WorldWideScience

Sample records for integrity gainful employment-measures

  1. Leading Gainful Employment Metric Reporting

    Science.gov (United States)

    Powers, Kristina; MacPherson, Derek

    2016-01-01

    This chapter will address the importance of intercampus involvement in reporting of gainful employment student-level data that will be used in the calculation of gainful employment metrics by the U.S. Department of Education. The authors will discuss why building relationships within the institution is critical for effective gainful employment…

  2. Measurement of Antenna Bore-Sight Gain

    Science.gov (United States)

    Fortinberry, Jarrod; Shumpert, Thomas H.

    2016-01-01

    The absolute or free-field gain of a simple antenna can be approximated using standard antenna theory formulae or for a more accurate prediction, numerical methods may be employed to solve for antenna parameters including gain. Both of these methods will result in relatively reasonable estimates but in practice antenna gain is usually verified and documented via measurements and calibration. In this paper, a relatively simple and low-cost, yet effective means of determining the bore-sight free-field gain of a VHF/UHF antenna is proposed by using the Brewster angle relationship.

  3. Employment, work hours and weight gain among middle-aged women.

    Science.gov (United States)

    Au, N; Hauck, K; Hollingsworth, B

    2013-05-01

    To investigate the influence of employment and work hours on weight gain and weight loss among middle-aged women. Quantile regression techniques were used to estimate the influence of employment and hours worked on percentage weight change over 2 years across the entire distribution of weight change in a cohort of middle-aged women. A range of controls was included in the models to isolate the effect of work status. A total of 9276 women aged 45-50 years at baseline who were present in both the 1996 and 1998 surveys of the Australian Longitudinal Study of Women's Health. The women were a representative sample of the Australian population. Being out of the labour force or unemployed was associated with lower weight gain and higher weight loss than being employed. The association was stronger at low to moderate levels of weight gain. Among employed women, working regular (35-40), long (41-48) or very long (49+) hours was associated with increasingly higher levels of weight gain compared with working part-time hours. The association was stronger for women with greater weight gain overall. The association between unemployment and weight change became insignificant when health status was controlled for. Employment was associated with more weight gain and less weight loss. Among the employed, working longer hours was associated with more weight gain, especially at the higher levels of weight gain where the health consequences are more serious. These findings suggest that as women work longer hours they are more likely to make lifestyle choices that are associated with weight gain.

  4. 75 FR 63763 - Program Integrity: Gainful Employment

    Science.gov (United States)

    2010-10-18

    .... Name of individual who will be making the oral presentation on behalf of the commenter. E-mail address of the individual who will be making the oral presentation. If available, the number assigned to your... employment and this rulemaking are. To better understand parties' comments and have an opportunity to...

  5. Combined Cycle Power Generation Employing Pressure Gain Combustion

    Energy Technology Data Exchange (ETDEWEB)

    Holley, Adam [United Technologies Corporation, East Hartford, CT (United States). Research Center

    2017-05-15

    The Phase I program assessed the potential benefit of applying pressure gain combustion (PGC) technology to a natural gas combined cycle power plant. A conceptual design of the PGC integrated gas turbine was generated which was simulated in a detailed system modeling tool. The PGC integrated system was 1.93% more efficient, produced 3.09% more power, and reduced COE by 0.58%. Since the PGC system used had the same fuel flow rate as the baseline system, it also reduced CO2 emissions by 3.09%. The PGC system did produce more NOx than standard systems, but even with the performanceand cost penalties associated with the cleanup system it is better in every measure. This technology benefits all of DOE’s stated program goals to improve plant efficiency, reduce CO2 production, and reduce COE.

  6. 75 FR 66665 - Program Integrity: Gainful Employment-New Programs

    Science.gov (United States)

    2010-10-29

    ..., requires the GAO to conduct a study and report on issues pertaining to the oral health of children... response to, an initiative by a governmental entity, such as the oral health program with the Federal... already understand the employment demands in their field. The commenters also believed that because...

  7. 76 FR 34385 - Program Integrity: Gainful Employment-Debt Measures

    Science.gov (United States)

    2011-06-13

    ... bachelor's and master's degree programs, and 20 years for programs that lead to a doctoral or first...-risk and underserved populations of students; and limit the growth of, and innovation in, new programs... and to society in general, nor that they would represent a poor financial risk. Sen. Rep. No. 758...

  8. Combined optical gain and degradation measurements in DCM2 doped Tris-(8-hydroxyquinoline)aluminum thin-films

    Science.gov (United States)

    Čehovski, Marko; Döring, Sebastian; Rabe, Torsten; Caspary, Reinhard; Kowalsky, Wolfgang

    2016-04-01

    Organic laser sources offer the opportunity to integrate flexible and widely tunable lasers in polymer waveguide circuits, e.g. for Lab-on-Foil applications. Therefore, it is necessary to understand gain and degradation processes for long-term operation. In this paper we address the challenge of life-time (degradation) measurements of photoluminescence (PL) and optical gain in thin-film lasers. The well known guest-host system of aluminum-chelate Alq3 (Tris-(8-hydroxyquinoline)aluminum) as host material and the laser dye DCM2 (4-(Dicyanomethylene)-2- methyl-6-julolidyl-9-enyl-4H-pyran) as guest material is employed as laser active material. Sample layers have been built up by co-evaporation in an ultrahigh (UHV) vacuum chamber. 200nm thick films of Alq3:DCM2 with different doping concentrations have been processed onto glass and thermally oxidized silicon substrates. The gain measurements have been performed by the variable stripe length (VSL) method. This measurement technique allows to determine the thin-film waveguide gain and loss, respectively. For the measurements the samples were excited with UV irradiation (ƛ = 355nm) under nitrogen atmosphere by a passively Q-switched laser source. PL degradation measurements with regard to the optical gain have been done at laser threshold (approximately 3 μJ/cm2), five times above laser threshold and 10 times above laser threshold. A t50-PL lifetime of > 107 pulses could be measured at a maximum excitation energy density of 32 μJ/cm2. This allows for a detailed analysis of the gain degradation mechanism and therefore of the stimulated cross section. Depending on the DCM2 doping concentration C the stimulated cross section was reduced by 35 %. Nevertheless, the results emphasizes the necessity of the investigation of degradation processes in organic laser sources for long-term applications.

  9. Productive Employment in Romania: A Major Challenge to the Integration into the European Union

    Directory of Open Access Journals (Sweden)

    Emilia Herman

    2016-05-01

    Full Text Available It is widely accepted that productive employment represents an essential element of inclusive economic growth, and it can be a driving force in reducing gaps between countries (especially experienced by productivity and income in order for these to integrate into the European Union. The aim of the article is to highlight the process of integration from the perspective of productive employment and its main determinants, in Romania, in the period following accession to the EU and integration into the European economic structures, the 2007-2014 period respectively. The results of this paper highlight a low level of productive employment in Romania determined mainly by low labour productivity, low wages, high vulnerable employment, high and inefficient employment in agriculture and a low level of employment in knowledge-intensive activities. The existence of large gaps, in terms of productive employment and economic development, between Romania and the developed EU countries, as well as the existence of the highest in-work poverty risk in EU emphasizes the need to accelerate productivity growth, which requires a real structural transformation, a shift from low-productivity sectors to high-productivity sectors. However, it is very important that poor workers should significantly benefit from the gains in labour productivity. The findings of this study can be useful for policy makers in order to support the improvement of productive employment so that productive employment contributes efficiently to the real integration of Romania into the EU.

  10. Operational gain : measuring the capture of genetic gain ...

    African Journals Online (AJOL)

    The concept of operational gain is more than the weighted average of the genetic quality of planted hectares, and encompasses tree breeding efficiencies, propagation efficiencies, matching of species and genotype to site, plant use efficiency and early measures of stand density and growth. To test the operational gain ...

  11. Nonunity gain minimal-disturbance measurement

    DEFF Research Database (Denmark)

    Sabuncu, Metin; Mišta, L.; Fiurášek, J.

    2007-01-01

    We propose and experimentally demonstrate an optimal nonunity gain Gaussian scheme for partial measurement of an unknown coherent state that causes minimal disturbance of the state. The information gain and the state disturbance are quantified by the noise added to the measurement outcomes...

  12. An integrative model for measuring graduates’ employability skills—A study in China

    Directory of Open Access Journals (Sweden)

    Wenping Su

    2015-12-01

    Full Text Available Employability is a key issue in graduates’ job-hunting, but little research has been done on that of the graduates in Chinese universities. These universities have been experiencing a decline in their graduate employment since the past decade. This paper attempts to tackle this issue. It reviews the relevant research on employability and develops a research-based theoretical framework to evaluate and analyze the graduates’ employability in China. It adopts multiple approaches to establish the skills that will enhance university students’ employability. Investigating around 100 employers and 200 undergraduates from the universities in Beijing, the paper explores the characteristics of and factors influencing the graduates’ employability. Subsequently, it proposes a qualitative model to measure graduates’ employability. Based on the findings, it discusses the theoretical and practical implications and provides advice for Chinese graduates to improve their employability.

  13. Using Multilayered Substrate Integrated Waveguide to Design Microwave Gain Equalizer

    Directory of Open Access Journals (Sweden)

    Yongfei Wang

    2014-01-01

    Full Text Available This paper presents the design and experiment of a novel microwave gain equalizer based on the substrate integrated waveguide (SIW technique. The proposed equalizer is formed by an SIW loaded by SIW resonators, which has very compact structure and can compensate for gain slope of microwave systems. Equivalent circuit analysis is given about the proposed structure for a better insight into the structure’s response. A Ku-Band equalizer with four SIW resonators is simulated and fabricated with a multilayer printed circuit board process. The measured results show good performance and agreement with the simulated results; an attenuation slope of −4.5 dB over 12.5–13.5 GHz is reached with a size reduction of 76%.

  14. Measured stimulated Raman gain in methane

    International Nuclear Information System (INIS)

    Lopert, R.B.

    1983-01-01

    This report is about the stimulated Raman effect in methane due to the nu 1 vibration. For various gas pressures between 150 torr and 30 atm, the Raman lineshape function was both experimentally measured and synthesized using a computer model. The stimulated Raman gain was measured by sending a pump laser beam provided by an argon-ion laser and a weak probe beam provided by a tunable dye laser through a cell of methane gas. The stimulated Raman effect caused some of the energy from the pump beam to be transferred to the probe beam. The intensity of the pump beam was low so the gain of the probe beam was on the order of parts per million. A two detector arrangement and a differential amplifier system that had a feedback loop to balance the detectors was constructed to measure the small gains. A detailed description of this detection system that was able to measure gains as small as 0.2 parts per million is provided

  15. A differential low-voltage high gain current-mode integrated RF receiver front-end

    Energy Technology Data Exchange (ETDEWEB)

    Wang Chunhua; Ma Minglin; Sun Jingru; Du Sichun; Guo Xiaorong; He Haizhen, E-mail: wch1227164@sina.com [School of Information Science and Technology, Hunan University, Changsha 410082 (China)

    2011-02-15

    A differential low-voltage high gain current-mode integrated RF front end for an 802.11b WLAN is proposed. It contains a differential transconductance low noise amplifier (G{sub m}-LNA) and a differential current-mode down converted mixer. The single terminal of the G{sub m}-LNA contains just one MOS transistor, two capacitors and two inductors. The gate-source shunt capacitors, C{sub x1} and C{sub x2}, can not only reduce the effects of gate-source C{sub gs} on resonance frequency and input-matching impedance, but they also enable the gate inductance L{sub g1,2} to be selected at a very small value. The current-mode mixer is composed of four switched current mirrors. Adjusting the ratio of the drain channel sizes of the switched current mirrors can increase the gain of the mixer and accordingly increase the gain of RF receiver front-end. The RF front-end operates under 1 V supply voltage. The receiver RFIC was fabricated using a chartered 0.18 {mu}m CMOS process. The integrated RF receiver front-end has a measured power conversion gain of 17.48 dB and an input referred third-order intercept point (IIP3) of -7.02 dBm. The total noise figure is 4.5 dB and the power is only 14 mW by post-simulations. (semiconductor integrated circuits)

  16. Atmospheric aerosol measurements by employing a polarization scheimpflug lidar system

    Science.gov (United States)

    Mei, Liang; Guan, Peng; Yang, Yang

    2018-04-01

    A polarization Scheimpflug lidar system based on the Scheimpflug principle has been developed by employing a compact 808-nm multimode highpower laser diode and two highly integrated CMOS sensors in Dalian University of Technology (DLUT), Dalian, China. The parallel and orthogonal polarized backscattering signal are recorded by two 45 degree tilted image sensors, respectively. Atmospheric particle measurements were carried out by employing the polarization Scheimpflug lidar system.

  17. High Gain Antenna System Deployment Mechanism Integration, Characterization, and Lessons Learned

    Science.gov (United States)

    Parong, Fil; Russell, Blair; Garcen, Walter; Rose, Chris; Johnson, Chris; Huber, Craig

    2014-01-01

    The integration and deployment testing of the High Gain Antenna System for the Global Precipitation Measurement mission is summarized. The HGAS deployment mechanism is described. The gravity negation system configuration and its influence on vertical, ground-based, deployment tests are presented with test data and model predictions. A focus is made on the late discovery and resolution of a potentially mission degrading deployment interference condition. The interaction of the flight deployment mechanism, gravity negation mechanism, and use of dynamic modeling is described and lessons learned presented.

  18. A Functional Model for the Integration of Gains and Losses under Risk: Implications for the Measurement of Subjective Value

    Science.gov (United States)

    Viegas, Ricardo G.; Oliveira, Armando M.; Garriga-Trillo, Ana; Grieco, Alba

    2012-01-01

    In order to be treated quantitatively, subjective gains and losses (utilities/disutilities) must be psychologically measured. If legitimate comparisons are sought between them, measurement must be at least interval level, with a common unit. If comparisons of absolute magnitudes across gains and losses are further sought, as in standard…

  19. Nuclear plants gain integrated information systems

    International Nuclear Information System (INIS)

    Villavicencio-Ramirez, A.; Rodriquez-Alvarez, J.M.

    1994-01-01

    With the objective of simplifying the complex mesh of computing devices employed within nuclear power plants, modern technology and integration techniques are being used to form centralized (but backed up) databases and distributed processing and display networks. Benefits are immediate as a result of the integration and the use of standards. The use of a unique data acquisition and database subsystem optimizes the high costs of engineering, as this task is done only once for the life span of the system. This also contributes towards a uniform user interface and allows for graceful expansion and maintenance. This article features an integrated information system, Sistema Integral de Informacion de Proceso (SIIP). The development of this system enabled the Laguna Verde Nuclear Power plant to fully use the already existing universe of signals and its related engineering during all plant conditions, namely, start up, normal operation, transient analysis, and emergency operation. Integrated systems offer many advantages over segregated systems, and this experience should benefit similar development efforts in other electric power utilities, not only for nuclear but also for other types of generating plants

  20. Are physiotherapy students adequately prepared to successfully gain employment?

    Science.gov (United States)

    Jones, Mandy; McIntyre, Judith; Naylor, Sandra

    2010-06-01

    To explore the preparedness of final-year physiotherapy students for their progression into employment, and identify what universities can do to facilitate a smooth transition. A single-cohort study, utilising a qualitative design incorporating a survey followed by transcribed and coded semi-structured interviews. Interviews were held in the Placement and Careers Centre at Brunel University, London. Sixty final-year full- and part-time students participated in the survey, and 12 final-year full- and part-time students participated in the semi-structured interviews. Sixty students completed a questionnaire which explored their preparedness for employment. Questions related to the current job situation, the application process and the student's ideal first post. Responses from the questionnaire were analysed and discussed further through a digitally recorded interview. Twelve students were interviewed by an experienced interviewer from a non-physiotherapy background. Students felt unprepared for employment. Forty-seven per cent wanted a rotational post, but 26% would only spend 6 months and 39% would only spend 1 year looking for a job. Seventy-one percent would change career and 99% would work abroad if they were unable to secure a post in the UK. Most importantly, students could not identify transferable skills required by potential employers; only 25% cited effective communications, and 10% cited flexible working as a transferable skill. Self-management skills (e.g. prioritisation, time management and documentation) were not perceived as essential for employment. The job market requires physiotherapy graduates to possess transferable skills which can be applied to any situation. Many are integral to the profession and the undergraduate curriculum; however, analysis and assimilation of these skills cannot be assumed. Universities should reflect on their curriculum delivery to produce graduates who meet employers' expectations and make a smooth transition into the

  1. An offset tone based gain stabilization technique for mixed-signal RF measurement systems

    Energy Technology Data Exchange (ETDEWEB)

    Joshi, Gopal, E-mail: gjos@barc.gov.in [BARC, Mumbai 400085 (India); Motiwala, Paresh D.; Randale, G.D.; Singh, Pitamber [BARC, Mumbai 400085 (India); Agarwal, Vivek; Kumar, Girish [IIT Bombay, Powai, Mumbai 400076 (India)

    2015-09-21

    This paper describes a gain stabilization technique for a RF signal measurement system. A sinusoidal signal of known amplitude, phase and close enough in frequency is added to the main, to be measured RF signal at the input of the analog section. The system stabilizes this offset tone in the digital domain, as it is sampled at the output of the analog section. This process generates a correction factor needed to stabilize the magnitude of the gain of the analog section for the main RF signal. With the help of a simple calibration procedure, the absolute amplitude of the main RF signal can be measured. The technique is especially suited for a system that processes signals around a single frequency, employs direct signal conversion into the digital domain, and processes subsequent steps in an FPGA. The inherent parallel signal processing in an FPGA-based implementation allows a real time stabilization of the gain. The effectiveness of the technique is derived from the fact, that the gain stabilization stamped to the main RF signal measurement branch requires only a few components in the system to be inherently stable. A test setup, along with experimental results is presented from the field of RF instrumentation for particle accelerators. Due to the availability of a phase synchronized RF reference signal in these systems, the measured phase difference between the main RF and the RF reference is also stabilized using this technique. A scheme of the signal processing is presented, where a moving average filter has been used to filter out not only the unwanted frequencies, but also to separate the main RF signal from the offset tone signal. This is achieved by a suitable choice of sampling and offset tone frequencies. The presented signal processing scheme is suitable to a variety of RF measurement applications.

  2. Gain Scheduling of Observer-Based Controllers with Integral Action

    DEFF Research Database (Denmark)

    Trangbæk, Klaus; Stoustrup, Jakob; Bendtsen, Jan Dimon

    2006-01-01

     This paper presents a method for continuous gain scheduling of  observer-based controllers with integral action. Given two stabilising controllers for a given system, explicit state space formulae are presented, allowing to change gradually from one  controller to the other while preserving...

  3. Monolithically integrated quantum dot optical gain modulator with semiconductor optical amplifier for 10-Gb/s photonic transmission

    Science.gov (United States)

    Yamamoto, Naokatsu; Akahane, Kouichi; Umezawa, Toshimasa; Kawanishi, Tetsuya

    2015-03-01

    Short-range interconnection and/or data center networks require high capacity and a large number of channels in order to support numerous connections. Solutions employed to meet these requirements involve the use of alternative wavebands to increase the usable optical frequency range. We recently proposed the use of the T- and O-bands (Thousand band: 1000-1260 nm, Original band: 1260-1360 nm) as alternative wavebands because large optical frequency resources (>60 THz) can be easily employed. In addition, a simple and compact Gb/s-order high-speed optical modulator is a critical photonic device for short-range communications. Therefore, to develop an optical modulator that acts as a highfunctional photonic device, we focused on the use of self-assembled quantum dots (QDs) as a three-dimensional (3D) confined structure because QD structures are highly suitable for realizing broadband optical gain media in the T+O bands. In this study, we use the high-quality broadband QD optical gain to develop a monolithically integrated QD optical gain modulator (QD-OGM) device that has a semiconductor optical amplifier (QD-SOA) for Gb/s-order highspeed optical data generation in the 1.3-μm waveband. The insertion loss of the device can be compensated through the SOA, and we obtained an optical gain change of up to ~7 dB in the OGM section. Further, we successfully demonstrate a 10-Gb/s clear eye opening using the QD-OGM/SOA device with a clock-data recovery sequence at the receiver end. These results suggest that the monolithic QD-EOM/SOA is suitable for increasing the number of wavelength channels for smart short-range communications.

  4. Gain reduction measurements in transient stimulated Raman scattering

    NARCIS (Netherlands)

    Heeman, R.J.; Godfried, H.P

    1995-01-01

    Threshold energy measurements of transient rotational stimulated Raman scattering are compared to Raman conversion calculations from semiclassical theories using a simple concept of a gain reduction factor which expresses the reduction of the gain from its steady-state value due to transient

  5. The modulation of neural gain facilitates a transition between functional segregation and integration in the brain.

    Science.gov (United States)

    Shine, James M; Aburn, Matthew J; Breakspear, Michael; Poldrack, Russell A

    2018-01-29

    Cognitive function relies on a dynamic, context-sensitive balance between functional integration and segregation in the brain. Previous work has proposed that this balance is mediated by global fluctuations in neural gain by projections from ascending neuromodulatory nuclei. To test this hypothesis in silico, we studied the effects of neural gain on network dynamics in a model of large-scale neuronal dynamics. We found that increases in neural gain directed the network through an abrupt dynamical transition, leading to an integrated network topology that was maximal in frontoparietal 'rich club' regions. This gain-mediated transition was also associated with increased topological complexity, as well as increased variability in time-resolved topological structure, further highlighting the potential computational benefits of the gain-mediated network transition. These results support the hypothesis that neural gain modulation has the computational capacity to mediate the balance between integration and segregation in the brain. © 2018, Shine et al.

  6. A CMOS variable gain amplifier for PHENIX electromagnetic calorimeter and RICH energy measurements

    Energy Technology Data Exchange (ETDEWEB)

    Wintenberg, A.L.; Simpson, M.L.; Young, G.R. [Oak Ridge National Lab., TN (United States); Palmer, R.L.; Moscone, C.G.; Jackson, R.G. [Tennessee Univ., Knoxville, TN (United States)

    1996-12-31

    A variable gain amplifier (VGA) has been developed equalizing the gains of integrating amplifier channels used with multiple photomultiplier tubes operating from common high-voltage supplies. The PHENIX lead-scintillator electromagnetic calorimeter will operate in that manner, and gain equalization is needed to preserve the dynamic range of the analog memory and ADC following the integrating amplifier. The VGA is also needed for matching energy channel gains prior to forming analog sums for trigger purposes. The gain of the VGA is variable over a 3:1 range using a 5-bit digital control, and the risetime is held between 15 and 23 ns using switched compensation in the VGA. An additional feature is gated baseline restoration. Details of the design and results from several prototype devices fabricated in 1.2-{mu}m Orbit CMOS are presented.

  7. EEO Review : youth employment measures, 2010 - Malta

    OpenAIRE

    Debono, Manwel

    2010-01-01

    This report explores youth employment measures in Malta. It outlines the trends in youth employment. Then it examines measures taken to promote youth employment, focusing on school education and training policies, labour market and employment-related policies, and access to benefits. Finally, the report focuses on the roles of labour market actors in the promotion of youth employment.

  8. Locally specific measures for employment aimed at regional development

    Directory of Open Access Journals (Sweden)

    Vladimir Cini

    2013-12-01

    Full Text Available The oldest and largest sub-region in the world functioning on the principle of economic union is the European Union. The creation of a single market has initiated the process of conditional adjustment of markets in the EU member states, which has a significant impact on the social welfare of its citizens. It is necessary to tackle this issue by joint efforts within the European Union. As globalization processes push for economic integration and development of competitive advantage, the regions will have to make some challenging adjustments. The development tends to concentrate in highly competitive regions, while regions in the periphery lag behind. However, this pertains not only to the economic lag, but also to a potential negative political situation. Locally specific active employment policy measures are a continuation of the effort to make these measures more flexible. They refer to the Joint Assessment of Employment Policy Priorities and the IPA Human Resources Development Operational Programme - a regional policy instrument of the European Union. Both documents highlight the issue of disproportional development of regions, which requires special local measures and active labour market policy programmes. To reduce regional differences in development, it is necessary to invest more resources in the regions that lag behind. In this particular case, this means the counties in Croatia with high unemployment rates, a large number of registered unemployed persons and low employment rate. Consequently, this paper explains the importance of the adoption of locally specific measures for employment, which unfortunately did not take hold in the Republic of Croatia, and highlights the need for further decentralization of public services, with the aim of balancing regional development

  9. National Call for Organizational Change from Sheltered to Integrated Employment

    Science.gov (United States)

    Rogan, Patricia; Rinne, Susan

    2011-01-01

    Our purpose in this article is to contend that organizational change from sheltered to integrated employment is not only possible but necessary, and a federal Employment First agenda must be advanced. Findings are reported from interviews with senior managers from 10 organizations that have shifted their service delivery to community employment,…

  10. Air pollution policies in Europe: efficiency gains from integrating climate effects with damage costs to health and crops

    International Nuclear Information System (INIS)

    Tollefsen, Petter; Rypdal, Kristin; Torvanger, Asbjorn; Rive, Nathan

    2009-01-01

    Emissions of air pollutants cause damage to health and crops, but several air pollutants also have an effect on climate through radiative forcing. We investigate efficiency gains achieved by integrating climate impacts of air pollutants into air quality strategies for the EU region. The pollutants included in this study are SO 2 , NH 3 , VOC, CO, NO x , black carbon, organic carbon, PM 2.5 , and CH 4 . We illustrate the relative importance of climate change effects compared to damage to health and crops, as well as monetary gains of including climate change contributions. The analysis considers marginal abatement costs and compares air quality and climate damage in Euros. We optimize abatement policies with respect to both climate and health impacts, which imply implementing all measures that yield a net benefit. The efficiency gains of the integrated policy are in the order of 2.5 billion Euros, compared to optimal abatement based on health and crop damage only, justifying increased abatement efforts of close to 50%. Climate effect of methane is the single most important factor. If climate change is considered on a 20- instead of a 100-year time-scale, the efficiency gain almost doubles. Our results indicate that air pollution policies should be supplemented with climate damage considerations.

  11. Integrated all optical transmodulator circuits with non-linear gain elements and tunable optical fibers

    NARCIS (Netherlands)

    Kuindersma, P.I.; Leijtens, X.J.M.; Zantvoort, van J.H.C.; Waardt, de H.

    2012-01-01

    We characterize integrated InP circuits for high speed ‘all-optical’ signal processing. Single chip circuits act as optical transistors. Transmodulation is performed by non-linear gain sections. Integrated tunable filters give signal equalization in time domain.

  12. Interviewing in Virtual Worlds: A Phenomenological Study Exploring the Success Factors of Job Applicants Utilizing Second Life to Gain Employment

    Science.gov (United States)

    Koufoudakis-Whittington, Stefania

    2014-01-01

    This study explored the phenomenon of success factors of job applicants utilizing Second Life to gain employment. The study focused on identifying the perception of what qualified as a successful interview through the lived common experiences of 16 employment recruiters. The research problem was that a gap existed in scholarly research on…

  13. Perspectives on Employment Integration, Mental Illness and Disability, and Workplace Health

    Directory of Open Access Journals (Sweden)

    Nene Ernest Khalema

    2014-01-01

    Full Text Available This paper reviews the literature on the interplay between employment integration and retention of individuals diagnosed with mental health and related disability (MHRD. Specifically, the paper addresses the importance of an integrative approach, utilizing a social epidemiological approach to assess various factors that are related to the employment integration of individuals diagnosed with severe mental illness. Our approach to the review incorporates a research methodology that is multilayered, mixed, and contextual. The review examines the literature that aims to unpack employers’ understanding of mental illness and their attitudes, beliefs, and practices about employing workers with mental illness. Additionally we offer a conceptual framework entrenched within the social determinants of the mental health (SDOMH literature as a way to contextualize the review conclusions. This approach contributes to a holistic understanding of workplace mental health conceptually and methodologically particularly as practitioners and policy makers alike are grappling with better ways to integrate employees who are diagnosed with mental health and disabilities into to the workplace.

  14. Workplace Integration: Key Considerations for Internationally Educated Nurses and Employers

    Directory of Open Access Journals (Sweden)

    Zubeida Ramji

    2018-02-01

    Full Text Available Integration of internationally educated nurses (IENs in the workplace over the long term, has not been a clear focus in nursing. The role of the employer organization in facilitating workplace integration for IENs has also not been emphasized in research. The overall aim of this paper is to highlight findings from an instrumental qualitative case study research informed by critical social theory, which examined workplace integration of IENs. The study explored what is meant by ‘integration’ and how the employer organizational context affects workplace integration of IENs. A purposeful sample of twenty-eight participants was involved. The participants included: stakeholders from various vantage points within the case organization as well as IENs from diverse backgrounds who were beyond the process of transitioning into the Canadian workplace—they had worked in Canada for an average of eleven years. Four methods of data collection were used: semi-structured interviews; socio-demographic survey; review of documents; and focus group discussions (FGDs. Thematic analysis methods guided the within subcase analysis first, followed by an across subcase analysis. FGDs were used as a platform for member-checking to establish the credibility of study findings. The resulting definition and conceptual framework point to workplace integration of IENs as a two-way process requiring efforts on the part of the IENs as well as the employer organization. This paper elaborates on selected themes of how beyond transition, workplace integration entails IENs progressing on their leadership journey, while persevering to overcome challenges. Organizational factors such as workforce diversity, leadership commitment to equity and engagement with the broader community serve as critical enablers and the importance of workplaces striving to avoid common pitfalls in addressing the priority of IEN integration are also discussed. This paper concludes with implications and

  15. 75 FR 43615 - Program Integrity: Gainful Employment

    Science.gov (United States)

    2010-07-26

    ... Colleges, Sharon Tanner (1st alternate), National League for Nursing Accreditation Commission, and Ralph..., has long played an important role in the nation's system of postsecondary education and training. Many...

  16. Supported Employment in Connecticut: An Examination of Integration and Wage Outcomes.

    Science.gov (United States)

    Helms, Barbara L.; And Others

    1991-01-01

    Study of a sample of 93 individuals with disabilities participating in supported employment programs in Connecticut found that monthly wages and levels of integration increased significantly when compared to working situations prior to supported employment placement. (JDD)

  17. A Fast and Robust Method for Measuring Optical Channel Gain

    DEFF Research Database (Denmark)

    Harbo, Anders La-Cour; Stoustrup, Jakob; Villemoes, L.F.

    2000-01-01

    We present a numerically stable and computational simple method for fast and robust measurement of optical channel gain. By transmitting adaptively designed signals through the channel, good accuracy is possible even in severe noise conditions......We present a numerically stable and computational simple method for fast and robust measurement of optical channel gain. By transmitting adaptively designed signals through the channel, good accuracy is possible even in severe noise conditions...

  18. Performance evaluation of a burst-mode EDFA in an optical packet and circuit integrated network.

    Science.gov (United States)

    Shiraiwa, Masaki; Awaji, Yoshinari; Furukawa, Hideaki; Shinada, Satoshi; Puttnam, Benjamin J; Wada, Naoya

    2013-12-30

    We experimentally investigate the performance of burst-mode EDFA in an optical packet and circuit integrated system. In such networks, packets and light paths can be dynamically assigned to the same fibers, resulting in gain transients in EDFAs throughout the network that can limit network performance. Here, we compare the performance of a 'burst-mode' EDFA (BM-EDFA), employing transient suppression techniques and optical feedback, with conventional EDFAs, and those using automatic gain control and previous BM-EDFA implementations. We first measure gain transients and other impairments in a simplified set-up before making frame error-rate measurements in a network demonstration.

  19. Preventive effectiveness of pre-employment medical assessments

    NARCIS (Netherlands)

    de Kort, W.; van Dijk, F.

    1997-01-01

    Health gain, prevention of health loss, and avoidance of financial risk all seem to be driving forces for the use of pre-employment medical assessment. An attempt is made to measure the effect of implementing the pre-employment medical assessment on these end points. The anticipated maximum

  20. Family Perspectives on Integrated Employment for Adults with Intellectual and Developmental Disabilities

    Science.gov (United States)

    Gilson, Carly B.; Carter, Erik W.; Bumble, Jennifer L.; McMillan, Elise D.

    2018-01-01

    Families are essential partners in efforts to elevate the employment outcomes of adults with intellectual and developmental disabilities (IDD). We examined the employment-related expectations, preferences, and concerns of 673 parents and other family members of adults with IDD. Participants prioritized paid integrated employment over sheltered…

  1. Measurements and modeling of gain coefficients for neodymium laser glasses

    International Nuclear Information System (INIS)

    Linford, G.J.; Saroyan, R.A.; Trenholme, J.B.; Weber, M.J.

    1979-01-01

    Small-signal gain coefficients are reported for neodymium in silicate, phosphate, fluorophosphate, and fluoroberyllate laser glasses. Measurements were made in a disk amplifier under identical conditions. Using spectroscopic data as the input, amplifier gain is calculated as a fucntion of flashlamp energy, pumping pulse duration, disk thickness, and Nd-doping. The agreement between predicted and measured gains is generally with ;plus or minus;10 percent, consistent with experimental uncertainties in the model and the parameters used. The operating conditions which optimize amplifier performance and efficiency for a given laser glass may be found using spectroscopic data alone. This process can be extended to derive the most cost-effective staging of amplifier chains for fusion lasers. A discussion of the model and examples of calculations are presented

  2. 24-GHz LTCC Fractal Antenna Array SoP With Integrated Fresnel Lens

    KAUST Repository

    Ghaffar, Farhan A.

    2012-09-30

    A novel 24-GHz mixed low-temperature co-fired ceramic (LTCC) tape based system-on-package (SoP) is presented, which incorporates a fractal antenna array with an integrated grooved Fresnel lens. The four-element fractal array employs a relatively low dielectric constant substrate (CT707, εr = 6.4), whereas the lens has been realized on a high-dielectric-constant superstrate (CT765, εr = 68.7 ). The two (substrate and superstrate) are integrated through four corner posts to realize the required air gap (focal distance). The fractal array alone provides a measured gain of 8.9 dBi. Simulations predict that integration of this array with the lens increases the gain by 6 dB. Measurements reveal that the design is susceptible to LTCC fabrication tolerances. In addition to high gain, the SoP provides a bandwidth of 8%. The high performance and compact size (24 × 24 × 4.8 mm3 ) of the design makes it highly suitable for emerging wireless applications such as automotive radar front end.

  3. Workplace Integration: Key Considerations for Internationally Educated Nurses and Employers

    OpenAIRE

    Zubeida Ramji; Josephine Etowa

    2018-01-01

    Integration of internationally educated nurses (IENs) in the workplace over the long term, has not been a clear focus in nursing. The role of the employer organization in facilitating workplace integration for IENs has also not been emphasized in research. The overall aim of this paper is to highlight findings from an instrumental qualitative case study research informed by critical social theory, which examined workplace integration of IENs. The study explored what is meant by ‘integration’ ...

  4. Integrated Management of Migration, Employment, Fiscal Policy and Public Debt

    Directory of Open Access Journals (Sweden)

    Aleksandras Vytautas Rutkauskas

    2013-09-01

    Full Text Available The main idea of the paper states that national migration indicators are closely related with employment opportunities in that country. In addition, the management quality of migration and employment processes is an indicator of the national socio-economic policy competency, while management of these processes is the main purpose of intelligent adjustment of the national fiscal policy and government debt management. The author of the paper selected the formation of the system of quantitative indicators as the main objective of the paper. The system should allow employing government debt possibilities for the selection of proper fiscal policy in order to prevent the transformation of unemployment into the key reason of uncontrolled national inflation. This would be done by revealing the possibilities of fiscal policy to impact on the level and structure of unemployment. Recent globalisation processes and integration possibilities bring a lot of uncertainty to predetermined viability of theoretical assumptions as well as the adequacy of the applied quantitative methods. The paper uses the possibilities of stochastic optimisation and stochastically informed expertise pursuing the possibilities of integrated management of employment, migration processes, fiscal policy and government debt provisions.

  5. Cost and quality gains from diversification and vertical integration in the electricity industry: A DEA approach

    International Nuclear Information System (INIS)

    Arocena, Pablo

    2008-01-01

    This paper analyzes the degree of economies of vertical integration, diversification and scale in the electricity industry by means of Data Envelopment Analysis. We estimate the impact that alternative forms of unbundling would have on the cost and quality of supply, measured as the number and duration of supply interruptions, in a group of Spanish electric utilities. We find evidence of the existence of cost and quality gains from integrating power generation and distribution in the range of 1.1 to 4.9%, whereas diversifying the source of power generation saves between 1.3 and 4.3% of costs and quality. Finally, the scale efficiency of the largest utilities could be improved by dividing them into smaller units, provided that their current vertical scope and generation-mix are preserved. (author)

  6. Cost and quality gains from diversification and vertical integration in the electricity industry: A DEA approach

    Energy Technology Data Exchange (ETDEWEB)

    Arocena, Pablo [Universidad Publica de Navarra, Dpto. Gestion de Empresas, Campus de Arrosadia, 31006 Pamplona (Spain)

    2008-01-15

    This paper analyzes the degree of economies of vertical integration, diversification and scale in the electricity industry by means of Data Envelopment Analysis. We estimate the impact that alternative forms of unbundling would have on the cost and quality of supply, measured as the number and duration of supply interruptions, in a group of Spanish electric utilities. We find evidence of the existence of cost and quality gains from integrating power generation and distribution in the range of 1.1 to 4.9%, whereas diversifying the source of power generation saves between 1.3 and 4.3% of costs and quality. Finally, the scale efficiency of the largest utilities could be improved by dividing them into smaller units, provided that their current vertical scope and generation-mix are preserved. (author)

  7. The experience of seeking, gaining and maintaining employment after traumatic spinal cord injury and the vocational pathways involved.

    Science.gov (United States)

    Hilton, Gillean; Unsworth, Carolyn A; Stuckey, Ruth; Murphy, Gregory C

    2018-01-01

    Vocational potential in people with spinal cord injury (SCI) are unrealised with rates of employment substantially lower than in the labour force participation of the general population and the pre-injury employment rates. To understand the experience and pathway of people achieving employment outcome after traumatic spinal cord injury by; classifying participants into employment outcome groups of stable, unstable and without employment; identifying pre and post-injury pathways for participants in each group and, exploring the experiences of people of seeking, gaining and maintaining employment. Thirty-one participants were interviewed. Mixed methods approach including interpretive phenomenological analysis and vocational pathway mapping of quantitative data. The most common pathway identified was from study and work pre-injury to stable employment post-injury. Four super-ordinate themes were identified from the interpretive phenomenological analysis; expectations of work, system impacts, worker identity and social supports. Implications for clinical practice include fostering cultural change, strategies for system navigation, promotion of worker identity and optimal use of social supports. The findings increase insight and understanding of the complex experience of employment after spinal cord injury. There is opportunity to guide experimental research, policy development and education concerning the complexity of the return to work experience and factors that influence pathways.

  8. Optimal distribution of integration time for intensity measurements in Stokes polarimetry.

    Science.gov (United States)

    Li, Xiaobo; Liu, Tiegen; Huang, Bingjing; Song, Zhanjie; Hu, Haofeng

    2015-10-19

    We consider the typical Stokes polarimetry system, which performs four intensity measurements to estimate a Stokes vector. We show that if the total integration time of intensity measurements is fixed, the variance of the Stokes vector estimator depends on the distribution of the integration time at four intensity measurements. Therefore, by optimizing the distribution of integration time, the variance of the Stokes vector estimator can be decreased. In this paper, we obtain the closed-form solution of the optimal distribution of integration time by employing Lagrange multiplier method. According to the theoretical analysis and real-world experiment, it is shown that the total variance of the Stokes vector estimator can be significantly decreased about 40% in the case discussed in this paper. The method proposed in this paper can effectively decrease the measurement variance and thus statistically improves the measurement accuracy of the polarimetric system.

  9. Measuring Knowledge Integration Learning of Energy Topics: A Two-Year Longitudinal Study

    Science.gov (United States)

    Liu, Ou Lydia; Ryoo, Kihyun; Linn, Marcia C.; Sato, Elissa; Svihla, Vanessa

    2015-01-01

    Although researchers call for inquiry learning in science, science assessments rarely capture the impact of inquiry instruction. This paper reports on the development and validation of assessments designed to measure middle-school students' progress in gaining integrated understanding of energy while studying an inquiry-oriented curriculum. The…

  10. Beam based measurement of beam position monitor electrode gains

    Directory of Open Access Journals (Sweden)

    D. L. Rubin

    2010-09-01

    Full Text Available Low emittance tuning at the Cornell Electron Storage Ring (CESR test accelerator depends on precision measurement of vertical dispersion and transverse coupling. The CESR beam position monitors (BPMs consist of four button electrodes, instrumented with electronics that allow acquisition of turn-by-turn data. The response to the beam will vary among the four electrodes due to differences in electronic gain and/or misalignment. This variation in the response of the BPM electrodes will couple real horizontal offset to apparent vertical position, and introduce spurious measurements of coupling and vertical dispersion. To alleviate this systematic effect, a beam based technique to measure the relative response of the four electrodes has been developed. With typical CESR parameters, simulations show that turn-by-turn BPM data can be used to determine electrode gains to within ∼0.1%.

  11. Beam based measurement of beam position monitor electrode gains

    Science.gov (United States)

    Rubin, D. L.; Billing, M.; Meller, R.; Palmer, M.; Rendina, M.; Rider, N.; Sagan, D.; Shanks, J.; Strohman, C.

    2010-09-01

    Low emittance tuning at the Cornell Electron Storage Ring (CESR) test accelerator depends on precision measurement of vertical dispersion and transverse coupling. The CESR beam position monitors (BPMs) consist of four button electrodes, instrumented with electronics that allow acquisition of turn-by-turn data. The response to the beam will vary among the four electrodes due to differences in electronic gain and/or misalignment. This variation in the response of the BPM electrodes will couple real horizontal offset to apparent vertical position, and introduce spurious measurements of coupling and vertical dispersion. To alleviate this systematic effect, a beam based technique to measure the relative response of the four electrodes has been developed. With typical CESR parameters, simulations show that turn-by-turn BPM data can be used to determine electrode gains to within ˜0.1%.

  12. Measurement of H'(0.07) with pulse height weighting integration method

    International Nuclear Information System (INIS)

    Liye, LIU; Gang, JIN; Jizeng, MA

    2002-01-01

    H'(0.07) is an important quantity for radiation field measurement in health physics. One of the plastic scintillator measurement methods is employing the weak current produced by PMT. However, there are some weaknesses in the current method. For instance: sensitive to environment humidity and temperature, non-linearity energy response. In order to increase the precision of H'(0.07) measurement, a Pulse Height Weighting Integration Method is introduced for its advantages: low noise, high sensitivity, data processable, wide measurement range. Pulse Height Weighting Integration Method seems to be acceptable to measure directional dose equivalent. The representative theoretical energy response of the pre-described method accords with the preliminary experiment result

  13. Small signal gain measurements in a small scale HF overtone laser

    Energy Technology Data Exchange (ETDEWEB)

    Wisniewski, C.F.; Hewett, K.B.; Manke, G.C. II; Hager, G.D. [Air Force Research Laboratory, Directed Energy Directorate, 3550 Aberdeen Ave SE, Kirtland AFB, NM 87117-5776 (United States); Crowell, P.G. [Northrup Grumman Information Technology, Science and Technology Operating Unit, Advanced Technology Division, P.O. Box 9377, Albuquerque, NM 87119-9377 (United States); Truman, C.R. [Mechanical Engineering Department, University of New Mexico, Albuquerque, NM 87131 (United States)

    2003-07-01

    The overtone gain medium of a small-scale HF overtone laser was probed using a sub-Doppler tunable diode laser. Two-dimensional spatially resolved small signal gain and temperature maps were generated for several ro-vibrational transitions in the HF (v=2{yields}v=0) overtone band. Our results compare well with previous measurements of the overtone gain in a similar HF laser device. (orig.)

  14. Gain measurements of the Ca-Xe charge exchange system. [for UV lasers

    Science.gov (United States)

    Michels, C. J.; Chubb, D. L.

    1978-01-01

    Charge-exchange-pumped Ca(+) was studied for possible positive laser gain at 370.6 and 315.9 nm using an Xe MPD arc as the Xe(+) source. The present paper describes the MPD arc, the calcium injection system, the diagnostics for gain, and spontaneous emission measurements and results. No positive gain measurements were observed. A small Xe-Ca charge exchange cross section compared to He-metal laser systems charge exchange cross sections is the most probable reason why the result was negative.

  15. HIV/AIDS and Employment Research: A Need for an Integrative Approach

    Science.gov (United States)

    Conyers, Liza Marie

    2008-01-01

    This article provides a reflection on the three articles that compose the Major Contribution on HIV/AIDS and employment research. It highlights the merits of the contribution in the broader context of HIV/AIDS employment research and recommends future directions for this area of inquiry, including theory integration, an investigation of HIV health…

  16. Gain stabilization circuit of measuring devices with photomultipliers

    International Nuclear Information System (INIS)

    Seda, J.; Sabol, J.

    1974-01-01

    A circuit is designed for the stabilization of the gain of measuring devices with photomultipliers, suitable especially for the stabilization of scintillation detection systems, in which the correction signal is applied to the photomultiplier grid placed between the photocathode and the first dynode. (J.K.)

  17. Measuring the Gains from International Trade Allocated Across Countries

    OpenAIRE

    Chung, Dongsik

    2004-01-01

    The intraindustry trade, multiple posttrade equilibria and multiple pretrade equilibria almost invalidate the role of the terms of trade as a divider of trade gains and as a predictor of the direction of trade. The indices of international trade benefits (ITB), which will be developed in this paper, aim at complementing what the terms of trade lacks as well as making it possible to utilize the estimated trade gains in a meaningful manner.The indices relatively measure the portion that a tradi...

  18. Gain and index measurements in GaAlAs quantum well lasers

    Energy Technology Data Exchange (ETDEWEB)

    Kesler, M.P.; Harder, C. (IBM Research Division, Zurich Research Lab., 8803 Ruschlikon (CH))

    1990-07-01

    Measurements of the modal gain and group index in GaAlAs single quantum well (SQW) lasers are presented. The elimination of substrate emission has allowed accurate results to be obtained even in the near bandgap and below spectral regions. Substantial lifetime broadening is observed, and the gain smoothly goes to zero as the bandgap is approached. The group velocity index measurements indicate a dispersion of {minus} 3.44 {mu}m{sup {minus}}.

  19. A new approach in measuring graduate employability skills

    Science.gov (United States)

    Zakaria, Mohd Hafiz; Yatim, Bidin; Ismail, Suzilah

    2014-06-01

    Globalization makes graduate recruitment for an organization becomes more complex because employers believe that a holistic workforce is the key success of an organization. Currently, although graduates are said to possess specific skills but they still lack of employability skills, and this lead to increment of training cost either by government or even employers. Therefore, graduate level of employability skills should be evaluated before entering work market. In this study, a valid and reliable instrument embedding a new approach of measuring employability skills was developed using Situational Judgment Test (SJT). The instrument comprises of twelve (12) items measuring communication skill, professional ethics and morality, entrepreneurial skill, critical thinking in problem solving and personal quality. Instrument's validity was achieved through expert opinion and the reliability (in terms of stability) was based on the Chi-Square for homogeneity test. Generally, the instrument is beneficial to graduates, employers, government agencies, university, and workforce recruitment agencies when evaluating the level of employability skills.

  20. 78 FR 74125 - Agency Information Collection Activities; Comment Request; Measuring Educational Gain in the...

    Science.gov (United States)

    2013-12-10

    ...; Comment Request; Measuring Educational Gain in the National Reporting System for Adult Education AGENCY... Educational Gain in the National Reporting System for Adult Education. OMB Control Number: 1830-0567. Type of... tests to measure and report educational gain under the NRS. Dated: December 4, 2013. Tomakie Washington...

  1. Opening the Black-Box in Lifelong E-Learning for Employability: A Framework for a Socio-Technical E-Learning Employability System of Measurement (STELEM

    Directory of Open Access Journals (Sweden)

    Juan-Francisco Martínez-Cerdá

    2018-03-01

    Full Text Available Human beings must develop many skills to cope with the large amount of challenges that currently exist in the world: media empowerment for an active and democratic citizenship, knowledge acquisition and conversion for lifelong and life-wide learning, 21st century skills for matching demand and supply in labor markets, and dispositional employability for unpredictable future career success. One of the tools for achieving these is online education, in which students have the chance to manage their own time, content, and goals. Thus, this paper analyzes these issues from the perspective of skills gained through e-learning and validates the Socio-Technical E-learning Employability System of Measurement (STELEM framework. The research was carried out with former students of the Universitat Oberta de Catalunya. Exploratory and confirmatory factorial analyses validate several consistent and reliable scales in two areas: (i employability, based on educational social capital, media empowerment, knowledge acquisition, knowledge conversion, literacy, digitalness, collaboration, resilience, proactivity, identity, openness, motivation, organizational culture, and employment security; and (ii socio-technical systems existing in this open online university, based on its information and communications technology (ICT, learning tasks, as well as student-centered and organizational approaches. The research provides two new psychometrical scales that are useful for the evaluation, monitoring, and assessment of relationships and influences between socio-technical e-learning organizations and employability skills development, and proposes a set of indicators related to human and social capital, valid in employability contexts.

  2. A cable-free impedance and gain measurement technique for electrically small antennas

    DEFF Research Database (Denmark)

    Pivnenko, Sergey; Zhang, Jiaying; Breinbjerg, Olav

    2010-01-01

    are represented in terms of spherical wave expansions (SWEs), and the propagation is accounted for by a transmission formula. In this paper the measurement results by the proposed technique will be presented for several AUTs, including a standard gain horn antenna, a monopole antenna, and an electrically small......Impedance and gain measurements for electrically small antennas represent a great challenge due to influences of the feeding cable. The leaking current along the cable and scattering effects are two main issues caused by the feed line. In this paper, a novel cable-free antenna impedance and gain...... measurement technique for electrically small antennas is proposed. The antenna properties are extracted by measuring the signal scattered by the antenna under test (AUT), when it is loaded with three known loads. The technique is based on a rigorous electromagnetic model where the probe and AUT...

  3. Low-Gain, Low-Noise Integrated Neuronal Amplifier for Implantable Artifact-Reduction Recording System

    Directory of Open Access Journals (Sweden)

    Abdelhamid Benazzouz

    2013-09-01

    Full Text Available Brain neuroprostheses for neuromodulation are being designed to monitor the neural activity of the brain in the vicinity of the region being stimulated using a single macro-electrode. Using a single macro-electrode, recent neuromodulation studies show that recording systems with a low gain neuronal amplifier and successive amplifier stages can reduce or reject stimulation artifacts. These systems were made with off-the-shelf components that are not amendable for future implant design. A low-gain, low-noise integrated neuronal amplifier (NA with the capability of recording local field potentials (LFP and spike activity is presented. In vitro and in vivo characterizations of the tissue/electrode interface, with equivalent impedance as an electrical model for recording in the LFP band using macro-electrodes for rodents, contribute to the NA design constraints. The NA occupies 0.15 mm2 and dissipates 6.73 µW, and was fabricated using a 0.35 µm CMOS process. Test-bench validation indicates that the NA provides a mid-band gain of 20 dB and achieves a low input-referred noise of 4 µVRMS. Ability of the NA to perform spike recording in test-bench experiments is presented. Additionally, an awake and freely moving rodent setup was used to illustrate the integrated NA ability to record LFPs, paving the pathway for future implantable systems for neuromodulation.

  4. Integrating sphere based reflectance measurements for small-area semiconductor samples

    Science.gov (United States)

    Saylan, S.; Howells, C. T.; Dahlem, M. S.

    2018-05-01

    This article describes a method that enables reflectance spectroscopy of small semiconductor samples using an integrating sphere, without the use of additional optical elements. We employed an inexpensive sample holder to measure the reflectance of different samples through 2-, 3-, and 4.5-mm-diameter apertures and applied a mathematical formulation to remove the bias from the measured spectra caused by illumination of the holder. Using the proposed method, the reflectance of samples fabricated using expensive or rare materials and/or low-throughput processes can be measured. It can also be incorporated to infer the internal quantum efficiency of small-area, research-level solar cells. Moreover, small samples that reflect light at large angles and develop scattering may also be measured reliably, by virtue of an integrating sphere insensitive to directionalities.

  5. Employer-driven consumerism: integrating health into the business model.

    Science.gov (United States)

    Thompson, Michael; Checkley, Joseph

    2006-01-01

    Consumer-driven health care is a misnomer. Notwithstanding the enormous role the individual consumer has to play in reshaping the U.S. health care delivery system, this article will focus on the employer as the key driver of change and innovation in the consumerism revolution. American Standard provides a case study of how one major employer has evaluated health care in the context of its business and aggressively integrated consumerism and health into the core of its business. Other companies will appropriately execute consumerism strategies in a fashion consistent with their own needs, culture, resources and populations. However, the principles supporting those strategies will be very much consistent.

  6. Measurements of gain and index dynamics in quantum dash semiconductor optical amplifiers

    DEFF Research Database (Denmark)

    Poel, Mike van der; Berg, Tommy Winther; Mørk, Jesper

    2004-01-01

    Ultrafast gain and index recovery of a 1.5um quantum dash amplifier after short pulse amplification is measured using pump-probe spectroscopy. The major part of the gain reduction is found to recover within a few picoseconds....

  7. Gains from an integrated market for tradable renewable energy credits

    International Nuclear Information System (INIS)

    Mozumder, Pallab; Marathe, Achla

    2004-01-01

    Decoupling the environmental attributes of renewable energy (RE) generation from the physical unit of energy is an innovative mechanism for marketing green or renewable power. The introduction of 'Tradable Renewable Energy Credits' (TRECs) allows the green power attributes of energy to be sold or traded separately from the physical unit of energy. Since the green power certificate system removes potential locational and physical bottlenecks, both suppliers and consumers gain flexibility in the marketplace. The TREC is also an efficient tool to meet 'Renewable Portfolio Standard' (RPS) required by different states in the US. This paper discusses the RPS requirements for different states and examines the implications of an integrated TREC market. It offers a competitive setting to the consumers to pay for renewable energy and a cost effective tool to support renewable energy generation [Grace and Wiser, 2002]. This paper also highlights some practical difficulties that should be addressed in order to establish an efficient integrated TREC market

  8. Measurements of complex impedance in microwave high power systems with a new bluetooth integrated circuit.

    Science.gov (United States)

    Roussy, Georges; Dichtel, Bernard; Chaabane, Haykel

    2003-01-01

    By using a new integrated circuit, which is marketed for bluetooth applications, it is possible to simplify the method of measuring the complex impedance, complex reflection coefficient and complex transmission coefficient in an industrial microwave setup. The Analog Devices circuit AD 8302, which measures gain and phase up to 2.7 GHz, operates with variable level input signals and is less sensitive to both amplitude and frequency fluctuations of the industrial magnetrons than are mixers and AM crystal detectors. Therefore, accurate gain and phase measurements can be performed with low stability generators. A mechanical setup with an AD 8302 is described; the calibration procedure and its performance are presented.

  9. Analysis and interpretation of geophysical surveys in archaeological sites employing different integrated approach.

    Science.gov (United States)

    Piro, Salvatore; Papale, Enrico; Kucukdemirci, Melda; Zamuner, Daniela

    2017-04-01

    Non-destructive ground surface geophysical prospecting methods are frequently used for the investigation of archaeological sites, where a detailed physical and geometrical reconstructions of hidden volumes is required prior to any excavation work. All methods measure the variations of single physical parameters, therefore if these are used singularly, they could not permit a complete location and characterization of anomalous bodies. The probability of a successful result rapidly increases if a multhimethodological approach is adopted, according to the logic of objective complementarity of information and of global convergence toward a high quality multiparametric imaging of the buried structures. The representation of the static configuration of the bodies in the subsoil and of the space-time evolution of the interaction processes between targets and hosting materials have to be actually considered fundamental elements of primary knowledge in archaeological prospecting. The main effort in geophysical prospecting for archaeology is therefore the integration of different, absolutely non-invasive techniques, especially if managed in view of a ultra-high resolution three-dimensional (3D) tomographic representation mode. Following the above outlined approach, we have integrated geophysical methods which measure the variations of potential field (gradiometric methods) with active methods which measure the variations of physical properties due to the body's geometry and volume (GPR and ERT). In this work, the results obtained during the surveys of three archaeological sites, employing Ground Penetrating Radar (GPR), Electrical Resistivity Tomography (ERT) and Fluxgate Differential Magnetic (FDM) to obtain precise and detailed maps of subsurface bodies, are presented and discussed. The first site, situated in a suburban area between Itri and Fondi, in the Aurunci Natural Regional Park (Central Italy), is characterized by the presence of remains of past human activity

  10. Predicting the gain from deliquification measures for European wells

    NARCIS (Netherlands)

    Nennie, E.D.; Boer, J.P. de; Schiferli, W.

    2014-01-01

    Various Dutch operators have identified a need for increased application of deliquification measures in their North Sea wells. To help meet this need a Joint Industry Project (JIP) was set up to identify knowledge and experience gained in the United States on gas well deliquification and transfer

  11. Measurements of diversity gain and radiation efficiency of the eleven antenna by using different measurement techniques

    DEFF Research Database (Denmark)

    Yang, Jian; Pivnenko, Sergey; Laitinen, Tommi

    2010-01-01

    This paper presents measurement results of diversity gain and radiation efficiency by using three different measurement techniques: reverberation chamber, spherical near-field anechoic chamber, and multi-probe anechoic chamber. The results are measured over a large 2–8 GHz bandwidth which...

  12. Radiation hardness of thin Low Gain Avalanche Detectors

    Science.gov (United States)

    Kramberger, G.; Carulla, M.; Cavallaro, E.; Cindro, V.; Flores, D.; Galloway, Z.; Grinstein, S.; Hidalgo, S.; Fadeyev, V.; Lange, J.; Mandić, I.; Medin, G.; Merlos, A.; McKinney-Martinez, F.; Mikuž, M.; Quirion, D.; Pellegrini, G.; Petek, M.; Sadrozinski, H. F.-W.; Seiden, A.; Zavrtanik, M.

