Baden Fuller, A J
2014-01-01
Engineering Field Theory focuses on the applications of field theory in gravitation, electrostatics, magnetism, electric current flow, conductive heat transfer, fluid flow, and seepage.The manuscript first ponders on electric flux, electrical materials, and flux function. Discussions focus on field intensity at the surface of a conductor, force on a charged surface, atomic properties, doublet and uniform field, flux tube and flux line, line charge and line sink, field of a surface charge, field intensity, flux density, permittivity, and Coulomb's law. The text then takes a look at gravitation
Measure and integration theory
Burckel, Robert B
2001-01-01
This book gives a straightforward introduction to the field as it is nowadays required in many branches of analysis and especially in probability theory. The first three chapters (Measure Theory, Integration Theory, Product Measures) basically follow the clear and approved exposition given in the author's earlier book on ""Probability Theory and Measure Theory"". Special emphasis is laid on a complete discussion of the transformation of measures and integration with respect to the product measure, convergence theorems, parameter depending integrals, as well as the Radon-Nikodym theorem. The fi
Measurement theory for engineers
Gertsbakh, Ilya
2003-01-01
The emphasis of this textbook is on industrial applications of Statistical Measurement Theory. It deals with the principal issues of measurement theory, is concise and intelligibly written, and to a wide extent self-contained. Difficult theoretical issues are separated from the mainstream presentation. Each topic starts with an informal introduction followed by an example, the rigorous problem formulation, solution method, and a detailed numerical solution. Each chapter concludes with a set of exercises of increasing difficulty, mostly with solutions. The book is meant as a text for graduate students and a reference for researchers and industrial experts specializing in measurement and measurement data analysis for quality control, quality engineering and industrial process improvement using statistical methods. Knowledge of calculus and fundamental probability and statistics is required for the understanding of its contents.
Stark, Michael; Hennessy, Joseph F. (Technical Monitor)
2002-01-01
My assertion is that not only are product lines a relevant research topic, but that the tools used by empirical software engineering researchers can address observed practical problems. Our experience at NASA has been there are often externally proposed solutions available, but that we have had difficulties applying them in our particular context. We have also focused on return on investment issues when evaluating product lines, and while these are important, one can not attain objective data on success or failure until several applications from a product family have been deployed. The use of the Quality Improvement Paradigm (QIP) can address these issues: (1) Planning an adoption path from an organization's current state to a product line approach; (2) Constructing a development process to fit the organization's adoption path; (3) Evaluation of product line development processes as the project is being developed. The QIP consists of the following six steps: (1) Characterize the project and its environment; (2) Set quantifiable goals for successful project performance; (3) Choose the appropriate process models, supporting methods, and tools for the project; (4) Execute the process, analyze interim results, and provide real-time feedback for corrective action; (5) Analyze the results of completed projects and recommend improvements; and (6) Package the lessons learned as updated and refined process models. A figure shows the QIP in detail. The iterative nature of the QIP supports an incremental development approach to product lines, and the project learning and feedback provide the necessary early evaluations.
Runge, Keith; Muralidharan, Krishna
2016-01-01
This book presents cutting-edge concepts, paradigms, and research highlights in the field of computational materials science and engineering, and provides a fresh, up-to-date perspective on solving present and future materials challenges. The chapters are written by not only pioneers in the fields of computational materials chemistry and materials science, but also experts in multi-scale modeling and simulation as applied to materials engineering. Pedagogical introductions to the different topics and continuity between the chapters are provided to ensure the appeal to a broad audience and to address the applicability of integrated computational materials science and engineering for solving real-world problems.
Constructive algebraic integration theory
Spitters, B.A.W.
2006-01-01
For a long time people have been trying to develop probability theory starting from ‘finite’ events rather than collections of infinite events. In this way one can find natural replacements for measurable sets and integrable functions, but measurable functions seemed to be more difficult to find. We
Radio-frequency integrated-circuit engineering
Nguyen, Cam
2015-01-01
Radio-Frequency Integrated-Circuit Engineering addresses the theory, analysis and design of passive and active RFIC's using Si-based CMOS and Bi-CMOS technologies, and other non-silicon based technologies. The materials covered are self-contained and presented in such detail that allows readers with only undergraduate electrical engineering knowledge in EM, RF, and circuits to understand and design RFICs. Organized into sixteen chapters, blending analog and microwave engineering, Radio-Frequency Integrated-Circuit Engineering emphasizes the microwave engineering approach for RFICs. Provide
Integrated engineering increases flexibility
International Nuclear Information System (INIS)
Smith, Ray
1991-01-01
Integrated Engineering (IE) can be used to describe the best use of increasingly rare good engineering talent in an increasingly competive world. A number of organisations are now moving towards IE without any general agreement on a precise definition. The engineering division of British Nuclear Fuels (BNFL) is one such organisation. This feature covers the reasoning behind the decision, and our experience to date. BNFL engineering division is responsible primarily for the provision of major facilities on BNFL operational sites. This provision includes feasibility, front end and detailed design, procurement, installation and commissioning. Task force working has been used for some of the large projects. But the future workload is expected to comprise many more smaller projects. At the same time, equipment is becoming more complex and the need for mutual understanding and appreciation between disciplines is increasing. To meet this increasing need for flexibility, BNFL has decided to move to the matrix structure of project management and functional departments described in the article. (Author)
Interdisciplinary Integrated Engineering Development Course in HITACHI
Ojima, Masahiro
As an example of interdisciplinary education for engineers in private companies, IED (Integrated Engineering Development) course at HITACHI Ltd. is presented. To help 30 years old or so promising engineers create a new product based on a new technology, one year term course is designed for four types of engineers; mechanical, electric & electronic, information software, and digital systems. Each course has core basic technologies plus related supplementary subjects to promote an interdisciplinary integrated engineer. Not only lectures given by university professors but heavy duty home work is also given by senior engineers of HITACHI to make them apply basic theory to practical problems. Furthermore, self development planning, leadership development program and technology-marketing project are introduced to promote human skills and business sense needed for technology leaders in company.
Continual integral in perturbation theory
International Nuclear Information System (INIS)
Slavnov, A.A.
1975-01-01
It is shown that all results obtained by means of continual integration within the framework of perturbation theory are completely equivalent to those obtained by the usual diagram technique and are therfore just as rigorous. A rigorous justification is given for the rules for operating with continual integrals in perturbation theory. (author)
Reliability engineering theory and practice
Birolini, Alessandro
2014-01-01
This book shows how to build in, evaluate, and demonstrate reliability and availability of components, equipment, systems. It presents the state-of-theart of reliability engineering, both in theory and practice, and is based on the author's more than 30 years experience in this field, half in industry and half as Professor of Reliability Engineering at the ETH, Zurich. The structure of the book allows rapid access to practical results. This final edition extend and replace all previous editions. New are, in particular, a strategy to mitigate incomplete coverage, a comprehensive introduction to human reliability with design guidelines and new models, and a refinement of reliability allocation, design guidelines for maintainability, and concepts related to regenerative stochastic processes. The set of problems for homework has been extended. Methods & tools are given in a way that they can be tailored to cover different reliability requirement levels and be used for safety analysis. Because of the Appendice...
Integrated Optical Circuit Engineering
Sriram, S.
1985-04-01
Implementation of single-mode optical fiber systems depends largely on the availability of integrated optical components for such functions as switching, multiplexing, and modulation. The technology of integrated optics is maturing very rapidly, and its growth justifies the optimism that now exists in the optical community.
Line integral on engineering mathematics
Wiryanto, L. H.
2018-01-01
Definite integral is a basic material in studying mathematics. At the level of calculus, calculating of definite integral is based on fundamental theorem of calculus, related to anti-derivative, as the inverse operation of derivative. At the higher level such as engineering mathematics, the definite integral is used as one of the calculating tools of line integral. the purpose of this is to identify if there is a question related to line integral, we can use definite integral as one of the calculating experience. The conclusion of this research says that the teaching experience in introducing the relation between both integrals through the engineer way of thinking can motivate and improve students in understanding the material.
Integrating Multidisciplinary Engineering Knowledge
Wolff, Karin; Luckett, Kathy
2013-01-01
In order to design two distinct engineering qualification levels for an existing University of Technology programme, empirical evidence based on the current diploma is necessary to illuminate the nature of and the relationship between the "contextual" and "conceptual" elements underpinning a multidisciplinary engineering…
Dispersion engineering for integrated nanophotonics
Vanbésien, Olivier
2014-01-01
This book shows how dispersion engineering in two dimensional dielectric photonic crystals can provide new effects for the precise control of light propagation for integrated nanophotonics.Dispersion engineering in regular and graded photonic crystals to promote anomalous refraction effects is studied from the concepts to experimental demonstration via nanofabrication considerations. Self collimation, ultra and negative refraction, second harmonic generation, mirage and invisibility effects which lead to an unprecedented control of light propagation at the (sub-)wavelength scale for the
Understanding structural engineering from theory to practice
Chen, Wai-Fah
2011-01-01
In our world of seemingly unlimited computing, numerous analytical approaches to the estimation of stress, strain, and displacement, including analytical, numerical, physical, and analog techniques, have greatly advanced the practice of engineering. Combining theory and experimentation, computer simulation has emerged as a third path for engineering design and performance evaluation. As a result, structural engineers working in the practical world of engineering must apply, and ideally, thrive, on these idealizations of science-based theories. Analyzing the major achievements in the field, Und
Reliability engineering theory and practice
Birolini, Alessandro
2017-01-01
This book shows how to build in and assess reliability, availability, maintainability, and safety (RAMS) of components, equipment, and systems. It presents the state of the art of reliability (RAMS) engineering, in theory & practice, and is based on over 30 years author's experience in this field, half in industry and half as Professor of Reliability Engineering at the ETH, Zurich. The book structure allows rapid access to practical results. Methods & tools are given in a way that they can be tailored to cover different RAMS requirement levels. Thanks to Appendices A6 - A8 the book is mathematically self-contained, and can be used as a textbook or as a desktop reference with a large number of tables (60), figures (210), and examples / exercises^ 10,000 per year since 2013) were the motivation for this final edition, the 13th since 1985, including German editions. Extended and carefully reviewed to improve accuracy, it represents the continuous improvement effort to satisfy reader's needs and confidenc...
Special theory on chemical engineering
International Nuclear Information System (INIS)
1987-06-01
This book give a special description about chemical engineering. The contents of this book are special technique for isolation on introduction and separation by membrane, biochemistry engineering, process system engineering, energy engineering, environment engineering, a high molecular new material, election material and research on surface property of catalyst. It has appendixes on history of transition on Korean chemical engineering text contents and history of the activity of Korea chemical engineering institute.
Polymer reaction engineering, an integrated approach
Meyer, T.; Keurentjes, J.T.F.; Meyer, T.; Keurentjes, J.T.F.
2005-01-01
Summary This chapter contains sections titled: Polymer Materials A Short History of Polymer Reaction Engineering The Position of Polymer Reaction Engineering Toward Integrated Polymer Reaction Engineering The Disciplines in Polymer Reaction Engineering The Future: Product-inspired Polymer Reaction
Application of Chaos Theory to Engine Systems
Matsumoto, Kazuhiro; Diebner, Hans H.; Tsuda, Ichiro; Hosoi, Yukiharu
2008-01-01
We focus on the control issue for engine systems from the perspective of chaos theory, which is based on the fact that engine systems have a low-dimensional chaotic dynamics. Two approaches are discussed: controlling chaos and harnessing chaos, respectively. We apply Pyragas' chaos control method to an actual engine system. The experimental results show that the chaotic motion of an engine system may be stabilized to a periodic motion. Alternatively, harnessing chaos for engine systems is add...
Thermal integrity in mechanics and engineering
Shorr, Boris F
2015-01-01
The book is targeted at engineers, university lecturers, postgraduates, and final year undergraduate students involved in computational modelling and experimental and theoretical analysis of the high-temperature behavior of engineering structures. It will also be of interest to researchers developing the thermal strength theory as a branch of continuum mechanics. Thermal integrity is a multidisciplinary field combining the expertise of mechanical engineers, material scientists and applied mathematicians, each approaching the problem from their specific viewpoint. This monograph draws on the research of a broad scientific community including the author’s contribution. The scope of thermal strength analysis was considerably extended thanks to modern computers and the implementation of FEM codes. However, the author believes that some material models adopted in the advanced high-performance software, are not sufficiently justificated due to lack of easy-to-follow books on the theoretical and experimental aspec...
Integrability of conformal fishnet theory
Gromov, Nikolay; Kazakov, Vladimir; Korchemsky, Gregory; Negro, Stefano; Sizov, Grigory
2018-01-01
We study integrability of fishnet-type Feynman graphs arising in planar four-dimensional bi-scalar chiral theory recently proposed in arXiv:1512.06704 as a special double scaling limit of gamma-deformed N = 4 SYM theory. We show that the transfer matrix "building" the fishnet graphs emerges from the R-matrix of non-compact conformal SU(2 , 2) Heisenberg spin chain with spins belonging to principal series representations of the four-dimensional conformal group. We demonstrate explicitly a relationship between this integrable spin chain and the Quantum Spectral Curve (QSC) of N = 4 SYM. Using QSC and spin chain methods, we construct Baxter equation for Q-functions of the conformal spin chain needed for computation of the anomalous dimensions of operators of the type tr( ϕ 1 J ) where ϕ 1 is one of the two scalars of the theory. For J = 3 we derive from QSC a quantization condition that fixes the relevant solution of Baxter equation. The scaling dimensions of the operators only receive contributions from wheel-like graphs. We develop integrability techniques to compute the divergent part of these graphs and use it to present the weak coupling expansion of dimensions to very high orders. Then we apply our exact equations to calculate the anomalous dimensions with J = 3 to practically unlimited precision at any coupling. These equations also describe an infinite tower of local conformal operators all carrying the same charge J = 3. The method should be applicable for any J and, in principle, to any local operators of bi-scalar theory. We show that at strong coupling the scaling dimensions can be derived from semiclassical quantization of finite gap solutions describing an integrable system of noncompact SU(2 , 2) spins. This bears similarities with the classical strings arising in the strongly coupled limit of N = 4 SYM.
Systems engineering and integration as a foundation for mission engineering
Beam, David F.
2015-01-01
Approved for public release; distribution is unlimited This paper investigates the emerging term mission engineering through the framework of systems engineering and systems integration. Systems engineering concepts, processes, and methodologies are extrapolated for use in conjunction with a systems integration, life-cycle based framework to effect mission engineering. The specific systems engineering concepts of measures of effectiveness, performance and suitability are recommended as fou...
Theory and practice in engineering thermodynamics
International Nuclear Information System (INIS)
Polak, P.
1983-01-01
The book is a new approach to engineering thermodynamics for students of mechanical engineering at diploma and degree levels. There is an explanation of the basic principles of thermodynamics, followed by several chapters illustrating these principles as applied to piston engines, the gas turbine, steam power, and refrigerators and heat pumps. The book aims to introduce some key features of theory and current practice in a way that students will find interesting
Integrated optics theory and technology
Hunsperger, Robert G
1984-01-01
Our intent in producing this book was to provide a text that would be comprehensive enough for an introductory course in integrated optics, yet concise enough in its mathematical derivations to be easily readable by a practicing engineer who desires an overview of the field. The response to the first edition has indeed been gratifying; unusually strong demand has caused it to be sold out during the initial year of publication, thus providing us with an early opportunity to produce this updated and improved second edition. This development is fortunate, because integrated optics is a very rapidly progressing field, with significant new research being regularly reported. Hence, a new chapter (Chap. 17) has been added to review recent progress and to provide numerous additional references to the relevant technical literature. Also, thirty-five new problems for practice have been included to supplement those at the ends of chapters in the first edition. Chapters I through 16 are essentially unchanged, except for ...
Integrability of orbifold ABJM theories
Energy Technology Data Exchange (ETDEWEB)
Bai, Nan; Chen, Hui-Huang [Institute of High Energy Physics and Theoretical Physics Center for Science Facilities,Chinese Academy of Sciences,19B Yuquan Road, Beijing 100049 (China); Ding, Xiao-Chen [School of Mathematical Sciences, Capital Normal University,105 North Road of West 3rd Ring, Beijing 100048 (China); Li, De-Sheng [Institute of High Energy Physics and Theoretical Physics Center for Science Facilities,Chinese Academy of Sciences,19B Yuquan Road, Beijing 100049 (China); Wu, Jun-Bao [Institute of High Energy Physics and Theoretical Physics Center for Science Facilities,Chinese Academy of Sciences,19B Yuquan Road, Beijing 100049 (China); School of Physics, Beihang University,37 Xueyuan Road, Beijing 100191 (China); Center for High Energy Physics, Peking University,5 Yiheyuan Rd, Beijing 100871 (China); School of Physical Sciences, University of Chinese Academy of Sciences,19A Yuquan Road, Beijing 100049 (China)
2016-11-18
Integrable structure has played a very important role in the study of various non-perturbative aspects of planar Aharony-Bergman-Jafferis-Maldacena (ABJM) theories. In this paper, we showed that this remarkable structure survives after orbifold operation with discrete group Γ
Reliability engineering theory and practice
Birolini, Alessandro
2010-01-01
Presenting a solid overview of reliability engineering, this volume enables readers to build and evaluate the reliability of various components, equipment and systems. Current applications are presented, and the text itself is based on the author's 30 years of experience in the field.
Thermal integrity in mechanics and engineering
International Nuclear Information System (INIS)
Shorr, Boris F.
2015-01-01
The book is targeted at engineers, university lecturers, postgraduates, and final year undergraduate students involved in computational modelling and experimental and theoretical analysis of the high-temperature behavior of engineering structures. It will also be of interest to researchers developing the thermal strength theory as a branch of continuum mechanics. Thermal integrity is a multidisciplinary field combining the expertise of mechanical engineers, material scientists and applied mathematicians, each approaching the problem from their specific viewpoint. This monograph draws on the research of a broad scientific community including the author's contribution. The scope of thermal strength analysis was considerably extended thanks to modern computers and the implementation of FEM codes. However, the author believes that some material models adopted in the advanced high-performance software, are not sufficiently justificated due to lack of easy-to-follow books on the theoretical and experimental aspects of thermal integrity. The author endeavors to provide a thorough yet sufficiently simple presentation of the underlying concepts, making the book compelling to a wide audience.
Thermal integrity in mechanics and engineering
Energy Technology Data Exchange (ETDEWEB)
Shorr, Boris F. [Central Institute of Aviation Motors (CIAM), Moscow (Russian Federation)
2015-07-01
The book is targeted at engineers, university lecturers, postgraduates, and final year undergraduate students involved in computational modelling and experimental and theoretical analysis of the high-temperature behavior of engineering structures. It will also be of interest to researchers developing the thermal strength theory as a branch of continuum mechanics. Thermal integrity is a multidisciplinary field combining the expertise of mechanical engineers, material scientists and applied mathematicians, each approaching the problem from their specific viewpoint. This monograph draws on the research of a broad scientific community including the author's contribution. The scope of thermal strength analysis was considerably extended thanks to modern computers and the implementation of FEM codes. However, the author believes that some material models adopted in the advanced high-performance software, are not sufficiently justificated due to lack of easy-to-follow books on the theoretical and experimental aspects of thermal integrity. The author endeavors to provide a thorough yet sufficiently simple presentation of the underlying concepts, making the book compelling to a wide audience.
Decision-Based Design Integrating Consumer Preferences into Engineering Design
Chen, Wei; Wassenaar, Henk Jan
2013-01-01
Building upon the fundamental principles of decision theory, Decision-Based Design: Integrating Consumer Preferences into Engineering Design presents an analytical approach to enterprise-driven Decision-Based Design (DBD) as a rigorous framework for decision making in engineering design. Once the related fundamentals of decision theory, economic analysis, and econometrics modelling are established, the remaining chapters describe the entire process, the associated analytical techniques, and the design case studies for integrating consumer preference modeling into the enterprise-driven DBD framework. Methods for identifying key attributes, optimal design of human appraisal experiments, data collection, data analysis, and demand model estimation are presented and illustrated using engineering design case studies. The scope of the chapters also provides: •A rigorous framework of integrating the interests from both producer and consumers in engineering design, •Analytical techniques of consumer choice model...
An Integrated Architecture for Engineering Problem Solving
National Research Council Canada - National Science Library
Pisan, Yusuf
1998-01-01
.... This thesis describes the Integrated Problem Solving Architecture (IPSA) that combines qualitative, quantitative and diagrammatic reasoning skills to produce annotated solutions to engineering problems...
Model integration and a theory of models
Dolk, Daniel R.; Kottemann, Jeffrey E.
1993-01-01
Model integration extends the scope of model management to include the dimension of manipulation as well. This invariably leads to comparisons with database theory. Model integration is viewed from four perspectives: Organizational, definitional, procedural, and implementational. Strategic modeling is discussed as the organizational motivation for model integration. Schema and process integration are examined as the logical and manipulation counterparts of model integr...
Probability theory and mathematical statistics for engineers
Pugachev, V S
1984-01-01
Probability Theory and Mathematical Statistics for Engineers focuses on the concepts of probability theory and mathematical statistics for finite-dimensional random variables.The publication first underscores the probabilities of events, random variables, and numerical characteristics of random variables. Discussions focus on canonical expansions of random vectors, second-order moments of random vectors, generalization of the density concept, entropy of a distribution, direct evaluation of probabilities, and conditional probabilities. The text then examines projections of random vector
Integrating rehabilitation engineering technology with biologics.
Collinger, Jennifer L; Dicianno, Brad E; Weber, Douglas J; Cui, Xinyan Tracy; Wang, Wei; Brienza, David M; Boninger, Michael L
2011-06-01
Rehabilitation engineers apply engineering principles to improve function or to solve challenges faced by persons with disabilities. It is critical to integrate the knowledge of biologics into the process of rehabilitation engineering to advance the field and maximize potential benefits to patients. Some applications in particular demonstrate the value of a symbiotic relationship between biologics and rehabilitation engineering. In this review we illustrate how researchers working with neural interfaces and integrated prosthetics, assistive technology, and biologics data collection are currently integrating these 2 fields. We also discuss the potential for further integration of biologics and rehabilitation engineering to deliver the best technologies and treatments to patients. Engineers and clinicians must work together to develop technologies that meet clinical needs and are accessible to the intended patient population. Copyright © 2011 American Academy of Physical Medicine and Rehabilitation. Published by Elsevier Inc. All rights reserved.
A Comprehensive Theory of Integration.
Singer, Sara J; Kerrissey, Michaela; Friedberg, Mark; Phillips, Russell
2018-03-01
Efforts to transform health care delivery to improve care have increasingly focused on care integration. However, variation in how integration is defined has complicated efforts to design, synthesize, and compare studies of integration in health care. Evaluations of integration initiatives would be enhanced by describing them according to clear definitions of integration and specifying which empirical relationships they seek to test-whether among types of integration or between integration and outcomes of care. Drawing on previous work, we present a comprehensive theoretical model of relationships between types of integration and propose how to measure them.
Topological quantum theories and integrable models
International Nuclear Information System (INIS)
Keski-Vakkuri, E.; Niemi, A.J.; Semenoff, G.; Tirkkonen, O.
