Asynchronous variational integration using continuous assumed gradient elements.

Science.gov (United States)

Wolff, Sebastian; Bucher, Christian

2013-03-01

Asynchronous variational integration (AVI) is a tool which improves the numerical efficiency of explicit time stepping schemes when applied to finite element meshes with local spatial refinement. This is achieved by associating an individual time step length to each spatial domain. Furthermore, long-term stability is ensured by its variational structure. This article presents AVI in the context of finite elements based on a weakened weak form (W2) Liu (2009) [1], exemplified by continuous assumed gradient elements Wolff and Bucher (2011) [2]. The article presents the main ideas of the modified AVI, gives implementation notes and a recipe for estimating the critical time step.

SXT/R391 Integrative and Conjugative Elements (ICEs) Encode a Novel 'Trap-Door' Strategy for Mobile Element Escape.

Science.gov (United States)

Ryan, Michael P; Armshaw, Patricia; Pembroke, J Tony

2016-01-01

Integrative conjugative elements (ICEs) are a class of bacterial mobile elements that have the ability to mediate their own integration, excision, and transfer from one host genome to another by a mechanism of site-specific recombination, self-circularisation, and conjugative transfer. Members of the SXT/R391 ICE family of enterobacterial mobile genetic elements display an unusual UV-inducible sensitization function which results in stress induced killing of bacterial cells harboring the ICE. This sensitization has been shown to be associated with a stress induced overexpression of a mobile element encoded conjugative transfer gene, orf43, a traV homolog. This results in cell lysis and release of a circular form of the ICE. Induction of this novel system may allow transfer of an ICE, enhancing its survival potential under conditions not conducive to conjugative transfer.

Numerical Integration Techniques for Curved-Element Discretizations of Molecule–Solvent Interfaces

Science.gov (United States)

Bardhan, Jaydeep P.; Altman, Michael D.; Willis, David J.; Lippow, Shaun M.; Tidor, Bruce; White, Jacob K.

2012-01-01

Surface formulations of biophysical modeling problems offer attractive theoretical and computational properties. Numerical simulations based on these formulations usually begin with discretization of the surface under consideration; often, the surface is curved, possessing complicated structure and possibly singularities. Numerical simulations commonly are based on approximate, rather than exact, discretizations of these surfaces. To assess the strength of the dependence of simulation accuracy on the fidelity of surface representation, we have developed methods to model several important surface formulations using exact surface discretizations. Following and refining Zauhar’s work (J. Comp.-Aid. Mol. Des. 9:149-159, 1995), we define two classes of curved elements that can exactly discretize the van der Waals, solvent-accessible, and solvent-excluded (molecular) surfaces. We then present numerical integration techniques that can accurately evaluate nonsingular and singular integrals over these curved surfaces. After validating the exactness of the surface discretizations and demonstrating the correctness of the presented integration methods, we present a set of calculations that compare the accuracy of approximate, planar-triangle-based discretizations and exact, curved-element-based simulations of surface-generalized-Born (sGB), surface-continuum van der Waals (scvdW), and boundary-element method (BEM) electrostatics problems. Results demonstrate that continuum electrostatic calculations with BEM using curved elements, piecewise-constant basis functions, and centroid collocation are nearly ten times more accurate than planartriangle BEM for basis sets of comparable size. The sGB and scvdW calculations give exceptional accuracy even for the coarsest obtainable discretized surfaces. The extra accuracy is attributed to the exact representation of the solute–solvent interface; in contrast, commonly used planar-triangle discretizations can only offer improved

An integrated finite-element approach to mechanics, transport and biosynthesis in tissue engineering

NARCIS (Netherlands)

Sengers, B.G.; Oomens, C.W.J.; Baaijens, F.P.T.

2004-01-01

A finite-element approach was formulated, aimed at enabling an integrated study of mechanical and biochemical factors that control the functional development of tissue engineered constructs. A nonlinear biphasic displacement-velocity-pressure description was combined with adjective and diffusive

A boundary integral equation for boundary element applications in multigroup neutron diffusion theory

International Nuclear Information System (INIS)

Ozgener, B.

1998-01-01

A boundary integral equation (BIE) is developed for the application of the boundary element method to the multigroup neutron diffusion equations. The developed BIE contains no explicit scattering term; the scattering effects are taken into account by redefining the unknowns. Boundary elements of the linear and constant variety are utilised for validation of the developed boundary integral formulation

Thermal performance of capillary micro tubes integrated into the sandwich element made of concrete

DEFF Research Database (Denmark)

Mikeska, Tomas; Svendsen, Svend

2013-01-01

integrated into the thin plate of sandwich element made of HPC can supply the energy needed for heating and cooling. The investigations were conceived as a low temperature concept, where the difference between the temperature of circulating fluid and air in the room was kept in range of 1 to 4°C. © (2013......The thermal performance of radiant heating and cooling systems (RHCS) composed of capillary micro tubes (CMT) integrated into the inner plate of sandwich elements made of High Performance Concrete (HPC) was investigated in the article. Temperature distribution in HPC elements around integrated CMT...

Effects of planar element formulation and numerical integration order on checkerboard material layouts

CSIR Research Space (South Africa)

Long, CS

2009-01-01

Full Text Available The effects of selected planar finite element formulations, and their associated integration schemes, on the stiffness of a checkerboard material layout are investigated. Standard 4-node bilinear elements, 8- and 9-node quadratic elements, as well...

The Analysis on the Integration and Embodiment of Traditional Cultural Element in Environmental Artistic Design

Science.gov (United States)

Ling, Bao

2018-03-01

For this phase of environmental artistic design, the traditional culture element is one very precious design element, but it has difficulty in breaking out of its shell, and that looks too outdated, however, the traditional culture element would be more peculiar if ponderously adding some elements. This paper will further analyse the integration and manifestation of traditional culture element which from the environmental artistic design, it aims to integrate the tradition and modernity perfectly and give the spectators a refreshing and unconventional sense of design.

Integrated Process Design and Control of Multi-element Reactive Distillation Processes

DEFF Research Database (Denmark)

Mansouri, Seyed Soheil; Sales-Cruz, Mauricio; Huusom, Jakob Kjøbsted

2016-01-01

In this work, integrated process design and control of reactive distillation processes involving multi-elements is presented. The reactive distillation column is designed using methods and tools which are similar in concept to non-reactive distillation design methods, such as driving force approach....... The methods employed in this work are based on equivalent element concept. This concept facilitates the representation of a multi-element reactive system as equivalent binary light and heavy key elements. First, the reactive distillation column is designed at the maximum driving force where through steady...

Reduced and selective integration techniques in the finite element analysis of plates

International Nuclear Information System (INIS)

Hughes, T.J.R.; Cohen, M.; Haroun, M.

1978-01-01

Efforts to develop effective plate bending finite elements by reduced integration techniques are described. The basis for the development is a 'thick' plate theory in which transverse shear strains are accounted for. The variables in the theory are all kinematic, namely, displacements and independent rotations. As only C 0 continuity is required, isoparametric elements may be employed, which result in several advantages over thin plate elements. It is shown that the avoidance of shear 'locking' may be facilitated by reduced integration techniques. Both uniform and selective schemes are considered. Conditions under which selective schemes are invariant are identified, and they are found to have an advantage over uniform schemes in the present situation. It is pointed out that the present elements are not subject to the difficulties encountered by thin plate theory elements, concerning boundary conditions. For example, the polygonal approximation of curved, simply supported edges is convergent. Other topics discussed are the equivalence with mixed methods, rank deficiency, convergence criteria and useful mass 'lumping' schemes for dynamics. Numerical results for several thin plate problems indicate the high degree of accuracy attainable by the present elements. (Auth.)

Integral excitation functions for proton and alpha induced reactions on target elements 22 <= Z <= 28

International Nuclear Information System (INIS)

Brinkmann, G.

1979-01-01

In the framework of a systematic study which is also important for certain cosmological questions a series of integral excitation functions of p- and α-induced nuclear reactions on target elements 22 [de

Integration Of The Security Sub-Modules Elements In The Automotive Industry

International Nuclear Information System (INIS)

Gallego, C.; Fernandez, M.; Caires, A. S.; Canibano, E.

2007-01-01

This study is addressed to obtain a design methodology for integrated security sub-modules (constituting the suspension and steering modules) in the car manufacturing industry. The sub-modules are made up of a steel structure and anchorage elements (rubber-metal or plastic-metal), which undergo separate surface treatments to prevent corrosion. Afterwards, the elements are traditionally joined by means of adhesives and screws. This process involves a great number of stages, low quality union methods and generation of corrosion areas that shorten its useful life.This methodology provides automotive suppliers an additional added value and cost reduction, allowing them to increase its competitiveness in a sector that faces the transition from the traditional supply chain to a strategic value chain

Integral finite element analysis of turntable bearing with flexible rings

Science.gov (United States)

Deng, Biao; Liu, Yunfei; Guo, Yuan; Tang, Shengjin; Su, Wenbin; Lei, Zhufeng; Wang, Pengcheng

2018-03-01

This paper suggests a method to calculate the internal load distribution and contact stress of the thrust angular contact ball turntable bearing by FEA. The influence of the stiffness of the bearing structure and the plastic deformation of contact area on the internal load distribution and contact stress of the bearing is considered. In this method, the load-deformation relationship of the rolling elements is determined by the finite element contact analysis of a single rolling element and the raceway. Based on this, the nonlinear contact between the rolling elements and the inner and outer ring raceways is same as a nonlinear compression spring and bearing integral finite element analysis model including support structure was established. The effects of structural deformation and plastic deformation on the built-in stress distribution of slewing bearing are investigated on basis of comparing the consequences of load distribution, inner and outer ring stress, contact stress and other finite element analysis results with the traditional bearing theory, which has guiding function for improving the design of slewing bearing.

Integration of element technology and system supporting thermonuclear fusion

International Nuclear Information System (INIS)

2003-01-01

A special committee for integrated system technology survey on thermonuclear fusion (TNF) was begun on June, 1999, under an aim to generally summarize whole of shapes on technology to realize TNF reactor to summarize present state of every technologies and their positioning in whole of their TNF technology. On a base of survey of these recent informations, this report is comprehensively summarized for an integrated system technology on TNF. It has outlines on magnetic field enclosing method, outlines on inertia enclosing method, element technology supporting TNF, new power generation techniques, and ripple effects on TNF technology. (G.K.)

Design Process for Integrated Concepts with Responsive Building Elements

DEFF Research Database (Denmark)

Aa, Van der A.; Heiselberg, Per

2008-01-01

An integrated building concept is a prerequisite to come to an energy efficient building with a good and healthy IAQ indoor comfort. A design process that defines the targets and boundary conditions in the very first stage of the design and guarantees them until the building is finished and used...... is needed. The hard question is however: how to make the right choice of the combination of individual measures from building components and building services elements. Within the framework of IEA-ECBCS Annex 44 research has been conducted about the design process for integrated building concepts...

Selective pressures to maintain attachment site specificity of integrative and conjugative elements.

Directory of Open Access Journals (Sweden)

Kayla L Menard

Full Text Available Integrative and conjugative elements (ICEs are widespread mobile genetic elements that are usually found integrated in bacterial chromosomes. They are important agents of evolution and contribute to the acquisition of new traits, including antibiotic resistances. ICEs can excise from the chromosome and transfer to recipients by conjugation. Many ICEs are site-specific in that they integrate preferentially into a primary attachment site in the bacterial genome. Site-specific ICEs can also integrate into secondary locations, particularly if the primary site is absent. However, little is known about the consequences of integration of ICEs into alternative attachment sites or what drives the apparent maintenance and prevalence of the many ICEs that use a single attachment site. Using ICEBs1, a site-specific ICE from Bacillus subtilis that integrates into a tRNA gene, we found that integration into secondary sites was detrimental to both ICEBs1 and the host cell. Excision of ICEBs1 from secondary sites was impaired either partially or completely, limiting the spread of ICEBs1. Furthermore, induction of ICEBs1 gene expression caused a substantial drop in proliferation and cell viability within three hours. This drop was dependent on rolling circle replication of ICEBs1 that was unable to excise from the chromosome. Together, these detrimental effects provide selective pressure against the survival and dissemination of ICEs that have integrated into alternative sites and may explain the maintenance of site-specific integration for many ICEs.

49 CFR 192.911 - What are the elements of an integrity management program?

Science.gov (United States)

2010-10-01

...) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) PIPELINE SAFETY TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Gas Transmission Pipeline Integrity Management § 192.911 What are the elements of an integrity management program...

Automated element identification for EDS spectra evaluation using quantification and integrated spectra simulation approaches

International Nuclear Information System (INIS)

Eggert, F

2010-01-01

This work describes first real automated solution for qualitative evaluation of EDS spectra in X-ray microanalysis. It uses a combination of integrated standardless quantitative evaluation, computation of analytical errors to a final uncertainty, and parts of recently developed simulation approaches. Multiple spectra reconstruction assessments and peak searches of the residual spectrum are powerful enough to solve the qualitative analytical question automatically for totally unknown specimens. The integrated quantitative assessment is useful to improve the confidence of the qualitative analysis. Therefore, the qualitative element analysis becomes a part of integrated quantitative spectrum evaluation, where the quantitative results are used to iteratively refine element decisions, spectrum deconvolution, and simulation steps.

Analysis of Elastic-Plastic J Integrals for 3-Dimensional Cracks Using Finite Element Alternating Method

International Nuclear Information System (INIS)

Park, Jai Hak

2009-01-01

SGBEM(Symmetric Galerkin Boundary Element Method)-FEM alternating method has been proposed by Nikishkov, Park and Atluri. In the proposed method, arbitrarily shaped three-dimensional crack problems can be solved by alternating between the crack solution in an infinite body and the finite element solution without a crack. In the previous study, the SGBEM-FEM alternating method was extended further in order to solve elastic-plastic crack problems and to obtain elastic-plastic stress fields. For the elastic-plastic analysis the algorithm developed by Nikishkov et al. is used after modification. In the algorithm, the initial stress method is used to obtain elastic-plastic stress and strain fields. In this paper, elastic-plastic J integrals for three-dimensional cracks are obtained using the method. For that purpose, accurate values of displacement gradients and stresses are necessary on an integration path. In order to improve the accuracy of stress near crack surfaces, coordinate transformation and partitioning of integration domain are used. The coordinate transformation produces a transformation Jacobian, which cancels the singularity of the integrand. Using the developed program, simple three-dimensional crack problems are solved and elastic and elastic-plastic J integrals are obtained. The obtained J integrals are compared with the values obtained using a handbook solution. It is noted that J integrals obtained from the alternating method are close to the values from the handbook

Elements for successful sensor-based process control {Integrated Metrology}

International Nuclear Information System (INIS)

Butler, Stephanie Watts

1998-01-01

Current productivity needs have stimulated development of alternative metrology, control, and equipment maintenance methods. Specifically, sensor applications provide the opportunity to increase productivity, tighten control, reduce scrap, and improve maintenance schedules and procedures. Past experience indicates a complete integrated solution must be provided for sensor-based control to be used successfully in production. In this paper, Integrated Metrology is proposed as the term for an integrated solution that will result in a successful application of sensors for process control. This paper defines and explores the perceived four elements of successful sensor applications: business needs, integration, components, and form. Based upon analysis of existing successful commercially available controllers, the necessary business factors have been determined to be strong, measurable industry-wide business needs whose solution is profitable and feasible. This paper examines why the key aspect of integration is the decision making process. A detailed discussion is provided of the components of most importance to sensor based control: decision-making methods, the 3R's of sensors, and connectivity. A metric for one of the R's (resolution) is proposed to allow focus on this important aspect of measurement. A form for these integrated components which synergistically partitions various aspects of control at the equipment and MES levels to efficiently achieve desired benefits is recommended

Elements for successful sensor-based process control {Integrated Metrology}

Science.gov (United States)

Butler, Stephanie Watts

1998-11-01

Current productivity needs have stimulated development of alternative metrology, control, and equipment maintenance methods. Specifically, sensor applications provide the opportunity to increase productivity, tighten control, reduce scrap, and improve maintenance schedules and procedures. Past experience indicates a complete integrated solution must be provided for sensor-based control to be used successfully in production. In this paper, Integrated Metrology is proposed as the term for an integrated solution that will result in a successful application of sensors for process control. This paper defines and explores the perceived four elements of successful sensor applications: business needs, integration, components, and form. Based upon analysis of existing successful commercially available controllers, the necessary business factors have been determined to be strong, measurable industry-wide business needs whose solution is profitable and feasible. This paper examines why the key aspect of integration is the decision making process. A detailed discussion is provided of the components of most importance to sensor based control: decision-making methods, the 3R's of sensors, and connectivity. A metric for one of the R's (resolution) is proposed to allow focus on this important aspect of measurement. A form for these integrated components which synergistically partitions various aspects of control at the equipment and MES levels to efficiently achieve desired benefits is recommended.

Portable waveguide display system with a large field of view by integrating freeform elements and volume holograms.

Science.gov (United States)

Han, Jian; Liu, Juan; Yao, Xincheng; Wang, Yongtian

2015-02-09

A compact waveguide display system integrating freeform elements and volume holograms is presented here for the first time. The use of freeform elements can broaden the field of view, which limits the applications of a holographic waveguide. An optimized system can achieve a diagonal field of view of 45° when the thickness of the waveguide planar is 3mm. Freeform-elements in-coupler and the volume holograms out-coupler were designed in detail in our study, and the influence of grating configurations on diffraction efficiency was analyzed thoroughly. The off-axis aberrations were well compensated by the in-coupler and the diffraction efficiency of the optimized waveguide display system could reach 87.57%. With integrated design, stability and reliability of this monochromatic display system were achieved and the alignment of the system was easily controlled by the record of the volume holograms, which makes mass production possible.

Development of efficient finite elements for structural integrity analysis of solid rocket motor propellant grains

International Nuclear Information System (INIS)

Marimuthu, R.; Nageswara Rao, B.

2013-01-01

Solid propellant rocket motors (SRM) are regularly used in the satellite launch vehicles which consist of mainly three different structural materials viz., solid propellant, liner, and casing materials. It is essential to assess the structural integrity of solid propellant grains under the specified gravity, thermal and pressure loading conditions. For this purpose finite elements developed following the Herrmann formulation are: twenty node brick element (BH20), eight node quadrilateral plane strain element (PH8) and, eight node axi-symmetric solid of revolution element (AH8). The time-dependent nature of the solid propellant grains is taken into account utilizing the direct inverse method of Schepary to specify the effective Young's modulus and Poisson's ratio. The developed elements are tested considering various problems prior to implementation in the in-house software package (viz., Finite Element Analysis of STructures, FEAST). Several SRM configurations are analyzed to assess the structural integrity under different loading conditions. Finite element analysis results are found to be in good agreement with those obtained earlier from MARC software. -- Highlights: • Developed efficient Herrmann elements. • Accuracy of finite elements demonstrated solving several known solution problems. • Time dependent structural response obtained using the direct inverse method of Schepary. • Performed structural analysis of grains under gravity, thermal and pressure loads

Systematic Integrated Process Design and Control of Binary Element Reactive Distillation Processes

DEFF Research Database (Denmark)

Mansouri, Seyed Soheil; Sales-Cruz, Mauricio; Huusom, Jakob Kjøbsted

2016-01-01

In this work, integrated process design and control of reactive distillation processes is considered through a computer-aided framework. First, a set of simple design methods for reactive distillation column that are similar in concept to non-reactive distillation design methods are extended...... to design-control of reactive distillation columns. These methods are based on the element concept where the reacting system of compounds is represented as elements. When only two elements are needed to represent the reacting system of more than two compounds, a binary element system is identified....... It is shown that the same design-control principles that apply to a non-reacting binary system of compounds are also valid for a reactive binary system of elements for distillation columns. Application of this framework shows that designing the reactive distillation process at the maximum driving force...

A discontinous Galerkin finite element method with an efficient time integration scheme for accurate simulations

KAUST Repository

Liu, Meilin; Bagci, Hakan

2011-01-01

A discontinuous Galerkin finite element method (DG-FEM) with a highly-accurate time integration scheme is presented. The scheme achieves its high accuracy using numerically constructed predictor-corrector integration coefficients. Numerical results

Social research design: framework for integrating philosophical and practical elements.

Science.gov (United States)

Cunningham, Kathryn Burns

2014-09-01

To provide and elucidate a comprehensible framework for the design of social research. An abundance of information exists concerning the process of designing social research. The overall message that can be gleaned is that numerable elements - both philosophical (ontological and epistemological assumptions and theoretical perspective) and practical (issue to be addressed, purpose, aims and research questions) - are influential in the process of selecting a research methodology and methods, and that these elements and their inter-relationships must be considered and explicated to ensure a coherent research design that enables well-founded and meaningful conclusions. There is a lack of guidance concerning the integration of practical and philosophical elements, hindering their consideration and explication. The author's PhD research into loneliness and cancer. This is a methodology paper. A guiding framework that incorporates all of the philosophical and practical elements influential in social research design is presented. The chronological and informative relationships between the elements are discussed. The framework presented can be used by social researchers to consider and explicate the practical and philosophical elements influential in the selection of a methodology and methods. It is hoped that the framework presented will aid social researchers with the design and the explication of the design of their research, thereby enhancing the credibility of their projects and enabling their research to establish well-founded and meaningful conclusions.

DPTEdb, an integrative database of transposable elements in dioecious plants.

Science.gov (United States)

Li, Shu-Fen; Zhang, Guo-Jun; Zhang, Xue-Jin; Yuan, Jin-Hong; Deng, Chuan-Liang; Gu, Lian-Feng; Gao, Wu-Jun

2016-01-01

Dioecious plants usually harbor 'young' sex chromosomes, providing an opportunity to study the early stages of sex chromosome evolution. Transposable elements (TEs) are mobile DNA elements frequently found in plants and are suggested to play important roles in plant sex chromosome evolution. The genomes of several dioecious plants have been sequenced, offering an opportunity to annotate and mine the TE data. However, comprehensive and unified annotation of TEs in these dioecious plants is still lacking. In this study, we constructed a dioecious plant transposable element database (DPTEdb). DPTEdb is a specific, comprehensive and unified relational database and web interface. We used a combination of de novo, structure-based and homology-based approaches to identify TEs from the genome assemblies of previously published data, as well as our own. The database currently integrates eight dioecious plant species and a total of 31 340 TEs along with classification information. DPTEdb provides user-friendly web interfaces to browse, search and download the TE sequences in the database. Users can also use tools, including BLAST, GetORF, HMMER, Cut sequence and JBrowse, to analyze TE data. Given the role of TEs in plant sex chromosome evolution, the database will contribute to the investigation of TEs in structural, functional and evolutionary dynamics of the genome of dioecious plants. In addition, the database will supplement the research of sex diversification and sex chromosome evolution of dioecious plants.Database URL: http://genedenovoweb.ticp.net:81/DPTEdb/index.php. © The Author(s) 2016. Published by Oxford University Press.

Nonlinear finite element modeling of vibration control of plane rod-type structural members with integrated piezoelectric patches

Science.gov (United States)

Chróścielewski, Jacek; Schmidt, Rüdiger; Eremeyev, Victor A.

2018-05-01

This paper addresses modeling and finite element analysis of the transient large-amplitude vibration response of thin rod-type structures (e.g., plane curved beams, arches, ring shells) and its control by integrated piezoelectric layers. A geometrically nonlinear finite beam element for the analysis of piezolaminated structures is developed that is based on the Bernoulli hypothesis and the assumptions of small strains and finite rotations of the normal. The finite element model can be applied to static, stability, and transient analysis of smart structures consisting of a master structure and integrated piezoelectric actuator layers or patches attached to the upper and lower surfaces. Two problems are studied extensively: (i) FE analyses of a clamped semicircular ring shell that has been used as a benchmark problem for linear vibration control in several recent papers are critically reviewed and extended to account for the effects of structural nonlinearity and (ii) a smart circular arch subjected to a hydrostatic pressure load is investigated statically and dynamically in order to study the shift of bifurcation and limit points, eigenfrequencies, and eigenvectors, as well as vibration control for loading conditions which may lead to dynamic loss of stability.

Numerical study on two-point contact by an explicit integration finite element method : A contribution to the modeling of flange squeal

NARCIS (Netherlands)

Yang, Z.; Li, Z.; Dollevoet, R.P.B.J.; Tournay, H; Grassie, S

2015-01-01

The precise mechanism which activates squeal, especially flange squeal has not been fully explained. The complex non-Hertzian contact and the broad-band high frequency feature bring great challenges to the modelling work of flange squeal. In this paper, an explicit integration finite element method

Engineering planetary exploration systems : Integrating novel technologies and the human element using work domain analysis

NARCIS (Netherlands)

Baker, C.; Naikar, N.; Neerincx, M.

2008-01-01

The realisation of sustainable space exploration and utilisation requires not only the development of novel concepts and technologies, but also their successful integration. Hardware, software, and the human element must be integrated effectively to make the dream for which these technologies were

Demosite - Demonstration of the integration of photovoltaic elements in buildings; DEMOSITE. Site de demonstration d'elements de construction photovoltaiques integres au batiment

Energy Technology Data Exchange (ETDEWEB)

Roecker, C.; Affolter, P.; Muller, A.N.; Ould-Yenia, A.

2003-07-01

This final report for the Swiss Federal Office of Energy summarises Phase 4 of the DEMOSITE project and concludes 10 years of DEMOSITE activities. The DEMOSITE project, started in 1992, demonstrates various ways of integrating photovoltaic elements in buildings by providing stands, pavilions and monitoring facilities at its site in Lausanne, Switzerland. Here, at the Swiss Federal Institute of Technology, roof-mounted installations can be found as well as mock-ups of buildings and roofing systems that also serve as covered parking facilities. The DEMOSITE web site and graphical presentations are also reviewed. Furthermore, the six newest pavilions are presented in detail. The report also presents several sets of data from measurements made on the installations and discusses the dissemination of information and results obtained from the project. A comprehensive annex provides illustrations of examples of building-integrated photovoltaics from around the world.

Evaluation of the Cultural Elements in the Textbook "Genki I: an Integrated Course in Elementary Japanese"

Science.gov (United States)

Er, Onur

2017-01-01

This study aims to examine the textbook "Genki I: An Integrated Course in Elementary Japanese" in terms of cultural elements. The data of this qualitative research were collected by means of the document review method. Content analysis, one of the qualitative analysis techniques, was used in the evaluation of the research data. A second…

Application of the integral method to modelling the oxidation of defected fuel elements

International Nuclear Information System (INIS)

Kolar, M.

1995-06-01

The starting point for this report is the discrepancy reported in previous work between the reaction-diffusion calculations and the CEX-1 experiment, which involves storage of defected fuel elements in air at 150 deg C. This discrepancy is considerably diminished here by a more critical choice of theoretical parameters, and by taking into account the fact that different CEX-1 fuel elements were oxidized at very different rates and that the fuel element used previously for comparison with theoretical calculations actually underwent two limited-oxygen-supply cycles. Much better agreement is obtained here between the theory and the third, unlimited-air, storage period of the CEX-1 experiment. The approximate integral method is used extensively for the solution of the one-dimensional diffusion moving-boundary problems that may describe various storage periods of the CEX-1 experiment. In some cases it is easy to extend this method to arbitrary precision by using higher moments of the diffusion equation. Using this method, the validity of quasi-steady-state approximation is verified. Diffusion-controlled oxidation is also studied. In this case, for the unlimited oxygen supply, the integral method leads to an exact analytical solution for linear geometry, and to a good analytical approximation of the solution for the spherically symmetric geometry. These solutions may have some application in the analysis of experiments on the oxidation of small UO 2 fragments or powders when the individual UO 2 grains may be considered to be approximately spherical. (author). 23 refs., 5 tabs., 11 figs

Redefinition and unification of the SXT/R391 family of integrative and conjugative elements.

Science.gov (United States)

Bioteau, Audrey; Durand, Romain; Burrus, Vincent

2018-04-13

Integrative and conjugative elements (ICEs) of the SXT/R391 family are key drivers of the spread of antibiotic resistance in Vibrio cholerae , the infectious agent of cholera, and other pathogenic bacteria. The SXT/R391 family of ICEs was defined based on the conservation of a core set of 52 genes and site-specific integration into the 5' end of the chromosomal gene prfC Hence, the integrase gene int has been intensively used as a marker to detect SXT/R391 ICEs in clinical isolates. ICEs sharing most core genes but differing by their integration site and integrase gene have been recently reported and excluded from the SXT/R391 family. Here we explored the prevalence and diversity of atypical ICEs in Genbank databases and their relationship with typical SXT/R391 ICEs. We found atypical ICEs in V. cholerae isolates that predate the emergence and expansion of typical SXT/R391 ICEs in the mid-1980s in seventh pandemic toxigenic V. cholerae O1 and O139 strains. Our analyses revealed that while atypical ICEs are not associated with antibiotic resistance genes, they often carry cation efflux pumps suggesting heavy metal resistance. Atypical ICEs constitute a polyphyletic group likely because of occasional recombination events with typical ICEs. Furthermore, we show that the alternative integration and excision genes of atypical ICEs remain under the control of SetCD, the main activator of the conjugative functions of SXT/R391 ICEs. Together these observations indicate that substitution of the integration/excision module and change of specificity of integration do not preclude atypical ICEs from inclusion into the SXT/R391 family. Importance Vibrio cholerae is the causative agent of cholera, an acute intestinal infection that remains to this day a world public health threat. Integrative and conjugative elements (ICEs) of the SXT/R391 family have played a major role in spreading antimicrobial resistance in seventh pandemic V. cholerae but also in several species of

Integration of fuzzy theory into Kano model for classification of service quality elements: A case study in a machinery industry of China

Directory of Open Access Journals (Sweden)

Qingliang Meng

2015-11-01

Full Text Available Purpose: The purpose of study is to meet customer requirements and improve customer satisfaction that aims to classify customer requirements more effectively. And the classification is focused on the customer psychology. Design/methodology/approach: In this study, considering the advantages of Kano model in taking into account both customer’s consuming psychology and motivation, and combining with fuzzy theory which is effective to cope with uncertainty and ambiguity, a Kano model based on fuzzy theory is proposed. In view of the strong subjectivity of traditional Kano questionnaires, a fuzzy Kano questionnaire to classify the service quality elements more objectively is proposed. Furthermore, this study will also develop a mathematical calculation performance according to the quality classification of fuzzy Kano model. It’s more objective than traditional Kano model to realize the service quality elements classification. With this method, the accurate mentality can be fully reasonable reflected in some unknown circumstances. Finally, an empirical study in Xuzhou Construction Machinery Group Co., Ltd, the largest manufacturing industry in China, is showed to testify its feasibility and validity. Findings: The calculation results indicate that the proposed model has good performance in classifying customer requirements. With this method, the accurate mentality can be fully reasonable reflected in unknown circumstances and it is more objective than traditional Kano model to classify the service quality elements. Originality/value: This study provides a method to integrate fuzzy theory and Kano model, and develops a mathematical calculation performance according to the quality classification of fuzzy Kano model.

A discontinous Galerkin finite element method with an efficient time integration scheme for accurate simulations

KAUST Repository

Liu, Meilin

2011-07-01

A discontinuous Galerkin finite element method (DG-FEM) with a highly-accurate time integration scheme is presented. The scheme achieves its high accuracy using numerically constructed predictor-corrector integration coefficients. Numerical results show that this new time integration scheme uses considerably larger time steps than the fourth-order Runge-Kutta method when combined with a DG-FEM using higher-order spatial discretization/basis functions for high accuracy. © 2011 IEEE.

Time-integration methods for finite element discretisations of the second-order Maxwell equation

NARCIS (Netherlands)

Sarmany, D.; Bochev, Mikhail A.; van der Vegt, Jacobus J.W.

This article deals with time integration for the second-order Maxwell equations with possibly non-zero conductivity in the context of the discontinuous Galerkin finite element method DG-FEM) and the $H(\\mathrm{curl})$-conforming FEM. For the spatial discretisation, hierarchic

Dimensional measurements and eddy currents control of the sheath integrity for a set of irradiated candu fuel elements

International Nuclear Information System (INIS)

Gheorghe, G.; Man, I.

2015-01-01

During irradiation in the nuclear reactor, fuel elements undergo dimensional and structural changes, and changes of sheath surface condition as well, which can lead to damages and even loss of integrity. This paper presents the results of dimensional measurements and of examination technique with eddy currents for three fuel elements of an irradiated CANDU fuel bundle. One of the fuel elements (FE), which is studied in detail, presented a crack about 40 mm long. The purpose of these nondestructive examination techniques is to determine those parameters that characterize the behavior and performance of nuclear fuel operation. This paper contains images of defects and interpretations of the causes of their occurrence. (authors)

Steps in creating a methodology for interpreting a geodiversity element -integrating a geodiversity element in the popular knowledge

Science.gov (United States)

Toma, Cristina; Andrasanu, Alexandru

2017-04-01

Conserving geodiversity and especially geological heritage is not very well integrated in the general knowledge as biodiversity is, for example. Keeping that in mind we are trying, through this research, to find a better way of transmitting a geological process to the general public. The means to integrate a geodiversity element in the popular knowledge is through interpretation. Interpretation "translates" the scientific information into a common language with very well known facts by the general public. The purpose of this paper is creating a framework for a methodology necessary in interpreting a geodiversity element - salt - in Buzau Land Geopark. We will approach the salt subject through a scheme in order to have a general view of the process and to better understand and explain it to the general public. We will look into the subject from three scientific points of view: GEODIVERSITY, ANTHROPOLOGY, and the SOCIO-ECONOMICAL aspect. Each of these points of view or domains will be divided into themes. For GEODIVERSITY we will have the following themes: Formation, Accumulation, Diapirism process, Chemical formula, Landscape (here we will include also the specific biodiversity with the halophile plants), Landforms, Hazard. For ANTHROPOLOGY will contain themes of tangible and intangible heritage like: Salt symbolistic, Stories and ritual usage, Recipes, How the knowledge is transmitted. The SOCIO-ECONOMIC aspect will be reflected through themes like: Extractive methods, Usage, Interdictions, Taxes, Commercial exchanges. Each theme will have a set of keywords that will be described and each one will be at the base of the elements that together will form the interpretation of the geodiversity element - the salt. The next step will be to clearly set the scope of the interpretation, to which field of expertise is our interpretation process addressed: Education (Undergraduate or post-graduate Students), Science, Geotourism, Entrepreneurship. After putting together the

Comparison of finite element J-integral evaluations for the blunt crack model and the sharp crack model

International Nuclear Information System (INIS)

Pan, Y.C.; Kennedy, J.M.

1983-01-01

In assessing the safety of a liquid metal fast breeder reactor (LMFBR), a major concern is that of hot sodium coming into contact with either unprotected concrete or steel-lined concrete equipment cells and containment structures. An aspect of this is the potential of concrete cracking which would significantly influence the safety assessment. Concrete cracking in finite element analysis can be modeled as a blunt crack in which the crack is assumed to be uniformly distributed throughout the area of the element. A blunt crack model based on the energy release rate and the effective strength concepts which was insensitive to the element size was presented by Bazant and Cedolin. Some difficulties were encountered in incorporating their approach into a general purpose finite element code. An approach based on the J-integral to circumvent some of the difficulties was proposed by Pan, Marchertas, and Kennedy. Alternatively, cracking can also be modeled as a sharp crack where the crack surface is treated as the boundary of the finite element mesh. The sharp crack model is adopted by most researchers and its J-integral has been well established. It is desirable to establish the correlation between the J-integrals, or the energy release rates, for the blunt crack model and the sharp crack model so that data obtained from one model can be used on the other

An improved acoustic Fourier boundary element method formulation using fast Fourier transform integration

NARCIS (Netherlands)

Kuijpers, A.H.W.M.; Verbeek, G.; Verheij, J.W.

1997-01-01

Effective use of the Fourier series boundary element method (FBEM) for everyday applications is hindered by the significant numerical problems that have to be overcome for its implementation. In the FBEM formulation for acoustics, some integrals over the angle of revolution arise, which need to be

Preliminary study or RSG-GAS reactor fuel element integrity

International Nuclear Information System (INIS)

Soejoedi, A.; Tarigan, A.; Sujalmo; Prayoga, S.; Suhadi

1996-01-01

After 8 years of operation, RSG-GAS was able to reach 15 cycles of reactor operation with 116 irradiated fuels, whereas 49 fuels were produced by NUKEM; and the other 67 were produced by PEBN-BATAN. At the 15 T h cycles, it have been used 40 standard fuels and 8 control fuels (Forty standard fuels and eight control fuels have been used in the 15 t h core cycles). Several activities have been performed in the reactor, to investigate the fuel integrity, among of them are: .fuel visual test with under water camera, which the results were recorder in the video cassette, primary water quality test during, reactor operation, fuel failure detector system examination and compared the PIE results in the Radiometallurgy Installation (RMI). The results showed that the fuel integrity, before and after irradiation, have still good performance and the fission products have not been released yet

Integrating Environmentally Responsive Elements in Buildings

DEFF Research Database (Denmark)

Heiselberg, Per

2006-01-01

Significant improvement have been achieved on efficiency improvements of specific building elements like the building envelope and building equipment and services and whilst most building elements still offer opportunities for efficiency improvements, the greatest future potential lie with techno......Significant improvement have been achieved on efficiency improvements of specific building elements like the building envelope and building equipment and services and whilst most building elements still offer opportunities for efficiency improvements, the greatest future potential lie...

Parametric study of the low-enriched uranium integrated Fort-Saint-Vrain element; comparative evaluation with the interacting tubular element

International Nuclear Information System (INIS)

Cerles, J.M.; Carvallo, G.; Vallepin, C.

1971-11-01

This paper presents a study of the influence of the different geometric and neutronic parameters on the calculation of the cycle with low-enriched uranium in a Fort-Saint-Vrain type brick. The study is divided in two parts: a stage of physics, essentially neutronics; an economical part where the costs are taken into account. At the level of studies of neutronics and costs, a parallel comparison is developed between the brick Fort-Saint-Vrain and the interacting tubular element, and even thorium. 6 refs. 29 figs [fr

On the integration of computer aided design and analysis using the finite element absolute nodal coordinate formulation

International Nuclear Information System (INIS)

Sanborn, Graham G.; Shabana, Ahmed A.

2009-01-01

For almost a decade, the finite element absolute nodal coordinate formulation (ANCF) has been used for both geometry and finite element representations. Because of the ANCF isoparametric property in the cases of beams, plates and shells, ANCF finite elements lend themselves easily to the geometric description of curves and surfaces, as demonstrated in the literature. The ANCF finite elements, therefore, are ideal for what is called isogeometric analysis that aims at the integration ofcomputer aided designandanalysis (ICADA), which involves the integration of what is now split into the separate fields of computer aided design (CAD) and computer aided analysis (CAA). The purpose of this investigation is to establish the relationship between the B-spline and NURBS, which are widely used in the geometric modeling, and the ANCF finite elements. It is shown in this study that by using the ANCF finite elements, one can in a straightforward manner obtain the control point representation required for the Bezier, B-spline and NURBS geometry. To this end, a coordinate transformation is used to write the ANCF gradient vectors in terms of control points. Unifying the CAD and CAA will require the use of such coordinate transformations and their inverses in order to transform control points to position vector gradients which are required for the formulation of the element transformations in the case of discontinuities as well as the formulation of the strain measures and the stress forces based on general continuum mechanics theory. In particular, fully parameterized ANCF finite elements can be very powerful in describing curve, surface, and volume geometry, and they can be effectively used to describe discontinuities while maintaining the many ANCF desirable features that include a constant mass matrix, zero Coriolis and centrifugal forces, no restriction on the amount of rotation or deformation within the finite element, ability for straightforward implementation of general

Use of the integration elements encoded by the temperate lactococcal bacteriophage TP901-1

DEFF Research Database (Denmark)

Brøndsted, Lone; Hammer, Karin

1999-01-01

Previously we showed that only one phage-expressed protein (Orf1), a 425-bp region upstream of the orf1 gene (presumably encoding a promoter), and the attP region are necessary and also sufficient for integration of the bacteriophage TP901-1 genome into the chromosome of Lactococcus lactis subsp......P region seem to be necessary for site-specific integration of the temperate bacteriophage TP901-1. By use of the integrative elements (attP and orf1) expressed by the temperate lactococcal bacteriophage TP901-1, a system for obtaining stable chromosomal single-copy transcriptional fusions in L. lactis...

Interplay of a non-conjugative integrative element and a conjugative plasmid in the spread of antibiotic resistance via suicidal plasmid transfer from an aquaculture Vibrio isolate.

Science.gov (United States)

Nonaka, Lisa; Yamamoto, Tatsuya; Maruyama, Fumito; Hirose, Yuu; Onishi, Yuki; Kobayashi, Takeshi; Suzuki, Satoru; Nomura, Nobuhiko; Masuda, Michiaki; Yano, Hirokazu

2018-01-01

The capture of antimicrobial resistance genes (ARGs) by mobile genetic elements (MGEs) plays a critical role in resistance acquisition for human-associated bacteria. Although aquaculture environments are recognized as important reservoirs of ARGs, intra- and intercellular mobility of MGEs discovered in marine organisms is poorly characterized. Here, we show a new pattern of interspecies ARGs transfer involving a 'non-conjugative' integrative element. To identify active MGEs in a Vibrio ponticus isolate, we conducted whole-genome sequencing of a transconjugant obtained by mating between Escherichia coli and Vibrio ponticus. This revealed integration of a plasmid (designated pSEA1) into the chromosome, consisting of a self-transmissible plasmid backbone of the MOBH group, ARGs, and a 13.8-kb integrative element Tn6283. Molecular genetics analysis suggested a two-step gene transfer model. First, Tn6283 integrates into the recipient chromosome during suicidal plasmid transfer, followed by homologous recombination between the Tn6283 copy in the chromosome and that in the newly transferred pSEA1. Tn6283 is unusual among integrative elements in that it apparently does not encode transfer function and its excision barely generates unoccupied donor sites. Thus, its movement is analogous to the transposition of insertion sequences rather than to that of canonical integrative and conjugative elements. Overall, this study reveals the presence of a previously unrecognized type of MGE in a marine organism, highlighting diversity in the mode of interspecies gene transfer.

A solution for the integration of finite element analysis in a ship design environment

International Nuclear Information System (INIS)

Finifter, D.; Wyniecki, P.; Castel, J. de

1982-01-01

The DEMAIN system for the pre- and post-processing of finite element analyses of ship structures is presented. It is shown that this new modelling concept, although being self-contained and specialized, has features which relate it to computer-aided design applications of a more general nature. Thus, compared to other finite element pre/post-processors, it allows a more natural occurrence of the structural analysis task in the design flow and can be considered a major step towards an integrated design and analysis system. (orig.)

Experimental Study of Elements Promoting Mixing in Fuel Elements

International Nuclear Information System (INIS)

Silin, Nicolas; Juanico, Luis; Delmastro, Dario

2003-01-01

In the present work a thermal tracing technique is used to measure the increase of the mixing between subchannels in the presence of different mixing elements.As representative elements a spacer, a spacer with mixing vanes and turbulence promoter buttons were considered.The performance of these elements was evaluated by studying the behavior of a thermal trace in each case.Also the pressure drop for each case is presented.The results present a qualitative and quantitative guide for the application of each one of these appendages in future nuclear elements

Standardization of Schwarz-Christoffel transformation for engineering design of semiconductor and hybrid integrated-circuit elements

Science.gov (United States)

Yashin, A. A.

1985-04-01

A semiconductor or hybrid structure into a calculable two-dimensional region mapped by the Schwarz-Christoffel transformation and a universal algorithm can be constructed on the basis of Maxwell's electro-magnetic-thermal similarity principle for engineering design of integrated-circuit elements. The design procedure involves conformal mapping of the original region into a polygon and then the latter into a rectangle with uniform field distribution, where conductances and capacitances are calculated, using tabulated standard mapping functions. Subsequent synthesis of a device requires inverse conformal mapping. Devices adaptable as integrated-circuit elements are high-resistance film resistors with periodic serration, distributed-resistance film attenuators with high transformation ratio, coplanar microstrip lines, bipolar transistors, directional couplers with distributed coupling to microstrip lines for microwave bulk devices, and quasirregular smooth matching transitions from asymmetric to coplanar microstrip lines.

Number-conserving random phase approximation with analytically integrated matrix elements

International Nuclear Information System (INIS)

Kyotoku, M.; Schmid, K.W.; Gruemmer, F.; Faessler, A.

1990-01-01

In the present paper a number conserving random phase approximation is derived as a special case of the recently developed random phase approximation in general symmetry projected quasiparticle mean fields. All the occurring integrals induced by the number projection are performed analytically after writing the various overlap and energy matrices in the random phase approximation equation as polynomials in the gauge angle. In the limit of a large number of particles the well-known pairing vibration matrix elements are recovered. We also present a new analytically number projected variational equation for the number conserving pairing problem

Integrated Circuit Interconnect Lines on Lossy Silicon Substrate with Finite Element Method

OpenAIRE

Sarhan M. Musa,; Matthew N. O. Sadiku

2014-01-01

The silicon substrate has a significant effect on the inductance parameter of a lossy interconnect line on integrated circuit. It is essential to take this into account in determining the transmission line electrical parameters. In this paper, a new quasi-TEM capacitance and inductance analysis of multiconductor multilayer interconnects is successfully demonstrated using finite element method (FEM). We specifically illustrate the electrostatic modeling of single and coupled in...

Molecular analysis of an integrative conjugative element, ICEH, present in the chromosome of different strains of Mycoplasma hyopneumoniae

Directory of Open Access Journals (Sweden)

Paulo Marcos Pinto

2007-01-01

Full Text Available Diversification of bacterial species and pathotypes is largely caused by lateral gene transfer (LGT of diverse mobile DNA elements such as plasmids, phages, transposons and genomic islands. Thus, acquisition of new phenotypes by LGT is very important for bacterial evolution and relationship with hosts. This paper reports a 23 kb region containing fourteen CDSs with similarity to the previous described Integrative Conjugal Element of Mycoplasma fermentans (ICEF. This element, named ICEH, is present as one copy at distinct integration sites in the chromosome of 7448 and 232 pathogenic strains and is absent in the type strain J (non-pathogenic. Notable differences in the nucleotide composition of the insertion sites were detected, and could be correlated to a lack of specificity of the ICEH integrase. Although present in strains of the same organism, the ICEH elements are more divergent than the typical similarity between other chromosomal locus of Mycoplasma hyopneunomiae, suggesting an accelerated evolution of these constins or an ongoing process of degeneration, while maintaining conservation of the tra genes. An extrachromosomal form of this element had been detected in the 7448 strain, suggesting a possible involvement in its mobilization and transference of CDSs to new hosts.

Study of candu fuel elements irradiated in a nuclear power plant

International Nuclear Information System (INIS)

Ionescu, S.; Uta, O.; Mincu, M.; Anghel, D.; Prisecaru, I.

2015-01-01

The object of this work is the behaviour of CANDU fuel elements after service in nuclear power plant. The results are analysed and compared with previous result obtained on unirradiated samples and with the results obtained on samples irradiated in the TRIGA reactor of INR Pitesti. Zircaloy-4 is the material used for CANDU fuel sheath. The importance of studying its behaviour results from the fact that the mechanical properties of the CANDU fuel sheath suffer modifications during normal and abnormal operation. In the nuclear reactor, the fuel elements endure dimensional and structural changes as well as cladding oxidation, hydriding and corrosion. These changes can lead to defects and even to the loss of integrity of the cladding. This paper presents the results of examinations performed in the Post Irradiation Examination Laboratory (PIEL) of INR Pitesti on samples from fuel elements after they were removed out of the nuclear power plant: - dimensional and macrostructural characterization; - microstructural characterization by metallographic analyses; - determination of mechanical properties; - fracture surface analysis by scanning electron microscopy (SEM). A full set of non-destructive and destructive examinations concerning the integrity, dimensional changes, oxidation, hydriding and mechanical properties of the cladding was performed. The obtained results are typical for CANDU 6-type fuel. The obtained data could be used to evaluate the security, reliability and nuclear fuel performance, and for the improvement of the CANDU fuel. (authors)

Textile antenna integrated with compact AMC and parasitic elements for WLAN/WBAN applications

Science.gov (United States)

Lago, Herwansyah; Soh, Ping Jack; Jamlos, Mohd Faizal; Shohaimi, Nursuriati; Yan, Sen; Vandenbosch, Guy A. E.

2016-12-01

A wearable antenna fully designed and fabricated using textile is presented. Both antenna and artificial magnetic conductor plane are designed for operation in the wireless local area network (WLAN)/wireless body area network (WBAN) band from 2.4 to 2.5 GHz. The AMC unit element is designed based on the rectangular patch structure, which is then integrated using slots and slits for bandwidth broadening. Meanwhile, the combination of the slits and L-shaped parasitic elements applied at four edges of the rectangular antenna structure enabled unidirectional radiation outwards from the body. The structure is coaxially fed using a rectangular ring slot centered on the radiating element. Simulated and measured reflection and radiation performance indicate a satisfactory agreement, fulfilling the requirements for WLAN/WBAN applications both in free space and on body. The shielding effectiveness provided by the AMC plane is also evaluated numerically in terms of specific absorption rate, indicating levels below the European regulatory limit of 2 W/kg.

Practical steps toward integrating economic, social and institutional elements in fisheries policy and management

DEFF Research Database (Denmark)

Stephenson, Robert L.; Benson, Ashleen J.; Brooks, Kate

2017-01-01

While international agreements and legislation call for incorporation of four pillars of sustainability, the social (including cultural), economic and institutional aspects (the ‘human dimension’) have been relatively neglected to date. Three key impediments have been identified: a relative lack...... of explicit social, economic and institutional objectives; a general lack of process (frameworks, governance) for routine integration of all four pillars of sustainability; and a bias towards biological considerations. Practical integration requires a ‘systems’ approach with explicit consideration...... in fisheries to immediately take five practical steps toward integrating ecological, economic, social and institutional aspects: (1) Adopt the perspective of the fishery as a ‘system’ with interacting natural, human and management elements; (2) Be aware of both strategic and operational aspects of fisheries...

Determination of integral K-shell Compton scattering cross-sections in elements 41>=Z>=51 for 1250 keV photons

Energy Technology Data Exchange (ETDEWEB)

Verma, S L; Allawadhi, K L; Sood, B S [Punjabi Univ., Patiala (India). Dept. of Physics

1978-04-01

Integral K-shell Compton scattering cross-sections in elements Nb, Mo, Ag, Cd, In, Sn and Sb have been determined for 1250 keV photons. The results when compared with theory suggest that K-shell electrons in the elements under investigation behave as free electrons.

Bending analysis of embedded nanoplates based on the integral formulation of Eringen's nonlocal theory using the finite element method

Science.gov (United States)

Ansari, R.; Torabi, J.; Norouzzadeh, A.

2018-04-01

Due to the capability of Eringen's nonlocal elasticity theory to capture the small length scale effect, it is widely used to study the mechanical behaviors of nanostructures. Previous studies have indicated that in some cases, the differential form of this theory cannot correctly predict the behavior of structure, and the integral form should be employed to avoid obtaining inconsistent results. The present study deals with the bending analysis of nanoplates resting on elastic foundation based on the integral formulation of Eringen's nonlocal theory. Since the formulation is presented in a general form, arbitrary kernel functions can be used. The first order shear deformation plate theory is considered to model the nanoplates, and the governing equations for both integral and differential forms are presented. Finally, the finite element method is applied to solve the problem. Selected results are given to investigate the effects of elastic foundation and to compare the predictions of integral nonlocal model with those of its differential nonlocal and local counterparts. It is found that by the use of proposed integral formulation of Eringen's nonlocal model, the paradox observed for the cantilever nanoplate is resolved.