    2018-05-01

    Low Gain Avalanche Detectors (LGAD) are based on a n++-p+-p-p++ structure where an appropriate doping of the multiplication layer (p+) leads to high enough electric fields for impact ionization. Gain factors of few tens in charge significantly improve the resolution of timing measurements, particularly for thin detectors, where the timing performance was shown to be limited by Landau fluctuations. The main obstacle for their operation is the decrease of gain with irradiation, attributed to effective acceptor removal in the gain layer. Sets of thin sensors were produced by two different producers on different substrates, with different gain layer doping profiles and thicknesses (45, 50 and 80 μm). Their performance in terms of gain/collected charge and leakage current was compared before and after irradiation with neutrons and pions up to the equivalent fluences of 5 ṡ 1015 cm-2. Transient Current Technique and charge collection measurements with LHC speed electronics were employed to characterize the detectors. The thin LGAD sensors were shown to perform much better than sensors of standard thickness (∼300 μm) and offer larger charge collection with respect to detectors without gain layer for fluences gain prolongs the beneficial performance of LGADs. Pions were found to be more damaging than neutrons at the same equivalent fluence, while no significant difference was found between different producers. At very high fluences and bias voltages the gain appears due to deep acceptors in the bulk, hence also in thin standard detectors.

  13. Measure and integration theory

    CERN Document Server

    Burckel, Robert B

    2001-01-01

    This book gives a straightforward introduction to the field as it is nowadays required in many branches of analysis and especially in probability theory. The first three chapters (Measure Theory, Integration Theory, Product Measures) basically follow the clear and approved exposition given in the author's earlier book on ""Probability Theory and Measure Theory"". Special emphasis is laid on a complete discussion of the transformation of measures and integration with respect to the product measure, convergence theorems, parameter depending integrals, as well as the Radon-Nikodym theorem. The fi

  14. CW gain measurements in small-bore argon-ion laser discharges using a novel modulation technique

    International Nuclear Information System (INIS)

    Bennett, W.R. Jr.; Sze, R.C.

    1974-01-01

    A technique for small-signal gain measurements for cw laser systems is described. The method is applied to the measurement of multimode small-signal gain coefficients of small-bone argon-ion laser transitions. (U.S.)

  15. Optimal distribution of integration time for intensity measurements in degree of linear polarization polarimetry.

    Science.gov (United States)

    Li, Xiaobo; Hu, Haofeng; Liu, Tiegen; Huang, Bingjing; Song, Zhanjie

    2016-04-04

    We consider the degree of linear polarization (DOLP) polarimetry system, which performs two intensity measurements at orthogonal polarization states to estimate DOLP. We show that if the total integration time of intensity measurements is fixed, the variance of the DOLP estimator depends on the distribution of integration time for two intensity measurements. Therefore, by optimizing the distribution of integration time, the variance of the DOLP estimator can be decreased. In this paper, we obtain the closed-form solution of the optimal distribution of integration time in an approximate way by employing Delta method and Lagrange multiplier method. According to the theoretical analyses and real-world experiments, it is shown that the variance of the DOLP estimator can be decreased for any value of DOLP. The method proposed in this paper can effectively decrease the measurement variance and thus statistically improve the measurement accuracy of the polarimetry system.

  16. 34 CFR 462.41 - How must tests be administered in order to accurately measure educational gain?

    Science.gov (United States)

    2010-07-01

    ... measure educational gain? 462.41 Section 462.41 Education Regulations of the Offices of the Department of... EDUCATIONAL GAIN IN THE NATIONAL REPORTING SYSTEM FOR ADULT EDUCATION What Requirements Must States and Local Eligible Providers Follow When Measuring Educational Gain? § 462.41 How must tests be administered in order...

  17. Gain measurements in CO2 CW low pressure lasers

    International Nuclear Information System (INIS)

    Rodrigues, N.A.S.; Chanes Junior, J.B.; Jayaram, K.

    1983-01-01

    A series of gain measurements in low pressure CO 2 CW laser were performed in order to study the behaviour of a CO 2 laser ampliflier as a function of pressure and discharge current. A theoretical model, based on rate equations is also presented to describe the laser behaviour and the experimental procedure adopted. (C.L.B.) [pt

  18. Measurement and prediction of voice support and room gain

    DEFF Research Database (Denmark)

    Pelegrin Garcia, David; Brunskog, Jonas; Lyberg-Åhlander, Viveka

    2012-01-01

    and good acoustical quality lies in the range between 14 and 9 dB, whereas the room gain is in the range between 0.2 and 0.5 dB. The prediction model for voice support describes the measurements in the classrooms with a coefficient of determination of 0.84 and a standard deviation of 1.2 dB....

  19. 26 CFR 31.3221-1 - Measure of employer tax.

    Science.gov (United States)

    2010-04-01

    ... 26 Internal Revenue 15 2010-04-01 2010-04-01 false Measure of employer tax. 31.3221-1 Section 31... TAXES AND COLLECTION OF INCOME TAX AT SOURCE EMPLOYMENT TAXES AND COLLECTION OF INCOME TAX AT SOURCE Railroad Retirement Tax Act (Chapter 22, Internal Revenue Code of 1954) Tax on Employers § 31.3221-1...

  20. 26 CFR 31.3111-1 - Measure of employer tax.

    Science.gov (United States)

    2010-04-01

    ... 26 Internal Revenue 15 2010-04-01 2010-04-01 false Measure of employer tax. 31.3111-1 Section 31... TAXES AND COLLECTION OF INCOME TAX AT SOURCE EMPLOYMENT TAXES AND COLLECTION OF INCOME TAX AT SOURCE Federal Insurance Contributions Act (Chapter 21, Internal Revenue Code of 1954) Tax on Employers § 31.3111...

  1. The Effects of Working at Gaining Employment Skills on the Social and Vocational Skills of Adolescents with Disabilities: A School-Based Intervention

    Science.gov (United States)

    Murray, Christopher; Doren, Bonnie

    2013-01-01

    The current investigation was designed to evaluate the effects of the Working at Gaining Employment Skills (WAGES) curriculum on the social and occupational skills of adolescents with disabilities. Adolescents with disabilities were assigned to either an intervention or control condition. Youth in the intervention group were exposed to the WAGES…

  2. Social integration and mortality in Australia.

    Science.gov (United States)

    Siahpush, M; Singh, G K

    1999-12-01

    To investigate the relationship between social integration and mortality at the aggregate level of analysis. The data were compiled from several Australian Bureau of Statistics documents. The unit of analysis was State (Territory)-year. The multivariate regression analysis included data from all States and the Australian Capital Territory for 1990-96. Five indicators of social integration--percentage of people living alone; divorce rate; unemployment rate; proportion of people who are discouraged job seekers; and unionization rate--were used as predictors of nine measures of mortality. Higher levels of social integration, as measured by all indicators except unionization, were associated with lower mortality rates. In the case of unionization, higher levels were associated with increased mortality rates. Studies concerning the relationship between social integration and health should investigate the 'type' and 'level' of social integration that is conducive to better health. To help reduce disparities in health and mortality across communities, public health researchers and policy makers need to closely monitor geographic and temporal trends in social integration measures. Social policies that emphasise investment in social integration or social capital through job creation and training, provision of gainful employment and social services for discouraged and marginalized workers, improved work conditions and social support may lower mortality directly or through their beneficial effects on health-promoting behaviours such as reduced levels of smoking, drinking and physical inactivity.

  3. Operationalisation the Romanian Employment Strategy – Target for European Union Integration

    Directory of Open Access Journals (Sweden)

    Alina Stefania Cretu

    2007-01-01

    Full Text Available In the context of the Romania's integration into the EU, as resources become more limited and constrains more acute, expectations for government services have become more demanding. Regarding labour market these changes had a significant impact on the Public Employment Services(PES. At the beginning of the new millennium the challenges facing the PES are considerable mostly because of some external problems such as: structural unemployment; social exclusion; the vulnerability of many workers because of shortage of decent work; less stability in employment and careers; an increasing demand for lifelong education and learning; public concern about the escalating costs of social security; a multiplicity of public and private labour markets actors. As it is argued in many recent studies: "there is a general agreement on the need to shift the focus of the labour market policies from the passive provision of income support to more active measures which assist reemployment." Being considered, as well, an objective for the developing countries, as Romania, a country that wants the labour market to be flexible, and also wants a fast economic growth and that is joining to an economy based on knowledge is stimulating the development of the service sector, a key factor of national competitiveness.

  4. Operationalisation the Romanian Employment Strategy – Target for European Union Integration

    Directory of Open Access Journals (Sweden)

    Alina Stefania Cretu

    2007-01-01

    Full Text Available In the context of the Romania’s integration into the EU, as resources become more limited and constrains more acute, expectations for government services have become more demanding. Regarding labour market these changes had a significant impact on the Public Employment Services(PES. At the beginning of the new millennium the challenges facing the PES are considerable mostly because of some external problems such as: structural unemployment; social exclusion; the vulnerability of many workers because of shortage of decent work; less stability in employment and careers; an increasing demand for lifelong education and learning; public concern about the escalating costs of social security; a multiplicity of public and private labour markets actors. As it is argued in many recent studies: "there is a general agreement on the need to shift the focus of the labour market policies from the passive provision of income support to more active measures which assist reemployment." Being considered, as well, an objective for the developing countries, as Romania, a country that wants the labour market to be flexible, and also wants a fast economic growth and that is joining to an economy based on knowledge is stimulating the development of the service sector, a key factor of national competitiveness.

  5. A new measurement method for electrode gain in an orthogonally symmetric beam position monitor

    International Nuclear Information System (INIS)

    Zou Junying; Wu Fangfang; Yang Yongliang; Sun Baogen; Zhou Zeran; Luo Qing; Lu Ping; Xu Hongliang

    2014-01-01

    The new beam position monitor (BPM) system of the injector at the upgrade project of the Hefei Light Source (HLS Ⅱ) has 19 stripline beam position monitors. Most consist of four orthogonally symmetric stripline electrodes. Differences in electronic gain and mismaching tolerance can cause changes in the beam response of the BPM electrodes. This variation will couple the two measured horizontal positions, resulting in measuring error. To alleviate this effect, a new technique to measure the relative response of the four electrodes has been developed. It is independent of the beam charge, and the related coefficient can be calculated theoretically. The effect of electrode coupling on this technique is analyzed. The calibration data is used to fit the gain for all 19 injector beam position monitors. The results show the standard deviation of the distribution of measured gains is about 5%. (authors)

  6. Gain measurements at 182 /angstrom/ in C VI generated by a Nd/glass laser

    International Nuclear Information System (INIS)

    Kim, D.; Skinner, C.H.; Umesh, G.; Suckewer, S.

    1988-11-01

    We present recent gain measurements in C VI at 182 A for a soft x-ray amplifier produced by a line-focused glass laser(1.053 μm) on a solid carbon target. The maximum gain measured was 8 +- 1 cm/sup /minus/1/ in the recombining plasma column with additional radiation cooling by iron impurities. 10 refs., 3 figs

  7. Personality Measurement and Employment Decisions. Questions and Answers.

    Science.gov (United States)

    Hogan, Robert; And Others

    1996-01-01

    Summarizes data concerning personality measurements as predictors of job performance, and offers responses to frequently raised questions about these measurements in the employment process. It is suggested that measures of personality are valid predictors of performance in all occupations, that they do not adversely impact minority group job…

  8. Employability Skill Development in Work-Integrated Learning: Barriers and Best Practice

    Science.gov (United States)

    Jackson, Denise

    2015-01-01

    Work-integrated learning (WIL) is widely considered instrumental in equipping new graduates with the required employability skills to function effectively in the work environment. Evaluation of WIL programs in enhancing skill development remains predominantly outcomes-focused with little attention to the process of what, how and from whom students…

  9. Product Market Integration, Comparative Advantages and Labour Market Performance

    DEFF Research Database (Denmark)

    Andersen, Torben M.; Rose Skaksen, Jan

    2004-01-01

    of the specialization gains are similar to anincrease in labour productivity, whereas the labour market reform effectis similar to an increase in the degree of competition in the labourmarket. Wages, employment and welfare increase as a result of furtherproduct market integration. It is interesting to note......In this paper, we set up a two-country general equilibrium modelwhere trade unions have wage bargaining power. We show that adecrease in trade distortions inducing further product market integrationgives rise to specialization gains as well as a labour market reformeffect. The implications...... that the labourmarket reform effect of product market integration is achieved despitean increase in the wage level.JEL Classification: F15, J30, J50.Keywords: Trade frictions, wage formation, employment, welfaregains....

  10. Employer Health and Productivity Roadmap™ strategy.

    Science.gov (United States)

    Parkinson, Michael D

    2013-12-01

    The National Institute for Occupational Safety and Health Total Worker Health™ Program defines essential elements of an integrated health protection and health promotion model to improve the health, safety, and performance of employers and employees. The lack of a clear strategy to address the core drivers of poor health, excessive medical costs, and lost productivity has deterred a comprehensive, integrated, and proactive approach to meet these challenges. The Employer Health and Productivity Roadmap™, comprising six interrelated and integrated core elements, creates a framework of shared accountability for both employers and their health and productivity partners to implement and monitor actionable measures that improve health, maximize productivity, and reduce excessive costs. The strategy is most effective when linked to a financially incentivized health management program or consumer-directed health plan insurance benefit design.

  11. Validating a Method to Assess Lipreading, Audiovisual Gain, and Integration During Speech Reception With Cochlear-Implanted and Normal-Hearing Subjects Using a Talking Head.

    Science.gov (United States)

    Schreitmüller, Stefan; Frenken, Miriam; Bentz, Lüder; Ortmann, Magdalene; Walger, Martin; Meister, Hartmut

    Watching a talker's mouth is beneficial for speech reception (SR) in many communication settings, especially in noise and when hearing is impaired. Measures for audiovisual (AV) SR can be valuable in the framework of diagnosing or treating hearing disorders. This study addresses the lack of standardized methods in many languages for assessing lipreading, AV gain, and integration. A new method is validated that supplements a German speech audiometric test with visualizations of the synthetic articulation of an avatar that was used, for it is feasible to lip-sync auditory speech in a highly standardized way. Three hypotheses were formed according to the literature on AV SR that used live or filmed talkers. It was tested whether respective effects could be reproduced with synthetic articulation: (1) cochlear implant (CI) users have a higher visual-only SR than normal-hearing (NH) individuals, and younger individuals obtain higher lipreading scores than older persons. (2) Both CI and NH gain from presenting AV over unimodal (auditory or visual) sentences in noise. (3) Both CI and NH listeners efficiently integrate complementary auditory and visual speech features. In a controlled, cross-sectional study with 14 experienced CI users (mean age 47.4) and 14 NH individuals (mean age 46.3, similar broad age distribution), lipreading, AV gain, and integration of a German matrix sentence test were assessed. Visual speech stimuli were synthesized by the articulation of the Talking Head system "MASSY" (Modular Audiovisual Speech Synthesizer), which displayed standardized articulation with respect to the visibility of German phones. In line with the hypotheses and previous literature, CI users had a higher mean visual-only SR than NH individuals (CI, 38%; NH, 12%; p < 0.001). Age was correlated with lipreading such that within each group, younger individuals obtained higher visual-only scores than older persons (rCI = -0.54; p = 0.046; rNH = -0.78; p < 0.001). Both CI and NH

  12. APS linac klystron and accelerating structure gain measurements and klystron PFN voltage regulation requirements

    International Nuclear Information System (INIS)

    Sereno, N.S.

    1997-01-01

    This note details measurements of the APS positron linac klystron and accelerating structure gain and presents an analysis of the data using fits to simple mathematical models. The models are used to investigate the sensitivity of the energy dependence of the output positron beam to klystron parameters. The gain measurements are separated into two parts: first, the energy gains of the accelerating structures of the positron linac are measured as a function of output power of the klystron; second, the klystron output power is measured as a function of input drive power and pulse forming network (PFN) voltage. This note concentrates on the positron linac rf and its performance as it directly affects the energy stability of the positron beam injected into the positron accumulator ring (PAR). Ultimately it is important to be able to minimize beam energy variations to maximize the PAR accumulation efficiency

  13. Audiovisual integration in depth: multisensory binding and gain as a function of distance.

    Science.gov (United States)

    Noel, Jean-Paul; Modi, Kahan; Wallace, Mark T; Van der Stoep, Nathan

    2018-07-01

    The integration of information across sensory modalities is dependent on the spatiotemporal characteristics of the stimuli that are paired. Despite large variation in the distance over which events occur in our environment, relatively little is known regarding how stimulus-observer distance affects multisensory integration. Prior work has suggested that exteroceptive stimuli are integrated over larger temporal intervals in near relative to far space, and that larger multisensory facilitations are evident in far relative to near space. Here, we sought to examine the interrelationship between these previously established distance-related features of multisensory processing. Participants performed an audiovisual simultaneity judgment and redundant target task in near and far space, while audiovisual stimuli were presented at a range of temporal delays (i.e., stimulus onset asynchronies). In line with the previous findings, temporal acuity was poorer in near relative to far space. Furthermore, reaction time to asynchronously presented audiovisual targets suggested a temporal window for fast detection-a range of stimuli asynchronies that was also larger in near as compared to far space. However, the range of reaction times over which multisensory response enhancement was observed was limited to a restricted range of relatively small (i.e., 150 ms) asynchronies, and did not differ significantly between near and far space. Furthermore, for synchronous presentations, these distance-related (i.e., near vs. far) modulations in temporal acuity and multisensory gain correlated negatively at an individual subject level. Thus, the findings support the conclusion that multisensory temporal binding and gain are asymmetrically modulated as a function of distance from the observer, and specifies that this relationship is specific for temporally synchronous audiovisual stimulus presentations.

  14. Safety measures for integrity test apparatus for IS process. Sulfuric acid decomposition section

    International Nuclear Information System (INIS)

    Noguchi, Hiroki; Kubo, Shinji; Iwatsuki, Jin; Onuki, Kaoru

    2013-07-01

    Hazardous substances such as sulfuric acid, sulfur dioxide and hydrogen iodide acid are employed in thermochemical Iodine-Sulfur (IS) process. It is necessary to take safety measure against workers and external environments to study experimentally on IS process. Presently we have been conducting to verify the soundness of main components made of engineering material in actual corrosive condition. An integrity test apparatus for the components of sulfuric acid decomposition was set up. We will use the hazardous substances such as sulfuric acid and sulfur dioxide and perform the experiment in pressurized condition in this integrity test. Safety measures for the test apparatus, operation and abnormal situation were considered prior to starting the test. This report summarized the consideration results for the safety measures on the integrity test apparatus for the components of sulfuric acid decomposition. (author)

  15. Employability Skills Valued by Employers as Important for Entry-Level Employees with and without Disabilities

    Science.gov (United States)

    Ju, Song; Zhang, Dalun; Pacha, Jacqueline

    2012-01-01

    Individuals with disabilities face persistent challenges in gaining meaningful employment. One of the barriers to successful employment is a lack of employability skills. The purpose of this study was to identify employability skills that employers value as being important and to examine whether employers have different expectations for…

  16. Productivity Gains from Training: The Views of Employers and Stakeholders

    Science.gov (United States)

    Menon, Maria Eliophotou

    2013-01-01

    The paper investigates the views of employers and stakeholders in Cyprus regarding the effect of training on productivity in their organisation. Qualitative research was used to collect information from 26 individuals who represented different types of employers (public sector institutions, semi-government institutions, small and large private…

  17. Employment effects of active labor market measures for sick-listed workers

    DEFF Research Database (Denmark)

    Holm, Anders; Høgelund, Jan; Gørtz, Mette

    We use unique and rich register data of 88,948 sick-listed workers to investigate the effect of active labor market measures on the duration until returning to non-subsidized employment and the duration of this employment. To identify causal treatment effects, we exploit over-time variation in 98...... job centers’ use of active labor market measures. We find that ordinary education and especially subsidized job training have statistically significant positive employment effects. Subsidized job training has a large, statistically significant positive effect on the transition into employment...... but no effect on the subsequent employment duration. In contrast, ordinary education has a statistically significant positive effect on employment duration but no effect on the transition to employment. This null effect consists of a large positive effect of having completed education and a large negative lock...

  18. Accurate determination of gain and radiation patterns by radar cross-section measurements

    DEFF Research Database (Denmark)

    Appel-Hansen, Jørgen

    1979-01-01

    Using a two-port network and geometrical interpretation of equations involved in antenna scattering, it can be derived that antenna characteristics may be determined in properly designed scattering measurements. As an alternative to this approach it is shown that measurement procedures for gain a...

  19. PROMOTION OF ACTIVE MEASURES AND EMPLOYMENT STIMULATION

    Directory of Open Access Journals (Sweden)

    LAVINIA ELISABETA POPP

    2012-01-01

    Full Text Available Researches in the field of the labour market has allowed the identification of certain specific mechanisms for employment promotion; at present, on the Romanian labour market we find passive policies, concretised in financial aids paid to the unemployed, along with active policies, constituting the most efficient social protection activity addressed to the unemployed (they aim at counterbalancing the inefficiencies determined by the granting of financial allowances, help population to find a job by actions of information, professional training and contributing to the encouragement of the labour force mobility. The paper refers to some theoretical considerations related to the influence factors of employment stimulation, as well as to the unemployment – correlated adequate measures synapse. The applied research comprises the analysis of statistic documents; the method used is the case study, i.e. the activity of employment stimulation carried on by the County Agency for Employment Caraş-Severin, in the period 2004-2012. The conclusions highlight the impact of the activity of the institutions involved in the system of social protection and security within the labour market.

  20. Phase and gain measurements in a distributed-loss cyclotron-resonance maser amplifier

    International Nuclear Information System (INIS)

    Kesar, Amit; Jerby, Eli

    2002-01-01

    The control of gain and phase delay in a cyclotron-resonance maser (CRM) amplifier is essential for a variety of applications. In this experiment, the gain and phase-delay variations are measured with respect to controlling parameters; the electron-beam current and the axial magnetic field. Following Chu et al. [Phys. Rev. Lett. 74, 1103 (1995)], the CRM amplifier comprises of a distributed-loss waveguide to enable high gain without oscillations. Our experiment yields an amplification up to 26 dB, and a phase-delay control range of 360 deg. In order to keep a fixed gain with the varying phase delay, the two controlling parameters (i.e., the solenoid field and the beam current) are operated together in a compensating mode. The experiment is conducted in a frequency of 7.3 GHz, with an electron beam of 18-kV voltage and 0.25-0.4-A current. The experimental results are compared with a theoretical model. Practical implementations of gain and phase control in CRM devices are discussed

  1. VIIRS day-night band gain and offset determination and performance

    Science.gov (United States)

    Geis, J.; Florio, C.; Moyer, D.; Rausch, K.; De Luccia, F. J.

    2012-09-01

    On October 28th, 2011, the Visible-Infrared Imaging Radiometer Suite (VIIRS) was launched on-board the Suomi National Polar-orbiting Partnership (NPP) spacecraft. The instrument has 22 spectral bands: 14 reflective solar bands (RSB), 7 thermal emissive bands (TEB), and a Day Night Band (DNB). The DNB is a panchromatic, solar reflective band that provides visible through near infrared (IR) imagery of earth scenes with radiances spanning 7 orders of magnitude. In order to function over this large dynamic range, the DNB employs a focal plane array (FPA) consisting of three gain stages: the low gain stage (LGS), the medium gain stage (MGS), and the high gain stage (HGS). The final product generated from a DNB raw data record (RDR) is a radiance sensor data record (SDR). Generation of the SDR requires accurate knowledge of the dark offsets and gain coefficients for each DNB stage. These are measured on-orbit and stored in lookup tables (LUT) that are used during ground processing. This paper will discuss the details of the offset and gain measurement, data analysis methodologies, the operational LUT update process, and results to date including a first look at trending of these parameters over the early life of the instrument.

  2. Instruments Measuring Integrated Care: A Systematic Review of Measurement Properties.

    Science.gov (United States)

    Bautista, Mary Ann C; Nurjono, Milawaty; Lim, Yee Wei; Dessers, Ezra; Vrijhoef, Hubertus Jm

    2016-12-01

    Policy Points: Investigations on systematic methodologies for measuring integrated care should coincide with the growing interest in this field of research. A systematic review of instruments provides insights into integrated care measurement, including setting the research agenda for validating available instruments and informing the decision to develop new ones. This study is the first systematic review of instruments measuring integrated care with an evidence synthesis of the measurement properties. We found 209 index instruments measuring different constructs related to integrated care; the strength of evidence on the adequacy of the majority of their measurement properties remained largely unassessed. Integrated care is an important strategy for increasing health system performance. Despite its growing significance, detailed evidence on the measurement properties of integrated care instruments remains vague and limited. Our systematic review aims to provide evidence on the state of the art in measuring integrated care. Our comprehensive systematic review framework builds on the Rainbow Model for Integrated Care (RMIC). We searched MEDLINE/PubMed for published articles on the measurement properties of instruments measuring integrated care and identified eligible articles using a standard set of selection criteria. We assessed the methodological quality of every validation study reported using the COSMIN checklist and extracted data on study and instrument characteristics. We also evaluated the measurement properties of each examined instrument per validation study and provided a best evidence synthesis on the adequacy of measurement properties of the index instruments. From the 300 eligible articles, we assessed the methodological quality of 379 validation studies from which we identified 209 index instruments measuring integrated care constructs. The majority of studies reported on instruments measuring constructs related to care integration (33%) and patient

  3. Instruments Measuring Integrated Care: A Systematic Review of Measurement Properties

    Science.gov (United States)

    BAUTISTA, MARY ANN C.; NURJONO, MILAWATY; DESSERS, EZRA; VRIJHOEF, HUBERTUS JM

    2016-01-01

    Policy Points: Investigations on systematic methodologies for measuring integrated care should coincide with the growing interest in this field of research.A systematic review of instruments provides insights into integrated care measurement, including setting the research agenda for validating available instruments and informing the decision to develop new ones.This study is the first systematic review of instruments measuring integrated care with an evidence synthesis of the measurement properties.We found 209 index instruments measuring different constructs related to integrated care; the strength of evidence on the adequacy of the majority of their measurement properties remained largely unassessed. Context Integrated care is an important strategy for increasing health system performance. Despite its growing significance, detailed evidence on the measurement properties of integrated care instruments remains vague and limited. Our systematic review aims to provide evidence on the state of the art in measuring integrated care. Methods Our comprehensive systematic review framework builds on the Rainbow Model for Integrated Care (RMIC). We searched MEDLINE/PubMed for published articles on the measurement properties of instruments measuring integrated care and identified eligible articles using a standard set of selection criteria. We assessed the methodological quality of every validation study reported using the COSMIN checklist and extracted data on study and instrument characteristics. We also evaluated the measurement properties of each examined instrument per validation study and provided a best evidence synthesis on the adequacy of measurement properties of the index instruments. Findings From the 300 eligible articles, we assessed the methodological quality of 379 validation studies from which we identified 209 index instruments measuring integrated care constructs. The majority of studies reported on instruments measuring constructs related to care

  4. Measuring learning gain: Comparing anatomy drawing screencasts and paper-based resources.

    Science.gov (United States)

    Pickering, James D

    2017-07-01

    The use of technology-enhanced learning (TEL) resources is now a common tool across a variety of healthcare programs. Despite this popular approach to curriculum delivery there remains a paucity in empirical evidence that quantifies the change in learning gain. The aim of the study was to measure the changes in learning gain observed with anatomy drawing screencasts in comparison to a traditional paper-based resource. Learning gain is a widely used term to describe the tangible changes in learning outcomes that have been achieved after a specific intervention. In regard to this study, a cohort of Year 2 medical students voluntarily participated and were randomly assigned to either a screencast or textbook group to compare changes in learning gain across resource type. Using a pre-test/post-test protocol, and a range of statistical analyses, the learning gain was calculated at three test points: immediate post-test, 1-week post-test and 4-week post-test. Results at all test points revealed a significant increase in learning gain and large effect sizes for the screencast group compared to the textbook group. Possible reasons behind the difference in learning gain are explored by comparing the instructional design of both resources. Strengths and weaknesses of the study design are also considered. This work adds to the growing area of research that supports the effective design of TEL resources which are complimentary to the cognitive theory of multimedia learning to achieve both an effective and efficient learning resource for anatomical education. Anat Sci Educ 10: 307-316. © 2016 American Association of Anatomists. © 2016 American Association of Anatomists.

  5. Soft measures and incremental gains in mines; Mesures douces et gains incrementaux : mines

    Energy Technology Data Exchange (ETDEWEB)

    Laliberte, P. [Natural Resources Canada, Ottawa, ON (Canada). CANMET Mining and Mineral Sciences Laboratories

    2008-07-01

    This paper presented a variety of measures that mine operators can adopt to save energy. Researchers at the CANMET Mining and Mineral Sciences Laboratories of Natural Resources Canada have conducted a joint study with Hydro-Quebec to investigate the impact of alternate energy technologies and control systems on energy savings. The impacts of a range of technologies were evaluated and rates of energy efficiency were compared. Technologies included hybrid vehicles; fuel cell-powered vehicles; automated ventilation control systems; heat recovery; compressed air; and electrical mining equipment. Energy profiles for various industrial applications were included. This paper also provided details of computerized simulations currently being conducted to estimate the potential incremental gains associated with the use of technology innovations in mining applications. 9 tabs., 3 figs.

  6. Problems in education, employment and social integration of hard of hearing artists

    Directory of Open Access Journals (Sweden)

    Radić-Šestić Marina

    2013-01-01

    Full Text Available The aim of this research was to determine the problems in education (primary, secondary and undergraduate academic studies, employment and social integration of hard of hearing artists based on a multiple case study. The sample consisted of 4 examinees of both genders, aged between 29 and 54, from the field of visual arts (a painter, a sculptor, a graphic designer, and an interior designer. The structured interview consisted of 30 questions testing three areas: the first area involved family, primary and secondary education; the second area was about the length of studying and socio-emotional problems of the examinees; the third area dealt with problems in employment and job satisfaction of our examinees. Research results indicate the existence of several problems which more or less reflect the success in education, employment and social integration of hard of hearing artists. One of the problems which can influence the development of language abilities, socioemotional maturity, and better educational achievement of hard of hearing artists in general, is prolongation in diagnosing hearing impairments, amplification and auditory rehabilitation. Furthermore, parents of hard of hearing artists have difficulties in adjusting to their children's hearing impairments and ignore the language and culture of the Deaf, i.e. they tend to identify their children with typically developing population. Another problem are negative attitudes of teachers/professors/employers and typically developing peers/ colleagues towards the inclusion of hard of hearing people into the regular education/employment system. Apart from that, unmodified instruction, course books, information, school and working area further complicate the acquisition of knowledge, information, and the progress of hard of hearing people in education and profession.

  7. Gesundes Kinzigtal Integrated Care: improving population health by a shared health gain approach and a shared savings contract

    Directory of Open Access Journals (Sweden)

    H. Hildebrandt

    2010-06-01

    Full Text Available Introduction: Integrated care solutions need supportive financial incentives. In this paper we describe the financial architecture and operative details of the integrated pilot Gesundes Kinzigtal.Description of integrated care case: Located in Southwest Germany, Gesundes Kinzigtal is one of the few population-based integrated care approaches in Germany, organising care across all health service sectors and indications. The system serving around half of the population of the region is run by a regional health management company (Gesundes Kinzigtal GmbH in coope­ration with the physicians' network in the region (MQNK, a German health care management company with a background in medical sociology and health economics (OptiMedis AG and with two statutory health insurers (among them is the biggest health insurer in Southwest Germany: AOK Baden-Württemberg.Discussion and (preliminary conclusion: The shared savings contract between Gesundes Kinzigtal GmbH and the two health insurers, providing financial incentives for managers and health care providers to realize a sub­stantial efficiency gain, could be an appropriate contractual base of Gesundes Kinzigtal's population health gain approach. This approach is based on the assumption that a more effective trans-sector organisation of Germany's health care system and increased investments in well-designed preventive programmes will lead to a reduction in  morbidity, and in particular to a reduced incidence and prevalence of chronic diseases. This, in turn, is to lead to a comparative reduction in health care cost. Although the comparative cost in the Kinzigtal region has been reduced from the onset of Gesundes Kinzigtal Integrated Care, only future research will have to demonstrate whether - and to what extent - cost reduction may be attributed to a real population health gain.

  8. Gesundes Kinzigtal Integrated Care: improving population health by a shared health gain approach and a shared savings contract

    Directory of Open Access Journals (Sweden)

    H. Hildebrandt

    2010-06-01

    Full Text Available Introduction: Integrated care solutions need supportive financial incentives. In this paper we describe the financial architecture and operative details of the integrated pilot 'Gesundes Kinzigtal'. Description of integrated care case: Located in Southwest Germany, 'Gesundes Kinzigtal' is one of the few population-based integrated care approaches in Germany, organising care across all health service sectors and indications. The system serving around half of the population of the region is run by a regional health management company (Gesundes Kinzigtal GmbH in coope­ration with the physicians' network in the region (MQNK, a German health care management company with a background in medical sociology and health economics (OptiMedis AG and with two statutory health insurers (among them is the biggest health insurer in Southwest Germany: AOK Baden-Württemberg. Discussion and (preliminary conclusion: The shared savings contract between Gesundes Kinzigtal GmbH and the two health insurers, providing financial incentives for managers and health care providers to realize a sub­stantial efficiency gain, could be an appropriate contractual base of Gesundes Kinzigtal's population health gain approach. This approach is based on the assumption that a more effective trans-sector organisation of Germany's health care system and increased investments in well-designed preventive programmes will lead to a reduction in  morbidity, and in particular to a reduced incidence and prevalence of chronic diseases. This, in turn, is to lead to a comparative reduction in health care cost. Although the comparative cost in the Kinzigtal region has been reduced from the onset of Gesundes Kinzigtal Integrated Care, only future research will have to demonstrate whether - and to what extent - cost reduction may be attributed to a real population health gain.

  9. High speed gain coupled DFB laser diode integrated with MQW electroabsorption modulator

    International Nuclear Information System (INIS)

    Kim, Myung Gyoo; Lee, Seung Won; Park, Seong Su; Oh, Dae Kon; Lee, Hee Tae; Kim, Hong man; Pyun, Kwang Eui

    1998-01-01

    We have demonstrated stable modulation characteristics of the gain coupled distributed feedback(GC-DFB) laser diode integrated with butt-coupled InGaAsP/InGaAsP strain compensated MQW(multiple-Quantum-well) modulator for high speed optical transmission. For this purpose, we have adopted the InGaAsP/InGaAsP strain compensated MQW structure for the EA modulator and n-doped InGaAs absorptive grating for DFB laser. The typical threshold current and slope efficiency were about 15 mA and 0.1 mW/mA, respectively. The extinction ratio of fabricated integrated device was about 15 dB at -2 V, and the small signal bandwidth was shown to be around 17GHz. We also found that the α parameter becomes negative at below a -0.6 V bias voltage. We transmitted 10 Gbps NRZ electrical signal over 90 km of standard single mode optical fiber (SMF). A clearly opened eye diagram was observed in the modulated output

  10. High speed gain coupled DFB laser diode integrated with MQW electroabsorption modulator

    CERN Document Server

    Kim, M G; Park, S S; Oh, D K; Lee, H T; Kim, H M; Pyun, K E

    1998-01-01

    We have demonstrated stable modulation characteristics of the gain coupled distributed feedback(GC-DFB) laser diode integrated with butt-coupled InGaAsP/InGaAsP strain compensated MQW(multiple-Quantum-well) modulator for high speed optical transmission. For this purpose, we have adopted the InGaAsP/InGaAsP strain compensated MQW structure for the EA modulator and n-doped InGaAs absorptive grating for DFB laser. The typical threshold current and slope efficiency were about 15 mA and 0.1 mW/mA, respectively. The extinction ratio of fabricated integrated device was about 15 dB at -2 V, and the small signal bandwidth was shown to be around 17GHz. We also found that the alpha parameter becomes negative at below a -0.6 V bias voltage. We transmitted 10 Gbps NRZ electrical signal over 90 km of standard single mode optical fiber (SMF). A clearly opened eye diagram was observed in the modulated output.

  11. Gain measurement in a CW medium-power diode pumped Nd:YAG laser amplifier by ASE analysis

    International Nuclear Information System (INIS)

    Razzaghi, D; Hajiesmaeilbaigi, F; Ruzbehani, M

    2014-01-01

    Using the relation between amplified spontaneous emission intensity and gain, a set of formulas is derived for gain evaluation by comparing fluorescence yield in two different lengths of the active medium. Experimental measurements are carried out and gain is calculated by solving the derived formula. For comparison, measurements are also carried out using the probe beam method, which shows good agreement between the two methods in a typical CW medium-power diode pumped Nd:YAG amplifier. (paper)

  12. Measuring integrated care.

    Science.gov (United States)

    Strandberg-Larsen, Martin

    2011-02-01

    The positive outcomes of coordination of healthcare services are to an increasing extent becoming clear. However the complexity of the field is an inhibiting factor for vigorously designed trial studies. Conceptual clarity and a consistent theoretical frame-work are thus needed. While researchers respond to these needs, patients and providers face the multiple challenges of today's healthcare environment. Decision makers, planners and managers need evidence based policy options and information on the scope of the integrated care challenges they are facing. The US managed care organization Kaiser Permanente has been put forward as an example for European healthcare systems to follow, although the evidence base is far from conclusive. The thesis has five objectives: 1) To contribute to the understanding of the concept of integration in healthcare systems and to identify measurement methods to capture the multi-dimensional aspects of integrated healthcare delivery. 2) To assess the level of integration of the Danish healthcare system. 3) To assess the use of joint health plans as a tool for coordination between the regional and local level in the Danish healthcare system. 4) To compare the inputs and performance of the Danish healthcare system and the managed care organization Kaiser Permanente, California, US. 5) To compare primary care clinicians' perception of clinical integration in two healthcare systems: Kaiser Permanente, Northern California and the Danish healthcare system. Further to examine the associations between specific organizational factors and clinical integration within each system. The literature was systematically searched to identify methods for measurement of integrated healthcare delivery. A national cross-sectional survey was conducted among major professional stake-holders at five different levels of the Danish healthcare system. The survey data were used to allow for analysis of the level of integration achieved. Data from the survey were

  13. Quantum measure and integration theory

    International Nuclear Information System (INIS)

    Gudder, Stan

    2009-01-01

    This article begins with a review of quantum measure spaces. Quantum forms and indefinite inner-product spaces are then discussed. The main part of the paper introduces a quantum integral and derives some of its properties. The quantum integral's form for simple functions is characterized and it is shown that the quantum integral generalizes the Lebesgue integral. A bounded, monotone convergence theorem for quantum integrals is obtained and it is shown that a Radon-Nikodym-type theorem does not hold for quantum measures. As an example, a quantum-Lebesgue integral on the real line is considered.

  14. Uncertainty of angular displacement measurement with a MEMS gyroscope integrated in a smartphone

    International Nuclear Information System (INIS)

    De Campos Porath, Maurício; Dolci, Ricardo

    2015-01-01

    Low-cost inertial sensors have recently gained popularity and are now widely used in electronic devices such as smartphones and tablets. In this paper we present the results of a set of experiments aiming to assess the angular displacement measurement errors of a gyroscope integrated in a smartphone of a recent model. The goal is to verify whether these sensors could substitute dedicated electronic inclinometers for the measurement of angular displacement. We estimated a maximum error of 0.3° (sum of expanded uncertainty and maximum absolute bias) for the roll and pitch axes, for a measurement time without referencing up to 1 h. (paper)

  15. Measuring the degree of integration for an integrated service network

    Directory of Open Access Journals (Sweden)

    Chenglin Ye

    2012-09-01

    Full Text Available Background: Integration involves the coordination of services provided by autonomous agencies and improves the organization and delivery of multiple services for target patients. Current measures generally do not distinguish between agencies' perception and expectation. We propose a method for quantifying the agencies' service integration. Using the data from the Children's Treatment Network (CTN, we aimed to measure the degree of integration for the CTN agencies in York and Simcoe.  Theory and Methods: We quantified the integration by the agreement between perceived and expected levels of involvement and calculated four scores from different perspectives for each agency. We used the average score to measure the global network integration and examined the sensitivity of the global score.  Results: Most agencies' integration scores were less than 65%. As measured by the agreement between every other agency's perception and expectation, the overall integration of CTN in Simcoe and York was 44% (95% CI: 39% - 49% and 52% (95% CI: 48% - 56%, respectively. The sensitivity analysis showed that the global scores were robust.  Conclusion: Our method extends existing measures of integration and possesses a good extent of validity. We can also apply the method in monitoring improvement and linking integration with other outcomes.

  16. Measuring the degree of integration for an integrated service network

    Directory of Open Access Journals (Sweden)

    Chenglin Ye

    2012-09-01

    Full Text Available Background: Integration involves the coordination of services provided by autonomous agencies and improves the organization and delivery of multiple services for target patients. Current measures generally do not distinguish between agencies' perception and expectation. We propose a method for quantifying the agencies' service integration. Using the data from the Children's Treatment Network (CTN, we aimed to measure the degree of integration for the CTN agencies in York and Simcoe. Theory and Methods: We quantified the integration by the agreement between perceived and expected levels of involvement and calculated four scores from different perspectives for each agency. We used the average score to measure the global network integration and examined the sensitivity of the global score. Results: Most agencies' integration scores were less than 65%. As measured by the agreement between every other agency's perception and expectation, the overall integration of CTN in Simcoe and York was 44% (95% CI: 39% - 49% and 52% (95% CI: 48% - 56%, respectively. The sensitivity analysis showed that the global scores were robust. Conclusion: Our method extends existing measures of integration and possesses a good extent of validity. We can also apply the method in monitoring improvement and linking integration with other outcomes. 

  17. Non-additive measure and integral

    CERN Document Server

    Denneberg, Dieter

    1994-01-01

    Non-Additive Measure and Integral is the first systematic approach to the subject. Much of the additive theory (convergence theorems, Lebesgue spaces, representation theorems) is generalized, at least for submodular measures which are characterized by having a subadditive integral. The theory is of interest for applications to economic decision theory (decisions under risk and uncertainty), to statistics (including belief functions, fuzzy measures) to cooperative game theory, artificial intelligence, insurance, etc. Non-Additive Measure and Integral collects the results of scattered and often isolated approaches to non-additive measures and their integrals which originate in pure mathematics, potential theory, statistics, game theory, economic decision theory and other fields of application. It unifies, simplifies and generalizes known results and supplements the theory with new results, thus providing a sound basis for applications and further research in this growing field of increasing interest. It also co...

  18. Measuring Permanent Responses to Capital-Gains Tax Changes in Panel Data.

    OpenAIRE

    Burman, Leonard E; Randolph, William C

    1994-01-01

    The authors use panel data and information about differences in state tax rates to separate the effects of transitory and permanent tax rate changes on capital-gains realizations behavior. The estimated effect of permanent change is substantially smaller than the effect of transitory change. The difference is even larger than differences between estimates from past micro data studies, which have primarily measured the transitory effect, and time-series studies, which have primarily measured t...

  19. 20 CFR 404.1084 - Gain or loss from disposition of property; capital assets; timber, coal, and iron ore...

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Gain or loss from disposition of property...- ) Employment, Wages, Self-Employment, and Self-Employment Income Self-Employment Income § 404.1084 Gain or loss...-employment, exclude any gain or loss— (1) That is considered a gain or loss from the sale or exchange of a...

  20. Search for MH370: New Geologic Insights Gained from Integrating Multiple Geophysical Datasets

    Science.gov (United States)

    McBee, J.; Gharib, J. J.; Ingle, S.

    2017-12-01

    During the search for the missing flight MH370, Fugro acquired the largest extent of high resolution bathymetry in the southern Indian Ocean to date. These recently released multibeam echosounder (MBES) backscatter, bathymetry, water column, and sub-bottom profiler data reveal additional insights into the characteristics of the Indian Ocean seafloor and the geologic and oceanographic processes that shaped it. The mapping is at a sufficient resolution to examine relict spreading texture such as fracture zones, pseudofaults, failed propogating rifts, devals (deviations from axial linearity), etc. In this presentation, we will highlight several prominent regional seafloor features, and illustrate insights gained by integrating MBES backscatter and water column data with bathymetric analyses. Backscatter data to the north of the southern flank of Broken Ridge illustrate the complexity to which sediment has been reworked downslope where intricate patterns of low backscatter intensities are observed. Here, exposed rocks form prominent high backscatter reflectors amid the surrounding low backscatter sediments. The lateral extent of high backscatter intensity reflectors south of the Diamantina reveals the expansiveness of exposed igneous rocks that resulted from seafloor spreading. Volcanic features, including off-axis volcanoes and leaky transforms are also interpreted as high backscatter anomalies in the tectonic speading fabric to the north of the Geelvinck fracture zone, towards the southern extent of the dataset. These and other examples show that by integrating the entire suite of data collected by MBES systems, more detailed interpretations of the geologic processes that shaped the seafloor may be gained than by examination of bathymetry alone.

  1. The measurement of employment benefits

    Energy Technology Data Exchange (ETDEWEB)

    Burtraw, D

    1994-07-01

    The consideration of employment effects and so-called 'hidden employment benefits' is one of the most confused and contentious issues in benefit-cost analysis and applied welfare economics generally. New investments create new employment opportunities, and often advocates for specific investments cite these employment opportunities as alleged benefits associated with the project. Indeed, from the local perspective, such employment opportunities may appear to be beneficial because they appear to come for free. If there is unemployment in the local area, then new investments create valuable employment opportunities for those in the local community. Even if there is full employment in the local area then new investments create incentives for immigrant from other locations that may have pecuniary benefits locally through increased property values, business revenues, etc. The focus in this study is on net economic benefits from a broad national perspective. From this perspective, many of the alleged employment benefits at the local level are offset by lost benefits at other locales, and do not count as benefits according to economic theory. This paper outlines a methodology for testing this rebuttable presumption with empirical data pertaining to labor markets that would be affected by a specific new investment. The theoretical question that is relevant is whether the social opportunity cost of new employment is less than the market wage. This would be the case, for example, if one expects unemployment or underemployment to persist in a specific region of the economy or occupational category affected by the new investment. In this case, new employment opportunities produce a net increase in social wealth rather than just a transfer of income.

  2. The measurement of employment benefits

    International Nuclear Information System (INIS)

    Burtraw, D.

    1994-01-01

    The consideration of employment effects and so-called 'hidden employment benefits' is one of the most confused and contentious issues in benefit-cost analysis and applied welfare economics generally. New investments create new employment opportunities, and often advocates for specific investments cite these employment opportunities as alleged benefits associated with the project. Indeed, from the local perspective, such employment opportunities may appear to be beneficial because they appear to come for free. If there is unemployment in the local area, then new investments create valuable employment opportunities for those in the local community. Even if there is full employment in the local area then new investments create incentives for immigrant from other locations that may have pecuniary benefits locally through increased property values, business revenues, etc. The focus in this study is on net economic benefits from a broad national perspective. From this perspective, many of the alleged employment benefits at the local level are offset by lost benefits at other locales, and do not count as benefits according to economic theory. This paper outlines a methodology for testing this rebuttable presumption with empirical data pertaining to labor markets that would be affected by a specific new investment. The theoretical question that is relevant is whether the social opportunity cost of new employment is less than the market wage. This would be the case, for example, if one expects unemployment or underemployment to persist in a specific region of the economy or occupational category affected by the new investment. In this case, new employment opportunities produce a net increase in social wealth rather than just a transfer of income

  3. Integration of Absolute Orientation Measurements in the KinectFusion Reconstruction pipeline

    KAUST Repository

    Giancola, Silvio

    2018-02-12

    In this paper, we show how absolute orientation measurements provided by low-cost but high-fidelity IMU sensors can be integrated into the KinectFusion pipeline. We show that integration improves both runtime, robustness and quality of the 3D reconstruction. In particular, we use this orientation data to seed and regularize the ICP registration technique. We also present a technique to filter the pairs of 3D matched points based on the distribution of their distances. This filter is implemented efficiently on the GPU. Estimating the distribution of the distances helps control the number of iterations necessary for the convergence of the ICP algorithm. Finally, we show experimental results that highlight improvements in robustness, a speed-up of almost 12%, and a gain in tracking quality of 53% for the ATE metric on the Freiburg benchmark.

  4. Integration of Absolute Orientation Measurements in the KinectFusion Reconstruction pipeline

    KAUST Repository

    Giancola, Silvio; Schneider, Jens; Wonka, Peter; Ghanem, Bernard

    2018-01-01

    In this paper, we show how absolute orientation measurements provided by low-cost but high-fidelity IMU sensors can be integrated into the KinectFusion pipeline. We show that integration improves both runtime, robustness and quality of the 3D reconstruction. In particular, we use this orientation data to seed and regularize the ICP registration technique. We also present a technique to filter the pairs of 3D matched points based on the distribution of their distances. This filter is implemented efficiently on the GPU. Estimating the distribution of the distances helps control the number of iterations necessary for the convergence of the ICP algorithm. Finally, we show experimental results that highlight improvements in robustness, a speed-up of almost 12%, and a gain in tracking quality of 53% for the ATE metric on the Freiburg benchmark.

  5. Measurement of small-signal gain on COIL with chemically generated molecular iodine

    Czech Academy of Sciences Publication Activity Database

    Jirásek, Vít; Špalek, Otomar; Čenský, Miroslav; Kodymová, Jarmila

    2010-01-01

    Roč. 46, č. 9 (2010), s. 1350-1353 ISSN 0018-9197 Institutional research plan: CEZ:AV0Z10100523 Keywords : chemical lasers * iodine * gain measurement Subject RIV: BH - Optics, Masers, Lasers Impact factor: 2.477, year: 2010

  6. Measurement bias dependence of enhanced bipolar gain degradation at low dose rates

    International Nuclear Information System (INIS)

    Witczak, S.C.; Lacoe, R.C.; Mayer, D.C.; Fleetwood, D.M.

    1998-03-01

    Oxide trapped charge, field effects from emitter metallization, and high level injection phenomena moderate enhanced gain degradation of lateral pnp transistors at low dose rates. Hardness assurance tests at elevated irradiation temperatures require larger design margins for low power measurement biases

  7. Employability Skills Assessment: Measuring Work Ethic for Research and Learning

    Science.gov (United States)

    Park, HwaChoon; Hill, Roger B.

    2016-01-01

    The Employability Skills Assessment (ESA) was developed by Hill (1995) to provide an alternative measure of work ethic needed for success in employment. This study tested goodness-of-fit for a model used to interpret ESA results. The model had three factors: interpersonal skills, initiative, and dependability. Confirmatory factor analysis results…

  8. A Differential Monolithically Integrated Inductive Linear Displacement Measurement Microsystem

    Directory of Open Access Journals (Sweden)

    Matija Podhraški

    2016-03-01

    Full Text Available An inductive linear displacement measurement microsystem realized as a monolithic Application-Specific Integrated Circuit (ASIC is presented. The system comprises integrated microtransformers as sensing elements, and analog front-end electronics for signal processing and demodulation, both jointly fabricated in a conventional commercially available four-metal 350-nm CMOS process. The key novelty of the presented system is its full integration, straightforward fabrication, and ease of application, requiring no external light or magnetic field source. Such systems therefore have the possibility of substituting certain conventional position encoder types. The microtransformers are excited by an AC signal in MHz range. The displacement information is modulated into the AC signal by a metal grating scale placed over the microsystem, employing a differential measurement principle. Homodyne mixing is used for the demodulation of the scale displacement information, returned by the ASIC as a DC signal in two quadrature channels allowing the determination of linear position of the target scale. The microsystem design, simulations, and characterization are presented. Various system operating conditions such as frequency, phase, target scale material and distance have been experimentally evaluated. The best results have been achieved at 4 MHz, demonstrating a linear resolution of 20 µm with steel and copper scale, having respective sensitivities of 0.71 V/mm and 0.99 V/mm.

  9. Does objectively measured physical activity modify the association between early weight gain and fat mass in young adulthood?

    Science.gov (United States)

    Kolle, Elin; Horta, Bernardo L; Wells, Jonathan; Brage, Soren; Barros, Fernando C; Ekelund, Ulf; Hallal, Pedro C

    2017-11-25

    Substantial evidence suggests that weight gain in early life is associated with increased adiposity and other metabolic disorders later in life. It is, however, unknown whether physical activity (PA) may modify these associations. We aimed to examine whether objectively measured PA at 30 years modified the associations between conditional weight gain in infancy (0-2 y) and childhood (2-4 y) with fat mass index (FMI) and visceral abdominal fat measured at age 30 years. Prospective birth cohort study in Pelotas, Brazil, including 1874 participants with weight data at birth, two and four years of age, and measures of FMI, visceral abdominal fat and PA at a mean age of 30.2 years. At age 30, time spent (min/day) in moderate-to-vigorous physical activity (MVPA) was measured objectively using a wrist-worn accelerometer worn for four to seven consecutive days.. Multiple linear regression analyses was performed to assess the associations between conditional weight gain and outcome variables at 30 years, adjusting for covariates. We examined whether PA modified the association between conditional weight gain and the outcomes of interest by introducing an interaction term (conditional weight gain × PA) in the models. Conditional weight gain in infancy and childhood were both positively associated with later FMI (infancy weight gain: β = 0.68, 95% CI: 0.48, 0.88; P gain: β = 0.91, 95% CI: 0.70, 1.11; P gain and later FMI (β = -0.006, 95% CI: -0.011, -0.001; P = 0.029), suggesting stronger associations between weight gain and FMI in those with lower levels of MVPA. Conditional weight gain in childhood was also positively associated with visceral abdominal fat (β = 0.24, 95% CI: 0.15, 0424, P gain between 2 and 4 years of age is associated with increased FMI at age 30 years. However, higher levels of MVPA appear to attenuate this detrimental association.

  10. Measuring integrated care

    DEFF Research Database (Denmark)

    Strandberg-Larsen, Martin

    2011-01-01

    respond to these needs, patients and providers face the multiple challenges of today's healthcare environment. Decision makers, planners and managers need evidence based policy options and information on the scope of the integrated care challenges they are facing. The US managed care organization Kaiser...... differences were found in the perception of clinical integration in the two settings. More primary care clinicians in the Northern California region of Kaiser Permanente reported being part of a clinical integrated environment than did Danish general practitioners. By measuring the level of clinical...... and performance of the Danish healthcare system and the managed care organization Kaiser Permanente, California, US. 5) To compare primary care clinicians' perception of clinical integration in two healthcare systems: Kaiser Permanente, Northern California and the Danish healthcare system. Further to examine...

  11. Associations of neighbourhood walkability indices with weight gain.

    Science.gov (United States)

    Koohsari, Mohammad Javad; Oka, Koichiro; Shibata, Ai; Liao, Yung; Hanibuchi, Tomoya; Owen, Neville; Sugiyama, Takemi

    2018-04-03

    Inconsistent associations of neighbourhood walkability with adults' body weight have been reported. Most studies examining the relationships of walkability and adiposity are cross-sectional in design. We examined the longitudinal relationships of two walkability indices - conventional walkability and space syntax walkability, and their individual components, with weight change among adults over four years. Data were from the Physical Activity in Localities and Community study in Adelaide, Australia. In 2003-2004, 2650 adults living in 154 Census Collection Districts (CCDs) returned baseline questionnaires; in 2007-2008, the follow-up survey was completed by 1098. Participants reported their weight at baseline and at follow-up. Neighbourhood walkability indices were calculated using geographic information systems and space syntax software. Linear marginal models using generalized estimating equations with robust standard errors were fitted to examine associations of the two walkability indices and their individual components with the weight at follow-up, adjusting for baseline weight, socio-demographic variables, and spatial clustering at the level of CCD. The overall mean weight gain over four years was 1.5 kg. The two walkability indices were closely correlated (r = 0.76, p walkability indices and weight change. Among walkability components, there was a marginally significant negative association between space syntax measure of street integration and weight change: one standard deviation increment in street integration was associated with 0.31 kg less weight gain (p = 0.09). Using a prospective study design and a novel space-syntax based measure of walkability, we were not able to identify relationships between neighbourhood walkability with weight gain. This is consistent with other inconclusive findings on the built environment and obesity. Research on the built environment and adults' weight gain may need to consider not just local environments but

  12. Ferromagnetic linewidth measurements employing electrodynamic model of the magnetic plasmon resonance

    Science.gov (United States)

    Krupka, Jerzy; Aleshkevych, Pavlo; Salski, Bartlomiej; Kopyt, Pawel

    2018-02-01

    The mode of uniform precession, or Kittel mode, in a magnetized ferromagnetic sphere, has recently been proven to be the magnetic plasmon resonance. In this paper we show how to apply the electrodynamic model of the magnetic plasmon resonance for accurate measurements of the ferromagnetic resonance linewidth ΔH. Two measurement methods are presented. The first one employs Q-factor measurements of the magnetic plasmon resonance coupled to the resonance of an empty metallic cavity. Such coupled modes are known as magnon-polariton modes, i.e. hybridized modes between the collective spin excitation and the cavity excitation. The second one employs direct Q-factor measurements of the magnetic plasmon resonance in a filter setup with two orthogonal semi-loops used for coupling. Q-factor measurements are performed employing a vector network analyser. The methods presented in this paper allow one to extend the measurement range of the ferromagnetic resonance linewidth ΔH well beyond the limits of the commonly used measurement standards in terms of the size of the samples and the lowest measurable linewidths. Samples that can be measured with the newly proposed methods may have larger size as compared to the size of samples that were used in the standard methods restricted by the limits of perturbation theory.

  13. Systematic measurements of the gain and the energy resolution of single and double mask GEM detectors

    International Nuclear Information System (INIS)

    Biswas, S.; Schmidt, D.J.; Abuhoza, A.; Frankenfeld, U.; Garabatos, C.; Hehner, J.; Kleipa, V.; Morhardt, T.; Schmidt, C.J.; Schmidt, H.R.; Wiechula, J.

    2016-01-01

    Systematic studies on the gain and the energy resolution have been carried out by varying the voltage across the GEM foils for both single mask and double mask triple GEM detector prototypes. Variation of the gain and the energy resolution has also been measured by varying either the drift voltage, transfer voltage and induction voltage keeping other voltages constant. The results of the systematic measurements have been presented.

  14. Increasing Employability by Implementing a Work-Integrated Learning Partnership Model in South Africa--A Student Perspective

    Science.gov (United States)

    Taylor, Susanne; Govender, Cookie M.