1991-01-01
The path-integral generalization of the Duistermaat-Heckman integration formula is investigated for integrable models. It is shown that for models with periodic classical trajectories the path integral reduces to a form similar to the finite-dimensional Duistermaat-Heckman integration formula. This provides a relation between exactness of the stationary-phase approximation and Morse theory. It is also argued that certain integrable models can be related to topological quantum theories. Finally, it is found that in general the stationary-phase approximation presumes that the initial and final configurations are in different polarizations. This is exemplified by the quantization of the SU(2) coadjoint orbit
Integrating Ethics into Engineering Education
DEFF Research Database (Denmark)
Zhou, Chunfang; Otrel-Cass, Kathrin; Børsen, Tom
2015-01-01
In this chapter, the authors aim to explore the necessity of teaching ethics as part of engineering education based on the gaps between learning “hard” knowledge and “soft” skills in the current educational system. They discuss why the nature of engineering practices makes it difficult to look...... products are not value neutral. With a focus on Problem-Based Learning (PBL), the authors examine why engineers need to incorporate ethical codes in their decision-making process and professional tasks. Finally, they discuss how to build creative learning environments that can support attaining...... the objectives of engineering education....
Integrated care: theory to practice.
Stokes, Jonathan; Checkland, Kath; Kristensen, Søren Rud
2016-10-01
'Integrated care' is pitched as the solution to current health system challenges. In the literature, what integrated care actually involves is complex and contested. Multi-disciplinary team case management is frequently the primary focus of integrated care when implemented internationally. We examine the practical application of integrated care in the NHS in England to exemplify the prevalence of the case management focus. We look at the evidence for effectiveness of multi-disciplinary team case management, for the focus on high-risk groups and for integrated care more generally. We suggest realistic expectations of what integration of care alone can achieve and additional research questions. © The Author(s) 2016.
Quantum measure and integration theory
International Nuclear Information System (INIS)
Gudder, Stan
2009-01-01
This article begins with a review of quantum measure spaces. Quantum forms and indefinite inner-product spaces are then discussed. The main part of the paper introduces a quantum integral and derives some of its properties. The quantum integral's form for simple functions is characterized and it is shown that the quantum integral generalizes the Lebesgue integral. A bounded, monotone convergence theorem for quantum integrals is obtained and it is shown that a Radon-Nikodym-type theorem does not hold for quantum measures. As an example, a quantum-Lebesgue integral on the real line is considered.
Telecommunications system reliability engineering theory and practice
Ayers, Mark L
2012-01-01
"Increasing system complexity require new, more sophisticated tools for system modeling and metric calculation. Bringing the field up to date, this book provides telecommunications engineers with practical tools for analyzing, calculating, and reporting availability, reliability, and maintainability metrics. It gives the background in system reliability theory and covers in-depth applications in fiber optic networks, microwave networks, satellite networks, power systems, and facilities management. Computer programming tools for simulating the approaches presented, using the Matlab software suite, are also provided"
Quiver gauge theories and integrable lattice models
International Nuclear Information System (INIS)
Yagi, Junya
2015-01-01
We discuss connections between certain classes of supersymmetric quiver gauge theories and integrable lattice models from the point of view of topological quantum field theories (TQFTs). The relevant classes include 4d N=1 theories known as brane box and brane tilling models, 3d N=2 and 2d N=(2,2) theories obtained from them by compactification, and 2d N=(0,2) theories closely related to these theories. We argue that their supersymmetric indices carry structures of TQFTs equipped with line operators, and as a consequence, are equal to the partition functions of lattice models. The integrability of these models follows from the existence of extra dimension in the TQFTs, which emerges after the theories are embedded in M-theory. The Yang-Baxter equation expresses the invariance of supersymmetric indices under Seiberg duality and its lower-dimensional analogs.
Toward an Integrative Theory of the Firm
DEFF Research Database (Denmark)
Li, Xin
understand the nature and behaviors of the firm, we need a comprehensive yet integrative theory. Toward this end, this paper proposes a relationship-based theory of the firm (R’BT) which claims that it is the relationships between the entrepreneur and other individuals or firms that determine the existence......This paper argues that the existing four major theories of the firm, i.e., the transaction cost theory, resource-based view, the entrepreneurial theory, and the stakeholder theory, are all insightful yet partial because each of them has a particular focus on the phenomenon of the firm. To better...
Integrating ergonomic knowledge into engineering design processes
DEFF Research Database (Denmark)
Hall-Andersen, Lene Bjerg
Integrating ergonomic knowledge into engineering design processes has been shown to contribute to healthy and effective designs of workplaces. However, it is also well-recognized that, in practice, ergonomists often have difficulties gaining access to and impacting engineering design processes...... employed in the same company, constituted a supporting factor for the possibilities to integrate ergonomic knowledge into the engineering design processes. However, the integration activities remained discrete and only happened in some of the design projects. A major barrier was related to the business...... to the ergonomic ambitions of the clients. The ergonomists’ ability to navigate, act strategically, and compromise on ergonomic inputs is also important in relation to having an impact in the engineering design processes. Familiarity with the engineering design terminology and the setup of design projects seems...
Integration of Sustainability in Engineering Education
DEFF Research Database (Denmark)
Guerra, Aida
2017-01-01
Purpose: Education for sustainable development (ESD) is one of the challenges engineering education currently faces. Engineering education needs to revise and change its curriculum to integrate ESD principles and knowledge. Problem based learning (PBL) has been one of the main learning pedagogies...... used to integrate sustainability in engineering education. However, there is a lack of understanding of the relation between ESD and PBL principles and the ways in which they can be integrated and practised in the engineering curricula. This paper aims to investigate the relation between PBL and ESD...... knowledge and the tacit presence of sustainability. Originality/value: The existence of a PBL curriculum at institutional level, such as at Aalborg University, enables investigation of how the PBL and ESD principles are practised, highlighting the limitations and potentials of integrating sustainability...
Solitonic Integrable Perturbations of Parafermionic Theories
Fernández-Pousa, C R; Hollowood, Timothy J; Miramontes, J L
1997-01-01
The quantum integrability of a class of massive perturbations of the parafermionic conformal field theories associated to compact Lie groups is established by showing that they have quantum conserved densities of scale dimension 2 and 3. These theories are integrable for any value of a continuous vector coupling constant, and they generalize the perturbation of the minimal parafermionic models by their first thermal operator. The classical equations-of-motion of these perturbed theories are the non-abelian affine Toda equations which admit (charged) soliton solutions whose semi-classical quantization is expected to permit the identification of the exact S-matrix of the theory.
Integrated engineering system for nuclear facilities building
International Nuclear Information System (INIS)
Tomura, H.; Miyamoto, A.; Futami, F.; Yasuda, S.; Ohtomo, T.
1995-01-01
In the construction of buildings for nuclear facilities in Japan, construction companies are generally in charge of the building engineering work, coordinating with plant engineering. An integrated system for buildings (PROMOTE: PROductive MOdeling system for Total nuclear Engineering) described here is a building engineering system including the entire life cycle of buildings for nuclear facilities. A Three-dimensional (3D) building model (PRO-model) is to be in the core of the system (PROMOTE). Data sharing in the PROMOTE is also done with plant engineering systems. By providing these basic technical foundations, PROMOTE is oriented toward offering rational, highquality engineering for the projects. The aim of the system is to provide a technical foundation in building engineering. This paper discusses the characteristics of buildings for nuclear facilities and the outline of the PROMOTE. (author)
A J matrix engine for density functional theory calculations
International Nuclear Information System (INIS)
White, C.A.; Head-Gordon, M.
1996-01-01
We introduce a new method for the formation of the J matrix (Coulomb interaction matrix) within a basis of Cartesian Gaussian functions, as needed in density functional theory and Hartree endash Fock calculations. By summing the density matrix into the underlying Gaussian integral formulas, we have developed a J matrix open-quote open-quote engine close-quote close-quote which forms the exact J matrix without explicitly forming the full set of two electron integral intermediates. Several precomputable quantities have been identified, substantially reducing the number of floating point operations and memory accesses needed in a J matrix calculation. Initial timings indicate a speedup of greater than four times for the (pp parallel pp) class of integrals with speedups increasing to over ten times for (ff parallel ff) integrals. copyright 1996 American Institute of Physics
How Should Ethical Theories Be Dealt with in Engineering Ethics?
Ohishi, Toshihiro
Contemporary engineering ethics scholars deal with contesting several ethical theories without criticizing them radically and try to use them to solve ethical problems. In this paper I first show that a conflict between ethical theories is not superficial, and pragmatic methods are adopted in engineering ethics. Second, I claim that the way to deal with contesting ethical theories in contemporary engineering ethics has an unacceptable side which does not accord with my argument that a conflict between ethical theories is not superficial and pragmatic methods are adopted in engineering ethics. Finally, I conclude that this inconsistency in contemporary engineering ethics should be corrected to make contemporary engineering ethics consistent.
Integrable structures in quantum field theory
International Nuclear Information System (INIS)
Negro, Stefano
2016-01-01
This review was born as notes for a lecture given at the Young Researchers Integrability School (YRIS) school on integrability in Durham, in the summer of 2015. It deals with a beautiful method, developed in the mid-nineties by Bazhanov, Lukyanov and Zamolodchikov and, as such, called BLZ. This method can be interpreted as a field theory version of the quantum inverse scattering, also known as the algebraic Bethe ansatz. Starting with the case of conformal field theories (CFTs) we show how to build the field theory analogues of commuting transfer T matrices and Baxter Q -operators of integrable lattice models. These objects contain the complete information of the integrable structure of the theory, viz. the integrals of motion, and can be used, as we will show, to derive the thermodynamic Bethe ansatz and nonlinear integral equations. This same method can be easily extended to the description of integrable structures of certain particular massive deformations of CFTs; these, in turn, can be described as quantum group reductions of the quantum sine-Gordon model and it is an easy step to include this last theory in the framework of BLZ approach. Finally we show an interesting and surprising connection of the BLZ structures with classical objects emerging from the study of classical integrable models via the inverse scattering transform method. This connection goes under the name of ODE/IM correspondence and we will present it for the specific case of quantum sine-Gordon model only. (topical review)
Integrated Systems Engineering Framework (ISEF)
Federal Laboratory Consortium — The ISEF is an integrated SE framework built to create and capture knowledge using a decision-centric method, high-quality data visualizations, intuitive navigation...
Integrable structure in discrete shell membrane theory.
Schief, W K
2014-05-08
We present natural discrete analogues of two integrable classes of shell membranes. By construction, these discrete shell membranes are in equilibrium with respect to suitably chosen internal stresses and external forces. The integrability of the underlying equilibrium equations is proved by relating the geometry of the discrete shell membranes to discrete O surface theory. We establish connections with generalized barycentric coordinates and nine-point centres and identify a discrete version of the classical Gauss equation of surface theory.
Kant's Theory of European Integration
DEFF Research Database (Denmark)
Harste, Gorm
Abstract:Immanuel Kant developed a rather wide range of concepts to describe the process of an "ever broader union" of European states. Kant's theory posed a dilemma with two aspects. On the one hand republican states were free, and on the other they were obliged to follow rules of a union...
Integral Methods in Science and Engineering
Constanda, Christian
2011-01-01
An enormous array of problems encountered by scientists and engineers are based on the design of mathematical models using many different types of ordinary differential, partial differential, integral, and integro-differential equations. Accordingly, the solutions of these equations are of great interest to practitioners and to science in general. Presenting a wealth of cutting-edge research by a diverse group of experts in the field, Integral Methods in Science and Engineering: Computational and Analytic Aspects gives a vivid picture of both the development of theoretical integral techniques
Reverse engineering of integrated circuits
Chisholm, Gregory H.; Eckmann, Steven T.; Lain, Christopher M.; Veroff, Robert L.
2003-01-01
Software and a method therein to analyze circuits. The software comprises several tools, each of which perform particular functions in the Reverse Engineering process. The analyst, through a standard interface, directs each tool to the portion of the task to which it is most well suited, rendering previously intractable problems solvable. The tools are generally used iteratively to produce a successively more abstract picture of a circuit, about which incomplete a priori knowledge exists.
Bridging the engineering gap: integrated systems thinking
Weintré, J. R.; Delfi, M.
2017-09-01
On visits to rural Indonesia it is apparent that the advances made possible by technical engineered solutions, are rarely at the same pace as the human captivation of technical development. This uneven pace has limited the application of labour-saving equipment and efficiency. It is suggested to be of primary importance to advance technical application skills among communities as part of the continuous advancement cycle in our human environment. A creative approach to inclusive technology and internal transfer of equipment knowledge in society, reduces barriers and could diminish structural or societal undesired situations. Earlier theoretical concepts provide us a lens for describing the practices of habitus, conceptualization of social capital and integrated systems thinking. The interrelationship and complexities in technical and social systems requires to be investigated. This paper aims to describe those, combined with technological applications in an empirical ethnographic approach. The study analyses the negotiations of community members with the available technology. It intends to foster a better understanding of the various cultural-economic values by exploring the systems thinking theory, with a focus on rice cultivation in Indonesia, Japan and Australia. This research suggests that cultural, economic and technical advances vary considerably and human expectations are strongly influenced by local culture.
Introduction to Measure Theory and Integration
Ambrosio, Luigi; Mennucci, Andrea
2011-01-01
This textbook collects the notes for an introductory course in measure theory and integration. The course was taught by the authors to undergraduate students of the Scuola Normale Superiore, in the years 2000-2011. The goal of the course was to present, in a quick but rigorous way, the modern point of view on measure theory and integration, putting Lebesgue's Euclidean space theory into a more general context and presenting the basic applications to Fourier series, calculus and real analysis. The text can also pave the way to more advanced courses in probability, stochastic processes or geomet
Supporting Theory Building in Integrated Services Research
Robinson, Mark; Atkinson, Mary; Downing, Dick
2008-01-01
This literature review was commissioned by the National Foundation for Educational Research (NFER) to draw together current and recent studies of integrated working, in order to build an overview of the theories and models of such working. The review is important for current work on evaluating the early impact of integrated children's services and…
Path integral quantization of parametrized field theory
International Nuclear Information System (INIS)
Varadarajan, Madhavan
2004-01-01
Free scalar field theory on a flat spacetime can be cast into a generally covariant form known as parametrized field theory in which the action is a functional of the scalar field as well as the embedding variables which describe arbitrary, in general curved, foliations of the flat spacetime. We construct the path integral quantization of parametrized field theory in order to analyze issues at the interface of quantum field theory and general covariance in a path integral context. We show that the measure in the Lorentzian path integral is nontrivial and is the analog of the Fradkin-Vilkovisky measure for quantum gravity. We construct Euclidean functional integrals in the generally covariant setting of parametrized field theory using key ideas of Schleich and show that our constructions imply the existence of nonstandard 'Wick rotations' of the standard free scalar field two-point function. We develop a framework to study the problem of time through computations of scalar field two-point functions. We illustrate our ideas through explicit computation for a time independent (1+1)-dimensional foliation. Although the problem of time seems to be absent in this simple example, the general case is still open. We discuss our results in the contexts of the path integral formulation of quantum gravity and the canonical quantization of parametrized field theory
Reliability engineering. Theory and practice. 6. ed.
Energy Technology Data Exchange (ETDEWEB)
Birolini, Alessandro
2010-07-01
This book shows how to build in, evaluate, and demonstrate reliability and availability of components, equipment, systems. It presents the state-of-the-art of reliability engineering, both in theory and practice, and is based on the author's 30 years experience in this field, half in industry and half as Professor of Reliability Engineering at the ETH, Zurich. The structure of the book allows rapid access to practical results. Besides extensions to cost models and approximate expressions, new in this edition are investigations on common cause failures, phased-mission systems, availability demonstration and estimation, confidence limits at system level, trend tests for early failures or wearout, as well as a review of maintenance strategies, an introduction to Petri nets and dynamic FTA, and a set of problems for home-work. Methods and tools are given in a way that they can be tailored to cover different reliability requirement levels and be used for safety analysis as well. This book is a textbook establishing a link between theory and practice, with a large number of tables, figures, and examples to support the practical aspects. (orig.)
Integrated Engineering Information Technology, FY93 accommplishments
Energy Technology Data Exchange (ETDEWEB)
Harris, R.N.; Miller, D.K.; Neugebauer, G.L.; Orona, J.R.; Partridge, R.A.; Herman, J.D.
1994-03-01
The Integrated Engineering Information Technology (IEIT) project is providing a comprehensive, easy-to-use computer network solution or communicating with coworkers both inside and outside Sandia National Laboratories. IEIT capabilities include computer networking, electronic mail, mechanical design, and data management. These network-based tools have one fundamental purpose: to help create a concurrent engineering environment that will enable Sandia organizations to excel in today`s increasingly competitive business environment.
Integration of basic electromagnetism and engineering technology
DEFF Research Database (Denmark)
Bentz, Sigurd
1995-01-01
The theory of electromagnetism is taught as a part of most contemporary electrical engineering curricula. Usually a basic course is intended to cover all the fundamental electromagnetic theory which is needed in later engineering courses. However it is often found that students fail to understand...... theoretical course contents have been reduced to a core of fundamental principles. These are combined with the study of magnetic properties of materials closely related to manufacturer's data sheets. To enhance the understanding of these fundamentals, practical topics from engineering technology are included...... and their application in technology students get a more comprehensive understanding of electromagnetism, and they are able to apply the physical principles to problems they encounter later in their careers...
Integrated water resources management using engineering measures
Huang, Y.
2015-04-01
The management process of Integrated Water Resources Management (IWRM) consists of aspects of policies/strategies, measures (engineering measures and non-engineering measures) and organizational management structures, etc., among which engineering measures such as reservoirs, dikes, canals, etc., play the backbone that enables IWRM through redistribution and reallocation of water in time and space. Engineering measures are usually adopted for different objectives of water utilization and water disaster prevention, such as flood control and drought relief. The paper discusses the planning and implementation of engineering measures in IWRM of the Changjiang River, China. Planning and implementation practices of engineering measures for flood control and water utilization, etc., are presented. Operation practices of the Three Gorges Reservoir, particularly the development and application of regulation rules for flood management, power generation, water supply, ecosystem needs and sediment issues (e.g. erosion and siltation), are also presented. The experience obtained in the implementation of engineering measures in Changjiang River show that engineering measures are vital for IWRM. However, efforts should be made to deal with changes of the river system affected by the operation of engineering measures, in addition to escalatory development of new demands associated with socio-economic development.
Integrated water resources management using engineering measures
Directory of Open Access Journals (Sweden)
Y. Huang
2015-04-01
Full Text Available The management process of Integrated Water Resources Management (IWRM consists of aspects of policies/strategies, measures (engineering measures and non-engineering measures and organizational management structures, etc., among which engineering measures such as reservoirs, dikes, canals, etc., play the backbone that enables IWRM through redistribution and reallocation of water in time and space. Engineering measures are usually adopted for different objectives of water utilization and water disaster prevention, such as flood control and drought relief. The paper discusses the planning and implementation of engineering measures in IWRM of the Changjiang River, China. Planning and implementation practices of engineering measures for flood control and water utilization, etc., are presented. Operation practices of the Three Gorges Reservoir, particularly the development and application of regulation rules for flood management, power generation, water supply, ecosystem needs and sediment issues (e.g. erosion and siltation, are also presented. The experience obtained in the implementation of engineering measures in Changjiang River show that engineering measures are vital for IWRM. However, efforts should be made to deal with changes of the river system affected by the operation of engineering measures, in addition to escalatory development of new demands associated with socio-economic development.
Numerical methods for engine-airframe integration
International Nuclear Information System (INIS)
Murthy, S.N.B.; Paynter, G.C.
1986-01-01
Various papers on numerical methods for engine-airframe integration are presented. The individual topics considered include: scientific computing environment for the 1980s, overview of prediction of complex turbulent flows, numerical solutions of the compressible Navier-Stokes equations, elements of computational engine/airframe integrations, computational requirements for efficient engine installation, application of CAE and CFD techniques to complete tactical missile design, CFD applications to engine/airframe integration, and application of a second-generation low-order panel methods to powerplant installation studies. Also addressed are: three-dimensional flow analysis of turboprop inlet and nacelle configurations, application of computational methods to the design of large turbofan engine nacelles, comparison of full potential and Euler solution algorithms for aeropropulsive flow field computations, subsonic/transonic, supersonic nozzle flows and nozzle integration, subsonic/transonic prediction capabilities for nozzle/afterbody configurations, three-dimensional viscous design methodology of supersonic inlet systems for advanced technology aircraft, and a user's technology assessment
Gauge and integrable theories in loop spaces
International Nuclear Information System (INIS)
Ferreira, L.A.; Luchini, G.
2012-01-01
We propose an integral formulation of the equations of motion of a large class of field theories which leads in a quite natural and direct way to the construction of conservation laws. The approach is based on generalized non-abelian Stokes theorems for p-form connections, and its appropriate mathematical language is that of loop spaces. The equations of motion are written as the equality of a hyper-volume ordered integral to a hyper-surface ordered integral on the border of that hyper-volume. The approach applies to integrable field theories in (1+1) dimensions, Chern-Simons theories in (2+1) dimensions, and non-abelian gauge theories in (2+1) and (3+1) dimensions. The results presented in this paper are relevant for the understanding of global properties of those theories. As a special byproduct we solve a long standing problem in (3+1)-dimensional Yang-Mills theory, namely the construction of conserved charges, valid for any solution, which are invariant under arbitrary gauge transformations.
An Integrated Theory of Everything (TOE)
Colella, Antonio
2014-03-01
An Integrated TOE unifies all known physical phenomena from the Planck cube to the Super Universe (multiverse). Each matter/force particle is represented by a Planck cube string. Any Super Universe object is a volume of contiguous Planck cubes. Super force Planck cube string singularities existed at the start of all universes. An Integrated TOE foundations are twenty independent existing theories and without sacrificing their integrities, are replaced by twenty interrelated amplified theories. Amplifications of Higgs force theory are key to an Integrated TOE and include: 64 supersymmetric Higgs particles; super force condensations to 17 matter particles/associated Higgs forces; spontaneous symmetry breaking is bidirectional; and the sum of 8 permanent Higgs force energies is dark energy. Stellar black hole theory was amplified to include a quark star (matter) with mass, volume, near zero temperature, and maximum entropy. A black hole (energy) has energy, minimal volume (singularity), near infinite temperature, and minimum entropy. Our precursor universe's super supermassive quark star (matter) evaporated to a super supermassive black hole (energy). This transferred total conserved energy/mass and transformed entropy from maximum to minimum. Integrated Theory of Everything Book Video: https://www.youtube.com/watch?v=4a1c9IvdoGY Research Article Video: http://www.youtube.com/watch?v=CD-QoLeVbSY Research Article: http://toncolella.files.wordpress.com/2012/07/m080112.pdf.
Integrative production technology theory and applications
Özdemir, Denis
2017-01-01
This contributed volume contains the research results of the Cluster of Excellence “Integrative Production Technology for High-Wage Countries”, funded by the German Research Society (DFG). The approach to the topic is genuinely interdisciplinary, covering insights from fields such as engineering, material sciences, economics and social sciences. The book contains coherent deterministic models for integrative product creation chains as well as harmonized cybernetic models of production systems. The content is structured into five sections: Integrative Production Technology, Individualized Production, Virtual Production Systems, Integrated Technologies, Self-Optimizing Production Systems and Collaboration Productivity.The target audience primarily comprises research experts and practitioners in the field of production engineering, but the book may also be beneficial for graduate students. .
