in optical communications and quantum key distributions. Light at wavelengths of fiber communication windows or free space communication windows are suitable for long distance quantum communication, but most quantum processing tasks are performed in the visible wavelength ranges. The interface to bridge the wavelength gap of single photon with Gaussian shape has been realized, however, to create such interface for OAM-carrying light is a great challenge. We report the demonstration of such an interface to frequency up-conversion of herald single photon OAM state from 1560nm to 525nm with high efficiency by using nonlinear crystal in an external cavity. We show that different single photon OAM light shapes are observed directly by using single photon counting camera and the single photon entangled property is retained in the conversion process.

  7. Orbital angular momentum photonic quantum interface

    Institute of Scientific and Technical Information of China (English)

    Zhi-Yuan Zhou; Yan Li; Dong-Sheng Ding; Wei Zhang; Shuai Shi; Bao-Sen Shi; Guang-Can Guo

    2016-01-01

    Light-carrying orbital angular momentum (OAM) has great potential in enhancing the information channel capacity in both classical and quantum optical communications.Long distance optical communication requires the wavelengths of light are situated in the low-loss communication windows,but most quantum memories currently being developed for use in a quantum repeater work at different wavelengths,so a quantum interface to bridge the wavelength gap is necessary.So far,such an interface for OAM-carried light has not been realized yet.Here,we report the first experimental realization of a quantum interface for a heralded single photon carrying OAM using a nonlinear crystal in an optical cavity.The spatial structures of input and output photons exhibit strong similarity.More importantly,single-photon coherence is preserved during up-conversion as demonstrated.

  8. Autonomic html interface generator for web applications

    CERN Document Server

    Bassil, Youssef; 10.5121/ijwest.2012.3104

    2012-01-01

    Recent advances in computing systems have led to a new digital era in which every area of life is nearly interrelated with information technology. However, with the trend towards large-scale IT systems, a new challenge has emerged. The complexity of IT systems is becoming an obstacle that hampers the manageability, operability, and maintainability of modern computing infrastructures. Autonomic computing popped up to provide an answer to these ever-growing pitfalls. Fundamentally, autonomic systems are self-configuring, self-healing, self-optimizing, and self-protecting; hence, they can automate all complex IT processes without human intervention. This paper proposes an autonomic HTML web-interface generator based on XML Schema and Style Sheet specifications for self-configuring graphical user interfaces of web applications. The goal of this autonomic generator is to automate the process of customizing GUI web-interfaces according to the ever-changing business rules, policies, and operating environment with th...

  9. A computational method for sharp interface advection

    DEFF Research Database (Denmark)

    Roenby, Johan; Bredmose, Henrik; Jasak, Hrvoje

    2016-01-01

    We devise a numerical method for passive advection of a surface, such as the interface between two incompressible fluids, across a computational mesh. The method is called isoAdvector, and is developed for general meshes consisting of arbitrary polyhedral cells. The algorithm is based on the volume...... of fluid (VOF) idea of calculating the volume of one of the fluids transported across the mesh faces during a time step. The novelty of the isoAdvector concept consists of two parts. First, we exploit an isosurface concept for modelling the interface inside cells in a geometric surface reconstruction step....... Second, from the reconstructed surface, we model the motion of the face–interface intersection line for a general polygonal face to obtain the time evolution within a time step of the submerged face area. Integrating this submerged area over the time step leads to an accurate estimate for the total...

  10. MTVis: tree exploration using a multitouch interface

    Science.gov (United States)

    Andrews, David; Teoh, Soon Tee

    2010-01-01

    We present MTVis, a multi-touch interactive tree visualization system. The multi-touch interface display hardware is built using the LED-LP technology, and the tree layout is based on RINGS, but enhanced with multitouch interactions. We describe the features of the system, and how the multi-touch interface enhances the user's experience in exploring the tree data structure. In particular, the multi-touch interface allows the user to simultaneously control two child nodes of the root, and rotate them so that some nodes are magnified, while preserving the layout of the tree. We also describe the other meaninful touch screen gestures the users can use to intuitively explore the tree.

  11. Dynamic actuation using nano-bio interfaces

    Directory of Open Access Journals (Sweden)

    Ian Y. Wong

    2010-06-01

    Full Text Available The nanoscale dimensions, sensitive electronic control, and flexible architecture of new generations of nanomaterials and nanofabrication techniques hold immense promise not only for electronic devices, but also biological interfaces. As the size scales of these materials approach biological species, interfaces with characteristics designed to emulate their nanoscale biological counterparts are becoming possible. These new systems have higher biocompatibility, functionality, and lower cell toxicity than their microscale predecessors. While stellar examples have been demonstrated for biomolecular detection and imaging, exciting new possibilities for long-term integration and dynamic stimulation are now emerging, including protein activation, membrane integration and intracellular delivery. These tailored interfaces may lead to improved regenerative medicine, gene therapy and neural prosthetics.

  12. Solid surfaces, interfaces and thin films

    CERN Document Server

    Lüth, Hans

    2015-01-01

    This book emphasises both experimental and theoretical aspects of surface, interface and thin-film physics. As in previous editions the preparation of surfaces and thin films, their atomic and morphological structure, their vibronic and electronic properties as well as fundamentals of adsorption are treated. Because of their importance in modern information technology and nanostructure research, particular emphasis is paid to electronic surface and interface states, semiconductor space charge layers and heterostructures. A special chapter of the book is devoted to collective phenomena at interfaces and in thin films such as superconductivity and magnetism. The latter topic includes the meanwhile important issues giant magnetoresistance and spin-transfer torque mechanism, both effects being of high interest in information technology. In this new edition, for the first time, the effect of spin-orbit coupling on surface states is treated. In this context the class of the recently detected topological insulators,...

  13. Characterization of silicate/Si(001) interfaces

    Science.gov (United States)

    Copel, M.; Cartier, E.; Narayanan, V.; Reuter, M. C.; Guha, S.; Bojarczuk, N.

    2002-11-01

    Many of the proposed high permittivity gate dielectrics for silicon-based microelectronics rely on a stack configuration, with an SiO2 buffer layer to provide an interface. We describe a means for creating gate dielectrics with a direct yttrium silicate-silicon interface through the solid-state reaction of yttria and silicon oxynitride, avoiding the preparation of an oxide-free silicon surface. Characterization by medium-energy ion scattering indicates complete consumption of the underlying oxide through silicate formation during high-temperature annealing. Furthermore, the silicate dielectric exhibits small flat-band voltage shifts, indicating low quantities of charge, without passivation steps. Creation of a silicate-silicon interfaces by a simple route may enable the study of an alternate class of dielectrics.