    2017-01-01

    In South Africa, 70 per cent of the population is under 35 years old. South Africa has a vision to increase youth employment by focusing on education, training and skills development that will promote employment opportunities. A work-integrated learning (WIL) partnership model was developed to provide students with work experience and to increase…

  15. Automatic Voltage Control System with Market Price Employing Large Wind Farms

    DEFF Research Database (Denmark)

    Qin, Nan; Bak, Claus Leth; Abildgaard, Hans

    2018-01-01

    of the voltage control service provided by the power plant owners. The benefit of employing the large offshore wind farms in this AVC system is investigated. The simulation based on the measurement data from the Danish electricity control center demonstrates the superiority of the proposed approach in terms...... of the cost minimization. The gained profit by employing the wind farms can be an argument to purchase the voltage control service provided by these wind farms....

  16. Gas Gain Measurement Of GEM-Foil In Argon-Carbon Dioxide Mixture

    International Nuclear Information System (INIS)

    Nguyen Ngoc Duy; Vuong Huu Tan; Le Hong Khiem

    2011-01-01

    Nuclear reaction measurement with radioactive beam at low energy plays an important role in nuclear astrophysics and nuclear structure. The trajectory of particle beams can be obtained by using an active gas target, multiple-sampling and tracking proportional chamber (MSTPC), as a proportional counter. Because of intensity of low energy radioactive beam, in the stellar reaction such as (α, p), (p, α), it is necessary to increase the gain for the counter. In this case, a gas electrons multiplier (GEM) foil will be used, so the proportional counter is called GEM-MSTPC. The efficient gas gain of GEM foils which relates to foil thickness and operating pressure was investigated with two type of the foils, 400 μm and 200 μm, in Argon (70%) + Carbon dioxide (30%) mixture. (author)

  17. Soft x-ray laser gain measurements in a recombining plasma column

    International Nuclear Information System (INIS)

    Suckewer, S.; Skinner, C.H.; Milchberg, H.; Keane, C.; Voorhees, D.

    1985-03-01

    An enhancement of approx. 100 of stimulated emission over spontaneous emission of the CVI 182 A line (one-pass gain approx. = 6.5) was measured in a recombining, magnetically confined plasma column by two independent techniques using intensity calibrated XUV monochromators. Additional confirmation that the enhancement was due to stimulated emission has been obtained with a soft x-ray mirror

  18. Measurement of Employability Skills on Teaching Factory Learning

    Science.gov (United States)

    Subekti, S.; Ana, A.

    2018-02-01

    Vocational High Schools as one of the educational institutions that has the responsibility in preparing skilled labors has a challenge to improve the quality of human resources as a candidate for skilled labors, to compete and survive in a changing climate of work. BPS noted an increase in the number of non-worker population (BAK) in 2015-2017 on vocational graduates as many as 564,272 people. The ability to adapt and maintain jobs in a variety of conditions is called employability skills. This study purpose to measure the development of employability skills of communication skills, problem-solving skills and teamwork skills on the implementation of teaching factory learning in SMK Negeri 1 Cibadak, THPH Skills Program on bakery competency. This research uses mixed method, with concurrent triangulation mix methods research design. Data collection techniques used interviews and questionnaires. The result shows that there are increasing students’ employability skills in communication skills, problem solving skills, and teamwork skills in teaching factory learning. Principles of learning that apply learning by doing student centering and learning arrangements such as situations and conditions in the workplace have an impact on improving student employability skills.

  19. Unstable work histories and fertility in France: An adaptation of sequence complexity measures to employment trajectories

    Directory of Open Access Journals (Sweden)

    Daniel Ciganda

    2015-04-01

    Full Text Available Background: The emergence of new evidence suggesting a sign shift in the long-standing negativecorrelation between prosperity and fertility levels has sparked a renewed interest in understanding the relationship between economic conditions and fertility decisions. In thiscontext, the notion of uncertainty has gained relevance in analyses of low fertility. So far, most studies have approached this notion using snapshot indicators such as type of contract or employment situation. However, these types of measures seem to be fallingshort in capturing what is intrinsically a dynamic process. Objective: Our first objective is to analyze to what extent employment trajectories have become lessstable over time, and the second, to determine whether or not employment instability has an impact on the timing and quantum of fertility in France.Additionally, we present a new indicator of employment instability that takes into account both the frequency and duration of unemployment, with the objective of comparing its performance against other, more commonly used indicators of economic uncertainty. Methods: Our study combines exploratory (Sequence Analysis with confirmatory (Event History, Logistic Regression methods to understand the relationship between early life-course uncertainty and the timing and intensity of fertility. We use employment histories from the three available waves of the Etude des relations familiales et intergenerationnelles (ERFI, a panel survey carried out by INED and INSEE which constitutes the base of the Generations and Gender Survey (GGS in France. Results: Although France is characterized by strong family policies and high and stable fertility levels, we find that employment instability not only has a strong and persistent negative effect on the final number of children for both men and women, but also contributes to fertility postponement in the case of men.Regarding the timing of the transition to motherhood, we show how

  20. Fuzzy measures and integrals

    Czech Academy of Sciences Publication Activity Database

    Mesiar, Radko

    2005-01-01

    Roč. 28, č. 156 (2005), s. 365-370 ISSN 0165-0114 R&D Projects: GA ČR(CZ) GA402/04/1026 Institutional research plan: CEZ:AV0Z10750506 Keywords : fuzzy measures * fuzzy integral * regular fuzzy integral Subject RIV: BA - General Mathematics Impact factor: 1.039, year: 2005

  1. Engaging Employers in Workplace Training - Lessons from the English Train to Gain Programme

    Science.gov (United States)

    Mazenod, Anna

    2014-01-01

    Despite the ambition of an employer-led vocational education and training system, a lack of employer engagement in workplace training continues to be reported in England. There seems to be a mismatch between national policy level expectations of how employers should be engaging in workplace training and the practicalities of employer engagement at…

  2. THE EFFECTS OF FIXED-TERM EMPLOYMENT SPELLS ON THE INTEGRATION OF SCHOOL-LEAVERS ON THE LABOUR MARKET: EVIDENCE FROM FRANCE

    Directory of Open Access Journals (Sweden)

    Oana Calavrezo

    2007-12-01

    Full Text Available In this paper, we investigate the impact of fixed term employment spells (fixed-term contracts and temporary work on the integration on the labour market (translated by the transition to a permanent contract for French school-leavers. We study, at the same time, the impact of three categories of determinants on the schoolleavers' integration on the labour market: individual's features, a first fixed-term employment spell and a later fixed-term employment episode. More precisely, by taking into account the fixed-term employment spell duration, we identify four possible trajectories and we examine if fixed term employment is a "stepping-stone" to permanent employment. In order to control for possible endogeneity biases, trivariate probit models are implemented on a sample of 11 303 individuals obtained from the French "Generation 98" survey.

  3. Information Literacy and Employability

    OpenAIRE

    O'Keeffe, Colin

    2016-01-01

    Information Literacy (IL) and its relationship to third level graduates’ employability has gained more attention in recent years. This article examines how IL has evolved from skills initially associated with academic libraries into a key workplace skill set of the knowledge economy. It outlines the challenges interviewees encounter when selling IL to employers, how IL can be utilised when preparing for upcoming interviews and suggests a distinction between workplace IL and employability IL. ...

  4. Gain Enhanced LTCC System-on-Package for UMRR Applications

    KAUST Repository

    Shamim, Atif; Ghaffar, Farhan Abdul; Khalid, Muhammad Umair; Salama, Khaled N.

    2014-01-01

    An apparatus, system, and method for Gain Enhanced LTCC System-on-Package radar sensor. The sensor includes a substrate and an integrated circuit coupled to the substrate, where the integrated circuit is configured to transmit and receive radio frequency (RF) signals. An antenna may be coupled to the integrated circuit and a lens may be coupled to the antenna. The lens may be configured to enhance the gain of the sensor.

  5. Gain Enhanced LTCC System-on-Package for UMRR Applications

    KAUST Repository

    Shamim, Atif

    2014-10-14

    An apparatus, system, and method for Gain Enhanced LTCC System-on-Package radar sensor. The sensor includes a substrate and an integrated circuit coupled to the substrate, where the integrated circuit is configured to transmit and receive radio frequency (RF) signals. An antenna may be coupled to the integrated circuit and a lens may be coupled to the antenna. The lens may be configured to enhance the gain of the sensor.

  6. Suppression of Gain Ripples in Superconducting Traveling-Wave Kinetic Inductance Amplifiers

    Science.gov (United States)

    Bal, Mustafa; Erickson, Robert P.; Ku, Hsiang Sheng; Wu, Xian; Pappas, David P.

    Superconducting traveling-wave kinetic inductance (KIT) amplifiers demonstrated gain over a wide bandwidth with high dynamic range and low noise. However, the gain curve exhibits ripples. Impedance mismatch at the input and output ports of the KIT amplifier as wells as split ground planes of the coplanar waveguide (CPW) geometry are potential contributors to the ripple in the gain curve. Here we study the origin of these ripples in KIT amplifiers configured in CPW geometry using approximately 20 nm thick NbTiN films grown by reactive co-sputtering of NbN and TiN. Our NbTiN films have non-linear kinetic inductance as a function of current, described by L =L0 (1 +(I /I*) 2) , where I* = 15 . 96 +/- 0 . 11 mA measured by time domain reflectometry. We report the results of implementing an impedance taper that takes into account a significantly reduced phase velocity as it narrows, adding Au onto the CPW split grounds, as well as employing different designs of dispersion engineering. Qubit Measurements using KIT amplifiers will also be reported.

  7. Fast estimation of expected information gains for Bayesian experimental designs based on Laplace approximations

    KAUST Repository

    Long, Quan; Scavino, Marco; Tempone, Raul; Wang, Suojin

    2013-01-01

    Shannon-type expected information gain can be used to evaluate the relevance of a proposed experiment subjected to uncertainty. The estimation of such gain, however, relies on a double-loop integration. Moreover, its numerical integration in multi-dimensional cases, e.g., when using Monte Carlo sampling methods, is therefore computationally too expensive for realistic physical models, especially for those involving the solution of partial differential equations. In this work, we present a new methodology, based on the Laplace approximation for the integration of the posterior probability density function (pdf), to accelerate the estimation of the expected information gains in the model parameters and predictive quantities of interest. We obtain a closed-form approximation of the inner integral and the corresponding dominant error term in the cases where parameters are determined by the experiment, such that only a single-loop integration is needed to carry out the estimation of the expected information gain. To deal with the issue of dimensionality in a complex problem, we use a sparse quadrature for the integration over the prior pdf. We demonstrate the accuracy, efficiency and robustness of the proposed method via several nonlinear numerical examples, including the designs of the scalar parameter in a one-dimensional cubic polynomial function, the design of the same scalar in a modified function with two indistinguishable parameters, the resolution width and measurement time for a blurred single peak spectrum, and the boundary source locations for impedance tomography in a square domain. © 2013 Elsevier B.V.

  8. Fast estimation of expected information gains for Bayesian experimental designs based on Laplace approximations

    KAUST Repository

    Long, Quan

    2013-06-01

    Shannon-type expected information gain can be used to evaluate the relevance of a proposed experiment subjected to uncertainty. The estimation of such gain, however, relies on a double-loop integration. Moreover, its numerical integration in multi-dimensional cases, e.g., when using Monte Carlo sampling methods, is therefore computationally too expensive for realistic physical models, especially for those involving the solution of partial differential equations. In this work, we present a new methodology, based on the Laplace approximation for the integration of the posterior probability density function (pdf), to accelerate the estimation of the expected information gains in the model parameters and predictive quantities of interest. We obtain a closed-form approximation of the inner integral and the corresponding dominant error term in the cases where parameters are determined by the experiment, such that only a single-loop integration is needed to carry out the estimation of the expected information gain. To deal with the issue of dimensionality in a complex problem, we use a sparse quadrature for the integration over the prior pdf. We demonstrate the accuracy, efficiency and robustness of the proposed method via several nonlinear numerical examples, including the designs of the scalar parameter in a one-dimensional cubic polynomial function, the design of the same scalar in a modified function with two indistinguishable parameters, the resolution width and measurement time for a blurred single peak spectrum, and the boundary source locations for impedance tomography in a square domain. © 2013 Elsevier B.V.

  9. An output amplitude configurable wideband automatic gain control with high gain step accuracy

    International Nuclear Information System (INIS)

    He Xiaofeng; Ye Tianchun; Mo Taishan; Ma Chengyan

    2012-01-01

    An output amplitude configurable wideband automatic gain control (AGC) with high gain step accuracy for the GNSS receiver is presented. The amplitude of an AGC is configurable in order to cooperate with baseband chips to achieve interference suppression and be compatible with different full range ADCs. And what's more, the gain-boosting technology is introduced and the circuit is improved to increase the step accuracy. A zero, which is composed by the source feedback resistance and the source capacity, is introduced to compensate for the pole. The AGC is fabricated in a 0.18 μm CMOS process. The AGC shows a 62 dB gain control range by 1 dB each step with a gain error of less than 0.2 dB. The AGC provides 3 dB bandwidth larger than 80 MHz and the overall power consumption is less than 1.8 mA, and the die area is 800 × 300 μm 2 . (semiconductor integrated circuits)

  10. Improving graduation rates for African Americans in drug court: Importance of human relationships and barriers to gaining and sustaining employment.

    Science.gov (United States)

    Gallagher, John Robert; Nordberg, Anne; Dibley, Alyssa R

    2017-11-16

    Drug courts have been an important part of the criminal justice system since 1989. They continue to expand throughout the United States because nearly three decades of research has shown that they are more effective than other interventions, such as traditional probation. There is a pattern, though, in some drug courts where African Americans are less likely to graduate than their Caucasian counterparts. This qualitative study explores this phenomenon by asking African American participants (n = 31) their views on the most helpful aspects of drug court and how drug court could be more helpful in supporting them in graduating the program. Participants felt that the respect and compassion they received from the drug court judge and their case managers, as well as the camaraderie they developed with other participants, was an aspect of drug court that supported them in graduating the program. Next, participants felt that graduation rates would improve if drug court better supported them in gaining employment or sustaining the employment they already had. Implications for drug court practice are discussed.

  11. Employment Effects of educational measures for work-injured people

    DEFF Research Database (Denmark)

    Bach, Henning Bjerregaard; Datta Gupta, Nabanita; Høgelund, Jan

    Vocational rehabilitation in the form of education is the cornerstone of governmental rehabilitation programs for the work-disabled in many countries. Merging a 2004 Danish survey to register information from the Danish National Board of Industrial Injuries, we assess the employment effects...... employers a partial wage subsidy for disabled workers’ wages, by distinguishing between education effects of a return to wage-subsidized work versus a return to ordinary work. Unlike previous studies, we find a positive impact of educational measures on the probability of returning to work for the work...

  12. Novel Faraday cup for the simultaneous observation and measurement of ion-beam currents

    International Nuclear Information System (INIS)

    Wei, C.Y.; Seidman, D.N.

    1977-07-01

    The Faraday cup is constructed around a Galileo channel electron multiplier array (CEMA) which serves as the basis of an internal image intensification system (a gain of greater than 10 4 ) for the observation of the ion beam; the CEMA also acts as a collector for the ion cured by a Keithley 602 electrometer. The ion current is integrated by a simple and inexpensive dosimeter; the electronic circuit for the dosimeter is described. The application of the Faraday cup to the observation and measurement of a 30 keV Ar + ion beam is presented as an illustrative example. This Faraday cup was also employed to observe and measure 30 keV Cr + , Mo + or W + and 18 keV Au + ion beams employed for the in-situ irradiation of field-ion microscope specimens

  13. High gain semiconductor optical amplifier — Laser diode at visible wavelength

    KAUST Repository

    Shen, Chao; Lee, Changmin; Ng, Tien Khee; Nakamura, Shuji; Speck, James S.; DenBaars, Steven P.; Alyamani, Ahmed Y.; El-Desouki, Munir M.; Ooi, Boon S.

    2017-01-01

    We reported on the first experimental demonstration of a two-section semipolar InGaN-based laser diode with monolithically integrated semiconductor optical amplifier (SOA-LD). The onset of amplification effect was measured at 4V SOA bias (VSOA). The SOA-LD shows a large gain of 5.32 dB at Vsoa = 6 V.

  14. High gain semiconductor optical amplifier — Laser diode at visible wavelength

    KAUST Repository

    Shen, Chao

    2017-02-07

    We reported on the first experimental demonstration of a two-section semipolar InGaN-based laser diode with monolithically integrated semiconductor optical amplifier (SOA-LD). The onset of amplification effect was measured at 4V SOA bias (VSOA). The SOA-LD shows a large gain of 5.32 dB at Vsoa = 6 V.

  15. X-ray imaging with amorphous selenium: Pulse height measurements of avalanche gain fluctuations

    International Nuclear Information System (INIS)

    Lui, Brian J. M.; Hunt, D. C.; Reznik, A.; Tanioka, K.; Rowlands, J. A.

    2006-01-01

    Avalanche multiplication in amorphous selenium (a-Se) can provide a large, adjustable gain for active matrix flat panel imagers (AMFPI), enabling quantum noise limited x-ray imaging during both radiography and fluoroscopy. In the case of direct conversion AMFPI, the multiplication factor for each x ray is a function of its depth of interaction, and the resulting variations in gain can reduce the detective quantum efficiency (DQE) of the system. An experimental method was developed to measure gain fluctuations by analyzing images of individual x rays that were obtained using a video camera with an a-Se target operated in avalanche mode. Pulse height spectra (PHS) of the charge produced per x ray were recorded for monoenergetic 30.9, 49.4, and 73.8 keV x-ray sources. The rapid initial decay and long tail of each PHS can be explained by a model in which positive charge dominates the initiation of avalanche. The Swank information factor quantifies the effect of gain fluctuation on DQE and was calculated from the PHS. The information factor was found to be 0.5 for a 25 μm a-Se layer with a maximum gain of ∼300. Changing the energy of the incident x ray influenced the range of the primary photoelectron and noticeably affected the tail of the experimental PHS, but did not significantly change the avalanche Swank factor

  16. Gains of integrating sector-wise pollution regulation

    DEFF Research Database (Denmark)

    Jacobsen, Lars Bo; Nielsen, Max; Nielsen, Rasmus

    2016-01-01

    This paper extends the Orani-G Computable General Equilibrium model with an externality market. The externality market is modelled with a limited number of pollution permits that are traded between representative firms in different sectors. The model is applied to identify the gains of a common...... of introducing more coherent regulatory frameworks that include all polluters under the same regulatory system....

  17. Oxygen measurement by multimode diode lasers employing gas correlation spectroscopy.

    Science.gov (United States)

    Lou, Xiutao; Somesfalean, Gabriel; Chen, Bin; Zhang, Zhiguo

    2009-02-10

    Multimode diode laser (MDL)-based correlation spectroscopy (COSPEC) was used to measure oxygen in ambient air, thereby employing a diode laser (DL) having an emission spectrum that overlaps the oxygen absorption lines of the A band. A sensitivity of 700 ppm m was achieved with good accuracy (2%) and linearity (R(2)=0.999). For comparison, measurements of ambient oxygen were also performed by tunable DL absorption spectroscopy (TDLAS) technique employing a vertical cavity surface emitting laser. We demonstrate that, despite slightly degraded sensitivity, the MDL-based COSPEC-based oxygen sensor has the advantages of high stability, low cost, ease-of-use, and relaxed requirements in component selection and instrument buildup compared with the TDLAS-based instrument.

  18. Seeking and securing work: Individual-level predictors of employment of psychiatric survivors.

    Science.gov (United States)

    Hall, Peter V; Montgomery, Phyllis; Davie, Samantha; Dickins, Kevin; Forchuk, Cheryl; Jeng, Momodou S; Kersey, Melissa; Meier, Amanda; Lahey, Pam; Rudnick, Abraham; Solomon, Michelle; Warner, Laura

    2015-01-01

    For people with mental illness (psychiatric survivors), seeking and securing employment involves personal, social, and environmental factors. In Canada, psychiatric survivors are under-represented in the workforce, and services can help by tailoring their supports to help make the most gains in employment. Determine whether individual socio-demographic and health factors predict seeking and securing employment among psychiatric survivors. A community sample of psychiatric survivors from a Southwestern Ontario region participated in this study. Stepwise logistic regression was used to analyze data from 363 participants who had completed a variety of questionnaires to ascertain individual characteristics and employment outcomes. Health service utilization, living circumstances, homelessness, substance use issues, general health, social integration, ethnicity, having children under 18, and being a student emerged as significant predictors of seeking and securing work. Other commonly accepted human capital indicators, such as education and age, were not predictive of employment search behavior and outcomes. Individual characteristics that predict employment search and success outcomes for psychiatric survivors include aspects related to treatment and living circumstances, which stands in contrast to predictors of employment for the general population, suggesting that employment support services may need to be tailored to psychiatric survivors specifically.

  19. Lower-power, high-linearity class-AB current-mode programmable gain amplifier

    International Nuclear Information System (INIS)

    Wu Yiqiang; Wang Zhigong; Wang Junliang; Ma Li; Xu Jian; Tang Lu

    2014-01-01

    A novel class-AB implementation of a current-mode programmable gain amplifier (CPGA) including a current-mode DC offset cancellation loop is presented. The proposed CPGA is based on a current amplifier and provides a current gain in a range of 40 dB with a 1 dB step. The CPGA is characterized by a wide range of current gain variation, a lower power dissipation, and a small chip size. The proposed circuit is fabricated using a 0.18 μm CMOS technology. The CPGA draws a current of less than 2.52 mA from a 1.8 V supply while occupying an active area of 0.099 μm 2 . The measured results show an overall gain variation from 10 to 50 dB with a gain error of less than 0.40 dB. The OP 1dB varies from 11.80 to 13.71 dBm, and the 3 dB bandwidth varies from 22.2 to 34.7 MHz over the whole gain range. (semiconductor integrated circuits)

  20. Time-optimal control of nuclear reactor power with adaptive proportional- integral-feedforward gains

    International Nuclear Information System (INIS)

    Park, Moon Ghu; Cho, Nam Zin

    1993-01-01

    A time-optimal control method which consists of coarse and fine control stages is described here. During the coarse control stage, the maximum control effort (time-optimal) is used to direct the system toward the switching boundary which is set near the desired power level. At this boundary, the controller is switched to the fine control stage in which an adaptive proportional-integral-feedforward (PIF) controller is used to compensate for any unmodeled reactivity feedback effects. This fine control is also introduced to obtain a constructive method for determining the (adaptive) feedback gains against the sampling effect. The feedforward control term is included to suppress the over-or undershoot. The estimation and feedback of the temperature-induced reactivity is also discussed

  1. A CMOS Integrating Amplifier for the PHENIX Ring Imaging Cherenkov detector

    International Nuclear Information System (INIS)

    Wintenberg, A.L.; Jones, J.P. Jr.; Young, G.R.; Moscone, C.G.

    1997-11-01

    A CMOS integrating amplifier has been developed for use in the PHENIX Ring Imaging Cherenkov (RICH) detector. The amplifier, consisting of a charge-integrating amplifier followed by a variable gain amplifier (VGA), is an element of a photon measurement system comprising a photomultiplier tube, a wideband, gain of 10 amplifier, the integrating amplifier, and an analog memory followed by an ADC and double correlated sampling implemented in software. The integrating amplifier is designed for a nominal full scale input of 160 pC with a gain of 20 mV/pC and a dynamic range of 1000:1. The VGA is used for equalizing gains prior to forming analog sums for trigger purposes. The gain of the VGA is variable over a 3:1 range using a 5 bits digital control, and the risetime is held to approximately 20 ns using switched compensation in the VGA. Details of the design and results from several prototype devices fabricated in 1.2 microm Orbit CMOS are presented. A complete noise analysis of the integrating amplifier and the correlated sampling process is included as well as a comparison of calculated, simulated and measured results

  2. A CMOS Integrating Amplifier for the PHENIX Ring Imaging Cherenkov detector

    Energy Technology Data Exchange (ETDEWEB)

    Wintenberg, A.L.; Jones, J.P. Jr.; Young, G.R. [Oak Ridge National Lab., TN (United States); Moscone, C.G. [Tennessee Univ., Knoxville, TN (United States)

    1997-11-01

    A CMOS integrating amplifier has been developed for use in the PHENIX Ring Imaging Cherenkov (RICH) detector. The amplifier, consisting of a charge-integrating amplifier followed by a variable gain amplifier (VGA), is an element of a photon measurement system comprising a photomultiplier tube, a wideband, gain of 10 amplifier, the integrating amplifier, and an analog memory followed by an ADC and double correlated sampling implemented in software. The integrating amplifier is designed for a nominal full scale input of 160 pC with a gain of 20 mV/pC and a dynamic range of 1000:1. The VGA is used for equalizing gains prior to forming analog sums for trigger purposes. The gain of the VGA is variable over a 3:1 range using a 5 bits digital control, and the risetime is held to approximately 20 ns using switched compensation in the VGA. Details of the design and results from several prototype devices fabricated in 1.2 {micro}m Orbit CMOS are presented. A complete noise analysis of the integrating amplifier and the correlated sampling process is included as well as a comparison of calculated, simulated and measured results.

  3. Multi-parameter Nonlinear Gain Correction of X-ray Transition Edge Sensors for the X-ray Integral Field Unit

    Science.gov (United States)

    Cucchetti, E.; Eckart, M. E.; Peille, P.; Porter, F. S.; Pajot, F.; Pointecouteau, E.

    2018-04-01

    With its array of 3840 Transition Edge Sensors (TESs), the Athena X-ray Integral Field Unit (X-IFU) will provide spatially resolved high-resolution spectroscopy (2.5 eV up to 7 keV) from 0.2 to 12 keV, with an absolute energy scale accuracy of 0.4 eV. Slight changes in the TES operating environment can cause significant variations in its energy response function, which may result in systematic errors in the absolute energy scale. We plan to monitor such changes at pixel level via onboard X-ray calibration sources and correct the energy scale accordingly using a linear or quadratic interpolation of gain curves obtained during ground calibration. However, this may not be sufficient to meet the 0.4 eV accuracy required for the X-IFU. In this contribution, we introduce a new two-parameter gain correction technique, based on both the pulse-height estimate of a fiducial line and the baseline value of the pixels. Using gain functions that simulate ground calibration data, we show that this technique can accurately correct deviations in detector gain due to changes in TES operating conditions such as heat sink temperature, bias voltage, thermal radiation loading and linear amplifier gain. We also address potential optimisations of the onboard calibration source and compare the performance of this new technique with those previously used.

  4. [A novel biologic electricity signal measurement based on neuron chip].

    Science.gov (United States)

    Lei, Yinsheng; Wang, Mingshi; Sun, Tongjing; Zhu, Qiang; Qin, Ran

    2006-06-01

    Neuron chip is a multiprocessor with three pipeline CPU; its communication protocol and control processor are integrated in effect to carry out the function of communication, control, attemper, I/O, etc. A novel biologic electronic signal measurement network system is composed of intelligent measurement nodes with neuron chip at the core. In this study, the electronic signals such as ECG, EEG, EMG and BOS can be synthetically measured by those intelligent nodes, and some valuable diagnostic messages are found. Wavelet transform is employed in this system to analyze various biologic electronic signals due to its strong time-frequency ability of decomposing signal local character. Better effect is gained. This paper introduces the hardware structure of network and intelligent measurement node, the measurement theory and the signal figure of data acquisition and processing.

  5. Climate Change and employment. Impact on employment in the European Union-25 of climate change and CO2 emission reduction measures by 2030

    Energy Technology Data Exchange (ETDEWEB)

    Dupressoir, S.; Belen Sanchez, A.; Bobe, P.; Hoefele, V. (and others)

    2007-05-15

    This study was intended provide an analysis of the potential costs and benefits for employment of the policies and measures against climate change as well as of the manifestations of the consequences of climate change in Europe. This report comprises two divisions. The first, entitled 'Impact of climate change', attempts to determine the potential impact on employment in Europe of the consequences of climate change (Part 1). The second, entitled 'Impact of CO2 emission reduction measures', analyses the potential implications for employment of climate-change prevention policies in the EU with time-horizons of 2012 and 2030 (Parts 2 to 4). The conclusions and recommendations of the study appear in four parts : Part 1 analyses the potential consequences for employment of climatic warming in Europe; Part 2 presents the objectives, the hypotheses and the methodology of the 'impact of CO2 emission reduction measures' division; Part 3 analyses the foreseeable effects of CO2 emission reduction measures on employment in Europe; Part 4 offers general (or sector-wide) recommendations for measures and policies to promote positive effects and prevent negative effects. The concluding part discusses the uncertainties and identifies the questions deserving further investigation.

  6. An analytical method for PID controller tuning with specified gain and phase margins for integral plus time delay processes.

    Science.gov (United States)

    Hu, Wuhua; Xiao, Gaoxi; Li, Xiumin

    2011-04-01

    In this paper, an analytical method is proposed for proportional-integral/proportional-derivative/proportional-integral-derivative (PI/PD/PID) controller tuning with specified gain and phase margins (GPMs) for integral plus time delay (IPTD) processes. Explicit formulas are also obtained for estimating the GPMs resulting from given PI/PD/PID controllers. The proposed method indicates a general form of the PID parameters and unifies a large number of existing rules as PI/PD/PID controller tuning with various GPM specifications. The GPMs realized by existing PID tuning rules are computed and documented as a reference for control engineers to tune the PID controllers. Copyright © 2011 ISA. Published by Elsevier Ltd. All rights reserved.

  7. Novel Faraday cup for the simultaneous observation and measurement of ion-beam currents

    International Nuclear Information System (INIS)

    Wei, C.; Seidman, D.N.

    1977-01-01

    A novel Faraday cup is described which allows the simultaneous observation and measurement of ion-beam currents. The Faraday cup is constructed around a Galileo channel electron multiplier array (CEMA), which serves as the basis of an internal image intensification system (a gain of >10 4 ) for the observation of the ion beam; the CEMA also acts as a collector for the ion current which is measured by a Keithley 602 electrometer. The ion current is integrated by a simple and inexpensive dosimeter; the electronic circuit for the dosimeter is described. The application of the Faraday cup to the observation and measurement of a 30-keV Ar + ion beam is presented as an illustrative example. We have also employed this Faraday cup to observe and measure 30-keV Cr + , Mo + , or W + , and 18-keV Au + ion beams employed for the in situ irradiation of field-ion microscope specimens

  8. Annual measurements of gain and loss in aboveground carbon density

    Science.gov (United States)

    Baccini, A.; Walker, W. S.; Carvalho, L.; Farina, M.; Sulla-menashe, D. J.; Houghton, R. A.

    2017-12-01

    Tropical forests hold large stores of carbon, but their net carbon balance is uncertain. Land use and land-cover change (LULCC) are believed to release between 0.81 and 1.14 PgC yr-1, while intact native forests are thought to be a net carbon sink of approximately the same magnitude. Reducing the uncertainty of these estimates is not only fundamental to the advancement of carbon cycle science but is also of increasing relevance to national and international policies designed to reduce emissions from deforestation and forest degradation (e.g., REDD+). Contemporary approaches to estimating the net carbon balance of tropical forests rely on changes in forest area between two periods, typically derived from satellite data, together with information on average biomass density. These approaches tend to capture losses in biomass due to deforestation (i.e., wholesale stand removals) but are limited in their sensitivity to forest degradation (e.g., selective logging or single-tree removals), which can account for additional biomass losses on the order of 47-75% of deforestation. Furthermore, while satellite-based estimates of forest area loss have been used successfully to estimate associated carbon losses, few such analyses have endeavored to determine the rate of carbon sequestration in growing forests. Here we use 12 years (2003-2014) of pantropical satellite data to quantify net annual changes in the aboveground carbon density of woody vegetation (MgC ha-1yr-1), providing direct, measurement-based evidence that the world's tropical forests are a net carbon source of 425.2 ± 92.0 Tg C yr-1. This net release of carbon consists of losses of 861.7 ± 80.2 Tg C yr-1 and gains of -436.5 ± 31.0 Tg C yr-1 . Gains result from forest growth; losses result from reductions in forest area due to deforestation and from reductions in biomass density within standing forests (degradation), with the latter accounting for 68.9% of overall losses. Our findings advance previous research

  9. In-circuit-measurement of parasitic elements in high gain high bandwidth low noise transimpedance amplifiers.

    Science.gov (United States)

    Cochems, P; Kirk, A; Zimmermann, S

    2014-12-01

    Parasitic elements play an important role in the development of every high performance circuit. In the case of high gain, high bandwidth transimpedance amplifiers, the most important parasitic elements are parasitic capacitances at the input and in the feedback path, which significantly influence the stability, the frequency response, and the noise of the amplifier. As these parasitic capacitances range from a few picofarads down to only a few femtofarads, it is nearly impossible to measure them accurately using traditional LCR meters. Unfortunately, they also cannot be easily determined from the transfer function of the transimpedance amplifier, as it contains several overlapping effects and its measurement is only possible when the circuit is already stable. Therefore, we developed an in-circuit measurement method utilizing minimal modifications to the input stage in order to measure its parasitic capacitances directly and with unconditional stability. Furthermore, using the data acquired with this measurement technique, we both proposed a model for the complicated frequency response of high value thick film resistors as they are used in high gain transimpedance amplifiers and optimized our transimpedance amplifier design.

  10. Resolved discrepancies between visible spontaneous Raman cross-section and direct near-infrared Raman gain measurements in TeO2-based glasses.

    Science.gov (United States)

    Rivero, Clara; Stegeman, Robert; Couzi, Michel; Talaga, David; Cardinal, Thierry; Richardson, Kathleen; Stegeman, George

    2005-06-13

    Disagreements on the Raman gain response of different tellurite-based glasses, measured at different wavelengths, have been recently reported in the literature. In order to resolve this controversy, a multi-wavelength Raman cross-section experiment was conducted on two different TeO2-based glass samples. The estimated Raman gain response of the material shows good agreement with the directly-measured Raman gain data at 1064 nm, after correction for the dispersion and wavelength-dependence of the Raman gain process.

  11. Experimental validation of alternate integral-formulation method for predicting acoustic radiation based on particle velocity measurements.

    Science.gov (United States)

    Ni, Zhi; Wu, Sean F

    2010-09-01

    This paper presents experimental validation of an alternate integral-formulation method (AIM) for predicting acoustic radiation from an arbitrary structure based on the particle velocities specified on a hypothetical surface enclosing the target source. Both the normal and tangential components of the particle velocity on this hypothetical surface are measured and taken as the input to AIM codes to predict the acoustic pressures in both exterior and interior regions. The results obtained are compared with the benchmark values measured by microphones at the same locations. To gain some insight into practical applications of AIM, laser Doppler anemometer (LDA) and double hotwire sensor (DHS) are used as measurement devices to collect the particle velocities in the air. Measurement limitations of using LDA and DHS are discussed.

  12. A low power automatic gain control loop for a receiver

    Energy Technology Data Exchange (ETDEWEB)

    Li Guofeng; Geng Zhiqing; Wu Nanjian, E-mail: nanjian@red.semi.ac.c [State Key Laboratory for Super lattices and Microstructures, Institute of Semiconductors, Chinese Academy of Sciences, Beijing 100083 (China)

    2010-09-15

    This paper proposes a new structure to lower the power consumption of a variable gain amplifier (VGA) and keep the linearity of the VGA unchanged. The structure is used in a high rate amplitude-shift keying (ASK) based IF-stage. It includes an automatic gain control (AGC) loop and ASK demodulator. The AGC mainly consists of six-stage VGAs. The IF-stage is realized in 0.18 {mu}m CMOS technology. The measurement results show that the power consumption of the whole system is very low. The system consumes 730 {mu}A while operating at 1.8 V. The minimum ASK signal the system could detect is 0.7 mV (peak to peak amplitude). (semiconductor integrated circuits)

  13. Employment, social capital, and community participation among Israelis with disabilities.

    Science.gov (United States)

    Araten-Bergman, Tal; Stein, Michael Ashley

    2014-01-01

    Employment, social capital, and community participation have emerged in recent years as significant concepts for realizing the human rights of individuals with disabilities. Yet the theoretical interrelationship of these concepts remains largely overlooked, as does the empirical basis for understanding the underlying connections. This study explores the relationship between employment status, social capital, community participation, and well-being among Israelis with disabilities. It also explores the unique contribution of social capital to the well-being and integration of individuals with disabilities. 274 participants with self-reported disabilities completed a questionnaire containing measures of individual social capital, community participation, well-being, and background data. Correlation and Univariate analysis were used to compare scores between employed (n=131) and non-employed (n=143) participants, and logistic regression analysis was conducted to test the unique contribution of employment to social inclusion and well-being. Employed participants reported significantly higher levels of social capital and were more integrated in leisure and civic activities than their non-employed counterparts. Moreover, employment status was found to have a significant contribution to the variance in the subjective well-being of participants. By more fully understanding the importance of social capital for community inclusion, practitioners can better address the importance of network-building during the rehabilitation process as a means of promoting social and vocational integration.

  14. Energy Gaining Windows for Residental Buildings

    DEFF Research Database (Denmark)

    Kragh, Jesper; Laustsen, Jacob Birck; Svendsen, Svend

    2008-01-01

    This paper presents some of the research done during the last 8 years at the Technical University of Denmark developing improved low-energy window solutions. The focus has been on maximizing the net energy gain of windows for residential buildings. The net energy gain of windows is the solar gain...... minus the heat loss integrated over the heating season. It is assumed that in northern cold climates all of the solar gain during the heating season can be utilized for space heating. Problems with overheating in the summer period must be solved with overhang or moveable solar shading devices. Two...... and longer durability of the window. The glazing in these fiber reinforced polyester windows is both unsealed and sealed triple glazing units. To increase the net energy gain slim frame profiles have been developed to increase the glazing area and thereby the solar gain. The challenge when developing slim...

  15. Population inversion and gain measurements for soft x-ray-laser development in a magnetically confined plasma column

    International Nuclear Information System (INIS)

    Suckewer, S.; Skinner, C.H.; Voorhees, D.; Milchberg, H.; Keane, C.; Semet, A.

    1983-06-01

    We present population inversion and gain measurements from an experimental investigation of possibilities to obtain high gain and lasing action in the soft x-ray region. Our approach to soft x-ray-laser development is based on rapid plasma cooling after the laser pulse by radiation losses, leading to fast recombination and collisional cascade into upper excited levels of CVI, for example, while the lower excited levels depopulate rapidly by radiative transitions, thus creating population inversions and gain. A approx. = 0.5 kJ CO 2 laser was focused onto a target of solid carbon or teflon; or CO 2 , O 2 , Ne gas, and the resulting plasma confined in a 50 to 90 kG magnetic field. Spectroscopic diagnostics with absolute intensity calibration were used to measure level populations

  16. Receiver Gain Modulation Circuit

    Science.gov (United States)

    Jones, Hollis; Racette, Paul; Walker, David; Gu, Dazhen

    2011-01-01

    A receiver gain modulation circuit (RGMC) was developed that modulates the power gain of the output of a radiometer receiver with a test signal. As the radiometer receiver switches between calibration noise references, the test signal is mixed with the calibrated noise and thus produces an ensemble set of measurements from which ensemble statistical analysis can be used to extract statistical information about the test signal. The RGMC is an enabling technology of the ensemble detector. As a key component for achieving ensemble detection and analysis, the RGMC has broad aeronautical and space applications. The RGMC can be used to test and develop new calibration algorithms, for example, to detect gain anomalies, and/or correct for slow drifts that affect climate-quality measurements over an accelerated time scale. A generalized approach to analyzing radiometer system designs yields a mathematical treatment of noise reference measurements in calibration algorithms. By treating the measurements from the different noise references as ensemble samples of the receiver state, i.e. receiver gain, a quantitative description of the non-stationary properties of the underlying receiver fluctuations can be derived. Excellent agreement has been obtained between model calculations and radiometric measurements. The mathematical formulation is equivalent to modulating the gain of a stable receiver with an externally generated signal and is the basis for ensemble detection and analysis (EDA). The concept of generating ensemble data sets using an ensemble detector is similar to the ensemble data sets generated as part of ensemble empirical mode decomposition (EEMD) with exception of a key distinguishing factor. EEMD adds noise to the signal under study whereas EDA mixes the signal with calibrated noise. It is mixing with calibrated noise that permits the measurement of temporal-functional variability of uncertainty in the underlying process. The RGMC permits the evaluation of EDA by

  17. Demonstration of Millimeter Wave 5G Setup Employing High-Gain Vivaldi Array

    Directory of Open Access Journals (Sweden)

    Waleed Tariq Sethi

    2018-01-01

    Full Text Available We present a 4 × 4 slot-coupled Vivaldi antenna (SCVA array unit cell, which offers wide bandwidth and high gain (~23 dBi at the millimeter wave (mmW frequencies of 28 GHz and 38 GHz. A single SCVA element is first presented, which has a bandwidth of 25–40 GHz with an average gain of ~13 dBi at the frequencies of interest. This antenna element is then used to design a 1 × 4 linear SCVA array matched to a 50 Ω impedance via a modified Wilkinson power divider (WPD. Next, the 1 × 4 linear array is used to construct a 4 × 4 antenna array unit cell. The proposed 4 × 4 antenna array unit cell is fabricated, and the characteristics of its elements (i.e., the single SCVA, 1 × 4 linear array, and WPD are thoroughly investigated. Further, the 4 × 4 array is tested for signal reception of various digital modulation formats at lab environment using high-speed digital signal oscilloscope. In particular, a 2.5 Gbps data rate is successfully transmitted achieving receiver sensitivity of −50 dBm at 2 × 10−3 bit error rate (BER for 32 quadrature amplitude modulation (QAM with a system baud rate of 500 MHz. The wide bandwidth and high gain along with the excellent performance of the proposed 4 × 4 antenna array unit cell makes it an excellent candidate for future 5G wireless communication applications.

  18. Actinide integral measurements in the CFRMF and integral tests for ENDF/B-V

    International Nuclear Information System (INIS)

    Anderl, R.A.

    1982-01-01

    Integral capture and/or fission rates have been reported earlier for several actinides irradiated in the fast neutron field of the Coupled Fast Reactivity Measurements Facility (CFRMF). These nuclides include 232 Th, 233 U, 235 U, 238 U, 237 Np, 239 Pu, 240 Pu, 242 Pu, 241 Am and 243 Am. This paper forucses on the utilization of these integral data for testing the respective cross sections on ENDF/B-V. Integral cross sections derived from the measured reaction rates are tabulated. Results are presented for cross-section data testing which includes integral testing based on a comparison of calculated and measured integral cross sections and testing based on least-squares-adjustment analyses

  19. Measuring solar reflectance - Part I: Defining a metric that accurately predicts solar heat gain

    Energy Technology Data Exchange (ETDEWEB)

    Levinson, Ronnen; Akbari, Hashem; Berdahl, Paul [Heat Island Group, Environmental Energy Technologies Division, Lawrence Berkeley National Laboratory, 1 Cyclotron Road, Berkeley, CA 94720 (United States)

    2010-09-15

    Solar reflectance can vary with the spectral and angular distributions of incident sunlight, which in turn depend on surface orientation, solar position and atmospheric conditions. A widely used solar reflectance metric based on the ASTM Standard E891 beam-normal solar spectral irradiance underestimates the solar heat gain of a spectrally selective ''cool colored'' surface because this irradiance contains a greater fraction of near-infrared light than typically found in ordinary (unconcentrated) global sunlight. At mainland US latitudes, this metric R{sub E891BN} can underestimate the annual peak solar heat gain of a typical roof or pavement (slope {<=} 5:12 [23 ]) by as much as 89 W m{sup -2}, and underestimate its peak surface temperature by up to 5 K. Using R{sub E891BN} to characterize roofs in a building energy simulation can exaggerate the economic value N of annual cool roof net energy savings by as much as 23%. We define clear sky air mass one global horizontal (''AM1GH'') solar reflectance R{sub g,0}, a simple and easily measured property that more accurately predicts solar heat gain. R{sub g,0} predicts the annual peak solar heat gain of a roof or pavement to within 2 W m{sup -2}, and overestimates N by no more than 3%. R{sub g,0} is well suited to rating the solar reflectances of roofs, pavements and walls. We show in Part II that R{sub g,0} can be easily and accurately measured with a pyranometer, a solar spectrophotometer or version 6 of the Solar Spectrum Reflectometer. (author)

  20. Measuring solar reflectance Part I: Defining a metric that accurately predicts solar heat gain

    Energy Technology Data Exchange (ETDEWEB)

    Levinson, Ronnen; Akbari, Hashem; Berdahl, Paul

    2010-05-14

    Solar reflectance can vary with the spectral and angular distributions of incident sunlight, which in turn depend on surface orientation, solar position and atmospheric conditions. A widely used solar reflectance metric based on the ASTM Standard E891 beam-normal solar spectral irradiance underestimates the solar heat gain of a spectrally selective 'cool colored' surface because this irradiance contains a greater fraction of near-infrared light than typically found in ordinary (unconcentrated) global sunlight. At mainland U.S. latitudes, this metric RE891BN can underestimate the annual peak solar heat gain of a typical roof or pavement (slope {le} 5:12 [23{sup o}]) by as much as 89 W m{sup -2}, and underestimate its peak surface temperature by up to 5 K. Using R{sub E891BN} to characterize roofs in a building energy simulation can exaggerate the economic value N of annual cool-roof net energy savings by as much as 23%. We define clear-sky air mass one global horizontal ('AM1GH') solar reflectance R{sub g,0}, a simple and easily measured property that more accurately predicts solar heat gain. R{sub g,0} predicts the annual peak solar heat gain of a roof or pavement to within 2 W m{sup -2}, and overestimates N by no more than 3%. R{sub g,0} is well suited to rating the solar reflectances of roofs, pavements and walls. We show in Part II that R{sub g,0} can be easily and accurately measured with a pyranometer, a solar spectrophotometer or version 6 of the Solar Spectrum Reflectometer.

  1. High linearity current communicating passive mixer employing a simple resistor bias

    International Nuclear Information System (INIS)

    Liu Rongjiang; Guo Guiliang; Yan Yuepeng

    2013-01-01

    A high linearity current communicating passive mixer including the mixing cell and transimpedance amplifier (TIA) is introduced. It employs the resistor in the TIA to reduce the source voltage and the gate voltage of the mixing cell. The optimum linearity and the maximum symmetric switching operation are obtained at the same time. The mixer is implemented in a 0.25 μm CMOS process. The test shows that it achieves an input third-order intercept point of 13.32 dBm, conversion gain of 5.52 dB, and a single sideband noise figure of 20 dB. (semiconductor integrated circuits)

  2. Disability Employment 101

    Science.gov (United States)

    US Department of Education, 2007

    2007-01-01

    Business is about productivity and maintaining a competitive advantage. To do this, business needs qualified workers. Hiring people with disabilities adds value to a business and will attract new customers. Disability is not inability. Employers can make sound business decisions and gain a competitive advantage by using this guide to increase the…

  3. Work Values, Cognitive Strategies, and Applicant Reactions in a Structured Pre-Employment Interview for Ethical Integrity.

    Science.gov (United States)

    Pawlowski, Donna R.; Hollwitz, John

    2000-01-01

    Notes that companies emphasize ethical behavior, and schools and professional groups devote many resources to applied ethics training. Describes initial construct validation of a structured ethical integrity pre-employment interview. Reviews evidence relating to cognitive and impression management strategies used when college students encounter an…

  4. Grid Based Integration Technologies of Virtual Measurement System

    International Nuclear Information System (INIS)

    Zhang, D P; He, L S; Yang, H

    2006-01-01

    This paper presents a novel integrated architecture of measurement system for the new requirements of measurement collaboration, measurement resource interconnection and transparent access etc in the wide-area and across organization in the context of a grid. The complexity of integration on a grid arises from the scale, dynamism, autonomy, and distribution of the measurement resources. The main argument of this paper is that these complexities should be made transparent to the collaborative measurement, via flexible reconfigurable mechanisms and dynamic virtualization services. The paper is started by discussing the integration-oriented measurement architecture which provides collaborative measurement services to distributed measurement resources and then the measurement mechanisms are discussed which implements the transparent access and collaboration of measurement resources by providing protocols, measurement schedule and global data driven model

  5. Occupational change, employer change, internal migration, and earnings.

    Science.gov (United States)

    Krieg, R G

    1997-02-01

    "In this paper I use microdata from the [U.S.] Panel Study of Income Dynamics to measure the financial returns to intercounty and interstate migration for individuals in a temporal framework accounting for gains that accrue over time.... To account for the indirect effects of migration on earnings, explanatory variables are created by interacting migration status with: (1) occupational change, (2) employer change and (3) changes in both occupation and employer. These interaction terms are then included in the earnings functions. Earnings are estimated for three years subsequent to the migration decision to account for the financial returns to migration accruing over time. Results indicate that, when estimating earnings, the use of a simple migration dummy variable will mask the indirect effects of migration on earnings." excerpt

  6. Towards the development of a hybrid-integrated chip interferometer for online surface profile measurements

    International Nuclear Information System (INIS)

    Kumar, P.; Martin, H.; Jiang, X.

    2016-01-01

    Non-destructive testing and online measurement of surface features are pressing demands in manufacturing. Thus optical techniques are gaining importance for characterization of complex engineering surfaces. Harnessing integrated optics for miniaturization of interferometry systems onto a silicon wafer and incorporating a compact optical probe would enable the development of a handheld sensor for embedded metrology applications. In this work, we present the progress in the development of a hybrid photonics based metrology sensor device for online surface profile measurements. The measurement principle along with test and measurement results of individual components has been presented. For non-contact measurement, a spectrally encoded lateral scanning probe based on the laser scanning microscopy has been developed to provide fast measurement with lateral resolution limited to the diffraction limit. The probe demonstrates a lateral resolution of ∼3.6 μm while high axial resolution (sub-nanometre) is inherently achieved by interferometry. Further the performance of the hybrid tuneable laser and the scanning probe was evaluated by measuring a standard step height sample of 100 nm.

  7. Towards the development of a hybrid-integrated chip interferometer for online surface profile measurements

    Energy Technology Data Exchange (ETDEWEB)

    Kumar, P.; Martin, H.; Jiang, X. [EPSRC Centre for Innovative Manufacturing in Advanced Metrology, University of Huddersfield, Huddersfield HD1 3DH (United Kingdom)

    2016-06-15

    Non-destructive testing and online measurement of surface features are pressing demands in manufacturing. Thus optical techniques are gaining importance for characterization of complex engineering surfaces. Harnessing integrated optics for miniaturization of interferometry systems onto a silicon wafer and incorporating a compact optical probe would enable the development of a handheld sensor for embedded metrology applications. In this work, we present the progress in the development of a hybrid photonics based metrology sensor device for online surface profile measurements. The measurement principle along with test and measurement results of individual components has been presented. For non-contact measurement, a spectrally encoded lateral scanning probe based on the laser scanning microscopy has been developed to provide fast measurement with lateral resolution limited to the diffraction limit. The probe demonstrates a lateral resolution of ∼3.6 μm while high axial resolution (sub-nanometre) is inherently achieved by interferometry. Further the performance of the hybrid tuneable laser and the scanning probe was evaluated by measuring a standard step height sample of 100 nm.

  8. Accelerating Genetic Gains in Legumes for the Development of Prosperous Smallholder Agriculture: Integrating Genomics, Phenotyping, Systems Modelling and Agronomy.

    Science.gov (United States)

    Varshney, Rajeev K; Thudi, Mahendar; Pandey, Manish K; Tardieu, Francois; Ojiewo, Chris; Vadez, Vincent; Whitbread, Anthony M; Siddique, Kadambot H M; Nguyen, Henry T; Carberry, Peter S; Bergvinson, David

    2018-03-05

    Grain legumes form an important component of the human diet, feed for livestock and replenish soil fertility through biological nitrogen fixation. Globally, the demand for food legumes is increasing as they complement cereals in protein requirements and possess a high percentage of digestible protein. Climate change has enhanced the frequency and intensity of drought stress that is posing serious production constraints, especially in rainfed regions where most legumes are produced. Genetic improvement of legumes, like other crops, is mostly based on pedigree and performance-based selection over the last half century. For achieving faster genetic gains in legumes in rainfed conditions, this review article proposes the integration of modern genomics approaches, high throughput phenomics and simulation modelling as support for crop improvement that leads to improved varieties that perform with appropriate agronomy. Selection intensity, generation interval and improved operational efficiencies in breeding are expected to further enhance the genetic gain in experiment plots. Improved seed access to farmers, combined with appropriate agronomic packages in farmers' fields, will deliver higher genetic gains. Enhanced genetic gains including not only productivity but also nutritional and market traits will increase the profitability of farmers and the availability of affordable nutritious food especially in developing countries.

  9. Developing inclusive employment: lessons from Telenor Open Mind.

    Science.gov (United States)

    Kalef, Laura; Barrera, Magda; Heymann, Jody

    2014-01-01

    Despite significant gains in legal rights for people with disabilities, the employment rate for individuals with disabilities in many countries remains extremely low. Programs to promote the inclusion of people with disabilities in the workforce can have an important impact on individuals' economic and social prospects, as well as societal benefits. This article aims to explore Telenor Open Mind, a job training program at Norway's largest telecommunications company with financial support from Norway's Labor and Welfare Organization (NAV), which acts as a springboard for individuals with disabilities into the workplace. A qualitative case study design was utilized to explore the Telenor Open Mind Program. Drawing on field research conducted in Oslo during 2011, this article explores subjective experiences of individuals involved with the program, through interviews and program observations. Telenor Open Mind's two-year program is comprised of a three month training period, in which individuals participate in computer and self-development courses followed by a 21-month paid internship where participants gain hands-on experience. The program has an average 75% rate of employment upon completion and a high rate of participant satisfaction. Participation in the program led to increased self-confidence and social development. The company experienced benefits from greater workplace satisfaction and reductions in sick leave rates. The Telenor Open Mind program has provided benefits for participants, the company, and society as a whole. Participants gain training, work experience, and increased employability. Telenor gains dedicated and trained employees, in addition to reducing sick leave absences among all employees. Finally, society benefits from the Open Mind program as the individuals who gain employment become tax-payers, and no longer need to receive benefits from the government.

  10. Changes in job strain and subsequent weight gain: a longitudinal study, based on the Danish Nurse Cohort.

    Science.gov (United States)

    Vesterlund, Gitte Kingo; Keller, Amélie Cléo; Heitmann, Berit Lilienthal

    2018-04-01

    Obesity as well as job strain is increasing, and job strain might contribute to weight gain. The objective of the current study was to examine associations between longitudinal alterations in the components of job strain and subsequent weight gain. The study was designed as a prospective cohort study with three questionnaire surveys enabling measurement of job-strain alterations over 6 years and subsequent measurements of weight gain after further 10 years of follow-up. ANCOVA and trend analyses were conducted. Job demands were measured as job busyness and speed, and control as amount of influence. Employed nurses in Denmark. We included a sub-sample of 6188 female nurses from the Danish Nurse Cohort, which consisted of the nurses who participated in surveys in 1993, 1999 and 2009. A linear trend in weight gain was seen in nurses who were often busy in 1999 between those who were rarely v. sometimes v. often busy in 1993 (P=0·03), with the largest weight gain in individuals with sustained high busyness in both years. Loss of influence between 1993 and 1999 was associated with larger subsequent weight gain than sustained high influence (P=0·003) or sustained low influence (P=0·02). For speed, no associations were found. Busyness, speed and influence differed in their relationship to subsequent weight gain. A decrease in job influence and a sustained burden of busyness were most strongly related to subsequent weight gain. Focus on job strain reduction and healthy diet is essential for public health.

  11. Building Professionalism and Employability Skills: Embedding Employer Engagement within First-Year Computing Modules

    Science.gov (United States)

    Hanna, Philip; Allen, Angela; Kane, Russell; Anderson, Neil; McGowan, Aidan; Collins, Matthew; Hutchison, Malcolm

    2015-01-01

    This paper outlines a means of improving the employability skills of first-year university students through a closely integrated model of employer engagement within computer science modules. The outlined approach illustrates how employability skills, including communication, teamwork and time management skills, can be contextualised in a manner…

  12. Effect of Phase Change Materials (PCMs Integrated into a Concrete Block on Heat Gain Prevention in a Hot Climate

    Directory of Open Access Journals (Sweden)

    Ahmad Hasan

    2016-10-01

    Full Text Available In the current study, a phase change material (PCM contained in an insulated concrete block is tested in extremely hot weather in the United Arab Emirates (UAE to evaluate its cooling performance. An insulated chamber is constructed behind the block containing PCM to mimic a scaled down indoor space. The effect of placement of the PCM layer on heat gain indoors is studied at two locations: adjacent to the outer as well as the inner concrete layer. The inclusion of PCM reduced heat gain through concrete blocks compared to blocks without PCM, yielding a drop in cooling load indoors. The placement of PCM and insulation layers adjacent to indoors exhibited better cooling performance compared to that adjacent to the outdoors. In the best case, a temperature drop of 8.5% and a time lag of 2.6 h are achieved in peak indoor temperature, rendering a reduction of 44% in the heat gain. In the tested hot climate, the higher ambient temperature and the lower wind speed hampered heat dissipation and PCM re-solidification by natural ventilation. The findings recommend employing a mechanical ventilation in hot climates to enhance regeneration of the PCM to solid state for its optimal performance.

  13. Possibility and necessity measures and integral equivalence

    Czech Academy of Sciences Publication Activity Database

    Chen, T.; Mesiar, Radko; Li, J.; Stupňanová, A.

    2017-01-01

    Roč. 86, č. 1 (2017), s. 62-72 ISSN 0888-613X Institutional support: RVO:67985556 Keywords : Integral equivalence * Necessity measure * Possibility measure * Survival function * Universal integral Subject RIV: BA - General Mathematics OBOR OECD: Statistics and probability Impact factor: 2.845, year: 2016 http://library.utia.cas.cz/separaty/2017/E/mesiar-0477092.pdf

  14. Representation of potential information gain to measure the price of anarchy on ISR activities

    Science.gov (United States)

    Ortiz-Peña, Hector J.; Hirsch, Michael; Karwan, Mark; Nagi, Rakesh; Sudit, Moises

    2013-05-01

    One of the main technical challenges facing intelligence analysts today is effectively determining information gaps from huge amounts of collected data. Moreover, getting the right information to/from the right person (e.g., analyst, warfighter on the edge) at the right time in a distributed environment has been elusive to our military forces. Synchronization of Intelligence, Surveillance, and Reconnaissance (ISR) activities to maximize the efficient utilization of limited resources (both in quantity and capabilities) has become critically important to increase the accuracy and timeliness of overall information gain. Given this reality, we are interested in quantifying the degradation of solution quality (i.e., information gain) as a centralized system synchronizing ISR activities (from information gap identification to information collection and dissemination) moves to a more decentralized framework. This evaluation extends the concept of price of anarchy, a measure of the inefficiency of a system when agents maximize decisions without coordination, by considering different levels of decentralization. Our initial research representing the potential information gain in geospatial and time discretized spaces is presented. This potential information gain map can represent a consolidation of Intelligence Preparation of the Battlefield products as input to automated ISR synchronization tools. Using the coordination of unmanned vehicles (UxVs) as an example, we developed a mathematical programming model for multi-perspective optimization in which each UxV develops its own fight plan to support mission objectives based only on its perspective of the environment (i.e., potential information gain map). Information is only exchanged when UxVs are part of the same communication network.