Path integral for relativistic particle theory
International Nuclear Information System (INIS)
Fradkin, E.S.; Gitman, D.M.; Shvartsman, Sh.M.
1990-06-01
An action for a relativistic spinning particle interacting with external electromagnetic field is considered in reparametrization and local supergauge invariant form. It is shown that various path integral representations derived for the causal Green function correspond to the different forms of the relativistic particle action. The analogy of the path integral derived with the Lagrangian path integral of the field theory is discussed. It is shown that to obtain the causal propagator, the integration over the null mode of the Lagrangian multiplier corresponding to the reparametrization invariance, has to be performed in the (0,+infinity) limits. (author). 23 refs
Integrated diesel engine NOx reduction technology development
Energy Technology Data Exchange (ETDEWEB)
Hoelzer, J.; Zhu, J.; Savonen, C.L. [Detroit Diesel Corp., MI (United States); Kharas, K.C.C.; Bailey, O.H.; Miller, M.; Vuichard, J. [Allied Signal Environmental Catalysts, Tulsa, OK (United States)
1997-12-31
The effectiveness of catalyst performance is a function of the inlet exhaust gas temperature, gas flow rate, concentration of NO{sub x} and oxygen, and reductant quantity and species. Given this interrelationship, it becomes immediately clear that an integrated development approach is necessary. Such an approach is taken in this project. As such, the system development path is directed by an engine-catalyst engineering team. Of the tools at the engine engineer`s disposal the real-time aspects of computer assisted subsystem modeling is valuable. It will continue to be the case as ever more subtle improvements are needed to meet competitive performance, durability, and emission challenges. A review of recent prototype engines has shown that considerable improvements to base diesel engine technology are being made. For example, HSDI NO{sub x} has been reduced by a factor of two within the past ten years. However, additional substantial NO{sub x}/PM reduction is still required for the future. A viable lean NO{sub x} catalyst would be an attractive solution to this end. The results of recent high and low temperature catalyst developments were presented. High temperature base metal catalysts have been formulated to produce very good conversion efficiency and good thermal stability, albeit at temperatures near the upper range of diesel engine operation. Low temperature noble metal catalysts have been developed to provide performance of promising 4-way control but need increased NO{sub x} reduction efficiency.
A Behavioral Theory of Human Capital Integration
DEFF Research Database (Denmark)
Christensen, Jesper
design in fostering the integration and use of human capital is bounded by individual cognitive limitations that may lead employees to deviate from expected behavior, both individually and in collaboration. The thesis consists of three research papers relying on comprehensive longitudinal project data...... with one another. The overarching contribution of the thesis is to demonstrate, through the combination of psychological and organizational theory, how the ability of firms to properly activate and apply the knowledge held by their employees is fundamentally contingent on the interplay of cognitive...... of a behavioral theory of human capital integration....
Field theory a path integral approach
Das, Ashok
2006-01-01
This unique book describes quantum field theory completely within the context of path integrals. With its utility in a variety of fields in physics, the subject matter is primarily developed within the context of quantum mechanics before going into specialized areas.Adding new material keenly requested by readers, this second edition is an important expansion of the popular first edition. Two extra chapters cover path integral quantization of gauge theories and anomalies, and a new section extends the supersymmetry chapter, where singular potentials in supersymmetric systems are described.
DATYS integrates piping and supports engineering
International Nuclear Information System (INIS)
Rendon, J.G.; Fraile, A.R.
1990-01-01
Empresarios Agrupados of Spain has developed an interactive software package which computerizes and integrates the whole range of tasks involved in pipework engineering; including drawing, design, analysis and support calculations. Its strength lies in its modularity and in the ability to re-evaluate and modify existing projects. (author)
Integrating interface slicing into software engineering processes
Beck, Jon
1993-01-01
Interface slicing is a tool which was developed to facilitate software engineering. As previously presented, it was described in terms of its techniques and mechanisms. The integration of interface slicing into specific software engineering activities is considered by discussing a number of potential applications of interface slicing. The applications discussed specifically address the problems, issues, or concerns raised in a previous project. Because a complete interface slicer is still under development, these applications must be phrased in future tenses. Nonetheless, the interface slicing techniques which were presented can be implemented using current compiler and static analysis technology. Whether implemented as a standalone tool or as a module in an integrated development or reverse engineering environment, they require analysis no more complex than that required for current system development environments. By contrast, conventional slicing is a methodology which, while showing much promise and intuitive appeal, has yet to be fully implemented in a production language environment despite 12 years of development.
Minimal string theories and integrable hierarchies
Iyer, Ramakrishnan
Well-defined, non-perturbative formulations of the physics of string theories in specific minimal or superminimal model backgrounds can be obtained by solving matrix models in the double scaling limit. They provide us with the first examples of completely solvable string theories. Despite being relatively simple compared to higher dimensional critical string theories, they furnish non-perturbative descriptions of interesting physical phenomena such as geometrical transitions between D-branes and fluxes, tachyon condensation and holography. The physics of these theories in the minimal model backgrounds is succinctly encoded in a non-linear differential equation known as the string equation, along with an associated hierarchy of integrable partial differential equations (PDEs). The bosonic string in (2,2m-1) conformal minimal model backgrounds and the type 0A string in (2,4 m) superconformal minimal model backgrounds have the Korteweg-de Vries system, while type 0B in (2,4m) backgrounds has the Zakharov-Shabat system. The integrable PDE hierarchy governs flows between backgrounds with different m. In this thesis, we explore this interesting connection between minimal string theories and integrable hierarchies further. We uncover the remarkable role that an infinite hierarchy of non-linear differential equations plays in organizing and connecting certain minimal string theories non-perturbatively. We are able to embed the type 0A and 0B (A,A) minimal string theories into this single framework. The string theories arise as special limits of a rich system of equations underpinned by an integrable system known as the dispersive water wave hierarchy. We find that there are several other string-like limits of the system, and conjecture that some of them are type IIA and IIB (A,D) minimal string backgrounds. We explain how these and several other string-like special points arise and are connected. In some cases, the framework endows the theories with a non
Philosophy of integrity assessment of engineering components
International Nuclear Information System (INIS)
Chaudhuri, Satyabrata
2008-01-01
Integrity assessment of engineering components in power plants and process industries has attracted global attention from the viewpoint of safety and economy for their optimum utilization. This paper describes some aspects of philosophy of component integrity such as life assessment technology, materials used and the factors limiting the serviceability of the components operating at high temperatures and pressures. Numerous investigations have been carried out all over the world to study changes in microstructure and material property due to prolonged service of the components to decide their further serviceability. This paper includes case studies on integrity assessment of service-exposed components carried out in our laboratory as well
Homological Perturbation Theory for Nonperturbative Integrals
Johnson-Freyd, Theo
2015-11-01
We use the homological perturbation lemma to produce explicit formulas computing the class in the twisted de Rham complex represented by an arbitrary polynomial. This is a non-asymptotic version of the method of Feynman diagrams. In particular, we explain that phenomena usually thought of as particular to asymptotic integrals in fact also occur exactly: integrals of the type appearing in quantum field theory can be reduced in a totally algebraic fashion to integrals over an Euler-Lagrange locus, provided this locus is understood in the scheme-theoretic sense, so that imaginary critical points and multiplicities of degenerate critical points contribute.
Teaching Civic Journalism: Integrating Theory and Practice.
McDevitt, Michael
2000-01-01
Describes a journalism course that used an integrative approach to teaching about the principles, practice, and effects of civic journalism, combining theory, news writing, and evaluation. Describes the class project on the controversial issue of panhandling. Discusses goals of civic journalism and of the project, journalistic methods used,…
An Integrative Theory of Numerical Development
Siegler, Robert; Lortie-Forgues, Hugues
2014-01-01
Understanding of numerical development is growing rapidly, but the volume and diversity of findings can make it difficult to perceive any coherence in the process. The integrative theory of numerical development posits that a coherent theme is present, however--progressive broadening of the set of numbers whose magnitudes can be accurately…
Supply Chain Systems Architecture and Engineering Design: Green-field Supply Chain Integration
Radanliev, P
2015-01-01
This paper developed a new theory for supply chain architecture, and engineering design that enables integration of the business and supply chain strategies. The architecture starts with individual supply chain participants and derives insights into the complex and abstract concept of green-field integration design. The paper presented a conceptual system for depicting the interactions between business and supply chain strategy engineering. The system examines the decisions made when engineer...
Integrability in N=2 superconformal gauge theorie
Energy Technology Data Exchange (ETDEWEB)
Pomoni, Elli [Deutsches Elektronen-Synchrotron DESY, Hamburg (Germany). Theory Group; National Technical Univ. of Athens (Greece). Physics Div.
2013-10-15
Any N=2 superconformal gauge theory (including N=4 SYM) contains a set of local operators made only out of fields in the N=2 vector multiplet that is closed under renormalization to all loops, namely the SU(2,1 vertical stroke 2) sector. For planar N=4 SYM the spectrum of local operators can be obtained by mapping the problem to an integrable model (a spin chain in perturbation theory), in principle for any value of the coupling constant. We present a diagrammatic argument that for any planar N=2 superconformal gauge theory the SU(2,1 vertical stroke 2) Hamiltonian acting on infinite spin chains is identical to all loops to that of N=4 SYM, up to a redefinition of the coupling constant. Thus, this sector is integrable and anomalous dimensions can be, in principle, read off from the N=4 ones up to this redefinition.
Integrability in N=2 superconformal gauge theories
International Nuclear Information System (INIS)
Pomoni, Elli; National Technical Univ. of Athens
2013-10-01
Any N=2 superconformal gauge theory (including N=4 SYM) contains a set of local operators made only out of fields in the N=2 vector multiplet that is closed under renormalization to all loops, namely the SU(2,1 vertical stroke 2) sector. For planar N=4 SYM the spectrum of local operators can be obtained by mapping the problem to an integrable model (a spin chain in perturbation theory), in principle for any value of the coupling constant. We present a diagrammatic argument that for any planar N=2 superconformal gauge theory the SU(2,1 vertical stroke 2) Hamiltonian acting on infinite spin chains is identical to all loops to that of N=4 SYM, up to a redefinition of the coupling constant. Thus, this sector is integrable and anomalous dimensions can be, in principle, read off from the N=4 ones up to this redefinition.
Theory of Technical Systems--Educational Tool for Engineering
Eder, Wolfgang Ernst
2016-01-01
Hubka's theory of technical systems (TTS) is briefly outlined. It describes commonalities in all engineering devices, whatever their physical principles of action. This theory is based on a general transformation system (TrfS), which can be used to show engineering in the contexts of society, economics and historic developments. The life cycle of…
Towards Enterprise Integration Performance Assessment based on Category Theory
Mikhnovsky, Victoria; Ormandjieva, Olga
A major difference between what we refer to as a "well-developed" science, such as civil engineering, and sciences which are less so, like enterprise engineering, is the degree to which nonfunctional requirements, such as performance, are integrated into the design and development process, and satisfaction of those requirements is controlled by theoretically valid measurement procedures. This paper introduces the preliminary results, which are aimed at developing a concise formal framework for enterprise performance modeling, measurement, and control during enterprise integration activities. The novelty of this research consists in employing the mathematical category theory for modeling purposes, an approach that is broad enough to formally capture heterogeneous (structural, functional and nonfunctional) requirements, by, for example, using the constructs from the graphical categorical formal language.
Grain Boundaries From Theory to Engineering
Priester, Louisette
2013-01-01
Grain boundaries are a main feature of crystalline materials. They play a key role in determining the properties of materials, especially when grain size decreases and even more so with the current improvements of processing tools and methods that allow us to control various elements in a polycrystal. This book presents the theoretical basis of the study of grain boundaries and aims to open up new lines of research in this area. The treatment is light on mathematical approaches while emphasizing practical examples; the issues they raise are discussed with reference to theories. The general approach of the book has two main goals: to lead the reader from the concept of ‘ideal’ to ‘real’ grain boundaries; to depart from established knowledge and address the opportunities emerging through "grain boundary engineering", the control of morphological and crystallographic features that affect material properties. The book is divided in three parts: I ‘From interganular order to disorder’ deals wit...
Gauge theories and integrable lattice models
International Nuclear Information System (INIS)
Witten, E.
1989-01-01
Investigations of new knot polynomials discovered in the last few years have shown them to be intimately connected with soluble models of two dimensional lattice statistical mechanics. In this paper, these results, which in time may illuminate the whole question of why integrable lattice models exist, are reconsidered from the point of view of three dimensional gauge theory. Expectation values of Wilson lines in three dimensional Chern-Simons gauge theories can be computed by evaluating the partition functions of certain lattice models on finite graphs obtained by projecting the Wilson lines to the plane. The models in question - previously considered in both the knot theory and statistical mechanics literature - are IRF models in which the local Boltzmann weights are the matrix elements of braiding matrices in rational conformal field theories. These matrix elements, in turn, can be represented in three dimensional gauge theory in terms of the expectation value of a certain tetrahedral configuration of Wilson lines. This representation makes manifest a surprising symmetry of the braiding matrix elements in conformal field theory. (orig.)
Tsallis Entropy Theory for Modeling in Water Engineering: A Review
Directory of Open Access Journals (Sweden)
Vijay P. Singh
2017-11-01
Full Text Available Water engineering is an amalgam of engineering (e.g., hydraulics, hydrology, irrigation, ecosystems, environment, water resources and non-engineering (e.g., social, economic, political aspects that are needed for planning, designing and managing water systems. These aspects and the associated issues have been dealt with in the literature using different techniques that are based on different concepts and assumptions. A fundamental question that still remains is: Can we develop a unifying theory for addressing these? The second law of thermodynamics permits us to develop a theory that helps address these in a unified manner. This theory can be referred to as the entropy theory. The thermodynamic entropy theory is analogous to the Shannon entropy or the information theory. Perhaps, the most popular generalization of the Shannon entropy is the Tsallis entropy. The Tsallis entropy has been applied to a wide spectrum of problems in water engineering. This paper provides an overview of Tsallis entropy theory in water engineering. After some basic description of entropy and Tsallis entropy, a review of its applications in water engineering is presented, based on three types of problems: (1 problems requiring entropy maximization; (2 problems requiring coupling Tsallis entropy theory with another theory; and (3 problems involving physical relations.
On using ethical theories to teach engineering ethics.
Bouville, Mathieu
2008-03-01
Many engineering ethics classes and textbooks introduce theories such as utilitarianism and Kantianism (and most others draw from these theories without mentioning them explicitly). Yet using ethical theories to teach engineering ethics is not devoid of difficulty. First, their status is unclear (should one pick a single theory or use them all? does it make a difference?) Also, textbooks generally assume or fallaciously 'prove' that egoism (or even simply accounting for one's interests) is wrong. Further, the drawbacks of ethical theories are underestimated and the theories are also otherwise misrepresented to make them more suitable for engineering ethics as the authors construe it, viz. the 'moral reasoning' process. Stating in what various theories disagree would allow the students to frame the problem more productively in terms of motive-consequence or society-individual dichotomies rather than in terms of Kant-utilitarian.
On integrating Jungian and other theories.
Sedgwick, David
2015-09-01
This paper consists of reflections on some of the processes, subtleties, and 'eros' involved in attempting to integrate Jungian and other analytic perspectives. Assimilation of other theoretical viewpoints has a long history in analytical psychology, beginning when Jung met Freud. Since its inception, the Journal of Analytical Psychology has provided a forum for theoretical syntheses and comparative psychoanalysis. Such attempts at synthesizing other theories represent analytical psychology itself trying to individuate. © 2015, The Society of Analytical Psychology.
Intelligent techniques in engineering management theory and applications
Onar, Sezi
2015-01-01
This book presents recently developed intelligent techniques with applications and theory in the area of engineering management. The involved applications of intelligent techniques such as neural networks, fuzzy sets, Tabu search, genetic algorithms, etc. will be useful for engineering managers, postgraduate students, researchers, and lecturers. The book has been written considering the contents of a classical engineering management book but intelligent techniques are used for handling the engineering management problem areas. This comprehensive characteristics of the book makes it an excellent reference for the solution of complex problems of engineering management. The authors of the chapters are well-known researchers with their previous works in the area of engineering management.
Integration and the hold-up problem in the design organization for engineering projects
Zerjav, Vedran; Hartmann, Timo; Javernick-Will, A.; Chinowsky, P.
2012-01-01
The paper presents a perspective of the design organization in engineering projects based on the economic concept of the hold-up problem. By integrating the economic theories on the boundaries of organizations into the existing knowledge on design in engineering projects, the paper hypothesizes a
An information integration theory of consciousness
Directory of Open Access Journals (Sweden)
Tononi Giulio
2004-11-01
Full Text Available Abstract Background Consciousness poses two main problems. The first is understanding the conditions that determine to what extent a system has conscious experience. For instance, why is our consciousness generated by certain parts of our brain, such as the thalamocortical system, and not by other parts, such as the cerebellum? And why are we conscious during wakefulness and much less so during dreamless sleep? The second problem is understanding the conditions that determine what kind of consciousness a system has. For example, why do specific parts of the brain contribute specific qualities to our conscious experience, such as vision and audition? Presentation of the hypothesis This paper presents a theory about what consciousness is and how it can be measured. According to the theory, consciousness corresponds to the capacity of a system to integrate information. This claim is motivated by two key phenomenological properties of consciousness: differentiation – the availability of a very large number of conscious experiences; and integration – the unity of each such experience. The theory states that the quantity of consciousness available to a system can be measured as the Φ value of a complex of elements. Φ is the amount of causally effective information that can be integrated across the informational weakest link of a subset of elements. A complex is a subset of elements with Φ>0 that is not part of a subset of higher Φ. The theory also claims that the quality of consciousness is determined by the informational relationships among the elements of a complex, which are specified by the values of effective information among them. Finally, each particular conscious experience is specified by the value, at any given time, of the variables mediating informational interactions among the elements of a complex. Testing the hypothesis The information integration theory accounts, in a principled manner, for several neurobiological observations
Integrable theories that are asymptotically CFT
Evans, J M; Jonathan M Evans; Timothy J Hollowood
1995-01-01
A series of sigma models with torsion are analysed which generate their mass dynamically but whose ultra-violet fixed points are non-trivial conformal field theories -- in fact SU(2) WZW models at level k. In contrast to the more familiar situation of asymptotically free theories in which the fixed points are trivial, the sigma models considered here may be termed ``asymptotically CFT''. These theories have previously been conjectured to be quantum integrable; we confirm this by proposing a factorizable S-matrix to describe their infra-red behaviour and then carrying out a stringent test of this proposal. The test involves coupling the theory to a conserved charge and evaluating the response of the free-energy both in perturbation theory to one loop and directly from the S-matrix via the Thermodynamic Bethe Ansatz with a chemical potential at zero temperature. Comparison of these results provides convincing evidence in favour of the proposed S-matrix; it also yields the universal coefficients of the beta-func...
Integrability in heavy quark effective theory
Braun, Vladimir M.; Ji, Yao; Manashov, Alexander N.
2018-06-01
It was found that renormalization group equations in the heavy-quark effective theory (HQET) for the operators involving one effective heavy quark and light degrees of freedom are completely integrable in some cases and are related to spin chain models with the Hamiltonian commuting with the nondiagonal entry C( u) of the monodromy matrix. In this work we provide a more complete mathematical treatment of such spin chains in the QISM framework. We also discuss the relation of integrable models that appear in the HQET context with the large-spin limit of integrable models in QCD with light quarks. We find that the conserved charges and the "ground state" wave functions in HQET models can be obtained from the light-quark counterparts in a certain scaling limit.
Integrated engineering increases flexibility. [At BNFL
Energy Technology Data Exchange (ETDEWEB)
Smith, Ray [British Nuclear Fuels plc, London (UK)
1991-05-01
Integrated Engineering (IE) can be used to describe the best use of increasingly rare good engineering talent in an increasingly competive world. A number of organisations are now moving towards IE without any general agreement on a precise definition. The engineering division of British Nuclear Fuels (BNFL) is one such organisation. This feature covers the reasoning behind the decision, and our experience to date. BNFL engineering division is responsible primarily for the provision of major facilities on BNFL operational sites. This provision includes feasibility, front end and detailed design, procurement, installation and commissioning. Task force working has been used for some of the large projects. But the future workload is expected to comprise many more smaller projects. At the same time, equipment is becoming more complex and the need for mutual understanding and appreciation between disciplines is increasing. To meet this increasing need for flexibility, BNFL has decided to move to the matrix structure of project management and functional departments described in the article. (Author).
Software Engineering and Knowledge Engineering Theory and Practice Volume 2
2012-01-01
The volume includes a set of selected papers extended and revised from the I2009 Pacific-Asia Conference on Knowledge Engineering and Software Engineering (KESE 2009) was held on December 19~ 20, 2009, Shenzhen, China. Volume 2 is to provide a forum for researchers, educators, engineers, and government officials involved in the general areas of Knowledge Engineering and Communication Technology to disseminate their latest research results and exchange views on the future research directions of these fields. 135 high-quality papers are included in the volume. Each paper has been peer-reviewed by at least 2 program committee members and selected by the volume editor Prof.Yanwen Wu. On behalf of the this volume, we would like to express our sincere appreciation to all of authors and referees for their efforts reviewing the papers. Hoping you can find lots of profound research ideas and results on the related fields of Knowledge Engineering and Communication Technology.
Integration and framing between system engineering, enterprise engineering and whole of society
CSIR Research Space (South Africa)
Erasmus, Louwrence D
2017-07-01
Full Text Available with the semantic theoretical constructs of systems levels of Boulding’s General Systems Theory. The construct of systems hierarchy levels addresses the progression from complicated engineered levels to the complexity of human interaction with engineered... predicates in: • A theory of the systems engineering process (Doeben-Henisch, et al., 2008) (Erasmus & Doeben-Henisch, 2011a) • A theory of systems engineering management (SEMBASE) (Erasmus & Doeben-Henisch, 2011b). In the structuralist programme...
Systems engineering and integrated for the SSC
International Nuclear Information System (INIS)
Laintz, D.J.; Crosby, B.; Davis, M.; Eben, D.; Gliozzi, J.; Kientz, E.; Knafelc, J.; Phelps, J.; Rider, M.; Shearer, K.
1989-01-01
Experience in high technology projects of scale and scope similar to the SSC, leads the authors to propose utilization of a Systems Engineering and Integration (SE and I) process tailored specifically to the SSC project. They begin by giving an overview of SE and I. This overview includes the purpose, history, definition, and a discussion of when to use it. They then proceeded to give a description of a formalized SE and I process. They discuss tailoring the process to a project and close by recommending an early commitment to an SE and I methodology for the SSC. 2 refs., 2 figs
Path integral for gauge theories with fermions
International Nuclear Information System (INIS)
Fujikawa, K.
