Interatomic potentials for materials of nuclear interest

International Nuclear Information System (INIS)

Fernandez, Julian R.; Monti, Ana M.; Pasianot, Roberto C.; Simonelli, G.

2007-01-01

Procedures to develop embedded atom method (EAM) interatomic potentials are described, with foreseeable applications in nuclear materials. Their reliability is shown by evaluating relevant properties. The studied materials are Nb, Zr and U. The first two were then used to develop an inter species potential for the Zr-Nb binary system. In this sense, the Fe-Cu system was also studied starting from Fe and Cu potentials extracted from the literature. (author) [es

Development of an inter-atomic potential for the Pd-H binary system.

Energy Technology Data Exchange (ETDEWEB)

Zimmerman, Jonathan A.; Hoyt, Jeffrey John (McMaster University, Hamilton, Ontario, Canada); Leonard, Francois Leonard; Griffin, Joshua D.; Zhou, Xiao Wang

2007-09-01

Ongoing research at Sandia National Laboratories has been in the area of developing models and simulation methods that can be used to uncover and illuminate the material defects created during He bubble growth in aging bulk metal tritides. Previous efforts have used molecular dynamics calculations to examine the physical mechanisms by which growing He bubbles in a Pd metal lattice create material defects. However, these efforts focused only on the growth of He bubbles in pure Pd and not on bubble growth in the material of interest, palladium tritide (PdT), or its non-radioactive isotope palladium hydride (PdH). The reason for this is that existing inter-atomic potentials do not adequately describe the thermodynamics of the Pd-H system, which includes a miscibility gap that leads to phase separation of the dilute (alpha) and concentrated (beta) alloys of H in Pd at room temperature. This document will report the results of research to either find or develop inter-atomic potentials for the Pd-H and Pd-T systems, including our efforts to use experimental data and density functional theory calculations to create an inter-atomic potential for this unique metal alloy system.

A comparison of interatomic potentials for modeling tungsten nanocluster structures

Energy Technology Data Exchange (ETDEWEB)

Hao, Jiannan; Shu, Xiaolin, E-mail: shuxlin@buaa.edu.cn; Jin, Shuo; Zhang, Xuesong; Zhang, Ying; Lu, Guang-Hong

2017-02-15

Molecular dynamic simulation is utilized to study the nanocluster and the fuzz structure on the PFM surface of tungsten. The polyhedral and linear cluster structures based on the icosahedron, cuboctahedron and rhombic dodecahedron are built up. Three interatomic potentials are used in calculating the relationship between the cluster energy and the number of atoms. The results are compared with first-principles calculation to show each potential’s best application scale. Furthermore, the transition between the icosahedral and the cuboctahedral clusters is observed in molecular dynamic simulation at different temperatures, which follows a critical curve for different numbers of atoms. The linear structures are proved to be stable at experimental temperatures by thermodynamics. The work presents a selection of interatomic potentials in simulating tungsten cluster systems and helps researchers understand the growth and evolution laws of clusters and the fuzz-like structure formation process in fusion devices.

A comparison of interatomic potentials for modeling tungsten nanocluster structures

International Nuclear Information System (INIS)

Hao, Jiannan; Shu, Xiaolin; Jin, Shuo; Zhang, Xuesong; Zhang, Ying; Lu, Guang-Hong

2017-01-01

Molecular dynamic simulation is utilized to study the nanocluster and the fuzz structure on the PFM surface of tungsten. The polyhedral and linear cluster structures based on the icosahedron, cuboctahedron and rhombic dodecahedron are built up. Three interatomic potentials are used in calculating the relationship between the cluster energy and the number of atoms. The results are compared with first-principles calculation to show each potential’s best application scale. Furthermore, the transition between the icosahedral and the cuboctahedral clusters is observed in molecular dynamic simulation at different temperatures, which follows a critical curve for different numbers of atoms. The linear structures are proved to be stable at experimental temperatures by thermodynamics. The work presents a selection of interatomic potentials in simulating tungsten cluster systems and helps researchers understand the growth and evolution laws of clusters and the fuzz-like structure formation process in fusion devices.

Phonon optimized interatomic potential for aluminum

Directory of Open Access Journals (Sweden)

Murali Gopal Muraleedharan

2017-12-01

Full Text Available We address the problem of generating a phonon optimized interatomic potential (POP for aluminum. The POP methodology, which has already been shown to work for semiconductors such as silicon and germanium, uses an evolutionary strategy based on a genetic algorithm (GA to optimize the free parameters in an empirical interatomic potential (EIP. For aluminum, we used the Vashishta functional form. The training data set was generated ab initio, consisting of forces, energy vs. volume, stresses, and harmonic and cubic force constants obtained from density functional theory (DFT calculations. Existing potentials for aluminum, such as the embedded atom method (EAM and charge-optimized many-body (COMB3 potential, show larger errors when the EIP forces are compared with those predicted by DFT, and thus they are not particularly well suited for reproducing phonon properties. Using a comprehensive Vashishta functional form, which involves short and long-ranged interactions, as well as three-body terms, we were able to better capture interactions that reproduce phonon properties accurately. Furthermore, the Vashishta potential is flexible enough to be extended to Al2O3 and the interface between Al-Al2O3, which is technologically important for combustion of solid Al nano powders. The POP developed here is tested for accuracy by comparing phonon thermal conductivity accumulation plots, density of states, and dispersion relations with DFT results. It is shown to perform well in molecular dynamics (MD simulations as well, where the phonon thermal conductivity is calculated via the Green-Kubo relation. The results are within 10% of the values obtained by solving the Boltzmann transport equation (BTE, employing Fermi’s Golden Rule to predict the phonon-phonon relaxation times.

Phonon optimized interatomic potential for aluminum

Science.gov (United States)

Muraleedharan, Murali Gopal; Rohskopf, Andrew; Yang, Vigor; Henry, Asegun

2017-12-01

We address the problem of generating a phonon optimized interatomic potential (POP) for aluminum. The POP methodology, which has already been shown to work for semiconductors such as silicon and germanium, uses an evolutionary strategy based on a genetic algorithm (GA) to optimize the free parameters in an empirical interatomic potential (EIP). For aluminum, we used the Vashishta functional form. The training data set was generated ab initio, consisting of forces, energy vs. volume, stresses, and harmonic and cubic force constants obtained from density functional theory (DFT) calculations. Existing potentials for aluminum, such as the embedded atom method (EAM) and charge-optimized many-body (COMB3) potential, show larger errors when the EIP forces are compared with those predicted by DFT, and thus they are not particularly well suited for reproducing phonon properties. Using a comprehensive Vashishta functional form, which involves short and long-ranged interactions, as well as three-body terms, we were able to better capture interactions that reproduce phonon properties accurately. Furthermore, the Vashishta potential is flexible enough to be extended to Al2O3 and the interface between Al-Al2O3, which is technologically important for combustion of solid Al nano powders. The POP developed here is tested for accuracy by comparing phonon thermal conductivity accumulation plots, density of states, and dispersion relations with DFT results. It is shown to perform well in molecular dynamics (MD) simulations as well, where the phonon thermal conductivity is calculated via the Green-Kubo relation. The results are within 10% of the values obtained by solving the Boltzmann transport equation (BTE), employing Fermi's Golden Rule to predict the phonon-phonon relaxation times.

Interatomic Coulombic electron capture in atomic, molecular, and quantum dot systems

Directory of Open Access Journals (Sweden)

Bande Annika

2015-01-01

Full Text Available The interatomic Coulombic electron capture (ICEC process has recently been predicted theoretically for clusters of atoms and molecules. For an atom A capturing an electron e(ε it competes with the well known photorecombination, because in an environment of neutral or anionic neighboring atoms B, A can transfer its excess energy in the ultrafast ICEC process to B which is then ionized. The cross section for e(ε + A + B → A− + B+ + e(ε′ has been obtained in an asymptotic approximation based on scattering theory for several clusters [1,2]. It was found that ICEC starts dominating the PR for distances among participating species of nanometers and lower. Therefore, we believe that the ICEC process might be of importance in the atmosphere, in biological systems, plasmas, or in nanostructured materials. As an example for the latter, ICEC has been investigated by means of electron dynamics in a model potential for semiconductor double quantum dots (QDs [3]. In the simplest case one QD captures an electron while the outgoing electron is emitted from the other. The reaction probability for this process was found to be relatively large.

A gradient approximation for calculating Debye temperatures from pairwise interatomic potentials

International Nuclear Information System (INIS)

Jackson, D.P.

1975-09-01

A simple gradient approximation is given for calculating the effective Debye temperature of a cubic crystal from central pairwise interatomic potentials. For examples of the Morse potential applied to cubic metals the results are in generally good agreement with experiment. (author)

Accurate Ne-heavier rare gas interatomic potentials

International Nuclear Information System (INIS)

Candori, R.; Pirani, F.; Vecchiocattivi, F.

1983-01-01

Accurate interatomic potential curves for Ne-heavier rare gas systems are obtained by a multiproperty analysis. The curves are given via a parametric function which consists of a modified Dunham expansion connected at long range with the van der Waals expansion. The experimental properties considered in the analysis are the differential scattering cross sections at two different collision energies, the integral cross sections in the glory energy range and the second virial coefficients. The transport properties are considered indirectly by using the potential energy values recently obtained by inversion of the transport coefficients. (author)

A novel proof of the DFT formula for the interatomic force field of Molecular Dynamics

International Nuclear Information System (INIS)

Morante, S.; Rossi, G.C.

2017-01-01

We give a novel and simple proof of the DFT expression for the interatomic force field that drives the motion of atoms in classical Molecular Dynamics, based on the observation that the ground state electronic energy, seen as a functional of the external potential, is the Legendre transform of the Hohenberg–Kohn functional, which in turn is a functional of the electronic density. We show in this way that the so-called Hellmann–Feynman analytical formula, currently used in numerical simulations, actually provides the exact expression of the interatomic force.

A novel proof of the DFT formula for the interatomic force field of Molecular Dynamics

Energy Technology Data Exchange (ETDEWEB)

Morante, S., E-mail: morante@roma2.infn.it [Dipartimento di Fisica, Università di Roma, “ Tor Vergata ”, INFN, Sezione di Roma 2, Via della Ricerca Scientifica - 00133 Roma (Italy); Rossi, G.C., E-mail: rossig@roma2.infn.it [Dipartimento di Fisica, Università di Roma, “ Tor Vergata ”, INFN, Sezione di Roma 2, Via della Ricerca Scientifica - 00133 Roma (Italy); Centro Fermi-Museo Storico della Fisica e Centro Studi e Ricerche E. Fermi, Compendio del Viminale, Piazza del Viminale 1, I-00184 Rome (Italy)

2017-02-15

We give a novel and simple proof of the DFT expression for the interatomic force field that drives the motion of atoms in classical Molecular Dynamics, based on the observation that the ground state electronic energy, seen as a functional of the external potential, is the Legendre transform of the Hohenberg–Kohn functional, which in turn is a functional of the electronic density. We show in this way that the so-called Hellmann–Feynman analytical formula, currently used in numerical simulations, actually provides the exact expression of the interatomic force.

Evidence of sequential interatomic decay in argon trimers obtained by electron-triple-ion coincidence spectroscopy

International Nuclear Information System (INIS)

Liu, X-J; Saito, N; Fukuzawa, H; Morishita, Y; Stoychev, S; Kuleff, A; Suzuki, I H; Tamenori, Y; Richter, R; Pruemper, G; Ueda, K

2007-01-01

Sequential interatomic decay, where the first step is an Auger decay with interatomic character and the second step is a pure interatomic Coulombic decay (ICD), is identified in Ar trimers Ar 3 . The 2p hole state in Ar 3 decays via the L 2,3 M 1 M 2,3 Auger to the one-site two-hole states Ar ++ (3s -1 3p -1 )-Ar-Ar that couples to the two-site satellite states Ar + (3p -2 nl)-Ar + (3p -1 )-Ar. These states are subject to ICD to the states Ar + (3p -1 )-Ar + (3p -1 )-Ar + (3p -1 ), in which the nl electron fills the 3p hole in the same Ar site and one of the 3p electrons in the third Ar site is emitted as a slow ICD electron. This ICD process is identified unambiguously by electron-ion-ion-ion coincidence spectroscopy in which the kinetic energy of the slow ICD electron and the kinetic energy release among the three Ar + ions are measured in coincidence. (fast track communication)

Multipole expansion of the retarded interatomic dispersion energy: derivation from quantum electrodynamics

NARCIS (Netherlands)

Michels, M.A.J.; Suttorp, L.G.

1972-01-01

The multipole expansion of the retarded dispersion energy of two atoms in nondegenerate ground states is derived. The result shows that multipoles of different order may give rise to dispersion energies varying in the same way for large interatomic separations.

Development of an interatomic EAM type potential for Zr

International Nuclear Information System (INIS)

Pasianot, R.C.; Monti, A.M.

1996-01-01

In the present work are developed interatomic potentials of the embedded atom type (EAM) adequate for computer simulation of microstructural defects in the Zr lattice. It is observed that the less repulsive potential agrees better with the experimental data of the self-interstitial relaxation volume and predicts the basal crowdion as the stable configuration, the basal dumbbell having a formation energy slightly higher (0.01 eV). (author). 9 refs., 1 fig., 3 tabs

Interatomic decay of inner-valence ionized states in ArXe clusters: Relativistic approach

International Nuclear Information System (INIS)

Fasshauer, Elke; Pernpointner, Markus; Gokhberg, Kirill

2013-01-01

In this work we investigate interatomic electronic decay processes taking place in mixed argon-xenon clusters upon the inner-valence ionization of an argon center. We demonstrate that both interatomic Coulombic decay and electron-transfer mediated decay (ETMD) are important in larger rare gas clusters as opposed to dimers. Calculated secondary electron spectra are shown to depend strongly on the spin-orbit coupling in the final states of the decay as well as the presence of polarizable environment. It follows from our calculations that ETMD is a pure interface process taking place between the argon-xenon layers. The interplay of all these effects is investigated in order to arrive at a suitable physical model for the decay of inner-valence vacancies taking place in mixed ArXe clusters.

Temperature dependence in interatomic potentials and an improved potential for Ti

International Nuclear Information System (INIS)

Ackland, G J

2012-01-01

The process of deriving an interatomic potentials represents an attempt to integrate out the electronic degrees of freedom from the full quantum description of a condensed matter system. In practice it is the derivatives of the interatomic potentials which are used in molecular dynamics, as a model for the forces on a system. These forces should be the derivative of the free energy of the electronic system, which includes contributions from the entropy of the electronic states. This free energy is weakly temperature dependent, and although this can be safely neglected in many cases there are some systems where the electronic entropy plays a significant role. Here a method is proposed to incorporate electronic entropy in the Sommerfeld approximation into empirical potentials. The method is applied as a correction to an existing potential for titanium. Thermal properties of the new model are calculated, and a simple method for fixing the melting point and solid-solid phase transition temperature for existing models fitted to zero temperature data is presented.

Influence of the interatomic potentials on molecular dynamics simulations of displacement cascades

CERN Document Server

Becquart, C S; Legris, A; Van Duysen, J C

2000-01-01

Molecular dynamics (MD) is a powerful tool to study the displacement cascades initiated by the neutrons when they interact with matter. Key components of this technique are the interatomic potentials which model the binding of the different constitutive atoms. There exist many interatomic potentials dedicated to alpha-Fe and we have tested three of them for the study of radiation damage. We have found that the primary damage is potential sensitive. From our study, it appears that some characteristics of the potentials, not always considered, can be correlated to the type of damage produced by displacement cascades. The repulsive part of the potential has a strong influence on the cascade morphology. Moreover, equilibrium properties such as the atoms mean square displacements, the vacancy migration and vacancy-vacancy binding energies also appear to have some influence and should be investigated carefully when simulating radiation damage. It is therefore very important to use extreme care when trying to obtain...

FAST TRACK COMMUNICATION: A Be-W interatomic potential

Science.gov (United States)

Björkas, C.; Henriksson, K. O. E.; Probst, M.; Nordlund, K.

2010-09-01

In this work, an interatomic potential for the beryllium-tungsten system is derived. It is the final piece of a potential puzzle, now containing all possible interactions between the fusion reactor materials beryllium, tungsten and carbon as well as the plasma hydrogen isotopes. The potential is suitable for plasma-wall interaction simulations and can describe the intermetallic Be2W and Be12W phases. The interaction energy between a Be surface and a W atom, and vice versa, agrees qualitatively with ab initio calculations. The potential can also reasonably describe BexWy molecules with x, y = 1, 2, 3, 4.

Facilitating the selection and creation of accurate interatomic potentials with robust tools and characterization

Science.gov (United States)

Trautt, Zachary T.; Tavazza, Francesca; Becker, Chandler A.

2015-10-01

The Materials Genome Initiative seeks to significantly decrease the cost and time of development and integration of new materials. Within the domain of atomistic simulations, several roadblocks stand in the way of reaching this goal. While the NIST Interatomic Potentials Repository hosts numerous interatomic potentials (force fields), researchers cannot immediately determine the best choice(s) for their use case. Researchers developing new potentials, specifically those in restricted environments, lack a comprehensive portfolio of efficient tools capable of calculating and archiving the properties of their potentials. This paper elucidates one solution to these problems, which uses Python-based scripts that are suitable for rapid property evaluation and human knowledge transfer. Calculation results are visible on the repository website, which reduces the time required to select an interatomic potential for a specific use case. Furthermore, property evaluation scripts are being integrated with modern platforms to improve discoverability and access of materials property data. To demonstrate these scripts and features, we will discuss the automation of stacking fault energy calculations and their application to additional elements. While the calculation methodology was developed previously, we are using it here as a case study in simulation automation and property calculations. We demonstrate how the use of Python scripts allows for rapid calculation in a more easily managed way where the calculations can be modified, and the results presented in user-friendly and concise ways. Additionally, the methods can be incorporated into other efforts, such as openKIM.

Facilitating the selection and creation of accurate interatomic potentials with robust tools and characterization

International Nuclear Information System (INIS)

Trautt, Zachary T; Tavazza, Francesca; Becker, Chandler A

2015-01-01

The Materials Genome Initiative seeks to significantly decrease the cost and time of development and integration of new materials. Within the domain of atomistic simulations, several roadblocks stand in the way of reaching this goal. While the NIST Interatomic Potentials Repository hosts numerous interatomic potentials (force fields), researchers cannot immediately determine the best choice(s) for their use case. Researchers developing new potentials, specifically those in restricted environments, lack a comprehensive portfolio of efficient tools capable of calculating and archiving the properties of their potentials. This paper elucidates one solution to these problems, which uses Python-based scripts that are suitable for rapid property evaluation and human knowledge transfer. Calculation results are visible on the repository website, which reduces the time required to select an interatomic potential for a specific use case. Furthermore, property evaluation scripts are being integrated with modern platforms to improve discoverability and access of materials property data. To demonstrate these scripts and features, we will discuss the automation of stacking fault energy calculations and their application to additional elements. While the calculation methodology was developed previously, we are using it here as a case study in simulation automation and property calculations. We demonstrate how the use of Python scripts allows for rapid calculation in a more easily managed way where the calculations can be modified, and the results presented in user-friendly and concise ways. Additionally, the methods can be incorporated into other efforts, such as openKIM. (paper)

Bayesian ensemble approach to error estimation of interatomic potentials

DEFF Research Database (Denmark)

Frederiksen, Søren Lund; Jacobsen, Karsten Wedel; Brown, K.S.

2004-01-01

Using a Bayesian approach a general method is developed to assess error bars on predictions made by models fitted to data. The error bars are estimated from fluctuations in ensembles of models sampling the model-parameter space with a probability density set by the minimum cost. The method...... is applied to the development of interatomic potentials for molybdenum using various potential forms and databases based on atomic forces. The calculated error bars on elastic constants, gamma-surface energies, structural energies, and dislocation properties are shown to provide realistic estimates...

Xenon Defects in Uranium Dioxide From First Principles and Interatomic Potentials

Science.gov (United States)

Thompson, Alexander

In this thesis, we examine the defect energetics and migration energies of xenon atoms in uranium dioxide (UO2) from first principles and interatomic potentials. We also parameterize new, accurate interatomic potentials for xenon and uranium dioxide. To achieve accurate energetics and provide a foundation for subsequent calculations, we address difficulties in finding consistent energetics within Hubbard U corrected density functional theory (DFT+U). We propose a method of slowly ramping the U parameter in order to guide the calculation into low energy orbital occupations. We find that this method is successful for a variety of materials. We then examine the defect energetics of several noble gas atoms in UO2 for several different defect sites. We show that the energy to incorporate large noble gas atoms into interstitial sites is so large that it is energetically favorable for a Schottky defect cluster to be created to relieve the strain. We find that, thermodynamically, xenon will rarely ever be in the interstitial site of UO2. To study larger defects associated with the migration of xenon in UO 2, we turn to interatomic potentials. We benchmark several previously published potentials against DFT+U defect energetics and migration barriers. Using a combination of molecular dynamics and nudged elastic band calculations, we find a new, low energy migration pathway for xenon in UO2. We create a new potential for xenon that yields accurate defect energetics. We fit this new potential with a method we call Iterative Potential Refinement that parameterizes potentials to first principles data via a genetic algorithm. The potential finds accurate energetics for defects with relatively low amounts of strain (xenon in defect clusters). It is important to find accurate energetics for these sorts of low-strain defects because they essentially represent small xenon bubbles. Finally, we parameterize a new UO2 potential that simultaneously yields accurate vibrational properties

Development of an empirical interatomic potential for the Ag–Ti system

Energy Technology Data Exchange (ETDEWEB)

Zhou, Ying, E-mail: y.zhou3@lboro.ac.uk [Department of Mathematical Sciences, Loughborough University, Leicestershire LE11 3TU (United Kingdom); Smith, Roger [Department of Mathematical Sciences, Loughborough University, Leicestershire LE11 3TU (United Kingdom); Kenny, Steven D. [Department of Materials, Loughborough University, Leicestershire LE11 3TU (United Kingdom); Lloyd, Adam L. [Department of Mathematical Sciences, Loughborough University, Leicestershire LE11 3TU (United Kingdom)

2017-02-15

Highlights: • A new modified embedded-atom method interatomic potential for Ag and Ti was developed. • Binding energies for various configurations were calculated using SIESTA and were used as the fitting target. • Two mixing rules for the embedded-atom method based on the same elemental potentials were also investigated. • The results showed that the MEAM with the optimised parameters gives the best agreement to the DFT results. - Abstract: Two interatomic potential mixing rules for the Ti–Ag system were investigated based on the embedded-atom method (EAM) elemental potentials. First principles calculations were performed using SIESTA for various configurations of the Ti–Ag system to see which model best fitted the ab initio results. The results showed that the surface energies, especially that of Ti, were not well fitted by either model and the surface binding energies differed from the ab initio calculations. As a result, the modified embedded-atom method (MEAM) was investigated. In contrast to the other models, surface energies for pure Ti calculated by MEAM were in good agreement with the experimental data and the ab initio results. The MEAM mixing rule was used to investigate Ag ad-atoms on Ti and Ti ad-atoms on Ag. The results showed good agreement with SIESTA after parameter optimisation.

Parameterization of interatomic potential by genetic algorithms: A case study

Energy Technology Data Exchange (ETDEWEB)

Ghosh, Partha S., E-mail: psghosh@barc.gov.in; Arya, A.; Dey, G. K. [Materials Science Division, Bhabha Atomic Research Centre, Mumbai-400085 (India); Ranawat, Y. S. [Department of Ceramic Engineering, Indian Institute of Technology (BHU), Varanasi-221005 (India)

2015-06-24

A framework for Genetic Algorithm based methodology is developed to systematically obtain and optimize parameters for interatomic force field functions for MD simulations by fitting to a reference data base. This methodology is applied to the fitting of ThO{sub 2} (CaF{sub 2} prototype) – a representative of ceramic based potential fuel for nuclear applications. The resulting GA optimized parameterization of ThO{sub 2} is able to capture basic structural, mechanical, thermo-physical properties and also describes defect structures within the permissible range.

Scattering of thermal He beams by crossed atomic and molecular beams. I. Sensitivity of the elastic differential cross section to the interatomic potential

International Nuclear Information System (INIS)

Keil, M.; Kuppermann, A.

1978-01-01

The ability of diffraction oscillations in atomic beam scattering experiments to uniquely determine interatomic potentials for highly quantal systems is examined. Assumed but realistic potentials are used to generate, by scattering calculations and incorporation of random errors, differential cross sections which are then treated as if they were ''experimental'' data. From these, attempts are made to recover the initial potential by varying the parameters of assumed mathematical forms different from the original one, until a best fit to the ''experimental'' results is obtained. It is found that the region of the interaction potential around the van der Waals minimum is accurately determined by the ''measured'' differential cross sections over a range of interatomic separations significantly wider than would be expected classically. It is also found, for collision energies at which the weakly repulsive wall is appreciably sampled, that the SPF--Dunham and double Morse--van der Waals types of potentials lead to accurate determinations of the interatomic potential, whereas many other mathematical forms do not. Analytical parameterizations most appropriate for obtaining accurate interatomic potentials from thermal DCS experiments, for a given highly quantal system, may depend on the collision energy used

Eutectic composite NiAl-Cr properties modeling based on interatomic interaction forces

Science.gov (United States)

Badamshin, I. Kh

2018-03-01

For new materials, information on the elasticity and strength characteristics necessary for calculating the stress-strain state of the turbine blades is limited. In these conditions, there is a need for theoretical methods for calculating the elastic and strength characteristics. The proposed theoretical methods are based on forces of interatomic interaction calculation. The classical methods based on the hypothesis of continuity do not allow calculating the material strength and thermophysical properties.

Interatomic forces and bonding mechanisms in MgO clusters

International Nuclear Information System (INIS)

Wright, N.F.; Painter, G.S.

1990-01-01

We report results from a first-principles local spin density quantum mechanical study of the energetics and elastic properties of a series of magnesium-oxygen clusters of various morphologies. The role of quantum effects, e.g. covalency, in the bonding character of diatomic MgO is determined by comparison of classical and quantum restoring force curves. The dependence of binding properties on geometry and metal to oxygen ratio is determined by comparison of binding energy curves for a series of clusters. Results show that while gross features of the binding curves may be represented by simple interatomic potentials, details require the many body corrections of a full quantum treatment. 6 refs., 5 figs

Interatomic interaction of additive elements and their influence on the processes in the double metal solutions

Directory of Open Access Journals (Sweden)

Марина Анатоліівна Рябікіна

2016-07-01

Full Text Available Modern industry uses a lot of elements as additives to improve the service characteristics of metal products that are to be used for various purposes. These elements can be divided into two groups: the first group includes the elements interacting with iron and improving its characteristics (alloying elements, and the second group includes the elements, that modify the characteristics of the structure and properties in an undesirable direction. These are trace elements: S, P, O, As, and others in steel. The negative impact of these elements shows itself as banding, the formation of non-metallic inclusions, flakes, grain boundary segregations et al. The influence of the elements of the both groups on the properties of steel depends on the nature and level of interatomic interaction in the alloy. Computational and analytical study of the major impurity elements in steel impact on the interatomic bond strength and the probability of forming complexes, clusters, and chemical compounds with the basic alloying elements in the steel has been carried out in the work. The theoretical parameter which defines the strength of the ion-covalent bond of two atoms: non-metallic – metallic is the electronegativity of elements. The electronegativity difference of the metal and non-metallic elements increasing, the ionic bonding and thermodynamic stability of these compounds  increase. On the other hand, concentration of valent electrons is a universal characteristic of an atomic element which determines many of its properties, and especially the energy of interatomic interaction. Energy calculations of pairwise interatomic impurity elements: H, C, N, S, P, As interaction with Fe and major alloying elements in steel: Mn, Cr, Si, V, Al, Ti, W, Cu, Mo, Nb were made. It has been stated that all the impurity elements except phosphorus, hydrogen and arsenic have sufficient high adhesion with the majority of the metal elements in the modern steels. Phosphorus does

Modified embedded-atom method interatomic potential for the Fe-Al system

International Nuclear Information System (INIS)

Lee, Eunkoo; Lee, Byeong-Joo

2010-01-01

An interatomic potential for the Fe-Al binary system has been developed based on the modified embedded-atom method (MEAM) potential formalism. The potential can describe various fundamental physical properties of Fe-Al binary alloys-structural, elastic and thermodynamic properties, defect formation behavior and interactions between defects-in reasonable agreement with experimental data or higher-level calculations. The applicability of the potential to atomistic investigations of various defect formation behaviors and their effects on the mechanical properties of high aluminum steels as well as Fe-Al binary alloys is demonstrated.

Influence of local molecular motions on the determination of 1H-1H internuclear distances measured by 2D 1H spin-exchange experiments

Czech Academy of Sciences Publication Activity Database

Brus, Jiří; Petříčková, H.; Dybal, Jiří

2003-01-01

Roč. 23, č. 4 (2003), s. 183-197 ISSN 0926-2040 R&D Projects: GA AV ČR IAB4050203; GA AV ČR IAA4050208; GA ČR GA203/99/0067 Institutional research plan: CEZ:AV0Z4050913 Keywords : H-1-H-1 spin exchange * interatomic distances * molecular motion Subject RIV: CD - Macromolecular Chemistry Impact factor: 1.453, year: 2003

Interatomic potentials for fusion reactor material simulations

International Nuclear Information System (INIS)

Bjoerkas, C.

2009-01-01

In this thesis, the behaviour of a material situated in a fusion reactor was studied using molecular dynamics simulations. Simulations of processes in the next generation fusion reactor ITER include the reactor materials beryllium, carbon and tungsten as well as the plasma hydrogen isotopes. This means that interaction models, i.e. interatomic potentials, for this complicated quaternary system are needed. The task of finding such potentials is nonetheless nearly at its end, since models for the beryllium-carbon-hydrogen interactions were constructed in this thesis and as a continuation of that work, a beryllium-tungsten model is under development. These potentials are combinable with the earlier tungsten-carbon-hydrogen ones. The potentials were used to explain the chemical sputtering of beryllium due to deuterium plasma exposure. During experiments, a large fraction of the sputtered beryllium atoms were observed to be released as BeD molecules, and the simulations identified the swift chemical sputtering mechanism, previously not believed to be important in metals, as the underlying mechanism. Radiation damage in the reactor structural materials vanadium, iron and iron chromium, as well as in the wall material tungsten and the mixed alloy tungsten carbide, was also studied in this thesis. Interatomic potentials for vanadium, tungsten and iron were modified to be better suited for simulating collision cascades that are formed during particle irradiation, and the potential features affecting the resulting primary damage were identified. Including the often neglected electronic effects in the simulations was also shown to have an impact on the damage. With proper tuning of the electronphonon interaction strength, experimentally measured quantities related to ion-beam mixing in iron could be reproduced. The damage in tungsten carbide alloys showed elemental asymmetry, as the major part of the damage consisted of carbon defects. On the other hand, modelling the damage

Sub-nanometer distances and cluster shapes in dense hydrogen and in higher levels of hydrogen Rydberg matter by phase-delay spectroscopy

International Nuclear Information System (INIS)

Holmlid, Leif

2011-01-01

The inter-atomic distances in potassium clusters of Rydberg matter (RM) at excitation levels n B = 4–8 were recently measured by phase-delay spectroscopy (Holmlid, J Nanopart Res 12: 273, 2010). Excitation levels n B B = 1, 2, and 3 is found. Close-packing is the main structure both in planar and 3D clusters. Planar clusters are only observed for n B = 1 and 3, while 3D clusters are found in excitation levels n B = 1, 2 and 3. The cluster–cluster distance in stacks of planar clusters for n B = 2 and 3 is now observed for the first time.

Zeroth-order exchange energy as a criterion for optimized atomic basis sets in interatomic force calculations

International Nuclear Information System (INIS)

Varandas, A.J.C.

1980-01-01

A suggestion is made for using the zeroth-order exchange term, at the one-exchange level, in the perturbation development of the interaction energy as a criterion for optmizing the atomic basis sets in interatomic force calculations. The approach is illustrated for the case of two helium atoms. (orig.)

Quantum dynamics of a BEC interacting with a single-mode quantized field in the presence of interatom collisions

Energy Technology Data Exchange (ETDEWEB)

Ghasemian, E. [Atomic and Molecular Group, Faculty of Physics, Yazd University, Yazd (Iran, Islamic Republic of); Tavassoly, M.K., E-mail: mktavassoly@yazd.ac.ir [Atomic and Molecular Group, Faculty of Physics, Yazd University, Yazd (Iran, Islamic Republic of); Photonics Research Group, Engineering Research Center, Yazd University, Yazd (Iran, Islamic Republic of); The Laboratory of Quantum Information Processing, Yazd University, Yazd (Iran, Islamic Republic of)

2016-09-23

In this paper, we consider a model in which N two-level atoms in a Bose–Einstein condensate (BEC) interact with a single-mode quantized laser field. Our goal is to investigate the quantum dynamics of atoms in the BEC in the presence of interatom interactions. To achieve the purpose, at first, using the collective angular momentum operators, we try to reduce the dynamical Hamiltonian of the system to a well-known Jaynes–Cummings like model (JCM). We also use the Dicke model to construct the state of atomic subsystem, by which the analytical solution of the system may be obtained. Then, we analyze the atomic population inversion, the degree of entanglement between the “atoms in BEC” and the “field” as well as the Mandel parameter. Numerical results show that, the atomic population inversion, atom-field entanglement and quantum statistics of photons are very sensitive to the evolved parameters in the model (and so can be well-adjusted), such as the number of atoms in BEC, the intensity of initial field, the interatom coupling constant and detuning. To investigate the entanglement properties, we pay attention to the entropy and linear entropy. It is shown that, oscillations in the two entropy criteria may be seen, with some maxima of entanglement at some moments of time. Finally, looking for the quantum statistics, we evaluate the Mandel parameter, by which we demonstrate the sub-Poissonian statistics and so the nonclassical characteristics of the field state of system. Collapse-revival phenomenon, which is a distinguishable nonclassical characteristic of the system, can be apparently observed in the atomic population inversion and the Mandel parameter. - Highlights: • N two-level atoms in a BEC interacting with a laser field in the presence of interatom interactions is considered. • The atomic population inversion, degree of entanglement between the “atoms in BEC” and the “field” and the Mandel parameter are investigated. • Collapse

Concerning the theory of radiation cascades of atomic collisions in a solid with an arbitrary interatomic interaction potential

International Nuclear Information System (INIS)

Ryazanov, A.I.; Metelkin, E.V.

1980-01-01

Cascades of atomic collisions created by high energy particles as a result of irradiation of solids by them are considered. The solution of the problem is based on the investigation of the Boltzmann stationary kinetic equation for moving atoms. For this equation a model scattering indicatrix is constructed with an arbitrary form of the potential of interaction of moving atoms with lattice atoms. The choice of the model scattering indicatrix of atoms is determined by the normalization, the average energy loss in a single collision and by the deviation of the energy losses really occurring in the collision from the mean value, as well as by the initial kinetic equation for moving atoms. The energy distribution of moving atoms for arbitrary interatomic interaction potentials has been obtained using the constructed model scattering indicatrix. On the basis of the theory constructed a cascade is calculated with an interatomic interaction potential in the form of the Thomas-Fermi potential and the power potential. (author)

Study of interatomic potential and thermal structural properties of β-Zn4Sb3

International Nuclear Information System (INIS)

Li, Guodong; Li, Yao; Liu, Lisheng; Zhang, Qingjie; Zhai, Pengcheng

2012-01-01

Highlights: ► The multi-body interatomic potentials of various models of β-Zn 4 Sb 3 have been developed to describe atomic interactions. ► The radial distribution function shows that the 10% vacancy of Zn site leads to the disorder of β-Zn 4 Sb 3 . ► The 10% vacancy of Zn site is the main cause of the exceptional low thermal conductivity. -- Abstract: Previous experimental research shows that the disordered Zn atoms in β-Zn 4 Sb 3 may have an important influence on its exceptionally low thermal conductivity and easily occurred phase transition. So the present work aims to study the influence of disordered Zn atoms on thermodynamics properties of β-Zn 4 Sb 3 by using molecular dynamics (MD) method. Firstly, based on first principles calculation and experimental results, the interatomic potentials of β-Zn 4 Sb 3 and MD analysis method are established, and the feasibility is verified. Then, the influence of disordered Zn atoms on thermal conductivity of β-Zn 4 Sb 3 is studied in detail. The simulation results indicate that the 10% vacant Zn atoms is the main reason for the exceptionally low thermal conductivity of β-Zn 4 Sb 3 , and it seems that the interstitial Zn atoms have little effect on its thermal conductivity.

First-principles interatomic potentials for transition-metal aluminides. III. Extension to ternary phase diagrams

Science.gov (United States)

Widom, Mike; Al-Lehyani, Ibrahim; Moriarty, John A.

2000-08-01

Modeling structural and mechanical properties of intermetallic compounds and alloys requires detailed knowledge of their interatomic interactions. The first two papers of this series [Phys. Rev. B 56, 7905 (1997); 58, 8967 (1998)] derived first-principles interatomic potentials for transition-metal (TM) aluminides using generalized pseudopotential theory (GPT). Those papers focused on binary alloys of aluminum with first-row transition metals and assessed the ability of GPT potentials to reproduce and elucidate the alloy phase diagrams of Al-Co and Al-Ni. This paper addresses the phase diagrams of the binary alloy Al-Cu and the ternary systems Al-Co-Cu and Al-Co-Ni, using GPT pair potentials calculated in the limit of vanishing transition-metal concentration. Despite this highly simplifying approximation, we find rough agreement with the known low-temperature phase diagrams, up to 50% total TM concentration provided the Co fraction is below 25%. Full composition-dependent potentials and many-body interactions would be required to correct deficiencies at higher Co concentration. Outside this troublesome region, the experimentally determined stable and metastable phases all lie on or near the convex hull of a scatter plot of energy versus composition. We verify, qualitatively, reported solubility ranges extending binary alloys into the ternary diagram in both Al-Co-Cu and Al-Co-Ni. Finally, we reproduce previously conjectured transition-metal positions in the decagonal quasicrystal phase.

An interatomic potential for studying CuZr bulk metallic glasses

International Nuclear Information System (INIS)

Paduraru, A.; Kenoufi, A.; Bailey, N.P.; Schioetz, J.

2007-01-01

Glass forming ability has been found in only a small number of binary alloys, one being CuZr. In order to simulate this glass, we fitted an interatomic potential within Effective Medium Theory (EMT). For this purpose we use basic properties of the B2 crystal structure as calculated from Density Functional Theory (DFT) or obtained from experiments. We then performed Molecular Dynamics (MD) simulations of the cooling process and studied the thermodynamics and structure of CuZr glass. We find that the potential gives a good description of the CuZr glass, with a glass transition temperature and elastic constants close to the experimental values. The local atomic order, as witnessed by the radial distribution function, is also consistent with similar experimental data. (Abstract Copyright [2007], Wiley Periodicals, Inc.)

A W−Ne interatomic potential for simulation of neon implantation in tungsten

Energy Technology Data Exchange (ETDEWEB)

Backman, Marie; Juslin, Niklas; Huang, Guiyang [Department of Nuclear Engineering, University of Tennessee, Knoxville, TN 37996-2300 (United States); Wirth, Brian D., E-mail: bdwirth@utk.edu [Department of Nuclear Engineering, University of Tennessee, Knoxville, TN 37996-2300 (United States); P.O. Box 2008, MS-6003, Oak Ridge National Laboratory, Oak Ridge, TN 37831 (United States)

2016-08-15

An interatomic pair potential for W−Ne is developed for atomistic molecular dynamics simulations of neon implantation in tungsten. The new potential predicts point defect energies and binding energies of small clusters that are in good agreement with electronic structure calculations. Molecular dynamics simulations of small neon clusters in tungsten show that trap mutation, in which an interstitial neon cluster displaces a tungsten atom from its lattice site, occurs for clusters of three or more neon atoms. However, near a free surface, trap mutation can occur at smaller sizes, including even a single neon interstitial in close proximity to a (100) or (110) surface.

Extending the accuracy of the SNAP interatomic potential form

Science.gov (United States)

Wood, Mitchell A.; Thompson, Aidan P.

2018-06-01

The Spectral Neighbor Analysis Potential (SNAP) is a classical interatomic potential that expresses the energy of each atom as a linear function of selected bispectrum components of the neighbor atoms. An extension of the SNAP form is proposed that includes quadratic terms in the bispectrum components. The extension is shown to provide a large increase in accuracy relative to the linear form, while incurring only a modest increase in computational cost. The mathematical structure of the quadratic SNAP form is similar to the embedded atom method (EAM), with the SNAP bispectrum components serving as counterparts to the two-body density functions in EAM. The effectiveness of the new form is demonstrated using an extensive set of training data for tantalum structures. Similar to artificial neural network potentials, the quadratic SNAP form requires substantially more training data in order to prevent overfitting. The quality of this new potential form is measured through a robust cross-validation analysis.

First-principles interatomic potentials for transition-metal aluminides. III. Extension to ternary phase diagrams

International Nuclear Information System (INIS)

Widom, Mike; Al-Lehyani, Ibrahim; Moriarty, John A.

2000-01-01

Modeling structural and mechanical properties of intermetallic compounds and alloys requires detailed knowledge of their interatomic interactions. The first two papers of this series [Phys. Rev. B 56, 7905 (1997); 58, 8967 (1998)] derived first-principles interatomic potentials for transition-metal (TM) aluminides using generalized pseudopotential theory (GPT). Those papers focused on binary alloys of aluminum with first-row transition metals and assessed the ability of GPT potentials to reproduce and elucidate the alloy phase diagrams of Al-Co and Al-Ni. This paper addresses the phase diagrams of the binary alloy Al-Cu and the ternary systems Al-Co-Cu and Al-Co-Ni, using GPT pair potentials calculated in the limit of vanishing transition-metal concentration. Despite this highly simplifying approximation, we find rough agreement with the known low-temperature phase diagrams, up to 50% total TM concentration provided the Co fraction is below 25%. Full composition-dependent potentials and many-body interactions would be required to correct deficiencies at higher Co concentration. Outside this troublesome region, the experimentally determined stable and metastable phases all lie on or near the convex hull of a scatter plot of energy versus composition. We verify, qualitatively, reported solubility ranges extending binary alloys into the ternary diagram in both Al-Co-Cu and Al-Co-Ni. Finally, we reproduce previously conjectured transition-metal positions in the decagonal quasicrystal phase. (c) 2000 The American Physical Society

Atomistic simulations of TeO₂-based glasses: interatomic potentials and molecular dynamics.

Science.gov (United States)

Gulenko, Anastasia; Masson, Olivier; Berghout, Abid; Hamani, David; Thomas, Philippe

2014-07-21

In this work we present for the first time empirical interatomic potentials that are able to reproduce TeO2-based systems. Using these potentials in classical molecular dynamics simulations, we obtained first results for the pure TeO2 glass structure model. The calculated pair distribution function is in good agreement with the experimental one, which indicates a realistic glass structure model. We investigated the short- and medium-range TeO2 glass structures. The local environment of the Te atom strongly varies, so that the glass structure model has a broad Q polyhedral distribution. The glass network is described as weakly connected with a large number of terminal oxygen atoms.

An atomic string model for a screw dislocation in iron: Implications for the development of interatomic potentials

International Nuclear Information System (INIS)

Gilbert, M.R.; Dudarev, S.L.; Chiesa, S.; Derlet, P.M.

2009-01-01

Thermally activated motion of screw dislocations is the rate-determining mechanism for plastic deformation and fracture of body centred cubic (bcc) metals and alloys. Recent experimental observations by S.G. Roberts' group at Oxford showed that ductile-brittle behaviour of bcc vanadium, tungsten, pure iron, and iron-chromium alloys is controlled by an Arrhenius process in which the energy for thermal activation is proportional to the formation energy for a double kink on a b= 1/2 screw dislocation, where b is the Burgers vector of the dislocation. Interpreting these experimental observations and extending the analysis to the case of irradiated materials requires developing a full quantitative treatment for perfect and kinked screw dislocations. Modelling screw dislocations also presents a challenge for the development of interatomic potentials. Recent density functional theory (DFT) calculations have revealed that the ground-state structure of the core of screw dislocations in all the bcc transition metals is non-degenerate and symmetric, whereas inter-atomic potentials used in molecular dynamics simulations for these metals often predict a degenerate, symmetry-broken core-structure. In this work we show how, by treating the structure of a screw dislocation within a multistring Frenkel-Kontorova model, we can develop a criterion that guarantees the correct symmetric core of the dislocation. Extending this treatment, we find a systematic recipe for constructing Finnis-Sinclair-type potentials that are able, as a matter of routine, produce non-degenerate core structures of 1/2 screw dislocations. Modelling thermally activated mobility of screw dislocations also requires that the transition pathway between stable core positions of a dislocation is accurately reproduced. DFT data indicates that the shape of the 'Peierls energy barrier' is a single-hump curve, including transitional configurations close to the so-called 'hard' structure. Interatomic potentials have, up

Interatomic Potential to Simulate Radiation Damage in Fe-Cr Alloys

International Nuclear Information System (INIS)

Bonny, G.; Pasianot, R.; Terentyev, D.; Malerba, L.

2011-01-01

The report presents an Fe-Cr interatomic potential to model high-Cr ferritic alloys. The potential is fitted to thermodynamic and point-defect properties obtained from density functional theory (DFT) calculations and experiments. The developed potential is also benchmarked against other potentials available in literature. It shows particularly good agreement with the DFT obtained mixing enthalpy of the random alloy, the formation energy of intermetallics and experimental excess vibrational entropy and phase diagram. In addition, DFT calculated point-defect properties, both interstitial and substitutional, are well reproduced, as is the screw dislocation core structure. As a first validation of the potential, we study the precipitation hardening of Fe-Cr alloys via static simulations of the interaction between Cr precipitates and screw dislocations. It is concluded that the description of the dislocation core modification near a precipitate might have a significant influence on the interaction mechanisms observed in dynamic simulations.

Interatomic Potential to Simulate Radiation Damage in Fe-Cr Alloys

Energy Technology Data Exchange (ETDEWEB)

Bonny, G.; Pasianot, R.; Terentyev, D.; Malerba, L.

2011-03-15

The report presents an Fe-Cr interatomic potential to model high-Cr ferritic alloys. The potential is fitted to thermodynamic and point-defect properties obtained from density functional theory (DFT) calculations and experiments. The developed potential is also benchmarked against other potentials available in literature. It shows particularly good agreement with the DFT obtained mixing enthalpy of the random alloy, the formation energy of intermetallics and experimental excess vibrational entropy and phase diagram. In addition, DFT calculated point-defect properties, both interstitial and substitutional, are well reproduced, as is the screw dislocation core structure. As a first validation of the potential, we study the precipitation hardening of Fe-Cr alloys via static simulations of the interaction between Cr precipitates and screw dislocations. It is concluded that the description of the dislocation core modification near a precipitate might have a significant influence on the interaction mechanisms observed in dynamic simulations.

On macromolecular refinement at subatomic resolution with interatomic scatterers

Energy Technology Data Exchange (ETDEWEB)

Afonine, Pavel V., E-mail: pafonine@lbl.gov; Grosse-Kunstleve, Ralf W.; Adams, Paul D. [Lawrence Berkeley National Laboratory, One Cyclotron Road, BLDG 64R0121, Berkeley, CA 94720 (United States); Lunin, Vladimir Y. [Institute of Mathematical Problems of Biology, Russian Academy of Sciences, Pushchino 142290 (Russian Federation); Urzhumtsev, Alexandre [IGMBC, 1 Rue L. Fries, 67404 Illkirch and IBMC, 15 Rue R. Descartes, 67084 Strasbourg (France); Faculty of Sciences, Nancy University, 54506 Vandoeuvre-lès-Nancy (France); Lawrence Berkeley National Laboratory, One Cyclotron Road, BLDG 64R0121, Berkeley, CA 94720 (United States)

2007-11-01

Modelling deformation electron density using interatomic scatters is simpler than multipolar methods, produces comparable results at subatomic resolution and can easily be applied to macromolecules. A study of the accurate electron-density distribution in molecular crystals at subatomic resolution (better than ∼1.0 Å) requires more detailed models than those based on independent spherical atoms. A tool that is conventionally used in small-molecule crystallography is the multipolar model. Even at upper resolution limits of 0.8–1.0 Å, the number of experimental data is insufficient for full multipolar model refinement. As an alternative, a simpler model composed of conventional independent spherical atoms augmented by additional scatterers to model bonding effects has been proposed. Refinement of these mixed models for several benchmark data sets gave results that were comparable in quality with the results of multipolar refinement and superior to those for conventional models. Applications to several data sets of both small molecules and macromolecules are shown. These refinements were performed using the general-purpose macromolecular refinement module phenix.refine of the PHENIX package.

A tungsten-rhenium interatomic potential for point defect studies

Science.gov (United States)

Setyawan, Wahyu; Gao, Ning; Kurtz, Richard J.

2018-05-01

A tungsten-rhenium (W-Re) classical interatomic potential is developed within the embedded atom method interaction framework. A force-matching method is employed to fit the potential to ab initio forces, energies, and stresses. Simulated annealing is combined with the conjugate gradient technique to search for an optimum potential from over 1000 initial trial sets. The potential is designed for studying point defects in W-Re systems. It gives good predictions of the formation energies of Re defects in W and the binding energies of W self-interstitial clusters with Re. The potential is further evaluated for describing the formation energy of structures in the σ and χ intermetallic phases. The predicted convex-hulls of formation energy are in excellent agreement with ab initio data. In pure Re, the potential can reproduce the formation energies of vacancies and self-interstitial defects sufficiently accurately and gives the correct ground state self-interstitial configuration. Furthermore, by including liquid structures in the fit, the potential yields a Re melting temperature (3130 K) that is close to the experimental value (3459 K).

Interplay of intra-atomic and interatomic effects: An investigation of the 2p core level spectra of atomic Fe and molecular FeCl2

International Nuclear Information System (INIS)

Richter, T.; Wolff, T.; Zimmermann, P.; Godehusen, K.; Martins, M.

2004-01-01

The 2p photoabsorption and photoelectron spectra of atomic Fe and molecular FeCl 2 were studied by photoion and photoelectron spectroscopy using monochromatized synchrotron radiation and atomic or molecular beam technique. The atomic spectra were analyzed with configuration interaction calculations yielding excellent agreement between experiment and theory. For the analysis of the molecular photoelectron spectrum which shows pronounced interatomic effects, a charge transfer model was used, introducing an additional 3d 7 configuration. The resulting good agreement between the experimental and theoretical spectrum and the remarkable similarity of the molecular with the corresponding spectrum in the solid phase opens a way to a better understanding of the interplay of the interatomic and intra-atomic interactions in the 2p core level spectra of the 3d metal compounds

Atomistic simulation of tantalum nanoindentation: Effects of indenter diameter, penetration velocity, and interatomic potentials on defect mechanisms and evolution

International Nuclear Information System (INIS)

Ruestes, C.J.; Stukowski, A.; Tang, Y.; Tramontina, D.R.; Erhart, P.; Remington, B.A.; Urbassek, H.M.; Meyers, M.A.; Bringa, E.M.

2014-01-01

Nanoindentation simulations are a helpful complement to experiments. There is a dearth of nanoindentation simulations for bcc metals, partly due to the lack of computationally efficient and reliable interatomic potentials at large strains. We carry out indentation simulations for bcc tantalum using three different interatomic potentials and present the defect mechanisms responsible for the creation and expansion of the plastic deformation zone: twins are initially formed, giving rise to shear loop expansion and the formation of sequential prismatic loops. The calculated elastic constants as function of pressure as well as stacking fault energy surfaces explain the significant differences found in the defect structures generated for the three potentials investigated in this study. The simulations enable the quantification of total dislocation length and twinning fraction. The indenter velocity is varied and, as expected, the penetration depth for the first pop-in (defect emission) event shows a strain rate sensitivity m in the range of 0.037–0.055. The effect of indenter diameter on the first pop-in is discussed. A new intrinsic length-scale model is presented based on the profile of the residual indentation and geometrically necessary dislocation theory

Atomistic simulation of tantalum nanoindentation: Effects of indenter diameter, penetration velocity, and interatomic potentials on defect mechanisms and evolution

Energy Technology Data Exchange (ETDEWEB)

Ruestes, C.J., E-mail: cjruestes@hotmail.com [Department of Mechanical and Aerospace Engineering, University of California, San Diego, La Jolla, CA 92093 (United States); Facultad de Ciencias Exactas y Naturales, Univ. Nac. de Cuyo, Mendoza 5500 (Argentina); CONICET, Mendoza 5500 (Argentina); Stukowski, A. [Technische Universität Darmstadt, Darmstadt 64287 (Germany); Tang, Y. [Shanghai Institute of Applied Mathematics and Mechanics, Shanghai University, Shanghai 200072 (China); Tramontina, D.R. [Facultad de Ciencias Exactas y Naturales, Univ. Nac. de Cuyo, Mendoza 5500 (Argentina); Erhart, P. [Chalmers University of Technology, Department of Applied Physics, Gothenburg 41296 (Sweden); Remington, B.A. [Lawrence Livermore National Lab, Livermore, CA 94550 (United States); Urbassek, H.M. [Physics Department and Research Center OPTIMAS, University of Kaiserslautern, Kaiserslautern 67663 (Germany); Meyers, M.A. [Department of Mechanical and Aerospace Engineering, University of California, San Diego, La Jolla, CA 92093 (United States); Bringa, E.M. [Facultad de Ciencias Exactas y Naturales, Univ. Nac. de Cuyo, Mendoza 5500 (Argentina); CONICET, Mendoza 5500 (Argentina)

2014-09-08

Nanoindentation simulations are a helpful complement to experiments. There is a dearth of nanoindentation simulations for bcc metals, partly due to the lack of computationally efficient and reliable interatomic potentials at large strains. We carry out indentation simulations for bcc tantalum using three different interatomic potentials and present the defect mechanisms responsible for the creation and expansion of the plastic deformation zone: twins are initially formed, giving rise to shear loop expansion and the formation of sequential prismatic loops. The calculated elastic constants as function of pressure as well as stacking fault energy surfaces explain the significant differences found in the defect structures generated for the three potentials investigated in this study. The simulations enable the quantification of total dislocation length and twinning fraction. The indenter velocity is varied and, as expected, the penetration depth for the first pop-in (defect emission) event shows a strain rate sensitivity m in the range of 0.037–0.055. The effect of indenter diameter on the first pop-in is discussed. A new intrinsic length-scale model is presented based on the profile of the residual indentation and geometrically necessary dislocation theory.