  15. How to measure gain-sharing in an outsourcing relationship: a case study in information technology environment

    Directory of Open Access Journals (Sweden)

    Surendra Agrawal

    2005-08-01

    Full Text Available This study aims to approach the issue of gain-sharing measurement in an information technology outsourcing relationship as a component of remuneration policies for contracted services among companies. The methodology encompass three steps: (i bibliographical revision on outsourcing relationship in information technology environment and pricing in outsourcing decisions; (ii a case study in which the problem of gain-sharing measurement emerges in the relationship (providing information technology services between two large-scale international companies that operate in Brazilian credit card market; (iii discussion of the findings of the case study on basis of the revised literature. The contributions of the paper are: (i to identify the main issues related to outsourcing decisions and pricing in outsourcing relationship; (ii to present a description of the characteristics and behavior of costs in information technology environment; and (iii to provide an analysis and discussion about the method adopted by the companies for gain-sharing measurement. The bibliographical research showed a lack of literature regarding to the specific subject of gain-sharing measurement. The findings of the empirical study indicated that information technology companies are highly structured with fixed costs and that gain-sharing method adopted by studied companies corresponds to costs savings measured by cost-accounting concepts of price and efficiency cost variances according to budget parameters. In addiction, it was observed that the method adopted contributes to get more transparency and capability to analyze the business relationship by both receiver and provider companies.Este estudo tem o objetivo de analisar o problema da mensuração do gain-sharing na terceirização de serviços de tecnologia da informação como um componente da política de remuneração dos serviços contratados entre duas organizações. A metodologia adotada compõe-se de três passos

  16. Low-Cost and High-Gain SIW Circularly Polarized Circular-Horn-Loaded Antenna for Broadband Millimeter-Wave Applications

    Directory of Open Access Journals (Sweden)

    Ming Du

    2017-09-01

    Full Text Available A wideband, low-cost and high-gain circularly polarized (CP circular-horn-loaded antenna based on substrate integrated waveguide (SIW technology operating at Ka band is presented. The proposed antenna, which is built on a single-layer substrate, consists of five parts: a short-ended SIW, a centro-symmetric wide slot, an L-shaped probe, a circular horn and a transition from SIW to air-filled rectangular waveguide for measurement. The slot is etched on the upper ground of the SIW, while the L-shaped probe for generating CP wave is printed inside the slot and connected to the SIW. A circular horn is also loaded on the surface of the SIW slot for high gain. Then, the proposed antenna with a dimension of 45×45×24.16 mm3 was fabricated and measured. The measured results show that the antenna has a wide impedance matching bandwidth of 28.6% from 30 to 40 GHz for |S11| ≤10 dB and a wide axial ratio (AR bandwidth of 22.8% from 31.5 to 39.6 GHz for AR ≤ 3 dB. The measured maximum gain is 15.6 dBi at 36 GHz with slight fluctuations over the 30–40-GHz frequency range. This kind of antenna merits low cost and easy integration with common differential circuits at the same time.

  17. Effectiveness of Variable-Gain Kalman Filter Based on Angle Error Calculated from Acceleration Signals in Lower Limb Angle Measurement with Inertial Sensors

    Science.gov (United States)

    Watanabe, Takashi

    2013-01-01

    The wearable sensor system developed by our group, which measured lower limb angles using Kalman-filtering-based method, was suggested to be useful in evaluation of gait function for rehabilitation support. However, it was expected to reduce variations of measurement errors. In this paper, a variable-Kalman-gain method based on angle error that was calculated from acceleration signals was proposed to improve measurement accuracy. The proposed method was tested comparing to fixed-gain Kalman filter and a variable-Kalman-gain method that was based on acceleration magnitude used in previous studies. First, in angle measurement in treadmill walking, the proposed method measured lower limb angles with the highest measurement accuracy and improved significantly foot inclination angle measurement, while it improved slightly shank and thigh inclination angles. The variable-gain method based on acceleration magnitude was not effective for our Kalman filter system. Then, in angle measurement of a rigid body model, it was shown that the proposed method had measurement accuracy similar to or higher than results seen in other studies that used markers of camera-based motion measurement system fixing on a rigid plate together with a sensor or on the sensor directly. The proposed method was found to be effective in angle measurement with inertial sensors. PMID:24282442

  18. Integrating cell on chip—Novel waveguide platform employing ultra-long optical paths

    Directory of Open Access Journals (Sweden)

    Lena Simone Fohrmann

    2017-09-01

    Full Text Available Optical waveguides are the most fundamental building blocks of integrated optical circuits. They are extremely well understood, yet there is still room for surprises. Here, we introduce a novel 2D waveguide platform which affords a strong interaction of the evanescent tail of a guided optical wave with an external medium while only employing a very small geometrical footprint. The key feature of the platform is its ability to integrate the ultra-long path lengths by combining low propagation losses in a silicon slab with multiple reflections of the guided wave from photonic crystal (PhC mirrors. With a reflectivity of 99.1% of our tailored PhC-mirrors, we achieve interaction paths of 25 cm within an area of less than 10 mm2. This corresponds to 0.17 dB/cm effective propagation which is much lower than the state-of-the-art loss of approximately 1 dB/cm of single mode silicon channel waveguides. In contrast to conventional waveguides, our 2D-approach leads to a decay of the guided wave power only inversely proportional to the optical path length. This entirely different characteristic is the major advantage of the 2D integrating cell waveguide platform over the conventional channel waveguide concepts that obey the Beer-Lambert law.

  19. Integrating cell on chip—Novel waveguide platform employing ultra-long optical paths

    Science.gov (United States)

    Fohrmann, Lena Simone; Sommer, Gerrit; Pitruzzello, Giampaolo; Krauss, Thomas F.; Petrov, Alexander Yu.; Eich, Manfred

    2017-09-01

    Optical waveguides are the most fundamental building blocks of integrated optical circuits. They are extremely well understood, yet there is still room for surprises. Here, we introduce a novel 2D waveguide platform which affords a strong interaction of the evanescent tail of a guided optical wave with an external medium while only employing a very small geometrical footprint. The key feature of the platform is its ability to integrate the ultra-long path lengths by combining low propagation losses in a silicon slab with multiple reflections of the guided wave from photonic crystal (PhC) mirrors. With a reflectivity of 99.1% of our tailored PhC-mirrors, we achieve interaction paths of 25 cm within an area of less than 10 mm2. This corresponds to 0.17 dB/cm effective propagation which is much lower than the state-of-the-art loss of approximately 1 dB/cm of single mode silicon channel waveguides. In contrast to conventional waveguides, our 2D-approach leads to a decay of the guided wave power only inversely proportional to the optical path length. This entirely different characteristic is the major advantage of the 2D integrating cell waveguide platform over the conventional channel waveguide concepts that obey the Beer-Lambert law.

  20. Do inclusive work environments matter? Effects of community-integrated employment on quality of life for individuals with intellectual disabilities.

    Science.gov (United States)

    Blick, Rachel N; Litz, Katherine S; Thornhill, Monica G; Goreczny, Anthony J

    2016-01-01

    More individuals with an intellectual disability now possess prerequisite skills and supports necessary for successful work force integration than did previous generations. The current study compared quality of life of community-integrated workers with those participating in sheltered vocational workshops and adult day care programs. We considered numerous indices of quality of life, including inclusion and community participation; satisfaction within professional services, home life, and day activities; dignity, rights, and respect received from others; fear; choice and control; and family satisfaction. Our data revealed several important differences in quality of life across daytime activities; participants involved in community-integrated employment tended to be younger, indicated a greater sense of community integration, and reported more financial autonomy than did those who participated in adult day care programs and sheltered workshops. However, individuals reported no differences in overall satisfaction across daytime activities. We discuss generational differences across employment status as well as possible explanations to account for high levels of satisfaction across daytime activities. Copyright © 2016 Elsevier Ltd. All rights reserved.

  1. Generalized measures and the Feynman path integral

    International Nuclear Information System (INIS)

    Maslov, V.P.; Chebotarev, A.M.

    1976-01-01

    Generalizations are obtained for the earlier results by the authors concerning the inclusion of the Feynmann path integral in the momentum representation into the general integration theory. Feynmann path integrals are considered which do not represent T-products. Generalized Feynmann measure in the configuration representation is introduced

  2. Effect of multipulse waveform on gains of soft X-ray lines of lithium-like aluminum ions in recombining plasmas

    International Nuclear Information System (INIS)

    Okasaka, Kazunobu; Hara, Tamio; Yamaguchi, Naohiro; Ando, Kozo; Kawachi, Tetsuya; Oyama, Hitoshi

    2000-01-01

    Using the recombination plasma scheme, we investigated the amplified spontaneous emissions (ASE) from lithium-like aluminum plasmas produced by multipulse laser irradiation. Three types of multipulse waveforms of Nd-glass laser beam were treated. We measured the time-integrated intensities of the 3d-4f (15.5 nm) and the 3d-5f (10.6 nm) lines of lithium-like aluminum ions for 2.5-cm-long and 1.25-cm-long plasmas. The effective time-averaged gains estimated from these time-integrated intensities varied with the multipulse waveforms. using a hydrodynamic simulation, we discussed the time history of plasma parameters in the recombining plasma. We concluded that the modifying multipulse waveform contributed to the effective time-averaged gain by maintaining the helium-like ion density until the gain was generated. (author)

  3. Implication of fractionated dose exposures in therapeutic gain

    International Nuclear Information System (INIS)

    Kim, Hye-Jin; Lee, Min-Ho; Kim, Eun-Hee

    2016-01-01

    Radiation therapy pursues killing tumor cells while sparing normal cells from the radiation exposure. Stereotactic radiosurgery (SRS) is a cancer treatment modality that delivers a high dose in a single operation. This high-dose single operation shortens the treatment course, but can increase the risk of normal cell damage. Normal cell damage can be reduced by employing multi-directional exposures for an increasing number of isocenters. In this study, we investigated whether therapeutic benefits would be expected by employing new dose fractionation patterns at a high-dose single operation. The conventional single-dose operation in brain tumor radiosurgery is performed by delivering fractionated uniform doses. According to Figs. 2 and 3, the conventional radiosurgery might have obtained some therapeutic benefit by employing the fractionated uniform-dose exposures instead of a single-dose exposure. We suggest that further therapeutic gain be expected by employing the fractionated radiation exposures in an increasing dose pattern. Until ensuring our suggestion, the significance in gain of cell surviving should be verified for all three dose patterns with both normal and tumor cells. The investigation whether normal and tumor cells show the same responses to the fractionated dose exposures at lower and higher than 15 Gy of total dose is also reserved for future work

  4. Brain Gain am Beispiel Österreich

    Science.gov (United States)

    Aschbacher, Christine; Gejguš, Mirko; Sablik, Jozef

    2016-06-01

    BrainGain is a common trend within the last ten years in Europe and all-over the world. Managers, key players and scientists are allowed to choose wherever they want to work in the world. As there is a lack of qualified individuals for companies and universities, BrainGain has become a necessity, and mostly - the higher educated individuals are moving away according to a better offer elsewhere in the world. Therefore, a lot of expats are moving around with their families. Many times, the lack of integration at the current place, country or city, is the critical success factor for staying or leaving. Furthermore, if the family does not feel happy in the current location, then the manager or scientist will move away or return home and the investment will be lost. Moreover, many students have received a good education in a state university, however afterwards they have not secured a satisfactory job in the country where they have studied, therefore they are moving away to utilise their know-how. Measures to retain the know-how include a common placement and a welcome-culture in the country, and also exchanges on an international level.

  5. Commitment and the New Employment Relationship : Exploring a Forgotten Perspective: Employers Commitment

    NARCIS (Netherlands)

    Torka, Nicole; Looise, Jan Kees; van Riemsdijk, Maarten

    2005-01-01

    In this article, we have endeavoured to integrate the concept 'employers’ commitment' into the understanding of the new employment relationship. HRM scholars and practitioners assume that changes in (international) market and employee characteristics lead to a transformation of the employer-employee

  6. Integration of technology-based outcome measures in clinical trials of Parkinson and other neurodegenerative diseases.

    Science.gov (United States)

    Artusi, Carlo Alberto; Mishra, Murli; Latimer, Patricia; Vizcarra, Joaquin A; Lopiano, Leonardo; Maetzler, Walter; Merola, Aristide; Espay, Alberto J

    2018-01-01

    We sought to review the landscape of past, present, and future use of technology-based outcome measures (TOMs) in clinical trials of neurodegenerative disorders. We systematically reviewed PubMed and ClinicalTrials.gov for published and ongoing clinical trials in neurodegenerative disorders employing TOMs. In addition, medical directors of selected pharmaceutical companies were surveyed on their companies' ongoing efforts and future plans to integrate TOMs in clinical trials as primary, secondary, or exploratory endpoints. We identified 164 published clinical trials indexed in PubMed that used TOMs as outcome measures in Parkinson disease (n = 132) or other neurodegenerative disorders (n = 32). The ClinicalTrials.gov search yielded 42 clinical trials using TOMs, representing 2.7% of ongoing trials. Sensor-based technology accounted for over 75% of TOMs applied. Gait and physical activity were the most common targeted domains. Within the next 5 years, 83% of surveyed pharmaceutical companies engaged in neurodegenerative disorders plan to deploy TOMs in clinical trials. Although promising, TOMs are underutilized in clinical trials of neurodegenerative disorders. Validating relevant endpoints, standardizing measures and procedures, establishing a single platform for integration of data and algorithms from different devices, and facilitating regulatory approvals should advance TOMs integration into clinical trials. Copyright © 2017 Elsevier Ltd. All rights reserved.

  7. A J Integral Approach for Measuring Cohesive Laws Using a Modified DCB Sandwich Specimen

    DEFF Research Database (Denmark)

    Lundsgaard-Larsen, Christian; Berggreen, Christian; Sørensen, Bent F.

    2007-01-01

    mode mixities. The sandwich specimen consists of glass fiber faces and Divinycell H200 foam core. Arbitrary stiffening of the sandwich specimen with steel bars adhered to the faces reduces rotations and ensures that the method is useable for a wide range of materials. The J integral is employed...... and the opening of the pre-crack tip is recorded by a commercial digital photogrammetry measurement system. Cohesive laws are extracted by differentiating J with respect to the normal and tangential opening of the pre-crack tip. Some results are presented and discussed....

  8. Performance Analysis and Design Strategy for a Second-Order, Fixed-Gain, Position-Velocity-Measured (α-β-η-θ Tracking Filter

    Directory of Open Access Journals (Sweden)

    Kenshi Saho

    2017-07-01

    Full Text Available We present a strategy for designing an α - β - η - θ filter, a fixed-gain moving-object tracking filter using position and velocity measurements. First, performance indices and stability conditions for the filter are analytically derived. Then, an optimal gain design strategy using these results is proposed and its relationship to the position-velocity-measured (PVM Kalman filter is shown. Numerical analyses demonstrate the effectiveness of the proposed strategy, as well as a performance improvement over the traditional position-only-measured α - β filter. Moreover, we apply an α - β - η - θ filter designed using this strategy to ultra-wideband Doppler radar tracking in numerical simulations. We verify that the proposed strategy can easily design the gains for an α - β - η - θ filter based on the performance of the ultra-wideband Doppler radar and a rough approximation of the target’s acceleration. Moreover, its effectiveness in predicting the steady state performance in designing the position-velocity-measured Kalman filter is also demonstrated.

  9. 3D Inkjet Printed Helical Antenna with Integrated Lens

    KAUST Repository

    Farooqui, Muhammad Fahad

    2016-08-30

    The gain of an antenna can be enhanced through the integration of a lens, although this technique has traditionally been restricted to planar antennas due to fabrication limitations of standard manufacturing processes. Here, through a unique combination of 3D and 2D inkjet printing of dielectric and metallic inks respectively, we demonstrate a lens that has been monolithically integrated to a non-planar antenna (helix) for the first time. Antenna measurements show that the integration of a Fresnel lens enhances the gain of a 2-turn helix by around 4.6 dB, which provides a peak gain of about 12.9 dBi at 8.8 GHz. The 3-dB axial ratio (AR) bandwidth of the antenna with the lens is 5.5%. This work also reports the complete characterization of this new process in terms of minimum features sizes and achievable conductivities. Due to monolithic integration of the lens through a fully printed process, this antenna configuration offers high gain performance by using a low cost and rapid fabrication technique. © 2016 IEEE.

  10. Use of boron nitride for neutron spectrum characterization and cross-section validation in the epithermal range through integral activation measurements

    Science.gov (United States)

    Radulović, Vladimir; Trkov, Andrej; Jaćimović, Radojko; Gregoire, Gilles; Destouches, Christophe

    2016-12-01

    A recent experimental irradiation and measurement campaign using containers made from boron nitride (BN) at the Jožef Stefan Institute (JSI) TRIGA Mark II reactor in Ljubljana, Slovenia, has shown the applicability of BN for neutron spectrum characterization and cross-section validation in the epithermal range through integral activation measurements. The first part of the paper focuses on the determination of the transmission function of a BN container through Monte Carlo calculations and experimental measurements. The second part presents the process of tayloring the sensitivity of integral activation measurements to specific needs and a selection of suitable radiative capture reactions for neutron spectrum characterization in the epithermal range. A BN container used in our experiments and its qualitative effect on the neutron spectrum in the irradiation position employed is displayed in the Graphical abstract.

  11. Markowitz portfolio optimization model employing fuzzy measure

    Science.gov (United States)

    Ramli, Suhailywati; Jaaman, Saiful Hafizah

    2017-04-01

    Markowitz in 1952 introduced the mean-variance methodology for the portfolio selection problems. His pioneering research has shaped the portfolio risk-return model and become one of the most important research fields in modern finance. This paper extends the classical Markowitz's mean-variance portfolio selection model applying the fuzzy measure to determine the risk and return. In this paper, we apply the original mean-variance model as a benchmark, fuzzy mean-variance model with fuzzy return and the model with return are modeled by specific types of fuzzy number for comparison. The model with fuzzy approach gives better performance as compared to the mean-variance approach. The numerical examples are included to illustrate these models by employing Malaysian share market data.

  12. On FEL integral equation and electron energy loss in intermediate gain regime

    International Nuclear Information System (INIS)

    Takao, Masaru

    1994-03-01

    The FEL pendulum equation in a intermediate gain small signal regime is investigated. By calculating the energy loss of the electron beam in terms of the solution of the pendulum equation, we confirm the consistency of the FEL equation in intermediate gain regime. (author)

  13. Introduction to Measure Theory and Integration

    CERN Document Server

    Ambrosio, Luigi; Mennucci, Andrea

    2011-01-01

    This textbook collects the notes for an introductory course in measure theory and integration. The course was taught by the authors to undergraduate students of the Scuola Normale Superiore, in the years 2000-2011. The goal of the course was to present, in a quick but rigorous way, the modern point of view on measure theory and integration, putting Lebesgue's Euclidean space theory into a more general context and presenting the basic applications to Fourier series, calculus and real analysis. The text can also pave the way to more advanced courses in probability, stochastic processes or geomet

  14. Learn and gain

    CERN Document Server

    Al-Alami, Suhair Eyad Jamal

    2013-01-01

    Initiating the slogan ""love it, live it"", Learn and Gain includes eight short stories, chosen to illustrate various modes of narration, as well as to provoke reflection and discussion on a range of issues. All texts utilized here illustrate how great writers can, with their insight and gift for words, help us to see the world we live in, in new probing and exciting ways. What characterises the book, the author believes, is the integration of the skills of literary competence, communicative c...

  15. Mode division multiplexing over 19-cell hollow-core photonic bandgap fibre by employing integrated mode multiplexer

    NARCIS (Netherlands)

    Chen, H.; Uden, van R.G.H.; Okonkwo, C.M.; Jung, Y.; Wheeler, N.V.; Fokoua, E.N.; Baddela, N.; Petrovich, M.N.; Poletti, F.; Richardson, D.J.; Raz, O.; Waardt, de H.; Koonen, A.M.J.

    2014-01-01

    A photonic integrated mode coupler based on silicon-on-insulator is employed for mode division multiplexing (MDM) over a 193 m 19-cell hollow-core photonic bandgap fibre (HC-PBGF) with a -3 dB bandwidth >120 nm. Robust MDM transmissions using LP01 and LP11 modes, and two degenerate LP11 modes (LP11a

  16. A gateless charge integrator for Borexino energy measurement

    International Nuclear Information System (INIS)

    Lagomarsino, V.; Testera, G.

    1999-01-01

    A gateless charge integrator designed for the energy measurement in the Borexino experiment is described and the results of various tests performed on prototypes are shown. The circuit integrates always its input taking advantage of the AC coupling to the photomultipliers that equalizes to zero the charge associated with each event signal. A double sampling of the integrator output allows to perform a charge measurement in principle without dead time, avoiding the use of gate signals and baseline restoration networks and permitting a precise detection of the fast correlated events (delayed coincidences due to the decay of a nuclide producing a daughter having a lifetime in the tens of ns time range). The precision of the charge measurement is discussed together with the performances of the front end Borexino board where the integrator is mounted

  17. High peak-power kilohertz laser system employing single-stage multi-pass amplification

    Science.gov (United States)

    Shan, Bing; Wang, Chun; Chang, Zenghu

    2006-05-23

    The present invention describes a technique for achieving high peak power output in a laser employing single-stage, multi-pass amplification. High gain is achieved by employing a very small "seed" beam diameter in gain medium, and maintaining the small beam diameter for multiple high-gain pre-amplification passes through a pumped gain medium, then leading the beam out of the amplifier cavity, changing the beam diameter and sending it back to the amplifier cavity for additional, high-power amplification passes through the gain medium. In these power amplification passes, the beam diameter in gain medium is increased and carefully matched to the pump laser's beam diameter for high efficiency extraction of energy from the pumped gain medium. A method of "grooming" the beam by means of a far-field spatial filter in the process of changing the beam size within the single-stage amplifier is also described.

  18. The Employer Perspective on Sustainable Employability in the Construction Industry

    NARCIS (Netherlands)

    Tonnon, Susanne C; van der Veen, Rozan; Westerman, Marjan J; Robroek, Suzan J W; van der Ploeg, Hidde P; Van Der Beek, Allard J.; Proper, Karin I.

    OBJECTIVE: To determine the measures employers in the construction industry take to promote sustainable employability, the barriers and facilitators that influence implementation and employer needs. METHODS: Questionnaire among 499 employers and interviews with 17 employers. RESULTS: Employers

  19. Transient optical gain in germanium quantum wells

    Energy Technology Data Exchange (ETDEWEB)

    Chatterjee, Sangam; Lange, Christoph; Koester, Niko S.; Schaefer, Martin; Kira, Mackillo; Koch, Stephan W. [Faculty of Physics and Materials Sciences Center, Philipps-Universitaet Marburg (Germany); Chrastina, Daniel; Isella, Giovanni; Kaenel, Hans von [CNISM, Como (Italy); L-NESS, Dipartimento di Fisica del Politecnico di Milano, Como (Italy); Sigg, Hans [Laboratory for Micro and Nanotecnology, Paul Scherrer Institut, Villigen PSI (Switzerland)

    2010-07-01

    One of today's most-sought goals in semiconductor technology is the monolithic integration of microelectronics and photonics on Si. Optical gain is, in general, not expected for Si and Ge or its alloys due to the indirect nature of the band gap in this material system. Here, we show that Ge/SiGe QWs show transient optical gain and may thus be used as an optically-pumped amplifier at room temperature. Further, the nonequilibrium effects which govern the relaxation dynamics of the optically injected carrier distributions in this material were observed and analyzed using a microscopic many-body theory. Strong non-equilibrium gain was obtained on a sub-100 fs time scale. Long-lived gain arising from {gamma}-point transitions is overcompensated by a process bearing the character of free carrier absorption.

  20. Employment and Training for America's Homeless: Best Practices Guide.

    Science.gov (United States)

    Beck, Susan Kessler; Trutko, John W.; Isbell, Kellie; Rothstein, Frances; Barnow, Burt S.

    This document is a how-to guide to help employment and training agencies tailor their delivery systems to be more effective in training, placing, and retaining homeless individuals in gainful employment. The guide is written from the perspective of an employment and training agency and based largely on the experiences of 63 organizations from…

  1. Gain scheduling using the Youla parameterization

    DEFF Research Database (Denmark)

    Niemann, Hans Henrik; Stoustrup, Jakob

    1999-01-01

    Gain scheduling controllers are considered in this paper. The gain scheduling problem where the scheduling parameter vector cannot be measured directly, but needs to be estimated is considered. An estimation of the scheduling vector has been derived by using the Youla parameterization. The use...... in connection with H_inf gain scheduling controllers....

  2. Measuring cross-border regional STI integration

    Energy Technology Data Exchange (ETDEWEB)

    Makkonen, T

    2016-07-01

    Earlier quantitative studies on cross-border regional integration processes have commonly neglected science, technology and innovation (STI) indicators: even the most notable example of a composite indicator approach to measuring cross-border regional integration, i.e. the Oresund index, lacks a sub-category for STI. Consequently, by ignoring cross-border innovation and knowledge flows, the Oresund integration index fails to take into account one of the most important drivers of economic growth in cross-border regions. Therefore, a new composite STI indicator (sub-category) was introduced to strengthen the Oresund integration index. This was compiled from patent, publication and collaborative R&D project data. The findings show that this index performs reasonably well in depicting STI integration, while at the same time remaining simple and straightforward enough to be adopted in other crossborder regions. (Author)

  3. Clinical and cognitive correlates of employment among patients with schizophrenia: a cross-sectional study in Malaysia

    Directory of Open Access Journals (Sweden)

    Radzi Rozhan SM

    2011-05-01

    Full Text Available Abstract Background Gainful employment is one major area of functioning which is becoming an important goal in psychiatric rehabilitation of patients with schizophrenia. Studies in western countries are pointing to evidence that certain sociodemographic and clinical factors may contribute to employment outcomes in this group of people. However, the area is still largely unexplored in Malaysia. The aim of this study was to examine the sociodemographic, clinical and cognitive correlates of employment status among patients with Schizophrenia. Methods This was a cross-sectional study. All participants who fulfilled the requirements of the study according to the inclusion and exclusion criteria were enrolled. Study instruments included a demographic data questionnaire, Positive and Negative Symptom Scale (PANSS, Trail Making Tests, Rey's Auditory Verbal Learning Test (RAVLT and Digit Span. Bivariate analyses were done using chi-square for categorical data and t-test for continuous data and multiple logistic regression analysis was done to identify predictors of employment status. Results A total of 95 participants who fulfilled the inclusion criteria were enrolled into the study. Among the sociodemographic, clinical and cognitive variables studied marital status, educational level, mean scores of negative symptoms, Digit Span and RAVLT and Trail Making Tests were found to show significant association with employment status on bivariate analyses. However, when entered into a logistic regression model, only cognitive variables ie. Trail A and B, Digit Span and RAVLT were significant predictors of employment status. Conclusions The results from this study support the role of cognitive function, particularly, attention, working memory and executive functioning on attaining and maintaining employment in persons with schizophrenia as measured by the RAVLT, Digit Span and Trail Making Tests. These findings may act as preliminary evidence suggesting the

  4. [Can informal employment be compared in South America? Analysis of its definition, measurement and classification].

    Science.gov (United States)

    Ruiz, Marisol E; Tarafa Orpinell, Gemma; Jódar Martínez, Pere; Benach, Joan

    2015-01-01

    To characterize and analyze the situation of informal employment with regard to its definition, measurement and classification in South American countries. A literature review was conducted from four databases and grey literature through a scoping review, which included reports from international organizations and from the 12 countries in South America. The data were analyzed by evaluating content and establishing similarities among countries. The data reviewed showed a disparity in the definitions used, although many countries define informal employment as workers with no contract. Most countries measured informal employment through household surveys, but due to the differences in classifications, the information found was heterogeneous, with little standardization among registries. Therefore, the data could not be compared at a regional level. The definition of the International Labour Organization was not useful to study informal employment in the countries studied. The definition should include protected and unprotected workers. An appropriate and specific definition of informal employment would allow nuances to be studied within the concept, revealing the loopholes faced by most of the population working informally. The key to meaningful comparisons within the study region is to incorporate common indicators among local registration systems (measurement) in order to determine the public health impact in the informally employed population. Copyright © 2014 SESPAS. Published by Elsevier Espana. All rights reserved.

  5. [Employment during pregnancy and neonatal morbidity].

    Science.gov (United States)

    Fricker, H S; Bruppacher, R

    1984-01-01

    Neonatal morbidity was higher among the babies of 521 women who were gainfully employed during pregnancy compared to those of 475 non working women of the same area (Aarau, Switzerland). The difference was lower (6%) in the part time employed than in those working full time (11%.) It was almost entirely due to the higher number of primiparae and of smokers among those women who were working during pregnancy.

  6. Determination of the STIS CCD Gain

    Science.gov (United States)

    Riley, Allyssa; Monroe, TalaWanda; Lockwood, Sean

    2016-09-01

    This report summarizes the analysis and absolute gain results of the STIS Cycle 23 special calibration program 14424 that was designed to measure the gain of amplifiers A, C and D at nominal gain settings of 1 and 4 e-/DN. We used the mean-variance technique and the results indicate a mean-variance technique.

  7. Integrating ergonomic knowledge into engineering design processes

    DEFF Research Database (Denmark)

    Hall-Andersen, Lene Bjerg

    Integrating ergonomic knowledge into engineering design processes has been shown to contribute to healthy and effective designs of workplaces. However, it is also well-recognized that, in practice, ergonomists often have difficulties gaining access to and impacting engineering design processes...... employed in the same company, constituted a supporting factor for the possibilities to integrate ergonomic knowledge into the engineering design processes. However, the integration activities remained discrete and only happened in some of the design projects. A major barrier was related to the business...... to the ergonomic ambitions of the clients. The ergonomists’ ability to navigate, act strategically, and compromise on ergonomic inputs is also important in relation to having an impact in the engineering design processes. Familiarity with the engineering design terminology and the setup of design projects seems...

  8. Measurement of population inversions and gain in carbon fiber plasmas

    International Nuclear Information System (INIS)

    Milchberg, H.; Skinner, C.H.; Suckewer, S.; Voorhees, D.

    1985-10-01

    A CO 2 laser (approx.0.5 kJ energy, 70 nsec pulse width) was focussed onto the end of an axially oriented, thick (35 to 350 μ) carbon fiber with or without a magnetic field present along the laser-fiber axis. We present evidence for axial-to-transverse enhancement of the CVI 182A (n = 3 → 2) transition, which is correlated with the appearance of a population inversion between levels n = 3 and 2. For the B = 0 kG, zero field case, the maximum gain-length product of kl approx. =3 (k approx. =6 cm -1 ) was measured for a carbon fiber coated with a thin layer of aluminum (for additional radiation cooling). The results are interpreted in terms of fast recombination due mostly to thermal conduction from the plasma to the cold fiber core

  9. Integrating Fieldwork into Employment Counseling for Methadone-Treatment Patients

    Science.gov (United States)

    Blankertz, Laura; Spinelli, Michael; Magura, Stephen; Bali, Priti; Madison, Elizabeth M.; Staines, Graham L.; Horowitz, Emily; Guarino, Honoria; Grandy, Audrey; Fong, Chunki; Gomez, Augustin; Dimun, Amy; Friedman, Ellen

    2005-01-01

    An innovative employment counseling model, Customized Employment Supports, was developed for methadone-treatment patients, a population with historically low employment rates. The effectiveness of a key component of the model, "vocational fieldwork," the delivery of services in the community rather than only within the clinic, was assessed through…

  10. Two integrator loop quadrature oscillators: A review

    Directory of Open Access Journals (Sweden)

    Ahmed M. Soliman

    2013-01-01

    Full Text Available A review of the two integrator loop oscillator circuits providing two quadrature sinusoidal output voltages is given. All the circuits considered employ the minimum number of capacitors namely two except one circuit which uses three capacitors. The circuits considered are classified to four different classes. The first class includes floating capacitors and floating resistors and the active building blocks realizing these circuits are the Op Amp or the OTRA. The second class employs grounded capacitors and includes floating resistors and the active building blocks realizing these circuits are the DCVC or the unity gain cells or the CFOA. The third class employs grounded capacitors and grounded resistors and the active building blocks realizing these circuits are the CCII. The fourth class employs grounded capacitors and no resistors and the active building blocks realizing these circuits are the TA. Transformation methods showing the generation of different classes from each other is given in details and this is one of the main objectives of this paper.

  11. Is there an occupational therapy employment crisis within Australia? An investigation into two consecutive cohorts of occupational therapy graduates from a single Victorian University identifying trends in employment.

    Science.gov (United States)

    Fay, Pearse; Adamson, Lynne

    2017-12-01

    Within the context of growing concerns about a potential oversupply of occupational therapist, this research examines when, where and how long new graduates take to gain employment and identifies influences upon the health and university systems. A mixed method research design, using an online survey was adopted to investigate the topic. Two consecutive cohorts of graduates from a single university program were invited to participate. Seventy-five (58%) responses were received, with 63 (84%) currently employed in an occupational therapy role. Of the 12 (16%) not employed, only 3 (4%) described themselves as actively seeking employment in an occupational therapy role. A wide spread of employment settings and scope of practice areas was reported. Findings suggest that occupational therapy graduates are gaining employment in a range of settings and practice areas, relatively quickly. This research adds evidence to the conversation around graduate employment within a region of Australia. The Australian population, health system and university changes are possible factors influencing employment. The research reveals the difficulties in understanding the current situation with limitations in data collected, varied terminology and an ever changing job seeking environment. The research provides a starting point for the occupational therapy profession to further understand the directions the profession is taking. University programs may also benefit by using the research to tailor course content to assist graduates in gaining employment or to present students with the prospects of new employment opportunities. © 2017 Occupational Therapy Australia.

  12. Fluorescence-enhanced optical imaging in large tissue volumes using a gain-modulated ICCD camera

    International Nuclear Information System (INIS)

    Godavarty, Anuradha; Eppstein, Margaret J; Zhang, Chaoyang; Theru, Sangeeta; Thompson, Alan B; Gurfinkel, Michael; Sevick-Muraca, Eva M

    2003-01-01

    A novel image-intensified charge-coupled device (ICCD) imaging system has been developed to perform 3D fluorescence tomographic imaging in the frequency-domain using near-infrared contrast agents. The imager is unique since it (i) employs a large tissue-mimicking phantom, which is shaped and sized to resemble a female breast and part of the extended chest-wall region, and (ii) enables rapid data acquisition in the frequency-domain by using a gain-modulated ICCD camera. Diffusion model predictions are compared to experimental measurements using two different referencing schemes under two different experimental conditions of perfect and imperfect uptake of fluorescent agent into a target. From these experimental measurements, three-dimensional images of fluorescent absorption were reconstructed using a computationally efficient variant of the approximate extended Kalman filter algorithm. The current work represents the first time that 3D fluorescence-enhanced optical tomographic reconstructions have been achieved from experimental measurements of the time-dependent light propagation on a clinically relevant breast-shaped tissue phantom using a gain-modulated ICCD camera

  13. Charge Gain, Voltage Gain, and Node Capacitance of the SAPHIRA Detector Pixel by Pixel

    Science.gov (United States)

    Pastrana, Izabella M.; Hall, Donald N. B.; Baker, Ian M.; Jacobson, Shane M.; Goebel, Sean B.

    2018-01-01

    The University of Hawai`i Institute for Astronomy has partnered with Leonardo (formerly Selex) in the development of HgCdTe linear mode avalanche photodiode (L-APD) SAPHIRA detectors. The SAPHIRA (Selex Avalanche Photodiode High-speed Infra-Red Array) is ideally suited for photon-starved astronomical observations, particularly near infrared (NIR) adaptive optics (AO) wave-front sensing. I have measured the stability, and linearity with current, of a 1.7-um (10% spectral bandpass) infrared light emitting diode (IR LED) used to illuminate the SAPHIRA and have then utilized this source to determine the charge gain (in e-/ADU), voltage gain (in uV/ADU), and node capacitance (in fF) for each pixel of the 320x256@24um SAPHIRA. These have previously only been averages over some sub-array. Determined from the ratio of the temporal averaged signal level to variance under constant 1.7-um LED illumination, I present the charge gain pixel-by-pixel in a 64x64 sub-array at the center of the active area of the SAPHIRA (analyzed separately as four 32x32 sub-arrays) to be about 1.6 e-/ADU (σ=0.5 e-/ADU). Additionally, the standard technique of varying the pixel reset voltage (PRV) in 10 mV increments and recording output frames for the same 64x64 subarray found the voltage gain per pixel to be about 11.7 uV/ADU (σ=0.2 uV/ADU). Finally, node capacitance was found to be approximately 23 fF (σ=6 fF) utilizing the aforementioned charge and voltage gain measurements. I further discuss the linearity measurements of the 1.7-um LED used in the charge gain characterization procedure.

  14. High Voltage Coil Current Sensor for DC-DC Converters Employing DDCC

    Directory of Open Access Journals (Sweden)

    M. Drinovsky

    2015-12-01

    Full Text Available Current sensor is an integral part of every switching converter. It is used for over-current protection, regulation and in case of multiphase converters for balancing. A new high voltage current sensor for coil-based current sensing in DC-DC converters is presented. The sensor employs DDCC with high voltage input stage and gain trimming. The circuit has been simulated and implemented in 0.35 um BCD technology as part of a multiphase DC-DC converter where its function has been verified. The circuit is able to sustain common mode voltage on the input up to 40 V, it occupies 0.387*0.345 mm2 and consumes 3.2 mW typically.

  15. Education for Employment in Nigeria in the 21st Century: Some ...

    African Journals Online (AJOL)

    This paper examined education for employment in Nigeria in the 21st Century. This paper therefore looked at the demand of workplace employment skills, learning skills, literacy skills and life skills. This paper concludes by advocating how to teach 21st Century employment skills, how to guarantee gainful employment, and ...

  16. Employment gains and wage declines: the erosion of black women's relative wages since 1980.

    Science.gov (United States)

    Pettit, Becky; Ewert, Stephanie

    2009-08-01

    Public policy initiatives in the 1950s and 1960s, including Affirmative Action and Equal Employment Opportunity law, helped mitigate explicit discrimination in pay, and the expansion of higher education and training programs have advanced the employment fortunes of many American women. By the early 1980s, some scholars proclaimed near equity in pay between black and white women, particularly among young and highly skilled workers. More recent policy initiatives and labor market conditions have been arguably less progressive for black women's employment and earnings: through the 1980s, 1990s, and the first half of the 2000s, the wage gap between black and white women widened considerably. Using data from the Current Population Survey Merged Outgoing Rotation Group (CPS-MORG), this article documents the racial wage gap among women in the United States from 1979 to 2005. We investigate how demographic and labor market conditions influence employment and wage inequality among black and white women over the period. Although shifts in labor supply influence the magnitude of the black-white wage gap among women, structural disadvantages faced by black women help explain the growth in the racial wage gap.

  17. Gain attenuation of gated framing camera

    International Nuclear Information System (INIS)

    Xiao Shali; Liu Shenye; Cao Zhurong; Li Hang; Zhang Haiying; Yuan Zheng; Wang Liwei

    2009-01-01

    The theoretic model of framing camera's gain attenuation is analyzed. The exponential attenuation curve of the gain along the pulse propagation time is simulated. An experiment to measure the coefficient of gain attenuation based on the gain attenuation theory is designed. Experiment result shows that the gain follows an exponential attenuation rule with a quotient of 0.0249 nm -1 , the attenuation coefficient of the pulse is 0.00356 mm -1 . The loss of the pulse propagation along the MCP stripline is the leading reason of gain attenuation. But in the figure of a single stripline, the gain dose not follow the rule of exponential attenuation completely, instead, there is a gain increase at the stripline bottom. That is caused by the reflection of the pulse. The reflectance is about 24.2%. Combining the experiment and theory, which design of the stripline MCP can improved the gain attenuation. (authors)

  18. A Wide-Band High-Gain Compact SIS Receiver Utilizing a 300-μW SiGe IF LNA

    Science.gov (United States)

    Montazeri, Shirin; Grimes, Paul K.; Tong, Cheuk-Yu Edward; Bardin, Joseph C.

    2017-06-01

    Low-power low-noise amplifiers integrated with superconductor-insulator-superconductor (SIS) mixers are required to enable implementation of large-scale focal plane arrays. In this work, a 220-GHz SIS mixer has been integrated with a high-gain broad-band low-power IF amplifier into a compact receiver module. The low noise amplifier (LNA) was specifically designed to match to the SIS output impedance and contributes less than 7 K to the system noise temperature over the 4-8 GHz IF frequency range. A receiver noise temperature of 30-45 K was measured for a local oscillator frequency of 220 GHz over an IF spanning 4-8 GHz. The LNA power dissipation was only 300-μW. To the best of the authors' knowledge, this is the lowest power consumption reported for a high-gain wide-band LNA directly integrated with an SIS mixer.

  19. Indicators and Measurement Tools for Health Systems Integration: A Knowledge Synthesis

    Directory of Open Access Journals (Sweden)

    Esther Suter

    2017-11-01

    Full Text Available Background: Despite far reaching support for integrated care, conceptualizing and measuring integrated care remains challenging. This knowledge synthesis aimed to identify indicator domains and tools to measure progress towards integrated care. Methods: We used an established framework and a Delphi survey with integration experts to identify relevant measurement domains. For each domain, we searched and reviewed the literature for relevant tools. Findings: From 7,133 abstracts, we retrieved 114 unique tools. We found many quality tools to measure care coordination, patient engagement and team effectiveness/performance. In contrast, there were few tools in the domains of performance measurement and information systems, alignment of organizational goals and resource allocation. The search yielded 12 tools that measure overall integration or three or more indicator domains. Discussion: Our findings highlight a continued gap in tools to measure foundational components that support integrated care. In the absence of such targeted tools, “overall integration” tools may be useful for a broad assessment of the overall state of a system. Conclusions: Continued progress towards integrated care depends on our ability to evaluate the success of strategies across different levels and context. This study has identified 114 tools that measure integrated care across 16 domains, supporting efforts towards a unified measurement framework.

  20. Indicators and Measurement Tools for Health Systems Integration: A Knowledge Synthesis

    Science.gov (United States)

    Oelke, Nelly D.; da Silva Lima, Maria Alice Dias; Stiphout, Michelle; Janke, Robert; Witt, Regina Rigatto; Van Vliet-Brown, Cheryl; Schill, Kaela; Rostami, Mahnoush; Hepp, Shelanne; Birney, Arden; Al-Roubaiai, Fatima; Marques, Giselda Quintana

    2017-01-01

    Background: Despite far reaching support for integrated care, conceptualizing and measuring integrated care remains challenging. This knowledge synthesis aimed to identify indicator domains and tools to measure progress towards integrated care. Methods: We used an established framework and a Delphi survey with integration experts to identify relevant measurement domains. For each domain, we searched and reviewed the literature for relevant tools. Findings: From 7,133 abstracts, we retrieved 114 unique tools. We found many quality tools to measure care coordination, patient engagement and team effectiveness/performance. In contrast, there were few tools in the domains of performance measurement and information systems, alignment of organizational goals and resource allocation. The search yielded 12 tools that measure overall integration or three or more indicator domains. Discussion: Our findings highlight a continued gap in tools to measure foundational components that support integrated care. In the absence of such targeted tools, “overall integration” tools may be useful for a broad assessment of the overall state of a system. Conclusions: Continued progress towards integrated care depends on our ability to evaluate the success of strategies across different levels and context. This study has identified 114 tools that measure integrated care across 16 domains, supporting efforts towards a unified measurement framework. PMID:29588637

  1. Towards an interpretive measurement framework to assess the levels of integrated and integrative thinking within organisations

    Directory of Open Access Journals (Sweden)

    Daniel Schörger

    2015-07-01

    Full Text Available This research study is located within the context of corporate reporting and is relevant for the agenda of sustainability and sustainable development. The specific context for this study is the South African mining industry, within which three units in the form of three companies, were chosen to provide a coherent case for this study. The sample for the analysis is based on the integrated reports of these companies for the years 2012 and 2013. This gives this research a total sample size of six reports. Based on the research findings an initial interpretive measurement framework to assess the levels of capital integration has been theorised which enables the various stakeholders of an organisation to assess the integrated and integrative thinking capabilities. The level of integration is represented as a maturity scale on which integrated thinking is associated with the lower levels, while integrative thinking is attributed to higher levels of maturity. In the elaborated framework, integrated thinking is perceived as being a prerequisite for integrative thinking. The practical implication of this study is that it provides a potential measurement framework for various organisational stakeholders, including investors, to assess the thinking capabilities that are more likely to lead to long term financial stability and sustainability. The value of this research study is that it provides an initial step towards measuring the level of integrated and integrative thinking capabilities within organisations where no such measurement framework currently exists. The limitations and implications of this research study are that the interpretive measurement framework represents merely an initial step and an ongoing working hypothesis which requires further research to develop its maturity and usefulness.

  2. Weight Suppression But Not Symptom Improvement Predicts Weight Gain During Inpatient Treatment for Bulimia Nervosa.

    Science.gov (United States)

    Hessler, Johannes Baltasar; Diedrich, Alice; Greetfeld, Martin; Schlegl, Sandra; Schwartz, Caroline; Voderholzer, Ulrich

    2018-03-01

    Fear of gaining weight is a common obstacle to seeking treatment for bulimia nervosa (BN). We investigated changes in body mass index (BMI) during inpatient treatment for BN in relation to treatment outcome and weight suppression (WS). Female inpatients of a specialized eating disorders clinic were grouped as deteriorated/unchanged, reliably improved, and clinically significantly improved based on Eating Disorder Inventory-2 scores. Repeated measures ANOVA was employed to examine changes in BMI between admission and discharge depending on treatment outcome and WS. One-hundred seventy-nine patients were included. Overall, the average BMI significantly increased by 0.54 kg/m 2 (SD = 1.24). Repeated measures ANOVA revealed no association of change in BMI with treatment outcome [F(df) = 1.13 (2166), p = 0.327] but with WS [F(df) = 2.76 (3166), p Bulimia nervosa can be successfully treated without causing excessive weight gain. Patients with higher WS might expect somewhat more weight gain. Copyright © 2017 John Wiley & Sons, Ltd and Eating Disorders Association. Copyright © 2017 John Wiley & Sons, Ltd and Eating Disorders Association.

  3. Measurement of circulating 1,25-dihydroxyvitamin D employing radioimmunoassay

    International Nuclear Information System (INIS)

    Yamamoto, Itsuo; Hamazu, Hisatoshi; Kigami, Yuusuke; Morita, Rikushi

    1997-01-01

    Measurement of serum 1,25-dihydroxyvitamin D levels is important for diagnosis of various calcium metabolism disorders. Conventional assays for 1,25-dihydroxyvitamin D employed specific 1,25-dihydroxyvitamin D receptor as binding site for the ligand and thus, biologically active 1,25-dihydroxyvitamin D ligand, which is labeled with 3 H, was required. Usage of 3 H made assays cumbersome works. A new assay which uses specific antibody as the binding site and the radioligand labeled with 125 I is now available as a commercial kit. Using these kits, we first studied basically the reproducibility, recovery, cross-reactivity and comparison with conventional assays. All of those results were satisfactory. Secondly, we measured clinically in 111 healthy adults and in patients with various disorders such as renal failure, primary hyperparathyroidism, hypoparathyroidism and sarcoidosis. This newly available kit for measurement of circulating 1,25-dihydroxyvitamin D is proved to be useful in clinical evaluation of calcium metabolic disorders. (author)

  4. Comparison of Video Head Impulse Test (vHIT) Gains Between Two Commercially Available Devices and by Different Gain Analytical Methods.

    Science.gov (United States)

    Lee, Sang Hun; Yoo, Myung Hoon; Park, Jun Woo; Kang, Byung Chul; Yang, Chan Joo; Kang, Woo Suk; Ahn, Joong Ho; Chung, Jong Woo; Park, Hong Ju

    2018-06-01

    To evaluate whether video head impulse test (vHIT) gains are dependent on the measuring device and method of analysis. Prospective study. vHIT was performed in 25 healthy subjects using two devices simultaneously. vHIT gains were compared between these instruments and using five different methods of comparing position and velocity gains during head movement intervals. The two devices produced different vHIT gain results with the same method of analysis. There were also significant differences in the vHIT gains measured using different analytical methods. The gain analytic method that compares the areas under the velocity curve (AUC) of the head and eye movements during head movements showed lower vHIT gains than a method that compared the peak velocities of the head and eye movements. The former method produced the vHIT gain with the smallest standard deviation among the five procedures tested in this study. vHIT gains differ in normal subjects depending on the device and method of analysis used, suggesting that it is advisable for each device to have its own normal values. Gain calculations that compare the AUC of the head and eye movements during the head movements show the smallest variance.

  5. An Analysis Nomoto Gain and Norbin Parameter on Ship Turning Maneuver

    Directory of Open Access Journals (Sweden)

    Aulia Siti Aisjah

    2010-05-01

    Full Text Available First order approach of maneuvering ship model developed by Nomoto, that has commonly underpinned researchers on mathematical models of ship maneuvering, is employed by the present research in order to describe the results of Nomoto validation gain value from some type of ships. In this present study, the controls are designated using FLC, while the rules are derived from FLC; furthermore, the reference is the LQG/LTR. On the other pole, Norbin parameters are obtained under the bases of the gain and time constant output control response. Validation of Nomoto gain value is obtained through the calculation of the value of a constant gain, settling time of the first order response, and approach value toward damping ratio and natural frequency response of the system used to control the output of the second order pattern. Validation is employed on 20 types of ships with a length between 40-350 meters; as a result, it is figured out that at the Low Speed General Cargo ship, Mariner, RO/RO, and Barge Carrier have good maneuverability compared to the other 17 types of ships.

  6. Nondestructive measurement systems for the characterization of ancient masonry: an SLDV/GPR integrated approach

    Science.gov (United States)

    Agnani, Alexia; del Conte, Antonio; Esposito, Enrico; Naticchia, Berardo

    2006-06-01

    The determination of the state of conservation of historical masonries by non-destructive and non-invasive techniques must still gain its due widespread use, and this is clearly reflected in national norms that often refuse them as not being reliable enough to be used without the support of destructive ones (see for example the Italian OPCM 3274/2003 and subsequent modifications). Anyhow, the clear advantages of such techniques, and especially laser based ones like the Scanning Laser Doppler Vibrometry - SLDV here employed, drive the research towards this direction. In this work we will illustrate a case study done in the south of the Marche region, namely the investigations conducted inside and outside the Lanciano castle, near Castelraimondo (MC). A series of SLDV measurements have been made that have lead to the discovery of many hidden structural defects, such as delaminations of superficial layers, minor and also important cracks. To validate our findings a well reputed and consolidated technique has been employed, a Ground Penetrating Radar - GPR, along with manual beating of suspected areas. Also a brief session using an infrared camera has been conducted to check the results relative to superficial delaminations, where the GPR could fail due to insufficient spatial resolution.

  7. Real analysis measure theory, integration, and Hilbert spaces

    CERN Document Server

    Stein, Elias M

    2005-01-01

    Real Analysis is the third volume in the Princeton Lectures in Analysis, a series of four textbooks that aim to present, in an integrated manner, the core areas of analysis. Here the focus is on the development of measure and integration theory, differentiation and integration, Hilbert spaces, and Hausdorff measure and fractals. This book reflects the objective of the series as a whole: to make plain the organic unity that exists between the various parts of the subject, and to illustrate the wide applicability of ideas of analysis to other fields of mathematics and science. After

  8. Financial integration in the European Union. Measurement and determination

    NARCIS (Netherlands)

    Lemmen, J.J.G.

    1996-01-01

    The first part of this study addresses the measurement of financial integration in the European Union (EU). First, we present empirical evidence on the degree of financial integration as measured with interest parity conditions. Second, the study applies an error-correction model of

  9. Time-Lapse Measurement of Wellbore Integrity

    Science.gov (United States)

    Duguid, A.

    2017-12-01

    Well integrity is becoming more important as wells are used longer or repurposed. For CO2, shale gas, and other projects it has become apparent that wells represent the most likely unintended migration pathway for fluids out of the reservoir. Comprehensive logging programs have been employed to determine the condition of legacy wells in North America. These studies provide examples of assessment technologies. Logging programs have included pulsed neutron logging, ultrasonic well mapping, and cement bond logging. While these studies provide examples of what can be measured, they have only conducted a single round of logging and cannot show if the well has changed over time. Recent experience with time-lapse logging of three monitoring wells at a US Department of Energy sponsored CO2 project has shown the full value of similar tools. Time-lapse logging has shown that well integrity changes over time can be identified. It has also shown that the inclusion of and location of monitoring technologies in the well and the choice of construction materials must be carefully considered. Two of the wells were approximately eight years old at the time of study; they were constructed with steel and fiberglass casing sections and had lines on the outside of the casing running to the surface. The third well was 68 years old when it was studied and was originally constructed as a production well. Repeat logs were collected six or eight years after initial logging. Time-lapse logging showed the evolution of the wells. The results identified locations where cement degraded over time and locations that showed little change. The ultrasonic well maps show clearly that the lines used to connect the monitoring technology to the surface are visible and have a local effect on cement isolation. Testing and sampling was conducted along with logging. It provided insight into changes identified in the time-lapse log results. Point permeability testing was used to provide an in-situ point

  10. Structural Integrity in Measures of Self Concept.

    Science.gov (United States)

    Stenner, A. Jackson; Katzenmeyer, W.G.

    Structural integrity of a measure is defined in terms of its replicability, constancy, invariance, and stability. Work completed in the development and validation of the Self Observation Scales (SOS) Primary Level (Stenner and Katzenmeyer, 1973) serves to illustrate one method of establishing structural integrity. The name of each scale of the SOS…

  11. Changes in job strain and subsequent weight gain

    DEFF Research Database (Denmark)

    Vesterlund, Gitte Kingo; Keller, Amélie Cléo; Heitmann, Berit Lilienthal

    2018-01-01

    in 1999 between those who were rarely v. sometimes v. often busy in 1993 (P=0·03), with the largest weight gain in individuals with sustained high busyness in both years. Loss of influence between 1993 and 1999 was associated with larger subsequent weight gain than sustained high influence (P=0......Objective: Obesity as well as job strain is increasing, and job strain might contribute to weight gain. The objective of the current study was to examine associations between longitudinal alterations in the components of job strain and subsequent weight gain. Design: The study was designed...... as a prospective cohort study with three questionnaire surveys enabling measurement of job-strain alterations over 6 years and subsequent measurements of weight gain after further 10 years of follow-up. ANCOVA and trend analyses were conducted. Job demands were measured as job busyness and speed, and control...

  12. Integrating institutional bribery and behavioral measures of bribery

    OpenAIRE

    Rose, Richard; Peiffer, Caryn

    2016-01-01

    Bribery involves individuals exchanging material benefits for a service of a public institution. To understand the process of bribery we need to integrate measures of individual behaviour and institutional attributes rather than rely exclusively on surveys of individual perceptions and experience or macro-level corruption indexes of national institutions. This paper integrates institutional and behavioural measures to show that where you live and who you are have independent influence on whet...

  13. Design and development of a cross-European employability training for older jobseekers

    NARCIS (Netherlands)

    Janssen, José; Hale, Hilary; Sanders, Val; Boon, Jo; Van der Klink, Marcel; Stoyanov, Slavi

    2015-01-01

    The importance of social networking for effective job-search has been clearly established in various studies. Social networks (social capital) represent a constituent component of employability: the potential of an individual to gain employment and to stay employed. However, not everyone feels

  14. Energy Gaining Windows for Residental Buildings

    DEFF Research Database (Denmark)

    Kragh, Jesper; Laustsen, Jacob Birck; Svendsen, Svend

    2008-01-01

    window is made of fiber-reinforced plastic (plastic reinforced by fine fibers made of glass). This composite material is a weatherproof material with very low thermal conductivity and high mechanical strength. These properties make the material very suitable for frame profiles due to lower heat loss...... minus the heat loss integrated over the heating season. It is assumed that in northern cold climates all of the solar gain during the heating season can be utilized for space heating. Problems with overheating in the summer period must be solved with overhang or moveable solar shading devices. Two...... and longer durability of the window. The glazing in these fiber reinforced polyester windows is both unsealed and sealed triple glazing units. To increase the net energy gain slim frame profiles have been developed to increase the glazing area and thereby the solar gain. The challenge when developing slim...

  15. A Work-Integrated Learning (WIL) Framework to Develop Graduate Skills and Attributes in an Australian University's Accounting Program

    Science.gov (United States)

    Leong, Raymond; Kavanagh, Marie

    2013-01-01

    Universities are being placed under increasing pressure to produce employable work ready graduates who are able to cope in a rapidly changing work environment. This has resulted in universities offering their undergraduate students the opportunity to gain business acumen and real world experience by undertaking work-integrated learning (WIL) as…

  16. Ultra-high gain diffusion-driven organic transistor

    Science.gov (United States)

    Torricelli, Fabrizio; Colalongo, Luigi; Raiteri, Daniele; Kovács-Vajna, Zsolt Miklós; Cantatore, Eugenio

    2016-01-01

    Emerging large-area technologies based on organic transistors are enabling the fabrication of low-cost flexible circuits, smart sensors and biomedical devices. High-gain transistors are essential for the development of large-scale circuit integration, high-sensitivity sensors and signal amplification in sensing systems. Unfortunately, organic field-effect transistors show limited gain, usually of the order of tens, because of the large contact resistance and channel-length modulation. Here we show a new organic field-effect transistor architecture with a gain larger than 700. This is the highest gain ever reported for organic field-effect transistors. In the proposed organic field-effect transistor, the charge injection and extraction at the metal–semiconductor contacts are driven by the charge diffusion. The ideal conditions of ohmic contacts with negligible contact resistance and flat current saturation are demonstrated. The approach is general and can be extended to any thin-film technology opening unprecedented opportunities for the development of high-performance flexible electronics. PMID:26829567

  17. Employing finite-state machines in data integrity problems

    Directory of Open Access Journals (Sweden)

    Malikov Andrey

    2016-01-01

    Full Text Available This paper explores the issue of group integrity of tuple subsets regarding corporate integrity constraints in relational databases. A solution may be found by applying the finite-state machine theory to guarantee group integrity of data. We present a practical guide to coding such an automaton. After creating SQL queries to manipulate data and control its integrity for real data domains, we study the issue of query performance, determine the level of transaction isolation, and generate query plans.