1980-01-01
The Atiyah-Singer index theorem indicates that a naive unitary transformation of basis vectors for fermions interacting with gauge fields is not allowed in general. On the basis of this observation, it was previously shown that the path-integral measure of a gauge-invariant fermion theory is transformed nontrivially under the chiral transformation, and thus leads to a simple derivation of ''anomalous'' chiral Ward-Takahashi identities. We here clarify some of the technical aspects associated with the discussion. It is shown that the Jacobian factor in the path-integral measure, which corresponds to the Adler-Bell-Jackiw anomaly, is independent of any smooth regularization procedure of large eigenvalues of D in Euclidean theory; this property holds in any even-dimensional space-time and also for the gravitational anomaly. The appearance of the anomaly and its connection with the index theorem are thus related to the fact that the primary importance is attached to the Lorentz-covariant ''energy'' operator D and that D and γ 5 do not commute. The abnormal behavior of the path-integral measure at the zero-frequency sector in the presence of instantons and its connection with spontaneous symmetry breaking is also clarified. We comment on several other problems associated with the anomaly and on the Pauli-Villars regularization method
Validation of human factor engineering integrated system
International Nuclear Information System (INIS)
Fang Zhou
2013-01-01
Apart from hundreds of thousands of human-machine interface resources, the control room of a nuclear power plant is a complex system integrated with many factors such as procedures, operators, environment, organization and management. In the design stage, these factors are considered by different organizations separately. However, whether above factors could corporate with each other well in operation and whether they have good human factors engineering (HFE) design to avoid human error, should be answered in validation of the HFE integrated system before delivery of the plant. This paper addresses the research and implementation of the ISV technology based on case study. After introduction of the background, process and methodology of ISV, the results of the test are discussed. At last, lessons learned from this research are summarized. (authors)
Catastrophe theory and its application status in mechanical engineering
Directory of Open Access Journals (Sweden)
Jinge LIU
Full Text Available Catastrophe theory is a kind of mathematical method which aims to apply and interpret the discontinuous phenomenon. Since its emergence, it has been widely used to explain a variety of emergent phenomena in the fields of natural science, social science, management science and some other science and technology fields. Firstly, this paper introduces the theory of catastrophe in several aspects, such as its generation, radical principle, basic characteristics and development. Secondly, it summarizes the main applications of catastrophe theory in the field of mechanical engineering, focusing on the research progress of catastrophe theory in revealing catastrophe of rotor vibration state, analyzing friction and wear failure, predicting metal fracture, and so on. Finally, it advises that later development of catastrophe theory should pay more attention to the combination of itself with other traditional nonlinear theories and methods. This paper provides a beneficial reference to guide the application of catastrophe theory in mechanical engineering and related fields for later research.
Laubichler, Manfred D; Prohaska, Sonja J; Stadler, Peter F
2018-01-01
Reconciling different underlying ontologies and explanatory contexts has been one of the main challenges and impediments for theory integration in biology. Here, we analyze the challenge of developing an inclusive and integrative theory of phenotypic evolution as an example for the broader challenge of developing a theory of theory integration within the life sciences and suggest a number of necessary formal steps toward the resolution of often incompatible (hidden) assumptions. Theory integration in biology requires a better formal understanding of the structure of biological theories The strategy for integrating theories crucially depends on the relationships of the underlying ontologies. © 2018 Wiley Periodicals, Inc.
Improvements of the integral transport theory method
International Nuclear Information System (INIS)
Kavenoky, A.; Lam-Hime, M.; Stankovski, Z.
1979-01-01
The integral transport theory is widely used in practical reactor design calculations however it is computer time consuming for two dimensional calculations of large media. In the first part of this report a new treatment is presented; it is based on the Galerkin method: inside each region the total flux is expanded over a three component basis. Numerical comparison shows that this method can considerably reduce the computing time. The second part of the this report is devoted to homogeneization theory: a straightforward calculation of the fundamental mode for an heterogeneous cell is presented. At first general presentation of the problem is given, then it is simplified to plane geometry and numerical results are presented
Math, Science, and Engineering Integration in a High School Engineering Course: A Qualitative Study
Valtorta, Clara G.; Berland, Leema K.
2015-01-01
Engineering in K-12 classrooms has been receiving expanding emphasis in the United States. The integration of science, mathematics, and engineering is a benefit and goal of K-12 engineering; however, current empirical research on the efficacy of K-12 science, mathematics, and engineering integration is limited. This study adds to this growing…
Integrating ergonomics in design processes: a case study within an engineering consultancy firm
DEFF Research Database (Denmark)
Sørensen, Lene Bjerg; Broberg, Ole
2012-01-01
ergonomics into engineering design processes and how different factors either promote or limit the integration. Based on a grounded theory approach a model illustrating these factors is developed and different hypotheses about how these factors either promote and/or limit the integration of ergonomics...
Global integrability of field theories. Proceedings
International Nuclear Information System (INIS)
Calmet, J.; Seiler, W.M.; Tucker, R.W.
2006-01-01
The GIFT 2006 workshop covers topics related to the Global Integration of Field Theories. These topics span several domains of science including Mathematics, Physics and Computer Science. It is indeed an interdisciplinary event and this feature is well illustrated by the diversity of papers presented at the workshop. Physics is our main target. A simple approach would be to state that we investigate systems of partial differential equations since it is widely believed that they provide a fair description of our world. The questions whether this world is Einsteinian or not, is described by String Theory or not are not however on our agenda. At this stage we have defined what we mean with field theories. To assess what global integrability means we surf on the two other domains of our interest. Mathematics delivers the main methodologies and tools to achieve our goal. It is a trivial remark to say that there exists several approaches to investigate the concept of integrability. Only selected ones are to be found in these proceedings. We do not try to define precisely what global integrability means. Instead, we only suggest two tracks. The first one is by analogy with the design of algorithms, in Computer Algebra or Computer Science, to solve systems of differential equations. The case of ODEs is rather well understood since a constructive methodology exists. Although many experts claim that numerous results do exist to solve systems of PDEs, no constructive decision method exists. This is our first track. The second track follows directly since the real world is described by systems of PDEs, which are mainly non-linear ones. To be able to decide in such a case of the existence of solutions would increase immediately the scope of new technologies applicable to indus trial problems. It is this latter remark that led to the European NEST project with the same name. The GIFT project aims at making progresses in the investigation of field theories through the use of very
Global integrability of field theories. Proceedings
Energy Technology Data Exchange (ETDEWEB)
Calmet, J.; Seiler, W.M.; Tucker, R.W. (eds.)
2006-07-01
The GIFT 2006 workshop covers topics related to the Global Integration of Field Theories. These topics span several domains of science including Mathematics, Physics and Computer Science. It is indeed an interdisciplinary event and this feature is well illustrated by the diversity of papers presented at the workshop. Physics is our main target. A simple approach would be to state that we investigate systems of partial differential equations since it is widely believed that they provide a fair description of our world. The questions whether this world is Einsteinian or not, is described by String Theory or not are not however on our agenda. At this stage we have defined what we mean with field theories. To assess what global integrability means we surf on the two other domains of our interest. Mathematics delivers the main methodologies and tools to achieve our goal. It is a trivial remark to say that there exists several approaches to investigate the concept of integrability. Only selected ones are to be found in these proceedings. We do not try to define precisely what global integrability means. Instead, we only suggest two tracks. The first one is by analogy with the design of algorithms, in Computer Algebra or Computer Science, to solve systems of differential equations. The case of ODEs is rather well understood since a constructive methodology exists. Although many experts claim that numerous results do exist to solve systems of PDEs, no constructive decision method exists. This is our first track. The second track follows directly since the real world is described by systems of PDEs, which are mainly non-linear ones. To be able to decide in such a case of the existence of solutions would increase immediately the scope of new technologies applicable to indus trial problems. It is this latter remark that led to the European NEST project with the same name. The GIFT project aims at making progresses in the investigation of field theories through the use of very
Near-Surface Engineered Environmental Barrier Integrity
International Nuclear Information System (INIS)
Piet, S.J.; Breckenridge, R.P.
2002-01-01
The INEEL Environmental Systems Research and Analysis (ESRA) program has launched a new R and D project on Near-Surface Engineered Environmental Barrier Integrity to increase knowledge and capabilities for using engineering and ecological components to improve the integrity of near-surface barriers used to confine contaminants from the public and the environment. The knowledge gained and the capabilities built will help verify the adequacy of past remedial decisions and enable improved solutions for future cleanup decisions. The research is planned to (a) improve the knowledge of degradation mechanisms (weathering, biological, geological, chemical, radiological, and catastrophic) in times shorter than service life, (b) improve modeling of barrier degradation dynamics, (c) develop sensor systems to identify degradation prior to failure, and (d) provide a better basis for developing and testing of new barrier systems to increase reliability and reduce the risk of failure. Our project combine s selected exploratory studies (benchtop and field scale), coupled effects accelerated aging testing and the meso-scale, testing of new monitoring concepts, and modeling of dynamic systems. The performance of evapo-transpiration, capillary, and grout-based barriers will be examined
Integrating ergonomics in design processes: a case study within an engineering consultancy firm.
Sørensen, Lene Bjerg; Broberg, Ole
2012-01-01
This paper reports on a case study within an engineering consultancy firm, where engineering designers and ergonomists were working together on the design of a new hospital sterile processing plant. The objective of the paper is to gain a better understanding of the premises for integrating ergonomics into engineering design processes and how different factors either promote or limit the integration. Based on a grounded theory approach a model illustrating these factors is developed and different hypotheses about how these factors either promote and/or limit the integration of ergonomics into design processes is presented along with the model.
Developing engineering processes through integrated modelling of product and process
DEFF Research Database (Denmark)
Nielsen, Jeppe Bjerrum; Hvam, Lars
2012-01-01
This article aims at developing an operational tool for integrated modelling of product assortments and engineering processes in companies making customer specific products. Integrating a product model in the design of engineering processes will provide a deeper understanding of the engineering...... activities as well as insight into how product features affect the engineering processes. The article suggests possible ways of integrating models of products with models of engineering processes. The models have been tested and further developed in an action research study carried out in collaboration...... with a major international engineering company....
Engineering surveying theory and examination problems for students
Schofield, W
2013-01-01
Engineering Surveying: Theory and Examination Problems for Students, Volume 1, Third Edition discusses topics concerning engineering surveying techniques and instrumentations. The book is comprised of eight chapters that cover several concerns in engineering survey. Chapter 1 discusses the basic concepts of surveying. Chapter 2 deals with simple and precise leveling, while Chapter 3 covers earthworks. The book also talks about the theodolite and its applications, and then discusses optical distance measurement. Curves, underground and hydrographic surveying, and aspects of dimensional control
Improvement of Engineering Work Efficiency through System Integration
International Nuclear Information System (INIS)
Lee, Sangdae; Jo, Sunghan; Hyun, Jinwoo
2016-01-01
This paper presents the concept of developing an integrated engineering system for ER to improve efficiency and utilization of engineering system. Each process including computer system and database was introduced separately by each department at that different time. Each engineering process has a close relation with other engineering processes. The introduction of processes in a different time has caused the several problems such as lack of interrelationship between engineering processes, lack of integration fleet-wide statistical data, lack of the function of data comparison among plants and increase of access time by different access location on internet. These problems have caused inefficiency of engineering system utilization to get proper information and degraded engineering system utilization. KHNP has introduced and conducted advanced engineering processes to maintain equipment effectively in a highly reliable condition since 2000s. But engineering systems for process implementation have been developed in each department at a different time. This has caused the problems of process inefficiency and data discordance. Integrated Engineering System(IES) to integrate dispersed engineering processes will improve work efficiency and utilization of engineering system because integration system would enable engineer to get total engineering information easily and do engineering work efficiently
Improvement of Engineering Work Efficiency through System Integration
Energy Technology Data Exchange (ETDEWEB)
Lee, Sangdae; Jo, Sunghan; Hyun, Jinwoo [KHNP CRI, Daejeon (Korea, Republic of)
2016-10-15
This paper presents the concept of developing an integrated engineering system for ER to improve efficiency and utilization of engineering system. Each process including computer system and database was introduced separately by each department at that different time. Each engineering process has a close relation with other engineering processes. The introduction of processes in a different time has caused the several problems such as lack of interrelationship between engineering processes, lack of integration fleet-wide statistical data, lack of the function of data comparison among plants and increase of access time by different access location on internet. These problems have caused inefficiency of engineering system utilization to get proper information and degraded engineering system utilization. KHNP has introduced and conducted advanced engineering processes to maintain equipment effectively in a highly reliable condition since 2000s. But engineering systems for process implementation have been developed in each department at a different time. This has caused the problems of process inefficiency and data discordance. Integrated Engineering System(IES) to integrate dispersed engineering processes will improve work efficiency and utilization of engineering system because integration system would enable engineer to get total engineering information easily and do engineering work efficiently.
Advances in Integrated Computational Materials Engineering "ICME"
Hirsch, Jürgen
The methods of Integrated Computational Materials Engineering that were developed and successfully applied for Aluminium have been constantly improved. The main aspects and recent advances of integrated material and process modeling are simulations of material properties like strength and forming properties and for the specific microstructure evolution during processing (rolling, extrusion, annealing) under the influence of material constitution and process variations through the production process down to the final application. Examples are discussed for the through-process simulation of microstructures and related properties of Aluminium sheet, including DC ingot casting, pre-heating and homogenization, hot and cold rolling, final annealing. New results are included of simulation solution annealing and age hardening of 6xxx alloys for automotive applications. Physically based quantitative descriptions and computer assisted evaluation methods are new ICME methods of integrating new simulation tools also for customer applications, like heat affected zones in welding of age hardening alloys. The aspects of estimating the effect of specific elements due to growing recycling volumes requested also for high end Aluminium products are also discussed, being of special interest in the Aluminium producing industries.
Irreducible integrable theories form tensor products of conformal models
International Nuclear Information System (INIS)
Mathur, S.D.; Warner, N.P.
1991-01-01
By using Toda field theories we show that there are perturbations of direct products of conformal theories that lead to irreducible integrable field theories. The same affine Toda theory can be truncated to different quantum integrable models for different choices of the charge at infinity and the coupling. The classification of integrable models that can be obtained in this fashion follows the classification of symmetric spaces of type G/H with rank H = rank G. (orig.)
Software engineering turning theory into practice
Jones, Robert
1996-01-01
The term 'Software Engineering' was coined in the mid 1960s, it is said, as a challenge to the software community to start rationalising the software production process. Software engineering is a very young discipline and this challenge still eludes LHC demands software production on a scale far beyond that previously addressed in HEP and we are relying on software engineering to allow a significant number of people address this problem collectively. This series of lectures presents the basics of software engineering from the developer's point of view. The aim is to show how individual developers can improve the quality of the software they produce while avoiding the conflict between the creative process of designing software and the organisational needs of large projects.The Laser Interferometer Gravitanional Wave Observatory (LIGO) is being constructed with a goal to detect these waves and then to use them as a new tool to explore and study The sources of gravitanional waves and techniques for detection wil...
Concise Review: Organ Engineering: Design, Technology, and Integration
Kaushik, G.; Leijten, Jeroen Christianus Hermanus; Khademhosseini, A.
Engineering complex tissues and whole organs has the potential to dramatically impact translational medicine in several avenues. Organ engineering is a discipline that integrates biological knowledge of embryological development, anatomy, physiology, and cellular interactions with enabling
Interdisciplinarity to Integrate Knowledge in Engineering
Directory of Open Access Journals (Sweden)
Stella Abreu
2017-06-01
Full Text Available This paper is an extension of work originally presented at the 2nd International Conference of the Portuguese Society for Engineering Education and aims to describe an interdisciplinarity teaching experiment involving three subjects of the scientific area of Mathematics and a fourth one in the area of Management. Using only one project, the students developed skills, in an integrated way, in the fields of the subjects involved. The structure of the project is described in detail. It is shown how the knowledge obtained in the different subjects is needed and how it connects together to answer the proposed challenges. We report the progress of the students’ work, the main difficulties and the skills developed during this process. We conclude with a reflection on the main problems and gains that may arise in similar projects.
Systems Engineering and Integration (SE and I)
Chevers, ED; Haley, Sam
1990-01-01
The issue of technology advancement and future space transportation vehicles is addressed. The challenge is to develop systems which can be evolved and improved in small incremental steps where each increment reduces present cost, improves, reliability, or does neither but sets the stage for a second incremental upgrade that does. Future requirements are interface standards for commercial off the shelf products to aid in the development of integrated facilities; enhanced automated code generation system slightly coupled to specification and design documentation; modeling tools that support data flow analysis; and shared project data bases consisting of technical characteristics cast information, measurement parameters, and reusable software programs. Topics addressed include: advanced avionics development strategy; risk analysis and management; tool quality management; low cost avionics; cost estimation and benefits; computer aided software engineering; computer systems and software safety; system testability; and advanced avionics laboratories - and rapid prototyping. This presentation is represented by viewgraphs only.
Decision Engines for Software Analysis Using Satisfiability Modulo Theories Solvers
Bjorner, Nikolaj
2010-01-01
The area of software analysis, testing and verification is now undergoing a revolution thanks to the use of automated and scalable support for logical methods. A well-recognized premise is that at the core of software analysis engines is invariably a component using logical formulas for describing states and transformations between system states. The process of using this information for discovering and checking program properties (including such important properties as safety and security) amounts to automatic theorem proving. In particular, theorem provers that directly support common software constructs offer a compelling basis. Such provers are commonly called satisfiability modulo theories (SMT) solvers. Z3 is a state-of-the-art SMT solver. It is developed at Microsoft Research. It can be used to check the satisfiability of logical formulas over one or more theories such as arithmetic, bit-vectors, lists, records and arrays. The talk describes some of the technology behind modern SMT solvers, including the solver Z3. Z3 is currently mainly targeted at solving problems that arise in software analysis and verification. It has been applied to various contexts, such as systems for dynamic symbolic simulation (Pex, SAGE, Vigilante), for program verification and extended static checking (Spec#/Boggie, VCC, HAVOC), for software model checking (Yogi, SLAM), model-based design (FORMULA), security protocol code (F7), program run-time analysis and invariant generation (VS3). We will describe how it integrates support for a variety of theories that arise naturally in the context of the applications. There are several new promising avenues and the talk will touch on some of these and the challenges related to SMT solvers. Proceedings
Social Network Theory in Engineering Education
Simon, Peter A.
Collaborative groups are important both in the learning environment of engineering education and, in the real world, the business of engineering design. Selecting appropriate individuals to form an effective group and monitoring a group's progress are important aspects of successful task performance. This exploratory study looked at using the concepts of cognitive social structures, structural balance, and centrality from social network analysis as well as the measures of emotional intelligence. The concepts were used to analyze potential team members to examine if an individual's ability to perceive emotion in others and the self and to use, understand, and manage those emotions are a factor in a group's performance. The students from a capstone design course in computer engineering were used as volunteer subjects. They were formed into groups and assigned a design exercise to determine whether and which of the above-mentioned tools would be effective in both selecting teams and predicting the quality of the resultant design. The results were inconclusive with the exception of an individual's ability to accurately perceive emotions. The instruments that were successful were the Self-Monitoring scale and the accuracy scores derived from cognitive social structures and Level IV of network levels of analysis.
Muldowney, Patrick
2012-01-01
A Modern Theory of Random Variation is a new and radical re-formulation of the mathematical underpinnings of subjects as diverse as investment, communication engineering, and quantum mechanics. Setting aside the classical theory of probability measure spaces, the book utilizes a mathematically rigorous version of the theory of random variation that bases itself exclusively on finitely additive probability distribution functions. In place of twentieth century Lebesgue integration and measure theory, the author uses the simpler concept of Riemann sums, and the non-absolute Riemann-type integration of Henstock. Readers are supplied with an accessible approach to standard elements of probability theory such as the central limmit theorem and Brownian motion as well as remarkable, new results on Feynman diagrams and stochastic integrals. Throughout the book, detailed numerical demonstrations accompany the discussions of abstract mathematical theory, from the simplest elements of the subject to the most complex. I...
Mathematical and Scientific Foundations for an Integrative Engineering Curriculum.
Carr, Robin; And Others
1995-01-01
Describes the Mathematical and Scientific Foundations of Engineering curriculum which emphasizes the mathematical and scientific concepts common to all engineering fields. Scientists and engineers together devised topics and experiments that emphasize the relevance of theory to real-world applications. Presents material efficiently while building…
Reverse Engineering Integrated Circuits Using Finite State Machine Analysis
Energy Technology Data Exchange (ETDEWEB)
Oler, Kiri J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Miller, Carl H. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)
2016-04-12
In this paper, we present a methodology for reverse engineering integrated circuits, including a mathematical verification of a scalable algorithm used to generate minimal finite state machine representations of integrated circuits.
Software engineering design theory and practice
Otero, Carlos
2012-01-01
… intended for use as a textbook for an advanced course in software design. Each chapter ends with review questions and references. … provides an overview of the software development process, something that would not be out of line in a course on software engineering including such topics as software process, software management, balancing conflicting values of stakeholders, testing, quality, and ethics. The author has principally focused on software design though, extracting the design phase from the surrounding software development lifecycle. … Software design strategies are addressed
The Effects of Integrating Laboratory Work with Theory on Academic ...
African Journals Online (AJOL)
The Effects of Integrating Laboratory Work with Theory on Academic Achievement in Secondary School Physics. ... Journal Home > Vol 4, No 4 (2010) > ... better than those taught by treating practical work after and separate from theory.
Functional integral approach to string theories
International Nuclear Information System (INIS)
Sakita, B.
1987-01-01
Fermionic string theory can be made supersymmetric: the superstring. It contains among others mass zero gauge fields of spin 1 and 2. The recent revival of interests in string field theories is due to the recognition of the compactified superstring theory as a viable theory of grandunification of all interactions, especially after Green and Schwarz's discovery of the gauge and gravitational anomaly cancellation in 0(32) superstring theory. New developments include string phenomenology, general discussions of compactification, new models, especially the heterotic string. These are either applications or extensions of string field theories. Although these are very exciting developments, the author limits his attention to the basics of the bosonic string theory
High School Engineering and Technology Education Integration through Design Challenges
Mentzer, Nathan
2011-01-01
This study contextualized the use of the engineering design process by providing descriptions of how each element in a design process was integrated in an eleventh grade industry and engineering systems course. The guiding research question for this inquiry was: How do students engage in the engineering design process in a course where technology…
The Engineering Workforce of Tomorrow - The Integrated Space Engineer
DEFF Research Database (Denmark)
Nielsen, Jens Frederik Dalsgaard
2007-01-01
The space engineer of tomorrow needs a variety of skills ranging from high specialized knowledge to cooperative capacities and the ability to understand and even to a certain degree to be productive outside their specialized skills. Newly educated engineers often lack many of these skills due...
ADVANCED COMPRESSOR ENGINE CONTROLS TO ENHANCE OPERATION, RELIABILITY AND INTEGRITY
Energy Technology Data Exchange (ETDEWEB)
Gary D. Bourn; Jess W. Gingrich; Jack A. Smith
2004-03-01
This document is the final report for the ''Advanced Compressor Engine Controls to Enhance Operation, Reliability, and Integrity'' project. SwRI conducted this project for DOE in conjunction with Cooper Compression, under DOE contract number DE-FC26-03NT41859. This report addresses an investigation of engine controls for integral compressor engines and the development of control strategies that implement closed-loop NOX emissions feedback.
Affordances in activity theory and cognitive systems engineering
DEFF Research Database (Denmark)
Albrechtsen, H.; Andersen, H.H.K.; Bødker, S.