Integrated System Validation Usability Questionnaire: Information Display Element

International Nuclear Information System (INIS)

Garcés, Ma. I.; Torralba, B.

2015-01-01

The Research and Development (R&D) project on “Theoretical and Methodological Approaches to Integrated System Validation of Control Rooms, 2014-2015”, in which the research activities described in this report are framed, has two main objectives: to develop the items for an usability methodology conceived as a part of the measurement framework for performance-based control room evaluation that the OECD Halden Reactor Project will test in the experiments planned for 2015; and the statistical analysis of the data generated in the experimental activities of the Halden Man-Machine Laboratory (HAMMLAB) facility, with previous usability questionnaires, in 2010 and 2011. In this report, the procedure designed to meet the first goal of the project is described, in particular, the process followed to identify the items related to information displays, one of the elements to be included in the usability questionnaire. Three phases are performed, in the first one, the approaches developed by the United States Nuclear Regulatory Commission, NRC, are reviewed and the models proposed by the nuclear energy industry and their technical support organizations, mainly, the United States Electric Power Research Institute, EPRI, are analyzed. In the remaining stages, general and specific guidelines for information displays, in particular, display pages, formats, elements and data quality and update rate recommendations are compared and criteria for the preliminary selection of the items that should be incorporated into the usability questionnaire are defined. This proposal will be reviewed and adapted by the Halden Reactor Project to the design of the specific experiments performed in HAMMLAB.

Sequential induction of three recombination directionality factors directs assembly of tripartite integrative and conjugative elements.

Science.gov (United States)

Haskett, Timothy L; Terpolilli, Jason J; Ramachandran, Vinoy K; Verdonk, Callum J; Poole, Phillip S; O'Hara, Graham W; Ramsay, Joshua P

2018-03-01

Tripartite integrative and conjugative elements (ICE3) are a novel form of ICE that exist as three separate DNA regions integrated within the genomes of Mesorhizobium spp. Prior to conjugative transfer the three ICE3 regions of M. ciceri WSM1271 ICEMcSym1271 combine and excise to form a single circular element. This assembly requires three coordinated recombination events involving three site-specific recombinases IntS, IntG and IntM. Here, we demonstrate that three excisionases-or recombination directionality factors-RdfS, RdfG and RdfM are required for ICE3 excision. Transcriptome sequencing revealed that expression of ICE3 transfer and conjugation genes was induced by quorum sensing. Quorum sensing activated expression of rdfS, and in turn RdfS stimulated transcription of both rdfG and rdfM. Therefore, RdfS acts as a "master controller" of ICE3 assembly and excision. The dependence of all three excisive reactions on RdfS ensures that ICE3 excision occurs via a stepwise sequence of recombination events that avoids splitting the chromosome into a non-viable configuration. These discoveries expose a surprisingly simple control system guiding molecular assembly of these novel and complex mobile genetic elements and highlight the diverse and critical functions of excisionase proteins in control of horizontal gene transfer.

Integrative study of the behavior of transuranic elements in the marine environment. Progress report, June 1, 1981-May 31, 1982

International Nuclear Information System (INIS)

Choppin, G.R.; Morse, J.W.

1981-12-01

The laboratory at Florida State University is conducting fundamental research under marine conditions of the speciation of actinide elements in sea water. At the Texas A and M University, the adsorption of actinides from such solutions upon various components of sediments is being studied. This approach should yield radiochemical data directly applicable to the understanding of the distribution and speciation of transuranic elements in the marine environment. A limited number of common sediment components are being studied to determine which factors determine the partitioning of transuranic elements among these components. The individual components then will be combined in synthetic sediments of increasing complexity and the distributions studied between these sediments and solutions. Hopefully, this will lead to studies agreeing with model predictions for the adsorption of transuranic elements in marine sediments

Element-topology-independent preconditioners for parallel finite element computations

Science.gov (United States)

Park, K. C.; Alexander, Scott

1992-01-01

A family of preconditioners for the solution of finite element equations are presented, which are element-topology independent and thus can be applicable to element order-free parallel computations. A key feature of the present preconditioners is the repeated use of element connectivity matrices and their left and right inverses. The properties and performance of the present preconditioners are demonstrated via beam and two-dimensional finite element matrices for implicit time integration computations.

Formation of elements of integrated acousto-optic cell based on LiNbO3 films by methods of nanotechnology

International Nuclear Information System (INIS)

Ageev, O A; Zamburg, E G; Kolomiytsev, A S; Suchkov, D O; Shipulin, I A; Shumov, A V

2015-01-01

In the experiments we defined modes, and developed the technology of formation of elements of input-output laser emission and microlens of integrated acousto-optic cell by Pulsed Laser Deposition and Focused Ion Beams by using nanotechnology cluster complex, allowing controlled creation of elements in a single process cycle. (paper)

Integrable nonlinear Schrödinger system on a lattice with three structural elements in the unit cell

Science.gov (United States)

Vakhnenko, Oleksiy O.

2018-05-01

Developing the idea of increasing the number of structural elements in the unit cell of a quasi-one-dimensional lattice as applied to the semi-discrete integrable systems of nonlinear Schrödinger type, we construct the zero-curvature representation for the general integrable nonlinear system on a lattice with three structural elements in the unit cell. The integrability of the obtained general system permits to find explicitly a number of local conservation laws responsible for the main features of system dynamics and in particular for the so-called natural constraints separating the field variables into the basic and the concomitant ones. Thus, considering the reduction to the semi-discrete integrable system of nonlinear Schrödinger type, we revealed the essentially nontrivial impact of concomitant fields on the Poisson structure and on the whole Hamiltonian formulation of system dynamics caused by the nonzero background values of these fields. On the other hand, the zero-curvature representation of a general nonlinear system serves as an indispensable key to the dressing procedure of system integration based upon the Darboux transformation of the auxiliary linear problem and the implicit Bäcklund transformation of field variables. Due to the symmetries inherent to the six-component semi-discrete integrable nonlinear Schrödinger system with attractive-type nonlinearities, the Darboux-Bäcklund dressing scheme is shown to be simplified considerably, giving rise to the appropriately parameterized multi-component soliton solution consisting of six basic and four concomitant components.

Identification of a Single Strand Origin of Replication in the Integrative and Conjugative Element ICEBs1 of Bacillus subtilis.

Directory of Open Access Journals (Sweden)

Laurel D Wright

2015-10-01

Full Text Available We identified a functional single strand origin of replication (sso in the integrative and conjugative element ICEBs1 of Bacillus subtilis. Integrative and conjugative elements (ICEs, also known as conjugative transposons are DNA elements typically found integrated into a bacterial chromosome where they are transmitted to daughter cells by chromosomal replication and cell division. Under certain conditions, ICEs become activated and excise from the host chromosome and can transfer to neighboring cells via the element-encoded conjugation machinery. Activated ICEBs1 undergoes autonomous rolling circle replication that is needed for the maintenance of the excised element in growing and dividing cells. Rolling circle replication, used by many plasmids and phages, generates single-stranded DNA (ssDNA. In many cases, the presence of an sso enhances the conversion of the ssDNA to double-stranded DNA (dsDNA by enabling priming of synthesis of the second DNA strand. We initially identified sso1 in ICEBs1 based on sequence similarity to the sso of an RCR plasmid. Several functional assays confirmed Sso activity. Genetic analyses indicated that ICEBs1 uses sso1 and at least one other region for second strand DNA synthesis. We found that Sso activity was important for two key aspects of the ICEBs1 lifecycle: 1 maintenance of the plasmid form of ICEBs1 in cells after excision from the chromosome, and 2 stable acquisition of ICEBs1 following transfer to a new host. We identified sequences similar to known plasmid sso's in several other ICEs. Together, our results indicate that many other ICEs contain at least one single strand origin of replication, that these ICEs likely undergo autonomous replication, and that replication contributes to the stability and spread of these elements.

Finite-element blunt-crack propagation: a modified J-integral approach

International Nuclear Information System (INIS)

Pan, Y.C.; Marchertas, A.H.; Kennedy, J.M.

1983-01-01

In assessing the safety of a liquid metal fast breeder reactor (LMFBR), a major concern is the behavior of concrete structures subjected to high temperatures. The potential of concrete cracking is an important parameter which could significantly influence the safety assessment of thermally attacked concrete. A new modified J-integral approach for the blunt crack model has been derived to provide a general procedure to accurately predict the direction of crack growth. This formulation has been incorporated into the coupled heat transfer-stress analysis finite element code TEMP-STRESS. A description of the formulation is presented in this paper. Results for the problems of a Mode I and mixed mode crack in a plate using regular and slanted meshes subjected to uniaxial and shear loading are presented

Finite element modeling for integrated solid-solid PCM-building material with varying phase change temperatures

Energy Technology Data Exchange (ETDEWEB)

Zhang, D.; Fung, A.S.; Siddiqui, O. [Ryerson Polytechnic Univ., Toronto, ON (Canada). Dept. of Mechanical and Industrial Engineering

2008-08-15

Solid-solid phase change materials (SSPCMs) are used to enhance thermal storage performance and reduce indoor temperature fluctuations in buildings. In this study, a finite element model (FEM) was used to investigate the thermal properties of different types of SSPCMs. An effective heat capacity method was used to develop the model. An integrated PCM-building material was analyzed in relation to temperature and heat flux profiles. Governing equations for the heat transfer process were composed of Navier-Stokes momentum equations; a mass conservation equation; and an energy conservation equation. Effective heat capacity was described as a linear function of the latent heat of fusion on both the heating and cooling processes. Data from the simulation were then compared with an experiment suing drywall, concrete and gypcrete samples. Heat flux across the surfaces and temperatures on the surfaces of the materials were measured. Data were used to validate the finite element model (FEM). Results of the study suggested that heat flux profiles are an effective means of understanding phase change processes. It was concluded that PCMs with lower phase change temperatures lengthened energy releases and improved thermal comfort in the building. 12 refs., 2 tabs., 14 figs.

Sequential induction of three recombination directionality factors directs assembly of tripartite integrative and conjugative elements.

Directory of Open Access Journals (Sweden)

Timothy L Haskett

2018-03-01

Full Text Available Tripartite integrative and conjugative elements (ICE3 are a novel form of ICE that exist as three separate DNA regions integrated within the genomes of Mesorhizobium spp. Prior to conjugative transfer the three ICE3 regions of M. ciceri WSM1271 ICEMcSym1271 combine and excise to form a single circular element. This assembly requires three coordinated recombination events involving three site-specific recombinases IntS, IntG and IntM. Here, we demonstrate that three excisionases-or recombination directionality factors-RdfS, RdfG and RdfM are required for ICE3 excision. Transcriptome sequencing revealed that expression of ICE3 transfer and conjugation genes was induced by quorum sensing. Quorum sensing activated expression of rdfS, and in turn RdfS stimulated transcription of both rdfG and rdfM. Therefore, RdfS acts as a "master controller" of ICE3 assembly and excision. The dependence of all three excisive reactions on RdfS ensures that ICE3 excision occurs via a stepwise sequence of recombination events that avoids splitting the chromosome into a non-viable configuration. These discoveries expose a surprisingly simple control system guiding molecular assembly of these novel and complex mobile genetic elements and highlight the diverse and critical functions of excisionase proteins in control of horizontal gene transfer.

Monolithic nanoscale photonics-electronics integration in silicon and other group IV elements

CERN Document Server

Radamson, Henry

2014-01-01

Silicon technology is evolving rapidly, particularly in board-to-board or chip-to chip applications. Increasingly, the electronic parts of silicon technology will carry out the data processing, while the photonic parts take care of the data communication. For the first time, this book describes the merging of photonics and electronics in silicon and other group IV elements. It presents the challenges, the limitations, and the upcoming possibilities of these developments. The book describes the evolution of CMOS integrated electronics, status and development, and the fundamentals of silicon p

Studies to single subassembly flow monitoring with a complete 7 element array under sodium

International Nuclear Information System (INIS)

Hess, B.; Ruppert, E.; Stehle, H.; Vinzens, K.

1975-01-01

As part of the SNR-300 R and D programme a complete clamped array, consisting of 4 full size fuel elements and 3 blanket elements was tested for more than 4000 hours at 600 deg C in the AKB sodium loop at Interatom, Bensberg. The test was split into two phases and the total cluster was prestrained in the second phase to simulate 15 mm subassembly displacement at the level of the upper bearing pads. Although this test was mainly considered as an endurance test to demonstrate the integrity of prestrained core elements, efforts were made to study the feasibility of single subassembly flow monitoring with this full size model of a core section. The results of these investigations are presented and discussed in this paper

RegRNA: an integrated web server for identifying regulatory RNA motifs and elements

OpenAIRE

Huang, Hsi-Yuan; Chien, Chia-Hung; Jen, Kuan-Hua; Huang, Hsien-Da

2006-01-01

Numerous regulatory structural motifs have been identified as playing essential roles in transcriptional and post-transcriptional regulation of gene expression. RegRNA is an integrated web server for identifying the homologs of regulatory RNA motifs and elements against an input mRNA sequence. Both sequence homologs and structural homologs of regulatory RNA motifs can be recognized. The regulatory RNA motifs supported in RegRNA are categorized into several classes: (i) motifs in mRNA 5′-untra...

Psychotherapy integration under scrutiny: investigating the impact of integrating emotion-focused components into a CBT-based approach: a study protocol of a randomized controlled trial.

Science.gov (United States)

Babl, Anna; Grosse Holtforth, Martin; Heer, Sara; Lin, Mu; Stähli, Annabarbara; Holstein, Dominique; Belz, Martina; Egenolf, Yvonne; Frischknecht, Eveline; Ramseyer, Fabian; Regli, Daniel; Schmied, Emma; Flückiger, Christoph; Brodbeck, Jeannette; Berger, Thomas; Caspar, Franz

2016-11-24

This currently recruiting randomized controlled trial investigates the effects of integrating components of Emotion-Focused Therapy (EFT) into Psychological Therapy (PT), an integrative form of cognitive-behavioral therapy in a manner that is directly mirroring common integrative practice in the sense of assimilative integration. Aims of the study are to understand how both, an existing therapy approach as well as the elements to be integrated, are affected by the integration and to clarify the role of emotional processing as a mediator of therapy outcome. A total of 130 adults with a diagnosed unipolar depressive, anxiety or adjustment disorder (seeking treatment at a psychotherapy outpatient clinic) are randomized to either treatment as usual (PT) with integrated emotion-focused components (TAU + EFT) or PT (TAU). Primary outcome variables are psychopathology and symptom severity at the end of therapy and at follow up; secondary outcome variables are interpersonal problems, psychological wellbeing, quality of life, attainment of individual therapy goals, and emotional competency. Furthermore, process variables such as the quality of the therapeutic relationship are studied as well as aptitude-treatment interactions. Variables are assessed at baseline, after 8 and 16 sessions, at the end of therapy, after 25 ± 3 sessions, and at 6, 12 and 36 month follow-up. Underlying mechanisms of change are investigated. Statistical analyses will be conducted using the appropriate multilevel approaches, mainly two-level regression and growth analysis. The results of this study will indicate whether the integration of emotion-focused elements into treatment as usual increases the effectiveness of Psychological Therapy. If advantages are found, which may be limited to particular variables or subgroups of patients, recommendations for a systematic integration, and caveats if also disadvantages are detected, can be formulated. On a more abstract level, a cognitive

Plasma facing components integration studies for the WEST divertor

Energy Technology Data Exchange (ETDEWEB)

Ferlay, Fabien, E-mail: fabien.ferlay@cea.fr; Missirlian, Marc; Guilhem, Dominique; Firdaouss, Mehdi; Richou, Marianne; Doceul, Louis; Faisse, Frédéric; Languille, Pascal; Larroque, Sébastien; Martinez, André; Proust, Maxime; Louison, Céphise; Jeanne, Florian; Saille, Alain; Samaille, Frank; Verger, Jean-Marc; Bucalossi, Jérôme

2015-10-15

Highlights: • The divertor PFU integration has been studied regarding existing environment. • Magnetic, electric, thermal, hydraulic, mechanical loads and assembly are considered. - Abstract: In the context of the Tokamak Tore-Supra evolution, the CEA aims at transforming it into a test bench for ITER actively cooled tungsten (ACW) plasma facing components (PFC). This project named WEST (Tungsten Environment in Steady state Tokamak) is especially focused on the divertor target. The modification of the machine, by adding two axisymmetric divertors will make feasible an H-mode with an X-point close to the lower divertor. This environment will allow exposing the divertor ACW components up to 20 MW/m{sup 2} heat flux during long pulse. These specifications are well suited to test the ITER-like ACW target elements, respecting the ITER design. One challenge in such machine evolution is to integrate components in an existing vacuum vessel in order to obtain the best achievable performance. This paper deals with the design integration of ITER ACW target elements into the WEST environment considering magnetic, electric, thermal and mechanical loads. The feasibility of installation and maintenance has to be strongly considered as these PFC could be replaced several times. The ports size allows entering a 30° sector of pre-installed tungsten targets which will be plugged as quickly and easily as possible. The main feature of steady state operation is the active cooling, which leads to have many embedded cooling channels and bulky pipes on the PFC module including many connections and sealings between vacuum and water channels. The 30° sector design is now finalized regarding the ITER ACW elements specifications. No major modifications are expected.

Selection Ideal Coal Suppliers of Thermal Power Plants Using the Matter-Element Extension Model with Integrated Empowerment Method for Sustainability

Directory of Open Access Journals (Sweden)

Zhongfu Tan

2014-01-01

Full Text Available In order to reduce thermal power generation cost and improve its market competitiveness, considering fuel quality, cost, creditworthiness, and sustainable development capacity factors, this paper established the evaluation system for coal supplier selection of thermal power and put forward the coal supplier selection strategies for thermal power based on integrated empowering and ideal matter-element extension models. On the one hand, the integrated empowering model can overcome the limitations of subjective and objective methods to determine weights, better balance subjective, and objective information. On the other hand, since the evaluation results of the traditional element extension model may fall into the same class and only get part of the order results, in order to overcome this shortcoming, the idealistic matter-element extension model is constructed. It selects the ideal positive and negative matter-elements classical field and uses the closeness degree to replace traditional maximum degree of membership criterion and calculates the positive or negative distance between the matter-element to be evaluated and the ideal matter-element; then it can get the full order results of the evaluation schemes. Simulated and compared with the TOPSIS method, Romania selection method, and PROMETHEE method, numerical example results show that the method put forward by this paper is effective and reliable.

An Integrated 4-element Slot-Based MIMO and an UWB Sensing Antenna System for CR Platforms

KAUST Repository

Hussain, Rifaqat; Sharawi, Mohammad S.; Shamim, Atif

2017-01-01

This paper presents a novel integrated antenna system for cognitive radio (CR) applications. The design consists of a compact 4- element reconfigurable annular slot based multiple-input-multiple-output (MIMO) antenna system integrated within an ultra-wide-band (UWB) sensing antenna. All the antenna elements are planar in structure and designed on a single substrate (RO-4350) with dimensions 60×120×1.5 mm3. The frequency reconfigurable slot based MIMO antenna system is tuned over a wide frequency band from 1.77 GHz to 2.51 GHz while the UWB sensing antenna is covering from 0.75~7.65 GHz The proposed antenna system is suitable for CR enabled wireless devices. The envelope correlation coefficient (ECC) did not exceed 0.248 in the entire operating band of the MIMO antenna part. The maximum measured gain of the MIMO antenna is 3.2 dBi with maximum efficiency of 81%.

An Integrated 4-element Slot-Based MIMO and an UWB Sensing Antenna System for CR Platforms

KAUST Repository

Hussain, Rifaqat

2017-12-08

This paper presents a novel integrated antenna system for cognitive radio (CR) applications. The design consists of a compact 4- element reconfigurable annular slot based multiple-input-multiple-output (MIMO) antenna system integrated within an ultra-wide-band (UWB) sensing antenna. All the antenna elements are planar in structure and designed on a single substrate (RO-4350) with dimensions 60×120×1.5 mm3. The frequency reconfigurable slot based MIMO antenna system is tuned over a wide frequency band from 1.77 GHz to 2.51 GHz while the UWB sensing antenna is covering from 0.75~7.65 GHz The proposed antenna system is suitable for CR enabled wireless devices. The envelope correlation coefficient (ECC) did not exceed 0.248 in the entire operating band of the MIMO antenna part. The maximum measured gain of the MIMO antenna is 3.2 dBi with maximum efficiency of 81%.

Infill architecture: Design approaches for in-between buildings and 'bond' as integrative element

Directory of Open Access Journals (Sweden)

Alfirević Đorđe

2015-01-01

Full Text Available The aim of the paper is to draw attention to the view that the two key elements in achieving good quality of architecture infill in immediate, current surroundings, are the selection of optimal creative method of infill architecture and adequate application of 'the bond' as integrative element, The success of achievement and the quality of architectural infill mainly depend on the assessment of various circumstances, but also on the professionalism, creativity, sensibility, and finally innovativeness of the architect, In order for the infill procedure to be carried out adequately, it is necessary to carry out the assessment of quality of the current surroundings that the object will be integrated into, and then to choose the creative approach that will allow the object to establish an optimal dialogue with its surroundings, On a wider scale, both theory and the practice differentiate thee main creative approaches to infill objects: amimetic approach (mimesis, bassociative approach and ccontrasting approach, Which of the stated approaches will be chosen depends primarily on the fact whether the existing physical structure into which the object is being infilled is 'distinct', 'specific' or 'indistinct', but it also depends on the inclination of the designer, 'The bond' is a term which in architecture denotes an element or zone of one object, but in some instances it can refer to the whole object which has been articulated in a specific way, with an aim of reaching the solution for the visual conflict as is often the case in situations when there is a clash between the existing objects and the newly designed or reconstructed object, This paper provides in-depth analysis of different types of bonds, such as 'direction as bond', 'cornice as bond', 'structure as bond', 'texture as bond' and 'material as bond', which indicate complexity and multiple layers of the designing process of object interpolation.

The design and performance evaluation of the ultrasonic random coil identity-integrity element for underwater safeguards seals

International Nuclear Information System (INIS)

Allen, V.H.; Backer, S.; Smith, M.T.

1983-06-01

Irradiated fuel discharged from CANDU power reactors is stored underwater and, in order to comply with the requirements of International Safe-guards, the fuel is stacked in sealed containers which are examined at intervals by IAEA inspectors. The seals are verified for identity and integrity and this report describes the design of an identity/integrity element for the seals. The element is in the form of a random coil of wire which is interrogated by ultrasonic methods. An evaluation of thirty-six seals is reported. The application of seals to stacks of fuel was simulated in a water-filled bay at CRNL and repetitive verification measurements were made which simulated inspection procedures. The seal identity signatures were compared using cross-correlation methods and the results show that a broken or tampered seal can be identified with a high level of confidence

Effect of Integration Patterns Around Implant Neck on Stress Distribution in Peri-Implant Bone: A Finite Element Analysis.

Science.gov (United States)

Han, Jingyun; Sun, Yuchun; Wang, Chao

2017-08-01

To investigate the biomechanical performance of different osseointegration patterns between cortical bone and implants using finite element analysis. Fifteen finite element models were constructed of the mandibular fixed prosthesis supported by implants. Masticatory loads (200 N axial, 100 N oblique, 40 N horizontal) were applied. The cortical bone/implant interface was divided equally into four layers: upper, upper-middle, lower-middle, and lower. The bone stress and implant displacement were calculated for 5 degrees of uniform integration (0, 20%, 40%, 60%, and 100%) and 10 integration patterns. The stress was concentrated in the bone margin and gradually decreased as osseointegration progressed, when the integrated and nonintegrated areas were alternated on the bone-implant surface. Compared with full integration, the integration of only the lower-middle layer or lower half layers significantly decreased von Mises, tensile, and compressive stresses in cortical bone under oblique and horizontal loads, and these patterns did not induce higher stress in the cancellous bone. For the integration of only the upper or upper-middle layer, stress in the cortical and cancellous bones significantly increased and was considerably higher than in the case of nonintegration. In addition, the maximum stress in the cortical bone was sensitive to the quantity of integrated nodes at the bone margin; lower quantity was associated with higher stress. There was no significant difference in the displacement of implants among 15 models. Integration patterns of cortical bone significantly affect stress distribution in peri-implant bone. The integration of only the lower-middle or lower half layers helps to increase the load-bearing capacity of peri-implant bone and decrease the risk of overloading, while upper integration may further increase the risk of bone resorption. © 2016 by the American College of Prosthodontists.

Super-Light Prefabricated Deck Element Integrated in Traditional Concrete Prefabricated Element Construction

DEFF Research Database (Denmark)

Christensen, Jacob Ellehauge; Hertz, Kristian Dahl

Super-light structures in form of deck elements have been used for the first time in a building to construct indoor pedestrian bridges. Examples of connections to external structures and other super-light deck elements are given along with other details. Other examples on the great versatility...

Characterization of a new CAMP factor carried by an integrative and conjugative element in Streptococcus agalactiae and spreading in Streptococci.

Directory of Open Access Journals (Sweden)

Sarah Chuzeville

Full Text Available Genetic exchanges between Streptococci occur frequently and contribute to their genome diversification. Most of sequenced streptococcal genomes carry multiple mobile genetic elements including Integrative and Conjugative Elements (ICEs that play a major role in these horizontal gene transfers. In addition to genes involved in their mobility and regulation, ICEs also carry genes that can confer selective advantages to bacteria. Numerous elements have been described in S. agalactiae especially those integrated at the 3' end of a tRNA(Lys encoding gene. In strain 515 of S. agalactiae, an invasive neonate human pathogen, the ICE (called 515_tRNA(Lys is functional and carries different putative virulence genes including one encoding a putative new CAMP factor in addition to the one previously described. This work demonstrated the functionality of this CAMP factor (CAMP factor II in Lactococcus lactis but also in pathogenic strains of veterinary origin. The search for co-hemolytic factors in a collection of field strains revealed their presence in S. uberis, S. dysgalactiae, but also for the first time in S. equisimilis and S. bovis. Sequencing of these genes revealed the prevalence of a species-specific factor in S. uberis strains (Uberis factor and the presence of a CAMP factor II encoding gene in S. bovis and S. equisimilis. Furthermore, most of the CAMP factor II positive strains also carried an element integrated in the tRNA(Lys gene. This work thus describes a CAMP factor that is carried by a mobile genetic element and has spread to different streptococcal species.

Integration of finite element analysis and design of experiments to analyse the geometrical factors in bi-layered tube hydroforming

International Nuclear Information System (INIS)

Alaswad, A.; Olabi, A.G.; Benyounis, K.Y.

2011-01-01

Tube hydroforming (THF) is a type of unconventional metal forming process in which high fluid pressure and axial feed are used to deform a tube blank in the desired shape. Bi-layered tube hydroforming is suitable to produce bi-layered joints to be used in special applications such as aerospace, oil production and nuclear power plants. In this work, a finite element study along with response surface methodology (RSM) for design of experiment (DOE) has been used to construct models for three responses namely: bulge height, thickness reduction, and wrinkle height as a function of geometrical factors for X shape bi-layered tube hydroforming. A finite element model was built and experimentally validated. The models developed using finite element analysis (FEA) and RSM was found to be educated. The factors effect and their interactions on the three responses were determined and discussed. Such integration was proved to be a successful technique that can be used to predict the geometry of the hydroformed part.

Atomic pile Directorate, Department of Metallurgy, Departments of Technology, Department of Fuel Elements and Structures, Division of Study of Fuel Elements - Semi annual report on the 1968-10-1

International Nuclear Information System (INIS)

Arnaud, M.; Tortel, J.; Viallet, H.; Marinot, R.; Rulleau, A.; Lestiboudois, G.; Rousseau, G.; Faussat, A.; Ollier, H.; Truffert, J.; Ferrier, C.; Courcon, P.; Rendu, M.; Dieumegard, M.; Bret, A.

1968-01-01

This document gathers a set of reports of studies performed on nuclear fuel elements. The addressed topics are: creep behaviour of UMo and UMoAl tubes and pellets under the action of an external pressure (creep strength of tubes under external pressure, creep strength of pellets under external pressure, uncertainties on irradiation parameters in Pegase), problems related to centring devices (measurements and tests), irradiations of ring elements in power reactors, uranium/sheath metallurgical relationship for Bugey and influence of irradiation (cartridge behaviour in Pegase, long duration irradiation in power reactors, extrapolation in Bugey of results obtained in G2), theoretical study of kinetic oxidation phenomena in metal fuels, tests of leaking cartridges in EdF2, evolution of pressure in EL4 type irradiated fuel rods with ZrCu liners with respect to the conductivity integral, a focus on irradiations of Z0 type fuel elements in Pegase, cluster safety tests with uranium carbide in pile and out of pile, a review of studies performed on fuel elements with blowhole, and application of neutrography to fuel elements

A comparison of integral block and tubular interacting fuel element concepts for low enrichment HTR

Energy Technology Data Exchange (ETDEWEB)

Desoisa, J A

1972-04-15

The tubular interacting fuel element has to date been the favoured U.K. high temperature reactor design. Recent attempts to lower fuel costs and the progress of the Fort St. Vrain reactor has focussed attention on alternative designs, and in particular on the attractive design simplicity of the integral block concept. The aim of this investigation is to compare the merits of both concepts from fuel cycle cost and thermal performance viewpoints and to determine whether optimization of the integral block concept leads to changes in the current design values of (a) fuel density, (b) Nc/Nu, and/or (c) mean discharge irradiation within the framework of present design limits.

Current status of the transient integral fuel element performance code URANUS

International Nuclear Information System (INIS)

Preusser, T.; Lassmann, K.

1983-01-01

To investigate the behavior of fuel pins during normal and off-normal operation, the integral fuel rod code URANUS has been extended to include a transient version. The paper describes the current status of the program system including a presentation of newly developed models for hypothetical accident investigation. The main objective of current development work is to improve the modelling of fuel and clad material behavior during fast transients. URANUS allows detailed analysis of experiments until the onset of strong material transport phenomena. Transient fission gas analysis is carried out due to the coupling with a special version of the LANGZEIT-KURZZEIT-code (KfK). Fuel restructuring and grain growth kinetics models have been improved recently to better characterize pre-experimental steady-state operation; transient models are under development. Extensive verification of the new version has been carried out by comparison with analytical solutions, experimental evidence, and code-to-code evaluation studies. URANUS, with all these improvements, has been successfully applied to difficult fast breeder fuel rod analysis including TOP, LOF, TUCOP, local coolant blockage and specific carbide fuel experiments. Objective of further studies is the description of transient PCMI. It is expected that the results of these developments will contribute significantly to the understanding of fuel element structural behavior during severe transients. (orig.)

Dynamical analysis of a PWR internals using super-elements in an integrated 3-D model model. Part 1: model description and static tests

International Nuclear Information System (INIS)

Jesus Miranda, C.A. de.

1992-01-01

An integrated 3-D model of a research PWR reactor core support internals structures was developed for its dynamic analyses. The static tests for the validation of the model are presented. There are about 90 super-elements with, approximately, 85000 degrees of freedom (DoF), 8200 masters DoF, 12000 elements with about 8400 thin shell elements. A DEC VAX computer 11/785 model and the ANSYS program were used. If impacts occurs the spectral seismic analysis will be changed to a non-linear one with direct integration of the displacement pulse derived from the seismic accelerogram. This last will be obtained from the seismic acceleration response spectra. (author)

Energy balance of photovoltaic elements integrated in buildings; Energiebilanz gebaeudeintegrierter Photovoltaik

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

A planning tool for the thermal characteristics of integrated PV modules was to be developed and validated by measurements which provides U and g values as well as heating and cooling loads of such external wall or roof elements. In a cooperative project with medium-sized producers of PV wall systems, two different wall systems (i.e. insulating glass and ventilated warm external walls) were analyzed. [German] In dem Forschungsvorhaben sollte ein messtechnisch validiertes Planungswerkzeug fuer die thermischen Kennwerte von gebaeudeintegrierten Photovoltaikmodulen entwickelt werden, welches Bauteilkennwerte (U- und g-Werte) sowie moegliche Heiz- und Kuehllasten solcher Fassaden- oder Dachsysteme liefert. Durch die Zusammenarbeit mit mittelstaendischen PV-Fassadenherstellern sollten zwei Fassadensysteme - Isolierglasverbund und hinterlueftete Warmfassade - an konkreten Projekten messtechnisch erfasst und analysiert werden. (orig.)

Dietary patterns and trace elements intake evaluation

International Nuclear Information System (INIS)

Rahman, A.; Waheed, S.; Zaidi, J.H.; Ahmad, S.

1998-01-01

The dietary patterns and trace element contents of the integrated diets of middle income population in Gujranwala and of Islamabad have been studied and dietary intake of winter and summer are given. An overview of the elemental concentration in the two sets of integrated diets reveals similar zinc and manganese concentrations; comparatively higher nickel, selenium and potassium concentrations in Gujranwala and higher chromium, cesium, scandium, sodium and chlorine concentrations in Islamabad. These results undoubtedly reflect the difference in food selection and habits of the two populations, the influence of soil content and industrial pollution

An adjustable RF tuning element for microwave, millimeter wave, and submillimeter wave integrated circuits

Science.gov (United States)

Lubecke, Victor M.; Mcgrath, William R.; Rutledge, David B.

1991-01-01

Planar RF circuits are used in a wide range of applications from 1 GHz to 300 GHz, including radar, communications, commercial RF test instruments, and remote sensing radiometers. These circuits, however, provide only fixed tuning elements. This lack of adjustability puts severe demands on circuit design procedures and materials parameters. We have developed a novel tuning element which can be incorporated into the design of a planar circuit in order to allow active, post-fabrication tuning by varying the electrical length of a coplanar strip transmission line. It consists of a series of thin plates which can slide in unison along the transmission line, and the size and spacing of the plates are designed to provide a large reflection of RF power over a useful frequency bandwidth. Tests of this structure at 1 GHz to 3 Ghz showed that it produced a reflection coefficient greater than 0.90 over a 20 percent bandwidth. A 2 GHz circuit incorporating this tuning element was also tested to demonstrate practical tuning ranges. This structure can be fabricated for frequencies as high as 1000 GHz using existing micromachining techniques. Many commercial applications can benefit from this micromechanical RF tuning element, as it will aid in extending microwave integrated circuit technology into the high millimeter wave and submillimeter wave bands by easing constraints on circuit technology.

Integrated strain array for cellular mechanobiology studies

International Nuclear Information System (INIS)

Simmons, C S; Sim, J Y; Baechtold, P; Chung, C; Borghi, N; Pruitt, B L; Gonzalez, A

2011-01-01

We have developed an integrated strain array for cell culture enabling high-throughput mechano-transduction studies. Biocompatible cell culture chambers were integrated with an acrylic pneumatic compartment and microprocessor-based control system. Each element of the array consists of a deformable membrane supported by a cylindrical pillar within a well. For user-prescribed waveforms, the annular region of the deformable membrane is pulled into the well around the pillar under vacuum, causing the pillar-supported region with cultured cells to be stretched biaxially. The optically clear device and pillar-based mechanism of operation enables imaging on standard laboratory microscopes. Straightforward fabrication utilizes off-the-shelf components, soft lithography techniques in polydimethylsiloxane and laser ablation of acrylic sheets. Proof of compatibility with basic biological assays and standard imaging equipment were accomplished by straining C2C12 skeletal myoblasts on the device for 6 h. At higher strains, cells and actin stress fibers realign with a circumferential preference

Multi Elemental Study Using Prompt Gamma Technique

International Nuclear Information System (INIS)

Normanshah Dahing; Muhamad Samudi Yasir; Normanshah Dahing; Hanafi Ithnin; Mohd Fitri Abdul Rahman; Hearie Hassan

2016-01-01

In this study, principle of prompt gamma neutron activation analysis has been used as a technique to determine the elements in the sample. The system consists of collimated isotopic neutron source, Cf-252 with HPGe detector and Multichannel Analysis (MCA). Concrete with size of 10x10x10 cm 3 and 15x15x15 cm 3 were analysed as sample. When neutrons enter and interact with elements in the concrete, the neutron capture reaction will occur and produce characteristic prompt gamma ray of the elements. The preliminary result of this study demonstrate the major element in the concrete was determined such as Si, Mg, Ca, Al, Fe and H as well as others element, such as Cl by analysis the gamma ray lines respectively. The results obtained were compared with computer simulation, NAA and XRF as a part of reference and validation. The potential and the capability of neutron induced prompt gamma as tool for multi elemental analysis qualitatively to identify the elements present in the concrete sample discussed. (author)

Study of the thermomechanical stability of the fuel element; Proucavanje termo-mehanickih osobina stabilnosti gorivnog elementa

Energy Technology Data Exchange (ETDEWEB)

Pavlovic, M J [Institute of Nuclear Sciences Boris Kidric, Vinca, Beograd (Serbia and Montenegro)

1968-11-15

Methods were developed for calculating the optimum geometry of the fuel rod which should contain the maximum pressure of the fission products. The study was concerned with the tension caused by the inner pressure of the fission gases, and the heat transfer through the cladding. Permitted pressure of the fission gases was estimated to achieve maximum at optimum value of the ration between the cladding thickness and the fuel element. Any discrepancy from the optimum value decreases the fission gas pressure. Optimum ratio (t/d{sub g}) ){sub opt} = 0,065 was calculated for the Zircaloy cladding at 300 deg C and fuel having {integral} kdT=42 watt/cm. Value {integral} kdT = 42 watt/cm refers to the temperature value of approximately 2400 deg C in the center of the fuel element, for the adopted geometry of the UO{sub 2} fuel, which is below the melting point. Dimension stability of the fuel was investigated as well as the sources of dimension changes of the UO{sub 2} fuel. Thermal expansion was studied separately because of the cladding integrity and tolerance within the fuel element. If the fuel is used under temperatures higher than melting point of UO{sub 2} the fuel element integrity would be seriously affected. Some methods for solving such problems are proposed. Razvijeni su izrazi za proracun optimalne geometrije sipke gorivnog elementa, koja treba da sadrzi maksimalni pritisak fisionih gasova. Razmatranja su vrsena kako sa gledista napona koje prouzrokuje unutrasnji pritisak fisionih gasova, tako i sa gledista prenosa toplote kroz kosuljicu. Dozvoljeni pritisak fisionih gasova, predvidjeno je da postigne svoj maksimum pri optimalnoj vrednosti odnosa debljine zida kosuljice prema precniku gorivnog elementa. Svako odstupanje od optimalne vrednosti snizava vrednost pritiska fisionih gasova. Za kosuljicu od Zircaloy-2 na 300 deg C i gorivo koje ima {integral} kdT=42 wat/cm, optimalna vrednost odnosa t/d{sub g} izracunata je: (t/d{sub g}){sub opt} = 0,065, a maksimalni

Deciphering the genomes of 16 Acanthamoeba species does not provide evidence of integration of known giant virus-associated mobile genetic elements.

Science.gov (United States)

Chelkha, Nisrine; Colson, Philippe; Levasseur, Anthony; La Scola, Bernard

2018-06-02

Giant viruses infect protozoa, especially amoebae of the genus Acanthamoeba. These viruses possess genetic elements named Mobilome. So far, this mobilome comprises provirophages which are integrated into the genome of their hosts, transpovirons, and Maverick/Polintons. Virophages replicate inside virus factories within Acanthamoeba and can decrease the infectivity of giant viruses. The virophage infecting CroV was found to be integrated in the host of CroV, Cafeteria roenbergensis, thus protecting C. roenbergensis by reduction of CroV multiplication. Because of this unique property, assessment of the mechanisms of replication of virophages and their relationship with giant viruses is a key element of this investigation. This work aimed at evaluating the presence and the dynamic of these mobile elements in sixteen Acanthamoeba genomes. No significant traces of the integration of genomes or sequences from known virophages were identified in all the available Acanthamoeba genomes. These results brought us to hypothesize that the interactions between mimiviruses and their virophages might occur through different mechanisms, or at low frequency. An additional explanation could be that our knowledge of the diversity of virophages is still very limited. Copyright © 2018 Elsevier B.V. All rights reserved.

A study on human hair element content as monitor for trace elements pollution in Eg

International Nuclear Information System (INIS)

Tadros, N.; Metwally, E.

2004-01-01

Trace element content in human is a suitable indicator of exposure to trace element pollutants. Concentration levels of 12 trace elements in human head hair samples collected from more than 23 individuals have been determined. The collected hair samples were classified into four groups collected from workers at nuclear research center and others far away from the center. Neutron activation analysis technique was used in the preset study. The data reported for trace elements content in different hair samples were discussed. Significant differences were observed for several elements levels. comparative studies demonstrated that the concentration of some elements in hair of exposed workers, are greater than those corresponding to non exposed workers. Also, there was no clear significant correlation between the elements content of different hair samples and the age of the donors

Precise integration of inducible transcriptional elements (PrIITE) enables absolute control of gene expression

DEFF Research Database (Denmark)

Pinto, Rita; Hansen, Lars; Hintze, John

2017-01-01

to be a limitation. Here, we report that the combined use of genome editing tools and last generation Tet-On systems can resolve these issues. Our principle is based on precise integration of inducible transcriptional elements (coined PrIITE) targeted to: (i) exons of an endogenous gene of interest (GOI) and (ii......Tetracycline-based inducible systems provide powerful methods for functional studies where gene expression can be controlled. However, the lack of tight control of the inducible system, leading to leakiness and adverse effects caused by undesirable tetracycline dosage requirements, has proven......) a safe harbor locus. Using PrIITE cells harboring a GFP reporter or CDX2 transcription factor, we demonstrate discrete inducibility of gene expression with complete abrogation of leakiness. CDX2 PrIITE cells generated by this approach uncovered novel CDX2 downstream effector genes. Our results provide...

A case study: Integrated work environment and organizational change

Energy Technology Data Exchange (ETDEWEB)

Heubach, J.G.; Montgomery, J.C.; Weimer, W.C. [Pacific Northwest Lab., Richland, WA (United States); Heerwagen, J.H. [Battelle Seattle Research Center, WA (United States)

1995-02-01

The failure to integrate environmental and organizational interventions may help explain the lack of success of many change efforts. The high rate of failure for change efforts (50% to 90% failure rates) has been noted by many writers. While specific causes of failure are diverse, a common theme has been failure to consider the organization as a system. That is, either significant aspects of the organization were ignored during the intervention or potential impacts of changes on the elements were overlooked or underestimated. Our own training, technical literature, and professional culture lead us to limited understandings of complex organizations. Change agents must consider all relevant components of organizational performance if interventions are to be meaningful and successful. This study demonstrated the value of an integrated organizational intervention involving redesign of the physical environment, introduction of a new information system, work process improvement, and extended organizational development intervention. The outcomes were extremely positive. The cost of improvement efforts was found to be recaptured within a short time, easily justifying the expenditures. One conclusion from the study is that integrated interventions are very powerful. Integrating improvement of the physical environment with organizational development and technological innovation greatly enhances the likelihood of achieving a successful intervention.

Integrating Health Behavior Theory and Design Elements in Serious Games.

Science.gov (United States)

Cheek, Colleen; Fleming, Theresa; Lucassen, Mathijs Fg; Bridgman, Heather; Stasiak, Karolina; Shepherd, Matthew; Orpin, Peter

2015-01-01

Internet interventions for improving health and well-being have the potential to reach many people and fill gaps in service provision. Serious gaming interfaces provide opportunities to optimize user adherence and impact. Health interventions based in theory and evidence and tailored to psychological constructs have been found to be more effective to promote behavior change. Defining the design elements which engage users and help them to meet their goals can contribute to better informed serious games. To elucidate design elements important in SPARX, a serious game for adolescents with depression, from a user-centered perspective. We proposed a model based on an established theory of health behavior change and practical features of serious game design to organize ideas and rationale. We analyzed data from 5 studies comprising a total of 22 focus groups and 66 semistructured interviews conducted with youth and families in New Zealand and Australia who had viewed or used SPARX. User perceptions of the game were applied to this framework. A coherent framework was established using the three constructs of self-determination theory (SDT), autonomy, competence, and relatedness, to organize user perceptions and design elements within four areas important in design: computer game, accessibility, working alliance, and learning in immersion. User perceptions mapped well to the framework, which may assist developers in understanding the context of user needs. By mapping these elements against the constructs of SDT, we were able to propose a sound theoretical base for the model. This study's method allowed for the articulation of design elements in a serious game from a user-centered perspective within a coherent overarching framework. The framework can be used to deliberately incorporate serious game design elements that support a user's sense of autonomy, competence, and relatedness, key constructs which have been found to mediate motivation at all stages of the change

The role of size constancy for the integration of local elements into a global shape

Directory of Open Access Journals (Sweden)

Johannes eRennig

2013-07-01

Full Text Available Visual perception depends on the visual context and is likely to be influenced by size constancy, which predicts a size and distance invariant perception of objects. However, size constancy can also result in optical illusions that allow the manipulation of the perceived size. We thus asked whether the integration of local elements into a global object can be influenced by manipulations of the visual context and size constancy? A set of stimuli was applied in healthy individuals that took advantage of the ‘Kanizsa’ illusion, in which three circles with open wedges oriented towards a center point are placed to form an illusionary perception of a triangle. In addition, a 3D-perspective view was implemented in which the global target (‘Kanizsa’ triangle was placed in combination with several distractor circles either in a close or a distant position. Subjects were engaged in a global recognition task on the location of the ‘Kanizsa’ triangle. Global recognition of ‘Kanizsa’ triangles improved with a decreasing length of the illusory contour. Interestingly, recognition of ‘Kanizsa’ triangles decreased when they were perceived as if they were located further away. We conclude that the integration of local elements into a global object is dependent on the visual context and dominated by size constancy.

Spectroscopic studies of the transplutonium elements

International Nuclear Information System (INIS)

Carnall, W.T.; Conway, J.G.

1983-01-01

The challenging opportunity to develop insights into both atomic structure and the effects of bonding in compounds makes the study of actinide spectroscopy a particularly fruitful and exciting area of scientific endeavor. It is also the interpretation of f-element spectra that has stimulated the development of the most sophisticated theoretical modeling attempted for any elements in the periodic table. The unique nature of the spectra and the wealth of fine detail revealed make possible sensitive tests of both physical models and the results of Hartree-Fock type ab initio calculations. This paper focuses on the unique character of heavy actinide spectroscopy. It discusses how it differs from that of the lighter member of the series and what are the special properties that are manifested. Following the introduction, the paper covers the following: (1) the role of systematic studies and the relationships of heavy-actinide spectroscopy to ongoing spectroscopic investigations of the lighter members of the series; (2) atomic (free-ion) spectra which covers the present status of spectroscopic studies with transplutonium elements, and future needs and directions in atomic spectroscopy; (3) the spectra of actinide compounds which covers the present status and future directions of spectroscopic studies with compounds of the transplutonium elements; and other spectroscopies. 1 figure, 2 tables

Elements of Contemporary Integrated Science Curriculum: Impacts ...

African Journals Online (AJOL)

This paper acknowledged the vital roles played by integration of ideas and established the progress brought about when science is taught as a unified whole through knowledge integration which birthed integrated science as a subject in Nigerian school curriculum. The efforts of interest groups at regional, national and ...

A boundary integral method for numerical computation of radar cross section of 3D targets using hybrid BEM/FEM with edge elements

Science.gov (United States)

Dodig, H.

2017-11-01

This contribution presents the boundary integral formulation for numerical computation of time-harmonic radar cross section for 3D targets. Method relies on hybrid edge element BEM/FEM to compute near field edge element coefficients that are associated with near electric and magnetic fields at the boundary of the computational domain. Special boundary integral formulation is presented that computes radar cross section directly from these edge element coefficients. Consequently, there is no need for near-to-far field transformation (NTFFT) which is common step in RCS computations. By the end of the paper it is demonstrated that the formulation yields accurate results for canonical models such as spheres, cubes, cones and pyramids. Method has demonstrated accuracy even in the case of dielectrically coated PEC sphere at interior resonance frequency which is common problem for computational electromagnetic codes.

ICESag37, a Novel Integrative and Conjugative Element Carrying Antimicrobial Resistance Genes and Potential Virulence Factors in Streptococcus agalactiae.

Science.gov (United States)

Zhou, Kaixin; Xie, Lianyan; Han, Lizhong; Guo, Xiaokui; Wang, Yong; Sun, Jingyong

2017-01-01

ICE Sag37 , a novel integrative and conjugative element carrying multidrug resistance and potential virulence factors, was characterized in a clinical isolate of Streptococcus agalactiae . Two clinical strains of S. agalactiae , Sag37 and Sag158, were isolated from blood samples of new-borns with bacteremia. Sag37 was highly resistant to erythromycin and tetracycline, and susceptible to levofloxacin and penicillin, while Sag158 was resistant to tetracycline and levofloxacin, and susceptible to erythromycin. Transfer experiments were performed and selection was carried out with suitable antibiotic concentrations. Through mating experiments, the erythromycin resistance gene was found to be transferable from Sag37 to Sag158. Sma I-PFGE revealed a new Sma I fragment, confirming the transfer of the fragment containing the erythromycin resistance gene. Whole genome sequencing and sequence analysis revealed a mobile element, ICE Sag37 , which was characterized using several molecular methods and in silico analyses. ICE Sag37 was excised to generate a covalent circular intermediate, which was transferable to S. agalactiae . Inverse PCR was performed to detect the circular form. A serine family integrase mediated its chromosomal integration into rumA , which is a known hotspot for the integration of streptococcal ICEs. The integration site was confirmed using PCR. ICE Sag37 carried genes for resistance to multiple antibiotics, including erythromycin [ erm(B) ], tetracycline [ tet(O) ], and aminoglycosides [ aadE, aphA , and ant(6) ]. Potential virulence factors, including a two-component signal transduction system ( nisK/nisR ), were also observed in ICE Sag37 . S1-PFGE analysis ruled out the existence of plasmids. ICE Sag37 is the first ICE Sa2603 family-like element identified in S. agalactiae carrying both resistance and potential virulence determinants. It might act as a vehicle for the dissemination of multidrug resistance and pathogenicity among S. agalactiae .

Integration of Solid-phase Extraction with Electrothermal Atomic Absorption Spectrometry for Determination of Trace Elements

OpenAIRE

NUKATSUKA, Isoshi; OHZEKI, Kunio

2006-01-01

An enrichment step in a sample treatment is essential for trace analysis to improve the sensitivity and to eliminate the matrix of the sample. Solid-phase extraction (SPE) is one of the widely used enrichment technique. Electrothermal atomic absorption spectrometry (ETAAS) is a well-established determination technique for trace elements. The integration of SPE with ETAAS leads to further improvement of sensitivity, an automation of the measurement and the economy in the sample size, amounts o...

In situ 3D nanoprinting of free-form coupling elements for hybrid photonic integration

Science.gov (United States)

Dietrich, P.-I.; Blaicher, M.; Reuter, I.; Billah, M.; Hoose, T.; Hofmann, A.; Caer, C.; Dangel, R.; Offrein, B.; Troppenz, U.; Moehrle, M.; Freude, W.; Koos, C.

