Research on Psychotherapy Integration: Recommendations and Conclusions from an NIMH Workshop.

Science.gov (United States)

Wolfe, Barry E.; Goldfried, Marvin R.

1988-01-01

Describes National Institute of Mental Health (NIMH) workshop (March 1986) which invited 14 psychotherapy researchers to consider key issues associated with psychotherapy integration. Discusses recommendations developed to initiate a research program encompassing conceptual clarification, efficacy studies of systematic eclectic therapies, the role…

1. annual workshop proceedings of integrated project fundamental processes of radionuclide migration IP Funmig; Rapport du 1. workshop annuel du projet integre fundamental processes of radionuclide migration (IP Funmig)

Energy Technology Data Exchange (ETDEWEB)

Reiller, P [CEA Saclay, Dept. de Physico-Chimie (DPC), 91 - Gif sur Yvette (France); Buckau, G; Kienzler, B [Institut fur Nukleare Entsorgung (INE), Karlsruhe (Germany); Duro, L; Martell, M [Enviros (Spain)

2006-07-01

These are the proceedings of the 1. Annual Workshop Proceedings of the Integrated Project FUNMIG (fundamental processes of radionuclide migration). The Annual Workshop was hosted by CEA and held in Saclay, 28 November - 1 December 2005. The project started January 2005 and has a duration of four years. The project makes use of annual workshops bringing the project partners together and inviting external groups to participate and contribute. Consequently, the present proceedings will be followed by another three proceedings from the forthcoming annual workshops to be held the end of 2006, 2007 and 2008. The 2. Annual Workshop will be hosted by SKB and be held in Stockholm, 21-23 November 2006. The proceedings serve several purposes. The key purpose is to document and make available to a broad scientific community the outcome of this project. A considerable part of the project activity reporting is also done through the proceedings. For this reason the first parts of the proceedings are structured around the workshop and the project. A large part of the proceedings, however, also contain individual scientific contributions by the project partners as well as external contributors. Information about the project can be found under www.funmig.com. (authors)

Academic excellence workshops in chemistry and physics

Science.gov (United States)

Mills, Susan Rose

In the mid-1970's, Uri Treisman, at the University of California, Berkeley, developed an academic excellence workshop program that had important successes in increasing minority student achievement and persistence in calculus. The present dissertation research is an in-depth study of chemistry and physics workshops at the California State Polytechnic University, Pomona. Data for the first, longitudinal component of this study were obtained by tracking to Spring 1998 all workshop minority students, i.e., Latino, African American, and Native American workshop students, a random sample of non-workshop minority students, and a random sample of non-targeted students, i.e., Anglo and Asian students, enrolled in first-quarter General Chemistry or Physics during specific quarters of 1992 or 1993. Data for the second component were obtained by administering questionnaires, conducting interviews, and observing science students during Fall, 1996. Workshop participation was a significant predictor of first-quarter course grade for minority students in both chemistry and physics, while verbal and mathematics Scholastic Aptitude Test (SAT) scores were not significant predictors of beginning course grade for minority science students. The lack of predictive ability of the SAT and the importance of workshop participation in minority students' beginning science course performance are results with important implications for educators and students. In comparing pre-college achievement measures for workshop and non-targeted students, non-targeted students' mathematics SAT scores were significantly higher than chemistry and physics workshop students' scores. Nonetheless, workshop participation "leveled the field" as workshop and non-targeted students performed similarly in beginning science courses. Positive impacts of workshop participation on achievement, persistence, efficiency, social integration, and self-confidence support the continued and expanded funding of workshop programs

75 FR 20843 - Notice of Workshop To Discuss Policy-Relevant Science to Inform EPA's Integrated Plan for the...

Science.gov (United States)

2010-04-21

... Policy-Relevant Science to Inform EPA's Integrated Plan for the Review of the Lead National Ambient Air.... Environmental Protection Agency (EPA) is announcing that a workshop entitled, ``Workshop to Discuss Policy... workshop will be open to attendance by interested public observers on a first-come, first-served basis up...

Engineered Barrier System - Mechanical Integrity of KBS-3 Spent Fuel Canisters. Report from a Workshop. Synthesis and extended abstracts

Energy Technology Data Exchange (ETDEWEB)

2007-09-15

SKI is preparing to review the license applications being developed by the Swedish Nuclear Fuel and Waste Management Company (SKB) for a final repository for the geological disposal of spent nuclear fuel in the year 2009. As part of its preparation, SKI is conducting a series of technical workshops on key aspects of the Engineered Barrier System (EBS). The workshop reported here mainly dealt with the mechanical integrity of KBS-3 spent fuel canisters. This included assessment and review of various loading conditions, structural integrity models and mechanical properties of the copper shell and the cast iron insert. Degradation mechanisms such as stress corrosion cracking and brittle creep fracture were also briefly addressed. Previous workshops have addressed the overall concept for long-term integrity of the EBS, the manufacturing, testing and QA of the EBS, the performance confirmation for the EBS, long-term stability of the buffer and the backfill, corrosion properties of copper canisters and the spent fuel dissolution and source term modelling. The goal of ongoing review work in connection of the workshop series is to achieve a comprehensive overview of all aspects of SKB's EBS and spent fuel work prior to the handling of the forthcoming license application. This report aims to summarise the issues discussed at the workshop and to extract the essential viewpoints that have been expressed. The report is not a comprehensive record of all the discussions at the workshop, and individual statements made by workshop participants should be regarded as personal opinions rather than SKI viewpoints. Results from the EBS workshops series will be used as one important basis in future review work. This reports includes in addition to the workshop synthesis, questions to SKB identified prior to the workshop, and extended abstracts for introductory presentations

CEBAF/SURA 1985 Summer Workshop

International Nuclear Information System (INIS)

Crannel, H.

1985-12-01

The 1985 Summer Workshop began a new phase of planning for the experimental program at CEBAF. One goal of the Workshop was to define and describe options for equipping the CEBAF and stations with experimental equipment. Starting with an initial list of options which grew out of discussions during the Winter of 1984 and the Spring of 1985, the five working groups met during the Workshop and developed their final reports, included in these proceedings. The program of the Workshop consisted of invited talks on both theoretical and experimental topics, and working group meetings. The five working groups, include: Magnetic Spectrometers; Large Acceptance Detectors and Low Intensity Beams; Internal Targets; Positrons; Theory. These proceedings begin with an overview of CEBAF, and a report on progress made by the Magnetic Spectrometer and Internal Target Working Groups prior to the Workshop. The next part contains the invited talks, presented in the order which they were given during the week. The final reports of the five working groups follow this, and the proceedings conclude with papers contributed to the Workshop

Time-integrated radon measurements in spring and well waters by track technique

International Nuclear Information System (INIS)

Somogyi, G.

1986-01-01

The radon content dissolved in natural waters seems to be a very sensitive indicator of potential uranium deposits. We have developed different track methods to perform time-integrated, ''in-situ'' measurements of radon in different natural waters (spring, lake, well) and their neighbouring soil gas. One of our main purposes was to study the seasonal variation of radon content and its possible correlation with certain water (yield, flow rate) and environmental (depth, temperature) parameters. Simultaneous radon measurements have been carried out in lake and spring waters in a cave, in thermal and cold water springs of a public bath and in a deep drilled well. The radon profiles obtained in the deep well lend support to the idea that the environmental radon can travel large distances in microbubbles of a ''carrier geogas''. (author)

Lighting Assessment in Knitting Workshop in Yazd

Directory of Open Access Journals (Sweden)

A Barkhordari

2016-01-01

Full Text Available Introduction: The sense of sight is one of the most vital human senses and help the environment gets most of its information. Whatever one's job is more subtle, more work will be given brightness. Good lighting, increase work efficiency and general physiological effects on people's moods. The relationship between low and high frequency illumination accidents there Methods: This study was conducted in 10 workshops in Yazd home knitting. Due to maximize natural lighting measurements in June and November this year took place in cloudy days. Thus, in both seasons overall lighting, natural and artificial, were evaluated. That, in order to measure all the natural light, artificial light sources (lamps and the measurements were off by clarifying re-lamp, the overall lighting (natural and artificial were measured. In order to measure the general lighting provided by the Illuminating Engineering society and stop the pattern surfaces were used. The workshops with less than standard lighting conditions were identified and interventions to improve the brightness of the workshops were measured again. Results: Average, minimum and maximum overall brightness of spring workshops 4 and 6 respectively, with values of 67/278 and 53/452 is a luxury. Workshops values 5 and 2 47/184 and 43/218 minimum and maximum luxury in order to be daylight in spring. Conclusions: The majority of the studied weaving Workshops lighting was good, with measures such as proper installation and periodic cleaning and dust lamps, replacement lamps burned by use of fluorescent ambient lighting conditions can be improved.

Report on GeoData 2011 Workshop - Data Life Cycle, Integration and Citation

Science.gov (United States)

Signell, R.; Fox, P.

2012-04-01

The U.S. GeoData 2011 was inspired by a joint NSF-USGS identification of the need to hear from the broader 'geo' community on a variety of data related matters. While increasing attention needed to be paid to full life cycle of data, in the process of preparing and scoping the workshop two other hot issues were identified: integration and citation, giving the workshop three subject areas to delve into as well as to explore connections among them. Invited participants were drawn from all 'Geo' disciplines, and beyond, from information, computer and library science, from academia, agency and commercial organizations, and from student to senior faculty/ administrators. The workshop diversity provided a rich exchange of ideas, experiences and challenges for GeoData. Many key findings and recommendations have been extracted from the detail breakout discussions and syntheses during and after the workshop. Topical categories included: metadata, standards, standards-based tools, culture, collaboration and workforce. Key points that cut across all three-subject areas were: - A shift is needed within agencies to provide longer-term funding support, for communities to come together, remain coherent and to enable data stewardship, integration and citation within their communities and across to other communities (to the extent possible). - Agencies like USGS, NASA and NOAA must also play a key role in sustaining geoscience cyberinfrastructure by moving research advances into operations. - Community-wide standards and practices should build from demonstrated successes, be widely disseminated, and tools need to be developed to support them. - Education is critical to broader adoption. Marketing studies need to be conducted to provide the business case for full stewardship, integration and citation, and incentives are needed to encourage everyone to participate in making data integratable, citable, etc. While technology gaps are still evident across the three topic areas, there is

Time-integrated radon measurements in spring and well waters by track technique

Energy Technology Data Exchange (ETDEWEB)

Somogyi, G.; Lenart, L.

1986-01-01

The radon content dissolved in natural waters seems to be a very sensitive indicator of potential uranium deposits. We have developed different track methods to perform time-integrated, ''in-situ'' measurements of radon in different natural waters (spring, lake, well) and their neighbouring soil gas. One of our main purposes was to study the seasonal variation of radon content and its possible correlation with certain water (yield, flow rate) and environmental (depth, temperature) parameters. Simultaneous radon measurements have been carried out in lake and spring waters in a cave, in thermal and cold water springs of a public bath and in a deep drilled well. The radon profiles obtained in the deep well lend support to the idea that the environmental radon can travel large distances in microbubbles of a ''carrier geogas''.

Office of Academic Assessment provides workshops on the program assessment process

OpenAIRE

Williams, Meghan

2008-01-01

The Office of Academic Assessment is once again providing a series of workshops on the program assessment process during the spring semester. The workshops will offer a wide range of resources to assist faculty and administrators as they focus on teaching and learning in their programs.

Microcoil Spring Interconnects for Ceramic Grid Array Integrated Circuits

Science.gov (United States)

Strickland, S. M.; Hester, J. D.; Gowan, A. K.; Montgomery, R. K.; Geist, D. L.; Blanche, J. F.; McGuire, G. D.; Nash, T. S.

2011-01-01

As integrated circuit miniaturization trends continue, they drive the need for smaller higher input/output (I/O) packages. Hermetically sealed ceramic area array parts are the package of choice by the space community for high reliability space flight electronic hardware. Unfortunately, the coefficient of thermal expansion mismatch between the ceramic area array package and the epoxy glass printed wiring board limits the life of the interconnecting solder joint. This work presents the results of an investigation by Marshall Space Flight Center into a method to increase the life of this second level interconnection by the use of compliant microcoil springs. The design of the spring and its attachment process are presented along with thermal cycling results of microcoil springs (MCS) compared with state-of-the-art ball and column interconnections. Vibration testing has been conducted on MCS and high lead column parts. Radio frequency simulation and measurements have been made and the MCS has been modeled and a stress analysis performed. Thermal cycling and vibration testing have shown MCS interconnects to be significantly more reliable than solder columns. Also, MCS interconnects are less prone to handling damage than solder columns. Future work that includes shock testing, incorporation into a digital signal processor board, and process evaluation of expansion from a 400 I/O device to a device with over 1,100 I/O is identified.

1. annual workshop proceedings of integrated project fundamental processes of radionuclide migration IP Funmig

International Nuclear Information System (INIS)

Reiller, P.; Buckau, G.; Kienzler, B.; Duro, L.; Martell, M.

2006-01-01

These are the proceedings of the 1. Annual Workshop Proceedings of the Integrated Project FUNMIG (fundamental processes of radionuclide migration). The Annual Workshop was hosted by CEA and held in Saclay, 28 November - 1 December 2005. The project started January 2005 and has a duration of four years. The project makes use of annual workshops bringing the project partners together and inviting external groups to participate and contribute. Consequently, the present proceedings will be followed by another three proceedings from the forthcoming annual workshops to be held the end of 2006, 2007 and 2008. The 2. Annual Workshop will be hosted by SKB and be held in Stockholm, 21-23 November 2006. The proceedings serve several purposes. The key purpose is to document and make available to a broad scientific community the outcome of this project. A considerable part of the project activity reporting is also done through the proceedings. For this reason the first parts of the proceedings are structured around the workshop and the project. A large part of the proceedings, however, also contain individual scientific contributions by the project partners as well as external contributors. Information about the project can be found under www.funmig.com. (authors)

Evaluation of mechanical integrity for helical coil hold-down spring of PLUS7TM fuel

International Nuclear Information System (INIS)

Choi, Ki Sung; Kim, Yong Hwan; Kwon, Jung Tack; Kim, Kyu Tae

2004-01-01

Nuclear fuel assembly is subject to hydraulic forces generated by primary coolant flow during reactor operation. These forces may be sufficient to overcome the fuel assembly weight thereby allowing the fuel assembly to lift off of its support. To provide a positive hold-down margin against the upward coolant flow forces, helical coil springs or leaf springs are installed in the fuel assemblies. An advanced fuel for Korean Standard Nuclear Power Plants (KSNP), PLUS7 fuel has developed to get the thermal margin increase, failure free and high seismic resistance, etc. And the new designed helical coil hold-down spring was introduced into PLUS7 fuel assembly. The purpose of this paper is to evaluate the mechanical integrity for the helical coil hold-down spring of PLUS7 fuel assembly

75 FR 15485 - Pipeline Safety: Workshop on Guidelines for Integrity Assessment of Cased Pipe

Science.gov (United States)

2010-03-29

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration [Docket ID...: Pipeline and Hazardous Materials Safety Administration (PHMSA), DOT. ACTION: Notice of workshop. SUMMARY... ``Guidelines for Integrity Assessment of Cased Pipe in Gas Transmission Pipelines'' and related Frequently...

Proceedings of the joint Nordic spring meeting '92

International Nuclear Information System (INIS)

Lindgaard, P.-A.

1992-05-01

Proceedings in the form of extended abstracts of the Joint Nordic Spring Meeting '92 including the 3rd Nordic Conference on Surface Science, the 6th Nordic Symposium on Computer Simulation, and 3rd Nordic Symposium on Superconductivity. In addition there are contributions from workshops on the Physics of Small Cluster, on Soft Condensed Matter Physics and from an Electronic Properties Workshop. The proceedings constrain over 300 contributions on the mentioned subjects. Further, there are several contributions on general solid state subjects, magnetism, semiconductors etc. (au) (4 tabs., 187 ills., 931 refs.)

A healthy turn in urban climate change policies; European city workshop proposes health indicators as policy integrators.

Science.gov (United States)

Keune, Hans; Ludlow, David; van den Hazel, Peter; Randall, Scott; Bartonova, Alena

2012-06-28

The EU FP6 HENVINET project reviewed the potential relevance of a focus on climate change related health effects for climate change policies at the city region level. This was undertaken by means of a workshop with both scientists, city representatives from several EU-countries, representatives of EU city networks and EU-experts. In this paper we introduce some important health related climate change issues, and discuss the current city policies of the participating cities. The workshop used a backcasting format to analyse the future relevance of a health perspective, and the main benefits and challenges this would bring to urban policy making. It was concluded that health issues have an important function as indicators of success for urban climate change policies, given the extent to which climate change policies contribute to public health and as such to quality of life. Simultaneously the health perspective may function as a policy integrator in that it can combine several related policy objectives, such as environmental policies, health policies, urban planning and economic development policies, in one framework for action. Furthermore, the participants to the workshop considered public health to be of strategic importance in organizing public support for climate change policies. One important conclusion of the workshop was the view that the connection of science and policy at the city level is inadequate, and that the integration of scientific knowledge on climate change related health effects and local policy practice is in need of more attention. In conclusion, the workshop was viewed as a constructive advance in the process of integration which hopefully will lead to ongoing cooperation. The workshop had the ambition to bring together a diversity of actor perspectives for exchange of knowledge and experiences, and joint understanding as a basis for future cooperation. Next to the complementarities in experience and knowledge, the mutual critical reflection

The Green's matrix and the boundary integral equations for analysis of time-harmonic dynamics of elastic helical springs.

Science.gov (United States)

Sorokin, Sergey V

2011-03-01

Helical springs serve as vibration isolators in virtually any suspension system. Various exact and approximate methods may be employed to determine the eigenfrequencies of vibrations of these structural elements and their dynamic transfer functions. The method of boundary integral equations is a meaningful alternative to obtain exact solutions of problems of the time-harmonic dynamics of elastic springs in the framework of Bernoulli-Euler beam theory. In this paper, the derivations of the Green's matrix, of the Somigliana's identities, and of the boundary integral equations are presented. The vibrational power transmission in an infinitely long spring is analyzed by means of the Green's matrix. The eigenfrequencies and the dynamic transfer functions are found by solving the boundary integral equations. In the course of analysis, the essential features and advantages of the method of boundary integral equations are highlighted. The reported analytical results may be used to study the time-harmonic motion in any wave guide governed by a system of linear differential equations in a single spatial coordinate along its axis. © 2011 Acoustical Society of America

Minutes of the second IFMIF-CDA design integration workshop. Proceedings

Energy Technology Data Exchange (ETDEWEB)

Maekawa, Hiroshi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Konishi, Satoshi

1996-08-01

The second Design Integration Workshop of IFMIF-CDA was held on May 20-27, 1996 at JAERI/Tokai. The primary objectives were, (1) to review and update the Baseline Design Concept, (2) to review the preliminary schedule and cost estimates, and (3) to establish the R and D needs for the next phase of the activity. This report presents a brief summary of the objective and results of the meeting. Detailed information on the agenda, attendees, and presentation material is included in the Appendix. (author)

INDICO Workshop

CERN Multimedia

CERN. Geneva; Fabbrichesi, Marco

2004-01-01

The INtegrated DIgital COnferencing EU project has finished building a complete software solution to facilitate the MANAGEMENT OF CONFERENCES, workshops, schools or simple meetings from their announcement to their archival. Everybody involved in the organization of events is welcome to join this workshop, in order to understand the scope of the project and to see demonstrations of the various features.

The Third ATLAS ROD Workshop

CERN Multimedia

Poggioli, L.

A new-style Workshop After two successful ATLAS ROD Workshops dedicated to the ROD hardware and held at the Geneva University in 1998 and in 2000, a new style Workshop took place at LAPP in Annecy on November 14-15, 2002. This time the Workshop was fully dedicated to the ROD-TDAQ integration and software in view of the near future integration activities of the final RODs for the detector assembly and commissioning. More precisely, the aim of this workshop was to get from the sub-detectors the parameters needed for T-DAQ, as well as status and plans from ROD builders. On the other hand, what was decided and assumed had to be stated (like EB decisions and URDs), and also support plans. The Workshop gathered about 70 participants from all ATLAS sub-detectors and the T-DAQ community. The quite dense agenda allowed nevertheless for many lively discussions, and for a dinner in the old town of Annecy. The Sessions The Workshop was organized in five main sessions: Assumptions and recommendations Sub-de...

Integrated geophysical investigations of Main Barton Springs, Austin, Texas, USA

Science.gov (United States)

Saribudak, By Mustafa; Hauwert, Nico M.

2017-03-01

Barton Springs is a major discharge site for the Barton Springs Segment of the Edwards Aquifer and is located in Zilker Park, Austin, Texas. Barton Springs actually consists of at least four springs. The Main Barton Springs discharges into the Barton Springs pool from the Barton Springs fault and several outlets along a fault, from a cave, several fissures, and gravel-filled solution cavities on the floor of the pool west of the fault. Surface geophysical surveys [resistivity imaging, induced polarization (IP), self-potential (SP), seismic refraction, and ground penetrating radar (GPR)] were performed across the Barton Springs fault and at the vicinity of the Main Barton Springs in south Zilker Park. The purpose of the surveys was two-fold: 1) locate the precise location of submerged conduits (caves, voids) carrying flow to Main Barton Springs; and 2) characterize the geophysical signatures of the fault crossing Barton Springs pool. Geophysical results indicate significant anomalies to the south of the Barton Springs pool. A majority of these anomalies indicate a fault-like pattern, in front of the south entrance to the swimming pool. In addition, resistivity and SP results, in particular, suggest the presence of a large conduit in the southern part of Barton Springs pool. The groundwater flow-path to the Main Barton Springs could follow the locations of those resistivity and SP anomalies along the newly discovered fault, instead of along the Barton Springs fault, as previously thought.

Integrated Nuclear-Renewable Energy Systems: Foundational Workshop Report

Energy Technology Data Exchange (ETDEWEB)

Bragg-Sitton, Shannon [Idaho National Lab. (INL), Idaho Falls, ID (United States); Boardman, Richard [Idaho National Lab. (INL), Idaho Falls, ID (United States); Ruth, Mark [National Renewable Energy Lab. (NREL), Golden, CO (United States); Zinaman, Owen [National Renewable Energy Lab. (NREL), Golden, CO (United States); Forsberg, Charles [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Collins, John [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2014-08-01

The U.S. Department of Energy (DOE) recognizes the need to transform the energy infrastructure of the U.S. and elsewhere to systems that can drastically reduce environmental impacts in an efficient and economically viable manner while utilizing both hydrocarbon resources and clean energy generation sources. Thus, DOE is supporting research and development that could lead to more efficient utilization of clean energy generation sources, including renewable and nuclear options. A concept being advanced by the DOE Offices of Nuclear Energy (NE) and Energy Efficiency and Renewable Energy (EERE) is tighter coupling of nuclear and renewable energy sources in a manner that produces new energy currency for the combined electricity grid, industrial manufacturing, and the transportation energy sectors. This integration concept has been referred to as a “hybrid system” that is capable of providing the right type of energy, at the right time, in the right place. At the direction of DOE-NE and DOE-EERE leadership, project leads at Idaho National Laboratory (INL), National Renewable Energy Laboratory (NREL) and Massachusetts Institute of Technology (MIT) have identified and engaged stakeholders in discussing integrated energy systems that would optimize renewable and nuclear energy integration on a region-by-region basis. Subsequent work will entail conduct of technical, economic, environmental and socio-political evaluations of the leading integrated system options based on a set of criteria established with stakeholder input. The Foundational Workshop for Integrated Nuclear – Renewable Energy Systems was organized around the following objectives: 1. Identify and refine priority region-specific opportunities for integrated nuclear-renewable energy systems in the U.S.; 2. Select Figures of Merit (FOM) to rank and prioritize candidate systems; 3. Discuss enabling technology development needs; 4. Identify analysis requirements, capabilities and gaps to estimate FOM for

Integrated Nuclear-Renewable Energy Systems: Foundational Workshop Report

International Nuclear Information System (INIS)

2014-01-01

The U.S. Department of Energy (DOE) recognizes the need to transform the energy infrastructure of the U.S. and elsewhere to systems that can drastically reduce environmental impacts in an efficient and economically viable manner while utilizing both hydrocarbon resources and clean energy generation sources. Thus, DOE is supporting research and development that could lead to more efficient utilization of clean energy generation sources, including renewable and nuclear options. A concept being advanced by the DOE Offices of Nuclear Energy (NE) and Energy Efficiency and Renewable Energy (EERE) is tighter coupling of nuclear and renewable energy sources in a manner that produces new energy currency for the combined electricity grid, industrial manufacturing, and the transportation energy sectors. This integration concept has been referred to as a ''hybrid system'' that is capable of providing the right type of energy, at the right time, in the right place. At the direction of DOE-NE and DOE-EERE leadership, project leads at Idaho National Laboratory (INL), National Renewable Energy Laboratory (NREL) and Massachusetts Institute of Technology (MIT) have identified and engaged stakeholders in discussing integrated energy systems that would optimize renewable and nuclear energy integration on a region-by-region basis. Subsequent work will entail conduct of technical, economic, environmental and socio-political evaluations of the leading integrated system options based on a set of criteria established with stakeholder input. The Foundational Workshop for Integrated Nuclear - Renewable Energy Systems was organized around the following objectives: 1. Identify and refine priority region-specific opportunities for integrated nuclear-renewable energy systems in the U.S.; 2. Select Figures of Merit (FOM) to rank and prioritize candidate systems; 3. Discuss enabling technology development needs; 4. Identify analysis requirements, capabilities and gaps to

Proceedings of a NEA workshop on probabilistic structure integrity analysis and its relationship to deterministic analysis

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-07-01

This workshop was hosted jointly by the Swedish Nuclear Power Inspectorate (SKi) and the Swedish Royal Institute of Technology (KTH). It was sponsored by the Principal Working Group 3 (PWG-3) of the NEA CSNI. PWG-3 deals with the integrity of structures and components, and has three sub-groups, dealing with the integrity of metal components and structures, ageing of concrete structures, and the seismic behaviour of structures. The sub-group dealing with metal components has three mains areas of activity: non-destructive examination; fracture mechanics; and material degradation. The topic of this workshop is primarily probabilistic fracture mechanics, but probabilistic integrity analysis includes NDE and materials degradation also. Session 1 (5 papers) was devoted to the development of probabilistic models; Session 2 (5 papers) to the random modelling of defects and material properties; Session 3 (8 papers) to the applications of probabilistic modelling to nuclear components; Sessions 4 is a concluding panel discussion

Proceedings of a NEA workshop on probabilistic structure integrity analysis and its relationship to deterministic analysis

International Nuclear Information System (INIS)

1996-01-01

This workshop was hosted jointly by the Swedish Nuclear Power Inspectorate (SKi) and the Swedish Royal Institute of Technology (KTH). It was sponsored by the Principal Working Group 3 (PWG-3) of the NEA CSNI. PWG-3 deals with the integrity of structures and components, and has three sub-groups, dealing with the integrity of metal components and structures, ageing of concrete structures, and the seismic behaviour of structures. The sub-group dealing with metal components has three mains areas of activity: non-destructive examination; fracture mechanics; and material degradation. The topic of this workshop is primarily probabilistic fracture mechanics, but probabilistic integrity analysis includes NDE and materials degradation also. Session 1 (5 papers) was devoted to the development of probabilistic models; Session 2 (5 papers) to the random modelling of defects and material properties; Session 3 (8 papers) to the applications of probabilistic modelling to nuclear components; Sessions 4 is a concluding panel discussion

Clinical aspects of neurodegenerative diseases - 15th HUPO BPP Workshop April 8-9, 2011, Bochum, Germany.

Science.gov (United States)

Gröttrup, Bernd; Böckmann, Miriam; Marcus, Katrin; Wiltfang, Jens; Grinberg, Lea T; Meyer, Helmut E; Park, Young M

2011-11-01

The HUPO Brain Proteome Project (HUPO BPP) held its 15th workshop in Bochum, Germany, from April 8th to 9th, 2011 directly after the Proteomic Forum 2011 in Berlin. Like on every spring workshop, the focus was more on clinical aspects, so that especially clinicians participated in this workshop. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Workshop on Biological Integrity of Coral Reefs August 21-22, 2012, Caribbean Coral Reef Institute, Isla Magueyes, La Parguera, Puerto Rico.

Science.gov (United States)

This report summarizes an EPA-sponsored workshop on coral reef biological integrity held at the Caribbean Coral Reef Institute in La Parguera, Puerto Rico on August 21-22, 2012. The goals of this workshop were to:• Identify key qualitative and quantitative ecological characterist...

Performance evaluation of eddy current transducers and associated instrumentation of integrated garter spring repositioning system

International Nuclear Information System (INIS)

Sharma, B.S.V.G.; Shyam, T.V.; Shrivastava, A.K.; Sinha, R.K.

1997-01-01

To extend the life of coolant channels of operating Indian Pressurised Heavy Water Reactors (PHWRs) of an early generation, repositioning of dislocated Garter Spring (GS) spacers is necessary. For this purpose a remotely operated system named INtegrated Garter spring REpositioning System (INGRES) has been developed. As a part of this system, eddy current transducers namely Garter Spring Detection Probe (GSDP) and Concentricity Detection Probe (CDP) along with respective signal processor units have been designed and developed. These devices detect GS spacers and eccentricity between Pressure Tube (PT) and Calandria Tube (CT) of the channel respectively. During a recent campaign of INGRES at Madras Atomic Power Station unit-2 (MAPS-2), these transducer systems have fulfilled intended design and operational objectives besides providing additional information regarding channel. These aspects are discussed. (author). 6 figs

Proceedings of the geosciences workshop

Energy Technology Data Exchange (ETDEWEB)

None

1991-01-01

The manuscripts in these proceedings represent current understanding of geologic issues associated with the Weldon Spring Site Remedial Action Project (WSSRAP). The Weldon Spring site is in St. Charles County, Missouri. The proceedings are the record of the information presented during the WSSRAP Geosciences Workshop conducted on February 21, 1991. The objective of the workshop and proceedings is to provide the public and scientific community with technical information that will facilitate a common understanding of the geology of the Weldon Spring site, of the studies that have been and will be conducted, and of the issues associated with current and planned activities at the site. This coverage of geologic topics is part of the US Department of Energy overall program to keep the public fully informed of the status of the project and to address public concerns as we clean up the site and work toward the eventual release of the property for use by this and future generations. Papers in these proceedings detail the geology and hydrology of the site. The mission of the WSSRAP derives from the US Department of Energy's Surplus Facilities Management Program. The WSSRAP will eliminate potential hazards to the public and the environment and make surplus real property available for other uses to the extent possible. This will be accomplished by conducting remedial actions which will place the quarry, the raffinate pits, the chemical plant, and the vicinity properties in a radiologically and chemically safe condition. The individual papers have been catalogued separately.

Integral Design workshops: organization, structure and testing

OpenAIRE

Zeiler, W Wim; Savanovic, P Perica

2010-01-01

The purpose of this paper is to achieve an understanding of design activities in the context of building design. The starting point is an overview of design research and design methodology. From the insights gained by this analysis of design in this specific context, we present an 'organization structure and design' workshop approach for collaborative multi-discipline design management. The workshops set-up, used to implement and to test the approach, are presented as well as the experiences ...

Summary and report on four national environmental workshops

Energy Technology Data Exchange (ETDEWEB)

House, Peter W.

1980-07-01

Individual abstracts were prepared for the summaries of four workshops held during the last two years: (1) Integrated Assessment for Energy Related Environmental Standards Workshop - Berkeley, California, November 1978; (2) National Ecological Assessment Workshop - Savannah, Georgia, January 1979; (3) National/Regional Modelling Workshop - Reston, Virginia, May 1979; (4) Groundwater Workshop - Albuquerque, New Mexico, January 1980. (JGB)

Workshop report: US-China workshop on smart structures and smart systems

Science.gov (United States)

Tomizuka, Masayoshi

2006-03-01

A Joint U.S.-China workshop on the topic of Integrated Sensing Systems, Mechatronics and Smart Structures Technologies was held in Jinan, China in October 2005 to evaluate the current status of research and education in the topic areas in the United States and China, to identify critical and strategic research and educational issues of mutual interest, and to identify joint research projects and potential research teams for collaborative research activities. The workshop included a series of presentations by leading researchers and educators from the United States and China and group discussions on the workshop objectives.

Advanced Grid Control Technologies Workshop Series | Energy Systems

Science.gov (United States)

: Smart Grid and Beyond John McDonald, Director, Technical Strategy and Policy Development, General Control Technologies Workshop Series In July 2015, NREL's energy systems integration team hosted workshops the Energy Systems Integration Facility (ESIF) and included a technology showcase featuring projects

PREFACE: International & Interdisciplinary Workshop on Novel Phenomena in Integrated Complex Sciences: from Non-living to Living Systems

Science.gov (United States)

Yoshimura, Kazuyoshi; Ohta, Hiroto; Murase, Masatoshi; Nishimura, Kazuo

2012-03-01

In this workshop recent advancements in experiments and theories were discussed on magnetism and superconductivity, emergent phenomena in biological material, chemical properties and economic problems of non-living and living systems. The aim of the workshop was to discuss old, but also new problems from a multidisciplinary perspective, and to understand the general features behind diversity in condensed matter physics, experimental chemistry and physics in biology and economic science. The workshop was broadly based, and was titled 'International & Interdisciplinary Workshop on Novel Phenomena in Integrated Complex Sciences from Non-living to Living Systems'. However, the primary focus was on magnetism and superconductivity, and NMR research into strongly correlated electrons. The meeting was held as an ICAM workshop, upon official approval in January 2010. Both young scientists and graduate students were invited. We hope that these young scientists had the chance to talk with invited speakers and organizers on their own interests. We thank the participants who contributed through their presentations, discussions and these papers to the advancement of the subject and our understanding. The proceedings are published here in the Journal of Physics: Conference Series (UK). We thank the International Advisory Committee for their advice and guidance: Evgeny Antipov Moscow State University, Russia Nicholas Curro University of California, Davis, USA Minghu Fang Zhejiang University, China Jurgen Haase University of Leipzig, Germany Takashi Imai McMaster University, Canada Peter Lemmens TU Braunschweig, Germany Herwig Michor Vienna TU, Austria Takamasa Momose University of British Columbia, Canada Raivo Stern NICPB, Estonia Louis Taillefer University of Sherbrooke, Canada Masashi Takigawa University of Tokyo, Japan This workshop was mainly organized by the International Research Unit of Integrated Complex System Science, Kyoto University, and was supported by ICAM

RIKEN-JAERI 8-GeV synchrotron radiation project - SPring-8

International Nuclear Information System (INIS)

Awaya, Yohko

1990-01-01

The plan of an 8-GeV synchrotron radiation facility, which is called SPring-8 (Super Photon Ring-8GeV), had been proposed by Science and Technology Agency (STA) in Japan and it was decided that its construction would be started from April 1990. An atomic physics group in Japan had the first meeting in December 1988 to discuss the future studies of atomic physics and related problems at SPring-8 and plans of research and development (R and D) for them. Their report was published in May 1990. In this report, an outline of SPring-8 is described. Results of the discussions of Japanese working group of atomic physics and the present status of R and D of this group will be presented by M. Kimura in this workshop

Waste Separations and Pretreatment Workshop report

International Nuclear Information System (INIS)

Cruse, J.M.; Harrington, R.A.; Quadrel, M.J.

1994-01-01

This document provides the minutes from the Waste Separations and Pretreatment Workshop sponsored by the Underground Storage Tank-Integrated Demonstration in Salt Lake City, Utah, February 3--5, 1993. The Efficient Separations and Processing-Integrated Program and the Hanford Site Tank Waste Remediation System were joint participants. This document provides the detailed minutes, including responses to questions asked, an attendance list, reproductions of the workshop presentations, and a revised chart showing technology development activities

Workshop - Solar cells and daylight. Solar cell house. House building with integrated solar cell systems; Workshop - Solceller og dagslys. Solcellehus. Boligbyggeri med integrerede solcelleanlaeg

Energy Technology Data Exchange (ETDEWEB)

Schroeder, Mio; Hansen, Ellen Kathrine

2005-04-15

The workshop 'Solar cells and daylight' at Aarhus School of Architecture aimed at studying and developing architectural potentials of integrating solar cell systems in building components for future house building. The aim of the process was to stress that technical conditions such as energy technological component design might work as central points of support in the future shaping and organisation of qualitative and functional design of houses. (BA)

1995 building energy codes and standards workshops: Summary and documentation

Energy Technology Data Exchange (ETDEWEB)

Sandahl, L.J.; Shankle, D.L.

1996-02-01

During the spring of 1995, Pacific Northwest National Laboratory (PNNL) conducted four two-day Regional Building Energy Codes and Standards workshops across the US. Workshops were held in Chicago, Denver, Rhode Island, and Atlanta. The workshops were designed to benefit state-level officials including staff of building code commissions, energy offices, public utility commissions, and others involved with adopting/updating, implementing, and enforcing building energy codes in their states. The workshops provided an opportunity for state and other officials to learn more about residential and commercial building energy codes and standards, the role of the US Department of Energy and the Building Standards and Guidelines Program at Pacific Northwest National Laboratory, Home Energy Rating Systems (HERS), Energy Efficient Mortgages (EEM), training issues, and other topics related to the development, adoption, implementation, and enforcement of building energy codes. Participants heard success stories, got tips on enforcement training, and received technical support materials. In addition to receiving information on the above topics, workshop participants had an opportunity to provide input on code adoption issues, building industry training issues, building design issues, and exemplary programs across the US. This paper documents the workshop planning, findings, and follow-up processes.

Proceedings of the CEATI 2010 distribution planning workshop

International Nuclear Information System (INIS)

2010-01-01

This workshop provided a forum for electrical industry distribution experts to discuss methods of distribution planning that will ensure the provision of low-cost and reliable electrical service to present and future customers. Participants in the workshop discussed methods of integrating renewable energy resources, maximizing the use of existing assets, and reducing the carbon footprint of electric utilities. The effects of new loads on reliability, power quality, and voltage stability were considered. Planning distribution system modifications for the future were reviewed. The workshop provided an overview of distribution planning in relation to smart grids. The workshop included sessions on distribution planning for the 21. century; planning for a smarter grid; integrating renewable energy into the distribution system; and planning to manage reliability. The workshop featured 22 presentations, of which 16 have been catalogued separately for inclusion in this database. tabs., figs.

Soil Structure Interaction for Integral Abutment Bridge Using Spring Analogy Approach

International Nuclear Information System (INIS)

Thanoon, W A; Abdulrazeg, A A; Jaafar, M S; Kohnehpooshi, O; Noorzaei, J

2011-01-01

The reaction of the backfill behind the abutments and adjacent to the piles plays a significant role in the behavior of the Integral bridge. The handling of soil-structure interaction in the analysis and design of integral abutment bridges has always been problematic due to its complexity. This study describes the implementation of a 2-D finite element model of IAB system which explicitly incorporates the soil response. The superstructure members and the pile have been represented by means of three-node isoperimetric beam elements with three degree of freedom per node. The Eight node isoperimetric quadrilateral element has been used to model the abutment. The backfill was idealized by uncoupled 'Winkler' spring. The applic1ability of this model is demonstrated by analyzing a single span IA bridge. The results have shown that the shear forces at the tops of the supported piles were only 12% to 16% of the load which at the top of abutment.

Soil Structure Interaction for Integral Abutment Bridge Using Spring Analogy Approach

Energy Technology Data Exchange (ETDEWEB)

Thanoon, W A [Faculty Engineering, Nizwa University (Oman); Abdulrazeg, A A; Jaafar, M S; Kohnehpooshi, O [Department of Civil Engineering, University Putra Malaysia, 43400 Serdang, Selangor (Malaysia); Noorzaei, J, E-mail: jamal@eng.upm.edu.my [Institute of Advance Technology, University Putra Malaysia, 43400 Serdang, Selangor (Malaysia)

2011-02-15

The reaction of the backfill behind the abutments and adjacent to the piles plays a significant role in the behavior of the Integral bridge. The handling of soil-structure interaction in the analysis and design of integral abutment bridges has always been problematic due to its complexity. This study describes the implementation of a 2-D finite element model of IAB system which explicitly incorporates the soil response. The superstructure members and the pile have been represented by means of three-node isoperimetric beam elements with three degree of freedom per node. The Eight node isoperimetric quadrilateral element has been used to model the abutment. The backfill was idealized by uncoupled 'Winkler' spring. The applic1ability of this model is demonstrated by analyzing a single span IA bridge. The results have shown that the shear forces at the tops of the supported piles were only 12% to 16% of the load which at the top of abutment.

Systems, Society, Sustainability and the Geosciences: A Workshop to Create New Curricular Materials to Integrate Geosciences into the Teaching of Sustainability

Science.gov (United States)

Gosselin, D. C.; Manduca, C. A.; Oches, E. A.; MacGregor, J.; Kirk, K. B.

2012-12-01

Sustainability is emerging as a central theme for teaching about the environment, whether it be from the perspective of science, economics, or society. The Systems, Society, Sustainability and the Geosciences workshop provided 48 undergraduate faculty from 46 institutions a forum to discuss the challenges and possibilities for integrating geoscience concepts with a range of other disciplines to teach about the fundamentals of sustainability. Participants from community college to doctorate-granting universities had expertise that included geosciences, agriculture, biological sciences, business, chemistry, economics, ethnic studies, engineering, environmental studies, environmental education, geography, history, industrial technology, landscape design, philosophy, physics, and political science. The workshop modeled a range of teaching strategies that encouraged participants to network and collaborate, share successful strategies and materials for teaching sustainability, and identify opportunities for the development of new curricular materials that will have a major impact on the integration of geosciences into the teaching of sustainability. The workshop design provided participants an opportunity to reflect upon their teaching, learning, and curriculum. Throughout the workshop, participants recorded their individual and collective ideas in a common online workspace to which all had access. A preliminary synthesis of this information indicates that the concept of sustainability is a strong organizing principle for modern, liberal education requiring systems thinking, synthesis and contributions from all disciplines. Sustainability is inherently interdisciplinary and provides a framework for educational collaboration between and among geoscientists, natural/physical scientists, social scientists, humanists, engineers, etc.. This interdisciplinary framework is intellectually exciting and productive for educating students at all levels of higher education

Connecting with the Arts: A Workshop for Middle Grades Teachers

Science.gov (United States)

Annenberg Media, 2005

2005-01-01

"Connecting with the Arts: A Workshop for Middle Grades Teachers" is a video workshop for middle school teachers of the arts and other subjects. The workshop includes eight hour-long video programs and a companion workshop guide and Web site. The workshop shows middle school teachers why and how to integrate the arts (dance, music, theatre, and…

Opening Session - Introductory remarks for Workshop on Accident Tolerant Fuel. OECD/NEA Workshop on Accident Tolerant Fuels, Workshop Expectations

International Nuclear Information System (INIS)

Dujardin, Thierry; Gulliford, Jim; Massara, Simone; Pasamehmetoglu, K.

2013-01-01

The workshop opened with the welcome address from Th. Dujardin (OECD/NEA), NEA Deputy Director. Th. Dujardin recalled the integrated NEA response to the dramatic Fukushima-Daiichi events performed by three standing technical committees: the Committee on Nuclear Regulatory Activities (CNRA), the Committee on the Safety of Nuclear Installations (CSNI) and the Committee on Radiation Protection and Public Health (CRPPH). J. Gulliford (OECD/NEA) placed the workshop in the context of the activities of the Nuclear Science Committee within the framework of the NEA response to Fukushima- Daiichi. K. Pasamehmetoglu (INL, US) explained the main goals of the workshop oriented towards defining requirements for selection among various options during the feasibility phase of the development process, and not towards identifying and proposing design solutions

Microfabrication and integration of a sol-gel PZT folded spring energy harvester.

Science.gov (United States)

Lueke, Jonathan; Badr, Ahmed; Lou, Edmond; Moussa, Walied A

2015-05-26

This paper presents the methodology and challenges experienced in the microfabrication, packaging, and integration of a fixed-fixed folded spring piezoelectric energy harvester. A variety of challenges were overcome in the fabrication of the energy harvesters, such as the diagnosis and rectification of sol-gel PZT film quality and adhesion issues. A packaging and integration methodology was developed to allow for the characterizing the harvesters under a base vibration. The conditioning circuitry developed allowed for a complete energy harvesting system, consisting a harvester, a voltage doubler, a voltage regulator and a NiMH battery. A feasibility study was undertaken with the designed conditioning circuitry to determine the effect of the input parameters on the overall performance of the circuit. It was found that the maximum efficiency does not correlate to the maximum charging current supplied to the battery. The efficiency and charging current must be balanced to achieve a high output and a reasonable output current. The development of the complete energy harvesting system allows for the direct integration of the energy harvesting technology into existing power management schemes for wireless sensing.

Effectiveness of Workshop Style Teaching in Students' Learning of Introductory Electricity and Magnetism

Science.gov (United States)

Mehta, Nirav; Cheng, Kelvin

2012-10-01

We have developed an interactive workshop-style course for our introductory calculus-based physics sequence at Trinity University. Lecture is limited to approximately 15 min. at the beginning of class, and the remainder of the 50-min. class is devoted to inquiry-based activities and problem solving. So far, lab is done separately and we have not incorporated the lab component into the workshop model. We use the Brief Electricity and Magnetism Assessment (BEMA) to compare learning gains between the workshop and traditional lecture-based course for the Spring 2012 semester. Both the workshop and lecture courses shared the same inquiry-based lab component that involved pre-labs, prediction-observation and post-lab activities. Our BEMA results indicate statistically significant improvement in overall learning gains compared to the traditional course. We compare our workshop BEMA scores both to traditional lecture scores here at Trinity and to those from other institutions.

A Long Journey from Childhood to Senility: The 23rd HUPO BPP Workshop: 16-17 April 2015, São Paulo, Brazil.

Science.gov (United States)

Magraoui, Fouzi El; Schrötter, Andreas; Heinsen, Helmut; Leite, Renata; Park, Young Mok; Meyer, Helmut E; Grinberg, Lea T

2015-09-01

The HUPO Brain Proteome Project (HUPO BPP) held its 23rd workshop in São Paulo, Brazil, April 16-17, 2015. The focus of the spring workshop was on strategies and predictive therapies concerning neurodegenerative diseases. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Report of the Workshop on Petascale Systems Integration for LargeScale Facilities

Energy Technology Data Exchange (ETDEWEB)

Kramer, William T.C.; Walter, Howard; New, Gary; Engle, Tom; Pennington, Rob; Comes, Brad; Bland, Buddy; Tomlison, Bob; Kasdorf, Jim; Skinner, David; Regimbal, Kevin

2007-10-01

There are significant issues regarding Large Scale System integration that are not being addressed in other forums such as current research portfolios or vendor user groups. Unfortunately, the issues in the area of large-scale system integration often fall into a netherworld; not research, not facilities, not procurement, not operations, not user services. Taken together, these issues along with the impact of sub-optimal integration technology means the time required to deploy, integrate and stabilize large scale system may consume up to 20 percent of the useful life of such systems. Improving the state of the art for large scale systems integration has potential to increase the scientific productivity of these systems. Sites have significant expertise, but there are no easy ways to leverage this expertise among them . Many issues inhibit the sharing of information, including available time and effort, as well as issues with sharing proprietary information. Vendors also benefit in the long run from the solutions to issues detected during site testing and integration. There is a great deal of enthusiasm for making large scale system integration a full-fledged partner along with the other major thrusts supported by funding agencies in the definition, design, and use of a petascale systems. Integration technology and issues should have a full 'seat at the table' as petascale and exascale initiatives and programs are planned. The workshop attendees identified a wide range of issues and suggested paths forward. Pursuing these with funding opportunities and innovation offers the opportunity to dramatically improve the state of large scale system integration.

Rotor-bearing system integrated with shape memory alloy springs for ensuring adaptable dynamics and damping enhancement-Theory and experiment

DEFF Research Database (Denmark)

Enemark, Søren; Santos, Ilmar F.

2016-01-01

nonlinear coupled dynamics of the rotor-bearing system. The nonlinear forces from the thermomechanical shape memory alloy springs and from the passive magnetic bearings are coupled to the rotor and bearing housing dynamics. The equations of motion describing rotor tilt and bearing housing lateral motion......Helical pseudoelastic shape memory alloy (SMA) springs are integrated into a dynamic system consisting of a rigid rotor supported by passive magnetic bearings. The aim is to determine the utility of SMAs for vibration attenuation via their mechanical hysteresis, and for adaptation of the dynamic...

Integration of Work and Learning. Proceedings of the Workshop on Curriculum Innovation (2nd, Bled, Slovenia, September 1997).

Science.gov (United States)

European Training Foundation, Turin (Italy).