Sputtering of octatetraene by 15 keV C{sub 60} projectiles: Comparison of reactive interatomic potentials

Energy Technology Data Exchange (ETDEWEB)

Kanski, Michal; Maciazek, Dawid; Golunski, Mikolaj; Postawa, Zbigniew, E-mail: zbigniew.postawa@uj.edu.pl

2017-02-15

Highlights: • Probing the effect of interatomic potentials on sputtering of an octatetraene sample. • Problems with charge calculations are observed during cluster impact for ReaxFF. • COMB3 leads to a very low sputtering yield due to abrupt energy dissipation. • AIREBO is computationally the most efficient, while ReaxFF is more accurate. - Abstract: Molecular dynamics computer simulations have been used to probe the effect of the AIREBO, ReaxFF and COMB3 interatomic potentials on sputtering of an organic sample composed of octatetraene molecules. The system is bombarded by a 15 keV C{sub 60} projectile at normal incidence. The effect of the applied force fields on the total time of simulation, the calculated sputtering yield and the angular distribution of sputtered particles is investigated and discussed. It has been found that caution should be taken when simulating particles ejection from nonhomogeneous systems that undergo significant fragmentation described by the ReaxFF. In this case, the charge state of many particles is improper due to an inadequacy of a procedure used for calculating partial charges on atoms in molecules for conditions present during sputtering. A two-step simulation procedure is proposed to minimize the effect of this deficiency. There is also a possible problem with the COMB3 potential, at least at conditions present during cluster impact, as its results are very different from AIREBO or ReaxFF.

Retrieval of interatomic separations of molecules from laser-induced high-order harmonic spectra

International Nuclear Information System (INIS)

Le, Van-Hoang; Nguyen, Ngoc-Ty; Jin, C; Le, Anh-Thu; Lin, C D

2008-01-01

We illustrate an iterative method for retrieving the internuclear separations of N 2 , O 2 and CO 2 molecules using the high-order harmonics generated from these molecules by intense infrared laser pulses. We show that accurate results can be retrieved with a small set of harmonics and with one or few alignment angles of the molecules. For linear molecules the internuclear separations can also be retrieved from harmonics generated using isotropically distributed molecules. By extracting the transition dipole moment from the high-order harmonic spectra, we further demonstrated that it is preferable to retrieve the interatomic separation iteratively by fitting the extracted dipole moment. Our results show that time-resolved chemical imaging of molecules using infrared laser pulses with femtosecond temporal resolutions is possible

A general transformation to canonical form for potentials in pairwise interatomic interactions.

Science.gov (United States)

Walton, Jay R; Rivera-Rivera, Luis A; Lucchese, Robert R; Bevan, John W

2015-06-14

A generalized formulation of explicit force-based transformations is introduced to investigate the concept of a canonical potential in both fundamental chemical and intermolecular bonding. Different classes of representative ground electronic state pairwise interatomic interactions are referenced to a chosen canonical potential illustrating application of such transformations. Specifically, accurately determined potentials of the diatomic molecules H2, H2(+), HF, LiH, argon dimer, and one-dimensional dissociative coordinates in Ar-HBr, OC-HF, and OC-Cl2 are investigated throughout their bound potentials. Advantages of the current formulation for accurately evaluating equilibrium dissociation energies and a fundamentally different unified perspective on nature of intermolecular interactions will be emphasized. In particular, this canonical approach has significance to previous assertions that there is no very fundamental distinction between van der Waals bonding and covalent bonding or for that matter hydrogen and halogen bonds.

Hypothetical planar and nanotubular crystalline structures with five interatomic bonds of Kepler nets type

Directory of Open Access Journals (Sweden)

Aleksey I. Kochaev

2017-02-01

Full Text Available The possibility of metastable existence of planar and non-chiral nanotubular crystalline lattices in the form of Kepler nets of 34324, 3342, and 346 types (the notations are given in Schläfly symbols, using ab initio calculations, has researched. Atoms of P, As, Sb, Bi from 15th group and atoms of S, Se, Te from 16th group of the periodic table were taken into consideration. The lengths of interatomic bonds corresponding to the steadiest states for such were determined. We found that among these new composed structures crystals encountered strong elastic properties. Besides, some of them can possess pyroelectric and piezoelectric properties. Our results can be used for nanoelectronics and nanoelectromechanical devices designing.

Retrieval of interatomic separations of molecules from laser-induced high-order harmonic spectra

Energy Technology Data Exchange (ETDEWEB)

Le, Van-Hoang; Nguyen, Ngoc-Ty [Department of Physics, University of Pedagogy, 280 An Duong Vuong, Ward 5, Ho Chi Minh City (Viet Nam); Jin, C; Le, Anh-Thu; Lin, C D [J. R. Macdonald Laboratory, Department of Physics, Kansas State University, Manhattan, KS 66506 (United States)

2008-04-28

We illustrate an iterative method for retrieving the internuclear separations of N{sub 2}, O{sub 2} and CO{sub 2} molecules using the high-order harmonics generated from these molecules by intense infrared laser pulses. We show that accurate results can be retrieved with a small set of harmonics and with one or few alignment angles of the molecules. For linear molecules the internuclear separations can also be retrieved from harmonics generated using isotropically distributed molecules. By extracting the transition dipole moment from the high-order harmonic spectra, we further demonstrated that it is preferable to retrieve the interatomic separation iteratively by fitting the extracted dipole moment. Our results show that time-resolved chemical imaging of molecules using infrared laser pulses with femtosecond temporal resolutions is possible.

Development of an interatomic EAM type potential for Zr; Desarrollo de un potencial interatomico del tipo EAM para Zr

Energy Technology Data Exchange (ETDEWEB)

Pasianot, R C; Monti, A M [Comision Nacional de Energia Atomica, San Martin (Argentina). Unidad de Actividad Materiales

1997-12-31

In the present work are developed interatomic potentials of the embedded atom type (EAM) adequate for computer simulation of microstructural defects in the Zr lattice. It is observed that the less repulsive potential agrees better with the experimental data of the self-interstitial relaxation volume and predicts the basal crowdion as the stable configuration, the basal dumbbell having a formation energy slightly higher (0.01 eV). (author). 9 refs., 1 fig., 3 tabs.

Thermal conductance of suspended nanoribbons: interplay between strain and interatomic potential nonlinearity

Science.gov (United States)

Barreto, Roberto; Florencia Carusela, M.; Monastra, Alejandro G.

2017-10-01

We investigate the role that nonlinearity in the interatomic potential has on the thermal conductance of a suspended nanoribbon when it is subjected to a longitudinal strain. To focus on the first cubic and quartic nonlinear terms of a general potential, we propose an atomic system based on an α-β Fermi-Pasta-Ulam nearest neighbor interaction. We perform classical molecular dynamics simulations to investigate the contribution of longitudinal, transversal and flexural modes to the thermal conductance as a function of the α-β parameters and the applied strain. We compare the cases where atoms are allowed to vibrate only in plane (2D) with the case of vibrations in and out of plane (3D). We find that the dependence of conductance on α and β relies on a crossover phenomenon between linear/nonlinear delocalized/localized flexural and transversal modes, driven by an on/off switch of the strain.

Evidence of interatomic Coulombic decay in ArKr after Ar 2p Auger decay

International Nuclear Information System (INIS)

Morishita, Y; Saito, N; Suzuki, I H; Fukuzawa, H; Liu, X-J; Sakai, K; Pruemper, G; Ueda, K; Iwayama, H; Nagaya, K; Yao, M; Kreidi, K; Schoeffler, M; Jahnke, T; Schoessler, S; Doerner, R; Weber, T; Harries, J; Tamenori, Y

2008-01-01

We have identified interatomic Coulombic decay (ICD) processes in the ArKr dimer following Ar 2p Auger decay, using momentum-resolved electron-ion-ion coincidence spectroscopy and simultaneously determining the kinetic energy of the ICD electron and the KER between Ar 2+ and Kr + . We find that the spin-conserved ICD processes in which Ar 2+ (3p -3 3d) 1 P and 3 P decay to Ar 2+ (3p -2 ) 1 D and 3 P, respectively, ionizing the Kr atom, are significantly stronger than the spin-flip ICD processes in which Ar 2+ (3p -3 3d) 1 P and 3 P decay to Ar 2+ (3p -2 ) 3 P and 1 D, respectively

Induced dipole-dipole coupling between two atoms at a migration resonance

Science.gov (United States)

Kaur, Maninder; Mian, Mahmood

2018-05-01

Results of numerical simulations for the resonant energy exchange phenomenon called Migration reaction between two cold Rydberg atoms are presented. The effect of spatial interatomic distance on the onset of peculiar coherent mechanism is investigated. Observation of Rabi-like population inversion oscillation at the resonance provides a clear signature of dipole induced exchange of electronic excitations between the atoms. Further we present the results for the dependence of expectation value of the interaction hamiltonian on the interatomic distance, which is responsible for energy exchange process. The results of this observation endorse the range of inter atomic distance within which the excitation exchange process occurs completely or partially. Migration process enhance the Rydberg-Rydberg interaction in the absence of an external field, under the condition of the zero permanent dipole moments. Our next observation sheds light on the fundamental mechanism of induced electric fields initiated by the oscillating dipoles in such energy exchange processes. We explore the dependence of induced electric field on the interatomic distance and angle between the dipoles highlighting the inverse power law dependence and anisotropic property of the field. We put forward an idea to utilise the coherent energy exchange process to build efficient and fast energy transfer channels by incorporating more atoms organised at successive distances with decreasing distance gradient.

Conserved phosphoryl transfer mechanisms within kinase families and the role of the C8 proton of ATP in the activation of phosphoryl transfer

CSIR Research Space (South Africa)

Kenyon, CP

2012-03-01

Full Text Available mechanisms associated with 21 of the kinase families within 10 of the fold groups where sufficient structural information is available. To this end, the PDB (the database) was searched for structures repre- senting kinases within each family, based... in the ATP- and ADP-bound structures in the residues associated with the ?push? mechanism demon- strated significant reduction in the inter-atomic distances (PDB: 3M0E and 1NY6[14,15]. The inter-atomic distances for the ADP- and ATP-bound structures...

Probing the interatomic potential of solids with strong-field nonlinear phononics

Science.gov (United States)

von Hoegen, A.; Mankowsky, R.; Fechner, M.; Först, M.; Cavalleri, A.

2018-03-01

Nonlinear optical techniques at visible frequencies have long been applied to condensed matter spectroscopy. However, because many important excitations of solids are found at low energies, much can be gained from the extension of nonlinear optics to mid-infrared and terahertz frequencies. For example, the nonlinear excitation of lattice vibrations has enabled the dynamic control of material functions. So far it has only been possible to exploit second-order phonon nonlinearities at terahertz field strengths near one million volts per centimetre. Here we achieve an order-of-magnitude increase in field strength and explore higher-order phonon nonlinearities. We excite up to five harmonics of the A1 (transverse optical) phonon mode in the ferroelectric material lithium niobate. By using ultrashort mid-infrared laser pulses to drive the atoms far from their equilibrium positions, and measuring the large-amplitude atomic trajectories, we can sample the interatomic potential of lithium niobate, providing a benchmark for ab initio calculations for the material. Tomography of the energy surface by high-order nonlinear phononics could benefit many aspects of materials research, including the study of classical and quantum phase transitions.

Interplay of vacuum-mediated inter- and intra-atomic couplings in a pair of atoms

International Nuclear Information System (INIS)

Schmid, Sandra Isabelle; Evers, Joerg

2010-01-01

The resonance fluorescence emitted by a system of two dipole-dipole interacting nearby four-level atoms in a J=1/2↔J=1/2 configuration is studied. This setup is the simplest realistic model system which provides a complete description of the (inter-atomic) dipole-dipole interaction for arbitrary orientation of the inter-atomic distance vector, and at the same time allows for intra-atomic spontaneously generated coherences. Our main interest is the interplay of both these different coupling mechanisms. We discuss different methods to analyze the contribution of the various vacuum-induced coupling constants to the total resonance fluorescence spectrum. These allow us to find a dressed state interpretation of the contribution of the different inter-atomic dipole-dipole couplings to the total spectrum. We further study the role of the spontaneously generated coherences, and identify two different contributions to the single-particle vacuum-induced couplings. We show that they have a noticeable impact on the total resonance fluorescence spectrum down to small inter-atomic distances, even though the dipole-dipole coupling constants then are much larger in magnitude than the the single-particle coupling constants. Interestingly, we find that the inter-atomic couplings can induce an effect of the intra-atomic spontaneously generated coherences on the observed spectra which is not present in single-atom systems.

The role of tungsten in the change of interatomic bond in Nb-W alloy

International Nuclear Information System (INIS)

Arkharov, V.I.; Samojlenko, Z.A.; Darovskikh, E.G.

1982-01-01

To study the chemical inhomogeneity and the peculiarities in electronic structure of solid solutions in fracture region, the X-ray spectral studies of niobium-tungsten alloys with 0.5; 1.0; 12.0; 13.6; 23.g mass % W have been carried out. The W concentration changes on the fracture and the difference in the electron energy distribution in the 4d-band in comparison between the fracture and mocrosection are determined. The niobium doping with tungsten is shown to be accompanied by the increase in the fraction of locally bound electrons as compared to the collectivized one. Alloys with 12-13% W are the most homogeneous in composition and electrons energy state. This state is characterized by features the increased number of electrons with noncompensated spins in intercrystalline boundaries as compared to a crystallite thickness. These alloys have homogeneous properties in sample microvolumes and large interatomic binding force

Total scattering cross sections and interatomic potentials for neutral hydrogen and helium on some noble gases

International Nuclear Information System (INIS)

Ruzic, D.N.; Cohen, S.A.

1985-04-01

Measurements of energy-dependent scattering cross sections for 30 to 1800 eV D incident on He, Ne, Ar, and Kr, and for 40 to 850 eV He incident on He, Ar, and Kr are presented. They are determined by using the charge-exchange efflux from the Princeton Large Torus tokamak as a source of D or He. These neutrals are passed through a gas-filled scattering cell and detected by a time-of-flight spectrometer. The cross section for scattering greater than the effective angle of the apparatus (approx. =20 mrad) is found by measuring the energy-dependent attenuation of D or He as a function of pressure in the scattering cell. The interatomic potential is extracted from the data

Size-dependent disproportionation (in 2-20 nm regime) and hybrid Bond Valence derived interatomic potentials for BaTaO2N

Science.gov (United States)

Anbalagan, Kousika; Thomas, Tiju

2018-05-01

Interatomic potentials for complex materials (like ceramic systems) are important for realistic molecular dynamics (MD) simulations. Such simulations are relevant for understanding equilibrium, transport and dynamical properties of materials, especially in the nanoregime. Here we derive a hybrid interatomic potential (based on bond valence (BV) derived Morse and Coulomb terms), for modeling a complex ceramic, barium tantalum oxynitride (BaTaO2N). This material has been chosen due to its relevance for capacitive and photoactive applications. However, the material presents processing challenges such as the emergence of non-stoichiometric phases during processing, demonstrating complex processing-property correlations. This makes MD investigations of this material both scientifically and technologically relevant. The BV based hybrid potential presented here has been used for simulating sintering of BaTaO2N nanoparticles ( 2-20 nm) under different conditions (using the relevant canonical ensemble). Notably, we show that sintering of particles of diameter 10 nm in size results in the formation of a cluster of tantalum and oxygen atoms at the interface of the BaTaO2N particles. This is in agreement with the experimental reports. The results presented here suggest that the potential proposed can be used to explore dynamical properties of BaTaO2N and related systems. This work will also open avenues for development of nanoscience-enabled aid-free sintering approaches to this and related materials.

Role of interatomic bonding in the mechanical anisotropy and interlayer cohesion of CSH crystals

Energy Technology Data Exchange (ETDEWEB)

Dharmawardhana, C.C. [Department of Physics and Astronomy, University of Missouri—Kansas City, Kansas City, MO 64110 (United States); Misra, A. [Department of Civil, Environmental, and Architectural Engineering, University of Kansas, Lawrence, KS 66045 (United States); Aryal, S.; Rulis, P. [Department of Physics and Astronomy, University of Missouri—Kansas City, Kansas City, MO 64110 (United States); Ching, W.Y., E-mail: ccdxz8@mail.umkc.edu [Department of Physics and Astronomy, University of Missouri—Kansas City, Kansas City, MO 64110 (United States)

2013-10-15

Atomic scale properties of calcium silicate hydrate (CSH), the main binding phase of hardened Portland cement, are not well understood. Over a century of intense research has identified almost 50 different crystalline CSH minerals which are mainly categorized by their Ca/Si ratio. The electronic structure and interatomic bonding in four major CSH crystalline phases with structures close to those found in hardened cement are investigated via ab initio methods. Our result reveals the critical role of hydrogen bonding and importance of specifying precise locations for water molecules. Quantitative analysis of contributions from different bond types to the overall cohesion shows that while the Si-O covalent bonds dominate, the hydrogen bonding and Ca-O bonding are also very significant. Calculated results reveal the correlation between bond topology and interlayer cohesion. The overall bond order density (BOD) is found to be a more critical measure than the Ca/Si ratio in classifying different CSH crystals.

The effect of interatomic potential in molecular dynamics simulation of low energy ion implantation

International Nuclear Information System (INIS)

Chan, H.Y.; Nordlund, K.; Peltola, J.; Gossmann, H.-J.L.; Ma, N.L.; Srinivasan, M.P.; Benistant, F.; Chan, Lap

2005-01-01

Being able to accurately predict dopant profiles at sub-keV implant energies is critical for the microelectronic industry. Molecular Dynamics (MD), with its capability to account for multiple interactions as energy lowers, is an increasingly popular simulation method. We report our work on sub-keV implantation using MD and investigate the effect of different interatomic potentials on the range profiles. As an approximation, only pair potentials are considered in this work. Density Functional Theory (DFT) is used to calculate the pair potentials for a wide range of dopants (B, C, N, F, Si, P, Ga, Ge, As, In and Sb) in single crystalline silicon. A commonly used repulsive potential is also included in the study. Importance of the repulsive and attractive regions of the potential has been investigated with different elements and we show that a potential depicting the right attractive forces is especially important for heavy elements at low energies

Low-order moment expansions to tight binding for interatomic potentials: Successes and failures

International Nuclear Information System (INIS)

Kress, J.D.; Voter, A.F.

1995-01-01

We discuss the use of moment-based approximations to tight binding. Using a maximum entropy form for the electronic density of states, we show that a general interatomic potential can be defined that is suitable for molecular-dynamics simulations and has several other desirable features. For covalent materials (C and Si), properties where the atoms are in equivalent environments are well converged at low-order moments. For defect environments, which offer a more critical (and relevant) test, the method is found to give less satisfactory results. For example, the vacancy formation energy for Si is too low by ∼2 eV at 10 moments relative to exact tight binding. Attempts to improve the accuracy were unsuccessful, leading to the conclusion that potentials based on this approach are inadequate for covalent materials. We speculate that this may be a deficiency of low-order moment methods in general. For metals, in contrast to the covalent systems, we find that the low-order moment approach is better behaved. This finding is consistent with the success of existing empirical fourth-moment potentials for metals

Interatomic Coulombic decay following the Auger decay: Experimental evidence in rare-gas dimers

International Nuclear Information System (INIS)

Ueda, K.; Fukuzawa, H.; Liu, X.-J.; Sakai, K.; Pruemper, G.; Morishita, Y.; Saito, N.; Suzuki, I.H.; Nagaya, K.; Iwayama, H.; Yao, M.; Kreidi, K.; Schoeffler, M.; Jahnke, T.; Schoessler, S.; Doerner, R.; Weber, Th.; Harries, J.; Tamenori, Y.

2008-01-01

Interatomic Coulombic decay (ICD) in Ar 2 , ArKr and Kr 2 following Ar 2p or Kr 3d Auger decay has been investigated by means of momentum-resolved electron-ion-ion coincidence spectroscopy. This sequential decay leads to Coulombic dissociation into dication and monocation. Simultaneously determining the kinetic energy of the ICD electron and the kinetic energy release between the two atomic ions, we have been able to unambiguously identify the ICD channels. We find that, in general, spin-conserved ICD, in which the singlet (triplet) dicationic state produced via the atomic Auger decay preferentially decays to the singlet (triplet) state, transferring the energy to the other atom, is faster than spin-flip ICD, in which the Auger final singlet (triplet) dicationic state decays to the triplet (singlet) state. However, spin-flip ICD may take place when spin-conserved ICD becomes energetically forbidden. Dipole-forbidden ICDs from Kr 2+ (4s -21 S)-B (B = Ar or Kr) to Kr 2+ (4p -21 D, 3 P)-B + are also observed

Representing distance, consuming distance

DEFF Research Database (Denmark)

Larsen, Gunvor Riber

Title: Representing Distance, Consuming Distance Abstract: Distance is a condition for corporeal and virtual mobilities, for desired and actual travel, but yet it has received relatively little attention as a theoretical entity in its own right. Understandings of and assumptions about distance...... are being consumed in the contemporary society, in the same way as places, media, cultures and status are being consumed (Urry 1995, Featherstone 2007). An exploration of distance and its representations through contemporary consumption theory could expose what role distance plays in forming...

Assessment of structures and stabilities of defect clusters and surface energies predicted by nine interatomic potentials for UO{sub 2}

Energy Technology Data Exchange (ETDEWEB)

Taller, Stephen A. [School of Nuclear Engineering, Purdue University, West Lafayette, IN 47907 (United States); Bai, Xian-Ming, E-mail: xianming.bai@inl.gov [Fuels Modeling and Simulation Department, Idaho National Laboratory, Idaho Falls, ID 83415 (United States)

2013-11-15

The irradiation in nuclear reactors creates many point defects and defect clusters in uranium dioxide (UO{sub 2}) and their evolution severely degrades the thermal and mechanical properties of the nuclear fuels. Previously many empirical interatomic potentials have been developed for modeling defect production and evolution in UO{sub 2}. However, the properties of defect clusters and extended defects are usually not fitted into these potentials. In this work nine interatomic potentials for UO{sub 2} are examined by using molecular statics and molecular dynamics to assess their applicability in predicting the properties of various types of defect clusters in UO{sub 2}. The binding energies and structures for these defect clusters have been evaluated for each potential. In addition, the surface energies of voids of different radii and (1 1 0) flat surfaces predicted by these potentials are also evaluated. It is found that both good agreement and significant discrepancies exist for these potentials in predicting these properties. For oxygen interstitial clusters, these potentials predict significantly different defect cluster structures and stabilities; For defect clusters consisting of both uranium and oxygen defects, the prediction is in better agreement; The surface energies predicted by these potentials have significant discrepancies, and some of them are much higher than the experimentally measured values. The results from this work can provide insight on interpreting the outcome of atomistic modeling of defect production using these potentials and may provide guidelines for choosing appropriate potential models to study problems of interest in UO{sub 2}.

An interatomic potential model for molecular dynamics simulation of silicon etching by Br+-containing plasmas

International Nuclear Information System (INIS)

Ohta, H.; Iwakawa, A.; Eriguchi, K.; Ono, K.

2008-01-01

An interatomic potential model for Si-Br systems has been developed for performing classical molecular dynamics (MD) simulations. This model enables us to simulate atomic-scale reaction dynamics during Si etching processes by Br + -containing plasmas such as HBr and Br 2 plasmas, which are frequently utilized in state-of-the-art techniques for the fabrication of semiconductor devices. Our potential form is based on the well-known Stillinger-Weber potential function, and the model parameters were systematically determined from a database of potential energies obtained from ab initio quantum-chemical calculations using GAUSSIAN03. For parameter fitting, we propose an improved linear scheme that does not require any complicated nonlinear fitting as that in previous studies [H. Ohta and S. Hamaguchi, J. Chem. Phys. 115, 6679 (2001)]. In this paper, we present the potential derivation and simulation results of bombardment of a Si(100) surface using a monoenergetic Br + beam

Communication: Calculation of interatomic forces and optimization of molecular geometry with auxiliary-field quantum Monte Carlo

Science.gov (United States)

Motta, Mario; Zhang, Shiwei

2018-05-01

We propose an algorithm for accurate, systematic, and scalable computation of interatomic forces within the auxiliary-field quantum Monte Carlo (AFQMC) method. The algorithm relies on the Hellmann-Feynman theorem and incorporates Pulay corrections in the presence of atomic orbital basis sets. We benchmark the method for small molecules by comparing the computed forces with the derivatives of the AFQMC potential energy surface and by direct comparison with other quantum chemistry methods. We then perform geometry optimizations using the steepest descent algorithm in larger molecules. With realistic basis sets, we obtain equilibrium geometries in agreement, within statistical error bars, with experimental values. The increase in computational cost for computing forces in this approach is only a small prefactor over that of calculating the total energy. This paves the way for a general and efficient approach for geometry optimization and molecular dynamics within AFQMC.

On the doubly ionized states of Ar2 and their intra- and interatomic decay to Ar23+

International Nuclear Information System (INIS)

Stoychev, Spas D.; Kuleff, Alexander I.; Tarantelli, Francesco; Cederbaum, Lorenz S.

2008-01-01

Potential energy curves of the Auger state Ar + (2p -1 )-Ar, the different one- and two-site dicationic states Ar 2 ++ (with energies in the range of 32-77 eV), and the lowest two-site tricationic states Ar ++ -Ar + (with energies in the range of 64-76 eV) computed using elaborated ab initio methods are reported. The accessible relaxation channels of the electronic states of Ar ++ -Ar populated by Auger decay are studied. In particular, we study in detail the interatomic Coulombic decay following the population of one-site satellite states of Ar ++ (3s -1 3p -1 )-Ar recently observed experimentally. Other relaxation pathways of Ar ++ -Ar, including radiative charge transfer, nuclear dynamics through curve crossing, and intra-atomic decay processes are also investigated

Interatomic potentials from rainbow scattering of keV noble gas atoms under axial surface channeling

International Nuclear Information System (INIS)

Schueller, A.; Wethekam, S.; Mertens, A.; Maass, K.; Winter, H.; Gaertner, K.

2005-01-01

For grazing scattering of keV Ne and Ar atoms from a Ag(1 1 1) and a Cu(1 1 1) surface under axial surface channeling conditions we observe well defined peaks in the angular distributions for scattered projectiles. These peaks can be attributed to 'rainbow-scattering' and are closely related to the geometry of potential energy surfaces which can be approximated by the superposition of continuum potentials along strings of atoms in the surface plane. The dependence of rainbow angles on the scattering geometry provides stringent tests on the scattering potentials. From classical trajectory calculations based on universal (ZBL), adjusted Moliere (O'Connor and Biersack), and individual interatomic potentials we obtain corresponding rainbow angles for comparison with the experimental data. We find good overall agreement with the experiments for a description of trajectories based on adjusted Moliere and individual potentials, whereas the agreement is poorer for potentials with ZBL screening

Collective excitation frequencies and vortices of a Bose-Einstein condensed state with gravitylike interatomic attraction

International Nuclear Information System (INIS)

Ghosh, Tarun Kanti

2002-01-01

We study the collective excitations of a neutral atomic Bose-Einstein condensate with gravitylike 1/r interatomic attraction induced by an electromagnetic wave. Using the time-dependent variational approach, we derive an analytical spectrum for monopole and quadrupole mode frequencies of a gravitylike self-bound Bose condensed state at zero temperature. We also analyze the excitation frequencies of the Thomas-Fermi-gravity (TF-G) and gravity (G) regimes. Our result agrees excellently with that of Giovanazzi et al. [Europhysics Lett., 56, 1 (2001)], which is obtained within the sum-rule approach. We also consider the vortex state. We estimate the superfluid coherence length and the critical angular frequencies to create a vortex around the z axis. We find that the TF-G regime can exhibit the superfluid properties more prominently than the G regime. We find that the monopole mode frequency of the condensate decreases due to the presence of a vortex

Physical Realization of von Neumann Lattices in Rotating Bose Gases with Dipole Interatomic Interactions.

Science.gov (United States)

Cheng, Szu-Cheng; Jheng, Shih-Da

2016-08-22

This paper reports a novel type of vortex lattice, referred to as a bubble crystal, which was discovered in rapidly rotating Bose gases with long-range interactions. Bubble crystals differ from vortex lattices which possess a single quantum flux per unit cell, while atoms in bubble crystals are clustered periodically and surrounded by vortices. No existing model is able to describe the vortex structure of bubble crystals; however, we identified a mathematical lattice, which is a subset of coherent states and exists periodically in the physical space. This lattice is called a von Neumann lattice, and when it possesses a single vortex per unit cell, it presents the same geometrical structure as an Abrikosov lattice. In this report, we extend the von Neumann lattice to one with an integral number of flux quanta per unit cell and demonstrate that von Neumann lattices well reproduce the translational properties of bubble crystals. Numerical simulations confirm that, as a generalized vortex, a von Neumann lattice can be physically realized using vortex lattices in rapidly rotating Bose gases with dipole interatomic interactions.

DISTANCES TO DARK CLOUDS: COMPARING EXTINCTION DISTANCES TO MASER PARALLAX DISTANCES

International Nuclear Information System (INIS)

Foster, Jonathan B.; Jackson, James M.; Stead, Joseph J.; Hoare, Melvin G.; Benjamin, Robert A.

2012-01-01

We test two different methods of using near-infrared extinction to estimate distances to dark clouds in the first quadrant of the Galaxy using large near-infrared (Two Micron All Sky Survey and UKIRT Infrared Deep Sky Survey) surveys. Very long baseline interferometry parallax measurements of masers around massive young stars provide the most direct and bias-free measurement of the distance to these dark clouds. We compare the extinction distance estimates to these maser parallax distances. We also compare these distances to kinematic distances, including recent re-calibrations of the Galactic rotation curve. The extinction distance methods agree with the maser parallax distances (within the errors) between 66% and 100% of the time (depending on method and input survey) and between 85% and 100% of the time outside of the crowded Galactic center. Although the sample size is small, extinction distance methods reproduce maser parallax distances better than kinematic distances; furthermore, extinction distance methods do not suffer from the kinematic distance ambiguity. This validation gives us confidence that these extinction methods may be extended to additional dark clouds where maser parallaxes are not available.

Structure of gold monoatomic wires connected to two electrodes

Energy Technology Data Exchange (ETDEWEB)

Zoubkoff, Remi [Centre de Recherche en Matiere Condensee et Nanosciences, CNRS, Campus de Luminy, Case 913, 13288 Marseille Cedex 9 (France)]. E-mail: zoubkoff@crmcn.univ-mrs.fr; Vega, L. de la [Departamento de Fisica de la Materia Condensada C-V, Facultad de Ciencias, Universidad Autonoma de Madrid, E-28049 Madrid (Spain); Martin-Rodero, A. [Departamento de Fisica de la Materia Condensada C-V, Facultad de Ciencias, Universidad Autonoma de Madrid, E-28049 Madrid (Spain); Levy Yeyati, A. [Departamento de Fisica de la Materia Condensada C-V, Facultad de Ciencias, Universidad Autonoma de Madrid, E-28049 Madrid (Spain); Saul, Andres [Centre de Recherche en Matiere Condensee et Nanosciences, CNRS, Campus de Luminy, Case 913, 13288 Marseille Cedex 9 (France)

2007-09-01

In this work, we present calculations concerning the stability of infinite monoatomic Au wires and finite Au wires between electrodes. For the systems with the electrodes, that we represent by FCC slabs with (0 0 1) surfaces, the total energy calculations have been performed with a spd non-orthogonal tight-binding Hamiltonian. For the infinite wires, the calculations were also compared to semi-empirical and first principle ones. For the infinite wires and small enough inter-atomic distances, we find that a zig-zag structure is most stable than the linear one, in agreement with previous calculations. For the system between electrodes, one gets an almost concave or a symmetric broken edges structure depending on the inter-atomic distance.

EXAFS fit parameters for U sorption to nanoparticles in high salt water

Data.gov (United States)

U.S. Environmental Protection Agency — Table showing samples and associated scattering paths, interatomic distance, coordination number, energy shift, and error factors. This dataset is associated with...

Evaluation of interatomic potentials for noble gas atoms from rainbow scattering under axial channeling at Ag(1 1 1) surface by computer simulations based on binary collision approximation

Energy Technology Data Exchange (ETDEWEB)

Takeuchi, Wataru, E-mail: take@sp.ous.ac.jp

2016-01-01

The rainbow angles corresponding to pronounced peaks in the angular distributions of scattered projectiles with small angle, attributed to rainbow scattering (RS), under axial surface channeling conditions are strongly dependent on the interatomic potentials between projectiles and target atoms. The dependence of rainbow angles on normal energy of projectile energy to the target surface that has been experimentally obtained by Schüller and Winter (SW) (2007) for RS of He, Ne and Ar atoms from a Ag(1 1 1) surface with projectile energies of 3–60 keV was evaluated by the three-dimensional computer simulations using the ACOCT code based on the binary collision approximation with interatomic pair potentials. Consequently, the ACOCT results employing the Moliere pair potential with screening length correction close to adjustable one of O’Connor and Biersack (OB) formula are almost in agreement with the experimental ones, being self-consistent with the SW’s ones analyzed by computer simulations of classical trajectory calculations as RS from corrugated equipotential planes based on continuum potentials including the Moliere pair potential with screening length correction of the OB formula.

Evaluation of interatomic potentials for rainbow scattering under axial channeling at KCl(0 0 1) surface by three-dimensional computer simulations based on binary collision approximation

Energy Technology Data Exchange (ETDEWEB)

Takeuchi, Wataru, E-mail: take@sp.ous.ac.jp

2017-05-01

The rainbow angles corresponding to prominent peaks in the angular distributions of scattered projectiles with small angle, attributed to rainbow scattering (RS), under axial surface channeling conditions are strongly influenced by the interatomic potentials between projectiles and target atoms. The dependence of rainbow angles on normal energy of projectile energy to the target surface, being experimentally obtained by Specht et al. for RS of He, N, Ne and Ar atoms under 〈1 0 0〉 and 〈1 1 0〉 axial channeling conditions at a KCl(0 0 1) surface with projectile energies of 1–60 keV, was evaluated by the three-dimensional computer simulations using the ACOCT code based on the binary collision approximation with interatomic pair potentials. Good agreement between the ACOCT results using the ZBL pair potential and the individual pair potentials calculated from Hartree-Fock (HF) wave functions and the experimental ones was found for RS of He, N and Ne atoms from the atomic rows along 〈1 0 0〉 direction. For 〈1 1 0〉 direction, the ACOCT results employing the Moliere pair potential with adjustable screening length of O’Connor-Biersack (OB) formula, the ZBL pair potential and the individual HF pair potentials except for Ar → KCl using the OB pair potential are nearly in agreement with the experimental ones.

Microscopic parameters of heterostructures containing nanoclusters and thin layers of Ge in Si matrix

CERN Document Server

Erenburg, S B; Stepina, N P; Nikiforov, A I; Nenashev, A V; Mazalov, L N

2001-01-01

GeK XAFS measurements have been performed using the total electron yield detection mode for pseudomorphous Ge films deposited on Si(0 0 1) substrate via molecular beam epitaxy at 300 deg. C. The samples have been produced by thrice repeating the growing procedure separated by deposition of blocking Si layers at 500 deg. C. The local microstructure parameters (interatomic distances, Ge coordination numbers) are linked to nanostructure morphology and adequate models are suggested and discussed. It was established that pseudomorphous 4-monolayer Ge films contain 50% of Si atoms on the average. Pyramid-like, pure Ge islands formed in the Stranski-Krastanov growth are characterized by the interatomic Ge-Ge distances of 2.41 A (by 0.04 A less than in bulk Ge) and the Ge-Si distances of 2.37 A. It was revealed that the pure Ge nanoclusters are covered by a 1-2-monolayer film with admixture on the average of a 50% Si atom impurity from blocking Si layers.

Self-assembly of iodine in superfluid helium droplets. Halogen bonds and nanocrystals

Energy Technology Data Exchange (ETDEWEB)

He, Yunteng; Zhang, Jie; Lei, Lei; Kong, Wei [Department of Chemistry, Oregon State University, Corvallis, OR (United States)

2017-03-20

We present evidence of halogen bond in iodine clusters formed in superfluid helium droplets based on results from electron diffraction. Iodine crystals are known to form layered structures with intralayer halogen bonds, with interatomic distances shorter than the sum of the van der Waals radii of the two neighboring atoms. The diffraction profile of dimer dominated clusters embedded in helium droplets reveals an interatomic distance of 3.65 Aa, much closer to the value of 3.5 Aa in iodine crystals than to the van der Waals distance of 4.3 Aa. The profile from larger iodine clusters deviates from a single layer structure; instead, a bi-layer structure qualitatively fits the experimental data. This work highlights the possibility of small halogen bonded iodine clusters, albeit in a perhaps limited environment of superfluid helium droplets. The role of superfluid helium in guiding the trapped molecules into local potential minima awaits further investigation. (copyright 2017 Wiley-VCH Verlag GmbH and Co. KGaA, Weinheim)

Compressional behavior of solid NeHe2 up to 90 GPa

International Nuclear Information System (INIS)

Fukui, Hiroshi; Baron, Alfred Q R; Hirao, Naohisa; Ohishi, Yasuo

2010-01-01

NeHe 2 was compressed to about 90 GPa using a diamond anvil cell technique. The crystal structure was confirmed to be stable with hexagonal symmetry in the investigated pressure range and its p-V equation of state was determined by angular dispersive x-ray diffraction with synchrotron radiation. With the help of ab initio calculations, the compressibility and inter-atomic distances of NeHe 2 were compared with those of a helium and neon mixture of the same composition. This study shows that the bulk modulus of NeHe 2 is between those of neon and helium and that linear compressibilities of the inter-atomic distances are different from those of the elementary solids. This material can be a pressure-transmitting medium, providing both a large sample space and good quasi-hydrostatic conditions.

Analytical method for estimating the thermal expansion coefficient of metals at high temperature

International Nuclear Information System (INIS)

Takamoto, S; Izumi, S; Nakata, T; Sakai, S; Oinuma, S; Nakatani, Y

2015-01-01

In this paper, we propose an analytical method for estimating the thermal expansion coefficient (TEC) of metals at high-temperature ranges. Although the conventional method based on quasiharmonic approximation (QHA) shows good results at low temperatures, anharmonic effects caused by large-amplitude thermal vibrations reduces its accuracy at high temperatures. Molecular dynamics (MD) naturally includes the anharmonic effect. However, since the computational cost of MD is relatively high, in order to make an interatomic potential capable of reproducing TEC, an analytical method is essential. In our method, analytical formulation of the radial distribution function (RDF) at finite temperature realizes the estimation of the TEC. Each peak of the RDF is approximated by the Gaussian distribution. The average and variance of the Gaussian distribution are formulated by decomposing the fluctuation of interatomic distance into independent elastic waves. We incorporated two significant anharmonic effects into the method. One is the increase in the averaged interatomic distance caused by large amplitude vibration. The second is the variation in the frequency of elastic waves. As a result, the TECs of fcc and bcc crystals estimated by our method show good agreement with those of MD. Our method enables us to make an interatomic potential that reproduces the TEC at high temperature. We developed the GEAM potential for nickel. The TEC of the fitted potential showed good agreement with experimental data from room temperature to 1000 K. As compared with the original potential, it was found that the third derivative of the wide-range curve was modified, while the zeroth, first and second derivatives were unchanged. This result supports the conventional theory of solid state physics. We believe our analytical method and developed interatomic potential will contribute to future high-temperature material development. (paper)

Spectral neighbor analysis method for automated generation of quantum-accurate interatomic potentials

International Nuclear Information System (INIS)

Thompson, A.P.; Swiler, L.P.; Trott, C.R.; Foiles, S.M.; Tucker, G.J.

2015-01-01

We present a new interatomic potential for solids and liquids called Spectral Neighbor Analysis Potential (SNAP). The SNAP potential has a very general form and uses machine-learning techniques to reproduce the energies, forces, and stress tensors of a large set of small configurations of atoms, which are obtained using high-accuracy quantum electronic structure (QM) calculations. The local environment of each atom is characterized by a set of bispectrum components of the local neighbor density projected onto a basis of hyperspherical harmonics in four dimensions. The bispectrum components are the same bond-orientational order parameters employed by the GAP potential [1]. The SNAP potential, unlike GAP, assumes a linear relationship between atom energy and bispectrum components. The linear SNAP coefficients are determined using weighted least-squares linear regression against the full QM training set. This allows the SNAP potential to be fit in a robust, automated manner to large QM data sets using many bispectrum components. The calculation of the bispectrum components and the SNAP potential are implemented in the LAMMPS parallel molecular dynamics code. We demonstrate that a previously unnoticed symmetry property can be exploited to reduce the computational cost of the force calculations by more than one order of magnitude. We present results for a SNAP potential for tantalum, showing that it accurately reproduces a range of commonly calculated properties of both the crystalline solid and the liquid phases. In addition, unlike simpler existing potentials, SNAP correctly predicts the energy barrier for screw dislocation migration in BCC tantalum

Spectral neighbor analysis method for automated generation of quantum-accurate interatomic potentials

Energy Technology Data Exchange (ETDEWEB)

Thompson, Aidan P. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States). Multiscale Science Dept.; Swiler, Laura P. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States). Optimization and Uncertainty Quantification Dept.; Trott, Christian R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Scalable Algorithms Dept.; Foiles, Stephen M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Computational Materials and Data Science Dept.; Tucker, Garritt J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Computational Materials and Data Science Dept.; Drexel Univ., Philadelphia, PA (United States). Dept. of Materials Science and Engineering

2015-03-15

Here, we present a new interatomic potential for solids and liquids called Spectral Neighbor Analysis Potential (SNAP). The SNAP potential has a very general form and uses machine-learning techniques to reproduce the energies, forces, and stress tensors of a large set of small configurations of atoms, which are obtained using high-accuracy quantum electronic structure (QM) calculations. The local environment of each atom is characterized by a set of bispectrum components of the local neighbor density projected onto a basis of hyperspherical harmonics in four dimensions. The bispectrum components are the same bond-orientational order parameters employed by the GAP potential [1]. The SNAP potential, unlike GAP, assumes a linear relationship between atom energy and bispectrum components. The linear SNAP coefficients are determined using weighted least-squares linear regression against the full QM training set. This allows the SNAP potential to be fit in a robust, automated manner to large QM data sets using many bispectrum components. The calculation of the bispectrum components and the SNAP potential are implemented in the LAMMPS parallel molecular dynamics code. We demonstrate that a previously unnoticed symmetry property can be exploited to reduce the computational cost of the force calculations by more than one order of magnitude. We present results for a SNAP potential for tantalum, showing that it accurately reproduces a range of commonly calculated properties of both the crystalline solid and the liquid phases. In addition, unlike simpler existing potentials, SNAP correctly predicts the energy barrier for screw dislocation migration in BCC tantalum.

Spectral neighbor analysis method for automated generation of quantum-accurate interatomic potentials

Energy Technology Data Exchange (ETDEWEB)

Thompson, A.P., E-mail: athomps@sandia.gov [Multiscale Science Department, Sandia National Laboratories, PO Box 5800, MS 1322, Albuquerque, NM 87185 (United States); Swiler, L.P., E-mail: lpswile@sandia.gov [Optimization and Uncertainty Quantification Department, Sandia National Laboratories, PO Box 5800, MS 1318, Albuquerque, NM 87185 (United States); Trott, C.R., E-mail: crtrott@sandia.gov [Scalable Algorithms Department, Sandia National Laboratories, PO Box 5800, MS 1322, Albuquerque, NM 87185 (United States); Foiles, S.M., E-mail: foiles@sandia.gov [Computational Materials and Data Science Department, Sandia National Laboratories, PO Box 5800, MS 1411, Albuquerque, NM 87185 (United States); Tucker, G.J., E-mail: gtucker@coe.drexel.edu [Computational Materials and Data Science Department, Sandia National Laboratories, PO Box 5800, MS 1411, Albuquerque, NM 87185 (United States); Department of Materials Science and Engineering, Drexel University, Philadelphia, PA 19104 (United States)

2015-03-15

We present a new interatomic potential for solids and liquids called Spectral Neighbor Analysis Potential (SNAP). The SNAP potential has a very general form and uses machine-learning techniques to reproduce the energies, forces, and stress tensors of a large set of small configurations of atoms, which are obtained using high-accuracy quantum electronic structure (QM) calculations. The local environment of each atom is characterized by a set of bispectrum components of the local neighbor density projected onto a basis of hyperspherical harmonics in four dimensions. The bispectrum components are the same bond-orientational order parameters employed by the GAP potential [1]. The SNAP potential, unlike GAP, assumes a linear relationship between atom energy and bispectrum components. The linear SNAP coefficients are determined using weighted least-squares linear regression against the full QM training set. This allows the SNAP potential to be fit in a robust, automated manner to large QM data sets using many bispectrum components. The calculation of the bispectrum components and the SNAP potential are implemented in the LAMMPS parallel molecular dynamics code. We demonstrate that a previously unnoticed symmetry property can be exploited to reduce the computational cost of the force calculations by more than one order of magnitude. We present results for a SNAP potential for tantalum, showing that it accurately reproduces a range of commonly calculated properties of both the crystalline solid and the liquid phases. In addition, unlike simpler existing potentials, SNAP correctly predicts the energy barrier for screw dislocation migration in BCC tantalum.

Anharmonic correlated Debye model high-order expanded interatomic effective potential and Debye-Waller factors of bcc crystals

Energy Technology Data Exchange (ETDEWEB)

Van Hung, Nguyen, E-mail: hungnv@vnu.edu.vn [Department of Physics, Hanoi University of Science, 334 Nguyen Trai, Thanh Xuan, Hanoi (Viet Nam); Hue, Trinh Thi [Department of Physics, Hanoi University of Science, 334 Nguyen Trai, Thanh Xuan, Hanoi (Viet Nam); Khoa, Ha Dang [School of Engineering Physics, Hanoi University of Science and Technology, 1 Dai Co Viet, Hanoi (Viet Nam); Vuong, Dinh Quoc [Quang Ninh Education & Training Department, Nguyen Van Cu, Ha Long, Quang Ninh (Viet Nam)

2016-12-15

High-order expanded interatomic effective potential and Debye-Waller factors (DWFs) for local vibrational amplitudes in X-ray absorption fine structure (XAFS) of bcc crystals have been studied based on the anharmonic correlated Debye model. DWFs are presented in terms of cumulant expansion up to the fourth order and the many-body effects are taken into account in the present one-dimensional model based on the first shell near neighbor contribution approach used in the derivations of the anharmonic effective potential and XAFS cumulants where Morse potential is assumed to describe the single-pair atomic interaction. Analytical expressions for the dispersion relation, correlated Debye frequency and temperature and four first temperature-dependent XAFS cumulants have been derived based on the many-body perturbation approach. Thermodynamic properties and anharmonic effects in XAFS of bcc crystals described by the obtained cumulants have been in detail discussed. The advantage and efficiency of the present theory are illustrated by good agreement of the numerical results for Mo, Fe and W with experiment.

Bis{6,6′-dimethoxy-2,2′-[ethane-1,2-diylbis(iminomethylene]diphenolato(1.5−-κ4O,N,N′,O′}praeseodymium(III

Directory of Open Access Journals (Sweden)

Da-Qi Wang

2009-02-01

Full Text Available The title compound, [Pr(C18H22.5N2O42], is isotypic with its Er and Tb analogues. All interatomic distances, angles and the hydrogen bond geometry are very similar for the three structures..

Crystal structure of isomeric boron difluoride acetylnaphtholates

International Nuclear Information System (INIS)

Bukvetskij, B.V.; Fedorenko, E.V.; Mirochnik, A.G.; Karasev, V.E.

2006-01-01

Crystal structures of luminescent isomeric acetylnaphtholates of boron difluoride are investigated. Full X-ray structural analysis is done at 293 K. Coordinated of atoms, bond angles, bond lengths, interatomic distances are determined. Results of comparative evaluations of the isomers are represented [ru

Local atomic structure of Zr-Cu and Zr-Cu-Al amorphous alloys investigated by EXAFS method

International Nuclear Information System (INIS)

Antonowicz, J.; Pietnoczka, A.; Zalewski, W.; Bacewicz, R.; Stoica, M.; Georgarakis, K.; Yavari, A.R.

2011-01-01

Research highlights: → Coordination number, interatomic distances and mean square atomic displacement in Zr-Cu and Zr-Cu-Al glasses. → Icosahedral symmetry in local atomic structure. → Deviation from random mixing behavior resulting from Al addition. - Abstract: We report on extended X-ray absorption fine structure (EXAFS) study of rapidly quenched Zr-Cu and Zr-Cu-Al glassy alloys. The local atomic order around Zr and Cu atoms was investigated. From the EXAFS data fitting the values of coordination number, interatomic distances and mean square atomic displacement were obtained for wide range of compositions. It was found that icosahedral symmetry rather than that of corresponding crystalline analogs dominates in the local atomic structure of Zr-Cu and Zr-Cu-Al amorphous alloys. Judging from bonding preferences we conclude that addition of Al as an alloying element results in considerable deviation from random mixing behavior observed in binary Zr-Cu alloys.

PERBANDINGAN EUCLIDEAN DISTANCE DENGAN CANBERRA DISTANCE PADA FACE RECOGNITION

Directory of Open Access Journals (Sweden)

Sendhy Rachmat Wurdianarto

2014-08-01

Full Text Available Perkembangan ilmu pada dunia komputer sangatlah pesat. Salah satu yang menandai hal ini adalah ilmu komputer telah merambah pada dunia biometrik. Arti biometrik sendiri adalah karakter-karakter manusia yang dapat digunakan untuk membedakan antara orang yang satu dengan yang lainnya. Salah satu pemanfaatan karakter / organ tubuh pada setiap manusia yang digunakan untuk identifikasi (pengenalan adalah dengan memanfaatkan wajah. Dari permasalahan diatas dalam pengenalan lebih tentang aplikasi Matlab pada Face Recognation menggunakan metode Euclidean Distance dan Canberra Distance. Model pengembangan aplikasi yang digunakan adalah model waterfall. Model waterfall beriisi rangkaian aktivitas proses yang disajikan dalam proses analisa kebutuhan, desain menggunakan UML (Unified Modeling Language, inputan objek gambar diproses menggunakan Euclidean Distance dan Canberra Distance. Kesimpulan yang dapat ditarik adalah aplikasi face Recognation menggunakan metode euclidean Distance dan Canverra Distance terdapat kelebihan dan kekurangan masing-masing. Untuk kedepannya aplikasi tersebut dapat dikembangkan dengan menggunakan objek berupa video ataupun objek lainnya.   Kata kunci : Euclidean Distance, Face Recognition, Biometrik, Canberra Distance

Theoretical Aspects of Phonon Dispersion Curves for Metals

International Nuclear Information System (INIS)

Cochran, W.

1965-01-01

Reasonably complete knowledge of the phonon dispersion curves for at least a dozen metallic elements and intermetallic compounds has now been obtained from neutron inelastic scattering experiments. The results have one feature in common: when analysed in terms of interatomic force constants they reveal the presence of comparatively long-range forces extending over several atomic spacings. The results for lead are particularly interesting; it did not prove possible to fit them by a force-constant model, but the dispersion curves for wave vectors in symmetry directions when analysed in terms of force constants between planes of atoms showed an oscillatory interatomic potential extending over distances of more than 20Å. This review is concerned with recent theoretical work which has a bearing on the calculation of phonon dispersion curves for metals and the explanation of the long range of the interatomic potential. The best hope at present for a general treatment of atomic interaction in metals appears to lie in the ''method of neutral pseudo-atoms'', (a description recently coined by Ziman). This approximate theory is outlined and its relevance to Kohn anomalies in phonon dispersion curves is discussed. Experimental data for sodium is consistent with the theory, and the interatomic potential in sodium varies periodically in a distance π/k F , where fik F is the Fermi momentum, as has already been demonstrated by Koenig in a different way. More exact calculations have been made for sodium by Toya and by Sham. The relationship between the different methods and other work of a more general character such as that of Harrison are discussed. (author) [fr

Encyclopedia of distances

CERN Document Server

Deza, Michel Marie

2016-01-01

This 4th edition of the leading reference volume on distance metrics is characterized by updated and rewritten sections on some items suggested by experts and readers, as well a general streamlining of content and the addition of essential new topics. Though the structure remains unchanged, the new edition also explores recent advances in the use of distances and metrics for e.g. generalized distances, probability theory, graph theory, coding theory, data analysis. New topics in the purely mathematical sections include e.g. the Vitanyi multiset-metric, algebraic point-conic distance, triangular ratio metric, Rossi-Hamming metric, Taneja distance, spectral semimetric between graphs, channel metrization, and Maryland bridge distance. The multidisciplinary sections have also been supplemented with new topics, including: dynamic time wrapping distance, memory distance, allometry, atmospheric depth, elliptic orbit distance, VLBI distance measurements, the astronomical system of units, and walkability distance. Lea...