  18. Measurement of the dynamic response of low-gain solid-state photodetector under weak pulse illumination

    CERN Document Server

    Clément, D; Morel, Christian

    2000-01-01

    This paper presents the development of a Tunable Light Pulse Generator built to measure the quantum efficiency of photodetectors under continuous or pulsed (20 ns FWHM) illumination as a function of wavelength in the Visible-UV region. For this purpose, a miniature Hamamatsu R5600U-04 PMT with low cathode resistivity can be used as reference detector. Dedicated electronics was developed in order to measure simultaneously the cathode and anode currents. This should allow to determine precisely the gain as a function of the high voltage applied to the PMT. Preliminary measurements using the TLPG do not demonstrate significant differences between the dynamic (approx 10 000 photons) and DC responses of PIN photodiodes down to 300 nm.

  19. Receiver gain function: the actual NMR receiver gain

    OpenAIRE

    Mo, Huaping; Harwood, John S.; Raftery, Daniel

    2010-01-01

    The observed NMR signal size depends on the receiver gain parameter. We propose a receiver gain function to characterize how much the raw FID is amplified by the receiver as a function of the receiver gain setting. Although the receiver is linear for a fixed gain setting, the actual gain of the receiver may differ from what the gain setting suggests. Nevertheless, for a given receiver, we demonstrate that the receiver gain function can be calibrated. Such a calibration enables accurate compar...

  20. Direct ink write fabrication of transparent ceramic gain media

    Science.gov (United States)

    Jones, Ivy Krystal; Seeley, Zachary M.; Cherepy, Nerine J.; Duoss, Eric B.; Payne, Stephen A.

    2018-01-01

    Solid-state laser gain media based on the garnet structure with two spatially distinct but optically contiguous regions have been fabricated. Transparent gain media comprised of a central core of Y2.97Nd0.03Al5.00O12.00 (Nd:YAG) and an undoped cladding region of Y3Al5O12 (YAG) were fabricated by direct ink write and transparent ceramic processing. Direct ink write (DIW) was employed to form the green body, offering a general route to preparing functionally structured solid-state laser gain media. Fully-dense transparent optical ceramics in a "top hat" geometry with YAG/Nd:YAG have been fabricated by DIW methods with optical scatter at 1064 nm of <3%/cm.

  1. Women's self-employment: An act of institutional (dis)integration?

    DEFF Research Database (Denmark)

    Klyver, Kim; Nielsen, Suna Løwe; Evald, Majbritt Rostgaard

    2013-01-01

    In this paper we investigate the extent to which gender equality disintegrates women's self-employment choice (compared to that for men) and whether this is contingent upon a country's development stage and industries. We rely on symbolic interactionism to argue that employment choices emerge from...... an interactive conversation between individual and social institutional processes. Using data from 61 countries, we find that overall gender equality is associated with the gender gap in men's and women's self-employment choices and that this association depends upon the country's development stage...

  2. Building professionalism and employability skills: embedding employer engagement within first-year computing modules

    Science.gov (United States)

    Hanna, Philip; Allen, Angela; Kane, Russell; Anderson, Neil; McGowan, Aidan; Collins, Matthew; Hutchison, Malcolm

    2015-07-01

    This paper outlines a means of improving the employability skills of first-year university students through a closely integrated model of employer engagement within computer science modules. The outlined approach illustrates how employability skills, including communication, teamwork and time management skills, can be contextualised in a manner that directly relates to student learning but can still be linked forward into employment. The paper tests the premise that developing employability skills early within the curriculum will result in improved student engagement and learning within later modules. The paper concludes that embedding employer participation within first-year models can help relate a distant notion of employability into something of more immediate relevance in terms of how students can best approach learning. Further, by enhancing employability skills early within the curriculum, it becomes possible to improve academic attainment within later modules.

  3. Slow-light-enhanced gain in active photonic crystal waveguides

    DEFF Research Database (Denmark)

    Ek, Sara; Hansen, Per Lunnemann; Chen, Yaohui

    2014-01-01

    Passive photonic crystals have been shown to exhibit a multitude of interesting phenomena, including slow-light propagation in line-defect waveguides. It was suggested that by incorporating an active material in the waveguide, slow light could be used to enhance the effective gain of the material......, which would have interesting application prospects, for example enabling ultra-compact optical amplifiers for integration in photonic chips. Here we experi- mentally investigate the gain of a photonic crystal membrane structure with embedded quantum wells. We find that by solely changing the photonic...... crystal structural parameters, the maximum value of the gain coefficient can be increased compared with a ridge waveguide structure and at the same time the spectral position of the peak gain be controlled. The experimental results are in qualitative agreement with theory and show that gain values similar...

  4. Measuring employment precariousness in the European Working Conditions Survey: the social distribution in Europe.

    Science.gov (United States)

    Puig-Barrachina, Vanessa; Vanroelen, Christophe; Vives, Alejandra; Martínez, José Miguel; Muntaner, Carles; Levecque, Katia; Benach, Joan; Louckx, Fred

    2014-01-01

    Precarious employment is becoming an increasingly important social determinant of health inequalities among workers. The way in which contemporary employment arrangements and their health consequences are addressed in empirical research is mostly based on the contract-related or employment instability dimension. A broader conceptual approach including various important characteristics of the degrading of employment conditions and relations is needed. The general objective of this paper is to empirically test a new multidimensional construct for measuring precarious employment in an existing database. Special focus is on the social distribution of precarious employment. A subsample of 21,415 participants in the EU-27 from the Fourth European Working Conditions Survey-2005 was analysed. A cross-sectional study of the social distribution of precarious employment was conducted through the analysis of proportional differences according to gender, social class and credentials for the European Union as a whole and within each country. The 8 dimensions of the employment precariousness construct were represented by 11 indicators. In general, women, workers without supervisory authority, those with fewer credentials, and those living in Eastern and Southern European countries suffer the highest levels of precarious employment. Exceptionally, men, workers with supervisory authority and those with the highest credentials suffer the highest levels of long working hours, schedule unpredictability and uncompensated flexible working times. This article offers the first validation for an innovative multidimensional conceptualisation of employment precariousness applied to the analysis of existing survey data, showing the unequal distribution of precarious employment across the European labour force. This set of indicators can be useful for monitoring precarious employment.

  5. A current mode feed-forward gain control system for a 0.8 V CMOS hearing aid

    Energy Technology Data Exchange (ETDEWEB)

    Li Fanyang; Yang Haigang; Liu Fei; Yin Tao, E-mail: yanghg@mail.ie.ac.cn [Institute of Electronics, Chinese Academy of Sciences, Beijing 100080 (China)

    2011-06-15

    A current mode feed-forward gain control (CMFGC) technique is presented, which is applied in the front-end system of a hearing aid chip. Compared with conventional automatic gain control (AGC), CMFGC significantly improves the total harmonic distortion (THD) by digital gain control. To attain the digital gain control codes according to the extremely weak output signal from the microphone, a rectifier and a state controller implemented in current mode are proposed. A prototype chip has been designed based on a 0.13 {mu}m standard CMOS process. The measurement results show that the supply voltage can be as low as 0.6 V. And with the 0.8 V supply voltage, the THD is improved and below 0.06% (-64 dB) at the output level of 500 mV{sub p-p}, yet the power consumption is limited to 40 {mu}W. In addition, the input referred noise is only 4 {mu}V{sub rms} and the maximum gain is maintained at 33 dB. (semiconductor integrated circuits)

  6. A current mode feed-forward gain control system for a 0.8 V CMOS hearing aid

    International Nuclear Information System (INIS)

    Li Fanyang; Yang Haigang; Liu Fei; Yin Tao

    2011-01-01

    A current mode feed-forward gain control (CMFGC) technique is presented, which is applied in the front-end system of a hearing aid chip. Compared with conventional automatic gain control (AGC), CMFGC significantly improves the total harmonic distortion (THD) by digital gain control. To attain the digital gain control codes according to the extremely weak output signal from the microphone, a rectifier and a state controller implemented in current mode are proposed. A prototype chip has been designed based on a 0.13 μm standard CMOS process. The measurement results show that the supply voltage can be as low as 0.6 V. And with the 0.8 V supply voltage, the THD is improved and below 0.06% (-64 dB) at the output level of 500 mV p-p , yet the power consumption is limited to 40 μW. In addition, the input referred noise is only 4 μV rms and the maximum gain is maintained at 33 dB. (semiconductor integrated circuits)

  7. [Multidimensional measurement of precarious employment: social distribution and its association with health in Catalonia (Spain)].

    Science.gov (United States)

    Benach, Joan; Julià, Mireia; Tarafa, Gemma; Mir, Jordi; Molinero, Emilia; Vives, Alejandra

    2015-01-01

    To show the prevalence of precarious employment in Catalonia (Spain) for the first time and its association with mental and self-rated health, measured with a multidimensional scale. A cross-sectional study was conducted using data from the II Catalan Working Conditions Survey (2010) with a subsample of employed workers with a contract. The prevalence of precarious employment using a multidimensional scale and its association with health was calculated using multivariate log-binomial regression stratified by gender. The prevalence of precarious employment in Catalonia was high (42.6%). We found higher precariousness in women, youth, immigrants, and manual and less educated workers. There was a positive gradient in the association between precarious employment and poor health. Precarious employment is associated with poor health in the working population. Working conditions surveys should include questions on precarious employment and health indicators, which would allow monitoring and subsequent analyses of health inequalities. Copyright © 2015 SESPAS. Published by Elsevier Espana. All rights reserved.

  8. Virtual Placements to Develop Employability Skills for Civil and Environmental Engineering Students

    Directory of Open Access Journals (Sweden)

    Parneet Paul

    2015-04-01

    Full Text Available This project work addresses the crucial need to encourage undergraduate civil and environmental engineering students to gain employment skills and training right from the start of their studies so that their overall employability increases; their confidence level in networking with industry and within the workplace increases; and so that they are successfully able to obtain employment after finishing their studies. This initiative is a stepping-stone employability exercise which focuses specifically on first year students to help them engage with industry right from the start of their course. It is proposed that they would gain some realistic work experience both individually and as part of group within a virtual work environment using an action learning approach. The virtual environment used was based on SecondLife, a popular virtual reality programme. A pilot scheme was set up and run at Brunel University during the summer of 2014 using eight self-selecting first year students. The scheme’s outputs were extensively monitored and evaluated to assess its impact on the development of employability skills. This approach may prove a cost effective way of letting students gain an insight into the workplace whilst improving these skills. It may also prove a way for employers to select from a large range of students the best to actually undertake their real work-based internships.

  9. Calibration of the SH134-20 Standard Gain Horn

    DEFF Research Database (Denmark)

    Pivnenko, Sergey; Breinbjerg, Olav

    This report documents the measurement of the linearly polarized SH134-20 Standard Gain Horn. The measurement comprises on-axis gain, on-axis polarization characteristics, and reflection coefficient at 111 frequencies in the frequency range from 22-33 GHz. The measurement was carried out at the DTU...

  10. Path integral measure for first-order and metric gravities

    International Nuclear Information System (INIS)

    Aros, Rodrigo; Contreras, Mauricio; Zanelli, Jorge

    2003-01-01

    The equivalence between the path integrals for first-order gravity and the standard torsion-free, metric gravity in 3 + 1 dimensions is analysed. Starting with the path integral for first-order gravity, the correct measure for the path integral of the metric theory is obtained

  11. Modelling NO2 concentrations at the street level in the GAINS integrated assessment model: projections under current legislation

    Science.gov (United States)

    Kiesewetter, G.; Borken-Kleefeld, J.; Schöpp, W.; Heyes, C.; Thunis, P.; Bessagnet, B.; Terrenoire, E.; Gsella, A.; Amann, M.

    2014-01-01

    NO2 concentrations at the street level are a major concern for urban air quality in Europe and have been regulated under the EU Thematic Strategy on Air Pollution. Despite the legal requirements, limit values are exceeded at many monitoring stations with little or no improvement in recent years. In order to assess the effects of future emission control regulations on roadside NO2 concentrations, a downscaling module has been implemented in the GAINS integrated assessment model. The module follows a hybrid approach based on atmospheric dispersion calculations and observations from the AirBase European air quality database that are used to estimate site-specific parameters. Pollutant concentrations at every monitoring site with sufficient data coverage are disaggregated into contributions from regional background, urban increment, and local roadside increment. The future evolution of each contribution is assessed with a model of the appropriate scale: 28 × 28 km grid based on the EMEP Model for the regional background, 7 × 7 km urban increment based on the CHIMERE Chemistry Transport Model, and a chemical box model for the roadside increment. Thus, different emission scenarios and control options for long-range transport as well as regional and local emissions can be analysed. Observed concentrations and historical trends are well captured, in particular the differing NO2 and total NOx = NO + NO2 trends. Altogether, more than 1950 air quality monitoring stations in the EU are covered by the model, including more than 400 traffic stations and 70% of the critical stations. Together with its well-established bottom-up emission and dispersion calculation scheme, GAINS is thus able to bridge the scales from European-wide policies to impacts in street canyons. As an application of the model, we assess the evolution of attainment of NO2 limit values under current legislation until 2030. Strong improvements are expected with the introduction of the Euro 6 emission standard

  12. Gain transient control for wavelength division multiplexed access networks using semiconductor optical amplifiers

    DEFF Research Database (Denmark)

    Gibbon, Timothy Braidwood; Osadchiy, Alexey Vladimirovich; Kjær, Rasmus

    2009-01-01

    Gain transients can severely hamper the upstream network performance in wavelength division multiplexed (WDM) access networks featuring erbium doped fiber amplifiers (EDFAs) or Raman amplification. We experimentally demonstrate for the first time using 10 Gb/s fiber transmission bit error rate...... measurements how a near-saturated semiconductor optical amplifier (SOA) can be used to control these gain transients. An SOA is shown to reduce the penalty of transients originating in an EDFA from 2.3 dB to 0.2 dB for 10 Gb/s transmission over standard single mode fiber using a 231-1 PRBS pattern. The results...... suggest that a single SOA integrated within a WDM receiver at the metro node could offer a convenient all-optical solution for upstream transient controlin WDM access networks....

  13. Tropical forests are a net carbon source based on aboveground measurements of gain and loss

    Science.gov (United States)

    Baccini, A.; Walker, W.; Carvalho, L.; Farina, M.; Sulla-Menashe, D.; Houghton, R. A.

    2017-10-01

    The carbon balance of tropical ecosystems remains uncertain, with top-down atmospheric studies suggesting an overall sink and bottom-up ecological approaches indicating a modest net source. Here we use 12 years (2003 to 2014) of MODIS pantropical satellite data to quantify net annual changes in the aboveground carbon density of tropical woody live vegetation, providing direct, measurement-based evidence that the world’s tropical forests are a net carbon source of 425.2 ± 92.0 teragrams of carbon per year (Tg C year-1). This net release of carbon consists of losses of 861.7 ± 80.2 Tg C year-1 and gains of 436.5 ± 31.0 Tg C year-1. Gains result from forest growth; losses result from deforestation and from reductions in carbon density within standing forests (degradation or disturbance), with the latter accounting for 68.9% of overall losses.

  14. Water savings through off-farm employment?

    NARCIS (Netherlands)

    Wachong Castro, V.; Heerink, N.; Shi, X.; Qu, W.

    2010-01-01

    Purpose – The purpose of this paper is to gain more insight into the relationship between off-farm employment of rural households and water-saving investments and irrigation water use in rural China. Design/methodology/approach – Data from a survey held among 317 households in Minle County, Zhangye

  15. Electromagnetic model of a near-field cable-free impedance and gain measurement technique for electrically small antennas

    DEFF Research Database (Denmark)

    Zhang, Jiaying; Pivnenko, Sergey; Breinbjerg, Olav

    2011-01-01

    the signal scattered by it when it is loaded in turn with three known loads. The determination of the antenna impedance and gain is formulated by using the spherical wave expansion technique. The advantages of this measurement technique are summarized as follows. First, the limited dynamic range problem...

  16. Image-converter streak cameras with very high gain

    International Nuclear Information System (INIS)

    1975-01-01

    A new camera is described with slit scanning and very high photonic gain (G=5000). Development of the technology of tubes and microchannel plates has enabled integration of such an amplifying element in an image converter tube which does away with the couplings and the intermediary electron-photon-electron conversions of the classical converter systems having external amplification. It is thus possible to obtain equal or superior performance while retaining considerable gain for the camera, great compactness, great flexibility in use, and easy handling. (author)

  17. Employment Gains and Wage Declines: The Erosion of Black Women’s Relative Wages Since 1980

    Science.gov (United States)

    PETTIT, BECKY; EWERT, STEPHANIE

    2009-01-01

    Public policy initiatives in the 1950s and 1960s, including Affirmative Action and Equal Employment Opportunity law, helped mitigate explicit discrimination in pay, and the expansion of higher education and training programs have advanced the employment fortunes of many American women. By the early 1980s, some scholars proclaimed near equity in pay between black and white women, particularly among young and highly skilled workers. More recent policy initiatives and labor market conditions have been arguably less progressive for black women’s employment and earnings: through the 1980s, 1990s, and the first half of the 2000s, the wage gap between black and white women widened considerably. Using data from the Current Population Survey Merged Outgoing Rotation Group (CPS-MORG), this article documents the racial wage gap among women in the United States from 1979 to 2005. We investigate how demographic and labor market conditions influence employment and wage inequality among black and white women over the period. Although shifts in labor supply influence the magnitude of the black-white wage gap among women, structural disadvantages faced by black women help explain the growth in the racial wage gap. PMID:19771940

  18. An efficient fast response and high-gain solar-blind flexible ultraviolet photodetector employing hybrid geometry

    Science.gov (United States)

    Hussain, Amreen A.; Pal, Arup R.; Patil, Dinkar S.

    2014-05-01

    We report high performance flexible hybrid ultraviolet photodetector with solar-blind sensitivity using nanocomposite film of plasma polymerized aniline-titanium dioxide. A facile solvent-free plasma technique is used to synthesize superior quality hybrid material with high yield. The hybrid photodetector exhibited high photoconductive gain of the order of ˜105 and fast speed with response and recovery time of 22.87 ms and 34.23 ms. This is an excellent result towards getting a balance in the response speed and photoconductive gain trade-off of the photodetectors reported so far. In addition, the device has the advantages of enhanced photosensitivity ((Ilight - Idark)/Idark) of the order of ˜102 and high responsivity of ˜104 AW-1. All the merits substantiates that, to prepare hybrid material, plasma based method holds potential to be an easy way for realizing large scale nanostructured photodetectors for practical applications.

  19. Measuring the impact of employment services centres in Lebanon ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    This project will enhance the capacity of employment services centres (ESC) in Palestinian ... employment counseling and job matching services for male and female ... and terms of employment (such as the presence of a contract, work hours, ...

  20. Measurement of radon concentration in air employing Lucas chamber

    International Nuclear Information System (INIS)

    Machaj, B.

    1997-01-01

    The results of investigations aimed to determine the main features of radon concentration gauge in air, employing 0.17 L Lucas chamber, and air sample forced by an air pump are presented. For two hour sampling and measuring cycle time the dynamic error in the worst case (first read out) equals 5 % relative to the step jump of radon concentration. This is due to the increase of activity of the decay products in the chamber. It was observed that the short lived radon decay products (Po-218, Pb-214, Bi-214) are depositing on the walls of the chamber and they are not removed by flushing the chamber with air. (author)

  1. Soldiers’ employment attitude and employability: An exploratory study

    Directory of Open Access Journals (Sweden)

    Peng Gao

    2015-04-01

    Full Text Available Purpose: Nowadays it is very difficult for Chinese retired soldiers to find proper jobs, and the primary reason is the significant gap between job requirements and soldiers owned job skills. Therefore, it is very important to improve the soldiers’ job skills and enhance their understanding of employment.Design/methodology/approach: This paper expands the study scope from the soldiers’ job skills to the employability, initiatively introduces the employment attitude which has obvious impact on the employment of soldiers, and analyses the influence that employment attitude can play on employability. At last, this paper develops statistical method to find the relationship between soldiers’ employment attitude and employability.Findings: The empirical analysis shows that soldiers’ employment attitude has the positive linkage with employability, which makes the employment attitude a measurable variable for the employability rather than an absolute standard.Research limitations/implications: According to the research purpose, more variables should be considered in the model, consequently, there are only three indicators to describe solders’ employment attitude and four indicators to describe solders’ employability.Originality/value: This paper takes research on soldiers’ employability in a new perspective. The soldiers’ employment attitude is served as the entry point, showing the influence that soldiers’ employment attitude has on employability.

  2. Study of an automatic readout integrated circuit for the signal shaping of the ATLAS electromagnetic calorimeter; Etude d`un circuit integre de commutation automatique de gain pour le circuit de mise en forme du signal du calorimetre electromagnetique d`ATLAS

    Energy Technology Data Exchange (ETDEWEB)

    Bussat, J.M. [Laboratoire d`Annecy-le-Vieux de Physique des Particules, 74 - Annecy-le-Vieux (France)

    1996-12-01

    This paper describes the present state of the development of an automatic readout integrated circuit that can be used, connected to the four gain shaper of LAL, at the ATLAS electromagnetic calorimeter.

  3. Integration of the effects of air quality measures in the SOLVE mix of measures

    International Nuclear Information System (INIS)

    Hesselmans, T.; Heijnis, F.

    2008-01-01

    SOLVE is the Dutch abbreviation for fast solutions for air and traffic and is a website by means of which provinces and municipalities in the Netherlands can gain insight into the best measures for traffic to improve the quality of the ambient air. Since halfway June 2008, the effects on air quality of approximately 35 traffic measures were included in the SOLVE mix of measures. The effects of traffic measures on emissions of particulate matter and nitrogen dioxide have been calculated. The effects are expressed in a decrease of the contribution of traffic indicated in a scale from A (very large decrease) to E (no decrease). The outcome depends on the location where the measure is implemented. [mk] [nl

  4. Has the tradeoff between productivity gains and job growth disappeared?

    NARCIS (Netherlands)

    P.A.D. Cavelaars

    2004-01-01

    textabstractPolicymakers’ efforts to boost trend output growth may be hampered by the presence of a tradeoff between productivity gains and job creation. This paper presents empirical evidence that the negative relationship between productivity growth and employment growth that prevailed in the

  5. Stabilization of the photomultiplier gain of a liquid scintillation counter

    International Nuclear Information System (INIS)

    Alkhazov, I.D.; Dmitriev, V.D.; Kuznetsov, A.V.; Malkin, L.Z.; Petrov, B.F.; Sheremet'ev, A.K.; Shpakov, V.I.

    1987-01-01

    A stabilization system of photomultiplier gain, where light-emitting diode flashes have been used to obtain a reference signal, is described. The diode is placed just in the liquid scintilllator volume. The stabilization system contains several (according to the number of photomultipliers) identical channels, which of them consists of a colorimeter, a control trigger and an integrator with an operational amplifier. Increase of photomultiplier stability is reached by changing voltage of photomultiplier power according to the reference signal amplitude. The level of background and efficiency of neutron detection by a scintillation counter are unchanged when using the stabilization system for 10 days of measurements

  6. The flow measurement methods for the primary system of integral reactors

    International Nuclear Information System (INIS)

    Lee, J.; Seo, J. K.; Lee, D. J.

    2001-01-01

    It is the common features of the integral reactors that the main components of the primary system are installed within the reactor vessel, and so there are no any flow pipes connecting the reactor coolant pumps or steam generators. Due to no any flow pipes, it is impossible to measure the differential pressure at the primary system of the integral reactors, and it also makes impossible measure the primary coolant flow rate. The objective of the study is to draw up the flow measurement methods for the primary system of integral reactors. As a result of the review, we have made a selection of the flow measurement method by pump speed, bt HBM, and by pump motor power as the flow measurement methods for the primary system of integral reactors. Peculiarly, we did not found out a precedent which the direct pump motor power-flow rate curve is used as the flow measurement method in the existing commercial nuclear power reactors. Therefore, to use this method for integral reactors, it is needed to bear the follow-up measures in mind. The follow-up measures is included in this report

  7. Randomized Trial of Supported Employment Integrated With Assertive Community Treatment for Rural Adults With Severe Mental Illness

    Science.gov (United States)

    Gold, Paul B; Meisler, Neil; Santos, Alberto B; Carnemolla, Mark A; Williams, Olivia H; Keleher, Jennie

    2006-01-01

    Urban-based randomized clinical trials of integrated supported employment (SE) and mental health services in the United States on average have doubled the employment rates of adults with severe mental illness (SMI) compared to traditional vocational rehabilitation. However, studies have not yet explored if the service integrative functions of SE will be effective in coordinating rural-based services that are limited, loosely linked, and geographically dispersed. In addition, SE's ability to replicate the work outcomes of urban programs in rural economies with scarce and less diverse job opportunities remains unknown. In a rural South Carolina county, we designed and implemented a program blending Assertive Community Treatment (ACT) with an SE model, Individual Placement and Support (IPS). The ACT-IPS program operated with ACT and IPS subteams that tightly integrated vocational with mental health services within each self-contained team. In a 24-month randomized clinical trial, we compared ACT-IPS to a traditional program providing parallel vocational and mental health services on competitive work outcomes for adults with SMI (N = 143; 69% schizophrenia, 77% African American). More ACT-IPS participants held competitive jobs (64 versus 26%; p < .001, effect size [ES] = 0.38) and earned more income (median [Mdn] = $549, interquartile range [IQR] = $0–$5,145, versus Mdn = $0, IQR = $0–$40; p < .001, ES = 0.70) than comparison participants. The competitive work outcomes of this rural ACT-IPS program closely resemble those of urban SE programs. However, achieving economic self-sufficiently and developing careers probably require increasing access to higher education and jobs imparting marketable technical skills. PMID:16177278

  8. Becoming Overweight Without Gaining a Pound: Weight Evaluations and the Social Integration of Mexicans in the United States.

    Science.gov (United States)

    Altman, Claire E; Van Hook, Jennifer; Gonzalez, Jonathan

    2017-01-01

    Mexican women gain weight with increasing duration in the United States. In the United States, body dissatisfaction tends to be associated with depression, disordered eating, and incongruent weight evaluations, particularly among white women and women of higher socioeconomic status. However, it remains unclear how overweight and obesity is interpreted by Mexican women. Using comparable data of women ages 20-64 from both Mexico (the 2006 Encuesta Nacional de Salud y Nutricion; N=17,012) and the United States (the 1999-2009 National Health and Nutrition Examination Surveys; N=8,487), we compare weight status evaluations among Mexican nationals, Mexican immigrants, U.S.-born Mexicans, U.S.-born non-Hispanic Whites, and U.S.-born non-Hispanic blacks. Logistic regression analyses, which control for demographic and social-economic variables and measured body mass index and adjust for the likelihood of migration for Mexican nationals, indicate that the tendency to self-evaluate as overweight among Mexicans converges with levels among non-Hispanic whites and diverges from blacks over time in the United States. Overall, the results suggest a U.S. integration process in which Mexican-American women's less critical self-evaluations originate in Mexico but fade with time in the United States as they gradually adopt U.S. white norms for thinner body sizes. These results are discussed in light of social comparison and negative health assimilation.

  9. Improve data integration performance by employing metadata management utility

    Energy Technology Data Exchange (ETDEWEB)

    Wei, M.; Sung, A.H. [New Mexico Petroleum Recovery Research Center, Socorro, NM (United States)

    2005-07-01

    This conference paper explored ways of integrating petroleum and exploration data obtained from different sources in order to provide more comprehensive data for various analysis purposes and to improve the integrity and consistency of integrated data. This paper proposes a methodology to enhance oil and gas industry data integration performance by cooperating data management utilities in Microsoft SQL Server database management system (DBMS) for small scale data integration without support of commercial software. By semi-automatically capturing metadata, data sources are investigated in detail, data quality problems are partially cleansed, and the performance of data integration is improved. 20 refs., 7 tabs., 1 fig.

  10. Combining Quality Work-Integrated Learning and Career Development Learning through the Use of the SOAR Model to Enhance Employability

    Science.gov (United States)

    Reddan, Gregory; Rauchle, Maja

    2017-01-01

    This paper presents students' perceptions of the benefits to employability of a suite of courses that incorporate both work-integrated learning (WIL) and career development learning (CDL). Field Project A and Field Project B are elective courses in the Bachelor of Exercise Science at Griffith University. These courses engage students in active and…

  11. Employment Gains and Wage Declines: The Erosion of Black Women’s Relative Wages Since 1980

    OpenAIRE

    PETTIT, BECKY; EWERT, STEPHANIE

    2009-01-01

    Public policy initiatives in the 1950s and 1960s, including Affirmative Action and Equal Employment Opportunity law, helped mitigate explicit discrimination in pay, and the expansion of higher education and training programs have advanced the employment fortunes of many American women. By the early 1980s, some scholars proclaimed near equity in pay between black and white women, particularly among young and highly skilled workers. More recent policy initiatives and labor market conditions hav...

  12. Interaction between Space and Effectiveness in Multisensory Integration: Behavioral and Perceptual Measures

    Directory of Open Access Journals (Sweden)

    Aaron R Nidiffer

    2011-10-01

    Full Text Available Previous research has described several core principles of multisensory integration. These include the spatial principle, which relates the integrative product to the physical location of the stimuli and the principle of inverse effectiveness, in which minimally effective stimuli elicit the greatest multisensory gains when combined. In the vast majority of prior studies, these principles have been studied in isolation, with little attention to their interrelationships and possible interactions. Recent neurophysiological studies in our laboratory have begun to examine these interactions within individual neurons in animal models, work that we extend here into the realm of human performance and perception. To test this, we conducted a psychophysical experiment in which 51 participants were tasked with judging the location of a target stimulus. Target stimuli were visual flashes and auditory noise bursts presented either alone or in combination at four locations and at two intensities. Multisensory combinations were always spatially coincident. A significant effect was found for response times and a marginal effect was found for accuracy, such that the degree of multisensory gain changed as a function of the interaction between space and effectiveness. These results provide further evidence for a strong interrelationship between the multisensory principles in dictating human performance.

  13. Promotion of sustainable employability : Occupational health in the meat processing industry

    NARCIS (Netherlands)

    van Holland, Breunis Johannes

    2016-01-01

    Due to rising retirement age, sustainable employability is gaining interest among employers. Such is the case in the meat processing industry. A strategy to address these challenges is health promotion at work. Therefore, the largest Dutch meat processing company has implemented a Workers’ Health

  14. The Effect of Intellectual Capital on A Company's Performance Moderated by ITS Governance and IT Strategy Integration Employed By Bank Listed in Indonesian Stock Exchange

    Directory of Open Access Journals (Sweden)

    Dodi Wirawan Irawanto

    2017-10-01

    Full Text Available This study investigates whether IT integration and company governance can affect the relationship between intellectual capital and company performance in the Indonesian banking sector. That could happen, as there are ever tighter and more numerous competitiveness levels in the banking sector, especially in the field of information technology (IT and the support given by the top management. This study employs data from 33 banking companies listed on the ISE (Indonesian Stock Exchange in 2013–2014. The testing was done on the elements of VAICTM (VACA, VAHU, STVA, moderated by IT strategy integration (ITSI and corporate governance (DK using the measurement of financial performance (ROA. The findings obtained show that VAHU has a positive effect on financial performance. If the VAICTM element were moderated by ITSI, then a well-integrated IT strategy would weaken the relationship between VACA and banking performance. The limitations of this study lie in the period of the data used, which is limited to 2013–2014, and in that the component used for testing was done in isolation. 

  15. Containment integrity and leak testing. Procedures applied and experiences gained in European countries

    International Nuclear Information System (INIS)

    1987-01-01

    Containment systems are the ultimate safety barrier for preventing the escape of gaseous, liquid and solid radioactive materials produced in normal operation, not retained in process systems, and for keeping back radioactive materials released by system malfunction or equipment failure. A primary element of the containment shell is therefore its leak-tight design. The report describes the present containment concepts mostly used in European countries. The leak-testing procedures applied and the experiences gained in their application are also discussed. The report refers more particularly to pre-operational testing, periodic testing and extrapolation methods of leak rates measured at test conditions to expected leak rates at calculated accident conditions. The actual problems in periodic containment leak rate testing are critically reviewed. In the appendix to the report a summary is given of the regulations and specifications applied in different member countries

  16. Two Integrator Loop Filters: Generation Using NAM Expansion and Review

    Directory of Open Access Journals (Sweden)

    Ahmed M. Soliman

    2010-01-01

    Full Text Available Systematic synthesis method to generate a family of two integrator loop filters based on nodal admittance matrix (NAM expansion is given. Eight equivalent circuits are obtained; six of them are new. Each of the generated circuits uses two grounded capacitors and employs two current conveyors (CCII or two inverting current conveyors (ICCII or a combination of both. The NAM expansion is also used to generate eight equivalent grounded passive elements two integrator loop filters using differential voltage current conveyor (DVCC; six of them are new. Changing the input port of excitation, two new families of eight unity gain lowpass filter circuits each using two CCII or ICCII or combination of both or two DVCC are obtained.

  17. Quantitation of the degree of osteoporosis by measure of total-body calcium employing neutron activation

    International Nuclear Information System (INIS)

    Cohn, S.H.; Zanzi, I.; Vaswani, A.; Wallach, S.; Aloia, J.; Ellis, K.J.

    1975-01-01

    Two techniques for measuring the amount of Ca in the total skeleton were employed: total-body neutron activation analysis (TBNAA) and the determination of the mineral content of a bone of the appendicular skeleton (absorptiometric measurement of the radius, BMC). (U.S.)

  18. Quantum-to-classical transition via fuzzy measurements on high-gain spontaneous parametric down-conversion

    International Nuclear Information System (INIS)

    Vitelli, Chiara; Spagnolo, Nicolo; Toffoli, Lorenzo; Sciarrino, Fabio; De Martini, Francesco

    2010-01-01

    We consider the high-gain spontaneous parametric down-conversion in a noncollinear geometry as a paradigmatic scenario to investigate the quantum-to-classical transition by increasing the pump power, that is, the average number of generated photons. The possibility of observing quantum correlations in such a macroscopic quantum system through dichotomic measurement will be analyzed by addressing two different measurement schemes, based on different dichotomization processes. More specifically, we will investigate the persistence of nonlocality in an increasing size (n/2)-spin singlet state by studying the change in the correlations form as n increases, both in the ideal case and in presence of losses. We observe a fast decrease in the amount of Bell's inequality violation for increasing system size. This theoretical analysis is supported by the experimental observation of macro-macro correlations with an average number of photons of about 10 3 . Our results shed light on the practical extreme difficulty of observing nonlocality by performing such a dichotomic fuzzy measurement.

  19. Effect of integrated care for sick listed patients with chronic low back pain: economic evaluation alongside a randomised controlled trial.

    Science.gov (United States)

    Lambeek, Ludeke C; Bosmans, Judith E; Van Royen, Barend J; Van Tulder, Maurits W; Van Mechelen, Willem; Anema, Johannes R

    2010-11-30

    To evaluate the cost effectiveness, cost utility, and cost-benefit of an integrated care programme compared with usual care for sick listed patients with chronic low back pain. Economic evaluation alongside a randomised controlled trial with 12 months' follow-up. Primary care (10 physiotherapy practices, one occupational health service, one occupational therapy practice) and secondary care (five hospitals) in the Netherlands, 2005-9. 134 adults aged 18-65 sick listed because of chronic low back pain: 66 were randomised to integrated care and 68 to usual care. Integrated care consisted of a workplace intervention based on participatory ergonomics, with involvement of a supervisor, and a graded activity programme based on cognitive behavioural principles. Usual care was provided by general practitioners and occupational physicians according to Dutch guidelines. The primary outcome was duration until sustainable return to work. The secondary outcome was quality adjusted life years (QALYs), measured using EuroQol. Total costs in the integrated care group (£13 165, SD £13 600) were significantly lower than in the usual care group (£18 475, SD £13 616). Cost effectiveness planes and acceptability curves showed that integrated care was cost effective compared with usual care for return to work and QALYs gained. The cost-benefit analyses showed that every £1 invested in integrated care would return an estimated £26. The net societal benefit of integrated care compared with usual care was £5744. Implementation of an integrated care programme for patients sick listed with chronic low back pain has a large potential to significantly reduce societal costs, increase effectiveness of care, improve quality of life, and improve function on a broad scale. Integrated care therefore has large gains for patients and society as well as for employers.

  20. Limits of reliability for the measurement of integral count

    International Nuclear Information System (INIS)

    Erbeszkorn, L.

    1979-01-01

    A method is presented for exact and approximate calculation of reliability limits of measured nuclear integral count. The formulae are applicable in measuring conditions which assure the Poisson distribution of the counts. The coefficients of the approximate formulae for 90, 95, 98 and 99 per cent reliability levels are given. The exact reliability limits for 90 per cent reliability level are calculated up to 80 integral counts. (R.J.)

  1. High-resolution stimulated Brillouin gain spectroscopy in glasses and crystals

    International Nuclear Information System (INIS)

    Faris, G.W.; Jusinski, L.E.; Hickman, A.P.

    1993-01-01

    Theory and measurements are presented for stimulated Brillouin gain spectroscopy in anisotropic media. The coupling between arbitrary pump and Stokes waves and the corresponding acoustic wave is formulated in terms of the elastic displacement vector and the photoelastic tensor. A propagation equation that fully includes transient effects is obtained for the Stokes wave. In the limit of small-signal gains this propagation equation can be solved analytically, yielding expressions that relate experimentally accessible quantities to material properties. Absolute Brillouin steady-state gain coefficients, linewidths, and frequency shifts are thereby determined in a number of optical materials at 532 nm. The Brillouin gain coefficient for fused silica is measured by three techniques, providing the reference for absolute gain measurements. Quantitative agreement is found between theory and experiment for transient effects on stimulated Brillouin scattering

  2. A multidimensional approach to precarious employment: measurement, association with poor mental health and prevalence in the Spanish workforce

    OpenAIRE

    Vives Vergara, Alejandra

    2010-01-01

    Objective: To study the psychometric properties and construct validity of a multidimensional instrument to measure employment precariousness; to assess the association between employment precariousness and poor mental health; to estimate the prevalence and distribution of employment precariousness in the Spanish workforce; and to estimate the population attributable fraction of poor mental health due to employment precariousness. Methods: Cross-sectional study using data from the Psychos...

  3. Use of boron nitride for neutron spectrum characterization and cross-section validation in the epithermal range through integral activation measurements

    Energy Technology Data Exchange (ETDEWEB)

    Radulović, Vladimir, E-mail: vladimir.radulovic@ijs.si [Jožef Stefan Institute, Jamova cesta 39, SI-1000 Ljubljana (Slovenia); Trkov, Andrej [Jožef Stefan Institute, Jamova cesta 39, SI-1000 Ljubljana (Slovenia); IAEA, Vienna International Centre, PO Box 100, A-1400 Vienna (Austria); Jaćimović, Radojko [Jožef Stefan Institute, Jamova cesta 39, SI-1000 Ljubljana (Slovenia); Gregoire, Gilles; Destouches, Christophe [CEA, DEN, DER, Instrumentation Sensors and Dosimetry Laboratory, Cadarache, F-13108 St. Paul-Lez-Durance (France)

    2016-12-21

    A recent experimental irradiation and measurement campaign using containers made from boron nitride (BN) at the Jožef Stefan Institute (JSI) TRIGA Mark II reactor in Ljubljana, Slovenia, has shown the applicability of BN for neutron spectrum characterization and cross-section validation in the epithermal range through integral activation measurements. The first part of the paper focuses on the determination of the transmission function of a BN container through Monte Carlo calculations and experimental measurements. The second part presents the process of tayloring the sensitivity of integral activation measurements to specific needs and a selection of suitable radiative capture reactions for neutron spectrum characterization in the epithermal range. A BN container used in our experiments and its qualitative effect on the neutron spectrum in the irradiation position employed is displayed in the Graphical abstract. - Graphical abstract: Neutron spectra inside the JSI TRIGA Mark II PT irradiation position, obtained with a Monte Carlo calculation: blue: unperturbed, green inside a BN container, of wall thickness 4 mm, 13 mm in diameter and 14 mm in height.

  4. Use of boron nitride for neutron spectrum characterization and cross-section validation in the epithermal range through integral activation measurements

    International Nuclear Information System (INIS)

    Radulović, Vladimir; Trkov, Andrej; Jaćimović, Radojko; Gregoire, Gilles; Destouches, Christophe

    2016-01-01

    A recent experimental irradiation and measurement campaign using containers made from boron nitride (BN) at the Jožef Stefan Institute (JSI) TRIGA Mark II reactor in Ljubljana, Slovenia, has shown the applicability of BN for neutron spectrum characterization and cross-section validation in the epithermal range through integral activation measurements. The first part of the paper focuses on the determination of the transmission function of a BN container through Monte Carlo calculations and experimental measurements. The second part presents the process of tayloring the sensitivity of integral activation measurements to specific needs and a selection of suitable radiative capture reactions for neutron spectrum characterization in the epithermal range. A BN container used in our experiments and its qualitative effect on the neutron spectrum in the irradiation position employed is displayed in the Graphical abstract. - Graphical abstract: Neutron spectra inside the JSI TRIGA Mark II PT irradiation position, obtained with a Monte Carlo calculation: blue: unperturbed, green inside a BN container, of wall thickness 4 mm, 13 mm in diameter and 14 mm in height.

  5. Synchronization and secure communication of chaotic systems via robust adaptive high-gain fuzzy observer

    International Nuclear Information System (INIS)

    Hyun, Chang-Ho; Park, Chang-Woo; Kim, Jae-Hun; Park, Mignon

    2009-01-01

    This paper proposes an alternative robust adaptive high-gain fuzzy observer design scheme and its application to synchronization and secure communication of chaotic systems. It is assumed that their states are immeasurable and their parameters are unknown. The structure of the proposed observer is represented by Takagi-Sugeno fuzzy model and has the integrator of the estimation error. It improves the performance of high-gain observer and makes the proposed observer robust against noisy measurements, uncertainties and parameter perturbations as well. Using Lyapunov stability theory, an adaptive law is derived to estimate the unknown parameters and the stability of the proposed observer is analyzed. Some simulation result of synchronization and secure communication of chaotic systems is given to present the validity of theoretical derivations and the performance of the proposed observer as an application.

  6. Cancer and its impact on work among the self-employed: A need to bridge the knowledge gap.

    Science.gov (United States)

    Sharp, L; Torp, S; Van Hoof, E; de Boer, A G E M

    2017-09-01

    Self-employment-the so-called flexible layer of the economy-has gained importance following the 2007-2008 global economic and financial crisis. In Europe, the self-employed now comprise on average 15% of workers [Eurostat, Labour market and Labour force survey (LFS) statistics, 2016]. Around one-third of self-employed people also provide jobs for others [European Commission, Fact Sheet. 2015 Employment and Social Developments in Europe Review: frequently asked questions, 2016]. Moreover, this group of workers adapts quickly to changing circumstances. In the UK, for instance, recent growth in self-employment is considered to have made an important contribution to labour market recovery [Hatfield, Self-employment in Europe. London, Institute of Public Policy Research, 2015]. Across the European Union self-employment is viewed as a key enabler of sustainable economic growth and, reflecting this, the Europe 2020 strategy encourages member states both to promote self-employment and to remove measures that discourage it [Library of the European Parliament, Self-employment and social security. Effects on innovation and economic growth, 2013]. © 2017 John Wiley & Sons Ltd.

  7. New Forms of Employment and Working Time in the Service Economy

    DEFF Research Database (Denmark)

    Thaulow, Ivan; Boll, Joachim

    in the sercvice sector. The need for enterprises to gain more flexibility comes through in two ways on the Danish labour market. First, it has made the weekly working hours more flexible than just ten years ago. Secondly, numeric flexibility on the Danish labour market is gained through a numer of new forms......The Study presented in this paper is part of the European project: New Forms of Employment and Working Time in the Servece Economy/NESY. The overalle objective of the project is to analyse the emergence and the effects of the new forms of employment, work organisation and working time patterns...... of employment such as time and task-limited work, temporary agency and freelance work. Illustrative Danish examples of time or task-limited employment, temporary work agencies or freelance work can, as expected be forund in the commercial and clerical sector. The same goes for parts of the expanding business...

  8. Comparison of thermo-hydraulic analysis with measurements for HELIOS. The scaled integral test loop for PEACER

    International Nuclear Information System (INIS)

    Cho, Jae Hyun; Lim, Jun; Kim, Ji Hak; Hwang, Il Soon

    2009-01-01

    A scaled-down Lead-Bismuth Eutectic circulating integral test loop named as HELIOS (Heavy Eutectic liquid metal Loop for Integral test of Operability and Safety of PEACER) has been employed to characterize steady-state isothermal forced circulation behavior and non-isothermal natural circulation capability of the lead and lead-alloy cooled advanced nuclear energy systems (LACANES). In this time, thermal-hydraulic experiments have been carried out using HELIOS following rigorous calibration campaigns on sensors for temperature and pressure, especially isothermal steady-state forced convection using by the pump. The isothermal steady-state forced convection test was performed to obtain the pressure loss information including friction loss coefficients and form loss coefficients. Then its data were compared with multi-approaching analysis including hand calculation results and computer simulation code results. (MARS-LBE, CFX). We report the results of comparisons between the analysis and measurements together. (author)

  9. Study on high gain broadband optical parametric chirped pulse amplification

    International Nuclear Information System (INIS)

    Zhang, S.K.; Fujita, M.; Yamanaka, C.; Yoshida, H.; Kodama, R.; Fujita, H.; Nakatsuka, M.; Izawa, Y.

    2000-01-01

    Optical parametric chirped pulse amplification has apparent advantages over the current schemes for high energy ultrashort pulse amplification. High gain in a single pass amplification, small B-integral, low heat deposition, high contrast ratio and, especially the extremely broad gain bandwidth with large-size crystals available bring people new hope for over multi-PW level at which the existing Nd:glass systems suffered difficulties. In this paper we present simulation and experimental studies for a high gain optical parametric chirped pulse amplification system which may be used as a preamplifier to replace the current complicated regenerative system or multi-pass Ti:sapphire amplifiers. Investigations on the amplification bandwidth and gain with BBO are performed. Analysis and discussions are also given. (author)

  10. A programmable gain amplifier with a DC offset calibration loop for a direct-conversion WLAN transceiver

    Energy Technology Data Exchange (ETDEWEB)

    Lei Qianqian; Chen Zhiming [Department of Applied Electronics, Xi' an University of Technology, Xi' an 710048 (China); Lin Min; Shi Yin, E-mail: leiqianqian@163.com [Suzhou-CAS Semiconductors Integrated Technology Research Center, Suzhou 215021 (China)

    2011-04-15

    A high-linearity PGA (programmable gain amplifier) with a DC offset calibration loop is proposed. The PGA adopts a differential degeneration structure to vary voltage gain and uses the closed-loop structure including the input op-amps to enhance the linearity. A continuous time feedback based DC offset calibration loop is also designed to solve the DC offset problem. This PGA is fabricated by TSMC 0.13 {mu}m CMOS technology. The measurements show that the receiver PGA (RXPGA) provides a 64 dB gain range with a step of 1 dB, and the transmitter PGA (TXPGA) covers a 16 dB gain. The RXPGA consumes 18 mA and the TXPGA consumes 7 mA (I and Q path) under a 3.3 V supply. The bandwidth of the multi-stage PGA is higher than 20 MHz. In addition, the DCOC (DC offset cancellation) circuit shows 10 kHz of HPCF (high pass cutoff frequency) and the DCOC settling time is less than 0.45 {mu}s. (semiconductor integrated circuits)

  11. Turning value chains into social gains in Southeast Asia | CRDI ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Turning value chains into social gains in Southeast Asia. Global value chains, which now form the largest share of the world's trade, involve producers and enterprises that produce goods as inputs for other producers. In Southeast Asian countries, these industries employ large numbers of low-skilled workers, particularly ...

  12. Electronics/avionics integrity - Definition, measurement and improvement

    Science.gov (United States)

    Kolarik, W.; Rasty, J.; Chen, M.; Kim, Y.

    The authors report on the results obtained from an extensive, three-fold research project: (1) to search the open quality and reliability literature for documented information relative to electronics/avionics integrity; (2) to interpret and evaluate the literature as to significant concepts, strategies, and tools appropriate for use in electronics/avionics product and process integrity efforts; and (3) to develop a list of critical findings and recommendations that will lead to significant progress in product integrity definition, measurement, modeling, and improvements. The research consisted of examining a broad range of trade journals, scientific journals, and technical reports, as well as face-to-face discussions with reliability professionals. Ten significant recommendations have been supported by the research work.

  13. Artificial Material Integrated Ultra-wideband Tapered Slot Antenna for Gain Enhancement with Band Notch Characteristics

    Directory of Open Access Journals (Sweden)

    R. Singha

    2018-04-01

    Full Text Available The gain of the ultra-wideband tapered slot antenna (TSA is enhanced by using broadband artificial material with band notch characteristics. The proposed artificial material unit cell is designed by fabricating non-resonant three S-shaped parallel metallic line on single side of the dielectric substrate which provides a longer current path compared to the parallel-line structure. The proposed S-shaped structure is printed on the top side of the tapered slot antenna in the extended substrate periodically. The effective refractive index of the artificial material is lower than antenna substrate and phase velocity in the region of artificial material is much higher than the other region. Therefore, the proposed artificial material acts like a beam focusing lens. The band notch at 5.5 GHz is achieved by creating a split ring resonator (SRR slot near the balun. The basic and artificial material loaded TSAs are fabricated and the measurement results show that the gain of the basic antenna has been increased by 1.6 dBi. At the same time, the proposed antenna achieves a VSWR below 2 from 3 to 11 GHz except at 5.5 GHz with a notch band from 5.1 to 5.8 GHz for band rejection of wireless local area network (WLAN application.

  14. Workplace clinics: a sign of growing employer interest in wellness.

    Science.gov (United States)

    Tu, Ha T; Boukus, Ellyn R; Cohen, Genna R

    2010-12-01

    Interest in workplace clinics has intensified in recent years, with employers moving well beyond traditional niches of occupational health and minor acute care to offering clinics that provide a full range of wellness and primary care services. Employers view workplace clinics as a tool to contain medical costs, boost productivity and enhance companies' reputations as employers of choice. The potential for clinics to transform primary care delivery through the trusted clinician model holds promise, according to experts interviewed for a new qualitative research study from the Center for Studying Health System Change (HSC). Achieving that model is dependent on gaining employee trust in the clinic, as well as the ability to recruit and retain clinicians with the right qualities--a particular challenge in communities with provider shortages. Even when clinic operations are outsourced to vendors, initial employer involvement--including the identification of the appropriate scope and scale of clinic services--and sustained employer attention over time are critical to clinic success. Measuring the impact of clinics is difficult, and credible evidence on return on investment (ROI) varies widely, with very high ROI claims made by some vendors lacking credibility. While well-designed, well-implemented workplace clinics are likely to achieve positive returns over the long term, expecting clinics to be a game changer in bending the overall health care cost curve may be unrealistic.

  15. Characterization of transient gain x-ray lasers

    International Nuclear Information System (INIS)

    Dunn, J.; Osterheld, A.; Shlyaptsev, V.

    1999-01-01

    We have performed numerical simulations of the transient collisional excitation Ni-like Pd 4d → 4p J = 0 → 1 147 angstrom laser transition recently observed at Lawrence Livermore National Laboratory (LLNL). The high gain ∼35 cm results from the experiment are compared with detailed modeling simulations from the 1-D RADEX code in order to better understand the main physics issues affecting the measured gain and x-ray laser propagation along the plasma column. Simulations indicate that the transient gain lifetime associated with the short pulse pumping and refraction of the x-ray laser beam out of the gain region are the main detrimental effects. Gain lifetimes of ∼7 ps(1/e decay) are inferred from the smoothly changing gain experimental observations and are in good agreement with the simulations. Furthermore, the modeling results indicate the presence of a longer-lived but lower gain later in time associated with the transition from transient to quasi-steady state excitation

  16. Towards integrating environmental performance in divisional performance measurement

    Directory of Open Access Journals (Sweden)

    Collins C Ngwakwe

    2014-08-01

    Full Text Available This paper suggests an integration of environmental performance measurement (EPM into conventional divisional financial performance measures as a catalyst to enhance managers’ drive toward cleaner production and sustainable development. The approach is conceptual and normative; and using a hypothetical firm, it suggests a model to integrate environmental performance measure as an ancillary to conventional divisional financial performance measures. Vroom’s motivation theory and other literature evidence indicate that corporate goals are achievable in an environment where managers’ efforts are recognised and thus rewarded. Consequently the paper suggests that environmentally motivated managers are important to propel corporate sustainability strategy toward desired corporate environmental governance and sustainable economic development. Thus this suggested approach modestly adds to existing environmental management accounting (EMA theory and literature. It is hoped that this paper may provide an agenda for further research toward a practical application of the suggested method in a firm.

  17. The Empirical Evidence on Government Bond Market Integration in East Asia

    Directory of Open Access Journals (Sweden)

    Lian Liu

    2016-03-01

    Full Text Available This research intends to investigate the progress made in East Asian bond market integration thus far. Price-based measures (AAD indicator and beta-convergence measure, quantity-based measures and econometric techniques (co-integration test, error correction model based Granger causality test are employed in the analysis. Even though East Asian government bond markets have become more integrated since 2001, the differentials among the markets still remain significantly high. The bond market integration process seems slow. The convergence of bond markets sped up in 2003 and after the 2008 world financial crisis, implying the important role of government policies in integrating the regional bond markets. East Asian bond market integration may need more government-directed measures.

  18. FIA-automated system used to electrochemically measure nitrite and its interfering chemicals through a 1-2 DAB / Au electrode: gain of sensitivity at upper potentials

    Science.gov (United States)

    Almeida, F. L.; dos Santos Filho, S. G.; Fontes, M. B. A.

    2013-03-01

    The measurement of nitrite and its interfering-chemicals (paracetamol, ascorbic acid and uric acid) was performed employing a Flow-injection Analysis (FIA) system, which was automated using solenoid valves and air-pump. It is very important to quantify nitrite from river water, food and biologic fluids due to its antibacterial capacity in moderated concentrations, or its toxicity for human health even at low concentrations (> 20 μmol L-1 in blood fluids). Electrodes of the electrochemical planar sensor were defined by silk-screen technology. The measuring electrode was made from gold paste covered with 1-2 cis Diaminobenzene (DAB), which allowed good selectivity, linearity, repeatability, stability and optimized gain of sensitivity at 0.5 VAg/AgCl Nafion®117 (6.93 μA mol-1 L mm-2) compared to 0.3 VAg/AgCl Nafion® 117. The reference electrode was obtained from silver/palladium paste modified with chloride and covered with Nafion® 117. The auxiliary electrode was made from platinum paste. It was noteworthy that nitrite response adds to the response of the studied interfering-chemicals and it is predominant for concentrations lower than 175 μmol L-1.

  19. Two-dimensional photonic crystal bandedge laser with hybrid perovskite thin film for optical gain

    Energy Technology Data Exchange (ETDEWEB)

    Cha, Hyungrae [Department of Biophysics and Chemical Biology, Seoul National University, Seoul 08826 (Korea, Republic of); Inter-University Semiconductor Research Center, Seoul National University, Seoul 08826 (Korea, Republic of); Bae, Seunghwan [Department of Materials Science and Engineering, Seoul National University, Seoul 08826 (Korea, Republic of); Lee, Myungjae [Inter-University Semiconductor Research Center, Seoul National University, Seoul 08826 (Korea, Republic of); Department of Physics and Astronomy, Seoul National University, Seoul 08826 (Korea, Republic of); Jeon, Heonsu, E-mail: hsjeon@snu.ac.kr [Department of Biophysics and Chemical Biology, Seoul National University, Seoul 08826 (Korea, Republic of); Inter-University Semiconductor Research Center, Seoul National University, Seoul 08826 (Korea, Republic of); Department of Physics and Astronomy, Seoul National University, Seoul 08826 (Korea, Republic of)

    2016-05-02

    We report optically pumped room temperature single mode laser that contains a thin film of hybrid perovskite, an emerging photonic material, as gain medium. Two-dimensional square lattice photonic crystal (PhC) backbone structure enables single mode laser operation via a photonic bandedge mode, while a thin film of methyl-ammonium lead iodide (CH{sub 3}NH{sub 3}PbI{sub 3}) spin-coated atop provides optical gain for lasing. Two kinds of bandedge modes, Γ and M, are employed, and both devices laser in single mode at similar laser thresholds of ∼200 μJ/cm{sup 2} in pulse energy density. Polarization dependence measurements reveal a clear difference between the two kinds of bandedge lasers: isotropic for the Γ-point laser and highly anisotropic for the M-point laser. These observations are consistent with expected modal properties, confirming that the lasing actions indeed originate from the corresponding PhC bandedge modes.

  20. Measuring cross-border regional integration with composite indicators

    DEFF Research Database (Denmark)

    Makkonen, Teemu

    2016-01-01

    Earlier quantitative studies on cross-border regional integration processes have commonly neglected science, technology and innovation (STI) indicators: even the most notable example of a composite indicator approach to measuring cross-border regional integration, i.e. the Oresund index, lacks...... a sub-category for STI. Consequently, by ignoring cross-border innovation and knowledge flows, the Oresund integration index fails to take into account one of the most important drivers of economic growth in cross-border regions. Therefore, a new composite STI indicator (sub-category) was introduced......-border regions....