2018-04-01

Hybrid photonic integration combines complementary advantages of different material platforms, offering superior performance and flexibility compared with monolithic approaches. This applies in particular to multi-chip concepts, where components can be individually optimized and tested. The assembly of such systems, however, requires expensive high-precision alignment and adaptation of optical mode profiles. We show that these challenges can be overcome by in situ printing of facet-attached beam-shaping elements. Our approach allows precise adaptation of vastly dissimilar mode profiles and permits alignment tolerances compatible with cost-efficient passive assembly techniques. We demonstrate a selection of beam-shaping elements at chip and fibre facets, achieving coupling efficiencies of up to 88% between edge-emitting lasers and single-mode fibres. We also realize printed free-form mirrors that simultaneously adapt beam shape and propagation direction, and we explore multi-lens systems for beam expansion. The concept paves the way to automated assembly of photonic multi-chip systems with unprecedented performance and versatility.

Numerical simulation of experimental data from planar SIS mixers with integrated tuning elements

International Nuclear Information System (INIS)

Mears, C.A.; Hu, Qing; Richards, P.L.

1988-08-01

We have used the full Tucker theory including the quantum susceptance to fit data from planar lithographed mm-wave mixers with bow tie antennas and integrated RF coupling elements. Essentially perfect fits to pumped IV curves have been obtained. The deduced imbedding admittances agree well with those independently calculated from the geometry of the antenna and matching structures. We find that the quantum susceptance is essential to the fit and thus to predictions of the mixer performance. For junctions with moderately sharp gap structures, the quantum susceptance is especially important in the production of steps with low and/or negative dynamic conductance. 15 refs., 4 figs

Elements for an integrated resource planning in the framework of river basins: a study for the Cuiaba River Basin; Elementos para um planejamento integrado de recursos no ambito de bacias hidrograficas: um estudo para a bacia do rio Cuiaba

Energy Technology Data Exchange (ETDEWEB)

Dorileo, Ivo Leandro; Bajay, Sergio Valdir [Universidade Estadual de Campinas (NIPE/UNICAMP), SP (Brazil). Nucleo Interdisciplinar de Planejamento Energetico. Dept. de Energia], e-mail: ildorileo@sigmanet.com.br, e-mail: bajay@fem.unicamp.br

2008-07-01

A new approach in energy planning in Brazil, IRP - Integrated Resources Planning for River Basins, gathers three main determinants of development: water, electricity and piped gas. This paper argues, briefly, the need of this planning, of indicative character, integrated with the River Basin Plans, and it presents a retrospective analysis concerning water, electricity and LPG demands of the economy sectors from Cuiaba River Basin region, priority elements to aid the prospective studies and to carry out process related to the IRP. (author)

Differing Perceptions Concerning Research Integrity Between Universities and Industry: A Qualitative Study.

Science.gov (United States)

Godecharle, Simon; Nemery, Benoit; Dierickx, Kris

2017-09-14

Despite the ever increasing collaboration between industry and universities, the previous empirical studies on research integrity and misconduct excluded participants of biomedical industry. Hence, there is a lack of empirical data on how research managers and biomedical researchers active in industry perceive the issues of research integrity and misconduct, and whether or not their perspectives differ from those of researchers and research managers active in universities. If various standards concerning research integrity and misconduct are upheld between industry and universities, this might undermine research collaborations. Therefore we performed a qualitative study by conducting 22 semi-structured interviews in order to investigate and compare the perspectives and attitudes concerning the issues of research integrity and misconduct of research managers and biomedical researchers active in industry and universities. Our study showed clear discrepancies between both groups. Diverse strategies in order to manage research misconduct and to stimulate research integrity were observed. Different definitions of research misconduct were given, indicating that similar actions are judged heterogeneously. There were also differences at an individual level, whether the interviewees were active in industry or universities. Overall, the management of research integrity proves to be a difficult exercise, due to many diverse perspectives on several essential elements connected to research integrity and misconduct. A management policy that is not in line with the vision of the biomedical researchers and research managers is at risk of being inefficient.

Trace element studies at University of Pittsburgh

International Nuclear Information System (INIS)

Cohen, B.L.; Chan, K.C.; Shabason, L.; Wedberg, G.; Rudolph, H.

1974-01-01

Seven areas of research are discussed. A method was developed for analyzing samples for their major constituent elements by irradiating with protons and detecting prompt gamma rays, mostly produced in (p,p'γ) reactions. Among other applications, the method was used to analyze air particulates for C, N, O, Al, Si, S, Co, and Fe. Trace element analysis by proton or alpha particle induced x-ray fluorescence was used on thin samples in a study of the variations of Pb, Br, Fe, and Zn in air particulates as a function of time. Among other applications this method was also used in studying trace elements in rainwater. An x-ray fluorescence method that is effective in the analysis of thick samples was developed. A method based on measuring energies of elastically scattered protons was developed for the analysis of light elements. The use of proton and neutron activation analyses, as well as methods for studying depth profiles for hydrogen and helium in materials are discussed

Development of finite element models for the study of ageing effects in CANDU 6 concrete containment buildings

Energy Technology Data Exchange (ETDEWEB)

Ding, Y.; Jaffer, S., E-mail: Yuqing.Ding@cnl.ca [Canadian Nuclear Laboratories, Chalk River, Ontario (Canada)

2016-06-15

In nuclear power plants (NPPs), concrete containment buildings (CCBs) provide the final physical barrier against the release of radioactive materials into the environment and protect the nuclear structures housed within the containment building. CCBs have to be maintained to ensure leak tightness and sound structural integrity for the safe operation throughout the life of NPPs. However, the integrity of CCBs may be affected by the ageing of its concrete, post-tensioning cables and reinforcing bars (rebars). Finite element models (FEMs) of CANDU 6 CCBs have been developed using 2 independent finite element programs for the study of the effect of ageing of CCBs. These FEMs have been validated using multiple-source data and have been used for preliminary analyses of the effect of thermal load and ageing degradation on the concrete structure. The modelling assumptions and simplifications, approach, and validation are discussed in this paper. The preliminary analyses for temperature effects and potential applications to the study of ageing degradation in CCBs using the FEMs are briefly introduced. (author)

Studies to single subassembly flow monitoring with a complete 7 element array under sodium

International Nuclear Information System (INIS)

Hess, B.; Ruppert, E.; Stehle, H.; Vinzens, K.

1975-01-01

A core restraint system in a fast reactor serves to limit fuel element movement leading to reactivity changes and misalignment of control rod drives and instrumentation. To guarantee proper control rod function the upper ring of the passive restraint system for the SNR-300 should keep subassembly displacement below 20 mm, whereas a free bowing up to 25 mm does not impair subassembly handling. With respect to single subassembly instrumentation the influences of subassembly displacement on temperature and flow monitoring were not exactly known. As part of the SNR-300 R and D programme a complete clamped array, consisting of 4 full size fuel elements and 3 blanket elements was tested for more than 4000 hours at 600 0 C in the AKB sodium loop at Interatom, Bensberg. The test was split into two phases and the total cluster was prestrained in the second phase to simulate 15 mm subassembly displacement at the level of the upper pads. Although this test was mainly considered as an endurance test to demonstrate the integrity of prestrained core elements, effort were made to study the feasibility of single subassembly flow monitoring with this full size model of a core section. (Auth.)

Building integrated photovoltaic; Photovaltaique integre aux batiments

Energy Technology Data Exchange (ETDEWEB)

NONE

2004-01-01

Durable, modular and flexible in use, as demonstrated by the different case studies in this publication, photovoltaic can replace diverse building elements, from glass facades to weather proof roofs. This leaflet towards architects describes aesthetic, technical, economic and environmental interest of building integrated photovoltaic. (author)

Quality Assurance of Cancer Study Common Data Elements Using A Post-Coordination Approach.

Science.gov (United States)

Jiang, Guoqian; Solbrig, Harold R; Prud'hommeaux, Eric; Tao, Cui; Weng, Chunhua; Chute, Christopher G

2015-01-01

Domain-specific common data elements (CDEs) are emerging as an effective approach to standards-based clinical research data storage and retrieval. A limiting factor, however, is the lack of robust automated quality assurance (QA) tools for the CDEs in clinical study domains. The objectives of the present study are to prototype and evaluate a QA tool for the study of cancer CDEs using a post-coordination approach. The study starts by integrating the NCI caDSR CDEs and The Cancer Genome Atlas (TCGA) data dictionaries in a single Resource Description Framework (RDF) data store. We designed a compositional expression pattern based on the Data Element Concept model structure informed by ISO/IEC 11179, and developed a transformation tool that converts the pattern-based compositional expressions into the Web Ontology Language (OWL) syntax. Invoking reasoning and explanation services, we tested the system utilizing the CDEs extracted from two TCGA clinical cancer study domains. The system could automatically identify duplicate CDEs, and detect CDE modeling errors. In conclusion, compositional expressions not only enable reuse of existing ontology codes to define new domain concepts, but also provide an automated mechanism for QA of terminological annotations for CDEs.

Inclusion of Moloney murine leukemia virus elements upstream of the transgene cassette in an E1-deleted adenovirus leads to an unusual genomic integration in epithelial cells

International Nuclear Information System (INIS)

Zheng Changyu; O'Connell, Brian C.; Baum, Bruce J.

2003-01-01

Classically, the 5' and 3' long terminal repeats (LTRs) are considered necessary but not sufficient for retroviral integration. Recently, we reported that inclusion of these and additional elements from Moloney murine leukemia virus (MoMLV) facilitated transgene integration, without retroviral integrase, when placed in an adenoviral context (AdLTR-luc vector) (Nat. Biotech. 18 (2000), 176; Biochem. Biophys. Res. Commun. 300 (2003), 115). To help understand this nonhomologous DNA recombination event, we constructed another vector, AdELP-luc, with 2.7 kb of MoMLV elements identically placed into an E1-deleted adenovirus type 5 backbone upstream of a luciferase cDNA reporter gene. Unlike AdLTR-luc, no MoMLV elements were placed downstream of the expression cassette. AdELP-luc readily infected epithelial cells in vitro. Southern hybridizations with DNA from cloned cells showed that disruption of the MoMLV sequences occurred. One cell clone, grown in vitro without any special selection medium for 9 months, exhibited stable vector integration and luciferase activity. Importantly, both Southern hybridization and FISH analyses showed that in addition to the MoMLV elements and expression cassette, substantial adenoviral sequence downstream of the luciferase cDNA was genomically integrated. These results suggest that the 2.7 kb of MoMLV sequence included in AdELP-luc have cis-acting functions and mediates an unusual integration event

Testing an integrated behavioural and biomedical model of disability in N-of-1 studies with chronic pain.

Science.gov (United States)

Quinn, Francis; Johnston, Marie; Johnston, Derek W

2013-01-01

Previous research has supported an integrated biomedical and behavioural model explaining activity limitations. However, further tests of this model are required at the within-person level, because while it proposes that the constructs are related within individuals, it has primarily been tested between individuals in large group studies. We aimed to test the integrated model at the within-person level. Six correlational N-of-1 studies in participants with arthritis, chronic pain and walking limitations were carried out. Daily measures of theoretical constructs were collected using a hand-held computer (PDA), the activity was assessed by self-report and accelerometer and the data were analysed using time-series analysis. The biomedical model was not supported as pain impairment did not predict activity, so the integrated model was supported partially. Impairment predicted intention to move around, while perceived behavioural control (PBC) and intention predicted activity. PBC did not predict activity limitation in the expected direction. The integrated model of disability was partially supported within individuals, especially the behavioural elements. However, results suggest that different elements of the model may drive activity (limitations) for different individuals. The integrated model provides a useful framework for understanding disability and suggests interventions, and the utility of N-of-1 methodology for testing theory is illustrated.

Enhanced depth-of-field of an integral imaging microscope using a bifocal holographic optical element-micro lens array.

Science.gov (United States)

Kwon, Ki-Chul; Lim, Young-Tae; Shin, Chang-Won; Erdenebat, Munkh-Uchral; Hwang, Jae-Moon; Kim, Nam

2017-08-15

We propose and implement an integral imaging microscope with extended depth-of-field (DoF) using a bifocal holographic micro lens array (MLA). The properties of the two MLAs are switched via peristrophic multiplexing, where different properties of the MLA are recorded onto the single holographic optical element (HOE). The recorded MLA properties are perpendicular to each other: after the first mode is recorded, the HOE is rotated by 90° clockwise, and the second mode is recorded. The experimental results confirm that the DoF of the integral imaging microscopy system is extended successfully by using the bifocal MLA.

Standard integral table algebras generated by non-real element of small degree

CERN Document Server

Muzychuk, Mikhail

2002-01-01

This book is addressed to the researchers working in the theory of table algebras and association schemes. This area of algebraic combinatorics has been rapidly developed during the last decade. The volume contains further developments in the theory of table algebras. It collects several papers which deal with a classification problem for standard integral table algebras (SITA). More precisely, we consider SITA with a faithful non-real element of small degree. It turns out that such SITA with some extra conditions may be classified. This leads to new infinite series of SITA which has interesting properties. The last section of the book uses a part of obtained results in the classification of association schemes. This volume summarizes the research which was done at Bar-Ilan University in the academic year 1998/99.

Detecting failed elements on phased array ultrasound transducers using the Edinburgh Pipe Phantom

Science.gov (United States)

Inglis, Scott; Pye, Stephen D

2016-01-01

Aims Imaging faults with ultrasound transducers are common. Failed elements on linear and curvilinear array transducers can usually be detected with a simple image uniformity or ‘paperclip’ test. However, this method is less effective for phased array transducers, commonly used in cardiac imaging. The aim of this study was to assess whether the presence of failed elements could be detected through measurement of the resolution integral (R) using the Edinburgh Pipe Phantom. Methods A 128-element paediatric phased array transducer was studied. Failed elements were simulated using layered polyvinyl chloride (PVC) tape as an attenuator and measurements of resolution integral were carried out for several widths of attenuator. Results All widths of attenuator greater than 0.5 mm resulted in a significant reduction in resolution integral and low contrast penetration measurements compared to baseline (p tests to detect failed elements on phased array transducers. Particularly encouraging is the result for low contrast penetration as this is a quick and simple measurement to make and can be performed with many different test objects, thus enabling ‘in-the-field’ checks. PMID:27482276

Study on system integration of robots operated in nuclear fusion facility and nuclear power plant facilities

International Nuclear Information System (INIS)

Oka, Kiyoshi

2004-07-01

A present robot is required to apply to many fields such as amusement, welfare and protection against disasters. The are however only limited numbers of the robots, which can work under the actual conditions as a robot system. It is caused by the following reasons: (1) the robot system cannot be realized by the only collection of the elemental technologies, (2) the performance of the robot is determined by that of the integrated system composed of the complicated elements with many functions, and (3) the respective elements have to be optimized in the integrated robot system with a well balance among them, through their examination, adjustment and improvement. Therefore, the system integration of the robot composed of a large number of elements is the most critical issue to realize the robot system for actual use. In the present paper, I describe the necessary approaches and elemental technologies to solve the issues on the system integration of the typical robot systems for maintenance in the nuclear fusion facility and rescue in the accident of the nuclear power plant facilities. These robots work under the intense radiation condition and restricted space in place of human. In particular, I propose a new approach to realize the system integration of the robot for actual use from the viewpoints of not only the environment and working conditions but also the restructure and optimization of the required elemental technologies with a well balance in the robot system. Based on the above approach, I have a contribution to realize the robot systems working under the actual conditions for maintenance in the nuclear fusion facility and rescue in the accident of the nuclear power plant facilities. (author)

Criteria for the selection of graphites for HTR integral block fuel elements

International Nuclear Information System (INIS)

Knowles, A.N.

1980-01-01

This paper is concerned with the special requirements for integral block fuel elements of the type first used in the Fort St. Vrain reactor. The main idea of these elements is that the carrier block and separate graphite clad fuel pins are combined into a single monolith. This combination leads to lower fabrication costs and some improvement in the thermal performance (lower temperature difference between fuel and the surface of heat transfer into the coolant). The advent of block fuel for HTRs of the Fort St. Vrain type has placed a fresh emphasis on the selection of graphite for block manufacture in respect of physical properties. This is because the temperature distributions typical of such fuelled blocks lead to shutdown stresses close to the maximum the graphite can sustain without damage. Figures presented in this paper suggest that the physical properties of the graphite can play a relatively large part in reducing such stress levels and that guidance on the key requirements for suitable specifications is therefore particularly needed by the manufacturers of fuel block graphites. While graphites for fuel blocks have this special need for combinations of physical properties which lead to low thermal and shrinkage stresses, the other characteristics must also receive attention. A low graphite cost combined with good homogeneity in the brick, so that waste minimized, are still necessary, while isotropy is also very important

A Novel Polygonal Finite Element Method: Virtual Node Method

Science.gov (United States)

Tang, X. H.; Zheng, C.; Zhang, J. H.

2010-05-01

Polygonal finite element method (PFEM), which can construct shape functions on polygonal elements, provides greater flexibility in mesh generation. However, the non-polynomial form of traditional PFEM, such as Wachspress method and Mean Value method, leads to inexact numerical integration. Since the integration technique for non-polynomial functions is immature. To overcome this shortcoming, a great number of integration points have to be used to obtain sufficiently exact results, which increases computational cost. In this paper, a novel polygonal finite element method is proposed and called as virtual node method (VNM). The features of present method can be list as: (1) It is a PFEM with polynomial form. Thereby, Hammer integral and Gauss integral can be naturally used to obtain exact numerical integration; (2) Shape functions of VNM satisfy all the requirements of finite element method. To test the performance of VNM, intensive numerical tests are carried out. It found that, in standard patch test, VNM can achieve significantly better results than Wachspress method and Mean Value method. Moreover, it is observed that VNM can achieve better results than triangular 3-node elements in the accuracy test.

Numerical Study on Several Stabilized Finite Element Methods for the Steady Incompressible Flow Problem with Damping

Directory of Open Access Journals (Sweden)

Jilian Wu

2013-01-01

Full Text Available We discuss several stabilized finite element methods, which are penalty, regular, multiscale enrichment, and local Gauss integration method, for the steady incompressible flow problem with damping based on the lowest equal-order finite element space pair. Then we give the numerical comparisons between them in three numerical examples which show that the local Gauss integration method has good stability, efficiency, and accuracy properties and it is better than the others for the steady incompressible flow problem with damping on the whole. However, to our surprise, the regular method spends less CPU-time and has better accuracy properties by using Crout solver.

Integrated chemical sensor array platform based on a light emitting diode, xerogel-derived sensor elements, and high-speed pin printing

International Nuclear Information System (INIS)

Cho, Eun Jeong; Bright, Frank V.

2002-01-01

We report a new, solid-state, integrated optical array sensor platform. By using pin printing technology in concert with sol-gel-processing methods, we form discrete xerogel-based microsensor elements that are on the order of 100 μm in diameter and 1 μm thick directly on the face of a light emitting diode (LED). The LED serves as the light source to excite chemically responsive luminophores sequestered within the doped xerogel microsensors and the analyte-dependent emission from within the doped xerogel is detected with a charge coupled device (CCD). We overcome the problem of background illumination from the LED reaching the CCD and the associated biasing that results by coating the LED first with a thin layer of blue paint. The thin paint layer serves as an optical filter, knocking out the LEDs red-edge spectral tail. The problem of the spatially-dependent fluence across the LED face is solved entirely by performing ratiometric measurements. We illustrate the performance of the new sensor scheme by forming an array of 100 discrete O 2 -responsive sensing elements on the face of a single LED. The combination of pin printing with an integrated sensor and light source platform results in a rapid method of forming (∼1 s per sensor element) reusable sensor arrays. The entire sensor array can be calibrated using just one sensor element. Array-to-array reproducibly is <8%. Arrays can be formed using single or multiple pins with indistinguishable analytical performance

Yeast cytochrome c integrated with electronic elements: a nanoscopic and spectroscopic study down to single-molecule level

International Nuclear Information System (INIS)

Delfino, I; Bonanni, B; Andolfi, L; Baldacchini, C; Bizzarri, A R; Cannistraro, S

2007-01-01

Various aspects of redox protein integration with nano-electronic elements are addressed by a multi-technique investigation of different yeast cytochrome c (YCC)-based hybrid systems. Three different immobilization strategies on gold via organic linkers are explored, involving either covalent bonding or electrostatic interaction. Specifically, Au surfaces are chemically modified by self-assembled monolayers (SAMs) exposing thiol-reactive groups, or by acid-oxidized single-wall carbon nanotubes (SWNTs). Atomic force microscopy and scanning tunnelling microscopy are employed to characterize the morphology and the electronic properties of single YCC molecules adsorbed on the modified gold surfaces. In each hybrid system, the protein molecules are stably assembled, in a native configuration. A standing-up arrangement of YCC on SAMs is suggested, together with an enhancement of the molecular conduction, as compared to YCC directly assembled on gold. The electrostatic interaction with functionalized SWNTs allows several YCC adsorption geometries, with a preferential high-spin haem configuration, as outlined by Raman spectroscopy. Moreover, the conduction properties of YCC, explored in different YCC nanojunctions by conductive atomic force microscopy, indicate the effectiveness of electrical conduction through the molecule and its dependence on the electrode material. The joint employment of several techniques confirms the key role of a well-designed immobilization strategy, for optimizing biorecognition capabilities and electrical coupling with conductive substrates at the single-molecule level, as a starting point for advanced applications in nano-biotechnology

Process development for elemental recovery from PGM tailings by thermochemical treatment: Preliminary major element extraction studies using ammonium sulphate as extracting agent.

Science.gov (United States)

Mohamed, Sameera; van der Merwe, Elizabet M; Altermann, Wladyslaw; Doucet, Frédéric J

2016-04-01

Mine tailings can represent untapped secondary resources of non-ferrous, ferrous, precious, rare and trace metals. Continuous research is conducted to identify opportunities for the utilisation of these materials. This preliminary study investigated the possibility of extracting major elements from South African tailings associated with the mining of Platinum Group Metals (PGM) at the Two Rivers mine operations. These PGM tailings typically contain four major elements (11% Al2O3; 12% MgO; 22% Fe2O3; 34% Cr2O3), with lesser amounts of SiO2 (18%) and CaO (2%). Extraction was achieved via thermochemical treatment followed by aqueous dissolution, as an alternative to conventional hydrometallurgical processes. The thermochemical treatment step used ammonium sulphate, a widely available, low-cost, recyclable chemical agent. Quantification of the efficiency of the thermochemical process required the development and optimisation of the dissolution technique. Dissolution in water promoted the formation of secondary iron precipitates, which could be prevented by leaching thermochemically-treated tailings in 0.6M HNO3 solution. The best extraction efficiencies were achieved for aluminium (ca. 60%) and calcium (ca. 80%). 35% iron and 32% silicon were also extracted, alongside chromium (27%) and magnesium (25%). Thermochemical treatment using ammonium sulphate may therefore represent a promising technology for extracting valuable elements from PGM tailings, which could be subsequently converted to value-added products. However, it is not element-selective, and major elements were found to compete with the reagent to form water-soluble sulphate-metal species. Further development of this integrated process, which aims at achieving the full potential of utilisation of PGM tailings, is currently underway. Copyright © 2016 Elsevier Ltd. All rights reserved.

Dielectric response of arbitrary-shaped clusters studied by the finite element method

Czech Academy of Sciences Publication Activity Database

Rychetský, Ivan; Klíč, Antonín

2012-01-01

Roč. 427, č. 1 (2012), s. 143-147 ISSN 0015-0193 R&D Projects: GA ČR GA202/09/0430 Institutional research plan: CEZ:AV0Z10100520 Keywords : effective permittivity * two-component composite * integral representation * finite element analysis Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 0.415, year: 2012

Limitless Analytic Elements

Science.gov (United States)

Strack, O. D. L.

2018-02-01

We present equations for new limitless analytic line elements. These elements possess a virtually unlimited number of degrees of freedom. We apply these new limitless analytic elements to head-specified boundaries and to problems with inhomogeneities in hydraulic conductivity. Applications of these new analytic elements to practical problems involving head-specified boundaries require the solution of a very large number of equations. To make the new elements useful in practice, an efficient iterative scheme is required. We present an improved version of the scheme presented by Bandilla et al. (2007), based on the application of Cauchy integrals. The limitless analytic elements are useful when modeling strings of elements, rivers for example, where local conditions are difficult to model, e.g., when a well is close to a river. The solution of such problems is facilitated by increasing the order of the elements to obtain a good solution. This makes it unnecessary to resort to dividing the element in question into many smaller elements to obtain a satisfactory solution.

Study on the influence of finite element formulation and equation of motion solution scheme on FEM analysis results based on the asymmetrically loaded plate problem

Directory of Open Access Journals (Sweden)

Marcin Krzeszowiec

2015-03-01

Full Text Available Computer simulations of physical phenomena are at the moment common both in science and industry. The possibility of finding approximate solutions for complicated systems of differential equations, mathematically describing issues in the fields of mechanics, physics or chemistry, allows for shorten design and research time, often significantly reducing the need for expensive experimental studies or costly production of prototypes. However, the mentioned prevalence of these methods, particularly the Finite Element Method, resulted in analysis outcomes to be often in advance regarded as accurate ones. The purpose of the article is to showcase, on a simple stress analysis problem, how parameters such as the density of the finite element mesh, finite element formulation or integration scheme significantly influence on the simulation results and how easy it is to end up with the results that do not hold any physical sense, despite the fact that all the basic assumptions of correct analysis (suitable boundary conditions, total system energy stored etc. have been met. The results of this study can serve as a warning against premature conclusion drawing from calculations carried out by means of FEM simulation.[b]Keywords[/b]: computational mechanics, finite element method, shell elements, numerical integration

3-D Imaging Using Row–Column-Addressed Arrays With Integrated Apodization. Part I: Apodization Design and Line Element Beamforming

DEFF Research Database (Denmark)

Rasmussen, Morten Fischer; Christiansen, Thomas Lehrmann; Thomsen, Erik Vilain

2015-01-01

-integrated apodization increased the apparent diameter of the vessel from 2.0 mm to 2.4 mm, corresponding to an increase from 67% to 80% of the true vessel diameter. The line element beamforming approach is shown to be essential for achieving correct time-of-flight calculations, and hence avoid geometrical distortions...

An improved algorithm for the polycrystal viscoplastic self-consistent model and its integration with implicit finite element schemes

International Nuclear Information System (INIS)

Galán, J; Verleysen, P; Lebensohn, R A

2014-01-01

A new algorithm for the solution of the deformation of a polycrystalline material using a self-consistent scheme, and its integration as part of the finite element software Abaqus/Standard are presented. The method is based on the original VPSC formulation by Lebensohn and Tomé and its integration with Abaqus/Standard by Segurado et al. The new algorithm has been implemented as a set of Fortran 90 modules, to be used either from a standalone program or from Abaqus subroutines. The new implementation yields the same results as VPSC7, but with a significantly better performance, especially when used in multicore computers. (paper)

Is emergency management an integrated element of business continuity management? A case study with security professionals in Western Australia.

Science.gov (United States)

Frohde, Kenny; Brooks, David J

Emergency management (EM) and business continuity management (BCM) frameworks incorporate various strategic and operational measures. Defined within a number of national and international standards and guidelines, such concepts may be integrated within one another to provide increased resilience to disruptive events. Nevertheless, there is a degree of dispute regarding concept integration among security and EM professionals and bodies of knowledge. In line with cognitive psychology exemplar-based concepts, such disputes may be associated with a lack of precision in communality in the approach to EM and BCM. This paper presents a two-stage study, where stage 1 critiqued national and international literature and stage 2 applied semi-structured interviews with security managers in Western Australia. Findings indicate the existence of contradictory views on EM and its integration within BCM. As such, this study concludes that EM is considered a vital component of BCM by the majority of security managers. However, there is broader dispute regarding its degree of integration. Understanding the underpinnings of such disputes will aid in raising the standards and application of professionalism within security, EM and BCM domains, supporting clarification and definition of professional boundaries.

Study of transfer of minor elements during ironmaking by neutron activation analysis

International Nuclear Information System (INIS)

Ene, A.; Pantelica, A.

2010-01-01

In this work instrumental neutron activation analysis (INAA) was applied to investigate a total of 30 samples of metallurgical raw materials (sinter, pellets, coke) and related finished products (pig iron. slag, blast-furnace flue dust) sampled from the same blast furnace discharge in the iron-making process in the Integrated Iron and Steel Works of Galati (Romania). The transfer efficiencies of minor elements As, Cu, K, Na, V and W from raw materials - iron-bearing components (sinter, pellets) and coke - to pig iron and their losses in slag and flue dust have been determined and a discussion of the behaviour of each element during the blast furnace process was done. (orig.)

Endogenous viral elements in animal genomes.

Directory of Open Access Journals (Sweden)

Aris Katzourakis

2010-11-01

Full Text Available Integration into the nuclear genome of germ line cells can lead to vertical inheritance of retroviral genes as host alleles. For other viruses, germ line integration has only rarely been documented. Nonetheless, we identified endogenous viral elements (EVEs derived from ten non-retroviral families by systematic in silico screening of animal genomes, including the first endogenous representatives of double-stranded RNA, reverse-transcribing DNA, and segmented RNA viruses, and the first endogenous DNA viruses in mammalian genomes. Phylogenetic and genomic analysis of EVEs across multiple host species revealed novel information about the origin and evolution of diverse virus groups. Furthermore, several of the elements identified here encode intact open reading frames or are expressed as mRNA. For one element in the primate lineage, we provide statistically robust evidence for exaptation. Our findings establish that genetic material derived from all known viral genome types and replication strategies can enter the animal germ line, greatly broadening the scope of paleovirological studies and indicating a more significant evolutionary role for gene flow from virus to animal genomes than has previously been recognized.

Speciation of trace elements in the environmental studies

International Nuclear Information System (INIS)

Reddy, A.V.R.

2012-01-01

Elements present at trace levels, often referred as trace elements, play an important role in the environment and in the functioning of life on our planet. Trace elements in environment present as free metal ions or incorporated into colloids or attached to particulate matter or exist in different physical and chemical forms. It is well established that some elements are highly toxic and some are essential, but can become toxic at higher doses. It is also now known that the forms of elements (speciation) and their amounts are more important than the chemical dose of the elements as their interaction depends on different species. For example, Cr(VI) ions are considered far more toxic than Cr(III), whereas As(III) is more toxic than As(V). Similarly, in the case of mercury, both methylmercury and inorganic mercury are toxic but they show different levels of toxicity. Thus the adverse effects depend on the nature of species of the elements and therefore speciation studies are of paramount importance in many areas like toxicology, environmental chemistry and geochemisty. In view of this, speciation studies is a challenge to analytical chemists as the measurement methodologies have to be carefully developed, validated and applied. The grand challenge is to obtain quality data ensuring traceability, as the data obtained will be used in modeling for predicting the environmental impacts. In this talk importance of speciation and challenges to environmental analytical chemists will be discussed along with the following three speciation studies on Cr, U and Hg which were carried out in our laboratories

FDTD-SPICE for Characterizing Metamaterials Integrated with Electronic Circuits

Directory of Open Access Journals (Sweden)

Zhengwei Hao

2012-01-01

Full Text Available A powerful time-domain FDTD-SPICE simulator is implemented and applied to the broadband analysis of metamaterials integrated with active and tunable circuit elements. First, the FDTD-SPICE modeling theory is studied and details of interprocess communication and hybridization of the two techniques are discussed. To verify the model, some simple cases are simulated with results in both time domain and frequency domain. Then, simulation of a metamaterial structure constructed from periodic resonant loops integrated with lumped capacitor elements is studied, which demonstrates tuning resonance frequency of medium by changing the capacitance of the integrated elements. To increase the bandwidth of the metamaterial, non-Foster transistor configurations are integrated with the loops and FDTD-SPICE is applied to successfully bridge the physics of electromagnetic and circuit topologies and to model the whole composite structure. Our model is also applied to the design and simulation of a metasurface integrated with nonlinear varactors featuring tunable reflection phase characteristic.

Transuranic element behavior in soils and plants

International Nuclear Information System (INIS)

Wildung, R.E.

1982-01-01

The principal objective of this study is to define soil, plant, and foliar interaction processes that influence the availability of transuranic elements to agricultural plants and animals as a basis for improved modeling and dose-assessment. Major areas of emphasis are: (1) soil and soil-microbial processes that influence the concentration and form of transuranic elements in soil solutions and availability to the plant root with time; (2) deposition and plant interception of airborne submicronic particles containing transuranic elements and their susceptibility to leaching; (3) plant processes that influence transport across plant root membrane and foliar surfaces, as well as the form and sites of deposition of transuranic elements in mature plants; and (4) the integrated effect of soil and plant processes on transuranic element availability to, and form in, animals that consume plants

Finite Element Method Application in Areal Rainfall Estimation Case Study; Mashhad Plain Basin

Directory of Open Access Journals (Sweden)

M. Irani

2016-10-01

Full Text Available Introduction: The hydrological models are very important tools for planning and management of water resources. These models can be used for identifying basin and nature problems and choosing various managements. Precipitation is based on these models. Calculations of rainfall would be affected by displacement and region factor such as topography, etc. Estimating areal rainfall is one of the basic needs in meteorological, water resources and others studies. There are various methods for the estimation of rainfall, which can be evaluated by using statistical data and mathematical terms. In hydrological analysis, areal rainfall is so important because of displacement of precipitation. Estimating areal rainfall is divided to three methods: 1- graphical. 2-topographical. 3-numerical. This paper represented calculating mean precipitation (daily, monthly and annual using Galerkin’s method (numerical method and it was compared with other methods such as kriging, IDW, Thiessen and arithmetic mean. In this study, there were 42 actual gauges and thirteen dummies in Mashhad plain basin which is calculated by Galerkin’s method. The method included the use of interpolation functions, allowing an accurate representation of shape and relief of catchment with numerical integration performed by Gaussian quadrature and represented the allocation of weights to stations. Materials and Methods:The estimation of areal rainfall (daily, monthly,… is the basic need for meteorological project. In this field ,there are various methods that one of them is finite element method. Present study aimed to estimate areal rainfall with a 16-year period (1997-2012 by using Galerkin method ( finite element in Mashhad plain basin for 42 station. Therefore, it was compared with other usual methods such as arithmetic mean, Thiessen, Kriging and IDW. The analysis of Thiessen, Kriging and IDW were in ArcGIS10.0 software environment and finite element analysis did by using of Matlab

Potential for thermochemical conversion of biomass residues from the integrated sugar-ethanol process - Fate of ash and ash-forming elements.

Science.gov (United States)

Dirbeba, Meheretu Jaleta; Brink, Anders; DeMartini, Nikolai; Zevenhoven, Maria; Hupa, Mikko

2017-06-01

In this work, potential for thermochemical conversion of biomass residues from an integrated sugar-ethanol process and the fate of ash and ash-forming elements in the process are presented. Ash, ash-forming elements, and energy flows in the process were determined using mass balances and analyses of eight different biomass samples for ash contents, elemental compositions, and heating values. The results show that the ash content increases from the sugarcane to the final residue, vinasse. The cane straw, which is left in the field, contains one-third of the energy and 25% of the K and Cl while the vinasse contains 2% of the energy and 40% of the K and Cl in the cane. K and Cl in biomass fuels cause corrosion and fouling problems in boilers and gasifiers. Over 85% of these elements in the straw are water soluble indicating that water leaching would improve it for utilization in thermochemical conversion. Copyright © 2017 Elsevier Ltd. All rights reserved.

Model studying the processes arising during fuel element overheating

International Nuclear Information System (INIS)

Usynin, G.B.; Anoshkin, Yu.I.; Vlasichev, G.N.; Galitskikh, Yu.N.; Semenychev, M.A.

1986-01-01

A calculational technique for studying heating and melting of fuel elements in the BN type reactors during an accident with heat release failure and a simulator with central rod heater intended for out-of-pile experiments is developed. The time rangeof the characteristic melting steps for the most thermally stressed fuel element at the reactor nominal power is calculated. The experimental study of the fuel element melting using a simulator with a tungsten heater has proved that the technique for the simultor and fuel can melting, respectively, is correct. The developed technique is used for determining the geometrical values and operational conditions for experiments with simulators, when quantitative and qualitative characteristics of the process under study are rather close to those natural for fuel elements

Design study on steam generator integration into the VVER reactor pressure vessel

International Nuclear Information System (INIS)

Hort, J.; Matal, O.

2004-01-01

The primary circuit of VVER (PWR) units is arranged into loops where the heat generated by the reactor is removed by means of main circulating pumps, loop pipelines and steam generators, all located outside the reactor pressure vessel. If the primary circuit and reactor core were integrated into one pressure vessel, as proposed, e.g., within the IRIS project (WEC), a LOCA situation would be limited by the reactor pressure vessel integrity only. The aim of this design study regarding the integration of the steam generator into the reactor pressure vessel was to identify the feasibility limits and some issues. Fuel elements and the reactor pressure vessel as used in the Temelin NPP were considered for the analysis. From among the variants analyzed, the variant with steam generators located above the core and vertically oriented circulating pumps at the RPV lower bottom seems to be very promising for future applications

The extended regulatory networks of SXT/R391 integrative and conjugative elements and IncA/C conjugative plasmids.

Science.gov (United States)

Poulin-Laprade, Dominic; Carraro, Nicolas; Burrus, Vincent

2015-01-01

Nowadays, healthcare systems are challenged by a major worldwide drug resistance crisis caused by the massive and rapid dissemination of antibiotic resistance genes and associated emergence of multidrug resistant pathogenic bacteria, in both clinical and environmental settings. Conjugation is the main driving force of gene transfer among microorganisms. This mechanism of horizontal gene transfer mediates the translocation of large DNA fragments between two bacterial cells in direct contact. Integrative and conjugative elements (ICEs) of the SXT/R391 family (SRIs) and IncA/C conjugative plasmids (ACPs) are responsible for the dissemination of a broad spectrum of antibiotic resistance genes among diverse species of Enterobacteriaceae and Vibrionaceae. The biology, diversity, prevalence and distribution of these two families of conjugative elements have been the subject of extensive studies for the past 15 years. Recently, the transcriptional regulators that govern their dissemination through the expression of ICE- or plasmid-encoded transfer genes have been described. Unrelated repressors control the activation of conjugation by preventing the expression of two related master activator complexes in both types of elements, i.e., SetCD in SXT/R391 ICEs and AcaCD in IncA/C plasmids. Finally, in addition to activating ICE- or plasmid-borne genes, these master activators have been shown to specifically activate phylogenetically unrelated mobilizable genomic islands (MGIs) that also disseminate antibiotic resistance genes and other adaptive traits among a plethora of pathogens such as Vibrio cholerae and Salmonella enterica.

The extended regulatory networks of SXT/R391 integrative and conjugative elements and IncA/C conjugative plasmids.

Directory of Open Access Journals (Sweden)

Dominic ePoulin-Laprade

2015-08-01

Full Text Available Nowadays, healthcare systems are challenged by a major worldwide drug resistance crisis caused by the massive and rapid dissemination of antibiotic resistance genes and associated emergence of multidrug resistant pathogenic bacteria, in both clinical and environmental settings. Conjugation is the main driving force of gene transfer among microorganisms. This mechanism of horizontal gene transfer mediates the translocation of large DNA fragments between two bacterial cells in direct contact. Integrative and conjugative elements (ICEs of the SXT/R391 family (SRIs and IncA/C conjugative plasmids (ACPs are responsible for the dissemination of a broad spectrum of antibiotic resistance genes among diverse species of Enterobacteriaceae and Vibrionaceae. The biology, diversity, prevalence and distribution of these two families of conjugative elements have been the subject of extensive studies for the past 15 years. Recently, the transcriptional regulators that govern their dissemination through the expression of ICE- or plasmid-encoded transfer genes have been described. Unrelated repressors control the activation of conjugation by preventing the expression of two related master activator complexes in both types of elements, i.e. SetCD in SXT/R391 ICEs and AcaCD in IncA/C plasmids. Finally, in addition to activating ICE- or plasmid-borne genes, these master activators have been shown to specifically activate phylogenetically unrelated mobilizable genomic islands (MGIs that also disseminate antibiotic resistance genes and other adaptive traits among a plethora of pathogens such as Vibrio cholerae and Salmonella enterica.

SXT/R391 ICE elements encode a novel ‘trap-door’ strategy for mobile element escape

Directory of Open Access Journals (Sweden)

Michael P Ryan

2016-05-01

Full Text Available Integrative Conjugative Elements (ICEs are a class of bacterial mobile elements that have the ability to mediate their own integration, excision and transfer from one host genome to another by a mechanism of site-specific recombination, self-circularisation and conjugative transfer. Members of the SXT/R391 ICE family of enterobacterial mobile genetic elements display an unusual UV-inducible sensitisation function which results in stress induced killing of bacterial cells harbouring the ICE. This sensitisation has been shown to be associated with a stress induced overexpression of a mobile element encoded conjugative transfer gene, orf43, a traV homolog. This results in cell lysis and release of a circular form of the ICE. Induction of this novel system may allow transfer of an ICE, enhancing its survival potential under conditions not conducive to conjugative transfer.

Grassmann integral and Balian–Brézin decomposition in Hartree–Fock–Bogoliubov matrix elements

Energy Technology Data Exchange (ETDEWEB)

Mizusaki, Takahiro, E-mail: mizusaki@isc.senshu-u.ac.jp [Institute of Natural Sciences, Senshu University, 3-8-1 Kanda-Jinbocho, Chiyoda-ku, Tokyo 101-8425 (Japan); Oi, Makito [Institute of Natural Sciences, Senshu University, 3-8-1 Kanda-Jinbocho, Chiyoda-ku, Tokyo 101-8425 (Japan); Chen, Fang-Qi [Department of Physics and Astronomy, Shanghai Jiao Tong University, Shanghai 200240 (China); Sun, Yang [Department of Physics and Astronomy, Shanghai Jiao Tong University, Shanghai 200240 (China); Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou 730000 (China)

2013-08-09

We present a new formula to calculate matrix elements of a general unitary operator with respect to Hartree–Fock–Bogoliubov states allowing multiple quasi-particle excitations. The Balian–Brézin decomposition of the unitary operator [R. Balian, E. Brézin, Il Nuovo Cimento B 64 (1969) 37] is employed in the derivation. We found that this decomposition is extremely suitable for an application of Fermion coherent state and Grassmann integrals in the quasi-particle basis. The resultant formula is compactly expressed in terms of the Pfaffian, and shows the similar bipartite structure to the formula that we have previously derived in the bare-particles basis [T. Mizusaki, M. Oi, Phys. Lett. B 715 (2012) 219].

The accuracy of the Gaussian-and-finite-element-Coulomb (GFC) method for the calculation of Coulomb integrals.

Science.gov (United States)

Przybytek, Michal; Helgaker, Trygve

2013-08-07

We analyze the accuracy of the Coulomb energy calculated using the Gaussian-and-finite-element-Coulomb (GFC) method. In this approach, the electrostatic potential associated with the molecular electronic density is obtained by solving the Poisson equation and then used to calculate matrix elements of the Coulomb operator. The molecular electrostatic potential is expanded in a mixed Gaussian-finite-element (GF) basis set consisting of Gaussian functions of s symmetry centered on the nuclei (with exponents obtained from a full optimization of the atomic potentials generated by the atomic densities from symmetry-averaged restricted open-shell Hartree-Fock theory) and shape functions defined on uniform finite elements. The quality of the GF basis is controlled by means of a small set of parameters; for a given width of the finite elements d, the highest accuracy is achieved at smallest computational cost when tricubic (n = 3) elements are used in combination with two (γ(H) = 2) and eight (γ(1st) = 8) Gaussians on hydrogen and first-row atoms, respectively, with exponents greater than a given threshold (αmin (G)=0.5). The error in the calculated Coulomb energy divided by the number of atoms in the system depends on the system type but is independent of the system size or the orbital basis set, vanishing approximately like d(4) with decreasing d. If the boundary conditions for the Poisson equation are calculated in an approximate way, the GFC method may lose its variational character when the finite elements are too small; with larger elements, it is less sensitive to inaccuracies in the boundary values. As it is possible to obtain accurate boundary conditions in linear time, the overall scaling of the GFC method for large systems is governed by another computational step-namely, the generation of the three-center overlap integrals with three Gaussian orbitals. The most unfavorable (nearly quadratic) scaling is observed for compact, truly three-dimensional systems

Finite Element Modelling and Analysis of Damage Detection Methodology in Piezo Electric Sensor and Actuator Integrated Sandwich Cantilever Beam

Science.gov (United States)

Pradeep, K. R.; Thomas, A. M.; Basker, V. T.

2018-03-01

Structural health monitoring (SHM) is an essential component of futuristic civil, mechanical and aerospace structures. It detects the damages in system or give warning about the degradation of structure by evaluating performance parameters. This is achieved by the integration of sensors and actuators into the structure. Study of damage detection process in piezoelectric sensor and actuator integrated sandwich cantilever beam is carried out in this paper. Possible skin-core debond at the root of the cantilever beam is simulated and compared with undamaged case. The beam is actuated using piezoelectric actuators and performance differences are evaluated using Polyvinylidene fluoride (PVDF) sensors. The methodology utilized is the voltage/strain response of the damaged versus undamaged beam against transient actuation. Finite element model of piezo-beam is simulated in ANSYSTM using 8 noded coupled field element, with nodal degrees of freedoms are translations in the x, y directions and voltage. An aluminium sandwich beam with a length of 800mm, thickness of core 22.86mm and thickness of skin 0.3mm is considered. Skin-core debond is simulated in the model as unmerged nodes. Reduction in the fundamental frequency of the damaged beam is found to be negligible. But the voltage response of the PVDF sensor under transient excitation shows significantly visible change indicating the debond. Piezo electric based damage detection system is an effective tool for the damage detection of aerospace and civil structural system having inaccessible/critical locations and enables online monitoring possibilities as the power requirement is minimal.

Studies on tender wheatgrass: estimation of elemental content, bioaccessibility of essential elements and antioxidant activity

International Nuclear Information System (INIS)

Reddy, A.V.R.; Acharya, R.; Nair, A.G.C.; Kulkarni, S.D.; Rajurkar, N.S.

2008-08-01

Tender wheatgrass is being consumed by human beings in juice form or as it is due to its antioxidant potential and medicinal value. Systematic studies were carried out to (i) estimate elemental profiles as a function of growth period and conditions, bioaccessibility of different elements and the antioxidant potential of the tender wheatgrass, (ii) determine the optimum growth period for obtaining maximum benefit and (iii) examine the possible correlation between antioxidant potential and mineral content. Wheatgrass was grown in four different conditions namely (i) tap water, (ii) tap water with nutrients, (iii) soil and tap water and (iv) soil with nutrient solution. The studies were carried out on the wheatgrass of 5-20 days old. For comparison with laboratory grown wheatgrass, a set of commercially available wheatgrass tablets and wheat seeds were also studied. Instrumental neutron activation analysis (INAA) was used for concentration determination of elements in the wheatgrass, wheat seeds and wheatgrass tablets. A total of 15 elements like Na, K, Ca, Mg, Mn, Br, Fe and Zn were determined in the samples of shoots and roots of tender wheatgrass. A comparison with the recommended dietary allowance (RDA) of different essential elements with that in tender wheatgrass revealed that wheatgrass is a good source of minerals for health benefits rather than a food supplement. Bioaccessible fractions of various elements were estimated by a chemical NAA method by subjecting the samples to in vitro gastric and gastro-intestinal digestion followed by NAA. The bioaccessibility concentrations by both the measurements were in the range of 9-60%. It was found that bioaccessibility of the elements studied was the highest from fresh wheatgrass and the lowest from wheat seeds. Accuracy of the NAA method was evaluated by analyzing two biological reference materials, SRM 1573a (Tomato leaves) from NIST, USA and ICHTJ CTA-vtl-2 (Tobacco leaves) from INCT, Poland. The antioxidant

Integration of auto analysis program of gamma spectrum and software and determination of element content in sample by k-zero method

International Nuclear Information System (INIS)

Trinh Quang Vinh; Truong Thi Hong Loan; Mai Van Nhon; Huynh Truc Phuong

2014-01-01

Integrating the gamma spectrum auto-analysis program with elemental analysis software by k-zero method is the objective for many researchers. This work is the first stepin building an auto analysis program of gamma spectrum, which includes modules of reading spectrum, displaying spectrum, calibrating energy of peak, smoothing spectrum, calculating peak area and determining content of elements in sample. Then, the results from the measurements of standard samples by a low level spectrometer using HPGe detector are compared to those of other gamma spectrum auto-analysis programs. (author)

The Four-Element Framework: An Integrated Test and Evaluation Strategy

National Research Council Canada - National Science Library

Wilcox, Christopher M

2007-01-01

...) planning and execution. Process is comprised of four elements: 1) Operational View (OV) - mission tasks, activities, operational elements and information required to accomplish warfighting mission. 2) System View (SV...

An efficient finite element solution for gear dynamics

International Nuclear Information System (INIS)

Cooley, C G; Parker, R G; Vijayakar, S M

2010-01-01

A finite element formulation for the dynamic response of gear pairs is proposed. Following an established approach in lumped parameter gear dynamic models, the static solution is used as the excitation in a frequency domain solution of the finite element vibration model. The nonlinear finite element/contact mechanics formulation provides accurate calculation of the static solution and average mesh stiffness that are used in the dynamic simulation. The frequency domain finite element calculation of dynamic response compares well with numerically integrated (time domain) finite element dynamic results and previously published experimental results. Simulation time with the proposed formulation is two orders of magnitude lower than numerically integrated dynamic results. This formulation admits system level dynamic gearbox response, which may include multiple gear meshes, flexible shafts, rolling element bearings, housing structures, and other deformable components.

Elemental bioaccumulators in air pollution studies

International Nuclear Information System (INIS)

Freitas, M.C.

1995-01-01

K 0 -Based instrumental neutron activation analysis (k 0 INAA) was used to determine the concentrations of Cr, Fe, Co, Zn, Se, Sb and Hg in the vascular plants Cistus salvifolius and Inula viscosa and in the lichen Parmelia sulcata. The samples were collected in the neighbourhood of industrial complexes. The elemental accumulation in the vascular plants and the lichen are compared to optimize the choice of the bioaccumulator. It is concluded that P.sulcata seems to be the best accumulator of the three species for the element studied; Cistus salvifolius is sensitive to the contents of Zn, Fe, Cr and Sb in the air; Inula viscosa seems to accumulate Fe, Sb, Co, Cr and Zn. Nevertheless, it is concluded that lichen is a good air pollution indicator, while the vascular plants are not due to the large seasonal variations found in the elemental concentrations. (author) 11 refs.; 7 figs.; 2 tabs

STARS: An Integrated, Multidisciplinary, Finite-Element, Structural, Fluids, Aeroelastic, and Aeroservoelastic Analysis Computer Program

Science.gov (United States)

Gupta, K. K.

1997-01-01

A multidisciplinary, finite element-based, highly graphics-oriented, linear and nonlinear analysis capability that includes such disciplines as structures, heat transfer, linear aerodynamics, computational fluid dynamics, and controls engineering has been achieved by integrating several new modules in the original STARS (STructural Analysis RoutineS) computer program. Each individual analysis module is general-purpose in nature and is effectively integrated to yield aeroelastic and aeroservoelastic solutions of complex engineering problems. Examples of advanced NASA Dryden Flight Research Center projects analyzed by the code in recent years include the X-29A, F-18 High Alpha Research Vehicle/Thrust Vectoring Control System, B-52/Pegasus Generic Hypersonics, National AeroSpace Plane (NASP), SR-71/Hypersonic Launch Vehicle, and High Speed Civil Transport (HSCT) projects. Extensive graphics capabilities exist for convenient model development and postprocessing of analysis results. The program is written in modular form in standard FORTRAN language to run on a variety of computers, such as the IBM RISC/6000, SGI, DEC, Cray, and personal computer; associated graphics codes use OpenGL and IBM/graPHIGS language for color depiction. This program is available from COSMIC, the NASA agency for distribution of computer programs.