Distance Learning

National Research Council Canada - National Science Library

Braddock, Joseph

1997-01-01

A study reviewing the existing Army Distance Learning Plan (ADLP) and current Distance Learning practices, with a focus on the Army's training and educational challenges and the benefits of applying Distance Learning techniques...

Interatomic potential to predict the favored and optimized compositions for ternary Cu-Zr-Hf metallic glasses

International Nuclear Information System (INIS)

Luo, S. Y.; Cui, Y. Y.; Dai, Y.; Li, J. H.; Liu, B. X.

2012-01-01

Under the framework of smoothed and long range second-moment approximation of tight-binding, a realistic interatomic potential was first constructed for the Cu-Zr-Hf ternary metal system. Applying the constructed potential, Monte Carlo simulations were carried out to compare the relative stability of crystalline solid solution versus its disordered counterpart over the entire composition triangle of the system (as a function of alloy composition). Simulations not only reveal that the origin of metallic glass formation but also determine, in the composition triangle, a quadrilateral region, within which metallic glass formation is energetically favored. It is proposed to define the energy differences between the crystalline solid solutions and disordered states as the driving force for amorphization and the corresponding calculations pinpoint an optimized composition locating at an composition of Cu 55 Zr 10 Hf 35 , around which the driving force for metallic glass formation reaches its maximum, suggesting that the ternary Cu-Zr-Hf metallic glasses designed to have the compositions around Cu 55 Zr 10 Hf 35 could be more stable than other alloys in the system. Moreover, for the Cu 55 Zr 10 Hf 35 metallic glass, the Voronoi tessellation calculations reveal some interesting features of its atomic configurations and coordination polyhedra distribution.

REPRESENTATIONS OF DISTANCE: DIFFERENCES IN UNDERSTANDING DISTANCE ACCORDING TO TRAVEL METHOD

Directory of Open Access Journals (Sweden)

Gunvor Riber Larsen

2017-12-01

Full Text Available This paper explores how Danish tourists represent distance in relation to their holiday mobility and how these representations of distance are a result of being aero-mobile as opposed to being land-mobile. Based on interviews with Danish tourists, whose holiday mobility ranges from the European continent to global destinations, the first part of this qualitative study identifies three categories of representations of distance that show how distance is being ‘translated’ by the tourists into non-geometric forms: distance as resources, distance as accessibility, and distance as knowledge. The representations of distance articulated by the Danish tourists show that distance is often not viewed in ‘just’ kilometres. Rather, it is understood in forms that express how transcending the physical distance through holiday mobility is dependent on individual social and economic contexts, and on whether the journey was undertaken by air or land. The analysis also shows that being aeromobile is the holiday transportation mode that removes the tourists the furthest away from physical distance, resulting in the distance travelled by air being represented in ways that have the least correlation, in the tourists’ minds, with physical distance measured in kilometres.

Investigating energy-based pool structure selection in the structure ensemble modeling with experimental distance constraints: The example from a multidomain protein Pub1.

Science.gov (United States)

Zhu, Guanhua; Liu, Wei; Bao, Chenglong; Tong, Dudu; Ji, Hui; Shen, Zuowei; Yang, Daiwen; Lu, Lanyuan

2018-05-01

The structural variations of multidomain proteins with flexible parts mediate many biological processes, and a structure ensemble can be determined by selecting a weighted combination of representative structures from a simulated structure pool, producing the best fit to experimental constraints such as interatomic distance. In this study, a hybrid structure-based and physics-based atomistic force field with an efficient sampling strategy is adopted to simulate a model di-domain protein against experimental paramagnetic relaxation enhancement (PRE) data that correspond to distance constraints. The molecular dynamics simulations produce a wide range of conformations depicted on a protein energy landscape. Subsequently, a conformational ensemble recovered with low-energy structures and the minimum-size restraint is identified in good agreement with experimental PRE rates, and the result is also supported by chemical shift perturbations and small-angle X-ray scattering data. It is illustrated that the regularizations of energy and ensemble-size prevent an arbitrary interpretation of protein conformations. Moreover, energy is found to serve as a critical control to refine the structure pool and prevent data overfitting, because the absence of energy regularization exposes ensemble construction to the noise from high-energy structures and causes a more ambiguous representation of protein conformations. Finally, we perform structure-ensemble optimizations with a topology-based structure pool, to enhance the understanding on the ensemble results from different sources of pool candidates. © 2018 Wiley Periodicals, Inc.

Covalent-bond stabilization of the Si(111)-(3 1 -1 1)-Pb structure

DEFF Research Database (Denmark)

Kumpf, C.; Nielsen, M.; Feidenhans'l, R.

2001-01-01

by codeposition of Pb and Sn. Our surface X-ray diffraction measurements prove that the alloy structure is closely related to the low-temperature reconstruction. The interatomic distances reveal the nature of the chemical bonding in the surface layer and provide insight into the mechanism stabilizing...

Encyclopedia of distances

CERN Document Server

Deza, Michel Marie

2014-01-01

This updated and revised third edition of the leading reference volume on distance metrics includes new items from very active research areas in the use of distances and metrics such as geometry, graph theory, probability theory and analysis. Among the new topics included are, for example, polyhedral metric space, nearness matrix problems, distances between belief assignments, distance-related animal settings, diamond-cutting distances, natural units of length, Heidegger’s de-severance distance, and brain distances. The publication of this volume coincides with intensifying research efforts into metric spaces and especially distance design for applications. Accurate metrics have become a crucial goal in computational biology, image analysis, speech recognition and information retrieval. Leaving aside the practical questions that arise during the selection of a ‘good’ distance function, this work focuses on providing the research community with an invaluable comprehensive listing of the main available di...

Orientation-dependent crystal instability of gamma-TiAl in nanoindentation investigated by a multiscale interatomic potential finite-element model

International Nuclear Information System (INIS)

Xiong, Kai; Liu, Xiaohui; Gu, Jianfeng

2014-01-01

The anisotropic mechanical behavior of γ-TiAl alloys has been observed and repeatedly reported, but the effect of crystallographic orientations on the crystal instability of γ-TiAl is still unclear. In this paper, the orientation-dependent crystal instability of γ-TiAl single crystals was investigated by performing nanoindentation on different crystal surfaces. All the nanoindentations are simulated using an interatomic potential finite-element model (IPFEM). Simulation results show that the load–displacement curves, critical indentation depth and critical load for crystal instability as well as indentation modulus, are all associated with surface orientations. The active slip systems and the location of crystal instability in five typical nanoindentations are analyzed in detail, i.e. the (0 0 1), (1 0 0), (1 0 1), (1 1 0) and (1 1 1) crystal surfaces. The predicted crystal instability sites and the activated slipping systems in the IPFEM simulations are in good agreement with the dislocation nucleation in molecular dynamics simulations. (paper)

Interface Simulation Distances

Directory of Open Access Journals (Sweden)

Pavol Černý

2012-10-01

Full Text Available The classical (boolean notion of refinement for behavioral interfaces of system components is the alternating refinement preorder. In this paper, we define a distance for interfaces, called interface simulation distance. It makes the alternating refinement preorder quantitative by, intuitively, tolerating errors (while counting them in the alternating simulation game. We show that the interface simulation distance satisfies the triangle inequality, that the distance between two interfaces does not increase under parallel composition with a third interface, and that the distance between two interfaces can be bounded from above and below by distances between abstractions of the two interfaces. We illustrate the framework, and the properties of the distances under composition of interfaces, with two case studies.

Reducing the distance in distance-caregiving by technology innovation

Directory of Open Access Journals (Sweden)

Lazelle E Benefield

2007-07-01

Full Text Available Lazelle E Benefield1, Cornelia Beck21College of Nursing, University of Oklahoma Health Sciences Center, Oklahoma City, Oklahoma, USA; 2Pat & Willard Walker Family Memory Research Center, University of Arkansas for Medical Sciences, Little Rock, Arkansas, USAAbstract: Family caregivers are responsible for the home care of over 34 million older adults in the United States. For many, the elder family member lives more than an hour’s distance away. Distance caregiving is a growing alternative to more familiar models where: 1 the elder and the family caregiver(s may reside in the same household; or 2 the family caregiver may live nearby but not in the same household as the elder. The distance caregiving model involves elders and their family caregivers who live at some distance, defined as more than a 60-minute commute, from one another. Evidence suggests that distance caregiving is a distinct phenomenon, differs substantially from on-site family caregiving, and requires additional assistance to support the physical, social, and contextual dimensions of the caregiving process. Technology-based assists could virtually connect the caregiver and elder and provide strong support that addresses the elder’s physical, social, cognitive, and/or sensory impairments. Therefore, in today’s era of high technology, it is surprising that so few affordable innovations are being marketed for distance caregiving. This article addresses distance caregiving, proposes the use of technology innovation to support caregiving, and suggests a research agenda to better inform policy decisions related to the unique needs of this situation.Keywords: caregiving, family, distance, technology, elders

Censoring distances based on labeled cortical distance maps in cortical morphometry.

Science.gov (United States)

Ceyhan, Elvan; Nishino, Tomoyuki; Alexopolous, Dimitrios; Todd, Richard D; Botteron, Kelly N; Miller, Michael I; Ratnanather, J Tilak

2013-01-01

It has been demonstrated that shape differences in cortical structures may be manifested in neuropsychiatric disorders. Such morphometric differences can be measured by labeled cortical distance mapping (LCDM) which characterizes the morphometry of the laminar cortical mantle of cortical structures. LCDM data consist of signed/labeled distances of gray matter (GM) voxels with respect to GM/white matter (WM) surface. Volumes and other summary measures for each subject and the pooled distances can help determine the morphometric differences between diagnostic groups, however they do not reveal all the morphometric information contained in LCDM distances. To extract more information from LCDM data, censoring of the pooled distances is introduced for each diagnostic group where the range of LCDM distances is partitioned at a fixed increment size; and at each censoring step, the distances not exceeding the censoring distance are kept. Censored LCDM distances inherit the advantages of the pooled distances but also provide information about the location of morphometric differences which cannot be obtained from the pooled distances. However, at each step, the censored distances aggregate, which might confound the results. The influence of data aggregation is investigated with an extensive Monte Carlo simulation analysis and it is demonstrated that this influence is negligible. As an illustrative example, GM of ventral medial prefrontal cortices (VMPFCs) of subjects with major depressive disorder (MDD), subjects at high risk (HR) of MDD, and healthy control (Ctrl) subjects are used. A significant reduction in laminar thickness of the VMPFC in MDD and HR subjects is observed compared to Ctrl subjects. Moreover, the GM LCDM distances (i.e., locations with respect to the GM/WM surface) for which these differences start to occur are determined. The methodology is also applicable to LCDM-based morphometric measures of other cortical structures affected by disease.

Censoring Distances Based on Labeled Cortical Distance Maps in Cortical Morphometry

Directory of Open Access Journals (Sweden)

Elvan eCeyhan

2013-10-01

Full Text Available It has been demonstrated that shape differences are manifested in cortical structures due to neuropsychiatric disorders. Such morphometric differences can be measured by labeled cortical distance mapping (LCDM which characterizes the morphometry of the laminar cortical mantle of cortical structures. LCDM data consist of signed/labeled distances of gray matter (GM voxels with respect to GM/white matter (WM surface. Volumes and other summary measures for each subject and the pooled distances can help determine the morphometric differences between diagnostic groups, however they do not reveal all the morphometric information con-tained in LCDM distances. To extract more information from LCDM data, censoring of the pooled distances is introduced for each diagnostic group where the range of LCDM distances is partitioned at a fixed increment size; and at each censoring step, the distances not exceeding the censoring distance are kept. Censored LCDM distances inherit the advantages of the pooled distances but also provide information about the location of morphometric differences which cannot be obtained from the pooled distances. However, at each step, the censored distances aggregate, which might confound the results. The influence of data aggregation is investigated with an extensive Monte Carlo simulation analysis and it is demonstrated that this influence is negligible. As an illustrative example, GM of ventral medial prefrontal cortices (VMPFCs of subjects with major depressive disorder (MDD, subjects at high risk (HR of MDD, and healthy control (Ctrl subjects are used. A significant reduction in laminar thickness of the VMPFC in MDD and HR subjects is observed compared to Ctrl subjects. Moreover, the GM LCDM distances (i.e., locations with respect to the GM/WM surface for which these differences start to occur are determined. The methodology is also applicable to LCDM-based morphometric measures of other cortical structures affected by disease.

Training for Distance Teaching through Distance Learning.

Science.gov (United States)

Cadorath, Jill; Harris, Simon; Encinas, Fatima

2002-01-01

Describes a mixed-mode bachelor degree course in English language teaching at the Universidad Autonoma de Puebla (Mexico) that was designed to help practicing teachers write appropriate distance education materials by giving them the experience of being distance students. Includes a course outline and results of a course evaluation. (Author/LRW)

Near-field excitation exchange between motionless point atoms located near the conductive surface

Science.gov (United States)

Kuraptsev, Aleksei S.; Sokolov, Igor M.

2018-04-01

On the basis of quantum microscopic approach we study the excitation dynamics of two motionless point atoms located near the perfectly conducting mirror. We have analyzed the spontaneous decay rate of individual atoms near the mirror as well as the strength of dipole-dipole interaction between different atoms. It is shown that the spontaneous decay rate of an excited atom significantly depends on the distance from this atom to the mirror. In the case when the interatomic separation is less or comparable with the wavelength of resonant radiation, the spontaneous decay dynamics of an excited atom is described by multi-exponential law. It depends both the interatomic separation and the spatial orientation of diatomic quasimolecule.

Tourists consuming distance

DEFF Research Database (Denmark)

Larsen, Gunvor Riber

The environmental impact of tourism mobility is linked to the distances travelled in order to reach a holiday destination, and with tourists travelling more and further than previously, an understanding of how the tourists view the distance they travel across becomes relevant. Based on interviews...... contribute to an understanding of how it is possible to change tourism travel behaviour towards becoming more sustainable. How tourists 'consume distance' is discussed, from the practical level of actually driving the car or sitting in the air plane, to the symbolic consumption of distance that occurs when...... travelling on holiday becomes part of a lifestyle and a social positioning game. Further, different types of tourist distance consumers are identified, ranging from the reluctant to the deliberate and nonchalant distance consumers, who display very differing attitudes towards the distance they all travel...

Analytic processing of distance.

Science.gov (United States)

Dopkins, Stephen; Galyer, Darin

2018-01-01

How does a human observer extract from the distance between two frontal points the component corresponding to an axis of a rectangular reference frame? To find out we had participants classify pairs of small circles, varying on the horizontal and vertical axes of a computer screen, in terms of the horizontal distance between them. A response signal controlled response time. The error rate depended on the irrelevant vertical as well as the relevant horizontal distance between the test circles with the relevant distance effect being larger than the irrelevant distance effect. The results implied that the horizontal distance between the test circles was imperfectly extracted from the overall distance between them. The results supported an account, derived from the Exemplar Based Random Walk model (Nosofsky & Palmieri, 1997), under which distance classification is based on the overall distance between the test circles, with relevant distance being extracted from overall distance to the extent that the relevant and irrelevant axes are differentially weighted so as to reduce the contribution of irrelevant distance to overall distance. The results did not support an account, derived from the General Recognition Theory (Ashby & Maddox, 1994), under which distance classification is based on the relevant distance between the test circles, with the irrelevant distance effect arising because a test circle's perceived location on the relevant axis depends on its location on the irrelevant axis, and with relevant distance being extracted from overall distance to the extent that this dependency is absent. Copyright © 2017 Elsevier B.V. All rights reserved.

Robust structural identification via polyhedral template matching

DEFF Research Database (Denmark)

Larsen, Peter Mahler; Schmidt, Søren; Schiøtz, Jakob

2016-01-01

Successful scientific applications of large-scale molecular dynamics often rely on automated methods for identifying the local crystalline structure of condensed phases. Many existing methods for structural identification, such as common neighbour analysis, rely on interatomic distances (or thres...... is made available under a Free and Open Source Software license....

Distancing, not embracing, the Distancing-Embracing model of art reception.

Science.gov (United States)

Davies, Stephen

2017-01-01

Despite denials in the target article, the Distancing-Embracing model appeals to compensatory ideas in explaining the appeal of artworks that elicit negative affect. The model also appeals to the deflationary effects of psychological distancing. Having pointed to the famous rejection in the 1960s of the view that aesthetic experience involves psychological distancing, I suggest that "distance" functions here as a weak metaphor that cannot sustain the explanatory burden the theory demands of it.

Foundations of Distance Education. Third Edition. Routledge Studies in Distance Education.

Science.gov (United States)

Keegan, Desmond

This text gives an overview of distance education for students, administrators, and practitioners in distance education. Chapter 1 discusses the study of distance education. Chapter 2 analyzes forms of nonconventional education (open, nontraditional) that may have similarities to distance education but are not to be identified with it. Chapter 3…

modelling distances

Directory of Open Access Journals (Sweden)

Robert F. Love

2001-01-01

Full Text Available Distance predicting functions may be used in a variety of applications for estimating travel distances between points. To evaluate the accuracy of a distance predicting function and to determine its parameters, a goodness-of-fit criteria is employed. AD (Absolute Deviations, SD (Squared Deviations and NAD (Normalized Absolute Deviations are the three criteria that are mostly employed in practice. In the literature some assumptions have been made about the properties of each criterion. In this paper, we present statistical analyses performed to compare the three criteria from different perspectives. For this purpose, we employ the ℓkpθ-norm as the distance predicting function, and statistically compare the three criteria by using normalized absolute prediction error distributions in seventeen geographical regions. We find that there exist no significant differences between the criteria. However, since the criterion SD has desirable properties in terms of distance modelling procedures, we suggest its use in practice.

Computational experience with a parallel algorithm for tetrangle inequality bound smoothing.

Science.gov (United States)

Rajan, K; Deo, N

1999-09-01

Determining molecular structure from interatomic distances is an important and challenging problem. Given a molecule with n atoms, lower and upper bounds on interatomic distances can usually be obtained only for a small subset of the 2(n(n-1)) atom pairs, using NMR. Given the bounds so obtained on the distances between some of the atom pairs, it is often useful to compute tighter bounds on all the 2(n(n-1)) pairwise distances. This process is referred to as bound smoothing. The initial lower and upper bounds for the pairwise distances not measured are usually assumed to be 0 and infinity. One method for bound smoothing is to use the limits imposed by the triangle inequality. The distance bounds so obtained can often be tightened further by applying the tetrangle inequality--the limits imposed on the six pairwise distances among a set of four atoms (instead of three for the triangle inequalities). The tetrangle inequality is expressed by the Cayley-Menger determinants. For every quadruple of atoms, each pass of the tetrangle inequality bound smoothing procedure finds upper and lower limits on each of the six distances in the quadruple. Applying the tetrangle inequalities to each of the (4n) quadruples requires O(n4) time. Here, we propose a parallel algorithm for bound smoothing employing the tetrangle inequality. Each pass of our algorithm requires O(n3 log n) time on a REW PRAM (Concurrent Read Exclusive Write Parallel Random Access Machine) with O(log(n)n) processors. An implementation of this parallel algorithm on the Intel Paragon XP/S and its performance are also discussed.

Interatomic interaction effects on second-order momentum correlations and Hong-Ou-Mandel interference of double-well-trapped ultracold fermionic atoms

Science.gov (United States)

Brandt, Benedikt B.; Yannouleas, Constantine; Landman, Uzi

2018-05-01

Identification and understanding of the evolution of interference patterns in two-particle momentum correlations as a function of the strength of interatomic interactions are important in explorations of the nature of quantum states of trapped particles. Together with the analysis of two-particle spatial correlations, they offer the prospect of uncovering fundamental symmetries and structure of correlated many-body states, as well as opening vistas into potential control and utilization of correlated quantum states as quantum-information resources. With the use of the second-order density matrix constructed via exact diagonalization of the microscopic Hamiltonian, and an analytic Hubbard-type model, we explore here the systematic evolution of characteristic interference patterns in the two-body momentum and spatial correlation maps of two entangled ultracold fermionic atoms in a double well, for the entire attractive- and repulsive-interaction range. We uncover quantum-statistics-governed bunching and antibunching, as well as interaction-dependent interference patterns, in the ground and excited states, and interpret our results in light of the Hong-Ou-Mandel interference physics, widely exploited in photon indistinguishability testing and quantum-information science.

Brownian distance covariance

OpenAIRE

Székely, Gábor J.; Rizzo, Maria L.

2010-01-01

Distance correlation is a new class of multivariate dependence coefficients applicable to random vectors of arbitrary and not necessarily equal dimension. Distance covariance and distance correlation are analogous to product-moment covariance and correlation, but generalize and extend these classical bivariate measures of dependence. Distance correlation characterizes independence: it is zero if and only if the random vectors are independent. The notion of covariance with...

Traversing psychological distance.

Science.gov (United States)

Liberman, Nira; Trope, Yaacov

2014-07-01

Traversing psychological distance involves going beyond direct experience, and includes planning, perspective taking, and contemplating counterfactuals. Consistent with this view, temporal, spatial, and social distances as well as hypotheticality are associated, affect each other, and are inferred from one another. Moreover, traversing all distances involves the use of abstraction, which we define as forming a belief about the substitutability for a specific purpose of subjectively distinct objects. Indeed, across many instances of both abstraction and psychological distancing, more abstract constructs are used for more distal objects. Here, we describe the implications of this relation for prediction, choice, communication, negotiation, and self-control. We ask whether traversing distance is a general mental ability and whether distance should replace expectancy in expected-utility theories. Copyright © 2014 Elsevier Ltd. All rights reserved.

Open and Distance Learning Today. Routledge Studies in Distance Education Series.

Science.gov (United States)

Lockwood, Fred, Ed.

This book contains the following papers on open and distance learning today: "Preface" (Daniel); "Big Bang Theory in Distance Education" (Hawkridge); "Practical Agenda for Theorists of Distance Education" (Perraton); "Trends, Directions and Needs: A View from Developing Countries" (Koul); "American…

Crystal chemical analysis of formation of solid solutions on the basis of compounds with garnet structure

International Nuclear Information System (INIS)

Kuz'micheva, G.M.; Kozlikin, S.N.

1989-01-01

Crystal chemical formulas permitting to evaluate the character of changes in interatomic distances during isomorphous substitution and, hence, the probability of formation of internal solid solutions and successive isomorphous substitution, are presented. The possibility of formation of introduction solid solutions is considered, using as an example Sc, Y oxides, rare earths with garnet structure

Static lattice distortions and the structure of Au/Si(111)-(5x1): An x-ray-diffraction study

DEFF Research Database (Denmark)

Schamper, C.; Moritz, W.; Schulz, H.

1991-01-01

perpendicular to the rows. The substrate atoms in the top double layer are shifted up to 1 angstrom from their bulk position. The structure has a disordered 5 x 2 periodicity due to the variation of the interatomic Au-Au distances within a row in the [011BAR] direction. The model is consistent with recent...

From a distance: implications of spontaneous self-distancing for adaptive self-reflection.

Science.gov (United States)

Ayduk, Ozlem; Kross, Ethan

2010-05-01

Although recent experimental work indicates that self-distancing facilitates adaptive self-reflection, it remains unclear (a) whether spontaneous self-distancing leads to similar adaptive outcomes, (b) how spontaneous self-distancing relates to avoidance, and (c) how this strategy impacts interpersonal behavior. Three studies examined these issues demonstrating that the more participants spontaneously self-distanced while reflecting on negative memories, the less emotional (Studies 1-3) and cardiovascular (Study 2) reactivity they displayed in the short term. Spontaneous self-distancing was also associated with lower emotional reactivity and intrusive ideation over time (Study 1). The negative association between spontaneous self-distancing and emotional reactivity was mediated by how participants construed their experience (i.e., less recounting relative to reconstruing) rather than avoidance (Studies 1-2). In addition, spontaneous self-distancing was associated with more problem-solving behavior and less reciprocation of negativity during conflicts among couples in ongoing relationships (Study 3). Although spontaneous self-distancing was empirically related to trait rumination, it explained unique variance in predicting key outcomes. 2010 APA, all rights reserved

Distance-regular graphs

NARCIS (Netherlands)

van Dam, Edwin R.; Koolen, Jack H.; Tanaka, Hajime

2016-01-01

This is a survey of distance-regular graphs. We present an introduction to distance-regular graphs for the reader who is unfamiliar with the subject, and then give an overview of some developments in the area of distance-regular graphs since the monograph 'BCN'[Brouwer, A.E., Cohen, A.M., Neumaier,

Hierarchical traits distances explain grassland Fabaceae species' ecological niches distances

Science.gov (United States)

Fort, Florian; Jouany, Claire; Cruz, Pablo

2015-01-01

Fabaceae species play a key role in ecosystem functioning through their capacity to fix atmospheric nitrogen via their symbiosis with Rhizobium bacteria. To increase benefits of using Fabaceae in agricultural systems, it is necessary to find ways to evaluate species or genotypes having potential adaptations to sub-optimal growth conditions. We evaluated the relevance of phylogenetic distance, absolute trait distance and hierarchical trait distance for comparing the adaptation of 13 grassland Fabaceae species to different habitats, i.e., ecological niches. We measured a wide range of functional traits (root traits, leaf traits, and whole plant traits) in these species. Species phylogenetic and ecological distances were assessed from a species-level phylogenetic tree and species' ecological indicator values, respectively. We demonstrated that differences in ecological niches between grassland Fabaceae species were related more to their hierarchical trait distances than to their phylogenetic distances. We showed that grassland Fabaceae functional traits tend to converge among species with the same ecological requirements. Species with acquisitive root strategies (thin roots, shallow root systems) are competitive species adapted to non-stressful meadows, while conservative ones (coarse roots, deep root systems) are able to tolerate stressful continental climates. In contrast, acquisitive species appeared to be able to tolerate low soil-P availability, while conservative ones need high P availability. Finally we highlight that traits converge along the ecological gradient, providing the assumption that species with similar root-trait values are better able to coexist, regardless of their phylogenetic distance. PMID:25741353

Hierarchical traits distances explain grassland Fabaceae species’ ecological niches distances

Directory of Open Access Journals (Sweden)

Florian eFort

2015-02-01

Full Text Available Fabaceae species play a key role in ecosystem functioning through their capacity to fix atmospheric nitrogen via their symbiosis with Rhizobium bacteria. To increase benefits of using Fabaceae in agricultural systems, it is necessary to find ways to evaluate species or genotypes having potential adaptations to sub-optimal growth conditions. We evaluated the relevance of phylogenetic distance, absolute trait distance and hierarchical trait distance for comparing the adaptation of 13 grassland Fabaceae species to different habitats, i.e. ecological niches. We measured a wide range of functional traits (root traits, leaf traits and whole plant traits in these species. Species phylogenetic and ecological distances were assessed from a species-level phylogenetic tree and species’ ecological indicator values, respectively. We demonstrated that differences in ecological niches between grassland Fabaceae species were related more to their hierarchical trait distances than to their phylogenetic distances. We showed that grassland Fabaceae functional traits tend to converge among species with the same ecological requirements. Species with acquisitive root strategies (thin roots, shallow root systems are competitive species adapted to non-stressful meadows, while conservative ones (coarse roots, deep root systems are able to tolerate stressful continental climates. In contrast, acquisitive species appeared to be able to tolerate low soil-P availability, while conservative ones need high P availability. Finally we highlight that traits converge along the ecological gradient, providing the assumption that species with similar root-trait values are better able to coexist, regardless of their phylogenetic distance.

Numerical distance protection

CERN Document Server

Ziegler, Gerhard

2011-01-01

Distance protection provides the basis for network protection in transmission systems and meshed distribution systems. This book covers the fundamentals of distance protection and the special features of numerical technology. The emphasis is placed on the application of numerical distance relays in distribution and transmission systems.This book is aimed at students and engineers who wish to familiarise themselves with the subject of power system protection, as well as the experienced user, entering the area of numerical distance protection. Furthermore it serves as a reference guide for s

The Distance Standard Deviation

OpenAIRE

Edelmann, Dominic; Richards, Donald; Vogel, Daniel

2017-01-01

The distance standard deviation, which arises in distance correlation analysis of multivariate data, is studied as a measure of spread. New representations for the distance standard deviation are obtained in terms of Gini's mean difference and in terms of the moments of spacings of order statistics. Inequalities for the distance variance are derived, proving that the distance standard deviation is bounded above by the classical standard deviation and by Gini's mean difference. Further, it is ...

Distance Education in Turkey

Directory of Open Access Journals (Sweden)

Dr. Nursel Selver RUZGAR,

2004-04-01

Full Text Available Distance Education in Turkey Assistant Professor Dr. Nursel Selver RUZGAR Technical Education Faculty Marmara University, TURKEY ABSTRACT Many countries of the world are using distance education with various ways, by internet, by post and by TV. In this work, development of distance education in Turkey has been presented from the beginning. After discussing types and applications for different levels of distance education in Turkey, the distance education was given in the cultural aspect of the view. Then, in order to create the tendencies and thoughts of graduates of Higher Education Institutions and Distance Education Institutions about being competitors in job markets, sufficiency of education level, advantages for education system, continuing education in different Institutions, a face-to-face survey was applied to 1284 graduates, 958 from Higher Education Institutions and 326 from Distance Education Institutions. The results were evaluated and discussed. In the last part of this work, suggestions to become widespread and improve the distance education in the country were made.

Analytical theory of noncollinear amorphous metallic magnetism

International Nuclear Information System (INIS)

Kakehashi, Y.; Uchida, T.

2001-01-01

Analytical theory of noncollinear magnetism in amorphous metals is proposed on the basis of the Gaussian model for the distribution of the interatomic distance and the saddle-point approximation. The theory removes the numerical difficulty in the previous theory based on the Monte-Carlo sampling method, and reasonably describes the magnetic properties of amorphous transition metals

Haptic Discrimination of Distance

Science.gov (United States)

van Beek, Femke E.; Bergmann Tiest, Wouter M.; Kappers, Astrid M. L.

2014-01-01

While quite some research has focussed on the accuracy of haptic perception of distance, information on the precision of haptic perception of distance is still scarce, particularly regarding distances perceived by making arm movements. In this study, eight conditions were measured to answer four main questions, which are: what is the influence of reference distance, movement axis, perceptual mode (active or passive) and stimulus type on the precision of this kind of distance perception? A discrimination experiment was performed with twelve participants. The participants were presented with two distances, using either a haptic device or a real stimulus. Participants compared the distances by moving their hand from a start to an end position. They were then asked to judge which of the distances was the longer, from which the discrimination threshold was determined for each participant and condition. The precision was influenced by reference distance. No effect of movement axis was found. The precision was higher for active than for passive movements and it was a bit lower for real stimuli than for rendered stimuli, but it was not affected by adding cutaneous information. Overall, the Weber fraction for the active perception of a distance of 25 or 35 cm was about 11% for all cardinal axes. The recorded position data suggest that participants, in order to be able to judge which distance was the longer, tried to produce similar speed profiles in both movements. This knowledge could be useful in the design of haptic devices. PMID:25116638

Haptic discrimination of distance.

Directory of Open Access Journals (Sweden)

Femke E van Beek

Full Text Available While quite some research has focussed on the accuracy of haptic perception of distance, information on the precision of haptic perception of distance is still scarce, particularly regarding distances perceived by making arm movements. In this study, eight conditions were measured to answer four main questions, which are: what is the influence of reference distance, movement axis, perceptual mode (active or passive and stimulus type on the precision of this kind of distance perception? A discrimination experiment was performed with twelve participants. The participants were presented with two distances, using either a haptic device or a real stimulus. Participants compared the distances by moving their hand from a start to an end position. They were then asked to judge which of the distances was the longer, from which the discrimination threshold was determined for each participant and condition. The precision was influenced by reference distance. No effect of movement axis was found. The precision was higher for active than for passive movements and it was a bit lower for real stimuli than for rendered stimuli, but it was not affected by adding cutaneous information. Overall, the Weber fraction for the active perception of a distance of 25 or 35 cm was about 11% for all cardinal axes. The recorded position data suggest that participants, in order to be able to judge which distance was the longer, tried to produce similar speed profiles in both movements. This knowledge could be useful in the design of haptic devices.

Distancing from experienced self: how global-versus-local perception affects estimation of psychological distance.

Science.gov (United States)

Liberman, Nira; Förster, Jens

2009-08-01

In 4 studies, the authors examined the prediction derived from construal level theory (CLT) that higher level of perceptual construal would enhance estimated egocentric psychological distance. The authors primed participants with global perception, local perception, or both (the control condition). Relative to the control condition, global processing made participants estimate larger psychological distances in time (Study 1), space (Study 2), social distance (Study 3), and hypotheticality (Study 4). Local processing had the opposite effect. Consistent with CLT, all studies show that the effect of global-versus-local processing did emerge when participants estimated egocentric distances, which are distances from the experienced self in the here and now, but did not emerge with temporal distances not from now (Study 1), spatial distances not from here (Study 2), social distances not from the self (Study 3), or hypothetical events that did not involve altering an experienced reality (Study 4).

Hydrogen effect on embrittlement of iron and steel

International Nuclear Information System (INIS)

Shved, M.M.

1981-01-01

Some existing hypothesis brittleness of metals are considered. The following explanation of reversible hydrogen brittleness is suggested: hydrogen presence in iron and steel brings about the increase in the critical shear stress and the yield stress at all stages of plastic deformation (hydrogen, blocking dislocations hinders plastic shears) and the decrease of rupture strength. Decreasing forces of interatomic interaction of the surface layer some scores interatomic distances thick, hydrogen decreases the resistance of normal stresses to its effect. Thus, whatever mechanism brings about the formation of the first cracks in the metal in the presence of absorbed hydrogen, they appear at lower outside applied stresses. In the framework of the model suggested one can explain experimentally observed changes of mechanical properties of iron and steel under hydrogen effect

Effect of temperature on atom-atom collision chain length in metals

International Nuclear Information System (INIS)

Makarov, A.A.; Demkin, N.A.; Lyashchenko, B.G.

1981-01-01

Focused atom-atom collision chain lengths are calculated for fcc-crystals with account of thermal oscillations. The model of solid spheres with the Born-Merier potential has been used in the calculations. The dependence of chain lengths on the temperature, energy and movement direction of the first chain atom for Cu, Au, Ag, Pb, Ni is considered. The plot presented shows that the chain lengths strongly decrease with temperature growth, for example, for the gold at T=100 K the chain length equals up to 37 interatomic spacings, whereas at T=1000 K their length decreases down to 5 interatomic distances. The dependence of the energy loss by the chain atoms on the atom number in the chain is obtained in a wide range of crystal temperature and the primary chain atom energy [ru

Fast Computing for Distance Covariance

OpenAIRE

Huo, Xiaoming; Szekely, Gabor J.

2014-01-01

Distance covariance and distance correlation have been widely adopted in measuring dependence of a pair of random variables or random vectors. If the computation of distance covariance and distance correlation is implemented directly accordingly to its definition then its computational complexity is O($n^2$) which is a disadvantage compared to other faster methods. In this paper we show that the computation of distance covariance and distance correlation of real valued random variables can be...

ORDERED WEIGHTED DISTANCE MEASURE

Institute of Scientific and Technical Information of China (English)

Zeshui XU; Jian CHEN

2008-01-01

The aim of this paper is to develop an ordered weighted distance (OWD) measure, which is thegeneralization of some widely used distance measures, including the normalized Hamming distance, the normalized Euclidean distance, the normalized geometric distance, the max distance, the median distance and the min distance, etc. Moreover, the ordered weighted averaging operator, the generalized ordered weighted aggregation operator, the ordered weighted geometric operator, the averaging operator, the geometric mean operator, the ordered weighted square root operator, the square root operator, the max operator, the median operator and the min operator axe also the special cases of the OWD measure. Some methods depending on the input arguments are given to determine the weights associated with the OWD measure. The prominent characteristic of the OWD measure is that it can relieve (or intensify) the influence of unduly large or unduly small deviations on the aggregation results by assigning them low (or high) weights. This desirable characteristic makes the OWD measure very suitable to be used in many actual fields, including group decision making, medical diagnosis, data mining, and pattern recognition, etc. Finally, based on the OWD measure, we develop a group decision making approach, and illustrate it with a numerical example.

Self-interstitial configuration in molybdenum studied by modified ...

Indian Academy of Sciences (India)

The negative values refer a motion along negative direction of axis. It is noted that the displacements of NN atoms to a SIA are very large compared to those to a vacancy in ref. [1]. This is because adding a SIA into normal matrix will result in a large decrease in interatomic distance and thus a large increase in the acting ...

Investigations of Reactive Processes at Temperatures Relevant to the Hypersonic Flight Regime

Science.gov (United States)

2014-10-31

x = (r12, r13, r23) are the three interatomic distances of the NO2 molecule (Figure 1), and V1(x), V2 (x) and V3(x) are the potential energies for the...and ID Boyd, J. Spacecraft Rockets 45(6), 1196– 1206 (2008). [5] S. Mishra and M. Meuwly. Kinetics and Dynamics: from Nano- to Bio-Scale, Challenges

Determination of the interatomic potential from elastic differential cross sections at fixed energy: Functional sensitivity analysis approach

International Nuclear Information System (INIS)

Ho, T.; Rabitz, H.

1989-01-01

Elastic differential cross sections in atomic crossed beam experiments contain detailed information about the underlying interatomic potentials. The functional sensitivity density of the cross sections with respect to the potential δσ(θ)/δV(R) reveals such information and has been implemented in an iterative inversion procedure, analogous to that of the Newton--Raphson technique. The stability of the inversion is achieved with the use of the regularization method of Tikhonov and Miller. It is shown that given a set of well resolved and noise-free differential cross section data within a limited angular range and given a reasonable starting reference potential, the recovered potential accurately resembles the desired one in the important region, i.e., the region to which the scattering data are sensitive. The region of importance depends upon the collision energy relative to the well depth of the potential under study; usually a higher collision energy penetrates deeper into the repulsive part of the potential and thus accordingly yields a more accurate potential in that part. The inversion procedure produces also a quality function indicating the well determined radial region. Moreover, the extracted potential is quite independent of the functional form of the reference potential in contrast to curve fitting approaches. As illustrations, the model inert gas systems He--Ne and Ne--Ar have been considered. For collision energies within an order of magnitude of the associated potential well depth, the attractive part of the potential can be determined to high precision provided that scattering data at small enough angles are available

THE DISTANCE TO M51

Energy Technology Data Exchange (ETDEWEB)

McQuinn, Kristen B. W. [University of Texas at Austin, McDonald Observatory, 2515 Speedway, Stop C1400 Austin, TX 78712 (United States); Skillman, Evan D. [Minnesota Institute for Astrophysics, School of Physics and Astronomy, 116 Church Street, S.E., University of Minnesota, Minneapolis, MN 55455 (United States); Dolphin, Andrew E. [Raytheon Company, 1151 E. Hermans Road, Tucson, AZ 85756 (United States); Berg, Danielle [Center for Gravitation, Cosmology and Astrophysics, Department of Physics, University of Wisconsin Milwaukee, 1900 East Kenwood Boulevard, Milwaukee, WI 53211 (United States); Kennicutt, Robert, E-mail: kmcquinn@astro.as.utexas.edu [Institute for Astronomy, University of Cambridge, Madingley Road, Cambridge CB3 0HA (United Kingdom)

2016-07-20

Great investments of observing time have been dedicated to the study of nearby spiral galaxies with diverse goals ranging from understanding the star formation process to characterizing their dark matter distributions. Accurate distances are fundamental to interpreting observations of these galaxies, yet many of the best studied nearby galaxies have distances based on methods with relatively large uncertainties. We have started a program to derive accurate distances to these galaxies. Here we measure the distance to M51—the Whirlpool galaxy—from newly obtained Hubble Space Telescope optical imaging using the tip of the red giant branch method. We measure the distance modulus to be 8.58 ± 0.10 Mpc (statistical), corresponding to a distance modulus of 29.67 ± 0.02 mag. Our distance is an improvement over previous results as we use a well-calibrated, stable distance indicator, precision photometry in a optimally selected field of view, and a Bayesian Maximum Likelihood technique that reduces measurement uncertainties.

Encyclopedia of distances

CERN Document Server

Deza, Michel Marie

2009-01-01

Distance metrics and distances have become an essential tool in many areas of pure and applied Mathematics. This title offers both independent introductions and definitions, while at the same time making cross-referencing easy through hyperlink-like boldfaced references to original definitions.

EXAFS as a tool for catalyst characterization: a review of the data analysis methods

Directory of Open Access Journals (Sweden)

NORONHA F. B.

1999-01-01

Full Text Available A review of the EXAFS data analysis methods is presented. A detailed description of the EXAFS signal extraction and the Fourier transform of the data are discussed. The procedure for determining interatomic distances, coordination numbers and disorder effects from EXAFS data is described. This paper also discusses the data analysis statistics. Finally, one example of catalyst characterization by the EXAFS technique is reported.

Crystal structure of strontium osmate (8) Sr[OsO5(H2O)]x3H2O

International Nuclear Information System (INIS)

Nevskij, N.N; Ivanov-Ehmin, B.N.; Nevskaya, N.A.; Belov, N.V.; AN SSSR, Moscow. Inst. Kristallografii)

1982-01-01

Crystal structure of the Sr[OsO 5 (H 2 O)]x3H 2 O complex is studied. Rhombic P-cell has the parameters: a=6.426(1), b=7.888(1), c=14.377(5) A, Vsub(c)=729 A 3 . The R-factor equals 0.034. The coordinates of the basis atoms and isotropic temperature corrections, as well as basic interatomic distances, are determined

Learner characteristics involved in distance learning

Energy Technology Data Exchange (ETDEWEB)

Cernicek, A.T.; Hahn, H.A.

1991-01-01

Distance learning represents a strategy for leveraging resources to solve educational and training needs. Although many distance learning programs have been developed, lessons learned regarding differences between distance learning and traditional education with respect to learner characteristics have not been well documented. Therefore, we conducted a survey of 20 distance learning professionals. The questionnaire was distributed to experts attending the second Distance Learning Conference sponsored by Los Alamos National Laboratory. This survey not only acquired demographic information from each of the respondents but also identified important distance learning student characteristics. Significant distance learner characteristics, which were revealed statistically and which influence the effectiveness of distance learning, include the following: reading level, student autonomy, and self-motivation. Distance learning cannot become a more useful and effective method of instruction without identifying and recognizing learner characteristics. It will be important to consider these characteristics when designing all distance learning courses. This paper will report specific survey findings and their implications for developing distance learning courses. 9 refs., 6 tabs.

Distance Magic-Type and Distance Antimagic-Type Labelings of Graphs

Science.gov (United States)

Freyberg, Bryan J.

Generally speaking, a distance magic-type labeling of a graph G of order n is a bijection l from the vertex set of the graph to the first n natural numbers or to the elements of a group of order n, with the property that the weight of each vertex is the same. The weight of a vertex x is defined as the sum (or appropriate group operation) of all the labels of vertices adjacent to x. If instead we require that all weights differ, then we refer to the labeling as a distance antimagic-type labeling. This idea can be generalized for directed graphs; the weight will take into consideration the direction of the arcs. In this manuscript, we provide new results for d-handicap labeling, a distance antimagic-type labeling, and introduce a new distance magic-type labeling called orientable Gamma-distance magic labeling. A d-handicap distance antimagic labeling (or just d-handicap labeling for short) of a graph G = ( V,E) of order n is a bijection l from V to the set {1,2,...,n} with induced weight function [special characters omitted]. such that l(xi) = i and the sequence of weights w(x 1),w(x2),...,w (xn) forms an arithmetic sequence with constant difference d at least 1. If a graph G admits a d-handicap labeling, we say G is a d-handicap graph. A d-handicap incomplete tournament, H(n,k,d ) is an incomplete tournament of n teams ranked with the first n natural numbers such that each team plays exactly k games and the strength of schedule of the ith ranked team is d more than the i + 1st ranked team. That is, strength of schedule increases arithmetically with strength of team. Constructing an H(n,k,d) is equivalent to finding a d-handicap labeling of a k-regular graph of order n.. In Chapter 2 we provide general constructions for every d for large classes of both n and k, providing breadfth and depth to the catalog of known H(n,k,d)'s. In Chapters 3 - 6, we introduce a new type of labeling called orientable Gamma-distance magic labeling. Let Gamma be an abelian group of order

Systematic study of photoluminescence upon band gap excitation in perovskite-type titanates R 1/2Na1/2TiO3:Pr (R=La, Gd, Lu, and Y)

International Nuclear Information System (INIS)

Inaguma, Yoshiyuki; Tsuchiya, Takeshi; Katsumata, Tetsuhiro

2007-01-01

Pr 3+ -doped perovskites R 1/2 Na 1/2 TiO 3 :Pr (R=La, Gd, Lu, and Y) were synthesized, and their structures, optical absorption and luminescent properties were investigated, and the relationship between structures and optical properties are discussed. Optical band gap of R 1/2 Na 1/2 TiO 3 increases in the order R=La, Gd, Y, and Lu, which is primarily due to a decrease in band width accompanied by a decrease in Ti-O-Ti bond angle. Intense red emission assigned to f-f transition of Pr 3+ from the excited 1 D 2 level to the ground 3 H 4 state upon the band gap photo-excitation (UV) was observed for all compounds. The wavelength of emission peaks was red-shifted in the order R=La, Gd, Y, and Lu, which originates from the increase in crystal field splitting of Pr 3+ . This is attributed to the decrease in inter-atomic distances of Pr-O together with the inter-atomic distances (R, Na)-O, i.e., increase in covalency between Pr and O. The results indicate that the luminescent properties in R 1/2 Na 1/2 TiO 3 :Pr are governed by the relative energy level between the ground and excited state of 4f 2 for Pr 3+ , and the conduction and valence band, which is primarily dependent on the structure, e.g., the tilt of TiO 6 octahedra and the Pr-Ti inter-atomic distance and the site symmetry of Pr ion. - Graphical abstract: The red intense emission assigned to f-f transition of Pr 3+ from the excited 1 D 2 level to the ground 3 H 4 state upon the band gap photo-excitation (UV) was observed upon the band gap photo-excitation in perovskites R 1/2 Na 1/2 TiO 3 :Pr(R=La, Gd, Lu, and Y). It was found that the systematic changes in their luminescent properties are strongly dependent on the structure

Distance-transitive graphs

NARCIS (Netherlands)

Cohen, A.M.; Beineke, L.W.; Wilson, R.J.; Cameron, P.J.

2004-01-01

In this chapter we investigate the classification of distance-transitive graphs: these are graphs whose automorphism groups are transitive on each of the sets of pairs of vertices at distance i, for i = 0, 1,.... We provide an introduction into the field. By use of the classification of finite

Making Distance Visible: Assembling Nearness in an Online Distance Learning Programme

Science.gov (United States)

Ross, Jen; Gallagher, Michael Sean; Macleod, Hamish

2013-01-01

Online distance learners are in a particularly complex relationship with the educational institutions they belong to (Bayne, Gallagher, & Lamb, 2012). For part-time distance students, arrivals and departures can be multiple and invisible as students take courses, take breaks, move into independent study phases of a programme, find work or…

The Relation between the Electric Conductance of Nanostructure Bridge and Friedel Sum Rule

International Nuclear Information System (INIS)

Kotani, Y; Shima, N; Makoshi, K

2012-01-01

We analyze the electric conductance through nanostructure bridges in terms of phase-shifts, which satisfy the Friedel sum rule. The phase-shifts are given by solving the eigenvalue equation obtained by extending the method applied to a single impurity problem in a metal. The local charge neutrality condition is introduced through the Friedel sum rule. It is analytically shown that the electric conductance can increase as the two electrodes separate with the condition in which the phase-shifts satisfy the Friedel sum rule. The increment of the distance between two electrodes is obtained by gradually separating interatomic distance.

Steiner Distance in Graphs--A Survey

OpenAIRE

Mao, Yaping

2017-01-01

For a connected graph $G$ of order at least $2$ and $S\\subseteq V(G)$, the \\emph{Steiner distance} $d_G(S)$ among the vertices of $S$ is the minimum size among all connected subgraphs whose vertex sets contain $S$. In this paper, we summarize the known results on the Steiner distance parameters, including Steiner distance, Steiner diameter, Steiner center, Steiner median, Steiner interval, Steiner distance hereditary graph, Steiner distance stable graph, average Steiner distance, and Steiner ...

Theoretical Principles of Distance Education.

Science.gov (United States)

Keegan, Desmond, Ed.

This book contains the following papers examining the didactic, academic, analytic, philosophical, and technological underpinnings of distance education: "Introduction"; "Quality and Access in Distance Education: Theoretical Considerations" (D. Randy Garrison); "Theory of Transactional Distance" (Michael G. Moore);…

THE DISTANCE TO M104

Energy Technology Data Exchange (ETDEWEB)

McQuinn, Kristen B. W. [University of Texas at Austin, McDonald Observatory, 2515 Speedway, Stop C1400 Austin, TX 78712 (United States); Skillman, Evan D. [Minnesota Institute for Astrophysics, School of Physics and Astronomy, 116 Church Street, SE, University of Minnesota, Minneapolis, MN 55455 (United States); Dolphin, Andrew E. [Raytheon Company, 1151 E. Hermans Road, Tucson, AZ 85756 (United States); Berg, Danielle [Center for Gravitation, Cosmology and Astrophysics, Department of Physics, University of Wisconsin Milwaukee, 1900 East Kenwood Boulevard, Milwaukee, WI 53211 (United States); Kennicutt, Robert, E-mail: kmcquinn@astro.as.utexas.edu [Institute for Astronomy, University of Cambridge, Madingley Road, Cambridge CB3 0HA (United Kingdom)

2016-11-01

M104 (NGC 4594; the Sombrero galaxy) is a nearby, well-studied elliptical galaxy included in scores of surveys focused on understanding the details of galaxy evolution. Despite the importance of observations of M104, a consensus distance has not yet been established. Here, we use newly obtained Hubble Space Telescope optical imaging to measure the distance to M104 based on the tip of the red giant branch (TRGB) method. Our measurement yields the distance to M104 to be 9.55 ± 0.13 ± 0.31 Mpc equivalent to a distance modulus of 29.90 ± 0.03 ± 0.07 mag. Our distance is an improvement over previous results as we use a well-calibrated, stable distance indicator, precision photometry in a optimally selected field of view, and a Bayesian maximum likelihood technique that reduces measurement uncertainties. The most discrepant previous results are due to Tully–Fisher method distances, which are likely inappropriate for M104 given its peculiar morphology and structure. Our results are part of a larger program to measure accurate distances to a sample of well-known spiral galaxies (including M51, M74, and M63) using the TRGB method.

The Distance to M51

Science.gov (United States)

McQuinn, Kristen. B. W.; Skillman, Evan D.; Dolphin, Andrew E.; Berg, Danielle; Kennicutt, Robert

2016-07-01

Great investments of observing time have been dedicated to the study of nearby spiral galaxies with diverse goals ranging from understanding the star formation process to characterizing their dark matter distributions. Accurate distances are fundamental to interpreting observations of these galaxies, yet many of the best studied nearby galaxies have distances based on methods with relatively large uncertainties. We have started a program to derive accurate distances to these galaxies. Here we measure the distance to M51—the Whirlpool galaxy—from newly obtained Hubble Space Telescope optical imaging using the tip of the red giant branch method. We measure the distance modulus to be 8.58 ± 0.10 Mpc (statistical), corresponding to a distance modulus of 29.67 ± 0.02 mag. Our distance is an improvement over previous results as we use a well-calibrated, stable distance indicator, precision photometry in a optimally selected field of view, and a Bayesian Maximum Likelihood technique that reduces measurement uncertainties. Based on observations made with the NASA/ESA Hubble Space Telescope, obtained from the Data Archive at the Space Telescope Science Institute, which is operated by the Association of Universities for Research in Astronomy, Inc., under NASA contract NAS 5-26555.

Are contemporary tourists consuming distance?

DEFF Research Database (Denmark)

Larsen, Gunvor Riber

2012. Background The background for this research, which explores how tourists represent distance and whether or not distance can be said to be consumed by contemporary tourists, is the increasing leisure mobility of people. Travelling for the purpose of visiting friends and relatives is increasing...... of understanding mobility at a conceptual level, and distance matters to people's manifest mobility: how they travel and how far they travel are central elements of their movements. Therefore leisure mobility (indeed all mobility) is the activity of relating across distance, either through actual corporeal...... metric representation. These representations are the focus for this research. Research Aim and Questions The aim of this research is thus to explore how distance is being represented within the context of leisure mobility. Further the aim is to explore how or whether distance is being consumed...