  1. Tropical forests are a net carbon source based on aboveground measurements of gain and loss.

    Science.gov (United States)

    Baccini, A; Walker, W; Carvalho, L; Farina, M; Sulla-Menashe, D; Houghton, R A

    2017-10-13

    The carbon balance of tropical ecosystems remains uncertain, with top-down atmospheric studies suggesting an overall sink and bottom-up ecological approaches indicating a modest net source. Here we use 12 years (2003 to 2014) of MODIS pantropical satellite data to quantify net annual changes in the aboveground carbon density of tropical woody live vegetation, providing direct, measurement-based evidence that the world's tropical forests are a net carbon source of 425.2 ± 92.0 teragrams of carbon per year (Tg C year -1 ). This net release of carbon consists of losses of 861.7 ± 80.2 Tg C year -1 and gains of 436.5 ± 31.0 Tg C year -1 Gains result from forest growth; losses result from deforestation and from reductions in carbon density within standing forests (degradation or disturbance), with the latter accounting for 68.9% of overall losses. Copyright © 2017 The Authors, some rights reserved; exclusive licensee American Association for the Advancement of Science. No claim to original U.S. Government Works.

  2. Labor productivity and employment gaps in Sub-Saharan Africa.

    Science.gov (United States)

    McCullough, Ellen B

    2017-02-01

    Drawing on a new set of nationally representative, internationally comparable household surveys, this paper provides an overview of key features of structural transformation - labor allocation and labor productivity - in four African economies. New, micro-based measures of sector labor allocation and cross-sector productivity differentials describe the incentives households face when allocating their labor. These measures are similar to national accounts-based measures that are typically used to characterize structural change. However, because agricultural workers supply far fewer hours of labor per year than do workers in other sectors in all of the countries analyzed, productivity gaps shrink by half, on average, when expressed on a per-hour basis. Underlying the productivity gaps that are prominently reflected in national accounts data are large employment gaps, which call into question the productivity gains that laborers can achieve through structural transformation. Furthermore, agriculture's continued relevance to structural change in Sub-Saharan Africa is highlighted by the strong linkages observed between rural non-farm activities and primary agricultural production.

  3. Measuring fragmentation in dissociative identity disorder: the integration measure and relationship to switching and time in therapy.

    Science.gov (United States)

    Barlow, M Rose; Chu, James A

    2014-01-01

    Some people with dissociative identity disorder (DID) have very little communication or awareness among the parts of their identity, while others experience a great deal of cooperation among alternate identities. Previous research on this topic has been sparse. Currently, there is no empirical measure of integration versus fragmentation in a person with DID. In this study, we report the development of such a measure. The goal of this study was to pilot the integration measure (IM) and to address its psychometric properties and relationships to other measures. The IM is the first standardized measure of integration in DID. Eleven women with DID participated in an experiment that included a variety of tasks. They filled out questionnaires about trauma and dissociation as well as the IM. They also provided verbal results about switching among alternate identities during the study sessions. Participants switched among identities an average of 5.8 times during the first session, and switching was highly correlated with trauma. Integration was related to switching, though this relationship may be non-linear. Integration was not related to time in psychotherapy. The IM provides a useful beginning to quantify and study integration and fragmentation in DID. Directions for future research are also discussed, including expanding the IM from this pilot. The IM may be useful in treatment settings to assess progress or change over time.

  4. Assessment of Learning Gains in a Flipped Biochemistry Classroom

    Science.gov (United States)

    Ojennus, Deanna Dahlke

    2016-01-01

    The flipped classroom has become an increasingly popular pedagogical approach to teaching and learning. In this study, learning gains were assessed in a flipped biochemistry course and compared to gains in a traditional lecture. Although measured learning gains were not significantly different between the two courses, student perception of…

  5. Mandatory Integration Measures and Differential Inclusion. The Italian Case

    NARCIS (Netherlands)

    Cuttitta, P.

    2016-01-01

    Since 2012 migrants arriving regularly in Italy must sign an integration agreement and declare their agreement with a ‘Charter of the values’. Insufficient integration (measured through a point-based system) results in deportation. While the point-based system discriminates against the poor, the

  6. Reduction the effects of opamp finite gain and offset voltage in LDI termination with a minus one half delay of SC ladder filters

    Directory of Open Access Journals (Sweden)

    Radev Nikolay A.

    2006-01-01

    Full Text Available In this paper a combined approach for reducing the effects of op amp imperfections (finite gain A and offset voltage VOS in first-order SC cell, realizing LDI (loss less discrete integrator termination with a minus one half delay is presented. First, the conventional integrator is replaced with gain- and offset-compensated (GOC integrator. Next, the gain errors m(ω and the phase errors θ(ω are further reduced by using the precise op amp gain approach in the GOC structure. The variation of the dc gain A from its nominal value A0 is taken into account.

  7. Bayesian Integrated Data Analysis of Fast-Ion Measurements by Velocity-Space Tomography

    DEFF Research Database (Denmark)

    Salewski, M.; Nocente, M.; Jacobsen, A.S.

    2018-01-01

    Bayesian integrated data analysis combines measurements from different diagnostics to jointly measure plasma parameters of interest such as temperatures, densities, and drift velocities. Integrated data analysis of fast-ion measurements has long been hampered by the complexity of the strongly non...... framework. The implementation for different types of diagnostics as well as the uncertainties are discussed, and we highlight the importance of integrated data analysis of all available detectors....

  8. Competence with fractions predicts gains in mathematics achievement.

    Science.gov (United States)

    Bailey, Drew H; Hoard, Mary K; Nugent, Lara; Geary, David C

    2012-11-01

    Competence with fractions predicts later mathematics achievement, but the codevelopmental pattern between fractions knowledge and mathematics achievement is not well understood. We assessed this codevelopment through examination of the cross-lagged relation between a measure of conceptual knowledge of fractions and mathematics achievement in sixth and seventh grades (N=212). The cross-lagged effects indicated that performance on the sixth grade fractions concepts measure predicted 1-year gains in mathematics achievement (ß=.14, pmathematics achievement did not predict gains on the fractions concepts measure (ß=.03, p>.50). In a follow-up assessment, we demonstrated that measures of fluency with computational fractions significantly predicted seventh grade mathematics achievement above and beyond the influence of fluency in computational whole number arithmetic, performance on number fluency and number line tasks, central executive span, and intelligence. Results provide empirical support for the hypothesis that competence with fractions underlies, in part, subsequent gains in mathematics achievement. Copyright © 2012 Elsevier Inc. All rights reserved.

  9. Utilizing time-frequency amplitude and phase synchrony measure to assess feedback processing in a gambling task.

    Science.gov (United States)

    Watts, Adreanna T M; Tootell, Anne V; Fix, Spencer T; Aviyente, Selin; Bernat, Edward M

    2018-04-29

    The neurophysiological mechanisms involved in the evaluation of performance feedback have been widely studied in the ERP literature over the past twenty years, but understanding has been limited by the use of traditional time-domain amplitude analytic approaches. Gambling outcome valence has been identified as an important factor modulating event-related potential (ERP) components, most notably the feedback negativity (FN). Recent work employing time-frequency analysis has shown that processes indexed by the FN are confounded in the time-domain and can be better represented as separable feedback-related processes in the theta (3-7 Hz) and delta (0-3 Hz) frequency bands. In addition to time-frequency amplitude analysis, phase synchrony measures have begun to further our understanding of performance evaluation by revealing how feedback information is processed within and between various brain regions. The current study aimed to provide an integrative assessment of time-frequency amplitude, inter-trial phase synchrony, and inter-channel phase synchrony changes following monetary feedback in a gambling task. Results revealed that time-frequency amplitude activity explained separable loss and gain processes confounded in the time-domain. Furthermore, phase synchrony measures explained unique variance above and beyond amplitude measures and demonstrated enhanced functional integration between medial prefrontal and bilateral frontal, motor, and occipital regions for loss relative to gain feedback. These findings demonstrate the utility of assessing time-frequency amplitude, inter-trial phase synchrony, and inter-channel phase synchrony together to better elucidate the neurophysiology of feedback processing. Copyright © 2017. Published by Elsevier B.V.

  10. In search of an integrative measure of functioning.

    Science.gov (United States)

    Madden, Rosamond H; Glozier, Nick; Fortune, Nicola; Dyson, Maree; Gilroy, John; Bundy, Anita; Llewellyn, Gwynnyth; Salvador-Carulla, Luis; Lukersmith, Sue; Mpofu, Elias; Madden, Richard

    2015-05-26

    International trends towards people-centred, integrative care and support require any measurement of functioning and disability to meet multiple aims. The information requirements of two major Australian programs for disability and rehabilitation are outlined, and the findings of two searches for suitable measures of functioning and disability are analysed. Over 30 current measures of functioning were evaluated in each search. Neither search found a generic measure of functioning suitable for these multibillion dollar programs, relevant to a wide range of people with a variety of health conditions and functioning experiences, and capable of indicating support needs, associated costs, progress and outcomes. This unsuccessful outcome has implications internationally for policy-relevant information for disability, rehabilitation and related programs. The paper outlines the features of an Integrative Measure of Functioning (IMF) based on the concepts of functioning and environmental factors in the International Classification of Functioning, Disability and Health (ICF). An IMF would be applicable across a variety of health conditions, settings and purposes, ranging from individual assessment to public health. An IMF could deliver person-centred, policy-relevant information for a range of programs, promoting harmonised language and measurement and supporting international trends in human services and public health.

  11. Peer Teaching in the Food Chemistry Laboratory: Student-produced Experiments, Peer and Audio Feedback and Integration of Employability

    OpenAIRE

    Dunne, Julie

    2014-01-01

    This paper describes the author’s experience over the last several years of implementing an alternative Food Chemistry laboratory practical for a group of third-year BSc Nutraceuticals students. The initial main objectives were to prepare students for the more independent final-year research project; to incorporate innovative approaches to feedback; and to integrate key employability skills into the curriculum. These were achieved through building the skills required to ultimately allow stude...

  12. Can LENR Energy Gains Exceed 1000?

    Science.gov (United States)

    Nagel, David J.

    2011-03-01

    Energy gain is defined as the energy realized from reactions divided by the energy required to produce those reactions. Low Energy Nuclear Reactions (LENR) have already been measured to significantly exceed the energy gain of 10 projected from ITER,possibly 15 years from now. Electrochemical experiments using the Pd-D system have shown energy gains exceeding 10. Gas phase experiments with the Ni-H system were reported to yield energy gains of over 100. Neither of these reports has been adequately verified or reproduced. However, the question in the title still deserves consideration. If, as thought by many, it is possible to trigger nuclear reactions that yield MeV energies with chemical energies of the order of eV, then the most optimistic expectation is that LENR gains could approach one million. Hence, the very tentative answer to the question above is yes. However, if LENR could be initiated with some energy cost, and then continue to ``burn,'' very high energy gains might be realized. Consider a match and a pile of dry logs. The phenomenon termed ``heat after death'' will be examined to see if it might be the initial evidence for nuclear ``burning.''

  13. Sound pressure gain produced by the human middle ear.

    Science.gov (United States)

    Kurokawa, H; Goode, R L

    1995-10-01

    The acoustic function of the middle ear is to match sound passing from the low impedance of air to the high impedance of cochlear fluid. Little information is available on the actual middle ear pressure gain in human beings. This article describes experiments on middle ear pressure gain in six fresh human temporal bones. Stapes footplate displacement and phase were measured with a laser Doppler vibrometer before and after removal of the tympanic membrane, malleus, and incus. Acoustic insulation of the round window with clay was performed. Umbo displacement was also measured before tympanic membrane removal to assess baseline tympanic membrane function. The middle ear has its major gain in the lower frequencies, with a peak near 0.9 kHz. The mean gain was 23.0 dB below 1.0 kHz, the resonant frequency of the middle ear; the mean peak gain was 26.6 dB. Above 1.0 kHz, the second pressure gain decreased at a rate of -8.6 dB/octave, with a mean gain of 6.5 dB at 4.0 kHz. Only a small amount of gain was present above 7.0 kHz. Significant individual differences in pressure gain were found between ears that appeared related to variations in tympanic membrane function and not to variations in cochlear impedance.

  14. Positive gain measurements on the 3350-A continuum band of Hg2

    International Nuclear Information System (INIS)

    Schlie, L.A.; Guenther, B.D.; Rathge, R.D.

    1976-01-01

    A He-Cd + laser operating at 3250 A and an Ar + laser at 3511 A and 3638 A have been used to probe for gain on both sides of the Hg 2 3350-A (A 3 1/subu/→X 1 Σ/subg/ + ) continuum band in Hg vapor at a pressure of 3.75 atm that was pumped by a 1.5-MeV 600-J 20-ns electron beam. This letter presents the first observation of positive gain on this 3350-A band of Hg 2 . The results indicate that the stimulated emission cross section for this band is larger than any associated photoionization process in the Hg vapor and has a magnitude of approximately 10 -18 cm 2 . Also, raising the temperature of the vapor above its saturation value increases the maximum value and duration of the observed gain, indicating that the population of the upper level of this transition is being fed by a temperature-dependent internal energy reservoir in the Hg

  15. Brain Gain am Beispiel Österreich

    Directory of Open Access Journals (Sweden)

    Aschbacher Christine

    2016-06-01

    Full Text Available BrainGain is a common trend within the last ten years in Europe and all-over the world. Managers, key players and scientists are allowed to choose wherever they want to work in the world. As there is a lack of qualified individuals for companies and universities, BrainGain has become a necessity, and mostly – the higher educated individuals are moving away according to a better offer elsewhere in the world. Therefore, a lot of expats are moving around with their families. Many times, the lack of integration at the current place, country or city, is the critical success factor for staying or leaving. Furthermore, if the family does not feel happy in the current location, then the manager or scientist will move away or return home and the investment will be lost.

  16. Measuring fragmentation in dissociative identity disorder: the integration measure and relationship to switching and time in therapy

    Directory of Open Access Journals (Sweden)

    Margaret Rose Barlow

    2014-01-01

    Full Text Available Background: Some people with dissociative identity disorder (DID have very little communication or awareness among the parts of their identity, while others experience a great deal of cooperation among alternate identities. Previous research on this topic has been sparse. Currently, there is no empirical measure of integration versus fragmentation in a person with DID. In this study, we report the development of such a measure. Objective: The goal of this study was to pilot the integration measure (IM and to address its psychometric properties and relationships to other measures. The IM is the first standardized measure of integration in DID. Method: Eleven women with DID participated in an experiment that included a variety of tasks. They filled out questionnaires about trauma and dissociation as well as the IM. They also provided verbal results about switching among alternate identities during the study sessions. Results: Participants switched among identities an average of 5.8 times during the first session, and switching was highly correlated with trauma. Integration was related to switching, though this relationship may be non-linear. Integration was not related to time in psychotherapy. Conclusions: The IM provides a useful beginning to quantify and study integration and fragmentation in DID. Directions for future research are also discussed, including expanding the IM from this pilot. The IM may be useful in treatment settings to assess progress or change over time.

  17. Cost-effectiveness of supported employment adapted for people with affective disorders.

    Science.gov (United States)

    Saha, Sanjib; Bejerholm, Ulrika; Gerdtham, Ulf-G; Jarl, Johan

    2018-04-01

    The individual enabling and support (IES) model was effective in gaining competitive employment for people with affective disorders compared with traditional vocational rehabilitation (TVR) services in a randomized controlled trial in a Swedish setting. The object of this study is to perform a cost-effectiveness analysis of IES comparing to TVR. We considered the costs of intervention and productivity gain due to increased competitive employment. We estimated quality of life using EuroQol 5 Dimension (EQ-5D) and Manchester Short Assessment of Quality of Life (MANSA) scale. EQ-5D was translated into quality-adjusted life-years (QALY), using the UK, Danish, and Swedish tariffs. We performed the analysis from a societal perspective with a one-year timeframe. The cost of IES was €7247 lower per person per year (2014 prices) compared to TVR. There were no significant differences in QALY improvement within or between groups. However, quality of life measured by the MANSA scale significantly improved over the study period in IES. Besides the small sample size, details on the intervention costs for both IES and TVR group were unavailable and had to be obtained from external sources. Implementation of IES for people with affective disorders is most likely cost-saving and is potentially even dominating TVR, although a larger trial is required to establish this.

  18. Assessment of learning gains in a flipped biochemistry classroom.

    Science.gov (United States)

    Ojennus, Deanna Dahlke

    2016-01-01

    The flipped classroom has become an increasingly popular pedagogical approach to teaching and learning. In this study, learning gains were assessed in a flipped biochemistry course and compared to gains in a traditional lecture. Although measured learning gains were not significantly different between the two courses, student perception of learning gains did differ and indicates a higher level of satisfaction with the flipped lecture format. © 2015 The International Union of Biochemistry and Molecular Biology.

  19. Seamless variation of isometric and anisometric dynamical integrity measures in basins's erosion

    Science.gov (United States)

    Belardinelli, P.; Lenci, S.; Rega, G.

    2018-03-01

    Anisometric integrity measures defined as improvement and generalization of two existing measures (LIM, local integrity measure, and IF, integrity factor) of the extent and compactness of basins of attraction are introduced. Non-equidistant measures make it possible to account for inhomogeneous sensitivities of the state space variables to perturbations, thus permitting a more confident and targeted identification of the safe regions. All four measures are used for a global dynamics analysis of the twin-well Duffing oscillator, which is performed by considering a nearly continuous variation of a governing control parameter, thanks to the use of parallel computation allowing reasonable CPU time. This improves literature results based on finite (and commonly large) variations of the parameter, due to computational constraints. The seamless evolution of key integrity measures highlights the fine aspects of the erosion of the safe domain with respect to the increasing forcing amplitude.

  20. Renyi information gain on quantum key

    International Nuclear Information System (INIS)

    Brandt, Howard E

    2007-01-01

    The concept of maximum Renyi information gain from quantum key is important in eavesdropping and security analyses of quantum key distribution. It is particularly useful in the design optimization of eavesdropping probes. The present work reviews the quantitative measure of Renyi information gain, its optimization, and application to the design of eavesdropping probes in which single-photon probe states become optimally entangled with the signal states on their way between the legitimate transmitter and receiver

  1. Actinides integral measurements on FCA assemblies

    International Nuclear Information System (INIS)

    Mukaiyama, Takehiko; Okajima, Shigeaki

    1984-01-01

    Actinide integral measurements were performed on eight assemblies of FCA where neutron energy spectra were shifted systematically from soft to hard in order to evaluate and modify the nuclear cross section data of major actinides. Experimental values on actinide fission rates and sample reactivity worths are compared with the calculated values using JENDL-2 and ENDF/B-V (or IV) data sets. (author)

  2. Experiences in integrated leak rate measurements

    International Nuclear Information System (INIS)

    Shirk, R.E.

    1982-01-01

    During a hypothetical design basis accident for nuclear power plants, the reactor containment system is relied upon to maintain radioactive exposure limits below acceptable limits. Integrated leak rate testing is a means of verifying that the leakage of radioactivity material from the reactor containment will be below allowable limits. Leakage rate computations are based on the ideal gas law. The absolute method of leakage rate testing utilizing mass point method of data analysis is recommended. Integrated leak rate testing data is obtained from pressure, drybulb temperature, dewpoint temperature, and flow measuring systems. Test data does not support the usual leakage (flow) - pressure square root relationship. The major source of potential leakage from the reactor containment is reactor containment isolation valves

  3. Aging, Economic Insecurity, and Employment: Which Measures Would Encourage Older Workers to Stay Longer in the Labour Market?

    Directory of Open Access Journals (Sweden)

    Diane-Gabrielle Tremblay

    2010-01-01

    Full Text Available In the present context of aging populations, the question of how to support older workers who want to stay in employment longer is of particular importance, especially from a social justice perspective with regards to income. The challenges faced by organizations and governments are unprecedented. Interesting conclusions can be drawn from our research with regard to these challenges. First of all, the perception of retirement appears more or less unchanged over the years and remains very positive. Consequently, one of the barriers to the employment of older workers may be the image of retirement itself, since it is still perceived as a gift or a right. Secondly, our results confirm that forcing people to stay longer in the labour market is a largely unpopular measure. Consequently, if public retirement plans offer limited income, governments and organizations should adopt a more voluntary approach to encourage older workers to stay in employment longer for a better income. Our results highlight the importance of the sector and type of job in the measures or incentives that could encourage older workers to stay in employment longer. Consequently, governments and organizations will probably have to adopt a contingent approach; i.e., all incentives do not necessarily fit all jobs or all sectors and social justice would require this be taken into account. We identified three sets of measures that could encourage older workers to stay in employment longer, and thus have access to better economic security: the reduction of working time, the flexibility of working time, and the individualization of retirement options and working time. The progressive reduction of their working time appears most interesting to our respondents. These measures appear to favour social justice in terms of income and right to employment at the end of active careers.  

  4. Aging, Economic Insecurity, and Employment: Which Measures Would Encourage Older Workers to Stay Longer in the Labour Market?

    Directory of Open Access Journals (Sweden)

    Émilie Genin

    2009-12-01

    Full Text Available In the present context of aging populations, the question of how to support older workers who want to stay in employment longer is of particular importance, especially from a social justice perspective with regards to income. The challenges faced by organizations and governments are unprecedented. Interesting conclusions can be drawn from our research with regard to these challenges. First of all, the perception of retirement appears more or less unchanged over the years and remains very positive. Consequently, one of the barriers to the employment of older workers may be the image of retirement itself, since it is still perceived as a gift or a right. Secondly, our results confirm that forcing people to stay longer in the labour market is a largely unpopular measure. Consequently, if public retirement plans offer limited income, governments and organizations should adopt a more voluntary approach to encourage older workers to stay in employment longer for a better income. Our results highlight the importance of the sector and type of job in the measures or incentives that could encourage older workers to stay in employment longer. Consequently, governments and organizations will probably have to adopt a contingent approach; i.e., all incentives do not necessarily fit all jobs or all sectors and social justice would require this be taken into account. We identified three sets of measures that could encourage older workers to stay in employment longer, and thus have access to better economic security: the reduction of working time, the flexibility of working time, and the individualization of retirement options and working time. The progressive reduction of their working time appears most interesting to our respondents. These measures appear to favour social justice in terms of income and right to employment at the end of active careers.  

  5. Enhancing genetic gain in the era of molecular breeding.

    Science.gov (United States)

    Xu, Yunbi; Li, Ping; Zou, Cheng; Lu, Yanli; Xie, Chuanxiao; Zhang, Xuecai; Prasanna, Boddupalli M; Olsen, Michael S

    2017-05-17

    As one of the important concepts in conventional quantitative genetics and breeding, genetic gain can be defined as the amount of increase in performance that is achieved annually through artificial selection. To develop pro ducts that meet the increasing demand of mankind, especially for food and feed, in addition to various industrial uses, breeders are challenged to enhance the potential of genetic gain continuously, at ever higher rates, while they close the gaps that remain between the yield potential in breeders' demonstration trials and the actual yield in farmers' fields. Factors affecting genetic gain include genetic variation available in breeding materials, heritability for traits of interest, selection intensity, and the time required to complete a breeding cycle. Genetic gain can be improved through enhancing the potential and closing the gaps, which has been evolving and complemented with modern breeding techniques and platforms, mainly driven by molecular and genomic tools, combined with improved agronomic practice. Several key strategies are reviewed in this article. Favorable genetic variation can be unlocked and created through molecular and genomic approaches including mutation, gene mapping and discovery, and transgene and genome editing. Estimation of heritability can be improved by refining field experiments through well-controlled and precisely assayed environmental factors or envirotyping, particularly for understanding and controlling spatial heterogeneity at the field level. Selection intensity can be significantly heightened through improvements in the scale and precision of genotyping and phenotyping. The breeding cycle time can be shortened by accelerating breeding procedures through integrated breeding approaches such as marker-assisted selection and doubled haploid development. All the strategies can be integrated with other widely used conventional approaches in breeding programs to enhance genetic gain. More transdisciplinary

  6. Building integrated care systems: a case study of Bidasoa Integrated Health Organisation

    Directory of Open Access Journals (Sweden)

    Nuria Toro Polanco

    2015-06-01

    Full Text Available Introduction: This paper analyses the implementation of integrated care policies in the Basque Country through the deployment of an Integrated Health Organisation in Bidasoa area during the period 2011–2014. Structural, functional and clinical integration policies have been employed with the aim to deliver integrated and person-centred care for patients, especially for those living with chronic conditions.Methods: This organisational case study used multiple data sources and methods in a pragmatic and reflexive manner to build a picture of the organisational development over a 4-year period. In order to measure the progress of integration three concepts have been measured: (i readiness for chronicity measured with Assessment of Readiness for Chronicity in Healthcare Organisations tool; (ii collaboration between clinicians from different care levels measured with the D'Amour Questionnaire, and (iii overall impact of integration through several indicators based on the Triple Aim Framework.Results: The measurement of organisational readiness for chronicity showed improvements in five of the six areas under evaluation. Similarly the collaboration between professionals of different care levels showed a steady improvement in each of the 10 items. Furthermore, the Triple Aim-based indicators showed a better experience of care in terms of patients’ perceptions of care coordination; a reduction in hospital utilisation, particularly for patients with complex chronic conditions; and cost-containment in terms of per capita expenditure.Conclusion: There is a significant amount of data that shows that Bidasoa Integrated Health Organisation has progressed in terms of delivering integrated care for chronic conditions with a positive impact on several Triple Aim outcomes.

  7. Building integrated care systems: a case study of Bidasoa Integrated Health Organisation

    Directory of Open Access Journals (Sweden)

    Nuria Toro Polanco

    2015-06-01

    Full Text Available Introduction: This paper analyses the implementation of integrated care policies in the Basque Country through the deployment of an Integrated Health Organisation in Bidasoa area during the period 2011–2014. Structural, functional and clinical integration policies have been employed with the aim to deliver integrated and person-centred care for patients, especially for those living with chronic conditions. Methods: This organisational case study used multiple data sources and methods in a pragmatic and reflexive manner to build a picture of the organisational development over a 4-year period. In order to measure the progress of integration three concepts have been measured: (i readiness for chronicity measured with Assessment of Readiness for Chronicity in Healthcare Organisations tool; (ii collaboration between clinicians from different care levels measured with the D'Amour Questionnaire, and (iii overall impact of integration through several indicators based on the Triple Aim Framework. Results: The measurement of organisational readiness for chronicity showed improvements in five of the six areas under evaluation. Similarly the collaboration between professionals of different care levels showed a steady improvement in each of the 10 items. Furthermore, the Triple Aim-based indicators showed a better experience of care in terms of patients’ perceptions of care coordination; a reduction in hospital utilisation, particularly for patients with complex chronic conditions; and cost-containment in terms of per capita expenditure. Conclusion: There is a significant amount of data that shows that Bidasoa Integrated Health Organisation has progressed in terms of delivering integrated care for chronic conditions with a positive impact on several Triple Aim outcomes.

  8. Effectiveness of Integration and Re-Integration into Work Strategies for Persons with Chronic Conditions: A Systematic Review of European Strategies

    Directory of Open Access Journals (Sweden)

    Carla Sabariego

    2018-03-01

    Full Text Available Due to low employment rates associated to chronic conditions in Europe, it is essential to foster effective integration and re-integration into work strategies. The objective of this systematic review is to summarize the evidence on the effectiveness of strategies for integration and re-integration to work for persons with chronic diseases or with musculoskeletal disorders, implemented in Europe in the past five years. A systematic search was conducted in MedLine, PsycINFO, CDR-HTA, CDR-DARE and Cochrane Systematic Reviews. Overall, 32 relevant publications were identified. Of these, 21 were considered eligible after a methodological assessment and included. Positive changes in employment status, return to work and sick leave outcomes were achieved with graded sickness-absence certificates, part-time sick leave, early ergonomic interventions for back pain, disability evaluation followed by information and advice, and with multidisciplinary, coordinated and tailored return to work interventions. Additionally, a positive association between the co-existence of active labour market policies to promote employment and passive support measures (e.g., pensions or benefits and the probability of finding a job was observed. Research on the evaluation of the effectiveness of strategies targeting integration and re-integration into work for persons with chronic health conditions needs, however, to be improved and strengthened.

  9. Effectiveness of Integration and Re-Integration into Work Strategies for Persons with Chronic Conditions: A Systematic Review of European Strategies.

    Science.gov (United States)

    Sabariego, Carla; Coenen, Michaela; Ito, Elizabeth; Fheodoroff, Klemens; Scaratti, Chiara; Leonardi, Matilde; Vlachou, Anastasia; Stavroussi, Panayiota; Brecelj, Valentina; Kovačič, Dare S; Esteban, Eva

    2018-03-19

    Due to low employment rates associated to chronic conditions in Europe, it is essential to foster effective integration and re-integration into work strategies. The objective of this systematic review is to summarize the evidence on the effectiveness of strategies for integration and re-integration to work for persons with chronic diseases or with musculoskeletal disorders, implemented in Europe in the past five years. A systematic search was conducted in MedLine, PsycINFO, CDR-HTA, CDR-DARE and Cochrane Systematic Reviews. Overall, 32 relevant publications were identified. Of these, 21 were considered eligible after a methodological assessment and included. Positive changes in employment status, return to work and sick leave outcomes were achieved with graded sickness-absence certificates, part-time sick leave, early ergonomic interventions for back pain, disability evaluation followed by information and advice, and with multidisciplinary, coordinated and tailored return to work interventions. Additionally, a positive association between the co-existence of active labour market policies to promote employment and passive support measures (e.g., pensions or benefits) and the probability of finding a job was observed. Research on the evaluation of the effectiveness of strategies targeting integration and re-integration into work for persons with chronic health conditions needs, however, to be improved and strengthened.

  10. 2-LP mode few-mode fiber amplifier employing ring-core erbium-doped fiber.

    Science.gov (United States)

    Ono, Hirotaka; Hosokawa, Tsukasa; Ichii, Kentaro; Matsuo, Shoichiro; Nasu, Hitoshi; Yamada, Makoto

    2015-10-19

    A fiber amplifier supporting 2 LP modes that employs a ring-core erbium-doped fiber (RC-EDF) is investigated to reduce differential modal gain (DMG). The inner and outer radii of the ring-core of the RC-EDF are clarified for 2-LP mode operation of the amplifier, and are optimized to reduce the DMG. It is shown that using the overlap integral between the erbium-doped core area and the signal power mode distribution is a good way to optimize the inner and outer radii of the ring-core of the RC-EDF and thus minimize the DMG. A fabricated RC-EDF and a constructed 2-LP mode EDFA are described and a small DMG of around 1 dB is realized for LP01, LP11 and LP21 pumping.

  11. Integration of Error Compensation of Coordinate Measuring Machines into Feature Measurement: Part I—Model Development

    Science.gov (United States)

    Calvo, Roque; D’Amato, Roberto; Gómez, Emilio; Domingo, Rosario

    2016-01-01

    The development of an error compensation model for coordinate measuring machines (CMMs) and its integration into feature measurement is presented. CMMs are widespread and dependable instruments in industry and laboratories for dimensional measurement. From the tip probe sensor to the machine display, there is a complex transformation of probed point coordinates through the geometrical feature model that makes the assessment of accuracy and uncertainty measurement results difficult. Therefore, error compensation is not standardized, conversely to other simpler instruments. Detailed coordinate error compensation models are generally based on CMM as a rigid-body and it requires a detailed mapping of the CMM’s behavior. In this paper a new model type of error compensation is proposed. It evaluates the error from the vectorial composition of length error by axis and its integration into the geometrical measurement model. The non-explained variability by the model is incorporated into the uncertainty budget. Model parameters are analyzed and linked to the geometrical errors and uncertainty of CMM response. Next, the outstanding measurement models of flatness, angle, and roundness are developed. The proposed models are useful for measurement improvement with easy integration into CMM signal processing, in particular in industrial environments where built-in solutions are sought. A battery of implementation tests are presented in Part II, where the experimental endorsement of the model is included. PMID:27690052

  12. Integration of Error Compensation of Coordinate Measuring Machines into Feature Measurement: Part I—Model Development

    Directory of Open Access Journals (Sweden)

    Roque Calvo

    2016-09-01

    Full Text Available The development of an error compensation model for coordinate measuring machines (CMMs and its integration into feature measurement is presented. CMMs are widespread and dependable instruments in industry and laboratories for dimensional measurement. From the tip probe sensor to the machine display, there is a complex transformation of probed point coordinates through the geometrical feature model that makes the assessment of accuracy and uncertainty measurement results difficult. Therefore, error compensation is not standardized, conversely to other simpler instruments. Detailed coordinate error compensation models are generally based on CMM as a rigid-body and it requires a detailed mapping of the CMM’s behavior. In this paper a new model type of error compensation is proposed. It evaluates the error from the vectorial composition of length error by axis and its integration into the geometrical measurement model. The non-explained variability by the model is incorporated into the uncertainty budget. Model parameters are analyzed and linked to the geometrical errors and uncertainty of CMM response. Next, the outstanding measurement models of flatness, angle, and roundness are developed. The proposed models are useful for measurement improvement with easy integration into CMM signal processing, in particular in industrial environments where built-in solutions are sought. A battery of implementation tests are presented in Part II, where the experimental endorsement of the model is included.

  13. Virtual Placements to Develop Employability Skills for Civil and Environmental Engineering Students

    Science.gov (United States)

    Paul, Parneet

    2015-01-01

    This project work addresses the crucial need to encourage undergraduate civil and environmental engineering students to gain employment skills and training right from the start of their studies so that their overall employability increases; their confidence level in networking with industry and within the workplace increases; and so that they are…

  14. Integrating measuring uncertainty of tactile and optical coordinate measuring machines in the process capability assessment of micro injection moulding

    DEFF Research Database (Denmark)

    Tosello, Guido; Hansen, Hans Nørgaard; Gasparin, Stefania

    2010-01-01

    Process capability of micro injection moulding was investigated in this paper by calculating the Cp and Cpk statistics. Uncertainty of both optical and tactile measuring systems employed in the quality control of micro injection moulded products was assessed and compared with the specified...... tolerances. Limits in terms of manufacturing process capability as well as of suitability of such measuring systems when employed for micro production inspection were quantitatively determined....

  15. 3-D numerical analysis of a high-gain free-electron laser

    International Nuclear Information System (INIS)

    Gallardo, J.C.

    1988-01-01

    We present a novel approach to the 3-dimensional high-gain free- electron laser amplifier problem. The method allows us to write the laser field as an integral equation which can be efficiently and accurately evaluated on a small computer. The model is general enough to allow the inclusion of various initial electron beam distributions to study the gain reduction mechanism and its dependence on the physical parameters. 16 refs., 8 figs., 1 tab

  16. Semipolar InGaN quantum-well laser diode with integrated amplifier for visible light communications

    KAUST Repository

    Shen, Chao

    2018-02-14

    GaN-based semiconductor optical amplifier (SOA) and its integration with laser diode (LD) is an essential building block yet to be demonstrated for III-nitride photonic integrated circuits (PICs) at visible wavelength. This paper presents the InGaN/GaN quantum well (QW) based dual-section LD consisting of integrated amplifier and laser gain regions fabricated on a semipolar GaN substrate. The threshold current in the laser gain region was favorably reduced from 229mA to 135mA at SOA driving voltages, VSOA, of 0V and 6.25V, respectively. The amplification effect was measured based on a large gain of 5.7 dB at VSOA = 6.25V from the increased optical output power of 8.2 mW to 30.5 mW. Such integrated amplifier can be modulated to achieve Gbps data communication using on-off keying technique. The monolithically integrated amplifier-LD paves the way towards the III-nitride on-chip photonic system, providing a compact, low-cost, and multi-functional solution for applications such as smart lighting and visible light communications.

  17. Semipolar InGaN quantum-well laser diode with integrated amplifier for visible light communications

    KAUST Repository

    Shen, Chao; Ng, Tien Khee; Lee, Changmin; Nakamura, Shuji; Speck, James S.; DenBaars, Steven P.; Alyamani, Ahmed Y.; El-Desouki, Munir M.; Ooi, Boon S.

    2018-01-01

    GaN-based semiconductor optical amplifier (SOA) and its integration with laser diode (LD) is an essential building block yet to be demonstrated for III-nitride photonic integrated circuits (PICs) at visible wavelength. This paper presents the InGaN/GaN quantum well (QW) based dual-section LD consisting of integrated amplifier and laser gain regions fabricated on a semipolar GaN substrate. The threshold current in the laser gain region was favorably reduced from 229mA to 135mA at SOA driving voltages, VSOA, of 0V and 6.25V, respectively. The amplification effect was measured based on a large gain of 5.7 dB at VSOA = 6.25V from the increased optical output power of 8.2 mW to 30.5 mW. Such integrated amplifier can be modulated to achieve Gbps data communication using on-off keying technique. The monolithically integrated amplifier-LD paves the way towards the III-nitride on-chip photonic system, providing a compact, low-cost, and multi-functional solution for applications such as smart lighting and visible light communications.

  18. Path integral measure for gravitational interactions

    Directory of Open Access Journals (Sweden)

    Kazuo Fujikawa

    1983-10-01

    Full Text Available It is pointed out that the path-integral variables as well as the local measure for gravitational interactions are uniquely specified if one imposes the anomaly-free condition on the Becchi-Rouet-Stora supersymmetry associated with general coordinate transformations. This prescription is briefly illustrated for the Einstein gravity and supergravity in four space-time dimensions and the relativistic string theory in two dimensions.

  19. In Search of an Integrative Measure of Functioning

    Directory of Open Access Journals (Sweden)

    Rosamond H. Madden

    2015-05-01

    Full Text Available International trends towards people-centred, integrative care and support require any measurement of functioning and disability to meet multiple aims. The information requirements of two major Australian programs for disability and rehabilitation are outlined, and the findings of two searches for suitable measures of functioning and disability are analysed. Over 30 current measures of functioning were evaluated in each search. Neither search found a generic measure of functioning suitable for these multibillion dollar programs, relevant to a wide range of people with a variety of health conditions and functioning experiences, and capable of indicating support needs, associated costs, progress and outcomes. This unsuccessful outcome has implications internationally for policy-relevant information for disability, rehabilitation and related programs. The paper outlines the features of an Integrative Measure of Functioning (IMF based on the concepts of functioning and environmental factors in the International Classification of Functioning, Disability and Health (ICF. An IMF would be applicable across a variety of health conditions, settings and purposes, ranging from individual assessment to public health. An IMF could deliver person-centred, policy-relevant information for a range of programs, promoting harmonised language and measurement and supporting international trends in human services and public health.

  20. Questionnaire-based person trip visualization and its integration to quantitative measurements in Myanmar

    Science.gov (United States)

    Kimijiama, S.; Nagai, M.

    2016-06-01

    With telecommunication development in Myanmar, person trip survey is supposed to shift from conversational questionnaire to GPS survey. Integration of both historical questionnaire data to GPS survey and visualizing them are very important to evaluate chronological trip changes with socio-economic and environmental events. The objectives of this paper are to: (a) visualize questionnaire-based person trip data, (b) compare the errors between questionnaire and GPS data sets with respect to sex and age and (c) assess the trip behaviour in time-series. Totally, 345 individual respondents were selected through random stratification to assess person trip using a questionnaire and GPS survey for each. Conversion of trip information such as a destination from the questionnaires was conducted by using GIS. The results show that errors between the two data sets in the number of trips, total trip distance and total trip duration are 25.5%, 33.2% and 37.2%, respectively. The smaller errors are found among working-age females mainly employed with the project-related activities generated by foreign investment. The trip distant was yearly increased. The study concluded that visualization of questionnaire-based person trip data and integrating them to current quantitative measurements are very useful to explore historical trip changes and understand impacts from socio-economic events.

  1. The effect of holiday weight gain on body weight.

    Science.gov (United States)

    Schoeller, Dale A

    2014-07-01

    The topic of holiday weight gain has been a frequent subject of the lay media; however, scientific interest has only been recent. Multiple studies in Western societies have reported average weight gains among adults during the period between mid-November and mid-January that were about 0.5 kg. The range in individual weight changes was large, however, and the already overweight and obese gain more weight than those who are healthy weight. When the average gain across the year was also measured, the holiday weight was the major contributor to annual excess weight gain. Efforts patterned to increase awareness to energy balance and body weight have been shown to be successful at reducing such gain. An exception to holiday weight gain being a major contributor to annual excess gain has been children, in whom summer weight gains have been observed to be the major contributor to average excess weight gain. Copyright © 2014 Elsevier Inc. All rights reserved.

  2. Tropical Forest Gain and Interactions amongst Agents of Forest Change

    Directory of Open Access Journals (Sweden)

    Sean Sloan

    2016-02-01

    Full Text Available The tropical deforestation literature advocates multi-agent enquiry in recognition that key dynamics arise from inter-agent interactions. Studies of tropical forest-cover gain have lagged in this respect. This article explores the roles and key aspects of interactions shaping natural forest regeneration and active reforestation in Eastern Panama since 1990. It employs household surveys of agricultural landholders, interviews with community forest-restoration organisations, archival analysis of plantation reforestation interests, satellite image analysis of forest-cover change, and the consideration of State reforestation policies. Forest-cover gain reflected a convergence of interests and land-use trends amongst agents. Low social and economic costs of sustained interaction and organisation enabled extensive forest-cover gain, but low transaction costs did not. Corporate plantation reforestation rose to the fore of regional forest-cover gain via opportunistic land sales by ranchers and economic subsidies indicative of a State preference for autonomous, self-organising forest-cover gain. This reforestation follows a recent history of neoliberal frontier development in which State-backed loggers and ranchers similarly displaced agriculturalists. Community institutions, long neglected by the State, struggled to coordinate landholders and so effected far less forest-cover gain. National and international commitments to tropical forest restoration risk being similarly characterised as ineffective by a predominance of industrial plantation reforestation without greater State support for community forest management.

  3. Measure and integral an introduction to real analysis

    CERN Document Server

    Wheeden, Richard L

    2015-01-01

    Now considered a classic text on the topic, Measure and Integral: An Introduction to Real Analysis provides an introduction to real analysis by first developing the theory of measure and integration in the simple setting of Euclidean space, and then presenting a more general treatment based on abstract notions characterized by axioms and with less geometric content.Published nearly forty years after the first edition, this long-awaited Second Edition also:Studies the Fourier transform of functions in the spaces L1, L2, and Lp, 1 p Shows the Hilbert transform to be a bounded operator on L2, as an application of the L2 theory of the Fourier transform in the one-dimensional caseCovers fractional integration and some topics related to mean oscillation properties of functions, such as the classes of Hölder continuous functions and the space of functions of bounded mean oscillationDerives a subrepresentation formula, which in higher dimensions plays a role roughly similar to the one played by the fundamental theor...

  4. Variational measures and the Kurzweil-Henstock integral

    Czech Academy of Sciences Publication Activity Database

    Schwabik, Štefan

    2009-01-01

    Roč. 59, č. 6 (2009), s. 731-752 ISSN 0139-9918 R&D Projects: GA AV ČR IAA100190702 Institutional research plan: CEZ:AV0Z10190503 Keywords : variational measure * Kurzweil-Henstock integral Subject RIV: BA - General Mathematics Impact factor: 0.308, year: 2009

  5. Short/Medium-Term Macroeconomic Impact of Investment Associated with 'Grenelle de l'Environnement' Investments on Growth and Employment

    International Nuclear Information System (INIS)

    Guillerminet, Marie-Laure; Briard, Philippe; Fery, Pierre; Galko, Elodie; Klein, Caroline; Ollivier, Timothee

    2016-01-01

    The 'Grenelle de l'Environnement' is a French policy aimed at achieving the objectives defined in the EU climate and energy package. This study evaluates the short- to medium-term impact of the main economic measures of 'Grenelle' on employment and growth. The simulations run with the macro-econometric model Mesange show a positive impact of these measures on GDP and employment in the short run, mainly via the investment multiplier. The impact turns negative from 2020 on because investment slows and taxes increase to finance the latter. These results are robust to different assumptions on oil prices, household saving behaviour, public funding, and productivity gains associated with new transport projects. However, they do not factor in the impact of 'Grenelle' on the environment, competitiveness, and well-being

  6. Double-differential recording and AGC using microcontrolled variable gain ASIC.

    Science.gov (United States)

    Rieger, Robert; Deng, Shin-Liang

    2013-01-01

    Low-power wearable recording of biopotentials requires acquisition front-ends with high common-mode rejection for interference suppression and adjustable gain to provide an optimum signal range to a cascading analogue-to-digital stage. A microcontroller operated double-differential (DD) recording setup and automatic gain control circuit (AGC) are discussed which reject common-mode interference and provide tunable gain, thus compensating for imbalance and variation in electrode interface impedance. Custom-designed variable gain amplifiers (ASIC) are used as part of the recording setup. The circuit gain and balance is set by the timing of microcontroller generated clock signals. Measured results are presented which confirm that improved common-mode rejection is achieved compared to a single differential amplifier in the presence of input network imbalance. Practical measured examples further validate gain control suitable for biopotential recording and power-line rejection for wearable ECG and EMG recording. The prototype front-end consumes 318 μW including amplifiers and microcontroller.

  7. Special equipment for processing can-rupture measurements; Equipement specialise de traitement des mesures de rupture de gaines

    Energy Technology Data Exchange (ETDEWEB)

    Kaiser, J.; Phalippou, J.; Dumont, D.; Viellard, R. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1969-07-01

    Recent installations for detecting can-rupture in nuclear reactors use, in the measurement processing section, a digital computer, either completely or partially. The reliability of the system is limited by that of the computer, which represents a common point for the processing of data from the detector. In order to satisfy the demands imposed by safety considerations for the operation of the equipment it is necessary to consider the possibility of installing a second computer in certain cases. The use of a computer involves the presence as interface between the detection equipment and the computer itself, of sealers operating as integrators for the pulses produced by the detector. By adding a certain number of circuits to these sealers, it is possible to carry out the work now demanded of the computer, as far as the calculation is concerned. This reasoning has led us to a so-called 'decentralized' solution involving the construction of specialized equipment in the region of the prospector itself. We believe that this solution, apart from the reliability point of view, has definite economic advantages. In our solution, the common point in the processing of the data is now situated not in the zone of the production of results but further down, in the printing out of these results. Even in the case of an incident at the common point, the results are produced, exposed and compared to the alarm thresholds. In the case of a breakdown of the specialized equipment, the results from this prospector are no longer available but the others continue to operate. It seems that this solution is more reliable than that employing universal computers. By using an interchangeable drawer system (MULTIBLOC) it is possible to replace rapidly any of the specialized equipment which breaks down. The systematic use of integrated circuits (TTL) ensures an increased reliability of the equipment. (author) [French] Les installations recentes de detection de rupture de gaines

  8. Innovative Performance Measurement: an Integrative Perspective of Stakeholder's View

    Directory of Open Access Journals (Sweden)

    López-Fresno Palmira

    2014-11-01

    Full Text Available Business Process Management (BPM has been increasingly focused as an holistic approach to manage organizations for better organizational effectiveness. BPM involves the use of innovative performance measurement systems to follow up, coordinate, control and improve processes and overall business efficacy and efficiency. In this paper we propose a global holistic perspective of integrated information, combining the view of all stakeholders and both qualitative and quantitative information, as a basic prerequisite for quality of information for better decision making. The paper includes findings from an empirical case study of measuring Parkinson's Disease Neurosurgery process, including stakeholder's view with an integrative perspective.

  9. 26 CFR 1.1402(a)-6 - Gain or loss from disposition of property.

    Science.gov (United States)

    2010-04-01

    ... (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES Tax on Self-Employment Income § 1.1402(a)-6 Gain or loss from..., coal, or iron ore, even though held primarily for sale to customers, if section 631 is applicable to...

  10. Unequal Gain of Equal Resources across Racial Groups

    Directory of Open Access Journals (Sweden)

    Shervin Assari

    2018-01-01

    Full Text Available The health effects of economic resources (eg, education, employment, and living place and psychological assets (eg, self-efficacy, perceived control over life, anger control, and emotions are well-known. This article summarizes the results of a growing body of evidence documenting Blacks’ diminished return, defined as a systematically smaller health gain from economic resources and psychological assets for Blacks in comparison to Whites. Due to structural barriers that Blacks face in their daily lives, the very same resources and assets generate smaller health gain for Blacks compared to Whites. Even in the presence of equal access to resources and assets, such unequal health gain constantly generates a racial health gap between Blacks and Whites in the United States. In this paper, a number of public policies are recommended based on these findings. First and foremost, public policies should not merely focus on equalizing access to resources and assets, but also reduce the societal and structural barriers that hinder Blacks. Policy solutions should aim to reduce various manifestations of structural racism including but not limited to differential pay, residential segregation, lower quality of education, and crime in Black and urban communities. As income was not found to follow the same pattern demonstrated for other resources and assets (ie, income generated similar decline in risk of mortality for Whites and Blacks, policies that enforce equal income and increase minimum wage for marginalized populations are essential. Improving quality of education of youth and employability of young adults will enable Blacks to compete for high paying jobs. Policies that reduce racism and discrimination in the labor market are also needed. Without such policies, it will be very difficult, if not impossible, to eliminate the sustained racial health gap in the United States.

  11. Information Technology How Leading Firms Use It to Gain an Advantage

    CERN Document Server

    Rapp, William V

    2002-01-01

    Focuses on the strategic principles fundamental to using information technology to gain market control. This book provides case examples of how to use IT. It is designed to help managers struggling with how to harness the information revolution. It describes how non-information technology companies are employing strategic principles and using it.

  12. Mentoring: The Contextualisation of Learning--Mentor, Protege and Organisational Gain in Higher Education.

    Science.gov (United States)

    Dutton, Chris

    2003-01-01

    A British university's hospitality education program matched students with industry mentors. For students, mentoring helped contextualize learning and contributed to personal development. Mentors gained personal satisfaction, and employers were able to hire vocationally aware graduates. (Contains 43 references.) (SK)

  13. Variety Gains and the Extensive Margin of Trade

    OpenAIRE

    Mohler, Lukas

    2012-01-01

    Findings from the literature suggest that previous estimates of the variety gains from trade are too small because of the imprecise measurement of the imported variety set under the Armington assumption. In this contribution, I use results from the literature on multi-product firms to obtain variety gain estimates that account for the entry and exit of firms as well as for product turnover within firms and find that welfare gains increase by a factor of 2.5 compared to the baseline Armington ...

  14. Mars Atmospheric Entry Integrated Navigation with Partial Intermittent Measurements

    Directory of Open Access Journals (Sweden)

    Tai-shan Lou

    2017-01-01

    Full Text Available Signal degradation suffered by the vehicle is a combination brownout and blackout during Mars atmospheric entry. The communications brownout means that signal fades and blackout means that the signal is lost completely. The communications brownout and blackout periods are analyzed and predicted with an altitude and velocity profiles. In the brownout period, the range measurements between the vehicle and the orbiters are modeled as intermittent measurements with the radio signal arrival probabilities, which are distributed as a Rayleigh distribution of the electron number density around the entry vehicle. A new integrated navigation strategy during the Mars atmospheric entry phase is proposed to consider the probabilities of the radio measurements in the communications brownout and blackout periods under the IMU/beacon scenario based on the information filter with intermittent measurements. Numerical navigation simulations are designed to show the performance of the proposed navigation strategy under the integrated navigation scenario.

  15. Changes in wealth distribution in Italy (2002-2012 and who gained from the Great Recession

    Directory of Open Access Journals (Sweden)

    Ignazio Drudi

    2017-06-01

    Full Text Available The aim of the paper is to analyze changes in families’ assets between 2002 and 2012; to measure changes in the degree of inequality; and to identify which social groups (or classes have gained from these changes, using the decomposition procedure of the Gini concentration ratio proposed by Dagum (1997. The paper introduces two important methodological innovations. First, the definition of household wealth employed here is net wealth minus the value of the household’s home (if owned. Second, we develop a new method for computing the Gini coefficient in presence of negative values, and for decomposing it. JEL Classification: D10, D31

  16. Maternal Obesity, Gestational Weight Gain, and Asthma in Offspring.

    Science.gov (United States)

    Polinski, Kristen J; Liu, Jihong; Boghossian, Nansi S; McLain, Alexander C

    2017-11-09

    Obesity is common among women of childbearing age; intrauterine exposure to maternal obesity or gestational weight gain may influence the development of asthma in early childhood. We examined the relationships of maternal obesity and gestational weight gain with asthma in offspring. We used data from the Early Childhood Longitudinal Study-Birth Cohort, which has a nationally representative sample of children followed from birth in 2001 through age 4 (n = 6,450). Asthma was based on parental report of a medical professional's diagnosis. We used generalized estimating equation binomial models to compute adjusted odds ratios (ORs) of childhood asthma with maternal obesity and 4 measures of gestational weight gain. Compared with children of normal-weight mothers, children of obese mothers had increased risk of asthma (adjusted OR, 1.63; 95% confidence interval [CI], 1.26-2.12) by age 4, and children born to overweight mothers had similar risk (adjusted OR, 1.25; 95% CI, 0.99-1.59). Extreme-low weight gain (gain (≥25 kg) were associated with increased risk of asthma; however, the following measures were not significant predictors of asthma: meeting gestational weight gain recommendations of the Institute of Medicine, total gestational weight gain, and weekly rate of weight gain in the second and third trimesters. Extreme-low or extreme-high gestational weight gain and maternal obesity are risk factors for early childhood asthma, further evidence of the long-term impact of intrauterine exposure on children and the need to target preconception care to improve child health indicators.

  17. Peer-teaching in the food chemistry laboratory: student-produced experiments, peer and audio feedback, and integration of employability skills

    OpenAIRE

    Julie Lisa Dunne

    2014-01-01

    This paper describes the author’s experience over the last several years of implementing an alternative Food Chemistry laboratory practical model for a group of third-year BSc Nutraceuticals students. The initial main objectives were to prepare students for the more independent final-year research project; to incorporate innovative approaches to feedback; and to integrate key employability skills into the curriculum. These were achieved through building the skills required to ultimately allow...

  18. An employer brand predictive model for talent attraction and retention

    Directory of Open Access Journals (Sweden)

    Annelize Botha

    2011-11-01

    Full Text Available Orientation: In an ever shrinking global talent pool organisations use employer brand to attract and retain talent, however, in the absence of theoretical pointers, many organisations are losing out on a powerful business tool by not developing or maintaining their employer brand correctly. Research purpose: This study explores the current state of knowledge about employer brand and identifies the various employer brand building blocks which are conceptually integrated in a predictive model. Motivation for the study: The need for scientific progress though the accurate representation of a set of employer brand phenomena and propositions, which can be empirically tested, motivated this study. Research design, approach and method: This study was nonempirical in approach and searched for linkages between theoretical concepts by making use of relevant contextual data. Theoretical propositions which explain the identified linkages were developed for purpose of further empirical research. Main findings: Key findings suggested that employer brand is influenced by target group needs, a differentiated Employer Value Proposition (EVP, the people strategy, brand consistency, communication of the employer brand and measurement of Human Resources (HR employer branding efforts. Practical/managerial implications: The predictive model provides corporate leaders and their human resource functionaries a theoretical pointer relative to employer brand which could guide more effective talent attraction and retention decisions. Contribution/value add: This study adds to the small base of research available on employer brand and contributes to both scientific progress as well as an improved practical understanding of factors which influence employer brand.

  19. High-gain bipolar detector on float-zone silicon

    Science.gov (United States)

    Han, D. J.; Batignani, G.; Del Guerra, A.; Dalla Betta, G.-F.; Boscardin, M.; Bosisio, L.; Giorgi, M.; Forti, F.

    2003-10-01

    Since the float-zone (FZ) silicon has lower contaminations and longer minority-carrier lifetime than those in Czochralski silicon and other semiconductor materials, it has potential advantages to fabricate bipolar detectors on the high-purity FZ silicon substrate to achieve a high gain at ultra-low-signal levels. The authors present preliminary experimental results on a bipolar detector fabricated on an unusual high-purity FZ silicon substrate. A backside gettering layer of phosphorus-doped polysilicon was employed to preserve the long carrier lifetime of the high-purity FZ silicon. The device has been investigated in the detection of a continuous flux of X-ray and infrared light. The bipolar detector with a circular emitter of 2 mm diameter has demonstrated high gains up to 3820 for 22 keV X-ray from a 1 mCi Cd radioactive source (the X-ray photon flux, received by the detector is estimated to be ˜7.77×10 4/s). High gain up to 4400 for 0.17 nW light with a wavelength of 0.83 μm has been observed for the same device.

  20. High-gain bipolar detector on float-zone silicon

    International Nuclear Information System (INIS)

    Han, D.J.; Batignani, G.; Guerra, A.D.A. Del; Dalla Betta, G.-F.; Boscardin, M.; Bosisio, L.; Giorgi, M.; Forti, F.

    2003-01-01

    Since the float-zone (FZ) silicon has lower contaminations and longer minority-carrier lifetime than those in Czochralski silicon and other semiconductor materials, it has potential advantages to fabricate bipolar detectors on the high-purity FZ silicon substrate to achieve a high gain at ultra-low-signal levels. The authors present preliminary experimental results on a bipolar detector fabricated on an unusual high-purity FZ silicon substrate. A backside gettering layer of phosphorus-doped polysilicon was employed to preserve the long carrier lifetime of the high-purity FZ silicon. The device has been investigated in the detection of a continuous flux of X-ray and infrared light. The bipolar detector with a circular emitter of 2 mm diameter has demonstrated high gains up to 3820 for 22 keV X-ray from a 1 mCi Cd radioactive source (the X-ray photon flux, received by the detector is estimated to be ∼7.77x10 4 /s). High gain up to 4400 for 0.17 nW light with a wavelength of 0.83 μm has been observed for the same device

  1. ATTITUDES AND OPINIONS OF EMPLOYERS, EMPLOYEES AND PARENTS ABOUT THE EMPLOYMENT OF PEOPLE WITH AUTISM IN THE REPUBLIC OF MACEDONIA

    Directory of Open Access Journals (Sweden)

    Tanja STANKOVA

    2010-11-01

    Full Text Available The right to work is one of the fundamental human rights in all developed countries around the world. The employment, actually the right to work of persons with disability is the final phase of the long and complex process of their rehabilitation that affects the possibility of their integration in the community.The main objective of this research is to investigate the possibility of employment of people with autism, based on the attitudes and opinions of employers, employees and parents of the children with autism.The basic tasks of this research are: to determine whether the employers would employ a person with autism; weather employers and the employees know what autism is; weather according to employers and employees people with autism are able to perform their job duties in complete and weather the parents of children with autism would like their child to be employed.We conducted this research in a period of 3 months and included 130 respondents. Obtained data were collected, grouped, tabled and processed with standard statistical program Microsoft Office Excel 2003, applying χ2 tests and Fisher's Exact test. Statistical important difference was at the level of p<0.05.From the analysis and the interpretation of the results, we concluded that in the Republic of Macedonia do not exist positive atmosphere, for employment of the persons with autism, the employers do not want to employ a person with autism. The professionals must engage more deeply in this problematic in order to achieve a complete integration of the people with autism in the society.