This proceedings consists of 13 papers and 3 working group presentations from a 3-day workshop on issues of work-linked learning relevant for curriculum development. "Welcome" (Slavko Gaber, Peter de Rooij) is followed by two introductory papers: "Integration of Work and Learning: A Challenge for Both Schools and Companies"…

Microfabrication and Integration of a Sol-Gel PZT Folded Spring Energy Harvester

Directory of Open Access Journals (Sweden)

Jonathan Lueke

2015-05-01

Full Text Available This paper presents the methodology and challenges experienced in the microfabrication, packaging, and integration of a fixed-fixed folded spring piezoelectric energy harvester. A variety of challenges were overcome in the fabrication of the energy harvesters, such as the diagnosis and rectification of sol-gel PZT film quality and adhesion issues. A packaging and integration methodology was developed to allow for the characterizing the harvesters under a base vibration. The conditioning circuitry developed allowed for a complete energy harvesting system, consisting a harvester, a voltage doubler, a voltage regulator and a NiMH battery. A feasibility study was undertaken with the designed conditioning circuitry to determine the effect of the input parameters on the overall performance of the circuit. It was found that the maximum efficiency does not correlate to the maximum charging current supplied to the battery. The efficiency and charging current must be balanced to achieve a high output and a reasonable output current. The development of the complete energy harvesting system allows for the direct integration of the energy harvesting technology into existing power management schemes for wireless sensing.

Annual Cybersecurity & Resilience Workshop | Energy Systems Integration

Science.gov (United States)

architecture for DER. Cross-Cutting Panels and Breakout Sessions Workshop attendees participated in three cross , business, and policy perspective. The below videos showcase one of the three cross-cutting panel Architecture: Toward a Buildable Architecture Supporting Fractal Microgrids Toby Considine, President, TC9 Inc

How Partners are Producing Science and Addressing Issues of Scale for Springs Management in the Desert Southwest

Science.gov (United States)

Johnson, G.; Springer, A. E.; Misztal, L.; Grabau, M.

2017-12-01

Climate changes in the arid Southwest are expected to further stress critical water sources, such as springs, in the near future. Springs are abundant features in the Southwest, providing habitat for listed species and water for wildlife, agricultural, cities, recreation, and the base flow for many rivers. But springs occupy a small fraction of the land area and, as a result, they have not been significantly studied or mapped. Managers recognize that effective stewardship of these critical resources requires a landscape-scale understanding of distribution, ecological integrity, and risks; access to comprehensive inventory, assessment and restoration protocols; and local implementation. They need easy access to information at varying scales to respond to stressors like climate change. The Desert Landscape Conservation Cooperative, Sky Island Alliance, and Springs Stewardship Institute worked with scientists, resource managers, and conservationists to develop and increase access to data by involving them in the entire research process through field surveys, workshops, trainings, and development of products needed to solve critical management challenges. We built on and connected existing efforts underway in the Southwest, including developing: 1) Springs Inventory Protocol, 2) an online geospatial database, 3) methodologies for climate-savvy monitoring and 4) a springs restoration handbook. We also worked with partners to evaluate the condition and risk of springs' resources at the local scale to create products used in site-specific management planning. Our results indicate that coproduction resulted in more understanding of common issues, more focus on solving management challenges, and increased use of the science and protocols produced. Information developed through this project assists managers in understanding how their springs contribute at local and landscape scales. New information developed through this project is being used in support of planning and

Proceedings of the 2nd Annual Tank Integrity Workshop

International Nuclear Information System (INIS)

Edelson, M.C.; Thompson, R. Bruce

2001-01-01

radioactive wastes and, in many cases, these tanks are at or have already exceeded their design lives. The DOE Tanks Focus Area (TFA) was created in 1996 to help develop new technologies to, in part, measure the integrity of these tanks so that their continued safe use could be assured. In 2001, technical staff members from Oak Ridge, Savannah River, West Valley Demonstration Project, Idaho National Engineering and Environmental Laboratory, Hanford, and the Defense Nuclear Facilities Safety Board met with TFA and CMST staff at a workshop organized by the CNDE for TFA to identify significant impediments, if any, to the safe operation and management of large storage tanks at their sites. A second goal of the meeting was to establish groundwork for collaborative efforts aimed at eliminating these impediments and the improvement of networking among individuals at the various sites. The attendees found the workshop useful and a second workshop was scheduled for FY2002. Electronic copies of workshop presentations are included on this CD and hyperlinked to his text. Hard copies of the presentations are included in the bound copy of the proceedings. These presentations should be referred to for further details on the material presented below

The Begg's uprighting spring - Revisited.

Science.gov (United States)

Kumar, Vinay; Sundareswaran, Shobha

2015-01-01

Uprighting springs, an integral part of the Begg ligsht wire differential force technique is gaining more and more popularity, as a useful adjunct in contemporary preadjusted edgewise appliance systems as well. It can be used with brackets containing vertical slots for mesiodistal crown uprighting, or as braking auxiliaries providing additional anchorage while protracting posteriors. Here, we present a simple and quick chair side method of fabricating and customizing uprighting springs according to the required crown/root movement for correction. This communication would serve as a ready reckoner during fabrication of the springs, thus dispelling the confusion that usually arises regarding direction and position of the coil and active arm.

A spring-mass-damper system dynamics-based driver-vehicle integrated model for representing heterogeneous traffic

Science.gov (United States)

Munigety, Caleb Ronald

2018-04-01

The traditional traffic microscopic simulation models consider driver and vehicle as a single unit to represent the movements of drivers in a traffic stream. Due to this very fact, the traditional car-following models have the driver behavior related parameters, but ignore the vehicle related aspects. This approach is appropriate for homogeneous traffic conditions where car is the major vehicle type. However, in heterogeneous traffic conditions where multiple vehicle types are present, it becomes important to incorporate the vehicle related parameters exclusively to account for the varying dynamic and static characteristics. Thus, this paper presents a driver-vehicle integrated model hinged on the principles involved in physics-based spring-mass-damper mechanical system. While the spring constant represents the driver’s aggressiveness, the damping constant and the mass component take care of the stability and size/weight related aspects, respectively. The proposed model when tested, behaved pragmatically in representing the vehicle-type dependent longitudinal movements of vehicles.

CNV Workshop: an integrated platform for high-throughput copy number variation discovery and clinical diagnostics.

Science.gov (United States)

Gai, Xiaowu; Perin, Juan C; Murphy, Kevin; O'Hara, Ryan; D'arcy, Monica; Wenocur, Adam; Xie, Hongbo M; Rappaport, Eric F; Shaikh, Tamim H; White, Peter S

2010-02-04

Recent studies have shown that copy number variations (CNVs) are frequent in higher eukaryotes and associated with a substantial portion of inherited and acquired risk for various human diseases. The increasing availability of high-resolution genome surveillance platforms provides opportunity for rapidly assessing research and clinical samples for CNV content, as well as for determining the potential pathogenicity of identified variants. However, few informatics tools for accurate and efficient CNV detection and assessment currently exist. We developed a suite of software tools and resources (CNV Workshop) for automated, genome-wide CNV detection from a variety of SNP array platforms. CNV Workshop includes three major components: detection, annotation, and presentation of structural variants from genome array data. CNV detection utilizes a robust and genotype-specific extension of the Circular Binary Segmentation algorithm, and the use of additional detection algorithms is supported. Predicted CNVs are captured in a MySQL database that supports cohort-based projects and incorporates a secure user authentication layer and user/admin roles. To assist with determination of pathogenicity, detected CNVs are also annotated automatically for gene content, known disease loci, and gene-based literature references. Results are easily queried, sorted, filtered, and visualized via a web-based presentation layer that includes a GBrowse-based graphical representation of CNV content and relevant public data, integration with the UCSC Genome Browser, and tabular displays of genomic attributes for each CNV. To our knowledge, CNV Workshop represents the first cohesive and convenient platform for detection, annotation, and assessment of the biological and clinical significance of structural variants. CNV Workshop has been successfully utilized for assessment of genomic variation in healthy individuals and disease cohorts and is an ideal platform for coordinating multiple associated

CNV Workshop: an integrated platform for high-throughput copy number variation discovery and clinical diagnostics

Directory of Open Access Journals (Sweden)

Rappaport Eric F

2010-02-01

Full Text Available Abstract Background Recent studies have shown that copy number variations (CNVs are frequent in higher eukaryotes and associated with a substantial portion of inherited and acquired risk for various human diseases. The increasing availability of high-resolution genome surveillance platforms provides opportunity for rapidly assessing research and clinical samples for CNV content, as well as for determining the potential pathogenicity of identified variants. However, few informatics tools for accurate and efficient CNV detection and assessment currently exist. Results We developed a suite of software tools and resources (CNV Workshop for automated, genome-wide CNV detection from a variety of SNP array platforms. CNV Workshop includes three major components: detection, annotation, and presentation of structural variants from genome array data. CNV detection utilizes a robust and genotype-specific extension of the Circular Binary Segmentation algorithm, and the use of additional detection algorithms is supported. Predicted CNVs are captured in a MySQL database that supports cohort-based projects and incorporates a secure user authentication layer and user/admin roles. To assist with determination of pathogenicity, detected CNVs are also annotated automatically for gene content, known disease loci, and gene-based literature references. Results are easily queried, sorted, filtered, and visualized via a web-based presentation layer that includes a GBrowse-based graphical representation of CNV content and relevant public data, integration with the UCSC Genome Browser, and tabular displays of genomic attributes for each CNV. Conclusions To our knowledge, CNV Workshop represents the first cohesive and convenient platform for detection, annotation, and assessment of the biological and clinical significance of structural variants. CNV Workshop has been successfully utilized for assessment of genomic variation in healthy individuals and disease cohorts and

Cognition in Space Workshop. 1; Metrics and Models

Science.gov (United States)

Woolford, Barbara; Fielder, Edna

2005-01-01

"Cognition in Space Workshop I: Metrics and Models" was the first in a series of workshops sponsored by NASA to develop an integrated research and development plan supporting human cognition in space exploration. The workshop was held in Chandler, Arizona, October 25-27, 2004. The participants represented academia, government agencies, and medical centers. This workshop addressed the following goal of the NASA Human System Integration Program for Exploration: to develop a program to manage risks due to human performance and human error, specifically ones tied to cognition. Risks range from catastrophic error to degradation of efficiency and failure to accomplish mission goals. Cognition itself includes memory, decision making, initiation of motor responses, sensation, and perception. Four subgoals were also defined at the workshop as follows: (1) NASA needs to develop a human-centered design process that incorporates standards for human cognition, human performance, and assessment of human interfaces; (2) NASA needs to identify and assess factors that increase risks associated with cognition; (3) NASA needs to predict risks associated with cognition; and (4) NASA needs to mitigate risk, both prior to actual missions and in real time. This report develops the material relating to these four subgoals.

ATLAS TRT 2002 Workshop

CERN Multimedia

Capeans, M.

Starting on 17th May, the ATLAS TRT 2002 Workshop was organised by Ken MacFarlane and his team at Hampton University, Virginia, USA. During a welcome break in the very dense workshop programme, the group enjoyed a half-day long boat trip along the waterways, offering a first-hand look at the history and heritage of this part of America. The attendance during the six-day workshop was about 50 people representing most of the collaborating institutes, although many Russian colleagues had stayed in their institutes to pursue the start-up of end-cap wheel production at PNPI and DUBNA. The meeting clearly showed that, during the year 2002, the TRT community is focusing on final design issues and module/wheel construction, while moving at the same time towards acceptance testing and integration, including the front-end electronics. The two main topics treated at the workshop were the preparation for beginning full production of the FE electronics, and the wire-joint problem that the US barrel colleagues have been fa...

Spring in the Arab Spring

NARCIS (Netherlands)

Borg, G.J.A.

2011-01-01

Column Gert Borg | Spring in the Arab Spring door dr. Gert Borg, onderzoeker bij Islam en Arabisch aan de Radboud Universiteit Nijmegen en voormalig directeur van het Nederlands-Vlaams Instituut Caïro Spring If, in Google, you type "Arab Spring" and hit the button, you get more than

Scenario Development Workshop Synopsis. Integration Group for the Safety Case - June 2015

International Nuclear Information System (INIS)

Smith, Paul; Voinis, Sylvie; Griffault, Lise; De Meredieu, Jean; Kwong, Gloria; ); Van Luik, Abraham; Bailey, Lucy; Capouet, Manuel; Depaus, Christophe; Makino, Hitoshi; Leigh, Christi; Kirkes, Ross; Leino, Jaakko; Niemeyer, Matthias; Wolf, Jens; Watson, Sarah; Franke, Bettina; Ilett, Doug; Pastina, Barbara; Weetjens, Eef

2016-03-01

Scenario development and selection describes the collection and organisation of the scientific and technical information relevant to the potential paths of evolution of a radioactive waste disposal facility (repository) that is necessary to assess its long-term performance and safety. In 1999, the NEA held its first workshop on scenario development in Madrid, Spain, with the objective to review the methods for developing scenarios in safety assessments and their application. Since then, the process of scenario development and analysis for the disposal of radioactive waste has changed and, in 2015, the NEA Integration Group for the Safety Case (IGSC) held a second workshop on this topic at its offices in Paris to further evaluate the experience acquired in developing scenarios since 1999. To prepare for this workshop, the IGSC also launched a survey in 2014 to gather the latest scenario development and uncertainty management strategies used in IGSC member countries. The purposes of the workshop were to (i) provide a forum to review and discuss methods for scenario development and their contribution to the development of recent safety cases (since the 1999 workshop); (ii) examine the latest methods and compare their scope, consistency and function within the overall safety assessment process, based on practical experience of applications; and (iii) provide a basis for producing the present report summarising the current status of scenario methodologies, identifying where sufficient methods exist and any outstanding problem areas. This report provides an overview of the state of the art in scenario development related to the long-term safety of geological repositories for radioactive waste. In particular, it discusses how potential scenarios are developed in safety assessments of radioactive waste that contains long-lived radionuclides. Safety assessment is the process of quantitatively and qualitatively evaluating the safety of a repository, often in support of a

Syria in the Arab Spring: The integration of Syria’s conflict with the Arab uprisings, 2011–2013

Directory of Open Access Journals (Sweden)

Marc Lynch

2014-10-01

Full Text Available How did Syria’s conflict interact with the broader wave of regional protest known as the Arab Spring? This article uses a unique, complete Twitter dataset of tweets including the word “Syria” in English or Arabic to empirically test how Syria’s conflict was discussed online. The analysis shows a high level of interaction between Syria and other Arab countries through 2011. Other Arab countries experiencing popular protests (“Arab Spring countries” were referenced far more often in 2011 than were Syria’s immediate neighbors, while keyword analysis shows the framing of the conflict in terms of Syria’s “regime” aligned the conflict with other Arab uprisings. In 2012–2013 this changed sharply, with significantly fewer mentions of other Arab countries, particularly Arab Spring countries, more fundraising and political appeals across the Gulf, and growing Islamization. These findings offer one of the first empirical demonstrations of the integration and disintegration of a unified Arab discourse from 2011 to 2013, with significant implications for theories of the diffusion of protest and ideas.

Ninth Thermal and Fluids Analysis Workshop Proceedings

Science.gov (United States)

Sakowski, Barbara (Compiler)

1999-01-01

The Ninth Thermal and Fluids Analysis Workshop (TFAWS 98) was held at the Ohio Aerospace Institute in Cleveland, Ohio from August 31 to September 4, 1998. The theme for the hands-on training workshop and conference was "Integrating Computational Fluid Dynamics and Heat Transfer into the Design Process." Highlights of the workshop (in addition to the papers published herein) included an address by the NASA Chief Engineer, Dr. Daniel Mulville; a CFD short course by Dr. John D. Anderson of the University of Maryland; and a short course by Dr. Robert Cochran of Sandia National Laboratories. In addition, lectures and hands-on training were offered in the use of several cutting-edge engineering design and analysis-oriented CFD and Heat Transfer tools. The workshop resulted in international participation of over 125 persons representing aerospace and automotive industries, academia, software providers, government agencies, and private corporations. The papers published herein address issues and solutions related to the integration of computational fluid dynamics and heat transfer into the engineering design process. Although the primary focus is aerospace, the topics and ideas presented are applicable to many other areas where these and other disciplines are interdependent.

Sixth international workshop on linear colliders. Proceedings

Energy Technology Data Exchange (ETDEWEB)

Urakawa, Junji [ed.

1995-08-01

The sixth international workshop on linear colliders (LC95) was held by KEK at Tsukuba Center for Institute. In the workshop 8 parallel working group were organized: WG1 (beam sources and injection linacs), WG2 (damping rings and bunch compressors), WG3 (a: RF sources and structures, b: superconducting cavities, c: two beam accelerators), WG4 (beam dynamics in main linacs), WG5 (final focus and integration regions), WG6 (beam instrumentation), WG7 (overall parameters and construction techniques), WG8 (gamma-gamma collider and miscellaneous). This issue compiles materials which were used in the workshop. (J.P.N.).

Sixth international workshop on linear colliders. Proceedings

International Nuclear Information System (INIS)

Urakawa, Junji

1995-08-01

The sixth international workshop on linear colliders (LC95) was held by KEK at Tsukuba Center for Institute. In the workshop 8 parallel working group were organized: WG1 (beam sources and injection linacs), WG2 (damping rings and bunch compressors), WG3 (a: RF sources and structures, b: superconducting cavities, c: two beam accelerators), WG4 (beam dynamics in main linacs), WG5 (final focus and integration regions), WG6 (beam instrumentation), WG7 (overall parameters and construction techniques), WG8 (gamma-gamma collider and miscellaneous). This issue compiles materials which were used in the workshop. (J.P.N.)

Workshop on detectors for third-generation synchrotron sources: Proceedings

International Nuclear Information System (INIS)

1994-12-01

The aims of the workshop were (1) to acquaint APS users with current R and D being carried out on detectors, (2) to identify new detector systems possible during the next five years, (3) to identify new detectors theoretically possible in the future, (4) to stimulate interactions between user groups and detector developers, and (5) to obtain recommendations from expert panels on technical issues needing resolution. Development of detectors at ESRF, Spring-8, BNL, CERN and LBL are included

Workshop on detectors for third-generation synchrotron sources: Proceedings

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-12-01

The aims of the workshop were (1) to acquaint APS users with current R and D being carried out on detectors, (2) to identify new detector systems possible during the next five years, (3) to identify new detectors theoretically possible in the future, (4) to stimulate interactions between user groups and detector developers, and (5) to obtain recommendations from expert panels on technical issues needing resolution. Development of detectors at ESRF, Spring-8, BNL, CERN and LBL are included.

Early diagnosis of neurodegenerative diseases - the long awaited Holy Grail and bottleneck of modern brain research - 19th HUPO BPP workshop: May 22-24, 2013, Dortmund, Germany.

Science.gov (United States)

Schrötter, Andreas; Magraoui, Fouzi El; Gröttrup, Bernd; Wiltfang, Jens; Heinsen, Helmut; Marcus, Katrin; Meyer, Helmut E; Grinberg, Lea T; Park, Young Mok

2013-10-01

The HUPO Brain Proteome Project (HUPO BPP) held its 19th workshop in Dortmund, Germany, from May 22 to 24, 2013. The focus of the spring workshop was on strategies and developments concerning early diagnosis of neurodegenerative diseases. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Human genetics for non-scientists: Practical workshops for policy makers and opinion leaders

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-12-31

These workshops form part of a series of workshops that the Banbury and the DNA Learning Centers of Cold Spring Harbor Laboratory have held for a number of years, introducing genetics, and the ways in which scientific research is done, to non-scientists. The purpose of the workshops as stated in the grant application was: {open_quotes}Our objective is to foster a better understanding of the societal impact of human genome research by providing basic information on genetics to non-scientists whose professions or special interests interface with genetic technology.... Participants will be chosen for their interest in human genetics and for their roles as opinion leaders in their own communities. Primary care physicians are of particular interest to us for this series of workshops.{close_quotes} Two workshops were held under this grant. The first was held in 21-24 April, 1994 and attended by 20 participants, and the second was held 16-19 November, 1995, and attended by 16 participants. In each case, there was a combination of concept lectures on the foundations of human molecular genetics; lectures by invited specialists; and laboratory experiments to introduce non-scientists to the techniques used in molecular genetics.

Spring performance tester for miniature extension springs

Science.gov (United States)

Salzbrenner, Bradley; Boyce, Brad

2017-05-16

A spring performance tester and method of testing a spring are disclosed that has improved accuracy and precision over prior art spring testers. The tester can perform static and cyclic testing. The spring tester can provide validation for product acceptance as well as test for cyclic degradation of springs, such as the change in the spring rate and fatigue failure.

Risk Management Techniques and Practice Workshop Workshop Report

Energy Technology Data Exchange (ETDEWEB)

Quinn, T; Zosel, M

2008-12-02

vendor technical or business problems. HPC, by its very nature, is an exercise in multi-level risk management. Every aspect of stewarding HPCCs into the petascale era, from identification of the program drivers to the details of procurement actions and simulation environment component deployments, represents unprecedented challenges and requires effective risk management. The fundamental purpose of this workshop was to go beyond risk management processes as such and learn how to weave effective risk management practices, techniques, and methods into all aspects of migrating HPCCs into the next generation of leadership computing systems. This workshop was a follow-on to the Petascale System Integration Workshop hosted by Lawrence Berkeley National Laboratory (LBNL)/NERSC last year. It was intended to leverage and extend the risk management experience of the participants by looking for common best practices and unique processes that have been especially successful. This workshop assessed the effectiveness of tools and techniques that are or could be helpful in HPCC risk management, with a special emphasis on how practice meets process. As the saying goes: 'In theory, there is no difference between theory and practice. In practice there is'. Finally, the workshop brought together a network of experts who shared information as technology moves into the petascale era and beyond.

Second Greenhouse Gas Information System Workshop

Science.gov (United States)

Boland, S. W.; Duren, R. M.; Mitchiner, J.; Rotman, D.; Sheffner, E.; Ebinger, M. H.; Miller, C. E.; Butler, J. H.; Dimotakis, P.; Jonietz, K.

2009-12-01

The second Greenhouse Gas Information System (GHGIS) workshop was held May 20-22, 2009 at the Sandia National Laboratories in Albuquerque, New Mexico. The workshop brought together 74 representatives from 28 organizations including U.S. government agencies, national laboratories, and members of the academic community to address issues related to the understanding, operational monitoring, and tracking of greenhouse gas emissions and carbon offsets. The workshop was organized by an interagency collaboration between NASA centers, DOE laboratories, and NOAA. It was motivated by the perceived need for an integrated interagency, community-wide initiative to provide information about greenhouse gas sources and sinks at policy-relevant temporal and spatial scales in order to significantly enhance the ability of national and regional governments, industry, and private citizens to implement and evaluate effective climate change mitigation policies. This talk provides an overview of the second Greenhouse Gas Information System workshop, presents its key findings, and discusses current status and next steps in this interagency collaborative effort.

Planning for Integrated Science Education in Africa. Report of a Regional Workshop.

Science.gov (United States)

United Nations Educational, Scientific, and Cultural Organization, Paris (France).

This report of a workshop held in Nigeria for the leaders of science education at primary and lower secondary levels in 15 African nations describes the status of science instruction in those countries. The workshop was sponsored by UNESCO/UNICEF and continued from September 20th through October 4th, 1971. The main address to the conference,…

Preparing Residents for Teaching Careers: The Faculty for Tomorrow Resident Workshop.

Science.gov (United States)

Lin, Steven; Gordon, Paul

2017-03-01

Progress toward growing the primary care workforce is at risk of being derailed by an emerging crisis: a critical shortage of family medicine faculty. In response to the faculty shortage, the Society of Teachers of Family Medicine (STFM) launched a 2-year initiative called "Faculty for Tomorrow" (F4T). The F4T Task Force created a workshop designed to increase residents' interest in, and prepare them for, careers in academic family medicine. We aimed to evaluate the effectiveness of this workshop. Participants were family medicine residents who preregistered for and attended the F4T Resident Workshop at the 2016 STFM Annual Spring Conference. The intervention was a full-day, 9-hour preconference workshop delivered by a multi-institutional faculty team. Participants were asked to complete a questionnaire before and immediately after the workshop. Data collected included demographics, residency program characteristics, future career plans, self-reported confidence in skills, and general knowledge relevant to becoming faculty. A total of 75 participants attended the workshop. The proportion of those who were "extremely likely" to pursue a career in academic family medicine increased from 58% to 72%. Participants reported statistically significant improvements in their confidence in clinical teaching, providing feedback to learners, writing an effective CV, knowledge about the structure of academic family medicine, and knowledge about applying for a faculty position. The STFM F4T Resident Workshop was effective at increasing participants' interest in academic careers, as well as self-reported confidence in skills and knowledge relevant to becoming faculty. The data collected from participants regarding their career plans may inform future interventions.

Using methodical design for culture change in Dutch building design practice : karning by doing' workshops

NARCIS (Netherlands)

Savanovic, P.; Zeiler, W.

2007-01-01

Since 2001 the ‘integral approach’ has been propagated within Dutch building design practice, through continuously developing ‘learning by doing’ workshops. The organization of workshops started during the ‘Integral Design’ project that was conducted by the Dutch Society for Building Services

Flywheel energy storage workshop

Energy Technology Data Exchange (ETDEWEB)

O`Kain, D.; Carmack, J. [comps.

1995-12-31

Since the November 1993 Flywheel Workshop, there has been a major surge of interest in Flywheel Energy Storage. Numerous flywheel programs have been funded by the Advanced Research Projects Agency (ARPA), by the Department of Energy (DOE) through the Hybrid Vehicle Program, and by private investment. Several new prototype systems have been built and are being tested. The operational performance characteristics of flywheel energy storage are being recognized as attractive for a number of potential applications. Programs are underway to develop flywheels for cars, buses, boats, trains, satellites, and for electric utility applications such as power quality, uninterruptible power supplies, and load leveling. With the tremendous amount of flywheel activity during the last two years, this workshop should again provide an excellent opportunity for presentation of new information. This workshop is jointly sponsored by ARPA and DOE to provide a review of the status of current flywheel programs and to provide a forum for presentation of new flywheel technology. Technology areas of interest include flywheel applications, flywheel systems, design, materials, fabrication, assembly, safety & containment, ball bearings, magnetic bearings, motor/generators, power electronics, mounting systems, test procedures, and systems integration. Information from the workshop will help guide ARPA & DOE planning for future flywheel programs. This document is comprised of detailed viewgraphs.

Third international spent fuel storage technology symposium/workshop: proceedings. Volume 2

International Nuclear Information System (INIS)

1986-01-01

The scope of this meeting comprised dry storage and rod consolidation, emphasizing programs on water reactor fuel with zirconium alloy cladding. Volume 2 contains the papers from the poster session and workshops that were conducted during the meeting. There were 18 poster presentations. Four workshops were held: Fuel Integrity; Storage System Modeling and Analysis; Rod Consolidation Technology; and System Integration and Optimization. Individual papers were processed for inclusion in the Energy Data Base

76 FR 53689 - National Institute of Mental Health; Notice of Workshop

Science.gov (United States)

2011-08-29

... for Autism Spectrum Disorder Research and to inform other activities of the committee. The workshop... Autism Coordinating Committee (IACC) Services Subcommittee. The purpose of the IACC Services Workshop: ``Enhancing Supports for People with Autism and Their Families: Community Integration and the Changing...

EMSL and Institute for Integrated Catalysis (IIC) Catalysis Workshop

Energy Technology Data Exchange (ETDEWEB)

Campbell, Charles T.; Datye, Abhaya K.; Henkelman, Graeme A.; Lobo, Raul F.; Schneider, William F.; Spicer, Leonard D.; Tysoe, Wilfred T.; Vohs, John M.; Baer, Donald R.; Hoyt, David W.; Thevuthasan, Suntharampillai; Mueller, Karl T.; Wang, Chong M.; Washton, Nancy M.; Lyubinetsky, Igor; Teller, Raymond G.; Andersen, Amity; Govind, Niranjan; Kowalski, Karol; Kabius, Bernd C.; Wang, Hongfei; Campbell, Allison A.; Shelton, William A.; Bylaska, Eric J.; Peden, Charles HF; Wang, Yong; King, David L.; Henderson, Michael A.; Rousseau, Roger J.; Szanyi, Janos; Dohnalek, Zdenek; Mei, Donghai; Garrett, Bruce C.; Ray, Douglas; Futrell, Jean H.; Laskin, Julia; DuBois, Daniel L.; Kuprat, Laura R.; Plata, Charity

2011-05-24

Within the context of significantly accelerating scientific progress in research areas that address important societal problems, a workshop was held in November 2010 at EMSL to identify specific and topically important areas of research and capability needs in catalysis-related science.

Providing Effective Professional Development for Teachers through the Lunar Workshops for Educators

Science.gov (United States)

Canipe, Marti; Buxner, Sanlyn; Jones, Andrea; Hsu, Brooke; Shaner, Andy; Bleacher, Lora

2014-11-01

In order to integrate current scientific discoveries in the classroom, K-12 teachers benefit from professional development and support. The Lunar Workshops for Educators is a series of weeklong workshops for grade 6-9 science teachers focused on lunar science and exploration, sponsored by the Lunar Reconnaissance Orbiter (LRO) and conducted by the LRO Education and Public Outreach (E/PO) Team. The Lunar Workshops for Educators, have provided this professional development for teachers for the last five years. Program evaluation includes pre- and post- content tests and surveys related to classroom practice, daily surveys, and follow-up surveys conducted during the academic year following the summer workshops to assess how the knowledge and skills learned at the workshop are being used in the classroom. The evaluation of the workshop shows that the participants increased their overall knowledge of lunar science and exploration. Additionally, they gained knowledge about student misconceptions related to the Moon and ways to address those misconceptions. The workshops impacted the ways teachers taught about the Moon by providing them with resources to teach about the Moon and increased confidence in teaching about these topics. Participants reported ways that the workshop impacted their teaching practices beyond teaching about the Moon, encouraging them to include more inquiry and other teaching techniques demonstrated in the workshops in their science classes. Overall, the program evaluation has shown the Lunar Workshops for Educators are effective at increasing teachers’ knowledge about the Moon and use of inquiry-based teaching into their classrooms. Additionally, the program supports participant teachers in integrating current scientific discoveries into their classrooms.

Report of the fifth international workshop on human X chromosome mapping

Energy Technology Data Exchange (ETDEWEB)

Willard, H.F.; Cremers, F.; Mandel, J.L.; Monaco, A.P.; Nelson, D.L.; Schlessinger, D.

1994-12-31

A high-quality integrated genetic and physical map of the X chromosome from telomere to telomere, based primarily on YACs formatted with probes and STSs, is increasingly close to reality. At the Fifth International X Chromosome Workshop, organized by A.M. Poustka and D. Schlessinger in Heidelberg, Germany, April 24--27, 1994, substantial progress was recorded on extension and refinement of the physical map, on the integration of genetic and cytogenetic data, on attempts to use the map to direct gene searches, and on nascent large-scale sequencing efforts. This report summarizes physical and genetic mapping information presented at the workshop and/or published since the reports of the fourth International X Chromosome Workshop. The principle aim of the workshop was to derive a consensus map of the chromosome, in terms of physical contigs emphasizing the location of genes and microsatellite markers. The resulting map is presented and updates previous versions. This report also updates the list of highly informative microsatellites. The text highlights the working state of the map, the genes known to reside on the X, and the progress toward integration of various types of data.

Industrial workshop on LASL semiconductor radiation-detector research and development

International Nuclear Information System (INIS)

Endebrock, M.

1978-11-01

An Industrial Workshop on LASL Semiconductor Radiation Detector Research and Development was held at the Los Alamos Scientific Laboratory (LASL) in the spring of 1977. The purpose was to initiate communication between our detector research and development program and industry. LASL research programs were discussed with special emphasis on detector problems. Industrial needs and capabilities in detector research and development were also presented. Questions of technology transfer were addressed. The notes presented here are meant to be informal, as were the presentations

IT Strategic Planning Workshops Develop Long-Term Goals | Poster

Science.gov (United States)

As part of NCI’s Research IT Strategic Planning efforts, a workshop was held on the NIH main campus in June. The main purpose of the workshop was to discuss ways to better integrate IT and informatics throughout NCI, and develop specific, high-level goals and related objectives that will drive the direction of IT and informatics support over the next five years. The initiative to integrate NCI’s IT and informatics is a collaboration between the Center for Biomedical Informatics and Information Technology (CBIIT), Office of Scientific Operations, Data Management Services, and the IT Operations Group.

Where Do Soldiers Really Come From? A Faculty Development Workshop on Veteran-Centered Care.

Science.gov (United States)

Lypson, Monica L; Ross, Paula T; Zimmerman, Natalie; Goldrath, Kathryn E; Ravindranath, Divy

2016-10-01

Addressing the medical concerns of veterans in both civilian health care systems and the Veterans Affairs (VA) health care system, where staff are familiar with issues of military reintegration, remains difficult but is increasingly important. In 2013, the authors developed and implemented a faculty development workshop for practicing clinicians using the documentary Where Soldiers Come From. The workshop included topics on unconscious bias, the service member trajectory, health care disparities, and strategies for overcoming barriers to treating veterans with posttraumatic stress disorder and traumatic brain injury. The workshop engaged faculty in the following active-learning techniques: images in education; trigger video; critical thinking and reflective writing; think-pair-share; and large-group discussion. The workshop has been conducted at three locations with 46 health care professionals. Thirty-one of 37 (84%) participants who completed the workshop evaluation were VA employees. The evaluation results show 25/32 (78.1%) participants indicated the workshop activities changed their knowledge, attitudes, and/or skills; 22/34 (64.7%) stated they had a better understanding of how to develop a care plan for veterans; and 27/34 (79.4%) stated they gained a better understanding of how to prepare for issues around returning veterans. To address the issue of veteran-centered care education more broadly, the authors have developed a massive open online course for health professionals, using most of the content from this workshop, which will be offered in spring 2016. Another important next step will be to deliver this workshop to and collect evaluation data from non-VA providers.

Proceedings of the international workshop on aged and decommissioned material collection and testing for structural integrity purposes

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-07-01

This workshop was sponsored by the CEC DG XI and XII/JRC Petten/AMES and by the Principal Working Group 3 (PWG-3) on reactor component integrity of the NEA CSNI, and it was hosted by the CEN Mol, Belgium. The activities of PWG-3 fall into three main areas: non-destructive examination (NDE), fracture analysis, and ageing/materials degradation. The topic of the workshop falls into the third area of ageing and materials degradation. The titles of the papers are: AMES and other European networks in Integrity of Ageing Structures; Over View of Proving Test on the Reliability of Material of Nuclear Power Plant Components; Activities on Ageing Degradation Phenomena of NPP in Korea; Capability of Investigation on Decommissioned Parts from NPPs at the MPA Stuttgart; How Accurately can Surveillance Specimens Reflect the True State of RPV Materials?; Applicability of Design Codes to Aged Materials; Microstructural Investigations of as-Fabricated, Long-Term Thermally Aged and Neutron Irradiated RPV Materials: An Atom Probe Study; Proposed Post-Service Investigations on Decommissioned Greifswald Units; Tools and Experience in Post Irradiation Examination of Structural Core Components at PSI Hot laboratory; Testing of Beznau NPP Unit 1 Steam Generator Cast Stainless Steel Elbows; Mechanical Properties Characterisation of Irradiated Materials From Operating or Decommissioned Nuclear Power Plants; Long Term Ageing of Cast Ti-Stabilised Stainless Steel; Enhanced Surveillance of Nuclear Reactor Pressure Vessels. Discussions and conclusions are also presented

Nuclear fuel rod grip with modified diagonal spring structures

International Nuclear Information System (INIS)

DeMario, E.E.

1990-01-01

This patent describes a spring structure in a nuclear fuel rod grid including a plurality of inner and outer straps being interleaved with one another to form a matrix of hollow cells. Each of the cells is for receiving one fuel rod and being defined by pairs of opposing wall sections of the straps which wall sections are shared with adjacent cells. Each of the cells has a central longitudinal axis, a fuel rod engaging spring structure of resiliently yieldable material being integrally formed on each wall section of the inner straps. The spring structure comprising: a pair of spaced apart opposite outer portions being integrally attached at their outer ends to the respective wall section. The portions extending in alignment with one another and in generally diagonal relation to the direction of the central longitudinal axis of the one cell; and a middle portion disposed between and integrally connected at its outer ends with respective inner ends of the outer portions. The middle portion extending in generally transverse relation to the direction of the central longitudinal axis of the one cell

18th International Workshop on Radiation Imaging Detectors

CERN Document Server

2016-01-01

The International Workshops on Radiation Imaging Detectors are held yearly and provide an international forum for discussing current research and developments in the area of position sensitive detectors for radiation imaging, including semiconductor detectors, gas and scintillator-based detectors. Topics include processing and characterization of detector materials, hybridization and interconnect technologies, design of counting or integrating electronics, readout and data acquisition systems, and applications in various scientific and industrial fields. The workshop will have plenary sessions with invited and contributed papers presented orally and in poster sessions. The invited talks will be chosen to review recent advances in different areas covered in the workshop.

Demystifying the peer-review process - workshop

Science.gov (United States)

Scientific writing and peer-review are integral parts of the publishing process. This workshop aims to demystify the peer-review process for early career scientists and provide insightful tips for streamlining the submission and peer review process for all researchers. Providing ...

Proceedings of RIKEN BNL Research Center workshop on RHIC spin

International Nuclear Information System (INIS)

Soffer, J.

1999-01-01

This RHIC Spin Workshop is the 1999 annual meeting of the RHIC Spin Collaboration, and the second to be hosted at Brookhaven and sponsored by the RIKEN BNL Research Center. The previous meetings were at Brookhaven (1998), Marseille (1996), MIT in 1995, Argonne 1994, Tucson in 1991, and the Polarized Collider Workshop at Penn State in 1990. As noted last year, the Center provides a home for combined work on spin by theorists, experimenters, and accelerator physicists. This proceedings, as last year, is a compilation of 1 page summaries and 5 selected transparencies for each speaker. It is designed to be available soon after the workshop is completed. Speakers are welcome to include web or other references for additional material. The RHIC spin program and RHIC are rapidly becoming reality. RHIC has completed its first commissioning run, as described here by Steve Peggs. The first Siberian Snake for spin has been completed and is being installed in RHIC. A new polarized source from KEK and Triumf with over 1 milliampere of polarized H minus is being installed, described by Anatoli Zelenski. They have had a successful test of a new polarimeter for RHIC, described by Kazu Kurita and Haixin Huang. Spin commissioning is expected next spring (2000), and the first physics run for spin is anticipated for spring 2001. The purpose of the workshop is to get everyone together about once per year and discuss goals of the spin program, progress, problems, and new ideas. They also have many separate regular forums on spin. There are spin discussion sessions every Tuesday, now organized by Naohito Saito and Werner Vogelsang. The spin discussion schedule and copies of presentations are posted on http://riksg01.rhic.bnl.gov/rsc. Speakers and other spinners are encouraged to come to BNL and to lead a discussion on your favorite idea. They also have regular polarimeter and snake meetings on alternate Thursdays, led by Bill McGahern, the lead engineer for the accelerator spin effort

Data And Informatics Working Group On Virtual Data Integration Workshop Report

Energy Technology Data Exchange (ETDEWEB)

Williams, D. N. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Palanisamy, G. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Dam, K. K. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2015-10-13

This report is the outcome of a workshop that was commissioned by the Department of Energy’s Climate and Environmental Sciences Division (CESD) to examine current and future data infrastructure requirements that would be foundational to achieving CESD’s scientific mission goals. Over the past several years, data volumes in CESD disciplines have risen sharply to unprecedented levels (tens of petabytes). So too has the complexity and diversity of the research data (simulation, observation, and reanalysis) needing to be captured, stored, verified, analyzed, and integrated. With the trends of increased data volume (in the hundreds of petabytes), more complex analysis processes, and growing crossdisciplinary collaborations, it is timely to investigate whether the CESD community has the right computational and data support to realize the full scientific potential from its data collections. In recognition of the challenges, a partnership is forming across CESD and with national and international agencies to investigate the viability of creating an integrated, collaborative data infrastructure: a virtual laboratory. The overarching goal of this report is to identify the community’s key data technology requirements and high-priority development needs for sustaining and growing their scientific discovery potential. The report also aims to map these requirements to existing solutions and to identify gaps in current services, tools, and infrastructure that will need to be addressed in the short, medium, and long term so as not to impede scientific progress

Design of workshops in air quality management for senior managers in Mexico (Taller de la calidad del aire para mandos superiores)

Energy Technology Data Exchange (ETDEWEB)

Auberle, W.M.; Alvarez, V.M.; Leary, J.; Paramo, V.H.

1999-07-01

A collaborative program among agencies and professionals in Mexico and the US is designing, developing and delivering specialized workshops for Mexican officials responsible for air quality management. The initial project is development and pilot delivery (Spring 1999) of a workshop for senior officials of SEMARNAP plus selected state and municipal officials. This paper describes the process for design of professional development programs in air quality management for Mexican officials. Key issues include optimum learning styles and delivery techniques; available time of senior managers for education; need for new materials versus adaptation of existing air quality management information; and utilization of the Internet and asynchronous methods to supplement the traditional workshop format. The paper describes the results of this analysis and design features and content of the initial workshop.

IT Strategic Planning Workshops Develop Long-Term Goals | Poster

Science.gov (United States)

As part of NCI’s Research IT Strategic Planning efforts, a workshop was held on the NIH main campus in June. The main purpose of the workshop was to discuss ways to better integrate IT and informatics throughout NCI, and develop specific, high-level goals and related objectives that will drive the direction of IT and informatics support over the next five years. The initiative

Applying spatial analysis techniques to assess the suitability of multipurpose uses of spring water in the Jiaosi Hot Spring Region, Taiwan

Science.gov (United States)

Jang, Cheng-Shin

2016-04-01

for the multipurpose uses of spring water is proposed according to the integration of the land use and spring water temperatures. The study results indicate that OK, SGS, and GIS are capable of characterizing spring water temperatures and the suitability of multipurpose uses of spring water. SGS realizations are more robust than OK estimates for characterizing spring water temperatures. Furthermore, current land use is almost ideal in the Jiaosi Hot Spring Region according to the estimated spatial pattern of spring water temperatures. Keywords: Hot spring; Temperature; Land use; Ordinary kriging; Sequential Gaussian simulation; Geographical information system

Report of the Fourth international workshop on human chromosome 18 mapping 1996

International Nuclear Information System (INIS)

Silverman, G.A.; Overhauser, J.; Gerken, S.; Aburomia, R.; O'Connell, P.; Krauter, K.S.; Detera-Wadleigh, S.D.; Yoshikawa, T.; Collins, A.R.; Geurts van Kessel, A.

1996-01-01

The fourth international workshop on human chromosome 18 mapping was held in Boston, Massachusetts, USA on October 7-9, 1996. The workshop was attended by 34 participants from 7 countries. The goals of the workshop were to (1) generate integrated genetic and physical maps, (2) update the transcriptional map, (3) assess the syntenic relationships between human chromosome 18 and the mouse genome, and (4) establish a chromosome 18 web site

Final report: 'Rhodopseudomonas palustris' genome workshop to be held in Spring of 2001; FINAL

International Nuclear Information System (INIS)

Harwood, Caroline S.

2002-01-01

The 'Rhodopseudomonas palustris' genome workshop took place in Iowa City on April 6-8, 2001. The purpose of the meeting was to instruct members of the annotation working group in approaches to accomplishing the 'human' phase of the 'R. palustris' genome annotation. A partial draft of a paper describing the 'Rhodopseudomonas palustris' genome has been written and a full version of the paper should be ready for submission by the end of the summer 2002

Integrating viscoelastic mass spring dampers into position-based dynamics to simulate soft tissue deformation in real time.

Science.gov (United States)

Xu, Lang; Lu, Yuhua; Liu, Qian

2018-02-01

We propose a novel method to simulate soft tissue deformation for virtual surgery applications. The method considers the mechanical properties of soft tissue, such as its viscoelasticity, nonlinearity and incompressibility; its speed, stability and accuracy also meet the requirements for a surgery simulator. Modifying the traditional equation for mass spring dampers (MSD) introduces nonlinearity and viscoelasticity into the calculation of elastic force. Then, the elastic force is used in the constraint projection step for naturally reducing constraint potential. The node position is enforced by the combined spring force and constraint conservative force through Newton's second law. We conduct a comparison study of conventional MSD and position-based dynamics for our new integrating method. Our approach enables stable, fast and large step simulation by freely controlling visual effects based on nonlinearity, viscoelasticity and incompressibility. We implement a laparoscopic cholecystectomy simulator to demonstrate the practicality of our method, in which liver and gallbladder deformation can be simulated in real time. Our method is an appropriate choice for the development of real-time virtual surgery applications.

Results from the Savannah River Laboratory model validation workshop

International Nuclear Information System (INIS)

Pepper, D.W.

1981-01-01

To evaluate existing and newly developed air pollution models used in DOE-funded laboratories, the Savannah River Laboratory sponsored a model validation workshop. The workshop used Kr-85 measurements and meteorology data obtained at SRL during 1975 to 1977. Individual laboratories used models to calculate daily, weekly, monthly or annual test periods. Cumulative integrated air concentrations were reported at each grid point and at each of the eight sampler locations

APS-Workshop on Characterization of MMIC (Monolithic Microwave Integrated Circuit) Devices for Array Antenna

Science.gov (United States)

Smetana, Jerry (Editor); Mittra, Raj (Editor); Laprade, Nick; Edward, Bryan; Zaghloul, Amir

1987-01-01

The IEEE AP-S ADCOM is attempting to expand its educational, tutorial and information exchange activities as a further benefit to all members. To this end, ADCOM will be forming specialized workshops on topics of interest to its members. The first such workshop on Characterization and Packaging of MMIC Devices for Array Antennas was conceived. The workshop took place on June 13, 1986 as part of the 1986 International Symposium sponsored by IEEE AP-S and URSI in Philadelphia, PA, June 9-13, 1986. The workshop was formed to foster the interchange of ideas among MMIC device users and to provide a forum to collect and focus information among engineers experienced and interested in the topic. After brief presentations by the panelists and comments from attendees on several subtopics, the group was divided into working committees. Each committee evaluated and made recommendations on one of the subtopics.

75 FR 33613 - Notice of Interviews, Teleconferences, Regional Workshops and Multi-Stakeholder Technical...

Science.gov (United States)

2010-06-14

..., Regional Workshops and Multi-Stakeholder Technical Conference on the Integrated Licensing Process June 7... conducting interviews and teleconferences with a cross-section of stakeholders, four regional workshops, and a multi- stakeholder effectiveness technical conference in Washington, DC. To facilitate this review...

Fifth national stakeholder workshop summary report

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-12-31

On April 9--11, 1997, the Department of Energy`s Office of Worker and Community Transition convened its fifth National Stakeholder Workshop. The workshop addressed a wide range of work force restructuring and community transition issues critical to the future success of the Department. Two important elements of the meeting were: (1) reviewing progress made on the challenges identified during the March 1996f stakeholder`s meeting in Atlanta, Georgia; and (2) identifying areas that needed priority attention during the early months of the second Clinton Administration. The format of the Workshop included several plenary sessions and a number of small group discussion sessions. The small group sessions focused on topics related to labor issues, work force restructuring, work force planning, community transition, and employee concerns. The sessions provided a wide range of views on worker and community transition issues. The workshop included presentations on the following topics: Welcome and introductions; Opening remarks; Community reuse organizations: recent accomplishments; Privatization: policy, practice and potential pitfalls; Department of Energy`s integrated training initiatives; Congressional perspective on work force restructuring; and, Privatization and the Ten Year Plan.

Proceedings of the NATO IST-128 Workshop: Assessing Mission Impact of Cyberattacks Held in Istanbul, Turkey on 15-17 June 2015

Science.gov (United States)

2015-12-01

the NATO IST-128 Workshop: Assessing Mission Impact of Cyberattacks 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6...2001. [7] John Surdu, Kevin Kittka, “The Deep Green Concept,” Spring Simulation Multiconference, 2008. [8] Lieutenant General Edward Cardon

The Implementation of a One-Day Science, Technology, Engineering and Mathematics (STEM) Career Exploration Workshop for Middle School Girls in Elmira, New York

Science.gov (United States)

Turner, Carol-Witkowski CW

Even now, women are underrepresented in Science, Technology, Engineering, and Mathematics (STEM) careers. The literature shows that one significant approach to address this issue is to work with middle school girls, ages eleven to thirteen, to get them interested and excited about STEM career paths. In addition to appropriate in-school support a review of many different middle school programs indicates that such programs exist in certain service areas but are still missing in others, especially the rural areas. To address this situation, a one-day STEM workshop called "Full STEAHM Ahead!" was implemented spring 2012 in Elmira, New York, to address the career exploration "turning point" for rural middle school girls. The implementation involved pre-workshop, workshop, and post-workshop phases. The success and effectiveness of the workshop was demonstrated by survey comments and verbal feedback from both the girls and educators who attended.