  14. Experimental Interfaces Involving Visual Grouping During Browsing

    Directory of Open Access Journals (Sweden)

    Stan Ruecker

    2006-11-01

    Full Text Available This paper provides a brief overview of a number of experimental interface design projects being carried out collaboratively by teams of researchers at the University of Alberta and elsewhere. One goal of this interface research is to explore the principles of rich-prospect browsing interfaces, which I have defined (Author 2003 as those where some meaningful representation of every item in a collection is combined with tools for manipulating the display. Often this manipulation is for the purposes of carrying out some portion of a research task: the interfaces lend themselves to exploratory and synthetic activities, such as knowledge discovery and hypothesis formulation. The projects summarized here begin with a browsing prototype originally designed for the task of pill identification (Given et al. 2005 but subsequently extended into a prototype for browsing conference delegates and other groups of people (Author et al. 2006. Another is a nuanced system based on the mandala (Cheypesh et al. 2006 intended for examining any collection that has been encoded with an XML schema, using combinations of attractors selected by the user from the available tags. Next is the set of specialized interfaces for the Orlando Project (Orlando Team 2006, intended to provide a set of discrete entry points into the deeply-encoded electronic history of women’s writing in the British Isles. Our project on tabular interfaces provides a variety of spaces designed to assist the user in using thesauri for multilingual query enhancement (Anvik et al. 2006. The final project described below is NORA (Unsworth 2004, which relies on the power of the D2K data-mining tools at the National Centre for Supercomputing Applications at the University of Illinois at Urbana-Champaign to give humanities scholars a workspace for exploring the system-identified features of common documents and further documents that have been recommended by the system. Each of these projects are

  15. Type Variability and Completeness of Interfaces in Java Applications

    OpenAIRE

    Hani Abdeen; Osama Shata

    2014-01-01

    Interfaces are widely used as central design elements of Java applications. Although interfaces are abstract types similar to abstract classes, the usage of interfaces in Java applications may considerably differ from the usage of abstract classes. Unlike abstract classes, interfaces are meant to enable multiple inheritance in Java programs. Hence, interfaces are meant to encode shared similarities between classes belonging to different class -type hierarchies. Therefore, it is frequent to...

  16. SIGMA WEB INTERFACE FOR REACTOR DATA APPLICATIONS

    Energy Technology Data Exchange (ETDEWEB)

    Pritychenko,B.; Sonzogni, A.A.

    2010-05-09

    We present Sigma Web interface which provides user-friendly access for online analysis and plotting of the evaluated and experimental nuclear reaction data stored in the ENDF-6 and EXFOR formats. The interface includes advanced browsing and search capabilities, interactive plots of cross sections, angular distributions and spectra, nubars, comparisons between evaluated and experimental data, computations for cross section data sets, pre-calculated integral quantities, neutron cross section uncertainties plots and visualization of covariance matrices. Sigma is publicly available at the National Nuclear Data Center website at http://www.nndc.bnl.gov/sigma.

  17. Interfacing superconducting qubits and single optical photons

    CERN Document Server

    Das, Sumanta; Sørensen, Anders S

    2016-01-01

    We propose an efficient light-matter interface at optical frequencies between a superconducting qubit and a single photon. The desired interface is based on a hybrid architecture composed of an organic molecule embedded inside an optical waveguide and electrically coupled to a superconducting qubit far from the optical axis. We show that high fidelity, photon-mediated, entanglement between distant superconducting qubits can be achieved with incident pulses at the single photon level. Such low light level is highly sought for to overcome the decoherence of the superconducting qubit caused by absorption of optical photons.

  18. The Gigabit Link Interface Board (GLIB) ecosystem

    CERN Document Server

    Vichoudis, P; Baron, S; Barros Marin, M; Bobillier, V; Chramowitz, J; Haas, S; Hansen, M; Joos, M; Lobato Pardavila, L; Petit, P; Prosser, A; Vasey, F

    2013-01-01

    The Gigabit Link Interface Board (GLIB) project is an FPGA-based platform for users of high-speed optical links in high energy physics experiments. The major hardware component of the platform is the GLIB Advanced Mezzanine Card (AMC). Additionally to the AMC, auxiliary components are developed that enhance GLIB platform's I/O bandwidth and compatibility with legacy and future triggering and/or data acquisition interfaces. This article focuses on the development of the auxiliary components that together with the GLIB AMC offer a complete solution for beam/irradiation tests of detector modules and evaluation of optical links.

  19. A programmable interface to neuromolecular computing networks.

    Science.gov (United States)

    Akingbehin, K

    1995-01-01

    A programmable interface is provided to a simulated network of reaction-diffusion neurons. The interface allows special 'learn' and 'decide' syntactic constructs to be intermixed with conventional programming constructs. This hybrid combination allows the power of programmability to be combined with the power of adaptability to provide innovative solutions to complex problems. The network uses reaction-diffusion neurons instead of adaline neurons. A mesh topology is used instead of a feedforward topology. The performance of the mesh reaction-diffusion network compares favorably with that of conventional feedforward adaline networks. Enhancements to incorporate short- and long-term memory are described.

  20. Asymptotic curved interface models in piezoelectric composites

    Science.gov (United States)

    Serpilli, Michele

    2016-10-01

    We study the electromechanical behavior of a thin interphase, constituted by a piezoelectric anisotropic shell-like thin layer, embedded between two generic three-dimensional piezoelectric bodies by means of the asymptotic analysis in a general curvilinear framework. After defining a small real dimensionless parameter ε, which will tend to zero, we characterize two different limit models and their associated limit problems, the so-called weak and strong piezoelectric curved interface models, respectively. Moreover, we identify the non-classical electromechanical transmission conditions at the interface between the two three-dimensional bodies.