NASA Integrated Network COOP

Science.gov (United States)

Anderson, Michael L.; Wright, Nathaniel; Tai, Wallace

2012-01-01

Natural disasters, terrorist attacks, civil unrest, and other events have the potential of disrupting mission-essential operations in any space communications network. NASA's Space Communications and Navigation office (SCaN) is in the process of studying options for integrating the three existing NASA network elements, the Deep Space Network, the Near Earth Network, and the Space Network, into a single integrated network with common services and interfaces. The need to maintain Continuity of Operations (COOP) after a disastrous event has a direct impact on the future network design and operations concepts. The SCaN Integrated Network will provide support to a variety of user missions. The missions have diverse requirements and include anything from earth based platforms to planetary missions and rovers. It is presumed that an integrated network, with common interfaces and processes, provides an inherent advantage to COOP in that multiple elements and networks can provide cross-support in a seamless manner. The results of trade studies support this assumption but also show that centralization as a means of achieving integration can result in single points of failure that must be mitigated. The cost to provide this mitigation can be substantial. In support of this effort, the team evaluated the current approaches to COOP, developed multiple potential approaches to COOP in a future integrated network, evaluated the interdependencies of the various approaches to the various network control and operations options, and did a best value assessment of the options. The paper will describe the trade space, the study methods, and results of the study.

Integral or integrated marketing

Directory of Open Access Journals (Sweden)

Davčik Nebojša

2006-01-01

Full Text Available Marketing theorists and experts try to develop business efficient organization and to get marketing performance at higher, business integrated level since its earliest beginnings. The core issue in this paperwork is the dialectic and practical approach dilemma should we develop integrated or integral marketing approach in the organization. The presented company cases as well as dialectic and functional explanations of this dilemma clearly shows that integrated marketing is narrower approach than integral marketing if we take as focal point new, unique and completed entity. In the integration the essence is in getting different parts together, which do not have to make necessary the new entity. The key elements in the definition of the integral marketing are necessity and holistic, e.g. necessity to develop new, holistic entity.

Qualitative case study methodology in nursing research: an integrative review.

Science.gov (United States)

Anthony, Susan; Jack, Susan

2009-06-01

This paper is a report of an integrative review conducted to critically analyse the contemporary use of qualitative case study methodology in nursing research. Increasing complexity in health care and increasing use of case study in nursing research support the need for current examination of this methodology. In 2007, a search for case study research (published 2005-2007) indexed in the CINAHL, MEDLINE, EMBASE, PsychINFO, Sociological Abstracts and SCOPUS databases was conducted. A sample of 42 case study research papers met the inclusion criteria. Whittemore and Knafl's integrative review method guided the analysis. Confusion exists about the name, nature and use of case study. This methodology, including terminology and concepts, is often invisible in qualitative study titles and abstracts. Case study is an exclusive methodology and an adjunct to exploring particular aspects of phenomena under investigation in larger or mixed-methods studies. A high quality of case study exists in nursing research. Judicious selection and diligent application of literature review methods promote the development of nursing science. Case study is becoming entrenched in the nursing research lexicon as a well-accepted methodology for studying phenomena in health and social care, and its growing use warrants continued appraisal to promote nursing knowledge development. Attention to all case study elements, process and publication is important in promoting authenticity, methodological quality and visibility.

The development of a volume element model for energy systems engineering and integrative thermodynamic optimization

Science.gov (United States)

Yang, Sam

The dissertation presents the mathematical formulation, experimental validation, and application of a volume element model (VEM) devised for modeling, simulation, and optimization of energy systems in their early design stages. The proposed model combines existing modeling techniques and experimental adjustment to formulate a reduced-order model, while retaining sufficient accuracy to serve as a practical system-level design analysis and optimization tool. In the VEM, the physical domain under consideration is discretized in space using lumped hexahedral elements (i.e., volume elements), and the governing equations for the variable of interest are applied to each element to quantify diverse types of flows that cross it. Subsequently, a system of algebraic and ordinary differential equations is solved with respect to time and scalar (e.g., temperature, relative humidity, etc.) fields are obtained in both spatial and temporal domains. The VEM is capable of capturing and predicting dynamic physical behaviors in the entire system domain (i.e., at system level), including mutual interactions among system constituents, as well as with their respective surroundings and cooling systems, if any. The VEM is also generalizable; that is, the model can be easily adapted to simulate and optimize diverse systems of different scales and complexity and attain numerical convergence with sufficient accuracy. Both the capability and generalizability of the VEM are demonstrated in the dissertation via thermal modeling and simulation of an Off-Grid Zero Emissions Building, an all-electric ship, and a vapor compression refrigeration (VCR) system. Furthermore, the potential of the VEM as an optimization tool is presented through the integrative thermodynamic optimization of a VCR system, whose results are used to evaluate the trade-offs between various objective functions, namely, coefficient of performance, second law efficiency, pull-down time, and refrigerated space temperature, in

True Concurrent Thermal Engineering Integrating CAD Model Building with Finite Element and Finite Difference Methods

Science.gov (United States)

Panczak, Tim; Ring, Steve; Welch, Mark

1999-01-01

Thermal engineering has long been left out of the concurrent engineering environment dominated by CAD (computer aided design) and FEM (finite element method) software. Current tools attempt to force the thermal design process into an environment primarily created to support structural analysis, which results in inappropriate thermal models. As a result, many thermal engineers either build models "by hand" or use geometric user interfaces that are separate from and have little useful connection, if any, to CAD and FEM systems. This paper describes the development of a new thermal design environment called the Thermal Desktop. This system, while fully integrated into a neutral, low cost CAD system, and which utilizes both FEM and FD methods, does not compromise the needs of the thermal engineer. Rather, the features needed for concurrent thermal analysis are specifically addressed by combining traditional parametric surface based radiation and FD based conduction modeling with CAD and FEM methods. The use of flexible and familiar temperature solvers such as SINDA/FLUINT (Systems Improved Numerical Differencing Analyzer/Fluid Integrator) is retained.

Integrative modeling of eQTLs and cis-regulatory elements suggests mechanisms underlying cell type specificity of eQTLs.

Directory of Open Access Journals (Sweden)

Christopher D Brown

Full Text Available Genetic variants in cis-regulatory elements or trans-acting regulators frequently influence the quantity and spatiotemporal distribution of gene transcription. Recent interest in expression quantitative trait locus (eQTL mapping has paralleled the adoption of genome-wide association studies (GWAS for the analysis of complex traits and disease in humans. Under the hypothesis that many GWAS associations tag non-coding SNPs with small effects, and that these SNPs exert phenotypic control by modifying gene expression, it has become common to interpret GWAS associations using eQTL data. To fully exploit the mechanistic interpretability of eQTL-GWAS comparisons, an improved understanding of the genetic architecture and causal mechanisms of cell type specificity of eQTLs is required. We address this need by performing an eQTL analysis in three parts: first we identified eQTLs from eleven studies on seven cell types; then we integrated eQTL data with cis-regulatory element (CRE data from the ENCODE project; finally we built a set of classifiers to predict the cell type specificity of eQTLs. The cell type specificity of eQTLs is associated with eQTL SNP overlap with hundreds of cell type specific CRE classes, including enhancer, promoter, and repressive chromatin marks, regions of open chromatin, and many classes of DNA binding proteins. These associations provide insight into the molecular mechanisms generating the cell type specificity of eQTLs and the mode of regulation of corresponding eQTLs. Using a random forest classifier with cell specific CRE-SNP overlap as features, we demonstrate the feasibility of predicting the cell type specificity of eQTLs. We then demonstrate that CREs from a trait-associated cell type can be used to annotate GWAS associations in the absence of eQTL data for that cell type. We anticipate that such integrative, predictive modeling of cell specificity will improve our ability to understand the mechanistic basis of human

elements of contemporary integrated science curriculum

African Journals Online (AJOL)

both science and technology (Hurd, 1975). Discoveries in nature are made easier through integration of ideas, thoughts and concepts. To this end, science teaching in the modern world ought to be interdisciplinary, unified, society based and aspire above all to achieve scientific literacy (Arokoyu and Dike, 2009). These are.

Relativistic quantum chemistry of the superheavy elements. Closed-shell element 114 as a case study

International Nuclear Information System (INIS)

Schwerdtfeger, Peter; Seth, Michael

2002-01-01

The chemistry of superheavy element 114 is reviewed. The ground state of element 114 is closed shell [112]7s 2 7p 1/2 2 and shows a distinct chemical inertness (low reactivity). This inertness makes it rather difficult to study the atom-at-a-time chemistry of 114 in the gas or liquid phase. (author)

Linking an Integrative Behavior Model to Elements of Environmental Campaigns: An Analysis of Face-to-Face Communication and Posters against Littering

Directory of Open Access Journals (Sweden)

Ralph Hansmann

2015-05-01

Full Text Available Diverse elements of anti-littering campaigns may be effective at addressing different causes of littering. Therefore, a complementary approach combining various elements is needed to ensure the behavioral effectiveness of corresponding campaigns. The present study investigates personal, problem-centered face-to-face conversations compared to three different types of anti-littering posters (witty, authoritarian, environmentally oriented. In total, N = 147 persons participated in the questionnaire-based survey. Pictures of the three anti-littering posters were presented to all respondents, but only 82 of them additionally took part in problem-centered face-to-face conversations. Participants of the latter condition liked the conversations significantly more and judged them more effective for reducing littering than each of the three posters. Intentions for future behavior also improved more in the condition with face-to-face communications than in the reference condition in which only the anti-littering posters were presented. Regarding the posters, it was found that the witty and the environmentally-oriented poster were liked more and judged to be more effective by the respondents than the authoritarian poster. Findings are discussed in relation to the design of campaigns, which combine elements with reference to an integrative behavior model covering a broad range of factors, including processes of justifications, habit formation and reactance.

The integration of occupational therapy into primary care: a multiple case study design

Science.gov (United States)

2013-01-01

Background For over two decades occupational therapists have been encouraged to enhance their roles within primary care and focus on health promotion and prevention activities. While there is a clear fit between occupational therapy and primary care, there have been few practice examples, despite a growing body of evidence to support the role. In 2010, the province of Ontario, Canada provided funding to include occupational therapists as members of Family Health Teams, an interprofessional model of primary care. The integration of occupational therapists into this model of primary care is one of the first large scale initiatives of its kind in North America. The objective of the study was to examine how occupational therapy services are being integrated into primary care teams and understand the structures supporting the integration. Methods A multiple case study design was used to provide an in-depth description of the integration of occupational therapy. Four Family Health Teams with occupational therapists as part of the team were identified. Data collection included in-depth interviews, document analyses, and questionnaires. Results Each Family Health Team had a unique organizational structure that contributed to the integration of occupational therapy. Communication, trust and understanding of occupational therapy were key elements in the integration of occupational therapy into Family Health Teams, and were supported by a number of strategies including co-location, electronic medical records and team meetings. An understanding of occupational therapy was critical for integration into the team and physicians were less likely to understand the occupational therapy role than other health providers. Conclusion With an increased emphasis on interprofessional primary care, new professions will be integrated into primary healthcare teams. The study found that explicit strategies and structures are required to facilitate the integration of a new professional group

Mechanical integration studies for the CLIC vertex and inner tracking detectors

CERN Document Server

Villarejo Bermudez, M.A.; Gerwig, H.

2015-01-01

Since the publication of the CLIC Conceptual Design Report, work has proceeded in order to establish a preliminary mechanical design for the innermost CLIC detector region. This note proposes a design for the main Carbon-Fibre Reinforced Polymer (CFRP) structural elements of the inner detectors, for the beam pipe and their supports. It also describes an assembly sequence for the integration of the sensors and the mechanical components. Mechanical simulations of different structural elements and a material budget estimation are appended. Details of a proposed cabling layout for all the subdetectors are included.

A novel Sulfolobus non-conjugative extrachromosomal genetic element capable of integration into the host genome and spreading in the presence of a fusellovirus

DEFF Research Database (Denmark)

Wang, Ying; Duan, Zhenhong; Zhu, Haojun

2007-01-01

An integrative non-conjugative extrachromosomal genetic element, denoted as pSSVi, has been isolated from a Sulfolobus solfataricus P2 strain and was characterized. This genetic element is a double-stranded DNA of 5740 bp in size and contains eight open reading frames (ORFs). It resembles members....... Interestingly, pSSVi encodes an SSV-type integrase which probably catalyzes the integration of its genome into a specific site (a tRNA(Arg) gene) in the S. solfataricus P2 genome. Like pSSVx, pSSVi can be packaged into a spindle-like viral particle and spread with the help of SSV1 or SSV2. In addition, both SSV......1 and SSV2 appeared to replicate more efficiently in the presence of pSSVi. Given the versatile genetic abilities, pSSVi appears to be well suited for a role in horizontal gene transfer....

A Study on the Effect of Cohesive Laws on Finite Element Analysis of Crack Propagation Using Cohesive Elements

Energy Technology Data Exchange (ETDEWEB)

Seo, Hyeongseok; Baek, Hyungchan; Kim, Hyungyu [Seoul Nat' l Univ. of Sci. and Tech., Seoul (Korea, Republic of)

2014-04-15

In this paper, the effect of cohesive laws on the finite element analysis of crack propagation using cohesive elements is investigated through three-point bending and double cantilever beam problems. The cohesive elements are implemented into ABAQUS/Standard user subroutines(UEL), and the shape of cohesive law is varied by changing parameters in polynomial functions of cohesive traction-separation relations. In particular, crack propagation behaviors are studied by comparing load-displacement curves of the analysis models which have different shapes of cohesive laws with the same values of fracture energy and cohesive strength. Furthermore, the influence of the element size on crack propagation is discussed in this study.

Theoretical Aspects of Cross-border Integration-based Economic Cooperation

Directory of Open Access Journals (Sweden)

Bilchak V.

2014-09-01

Full Text Available In this article the author analyses theoretical aspects of border economy in the conditions of modern processes of integration. The author describes the existing schools and concepts of integration stressing the role of government regulation relating to the deformations in the development of the world economic mechanism. Modern studies focus on the evolution of integration processes, which has largely affected the key elements of the world economic mechanism from classical political economy, monopoly regulation. This resulted in monopolistic competition, imperfect competition, and oligopoly – largely, through all fields and poles of economic growth to certain elements of government regulation and social reproduction on the international scale. The author examines the key elements and stages of economic integration. These stages assume a number of consecutive forms: free trade zone, customs union, common market, complete economic integration, and economic union. The article shows that the transition occurs from the lowest to the highest stages — from the processes of integration involving, firstly, trade market and then capital and labour markets to the integration of social sphere. The theoretical aspects of all these transformations can be easily traced in the case of EU integration processes.

Linear pulse motor type control element drive mechanism for the integral reactor

International Nuclear Information System (INIS)

Yu, J. Y.; Choi, S.; Kim, J. H.; Huh, H.; Park, K. B.

2007-01-01

The integral reactor SMART currently under development at Korea Atomic Energy Research Institute is designed with soluble boron free operation and use of nuclear heating for reactor startup. These design features require the Control Element Drive Mechanism (CEDM) for SMART to have fine-step movement capability as well as high reliability for the fine reactivity control. In this paper, design characteristics of a new concept CEDM driven by the Linear Pulse Motor (LPM) which meets the design requirements of the integral reactor SMART are introduced. The primary dimensions of the linear pulse motor are determined by the electro-magnetic analysis and the results are also presented. In parallel with the electro-magnetic analysis, the conceptual design of the CEDM is visualized and checked for interferences among parts by assembling three dimensional (3D) models on the computer. Prototype of LPM with double air-gaps for the CEDM sub-assemblies to lift 100 kg is designed, analysed, manufactured and tested to confirm the validity of the CEDM design concept. A converter and a test facility are manufactured to verify the dynamic performance of the LPM. The mover of the LPM is welded with ferromagnetic material and non-ferromagnetic material to get the magnetic flux path between inner stator and outer stator. The thrust forces of LPM predicted by analytic model have shown good agreement with experimental results from the prototype LPM. It is found that the LPM type CEDM has high force density and simple drive mechanism to reduce volume and satisfy the reactor operating circumstances with high pressure and temperature

Metrological certification of systems to monitor the seal integrity of fuel-element cladding based on exposed fuel in sodium-cooled fast reactors

International Nuclear Information System (INIS)

Eliseev, A.V.; Filonov, V.S.; Ushakov, V.M.; Belov, S.P.; Pedyash, B.V.; Zemtsev, B.V.; Skorikov, N.V.

1992-01-01

In sodium-cooled fast reactors, the clad monitoring system for seal integrity of the fuel element cladding is practically the only source of operator information on the serviceability of fuel elements in the core. The monitoring system can be used as the basis for critical decisions whether the reactor must be shut down of whether operation can continue, but only if the meterologically provided measurements are reliable. This article describes a method developed for certifying working rods on the basis of the domestic standard. The method includes a combined irradiation of the sample and the rod to be certified in an arbitrary field of a plutonium-beryllium neutron source with an output rate greater than 10 8 sec -1 , which is mounted in a paraffin moderator. The positive results of the metrological certification of the system to monitor cladding seal integrity leads the authors to recommend this method for other current and planned sodium-cooled fast reactors. 6 refs., 2 tabs

An integral transform related to quantization

International Nuclear Information System (INIS)

Daubechies, I.; Grossmann, A.

1978-08-01

The authors study in a coordinate-free way the integral transform relating a function on phase space to the matrix elements of the corresponding quantum mechanical operator between coherent states. The items discussed include: inversion (given by the same kernel), bounds, matrix elements between eigenstates of harmonic oscillators, and classical functions corresponding to permutation operators. (author)

Integrated analytical methodologies for the study of corrosion processes in archaeological bronzes

Energy Technology Data Exchange (ETDEWEB)

Alberghina, Maria Francesca; Barraco, Rosita; Brai, Maria; Schillaci, Tiziano, E-mail: tschillaci@unipa.it; Tranchina, Luigi

2011-02-15

The investigations on structure and micro-chemical composition of archaeological metal alloys are needed in archaeometry. The aim of this study is devoted both to acquire information about their provenance and production technology, and to improve our understanding about the corrosion processes. In this paper we present the study of the corrosion phenomena of bronze samples, laboratory-made according to binary, ternary and quaternary alloys typical of Roman archaeometallurgical production through an integrated methodology based on the use of non or micro invasive physical techniques. Among the analysed samples, two were artificially aged through burial in the archaeological site of Tharros, along the west coast of Sardinia (Italy). The corrosion products, typical of the bronzes in archaeological sites near the sea, have been characterized by non invasive and micro-destructive measurements. In particular, the corrosion patinas were examined through optical microscopy, scanning electron microscopy and microanalysis, X-ray fluorescence and laser ablation spectroscopy. The use of integrated technologies allowed us to determine both the elemental composition and surface morphology of the patina, highlighting the correlation between patina nature and chemical composition of the burial context. Moreover, data obtained by the laser-induced breakdown spectroscopy along the depth profile on the samples, have yielded information about the stratigraphic layers of corrosion products and their growth. Finally, the depth profiles allowed us to verify both the chemical elements constituting the patina, the metal ions constituting the alloy and the occurrence of migration phenomena from bulk to the surface.

Integrated analytical methodologies for the study of corrosion processes in archaeological bronzes

International Nuclear Information System (INIS)

Alberghina, Maria Francesca; Barraco, Rosita; Brai, Maria; Schillaci, Tiziano; Tranchina, Luigi

2011-01-01

The investigations on structure and micro-chemical composition of archaeological metal alloys are needed in archaeometry. The aim of this study is devoted both to acquire information about their provenance and production technology, and to improve our understanding about the corrosion processes. In this paper we present the study of the corrosion phenomena of bronze samples, laboratory-made according to binary, ternary and quaternary alloys typical of Roman archaeometallurgical production through an integrated methodology based on the use of non or micro invasive physical techniques. Among the analysed samples, two were artificially aged through burial in the archaeological site of Tharros, along the west coast of Sardinia (Italy). The corrosion products, typical of the bronzes in archaeological sites near the sea, have been characterized by non invasive and micro-destructive measurements. In particular, the corrosion patinas were examined through optical microscopy, scanning electron microscopy and microanalysis, X-ray fluorescence and laser ablation spectroscopy. The use of integrated technologies allowed us to determine both the elemental composition and surface morphology of the patina, highlighting the correlation between patina nature and chemical composition of the burial context. Moreover, data obtained by the laser-induced breakdown spectroscopy along the depth profile on the samples, have yielded information about the stratigraphic layers of corrosion products and their growth. Finally, the depth profiles allowed us to verify both the chemical elements constituting the patina, the metal ions constituting the alloy and the occurrence of migration phenomena from bulk to the surface.

Macrolide resistance gene erm(TR) and erm(TR)-carrying genetic elements in Streptococcus agalactiae: characterization of ICESagTR7, a new composite element containing IMESp2907.

Science.gov (United States)

Mingoia, Marina; Morici, Eleonora; Marini, Emanuela; Brenciani, Andrea; Giovanetti, Eleonora; Varaldo, Pietro E

2016-03-01

The objective of this study was to investigate macrolide-resistant Streptococcus agalactiae isolates harbouring erm(TR), an erm(A) gene subclass, with emphasis on their erm(TR)-carrying genetic elements. Four erm(TR)-carrying elements have been described to date: three closely related (ICE10750-RD.2, Tn1806 and ICESp1108) in Streptococcus pyogenes, Streptococcus pneumoniae and S. pyogenes, respectively; and one completely different (IMESp2907, embedded in ICESp2906 to form ICESp2905) in S. pyogenes. Seventeen macrolide-resistant erm(TR)-positive S. agalactiae isolates were phenotypically and genotypically characterized. Their erm(TR)-carrying elements were explored by analysing the distinctive recombination genes of known erm(TR)-carrying integrative and conjugative elements (ICEs) and by PCR mapping. The new genetic context and organization of IMESp2907 in S. agalactiae were explored using several experimental procedures and in silico analyses. Five isolates harboured ICE10750-RD.2/Tn1806, five isolates harboured ICESp1108 and five isolates bore unknown erm(TR)-carrying elements. The remaining two isolates, exhibiting identical serotypes and pulsotypes, harboured IMESp2907 in a new genetic environment, which was further investigated in one of the two isolates, SagTR7. IMESp2907 was circularizable in S. agalactiae, as described in S. pyogenes. The new IMESp2907 junctions were identified based on its site-specific integration; the att sites were almost identical to those in S. pyogenes. In strain SagTR7, erm(TR)-carrying IMESp2907 was embedded in an erm(TR)-less internal element related to ICE10750-RD.2/Tn1806, which, in turn, was embedded in an ICESde3396-like element. The resulting whole ICE, ICESagTR7 (∼129 kb), was integrated into the chromosome downstream of the rplL gene, and was excisable in circular form and transferable by conjugation. This is the first study exploring erm(TR)-carrying genetic elements in S. agalactiae. © The Author 2015. Published by

Studies of Flerovium and Element 115 Homologs with Macrocyclic Extractants

Energy Technology Data Exchange (ETDEWEB)

Despotopulos, John D. [Univ. of Nevada, Las Vegas, NV (United States)

2015-03-12

Study of the chemistry of the heaviest elements, Z ≥ 104, poses a unique challenge due to their low production cross-sections and short half-lives. Chemistry also must be studied on the one-atom-at-a-time scale, requiring automated, fast, and very efficient chemical schemes. Recent studies of the chemical behavior of copernicium (Cn, element 112) and flerovium (Fl, element 114) together with the discovery of isotopes of these elements with half-lives suitable for chemical studies have spurred a renewed interest in the development of rapid systems designed to study the chemical properties of elements with Z ≥ 114. This dissertation explores both extraction chromatography and solvent extraction as methods for development of a rapid chemical separation scheme for the homologs of flerovium (Pb, Sn, Hg) and element 115 (Bi, Sb), with the goal of developing a chemical scheme that, in the future, can be applied to on-line chemistry of both Fl and element 115. Carrier-free radionuclides, used in these studies, of the homologs of Fl and element 115 were obtained by proton activation of high-purity metal foils at the Lawrence Livermore National Laboratory (LLNL) Center for Accelerator Mass Spectrometry (CAMS): ^natIn(p,n)¹¹³Sn, ^natSn(p,n)¹²⁴Sb, and Au(p,n)^197m,gHg. The carrier-free activity was separated from the foils by novel separation schemes based on ion exchange and extraction chromatography techniques. Carrier-free Pb and Bi isotopes were obtained from development of a novel generator based on cation exchange chromatography using the ²³²U parent to generate ²¹²Pb and ²¹²Bi. Macrocyclic extractants, specifically crown ethers and their derivatives, were chosen for these studies; crown ethers show high selectivity for metal ions. Finally. a potential chemical system for Fl was established based on the Eichrom Pb resin, and insight to an improved system based on thiacrown ethers is

Study of Superheavy Elements

International Nuclear Information System (INIS)

Hofmann, Sigurd

2007-01-01

The nuclear shell model predicts that the next doubly magic shell-closure beyond 208 Pb is at a proton number Z = 114, 120, or 126 and at a neutron number N = 172 or 184. The outstanding aim of experimental investigations is the exploration of this region of spherical 'SuperHeavy Elements' (SHEs). Experimental methods are described, which allowed for the identification of elements produced on a cross-section level of about 1 pb. The decay data reveal that for the heaviest elements, the dominant decay mode is alpha emission, not fission. Decay properties as well as reaction cross-sections are compared with results of theoretical investigations. Finally, plans are presented for the further development of the experimental set-up and the application of new techniques, as for instance the precise mass measurement of the produced nuclei using ion traps. At increased sensitivity, the detailed exploration of the region of spherical SHEs will start, after first steps on the island were made in recent years. (Author)

Annual Assessment of Longitudinal Studies and Injury Surveillance for Gender Integration in the Army, 2016

Science.gov (United States)

2017-03-01

each Service to develop and implement validated, occupation-specific physical performance requirements (i.e., gender -neutral occupational standards...Studies and Injury Surveillance for Gender Integration in the Army, 2016 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6...Health Surveillance Branch, Defense Health Agency) 5d. PROJECT NUMBER WBS 0047783 5e. TASK NUMBER 5f. WORK UNIT NUMBER 7. PERFORMING

Functional Integration

Science.gov (United States)

Cartier, Pierre; DeWitt-Morette, Cecile

2010-06-01

Acknowledgements; List symbols, conventions, and formulary; Part I. The Physical and Mathematical Environment: 1. The physical and mathematical environment; Part II. Quantum Mechanics: 2. First lesson: gaussian integrals; 3. Selected examples; 4. Semiclassical expansion: WKB; 5. Semiclassical expansion: beyond WKB; 6. Quantum dynamics: path integrals and operator formalism; Part III. Methods from Differential Geometry: 7. Symmetries; 8. Homotopy; 9. Grassmann analysis: basics; 10. Grassmann analysis: applications; 11. Volume elements, divergences, gradients; Part IV. Non-Gaussian Applications: 12. Poisson processes in physics; 13. A mathematical theory of Poisson processes; 14. First exit time: energy problems; Part V. Problems in Quantum Field Theory: 15. Renormalization 1: an introduction; 16. Renormalization 2: scaling; 17. Renormalization 3: combinatorics; 18. Volume elements in quantum field theory Bryce DeWitt; Part VI. Projects: 19. Projects; Appendix A. Forward and backward integrals: spaces of pointed paths; Appendix B. Product integrals; Appendix C. A compendium of gaussian integrals; Appendix D. Wick calculus Alexander Wurm; Appendix E. The Jacobi operator; Appendix F. Change of variables of integration; Appendix G. Analytic properties of covariances; Appendix H. Feynman's checkerboard; Bibliography; Index.

Improving integration for integrated coastal zone management: an eight country study.

Science.gov (United States)

Portman, M E; Esteves, L S; Le, X Q; Khan, A Z

2012-11-15

Integrated coastal zone management (ICZM) is a widely accepted approach for sustainable management of the coastal environment. ICZM emphasizes integration across sectors, levels of government, uses, stakeholders, and spatial and temporal scales. While improving integration is central to progress in ICZM, the role of and the achievement of integration remain understudied. To further study these two points, our research analyzes the performance of specific mechanisms used to support ICZM in eight countries (Belgium, India, Israel, Italy, Portugal, Sweden, UK, and Vietnam). The assessment is based on a qualitative comparative analysis conducted through the use of two surveys. It focuses on five ICZM mechanisms (environmental impact assessment; planning hierarchy; setback lines; marine spatial planning, and regulatory commission) and their role in improving integration. Our findings indicate that certain mechanisms enhance specific types of integration more effectively than others. Environmental impact assessment enhances science-policy integration and can be useful to integrate knowledge across sectors. Planning hierarchy and regulatory commissions are effective mechanisms to integrate policies across government levels, with the latter also promoting public-government integration. Setback lines can be applied to enhance integration across landscape units. Marine spatial planning is a multi-faceted mechanism with the potential to promote all types of integration. Policy-makers should adopt the mechanisms that are suited to the type of integration needed. Results of this study also contribute to evidence-based coastal management by identifying the most common impediments related to the mechanisms of integration in the eight studied countries. Copyright © 2012 Elsevier B.V. All rights reserved.

It's on Us: A Case Study of Academic Integrity in A Mid-Western Community College

Science.gov (United States)

Parnther, Ceceilia

2016-01-01

Academic ethics and integrity are necessary elements of a quality education. The need for academic integrity education on campuses has been well documented (Bertram Gallant, 2008, 2016; Bertram Gallant & Drinan, 2006; Liebler, 2009; McCabe, Butterfield, & Trevino, 2004). Academic integrity is a cornerstone of the learning process (Bretag…

Definition, technology readiness, and development cost of the orbit transfer vehicle engine integrated control and health monitoring system elements

Science.gov (United States)

Cannon, I.; Balcer, S.; Cochran, M.; Klop, J.; Peterson, S.

1991-01-01

An Integrated Control and Health Monitoring (ICHM) system was conceived for use on a 20 Klb thrust baseline Orbit Transfer Vehicle (OTV) engine. Considered for space used, the ICHM was defined for reusability requirements for an OTV engine service free life of 20 missions, with 100 starts and a total engine operational time of 4 hours. Functions were derived by flowing down requirements from NASA guidelines, previous OTV engine or ICHM documents, and related contracts. The elements of an ICHM were identified and listed, and these elements were described in sufficient detail to allow estimation of their technology readiness levels. These elements were assessed in terms of technology readiness level, and supporting rationale for these assessments presented. The remaining cost for development of a minimal ICHM system to technology readiness level 6 was estimated. The estimates are within an accuracy range of minus/plus 20 percent. The cost estimates cover what is needed to prepare an ICHM system for use on a focussed testbed for an expander cycle engine, excluding support to the actual test firings.

Nuclear fuel element leak detection system

International Nuclear Information System (INIS)

John, C.D. Jr.

1978-01-01

Disclosed is a leak detection system integral with a wall of a building used to fabricate nuclear fuel elements for detecting radiation leakage from the nuclear fuel elements as the fuel elements exit the building. The leak detecting system comprises a shielded compartment constructed to withstand environmental hazards extending into a similarly constructed building and having sealed doors on both ends along with leak detecting apparatus connected to the compartment. The leak detecting system provides a system for removing a nuclear fuel element from its fabrication building while testing for radiation leaks in the fuel element

Adaptive Kronrod-Patterson integration of non-linear finite-element matrices

DEFF Research Database (Denmark)

Janssen, Hans

2010-01-01

inappropriate discretization. In response, this article develops adaptive integration, based on nested Kronrod-Patterson-Gauss integration schemes: basically, the integration order is adapted to the locally observed grade of non-linearity. Adaptive integration is developed based on a standard infiltration...

A first course in finite elements

CERN Document Server

Fish, Jacob

2007-01-01

Developed from the authors, combined total of 50 years undergraduate and graduate teaching experience, this book presents the finite element method formulated as a general-purpose numerical procedure for solving engineering problems governed by partial differential equations.  Focusing on the formulation and application of the finite element method through the integration of finite element theory, code development, and software application, the book is both introductory and self-contained, as well as being a hands-on experience for any student. This authoritative text on Finite Elements:Adopts

Geomechanical Simulations of Caprock Integrity Using the Livermore Distinict Element Method

Energy Technology Data Exchange (ETDEWEB)

Morris, J; Johnson, S; Friedmann, S J

2008-04-17

Large-scale carbon capture and sequestration (CCS) projects involving annual injections of millions of tons of CO2 are a key infrastructural element needed to substantially reduce greenhouse gas emissions. The large rate and volume of injection will induce pressure and stress gradients within the formation that could activate existing fractures and faults, or drive new fractures through the caprock. We will present results of an ongoing investigation to identify conditions that will activate existing fractures/faults or make new fractures within the caprock using the Livermore Distinct Element Code (LDEC). LDEC is a multiphysics code, developed at LLNL, capable of simulating dynamic fracture of rock masses under a range of conditions. As part of a recent project, LDEC has been extended to consider fault activation and dynamic fracture of rock masses due to pressurization of the pore-space. We will present several demonstrations of LDEC functionality and an application of LDEC to a CO2 injection scenario. We present results from our investigations of Teapot Dome using LDEC to study the potential for fault activation during injection. Using this approach, we built finite element models of the rock masses surrounding bounding faults and explicitly simulated the compression and shear on the fault interface. A CO2 injection source was introduced and the area of fault activation was predicted as a function of injection rate. This work presents an approach where the interactions of all locations on the fault are considered in response to specific injection scenarios. For example, with LDEC, as regions of the fault fail, the shear load is taken up elsewhere on the fault. The results of this study are consistent with previous studies of Teapot Dome and indicate significantly elevated pore pressures are required to activate the bounding faults, given the assumed in situ stress state on the faults.

Finite element analysis theory and application with ANSYS

CERN Document Server

Moaveni, Saeed

2015-01-01

For courses in Finite Element Analysis, offered in departments of Mechanical or Civil and Environmental Engineering. While many good textbooks cover the theory of finite element modeling, Finite Element Analysis: Theory and Application with ANSYS is the only text available that incorporates ANSYS as an integral part of its content. Moaveni presents the theory of finite element analysis, explores its application as a design/modeling tool, and explains in detail how to use ANSYS intelligently and effectively. Teaching and Learning Experience This program will provide a better teaching and learning experience-for you and your students. It will help: *Present the Theory of Finite Element Analysis: The presentation of theoretical aspects of finite element analysis is carefully designed not to overwhelm students. *Explain How to Use ANSYS Effectively: ANSYS is incorporated as an integral part of the content throughout the book. *Explore How to Use FEA as a Design/Modeling Tool: Open-ended design problems help stude...

Experimental study of the leakage rate through cracked reinforced concrete wall elements for defining the functional failure criteria of containment buildings

International Nuclear Information System (INIS)

Choun, Young Sun; Cho, Nam So

2004-01-01

Containment buildings in nuclear power plants should maintain their structural safety as well as their functional integrity during an operation period. To maintain the functional integrity, the wall and dome of the containment buildings have to maintain their air tightness under extreme loading conditions such as earthquakes, missile impact, and severe accidents. For evaluating the functional failure of containments, it is important to predict the leak amount through cracked concrete walls. The leakage through concrete cracks has been studied since 1972. Buss examined the flow rate of air through a pre-existing crack in a slab under air pressure. Rizkalla el al. initiated an experimental study for the leakage of prestressed concrete building segments under uniaxial and biaxial loadings to simulate the loading condition of containment buildings under an internal pressure. Recently, Salmon el al. initiated an experimental program for determining the leak rates in typical reinforced concrete shear walls subjected to beyond design basis earthquakes. This study investigates the cracking behavior of reinforced concrete containment wall elements under a uniaxial tension and addresses the outline of the leakage test for unlined containment wall elements

Utilization of Large Cohesive Interface Elements for Delamination Simulation

DEFF Research Database (Denmark)

Bak, Brian Lau Verndal; Lund, Erik

2012-01-01

This paper describes the difficulties of utilizing large interface elements in delamination simulation. Solutions to increase the size of applicable interface elements are described and cover numerical integration of the element and modifications of the cohesive law....

Integrative study of the behavior of transuranic elements in the marine environment. Progress report, June 1, 1982-May 31, 1983

International Nuclear Information System (INIS)

Choppin, G.R.; Morse, J.W.

1983-01-01

The adsorption of actinides from marine solutions into sediments was studied to model the distribution and speciation of transuranic elements in the marine environment. The basic plan involves measuring the complexity and hydrolysis constants of actinides in oxidation states III to VI and studying a limited number of common sediment components to determine which factors determine the partitioning of actinides among these components. Individual sediment components then will be combined in synthetic sediments of increasing complexity and the distributions studied between these sediments and solutions

Quadrature representation of finite element variational forms

DEFF Research Database (Denmark)

Ølgaard, Kristian Breum; Wells, Garth N.

2012-01-01

This chapter addresses the conventional run-time quadrature approach for the numerical integration of local element tensors associated with finite element variational forms, and in particular automated optimizations that can be performed to reduce the number of floating point operations...

Monolithic microwave integrated circuit with integral array antenna

International Nuclear Information System (INIS)

Stockton, R.J.; Munson, R.E.

1984-01-01

A monolithic microwave integrated circuit including an integral array antenna. The system includes radiating elements, feed network, phasing network, active and/or passive semiconductor devices, digital logic interface circuits and a microcomputer controller simultaneously incorporated on a single substrate by means of a controlled fabrication process sequence

Electromigration in integrated circuit interconnects studied by X-ray microscopy

Energy Technology Data Exchange (ETDEWEB)

Schneider, G. E-mail: gschnei1@gwdg.de; Denbeaux, G.; Anderson, E.; Bates, W.; Salmassi, F.; Nachimuthu, P.; Pearson, A.; Richardson, D.; Hambach, D.; Hoffmann, N.; Hasse, W.; Hoffmann, K

2003-01-01

To study mass transport phenomena in advanced microelectronic devices with X-rays requires penetration of dielectric and Si layers up to 30 {mu}m thick. X-ray imaging at 1.8 keV photon energy provides a high amplitude contrast between Cu or Al interconnects and dielectric layers and can penetrate through the required thickness. To perform X-ray microscopy at 1.8 keV, a new Ru/Si multilayer was designed for the transmission X-ray microscope XM-1 installed at the Advanced Light Source in Berkeley. The mass flow in a passivated Cu interconnect was studied at current densities up to 10{sup 7} A/cm{sup 2}. In addition, we demonstrated the high material contrast from different elements in integrated circuits with a resolution of about 40 nm.

Electromigration in integrated circuit interconnects studied by X-ray microscopy

CERN Document Server

Schneider, G; Anderson, E; Bates, W; Salmassi, F; Nachimuthu, P; Pearson, A; Richardson, D; Hambach, D; Hoffmann, N; Hasse, W; Hoffmann, K

2003-01-01

To study mass transport phenomena in advanced microelectronic devices with X-rays requires penetration of dielectric and Si layers up to 30 mu m thick. X-ray imaging at 1.8 keV photon energy provides a high amplitude contrast between Cu or Al interconnects and dielectric layers and can penetrate through the required thickness. To perform X-ray microscopy at 1.8 keV, a new Ru/Si multilayer was designed for the transmission X-ray microscope XM-1 installed at the Advanced Light Source in Berkeley. The mass flow in a passivated Cu interconnect was studied at current densities up to 10 sup 7 A/cm sup 2. In addition, we demonstrated the high material contrast from different elements in integrated circuits with a resolution of about 40 nm.

A finite element model for estimating the techno-economic performance of the building-integrated photovoltaic blind

International Nuclear Information System (INIS)

Park, Hyo Seon; Koo, Choongwan; Hong, Taehoon; Oh, Jeongyoon; Jeong, Kwangbok

2016-01-01

Highlights: • A FEM was developed to estimate the techno-economic performance of the BIPB. • The mean absolute percentage error of the FEM_4_-_n_o_d_eBIPB was determined to be 4.54%. • In implementing the BIPB with the GC_i_n_c_l_._S_R_E_C plan, it was superior to the others. • Users can understand the operating mechanism of the proposed model (FEM_4_-_n_o_d_eBIPB). • The proposed model can be extended to any other country in the global environment. - Abstract: This study aims to develop the four-node-based finite element model for estimating the techno-economic performance of the building-integrated photovoltaic blind (FEM_4_-_n_o_d_eBIPB), which can be used by decision-maker in the early design phase. In developing the proposed model, this study uses various research methodologies such as energy simulation, finite element method, life cycle cost analysis, policy analysis, and visual basic application. Compared to the simulation results, the mean absolute percentage error of the proposed model was determined to be 4.54%, showing that the prediction accuracy of the proposed model was found to be excellent. Furthermore, the practical application was conducted for the ‘S’ elementary school facility in South Korea, which allows potential readers to easily and clearly understand the operating mechanism of the proposed model as well as its usability and extendability. The proposed model can be used to conduct the detailed analysis of the techno-economic performance of the BIPB by the type of utilization plan and to determine the optimal strategy for maximizing the value of the investment. Furthermore, the proposed research framework can be extended to any other technology, industry, and country in the global environment.

Study of trace elements distribution in various tissues structures

International Nuclear Information System (INIS)

Kwiatek, W.M.; Marczewska, E.

1994-01-01

Many papers have been written during the past ten years about TE study in cancer and normal tissues describing the use of different methods for detection of trace elements. Concentration of TE depends strongly on the sample measured. However, according to our knowledge, the role of TE in cancerous tissue is still known. Therefore, we propose to perform an experiment which will hopefully given us more information about the relationship between the concentration of elements in different tissues. The developing industry localised near Cracow becomes a serious danger for health of it's inhabitants. The negative influence of the air pollution to the living organisms is seen not only in the nature but also in humans. Therefore we want to analyse the trace element contents in the air. Such investigation will give the information about the pollution level in the City. The pollution has its obvious negative influence to health and toxic element concentration level in blood. It is interesting to check if placenta plays an effective role in foetus protection against toxic metals. In order to study this problem, the trace element analysis of placenta tissues will be done by means of synchrotron microbeam. (author). 1 ref

Finite element modeling simulation-assisted design of integrated microfluidic chips for heavy metal ion stripping analysis

International Nuclear Information System (INIS)

Hong, Ying; Zou, Jianhua; Ge, Gang; Xiao, Wanyue; Shao, Jinjun; Dong, Xiaochen; Gao, Ling

2017-01-01

In this article, a transparent integrated microfluidic device composed of a 3D-printed thin-layer flow cell (3D-PTLFC) and an S-shaped screen-printed electrode (SPE) has been designed and fabricated for heavy metal ion stripping analysis. A finite element modeling (FEM) simulation is employed to optimize the shape of the electrode, the direction of the inlet pipeline, the thin-layer channel height and the sample flow rate to enhance the electron-enrichment efficiency for stripping analysis. The results demonstrate that the S-shaped SPE configuration matches the channel in 3D-PTLFC perfectly for the anodic stripping behavior of the heavy metal ions. Under optimized conditions, a wide linear range of 1–80 µ g l −1 is achieved for Pb 2+ detection with a limit of 0.3 µ g l −1 for the microfluidic device. Thus, the obtained integrated microfluidic device proves to be a promising approach for heavy metal ions stripping analysis with low cost and high performance. (paper)

Study on the Efficient Disintegration of HTGR Fuel Elements by Electrochemical Method

International Nuclear Information System (INIS)

Piao Nan; Chen Ji; Xiao Cuiping; We Mingfen; Che Jing

2014-01-01

The spent fuel elements in High- temperature gas-cooled reactor (HTGR) have a special structure, so the head-end process of the spent fuel reprocessing is different from the process of water reactor spent fuel. The first step of head-end process of the HTGR spent fuel reprocessing process is disintegration of the graphite matrix and separation of the coated fuel particles. Electrochemical method with nitrate solution as an electrolyte for fuel element disintegration has been conducted by the Institute of Nuclear and New Energy Technology in Tsinghua University. This method allows a total disintegration of graphite matrix, while still preserving the integrity of TRISO particles. The influences of the pretreatment methods such as heating oxidation of graphite, hydrothermal and oxidants oxidation were investigated in the present work. The experimental results showed that there were no significant effects on increasing the disintegration rate when pretreatment methods were used ahead of electrochemical disintegration. This phenomenon indicated that the fuel elements which were calcined at 1073 K and pressed under 300 MPa are too compact to be broken by these pretreatment methods. And the electrochemical disintegration is an effective but slow method in breaking the graphite matrix. (author)

Substrate optimization for integrated circuit antennas

OpenAIRE

Alexopoulos, N. G.; Katehi, P. B.; Rutledge, D. B.

1982-01-01

Imaging systems in microwaves, millimeter and submillimeter wave applications employ printed circuit antenna elements. The effect of substrate properties is analyzed in this paper by both reciprocity theorem as well as integral equation approach for infinitesimally short as well as finite length dipole and slot elements. Radiation efficiency and substrate surface wave guidance is studied for practical substrate materials as GaAs, Silicon, Quartz and Duroid.

The Integration of Geotechnologies in the Evaluation of a Wine Cellar Structure through the Finite Element Method

Directory of Open Access Journals (Sweden)

Alberto Villarino

2014-11-01

Full Text Available This paper presents a multidisciplinary methodology to evaluate an underground wine cellar structure using non-invasive techniques. In particular, a historical subterranean wine cellar that presents a complex structure and whose physical properties are unknown is recorded and analyzed using geomatics and geophysics synergies. To this end, an approach that integrates terrestrial laser scanning and ground penetrating radar is used to properly define a finite element-based structural model, which is then used as a decision tool to plan architectural restoration actions. The combination of both techniques implies the registration of external and internal information that eases the construction of structural models. Structural simulation for both stresses and deformations through FEM allowed identifying critical structural elements under great stress or excessive deformations. In this investigation, the ultimate limit state of cracking was considered to determine allowable loads due to the brittle nature of the material. This allowed us to set limit values of loading on the cellar structure in order to minimize possible damage.

Integration and segregation in auditory scene analysis

Science.gov (United States)

Sussman, Elyse S.

2005-03-01

Assessment of the neural correlates of auditory scene analysis, using an index of sound change detection that does not require the listener to attend to the sounds [a component of event-related brain potentials called the mismatch negativity (MMN)], has previously demonstrated that segregation processes can occur without attention focused on the sounds and that within-stream contextual factors influence how sound elements are integrated and represented in auditory memory. The current study investigated the relationship between the segregation and integration processes when they were called upon to function together. The pattern of MMN results showed that the integration of sound elements within a sound stream occurred after the segregation of sounds into independent streams and, further, that the individual streams were subject to contextual effects. These results are consistent with a view of auditory processing that suggests that the auditory scene is rapidly organized into distinct streams and the integration of sequential elements to perceptual units takes place on the already formed streams. This would allow for the flexibility required to identify changing within-stream sound patterns, needed to appreciate music or comprehend speech..

STUDIES OF CHOSEN TOXIC ELEMENTS CONCENTRATION IN MULTIFLOWER BEE HONEY

Directory of Open Access Journals (Sweden)

Ewa Popiela

2011-04-01

Full Text Available 72 544x376 Normal 0 21 false false false  The aim of the study was to determine the bioaccumulation level of chosen toxic elements (Zn, Cu, Pb, As and Cd in multiflower honey collected from Brzeg area. Biological material (honey was mineralized using the microwave technique at an elevated pressure in the microprocessor station of pressure in the type Mars 5. Quantitative analysis of elements (As, Cd, Cu, Pb and Zn was performed by plasma spectrometry method using a Varian ICP-AES apparatus. The presence of toxic elements was determined in examined biological materials. The elements fallowed the fallowing decreasing order with respect to their content of honey: Zn>Cu>Pb>As>Cd. The average concentrations of studied elements observed in multi-flower honey were as follows: 6.24 mg.kg-1 of zinc, 2.75 mg.kg-1 of copper, 0.53, 0.071, 0.042 mg.kg-1of lead, arsenic and cadmium, respectively. Lead was the most problematic in bee honey because its average content exceeded the maximum acceptable concentration. Additionally, this metal concentration was 60% higher in studied samples than allowable standard of lead content.doi:10.5219/134 

A unified architecture of transcriptional regulatory elements

DEFF Research Database (Denmark)

Andersson, Robin; Sandelin, Albin Gustav; Danko, Charles G.

2015-01-01

Gene expression is precisely controlled in time and space through the integration of signals that act at gene promoters and gene-distal enhancers. Classically, promoters and enhancers are considered separate classes of regulatory elements, often distinguished by histone modifications. However...... and enhancers are considered a single class of functional element, with a unified architecture for transcription initiation. The context of interacting regulatory elements and the surrounding sequences determine local transcriptional output as well as the enhancer and promoter activities of individual elements....

Elemental concentration distribution in human fingernails – A 3D study

International Nuclear Information System (INIS)

Pineda-Vargas, C.A.; Mars, J.A.; Gihwala, D.

2012-01-01

The verification of pathologies has normally been based on analysis of blood (serum and plasma), and physiological tissue. Recently, nails and in particular human fingernails have become an important medium for pathological studies, especially those of environmental origin. The analytical technique of PIXE has been used extensively in the analysis of industrial samples and human tissue specimens. The application of the analytical technique to nails has been mainly to bulk samples. In this study we use micro-PIXE and -RBS, as both complementary and supplementary, to determine the elemental concentration distribution of human fingernails of individuals. We report on the 3D quantitative elemental concentration distributions (QECDs) of various elements that include C, N and O as major elements (10–20%), P, S, Cl, K and Ca as minor elements (1–10%) and Fe, Mn, Zn, Ti, Na, Mg, Cu, Ni, Cr, Rb, Br, Sr and Se as trace elements (less than 1%). For PIXE and RBS the specimens were bombarded with a 3 MeV proton beam. To ascertain any correlations in the quantitative elemental concentration distributions, a linear traverse analysis was performed across the width of the nail. Elemental distribution correlations were also obtained.

Maxwell's equations in axisymmetrical geometry: coupling H(curl) finite element in volume and H(div) finite element in surface. The numerical code FuMel

International Nuclear Information System (INIS)

Cambon, S.; Lacoste, P.

2011-01-01

We propose a finite element method to solve the axisymmetric scattering problem posed on a regular bounded domain. Here we shall show how to reduce the initial 3D problem into a truncated sum of 2D independent problems posed into a meridian plane of the object. Each of these problem results in the coupling of a partial differential equation into the interior domain and an integral equation on the surface simulating the free space. Then variational volume and boundary integral formulations of Maxwell's equation on regular surfaces are derived. We introduce some general finite element adapted to cylindrical coordinates and constructed from nodal and mixed finite element both for the interior (volume) and for the integral equation (surface). (authors)

A simple nodal force distribution method in refined finite element meshes

Energy Technology Data Exchange (ETDEWEB)

Park, Jai Hak [Chungbuk National University, Chungju (Korea, Republic of); Shin, Kyu In [Gentec Co., Daejeon (Korea, Republic of); Lee, Dong Won [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Cho, Seungyon [National Fusion Research Institute, Daejeon (Korea, Republic of)

2017-05-15

In finite element analyses, mesh refinement is frequently performed to obtain accurate stress or strain values or to accurately define the geometry. After mesh refinement, equivalent nodal forces should be calculated at the nodes in the refined mesh. If field variables and material properties are available at the integration points in each element, then the accurate equivalent nodal forces can be calculated using an adequate numerical integration. However, in certain circumstances, equivalent nodal forces cannot be calculated because field variable data are not available. In this study, a very simple nodal force distribution method was proposed. Nodal forces of the original finite element mesh are distributed to the nodes of refined meshes to satisfy the equilibrium conditions. The effect of element size should also be considered in determining the magnitude of the distributing nodal forces. A program was developed based on the proposed method, and several example problems were solved to verify the accuracy and effectiveness of the proposed method. From the results, accurate stress field can be recognized to be obtained from refined meshes using the proposed nodal force distribution method. In example problems, the difference between the obtained maximum stress and target stress value was less than 6 % in models with 8-node hexahedral elements and less than 1 % in models with 20-node hexahedral elements or 10-node tetrahedral elements.