77 FR 31371 - Public Workshop: Privacy Compliance Workshop

Science.gov (United States)

2012-05-25

... presentations, including the privacy compliance fundamentals, privacy and data security, and the privacy... DEPARTMENT OF HOMELAND SECURITY Office of the Secretary Public Workshop: Privacy Compliance... Homeland Security Privacy Office will host a public workshop, ``Privacy Compliance Workshop.'' DATES: The...

Linear magnetic spring and spring/motor combination

Science.gov (United States)

Patt, Paul J. (Inventor); Stolfi, Fred R. (Inventor)

1991-01-01

A magnetic spring, or a spring and motor combination, providing a linear spring force characteristic in each direction from a neutral position, in which the spring action may occur for any desired coordinate of a typical orthogonal coordinate system. A set of magnets are disposed, preferably symmetrically about a coordinate axis, poled orthogonally to the desired force direction. A second set of magnets, respectively poled opposite the first set, are arranged on the sprung article. The magnets of one of the sets are spaced a greater distance apart than those of the other, such that an end magnet from each set forms a pair having preferably planar faces parallel to the direction of spring force, the faces being offset so that in a neutral position the outer edge of the closer spaced magnet set is aligned with the inner edge of the greater spaced magnet set. For use as a motor, a coil can be arranged with conductors orthogonal to both the magnet pole directions and the direction of desired spring force, located across from the magnets of one set and fixed with respect to the magnets of the other set. In a cylindrical coordinate system having axial spring force, the magnets are radially poled and motor coils are concentric with the cylinder axis.

Workshop summary: 'Integrating air quality and climate mitigation - is there a need for new metrics to support decision making?'

Science.gov (United States)

von Schneidemesser, E.; Schmale, J.; Van Aardenne, J.

2013-12-01

Air pollution and climate change are often treated at national and international level as separate problems under different regulatory or thematic frameworks and different policy departments. With air pollution and climate change being strongly linked with regard to their causes, effects and mitigation options, the integration of policies that steer air pollutant and greenhouse gas emission reductions might result in cost-efficient, more effective and thus more sustainable tackling of the two problems. To support informed decision making and to work towards an integrated air quality and climate change mitigation policy requires the identification, quantification and communication of present-day and potential future co-benefits and trade-offs. The identification of co-benefits and trade-offs requires the application of appropriate metrics that are well rooted in science, easy to understand and reflect the needs of policy, industry and the public for informed decision making. For the purpose of this workshop, metrics were loosely defined as a quantified measure of effect or impact used to inform decision-making and to evaluate mitigation measures. The workshop held on October 9 and 10 and co-organized between the European Environment Agency and the Institute for Advanced Sustainability Studies brought together representatives from science, policy, NGOs, and industry to discuss whether current available metrics are 'fit for purpose' or whether there is a need to develop alternative metrics or reassess the way current metrics are used and communicated. Based on the workshop outcome the presentation will (a) summarize the informational needs and current application of metrics by the end-users, who, depending on their field and area of operation might require health, policy, and/or economically relevant parameters at different scales, (b) provide an overview of the state of the science of currently used and newly developed metrics, and the scientific validity of these

The 1995 Science Information Management and Data Compression Workshop

Science.gov (United States)

Tilton, James C. (Editor)

1995-01-01

This document is the proceedings from the 'Science Information Management and Data Compression Workshop,' which was held on October 26-27, 1995, at the NASA Goddard Space Flight Center, Greenbelt, Maryland. The Workshop explored promising computational approaches for handling the collection, ingestion, archival, and retrieval of large quantities of data in future Earth and space science missions. It consisted of fourteen presentations covering a range of information management and data compression approaches that are being or have been integrated into actual or prototypical Earth or space science data information systems, or that hold promise for such an application. The Workshop was organized by James C. Tilton and Robert F. Cromp of the NASA Goddard Space Flight Center.

The Affording Mars Workshop: Background and Recommendations

Science.gov (United States)

Thronson, Harley A.; Carberry, Christopher

2014-01-01

A human mission to Mars is the stated "ultimate" goal for NASA and is widely believed by the public to be the most compelling destination for America's space program. However, widely cited enormous costs - perhaps as much as a trillion dollars for a many-decade campaign - seem to be an impossible hurdle, although political and budget instability over many years may be equally challenging. More recently, a handful of increasingly detailed architectures for initial Mars missions have been developed by commercial companies that have estimated costs much less than widely believed and roughly comparable with previous major human space flight programs: the Apollo Program, the International Space Station, and the space shuttle. Several of these studies are listed in the bibliography to the workshop report. As a consequence of these new scenarios, beginning in spring, 2013 a multiinstitutional planning team began developing the content and invitee list for a winter workshop that would critically assess concepts, initiatives, technology priorities, and programmatic options to reduce significantly the costs of human exploration of Mars. The output of the workshop - findings and recommendations - would be presented in a number of forums and discussed with national leaders in human space flight. It would also be made available to potential international partners. This workshop was planned from the start to be the first in a series. Subsequent meetings, conferences, and symposia will concentrate on topics not able to be covered in December. In addition, to make progress in short meeting, a handful of ground rules were adopted by the planning team and agreed to by the participants. Perhaps the two most notable such ground rules were (1) the Space Launch System (SLS) and Orion would be available during the time frame considered by the participants and (2) the International Space Station (ISS) would remain the early linchpin in preparing for Mars exploration over the coming decade

Workshop on Current Issues in Predictive Approaches to Intelligence and Security Analytics: Fostering the Creation of Decision Advantage through Model Integration and Evaluation

Energy Technology Data Exchange (ETDEWEB)

Sanfilippo, Antonio P.

2010-05-23

The increasing asymmetric nature of threats to the security, health and sustainable growth of our society requires that anticipatory reasoning become an everyday activity. Currently, the use of anticipatory reasoning is hindered by the lack of systematic methods for combining knowledge- and evidence-based models, integrating modeling algorithms, and assessing model validity, accuracy and utility. The workshop addresses these gaps with the intent of fostering the creation of a community of interest on model integration and evaluation that may serve as an aggregation point for existing efforts and a launch pad for new approaches.

Workshops som forskningsmetode

OpenAIRE

Ørngreen, Rikke; Levinsen, Karin Tweddell

2017-01-01

This paper contributes to knowledge on workshops as a research methodology, and specifically on how such workshops pertain to e-learning. A literature review illustrated that workshops are discussed according to three different perspectives: workshops as a means, workshops as practice, and workshops as a research methodology. Focusing primarily on the latter, this paper presents five studies on upper secondary and higher education teachers’ professional development and on teaching and learnin...

Proceedings of the Third CSNI Workshop on Iodine Chemistry in Reactor Safety

International Nuclear Information System (INIS)

Ishigure, K.; Saeki, M.; Soda, K.; Sugimoto, J.

1992-03-01

The Third CSNI Workshop on Iodine Chemistry in Reactor Safety was held at Tokai Research Establishment of Japan Atomic Energy Research Institute at Tokai-mura, Ibaraki-ken, Japan, on September 11 to 13, 1991. About 60 experts attended the Workshop from 10 countries and 2 international organizations. In the Workshop, 29 papers were presented in five sessions on various aspects of iodine chemistry in reactor safety, such as radiolytic and surface reactions of iodine species, fundamental and integral tests, modeling and code developments. The information exchanged and the discussions followed resulted in extended and promoted understanding of iodine behavior in accidents of light water reactors and also gave a large expectation for the further progresses coming in the future. It should be emphasized that a most important and unique forum has been established through the Workshop for exchanging information and collaboratively solving the important problems in the field of the iodine chemistry in nuclear reactor safety. At the Workshop, an effort was made to integrate all information for better use by safety analysts. There is no doubt that a lot of information on iodine behaviour has been accumulated, but in many cases this information needs to be co-ordinated and well organised for safety analyses of nuclear reactors. It is essential that the results of laboratory studies and integral experiments together with modelling activities are well co-ordinated. Therefore, the goal was: - to review the knowledge and understanding of the chemistry of iodine of relevance to the prediction of its behaviour in nuclear reactors during a range of operational and accident conditions; - to define those areas of chemistry which are important but poorly understood and require further study. As shown by the conclusions of the Workshop, there is no doubt that this objective was widely attained

Proceedings from Workshop on System Studies of Integrated Solid Waste Management

Energy Technology Data Exchange (ETDEWEB)

Sundqvist, Jan-Olov (ed.) [Swedish Environmental Research Institute, Stockholm (Sweden); Finnveden, Goeran (ed.) [Stockholm Univ. and Swedish Defence Research Agency, Stockholm (Sweden). Environmental Strategies Research Group; Sundberg, Johan (ed.) [Chalmers Univ. of Technology, Goeteborg (Sweden). Div. of Energy Systems Technology

2002-12-01

This international workshop was held to discuss results and experience from system studies of waste management system and methodological questions and issues based on case studies. The workshop gathered more than 40 participants. These proceedings document more than 20 presentations as well as six discussion sessions. An overall aim of the workshop was to draw some general conclusions from the presented studies concerning - waste strategies that generally seem to be favourable or not favourable - methodological approaches and assumptions that can govern the results - lack of knowledge. Considering the environmental aspects, the presented studies indicated that the waste hierarchy seems to be valid: - Paper and plastic: Material recycling < Incineration < Landfilling - Biodegradable waste: Incineration {approx} Anaerobic digestion < Composting < Landfilling. A number of key aspects that can influence the results were identified: - Avoided products (heat, electricity, material, fertiliser produced from waste). - Efficiency in power plants, heating plants etc. and also recycling plants. - Emissions and impacts from recycling plants - Landfilling models, e.g. time frames. - Final sinks: there should be a distinction between temporary sinks (landfills) and final sinks - Local conditions and local impacts are often neglected. - Electricity production - Choice of alternatives to compare can have an influence on the conclusions drawn. - Stakeholders influence. - Linear modelling. - Data gaps. Especially data on toxic substances where identified as an important data gap.

77 FR 26511 - Announcing a National Cybersecurity Center of Excellence (NCCoE) Workshop

Science.gov (United States)

2012-05-04

... Cybersecurity Center of Excellence (NCCoE) Workshop AGENCY: National Institute of Standards and Technology (NIST... Cybersecurity Center of Excellence (NCCoE) Workshop to be held on Tuesday, June 26, 2012. This is an initial... accelerating the widespread adoption of integrated cybersecurity tools and technologies. The NCCoE will bring...

Workshop report on new directions in soft x-ray photoabsorption

International Nuclear Information System (INIS)

Bartlett, R.; Del Grande, N.K.; Lindau, I.; Manson, S.; Merts, A.L.; Pratt, R.

1984-01-01

The Workshop Report integrates what was said at the Workshop on New Directions in Soft X-Ray Photoabsorption, which focused on the region from 100 eV to 10 keV. The report clarifies the current state of theory and experiment and identifies the opportunities which new theoretical methods and experimental facilities could be expected to provide. The understanding of photoabsorption (which requires experimental photoabsorption cross section data) is a key to understanding the properties and behavior of atoms, molecules and solids. The Workshop participants were forty-three physicists and quantum chemists, from twenty-four institutions in four countries, all interested in photoabsorption from different perspectives

HTTR workshop (workshop on hydrogen production technology)

International Nuclear Information System (INIS)

Shiina, Yasuaki; Takizuka, Takakazu

2004-12-01

Various research and development efforts have been performed to solve the global energy and environmental problems caused by large consumption of fossil fuels. Research activities on advanced hydrogen production technology by the use of nuclear heat from high temperature gas cooled reactors, for example, have been flourished in universities, research institutes and companies in many countries. The Department of HTTR Project and the Department of Advanced Nuclear Heat Technology of JAERI held the HTTR Workshop (Workshop on Hydrogen Production Technology) on July 5 and 6, 2004 to grasp the present status of R and D about the technology of HTGR and the nuclear hydrogen production in the world and to discuss about necessity of the nuclear hydrogen production and technical problems for the future development of the technology. More than 110 participants attended the Workshop including foreign participants from USA, France, Korea, Germany, Canada and United Kingdom. In the Workshop, the presentations were made on such topics as R and D programs for nuclear energy and hydrogen production technologies by thermo-chemical or other processes. Also, the possibility of the nuclear hydrogen production in the future society was discussed. The workshop showed that the R and D for the hydrogen production by the thermo-chemical process has been performed in many countries. The workshop affirmed that nuclear hydrogen production could be one of the competitive supplier of hydrogen in the future. The second HTTR Workshop will be held in the autumn next year. (author)

Stress corrosion cracking lifetime prediction of spring screw

International Nuclear Information System (INIS)

Koh, S. K.; Ryu, C. H.

2004-01-01

A lifetime prediction of holddown spring screw in nuclear fuel assembly was performed using fracture mechanics approach. The spring screw was designed such that it was capable of sustaining the loads imposed by the initial tensile preload and operational loads. In order to investigate the cause of failure and to predict the stress corrosion cracking life of the screw, a stress analysis of the top nozzle spring assembly was done using finite element analysis. The elastic-plastic finite element analysis showed that the local stresses at the critical regions of head-shank fillet and thread root significantly exceeded than the yield strength of the screw material, resulting in local plastic deformation. Normalized stress intensity factors for PWSCC life prediction was proposed. Primary water stress corrosion cracking life of the Inconel 600 screw was predicted by using integration of the Scott model and resulted in 1.78 years, which was fairly close to the actual service life of the holddown spring screw

Groundwater flow cycling between a submarine spring and an inland fresh water spring.

Science.gov (United States)

Davis, J Hal; Verdi, Richard

2014-01-01

Spring Creek Springs and Wakulla Springs are large first magnitude springs that derive water from the Upper Floridan Aquifer. The submarine Spring Creek Springs are located in a marine estuary and Wakulla Springs are located 18 km inland. Wakulla Springs has had a consistent increase in flow from the 1930s to the present. This increase is probably due to the rising sea level, which puts additional pressure head on the submarine Spring Creek Springs, reducing its fresh water flow and increasing flows in Wakulla Springs. To improve understanding of the complex relations between these springs, flow and salinity data were collected from June 25, 2007 to June 30, 2010. The flow in Spring Creek Springs was most sensitive to rainfall and salt water intrusion, and the flow in Wakulla Springs was most sensitive to rainfall and the flow in Spring Creek Springs. Flows from the springs were found to be connected, and composed of three repeating phases in a karst spring flow cycle: Phase 1 occurred during low rainfall periods and was characterized by salt water backflow into the Spring Creek Springs caves. The higher density salt water blocked fresh water flow and resulted in a higher equivalent fresh water head in Spring Creek Springs than in Wakulla Springs. The blocked fresh water was diverted to Wakulla Springs, approximately doubling its flow. Phase 2 occurred when heavy rainfall resulted in temporarily high creek flows to nearby sinkholes that purged the salt water from the Spring Creek Springs caves. Phase 3 occurred after streams returned to base flow. The Spring Creek Springs caves retained a lower equivalent fresh water head than Wakulla Springs, causing them to flow large amounts of fresh water while Wakulla Springs flow was reduced by about half. Published 2013. This article is a U.S. Government work and is in the public domain in the USA.

Mapping of groundwater spring potential zone using geospatial ...

Indian Academy of Sciences (India)

9

geographical information system and remote sensing with various ... integration of RS and GIS and multi-criteria decision-making techniques, .... terrain factor contains the S (spring) before taking a class of terrain factor (F) into account and its.

Mental health workshops delivered by medical students in Cambridge secondary schools: an evaluation of learning.

Science.gov (United States)

Bentham, Chloe; Daunt, Anna; Taylor, Stephanie; Simmons, Meinou

2013-09-01

For a group of medical students to design and deliver a mental health workshop in Cambridge secondary schools. Subsequently, to evaluate any improvements in pupils' knowledge of mental health issues, including knowledge of common mental illnesses, stigma and where to access help with mental health problems. A group of three medical students undertook a five week Student Selected Component to develop a mental health workshop in Spring 2013. The workshop was designed to include interactive components, such as role play, models and video. It was delivered to eight classes of 12-13 year old pupils across two local secondary schools, a total of 230 students. Questionnaires were completed before and after each workshop to test knowledge acquisition of mental health issues, stigma and where pupils could get help with mental health problems. Comparisons between data from the pre- and post-workshop questionnaires were made to assess learning. The responses from the questionnaires showed a global improvement in knowledge of mental health. This is highlighted by the increase in awareness of the prevalence of mental health problems amongst young people from 47.0% before the workshops to 97.8% after the workshops. The ability to identify symptoms of anxiety rose from 21.7% to 44.8% and the ability to identify depression rose from 29.0% to 53.5% respectively. Whilst only 15.2% pupils disagreed with a stigmatising statement about mental illness before the workshops, 61.3% pupils disagreed afterwards. The students were also better informed about how to access help and identified areas that they found useful to learn about. Comparison of the pre- and post-workshop questionnaires indicate that medical student-led workshops are an effective method for improving knowledge of mental health topics amongst 12-13 year old school pupils, as well as encouraging positive attitudes towards mental health. The project highlights a demand for mental health education in schools and brings to

Can empathy be taught? Reflections from a medical student active-listening workshop.

Science.gov (United States)

Karp, Lianna

2015-06-01

Medical students deserve training in active listening and counseling before they encounter patients in distress. At the Alpert Medical School of Brown University we created and evaluated a workshop that trains first-year medical students to assess patients' emotional states and express empathy in an efficient and effective manner. Using second-year students as near-peer facilitators, we integrated the workshop into the existing preclinical first-year curriculum. We found that students' self-reported comfort in counseling a patient experiencing an emotionally challenging situation increased from 27% to 79% after the 90-minute workshop.

NASA-LaRc Flight-Critical Digital Systems Technology Workshop

Science.gov (United States)

Meissner, C. W., Jr. (Editor); Dunham, J. R. (Editor); Crim, G. (Editor)

1989-01-01

The outcome is documented of a Flight-Critical Digital Systems Technology Workshop held at NASA-Langley December 13 to 15 1988. The purpose of the workshop was to elicit the aerospace industry's view of the issues which must be addressed for the practical realization of flight-critical digital systems. The workshop was divided into three parts: an overview session; three half-day meetings of seven working groups addressing aeronautical and space requirements, system design for validation, failure modes, system modeling, reliable software, and flight test; and a half-day summary of the research issues presented by the working group chairmen. Issues that generated the most consensus across the workshop were: (1) the lack of effective design and validation methods with support tools to enable engineering of highly-integrated, flight-critical digital systems, and (2) the lack of high quality laboratory and field data on system failures especially due to electromagnetic environment (EME).

Proceedings of the Special Demonstration Workshop for Integrating Blind Children with Sighted Children into Ongoing Physical Education and Recreation Programs (Cleveland, Ohio, October 9-10, 1969).

Science.gov (United States)

Boninger, Walter B., Ed.

A special education workshop (Cleveland, Ohio, October 9-10, 1969) for integrating blind children with sighted children into ongoing physical education and recreation programs is described. Physical education and blind children from the viewpoint of opthalmology, social and psychological aspects of blindness as they relate to participation in…

Spring Tire

Science.gov (United States)

Asnani, Vivake M.; Benzing, Jim; Kish, Jim C.

2011-01-01

The spring tire is made from helical springs, requires no air or rubber, and consumes nearly zero energy. The tire design provides greater traction in sandy and/or rocky soil, can operate in microgravity and under harsh conditions (vastly varying temperatures), and is non-pneumatic. Like any tire, the spring tire is approximately a toroidal-shaped object intended to be mounted on a transportation wheel. Its basic function is also similar to a traditional tire, in that the spring tire contours to the surface on which it is driven to facilitate traction, and to reduce the transmission of vibration to the vehicle. The essential difference between other tires and the spring tire is the use of helical springs to support and/or distribute load. They are coiled wires that deform elastically under load with little energy loss.

An appraisal of the geologic structure beneath the Ikogosi warm spring in south-western Nigeria using integrated surface geophysical methods

Directory of Open Access Journals (Sweden)

J.S Ojo

2011-06-01

Full Text Available An integrated surface geophysical investigation involving resistivity and magnetic methods was carried out in the immediate vicinity of the Ikogosi warm spring situated in south-western Nigeria with a view to delineating its subsurface geological sequence and evaluating the structural setting beneath the warmspring. Total field magnetic measurements and vertical electrical sounding (VES data were acquired along five N-S traverses. Magnetic and VES data interpretation
involved inverse modelling. The inverse magnetic models delineated fractured quartzite/faulted areas within fresh massive quartzite at varying depths and beneath all traverses. The geoelectrical sections developed from VESinterpretation results also delineated a subsurface sequence consisting of a topsoil/weathered layer, fresh quartzite, fractured/faulted quartzite and fresh quartzite bedrock. It was deduced that the fractured/faulted quartzite may have acted as conduit for the
movement of warm groundwater from profound depths to the surface while the spring outlet was located on a geological interface  (lineament.

Proceedings of the 2010 renewable energy infrastructure workshop

International Nuclear Information System (INIS)

2010-01-01

This workshop provided a forum for electric power industry leaders and key stakeholders to discuss Canada's renewable energy infrastructure needs. The workshop was held to provide practical solutions for meeting the increased demand for renewable energy as well as to offer a range of marketplace options and funding opportunities. Participants in the workshop examined the regulatory framework of the Green Energy Act and its potential impact on organizations. Approval process procedures for renewable energy projects were reviewed, and methods of ensuring the integration of renewable energy projects with current business strategies were discussed. Communications strategies for managing the public perception of energy project were presented. Policy barriers to infrastructure development were outlined. Methods of developing partnerships with Aboriginal communities were also discussed. The conference featured 16 presentations, of which 3 have been catalogued separately for inclusion in this database. tabs., figs.

TARG2 Workshop - Slides of the presentations

International Nuclear Information System (INIS)

Malka, V.; Koehler, A.; Beaurepaire, B.; Krishnan, M.; Guillaume, E.; Chowdhury, E.; Volpe, L.; Nakatsutsumi, M.; Chatain, D.; Legare, F.; Wachulak, P.; Bocoum, M.; Leblanc, A.; Schreiber, J.; Ter-Avetisyan, S.; Zeil, K.; Fukuda, Y.; Levecq, X.; Svensson, K.; Mollica, F.; Brandi, F.; Ruiz, C.

2016-01-01

The topics tackled in this workshop involved: laser-plasma interaction, innovative targets from gases to solids, targetry recycling and debris management, mass fabrication of laser targets, high repetition rate capability, integrated plasma diagnostics, wakefield acceleration and radiation sources. This document is made up of the slides of the presentations

Quantum Testbeds Stakeholder Workshop (QTSW) Report meeting purpose and agenda.

Energy Technology Data Exchange (ETDEWEB)

Hebner, Gregory A.

2017-04-01

Quantum computing (QC) is a promising early-stage technology with the potential to provide scientific computing capabilities far beyond what is possible with even an Exascale computer in specific problems of relevance to the Office of Science. These include (but are not limited to) materials modeling, molecular dynamics, and quantum chromodynamics. However, commercial QC systems are not yet available and the technical maturity of current QC hardware, software, algorithms, and systems integration is woefully incomplete. Thus, there is a significant opportunity for DOE to define the technology building blocks, and solve the system integration issues to enable a revolutionary tool. Once realized, QC will have world changing impact on economic competitiveness, the scientific enterprise, and citizen well-being. Prior to this workshop, DOE / Office of Advanced Scientific Computing Research (ASCR) hosted a workshop in 2015 to explore QC scientific applications. The goal of that workshop was to assess the viability of QC technologies to meet the computational requirements in support of DOE’s science and energy mission and to identify the potential impact of these technologies.

Studying Springs in Series Using a Single Spring

Science.gov (United States)

Serna, Juan D.; Joshi, Amitabh

2011-01-01

Springs are used for a wide range of applications in physics and engineering. Possibly, one of their most common uses is to study the nature of restoring forces in oscillatory systems. While experiments that verify Hooke's law using springs are abundant in the physics literature, those that explore the combination of several springs together are…

6th International Workshop on Computer-Aided Scheduling of Public Transport

CERN Document Server

Branco, Isabel; Paixão, José

1995-01-01

This proceedings volume consists of papers presented at the Sixth International Workshop on Computer-Aided Scheduling of Public Transpon, which was held at the Fund~lio Calouste Gulbenkian in Lisbon from July 6th to 9th, 1993. In the tradition of alternating Workshops between North America and Europe - Chicago (1975), Leeds (1980), Montreal (1983), Hamburg (1987) and again Montreal (1990), the European city of Lisbon was selected as the venue for the Workshop in 1993. As in earlier Workshops, the central theme dealt with vehicle and duty scheduling problems and the employment of operations-research-based software systems for operational planning in public transport. However, as was initiated in Hamburg in 1987, the scope of this Workshop was broadened to include topics in related fields. This fundamental alteration was an inevitable consequence of the growing demand over the last decade for solutions to the complete planning process in public transport through integrated systems. Therefore, the program of thi...

News Quantum physics: German Physical Society spring meeting Journal access: American Physical Society's online journals will be available for free in all US high schools Award: High-school physics teacher receives American award for excellence Teacher training: Fobinet offers coordination of teacher-training activities Astronomy: Astronomy fans see stars at Astrofest Conference: Delegates enjoy the workshops and activities at CPD conference Forthcoming events

Science.gov (United States)

2011-05-01

Quantum physics: German Physical Society spring meeting Journal access: American Physical Society's online journals will be available for free in all US high schools Award: High-school physics teacher receives American award for excellence Teacher training: Fobinet offers coordination of teacher-training activities Astronomy: Astronomy fans see stars at Astrofest Conference: Delegates enjoy the workshops and activities at CPD conference Forthcoming events

Fossilization Processes in Thermal Springs

Science.gov (United States)

Farmer, Jack D.; Cady, Sherry; Desmarais, David J.; Chang, Sherwood (Technical Monitor)

1995-01-01

To create a comparative framework for the study of ancient examples, we have been carrying out parallel studies of the microbial biosedimentology, taphonomy and geochemistry of modem and sub-Recent thermal spring deposits. One goal of the research is the development of integrated litho- and taphofacies models for siliceous and travertline sinters. Thermal springs are regarded as important environments for the origin and early evolution of life on Earth, and we seek to utilize information from the fossil record to reconstruct the evolution of high temperature ecosystems. Microbial contributions to the fabric of thermal spring sinters occur when population growth rates keep pace with, or exceed rates of inorganic precipitation, allowing for the development of continuous biofilms or mats. In siliceous thermal springs, microorganisms are typically entombed while viable. Modes of preservation reflect the balance between rates of organic matter degradation, silica precipitation and secondary infilling. Subaerial sinters are initially quite porous and permeable and at temperatures higher than about 20 C, organic materials are usually degraded prior to secondary infilling of sinter frameworks. Thus, organically-preserved microfossils are rare and fossil information consists of characteristic biofabrics formed by the encrustation and underplating of microbial mat surfaces. This probably accounts for the typically low total organic carbon values observed in thermal spring deposits. In mid-temperature, (approx. 35 - 59 C) ponds and outflows, the surface morphology of tufted Phormidium mats is preserved through mat underplating by thin siliceous: crusts. Microbial taxes lead to clumping of ceils and/or preferred filament orientations that together define higher order composite fabrics in thermal spring stromatolites (e.g. network, coniform, and palisade). At lower temperatures (less than 35 C), Calothrix mats cover shallow terracette pools forming flat carpets or pustular

Getting to the future through silviculture - Workshop proceedings

Science.gov (United States)

Dennis Murphy

1992-01-01

Includes 19 papers documenting presentations at the 1991 Forest Service National Silviculture Workshop. Discussions focus on the role of silviculture in New Perspectives (ecosystem management), new approaches to the practice of silviculture, and examples of successful integration of practices into multi resource management.

Beginning Spring

CERN Document Server

Caliskan, Mert

2015-01-01

Get up to speed quickly with this comprehensive guide toSpring Beginning Spring is the complete beginner's guide toJava's most popular framework. Written with an eye towardreal-world enterprises, the book covers all aspects of applicationdevelopment within the Spring Framework. Extensive samples withineach chapter allow developers to get up to speed quickly byproviding concrete references for experimentation, building askillset that drives successful application development byexploiting the full capabilities of Java's latest advances. Spring provides the exact toolset required to build anent

Report on the Aseismic Slip, Tremor, and Earthquakes Workshop

Science.gov (United States)

Gomberg, Joan; Roeloffs, Evelyn; Trehu, Anne; Dragert, Herb; Meertens, Charles

2008-01-01

This report summarizes the discussions and information presented during the workshop on Aseismic Slip, Tremor, and Earthquakes. Workshop goals included improving coordination among those involved in conducting research related to these phenomena, assessing the implications for earthquake hazard assessment, and identifying ways to capitalize on the education and outreach opportunities presented by these phenomena. Research activities of focus included making, disseminating, and analyzing relevant measurements; the relationships among tremor, aseismic or 'slow-slip', and earthquakes; and discovering the underlying causative physical processes. More than 52 participants contributed to the workshop, held February 25-28, 2008 in Sidney, British Columbia. The workshop was sponsored by the U.S. Geological Survey, the National Science Foundation?s Earthscope Program and UNAVCO Consortium, and the Geological Survey of Canada. This report has five parts. In the first part, we integrate the information exchanged at the workshop as it relates to advancing our understanding of earthquake generation and hazard. In the second part, we summarize the ideas and concerns discussed in workshop working groups on Opportunities for Education and Outreach, Data and Instrumentation, User and Public Needs, and Research Coordination. The third part presents summaries of the oral presentations. The oral presentations are grouped as they were at the workshop in the categories of phenomenology, underlying physical processes, and implications for earthquake hazards. The fourth part contains the meeting program and the fifth part lists the workshop participants. References noted in parentheses refer to the authors of presentations made at the workshop, and published references are noted in square brackets and listed in the Reference section. Appendix A contains abstracts of all participant presentations and posters, which also have been posted online, along with presentations and author contact

Automatic Generation of Setup for CNC Spring Coiler Based on Case-based Reasoning

Institute of Scientific and Technical Information of China (English)

KU Xiangchen; WANG Runxiao; LI Jishun; WANG Dongbo

2006-01-01

When producing special-shape spring in CNC spring coiler, the setup of the coiler is often a manual work using a trial-and-error method. As a result, the setup of coiler consumes so much time and becomes the bottleneck of the spring production process. In order to cope with this situation, this paper proposes an automatic generation system of setup for CNC spring coiler using case-based reasoning (CBR). The core of the study contains: (1) integrated reasoning model of CBR system;(2) spatial shape describe of special-shape spring based on feature;(3) coiling case representation using shape feature matrix; and (4) case similarity measure algorithm. The automatic generation system has implemented with C++ Builder 6.0 and is helpful in improving the automaticity and efficiency of spring coiler.

Building Community Consensus for Earth Science Literacy Using an Online Workshop (Invited)

Science.gov (United States)

Wysession, M. E.; Tuddenham, P.; Taber, J.; Ladue, N.

2009-12-01

The Earth Science Literacy Principles, published in the spring of 2009, represented a community consensus about what all Americans should understand about Earth sciences. Central to its creation was a 2-week online workshop that involved participation by 350 Earth scientists and educators. The online workshop, hosted by The College of Exploration, was an excellent medium for incorporating the ideas and concerns of 350 people in near-real time. NSF tasked the Earth Science Literacy Initiative (ESLI) (www.earthscienceliteracy.org) with constructing a set of “Big Ideas” and “Supporting Concepts” that distilled the essential understandings of the GEO-EAR division of NSF. Because of the wide diversity of sub-fields involved (ranging from paleobiology to tectonics), finding a mechanism for incorporating many different views while retaining an organized structure was a challenge. The online workshop turned out to be ideal for this task. Though the 2-week asynchronous workshop was designed to replicate a 2-day in-person workshop, at the drawn-out pace of one hour of requested participation per day, in reality it was much more productive. Many aspects of an in-person workshop were replicated in the the online space. Plenary talks were presented in the main conference room via videos recorded just before or during the 2-week period. The workshop was structured with 150 invited participants and 200 observers. The participants had access to all of the rooms while the observers could see all rooms but could only chat in their own area, the Observation Café. Each breakout room had a moderator who attempted to guide discussion, including suggesting off-topic conversations be moved to the Earth Café. An organizing committee of about a dozen people teleconferenced daily, determining the goals or tasks for the participants for that day. This allowed for a high level of flexibility, with the workshop structure flowing in response to the results up to that point. The first

Influence of spring phenology on seasonal and annual carbon balance in two contrasting New England forests.

Science.gov (United States)

Richardson, Andrew D; Hollinger, David Y; Dail, D Bryan; Lee, John T; Munger, J William; O'keefe, John

2009-03-01

Spring phenology is thought to exert a major influence on the carbon (C) balance of temperate and boreal ecosystems. We investigated this hypothesis using four spring onset phenological indicators in conjunction with surface-atmosphere CO(2) exchange data from the conifer-dominated Howland Forest and deciduous-dominated Harvard Forest AmeriFlux sites. All phenological measures, including CO(2) source-sink transition dates, could be well predicted on the basis of a simple two-parameter spring warming model, indicating good potential for improving the representation of phenological transitions and their dynamic responsiveness to climate variability in land surface models. The date at which canopy-scale photosynthetic capacity reached a threshold value of 12 micromol m(-2) s(-1) was better correlated with spring and annual flux integrals than were either deciduous or coniferous bud burst dates. For all phenological indicators, earlier spring onset consistently, but not always significantly, resulted in higher gross primary productivity (GPP) and ecosystem respiration (RE) for both seasonal (spring months, April-June) and annual flux integrals. The increase in RE was less than that in GPP; depending on the phenological indicator used, a one-day advance in spring onset increased springtime net ecosystem productivity (NEP) by 2-4 g C m(-2) day(-1). In general, we could not detect significant differences between the two forest types in response to earlier spring, although the response to earlier spring was generally more pronounced for Harvard Forest than for Howland Forest, suggesting that future climate warming may favor deciduous species over coniferous species, at least in this region. The effect of earlier spring tended to be about twice as large when annual rather than springtime flux integrals were considered. This result is suggestive of both immediate and lagged effects of earlier spring onset on ecosystem C cycling, perhaps as a result of accelerated N cycling

Just Spring

CERN Document Server

Konda, Madhusudhan

2011-01-01

Get a concise introduction to Spring, the increasingly popular open source framework for building lightweight enterprise applications on the Java platform. This example-driven book for Java developers delves into the framework's basic features, as well as advanced concepts such as containers. You'll learn how Spring makes Java Messaging Service easier to work with, and how its support for Hibernate helps you work with data persistence and retrieval. Throughout Just Spring, you'll get your hands deep into sample code, beginning with a problem that illustrates dependency injection, Spring's co

Designing and Using Videos in Undergraduate Geoscience Education - a workshop and resource website review

Science.gov (United States)

Wiese, K.; Mcconnell, D. A.

2014-12-01

Do you use video in your teaching? Do you make your own video? Interested in joining our growing community of geoscience educators designing and using video inside and outside the classroom? Over four months in Spring 2014, 22 educators of varying video design and development expertise participated in an NSF-funded On the Cutting Edge virtual workshop to review the best educational research on video design and use; to share video-development/use strategies and experiences; and to develop a website of resources for a growing community of geoscience educators who use video: http://serc.carleton.edu/NAGTWorkshops/video/workshop2014/index.html. The site includes links to workshop presentations, teaching activity collections, and a growing collection of online video resources, including "How-To" videos for various video editing or video-making software and hardware options. Additional web resources support several topical themes including: using videos to flip classes, handling ADA access and copyright issues, assessing the effectiveness of videos inside and outside the classroom, best design principles for video learning, and lists and links of the best videos publicly available for use. The workshop represents an initial step in the creation of an informal team of collaborators devoted to the development and support of an ongoing network of geoscience educators designing and using video. Instructors who are interested in joining this effort are encouraged to contact the lead author.

Atomic physics at the Advanced Photon Source: Workshop report

International Nuclear Information System (INIS)

1990-10-01

The first Workshop on Atomic Physics at the Advanced Photon Source was held at Argonne National Laboratory on March 29--30, 1990. The unprecedented brightness of the Advanced Photon Source (APS) in the hard X-ray region is expected to make possible a vast array of new research opportunities for the atomic-physics community. Starting with discussions of the history and current status of the field, presentations were made on various future directions for research with hard X-rays interacting with atoms, ions, clusters, and solids. Also important were the discussions on the design and status of the four next-generation rings coming on line during the 1990's: the ALS 1.6 GeV ring at Berkeley; the ESRF 6.0-GeV ring at Grenoble (1993); the APS 7.0-GeV ring at Argonne (1995); and the SPring-8 8.0-GeV ring in Japan (1998). The participation of more than one hundred scientists from domestic as well as foreign institutions demonstrated a strong interest in this field. We plan to organize follow-up workshops in the future emphasizing specific research topics

Developing workshop module of realistic mathematics education: Follow-up workshop

Science.gov (United States)

Palupi, E. L. W.; Khabibah, S.

2018-01-01

Realistic Mathematics Education (RME) is a learning approach which fits the aim of the curriculum. The success of RME in teaching mathematics concepts, triggering students’ interest in mathematics and teaching high order thinking skills to the students will make teachers start to learn RME. Hence, RME workshop is often offered and done. This study applied development model proposed by Plomp. Based on the study by RME team, there are three kinds of RME workshop: start-up workshop, follow-up workshop, and quality boost. However, there is no standardized or validated module which is used in that workshops. This study aims to develop a module of RME follow-up workshop which is valid and can be used. Plopm’s developmental model includes materials analysis, design, realization, implementation, and evaluation. Based on the validation, the developed module is valid. While field test shows that the module can be used effectively.

Novel method for equivalent stiffness and Coulomb's damping ratio analyses of leaf spring

International Nuclear Information System (INIS)

Wen Jun, Wu; Yu, Xiang; Le Mei, Zhu; Li Jun, He

2012-01-01

The leaf spring is a representative type of laminated structure. Based on the linear theories of curve beams, the first derivatives of the leave's status vector of the leaf spring are provided. The first derivatives of the combination status-vector are obtained by properly dealing with the nonlinear interacted forces between adjacent leaves. Moreover, the precise integration technology and the transform matrix method are introduced to solve the equations. The force displacement curve of a leaf spring is then calculated separately by using the present method and the finite element software ANSYS. From the results, the precision and advantages of the present methods for analyzing the leaf spring are revealed. The Coulomb's damping ratio of the leaf spring is studied by using the present method

Creating Fantastic PI Workshops

Energy Technology Data Exchange (ETDEWEB)

Biedermann, Laura B. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Clark, Blythe G. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Colbert, Rachel S. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Dagel, Amber Lynn [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Gupta, Vipin P. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Hibbs, Michael R. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Perkins, David Nikolaus [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); West, Roger Derek [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2015-10-01

The goal of this SAND report is to provide guidance for other groups hosting workshops and peerto-peer learning events at Sandia. Thus this SAND report provides detail about our team structure, how we brainstormed workshop topics and developed the workshop structure. A Workshop “Nuts and Bolts” section provides our timeline and check-list for workshop activities. The survey section provides examples of the questions we asked and how we adapted the workshop in response to the feedback.

Integrating themes, evidence gaps, and research needs identified by workshop on iron screening and supplementation in iron-replete pregnant women and young children.

Science.gov (United States)

Brannon, Patsy M; Stover, Patrick J; Taylor, Christine L

2017-12-01

This report addresses the evidence and the uncertainties, knowledge gaps, and research needs identified by participants at the NIH workshop related to iron screening and routine iron supplementation of largely iron-replete pregnant women and young children (6-24 mo) in developed countries. The workshop presentations and panel discussions focused on current understanding and knowledge gaps related to iron homeostasis, measurement of and evidence for iron status, and emerging concerns about supplementing iron-replete members of these vulnerable populations. Four integrating themes emerged across workshop presentations and discussion and centered on 1 ) physiologic or developmental adaptations of iron homeostasis to pregnancy and early infancy, respectively, and their implications, 2 ) improvement of the assessment of iron status across the full continuum from iron deficiency anemia to iron deficiency to iron replete to iron excess, 3 ) the linkage of iron status with health outcomes beyond hematologic outcomes, and 4 ) the balance of benefit and harm of iron supplementation of iron-replete pregnant women and young children. Research that addresses these themes in the context of the full continuum of iron status is needed to inform approaches to the balancing of benefits and harms of screening and routine supplementation. © 2017 American Society for Nutrition.

Workshop on SHAring and Reusing architectural Knowledge: (SHARK 2011)

NARCIS (Netherlands)

Avgeriou, P.; Lago, P.; Kruchten, P.; Taylor, R.N.; Gall, H.; Medvidovic, N.

2011-01-01

Architectural Knowledge (AK) is defined as the integrated representation of the software architecture of a software-intensive system or family of systems along with architectural decisions and their rationale, external influence and the development environment. The SHARK workshop series focuses on

Between the Stars: A Professional Development Workshop for Teachers

Science.gov (United States)

Hemenway, Mary Kay; Redfield, S.

2008-05-01

A workshop for secondary school science teachers was conducted at McDonald Observatory in July 2007. Participants did classroom experiments to detect and compare radiation in the ultraviolet, optical, and infrared regions of the electromagnetic spectrum. Other activities involved various aspects of stellar evolution and telescope design. They built spectrometers and considered how astronomers use scientific models. These topics were chosen to help them form a conceptual understanding of the parent projects' research topic: Variations in the Ionization Structure within the Local Interstellar Cloud and Neighboring Clouds. Fifteen teachers from Alaska, Idaho, Michigan, New York, Ohio, Oklahoma, and Texas performed these standards-aligned activities at the workshop in preparation for using them within their own classrooms. During three scheduled nights of observing, the participants became familiar with the night sky and the operation of small telescopes. The workshop included tours of other observatory facilities and time to reflect on their own teaching practices. They concluded the workshop by developing concept maps that integrated all aspects of the workshop, including lectures, activities, observing experiences, and tours. Support from The National Aeronautics and Space Administration under an Education and Public Outreach supplement to the Far Ultraviolet Spectroscopic Explorer Guest Investigator grant NNX07AN07G issued through the Office of Space Science is gratefully acknowledged.

Pro Spring Batch

CERN Document Server

Minella, Michael T

2011-01-01

Since its release, Spring Framework has transformed virtually every aspect of Java development including web applications, security, aspect-oriented programming, persistence, and messaging. Spring Batch, one of its newer additions, now brings the same familiar Spring idioms to batch processing. Spring Batch addresses the needs of any batch process, from the complex calculations performed in the biggest financial institutions to simple data migrations that occur with many software development projects. Pro Spring Batch is intended to answer three questions: *What? What is batch processing? What

A study on calculation method for mechanical impedance of air spring

International Nuclear Information System (INIS)

Changgeng, Shuai; Penghui, Li; Rustighi, Emiliano

2016-01-01

This paper proposes an approximate analytic method of obtaining the mechanical impedance of air spring. The sound pressure distribution in cylindrical air spring is calculated based on the linear air wave theory. The influences of different boundary conditions on the acoustic pressure field distribution in cylindrical air spring are analysed. A 1-order ordinary differential matrix equation for the state vector of revolutionary shells under internal pressure is derived based on the non-moment theory of elastic thin shell. Referring to the transfer matrix method, a kind of expanded homogeneous capacity high precision integration method is introduced to solve the non-homogeneous matrix differential equation. Combined the solved stress field of shell with the calculated sound pressure field in air spring under the displacement harmonic excitation, the approximate analytical expression of the input and transfer mechanical impedance for the air spring can be achieved. The numerical simulation with the Comsol Multiphysics software verifies the correctness of theoretical analysis result. (paper)

Cementitious Materials in Safety Cases for Geological Repositories for Radioactive Waste: Role, Evolution and Interactions. A Workshop organised by the OECD/NEA Integration Group for the Safety Case and hosted by ONDRAF/NIRAS. Cementitious materials in safety cases for radioactive waste: role, evolution and interactions

International Nuclear Information System (INIS)

2012-01-01

The OECD Nuclear Energy Agency (NEA) Integration Group for the Safety Case (IGSC) organised a workshop to assess current understanding on the use of cementitious materials in radioactive waste disposal. The workshop was hosted by the Belgian Agency for Radioactive Waste and Enriched Fissile Materials (Ondraf/Niras), in Brussels, Belgium on 17-19 November 2009. The workshop brought together a wide range of people involved in supporting safety case development and having an interest in cementitious materials: namely, cement and concrete experts, repository designers, scientists, safety assessors, disposal programme managers and regulators. The workshop was designed primarily to consider issues relevant to the post-closure safety of radioactive waste disposal, but also addressed some related operational issues, such as cementitious barrier emplacement. Where relevant, information on cementitious materials from analogous natural and anthropogenic systems was also considered. This report provides a synthesis of the workshop, and summarises its main results and findings. The structure of this report follows the workshop agenda: - Section 2 summarises plenary and working group discussions on the uses, functions and evolution of cementitious materials in geological disposal, and highlights key aspects and discussions points. - Section 3 summarises plenary and working group discussions on interactions of cementitious materials with other disposal system components, and highlights key aspects and discussions points. - Section 4 summarises the workshop session on the integration of issues related to cementitious materials using the safety case. - Section 5 presents the main conclusions from the workshop. - Section 6 contains a list of references. - Appendix A presents the workshop agenda. - Appendix B contains the abstracts and, where provided, technical papers supporting oral presentations at the workshop. - Appendix C contains the abstracts and, where provided, technical

Efficient Method for Calculating the Composite Stiffness of Parabolic Leaf Springs with Variable Stiffness for Vehicle Rear Suspension

Directory of Open Access Journals (Sweden)

Wen-ku Shi

2016-01-01

Full Text Available The composite stiffness of parabolic leaf springs with variable stiffness is difficult to calculate using traditional integral equations. Numerical integration or FEA may be used but will require computer-aided software and long calculation times. An efficient method for calculating the composite stiffness of parabolic leaf springs with variable stiffness is developed and evaluated to reduce the complexity of calculation and shorten the calculation time. A simplified model for double-leaf springs with variable stiffness is built, and a composite stiffness calculation method for the model is derived using displacement superposition and material deformation continuity. The proposed method can be applied on triple-leaf and multileaf springs. The accuracy of the calculation method is verified by the rig test and FEA analysis. Finally, several parameters that should be considered during the design process of springs are discussed. The rig test and FEA analytical results indicate that the calculated results are acceptable. The proposed method can provide guidance for the design and production of parabolic leaf springs with variable stiffness. The composite stiffness of the leaf spring can be calculated quickly and accurately when the basic parameters of the leaf spring are known.

Process improvements for enhanced productivity of PHWR garter springs

International Nuclear Information System (INIS)

Srinivasula Reddy, S.; Tonpe, Sunil; Saibaba, N.; Jayaraj, R.N.

2009-01-01

Full text: In Pressurised Heavy Water Reactors (PHWR), Garter springs are used as spacers between the coolant tube and calandria tube. Garter springs are made from Zirconium alloy containing 2.5 % Niobium and 0.5% copper. The springs are basically manufactured by coiling a wire of cross section 1.7 mm x 1.0 mm, which is produced by series of drawing and swaging operations using hot extruded rods of 19 mm diameter. The manufacturing process also involves heat treatment and chemical cleaning operations at appropriate stages. It is required to ensure that the life of springs against parameters like hydrogen pickup, residual stresses and low stiffness is improved at the manufacturing stage itself by improving manufacturing process. The impact of above problems on spring life and process improvements is briefly discussed. The critical factor affecting the garter spring performance in PHWR Reactor is mainly hydrogen. The life limiting factors for garter springs are the problems arising out of high total hydrogen content, which depends on the hydrogen pickup during reactor operation. This phenomenon can happen during the reactor operation, as springs are prone to pick-up hydrogen in the reactor environment. Hence acceptable hydrogen content for the springs is specified as 25 ppm (max.). Garter spring is susceptible to hydrogen pick-up during various production processes, which make material brittle and difficult for fabrication process such as wire drawing and coiling. By studying and optimizing the process parameters of spring manufacturing, the hydrogen pick-up of springs is brought down from 70 ppm to a level of 20 ppm. Garter springs are provided with a hook at each end to enable its assembly to coolant tube in the reactor. The hook portion is very critical in maintaining the integrity of the spring. It is desirable to have the hook portion relieved of all residual stresses. For this purpose manufacturing process has been modified and solutionising was introduced as

Japanese contributions to the Japan-US workshop on FER/ETR design

International Nuclear Information System (INIS)

Tone, Tatsuzo; Iida, Hiromasa; Sugihara, Masayoshi; Kasahara, Tatsuo; Nishikawa, Masana; Kitamura, Kazunori; Kuroda, Toshimasa.