2001-01-01
on design for low level interaction modalities. To incorporate the concept of affordances in the design of human computer interaction it is necessary to systematically unravel affordances that supporthuman action possibilities. Furthermore, it is a necessity that Gibson's theory of affordances...... is supplemented by careful analyses of other human modalities and activities than visual perception. Within HMI two well established perspectives on HMI,Activity Theory (AT) and Cognitive Systems Engineering (CSE), have discussed such analyses and design of action possibilities focusing on providing computer...... to cover deeper semantic and pragmatic aspects of the ecology of work, as compared with the previous applications of Gibson's theory in HMI....
Beekhoven, S.; De Jong, U.; Van Hout, H.
2002-01-01
Compared elements of rational choice theory and integration theory on the basis of their power to explain variance in academic progress. Asserts that the concepts should be combined, and the distinction between social and academic integration abandoned. Empirical analysis showed that an extended model, comprising both integration and rational…
Integrating design and purchasing [in nuclear engineering] with Ingecad
International Nuclear Information System (INIS)
Anon.
1989-01-01
Ingecad was developed by the Ingevision division of Framatome to overcome deficiencies in traditional computer-aided design. It was developed for nuclear power project engineering around the principle of the shared management of a common database, thus making it possible to integrate several engineering disciplines. The multiuser database is managed and accessed by the different application softwares, corresponding to particular aspects of the engineering task: electrical and process control schematics; plant piping design; pressurized equipment design etc. The use of a common database ensures coherence between the different engineering disciplines, particularly between the process engineering, the plant layout design, the piping, and the instrumentation and control engineering. (author)
MACCIA, ELIZABETH S.; AND OTHERS
AN ANNOTATED BIBLIOGRAPHY OF 20 ITEMS AND A DISCUSSION OF ITS SIGNIFICANCE WAS PRESENTED TO DESCRIBE CURRENT UTILIZATION OF SUBJECT THEORIES IN THE CONSTRUCTION OF AN EDUCATIONAL THEORY. ALSO, A THEORY MODEL WAS USED TO DEMONSTRATE CONSTRUCTION OF A SCIENTIFIC EDUCATIONAL THEORY. THE THEORY MODEL INCORPORATED SET THEORY (S), INFORMATION THEORY…
Statistics and Probability Theory In Pursuit of Engineering Decision Support
Faber, Michael Havbro
2012-01-01
This book provides the reader with the basic skills and tools of statistics and probability in the context of engineering modeling and analysis. The emphasis is on the application and the reasoning behind the application of these skills and tools for the purpose of enhancing decision making in engineering. The purpose of the book is to ensure that the reader will acquire the required theoretical basis and technical skills such as to feel comfortable with the theory of basic statistics and probability. Moreover, in this book, as opposed to many standard books on the same subject, the perspective is to focus on the use of the theory for the purpose of engineering model building and decision making. This work is suitable for readers with little or no prior knowledge on the subject of statistics and probability.
Vehicle Systems Engineering and Integration Activities
2012-08-31
liter turbo diesel Bolt on armor required upgraded suspension, engine, and steering Mattracks or wheels Imbalance in cupola required motorized...liter turbo diesel engine, a new transmission, improved suspension and frame for an increased armor capability, 1,800- 4,400 lb payload and GVW 18,000...space (14 cubic feet), enhanced 6500 turbo diesel engine, higher capacity transmission, air induction system and exhaust systems. Lessons
Managing heterogeneous knowledge: A Theory of External Knowledge Integration
Kraaijenbrink, Jeroen; Wijnhoven, Alphonsus B.J.M.
2008-01-01
Knowledge integration has been theorised at the levels of organisations and inter-organisational dyads. However, no theory exists yet of the integration of knowledge from an organisation's environment. This paper addresses this void in the literature by presenting a theory of external knowledge
Integrated Moral Conviction Theory of Student Cheating: An Empirical Test
Roberts, Foster; Thomas, Christopher H.; Novicevic, Milorad M.; Ammeter, Anthony; Garner, Bart; Johnson, Paul; Popoola, Ifeoluwa
2018-01-01
In this article, we develop an "integrated moral conviction theory of student cheating" by integrating moral conviction with (a) the dual-process model of Hunt-Vitell's theory that gives primacy to individual ethical philosophies when moral judgments are made and (b) the social cognitive conceptualization that gives primacy to moral…
Contemporary Neighborhood Theories: Integration versus Romance and Reaction.
Stever, James A.
1978-01-01
This paper discusses the integrative, romantic, and reactive theories of neighborhood government within the context of the urban reform movement and argues that the integrative theory is the one best suited for an effective political relationship between the neighborhood and the greater metropolis. (EB)
Integrated two-cylinder liquid piston Stirling engine
Yang, Ning; Rickard, Robert; Pluckter, Kevin; Sulchek, Todd
2014-10-01
Heat engines utilizing the Stirling cycle may run on low temperature differentials with the capacity to function at high efficiency due to their near-reversible operation. However, current approaches to building Stirling engines are laborious and costly. Typically the components are assembled by hand and additional components require a corresponding increase in manufacturing complexity, akin to electronics before the integrated circuit. We present a simple and integrated approach to fabricating Stirling engines with precisely designed cylinders. We utilize computer aided design and one-step, planar machining to form all components of the engine. The engine utilizes liquid pistons and displacers to harness useful work from heat absorption and rejection. As a proof of principle of the integrated design, a two-cylinder engine is produced and characterized and liquid pumping is demonstrated.
Integrated two-cylinder liquid piston Stirling engine
Energy Technology Data Exchange (ETDEWEB)
Yang, Ning; Rickard, Robert; Pluckter, Kevin; Sulchek, Todd, E-mail: todd.sulchek@me.gatech.edu [George W. Woodruff School of Mechanical Engineering and Parker H. Petit Institute for Bioengineering and Bioscience, Georgia Institute of Technology, Atlanta, Georgia 30332 (United States)
2014-10-06
Heat engines utilizing the Stirling cycle may run on low temperature differentials with the capacity to function at high efficiency due to their near-reversible operation. However, current approaches to building Stirling engines are laborious and costly. Typically the components are assembled by hand and additional components require a corresponding increase in manufacturing complexity, akin to electronics before the integrated circuit. We present a simple and integrated approach to fabricating Stirling engines with precisely designed cylinders. We utilize computer aided design and one-step, planar machining to form all components of the engine. The engine utilizes liquid pistons and displacers to harness useful work from heat absorption and rejection. As a proof of principle of the integrated design, a two-cylinder engine is produced and characterized and liquid pumping is demonstrated.
Integrated two-cylinder liquid piston Stirling engine
International Nuclear Information System (INIS)
Yang, Ning; Rickard, Robert; Pluckter, Kevin; Sulchek, Todd
2014-01-01
Heat engines utilizing the Stirling cycle may run on low temperature differentials with the capacity to function at high efficiency due to their near-reversible operation. However, current approaches to building Stirling engines are laborious and costly. Typically the components are assembled by hand and additional components require a corresponding increase in manufacturing complexity, akin to electronics before the integrated circuit. We present a simple and integrated approach to fabricating Stirling engines with precisely designed cylinders. We utilize computer aided design and one-step, planar machining to form all components of the engine. The engine utilizes liquid pistons and displacers to harness useful work from heat absorption and rejection. As a proof of principle of the integrated design, a two-cylinder engine is produced and characterized and liquid pumping is demonstrated.
Vertical Integration and Reverse Engineering of Agricultural Enterprises
Institute of Scientific and Technical Information of China (English)
Gang; WU; Yong; DU
2014-01-01
This paper studies the potential effects of agricultural enterprise’s vertical integration and reverse engineering on downstream firms.Suppliers who invest reverse engineering technology can exploit customer’s information. An integrated supplier can obtain at no cost the information from its subsidiary. Based on repeated game and considered corporate " good" or " bad" type,this paper analysis supplier’s selection and downstream investment in innovation. The results showed that: when the cost is higher than the threshold value no company invest in reverse engineering,when the cost is lower than the threshold value the integration company invest in reverse engineering; in the second period,vertical integration reduce the downstream independent enterprise’s innovation investment and profits,integrated enterprise increase innovation investment and profits; during the first period of the game,the independent downstream firms being " completely foreclosure".
Integrating sustainability in Engineering Education in Denmark
DEFF Research Database (Denmark)
Jørgensen, Ulrik; Valderrama Pineda, Andres Felipe; Remmen, Arne
2013-01-01
How to include sustainability in engineering education is currently the main concern among engineering educators. In one way or another, engineering educators are increasingly addressing sustainability issues in the courses they teach, the programs they design and run, the institutional activities...... to be a broader social concern to be taken across programs or eventually in specialised new professional endeavours? To further this discussion, in the second part of this paper we examine how environmental, energy and sustainability we will present some details of the design of the Master Engineering programs...... on Sustainable Cities and Sustainable Design at Aalborg University in Denmark. These programs claim to have developed effective strategies for educating robust engineers capable of dealing with the complexities of the needed calculations and the modelling of physical processes and at the same time able to cope...
Some open problems in random matrix theory and the theory of integrable systems
Deift, Percy
2007-01-01
We describe a list of open problems in random matrix theory and integrable systems which was presented at the conference ``Integrable Systems, Random Matrices, and Applications'' at the Courant Institute in May 2006.
An integral equation arising in two group neutron transport theory
International Nuclear Information System (INIS)
Cassell, J S; Williams, M M R
2003-01-01
An integral equation describing the fuel distribution necessary to maintain a flat flux in a nuclear reactor in two group transport theory is reduced to the solution of a singular integral equation. The formalism developed enables the physical aspects of the problem to be better understood and its relationship with the corresponding diffusion theory model is highlighted. The integral equation is solved by reducing it to a non-singular Fredholm equation which is then evaluated numerically
Integrable deformations of affine Toda theories and duality
International Nuclear Information System (INIS)
Fateev, V.A.
1996-01-01
We introduce and study five series of one-parameter families of two-dimensional integrable quantum field theories. These theories have a Lagrangian description in terms of the massive Thirring model coupled with non-simply laced affine Toda theories. Perturbative calculations, analysis of the factorized scattering theory and the Bethe ansatz technique are used to show that these field theories possess the dual representation available for the perturbative analysis in the strong coupling limit. The dual theory can be formulated as the non-linear sigma model with Witten's Euclidean black hole metric (complex sinh-Gordon theory) coupled with non-simply laced affine Toda theories. Lie algebras associated with these ''dual'' Toda theories belong to the dual series of affine algebras but have a smaller rank. The exact relation between coupling constants in the dual theories is conjectured. (orig.)
Real analysis an introduction to the theory of real functions and integration
Dshalalow, Jewgeni H
2000-01-01
Designed for use in a two-semester course on abstract analysis, REAL ANALYSIS: An Introduction to the Theory of Real Functions and Integration illuminates the principle topics that constitute real analysis. Self-contained, with coverage of topology, measure theory, and integration, it offers a thorough elaboration of major theorems, notions, and constructions needed not only by mathematics students but also by students of statistics and probability, operations research, physics, and engineering.Structured logically and flexibly through the author''s many years of teaching experience, the material is presented in three main sections:Part 1, chapters 1through 3, covers the preliminaries of set theory and the fundamentals of metric spaces and topology. This section can also serves as a text for first courses in topology.Part II, chapter 4 through 7, details the basics of measure and integration and stands independently for use in a separate measure theory course.Part III addresses more advanced topics, includin...
Automated computation of one-loop integrals in massless theories
International Nuclear Information System (INIS)
Hameren, A. van; Vollinga, J.; Weinzierl, S.
2005-01-01
We consider one-loop tensor and scalar integrals, which occur in a massless quantum field theory, and we report on the implementation into a numerical program of an algorithm for the automated computation of these one-loop integrals. The number of external legs of the loop integrals is not restricted. All calculations are done within dimensional regularization. (orig.)
Integrated Computational Material Engineering Technologies for Additive Manufacturing, Phase I
National Aeronautics and Space Administration — QuesTek Innovations, a pioneer in Integrated Computational Materials Engineering (ICME) and a Tibbetts Award recipient, is teaming with University of Pittsburgh,...
Elements of quantum computing history, theories and engineering applications
Akama, Seiki
2015-01-01
A quantum computer is a computer based on a computational model which uses quantum mechanics, which is a subfield of physics to study phenomena at the micro level. There has been a growing interest on quantum computing in the 1990's, and some quantum computers at the experimental level were recently implemented. Quantum computers enable super-speed computation, and can solve some important problems whose solutions were regarded impossible or intractable with traditional computers. This book provides a quick introduction to quantum computing for readers who have no backgrounds of both theory of computation and quantum mechanics. “Elements of Quantum Computing” presents the history, theories, and engineering applications of quantum computing. The book is suitable to computer scientists, physicist, and software engineers.
Integral methods in science and engineering theoretical and practical aspects
Constanda, C; Rollins, D
2006-01-01
Presents a series of analytic and numerical methods of solution constructed for important problems arising in science and engineering, based on the powerful operation of integration. This volume is meant for researchers and practitioners in applied mathematics, physics, and mechanical and electrical engineering, as well as graduate students.
Integrating ergonomics into engineering design: The role of objects
DEFF Research Database (Denmark)
Hall-Andersen, Lene Bjerg; Broberg, Ole
2014-01-01
The objective of this study was to explore the role of objects in integrating ergonomic knowledge in engineering design processes. An engineering design case was analyzed using the theoretical concepts of boundary objects and intermediary objects: Boundary objects facilitate collaboration between...
Effective Integration of Life Cycle Engineering in Education
Oude Luttikhuis, Ellen; Toxopeus, Marten E.; Lutters, Diederick
2015-01-01
In practice, applying life cycle engineering in product design and development requires an integrated approach, because of the many stakeholders and variables (e.g. cost, environmental impact, energy, safety, quality) involved in a complete product life cycle. In educating young engineers, the same
Boundary conditions in conformal and integrable theories
Petkova, V B
2000-01-01
The study of boundary conditions in rational conformal field theories is not only physically important. It also reveals a lot on the structure of the theory ``in the bulk''. The same graphs classify both the torus and the cylinder partition functions and provide data on their hidden ``quantum symmetry''. The Ocneanu triangular cells -- the 3j-symbols of these symmetries, admit various interpretations and make a link between different problems.
Explaining academic progress via combining concepts of integration theory and rational choice theory
Beekhoven, S.; Jong, U. de; Hout, J.F.M.J. van
2002-01-01
In this article, elements of rational choice theory and integration theory are compared on the basis of their explanatory power to explain variance in academic progress. It is argued that both theoretical concepts could be combined. Furthermore the distinction between social and academic integration
Differential and integral forms in supergauge theories and supergravity
International Nuclear Information System (INIS)
Zupnik, B.M.; Pak, D.G.
1989-01-01
D = 3, 4, N = 1 supergauge theories and D = 3, N = 1 supergravity are considered in the superfield formalism by using differential and integral forms. A special map of the space of differential forms into the space of integral forms is proposed. By means of this map we find the superfield Chern-Simons terms in D = 3, N = 1 Yang-Mills theory and supergravity. The integral forms corresponding to superfield invariants of D = 4, N = 1 supergauge theory have also been constructed. (Author)
Grand Theories of Personality Cannot Be Integrated
Wood, Alex; Joseph, Stephen
2007-01-01
Comments on the original article "A New Big Five: Fundamental Principles for an Integrative Science of Personality," by Dan P. McAdams and Jennifer L. Pals (see record 2006-03947-002). McAdams and Pals (April 2006) presented a new model to integrate the field of personality psychology. Cultural and evolutionary factors interact with an…
Bassett, Jonathan F.
2007-01-01
The author attempts to integrate Terror Management Theory (TMT) and R. W. Firestone's Separation Theory (1984, 1994). Both theories emphasize defense against death anxiety as a key human motive. Whereas TMT focuses extensively on self-esteem and cultural worldview, Firestone posited additional defenses such as gene survival, self-nourishing…
Theory and Practice: thinking styles in engineering and science
Directory of Open Access Journals (Sweden)
Hanspeter Schmid
2001-11-01
Full Text Available This paper describes knowledge as an element of thinking styles, which are properties of thinking collectives. According to the theory outlined here, the choice of a thinking style to solve a certain problem is relative, but once the thinking has been chosen, realism prevails. This paper also describes the genesis and development of thinking styles and, with them, of facts. The theoretical concepts are illustrated with two examples of thinking styles: a description of the thinking styles of circuit theorists and circuit designers (theory vs. practice, and a comparison of the thinking styles of two closely related technical societies of the Institute of Electrical and Electronics Engineers (IEEE. Applications of the theory are also presented in this paper; they include information management, documentation tools, and writing styles, and mainly draw from the author's own experience with these topics.
Integrating ecosystem engineering and food webs
Sanders, Dirk; Jones, Clive G.; Thebault, Elisa; Bouma, Tjeerd J.; van der Heide, Tjisse; van Belzen, Jim; Barot, Sebastien
Ecosystem engineering, the physical modification of the environment by organisms, is a common and often influential process whose significance to food web structure and dynamics is largely unknown. In the light of recent calls to expand food web studies to include non-trophic interactions, we
PHYTOREMEDIATION: INTEGRATING ART AND ENGINEERING THROUGH PLANTING
Landscape Architecture and Remediation Engineering are related fields, united by common areas of endeavor, yet they have strikingly different languages, techniques, and habits of thought. What unites the fields is the fact that they often work on the same site, with the common go...
Integrating ecosystem engineering and food webs
Sanders, D.; Jones, C.G.; Thébault, E.; Bouma, T.J.; van der Heide, T.; van Belzen, J.; Barot, S.
2014-01-01
Ecosystem engineering, the physical modification of the environment by organisms, is a common and often influential process whose significance to food web structure and dynamics is largely unknown. In the light of recent calls to expand food web studies to include non-trophic interactions, we
Integration of safety engineering into a cost optimized development program.
Ball, L. W.
1972-01-01
A six-segment management model is presented, each segment of which represents a major area in a new product development program. The first segment of the model covers integration of specialist engineers into 'systems requirement definition' or the system engineering documentation process. The second covers preparation of five basic types of 'development program plans.' The third segment covers integration of system requirements, scheduling, and funding of specialist engineering activities into 'work breakdown structures,' 'cost accounts,' and 'work packages.' The fourth covers 'requirement communication' by line organizations. The fifth covers 'performance measurement' based on work package data. The sixth covers 'baseline requirements achievement tracking.'
Integrating Biogeography with Contemporary Niche Theory.
Godsoe, William; Jankowski, Jill; Holt, Robert D; Gravel, Dominique
2017-07-01
There is no consensus on when biotic interactions impact the range limits of species. Starting from MacArthur's use of invasibility to understand how biotic interactions influence coexistence, here we examine how biotic interactions shape species distributions. Range limits emerge from how birth, death, and movement rates vary with the environment. We clarify some basic issues revolving around niche definitions, illustrated with simple resource-consumer theory. We then highlight two different avenues for linking community theory and range theory; the first based on calculating the effects of biotic interactions on range limits across scales and landscape configurations, and the second based on aggregate measures of diffuse interactions and network strength. We conclude with suggestions for a future research agenda. Copyright © 2017 Elsevier Ltd. All rights reserved.
Perturbation theory and importance functions in integral transport formulations
International Nuclear Information System (INIS)
Greenspan, E.
1976-01-01
Perturbation theory expressions for the static reactivity derived from the flux, collision density, birth-rate density, and fission-neutron density formulations of integral transport theory, and from the integro-differential formulation, are intercompared. The physical meaning and relation of the adjoint functions corresponding to each of the five formulations are established. It is found that the first-order approximation of the perturbation expressions depends on the transport theory formulation and on the adjoint function used. The approximations of the integro-differential formulation corresponding to different first-order approximations of the integral transport theory formulations are identified. It is found that the accuracy of all first-order approximations of the integral transport formulations examined is superior to the accuracy of first-order integro-differential perturbation theory
Integrated landscape approach : Closing the gap between theory and application
Bürgi, Matthias; Ali, Panna; Chowdhury, Afroza; Heinimann, Andreas; Hett, Cornelia; Kienast, Felix; Mondal, Manoranjan Kumar; Upreti, Bishnu Raj; Verburg, Peter H.
2017-01-01
Recently, the integrated landscape approach has gained increasing interest of the scientific community, as well as of organizations active in the field of sustainable development. However, the enthusiastic welcome is challenged by little consensus on theory, terminology and definitions. Moreover,
PERSONALITY THEORY IN INTEGRATIVE PERSONALITY-ORIENTED RECONSTRUCTIVE PSYCHOTHERAPY
Directory of Open Access Journals (Sweden)
V I Kurpatov
2010-01-01
approaches. V.N. Myasishchev's theory of personality relations in association with its universality, as well as pathogenetic psychotherapy may be the basis for the integration of other methods of psychotherapy
Notation for integrals of transport theory
International Nuclear Information System (INIS)
Lewins, J.D.
1993-01-01
Like many authors in nuclear reactor physics, I have been careless in my notation but now I regret my deficiences! This letter attempts redress in calling upon my colleagues to take more care in writing integrals as they occur in our trade. I draw attention to what are common errors, with examples drawn from standard tests and well-established journals. I mean no disrespect to their authors and editors; we have, nearly all of us, not written what we meant. I propose that we should undertake to follow a more rigorous notation. It is convenient to divide the examination into a section studying integrals over the unit directional vector Ω and subsequently apply the principles appropriate to that class of integrals to integrals over a vector phase-space. (Author)
Integrable Hamiltonian systems and spectral theory
Moser, J
1981-01-01
Classical integrable Hamiltonian systems and isospectral deformations ; geodesics on an ellipsoid and the mechanical system of C. Neumann ; the Schrödinger equation for almost periodic potentials ; finite band potentials ; limit cases, Bargmann potentials.
Integration of Sustainable Development in Sanitary Engineering Education in Sweden
Rydhagen, B.; Dackman, C.
2011-01-01
In the Swedish Act for higher education, as well as in the policies of technical universities, it is stated that sustainable development (SD) should be integrated into engineering education. Researchers argue that SD needs to be integrated into the overall course content rather than added as a specific course. In this paper, six engineering…
Concise Review: Organ Engineering: Design, Technology, and Integration.
Kaushik, Gaurav; Leijten, Jeroen; Khademhosseini, Ali
2017-01-01
Engineering complex tissues and whole organs has the potential to dramatically impact translational medicine in several avenues. Organ engineering is a discipline that integrates biological knowledge of embryological development, anatomy, physiology, and cellular interactions with enabling technologies including biocompatible biomaterials and biofabrication platforms such as three-dimensional bioprinting. When engineering complex tissues and organs, core design principles must be taken into account, such as the structure-function relationship, biochemical signaling, mechanics, gradients, and spatial constraints. Technological advances in biomaterials, biofabrication, and biomedical imaging allow for in vitro control of these factors to recreate in vivo phenomena. Finally, organ engineering emerges as an integration of biological design and technical rigor. An overall workflow for organ engineering and guiding technology to advance biology as well as a perspective on necessary future iterations in the field is discussed. Stem Cells 2017;35:51-60. © 2016 AlphaMed Press.
A network analysis of leadership theory : the infancy of integration.