  1. Liferay 6.2 user interface development

    CERN Document Server

    Chen, Xinsheng

    2013-01-01

    A step-by-step tutorial, targeting the Liferay 6.2 version. This book takes a step-by-step approach to customizing the look and feel of your website, and shows you how to build a great looking user interface as well.""Liferay 6.2 User Interface Development"" is for anyone who is interested in the Liferay Portal. It contains text that explicitly introduces you to the Liferay Portal. You will benefit most from this book if you have Java programming experience and have coded servlets or JavaServer Pages before. Experienced Liferay portal developers will also find this book useful because it expla

  2. Sketch-based Interfaces and Modeling

    CERN Document Server

    Jorge, Joaquim

    2011-01-01

    The field of sketch-based interfaces and modeling (SBIM) is concerned with developing methods and techniques to enable users to interact with a computer through sketching - a simple, yet highly expressive medium. SBIM blends concepts from computer graphics, human-computer interaction, artificial intelligence, and machine learning. Recent improvements in hardware, coupled with new machine learning techniques for more accurate recognition, and more robust depth inferencing techniques for sketch-based modeling, have resulted in an explosion of both sketch-based interfaces and pen-based computing

  3. Interface design in the process industries

    Science.gov (United States)

    Beaverstock, M. C.; Stassen, H. G.; Williamson, R. A.

    1977-01-01

    Every operator runs his plant in accord with his own mental model of the process. In this sense, one characteristic of an ideal man-machine interface is that it be in harmony with that model. With this theme in mind, the paper first reviews the functions of the process operator and compares them with human operators involved in control situations previously studied outside the industrial environment (pilots, air traffic controllers, helmsmen, etc.). A brief history of the operator interface in the process industry and the traditional methodology employed in its design is then presented. Finally, a much more fundamental approach utilizing a model definition of the human operator's behavior is presented.

  4. The Ideal Voting Interface: Classifying Usability

    Directory of Open Access Journals (Sweden)

    Damien Mac Namara

    2014-12-01

    Full Text Available This work presents a feature-oriented taxonomy for commercial electronic voting machines, which focuses on usability aspects. Based on this analysis, we propose a ‘Just-Like-Paper’  (JLP classification method which identifies five broad categories of eVoting interface. We extend the classification to investigate its application as an indicator of voting efficiency and identify a universal ten-step process encompassing all possible voting steps spanning the twenty-six machines studied. Our analysis concludes that multi-functional and progressive interfaces are likely to be more efficient versus multi-modal voter-activated machines.

  5. Fluctuations at Electrode-YSZ Interfaces

    DEFF Research Database (Denmark)

    Jacobsen, Torben; Hansen, Karin Vels; Skou, Eivind

    of the damping by the large interface. Fig.\\,1 shows a slow potential sweep on a Pt point electrode on a YSZ surface. For the part of the anodic and the cathodic branches where the electrode approaches equilibrium, quadratic expressions are used as smooth approximations for the current -- overvoltage relation...... in D/A converters, duty cycles of thermo regulators, etc. But even so, the dramatic spikes seen at the Ni anode emphasizes the care that must be taken in order to obtain reproducible results from point electrode studies. However, it is noted that Pt cathodes and Ni anodes show reverse patterns...... property of the interface. \

  6. Dynamics of the YSZ-Pt Interface

    DEFF Research Database (Denmark)

    Bay, Lasse; Jacobsen, Torben

    1997-01-01

    Yttria stabilized zirconia (YSZ)-Pt point electrodes were examined by linear potential sweep, potential step and impedance measurements at 1000 degrees C in air. Inductive loops and hysteresis phenomena with long relaxation times were found. Atomic force microscopy showed changes of the interface...... between Pt and YSZ induced by the current passage. These changes involve transport of solid and are slow enough to explain the large time constants. The low frequency capacitance and inductive loop forming an entire circle indicate the presence of gas reservoirs at the YSZ-Pt interface....

  7. Photovoltaics module interface: General purpose primers

    Science.gov (United States)

    Boerio, J.

    1985-01-01

    The interfacial chemistry established between ethylene vinyl acetate (EVA) and the aluminized back surface of commercial solar cells was observed experimentally. The technique employed is called Fourier Transform Infrared (FTIR) spectroscopy, with the infrared signal being reflected back from the aluminum surface through the EVA film. Reflection infrared (IR) spectra are given and attention is drawn to the specific IR peak at 1080/cm which forms on hydrolytic aging of the EVA/aluminum system. With this fundamental finding, and the workable experimental techniques, candidate silane coupling agents are employed at the interface, and their effects on eliminating or slowing hydrolytic aging of the EVA/aluminum interface are monitored.

  8. Intelligent thermal imaging camera with network interface

    Science.gov (United States)

    Sielewicz, Krzysztof M.; Kasprowicz, Grzegorz; Poźniak, Krzysztof T.; Romaniuk, R. S.

    2011-10-01

    In recent years, a significant increase in usage of thermal imagining cameras can be observed in both public and commercial sector, due to the lower cost and expanding availability of uncooled microbolometer infrared radiation detectors. Devices present on the market vary in their parameters and output interfaces. However, all these thermographic cameras are only a source of an image, which is then analyzed in external image processing unit. There is no possibility to run users dedicated image processing algorithms by thermal imaging camera itself. This paper presents a concept of realization, architecture and hardware implementation of "Intelligent thermal imaging camera with network interface" utilizing modern technologies, standards and approach in one single device.

  9. Pen-and-Paper User Interfaces

    CERN Document Server

    Steimle, Jurgen

    2012-01-01

    Even at the beginning of the 21st century, we are far from becoming paperless. Pen and paper is still the only truly ubiquitous information processing technology. Pen-and-paper user interfaces bridge the gap between paper and the digital world. Rather than replacing paper with electronic media, they seamlessly integrate both worlds in a hybrid user interface. Classical paper documents become interactive. This opens up a huge field of novel computer applications at our workplaces and in our homes. This book provides readers with a broad and extensive overview of the field, so as to provide a fu

  10. Principles of interfacing computers to medical equipment.

    Science.gov (United States)

    Francis, J L; Martin, T R

    1990-12-01

    Table 3 shows a comparison of the interface standards considered. RS232 has the advantages of availability, flexibility and low cost. Variants on the standard overcome its limitations in data-rate and distance. The Centronics parallel standard is available on most personal computers and is particularly suitable for high data-rates over short distances. Other PC standards such as SCSI are special-purpose interfaces and therefore more difficult to use. GPIB is a robust and well-specified standard often used for the control of laboratory instruments.