Terminology report respect distance. The Use of the term respect distance in Posiva and SKB

International Nuclear Information System (INIS)

Lampinen, H.

2007-09-01

The term respect distance is used in some key publications of the Finnish Nuclear Waste Management Company, Posiva, and the Swedish Nuclear Waste Management Company, SKB (Svensk Kaernbrenslehantering). Posiva and SKB researchers use the same terms in their reports, and it is acknowledged that the terms used by both companies are not used in the same way, though the differences are often subtle. This report is a literature study of the term 'respect distance' and the terms immediately associated to it. Vital terms related to the respect distance and issues concerning the use of scale concepts in Posiva and SKB are gathered in the end of report. Posiva's respect distances consider the seismic, hydrological and mechanical properties of the deterministic deformation zones as important issues that constitute a risk for longterm safety. These requirements for respect distances are an interpretation of STUK's YVL 8.4 Guide. At present, Posiva's criteria regarding respect distances follow the instructions given in the Host Rock Classification system (HRC), whereas the size of a deformation zone to which respect distances are applied vary from the regional to local major and minor. This and other criteria that are given for respect distances may, however, change in the near future as Posiva's Rock Suitability Criteria (RSC) programme proceeds. SKB's considerations of respect distances acknowledge that the hydraulic and mechanical aspects of a deformation zone have an effect on the respect distance. However, the seismic risk is considered to overshadow the other effects on a regional scale. The respect distance defined for a deformation zone is coupled with the size of a fracture where secondary slip could occur. In the safety assessment it is assumed that this fracture cuts a deposition hole location. In SKB the respect distance is determined for regional and local major deformation zones. The trace length of such a zone is defined as being ≥ 3 km. For deformation zones

New Maximal Two-distance Sets

DEFF Research Database (Denmark)

Lisonek, Petr

1996-01-01

A two-distance set in E^d is a point set X inthe d-dimensional Euclidean spacesuch that the distances between distinct points in Xassume only two different non-zero values. Based on results from classical distance geometry, we developan algorithm to classify, for a given dimension, all maximal...... (largest possible)two-distance sets in E^d.Using this algorithm we have completed the full classificationfor all dimensions less than or equal to 7, andwe have found one set in E^8 whosemaximality follows from Blokhuis' upper bound on sizes of s-distance sets.While in the dimensions less than or equal to 6...

Distance learning

Directory of Open Access Journals (Sweden)

Katarina Pucelj

2006-12-01

Full Text Available I would like to underline the role and importance of knowledge, which is acquired by individuals as a result of a learning process and experience. I have established that a form of learning, such as distance learning definitely contributes to a higher learning quality and leads to innovative, dynamic and knowledgebased society. Knowledge and skills enable individuals to cope with and manage changes, solve problems and also create new knowledge. Traditional learning practices face new circumstances, new and modern technologies appear, which enable quick and quality-oriented knowledge implementation. The centre of learning process at distance learning is to increase the quality of life of citizens, their competitiveness on the workforce market and ensure higher economic growth. Intellectual capital is the one, which represents the biggest capital of each society and knowledge is the key factor for succes of everybody, who are fully aware of this. Flexibility, openness and willingness of people to follow new IT solutions form suitable environment for developing and deciding to take up distance learning.

Fast Exact Euclidean Distance (FEED): A new class of adaptable distance transforms

NARCIS (Netherlands)

Schouten, Theo E.; van den Broek, Egon

2014-01-01

A new unique class of foldable distance transforms of digital images (DT) is introduced, baptized: Fast Exact Euclidean Distance (FEED) transforms. FEED class algorithms calculate the DT starting directly from the definition or rather its inverse. The principle of FEED class algorithms is

Fast Exact Euclidean Distance (FEED) : A new class of adaptable distance transforms

NARCIS (Netherlands)

Schouten, Theo E.; van den Broek, Egon L.

2014-01-01

A new unique class of foldable distance transforms of digital images (DT) is introduced, baptized: Fast Exact Euclidean Distance (FEED) transforms. FEED class algorithms calculate the DT startingdirectly from the definition or rather its inverse. The principle of FEED class algorithms is introduced,

Distance covariance for stochastic processes

DEFF Research Database (Denmark)

Matsui, Muneya; Mikosch, Thomas Valentin; Samorodnitsky, Gennady

2017-01-01

The distance covariance of two random vectors is a measure of their dependence. The empirical distance covariance and correlation can be used as statistical tools for testing whether two random vectors are independent. We propose an analog of the distance covariance for two stochastic processes...

Managing Time, Workload and Costs in Distance Education: Findings from a Literature Review of "Distances et Médiations des Savoirs" (Formerly "Distances et Savoirs")

Science.gov (United States)

Moeglin, Pierre; Vidal, Martine

2015-01-01

The purpose of this review, spanning over 12 years of publication of "Distances et Médiations des Savoirs" ("DMS"), formerly "Distance et Savoirs" ("DMS") (2003-2014), is guided by the question why and how French-speaking researchers addressed the issues of time, workload and costs in distance learning, and…

Critical Points in Distance Learning System

Directory of Open Access Journals (Sweden)

Airina Savickaitė

2013-08-01

Full Text Available Purpose – This article presents the results of distance learning system analysis, i.e. the critical elements of the distance learning system. The critical points of distance learning are a part of distance education online environment interactivity/community process model. The most important is the fact that the critical point is associated with distance learning participants. Design/methodology/approach – Comparative review of articles and analysis of distance learning module. Findings – A modern man is a lifelong learner and distance learning is a way to be a modern person. The focus on a learner and feedback is the most important thing of learning distance system. Also, attention should be paid to the lecture-appropriate knowledge and ability to convey information. Distance system adaptation is the way to improve the learner’s learning outcomes. Research limitations/implications – Different learning disciplines and learning methods may have different critical points. Practical implications – The information of analysis could be important for both lecturers and students, who studies distance education systems. There are familiar critical points which may deteriorate the quality of learning. Originality/value – The study sought to develop remote systems for applications in order to improve the quality of knowledge. Keywords: distance learning, process model, critical points. Research type: review of literature and general overview.

Connecting long distance: semantic distance in analogical reasoning modulates frontopolar cortex activity.

Science.gov (United States)

Green, Adam E; Kraemer, David J M; Fugelsang, Jonathan A; Gray, Jeremy R; Dunbar, Kevin N

2010-01-01

Solving problems often requires seeing new connections between concepts or events that seemed unrelated at first. Innovative solutions of this kind depend on analogical reasoning, a relational reasoning process that involves mapping similarities between concepts. Brain-based evidence has implicated the frontal pole of the brain as important for analogical mapping. Separately, cognitive research has identified semantic distance as a key characteristic of the kind of analogical mapping that can support innovation (i.e., identifying similarities across greater semantic distance reveals connections that support more innovative solutions and models). However, the neural substrates of semantically distant analogical mapping are not well understood. Here, we used functional magnetic resonance imaging (fMRI) to measure brain activity during an analogical reasoning task, in which we parametrically varied the semantic distance between the items in the analogies. Semantic distance was derived quantitatively from latent semantic analysis. Across 23 participants, activity in an a priori region of interest (ROI) in left frontopolar cortex covaried parametrically with increasing semantic distance, even after removing effects of task difficulty. This ROI was centered on a functional peak that we previously associated with analogical mapping. To our knowledge, these data represent a first empirical characterization of how the brain mediates semantically distant analogical mapping.

Equivalence of massive propagator distance and mathematical distance on graphs

International Nuclear Information System (INIS)

Filk, T.

1992-01-01

It is shown in this paper that the assignment of distance according to the massive propagator method and according to the mathematical definition (length of minimal path) on arbitrary graphs with a bound on the degree leads to equivalent large scale properties of the graph. Especially, the internal scaling dimension is the same for both definitions. This result holds for any fixed, non-vanishing mass, so that a really inequivalent definition of distance requires the limit m → 0

Revisiting the localization of Zn2+ cations sorbed on pathological apatite calcifications made through X-ray absorption spectroscopy

Energy Technology Data Exchange (ETDEWEB)

Bazin, D.; Carpentier, X.; Brocheriou, I.; Dorfmuller, P.; Aubert, S.; Chappard, C.; Thiaudiere, D.; Reguer, S.; Waychunas, G.; Jungers, P.; Daudon, M.

2009-04-01

The role of oligo-elements such as Zn in the genesis of pathological calcifications is widely debated in the literature. An essential element of discussion is given by their localization either at the surface or within the Ca apatite crystalline network. To determine the localization, X-ray absorption experiments have been performed at SOLEIL. The Exafs results suggest that Zn atoms, present in the Zn{sup 2+} form, are bound to about 4 O atoms at a distance of 2.00{angstrom}, while the interatomic distance R{sub CaO} ranges between 2.35 {angstrom} and 2.71 {angstrom}. Taking into account the content of Zn (around 1000 ppm) and the difference in ionic radius between Zn{sup 2+} (0.074 nm) and Ca{sup 2+} (0.099 nm), a significant longer interatomic distance would be expected in the case of Zn replacing Ca within the apatite crystalline network. We thus conclude that Zn atoms are localized at the surface and not in the apatite nanocrystal structure. Such structural result has essential biological implications for at least two reasons. Some oligoelements have a marked effect on the transformation of chemical phases, and may modify the morphology of crystals. These are both major issues because, in the case of kidney stones, the medical treatment depends strongly on the precise chemical phase and on the morphology of the biological entities at both macroscopic and mesoscopic scales.

Language distance and tree reconstruction

International Nuclear Information System (INIS)

Petroni, Filippo; Serva, Maurizio

2008-01-01

Languages evolve over time according to a process in which reproduction, mutation and extinction are all possible. This is very similar to haploid evolution for asexual organisms and for the mitochondrial DNA of complex ones. Exploiting this similarity, it is possible, in principle, to verify hypotheses concerning the relationship among languages and to reconstruct their family tree. The key point is the definition of the distances among pairs of languages in analogy with the genetic distances among pairs of organisms. Distances can be evaluated by comparing grammar and/or vocabulary, but while it is difficult, if not impossible, to quantify grammar distance, it is possible to measure a distance from vocabulary differences. The method used by glottochronology computes distances from the percentage of shared 'cognates', which are words with a common historical origin. The weak point of this method is that subjective judgment plays a significant role. Here we define the distance of two languages by considering a renormalized edit distance among words with the same meaning and averaging over the two hundred words contained in a Swadesh list. In our approach the vocabulary of a language is the analogue of DNA for organisms. The advantage is that we avoid subjectivity and, furthermore, reproducibility of results is guaranteed. We apply our method to the Indo-European and the Austronesian groups, considering, in both cases, fifty different languages. The two trees obtained are, in many respects, similar to those found by glottochronologists, with some important differences as regards the positions of a few languages. In order to support these different results we separately analyze the structure of the distances of these languages with respect to all the others

Language distance and tree reconstruction

Science.gov (United States)

Petroni, Filippo; Serva, Maurizio

2008-08-01

Languages evolve over time according to a process in which reproduction, mutation and extinction are all possible. This is very similar to haploid evolution for asexual organisms and for the mitochondrial DNA of complex ones. Exploiting this similarity, it is possible, in principle, to verify hypotheses concerning the relationship among languages and to reconstruct their family tree. The key point is the definition of the distances among pairs of languages in analogy with the genetic distances among pairs of organisms. Distances can be evaluated by comparing grammar and/or vocabulary, but while it is difficult, if not impossible, to quantify grammar distance, it is possible to measure a distance from vocabulary differences. The method used by glottochronology computes distances from the percentage of shared 'cognates', which are words with a common historical origin. The weak point of this method is that subjective judgment plays a significant role. Here we define the distance of two languages by considering a renormalized edit distance among words with the same meaning and averaging over the two hundred words contained in a Swadesh list. In our approach the vocabulary of a language is the analogue of DNA for organisms. The advantage is that we avoid subjectivity and, furthermore, reproducibility of results is guaranteed. We apply our method to the Indo-European and the Austronesian groups, considering, in both cases, fifty different languages. The two trees obtained are, in many respects, similar to those found by glottochronologists, with some important differences as regards the positions of a few languages. In order to support these different results we separately analyze the structure of the distances of these languages with respect to all the others.

Interactive Distance Learning in Connecticut.

Science.gov (United States)

Pietras, Jesse John; Murphy, Robert J.

This paper provides an overview of distance learning activities in Connecticut and addresses the feasibility of such activities. Distance education programs have evolved from the one dimensional electronic mail systems to the use of sophisticated digital fiber networks. The Middlesex Distance Learning Consortium has developed a long-range plan to…

On the mechanism of formation of the Efimov states in the helium 4He trimer

International Nuclear Information System (INIS)

Kolganova, E.A.; Motovilov, A.K.

1998-01-01

A mechanism of disappearance and formation of the Efimov levels of the helium 4 He 3 trimer is studied when the force of interatomic interaction is changed. It is shown that these levels arise from virtual levels which are in turn formed from (quasi)resonances settled on the real axis. The resonances including virtual levels are calculated by the method based on the solution of the boundary value problem, at complex energies, for the Faddeev differential equations describing the scattering processes (2 + 1 → 2 + 1; 1 + 1 + 1). All the calculations are performed with the known interatomic Aziz He-He-potential HFD-B. A very strong repulsive component of this potential at short distances between helium atoms is approximated by a hard core. A special attention is paid to the substantiation of the method used for computing resonances and to the investigation of its applicability range

Motivation in Distance Leaming

Directory of Open Access Journals (Sweden)

Daniela Brečko

1996-12-01

Full Text Available It is estimated that motivation is one of the most important psychological functions making it possible for people to leam even in conditions that do not meet their needs. In distance learning, a form of autonomous learning, motivation is of outmost importance. When adopting this method in learning an individual has to stimulate himself and take learning decisions on his or her own. These specific characteristics of distance learning should be taken into account. This all different factors maintaining the motivation of partici­pants in distance learning are to be included. Moreover, motivation in distance learning can be stimulated with specific learning materials, clear instructions and guide-lines, an efficient feed back, personal contact between tutors and parti­cipants, stimulating learning letters, telephone calls, encouraging letters and through maintaining a positive relationship between tutor and participant.

Machine learning enhanced optical distance sensor

Science.gov (United States)

Amin, M. Junaid; Riza, N. A.

2018-01-01

Presented for the first time is a machine learning enhanced optical distance sensor. The distance sensor is based on our previously demonstrated distance measurement technique that uses an Electronically Controlled Variable Focus Lens (ECVFL) with a laser source to illuminate a target plane with a controlled optical beam spot. This spot with varying spot sizes is viewed by an off-axis camera and the spot size data is processed to compute the distance. In particular, proposed and demonstrated in this paper is the use of a regularized polynomial regression based supervised machine learning algorithm to enhance the accuracy of the operational sensor. The algorithm uses the acquired features and corresponding labels that are the actual target distance values to train a machine learning model. The optimized training model is trained over a 1000 mm (or 1 m) experimental target distance range. Using the machine learning algorithm produces a training set and testing set distance measurement errors of learning. Applications for the proposed sensor include industrial scenario distance sensing where target material specific training models can be generated to realize low <1% measurement error distance measurements.

Energy of the Isolated Metastable Iron-Nickel FCC Nanocluster with a Carbon Atom in the Tetragonal Interstice.

Science.gov (United States)

Bondarenko, Natalya V; Nedolya, Anatoliy V

2017-12-01

The energy of the isolated iron-nickel nanocluster was calculated by molecular mechanics method using Lennard-Jones potential. The cluster included a carbon atom that drifted from an inside octahedral interstice to a tetrahedral interstice in [Formula: see text] direction and after that in direction to the surface. In addition, one of 14 iron atoms was replaced by a nickel atom, the position of which was changing during simulation.The energy of the nanocluster was estimated at the different interatomic distances. As a result of simulation, the optimal interatomic distances of Fe-Ni-C nanocluster was chosen for the simulation, in which height of the potential barrier was maximal and face-centered cubic (FCC) nanocluster was the most stable.It is shown that there were three main positions of a nickel atom that significantly affected nanocluster's energy.The calculation results indicated that position of the carbon atom in the octahedral interstice was more energetically favorable than tetrahedral interstice in the case of FCC nanocluster. On the other side, the potential barrier was smaller in the direction [Formula: see text] than in the direction .This indicates that there are two ways for carbon atom to drift to the surface of the nanocluster.

Long-distance calls in Neotropical primates

Directory of Open Access Journals (Sweden)

Oliveira Dilmar A.G.

2004-01-01

Full Text Available Long-distance calls are widespread among primates. Several studies concentrate on such calls in just one or in few species, while few studies have treated more general trends within the order. The common features that usually characterize these vocalizations are related to long-distance propagation of sounds. The proposed functions of primate long-distance calls can be divided into extragroup and intragroup ones. Extragroup functions relate to mate defense, mate attraction or resource defense, while intragroup functions involve group coordination or alarm. Among Neotropical primates, several species perform long-distance calls that seem more related to intragroup coordination, markedly in atelines. Callitrichids present long-distance calls that are employed both in intragroup coordination and intergroup contests or spacing. Examples of extragroup directed long-distance calls are the duets of titi monkeys and the roars and barks of howler monkeys. Considerable complexity and gradation exist in the long-distance call repertoires of some Neotropical primates, and female long-distance calls are probably more important in non-duetting species than usually thought. Future research must focus on larger trends in the evolution of primate long-distance calls, including the phylogeny of calling repertoires and the relationships between form and function in these signals.

Robustness of Distance-to-Default

DEFF Research Database (Denmark)

Jessen, Cathrine; Lando, David

2013-01-01

Distance-to-default is a remarkably robust measure for ranking firms according to their risk of default. The ranking seems to work despite the fact that the Merton model from which the measure is derived produces default probabilities that are far too small when applied to real data. We use...... simulations to investigate the robustness of the distance-to-default measure to different model specifications. Overall we find distance-to-default to be robust to a number of deviations from the simple Merton model that involve different asset value dynamics and different default triggering mechanisms....... A notable exception is a model with stochastic volatility of assets. In this case both the ranking of firms and the estimated default probabilities using distance-to-default perform significantly worse. We therefore propose a volatility adjustment of the distance-to-default measure, that significantly...

Distance Education in Technological Age

Directory of Open Access Journals (Sweden)

R .C. SHARMA

2005-04-01

Full Text Available Distance Education in Technological AgeRomesh Verma (Editor, New Delhi: Anmol Publications, 2005, ISBN 81-261-2210-2, pp. 419 Reviewed by R C SHARMARegional DirectorIndira Gandhi National Open University-INDIA The advancements in information and communication technologies have brought significant changes in the way the open and distance learning are provided to the learners. The impact of such changes is quite visible in both developed and developing countries. Switching over to online mode, joining hands with private initiatives and making a presence in foreign waters, are some of the hallmarks of the open and distance education (ODE institutions in developing countries. The compilation of twenty six essays on themes as applicable to ODE has resulted in the book, “Distance Education in Technological Age”. These essays follow a progressive style of narration, starting from describing conceptual framework of distance education, how the distance education was emerged on the global scene and in India, and then goes on to discuss emergence of online distance education and research aspects in ODE. The initial four chapters provide a detailed account of historical development and growth of distance education in India and State Open University and National Open University Model in India . Student support services are pivot to any distance education and much of its success depends on how well the support services are provided. These are discussed from national and international perspective. The issues of collaborative learning, learning on demand, life long learning, learning-unlearning and re-learning model and strategic alliances have also given due space by the authors. An assortment of technologies like communication technology, domestic technology, information technology, mass media and entertainment technology, media technology and educational technology give an idea of how these technologies are being adopted in the open universities. The study

Improved Iris Recognition through Fusion of Hamming Distance and Fragile Bit Distance.

Science.gov (United States)

Hollingsworth, Karen P; Bowyer, Kevin W; Flynn, Patrick J

2011-12-01

The most common iris biometric algorithm represents the texture of an iris using a binary iris code. Not all bits in an iris code are equally consistent. A bit is deemed fragile if its value changes across iris codes created from different images of the same iris. Previous research has shown that iris recognition performance can be improved by masking these fragile bits. Rather than ignoring fragile bits completely, we consider what beneficial information can be obtained from the fragile bits. We find that the locations of fragile bits tend to be consistent across different iris codes of the same eye. We present a metric, called the fragile bit distance, which quantitatively measures the coincidence of the fragile bit patterns in two iris codes. We find that score fusion of fragile bit distance and Hamming distance works better for recognition than Hamming distance alone. To our knowledge, this is the first and only work to use the coincidence of fragile bit locations to improve the accuracy of matches.

Partial distance correlation with methods for dissimilarities

OpenAIRE

Székely, Gábor J.; Rizzo, Maria L.

2014-01-01

Distance covariance and distance correlation are scalar coefficients that characterize independence of random vectors in arbitrary dimension. Properties, extensions, and applications of distance correlation have been discussed in the recent literature, but the problem of defining the partial distance correlation has remained an open question of considerable interest. The problem of partial distance correlation is more complex than partial correlation partly because the squared distance covari...

Making Distance Visible: Assembling Nearness in an Online Distance Learning Programme

Directory of Open Access Journals (Sweden)

Jen Ross

2013-09-01

Full Text Available Online distance learners are in a particularly complex relationship with the educational institutions they belong to (Bayne, Gallagher, & Lamb, 2012. For part-time distance students, arrivals and departures can be multiple and invisible as students take courses, take breaks, move into independent study phases of a programme, find work or family commitments overtaking their study time, experience personal upheaval or loss, and find alignments between their professional and academic work. These comings and goings indicate a fluid and temporary assemblage of engagement, not a permanent or stable state of either “presence” or “distance”. This paper draws from interview data from the “New Geographies of Learning” project, a research project exploring the notions of space and institution for the MSc in Digital Education at the University of Edinburgh, and from literature on distance learning and online community. The concept of nearness emerged from the data analyzing the comings and goings of students on a fully online programme. It proposes that “nearness” to a distance programme is a temporary assemblage of people, circumstances, and technologies. This state is difficult to establish and impossible to sustain in an uninterrupted way over the long period of time that many are engaged in part-time study. Interruptions and subsequent returns should therefore be seen as normal in the practice of studying as an online distance learner, and teachers and institutions should work to help students develop resilience in negotiating various states of nearness. Four strategies for increasing this resilience are proposed: recognising nearness as effortful; identifying affinities; valuing perspective shifts; and designing openings.

Caracterización estructural de vidrios con altos contenidos de óxidos de hierro obtenidos a partir de un residuo de la hidrometalurgia del zinc

OpenAIRE

Romero, M.; Rincón, J. María; Mûsik, S.; Kozhukharov, W.

1997-01-01

It has been carried out the structural characterization of high oxide content glasses obtained by melting of a goethite industrial waste from the zinc hydrometallurgy with other raw materials as dolomite and glass cullet. The structural characterization has been carried out by X-Ray Diffraction (XRD), X-Ray Diffraction by Amorphous Dispersion (RDF) and Mossbauer spectroscopy. It has been determined the interatomic distance, the oxidation state and the coordination of iron atoms in these glass...

A computational study of pressure-induced structural transition in ThSb

International Nuclear Information System (INIS)

Trinadh, Ch.U.M.; Rajagopalan, M.; Natarajan, S.

1997-01-01

The pressure induced phase transition from NaCl-type to CsCl-type structure in ThSb was studied using total energy calculations by tight-binding linear muffin tin orbital (TBLMTO) method within atomic sphere approximation (ASA). The density of states (DOS) at ambient pressure was compared with resonant photoemission studies (PES). The variation in interatomic distances during the transition was found to be in agreement with high pressure x-ray diffraction (HPXRD) studies. (author)

Distance labeling schemes for trees

DEFF Research Database (Denmark)

Alstrup, Stephen; Gørtz, Inge Li; Bistrup Halvorsen, Esben

2016-01-01

We consider distance labeling schemes for trees: given a tree with n nodes, label the nodes with binary strings such that, given the labels of any two nodes, one can determine, by looking only at the labels, the distance in the tree between the two nodes. A lower bound by Gavoille et al. [Gavoille...... variants such as, for example, small distances in trees [Alstrup et al., SODA, 2003]. We improve the known upper and lower bounds of exact distance labeling by showing that 1/4 log2(n) bits are needed and that 1/2 log2(n) bits are sufficient. We also give (1 + ε)-stretch labeling schemes using Theta...

Thermally excited capillary waves at vapor/liquid interfaces of water-alcohol mixtures

International Nuclear Information System (INIS)

Vaknin, David; Bu Wei; Sung, Jaeho; Jeon, Yoonnam; Kim, Doseok

2009-01-01

The density profiles of liquid/vapor interfaces of water-alcohol (methanol, ethanol and propanol) mixtures were studied by surface-sensitive synchrotron x-ray scattering techniques. X-ray reflectivity and diffuse scattering measurements, from the pure and mixed liquids, were analyzed in the framework of capillary wave theory to address the characteristic length scales of the intrinsic roughness and the shortest capillary wavelength (alternatively, the upper wavevector cutoff in capillary wave theory). Our results establish that the intrinsic roughness is dominated by average interatomic distances. The extracted effective upper wavevector cutoff indicates capillary wave theory breaks down at distances of the order of bulk correlation lengths.

Tracking frequency laser distance gauge

International Nuclear Information System (INIS)

Phillips, J.D.; Reasenberg, R.D.

2005-01-01

Advanced astronomical missions with greatly enhanced resolution and physics missions of unprecedented accuracy will require laser distance gauges of substantially improved performance. We describe a laser gauge, based on Pound-Drever-Hall locking, in which the optical frequency is adjusted to maintain an interferometer's null condition. This technique has been demonstrated with pm performance. Automatic fringe hopping allows it to track arbitrary distance changes. The instrument is intrinsically free of the nm-scale cyclic bias present in traditional (heterodyne) high-precision laser gauges. The output is a radio frequency, readily measured to sufficient accuracy. The laser gauge has operated in a resonant cavity, which improves precision, can suppress the effects of misalignments, and makes possible precise automatic alignment. The measurement of absolute distance requires little or no additional hardware, and has also been demonstrated. The proof-of-concept version, based on a stabilized HeNe laser and operating on a 0.5 m path, has achieved 10 pm precision with 0.1 s integration time, and 0.1 mm absolute distance accuracy. This version has also followed substantial distance changes as fast as 16 mm/s. We show that, if the precision in optical frequency is a fixed fraction of the linewidth, both incremental and absolute distance precision are independent of the distance measured. We discuss systematic error sources, and present plans for a new version of the gauge based on semiconductor lasers and fiber-coupled components

ADULT LEARNERS IN DISTANCE HIGHER EDUCATION

Directory of Open Access Journals (Sweden)

NORICA-FELICIA BUCUR

2012-05-01

Full Text Available This paper attempts at identifying the main features that characterize distance higher education and adult education, respectively, in order to be able to establish to what extent adult learners can fit in distance higher education programs. The historical background of distance learning education, the factors that influence adult learners, and distance learning’s key objectives, effects, issues, advantages, and disadvantages are to be briefly investigated in order to reach the purpose of this paper. Recent developments in Information Technology have led to a new approach to teaching and learning, especially as far as adult learning and distance learning are concerned. Thus, this study will also focus on the consequences of using technology for course design, delivery, and the perception of adult learners participating in distance learning.

Distance and Cable Length Measurement System

Science.gov (United States)

Hernández, Sergio Elias; Acosta, Leopoldo; Toledo, Jonay

2009-01-01

A simple, economic and successful design for distance and cable length detection is presented. The measurement system is based on the continuous repetition of a pulse that endlessly travels along the distance to be detected. There is a pulse repeater at both ends of the distance or cable to be measured. The endless repetition of the pulse generates a frequency that varies almost inversely with the distance to be measured. The resolution and distance or cable length range could be adjusted by varying the repetition time delay introduced at both ends and the measurement time. With this design a distance can be measured with centimeter resolution using electronic system with microsecond resolution, simplifying classical time of flight designs which require electronics with picosecond resolution. This design was also applied to position measurement. PMID:22303169

The KNK II/1 fuel assembly NY-205: Compilation of the irradiation history and the fuel and fuel pin fabrication data of the INTERATOM data bank system BESEX

International Nuclear Information System (INIS)

Patzer, G.; Geier, F.

1988-01-01

The fuel assembly NY-205 has been irradiated during the first and the second core of KNK II with a total residence time of 832 equivalent full-power days. A maximum burnup of 175.000 MWd/tHM or 18.6 % was reached with a maximum steel damage of 66 dpa-NRT. For the cladding the materials 1.4970 and 1.4981 have been used in different metallurgical conditions, and for the Uranium/Plutonium mixed- oxide fuel the most important variants of the major fabrication parameters had been realized. The assembly will be brought to the Hot Cells of the KfK Karlsruhe for post-irradiation examination in February 1988, so that the knowledge of the fabrication data is of interest for the selection of fuel pins and for the evaluation of the examination results. Therefore this report compiles the fuel and fuel pin fabrication data from the INTERATOM data bank system BESEX and additionally, an overview of the irradiation history of the assembly is given [de

Distance Education in Entwicklungslandern.

Science.gov (United States)

German Foundation for International Development, Bonn (West Germany).

Seminar and conference reports and working papers on distance education of adults, which reflect the experiences of many countries, are presented. Contents include the draft report of the 1979 International Seminar on Distance Education held in Addis Ababa, Ethiopia, which was jointly sponsored by the United Nations Economic Commission for Africa…

Distance sampling methods and applications

CERN Document Server

Buckland, S T; Marques, T A; Oedekoven, C S

2015-01-01

In this book, the authors cover the basic methods and advances within distance sampling that are most valuable to practitioners and in ecology more broadly. This is the fourth book dedicated to distance sampling. In the decade since the last book published, there have been a number of new developments. The intervening years have also shown which advances are of most use. This self-contained book covers topics from the previous publications, while also including recent developments in method, software and application. Distance sampling refers to a suite of methods, including line and point transect sampling, in which animal density or abundance is estimated from a sample of distances to detected individuals. The book illustrates these methods through case studies; data sets and computer code are supplied to readers through the book’s accompanying website.  Some of the case studies use the software Distance, while others use R code. The book is in three parts.  The first part addresses basic methods, the ...

Anxiety and Resistance in Distance Learning

OpenAIRE

Nazime Tuncay; Huseyin Uzunboylu

2010-01-01

The purpose of this study was to investigate students' anxiety and resistance towards learning through distance education.Specifically, the study sought answers to the following questions: -What are the reasons of students not choosing distancelearning courses? -Which symptoms of anxiety, if any, do distance learner’s exhibit towards distance learning? Does genderhave any significant relationships with distance learners' perception of factors that affect their anxiety and resistance? A totalo...

Revised Distances to 21 Supernova Remnants

Science.gov (United States)

Ranasinghe, S.; Leahy, D. A.

2018-05-01

We carry out a comprehensive study of H I 21 cm line observations and 13CO line observations of 21 supernova remnants (SNRs). The aim of the study is to search for H I absorption features to obtain kinematic distances in a consistent manner. The 21 SNRs are in the region of sky covered by the Very Large Array Galactic Plane Survey (H I 21 cm observations) and Galactic Ring Survey (13CO line observations). We obtain revised distances for 10 SNRs based on new evidence in the H I and 13CO observations. We revise distances for the other 11 SNRs based on an updated rotation curve and new error analysis. The mean change in distance for the 21 SNRs is ≃25%, i.e., a change of 1.5 kpc compared to a mean distance for the sample of 6.4 kpc. This has a significant impact on interpretation of the physical state of these SNRs. For example, using a Sedov model, age and explosion energy scale as the square of distance, and inferred ISM density scales as distance.

A cognitively grounded measure of pronunciation distance.

Directory of Open Access Journals (Sweden)

Martijn Wieling

Full Text Available In this study we develop pronunciation distances based on naive discriminative learning (NDL. Measures of pronunciation distance are used in several subfields of linguistics, including psycholinguistics, dialectology and typology. In contrast to the commonly used Levenshtein algorithm, NDL is grounded in cognitive theory of competitive reinforcement learning and is able to generate asymmetrical pronunciation distances. In a first study, we validated the NDL-based pronunciation distances by comparing them to a large set of native-likeness ratings given by native American English speakers when presented with accented English speech. In a second study, the NDL-based pronunciation distances were validated on the basis of perceptual dialect distances of Norwegian speakers. Results indicated that the NDL-based pronunciation distances matched perceptual distances reasonably well with correlations ranging between 0.7 and 0.8. While the correlations were comparable to those obtained using the Levenshtein distance, the NDL-based approach is more flexible as it is also able to incorporate acoustic information other than sound segments.

Fast Exact Euclidean Distance (FEED) Transformation

NARCIS (Netherlands)

Schouten, Theo; Kittler, J.; van den Broek, Egon; Petrou, M.; Nixon, M.

2004-01-01

Fast Exact Euclidean Distance (FEED) transformation is introduced, starting from the inverse of the distance transformation. The prohibitive computational cost of a naive implementation of traditional Euclidean Distance Transformation, is tackled by three operations: restriction of both the number

Distance : between deixis and perspectivity

OpenAIRE

Meermann, Anastasia; Sonnenhauser, Barbara

2015-01-01

Discussing exemplary applications of the notion of distance in linguistic analysis, this paper shows that very different phenomena are described in terms of this concept. It is argued that in order to overcome the problems arising from this mixup, deixis, distance and perspectivity have to be distinguished and their interrelations need to be described. Thereby, distance emerges as part of a recursive process mediating between situation-bound deixis and discourse-level perspectivity. This is i...

Path-integral simulation of ice Ih: The effect of pressure

Science.gov (United States)

Herrero, Carlos P.; Ramírez, Rafael

2011-12-01

The effect of pressure on structural and thermodynamic properties of ice Ih has been studied by means of path-integral molecular dynamics simulations at temperatures between 50 and 300 K. Interatomic interactions were modeled by using the effective q-TIP4P/F potential for flexible water. Positive (compression) and negative (tension) pressures have been considered, which allowed us to approach the limits for the mechanical stability of this solid water phase. We have studied the pressure dependence of the crystal volume, bulk modulus, interatomic distances, atomic delocalization, and kinetic energy. The spinodal point at both negative and positive pressures is derived from the vanishing of the bulk modulus. For P300 K. At positive pressure the spinodal is associated with ice amorphization, and at low temperatures it is found to be between 1.1 and 1.3 GPa. Quantum nuclear effects cause a reduction of the metastability region of ice Ih.

The distances of the Galactic Novae

Science.gov (United States)

Ozdonmez, Aykut; Guver, Tolga; Cabrera-Lavers, Antonio; Ak, Tansel

2016-07-01

Using location of the RC stars on the CMDs obtained from the UKIDSS, VISTA and 2MASS photometry, we have derived the reddening-distance relations towards each Galactic nova for which at least one independent reddening measurement exists. We were able to determine the distances of 72 Galactic novae and set lower limits on the distances of 45 systems. The reddening curves of the systems are presented. These curves can be also used to estimate reddening or the distance of any source, whose location is close to the position of the nova in our sample. The distance measurement method in our study can be easily applicable to any source, especially for ones that concentrated along the Galactic plane.

ETUDE - European Trade Union Distance Education.

Science.gov (United States)

Creanor, Linda; Walker, Steve

2000-01-01

Describes transnational distance learning activities among European trade union educators carried out as part of the European Trade Union Distance Education (ETUDE) project, supported by the European Commission. Highlights include the context of international trade union distance education; tutor training course; tutors' experiences; and…

Space-efficient path-reporting approximate distance oracles

DEFF Research Database (Denmark)

Elkin, Michael; Neiman, Ofer; Wulff-Nilsen, Christian

2016-01-01

We consider approximate path-reporting distance oracles, distance labeling and labeled routing with extremely low space requirements, for general undirected graphs. For distance oracles, we show how to break the nlog⁡n space bound of Thorup and Zwick if approximate paths rather than distances need...

What do long-distance caregivers do? : judgment of propositions and the epistemics of long-distance family relationships

OpenAIRE

中川, 敦; Atsushi, NAKAGAWA

2015-01-01

This study clarifies what long-distance caregivers do. To this end, I conducted a conversation analysis of video data of a care conference in which a long-distance caregiver participated. When a professional caregiver proposes a care plan to a long-distance caregiver, he/she substitutes technical terms with laymen terms for easy understanding, indicating his/her orientation that a long-distance caregiver is not a professional. However, if the caregiver laughs or averts his/her eyes during the...

Phylogenetic inference with weighted codon evolutionary distances.

Science.gov (United States)

Criscuolo, Alexis; Michel, Christian J

2009-04-01

We develop a new approach to estimate a matrix of pairwise evolutionary distances from a codon-based alignment based on a codon evolutionary model. The method first computes a standard distance matrix for each of the three codon positions. Then these three distance matrices are weighted according to an estimate of the global evolutionary rate of each codon position and averaged into a unique distance matrix. Using a large set of both real and simulated codon-based alignments of nucleotide sequences, we show that this approach leads to distance matrices that have a significantly better treelikeness compared to those obtained by standard nucleotide evolutionary distances. We also propose an alternative weighting to eliminate the part of the noise often associated with some codon positions, particularly the third position, which is known to induce a fast evolutionary rate. Simulation results show that fast distance-based tree reconstruction algorithms on distance matrices based on this codon position weighting can lead to phylogenetic trees that are at least as accurate as, if not better, than those inferred by maximum likelihood. Finally, a well-known multigene dataset composed of eight yeast species and 106 codon-based alignments is reanalyzed and shows that our codon evolutionary distances allow building a phylogenetic tree which is similar to those obtained by non-distance-based methods (e.g., maximum parsimony and maximum likelihood) and also significantly improved compared to standard nucleotide evolutionary distance estimates.

Zinc fingers, zinc clusters, and zinc twists in DNA-binding protein domains

International Nuclear Information System (INIS)

Vallee, B.L.; Auld, D.S.; Coleman, J.E.

1991-01-01

The authors recognize three distinct motifs of DNA-binding zinc proteins: (i) zinc fingers, (ii) zinc clusters, and (iii) zinc twists. Until very recently, x-ray crystallographic or NMR three-dimensional structure analyses of DNA-binding zinc proteins have not been available to serve as standards of reference for the zinc binding sites of these families of proteins. Those of the DNA-binding domains of the fungal transcription factor GAL4 and the rat glucocorticoid receptor are the first to have been determined. Both proteins contain two zinc binding sites, and in both, cysteine residues are the sole zinc ligands. In GAL4, two zinc atoms are bound to six cysteine residues which form a zinc cluster akin to that of metallothionein; the distance between the two zinc atoms of GAL4 is ∼3.5 angstrom. In the glucocorticoid receptor, each zinc atom is bound to four cysteine residues; the interatomic zinc-zinc distance is ∼13 angstrom, and in this instance, a zinc twist is represented by a helical DNA recognition site located between the two zinc atoms. Zinc clusters and zinc twists are here recognized as two distinctive motifs in DNA-binding proteins containing multiple zinc atoms. For native zinc fingers, structural data do not exist as yet; consequently, the interatomic distances between zinc atoms are not known. As further structural data become available, the structural and functional significance of these different motifs in their binding to DNA and other proteins participating in the transmission of the genetic message will become apparent

Distance Education at Silesian University of Technology

Directory of Open Access Journals (Sweden)

Piotr Klosowski

2008-12-01

Full Text Available This paper presents Distance Learning Platform used by Silesian University of Technology. Distance Learning Platform is based on modular object-oriented dynamic learning environment, represents LMS (Learning Management Systems technology, a software package designed to help educators create quality online courses. Currently on Distance Learning Platform at Silesian University of Technology are available over 520 online courses created for students of twelve University's faculties. Number of Distance Learning Platform users exceeds 12000. Distance Learning Platform works as typically asynchronous e-learning service, but in the future more synchronous e-learning services will be added. Distance Learning Platform has great potential to create a successful elearning experience by providing a plethora of excellent tools that can be used to enhance conventional classroom instruction, in hybrid courses, or any distance learning arrangements.

ORTEP-III: Oak Ridge Thermal Ellipsoid Plot Program for crystal structure illustrations

Energy Technology Data Exchange (ETDEWEB)

Burnett, M.N.; Johnson, C.K.

1996-07-01

This report describes a computer program for drawing crystal structure illustrations. Ball-and-stick type illustrations of a quality suitable for publication are produced with either spheres or thermal-motion probability ellipsoids on the atomic sites. The program can also produce stereoscopic pairs of illustrations which aid in the visualization of complex packing arrangements of atoms and thermal motion patterns. Interatomic distances, bond angles, and principal axes of thermal motion are also calculated to aid the structural study.

Measurement and Theory of Hydrogen Bonding Contribution to Isosteric DNA Base Pairs

OpenAIRE

Khakshoor, Omid; Wheeler, Steven E.; Houk, K. N.; Kool, Eric T.

2012-01-01

We address the recent debate surrounding the ability of 2,4-difluorotoluene (F), a low-polarity mimic of thymine (T), to form a hydrogen-bonded complex with adenine in DNA. The hydrogen bonding ability of F has been characterized as small to zero in various experimental studies, and moderate to small in computational studies. However, recent X-ray crystallographic studies of difluorotoluene in DNA/RNA have indicated, based on interatomic distances, possible hydrogen bonding interactions betwe...

Crystal structure of Na3Sc2(PO4)3 at 60 deg C

International Nuclear Information System (INIS)

Lazoryak, B.I.; Kalinin, V.B.; Stefanovich, S.Yu.; Efremov, V.A.

1980-01-01

The structure of the ferroelectric phase of Na 3 Sc 2 (PO 4 ) 3 compound was studied. Na 3 Sc 2 (PO 4 ) 3 monocrystal heated by a jet of warm N 2 was investigated at 60 deg C. The rhombohedron modification was determined: a=8.927(3), c=22.34(4) A, Z=6, space group R anti 3c. Interatomic distances and inner angles of polyhedrons in Na 3 Sc 2 (PO 4 ) 3 structure were determined

EXAFS study of short range order in Fe-Zr amorphous alloys

International Nuclear Information System (INIS)

Fernandez-Gubieda, M.L.; Gorria, P.; Barandiaran, J.M.; Barquin, L.F.

1995-01-01

Room temperature X-ray absorption spectra on Fe K-edge have been performed in Fe 100-x-y Zr x B y and Fe 86 Zr 7 Cu 1 B 6 alloys (x=7, 7.7, 9; y=0, 2, 4, 6). Fe-Fe coordination number and interatomic distances do not change in any sample. However, small changes in the Fe-Zr short range order, which could explain the evolution of the magnetic properties, have been observed. (orig.)

Structural characterization of hog iron oxide content glasses obtained from zinc hydrometallurgy wastes

International Nuclear Information System (INIS)

Romero, M.; Rincon, J.M.; Musik, S.; Kozhujharov, W.

1997-01-01

It has been carried out the structural characterization of high oxide content glasses obtained by melting of a goethite industrial waste from the zinc hydrometallurgy with other raw materials as dolomite and glass cullet. The structural characterization has been carried out by X-ray Diffraction (XRD), X-Ray Diffraction by Amorphous Dispersion (RDF) and Mossbauer spectroscopy. It has been determined the interatomic distance, the oxidation state and the coordination of iron atoms in these glasses. (Author) 16 refs

A Streaming Distance Transform Algorithm for Neighborhood-Sequence Distances

Directory of Open Access Journals (Sweden)

Nicolas Normand

2014-09-01

Full Text Available We describe an algorithm that computes a “translated” 2D Neighborhood-Sequence Distance Transform (DT using a look up table approach. It requires a single raster scan of the input image and produces one line of output for every line of input. The neighborhood sequence is specified either by providing one period of some integer periodic sequence or by providing the rate of appearance of neighborhoods. The full algorithm optionally derives the regular (centered DT from the “translated” DT, providing the result image on-the-fly, with a minimal delay, before the input image is fully processed. Its efficiency can benefit all applications that use neighborhood- sequence distances, particularly when pipelined processing architectures are involved, or when the size of objects in the source image is limited.

Cepheids Geometrical Distances Using Space Interferometry

Science.gov (United States)

Marengo, M.; Karovska, M.; Sasselov, D. D.; Sanchez, M.

2004-05-01

A space based interferometer with a sub-milliarcsecond resolution in the UV-optical will provide a new avenue for the calibration of primary distance indicators with unprecedented accuracy, by allowing very accurate and stable measurements of Cepheids pulsation amplitudes at wavelengths not accessible from the ground. Sasselov & Karovska (1994) have shown that interferometers allow very accurate measurements of Cepheids distances by using a ``geometric'' variant of the Baade-Wesselink method. This method has been succesfully applied to derive distances and radii of nearby Cepheids using ground-based near-IR and optical interferometers, within a 15% accuracy level. Our study shows that the main source of error in these measurements is due to the perturbing effects of the Earth atmosphere, which is the limiting factor in the interferometer stability. A space interferometer will not suffer from this intrinsic limitations, and can potentially lead to improve astronomical distance measurements by an order of magnitude in precision. We discuss here the technical requirements that a space based facility will need to carry out this project, allowing distance measurements within a few percent accuracy level. We will finally discuss how a sub-milliarcsecond resolution will allow the direct distance determination for hundreds of galactic sources, and provide a substantial improvement in the zero-point of the Cepheid distance scale.

THE WEIGHTED POINCARÉ DISTANCE IN THE HALF PLANE

OpenAIRE

Byun, Jisoo; Baek, Seung Min; Cho, Hong Rae; Lee, Han-Wool

2014-01-01

In this paper we introduce the weighted Poincaré distance and the induced distance by the weighted Bloch type space. We prove that the weighted Poincaré distance is identical to the inner distance generated by the induced distance.

Intra- and inter-atomic optical transitions of Fe, Co, and Ni ferrocyanides studied using first-principles many-electron calculations

Energy Technology Data Exchange (ETDEWEB)

Watanabe, Shinta, E-mail: s-watanabe@nucl.nagoya-u.ac.jp, E-mail: j-onoe@nucl.nagoya-u.ac.jp; Sawada, Yuki; Nakaya, Masato; Yoshino, Masahito; Nagasaki, Takanori; Onoe, Jun, E-mail: s-watanabe@nucl.nagoya-u.ac.jp, E-mail: j-onoe@nucl.nagoya-u.ac.jp [Department of Materials, Physics and Energy Engineering, Graduated School of Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya, Aichi 464-8603 (Japan); Kameyama, Tatsuya; Torimoto, Tsukasa [Department of Crystalline Materials Science, Graduated School of Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya, Aichi 464-8603 (Japan); Inaba, Yusuke; Takahashi, Hideharu; Takeshita, Kenji [Research Laboratory for Nuclear Reactors, Tokyo Institute of Technology, 2-12-1-N1-16 O-okayama, Meguro-ku, Tokyo 152-8550 (Japan)

2016-06-21

We have investigated the electronic structures and optical properties of Fe, Co, and Ni ferrocyanide nanoparticles using first-principles relativistic many-electron calculations. The overall features of the theoretical absorption spectra for Fe, Ni, and Co ferrocyanides calculated using a first-principles many-electron method well reproduced the experimental one. The origins of the experimental absorption spectra were clarified by performing a configuration analysis based on the many-electron wave functions. For Fe ferrocyanide, the experimental absorption peaks originated from not only the charge-transfer transitions from Fe{sup 2+} to Fe{sup 3+} but also the 3d-3d intra-transitions of Fe{sup 3+} ions. In addition, the spin crossover transition of Fe{sup 3+} predicted by the many-electron calculations was about 0.24 eV. For Co ferrocyanide, the experimental absorption peaks were mainly attributed to the 3d-3d intra-transitions of Fe{sup 2+} ions. In contrast to the Fe and Co ferrocyanides, Ni ferrocyanide showed that the absorption peaks originated from the 3d-3d intra-transitions of Ni{sup 3+} ions in a low-energy region, while from both the 3d-3d intra-transitions of Fe{sup 2+} ions and the charge-transfer transitions from Fe{sup 2+} to Ni{sup 3+} in a high-energy region. These results were quite different from those of density-functional theory (DFT) calculations. The discrepancy between the results of DFT calculations and those of many-electron calculations suggested that the intra- and inter-atomic transitions of transition metal ions are significantly affected by the many-body effects of strongly correlated 3d electrons.

Measuring distances between complex networks

International Nuclear Information System (INIS)

Andrade, Roberto F.S.; Miranda, Jose G.V.; Pinho, Suani T.R.; Lobao, Thierry Petit

2008-01-01

A previously introduced concept of higher order neighborhoods in complex networks, [R.F.S. Andrade, J.G.V. Miranda, T.P. Lobao, Phys. Rev. E 73 (2006) 046101] is used to define a distance between networks with the same number of nodes. With such measure, expressed in terms of the matrix elements of the neighborhood matrices of each network, it is possible to compare, in a quantitative way, how far apart in the space of neighborhood matrices two networks are. The distance between these matrices depends on both the network topologies and the adopted node numberings. While the numbering of one network is fixed, a Monte Carlo algorithm is used to find the best numbering of the other network, in the sense that it minimizes the distance between the matrices. The minimal value found for the distance reflects differences in the neighborhood structures of the two networks that arise only from distinct topologies. This procedure ends up by providing a projection of the first network on the pattern of the second one. Examples are worked out allowing for a quantitative comparison for distances among distinct networks, as well as among distinct realizations of random networks

Computing Distances between Probabilistic Automata

Directory of Open Access Journals (Sweden)

Mathieu Tracol

2011-07-01

Full Text Available We present relaxed notions of simulation and bisimulation on Probabilistic Automata (PA, that allow some error epsilon. When epsilon is zero we retrieve the usual notions of bisimulation and simulation on PAs. We give logical characterisations of these notions by choosing suitable logics which differ from the elementary ones, L with negation and L without negation, by the modal operator. Using flow networks, we show how to compute the relations in PTIME. This allows the definition of an efficiently computable non-discounted distance between the states of a PA. A natural modification of this distance is introduced, to obtain a discounted distance, which weakens the influence of long term transitions. We compare our notions of distance to others previously defined and illustrate our approach on various examples. We also show that our distance is not expansive with respect to process algebra operators. Although L without negation is a suitable logic to characterise epsilon-(bisimulation on deterministic PAs, it is not for general PAs; interestingly, we prove that it does characterise weaker notions, called a priori epsilon-(bisimulation, which we prove to be NP-difficult to decide.

A tentative theory of large distance physics

International Nuclear Information System (INIS)

Friedan, Daniel

2003-01-01

A theoretical mechanism is devised to determine the large distance physics of spacetime. It is a two dimensional nonlinear model, the lambda model, set to govern the string world surface in an attempt to remedy the failure of string theory, as it stands. The lambda model is formulated to cancel the infrared divergent effects of handles at short distance on the world surface. The target manifold is the manifold of background spacetimes. The coupling strength is the spacetime coupling constant. The lambda model operates at 2d distance Δ -1 , very much shorter than the 2d distance μ -1 where the world surface is seen. A large characteristic spacetime distance L is given by L 2 ln(Δ/μ). Spacetime fields of wave number up to 1=L are the local coordinates for the manifold of spacetimes. The distribution of fluctuations at 2d distances shorter than Δ -1 gives the a priori measure on the target manifold, the manifold of spacetimes. If this measure concentrates at a macroscopic spacetime, then, nearby, it is a measure on the spacetime fields. The lambda model thereby constructs a spacetime quantum field theory, cutoff at ultraviolet distance L, describing physics at distances larger than L. The lambda model also constructs an effective string theory with infrared cutoff L, describing physics at distances smaller than L. The lambda model evolves outward from zero 2d distance, Δ -1 = 0, building spacetime physics starting from L ∞ and proceeding downward in L. L can be taken smaller than any distance practical for experiments, so the lambda model, if right, gives all actually observable physics. The harmonic surfaces in the manifold of spacetimes are expected to have novel nonperturbative effects at large distances. (author)

Analysing designed experiments in distance sampling

Science.gov (United States)

Stephen T. Buckland; Robin E. Russell; Brett G. Dickson; Victoria A. Saab; Donal N. Gorman; William M. Block

2009-01-01

Distance sampling is a survey technique for estimating the abundance or density of wild animal populations. Detection probabilities of animals inherently differ by species, age class, habitats, or sex. By incorporating the change in an observer's ability to detect a particular class of animals as a function of distance, distance sampling leads to density estimates...

Permutation-invariant distance between atomic configurations

Science.gov (United States)

Ferré, Grégoire; Maillet, Jean-Bernard; Stoltz, Gabriel

2015-09-01

We present a permutation-invariant distance between atomic configurations, defined through a functional representation of atomic positions. This distance enables us to directly compare different atomic environments with an arbitrary number of particles, without going through a space of reduced dimensionality (i.e., fingerprints) as an intermediate step. Moreover, this distance is naturally invariant through permutations of atoms, avoiding the time consuming associated minimization required by other common criteria (like the root mean square distance). Finally, the invariance through global rotations is accounted for by a minimization procedure in the space of rotations solved by Monte Carlo simulated annealing. A formal framework is also introduced, showing that the distance we propose verifies the property of a metric on the space of atomic configurations. Two examples of applications are proposed. The first one consists in evaluating faithfulness of some fingerprints (or descriptors), i.e., their capacity to represent the structural information of a configuration. The second application concerns structural analysis, where our distance proves to be efficient in discriminating different local structures and even classifying their degree of similarity.