Meuser, J. D.; Gardner, W. L.; Dinh, J. E.; Hu, J.; Liden, R. C.; Lord, R. G.
2016-01-01
We investigated the status of leadership theory integration by reviewing 14 years of published research (2000 through 2013) in 10 top journals (864 articles). The authors of these articles examined 49 leadership approaches/theories, and in 293 articles, 3 or more of these leadership approaches were included in their investigations. Focusing on these articles that reflected relatively extensive integration, we applied an inductive approach and used graphic network analysis as a guide for drawi...
An Integrated Framework for Life Cycle Engineering
DEFF Research Database (Denmark)
Hauschild, Michael Zwicky; Herrmann, Christoph; Kara, Sami
2017-01-01
Life Cycle Engineering (LCE) was introduced as a concept more than 24 years ago in order to address emerging concerns about environmental sustainability in engineering. A number of methods and tools have been introduced to operationalise the LCE concept, but since then, the scope of sustainability...... has broadened, and as a result, LCE has evolved in parallel with other disciplines with similar aims. Currently, in addition to LCE, there exist a number of concepts such as Industrial Ecology, Cleaner Production, Life Cycle Management (LCM), Industrial Symbiosis, and Circular Economy. As a result......-down and bottom-up approach, the framework establishes a relationship between LCE and the other concepts and positions them relative to the planetary boundaries and the concept of absolute environmental sustainability. (C) 2017 The Authors. Published by Elsevier B.V....
An integrated theory of causal scenarios and evidential arguments
Bex, F.J.
2015-01-01
In the process of proof alternative stories that explain 'what happened' in a case are tested using arguments based on evidence. Building on the author's earlier hybrid theory, this paper presents a formal theory that combines causal stories and evidential arguments, further integrating the
Job Satisfaction: A Possible Integration of Two Theories
Hazer, John T.
1976-01-01
The author proposes an integration of Herzberg's two-factor theory of job satisfaction (job satisfaction/dissatisfaction as two separate, parallel continua) and traditional theory (job satisfaction/dissatisfaction sharing the same continuum) and a rationale for deciding which motivation methods to use for employees with differeing levels of…
Integrable deformations of conformal theories and bootstrap trees
International Nuclear Information System (INIS)
Mussardo, G.
1991-01-01
I present recent results in the study of massive integrable quantum field theories in (1+1) dimensions considered as perturbed conformal minimal models. The on mass-shell properties of such theories, with a particular emphasis on the bootstrap principle, are investigated. (orig.)
Integration issues of information engineering based I-CASE tools
Kurbel, Karl; Schnieder, Thomas
1994-01-01
Problems and requirements regarding integration of methods and tools across phases of the software-development life cycle are discussed. Information engineering (IE) methodology and I-CASE (integrated CASE) tools supporting IE claim to have an integrated view across major stages of enterprise-wide information-system development: information strategy planning, business area analysis, system design, and construction. In the main part of this paper, two comprehensive I-CASE tools, ADW (Applicati...
Reverse Engineering in Data Integration Software
Directory of Open Access Journals (Sweden)
Vlad DIACONITA
2013-05-01
Full Text Available Integrated applications are complex solutions that help build better consolidated and standardized systems from existing (usually transactional systems. Integrated applications are complex solutions, whose complexity are determined by the economic processes they implement, the amount of data employed (millions of records grouped in hundreds of tables, databases, hundreds of GB and the number of users [11]. Oracle, once mainly known for his database and e-business solutions has been constantly expanding its product portfolio, providing solutions for SOA, BPA, Warehousing, Big Data and Cloud Computing. In this article I will review the facilities and the power of using a dedicated integration tool in an environment with multiple data sources and a target data mart.
Theories and Frameworks for Online Education: Seeking an Integrated Model
Picciano, Anthony G.
2017-01-01
This article examines theoretical frameworks and models that focus on the pedagogical aspects of online education. After a review of learning theory as applied to online education, a proposal for an integrated "Multimodal Model for Online Education" is provided based on pedagogical purpose. The model attempts to integrate the work of…
Visual feature integration theory: past, present, and future.
Quinlan, Philip T
2003-09-01
Visual feature integration theory was one of the most influential theories of visual information processing in the last quarter of the 20th century. This article provides an exposition of the theory and a review of the associated data. In the past much emphasis has been placed on how the theory explains performance in various visual search tasks. The relevant literature is discussed and alternative accounts are described. Amendments to the theory are also set out. Many other issues concerning internal processes and representations implicated by the theory are reviewed. The article closes with a synopsis of what has been learned from consideration of the theory, and it is concluded that some of the issues may remain intractable unless appropriate neuroscientific investigations are carried out.
Equivalence of some integrals of the radiation theory
International Nuclear Information System (INIS)
Chia, T.T.
1977-01-01
A definite integral which occurs in radiation theory is shown to be equal in value to another definite integral by evaluating the flux from a spherically symmetrical radiating sphere in two ways. As a corollary, an alternate proof of the invariance of the specific intensity of a ray in empty space along its path is presented. Furthermore, the equality of these two indefinite integrals leads to the conversion of members of a class of indefinite and definite integrals involving arbitrary functions of angle into other integrals. These transformations facilitate the calculation of some of these integrals which arise not only in the theory of radiation, but in other physical situations with spherical or axial symmetry - especially those in which inverse-square laws are involved. (Auth.)
Integrating mediation and moderation to advance theory development and testing.
Karazsia, Bryan T; Berlin, Kristoffer S; Armstrong, Bridget; Janicke, David M; Darling, Katherine E
2014-03-01
The concepts and associated analyses of mediation and moderation are important to the field of psychology. Although pediatric psychologists frequently incorporate mediation and moderation in their theories and empirical research, on few occasions have we integrated mediation and moderation. In this article, conceptual reasons for integrating mediation and moderation are offered. We illustrate a model that integrates mediation and moderation. In our illustration, the strength of an indirect or a mediating effect varied as a function of a moderating variable. Clinical implications of the integration of mediation and moderation are discussed, as is the potential of integrated models to advance research programs in pediatric psychology.
The postmodern issues and the theory of integration
Aurelian Petrus Plopeanu
2008-01-01
European Union continues the integration process as a postmodernist structure. From an institutional optics, the European Union integration is balancing between federalism and intergovernmentalism in the debate sphere. The relation between EU accession and the effects towards economic growth, future integration issues, the federalism and the constitutionalism of the European Union, the neo-neofunctionalism and the liberal inter-governmentalism theories and the welfare of the European Union in...
Adaptive integral equation methods in transport theory
International Nuclear Information System (INIS)
Kelley, C.T.
1992-01-01
In this paper, an adaptive multilevel algorithm for integral equations is described that has been developed with the Chandrasekhar H equation and its generalizations in mind. The algorithm maintains good performance when the Frechet derivative of the nonlinear map is singular at the solution, as happens in radiative transfer with conservative scattering and in critical neutron transport. Numerical examples that demonstrate the algorithm's effectiveness are presented
Theory and technology of rock excavation for civil engineering
Zou, Dingxiang
2017-01-01
This book summarizes the technical advances in recent decades and the various theories on rock excavation raised by scholars from different countries, including China and Russia. It not only focuses on rock blasting but also illustrates a number of non-blasting methods, such as mechanical excavation in detail. The book consists of 3 parts: Basic Knowledge, Surface Excavation and Underground Excavation. It presents a variety of technical methods and data from diverse sources in the book, making it a valuable theoretical and practical reference resource for engineers, researchers and postgraduates alike.
Exploration on teaching reform of theory curriculum for engineering specialties
Zhang, Yan; Shen, Wei-min; Shen, Chang-yu; Li, Chen-xia; Jing, Xu-feng; Lou, Jun; Shi, Yan; Jin, Shang-zhong
2017-08-01
The orientation of talents cultivation for local colleges is to train engineering application-oriented talents, so the exploration and practice on teaching reform of theory curriculum was carried out. We restructured the knowledge units basing on numerical solution problems, and chose the software to build algorithm models for improving the analytical and designed ability. Relying on micro video lessons platform, the teacher-student interaction was expanded from class to outside. Also, we programmed new experimental homework, which was suited for process evaluation. The new teaching mode has achieved good effect, and the students' application ability was significantly improved.
Towards an integrated theory of value, capital and money
Cavalieri, Duccio
2014-01-01
This is an analysis of the present state of the theory of capital. The paper contains a proposal to reformulate this theory in an ‘late-Marxian’ up-to-dated perspective. The central problem discussed is the integration of the theories of value and capital with those of money and finance. An augmented cost-of-production theory of value is advocated. Special attention is focused on the role of Marx’s ‘monetary expression of labour value’ (MEV), rediscovered and unduly modified by neo-Marxist...
Directory of Open Access Journals (Sweden)
Xiao-ping Bai
2013-01-01
Full Text Available Selecting construction schemes of the building engineering project is a complex multiobjective optimization decision process, in which many indexes need to be selected to find the optimum scheme. Aiming at this problem, this paper selects cost, progress, quality, and safety as the four first-order evaluation indexes, uses the quantitative method for the cost index, uses integrated qualitative and quantitative methodologies for progress, quality, and safety indexes, and integrates engineering economics, reliability theories, and information entropy theory to present a new evaluation method for building construction project. Combined with a practical case, this paper also presents detailed computing processes and steps, including selecting all order indexes, establishing the index matrix, computing score values of all order indexes, computing the synthesis score, sorting all selected schemes, and making analysis and decision. Presented method can offer valuable references for risk computing of building construction projects.
Bai, Xiao-ping; Zhang, Xi-wei
2013-01-01
Selecting construction schemes of the building engineering project is a complex multiobjective optimization decision process, in which many indexes need to be selected to find the optimum scheme. Aiming at this problem, this paper selects cost, progress, quality, and safety as the four first-order evaluation indexes, uses the quantitative method for the cost index, uses integrated qualitative and quantitative methodologies for progress, quality, and safety indexes, and integrates engineering economics, reliability theories, and information entropy theory to present a new evaluation method for building construction project. Combined with a practical case, this paper also presents detailed computing processes and steps, including selecting all order indexes, establishing the index matrix, computing score values of all order indexes, computing the synthesis score, sorting all selected schemes, and making analysis and decision. Presented method can offer valuable references for risk computing of building construction projects.
SUSY field theories in higher dimensions and integrable spin chains
International Nuclear Information System (INIS)
Gorsky, A.; Gukov, S.; Mironov, A.
1998-01-01
Five- and six-dimensional SUSY gauge theories, with one or two compactified directions, are discussed. The 5d theories with the matter hypermultiplets in the fundamental representation are associated with the twisted XXZ spin chain, while the group product case with bi-fundamental matter corresponds to the higher rank spin chains. The Riemann surfaces for 6d theories with fundamental matter and two compact directions are proposed to correspond to the XYZ spin chain based on the Sklyanin algebra. We also discuss the obtained results within the brane and geometrical engineering frameworks and explain the relation to the toric diagrams. (orig.)
Requirements Engineering for Software Integrity and Safety
Leveson, Nancy G.
2002-01-01
Requirements flaws are the most common cause of errors and software-related accidents in operational software. Most aerospace firms list requirements as one of their most important outstanding software development problems and all of the recent, NASA spacecraft losses related to software (including the highly publicized Mars Program failures) can be traced to requirements flaws. In light of these facts, it is surprising that relatively little research is devoted to requirements in contrast with other software engineering topics. The research proposed built on our previous work. including both criteria for determining whether a requirements specification is acceptably complete and a new approach to structuring system specifications called Intent Specifications. This grant was to fund basic research on how these ideas could be extended to leverage innovative approaches to the problems of (1) reducing the impact of changing requirements, (2) finding requirements specification flaws early through formal and informal analysis, and (3) avoiding common flaws entirely through appropriate requirements specification language design.
Fincher, Bridgette Ann
The purpose of this study was to describe the perceptions and approaches of 14 third-through-fifth grade Arkansan elementary teachers towards integrative engineering and engineering practices during 80 hours of integrated STEM professional development training in the summer and fall of 2014. This training was known as Project Flight. The purpose of the professional development was to learn integrated STEM content related to aviation and to write grade level curriculum units using Wiggins and McTighe's Understanding by Design curriculum framework. The current study builds upon on the original research. Using a mixed method exploratory, embedded QUAL[quan] case study design and a non-experimental convenience sample derived from original 20 participants of Project Flight, this research sought to answer the following question: Does professional development influence elementary teachers' perceptions of the curriculum and instruction of integrated STEM engineering and engineering practices in a 3-to-5 grade level setting? A series of six qualitative and one quantitative sub-questions informed the research of the mixed method question. Hermeneutic content analysis was applied to archival and current qualitative data sets while descriptive statistics, independent t-tests, and repeated measures ANOVA tests were performed on the quantitative data. Broad themes in the teachers' perceptions and understanding of the nature of integrated engineering and engineering practices emerged through triangulation. After the professional development and the teaching of the integrated STEM units, all 14 teachers sustained higher perceptions of personal self-efficacy in their understanding of Next Generation Science Standards (NGSS). The teachers gained understanding of engineering and engineering practices, excluding engineering habits of mind, throughout the professional development training and unit teaching. The research resulted in four major findings specific to elementary engineering
Reverse Engineering Camouflaged Sequential Integrated Circuits Without Scan Access
Massad, Mohamed El; Garg, Siddharth; Tripunitara, Mahesh
2017-01-01
Integrated circuit (IC) camouflaging is a promising technique to protect the design of a chip from reverse engineering. However, recent work has shown that even camouflaged ICs can be reverse engineered from the observed input/output behaviour of a chip using SAT solvers. However, these so-called SAT attacks have so far targeted only camouflaged combinational circuits. For camouflaged sequential circuits, the SAT attack requires that the internal state of the circuit is controllable and obser...
A Planning Approach of Engineering Characteristics Based on QFD-TRIZ Integrated
Liu, Shang; Shi, Dongyan; Zhang, Ying
Traditional QFD planning method compromises contradictions between engineering characteristics to achieve higher customer satisfaction. However, this compromise trade-off can not eliminate the contradictions existing among the engineering characteristics which limited the overall customer satisfaction. QFD (Quality function deployment) integrated with TRIZ (the Russian acronym of the Theory of Inventive Problem Solving) becomes hot research recently for TRIZ can be used to solve contradictions between engineering characteristics which construct the roof of HOQ (House of quality). But, the traditional QFD planning approach is not suitable for QFD integrated with TRIZ for that TRIZ requires emphasizing the contradictions between engineering characteristics at problem definition stage instead of compromising trade-off. So, a new planning approach based on QFD / TRIZ integration is proposed in this paper, which based on the consideration of the correlation matrix of engineering characteristics and customer satisfaction on the basis of cost. The proposed approach suggests that TRIZ should be applied to solve contradictions at the first step, and the correlation matrix of engineering characteristics should be amended at the second step, and at next step IFR (ideal final result) must be validated, then planning execute. An example is used to illustrate the proposed approach. The application indicated that higher customer satisfaction can be met and the contradictions between the characteristic parameters are eliminated.
Cylindrical integrated optical microresonators: modeling by 3-D vectorial coupled mode theory
Czech Academy of Sciences Publication Activity Database
Stoffer, R.; Hiremath, K. R.; Hammer, M.; Prkna, Ladislav; Čtyroký, Jiří
2005-01-01
Roč. 256, 1/3 (2005), s. 46-67 ISSN 0030-4018 R&D Projects: GA ČR(CZ) GA102/05/0987 Grant - others:European Commission(XE) IST-2000-28018 NAIS Institutional research plan: CEZ:AV0Z20670512 Keywords : integrated optics * optical waveguide theory * modelling Subject RIV: JA - Electronics ; Optoelectronics, Electrical Engineering Impact factor: 1.456, year: 2005
Integrating E-Commerce and Social Engineering Perspectives on Trust in Online Communication
Pfeiffer, Thomas; Kauer, Michaela; Bruder, Ralph
2012-01-01
Currently, interpersonal trust in computer-mediated communication is a research topic for e-commerce as well as usable security researchers. While the e-commerce researchers focus on gaining warranted trust, usable security researchers focus on preventing misplaced trust, in order to protect users from social engineering attacks. In this paper an approach to integrate findings and theories from both fields is proposed in order to create a complete model for predicti...
An integrative theory of prefrontal cortex function.
Miller, E K; Cohen, J D
2001-01-01
The prefrontal cortex has long been suspected to play an important role in cognitive control, in the ability to orchestrate thought and action in accordance with internal goals. Its neural basis, however, has remained a mystery. Here, we propose that cognitive control stems from the active maintenance of patterns of activity in the prefrontal cortex that represent goals and the means to achieve them. They provide bias signals to other brain structures whose net effect is to guide the flow of activity along neural pathways that establish the proper mappings between inputs, internal states, and outputs needed to perform a given task. We review neurophysiological, neurobiological, neuroimaging, and computational studies that support this theory and discuss its implications as well as further issues to be addressed
Quantum integrable models of field theory
International Nuclear Information System (INIS)
Faddeev, L.D.
1979-01-01
Fundamental features of the classical method of the inverse problem have been formulated in the form which is convenient for its quantum reformulation. Typical examples are studied which may help to formulate the quantum method of the inverse problem. Examples are considered for interaction with both attraction and repulsion at a final density. The sine-Gordon model and the XYZ model from the quantum theory of magnetics are examined in short. It is noted that all the achievements of the one-dimensional mathematical physics as applied to exactly solvable quantum models may be put to an extent within the framework of the quantum method of the inverse problem. Unsolved questions are enumerated and perspectives of applying the inverse problem method are shown
A new integrability theory for certain nonlinear physical problems
International Nuclear Information System (INIS)
Berger, M.S.
1993-01-01
A new mathematically sound integrability theory for certain nonlinear problems defined by ordinary or partial differential equations is defined. The new theory works in an arbitrary finite number of space dimensions. Moreover, if a system is integrable in the new sense described here, it has a remarkable stability property that distinguishes if from any previously known integrability ideas. The new theory proceeds by establishing a ''global normal form'' for the problem at hand. This normal form holds subject to canonical coordinate transformations, extending such classical ideas by using new nonlinear methods of infinite dimensional functional analysis. The global normal form in question is related to the mathematical theory of singularities of mappings of H. Whitney and R. Thom extended globally and form finite to infinite dimensions. Thus bifurcation phenomena are naturally included in the new integrability theory. Typical examples include the classically nonintegrable Riccati equation, certain non-Euclidean mean field theories, certain parabolic reaction diffusion equations and the hyperbolic nonlinear telegrapher's equation. (Author)
Sophistication and integration of plant engineering CAD-CAE systems
International Nuclear Information System (INIS)
Yoshinaga, Toshiaki; Hanyu, Masaharu; Ota, Yoshimi; Kobayashi, Yasuhiro.
1995-01-01
In respective departments in charge of basic planning, design, manufacture, inspection and construction of nuclear power plants, by the positive utilization of CAD/CAE system, efficient workings have been advanced. This time, the plant integrated CAE system wich heightens the function of these individual systems, and can make workings efficient and advanced by unifying and integrating them was developed. This system is composed of the newly developed application system and the data base system which enables the unified management of engineering data and high speed data conversion in addition to the CAD system for three-dimensional plant layout planning. On the basis of the rich experience and the proposal of improvement of designers by the application of the CAD system for three-dimensional plant layout planning to actual machines, the automation, speed increase and the visualization of input and output by graphical user interface (GUI) in the processing of respective applications were made feasible. As the advancement of plant CAE system, scenic engineering system, integrated layout CAE system, electric instrumentation design CAE system and construction planning CAE system are described. As for the integration of plant CAE systems, the integrated engineering data base, the combination of plant CAE systems, and the operation management in the dispersed environment of networks are reported. At present, Hitachi Ltd. exerts efforts for the construction of atomic energy product in formation integrated management system as the second stage of integration. (K.I.)
Engineering systems reliability, safety, and maintenance an integrated approach
Dhillon, B S
2017-01-01
Today, engineering systems are an important element of the world economy and each year billions of dollars are spent to develop, manufacture, operate, and maintain various types of engineering systems around the globe. Many of these systems are highly sophisticated and contain millions of parts. For example, a Boeing jumbo 747 is made up of approximately 4.5 million parts including fasteners. Needless to say, reliability, safety, and maintenance of systems such as this have become more important than ever before. Global competition and other factors are forcing manufacturers to produce highly reliable, safe, and maintainable engineering products. Therefore, there is a definite need for the reliability, safety, and maintenance professionals to work closely during design and other phases. Engineering Systems Reliability, Safety, and Maintenance: An Integrated Approach eliminates the need to consult many different and diverse sources in the hunt for the information required to design better engineering syste...
Buried waste integrated demonstration human engineered control station. Final report
Energy Technology Data Exchange (ETDEWEB)
1994-09-01
This document describes the Human Engineered Control Station (HECS) project activities including the conceptual designs. The purpose of the HECS is to enhance the effectiveness and efficiency of remote retrieval by providing an integrated remote control station. The HECS integrates human capabilities, limitations, and expectations into the design to reduce the potential for human error, provides an easy system to learn and operate, provides an increased productivity, and reduces the ultimate investment in training. The overall HECS consists of the technology interface stations, supporting engineering aids, platform (trailer), communications network (broadband system), and collision avoidance system.
Buried waste integrated demonstration human engineered control station. Final report
International Nuclear Information System (INIS)
1994-09-01
This document describes the Human Engineered Control Station (HECS) project activities including the conceptual designs. The purpose of the HECS is to enhance the effectiveness and efficiency of remote retrieval by providing an integrated remote control station. The HECS integrates human capabilities, limitations, and expectations into the design to reduce the potential for human error, provides an easy system to learn and operate, provides an increased productivity, and reduces the ultimate investment in training. The overall HECS consists of the technology interface stations, supporting engineering aids, platform (trailer), communications network (broadband system), and collision avoidance system
Constructal Theory Of Design In Engineering And Nature
Directory of Open Access Journals (Sweden)
Adrian Bejan
2005-02-01
Full Text Available This is a brief introduction to an engineering theory on the origin and generation of geometric form in all flow systems: the animate, the inanimate and the engineered. The theory is named constructal, and is based on the thought that it is natural for currents to construct for themselves in time paths of greater flow access. It is shown that this process of flow path optimization can be reasoned on the basis of principle: the maximization of global performance subject to finite-size constraints. One example is the generation of tree-shaped flow patterns, as paths of least resistance between one point (source, sink and an infinity of points (area, volume, as in the circulatory, respiratory and nervous systems. An other is the generation of regular spacings in heat generating volumes, such as swarms of honeybees. The optimized tree-flow geometries account for allometric laws, e. g., the relationship between the total tube contact area and the body size, the proportionality between metabolic rate and body size raised to the power 3/4, the proportionality between breathing and heartbeating times and body size raised to the power 1/4, and the proportionality between the cruising speed of flying bodies (insects, birds, airplanes and body mass raised to the power 1/6. The optimized flow structures constitute robust designs, and robustness improves as the complexity of the system increases. Flow architectures that are more efficient look more natural.
Attachment Theory and Theory of Planned Behavior: An Integrative Model Predicting Underage Drinking
Lac, Andrew; Crano, William D.; Berger, Dale E.; Alvaro, Eusebio M.