1984-06-01

This reports describes Japanese presentations at the Japan-US Workshop on FER/ETR Design which was held at Fusion Engineering Design Center, Oak Ridge National Laboratory, March 26-30, 1984. The presentations cover the overview of Fusion Experimental Reactor (FER) design and major outcomes obtained from the FER design work in FY1983 on the three topics for the Workshop which are (1) RF heating and current drive, (2) impurity control and divertor/pumped limiter design, and (3) design integration and maintenance. (author)

The Educational Workshops Importance of Students in Teaching-learning Deaf

Directory of Open Access Journals (Sweden)

Paula Cristina Cristina de Oliveira Vons

2016-02-01

Full Text Available Inclusive educational workshops can be used as teaching strategies for deaf students to integrate into society, allowing who are beneficiaries of diversified teaching methods, encouraging them to become active citizens in their rights and duties according to their potential. In order to build knowledge collectively, inclusive educational workshops were developed as the project methodology "The Natural Science Museum Goes to School: a proposal for inclusive education", which aimed to raise awareness among deaf students of the School of Special Education Helen Keller Caxias do Sul / RS on the importance of environmental preservation. The workshops allowed autonomy in the construction of knowledge as related theory with practice, creating situations where students stopped being only learning receivers. Workshops were held as hanging garden, environmental commitment, sensory garden, animals in origami, green puppet, puppet fish and terrarium. Participated in these activities students from 1st to 9th grades of elementary school and adult education, covering 102 participants. During the workshops inquiries were carried out, encouraging students to share prior knowledge with colleagues and enabling these acquire new environmental information, making meaningful learning. Pedagogical workshops should be used as support tools in the classroom, and worked in continuous and interdisciplinary way. As a result, deaf students feel valued and producers of their knowledge and will experience different activities recognizing the importance of learning to their daily lives.

Yakima River Spring Chinook Enhancement Study, 1991 Final Report.

Energy Technology Data Exchange (ETDEWEB)

Fast, David E.

1991-05-01

The population of Yakima River spring chinook salmon (Oncorhynchus tschawytscha) has been drastically reduced from historic levels reported to be as high as 250,000 adults (Smoker 1956). This reduction is the result of a series of problems including mainstem Columbia dams, dams within the Yakima itself, severely reduced flows due to irrigation diversions, outmigrant loss in irrigation canals, increased thermal and sediment loading, and overfishing. Despite these problems, the return of spring chinook to the Yakima River has continued at levels ranging from 854 to 9,442 adults since 1958. In October 1982, the Bonneville Power Administration contracted the Yakima Indian Nation to develop methods to increase production of spring chinook in the Yakima system. The Yakima Nation's current enhancement policy attempts to maintain the genetic integrity of the spring chinook stock native to the Yakima Basin. Relatively small numbers of hatchery fish have been released into the basin in past years. The goal of this study was to develop data that will be used to present management alternatives for Yakima River spring chinook. A major objective of this study is to determine the distribution, abundance and survival of wild Yakima River spring chinook. The second major objective of this study is to determine the relative effectiveness of different methods of hatchery supplementation. The last three major objectives of the study are to locate and define areas in the watershed that may be used for the rearing of spring chinook; to define strategies for enhancing natural production of spring chinook in the Yakima River; and to determine the physical and biological limitations on production within the system. 47 refs., 89 figs., 67 tabs.

Workshops as a Research Methodology

Science.gov (United States)

Ørngreen, Rikke; Levinsen, Karin

2017-01-01

This paper contributes to knowledge on workshops as a research methodology, and specifically on how such workshops pertain to e-learning. A literature review illustrated that workshops are discussed according to three different perspectives: workshops as a means, workshops as practice, and workshops as a research methodology. Focusing primarily on…

Bridging the Gap from Networking Technologies to Applications: Workshop Report

Science.gov (United States)

Johnson, Marjory J.; desJardins, Richard

2000-01-01

The objective of the Next Generation Internet (NGI) Federal program is threefold, encompassing development of networking technologies, high-performance network testbeds, and revolutionary applications. There have been notable advances in emerging network technologies and several nationwide testbeds have been established, but the integration of emerging technologies into applications is lagging. To help bridge this gap between developers of NGI networking technologies and developers of NGI applications, the NASA Research and Education Network (NREN) project hosted a two-day workshop at NASA Ames Research Center in August 1999. This paper presents a summary of the results of this workshop and also describes some of the challenges NREN is facing while incorporating new technologies into HPCC and other NASA applications. The workshop focused on three technologies - Quality of Service (QoS), advanced multicast, and security-and five major NGI application areas - telemedicine, digital earth, digital video, distributed data-intensive applications, and computational infrastructure applications. Network technology experts, application developers, and NGI testbed representatives came together at the workshop to promote cross-fertilization between the groups. Presentations on the first day, including an overview of the three technologies, application case studies and testbed status reports, laid the foundation for discussions on the second day. The objective of these latter discussions, held within smaller breakout groups, was to establish a coherent picture of the current status of the various pieces of each of the three technologies, to create a roadmap outlining future technology development, and to offer technological guidance to application developers. In this paper we first present a brief overview of the NGI applications that were represented at the workshop, focusing on the identification of technological advances that have successfully been incorporated in each

Thermal springs of Wyoming

Energy Technology Data Exchange (ETDEWEB)

Breckenridge, R.M.; Hinckley, B.S.

1978-01-01

This bulletin attempts, first, to provide a comprehensive inventory of the thermal springs of Wyoming; second, to explore the geologic and hydrologic factors producing these springs; and, third, to analyze the springs collectively as an indicator of the geothermal resources of the state. A general discussion of the state's geology and the mechanisms of thermal spring production, along with a brief comparison of Wyoming's springs with worldwide thermal features are included. A discussion of geothermal energy resources, a guide for visitors, and an analysis of the flora of Wyoming's springs follow the spring inventory. The listing and analysis of Wyoming's thermal springs are arranged alphabetically by county. Tabulated data are given on elevation, ownership, access, water temperature, and flow rate. Each spring system is described and its history, general characteristics and uses, geology, hydrology, and chemistry are discussed. (MHR)

Spring 5 & reactive streams

CERN Multimedia

CERN. Geneva; Clozel, Brian

2017-01-01

Spring is a framework widely used by the world-wide Java community, and it is also extensively used at CERN. The accelerator control system is constituted of 10 million lines of Java code, spread across more than 1000 projects (jars) developed by 160 software engineers. Around half of this (all server-side Java code) is based on the Spring framework. Warning: the speakers will assume that people attending the seminar are familiar with Java and Spring’s basic concepts. Spring 5.0 and Spring Boot 2.0 updates (45 min) This talk will cover the big ticket items in the 5.0 release of Spring (including Kotlin support, @Nullable and JDK9) and provide an update on Spring Boot 2.0, which is scheduled for the end of the year. Reactive Spring (1h) Spring Framework 5.0 has been released - and it now supports reactive applications in the Spring ecosystem. During this presentation, we'll talk about the reactive foundations of Spring Framework with the Reactor project and the reactive streams specification. We'll al...

Strontium isotopic composition of hot spring and mineral spring waters, Japan

International Nuclear Information System (INIS)

Notsu, Kenji; Wakita, Hiroshi; Nakamura, Yuji

1991-01-01

In Japan, hot springs and mineral springs are distributed in Quaternary and Neogene volcanic regions as well as in granitic, sedimentary and metamorphic regions lacking in recent volcanic activity. The 87 Sr/ 86 Sr ratio was determined in hot spring and mineral spring waters obtained from 47 sites. The ratios of waters from Quaternary and Neogene volcanic regions were in the range 0.703-0.708, which is lower than that from granitic, sedimentary and metamorphic regions (0.706-0.712). The geographical distribution of the ratios coincides with the bedrock geology, and particularly the ratios of the waters in Quaternary volcanic regions correlate with those of surrounding volcanic rocks. These features suggest that subsurface materials control the 87 Sr/ 86 Sr ratios of soluble components in the hot spring and mineral spring waters. (author)

Report of the first international workshop on human chromosome 8 mapping. Final report

Energy Technology Data Exchange (ETDEWEB)

Wood, S.; Ben Othmane, K.; Bergerheim, U.S.R. [and others

1993-12-31

The first international chromosome 8 workshop was held in Vancouver, Canada May 2--4, 1993. The conference was attended by 23 participants from Australia, Canada, Germany, the Netherlands, Sweden, the United Kingdom and the US. Twenty three abstracts are included from this workshop. The workshop was supported by CGAT/CTAG (Canadian Genome Analysis & Technology Program/Programme Canadien de Technologie & D`Analyse du Genome) as well as by travel funds allocated by the National Institutes of Health and the Department of Energy of the United States and by agencies within the countries of overseas participants. The goals of the workshop were to evaluate new locus assignments, review new data obtained for previously assigned loci, develop a consensus marker order for chromosome 8, assess and integrate physical mapping information, identify resources and foster collaboration.

MOOC Design Workshop

DEFF Research Database (Denmark)

Nørgård, Rikke Toft; Mor, Yishay; Warburton, Steven

2016-01-01

For the last two years we have been running a series of successful MOOC design workshops. These workshops build on previous work in learning design and MOOC design patterns. The aim of these workshops is to aid practitioners in defining and conceptualising educational innovations (predominantly......, but not exclusively MOOCs) which are based on an empathic user-centered view of the target learners and teachers. In this paper, we share the main principles, patterns and resources of our workshops and present some initial results for their effectiveness...

A natural tracer investigation of the hydrological regime of Spring Creek Springs, the largest submarine spring system in Florida

Science.gov (United States)

Dimova, Natasha T.; Burnett, William C.; Speer, Kevin

2011-04-01

This work presents results from a nearly two-year monitoring of the hydrologic dynamics of the largest submarine spring system in Florida, Spring Creek Springs. During the summer of 2007 this spring system was observed to have significantly reduced flow due to persistent drought conditions. Our examination of the springs revealed that the salinity of the springs' waters had increased significantly, from 4 in 2004 to 33 in July 2007 with anomalous high radon ( 222Rn, t1/2=3.8 days) in surface water concentrations indicating substantial saltwater intrusion into the local aquifer. During our investigation from August 2007 to May 2009 we deployed on an almost monthly basis a continuous radon-in-water measurement system and monitored the salinity fluctuations in the discharge area. To evaluate the springs' freshwater flux we developed three different models: two of them are based on water velocity measurements and either salinity or 222Rn in the associated surface waters as groundwater tracers. The third approach used only salinity changes within the spring area. The three models showed good agreement and the results confirmed that the hydrologic regime of the system is strongly correlated to local precipitation and water table fluctuations with higher discharges after major rain events and very low, even reverse flow during prolong droughts. High flow spring conditions were observed twice during our study, in the early spring and mid-late summer of 2008. However the freshwater spring flux during our observation period never reached that reported from a 1970s value of 4.9×10 6 m 3/day. The maximum spring flow was estimated at about 3.0×10 6 m 3/day after heavy precipitation in February-March 2008. As a result of this storm (total of 173 mm) the salinity in the spring area dropped from about 27 to 2 in only two days. The radon-in-water concentrations dramatically increased in parallel, from about 330 Bq/m 3 to about 6600 Bq/m 3. Such a rapid response suggests a direct

Geothermal system boundary at the northern edge of Patuha Geothermal Field based on integrated study of volcanostratigraphy, geological field mapping, and cool springs contamination by thermal fluids

Science.gov (United States)

Suryantini; Rachmawati, C.; Abdurrahman, M.

2017-12-01

Patuha Geothermal System is a volcanic hydrothermal system. In this type of system, the boundary of the system is often determined by low resistivity (10 ohm.m) anomaly from Magnetotelluric (MT) or DC-Resistivity survey. On the contrary, during geothermal exploration, the system boundary often need to be determined as early as possible even prior of resistivity data available. Thus, a method that use early stage survey data must be developed properly to reduce the uncertainty of the geothermal area extent delineation at the time the geophysical data unavailable. Geological field mapping, volcanostratigraphy analysis and fluid chemistry of thermal water and cold water are the data available at the early stage of exploration. This study integrates this data to delineate the geothermal system boundary. The geological mapping and volcanostratigraphy are constructed to limit the extent of thermal and cold springs. It results that springs in the study area are controlled hydrologically by topography of Patuha Volcanic Crown (complex) or so called PVC, the current geothermal field and Masigit Volcanic Crown (complex) or so called MVC, the dormant volcano not associated with active geothermal system. Some of the cold springs at PVC are contaminated by subsurface steam heated outflow while others are not contaminated. The contaminated cold springs have several characteristics such as higher water temperature than ambient temperature at the time it was measured, higher total disolved solid (TDS), and lower pH. The soluble elements analysis support the early contamination indication by showing higher cation and anion, and positive oxygen shifting of stable isotope of these cool springs. Where as the uncontaminated spring shows similar characteristic with cool springs occur at MVC. The boundary of the system is delineated by an arbitrary line drawn between distal thermal springs from the upflow or contaminated cool springs with the cool uncontaminated springs. This boundary is

8th international workshop on large-scale integration of wind power into power systems as well as on transmission networks for offshore wind farms. Proceedings

International Nuclear Information System (INIS)

Betancourt, Uta; Ackermann, Thomas

2009-01-01

Within the 8th International Workshop on Large-Scale Integration of Wind Power into Power Systems as well as on Transmission Networks for Offshore Wind Farms at 14th to 15th October, 2009 in Bremen (Federal Republic of Germany), lectures and posters were presented to the following sessions: (1) Keynote session and panel; (2) Grid integration studies and experience: Europe; (3) Connection of offshore wind farms; (4) Wind forecast; (5) High voltage direct current (HVDC); (6) German grid code issues; (7) Offshore grid connection; (8) Grid integration studies and experience: North America; (9) SUPWIND - Decision support tools for large scale integration of wind; (10) Windgrid - Wind on the grid: An integrated approach; (11) IEA Task 25; (12) Grid code issues; (13) Market Issues; (14) Offshore Grid; (15) Modelling; (16) Wind power and storage; (17) Power system balancing; (18) Wind turbine performance; (19) Modelling and offshore transformer.

How could discharge management affect Florida spring fish assemblage structure?

Science.gov (United States)

Work, Kirsten; Codner, Keneil; Gibbs, Melissa

2017-08-01

Freshwater bodies are increasingly affected by reductions in water quantity and quality and by invasions of exotic species. To protect water quantity and maintain the ecological integrity of many water bodies in central Florida, a program of adopting Minimum Flows and Levels (MFLs) has begun for both lentic and lotic waters. The purpose of this study was to determine whether there were relationships between discharge and stage, water quality, and biological parameters for Volusia Blue Spring, a first magnitude spring (discharge > 380,000 m 3 day -1 or 100 mgd) for which an MFL program was adopted in 2006. Over the course of fourteen years, we assessed fish density and diversity weekly, monthly, or seasonally with seine and snorkel counts. We evaluated annual changes in the assemblages for relationships with water quantity and quality. Low discharge and dissolved oxygen combined with high stage and conductivity produced a fish population with a lower density and diversity in 2014 than in previous years. Densities of fish taxonomic/functional groups also were low in 2014 and measures of water quantity were significant predictors of fish assemblage structure. As a result of the strong relationships between variation in discharge and an array of chemical and biological characteristics of the spring, we conclude that maintaining the historical discharge rate is important for preserving the ecological integrity of Volusia Blue Spring. Copyright © 2017 Elsevier Ltd. All rights reserved.

Integrated care in an international perspective: EUPHA proceedings December 2001.

NARCIS (Netherlands)

Delnoij, D.; Klazinga, N.; Kulu Glasgow, I.

2002-01-01

The workshop of the EUPHA section Health Services Research took place on Thursday, December 8th, 2001 in Brussels at the annual conference of the EUPHA (European Public Health Association). The theme of the workshop was integrated care in an international perspective. Integrated care can be defined

77 FR 12313 - Food Labeling Workshop; Public Workshop

Science.gov (United States)

2012-02-29

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2012-N-0001] Food Labeling Workshop; Public Workshop AGENCY: Food and Drug Administration, HHS. ACTION: Notice of... District Office (DALDO), in collaboration with Oklahoma State University (OSU), Robert M. Kerr Food...

75 FR 29775 - Food Labeling Workshop; Public Workshop

Science.gov (United States)

2010-05-27

... DEPARTMENT OF HEALTH AND HUMAN SERVICES [Docket No. FDA-2010-N-0001] Food and Drug Administration Food Labeling Workshop; Public Workshop AGENCY: Food and Drug Administration, HHS. ACTION: Notice of...: Institute of Food Science & Engineering, University of Arkansas, 2650 North Young Ave., Fayetteville, AR...

Workshop Physics Activity Guide, Module 4: Electricity and Magnetism

Science.gov (United States)

Laws, Priscilla W.

2004-05-01

The Workshop Physics Activity Guide is a set of student workbooks designed to serve as the foundation for a two-semester calculus-based introductory physics course. It consists of 28 units that interweave text materials with activities that include prediction, qualitative observation, explanation, equation derivation, mathematical modeling, quantitative experiments, and problem solving. Students use a powerful set of computer tools to record, display, and analyze data, as well as to develop mathematical models of physical phenomena. The design of many of the activities is based on the outcomes of physics education research. The Workshop Physics Activity Guide is supported by an Instructor's Website that: (1) describes the history and philosophy of the Workshop Physics Project; (2) provides advice on how to integrate the Guide into a variety of educational settings; (3) provides information on computer tools (hardware and software) and apparatus; and (4) includes suggested homework assignments for each unit. Log on to the Workshop Physics Project website at http://physics.dickinson.edu/ Workshop Physics is a component of the Physics Suite--a collection of materials created by a group of educational reformers known as the Activity Based Physics Group. The Physics Suite contains a broad array of curricular materials that are based on physics education research, including: Understanding Physics, by Cummings, Laws, Redish and Cooney (an introductory textbook based on the best-selling text by Halliday/Resnick/Walker) RealTime Physics Laboratory Modules Physics by Inquiry (intended for use in a workshop setting) Interactive Lecture Demonstration Tutorials in Introductory Physics Activity Based Tutorials (designed primarily for use in recitations)

Systems Engineering Workshops | Wind | NREL

Science.gov (United States)

Workshops Systems Engineering Workshops The Wind Energy Systems Engineering Workshop is a biennial topics relevant to systems engineering and the wind industry. The presentations and agendas are available for all of the Systems Engineering Workshops: The 1st NREL Wind Energy Systems Engineering Workshop

Instant Spring Tool Suite

CERN Document Server

Chiang, Geoff

2013-01-01

Filled with practical, step-by-step instructions and clear explanations for the most important and useful tasks. A tutorial guide that walks you through how to use the features of Spring Tool Suite using well defined sections for the different parts of Spring.Instant Spring Tool Suite is for novice to intermediate Java developers looking to get a head-start in enterprise application development using Spring Tool Suite and the Spring framework. If you are looking for a guide for effective application development using Spring Tool Suite, then this book is for you.

Integrating IMS LD and IMS QTIv2 using CopperCore Service Integration

NARCIS (Netherlands)

Vogten, Hubert

2006-01-01

Vogten, H. (2006). Integrating IMS LD and IMS QTIv2 using CopperCore Service Integration. Presentation at International Workshop in Learning Networks for Lifelong Competence Development. March, 30-31, 2006. Sofia, Bulgaria: TENCompetence Conference. Retrieved June 30th, 2006, from

Aging phenomena in gaseous detectors - perspectives from the 2001 workshop

CERN Document Server

Hohlmann, M; Tesch, N; Titov, M

2002-01-01

High-Energy Physics experiments are currently entering a new era which requires the operation of gaseous particle detectors at unprecedented high rates and integrated particle fluxes. Full functionality of such detectors over the lifetime of an experiment in a harsh radiation environment is of prime concern. New classes of gaseous detectors such as large-scale straw-type detectors, Micro-pattern Gas Detectors, and resistive plate chambers--each with their own specific aging characteristics--have evolved since the first workshop on wire chamber aging was held at LBL, Berkeley in 1986. The 2001 workshop provided a forum to review the progress since 1986 in understanding aging effects and to exchange recent experiences. A summary of the main results reported at the 2001 workshop is presented providing a systematic review of aging effects in state-of-the-art detectors.

Executive Summary: “Mantle Frontier” Workshop

Directory of Open Access Journals (Sweden)

Workshop Report Writing Group

2011-03-01

Full Text Available The workshop on “Reaching the Mantle Frontier: Moho and Beyond” was held at the Broad Branch Road Campus of the Carnegie Institution of Washington on 9–11 September 2010. The workshop attracted seventy-four scientists and engineers from academia and industry in North America, Asia, and Europe.Reaching and sampling the mantle through penetration of the entire oceanic crust and the Mohorovičić discontinuity (Moho has been a longstanding goal of the Earth science community. The Moho is a seismic transition, often sharp, from a region with compressional wave velocities (Vp less than 7.5 km s-1 to velocities ~8 km s-1. It is interpreted in many tectonic settings, and particularly in tectonic exposures of oceanic lower crust, as the transition from igneous crust to mantle rocks that are the residues of melt extraction. Revealing the in situ geological meaning of the Moho is the heart of the Mohole project. Documenting ocean-crust exchanges and the nature and extent of the subseafloor biosphere have also become integral components of the endeavor. The purpose of the “Mantle Frontier” workshop was to identify key scientific objectives associated with innovative technology solutions along with associated timelines and costs for developments and implementation of this grandchallenge.

Applied antineutrino physics workshop

International Nuclear Information System (INIS)

Lund, James C.

2008-01-01

This workshop is the fourth one of a series that includes the Neutrino Geophysics Conference at Honolulu, Hawaii, which I attended in 2005. This workshop was organized by the Astro-Particle and Cosmology laboratory in the recently opened Condoret building of the University of Paris. More information, including copies of the presentations, on the workshop is available on the website: www.apc.univ-paris7.fr/AAP2007/. The workshop aims at opening neutrino physics to various fields such that it can be applied in geosciences, nuclear industry (reactor and spent fuel monitoring) and non-proliferation. The workshop was attended by over 60 people from Europe, USA, Asia and Brazil. The meeting was also attended by representatives of the Comprehensive nuclear-Test Ban Treaty (CTBT) and the International Atomic Energy Agency (IAEA). The workshop also included a workshop dinner on board of a river boat sailing the Seine river

Proceedings of the 12. Joint Workshop on Electron Cyclotron Emission and Electron Cyclotron Heating

International Nuclear Information System (INIS)

Giruzzi, Gerardo

2003-01-01

traditions and a format that has not changed substantially in the last few meetings, i.e., 3 and a half days including invited and oral presentations, poster sessions and a summary session. This is the list of the workshop series, compiled by Alan Costley: EC-1, Joint Workshop on ECE and X-ray diagnostics, Maryland, USA, 1979 (organizer: D.A. Boyd); EC-2, Joint Workshop on ECE and ECRH, Oxford, UK, 14-15 July, 1980 (A.E. Costley and A.C. Riviere); EC-3, Madison, USA, 9-11 September, 1982 (D.A. Boyd); EC-4, Frascati, Italy, 28-30 March, 1984 (P. Buratti and M. Bornatici); EC-5, San Diego, USA, 9-12 November, 1985 (R. Prater and J. Lohr); EC-6, Oxford, UK, 16-17 September, 1987 (A.E. Costley and A.C. Riviere); EC-7, Hefei, China, 9-11 May, 1989 (Wan Yuan Xi and A.E. Costley); EC-8, Gut Ising, Germany, 9-21 October, 1992 (H.J. Hartfuss and V. Erckmann); EC-9, Borrego Springs, USA, 23-26 January, 1995 (J. Lohr and T. Luce); EC-10, Ameland, The Netherlands, 6-11, April, 1997 (T. Donne and T. Verhoeven); EC-11, Oh-arai, Japan, 4-8 October, 1999 (T. Imai and K. Sakamoto); EC-12, Aix-en-Provence, France, 13-16 May, 2002 (G. Giruzzi, M. Lennholm, R. Magne). The next workshop of the series (probably called EC-13) will be organized by the Institute of Applied Physics, Russian Academy of Sciences, Nizhny Novgorod (Russia), in the spring 2004. Professor Alexander Litvak has accepted to chair both the Local Organizing Committee and the International Programme Committee. (author)

Belgian Workshop (November 2003) - Executive Summary and International Perspective

International Nuclear Information System (INIS)

2004-01-01

The fourth workshop of the OECD/NEA Forum on Stakeholder Confidence (FSC) was hosted by ONDRAF/NIRAS, the Belgian Agency for Radioactive Waste Management and enriched fissile materials. The central theme of the workshop was 'Dealing with interests, values and knowledge in managing risk' within the Belgian context of local partnerships for the long term management of low-level, short-lived radioactive waste. The four-day workshop started with a half-day session in Brussels giving a general introduction on the Belgian context and the local partnership methodology. This was followed by community visits to three local partnerships, PaLoFF in Fleurus-Farciennes, MONA in Mol, and STOLA in Dessel. After the visits, the workshop continued with two full-day sessions in Brussels. One hundred and nineteen registered participants, representing 13 countries, attended the workshop or participated in the community visits. About two thirds were Belgian stakeholders; the remainder came from FSC member organisations. The participants included representatives of municipal governments, civil society organisations, government agencies, industrial companies, the media, and international organisations as well as private citizens, consultants and academics. The four-day meeting was structured as follows: Day 1 morning was devoted to introductory presentations. Information was given on the general radioactive waste management context in Belgium. Regarding the management of LLW, and in particular the search for a disposal facility site, the workshop heard about the local partnership methodology developed by university researchers of the University of Antwerp and the Fondation Universitaire Luxembourgeoise (FUL). These partnerships between the potential host municipalities and the radwaste agency have the mission to develop an integrated facility proposal adapted to local conditions. Community visits took place on Day 1 afternoon and Day 2. Visits offered an opportunity for

DC electric springs with DC/DC converters

DEFF Research Database (Denmark)

Wang, Qingsong; Cheng, Ming; Jiang, Yunlei

2016-01-01

The concept of DC electric spring (DCES) was recently proposed to solve the stability issue caused by integrating intermittent renewable energy sources (RESs) to DC microgrids. In this paper, a new topology of DCES is proposed based on DC/DC converters. The proposed DCES consists of a bi-directio......The concept of DC electric spring (DCES) was recently proposed to solve the stability issue caused by integrating intermittent renewable energy sources (RESs) to DC microgrids. In this paper, a new topology of DCES is proposed based on DC/DC converters. The proposed DCES consists of a bi...... and/or constant discharging for batteries is adopted and four operating modes are analyzed as charging-positive, charging-negative, discharging-positive and discharging-negative modes. An additional mechanism for fast charging or fast discharging is also designed to secure normal operation...... of batteries. With the proposed DCES, the power fluctuations due to intermittent RESs can be passed to non-critical loads (NCLs) and batteries while power on critical loads (CLs) is kept stable. This is possibly the first attempt to design a DCES with only DC/DC converters. The performances of the proposed...

The 2007 ESO Instrument Calibration Workshop

CERN Document Server

Kaufer, Andreas; ESO Workshop

2008-01-01

The 2007 ESO Instrument Calibration workshop brought together more than 120 participants with the objective to a) foster the sharing of information, experience and techniques between observers, instrument developers and instrument operation teams, b) review the actual precision and limitations of the applied instrument calibration plans, and c) collect the current and future requirements by the ESO users. These present proceedings include the majority of the workshop’s contributions and document the status quo of instrument calibration at ESO in large detail. Topics covered are: Optical Spectro-Imagers, Optical Multi-Object Spectrographs, NIR and MIR Spectro-Imagers, High-Resolution Spectrographs, Integral Field Spectrographs, Adaptive Optics Instruments, Polarimetric Instruments, Wide Field Imagers, Interferometric Instruments as well as other crucial aspects such as data flow, quality control, data reduction software and atmospheric effects. It was stated in the workshop that "calibration is a life-long l...

Voluntary simulation workshops in nursing education

DEFF Research Database (Denmark)

Selberg, Hanne; Nielsen, Mette Elisabeth

-10) was conducted immediately after the workshops with the purpose of evaluating students` self-perception of learning outcomes. Furthermore, the questionnaires included open ended qualitative questions with a formative design aiming at students´ judgment of the content and set up of the simulation workshops...... Results 97 students (response rate 82,2%) assessed their theoretical outcome on a 10 point scale with a mean score of 7,55 (SD 1,96), practical skills outcome mean 8,07 (SD 1,96), integration of theory and practice mean 8,27 (SD 1,62), general outcome mean 8,36 (SD 1,57) and outcome from simulation...... with more theory and less practical training have resulted in discussions regarding the lack of practical skills amongst novice nurses. A Danish study of students’ drop-out from the nursing education indicates that difficulties in combining theory and practice are one of the motivating factors behind...

Ephemeroptera, Plecoptera and Trichoptera in springs in Trentino (south-eastern Alps

Directory of Open Access Journals (Sweden)

Luana SILVERI

2011-09-01

Full Text Available Within the CRENODAT project (Biodiversity assessment and integrity evaluation of springs of Trentino - Italian Alps - and longterm ecological research, 2004-2008 we studied a total of 90 springs in Trentino (south-eastern Alps, Italy, 75 of which were used for statistical analysis. The springs were grouped into seven different types and represented all the available lithologies in the study area. Macrozoobenthos (Ephemeroptera, Plecoptera and Trichoptera; EPT was collected from stones, bryophytes and sediments. We investigated which physical, chemical or environmental features were important in determining EPT assemblage metrics at sites, by calculating the Shannon-Wiener diversity index, and applying a one-way ANOVA test, ANOSIM and SIMPER analyses. Statistical results highlighted the island character of the springs, each spring having its specific history and abiotic characteristics, which select for unique community patterns. For the faunistic analyses, we considered all springs where EPT taxa were recorded; a total of 88 taxa. Highest species richness was recorded among the Trichoptera, followed by the Plecoptera and Ephemeroptera, with 52, 30 and 6 taxa respectively. Fifteen Trichoptera and three Plecoptera species were recorded as new for the Autonomous Province of Trento. Our results confirm that, in the harsh environment of the Alps, the mild and stable ecological conditions that characterize spring-fed brooks contribute to maintaining and enhancing the regional biodiversity. Springs act as refuge areas for stream biota, providing more favourable conditions during spates or droughts (common in Alpine headwaters, or for particular stages of the insect life cycles. Springs also provide specific habitats for strictly crenobiontic species.

Proceedings First Workshop on Architectures, Languages and Paradigms for IoT

OpenAIRE

Pianini, Danilo; Salvaneschi, Guido

2018-01-01

The 1st workshop on Architectures, Languages and Paradigms for IoT (ALP4IoT 2017), was held in Turin on September 19th, 2017. ALP4IoT was a satellite event of the 13th International Conference on integrated Formal Methods (iFM 2017). The workshop aimed at critically reviewing the state-of-the-art and the state-of-the-practice of formal techniques and software methods for the IoT, presenting open problems and challenges and triggering a discussion among the participants with different views an...

Peer-Review Writing Workshops in College Courses: Students’ Perspectives about Online and Classroom Based Workshops

Directory of Open Access Journals (Sweden)

Erin B. Jensen

2016-11-01

Full Text Available Peer-review workshops are commonly used in writing courses as a way for students to give their peers feedback as well as help their own writing. Most of the research on peer-review workshops focuses on workshops held in traditional in-person courses, with less research on peer-review workshops held online. Students in a freshman writing course experienced both a classroom based writing workshop and an online workshop and then took a survey about their experiences. The majority of the students preferred the online writing workshop because of the convenience of the workshop and being able to post anonymous reviews. Students whom preferred the traditional in-person writing workshop liked being able to talk with their peers about their papers. This research article focuses on the students’ responses and experiences with traditional and online peer-reviews.

ICP-MS Workshop

Energy Technology Data Exchange (ETDEWEB)

Carman, April J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Eiden, Gregory C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2014-11-01

This is a short document that explains the materials that will be transmitted to LLNL and DNN HQ regarding the ICP-MS Workshop held at PNNL June 17-19th. The goal of the information is to pass on to LLNL information regarding the planning and preparations for the Workshop at PNNL in preparation of the SIMS workshop at LLNL.

A study on the characteristics of the spacer spring by finite element method

Energy Technology Data Exchange (ETDEWEB)

Park, Sung Keun; Kim, Hyung Kyu; Kim, Kyu Tae [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

1995-06-01

The mechanical integrity of spacer springs in KOFA was certified through the mechanical tests by KWU. In this report, the spacer spring characteristics were obtained by using a commercial FEM code ANSYS, and the calculated results were compared with the mechanical test results. It has been found that the analytical results from ANSYS were in good agreement with the test results in the actual working range of the spacer springs even though some errors occurred in the range of initial spring deflection. The errors were thought to occur due to the simplified boundary conditions and the nominal dimensions which are used in calculations rather than the as-fabricated dimensions. Though the results from ANSYS are not fully satisfied, the analytical method in this report has been verified to be used as a method for investigating the characteristic of spacer springs roughly before conducting mechanical tests. 8 tabs., 25 figs (Author) .new.

78 FR 33849 - Battery-Powered Medical Devices Workshop: Challenges and Opportunities; Public Workshop; Request...

Science.gov (United States)

2013-06-05

... after the public workshop on the Internet at http://www.fda.gov/MedicalDevices/NewsEvents/Workshops..., compact, and mobile, the number of battery-powered medical devices will continue to increase. While many...] Battery-Powered Medical Devices Workshop: Challenges and Opportunities; Public Workshop; Request for...

Workshop: Preventing Air Pollution-related Cardiopulmonary Illnesses: Innovative, Cross-disciplinary Solutions

Science.gov (United States)

On Sept. 28-29, 2016 in Washington, DC, EPA’s held its first workshop to share multi-stakeholder perspectives on how to improve cardiopulmonary health outcomes through the integration of environmental health, public health, health care services, data.

The Halden Reactor Project workshop meeting on human centred automation and function allocation methods

International Nuclear Information System (INIS)

Sebok, Angelia; Green, Marit; Larsen, Marit; Miberg, Ann Britt; Morisseau, Dolores

1998-02-01

A workshop on Human Centred Automation (HCA) and Function Allocation Methods was organised in Halden, September 29-30, 1997. The purpose of the workshop was to discuss and make recommendations on requirements for the Halden Project research agenda. The workshop meeting began with several presentations summarising current issues in HCA, Function Allocation Methods and Functional Modelling. Invited speakers presented their research or modelling efforts. Following the presentations, the workshop was divided into three working groups, all tasked with answering the same four questions: (1) What are the most important issues in Human Centred Automation? (2) Which strengths could be achieved by integrating Functional Modelling Methods into experimental Human Centred Automation research? (3) How should analytical and experimental methods be balanced? (4) What are the most important aspects in automation design methodology? Each group discussed the questions and produced specific recommendations that were summarised by the group's facilitator in a joint session of the workshop. (author)

Workshop Proceedings

DEFF Research Database (Denmark)

2012-01-01

, the main focus there is on spoken languages in their written and spoken forms. This series of workshops, however, offers a forum for researchers focussing on sign languages. For the third time, the workshop had sign language corpora as its main topic. This time, the focus was on the interaction between...... corpus and lexicon. More than half of the papers presented contribute to this topic. Once again, the papers at this workshop clearly identify the potentials of even closer cooperation between sign linguists and sign language engineers, and we think it is events like this that contribute a lot to a better...

The Workshop Program on Authentic Assessment for Science Teachers

Science.gov (United States)

Rustaman, N. Y.; Rusdiana, D.; Efendi, R.; Liliawati, W.

2017-02-01

A study on implementing authentic assessment program through workshop was conducted to investigate the improvement of the competence of science teachers in designing performance assessment in real life situation at school level context. A number of junior high school science teachers and students as participants were involved in this study. Data was collected through questionnaire, observation sheets, and pre-and post-test during 4 day workshop. This workshop had facilitated them direct experience with seventh grade junior high school students during try out. Science teachers worked in group of four and communicated each other by think-pair share in cooperative learning approach. Research findings show that generally the science teachers’ involvement and their competence in authentic assessment improved. Their knowledge about the nature of assessment in relation to the nature of science and its instruction was improved, but still have problem in integrating their design performance assessment to be implemented in their lesson plan. The 7th grade students enjoyed participating in the science activities, and performed well the scientific processes planned by group of science teachers. The response of science teachers towards the workshop was positive. They could design the task and rubrics for science activities, and revised them after the implementation towards the students. By participating in this workshop they have direct experience in designing and trying out their ability within their professional community in real situation towards their real students in junior high school.

Workshop report

African Journals Online (AJOL)

abp

2017-09-14

Sep 14, 2017 ... health: report of first EQUIST training workshop in Nigeria .... The difference between the before and after measurements was ... After the administration of the pre-workshop questionnaire the ... represent Likert rating scale of 1-5 points, where 1point = grossly .... Procedures Manual for the "Evaluating.

Outcomes of the 'Data Curation for Geobiology at Yellowstone National Park' Workshop

Science.gov (United States)

Thomer, A.; Palmer, C. L.; Fouke, B. W.; Rodman, A.; Choudhury, G. S.; Baker, K. S.; Asangba, A. E.; Wickett, K.; DiLauro, T.; Varvel, V.

2013-12-01

The continuing proliferation of geological and biological data generated at scientifically significant sites (such as hot springs, coral reefs, volcanic fields and other unique, data-rich locales) has created a clear need for the curation and active management of these data. However, there has been little exploration of what these curation processes and policies would entail. To that end, the Site-Based Data Curation (SBDC) project is developing a framework of guidelines and processes for the curation of research data generated at scientifically significant sites. A workshop was held in April 2013 at Yellowstone National Park (YNP) to gather input from scientists and stakeholders. Workshop participants included nine researchers actively conducting geobiology research at YNP, and seven YNP representatives, including permitting staff and information professionals from the YNP research library and archive. Researchers came from a range of research areas -- geology, molecular and microbial biology, ecology, environmental engineering, and science education. Through group discussions, breakout sessions and hands-on activities, we sought to generate policy recommendations and curation guidelines for the collection, representation, sharing and quality control of geobiological datasets. We report on key themes that emerged from workshop discussions, including: - participants' broad conceptions of the long-term usefulness, reusability and value of data. - the benefits of aggregating site-specific data in general, and geobiological data in particular. - the importance of capturing a dataset's originating context, and the potential usefulness of photographs as a reliable and easy way of documenting context. - researchers' and resource managers' overlapping priorities with regards to 'big picture' data collection and management in the long-term. Overall, we found that workshop participants were enthusiastic and optimistic about future collaboration and development of community

Antibullying workshops: shaping minority nursing leaders through curriculum innovation.

Science.gov (United States)

Egues, Aida L; Leinung, Elaine Z

2014-01-01

Bullying is a phenomenon that threatens nurse recruitment and retention. As such, nurse educators should be called upon to innovatively create ethical and safe informative and practice spaces for the development and socialization of future practicing nurses. Creation of such spaces would be especially important for learners of minority background needed to help care for our nation's growing populations. A variety of theory-driven strategies were employed to construct innovative workshops as part of teaching methodology for undergraduate nursing curriculum at a designated Hispanic- and minority-serving college. Nursing faculty provided the workshops in concert with mentored nursing student scholars who were likewise interested in bullying cessation. Surveys from 230 nursing student participants in workshops revealed a 10-33% increase in self-reported identification of various facets of the bullying phenomenon. Students' narrative reflections revealed personal experiences with bullying, a raised awareness of its phenomenon, and an improved dedication to ending bullying. Nurse educators can help influence antibullying awareness through workshops integrated into their program of study. This innovative curriculum strategy demonstrates nurse educator commitment to antibullying that is focused on guiding and promoting the advocacy of educational, leadership, and professional opportunities and skills growth for minority nursing student scholars. © 2014 Wiley Periodicals, Inc.

Fifth International Workshop on Sharing and Reusing Architectural Knowledge (SHARK 2010)

NARCIS (Netherlands)

Lago, Patricia; Avgeriou, Paris; Kruchten, Philippe

2010-01-01

Architectural Knowledge (AK) is defined as the integrated representation of the software architecture of a software-intensive system or family of systems along with architectural decisions and their rationale, external influence and the development environment. The SHARK workshop series focuses on

Proceedings of the 3rd World Congress on Integrated Computational Materials Engineering (ICME 2015). Held in Colorado Springs, CO on May 31-June 4, 2015

Science.gov (United States)

2016-06-28

Xin Sun - Proceedings 5f. WORK UNIT NUMBER 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) 8. PERFORMING ORGANIZATION The Minerals Metals...on Integrated Computational Materials Engineering (ICME) was organized by The Minerals , Metals, and Materials Society (TMS) and held in Colorado...Springs, Colorado from May 31- June 4, 2015. ONR support in the an1otmt of$15,000 was provided to support the planning , execution, and dissemination of

Directions and dilemmas in massage therapy research: a workshop report from the 2009 north american research conference on complementary and integrative medicine.

Science.gov (United States)

Moyer, Christopher A; Dryden, Trish; Shipwright, Stacey

2009-06-29

Massage therapy (MT) is widely used and expanding rapidly, but systematic research on its mechanisms and effects has, in contrast with many other therapeutic fields, a short history. To take stock of the current state of MT research and to explore approaches, directions, and strategies with the potential to make the next two decades of MT research optimally productive. The 2009 North American Research Conference on Complementary and Integrative Medicine held in Minneapolis, Minnesota. Using a modified Delphi method, the study authors led an interactive workshop that aimed to identify established MT research findings, needed MT research, weaknesses and limitations in currently available MT research, and directions to pursue in the next two decades of MT research. The thirty-seven conference attendees-including MT researchers, educators, and practitioners, and other health care practitioners who already work interprofessionally with MT-actively participated in the workshop and ensured that a diversity of perspectives were represented. The MT field has made rapid and laudable progress in its short history, but at the same time this short history is probably the main reason for most of the current shortcomings in MT research. Drawing on a diversity of backgrounds, workshop participants identified many opportunities and strategies for future research. Though lost time can never be recovered, the field's late start in research should not be allowed to be a demoralizing handicap to progress. Modern scientific methods and technologies, applied to the range of directions and dilemmas highlighted in this report, can lead to impressive progress in the next twenty years of MT research.

Addressing Professionalism, Social, and Communication Competencies in Surgical Residency Via Integrated Humanities Workshops: A Pilot Curriculum.

Science.gov (United States)

Colvin, Jennifer; French, Judith; Siperstein, Allan; Capizzani, Tony R; Krishnamurthy, Vikram D

We aimed to conduct professionalism and social competencies (PSC) training by integrating humanities into structured workshops, and to assess reception of this curriculum by first-year surgical residents. An IRB-approved, pilot curriculum consisting of 4 interactive workshops for surgical interns was developed. The workshops were scheduled quarterly, often in small group format, and supplemental readings were assigned. Humanities media utilized to illustrate PSC included survival scenarios, reflective writing, television portrayals, and social media. Emphasis was placed on recognizing personal values and experiences that influence judgment and decision-making, using social media responsibly, identifying and overcoming communication barriers related to generational changes in training (especially technology and work-life balance), and tackling stereotypes of surgeons. Anonymous and voluntary pre- and postcurriculum surveys were administered. Univariate analysis of responses was performed with JMP Pro v12 using Fisher's exact, χ 2 , and Students' t-tests for categorical and continuous variables. The study took place at the Cleveland Clinic in Cleveland, OH, within the general surgery program. Surgical interns at the Cleveland Clinic were included in the study. A total of 16 surgical interns completed the curriculum. Sixteen surgical interns participated in the curriculum: 69% were domestic medical school graduates (DG) and 31% were international medical school graduates (IMG). Overall, the majority (81%) of residents had received PSC courses during medical school: 100% of DG compared to 40% of IMG (p = 0.02). Before beginning the curriculum, 86% responded that additional PSC training would be useful during residency, which increased to 94% upon completion (p = 0.58). Mean number of responses supporting the usefulness of PSC training increased from 1.5 ± 0.2 before the curriculum to 1.75 ± 0.2 upon completion (p = 0.4). When describing public and medical student

Workshops as a Research Methodology

DEFF Research Database (Denmark)

Ørngreen, Rikke; Levinsen, Karin Tweddell

2017-01-01

, and workshops as a research methodology. Focusing primarily on the latter, this paper presents five studies on upper secondary and higher education teachers’ professional development and on teaching and learning through video conferencing. Through analysis and discussion of these studies’ findings, we argue......This paper contributes to knowledge on workshops as a research methodology, and specifically on how such workshops pertain to e-learning. A literature review illustrated that workshops are discussed according to three different perspectives: workshops as a means, workshops as practice...... that workshops provide a platform that can aid researchers in identifying and exploring relevant factors in a given domain by providing means for understanding complex work and knowledge processes that are supported by technology (for example, e-learning). The approach supports identifying factors...

Mercury content in Hot Springs

Energy Technology Data Exchange (ETDEWEB)

Nakagawa, R

1974-01-01

A method of determination of mercury in hot spring waters by flameless atomic absorption spectrophotometry is described. Further, the mercury content and the chemical behavior of the elementary mercury in hot springs are described. Sulfide and iodide ions interfered with the determination of mercury by the reduction-vapor phase technique. These interferences could, however, be minimized by the addition of potassium permanganate. Waters collected from 55 hot springs were found to contain up to 26.0 ppb mercury. High concentrations of mercury have been found in waters from Shimoburo Springs, Aomori (10.0 ppb), Osorezan Springs, Aomori (1.3 approximately 18.8 ppb), Gosyogake Springs, Akita (26.0 ppb), Manza Springs, Gunma (0.30 approximately 19.5 ppb) and Kusatu Springs, Gunma (1.70 approximately 4.50 ppb). These hot springs were acid waters containing a relatively high quantity of chloride or sulfate.

Failure analysis of top nozzle holddown spring screw for nuclear fuel assembly

International Nuclear Information System (INIS)

Koh, S. K.; Ryu, C. H.; Na, E. G.; Baek, T. H.; Jeon, K. L.

2003-01-01

A failure analysis of holddown spring screw was performed using fracture mechanics approach. The spring screw was designed such that it was capable of sustaining the loads imposed by the initial tensile preload and operational loads. In order to investigate the cause of failure, a stress analysis of the top nozzle spring assembly was done using finite element analysis and a life prediction of the screw was made using a fracture mechanics approach. The elastic-plastic finite element analysis showed that the local stresses at the critical regions of head-shank fillet and thread root significantly exceeded than the yield strength of the screw material, resulting in local plastic deformation. Primary water stress corrosion cracking life of the Inconel 600 screw was predicted by using integration of the Scott model and resulted in 1.42 years, which was fairly close to the actual service life of the holddown spring screw

Discovery of the Potential Role of Sensors in a Personal Emergency Response System: What Can We Learn from a Single Workshop?

Directory of Open Access Journals (Sweden)

Femke De Backere

2015-12-01

Full Text Available Capturing knowledge from domain experts is important to effectively integrate novel technological support in existing care processes. In this paper, we present our experiences in using a specific type of workshop, which we identified as a decision-tree workshop, to determine the process and information exchange during the usage of a Personal Emergency Response System (PERS. We conducted the workshop with current and possible future users of a PERS system to investigate the potential of context- and social awareness for such a system. We discuss the workshop format as well as the results and reflection on this workshop.

Workshop meeting

International Nuclear Information System (INIS)

Veland, Oeystein

2004-04-01

1-2 September 2003 the Halden Project arranged a workshop on 'Innovative Human-System Interfaces and their Evaluation'. This topic is new in the HRP 2003-2005 programme, and it is important to get feedback from member organizations to the work that is being performed in Halden. It is also essential that relevant activities and experiences in this area from the member organizations are shared with the Halden staff and other HRP members. Altogether 25 persons attended the workshop. The workshop had a mixture of presentations and discussions, and was chaired by Dominique Pirus of EDF, France. Day one focused on the HRP/IFE activities on Human-System Interface design, including Function-oriented displays, Ecological Interface Design, Task-oriented displays, as well as work on innovative display solutions for the oil and gas domain. There were also presentations of relevant work in France, Japan and the Czech Republic. The main focus of day two was the verification and validation of human-system interfaces, with presentations of work at HRP on Human-Centered Validation, Criteria-Based System Validation, and Control Room Verification and Validation. The chairman concluded that it was a successful workshop, although one could have had more time for discussions. The Halden Project got valuable feedback and viewpoints on this new topic during the workshop, and will consider all recommendations related to the future work in this area. (Author)

Mutual Workshops enhancing Curriculum Integration

DEFF Research Database (Denmark)

Bjerregaard Jensen, Lotte; Markvorsen, Steen; Almegaard, Henrik

2011-01-01

. A course in material science was moved from the fourth to the first semester so that the project could be informed by material science. A new course in geometry was prepared and software that could facilitate an integrated design project was introduced (STAAD Pro). The ‘full package’ of the new third....... Every semester has a teaching team consisting of all the teachers for courses in that semester. Each semester also has its own theme and a multidisciplinary, joint project. So the most active members of the teaching team, of course, are those responsible for courses that address the theme and contribute...... to the joint project. The theme of the third semester is ‘structural design’. Structural design is defined as an integration of material science, statics and geometry in relation to an architectural project. Anticipating the implementation of CDIO and this theme, major changes were made to the curriculum...