  2. A Prospective Validation Study of a Rainbow Model of Integrated Care Measurement Tool in Singapore.

    Science.gov (United States)

    Nurjono, Milawaty; Valentijn, Pim P; Bautista, Mary Ann C; Wei, Lim Yee; Vrijhoef, Hubertus Johannes Maria

    2016-04-08

    The conceptual ambiguity of the integrated care concept precludes a full understanding of what constitutes a well-integrated health system, posing a significant challenge in measuring the level of integrated care. Most available measures have been developed from a disease-specific perspective and only measure certain aspects of integrated care. Based on the Rainbow Model of Integrated Care, which provides a detailed description of the complex concept of integrated care, a measurement tool has been developed to assess integrated care within a care system as a whole gathered from healthcare providers' and managerial perspectives. This paper describes the methodology of a study seeking to validate the Rainbow Model of Integrated Care measurement tool within and across the Singapore Regional Health System. The Singapore Regional Health System is a recent national strategy developed to provide a better-integrated health system to deliver seamless and person-focused care to patients through a network of providers within a specified geographical region. The validation process includes the assessment of the content of the measure and its psychometric properties. If the measure is deemed to be valid, the study will provide the first opportunity to measure integrated care within Singapore Regional Health System with the results allowing insights in making recommendations for improving the Regional Health System and supporting international comparison.

  3. Design of a low noise distributed amplifier with adjustable gain control in 0.15 μm GaAs PHEMT

    International Nuclear Information System (INIS)

    Zhang Ying; Wang Zhigong; Xu Jian; Luo Yin

    2012-01-01

    A low noise distributed amplifier consisting of 9 gain cells is presented. The chip is fabricated with 0.15-μm GaAs pseudomorphic high electron mobility transistor (PHEMT) technology from Win Semiconductor of Taiwan. A special optional gate bias technique is introduced to allow an adjustable gain control range of 10 dB. A novel cascode structure is adopted to extend the output voltage and bandwidth. The measurement results show that the amplifier gives an average gain of 15 dB with a gain flatness of ±1 dB in the 2–20 GHz band. The noise figure is between 2 and 4.1 dB during the band from 2 to 20 GHz. The amplifier also provides 13.8 dBm of output power at a 1 dB gain compression point and 10.5 dBm of input third order intercept point (IIP3), which demonstrates the excellent performance of linearity. The power consumption is 300 mW with a supply of 5 V, and the chip area is 2.36 × 1.01 mm 2 . (semiconductor integrated circuits)

  4. Energy performance of windows based on the net energy gain

    DEFF Research Database (Denmark)

    Svendsen, Svend; Kragh, Jesper; Laustsen, Jacob Birck

    2005-01-01

    The paper presents a new method to set up energy performance requirements and energy classes for windows of all dimensions and configurations. The net energy gain of windows is the solar gain minus the heat loss integrated over the heating season. The net energy gain can be calculated for one...... be expressed as a function of two parameters representing the energy performance and two parameters representing the geometry of the window. The two energy performance parameters are the net energy gain per area of the glazing unit and the sum of the heat losses through the frame and the assembly per length...... of the frame. The two geometry numbers are the area of the glazing unit relative to the window area and the length of the frame profiles relative to the window area. Requirements and classes for the energy performance of the window can be given by assigning values to the two energy performance parameters...

  5. An integrated circuit switch

    Science.gov (United States)

    Bonin, E. L.

    1969-01-01

    Multi-chip integrated circuit switch consists of a GaAs photon-emitting diode in close proximity with S1 phototransistor. A high current gain is obtained when the transistor has a high forward common-emitter current gain.

  6. 78 FR 60303 - Agency Information Collection Activities: Online Survey of Web Services Employers; New...

    Science.gov (United States)

    2013-10-01

    ...-NEW] Agency Information Collection Activities: Online Survey of Web Services Employers; New... information collection. (2) Title of the Form/Collection: Online Survey of Web Services Employers. (3) Agency... USCIS obtains data on the E-Verify Program Web Services. Gaining an understanding of the Web Services...

  7. TCAD simulation of Low Gain Avalanche Detectors

    Science.gov (United States)

    Dalal, Ranjeet; Jain, Geetika; Bhardwaj, Ashutosh; Ranjan, Kirti

    2016-11-01

    In the present work, detailed simulation using Technology Computer Aided Design (TCAD) tool, Silvaco for non-irradiated and irradiated LGAD (Low Gain Avalanche Detector) devices has been carried out. The effects of different design parameters and proton irradiation on LGAD operation are discussed in detail. An already published effective two trap bulk damage model is used to simulate the radiation damage without implementing any acceptor removal term. The TCAD simulation for irradiated LGAD devices produce decreasing gain with increasing fluence, similar to the measurement results. The space charge density and electric field distribution are used to illustrate the possible reasons for the degradation of gain of the irradiated LGAD devices.

  8. TCAD simulation of Low Gain Avalanche Detectors

    Energy Technology Data Exchange (ETDEWEB)

    Dalal, Ranjeet; Jain, Geetika; Bhardwaj, Ashutosh, E-mail: ashutosh.bhardwaj@cern.ch; Ranjan, Kirti

    2016-11-11

    In the present work, detailed simulation using Technology Computer Aided Design (TCAD) tool, Silvaco for non-irradiated and irradiated LGAD (Low Gain Avalanche Detector) devices has been carried out. The effects of different design parameters and proton irradiation on LGAD operation are discussed in detail. An already published effective two trap bulk damage model is used to simulate the radiation damage without implementing any acceptor removal term. The TCAD simulation for irradiated LGAD devices produce decreasing gain with increasing fluence, similar to the measurement results. The space charge density and electric field distribution are used to illustrate the possible reasons for the degradation of gain of the irradiated LGAD devices.

  9. TCAD simulation of Low Gain Avalanche Detectors

    International Nuclear Information System (INIS)

    Dalal, Ranjeet; Jain, Geetika; Bhardwaj, Ashutosh; Ranjan, Kirti

    2016-01-01

    In the present work, detailed simulation using Technology Computer Aided Design (TCAD) tool, Silvaco for non-irradiated and irradiated LGAD (Low Gain Avalanche Detector) devices has been carried out. The effects of different design parameters and proton irradiation on LGAD operation are discussed in detail. An already published effective two trap bulk damage model is used to simulate the radiation damage without implementing any acceptor removal term. The TCAD simulation for irradiated LGAD devices produce decreasing gain with increasing fluence, similar to the measurement results. The space charge density and electric field distribution are used to illustrate the possible reasons for the degradation of gain of the irradiated LGAD devices.

  10. The influence of the gait-related arm swing on elevation gain measured by sport watches

    Directory of Open Access Journals (Sweden)

    Ammann Rahel

    2016-06-01

    Full Text Available The elevation gain is an important contributor to the total workload in endurance sports. The purpose of this study was to evaluate the influence of the arm swing on elevation gain in three sport watches (Garmin® Forerunner 910XT, Polar® RS800CX and Suunto® Ambit2 on a flat 400 m outdoor track. Altogether, a total of 120 repetitions of 1,200 m were performed at self-selected speeds corresponding to strolling, walking, jogging and running. During the assessment two devices of each sport watch, one secured on the hip and one on the wrist, were worn by the participants. A small but significant (effect size = .39; p < .001 influence of the arm swing on elevation was revealed in all sport watches. Elevation indication errors recorded on the wrist were significantly larger than the ones recorded on the hip (4.0-7.4 vs. 1.2-5.7 m per 1,200 m; p < .05. Furthermore, when wearing the devices on the wrist, errors in elevation indication increased when gait speed increased. Users should be aware that wearing the devices on the hip can significantly decrease measurement errors. This might be especially relevant for activities with high dynamics, such as jogging and running.

  11. Integrated Control Using the SOFFT Control Structure

    Science.gov (United States)

    Halyo, Nesim

    1996-01-01

    The need for integrated/constrained control systems has become clearer as advanced aircraft introduced new coupled subsystems such as new propulsion subsystems with thrust vectoring and new aerodynamic designs. In this study, we develop an integrated control design methodology which accomodates constraints among subsystem variables while using the Stochastic Optimal Feedforward/Feedback Control Technique (SOFFT) thus maintaining all the advantages of the SOFFT approach. The Integrated SOFFT Control methodology uses a centralized feedforward control and a constrained feedback control law. The control thus takes advantage of the known coupling among the subsystems while maintaining the identity of subsystems for validation purposes and the simplicity of the feedback law to understand the system response in complicated nonlinear scenarios. The Variable-Gain Output Feedback Control methodology (including constant gain output feedback) is extended to accommodate equality constraints. A gain computation algorithm is developed. The designer can set the cross-gains between two variables or subsystems to zero or another value and optimize the remaining gains subject to the constraint. An integrated control law is designed for a modified F-15 SMTD aircraft model with coupled airframe and propulsion subsystems using the Integrated SOFFT Control methodology to produce a set of desired flying qualities.

  12. Changes in Employed People’s Health Satisfaction

    Directory of Open Access Journals (Sweden)

    Monika Jungbauer-Gans

    2013-09-01

    Full Text Available The article examines for Germany whether the subjective satisfaction with health has changed over the course of time. It is analysed whether a drop in health satisfaction can be observed and whether this can be explained by changing employment circumstances. Labour market research has documented a change in the employment situation in detail, which can be subsumed under the keyword of precarisation. In the theoretical section we will portray the current state of research concerning the development of the employment situation and emphasize the significance of gainful employment for health. The empirical analyses of the article are based on data of employed people in the German Socio-Economic Panel Study (SOEP of the years 1985, 1996 and 2009. The data show a significantly declining health satisfaction between 1985 and 2009 in Western Germany and no noteworthy change in Eastern Germany between 1996 and 2009. The Blinder/Oaxaca decomposition is used in the analyses to better differentiate the effect of the changed employment situation on the drop in health satisfaction. The analyses indeed reveal changing effects of the employment situation. In Western Germany, a significant percentage of the lesser health satisfaction can be attributed to an increasing number of workers in precarious employment situations. Workplace security is of primary significance for explaining the declining health satisfaction in Western Germany.

  13. Gauging the Association of Employability Skills and Being Employable among Students

    OpenAIRE

    Fayeq Ali Ali

    2017-01-01

    The current study is to measure the employability skills of students and to assess how employability skills are perceived in higher educations. Three sets of employability skills have been used such as Basic Academic Skills, Personal Qualities and High-Order Thinking. A questionnaire has been developed and distributed among students in universities, Erbil, Kurdistan. Respondents’ opinions were assessed using a Likert scale analysis that shows opinions between two extremes of levels of agreeme...

  14. Applied optics. Gain modulation by graphene plasmons in aperiodic lattice lasers.

    Science.gov (United States)

    Chakraborty, S; Marshall, O P; Folland, T G; Kim, Y-J; Grigorenko, A N; Novoselov, K S

    2016-01-15

    Two-dimensional graphene plasmon-based technologies will enable the development of fast, compact, and inexpensive active photonic elements because, unlike plasmons in other materials, graphene plasmons can be tuned via the doping level. Such tuning is harnessed within terahertz quantum cascade lasers to reversibly alter their emission. This is achieved in two key steps: first, by exciting graphene plasmons within an aperiodic lattice laser and, second, by engineering photon lifetimes, linking graphene's Fermi energy with the round-trip gain. Modal gain and hence laser spectra are highly sensitive to the doping of an integrated, electrically controllable, graphene layer. Demonstration of the integrated graphene plasmon laser principle lays the foundation for a new generation of active, programmable plasmonic metamaterials with major implications across photonics, material sciences, and nanotechnology. Copyright © 2016, American Association for the Advancement of Science.

  15. Choquet Integral of Fuzzy-Number-Valued Functions: The Differentiability of the Primitive with respect to Fuzzy Measures and Choquet Integral Equations

    Directory of Open Access Journals (Sweden)

    Zengtai Gong

    2014-01-01

    Full Text Available This paper deals with the Choquet integral of fuzzy-number-valued functions based on the nonnegative real line. We firstly give the definitions and the characterizations of the Choquet integrals of interval-valued functions and fuzzy-number-valued functions based on the nonadditive measure. Furthermore, the operational schemes of above several classes of integrals on a discrete set are investigated which enable us to calculate Choquet integrals in some applications. Secondly, we give a representation of the Choquet integral of a nonnegative, continuous, and increasing fuzzy-number-valued function with respect to a fuzzy measure. In addition, in order to solve Choquet integral equations of fuzzy-number-valued functions, a concept of the Laplace transformation for the fuzzy-number-valued functions in the sense of Choquet integral is introduced. For distorted Lebesgue measures, it is shown that Choquet integral equations of fuzzy-number-valued functions can be solved by the Laplace transformation. Finally, an example is given to illustrate the main results at the end of the paper.

  16. A 2 x 2 imaging MIMO system based on LED Visible Light Communications employing space balanced coding and integrated PIN array reception

    DEFF Research Database (Denmark)

    Li, Jiehui; Xu, Yinfan; Shi, Jianyang

    2016-01-01

    In this paper, we proposed a 2 x 2 imaging Multi-Input Multi-Output (MIMO)-Visible Light Communication (VLC) system by employing Space Balanced Coding (SBC) based on two RGB LEDs and integrated PIN array reception. We experimentally demonstrated 1.4-Gbit/s VLC transmission at a distance of 2.5 m...

  17. Perceptual Measurement in Schizophrenia: Promising Electrophysiology and Neuroimaging Paradigms From CNTRICS

    Science.gov (United States)

    Butler, Pamela D.; Chen, Yue; Ford, Judith M.; Geyer, Mark A.; Silverstein, Steven M.; Green, Michael F.

    2012-01-01

    The sixth meeting of the Cognitive Neuroscience Treatment Research to Improve Cognition in Schizophrenia (CNTRICS) focused on selecting promising imaging paradigms for each of the cognitive constructs selected in the first CNTRICS meeting. In the domain of perception, the 2 constructs of interest were “gain control” and “visual integration.” CNTRICS received 6 task nominations for imaging paradigms for gain control and 3 task nominations for integration. The breakout group for perception evaluated the degree to which each of these tasks met prespecified criteria. For gain control, the breakout group believed that one task (mismatch negativity) was already mature and was being incorporated into multisite clinical trials. The breakout group recommended that 1 visual task (steady-state visual evoked potentials to magnocellular- vs parvocellular-biased stimuli) and 2 auditory measures (an event-related potential (ERP) measure of corollary discharge and a functional magnetic resonance imaging (fMRI) version of prepulse inhibition of startle) be adapted for use in clinical trials in schizophrenia research. For visual integration, the breakout group recommended that fMRI and ERP versions of a contour integration test and an fMRI version of a coherent motion test be adapted for use in clinical trials. This manuscript describes the ways in which each of these tasks met the criteria used in the breakout group to evaluate and recommend tasks for further development. PMID:21890745

  18. The Contribution of Work-Integrated Learning to Undergraduate Employability Skill Outcomes

    Science.gov (United States)

    Jackson, Denise

    2013-01-01

    WIL has attracted considerable attention as an instrument for enhancing professional practice and developing work-readiness in new graduates. It is widely considered as a point of difference in developing graduate employability by enhancing skill outcomes, such as team-work, communication, self-management and problem solving, employment prospects…

  19. Landau damping: the mechanics model and its ultimate entropy gain

    International Nuclear Information System (INIS)

    Hannay, J H; Kluge, Michel

    2011-01-01

    Classical mechanics has only been invoked to account for Landau damping in a rather half-hearted way, alongside plasma perturbation theory. In particular this invocation is essential for the study of the saturation, or post-linear (or 'nonlinear') regime of the damping initiated by Dawson and O'Neill. By embracing mechanics wholeheartedly here, with its attendant phase space, one can access results, old and new, cleanly and directly, and with one fewer numerical integration for the post-linear regime. By using a summation technique familiar in semiclassical quantum mechanics (Poisson summation), the one remaining numerical integration can be much improved in accuracy. Also accessible from mechanics is the ultimate entropy gain. Though zero for any finite time (in the absence of coarse graining), the entropy gain is ultimately non-zero (at infinite time the required coarse graining is zero). It is calculated analytically by using the appropriate asymptotics, hitherto not fully exploited.

  20. Irradiance Impact on Pollution by Integrating Nephelometer Measurements

    Directory of Open Access Journals (Sweden)

    Maria Rita Perrone

    2015-12-01

    Full Text Available Three-wavelength integrating nephelometer measurements combined with short- (SW and long-wave (LW irradiance measurements were used to investigate the irradiance effects on the daily evolution of the particulate matter (PM at the ground level, and contribute to the characterization of the land–atmosphere interaction in pollution dispersal. The integrating nephelometer measurements have allowed characterizing the daily changes of the PM optical and microphysical properties by the aerosol scattering coefficient (σp and the scattering Ångström coefficient (å. We found that on a daily basis σp reached the minimum values when the irradiance reached the maximum values, since the convective motions, which favor the particle dispersion at the surface, increase with the irradiance. The å value, which is commonly used as qualitative indicator of the dominant particle size, has allowed evaluating the irradiance effects on the mean particle size distribution at the surface and revealed that the irradiance increase favors mainly the dispersion of the ground-level fine particles. Particle size-distribution measurements supported the last comment. Measurements were performed from 4 to 10 May 2015 when the study site was affected by a Saharan dust outbreak, to also evaluate the impact of long-range transported particles on the daily evolution of the ground-level particle’s properties and the SW and LW irradiance.

  1. Employment impacts of alcohol taxes.

    Science.gov (United States)

    Wada, Roy; Chaloupka, Frank J; Powell, Lisa M; Jernigan, David H

    2017-12-01

    There is strong scientific evidence supporting the effectiveness of increasing alcohol taxes for reducing excessive alcohol consumption and related problems. Opponents have argued that alcohol tax increases lead to job losses. However, there has been no comprehensive economic analysis of the impact of alcohol taxes on employment. To fill this gap, a regional macroeconomic simulation model was used to assess the net impact of two hypothetical alcohol tax increases (a 5-cent per drink excise tax increase and a 5% sales tax increase on beer, wine, and distilled spirits, respectively) on employment in Arkansas, Florida, Massachusetts, New Mexico, and Wisconsin. The model accounted for changes in alcohol demand, average state income, and substitution effects. The employment impact of spending the new tax revenue on general expenditures versus health care was also assessed. Simulation results showed that a 5-cent per drink additional excise tax on alcoholic beverages with new tax revenues allocated to general expenditures increased net employment in Arkansas (802 jobs); Florida (4583 jobs); Massachusetts (978 jobs); New Mexico (653 jobs); and Wisconsin (1167 jobs). A 5% additional sales tax also increased employment in Arkansas (789 jobs; Florida (4493 jobs); Massachusetts (898 jobs); New Mexico (621 jobs); and Wisconsin (991 jobs). Using new alcohol tax revenues to fund health care services resulted in slightly lower net increases in state employment. The overall economic impact of alcohol tax increases cannot be fully assessed without accounting for the job gains resulting from additional tax revenues. Copyright © 2017 Elsevier Inc. All rights reserved.

  2. Measuring IC following a semi-qualitative approach: An integrated framework

    Directory of Open Access Journals (Sweden)

    Chiara Verbano

    2013-09-01

    Full Text Available Purpose: Considering the different IC measures adopted in literature, the advantages of adopting semi-qualitative measures, and the lack of an agreed system for IC evaluation, the purpose of the paper is to analyse literature on IC measurement following a semi-qualitative approach, with the final intent to build an IC measurement framework. Design/methodology/approach: A literature review on IC measurement system, following a semi-qualitative approach, has been conducted and analysed, in order to re-organize and synthesize all items used in previous researches. Findings: An integrated framework emerged from this research and it constitutes an IC  measurement system, created gathering and integrating different items previously adopted in literature. Each of these variables has been organized in categories belonging to one of the three main components of IC: human capital, internal structural capital and relational capital. Originality/value: This research provides an integrated tool for IC evaluation, fostering toward a well agreed measurement system that is still lacking in literature. This framework could be interesting  not only for the academic world, which in the last two decades reveals increasing attention to IC, but also for the management of the companies, that with IC measurement can increase awareness of the firm’s value and develop internal auditing system to support the management of these assets. Moreover, it could be a useful instrument for the communication of IC value to the external stakeholders, as customers, suppliers and especially shareholders, and to investors and financial analysts.

  3. Gain calibration of n-XYTER 1.0 - a prototype readout ASIC for the silicon tracking system of the CBM experiment

    Energy Technology Data Exchange (ETDEWEB)

    Sorokin, Iurii [Goethe Univ. Frankfurt am Main (Germany); Kiev Institute for Nuclear Research (Ukraine); Collaboration: CBM-Collaboration

    2013-07-01

    n-XYTER is a 128-channel readout ASIC which measures both the integral signal charge and the time of occurance. Due to its self-triggering design, high gain, high rate capability and bipolar front-end, the chip has found a use as a prototype readout for the Silicon Tracking System, Muon and Cherenkov detectors of the CBM experiment. It is also going to be applied in other projects in Darmstadt, Heidelberg and Dubna. To perform gain calibration of n-XYTER, reference charge pulses of a very small (down to 3000 e{sup -}), yet precisely known amplitude had to be generated. This was achieved by attenuating a voltage step to a sub-millivolt level and passing it through a tiny (1 pF) capacitor. Special care had to be taken to check for possible systematic errors in the measurements of the attenuation factor and of the coupling capacitance. In addition, the system had to be well shielded against RF pickup, the parasitic capacitances had to be minimized and ensured to stay invariable. Correct estimate of the systematic error was confirmed by performing a measurement with a different signal source - a planar silicon detector, exposed to γ-radiation of {sup 241}Am. Finally, the dominating error came from the channel-to-channel gain variation.

  4. Electronic meter with custom integrated circuit for electric energy measurement; Medidor eletronico de energia eletrica com circuito integrado dedicado

    Energy Technology Data Exchange (ETDEWEB)

    Caldas, Roberto Pereira

    1990-04-01

    The design and implementation of an electrical energy electronic meter for operation at low voltages, according to two steps of development carried out in Centro de Pesquisas de Energia Eletrica - CEPEL is described. In the first step, an electronic meter with discrete commercial components has been developed, in order to demonstrate to the Brazilian power suppliers the feasibility of such a device for electrical energy metering and charging. The second step was constituted by the design of an integrated circuit, aiming the reduction of the cost of the meter as well as the enhancement of its reliability. Several techniques of electrical energy measurement are presented. The meter with discrete components makes use of a time division multiplier (TDM), in order to determine the active power in the load. Voltage and current levels have been reduced through the use of voltage and current sensors compatible with the TDM's inputs. A V-F converter employing continuos integration, has been used for the determination of the energy consumed by the load through the integration of the TDM's output signal. Most of the discrete components of the meter have been replaced by the dedicated integrated circuit. The TDM has remained essentially the same, but the V-F converter has been changed into a dual-slope one, which is more adequate for implementation in a single chip. The tests performed with the prototypes of the meter including both the meter with discrete components and the meter with the custom-made integrated circuit have presented measurement errors of less the 0,2 %. The initial goal, according to Brazilian specifications of electromechanical meters and international specifications for electronic meters, was 1 %. (author)

  5. Electronic meter with custom integrated circuit for electric energy measurement; Medidor eletronico de energia eletrica com circuito integrado dedicado

    Energy Technology Data Exchange (ETDEWEB)

    Caldas, Roberto Pereira

    1990-04-01

    The design and implementation of an electrical energy electronic meter for operation at low voltages, according to two steps of development carried out in Centro de Pesquisas de Energia Eletrica - CEPEL is described. In the first step, an electronic meter with discrete commercial components has been developed, in order to demonstrate to the Brazilian power suppliers the feasibility of such a device for electrical energy metering and charging. The second step was constituted by the design of an integrated circuit, aiming the reduction of the cost of the meter as well as the enhancement of its reliability. Several techniques of electrical energy measurement are presented. The meter with discrete components makes use of a time division multiplier (TDM), in order to determine the active power in the load. Voltage and current levels have been reduced through the use of voltage and current sensors compatible with the TDM's inputs. A V-F converter employing continuos integration, has been used for the determination of the energy consumed by the load through the integration of the TDM's output signal. Most of the discrete components of the meter have been replaced by the dedicated integrated circuit. The TDM has remained essentially the same, but the V-F converter has been changed into a dual-slope one, which is more adequate for implementation in a single chip. The tests performed with the prototypes of the meter including both the meter with discrete components and the meter with the custom-made integrated circuit have presented measurement errors of less the 0,2 %. The initial goal, according to Brazilian specifications of electromechanical meters and international specifications for electronic meters, was 1 %. (author)

  6. Tuning gain and bandwidth of traveling wave tubes using metamaterial beam-wave interaction structures

    International Nuclear Information System (INIS)

    Lipton, Robert; Polizzi, Anthony

    2014-01-01

    We employ metamaterial beam-wave interaction structures for tuning the gain and bandwidth of short traveling wave tubes. The interaction structures are made from metal rings of uniform cross section, which are periodically deployed along the length of the traveling wave tube. The aspect ratio of the ring cross sections is adjusted to control both gain and bandwidth. The frequency of operation is controlled by the filling fraction of the ring cross section with respect to the size of the period cell.

  7. Polarization dependence of the optical modal gain in ZnO

    International Nuclear Information System (INIS)

    Kim, Bumjin; Kyhm, Kwangseuk; Cho, Chaeryong

    2010-01-01

    The modal gain spectrum due to the electron-hole plasma in ZnO was measured using a variable stripe length method. A modal gain contour map for energy and stripe length allowed the modal gain saturation to be analyzed in terms of the spectral and the stripe length dependences. The modal gain was observed to be more significant in the TE mode than in the TM mode due to the polarization asymmetry of the wurtzite structure. We also found that the degree of polarization are enhanced as the stripe length increased, despite of modal gain saturation.

  8. Time Difference Amplifier with Robust Gain Using Closed-Loop Control

    Science.gov (United States)

    Nakura, Toru; Mandai, Shingo; Ikeda, Makoto; Asada, Kunihiro

    This paper presents a Time Difference Amplifier (TDA) that amplifies the input time difference into the output time difference. Cross coupled chains of variable delay cells with the same number of stages are applicable for TDA, and the gain is adjusted via the closed-loop control. The TDA was fabricated using 65nm CMOS and the measurement results show that the time difference gain is 4.78 at a nominal power supply while the designed gain is 4.0. The gain is stable enough to be less than 1.4% gain shift under ±10% power supply voltage fluctuation.

  9. High-Current Cold Cathode Employing Diamond and Related Materials

    Energy Technology Data Exchange (ETDEWEB)

    Hirshfield, Jay L. [Omega-P, Inc., New Haven, CT (United States)

    2014-10-22

    The essence of this project was for diamond films to be deposited on cold cathodes to improve their emission properties. Films with varying morphology, composition, and size of the crystals were deposited and the emission properties of the cathodes that utilize such films were studied. The prototype cathodes fabricated by the methods developed during Phase I were tested and evaluated in an actual high-power RF device during Phase II. These high-power tests used the novel active RF pulse compression system and the X-band magnicon test facility at US Naval Research Laboratory. In earlier tests, plasma switches were employed, while tests under this project utilized electron-beam switching. The intense electron beams required in the switches were supplied from cold cathodes embodying diamond films with varying morphology, including uncoated molybdenum cathodes in the preliminary tests. Tests with uncoated molybdenum cathodes produced compressed X-band RF pulses with a peak power of 91 MW, and a maximum power gain of 16.5:1. Tests were also carried out with switches employing diamond coated cathodes. The pulse compressor was based on use of switches employing electron beam triggering to effect mode conversion. In experimental tests, the compressor produced 165 MW in a ~ 20 ns pulse at ~18× power gain and ~ 140 MW at ~ 16× power gain in a 16 ns pulse with a ~ 7 ns flat-top. In these tests, molybdenum blade cathodes with thin diamond coatings demonstrated good reproducible emission uniformity with a 100 kV, 100 ns high voltage pulse. The new compressor does not have the limitations of earlier types of active pulse compressors and can operate at significantly higher electric fields without breakdown.

  10. Broadband tunability of gain-flattened quantum-well semiconductor lasers with an external grating

    International Nuclear Information System (INIS)

    Mittelstein, M.; Mehuys, D.; Yariv, A.; Sarfaty, R.; Ungar, J.E.

    1989-01-01

    Semiconductor injection lasers are known to be tunable over a range of order kΒ · T. Quantum-well lasers, in particular, are shown to exhibit flattened, broadband gain spectra at a particular pumping condition. The gain requirement for a grating-tuned external cavity configuration is examined and is applied to a semiconductor quantum-well laser with an optimized length of gain region. The coupled-cavity formalism is employed to examine the conditions for continuous tuning. The possible tuning range of double-heterostructure lasers is compared to that of quantum-well lasers. The predicted broadband tunability of quantum-well lasers is confirmed experimentally by grating-tuning of uncoated lasers exceeding 120 nm, with single, longitudinal mode output power exceeding 300 mW

  11. Vocational education and employment over the life course using a new measure of occupational specificity.

    Science.gov (United States)

    Forster, Andrea G; Bol, Thijs

    2018-02-01

    Vocational education is seen as beneficial for the labor market allocation of young people. However, recent studies point to disadvantages later in the life course, where the specific skills that are obtained from vocational education decrease employability. This paper re-evaluates this hypothesis for the Netherlands with an improved measure for the vocational specificity of educational programs, utilizing both vertical (level) and horizontal (field) information on education. More specifically, we use a gradual measure for the linkage strength between education and occupation to predict employment over the life course. Using data from the national Dutch labor force surveys, we show that there is considerable heterogeneity in occupational specificity within the categories of vocational and general educational programs that is masked when using a dichotomous classification of general versus vocational education. In the life course analyses we find that the large early benefits of having vocational education disappear later in the career and turn into a small disadvantage before retirement. Copyright © 2017. Published by Elsevier Inc.

  12. Integration of sparse electrophysiological measurements with preoperative MRI using 3D surface estimation in deep brain stimulation surgery

    Science.gov (United States)

    Husch, Andreas; Gemmar, Peter; Thunberg, Johan; Hertel, Frank

    2017-03-01

    Intraoperative microelectrode recordings (MER) have been used for several decades to guide neurosurgeons during the implantation of Deep Brain Stimulation (DBS) electrodes, especially when targeting the subthalamic nucleus (STN) to suppress the symptoms of Parkinson's Disease. The standard approach is to use an array of up to five MER electrodes in a fixed configuration. Interpretation of the recorded signals yields a spatially very sparse set of information about the morphology of the respective brain structures in the targeted area. However, no aid is currently available for surgeons to intraoperatively integrate this information with other data available on the patient's individual morphology (e.g. MR imaging data used for surgical planning). This integration might allow surgeons to better determine the most probable position of the electrodes within the target structure during surgery. This paper suggests a method for reconstructing a surface patch from the sparse MER dataset utilizing additional a priori knowledge about the geometrical configuration of the measurement electrodes. The conventional representation of MER measurements as intervals of target region/non-target region is therefore transformed into an equivalent boundary set representation, allowing ecient point-based calculations. Subsequently, the problem is to integrate the resulting patch with a preoperative model of the target structure, which can be formulated as registration problem minimizing a distance measure between the two surfaces. When restricting this registration procedure to translations, which is reasonable given certain geometric considerations, the problem can be solved globally by employing an exhaustive search with arbitrary precision in polynomial time. The proposed method is demonstrated using bilateral STN/Substantia Nigra segmentation data from preoperative MRIs of 17 Patients with simulated MER electrode placement. When using simulated data of heavily perturbed electrodes

  13. Amplified spontaneous emissions in a high-gain laser amplifier

    International Nuclear Information System (INIS)

    Osada, Hidenori; Gamo, Hideya.

    1978-01-01

    The gain and line-narrowing of the amplified spontaneous emissions(ASE) in a partially homogeneous high-gain Xe 3.51 μm laser amplifier were studied theoretically and experimentally with emphasis of saturation effect. The unidirectionally travelling ASE was generated by conveniently using optical isolators and used as a broadband radiation source. It has properties of 10 μW/mm 2 in intensity with fluctuation of less than 1% in 5 hours, 43.5 MHz of the linewidth and 1.0 x 10 -3 radians of beam divergence. The measured saturation intensity was 4.85 μW/mm 2 and a small signal gain was 0.1 cm -1 . The theoretical prediction of the line-narrowing shows reasonablly good agreement with the measured one. (author)

  14. Gestational weight gain.

    Science.gov (United States)

    Kominiarek, Michelle A; Peaceman, Alan M

    2017-12-01

    Prenatal care providers are advised to evaluate maternal weight at each regularly scheduled prenatal visit, monitor progress toward meeting weight gain goals, and provide individualized counseling if significant deviations from a woman's goals occur. Today, nearly 50% of women exceed their weight gain goals with overweight and obese women having the highest prevalence of excessive weight gain. Risks of inadequate weight gain include low birthweight and failure to initiate breast-feeding whereas the risks of excessive weight gain include cesarean deliveries and postpartum weight retention for the mother and large-for-gestational-age infants, macrosomia, and childhood overweight or obesity for the offspring. Prenatal care providers have many resources and tools to incorporate weight and other health behavior counseling into routine prenatal practices. Because many women are motivated to improve health behaviors, pregnancy is often considered the optimal time to intervene for issues related to eating habits and physical activity to prevent excessive weight gain. Gestational weight gain is a potentially modifiable risk factor for a number of adverse maternal and neonatal outcomes and meta-analyses of randomized controlled trials report that diet or exercise interventions during pregnancy can help reduce excessive weight gain. However, health behavior interventions for gestational weight gain have not significantly improved other maternal and neonatal outcomes and have limited effectiveness in overweight and obese women. Copyright © 2017 Elsevier Inc. All rights reserved.

  15. The integrated disease network.

    Science.gov (United States)

    Sun, Kai; Buchan, Natalie; Larminie, Chris; Pržulj, Nataša

    2014-11-01

    The growing body of transcriptomic, proteomic, metabolomic and genomic data generated from disease states provides a great opportunity to improve our current understanding of the molecular mechanisms driving diseases and shared between diseases. The use of both clinical and molecular phenotypes will lead to better disease understanding and classification. In this study, we set out to gain novel insights into diseases and their relationships by utilising knowledge gained from system-level molecular data. We integrated different types of biological data including genome-wide association studies data, disease-chemical associations, biological pathways and Gene Ontology annotations into an Integrated Disease Network (IDN), a heterogeneous network where nodes are bio-entities and edges between nodes represent their associations. We also introduced a novel disease similarity measure to infer disease-disease associations from the IDN. Our predicted associations were systemically evaluated against the Medical Subject Heading classification and a statistical measure of disease co-occurrence in PubMed. The strong correlation between our predictions and co-occurrence associations indicated the ability of our approach to recover known disease associations. Furthermore, we presented a case study of Crohn's disease. We demonstrated that our approach not only identified well-established connections between Crohn's disease and other diseases, but also revealed new, interesting connections consistent with emerging literature. Our approach also enabled ready access to the knowledge supporting these new connections, making this a powerful approach for exploring connections between diseases.

  16. Integrated water resources management using engineering measures

    Science.gov (United States)

    Huang, Y.

    2015-04-01

    The management process of Integrated Water Resources Management (IWRM) consists of aspects of policies/strategies, measures (engineering measures and non-engineering measures) and organizational management structures, etc., among which engineering measures such as reservoirs, dikes, canals, etc., play the backbone that enables IWRM through redistribution and reallocation of water in time and space. Engineering measures are usually adopted for different objectives of water utilization and water disaster prevention, such as flood control and drought relief. The paper discusses the planning and implementation of engineering measures in IWRM of the Changjiang River, China. Planning and implementation practices of engineering measures for flood control and water utilization, etc., are presented. Operation practices of the Three Gorges Reservoir, particularly the development and application of regulation rules for flood management, power generation, water supply, ecosystem needs and sediment issues (e.g. erosion and siltation), are also presented. The experience obtained in the implementation of engineering measures in Changjiang River show that engineering measures are vital for IWRM. However, efforts should be made to deal with changes of the river system affected by the operation of engineering measures, in addition to escalatory development of new demands associated with socio-economic development.

  17. Integrated water resources management using engineering measures

    Directory of Open Access Journals (Sweden)

    Y. Huang

    2015-04-01

    Full Text Available The management process of Integrated Water Resources Management (IWRM consists of aspects of policies/strategies, measures (engineering measures and non-engineering measures and organizational management structures, etc., among which engineering measures such as reservoirs, dikes, canals, etc., play the backbone that enables IWRM through redistribution and reallocation of water in time and space. Engineering measures are usually adopted for different objectives of water utilization and water disaster prevention, such as flood control and drought relief. The paper discusses the planning and implementation of engineering measures in IWRM of the Changjiang River, China. Planning and implementation practices of engineering measures for flood control and water utilization, etc., are presented. Operation practices of the Three Gorges Reservoir, particularly the development and application of regulation rules for flood management, power generation, water supply, ecosystem needs and sediment issues (e.g. erosion and siltation, are also presented. The experience obtained in the implementation of engineering measures in Changjiang River show that engineering measures are vital for IWRM. However, efforts should be made to deal with changes of the river system affected by the operation of engineering measures, in addition to escalatory development of new demands associated with socio-economic development.

  18. Indicators and measurement tools for health system integration: a knowledge synthesis protocol.

    Science.gov (United States)

    Oelke, Nelly D; Suter, Esther; da Silva Lima, Maria Alice Dias; Van Vliet-Brown, Cheryl

    2015-07-29

    Health system integration is a key component of health system reform with the goal of improving outcomes for patients, providers, and the health system. Although health systems continue to strive for better integration, current delivery of health services continues to be fragmented. A key gap in the literature is the lack of information on what successful integration looks like and how to measure achievement towards an integrated system. This multi-site study protocol builds on a prior knowledge synthesis completed by two of the primary investigators which identified 10 key principles that collectively support health system integration. The aim is to answer two research questions: What are appropriate indicators for each of the 10 key integration principles developed in our previous knowledge synthesis and what measurement tools are used to measure these indicators? To enhance generalizability of the findings, a partnership between Canada and Brazil was created as health system integration is a priority in both countries and they share similar contexts. This knowledge synthesis will follow an iterative scoping review process with emerging information from knowledge-user engagement leading to the refinement of research questions and study selection. This paper describes the methods for each phase of the study. Research questions were developed with stakeholder input. Indicator identification and prioritization will utilize a modified Delphi method and patient/user focus groups. Based on priority indicators, a search of the literature will be completed and studies screened for inclusion. Quality appraisal of relevant studies will be completed prior to data extraction. Results will be used to develop recommendations and key messages to be presented through integrated and end-of-grant knowledge translation strategies with researchers and knowledge-users from the three jurisdictions. This project will directly benefit policy and decision-makers by providing an easy

  19. Substrate Integrated Evanescent Filters Employing Coaxial Stubs

    DEFF Research Database (Denmark)

    Zhurbenko, Vitaliy

    2015-01-01

    Evanescent mode substrate integrated waveguide (SIW) is one of the promising technologies for design of light-weight low-cost microwave components. Traditional realization methods used in the standard evanescent waveguide technology are often not directly applicable to SIW due to dielectric filli...... of the microwave filter are discussed. The approach is useful in applications where a sharp roll-off at the upper stop-band is required....

  20. Energy saving and recovery measures in integrated urban water systems

    Science.gov (United States)

    Freni, Gabriele; Sambito, Mariacrocetta

    2017-11-01

    The present paper describes different energy production, recovery and saving measures which can be applied in an integrated urban water system. Production measures are often based on the installation of photovoltaic systems; the recovery measures are commonly based on hydraulic turbines, exploiting the available pressure potential to produce energy; saving measures are based on substitution of old pumps with higher efficiency ones. The possibility of substituting some of the pipes of the water supply system can be also considered in a recovery scenario in order to reduce leakages and recovery part of the energy needed for water transport and treatment. The reduction of water losses can be obtained through the Active Leakage Control (ALC) strategies resulting in a reduction in energy consumption and in environmental impact. Measures were applied to a real case study to tested it the efficiency, i.e., the integrated urban water system of the Palermo metropolitan area in Sicily (Italy).

  1. Precise Charge Measurement For Laser Plasma Accelerators

    International Nuclear Information System (INIS)

    Nakamura, Kei; Gonsalves, Anthony; Lin, Chen; Sokollik, Thomas; Shiraishi, Satomi; van Tilborg, Jeroen; Osterhoff, Jens; Donahue, Rich; Rodgers, David; Smith, Alan; Byrne, Warren; Leemans, Wim

    2011-01-01

    Cross-calibrations of charge diagnostics are conducted to verify their validity for measuring electron beams produced by laser plasma accelerators (LPAs). Employed diagnostics are a scintillating screen, activation based measurement, and integrating current transformer. The diagnostics agreed within ±8 %, showing that they can provide accurate charge measurements for LPAs provided they are used properly.

  2. Vision and dual IMU integrated attitude measurement system

    Science.gov (United States)

    Guo, Xiaoting; Sun, Changku; Wang, Peng; Lu, Huang

    2018-01-01

    To determination relative attitude between two space objects on a rocking base, an integrated system based on vision and dual IMU (inertial determination unit) is built up. The determination system fuses the attitude information of vision with the angular determinations of dual IMU by extended Kalman filter (EKF) to obtain the relative attitude. One IMU (master) is attached to the measured motion object and the other (slave) to the rocking base. As the determination output of inertial sensor is relative to inertial frame, thus angular rate of the master IMU includes not only motion of the measured object relative to inertial frame but also the rocking base relative to inertial frame, where the latter can be seen as redundant harmful movement information for relative attitude determination between the measured object and the rocking base. The slave IMU here assists to remove the motion information of rocking base relative to inertial frame from the master IMU. The proposed integrated attitude determination system is tested on practical experimental platform. And experiment results with superior precision and reliability show the feasibility and effectiveness of the proposed attitude determination system.

  3. A competence-based and multidimensional operationalization and measurement of employability

    NARCIS (Netherlands)

    van der Heijde, C.M.; van der Heijden, Beatrice

    2006-01-01

    Employability is a critical requirement for enabling both sustained competitive advantage at the firm level and career success at the individual level. We propose a competence-based approach to employability derived from an expansion of the resource-based view of the firm. In this contribution, we

  4. Integrated Three-Voltage-Booster DC-DC Converter to Achieve High Voltage Gain with Leakage-Energy Recycling for PV or Fuel-Cell Power Systems

    Directory of Open Access Journals (Sweden)

    Chih-Lung Shen

    2015-09-01

    Full Text Available In this paper, an integrated three-voltage-booster DC-DC (direct current to direct current converter is proposed to achieve high voltage gain for renewable-energy generation systems. The proposed converter integrates three voltage-boosters into one power stage, which is composed of an active switch, a coupled-inductor, five diodes, and five capacitors. As compared with conventional high step-up converters, it has a lower component count. In addition, the features of leakage-energy recycling and switching loss reduction can be accomplished for conversion efficiency improvement. While the active switch is turned off, the converter can inherently clamp the voltage across power switch and suppress voltage spikes. Moreover, the reverse-recovery currents of all diodes can be alleviated by leakage inductance. A 200 W prototype operating at 100 kHz switching frequency with 36 V input and 400 V output is implemented to verify the theoretical analysis and to demonstrate the feasibility of the proposed high step-up DC-DC converter.

  5. Reproduction of pressure field in ultrasonic-measurement-integrated simulation of blood flow.

    Science.gov (United States)

    Funamoto, Kenichi; Hayase, Toshiyuki

    2013-07-01

    Ultrasonic-measurement-integrated (UMI) simulation of blood flow is used to analyze the velocity and pressure fields by applying feedback signals of artificial body forces based on differences of Doppler velocities between ultrasonic measurement and numerical simulation. Previous studies have revealed that UMI simulation accurately reproduces the velocity field of a target blood flow, but that the reproducibility of the pressure field is not necessarily satisfactory. In the present study, the reproduction of the pressure field by UMI simulation was investigated. The effect of feedback on the pressure field was first examined by theoretical analysis, and a pressure compensation method was devised. When the divergence of the feedback force vector was not zero, it influenced the pressure field in the UMI simulation while improving the computational accuracy of the velocity field. Hence, the correct pressure was estimated by adding pressure compensation to remove the deteriorating effect of the feedback. A numerical experiment was conducted dealing with the reproduction of a synthetic three-dimensional steady flow in a thoracic aneurysm to validate results of the theoretical analysis and the proposed pressure compensation method. The ability of the UMI simulation to reproduce the pressure field deteriorated with a large feedback gain. However, by properly compensating the effects of the feedback signals on the pressure, the error in the pressure field was reduced, exhibiting improvement of the computational accuracy. It is thus concluded that the UMI simulation with pressure compensation allows for the reproduction of both velocity and pressure fields of blood flow. Copyright © 2012 John Wiley & Sons, Ltd.

  6. The Balanced Scorecard and Beyond – Applying Theories of Performance Measurement, Employment and Rewards in Management Accounting Education

    OpenAIRE

    Eisenberg, Paul

    2016-01-01

    This study applies the prevailing scholarly theories of strategic management, employment decisions, cost accounting and share reward schemes to a panel of questions raised by Colin Drury (2012) in the case study of the fictitious company Integrated Technology Services (UK) Ltd., ITS (UK). The paper provides model answers which can be used when working with the case study at institutions of higher education. The merit of the work lies in three areas. First, it provides an overview of theories ...

  7. Measurement of time-integrated $D^0\\to hh$ asymmetries at LHCb

    CERN Document Server

    Marino, Pietro

    2016-01-01

    LHCb collected the world’s largest sample of charm decays during LHC Run I, corresponding to an integrated luminosity of 3fb$^{−1}$. This has permitted many precision measurements of charm mixing and CP violation parameters. One of the most precise and important observables is the so-called $\\Delta A_{CP}$ parameter, corresponding to the difference between the time-integrated CP asymmetry in singly Cabibbo-suppressed $D^{0} \\rightarrow K^{+}K^{-}$ and $D^{0} \\rightarrow \\pi^{+}\\pi{-}$ decay modes. The flavour of the $D^{0}$ meson is inferred from the charge of the pion in $D^{∗+} \\rightarrow D^{0}\\pi^{+}$ and $D^{∗−} \\rightarrow \\overline{D}^{0}\\pi^{-}$ decays. $\\Delta A_{CP} \\equiv A_{raw}(K^{+}K^{−})−A_{raw}(\\pi^{+}\\pi{−})$ is measured to be $\\Delta A_{CP}=(−0.10±0.08±0.03)$%, where the first uncertainty is statistical and the second systematic. The measurement is consistent with the no- CP -violation hypothesis and represents the most precise measurement of time-integrated CP asymmetry ...

  8. CMOS integrated avalanche photodiodes and frequency-mixing optical sensor front end for portable NIR spectroscopy instruments.

    Science.gov (United States)

    Yun, Ruida; Sthalekar, Chirag; Joyner, Valencia M

    2011-01-01

    This paper presents the design and measurement results of two avalanche photodiode structures (APDs) and a novel frequency-mixing transimpedance amplifier (TIA), which are key building blocks towards a monolithically integrated optical sensor front end for near-infrared (NIR) spectroscopy applications. Two different APD structures are fabricated in an unmodified 0.18 \\im CMOS process, one with a shallow trench isolation (STI) guard ring and the other with a P-well guard ring. The APDs are characterized in linear mode. The STI bounded APD demonstrates better performance and exhibits 3.78 A/W responsivity at a wavelength of 690 nm and bias voltage of 10.55 V. The frequency-mixing TIA (FM-TIA) employs a T-feedback network incorporating gate-controlled transistors for resistance modulation, enabling the simultaneous down-conversion and amplification of the high frequency modulated photodiode (PD) current. The TIA achieves 92 dS Ω conversion gain with 0.5 V modulating voltage. The measured IIP(3) is 10.6/M. The amplifier together with the 50 Ω output buffer draws 23 mA from a1.8 V power supply.

  9. Integration of extracellular RNA profiling data using metadata, biomedical ontologies and Linked Data technologies

    Directory of Open Access Journals (Sweden)

    Sai Lakshmi Subramanian

    2015-08-01

    Full Text Available The large diversity and volume of extracellular RNA (exRNA data that will form the basis of the exRNA Atlas generated by the Extracellular RNA Communication Consortium pose a substantial data integration challenge. We here present the strategy that is being implemented by the exRNA Data Management and Resource Repository, which employs metadata, biomedical ontologies and Linked Data technologies, such as Resource Description Framework to integrate a diverse set of exRNA profiles into an exRNA Atlas and enable integrative exRNA analysis. We focus on the following three specific data integration tasks: (a selection of samples from a virtual biorepository for exRNA profiling and for inclusion in the exRNA Atlas; (b retrieval of a data slice from the exRNA Atlas for integrative analysis and (c interpretation of exRNA analysis results in the context of pathways and networks. As exRNA profiling gains wide adoption in the research community, we anticipate that the strategies discussed here will increasingly be required to enable data reuse and to facilitate integrative analysis of exRNA data.

  10. Integration of extracellular RNA profiling data using metadata, biomedical ontologies and Linked Data technologies.

    Science.gov (United States)

    Subramanian, Sai Lakshmi; Kitchen, Robert R; Alexander, Roger; Carter, Bob S; Cheung, Kei-Hoi; Laurent, Louise C; Pico, Alexander; Roberts, Lewis R; Roth, Matthew E; Rozowsky, Joel S; Su, Andrew I; Gerstein, Mark B; Milosavljevic, Aleksandar

    2015-01-01

    The large diversity and volume of extracellular RNA (exRNA) data that will form the basis of the exRNA Atlas generated by the Extracellular RNA Communication Consortium pose a substantial data integration challenge. We here present the strategy that is being implemented by the exRNA Data Management and Resource Repository, which employs metadata, biomedical ontologies and Linked Data technologies, such as Resource Description Framework to integrate a diverse set of exRNA profiles into an exRNA Atlas and enable integrative exRNA analysis. We focus on the following three specific data integration tasks: (a) selection of samples from a virtual biorepository for exRNA profiling and for inclusion in the exRNA Atlas; (b) retrieval of a data slice from the exRNA Atlas for integrative analysis and (c) interpretation of exRNA analysis results in the context of pathways and networks. As exRNA profiling gains wide adoption in the research community, we anticipate that the strategies discussed here will increasingly be required to enable data reuse and to facilitate integrative analysis of exRNA data.

  11. Unequal Gain of Equal Resources across Racial Groups.

    Science.gov (United States)

    Assari, Shervin

    2017-08-05

    The health effects of economic resources (eg, education, employment, and living place) and psychological assets (eg, self-efficacy, perceived control over life, anger control, and emotions) are well-known. This article summarizes the results of a growing body of evidence documenting Blacks' diminished return, defined as a systematically smaller health gain from economic resources and psychological assets for Blacks in comparison to Whites. Due to structural barriers that Blacks face in their daily lives, the very same resources and assets generate smaller health gain for Blacks compared to Whites. Even in the presence of equal access to resources and assets, such unequal health gain constantly generates a racial health gap between Blacks and Whites in the United States. In this paper, a number of public policies are recommended based on these findings. First and foremost, public policies should not merely focus on equalizing access to resources and assets, but also reduce the societal and structural barriers that hinder Blacks. Policy solutions should aim to reduce various manifestations of structural racism including but not limited to differential pay, residential segregation, lower quality of education, and crime in Black and urban communities. As income was not found to follow the same pattern demonstrated for other resources and assets (ie, income generated similar decline in risk of mortality for Whites and Blacks), policies that enforce equal income and increase minimum wage for marginalized populations are essential. Improving quality of education of youth and employability of young adults will enable Blacks to compete for high paying jobs. Policies that reduce racism and discrimination in the labor market are also needed. Without such policies, it will be very difficult, if not impossible, to eliminate the sustained racial health gap in the United States. © 2018 The Author(s); Published by Kerman University of Medical Sciences. This is an open

  12. On set-valued functionals: Multivariate risk measures and Aumann integrals

    Science.gov (United States)

    Ararat, Cagin

    In this dissertation, multivariate risk measures for random vectors and Aumann integrals of set-valued functions are studied. Both are set-valued functionals with values in a complete lattice of subsets of Rm. Multivariate risk measures are considered in a general d-asset financial market with trading opportunities in discrete time. Specifically, the following features of the market are incorporated in the evaluation of multivariate risk: convex transaction costs modeled by solvency regions, intermediate trading constraints modeled by convex random sets, and the requirement of liquidation into the first m ≤ d of the assets. It is assumed that the investor has a "pure" multivariate risk measure R on the space of m-dimensional random vectors which represents her risk attitude towards the assets but does not take into account the frictions of the market. Then, the investor with a d-dimensional position minimizes the set-valued functional R over all m-dimensional positions that she can reach by trading in the market subject to the frictions described above. The resulting functional Rmar on the space of d-dimensional random vectors is another multivariate risk measure, called the market-extension of R. A dual representation for R mar that decomposes the effects of R and the frictions of the market is proved. Next, multivariate risk measures are studied in a utility-based framework. It is assumed that the investor has a complete risk preference towards each individual asset, which can be represented by a von Neumann-Morgenstern utility function. Then, an incomplete preference is considered for multivariate positions which is represented by the vector of the individual utility functions. Under this structure, multivariate shortfall and divergence risk measures are defined as the optimal values of set minimization problems. The dual relationship between the two classes of multivariate risk measures is constructed via a recent Lagrange duality for set optimization. In

  13. Low Gain Avalanche Detectors (LGAD) for particle physics and synchrotron applications

    Science.gov (United States)

    Moffat, N.; Bates, R.; Bullough, M.; Flores, L.; Maneuski, D.; Simon, L.; Tartoni, N.; Doherty, F.; Ashby, J.

    2018-03-01

    A new avalanche silicon detector concept is introduced with a low gain in the region of ten, known as a Low Gain Avalanche Detector, LGAD. The detector's characteristics are simulated via a full process simulation to obtain the required doping profiles which demonstrate the desired operational characteristics of high breakdown voltage (500 V) and a gain of 10 at 200 V reverse bias for X-ray detection. The first low gain avalanche detectors fabricated by Micron Semiconductor Ltd are presented. The doping profiles of the multiplication junctions were measured with SIMS and reproduced by simulating the full fabrication process which enabled further development of the manufacturing process. The detectors are 300 μm thick p-type silicon with a resistivity of 8.5 kΩcm, which fully depletes at 116 V. The current characteristics are presented and demonstrate breakdown voltages in excess of 500 V and a current density of 40 to 100 nAcm‑2 before breakdown measured at 20oC. The gain of the LGAD has been measured with a red laser (660 nm) and shown to be between 9 and 12 for an external bias voltage range from 150 V to 300 V.

  14. Machine integrated optical measurement of honed surfaces in presence of cooling lubricant

    International Nuclear Information System (INIS)

    Schmitt, R; Koenig, N; Zheng, H

    2011-01-01

    The measurement of honed surfaces is one of the most important tasks in tribology. Although many established techniques exist for texture characterization, such as SEM, tactile stylus or white-light interferometry, none of them is suited for a machine integrated measurement. Harsh conditions such as the presence of cooling lubricant or vibrations prohibit the use of commercial sensors inside a honing machine. Instead, machined engine blocks need time-consuming cleaning and preparation while taken out of the production line for inspection. A full inspection of all produced parts is hardly possible this way. Within this paper, an approach for a machine-integrated measurement is presented, which makes use of optical sensors for texture profiling. The cooling lubricant here serves as immersion medium. The results of test measurements with a chromatic-confocal sensor and a fiber-optical low-coherence interferometer show the potential of both measuring principles for our approach. Cooling lubricant temperature and flow, scanning speed and measurement frequency have been varied in the tests. The sensor with best performance will later be chosen for machine integration.

  15. Employment for adults with autism spectrum disorders: A retrospective review of a customized employment approach.

    Science.gov (United States)

    Wehman, Paul; Brooke, Valerie; Brooke, Alissa Molinelli; Ham, Whitney; Schall, Carol; McDonough, Jennifer; Lau, Stephanie; Seward, Hannah; Avellone, Lauren

    2016-01-01

    Over the past few decades, there has been an increase in prevalence of children with autism spectrum disorders (ASD), and those children are now becoming young adults in need of competitive integrated employment (CIE). Customized employment (CE) is one pathway to employment that has been successful for other individuals with developmental disabilities (DD), though research has been very limited on the effectiveness with individuals with ASD. This paper provides a retrospective review of 64 individuals with ASD who came to our program from 2009 to 2014 for supported employment services as referred by the state vocational rehabilitation services agency. Employment specialists engaged in situational assessment, discovery, job development, customized job descriptions, on-site training and support, positive behavioral supports, and job retention techniques. The employment specialists were responsible for tracking their actual time spent working directly with or for the jobseeker with autism spectrum disorders (ASD). All vocational rehabilitation clients with ASD served during this time successfully secured CIE, and maintained their employment with ongoing supports, with intensity of support time decreasing over time. The majority (63/64, 98.4%) of individuals successfully secured CIE through the use of supported employment, in 72 unique employment positions. Of the majority of the individuals who secured employment, 77% (50) individuals indicated that they had never worked before and additional 18% (12) reported having short intermittent histories of employment. Despite this lack of employment experience, in all cases the jobseeker directed the job search and ultimately the job selection. Copyright © 2016 Elsevier Ltd. All rights reserved.

  16. Employee Selection Process: Integrating Employee Needs and Employer Motivators.

    Science.gov (United States)

    Carroll, Brian J.

    1989-01-01

    Offers suggestions for managers relative to the employee selection process, focusing on the identification of a potential employee's needs and the employer's motivators that affect employee productivity. Discusses the use of a preemployment survey and offers a questionnaire that allows matching of the employee's needs with employment…

  17. Employment and Regional Inequality in Romania

    Directory of Open Access Journals (Sweden)

    Laura Patache

    2013-08-01

    Full Text Available It is no doubt that thinking about inequality plays a part in the judgments and actions of politicians, sociologists, economists and ordinary people, too. This paper examines which factors substantially influenced regional employment. Labour market, employment and unemployment have been the subject of various researches and the labour market object has been subject of dispute. Employment and unemployment are both decomposed and analyzed through separate components (such as: full employment, effective employment, atypical employment, precarious employment, regional/local employment etc., respectively, total unemployment, partial or hidden unemployment, technical and structural one and so on. The specific literature about the regional inequalities considered the income per capita as the most relevant indicator measured by Gini coefficient. Gini index measures the extent to which the distribution of income or consumption expenditure among individuals or households within an economy deviates from a perfectly equal distribution. At regional level we studied several indicators that generate regional disparities, and influence employment quality such us: employment rate, tertiary and medium employment, unemployment rate, occupied population in informal sector, employment in primary sector, rural employment, female employment. We developed a scoring based on the deviation from the average of a group of key indicators and devised a map of employment quality resulting from multi-criteria analysis.