Finite element prediction of elastic strains in beryllium compact tension specimens

International Nuclear Information System (INIS)

Guerra, F.; Varma, R.; Bourke, M.

1997-01-01

Three-dimensional finite element (FE) calculations using ABAQUS version 5.5.9 were compared to neutron diffraction measurements of a loaded, pre-cracked beryllium compact tension (CT) specimens. The objective was to validate the FE results with the experimental open-quotes elastic strainclose quotes measurements. Then the FE calculations could be used to study residual stress and other aspects of these problems in the unloaded state and the crack tip stress in the loaded state which is hard to measure experimentally. A graded FE mesh was focused on the regions containing high strain gradients, the smallest elements were approximately 0.5 mm x 0.5 mm x 0.4 mm. A standard 20-node brick element model was complemented by a model with 1/4-point elements at the crack tip. Since the neutron diffraction measurements provided a volume average of approximately a cube of edge 3.0 mm, various averaging (or integrating) techniques were used on the FE results. Several integration schemes showed good agreement with the experimental results

Energy-dispersive X-ray fluorescence study of elemental uptake in ...

Indian Academy of Sciences (India)

The present study suggests that the elemental concentrations in the root soils and leaves of the samples vary from farm to farm, whereby the concentrations of Cu, ... But, the most notable feature of this study is the strikingly similar elemental concentrations in the edible flower part of all samples irrespective of the type of soil.

Experimental research of fuel element reliability

International Nuclear Information System (INIS)

Cech, B.; Novak, J.; Chamrad, B.

1980-01-01

The rate and extent of the damage of the can integrity for fission products is the basic criterion of reliability. The extent of damage is measurable by the fission product leakage into the reactor coolant circuit. An analysis is made of the causes of the fuel element can damage and a model is proposed for testing fuel element reliability. Special experiments should be carried out to assess partial processes, such as heat transfer and fuel element surface temperature, fission gas liberation and pressure changes inside the element, corrosion weakening of the can wall, can deformation as a result of mechanical interactions. The irradiation probe for reliability testing of fuel elements is described. (M.S.)

Three dimensional finite element linear analysis of reinforced concrete structures

International Nuclear Information System (INIS)

Inbasakaran, M.; Pandarinathan, V.G.; Krishnamoorthy, C.S.

1979-01-01

A twenty noded isoparametric reinforced concrete solid element for the three dimensional linear elastic stress analysis of reinforced concrete structures is presented. The reinforcement is directly included as an integral part of the element thus facilitating discretization of the structure independent of the orientation of reinforcement. Concrete stiffness is evaluated by taking 3 x 3 x 3 Gauss integration rule and steel stiffness is evaluated numerically by considering three Gaussian points along the length of reinforcement. The numerical integration for steel stiffness necessiates the conversion of global coordiantes of the Gaussian points to nondimensional local coordinates and this is done by Newton Raphson iterative method. Subroutines for the above formulation have been developed and added to SAP and STAP routines for solving the examples. The validity of the reinforced concrete element is verified by comparison of results from finite element analysis and analytical results. It is concluded that this finite element model provides a valuable analytical tool for the three dimensional elastic stress analysis of concrete structures like beams curved in plan and nuclear containment vessels. (orig.)

Vertical integration in the nuclear fuel cycle

International Nuclear Information System (INIS)

Mommsen, J.T.

1977-01-01

Vertical integration in the nuclear fuel cycle and its contribution to market power of integrated fuel suppliers were studied. The industry subdivision analyzed is the uranium raw materials sector. The hypotheses demonstrated are that (1) this sector of the industry is trending toward vertical integration between production of uranium raw materials and the manufacture of nuclear fuel elements, and (2) this vertical integration confers upon integrated firms a significant market advantage over non-integrated fuel manufacturers. Under microeconomic concepts the rationale for vertical integration is the pursuit of efficiency, and it is beneficial because it increases physical output and decreases price. The Market Advantage Model developed is an arithmetical statement of the relative market power (in terms of price) between non-integrated nuclear fuel manufacturers and integrated raw material/fuel suppliers, based on the concept of the ''squeeze.'' In operation, the model compares net profit and return on sales of nuclear fuel elements between the competitors, under different price and cost circumstances. The model shows that, if integrated and non-integrated competitors sell their final product at identical prices, the non-integrated manufacturer returns a net profit only 17% of the integrated firm. Also, the integrated supplier can price his product 35% below the non-integrated producer's price and still return the same net profit. Vertical integration confers a definite market advantage to the integrated supplier, and the basic source of that advantage is the cost-price differential of the raw material, uranium

Numerical experiment on finite element method for matching data

International Nuclear Information System (INIS)

Tokuda, Shinji; Kumakura, Toshimasa; Yoshimura, Koichi.

1993-03-01

Numerical experiments are presented on the finite element method by Pletzer-Dewar for matching data of an ordinary differential equation with regular singular points by using model equation. Matching data play an important role in nonideal MHD stability analysis of a magnetically confined plasma. In the Pletzer-Dewar method, the Frobenius series for the 'big solution', the fundamental solution which is not square-integrable at the regular singular point, is prescribed. The experiments include studies of the convergence rate of the matching data obtained by the finite element method and of the effect on the results of computation by truncating the Frobenius series at finite terms. It is shown from the present study that the finite element method is an effective method for obtaining the matching data with high accuracy. (author)

Study on the relationship between stress intensity factor and J integral for mixed mode crack with arbitrary inclination based on SBFEM

International Nuclear Information System (INIS)

Zhu, C L; Li, J B; Lin, G; Zhong, H

2010-01-01

The J integral and the stress intensity factor (SIF) K are both important research objects of fracture mechanics, and are often employed to establish criteria for crackpropagation. The relationship between them has always been a research hotspot. In this paper, the SIF can be obtained conveniently by the scaled boundary finite element method (SBFEM) due to the fact that analytical solution can be obtained along the radial direction for stress singularity problems. The J integral can be solved analytically using the formulae between J and K for mixed mode crack with arbitrary inclination in elastic materials. Moreover, the J integral values obtained by this method are more accurate and convenient than by its definition. Factors that affect the accuracy of SIF and J integral, such as the distance between the crack and outer boundary, size of the discretized elements and partition of the domain into super-elements, are examined.

Elastic-Plastic J-Integral Solutions or Surface Cracks in Tension Using an Interpolation Methodology. Appendix C -- Finite Element Models Solution Database File, Appendix D -- Benchmark Finite Element Models Solution Database File

Science.gov (United States)

Allen, Phillip A.; Wells, Douglas N.

2013-01-01

No closed form solutions exist for the elastic-plastic J-integral for surface cracks due to the nonlinear, three-dimensional nature of the problem. Traditionally, each surface crack must be analyzed with a unique and time-consuming nonlinear finite element analysis. To overcome this shortcoming, the authors have developed and analyzed an array of 600 3D nonlinear finite element models for surface cracks in flat plates under tension loading. The solution space covers a wide range of crack shapes and depths (shape: 0.2 less than or equal to a/c less than or equal to 1, depth: 0.2 less than or equal to a/B less than or equal to 0.8) and material flow properties (elastic modulus-to-yield ratio: 100 less than or equal to E/ys less than or equal to 1,000, and hardening: 3 less than or equal to n less than or equal to 20). The authors have developed a methodology for interpolating between the goemetric and material property variables that allows the user to reliably evaluate the full elastic-plastic J-integral and force versus crack mouth opening displacement solution; thus, a solution can be obtained very rapidly by users without elastic-plastic fracture mechanics modeling experience. Complete solutions for the 600 models and 25 additional benchmark models are provided in tabular format.

On diversity performance of two-element coupling element based antenna structure for mobile terminal

DEFF Research Database (Denmark)

Al-Hadi, Azremi Abdullah; Toivanen, Juha; Laitinen, Tommi

2010-01-01

.1 and the diversity gain is equal to 10.2 dB at 99% reliability level using selection combining technique across simulation and both measurement methods. The measurement techniques are compared to show how accurately the diversity performance of a mobile terminal antenna can be estimated.......In wireless communication systems, multipath interference has a significant impact on system design and performance. Fast fading is caused by the coherent summation of one or more echoes from many reflection points reaching the receive antenna. Antenna diversity can be used to mitigate multipath...... fading. The main challenge of antenna diversity in practical application is the integration of multiple antennas on a small ground plane. Two-element antenna structure based on coupling element antenna concept for diversity application has been studied in previous work and it has shown to be feasible...

The Elements of Integration and Lebesgue Measure

CERN Document Server

Bartle, Robert G

2011-01-01

The Wiley Classics Library consists of selected books that have become recognized classics in their respective fields. With these new unabridged and inexpensive editions, Wiley hopes to extend the life of these important works by making them available to future generations of mathematicians and scientists. Currently available in the Series: T. W. Anderson The Statistical Analysis of Time Series T. S. Arthanari & Yadolah Dodge Mathematical Programming in Statistics Emil Artin Geometric Algebra Norman T. J. Bailey The Elements of Stochastic Processes with Applications to the Natural Sciences Rob

Process to separate transuranic elements from nuclear waste

Science.gov (United States)

Johnson, T.R.; Ackerman, J.P.; Tomczuk, Z.; Fischer, D.F.

1989-03-21

A process is described for removing transuranic elements from a waste chloride electrolytic salt containing transuranic elements in addition to rare earth and other fission product elements so the salt waste may be disposed of more easily and the valuable transuranic elements may be recovered for reuse. The salt is contacted with a cadmium-uranium alloy which selectively extracts the transuranic elements from the salt. The waste salt is generated during the reprocessing of nuclear fuel associated with the Integral Fast Reactor (IFR). 2 figs.

Process to separate transuranic elements from nuclear waste

International Nuclear Information System (INIS)

Johnson, T.R.; Ackerman, J.P.; Tomczuk, Z.; Fischer, D.F.

1989-01-01

A process is described for removing transuranic elements from a waste chloride electrolytic salt containing transuranic elements in addition to rare earth and other fission product elements so the salt waste may be disposed of more easily and the valuable transuranic elements may be recovered for reuse. The salt is contacted with a cadmium-uranium alloy which selectively extracts the transuranic elements from the salt. The waste salt is generated during the reprocessing of nuclear fuel associated with the Integral Fast Reactor (IFR). 2 figs

Study on the fragility of structure with several elements in its story. Part 2: structure with ductile elements

International Nuclear Information System (INIS)

Kai, Y.; Fukushima, S.

1995-01-01

The relationship among the fragility of element, that of story and that of system, is examined using the Monte Carlo simulation. In this study, 2-story models whose stories consist of 2 ductile elements are employed. A method is proposed which includes a nonlinear effect into the evaluation of elements capacities. This method does not require the nonlinear MCS, therefore saving computational efforts. Also, a method to estimate the stories and the system fragilities is proposed. (author). 2 refs., 7 figs., 3 tabs

A Comparative Study on Sugeno Integral Approach to Aggregation of Experts' Opinion

International Nuclear Information System (INIS)

Kim, Seong Ho; Kim, Kil Yoo; Kim, Tae Woon

2007-01-01

A multicriteria decision-making (MCDM) problem of preference ranking of various alternatives is common in science and engineering fields. Usually, the MCDM problem is characterized in terms of two factors: relative importance of each evaluation criterion and appropriateness of each alternative. The ranking is determined by a relative degree of appropriateness of decision alternatives. In reality, there are different grades of interaction among decision criteria. One of well-known approaches to aggregation of those two factors is the weighted arithmetic mean (WAM) approach. Here, importance weights for criteria are viewed as probability measures. The weights are linearly aggregated with appropriateness values. In the present work, the main objective is to study an aggregation model with various grades of interactions among the decision elements. The successful applications of fuzzy integral aggregation operators to subjective MCDM problems have been motivating this work. On the basis of λ-fuzzy measures and Sugeno integral (SI), the SI aggregation approach is proposed. Here, interaction among criteria is dealt with λ-fuzzy measures. Aggregation of these measures and appropriateness values is implemented, especially, by the Sugeno integral as one of fuzzy integrals. Aggregated values obtained by the SI approach are viewed as decision maker's pessimistic (or conservative) attitude towards information aggregation, compared to the WAM approach. Firstly, the concepts of the λ-fuzzy measure and the Sugeno fuzzy integral are introduced. Then, as an application of the SI approach, an illustrative example is given

Element Specific Versus Integral Structural and Magnetic Properties of Co:ZnO and Gd:GaN Probed with Hard X-ray Absorption Spectroscopy

Directory of Open Access Journals (Sweden)

Andreas Ney

2010-06-01

Full Text Available Dilute magnetic semiconductors (DMS are envisioned as sources of spin-polarized carriers for future semiconductor devices which simultaneously utilize spin and charge of the carriers. The hope of discovering a DMS with ferromagnetic order up to room temperature still motivates research on suitable DMS materials. Two candidate wide-band gap DMS are Gd:GaN and Co:ZnO. We have used hard X-ray absorption spectroscopy (XAS and in particular X-ray linear dichroism (XLD and X-ray magnetic circular dichroism (XMCD to study both DMS materials with element specificity and compare these findings with results from integral SQUID magnetometry as well as electron paramagnetic resonance (EPR.

Information Environment is an Integral Element of Informational Space in the Process of Professional Development of Future Teacher of Physical Culture

Directory of Open Access Journals (Sweden)

Yuri V. Dragnev

2012-04-01

Full Text Available The article examines information environment as an integral element of information space in the process of professional development of future teacher of physical culture, notes that the strategic objective of the system of higher education is training of competent future teacher of physical culture in the field of information technologies, when information competence and information culture are major components of professionalism in modern information-oriented society

Performance of an optical encoder based on a nondiffractive beam implemented with a specific photodetection integrated circuit and a diffractive optical element.

Science.gov (United States)

Quintián, Fernando Perez; Calarco, Nicolás; Lutenberg, Ariel; Lipovetzky, José

2015-09-01

In this paper, we study the incremental signal produced by an optical encoder based on a nondiffractive beam (NDB). The NDB is generated by means of a diffractive optical element (DOE). The detection system is composed by an application specific integrated circuit (ASIC) sensor. The sensor consists of an array of eight concentric annular photodiodes, each one provided with a programmable gain amplifier. In this way, the system is able to synthesize a nonuniform detectivity. The contrast, amplitude, and harmonic content of the sinusoidal output signal are analyzed. The influence of the cross talk among the annular photodiodes is placed in evidence through the dependence of the signal contrast on the wavelength.

Numerical functional integration method for studying the properties of the physical vacuum

International Nuclear Information System (INIS)

Lobanov, Yu.Yu.

1998-01-01

The new approach to investigate the physical vacuum in quantum theories including its nonperturbative topological structure is discussed. This approach is based on the representation of the matrix element of the evolution operator in Euclidean metrics in a form of the functional integral with a certain measure in the corresponding space and on the use of approximation formulas which we constructed for this kind of integral. No preliminary discretization of space and time is required, as well as no simplifying assumptions like semiclassical approximation, collective excitations, introduction of ''short-time'' propagators, etc. are necessary in this approach. The method allows to use the more preferable deterministic algorithms instead of the traditional stochastic technique. It has been proven that our approach has important advantages over the other known methods, including the higher efficiency of computations. Examples of application of the method to the numerical study of some potential nuclear models and to the computation of the topological susceptibility and the θ-vacua energy are presented. (author)

A numerical study on the structural integrity of self-anchored cable-stayed suspension bridges

Directory of Open Access Journals (Sweden)

Paolo Lonetti

2016-10-01

Full Text Available A generalized numerical model for predicting the structural integrity of self-anchored cable-stayed suspension bridges considering both geometric and material nonlinearities is proposed. The bridge is modeled by means of a 3D finite element approach based on a refined displacement-type finite element approximation, in which geometrical nonlinearities are assumed in all components of the structure. Moreover, nonlinearities produced by inelastic material and second order effects in the displacements are considered for girder and pylon elements, which combine gradual yielding theory with CRC tangent modulus concept. In addition, for the elements of the suspension system, i.e. stays, hangers and main cable, a finite plasticity theory is adopted to fully evaluate both geometric and material nonlinearities. In this framework, the influence of geometric and material nonlinearities on the collapse bridge behavior is investigated, by means of a comparative study, which identifies the effects produced on the ultimate bridge behavior of several sources of bridge nonlinearities involved in the bridge components. Results are developed with the purpose to evaluate numerically the influence of the material and geometric characteristics of self-anchored cable-stayed suspension bridges with respect also to conventional bridge based on cablestayed or suspension schemes

Use of geochemical signatures, including rare earth elements, in mosses and lichens to assess spatial integration and the influence of forest environment

Science.gov (United States)

Gandois, L.; Agnan, Y.; Leblond, S.; Séjalon-Delmas, N.; Le Roux, G.; Probst, A.

2014-10-01

In order to assess the influence of local environment and spatial integration of Trace Metals (TM) by biomonitors, Al, As, Cd, Cr, Cs, Cu, Fe, Mn, Ni, Pb, Sb, Sn, V and Zn and some rare earth element (REE) concentrations have been measured in lichens and mosses collected in three French forest sites located in three distinct mountainous areas, as well as in the local soil and bedrock, and in both bulk deposition (BD) and throughfall (TF). Similar enrichment factors (EF) were calculated using lichens and mosses and local bedrock for most elements, except for Cs, Mn, Ni, Pb, and Cu which were significantly (KW, p leaching (Mn), direct uptake (Ni), or dry deposition dissolution (Pb, Cu, Cs).

Spin chains and Gustafson's integrals

International Nuclear Information System (INIS)

Derkachov, S.E; Manashov, A.N.; Regensburg Univ.

2016-12-01

The Gustafson's integrals are the multidimensional generalization of the classical Mellin-Barnes integrals. We show that some of these integrals arise from relations between matrix elements in the Sklyanin's representation of Separated Variables in the spin chain models. We also present several new integrals.

The branding role that product labelling plays within integrated marketing communication

OpenAIRE

2012-01-01

M.A. This study focuses on empirically determining the branding role that product labelling plays as a strategic element in Integrated Marketing Communication functioning within the food and beverage industry. This research topic was selected for a number of reasons. Firstly, there is a general misconception of the definition of the term Integrated Marketing Communication. Secondly, there is also an emergence of the perception that labelling plays an important role as a strategic element i...

Characterization of Equine Infectious Anemia Virus Integration in the Horse Genome

Directory of Open Access Journals (Sweden)

Qiang Liu

2015-06-01

Full Text Available Human immunodeficiency virus (HIV-1 has a unique integration profile in the human genome relative to murine and avian retroviruses. Equine infectious anemia virus (EIAV is another well-studied lentivirus that can also be used as a promising retro-transfection vector, but its integration into its native host has not been characterized. In this study, we mapped 477 integration sites of the EIAV strain EIAVFDDV13 in fetal equine dermal (FED cells during in vitro infection. Published integration sites of EIAV and HIV-1 in the human genome were also analyzed as references. Our results demonstrated that EIAVFDDV13 tended to integrate into genes and AT-rich regions, and it avoided integrating into transcription start sites (TSS, which is consistent with EIAV and HIV-1 integration in the human genome. Notably, the integration of EIAVFDDV13 favored long interspersed elements (LINEs and DNA transposons in the horse genome, whereas the integration of HIV-1 favored short interspersed elements (SINEs in the human genome. The chromosomal environment near LINEs or DNA transposons potentially influences viral transcription and may be related to the unique EIAV latency states in equids. The data on EIAV integration in its natural host will facilitate studies on lentiviral infection and lentivirus-based therapeutic vectors.

A finite element conjugate gradient FFT method for scattering

Science.gov (United States)

Collins, Jeffery D.; Ross, Dan; Jin, J.-M.; Chatterjee, A.; Volakis, John L.

1991-01-01

Validated results are presented for the new 3D body of revolution finite element boundary integral code. A Fourier series expansion of the vector electric and mangnetic fields is employed to reduce the dimensionality of the system, and the exact boundary condition is employed to terminate the finite element mesh. The mesh termination boundary is chosen such that is leads to convolutional boundary operatores of low O(n) memory demand. Improvements of this code are discussed along with the proposed formulation for a full 3D implementation of the finite element boundary integral method in conjunction with a conjugate gradiant fast Fourier transformation (CGFFT) solution.

Finite element modelling of process-integrated powder coating by radial axial rolling of rings

International Nuclear Information System (INIS)

Frischkorn, J.; Kebriaei, R.; Reese, S.; Moll, H.; Theisen, W.; Husmann, T.; Meier, H.

2011-01-01

The process-integrated powder coating by radial axial rolling of rings represents a new hybrid production technique applied in the manufacturing of large ring-shaped work pieces with functional layers. It is thought to break some limitations that come along with the hot isostatic pressing (HIP) which is used nowadays to apply the powdery layer material onto the rolled substrate ring. Within the new process the compaction of the layer material is integrated into the ring rolling and HIP becomes dispensable. Following this approach the rolling of such compound rings brings up some new challenges. The volume of a solid ring stays nearly constant during the rolling. This behaviour can be exploited to determine the infeed of the rollers needed to reach the desired ring shape. Since volume consistency cannot be guaranteed for the rolling of a compound ring the choice of appropriate infeed of the rollers is still an open question. This paper deals with the finite element (FE) simulation of this new process. First, the material model that is used to describe the compaction of the layer material is shortly reviewed. The main focus of the paper is then put on a parameterized FE ring rolling model that incorporates a control system in order to stabilize the process. Also the differences in the behaviour during the rolling stage between a compound and a solid ring will be discussed by means of simulation results.

Study of the integration of distributed generation systems in the grid: application in micro-grids

International Nuclear Information System (INIS)

Gaztanaga Arantzamendi, H.

2006-12-01

The present PhD deals with an original micro-grid concept and its application as a Renewable Energy Source's (RES) grid integration scheme. This micro-grid is composed of RES generators as well as support systems that incorporate additional functionalities in order to improve RES integration into the grid. According to this concept, two practical micro-grid applications have been studied in detail: a residential micro-grid and a wind farm supported by DFACTS systems (STATCOM and DVR). In both applications, the control structures which are implemented at different levels and applied to the different micro-grid elements have been developed, analyzed by means of off-line simulations and finally validated in real-time conditions with physical reduced-scale prototypes. (author)

A governance model for integrated primary/secondary care for the health-reforming first world - results of a systematic review.

Science.gov (United States)

Nicholson, Caroline; Jackson, Claire; Marley, John

2013-12-20

Internationally, key health care reform elements rely on improved integration of care between the primary and secondary sectors. The objective of this systematic review is to synthesise the existing published literature on elements of current integrated primary/secondary health care. These elements and how they have supported integrated healthcare governance are presented. A systematic review of peer-reviewed literature from PubMed, MEDLINE, CINAHL, the Cochrane Library, Informit Health Collection, the Primary Health Care Research and Information Service, the Canadian Health Services Research Foundation, European Foundation for Primary Care, European Forum for Primary Care, and Europa Sinapse was undertaken for the years 2006-2012. Relevant websites were also searched for grey literature. Papers were assessed by two assessors according to agreed inclusion criteria which were published in English, between 2006-2012, studies describing an integrated primary/secondary care model, and had reported outcomes in care quality, efficiency and/or satisfaction. Twenty-one studies met the inclusion criteria. All studies evaluated the process of integrated governance and service delivery structures, rather than the effectiveness of services. They included case reports and qualitative data analyses addressing policy change, business issues and issues of clinical integration. A thematic synthesis approach organising data according to themes identified ten elements needed for integrated primary/secondary health care governance across a regional setting including: joint planning; integrated information communication technology; change management; shared clinical priorities; incentives; population focus; measurement - using data as a quality improvement tool; continuing professional development supporting joint working; patient/community engagement; and, innovation. All examples of successful primary/secondary care integration reported in the literature have focused on a combination

The SMART Theory and Modeling Team: An Integrated Element of Mission Development and Science Analysis

Science.gov (United States)

Hesse, Michael; Birn, J.; Denton, Richard E.; Drake, J.; Gombosi, T.; Hoshino, M.; Matthaeus, B.; Sibeck, D.

2005-01-01

When targeting physical understanding of space plasmas, our focus is gradually shifting away from discovery-type investigations to missions and studies that address our basic understanding of processes we know to be important. For these studies, theory and models provide physical predictions that need to be verified or falsified by empirical evidence. Within this paradigm, a tight integration between theory, modeling, and space flight mission design and execution is essential. NASA's Magnetospheric MultiScale (MMS) mission is a pathfinder in this new era of space research. The prime objective of MMS is to understand magnetic reconnection, arguably the most fundamental of plasma processes. In particular, MMS targets the microphysical processes, which permit magnetic reconnection to operate in the collisionless plasmas that permeate space and astrophysical systems. More specifically, MMS will provide closure to such elemental questions as how particles become demagnetized in the reconnection diffusion region, which effects determine the reconnection rate, and how reconnection is coupled to environmental conditions such as magnetic shear angles. Solutions to these problems have remained elusive in past and present spacecraft missions primarily due to instrumental limitations - yet they are fundamental to the large-scale dynamics of collisionless plasmas. Owing to the lack of measurements, most of our present knowledge of these processes is based on results from modern theory and modeling studies of the reconnection process. Proper design and execution of a mission targeting magnetic reconnection should include this knowledge and have to ensure that all relevant scales and effects can be resolved by mission measurements. The SMART mission has responded to this need through a tight integration between instrument and theory and modeling teams. Input from theory and modeling is fed into all aspects of science mission design, and theory and modeling activities are tailored

The natural gas as integration element in Latin America

International Nuclear Information System (INIS)

Morales, Maria Elizabeth; Dutra, Luis Eduardo; Rosa, Luiz Pinguelli

1999-01-01

The article discusses the following global aspects of natural gas development: natural gas and worldwide energetic integration; natural gas consumption rates in the world; natural gas industry development in Latin America; and natural gas industry in Brazil. The article concludes that the natural gas can integrate Latin-american economies since the Governments adopt coherent energetic politicians articulated to each other

Cumulative and competitive effects of chemical elements on nuclear glass alteration

International Nuclear Information System (INIS)

Arena, Helene

2016-01-01

This work takes place in the context of the long-term behavior of nuclear glasses under repository conditions. The main objective is to identify, understand and compare the effects of some chemical elements present in the glass composition and/or in the repository media (Zn, Mg, Ni, Co, Fe, Ca, Gd, Ce, K, Cs, Cr and Ag) on the processes involved in glass alteration by water. The cumulative or competitive nature of the effects of these chemical elements was determined. To reach this goal, a 6 oxides simple glass (ISG) has been altered for more than 500 days in a solution containing one or more of the chemical elements of interest. The results indicate that Zn, Mg, Ni, Co and Fe elements increase glass alteration forming secondary phases with the same structure and stoichiometry (tri-octahedral smectites). To form, these silicates consume chemical elements (Si, Al) from the environment and induce a pH decrease until a limiting value of pH. Beyond this pH the precipitation of secondary phases is inhibited and these chemical elements can be integrated into the gel, replacing Ca whose solubility increases at lower pH. As long as they form secondary phases, the effects of these elements are cumulative. Rare earths Gd and Ce also increase glass alteration forming secondary phases but their effects are lower as they contain less silicon. These elements are not integrated in the gel. Chromium increases glass alteration by precipitating with Ca and leading to a less protective gel, depleted in Ca. Silver precipitates as AgCl and has no effect on the alteration of the glass. The chemical elements K, Cs and Ca limit glass alteration by integrating into the gel and slowing down the transport phenomena therein. This integration is competitive: the order of integration (quantity and effectiveness glass alteration limitation) is the following Ca≥≥Cs≥K. Thus, the increase of glass alteration may be proportional to the quantity of elements promoting the precipitation of

Advancements in the behavioral modeling of fuel elements and related structures

International Nuclear Information System (INIS)

Billone, M.C.; Montgomery, R.O.; Rashid, Y.R.; Head, J.L.

1989-01-01

An important aspect of the design and analysis of nuclear reactors is the ability to predict the behavior of fuel elements in the adverse environment of a reactor system. By understanding the thermomechanical behavior of the different materials which constitute a nuclear fuel element, analysis and predictions can be made regarding the integrity and reliability of fuel element designs. The SMiRT conference series, through the division on fuel elements and the post-conference seminars on fuel element modeling, provided technical forums for the international participation in the exchange of knowledge concerning the thermomechanical modeling of fuel elements. This paper discusses the technical advances in the behavioral modeling of fuel elements presented at the SMiRT conference series since its inception in 1971. Progress in the areas of material properties and constitutive relationships, modeling methodologies, and integral modeling approaches was reviewed and is summarized in light of their impact on the thermomechanical modeling of nuclear fuel elements. 34 refs., 5 tabs

Influence of panel fastening on the acoustic performance of light-weight building elements: Study by sound transmission and laser scanning vibrometry

Science.gov (United States)

Roozen, N. B.; Muellner, H.; Labelle, L.; Rychtáriková, M.; Glorieux, C.

2015-06-01

Structural details and workmanship can cause considerable differences in sound insulation properties of timber frame partitions. In this study, the influence of panel fastening is investigated experimentally by means of standardized sound reduction index measurements, supported by detailed scanning laser Doppler vibrometry. In particular the effect of the number of screws used to fasten the panels to the studs, and the tightness of the screws, is studied using seven different configurations of lightweight timber frame building elements. In the frequency range from 300 to 4000 Hz, differences in the weighted sound reduction index RW as large as 10 dB were measured, suggesting that the method of fastening can have a large impact on the acoustic performance of building elements. Using the measured vibrational responses of the element, its acoustic radiation efficiency was computed numerically by means of a Rayleigh integral. The increased radiation efficiency partly explains the reduced sound reduction index. Loosening the screws, or reducing the number of screws, lowers the radiation efficiency, and significantly increases the sound reduction index of the partition.

Phylogeographic diversity and mosaicism of the Helicobacter pylori tfs integrative and conjugative elements.

Science.gov (United States)

Delahay, Robin M; Croxall, Nicola J; Stephens, Amberley D

2018-01-01

The genome of the gastric pathogen Helicobacter pylori is characterised by considerable variation of both gene sequence and content, much of which is contained within three large genomic islands comprising the cag pathogenicity island ( cag PAI) and two mobile integrative and conjugative elements (ICEs) termed tfs3 and tfs4 . All three islands are implicated as virulence factors, although whereas the cag PAI is well characterised, understanding of how the tfs elements influence H. pylori interactions with different human hosts is significantly confounded by limited definition of their distribution, diversity and structural representation in the global H. pylori population. To gain a global perspective of tfs ICE population dynamics we established a bioinformatics workflow to extract and precisely define the full tfs pan-gene content contained within a global collection of 221 draft and complete H. pylori genome sequences. Complete (ca. 35-55kbp) and remnant tfs ICE clusters were reconstructed from a dataset comprising > 12,000 genes, from which orthologous gene complements and distinct alleles descriptive of different tfs ICE types were defined and classified in comparative analyses. The genetic variation within defined ICE modular segments was subsequently used to provide a complete description of tfs ICE diversity and a comprehensive assessment of their phylogeographic context. Our further examination of the apparent ICE modular types identified an ancient and complex history of ICE residence, mobility and interaction within particular H. pylori phylogeographic lineages and further, provided evidence of both contemporary inter-lineage and inter-species ICE transfer and displacement. Our collective results establish a clear view of tfs ICE diversity and phylogeographic representation in the global H. pylori population, and provide a robust contextual framework for elucidating the functional role of the tfs ICEs particularly as it relates to the risk of gastric

Assessment of the integrity of degraded steam generator tube by the use of heterogeneous finite element method

International Nuclear Information System (INIS)

Duan, X.; Kozluk, M.; Pagan, S.; Mills, B.

2006-01-01

Steam generator tubes at Ontario Power Generation (OPG) have been experiencing a variety of degradations such as pitting, fretting wear, erosion-corrosion, thinning and denting. To assist with steam generator life cycle management, OPG has developed Fitness-For-Service Guidelines (FFSG) for steam generator tubes. The FFSG are intended to provide standard acceptance criteria and evaluation procedures for assessing the condition of steam generator tubes for structural integrity, operational leak rate, and consequential leakage during an upset or abnormal event. Based on inspection results in conjunction with representative, postulated distributions of flaws in the un-inspected tubes, the FFSG provide an acceptable method of satisfying the intent of CSA-N285.4 and justifying the continued operation of degraded steam generator tubes. Some non-mandatory empirical axial and circumferential flaw models are also provided in the FFSG for structural integrity assessments. The test data from the OPG Steam Generator Tube Test Program (SGTTP) showed that the FFSG axial flaw model is conservative for a wide range of defect morphologies. A defect-specific axial flaw model was proposed for lattice-bar fret defects in I800 tubes by utilizing the SGTTP database of extensive test results. A defect-specific flaw model for outer diameter (OD) pitting and inner diameter (ID) intergranular attack in Monel 400 tubes was also developed using the SGTTP test data. More tests have been scheduled to support the development of defect specific models for axial flaws (OD cracks or ID laps) in Monel 400 and to supplement the database for Monel 400 pits. This paper explores the use of simulated testing for use in developing defect specific flaw models to reduce the amount of expensive tests. The Heterogeneous Finite Element Model (HFEM) has been developed and successfully applied to predict the failure behaviour of ductile metals under various deformation modes, i.e. plane stress, plane strain and

Using Game Elements to Increase Student Engagement in Course Assignments

Science.gov (United States)

Armier, David Des, Jr.; Shepherd, Craig E.; Skrabut, Stan

2016-01-01

Gamification incorporates game-elements in non-gaming situations to enhance student engagement and desired behavior. This study examined participant's willingness to take part in gamified activities where reward systems were not directly tied to course grades. Participants enrolled in a technology integration course for preservice teachers, were…

Preparation and study of elemental californium-249

International Nuclear Information System (INIS)

Noe, M.; Peterson, J.R.

1975-01-01

Bulk samples of 249 Cf metal were prepared on the 10 μg scale via the Li metal vapor reduction of 249 CfF 3 . Above about 725 0 C elemental Cf exhibits a face-centered cubic (fcc) structure with an average, room-temperature lattice parameter of 5.75(1)A. Between about 600 0 C and 725 0 C, the stable form of Cf metal is another fcc structure with an average, room-temperature lattice parameter of 4.94(1)A. Below 600 0 C metallic Cf exhibits a double hexagonal closest packed (dhcp) structure with average, room temperature lattice parameters of a 0 = 3.39(1)A and c 0 = 11.01(5)A. By comparison of the metallic radii calculated for these three forms with those of the receding transuranium elements, it is suggested that the two, lower temperature modifications represent Cf with a metallic valence of three, while the highest temperature form represents a metallic valence of two. Although the data reported here are from the most complete study to date of elemental Cf, the limitations accompanying such microscale research are duly noted. (U.S.)

Integrated Food studies education and research:

DEFF Research Database (Denmark)

Hansen, Mette Weinreich; Hansen, Stine Rosenlund

2018-01-01

The research group Foodscapes Innovation and Networks has addressed integrated food studies issues in re-search and education since 2010. Based on experiences in the group, this paper aims at discussing the chal-lenges, learning outcomes and potentials for pushing an integrated thinking into rese......The research group Foodscapes Innovation and Networks has addressed integrated food studies issues in re-search and education since 2010. Based on experiences in the group, this paper aims at discussing the chal-lenges, learning outcomes and potentials for pushing an integrated thinking...... into research and education. It also addresses the challenges in integration when the methodological approaches and theoretical frameworks chosen are ontologically and epistemologically different. A discussion of the limitations of integration is thus also part of the paper. The conceptual framework...... of ontonorms (Mol, 2013) is suggested as a common point of departure for a further development of integration. This is suggested relevant due to the fact that it forces different traditions to reflect their own value-related basis and discuss implications of this approach in a broader sense. The common values...

Fuel element concept for long life high power nuclear reactors

Science.gov (United States)

Mcdonald, G. E.; Rom, F. E.

1969-01-01

Nuclear reactor fuel elements have burnups that are an order of magnitude higher than can currently be achieved by conventional design practice. Elements have greater time integrated power producing capacity per unit volume. Element design concept capitalizes on known design principles and observed behavior of nuclear fuel.

Effects of finite element formulation on optimal plate and shell structural topologies

CSIR Research Space (South Africa)

Long, CS

2009-09-01

Full Text Available , and the other is a 4-node element accounting for in-plane (drilling) rotations. Plate elements selected for evaluation include the discrete Kirchhoff quadrilateral (DKQ) element and two Mindlin–Reissner-based elements, one employing selective reduced integration...

Distribution and Genetic Characteristics of SXT/R391 Integrative Conjugative Elements in Shewanella spp. From China

Directory of Open Access Journals (Sweden)

Yujie Fang

2018-05-01

Full Text Available The genus Shewanella consists of facultatively anaerobic Gram-negative bacteria, which are regarded as potential agents of food contamination and opportunistic human pathogens. Information about the distribution and genetic characteristics of SXT/R391 integrative conjugative elements (ICEs in Shewanella species is limited. Here, 91 Shewanella strains collected from diverse samples in China were studied for the presence of SXT/R391 ICEs. Three positive strains, classified as Shewanella upenei, were obtained from patients and water from a local mill. In light of their close clonal relationships and high sequence similarity, a representative ICE was selected and designated ICESupCHN110003. The BLASTn searches against GenBank showed that ICEVchBan5 was most closely related to ICESupCHN110003, with the coverage of 76% and identity of 99%. The phylogenetic tree of concatenated core genes demonstrated that ICESupCHN110003 formed a distinct branch outside the cluster comprising ICEValA056-1, ICEPmiCHN2410, and ICEPmiChn1. Comparison of the genetic structures revealed that ICESupCHN110003 encoded uncommon genes in hotspots, such as specific type III restriction-modification system, conferring adaptive functions to the host. Based on the low coverage in the sequence analysis, independent clade in the phylogenetic tree, and unique inserted fragments in hotspots, ICESupCHN110003 represented a novel SXT/R391 element, which widened the list of ICEs. Furthermore, the antibiotic resistance genes floR, strA, strB, and sul2 in ICESupCHN110003 and resistance to multiple drugs of the positive isolates were detected. A cross-species transfer capability of the SXT/R391 ICEs was also discovered. In summary, it is necessary to reinforce continuous surveillance of SXT/R391 ICEs in the genus Shewanella.

A study on some trace elements in Chilean seafood

Energy Technology Data Exchange (ETDEWEB)

Gras, N; Munoz, L; Thieck, M; Hurtado, S [Comision Chilena de Energia Nuclear, Santiago (Chile). Lab. of Activation Analysis

1993-03-01

Levels of essential and toxic trace elements in six marine species greatly in demand in the international market (canned pink clams, razor clams, clams, king crab, sardines, and frozen albacore tuna fish) were studied. A special laboratory adequately equipped for handling and preparing biological materials, is described. The elements As, Br, Na, Se, Hg, Cr, Fe, Zn and Rb were determined by INAA, while copper and cadmium content were determined using RNAA. Significant differences were found on comparing the contents of some toxic elements in mollusk and other samples of marine food. Various certified reference materials (CRMs) of the IAEA, NIST and NIES were analyzed for quality assurance purposes. (author) 11 refs.; 1 fig.; 1 tab.

A study on some trace elements in Chilean seafood

International Nuclear Information System (INIS)

Gras, N.; Munoz, L.; Thieck, M.; Hurtado, S.

1993-01-01

Levels of essential and toxic trace elements in six marine species greatly in demand in the international market (canned pink clams, razor clams, clams, king crab, sardines, and frozen albacore tuna fish) were studied. A special laboratory adequately equipped for handling and preparing biological materials, is described. The elements As, Br, Na, Se, Hg, Cr, Fe, Zn and Rb were determined by INAA, while copper and cadmium content were determined using RNAA. Significant differences were found on comparing the contents of some toxic elements in mollusk and other samples of marine food. Various certified reference materials (CRMs) of the IAEA, NIST and NIES were analyzed for quality assurance purposes. (author) 11 refs.; 1 fig.; 1 tab

Finite element model updating of concrete structures based on imprecise probability

Science.gov (United States)

Biswal, S.; Ramaswamy, A.

2017-09-01

Imprecise probability based methods are developed in this study for the parameter estimation, in finite element model updating for concrete structures, when the measurements are imprecisely defined. Bayesian analysis using Metropolis Hastings algorithm for parameter estimation is generalized to incorporate the imprecision present in the prior distribution, in the likelihood function, and in the measured responses. Three different cases are considered (i) imprecision is present in the prior distribution and in the measurements only, (ii) imprecision is present in the parameters of the finite element model and in the measurement only, and (iii) imprecision is present in the prior distribution, in the parameters of the finite element model, and in the measurements. Procedures are also developed for integrating the imprecision in the parameters of the finite element model, in the finite element software Abaqus. The proposed methods are then verified against reinforced concrete beams and prestressed concrete beams tested in our laboratory as part of this study.

Comparison of closed-form and finite-element solutions of thick laminated anisotropic rectangular plates

Energy Technology Data Exchange (ETDEWEB)

Reddy, J N; Chao, W C [Virginia Polytechnic Inst. and State Univ., Blacksburg (USA). Dept. of Engineering Science and Mechanics

1981-04-01

In this study the effects of reduced integration, mesh size, and element type (i.e. linear or quadratic) on the accuracy of a penalty-finite element based on the theory governing thick, laminated, anisotropic composite plates are investigated. In order to assess the accuracy of the present finite element, exact closed-form solutions are developed for cross-ply and antisymmetric angle-ply rectangular plates simply supported and subjected to sinusoidally distributed mechanical and/or thermal loadings, and free vibration.

A time-domain finite element boundary integral approach for elastic wave scattering

Science.gov (United States)

Shi, F.; Lowe, M. J. S.; Skelton, E. A.; Craster, R. V.

2018-04-01

The response of complex scatterers, such as rough or branched cracks, to incident elastic waves is required in many areas of industrial importance such as those in non-destructive evaluation and related fields; we develop an approach to generate accurate and rapid simulations. To achieve this we develop, in the time domain, an implementation to efficiently couple the finite element (FE) method within a small local region, and the boundary integral (BI) globally. The FE explicit scheme is run in a local box to compute the surface displacement of the scatterer, by giving forcing signals to excitation nodes, which can lie on the scatterer itself. The required input forces on the excitation nodes are obtained with a reformulated FE equation, according to the incident displacement field. The surface displacements computed by the local FE are then projected, through time-domain BI formulae, to calculate the scattering signals with different modes. This new method yields huge improvements in the efficiency of FE simulations for scattering from complex scatterers. We present results using different shapes and boundary conditions, all simulated using this approach in both 2D and 3D, and then compare with full FE models and theoretical solutions to demonstrate the efficiency and accuracy of this numerical approach.

Studies on absorption coefficient near edge of multi elements

International Nuclear Information System (INIS)

Eisa, M.H.; Shen, H.; Yao, H.Y.; Mi, Y.; Zhou, Z.Y.; Hu, T.D.; Xie, Y.N.

2005-01-01

X-ray absorption near edge structure (XANES) was used to study the near edge mass-absorption coefficients of seven elements, such as, Ti, V, Fe, Co, Ni, Cu and Zn. It is well known that, on the near edge absorption of element, when incident X-ray a few eV change can make the absorption coefficient an order magnitude alteration. So that, there are only a few points mass-absorption coefficient at the near edge absorption and that always average value in published table. Our results showed a wide range of data, the total measured data of mass-absorption coefficient of the seven elements was about 505. The investigation confirmed that XANES is useful technique for multi-element absorption coefficient measurement. Details of experimental methods and results are given and discussed. The experimental work has been performed at Beijing Synchrotron Radiation Facility. The measured values were compared with the published data. Good agreement between experimental results and published data is obtained

Studies on absorption coefficient near edge of multi elements

Science.gov (United States)

Eisa, M. H.; Shen, H.; Yao, H. Y.; Mi, Y.; Zhou, Z. Y.; Hu, T. D.; Xie, Y. N.

2005-12-01

X-ray absorption near edge structure (XANES) was used to study the near edge mass-absorption coefficients of seven elements, such as, Ti, V, Fe, Co, Ni, Cu and Zn. It is well known that, on the near edge absorption of element, when incident X-ray a few eV change can make the absorption coefficient an order magnitude alteration. So that, there are only a few points mass-absorption coefficient at the near edge absorption and that always average value in published table. Our results showed a wide range of data, the total measured data of mass-absorption coefficient of the seven elements was about 505. The investigation confirmed that XANES is useful technique for multi-element absorption coefficient measurement. Details of experimental methods and results are given and discussed. The experimental work has been performed at Beijing Synchrotron Radiation Facility. The measured values were compared with the published data. Good agreement between experimental results and published data is obtained.

Application of FIRE for the calculation of photon matrix elements

Indian Academy of Sciences (India)

to evaluate the two-loop Feynman diagrams for the photon matrix element of the ... sum of scalar Feynman integrals to a linear combination of a few master integrals. .... Then, FIRE is used to express these scalar integrals as a linear combi-.

A governance model for integrated primary/secondary care for the health-reforming first world – results of a systematic review

Science.gov (United States)

2013-01-01

Background Internationally, key health care reform elements rely on improved integration of care between the primary and secondary sectors. The objective of this systematic review is to synthesise the existing published literature on elements of current integrated primary/secondary health care. These elements and how they have supported integrated healthcare governance are presented. Methods A systematic review of peer-reviewed literature from PubMed, MEDLINE, CINAHL, the Cochrane Library, Informit Health Collection, the Primary Health Care Research and Information Service, the Canadian Health Services Research Foundation, European Foundation for Primary Care, European Forum for Primary Care, and Europa Sinapse was undertaken for the years 2006–2012. Relevant websites were also searched for grey literature. Papers were assessed by two assessors according to agreed inclusion criteria which were published in English, between 2006–2012, studies describing an integrated primary/secondary care model, and had reported outcomes in care quality, efficiency and/or satisfaction. Results Twenty-one studies met the inclusion criteria. All studies evaluated the process of integrated governance and service delivery structures, rather than the effectiveness of services. They included case reports and qualitative data analyses addressing policy change, business issues and issues of clinical integration. A thematic synthesis approach organising data according to themes identified ten elements needed for integrated primary/secondary health care governance across a regional setting including: joint planning; integrated information communication technology; change management; shared clinical priorities; incentives; population focus; measurement – using data as a quality improvement tool; continuing professional development supporting joint working; patient/community engagement; and, innovation. Conclusions All examples of successful primary/secondary care integration reported in

Theoretical analysis of the temperature changes and resultant loss of fuel integrity in the IEA-R1 research reactor fuel elements following a loss of coalant accident

International Nuclear Information System (INIS)

Garone, J.G.M.

1983-01-01

The IEA-R1 core following a loss of coolant accident (LOCA) is analysed. THe AIRLOCA code was used to calculate fuel temperatures, heat generation due to fission product decay and convective and radiative heat transfer from the fuel elements to the surrounding air both during and following the loss of coolant. The influence of certain critical parameters, such as log time, specific power was studied in detail. Representative results are presented and suggestions made to ensure that fuel integrity is maintained following a LOCA. (Author) [pt

Preparation and intercalation study of ternary transition elements chalcogenides AxMXn

International Nuclear Information System (INIS)

Kassem, M.

1999-01-01

The crystalline powders of transition elements chalcogenides have been prepared by solid-solid reaction method starting from elemental powders in evacuated and sealed quartz tubes heated at various temperatures depending on the compound to be prepared. The structures and composition of the obtained compounds have been studied by X-ray diffraction and X-ray fluorescence techniques. Intercalation compounds Co x MX 2 have been obtained by heating the powder with elemental cobalt at 500 Centigrade. The results of the structural studies show that the intercalation of cobalt is a regular phenomena and the cobalt atoms play the role of staples for the layers constructing the crystalline structure of starting materials. This stapling phenomena is accompanied by changes in distance between the layers and therefore changes in the length of bonds between the elements of compound. The changes in the length of bonds have been confirmed by the results of FTIR studies.(author)

Blast response of curved carbon/epoxy composite panels: Experimental study and finite-element analysis

International Nuclear Information System (INIS)

Phadnis, V A; Roy, A; Silberschmidt, V V; Kumar, P; Shukla, A

2013-01-01

Experimental and numerical studies were conducted to understand the effect of plate curvature on blast response of carbon/epoxy composite panels. A shock-tube system was utilized to impart controlled shock loading to quasi-isotropic composite panels with differing range of radii of curvatures. A 3D Digital Image Correlation (DIC) technique coupled with high-speed photography was used to obtain out-of-plane deflection and velocity, as well as in-plane strain on the back face of the panels. Macroscopic post-mortem analysis was performed to compare yielding and deformation in these panels. A dynamic computational simulation that integrates fluid-structure interaction was conducted to evaluate the panel response in general purpose finite-element software ABAQUS/Explicit. The obtained numerical results were compared to the experimental data and showed a good correlation

Didactics of Spanish Language and its Literature teaching, the main integrative discipline: view from Study Plan E

Directory of Open Access Journals (Sweden)

Marialina Ana García Escobio

2018-03-01

Full Text Available The main integrative discipline, a typical term to the Cuban Higher Education, is today object of study, in the new study plan E, of a reconceptualization to achieve more efficiently the integration of the academic, the researching, the working, and the extensional fields. The article aims at analyzing the main theoretical elements that are considered in the national literature on this issue, and the importance of this discipline for the professionals education from the Spanish and Literature studies. The main methods used were documental analysis and systematization, and survey was administered with the technique of focal groups. This all led to show the need of the discipline for permanent attention in the Curriculum for it to constitute the backbone of the formation process of the pedagogical and professional competence. The conclusion is that this discipline allows the integration of the student’s education in a coherent and systematic way, from the care of the language and the appreciation of literature as part of the professional identity and authority.

Analysis of the ATR fuel element swaging process

International Nuclear Information System (INIS)

Richins, W.D.; Miller, G.K.