Permutation-invariant distance between atomic configurations

International Nuclear Information System (INIS)

Ferré, Grégoire; Maillet, Jean-Bernard; Stoltz, Gabriel

2015-01-01

We present a permutation-invariant distance between atomic configurations, defined through a functional representation of atomic positions. This distance enables us to directly compare different atomic environments with an arbitrary number of particles, without going through a space of reduced dimensionality (i.e., fingerprints) as an intermediate step. Moreover, this distance is naturally invariant through permutations of atoms, avoiding the time consuming associated minimization required by other common criteria (like the root mean square distance). Finally, the invariance through global rotations is accounted for by a minimization procedure in the space of rotations solved by Monte Carlo simulated annealing. A formal framework is also introduced, showing that the distance we propose verifies the property of a metric on the space of atomic configurations. Two examples of applications are proposed. The first one consists in evaluating faithfulness of some fingerprints (or descriptors), i.e., their capacity to represent the structural information of a configuration. The second application concerns structural analysis, where our distance proves to be efficient in discriminating different local structures and even classifying their degree of similarity

Distance learning: its advantages and disadvantages

OpenAIRE

KEGEYAN SVETLANA ERIHOVNA

2016-01-01

Distance learning has become popular in higher institutions because of its flexibility and availability to learners and teachers at anytime, regardless of geographic location. With so many definitions and phases of distance education, this paper only focuses on the delivery mode of distance education (the use of information technology), background, and its disadvantages and advantages for today’s learners.

Modern Geometric Methods of Distance Determination

Science.gov (United States)

Thévenin, Frédéric; Falanga, Maurizio; Kuo, Cheng Yu; Pietrzyński, Grzegorz; Yamaguchi, Masaki

2017-11-01

Building a 3D picture of the Universe at any distance is one of the major challenges in astronomy, from the nearby Solar System to distant Quasars and galaxies. This goal has forced astronomers to develop techniques to estimate or to measure the distance of point sources on the sky. While most distance estimates used since the beginning of the 20th century are based on our understanding of the physics of objects of the Universe: stars, galaxies, QSOs, the direct measures of distances are based on the geometric methods as developed in ancient Greece: the parallax, which has been applied to stars for the first time in the mid-19th century. In this review, different techniques of geometrical astrometry applied to various stellar and cosmological (Megamaser) objects are presented. They consist in parallax measurements from ground based equipment or from space missions, but also in the study of binary stars or, as we shall see, of binary systems in distant extragalactic sources using radio telescopes. The Gaia mission will be presented in the context of stellar physics and galactic structure, because this key space mission in astronomy will bring a breakthrough in our understanding of stars, galaxies and the Universe in their nature and evolution with time. Measuring the distance to a star is the starting point for an unbiased description of its physics and the estimate of its fundamental parameters like its age. Applying these studies to candles such as the Cepheids will impact our large distance studies and calibration of other candles. The text is constructed as follows: introducing the parallax concept and measurement, we shall present briefly the Gaia satellite which will be the future base catalogue of stellar astronomy in the near future. Cepheids will be discussed just after to demonstrate the state of the art in distance measurements in the Universe with these variable stars, with the objective of 1% of error in distances that could be applied to our closest

Trends and Issues in Distance Education: International Perspectives

Directory of Open Access Journals (Sweden)

Erhan EROGLU

2006-04-01

Full Text Available Trends and Issues in Distance Education: International Perspectives Edited by Yusra Laila Visser, Lya Visser, Michael Simonsın, & Ray Amirault, 2005, United States of America: Information Age Publishing, Inc. pp. 315. ISBN 1-59311-212-2 Reviewed by Dr. Erhan EROGLU Anadolu University Eskisehir, TURKEY In this book, the terms of “distance education” has been discussed from different perspectives. The term “distance education” conjures up in many minds the image of modern, computer-enabled technology that has blossomed in only the last twenty years. Many of the lessons learned over the last century of distance education research and practice have been implemented in a wide variety of distance education programs worldwide, from higher education online learning programs in the United States to rural, radio-based instructional programs in developing countries. Distance education is truly international discipline. While it is true that the term “distance education” has a universal definiton, local distance ducation experiences are often quite idiosyncratic. This idiosyncratic nature emerges from the need to integrate distance education within the constraints, oppurtunities, and realities of spesific cultural and geographic contexts. From these local distance education experiences, educators are developing new understandings of the broader field of distance education, including the trends and issues present in the field. ORGANIZATION OF THE SECTIONS This book has been organized by thematic content into four main sections. Each of these sections represents a unique level of analysis for trends and issues in distance education. Part I presents five distinct perspectives on the state of distance education and the trends and issues of the field. First perspective of five distinct perpectives is “a survey of progressive and conservative trends in education with implications for distance education practice.” Second perspective is �

Structure of Ag, Fe and Ge microclusters

International Nuclear Information System (INIS)

Montano, P.A.; Shenoy, G.K.; Schulze, W.

1989-01-01

The structures of Ag, Fe and Ge microclusters were determined using EXAFS. The measurements were performed over a wide range of clusters sizes. The clusters were prepared using the gas aggregation technique and isolated in solid argon at 4.2 K. The measurements were performed at the National Synchrotron Light Source (NSLS) at beam line X-18B. A strong contraction of the interatomic distances was observed for Ag dimers and multimers. Silver clusters larger than 12 A mean diameter show a small contraction of the nn distance and a structure consistent with an fcc lattice. By contrast clusters smaller than 12 A show the presence of a small expansion and a strong reduction or absence of nnn in the EXAFS signal. This points towards a different crystallographic structure for Ag microclusters with diameter less than 12 A. In iron clusters we observe a gradual reduction of the nn distance as the cluster size decreases. The interatomic distance for iron dimers was determined to be 1.94 A, in good agreement with earlier measurements. The iron microclusters show a bcc structure down to a mean diameter of 9 A. Iron clusters with 9 A mean diameter show a structure inconsistent with a bcc lattice. The new structure is consistent with an fcc or hcp lattice. The measurements on Ge clusters show the presence of only nearest neighbors. There was clear evidence of temporal annealing as determined by variations in the near edge structure of the K-absorption edge. Absorption edge measurements were also performed for free Ge clusters travelling perpendicular to the direction of the synchrotron radiation beam. The measurements performed on the free clusters were consistent with those obtained for matrix isolated clusters. (orig.)

Measuring and testing dependence by correlation of distances

OpenAIRE

Székely, Gábor J.; Rizzo, Maria L.; Bakirov, Nail K.

2007-01-01

Distance correlation is a new measure of dependence between random vectors. Distance covariance and distance correlation are analogous to product-moment covariance and correlation, but unlike the classical definition of correlation, distance correlation is zero only if the random vectors are independent. The empirical distance dependence measures are based on certain Euclidean distances between sample elements rather than sample moments, yet have a compact representation analogous to the clas...

Ethnical distance in Vojvodina: Research results

Directory of Open Access Journals (Sweden)

Lazar Žolt

2005-01-01

Full Text Available This article presents the results of the ethnical distance measuring in Vojvodina, the north Province of the Republic of Serbia. The measuring was carried out on autumn 2002, during realization of the wider project of multiculturalism research in the mentioned region. According to the results the ethnical distances in Vojvodina are quite equalized and they are grouped around the attitude "all the same". Vojvodinian Serbs are more favorable partners for the majority of social contacts, and the relatively largest distance is shown toward Roma. The ethnical distance results also discovers two very important factors for understanding the interethnic relations in Vojvodina: first, the "rational" kind of social contacts with the members of the other ethnical groups are more preferable for the majority of respondents, and second, they have very equal distances toward their own ethnical groups.

Three Generations of Distance Education Pedagogy

Directory of Open Access Journals (Sweden)

Terry Anderson

2011-03-01

Full Text Available This paper defines and examines three generations of distance education pedagogy. Unlike earlier classifications of distance education based on the technology used, this analysis focuses on the pedagogy that defines the learning experiences encapsulated in the learning design. The three generations of cognitive-behaviourist, social constructivist, and connectivist pedagogy are examined, using the familiar community of inquiry model (Garrison, Anderson, & Archer, 2000 with its focus on social, cognitive, and teaching presences. Although this typology of pedagogies could also be usefully applied to campus-based education, the need for and practice of openness and explicitness in distance education content and process makes the work especially relevant to distance education designers, teachers, and developers. The article concludes that high-quality distance education exploits all three generations as determined by the learning content, context, and learning expectations.

Social Distance and Intergenerational Relations

Science.gov (United States)

Kidwell, I. Jane; Booth, Alan

1977-01-01

Questionnaires were administered to a sample of adults to assess the extent of social distance between people of different ages. The findings suggest that the greater the age difference (younger or older) between people, the greater the social distance they feel. (Author)

The Psychology of Psychic Distance

DEFF Research Database (Denmark)

Håkanson, Lars; Ambos, Björn; Schuster, Anja

2016-01-01

and their theoretical underpinnings assume psychic distances to be symmetric. Building on insights from psychology and sociology, this paper demonstrates how national factors and cognitive processes interact in the formation of asymmetric distance perceptions. The results suggest that exposure to other countries...

Cognitive Styles and Distance Education.

Science.gov (United States)

Liu, Yuliang; Ginther, Dean

1999-01-01

Considers how to adapt the design of distance education to students' cognitive styles. Discusses cognitive styles, including field dependence versus independence, holistic-analytic, sensory preference, hemispheric preferences, and Kolb's Learning Style Model; and the characteristics of distance education, including technology. (Contains 92…

Application of Powder Diffraction Methods to the Analysis of Short- and Long-Range Atomic Order in Nanocrystalline Diamond and SiC: The Concept of the Apparent Lattice Parameter (alp)

Science.gov (United States)

Palosz, B.; Grzanka, E.; Gierlotka, S.; Stelmakh, S.; Pielaszek, R.; Bismayer, U.; Weber, H.-P.; Palosz, W.

2003-01-01

Two methods of the analysis of powder diffraction patterns of diamond and SiC nanocrystals are presented: (a) examination of changes of the lattice parameters with diffraction vector Q ('apparent lattice parameter', alp) which refers to Bragg scattering, and (b), examination of changes of inter-atomic distances based on the analysis of the atomic Pair Distribution Function, PDF. Application of these methods was studied based on the theoretical diffraction patterns computed for models of nanocrystals having (i) a perfect crystal lattice, and (ii), a core-shell structure, i.e. constituting a two-phase system. The models are defined by the lattice parameter of the grain core, thickness of the surface shell, and the magnitude and distribution of the strain field in the shell. X-ray and neutron experimental diffraction data of nanocrystalline SiC and diamond powders of the grain diameter from 4 nm up to micrometers were used. The effects of the internal pressure and strain at the grain surface on the structure are discussed based on the experimentally determined dependence of the alp values on the Q-vector, and changes of the interatomic distances with the grain size determined experimentally by the atomic Pair Distribution Function (PDF) analysis. The experimental results lend a strong support to the concept of a two-phase, core and the surface shell structure of nanocrystalline diamond and SiC.

Robustness of Distance-to-Default

DEFF Research Database (Denmark)

Jessen, Cathrine; Lando, David

2013-01-01

. A notable exception is a model with stochastic volatility of assets. In this case both the ranking of firms and the estimated default probabilities using distance-to-default perform significantly worse. We therefore propose a volatility adjustment of the distance-to-default measure, that significantly...

Distance criterion for hydrogen bond

Indian Academy of Sciences (India)

First page Back Continue Last page Overview Graphics. Distance criterion for hydrogen bond. In a D-H ...A contact, the D...A distance must be less than the sum of van der Waals Radii of the D and A atoms, for it to be a hydrogen bond.

Distance Learning: Practice and Dilemmas

Science.gov (United States)

Tatkovic, Nevenka; Sehanovic, Jusuf; Ruzic, Maja

2006-01-01

In accordance with the European processes of integrated and homogeneous education, the paper presents the essential viewpoints and questions covering the establishment and development of "distance learning" (DL) in Republic of Croatia. It starts from the advantages of distance learning versus traditional education taking into account…

Long distance travel ‘today’

DEFF Research Database (Denmark)

Christensen, Linda

2014-01-01

This paper presents an overview of the Dane’s long distance travel. It is a part of the Drivers and Limits project about long distance travel. Long distance travel is in the project defined as infrequent travel with overnight stay. Danes 15-85 years-old travel in average 5.5 long distance travel...... per year og which a third is for international destinations, a third is for domestic second homes and a third are other domestic trips. However, 87% of the kilometres are for international destinations and only 4% are for domestic second homes. Travel activity is very uneven distributed with only half...... of the population having had a journey during the last three month. At the other hand 60% have travelled internationally during the last year and only 2% have never travelled abroad. The paper presents among other things how the travel activity is distributed on travel purpose and mode and how the mode choice...

Does Distance to Subsidiaries affect Headquarters Value Added?

DEFF Research Database (Denmark)

Nell, Phillip C.; Beugelsdijk, Sjoerd; Ambos, Björn

2014-01-01

How does distance between MNC headquarters and their subsidiaries affect the value added generated by headquarters? Integrating theories on spatial transaction costs with the headquarter view of the MNC, we link two types of distances, geographic distance and contextual distance, with headquarters...... value added. We test our hypotheses on an original dataset of 124 manufacturing subsidiaries in Europe. We find that the relation between distance and headquarters value added is conditional on the degree of subsidiaries’ external embeddedness. We find no direct effect of distance. The value added...... of headquarters is highest for subsidiaries that are not externally embedded in the host country and that operate at a large distance. It is lowest for locally responsive subsidiaries with high external embeddedness operating at a large distance. We discuss implications for the literature on headquarters-subsidiaries...

GLOBALIZATION, DISTANCE EDUCATION AND HEGEMONIC FUTURES

Directory of Open Access Journals (Sweden)

Glenn RUSSELL

2007-10-01

Full Text Available ABSTRACT Consideration of the place of theory in distance education suggests that existing definitions do not adequately account for economic, cultural and historical factors. The application of the notion of hegemonic valency to distance education highlights the ways in which tools, technological systems and online environments operate in predictable ways. Historically, the imperatives of market forces and social justice have displayed a tension that is continued in contemporary contexts including virtual learning environments. A characteristic of this tension can be seen in the forces and interactions associated with globalisation and technology. These forces, in association with others, have contributed to a null curriculum in which some alternatives open to distance education practitioners remain invisible. It is likely that this situation is further compounded by the difficulty of ascertaining what distance education practices are actually operating world-wide at any identifiable time. Available options for distance educators can be understood in terms of instrumental and interpersonal axes that can potentially indicate the relative consideration that can be given to these factors. This approach is suggested as one way to understand available options at a time when there has been an apparent increase in instrumental approaches to distance education at the expense of interpersonal approaches and issues of social justice. While this problem is of concern, it is more appropriate to reflect on the unintended consequences of distance education for society and identify them than it is to uncritically oppose globalisation and its adherents.

The facility location problem for hyper-rectilinear distances

DEFF Research Database (Denmark)

Juel, Henrik; Love, Robert F.

1985-01-01

Hyper-rectilinear distances correspond to the l p distance function for 0 travel distances between pairs of points are generally greater than rectilinear distances. In this paper we examine the single facility location problem when hyper...

Auditory/visual distance estimation: accuracy and variability

Directory of Open Access Journals (Sweden)

Paul Wallace Anderson

2014-10-01

Full Text Available Past research has shown that auditory distance estimation improves when listeners are given the opportunity to see all possible sound sources when compared to no visual input. It has also been established that distance estimation is more accurate in vision than in audition. The present study investigates the degree to which auditory distance estimation is improved when matched with a congruent visual stimulus. Virtual sound sources based on binaural room impulse response (BRIR measurements made from distances ranging from approximately 0.3 to 9.8 m in a concert hall were used as auditory stimuli. Visual stimuli were photographs taken from the listener’s perspective at each distance in the impulse response measurement setup presented on a large HDTV monitor. Listeners were asked to estimate egocentric distance to the sound source in each of three conditions: auditory only (A, visual only (V, and congruent auditory/visual stimuli (A+V. Each condition was presented within its own block. Sixty-two listeners were tested in order to quantify the response variability inherent in auditory distance perception. Distance estimates from both the V and A+V conditions were found to be considerably more accurate and less variable than estimates from the A condition.

Einstein at a distance

Energy Technology Data Exchange (ETDEWEB)

Lambourne, Robert [Department of Physics and Astronomy, Open University, Milton Keynes (United Kingdom)

2005-11-01

This paper examines the challenges and rewards that can arise when the teaching of Einsteinian physics has to be accomplished by means of distance education. The discussion is mainly based on experiences gathered over the past 35 years at the UK Open University, where special and general relativity, relativistic cosmology and other aspects of Einsteinian physics, have been taught at a variety of levels, and using a range of techniques, to students studying at a distance.

Long distance quantum teleportation

Science.gov (United States)

Xia, Xiu-Xiu; Sun, Qi-Chao; Zhang, Qiang; Pan, Jian-Wei

2018-01-01

Quantum teleportation is a core protocol in quantum information science. Besides revealing the fascinating feature of quantum entanglement, quantum teleportation provides an ultimate way to distribute quantum state over extremely long distance, which is crucial for global quantum communication and future quantum networks. In this review, we focus on the long distance quantum teleportation experiments, especially those employing photonic qubits. From the viewpoint of real-world application, both the technical advantages and disadvantages of these experiments are discussed.

Diffusion in flowing gas

International Nuclear Information System (INIS)

Reus, K.W.

1979-01-01

This thesis is concerned with the back-diffusion method of calculating the mutual diffusion coefficient of two gases. The applicability of this method for measuring diffusion coefficients at temperatures up to 1300 K is considered. A further aim of the work was to make a contribution to the description of the interatomic potential energy of noble gases at higher energies as a function of the internuclear distance. This was achieved with the measured diffusion coefficients, especially with those for high temperatures. (Auth.)

A simple electron multiplexer

International Nuclear Information System (INIS)

Dobrzynski, L; Akjouj, A; Djafari-Rouhani, B; Al-Wahsh, H; Zielinski, P

2003-01-01

We present a simple multiplexing device made of two atomic chains coupled by two other transition metal atoms. We show that this simple atomic device can transfer electrons at a given energy from one wire to the other, leaving all other electron states unaffected. Closed-form relations between the transmission coefficients and the inter-atomic distances are given to optimize the desired directional electron ejection. Such devices can be adsorbed on insulating substrates and characterized by current surface technologies. (letter to the editor)

Long distance signaling using axionlike particles

International Nuclear Information System (INIS)

Stancil, Daniel D.

2007-01-01

The possible existence of axionlike particles could lead to a new type of long-distance communication. In this work, basic antenna concepts are defined and a Friis-like equation is derived to facilitate long-distance link calculations. An example calculation is presented showing that communication over distances of 1000 km or more may be possible for m a aγγ >5x10 -8 GeV -1

Cardiovascular Risks in Long Distance Runners.

Science.gov (United States)

Witham, Bethany Rolfe; Babbitt, Keven

Distance running has become increasingly popular since the 1970s. Despite the health benefits, long-distance running has been associated with an increased risk for cardiac events. Healthcare professionals should be familiar with distance running cardiac risk factors and preparticipation screening recommendations from the American Heart Association, and should screen and educate patients during healthcare encounters. Nurses are particularly well suited to educate runners on risks and symptoms of cardiac dysfunction.

Continuity Properties of Distances for Markov Processes

DEFF Research Database (Denmark)

Jaeger, Manfred; Mao, Hua; Larsen, Kim Guldstrand

2014-01-01

In this paper we investigate distance functions on finite state Markov processes that measure the behavioural similarity of non-bisimilar processes. We consider both probabilistic bisimilarity metrics, and trace-based distances derived from standard Lp and Kullback-Leibler distances. Two desirable...

Virtual Bioinformatics Distance Learning Suite

Science.gov (United States)

Tolvanen, Martti; Vihinen, Mauno

2004-01-01

Distance learning as a computer-aided concept allows students to take courses from anywhere at any time. In bioinformatics, computers are needed to collect, store, process, and analyze massive amounts of biological and biomedical data. We have applied the concept of distance learning in virtual bioinformatics to provide university course material…

Quality Content in Distance Education

Science.gov (United States)

Yildiz, Ezgi Pelin; Isman, Aytekin

2016-01-01

In parallel with technological advances in today's world of education activities can be conducted without the constraints of time and space. One of the most important of these activities is distance education. The success of the distance education is possible with content quality. The proliferation of e-learning environment has brought a need for…

Distance between images

Science.gov (United States)

Gualtieri, J. A.; Le Moigne, J.; Packer, C. V.

1992-01-01

Comparing two binary images and assigning a quantitative measure to this comparison finds its purpose in such tasks as image recognition, image compression, and image browsing. This quantitative measurement may be computed by utilizing the Hausdorff distance of the images represented as two-dimensional point sets. In this paper, we review two algorithms that have been proposed to compute this distance, and we present a parallel implementation of one of them on the MasPar parallel processor. We study their complexity and the results obtained by these algorithms for two different types of images: a set of displaced pairs of images of Gaussian densities, and a comparison of a Canny edge image with several edge images from a hierarchical region growing code.

VIRTUAL LABORATORY IN DISTANCE LEARNING SYSTEM

Directory of Open Access Journals (Sweden)

Е. Kozlovsky

2011-11-01

Full Text Available Questions of designing and a choice of technologies of creation of virtual laboratory for the distance learning system are considered. Distance learning system «Kherson Virtual University» is used as illustration.

Distance Education at Conventional Universities in Germany

Directory of Open Access Journals (Sweden)

Hans-Henning Kappel

2002-01-01

Full Text Available Germany’s educational system has undergone a series of transformations during the last 40 years. In recent years, marked increases in enrolment have occurred. In response, admission requirements have been relaxed and new universities have been established.Academic distance education in the former Federal Republic of Germany (West Germany was ushered in by the educational radio broadcasts around the end of the 1960s. Aside from the formation of the FernUniversität (Open University in West Germany in 1975, there were significant developments in distance education occurring at the major universities in the German Democratic Republic (East Germany. After German reunification in 1990, the new unitary state launched programs to advance the development of distance education programs at conventional universities.Germany’s campus-based universities (Präsenzuniversitäten created various entities, including central units and consortia of universities to design and market distance education programs. Hybridisation provides the necessary prerequisites for dual mode delivery, such as basic and continuing education programs, as well as for the combination of distance and campus-based education (Präsenzstudium. Hybridisation also has also opened the door for the creation of new programs.Following an initial phase in which distance education research is expected to centralize a trend towards decentralisation is likely to follow. The German Association for Distance Education (AG-F offers a viable research network in distance education. Two dual mode case studies are also be surveyed: The Master of Arts degree, offered by the University of Koblenz-Landau, with Library Science as the second major, and the University of Kaiserslautern, where basic education will continue to be captured within the domain of the Präsenzstudium or campus-based education.The area in which distance education is flourishing most is within the field of academic continuing

Geodesic distance in planar graphs

International Nuclear Information System (INIS)

Bouttier, J.; Di Francesco, P.; Guitter, E.

2003-01-01

We derive the exact generating function for planar maps (genus zero fatgraphs) with vertices of arbitrary even valence and with two marked points at a fixed geodesic distance. This is done in a purely combinatorial way based on a bijection with decorated trees, leading to a recursion relation on the geodesic distance. The latter is solved exactly in terms of discrete soliton-like expressions, suggesting an underlying integrable structure. We extract from this solution the fractal dimensions at the various (multi)-critical points, as well as the precise scaling forms of the continuum two-point functions and the probability distributions for the geodesic distance in (multi)-critical random surfaces. The two-point functions are shown to obey differential equations involving the residues of the KdV hierarchy

Distance Training in the European Union. ZIFF Papiere 96.

Science.gov (United States)

Keegan, Desmond

A study examined distance training in the European Union (EU) countries. First, recent literature on the following topics was reviewed: technology-supported learning, flexible and distance learning, development of open distance learning, and teleconferencing and distance learning. Next, enrollments and trends in distance learning in the EU as a…

Sensor Network Localization with Imprecise Distances

NARCIS (Netherlands)

Cao, M.; Morse, A.S.; Anderson, B.D.O.

2006-01-01

An approach to formulate geometric relations among distances between nodes as equality constraints is introduced in this paper to study the localization problem with imprecise distance information in sensor networks. These constraints can be further used to formulate optimization problems for

Distance Learning: Are We Being Realistic?

Science.gov (United States)

Oblinger, Diana; Kidwell, Jill

2000-01-01

Presents conceptual frameworks for discussing distance education. Considers the networked environment; the higher education market; rationales for distance education, including expanding access to educational and training needs; learner segments, including lifelong learners and professional development; indicators of institutional readiness;…

Institutional Distance and the Internationalization Process

DEFF Research Database (Denmark)

Pogrebnyakov, Nicolai; Maitland, Carleen

2011-01-01

This paper applies the institutional lens to the internationalization process model. It updates the concept of psychic distance in the model with a recently developed, theoretically grounded construct of institutional distance. Institutions are considered simultaneously at the national and industry...

Study of local response effects in interatomic collisions with two active electrons in the framework of time-dependent density functional theory; Untersuchung lokaler Responseffekte in interatomaren Stoessen mit zwei aktiven Elektronen im Rahmen zeitabhaengiger Dichtefunktionaltheorie

Energy Technology Data Exchange (ETDEWEB)

Keim, M.

2005-07-01

In the present thesis response effects in interatomic collisions with two active electrons are studied in the range of non-relativistic collision energies. The starting point is the mapping of the time-dependent interacting many-electron sytem on an effective one-particle picture on the base of the time-dependent density functional theory (TDDFT). By means of the basis generator method the one-particle equations aring in the framework of the TDDFT concept are solved in a finite-dimensional model space. In the study of ionization cross section in the collisional systeem anti p+He it is shown that by response effects an essential diminuishing of the cross sections in comparison to the no-response case is reached. Analoguously the ionization cross sections for the collisional systems p-He, He{sup 2+}-He, Li{sup 3+}-He and p-Li{sup +} behave.

DISTANCE LEARNING AND ATTITUDES OF GREEK BASKETBALL COACHES

Directory of Open Access Journals (Sweden)

E. Tsamourtzis

2009-01-01

Full Text Available Aim of the present research was the determination of the attitudes of Greek Basketball coaches towards their distance learning with the use of ICT in comparison with the classical learning and the examination of the perspective of their distance learning with the use of ICT. Therefore a closed questionnaire was used which included 3 different parts. 60 basketball coaches from Northern Greece comprised the sample (N=60. An interactive software was created which included the teaching of an offensive basketball system. The methodology of distance learning was used for the creation of the offensive system. The software was copied to a CD-Rom and accompanied with the questionnaires it was given to 20 Basketball coaches of Northern Greece as a pilot program. After the corrections of the primary questionnaires, the distribution of the final questionnaire accompanied with the CD-Rom followed. Multiple reciprocations were used for the data analysis. According to the results the more relaxing, easier and faster distance learning was considered in relation to the conventional one, a the fewer difficulties would the Basketball coaches face by using the distance learning method and b the friendlier and more relaxing would the distance learning method be. Also according to data research: a the more attractive the reading of software was, b the fewer the difficulties during the reading of software and c the more relaxing, easier and faster distance learning was considered in relation to the conventional one, the stronger was the perspective of Basketball coaches to believe in distance learning. In conclusion the more relaxing, easier and faster distance learning was considered in relation to the conventional one, the more positive were the attitudes of Basketball coaches towards their distance learning, while a positive perspective of Basketball coaches towards their distance learning is being formed.

Distance Teaching on Bornholm

DEFF Research Database (Denmark)

Hansen, Finn J. S.; Clausen, Christian

2001-01-01

The case study represents an example of a top-down introduction of distance teaching as part of Danish trials with the introduction of multimedia in education. The study is concerned with the background, aim and context of the trial as well as the role and working of the technology and the organi......The case study represents an example of a top-down introduction of distance teaching as part of Danish trials with the introduction of multimedia in education. The study is concerned with the background, aim and context of the trial as well as the role and working of the technology...

A CONCEPTUAL MODEL FOR EFFECTIVE DISTANCE LEARNING IN HIGHER A CONCEPTUAL MODEL FOR EFFECTIVE DISTANCE LEARNING IN HIGHER A CONCEPTUAL MODEL FOR EFFECTIVE DISTANCE LEARNING IN HIGHER EDUCATION

Directory of Open Access Journals (Sweden)

Mehran FARAJOLLAHI

2010-07-01

Full Text Available The present research aims at presenting a conceptual model for effective distance learning in higher education. Findings of this research shows that an understanding of the technological capabilities and learning theories especially constructive theory and independent learning theory and communicative and interaction theory in Distance learning is an efficient factor in the planning of effective Distance learning in higher education. Considering the theoretical foundations of the present research, in the effective distance learning model, the learner is situated at the center of learning environment. For this purpose, the learner needs to be ready for successful learning and the teacher has to be ready to design the teaching- learning activities when they initially enter the environment. In the present model, group and individual active teaching-learning approach, timely feedback, using IT and eight types of interactions have been designed with respect to theoretical foundations and current university missions. From among the issues emphasized in this model, one can refer to the Initial, Formative and Summative evaluations. In an effective distance learning environment, evaluation should be part of the learning process and the feedback resulting from it should be used to improve learning. For validating the specified features, the opinions of Distance learning experts in Payame Noor, Shiraz, Science and Technology and Amirkabir Universities have been used which verified a high percentage of the statistical sample of the above mentioned features.

Distance Learning Delivery Systems: Instructional Options.

Science.gov (United States)

Steele, Ray L.

1993-01-01

Discusses the availability of satellite and cable programing to provide distance education opportunities in school districts. Various delivery systems are described, including telephones with speakers, personal computers, and satellite dishes; and a sidebar provides a directory of distance learning opportunities, including telecommunications…

So, What is Actually the Distance from the Equator to the Pole? – Overview of the Meridian Distance Approximations

Directory of Open Access Journals (Sweden)

Adam Weintrit

2013-06-01

Full Text Available In the paper the author presents overview of the meridian distance approximations. He would like to find the answer for the question what is actually the distance from the equator to the pole - the polar distance. In spite of appearances this is not such a simple question. The problem of determining the polar distance is a great opportunity to demonstrate the multitude of possible solutions in common use. At the beginning of the paper the author discusses some approximations and a few exact expressions (infinite sums to calculate perimeter and quadrant of an ellipse, he presents convenient measurement units of the distance on the surface of the Earth, existing methods for the solution of the great circle and great elliptic sailing, and in the end he analyses and compares geodetic formulas for the meridian arc length.

Method of measuring distance between fuel element

International Nuclear Information System (INIS)

Urata, Megumu.

1991-01-01

The distance between fuel elements contained in a pool is measured in a contactless manner even for a narrow distance less than 1 mm. That is, the equipment for measuring the distance between spent fuel elements of a spent fuel assembly in a nuclear reactor comprises a optical fiber scope, a lens, an industrial TV camera and a monitor TV. The top end of the optical fiber scope is inserted between fuel elements to be measured. The state thereof is displayed on the TV screen to measure the distance between the fuel elements. The measured results are compared with a previously formed calibration curve to determine the value between the fuel elements. Then, the distance between the fuel elements can be determined in the pool of a power plant without dismantling the fuel assembly, to investigate the state of the bending and estimate the fuel working life. (I.S.)

Is Distance Education a Faustian Bargain?

Science.gov (United States)

DiBiase, David

2000-01-01

Focuses on the morality of distance education in geography. States that distance education learners are a qualitatively different, older population with educational needs separate from traditional on-campus students. Argues that geography educators have a moral obligation to serve lifelong learners. Includes references. (CMK)

Can you go the distance? Attending the virtual classroom.

Science.gov (United States)

Bigony, Lorraine

2010-01-01

Distance learning via the World Wide Web offers convenience and flexibility. Online education connects nurses geographically in a manner that the traditional face-to-face learning environment lacks. Delivered in both a synchronous (real time interaction) or asynchronous (delayed interaction) format, distance programs continue to provide nurses with choice, especially in the pursuit of advanced degrees. This article explores the pros and cons of distance education, in addition to the most popular platform used in distance learning today, the Blackboard Academic Suite. Characteristics of the potential enrollee to ensure a successful distance education experience are also discussed. Distance nursing programs are here to stay. Although rigorous, the ease of accessibility makes distance learning a viable alternative for busy nurses.

Connecting in distance mentoring: communication practices that work.

Science.gov (United States)

Lasater, Kathie; Young, Patricia K; Mitchell, Claudia G; Delahoyde, Theresa M; Nick, Jan M; Siktberg, Linda

2014-04-01

As nursing and healthcare become more global, supported by technology, the opportunities for distance mentoring increase. Mentorship is critical to nurse educator recruitment and retention. The purpose of this study was to identify communication practices of nurse educators involved in mentoring at a distance. A qualitative design, utilizing in-person or telephone interviews was used. Participants were twenty-three protégés or mentors who were part of a yearlong distance mentoring program. An iterative process of hermeneutic analysis identified three themes; this paper focuses on the theme of connectedness. Participant narratives illuminate practices of connecting at a distance: meeting face-to-face, sharing personal information, experiencing reciprocity, journaling, being vulnerable, establishing one's presence, and appreciating different perspectives. Distance does not appear to limit the connecting potential leading to a meaningful mentoring relationship; rather, it offers possibilities that local mentoring relationships may not. Nurse educators in under-resourced countries, those in small programs without a cadre of senior faculty, and students in distance programs are among those who stand to benefit from distance mentoring relationships. © 2013.

Costs of Low-Scale Distance Learning Programs: A Case of Distance Learning Courses in the Aegean Islands.

Directory of Open Access Journals (Sweden)

Costas Tsolakidis

2010-03-01

Full Text Available The advance of Information and Communication Technology (ICT and the reduction of cost in digital applications motivate course designers to develop new application of distance learning programs so as to meet the increasing educational needs in the knowledge-based society. As a consequence, distance learning courses are increasing in number, credibility and acceptability all over the world. The question is whether these programs are efficient in terms of costs. The main theme of this work is to investigate cost behaviour and estimate cost efficiency of distance learning courses applied in low-inhabited, remote islands. The target group consists of high school students of Grade I. The distance learning course that is designed uses several scenarios of the “what-if form” and reaches the conclusion that cost of such solutions is far lower than that of any traditional course, even at the absence of scale economies.

[Osteoarthritis from long-distance running?].

Science.gov (United States)

Hohmann, E; Wörtler, K; Imhoff, A

2005-06-01

Long distance running has become a fashionable recreational activity. This study investigated the effects of external impact loading on bone and cartilage introduced by performing a marathon race. Seven beginners were compared to six experienced recreational long distance runners and two professional athletes. All participants underwent magnetic resonance imaging of the hip and knee before and after a marathon run. Coronal T1 weighted and STIR sequences were used. The pre MRI served as a baseline investigation and monitored the training effect. All athletes demonstrated normal findings in the pre run scan. All but one athlete in the beginner group demonstrated joint effusions after the race. The experienced and professional runners failed to demonstrate pathology in the post run scans. Recreational and professional long distance runners tolerate high impact forces well. Beginners demonstrate significant changes on the post run scans. Whether those findings are a result of inadequate training (miles and duration) warrant further studies. We conclude that adequate endurance training results in adaptation mechanisms that allow the athlete to compensate for the stresses introduced by long distance running and do not predispose to the onset of osteoarthritis. Significant malalignment of the lower extremity may cause increased focal loading of joint and cartilage.

Scattering of thermal He beams by crossed atomic and molecular beams. II. The He--Ar van der Waals potential

International Nuclear Information System (INIS)

Keilb, M.; Slankas, J.T.; Kuppermann, A.

1979-01-01

Differential cross sections for He--Ar scattering at room temperature have been measured. The experimental consistency of these measurements with others performed in different laboratories is demonstrated. Despite this consistency, the present van der Waals well depth of 1.78 meV, accurate to 10%, is smaller by 20% to 50% than the experimental values obtained previously. These discrepancies are caused by differences between the assumed mathematical forms or between the assumed dispersion coefficients of the potentials used in the present paper and those of previous studies. Independent investigations have shown that the previous assumptions are inappropriate for providing accurate potentials from fits to experimental differential cross section data for He--Ar. We use two forms free of this inadequacy in the present analysis: a modified version of the Simons--Parr--Finlan--Dunham (SPFD) potential, and a double Morse--van der Waals (M 2 SV) type of parameterization. The resulting He--Ar potentials are shown to be equal to with experimental error, throughout the range of interatomic distances to which the scattering data are sensitive. The SPFD or M 2 SV potentials are combined with a repulsive potential previously determined exclusively from fits to gas phase bulk properties. The resulting potentials, valid over the extended range of interatomic distances r> or approx. =2.4 A, are able to reproduce all these bulk properties quite well, without adversely affecting the quality of the fits to the DCS

Euclidean distance geometry an introduction

CERN Document Server

Liberti, Leo

2017-01-01

This textbook, the first of its kind, presents the fundamentals of distance geometry:  theory, useful methodologies for obtaining solutions, and real world applications. Concise proofs are given and step-by-step algorithms for solving fundamental problems efficiently and precisely are presented in Mathematica®, enabling the reader to experiment with concepts and methods as they are introduced. Descriptive graphics, examples, and problems, accompany the real gems of the text, namely the applications in visualization of graphs, localization of sensor networks, protein conformation from distance data, clock synchronization protocols, robotics, and control of unmanned underwater vehicles, to name several.  Aimed at intermediate undergraduates, beginning graduate students, researchers, and practitioners, the reader with a basic knowledge of linear algebra will gain an understanding of the basic theories of distance geometry and why they work in real life.

Measuring short distance dispersal of Alliaria petiolata and determining potential long distance dispersal mechanisms

Directory of Open Access Journals (Sweden)

Christopher A. Loebach

2018-03-01

Full Text Available Introduction Alliaria petiolata, an herbaceous plant, has invaded woodlands in North America. Its ecology has been thoroughly studied, but an overlooked aspect of its biology is seed dispersal distances and mechanisms. We measured seed dispersal distances in the field and tested if epizoochory is a potential mechanism for long-distance seed dispersal. Methods Dispersal distances were measured by placing seed traps in a sector design around three seed point sources, which consisted of 15 second-year plants transplanted within a 0.25 m radius circle. Traps were placed at intervals ranging from 0.25–3.25 m from the point source. Traps remained in the field until a majority of seeds were dispersed. Eight probability density functions were fitted to seed trap counts via maximum likelihood. Epizoochory was tested as a potential seed dispersal mechanism for A. petiolata through a combination of field and laboratory experiments. To test if small mammals transport A. petiolata seeds in their fur, experimental blocks were placed around dense A. petiolata patches. Each block contained a mammal inclusion treatment (MIT and control. The MIT consisted of a wood-frame (31 × 61× 31 cm covered in wire mesh, except for the two 31 × 31 cm ends, placed over a germination tray filled with potting soil. A pan filled with bait was placed in the center of the tray. The control frame (11 × 31 × 61 cm was placed over a germination tray and completely covered in wire mesh to exclude animal activity. Treatments were in the field for peak seed dispersal. In March, trays were moved to a greenhouse and A. petiolata seedlings were counted and then compared between treatments. To determine if A. petiolata seeds attach to raccoon (Procyon lotor and white-tailed deer (Odocoileus virginianus fur, wet and dry seeds were dropped onto wet and dry fur. Furs were rotated 180 degrees and the seeds that remained attached were counted. To measure seed retention, seeds

Three Generations of Distance Education Pedagogy

Science.gov (United States)

Anderson, Terry; Dron, Jon

2011-01-01

This paper defines and examines three generations of distance education pedagogy. Unlike earlier classifications of distance education based on the technology used, this analysis focuses on the pedagogy that defines the learning experiences encapsulated in the learning design. The three generations of cognitive-behaviourist, social constructivist,…

Handwriting individualization using distance and rarity

Science.gov (United States)

Tang, Yi; Srihari, Sargur; Srinivasan, Harish

2012-01-01

Forensic individualization is the task of associating observed evidence with a specific source. The likelihood ratio (LR) is a quantitative measure that expresses the degree of uncertainty in individualization, where the numerator represents the likelihood that the evidence corresponds to the known and the denominator the likelihood that it does not correspond to the known. Since the number of parameters needed to compute the LR is exponential with the number of feature measurements, a commonly used simplification is the use of likelihoods based on distance (or similarity) given the two alternative hypotheses. This paper proposes an intermediate method which decomposes the LR as the product of two factors, one based on distance and the other on rarity. It was evaluated using a data set of handwriting samples, by determining whether two writing samples were written by the same/different writer(s). The accuracy of the distance and rarity method, as measured by error rates, is significantly better than the distance method.

Electromagnetic distance measurement

CERN Document Server

1967-01-01

This book brings together the work of forty-eight geodesists from twenty-five countries. They discuss various new electromagnetic distance measurement (EDM) instruments - among them the Tellurometer, Geodimeter, and air- and satellite-borne systems - and investigate the complex sources of error.

Distance Education in Technological Age

OpenAIRE

R .C. SHARMA

2005-01-01

Distance Education in Technological AgeRomesh Verma (Editor), New Delhi: Anmol Publications, 2005, ISBN 81-261-2210-2, pp. 419 Reviewed by R C SHARMARegional DirectorIndira Gandhi National Open University-INDIA The advancements in information and communication technologies have brought significant changes in the way the open and distance learning are provided to the learners. The impact of such changes is quite visible in both developed and developing countries. Switching over to online mode...

Reliability of reference distances used in photogrammetry.

Science.gov (United States)

Aksu, Muge; Kaya, Demet; Kocadereli, Ilken

2010-07-01

To determine the reliability of the reference distances used for photogrammetric assessment. The sample consisted of 100 subjects with mean ages of 22.97 +/- 2.98 years. Five lateral and four frontal parameters were measured directly on the subjects' faces. For photogrammetric assessment, two reference distances for the profile view and three reference distances for the frontal view were established. Standardized photographs were taken and all the parameters that had been measured directly on the face were measured on the photographs. The reliability of the reference distances was checked by comparing direct and indirect values of the parameters obtained from the subjects' faces and photographs. Repeated measure analysis of variance (ANOVA) and Bland-Altman analyses were used for statistical assessment. For profile measurements, the indirect values measured were statistically different from the direct values except for Sn-Sto in male subjects and Prn-Sn and Sn-Sto in female subjects. The indirect values of Prn-Sn and Sn-Sto were reliable in both sexes. The poorest results were obtained in the indirect values of the N-Sn parameter for female subjects and the Sn-Me parameter for male subjects according to the Sa-Sba reference distance. For frontal measurements, the indirect values were statistically different from the direct values in both sexes except for one in male subjects. The indirect values measured were not statistically different from the direct values for Go-Go. The indirect values of Ch-Ch were reliable in male subjects. The poorest results were obtained according to the P-P reference distance. For profile assessment, the T-Ex reference distance was reliable for Prn-Sn and Sn-Sto in both sexes. For frontal assessment, Ex-Ex and En-En reference distances were reliable for Ch-Ch in male subjects.

Designing legible fonts for distance reading

DEFF Research Database (Denmark)

Beier, Sofie

2016-01-01

This chapter reviews existing knowledge on distance legibility of fonts, and finds that for optimal distance reading, letters and numbers benefit from relative wide shapes, open inner counters and a large x-height; fonts should further be widely spaced, and the weight should not be too heavy or t...

Media use in long distance friendships

NARCIS (Netherlands)

Utz, S.

2007-01-01

New media such as email and mobile phones have made it easier to maintain relationships over distances. The present paper examines which media people use to maintain long-distance friendships. The main focus lies on the comparison of email and phone. Media choice theories like media richness theory

A VLBI resolution of the Pleiades distance controversy.

Science.gov (United States)

Melis, Carl; Reid, Mark J; Mioduszewski, Amy J; Stauffer, John R; Bower, Geoffrey C

2014-08-29

Because of its proximity and its youth, the Pleiades open cluster of stars has been extensively studied and serves as a cornerstone for our understanding of the physical properties of young stars. This role is called into question by the "Pleiades distance controversy," wherein the cluster distance of 120.2 ± 1.5 parsecs (pc) as measured by the optical space astrometry mission Hipparcos is significantly different from the distance of 133.5 ± 1.2 pc derived with other techniques. We present an absolute trigonometric parallax distance measurement to the Pleiades cluster that uses very long baseline radio interferometry (VLBI). This distance of 136.2 ± 1.2 pc is the most accurate and precise yet presented for the cluster and is incompatible with the Hipparcos distance determination. Our results cement existing astrophysical models for Pleiades-age stars. Copyright © 2014, American Association for the Advancement of Science.

A Short-Range Distance Sensor with Exceptional Linearity

Science.gov (United States)

Simmons, Steven; Youngquist, Robert

2013-01-01

A sensor has been demonstrated that can measure distance over a total range of about 300 microns to an accuracy of about 0.1 nm (resolution of about 0.01 nm). This represents an exceptionally large dynamic range of operation - over 1,000,000. The sensor is optical in nature, and requires the attachment of a mirror to the object whose distance is being measured. This work resulted from actively developing a white light interferometric system to be used to measure the depths of defects in the Space Shuttle Orbiter windows. The concept was then applied to measuring distance. The concept later expanded to include spectrometer calibration. In summary, broadband (i.e., white) light is launched into a Michelson interferometer, one mirror of which is fixed and one of which is attached to the object whose distance is to be measured. The light emerging from the interferometer has traveled one of two distances: either the distance to the fixed mirror and back, or the distance to the moving mirror and back. These two light beams mix and produce an interference pattern where some wavelengths interfere constructively and some destructively. Sending this light into a spectrometer allows this interference pattern to be analyzed, yielding the net distance difference between the two paths. The unique feature of this distance sensor is its ability to measure accurately distance over a dynamic range of more than one million, the ratio of its range (about 300 microns) to its accuracy (about 0.1 nanometer). Such a large linear operating range is rare and arises here because both amplitude and phase-matching algorithms contribute to the performance. The sensor is limited by the need to attach a mirror of some kind to the object being tracked, and by the fairly small total range, but the exceptional dynamic range should make it of interest.

DISTANCE LEARNING STUDENTS’ NEED: Evaluating Interactions from Moore’s Theory of Transactional Distance

Directory of Open Access Journals (Sweden)

Rusmanizah USTATI

2013-04-01

Full Text Available This study draws on the experience from a focus group interviews under the distance learning programme known as Program Pensiswazahan Guru (PPG organized by the Malaysian Ministry of Education in collaboration with local universities and institutes of education. Its purpose is to uncover students’ perception about the platform used by International Islamic University Malaysia (IIUM which is the Learning Management System (LMS. LMS is a vital instructional medium especially for the varsity distant learners. Michael Moore’s Theory of Transactional Distance is used as the guiding framework to gain insights on learning and interactions in this e-learning setting. Teacher-student interactions are analyzed for better understanding of the phenomena under study. The findings indicate that in terms of usability LMS is perceived as a good platform to acquire information on content and to receive feedback from instructors. However, IIUM learners hope for more interactivity where learners can communicate amongst themselves beside engaging with the instructor-learner- content interactions that they currently experience via the system. This study aspires to provide insights on the significance of interactions from distance learners’ perception.

INVESTIGATING DISTANCE EDUCATION STUDENTS’ STUDY SKILLS

Directory of Open Access Journals (Sweden)

Cengiz POYRAZ

2013-10-01

Full Text Available Distance education, which is a planned way of teaching in which students and instructors are brought face to face in a classroom environment in several different ways by means of technology, has started to become widespread in many fields today. In distance education, students and instructors reside in different locations. Students can learn at their pace and control their learning path, content and load of what they have learned and evaluate it. However, they should adopt strategies for effective studying in order not to waste their time and efforts. Because study skills, motivation, time management, exam preparation and coping with exam stress have an impact on students’ success. In this context, distance education students’ study skills are foregrounded in today’s widespread use of distance education. In accordance with this, this study aims to investigate some variables which are influential on the dimensions of distance education students’ motivation, time management, exam preparation and coping with exam stress. A personal information form and the Study Skills scale were used for data collection. This study was designed in survey model and SPSS16.0 statistical package program was used for the statistical analyses of the research data. The research findings were discussed in line with the literature and some suggestions were presented for further research and researchers.

Nanopowder synthesis based on electric explosion technology

Science.gov (United States)

Kryzhevich, D. S.; Zolnikov, K. P.; Korchuganov, A. V.; Psakhie, S. G.

2017-10-01

A computer simulation of the bicomponent nanoparticle formation during the electric explosion of copper and nickel wires was carried out. The calculations were performed in the framework of the molecular dynamics method using many-body potentials of interatomic interaction. As a result of an electric explosion of dissimilar metal wires, bicomponent nanoparticles having different stoichiometry and a block structure can be formed. It is possible to control the process of destruction and the structure of the formed bicomponent nanoparticles by varying the distance between the wires and the loading parameters.

Application of hot neutron scattering to the problem of 3d metallic paramagnetism

International Nuclear Information System (INIS)

Brown, P.J.; Capellmann, H.; Deportes, J.; Givord, D.; Johnson, S.M.; Ziebeck, K.R.A.

1984-01-01

The authors report in this paper on experiments performed in Fe and Ni in their paramagnetic state. Scattering of polarized neutrons with polarization analysis has been used to separate out the magnetic scattering from other sources of scattering. Large quasi-elastic scattering is observed which characterizes ferromagnetic correlations over several inter-atomic distances. The large-Q component of the scattering is fairly small as expected for itinerant electrons in which the energy of magnetic excitations may be of the order of the bandwidth. These should help discriminate between the itinerant and localized models

Diffractive Imaging of Coherent Nuclear Motion in Isolated Molecules

Energy Technology Data Exchange (ETDEWEB)

Yang, Jie; Guehr, Markus; Shen, Xiaozhe; Li, Renkai; Vecchione, Theodore; Coffee, Ryan; Corbett, Jeff; Fry, Alan; Hartmann, Nick; Hast, Carsten; Hegazy, Kareem; Jobe, Keith; Makasyuk, Igor; Robinson, Joseph; Robinson, Matthew S.; Vetter, Sharon; Weathersby, Stephen; Yoneda, Charles; Wang, Xijie; Centurion, Martin

2016-10-03

Observing the motion of the nuclear wave packets during a molecular reaction, in both space and time, is crucial for understanding and controlling the outcome of photoinduced chemical reactions. We have imaged the motion of a vibrational wave packet in isolated iodine molecules using ultrafast electron diffraction with relativistic electrons. The time-varying interatomic distance was measured with a precision 0.07 Å and temporal resolution of 230 fs full width at half maximum. The method is not only sensitive to the position but also the shape of the nuclear wave packet.

Redetermination of tetrakis(N,N-diethyldithiocarbamatotin(IV

Directory of Open Access Journals (Sweden)

Coco K. Y. A. Okio

2009-06-01

Full Text Available The crystal structure of the title compound, [Sn(C5H10NS24], was originally determined by Harreld & Schlemper [Acta Cryst. (1971, B27, 1964–1969] using intensity data estimated from Weissenberg films. In comparison with the previous refinement, the current redetermination reveals anisotropic displacement parameters for all non-H atoms, localization of the H atoms, and higher precision of lattice parameters and interatomic distances. The complex features a distorted S6 octahedral coordination geometry for tin and a cis disposition of the monodentate dithiocarbamate ligands.

Positioning for Effectiveness: Applying Marketing Concepts to Distance Education.

Science.gov (United States)

Levenburg, Nancy

1997-01-01

Demonstrates how colleges can use distance education to attract and retain a "critical mass" of learners for distance programs. Explores alternative ways to view distance education market opportunities and determine which avenues to pursue. Suggests how to be more effective in all aspects of distance education programs. (13 citations) (YKH)

Site-to-Source Finite Fault Distance Probability Distribution in Probabilistic Seismic Hazard and the Relationship Between Minimum Distances

Science.gov (United States)

Ortega, R.; Gutierrez, E.; Carciumaru, D. D.; Huesca-Perez, E.

2017-12-01

We present a method to compute the conditional and no-conditional probability density function (PDF) of the finite fault distance distribution (FFDD). Two cases are described: lines and areas. The case of lines has a simple analytical solution while, in the case of areas, the geometrical probability of a fault based on the strike, dip, and fault segment vertices is obtained using the projection of spheres in a piecewise rectangular surface. The cumulative distribution is computed by measuring the projection of a sphere of radius r in an effective area using an algorithm that estimates the area of a circle within a rectangle. In addition, we introduce the finite fault distance metrics. This distance is the distance where the maximum stress release occurs within the fault plane and generates a peak ground motion. Later, we can apply the appropriate ground motion prediction equations (GMPE) for PSHA. The conditional probability of distance given magnitude is also presented using different scaling laws. A simple model of constant distribution of the centroid at the geometrical mean is discussed, in this model hazard is reduced at the edges because the effective size is reduced. Nowadays there is a trend of using extended source distances in PSHA, however it is not possible to separate the fault geometry from the GMPE. With this new approach, it is possible to add fault rupture models separating geometrical and propagation effects.