  18. Utilizing wideband AMC structures for high-gain inkjet-printed antennas on lossy paper substrate

    KAUST Repository

    Cook, Benjamin Stassen

    2013-01-01

    Significant gain and bandwidth improvement of inkjet-printed antennas with integrated artificial magnetic conductor (AMC) is achieved by utilizing wideband ground-backed frequency selective surfaces (FSSs) to overcome the high losses of organic substrates such as paper. A microstrip-fed monopole mounted on an artificial magnetic conductor is demonstrated to improve the gain by 5 dB over previous works and exhibit much wider impedance bandwidth while maintaining a thin antenna profile and a 20% electrical size reduction. The effect of AMC bandwidth on substrate losses and the gain reduction caused by finite AMC array effects are investigated in an effort to produce high-gain, miniaturized, low-cost wearable and structure mount antennas. © 2013 IEEE.

  19. Feed intake, live mass-gain, body composition and protein ...

    African Journals Online (AJOL)

    Appropriate regression relationships were used to measure the effect of dietary protein level on the patterns of DE intake, daily gain and the deposition rates of protein (PDR) and fat (FDR) over the growth period 30-90 kg live mass. Dietary CP content had no significant effect on mean voluntary DE intakes and daily gains.

  20. Establishing and integrating performance measures : a TPCB peer exchange

    Science.gov (United States)

    2015-08-31

    This report highlights key recommendations and noteworthy practices identified at Establishing and Integrating Performance Measures Peer Exchange held on April 27-28, 2015 in Dimondale, Michigan and via video teleconference. This event was spon...

  1. Summary of Pressure Gain Combustion Research at NASA

    Science.gov (United States)

    Perkins, H. Douglas; Paxson, Daniel E.

    2018-01-01

    NASA has undertaken a systematic exploration of many different facets of pressure gain combustion over the last 25 years in an effort to exploit the inherent thermodynamic advantage of pressure gain combustion over the constant pressure combustion process used in most aerospace propulsion systems. Applications as varied as small-scale UAV's, rotorcraft, subsonic transports, hypersonics and launch vehicles have been considered. In addition to studying pressure gain combustor concepts such as wave rotors, pulse detonation engines, pulsejets, and rotating detonation engines, NASA has studied inlets, nozzles, ejectors and turbines which must also process unsteady flow in an integrated propulsion system. Other design considerations such as acoustic signature, combustor material life and heat transfer that are unique to pressure gain combustors have also been addressed in NASA research projects. In addition to a wide range of experimental studies, a number of computer codes, from 0-D up through 3-D, have been developed or modified to specifically address the analysis of unsteady flow fields. Loss models have also been developed and incorporated into these codes that improve the accuracy of performance predictions and decrease computational time. These codes have been validated numerous times across a broad range of operating conditions, and it has been found that once validated for one particular pressure gain combustion configuration, these codes are readily adaptable to the others. All in all, the documentation of this work has encompassed approximately 170 NASA technical reports, conference papers and journal articles to date. These publications are very briefly summarized herein, providing a single point of reference for all of NASA's pressure gain combustion research efforts. This documentation does not include the significant contributions made by NASA research staff to the programs of other agencies, universities, industrial partners and professional society

  2. Behavioral factors predicting response to employment-based reinforcement of cocaine abstinence in methadone patients

    OpenAIRE

    Holtyn, August F.; Washington, Wendy Donlin; Knealing, Todd W.; Wong, Conrad J.; Kolodner, Ken; Silverman, Kenneth

    2016-01-01

    We sought to identify behavioral factors associated with response to an employment-based intervention, in which participants had to provide drug-free urine samples to gain access to paid employment. The present secondary analysis included data from a randomized clinical trial. The trial evaluated whether employment-based reinforcement could decrease cocaine use in community methadone patients. Participants (N=56) in the trial worked in a model workplace for 4 hr every weekday and earned about...

  3. Can Rural Employment Benefit from Changing Labor Skills in U.S. Processed Food Trade?

    Science.gov (United States)

    Schluter, Gerald; Lee, Chinkook

    2002-01-01

    The 1990s saw a gain in rural food-processing employment, particularly meat packing and poultry processing, as the industry's demand for low-skilled workers increased. Analysis links the change in worker skills to international trade. While increased rural employment may seem beneficial, the jobs often do not appeal to rural domestic workers, and…

  4. Perception of gain in U.S.-Soviet arms control

    International Nuclear Information System (INIS)

    D'Anieri, P.J.

    1991-01-01

    Most current work in the field of international cooperation focuses on the resolution of the 'prisoners dilemma.' Such work begins by assuming that the issues under consideration are defined by absolute gains, where both sides can gain simultaneously. But the realist strand of international relations literature holds that this assumption is suspect - that international relations are usually characterized by relative gains, where gain for one side comes only at the others expense. The model developed here uses the question of absolute versus relative gains not as a theoretical assumption, but as a variable to be measured empirically. The hypothesis is that whether or not the US and the Soviet Union cooperate to limit arms competition is largely determined by whether the two sides define the issue in question as one of absolute or relative gains. The 'perception of gain' hypothesis is compared to explanations at the levels of the international system (rational choice), domestic politics, and individual belief systems. Three case studies are used to compare the strengths and weaknesses of each hypothesis. The findings confirmed that perception of gain is an important independent variable affecting arms control outcomes, but none of the theories were completely supported or rejected

  5. Inkjet printing of novel wideband and high gain antennas on low-cost paper substrate

    KAUST Repository

    Cook, Benjamin Stassen; Shamim, Atif

    2012-01-01

    for the UWB band which exhibits a significantly higher gain of up to 8 dBi as compared to the currently published inkjet printed antennas, and a novel slow-wave log periodic dipole array which employs a new miniaturization technique to show 20% width reduction

  6. Investing in Women’s Employment : Good for Business, Good for Development

    OpenAIRE

    International Finance Corporation

    2013-01-01

    Economic growth is more robust and sustainable when women and men alike participate fully in the labor market. Better jobs for women, employment that leads to higher wages and greater decision-making, also have a positive influence on the ways households spend money on children s nutrition, health, and education. Meanwhile, companies that invest in women s employment gain an important competitive advantage. Yet despite the persuasive evidence that gender equality has a transformative effect o...

  7. PV source based high voltage gain current fed converter

    Science.gov (United States)

    Saha, Soumya; Poddar, Sahityika; Chimonyo, Kudzai B.; Arunkumar, G.; Elangovan, D.

    2017-11-01

    This work involves designing and simulation of a PV source based high voltage gain, current fed converter. It deals with an isolated DC-DC converter which utilizes boost converter topology. The proposed converter is capable of high voltage gain and above all have very high efficiency levels as proved by the simulation results. The project intends to produce an output of 800 V dc from a 48 V dc input. The simulation results obtained from PSIM application interface were used to analyze the performance of the proposed converter. Transformer used in the circuit steps up the voltage as well as to provide electrical isolation between the low voltage and high voltage side. Since the converter involves high switching frequency of 100 kHz, ultrafast recovery diodes are employed in the circuitry. The major application of the project is for future modeling of solar powered electric hybrid cars.

  8. Integrating Research to Reduce Risk and Gain the Benefits for Development

    Science.gov (United States)

    Mcbean, G. A.

    2015-12-01

    Across all countries there are challenges due to the increasing numbers of hazards creating disasters and impacting on people and property and limiting development. These impacts, in a relative sense relative to population and economy, are larger in developing countries and small island states. The issues of disaster risk reduction, sustainable development goals and climate change mitigation and adaptation are key global issues being addressed through international processes in 2015. Internationally coordinated research, through programs such as Integrated Research on Disaster Risk, Future Earth: Research for Global Sustainability and Health and Wellbeing in the Changing Urban Environment, needs to be supported and their research coordinated so the outputs are effective in policy development and can be used by all countries. A particular challenge is with regard to those extreme and relatively rare events that have huge impacts but societies are not yet effective in "making timely decisions and implementation of the hazard-associated preparedness measures to mitigate humanitarian and economic losses". The challenge for the scientific community is to work with stakeholder communities through a co-design, co-produce and co-deliver approach to enhance the relevance and effectiveness of our science.

  9. A wideband LNA employing gate-inductive-peaking and noise-canceling techniques in 0.18 μm CMOS

    International Nuclear Information System (INIS)

    Bao Kuan; Fan Xiangning; Li Wei; Zhang Li; Wang Zhigong

    2012-01-01

    This paper presents a wideband low noise amplifier (LNA) for multi-standard radio applications. The low noise characteristic is achieved by the noise-canceling technique while the bandwidth is enhanced by gate-inductive-peaking technique. High-frequency noise performance is consequently improved by the flattened gain over the entire operating frequency band. Fabricated in 0.18 μm CMOS process, the LNA achieves 2.5 GHz of −3 dB bandwidth and 16 dB of gain. The gain variation is within ±0.8 dB from 300 MHz to 2.2 GHz. The measured noise figure (NF) and average IIP3 are 3.4 dB and −2 dBm, respectively. The proposed LNA occupies 0.39 mm 2 core chip area. Operating at 1.8 V, the LNA drains a current of 11.7 mA. (semiconductor integrated circuits)

  10. Three-dimensional analysis of harmonic generation in high-gain free-electron lasers

    International Nuclear Information System (INIS)

    Huang, Zhirong; Kim, Kwang-Je

    2000-01-01

    In a high-gain free-electron laser (FEL) employing a planar undulator, strong bunching at the fundamental wavelength can drive substantial bunching and power levels at the harmonic frequencies. In this paper we investigate the three-dimensional evolution of harmonic radiation based on the coupled Maxwell-Klimontovich equations that take into account nonlinear harmonic interactions. Each harmonic field is a sum of a linear amplification term and a term driven by nonlinear harmonic interactions. After a certain stage of exponential growth, the dominant nonlinear term is determined by interactions of the lower nonlinear harmonics and the fundamental radiation. As a result, the gain length, transverse profile, and temporal structure of the first few harmonics are eventually governed by those of the fundamental. Transversely coherent third-harmonic radiation power is found to approach 1% of the fundamental power level for current high-gain FEL projects

  11. SiPM Gain Stabilization Studies for Adaptive Power Supply

    CERN Document Server

    AUTHOR|(CDS)2074257; Zalieckas, Justas; Cvach, Jaroslav; Kvasnicka, Jiri; Polak, Ivo

    2016-01-01

    We present herein gain stabilization studies of SiPMs using a climate chamber at CERN. We present results for four detectors not tested before, three from Hamamatsu and one from KETEK. Two of the Hamamatsu SiPMs are novel sensors with trenches that reduce cross talk. We use an improved readout system with a digital oscilloscope controlled with a dedicated LabView program. We improved and automized the analysis to deal with large datasets. We have measured the gain-versus-bias-voltage dependence at fixed temperature and gain-versus-temperature dependence at fixed bias voltage to determine the bias voltage dependence on temperature $V(T)$ for stable gain. We show that the gain remains stable to better than $\\pm 0.5\\%$ in the $20^\\circ \\rm C - 30^\\circ C$ temperature range if the bias voltage is properly adjusted with temperature.

  12. Integration of quantum cascade lasers and passive waveguides

    Energy Technology Data Exchange (ETDEWEB)

    Montoya, Juan, E-mail: juan.montoya@ll.mit.edu; Wang, Christine; Goyal, Anish; Creedon, Kevin; Connors, Michael; Daulton, Jeffrey; Donnelly, Joseph; Missaggia, Leo; Aleshire, Chris; Sanchez-Rubio, Antonio; Herzog, William [MIT Lincoln Laboratory, 244 Wood St, Lexington, Massachusetts 02420 (United States)

    2015-07-20

    We report on monolithic integration of active quantum cascade laser (QCL) materials with passive waveguides formed by using proton implantation. Proton implantation reduces the electron concentration in the QCL layers by creating deep levels that trap carriers. This strongly reduces the intersubband absorption and the free-carrier absorption in the gain region and surrounding layers, thus significantly reducing optical loss. We have measured loss as low as α = 0.33 cm{sup −1} in λ = 9.6 μm wavelength proton-implanted QCL material. We have also demonstrated lasing in active-passive integrated waveguides. This simple integration technique is anticipated to enable low-cost fabrication in infrared photonic integrated circuits in the mid-infrared (λ ∼ 3–16 μm)

  13. Integration of quantum cascade lasers and passive waveguides

    International Nuclear Information System (INIS)

    Montoya, Juan; Wang, Christine; Goyal, Anish; Creedon, Kevin; Connors, Michael; Daulton, Jeffrey; Donnelly, Joseph; Missaggia, Leo; Aleshire, Chris; Sanchez-Rubio, Antonio; Herzog, William

    2015-01-01

    We report on monolithic integration of active quantum cascade laser (QCL) materials with passive waveguides formed by using proton implantation. Proton implantation reduces the electron concentration in the QCL layers by creating deep levels that trap carriers. This strongly reduces the intersubband absorption and the free-carrier absorption in the gain region and surrounding layers, thus significantly reducing optical loss. We have measured loss as low as α = 0.33 cm −1 in λ = 9.6 μm wavelength proton-implanted QCL material. We have also demonstrated lasing in active-passive integrated waveguides. This simple integration technique is anticipated to enable low-cost fabrication in infrared photonic integrated circuits in the mid-infrared (λ ∼ 3–16 μm)

  14. INTEGRATION POLICY TOWARDS IMMIGRANTS: CURRENT EXPERIENCE

    Directory of Open Access Journals (Sweden)

    Nadiia Bureiko

    2012-03-01

    Full Text Available In the contemporary world the intensity of the immigration movements is constantly increasing. Countries which experience great immigrant flows are facing numerous problems which should be solved. The article studies the current immigration flows in EU countries, the United States of America and Canada and presents three main models of integration policy towards immigrants – political assimilation, functional integration and multicultural model. Separate models are distinguished for the Muslims’ integration. The author examines the peculiarities of every model and examines the conclusions provided by the Migrant Integration Policy Index (MIPEX concerning the situation of the immigrants’ integration in 31 countries in 2011. Among all the policy indicators the first that are defined are as follows: political participation, education, labour market mobility and anti-discrimination. The situation with immigrants’ integration in Ukraine is also studied as it is gaining a great attention of the authorities and the public. The measures and practical steps done regarding this situation in Ukraine in recent years are analyzed using the information offered by the State Migration Service of Ukraine.

  15. Defining and measuring integrated patient care: promoting the next frontier in health care delivery.

    Science.gov (United States)

    Singer, Sara J; Burgers, Jako; Friedberg, Mark; Rosenthal, Meredith B; Leape, Lucian; Schneider, Eric

    2011-02-01

    Integration of care is emerging as a central challenge of health care delivery, particularly for patients with multiple, complex chronic conditions. The authors argue that the concept of "integrated patient care" would benefit from further clarification regarding (a) the object of integration and (b) its essential components, particularly when constructing measures.To address these issues, the authors propose a definition of integrated patient care that distinguishes it from integrated delivery organizations, acknowledging that integrated organizational structures and processes may fail to produce integrated patient care. The definition emphasizes patients' central role as active participants in managing their own health by including patient centeredness as a key element of integrated patient care. Measures based on the proposed definition will enable empirical assessment of the potential relationships between the integration of organizations, the integration of patient care, and patient outcomes, providing valuable guidance to health systems reformers.

  16. MOS current gain cells with electronically variable gain and constant bandwidth

    NARCIS (Netherlands)

    Klumperink, Eric A.M.; Seevinck, Evert

    1989-01-01

    Two MOS current gain cells are proposed that provide linear amplification of currents supplied by several linear MOS V-I converters. The gain is electronically variable by a voltage or a current and can be made insensitive to temperature and IC processing. The gain cells have a constant

  17. ‘Placement budgets’ for supported employment – improving competitive employment for people with mental illness: study protocol of a multicentre randomized controlled trial

    Directory of Open Access Journals (Sweden)

    Nordt Carlos

    2012-10-01

    Full Text Available Abstract Background Vocational integration of people with mental illness is poor despite their willingness to work. The ‘Individual Placement and Support’ (IPS model which emphasises rapid and direct job placement and continuing support to patient and employer has proven to be the most effective vocational intervention programme. Various studies have shown that every second patient with severe mental illness was able to find competitive employment within 18 months. However, the goal of taking up employment within two months was rarely achieved. Thus, we aim to test whether the new concept of limited placement budgets increases the effectiveness of IPS. Methods/Design Six job coaches in six out-patients psychiatric clinics in the Canton of Zurich support unemployed patients of their clinic who seek competitive employment. Between June 2010 and May 2011 patients (N=100 are randomly assigned to three different placement budgets of 25h, 40h, or 55h working hours of job coaches. Support lasts two years for those who find a job. The intervention ends for those who fail to find competitive employment when the respective placement budgets run out. The primary outcome measure is the time between study inclusion and first competitive employment that lasted three months or longer. Over a period of three years interviews are carried out every six months to measure changes in motivation, stigmatization, social network and social support, quality of life, job satisfaction, financial situation, and health conditions. Cognitive and social-cognitive tests are conducted at baseline to control for confounding variables. Discussion This study will show whether the effectiveness of IPS can be increased by the new concept of limited placement budgets. It will also be examined whether competitive employment leads in the long term to an improvement of mental illness, to a transfer of the psychiatric support system to private and vocational networks, to an increase

  18. Evaluating airline energy efficiency: An integrated approach with Network Epsilon-based Measure and Network Slacks-based Measure

    International Nuclear Information System (INIS)

    Xu, Xin; Cui, Qiang

    2017-01-01

    This paper focuses on evaluating airline energy efficiency, which is firstly divided into four stages: Operations Stage, Fleet Maintenance Stage, Services Stage and Sales Stage. The new four-stage network structure of airline energy efficiency is a modification of existing models. A new approach, integrated with Network Epsilon-based Measure and Network Slacks-based Measure, is applied to assess the overall energy efficiency and divisional efficiency of 19 international airlines from 2008 to 2014. The influencing factors of airline energy efficiency are analyzed through the regression analysis. The results indicate the followings: 1. The integrated model can identify the benchmarking airlines in the overall system and stages. 2. Most airlines' energy efficiencies keep steady during the period, except for some sharply fluctuations. The efficiency decreases mainly centralized in the year 2008–2011, affected by the financial crisis in the USA. 3. The average age of fleet is positively correlated with the overall energy efficiency, and each divisional efficiency has different significant influencing factors. - Highlights: • An integrated approach with Network Epsilon-based Measure and Network Slacks-based Measure is developed. • 19 airlines' energy efficiencies are evaluated. • Garuda Indonesia has the highest overall energy efficiency.

  19. A 60-dB linear VGA with novel exponential gain approximation

    International Nuclear Information System (INIS)

    Zhou Jiaye; Tan Xi; Wang Junyu; Tang Zhangwen; Min Hao

    2009-01-01

    A CMOS variable gain amplifier (VGA) that adopts a novel exponential gain approximation is presented. No additional exponential gain control circuit is required in the proposed VGA used in a direct conversion receiver. A wide gain control voltage from 0.4 to 1.8 V and a high linearity performance are achieved. The three-stage VGA with automatic gain control (AGC) and DC offset cancellation (DCOC) is fabricated in a 0.18-μm CMOS technology and shows a linear gain range of more than 58-dB with a linearity error less than ±1 dB. The 3-dB bandwidth is over 8 MHz at all gain settings. The measured input-referred third intercept point (IIP3) of the proposed VGA varies from -18.1 to 13.5 dBm, and the measured noise figure varies from 27 to 65 dB at a frequency of 1 MHz. The dynamic range of the closed-loop AGC exceeds 56 dB, where the output signal-to-noise-and-distortion ratio (SNDR) reaches 20 dB. The whole circuit, occupying 0.3 mm 2 of chip area, dissipates less than 3.7 mA from a 1.8-V supply.

  20. Immigrants’ Paths to Employment in Finland

    Directory of Open Access Journals (Sweden)

    Aini Pehkonen

    2006-01-01

    Full Text Available The aim of this study was to investigate how immigrants have integrated into Finnish life from the standpoints of employment. The empirical research material consisted of 30 interviews with immigrants and four interviews with of? cials and others dealing with immigrant affairs. Factors promoting employment of immigrants were the voluntary nature of the immigration, educational quali? cations as demonstrated by the relevant certi? cates and knowledge of the Finnish language. One in three reported that they had ? rst received information about vacancies from the Employment Of? ce, and one in ? ve by approaching the employer directly asking for work. One in seven had found out about jobs through friends.

  1. An employer brand predictive model for talent attraction and retention

    OpenAIRE

    Annelize Botha; Mark Bussin; Lukas de Swardt

    2011-01-01

    Orientation: In an ever shrinking global talent pool organisations use employer brand to attract and retain talent, however, in the absence of theoretical pointers, many organisations are losing out on a powerful business tool by not developing or maintaining their employer brand correctly. Research purpose: This study explores the current state of knowledge about employer brand and identifies the various employer brand building blocks which are conceptually integrated in a predictiv...

  2. Integrated cost-effectiveness analysis of agri-environmental measures for water quality.

    Science.gov (United States)

    Balana, Bedru B; Jackson-Blake, Leah; Martin-Ortega, Julia; Dunn, Sarah

    2015-09-15

    This paper presents an application of integrated methodological approach for identifying cost-effective combinations of agri-environmental measures to achieve water quality targets. The methodological approach involves linking hydro-chemical modelling with economic costs of mitigation measures. The utility of the approach was explored for the River Dee catchment in North East Scotland, examining the cost-effectiveness of mitigation measures for nitrogen (N) and phosphorus (P) pollutants. In-stream nitrate concentration was modelled using the STREAM-N and phosphorus using INCA-P model. Both models were first run for baseline conditions and then their effectiveness for changes in land management was simulated. Costs were based on farm income foregone, capital and operational expenditures. The costs and effects data were integrated using 'Risk Solver Platform' optimization in excel to produce the most cost-effective combination of measures by which target nutrient reductions could be attained at a minimum economic cost. The analysis identified different combination of measures as most cost-effective for the two pollutants. An important aspect of this paper is integration of model-based effectiveness estimates with economic cost of measures for cost-effectiveness analysis of land and water management options. The methodological approach developed is not limited to the two pollutants and the selected agri-environmental measures considered in the paper; the approach can be adapted to the cost-effectiveness analysis of any catchment-scale environmental management options. Copyright © 2015 Elsevier Ltd. All rights reserved.

  3. A precision analogue integrator system for heavy current measurement in MFDC resistance spot welding

    International Nuclear Information System (INIS)

    Xia, Yu-Jun; Zhang, Zhong-Dian; Xia, Zhen-Xin; Zhu, Shi-Liang; Zhang, Rui

    2016-01-01

    In order to control and monitor the quality of middle frequency direct current (MFDC) resistance spot welding (RSW), precision measurement of the welding current up to 100 kA is required, for which Rogowski coils are the only viable current transducers at present. Thus, a highly accurate analogue integrator is the key to restoring the converted signals collected from the Rogowski coils. Previous studies emphasised that the integration drift is a major factor that influences the performance of analogue integrators, but capacitive leakage error also has a significant impact on the result, especially in long-time pulse integration. In this article, new methods of measuring and compensating capacitive leakage error are proposed to fabricate a precision analogue integrator system for MFDC RSW. A voltage holding test is carried out to measure the integration error caused by capacitive leakage, and an original integrator with a feedback adder is designed to compensate capacitive leakage error in real time. The experimental results and statistical analysis show that the new analogue integrator system could constrain both drift and capacitive leakage error, of which the effect is robust to different voltage levels of output signals. The total integration error is limited within  ±0.09 mV s −1 0.005% s −1 or full scale at a 95% confidence level, which makes it possible to achieve the precision measurement of the welding current of MFDC RSW with Rogowski coils of 0.1% accuracy class. (paper)

  4. Cultural adaptation and translation of measures: an integrated method.

    Science.gov (United States)

    Sidani, Souraya; Guruge, Sepali; Miranda, Joyal; Ford-Gilboe, Marilyn; Varcoe, Colleen

    2010-04-01

    Differences in the conceptualization and operationalization of health-related concepts may exist across cultures. Such differences underscore the importance of examining conceptual equivalence when adapting and translating instruments. In this article, we describe an integrated method for exploring conceptual equivalence within the process of adapting and translating measures. The integrated method involves five phases including selection of instruments for cultural adaptation and translation; assessment of conceptual equivalence, leading to the generation of a set of items deemed to be culturally and linguistically appropriate to assess the concept of interest in the target community; forward translation; back translation (optional); and pre-testing of the set of items. Strengths and limitations of the proposed integrated method are discussed. (c) 2010 Wiley Periodicals, Inc.

  5. Multi-attribute integrated measurement of node importance in complex networks.

    Science.gov (United States)

    Wang, Shibo; Zhao, Jinlou

    2015-11-01

    The measure of node importance in complex networks is very important to the research of networks stability and robustness; it also can ensure the security of the whole network. Most researchers have used a single indicator to measure the networks node importance, so that the obtained measurement results only reflect certain aspects of the networks with a loss of information. Meanwhile, because of the difference of networks topology, the nodes' importance should be described by combining the character of the networks topology. Most of the existing evaluation algorithms cannot completely reflect the circumstances of complex networks, so this paper takes into account the degree of centrality, the relative closeness centrality, clustering coefficient, and topology potential and raises an integrated measuring method to measure the nodes' importance. This method can reflect nodes' internal and outside attributes and eliminate the influence of network structure on the node importance. The experiments of karate network and dolphin network show that networks topology structure integrated measure has smaller range of metrical result than a single indicator and more universal. Experiments show that attacking the North American power grid and the Internet network with the method has a faster convergence speed than other methods.

  6. Vertically integrated, three-dimensional nanowire complementary metal-oxide-semiconductor circuits.

    Science.gov (United States)

    Nam, SungWoo; Jiang, Xiaocheng; Xiong, Qihua; Ham, Donhee; Lieber, Charles M

    2009-12-15

    Three-dimensional (3D), multi-transistor-layer, integrated circuits represent an important technological pursuit promising advantages in integration density, operation speed, and power consumption compared with 2D circuits. We report fully functional, 3D integrated complementary metal-oxide-semiconductor (CMOS) circuits based on separate interconnected layers of high-mobility n-type indium arsenide (n-InAs) and p-type germanium/silicon core/shell (p-Ge/Si) nanowire (NW) field-effect transistors (FETs). The DC voltage output (V(out)) versus input (V(in)) response of vertically interconnected CMOS inverters showed sharp switching at close to the ideal value of one-half the supply voltage and, moreover, exhibited substantial DC gain of approximately 45. The gain and the rail-to-rail output switching are consistent with the large noise margin and minimal static power consumption of CMOS. Vertically interconnected, three-stage CMOS ring oscillators were also fabricated by using layer-1 InAs NW n-FETs and layer-2 Ge/Si NW p-FETs. Significantly, measurements of these circuits demonstrated stable, self-sustained oscillations with a maximum frequency of 108 MHz, which represents the highest-frequency integrated circuit based on chemically synthesized nanoscale materials. These results highlight the flexibility of bottom-up assembly of distinct nanoscale materials and suggest substantial promise for 3D integrated circuits.

  7. Development of an integrated control and measurement system

    International Nuclear Information System (INIS)

    Manges, W.W.

    1984-03-01

    This thesis presents a tutorial on the issues involved in the development of a minicomputer-based, distributed intelligence data acquisition and process control system to support complex experimental facilities. The particular system discussed in this thesis is under development for the Atomic Vapor Laser Isotope Separation (AVLIS) Program at the Oak Ridge Gaseous Diffusion Plant (ORGDP). In the AVLIS program, we were careful to integrate the computer sections of the implementation into the instrumentation system rather than adding them as an appendage. We then addressed the reliability and availability of the system as a separate concern. Thus, our concept of an integrated control and measurement (ICAM) system forms the basis for this thesis. This thesis details the logic and philosophy that went into the development of this system and explains why the commercially available turn-key systems generally are not suitable. Also, the issues involved in the specification of the components for such an integrated system are emphasized

  8. Video integrated measurement system. [Diagnostic display devices

    Energy Technology Data Exchange (ETDEWEB)

    Spector, B.; Eilbert, L.; Finando, S.; Fukuda, F.

    1982-06-01

    A Video Integrated Measurement (VIM) System is described which incorporates the use of various noninvasive diagnostic procedures (moire contourography, electromyography, posturometry, infrared thermography, etc.), used individually or in combination, for the evaluation of neuromusculoskeletal and other disorders and their management with biofeedback and other therapeutic procedures. The system provides for measuring individual diagnostic and therapeutic modes, or multiple modes by split screen superimposition, of real time (actual) images of the patient and idealized (ideal-normal) models on a video monitor, along with analog and digital data, graphics, color, and other transduced symbolic information. It is concluded that this system provides an innovative and efficient method by which the therapist and patient can interact in biofeedback training/learning processes and holds considerable promise for more effective measurement and treatment of a wide variety of physical and behavioral disorders.

  9. Validating the breeding value for maternal preweaning gain in beef ...

    African Journals Online (AJOL)

    The objective of this research was to validate the maternal breeding value for preweaning gain as a predictor of genetic differences in milk production. Phenotypic variation in preweaning gain and in milk production measured by the weigh-suckle-weigh method was partitioned into genetic and non-genetic components.

  10. Global Value Chain Integration and Productivity : Evidence from Enterprise Surveys in Namibia, South Africa, and Swaziland

    OpenAIRE

    Winkler, Deborah; Farole, Thomas

    2015-01-01

    In order to adequately measure a firm’s participation in GVCs in this context, it is important to first identify the different forms through which GVC integration can affect domestic firms’ productivity. Integrating a country’s domestic suppliers into GVCs increases the possibility for productivity gains through exporting to a buyer abroad or supplying to a multinational in the country. Bu...

  11. Semi-custom integrated circuit amplifier and level discriminator for nuclear and space instruments

    International Nuclear Information System (INIS)

    Hahn, S.F.; Cafferty, M.M.

    1991-01-01

    This paper reports on the development an extra fast current feedback amplifier and a level discriminator employing a dielectrically-isolated bipolar, semi-custom Application Specific Integrated Circuit (ASIC) process. These devices are specifically designed for instruments aboard spacecrafts or in portable packages requiring low power and weight. The amplifier adopts current feedback for a unity-gain bandwidth of 90 MHz while consuming 50 mW. The level discriminator uses a complementary output driver for balanced positive and negative response times. The power consumption of these devices can be programmed by external resistors for optimal speed and power trade-off

  12. Semi-custom integrated circuit amplifier and level discriminator for nuclear and space instruments

    International Nuclear Information System (INIS)

    Hahn, S.F.; Cafferty, M.M.

    1990-01-01

    This paper reports an extra fast current feedback amplifier and a level discriminator developed employing a dielectrically isolated bipolar, semi-custom Application Specific Integrated Circuit (ASIC) process. These devices are specifically designed for instruments aboard spacecrafts or in portable packages requiring low power and weight. The amplifier adopts current feedback for a unity- gain bandwidth of 90 MHz while consuming 50 mW. The level discriminator uses a complementary output driver for balanced positive and negative response times. The power consumption of these devices can be programmed by external resistors for optimal speed and power trade-off

  13. Deficiency of employability capacity

    Directory of Open Access Journals (Sweden)

    Pelse I.

    2012-10-01

    Full Text Available Young unemployed people have comprised one of the significantly largest groups of the unemployed people in Latvia in recent years. One of the reasons why young people have difficulty integrating into the labour market is the “expectation gap” that exists in the relations between employers and the new generation of workers. Employers focus on capacity-building for employability such individual factors as strength, patience, self-discipline, self-reliance, self-motivation, etc., which having a nature of habit and are developed in a long-term work socialization process, which begins even before the formal education and will continue throughout the life cycle. However, when the socialization is lost, these habits are depreciated faster than they can be restored. Currently a new generation is entering the labour market, which is missing the succession of work socialization. Factors, such as rising unemployment and poverty in the background over the past twenty years in Latvia have created a very unfavourable employability background of “personal circumstances” and “external factors”, which seriously have impaired formation of the skills and attitudes in a real work environment. The study reveals another paradox – the paradox of poverty. Common sense would want to argue that poverty can be overcome by the job. However, the real state of affairs shows that unfavourable coincidence of the individual, personal circumstances and external factors leads to deficit of employability capacity and possibility of marked social and employment deprivation.

  14. Employed men and women substance abusers: job troubles and treatment outcomes.

    Science.gov (United States)

    Slaymaker, Valerie J; Owen, Patricia L

    2006-12-01

    The majority of U.S. adults with substance abuse or dependence are gainfully employed. However, little is known about outcomes among stably employed people in treatment for substance dependence. Participants (N = 212) entering a residential treatment program completed the Addiction Severity Index (ASI) at intake and 6 and 12 months follow-up. Significant improvements were seen in absenteeism, number of employment problem days, and whether their job was in jeopardy 12 months later. Overall, 65% were retained by their original employer. ASI composite alcohol, drug, legal, family, and psychiatric scores also improved significantly. Continuous abstinence was achieved by 65% and 51% at 6 and 12 months, respectively. Although less likely to be referred to treatment by their employer, women responded to treatment as well as men, reporting similar abstinence rates and overall quality of life during the year following discharge from treatment.

  15. Integrative Scenario Development

    Directory of Open Access Journals (Sweden)

    Joerg A. Priess

    2014-03-01

    Full Text Available Scenarios are employed to address a large number of future environmental and socioeconomic challenges. We present a conceptual framework for the development of scenarios to integrate the objectives of different stakeholder groups. Based on the framework, land-use scenarios were developed to provide a common base for further research. At the same time, these scenarios assisted regional stakeholders to bring forward their concerns and arrive at a shared understanding of challenges between scientific and regional stakeholders, which allowed them to eventually support regional decision making. The focus on the integration of views and knowledge domains of different stakeholder groups, such as scientists and practitioners, required rigorous and repeated measures of quality control. The application of the integrative concept provided products for both stakeholder groups, and the process of scenario development facilitated cooperation and learning within both the scientist and practitioner groups as well as between the two groups.

  16. Integral tightness measurements at the Paks-1 nuclear reactor

    Energy Technology Data Exchange (ETDEWEB)

    Taubner, R.; Techy, Z. (Villamosenergiaipari Kutato Intezet, Budapest (Hungary))

    1983-01-01

    The containment system experiments of the Paks-1 nuclear reactor are described. The integrated tightness measurements of the hermetic system were completed in 1982. The principles and methods and the evaluation of the results of the measurements are discussed. Some features of the filtration characteristics are demonstrated using relative values and a method enabling the description of the physical contents of the characteristics by flow technical functions is outlined.

  17. Waist circumference, body mass index, and employment outcomes.

    Science.gov (United States)

    Kinge, Jonas Minet

    2017-07-01

    Body mass index (BMI) is an imperfect measure of body fat. Recent studies provide evidence in favor of replacing BMI with waist circumference (WC). Hence, I investigated whether or not the association between fat mass and employment status vary by anthropometric measures. I used 15 rounds of the Health Survey for England (1998-2013), which has measures of employment status in addition to measured height, weight, and WC. WC and BMI were entered as continuous variables and obesity as binary variables defined using both WC and BMI. I used multivariate models controlling for a set of covariates. The association of WC with employment was of greater magnitude than the association between BMI and employment. I reran the analysis using conventional instrumental variables methods. The IV models showed significant impacts of obesity on employment; however, they were not more pronounced when WC was used to measure obesity, compared to BMI. This means that, in the IV models, the impact of fat mass on employment did not depend on the measure of fat mass.

  18. A simple method to increase effective PMT gain by amplifier circuit powered from voltage divider

    International Nuclear Information System (INIS)

    Popov, V.; Majewski, S.; Wojtsekhowski, B.; Guerin, D

    2001-01-01

    A novel concept is introduced of additional effective signal amplification by employing a dedicated circuit to process anode or dynode signals prior to sending them through a standard 50 /spl Omega/ line/cable. The circuit is entirely powered by the current flowing through the base voltage divider. Additional gain factors of 2-10 were easily achieved with preserved operation speed and rate capability up to several MHz. This additional signal boost can be used in many applications where higher gain and/or lower PMT operational voltages are desirable. For example, in the case of a PMT employed in a low input light signal (such as a Cherenkov counter), this technique will permit operation at a lower voltage and, therefore, will result in better operational PMT stability and longer PMT lifetime. At present, two experimental set-ups at Jefferson Lab are using PMT bases using this concept

  19. Cross-sectional associations of active transport, employment status and objectively measured physical activity: analyses from the National Health and Nutrition Examination Survey.

    Science.gov (United States)

    Yang, Lin; Hu, Liang; Hipp, J Aaron; Imm, Kellie R; Schutte, Rudolph; Stubbs, Brendon; Colditz, Graham A; Smith, Lee

    2018-05-05

    To investigate associations between active transport, employment status and objectively measured moderate-to-vigorous physical activity (MVPA) in a representative sample of US adults. Cross-sectional analyses of data from the National Health and Nutrition Examination Survey. A total of 5180 adults (50.2 years old, 49.0% men) were classified by levels of active transportation and employment status. Outcome measure was weekly time spent in MVPA as recorded by the Actigraph accelerometer. Associations between active transport, employment status and objectively measured MVPA were examined using multivariable linear regression models adjusted for age, body mass index, race and ethnicity, education level, marital status, smoking status, working hour duration (among the employed only) and self-reported leisure time physical activity. Patterns of active transport were similar between the employed (n=2897) and unemployed (n=2283), such that 76.0% employed and 77.5% unemployed engaged in no active transport. For employed adults, those engaging in high levels of active transport (≥90 min/week) had higher amount of MVPA than those who did not engage in active transport. This translated to 40.8 (95% CI 15.7 to 65.9) additional minutes MVPA per week in men and 57.9 (95% CI 32.1 to 83.7) additional minutes MVPA per week in women. Among the unemployed adults, higher levels of active transport were associated with more MVPA among men (44.8 min/week MVPA, 95% CI 9.2 to 80.5) only. Findings from the present study support interventions to promote active transport to increase population level physical activity. Additional strategies are likely required to promote physical activity among unemployed women. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  20. Measuring weld heat to evaluate weld integrity

    Energy Technology Data Exchange (ETDEWEB)

    Schauder, V., E-mail: schauder@hks-prozesstechnik.de [HKS-Prozesstechnik GmbH, Halle (Germany)

    2015-11-15

    Eddy current and ultrasonic testing are suitable for tube and pipe mills and have been used for weld seam flaw detection for decades, but a new process, thermography, is an alternative. By measuring the heat signature of the weld seam as it cools, it provides information about weld integrity at and below the surface. The thermal processes used to join metals, such as plasma, induction, laser, and gas tungsten arc welding (GTAW), have improved since they were developed, and they get better with each passing year. However, no industrial process is perfect, so companies that conduct research in flaw detection likewise continue to develop and improve the technologies used to verify weld integrity: ultrasonic testing (UT), eddy current testing (ET), hydrostatic, X-ray, magnetic particle, and liquid penetrant are among the most common. Two of these are used for verifying the integrity of the continuous welds such as those used on pipe and tube mills: UT and ET. Each uses a transmitter to send waves of ultrasonic energy or electrical current through the material and a receiver (probe) to detect disturbances in the flow. The two processes often are combined to capitalize on the strengths of each. While ET is good at detecting flaws at or near the surface, UT penetrates the material, detecting subsurface flaws. One drawback is that sound waves and electrical current waves have a specific direction of travel, or an alignment. A linear defect that runs parallel to the direction of travel of the ultrasonic sound wave or a flaw that is parallel to the coil winding direction of the ET probe can go undetected. A second drawback is that they don't detect cold welds. An alternative process, thermography, works in a different fashion: It monitors the heat of the material as the weld cools. Although it measures the heat at the surface, the heat signature provides clues about cooling activity deep in the material, resulting in a thorough assessment of the weld's integrity It

  1. New approach to the adjustment of group cross sections fitting integral measurements - 2

    International Nuclear Information System (INIS)

    Chao, Y.A.

    1980-01-01

    The method developed in the first paper concerning group cross sections fitting integral measurements is generalized to cover the case when the source of the extracted negligence discrepancy cannot be identified and the theoretical relation between the integral and differential measurements is also subject to uncertainty. The question of how to divide in such a case the negligence discrepancy between the integral and differential data is resolved. Application to a specific problem with real experimental data is shown as a demonstration of the method. 4 refs

  2. Multisensory Integration in Cochlear Implant Recipients.

    Science.gov (United States)

    Stevenson, Ryan A; Sheffield, Sterling W; Butera, Iliza M; Gifford, René H; Wallace, Mark T

    Speech perception is inherently a multisensory process involving integration of auditory and visual cues. Multisensory integration in cochlear implant (CI) recipients is a unique circumstance in that the integration occurs after auditory deprivation and the provision of hearing via the CI. Despite the clear importance of multisensory cues for perception, in general, and for speech intelligibility, specifically, the topic of multisensory perceptual benefits in CI users has only recently begun to emerge as an area of inquiry. We review the research that has been conducted on multisensory integration in CI users to date and suggest a number of areas needing further research. The overall pattern of results indicates that many CI recipients show at least some perceptual gain that can be attributable to multisensory integration. The extent of this gain, however, varies based on a number of factors, including age of implantation and specific task being assessed (e.g., stimulus detection, phoneme perception, word recognition). Although both children and adults with CIs obtain audiovisual benefits for phoneme, word, and sentence stimuli, neither group shows demonstrable gain for suprasegmental feature perception. Additionally, only early-implanted children and the highest performing adults obtain audiovisual integration benefits similar to individuals with normal hearing. Increasing age of implantation in children is associated with poorer gains resultant from audiovisual integration, suggesting a sensitive period in development for the brain networks that subserve these integrative functions, as well as length of auditory experience. This finding highlights the need for early detection of and intervention for hearing loss, not only in terms of auditory perception, but also in terms of the behavioral and perceptual benefits of audiovisual processing. Importantly, patterns of auditory, visual, and audiovisual responses suggest that underlying integrative processes may be

  3. Optical gain and gain suppression of quantum-well lasers with valence band mixing

    International Nuclear Information System (INIS)

    Ahn, D.; Chuang, S.L.

    1990-01-01

    The effects of valence band mixing on the nonlinear gains of quantum-well lasers are studied theoretically. The authors' analysis is based on the multiband effective-mass theory and the density matrix formalism with intraband relaxation taken into account. The gain and the gain-suppression coefficient of a quantum-well laser are calculated from the complex optical susceptibility obtained by the density matrix formulation with the theoretical dipole moments obtained from the multiband effective-mass theory. The calculated gain spectrum shows that there are remarkable differences (both in peak amplitude and spectral shape) between our model with valence band mixing and the conventional parabolic band model. The shape of the gain spectrum calculated by the authors' model becomes more symmetric due to intraband relaxation together with nonparabolic energy dispersions and is closer to the experimental observations when compared with the conventional method using the parabolic band model and the multiband effective-mass calculation without intraband relaxation. Both give quite asymmetric gain spectra. Optical intensity in the GaAs active region is estimated by solving rate equations for the stationary states with nonlinear gain suppression. The authors calculate the mode gain for the resonant mode including the gain suppression, which results in spectral hole burning of the gain spectrum

  4. Indicators and measurement tools for health system integration : a knowledge synthesis protocol

    OpenAIRE

    Oelke, Nelly Donszelmann; Suter, Esther; Lima, Maria Alice Dias da Silva; Vliet-Brown, Cheryl Van

    2015-01-01

    Background: Health system integration is a key component of health system reform with the goal of improving outcomes for patients, providers, and the health system. Although health systems continue to strive for better integration, current delivery of health services continues to be fragmented. A key gap in the literature is the lack of information on what successful integration looks like and how to measure achievement towards an integrated system. This multi-site study protocol builds on a ...

  5. How European unification has shaped the debate on measuring international financial integration

    OpenAIRE

    Pieterse-Bloem, Mary; Eijffinger, Sylvester

    2013-01-01

    textabstractIn this paper we analyse a chronicle of economic theory on international financial integration post-WWII to the present date. Our focus is on theories that have somehow quantify the state and speed of international financial integration. We are able to contrast and compare three distinct strands that have brought forward conditions for its measurement. It is shown that European unification provides much of the empirical testing ground for these measures of international financial ...

  6. Device for the integral measurement of ionizing radiations

    International Nuclear Information System (INIS)

    Micheron, Francois.

    1980-01-01

    This invention relates to devices for the integral determination of ionizing radiations, particularly to the construction of a portable dosemeter. Portable measuring instruments have been suggested in the past, particularly dosemeters in which the discharge of a capacitor under the action of ionizing radiations is measured. Since the charge of a capacitor is not stable owing to dielectric imperfections, these measuring instruments have to be recalibrated at frequent intervals. To overcome this drawback, the invention suggests using the discharge of an electret, electrically charged to a pre-set initial value, under the action of ionizing radiations, as the transducer means of a dosemeter used in conjunction with display or warning systems [fr

  7. Diversity-integration dispositif and the immigration state

    DEFF Research Database (Denmark)

    Fogelman, Tatiana

    Over the past decade or two European landscapes of governance of immigrant populations have undergone significant transformations. In the first place, state integrationist agendas have gained a remarkable prominence. This is evident through the ever-increasing consolidation of integration...... as the frame through which the subject of immigration is understood, as well as the proliferation of myriads of integration-invoking legal and institutional measures. At the same time, many of these cultural political contexts have experienced a diversity turn. Public and private institutions alike have been...... disagree with. Yet critical scholarship has tended to treat these two transformations separately. In this paper, I trace the intertwinement of diversity and integration as joint imperatives of contemporary immigrant governance. And more specifically, drawing on Foucault, I suggest that the two are best...

  8. Correlates between kinematics and baropodometric measurements for an integrated in-vivo assessment of the segmental foot function in gait.

    Science.gov (United States)

    Giacomozzi, Claudia; Leardini, Alberto; Caravaggi, Paolo

    2014-08-22

    Baropodometry and multi-segmental foot kinematics are frequently employed to obtain insight into the mechanics of the foot-ground interaction in both basic research and clinical settings. However, nothing hitherto has been reported on the full integration of kinematics with baropodometric parameters, and only a few studies have addressed the association between intersegmental kinematics and plantar loading within specific foot regions. The aim of this study was to understanding the relationships between foot joint mobility and plantar loading by focusing on the correlation between these two measures. An integrated pressure-force-kinematics system was used to measure plantar pressure and rotations between foot segments during the stance phase of walking in 10 healthy subjects. An anatomically-based mask was applied to each footprint to obtain six regions according to the position of the markers; hence each kinematic segment was paired with a corresponding area of the plantar surface. Relationships between segmental motion and relevant baropodometric data were explored by means of correlation analysis. Negative, weak-to-moderate correlations (R(2)plantar pressure in almost all regions. The study helps improve our understanding of the relationship between joint mobility and plantar loading in the healthy foot and represents a critical preliminary analysis before addressing possible clinical applications. Copyright © 2014 Elsevier Ltd. All rights reserved.

  9. Improving integrity of on-line grammage measurement with traceable basic calibration.

    Science.gov (United States)

    Kangasrääsiö, Juha

    2010-07-01

    The automatic control of grammage (basis weight) in paper and board production is based upon on-line grammage measurement. Furthermore, the automatic control of other quality variables such as moisture, ash content and coat weight, may rely on the grammage measurement. The integrity of Kr-85 based on-line grammage measurement systems was studied, by performing basic calibrations with traceably calibrated plastic reference standards. The calibrations were performed according to the EN ISO/IEC 17025 standard, which is a requirement for calibration laboratories. The observed relative measurement errors were 3.3% in the first time calibrations at the 95% confidence level. With the traceable basic calibration method, however, these errors can be reduced to under 0.5%, thus improving the integrity of on-line grammage measurements. Also a standardised algorithm, based on the experience from the performed calibrations, is proposed to ease the adjustment of the different grammage measurement systems. The calibration technique can basically be applied to all beta-radiation based grammage measurements. 2010 ISA. Published by Elsevier Ltd. All rights reserved.

  10. Pressure Gain Combustion for Gas Turbines

    Science.gov (United States)

    2013-08-20

    downstream of a large  diesel  engine, they tested three turbine geometries the best experienced  a drop in efficiency of 10%.   A few people have  looked...Society of Mechanical Engineers Turbo Expo 1995 [3] Heffer, J., 2010, Integration of Pressure Gain Combustion with Gas Turbines, Ph.D. Thesis...investigated  an  axial  turbocharger  designed  for  use  downstream  of  a  large  diesel   engine,  they  tested  three  turbine geometries the best

  11. Thermal measurement a requirement for monolithic microwave integrated circuit design

    OpenAIRE

    Hopper, Richard; Oxley, C. H.

    2008-01-01

    The thermal management of structures such as Monolithic Microwave Integrated Circuits (MMICs) is important, given increased circuit packing densities and RF output powers. The paper will describe the IR measurement technology necessary to obtain accurate temperature profiles on the surface of semiconductor devices. The measurement procedure will be explained, including the device mounting arrangement and emissivity correction technique. The paper will show how the measurement technique has be...

  12. Efficiency Gain For Bi-Facial Multi-Crystalline Solar Cell With Uncapped Al2O3 And Local Firing-Through Al-BSF

    Energy Technology Data Exchange (ETDEWEB)

    Cesar, I.; Manshanden, P.; Janssen, G.; Weeber, A.W. [ECN Solar Energy, P.O. Box 1, 1755 ZG Petten (Netherlands); Granneman, E.; Siarheyeva, O. [Levitech BV, Versterkerstraat 10, 1322 AP Almere (Netherlands)

    2013-06-15

    The p-type bi-facial cell concept, p-PASHA (Passivated on all sides H- pattern), is developed at ECN and employs an uncapped AlOx passivation layer on the rear through which a screen printed H-pattern of aluminium contacts is fired. Here we report a net gain in cell efficiency of 0.2% absolute for the p-PASHA cell vs. industrial reference with the addition of a clean and an ALD step. Even higher gains up to 0.5% abs. are expected after optimization of the cell design and process. Apart from the efficiency gain, the bi-facial cell concept allows for 50-80% reduction in Al paste consumption, the use of thinner wafers, and consists of less processing steps compared to prevalent PERC concepts. The Al2O3 dielectric layer is deposited in the Levitrack, an industrial-type system for high-throughput Atomic Layer Deposition (ALD) developed by Levitech. The efficiency gain is obtained on multi-crystalline wafers, at a rear metal fraction of 40%. Localized IQE mapping, cross-sectional SEM investigation, resistance measurements and 2D simulation relate the efficiency improvement compared to our conventional process to better eutectic and BSF formation at the Al contact edges.

  13. Integration of a silicon-based microprobe into a gear measuring instrument for accurate measurement of micro gears

    International Nuclear Information System (INIS)

    Ferreira, N; Krah, T; Jeong, D C; Kniel, K; Härtig, F; Metz, D; Dietzel, A; Büttgenbach, S

    2014-01-01

    The integration of silicon micro probing systems into conventional gear measuring instruments (GMIs) allows fully automated measurements of external involute micro spur gears of normal modules smaller than 1 mm. This system, based on a silicon microprobe, has been developed and manufactured at the Institute for Microtechnology of the Technische Universität Braunschweig. The microprobe consists of a silicon sensor element and a stylus which is oriented perpendicularly to the sensor. The sensor is fabricated by means of silicon bulk micromachining. Its small dimensions of 6.5 mm × 6.5 mm allow compact mounting in a cartridge to facilitate the integration into a GMI. In this way, tactile measurements of 3D microstructures can be realized. To enable three-dimensional measurements with marginal forces, four Wheatstone bridges are built with diffused piezoresistors on the membrane of the sensor. On the reverse of the membrane, the stylus is glued perpendicularly to the sensor on a boss to transmit the probing forces to the sensor element during measurements. Sphere diameters smaller than 300 µm and shaft lengths of 5 mm as well as measurement forces from 10 µN enable the measurements of 3D microstructures. Such micro probing systems can be integrated into universal coordinate measuring machines and also into GMIs to extend their field of application. Practical measurements were carried out at the Physikalisch-Technische Bundesanstalt by qualifying the microprobes on a calibrated reference sphere to determine their sensitivity and their physical dimensions in volume. Following that, profile and helix measurements were carried out on a gear measurement standard with a module of 1 mm. The comparison of the measurements shows good agreement between the measurement values and the calibrated values. This result is a promising basis for the realization of smaller probe diameters for the tactile measurement of micro gears with smaller modules. (paper)

  14. Canonical path integral measures for Holst and Plebanski gravity: I. Reduced phase space derivation

    International Nuclear Information System (INIS)

    Engle, Jonathan; Han Muxin; Thiemann, Thomas

    2010-01-01

    An important aspect in defining a path integral quantum theory is the determination of the correct measure. For interacting theories and theories with constraints, this is non-trivial, and is normally not the heuristic 'Lebesgue measure' usually used. There have been many determinations of a measure for gravity in the literature, but none for the Palatini or Holst formulations of gravity. Furthermore, the relations between different resulting measures for different formulations of gravity are usually not discussed. In this paper we use the reduced phase technique in order to derive the path-integral measure for the Palatini and Holst formulation of gravity, which is different from the Lebesgue measure up to local measure factors which depend on the spacetime volume element and spatial volume element. From this path integral for the Holst formulation of general relativity we can also give a new derivation of the Plebanski path integral and discover a discrepancy with the result due to Buffenoir, Henneaux, Noui and Roche whose origin we resolve. This paper is the first in a series that aims at better understanding the relation between canonical loop quantum gravity and the spin-foam approach.

  15. Maternal Employment and Children's Academic Achievement: Parenting Styles as Mediating Variable.

    Science.gov (United States)

    Beyer, Sylvia

    1995-01-01

    Provides a review and integration of findings on the effects of parenting styles and maternal employment on children's academic achievement. Presents a model in which it is argued that maternal employment status has little, if any, direct effect on children's academic achievement. Suggests maternal employment affects parenting styles, which in…

  16. Phase and gain control policies for robust active vibration control of flexible structures

    International Nuclear Information System (INIS)

    Zhang, K; Ichchou, M N; Scorletti, G; Mieyeville, F

    2013-01-01

    The interest of this paper is to develop a general and systematic robust control methodology for active vibration control of flexible structures. For this purpose, first phase and gain control policies are proposed to impose qualitative frequency-dependent requirements on the controller to consider a complete set of control objectives. Then the proposed control methodology is developed by employing phase and gain control policies in the dynamic output feedback H ∞  control: according to the set of control objectives, phase and gain control policies incorporate necessary weighting functions and determine them in a rational and systematic way; on the other hand, with the appropriate weighting functions efficient H ∞  control algorithms can automatically realize phase and gain control policies and generate a satisfactory H ∞  controller. The proposed control methodology can be used for both SISO and MIMO systems with collocated or non-collocated sensors and actuators. In this paper, it is validated on a non-collocated piezoelectric cantilever beam. Both numerical simulations and experimental results demonstrate the effectiveness of the proposed control methodology. (paper)

  17. Minimizing differential modal gain in cladding-pumped EDFAs supporting four and six mode groups.

    Science.gov (United States)

    Kang, Qiongyue; Lim, Ee-Leong; Jung, Francesco Poletti Yongmin; Baskiotis, Catherine; Alam, Shaif-Ul; Richardson, David J

    2014-09-08

    We employ a Genetic Algorithm for the purpose of minimization of the maximum differential modal gain (DMG) over all the supported signal modes (at the same wavelength) of cladding-pumped four-mode and six-mode-group EDFAs. The optimal EDFA designs found through the algorithm provide less than 1 dB DMG across the C-band (1530-1565 nm) whilst achieving more than 20 dB gain per mode. We then analyze the sensitivity of the DMG to small variations from the optimal value of the erbium doping concentration and the structural parameters, and estimate the fabrication tolerance for reliable amplifier performance.

  18. What happens to the employment of disabled individuals when all financial disincentives to work are abolished?

    Science.gov (United States)

    Vall Castelló, Judit

    2017-09-01

    Policymakers and organizations representing people with disabilities have highlighted the importance of promoting the employment prospects of disabled individuals as a determinant to ensure their broader integration into the society. Policy reforms that attempt to incentivise disabled individuals to work typically involve reduced financial punishments for earning above a predetermined threshold (substantial gainful activity). This paper exploits a Spanish reform that entirely eliminated any disincentives for disabled individuals to work. Partially disabled individuals in Spain are subject to income taxation in all regions except in the province of Bizkaia. Before 2007, partially disabled individuals in Bizkaia were exempt from income taxation if they did not work. In December 2006, a new law was passed in Bizkaia that distinguished between individuals aged 55 or younger, who were no longer tax-exempt, and those who were older than 55 years, who continued to be tax-exempt if they did not work. I exploit this change in the legislation and employ both a difference-in-difference strategy comparing the employment outcomes of disabled young men across provinces and time as well as a triple difference model with disabled men older than 55 years, who are unaffected by the policy. My results show that the reform increased the probability of working by 6.5 percentage points for disabled men aged 55 or younger. Copyright © 2017 John Wiley & Sons, Ltd.

  19. Application specific integrated circuit for high temperature oil well applications

    Energy Technology Data Exchange (ETDEWEB)

    Fallet, T.; Gakkestad, J.; Forre, G.

    1994-12-31

    This paper describes the design of an integrated BiCMOS circuit for high temperature applications. The circuit contains Pierce oscillators with automatic gain control, and measurements show that it is operating up to 266{sup o}C. The relative frequency variation up to 200 {sup o}C is less than 60 ppm caused mainly by the crystal element itself. 4 refs., 7 figs.

  20. A Longitudinal Investigation of Work-Family Strains and Gains, Work Commitment, and Subsequent Employment Status among Partnered Working Mothers

    Science.gov (United States)

    Mulvaney, Matthew K.; McNall, Laurel A.; Morrissey, Rebecca A.

    2011-01-01

    The purpose of this study was to examine the influence of the work-family interface on mothers' commitment to work and the implications of that work commitment for subsequent employment. The study included a sample of employed partnered mothers who participated in the National Institute of Child Health and Human Development Study of Early Child…