Proceedings of the OECD/NEA workshop on the relations between seismological data and seismic engineering

International Nuclear Information System (INIS)

2003-01-01

The Committee on the Safety of Nuclear Installations (CSNI) of the OECD-NEA co-ordinates the NEA activities concerning the technical aspects of design, construction and operation of nuclear installations insofar as they affect the safety of such installations. The Integrity and Ageing Working Group (IAGE WG) of the CSNI deals with the integrity of structures and components, and has three sub-groups, dealing with the integrity of metal components and structures, ageing of concrete structures, and the seismic behaviour of structures. The sub-group dealing with the seismic behaviour of structures proposed this workshop. The OECD-NEA workshop on the relations between seismological data and seismic engineering analyses was held on October 17-18, 2002. A field visits in the Izmit area where the fault scarp is still visible was organised on Wednesday October 16, 2002. The Ttirkiye Atom Enerjisi Kurumu, TAEK (Turkish Atomic Energy Agency) in Istanbul, Turkey, hosted the workshop. A recommendation of the OECD workshop on the engineering characterisation of seismic input (hosted by the United States Nuclear Regulatory Commission and organised by Brookhaven National Laboratory on November 15-17, 1999) was to foster the growth of interaction between 'design engineers' and 'ground motion specialists'. The objective of the Istanbul workshop is to address this recommendation. The workshop gave seismologists the opportunity to present observed damages and their related ground motions and design engineers the opportunity to present current techniques used in the evaluation of seismic hazards. Bridging the gap between these two fields was a key objective - this workshop was a forum for bringing together the two communities. In addition, the location of the workshop was particularly interesting and provided possibilities for several of the host country participants to discuss the 1999 Kocaeli earthquake. On the basis of lessons learned from large earthquakes over the last decade, the

Connecting Mathematics and Writing Workshop: It's Kinda like Ice Skating

Science.gov (United States)

Carter, Susan

2009-01-01

Second-grade students struggle with writing about mathematical topics during math class, so the teacher begins to integrate mathematical topics into their Writing Workshop. Content journals are used during math, and students are encouraged to write about personal connections to mathematical situations, as well as incorporate mathematical concepts…

The Third Pacific Basin Biofuels Workshop: Proceedings

Science.gov (United States)

Among the many compelling reasons for the development of biofuels on remote Pacific islands, several of the most important include: (1) a lack of indigenous fossil fuels necessitates their import at great economic loss to local island economics, (2) ideal conditions for plant growth exist on many Pacific islands to produce yields of biomass feedstocks, (3) gaseous and liquid fuels such as methane, methanol and ethanol manufactured locally from biomass feedstocks are the most viable alternatives to gasoline and diesel fuels for transportation, and (4) the combustion of biofuels is cleaner than burning petroleum products and contributes no net atmospheric CO2 to aggravate the greenhouse effect and the subsequent threat of sea level rise to low islands. Dr. Vic Phillips, HNEI Program Manager of the Hawaii Integrated Biofuels Research Program welcomed 60 participants to the Third Pacific Basin Biofuels Workshop at the Sheraton Makaha Hotel, Waianae, Oahu, on March 27 and 28, 1989. The objectives of the workshop were to update progress since the Second Pacific Basin Biofuels Workshop in April 1987 and to develop a plan for action for biofuels R and D, technology transfer, and commercialization now (immediate attention), in the near-term (less than two years), in the mid-term (three to five years), and in the long-term (more than six years). An emerging theme of the workshop was how the production, conversion, and utilization of biofuels can help increase environmental and economic security locally and globally. Individual papers are processed separately for the data base.

REPORT OF ON-SITE INSPECTION WORKSHOP-16

Energy Technology Data Exchange (ETDEWEB)

Sweeney, J J

2009-07-07

The central issue addressed by this workshop was the task of making the on-site inspection (OSI) part of the Comprehensive Nuclear-Test-Ban Treaty verification system operationally ready at entry into force of the Treaty. It is recognized, and this was emphasized by the 2008 OSI Integrated Field Exercise (IFE), that it is not possible to develop every part of the OSI regime simultaneously. Therefore, it is necessary to prioritize the approach to OSI readiness. The reviews of the IFE have pointed to many elements of OSI readiness that still need development. The objective of this workshop was to provide priorities for the path forward for Working Group B to consider. Several critical areas have been identified that are related to the development of OSI readiness: (1) Technology development: Priorities are radionuclide and noble gas sampling and analysis, visual observation, multispectral/infrared imaging methods, active seismic methods and the recognition of the importance of signatures. (2) Organizational development: Priorities are health and safety, the Operations Support Centre, the Equipment Storage and Maintenance Facility, information technology data flow and communications. (3) Resources: The expertise to develop key parts of the OSI regime is not available within the current OSI Division staff. To develop these aspects of the regime will require more staff or supplements to the staff with cost-free experts or other means. Aspects of the system that could benefit from more staff include radionuclide and noble gas detection methods, data flow and communications, visual observation, multispectral/infrared methods and health and safety. As the path forward, participants of this workshop recognized a need to optimize the development of OSI priorities. The outcome of this workshop is to suggest for consideration an operational approach to OSI readiness that utilizes results of an evaluation of the relative effectiveness of OSI elements versus their relative

Groundwater monitoring strategies at the Weldon Spring site, Weldon Spring, Missouri

International Nuclear Information System (INIS)

Meyer, K.A. Jr.

1988-01-01

This paper presents groundwater monitoring strategies at the Weldon Spring Site in east-central Missouri. The Weldon Spring Site is former ordnance works and uranium processing facility. In 1987, elevated levels of inorganic anions and nitroaromatics were detected in groundwater beneath the site. Studies are currently underway to characterize the hydrogeologic regime and to define groundwater contamination. The complex hydrogeology at the Weldon Spring Site requires innovative monitoring strategies. Combinations of fracture and conduit flow exist in the limestone bedrock. Perched zones are also present near surface impoundments. Losing streams and springs surround the site. Confronting this complex combination of hydrogeologic conditions is especially challenging

Workshops Without Walls: broadening access to science around the world.

Directory of Open Access Journals (Sweden)

Betül K Arslan

2011-08-01

Full Text Available The National Aeronautics and Space Administration (NASA Astrobiology Institute (NAI conducted two "Workshops Without Walls" during 2010 that enabled global scientific exchange--with no travel required. The second of these was on the topic "Molecular Paleontology and Resurrection: Rewinding the Tape of Life." Scientists from diverse disciplines and locations around the world were joined through an integrated suite of collaborative technologies to exchange information on the latest developments in this area of origin of life research. Through social media outlets and popular science blogs, participation in the workshop was broadened to include educators, science writers, and members of the general public. In total, over 560 people from 31 US states and 30 other nations were registered. Among the scientific disciplines represented were geochemistry, biochemistry, molecular biology and evolution, and microbial ecology. We present this workshop as a case study in how interdisciplinary collaborative research may be fostered, with substantial public engagement, without sustaining the deleterious environmental and economic impacts of travel.

Proceedings of the waste recycling workshop

Energy Technology Data Exchange (ETDEWEB)

Bailey, R.E.; Thomas, A.F.; Ries, M.A. [eds.] [Ohio State Univ., Columbus, OH (United States)

1993-12-31

Recorded are seventeen talks from five sessions at the workshop. FERMCO`s recycling program, state of the art recycling technology, and an integrated demonstration of deactivation, decommissioning and decommissioning are presented in the plenary session. In the concrete session, decontamination and recycling are discussed. In the transite session, regulations are considered along with recycling and decontamination. In the metals session, radioactive scrap metals are emphasized. And in the regulatory considerations and liabilities session, DOE and EPA viewpoints are discussed. (GHH)

Design Considerations for Optimized Lateral Spring Structures for Wearable Electronics

KAUST Repository

Hussain, Aftab M.

2016-03-07

The market for wearable electronics has been gaining momentum in the recent years. For completely electronic wearable textiles with integrated sensors, actuators, computing units and communication circuitry, it is important that there is significant stretchability. This stretchability can be obtained by introducing periodic stretchable structures between the electronic circuits. In this work, we derive the equations and constraints governing the stretchability in horseshoe lateral spring structures. We have derived the optimum design and the parameters therein, to help develop the best spring structures for a given stretchability. We have also developed a figure of merit, called area efficiency of stretchability, to compare all twodimensional stretchable systems. Finally, we experimentally verify the validity of our equations by fabricating a metal/polymer bilayer thin film based stretchable horseshoe lateral spring structures. We obtain a stretchability of 1.875 which is comparable to the theoretical maxima of 2.01 for the given parameters.

Design Considerations for Optimized Lateral Spring Structures for Wearable Electronics

KAUST Repository

Hussain, Aftab M.; Hussain, Muhammad Mustafa

2016-01-01

The market for wearable electronics has been gaining momentum in the recent years. For completely electronic wearable textiles with integrated sensors, actuators, computing units and communication circuitry, it is important that there is significant stretchability. This stretchability can be obtained by introducing periodic stretchable structures between the electronic circuits. In this work, we derive the equations and constraints governing the stretchability in horseshoe lateral spring structures. We have derived the optimum design and the parameters therein, to help develop the best spring structures for a given stretchability. We have also developed a figure of merit, called area efficiency of stretchability, to compare all twodimensional stretchable systems. Finally, we experimentally verify the validity of our equations by fabricating a metal/polymer bilayer thin film based stretchable horseshoe lateral spring structures. We obtain a stretchability of 1.875 which is comparable to the theoretical maxima of 2.01 for the given parameters.

Visit to valuable water springs. 22. ; Kanazawa spring and springs at the mountain flank of Iwate volcano. Meisui wo tazunete. 22. ; Kanazawa shimizu to Iwate sanroku yusuigun

Energy Technology Data Exchange (ETDEWEB)

Itadera, K. (Kanagawa Hot Springs Research Institute, Kanagawa (Japan)); Shimano, Y. (Utsunomiya Bunsei Junior College, Tochigi (Japan))

1993-06-30

This paper describes the following matters on the springs at the mountain flank of Iwate volcano in Iwate Prefecture, with the Kanazawa spring as the main subject: The new and old Iwate volcanos have rock-bed flow deposits which resulted from mountain disintegration, distributed over their south, east and north flanks, and most of the spring water wells up in these areas; the south, east and north flanks have about 80 springs, about 30 springs, and about 10 springs, respectively; the number of springs and the water well-up scale show a trend of inverse proportion; the Kanazawa spring is a generic name of the several springs located on the north flank in the Kanazawa area; its main spring forms a spring pond with an area of about 100 m[sup 2] with a spring water temperature of about 11.5[degree]C, electric conductivity of 200 [mu] S/cm or higher, and a flow-out rate of 500 l/s or more; the Kanazawa spring is characterized by having as large total dissolved component amount as 170 mg/l or more and abundant amount of SO4[sup 2-] and Cl[sup -]; and the spring presents properties different from those in other springs. 10 refs., 5 figs., 1 tab.

[Reform steps toward networking sheltered workshops and the general labour market].

Science.gov (United States)

Wendt, S

2010-02-01

Only 0.16% of disabled employees are enabled to change from sheltered workshops to the general labour market. At the same time the number of disabled employees in sheltered workshops is increasing more than anticipated. Investigations into the growing admissions to sheltered workshops resulted in recommendations to improve the practice of change over. More and more admissions of students having finished special schools could be reduced by improved cooperation between special schools and the local employment market. Special schools should offer suitable job trainings and support students to develop an understanding of the requirements of specific jobs and of their opportunities to develop their skills to do these jobs. In 2009, supported employment has been regulated in social security law, lasting up to three years and aimed at qualifying disabled youngsters for employment in the general labour market instead of entering sheltered workshops. The majority of admissions to sheltered workshops in the meantime concern people with psychological handicaps, with more than 30% however leaving the workshops later on. For this population, "virtual sheltered workshops" are offering more suitable means for reintegration in the general labour market, such as temporary employment in the general labour market or in occupations with small earnings. The personal budget for work is meant to be a model project within the German Länder, to transfer personal support from the sheltered workshop into the general labour market. The conference of German Länder Ministers of Social Affairs has been active since 2007 to develop a concept for reform of the social security law concerning integration assistance for disabled people, which in future is to concentrate on individual needs, removal of obstacles in the law to facilitate the transition from sheltered workshops into the general labour market. The "Deutsche Verein für öffentliche und private Fürsorge" (German association for public

Integrating topography, hydrology and rock structure in weathering rate models of spring watersheds

NARCIS (Netherlands)

Pacheco, F.A.L.; Weijden, C.H. van der

2012-01-01

Weathering rate models designed for watersheds combine chemical data of discharging waters with morphologic and hydrologic parameters of the catchments. At the spring watershed scale, evaluation of morphologic parameters is subjective due to difficulties in conceiving the catchment geometry.

Getting started with Spring Framework a hands-on guide to begin developing applications using Spring Framework

CERN Document Server

Sharma, J

2016-01-01

Getting started with Spring Framework is a hands-on guide to begin developing applications using Spring Framework. The examples (consisting of 74 sample projects) that accompany this book are based on Spring 4.3 and Java 8. You can download the examples described in this book from the following GitHub project:github.com/getting-started-with-spring/3rdEdition This book is meant for Java developers with little or no knowledge of Spring Framework. Getting started with Spring Framework, Third Edition has been updated to reflect changes in Spring 4.3 and also includes new chapters on Java-based configuration and Spring Data (covers Spring Data JPA and Spring Data MongoDB projects). The existing chapters have been revised to include information on Java-based configuration. The book also includes some new information on bean definition profiles, importing application context XML files, lazy autowiring, creating custom qualifier annotations, JSR 349 annotations, spring-messaging module, Java 8's Optional type, and s...

The source, discharge, and chemical characteristics of water from Agua Caliente Spring, Palm Springs, California

Science.gov (United States)

Contributors: Brandt, Justin; Catchings, Rufus D.; Christensen, Allen H.; Flint, Alan L.; Gandhok, Gini; Goldman, Mark R.; Halford, Keith J.; Langenheim, V.E.; Martin, Peter; Rymer, Michael J.; Schroeder, Roy A.; Smith, Gregory A.; Sneed, Michelle; Martin, Peter

2011-01-01

Agua Caliente Spring, in downtown Palm Springs, California, has been used for recreation and medicinal therapy for hundreds of years and currently (2008) is the source of hot water for the Spa Resort owned by the Agua Caliente Band of the Cahuilla Indians. The Agua Caliente Spring is located about 1,500 feet east of the eastern front of the San Jacinto Mountains on the southeast-sloping alluvial plain of the Coachella Valley. The objectives of this study were to (1) define the geologic structure associated with the Agua Caliente Spring; (2) define the source(s), and possibly the age(s), of water discharged by the spring; (3) ascertain the seasonal and longer-term variability of the natural discharge, water temperature, and chemical characteristics of the spring water; (4) evaluate whether water-level declines in the regional aquifer will influence the temperature of the spring discharge; and, (5) estimate the quantity of spring water that leaks out of the water-collector tank at the spring orifice.

Integrating IMS Learning Design and IMS Question and Test Interoperability using CopperCore Service Integration

NARCIS (Netherlands)

Vogten, Hubert; Martens, Harrie; Nadolski, Rob; Tattersall, Colin; Van Rosmalen, Peter; Koper, Rob

2006-01-01

Please, cite this publication as: Vogten, H., Martens, H., Nadolski, R., Tattersall, C., van Rosmalen, P., & Koper, R. (2006). Integrating IMS Learning Design and IMS Question and Test Interoperability using CopperCore Service Integration. Proceedings of International Workshop in Learning Networks

Spring plant phenology and false springs in the conterminous US during the 21st century

Science.gov (United States)

Allstadt, Andrew J.; Vavrus, Stephen J.; Heglund, Patricia J.; Pidgeon, Anna M.; Thogmartin, Wayne E.; Radeloff, Volker C.

2015-01-01

The onset of spring plant growth has shifted earlier in the year over the past several decades due to rising global temperatures. Earlier spring onset may cause phenological mismatches between the availability of plant resources and dependent animals, and potentially lead to more false springs, when subsequent freezing temperatures damage new plant growth. We used the extended spring indices to project changes in spring onset, defined by leaf out and by first bloom, and predicted false springs until 2100 in the conterminous United States (US) using statistically-downscaled climate projections from the Coupled Model Intercomparison Project 5 ensemble. Averaged over our study region, the median shift in spring onset was 23 days earlier in the Representative Concentration Pathway 8.5 scenario with particularly large shifts in the Western US and the Great Plains. Spatial variation in phenology was due to the influence of short-term temperature changes around the time of spring onset versus season long accumulation of warm temperatures. False spring risk increased in the Great Plains and portions of the Midwest, but remained constant or decreased elsewhere. We conclude that global climate change may have complex and spatially variable effects on spring onset and false springs, making local predictions of change difficult.

Reactor simulator development. Workshop material

International Nuclear Information System (INIS)

2001-01-01

The International Atomic Energy Agency (IAEA) has established a programme in nuclear reactor simulation computer programs to assist its Member States in education and training. The objective is to provide, for a variety of advanced reactor types, insight and practice in reactor operational characteristics and their response to perturbations and accident situations. To achieve this, the IAEA arranges for the supply or development of simulation programs and training material, sponsors training courses and workshops, and distributes documentation and computer programs. This publication consists of course material for workshops on development of such reactor simulators. Participants in the workshops are provided with instruction and practice in the development of reactor simulation computer codes using a model development system that assembles integrated codes from a selection of pre-programmed and tested sub-components. This provides insight and understanding into the construction and assumptions of the codes that model the design and operational characteristics of various power reactor systems. The main objective is to demonstrate simple nuclear reactor dynamics with hands-on simulation experience. Using one of the modular development systems, CASSIM tm , a simple point kinetic reactor model is developed, followed by a model that simulates the Xenon/Iodine concentration on changes in reactor power. Lastly, an absorber and adjuster control rod, and a liquid zone model are developed to control reactivity. The built model is used to demonstrate reactor behavior in sub-critical, critical and supercritical states, and to observe the impact of malfunctions of various reactivity control mechanisms on reactor dynamics. Using a PHWR simulator, participants practice typical procedures for a reactor startup and approach to criticality. This workshop material consists of an introduction to systems used for developing reactor simulators, an overview of the dynamic simulation

Feasibility study for remedial action for the Quarry Residuals Operable Unit at the Weldon Spring Site, Weldon Spring, Missouri

International Nuclear Information System (INIS)

1998-03-01

The U.S. Department of Energy (DOE) is conducting cleanup activities at the Weldon Spring site, which is located in St. Charles County, Missouri, about 48 km (30 mi) west of St. Louis (Figure 1.1). Cleanup of the Weldon Spring site consists of several integrated components. The quarry residuals operable unit (QROU) is one of four operable units being evaluated. In accordance with the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA), as amended, a remedial investigation/feasibility study (RI/FS) is being conducted to evaluate conditions and potential responses for the following areas and/or media that constitute the QROU: (1) the residual material (soil and sediment) remaining at the Weldon Spring quarry after removal of the bulk waste (about 11 million L [3 million gal] of uranium-contaminated ponded water was also addressed previous to bulk waste removal); (2) other media located in the surrounding vicinity of the quarry, including adjacent soil, surface water, and sediment in Femme Osage Slough and several creeks; and (3) quarry groundwater located primarily north of Femme Osage Slough. Potential impacts to the St. Charles County well field downgradient of the quarry area are also being addressed as part of QROU RI/FS evaluations. For remedial action sites, it is DOE policy to integrate values associated with the National Environmental Policy Act (NEPA) into the CERCLA decision-making process. The analyses contained herein address NEPA values as appropriate to the actions being considered for the QROU. A work plan summarizing initial site conditions and providing conceptual site hydrogeological and exposure models was published in January 1994. The RI and baseline risk assessment (BRA) reports have been completed. The RI discusses in detail the nature and extent and the fate and transport of contamination at the quarry area

Feasibility study for remedial action for the Quarry Residuals Operable Unit at the Weldon Spring Site, Weldon Spring, Missouri

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

The U.S. Department of Energy (DOE) is conducting cleanup activities at the Weldon Spring site, which is located in St. Charles County, Missouri, about 48 km (30 mi) west of St. Louis (Figure 1.1). Cleanup of the Weldon Spring site consists of several integrated components. The quarry residuals operable unit (QROU) is one of four operable units being evaluated. In accordance with the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA), as amended, a remedial investigation/feasibility study (RI/FS) is being conducted to evaluate conditions and potential responses for the following areas and/or media that constitute the QROU: (1) the residual material (soil and sediment) remaining at the Weldon Spring quarry after removal of the bulk waste (about 11 million L [3 million gal] of uranium-contaminated ponded water was also addressed previous to bulk waste removal); (2) other media located in the surrounding vicinity of the quarry, including adjacent soil, surface water, and sediment in Femme Osage Slough and several creeks; and (3) quarry groundwater located primarily north of Femme Osage Slough. Potential impacts to the St. Charles County well field downgradient of the quarry area are also being addressed as part of QROU RI/FS evaluations. For remedial action sites, it is DOE policy to integrate values associated with the National Environmental Policy Act (NEPA) into the CERCLA decision-making process. The analyses contained herein address NEPA values as appropriate to the actions being considered for the QROU. A work plan summarizing initial site conditions and providing conceptual site hydrogeological and exposure models was published in January 1994. The RI and baseline risk assessment (BRA) reports have been completed. The RI discusses in detail the nature and extent and the fate and transport of contamination at the quarry area.

2014 Penn State Bioinorganic Workshop

Energy Technology Data Exchange (ETDEWEB)

Golbeck, John [Pennsylvania State Univ., State College, PA (United States)

2015-10-01

The 3rd Penn State Bioinorganic Workshop took place in early June 2014 and was combined with the 3rd Penn State Frontiers in Metallobiochemistry Symposium. The workshop was even larger than the 2nd Penn State Bioinorganic Workshop we offered in 2012. It had even more participants (162 rather than 123 in 2012). Like the 2012 workshop, the 2014 workshop had three parts. The first part consisted of 16 90-minute lectures presented by faculty experts on the topic of their expertise (see below). Based on the suggestions from the 2012 workshop, we have recorded all 16 lectures professionally and make them available to the entire bioinorganic community via online streaming. In addition, hard copies of the recordings are available as backup.

AECB workshop on seismic hazard assessment in Southern Ontario. Recorded proceedings

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-12-31

A workshop on seismic hazard assessment in southern Ontario was conducted on June 19-21, 1995. The purpose of the workshop was to review available geological and seismological data which could affect earthquake occurrence in southern Ontario and to develop a consensus on approaches that should be adopted for characterization of seismic hazard. The workshop was structured in technical sessions to focus presentations and discussions on four technical issues relevant to seismic hazard in southern Ontario, as follows: The importance of geological and geophysical observations for the determination of seismic sources; Methods and approaches which may be adopted for determining seismic sources based on integrated interpretations of geological and seismological information. Methods and data which should be used for characterizing the seismicity parameters of seismic sources. Methods for assessment of vibratory ground motion hazard. This document presents transcripts from recordings made of the presentations and discussion from the workshop. It will be noted, in some sections of the document, that the record is incomplete. This is due in part to recording equipment malfunction and in part due to the poor quality of recording obtained for certain periods.

AECB workshop on seismic hazard assessment in Southern Ontario. Recorded proceedings

International Nuclear Information System (INIS)

1995-01-01

A workshop on seismic hazard assessment in southern Ontario was conducted on June 19-21, 1995. The purpose of the workshop was to review available geological and seismological data which could affect earthquake occurrence in southern Ontario and to develop a consensus on approaches that should be adopted for characterization of seismic hazard. The workshop was structured in technical sessions to focus presentations and discussions on four technical issues relevant to seismic hazard in southern Ontario, as follows: The importance of geological and geophysical observations for the determination of seismic sources; Methods and approaches which may be adopted for determining seismic sources based on integrated interpretations of geological and seismological information. Methods and data which should be used for characterizing the seismicity parameters of seismic sources. Methods for assessment of vibratory ground motion hazard. This document presents transcripts from recordings made of the presentations and discussion from the workshop. It will be noted, in some sections of the document, that the record is incomplete. This is due in part to recording equipment malfunction and in part due to the poor quality of recording obtained for certain periods

A study on mechanical properties and flow-induced vibrations of coil-shaped holddown spring

International Nuclear Information System (INIS)

Kim, Kyu-Tae

2010-01-01

The fuel assemblies used in the OPR1000s in Korea employ four coil-shaped hold-down springs to exert compressive load at the top of fuel assembly so that the assemblies may not be damaged by preventing its hydraulic-induced lifting-off from its lower seating surface. However, the coolant flow generates the flow-induced vibration at the coil-shaped hold-down springs which may cause wear on the spring surfaces. A hold-own spring may be fractured if torsional stress acting on its worn area exceeds a stress limit, resulting in the loss of hold-down spring force of the fuel assembly. In this paper, flow-induced vibration tests were performed for standard and improved coil type hold-down springs to investigate the effects of these two hold-down spring designs on flow-induced vibration wear. In parallel, a wide spectrum of mechanical tests was performed to obtain vibration-related characteristics of these two hold-down springs, which can be used as input data for the fuel assembly static and dynamic analysis. It is found that the improved hold-down spring design is better against flow-induced vibration wear than the standard one. With the use of the three-dimensional Solidwork model, the stress-related design lifetime of the improved hold-down spring was estimated by extrapolating its wear data measured from the flow-induced vibration tests, which indicates that the improved HD spring design will maintain integrity during the fuel design lifetime in OPR1000s in Korea.

The QED Workshop

Energy Technology Data Exchange (ETDEWEB)

Pieper, G.W.

1994-07-01

On May 18--20, 1994, Argonne National Laboratory hosted the QED Workshop. The workshop was supported by special funding from the Office of Naval Research. The purpose of the workshop was to assemble of a group of researchers to consider whether it is desirable and feasible to build a proof-checked encyclopedia of mathematics, with an associated facility for theorem proving and proof checking. Among the projects represented were Coq, Eves, HOL, ILF, Imps, MathPert, Mizar, NQTHM, NuPrl, OTTER, Proof Pad, Qu-Prolog, and RRL. Although the content of the QED project is highly technical rigorously proof-checked mathematics of all sorts the discussions at the workshop were rarely technical. No prepared talks or papers were given. Instead, the discussions focused primarily on such political, sociological, practical, and aesthetic questions, such as Why do it? Who are the customers? How can one get mathematicians interested? What sort of interfaces are desirable? The most important conclusion of the workshop was that QED is an idea worthy pursuing, a statement with which virtually all the participants agreed. In this document, the authors capture some of the discussions and outline suggestions for the start of a QED scientific community.

Next Generation Safeguards Initiative Workshop on Enhanced Recruiting for International Safeguards

International Nuclear Information System (INIS)

Pepper, S.E.; Rosenthal, M.D.; Fishbone, L.G.; Occhogrosso, D.M.; Lockwood, D.; Carroll, C.J.; Dreicer, M.; Wallace, R.; Fankhauser, J.

2009-01-01

Brookhaven National Laboratory (BNL) hosted a Workshop on Enhanced Recruiting for International Safeguards October 22 and 23, 2008. The workshop was sponsored by DOE/NA-243 under the Next Generation Safeguards Initiative (NGSI). Placing well-qualified Americans in sufficient number and in key safeguards positions within the International Atomic Energy Agency's (IAEA's) Department of Safeguards is an important U.S. non-proliferation objective. The goal of the NGSI Workshop on Enhanced Recruiting for International Safeguards was to improve U.S. efforts to recruit U.S. citizens for IAEA positions in the Department of Safeguards. The participants considered the specific challenges of recruiting professional staff, safeguards inspectors, and managers. BNL's International Safeguards Project Office invited participants from the U.S. Department of Energy, the IAEA, U.S. national laboratories, private industry, academia, and professional societies who are either experts in international safeguards or who understand the challenges of recruiting for technical positions. A final report for the workshop will be finalized and distributed in early 2009. The main finding of the workshop was the need for an integrated recruitment plan to take into account pools of potential candidates, various government and private agency stakeholders, the needs of the IAEA, and the NGSI human capital development plan. There were numerous findings related to and recommendations for maximizing the placement of U.S. experts in IAEA Safeguards positions. The workshop participants offered many ideas for increasing the pool of candidates and increasing the placement rate. This paper will provide details on these findings and recommendations

Next Generation Safeguards Initiative Workshop on Enhanced Recruiting for International Safeguards

Energy Technology Data Exchange (ETDEWEB)

Pepper,S.E.; Rosenthal, M.D.; Fishbone, L.G.; Occhogrosso, D.M.; Lockwood, D.; Carroll, C.J.; Dreicer, M.; Wallace, R.; Fankhauser, J.

2009-07-12

Brookhaven National Laboratory (BNL) hosted a Workshop on Enhanced Recruiting for International Safeguards October 22 and 23, 2008. The workshop was sponsored by DOE/NA-243 under the Next Generation Safeguards Initiative (NGSI). Placing well-qualified Americans in sufficient number and in key safeguards positions within the International Atomic Energy Agency’s (IAEA’s) Department of Safeguards is an important U.S. non-proliferation objective. The goal of the NGSI Workshop on Enhanced Recruiting for International Safeguards was to improve U.S. efforts to recruit U.S. citizens for IAEA positions in the Department of Safeguards. The participants considered the specific challenges of recruiting professional staff, safeguards inspectors, and managers. BNL’s International Safeguards Project Office invited participants from the U.S. Department of Energy, the IAEA, U.S. national laboratories, private industry, academia, and professional societies who are either experts in international safeguards or who understand the challenges of recruiting for technical positions. A final report for the workshop will be finalized and distributed in early 2009. The main finding of the workshop was the need for an integrated recruitment plan to take into account pools of potential candidates, various government and private agency stakeholders, the needs of the IAEA, and the NGSI human capital development plan. There were numerous findings related to and recommendations for maximizing the placement of U.S. experts in IAEA Safeguards positions. The workshop participants offered many ideas for increasing the pool of candidates and increasing the placement rate. This paper will provide details on these findings and recommendations

Fusion Simulation Project Workshop Report

Science.gov (United States)

Kritz, Arnold; Keyes, David

2009-03-01

The mission of the Fusion Simulation Project is to develop a predictive capability for the integrated modeling of magnetically confined plasmas. This FSP report adds to the previous activities that defined an approach to integrated modeling in magnetic fusion. These previous activities included a Fusion Energy Sciences Advisory Committee panel that was charged to study integrated simulation in 2002. The report of that panel [Journal of Fusion Energy 20, 135 (2001)] recommended the prompt initiation of a Fusion Simulation Project. In 2003, the Office of Fusion Energy Sciences formed a steering committee that developed a project vision, roadmap, and governance concepts [Journal of Fusion Energy 23, 1 (2004)]. The current FSP planning effort involved 46 physicists, applied mathematicians and computer scientists, from 21 institutions, formed into four panels and a coordinating committee. These panels were constituted to consider: Status of Physics Components, Required Computational and Applied Mathematics Tools, Integration and Management of Code Components, and Project Structure and Management. The ideas, reported here, are the products of these panels, working together over several months and culminating in a 3-day workshop in May 2007.

URBAN ATMOSPHERIC OBSERVATORY (UAO) FIRST PLANNING WORKSHOP, JANUARY 27-28-2003. WORKSHOP SUMMARY.

Energy Technology Data Exchange (ETDEWEB)

REYNOLDS,R.M.; LEE,H.N.

2003-03-27

The Urban Atmospheric Observatory (UAO) First Planning Workshop was held on 27-28 January 2003 at the Environmental Measurements Laboratory (EML) in downtown Manhattan, New York City. The meeting was well attended by local, state, and national administrators, as well as scientists and engineers from the national laboratories and academia. The real-time intensive UAO is a necessary step toward the development and validation of new technologies in support of the New York City emergency management and anti-terrorism effort. The real-time intensive UAO will be a dense array of meteorological instrumentation, remote sensing and satellite products and model output, as well as radiation detection, gamma spectrometer and aerosol measurements focused onto a small area in the heart of Manhattan. Such a test-bed, developed in a somewhat homogeneous urban area, and with a well-developed communication and data collection backbone, will be of immense utility for understanding how models of all scales can be improved and how they can best be integrated into the city's emergency program. The goal of the First Planning Workshop was to bring together a small group of experts in the fields of urban meteorology, modeling from mesoscale to fine-mesh computational fluid dynamics, instrumentation, communications and visualization, in order to (1) establish the importance of the observational program, (2) define the most efficient and cost-effective design for the program, (3) define needed intensive observational efforts and establish a schedule, and (4) define the importance of the UAO in emergency operations. The workshop achieved its goals with the enthusiastic participation of over forty persons. There was a synthesis of ideas towards a world-class facility that would benefit both immediate emergency management activities and, over an extended time, the entire field of urban meteorology and contaminant dispersion modeling.

European Union regulators and industry agree on improving specific environmental release categories: Report from the exchange network for exposure scenarios specific environmental release category workshop on May 13, 2016.

Science.gov (United States)

Ahrens, Andreas; Moilanen, Marianne; Martin, Sara; Garcia-John, Enrique; Sättler, Daniel; Bakker, Joost; Reihlen, Antonia; Wind, Thorsten; Tolls, Johannes

2017-09-01

Specific environmental release categories (SPERCs) are an instrument for lower-tier environmental emissions assessments. They support chemical safety assessments under the European Union (EU) regulation Registration, Evaluation, Authorisation, and Restriction of Chemicals. SPERCs have been developed by industry and subjected to regulatory review. Within the framework of the Chemical Safety Report/Exposure Scenario Roadmap, the EU Chemicals Agency (ECHA), the EU Member State authorities, and European industry sector associations collaborate to improve the quality of the SPERCs. Following up on the outcome of ECHA's SPERC Best Practice Project, industry, together with ECHA, developed an updated SPERC factsheet template and guidance on how to fill it out. In addition, industry developed 2 sets of SPERC factsheet examples and the corresponding SPERC background documents. These documents were submitted to a multistakeholder review process. The comments from the review were discussed at a workshop in spring 2016. The workshop participants acknowledged the revised factsheet format including the corresponding guidance, the 2 SPERC factsheets, and the 2 SPERC background documents as best practice examples. The package is expected to support further improvement of the quality of the SPERCs. A common understanding was achieved of the need to match the level of detail of the use conditions description with the risk to be controlled (i.e., the emission intensity and hazard profile of the substances) and with the level of conservatism of SPERC release factors. The complete and transparent documentation of the derivation of the release factors and of their conservatism is conceived as crucial for the credibility of the SPERCs, such that they can be trusted by partners in the chemicals supply chain and by regulators. To that end, background documents will include a dedicated section describing the conservatism of SPERCs. The workshop concluded with an outline of the practical way

International workshop on chromosome 3. Final report, April 15, 1991--April 14, 1992

Energy Technology Data Exchange (ETDEWEB)

Gemmill, R.M.

1992-07-01

The Second Workshop on Human Chromosome 3 was held on April 4--5, 1991 at Denver, Colorado. There were 43 participants representing 8 nations. The workshop participants reviewed the current state of the chromosome 3 map, both physical and genetic, and prepared lists of markers and cell lines to be made commonly available. These markers and cell lines should be incorporated into the mapping efforts of diverse groups to permit the integration of data and development of consensus maps at future workshops. Region specific efforts were described for sections of the chromosome harboring genes thought to be involved in certain diseases including Von Hippel-Lindau disease, 3p-syndrome, lung cancer and renal cancer. Selected papers have been processed separately for inclusion in the Energy Science and Technology Database.

Ground water monitoring strategies at the Weldon Spring Site, Weldon Spring, Missouri

International Nuclear Information System (INIS)

Meyer, K.A. Jr.

1988-01-01

This paper presents ground water monitoring strategies at the Weldon Spring Site in east-central Missouri. The Weldon Spring Site is a former ordnance works and uranium processing facility. In 1987, elevated levels of inorganic anions and nitroaromatics were detected in ground water beneath the site. Studies are currently underway to characterize the hydrogeologic regime and to define ground water contamination. The complex hydrogeology at the Weldon Spring Site requires innovative monitoring strategies. Combinations of fracture and conduit flow exist in the limestone bedrock. Perched zones are also present near surface impoundments. Losing streams and springs surround the site. Solving this complex combination of hydrogeologic conditions is especially challenging

9{sup th} international workshop on large-scale integration of wind power into power systems as well as on transmission networks for offshore wind power plants. Proceedings

Energy Technology Data Exchange (ETDEWEB)

Betancourt, Uta; Ackermann, Thomas (eds.)

2010-07-01

Within the 9th International Workshop on large-scale integration of wind power into power systems as well as on transmission networks for offshore wind power plants at 18th to 19th October, 2010 in Quebec (Canada), lectures and poster papers were presented to the following themes: (1) Keynote session and panel; (2) European grid integration studies; (3) Modeling; (4) Wind forecasting; (5) North American grid integration studies; (6) Voltage stability and control; (7) Grid codes and impact studies; (8) Canadian University research (WESNet); (9) Operation and dispatch; (9) Offshore wind power plants; (10) Frequency Control; (11) Methodologies to estimate wind power impacts on power systems, summaries from IEAWIND collaboration; (12) HVDC; (13) Grid codes and system impact studies; (14) Modeling and validation; (15) Regulations, markets and offshore wind energy; (16) Integration issues; (17) Wind turbine control system; (18) Energy management and IT solutions.

Optimum Design of a Coil Spring for Improving the Performance of a Spring -Operated Mechanism

International Nuclear Information System (INIS)

Lee, Dae Woo; Sohn, Jeong Hyun; Yoo, Wan Suk

2016-01-01

In this study, a release test bed is designed to evaluate the dynamic behaviors of a coil spring. From the release tests, the dynamic behaviors of a coil spring are analyzed. A lumped parameter spring model was established for numerical simulation of a spring. The design variables of a coil spring are optimized by using the design of experiments approach. Two-level factorial designs are used for the design optimization, and the primary effects of the design variables are analyzed. Based on the results of the interaction analysis and design sensitivity analysis, the level of the design variables is rearranged. Finally, the mixed-level factorial design is used for the optimum design process. According to the optimum design of the opening spring, the dynamic performance of the spring-operated mechanism increases by 2.90

Alternate fusion fuels workshop

International Nuclear Information System (INIS)

1981-06-01

The workshop was organized to focus on a specific confinement scheme: the tokamak. The workshop was divided into two parts: systems and physics. The topics discussed in the systems session were narrowly focused on systems and engineering considerations in the tokamak geometry. The workshop participants reviewed the status of system studies, trade-offs between d-t and d-d based reactors and engineering problems associated with the design of a high-temperature, high-field reactor utilizing advanced fuels. In the physics session issues were discussed dealing with high-beta stability, synchrotron losses and transport in alternate fuel systems. The agenda for the workshop is attached

From the theory to practice: Five years of urban regeneration workshops

Directory of Open Access Journals (Sweden)

Raimundo Bambó-Naya

2018-05-01

Full Text Available The aim of this communication is to present the experience of four academic courses in the subject of Integrated Urban and Landscape Design, taught in the framework of the Master in Architecture of the School of Engineering and Architecture of the University of Zaragoza. It addresses urban regeneration interventions in vulnerable areas of the consolidated city with approaches to teaching innovation in the academic field and in the topic of user participation. The workshop methodology is explained in detail, paying more attention to the process followed than to the specific results of the workshop. The different stages of the process are presented: previous phase and selection of the study area, phase of analysis and diagnosis, phase of proposals, where a joint work is carried out with vision of action in the whole of the neighbourhood, and phase of presentation of the results to the Neighbours. Finally, some future challenges of this workshop are outlined.

The New Zealand Goethermal Workshop, 1979, Part 2

Energy Technology Data Exchange (ETDEWEB)

None

1979-01-01

The New Zealand Geothermal Workshop took place on 29th-31st October 1979 at the University of Auckland. Over 100 participants were present (a list is included in this volume) with 6 overseas visitors, bring the number of countries represented (including the Institute's Fellows) to 14. Forty papers were presented over the three days of the meeting, together with 23 poster papers presented by the students of the Institute. This second Proceedings volume has been prepared as a supplement to the volume of conference papers distributed at the meeting, and was produced subsequent to the Workshop. The fist section of this volume includes additional papers presented at the meeting but not then available in printed form. The second part is a summary of the year's activities of the Geothermal Institute also presented in part at the meeting. These activities included some significant research contributions and original field investigations. Each fellow at the Institute was required as part of the course, to conduct an investigation and prepare a report which was presented at the Geothermal Workshop in a poster session. Abstracts of these project reports are included in this volume and five of the projects are reproduced in greater detail. Also included are outlines of the two original class projects conducted by the students and staff of the Institute, one a pre-feasibility study of the Ngawha Geothermal Field and the other an investigation of the Miranda Springs system. Finally, the lecture curriculum of the year's diploma course is presented in outline, together with the final examination papers. The two volumes of this document therefore include, as much as is possible within the restricted space, an overview of the Geothermal Institute's contribution to the development of geothermal energy together with a technical tribute to the many people involved in this very successful first year.

Emergency response workers workshop

International Nuclear Information System (INIS)

Agapeev, S.A.; Glukhikh, E.N.; Tyurin, R.L.

2012-01-01

A training workshop entitled Current issues and potential improvements in Rosatom Corporation emergency prevention and response system was held in May-June, 2012. The workshop combined theoretical training with full-scale practical exercise that demonstrated the existing innovative capabilities for radiation reconnaissance, diving equipment and robotics, aircraft, emergency response and rescue hardware and machinery. This paper describes the activities carried out during the workshop [ru

2015 Inverter Workshop | Photovoltaic Research | NREL

Science.gov (United States)

Inverter Workshop 2015 Inverter Workshop Wednesday, February 25, 2015 Chair: Jack Flicker In about inverters. This workshop represented a follow-on to the inverter workshops that Sandia National conversations between module and inverter experts. Agenda For a detailed schedule of the day's events, access

First International Workshop on Grid Simulator Testing of Wind Turbine Drivetrains: Workshop Proceedings

Energy Technology Data Exchange (ETDEWEB)

Gevorgian, V.; Link, H.; McDade, M.; Mander, A.; Fox, J. C.; Rigas, N.

2013-11-01

This report summarizes the proceedings of the First International Workshop on Grid Simulator Testing of Wind Turbine Drivetrains, held from June 13 to 14, 2013, at the National Renewable Energy Laboratory's National Wind Technology Center, located south of Boulder, Colorado. The workshop was sponsored by the U.S. Department of Energy and cohosted by the National Renewable Energy Laboratory and Clemson University under ongoing collaboration via a cooperative research and development agreement. The purpose of the workshop was to provide a forum to discuss the research, testing needs, and state-of-the-art apparatuses involved in grid compliance testing of utility-scale wind turbine generators. This includes both dynamometer testing of wind turbine drivetrains ('ground testing') and field testing grid-connected wind turbines. Four sessions followed by discussions in which all attendees of the workshop were encouraged to participate comprised the workshop.

Hot springs in Hokuriku District

Energy Technology Data Exchange (ETDEWEB)

Sato, K. (Hot Springs Research Center, Japan)

1971-01-01

In the Hokuriku district including Toyama, Ishikawa, and Fukui Prefectures, hot springs of more than 25/sup 0/C were investigated. In the Toyama Prefecture, there are 14 hot springs which are located in an area from the Kurobe River to the Tateyama volcano and in the mountainous area in the southwest. In Ishikawa Prefecture there are 16 hot springs scattered in Hakusan and its vicinity, the Kaga mountains, and in the Noto peninsula. In northern Fukui Prefecture there are seven hot springs. The hot springs in Shirakawa in Gifu Prefecture are characterized as acid springs producing exhalations and H/sub 2/S. These are attributed to the Quaternary volcanoes. The hot springs of Wakura, Katayamazu, and Awara in Ishikawa Prefecture are characterized by a high Cl content which is related to Tertiary andesite. The hot springs of Daishoji, Yamanaka, Yamashiro, Kuritsu, Tatsunokuchi, Yuwaku, and Yunotani are characterized by a low HCO/sub 3/ content. The Ca and SO/sub 4/ content decreases from east to west, and the Na and Cl content increases from west to east. These fluctuations are related to the Tertiary tuff and rhyolite. The hot springs of Kuronagi, Kinshu, and Babadani, located along the Kurobe River are characterized by low levels of dissolved components and high CO/sub 2/ and HCO/sub 3/ content. These trends are related to late Paleozoic granite. Hot springs resources are considered to be connected to geothermal resources. Ten tables, graphs, and maps are provided.

Passive base isolation with superelastic nitinol SMA helical springs

International Nuclear Information System (INIS)

Huang, Bin; Zhang, Haiyang; Wang, Han; Song, Gangbing

2014-01-01

Seismic isolation of structures such as multi-story buildings, nuclear reactors, bridges, and liquid storage tanks should be designed to preserve structural integrity. By implementing seismic isolation technology, the deformation of superstructures can be dramatically reduced, consequently helping to protect their safety as well. In this paper, an innovative type of passive base isolation system, which is mainly composed of superelastic nitinol SMA helical springs, is developed. In order to verify the effectiveness of the proposed system, a two-story experimental steel frame model is constructed, and two superelastic SMA helical springs are thermo-mechanically built in the laboratory. To describe the nonlinear mechanical properties of the superelastic SMA helical springs under reciprocating load, a phenomenological model is presented in terms of a series of tensile tests. Afterwards, a numerical model of the two-story frame with the suggested isolation system is set up to simulate the response of the isolated frame subjected to an earthquake. Both the experimental and the numerical simulation results indicate that the proposed base isolation system can remarkably suppress structural vibrations and has improved isolation effects when compared with a steel spring isolation system. Due to the capabilities of energy dissipation as well as fully re-centering, it is very applicable to utilize the suggested isolation system in base isolated structures to resist earthquakes. (paper)

Halden Reactor Project Workshop: Understanding Advanced Instrumentation and Controls Issues

International Nuclear Information System (INIS)

Beltracchi, L.

1991-01-01

A Halden Reactor Project Workshop on 'Understanding Advanced Instrumentation and Controls Issues' was held in Halden, Norway, during June 17-18, 1991. The objectives of the workshop were to (1) identify and prioritize the types of technical information that the Halden Project can produce to facilitate the development of man-machine interface guidelines and (2) to identify methods to effectively integrate and disseminate this information to signatory organizations. As a member of the Halden Reactor Project, the Nuclear Regulatory Commission (NRC) requested the workshop. This request resulted from the NRC's need for human factors guidelines for the evaluation of advanced instrumentation and controls. The Halden Reactor Project is a cooperative agreement among several countries belonging to the Organization for Economic Cooperation and Development (OECD). The US began its association with the Halden Project in 1958 through the Atomic Energy Commission. The project's activities are centered at the Halden heavy-water reactor and its associated man-machine laboratory in Halden, Norway. The research program conducted at Halden consists of studies on fuel performance and computer-based man-machine interfaces

Climate Research Roadmap Workshop: Summary Report, May 13-14, 2010

Energy Technology Data Exchange (ETDEWEB)

None

2010-09-01

In recognition of the ongoing advances and challenges of climate change research, DOE's Office of Biological and Environmental Research (BER) organized a workshop asking the scientific community to identify the current state of climate science. The goal of the workshop was to determine the research challenges important for developing a predictive understanding of global climate. Participants were asked to focus on interdisciplinary research that capitalized on BER's scientific strengths in Atmospheric System Research, Terrestrial Ecosystem Science, and Climate and Earth System Modeling. Approximately 50 scientists representing these three areas were asked to identify desired outcomes for the next 10 years. Goals were identified for the near (1--3 years), mid (4--7 years), and long term (8--10 years). Discussions were focused by discipline (atmospheric, terrestrial, and modeling) and by latitude (high, temperate, and tropical). In addition, opportunities and needs for integration across disciplines and latitudes were identified with a specific focus on crosscutting challenges and outcomes. BER will use this workshop output to update its strategic plan for climate research.

Tandem mirror theory workshop

International Nuclear Information System (INIS)

1981-05-01

The workshop was divided into three sections which were constituted according to subject matter: RF Heating, MHD Equilibrium and Stability, and Transport and Microstability. An overview from Livermore's point of view was given at the beginning of each session. Each session was assigned a secretary to take notes. These notes have been used in preparing this report on the workshop. The report includes the activities, conclusions, and recommendations of the workshop

A guide to guidelines for professional societies and other developers of recommendations: introduction to integrating and coordinating efforts in COPD guideline development. An official ATS/ERS workshop report.