  11. Research interface on a programmable ultrasound scanner.

    Science.gov (United States)

    Shamdasani, Vijay; Bae, Unmin; Sikdar, Siddhartha; Yoo, Yang Mo; Karadayi, Kerem; Managuli, Ravi; Kim, Yongmin

    2008-07-01

    Commercial ultrasound machines in the past did not provide the ultrasound researchers access to raw ultrasound data. Lack of this ability has impeded evaluation and clinical testing of novel ultrasound algorithms and applications. Recently, we developed a flexible ultrasound back-end where all the processing for the conventional ultrasound modes, such as B, M, color flow and spectral Doppler, was performed in software. The back-end has been incorporated into a commercial ultrasound machine, the Hitachi HiVision 5500. The goal of this work is to develop an ultrasound research interface on the back-end for acquiring raw ultrasound data from the machine. The research interface has been designed as a software module on the ultrasound back-end. To increase the amount of raw ultrasound data that can be spooled in the limited memory available on the back-end, we have developed a method that can losslessly compress the ultrasound data in real time. The raw ultrasound data could be obtained in any conventional ultrasound mode, including duplex and triplex modes. Furthermore, use of the research interface does not decrease the frame rate or otherwise affect the clinical usability of the machine. The lossless compression of the ultrasound data in real time can increase the amount of data spooled by approximately 2.3 times, thus allowing more than 6s of raw ultrasound data to be acquired in all the modes. The interface has been used not only for early testing of new ideas with in vitro data from phantoms, but also for acquiring in vivo data for fine-tuning ultrasound applications and conducting clinical studies. We present several examples of how newer ultrasound applications, such as elastography, vibration imaging and 3D imaging, have benefited from this research interface. Since the research interface is entirely implemented in software, it can be deployed on existing HiVision 5500 ultrasound machines and may be easily upgraded in the future. The developed research

  12. The SENSEI Generic In Situ Interface

    Energy Technology Data Exchange (ETDEWEB)

    Ayachit, Utkarsh [Kitware, Inc., Clifton Park, NY (United States); Whitlock, Brad [Intelligent Light, Rutherford, NJ (United States); Wolf, Matthew [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Loring, Burlen [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Geveci, Berk [Kitware, Inc., Clifton Park, NY (United States); Lonie, David [Kitware, Inc., Clifton Park, NY (United States); Bethel, E. Wes [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2017-04-11

    The SENSEI generic in situ interface is an API that promotes code portability and reusability. From the simulation view, a developer can instrument their code with the SENSEI API and then make make use of any number of in situ infrastructures. From the method view, a developer can write an in situ method using the SENSEI API, then expect it to run in any number of in situ infrastructures, or be invoked directly from a simulation code, with little or no modification. This paper presents the design principles underlying the SENSEI generic interface, along with some simplified coding examples.

  13. Neologisms: mapping interface areas in information science

    Directory of Open Access Journals (Sweden)

    Jéssica Câmara Siqueira

    2015-02-01

    Full Text Available The research analyzes neologisms in Information Science using the terminology approach to verify the interface areas that corroborate the scope of Information Science. The work is based on qualitative analysis of neologisms selected in the five top-ranked journals in Qualis/CAPES in the last decade. The exclusion corpus consisted in lexicographical works and from the BRAPCI (Base de Pesquisa em Ciência da Informação. The mapping of interface areas from the delimitation of the contexts of terminological neologisms allows the identification of interstitial relations among the fields of Information Science.

  14. Observations of a monotectic solidification interface morphology

    Science.gov (United States)

    Kaukler, W. F.; Frazier, D. O.

    1985-01-01

    For detailed studies of the region around a solidification interface on a microscopic scale, a very thin (essentially two-dimensional) test cell may be translated across two temperature-controlled heating/cooling blocks and viewed with a microscope. Such a device is sometimes referred to as a temperature gradient microscope stage (TGS). Of particular interest in this study is the behavior of a monotectic type solution during solidification. Succinonitrile based model systems for metallic monotectic alloys, when solidified on a TGS, form an unusual 'worm-like' micromorphology. These interfaces are observable in situ under high optical magnification during growth.

  15. User interface design of electronic appliances

    CERN Document Server

    Baumann, Konrad

    2002-01-01

    Foreword by Brenda Laurel. Part One: Introduction 1. Background, Bruce Thomas 2. Introduction, Konrad Baumann 3. The Interaction Design Process, Georg Rakers Part Two: User Interface Design 4. Creativity Techniques, Irene Mavrommati 5. Design Principals, Irene Mavrommati and Adrian Martel 6. Design of On-Screen Interfaces, Irene Mavrommati Part Three: Input Devices 7. Controls, Konrad Baumann 8. Keyboards, Konrad Baumann 9. Advanced Interaction Techniques, Christopher Baber and Konrad Baumann 10. Speech Control, Christopher Baber and Jan Noyes 11. Wearable Computers, Christopher Baber Part Fou

  16. GRIZZLY/FAVOR Interface Project Report

    Energy Technology Data Exchange (ETDEWEB)

    Dickson, Terry L [ORNL; Williams, Paul T [ORNL; Yin, Shengjun [ORNL; Klasky, Hilda B [ORNL; Tadinada, Sashi [ORNL; Bass, Bennett Richard [ORNL

    2013-06-01

    As part of the Light Water Reactor Sustainability (LWRS) Program, the objective of the GRIZZLY/FAVOR Interface project is to create the capability to apply GRIZZLY 3-D finite element (thermal and stress) analysis results as input to FAVOR probabilistic fracture mechanics (PFM) analyses. The one benefit of FAVOR to Grizzly is the PROBABILISTIC capability. This document describes the implementation of the GRIZZLY/FAVOR Interface, the preliminary verification and tests results and a user guide that provides detailed step-by-step instructions to run the program.

  17. Model driven development of user interface prototypes

    DEFF Research Database (Denmark)

    Störrle, Harald

    2010-01-01

    Many approaches to interface development apply only to isolated aspects of the development of user interfaces (UIs), e.g., exploration during the early phases, design of visual appearance, or implementation in some technology. In this paper we explore an _integrated_ approach to incorporate...... groups like graphic designers and software developers by integrating traditional pen-and-paper based methods with contemporary MDA-based CASE tools. We have implemented our approach in the Advanced Interaction Design Environemnt (AIDE), an application to support WEDs....