Exploring Cloud Computing for Distance Learning

Science.gov (United States)

He, Wu; Cernusca, Dan; Abdous, M'hammed

2011-01-01

The use of distance courses in learning is growing exponentially. To better support faculty and students for teaching and learning, distance learning programs need to constantly innovate and optimize their IT infrastructures. The new IT paradigm called "cloud computing" has the potential to transform the way that IT resources are utilized and…

Writing for Distance Education. Samples Booklet.

Science.gov (United States)

International Extension Coll., Cambridge (England).

Approaches to the format, design, and layout of printed instructional materials for distance education are illustrated in 36 samples designed to accompany the manual, "Writing for Distance Education." Each sample is presented on a single page with a note pointing out its key features. Features illustrated include use of typescript layout, a comic…

Distance Synchronous Information Systems Course Delivery

Science.gov (United States)

Peslak, Alan R.; Lewis, Griffith R.; Aebli, Fred

2014-01-01

Teaching computer information systems via distance education is a challenge for both student and faculty. Much research work has been performed on methods of teaching via distance education. Today we are faced with a variety of options for course delivery. Asynchronous delivery via online or lesson instruction still remains most common. But…

Video surveillance using distance maps

Science.gov (United States)

Schouten, Theo E.; Kuppens, Harco C.; van den Broek, Egon L.

2006-02-01

Human vigilance is limited; hence, automatic motion and distance detection is one of the central issues in video surveillance. Hereby, many aspects are of importance, this paper specially addresses: efficiency, achieving real-time performance, accuracy, and robustness against various noise factors. To obtain fully controlled test environments, an artificial development center for robot navigation is introduced in which several parameters can be set (e.g., number of objects, trajectories and type and amount of noise). In the videos, for each following frame, movement of stationary objects is detected and pixels of moving objects are located from which moving objects are identified in a robust way. An Exact Euclidean Distance Map (E2DM) is utilized to determine accurately the distances between moving and stationary objects. Together with the determined distances between moving objects and the detected movement of stationary objects, this provides the input for detecting unwanted situations in the scene. Further, each intelligent object (e.g., a robot), is provided with its E2DM, allowing the object to plan its course of action. Timing results are specified for each program block of the processing chain for 20 different setups. So, the current paper presents extensive, experimentally controlled research on real-time, accurate, and robust motion detection for video surveillance, using E2DMs, which makes it a unique approach.

The Concept of Distance in International Business Research

DEFF Research Database (Denmark)

Hutzschenreuter, Thomas; Kleindienst, Ingo; Lange, Sandra

2016-01-01

are affected by distance? and What aggravates or alleviates the effects of distance? Based on the review of the literature, a set of future research suggestions are developed, intended to direct attention to research questions that the authors believe are among the most pressing questions in distance research...

Contemporary Distance Education Leadership: Distance Education Leaders' Perceptions of Leadership Competencies

Science.gov (United States)

Tantchou, Pierre Orly M., Jr.

2013-01-01

This phenomenological qualitative study identified the leadership competencies that distance education (DE) leaders regard as essential to the successful administration of DE programs and courses in contemporary education. The following competencies were discussed in the study: flexibility, collaboration, active listening, communication, empathy,…

DISTANCE LEARNING: POTENTIAL APPLICATION AND DEVELOPMENT OUTLOOK

Directory of Open Access Journals (Sweden)

Yulija Mihajlovna Tsarapkina

2017-11-01

Full Text Available The article is devoted to the actual problem of distance education potential and prospects research in the Russian education system. According to the UNESCO estimates, if the current trend continues, then the number of people with a firm desire to receive an education would increase from 165 millions to 263 millions [7, 12]. Thus 98 million qualified students worldwide will be excluded from higher education due to a shortage of university seats. The purpose of the study is to analyze the historical and present state of the problem, to identify the potential and prospects of the development in distance learning within higher education. The methodological base of the research has become common methods of pedagogical sciences: pedagogical observation, survey, questionnaire, testing, comparative analysis, pedagogical experiment. The analytical review has shown several problem areas within distance learning, such as student’s motivation while distance course learning and training efficiency as compared to full-time university training. Combination of full-time training and distance learning leads to 31% enhancement of training efficiency and shows a sustainable increase of student’s motivation.

Distance Learning Plan Development: Initiating Organizational Structures

National Research Council Canada - National Science Library

Poole, Clifton

1998-01-01

.... Army distance learning plan managers to examine the DLPs they were directing. The analysis showed that neither army nor civilian distance learning plan managers used formalized requirements for organizational structure development (OSD...

Investigating Distance Education Students' Study Skills

Science.gov (United States)

Poyraz, Cengiz

2013-01-01

Distance education, which is a planned way of teaching in which students and instructors are brought face to face in a classroom environment in several different ways by means of technology, has started to become widespread in many fields today. In distance education, students and instructors reside in different locations. Students can learn at…

NASA Langley/CNU Distance Learning Programs.

Science.gov (United States)

Caton, Randall; Pinelli, Thomas E.

NASA Langley Research Center and Christopher Newport University (CNU) provide, free to the public, distance learning programs that focus on math, science, and/or technology over a spectrum of education levels from K-adult. The effort started in 1997, and currently there are a suite of five distance-learning programs. This paper presents the major…

Assessing distances and consistency of kinematics in Gaia/TGAS

Science.gov (United States)

Schönrich, Ralph; Aumer, Michael

2017-12-01

We apply the statistical methods by Schönrich, Binney & Asplund to assess the quality of distances and kinematics in the Radial Velocity Experiment (RAVE)-Tycho-Gaia Astrometric Solution (TGAS) and Large Sky Area Multiobject Fiber Spectroscopic Telescope (LAMOST)-TGAS samples of Solar neighbourhood stars. These methods yield a nominal distance accuracy of 1-2 per cent. Other than common tests on parallax accuracy, they directly test distance estimations including the effects of distance priors. We show how to construct these priors including the survey selection functions (SSFs) directly from the data. We demonstrate that neglecting the SSFs causes severe distance biases. Due to the decline of the SSFs in distance, the simple 1/parallax estimate only mildly underestimates distances. We test the accuracy of measured line-of-sight velocities (vlos) by binning the samples in the nominal vlos uncertainties. We find: (i) the LAMOST vlos have a ∼-5 km s-1 offset; (ii) the average LAMOST measurement error for vlos is ∼7 km s-1, significantly smaller than, and nearly uncorrelated with the nominal LAMOST estimates. The RAVE sample shows either a moderate distance underestimate, or an unaccounted source of vlos dispersion (e∥) from measurement errors and binary stars. For a subsample of suspected binary stars in RAVE, our methods indicate significant distance underestimates. Separating a sample in metallicity or kinematics to select thick-disc/halo stars, discriminates between distance bias and e∥. For LAMOST, this separation yields consistency with pure vlos measurement errors. We find an anomaly near longitude l ∼ (300 ± 60)° and distance s ∼ (0.32 ± 0.03) kpc on both sides of the galactic plane, which could be explained by either a localized distance error or a breathing mode.

49 CFR 372.300 - Distances and population data.

Science.gov (United States)

2010-10-01

... 49 Transportation 5 2010-10-01 2010-10-01 false Distances and population data. 372.300 Section 372..., COMMERCIAL ZONES, AND TERMINAL AREAS Terminal Areas § 372.300 Distances and population data. In the application of this subpart, distances and population data shall be determined in the same manner as provided...

A Strategic Planning Process Model for Distance Education

Science.gov (United States)

Pisel, Kenneth P.

2008-01-01

As more institutions seek to implement or expand distance learning programs, it becomes critical to integrate distance learning programs into broader strategic visions and plans. Using the informed opinion from a panel of peer-nominated experts via iterative Delphi questionnaires, a 10-phased strategic planning process model for distance education…

Distance Education in Mixed Institutions: Working towards Parity.

Science.gov (United States)

Jevons, Fred

1984-01-01

Describes organizational structure of Deakin University (which teaches on and off campus), compares distance education with face-to-face education, lists advantages of distance education, and predicts distance education will rise in status and expand in role due to its suitability for adult students and because of technological developments,…

Distance Learning For Mobile Internet Users

Directory of Open Access Journals (Sweden)

Beran NECAT

2007-04-01

Full Text Available This paper provides an overview on the current state of art in the field of Distance learning for mobile users. It mentions a large range of technologies, services and approaches that may be used to bring distance learning to mobile internet users. These technologies are supposed to considerably increase innovative e-learning solutions for the next generation. While this definitely appears to be true, I think what is not so clear are the implications for students, and lecturers etc. In this article I first evaluate distributed e-learning technologies. With some of the most vital topics, focusing on adaptive distributed e-learning for Mobile Internet Users (MIUs. I also provide a brief analysis of Broadband Network Services, Collaborative e-Learning Tools and Distributed Virtual Environments, Internet-Based Adaptive Learning Technologies and Personalised Distance Learning. I continue my discussion on to Internet Development Tools (IDTs for Distance Learning Solutions, Learning Technologies for MIUs, Semantic and Web-Based Services for Enriching Learning Interactivity, and Evaluations of Distributed Learning Technologies (DLTs.

Indo-European languages tree by Levenshtein distance

Science.gov (United States)

Serva, M.; Petroni, F.

2008-03-01

The evolution of languages closely resembles the evolution of haploid organisms. This similarity has been recently exploited (Gray R. D. and Atkinson Q. D., Nature, 426 (2003) 435; Gray R. D. and Jordan F. M., Nature, 405 (2000) 1052) to construct language trees. The key point is the definition of a distance among all pairs of languages which is the analogous of a genetic distance. Many methods have been proposed to define these distances; one of these, used by glottochronology, computes the distance from the percentage of shared "cognates". Cognates are words inferred to have a common historical origin, and subjective judgment plays a relevant role in the identification process. Here we push closer the analogy with evolutionary biology and we introduce a genetic distance among language pairs by considering a renormalized Levenshtein distance among words with same meaning and averaging on all words contained in a Swadesh list (Swadesh M., Proc. Am. Philos. Soc., 96 (1952) 452). The subjectivity of process is consistently reduced and the reproducibility is highly facilitated. We test our method against the Indo-European group considering fifty different languages and the two hundred words of the Swadesh list for any of them. We find out a tree which closely resembles the one published in Gray and Atkinson (2003), with some significant differences.

Beyond packing of hard spheres: The effects of core softness, non-additivity, intermediate-range repulsion, and many-body interactions on the glass-forming ability of bulk metallic glasses

Energy Technology Data Exchange (ETDEWEB)

Zhang, Kai; Fan, Meng; Liu, Yanhui; Schroers, Jan [Department of Mechanical Engineering and Materials Science, Yale University, New Haven, Connecticut 06520 (United States); Center for Research on Interface Structures and Phenomena, Yale University, New Haven, Connecticut 06520 (United States); Shattuck, Mark D. [Department of Mechanical Engineering and Materials Science, Yale University, New Haven, Connecticut 06520 (United States); Department of Physics and Benjamin Levich Institute, The City College of the City University of New York, New York, New York 10031 (United States); O’Hern, Corey S. [Department of Mechanical Engineering and Materials Science, Yale University, New Haven, Connecticut 06520 (United States); Center for Research on Interface Structures and Phenomena, Yale University, New Haven, Connecticut 06520 (United States); Department of Physics, Yale University, New Haven, Connecticut 06520 (United States); Department of Applied Physics, Yale University, New Haven, Connecticut 06520 (United States)

2015-11-14

When a liquid is cooled well below its melting temperature at a rate that exceeds the critical cooling rate R{sub c}, the crystalline state is bypassed and a metastable, amorphous glassy state forms instead. R{sub c} (or the corresponding critical casting thickness d{sub c}) characterizes the glass-forming ability (GFA) of each material. While silica is an excellent glass-former with small R{sub c} < 10{sup −2} K/s, pure metals and most alloys are typically poor glass-formers with large R{sub c} > 10{sup 10} K/s. Only in the past thirty years have bulk metallic glasses (BMGs) been identified with R{sub c} approaching that for silica. Recent simulations have shown that simple, hard-sphere models are able to identify the atomic size ratio and number fraction regime where BMGs exist with critical cooling rates more than 13 orders of magnitude smaller than those for pure metals. However, there are a number of other features of interatomic potentials beyond hard-core interactions. How do these other features affect the glass-forming ability of BMGs? In this manuscript, we perform molecular dynamics simulations to determine how variations in the softness and non-additivity of the repulsive core and form of the interatomic pair potential at intermediate distances affect the GFA of binary alloys. These variations in the interatomic pair potential allow us to introduce geometric frustration and change the crystal phases that compete with glass formation. We also investigate the effect of tuning the strength of the many-body interactions from zero to the full embedded atom model on the GFA for pure metals. We then employ the full embedded atom model for binary BMGs and show that hard-core interactions play the dominant role in setting the GFA of alloys, while other features of the interatomic potential only change the GFA by one to two orders of magnitude. Despite their perturbative effect, understanding the detailed form of the intermetallic potential is important for

Distance-Based Opportunistic Mobile Data Offloading.

Science.gov (United States)

Lu, Xiaofeng; Lio, Pietro; Hui, Pan

2016-06-15

Cellular network data traffic can be offload onto opportunistic networks. This paper proposes a Distance-based Opportunistic Publish/Subscribe (DOPS) content dissemination model, which is composed of three layers: application layer, decision-making layer and network layer. When a user wants new content, he/she subscribes on a subscribing server. Users having the contents decide whether to deliver the contents to the subscriber based on the distance information. If in the meantime a content owner has traveled further in the immediate past time than the distance between the owner and the subscriber, the content owner will send the content to the subscriber through opportunistic routing. Simulations provide an evaluation of the data traffic offloading efficiency of DOPS.

De-severing distance

DEFF Research Database (Denmark)

Jensen, Hanne Louise; de Neergaard, Maja

2016-01-01

De-severing Distance This paper draws on the growing body of mobility literature that shows how mobility can be viewed as meaningful everyday practices (Freudendal –Pedersen 2007, Cresswell 2006) this paper examines how Heidegger’s term de-severing can help us understand the everyday coping with ...

The distances of nearby cool carbon stars

International Nuclear Information System (INIS)

Bergeat, J.; Sibille, F.; Lunel, M.

1978-01-01

Distance ratios are provided for 38 cool carbon stars on the basis of a previous study (Bergeat et al., 1976 a,b,c). The validation of this distance scale is obtained through an analysis of stellar velocities. A relationship is established between proper motions and the distance scale. Luminosities and radii are derived for cool carbon stars which permit a discussion of their evolutionary status. Finally, evaluations are given for the rate of mass ejection corresponding to large graphite grains. (WL) [de

Is linear distance measured by panoramic radiography reliable?

International Nuclear Information System (INIS)

Nishikawa, Keiichi; Wakoh, Mamoru; Sano, Tsukasa; Suehiro, Atsushi; Sekine, Hideshi; Kousuge, Yuuji

2010-01-01

The objective of this study was to re-examine the reliability of distance measurements on clinical panoramic radiographs by comparing them with computed tomography (CT) images, from which the most accurate distance measurement is possible. Twenty pairs of images from patients examined both with panoramic radiography and CT for dental implant treatment planning in the premolar and molar regions of the mandible were used. The vertical linear distance between the alveolar crest and the closest mandibular canal was measured by three experienced oral radiologists on both images. The distances measured on panoramic radiographs were corrected for the magnification factor at the focal plane. Double-oblique cross-sectional images were used for CT. Pearson's correlation coefficient was calculated between distances obtained from both images. The paired t test was performed for statistical comparison. Error levels with the panoramic radiograph versus the CT image were also calculated. Pearson's correlation coefficient showed a significant strong linear correlation (R=0.90; p<0.01). However, the corrected value of distance measured on panoramic radiographs tended to be too small, and a significant difference was observed (p<0.05). The error level was approximately 10% (9.6±7.3%). Distance measurement on clinical panoramic radiographs is less reliable than CT images and cannot be recommended. (author)

Distance estimation experiment for aerial minke whale surveys

Directory of Open Access Journals (Sweden)

Lars Witting

2009-09-01

Full Text Available A comparative study between aerial cue–counting and digital photography surveys for minke whales conducted in Faxaflói Bay in September 2003 is used to check the perpendicular distances estimated by the cue-counting observers. The study involved 2 aircraft with the photo plane at 1,700 feet flying above the cue–counting plane at 750 feet. The observer–based distance estimates were calculated from head angles estimated by angle-boards and declination angles estimated by declinometers. These distances were checked against image–based estimates of the perpendicular distance to the same whale. The 2 independent distance estimates were obtained for 21 sightings of minke whale, and there was a good agreement between the 2 types of estimates. The relative absolute deviations between the 2 estimates were on average 23% (se: 6%, with the errors in the observer–based distance estimates resembling that of a log-normal distribution. The linear regression of the observer–based estimates (obs on the image–based estimates (img was Obs=1.1Img (R2=0.85 with an intercept fixed at zero. There was no evidence of a distance estimation bias that could generate a positive bias in the absolute abundance estimated by cue–counting.

Computing discrete signed distance fields from triangle meshes

DEFF Research Database (Denmark)

Bærentzen, Jakob Andreas; Aanæs, Henrik

2002-01-01

A method for generating a discrete, signed 3D distance field is proposed. Distance fields are used in a number of contexts. In particular the popular level set method is usually initialized by a distance field. The main focus of our work is on simplifying the computation of the sign when generating...

Ultrametric Distance in Syntax

Directory of Open Access Journals (Sweden)

Roberts Mark D.

2015-04-01

Full Text Available Phrase structure trees have a hierarchical structure. In many subjects, most notably in taxonomy such tree structures have been studied using ultrametrics. Here syntactical hierarchical phrase trees are subject to a similar analysis, which is much simpler as the branching structure is more readily discernible and switched. The ambiguity of which branching height to choose, is resolved by postulating that branching occurs at the lowest height available. An ultrametric produces a measure of the complexity of sentences: presumably the complexity of sentences increases as a language is acquired so that this can be tested. All ultrametric triangles are equilateral or isosceles. Here it is shown that X̅ structure implies that there are no equilateral triangles. Restricting attention to simple syntax a minimum ultrametric distance between lexical categories is calculated. A matrix constructed from this ultrametric distance is shown to be different than the matrix obtained from features. It is shown that the definition of C-COMMAND can be replaced by an equivalent ultrametric definition. The new definition invokes a minimum distance between nodes and this is more aesthetically satisfying than previous varieties of definitions. From the new definition of C-COMMAND follows a new definition of of the central notion in syntax namely GOVERNMENT.

Weierstrass semigroups and the Feng-Rao Distance

DEFF Research Database (Denmark)

Campillo, Antonio; Farran, Ignacio

2000-01-01

We detrmine the Feng-Rao distance for several claases of codes from algebraic geometry usingthe weierstrass semigroups......We detrmine the Feng-Rao distance for several claases of codes from algebraic geometry usingthe weierstrass semigroups...

A heuristic derivation of Minkowski distance and Lorentz transformation

International Nuclear Information System (INIS)

Hassani, Sadri

2008-01-01

Students learn new abstract concepts best when these concepts are connected through a well-designed analogy, to familiar ideas. Since the concept of the relativistic spacetime distance is highly abstract, it would be desirable to connect it to the familiar Euclidean distance, but present the latter in such a way that it makes a transparent contact with the former. Starting with some intuitive and 'obvious' assumptions concerning distance in one dimension, we 'derive' the two-dimensional Euclidean distance between two points in terms of their coordinates. Then, assuming the invariance of this distance, we deduce the (familiar) two-dimensional orthogonal coordinate transformation. We present the derivation in such a way that the transition to spacetime becomes 'self-evident.' Thus, following exactly the same procedure, we derive the Minkowskian distance and the corresponding transformation that respects the invariance of that distance, i.e., the Lorentz transformation

Research of the stopping distance for different road conditions

Directory of Open Access Journals (Sweden)

Daniel LYUBENOV

2011-01-01

Full Text Available In this paper a modern method for determination of stopping distance is represented. Application of the non-contact VBOX 3i 100Hz GPS Data Logger speed and distance measurement system is represented. A description of the total stopping distance of vehicle main components - driver reaction time, vehicle reaction time and vehicle braking capability has been made. Research of the total stopping distance of a vehicle for different road conditions has been made. The results for the stopping distance can be very useful in the expert practice.

STUDY REGARDING OFFER ON DISTANCE ACCOUNTING EDUCATION IN ROMANIA

Directory of Open Access Journals (Sweden)

TEIUŞAN SORIN-CIPRIAN

2015-12-01

Full Text Available The national study programme forms of organization are: daily attendance studies, low attendance studies, and distance education. The objective of this study is to research the distance accounting education. The paper examines the offer for distance education in accounting. We identified all public and private universities who provide a study program on distance accounting education. By analysing the maximum number of students that can be schooled in distance learning and the tuition fee, comparative with full-time program, we intend to offer information to those interested in the accounting education domain.

Development of the table of initial isolation distances and protective action distances for the 2004 emergency response guidebook.

Energy Technology Data Exchange (ETDEWEB)

Brown, D. F.; Freeman, W. A.; Carhart, R. A.; Krumpolc, M.; Decision and Information Sciences; Univ. of Illinois at Chicago

2005-09-23

This report provides technical documentation for values in the Table of Initial Isolation and Protective Action Distances (PADs) in the 2004 Emergency Response Guidebook (ERG2004). The objective for choosing the PADs specified in the ERG2004 is to balance the need to adequately protect the public from exposure to potentially harmful substances against the risks and expenses that could result from overreacting to a spill. To quantify this balance, a statistical approach is adopted, whereby the best available information is used to conduct an accident scenario analysis and develop a set of up to 1,000,000 hypothetical incidents. The set accounts for differences in containers types, incident types, accident severity (i.e., amounts released), locations, times of day, times of year, and meteorological conditions. Each scenario is analyzed using detailed emission rate and atmospheric dispersion models to calculate the downwind chemical concentrations from which a 'safe distance' is determined. The safe distance is defined as the distance downwind from the source at which the chemical concentration falls below health protection criteria. The American Industrial Hygiene Association's Emergency Response Planning Guideline Level 2 (ERPG-2) or equivalent is the health criteria used. The statistical sample of safe distance values for all incidents considered in the analysis are separated into four categories: small spill/daytime release, small spill/nighttime release, large spill/daytime release, and large spill/nighttime release. The 90th-percentile safe distance values for each of these groups became the PADs that appear in the ERG2004.

Single-Image Distance Measurement by a Smart Mobile Device.

Science.gov (United States)

Chen, Shangwen; Fang, Xianyong; Shen, Jianbing; Wang, Linbo; Shao, Ling

2017-12-01

Existing distance measurement methods either require multiple images and special photographing poses or only measure the height with a special view configuration. We propose a novel image-based method that can measure various types of distance from single image captured by a smart mobile device. The embedded accelerometer is used to determine the view orientation of the device. Consequently, pixels can be back-projected to the ground, thanks to the efficient calibration method using two known distances. Then the distance in pixel is transformed to a real distance in centimeter with a linear model parameterized by the magnification ratio. Various types of distance specified in the image can be computed accordingly. Experimental results demonstrate the effectiveness of the proposed method.

Diverse effects of distance cutoff and residue interval on the performance of distance-dependent atom-pair potential in protein structure prediction.

Science.gov (United States)

Yao, Yuangen; Gui, Rong; Liu, Quan; Yi, Ming; Deng, Haiyou

2017-12-08

As one of the most successful knowledge-based energy functions, the distance-dependent atom-pair potential is widely used in all aspects of protein structure prediction, including conformational search, model refinement, and model assessment. During the last two decades, great efforts have been made to improve the reference state of the potential, while other factors that also strongly affect the performance of the potential have been relatively less investigated. Based on different distance cutoffs (from 5 to 22 Å) and residue intervals (from 0 to 15) as well as six different reference states, we constructed a series of distance-dependent atom-pair potentials and tested them on several groups of structural decoy sets collected from diverse sources. A comprehensive investigation has been performed to clarify the effects of distance cutoff and residue interval on the potential's performance. Our results provide a new perspective as well as a practical guidance for optimizing distance-dependent statistical potentials. The optimal distance cutoff and residue interval are highly related with the reference state that the potential is based on, the measurements of the potential's performance, and the decoy sets that the potential is applied to. The performance of distance-dependent statistical potential can be significantly improved when the best statistical parameters for the specific application environment are adopted.

Male and female contributions to behavioral isolation in darters as a function of genetic distance and color distance

Science.gov (United States)

Moran, Rachel L.; Zhou, Muchu; Catchen, Julian M.; Fuller, Rebecca C.

2017-01-01

Abstract Determining which reproductive isolating barriers arise first between geographically isolated lineages is critical to understanding allopatric speciation. We examined behavioral isolation among four recently diverged allopatric species in the orangethroat darter clade (Etheostoma: Ceasia). We also examined behavioral isolation between each Ceasia species and the sympatric rainbow darter Etheostoma caeruleum. We asked (1) is behavioral isolation present between allopatric Ceasia species, and how does this compare to behavioral isolation with E. caeruleum, (2) does male color distance and/or genetic distance predict behavioral isolation between species, and (3) what are the relative contributions of female choice, male choice, and male competition to behavioral isolation? We found that behavioral isolation, genetic differentiation, and male color pattern differentiation were present between allopatric Ceasia species. Males, but not females, discerned between conspecific and heterospecific mates. Males also directed more aggression toward conspecific rival males. The high levels of behavioral isolation among Ceasia species showed no obvious pattern with genetic distance or male color distance. However, when the E. caeruleum was included in the analysis, an association between male aggression and male color distance was apparent. We discuss the possibility that reinforcement between Ceasia and E. caeruleum is driving behavioral isolation among allopatric Ceasia species. PMID:28776645

Students’ Views of Distance Education Provision at One University

Directory of Open Access Journals (Sweden)

Nalan YILMAZ

2005-10-01

Full Text Available Students’ Views of Distance Education Provision at One University Assist. Prof. Dr. Binnur Genç ILTERAkdeniz University, Faculty of Education Prof. Dr. Mualla Bilgin AKSUInönü University, Faculty of Education Lecturer. Nalan YILMAZAkdeniz University, Faculty of Education ABSTRACT Providing university students with distance education is of great importance in the global world. Distance education provides advantages and benefits especially for students who don’t have the chance to meet lecturers from other universities face to face. Distance education connects the learner and teacher to resources that are difficult to access otherwise. It is not necessary to gather students in one classroom at the same time in a distance program. Through distance education facilities students and lecturers can store, update and transfer information very quickly. Furthermore, distance education helps save money in terms of accommodation and travel expenses. This paper describes students’ perceptions and attitudes towards distance education based on their gender, school types attended, age and access to educational technology such as computer and internet. This paper also describes the specific program used by the faculty of Law at Akdeniz University,Turkey.

Distance-Based Opportunistic Mobile Data Offloading

Directory of Open Access Journals (Sweden)

Xiaofeng Lu

2016-06-01

Full Text Available Cellular network data traffic can be offload onto opportunistic networks. This paper proposes a Distance-based Opportunistic Publish/Subscribe (DOPS content dissemination model, which is composed of three layers: application layer, decision-making layer and network layer. When a user wants new content, he/she subscribes on a subscribing server. Users having the contents decide whether to deliver the contents to the subscriber based on the distance information. If in the meantime a content owner has traveled further in the immediate past time than the distance between the owner and the subscriber, the content owner will send the content to the subscriber through opportunistic routing. Simulations provide an evaluation of the data traffic offloading efficiency of DOPS.

Correlation function of the luminosity distances

Energy Technology Data Exchange (ETDEWEB)

Biern, Sang Gyu; Yoo, Jaiyul, E-mail: sgbiern@physik.uzh.ch, E-mail: jyoo@physik.uzh.ch [Center for Theoretical Astrophysics and Cosmology, Institute for Computational Science, University of Zürich, Winterthurerstrasse 190, CH-8057, Zürich (Switzerland)

2017-09-01

We present the correlation function of the luminosity distances in a flat ΛCDM universe. Decomposing the luminosity distance fluctuation into the velocity, the gravitational potential, and the lensing contributions in linear perturbation theory, we study their individual contributions to the correlation function. The lensing contribution is important at large redshift ( z ∼> 0.5) but only for small angular separation (θ ∼< 3°), while the velocity contribution dominates over the other contributions at low redshift or at larger separation. However, the gravitational potential contribution is always subdominant at all scale, if the correct gauge-invariant expression is used. The correlation function of the luminosity distances depends significantly on the matter content, especially for the lensing contribution, thus providing a novel tool of estimating cosmological parameters.

Ultraluminous X-ray sources: new distance indicators?

Science.gov (United States)

Różańska, A.; Bresler, K.; Bełdycki, B.; Madej, J.; Adhikari, T. P.

2018-05-01

Aims: In this paper we fit the NuSTAR and XMM-Newton data of three sources: NGC 7793 P13, NGC5907 ULX1, and Circinus ULX5. Methods: Our single model contains emission from a non-spherical system: a neutron star plus an accretion disk directed towards the observer. Results: We obtained a very good fit with the reduced χ2 per degree of freedom equal to 1.08 for P13, 1.01 for ULX1, and 1.14 for ULX5. The normalization of our model constrains the distance to the source. The resulting distances are D = 3.41-0.10+0.11, 6.55-0.81+0.69, and 2.60-0.03+0.05 Mpc for P13, ULX1, and ULX5 respectively. The distances to P13 and ULX5 are in perfect agreement with previous distance measurements to their host galaxies. Conclusions: Our results confirm that P13, ULX1, and ULX5 may contain central hot neutron stars. When the outgoing emission is computed by integration over the emitting surface and successfully fitted to the data, then the resulting model normalization is the direct distance indicator.

On-the-Fly Computation of Bisimilarity Distances

DEFF Research Database (Denmark)

Bacci, Giorgio; Bacci, Giovanni; Larsen, Kim Guldstrand

2017-01-01

of Desharnais et al. between discrete-time Markov chains as an optimal solution of a linear program that can be solved by using the ellipsoid method. Inspired by their result, we propose a novel linear program characterization to compute the distance in the continuous-time setting. Differently from previous......We propose a distance between continuous-time Markov chains (CTMCs) and study the problem of computing it by comparing three different algorithmic methodologies: iterative, linear program, and on-the-fly. In a work presented at FoSSaCS'12, Chen et al. characterized the bisimilarity distance...... proposals, ours has a number of constraints that is bounded by a polynomial in the size of the CTMC. This, in particular, proves that the distance we propose can be computed in polynomial time. Despite its theoretical importance, the proposed linear program characterization turns out to be inefficient...

Improving Distance Courses: Understanding Teacher Trainees and their Learning Styles for the design of Teacher Training Courses and Materials at a Distance

Directory of Open Access Journals (Sweden)

Hisham DZAKIRIA

2004-01-01

Full Text Available Literature on distance education and teacher education seems to show that what we do not know about Distance Teacher Trainees (DTT and their learning process involved exceeds what we know about it. As more DTT enroll in distance education programmes globally, distance education providers and institutions will witness trainees coming with different backgrounds and experiences begin to take advantage of this learning opportunities. One important variable in the effectiveness of distance learning is the preference of the distance learner for a particular learning mode. A key to maintaining distance learners participation in learning lies in understanding the Learning Styles Preferences (LSP and the processes involved.This is also true for teacher training. There is much greater variation in the range of LSP and how to address them when preparing distance training materials and courses. The primary purpose of this paper is to propose ways in which individual learning differences should be accommodated when designing instructional learning materials in print for DTTs. Kolb’s (1984 model on learning cycle and styles are discussed to provide instructional design guidelines which accommodate each stage of the learning cycles and individual differences between DTT in processing and presenting information and knowledge. In addition, issues on teacher education, distance learning, individual differences, and ways in which the ‘differences’ can be accommodated when designing learning materials for DTT are also discussed. This paper resonates the idea and belief that if attempts are made to match learning styles of DTTs and andragogy with content to be learned, distance teacher educators (DTEs and instructors can develop better instructional materials with greater prospects of success. Getting to know and understand the teacher trainees and their learning process involved must first be addressed to facilitate the diverse needs of the Malaysian teacher

An adaptive distance measure for use with nonparametric models

International Nuclear Information System (INIS)

Garvey, D. R.; Hines, J. W.

2006-01-01

Distance measures perform a critical task in nonparametric, locally weighted regression. Locally weighted regression (LWR) models are a form of 'lazy learning' which construct a local model 'on the fly' by comparing a query vector to historical, exemplar vectors according to a three step process. First, the distance of the query vector to each of the exemplar vectors is calculated. Next, these distances are passed to a kernel function, which converts the distances to similarities or weights. Finally, the model output or response is calculated by performing locally weighted polynomial regression. To date, traditional distance measures, such as the Euclidean, weighted Euclidean, and L1-norm have been used as the first step in the prediction process. Since these measures do not take into consideration sensor failures and drift, they are inherently ill-suited for application to 'real world' systems. This paper describes one such LWR model, namely auto associative kernel regression (AAKR), and describes a new, Adaptive Euclidean distance measure that can be used to dynamically compensate for faulty sensor inputs. In this new distance measure, the query observations that lie outside of the training range (i.e. outside the minimum and maximum input exemplars) are dropped from the distance calculation. This allows for the distance calculation to be robust to sensor drifts and failures, in addition to providing a method for managing inputs that exceed the training range. In this paper, AAKR models using the standard and Adaptive Euclidean distance are developed and compared for the pressure system of an operating nuclear power plant. It is shown that using the standard Euclidean distance for data with failed inputs, significant errors in the AAKR predictions can result. By using the Adaptive Euclidean distance it is shown that high fidelity predictions are possible, in spite of the input failure. In fact, it is shown that with the Adaptive Euclidean distance prediction

Adaptive Distance Protection for Microgrids

DEFF Research Database (Denmark)

Lin, Hengwei; Guerrero, Josep M.; Quintero, Juan Carlos Vasquez

2015-01-01

is adopted to accelerate the tripping speed of the relays on the weak lines. The protection methodology is tested on a mid-voltage microgrid network in Aalborg, Denmark. The results show that the adaptive distance protection methodology has good selectivity and sensitivity. What is more, this system also has......Due to the increasing penetration of distributed generation resources, more and more microgrids can be found in distribution systems. This paper proposes a phasor measurement unit based distance protection strategy for microgrids in distribution system. At the same time, transfer tripping scheme...

When Do Distance Effects Become Empirically Observable?

DEFF Research Database (Denmark)

Beugelsdijk, Sjoerd; Nell, Phillip C.; Ambos, Björn

2017-01-01

Integrating distance research with the behavioral strategy literature on MNC headquarters-subsidiary relations, this paper explores how the distance between headquarters and subsidiaries relates to value added by the headquarters. We show for 124 manufacturing subsidiaries in Europe that...

Universal amorphous-amorphous transition in GexSe100-x glasses under pressure

DEFF Research Database (Denmark)

Yildirim, Can; Micoulaut, Matthieu; Boolchand, Punit

2016-01-01

Pressure induced structural modifications in vitreous GexSe100−x (where 10 ≤ x ≤ 25) are investigated using X-ray absorption spectroscopy (XAS) along with supplementary X-ray diffraction (XRD) experiments and ab initio molecular dynamics (AIMD) simulations. Universal changes in distances and angle......–20 GPa, depending on the composition. This increase is attributed to the metallization event that can be traced with the red shift in Ge K edge energy which is also identified by the principal peak position of the structure factor. The densification mechanisms are studied in details by means of AIMD...... simulations and compared to the experimental results. The evolution of bond angle distributions, interatomic distances and coordination numbers are examined and lead to similar pressure-induced structural changes for any composition....

Bioenergetic constraints on tactical decision making in middle distance running.

Science.gov (United States)

Jones, A M; Whipp, B J

2002-04-01

The highest velocity that a runner can sustain during middle distance races is defined by the intersection of the runner's individual velocity-time curve and the distance-time curve. The velocity-time curve is presumably fixed at the onset of a race; however, whereas the race distance is ostensibly fixed, the actual distance-time curve is not. That is, it is possible for a runner to run further than the race distance if he or she runs wide on bends in track races. In this instance, the point of intersection of the individual velocity-time curve and the distance-time curve will move downwards and to the right, reducing the best average velocity that can be sustained for the distance. To illustrate this point, the race tactics used by the gold and silver medallists at 800 m and 5000 m in the Sydney Olympics were analysed. The paths taken by the runners were carefully tracked and the total distance they covered during the races and the average velocity they sustained over the distances they actually covered were calculated. In both the Olympic 800 m and 5000 m finals, for example, the winner was not the runner who ran at the highest average velocity in the race. Rather, the winners of these races were able to husband their metabolic resources to better effect by running closer to the actual race distance. Race results in middle distance running events are dependent not just on the energetic potential of the runners at the start of the race and their strategy for pace allocation, but also on the effect of their tactical approach to positioning on the total distance covered in the race. Middle distance runners should be conscious of minimising the distance covered in races if they wish to optimise their performance.

Psychological distance cues in online messages: Interrelatedness of probability and spatial distance

NARCIS (Netherlands)

Sungur, H.; van Koningsbruggen, G.M.; Hartmann, T.

2017-01-01

Growing evidence reveals that people rely on heuristic cues when processing online information. The current research, by adopting a construal level theory approach, examined whether psychological distance cues within online messages influence message processing. According to construal level theory,

Copyright law and distance nursing education.

Science.gov (United States)

Rhoads, Jacqueline; White, Carolyn

2008-01-01

The authors present essential information regarding the copyright law and online education. This information provides the reader specific aids to assist in designing and implementing distance education courses within the bounds of the Technology, Education, and Copyright Harmonization Act and fair use guidelines. From their research, the authors, who are distance education experts, offer a wide array of educational and legal data to inform nurse educators.

Structure and magnetic transition of LaFe13-xSix compounds

International Nuclear Information System (INIS)

Bo Liuxu; Altounian, Z; Ryan, D H

2003-01-01

Structure and magnetic transitions were investigated by x-ray diffraction and Moessbauer spectroscopy in LaFe 13-x Si x compounds with x = 1.6, 2.0 and 2.6. With increasing Si content, the La-Fe interatomic distance decreased while the average Fe-Fe distance increased. These changes affect the structural stability and the magnetic properties of the compounds. The temperature dependence of the hyperfine field for the compound with x = 2.6 can be fitted very well using a mean field model with a Brillouin function (BF) while that for the compounds with x = 1.6 and 2.0 changes more sharply than that predicted by the BF relation near the Curie temperature. The different nature of the magnetic transition with different Si content originates from the spatial distribution of the Si atoms and related variation of the La-(Fe, Si) and the Fe-Fe distances in the cubic NaZn 13 structure

Optimised cut-off function for Tersoff-like potentials for a BN nanosheet: a molecular dynamics study

International Nuclear Information System (INIS)

Kumar, Rajesh; Rajasekaran, G; Parashar, Avinash

2016-01-01

In this article, molecular dynamics based simulations were carried out to study the tensile behaviour of boron nitride nanosheets (BNNSs). Four different sets of Tersoff potential parameters were used in the simulations for estimating the interatomic interactions between boron and nitrogen atoms. Modifications were incorporated in the Tersoff cut-off function to improve the accuracy of results with respect to fracture stress, fracture strain and Young’s modulus. In this study, the original cut-off function was optimised in such a way that small and large cut-off distances were made equal, and hence a single cut-off distance was used with all sets of Tersoff potential parameters. The single value of cut-off distance for the Tersoff potential was chosen after analysing the potential energy and bond forces experienced by boron and nitrogen atoms subjected to bond stretching. The simulations performed with the optimised cut-off function help in identifying the Tersoff potential parameters that reproduce the experimentally evaluated mechanical behaviour of BNNSs. (paper)

First Year Distance Transition Pedagogy: Synchronous online classrooms

Directory of Open Access Journals (Sweden)

Wendy Fasso

2013-04-01

Full Text Available The design and facilitation of distance online courses for first year students must consider both first year, and distance pedagogy. One technology with the promise to meet the needs of first year distance students is the synchronous online classroom. Teacher practice as they transition from face to face to distance environments is influenced by their private theories about technology and pedagogy. Any limitations posed by these private theories may limit in turn the technological, pedagogical and content knowledge of the teachers – TPACK. This paper reports on the case of a regional university as it transitions to online, distance learning in the first year context, with a particular focus on pedagogy in the online classroom. It contributes to the first year pedagogy literature by considering the influences of existing practice of university teachers in the transition to distance learning with a particular focus on synchronous web-based tutorials. It provides recommendations to other institutions in terms of transition strategies, the pedagogical and learning benefits that are enabled and professional development needs of teachers. Normal 0 false false false EN-AU ZH-CN X-NONE

Ministerial formation of theological students through distance education

Directory of Open Access Journals (Sweden)

Marilyn Naidoo

2012-02-01

Full Text Available Ministerial formation is a multifaceted activity involving critical thinking, the acquisition of knowledge, skills development, religious identity formation and the development of ministerial and spiritual maturity expected of church ministers. Education is not merely the accumulation of a prescribed set of academic credits but includes the holistic formation of all aspects of the individual. However, theological educators are concerned about the capacity to foster such values and skills in the distance and electronic environment. Some see distance education as ‘distancing’ the students in more significant ways than simply geographic distance. These issues are of fundamental importance for they reflect the deeper convictions of theologians that distance education may not be a suitable medium for ministerial formation. This article creates a conceptual map of the theological and pedagogical challenges for ministerial formation and highlights how the possibility of formation is being carried out in the distance-learning environment.

Femtosecond frequency comb based distance measurement in air.

Science.gov (United States)

Balling, Petr; Kren, Petr; Masika, Pavel; van den Berg, S A

2009-05-25

Interferometric measurement of distance using a femtosecond frequency comb is demonstrated and compared with a counting interferometer displacement measurement. A numerical model of pulse propagation in air is developed and the results are compared with experimental data for short distances. The relative agreement for distance measurement in known laboratory conditions is better than 10(-7). According to the model, similar precision seems feasible even for long-distance measurement in air if conditions are sufficiently known. It is demonstrated that the relative width of the interferogram envelope even decreases with the measured length, and a fringe contrast higher than 90% could be obtained for kilometer distances in air, if optimal spectral width for that length and wavelength is used. The possibility of comb radiation delivery to the interferometer by an optical fiber is shown by model and experiment, which is important from a practical point of view.

Distance still matters. The hard reality of global expansion.

Science.gov (United States)

Ghemawat, P

2001-09-01

Companies routinely overestimate the attractiveness of foreign markets. Dazzled by the sheer size of untapped markets, they lose sight of the difficulties of pioneering new, often very different territories. The problem is rooted in the analytic tools (the most prominent being country portfolio analysis, or CPA) that managers use to judge international investments. By focusing on national wealth, consumer income, and people's propensity to consume, CPA emphasizes potential sales, ignoring the costs and risks of doing business in a new market. Most of these costs and risks result from the barriers created by distance. "Distance," however, does not refer only to geography; its other dimensions can make foreign markets considerably more or less attractive. The CAGE framework of distance presented here considers four attributes: cultural distance (religious beliefs, race, social norms, and language that are different for the target country and the country of the company considering expansion); administrative or political distance (colony-colonizer links, common currency, and trade arrangements); geographic distance (the physical distance between the two countries, the size of the target country, access to waterways and the ocean, internal topography, and transportation and communications infrastructures); and economic distance (disparities in the two countries' wealth or consumer income and variations in the cost and quality of financial and other resources). This framework can help to identify the ways in which potential markets may be distant from existing ones. The article explores how (and by how much) various types of distance can affect different types of industries and shows how dramatically an explicit consideration of distance can change a company's picture of its strategic options.

Distance Measurement Methods for Improved Insider Threat Detection

Directory of Open Access Journals (Sweden)

Owen Lo

2018-01-01

Full Text Available Insider threats are a considerable problem within cyber security and it is often difficult to detect these threats using signature detection. Increasing machine learning can provide a solution, but these methods often fail to take into account changes of behaviour of users. This work builds on a published method of detecting insider threats and applies Hidden Markov method on a CERT data set (CERT r4.2 and analyses a number of distance vector methods (Damerau–Levenshtein Distance, Cosine Distance, and Jaccard Distance in order to detect changes of behaviour, which are shown to have success in determining different insider threats.

Expected sliding distance of vertical slit caisson breakwater

Science.gov (United States)

Kim, Dong Hyawn

2017-06-01

Evaluating the expected sliding distance of a vertical slit caisson breakwater is proposed. Time history for the wave load to a vertical slit caisson is made. It consists of two impulsive wave pressures followed by a smooth sinusoidal pressure. In the numerical analysis, the sliding distance for an attack of single wave was shown and the expected sliding distance during 50 years was also presented. Those results were compared with a vertical front caisson breakwater without slit. It was concluded that the sliding distance of a vertical slit caisson may be over-estimated if the wave pressure on the caisson is evaluated without considering vertical slit.

The Viability of Distance Education Science Laboratories.

Science.gov (United States)

Forinash, Kyle; Wisman, Raymond

2001-01-01

Discusses the effectiveness of offering science laboratories via distance education. Explains current delivery technologies, including computer simulations, videos, and laboratory kits sent to students; pros and cons of distance labs; the use of spreadsheets; and possibilities for new science education models. (LRW)

Deep-Focusing Time-Distance Helioseismology

Science.gov (United States)

Duvall, T. L., Jr.; Jensen, J. M.; Kosovichev, A. G.; Birch, A. C.; Fisher, Richard R. (Technical Monitor)

2001-01-01

Much progress has been made by measuring the travel times of solar acoustic waves from a central surface location to points at equal arc distance away. Depth information is obtained from the range of arc distances examined, with the larger distances revealing the deeper layers. This method we will call surface-focusing, as the common point, or focus, is at the surface. To obtain a clearer picture of the subsurface region, it would, no doubt, be better to focus on points below the surface. Our first attempt to do this used the ray theory to pick surface location pairs that would focus on a particular subsurface point. This is not the ideal procedure, as Born approximation kernels suggest that this focus should have zero sensitivity to sound speed inhomogeneities. However, the sensitivity is concentrated below the surface in a much better way than the old surface-focusing method, and so we expect the deep-focusing method to be more sensitive. A large sunspot group was studied by both methods. Inversions based on both methods will be compared.

Evaluation of Distance Measures Between Gaussian Mixture Models of MFCCs

DEFF Research Database (Denmark)

Jensen, Jesper Højvang; Ellis, Dan P. W.; Christensen, Mads Græsbøll

2007-01-01

In music similarity and in the related task of genre classification, a distance measure between Gaussian mixture models is frequently needed. We present a comparison of the Kullback-Leibler distance, the earth movers distance and the normalized L2 distance for this application. Although...

Effect of a core-softened O-O interatomic interaction on the shock compression of fused silica

Science.gov (United States)

Izvekov, Sergei; Weingarten, N. Scott; Byrd, Edward F. C.

2018-03-01

Isotropic soft-core potentials have attracted considerable attention due to their ability to reproduce thermodynamic, dynamic, and structural anomalies observed in tetrahedral network-forming compounds such as water and silica. The aim of the present work is to assess the relevance of effective core-softening pertinent to the oxygen-oxygen interaction in silica to the thermodynamics and phase change mechanisms that occur in shock compressed fused silica. We utilize the MD simulation method with a recently published numerical interatomic potential derived from an ab initio MD simulation of liquid silica via force-matching. The resulting potential indicates an effective shoulder-like core-softening of the oxygen-oxygen repulsion. To better understand the role of the core-softening we analyze two derivative force-matching potentials in which the soft-core is replaced with a repulsive core either in the three-body potential term or in all the potential terms. Our analysis is further augmented by a comparison with several popular empirical models for silica that lack an explicit core-softening. The first outstanding feature of shock compressed glass reproduced with the soft-core models but not with the other models is that the shock compression values at pressures above 20 GPa are larger than those observed under hydrostatic compression (an anomalous shock Hugoniot densification). Our calculations indicate the occurrence of a phase transformation along the shock Hugoniot that we link to the O-O repulsion core-softening. The phase transformation is associated with a Hugoniot temperature reversal similar to that observed experimentally. With the soft-core models, the phase change is an isostructural transformation between amorphous polymorphs with no associated melting event. We further examine the nature of the structural transformation by comparing it to the Hugoniot calculations for stishovite. For stishovite, the Hugoniot exhibits temperature reversal and associated

THE EXTRAGALACTIC DISTANCE DATABASE

International Nuclear Information System (INIS)

Tully, R. Brent; Courtois, Helene M.; Jacobs, Bradley A.; Rizzi, Luca; Shaya, Edward J.; Makarov, Dmitry I.

2009-01-01

A database can be accessed on the Web at http://edd.ifa.hawaii.edu that was developed to promote access to information related to galaxy distances. The database has three functional components. First, tables from many literature sources have been gathered and enhanced with links through a distinct galaxy naming convention. Second, comparisons of results both at the levels of parameters and of techniques have begun and are continuing, leading to increasing homogeneity and consistency of distance measurements. Third, new material is presented arising from ongoing observational programs at the University of Hawaii 2.2 m telescope, radio telescopes at Green Bank, Arecibo, and Parkes and with the Hubble Space Telescope. This new observational material is made available in tandem with related material drawn from archives and passed through common analysis pipelines.

Quantum-limited heat conduction over macroscopic distances

Science.gov (United States)

Partanen, Matti; Tan, Kuan Yen; Govenius, Joonas; Lake, Russell E.; Mäkelä, Miika K.; Tanttu, Tuomo; Möttönen, Mikko

2016-05-01

The emerging quantum technological apparatuses, such as the quantum computer, call for extreme performance in thermal engineering. Cold distant heat sinks are needed for the quantized electric degrees of freedom owing to the increasing packaging density and heat dissipation. Importantly, quantum mechanics sets a fundamental upper limit for the flow of information and heat, which is quantified by the quantum of thermal conductance. However, the short distance between the heat-exchanging bodies in the previous experiments hinders their applicability in quantum technology. Here, we present experimental observations of quantum-limited heat conduction over macroscopic distances extending to a metre. We achieved this improvement of four orders of magnitude in the distance by utilizing microwave photons travelling in superconducting transmission lines. Thus, it seems that quantum-limited heat conduction has no fundamental distance cutoff. This work establishes the integration of normal-metal components into the framework of circuit quantum electrodynamics, which provides a basis for the superconducting quantum computer. Especially, our results facilitate remote cooling of nanoelectronic devices using faraway in situ-tunable heat sinks. Furthermore, quantum-limited heat conduction is important in contemporary thermodynamics. Here, the long distance may lead to ultimately efficient mesoscopic heat engines with promising practical applications.

A Distance Measure for Genome Phylogenetic Analysis

Science.gov (United States)

Cao, Minh Duc; Allison, Lloyd; Dix, Trevor

Phylogenetic analyses of species based on single genes or parts of the genomes are often inconsistent because of factors such as variable rates of evolution and horizontal gene transfer. The availability of more and more sequenced genomes allows phylogeny construction from complete genomes that is less sensitive to such inconsistency. For such long sequences, construction methods like maximum parsimony and maximum likelihood are often not possible due to their intensive computational requirement. Another class of tree construction methods, namely distance-based methods, require a measure of distances between any two genomes. Some measures such as evolutionary edit distance of gene order and gene content are computational expensive or do not perform well when the gene content of the organisms are similar. This study presents an information theoretic measure of genetic distances between genomes based on the biological compression algorithm expert model. We demonstrate that our distance measure can be applied to reconstruct the consensus phylogenetic tree of a number of Plasmodium parasites from their genomes, the statistical bias of which would mislead conventional analysis methods. Our approach is also used to successfully construct a plausible evolutionary tree for the γ-Proteobacteria group whose genomes are known to contain many horizontally transferred genes.

Multivariate Welch t-test on distances

OpenAIRE

Alekseyenko, Alexander V.

2016-01-01

Motivation: Permutational non-Euclidean analysis of variance, PERMANOVA, is routinely used in exploratory analysis of multivariate datasets to draw conclusions about the significance of patterns visualized through dimension reduction. This method recognizes that pairwise distance matrix between observations is sufficient to compute within and between group sums of squares necessary to form the (pseudo) F statistic. Moreover, not only Euclidean, but arbitrary distances can be used. This method...

INFORMATION PROVISION OF DISTANCE LEARNING SYSTEM

Directory of Open Access Journals (Sweden)

Viacheslav M. Oleksenko

2010-09-01

Full Text Available The article deals with the results of the research concerning the relevant information resources elaborated and introduced into the pedagogical process by the author. The peculiarities of the first in Ukraine dictionary on theory and practice of distance learning, distance course “Linear Algebra” and the course-book “Linear Algebra and Analytical Geometry”, which promote the raising in quality of education and training of specialists, are revealed.

The transposition distance for phylogenetic trees

OpenAIRE

Rossello, Francesc; Valiente, Gabriel

2006-01-01

The search for similarity and dissimilarity measures on phylogenetic trees has been motivated by the computation of consensus trees, the search by similarity in phylogenetic databases, and the assessment of clustering results in bioinformatics. The transposition distance for fully resolved phylogenetic trees is a recent addition to the extensive collection of available metrics for comparing phylogenetic trees. In this paper, we generalize the transposition distance from fully resolved to arbi...

Globalization, Distance Education and Hegemonic Futures

OpenAIRE

RUSSELL, Glenn

2015-01-01

ABSTRACT Consideration of the place of theory in distance education suggests that existing definitions do not adequately account for economic, cultural and historical factors. The application of the notion of hegemonic valency to distance education highlights the ways in which tools, technological systems and online environments operate in predictable ways. Historically, the imperatives of market forces and social justice have displayed a tension that is continued in contemporary contexts inc...