2013-01-01
Research indicates that peer and maternal bonds play important but sometimes contrasting roles in the outcomes of children. Less is known about attachment bonds to these 2 reference groups in young adults. Using a sample of 351 participants (18 to 20 years of age), the research integrated two theoretical traditions: attachment theory and theory of…
Youse, Keith Edward
2012-01-01
The current study examines predictors of math achievement and college graduation by integrating social learning theory and expectancy-value theory. Data came from a nationally-representative longitudinal database tracking 12,144 students over twelve years from 8th grade forward. Models for math achievement and college graduation were tested…
Integrated modelling of near field and engineered barrier system processes
International Nuclear Information System (INIS)
Lamont, A.; Gansemer, J.
1994-01-01
The Yucca Mountain Integrating Model (YMIM) is an integrated model of the Engineered barrier System has been developed to assist project managers at LLNL in identifying areas where research emphasis should be placed. The model was designed to be highly modular so that a model of an individual process could be easily modified or replaced without interfering with the models of other processes. The modules modelling container failure and the dissolution of nuclides include particularly detailed, temperature dependent models of their corresponding processes
Engineering integrated photonics for heralded quantum gates.
Meany, Thomas; Biggerstaff, Devon N; Broome, Matthew A; Fedrizzi, Alessandro; Delanty, Michael; Steel, M J; Gilchrist, Alexei; Marshall, Graham D; White, Andrew G; Withford, Michael J
2016-06-10
Scaling up linear-optics quantum computing will require multi-photon gates which are compact, phase-stable, exhibit excellent quantum interference, and have success heralded by the detection of ancillary photons. We investigate the design, fabrication and characterisation of the optimal known gate scheme which meets these requirements: the Knill controlled-Z gate, implemented in integrated laser-written waveguide arrays. We show device performance to be less sensitive to phase variations in the circuit than to small deviations in the coupler reflectivity, which are expected given the tolerance values of the fabrication method. The mode fidelity is also shown to be less sensitive to reflectivity and phase errors than the process fidelity. Our best device achieves a fidelity of 0.931 ± 0.001 with the ideal 4 × 4 unitary circuit and a process fidelity of 0.680 ± 0.005 with the ideal computational-basis process.
Engineering integrated photonics for heralded quantum gates
Meany, Thomas; Biggerstaff, Devon N.; Broome, Matthew A.; Fedrizzi, Alessandro; Delanty, Michael; Steel, M. J.; Gilchrist, Alexei; Marshall, Graham D.; White, Andrew G.; Withford, Michael J.
2016-06-01
Scaling up linear-optics quantum computing will require multi-photon gates which are compact, phase-stable, exhibit excellent quantum interference, and have success heralded by the detection of ancillary photons. We investigate the design, fabrication and characterisation of the optimal known gate scheme which meets these requirements: the Knill controlled-Z gate, implemented in integrated laser-written waveguide arrays. We show device performance to be less sensitive to phase variations in the circuit than to small deviations in the coupler reflectivity, which are expected given the tolerance values of the fabrication method. The mode fidelity is also shown to be less sensitive to reflectivity and phase errors than the process fidelity. Our best device achieves a fidelity of 0.931 ± 0.001 with the ideal 4 × 4 unitary circuit and a process fidelity of 0.680 ± 0.005 with the ideal computational-basis process.
Chan, Heng Choon Oliver; Heide, Kathleen M; Beauregard, Eric
2011-04-01
Despite the great interest in the study of sexual homicide, little is known about the processes involved in an individual's becoming motivated to sexually kill, deciding to sexually kill, and acting on that desire, intention, and opportunity. To date, no comprehensive model of sexual murdering from the offending perspective has been proposed in the criminological literature. This article incorporates the works of Akers and Cohen and Felson regarding their social learning theory and routine activities theory, respectively, to construct an integrated conceptual offending framework in sexual homicide. This integrated model produces a stronger and more comprehensive explanation of sexual murder than any single theory currently available.
Abelian Chern endash Simons theory. II. A functional integral approach
International Nuclear Information System (INIS)
Manoliu, M.
1998-01-01
Following Witten, [Commun. Math. Phys. 21, 351 endash 399 (1989)] we approach the Abelian quantum Chern endash Simons (CS) gauge theory from a Feynman functional integral point of view. We show that for 3-manifolds with and without a boundary the formal functional integral definitions lead to mathematically proper expressions that agree with the results from the rigorous construction [J. Math. Phys. 39, 170 endash 206 (1998)] of the Abelian CS topological quantum field theory via geometric quantization. copyright 1998 American Institute of Physics
The integrable structure of nonrational conformal field theory
Energy Technology Data Exchange (ETDEWEB)
Bytsko, A. [Steklov Mathematics Institute, St. Petersburg (Russian Federation); Teschner, J. [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany)
2009-02-15
Using the example of Liouville theory, we show how the separation into left- and rightmoving degrees of freedom of a nonrational conformal field theory can be made explicit in terms of its integrable structure. The key observation is that there exist separate Baxter Q-operators for left- and right-moving degrees of freedom. Combining a study of the analytic properties of the Q-operators with Sklyanin's Separation of Variables Method leads to a complete characterization of the spectrum. Taking the continuum limit allows us in particular to rederive the Liouville reflection amplitude using only the integrable structure. (orig.)
Village, Judy; Searcy, Cory; Salustri, Filipo; Patrick Neumann, W
2015-01-01
The 'design for human factors' grounded theory explains 'how' human factors (HF) went from a reactive, after-injury programme in safety, to being proactively integrated into each step of the production design process. In this longitudinal case study collaboration with engineers and HF Specialists in a large electronics manufacturer, qualitative data (e.g. meetings, interviews, observations and reflections) were analysed using a grounded theory methodology. The central tenet in the theory is that when HF Specialists acclimated to the engineering process, language and tools, and strategically aligned HF to the design and business goals of the organisation, HF became a means to improve business performance. This led to engineers 'pulling' HF Specialists onto their team. HF targets were adopted into engineering tools to communicate HF concerns quantitatively, drive continuous improvement, visibly demonstrate change and lead to benchmarking. Senior management held engineers accountable for HF as a key performance indicator, thus integrating HF into the production design process. Practitioner Summary: Research and practice lack explanations about how HF can be integrated early in design of production systems. This three-year case study and the theory derived demonstrate how ergonomists changed their focus to align with design and business goals to integrate HF into the design process.
Integrating standardization into engineering education: the case of forerunner Korea
D.G. Choi (Dong Geun); H.J. de Vries (Henk)
2013-01-01
textabstractThe Republic of Korea is a forerunner in integrating the topic of standardization into engineering education at the academic level. This study investigates developments and evolutions in the planning and operating of the University Education Promotion on Standardization (UEPS) in Korea.
Optimal control for integrated emission management in diesel engines
Donkers, M.C.F.; van Schijndel, J.; Heemels, W.P.M.H.; Willems, F.
2017-01-01
Integrated Emission Management (IEM) is a supervisory control strategy that minimises operational costs (consisting of fuel and AdBlue) for diesel engines with an aftertreatment system, while satisfying emission constraints imposed by legislation. In most work on IEM, a suboptimal heuristic
Optimal control for integrated emission management in diesel engines
Donkers, M.C.F.; Schijndel, J. van; Heemels, W.P.M.H.; Willems, F.P.T.
2016-01-01
Integrated Emission Management (IEM) is a supervisory control strategy that minimises operational costs (consisting of fuel and AdBlue) for diesel engines with an aftertreatment system, while satisfying emission constraints imposed by legislation. In most work on IEM, a suboptimal heuristic
Dynamic programming for Integrated Emission Management in diesel engines
Schijndel, J. van; Donkers, M.C.F.; Willems, F.P.T.; Heemels, W.P.M.H.
2014-01-01
Integrated Emission Management (IEM) is a supervisory control strategy that aims at minimizing the operational costs of diesel engines with an aftertreatment system, while satisfying emission constraints imposed by legislation. In previous work on IEM, a suboptimal real-time implementable solution
Integrating computer programs for engineering analysis and design
Wilhite, A. W.; Crisp, V. K.; Johnson, S. C.
1983-01-01
The design of a third-generation system for integrating computer programs for engineering and design has been developed for the Aerospace Vehicle Interactive Design (AVID) system. This system consists of an engineering data management system, program interface software, a user interface, and a geometry system. A relational information system (ARIS) was developed specifically for the computer-aided engineering system. It is used for a repository of design data that are communicated between analysis programs, for a dictionary that describes these design data, for a directory that describes the analysis programs, and for other system functions. A method is described for interfacing independent analysis programs into a loosely-coupled design system. This method emphasizes an interactive extension of analysis techniques and manipulation of design data. Also, integrity mechanisms exist to maintain database correctness for multidisciplinary design tasks by an individual or a team of specialists. Finally, a prototype user interface program has been developed to aid in system utilization.
On integrable c < 1 open-closed string theory
International Nuclear Information System (INIS)
Johnson, C.V.
1994-01-01
The integrable structure of open-closed string theories in the (p, q) conformal minimal model backgrounds is presented. The relation between the τ-function of the closed string theory and that of the open-closed string theory is uncovered. The resulting description of the open-closed string theory is shown to fit very naturally into the framework of the sl(q, C) KdV hierarchies. In particular, the twisted bosons which underlie and organise the structure of the closed string theory play a similar role here and may be employed to derive loop equations and correlation function recursion relations for the open-closed strings in a simple way. (orig.)
Reducing acquisition risk through integrated systems of systems engineering
Gross, Andrew; Hobson, Brian; Bouwens, Christina
2016-05-01
In the fall of 2015, the Joint Staff J7 (JS J7) sponsored the Bold Quest (BQ) 15.2 event and conducted planning and coordination to combine this event into a joint event with the Army Warfighting Assessment (AWA) 16.1 sponsored by the U.S. Army. This multipurpose event combined a Joint/Coalition exercise (JS J7) with components of testing, training, and experimentation required by the Army. In support of Assistant Secretary of the Army for Acquisition, Logistics, and Technology (ASA(ALT)) System of Systems Engineering and Integration (SoSE&I), Always On-On Demand (AO-OD) used a system of systems (SoS) engineering approach to develop a live, virtual, constructive distributed environment (LVC-DE) to support risk mitigation utilizing this complex and challenging exercise environment for a system preparing to enter limited user test (LUT). AO-OD executed a requirements-based SoS engineering process starting with user needs and objectives from Army Integrated Air and Missile Defense (AIAMD), Patriot units, Coalition Intelligence, Surveillance and Reconnaissance (CISR), Focused End State 4 (FES4) Mission Command (MC) Interoperability with Unified Action Partners (UAP), and Mission Partner Environment (MPE) Integration and Training, Tactics and Procedures (TTP) assessment. The SoS engineering process decomposed the common operational, analytical, and technical requirements, while utilizing the Institute of Electrical and Electronics Engineers (IEEE) Distributed Simulation Engineering and Execution Process (DSEEP) to provide structured accountability for the integration and execution of the AO-OD LVC-DE. As a result of this process implementation, AO-OD successfully planned for, prepared, and executed a distributed simulation support environment that responsively satisfied user needs and objectives, demonstrating the viability of an LVC-DE environment to support multiple user objectives and support risk mitigation activities for systems in the acquisition process.
Integrating chemical engineering fundamentals in the capstone process design project
DEFF Research Database (Denmark)
von Solms, Nicolas; Woodley, John; Johnsson, Jan Erik
2010-01-01
Reaction Engineering. In order to incorporate reactor design into process design in a meaningful way, the teachers of the respective courses need to collaborate (Standard 9 – Enhancement of Faculty CDIO skills). The students also see that different components of the chemical engineering curriculum relate......All B.Eng. courses offered at the Technical University of Denmark (DTU) must now follow CDIO standards. The final “capstone” course in the B.Eng. education is Process Design, which for many years has been typical of chemical engineering curricula worldwide. The course at DTU typically has about 30...... of the CDIO standards – especially standard 3 – Integrated Curriculum - means that the course projects must draw on competences provided in other subjects which the students are taking in parallel with Process Design – specifically Process Control and Reaction Engineering. In each semester of the B...
Predicted performance of an integrated modular engine system
Binder, Michael; Felder, James L.
1993-01-01
Space vehicle propulsion systems are traditionally comprised of a cluster of discrete engines, each with its own set of turbopumps, valves, and a thrust chamber. The Integrated Modular Engine (IME) concept proposes a vehicle propulsion system comprised of multiple turbopumps, valves, and thrust chambers which are all interconnected. The IME concept has potential advantages in fault-tolerance, weight, and operational efficiency compared with the traditional clustered engine configuration. The purpose of this study is to examine the steady-state performance of an IME system with various components removed to simulate fault conditions. An IME configuration for a hydrogen/oxygen expander cycle propulsion system with four sets of turbopumps and eight thrust chambers has been modeled using the Rocket Engine Transient Simulator (ROCETS) program. The nominal steady-state performance is simulated, as well as turbopump thrust chamber and duct failures. The impact of component failures on system performance is discussed in the context of the system's fault tolerant capabilities.
The Theory of Planned Behaviour Applied to Search Engines as a Learning Tool
Liaw, Shu-Sheng
2004-01-01
Search engines have been developed for helping learners to seek online information. Based on theory of planned behaviour approach, this research intends to investigate the behaviour of using search engines as a learning tool. After factor analysis, the results suggest that perceived satisfaction of search engine, search engines as an information…
First Canadian workshop on engineering structural integrity : CWESI. Proceedings
International Nuclear Information System (INIS)
2002-01-01
The First Canadian Workshop on Engineering Structural Integrity (CWESI) was held on October 16 and 17, 2002, in Toronto, Canada. The purpose of the Workshop was to review strategies for ESI in a number of key industries, and to attempt to plot a course for co-operation in ESI activities and implementation of ESI initiatives in Canadian industry, together with support for appropriate educational, research and development activities. The Workshop consisted of presentations by speakers from a number of industries. Presentations focused on in-service experience under service conditions related to the Canadian environment. This Workshop was attended by practising structural integrity engineers, managers with the responsibility for delivery of safe and reliable operation, and researchers in the structural integrity area
Integrated Tools for Future Distributed Engine Control Technologies
Culley, Dennis; Thomas, Randy; Saus, Joseph
2013-01-01
Turbine engines are highly complex mechanical systems that are becoming increasingly dependent on control technologies to achieve system performance and safety metrics. However, the contribution of controls to these measurable system objectives is difficult to quantify due to a lack of tools capable of informing the decision makers. This shortcoming hinders technology insertion in the engine design process. NASA Glenn Research Center is developing a Hardware-inthe- Loop (HIL) platform and analysis tool set that will serve as a focal point for new control technologies, especially those related to the hardware development and integration of distributed engine control. The HIL platform is intended to enable rapid and detailed evaluation of new engine control applications, from conceptual design through hardware development, in order to quantify their impact on engine systems. This paper discusses the complex interactions of the control system, within the context of the larger engine system, and how new control technologies are changing that paradigm. The conceptual design of the new HIL platform is then described as a primary tool to address those interactions and how it will help feed the insertion of new technologies into future engine systems.
Basic stages in the development of the theory of Ramjet Engines (RJE)
Merkulov, I. A.
1977-01-01
Basic periods in the history of the development of ramjet engine theory are cited. The periods include the first experimental tests as well as the development of basic ideas and theoretical development of the cosmic ramjet engine.
Fractional derivatives for physicists and engineers background and theory
Uchaikin, Vladimir V
2013-01-01
The first derivative of a particle coordinate means its velocity, the second means its acceleration, but what does a fractional order derivative mean? Where does it come from, how does it work, where does it lead to? The two-volume book written on high didactic level answers these questions. Fractional Derivatives for Physicists and Engineers— The first volume contains a clear introduction into such a modern branch of analysis as the fractional calculus. The second develops a wide panorama of applications of the fractional calculus to various physical problems. This book recovers new perspectives in front of the reader dealing with turbulence and semiconductors, plasma and thermodynamics, mechanics and quantum optics, nanophysics and astrophysics. The book is addressed to students, engineers and physicists, specialists in theory of probability and statistics, in mathematical modeling and numerical simulations, to everybody who doesn't wish to stay apart from the new mathematical methods becoming more and ...
Real analysis measure theory, integration, and Hilbert spaces
Stein, Elias M
2005-01-01
Real Analysis is the third volume in the Princeton Lectures in Analysis, a series of four textbooks that aim to present, in an integrated manner, the core areas of analysis. Here the focus is on the development of measure and integration theory, differentiation and integration, Hilbert spaces, and Hausdorff measure and fractals. This book reflects the objective of the series as a whole: to make plain the organic unity that exists between the various parts of the subject, and to illustrate the wide applicability of ideas of analysis to other fields of mathematics and science. After
An integral for second-order multiple scattering perturbation theory
International Nuclear Information System (INIS)
Hoffman, G.G.
1997-01-01
This paper presents the closed form evaluation of a six-dimensional integral. The integral arises in the application to many-electron systems of a multiple scattering perturbation expansion at second order when formulated in fourier space. The resulting function can be used for the calculation of both the electron density and the effective one-electron potential in an SCF calculations. The closed form expression derived here greatly facilitates these calculations. In addition, the evaluated integral can be used for the computation of second-order corrections to the open-quotes optimized Thomas-Fermi theory.close quotes 10 refs., 2 figs
An Integrated Theory of Whole Number and Fractions Development
Siegler, Robert S.; Thompson, Clarissa A.; Schneider, Michael
2011-01-01
This article proposes an integrated theory of acquisition of knowledge about whole numbers and fractions. Although whole numbers and fractions differ in many ways that influence their development, an important commonality is the centrality of knowledge of numerical magnitudes in overall understanding. The present findings with 11- and 13-year-olds…
The quantum double in integrable quantum field theory
International Nuclear Information System (INIS)
Bernard, D.; LeClair, A.
1993-01-01
Various aspects of recent works on affine quantum group symmetry of integrable 2D quantum field theory are reviewed and further clarified. A geometrical meaning is given to the quantum double, and other properties of quantum groups. The S-matrix is identified with the universal R-matrix. Multiplicative presentations of the yangian double are analyzed. (orig.)
Potential theory, path integrals and the Laplacian of the indicator
R.-J. Lange (Rutger-Jan)
2012-01-01
markdownabstractThis paper links the field of potential theory — i.e. the Dirichlet and Neumann problems for the heat and Laplace equation — to that of the Feynman path integral, by postulating the some seemingly ill-defined potential. The Laplacian of the indicator can be interpreted using the
Institutional economics and economic organisation theory: An integrated approach
Slangen, L.H.G.; Loucks, L.A.; Slangen, A.H.L.
2008-01-01
This publication presents one of the first attempts to integrate two emerging bodies of economic research: institutional economics and organizational theory. It begins within the framework of neoclassical economics, and then extends the boundaries of this framework to offer answers to questions that
Institutional economics and economic organisation theory : an integrated approach
Slangen, L.H.G.; Loucks, L.; Slangen, A.H.L.
2008-01-01
This publication presents one of the first attempts to integrate two emerging bodies of economic research: institutional economics and organizational theory. It begins within the framework of neoclassical economics, and then extends the boundaries of this framework to offer answers to questions that
Classically integrable boundary conditions for affine Toda field theories
International Nuclear Information System (INIS)
Bowcock, P.; Corrigan, E.; Dorey, P.E.; Rietdijk, R.H.
1995-01-01
Boundary conditions compatible with classical integrability are studied both directly, using an approach based on the explicit construction of conserved quantities, and indirectly by first developing a generalisation of the Lax pair idea. The latter approach is closer to the spirit of earlier work by Sklyanin and yields a complete set of conjectures for permissible boundary conditions for any affine Toda field theory. (orig.)
Integrating Social Class into Vocational Psychology: Theory and Practice Implications
Diemer, Matthew A.; Ali, Saba Rasheed
2009-01-01
Although social class plays a salient and significant role in career development and occupational attainment, social class is underrepresented in vocational psychology theory, scholarship, and practice. Vocational psychologists are in a unique position to meet the career development needs of persons from all social classes by integrating a fuller…
Threaded Cognition: An Integrated Theory of Concurrent Multitasking
Salvucci, Dario D.; Taatgen, Niels A.
2008-01-01
The authors propose the idea of threaded cognition, an integrated theory of concurrent multitasking--that is, performing 2 or more tasks at once. Threaded cognition posits that streams of thought can be represented as threads of processing coordinated by a serial procedural resource and executed across other available resources (e.g., perceptual…
Threaded cognition : An integrated theory of concurrent multitasking
Salvucci, Dario D.; Taatgen, Niels A.
The authors propose the idea of threaded cognition, an integrated theory of concurrent multitasking-that is, performing 2 or more tasks at once. Threaded cognition posits that streams of thought can be represented as threads of processing coordinated by a serial procedural resource and executed
Solution of quantum integrable systems from quiver gauge theories
Energy Technology Data Exchange (ETDEWEB)
Dorey, Nick [Department of Applied Mathematics and Theoretical Physics, University of Cambridge,Cambridge (United Kingdom); Zhao, Peng [Simons Center for Geometry and Physics, Stony Brook University,Stony Brook (United States)
2017-02-23
We construct new integrable systems describing particles with internal spin from four-dimensional N = 2 quiver gauge theories. The models can be quantized and solved exactly using the quantum inverse scattering method and also using the Bethe/Gauge correspondence.
Prejudice towards Muslims in The Netherlands : Testing integrated threat theory
Velasco González, Karina; Verkuyten, Maykel; Weesie, Jeroen; Poppe, Edwin
2008-01-01
This study uses integrated threat theory to examine Dutch adolescents’ (N ¼ 1; 187) prejudice towards Muslim minorities. One out of two participants was found to have negative feelings towards Muslims. Perceived symbolic and realistic threat and negative stereotypes were examined as mediators
Osman, Sharifah; Mohammad, Shahrin; Abu, Mohd Salleh
2015-05-01
Mathematics and engineering are inexorably and significantly linked and essentially required in analyzing and accessing thought to make good judgment when dealing in complex and varied engineering problems. A study in the current engineering education curriculum to explore how the critical thinking and mathematical thinking relates to one another, is therefore timely crucial. Unfortunately, there is not much information available explicating about the link. This paper aims to report findings of a critical review as well as to provide brief description of an on-going research aimed to investigate the dispositions of critical thinking and the relationship and integration between critical thinking and mathematical thinking during the execution of civil engineering tasks. The first part of the paper reports an in-depth review on these matters based on rather limited resources. The review showed a considerable form of congruency between these two perspectives of thinking, with some prevalent trends of engineering workplace tasks, problems and challenges. The second part describes an on-going research to be conducted by the researcher to investigate rigorously the relationship and integration between these two types of thinking within the perspective of civil engineering tasks. A reasonably close non-participant observations and semi-structured interviews will be executed for the pilot and main stages of the study. The data will be analyzed using constant comparative analysis in which the grounded theory methodology will be adopted. The findings will serve as a useful grounding for constructing a substantive theory revealing the integral relationship between critical thinking and mathematical thinking in the real civil engineering practice context. The substantive theory, from an angle of view, is expected to contribute some additional useful information to the engineering program outcomes and engineering education instructions, aligns with the expectations of
Towards an Integral Critical Theory of the Present Age
Directory of Open Access Journals (Sweden)
Martin Beck Matuštík
2007-12-01
Full Text Available A new model of a critical theory that is integral is introduced. It adds a seventh stage to a six-stage model of critical theory. Building on the model’s predecessors, from Kant, Hegel, and Marx to Habermas and Wilber, this proposal is a three-pronged model of material, socio-political, and spiritual critique of the present age. Each dimension is non-reducible to the other. The current model echoes the attempts to bridge social and existential perspectives by early Marcuse and Sartre, and the author’s prior work that did this for Habermas and Kierkegaard. This model of an integral critical theory introduces a self-transformational axis, the integer or witness-self, complementing transversally the vertical stages and horizontal states of consciousness.