  18. Programming Graphical User Interfaces in R

    CERN Document Server

    Verzani, John

    2012-01-01

    Programming Graphical User Interfaces with R introduces each of the major R packages for GUI programming: RGtk2, qtbase, Tcl/Tk, and gWidgets. With examples woven through the text as well as stand-alone demonstrations of simple yet reasonably complete applications, the book features topics especially relevant to statisticians who aim to provide a practical interface to functionality implemented in R. The book offers: A how-to guide for developing GUIs within R The fundamentals for users with limited knowledge of programming within R and other languages GUI design for specific functions or as l

  19. Fiscal 1997 R and D project on industrial science and technology under a consignment from NEDO. R and D of the superconducting material and device (technical development of the Josephson device hybrid system); 1997 nendo sangyo kagaku gijutsu kenkyu kaihatsu jigyo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku. Chodendo zairyo chodendo soshi no kenkyu kaihatsu (Josephson soshi hybrid system no gijutsu kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In order to establish basic technology for hybrid systems of superconducting and semiconducting devices, study was made on ultrahigh speed and low energy consumption properties of Josephson devices. As Josephson IC technology, a logical circuit, ring network, memory circuit, and oxide superconductor logical circuit were studied. As superconducting hybrid system technology, a Josephson device- semiconductor device interface, formation technology of signal transmission lines, and Josephson-MOS IC technology were developed. In fiscal 1997, as Josephson IC technology, switch motion of 4GHz in clock frequency was achieved by new high-density wiring process. Integration of some semiconducting processor elements, junction of surface- stabilized superconducting thin films, and motion of combination structure of some SQUIDs were also confirmed. On the hybrid system, voltage conversion operation of all interfaces was confirmed. Proper logical operation of the Josephson device hybrid circuit was also confirmed. 95 refs., 90 figs., 5 tabs.

  20. Interfaces Select Specific Stereochemical Conformations: The Isomerization of Glyoxal at the Liquid Water Interface.

    Science.gov (United States)

    Zhu, Chongqin; Kais, Sabre; Zeng, Xiao Cheng; Francisco, Joseph S; Gladich, Ivan

    2017-01-11

    Interfacial chemistry involving glyoxal at aerosol surfaces is postulated to catalyze aerosol growth. This chemistry remains speculative due to a lack of detailed information concerning the physicochemical behavior of glyoxal at the interface of atmospheric aerosols. Here, we report results from high-level electronic structure calculations as well as both classical and Born-Oppenheimer ab initio molecular dynamics simulations of glyoxal solvation at the air/liquid water interface. When compared to the gas phase, the trans to cis isomerization of glyoxal at the liquid water interface is found to be catalyzed; additionally, the trans conformation is selectively solvated within the bulk to a greater degree than is the cis conformation. These two processes, i.e., the catalytic effect at the water interface and the differentially selective solvation, act to enhance the concentration of the cis isomer of glyoxal at the water interface. This has important consequences for the interpretation of experiments and for the modeling of glyoxal chemistry both at the interface of water clouds and at aerosols. Broader implications of this work relate to describing the role of interfaces in selecting specific stereo molecular structures at interfacial environments.

  1. Electrochemical impedance spectroscopy for quantitative interface state characterization of planar and nanostructured semiconductor-dielectric interfaces

    Science.gov (United States)

    Meng, Andrew C.; Tang, Kechao; Braun, Michael R.; Zhang, Liangliang; McIntyre, Paul C.

    2017-10-01

    The performance of nanostructured semiconductors is frequently limited by interface defects that trap electronic carriers. In particular, high aspect ratio geometries dramatically increase the difficulty of using typical solid-state electrical measurements (multifrequency capacitance- and conductance-voltage testing) to quantify interface trap densities (D it). We report on electrochemical impedance spectroscopy (EIS) to characterize the energy distribution of interface traps at metal oxide/semiconductor interfaces. This method takes advantage of liquid electrolytes, which provide conformal electrical contacts. Planar Al2O3/p-Si and Al2O3/p-Si0.55Ge0.45 interfaces are used to benchmark the EIS data against results obtained from standard electrical testing methods. We find that the solid state and EIS data agree very well, leading to the extraction of consistent D it energy distributions. Measurements carried out on pyramid-nanostructured p-Si obtained by KOH etching followed by deposition of a 10 nm ALD-Al2O3 demonstrate the application of EIS to trap characterization of a nanostructured dielectric/semiconductor interface. These results show the promise of this methodology to measure interface state densities for a broad range of semiconductor nanostructures such as nanowires, nanofins, and porous structures.

  2. Solid-Liquid Interface Characterization Hardware

    Science.gov (United States)

    Peters, Palmer N.

    2000-01-01

    The objective is to develop enabling technology to characterize the solid-liquid interface during directional solidification to unprecedented levels with real-time measurement hardware. Existing x-ray imaging hardware is combined with compact Seebeck furnaces and thermal profiling hardware, under development, to accomplish the measurements. Furnace thermal profiles are continuously measured in addition to the sample characteristics.

  3. Redox chemistry at liquid/liquid interfaces

    Science.gov (United States)

    Volkov, A. G.; Deamer, D. W.

    1997-01-01

    The interface between two immiscible liquids with immobilized photosynthetic pigments can serve as the simplest model of a biological membrane convenient for the investigation of photoprocesses accompanied by spatial separation of charges. As it follows from thermodynamics, if the resolvation energies of substrates and products are very different, the interface between two immiscible liquids may act as a catalyst. Theoretical aspects of charge transfer reactions at oil/water interfaces are discussed. Conditions under which the free energy of activation of the interfacial reaction of electron transfer decreases are established. The activation energy of electron transfer depends on the charges of the reactants and dielectric permittivity of the non-aqueous phase. This can be useful when choosing a pair of immiscible solvents to decrease the activation energy of the reaction in question or to inhibit an undesired process. Experimental interfacial catalytic systems are discussed. Amphiphilic molecules such as chlorophyll or porphyrins were studied as catalysts of electron transfer reactions at the oil/water interface.

  4. Experiencing Brain-Computer Interface Control

    NARCIS (Netherlands)

    Laar, van de B.L.A.

    2016-01-01

    Brain-Computer Interfaces (BCIs) are systems that extract information from the user’s brain activity and employ it in some way in an interactive system. While historically BCIs were mainly catered towards paralyzed or otherwise physically handicapped users, the last couple of years applications with

  5. PLM floating-point interface program

    Energy Technology Data Exchange (ETDEWEB)

    Paoni, C.; Maples, M.

    1976-03-03

    A major failing of Intel's PLM language is its inability to handle scientific notation (floating-point) calculations. An interface program that allows PLM to perform such calculations is described. A comparison of this modified PLM with an assembly language program has shown PLM's effectiveness in reducing the cost of a project. (auth)

  6. ASC-PROBA Interface Control Document

    DEFF Research Database (Denmark)

    Betto, Maurizio; Jørgensen, John Leif; Jørgensen, Finn E;

    1999-01-01

    This document describes the Advanced Stellar Compass (ASC) and defines the interfaces between the instrument and the PROBA satellite. The ASC is a highly advanced and autonomous Stellar Reference Unit designed, developed and produced by the Space Instrumentation Group of the Department of Automat...