Regional variation in short distance homogamy

OpenAIRE

Haandrikman, Karen; van Wissen, Leo

2011-01-01

A third of all Dutch cohabiters choose a partner from the same municipality, so-called short distance homogamy. This article analyses the regional variation in this phenomenon, and it explains this variation in terms of geographical, socioeconomic, demographic and cultural determinants. Population register data on all new cohabiters in 2004 were used. Regression methods were employed to explain spatial patterns. Regional variation in short distance homogamy is largely explained by geographica...

Distance spectrum of Indu–Bala product of graphs

Directory of Open Access Journals (Sweden)

G. Indulal

2016-12-01

Full Text Available The D-eigenvalues μ1,μ2,…,μn of a graph G of order n are the eigenvalues of its distance matrix D and form the distance spectrum or D-spectrum of G denoted by SpecD(G. Let G1 and G2 be two regular graphs. The Indu–Bala product of G1 and G2 is denoted by G1▾G2 and is obtained from two disjoint copies of the join G1∨G2 of G1 and G2 by joining the corresponding vertices in the two copies of G2. In this paper we obtain the distance spectrum of G1▾G2 in terms of the adjacency spectra of G1 and G2. We use this result to obtain a new class of distance equienergetic graphs of diameter 3. We also prove that the class of graphs Kn¯▾Kn+1¯ has integral distance spectrum.

Dialect distances based on orthographic and phonetic transcriptions

CSIR Research Space (South Africa)

Zulu, N

2006-11-01

Full Text Available , where transcription segments were compared using the algorithm. In 2003 Gooskens and Heeringa [5] calculated Levenshtein distances between 15 Norwegian dialects and compared them to the distances as perceived by Norwegian listeners... by a clustering algorithm. Figure 2 illustrates the dendrogram derived from the clustering of perceptual distances as perceived by Norwegian listeners for the 15 Norwegian dialects investigated in this research [6]. Figure 2: Dendrogram...

What Does Electronic Conferencing Afford Distance Education?

Science.gov (United States)

Barnes, Sally

2000-01-01

Discusses the use of technology for distance learning in higher education and examines the similarities and differences between face-to-face seminars and online discussions. Considers the concept of affordance in relation to information and communication technologies and distance education; and examines affordances of electronic conferencing and…

Distance-driven projection and backprojection in three dimensions

International Nuclear Information System (INIS)

De Man, Bruno; Basu, Samit

2004-01-01

Projection and backprojection are operations that arise frequently in tomographic imaging. Recently, we proposed a new method for projection and backprojection, which we call distance-driven, and that offers low arithmetic cost and a highly sequential memory access pattern. Furthermore, distance-driven projection and backprojection avoid several artefact-inducing approximations characteristic of some other methods. We have previously demonstrated the application of this method to parallel and fan beam geometries. In this paper, we extend the distance-driven framework to three dimensions and demonstrate its application to cone beam reconstruction. We also present experimental results to demonstrate the computational performance, the artefact characteristics and the noise-resolution characteristics of the distance-driven method in three dimensions

Project-Based Collaborative Learning in Distance Education

DEFF Research Database (Denmark)

Knudsen, Morten; Bajard, C.; Helbo, Jan

2003-01-01

This article describes the experiences drawn from an experiment in transferring positive experience with a project-organised on-campus engineering programme to a technology supported distance education programme. Three years of experience with the Master of Industrial Information Technology (MII)......, didactic adjustments have been made based on feedback, in particular from evaluation questionnaires. This process has been very constructive in approaching the goal: a successful model for project organized learning in distance education.......) programme indicates, however, that adjustments are required in transforming the on-campus model to distance education. The main problem is that while project work is an excellent regulator of the learning process for on-campus students, this does not seem to be the case for off-campus students. Consequently......This article describes the experiences drawn from an experiment in transferring positive experience with a project-organised on-campus engineering programme to a technology supported distance education programme. Three years of experience with the Master of Industrial Information Technology (MII...

77 FR 27015 - Distance Learning and Telemedicine Grant Program

Science.gov (United States)

2012-05-08

... DEPARTMENT OF AGRICULTURE Rural Utilities Service Distance Learning and Telemedicine Grant Program AGENCY: Rural Utilities Service, USDA. ACTION: Notice of Funding for FY 2012 of the Distance Learning and... awards for its Distance Learning and Telemedicine (DLT) Grant Program. For Fiscal Year 2012, $15 million...

The representation of object distance: evidence from neuroimaging and neuropsychology

Directory of Open Access Journals (Sweden)

Marian Berryhill

2009-11-01

Full Text Available Perceived distance in two-dimensional images relies on monocular distance cues. Here, we examined the representation of perceived object distance using a continuous carry-over adaptation design for fMRI. The task was to look at photographs of objects and make a judgment as to whether or not the item belonged in the kitchen. Importantly, this task was orthogonal to the variable of interest: the object’s perceived distance from the viewer. In Experiment 1, whole brain group analyses identified bilateral clusters in the superior occipital gyrus (approximately area V3/V3A that showed parametric adaptation to relative changes in perceived distance. In Experiment 2, retinotopic analyses confirmed that area V3A/B reflected the greatest magnitude of response to monocular changes in perceived distance. In Experiment 3, we report that the functional activations overlap with the occipito-parietal lesions in a patient with impaired distance perception, showing that the same regions monitor implied (two-dimensional and actual (three-dimensional distance. These data suggest that distance information is automatically processed even when it is task-irrelevant and that this process relies on superior occipital areas in and around area V3A.

Performance Analysis of Reuse Distance in Cooperative Broadcasting

Directory of Open Access Journals (Sweden)

Jimmi Grönkvist

2016-01-01

Full Text Available Cooperative broadcasting is a promising technique for robust broadcast with low overhead and delay in mobile ad hoc networks. The technique is attractive for mission-oriented mobile communication, where a majority of the traffic is of broadcast nature. In cooperative broadcasting, all nodes simultaneously retransmit packets. The receiver utilizes cooperative diversity in the simultaneously received signals. The retransmissions continue until all nodes are reached. After the packet has traveled a specific number of hops out from the source, denoted as reuse distance, the source node transmits a new broadcast packet in the time slot used for the previous broadcast packet. If the reuse distance is too small, interference causes packet loss in intermediate nodes. In the literature, a reuse distance of three is common. With an analysis based on a realistic interference model and real terrain data, we show that a reuse distance of at least four is necessary to avoid packet loss in sparsely connected networks, especially for high spectral efficiencies. For frequency hopping, widely used in military systems, we propose a novel method. This method almost eliminates interference for a reuse distance of three, increasing the throughput by 33% compared to systems with a reuse distance of four.

Biomechanical considerations of distance kicking in Australian Rules football.

Science.gov (United States)

Ball, Kevin

2008-01-01

Kicking for distance in Australian Rules football is an important skill. Here, I examine technical aspects that contribute to achieving maximal kick distance. Twenty-eight elite players kicked for distance while being videoed at 500 Hz. Two-dimensional digitized data of nine body landmarks and the football were used to calculate kinematic parameters from kicking foot toe-off to the instant before ball contact. Longer kick distances were associated with greater foot speeds and shank angular velocities at ball contact, larger last step lengths, and greater distances from the ground when ball contact occurred. Foot speed, shank angular velocity, and ball position relative to the support foot at ball contact were included in the best regression predicting distance. A continuum of technique was evident among the kickers. At one end, kickers displayed relatively larger knee angular velocities and smaller thigh angular velocities at ball contact. At the other end, kickers produced relatively larger thigh angular velocities and smaller knee angular velocities at ball contact. To increase kicking distance, increasing foot speed and shank angular velocity at ball contact, increasing the last step length, and optimizing ball position relative to the ground and support foot are recommended.

Mahalanobis Distance Based Iterative Closest Point

DEFF Research Database (Denmark)

Hansen, Mads Fogtmann; Blas, Morten Rufus; Larsen, Rasmus

2007-01-01

the notion of a mahalanobis distance map upon a point set with associated covariance matrices which in addition to providing correlation weighted distance implicitly provides a method for assigning correspondence during alignment. This distance map provides an easy formulation of the ICP problem that permits...... a fast optimization. Initially, the covariance matrices are set to the identity matrix, and all shapes are aligned to a randomly selected shape (equivalent to standard ICP). From this point the algorithm iterates between the steps: (a) obtain mean shape and new estimates of the covariance matrices from...... the aligned shapes, (b) align shapes to the mean shape. Three different methods for estimating the mean shape with associated covariance matrices are explored in the paper. The proposed methods are validated experimentally on two separate datasets (IMM face dataset and femur-bones). The superiority of ICP...

Applying Leadership Theories to Distance Education Leadership

Science.gov (United States)

Nworie, John

2012-01-01

The instructional delivery mode in distance education has been transitioning from the context of a physical classroom environment to a virtual learning environment or maintaining a hybrid of the two. However, most distance education programs in dual mode institutions are situated in traditional face-to-face instructional settings. Distance…

Student and Faculty Issues in Distance Education.

Science.gov (United States)

Fender, David L.

Occupational safety and health faculty and occupational safety and health professionals (i.e., the potential audience for graduate level distance education programs) were surveyed to determine the considerations for a distance education-based graduate occupational safety and health program. Findings are reported related to the demand for distance…

Three short distance structures from quantum algebras

International Nuclear Information System (INIS)

Kempf, A.

1997-01-01

Known results are reviewed and new results are given on three types of short distance structures of observables which typically appear in studies of quantum group related algebras. In particular, one of the short distance structures is shown to suggest a new mechanism for the introduction of internal symmetries

Professional development of distance education professionals (DEPs)

African Journals Online (AJOL)

Firstly, the international and national ETD and distance education contexts are described for the purpose of benchmarking, and thereafter the TSA context is described and aligned to the benchmarks. Finally, a comparison is drawn between the proposed profile of ETD practitioners at a distance education institution and the ...

Nanoscale characterization of martensite structures in copper based shape memory alloys

Energy Technology Data Exchange (ETDEWEB)

Adiguzel, O, E-mail: oadiguzel@firat.edu.t [Firat University Department of Physics, 23169 Elazig (Turkey)

2010-11-01

Martensitic transformations are first order displacive transitions and occur in the materials on cooling from high temperature. Shape memory effect is an unusual property exhibited by certain alloy systems, and leads to martensitic transition. Copper-based alloys exhibit this property in beta phase field which possess simple bcc- structures, austenite structure at high-temperatures. As temperature is lowered the austenite undergoes martensitic transition following two ordering reactions, and structural changes in nanoscale govern this transition. Atomic movements are also confined to interatomic lengths in sub-{mu}m or angstrom scale in martensitic transformation. The formation of the layered structures in copper based alloys consists of shears and shear mechanism. Martensitic transformations occur in a few steps with the cooperative movement of atoms less than interatomic distances by means of lattice invariant shears on a {l_brace}110{r_brace} - type plane of austenite matrix which is basal plane or stacking plane of martensite. The lattice invariant shears occurs, in two opposite directions, <110> -type directions on the {l_brace}110{r_brace}-type plane. These shears gives rise to the formation of layered structure.

Development of critical thinking skills through distance learning in ...

African Journals Online (AJOL)

Interpersonal contact between the lecturers and students improves the development of critical thinking skills. The process is hampered by the geographical distance between the lecturers and the students in the case of distance education and learning. In many cases distance learning is, however, the only option.

Fixation distance and fixation duration to vertical road signs.

Science.gov (United States)

Costa, Marco; Simone, Andrea; Vignali, Valeria; Lantieri, Claudio; Palena, Nicola

2018-05-01

The distance of first-fixation to vertical road signs was assessed in 22 participants while driving a route of 8.34 km. Fixations to road signs were recorded by a mobile eye-movement-tracking device synchronized to GPS and kinematic data. The route included 75 road signs. First-fixation distance and fixation duration distributions were positively skewed. Median distance of first-fixation was 51 m. Median fixation duration was 137 ms with a modal value of 66 ms. First-fixation distance was linearly related to speed and fixation duration. Road signs were gazed at a much closer distance than their visibility distance. In a second study a staircase procedure was used to test the presentation-time threshold that lead to a 75% accuracy in road sign identification. The threshold was 35 ms, showing that short fixations to a road signs could lead to a correct identification. Copyright © 2018 Elsevier Ltd. All rights reserved.

TOPSIS with statistical distances: A new approach to MADM

Directory of Open Access Journals (Sweden)

Vijaya Babu Vommi

2017-01-01

Full Text Available Multiple attribute decision making (MADM methods are very useful in choosing the best alternative among the available finite but conflicting alternatives. TOPSIS is one of the MADM methods, which is simple in its methodology and logic. In TOPSIS, Euclidean distances of each alternative from the positive and negative ideal solutions are utilized to find the best alternative. In literature, apart from Euclidean distances, the city block distances have also been tried to find the separations measures. In general, the attribute data are distributed with unequal ranges and also possess moderate to high correlations. Hence, in the present paper, use of statistical distances is proposed in place of Euclidean distances. Procedures to find the best alternatives are developed using statistical and weighted statistical distances respectively. The proposed methods are illustrated with some industrial problems taken from literature. Results show that the proposed methods can be used as new alternatives in MADM for choosing the best solutions.

VCSEL-based sensors for distance and velocity

Science.gov (United States)

Moench, Holger; Carpaij, Mark; Gerlach, Philipp; Gronenborn, Stephan; Gudde, Ralph; Hellmig, Jochen; Kolb, Johanna; van der Lee, Alexander

2016-03-01

VCSEL based sensors can measure distance and velocity in three dimensional space and are already produced in high quantities for professional and consumer applications. Several physical principles are used: VCSELs are applied as infrared illumination for surveillance cameras. High power arrays combined with imaging optics provide a uniform illumination of scenes up to a distance of several hundred meters. Time-of-flight methods use a pulsed VCSEL as light source, either with strong single pulses at low duty cycle or with pulse trains. Because of the sensitivity to background light and the strong decrease of the signal with distance several Watts of laser power are needed at a distance of up to 100m. VCSEL arrays enable power scaling and can provide very short pulses at higher power density. Applications range from extended functions in a smartphone over industrial sensors up to automotive LIDAR for driver assistance and autonomous driving. Self-mixing interference works with coherent laser photons scattered back into the cavity. It is therefore insensitive to environmental light. The method is used to measure target velocity and distance with very high accuracy at distances up to one meter. Single-mode VCSELs with integrated photodiode and grating stabilized polarization enable very compact and cost effective products. Besides the well know application as computer input device new applications with even higher accuracy or for speed over ground measurement in automobiles and up to 250km/h are investigated. All measurement methods exploit the known VCSEL properties like robustness, stability over temperature and the potential for packages with integrated optics and electronics. This makes VCSEL sensors ideally suited for new mass applications in consumer and automotive markets.

Intimacy, Distance Relationships and Emotional Care

OpenAIRE

Holmes, Mary

2010-01-01

The social changes surrounding individualisation and globalization impact upon our emotional and intimate lives. Geographical mobility is especially significant and its effects on relationships much debated. Distance relationships are one example of how people respond to such changes. This paper is based on an ESRC funded qualitative study of couples in distance relationships. The argument is that such forms of loving are not all about self-satisfaction, although they may prompt reflexivity a...

The Changeable Block Distance System Analysis

Science.gov (United States)

Lewiński, Andrzej; Toruń, Andrzej

The paper treats about efficiency analysis in Changeable Block Distance (CBD) System connected with wireless positioning and control of train. The analysis is based on modeling of typical ERTMS line and comparison with actual and future traffic. The calculations are related to assumed parameters of railway traffic corresponding to real time - table of distance Psary - Góra Włodowska from CMK line equipped in classic, ETCS Level 1 and ETCS with CBD systems.

Safety distance between underground natural gas and water pipeline facilities

International Nuclear Information System (INIS)

Mohsin, R.; Majid, Z.A.; Yusof, M.Z.

2014-01-01

A leaking water pipe bursting high pressure water jet in the soil will create slurry erosion which will eventually erode the adjacent natural gas pipe, thus causing its failure. The standard 300 mm safety distance used to place natural gas pipe away from water pipeline facilities needs to be reviewed to consider accidental damage and provide safety cushion to the natural gas pipe. This paper presents a study on underground natural gas pipeline safety distance via experimental and numerical approaches. The pressure–distance characteristic curve obtained from this experimental study showed that the pressure was inversely proportional to the square of the separation distance. Experimental testing using water-to-water pipeline system environment was used to represent the worst case environment, and could be used as a guide to estimate appropriate safety distance. Dynamic pressures obtained from the experimental measurement and simulation prediction mutually agreed along the high-pressure water jetting path. From the experimental and simulation exercises, zero effect distance for water-to-water medium was obtained at an estimated horizontal distance at a minimum of 1500 mm, while for the water-to-sand medium, the distance was estimated at a minimum of 1200 mm. - Highlights: • Safe separation distance of underground natural gas pipes was determined. • Pressure curve is inversely proportional to separation distance. • Water-to-water system represents the worst case environment. • Measured dynamic pressures mutually agreed with simulation results. • Safe separation distance of more than 1200 mm should be applied

Psychological influences on distance estimation in a virtual reality environment

Directory of Open Access Journals (Sweden)

Kohske eTakahashi

2013-09-01

Full Text Available Researches on embodied perception have revealed that social, psychological and physiological factors influence perception of space. While many of these influences were observed with real or highly realistic stimuli, the present work showed that even the orientation of abstract geometric objects with a non-realistic virtual environment could influence distance perception. Observers wore a head mounted display and watched virtual cones moving within an invisible cube for five seconds with their head movement recorded. Subsequently, observers estimated the distance to the cones or evaluated their friendliness. The cones either faced the observer, a target behind the cones, or random orientations. Average viewing distance to the cones varied between 1.2 and 2.0 m. At a viewing distance of 1.6 m, observers perceived cones facing them as closer than cones facing an opposite target or random orientations. Furthermore, irrespective of viewing distance, observers moved their head away from the cones more strongly and evaluated the cones as less friendly when the cones were facing observers. Similar results of distance estimation were obtained with a 3D projection onto a large screen, although the effective viewing distance was farther away. These results suggest that factors other than physical distance could influence distance perception even with non-realistic geometric objects within a virtual environment. Furthermore, the modulation of distance perception was also accompanied by changes in subjective impression and avoidance movement. We propose that cones facing an observer are perceived as socially discomforting or threatening and potentially violate an observer’s personal space, which might influence the perceived distance of cones.

The HST Key Project on the Extragalactic Distance Scale. XV. A Cepheid Distance to the Fornax Cluster and Its Implications

OpenAIRE

Madore, Barry F.; Freedman, Wendy L.; Silbermann, N.; Harding, Paul; Huchra, John; Mould, Jeremy; Graham, John; Ferrarese, Laura; Gibson, Brad; Han, Mingsheng; Hoessel, John; Hughes, Shaun; Illingworth, Garth; Phelps, Randy; Sakai, Shoko

1998-01-01

Using the Hubble Space Telescope (HST) 37 long-period Cepheid variables have been discovered in the Fornax Cluster spiral galaxy NGC 1365. The resulting V and I period-luminosity relations yield a true distance modulus of 31.35 +/- 0.07 mag, which corresponds to a distance of 18.6 +/- 0.6 Mpc. This measurement provides several routes for estimating the Hubble Constant. (1) Assuming this distance for the Fornax Cluster as a whole yields a local Hubble Constant of 70 +/-18_{random} [+/-7]_{syst...

Transforming distance education curricula through distributive leadership

Directory of Open Access Journals (Sweden)

Mike Keppell

2010-12-01

Full Text Available This paper examines a core leadership strategy for transforming learning and teaching in distance education through flexible and blended learning. It focuses on a project centred on distributive leadership that involves collaboration, shared purpose, responsibility and recognition of leadership irrespective of role or position within an organisation. Distributive leadership was a core principle in facilitating the transformation of learning and teaching through a Teaching Fellowship Scheme that empowered leaders across a regional distance education university. In parallel, a design-based research project analysed the perceptions of the Teaching Fellows in relation to blended learning, time/space, peer learning, innovation and equity issues in relation to distance education.

Distance Education Leaders in Latin America and the Caribbean

Science.gov (United States)

Torres, Patrícia Lupion; Rama, Claudio

2018-01-01

Distance higher education has only relatively recently been established in some Latin American countries, as part of wider higher education reforms. The developments of distance education have been the result of sustained efforts of leading thinkers and practitioners in the region. In this article, several leading distance education professionals…

Distance between configurations in Markov chain Monte Carlo simulations

Science.gov (United States)

Fukuma, Masafumi; Matsumoto, Nobuyuki; Umeda, Naoya

2017-12-01

For a given Markov chain Monte Carlo algorithm we introduce a distance between two configurations that quantifies the difficulty of transition from one configuration to the other configuration. We argue that the distance takes a universal form for the class of algorithms which generate local moves in the configuration space. We explicitly calculate the distance for the Langevin algorithm, and show that it certainly has desired and expected properties as distance. We further show that the distance for a multimodal distribution gets dramatically reduced from a large value by the introduction of a tempering method. We also argue that, when the original distribution is highly multimodal with large number of degenerate vacua, an anti-de Sitter-like geometry naturally emerges in the extended configuration space.

SEAT CHOICE AND DISTANCE JUDGMENT IN PUBLIC SPACES (1).

Science.gov (United States)

Neto, Olavo Avalone; Munakata, Jun

2015-10-01

This research assessed whether public space users will adopt a least-effort approach and choose a less suitable seat nearby or seek the most suitable seat, even if it is farther away from them when the decision is made. How distance assessment affects seat choice was investigated through an observational survey, which allowed the identification of behavioral patterns. Those behavioral patterns were then tested in a paired comparison experiment with 40 participants. The results showed that the effect of distance on seat choice is related to the difference in distance between the options and that a sufficient difference can cause trade-offs between distance and seat properties. The necessary difference in distance is conditioned by the activity and the seat properties.

36 CFR 13.1206 - Wildlife distance conditions.

Science.gov (United States)

2010-07-01

... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false Wildlife distance conditions. 13.1206 Section 13.1206 Parks, Forests, and Public Property NATIONAL PARK SERVICE, DEPARTMENT OF THE... Provisions § 13.1206 Wildlife distance conditions. (a) Approaching a bear or any large mammal within 50 yards...

36 CFR 13.604 - Wildlife distance conditions.

Science.gov (United States)

2010-07-01

... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false Wildlife distance conditions. 13.604 Section 13.604 Parks, Forests, and Public Property NATIONAL PARK SERVICE, DEPARTMENT OF THE... § 13.604 Wildlife distance conditions. (a) Approaching a bear or any large mammal within 50 yards is...

Distance Education for People with Visual Impairments

Science.gov (United States)

Liakou, Maria; Manousou, Evaggelia

2015-01-01

This paper studies the standards of higher Distance Education, focusing on the Hellenic Open University, for people who have visual impairments, so that it becomes fully accessible and thus helps reduce social exclusion. Specifically, it aims to study the operational context of Distance Education, the possibilities that modern technology provides…

Edit Distance to Monotonicity in Sliding Windows

DEFF Research Database (Denmark)

Chan, Ho-Leung; Lam, Tak-Wah; Lee, Lap Kei

2011-01-01

Given a stream of items each associated with a numerical value, its edit distance to monotonicity is the minimum number of items to remove so that the remaining items are non-decreasing with respect to the numerical value. The space complexity of estimating the edit distance to monotonicity of a ...

Why Do Long-Distance Travelers Have Improved Pancreatectomy Outcomes?

Science.gov (United States)

Jindal, Manila; Zheng, Chaoyi; Quadri, Humair S; Ihemelandu, Chukwuemeka U; Hong, Young K; Smith, Andrew K; Dudeja, Vikas; Shara, Nawar M; Johnson, Lynt B; Al-Refaie, Waddah B

2017-08-01

Centralization of complex surgical care has led patients to travel longer distances. Emerging evidence suggested a negative association between increased travel distance and mortality after pancreatectomy. However, the reason for this association remains largely unknown. We sought to unravel the relationships among travel distance, receiving pancreatectomy at high-volume hospitals, delayed surgery, and operative outcomes. We identified 44,476 patients who underwent pancreatectomy for neoplasms between 2004 and 2013 at the reporting facility from the National Cancer Database. Multivariable analyses were performed to examine the independent relationships between increments in travel distance mortality (30-day and long-term survival) after adjusting for patient demographics, comorbidity, cancer stage, and time trend. We then examined how additional adjustment of procedure volume affected this relationship overall and among rural patients. Median travel distance to undergo pancreatectomy increased from 16.5 to 18.7 miles (p for trend pancreatectomy, it was also related to higher odds of receiving pancreatectomy at a high-volume hospital and lower postoperative mortality. In multivariable analysis, difference in mortality among patients with varying travel distance was attenuated by adjustment for procedure volume. However, longest travel distance was still associated with a 77% lower 30-day mortality rate than shortest travel among rural patients, even when accounting for procedure volume. Our large national study found that the beneficial effect of longer travel distance on mortality after pancreatectomy is mainly attributable to increase in procedure volume. However, it can have additional benefits on rural patients that are not explained by volume. Distance can represent a surrogate for rural populations. Copyright © 2017 American College of Surgeons. Published by Elsevier Inc. All rights reserved.

Unified treatment of the luminosity distance in cosmology

International Nuclear Information System (INIS)

Yoo, Jaiyul; Scaccabarozzi, Fulvio

2016-01-01

Comparing the luminosity distance measurements to its theoretical predictions is one of the cornerstones in establishing the modern cosmology. However, as shown in Biern and Yoo, its theoretical predictions in literature are often plagued with infrared divergences and gauge-dependences. This trend calls into question the sanity of the methods used to derive the luminosity distance. Here we critically investigate four different methods—the geometric approach, the Sachs approach, the Jacobi mapping approach, and the geodesic light cone (GLC) approach to modeling the luminosity distance, and we present a unified treatment of such methods, facilitating the comparison among the methods and checking their sanity. All of these four methods, if exercised properly, can be used to reproduce the correct description of the luminosity distance.

Unified treatment of the luminosity distance in cosmology

Energy Technology Data Exchange (ETDEWEB)

Yoo, Jaiyul; Scaccabarozzi, Fulvio, E-mail: jyoo@physik.uzh.ch, E-mail: fulvio@physik.uzh.ch [Center for Theoretical Astrophysics and Cosmology, Institute for Computational Science, University of Zürich, Zürich (Switzerland)

2016-09-01

Comparing the luminosity distance measurements to its theoretical predictions is one of the cornerstones in establishing the modern cosmology. However, as shown in Biern and Yoo, its theoretical predictions in literature are often plagued with infrared divergences and gauge-dependences. This trend calls into question the sanity of the methods used to derive the luminosity distance. Here we critically investigate four different methods—the geometric approach, the Sachs approach, the Jacobi mapping approach, and the geodesic light cone (GLC) approach to modeling the luminosity distance, and we present a unified treatment of such methods, facilitating the comparison among the methods and checking their sanity. All of these four methods, if exercised properly, can be used to reproduce the correct description of the luminosity distance.

Spin physics and inclusive processes at short distances

International Nuclear Information System (INIS)

Craigie, N.S.

1982-10-01

The following aspects of spin physics at short distances are studied: 1. the factorization theorem in perturbative QCD and helicity asymmetries in inclusive processes, 2. the effect of higher order radiative corrections on helicity asymmetries, 3. the higher order power mechanism and spin asymmetries, 4. difficulties in understanding transverse spin in perturbative QCD, 5. helicity asymmetries of short distances as a means of recognizing supersymmetric interactions. Experiments are suggested for the verification of theoretical conclusions. Although spin-physics at short distances is difficult to demonstrate experimentally it may provide a valuable tool to show how perturbative QCD operates in the presence of the non-perturbative hadronic structure. It may also prove valuable to show new interactions which might occur at very short distances

Support Services for Distance Education

Directory of Open Access Journals (Sweden)

Sandra Frieden

1999-01-01

Full Text Available The creation and operation of a distance education support infrastructure requires the collaboration of virtually all administrative departments whose activities deal with students and faculty, and all participating academic departments. Implementation can build on where the institution is and design service-oriented strategies that strengthen institutional support and commitment. Issues to address include planning, faculty issues and concerns, policies and guidelines, approval processes, scheduling, training, publicity, information-line operations, informational materials, orientation and registration processes, class coordination and support, testing, evaluations, receive site management, partnerships, budgets, staffing, library and e-mail support, and different delivery modes (microwave, compressed video, radio, satellite, public television/cable, video tape and online. The process is ongoing and increasingly participative as various groups on campus begin to get involved with distance education activities. The distance education unit must continuously examine and revise its processes and procedures to maintain the academic integrity and service excellence of its programs. It’s a daunting prospect to revise the way things have been done for many years, but each department has an opportunity to respond to new ways of serving and reaching students.

Teaching Chemistry via Distance Education

Science.gov (United States)

Boschmann, Erwin

2003-06-01

This paper describes a chemistry course taught at Indiana University Purdue University, Indianapolis via television, with a Web version added later. The television format is a delivery technology; the Web is an engagement technology and is preferred since it requires student participation. The distance-laboratory component presented the greatest challenge since laboratories via distance education are not a part of the U.S. academic culture. Appropriate experiments have been developed with the consultation of experts from The Open University in the United Kingdom, Athabasca University in Canada, and Monash University in Australia. The criteria used in the development of experiments are: (1) they must be credible academic experiences equal to or better than those used on campus, (2) they must be easy to perform without supervision, (3) they must be safe, and (4) they must meet all legal requirements. An evaluation of the program using three different approaches is described. The paper concludes that technology-mediated distance education students do as well as on-campus students, but drop out at a higher rate. It is very important to communicate with students frequently, and technology tools ought to be used only if good pedagogy is enhanced by their use.

Time-Distance Helioseismology: Noise Estimation

Science.gov (United States)

Gizon, L.; Birch, A. C.

2004-10-01

As in global helioseismology, the dominant source of noise in time-distance helioseismology measurements is realization noise due to the stochastic nature of the excitation mechanism of solar oscillations. Characterizing noise is important for the interpretation and inversion of time-distance measurements. In this paper we introduce a robust definition of travel time that can be applied to very noisy data. We then derive a simple model for the full covariance matrix of the travel-time measurements. This model depends only on the expectation value of the filtered power spectrum and assumes that solar oscillations are stationary and homogeneous on the solar surface. The validity of the model is confirmed through comparison with SOHO MDI measurements in a quiet-Sun region. We show that the correlation length of the noise in the travel times is about half the dominant wavelength of the filtered power spectrum. We also show that the signal-to-noise ratio in quiet-Sun travel-time maps increases roughly as the square root of the observation time and is at maximum for a distance near half the length scale of supergranulation.

Planning with Reachable Distances

KAUST Repository

Tang, Xinyu; Thomas, Shawna; Amato, Nancy M.

2009-01-01

reachable distance space (RD-space), in which all configurations lie in the set of constraint-satisfying subspaces. This enables us to directly sample the constrained subspaces with complexity linear in the robot's number of degrees of freedom. In addition

Where does distance matter? Distance to the closest maternity unit and risk of foetal and neonatal mortality in France.

Science.gov (United States)

Pilkington, Hugo; Blondel, Béatrice; Drewniak, Nicolas; Zeitlin, Jennifer

2014-12-01

The number of maternity units has declined in France, raising concerns about the possible impact of increasing travel distances on perinatal health outcomes. We investigated impact of distance to closest maternity unit on perinatal mortality. Data from the French National Vital Statistics Registry were used to construct foetal and neonatal mortality rates over 2001-08 by distance from mother's municipality of residence and the closest municipality with a maternity unit. Data from French neonatal mortality certificates were used to compute neonatal death rates after out-of-hospital birth. Relative risks by distance were estimated, adjusting for individual and municipal-level characteristics. Seven percent of births occurred to women residing at ≥30 km from a maternity unit and 1% at ≥45 km. Foetal and neonatal mortality rates were highest for women living at maternity unit. For foetal mortality, rates increased at ≥45 km compared with 5-45 km. In adjusted models, long distance to a maternity unit had no impact on overall mortality but women living closer to a maternity unit had a higher risk of neonatal mortality. Neonatal deaths associated with out-of-hospital birth were rare but more frequent at longer distances. At the municipal-level, higher percentages of unemployment and foreign-born residents were associated with increased mortality. Overall mortality was not associated with living far from a maternity unit. Mortality was elevated in municipalities with social risk factors and located closest to a maternity unit, reflecting the location of maternity units in deprived areas with risk factors for poor outcome. © The Author 2014. Published by Oxford University Press on behalf of the European Public Health Association.

Factors that motivate and deter rehabilitation educators from participating in distance education.

Science.gov (United States)

Edwards, Yolanda V

2004-01-01

The major purpose of the study was to conduct exploratory research on the motivational levels of rehabilitation educators whose programs have Comprehensive Service Personnel Development (CSPD; Department of Education grant) grants targeted toward distance education. Additionally, the study attempted to identify whether significant factors existed that would inhibit faculty participation in distance education. There were three research questions to examine: (a) Do distance educators and non-distance educators differ significantly in intrinsic motivational factors? (b) Do distance educators and non-distance educators differ significantly in extrinsic motivational factors? and (c) Do distance educators and non-distance educators differ significantly in inhibiting factors? The results showed that rehabilitation faculty with CSPD grants who are distance educators are more extrinsically motivated (such as increase in salary, monetary support for participation, job security, working conditions, technical support, and requirement by department) than non-distance educators. There were no significant differences in levels between distance educators and non-distance educators that are intrinsically motivated (scholarly pursuit, personal research tool, and job satisfaction). There was no significant difference between distance educators and non-distance educators in inhibiting factors.

36 CFR 13.920 - Wildlife distance conditions.

Science.gov (United States)

2010-07-01

... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false Wildlife distance conditions... Provisions § 13.920 Wildlife distance conditions. (a) Bears. The following are prohibited: (1) Approaching within 300 yards of a bear; or (2) Engaging in photography within 300 yards of a bear. (b) Other wildlife...

Increasing Access and Relevance in Distance Education

Science.gov (United States)

Mendenhall, Robert W.

2009-01-01

Access to higher education is subject to many factors including affordability, time and geography. Distance education can deliver education to those that live far from a campus. Some of that distance education may be synchronous, or live, requiring students to be available at certain times. Flexibility and access are increased when the instruction…

Impact of Information and Communication Technology on Distance ...

African Journals Online (AJOL)

Impact of Information and Communication Technology on Distance Education: The case of National Open University of Nigeria. ... greater positive impacts on distance education enhancing academic success; that the National Open University ...

Psychological influences on distance estimation in a virtual reality environment.

Science.gov (United States)

Takahashi, Kohske; Meilinger, Tobias; Watanabe, Katsumi; Bülthoff, Heinrich H

2013-01-01

Studies of embodied perception have revealed that social, psychological, and physiological factors influence space perception. While many of these influences were observed with real or highly realistic stimuli, the present work showed that even the orientation of abstract geometric objects in a non-realistic virtual environment could influence distance perception. Observers wore a head mounted display and watched virtual cones moving within an invisible cube for 5 s with their head movement recorded. Subsequently, the observers estimated the distance to the cones or evaluated their friendliness. The cones either faced the observer, a target behind the cones, or were oriented randomly. The average viewing distance to the cones varied between 1.2 and 2.0 m. At a viewing distance of 1.6 m, the observers perceived the cones facing them as closer than the cones facing a target in the opposite direction, or those oriented randomly. Furthermore, irrespective of the viewing distance, observers moved their head away from the cones more strongly and evaluated the cones as less friendly when the cones faced the observers. Similar distance estimation results were obtained with a 3-dimensional projection onto a large screen, although the effective viewing distances were farther away. These results suggest that factors other than physical distance influenced distance perception even with non-realistic geometric objects in a virtual environment. Furthermore, the distance perception modulation was accompanied by changes in subjective impression and avoidance movement. We propose that cones facing an observer are perceived as socially discomforting or threatening, and potentially violate an observer's personal space, which might influence the perceived distance of cones.

The Bifixation Field as a Function of Viewing Distance

Directory of Open Access Journals (Sweden)

Philip M. Grove

2014-01-01

Full Text Available Hering reported that the area over which he could bifixate a target was smaller at near convergence distances than far convergence distances and predicted that in extreme horizontal gaze positions, the temporally directed eye lags behind the nasally directed eye. We tested these predictions using a subjective index of eye position. Experiment  1 confirmed that the bifixation field was significantly smaller at near convergence distances. When bifixation broke down at the near distance, the nasally directed eye lagged behind the temporally directed eye for all observers. At the far distance, the nasally directed eye preceded the temporally directed eye for four of six observers. Experiment  2 also confirmed that the bifixation field was smaller at near convergence distances but the nasally directed eye always lagged behind the temporally directed eye at the limits of the bifixation field. We confirmed Hering’s first prediction that the bifixation field is smaller at near convergence distances than at far ones. However, the majority of our results indicate that the nasally directed eye lags behind the temporally directed eye at the limits of the bifixation field, contrary to Hering’s prediction. We conclude that the eyes drift toward their tonic state of vergence when fusion breaks.

A Unimodal Model for Double Observer Distance Sampling Surveys.

Directory of Open Access Journals (Sweden)

Earl F Becker

Full Text Available Distance sampling is a widely used method to estimate animal population size. Most distance sampling models utilize a monotonically decreasing detection function such as a half-normal. Recent advances in distance sampling modeling allow for the incorporation of covariates into the distance model, and the elimination of the assumption of perfect detection at some fixed distance (usually the transect line with the use of double-observer models. The assumption of full observer independence in the double-observer model is problematic, but can be addressed by using the point independence assumption which assumes there is one distance, the apex of the detection function, where the 2 observers are assumed independent. Aerially collected distance sampling data can have a unimodal shape and have been successfully modeled with a gamma detection function. Covariates in gamma detection models cause the apex of detection to shift depending upon covariate levels, making this model incompatible with the point independence assumption when using double-observer data. This paper reports a unimodal detection model based on a two-piece normal distribution that allows covariates, has only one apex, and is consistent with the point independence assumption when double-observer data are utilized. An aerial line-transect survey of black bears in Alaska illustrate how this method can be applied.

Endurance and age : evidence from long-distance running data

NARCIS (Netherlands)

Sterken, Elmer

2001-01-01

This paper analyzes the impact of aging on long-run endurance. We analyze the determinants of running speed on distances from 5K to the marathon. We model running speed as a function of distance, age, and sex. We find evidence for interaction between age and sex, but not between distance and sex.

Application of Technology in Project-Based Distance Learning

Directory of Open Access Journals (Sweden)

Ali Mehrabian

2008-06-01

Full Text Available Present technology and the accessibility of internet have made distance learning easier, more efficient, and more convenient for students. This technology allows instructors and students to communicate asynchronously, at times and locations of their own choosing, by exchanging printed or electronic information. The use of project-based approach is being recognized in the literature as a potential component of courses in the faculties of engineering, science, and technology. Instructors may have to restructure their course differently to accommodate and facilitate the effectiveness of distance learning. A project-based engineering course, traditionally taught in a classroom settings using live mode at the College of Engineering and Computer Sciences at the University of Central Florida (UCF has been transformed to a distance course taught using distance modes. In this case, pedagogical transitions and adjustments are required, in particular for obtaining an optimal balance between the course material and the project work. Project collaboration in groups requires communication, which is possible with extensive utilization of new information and communication technology, such as virtual meetings. This paper discusses the course transition from live to distance modes and touches on some issues as they relate to the effectiveness of this methodology and the lessons learned from its application within different context. More specifically, this discussion includes the benefit of implementing project-based work in the domain of the distance learning courses.

Complex networks in the Euclidean space of communicability distances

Science.gov (United States)

Estrada, Ernesto

2012-06-01

We study the properties of complex networks embedded in a Euclidean space of communicability distances. The communicability distance between two nodes is defined as the difference between the weighted sum of walks self-returning to the nodes and the weighted sum of walks going from one node to the other. We give some indications that the communicability distance identifies the least crowded routes in networks where simultaneous submission of packages is taking place. We define an index Q based on communicability and shortest path distances, which allows reinterpreting the “small-world” phenomenon as the region of minimum Q in the Watts-Strogatz model. It also allows the classification and analysis of networks with different efficiency of spatial uses. Consequently, the communicability distance displays unique features for the analysis of complex networks in different scenarios.

Matrimonial distance, inbreeding coefficient and population size: Dhangar data.

Science.gov (United States)

Majumder, P P; Malhotra, K C

1979-01-01

Data on the distance between the birthplaces of spouses (matrimonial distance) were collected from 2,260 married individuals belonging to 21 endogamous castes of the Dhangar (shepherd) cast-cluster of Maharashtra, India. The general form of the distribution of matrimonial distances is one which is extremely positively skewed and leptokurtic. The percentage of intra-village marriages generally decreases from the southern areas of Maharashtra to the northern areas of the state, as does the inbreeding coefficient. This situation is in conformity with the socio-cultural norms regulating matrimonial choice in south and north India. An attempt has been made to relate the degree of inbreeding to the mean matrimonial distance and population size. The mean matrimonial distance is more useful in predicting the degree of inbreeding than population size.

Species turnover and geographic distance in an urban river network

DEFF Research Database (Denmark)

Rouquette, James R.; Dallimer, Martin; Armsworth, Paul R.

2013-01-01

AimUnderstanding the relationships between species turnover, environmental features and the geographic distance between sites can provide important insights into the processes driving species diversity. This is particularly relevant where the effective distance between sites may be a function...... patterns of species turnover and to determine whether these patterns differ between different taxonomic groups. LocationSheffield area, UK. MethodsAquatic (macroinvertebrates, diatoms) and terrestrial (birds, plants, butterflies) organisms were surveyed at 41 sites across an urban river network. We...... of the geographic distance measures, although network distance remained significant for birds and some plant groups after removing the effect of environmental distance. Water-dispersed and neophyte plant groups were significantly related to network and flow distance. Main conclusionsThe results suggest that aquatic...

Diffraction study on the nonstoichiometric α-U2N3+x phase

International Nuclear Information System (INIS)

Serizawa, H.; Fukuda, K.; Ishii, Y.; Funahashi, S.; Katsura, M.

1993-01-01

X-ray and neutron diffraction studies were performed on nonstoichiometric α-U 2 N 3+ x having a composition range 1.68 2 N 3+x in this composition range was distorted Mn 2 O 3 -type. Structure parameters of U and N atoms were determined. The results showed that positions of U atoms varied continuously with nitrogen content. No evidence of the modification from bcc to fcc could be obtained. Interatomic distances of U-U and U-N were determined. The position parameter of N atoms showed that N atoms were slightly deviated from the tetrahedral site. (author)

X-ray absorption spectroscopy in the keV range with laser generated high harmonic radiation

International Nuclear Information System (INIS)

Seres, Enikoe; Seres, Jozsef; Spielmann, Christian

2006-01-01

By irradiating He and Ne atoms with 3 mJ, 12 fs, near infrared laser pulses from a tabletop laser system, the authors generated spatially and temporally coherent x rays up to a photon energy of 3.5 keV. With this source it is possible to use high-harmonic radiation for x-ray absorption spectroscopy in the keV range. They were able to clearly resolve the L absorption edges of titanium and copper and the K edges of aluminum and silicon. From the fine structure of the x-ray absorption they estimated the interatomic distances

Study on the Ni Mo alloy nano crystals

International Nuclear Information System (INIS)

Goncalves, Lidice A. Pereira; Pontes, Luiz Renato de Araujo

1996-01-01

Materials with nanocrystalline microstructures are solids that contain such a high density of defects, with the spacings between neighboring defects approaching interatomic distances. As result, nanocrystalline solids exhibit physical and chemical properties different from those usually found in normal crystalline s or amorphous materials with the same chemical composition. In this work, the nanocrystalline Ni Mo alloy was prepared by melt-spinning method. The novelly synthesized nanocrystalline Ni Mo alloy was characterized by X-ray diffraction (XRD), differential scanning calorimetry (D S C) and microscopy. The estimated average crystalline size by the Debye-Scherrer formulas was 20 nm. (author)

Digital Competence Model of Distance Learning Students

Science.gov (United States)

da Silva, Ketia Kellen A.; Behar, Patricia A.

2017-01-01

This article presents the development of a digital competency model of Distance Learning (DL) students in Brazil called CompDigAl_EAD. The following topics were addressed in this study: Educational Competences, Digital Competences, and Distance Learning students. The model was developed between 2015 and 2016 and is being validated in 2017. It was…

VIRTUAL LEADERSHIP AT DISTANCE EDUCATION TEAMS

Directory of Open Access Journals (Sweden)

Meltem KUSCU

2016-07-01

Full Text Available Globalization being one of the most popular terms of recent years is considered as a factor changing the operation styles of the companies. Companies and universities opened up to the world with the globalization and as a result of it, they had the opportunity of being a world brand. Now, some companies have affiliated companies in almost every country. Well, if we think about time and place difference how do these companies lead the affiliated companies in various locations of the world? This question resulted in the new leadership approach, virtual leadership. The process of distance learning beginning with newspaper advertisement appears as virtual learning now. A number of companies and universities provide distance learning classes and in-service training in virtual platform via Internet. These trainings provided independently from time and space are conducted in a country and worldwide sometimes. If we consider individuals in different time and environments as virtual teams, dealing with these virtual teams is the duty of virtual leader. The purpose of this study is to examine virtual leadership perception of distance learning teams. Three trivets are in question for distance learning teams. The first one is the academicians lecturing the second one is the students and the third one is coordinator and technical support team. Perceptions of virtual leader of the said three groups were examined individually in this study.

Efficient Communication Protocols for Deciding Edit Distance

DEFF Research Database (Denmark)

Jowhari, Hossein

2012-01-01

In this paper we present two communication protocols on computing edit distance. In our first result, we give a one-way protocol for the following Document Exchange problem. Namely given x ∈ Σn to Alice and y ∈ Σn to Bob and integer k to both, Alice sends a message to Bob so that he learns x...... or truthfully reports that the edit distance between x and y is greater than k. For this problem, we give a randomized protocol in which Alice transmits at most O ˜ (klog 2 n) bits and each party’s time complexity is O ˜ (nlogn+k 2 log 2 n) . Our second result is a simultaneous protocol for edit distance over...... permutations. Here Alice and Bob both send a message to a third party (the referee) who does not have access to the input strings. Given the messages, the referee decides if the edit distance between x and y is at most k or not. For this problem we give a protocol in which Alice and Bob run a O...

Use of Distance Education in Dental Hygiene Programs.

Science.gov (United States)

Grimes, Ellen B.

2002-01-01

Surveyed dental hygiene programs to determine the prevalence of distance education use. Found that 22 percent have distance education, and that most were satisfied with it as an adequate alternative to traditional approaches. (EV)

Revival and robustness of Bures distance discord under decoherence channels

International Nuclear Information System (INIS)

Shi, Jia-dong; Wang, Dong; Ma, Yang-cheng; Ye, Liu

2016-01-01

In this paper, we demonstrate the revival and robustness of Bures distance discord in comparison with entanglement under local decoherent evolutions. The results show that in depolarizing channel Bures distance discord revives after a dark point of time, while entanglement will damp into death without revival. In addition, in hybrid channel the declining initial condition can enable Bures distance discord to decay more smoothly within a limited time, but speed up the death of entanglement. In this sense, Bures distance discord is typically more robust against decoherence than entanglement. Furthermore, we also provide a geometric interpretation concerning these phenomena. - Highlights: • Bures distance discord is more robust against decoherence than entanglement. • Bures distance discord revives after a dark point of time, while entanglement damps to death. • The initial condition enables Bures distance discord to damp smoothly, but it speeds up the death of entanglement. • A geometric interpretation concerning these phenomena has been provided.

Perception of Egocentric Distance during Gravitational Changes in Parabolic Flight.

Directory of Open Access Journals (Sweden)

Gilles Clément

Full Text Available We explored the effect of gravity on the perceived representation of the absolute distance of objects to the observers within the range from 1.5-6 m. Experiments were performed on board the CNES Airbus Zero-G during parabolic flights eliciting repeated exposures to short periods of microgravity (0 g, hypergravity (1.8 g, and normal gravity (1 g. Two methods for obtaining estimates of perceived egocentric distance were used: verbal reports and visually directed motion toward a memorized visual target. For the latter method, because normal walking is not possible in 0 g, blindfolded subjects translated toward the visual target by pulling on a rope with their arms. The results showed that distance estimates using both verbal reports and blind pulling were significantly different between normal gravity, microgravity, and hypergravity. Compared to the 1 g measurements, the estimates of perceived distance using blind pulling were shorter for all distances in 1.8 g, whereas in 0 g they were longer for distances up to 4 m and shorter for distances beyond. These findings suggest that gravity plays a role in both the sensorimotor system and the perceptual/cognitive system for estimating egocentric distance.

Distance Learning: A Way of Life-Long Learning

National Research Council Canada - National Science Library

Belanich, James; Moses, Franklin L; Orvis, Kara L

2005-01-01

... the predominant form of distance learning today, and will likely continue to be in the future. The instructional approach of distance learning - or DL - has many benefits but has yet to reach its full potential...

Structure-conductivity studies in polymer electrolytes containing multivalent cations

International Nuclear Information System (INIS)

Aziz, M.

1996-05-01

Understanding the structure - conductivity relationship is of paramount importance for the development of polymer electrolytes. The present studies present the techniques found useful in the elucidation of structure - conductivity relationship in PEO n :ZnBr 2 (n = 8, 1000, 2000, 3000, 4000 and 5000) and PEO n :FeBr x (n= 8, 20 and 50; x = 2 and 3). Local structural studies have been undertaken using X-ray absorption fine structures (XAFS) which includes extended X-ray absorption fine structure (EXAFS) and X-ray absorption near edge structure (XANES). EXAFS provides interatomic distance and coordination numbers of the nearest neighbours and results from the EXAFS studies showed that high conductivity is associated with stretched M - O interatomic distance. In the studies on ultra dilute Zn samples it was found that the cation is highly solvated by the heteroatom forming a tightly bound environment which inhibits local segmental motion thus impeding ion migration. XANES studies on the PEO and modified PEO complexes of NiBr 2 revealed the sensitivity of XANES to the structural differences. XANES on Zn and Fe samples also revealed the sensitivity to changes in interatomic distances reflected in shifts of the white line. The complementary nature of EXAFS and XANES was reflected in the studies conducted. Morphological studies were undertaken employing differential scanning calorimetry (DSC), variable temperature polarising microscopy (VTPM) and atomic force microscopy (AFM). DSC evidences helped to explain the texture of the iron samples during the drying process, and showed transitions between low melting, PEO and high melting spherulites, and VTPM is able to visualise the spherulites present in the samples. AFM has successfully imaged the as cast PEO 8 :FeBr 2 sample and the surface effect causing extra resistance in the impedance spectra could be seen. Conductivity studies were carried out using a.c. impedance spectra. Fe(ll) samples exhibit the typical semicircle

Towards long-distance quantum communication: new techniques and tools

International Nuclear Information System (INIS)

Lukin, M.

2005-01-01

Full text: We will describe our efforts to develop new techniques and tools for long-distance quantum communication. Specifically we will discuss recent experimental work towards developing elements for long-distance quantum communication using atomic ensembles. In addition, we will describe a novel approach to long-distance quantum communication that is based on solid-state single photon emitters. (author)

The effect of debris-flow composition on runout distance

Science.gov (United States)

de Haas, Tjalling; Braat, Lisanne; Leuven, Jasper; Lokhorst, Ivar; Kleinhans, Maarten

2015-04-01

Estimating runout distance is of major importance for the assessment and mitigation of debris-flow hazards. Debris-flow runout distance depends on debris-flow composition and topography, but state-of-the-art runout prediction methods are mainly based on topographical parameters and debris-flow volume, while composition is generally neglected or incorporated in empirical constants. Here we experimentally investigated the effect of debris-flow composition and topography on runout distance. We created the first small-scale experimental debris flows with self-formed levees, distinct lobes and morphology and texture accurately resembling natural debris flows. In general, the effect of debris-flow composition on runout distance was larger than the effect of topography. Enhancing channel slope and width, outflow plain slope, debris-flow size and water fraction leads to an increase in runout distance. However, runout distance shows an optimum relation with coarse-material and clay fraction. An increase in coarse-material fraction leads to larger runout distances by increased grain collisional forces and more effective levee formation, but too much coarse debris causes a large accumulation of coarse debris at the flow front, enhancing friction and decreasing runout. An increase in clay fraction initially enlarges the volume and viscosity of the interstitial fluid, liquefying the flow and enhancing runout, while a further increase leads to very viscous flows with high yield strength, reducing runout. These results highlight the importance and further need of research on the relation between debris-flow composition and runout distance. Our experiments further provide valuable insight on the effects of debris-flow composition on depositional mechanisms and deposit morphology.

Distance to Cure

OpenAIRE

Capachi, Casey

2013-01-01

Distance to Cure A three-part television series by Casey Capachi www.distancetocure.com   Abstract   How far would you go for health care? This three-part television series, featuring two introductory segments between each piece, focuses on the physical, cultural, and political obstacles facing rural Native American patients and the potential of health technology to break down those barriers to care.   Part one,Telemedici...