Science.gov (United States)

Schünemann, Holger J; Woodhead, Mark; Anzueto, Antonio; Buist, A Sonia; Macnee, William; Rabe, Klaus F; Heffner, John

2012-12-01

Organizations around the world are recognizing that guidelines should be based on the best available evidence, that the development of recommendations needs to be transparent, and that appropriate processes should be followed. In June 2007, we convened an American Thoracic Society (ATS)/European Respiratory Society (ERS)-sponsored workshop with over 60 representatives from 36 international organizations to provide advice to guideline developers about the required steps and processes for guideline development using the management of chronic obstructive pulmonary disease (COPD) as an example. Following the workshop, participants completed a series of 14 review articles that underwent peer review and incorporated key new literature until June 2011 for most articles in this series. The review articles evaluate the guideline cycle including: priority setting, question formulation, managing conflict of interest, defining appropriate outcomes, stakeholder involvement, grading the quality of evidence and strength of recommendations, integration of values and preferences, considering resource use, reporting of guidelines, implementation, and adaptation. In this Introduction we frame the background and methods of these reviews and provide the key conclusions of the workshop. A summary of the workshop's conclusions and recommendations was published in The Lancet. Given the enormous resources that are spent on research and the importance of providing the best guidance to healthcare decision makers, attributing appropriate funds to research syntheses and transparent, independent guidance for the development of evidence-based guidelines is justified. Furthermore, given the immense amount of work that is required, individuals and organizations need to collaborate to achieve the best possible and cost-effective coordination of these efforts.

International cooperation workshop. Regional workshop for CTBTO international cooperation: Africa

International Nuclear Information System (INIS)

1999-08-01

Pursuant to the 1999 programme of work, and following the International Cooperation Workshop held in Vienna, Austria, in 1998, the Provisional Technical Secretariat (PTS) of the Preparatory Commission for the CTBTO (Prep Com) held a regional Workshop for CTBTO International Cooperation in Cairo. The purpose of the workshop was to identify how and by what means the Africa region can promote international cooperation in CTBT verification related technologies, and how the region can benefit from and contribute to Prep Com activity. PTS staff briefed the 40 participants from 22 African States who attended the Workshop on general aspects, including costs, of the establishment and operation of the CTBT verification system, including its four monitoring technologies. Participants were informed on opportunities for local institutions in the establishment of monitoring stations and on possible support for national and regional data centres. National experts presented their research and development activities and reviewed existing experiences on bi/multi-lateral cooperation. The main points of the discussion focused on the need to engage governments to advance signature/ratification, and further training opportunities for African states

75 FR 58411 - Center for Veterinary Medicine eSubmitter Workshop; Public Workshop; Request for Comments

Science.gov (United States)

2010-09-24

...] Center for Veterinary Medicine eSubmitter Workshop; Public Workshop; Request for Comments AGENCY: Food... Drug Administration (FDA) is announcing a public workshop entitled: ``Center for Veterinary Medicine... be emailed to all registrants. Contact Person: Charles Andres, Center for Veterinary Medicine (HFV...

Workshop for development of formal MC and A plans

International Nuclear Information System (INIS)

Erkkila, B.H.; Hatcher, C.R.; Scott, S.C.; Thomas, K.E.

1998-01-01

Upgrades to both physical protection and material controls and accountability (MC and A) are progressing at many nuclear facilities in the Russian Federation. In general, Russian facilities are well prepared to address issues related to physical protection. The infrastructure to plan and implement physical protection upgrades is already in place in Russia. The infrastructure to integrate new and existing MC and A capabilities is not as well developed. The authors experience has shown that working with Russian facility management and technical personnel to draft an MC and A plan provides a way of moving MC and A upgrades forward. Los Alamos has developed a workshop for Russian nuclear facilities to facilitate the preparation of their facility MC and A plans. The workshops have been successful in bringing together facility management, safeguards specialists, and operations personnel to initiate the process of drafting these MC and A plans. The MC and A plans provide the technical basis for scheduling future MC and A upgrades at the facilities. Although facility MC and A plans are site specific, the workshop can be tailored to guide the development of an MC and A plan for any Russian nuclear site

Network workshop

DEFF Research Database (Denmark)

Bruun, Jesper; Evans, Robert Harry

2014-01-01

This paper describes the background for, realisation of and author reflections on a network workshop held at ESERA2013. As a new research area in science education, networks offer a unique opportunity to visualise and find patterns and relationships in complicated social or academic network data....... These include student relations and interactions and epistemic and linguistic networks of words, concepts and actions. Network methodology has already found use in science education research. However, while networks hold the potential for new insights, they have not yet found wide use in the science education...... research community. With this workshop, participants were offered a way into network science based on authentic educational research data. The workshop was constructed as an inquiry lesson with emphasis on user autonomy. Learning activities had participants choose to work with one of two cases of networks...

Application of a nonlinear spring element to analysis of circumferentially cracked pipe under dynamic loading

International Nuclear Information System (INIS)

Olson, R.; Scott, P.; Wilkowski, G.M.

1992-01-01

As part of the US NRC's Degraded Piping Program, the concept of using a nonlinear spring element to simulate the response of cracked pipe in dynamic finite element pipe evaluations was initially proposed. The nonlinear spring element is used to represent the moment versus rotation response of the cracked pipe section. The moment-rotation relationship for the crack size and material of interest is determined from either J-estimation scheme analyses or experimental data. In this paper, a number of possible approaches for modeling the nonlinear stiffness of the cracked pipe section are introduced. One approach, modeling the cracked section moment rotation response with a series of spring-slider elements, is discussed in detail. As part of this discussion, results from a series of finite element predictions using the spring-slider nonlinear spring element are compared with the results from a series of dynamic cracked pipe system experiments from the International Piping Integrity Research Group (IPIRG) program

Proceedings of Wireless Technology in the Electric Power Industry Workshop

International Nuclear Information System (INIS)

2001-01-01

A one-day workshop was conducted at EPRI Charlotte to identify technology issues related to wireless technology in nuclear power plants. The meeting concluded with a roundtable discussion to determine what projects could be conducted to address opportunities and gaps in this technology; the three projects recommended for further investigation were a risk analysis, development of a technology strategy, and development of guidelines for reliable implementation of wireless technologies. The Proceedings CD includes workshop presentations in PowerPoint format. The presentations cover the following topics: (1) Wireless Project at TXU: Integration of Voice, Data, and Video; (2) Radio Upgrade Project at Public Service Electric and Gas Company (PSE and G) of New Jersey; and (3) Operational Experience with Wireless Communication at Nuclear Plants

IPCC workshop on socio-economic scenarios. Workshop report

Energy Technology Data Exchange (ETDEWEB)

Edenhofer, O.; Pichs-Madruga, R.; Sokona, Y. (and others)

2012-07-01

The goal of the IPCC Workshop on Socio-Economic Scenarios (WoSES) was to facilitate the development of socioeconomic narratives and pathways by the integrated assessment modelling, impacts, and adaptation communities. Describing these pathways and narratives is a core step to analyzing the interdependent issues of adaptation and mitigation in an integrated manner. The Workshop participants agreed that structured and consistent assessments of possible future impacts, vulnerabilities, adaptation, and mitigation would benefit from using shared qualitative narrative and quantitative descriptions of potential socioeconomic and ecosystem reference conditions that underlie challenges to mitigation and adaptation. These descriptions should be flexible enough to provide a framework for comparison within which regional or local studies of adaptation and vulnerability could build their own narratives. The defining socioeconomic conditions of these scenarios are designated Shared Socioeconomic reference Pathways (SSPs). The SSPs define the state of human and natural societies at a macro scale and have two elements: a narrative storyline and a set of quantified measures that define the high-level state of society as it evolves over the 21st century under the assumption of no significant climate change. This assumption defines the SSPs as a baseline independent of climate change projections. The set of SSPs was chosen to characterize the range of uncertainty in mitigation efforts required to achieve particular radiative forcing pathways, in adaptation efforts that could be undertaken to prepare for and respond to the climate change associated with those pathways, and in residual impacts. This will allow assessment of scenarios along two axes: socioeconomic challenges to mitigation, and socioeconomic challenges to adaptation. This conceptualization of SSPs allows them to be combined with different degrees of anthropogenic interference with the climate system (measured in terms of

Spheres of discharge of springs

Science.gov (United States)

Springer, Abraham E.; Stevens, Lawrence E.

2009-02-01

Although springs have been recognized as important, rare, and globally threatened ecosystems, there is as yet no consistent and comprehensive classification system or common lexicon for springs. In this paper, 12 spheres of discharge of springs are defined, sketched, displayed with photographs, and described relative to their hydrogeology of occurrence, and the microhabitats and ecosystems they support. A few of the spheres of discharge have been previously recognized and used by hydrogeologists for over 80 years, but others have only recently been defined geomorphologically. A comparison of these spheres of discharge to classification systems for wetlands, groundwater dependent ecosystems, karst hydrogeology, running waters, and other systems is provided. With a common lexicon for springs, hydrogeologists can provide more consistent guidance for springs ecosystem conservation, management, and restoration. As additional comprehensive inventories of the physical, biological, and cultural characteristics are conducted and analyzed, it will eventually be possible to associate spheres of discharge with discrete vegetation and aquatic invertebrate assemblages, and better understand the habitat requirements of rare or unique springs species. Given the elevated productivity and biodiversity of springs, and their highly threatened status, identification of geomorphic similarities among spring types is essential for conservation of these important ecosystems.

Science for Society Workshop Summary Report

Energy Technology Data Exchange (ETDEWEB)

Wolfe, Amy K [ORNL; Bjornstad, David J [ORNL; Lenhardt, W Christopher [ORNL; Shumpert, Barry L [ORNL; Wang, Stephanie [ORNL

2012-02-01

Science for Society, a workshop held at the Oak Ridge National Laboratory (ORNL) on September 27, 20111, explored ways to move Laboratory science toward use. It sought actionable recommendations. Thus the workshop focused on: (1) current practices that promote and inhibit the translation of science into use, (2) principles that could lead to improving ORNL's translational knowledge and technology transfer efforts, and (3) specific recommendations for making these principles operational. This highly interactive workshop struck a positive chord with participants, a group of 26 ORNL staff members from diverse arenas of science and technology (S and T), technology transfer, and external laboratory relations, who represented all levels of science, technology, and management. Recognizing that the transformation of fundamental principles into operational practices often follows a jagged path, the workshop sought to identify key choices that could lead to a smoother journey along this path, as well as choices that created roadblocks and bottlenecks. The workshop emphasized a portion of this pathway, largely excluding the marketplace. Participants noted that research translation includes linkages between fundamental and applied research and development (R and D), and is not restricted to uptake by manufacturers, consumers, or end users. Three crosscutting ideas encapsulate workshop participants observations: (1) ORNL should take more action to usher the translation of its S and T products toward use, so as to make a positive national and global impact and to enhance its own competitiveness in the future; (2) ORNL (and external entities such as DOE and Congress) conveys inconsistent messages with regard to the importance of research translation and application, which (a) creates confusion, (b) poses disincentives to pursue research translation, (c) imposes barriers that inhibit cross-fertilization and collaboration, and (d) diminishes the effectiveness of both the

The Astronomy Workshop

Science.gov (United States)

Hamilton, D. P.; Asbury, M. L.; Proctor, A.

2001-12-01

The Astronomy Workshop (http://janus.astro.umd.edu) is an interactive online astronomy resource developed, and maintained at the University of Maryland, for use by students, educators and the general public. The Astronomy Workshop has been extensively tested and used successfully at many different levels, including High School and Junior High School science classes, University introductory astronomy courses, and University intermediate and advanced astronomy courses. Some topics currently covered in the Astronomy Workshop are: Animated Orbits of Planets and Moons: The orbits of the nine planets and 91 known planetary satellites are shown in animated, to-scale drawings. The orbiting bodies move at their correct relative speeds about their parent, which is rendered as an attractive, to-scale gif image. Solar System Collisions: This most popular of our applications shows what happens when an asteroid or comet with user-defined size and speed impacts a given planet. The program calculates many effects, including the country impacted (if Earth is the target), energy of the explosion, crater size, magnitude of the planetquake generated. It also displays a relevant image (e.g. terrestrial crater, lunar crater, etc.). Planetary and Satellite Data Calculators: These tools allow the user to easily calculate physical data for all of the planets or satellites simultaneously, making comparison very easy. Orbital Simulations: These tools allow the student to investigate different aspects of the three-body problem of celestial mechanics. Astronomy Workshop Bulletin Board: Get innovative teaching ideas and read about in-class experiences with the Astronomy Workshop. Share your ideas with other educators by posting on the Bulletin Board. Funding for the Astronomy Workshop is provided by the National Science Foundation.

Innovative confinement concepts workshop

International Nuclear Information System (INIS)

Kirkpatrick, R.C.

1998-01-01

The Innovative Confinement Concepts Workshop occurred in California during the week preceding the Second Symposium on Current Trends in International Fusion Research. An informal report was made to the Second Symposium. A summary of the Workshop concluded that some very promising ideas were presented, that innovative concept development is a central element of the restructured US DOE. Fusion Energy Sciences program, and that the Workshop should promote real scientific progress in fusion

Variations in discharge and temperature of mineral springs at the Frantiskovy Lazne Spa, Czech Republic, during a nearby earthquake swarm in 1985/1986

Czech Academy of Sciences Publication Activity Database

span class="emphasis">Stejskal, Vladimírspan>; span class="emphasis">Málek, Jiříspan>; Novotný, O.

2008-01-01

Roč. 52, č. 4 (2008), s. 589-606 ISSN 0039-3169. [West-Bohemia/Vogtland international workshop "Geodynamics of Earthquake Swarm Areas" /8./. Františkovy Lázně, 16.10.2007-19.10.2007] R&D Projects: GA ČR(CZ) GD205/05/H020; GA AV ČR IAA300460602 Institutional research plan: CEZ:AV0Z30460519 Keywords : western Bohemia * earthquake swarm * mineral springs Subject RIV: DC - Siesmology, Volcanology, Earth Structure Impact factor: 0.770, year: 2008

Coil spring venting arrangement

International Nuclear Information System (INIS)

McCugh, R.M.

1975-01-01

A simple venting device for trapped gas pockets in hydraulic systems is inserted through a small access passages, operated remotely, and removed completely. The device comprises a small diameter, closely wound coil spring which is pushed through a guide temporarily inserted in the access passage. The guide has a central passageway which directs the coil spring radially upward into the pocket, so that, with the guide properly positioned for depth and properly oriented, the coil spring can be pushed up into the top of the pocket to vent it. By positioning a seal around the free end of the guide, the spring and guide are removed and the passage is sealed

IPCC workshop on impacts of ocean acidification on marine biology and ecosystems. Workshop report

Energy Technology Data Exchange (ETDEWEB)

Field, C.B.; Barros, V.; Stocker, T.F.; Dahe, Q.; Mach, K.J.; Plattner, G.-K.; Mastrandrea, M.D.; Tignor, M.; Ebi, K.L.

2011-09-15

Understanding the effects of increasing atmospheric CO{sub 2} concentrations on ocean chemistry, commonly termed ocean acidification, as well as associated impacts on marine biology and ecosystems, is an important component of scientific knowledge about global change. The Fifth Assessment Report (AR5) of the Intergovernmental Panel on Climate Change (IPCC) will include comprehensive coverage of ocean acidification and its impacts, including potential feedbacks to the climate system. To support ongoing AR5 assessment efforts, Working Group II and Working Group I (WGII and WGI) of the IPCC held a joint Workshop on Impacts of Ocean Acidification on Marine Biology and Ecosystems in Okinawa, Japan, from 17 to 19 January 2011. The workshop convened experts from the scientific community, including WGII and WGI AR5 authors and review editors, to synthesise scientific understanding of changes in ocean chemistry due to increased CO{sub 2} and of impacts of this changing chemistry on marine organisms, ecosystems, and ecosystem services. This workshop report summarises the scientific content and perspectives presented and discussed during the workshop. It provides syntheses of these perspectives for the workshop's core topics: (i) the changing chemistry of the oceans, (ii) impacts of ocean acidification for individual organisms, and (iii) scaling up responses from individual organisms to ecosystems. It also presents summaries of workshop discussions of key cross-cutting themes, ranging from detection and attribution of ocean acidification and its impacts to understanding ocean acidification in the context of other stressors on marine systems. Additionally, the workshop report includes extended abstracts for keynote and poster presentations at the workshop. (Author)

7th Workshop on heavy charged particles in biology and medicine. Book of abstracts

International Nuclear Information System (INIS)

Kraft, G.; Langbein, K.

2000-09-01

The topics of the workshop were as follows: RBE experiments, reference data for treatment planning, RBE models, integration of RBE into treatment planning, clinical results. All papers are available as separate moduls in this database. (MG)

Comparative spring mechanics in mantis shrimp.

Science.gov (United States)

Patek, S N; Rosario, M V; Taylor, J R A

2013-04-01

Elastic mechanisms are fundamental to fast and efficient movements. Mantis shrimp power their fast raptorial appendages using a conserved network of exoskeletal springs, linkages and latches. Their appendages are fantastically diverse, ranging from spears to hammers. We measured the spring mechanics of 12 mantis shrimp species from five different families exhibiting hammer-shaped, spear-shaped and undifferentiated appendages. Across species, spring force and work increase with size of the appendage and spring constant is not correlated with size. Species that hammer their prey exhibit significantly greater spring resilience compared with species that impale evasive prey ('spearers'); mixed statistical results show that species that hammer prey also produce greater work relative to size during spring loading compared with spearers. Disabling part of the spring mechanism, the 'saddle', significantly decreases spring force and work in three smasher species; cross-species analyses show a greater effect of cutting the saddle on the spring force and spring constant in species without hammers compared with species with hammers. Overall, the study shows a more potent spring mechanism in the faster and more powerful hammering species compared with spearing species while also highlighting the challenges of reconciling within-species and cross-species mechanical analyses when different processes may be acting at these two different levels of analysis. The observed mechanical variation in spring mechanics provides insights into the evolutionary history, morphological components and mechanical behavior, which were not discernible in prior single-species studies. The results also suggest that, even with a conserved spring mechanism, spring behavior, potency and component structures can be varied within a clade with implications for the behavioral functions of power-amplified devices.

Workshop on assessments of National Carbon Budgets within the Nordic Region

DEFF Research Database (Denmark)

Hansen, Kristina; Koyama, Aki; Lansø, Anne Sofie

The three-day workshop organized by the three Nordic research projects; ECOCLIM, LAGGE and SnowCarbo brought together scientists and other actors from Nordic countries to communicate and discuss research on carbon budget estimations in the Nordic region. Through presentations of most recent...... research in the field and following scientific discussions, the workshop contributed to strengthen the scientific basis of the identification and quantification of major natural carbon sinks in the Nordic region on which integrated climate change abatement and management strategies and policy decisions...... status and knowledge on research on assessments of national carbon budgets as well as on projections and sensitivity to future changes in e.g. management and climate change in the Nordic Region....

Workshop on assessments of National Carbon Budgets within the Nordic Region

DEFF Research Database (Denmark)

Mørk, Eva Thorborg; Lansø, Anne Sofie; Hansen, Kristina

2013-01-01

The three-day workshop organized by the three Nordic research projects; ECOCLIM, LAGGE and SnowCarbo brought together scientists and other actors from Nordic countries to communicate and discuss research on carbon budget estimations in the Nordic region. Through presentations of most recent...... research in the field and following scientific discussions, the workshop contributed to strengthen the scientific basis of the identification and quantification of major natural carbon sinks in the Nordic region on which integrated climate change abatement and management strategies and policy decisions...... status and knowledge on research on assessments of national carbon budgets as well as on projections and sensitivity to future changes in e.g. management and climate change in the Nordic Region....

Japan-IAEA Workshops on Advanced Safeguards for Future Nuclear Fuel Cycles

International Nuclear Information System (INIS)

Hoffheins, B.; Hori, M.; Suzuki, M.; Kuno, Y.; Kimura, N.; Naito, K.; Hosoya, M.; Khlebnikov, N.; Whichello, J.; Zendel, M.

2010-01-01

Beginning in 2007, the Japan Atomic Energy Agency (JAEA) and the International Atomic Energy Agency (IAEA) Department of Safeguards initiated a workshop series focused on advanced safeguards technologies for the future nuclear fuel cycle (NFC). The goals for these workshops were to address safeguards challenges, to share implementation experiences, to discuss fuel cycle plans and promising research and development, and to address other issues associated with safeguarding new fuel cycle facilities. Concurrently, the workshops also served to promote dialog and problem solving, and to foster closer collaborations for facility design and planning. These workshops have sought participation from IAEA Member States' support programmes (MSSP), the nuclear industry, R and D organizations, state systems of accounting and control (SSAC), regulators and inspectorates to ensure that all possible stakeholder views can be shared in an open process. Workshop presentations have covered, inter alia, national fuel cycle programs and plans, research progress in proliferation resistance (PR) and safeguardability, approaches for nuclear measurement accountancy of large material throughputs and difficult to access material, new and novel radiation detectors with increased sensitivity and automation, and lessons learned from recent development and operation of safeguards systems for complex facilities and the experiences of integrated safeguards (IS) in Japan. Although the title of the workshops presumes an emphasis on technology, participants recognized that early planning and organization, coupled with close cooperation among stakeholders, that is, through the application of 'Safeguards by Design' (SBD) processes that include nuclear safety and security coordination, 'Remote Inspections' and 'Joint-Use of Equipment (JUE)' would be required to enable more successful implementations of safeguards at future NFC facilities. The needs to cultivate the future workforce, effectively preserve

Cross-Cultural Interprofessional Faculty Development in Japan: Results of an Integrated Workshop for Clinical Teachers.

Science.gov (United States)

Wong, Jeffrey G; Son, Daisuke; Miura, Wakako

2017-12-01

Faculty development programs, studied both home and abroad, have been shown to be helpful for enhancing the scholarly and academic work of nonacademic clinicians. Interprofessional education and faculty development efforts have been less well studied. This project investigated the effect of a well-studied faculty development program applied in an interprofessional fashion across health profession educators in medicine and nursing. A faculty cohort of nurse and physician educators at The University of Tokyo underwent training in the Stanford Faculty Development Center (SFDC) model of clinical teaching through a sequence of 7 workshops. The workshops were performed in English with all materials translated into Japanese. A validated, retrospective pretest and posttest instrument was used to measure study outcomes on global assessment of teaching abilities and specific teaching behaviors (STBs) at 1 and 12 months after intervention. Successful completion of Commitment to Change statements were also assessed at 12 months. In total, 19 faculty participants completed the study. All participants found the workshops valuable. For global assessment, significant improvement in self-reported teaching abilities was seen comparing the mean pretest scores of 27.26 (maximum score = 55, standard deviation [SD] = 8.61) with mean scores at both 1 month (36.81, SD = 7.48, P Japan. Copyright © 2017 Southern Society for Clinical Investigation. Published by Elsevier Inc. All rights reserved.

Workshop on Subcritical Neutron Production

International Nuclear Information System (INIS)

Walter Sadowski; Roald Sagdeev

2006-01-01

Executive Summary of the Workshop on Subcritical Neutron Production A workshop on Subcritical Neutron Production was sponsored by the East-West Center of the University of Maryland on October 11-13, 2004. The subject of the workshop was the application of subcritical neutrons to transmutation of actinides. The workshop was attended by members of the fission, accelerator and fusion communities. Papers on the state of development of neutron production by accelerators, fusion devices, and fission reactors were presented. Discussions were held on the potential of these technologies to solve the problems of spent nuclear waste storage and nuclear non-proliferation presented by current and future nuclear power reactors. A list of participants including their affiliation and their E-Mail addresses is attached. The workshop concluded that the technologies, presently available or under development, hold out the exciting possibility of improving the environmental quality and long term energy resources of nuclear power while strengthening proliferation resistance. The workshop participants agreed on the following statements. The workshop considered a number of technologies to deal with spent nuclear fuels and current actinide inventories. The conclusion was reached that substantial increase in nuclear power production will require that the issue of spent nuclear fuel be resolved. The Workshop concluded that 14 MeV fusion neutrons can be used to destroy nuclear reactor by-products, some of which would otherwise have to be stored for geologic periods of time. The production of 14 MeV neutrons is based on existing fusion technologies at different research institutions in several countries around the world. At the present time this technology is used to produce 14 MeV neutrons in JET. More development work will be required, however, to bring fusion technology to the level where it can be used for actinide burning on an industrial scale. The workshop concluded that the potential

Proceedings from the technical workshop on near-field performance assessment for high-level waste

International Nuclear Information System (INIS)

Sellin, P.; Apted, M.; Gago, J.

1991-12-01

This report contains the proceedings of 'Technical workshop of near-filed performance assessment for high-level waste' held in Madrid October 15-17, 1990. It includes the invited presentations and summaries of the scientific discussions. The workshop covered several topics: * post-emplacement environment, * benchmarking of computer codes, * glass release, * spent-fuel release, * radionuclide solubility, * near-field transport processes, * coupled processes in the near-field, * integrated assessments, * sensitivity analyses and validation. There was an invited presentation on each topic followed by an extensive discussion. One of the points highlighted in the closing discussion of the workshop was the need for international cooperation in the field of near-field performance assessment. The general opinion was that this was best achieved in smaller groups discussing specific questions. (au) Separate abstracts were prepared for 9 papers in this volume

IPHE Infrastructure Workshop Proceedings

Energy Technology Data Exchange (ETDEWEB)

None

2010-02-01

This proceedings contains information from the IPHE Infrastructure Workshop, a two-day interactive workshop held on February 25-26, 2010, to explore the market implementation needs for hydrogen fueling station development.

Mockito for Spring

CERN Document Server

Acharya, Sujoy

2015-01-01

If you are an application developer with some experience in software testing and want to learn more about testing frameworks, then this technology and book is for you. Mockito for Spring will be perfect as your next step towards becoming a competent software tester with Spring and Mockito.

Integration: valuing stakeholder input in setting priorities for socially sustainable egg production.

Science.gov (United States)

Swanson, J C; Lee, Y; Thompson, P B; Bawden, R; Mench, J A

2011-09-01

Setting directions and goals for animal production systems requires the integration of information achieved through internal and external processes. The importance of stakeholder input in setting goals for sustainable animal production systems should not be overlooked by the agricultural animal industries. Stakeholders play an integral role in setting the course for many aspects of animal production, from influencing consumer preferences to setting public policy. The Socially Sustainable Egg Production Project (SSEP) involved the development of white papers on various aspects of egg production, followed by a stakeholder workshop to help frame the issues for the future of sustainable egg production. Representatives from the environmental, food safety, food retail, consumer, animal welfare, and the general farm and egg production sectors participated with members of the SSEP coordination team in a 1.5-d workshop to explore socially sustainable egg production. This paper reviews the published literature on values integration methodologies and the lessons learned from animal welfare assessment models. The integration method used for the SSEP stakeholder workshop and its outcome are then summarized. The method used for the SSEP stakeholder workshop can be used to obtain stakeholder input on sustainable production in other farm animal industries.

Workshop on technology issues of superconducting Maglev transportation systems

International Nuclear Information System (INIS)

Wegrzyn, J.E.; Shaw, D.T.

1991-01-01

There exists a critical need in the United States to improve its ground transportation system. One suggested system that offers many advantages over the current transportation infrastructure is Maglev. Maglev represents the latest evolution in very high and speed ground transportation, where vehicles are magnetically levitated, guided, and propelled over elevated guideways at speeds of 300 miles per hour. Maglev is not a new concept but is, however, receiving renewed interest. The objective of this workshop was to further promote these interest by bringing together a small group of specialists in Maglev technology to discuss Maglev research needs and to identify key research issues to the development of a successful Maglev system. The workshop was organized into four sessions based on the following technical areas: Materials, Testing, and Shielding; Magnet Design and Cryogenic Systems; Propulsion and Levitation Systems; and, System Control and Integration

Applications of ion beam analysis workshop. Workshop handbook

International Nuclear Information System (INIS)

1995-01-01

A workshop on applications of ion beam analysis was held at ANSTO, immediate prior to the IBMM-95 Conference in Canberra. It aims was to review developments and current status on use of ion beams for analysis, emphasizing the following aspects: fundamental ion beam research and secondary effects of ion beams; material sciences, geological, life sciences, environmental and industrial applications; computing codes for use in accelerator research; high energy heavy ion scattering and recoil; recent technological development using ion beams. The handbook contains the workshop's program, 29 abstracts and a list of participants

Workshop proceedings of ISAMM 2009: Implementation of severe accident management measures

International Nuclear Information System (INIS)

Guentay, S.

2010-10-01

This comprehensive report published by the Paul Scherrer Institute (PSI) in Switzerland reports on a conference and workshop held in Switzerland in October 2009 dealing with Severe Accidents Management (SAM) in nuclear power stations. The workshop provided an update on the status of severe accident management measures and their implications since the OECD/CSNI workshop held in 2001 at the PSI in Switzerland. Since the 2001 workshop, additional work has been performed to integrate emergency procedures and SAM measures into risk assessments in order to better reflect operator responses to recover a plant from a damaged state. The major focus of the workshop was to address SAM measures for both operational plants and new plant designs. Also, the integration of SAM measures into contemporary/future probabilistic risk assessments was discussed. 41 papers were presented in 8 sessions. The papers addressed the following areas: 1) Current status and insights of SAM (2 sessions); 2) Probabilistic Safety Assessment (PSA) modelling issues; 3) code analysis for supporting Serious Accident Management Guidance (SAMG, 2 sessions); 4) decision making, tools, training, risk-targets and entrance to SAM; 5) design modifications for implementation of SAM; 6) physical phenomena. The last part of the workshop was devoted to the presentation of the most striking highlights of the papers in the above areas, followed by two panellists giving presentations on human and organisational aspects of SAM, their importance in relation to technical issues and the effectiveness of current SAMG implementation. The question of how consequence analyses can be used to improve the effectiveness of SAM is discussed. The contributions were presented by representatives from Austria, Germany, Japan, France, the USA, Korea, Switzerland, Finland, Hungary, Belgium, Canada, Sweden, the Czech republic, the United kingdom, the Netherlands, Spain, Slovenia and Russia. The authors state that the overall picture

Workshop proceedings of ISAMM 2009: Implementation of severe accident management measures

Energy Technology Data Exchange (ETDEWEB)

Guentay, S. (ed.) [Paul Scherrer Institute (PSI), Nuclear Energy and Safety Research Department, Laboratory for Thermal Hydraulics, ViIligen (Switzerland)

2010-10-15

This comprehensive report published by the Paul Scherrer Institute (PSI) in Switzerland reports on a conference and workshop held in Switzerland in October 2009 dealing with Severe Accidents Management (SAM) in nuclear power stations. The workshop provided an update on the status of severe accident management measures and their implications since the OECD/CSNI workshop held in 2001 at the PSI in Switzerland. Since the 2001 workshop, additional work has been performed to integrate emergency procedures and SAM measures into risk assessments in order to better reflect operator responses to recover a plant from a damaged state. The major focus of the workshop was to address SAM measures for both operational plants and new plant designs. Also, the integration of SAM measures into contemporary/future probabilistic risk assessments was discussed. 41 papers were presented in 8 sessions. The papers addressed the following areas: 1) Current status and insights of SAM (2 sessions); 2) Probabilistic Safety Assessment (PSA) modelling issues; 3) code analysis for supporting Serious Accident Management Guidance (SAMG, 2 sessions); 4) decision making, tools, training, risk-targets and entrance to SAM; 5) design modifications for implementation of SAM; 6) physical phenomena. The last part of the workshop was devoted to the presentation of the most striking highlights of the papers in the above areas, followed by two panellists giving presentations on human and organisational aspects of SAM, their importance in relation to technical issues and the effectiveness of current SAMG implementation. The question of how consequence analyses can be used to improve the effectiveness of SAM is discussed. The contributions were presented by representatives from Austria, Germany, Japan, France, the USA, Korea, Switzerland, Finland, Hungary, Belgium, Canada, Sweden, the Czech republic, the United kingdom, the Netherlands, Spain, Slovenia and Russia. The authors state that the overall picture

Spring onset variations and long-term trends from new hemispheric-scale products and remote sensing

Science.gov (United States)

Dye, D. G.; Li, X.; Ault, T.; Zurita-Milla, R.; Schwartz, M. D.

2015-12-01

Spring onset is commonly characterized by plant phenophase changes among a variety of biophysical transitions and has important implications for natural and man-managed ecosystems. Here, we present a new integrated analysis of variability in gridded Northern Hemisphere spring onset metrics. We developed a set of hemispheric temperature-based spring indices spanning 1920-2013. As these were derived solely from meteorological data, they are used as a benchmark for isolating the climate system's role in modulating spring "green up" estimated from the annual cycle of normalized difference vegetation index (NDVI). Spatial patterns of interannual variations, teleconnections, and long-term trends were also analyzed in all metrics. At mid-to-high latitudes, all indices exhibit larger variability at interannual to decadal time scales than at spatial scales of a few kilometers. Trends of spring onset vary across space and time. However, compared to long-term trend, interannual to decadal variability generally accounts for a larger portion of the total variance in spring onset timing. Therefore, spring onset trends identified from short existing records may be aliased by decadal climate variations due to their limited temporal depth, even when these records span the entire satellite era. Based on our findings, we also demonstrated that our indices have skill in representing ecosystem-level spring phenology and may have important implications in understanding relationships between phenology, atmosphere dynamics and climate variability.

Characterization of the hydrogeology of the sacred Gihon Spring, Jerusalem: a deteriorating urban karst spring

Science.gov (United States)

Amiel, Ronit Benami; Grodek, Tamir; Frumkin, Amos

2010-09-01

The Gihon Spring, Jerusalem, is important for the major monotheistic religions. Its hydrogeology and hydrochemistry is studied here in order to understand urbanization effects on karst groundwater resources, and promote better water management. High-resolution monitoring of the spring discharge, temperature and electrical conductivity, was performed, together with chemical and bacterial analysis. All these demonstrate a rapid response of the spring to rainfall events and human impact. A complex karst system is inferred, including conduit flow, fissure flow and diffuse flow. Electrical conductivity, Na+ and K+ values (2.0 mS/cm, 130 and 50 mg/l respectively) are very high compared to other nearby springs located at the town margins (0.6 mS/cm, 15 and <1 mg/l respectively), indicating considerable urban pollution in the Gihon area. The previously cited pulsating nature of the spring was not detected during the present high-resolution monitoring. This phenomenon may have ceased due to additional water sources from urban leakage and irrigation feeding the spring. The urbanization of the recharge catchment thus affects the spring water dramatically, both chemically and hydrologically. Appropriate measures should therefore be undertaken to protect the Gihon Spring and other karst aquifers threatened by rapid urbanization.

Nitrogen Source Inventory and Loading Tool: An integrated approach toward restoration of water-quality impaired karst springs.

Science.gov (United States)

Eller, Kirstin T; Katz, Brian G

2017-07-01

Nitrogen (N) from anthropogenic sources has contaminated groundwater used as drinking water in addition to impairing water quality and ecosystem health of karst springs. The Nitrogen Source Inventory and Loading Tool (NSILT) was developed as an ArcGIS and spreadsheet-based approach that provides spatial estimates of current nitrogen (N) inputs to the land surface and loads to groundwater from nonpoint and point sources within the groundwater contributing area. The NSILT involves a three-step approach where local and regional land use practices and N sources are evaluated to: (1) estimate N input to the land surface, (2) quantify subsurface environmental attenuation, and (3) assess regional recharge to the aquifer. NSILT was used to assess nitrogen loading to groundwater in two karst spring areas in west-central Florida: Rainbow Springs (RS) and Kings Bay (KB). The karstic Upper Floridan aquifer (UFA) is the source of water discharging to the springs in both areas. In the KB study area (predominantly urban land use), septic systems and urban fertilizers contribute 48% and 22%, respectively, of the estimated total annual N load to groundwater 294,400 kg-N/yr. In contrast for the RS study area (predominantly agricultural land use), livestock operations and crop fertilizers contribute 50% and 13%, respectively, of the estimated N load to groundwater. Using overall groundwater N loading rates for the KB and RS study areas, 4.4 and 3.3 kg N/ha, respectively, and spatial recharge rates, the calculated groundwater nitrate-N concentration (2.1 mg/L) agreed closely with the median nitrate-N concentration (1.7 mg/L) from groundwater samples in agricultural land use areas in the RS study area for the period 2010-2014. NSILT results provide critical information for prioritizing and designing restoration efforts for water-quality impaired springs and spring runs affected by multiple sources of nitrogen loading to groundwater. The calculated groundwater N concentration for

Summer 1994 Computational Science Workshop. Final report

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-12-31

This report documents the work performed by the University of New Mexico Principal Investigators and Research Assistants while hosting the highly successful Summer 1994 Computational Sciences Workshop in Albuquerque on August 6--11, 1994. Included in this report is a final budget for the workshop, along with a summary of the participants` evaluation of the workshop. The workshop proceeding have been delivered under separate cover. In order to assist in the organization of future workshops, we have also included in this report detailed documentation of the pre- and post-workshop activities associated with this contract. Specifically, we have included a section that documents the advertising performed, along with the manner in which applications were handled. A complete list of the workshop participants in this section. Sample letters that were generated while dealing with various commercial entities and departments at the University are also included in a section dealing with workshop logistics. Finally, we have included a section in this report that deals with suggestions for future workshops.

Vulcano Workshop 2016

CERN Document Server

Mannocchi, G.; Morselli, A.; Trinchero, G.

2016-01-01

We announce the XVI Vulcano Workshop, which will be held from May 22nd to May 28th, 2016 in the Vulcano Island (Sicily, Italy). As in the past editions, the workshop will aim to gather people from High Energy Astrophysics and Particle Physics to discuss the most recent highlights in these fields. The workshop will cover the following topics: Astrophysics/Cosmology, Astrophysics/Gravity, Dark Matter, Particle Physics, Cosmic Rays, Gamma/Neutrino Astronomy, Neutrinos and Future Prospects. The scientific program will include several 30-minute review talks, to introduce the current problems, and 20-minute talks, giving new experimental and theoretical results. The participation is by invitation and limited to 80 people.

N Reactor Lessons Learned workshop

International Nuclear Information System (INIS)

Heaberlin, S.W.

1993-07-01

This report describes a workshop designed to introduce participants to a process, or model, for adapting LWR Safety Standards and Analysis Methods for use on rector designs significantly different than LWR. The focus of the workshop is on the ''Lessons Learned'' from the multi-year experience in the operation of N Reactor and the efforts to adapt the safety standards developed for commercial light water reactors to a graphite moderated, water cooled, channel type reactor. It must be recognized that the objective of the workshop is to introduce the participants to the operation of a non-LWR in a LWR regulatory world. The total scope of this topic would take weeks to provide a through overview. The objective of this workshop is to provide an introduction and hopefully establish a means to develop a longer term dialogue for technical exchange. This report provides outline of the workshop, a proposed schedule of the workshop, and a description of the tasks will be required to achieve successful completion of the project

Cancer genetics education in a low- to middle-income country: evaluation of an interactive workshop for clinicians in Kenya.

Directory of Open Access Journals (Sweden)

Jessica A Hill

Full Text Available Clinical genetic testing is becoming an integral part of medical care for inherited disorders. While genetic testing and counseling are readily available in high-income countries, in low- and middle-income countries like Kenya genetic testing is limited and genetic counseling is virtually non-existent. Genetic testing is likely to become widespread in Kenya within the next decade, yet there has not been a concomitant increase in genetic counseling resources. To address this gap, we designed an interactive workshop for clinicians in Kenya focused on the genetics of the childhood eye cancer retinoblastoma. The objectives were to increase retinoblastoma genetics knowledge, build genetic counseling skills and increase confidence in those skills.The workshop was conducted at the 2013 Kenyan National Retinoblastoma Strategy meeting. It included a retinoblastoma genetics presentation, small group discussion of case studies and genetic counseling role-play. Knowledge was assessed by standardized test, and genetic counseling skills and confidence by questionnaire.Knowledge increased significantly post-workshop, driven by increased knowledge of retinoblastoma causative genetics. One-year post-workshop, participant knowledge had returned to baseline, indicating that knowledge retention requires more frequent reinforcement. Participants reported feeling more confident discussing genetics with patients, and had integrated more genetic counseling into patient interactions.A comprehensive retinoblastoma genetics workshop can increase the knowledge and skills necessary for effective retinoblastoma genetic counseling.

Cancer genetics education in a low- to middle-income country: evaluation of an interactive workshop for clinicians in Kenya.

Science.gov (United States)

Hill, Jessica A; Lee, Su Yeon; Njambi, Lucy; Corson, Timothy W; Dimaras, Helen

2015-01-01

Clinical genetic testing is becoming an integral part of medical care for inherited disorders. While genetic testing and counseling are readily available in high-income countries, in low- and middle-income countries like Kenya genetic testing is limited and genetic counseling is virtually non-existent. Genetic testing is likely to become widespread in Kenya within the next decade, yet there has not been a concomitant increase in genetic counseling resources. To address this gap, we designed an interactive workshop for clinicians in Kenya focused on the genetics of the childhood eye cancer retinoblastoma. The objectives were to increase retinoblastoma genetics knowledge, build genetic counseling skills and increase confidence in those skills. The workshop was conducted at the 2013 Kenyan National Retinoblastoma Strategy meeting. It included a retinoblastoma genetics presentation, small group discussion of case studies and genetic counseling role-play. Knowledge was assessed by standardized test, and genetic counseling skills and confidence by questionnaire. Knowledge increased significantly post-workshop, driven by increased knowledge of retinoblastoma causative genetics. One-year post-workshop, participant knowledge had returned to baseline, indicating that knowledge retention requires more frequent reinforcement. Participants reported feeling more confident discussing genetics with patients, and had integrated more genetic counseling into patient interactions. A comprehensive retinoblastoma genetics workshop can increase the knowledge and skills necessary for effective retinoblastoma genetic counseling.

OECD/CSNI Workshop on In-Vessel Core Debris Retention and Coolability - Summary and Conclusions

International Nuclear Information System (INIS)

Behbahani, Ali-Reza; Drozd, Andrzej; Kim, Sang-Baik; Micaelli, Jean-Claude; Okkonen, Timo; Sugimoto, Jun; Trambauer, Klaus; Tuomisto, Harri

1999-01-01

In the spring of 1994 an OECD Workshop on Large Pool Heat transfer was held in Grenoble. The scope of this workshop was the investigation of (1) molten pool heat transfer, (2) heat transfer to the surrounding water, and (3) the feasibility of in-vessel core debris cooling through external cooling of the vessel. Since this time, experimental test series have been completed (e.g., COPO, ULPU, CORVIS) and new experimental programs (e.g., BALI, SONATA, RASPLAV, debris and gap heat transfer) have been established to consolidate and expand the data base for further model development and to improve the understanding of in-vessel debris retention and coolability in a nuclear power plant. Discussions within the CSNI's PWG-2 and the Task Group on Degraded Core Cooling (TG-DCC) have led to the conclusion that the time was ripe for organizing a new international Workshop with the objectives: - to review the results of experimental research that has been conducted in this area; - to exchange information on the results of member countries experiments and model development on in-vessel core debris retention and coolability; - to discuss areas where additional experimental research is needed in order to provide an adequate data base for analytical model development for core debris retention and coolability. The scope of this workshop was limited to the phenomena connected to in-vessel core debris retention and coolability and did not include steam explosion and fission product issues. The workshop was structured into the following sessions: Key note papers; Experiments and model development; Debris bed heat transfer; Corium properties, molten pool convection and crust formation; Gap formation and gap cooling; Creep behaviour of reactor pressure vessel lower head; Ex-vessel boiling and critical heat flux phenomena; Scaling to reactor severe accident conditions and reactor applications. Compared to the previous workshop held in Grenoble in 1994, large progress has been made in the

Biological Characterization of Microenvironments in a Hypersaline Cold Spring Mars Analog

Directory of Open Access Journals (Sweden)

Haley M. Sapers

2017-12-01

Full Text Available While many habitable niches on Earth are characterized by permanently cold conditions, little is known about the spatial structure of seasonal communities and the importance of substrate-cell associations in terrestrial cyroenvironments. Here we use the 16S rRNA gene as a marker for genetic diversity to compare two visually distinct but spatially integrated surface microbial mats on Axel Heiberg Island, Canadian high arctic, proximal to a perennial saline spring. This is the first study to describe the bacterial diversity in microbial mats on Axel Heiberg Island. The hypersaline springs on Axel Heiberg represent a unique analog to putative subsurface aquifers on Mars. The Martian subsurface represents the longest-lived potentially habitable environment on Mars and a better understanding of the microbial communities on Earth that thrive in analog conditions will help direct future life detection missions. The microbial mats sampled on Axel Heiberg are only visible during the summer months in seasonal flood plains formed by melt water and run-off from the proximal spring. Targeted-amplicon sequencing revealed that not only does the bacterial composition of the two mat communities differ substantially from the sediment community of the proximal cold spring, but that the mat communities are distinct from any other microbial community in proximity to the Arctic springs studied to date. All samples are dominated by Gammaproteobacteria: Thiotichales is dominant within the spring samples while Alteromonadales comprises a significant component of the mat communities. The two mat samples differ in their Thiotichales:Alteromonadales ratio and contribution of Bacteroidetes to overall diversity. The red mats have a greater proportion of Alteromonadales and Bacteroidetes reads. The distinct bacterial composition of the mat bacterial communities suggests that the spring communities are not sourced from the surface, and that seasonal melt events create

A new Model for the Preparing for an Academic Career in the Geosciences Workshop

Science.gov (United States)

Gilbert, L. A.; Marin-Spiotta, E.; LeMay, L.; Reed, D. E.; Desai, A. R.; Macdonald, H.

2016-12-01

The NAGT/On the Cutting Edge program has offered annual workshops on Preparing for an Academic Career in the Geosciences since 2003, providing professional development for more than 800 graduate students and post-docs. In July 2016, the multi-day workshop was modified to be integrated into a larger conference, the Earth Educators' Rendezvous. This new format brought both challenges and opportunities. Like prior workshops, participants engaged with peers and workshop leaders from a range of educational settings to improve their application and interview skills for academic jobs, become more effective at goal-setting and time management, and broaden their network of colleagues and resources to jump-start teaching and research as a faculty member. They learned about academic careers in different educational settings (two-year colleges, primarily undergraduate institutions, and research-focused universities), and developed plans and goals for their next career stage. The biggest challenge of the new workshop format was paring down material from 2.5 full days. Thus, in addition to the 3 morning sessions allocated for the workshop, leaders added a 3-hour teaching statement review dinner, an optional evening session to discuss finances and work-life balance, and optional small group lunch discussions on all 3 days, which were all well attended. Participants were then able to take advantage of afternoon sessions at the Rendezvous, including demonstrations of exemplary teaching, plenary talks, poster sessions, and mini-workshops on topics from curriculum design to proposal writing. Participant reviews were positive and nearly all aspects were ranked as most valuable, with an overall satisfaction mean of 9.1 on a scale from 1-10, with 10 being "Very satisfied." Participants particularly valued the sessions related to careers and the job search process. Some wished the workshop had been longer to cover more material. Participants enjoyed the opportunity to gain more skills at

Solid State Energy Conversion Alliance 2nd Annual Workshop Proceedings

International Nuclear Information System (INIS)

National Energy Technology Laboratory

2001-01-01

The National Energy Technology Laboratory (NETL) and the Pacific Northwest National Laboratory (PNNL) are pleased to provide the proceedings of the second annual Solid State Energy Conversion Alliance (SECA) Workshop held on March 29-30, 2001 in Arlington. The package includes the presentations made during the workshop, a list of participants, and the results of the breakout sessions. Those sessions covered stack materials and processes, power electronics, balance of plant and thermal integration, fuel processing technologies, and stack and system performance modeling. The breakout sessions have been reported as accurately as possible; however, due to the recording and transcription process errors may have occurred. If you note any significant omissions or wish to provide additional information, we welcome your comments and hope that all stakeholder groups will use the enclosed information in their planning endeavors

Solid State Energy Conversion Alliance 2nd Annual Workshop Proceedings

Energy Technology Data Exchange (ETDEWEB)

National Energy Technology Laboratory

2001-03-30

The National Energy Technology Laboratory (NETL) and the Pacific Northwest National Laboratory (PNNL) are pleased to provide the proceedings of the second annual Solid State Energy Conversion Alliance (SECA) Workshop held on March 29-30, 2001 in Arlington. The package includes the presentations made during the workshop, a list of participants, and the results of the breakout sessions. Those sessions covered stack materials and processes, power electronics, balance of plant and thermal integration, fuel processing technologies, and stack and system performance modeling. The breakout sessions have been reported as accurately as possible; however, due to the recording and transcription process errors may have occurred. If you note any significant omissions or wish to provide additional information, we welcome your comments and hope that all stakeholder groups will use the enclosed information in their planning endeavors.