  7. Dynamics of Complex Fluid-Fluid Interfaces

    NARCIS (Netherlands)

    Sagis, L.M.C.

    2016-01-01

    This chapter presents an overview of recent progress in modelling the behaviour of complex fluid–fluid interfaces with non-equilibrium thermodynamics. We will limit ourselves to frameworks employing the Gibbs dividing surface model, and start with a general discussion of the surface excess variables

  8. Affective Brain-Computer Interfaces: Preface

    NARCIS (Netherlands)

    Mühl, Christian; Heylen, Dirk; Nijholt, Anton; Mühl, Christian; Heylen, Dirk; Nijholt, Anton

    2009-01-01

    These are the proceedings of ABCI 2009, Affective Brain Computer Interfaces, a workshop that was organized in conjunction with ACII 2009, the International Conference on Affective Computation and Intelligent Interaction, held in Amsterdam, The Netherlands, September 2009. The workshop took place on

  9. The Brain-Computer Interface Cycle

    NARCIS (Netherlands)

    Gerven, Marcel; Farquhar, Jason; Schaefer, Rebecca; Vlek, Rutger; Geuze, Jeroen; Nijholt, Antinus; Ramsay, Nick; Haselager, Pim; Vuurpijl, Louis; Gielen, Stan; Desain, Peter

    2009-01-01

    Brain–computer interfaces (BCIs) have attracted much attention recently, triggered by new scientific progress in understanding brain function and by impressive applications. The aim of this review is to give an overview of the various steps in the BCI cycle, i.e., the loop from the measurement of

  10. Interfaces Visualize Data for Airline Safety, Efficiency

    Science.gov (United States)

    2014-01-01

    As the A-Train Constellation orbits Earth to gather data, NASA scientists and partners visualize, analyze, and communicate the information. To this end, Langley Research Center awarded SBIR funding to Fairfax, Virginia-based WxAnalyst Ltd. to refine the company's existing user interface for Google Earth to visualize data. Hawaiian Airlines is now using the technology to help manage its flights.

  11. Flash Builder customizing the user interface

    CERN Document Server

    Rocchi, Cesare

    2010-01-01

    Personalize user interface components of your projects. Example projects are grouped together in an AIR application and the appearance is totally customized. Learn how to change visual properties by means of style directives or create brand new skins by knowing and exploiting their internal architecture.

  12. Chemical physics of water-water interfaces

    NARCIS (Netherlands)

    Vis, Mark; Erné, Ben H; Tromp, Robert H

    2016-01-01

    A brief review is given on recent progress in experimental and theoretical investigations of the interface between coexisting aqueous phases of biopolymers. The experimental aspects are introduced using results obtained from a model system consisting of aqueous mixtures of nongelling gelatin and dex

  13. Environmental Interfaces in Teaching Economic Statistics

    Science.gov (United States)

    Campos, Celso; Wodewotzki, Maria Lucia; Jacobini, Otavio; Ferrira, Denise

    2016-01-01

    The objective of this article is, based on the Critical Statistics Education assumptions, to value some environmental interfaces in teaching Statistics by modeling projects. Due to this, we present a practical case, one in which we address an environmental issue, placed in the context of the teaching of index numbers, within the Statistics…

  14. Disjoint forms in graphical user interfaces

    NARCIS (Netherlands)

    Evers, S.; Achten, P.M.; Plasmeijer, M.J.; Loidl, H.W.

    2006-01-01

    Forms are parts of a graphical user interface (GUI) that show a set of values and allow the user to update them. The declarative form construction library FunctionalForms is extended with disjoint form combinators to capture some common patterns in which the form structure expresses a choice. We dem

  15. Complex coacervates formed across liquid interfaces

    NARCIS (Netherlands)

    Monteillet, H.; Kleijn, J.M.; Sprakel, J.; Leermakers, F.A.M.

    2016-01-01

    The Scheutjens-Fleer self-consistent field (SF-SCF) theory is used to study complexation between two oppositely charged polyelectrolytes across an interface formed by two solvents, here called oil and water. The focus is on the composition and the lateral stability of such interfacial coacervate.

  16. Unconventional superconductivity induced by interfaces and surfaces

    Energy Technology Data Exchange (ETDEWEB)

    Eschrig, Matthias [Institut fuer Theoretische Festkoerperphysik and DFG-Center for Functional Nanostructures, Universitaet Karlsruhe (Germany)

    2009-07-01

    Ordered many-body states in solids are often characterized by an order parameter that breaks one or more of the symmetries of the crystal. Such unconventional states lead to interesting new physics associated with the spontaneously broken symmetries. However, in order that such a symmetry breaking can occur it has to be energetically favored. Some of the most interesting symmetry broken states have never been found experimentally in bulk materials for that reason. However, symmetries can be broken also by introducing interfaces with other materials. In this case, the evasive unconventional states might be induced locally near the interface, and can then penetrate as correlations into bulk materials. The properties of the induced states depend on the scattering characteristics of the interfaces and on the proximity induced states produced by the adjacent materials. We discuss in particular interface-induced unconventional superconductivity in heterostructures with magnetically active materials, that may exhibit e.g. odd-frequency pairing or equal-spin triplet pairing states. We study the conditions under which such unconventional pairing amplitudes are induced and demonstrate how they can be tested in experiment and used for quantum devices.

  17. Speech-Song Interface of Chinese Speakers

    Science.gov (United States)

    Mang, Esther

    2007-01-01

    Pitch is a psychoacoustic construct crucial in the production and perception of speech and songs. This article is an exploration of the interface of speech and song performance of Chinese speakers. Although parallels might be drawn from the prosodic and sound structures of the linguistic and musical systems, perceiving and producing speech and…

  18. A Design Approach for Tangible User Interfaces

    Directory of Open Access Journals (Sweden)

    Bernard Champoux

    2004-05-01

    Full Text Available This paper proposes a mechanism to design Tangible User Interface (TUI based on Alexander’s (1964 design approach i.e. achieving fitness between the form and its context. Adapted to the design of TUIs, the fitness-of-use mechanism now takes into consideration the potential conflicts between the hardware of the artifact (electro-mechanical components and the form of the user’s control (Physical-ergonomics. The design problem is a search for an effortless co-existence (fitness-of-use between these two aspects. Tangible interface design differs from traditional graphical interface design as unsolved conflicts between hardware and ergonomics can deeply affect the desired interaction. Here we propose a mechanism (in the form of eight questions that support the design by defining the boundaries of the task, orienting the hardware (electro-mechanics and ergonomics of the design space for various sub-tasks and finally fitting the different components of the hardware and physical-ergonomics of the artefact to provide a component level fitness which will delineate the final tangible interfaces. We further evaluate the effectiveness and efficiency of our approach by quantitative user evaluation

  19. Development of the User-Computer Interface.

    Science.gov (United States)

    McCann, Patrick H.