Comparative evaluation of ultrasound scanner accuracy in distance measurement

Science.gov (United States)

Branca, F. P.; Sciuto, S. A.; Scorza, A.

2012-10-01

The aim of the present study is to develop and compare two different automatic methods for accuracy evaluation in ultrasound phantom measurements on B-mode images: both of them give as a result the relative error e between measured distances, performed by 14 brand new ultrasound medical scanners, and nominal distances, among nylon wires embedded in a reference test object. The first method is based on a least squares estimation, while the second one applies the mean value of the same distance evaluated at different locations in ultrasound image (same distance method). Results for both of them are proposed and explained.

Changes in Foot Shape after Long-Distance Running

OpenAIRE

Fukano, Mako; Iso, Shigeo

2015-01-01

Changes in foot shape during long-distance running may lead to alteration in shoe fit. However, little information is available on changes in foot shape following long-distance running. The purpose of this study was to assess changes in foot shape in experienced runners after a single long-distance run. Data from the right feet of 21 subjects were obtained using a foot scanner before and after running 35 km on an asphalt road. After the run, the dorsal height, navicular height, and arch heigh...

Online Communication in Organizations Does Not Kill Distance

DEFF Research Database (Denmark)

Hage, Eveline; Tan, Chee-Wee

Debates on the effects of online communication on distance within organizational networks have persisted within extant literature. Early contributions, which focus primarily on geographical distance, have highlighted the negative impact of distance on network evolution and sustenance, alluding...... to the importance of online communication as a means of nullifying these effects (Caimcross, 2001; Wellman, 2001). These studies have led to optimistic, but also premature, declarations of the ‘death of distance’ (Caimcross, 2001). More recent works however, have demonstrated that online networks are “to...

The social distance theory of power.

Science.gov (United States)

Magee, Joe C; Smith, Pamela K

2013-05-01

We propose that asymmetric dependence between individuals (i.e., power) produces asymmetric social distance, with high-power individuals feeling more distant than low-power individuals. From this insight, we articulate predictions about how power affects (a) social comparison, (b) susceptibility to influence, (c) mental state inference and responsiveness, and (d) emotions. We then explain how high-power individuals' greater experienced social distance leads them to engage in more abstract mental representation. This mediating process of construal level generates predictions about how power affects (a) goal selection and pursuit, (b) attention to desirability and feasibility concerns, (c) subjective certainty, (d) value-behavior correspondence, (e) self-control, and (f) person perception. We also reassess the approach/inhibition theory of power, noting limitations both in what it can predict and in the evidence directly supporting its proposed mechanisms. Finally, we discuss moderators and methodological recommendations for the study of power from a social distance perspective.

Exact geodesic distances in FLRW spacetimes

Science.gov (United States)

Cunningham, William J.; Rideout, David; Halverson, James; Krioukov, Dmitri

2017-11-01

Geodesics are used in a wide array of applications in cosmology and astrophysics. However, it is not a trivial task to efficiently calculate exact geodesic distances in an arbitrary spacetime. We show that in spatially flat (3 +1 )-dimensional Friedmann-Lemaître-Robertson-Walker (FLRW) spacetimes, it is possible to integrate the second-order geodesic differential equations, and derive a general method for finding both timelike and spacelike distances given initial-value or boundary-value constraints. In flat spacetimes with either dark energy or matter, whether dust, radiation, or a stiff fluid, we find an exact closed-form solution for geodesic distances. In spacetimes with a mixture of dark energy and matter, including spacetimes used to model our physical universe, there exists no closed-form solution, but we provide a fast numerical method to compute geodesics. A general method is also described for determining the geodesic connectedness of an FLRW manifold, provided only its scale factor.

Quality evaluation in distance undergraduate courses in Brazil

Directory of Open Access Journals (Sweden)

Carla Netto

2015-01-01

of distance-run undergraduate courses (D.Ed.. The data from the instruments were then processed according to Discourse Textual Analysis (DTA. The evaluation process for undergraduate distance education courses in the USA was evaluated by identifying those quality indicators adopted by international accreditation agencies. Based on the analysis of the evaluation process of distance undergraduate courses in Brazil, a further study was carried out about the results and impacts of the Brazilian system, especially the indicators used and the level of confidence that existed when measuring the quality of distance-based undergraduate courses. As a result of this research, our researchers observed there was a real need to establish a quality assurance benchmark in Brazil along these conceptual lines, namely one that represents quality in D.Ed. and includes the usage of indicators that reflect the excellence of the degree course that are offered. This level of excellence is assessed on the basis of the training, experience, knowledge and skills of the evaluators, as well as on clear, precise and transparent criteria for measuring the quality-based distance degree courses. On the other hand, it is also necessary to be equipped with a Bank of Evaluators – not only for those who work in this field, but also for a group of experts that is large enough to implement the Brazilian evaluation system in distance education programs.

Adhesive contact: from atomistic model to continuum model

International Nuclear Information System (INIS)

Fan Kang-Qi; Jia Jian-Yuan; Zhu Ying-Min; Zhang Xiu-Yan

2011-01-01

Two types of Lennard-Jones potential are widely used in modeling adhesive contacts. However, the relationships between the parameters of the two types of Lennard-Jones potential are not well defined. This paper employs a self-consistent method to derive the Lennard-Jones surface force law from the interatomic Lennard-Jones potential with emphasis on the relationships between the parameters. The effect of using correct parameters in the adhesion models is demonstrated in single sphere-flat contact via continuum models and an atomistic model. Furthermore, the adhesion hysteresis behaviour is investigated, and the S-shaped force-distance relation is revealed by the atomistic model. It shows that the adhesion hysteresis loop is generated by the jump-to-contact and jump-off-contact, which are illustrated by the S-shaped force-distance curve. (atomic and molecular physics)

A Catalog of Distances to Molecular Clouds from Pan-STARRS1

Science.gov (United States)

Schlafly, Eddie; Green, G.; Finkbeiner, D. P.; Rix, H.

2014-01-01

We present a catalog of distances to molecular clouds, derived from PanSTARRS-1 photometry. We simultaneously infer the full probability distribution function of reddening and distance of the stars towards these clouds using the technique of Green et al. (2013) (see neighboring poster). We fit the resulting measurements using a simple dust screen model to infer the distance to each cloud. The result is a large, homogeneous catalog of distances to molecular clouds. For clouds with heliocentric distances greater than about 200 pc, typical statistical uncertainties in the distances are 5%, with systematic uncertainty stemming from the quality of our stellar models of about 10%. We have applied this analysis to many of the most well-studied clouds in the δ > -30° sky, including Orion, California, Taurus, Perseus, and Cepheus. We have also studied the entire catalog of Magnani, Blitz, and Mundy (1985; MBM), though for about half of those clouds we can provide only upper limits on the distances. We compare our distances with distances from the literature, when available, and find good agreement.

The anisotropy of perceived distance: The eyes story

Directory of Open Access Journals (Sweden)

Tošković Oliver

2011-01-01

Full Text Available The aim of this study is to determine whether the eye position shift changes perceived distance, that is, whether kinesthetic information from eye muscles affects distance perception. Two experiments were done, in a dark room (reduced-cue situation, with 27 participants, psychology undergraduates. Participants had a task to match distances of three stimuli, on three viewing directions, 0, 30 and 60 deg rees relative to the body. Head and body of participants were fixed, and they changed viewing directions only by moving their eyes. Stimuli were 7cm

Paintball velocity as a function of distance traveled

Directory of Open Access Journals (Sweden)

Pat Chiarawongse

2008-06-01

Full Text Available The relationship between the distance a paintball travels through air and its velocity is investigated by firing a paintball into a ballistic pendulum from a range of distances. The motion of the pendulum was filmed and analyzed by using video analysis software. The velocity of the paintball on impact was calculated from the maximum horizontal displacement of the pendulum. It is shown that the velocity of a paintball decreases exponentially with distance traveled, as expected. The average muzzle velocity of the paint balls is found with an estimate of the drag coefficient.

Paintball velocity as a function of distance traveled

Directory of Open Access Journals (Sweden)

Pat Chiarawongse

2008-06-01

Full Text Available The relationship between the distance a paintball travels through air and its velocity is investigated by firing a paintball into a ballistic pendulum from a range of distances. The motion of the pendulum was filmed and analyzed by using video analysis software. The velocity of the paintball on impact was calculated from the maximum horizontal displacement of the pendulum. It is shown that the velocity of a paintball decreases exponentially with distance traveled, as expected. The average muzzle velocity of the paint balls is found with an estimate of the drag coefficient

The interuncal distance in elderly patients with dementia

International Nuclear Information System (INIS)

Hanyu, Haruo; Takasaki, Masaru; Sugiyama, Takeshi; Abe, Shinei; Kobayashi, Yasutaka; Maehata, Yukihiko; Katsunuma, Hidetaka.

1993-01-01

The interuncal distance between the unci of the temporal lobes was measured from axial MR images of the brain in elderly patients with dementia including dementia of the Alzheimer type (DAT), vascular dementia (VD), and others. The measured value of the interuncal distance completely separated patients with DAT from normal controls, and there was significant diference in the interuncal distance between patients with DAT and VD. This measurement is a practical method of assessing hippocampal atrophy and appears to be a useful adjunct in the clinical diagnosis of DAT. (author)

Distance matrices and quadratic embedding of graphs

Directory of Open Access Journals (Sweden)

Nobuaki Obata

2018-04-01

Full Text Available A connected graph is said to be of QE class if it admits  a quadratic embedding in a Hilbert space, or equivalently, if the distance matrix is conditionally negative definite. Several criteria for a graph to be of QE class are derived from the point of view of graph operations. For a quantitative criterion the QE constant is introduced and concrete examples are shown with explicit calculation. If the distance matrix admits a constant row sum, the QE constant coincides with the second largest eigenvalue of the distance matrix. The QE constants are determined for all graphs on $n$ vertices with $n\\le5$, among which two are not of QE class.

Ethnic and social distance towards Roma population

Directory of Open Access Journals (Sweden)

Miladinović Slobodan

2008-01-01

Full Text Available The Roma people are one of social marginalised ethnic groups which can easily be classified as underclass or ethno-class. In this work are presented the results of survey data analysis of ethnic and social distance towards the Roma population (2007. It concludes that the Roma people are one of ethnic groups with the highest social and ethnic distances in all observed social relations. The conclusion is that their generations poverty and still of life which the poverty produces are main causes of the high distance. The society has very important task to overcome situation which keep their social situation. In this paper are showed some of possible solutions of solving global Romas social situation and their integration in the rest of society. .

Project-based Collaborative learning in distance education

DEFF Research Database (Denmark)

Knudsen, Morten; Bajard, Christine; Helbo, Jan

2004-01-01

) programme indicates, however, that adjustments are required in transforming the on-campus model to distance education. The main problem is that while project work is an excellent regulator of the learning process for on-campus students, this does not seem to be the case for off-campus students. Consequently......This article describes the experiences drawn from an experiment in transferring positive experience with a project-organised on-campus engineering programme to a technology supported distance education programme. Three years of experience with the Master of Industrial Information Technology (MII......, didactic adjustments have been made based on feedback, in particular from evaluation questionnaires. This process has been very constructive in approaching the goal: a successful model for project organized learning in distance education....

Physiological responses at short distances from a parametric speaker

Directory of Open Access Journals (Sweden)

Lee Soomin

2012-06-01

Full Text Available Abstract In recent years, parametric speakers have been used in various circumstances. In our previous studies, we verified that the physiological burden of the sound of parametric speaker set at 2.6 m from the subjects was lower than that of the general speaker. However, nothing has yet been demonstrated about the effects of the sound of a parametric speaker at the shorter distance between parametric speakers the human body. Therefore, we studied this effect on physiological functions and task performance. Nine male subjects participated in this study. They completed three consecutive sessions: a 20-minute quiet period as a baseline, a 30-minute mental task period with general speakers or parametric speakers, and a 20-minute recovery period. We measured electrocardiogram (ECG photoplethysmogram (PTG, electroencephalogram (EEG, systolic and diastolic blood pressure. Four experiments, one with a speaker condition (general speaker and parametric speaker, the other with a distance condition (0.3 m and 1.0 m, were conducted respectively at the same time of day on separate days. To examine the effects of the speaker and distance, three-way repeated measures ANOVA (speaker factor x distance factor x time factor were conducted. In conclusion, we found that the physiological responses were not significantly different between the speaker condition and the distance condition. Meanwhile, it was shown that the physiological burdens increased with progress in time independently of speaker condition and distance condition. In summary, the effects of the parametric speaker at the 2.6 m distance were not obtained at the distance of 1 m or less.

Femtosecond frequency comb based distance measurement in air

NARCIS (Netherlands)

Balling, P.; Kren, P.; Masika, P.; van den Berg, S.A.

2009-01-01

Interferometric measurement of distance using a femtosecond frequency comb is demonstrated and compared with a counting interferometer displacement measurement. A numerical model of pulse propagation in air is developed and the results are compared with experimental data for short distances. The

Distance matrix-based approach to protein structure prediction.

Science.gov (United States)

Kloczkowski, Andrzej; Jernigan, Robert L; Wu, Zhijun; Song, Guang; Yang, Lei; Kolinski, Andrzej; Pokarowski, Piotr

2009-03-01

Much structural information is encoded in the internal distances; a distance matrix-based approach can be used to predict protein structure and dynamics, and for structural refinement. Our approach is based on the square distance matrix D = [r(ij)(2)] containing all square distances between residues in proteins. This distance matrix contains more information than the contact matrix C, that has elements of either 0 or 1 depending on whether the distance r (ij) is greater or less than a cutoff value r (cutoff). We have performed spectral decomposition of the distance matrices D = sigma lambda(k)V(k)V(kT), in terms of eigenvalues lambda kappa and the corresponding eigenvectors v kappa and found that it contains at most five nonzero terms. A dominant eigenvector is proportional to r (2)--the square distance of points from the center of mass, with the next three being the principal components of the system of points. By predicting r (2) from the sequence we can approximate a distance matrix of a protein with an expected RMSD value of about 7.3 A, and by combining it with the prediction of the first principal component we can improve this approximation to 4.0 A. We can also explain the role of hydrophobic interactions for the protein structure, because r is highly correlated with the hydrophobic profile of the sequence. Moreover, r is highly correlated with several sequence profiles which are useful in protein structure prediction, such as contact number, the residue-wise contact order (RWCO) or mean square fluctuations (i.e. crystallographic temperature factors). We have also shown that the next three components are related to spatial directionality of the secondary structure elements, and they may be also predicted from the sequence, improving overall structure prediction. We have also shown that the large number of available HIV-1 protease structures provides a remarkable sampling of conformations, which can be viewed as direct structural information about the

Distance Measurement Solves Astrophysical Mysteries

Science.gov (United States)

2003-08-01

Location, location, and location. The old real-estate adage about what's really important proved applicable to astrophysics as astronomers used the sharp radio "vision" of the National Science Foundation's Very Long Baseline Array (VLBA) to pinpoint the distance to a pulsar. Their accurate distance measurement then resolved a dispute over the pulsar's birthplace, allowed the astronomers to determine the size of its neutron star and possibly solve a mystery about cosmic rays. "Getting an accurate distance to this pulsar gave us a real bonanza," said Walter Brisken, of the National Radio Astronomy Observatory (NRAO) in Socorro, NM. Monogem Ring The Monogem Ring, in X-Ray Image by ROSAT satellite CREDIT: Max-Planck Institute, American Astronomical Society (Click on Image for Larger Version) The pulsar, called PSR B0656+14, is in the constellation Gemini, and appears to be near the center of a circular supernova remnant that straddles Gemini and its neighboring constellation, Monoceros, and is thus called the Monogem Ring. Since pulsars are superdense, spinning neutron stars left over when a massive star explodes as a supernova, it was logical to assume that the Monogem Ring, the shell of debris from a supernova explosion, was the remnant of the blast that created the pulsar. However, astronomers using indirect methods of determining the distance to the pulsar had concluded that it was nearly 2500 light-years from Earth. On the other hand, the supernova remnant was determined to be only about 1000 light-years from Earth. It seemed unlikely that the two were related, but instead appeared nearby in the sky purely by a chance juxtaposition. Brisken and his colleagues used the VLBA to make precise measurements of the sky position of PSR B0656+14 from 2000 to 2002. They were able to detect the slight offset in the object's apparent position when viewed from opposite sides of Earth's orbit around the Sun. This effect, called parallax, provides a direct measurement of

Defining functional distances over Gene Ontology

Directory of Open Access Journals (Sweden)

del Pozo Angela

2008-01-01

Full Text Available Abstract Background A fundamental problem when trying to define the functional relationships between proteins is the difficulty in quantifying functional similarities, even when well-structured ontologies exist regarding the activity of proteins (i.e. 'gene ontology' -GO-. However, functional metrics can overcome the problems in the comparing and evaluating functional assignments and predictions. As a reference of proximity, previous approaches to compare GO terms considered linkage in terms of ontology weighted by a probability distribution that balances the non-uniform 'richness' of different parts of the Direct Acyclic Graph. Here, we have followed a different approach to quantify functional similarities between GO terms. Results We propose a new method to derive 'functional distances' between GO terms that is based on the simultaneous occurrence of terms in the same set of Interpro entries, instead of relying on the structure of the GO. The coincidence of GO terms reveals natural biological links between the GO functions and defines a distance model Df which fulfils the properties of a Metric Space. The distances obtained in this way can be represented as a hierarchical 'Functional Tree'. Conclusion The method proposed provides a new definition of distance that enables the similarity between GO terms to be quantified. Additionally, the 'Functional Tree' defines groups with biological meaning enhancing its utility for protein function comparison and prediction. Finally, this approach could be for function-based protein searches in databases, and for analysing the gene clusters produced by DNA array experiments.

Understanding Long-distance Traveler Behavior : Supporting a Long-distance Passenger Travel Demand Model

Science.gov (United States)

2013-01-01

Long-distance trips in the United States can take 2 days or 2 weeks and may involve cars, buses, planes, or all three. Whether for business, to see family, or visit a national park, such a variety of trip characteristics requires a detailed understan...

Does distance e-learning work? A comparison between distance and face-to-face learners using e-learning materials

Directory of Open Access Journals (Sweden)

Sara de Freitas

2003-12-01

Full Text Available This study compares continual assessment data, intake numbers, retention numbers and final examination grades of a mixed cohort of face-to-face and distance learners against similar data from previous years where e-learning materials were not used in order to test whether e-learning materials can support the same quality and quantity of teaching and learning for both face-to-face and distance learners. The results for this cohort of learners demonstrate that: (i distance e-learners score as well and sometimes better than face-to-face learners; (ii face-to-face student numbers have increased; (iii overall, student retention and student attendance have been maintained; (iv final examination results have been maintained or in some cases improved; (v lecturer workload was high, but not unmanageable, and it is clear how manageability can be improved.

Giant HII regions as distance indicators

International Nuclear Information System (INIS)

Melnick, Jorge; Terlevich, Robert; Moles, Mariano

1987-01-01

The correlations between the integrated Hβ luminosities, the velocity widths of the nebular lines and the metallicities of giant HII regions and HII galaxies are demonstrated to provide powerful distance indicators. They are calibrated on a homogeneous sample of giant HII regions with well determined distances and applied to distant HII galaxies to obtain a value of H 0 =95+-10 for the Hubble parameter, consistent with the value obtained by the Tully-Fisher technique. The effect of Malmquist bias and other systematic effects on the HII region method are discussed in detail. (Author)

Contextual Distance Refining for Image Retrieval

KAUST Repository

Islam, Almasri

2014-01-01

Recently, a number of methods have been proposed to improve image retrieval accuracy by capturing context information. These methods try to compensate for the fact that a visually less similar image might be more relevant because it depicts the same object. We propose a new quick method for refining any pairwise distance metric, it works by iteratively discovering the object in the image from the most similar images, and then refine the distance metric accordingly. Test show that our technique improves over the state of art in terms of accuracy over the MPEG7 dataset.

Contextual Distance Refining for Image Retrieval

KAUST Repository

Islam, Almasri

2014-09-16

Recently, a number of methods have been proposed to improve image retrieval accuracy by capturing context information. These methods try to compensate for the fact that a visually less similar image might be more relevant because it depicts the same object. We propose a new quick method for refining any pairwise distance metric, it works by iteratively discovering the object in the image from the most similar images, and then refine the distance metric accordingly. Test show that our technique improves over the state of art in terms of accuracy over the MPEG7 dataset.

Generalized Distance Transforms and Skeletons in Graphics Hardware

NARCIS (Netherlands)

Strzodka, R.; Telea, A.

2004-01-01

We present a framework for computing generalized distance transforms and skeletons of two-dimensional objects using graphics hardware. Our method is based on the concept of footprint splatting. Combining different splats produces weighted distance transforms for different metrics, as well as the

Distance stereotest using a 3-dimensional monitor for adult subjects.

Science.gov (United States)

Kim, Jongshin; Yang, Hee Kyung; Kim, Youngmin; Lee, Byoungho; Hwang, Jeong-Min

2011-06-01

To evaluate the validity and test-retest reliability of a contour-based 3-dimensional (3-D) monitor distance stereotest (distance 3-D stereotest) and to measure the maximum horizontal disparity that can be fused with disparity vergence for determining the largest measurable disparity of true stereopsis. Observational case series. Sixty-four normal adult subjects (age range, 23 to 39 years) were recruited. Contour-based circles (crossed disparity, 5000 to 20 seconds of arc; Microsoft Visual Studio C(++) 6.0; Microsoft, Inc, Seattle, Washington, USA) were generated on a 3-D monitor (46-inch stereoscopic display) using polarization glasses and were presented to subjects with normal binocularity at 3 m. While the position of the stimulus changed among 4 possible locations, the subjects were instructed to press the corresponding position of the stimulus on a keypad. The results with the new distance 3-D stereotest were compared with those from the distance Randot stereotest. The results of the distance 3-D stereotest and the distance Randot stereotests were identical in 64% and within 1 disparity level in 97% of normal adults. Scores obtained with the 2 tests showed a statistically significant correlation (r = 0.324, P = .009). The half-width of the 95% limit of agreement was 0.47 log seconds of arc (1.55 octaves) using the distance 3-D stereotest--similar to or better than that obtained with conventional distance stereotests. The maximum binocular disparity that can be fused with vergence was 1828 ± 794 seconds of arc (range, 4000 to 500). The distance 3-D stereotest showed good concordance with the distance Randot stereotest and relatively good test-retest reliability, supporting the validity of the distance 3-D stereotest. The normative data set obtained from the present study can serve as a useful reference for quantitative assessment of a wide range of binocular sensory abnormalities. Copyright © 2011 Elsevier Inc. All rights reserved.

Weighted Distances in Scale-Free Configuration Models

Science.gov (United States)

Adriaans, Erwin; Komjáthy, Júlia

2018-01-01

In this paper we study first-passage percolation in the configuration model with empirical degree distribution that follows a power-law with exponent τ \\in (2,3) . We assign independent and identically distributed (i.i.d.) weights to the edges of the graph. We investigate the weighted distance (the length of the shortest weighted path) between two uniformly chosen vertices, called typical distances. When the underlying age-dependent branching process approximating the local neighborhoods of vertices is found to produce infinitely many individuals in finite time—called explosive branching process—Baroni, Hofstad and the second author showed in Baroni et al. (J Appl Probab 54(1):146-164, 2017) that typical distances converge in distribution to a bounded random variable. The order of magnitude of typical distances remained open for the τ \\in (2,3) case when the underlying branching process is not explosive. We close this gap by determining the first order of magnitude of typical distances in this regime for arbitrary, not necessary continuous edge-weight distributions that produce a non-explosive age-dependent branching process with infinite mean power-law offspring distributions. This sequence tends to infinity with the amount of vertices, and, by choosing an appropriate weight distribution, can be tuned to be any growing function that is O(log log n) , where n is the number of vertices in the graph. We show that the result remains valid for the the erased configuration model as well, where we delete loops and any second and further edges between two vertices.

Aplikácia distance workingu v konkrétnej firme

OpenAIRE

Hasík, Gabriel

2010-01-01

Bachelor thesis provides an overview of the various forms of distance working. It includes a theoretical part, where are described all types of distance working, then the section describing the effects of distance working on the employee and employer (the impact on the psychic, work efficiency, work ethic, etc.). The final part focuses on the application of distance working on a specific company. This section includes the assessment of various options and choices to suit the company.

Multi-image acquisition-based distance sensor using agile laser spot beam.

Science.gov (United States)

Riza, Nabeel A; Amin, M Junaid

2014-09-01

We present a novel laser-based distance measurement technique that uses multiple-image-based spatial processing to enable distance measurements. Compared with the first-generation distance sensor using spatial processing, the modified sensor is no longer hindered by the classic Rayleigh axial resolution limit for the propagating laser beam at its minimum beam waist location. The proposed high-resolution distance sensor design uses an electronically controlled variable focus lens (ECVFL) in combination with an optical imaging device, such as a charged-coupled device (CCD), to produce and capture different laser spot size images on a target with these beam spot sizes different from the minimal spot size possible at this target distance. By exploiting the unique relationship of the target located spot sizes with the varying ECVFL focal length for each target distance, the proposed distance sensor can compute the target distance with a distance measurement resolution better than the axial resolution via the Rayleigh resolution criterion. Using a 30 mW 633 nm He-Ne laser coupled with an electromagnetically actuated liquid ECVFL, along with a 20 cm focal length bias lens, and using five spot images captured per target position by a CCD-based Nikon camera, a proof-of-concept proposed distance sensor is successfully implemented in the laboratory over target ranges from 10 to 100 cm with a demonstrated sub-cm axial resolution, which is better than the axial Rayleigh resolution limit at these target distances. Applications for the proposed potentially cost-effective distance sensor are diverse and include industrial inspection and measurement and 3D object shape mapping and imaging.

The Euclidean distance degree

NARCIS (Netherlands)

Draisma, J.; Horobet, E.; Ottaviani, G.; Sturmfels, B.; Thomas, R.R.; Zhi, L.; Watt, M.

2014-01-01

The nearest point map of a real algebraic variety with respect to Euclidean distance is an algebraic function. For instance, for varieties of low rank matrices, the Eckart-Young Theorem states that this map is given by the singular value decomposition. This article develops a theory of such nearest

Academy Distance Learning Tools (IRIS) -

Data.gov (United States)

Department of Transportation — IRIS is a suite of front-end web applications utilizing a centralized back-end Oracle database. The system fully supports the FAA Academy's Distance Learning Program...

Preferred viewing distance and screen angle of electronic paper displays.

Science.gov (United States)

Shieh, Kong-King; Lee, Der-Song

2007-09-01

This study explored the viewing distance and screen angle for electronic paper (E-Paper) displays under various light sources, ambient illuminations, and character sizes. Data analysis showed that the mean viewing distance and screen angle were 495 mm and 123.7 degrees. The mean viewing distances for Kolin Chlorestic Liquid Crystal display was 500 mm, significantly longer than Sony electronic ink display, 491 mm. Screen angle for Kolin was 127.4 degrees, significantly greater than that of Sony, 120.0 degrees. Various light sources revealed no significant effect on viewing distances; nevertheless, they showed significant effect on screen angles. The screen angle for sunlight lamp (D65) was similar to that of fluorescent lamp (TL84), but greater than that of tungsten lamp (F). Ambient illumination and E-paper type had significant effects on viewing distance and screen angle. The higher the ambient illumination was, the longer the viewing distance and the lesser the screen angle. Character size had significant effect on viewing distances: the larger the character size, the longer the viewing distance. The results of this study indicated that the viewing distance for E-Paper was similar to that of visual display terminal (VDT) at around 500 mm, but greater than normal paper at about 360 mm. The mean screen angle was around 123.7 degrees, which in terms of viewing angle is 29.5 degrees below horizontal eye level. This result is similar to the general suggested viewing angle between 20 degrees and 50 degrees below the horizontal line of sight.

Maximum nondiffracting propagation distance of aperture-truncated Airy beams

Science.gov (United States)

Chu, Xingchun; Zhao, Shanghong; Fang, Yingwu

2018-05-01

Airy beams have called attention of many researchers due to their non-diffracting, self-healing and transverse accelerating properties. A key issue in research of Airy beams and its applications is how to evaluate their nondiffracting propagation distance. In this paper, the critical transverse extent of physically realizable Airy beams is analyzed under the local spatial frequency methodology. The maximum nondiffracting propagation distance of aperture-truncated Airy beams is formulated and analyzed based on their local spatial frequency. The validity of the formula is verified by comparing the maximum nondiffracting propagation distance of an aperture-truncated ideal Airy beam, aperture-truncated exponentially decaying Airy beam and exponentially decaying Airy beam. Results show that the formula can be used to evaluate accurately the maximum nondiffracting propagation distance of an aperture-truncated ideal Airy beam. Therefore, it can guide us to select appropriate parameters to generate Airy beams with long nondiffracting propagation distance that have potential application in the fields of laser weapons or optical communications.

Compressions of electrorheological fluids under different initial gap distances.

Science.gov (United States)

Tian, Yu; Wen, Shizhu; Meng, Yonggang

2003-05-01

Compressions of electrorheological (ER) fluids have been carried out under different initial gap distances and different applied voltages. The nominal yield stresses of the compressed ER fluid under different conditions, according to the mechanics of compressing continuous fluids considering the yield stress of the plastic fluid, have been calculated. Curves of nominal yield stress under different applied voltages at an initial gap distance of 4 mm overlapped well and were shown to be proportional to the square of the external electric field and agree well with the traditional description. With the decrease of the initial gap distance, the difference between the nominal yield stress curves increased. The gap distance effect on the compression of ER fluids could not be explained by the traditional description based on the Bingham model and the continuous media theory. An explanation based on the mechanics of particle chain is proposed to describe the gap distance effect on the compression of ER fluids.

Determining distances using asteroseismic methods

DEFF Research Database (Denmark)

Aguirre, Victor Silva; Casagrande, L.; Basu, Sarbina

2013-01-01

Asteroseismology has been extremely successful in determining the properties of stars in different evolutionary stages with a remarkable level of precision. However, to fully exploit its potential, robust methods for estimating stellar parameters are required and independent verification of the r......Asteroseismology has been extremely successful in determining the properties of stars in different evolutionary stages with a remarkable level of precision. However, to fully exploit its potential, robust methods for estimating stellar parameters are required and independent verification...... fluxes, and thus distances for field stars in a self-consistent manner. Applying our method to a sample of solar-like oscillators in the {\\it Kepler} field that have accurate {\\it Hipparcos} parallaxes, we find agreement in our distance determinations to better than 5%. Comparison with measurements...

Study of probe-sample distance for biomedical spectra measurement

Directory of Open Access Journals (Sweden)

Li Lei

2011-11-01

Full Text Available Abstract Background Fiber-based optical spectroscopy has been widely used for biomedical applications. However, the effect of probe-sample distance on the collection efficiency has not been well investigated. Method In this paper, we presented a theoretical model to maximize the illumination and collection efficiency in designing fiber optic probes for biomedical spectra measurement. This model was in general applicable to probes with single or multiple fibers at an arbitrary incident angle. In order to demonstrate the theory, a fluorescence spectrometer was used to measure the fluorescence of human finger skin at various probe-sample distances. The fluorescence spectrum and the total fluorescence intensity were recorded. Results The theoretical results show that for single fiber probes, contact measurement always provides the best results. While for multi-fiber probes, there is an optimal probe distance. When a 400- μm excitation fiber is used to deliver the light to the skin and another six 400- μm fibers surrounding the excitation fiber are used to collect the fluorescence signal, the experimental results show that human finger skin has very strong fluorescence between 475 nm and 700 nm under 450 nm excitation. The fluorescence intensity is heavily dependent on the probe-sample distance and there is an optimal probe distance. Conclusions We investigated a number of probe-sample configurations and found that contact measurement could be the primary choice for single-fiber probes, but was very inefficient for multi-fiber probes. There was an optimal probe-sample distance for multi-fiber probes. By carefully choosing the probe-sample distance, the collection efficiency could be enhanced by 5-10 times. Our experiments demonstrated that the experimental results of the probe-sample distance dependence of collection efficiency in multi-fiber probes were in general agreement with our theory.

Distance learning methodology and technique in scientific and vocational communication (on the example of the master’s distance course in linguistics

Directory of Open Access Journals (Sweden)

S. S. Khromov

2016-01-01

Full Text Available The article is devoted to the elaboration of methodology and technique of the master’s distance course in linguistics for Russian students. The research novelty lies in the fact that the course presents the results methodic and scientific work of the teachers’ and students’ stuff. Within the course framework we plan to transfer the communicative activity concept to the distance forms of education and modeling a new type of the educational product.The purposes of the research are: 1 to develop the distance learning methodology and technique for a linguistic master’s course; 2 to elaborate an internal structure of the project; 3 to demonstrate which vocational, language and speech competencies are to appear as tge result of the project; 4 to describe the algorithm of the full-time lecture course in linguistics in a distance format; 5 to conduct a pedagogical experiment realizing the distance learning education in master’s linguistic course; 6 to prove the innovation and the productivity of the elaborated master’s course in linguistics.The research is based on 1 the paper variant of the full-time lecture course 2 the curriculum of the lecture course 3 the concept of the master’s course in linguistics 4 the concept of the distance course in linguistics 5 students’ interviews 6 virtual tools The research methods are 1 descriptive 2 project 3 comparative 4 statistic methodsConclusion. The novelty and the productivity of the course have been proved and they are manifested in the following 1 in the ability to develop vocational, language and speech competences of the students 2 in developing individual trajectories of the students 3 in expanding sociocultural potential of the students 4 in developing sociocultural potential of the students 5 in intensifying education process. As a result of the experiment we can state that 1 the methodology and technique of distance tools in projecting master’s course in linguistics are described 2 the

Emotional distance to so-called difficult patients

DEFF Research Database (Denmark)

Michaelsen, Jette Joost

2012-01-01

Scand J Caring Sci; 2011 Emotional distance to so-called difficult patients Purpose: To explore nurses' relationships with patients they regard as being difficult. How do nurses feel about such patients and relate to them, and what are the consequences for nurse and patient? Design and methods....... Patients' case records were studied and four meetings with the staff were arranged to discuss the findings. Data collection lasted 18 months in all. Findings: Three strategies were identified: persuasion, avoidance (emotional distance), and compromise. Interestingly, in the relationship with a particular...... patient, the avoidance strategy did not necessarily represent the terminal stage, since a nurse could revert to the compromise strategy. Some of the nurses experienced painful emotions regarding these interactions. Conclusions: The avoidance strategy (emotional distance) resulted in important social...

A Survey of Binary Similarity and Distance Measures

Directory of Open Access Journals (Sweden)

Seung-Seok Choi

2010-02-01

Full Text Available The binary feature vector is one of the most common representations of patterns and measuring similarity and distance measures play a critical role in many problems such as clustering, classification, etc. Ever since Jaccard proposed a similarity measure to classify ecological species in 1901, numerous binary similarity and distance measures have been proposed in various fields. Applying appropriate measures results in more accurate data analysis. Notwithstanding, few comprehensive surveys on binary measures have been conducted. Hence we collected 76 binary similarity and distance measures used over the last century and reveal their correlations through the hierarchical clustering technique.

The Concept of Distance in International Management Research

DEFF Research Database (Denmark)

Ambos, Björn; Håkanson, Lars

2014-01-01

The effect of distance on firms' performance when entering, operating in and across foreign markets is a central issue in international management. However, our understanding of the impact of distance has long been constrained by flawed conceptualizations and unreliable measures. The papers...... in this issue break new ground both by advancing our theoretical understanding and by introducing new and potentially more useful measures. In this introduction, we provide a brief overview of the evolution of the distance concept before introducing the individual papers. We end by offering observations...... for future research based on the issues they raise....

Nanomechanical characterization by double-pass force-distance mapping

Energy Technology Data Exchange (ETDEWEB)

Dagdas, Yavuz S; Tekinay, Ayse B; Guler, Mustafa O; Dana, Aykutlu [UNAM Institute of Materials Science and Nanotechnology, Bilkent University, 06800 Ankara (Turkey); Necip Aslan, M, E-mail: aykutlu@unam.bilkent.edu.tr [Department of Physics, Istanbul Technical University, Istanbul (Turkey)

2011-07-22

We demonstrate high speed force-distance mapping using a double-pass scheme. The topography is measured in tapping mode in the first pass and this information is used in the second pass to move the tip over the sample. In the second pass, the cantilever dither signal is turned off and the sample is vibrated. Rapid (few kHz frequency) force-distance curves can be recorded with small peak interaction force, and can be processed into an image. Such a double-pass measurement eliminates the need for feedback during force-distance measurements. The method is demonstrated on self-assembled peptidic nanofibers.

Nanomechanical characterization by double-pass force-distance mapping

International Nuclear Information System (INIS)

Dagdas, Yavuz S; Tekinay, Ayse B; Guler, Mustafa O; Dana, Aykutlu; Necip Aslan, M

2011-01-01

We demonstrate high speed force-distance mapping using a double-pass scheme. The topography is measured in tapping mode in the first pass and this information is used in the second pass to move the tip over the sample. In the second pass, the cantilever dither signal is turned off and the sample is vibrated. Rapid (few kHz frequency) force-distance curves can be recorded with small peak interaction force, and can be processed into an image. Such a double-pass measurement eliminates the need for feedback during force-distance measurements. The method is demonstrated on self-assembled peptidic nanofibers.

Cutting the Distance in Distance Education: Reflections on the Use of E-Technologies in a New Zealand Social Work Program

Science.gov (United States)

Stanley-Clarke, Nicky; English, Awhina; Yeung, Polly

2018-01-01

The development of new e-technologies and an increased focus on developing distance social work education programs has created the impetus for social work educators to consider the tools they can employ in delivering distance courses. This article reflects on an action learning research project involving the development of an online toolbox of…

Special Issue on Distance Education and Development, Guest Editor Editorial -- Low Cost Distance Education Strategies: the use of appropriate information and communication technologies

Directory of Open Access Journals (Sweden)

Thomas Hülsmann

2004-04-01

Full Text Available The argument for distance education (including e-learning in developing countries could be imagined as a “triple jump.” Each leap of the triple jump consists of a theorem and a corollary applying it to developing countries.Theorem 1: Education is good for development. Corollary: The demand for education is especially high in the developing world. Traditional education cannot cope with its size and is, in many cases, not the most cost-effective allocation of resources.Theorem 2: Distance education can help. Corollary: Distance education is able to deal with large numbers more cost-effectively than traditional education, and has proved to do so also in developing countries.Theorem 3: E-learning is extending the capabilities of traditional distance education. Corollary: Given the emerging global information infrastructure, there are a number of cases where e-learning can enhance the capabilities of distance education in the developing world.Many distance educators would readily subscribe to theorems of leaps 1 and 2 of the triple jump, but argue that the argument collapses at leap 3, especially when it comes to the corollary suggesting that ICT-based distance education could be relevant in the developing world. This paper takes the role of the “devil’s advocate”1 , and will try to cast some doubt on the first two theorems, while intending to strengthen the third leap theorem, the least established argument of the three.

Abstract ID: 176 Geant4 implementation of inter-atomic interference effect in small-angle coherent X-ray scattering for materials of medical interest.

Science.gov (United States)

Paternò, Gianfranco; Cardarelli, Paolo; Contillo, Adriano; Gambaccini, Mauro; Taibi, Angelo

2018-01-01

Advanced applications of digital mammography such as dual-energy and tomosynthesis require multiple exposures and thus deliver higher dose compared to standard mammograms. A straightforward manner to reduce patient dose without affecting image quality would be removal of the anti-scatter grid, provided that the involved reconstruction algorithms are able to take the scatter figure into account [1]. Monte Carlo simulations are very well suited for the calculation of X-ray scatter distribution and can be used to integrate such information within the reconstruction software. Geant4 is an open source C++ particle tracking code widely used in several physical fields, including medical physics [2,3]. However, the coherent scattering cross section used by the standard Geant4 code does not take into account the influence of molecular interference. According to the independent atomic scattering approximation (the so-called free-atom model), coherent radiation is indistinguishable from primary radiation because its angular distribution is peaked in the forward direction. Since interference effects occur between x-rays scattered by neighbouring atoms in matter, it was shown experimentally that the scatter distribution is affected by the molecular structure of the target, even in amorphous materials. The most important consequence is that the coherent scatter distribution is not peaked in the forward direction, and the position of the maximum is strongly material-dependent [4]. In this contribution, we present the implementation of a method to take into account inter-atomic interference in small-angle coherent scattering in Geant4, including a dedicated data set of suitable molecular form factor values for several materials of clinical interest. Furthermore, we present scatter images of simple geometric phantoms in which the Rayleigh contribution is rigorously evaluated. Copyright © 2017.

Three Dimensional Fast Exact Euclidean Distance (3D-FEED) Maps

NARCIS (Netherlands)

Latecki, L.J.; Schouten, Theo E.; Mount, D.M.; Kuppens, Harco C.; Wu, A.Y.; van den Broek, Egon

2006-01-01

In image and video analysis, distance maps are frequently used. They provide the (Euclidean) distance (ED) of background pixels to the nearest object pixel. Recently, the Fast Exact Euclidean Distance (FEED) transformation was launched. In this paper, we present the three dimensional (3D) version of

80537 based distance relay

DEFF Research Database (Denmark)

Pedersen, Knud Ole Helgesen

1999-01-01

A method for implementing a digital distance relay in the power system is described.Instructions are given on how to program this relay on a 80537 based microcomputer system.The problem is used as a practical case study in the course 53113: Micocomputer applications in the power system.The relay...

Factors influencing social distance toward people with mental illness.

Science.gov (United States)

Lauber, Christoph; Nordt, Carlos; Falcato, Luis; Rössler, Wulf

2004-06-01

When identifying ways to reduce stigmatization because of mental illness it is crucial to understand contributing factors. Social distance-the willingness to engage in relationships of varying intimacy with a person--is an indicator of public attitudes toward persons with mental illness. Multiple linear regression analysis of the results of a vignette-based opinion survey conducted on a representative population sample in Switzerland (n = 594). The level of social distance increases if situations imply 'social closeness.' The vignette describing a person with schizophrenia, attitudes to general aspects of mental health (lay helping, community psychiatry), emotions toward those affected, and the attitude toward consequences of mental illness (medical treatment, medication side effects, negative sanctions, e.g. withdrawal of the driver license) were found to predict social distance. Demographic factors such as age, gender, and the cultural background influence social distance. The explained variance (R2) is 44.8%. Social distance is a multifaceted concept influenced by, e.g., socio-economic and cultural factors, but also by the respondent's general attitude toward (mental) health issues. These results suggest that more knowledge about mental illnesses, especially schizophrenia, may increase social distance. The findings presented here may help to focus anti-stigma campaigns not only on transmission of knowledge, but on integrating different approaches.

Catharsis – Philosophical and Spiritual Aspects of Long-Distance Running

Directory of Open Access Journals (Sweden)

Nemec Marcel

2016-05-01

Full Text Available The purpose of the study was to identify and analyze the occurrence of cathartic states in a sample of long-distance runners. Data collected via questionnaires were used to evaluate quantitative variables complemented by heuristics while aiming at qualitatively categorize the areas of cathartic states in the context of philosophical and spiritual aspects of long-distance running. The study findings objectify philosophical and spiritual aspects affecting personalities of long-distance runners. The study findings have shown that catharsis represents a relevant philosophical and spiritual aspect affecting long-distance running. We assume that authentic experience of catharsis and its effects motivates runners to perform regular physical activity. The analysis of philosophical and spiritual aspects of long-distance running has revealed a multi-spectral holistic relevance based on the transfer affecting a specific way of life, spectrum of values, ethical personality traits, and also the quality of long-distance runners’ lives.

Distance measurement using frequency scanning interferometry with mode-hoped laser

Science.gov (United States)

Medhat, M.; Sobee, M.; Hussein, H. M.; Terra, O.

2016-06-01

In this paper, frequency scanning interferometry is implemented to measure distances up to 5 m absolutely. The setup consists of a Michelson interferometer, an external cavity tunable diode laser, and an ultra-low expansion (ULE) Fabry-Pérot (FP) cavity to measure the frequency scanning range. The distance is measured by acquiring simultaneously the interference fringes from, the Michelson and the FP interferometers, while scanning the laser frequency. An online fringe processing technique is developed to calculate the distance from the fringe ratio while removing the parts result from the laser mode-hops without significantly affecting the measurement accuracy. This fringe processing method enables accurate distance measurements up to 5 m with measurements repeatability ±3.9×10-6 L. An accurate translation stage is used to find the FP cavity free-spectral-range and therefore allow accurate measurement. Finally, the setup is applied for the short distance calibration of a laser distance meter (LDM).

Climate change leads to decreasing bird migration distances

NARCIS (Netherlands)

Visser, M.E.; Perdeck, A.C.; van Balen, J.H.; Both, C.

2009-01-01

Global climate change has led to warmer winters in NW Europe, shortening the distance between suitable overwintering areas and the breeding areas of many bird species. Here we show that winter recovery distances have decreased over the past seven decades, for birds ringed during the breeding season

Climate change leads to decreasing bird migration distances

NARCIS (Netherlands)

Visser, Marcel E.; Perdeck, Albert C.; van Balen, Johan H.; Both, Christiaan

Global climate change has led to warmer winters in NW Europe, shortening the distance between suitable overwintering areas and the breeding areas of many bird species. Here we show that winter recovery distances have decreased over the past seven decades, for birds ringed during the breeding season

Some remarks on the small-distance derivative model

International Nuclear Information System (INIS)

Jannussis, A.

1985-01-01

In the present work the new expressions of the derivatives for small distance are investigated according to Gonzales-Diaz model. This model is noncanonical, is a particular case of the Lie-admissible formulation and has applications for distance and time scales comparable with the Planck dimensions

The Carnegie-Chicago Hubble Program. I. An Independent Approach to the Extragalactic Distance Scale Using Only Population II Distance Indicators

Science.gov (United States)

Beaton, Rachael L.; Freedman, Wendy L.; Madore, Barry F.; Bono, Giuseppe; Carlson, Erika K.; Clementini, Gisella; Durbin, Meredith J.; Garofalo, Alessia; Hatt, Dylan; Jang, In Sung; Kollmeier, Juna A.; Lee, Myung Gyoon; Monson, Andrew J.; Rich, Jeffrey A.; Scowcroft, Victoria; Seibert, Mark; Sturch, Laura; Yang, Soung-Chul

2016-12-01

We present an overview of the Carnegie-Chicago Hubble Program, an ongoing program to obtain a 3% measurement of the Hubble constant (H 0) using alternative methods to the traditional Cepheid distance scale. We aim to establish a completely independent route to H 0 using RR Lyrae variables, the tip of the red giant branch (TRGB), and Type Ia supernovae (SNe Ia). This alternative distance ladder can be applied to galaxies of any Hubble type, of any inclination, and, using old stars in low-density environments, is robust to the degenerate effects of metallicity and interstellar extinction. Given the relatively small number of SNe Ia host galaxies with independently measured distances, these properties provide a great systematic advantage in the measurement of H 0 via the distance ladder. Initially, the accuracy of our value of H 0 will be set by the five Galactic RR Lyrae calibrators with Hubble Space Telescope Fine-Guidance Sensor parallaxes. With Gaia, both the RR Lyrae zero-point and TRGB method will be independently calibrated, the former with at least an order of magnitude more calibrators and the latter directly through parallax measurement of tip red giants. As the first end-to-end “distance ladder” completely independent of both Cepheid variables and the Large Magellanic Cloud, this path to H 0 will allow for the high-precision comparison at each rung of the traditional distance ladder that is necessary to understand tensions between this and other routes to H 0. Based on observations made with the NASA/ESA Hubble Space Telescope, obtained at the Space Telescope Science Institute, which is operated by the Association of Universities for Research in Astronomy, Inc., under NASA contract NAS 5-26555. These observations are associated with programs #13472 and #13691.

Effect of Image Linearization on Normalized Compression Distance

Science.gov (United States)

Mortensen, Jonathan; Wu, Jia Jie; Furst, Jacob; Rogers, John; Raicu, Daniela

Normalized Information Distance, based on Kolmogorov complexity, is an emerging metric for image similarity. It is approximated by the Normalized Compression Distance (NCD) which generates the relative distance between two strings by using standard compression algorithms to compare linear strings of information. This relative distance quantifies the degree of similarity between the two objects. NCD has been shown to measure similarity effectively on information which is already a string: genomic string comparisons have created accurate phylogeny trees and NCD has also been used to classify music. Currently, to find a similarity measure using NCD for images, the images must first be linearized into a string, and then compared. To understand how linearization of a 2D image affects the similarity measure, we perform four types of linearization on a subset of the Corel image database and compare each for a variety of image transformations. Our experiment shows that different linearization techniques produce statistically significant differences in NCD for identical spatial transformations.

Collaborative distance learning: Developing an online learning community

Science.gov (United States)

Stoytcheva, Maria

2017-12-01

The method of collaborative distance learning has been applied for years in a number of distance learning courses, but they are relatively few in foreign language learning. The context of this research is a hybrid distance learning of French for specific purposes, delivered through the platform UNIV-RcT (Strasbourg University), which combines collaborative activities for the realization of a common problem-solving task online. The study focuses on a couple of aspects: on-line interactions carried out in small, tutored groups and the process of community building online. By analyzing the learner's perceptions of community and collaborative learning, we have tried to understand the process of building and maintenance of online learning community and to see to what extent the collaborative distance learning contribute to the development of the competence expectations at the end of the course. The analysis of the results allows us to distinguish the advantages and limitations of this type of e-learning and thus evaluate their pertinence.

Many-beam electron extinction distances in zirconium

International Nuclear Information System (INIS)

Cann, C.D.

1977-05-01

Many-beam extinction distances have been calculated for twenty-two of the lowest order reflections in zirconium. Ten beams comprising the directly transmitted and the nine lowest order systematic reflections were included in each calculation. Extinction distances for each reflection were determined for electron accelerating voltages of 100 and 200 kV, both at the exact Bragg condition and at deviations up to two Bragg angles from this condition. (author)

Student Identity and Authentication in Distance Education: A Primer for Distance Learning Administrators

Science.gov (United States)

Aceves, Patricia A.; Aceves, Robert I.

2009-01-01

Since the signing of the Higher Education Opportunity Act (HEOA) in August 2008, providers of distance education courses and programs have been looking into procedures and technologies that will satisfy the accrediting agencies responsible for enforcing the law. Continuing education administrators are at the forefront because of the pervasiveness…

Comparison of frequency-distance relationship and Gaussian-diffusion-based methods of compensation for distance-dependent spatial resolution in SPECT imaging

International Nuclear Information System (INIS)

Kohli, Vandana; King, Micgael A.; Glick, Stephen J.; Pan, Tin-Su

1998-01-01

The goal of this investigation was to compare resolution recovery versus noise level of two methods for compensation of distance-dependent resolution (DDR) in SPECT imaging. The two methods of compensation were restoration filtering based on the frequency-distance relationship (FDR) prior to iterative reconstruction, and modelling DDR in the projector/backprojector pair employed in iterative reconstruction. FDR restoration filtering was computationally faster than modelling the detector response in iterative reconstruction. Using Gaussian diffusion to model the detector response in iterative reconstruction sped up the process by a factor of 2.5 over frequency domain filtering in the projector/backprojector pair. Gaussian diffusion modelling resulted in a better resolution versus noise tradeoff than either FDR restoration filtering or solely modelling attenuation in the projector/backprojector pair of iterative reconstruction. For the pixel size investigated herein (0.317 cm), accounting for DDR in the projector/backprojector pair by Gaussian diffusion, or by applying a blurring function based on the distance from the face of the collimator at each distance, resulted in very similar resolution recovery and slice noise level. (author)

Opinion Mining in Online Reviews About Distance Education Programs

OpenAIRE

Jaskolski, Janik; Siegberg, Fabian; Tibroni, Thomas; Cimiano, Philipp; Klinger, Roman

2016-01-01

The popularity of distance education programs is increasing at a fast pace. En par with this development, online communication in fora, social media and reviewing platforms between students is increasing as well. Exploiting this information to support fellow students or institutions requires to extract the relevant opinions in order to automatically generate reports providing an overview of pros and cons of different distance education programs. We report on an experiment involving distance e...

Service Quality in Distance Education using the Gronroos Model

OpenAIRE

Hamid, Fazelina Sahul; Yip, Nick

2016-01-01

Demand for distance education programs have been increasing rapidly over the years. As a result, assessment of the quality of distance education programs has become a strategic issue that is very pertinent for program survival. This study uses Gronroos Model for assessing the service quality of the Malaysian distance education institutions. This model is chosen because it takes into account of the service delivery process and also service outcome. Our study confirms the multidimensional natur...

Average geodesic distance of skeleton networks of Sierpinski tetrahedron

Science.gov (United States)

Yang, Jinjin; Wang, Songjing; Xi, Lifeng; Ye, Yongchao

2018-04-01

The average distance is concerned in the research of complex networks and is related to Wiener sum which is a topological invariant in chemical graph theory. In this paper, we study the skeleton networks of the Sierpinski tetrahedron, an important self-similar fractal, and obtain their asymptotic formula for average distances. To provide the formula, we develop some technique named finite patterns of integral of geodesic distance on self-similar measure for the Sierpinski tetrahedron.