1995-12-01

This report documents a detailed evaluation of the swaging process used to connect fuel plates to side plates in Advanced Test Reactor (ATR) fuel elements. The swaging is a mechanical process that begins with fitting a fuel plate into grooves in the side plates. Once a fuel plate is positioned, a lip on each of two side plate grooves is pressed into the fuel plate using swaging wheels to form the joints. Each connection must have a specified strength (measured in terms, of a pullout force capacity) to assure that these joints do not fail during reactor operation. The purpose of this study is to analyze the swaging process and associated procedural controls, and to provide recommendations to assure that the manufacturing process produces swaged connections that meet the minimum strength requirement. The current fuel element manufacturer, Babcock and Wilcox (B ampersand W) of Lynchburg, Virginia, follows established procedures that include quality inspections and process controls in swaging these connections. The procedures have been approved by Lockheed Martin Idaho Technologies and are designed to assure repeatability of the process and structural integrity of each joint. Prior to July 1994, ATR fuel elements were placed in the Hydraulic Test Facility (HTF) at the Idaho National Engineering Laboratory (AGNAIL), Test Reactor Area (TRA) for application of Boehmite (an aluminum oxide) film and for checking structural integrity before placement of the elements into the ATR. The results presented in this report demonstrate that the pullout strength of the swaged connections is assured by the current manufacturing process (with several recommended enhancements) without the need for- testing each element in the HTF

Live-Load Testing Application Using a Wireless Sensor System and Finite-Element Model Analysis of an Integral Abutment Concrete Girder Bridge

Directory of Open Access Journals (Sweden)

Robert W. Fausett

2014-01-01

Full Text Available As part of an investigation on the performance of integral abutment bridges, a single-span, integral abutment, prestressed concrete girder bridge near Perry, Utah was instrumented for live-load testing. The live-load test included driving trucks at 2.24 m/s (5 mph along predetermined load paths and measuring the corresponding strain and deflection. The measured data was used to validate a finite-element model (FEM of the bridge. The model showed that the integral abutments were behaving as 94% of a fixed-fixed support. Live-load distribution factors were obtained using this validated model and compared to those calculated in accordance to recommended procedures provided in the AASHTO LRFD Bridge Design Specifications (2010. The results indicated that if the bridge was considered simply supported, the AASHTO LRFD Specification distribution factors were conservative (in comparison to the FEM results. These conservative distribution factors, along with the initial simply supported design assumption resulted in a very conservative bridge design. In addition, a parametric study was conducted by modifying various bridge properties of the validated bridge model, one at a time, in order to investigate the influence that individual changes in span length, deck thickness, edge distance, skew, and fixity had on live-load distribution. The results showed that the bridge properties with the largest influence on bridge live-load distribution were fixity, skew, and changes in edge distance.

Study on simplified estimation of J-integral under thermal loading

International Nuclear Information System (INIS)

Takahashi, Y.

1993-01-01

. On the other hand, a method utilizing the stress intensity factor (SIF) solutions for crack surface loading, called influence function method, has been developed for linear elastic problem. This method is very versatile in the sense that it can be applied for estimating the SIF for arbitrary loading using , the stress distribution for an identical but uncracked body, which is much easier to analyze. Therefore utilization of this method in the nonlinear thermal stress problem should be promising if succeeded. Sakon and Kaneko showed that purely elastic solutions give reasonably good estimates of J-integral even for elastic-plastic cracked bodies subjected to deformation controlled loading. On the other hand, Budden studied procedures for estimating J-integral based on stress/strain distribution obtained by elastic-plastic analysis for uncracked bodies. To assess the validity of these approaches as well as their variations in a broader range of conditions, detailed finite element analysis for cracked and uncracked cylinders was conducted in this study

The Integrated Early Childhood Curriculum.

Science.gov (United States)

Krogh, Suzanne

This textbook provides an outline of an integrated curriculum for early childhood education. Part 1 discusses the human element in school: the child and the teacher and child development. Part 2 contains the curriculum itself and covers the subjects of language, mathematics, science, social studies, art, music, and movement. Guidelines provide…

Study of mobilization and speciation of trace elements in coal pyrolysis

International Nuclear Information System (INIS)

Ting, B.T.G.

1979-01-01

Various types of coal contain high levels of a number of trace elements. Little is known of the fates of these trace elements during the conversion of coal to liquid and gaseous products. Studies were undertaken of mobilization and speciation of trace elements in coal pyrolysis, one of the major coal conversion processes. The bituminous coal was pyrolyzed to produce liquid and gaseous products. The pyrolysis products were collected in traps in an inert gas stream. In addition mildly hydrogenated coal was prepared by mixing with tetralin, a hydrogen donor solvent, at boiling temperature. In order to characterize each element specifically during pyrolysis, base samples of coal and mildly hydrogenated coal (H-coal) were spiked with heavy metal sulfides, trace metals bound to partially oxidized coal (coal humates), and halide salts prior to carrying out pyrolysis. Eight elements were investigated in this research. They are As, Br, Cl, Co, Cr, Mn, Se, and V. Pre-spiked hydrogenated coal, i.e., pulverized coal spiked with halide salts and heavy metal sulfides then hydrogenated with tetralin, was prepared and studied for the fates of these elements during pyrolysis. Chlorinated and brominated coals were also prepared to compare the volatility differences between organically and inorganically bound halogens during the pyrolysis reaction. These products and the coal char residues were analyzed for the spiked elements mainly by neutron activation analysis for the spiked elements to determine their degree of volatility. Volatility and recovery (mass balance) will be discussed for those elements that appeared highly volatile during pyrolysis. In order to understand the halogenated compounds in the pyrolysis products, gas chromatograms were taken to the collected pyrolysis products of coal, hydrogenated coal, NaCl spiked coal, NaBr spiked coal, chlorinated coal, and brominated coal

The interplay of contextual elements in implementation: an ethnographic case study.

Science.gov (United States)

McCullough, Megan B; Chou, Ann F; Solomon, Jeffrey L; Petrakis, Beth Ann; Kim, Bo; Park, Angela M; Benedict, Ashley J; Hamilton, Alison B; Rose, Adam J

2015-02-14

Contextual elements have significant impact on uptake of health care innovations. While existing conceptual frameworks in implementation science suggest contextual elements interact with each other, little research has described how this might look in practice. To bridge this gap, this study identifies the interconnected patterns among contextual elements that influence uptake of an anticoagulation clinic improvement initiative. We completed 51 semi-structured interviews and ethnographic observations across five case study sites involved in an evidence-based practice (EBP) quality improvement initiative. We analyzed data in NVivo 10 using an a priori approach based on the Promoting Action on Research Implementation in Health Services (PARIHS) model and an emergent thematic analysis. Key contextual elements, such as leadership, teamwork, and communication, interacted with each other in contributing to site-level uptake of the EBP, often yielding results that could not be predicted by looking at just one of these elements alone. Sites with context conducive to change in these areas predictably had high uptake, while sites with uniformly weak contextual elements had low uptake. Most sites presented a mixed picture, with contextual elements being strongly supportive of change in some areas and weak or moderate in others. In some cases, we found that sites with strong context in at least one area only needed to have adequate context in other areas to yield high uptake. At other sites, weak context in just one area had the potential to contribute to low uptake, despite countervailing strengths. Even a site with positive views of EBPs could not succeed when context was weak. Interrelationships among different contextual elements can act as barriers to uptake at some sites and as facilitators at others. Accounting for interconnections among elements enables PARIHS to more fully describe the determinants of successful implementation as they operate in real-world settings.

Elemental content changes in hemolymph of Rhodnius prolixus due to mercury contamination: a study using SR-TXRF

Energy Technology Data Exchange (ETDEWEB)

Mantuano, A.; Oliveira, A.P.; Barroso, R.C. [Universidade do Estado do Rio de Janeiro (UERJ), Rio de Janeiro, RJ (Brazil); Almeida, A.P.; Braz, D.; Cardoso, S.C. [Universidade Federal do Rio de Janeiro (UFRJ), Rio de Janeiro, RJ (Brazil); Figueiredo, M.B.; Azambuja, P. [Fundacao Instituto Osvaldo Cruz (FIOCRUZ), Rio de Janeiro, RJ (Brazil); Gonzalez, M.S. [Universidade Federal Fluminense (UFF), Niteroi, RJ (Brazil)

2012-07-01

Full text: In recent years, the effects of pollution on the health of humans and other vertebrates have been extensively studied. However, the effects on some invertebrates are comparatively unknown. Research has demonstrated that toxic metals interfere with the reproduction, development and immune defenses of some terrestrial and marine invertebrates. Depending on environmental conditions, pollution produces chronic and acute effects on different systems and organs of animals. In general, some more toxic elements like arsenic, cadmium, lead, mercury and nickel in contact with organisms change cellular structures, enzyme activities, and in some cases destroy the physiological integrities of the tissues. In insects, the effects of pollutants depend upon the species studied. In this work, we investigated the changes in elemental contents in the hemolymph of Rhodnius prolixus on 2 and 5 days after feeding on blood containing mercury chloride. R. Prolixus is an obligated hematophagous Hemiptera and one of the most important insect vectors of trypanosoma cruzi, the causative agent of Chagas disease. The SR-TXRF measurements were performed at the X-ray fluorescence (XRF) beamline facility in Brazilian Synchrotron Light Laboratory LNLS/Brazil. The major elements Cl, K, Ca, Mn, Fe, Cu, Zn, Se, Br, Rb, K were found in all hemolymph samples analysed. Insects treated with HgCl2 had reduced Cl and Ca levels, whereas the same treatment had enhanced Br levels in comparison with non- treated control insects. (author)

Analysis of warping deformation modes using higher order ANCF beam element

Science.gov (United States)

Orzechowski, Grzegorz; Shabana, Ahmed A.

2016-02-01

Most classical beam theories assume that the beam cross section remains a rigid surface under an arbitrary loading condition. However, in the absolute nodal coordinate formulation (ANCF) continuum-based beams, this assumption can be relaxed allowing for capturing deformation modes that couple the cross-section deformation and beam bending, torsion, and/or elongation. The deformation modes captured by ANCF finite elements depend on the interpolating polynomials used. The most widely used spatial ANCF beam element employs linear approximation in the transverse direction, thereby restricting the cross section deformation and leading to locking problems. The objective of this investigation is to examine the behavior of a higher order ANCF beam element that includes quadratic interpolation in the transverse directions. This higher order element allows capturing warping and non-uniform stretching distribution. Furthermore, this higher order element allows for increasing the degree of continuity at the element interface. It is shown in this paper that the higher order ANCF beam element can be used effectively to capture warping and eliminate Poisson locking that characterizes lower order ANCF finite elements. It is also shown that increasing the degree of continuity requires a special attention in order to have acceptable results. Because higher order elements can be more computationally expensive than the lower order elements, the use of reduced integration for evaluating the stress forces and the use of explicit and implicit numerical integrations to solve the nonlinear dynamic equations of motion are investigated in this paper. It is shown that the use of some of these integration methods can be very effective in reducing the CPU time without adversely affecting the solution accuracy.

Principal elements of the Basalt Waste Isolation Project performance assessment studies

International Nuclear Information System (INIS)

Baca, R.G.; Wilde, R.T.

1983-12-01

In this paper, three of the principal elements of the Basalt Waste Isolation Project (BWIP) performance assessment studies are focused on: (1) development of a methodology for probabilistic risk assessment, (2) performance analyses of repository subsystems, and (3) selection and ranking of disruptive event scenarios. Other elements of the BWIP performance assessment studies are briefly outlined. 12 references, 5 figures

Integrating Literature with Craft in a Learning Process with Creative Elements

Science.gov (United States)

Aerila, Juli-Anna; Rönkkö, Marja-Leena

2015-01-01

Art-related learning should be the central way of doing and playing in preschool, because the high quality of art-related education has a positive effect on children's well-being, identity development, and creative thinking. In our study we tested an integrated learning process where reading literature and telling stories is combined with the…

Theoretical basis for a transient thermal elastic-plastic stress analysis of nuclear reactor fuel elements

International Nuclear Information System (INIS)

Hsu, T.R.; Bertels, A.W.M.; Banerjee, S.; Harrison, W.C.

1976-07-01

This report presents the theoretical basis for a transient thermal elastic-plastic stress analysis of a nuclear reactor fuel element subject to severe transient thermo-mechanical loading. A finite element formulation is used for both the non-linear stress analysis and thermal analysis. These two major components are linked together to form an integrated program capable of predicting fuel element transient behaviour in two dimensions. Specific case studies are presented to illustrate capabilities of the analysis. (author)

Finite element modelling of shot peening process: Prediction of the compressive residual stresses, the plastic deformations and the surface integrity

International Nuclear Information System (INIS)

Frija, M.; Hassine, T.; Fathallah, R.; Bouraoui, C.; Dogui, A.

2006-01-01

This paper presents a numerical simulation of the shot peening process using finite element method. The majority of the controlling parameters of the process have been taken into account. The shot peening loading has been characterised by using energy equivalence between the dynamic impact and a static indentation of a peening shot in the treated surface. The behaviour of the subjected material is supposed to be elastic plastic with damage. An integrated law of the damage proposed by Lemaitre and Chaboche has been used. The proposed model leads to obtain the residual stress, the plastic deformation profiles and the surface damage. An application on a shot peened Ni-based super alloy Waspaloy has been carried out. The comparison of the residual stresses, obtained by X-ray diffraction method and by finite element calculation, shows a good correlation. The in-depth profile of the plastic deformations and the superficial damage values are in good agreement with the experimental observations

A General Finite Element Scheme for Limit State Analysis and Optimization

DEFF Research Database (Denmark)

Damkilde, Lars

1999-01-01

Limit State analysis which is based on a perfect material behaviour is used in many different applications primarily within Structural Engineering and Geotechnics. The calculation methods have not reached the same level of automation such as Finite Element Analysis for elastic structures....... The computer based systems are more ad hoc based and are typically not well-integrated with pre- and postprocessors well-known from commercial Finite Element codes.A finite element based formulation of limit state analysis is presented which allows an easy integration with standard Finite Element codes...... for elastic analysis. In this way the user is able to perform a limit state analysis on the same model used for elastic analysis only adding data for the yield surface.The method is based on the lower-bound theorem and uses stress-based elements with a linearized yield surface. The mathematical problem...

[Integrated health care organizations: guideline for analysis].

Science.gov (United States)

Vázquez Navarrete, M Luisa; Vargas Lorenzo, Ingrid; Farré Calpe, Joan; Terraza Núñez, Rebeca

2005-01-01

There has been a tendency recently to abandon competition and to introduce policies that promote collaboration between health providers as a means of improving the efficiency of the system and the continuity of care. A number of countries, most notably the United States, have experienced the integration of health care providers to cover the continuum of care of a defined population. Catalonia has witnessed the steady emergence of increasing numbers of integrated health organisations (IHO) but, unlike the United States, studies on health providers' integration are scarce. As part of a research project currently underway, a guide was developed to study Catalan IHOs, based on a classical literature review and the development of a theoretical framework. The guide proposes analysing the IHO's performance in relation to their final objectives of improving the efficiency and continuity of health care by an analysis of the integration type (based on key characteristics); external elements (existence of other suppliers, type of services' payment mechanisms); and internal elements (model of government, organization and management) that influence integration. Evaluation of the IHO's performance focuses on global strategies and results on coordination of care and efficiency. Two types of coordination are evaluated: information coordination and coordination of care management. Evaluation of the efficiency of the IHO refers to technical and allocative efficiency. This guide may have to be modified for use in the Catalan context.

Multitracer study on uptake of elements by plants

Energy Technology Data Exchange (ETDEWEB)

Ambe, Shizuko [Institute of Physical and Chemical Research, Wako, Saitama (Japan)

1996-12-31

A disk target of Au or Ag was irradiated with a 135-MeV/nucleon {sup 12}C, {sup 14}N, or {sup 16}O beam. Multitracer solutions were prepared radiochemically from the targets in carrier- and salt-free states. Rice and soybean plants were cultured in a nutrient solution or on soil containing a multitracer. In the experiment of absorption of elements through leaves, either soybean plants were grown in the atmosphere where multitracer-adsorbed cellulose particles were floating in the air or two drops of a multitracer solution was applied onto leaves of Japanese radish. After cultivation, the plants were harvested and they were dried at 65degC for one day and subjected to {gamma}-ray measurement with HPGe detectors. In the case of hydroponically cultured plants, large amounts of almost all of the metal ions in the nutrient solution were absorbed by the roots. In contrast, plants grown on the soil gave extremely low percentage distributions for all the elements examined. This difference is explained by the low distribution of metal ions in soil water and the dilution of radioisotopes with the corresponding elements in soil. When the multitracer is added to soil, adsorption of each radioisotope takes place, resulting in the small partition in soil water. Relatively large amounts of Se, Rb, and Co were accumulated in the seeds of soybean plants which were grown in the presence of floating multitracer-adsorbed cellulose particles in the air. Since the seeds were not directly exposed, the elements detected in the seeds are considered to be transported to the seeds after absorption through leaves. When the multitracer solution were applied onto the leaves, Zn, Rb, Sr, and Mn were absorbed and transported quickly compared with other elements from the application site to other parts of the plant. These results obtained demonstrate that the multitracer technique is powerful in studies on absorption and transport of trace elements in plants. (J.P.N.)

Multitracer study on uptake of elements by plants

International Nuclear Information System (INIS)

Ambe, Shizuko

1996-01-01

A disk target of Au or Ag was irradiated with a 135-MeV/nucleon 12 C, 14 N, or 16 O beam accelerated by the RIKEN Ring Cyclotron. Multitracer solutions were prepared radiochemically from the targets in carrier- and salt-free states. Rice and soybean plants were cultured in a nutrient solution or on soil containing a multitracer. In the experiment of absorption of elements through leaves, either soybean plants were grown in the atmosphere where multitracer-adsorbed cellulose particles were floating in the air or two drops of a multitracer solution was applied onto leaves of Japanese radish. After cultivation, the plants were harvested and they were dried at 65degC for one day and subjected to γ-ray measurement with HPGe detectors. In the case of hydroponically cultured plants, large amounts of almost all of the metal ions in the nutrient solution were absorbed by the roots. In contrast, plants grown on the soil gave extremely low percentage distributions for all the elements examined. This difference is explained by the low distribution of metal ions in soil water and the dilution of radioisotopes with the corresponding elements in soil. When the multitracer is added to soil, adsorption of each radioisotope takes place, resulting in the small partition in soil water. Relatively large amounts of Se, Rb, and Co were accumulated in the seeds of soybean plants which were grown in the presence of floating multitracer-adsorbed cellulose particles in the air. Since the seeds were not directly exposed, the elements detected in the seeds are considered to be transported to the seeds after absorption through leaves. When the multitracer solution were applied onto the leaves, Zn, Rb, Sr, and Mn were absorbed and transported quickly compared with other elements from the application site to other parts of the plant. These results obtained demonstrate that the multitracer technique is powerful in studies on absorption and transport of trace elements in plants. (J.P.N.)

Evaluation of stable crack growth by using the finite element method

International Nuclear Information System (INIS)

Saarenheimo, A.

1996-01-01

In the study the analysis of stable crack growth by using the finite element method is considered. The results of numerical analyses are compared with the corresponding experimental results. The applications are reported in three separate papers enclosed at the end of the work. The first paper deals with the numerical analysis of a full scale pressure vessel test. The second and the third paper concern numerical analyses of fracture mechanical test specimens. In the literature study section of the work basic theories of fracture mechanics and common crack growth criteria are presented. The balance equations needed are written based on thermodynamical considerations. Physical interpretations of the energy release rate are briefly considered. Numerical calculation methods for determining the J-integral values are presented. The virtual crack extension method is used in the numerical examples. Also the Domain integral method and its implementation in the finite element method are described. (orig.) (70 refs.)

Finite element simulation of ironing process under warm conditions

Directory of Open Access Journals (Sweden)

Swadesh Kumar Singh

2014-01-01

Full Text Available Metal forming is one of the most important steps in manufacturing of a large variety of products. Ironing in deep drawing is done by adjusting the clearance between the punch and the die and allow the material flow over the punch. In the present investigation effect of extent of ironing behavior on the characteristics of the product like thickness distribution with respect to temperature was studied. With the help of finite element simulation using explicit finite element code LS-DYNA the stress in the drawn cup were predicted in the drawn cup. To increase the accuracy in the simulation process, numbers of integration points were increased in the thickness direction and it was found that there is very close prediction of finite element results to that of experimental ones.

Integrated nonthermal treatment system study

International Nuclear Information System (INIS)

Biagi, C.; Bahar, D.; Teheranian, B.; Vetromile, J.; Quapp, W.J.; Bechtold, T.; Brown, B.; Schwinkendorf, W.; Swartz, G.

1997-01-01

This report presents the results of a study of nonthermal treatment technologies. The study consisted of a systematic assessment of five nonthermal treatment alternatives. The treatment alternatives consist of widely varying technologies for safely destroying the hazardous organic components, reducing the volume, and preparing for final disposal of the contact-handled mixed low-level waste (MLLW) currently stored in the US Department of Energy complex. The alternatives considered were innovative nonthermal treatments for organic liquids and sludges, process residue, soil and debris. Vacuum desorption or various washing approaches are considered for treatment of soil, residue and debris. Organic destruction methods include mediated electrochemical oxidation, catalytic wet oxidation, and acid digestion. Other methods studied included stabilization technologies and mercury separation of treatment residues. This study is a companion to the integrated thermal treatment study which examined 19 alternatives for thermal treatment of MLLW waste. The quantities and physical and chemical compositions of the input waste are based on the inventory database developed by the US Department of Energy. The Integrated Nonthermal Treatment Systems (INTS) systems were evaluated using the same waste input (2,927 pounds per hour) as the Integrated Thermal Treatment Systems (ITTS). 48 refs., 68 figs., 37 tabs

Integrated nonthermal treatment system study

Energy Technology Data Exchange (ETDEWEB)

Biagi, C.; Bahar, D.; Teheranian, B.; Vetromile, J. [Morrison Knudsen Corp. (United States); Quapp, W.J. [Nuclear Metals (United States); Bechtold, T.; Brown, B.; Schwinkendorf, W. [Lockheed Martin Idaho Technologies Co., Idaho Falls, ID (United States); Swartz, G. [Swartz and Associates (United States)

1997-01-01

This report presents the results of a study of nonthermal treatment technologies. The study consisted of a systematic assessment of five nonthermal treatment alternatives. The treatment alternatives consist of widely varying technologies for safely destroying the hazardous organic components, reducing the volume, and preparing for final disposal of the contact-handled mixed low-level waste (MLLW) currently stored in the US Department of Energy complex. The alternatives considered were innovative nonthermal treatments for organic liquids and sludges, process residue, soil and debris. Vacuum desorption or various washing approaches are considered for treatment of soil, residue and debris. Organic destruction methods include mediated electrochemical oxidation, catalytic wet oxidation, and acid digestion. Other methods studied included stabilization technologies and mercury separation of treatment residues. This study is a companion to the integrated thermal treatment study which examined 19 alternatives for thermal treatment of MLLW waste. The quantities and physical and chemical compositions of the input waste are based on the inventory database developed by the US Department of Energy. The Integrated Nonthermal Treatment Systems (INTS) systems were evaluated using the same waste input (2,927 pounds per hour) as the Integrated Thermal Treatment Systems (ITTS). 48 refs., 68 figs., 37 tabs.

Leading with integrity: a qualitative research study.

Science.gov (United States)

Storr, Loma

2004-01-01

This research paper gives an account of a study into the relationship between leadership and integrity. There is a critical analysis of the current literature for effective, successful and ethical leadership particularly, integrity. The purpose and aim of this paper is to build on the current notions of leadership within the literature, debate contemporary approaches, focussing specifically on practices within the UK National Health Service in the early 21st century. This leads to a discussion of the literature on ethical leadership theory, which includes public service values, ethical relationships and leading with integrity. A small study was undertaken consisting of 18 interviews with leaders and managers within a District General HospitaL Using the Repertory Grid technique and analysis 15 themes emerged from the constructs elicited, which were compared to the literature for leadership and integrity and other studies. As well as finding areas of overlap, a number of additional constructs were elicited which suggested that effective leadership correlates with integrity and the presence of integrity will improve organisational effectiveness. The study identified that perceptions of leadership character and behaviour are used to judge the effectiveness and integrity of a leader. However, the ethical implications and consequences of leaders' scope of power and influence such as policy and strategy are somewhat neglected and lacking in debate. The findings suggest that leaders are not judged according to the ethical nature of decision making, and leading and managing complex change but that the importance of integrity and ethical leadership correlated with higher levels of hierarchical status and that it is assumed by virtue of status and success that leaders lead with integrity. Finally, the findings of this study seem to suggest that nurse leadership capability is developing as a consequence of recent national investment.

Development and miniaturization of a photoacoustic silicon integrated spectrometer for trace gas analysis; Etude et developpement d`un spectrometre photoacoustique integre sur silicium pour analyse de gaz

Energy Technology Data Exchange (ETDEWEB)

Jourdain, A.

1998-10-29

The study deals with the integration on silicon wafers of an infrared spectrometer for carbon dioxide measurements. Photoacoustic detection that measures a differential pressure in a cavity turns out to be the best spectroscopic technique for miniaturization and integration. The micro-system is composed of two main components: an infrared light source on a silicon nitride membrane and a component integrating a tunable optical filter, a microphone for detection and a micro-cavity. After a theoretical study of the different components, each element is realized with the microelectronic techniques such as photolithography, thin films deposits and dry and wet etching. A resin sealing of all the different elements realizes the final micro-spectrophotometer. A characterization of the components is done thanks to the realization of an electronic specific set-up. (author) 107 refs.

Integration of growth factor signals at the c-fos serum response element.

Science.gov (United States)

Price, M A; Hill, C; Treisman, R

1996-04-29

A transcription factor ternary complex composed of serum response factor (SRF) and a second factor, ternary complex factor (TCF), mediates the response of the c-fos Serum Response Element to growth factors and mitogens. In NIH3T3 fibroblasts, TCF binding is required for transcriptional activation by the SRE in response to activation of the Ras-Raf-ERK pathway. We compared the properties of three members of the TCF family, Elk-1, SAP-1 and SAP-2 (ERP/NET). Although all the proteins contain sequences required for ternary complex formation with SRF, only Elk-1 and SAP-1 appear to interact with the c-fos SRE efficiently in vivo. Each TCF contains a C-terminal activation domain capable of transcriptional activation in response to activation of the Ras-Raf-ERK pathway, and this is dependent on the integrity of S/T-P motifs conserved between all the TCF family members. In contrast, activation of the SRE by whole serum and the mitogenic phospholipid LPA requires SRF binding alone. Constitutively activated members of the Rho subfamily of Ras-like GTPases are also capable of inducing activation of the SRE in the absence of TCF; unlike activated Ras itself, these proteins do not activate the TCFs in NIH3T3 cells. At the SRE, SRF- and TCF-linked signalling pathways act synergistically to potentiate transcription.

The fractionation and geochemical characteristics of rare earth elements measured in ambient size-resolved PM in an integrated iron and steelmaking industry zone.

Science.gov (United States)

Dai, Qili; Li, Liwei; Yang, Jiamei; Liu, Baoshuang; Bi, Xiaohui; Wu, Jianhui; Zhang, YuFen; Yao, Lin; Feng, Yinchang

2016-09-01

Improved understanding of the fractionation and geochemical characteristic of rare earth elements (REEs) from steel plant emissions is important due to the unclear atmospheric signature of these elements and their adverse impact on human health and the environment. In this study, ambient particulate matter of different sizes was collected from one site in an integrated iron and steelmaking industrial zone (HG) and one urban background site with no direct industrial emissions (ZWY) during a 1-year sampling campaign in China. The total concentrations of REEs for TSP, PM10, and PM2.5 were 27.248, 14.989, 3.542 ng/m(3) in HG and 6.326, 5.274, 1.731 ng/m(3), respectively, in ZWY, which revealed the local influence of the steelmaking activities to the air quality. With respect to ZWY, the REEs in HG site are obviously fractionated in the coarser fraction, and LREEs account for more than 80 % of the total REE burden in all of the samples. Additionally, the REEs in HG and ZWY show a homogeneous trend with successively increased LREE/HREE ratios from the coarse particles to the fine particles. In our samples, La, Ce, Nd, and Sm are the most enriched rare earth elements, especially in the HG site. Moreover, ternary diagrams of LaCeSm indicate that the REEs in HG are potentially contributed by steelworks, carrier vehicles, coal combustion, and road dust re-suspension.

Does the graft-tunnel friction influence knee joint kinematics and biomechanics after anterior cruciate ligament reconstruction? A finite element study.

Science.gov (United States)

Wan, Chao; Hao, Zhixiu

2018-02-01

Graft tissues within bone tunnels remain mobile for a long time after anterior cruciate ligament (ACL) reconstruction. However, whether the graft-tunnel friction affects the finite element (FE) simulation of the ACL reconstruction is still unclear. Four friction coefficients (from 0 to 0.3) were simulated in the ACL-reconstructed joint model as well as two loading levels of anterior tibial drawer. The graft-tunnel friction did not affect joint kinematics and the maximal principal strain of the graft. By contrast, both the relative graft-tunnel motion and equivalent strain for the bone tunnels were altered, which corresponded to different processes of graft-tunnel integration and bone remodeling, respectively. It implies that the graft-tunnel friction should be defined properly for studying the graft-tunnel integration or bone remodeling after ACL reconstruction using numerical simulation.

Application of finite element numerical technique to nuclear reactor geometries

Energy Technology Data Exchange (ETDEWEB)

Rouai, N M [Nuclear engineering department faculty of engineering Al-fateh universty, Tripoli (Libyan Arab Jamahiriya)

1995-10-01

Determination of the temperature distribution in nuclear elements is of utmost importance to ensure that the temperature stays within safe limits during reactor operation. This paper discusses the use of Finite element numerical technique (FE) for the solution of the two dimensional heat conduction equation in geometries related to nuclear reactor cores. The FE solution stats with variational calculus which considers transforming the heat conduction equation into an integral equation I(O) and seeks a function that minimizes this integral and hence gives the solution to the heat conduction equation. In this paper FE theory as applied to heat conduction is briefly outlined and a 2-D program is used to apply the theory to simple shapes and to two gas cooled reactor fuel elements. Good results are obtained for both cases with reasonable number of elements. 7 figs.

Application of finite element numerical technique to nuclear reactor geometries

International Nuclear Information System (INIS)

Rouai, N. M.

1995-01-01

Determination of the temperature distribution in nuclear elements is of utmost importance to ensure that the temperature stays within safe limits during reactor operation. This paper discusses the use of Finite element numerical technique (FE) for the solution of the two dimensional heat conduction equation in geometries related to nuclear reactor cores. The FE solution stats with variational calculus which considers transforming the heat conduction equation into an integral equation I(O) and seeks a function that minimizes this integral and hence gives the solution to the heat conduction equation. In this paper FE theory as applied to heat conduction is briefly outlined and a 2-D program is used to apply the theory to simple shapes and to two gas cooled reactor fuel elements. Good results are obtained for both cases with reasonable number of elements. 7 figs

Integrating a logarithmic-strain based hyper-elastic formulation into a three-field mixed finite element formulation to deal with incompressibility in finite-strain elasto-plasticity

International Nuclear Information System (INIS)

Dina Al Akhrass; Bruchon, Julien; Drapier, Sylvain; Fayolle, Sebastien

2014-01-01

This paper deals with the treatment of incompressibility in solid mechanics in finite-strain elasto-plasticity. A finite-strain model proposed by Miehe, Apel and Lambrecht, which is based on a logarithmic strain measure and its work-conjugate stress tensor is chosen. Its main interest is that it allows for the adoption of standard constitutive models established in a small-strain framework. This model is extended to take into account the plastic incompressibility constraint intrinsically. In that purpose, an extension of this model to a three-field mixed finite element formulation is proposed, involving displacements, a strain variable and pressure as nodal variables with respect to standard finite element. Numerical examples of finite-strain problems are presented to assess the performance of the formulation. To conclude, an industrial case for which the classical under-integrated elements fail is considered. (authors)

Safeguards-by-Design: An Element of 3S Integration

International Nuclear Information System (INIS)

Bean, R.S.; Bjornard, T.A.; Hebdich, D.J.

2009-01-01

In 2008, the '20/20 Vision for the Future' background report by the IAEA Director General identified the possibility of integrating certain activities related to safeguards, safety, and security. Later in the year, the independent Commission report prepared at the request of the IAEA Director General noted that the Agency's's roles in nuclear safeguards, safety, and security (3S) complement and can mutually reinforce each other. Safeguards-by-design (SBD) is a practical measure that strengthens 3S integration, especially for the stage of nuclear facility design and construction, but also with ramifications for other stages of the facility life-cycle. This paper describes the SBD concept, with examples for diverse regulatory environments, being developed in the U.S under the U.S. Department of Energy (DOE) Next Generation Safeguards Initiative and the Advanced Fuel Cycle Initiative. This is compared with related international SBD work performed in the recent IAEA workshop on 'Facility Design and Plant Operation Features that Facilitate the Implementation of IAEA Safeguards'. Potential future directions for further development of SBD and its integration within 3S are identified.

Status of the JWST Integrated Science Instrument Module

Science.gov (United States)

Greenhouse, Matthew A.; Dunn, Jamie; Kimble, Randy A.; Lambros, Scott; Lundquist, Ray; Rauscher, Bernard J.; Van Campen, Julie

2015-01-01

The James Webb Space Telescope (JWST) Integrated Science Instrument Module (ISIM) is the science instrument payload of the JWST. It is one of three system elements that comprise the JWST space vehicle. It consists of four science sensors, a fine guidance sensor, and nine other subsystems that support them. At 1.4 metric tons, it comprises approximately 20% of the JWST mass. The ISIM is currently at 100% integration and has completed 2 of 3 planned element-level space simulation tests. The ISIM is on schedule to be delivered for integration with the Optical Telescope Element during 2015. In this poster, we present an overview of the ISIM and its status.

Finite-element pre-analysis for pressurized thermoshock tests

International Nuclear Information System (INIS)

Keinaenen, H.; Talja, H.; Lehtonen, M.; Rintamaa, R.; Bljumin, A.; Timofeev, B.

1992-05-01

The behaviour of a model pressure vessel is studied in a pressurized thermal shock loading. The tests were performed at the Prometey Institute in St. Petersburg. The calculations were performed at the Technical Research Centre of Finland. The report describes the preliminary finite-element analyses for the fourth, fifth and sixth thermoshock tests with the first model pressure vessel. Seven pressurized thermoshock tests were made with the same model using five different flaw geometries. In the first three tests the flaw was actually a blunt notch. In the two following tests (tests 4 and 5) a sharp pre-crack was produced before the test. In the last two test (tests 6 and 7) the old crack was used. According to the measurements and post-test ultrasonic examination of the crack front, the sixth test led to significant crack extension. Both temperatures and stresses were calculated using the finite-element method. The calculations were made using the idealized initial flaw geometry and preliminary material data. Both two-and three-dimensional models were used in the calculations. J-integral values were calculated from the elastic-plastic finite-element results. The stress intensity factor values were evaluated on the basis of the calculated J-integrals and compared with the preliminary material fracture toughness data obtained from the Prometey Institute

A study of trace elements in the atmosphere of PINSTECH, Nilore

International Nuclear Information System (INIS)

Rusheed, A.; Ahmed, S.; Mannan, A.; Qureshi, I. H.

1987-06-01

Atmospheric aerosol particulates of inorganic elements are usually transported to long distances from their source of emmision. The measurement of these elements in air provides useful information for understanding aerosol effects. Therefore studies were undertaken to determine the atmospheric concentration of some inorganic elements, 23 air filter samples of 24 hour duration were collected at Nilore, Islamabad area and analysed for 16 elements by neutron activation analysis (NAA). The concentration of 9 elements were determined in more than 12 samples. Comparison of the average concentration of these elements with those observed at other sites in U.S.A and U.K., indicate a distribution pattern similar to a non-urban site with very little pollution from industerial sources. Binary collection coefficients were calculated using the data of 9 principal elements of identify particulate sources. Co, Cr, Cs, Eu, Fe, Sc and Rb were assigned a crustal source, whereas Sb could possible has an anthropogenic source. Zn was found to have a constant nearby source the exact nature of which could be ascertained after a complete analysis of local soil and other possible sources near the site. (orign./A.B.)

CanWEA Pan-Canadian wind integration study paper

Energy Technology Data Exchange (ETDEWEB)

Tremblay, Martin [GL Garrad Hassan Canada Inc, Ottawa, ON (Canada); Gardner, Paul [GL Garrad Hassan and Partners, Glasgow (United Kingdom); Price, Doug; Le, Don [GL Garrad Hassan America, San Diego, CA (United States)

2010-07-01

GL Garrad Hassan has been contracted by CanWEA to undertake a scoping study for a future Pan-Canadian Wide-Scale Wind Integration Study. The scoping study provides the methodology and the rationale on which the actual wind integration study and request for proposals will be based on. Major system operators and owners of each Canadian Province along with experts involved in major US wind integration studies have been consulted and contributed to the decisional process. This paper provides a summary of the factors considered in the study and outline the actual methodology that was adopted for the future Pan-Canadian wind integration study. (orig.)

Finite Element Analysis of Circular Plate using SolidWorks

International Nuclear Information System (INIS)

Kang, Yeo Jin; Jhung, Myung Jo

2011-01-01

Circular plates are used extensively in mechanical engineering for nuclear reactor internal components. The examples in the reactor vessel internals are upper guide structure support plate, fuel alignment plate, lower support plate etc. To verify the structural integrity of these plates, the finite element analyses are performed, which require the development of the finite element model. Sometimes it is very costly and time consuming to make the model especially for the beginners who start their engineering job for the structural analysis, necessitating a simple method to develop the finite element model for the pursuing structural analysis. Therefore in this study, the input decks are generated for the finite element analysis of a circular plate as shown in Fig. 1, which can be used for the structural analysis such as modal analysis, response spectrum analysis, stress analysis, etc using the commercial program Solid Works. The example problems are solved and the results are included for analysts to perform easily the finite element analysis of the mechanical plate components due to various loadings. The various results presented in this study would be helpful not only for the benchmark calculations and results comparisons but also as a part of the knowledge management for the future generation of young designers, scientists and computer analysts

Analysis of anisotropic crack problems using coupled meshless and fractal finite element method

International Nuclear Information System (INIS)

Rao, B N; Rajesh, K N

2010-01-01

This paper presents a coupling technique for integrating the element-free Galerkin method (EFGM) with fractal the finite element method (FFEM) for analyzing homogeneous, anisotropic, and two dimensional linear-elastic cracked structures subjected to mixed-mode (modes I and II) loading conditions. FFEM is adopted for discretization of domain close to the crack tip and EFGM is adopted in the rest of the domain. In the transition region interface elements are employed. The proposed method combines the best features of EFGM and FFEM, in the sense that no structured mesh or special enriched basis functions are necessary and no post-processing (employing any path independent integrals) is needed to determine fracture parameters such as stress intensity factors (SIFs) and T-stress. The numerical results based on all four orthotropic cases show that SIFs and T-stress obtained using the proposed method are in excellent agreement with the reference solutions for the structural and crack geometries considered in the present study.

Formation of production structural units within a construction company using the systemic integrated method when implementing high-rise development projects

Science.gov (United States)

Lapidus, Azary; Abramov, Ivan

2018-03-01

Development of efficient algorithms for designing future operations is a vital element in construction business. This paper studies various aspects of a methodology required to determine the integration index for construction crews performing various process-related jobs. The main objective of the study outlined in this paper is to define the notion of integration in respect to a construction crew that performs complete cycles of construction and assembly works in order to find the optimal organizational solutions, using the integrated crew algorithm built specifically for that purpose. As seen in the sequence of algorithm elements, it was designed to focus on the key factors affecting the level of integration of a construction crew depending on the value of each of those elements. The multifactor modelling approach is used to assess the KPI of integrated construction crews involved in large-sale high-rise construction projects. The purpose of this study is to develop a theoretical recommendation and a scientific methodological provision of organizational and technological nature to ensure qualitative formation of integrated construction crews to increase their productivity during integrated implementation of multi-task construction phases. The key difference of the proposed solution from the already existing ones is that it requires identification of the degree of impact of each factor, including the change in the qualification level, on the integration index of each separate element in the organizational and technological system in construction (integrated construction crew).

Formation of production structural units within a construction company using the systemic integrated method when implementing high-rise development projects

Directory of Open Access Journals (Sweden)

Lapidus Azary

2018-01-01

Full Text Available Development of efficient algorithms for designing future operations is a vital element in construction business. This paper studies various aspects of a methodology required to determine the integration index for construction crews performing various process-related jobs. The main objective of the study outlined in this paper is to define the notion of integration in respect to a construction crew that performs complete cycles of construction and assembly works in order to find the optimal organizational solutions, using the integrated crew algorithm built specifically for that purpose. As seen in the sequence of algorithm elements, it was designed to focus on the key factors affecting the level of integration of a construction crew depending on the value of each of those elements. The multifactor modelling approach is used to assess the KPI of integrated construction crews involved in large-sale high-rise construction projects. The purpose of this study is to develop a theoretical recommendation and a scientific methodological provision of organizational and technological nature to ensure qualitative formation of integrated construction crews to increase their productivity during integrated implementation of multi-task construction phases. The key difference of the proposed solution from the already existing ones is that it requires identification of the degree of impact of each factor, including the change in the qualification level, on the integration index of each separate element in the organizational and technological system in construction (integrated construction crew.

Integrated polymer micro-ring resonators for optical sensing applications

OpenAIRE

Girault , Pauline; Lorrain , Nathalie; Poffo , Luiz; Guendouz , Mohammed; Lemaitre , Jonathan; Carré , Christiane; Gadonna , Michel; Bosc , Dominique; Vignaud , Guillaume

2015-01-01

International audience; Micro-resonators (MR) have become a key element for integrated optical sensors due to their integration capability and their easy fabrication with low cost polymer materials. Nowadays, there is a growing need on MRs as highly sensitive and selective functions especially in the areas of food and health. The context of this work is to implement and study integrated micro-ring resonators devoted to sensing applications. They are fabricated by processing SU8 polymer as cor...

Study of the integration of distributed generation systems in the grid: application in micro-grids; Etude de structures d'integration des systemes de generation decentralisee: application aux microreseaux

Energy Technology Data Exchange (ETDEWEB)

Gaztanaga Arantzamendi, H

2006-12-15

The present PhD deals with an original micro-grid concept and its application as a Renewable Energy Source's (RES) grid integration scheme. This micro-grid is composed of RES generators as well as support systems that incorporate additional functionalities in order to improve RES integration into the grid. According to this concept, two practical micro-grid applications have been studied in detail: a residential micro-grid and a wind farm supported by DFACTS systems (STATCOM and DVR). In both applications, the control structures which are implemented at different levels and applied to the different micro-grid elements have been developed, analyzed by means of off-line simulations and finally validated in real-time conditions with physical reduced-scale prototypes. (author)

Elastic-plastic finite element analyses for reducers with constant-depth internal circumferential surface cracks

International Nuclear Information System (INIS)

Wu, Szu-Ying; Tsai, Bor-Jiun; Chen, Jien-Jong

2015-01-01

In this study, a 3-D automatic elastic-plastic finite element mesh generator is established to accurately predict the J-integral value of an arbitrary reducer with a constant-depth internal circumferential surface crack under bending and axial force. The contact pairs are used on the crack surfaces to simulate the actual contact behaviors of the crack model under loadings. In order to verify the accuracy of the proposed elastic-plastic finite element model for a reducer with a surface crack, the cracked straight pipe models are generated according to a special modeling procedure for a flawed reducer. The J-integral values along the crack front of surface crack are calculated and compared with the straight pipe models which have been verified in the previous published studies. Based on the comparison of computed results, good agreements are obtained to show the accuracy of present numerical models. More confidence on using the 3-D elastic-plastic finite element analysis for reducers with internal circumferential surface cracks can be thus established in this work

3-D fracture analysis using a partial-reduced integration scheme

International Nuclear Information System (INIS)

Leitch, B.W.

1987-01-01

This paper presents details of 3-D elastic-plastic analyses of axially orientated external surface flaw in an internally pressurized thin-walled cylinder and discusses the variation of the J-integral values around the crack tip. A partial-reduced-integration-penalty method is introduced to minimize this variation of the J-integral near the crack tip. Utilizing 3-D symmetry, an eighth segment of a tube containing an elliptically shaped external surface flaw is modelled using 20-noded isoparametric elements. The crack-tip elements are collapsed to form a 1/r stress singularity about the curved crack front. The finite element model is subjected to internal pressure and axial pressure-generated loads. The virtual crack extension method is used to determine linear elastic stress intensity factors from the J-integral results at various points around the crack front. Despite the different material constants and the thinner wall thickness in this analysis, the elastic results compare favourably with those obtained by other researchers. The nonlinear stress-strain behaviour of the tube material is modelled using an incremental theory of plasticity. Variations of the J-integral values around the curved crack front of the 3-D flaw were seen. These variations could not be resolved by neglecting the immediate crack-tip elements J-integral results in favour of the more remote contour paths or else smoothed out when all the path results are averaged. Numerical incompatabilities in the 20-noded 3-D finite elements used to model the surface flaw were found. A partial-reduced integration scheme, using a combination of full and reduced integration elements, is proposed to determine J-integral results for 3-D fracture analyses. This procedure is applied to the analysis of an external semicircular surface flaw projecting halfway into the tube wall thickness. Examples of the J-integral values, before and after the partial-reduced integration method is employed, are given around the

Geochemical study of main elements and trace elements in soils of three profiles in the state of Santa Catarina

International Nuclear Information System (INIS)

Santelli, R.E.

1985-01-01

The total concentrations of the main components (Si, Al, Fe, Ca, Mg, Mn, Ti, Na and K) and of nine trace elements (Ba, Co, Cu, La, Li, Mo, Ni, V and Zn are measured. The elements are determined by several atomic absorption and emission spectroscopic methods. Some properties such as granulometry, mineralogy of the clay fraction, organic matter, etc, are studied. (M.J.C.) [pt

The effects of computer game elements in physics instruction software for middle schools: A study of cognitive and affective gains

Science.gov (United States)

Vasquez, David Alan

Can the educational effectiveness of physics instruction software for middle schoolers be improved by employing "game elements" commonly found in recreational computer games? This study utilized a selected set of game elements to contextualize and embellish physics word problems with the aim of making such problems more engaging. Game elements used included: (1) a fantasy-story context with developed characters; and (2) high-end graphics and visual effects. The primary purpose of the study was to find out if the added production cost of using such game elements was justified by proportionate gains in physics learning. The theoretical framework for the study was a modified version of Lepper and Malone's "intrinsically-motivating game elements" model. A key design issue in this model is the concept of "endogeneity", or the degree to which the game elements used in educational software are integrated with its learning content. Two competing courseware treatments were custom-designed and produced for the study; both dealt with Newton's first law. The first treatment (T1) was a 45 minute interactive tutorial that featured cartoon characters, color animations, hypertext, audio narration, and realistic motion simulations using the Interactive PhysicsspTM software. The second treatment (T2) was similar to the first except for the addition of approximately three minutes of cinema-like sequences where characters, game objectives, and a science-fiction story premise were described and portrayed with high-end graphics and visual effects. The sample of 47 middle school students was evenly divided between eighth and ninth graders and between boys and girls. Using a pretest/posttest experimental design, the independent variables for the study were: (1) two levels of treatment; (2) gender; and (3) two schools. The dependent variables were scores on a written posttest for both: (1) physics learning, and (2) attitude toward physics learning. Findings indicated that, although

Recent studies of nuclear and chemical properties of elements 103, 104 and 105

International Nuclear Information System (INIS)

Hoffman, D.C.

1990-08-01

Information obtained since 1983 on the nuclear and chemical properties of element 103, the last on the actinide series, and elements 104 and 105, at the beginning of the transactinide series, is reviewed. Their chemical properties are compared with their lanthanide and lighter group 4 and 5 homologs and evidence for possible relativistic effects is discussed. The current knowledge of the nuclear properties of these elements and how these affect of the study of chemical properties is discussed. Some of the challenges involved in the study of short-lived isotopes which can only be produced an ''atom-at-a-time'' at an appropriate accelerator and the prognosis for future studies of these and still heavier elements are considered. 40 refs., 4 figs

Nuclear fuel element end fitting

International Nuclear Information System (INIS)

Jabsen, F.S.

1979-01-01

A typical embodiment of the invention has an array of sockets that are welded to the intersections of the plates that form the upper and lower end fittings of a nuclear reactor fuel element. The sockets, which are generally cylindrical in shape, are oriented in directions that enable the longitudinal axes of the sockets to align with the longitudinal axes of the fuel rods that are received in the respective sockets. Detents impressed in the surfaces of the sockets engage mating grooves that are formed in the ends of the fuel rods to provide for the structural integrity of the fuel element

Radiating Elements for Shared Aperture Tx/Rx Phased Arrays at K/Ka Band

KAUST Repository

Sandhu, Ali Imran; Arnieri, E.; Amendola, Giandomenico; Boccia, L.; Meniconi, Erika; Ziegler, Volker

2016-01-01

A dual band, Tx/Rx, self-diplexing phased array is presented. The antenna has been designed to cover Tx/Rx satellite communications at K/Ka band with a frequency ratio 1.5:1. To obtain dual band operations with a single radiating surface, a novel dual band radiator is adopted and placed in a configuration in which dual band and single band elements are interleaved. The proposed configuration reduces the number of radiating elements required by other solutions while avoiding the insurgence of grating lobes. The tightly packed arrangement of the elements poses many integration issues, which are solved with a novel integration technique. The array elements are optimized to scan the beam in excess of ° in both bands. A subarray with 49 Rx elements and 105 Tx elements was built and measured confirming the results obtained in simulations.

Radiating Elements for Shared Aperture Tx/Rx Phased Arrays at K/Ka Band

KAUST Repository

Sandhu, Ali Imran

2016-04-11

A dual band, Tx/Rx, self-diplexing phased array is presented. The antenna has been designed to cover Tx/Rx satellite communications at K/Ka band with a frequency ratio 1.5:1. To obtain dual band operations with a single radiating surface, a novel dual band radiator is adopted and placed in a configuration in which dual band and single band elements are interleaved. The proposed configuration reduces the number of radiating elements required by other solutions while avoiding the insurgence of grating lobes. The tightly packed arrangement of the elements poses many integration issues, which are solved with a novel integration technique. The array elements are optimized to scan the beam in excess of ° in both bands. A subarray with 49 Rx elements and 105 Tx elements was built and measured confirming the results obtained in simulations.

Synthesis Study of a 6-Element Non-Uniform Array with Tilted Elements for CLARREO Project

Science.gov (United States)

Jamnejad, Vahraz; Hoorfar, Ahmad

2012-01-01

This paper presents the results of a preliminary study of the gain/pattern properties of a 6-element Radio Occultation (RO) array for the proposed CLARREO (Climate Absolute Radiance and Refractivity Observatory (CLARREO) Project. CLARREO is one of the 4 highest priority missions recommended in the National Research Council Earth Science Decadal Survey.

Integrated marketing communications in sport organizations

Directory of Open Access Journals (Sweden)

Gašović Milan

2011-01-01

Full Text Available Integrated marketing communications represent the unification of organization's marketing and communication activities. Sports organizations have the emphasized need for effective communication with their environment (the public, the media, advertisers, sponsors, and other subjects interested in their offer. Elements of the integrated marketing communications are: advertising, personal selling, sales promotion, publicity, public relations, direct marketing, Internet communications etc. Each of these elements has some specifics which marketing specialists in sports organizations need to understand.

Dual reciprocity boundary element analysis for the laminar forced heat convection problem in concentric annulus

International Nuclear Information System (INIS)

Choi, Chang Yong

1999-01-01

This paper presents a study of the Dual Reciprocity Boundary Element Method (DRBEM) for the laminar heat convection problem in a concentric annulus with constant heat flux boundary condition. DRBEM is one of the most successful technique used to transform the domain integrals arising from the nonhomogeneous term of the poisson equation into equivalent boundary only integrals. This recently developed and highly efficient numerical method is tested for the solution accuracy of the fluid flow and heat transfer study in a concentric annulus. Since their exact solutions are available, DRBEM solutions are verified with different number of boundary element discretization and internal points. The results obtained in this study are discussed with the relative error percentage of velocity and temperature solutions, and potential applicability of the method for the more complicated heat convection problems with arbitrary duct geometries

Elements Explaining Learning Clinical Reasoning Using Simulation Games

Directory of Open Access Journals (Sweden)

Jaana-Maija Koivisto

2016-12-01

Full Text Available This article presents the findings on which elements in a game-based simulation affect learning clinical reasoning in nursing education. By using engaging gaming elements in virtual simulations and integrating the clinical reasoning process into game mechanics, games can enhance learning clinical reasoning and offer meaningful learning experiences. The study was designed to explore how nursing students experience gaming and learning when playing a simulation game, as well as which gaming elements explain learning clinical reasoning. The data was collected by questionnaire from nursing students (N = 166 in autumn 2014 over thirteen gaming sessions. The findings showed that usability, application of nursing knowledge, and exploration have the most impact on learning clinical reasoning when playing simulation games. Findings also revealed that authentic patient-related experiences, feedback, and reflection have an indirect effect on learning clinical reasoning. Based on these results, more efficient simulation games to improve clinical reasoning may be developed.   