    1983-01-01

    Discusses the design and development of the user-computer interface in terms of the personal computer user's psychological needs and physical, perceptual, and conceptual contact with the system. Principles for the development of a user-system dialog that meets the requirements of transparency and visibility are suggested. Twenty-six references are…

  20. More playful user interfaces: an introduction

    NARCIS (Netherlands)

    Unknown, [Unknown; Nijholt, A.; Nijholt, Antinus

    2015-01-01

    In this chapter we embed recent research advances in creating playful user interfaces in a historical context. We have observations on spending leisure time, in particular predictions from previous decades and views expressed in Science Fiction novels. We confront these views and predictions with

  1. Research Notes Openness and Evolvability Interface Assessment

    Science.gov (United States)

    2016-08-01

    Are configuration management controls sufficient? .......................... 3 2.1.6 Is test harness or reference implementation available to...2.1.1 Is custodian also vendor of production implementation? Does the same organisation that is responsible for maintaining the interface specification...be acceptable if implementing sensitive components for military use. 2.1.5 Are configuration management controls sufficient? Are the configuration

  2. More playful user interfaces: an introduction

    NARCIS (Netherlands)

    Nijholt, Anton; Nijholt, Anton

    2015-01-01

    In this chapter we embed recent research advances in creating playful user interfaces in a historical context. We have observations on spending leisure time, in particular predictions from previous decades and views expressed in Science Fiction novels. We confront these views and predictions with wh

  3. User Interface Design for Military AR Applications

    Science.gov (United States)

    2010-12-12

    SI: AUGMENTED REALITY User interface design for military AR applications Mark A. Livingston • Zhuming Ai • Kevin Karsch • Gregory O. Gibson Received...several visual representations fundamental to SA. The UI M. A. Livingston (&) Z. Ai K. Karsch G. O. Gibson Naval Research Laboratory, Washington

  4. On user behaviour adaptation under interface change

    CSIR Research Space (South Africa)

    Rosman, Benjamin S

    2014-02-01

    Full Text Available tasks. Realistic users arrive at evaluations of efficiency, hence making choices about which interface to use, over time, based on trial and error experience. Their choices are also determined by prior experience, which determines how much learning time...

  5. Adaptive interface for personalizing information seeking.

    Science.gov (United States)

    Narayanan, S; Koppaka, Lavanya; Edala, Narasimha; Loritz, Don; Daley, Raymond

    2004-12-01

    An adaptive interface autonomously adjusts its display and available actions to current goals and abilities of the user by assessing user status, system task, and the context. Knowledge content adaptability is needed for knowledge acquisition and refinement tasks. In the case of knowledge content adaptability, the requirements of interface design focus on the elicitation of information from the user and the refinement of information based on patterns of interaction. In such cases, the emphasis on adaptability is on facilitating information search and knowledge discovery. In this article, we present research on adaptive interfaces that facilitates personalized information seeking from a large data warehouse. The resulting proof-of-concept system, called source recommendation system (SRS), assists users in locating and navigating data sources in the repository. Based on the initial user query and an analysis of the content of the search results, the SRS system generates a profile of the user tailored to the individual's context during information seeking. The user profiles are refined successively and are used in progressively guiding the user to the appropriate set of sources within the knowledge base. The SRS system is implemented as an Internet browser plug-in to provide a seamless and unobtrusive, personalized experience to the users during the information search process. The rationale behind our approach, system design, empirical evaluation, and implications for research on adaptive interfaces are described in this paper.

  6. Augmented Reality Interfaces for Additive Manufacturing

    DEFF Research Database (Denmark)

    Eiríksson, Eyþór Rúnar; Pedersen, David Bue; Frisvad, Jeppe Revall

    2017-01-01

    This paper explores potential use cases for using augmented reality (AR) as a tool to operate industrial machines. As a baseline we use an additive manufacturing system, more commonly known as a 3D printer. We implement novel augmented interfaces and controls using readily available open source...

  7. Configuring Semantic Web Interfaces by Data Mapping

    NARCIS (Netherlands)

    Hildebrand, M.; Ossenbruggen, J.R. van

    2009-01-01

    We demonstrate how to develop Web-based user interfaces for Semantic Web applications using commonly available, off-the-shelf Web widget libraries. By formally defining the underlying data model that is assumed by these widgets, Semantic Web application developers can use familiar RDF constructs to

  8. Service Robot SCORPIO with Robust Speech Interface

    Directory of Open Access Journals (Sweden)

    Stanislav Ondas

    2013-01-01

    Full Text Available The SCORPIO is a small‐size mini‐teleoperator mobile service robot for booby‐trap disposal. It can be manually controlled by an operator through a portable briefcase remote control device using joystick, keyboard and buttons. In this paper, the speech interface is described. As an auxiliary function, the remote interface allows a human operator to concentrate sight and/or hands on other operation activities that are more important. The developed speech interface is based on HMM‐based acoustic models trained using the SpeechDatE‐SK database, a small‐vocabulary language model based on fixed connected words, grammar, and the speech recognition setup adapted for low‐resource devices. To improve the robustness of the speech interface in an outdoor environment, which is the working area of the SCORPIO service robot, a speech enhancement based on the spectral subtraction method, as well as a unique combination of an iterative approach and a modified LIMA framework, were researched, developed and tested on simulated and real outdoor recordings.

  9. Mixed Mode cohesive law with interface dilatation

    DEFF Research Database (Denmark)

    Sørensen, Bent F.; Goutianos, Stergios

    2014-01-01

    shear stresses opposing the crack face displacements. A phenomenological Mixed Mode cohesive zone law, derived from a potential function, is developed to describe the above mentioned fracture behaviour under monotonic opening. The interface dilatation introduces two new lengths. The cohesive law...

  10. TOCAR: a code to interface FOURACES - CARNAVAL

    Energy Technology Data Exchange (ETDEWEB)

    Panini, G.C.; Vaccari, M.