Report of the Orientation Workshop

DEFF Research Database (Denmark)

Nunez, Heilyn Camacho; Buus, Lillian; Ogange, Betty

2014-01-01

This Orientation Workshops is part of MAAGART project. The workshop is divided in three parts: 1) pre-Orientation Workshop stage, 2) Face-to-Face stage and 3) post-Orientation stage. Pre and post stages will be developed online. All the activities will take place in a virtual learning environment...... created for this purpose. Participants will receive all the information about how to access the virtual learning environment (Moodle) prior to the pre-orientation workshop. In this report we cover only the two first stages. Jørgen Bang, as a part of the Community of Practice activity, will be facilitating...

EPRI steam turbine and generator NDE, life assessment, and maintenance workshop

International Nuclear Information System (INIS)

Nottingham, L.D.; Sabourin, P.F.

1992-10-01

On July 16--19, 1991, the EPRI NDE Center hosted the second EPRI Steam Turbine and Generator NDE, Life Assessment and Maintenance Workshop. This workshop was co-sponsored by the Nuclear Power and the Generation and Storage Divisions of EPRI. Attendees represented all sectors of the industry including utilities, equipment manufacturers, forging suppliers, service organizations, government organizations, insurancecarriers, and consultants from the United States and abroad. Domestic utility presence was again strong, with 105 representatives from 44 utilities in attendance. Australia, Canada, England, Finland, France, Germany, Italy, Japan, Korea, New Zealand, Spain, Sweden and Switzerland were represented in the international contingent. A key and integral part of the workshop was a vendor equipment fair, in which some 23 organizations displayed and demonstrated equipment and services that they offer. Formal presentation of 53 technical papers made up the technical portion of the agenda, which also included two breakout discussion sessions on topical subjects. To provide optimum opportunity for participants to hear all presentations on closely related topics, the sessions were set such that a NDE session ran parallel to the life assessment session. The first NDE session included turbine related topics while the first life assessment session addressed generator issues. The last sessions of the workshop were just reversed with turbine topics being addressed in the life assessment session while generator issues were presented in the NDE session. Presentations on maintenance topics and on monitoring and diagnostics topics were also presented in parallel sessions. These proceedings contain the texts of the papers presented at the workshop. Individual papers in indexed separately

Workshop: health workforce governance and integration.

NARCIS (Netherlands)

Batenburg, R.

2014-01-01

Background: Health workforce governance is increasingly recognized as a burning policy issue and focused on workforce shortages. Yet the most pressing problem is to solve maldistributions through governance and integration. Poor management of health 242 European Journal of Public Health, Vol. 24,

Nature-based integration

DEFF Research Database (Denmark)

Pitkänen, Kati; Oratuomi, Joose; Hellgren, Daniela

Increased attention to, and careful planning of the integration of migrants into Nordic societies is ever more important. Nature based integration is a new solution to respond to this need. This report presents the results of a Nordic survey and workshop and illustrates current practices of nature...... based integration by case study descriptions from Denmark, Sweden Norway and Finland. Across Nordic countries several practical projects and initiatives have been launched to promote the benefits of nature in integration and there is also growing academic interest in the topic. Nordic countries have...... the potential of becoming real forerunners in nature based integration even at the global scale....

Executive summary: Weldon Spring Site Environmental Report for calendar year 1992. Weldon Spring Site Remedial Action Project, Weldon Spring, Missouri

Energy Technology Data Exchange (ETDEWEB)

1993-06-01

This report has been prepared to provide information about the public safety and environmental protection programs conducted by the Weldon Spring Site Remedial Action Project. The Weldon Spring site is located in southern St. Charles County, Missouri, approximately 48 km (30 mi) west of St. Louis. The site consists of two main areas, the Weldon Spring Chemical Plant and raffinate pits and the Weldon Spring Quarry. The objectives of the Site Environmental Report are to present a summary of data from the environmental monitoring program, to characterize trends and environmental conditions at the site, and to confirm compliance with environmental and health protection standards and requirements. The report also presents the status of remedial activities and the results of monitoring these activities to assess their impacts on the public and environment. The scope of the environmental monitoring program at the Weldon Spring site has changed since it was initiated. Previously, the program focused on investigations of the extent and level of contaminants in the groundwater, surface waters, buildings, and air at the site. In 1992, the level of remedial activities required monitoring for potential impacts of those activities, particularly on surface water runoff and airborne effluents. This report includes monitoring data from routine radiological and nonradiological sampling activities. These data include estimates of dose to the public from the Weldon Spring site; estimates of effluent releases; and trends in groundwater contaminant levels. Also, applicable compliance requirements, quality assurance programs, and special studies conducted in 1992 to support environmental protection programs are reviewed.

Recent trend of administration on hot springs

Energy Technology Data Exchange (ETDEWEB)

Okubo, Shigeru [Environment Agency, Tokyo (Japan)

1989-01-01

The Environmental Agency exercises jurisdiction over Hot Spring Act, and plans to protect the source of the hot spring and to utilize it appropriately. From the aspect of utilization, hot springs are widely used as a means to remedy chronic diseases and tourist spots besides places for recuperation and repose. Statistics on Japanese hot springs showed that the number of hot spring spots and utilized-fountainhead increased in 1987, compared with the number in 1986. Considering the utilized-headspring, the number of naturally well-out springs has stabilized for 10 years while power-operated springs have increased. This is because the demand of hot springs has grown as the number of users has increased. Another reason is to keep the amount of hot water by setting up the power facility as the welled-out amount has decreased. Major point of recent administration on the hot spring is to permit excavation and utilization of hot springs. Designation of National hot spring health resorts started in 1954 in order to ensure the effective and original use of hot springs and to promote the public use of them, for the purpose of arranging the sound circumstances of hot springs. By 1988, 76 places were designated. 4 figs., 3 tabs.

Reports on the AAAI 1999 Workshop Program

OpenAIRE

Drabble, Brian; Chaudron, Laurent; Tessier, Catherine; Abu-Hakima, Sue; Willmott, Steven; Austin, Jim; Faltings, Boi; Freuder, Eugene C.; Friedrich, Gerhard; Freitas, Alex A.; Cortes, U.; Sanchez-Marre, M.; Aha, David W.; Becerra-Fernandez, Irma; Munoz-Avila, Hector

2000-01-01

The AAAI-99 Workshop Program (a part of the sixteenth national conference on artificial intelligence) was held in Orlando, Florida. The program included 16 workshops covering a wide range of topics in AI. Each workshop was limited to approximately 25 to 50 participants. Participation was by invitation from the workshop organizers. The workshops were Agent-Based Systems in the Business Context, Agents' Conflicts, Artificial Intelligence for Distributed Information Networking, Artificial Intell...

Delineating spring recharge areas in a fractured sandstone aquifer (Luxembourg) based on pesticide mass balance

Science.gov (United States)

Farlin, J.; Drouet, L.; Gallé, T.; Pittois, D.; Bayerle, M.; Braun, C.; Maloszewski, P.; Vanderborght, J.; Elsner, M.; Kies, A.

2013-06-01

A simple method to delineate the recharge areas of a series of springs draining a fractured aquifer is presented. Instead of solving the flow and transport equations, the delineation is reformulated as a mass balance problem assigning arable land in proportion to the pesticide mass discharged annually in a spring at minimum total transport cost. The approach was applied to the Luxembourg Sandstone, a fractured-rock aquifer supplying half of the drinking water for Luxembourg, using the herbicide atrazine. Predictions of the recharge areas were most robust in situations of strong competition by neighbouring springs while the catchment boundaries for isolated springs were extremely sensitive to the parameter controlling flow direction. Validation using a different pesticide showed the best agreement with the simplest model used, whereas using historical crop-rotation data and spatially distributed soil-leaching data did not improve predictions. The whole approach presents the advantage of integrating objectively information on land use and pesticide concentration in spring water into the delineation of groundwater recharge zones in a fractured-rock aquifer.

#ClimateEdCommunity : Field Workshops Bring Together Teachers and Researchers to Make Meaning of Science and Classroom Integration

Science.gov (United States)

Bartholow, S.; Warburton, J.; Wood, J. H.; Steiner, S. M.

2015-12-01

Seeing Understanding and Teaching: Climate Change in Denali is a four-day immersive teacher professional development course held in Denali National Park. Developed through three partner organizations, the course aims to develop teachers' skills for integrating climate change content into their classrooms. This presentation aims to share tangible best practices for linking researchers and teachers in the field, through four years of experience in program delivery and reported through a published external evaluation. This presentation will examine the key aspects of a successful connection between teachers, researchers, science, and classrooms: (1) Inclusion of teacher leaders, (2) dedicated program staff, (3) workshop community culture, and will expose barriers to this type of collaboration including (1) differences in learning style, (2) prior teaching experience, (3) existing/scaffolding understanding of climate change science, and (4) accessibility of enrollment and accommodations for the extended learning experience. Presentation Content Examples:Participants overwhelmingly value the deep commitment this course has to linking their field experience to the classroom attributing to the role of a teacher-leader; an expert science teacher with first-hand field research experience in the polar regions. The goal of including a teacher-leader is to enhance translatability between fieldwork and the classroom. Additionally, qualitative aspects of the report touches on the intangible successes of the workshop such as: (1) the creation of a non-judgmental learning atmosphere, (2) addressing accessibility to science learning tools in rural and under-served communities, (3) defining successful collaboration as making meaning together through exploratory questioning while in the field (4) discussed the social and cultural implications of climate change, and the difficulty of navigating these topics in educational and/or multicultural spaces. Next Steps? Create a #Climate

PV radiometrics workshop proceedings

Energy Technology Data Exchange (ETDEWEB)

Myers, D.R.

1995-09-01

This report documents presentations and discussions held at the Photovoltaics Radiometeric Measurements Workshop conducted at Vail, Colorado, on July 24 and 25, 1995. The workshop was sponsored and financed by the Photovoltaic Module and Systems Performance and Engineering Project managed by Richard DeBlasio, Principal Investigator. That project is a component of the National Renewable Energy Laboratory (NREL) Photovoltaic Research and Development Program, conducted by NREL for the US Department of Energy, through the NREL Photovoltaic Engineering and Applications Branch, managed by Roland Hulstrom. Separate abstracts have been prepared for articles from this workshop.

North Region ROW tool implementation workshop.

Science.gov (United States)

2010-08-02

Welcome to the North Region ROW Tool Workshop. This workshop is funded under an implementation project sponsored by TxDOTs Research & Technology Implementation Office (RTI). This is the second of four regional workshops being planned for this summ...

EDITORIAL: The Fourth International Workshop on Microfactories (IWMF'04)

Science.gov (United States)

Chu, Jiaru; Maeda, Ryutaro

2005-10-01

This special section of Journal of Micromechanics and Microengineering is devoted to the fourth International Workshop on Microfactories. After the first three successful Workshops, which took place in Tsukuba, Japan in 1998, Fribourg, Switzerland in 2000 and Minneapolis, USA in 2002, the fourth (IWMF'04) was held in Shanghai, China on 15-17 October 2004. The concept of the `microfactory' and miniaturized production systems was first proposed by the Mechanical Engineering Laboratory in Japan who demonstrated the feasibility of downsizing energy-saving, distributed and eventually environmentally conscious manufacturing systems. There is incredible potential in reducing the physical scale of numerous processes related to the manufacture of many forms of future dense `mechatronic' products and in the manipulation of microscopic and nanoscopic objects and materials for the benefit of mankind. Small systems capable of these operations can be referred to as `microfactories'. A worldwide effort is currently underway to bring such microfactories to fruition. MEMS, MST and micromachines are regarded as synonyms, but they do not necessarily have the same meaning. In particular, differences can be found in their technological approaches. Roughly speaking, research and development in the USA is based primarily on surface or bulk silicon micromachining processes, and the ideal realization of MEMS seems to be the monolithic device. The European approach also focuses on integration between electronics and mechanics but, especially in connection with the development of `µTAS', it also demands the integration of non-mechanical components into the system. In Japan the approaches for MST are said to be rather less focused. Besides the above-mentioned `classical' microsystem technologies, down-scaling of conventional manufacturing methods, or non-silicon based device processing within this field, completely new technological methods are also considered as `microsystem technologies

AECB workshop on seismic hazard assessment in southern Ontario

International Nuclear Information System (INIS)

Stepp, J.C.; Price, R.A.; Coppersmith, K.J.; Klimkiewicz, G.C.; McGuire, R.K.

1995-10-01

The purpose of the workshop was to review available geological and seismological data which could affect earthquake occurrence in southern Ontario and to develop a consensus on approaches that should be adopted for characterization of seismic hazard. The workshop was structured in technical sessions to focus presentations and discussions on four technical issues relevant to seismic hazard in southern Ontario, as follows: (1) The importance of geological and geophysical observations for the determination of seismic sources, (2) Methods and approaches which may be adopted for determining seismic sources based on integrated interpretations of geological and seismological information, (3) Methods and data which should be used for characterizing the seismicity parameters of seismic sources, and (4) Methods for assessment of vibratory ground motion hazard. The format of each session involved invited presentations of relevant data followed by open presentations by participants, a general discussion focusing on the relevance of the presented information for seismic hazard assessment in southern Ontario, then development of conclusions and recommendations. In the final session, the conclusions and recommendations were summarized and an open discussion was held to develop consensus. This report presents perspective summaries of the workshop technical sessions together with conclusions and recommendations prepared by the session chairs and the general chairman. 2 refs

A Faculty Workshop Model to Integrate Climate Change across the Curriculum

Science.gov (United States)

Teranes, J. L.

2017-12-01

Much of the growing scientific certainty of human impacts on the climate system, and the implications of these impacts on current and future generations, have been discovered and documented in research labs in colleges and universities across the country. Often these institutions also take decisive action towards combatting climate change, by making significant reductions in greenhouse emissions and pledging to greater future reductions. Yet, there are still far too many students that graduate from these campuses without an adequate understanding of how climate change will impact them within their lifetimes and without adequate workforce preparation to implement solutions. It may be that where college and universities still have the largest influence on climate change adaption and mitigation is in the way that we educate students. Here I present a curriculum workshop model at UC San Diego that leverages faculty expertise to infuse climate change education across disciplines to enhance UC San Diego students' climate literacy, particularly for those students whose major focus is not in the geosciences. In this model, twenty faculty from a breadth of disciplines, including social sciences, humanities, arts, education, and natural sciences participated in workshops and developed curricula to infuse aspects of climate change into their existing undergraduate courses. We particularly encouraged development of climate change modules in courses in the humanities, social sciences and arts that are best positioned to address the important human and social dimensions of climate change. In this way, climate change content becomes embedded in current course offerings, including non-science courses, to increase climate literacy among a greater number and a broader cross-section of students.

Spring security 3.x cookbook

CERN Document Server

Mankale, Anjana

2013-01-01

This book follows a cookbook style exploring various security solutions provided by Spring Security for various vulnerabilities and threat scenarios that web applications may be exposed to at the authentication and session level layers.This book is for all Spring-based application developers as well as Java web developers who wish to implement robust security mechanisms into web application development using Spring Security.Readers are assumed to have a working knowledge of Java web application development, a basic understanding of the Spring framework, and some knowledge of the fundamentals o

Geochemical and hydrologic data for wells and springs in thermal-spring areas of the Appalachians

Energy Technology Data Exchange (ETDEWEB)

Hobba, W.A. Jr.; Chemerys, J.C.; Fisher, D.W.; Pearson, F.J. Jr.

1976-07-01

Current interest in geothermal potential of thermal-spring areas in the Appalachians makes all data on thermal springs and wells in these areas valuable. Presented here without interpretive comment are maps showing selected springs and wells and tables of physical and chemical data pertaining to these wells and springs. The chemical tables show compositions of gases (oxygen, nitrogen, argon, methane, carbon dioxide, and helium), isotope contents (tritium, carbon (13), and oxygen (18)), trace and minor element chemical data, and the usual complete chemical data.

Dynamic defense workshop :

Energy Technology Data Exchange (ETDEWEB)

Crosby, Sean Michael; Doak, Justin E.; Haas, Jason Juedes.; Helinski, Ryan; Lamb, Christopher C.

2013-02-01

On September 5th and 6th, 2012, the Dynamic Defense Workshop: From Research to Practice brought together researchers from academia, industry, and Sandia with the goals of increasing collaboration between Sandia National Laboratories and external organizations, de ning and un- derstanding dynamic, or moving target, defense concepts and directions, and gaining a greater understanding of the state of the art for dynamic defense. Through the workshop, we broadened and re ned our de nition and understanding, identi ed new approaches to inherent challenges, and de ned principles of dynamic defense. Half of the workshop was devoted to presentations of current state-of-the-art work. Presentation topics included areas such as the failure of current defenses, threats, techniques, goals of dynamic defense, theory, foundations of dynamic defense, future directions and open research questions related to dynamic defense. The remainder of the workshop was discussion, which was broken down into sessions on de ning challenges, applications to host or mobile environments, applications to enterprise network environments, exploring research and operational taxonomies, and determining how to apply scienti c rigor to and investigating the eld of dynamic defense.

The state-of-the-art port of entry workshop

Energy Technology Data Exchange (ETDEWEB)

Godfrey, B.

1995-05-01

The increased demand for freight movements through international ports of entry and the signing of the North American Free Trade Agreement (NAFTA) have increased freight traffic at border ports of entry. The State-of-the-Art Port of Entry Workshop initiated a dialogue among technologists and stakeholders to explore the potential uses of technology at border crossings and to set development priorities. International ports of entry are both information and labor intensive, and there are many promising technologies that could be used to provide timely information and optimize inspection resources. Participants universally held that integration of technologies and operations is critical to improving port services. A series of Next Steps was developed to address stakeholder issues and national priorities, such as the National Transportation Policy and National Drug Policy. This report documents the views of the various stakeholders and technologists present at the workshop and outlines future directions of study.

Nuclear materials transportation workshops: USDOE outreach to local governments

International Nuclear Information System (INIS)

1987-01-01

To provide direct outreach to local governments, the Transportation Management Division of the United States Department of Energy asked the Urban Consortium and its Energy Task Force to assemble representatives for two workshops focusing on the transport of nuclear materials. The first session, for jurisdictions east of the Mississippi River, was held in New Orleans on May 5--6, 1988; the second was conducted on June 6--7, 1988 in Denver for jurisdictions to the west. Twenty local government professionals with management or operational responsibility for hazardous materials transportation within their jurisdictions were selected to attend each workshop. The discussions identified five major areas of concern to local government professionals; coordination; training; information resources; marking and placarding; and responder resources. Integrated federal, state, and local levels of government emerged as a priority coordination issue along with the need for expanded availability of training and training resources for first-reponders

Report on the Workshop on Accelerated Nuclear Energy Materials Development

Energy Technology Data Exchange (ETDEWEB)

King, Wayne E. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Allen, Todd [Univ. of Wisconsin, Madison, WI (United States); Arsenlis, Tom [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Bench, Graham [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Bulatov, Vasily [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Fluss, Michael [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Klein, Richard [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); McMahon, Donn [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Middleton, Carolin [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Morley, Maureen [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Pasamehmetoglu, Kemal [Idaho National Lab. (INL), Idaho Falls, ID (United States); Turchi, Patrice [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Was, Gary [Univ. of Michigan, Ann Arbor, MI (United States)

2010-05-11

This document reports on the Office of Nuclear Energy’s (NE’s) Workshop on Accelerated Nuclear Energy Materials Development held May 11, 2010, in Washington, DC. The purpose of the workshop was twofold: (1) to provide feedback on an initiative to use uncertainty quantification (UQ) to integrate theory, simulation, and modeling with accelerated experimentation to predict the behavior of materials and fuels in an irradiation environment and thereby accelerate the lengthy materials design and qualification process; and (2) to provide feedback on and refinement to five topical areas to develop predictive models for fuels and cladding and new radiation-tolerant materials. The goal of the workshop was to gather technical feedback with respect to the Office of Nuclear Energy’s research and development while also identifying and highlighting crosscutting capability and applicability of the initiative to other federal offices, including the Department of Energy’s (DOE’s) National Nuclear Security Administration (NNSA), Nuclear Regulatory Commission (NRC), DOE Office of Basic Energy Sciences (BES), DOE Office of Fusion Energy Sciences (FES), and Naval Reactors. The goals of the initiative are twofold: (1) develop time- and length-scale transcending models that predict material properties using UQ to effectively integrate theory, simulation, and modeling with accelerated experiments; and (2) design and develop new radiation-tolerant materials using the knowledge gained and methodologies created to shorten the development and qualification time and reduce cost. The initiative is crosscutting and has synergy with industry and other federal offices including Naval Reactors, NRC, FES, BES, and the Office of Advanced Scientific Computing Research (ASCR). It is distinguished by its use of uncertainty quantification to effectively integrate theory, simulation, and modeling with high-dose experimental capabilities. The initiative aims to bring the methodology that is being

Prediction of daily spring hydrographs for future climatic scenarios based on an integrated numerical modelling approach: Application on a snow-governed semi- arid karst catchment area.

Science.gov (United States)

Doummar, J.; Kassem, A.; Gurdak, J. J.

2017-12-01

In the framework of a three-year USAID/NSF- funded PEER Science project, flow in a karst system in Lebanon (Assal Spring; discharge 0.2-2.5 m3/s yearly volume of 22-30 Mm3) dominated by snow and semi arid conditions was simulated using an integrated numerical model (Mike She 2016). The calibrated model (Nash-Sutcliffe coefficient of 0.77) is based on high resolution input data (2014-2017) and detailed catchment characterization. The approach is to assess the influence of various model parameters on recharge signals in the different hydrological karst compartments (Atmosphere, unsaturated zone, and saturated zone) based on an integrated numerical model. These parameters include precipitation intensity and magnitude, temperature, snow-melt parameters, in addition to karst specific spatially distributed features such as fast infiltration points, soil properties and thickness, topographical slopes, Epikarst and thickness of unsaturated zone, and hydraulic conductivity among others. Moreover, the model is currently simulated forward using various scenarios for future climate (Global Climate Models GCM; daily downscaled temperature and precipitation time series for Lebanon 2020-2045) in order to depict the flow rates expected in the future and the effect of climate change on hydrographs recession coefficients, discharge maxima and minima, and total spring discharge volume . Additionally, a sensitivity analysis of individual or coupled major parameters allows quantifying their impact on recharge or indirectly on the vulnerability of the system (soil thickness, soil and rock hydraulic conductivity appear to be amongst the highly sensitive parameters). This study particularly unravels the normalized single effect of rain magnitude and intensity, snow, and temperature change on the flow rate (e.g., a change of temperature of 3° on the catchment yields a Residual Mean Square Error RMSE of 0.15 m3/s in the spring discharge and a 16% error in the total annual volume with

Drivers of plant species composition in siliceous spring ecosystems: groundwater chemistry, catchment traits or spatial factors?

Directory of Open Access Journals (Sweden)

Carl BEIERKUHNLEIN

2009-08-01

Full Text Available Spring water reflects the hydrochemistry of the aquifer in the associated catchments. On dense siliceous bedrock, the nearsurface groundwater flow is expected to be closely related to the biogeochemical processes of forest ecosystems, where the impact of land use is also low. We hypothesize that the plant species composition of springs mainly reflects hydrochemical conditions. Therefore, springs may serve as indicator systems for biogeochemical processes in complex forest ecosystems. To test this hypothesis, we investigate the influence of spring water chemical properties, catchment traits, and spatial position on plant species composition for 73 springs in forested catchments in central Germany, using non-metric multidimensional scaling (NMDS, Mantel tests, and path analyses. Partial Mantel tests and path analyses reveal that vegetation is more greatly influenced by spring water chemistry than by catchment traits. Consequently, the catchment's influence on vegetation is effective in an indirect way, via spring water. When considering spatial aspects (in particular altitude in addition, the explanatory power of catchment traits for spring water properties is reduced almost to zero. As vegetation shows the highest correlation with the acidity gradient, we assume that altitude acts as a sum parameter that incorporates various acidifying processes in the catchment. These processes are particularly related to altitude – through bedrock, climatic parameters and forest vegetation. The species composition of undisturbed springs is very sensitive in reflecting such conditions and may serve as an integrative tool for detecting complex ecological processes.

Summer workshops for high-school science teachers

International Nuclear Information System (INIS)

Young, H.H.; Kohl, J.

1975-01-01

A total of 52 summer workshops attended by over 1700 high-school science teachers have been given by 27 universities in the period of 1971 to 1974. These workshops are funded by ERDA to provide factual material through educational channels so that the public could obtain an informed perspective of the role of nuclear energy as an electrical power source. The workshops have included lectures, panel discussions, laboratories, and field trips, and have emphasized providing teachers with materials for use in their classrooms. Actual use of workshop material has been monitored through workshop reports, meetings, and visits. Participants have used their workshop experience for classroom presentations, talks to the public, and for assembly programs. The material developed and the experience of presenting it has proved valuable for the nuclear engineering faculty members giving the workshops. They have used their experience in other courses, for public lectures, and for other workshops. And they have gained personal experience in methods of dealing with the nuclear power controversy. A review of these workshops indicates that they offer at a reasonable cost a productive method of presenting factual information on the various solutions to the complex electrical generation problem

Reports on the 2015 AAAI Workshop Program

OpenAIRE

Albrecht, Stefano V.; Beck, J. Christopher; Buckeridge, David L.; Botea, Adi; Caragea, Cornelia; Chi, Chi-hung; Damoulas, Theodoros; Dilkina, Bistra; Eaton, Eric; Fazli, Pooyan; Ganzfried, Sam; Giles, C. Lee; Guillet, Sébastian; Holte, Robert; Hutter, Frank

2015-01-01

AAAI's 2015 Workshop Program was held Sunday and Monday, January 25–26, 2015 at the Hyatt Regency Austin Hotel in Austion, Texas, USA. The AAAI-15 workshop program included 15 workshops covering a wide range of topics in artificial intelligence. Most workshops were held on a single day. The titles of the workshops included AI and Ethics, AI for Cities, AI for Transportation: Advice, Interactivity and Actor Modeling, Algorithm Configuration, Artificial Intelligence Applied to Assistive Technol...

NKS Workshop on Radioanalytical Chemistry - Final report

DEFF Research Database (Denmark)

The NKS-B workshop on radioanalytical chemistry was held 2-6th Sept 2013 at Risø, Denmark. There were a total of 49 persons participating in the workshop, including 32 young participants and 15 lecturers. The work-shop started with 3 days of lab practice followed by 1.5 day’s lectures by the expe......The NKS-B workshop on radioanalytical chemistry was held 2-6th Sept 2013 at Risø, Denmark. There were a total of 49 persons participating in the workshop, including 32 young participants and 15 lecturers. The work-shop started with 3 days of lab practice followed by 1.5 day’s lectures...

Spring Recipes A Problem-solution Approach

CERN Document Server

Long, Josh; Mak, Gary

2010-01-01

With over 3 Million users/developers, Spring Framework is the leading "out of the box" Java framework. Spring addresses and offers simple solutions for most aspects of your Java/Java EE application development, and guides you to use industry best practices to design and implement your applications. The release of Spring Framework 3 has ushered in many improvements and new features. Spring Recipes: A Problem-Solution Approach, Second Edition continues upon the bestselling success of the previous edition but focuses on the latest Spring 3 features for building enterprise Java applications.

2017 Marine Hydrokinetic Instrumentation Workshop Report

Energy Technology Data Exchange (ETDEWEB)

Driscoll, Frederick R [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Mauer, Erik [U.S. Department of Energy; Rieks, Jeff [Allegheny Science and Technologies

2018-03-06

The third Marine Hydrokinetic Instrumentation Workshop was held at Florida Atlantic University's Sea Tech Campus in Dania Beach, Florida, from February 28 to March 1, 2017. The workshop brought together 37 experts in marine energy measurement, testing, and technology development to present and discuss the instrumentation and data-processing needs of the marine energy industry. The workshop was comprised of a plenary session followed by two focused breakout sessions. The half-day plenary session reviewed findings from prior instrumentation workshops, presented research activities that aim to fill previously identified gaps, and had industry experts present the state of the marine energy measurement technologies. This report provides further detail on the workshop, objectives, and findings.

Physics Analysis Tools Workshop Report

CERN Multimedia

Assamagan, K A

A Physics Analysis Tools (PAT) workshop was held at the University of Tokyo in Tokyo Japan on May 15-19, 2006. Unlike the previous ones, this workshop brought together the core PAT developers and ATLAS users. The workshop was attended by 69 people from various institutions: Australia 5 Canada 1 China 6 CERN 4 Europe 7 Japan 32 Taiwan 3 USA 11 The agenda consisted of a 2-day tutorial for users, a 0.5-day user feedback discussion session between users and developers, and a 2-day core PAT workshop devoted to issues in Physics Analysis Tools activities. The tutorial, attended by users and developers, covered the following grounds: Event Selection with the TAG Event Selection Using the Athena-Aware NTuple Event Display Interactive Analysis within ATHENA Distributed Analysis Monte Carlo Truth Tools Trigger-Aware Analysis Event View By many accounts, the tutorial was useful. This workshop was the first time that the ATLAS Asia-Pacific community (Taiwan, Japan, China and Australia) go...

Systems Engineering 2010 Workshop | Wind | NREL

Science.gov (United States)

0 Workshop Systems Engineering 2010 Workshop The 1st NREL Wind Energy Systems Engineering Workshop of the system engineering model. In the middle of the model is optimization, metric tracking &M model, capital cost model, and balance of station. Systems engineering represents a holistic

SPLASH'13 workshops summary

DEFF Research Database (Denmark)

Balzer, S.; Schultz, U. P.

2013-01-01

Following its long-standing tradition, SPLASH 2013 will host 19 high-quality workshops, allowing their participants to meet and discuss research questions with peers, to mature new and exciting ideas, and to build up communities and start new collaborations. SPLASH workshops complement the main t...

6th International Microbeam Workshop

Energy Technology Data Exchange (ETDEWEB)

Dr Kevin M. Prise

2004-01-01

The extended abstracts which are submitted here present a summary of the proceedings of the 6th International Workshop/12th LH Gray Workshop: Microbeam Probes of Cellular Radiation Response, held at St. Catherine's College, University of Oxford, UK on March, 29th-31st, 2003. In 1993 the 4th LH Gray Workshop entitled ''Microbeam Probes of Cellular Radiation Response'' was held at the Gray Cancer Institute in Northwood. This was organized by Prof BD Michael, Dr M. Folkard and Dr KM Prise and brought together 40 participants interested in developing and applying new microbeam technology to problems in radiation biology (1). The workshop was an undoubted success and has spawned a series of subsequent workshops every two years. In the past, these workshops have been highly successful in bringing together groups interested in developing and applying micro-irradiation techniques to the study of cell and tissue damage by ionizing radiations. Following the first microbeam workshop, there has been a rapid growth in the number of centres developing radiobiology microbeams, or planning to do so and there are currently 15-20 worldwide. Much of the recent research using microbeams has used them to study low-dose effects and ''non-targeted'' responses such bystander effects, genomic instability and adaptive responses. The goal of the 6th workshop was to build on our knowledge of the development of microbeam approaches and the application to radiation biology in the future with the meeting stretching over a 3 day period. Over 80 participants reviewed the current state of radiobiology microbeam research worldwide and reported on new technological developments both in the fields of physics and biology.

PREFACE: The 8th Workshop on Frontiers in Low Temperature Plasma Diagnostics The 8th Workshop on Frontiers in Low Temperature Plasma Diagnostics

Science.gov (United States)

Sadeghi, Nader; Czarnetzki, Uwe

2010-03-01

The 8th Workshop on Frontiers in Low Temperature Plasma Diagnostics (FLTPD) was held in Blansko, near Brno, Czech Republic. FLTPD is a biennial European event in which scientists working on low temperature plasmas present their recent results, pointing out in particular the originality of the diagnostic techniques used. The idea of starting this series of workshops was born out of a discussion between Frieder Döbele, Bill Graham and one of us when travelling together from Bar Harbor, USA (after the 6th LAPD) to Montreal, Canada, in October 1993. It became evident that we had been lacking a European meeting that could bring together experts in the field of low temperature plasma diagnostics and facilitate sharing the knowledge of these diagnostics with a new generation of scientists. The first FLTPD was held in Les Houches, France, in February 1995. Since then it has been held in the spring of every other year in different European countries, as shown below. The next meeting will be held in Zinnowitz, near Greifswald, Germany, in May 2011. Year Location Chair of LOC 1995 Les Houches, France J Derouard 1997 Bad Honnef, Germany F Döbele 1999 Saillon, Switzerland Ch Hollenstein 2001 Rolduc, The Netherlands R van de Sanden 2003 Specchia, Italy S De Benedictis 2005 Les Houches, France N Sadeghi 2007 Cumbria, United Kingdom M Bowden 2009 Blansko, Czech Republic F Krčma To favour brainstorming and extended discussions between participants, FLTPD meetings have always been organized in isolated locations with the number of attendees limited to about 70. Workshops are held over three and a half days with about ten expert presentations by invited speakers (a few from overseas), as well as short oral or poster contributions. This special issue of Journal of Physics D: Applied Physics contains 20 articles representative of contributions to the last FLTPD in Blansko. All invited speakers and others who gave presentations, as selected by the Scientific Committee, were invited

Quarry geotechnical report for the Weldon Spring Site Remedial Action Project, Weldon Spring, Missouri

International Nuclear Information System (INIS)

1990-11-01

This report has been prepared for the United States Department of Energy's (DOE) Weldon Spring Site Remedial Action Project (WSSRAP) by the Project Management Contractor (PMC), which is MK-Ferguson Company (MK-Ferguson) with Jacobs Engineering Group (JEG) as its designated subcontractor. The Weldon Spring site (WSS) comprises the Weldon Spring quarry area and the Weldon Spring chemical plant and raffinate pit areas. This report presents the results of geotechnical investigations conducted during 1989--1990 at the proposed Weldon Spring quarry staging and water treatment facilities in the quarry area. The facilities are intended for treatment of water removed from the quarry area. An access road and a decontamination pad will be necessary for handling and transportation of bulk waste. Results of previous geotechnical investigations performed by other geoscience and environmental engineering firms in the quarry area, were reviewed, summarized and incorporated into this report. Well logging, stratigraphy data, piezometer data, elevations, and soil characteristics are also included

Nuclear Innovation Workshops Report

Energy Technology Data Exchange (ETDEWEB)

Jackson, John Howard [Idaho National Lab. (INL), Idaho Falls, ID (United States); Allen, Todd Randall [Idaho National Lab. (INL), Idaho Falls, ID (United States); Hildebrandt, Philip Clay [Idaho National Lab. (INL), Idaho Falls, ID (United States); Baker, Suzanne Hobbs [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2015-09-01

The Nuclear Innovation Workshops were held at six locations across the United States on March 3-5, 2015. The data collected during these workshops has been analyzed and sorted to bring out consistent themes toward enhancing innovation in nuclear energy. These themes include development of a test bed and demonstration platform, improved regulatory processes, improved communications, and increased public-private partnerships. This report contains a discussion of the workshops and resulting themes. Actionable steps are suggested at the end of the report. This revision has a small amount of the data in Appendix C removed in order to avoid potential confusion.

Spring ligament complex: Illustrated normal anatomy and spectrum of pathologies on 3T MR imaging

Energy Technology Data Exchange (ETDEWEB)

Omar, Hythem [Musculoskeletal Radiology, UT Southwestern Medical Center, Dallas, TX (United States); Saini, Vikram [Center for Infection and Inflammation Imaging Research, Johns Hopkins University, Baltimore, MD (United States); Wadhwa, Vibhor [Department of Radiology, University of Arkansas for Medical Sciences, Little Rock, AR (United States); Liu, George [Orthopaedic Surgery, UT Southwestern Medical Center, Dallas, TX (United States); Chhabra, Avneesh, E-mail: avneesh.chhabra@utsouthwestern.edu [Musculoskeletal Radiology, UT Southwestern Medical Center, Dallas, TX (United States)

2016-11-15

Highlights: • The Spring ligament complex is an important stabilizer of medial arch of foot. • Of all SLC components, the integrity of Supero-Medial band is the most important. • Associated pathologies with SLC instability include PTT injury, pes planovalgus and sinus tarsi syndrome. • Conservative and operative management are viable depending on pes planovalgus progression. - Abstract: The spring (plantar calcaneonavicular) ligament complex connects the calcaneus and navicular bone of the foot and serves as the primary static stabilizer of the medial longitudinal arch of the foot. In this article, we describe the normal anatomy of the spring ligament complex, illustrate 3T magnetic resonance imaging appearances in its normal and abnormal states, and discuss the pathological associations with relevant case examples.

IFPA Meeting 2013 Workshop Report II

DEFF Research Database (Denmark)

Ackerman, W E; Adamson, L; Carter, Anthony Michael

2013-01-01

Workshops are an important part of the IFPA annual meeting as they allow for discussion of specialized topics. At the IFPA meeting 2013 twelve themed workshops were presented, five of which are summarized in this report. These workshops related to various aspects of placental biology but collecti...

IFPA meeting 2012 workshop report I

DEFF Research Database (Denmark)

Ackerman, W E; Carter, Anthony Michael; De Mestre, A M

2013-01-01

Workshops are an important part of the IFPA annual meeting as they allow for discussion of specialized topics. At IFPA meeting 2012 there were twelve themed workshops, three of which are summarized in this report. These workshops related to various aspects of placental biology but collectively...

Spring/dimple instrument tube restraint

International Nuclear Information System (INIS)

DeMario, E.E.; Lawson, C.N.

1993-01-01

A nuclear fuel assembly for a pressurized water nuclear reactor has a spring and dimple structure formed in a non-radioactive insert tube placed in the top of a sensor receiving instrumentation tube thimble disposed in the fuel assembly and attached at a top nozzle, a bottom nozzle, and intermediate grids. The instrumentation tube thimble is open at the top, where the sensor or its connection extends through the cooling water for coupling to a sensor signal processor. The spring and dimple insert tube is mounted within the instrumentation tube thimble and extends downwardly adjacent the top. The springs and dimples restrain the sensor and its connections against lateral displacement causing impact with the instrumentation tube thimble due to the strong axial flow of cooling water. The instrumentation tube has a stainless steel outer sleeve and a zirconium alloy inner sleeve below the insert tube adjacent the top. The insert tube is relatively non-radioactivated inconel alloy. The opposed springs and dimples are formed on diametrically opposite inner walls of the insert tube, the springs being formed as spaced axial cuts in the insert tube, with a web of the insert tube between the cuts bowed radially inwardly for forming the spring, and the dimples being formed as radially inward protrusions opposed to the springs. 7 figures

Evaluation of the Career Planning Workshop

Energy Technology Data Exchange (ETDEWEB)

Gibson, L.W.

1986-04-01

People who apply to participate in this workshop appear to be genuinely interested in personal development. Participants reported that they were not very happy with several aspects of their jobs prior to the workshop. Predominant personality characteristics of the participants were shyness, communication anxiety, reserved style, cautiousness, moodiness, energetic, hard-working and analytical minded. Participants were favorably impressed with the workshop. One of the most potent ways that the workshop impacts participants is through improved self understanding and enhanced self-esteem. Many people did change jobs following the workshop. Of those who did not actually change jobs, almost half reported that they had modified their present job to achieve a better person-job fit. Participants did not report many changes in their routine behavior although they kept the supervisor more informed of their job activity. Current job satisfaction is good among the participants. Although the workshop is fairly expensive to provide, the long range benefits in terms of enhanced levels of performance far outweigh the costs.

1998 federal technical standards workshop: Proceedings

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-10-01

The theme for the 1998 workshop was Standards Management -- A World of Change and Opportunities. The workshop`s goal was to further the implementation of the National Technology Transfer and Advancement Act of 1995 (Public Law 104-113) through the sharing of standards management success stories, lessons learned, and emerging initiatives within the Executive Branch of the Federal Government. The target audience for this workshop included agency/department and contractor personnel and representatives of standards developing organizations that either used technical standards in their work for the Federal Government of participated in standards writing/management activities in support of the missions and programs of Federal agencies/departments. As with previous standards workshops sponsored by the DOE, views on the technical subject areas under the workshop theme were solicited from and provided by agency Standards Executives and standards program managers, voluntary standards organizations, and the private sector. This report includes vugraphs of the presentations.

AECB workshop on seismic hazard assessment in Southern Ontario. Program, list of participants and abstracts

International Nuclear Information System (INIS)

1995-01-01

The purpose of the workshop was to review available geological and seismological data which could affect earthquake occurrence in southern Ontario and to develop a consensus on approaches that should be adopted for characterization of seismic hazard. The workshop was structured in technical sessions to focus presentations and discussions on four technical issues relevant to seismic hazard in southern Ontario, as follows: (1) The importance of geological and geophysical observations for the determination of seismic sources, (2) Methods and approaches which may be adopted for determining seismic sources based on integrated interpretations of geological and seismological information, (3) Methods and data which should be used for characterizing the seismicity parameters of seismic sources, and (4) Methods for assessment of vibratory ground motion hazard. This document presents a copy of the workshop program, the list of participants and extended abstracts received from speakers. It was distributed to the participants prior to the workshop. The abstracts were intended to provide advance information and to afford some basis for meaningful discussion and exchange of information

Proceedings of a workshop on uses of depleted uranium in storage, transportation and repository facilities

International Nuclear Information System (INIS)

1997-01-01

A workshop on the potential uses of depleted uranium (DU) in the repository was organized to coordinate the planning of future activities. The attendees, the original workshop objective and the agenda are provided in Appendices A, B and C. After some opening remarks and discussions, the objectives of the workshop were revised to: (1) exchange information and views on the status of the Department of Energy (DOE) activities related to repository design and planning; (2) exchange information on DU management and planning; (3) identify potential uses of DU in the storage, transportation, and disposal of high-level waste and spent fuel; and (4) define the future activities that would be needed if potential uses were to be further evaluated and developed. This summary of the workshop is intended to be an integrated resource for planning of any future work related to DU use in the repository. The synopsis of the first day's presentations is provided in Appendix D. Copies of slides from each presenter are presented in Appendix E

AECB workshop on seismic hazard assessment in Southern Ontario. Program, list of participants and abstracts

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-12-31

The purpose of the workshop was to review available geological and seismological data which could affect earthquake occurrence in southern Ontario and to develop a consensus on approaches that should be adopted for characterization of seismic hazard. The workshop was structured in technical sessions to focus presentations and discussions on four technical issues relevant to seismic hazard in southern Ontario, as follows: (1) The importance of geological and geophysical observations for the determination of seismic sources, (2) Methods and approaches which may be adopted for determining seismic sources based on integrated interpretations of geological and seismological information, (3) Methods and data which should be used for characterizing the seismicity parameters of seismic sources, and (4) Methods for assessment of vibratory ground motion hazard. This document presents a copy of the workshop program, the list of participants and extended abstracts received from speakers. It was distributed to the participants prior to the workshop. The abstracts were intended to provide advance information and to afford some basis for meaningful discussion and exchange of information.

Proceedings of a workshop on uses of depleted uranium in storage, transportation and repository facilities

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-12-31

A workshop on the potential uses of depleted uranium (DU) in the repository was organized to coordinate the planning of future activities. The attendees, the original workshop objective and the agenda are provided in Appendices A, B and C. After some opening remarks and discussions, the objectives of the workshop were revised to: (1) exchange information and views on the status of the Department of Energy (DOE) activities related to repository design and planning; (2) exchange information on DU management and planning; (3) identify potential uses of DU in the storage, transportation, and disposal of high-level waste and spent fuel; and (4) define the future activities that would be needed if potential uses were to be further evaluated and developed. This summary of the workshop is intended to be an integrated resource for planning of any future work related to DU use in the repository. The synopsis of the first day`s presentations is provided in Appendix D. Copies of slides from each presenter are presented in Appendix E.

"I'll never forget this": evaluating a pilot workshop in effective communication for dental students.

Science.gov (United States)

Lucander, Henriette; Knutsson, Kerstin; Salé, Hanna; Jonsson, Anders

2012-10-01

This study evaluated a pilot workshop for teaching communication skills to dental students. The methodology is based on an experiential learning approach, the use of realistic clinical scenarios, simulated patients, and an integrated teaching team of both educational researchers and dentists. Furthermore, the methodology was adapted for short workshops, which is thought to offer better possibilities for frequent and effective training of communication skills throughout the curriculum. The work-shop was piloted with groups of six to ten students from the sixth and tenth semesters (n=94). Results show that the majority of students found the tasks meaningful and well aligned with how they perceived their future profession as dentists. Most students also thought that they learned from the task. An interesting finding is that students not only found it instructive to practice how to communicate in authentic situations, but that they generally found the workshop to be thought-provoking while at the same time providing structure and intellectual tools for the future. A possible explanation for this finding is the sharing of explicit criteria for high-quality communication.

Modeling with finite element of the upper head spring; Modelizacion con elementos finitos del resorte del cabezal superior

Energy Technology Data Exchange (ETDEWEB)

Munoz Cardador, J.; Cerrain Arranz, A.

2013-07-01

The objective of this work is the development of a model of finite element of the upper head spring so that it can be used as a tool in the design of the same. For this purpose, simulates the behavior to compression spring of the integrated head 17 x 17 using a numerical model and are validated with experimental results obtained in tests conducted by ENUSA. The validated model is a new tool to the spring design of the upper head whose use can extend both for the evaluation of current designs as for the evaluation of new modifications.

ISEE-magnetopause observations - workshop results

International Nuclear Information System (INIS)

Paschmann, G.

1982-01-01

A brief history of ISEE magnetopause workshops held during 1977-1981 is presented, and an assessment of the activity of these workshops is made. Workshop results are surveyed, with attention given to magnetopause thickness and speed, large-scale reconnection, small-scale reconnection, magnetic field topology, plasma waves, boundary layer structure, surface waves, plasma origin, and the relationship between magnetopause and particle boundaries. Finally, a few topics that require particular attention in the future are mentioned

IFPA meeting 2010 workshop report I

DEFF Research Database (Denmark)

Abad, C.; Antczak, D.F.; Carvalho, J.

2011-01-01

Workshops are an important part of the IFPA annual meeting. At IFPA Meeting 2010 there were twelve themed workshops, six of which are summarized in this report. 1. The immunology workshop focused on normal and pathological functions of the maternal immune system in pregnancy. 2. The transport wor...

Determination of radon concentration in spring gases with a portable semiconductor detector

International Nuclear Information System (INIS)

Endo, K.; Yanaga, M.; Yoshikawa, H.; Horiuchi, K.; Nakahara, H.; Murakami, Y.

1985-01-01

A portable integrating radon meter, alpha METER-400, was tested. The instrument detects α-rays of energy greater than 2.59 MeV. With this detector, the concentration of 222 Rn in spring gases at volcanic regions was determined. The results were compared with those observed by the liquid scintillation counting method. (author)

River Intrusion in Karst Springs in Eogenetic Aquifers: Implications for Speleogenesis

Science.gov (United States)

Martin, J. B.; Gulley, J.; Screaton, E. J.

2008-12-01

Conceptual models of speleogenesis generally assume uni-directional transport in integrated conduit systems from discrete recharge points to discharge at karst springs. Estavelles, however, are karst springs that function intermittently as discrete recharge points when river stage rises more rapidly than local aquifer heads. As river water chemistry changes between baseflow and floods, estavelles should influence mass transport through (e.g. organic carbon, nutrients, and oxygen) and speleogenesis within karst systems. Estavelles are common in our study area in north-central Florida, particularly along the lower reaches of the Santa Fe River, where it flows across the unconfined karstic Floridan aquifer. River stage in this unconfined region can rise much faster than aquifer heads when large amounts of rain fall on the confined regions in its upper reaches. Backflooding into the estavelles during elevated river stage drives river water into the ground, causing some springs to reverse and other springs to recirculate large volumes of river water. Floodwaters originating in the confined region are highly undersaturated with respect to calcite, and thus river water transitions from slightly supersaturated to highly undersaturated with respect to calcite during flood events. As a result, conduits connected to estavelles are continuously enlarged as springs reverse or recirculate calcite-undersaturated river water. It has been suggested that currently flooded caves (i.e. karst conduits) associated with springs in Florida formed entirely underwater because speleothems, which are prevalent in flooded caves in the Yucatan and Bahamas, have not been observed by cave divers. Results of this study indicate that the absence of speleothems does not necessarily provide evidence of a continuous phreatic history for underwater caves. Instead speleothems that formed in caves while dry could have been dissolved by backflooding of estavelles with undersaturated water

[History of hot spring bath treatment in China].