A Kohn–Sham equation solver based on hexahedral finite elements

International Nuclear Information System (INIS)

Fang Jun; Gao Xingyu; Zhou Aihui

2012-01-01

We design a Kohn–Sham equation solver based on hexahedral finite element discretizations. The solver integrates three schemes proposed in this paper. The first scheme arranges one a priori locally-refined hexahedral mesh with appropriate multiresolution. The second one is a modified mass-lumping procedure which accelerates the diagonalization in the self-consistent field iteration. The third one is a finite element recovery method which enhances the eigenpair approximations with small extra work. We carry out numerical tests on each scheme to investigate the validity and efficiency, and then apply them to calculate the ground state total energies of nanosystems C 60 , C 120 , and C 275 H 172 . It is shown that our solver appears to be computationally attractive for finite element applications in electronic structure study.

Organizational determinants of interprofessional collaboration in integrative health care: systematic review of qualitative studies.

Directory of Open Access Journals (Sweden)

Vincent C H Chung

Full Text Available CONTEXT: Inteprofessional collaboration (IPC between biomedically trained doctors (BMD and traditional, complementary and alternative medicine practitioners (TCAMP is an essential element in the development of successful integrative healthcare (IHC services. This systematic review aims to identify organizational strategies that would facilitate this process. METHODS: We searched 4 international databases for qualitative studies on the theme of BMD-TCAMP IPC, supplemented with a purposive search of 31 health services and TCAM journals. Methodological quality of included studies was assessed using published checklist. Results of each included study were synthesized using a framework approach, with reference to the Structuration Model of Collaboration. FINDINGS: Thirty-seven studies of acceptable quality were included. The main driver for developing integrative healthcare was the demand for holistic care from patients. Integration can best be led by those trained in both paradigms. Bridge-building activities, positive promotion of partnership and co-location of practices are also beneficial for creating bonding between team members. In order to empower the participation of TCAMP, the perceived power differentials need to be reduced. Also, resources should be committed to supporting team building, collaborative initiatives and greater patient access. Leadership and funding from central authorities are needed to promote the use of condition-specific referral protocols and shared electronic health records. More mature IHC programs usually formalize their evaluation process around outcomes that are recognized both by BMD and TCAMP. CONCLUSIONS: The major themes emerging from our review suggest that successful collaborative relationships between BMD and TCAMP are similar to those between other health professionals, and interventions which improve the effectiveness of joint working in other healthcare teams with may well be transferable to promote better

Extended depth of field integral imaging using multi-focus fusion

Science.gov (United States)

Piao, Yongri; Zhang, Miao; Wang, Xiaohui; Li, Peihua

2018-03-01

In this paper, we propose a new method for depth of field extension in integral imaging by realizing the image fusion method on the multi-focus elemental images. In the proposed method, a camera is translated on a 2D grid to take multi-focus elemental images by sweeping the focus plane across the scene. Simply applying an image fusion method on the elemental images holding rich parallax information does not work effectively because registration accuracy of images is the prerequisite for image fusion. To solve this problem an elemental image generalization method is proposed. The aim of this generalization process is to geometrically align the objects in all elemental images so that the correct regions of multi-focus elemental images can be exacted. The all-in focus elemental images are then generated by fusing the generalized elemental images using the block based fusion method. The experimental results demonstrate that the depth of field of synthetic aperture integral imaging system has been extended by realizing the generation method combined with the image fusion on multi-focus elemental images in synthetic aperture integral imaging system.

Geomechanical Simulations of CO2 Storage Integrity using the Livermore Distinct Element Method

Energy Technology Data Exchange (ETDEWEB)

Morris, J P; Johnson, S M; Friedmann, S J

2008-07-11

Large-scale carbon capture and sequestration (CCS) projects involving annual injections of millions of tons of CO{sub 2} are a key infrastructural element needed to substantially reduce greenhouse gas emissions. The large rate and volume of injection will induce pressure and stress gradients within the formation that could activate existing fractures and faults, or drive new fractures through the caprock. We will present results of an ongoing investigation to identify conditions that will activate existing fractures/faults or make new fractures within the caprock using the Livermore Distinct Element Code (LDEC). LDEC is a multiphysics code, developed at LLNL, capable of simulating dynamic fracture of rock masses under a range of conditions. As part of a recent project, LDEC has been extended to consider fault activation and dynamic fracture of rock masses due to pressurization of the pore-space. We will present several demonstrations of LDEC functionality and applications of LDEC to CO{sub 2} injection scenarios including injection into an extensively fractured rockmass. These examples highlight the advantages of explicitly including the geomechanical response of each interface within the rockmass. We present results from our investigations of Teapot Dome using LDEC to study the potential for fault activation during injection. Using this approach, we built finite element models of the rock masses surrounding bounding faults and explicitly simulated the compression and shear on the fault interface. A CO{sub 2} injection source was introduced and the area of fault activation was predicted as a function of injection rate. This work presents an approach where the interactions of all locations on the fault are considered in response to specific injection scenarios. For example, with LDEC, as regions of the fault fail, the shear load is taken up elsewhere on the fault. The results of this study are consistent with previous studies of Teapot Dome and indicate

Finite element analysis of the neutron transport equation in spherical geometry

International Nuclear Information System (INIS)

Kim, Yong Ill; Kim, Jong Kyung; Suk, Soo Dong

1992-01-01

The Galerkin formulation of the finite element method is applied to the integral law of the first-order form of the one-group neutron transport equation in one-dimensional spherical geometry. Piecewise linear or quadratic Lagrange polynomials are utilized in the integral law for the angular flux to establish a set of linear algebraic equations. Numerical analyses are performed for the scalar flux distribution in a heterogeneous sphere as well as for the criticality problem in a uniform sphere. For the criticality problems in the uniform sphere, the results of the finite element method, with the use of continuous finite elements in space and angle, are compared with the exact solutions. In the heterogeneous problem, the scalar flux distribution obtained by using discontinuous angular and spatical finite elements is in good agreement with that from the ANISN code calculation. (Author)

Kinetic-energy matrix elements for atomic Hylleraas-CI wave functions

Energy Technology Data Exchange (ETDEWEB)

Harris, Frank E., E-mail: harris@qtp.ufl.edu [Department of Physics, University of Utah, Salt Lake City, Utah 84112, USA and Quantum Theory Project, University of Florida, P.O. Box 118435, Gainesville, Florida 32611 (United States)

2016-05-28

Hylleraas-CI is a superposition-of-configurations method in which each configuration is constructed from a Slater-type orbital (STO) product to which is appended (linearly) at most one interelectron distance r{sub ij}. Computations of the kinetic energy for atoms by this method have been difficult due to the lack of formulas expressing these matrix elements for general angular momentum in terms of overlap and potential-energy integrals. It is shown here that a strategic application of angular-momentum theory, including the use of vector spherical harmonics, enables the reduction of all atomic kinetic-energy integrals to overlap and potential-energy matrix elements. The new formulas are validated by showing that they yield correct results for a large number of integrals published by other investigators.

Integrative health coaching: an organizational case study.

Science.gov (United States)

Wolever, Ruth Q; Caldwell, Karen L; Wakefield, Jessica P; Little, Kerry J; Gresko, Jeanne; Shaw, Andrea; Duda, Linda V; Kosey, Julie M; Gaudet, Tracy

2011-01-01

The aim of this study was to describe integrative health (IH) coaching as developed in three different interventions offered through a major medical center, as a step toward further defining the field of health coaching. An organizational case study was conducted with document analysis and interviews. Interviewees were the first six IH coaches at Duke Integrative Medicine who provided 360 clients with individual and/or group coaching (two to 28 sessions) in a randomized clinical study and two work-site wellness programs. Qualitative analysis using the constant comparative method was conducted. Integrative health coaching is characterized by a process of self-discovery that informs goal setting and builds internal motivation by linking clients' goals to their values and sense of purpose. Time, commitment, and motivation are necessary in the IH coaching process. The underpinnings of IH coaching are distinct from the medical model, and the process is distinct from health education, executive coaching, and psychotherapy. Integrative health coaching fits well with the assumptions of integrative medicine and has a role in supporting behavior change. Copyright © 2011. Published by Elsevier Inc.

Study of fuel element characteristic of SM and SMP (SM-PRIMA) fuel assemblies

International Nuclear Information System (INIS)

Klinov, A.V.; Kuprienko, V.A.; Lebedev, V.A.; Makhin, V.M.; Tuchnin, L.M.; Tsykanov, V.A.

1999-01-01

The paper discusses the techniques and results of reactor tests and post-reactor investigations of the SM reactor fuel elements and fuel elements developed in the process of designing the specialized PRIMA test reactor with the SM reactor fuel elements used as a prototype and which are referred to as the SMP fuel elements. The behavior of fuel elements under normal operating conditions and under deviation from normal operating conditions was studied to verify the calculation techniques, to check the calculation results during preparation of the SM reactor safety substantiation report and to estimate the possibility of using such fuel elements in other projects. During tests of fuel rods under deviation from normal operating conditions their advantages were shown over fuel elements, the components of which were produced using the Al-based alloys. (author)

DISSOLVED CONCENTRATION LIMITS OF RADIOACTIVE ELEMENTS

Energy Technology Data Exchange (ETDEWEB)

NA

2004-11-22

The purpose of this study is to evaluate dissolved concentration limits (also referred to as solubility limits) of elements with radioactive isotopes under probable repository conditions, based on geochemical modeling calculations using geochemical modeling tools, thermodynamic databases, field measurements, and laboratory experiments. The scope of this modeling activity is to predict dissolved concentrations or solubility limits for 14 elements with radioactive isotopes (actinium, americium, carbon, cesium, iodine, lead, neptunium, plutonium, protactinium, radium, strontium, technetium, thorium, and uranium) important to calculated dose. Model outputs for uranium, plutonium, neptunium, thorium, americium, and protactinium are in the form of tabulated functions with pH and log (line integral) CO{sub 2} as independent variables, plus one or more uncertainty terms. The solubility limits for the remaining elements are either in the form of distributions or single values. The output data from this report are fundamental inputs for Total System Performance Assessment for the License Application (TSPA-LA) to determine the estimated release of these elements from waste packages and the engineered barrier system. Consistent modeling approaches and environmental conditions were used to develop solubility models for all of the actinides. These models cover broad ranges of environmental conditions so that they are applicable to both waste packages and the invert. Uncertainties from thermodynamic data, water chemistry, temperature variation, and activity coefficients have been quantified or otherwise addressed.

Customer Integration in Service Innovation: An Exploratory Study

Directory of Open Access Journals (Sweden)

Tim Straub

2013-09-01

Full Text Available Prominent industry projects, as well as an extensive literature suggest the importance of customer integration for companies’ innovation success. This appears to be especially true for service firms, which inherently build on customer interaction. Despite this appreciation of the approach, there are comparably few empirical analyses of the positive and negative effects of customer integration. In this exploratory study, we build on established customer role concepts to study the status quo of customer integration in industry, as well as reservations against the roles and negative experiences from customer integration projects. The study reveals a gap between reservations and actual negative experiences in losing know-how, as well as a positive effect of experience in customer integration on perceived benefits for the company.

A resolution of the integration region problem for the supermoduli space integral

Science.gov (United States)

Davis, Simon

2014-12-01

The integration region of the supermoduli space integral is defined in the super-Schottky group parametrization. The conditions on the super-period matrix elements are translated to relations on the parameters. An estimate of the superstring amplitude at arbitrary genus is sufficient for an evaluation of the cross-section to all orders in the expansion of the scattering matrix.

Finite element simulation of impact response of wire mesh screens

Directory of Open Access Journals (Sweden)

Wang Caizheng

2015-01-01

Full Text Available In this paper, the response of wire mesh screens to low velocity impact with blunt objects is investigated using finite element (FE simulation. The woven wire mesh is modelled with homogeneous shell elements with equivalent smeared mechanical properties. The mechanical behaviour of the woven wire mesh was determined experimentally with tensile tests on steel wire mesh coupons to generate the data for the smeared shell material used in the FE. The effects of impacts with a low mass (4 kg and a large mass (40 kg providing the same impact energy are studied. The joint between the wire mesh screen and the aluminium frame surrounding it is modelled using contact elements with friction between the corresponding elements. Damage to the screen of different types compromising its structural integrity, such as mesh separation and pulling out from the surrounding frame is modelled. The FE simulation is validated with results of impact tests conducted on woven steel wire screen meshes.

Diagnosis about Integration process of youth foreign Catalan

Directory of Open Access Journals (Sweden)

Marta Sabariego Puig

2015-09-01

Full Text Available This paper presents the results of a diagnostic study on the real integration process of young migrants in Catalonia. The study was carried out using a descriptive survey of 3,830 young Catalans from varying cultural backgrounds aged between 14 and 18, with the aim of identifying the key factors influencing the integration of Catalan migrant youth. Also, in order to analyze these key elements in greater depth as factors easing and/or obstructing integration, four discussion groups were held with the same young people. Results reveal achievements and challenges for further study, useful for the design of social and educational policies which may promote the integration process, understood in its structural, social, cognitive-cultural and identitary dimensions. Our study confirms the need for a society with pluralistic beliefs, principles and actions, which should be reflected in democratic systems and social and educational policies based on the concept of integration as reciprocity.

Uncovering the Repertoire of Endogenous Flaviviral Elements in Aedes Mosquito Genomes.

Science.gov (United States)

Suzuki, Yasutsugu; Frangeul, Lionel; Dickson, Laura B; Blanc, Hervé; Verdier, Yann; Vinh, Joelle; Lambrechts, Louis; Saleh, Maria-Carla

2017-08-01

Endogenous viral elements derived from nonretroviral RNA viruses have been described in various animal genomes. Whether they have a biological function, such as host immune protection against related viruses, is a field of intense study. Here, we investigated the repertoire of endogenous flaviviral elements (EFVEs) in Aedes mosquitoes, the vectors of arboviruses such as dengue and chikungunya viruses. Previous studies identified three EFVEs from Aedes albopictus cell lines and one from Aedes aegypti cell lines. However, an in-depth characterization of EFVEs in wild-type mosquito populations and individual mosquitoes in vivo has not been performed. We detected the full-length DNA sequence of the previously described EFVEs and their respective transcripts in several A. albopictus and A. aegypti populations from geographically distinct areas. However, EFVE-derived proteins were not detected by mass spectrometry. Using deep sequencing, we detected the production of PIWI-interacting RNA-like small RNAs, in an antisense orientation, targeting the EFVEs and their flanking regions in vivo The EFVEs were integrated in repetitive regions of the mosquito genomes, and their flanking sequences varied among mosquito populations. We bioinformatically predicted several new EFVEs from a Vietnamese A. albopictus population and observed variation in the occurrence of those elements among mosquitoes. Phylogenetic analysis of an A. aegypti EFVE suggested that it integrated prior to the global expansion of the species and subsequently diverged among and within populations. The findings of this study together reveal the substantial structural and nucleotide diversity of flaviviral integrations in Aedes genomes. Unraveling this diversity will help to elucidate the potential biological function of these EFVEs. IMPORTANCE Endogenous viral elements (EVEs) are whole or partial viral sequences integrated in host genomes. Interestingly, some EVEs have important functions for host fitness and

An introductory study of the convergence of the direct boundary element method

DEFF Research Database (Denmark)

Juhl, Peter Møller

1997-01-01

of an axisymmetric boundary element formulation is studied using linear, quadratic or superparametric elements. It is demonstrated that the rate of convergence of these formulations is reduced for calculations involving bodies with edges (geometric singularities). Two methods for improving the rate of convergence...

Drying results of K-Basin fuel element 0309M (Run 3)

International Nuclear Information System (INIS)

Oliver, B.M.; Klinger, G.S.; Abrefah, J.; Marschman, S.C.; MacFarlan, P.J.; Ritter, G.A.

1998-07-01

An N-Reactor outer fuel element that had been stored underwater in the Hanford 100 Area K-West Basin was subjected to a combination of low- and high-temperature vacuum drying treatments. These studies are part of a series of tests being conducted by Pacific Northwest National Laboratory on the drying behavior of spent nuclear fuel elements removed from both the K-West and K-East Basins. The drying test series was designed to test fuel elements that ranged from intact to severely damaged. The fuel element discussed in this report was removed from K-West canister 0309M during the second fuel selection campaign, conducted in 1996, and has remained in wet storage in the Postirradiation Testing Laboratory (PTL, 327 Building) since that time. The fuel element was broken in two pieces, with a relatively clean fracture, and the larger piece was tested. A gray/white coating was observed. This was the first test of a damaged fuel element in the furnace. K-West canisters can hold up to seven complete fuel assemblies, but, for purposes of this report, the element tested here is designated as Element 0309M. Element 0309M was subjected to drying processes based on those proposed under the Integrated Process Strategy, which included a hot drying step

An implicit finite element method for discrete dynamic fracture

Energy Technology Data Exchange (ETDEWEB)

Gerken, Jobie M. [Colorado State Univ., Fort Collins, CO (United States)

1999-12-01

A method for modeling the discrete fracture of two-dimensional linear elastic structures with a distribution of small cracks subject to dynamic conditions has been developed. The foundation for this numerical model is a plane element formulated from the Hu-Washizu energy principle. The distribution of small cracks is incorporated into the numerical model by including a small crack at each element interface. The additional strain field in an element adjacent to this crack is treated as an externally applied strain field in the Hu-Washizu energy principle. The resulting stiffness matrix is that of a standard plane element. The resulting load vector is that of a standard plane element with an additional term that includes the externally applied strain field. Except for the crack strain field equations, all terms of the stiffness matrix and load vector are integrated symbolically in Maple V so that fully integrated plane stress and plane strain elements are constructed. The crack strain field equations are integrated numerically. The modeling of dynamic behavior of simple structures was demonstrated within acceptable engineering accuracy. In the model of axial and transverse vibration of a beam and the breathing mode of vibration of a thin ring, the dynamic characteristics were shown to be within expected limits. The models dominated by tensile forces (the axially loaded beam and the pressurized ring) were within 0.5% of the theoretical values while the shear dominated model (the transversely loaded beam) is within 5% of the calculated theoretical value. The constant strain field of the tensile problems can be modeled exactly by the numerical model. The numerical results should therefore, be exact. The discrepancies can be accounted for by errors in the calculation of frequency from the numerical results. The linear strain field of the transverse model must be modeled by a series of constant strain elements. This is an approximation to the true strain field, so some

The equivalent internal orientation and position noise for contour integration.

Science.gov (United States)

Baldwin, Alex S; Fu, Minnie; Farivar, Reza; Hess, Robert F

2017-10-12

Contour integration is the joining-up of local responses to parts of a contour into a continuous percept. In typical studies observers detect contours formed of discrete wavelets, presented against a background of random wavelets. This measures performance for detecting contours in the limiting external noise that background provides. Our novel task measures contour integration without requiring any background noise. This allowed us to perform noise-masking experiments using orientation and position noise. From these we measure the equivalent internal noise for contour integration. We found an orientation noise of 6° and position noise of 3 arcmin. Orientation noise was 2.6x higher in contour integration compared to an orientation discrimination control task. Comparing against a position discrimination task found position noise in contours to be 2.4x lower. This suggests contour integration involves intermediate processing that enhances the quality of element position representation at the expense of element orientation. Efficiency relative to the ideal observer was lower for the contour tasks (36% in orientation noise, 21% in position noise) compared to the controls (54% and 57%).

Microlocal methods in the analysis of the boundary element method

DEFF Research Database (Denmark)

Pedersen, Michael

1993-01-01

The application of the boundary element method in numerical analysis is based upon the use of boundary integral operators stemming from multiple layer potentials. The regularity properties of these operators are vital in the development of boundary integral equations and error estimates. We show...

QUANTITATIVE СHARACTERISTICS OF COMPLEMENTARY INTEGRATED HEALTH CARE SYSTEM AND INTEGRATED MEDICATION MANAGEMENT INFORMATION SYSTEM

Directory of Open Access Journals (Sweden)

L. Yu. Babintseva

2015-05-01

i mportant elements of state regulation of the pharmaceutical sector health. For the first time creation of two information systems: integrated medication management infor mation system and integrated health care system in an integrated medical infor mation area, operating based on th e principle of complementarity was justified. Global and technological coefficients of these systems’ functioning were introduced.

Advantages of comparative studies in songbirds to understand the neural basis of sensorimotor integration.

Science.gov (United States)

Murphy, Karagh; James, Logan S; Sakata, Jon T; Prather, Jonathan F

2017-08-01

Sensorimotor integration is the process through which the nervous system creates a link between motor commands and associated sensory feedback. This process allows for the acquisition and refinement of many behaviors, including learned communication behaviors such as speech and birdsong. Consequently, it is important to understand fundamental mechanisms of sensorimotor integration, and comparative analyses of this process can provide vital insight. Songbirds offer a powerful comparative model system to study how the nervous system links motor and sensory information for learning and control. This is because the acquisition, maintenance, and control of birdsong critically depend on sensory feedback. Furthermore, there is an incredible diversity of song organizations across songbird species, ranging from songs with simple, stereotyped sequences to songs with complex sequencing of vocal gestures, as well as a wide diversity of song repertoire sizes. Despite this diversity, the neural circuitry for song learning, control, and maintenance remains highly similar across species. Here, we highlight the utility of songbirds for the analysis of sensorimotor integration and the insights about mechanisms of sensorimotor integration gained by comparing different songbird species. Key conclusions from this comparative analysis are that variation in song sequence complexity seems to covary with the strength of feedback signals in sensorimotor circuits and that sensorimotor circuits contain distinct representations of elements in the vocal repertoire, possibly enabling evolutionary variation in repertoire sizes. We conclude our review by highlighting important areas of research that could benefit from increased comparative focus, with particular emphasis on the integration of new technologies. Copyright © 2017 the American Physiological Society.

Biomonitoring of trace metal elements by lichens of the Western Pyrenees.Study of elemental and isotopic signature of mercury

OpenAIRE

Queipo Abad, Silvia

2012-01-01

The lichens, organisms originated by symbiotic relationship between an algae and a fungus, have shown good properties as biomonitors of pollution from Trace Metal Elements. They can be used as indicators of local and long-range atmospheric pollution. The assessment of deposition of atmospheric pollutants results difficult to know their long term impact. This happens specially when the study is focalized in remote areas. In this project it has been developed the elemental and isotopic analy...

Lustre filesystem for CMS storage element (SE)

International Nuclear Information System (INIS)

Wu, Y; Kim, B; Avery, P; Fu, Y; Bourilkov, D; Taylor, C; Prescott, C; Rodriguez, J

2011-01-01

This paper presents our effort to integrate the Lustre filesystem with BeStMan, GridFTP and Ganglia to make it a fully functional WLCG SE (Storage Element). We first describe the configuration of our Lustre filesystem at the University of Florida and our integration process. We then present benchmark performance figures and IO rates from the CMS analysis jobs and the WAN data transfer performance that are conducted on the Lustre SE.

B2B collaboration method through trust values for e-supply chain integrator: a case study of Malaysian construction industry

Science.gov (United States)

Ab. Aziz, Norshakirah; Ahmad, Rohiza; Dhanapal Durai, Dominic

2011-12-01

Limited trust, cooperation and communication have been identified as some of the issues that hinder collaboration among business partners. These one also true in the acceptance of e-supply chain integrator among organizations that involve in the same industry. On top of that, the huge number of components in supply chain industry also makes it impossible to include entire supply chain components in the integrator. Hence, this study intends to propose a method for identifying "trusted" collaborators for inclusion into an e-supply chain integrator. For the purpose of constructing and validating the method, the Malaysian construction industry is chosen as the case study due to its size and importance to the economy. This paper puts forward the background of the research, some relevant literatures which lead to trust values elements formulation, data collection from Malaysian Construction Supply Chain and a glimpse of the proposed method for trusted partner selection. Future work is also presented to highlight the next step of this research.

Studies of trace element imbalances in Alzheimer's disease using sequential NAA

International Nuclear Information System (INIS)

Ehmann, W.D.; Markesbery, W.R.; Thompson, C.M.; Vance, D.E.; Mao, Y.

1986-01-01

Evidence has accumulated in the literature that trace elements may be implicated in the etiology of Alzheimer's disease (AD) and other age-related neurological diseases. Even if elemental imbalances do not prove to be causative factors, observed perturbations may be markers that could aid in diagnosis, or help elucidate pathological processes. In this paper the authors present new data for trace element levels in three areas of the human brain most severely affected by AD (hippocampus, amygdala, and nucleus basalis) and in AD hair and nail samples. In some cases the specific imbalances seen previously in the bulk brain analyses are amplified in these regions. Elevated bromine levels seen in AD brain are also observed in AD hair and nail. Significant alkali metal and mercury imbalances with respect to controls occur in AD nail samples. The role of these trace element alterations in the etiology of AD has still not been determined. However, some possible physiological effects include: membrane dysfunction (alkali metals), enzyme inhibition (mercury and bromine), and interference with neurotransmitter functions (mercury, bromine, and alkali metals). The simultaneous multielement capability of this sequential NAA procedure also permits interelement correlation studies. Elemental associations may help identify potential environmental factors that could contribute to the observed trace element imbalances

A refined element-based Lagrangian shell element for geometrically nonlinear analysis of shell structures

Directory of Open Access Journals (Sweden)

Woo-Young Jung

2015-04-01

Full Text Available For the solution of geometrically nonlinear analysis of plates and shells, the formulation of a nonlinear nine-node refined first-order shear deformable element-based Lagrangian shell element is presented. Natural co-ordinate-based higher order transverse shear strains are used in present shell element. Using the assumed natural strain method with proper interpolation functions, the present shell element generates neither membrane nor shear locking behavior even when full integration is used in the formulation. Furthermore, a refined first-order shear deformation theory for thin and thick shells, which results in parabolic through-thickness distribution of the transverse shear strains from the formulation based on the third-order shear deformation theory, is proposed. This formulation eliminates the need for shear correction factors in the first-order theory. To avoid difficulties resulting from large increments of the rotations, a scheme of attached reference system is used for the expression of rotations of shell normal. Numerical examples demonstrate that the present element behaves reasonably satisfactorily either for the linear or for geometrically nonlinear analysis of thin and thick plates and shells with large displacement but small strain. Especially, the nonlinear results of slit annular plates with various loads provided the benchmark to test the accuracy of related numerical solutions.

The study of the elemental composition of peppermint (Mentha piperita

Directory of Open Access Journals (Sweden)

K. V. Andrianov

2014-12-01

Full Text Available Introduction Our attention was drawn by quite widespread plant, namely peppermint (Mentha piperita of mint family (Lamiaceae L.. It isn’t known as a wild-growing plant, this plant is the hybrid received from crossing water mint (Mentha aquatica with a spicate mint (Mentha spicata or green mint (Mentha viridis. Therapeutic action of plant is caused by the BAS complex, among which essential oil, alkaloids, saponins, organic acids, vitamins, macro - and microelements are. Accumulation of elements in a plant directly depends on sort and species of this plant, climatic conditions and geographical places of growth. Thus, using pharmacognosic research of peppermint, it would be expedient to carry out the comparative analysis of the elements content in leaf of widespread species of this plant, and also to compare to element structure of peppermint from other region of preparation. Studying qualitative structure and quantitative content of macro - and microelements in leaf of 3 samples of peppermint became the purpose of our research. Materials and methods of research The peppermint leaves of 3 samples were the object of our research. They are ‘Chornolistaya’ sort – the sample #1, ‘Zgadka’ sort – the sample #2 (the stocking up place is Dnepropetrovsk region, 2013 and peppermint - the sample #3 (the stocking place is Lebanon, Baalbek surroundings, 2013. In order to study elemental structure of peppermint leaves, atomic emission spectrometry with photographic registration was used. Results and discussions All types of raw materials had identical element structure. According to the content in each type of raw materials, compositions can be divided into some groups: the first one – the content of element was near or above 1000 mg /100 g, the content was higher than 100 mg /100 g, the content of composition was lower than 100 mg /100 g and below than 1 mg /100 g. Thus, the ambit between these groups was deeply emphasized. The following

Genomic patterns associated with paternal/maternal distribution of transposable elements

Science.gov (United States)

Jurka, Jerzy

2003-03-01

Transposable elements (TEs) are specialized DNA or RNA fragments capable of surviving in intragenomic niches. They are commonly, perhaps unjustifiably referred to as "selfish" or "parasitic" elements. TEs can be divided in two major classes: retroelements and DNA transposons. The former include non-LTR retrotransposons and retrovirus-like elements, using reverse transriptase for their reproduction prior to integration into host DNA. The latter depend mostly on host DNA replication, with possible exception of rolling-circle transposons recently discovered by our team. I will review basic information on TEs, with emphasis on human Alu and L1 retroelements discussed in the context of genomic organization. TEs are non-randomly distributed in chromosomal DNA. In particular, human Alu elements tend to prefer GC-rich regions, whereas L1 accumulate in AT-rich regions. Current explanations of this phenomenon focus on the so called "target effects" and post-insertional selection. However, the proposed models appear to be unsatisfactory and alternative explanations invoking "channeling" to different chromosomal regions will be a major focus of my presentation. Transposable elements (TEs) can be expressed and integrated into host DNA in the male or female germlines, or both. Different models of expression and integration imply different proportions of TEs on sex chromosomes and autosomes. The density of recently retroposed human Alu elements is around three times higher on chromosome Y than on chromosome X, and over two times higher than the average density for all human autosomes. This implies Alu activity in paternal germlines. Analogous inter-chromosomal proportions for other repeat families should determine their compatibility with one of the three basic models describing the inheritance of TEs. Published evidence indicates that maternally and paternally imprinted genes roughly correspond to GC-rich and AT-rich DNA. This may explain the observed chromosomal distribution of

A combined finite element-boundary integral formulation for solution of two-dimensional scattering problems via CGFFT. [Conjugate Gradient Fast Fourier Transformation

Science.gov (United States)

Collins, Jeffery D.; Volakis, John L.; Jin, Jian-Ming

1990-01-01

A new technique is presented for computing the scattering by 2-D structures of arbitrary composition. The proposed solution approach combines the usual finite element method with the boundary-integral equation to formulate a discrete system. This is subsequently solved via the conjugate gradient (CG) algorithm. A particular characteristic of the method is the use of rectangular boundaries to enclose the scatterer. Several of the resulting boundary integrals are therefore convolutions and may be evaluated via the fast Fourier transform (FFT) in the implementation of the CG algorithm. The solution approach offers the principal advantage of having O(N) memory demand and employs a 1-D FFT versus a 2-D FFT as required with a traditional implementation of the CGFFT algorithm. The speed of the proposed solution method is compared with that of the traditional CGFFT algorithm, and results for rectangular bodies are given and shown to be in excellent agreement with the moment method.

Experimental study on radiation resistant properties of seismic isolation elements

International Nuclear Information System (INIS)

Yoneda, G.; Nojima, O.; Aizawa, S.; Uchiyama, Y.; Ikenaga, M.; Yoshizawa, T.

1991-01-01

Recently, studies on the application of a seismic isolation system to a reactor building and or the equipment of a nuclear power plant has been carried out. This study aims at investigating the influence which is exerted upon the mechanical properties of the seismic isolation elements by radiation. The authors conducted irradiation tests, using γ rays, on natural rubber bearings (NRB), lead rubber bearings (LRB), high damping rubber bearings (HRB), and the viscous fluid used in viscous dampers. The maximum radiation intensity was 5 x 10 7 R (Roentgen). The comparison between the mechanical properties of each seismic isolation element before and after the irradiation test are reported in the following. (author)

Magnetic bead micromixer: Influence of magnetic element geometry and field amplitude

DEFF Research Database (Denmark)

Lund-Olesen, Torsten; Buus, Bjarke B.; Howalt, Jakob

2008-01-01

A scheme for the silicon microfabrication of lab-on-a-chip systems with mixing based on dynamic plugs of magnetic beads is presented. The systems consist of a microfluidic channel integrated with a number of soft magnetic elements by the sides of the channel. The elements are magnetized by a homo......A scheme for the silicon microfabrication of lab-on-a-chip systems with mixing based on dynamic plugs of magnetic beads is presented. The systems consist of a microfluidic channel integrated with a number of soft magnetic elements by the sides of the channel. The elements are magnetized...... by a homogeneous external ac magnetic field. The systems are scalable with respect to the number of magnetic bead plugs and number of parallel channels, and thus they have high potential for use in biological separation using functionalized magnetic beads. The mixing efficiency is characterized for two different...

A Galleria Boundary Element Method for two-dimensional nonlinear magnetostatics

Science.gov (United States)

Brovont, Aaron D.

The Boundary Element Method (BEM) is a numerical technique for solving partial differential equations that is used broadly among the engineering disciplines. The main advantage of this method is that one needs only to mesh the boundary of a solution domain. A key drawback is the myriad of integrals that must be evaluated to populate the full system matrix. To this day these integrals have been evaluated using numerical quadrature. In this research, a Galerkin formulation of the BEM is derived and implemented to solve two-dimensional magnetostatic problems with a focus on accurate, rapid computation. To this end, exact, closed-form solutions have been derived for all the integrals comprising the system matrix as well as those required to compute fields in post-processing; the need for numerical integration has been eliminated. It is shown that calculation of the system matrix elements using analytical solutions is 15-20 times faster than with numerical integration of similar accuracy. Furthermore, through the example analysis of a c-core inductor, it is demonstrated that the present BEM formulation is a competitive alternative to the Finite Element Method (FEM) for linear magnetostatic analysis. Finally, the BEM formulation is extended to analyze nonlinear magnetostatic problems via the Dual Reciprocity Method (DRBEM). It is shown that a coarse, meshless analysis using the DRBEM is able to achieve RMS error of 3-6% compared to a commercial FEM package in lightly saturated conditions.

A new 3-D integral code for computation of accelerator magnets

International Nuclear Information System (INIS)

Turner, L.R.; Kettunen, L.

1991-01-01

For computing accelerator magnets, integral codes have several advantages over finite element codes; far-field boundaries are treated automatically, and computed field in the bore region satisfy Maxwell's equations exactly. A new integral code employing edge elements rather than nodal elements has overcome the difficulties associated with earlier integral codes. By the use of field integrals (potential differences) as solution variables, the number of unknowns is reduced to one less than the number of nodes. Two examples, a hollow iron sphere and the dipole magnet of Advanced Photon Source injector synchrotron, show the capability of the code. The CPU time requirements are comparable to those of three-dimensional (3-D) finite-element codes. Experiments show that in practice it can realize much of the potential CPU time saving that parallel processing makes possible. 8 refs., 4 figs., 1 tab

Nondestructive examination techniques on Candu fuel elements

International Nuclear Information System (INIS)

Gheorghe, G.; Man, I.

2013-01-01

During irradiation in nuclear reactor, fuel elements undergo dimensional and structural changes, and changes of surface conditions sheath as well, which can lead to damages and even loss of integrity. Visual examination and photography of Candu fuel elements are among the non-destructive examination techniques, next to dimensional measurements that include profiling (diameter, bending, camber) and length, sheath integrity control with eddy currents, measurement of the oxide layer thickness by eddy current techniques. Unirradiated Zircaloy-4 tubes were used for calibration purposes, whereas irradiated Zircaloy-4 tubes were actually subjected to visual inspection and dimensional measurements. We present results of measurements done by eddy current techniques on Zircaloy- 4 tubes, unirradiated, but oxidized in an autoclave prior to examinations. The purpose of these nondestructive examination techniques is to determine those parameters that characterize the behavior and performance of nuclear fuel operation. (authors)

The INTEGRAL Core Observing Programme

DEFF Research Database (Denmark)

Winkler, C.; Gehrels, N.; Lund, Niels

1999-01-01

The Core Programme of the INTEGRAL mission is defined as the portion of the scientific programme covering the guaranteed time observations for the INTEGRAL Science Working Team. This paper describes the current status of the Core Programme preparations and summarizes the key elements...... of the observing programme....

Integrated Project Teams - An Essential Element of Project Management during Project Planning and Execution - 12155

Energy Technology Data Exchange (ETDEWEB)

Burritt, James G.; Berkey, Edgar [Longenecker and Associates, Las Vegas, NV 89135 (United States)

2012-07-01

Managing complex projects requires a capable, effective project manager to be in place, who is assisted by a team of competent assistants in various relevant disciplines. This team of assistants is known as the Integrated Project Team (IPT). he IPT is composed of a multidisciplinary group of people who are collectively responsible for delivering a defined project outcome and who plan, execute, and implement over the entire life-cycle of a project, which can be a facility being constructed or a system being acquired. An ideal IPT includes empowered representatives from all functional areas involved with a project-such as engineering design, technology, manufacturing, test and evaluation, contracts, legal, logistics, and especially, the customer. Effective IPTs are an essential element of scope, cost, and schedule control for any complex, large construction project, whether funded by DOE or another organization. By recently assessing a number of major, on-going DOE waste management projects, the characteristics of high performing IPTs have been defined as well as the reasons for potential IPT failure. Project managers should use IPTs to plan and execute projects, but the IPTs must be properly constituted and the members capable and empowered. For them to be effective, the project manager must select the right team, and provide them with the training and guidance for them to be effective. IPT members must treat their IPT assignment as a primary duty, not some ancillary function. All team members must have an understanding of the factors associated with successful IPTs, and the reasons that some IPTs fail. Integrated Project Teams should be used by both government and industry. (authors)

Playing with Gladys: A case study integrating drama therapy with behavioural interventions for the treatment of selective mutism.

Science.gov (United States)

Oon, Phei Phei

2010-04-01

This case study examines an integrative approach combining drama therapy and the behavioural skill "shaping", as offered to Gladys, a 5-year-old girl diagnosed with selective mutism. This study found that shaping, when implemented in the context of play, with play as the primary reinforcer, elicited from Gladys vocalization and eventually speech within a very short time. Her vocalizations allowed her to enter dramatic play, which in turn propelled spontaneous speech. This article looks at how the three elements of dramatherapy - the playspace, role-playing and dramatic projection - brought about therapeutic changes for Gladys. Aside from spontaneous speech, Gladys also developed positive self-esteem and a heightened sense of spontaneity. Subsequently, these two qualities helped her generalize her speech to new settings on her own. Gladys's newly harnessed spontaneity further helped her become more sociable and resilient.This study advances the possibility of integrating a behavioural skill with drama therapy for the therapeutic benefits of a child with an anxiety-related condition like selective mutism.

Numerical Investigations on Several Stabilized Finite Element Methods for the Stokes Eigenvalue Problem

Directory of Open Access Journals (Sweden)

Pengzhan Huang

2011-01-01

Full Text Available Several stabilized finite element methods for the Stokes eigenvalue problem based on the lowest equal-order finite element pair are numerically investigated. They are penalty, regular, multiscale enrichment, and local Gauss integration method. Comparisons between them are carried out, which show that the local Gauss integration method has good stability, efficiency, and accuracy properties, and it is a favorite method among these methods for the Stokes eigenvalue problem.

Implicit three-dimensional finite-element formulation for the nonlinear structural response of reactor components

International Nuclear Information System (INIS)

Kulak, R.F.; Belytschko, T.B.

1975-09-01

The formulation of a finite-element procedure for the implicit transient and static analysis of plate/shell type structures in three-dimensional space is described. The triangular plate/shell element can sustain both membrane and bending stresses. Both geometric and material nonlinearities can be treated, and an elastic-plastic material law has been incorporated. The formulation permits the element to undergo arbitrarily large rotations and translations; but, in its present form it is restricted to small strains. The discretized equations of motion are obtained by a stiffness method. An implicit integration algorithm based on trapezoidal integration formulas is used to integrate the discretized equations of motion in time. To ensure numerical stability, an iterative solution procedure with equilibrium checks is used

ICEApl1, an integrative conjugative element related to ICEHin1056, identified in the pig pathogen Actinobacillus pleuropneumoniae

Directory of Open Access Journals (Sweden)

Janine T Bosse

2016-06-01

Full Text Available ICEApl1 was identified in the whole genome sequence of MIDG2331, a tetracycline-resistant (MIC = 8 mg/L serovar 8 clinical isolate of Actinobacillus pleuropneumoniae, the causative agent of porcine pleuropneumonia. PCR amplification of virB4, one of the core genes involved in conjugation, was used to identify other A. pleuropneumoniae isolates potentially carrying ICEApl1. MICs for tetracycline were determined for virB4 positive isolates, and shotgun whole genome sequence analysis was used to confirm presence of the complete ICEApl1. The sequence of ICEApl1 is 56083 bp long and contains 67 genes including a Tn10 element encoding tetracycline resistance. Comparative sequence analysis was performed with similar integrative conjugative elements (ICEs found in other members of the Pasteurellaceae. ICEApl1 is most similar to the 59393 bp ICEHin1056, from Haemophilus influenzae strain 1056. Although initially identified only in serovar 8 isolates of A. pleuropneumoniae (31 from the UK and 1 from Cyprus, conjugal transfer of ICEApl1 to representative isolates of other serovars was confirmed. All isolates carrying ICEApl1 had a MIC for tetracycline of 8 mg/L. This is, to our knowledge, the first description of an ICE in A. pleuropneumoniae, and the first report of a member of the ICEHin1056 subfamily in a non-human pathogen. ICEApl1 confers resistance to tetracycline, currently one of the more commonly used antibiotics for treatment and control of porcine pleuropneumonia.

International Congress on Transposable elements (ICTE 2016 in Saint Malo: mobile elements under the sun of Brittany

Directory of Open Access Journals (Sweden)

Pascale Lesage

2016-10-01

Full Text Available Abstract The third international conference on Transposable Elements (ICTE was held 16–19 April 2016 in Saint Malo, France. Organized by the French Transposition Community (Research group of the CNRS: “Mobile genetic elements: from mechanism to populations, an integrative approach” and the French Society of Genetics, the conference’s goal was to bring together researchers who study transposition in diverse organisms, using multiple experimental approaches. The meeting gathered 180 participants from all around the world. Most of them contributed through poster presentations, invited talks and short talks selected from poster abstracts. The talks were organized into six scientific sessions: “Taming mobile DNA: self and non-self recognition”; “Trans-generational inheritance”; “Mobile DNA genome structure and organization, from molecular mechanisms to applications”; “Remembrance of (retrotransposon past: mobile DNA in genome evolution”; and finally “The yin and the yang of mobile DNA in human health”.

A conserved helicase processivity factor is needed for conjugation and replication of an integrative and conjugative element.

Directory of Open Access Journals (Sweden)

Jacob Thomas

Full Text Available Integrative and conjugative elements (ICEs are agents of horizontal gene transfer and have major roles in evolution and acquisition of new traits, including antibiotic resistances. ICEs are found integrated in a host chromosome and can excise and transfer to recipient bacteria via conjugation. Conjugation involves nicking of the ICE origin of transfer (oriT by the ICE-encoded relaxase and transfer of the nicked single strand of ICE DNA. For ICEBs1 of Bacillus subtilis, nicking of oriT by the ICEBs1 relaxase NicK also initiates rolling circle replication. This autonomous replication of ICEBs1 is critical for stability of the excised element in growing cells. We found a conserved and previously uncharacterized ICE gene that is required for conjugation and replication of ICEBs1. Our results indicate that this gene, helP (formerly ydcP, encodes a helicase processivity factor that enables the host-encoded helicase PcrA to unwind the double-stranded ICEBs1 DNA. HelP was required for both conjugation and replication of ICEBs1, and HelP and NicK were the only ICEBs1 proteins needed for replication from ICEBs1 oriT. Using chromatin immunoprecipitation, we measured association of HelP, NicK, PcrA, and the host-encoded single-strand DNA binding protein Ssb with ICEBs1. We found that NicK was required for association of HelP and PcrA with ICEBs1 DNA. HelP was required for association of PcrA and Ssb with ICEBs1 regions distal, but not proximal, to oriT, indicating that PcrA needs HelP to progress beyond nicked oriT and unwind ICEBs1. In vitro, HelP directly stimulated the helicase activity of the PcrA homologue UvrD. Our findings demonstrate that HelP is a helicase processivity factor needed for efficient unwinding of ICEBs1 for conjugation and replication. Homologues of HelP and PcrA-type helicases are encoded on many known and putative ICEs. We propose that these factors are essential for ICE conjugation, replication, and genetic stability.

Wind-Battery-Hydrogen Integration Study

Energy Technology Data Exchange (ETDEWEB)

Fingersh, L. J.

2004-05-01

A study was performed to examine the possibility of using batteries and Hydrogen systems to add dispatchability to wind power. A second study examined the production of hydrogen by wind power for sale into a fuels market. Calendar year 2002 load information from the California ISO was combined with 2002 generated wind power from the Lake Benton wind farm in Minnesota. Control systems were developed and optimized, and grid operation for 2002 was simulated with batteries, electrolyzers, fuel cells or other elements. This report presents the results of the two studies.

Studies of flerovium and element 115 homologs with macrocyclic extractants

Science.gov (United States)

Despotopulos, John Dustin

Study of the chemistry of the heaviest elements, Z ? 104, poses a unique challenge due to their low production cross-sections and short half-lives. Chemistry also must be studied on the one-atom-at-a-time scale, requiring automated, fast, and very efficient chemical schemes. Recent studies of the chemical behavior of copernicium (Cn, element 112) and flerovium (Fl, element 114) together with the discovery of isotopes of these elements with half-lives suitable for chemical studies have spurred a renewed interest in the development of rapid systems designed to study the chemical properties of elements with Z ≥ 114. This dissertation explores both extraction chromatography and solvent extraction as methods for development of a rapid chemical separation scheme for the homologs of flerovium (Pb, Sn, Hg) and element 115 (Bi, Sb), with the goal of developing a chemical scheme that, in the future, can be applied to on-line chemistry of both Fl and element 115. Macrocyclic extractants, specifically crown ethers and their derivatives, were chosen for these studies. Carrier-free radionuclides, used in these studies, of the homologs of Fl and element 115 were obtained by proton activation of high purity metal foils at the Lawrence Livermore National Laboratory (LLNL) Center for Accelerator Mass Spectrometry (CAMS): natIn(p,n)113Sn, natSn(p,n)124Sb, and Au(p,n)197m,gHg. The carrier-free activity was separated from the foils by novel separation schemes based on ion exchange and extraction chromatography techniques. Carrier-free Pb and Bi isotopes were obtained from development of a novel generator based on cation exchange chromatography using the 232U parent to generate 212Pb and 212Bi. Crown ethers show high selectivity for metal ions based on their size compared to the negatively charged cavity of the ether. Extraction by crown ethers occur based on electrostatic ion-dipole interactions between the negatively charged ring atoms (oxygen, sulfur, etc.) and the positively

Studies on rare earth elements in seawater and uptake by marine organisms

International Nuclear Information System (INIS)

Suzuki, H.; Koyanagi, T.; Saiki, M.

1975-01-01

The contents of rare earth elements in marine environmental samples were determined by neutron activation analysis to examine the existing state in coastal seawater and the concentration by marine organisms of the elements. Seawater was filtered through a Millipore filter GS (pore size 0.22 μm), before the analysis. Some of the seawater was treated with HC1 solution before filtration and some after filtration. Certain marine organisms were also analysed for determination of rare earth elements. These were: flounder (Paralichthys olivaceus); yellowtails (Seriola quinqueradiata); immature anchovy (Engraulis japonica); clams (Meretrix lusoria); green algae (Ulva pertusa); brown algae (Hizikia fusiforme, Sargassum fulvellum, Undaria pinnatifida). In the seawater without HC1 treatment before filtration, considerable amounts of the elements existed in residue on the filter, whereas in the seawater treated with HC1 before filtration, the greater part remained in the dissolved state. Concentration factors calculated from the contents of stable elements, therefore, are affected remarkably by the existing state of the elements in seawater. If only the dissolved state is assumed available for marine organisms, values one order higher are attained compared with the case where total amounts of the elements were used for the calculation. However, the contribution of the insoluble state seems to be not negligible with some organisms. The higher concentration factors for immature anchovy and clams observed in this study were considered to be caused by surface adsorption of elements in particulate form and also ingested sediment with high element concentration. (author)

Studies of kinematic elements in two multicenter sunspot groups

International Nuclear Information System (INIS)

Korobova, Z.B.

1983-01-01

Some features of kinematic elements (KE) in two multicenter sunspot groups were studied using Tashkent full-disc white light heliograms. KE and morphological elements do not reveal any relationship. A KE coincides with a unipolar or multipolar spot or with part of a spot. It may also contain an extended stream including several spots. Relation of KE to large-scale photospheric magnetic fields is less clear. The line of polarity reversal is, in most cases, the deviding line between two adjacent KE. At the same time, a KE can contain spots of both polarities. Sunspot trajectories in the leading polarity regions show the best similarity. Interactions of KE are greatly influenced by the meridional drift. (author)

The Study Abroad Experience: A Crucial Element in Globalizing Business School Programs

Science.gov (United States)

Mangiero, George A.; Kraten, Michael

2011-01-01

Globalization is a fundamental reality of modern business practice. Participation in a study abroad program is a crucial element in helping students become well rounded global business leaders; it is an increasingly important element of a well rounded business curriculum. A semester or summer abroad, properly conceived and designed, can provide…

Life sciences payload definition and integration study, task C and D. Volume 2: Payload definition, integration, and planning studies

Science.gov (United States)

1973-01-01

The Life Sciences Payload Definition and Integration Study was composed of four major tasks. Tasks A and B, the laboratory definition phase, were the subject of prior NASA study. The laboratory definition phase included the establishment of research functions, equipment definitions, and conceptual baseline laboratory designs. These baseline laboratories were designated as Maxi-Nom, Mini-30, and Mini-7. The outputs of Tasks A and B were used by the NASA Life Sciences Payload Integration Team to establish guidelines for Tasks C and D, the laboratory integration phase of the study. A brief review of Tasks A and B is presented provide background continuity. The tasks C and D effort is the subject of this report. The Task C effort stressed the integration of the NASA selected laboratory designs with the shuttle sortie module. The Task D effort updated and developed costs that could be used by NASA for preliminary program planning.

Geochemical study of trace elements in micrograin minerals

Energy Technology Data Exchange (ETDEWEB)

Toyoda, Kazuhiro; Shinozuka, Yoshitsugu; Imai, Shiho; Baba, Naoho; Machii, Tami; Shimada, Mitsuo; Hasebe, Kiyoshi [Hokkaido Univ., Sapporo (Japan)

1998-01-01

Abstract of five papers are contained in this paper. 1. Neutron activation analysis of iridium in Japan P/T boundary layer sample. Iridium of Permian/Triassic (P/T) boundary layer samples in Japan are determined. A collision of materials outside of the earth was not proved. 2. Adsorbability of rare earth elements by biogenic phosphate salt particles. Phosphate minerals are very strong adsorbent of rare earth elements, so that they can use as the removal materials of them in radioactive waste. 3. Analysis of undecomposed minerals and irresoluble compounds in acid decomposed residue. In order to investigate the past global changes, a micro wave heat method was studied and good results were obtained. 4. Determination of iridium in tsunami deposits in Cuba. Very small amount of iridium was discovered in the samples. 5. Activation analysis of iridium in the sample of 300 m core of Baikal lake. (Plan). (S.Y.)