    1981-08-01

    The TOCAR code, written in FORTRAN-IV for IBM-370 computers, is an interface between the output of the FOURACES code and the CARNAVAL binary format for the multigroup neutron cross-sections, scattering matrices and related quantities. Besides the description of the code and the how to use, the report contains the code listing.

  11. Interface Electronic Circuitry for an Electronic Tongue

    Science.gov (United States)

    Keymeulen, Didier; Buehler, Martin

    2007-01-01

    Electronic circuitry has been developed to serve as an interface between an electronic tongue and digital input/output boards in a laptop computer that is used to control the tongue and process its readings. Electronic tongues can be used for a variety of purposes, including evaluating water quality, analyzing biochemicals, analyzing biofilms, and measuring electrical conductivities of soils.

  12. A computational method for sharp interface advection

    Science.gov (United States)

    Roenby, Johan; Bredmose, Henrik; Jasak, Hrvoje

    2016-11-01

    We devise a numerical method for passive advection of a surface, such as the interface between two incompressible fluids, across a computational mesh. The method is called isoAdvector, and is developed for general meshes consisting of arbitrary polyhedral cells. The algorithm is based on the volume of fluid (VOF) idea of calculating the volume of one of the fluids transported across the mesh faces during a time step. The novelty of the isoAdvector concept consists of two parts. First, we exploit an isosurface concept for modelling the interface inside cells in a geometric surface reconstruction step. Second, from the reconstructed surface, we model the motion of the face-interface intersection line for a general polygonal face to obtain the time evolution within a time step of the submerged face area. Integrating this submerged area over the time step leads to an accurate estimate for the total volume of fluid transported across the face. The method was tested on simple two-dimensional and three-dimensional interface advection problems on both structured and unstructured meshes. The results are very satisfactory in terms of volume conservation, boundedness, surface sharpness and efficiency. The isoAdvector method was implemented as an OpenFOAM extension and is published as open source.

  13. Affective Brain-Computer Interfaces: Preface

    NARCIS (Netherlands)

    Unknown, [Unknown; Muhl, C.; Mühl, C.; Heylen, Dirk K.J.; Heylen, D.K.J.; Nijholt, A.; Nijholt, Antinus

    2009-01-01

    These are the proceedings of ABCI 2009, Affective Brain Computer Interfaces, a workshop that was organized in conjunction with ACII 2009, the International Conference on Affective Computation and Intelligent Interaction, held in Amsterdam, The Netherlands, September 2009. The workshop took place on

  14. MICROSTRUCTURE CHARACTERISTICS AT THE BOND INTERFACE

    Institute of Scientific and Technical Information of China (English)

    Li Junhui; Han Lei; Zhong Jue

    2005-01-01

    Lift-off and section characteristics at the interface of thermosonic bond are observed by using scanning electron microscope (KYKY2800) with EDS-test. Results show that the peeling underdeveloped bonds simulate a torus (or doughnut) with an unbonded central region and ridged peripheral region is bonded hardly. Inside roundness at flip chip bonding center are discovered. Bond strength is located between the severely ridged periphery and the non-adhering central area of the bond. For constant force and time, the ridged area of the bond pattern increases when more power is applied. For constant force and power, the ridged location of the bonded region moves closer to the bond center with time. Results of EDS-tests at Au-Al and Au-Ag interfaces show that Kirkendall diffusibility at Au-Ag interface occur and the diffusing speed of Au-atomic is faster than that of Ag,and that intermetallic compounds at Au-A1 interface is generated possibly. And these would be helpful for further research about thermosonic bonding.

  15. Complex coacervates formed across liquid interfaces

    NARCIS (Netherlands)

    Monteillet, H.; Kleijn, J.M.; Sprakel, J.; Leermakers, F.A.M.

    2017-01-01

    The Scheutjens-Fleer self-consistent field (SF-SCF) theory is used to study complexation between two oppositely charged polyelectrolytes across an interface formed by two solvents, here called oil and water. The focus is on the composition and the lateral stability of such interfacial coacervate. On

  16. Demonstrator 1: User Interface and User Functions

    DEFF Research Database (Denmark)

    Gram, Christian

    1999-01-01

    Describes the user interface and its functionality in a prototype system used for a virtual seminar session. The functionality is restricted to what is needed for a distributed seminar discussion among not too many people. The system is designed to work with the participants distributed at several...

  17. Language Testing--SLA Research Interfaces.

    Science.gov (United States)

    Bachman, Lyle F.

    1988-01-01

    Discusses three research/testing interfaces in second-language (L2) testing: the covariance structure analysis of ex post facto correlational data, the qualitative investigation of test-taking processes, and the development of L2 assessment instruments based on developmental sequences in L2 acquisition. (61 references) (GLR)

  18. Normative Language Policy: Interface and Interfences

    Science.gov (United States)

    Peled, Yael

    2014-01-01

    The emerging interdisciplinary work in language politics and language policy and planning studies demonstrates a rising interest among researchers in the interface between sociolinguistics, political science and philosophy. Much of the resulting cross-disciplinary work, however, tends to focus on the subject matters (politics, language) themselves…

  19. Brain-Computer Interfacing for Intelligent Systems

    NARCIS (Netherlands)

    Nijholt, Anton; Tan, Desney; Pfurtscheller, Gert; Brunner, Clemens; R. Millán, del José; Allison, Brandan; Graimann, Bernhard; Popescu, Florin; Blankertz, Benjamin; Müller, Klaus-R.

    2008-01-01

    Advances in cognitive neuroscience and brain-imaging technologies give us the unprecedented ability to interface directly with brain activity. These technologies let us monitor physical processes in the brain that correspond with certain forms of thought. Researchers have begun using these technolog

  20. A Computational Method for Sharp Interface Advection

    CERN Document Server

    Roenby, Johan; Jasak, Hrvoje

    2016-01-01

    We devise a numerical method for passive advection of a surface, such as the interface between two incompressible fluids, across a computational mesh. The method is called isoAdvector, and is developed for general meshes consisting of arbitrary polyhedral cells. The algorithm is based on the volume of fluid (VOF) idea of calculating the volume of one of the fluids transported across the mesh faces during a time step. The novelty of the isoAdvector concept consists in two parts: First, we exploit an isosurface concept for modelling the interface inside cells in a geometric surface reconstruction step. Second, from the reconstructed surface, we model the motion of the face-interface intersection line for a general polygonal face to obtain the time evolution within a time step of the submerged face area. Integrating this submerged area over the time step leads to an accurate estimate for the total volume of fluid transported across the face. The method was tested on simple 2D and 3D interface advection problems ...