Science.gov (United States)

Hao, Wanpeng; Wang, Xiaojun; Xiang, Yinghong; Gu Li, A Man; Li, Ming; Zhang, Xin

2011-07-01

As early as the 7th century B.C. (Western Zhou Dynasty), there is a recording as 'spring which contains sulfur could treat disease' on the Wentang Stele written by WANG Bao. Wenquan Fu written by ZHANG Heng in the Easten Han Dynasty also mentioned hot spring bath treatment. The distribution of hot springs in China has been summarized by LI Daoyuan in the Northern Wei Dynasty in his Shuijingzhu which recorded hot springs in 41 places and interpreted the definition of hot spring. Bencao Shiyi (by CHEN Cangqi, Tang Dynasty) discussed the formation of and indications for hot springs. HU Zai in the Song Dynasty pointed out distinguishing hot springs according to water quality in his book Yuyin Conghua. TANG Shenwei in the Song Dynasty noted in Jingshi Zhenglei Beiji Bencao that hot spring bath treatment should be combined with diet. Shiwu Bencao (Ming Dynasty) classified hot springs into sulfur springs, arsenicum springs, cinnabar springs, aluminite springs, etc. and pointed out their individual indications. Geologists did not start the work on distribution and water quality analysis of hot springs until the first half of the 20th century. There are 972 hot springs in Wenquan Jiyao (written by geologist ZHANG Hongzhao and published in 1956). In July 1982, the First National Geothermal Conference was held and it reported that there were more than 2600 hot springs in China. Since the second half of the 20th century, hot spring sanatoriums and rehabilitation centers have been established, which promoted the development of hot spring bath treatment.

Workshop of medical physics

International Nuclear Information System (INIS)

1988-01-01

This event was held in San Carlos de Bariloche, Argentine Republic from 14 th. through 18 th. November, 1988. A great part of the physicians in the area of medical physics participated in this workshop. This volume includes the papers presented at this Workshop of Medical Physics [es

Workshops on Writing Science

Indian Academy of Sciences (India)

2017-09-30

Sep 30, 2017 ... hands-on practice, feedback, mentoring and highly interactive sessions. The focus will be on work done as individuals and in teams. Maximum number of participants for the workshop is limited. The workshop is compulso- rily residential. Boarding and lodging free for selected candidates. Re-imbursement ...

Community impacts of mid-May frost event during an anomalously warm spring

Science.gov (United States)

Hufkens, K.; Sonnentag, O.; Keenan, T. F.; Richardson, A. D.; Melaas, E. K.; Bailey, A.; O'Keefe, J.; Friedl, M. A.

2011-12-01

Global land and ocean surface temperatures of 2010 have gone on record as one of the warmest of the last 131 years. In the northeastern US extraordinarily warm spring temperatures were recorded, averaging +3 °C above the long term mean, causing very early leaf development. However, the entire northeastern US region was hit by a severe frost event. Leveraging the coincidence of an anomalously warm spring and a late spring frost event we assess species specific responses of these combined extremes for three northern hardwood species(sugar maple, American beech, yellow birch) across an elevational gradient. We integrated ground observations with satellite and near-surface remote sensing data to address the following questions: 1) How did different species respond to a gradient in altitude / freezing temperatures? 2) How does phenological strategy influence this response? 3) To what extent were regional effects measurable? 4) How did the late spring frost event alter the carbon balance of a northern hardwood forest? 5) Finally, what changes do we foresee in community ecology? Our results show an early onset for all species, triggered by the anomalously warm spring. However, the three species responded differently to a late spring frost event. Where both yellow birch and American beech remained largely unaffected by frost, by comparison, sugar maple showed severe frost damage with increasing altitude resulting in leaf loss and delayed canopy development. Conservative estimates of gross carbon exchange losses due to the frost event ranged from 63 g C m-2 to 156 g C m-2, or ~5% to ~13 % of the annual gross carbon exchange of a northern hardwood forest. Our results suggest that the additional pressure on forest succession at high altitude range margins due to late spring frost events may provide a competitive advantage for yellow birch and American beech, at the expense of sugar maple. Consequently, a late spring frost does not only affect the short term carbon balance

VOCs elimination and health risk reduction in e-waste dismantling workshop using integrated techniques of electrostatic precipitation with advanced oxidation technologies

Energy Technology Data Exchange (ETDEWEB)

Chen, Jiangyao [State Key Laboratory of Organic Geochemistry and Guangdong Key Laboratory of Environmental Protection and Resources Utilization, Guangzhou Institute of Geochemistry, Chinese Academy of Sciences, Guangzhou 510640 (China); Huang, Yong [State Key Laboratory of Organic Geochemistry and Guangdong Key Laboratory of Environmental Protection and Resources Utilization, Guangzhou Institute of Geochemistry, Chinese Academy of Sciences, Guangzhou 510640 (China); University of Chinese Academy of Sciences, Beijing 100049 (China); Li, Guiying [State Key Laboratory of Organic Geochemistry and Guangdong Key Laboratory of Environmental Protection and Resources Utilization, Guangzhou Institute of Geochemistry, Chinese Academy of Sciences, Guangzhou 510640 (China); An, Taicheng, E-mail: antc99@gig.ac.cn [State Key Laboratory of Organic Geochemistry and Guangdong Key Laboratory of Environmental Protection and Resources Utilization, Guangzhou Institute of Geochemistry, Chinese Academy of Sciences, Guangzhou 510640 (China); Hu, Yunkun; Li, Yunlu [Guangzhou Longest Environmental Science and Technology Co., Ltd., Guangzhou 510660 (China)

2016-01-25

Highlights: • Pilot-scale investigation of VOCs removal during e-waste dismantling process. • EP-PC-ozonation integrated reactor show high and stable removal ability to VOCs. • Health risks of target VOCs decrease significantly after the treatment. - Abstract: Volatile organic compounds (VOCs) emitted during the electronic waste dismantling process (EWDP) were treated at a pilot scale, using integrated electrostatic precipitation (EP)-advanced oxidation technologies (AOTs, subsequent photocatalysis (PC) and ozonation). Although no obvious alteration was seen in VOC concentration and composition, EP technology removed 47.2% of total suspended particles, greatly reducing the negative effect of particles on subsequent AOTs. After the AOT treatment, average removal efficiencies of 95.7%, 95.4%, 87.4%, and 97.5% were achieved for aromatic hydrocarbons, aliphatic hydrocarbons, halogenated hydrocarbons, as well as nitrogen- and oxygen-containing compounds, respectively, over 60-day treatment period. Furthermore, high elimination capacities were also seen using hybrid technique of PC with ozonation; this was due to the PC unit’s high loading rates and excellent pre-treatment abilities, and the ozonation unit’s high elimination capacity. In addition, the non-cancer and cancer risks, as well as the occupational exposure cancer risk, for workers exposed to emitted VOCs in workshop were reduced dramatically after the integrated technique treatment. Results demonstrated that the integrated technique led to highly efficient and stable VOC removal from EWDP emissions at a pilot scale. This study points to an efficient approach for atmospheric purification and improving human health in e-waste recycling regions.

Review of the SLAC and Les Houches workshops

International Nuclear Information System (INIS)

Prescott, C.Y.

1994-12-01

Polarized Electron Source workshops have been held at varying intervals, beginning in 1983 when Charles Sinclair convened the first at SLAC. Since that time, three workshops were held in conjunction with the International Spin Symposia and two at other occasions. The increasing importance of polarized electron beams at accelerators has stimulated interest in these workshops. Two workshops have been held since the last International Spin Symposium in Nagoya. In 1993, a workshop was held at SLAC, and in 1994 at Les Houches, a polarized electron beam session was held as part of a polarized beam and targets workshop. This report summarizes highlights from the latter two workshops

WALLTURB International Workshop

CERN Document Server

Jimenez, Javier; Marusic, Ivan

2011-01-01

This book brings together selected contributions from the WALLTURB workshop on ”Understanding and modelling of wall turbulence” held in Lille, France, on April 21st to 23rd 2009. This workshop was organized by the WALLTURB consortium, in order to present to the relevant scientific community the main results of the project and to stimulate scientific discussions around the subject of wall turbulence. The workshop reviewed the recent progress in theoretical, experimental and numerical approaches to wall turbulence. The problems of zero pressure gradient, adverse pressure gradient and separating turbulent boundary layers were addressed in detail with the three approaches, using the most advanced tools. This book is a milestone in the research field, thanks to the high level of the invited speakers and the involvement of the contributors and a testimony of the achievement of the WALLTURB project.

Boiling water reactor simulator. Workshop material

International Nuclear Information System (INIS)

2003-01-01

The International Atomic Energy Agency (IAEA) has established an activity in nuclear reactor simulation computer programs to assist its Member States in education. The objective is to provide, for a variety of advanced reactor types, insight and practice in their operational characteristics and their response to perturbations and accident situations. To achieve this, the IAEA arranges for the development and distribution of simulation programs and workshop material and sponsors workshops. The workshops are in two parts: techniques and tools for reactor simulator development; and the use of reactor simulators in education. Workshop material for the first part is covered in the IAEA publication: Training Course Series No. 12, 'Reactor Simulator Development' (2001). Course material for workshops using a WWER- 1000 simulator from the Moscow Engineering and Physics Institute, Russian Federation is presented in the IAEA publication: Training Course Series No. 21 'WWER-1000 Reactor Simulator' (2002). Course material for workshops using a pressurized water reactor (PWR) simulator developed by Cassiopeia Technologies Incorporated, Canada, is presented in the IAEA publication: Training Course Series No. 22 'Pressurized Water Reactor Simulator' (2003). This report consists of course material for workshops using a boiling water reactor (BWR) simulator. Cassiopeia Technologies Incorporated, developed the simulator and prepared this report for the IAEA

Nuclear reactor spring strip grid spacer

International Nuclear Information System (INIS)

Patterson, J.F.; Flora, B.S.

1978-01-01

A bimetallic grid spacer is described comprising a grid structure of zircaloy formed by intersecting striplike members which define fuel element openings for receiving fuel elements and spring strips made of Inconel positioned within the grid structure for cooperating with the fuel elements to maintain them in their desired position. A plurality of these spring strips extend longitudinally between sides of the grid structure, being locked in position by the grid retaining strips. The fuel rods, which are disposed in the fuel openings formed in the grid structure, are positioned by means of the springs associated with the spring strips and a plurality of dimples which extend from the zircaloy grid structure into the openings. In one embodiment the strips are disposed in a plurality of arrays with those spring strip arrays situated in opposing diagonal quadrants of the grid structure extending in the same direction and adjacent spring strip arrays in each half of the spacer extending in relatively perpendicular directions. Other variations of the spring strip arrangements for a particular fuel design are disclosed herein

Warehouse Sanitation Workshop Handbook.

Science.gov (United States)

Food and Drug Administration (DHHS/PHS), Washington, DC.

This workshop handbook contains information and reference materials on proper food warehouse sanitation. The materials have been used at Food and Drug Administration (FDA) food warehouse sanitation workshops, and are selected by the FDA for use by food warehouse operators and for training warehouse sanitation employees. The handbook is divided…

Performance planning and measurement for DOE EM-International Technology Integration Program. A report on a performance measurement development workshop for DOE's environmental management international technology integration program

International Nuclear Information System (INIS)

Jordan, G.B.; Reed, J.H.; Wyler, L.D.

1997-03-01

This report describes the process and results from an effort to develop metrics for program accomplishments for the FY 1997 budget submission of the U.S. Department of Energy Environmental Management International Technology Integration Program (EM-ITI). The four-step process included interviews with key EM-ITI staff, the development of a strawman program logic chart, and all day facilitated workshop with EM-ITI staff during which preliminary performance plans and measures were developed and refined, and a series of follow-on discussions and activities including a cross-organizational project data base. The effort helped EM-ITI to crystallize and develop a unified vision of their future which they can effectively communicate to their own management and their internal and external customers. The effort sets the stage for responding to the Government Performance and Results Act. The metrics developed may be applicable to other international technology integration programs. Metrics were chosen in areas of eight general performance goals for 1997-1998: (1) number of forums provided for the exchange of information, (2) formal agreements signed, (3) new partners identified, (4) customers reached and satisfied, (5, 6) dollars leveraged by EM technology focus area and from foreign research, (7) number of foreign technologies identified for potential use in remediation of DOE sites, and (8) projects advanced through the pipeline

Preface: Workshop on Off-Grid Technology Systems

Science.gov (United States)

Alonso-Marroquin, Fernando

2017-06-01

Off-grid houses are dwellings that do not rely on water supply, sewer, or electrical power grid, and are able to operate independently of all public utility services. These houses are ideal for remote communities or population suffering natural or human-made disasters. Our aim is to develop compact and affordable off-grid technologies by integrating high-end nano-engineering with systems that imitates natural biological processes. The key areas of focus in the workshop were: solar energy harvesting using nanotechnology, wind energy harvesting from vertical-axis wind turbines, supercapacitors energy storage systems, treatment of greywater, and green roofs to achieve air comfort.

Proceedings of Chamonix 2012 workshop on LHC Performance

International Nuclear Information System (INIS)

Carli, C.

2012-01-01

During this workshop on LHC performance, operation of the machine in 2012, activities during the first long shutdown LS1 aiming at preparing for operation at 7 TeV per beam and substantial long term upgrades of both the injector chain and the LHC have been discussed. After a session dedicated to observations and lessons from the run 2011, strategies for the run 2012 have been discussed in order to optimize the machine performance and, in particular, the maximum and integrated luminosity provided to the main experiments. Two session were dedicated to the preparation of the first long shutdown (LS1) followed by a session aiming at optimizing the performance to be expected after this first shutdown. The last two session of the workshop were dedicated to substantial upgrades of the injector complex and the LHC aiming at increasing the integrated luminosity to 250 inverse femto-barn per year after implementation in a second long shutdown. Improvements of the injector complex comprise increased injection energies in the PS Booster and the PS, an upgrade of the SPS vacuum chamber to alleviate limitations due to electron cloud build up and many more upgrades required for the generation of beams with higher brightness and smaller emittances than possible with the present machines. Plans for the LHC comprise an upgrade of the interaction regions to allow for a smaller beta*, crab cavities for luminosity levelling and, upgrades of the collimation and other systems

Strength evaluation of top nozzle holddown spring screw for nuclear fuel assembly

International Nuclear Information System (INIS)

Koh, S. K.; Won, S. Y.; Ryu, C. H.; Kim, Y. J.; Lee, K. S.; Jeon, K. L.

2002-01-01

Holddown springs are required to maintain the nuclear fuel assembly in contact with lower core plate and permit thermal and irradiation-induced length changes. Therefore, the holddown spring screw must be designed such that it is capable of sustaining the loads imposed by the initial tensile preload and operational loads. Prior to assessing the structural integrity of the spring screw in the corrosive and irradiating environment throughout the design lifetime of the fuel assembly, the strength evaluation of screw was made in this paper using the mechanics of materials and finite element methods. Calculations based on the mechanics of materials, showed that the preloaded screw with an operating holddown force had a quite large margin of safety in strength. However, the elastic-plastic finite element analysis showed that the local stresses at the critical regions of head-shank fillet and thread root significantly exceeded than the yield strength of the screw material, resulting in local plastic deformation. Preloading on the screw applied for tightening had beneficial effects on the screw strength by reducing the stress level at the critical regions, compared to the screw without preload. Calculated spring deflection using the finite element analysis was in close agreement with the experimentally measured deflection

CIRDAP -- the British Council Regional Workshop. Towards Gender Equity: Poverty, Rights, and Participation.

Science.gov (United States)

1998-03-01

This article describes a February 1998, regional workshop entitled "Towards Gender Equity: Poverty, Rights, and Participation," which was organized by the Center on Integrated Rural Development for Asia and the Pacific (CIRDAP) and the British Council. Participants included about 60 high-level representatives of governments, nongovernmental organizations, academicians, and activists from CIRDAP, the UK, and Bangladesh. The aim was to identify ways to monitor the implementation of the Beijing Platform of Action (BPOA)in CIRDAP member countries and advocate continual compliance with the BPOA. The agenda included five issue-based working sessions, plenaries, group discussions, adoption of group resolutions, and closure. Participants visited urban schools run by the Bangladesh Rural Advancement Committee and the Gono Shahajjo Sangstha that provided education for low income, disadvantaged children. Press conferences were held pre-post workshop. Each participant at the workshop end identified at least one issue or recommendation that they would follow-up on after the workshop. Subthemes were access to income for women (access to and control of resources, microcredit, and small enterprises); rights (land rights, inheritance of property, and legal rights); political participation (good governance, community participation); economic reforms and sustainable development (structural adjustment, liberalization, and globalization), and BPOA. Under each subtheme are lists of issues or problems and recommendations.

2016 FACET-II Science Workshop Summary Report

Energy Technology Data Exchange (ETDEWEB)

Hogan, Mark J., ed.

2017-07-19

The second in a series of FACET-II Science Workshops was held at SLAC National Accelerator Laboratory on October 17-19, 2016 [1]. The workshop drew thirty-five participants from eighteen different institutions including CERN, DESY, Ecole Polytechnique, FNAL, JAI, LBNL, LLNL, Radiabeam, Radiasoft, SLAC, Stony Brook, Strathclyde, Tech-X, Tsinghua, UC Boulder, UCLA and UT Austin. The 2015 workshop [2, 3] helped prioritize research directions for FACET-II. The 2016 workshop was focused on understanding what improvements are needed at the facility to support the next generation of experiments. All presentations are linked to the workshop website as a permanent record.

Results from the Industrial Design Workshop at DEWI

International Nuclear Information System (INIS)

Soeker, H.

1994-01-01

As any other manufacturer of industrial goods wind energy companies have to face harsh conditions such as growing technical maturity of the wind energy market, shortened phases for product development and increasing competition. DEWI's Industrial Design Workshop, that took place in early March 1994, suggested the integration of the industrial design vision into the product development as a remedy. Presentations were given concerning the need for industrial design in wind energy technology as well as its self-image and potential. The discussion showed the still prevailing mutual non acceptance of competence on the part of industry executives as well as designers. In a second sequence five design projects and studies carried out by professional designers and industrial design students were presented. Again passionate discussions followed each presentation. As a resumee a clear approximation between the participating wind energy developers and industrial designers can be stated. A detailed documentation on the workshop in german language will soon be available. For more information call ++49-4421-48 08 25. (orig.)

75 FR 39241 - Hooper Springs Project

Science.gov (United States)

2010-07-08

... DEPARTMENT OF ENERGY Bonneville Power Administration Hooper Springs Project AGENCY: Bonneville... (collectively referred to as the Hooper Springs Project). The new BPA substation would be called Hooper Springs... proposed project would address voltage stability and reliability concerns of two of BPA's full requirements...

Iterative Prototyping of Strategy Implementation Workshop Design

DEFF Research Database (Denmark)

Kryger, Anders

2018-01-01

Purpose: The purpose of this paper is to demonstrate how a strategy implementation workshop design can be developed and tested while minimizing the time spent on developing the design. Design/methodology/approach: This multiple case study at a diesel engine company shows how iterative prototyping...... can be used to structure the design process of a strategy implementation workshop. Findings: Strategy implementation workshop design can be developed in resource-constrained environments through iterative prototyping of the workshop design. Each workshop iteration can generate value in its own right...... draw on his/her experience as well as add to his/her knowledge base. Originality/value: Introducing iterative prototyping in an organizational context can facilitate fast yet structured development of a rigorous workshop design. Strategy consultants are provided with empirical examples of how...

Li'l Red Schoolhouse workshops

Science.gov (United States)

1993-01-01

Education specialists at Stennis conduct staff development workshops for elementary and secondary teachers of math, science and technology and other subjects as well as specialized workshops conducted in the NASA Li'l Red Schoolhouse.

DESY: QCD workshop

International Nuclear Information System (INIS)

Ingelman, Gunnar

1994-01-01

The traditional annual DESY Theory Workshop highlights a topical theory sector. The most recent was under the motto 'Quantum Chromo-Dynamics' - QCD, the field theory of quarks and gluons. The organizers had arranged a programme covering most aspects of current QCD research. This time the workshop was followed by a topical meeting on 'QCD at HERA' to look at the electron-proton scattering experiments now in operation at DESY's new HERA collider

Physics and Astronomy New Faculty Workshops: 20 Years of Workshops and 2000 Faculty

Science.gov (United States)

Hilborn, Robert

Most college and university new faculty members start their teaching careers with almost no formal training in pedagogy. To address this issue, the American Association of Physics Teachers, the American Astronomical Society, and the American Physical Society have been offering since 1996 workshops for physics and astronomy new faculty members (and in recent years for experienced faculty members as well). The workshops introduce faculty members to a variety of interactive engagement teaching (IET) methods and the evidence for their effectiveness, embedded in a framework of general professional development. Currently the workshops engage about 50% of the new tenure-track hires in physics and astronomy. The workshops are quite successful in making the participants aware of IET methods and motivating them to implement them in their classes. However, about 1/3 of the participants stop using IET methods within a year or two. The faculty members cite (a) lack of time and energy to change, (b) content coverage concerns, and (c) difficulty getting students engaged as reasons for their discontinuance. To help overcome these barriers, we have introduced faculty online learning communities (FOLCs). The FOLCs provide peer support and advice through webinars and coaching from more experienced faculty members. Recommendations based on the workshops and the experiences of the participants can enhance the teaching effectiveness of future physics and astronomy faculty members. This work was supported in part by NSF Grant 1431638.

Proceedings of the Complex Systems Engineering Synthesis and Assessment Technology Workshop Held in Silver Spring, Maryland on 20-24 July 1992

Science.gov (United States)

1992-07-24

the Alpha Real-Time Distributed Kernel. In USENIX Workshop on MicroKernels and Other Kernel Architectures, Apr 1992. [6] M. R. Garey and D. S. Johnson...1 K51 (T WOOLFREY) 1 U33 (H ROTH) I3 (4) I I REPORT DOCUMENTATION PAGE O *spe of tN cofvnomontoiod ’ Ir E vkj rtt0"’ OPIII I)II 1f*I .f L4 I. lg

Establishing Ozone Critical Levels II. UNECE Workshop Report

Energy Technology Data Exchange (ETDEWEB)

Karlsson, Per Erik; Sellden, Gun; Pleijel, Haakan [eds.

2003-06-01

This document is the final report from the workshop. It contains the overall summary of the conclusions from the workshop, the reports from the three working groups that were active during the workshop as well as all background papers presented at the workshop.

75 FR 28051 - Public Workshop: Pieces of Privacy

Science.gov (United States)

2010-05-19

... DEPARTMENT OF HOMELAND SECURITY Office of the Secretary Public Workshop: Pieces of Privacy AGENCY: Privacy Office, DHS. ACTION: Notice announcing public workshop. SUMMARY: The Department of Homeland Security Privacy Office will host a public workshop, ``Pieces of Privacy.'' DATES: The workshop will be...

Workshop Engages PCs in Accelerator Controls

International Nuclear Information System (INIS)

Matthew Bickley

2006-01-01

To discuss the rapidly growing and changing use of personal computers (PCs) in accelerator control systems, 80 accelerator controls specialists from 26 institutions in North America, Europe and Asia attended the 6. International Workshop on Personal Computers and Particle Accelerator Controls, PCaPAC2006, held October 24-27 at Jefferson Lab in Newport News, Virginia. PCs have become increasingly applicable to the control of accelerators as their computing capacities have increased exponentially over the last 10 years. Capabilities that once required the power available only from expensive, small-market systems offered by DEC, Sun or IBM can now be obtained with commodity hardware offered by many vendors. The price/performance ratio presented by any standard PC makes a compelling case for using PC hardware in accelerator controls wherever possible. The PCaPAC meeting underscored the importance of collaborative control system development. Several talks focused on additions to three such systems, TINE, TANGO and EPICS. The diverse contributions to these toolkits, both in content and source, demonstrate the power of leveraged software development across a number of facilities. TINE originated in DESY's desire to give users a unified software bus above disparate underlying platforms. TINE discussions at PCaPAC centered on the toolkit's interface layers, including address redirection and integration with other control systems. TANGO has been a collaborative effort from its inception. Based on CORBA, this open-source controls toolkit is a registered project in the source forge system. The workshop TANGO presentation discussed contributions from four TANGO institutions, and mentioned a broad range of new tools, from user interface applications to code generators and database integration software. EPICS, which was started at LANL in the 1980s, includes contributions from dozens of institutions around the world. EPICS-related PCaPAC discussions included virtual machines at

Crop diversification, tillage, and management system influences on spring wheat yield and soil water use

Science.gov (United States)

Depleted soil quality, decreased water availability, and increased weed competition constrain spring wheat production in the northern Great Plains. Integrated crop management systems are necessary for improved crop productivity. We conducted a field experiment from 2004-2010 comparing productivity...

Proceedings of the 4. CSNI workshop on the chemistry of iodine in reactor safety

Energy Technology Data Exchange (ETDEWEB)

Guentay, S [ed.; Paul Scherrer Inst. (PSI), Villigen (Switzerland)

1996-12-01

The 4. OECD workshop on the chemistry of iodine in reactor safety was held in Wuerenlingen, Switzerland from June 10th to 12th, 1996. It was organised in collaboration with the Laboratory for Safety and Accident Research of the Paul Scherrer Institute. About seventy experts from fourteen OECD member countries attended the meeting, as well as experts from Latvia and the Commission of the European Communities. Thirty-four papers were presented in five sessions on various aspects of national and international programmes, integral and intermediate-scale experiments, experimental homogeneous phase chemistry, surface processes, thermodynamic and kinetic studies and safety applications. Throughout the meeting, emphasis was placed on detailed and open discussions. The purpose of the workshop was to exchange information on the iodine chemistry and other important fission products relevant to reactor safety, to discuss the status of the open issues identified during the previous workshop held in 1991, to define reactor safety issues and to discuss developments and future plans. (author) figs., tabs., refs.

Proceedings of the 4. CSNI workshop on the chemistry of iodine in reactor safety

International Nuclear Information System (INIS)

Guentay, S.

1996-12-01

The 4. OECD workshop on the chemistry of iodine in reactor safety was held in Wuerenlingen, Switzerland from June 10th to 12th, 1996. It was organised in collaboration with the Laboratory for Safety and Accident Research of the Paul Scherrer Institute. About seventy experts from fourteen OECD member countries attended the meeting, as well as experts from Latvia and the Commission of the European Communities. Thirty-four papers were presented in five sessions on various aspects of national and international programmes, integral and intermediate-scale experiments, experimental homogeneous phase chemistry, surface processes, thermodynamic and kinetic studies and safety applications. Throughout the meeting, emphasis was placed on detailed and open discussions. The purpose of the workshop was to exchange information on the iodine chemistry and other important fission products relevant to reactor safety, to discuss the status of the open issues identified during the previous workshop held in 1991, to define reactor safety issues and to discuss developments and future plans. (author) figs., tabs., refs

Measurement Control Workshop Instructional Materials

International Nuclear Information System (INIS)

Gibbs, Philip; Crawford, Cary; McGinnis, Brent

2014-01-01

A workshop to teach the essential elements of an effective nuclear materials control and accountability (MC&A) programs are outlined, along with the modes of Instruction, and the roles and responsibilities of participants in the workshop.

Measurement control workshop instructional materials

Energy Technology Data Exchange (ETDEWEB)

Gibbs, Philip [Brookhaven National Lab. (BNL), Upton, NY (United States); Crawford, Cary [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); McGinnis, Brent [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Insolves LLC, Piketon, OH (United States)

2014-04-01

A workshop to teach the essential elements of an effective nuclear materials control and accountability (MC&A) programs are outlined, along with the modes of Instruction, and the roles and responsibilities of participants in the workshop.

2nd International Workshop on Isogeometric Analysis and Applications

CERN Document Server

Simeon, Bernd

2015-01-01

Isogeometric Analysis is a groundbreaking computational approach that promises the possibility of integrating the finite element  method into conventional spline-based CAD design tools. It thus bridges the gap between numerical analysis and geometry, and moreover it allows to tackle new cutting edge applications at the frontiers of research in science and engineering. This proceedings volume contains a selection of outstanding research papers presented at the second International Workshop on Isogeometric Analysis and Applications, held at Annweiler, Germany, in April 2014.

IFPA meeting 2015 workshop report II: mechanistic role of the placenta in fetal programming; biomarkers of placental function and complications of pregnancy.

Science.gov (United States)

Andraweera, P H; Bobek, G; Bowen, C; Burton, G J; Correa Frigerio, P; Chaparro, A; Dickinson, H; Duncombe, G; Hyett, J; Illanes, S E; Johnstone, E; Kumar, S; Morgan, T K; Myers, J; Orefice, R; Roberts, C T; Salafia, C M; Thornburg, K L; Whitehead, C L; Bainbridge, S A

2016-12-01

Workshops are an integral component of the annual International Federation of Placenta Association (IFPA) meeting, allowing for networking and focused discussion related to specialized topics on the placenta. At the 2015 IFPA meeting (Brisbane, Australia) twelve themed workshops were held, three of which are summarized in this report. These workshops focused on various aspects of placental function, particularly in cases of placenta-mediated disease. Collectively, these inter-connected workshops highlighted the role of the placenta in fetal programming, the use of various biomarkers to monitor placental function across pregnancy, and the clinical impact of novel diagnostic and surveillance modalities in instances of late onset fetal growth restriction (FGR). Copyright © 2015 Elsevier Ltd. All rights reserved.

Geologic context of large karst springs and caves in the Ozark National Scenic Riverways, Missouri

Science.gov (United States)

Weary, David J.; Orndorff, Randall C.

2016-01-01

The ONSR is a karst park, containing many springs and caves. The “jewels” of the park are large springs, several of first magnitude, that contribute significantly to the flow and water quality of the Current River and its tributaries. Completion of 1:24,000-scale geologic mapping of the park and surrounding river basin, along with synthesis of published hydrologic data, allows us to examine the spatial relationships between the springs and the geologic framework to develop a conceptual model for genesis of these springs. Based on their similarity to mapped spring conduits, many of the caves in the ONSR are fossil conduit segments. Therefore, geologic control on the evolution of the springs also applies to speleogenesis in this part of the southern Missouri Ozarks.Large springs occur in the ONSR area because: (1) the Ozark aquifer, from which they rise, is chiefly dolomite affected by solution via various processes over a long time period, (2) Paleozoic hypogenic fluid migration through these rocks exploited and enhanced flow-paths, (3) a consistent and low regional dip of the rocks off of the Salem Plateau (less than 2° to the southeast) allows integration of flow into large groundwater basins with a few discreet outlets, (4) the springs are located where the rivers have cut down into structural highs, allowing access to water from stratigraphic units deeper in the aquifer thus allowing development of springsheds that have volumetrically larger storage than smaller springs higher in the section, and (5) quartz sandstone and bedded chert in the carbonate stratigraphic succession that are locally to regionally continuous, serve as aquitards that locally confine groundwater up dip of the springs creating artesian conditions. This subhorizontal partitioning of the Ozark aquifer allows contributing areas for different springs to overlap, as evidenced by dye traces that cross adjacent groundwater basin boundaries, and possibly contributes to alternate flow routes

Baseline risk assessment for the quarry residuals operable unit of the Weldon Spring Site, Weldon Spring, Missouri

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-02-01

The U.S. Department of Energy (DOE) is conducting cleanup activities at the Weldon Spring site, located in St. Charles County, Missouri, about 48 km (30 mi) west of St. Louis. Cleanup of the site consists of several integrated components. The quarry residuals operable unit (QROU), consisting of the Weldon Spring quarry and its surrounding area, is one of four operable units being evaluated. In accordance with requirements of the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA), as amended, DOE is conducting a remedial investigation/feasibility study (RI/FS) to determine the proper response to address various contaminated media that constitute the QROU. Specifically, the operable unit consists of the following areas and media: the residual material remaining at the Weldon Spring quarry after removal of the pond water and the bulk waste; groundwater underlying the quarry and surrounding area; and other media located in the surrounding vicinity of the quarry, including surface water and sediment at Femme Osage Slough, Little Femme Osage Creek, and Femme Osage Creek. An initial evaluation of conditions at the quarry area identified remaining data requirements needed to support the conceptual site exposure and hydrogeological models. These data requirements are discussed in the RI/FS work plan issued in January 1994. Soil contamination located at a property adjacent to the quarry, referred to as Vicinity Property 9 (VP9), was originally part of the scope of the QROU, as discussed in the work plan. However, a decision was subsequently made to remediate this vicinity property as part of cleanup activities for the chemical plant operable unit, as provided for in the Record of Decision (ROD). Remediation of VP9 was completed in early 1996. Hence, this baseline risk assessment (BRA) does not address VP9.

Baseline risk assessment for the quarry residuals operable unit of the Weldon Spring Site, Weldon Spring, Missouri

International Nuclear Information System (INIS)

1998-02-01

The U.S. Department of Energy (DOE) is conducting cleanup activities at the Weldon Spring site, located in St. Charles County, Missouri, about 48 km (30 mi) west of St. Louis. Cleanup of the site consists of several integrated components. The quarry residuals operable unit (QROU), consisting of the Weldon Spring quarry and its surrounding area, is one of four operable units being evaluated. In accordance with requirements of the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA), as amended, DOE is conducting a remedial investigation/feasibility study (RI/FS) to determine the proper response to address various contaminated media that constitute the QROU. Specifically, the operable unit consists of the following areas and media: the residual material remaining at the Weldon Spring quarry after removal of the pond water and the bulk waste; groundwater underlying the quarry and surrounding area; and other media located in the surrounding vicinity of the quarry, including surface water and sediment at Femme Osage Slough, Little Femme Osage Creek, and Femme Osage Creek. An initial evaluation of conditions at the quarry area identified remaining data requirements needed to support the conceptual site exposure and hydrogeological models. These data requirements are discussed in the RI/FS work plan issued in January 1994. Soil contamination located at a property adjacent to the quarry, referred to as Vicinity Property 9 (VP9), was originally part of the scope of the QROU, as discussed in the work plan. However, a decision was subsequently made to remediate this vicinity property as part of cleanup activities for the chemical plant operable unit, as provided for in the Record of Decision (ROD). Remediation of VP9 was completed in early 1996. Hence, this baseline risk assessment (BRA) does not address VP9

Indonesian students' participation in an interprofessional learning workshop.

Science.gov (United States)

Ernawati, Desak Ketut; Lee, Ya Ping; Hughes, Jeffery

2015-01-01

Interprofessional learning activities, such as workshops allow students to learn from, with and about each other. This study assessed the impact on Indonesian health students' attitudes towards interprofessional education (IPE) from participating in a workshop on medication safety. The students attended a two-day IPE workshop on medication safety. Thirty-five (48.6%) students completed pre-/post-workshop surveys using a modified Readiness for Interprofessional Learning Scale (RIPLS) survey. The post-workshop survey also had a series of open-ended questions. Students' responses to each RIPLS statement pre-/post-workshop were compared, whilst their responses to open-ended questions in post-workshop survey were thematically analysed. Students reported positive attitudinal changes on statements of shared learning and teamwork sub-scale (Wilcoxon p value importance of teamwork and communication skills. This study found that learning with other health students through an IPE workshop improved medical, nursing and pharmacy students' attitudes towards the importance of shared learning, teamwork and communication in healthcare service.

Spatial-Temporal Analysis on Spring Festival Travel Rush in China Based on Multisource Big Data

Directory of Open Access Journals (Sweden)

Jiwei Li

2016-11-01

Full Text Available Spring Festival travel rush is a phenomenon in China that population travel intensively surges in a short time around Chinese Spring Festival. This phenomenon, which is a special one in the urbanization process of China, brings a large traffic burden and various kinds of social problems, thereby causing widespread public concern. This study investigates the spatial-temporal characteristics of Spring Festival travel rush in 2015 through time series analysis and complex network analysis based on multisource big travel data derived from Baidu, Tencent, and Qihoo. The main results are as follows: First, big travel data of Baidu and Tencent obtained from location-based services might be more accurate and scientific than that of Qihoo. Second, two travel peaks appeared at five days before and six days after the Spring Festival, respectively, and the travel valley appeared on the Spring Festival. The Spring Festival travel network at the provincial scale did not have small-world and scale-free characteristics. Instead, the travel network showed a multicenter characteristic and a significant geographic clustering characteristic. Moreover, some travel path chains played a leading role in the network. Third, economic and social factors had more influence on the travel network than geographical location factors. The problem of Spring Festival travel rush will not be effectively improved in a short time because of the unbalanced urban-rural development and the unbalanced regional development. However, the development of the modern high-speed transport system and the modern information and communication technology can alleviate problems brought by Spring Festival travel rush. We suggest that a unified real-time traffic platform for Spring Festival travel rush should be established through the government's integration of mobile big data and the official authority data of the transportation department.

TPC workshop summary

International Nuclear Information System (INIS)

Nygren, D.R.

1984-01-01

The Time Projection Chamber (TPC) concept is now nearly ten years old and, as is evident in this workshop, is still evolving in many directions. From the liquid xenon TPC for double beta decay studies to the impressively large second generation TPC for the LEP experiment ALEPH, the surprising diversity of current applications is apparent. This workshop, the first to concentrate solely on the TPC has provided a most congenial and rewarding occasion for all TPC enthusiasts to share experience, results, and ideas

t4 Workshop Report*

Science.gov (United States)

Kleensang, Andre; Maertens, Alexandra; Rosenberg, Michael; Fitzpatrick, Suzanne; Lamb, Justin; Auerbach, Scott; Brennan, Richard; Crofton, Kevin M.; Gordon, Ben; Fornace, Albert J.; Gaido, Kevin; Gerhold, David; Haw, Robin; Henney, Adriano; Ma’ayan, Avi; McBride, Mary; Monti, Stefano; Ochs, Michael F.; Pandey, Akhilesh; Sharan, Roded; Stierum, Rob; Tugendreich, Stuart; Willett, Catherine; Wittwehr, Clemens; Xia, Jianguo; Patton, Geoffrey W.; Arvidson, Kirk; Bouhifd, Mounir; Hogberg, Helena T.; Luechtefeld, Thomas; Smirnova, Lena; Zhao, Liang; Adeleye, Yeyejide; Kanehisa, Minoru; Carmichael, Paul; Andersen, Melvin E.; Hartung, Thomas

2014-01-01

Summary Despite wide-spread consensus on the need to transform toxicology and risk assessment in order to keep pace with technological and computational changes that have revolutionized the life sciences, there remains much work to be done to achieve the vision of toxicology based on a mechanistic foundation. A workshop was organized to explore one key aspect of this transformation – the development of Pathways of Toxicity (PoT) as a key tool for hazard identification based on systems biology. Several issues were discussed in depth in the workshop: The first was the challenge of formally defining the concept of a PoT as distinct from, but complementary to, other toxicological pathway concepts such as mode of action (MoA). The workshop came up with a preliminary definition of PoT as “A molecular definition of cellular processes shown to mediate adverse outcomes of toxicants”. It is further recognized that normal physiological pathways exist that maintain homeostasis and these, sufficiently perturbed, can become PoT. Second, the workshop sought to define the adequate public and commercial resources for PoT information, including data, visualization, analyses, tools, and use-cases, as well as the kinds of efforts that will be necessary to enable the creation of such a resource. Third, the workshop explored ways in which systems biology approaches could inform pathway annotation, and which resources are needed and available that can provide relevant PoT information to the diverse user communities. PMID:24127042

Developing bulk exchange spring magnets

Science.gov (United States)

Mccall, Scott K.; Kuntz, Joshua D.

2017-06-27

A method of making a bulk exchange spring magnet by providing a magnetically soft material, providing a hard magnetic material, and producing a composite of said magnetically soft material and said hard magnetic material to make the bulk exchange spring magnet. The step of producing a composite of magnetically soft material and hard magnetic material is accomplished by electrophoretic deposition of the magnetically soft material and the hard magnetic material to make the bulk exchange spring magnet.

Workshop proceedings: "We are the Olifants" - Key stakeholder workshop for the Upper Olifants River study

CSIR Research Space (South Africa)

Funke, Nicola S

2013-03-31

Full Text Available Project Leader, Natural Resources and the Environment Council for Scientific and Industrial Research March 2013 Workshop Proceedings Page v EXECUTIVE SUMMARY The Upper Olifants Key Stakeholder Workshop took place at the CSIR Knowledge...

Proceedings of the Inheritance Workshop at ECOOP 2002

DEFF Research Database (Denmark)

2002-01-01

The Inheritance Workshop at ECOOP 2002, which took place on Tuesday, 11 June, was the first ECOOP workshop focusing on inheritance after the successful workshops in 1991 and 1992. The workshop was intended as a forum for designers and implementers of object-oriented languages, and for software de...

Sheltered Workshops and Transition: Old Bottles, New Wine?

Science.gov (United States)

Coombe, Edmund

This paper provides a historical overview of sheltered workshops and presents information about service innovations and mission expansion. The first workshop in the United States was the Perkins Institute, opened in 1837 for individuals with visual handicaps. This workshop was typical of "categorical" workshops that were established during this…

Integrating clinical communication with clinical reasoning and the broader medical curriculum.

Science.gov (United States)

Cary, Julie; Kurtz, Suzanne

2013-09-01

The objectives of this paper are to discuss the results of a workshop conducted at EACH 2012. Specifically, we will (1) examine the link between communication, clinical reasoning, and medical problem solving, (2) explore strategies for (a) integrating clinical reasoning, medical problem solving, and content from the broader curriculum into clinical communication teaching and (b) integrating communication into the broader curriculum, and (3) discuss benefits gained from such integration. Salient features from the workshop were recorded and will be presented here, as well as a case example to illustrate important connections between clinical communication and clinical reasoning. Potential links between clinical communication, clinical reasoning, and medical problem solving as well as strategies to integrate clinical communication teaching and the broader curricula in human and veterinary medicine are enumerated. Participants expressed enthusiasm and keen interest in integration of clinical communication teaching and clinical reasoning during this workshop, came to the idea of the interdependence of these skills easily, and embraced the rationale immediately. Valuing the importance of communication as clinical skill and embracing the interdependence between communication and thought processes related to clinical reasoning and medical problem solving will be beneficial in teaching programs. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

Overview of NREL Distribution Grid Integration Cost Projects

Energy Technology Data Exchange (ETDEWEB)

Horowitz, Kelsey A [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Ding, Fei [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Mather, Barry A [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Palmintier, Bryan S [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Denholm, Paul L [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2018-01-12

This presentation was given at the 2017 NREL Workshop 'Benchmarking Distribution Grid Integration Costs Under High Distributed PV Penetrations.' It provides a brief overview of recent and ongoing NREL work on distribution system grid integration costs, as well as challenges and needs from the community.

Ninth workshop on geothermal reservoir engineering: Proceedings

Energy Technology Data Exchange (ETDEWEB)

Ramey, H.J. Jr.; Kruger, P.; Miller, F.G.; Horne, R.N.; Brigham, W.E.; Gudmundsson, J.S. (Stanford Geothermal Program)

1983-12-15

The attendance at the Workshop was similar to last year's with 123 registered participants of which 22 represented 8 foreign countries. A record number of technical papers (about 60) were submitted for presentation at the Workshop. The Program Committee, therefore, decided to have several parallel sessions to accommodate most of the papers. This format proved unpopular and will not be repeated. Many of the participants felt that the Workshop lost some of its unique qualities by having parallel sessions. The Workshop has always been held near the middle of December during examination week at Stanford. This timing was reviewed in an open discussion at the Workshop. The Program Committee subsequently decided to move the Workshop to January. The Tenth Workshop will be held on January 22-24, 1985. The theme of the Workshop this year was ''field developments worldwide''. The Program Committee addressed this theme by encouraging participants to submit field development papers, and by inviting several international authorities to give presentations at the Workshop. Field developments in at least twelve countries were reported: China, El Salvador, France, Greece, Iceland, Italy, Japan, Kenya, Mexico, New Zealand, the Philippines, and the United States. There were 58 technical presentations at the Workshop, of which 4 were not made available for publication. Several authors submitted papers not presented at the Workshop. However, these are included in the 60 papers of these Proceedings. The introductory address was given by Ron Toms of the U.S. Department of Energy, and the banquet speaker was A1 Cooper of Chevron Resources Company. An important contribution was made to the Workshop by the chairmen of the technical sessions. Other than Stanford Geothermal Program faculty members, they included: Don White (Field Developments), Bill D'Olier (Hydrothermal Systems), Herman Dykstra (Well Testing), Karsten Pruess (Well Testing), John Counsil

The ATLAS Electromagnetic Calorimeter Calibration Workshop

CERN Multimedia

Hong Ma; Isabelle Wingerter

The ATLAS Electromagnetic Calorimeter Calibration Workshop took place at LAPP-Annecy from the 1st to the 3rd of October; 45 people attended the workshop. A detailed program was setup before the workshop. The agenda was organised around very focused presentations where questions were raised to allow arguments to be exchanged and answers to be proposed. The main topics were: Electronics calibration Handling of problematic channels Cluster level corrections for electrons and photons Absolute energy scale Streams for calibration samples Calibration constants processing Learning from commissioning Forty-five people attended the workshop. The workshop was on the whole lively and fruitful. Based on years of experience with test beam analysis and Monte Carlo simulation, and the recent operation of the detector in the commissioning, the methods to calibrate the electromagnetic calorimeter are well known. Some of the procedures are being exercised in the commisssioning, which have demonstrated the c...

Summary of the PSI workshop

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-03-01

The PSI workshop had been held at JAERI-Naka, from March 15th to 16th, 2002. This workshop is held twice a year as the skull practice session to report the recent progress on the plasma - surface interactions of the experimental reactors such as ITER, JT-60, LHD, etc. and the development of the plasma facing components. There were 34 participants from the university and 18 participants from JAERI and 26 papers were presented. This booklet was published for the purpose of saving a record of this workshop performed in oral lecture form. (author)

Vibro-spring particle size distribution analyser

International Nuclear Information System (INIS)

Patel, Ketan Shantilal

2002-01-01

This thesis describes the design and development of an automated pre-production particle size distribution analyser for particles in the 20 - 2000 μm size range. This work is follow up to the vibro-spring particle sizer reported by Shaeri. In its most basic form, the instrument comprises a horizontally held closed coil helical spring that is partly filled with the test powder and sinusoidally vibrated in the transverse direction. Particle size distribution data are obtained by stretching the spring to known lengths and measuring the mass of the powder discharged from the spring's coils. The size of the particles on the other hand is determined from the spring 'intercoil' distance. The instrument developed by Shaeri had limited use due to its inability to measure sample mass directly. For the device reported here, modifications are made to the original configurations to establish means of direct sample mass measurement. The feasibility of techniques for measuring the mass of powder retained within the spring are investigated in detail. Initially, the measurement of mass is executed in-situ from the vibration characteristics based on the spring's first harmonic resonant frequency. This method is often erratic and unreliable due to the particle-particle-spring wall interactions and the spring bending. An much more successful alternative is found from a more complicated arrangement in which the spring forms part of a stiff cantilever system pivoted along its main axis. Here, the sample mass is determined in the 'static mode' by monitoring the cantilever beam's deflection following the wanton termination of vibration. The system performance has been optimised through the variations of the mechanical design of the key components and the operating procedure as well as taking into account the effect of changes in the ambient temperature on the system's response. The thesis also describes the design and development of the ancillary mechanisms. These include the pneumatic

8th International Workshop on Simulation

CERN Document Server

Rasch, Dieter; Melas, Viatcheslav; Moder, Karl; Statistics and simulation

2018-01-01

This volume features original contributions and invited review articles on mathematical statistics, statistical simulation and experimental design. The selected peer-reviewed contributions originate from the 8th International Workshop on Simulation held in Vienna in 2015. The book is intended for mathematical statisticians, Ph.D. students and statisticians working in medicine, engineering, pharmacy, psychology, agriculture and other related fields. The International Workshops on Simulation are devoted to statistical techniques in stochastic simulation, data collection, design of scientific experiments and studies representing broad areas of interest. The first 6 workshops took place in St. Petersburg, Russia, in 1994 – 2009 and the 7th workshop was held in Rimini, Italy, in 2013.

Force delivery of Ni-Ti coil springs.

Science.gov (United States)

Manhartsberger, C; Seidenbusch, W

1996-01-01

Sentalloy springs (GAC, Central Islip, N.Y.) of the open and closed type were investigated with a special designed device. The closed coil springs were subjected to a tensile and the open coil springs to a compression test. After a first measurement, the springs were activated for a period of 4 weeks and then reinvestigated with the same procedure. It could be shown distinctly that, with the different coil springs, the force delivery given by the producer could be achieved only within certain limits. To remain in the martensitic plateau, changed activation ranges, and for the Sentalloy coil springs white and red of the open and closed type, also changed force deliveries had to be taken into account. There was a distinct decrease in force delivery between the first and second measurement. After considering the loading curves of all the Sentalloy coil springs and choosing the right activation range respective to the force delivery, it was found that the coil springs deliver a superior clinical behavior and open new treatment possibilities.

EDITORIAL: The 9th Workshop on Frontiers in Low Temperature Plasma Diagnostics The 9th Workshop on Frontiers in Low Temperature Plasma Diagnostics

Science.gov (United States)

SAME ADDRESS--> Nader Sadeghi,