Gauss-Kronrod-Trapezoidal Integration Scheme for Modeling Biological Tissues with Continuous Fiber Distributions

Science.gov (United States)

Hou, Chieh; Ateshian, Gerard A.

2015-01-01

Fibrous biological tissues may be modeled using a continuous fiber distribution (CFD) to capture tension-compression nonlinearity, anisotropic fiber distributions, and load-induced anisotropy. The CFD framework requires spherical integration of weighted individual fiber responses, with fibers contributing to the stress response only when they are in tension. The common method for performing this integration employs the discretization of the unit sphere into a polyhedron with nearly uniform triangular faces (finite element integration or FEI scheme). Although FEI has proven to be more accurate and efficient than integration using spherical coordinates, it presents three major drawbacks: First, the number of elements on the unit sphere needed to achieve satisfactory accuracy becomes a significant computational cost in a finite element analysis. Second, fibers may not be in tension in some regions on the unit sphere, where the integration becomes a waste. Third, if tensed fiber bundles span a small region compared to the area of the elements on the sphere, a significant discretization error arises. This study presents an integration scheme specialized to the CFD framework, which significantly mitigates the first drawback of the FEI scheme, while eliminating the second and third completely. Here, integration is performed only over the regions of the unit sphere where fibers are in tension. Gauss-Kronrod quadrature is used across latitudes and the trapezoidal scheme across longitudes. Over a wide range of strain states, fiber material properties, and fiber angular distributions, results demonstrate that this new scheme always outperforms FEI, sometimes by orders of magnitude in the number of computational steps and relative accuracy of the stress calculation. PMID:26291492

Aerodynamic and thermal studies of cans of gas cooled fuel elements

International Nuclear Information System (INIS)

Gelin, P.

1964-01-01

Research on clusters was undertaken at the CEA in 1959, while studies on herring-bone cans were developed at the EDF Laboratory at Chatou and the CEA laboratory at Saclay at the end of 1959. In 1962, a general study on corrugations was begun at the Saclay Laboratory with a view to improving the clusters, and continued later in both laboratories relative to the internal cooling of annular fuel elements. As these studies progressed, trial facilities were extended while experimental methods have improved constantly. At the present time, both laboratories, working in complete collaboration, have powerful means at their disposal. Work on the clusters has been concerned chiefly with pressure losses due to the assembly parts, and with the temperature variations around the elements of the cluster. In this way, we have been able to determine satisfactorily the hot points of the can, the deformations of the rods and the conditions of stability of these deformations. In the case of the herring-bone cans, studies have been directed to the evolution of performances as a function of the geometric parameters on the one hand, and to the special aerodynamic and thermal features caused by the fins and by interruptions of cartridge on the other hand. These studies have led to a very thorough knowledge of the cartridges chosen for the reactors EDF 2 and EDF 3, and now open up very hopeful prospects for future reactors, particularly those fitted with annular elements; among the alternatives suitable for the inner surface of the annular element can, corrugations and longitudinal fins have been fairly extensively tested over a wide range of Reynolds number. (authors) [fr

Reinforced flexural elements for TEMP-STRESS Program

International Nuclear Information System (INIS)

Marchertas, A.H.; Kennedy, J.M.; Pfeiffer, P.A.

1987-06-01

The implementation of reinforced flexural elements into the thermal-mechanical finite element program TEMP-STRESS is described. With explicit temporal integration and dynamic relaxation capabilities in the program, the flexural elements provide an efficient method for the treatment of reinforced structures subjected to transient and static loads. The capability of the computer program is illustrated by the solution of several examples: the simulation of a reinforced concrete beam; simulations of a reinforced concrete containment shell which is subjected to internal pressurization, thermal gradients through the walls, and transient pressure loads. The results of this analysis are relevant in the structural design/safety evaluations of typical reactor containment structures. 22 refs., 13 figs

Ring-element analysis of layered orthotropic bodies

DEFF Research Database (Denmark)

Jørgensen, O.

1993-01-01

For the analysis of arbitrarily laminated circular bodies, a displacement-based ring-element is presented. The analysis is performed in a cylindrical coordinate system. The method of analysis requires the boundary conditions as well as the external forces to be pi-periodic. The element formulation...... accounts for a desired degree of approximation of the displacement field in the direction of the circumference. This is done by a truncated Fourier expansion of the angular dependence of the displacements in terms of trigonometric functions. Thus the Fourier expansion coefficients are the unknowns...... to that of solutions obtained by traditional 3D elements. A scheme for analytical integration of the angular dependence of the stiffness matrix is given....

Nonlinear dynamic analysis using Petrov-Galerkin natural element method

International Nuclear Information System (INIS)

Lee, Hong Woo; Cho, Jin Rae

2004-01-01

According to our previous study, it is confirmed that the Petrov-Galerkin Natural Element Method (PG-NEM) completely resolves the numerical integration inaccuracy in the conventional Bubnov-Galerkin Natural Element Method (BG-NEM). This paper is an extension of PG-NEM to two-dimensional nonlinear dynamic problem. For the analysis, a constant average acceleration method and a linearized total Lagrangian formulation is introduced with the PG-NEM. At every time step, the grid points are updated and the shape functions are reproduced from the relocated nodal distribution. This process enables the PG-NEM to provide more accurate and robust approximations. The representative numerical experiments performed by the test Fortran program, and the numerical results confirmed that the PG-NEM effectively and accurately approximates the nonlinear dynamic problem

Recent advances in boundary element methods

CERN Document Server

Manolis, GD

2009-01-01

Addresses the needs of the computational mechanics research community in terms of information on boundary integral equation-based methods and techniques applied to a variety of fields. This book collects both original and review articles on contemporary Boundary Element Methods (BEM) as well as on the Mesh Reduction Methods (MRM).

Government Advertising: an integrative element. The legal framework in Spain

Directory of Open Access Journals (Sweden)

Dr. Ricardo Vizcaíno-Laorga

2008-01-01

Full Text Available Immigration in Spain has had a special increase last ten years. America is a main origin. The advertising from companies is similar like few years ago, but the context has changed. Advertising from Government is being managed to this new sensibility, but slow and not from a logical strategy. A Law about Government Advertising and Communication has been promulgated and it assure the social and cultural diversity. Integration and acceptance are the objectives of the campaigns from the Government. This research show the data of a pioneer study in which the immigrants are the analyst (not the analyzed and show their feeling. This text describe the campaigns from the Government in which the immigrant appear

Quantifying Volcanic Emissions of Trace Elements to the Atmosphere: Ideas Based on Past Studies

Science.gov (United States)

Rose, W. I.

2003-12-01

Extensive data exist from volcanological and geochemical studies about exotic elemental enrichments in volcanic emissions to the atmosphere but quantitative data are quite rare. Advanced, highly sensitive techniques of analysis are needed to detect low concentrations of some minor elements, especially during major eruptions. I will present data from studies done during low levels of activity (incrustations and silica tube sublimates at high temperature fumaroles, from SEM studies of particle samples collected in volcanic plumes and volcanic clouds, from geochemical analysis of volcanic gas condensates, from analysis of treated particle and gas filter packs) and a much smaller number that could reflect explosive activity (from fresh ashfall leachate geochemistry, and from thermodynamic codes modeling volatile emissions from magma). This data describes a highly variable pattern of elemental enrichments which are difficult to quantify, generalize and understand. Sampling in a routine way is difficult, and work in active craters has heightened our awareness of danger, which appropriately inhibits some sampling. There are numerous localized enrichments of minor elements that can be documented and others can be expected or inferred. There is a lack of systematic tools to measure minor element abundances in volcanic emissions. The careful combination of several methodologies listed above for the same volcanic vents can provide redundant data on multiple elements which could lead to overall quantification of minor element fluxes but there are challenging issues about detection. For quiescent plumes we can design combinations of measurements to quantify minor element emission rates. Doing a comparable methodology to succeed in measuring minor element fluxes for significant eruptions will require new strategies and/or ideas.

UNIFIED MODELS OF ELEMENTS OF POWER SUPPLY SYSTEMS BASED ON EQUATIONS IN PHASE COORDINATES

Directory of Open Access Journals (Sweden)

Yu.N. Vepryk

2015-12-01

Full Text Available Purpose. The models of electrical machines in the phase coordinates, the universal algorithm for the simulation of separate elements in a d-q coordinates system and in a phase-coordinates system are proposed. Methodology. Computer methods of investigation of transients in electrical systems are based on a compilation of systems of differential equations and their numerical integration solution methods. To solve differential equations an implicit method of numerical integration was chosen. Because it provides to complete structural simulation possibility: firstly developing models of separate elements and then forming a model of the complex system. For the mathematical simulation of electromagnetic transients in the elements of the electrical systems has been accepted the implicit Euler-Cauchy method, because it provides a higher precision and stability of the computing processes. Results. In developing the model elements identified two groups of elements: - Static elements and electrical machines in the d-q coordinates; - Rotating electrical machines in phase coordinates. As an example, the paper provides a model of synchronous and asynchronous electric machines in the d-q coordinates system and the phase coordinate system. The generalization algorithm and the unified notation form of equations of elements of an electrical system are obtained. It provides the possibility of using structural methods to develop a mathematical model of power systems under transient conditions. Practical value. In addition, the using of a computer model allows to implement multivariant calculations for research and study of factors affecting the quantitative characteristics of the transients.

Study on the Accuracy Improvement of the Second-Kind Fredholm Integral Equations by Using the Buffa-Christiansen Functions with MLFMA

Directory of Open Access Journals (Sweden)

Yue-Qian Wu

2016-01-01

Full Text Available Former works show that the accuracy of the second-kind integral equations can be improved dramatically by using the rotated Buffa-Christiansen (BC functions as the testing functions, and sometimes their accuracy can be even better than the first-kind integral equations. When the rotated BC functions are used as the testing functions, the discretization error of the identity operators involved in the second-kind integral equations can be suppressed significantly. However, the sizes of spherical objects which were analyzed are relatively small. Numerical capability of the method of moments (MoM for solving integral equations with the rotated BC functions is severely limited. Hence, the performance of BC functions for accuracy improvement of electrically large objects is not studied. In this paper, the multilevel fast multipole algorithm (MLFMA is employed to accelerate iterative solution of the magnetic-field integral equation (MFIE. Then a series of numerical experiments are performed to study accuracy improvement of MFIE in perfect electric conductor (PEC cases with the rotated BC as testing functions. Numerical results show that the effect of accuracy improvement by using the rotated BC as the testing functions is greatly different with curvilinear or plane triangular elements but falls off when the size of the object is large.

Deficit in visual temporal integration in autism spectrum disorders.

Science.gov (United States)

Nakano, Tamami; Ota, Haruhisa; Kato, Nobumasa; Kitazawa, Shigeru

2010-04-07

Individuals with autism spectrum disorders (ASD) are superior in processing local features. Frith and Happe conceptualize this cognitive bias as 'weak central coherence', implying that a local enhancement derives from a weakness in integrating local elements into a coherent whole. The suggested deficit has been challenged, however, because individuals with ASD were not found to be inferior to normal controls in holistic perception. In these opposing studies, however, subjects were encouraged to ignore local features and attend to the whole. Therefore, no one has directly tested whether individuals with ASD are able to integrate local elements over time into a whole image. Here, we report a weakness of individuals with ASD in naming familiar objects moved behind a narrow slit, which was worsened by the absence of local salient features. The results indicate that individuals with ASD have a clear deficit in integrating local visual information over time into a global whole, providing direct evidence for the weak central coherence hypothesis.

Finite element formulation for fluid-structure interaction in three-dimensional space

International Nuclear Information System (INIS)

Kulak, R.F.

1979-01-01

A development is presented for a three-dimension hexahedral hydrodynamic finite-element. Using trilinear shape functions and assuming a constant pressure field in each element, simple relations were obtained for internal nodal forces. Because the formulation was based upon a rate approach it was applicable to problems involving large displacements. This element was incorporated into an existing plate-shell finite element code. Diagonal mass matrices were used and the resulting discrete equations of motion were solved using explicit temporal integrator. Results for several problems were presented which compare numerical predictions to closed form analytical solutions. In addition, the fluid-structure interaction problem of a fluid-filled, cylindrical vessel containing internal cylinders was studied. The internal cylinders were cantilever supported from the top cover of the vessel and were periodically located circumferentially at a fixed radius. A pressurized cylindrical cavity located at the bottom of the vessel at its centerline provided the loading

SCREEN FOR DOMINANT BEHAVIORAL MUTATIONS CAUSED BY GENOMIC INSERTION OF P-ELEMENT TRANSPOSONS IN DROSOPHILA: AN EXAMINATION OF THE INTEGRATION OF VIRAL VECTOR SEQUENCES

OpenAIRE

FOX, LYLE E.; GREEN, DAVID; YAN, ZIYING; ENGELHARDT, JOHN F.; WU, CHUN-FANG

2007-01-01

Here we report the development of a high-throughput screen to assess dominant mutation rates caused by P-element transposition within the Drosophila genome that is suitable for assessing the undesirable effects of integrating foreign regulatory sequences (viral cargo) into a host genome. Three different behavioral paradigms were used: sensitivity to mechanical stress, response to heat stress, and ability to fly. The results, from our screen of 35,000 flies, indicate that mutations caused by t...

Examination of the surface coatings removed from K-East Basin fuel elements

International Nuclear Information System (INIS)

Abrefah, J.; Marschman, S.C.; Jenson, E.D.

1998-05-01

This report provides the results of studies conducted on coatings discovered on the surfaces of some N-Reactor spent nuclear fuel (SNF) elements stored at the Hanford K-East Basin. These elements had been removed from the canisters and visually examined in-basin during FY 1996 as part of a series of characterization tests. The characterization tests are being performed to support the Integrated Process Strategy developed to package, dry, transport, and store the SNF in an interim storage facility on the Hanford site. Samples of coating materials were removed from K-East canister elements 2350E and 2540E, which had been sent, along with nine other elements, to the Postirradiation Testing Laboratory (327 Building) for further characterization following the in-basin examinations. These coating samples were evaluated by Pacific Northwest National Laboratory using various analytical methods. This report is part of the overall studies to determine the drying behavior of corrosion products associated with the K-Basin fuel elements. Altogether, five samples of coating materials were analyzed. These analyses suggest that hydration of the coating materials could be an additional source of moisture in the Multi-Canister Overpacks being used to contain the fuel for storage

Examination of the surface coating removed from K-East Basin fuel elements

Energy Technology Data Exchange (ETDEWEB)

Abrefah, J.; Marschman, S.C.; Jenson, E.D.

1998-05-01

This report provides the results of studies conducted on coatings discovered on the surfaces of some N-Reactor spent nuclear fuel (SNF) elements stored at the Hanford K-East Basin. These elements had been removed from the canisters and visually examined in-basin during FY 1996 as part of a series of characterization tests. The characterization tests are being performed to support the Integrated Process Strategy developed to package, dry, transport, and store the SNF in an interim storage facility on the Hanford site. Samples of coating materials were removed from K-East canister elements 2350E and 2540E, which had been sent, along with nine other elements, to the Postirradiation Testing Laboratory (327 Building) for further characterization following the in-basin examinations. These coating samples were evaluated by Pacific Northwest National Laboratory using various analytical methods. This report is part of the overall studies to determine the drying behavior of corrosion products associated with the K-Basin fuel elements. Altogether, five samples of coating materials were analyzed. These analyses suggest that hydration of the coating materials could be an additional source of moisture in the Multi-Canister Overpacks being used to contain the fuel for storage.

Finite element simulation and testing of ISW CFRP anchorage

DEFF Research Database (Denmark)

Schmidt, Jacob Wittrup; Goltermann, Per; Hertz, Kristian Dahl

2013-01-01

is modelled in the 3D finite Element program ABAQUS, just as digital image correlation (DIC) testing was performed to verify the finite element simulation. Also a new optimized design was produced to ensure that the finite element simulation and anchorage behaviour correlated well. It is seen....... This paper presents a novel mechanical integrated sleeve wedge anchorage which seem very promising when perusing the scope of ultimate utilization of CFRP 8mm rods (with a tension capacity of approximately 140kN). Compression transverse to the CFRP is evaluated to prevent premature failure. The anchorage...

Development of the Fuel Element Database of PUSPATI TRIGA Reactor

International Nuclear Information System (INIS)

Nurhayati Ramli; Naim Syauqi Hamzah; Nurfazila Husain; Yahya Ismail; Mat Zin Mat Husin; Mohd Fairus Abd Farid

2015-01-01

Since June 28th, 1982, the PUSPATI TRIGA Reactor (RTP) operates safely with an accumulated energy release of about 17,200 MWhr, which corresponds to about 882 g of uranium burn-up. The reactor core has been reconfigured 15th times. Presently, there are 111 TRIGA fuel elements in the core, which 66 of the fuel elements are from the initial criticality while the rest of the fuel elements have been added to compensate the uranium consumption. As 59 % of the fuel elements are older than 30 years old, it is necessary to put the history of every fuel element in a database for easy access of the fuel element movement, inspection results history and integrity status. This paper intends to describe how the fuel element database is developed and related formulae used in determining the RTP fuel element elongation. (author)

Penalized differential pathway analysis of integrative oncogenomics studies

NARCIS (Netherlands)

van Wieringen, W.N.; van de Wiel, M.A.

2014-01-01

Through integration of genomic data from multiple sources, we may obtain a more accurate and complete picture of the molecular mechanisms underlying tumorigenesis. We discuss the integration of DNA copy number and mRNA gene expression data from an observational integrative genomics study involving

Behavior of mixed-oxide fuel elements during an overpower transient

International Nuclear Information System (INIS)

Tsai, H.; Shikakura, S.

1993-01-01

A slow-ramp (0.1%/s), extended overpower (∼90%) transient test was conducted in EBR-II on 19 mixed-oxide fuel elements with conservative, moderate, and aggressive designs. Claddings for the elements were Type 316, D9, or PNC-316 stainless steel. Before the transient, the elements were preirradiated under steady-state or steady-state plus duty-cycle (periodic 15% overpower transient) conditions to burnups of 2.5-9.7 at%. Cladding integrity during the transient test was maintained by all fuel elements except one, which had experienced substantial overtemperature in the earlier stedy-state irradiation. Extensive centerline fuel melting occurred in all test elements. Significantly, this melting did not cause any elements to breach, although it did have a strong effect on the other aspects of fuel element behavior. (orig.)

Hot-Fire Test Results of an Oxygen/RP-2 Multi-Element Oxidizer-Rich Staged-Combustion Integrated Test Article

Science.gov (United States)

Hulka, J. R.; Protz, C. S.; Garcia, C. P.; Casiano, M. J.; Parton, J. A.

2016-01-01

As part of the Combustion Stability Tool Development project funded by the Air Force Space and Missile Systems Center, the NASA Marshall Space Flight Center was contracted to assemble and hot-fire test a multi-element integrated test article demonstrating combustion characteristics of an oxygen/hydrocarbon propellant oxidizer-rich staged-combustion engine thrust chamber. Such a test article simulates flow through the main injectors of oxygen/kerosene oxidizer-rich staged combustion engines such as the Russian RD-180 or NK-33 engines, or future U.S.-built engine systems such as the Aerojet-Rocketdyne AR-1 engine or the Hydrocarbon Boost program demonstration engine. For the thrust chamber assembly of the test article, several configurations of new main injectors, using relatively conventional gas-centered swirl coaxial injector elements, were designed and fabricated. The design and fabrication of these main injectors are described in a companion paper at this JANNAF meeting. New ablative combustion chambers were fabricated based on hardware previously used at NASA for testing at similar size and pressure. An existing oxygen/RP-1 oxidizer-rich subscale preburner injector from a previous NASA-funded program, along with existing and new inter-connecting hot gas duct hardware, were used to supply the oxidizer-rich combustion products to the oxidizer circuit of the main injector of the thrust chamber. Results from independent hot-fire tests of the preburner injector in a combustion chamber with a sonic throat are described in companion papers at this JANNAF conference. The resulting integrated test article - which includes the preburner, inter-connecting hot gas duct, main injector, and ablative combustion chamber - was assembled at Test Stand 116 at the East Test Area of the NASA Marshall Space Flight Center. The test article was well instrumented with static and dynamic pressure, temperature, and acceleration sensors to allow the collected data to be used for

A program for performing angular integrations for transition operators

International Nuclear Information System (INIS)

Froese Fischer, C.; Godefroid, M.R.; Hibbert, A.

1991-01-01

The MCHF-MLTPOL program performs the angular integrations necessary for expressing the matrix elements of transition operators, E1, E2, ..., or M1, M2, ..., as linear combinations of radial integrals. All matrix elements for transitions between two lists of configuration states will be evaluated. A limited amount of non-orthogonality is allowed between orbitals of the initial and final state. (orig.)

Experimental measurements and integrated modelling studies of actinide sorption onto cement

International Nuclear Information System (INIS)

Sugiyama, Daisuke; Fujita, Tomonari; Baston, G.M.N.

2003-01-01

An Integrated Cement Sorption Model (ICSM) for actinides onto Ordinary Portland Cement (OPC) is developed. The experimental measurements using the batch sorption technique for actinides onto cement and constituent minerals, which were considered in the modelling calculations, are also described. The actinide elements studied (thorium, uranium, neptunium, plutonium and americium) were strongly sorbed onto OPC. An initial comparison of the experimental data relating the sorption values of actinides onto cement-component phases with those onto OPC is carried out. The results suggest that the Calcium Silicate Hydrate (C-S-H) phases were found to be the most likely candidates to be the dominant-sorbing phases in order to describe the sorption of a actinides onto OPC. An approach to develop the integrated cement sorption model, based on a thermodynamic surface complexation model, is described with discussions on the possible mineralogy and phase distribution of OPC. Another approach than sorption, assuming that co-precipitation on the surface of the cement phase dominates 'sorption', is proposed and discussed. A scoring system is introduced to assess the applicability of the proposed ICSMs. It is suggested that the thermodynamic sorption model is recommended for the sorption of ionic species and the surface co-precipitation model is recommended for the sorption of neutral species though the sorption model is still recommended to be used to model OPC-based systems. (author)

Thermal-hydraulic study of integrated steam generator in PWR

International Nuclear Information System (INIS)

Osakabe, Masahiro

1989-01-01

One of the safety aspects of innovative reactor concepts is the integration of steam generators (SGs) into the reactor vessel in the case of the pressurized water reactor (PWR). All of the reactor system components including the pressurizer are within the reactor vessel in the SG integrated PWR. The simple heat transfer code was developed for the parametric study of the integrated SG. The code was compared to the once-through 19-tube SG experiment and the good agreement between the experimental results and the code predictions was obtained. The assessed code was used for the parametric study of the integrated once-through 16 m-straight-tube SG installed in the annular downcomer. The proposed integrated SG as a first attempt has approximately the same tube size and pitch as the present PWR and the SG primary and secondary sides in the present PWR is inverted in the integrated PWR. Based on the study, the reactor vessel size of the SG integrated PWR was calculated. (author)

Experimental Study of the Partitioning of Siderophile Elements in a Crystallizing Lunar Magma Ocean

Science.gov (United States)

Galenas, M.; Righter, K.; Danielson, L.; Pando, K.; Walker, R. J.

2012-01-01

The distributions of trace elements between the lunar interior and pristine crustal rocks were controlled by the composition of starting materials, lunar core formation, and crystallization of the lunar magma ocean (LMO) [1]. This study focuses on the partitioning of highly siderophile elements (HSE) including Re, Os, Ir, Ru, Pt, Rh, Pd and Au as well as the moderately siderophile elements Mo and W, and the lithophile elements of Hf and Sr. Our experiments also include Ga, which can be slightly siderophile, but is mostly considered to be chalcophile. Partitioning of these elements is not well known at the conditions of a crystallizing LMO. Previous studies of HSE partitioning in silicate systems have yielded highly variable results for differing oxygen fugacity (fO2) and pressure [2-4]. For example, under certain conditions Pt is compatible in clinopy-roxene [2] and Rh and Ru are compatible in olivine [3]. The silicate compositions used for these experiments were nominally basaltic. Ruthenium, Rh, and Pd are incompatible in plagioclase under these conditions[4]. However, this latter study was done at extremely oxidizing conditions and at atmospheric pressure, possibly limiting the applicability for consideration of conditions of a crystallizing LMO. In this study we address the effects of pressure and oxygen fugacity on the crystal/liquid partition coefficients of these trace elements. We are especially interested in the plagioclase/melt partition coefficients so that it may be possible to use reverse modeling to constrain the concentrations of these elements in the lunar mantle through their abundances in pristine crustal rocks.

[Integrity].

Science.gov (United States)

Gómez Rodríguez, Rafael Ángel

2014-01-01

To say that someone possesses integrity is to claim that that person is almost predictable about responses to specific situations, that he or she can prudentially judge and to act correctly. There is a closed interrelationship between integrity and autonomy, and the autonomy rests on the deeper moral claim of all humans to integrity of the person. Integrity has two senses of significance for medical ethic: one sense refers to the integrity of the person in the bodily, psychosocial and intellectual elements; and in the second sense, the integrity is the virtue. Another facet of integrity of the person is la integrity of values we cherish and espouse. The physician must be a person of integrity if the integrity of the patient is to be safeguarded. The autonomy has reduced the violations in the past, but the character and virtues of the physician are the ultimate safeguard of autonomy of patient. A field very important in medicine is the scientific research. It is the character of the investigator that determines the moral quality of research. The problem arises when legitimate self-interests are replaced by selfish, particularly when human subjects are involved. The final safeguard of moral quality of research is the character and conscience of the investigator. Teaching must be relevant in the scientific field, but the most effective way to teach virtue ethics is through the example of the a respected scientist.

The state-of-the-art and problems of fuel element structural analysis

International Nuclear Information System (INIS)

Lassmann, K.

1980-02-01

This study of fuel element structural analysis is arranged in two parts: In the first, self-contained, part the general basic principles of deterministic computer programs for structural analysis of fuel elements are reviewed critically and an approach is shown which can be used to expand the system with respect to statistical investigations. The second part contains technical details summarized in 11 publications, all of which appeared in periodicals with reviewer teams. The major aspects of this study are thought to be the following ones: Contributions to the 'philosophy' of fuel element structural analysis. Critical analysis of the basic structure of computer programs. Critical analysis of the mechanical concept of integral fuel rod computer programs. Establishment of a comprehensive computer program system (URANUS). Expansion from purely deterministic information by statistical analyses. Methodological and computer program developments for the analysis of fast accidents. (orig.) 891 HP/orig. 892 MKO [de

A Study of the Renewal Cycle of Hotel Building Elements in Malaysia

Directory of Open Access Journals (Sweden)

Zhen Wei

2014-01-01

Full Text Available Penang is the main tourism island which appeals an increasing number of travellers each year. Therefore, the hotels in Penang play a crucial role in the field of Penang tourism. However, recently some problems with the Penang hotels have been brought to light frequently by travellers including domestic and foreign tourists. The reason for this may be due to irregular maintenance as well as the fact that the renewal of the building elements may not have been duly carried out. In light of that, this research investigated the condition of the maintenance and renewal cycle of the building elements of the hotels in Penang. This study was conducted with a quantitative method, using a questionnaire to collect information regarding the condition of maintenance, evaluation of the condition of the building elements and the frequency of building elements renewal. The results revealed that each building element renewal cycle is differing according to the effects of maintenance and its lifespan. In terms of comparison with the renewals in Singapore hotels, there are shortcomings involved in the schedule of element renewals carried out in Penang.

Proportional-integral controller based small-signal analysis of hybrid distributed generation systems

International Nuclear Information System (INIS)

Ray, Prakash K.; Mohanty, Soumya R.; Kishor, Nand

2011-01-01

Research highlights: → We aim to minimize the deviation of frequency in an integrated energy resources like offshore wind, photovoltaic (PV), fuel cell (FC) and diesel engine generator (DEG) along with the energy storage elements like flywheel energy storage system (FESS) and battery energy storage system (BESS). → Further ultracapacitor (UC) as an alternative energy storage element and proportional-integral (PI) controller is addressed in order to achieve improvements in the deviation of frequency profiles. → A comparative assessment of frequency deviation for different hybrid systems is also carried out in the presence of high voltage direct current (HVDC) link and high voltage alternating current (HVAC) line. → In the study both qualitative and quantitative analysis reflects the improvements in frequency deviation profiles with use of ultracapacitor (UC) as energy storage element. -- Abstract: The large band variation in the wind speed and unpredictable solar radiation causes remarkable fluctuations of output power in offshore wind and photovoltaic system respectively, which leads to large deviation in the system frequency. In this context, to minimize the deviation in frequency, this paper presents integration of different energy resources like offshore wind, photovoltaic (PV), fuel cell (FC) and diesel engine generator (DEG) along with the energy storage elements like flywheel energy storage system (FESS) and battery energy storage system (BESS). Further ultracapacitor (UC) as an alternative energy storage element and proportional-integral (PI) controller is addressed in order to achieve improvements in the deviation of frequency profiles. A comparative assessment of frequency deviation for different hybrid systems is also carried out in the presence of high-voltage direct current (HVDC) link and high-voltage alternating current (HVAC) line. Frequency deviation for different isolated hybrid systems are presented graphically as well as in terms of

New mixed finite-element methods

International Nuclear Information System (INIS)

Franca, L.P.

1987-01-01

New finite-element methods are proposed for mixed variational formulations. The methods are constructed by adding to the classical Galerkin method various least-squares like terms. The additional terms involve integrals over element interiors, and include mesh-parameter dependent coefficients. The methods are designed to enhance stability. Consistency is achieved in the sense that exact solutions identically satisfy the variational equations.Applied to several problems, simple finite-element interpolations are rendered convergent, including convenient equal-order interpolations generally unstable within the Galerkin approach. The methods are subdivided into two classes according to the manner in which stability is attained: (1) circumventing Babuska-Brezzi condition methods; (2) satisfying Babuska-Brezzi condition methods. Convergence is established for each class of methods. Applications of the first class of methods to Stokes flow and compressible linear elasticity are presented. The second class of methods is applied to the Poisson, Timoshenko beam and incompressible elasticity problems. Numerical results demonstrate the good stability and accuracy of the methods, and confirm the error estimates

Theoretical study of fuel element reliability in the BRIG-300 fast reactor

International Nuclear Information System (INIS)

Kulikov, I.S.; Nesterenko, V.B.; Tverkovkin, B.E.

1983-01-01

The theoretical results on studies of the reliability of cermet symmetrically heated fuel elements under conditions of the BRIG-300 fast gas cooled reactor are presented. The investigations have been conducted at the Nuclear Power Engineering Institute of the Byelorussian Academy of Sciences. Two variants of the fuel elements are considered :the fuel element with the gas gap between fuel and can and the fuel element with tight contact between cermet fuel and can. The estimated data on can resistance, swelling of the fuel rods and cans, strains and stresses in cans, change of the gap and its thermal coductivity during the reactor operation are obtained. The results of the analysis show that cermet fuel has sufficient reliability upon oparational conditions of the reactor with dissociating gas coolant in a steady-state regime

Finite element model for heat conduction in jointed rock masses

International Nuclear Information System (INIS)

Gartling, D.K.; Thomas, R.K.

1981-01-01

A computatonal procedure for simulating heat conduction in a fractured rock mass is proposed and illustrated in the present paper. The method makes use of a simple local model for conduction in the vicinity of a single open fracture. The distributions of fractures and fracture properties within the finite element model are based on a statistical representation of geologic field data. Fracture behavior is included in the finite element computation by locating local, discrete fractures at the element integration points

The Integrated Complex of Marketing of Higher Education Services

Directory of Open Access Journals (Sweden)

Zhehus Olena V.

2017-10-01

Full Text Available The article, on the basis of generalization of scientific views of foreign and domestic scientists, substantiates the integrated model of marketing of higher education products and services with consideration of their specificities. The obtained result is the «5Р + S» model, which includes the newly introduced poli-element «proposition», combining the interrelated and indivisible elements of «product», «people» and «process», as well as the traditional elements of the service marketing complex: «price», «place», «promotion», «physical evidence». The «social-marketing» element has been added to the integrated model on the basis of the high societal importance of educational services. Altogether, the proposed integrated model of the complex of marketing of higher education products and services is a symbiosis of commercial and non-commercial marketing, which will enhance social and economic efficiency of functioning of higher educational institution.

Noncoding Elements: Evolution and Epigenetic Regulation

KAUST Repository

Seridi, Loqmane

2016-03-09

When the human genome project was completed, it revealed a surprising result. 98% of the genome did not code for protein of which more than 50% are repeats— later known as ”Junk DNA”. However, comparative genomics unveiled that many noncoding elements are evolutionarily constrained; thus luckily to have a role in genome stability and regulation. Though, their exact functions remained largely unknown. Several large international consortia such as the Functional Annotation of Mammalian Genomes (FANTOM) and the Encyclopedia of DNA Elements (ENCODE) were set to understand the structure and the regulation of the genome. Specifically, these endeavors aim to measure and reveal the transcribed components and functional elements of the genome. One of the most the striking findings of these efforts is that most of the genome is transcribed, including non-conserved noncoding elements and repeat elements. Specifically, we investigated the evolution and epigenetic properties of noncoding elements. 1. We compared genomes of evolutionarily distant species and showed the ubiquity of constrained noncoding elements in metazoa. 2. By integrating multi-omic data (such as transcriptome, nucleosome profiling, histone modifications), I conducted a comprehensive analysis of epigenetic properties (chromatin states) of conserved noncoding elements in insects. We showed that those elements have distinct and protective sequence features, undergo dynamic epigenetic regulation, and appear to be associated with the structural components of the chromatin, replication origins, and nuclear matrix. 3. I focused on the relationship between enhancers and repetitive elements. Using Cap Analysis of Gene Expression (CAGE) and RNASeq, I compiled a full catalog of active enhancers (a class of noncoding elements) during myogenesis of human primary cells of healthy donors and donors affected by Duchenne muscular dystrophy (DMD). Comparing the two time-courses, a significant change in the epigenetic

Separation by sequential chromatography of americium, plutonium and neptunium elements: application to the study of trans-uranian elements migration in a European lacustrine system

International Nuclear Information System (INIS)

Michel, H.

1999-01-01

The nuclear tests carried out in the atmosphere in the Sixties, the accidents and in particular that to the power station of Chernobyl in 1986, were at the origin of the dispersion of a significant quantity of transuranic elements and fission products. The study of a lake system, such that of the Blelham Tarn in Great Britain, presented in this memory, can bring interesting answers to the problems of management of the environment. The determination of the radionuclides in sediment cores made it possible not only to establish the history of the depositions and consequently the origin of the radionuclides, but also to evaluate the various transfers which took place according to the parameters of the site and the properties of the elements. The studied transuranic elements are plutonium 238, 239-240, americium 241 and neptunium 237. Alpha emitting radionuclides, their determination requires complex radiochemical separations. A method was worked out to successively separate the three radioelements by using a same chromatographic column. Cesium 137 is the studied fission product, its determination is done by direct Gamma spectrometry. Lead 210, natural radionuclide, whose atmospheric flow can be supposed constant. makes it possible to obtain a chronology of the various events. The detailed vertical study of sediment cores showed that the accumulation mode of the studied elements is the same one and that the methods of dating converge. The cesium, more mobile than transuranic elements in the atmosphere, was detected in the 1963 and 1986 fallout whereas an activity out of transuranic elements appears only for the 1963 fallout. The activity of the 1963 cesium fallout is of the same order of magnitude as that of 1986. The calculation of the diffusion coefficients of the elements in the sediments shows an increased migration of cesium compared to transuranic elements. An inventory on the whole of the lake made it possible to note that the atmospheric fallout constitute the

Critical elements in defining work-based identity in a post-apartheid South Africa

Directory of Open Access Journals (Sweden)

Sandra Lloyd

2011-08-01

Research purpose: The aim of the specific research questions was to determine which life sphere and life role elements, and which work-based identity facets were significant in forming work-based identity. Motivation for the study: The findings of the study will enable the formulation of an integrative definition of work-based identity applicable to the South African context. Research design, approach and method: Qualitative data was collected by means of unstructured interviews with 29 employees representing a range of job titles, levels and demographics in a large South African manufacturing company. A grounded theory approach (open and axial coding was used to analyse the data. Main findings: Distinctive individual self-definitions and a number of common themes integrating social and personal identity perspectives emerged from the data. These themes provided a sound basis for the proposed integrative model to define work-based identity. Practical/managerial implications: The findings of this research will assist human resource practitioners to develop training interventions and management strategies for the potential enhancement of work-based identities. This will result in a more engaged and harmonised workforce. Contribution/value-add: This was the first study of its kind to identify and delineate significant work-based identity elements for the formation of a work-based identity within a South African work context.

XRF Studies of Trace Elements and Essential hypertension

International Nuclear Information System (INIS)

Chaudhri, M.A.; Paul, U.; Chaudhri, M.N.

2011-01-01

The elemental concentrations in the blood of fully mature spontaneously hypertensive rats [SHR] were compared with that of normotensive Wistar Kyoto rats [WKy] with an energy- dispersive XRF-system using a Rhodium X-ray tube. A number of elements, Na, Mg, P, Cl, S, K, Ca, Fe, Cu, Zn, Rb and Br, ranging in concentrations from a few ppm to around 1 % were measured in all the blood samples. It has been observed that the concentrations of elements Na, Cu, Zn and Br in whole blood of SHR are about 5%, 17%, 7% and 21% higher respectively than in the WKy- group

Social marketing-based communications to integrate and support the HEALTHY study intervention

Science.gov (United States)

DeBar, LL; Schneider, M; Ford, EG; Hernandez, AE; Showell, B; Drews, KL; Moe, EL; Gillis, B; Jessup, AN; Stadler, DD; White, M

2009-01-01

The HEALTHY study was a randomized, controlled, multicenter, middle school-based, multifaceted intervention designed to reduce risk factors for the development of type 2 diabetes. The study randomized 42 middle schools to intervention or control, and followed students from the sixth to the eighth grades. Participants were a racially, ethnically and geographically diverse cohort from across the United States. Here, we describe the conceptual underpinnings and design of the social marketing-based communications component of the HEALTHY study intervention that combined changes in the school nutrition and physical education (PE) environment with behavior change initiatives. The communications intervention component coordinated multiple elements to deliver campaigns that served to integrate and support all aspects of the HEALTHY intervention. The campaigns unfolded across five semesters of middle school, each targeting a specific theme related to the HEALTHY objectives. Communications campaigns comprised (1) core elements such as branding, posters, banners and visual and verbal messaging, (2) student events supporting the nutrition, PE and behavior intervention components through the application of social marketing and communications strategies, including the incorporation of student-generated media and (3) distribution of premiums and theme enhancers to extend the visibility of the study beyond the intervention environment. Formative research conducted with students, parents and school administrators was used to refine the communications strategy. Student peer communicators selected from the student body were involved to influence the normative student environment. Marketing and creative design experts developed a brand, logo, activities and materials. In the latter half of the study, student-generated messages and media were used to reflect local interests and culture and enhance peer influence. The HEALTHY intervention delivery and impact were strengthened by the

Social marketing-based communications to integrate and support the HEALTHY study intervention.

Science.gov (United States)

DeBar, L L; Schneider, M; Ford, E G; Hernandez, A E; Showell, B; Drews, K L; Moe, E L; Gillis, B; Jessup, A N; Stadler, D D; White, M

2009-08-01

The HEALTHY study was a randomized, controlled, multicenter, middle school-based, multifaceted intervention designed to reduce risk factors for the development of type 2 diabetes. The study randomized 42 middle schools to intervention or control, and followed students from the sixth to the eighth grades. Participants were a racially, ethnically and geographically diverse cohort from across the United States. Here, we describe the conceptual underpinnings and design of the social marketing-based communications component of the HEALTHY study intervention that combined changes in the school nutrition and physical education (PE) environment with behavior change initiatives. The communications intervention component coordinated multiple elements to deliver campaigns that served to integrate and support all aspects of the HEALTHY intervention. The campaigns unfolded across five semesters of middle school, each targeting a specific theme related to the HEALTHY objectives. Communications campaigns comprised (1) core elements such as branding, posters, banners and visual and verbal messaging, (2) student events supporting the nutrition, PE and behavior intervention components through the application of social marketing and communications strategies, including the incorporation of student-generated media and (3) distribution of premiums and theme enhancers to extend the visibility of the study beyond the intervention environment. Formative research conducted with students, parents and school administrators was used to refine the communications strategy. Student peer communicators selected from the student body were involved to influence the normative student environment. Marketing and creative design experts developed a brand, logo, activities and materials. In the latter half of the study, student-generated messages and media were used to reflect local interests and culture and enhance peer influence. The HEALTHY intervention delivery and impact were strengthened by the

Performance of an anisotropic Allman/DKT 3-node thin triangular flat shell element

Science.gov (United States)

Ertas, A.; Krafcik, J. T.; Ekwaro-Osire, S.

1992-05-01

A simple, explicit formulation of the stiffness matrix for an anisotropic, 3-node, thin triangular flat shell element in global coordinates is presented. An Allman triangle (AT) is used for membrane stiffness. The membrane stiffness matrix is explicitly derived by applying an Allman transformation to a Felippa 6-node linear strain triangle (LST). Bending stiffness is incorporated by the use of a discrete Kirchhoff triangle (DKT) bending element. Stiffness terms resulting from anisotropic membrane-bending coupling are included by integrating, in area coordinates, the membrane and bending strain-displacement matrices. Using the aforementioned approach, the objective of this study is to develop and test the performance of a practical 3-node flat shell element that could be used in plate problems with unsymmetrically stacked composite laminates. The performance of the latter element is tested on plates of varying aspect ratios. The developed 3-node shell element should simplify the programming task and have the potential of reducing the computational time.

Identification of functional elements and regulatory circuits by Drosophila modENCODE.

Science.gov (United States)

Roy, Sushmita; Ernst, Jason; Kharchenko, Peter V; Kheradpour, Pouya; Negre, Nicolas; Eaton, Matthew L; Landolin, Jane M; Bristow, Christopher A; Ma, Lijia; Lin, Michael F; Washietl, Stefan; Arshinoff, Bradley I; Ay, Ferhat; Meyer, Patrick E; Robine, Nicolas; Washington, Nicole L; Di Stefano, Luisa; Berezikov, Eugene; Brown, Christopher D; Candeias, Rogerio; Carlson, Joseph W; Carr, Adrian; Jungreis, Irwin; Marbach, Daniel; Sealfon, Rachel; Tolstorukov, Michael Y; Will, Sebastian; Alekseyenko, Artyom A; Artieri, Carlo; Booth, Benjamin W; Brooks, Angela N; Dai, Qi; Davis, Carrie A; Duff, Michael O; Feng, Xin; Gorchakov, Andrey A; Gu, Tingting; Henikoff, Jorja G; Kapranov, Philipp; Li, Renhua; MacAlpine, Heather K; Malone, John; Minoda, Aki; Nordman, Jared; Okamura, Katsutomo; Perry, Marc; Powell, Sara K; Riddle, Nicole C; Sakai, Akiko; Samsonova, Anastasia; Sandler, Jeremy E; Schwartz, Yuri B; Sher, Noa; Spokony, Rebecca; Sturgill, David; van Baren, Marijke; Wan, Kenneth H; Yang, Li; Yu, Charles; Feingold, Elise; Good, Peter; Guyer, Mark; Lowdon, Rebecca; Ahmad, Kami; Andrews, Justen; Berger, Bonnie; Brenner, Steven E; Brent, Michael R; Cherbas, Lucy; Elgin, Sarah C R; Gingeras, Thomas R; Grossman, Robert; Hoskins, Roger A; Kaufman, Thomas C; Kent, William; Kuroda, Mitzi I; Orr-Weaver, Terry; Perrimon, Norbert; Pirrotta, Vincenzo; Posakony, James W; Ren, Bing; Russell, Steven; Cherbas, Peter; Graveley, Brenton R; Lewis, Suzanna; Micklem, Gos; Oliver, Brian; Park, Peter J; Celniker, Susan E; Henikoff, Steven; Karpen, Gary H; Lai, Eric C; MacAlpine, David M; Stein, Lincoln D; White, Kevin P; Kellis, Manolis

2010-12-24

To gain insight into how genomic information is translated into cellular and developmental programs, the Drosophila model organism Encyclopedia of DNA Elements (modENCODE) project is comprehensively mapping transcripts, histone modifications, chromosomal proteins, transcription factors, replication proteins and intermediates, and nucleosome properties across a developmental time course and in multiple cell lines. We have generated more than 700 data sets and discovered protein-coding, noncoding, RNA regulatory, replication, and chromatin elements, more than tripling the annotated portion of the Drosophila genome. Correlated activity patterns of these elements reveal a functional regulatory network, which predicts putative new functions for genes, reveals stage- and tissue-specific regulators, and enables gene-expression prediction. Our results provide a foundation for directed experimental and computational studies in Drosophila and related species and also a model for systematic data integration toward comprehensive genomic and functional annotation.

A Gauss-Kronrod-Trapezoidal integration scheme for modeling biological tissues with continuous fiber distributions.

Science.gov (United States)

Hou, Chieh; Ateshian, Gerard A

2016-01-01

Fibrous biological tissues may be modeled using a continuous fiber distribution (CFD) to capture tension-compression nonlinearity, anisotropic fiber distributions, and load-induced anisotropy. The CFD framework requires spherical integration of weighted individual fiber responses, with fibers contributing to the stress response only when they are in tension. The common method for performing this integration employs the discretization of the unit sphere into a polyhedron with nearly uniform triangular faces (finite element integration or FEI scheme). Although FEI has proven to be more accurate and efficient than integration using spherical coordinates, it presents three major drawbacks: First, the number of elements on the unit sphere needed to achieve satisfactory accuracy becomes a significant computational cost in a finite element (FE) analysis. Second, fibers may not be in tension in some regions on the unit sphere, where the integration becomes a waste. Third, if tensed fiber bundles span a small region compared to the area of the elements on the sphere, a significant discretization error arises. This study presents an integration scheme specialized to the CFD framework, which significantly mitigates the first drawback of the FEI scheme, while eliminating the second and third completely. Here, integration is performed only over the regions of the unit sphere where fibers are in tension. Gauss-Kronrod quadrature is used across latitudes and the trapezoidal scheme across longitudes. Over a wide range of strain states, fiber material properties, and fiber angular distributions, results demonstrate that this new scheme always outperforms FEI, sometimes by orders of magnitude in the number of computational steps and relative accuracy of the stress calculation.

Steam generator tube rupture simulation using extended finite element method

Energy Technology Data Exchange (ETDEWEB)

Mohanty, Subhasish, E-mail: smohanty@anl.gov; Majumdar, Saurin; Natesan, Ken

2016-08-15

Highlights: • Extended finite element method used for modeling the steam generator tube rupture. • Crack propagation is modeled in an arbitrary solution dependent path. • The FE model is used for estimating the rupture pressure of steam generator tubes. • Crack coalescence modeling is also demonstrated. • The method can be used for crack modeling of tubes under severe accident condition. - Abstract: A steam generator (SG) is an important component of any pressurized water reactor. Steam generator tubes represent a primary pressure boundary whose integrity is vital to the safe operation of the reactor. SG tubes may rupture due to propagation of a crack created by mechanisms such as stress corrosion cracking, fatigue, etc. It is thus important to estimate the rupture pressures of cracked tubes for structural integrity evaluation of SGs. The objective of the present paper is to demonstrate the use of extended finite element method capability of commercially available ABAQUS software, to model SG tubes with preexisting flaws and to estimate their rupture pressures. For the purpose, elastic–plastic finite element models were developed for different SG tubes made from Alloy 600 material. The simulation results were compared with experimental results available from the steam generator tube integrity program (SGTIP) sponsored by the United States Nuclear Regulatory Commission (NRC) and conducted at Argonne National Laboratory (ANL). A reasonable correlation was found between extended finite element model results and experimental results.

Steam generator tube rupture simulation using extended finite element method

International Nuclear Information System (INIS)

Mohanty, Subhasish; Majumdar, Saurin; Natesan, Ken

2016-01-01

Highlights: • Extended finite element method used for modeling the steam generator tube rupture. • Crack propagation is modeled in an arbitrary solution dependent path. • The FE model is used for estimating the rupture pressure of steam generator tubes. • Crack coalescence modeling is also demonstrated. • The method can be used for crack modeling of tubes under severe accident condition. - Abstract: A steam generator (SG) is an important component of any pressurized water reactor. Steam generator tubes represent a primary pressure boundary whose integrity is vital to the safe operation of the reactor. SG tubes may rupture due to propagation of a crack created by mechanisms such as stress corrosion cracking, fatigue, etc. It is thus important to estimate the rupture pressures of cracked tubes for structural integrity evaluation of SGs. The objective of the present paper is to demonstrate the use of extended finite element method capability of commercially available ABAQUS software, to model SG tubes with preexisting flaws and to estimate their rupture pressures. For the purpose, elastic–plastic finite element models were developed for different SG tubes made from Alloy 600 material. The simulation results were compared with experimental results available from the steam generator tube integrity program (SGTIP) sponsored by the United States Nuclear Regulatory Commission (NRC) and conducted at Argonne National Laboratory (ANL). A reasonable correlation was found between extended finite element model results and experimental results.

ANSYS mechanical APDL for finite element analysis

CERN Document Server

Thompson, Mary Kathryn

2017-01-01

ANSYS Mechanical APDL for Finite Element Analysis provides a hands-on introduction to engineering analysis using one of the most powerful commercial general purposes finite element programs on the market. Students will find a practical and integrated approach that combines finite element theory with best practices for developing, verifying, validating and interpreting the results of finite element models, while engineering professionals will appreciate the deep insight presented on the program's structure and behavior. Additional topics covered include an introduction to commands, input files, batch processing, and other advanced features in ANSYS. The book is written in a lecture/lab style, and each topic is supported by examples, exercises and suggestions for additional readings in the program documentation. Exercises gradually increase in difficulty and complexity, helping readers quickly gain confidence to independently use the program. This provides a solid foundation on which to build, preparing readers...

INTEGRATION OF GEODATA IN DOCUMENTING CASTLE RUINS

Directory of Open Access Journals (Sweden)

P. Delis

2016-06-01

Full Text Available Textured three dimensional models are currently the one of the standard methods of representing the results of photogrammetric works. A realistic 3D model combines the geometrical relations between the structure’s elements with realistic textures of each of its elements. Data used to create 3D models of structures can be derived from many different sources. The most commonly used tool for documentation purposes, is a digital camera and nowadays terrestrial laser scanning (TLS. Integration of data acquired from different sources allows modelling and visualization of 3D models historical structures. Additional aspect of data integration is possibility of complementing of missing points for example in point clouds. The paper shows the possibility of integrating data from terrestrial laser scanning with digital imagery and an analysis of the accuracy of the presented methods. The paper describes results obtained from raw data consisting of a point cloud measured using terrestrial laser scanning acquired from a Leica ScanStation2 and digital imagery taken using a Kodak DCS Pro 14N camera. The studied structure is the ruins of the Ilza castle in Poland.

Study of Piezoelectric Vibration Energy Harvester with non-linear conditioning circuit using an integrated model