Towards an Integral Critical Theory of the Present Age
Directory of Open Access Journals (Sweden)
Martin Beck Matuštík
2007-12-01
Full Text Available A new model of a critical theory that is integral is introduced. It adds a seventhstage to a six-stage model of critical theory. Building on the model’s predecessors, fromKant, Hegel, and Marx to Habermas and Wilber, this proposal is a three-pronged modelof material, socio-political, and spiritual critique of the present age. Each dimension isnon-reducible to the other. The current model echoes the attempts to bridge social andexistential perspectives by early Marcuse and Sartre, and the author’s prior work that didthis for Habermas and Kierkegaard. This model of an integral critical theory introduces aself-transformational axis, the integer or witness-self, complementing transversally thevertical stages and horizontal states of consciousness.
From integrability to conformal symmetry: Bosonic superconformal Toda theories
International Nuclear Information System (INIS)
Bo-Yu Hou; Liu Chao
1993-01-01
In this paper the authors study the conformal integrable models obtained from conformal reductions of WZNW theory associated with second order constraints. These models are called bosonic superconformal Toda models due to their conformal spectra and their resemblance to the usual Toda theories. From the reduction procedure they get the equations of motion and the linearized Lax equations in a generic Z gradation of the underlying Lie algebra. Then, in the special case of principal gradation, they derive the classical r matrix, fundamental Poisson relation, exchange algebra of chiral operators and find out the classical vertex operators. The result shows that their model is very similar to the ordinary Toda theories in that one can obtain various conformal properties of the model from its integrability
Category Theory as a Formal Mathematical Foundation for Model-Based Systems Engineering
Mabrok, Mohamed; Ryan, Michael J.
2017-01-01
In this paper, we introduce Category Theory as a formal foundation for model-based systems engineering. A generalised view of the system based on category theory is presented, where any system can be considered as a category. The objects
Integrated Theory of Health Behavior Change: background and intervention development.
Ryan, Polly
2009-01-01
An essential characteristic of advanced practice nurses is the use of theory in practice. Clinical nurse specialists apply theory in providing or directing patient care, in their work as consultants to staff nurses, and as leaders influencing and facilitating system change. Knowledge of technology and pharmacology has far outpaced knowledge of how to facilitate health behavior change, and new theories are needed to better understand how practitioners can facilitate health behavior change. In this article, the Integrated Theory of Health Behavior Change is described, and an example of its use as foundation to intervention development is presented. The Integrated Theory of Health Behavior Change suggests that health behavior change can be enhanced by fostering knowledge and beliefs, increasing self-regulation skills and abilities, and enhancing social facilitation. Engagement in self-management behaviors is seen as the proximal outcome influencing the long-term distal outcome of improved health status. Person-centered interventions are directed to increasing knowledge and beliefs, self-regulation skills and abilities, and social facilitation. Using a theoretical framework improves clinical nurse specialist practice by focusing assessments, directing the use of best-practice interventions, and improving patient outcomes. Using theory fosters improved communication with other disciplines and enhances the management of complex clinical conditions by providing holistic, comprehensive care.
Contribution to the study of conformal theories and integrable models
International Nuclear Information System (INIS)
Sochen, N.
1992-05-01
The purpose of this thesis is the 2-D physics study. The main tool is the conformal field theory with Kac-Moody and W algebra. This theory describes the 2-D models that have translation, rotation and dilatation symmetries, at their critical point. The expanded conformal theories describe models that have a larger symmetry than conformal symmetry. After a review of conformal theory methods, the author effects a detailed study of singular vector form in sl(2) affine algebra. With this important form, correlation functions can be calculated. The classical W algebra is studied and the relations between classical W algebra and quantum W algebra are specified. Bosonization method is presented and sl(2)/sl(2) topological model, studied. Partition function bosonization of different models is described. A program of rational theory classification is described linking rational conformal theories and spin integrable models, and interesting relations between Boltzmann weights of different models have been found. With these relations, the integrability of models by a direct calculation of their Boltzmann weights is proved
An engineering approach to an integrated value proposition design framework
Directory of Open Access Journals (Sweden)
Van Der Merwe, Carmen
2015-05-01
Full Text Available Numerous problems with product quality and time-to-market launches can be traced back to how the product lifecycle process is managed within the organisation. This article provides insight into how an integrated value proposition design framework shifts product lifecycle management from a product-centric view to a customer-centric view, through the use of good engineering practices as found in the systems engineering discipline. Combining this with methods and tools such as the Refined Kano model, Blue Ocean strategy, and the Generalised Bass model enables the organisation to enhance product and service quality while reducing the time-to-market for new value proposition launches.
The Need for Integrated Approaches in Metabolic Engineering
Energy Technology Data Exchange (ETDEWEB)
Lechner, Anna; Brunk, Elizabeth; Keasling, Jay D.
2016-08-15
This review highlights state-of-the-art procedures for heterologous small-molecule biosynthesis, the associated bottlenecks, and new strategies that have the potential to accelerate future accomplishments in metabolic engineering. We emphasize that a combination of different approaches over multiple time and size scales must b e considered for successful pathway engineering in a heterologous host. We have classified these optimization procedures based on the "system" that is being manipulated: transcriptome, translatome, proteome, or reactome. By bridging multiple disciplines, including molecular biology, biochemistry, biophysics, and computational sciences, we can create an integral framework for the discovery and implementation of novel biosynthetic production routes.
Conformal field theories, Coulomb gas picture and integrable models
International Nuclear Information System (INIS)
Zuber, J.B.
1988-01-01
The aim of the study is to present the links between some results of conformal field theory, the conventional Coulomb gas picture in statistical mechanics and the approach of integrable models. It is shown that families of conformal theories, related by the coset construction to the SU(2) Kac-Moody algebra, may be regarded as obtained from some free field, and modified by the coupling of its winding numbers to floating charges. This representation reflects the procedure of restriction of the corresponding integrable lattice models. The work may be generalized to models based on the coset construction with higher rank algebras. The corresponding integrable models are identified. In the conformal field description, generalized parafermions appear, and are coupled to free fields living on a higher-dimensional torus. The analysis is not as exhaustive as in the SU(2) case: all the various restrictions have not been identified, nor the modular invariants completely classified
van Rosmalen, Lenny; van der Horst, Frank C P; van der Veer, René
2016-02-01
John Bowlby is generally regarded as the founder of attachment theory, with the help of Mary Ainsworth. Through her Uganda and Baltimore studies Ainsworth provided empirical evidence for attachment theory, and she contributed the notion of the secure base and exploratory behavior, the Strange Situation Procedure and its classification system, and the notion of maternal sensitivity. On closer scrutiny, many of these contributions appear to be heavily influenced by William Blatz and his security theory. Even though Blatz's influence on Ainsworth has been generally acknowledged, this article, partly based on understudied correspondence from several personal archives, is the first to show which specific parts of attachment theory can be traced back directly to Blatz and his security theory. When Ainsworth started working with Bowlby in the 1950s, around the time he turned to evolutionary theory for an explanation of his findings, she integrated much of Blatzian security theory into Bowlby's theory in the making and used her theoretical and practical experience to enrich attachment theory. Even though Blatz is hardly mentioned nowadays, several of his ideas live on in attachment theory. (c) 2016 APA, all rights reserved).
Quadrature theory the theory of numerical integration on a compact interval
Brass, Helmut
2011-01-01
Every book on numerical analysis covers methods for the approximate calculation of definite integrals. The authors of this book provide a complementary treatment of the topic by presenting a coherent theory of quadrature methods that encompasses many deep and elegant results as well as a large number of interesting (solved and open) problems. The inclusion of the word "theory" in the title highlights the authors' emphasis on analytical questions, such as the existence and structure of quadrature methods and selection criteria based on strict error bounds for quadrature rules. Systematic analyses of this kind rely on certain properties of the integrand, called "co-observations," which form the central organizing principle for the authors' theory, and distinguish their book from other texts on numerical integration. A wide variety of co-observations are examined, as a detailed understanding of these is useful for solving problems in practical contexts. While quadrature theory is often viewed as a branch of nume...
Non-integrable quantum field theories as perturbations of certain integrable models
International Nuclear Information System (INIS)
Delfino, G.; Simonetti, P.
1996-03-01
We approach the study of non-integrable models of two-dimensional quantum field theory as perturbations of the integrable ones. By exploiting the knowledge of the exact S-matrix and Form Factors of the integrable field theories we obtain the first order corrections to the mass ratios, the vacuum energy density and the S-matrix of the non-integrable theories. As interesting applications of the formalism, we study the scaling region of the Ising model in an external magnetic field at T ∼ T c and the scaling region around the minimal model M 2 , τ . For these models, a remarkable agreement is observed between the theoretical predictions and the data extracted by a numerical diagonalization of their Hamiltonian. (author). 41 refs, 9 figs, 1 tab
INVOLVING STUDENTS IN RESEARCH AS A FORM OF INTEGRATION OF ENGINEERING WITH MATHEMATICAL EDUCATION
Directory of Open Access Journals (Sweden)
Viktor M. Fedoseyev
2016-03-01
Full Text Available Introduction: questions of integration of mathematical with engineering training in educational process of higher education institution are explored. The existing technologies of the integrated training are analyzed, and the project-oriented direction is distinguished. Research involving students as an organisational and methodical form of training bachelors of the technical speciali sations is discussed. Materials and Methods: results of article are based on researches of tendencies of development of technical and mathematical education, works on the theory and methodology of pedagogical integration, methodology of mathematics and technical science. Methods of historical and pedagogical research, analytical, a method of mathematical modeling were used. Results: the main content of the paper is to make discussion of experience in developing and using integrated educational tasks in real educational process. Discussion is based on a specific technological assignment including a number of mathematical tasks used as a subject of research for students. In the assignment a special place is allocated to the questions reflecting the interplay of a technical task with a mathematical method of research highlighting the objective significance of mathematics as a method to solve engineering problems. Discussion and Conclusions: the paper gives reasons to conditions for using research work with students as an organisational and methodical form of integrated training in mathematics. In realisation of educational technology it is logical to apply the method of projects. It is necessary to formulate a task as an engineering project: to set an engineering objective of research, to formulate specifications; to differentiate between engineering and mathematical tasks of the project, to make actual interrelations between them; the mathematical part of the project has to be a body of research; assessment of the project must be carried out not only accounting for
Experimental Evaluation of Integral Transformations for Engineering Drawings Vectorization
Directory of Open Access Journals (Sweden)
Vaský Jozef
2014-12-01
Full Text Available The concept of digital manufacturing supposes application of digital technologies in the whole product life cycle. Direct digital manufacturing includes such information technology processes, where products are directly manufactured from 3D CAD model. In digital manufacturing, engineering drawing is replaced by CAD product model. In the contemporary practice, lots of engineering paper-based drawings are still archived. They could be digitalized by scanner and stored to one of the raster graphics format and after that vectorized for interactive editing in the specific software system for technical drawing or for archiving in some of the standard vector graphics file format. The vector format is suitable for 3D model generating, too.The article deals with using of selected integral transformations (Fourier, Hough in the phase of digitalized raster engineering drawings vectorization.
Integrating protein engineering with process design for biocatalysis
DEFF Research Database (Denmark)
Woodley, John M.
2017-01-01
Biocatalysis uses enzymes for chemical synthesis and production, offering selective, safe and sustainable catalysis. While today the majority of applications are in the pharmaceutical sector, new opportunities are arising every day in other industry sectors, where production costs become a more...... important driver. In the early applications of the technology, it was necessary to design processes to match the properties of the biocatalyst. With the advent of protein engineering, organic chemists started to develop and improve enzymes to suit their needs. Likewise in industry, although not widespread......, a new paradigm was already implemented several years ago to engineer enzymes to suit process needs. Today, a new era is entered, where the effectiveness with which such integrated protein and process engineering is achieved becomes critical to implementation. In this paper, the development of a tool...
Improving Construction Process through Integration and Concurrent Engineering
Directory of Open Access Journals (Sweden)
Malik Khalfan
2012-11-01
Full Text Available In an increasingly competitive business environment, improvedtime-to-market, reduced production cost, quality of the productand customer involvement are rapidly becoming the key successfactors for any product development process. Consequently, mostorganisations are moving towards the adoption of latest technologyand new management concepts and philosophies such as totalquality management and concurrent engineering (CE to bringimprovement in their product development process. This paperdiscusses the adoption of integrated processes and CE withinthe construction industry to enable construction organisations toimprove their project development process. It also discusses aproposed integrated database model for the construction projects,which should enable the construction process to improve, becomemore effective and more efficient.
Nuclear plant engineering work and integrated management system
International Nuclear Information System (INIS)
Ohkubo, Y.; Obata, T.; Tanaka, K.
1992-01-01
The Application of computers to the design, engineering, manufacturing and construction works of nuclear power plants has greatly contributed to improvement of productivity and reliability in the nuclear power plants constructed by Mitsubishi Nuclear Group for more than ten years. However, in most cases, those systems have been developed separately and utilized independently in different computer software and hardware environments and have not been fully utilized to achieve high efficiency and reliability. In order to drastically increase the productivity and efficiency, development of NUclear power plant engineering Work and INtegrated manaGement System (NUWINGS) started in 1987 to unify and integrate various conventional and developing systems using the state-of-the-art computer technology. The NUWINGS is almost completed and is now applied to actual plant construction. (author)
Integral Engine Inlet Particle Separator. Volume 2. Design Guide
1975-08-01
herein will be used in the design of integral inlet particle separators for future Army aircraft gas turbine engines. Apprupriate technical personnel...into the comprensor at some future date. 5. A typical scavenge vane design Js; shown in Figures 85 and 86. The important features of the scavenge...service passageweys, for cooling of oil, and for directing sand and air into the scroll. Orientetion of the vanes is set by collection efficiency
Vehicle Systems Engineering and Integration Activities - Phase 5
2012-08-31
payload, 10,300 lb gross vehicle weight. The Expanded Capacity Vehicle (ECV, 1993-present) has a 6.5 liter turbo diesel Bolt on armor required...installed by the maintenance unit. A proposed ECV2 (not currently in production) has an improved 6.5 liter turbo diesel engine, a new transmission...frame (3 piece welded), integral “A” armor with attachment points for “B” armor kit, increased cab space (14 cubic feet), enhanced 6500 turbo diesel
Mechatronics engineering : New requirements on cross-functional integration
Adamsson, Niklas
2005-01-01
Several industrial sectors experience an increased reliance on mechatronic systems as electronics and software are being embedded into the traditional mechanical systems of these industries. Important challenges within mechatronics engineering comes from management of multi-disciplinary development project teams and the highly complex scope of problems, which in turn require extensive coordination and integration, both in terms of technical and organisational matters. The concept of cross-fun...
Yang-Baxter algebra - Integrable systems - Conformal quantum field theories
International Nuclear Information System (INIS)
Karowski, M.
1989-01-01
This series of lectures is based on investigations [1,2] of finite-size corrections for the six-vertex model by means of Bethe ansatz methods. In addition a review on applications of Yang-Baxter algebras and an introduction to the theory of integrable systems and the algebraic Bethe ansatz is presented. A Θ-vacuum like angle appearing in the RSOS-models is discussed. The continuum limit in the critical case of these statistical models is performed to obtain the minimal models of conformal quantum field theory. (author)
International Nuclear Information System (INIS)
Murphy, J.A.; Caliva, R.M.; Wixson, J.R.
1997-01-01
The Idaho National Engineering Laboratory (INEL) is one of many Department of Energy (DOE) national laboratories that has been performing environmental cleanup and stabilization, which was accelerated upon the end of the cold war. In fact, the INEL currently receives two-thirds of its scope to perform these functions. However, the cleanup is a highly interactive system that creates an opportunity for systems engineering methodology to be employed. At the INEL, a group called EM (Environmental Management) Integration has been given this charter along with a small core of systems engineers. This paper discusses the progress to date of converting the INEL legacy system into one that uses the systems engineering discipline as the method to ensure that external requirements are met
Developing an Integration Infrastructure for Distributed Engine Control Technologies
Culley, Dennis; Zinnecker, Alicia; Aretskin-Hariton, Eliot; Kratz, Jonathan
2014-01-01
Turbine engine control technology is poised to make the first revolutionary leap forward since the advent of full authority digital engine control in the mid-1980s. This change aims squarely at overcoming the physical constraints that have historically limited control system hardware on aero-engines to a federated architecture. Distributed control architecture allows complex analog interfaces existing between system elements and the control unit to be replaced by standardized digital interfaces. Embedded processing, enabled by high temperature electronics, provides for digitization of signals at the source and network communications resulting in a modular system at the hardware level. While this scheme simplifies the physical integration of the system, its complexity appears in other ways. In fact, integration now becomes a shared responsibility among suppliers and system integrators. While these are the most obvious changes, there are additional concerns about performance, reliability, and failure modes due to distributed architecture that warrant detailed study. This paper describes the development of a new facility intended to address the many challenges of the underlying technologies of distributed control. The facility is capable of performing both simulation and hardware studies ranging from component to system level complexity. Its modular and hierarchical structure allows the user to focus their interaction on specific areas of interest.
Path-integral invariants in abelian Chern–Simons theory
International Nuclear Information System (INIS)
Guadagnini, E.; Thuillier, F.
2014-01-01
We consider the U(1) Chern–Simons gauge theory defined in a general closed oriented 3-manifold M; the functional integration is used to compute the normalized partition function and the expectation values of the link holonomies. The non-perturbative path-integral is defined in the space of the gauge orbits of the connections which belong to the various inequivalent U(1) principal bundles over M; the different sectors of configuration space are labelled by the elements of the first homology group of M and are characterized by appropriate background connections. The gauge orbits of flat connections, whose classification is also based on the homology group, control the non-perturbative contributions to the mean values. The functional integration is carried out in any 3-manifold M, and the corresponding path-integral invariants turn out to be strictly related with the abelian Reshetikhin–Turaev surgery invariants
Directory of Open Access Journals (Sweden)
Soren Ventegodt
2003-01-01
Full Text Available Quality of life (QOL means a good life and we believe that a good life is the same as living a life with a high quality. This paper presents the theoretical and philosophical framework of the Danish Quality of Life Survey, and of the SEQOL, QOL5, and QOL1 questionnaires.The notion of a good life can be observed from subjective to the objective, where this spectrum incorporates a number of existing quality of life theories. We call this spectrum the integrative quality-of-life (IQOL theory and discuss the following aspects in this paper: well being, satisfaction with life, happiness, meaning in life, the biological information system (�balance�, realizing life potential, fulfillment of needs, and objective factors.The philosophy of life outlined in this paper tries to measure the global quality of life with questions derived from the integrative theory of the quality of life. The IQOL theory is an overall theory or meta-theory encompassing eight more factual theories in a subjective-existential-objective spectrum. Other philosophies of life can stress other aspects of life, but by this notion of introducing such an existential depth into the health and social sciences, we believe to have taken a necessary step towards a new humility and respect for the richness and complexity of life.
The foundational origin of integrability in quantum field theory
International Nuclear Information System (INIS)
Schroer, Bert; FU-Berlin
2012-02-01
There are two foundational model-independent concepts of integrability in QFT. One is 'dynamical' and generalizes the solvability in closed analytic form of the dynamical aspects as known from the Kepler two-body problem and its quantum mechanical counterpart. The other, referred to as 'kinematical' integrability, has no classical nor even quantum mechanical counterpart; it describes the relation between so called eld algebra and its local observable subalgebras and their discrete inequivalent representation classes (the DHR theory of superselection sectors). In the standard case of QFTs with mass gaps it contains the information about the representation of the (necessary compact) internal symmetry group and statistics in form of a tracial state on a 'dual group'. In Lagrangian or functional quantization one deals with the eld algebra and the division into observable /eld algebras does presently not play a role in constructive approaches to QFT. 'Kinematical' integrability is however of particular interest in conformal theories where the observable algebra fulfils the Huygens principle (light like propagation) and lives on the compactified Minkowski spacetime whereas the eld algebra, whose spacetime symmetry group is the universal covering of the conformal group lives on the universal covering of the compactified Minkowski spacetime. Since the (anomalous) dimensions of fields show up in the spectrum of the unitary representative of the center of this group , the kinematical structure contained in the relation fields/Huygens observables valuable information which in the usual terminology would be called 'dynamical'. The dynamical integrability is defined in terms of properties of 'wedge localization' and uses the fact that modular localization theory allows to 'emulate' interaction-free wedge-localized operators in a objective manner with the wedge localized interacting algebra. Emulation can be viewed as a generalization of the functorial relation between localized
BOOK REVIEW: Path Integrals in Field Theory: An Introduction
Ryder, Lewis
2004-06-01
In the 1960s Feynman was known to particle physicists as one of the people who solved the major problems of quantum electrodynamics, his contribution famously introducing what are now called Feynman diagrams. To other physicists he gained a reputation as the author of the Feynman Lectures on Physics; in addition some people were aware of his work on the path integral formulation of quantum theory, and a very few knew about his work on gravitation and Yang--Mills theories, which made use of path integral methods. Forty years later the scene is rather different. Many of the problems of high energy physics are solved; and the standard model incorporates Feynman's path integral method as a way of proving the renormalisability of the gauge (Yang--Mills) theories involved. Gravitation is proving a much harder nut to crack, but here also questions of renormalisability are couched in path-integral language. What is more, theoretical studies of condensed matter physics now also appeal to this technique for quantisation, so the path integral method is becoming part of the standard apparatus of theoretical physics. Chapters on it appear in a number of recent books, and a few books have appeared devoted to this topic alone; the book under review is a very recent one. Path integral techniques have the advantage of enormous conceptual appeal and the great disadvantage of mathematical complexity, this being partly the result of messy integrals but more fundamentally due to the notions of functional differentiation and integration which are involved in the method. All in all this subject is not such an easy ride. Mosel's book, described as an introduction, is aimed at graduate students and research workers in particle physics. It assumes a background knowledge of quantum mechanics, both non-relativistic and relativistic. After three chapters on the path integral formulation of non-relativistic quantum mechanics there are eight chapters on scalar and spinor field theory, followed
The fully integrated engineer combining technical ability and leadership prowess
Cerri, Steven T
2016-01-01
College teaches you to be a good engineer. But it's likely that your college engineering courses didn't have time to teach you how to effectively contribute your ideas or how to transition to management or leadership. This book provides you with those missing tools. This book addresses the differences between being proficient as a technical individual and effectively contributing to and leading a team to effectively contribute to various projects. The Fully Integrated Engineer: Combining Technical Ability and Leadership Prowess shines a light on how the habits learned in school, while contributing to individual short-term success, actually become hindrances in the modern engineering workplace if your goal is to achieve long-term success as either an engineer, a team lead, manager, or leader. The author offers specific ways to address those limiting habits, turning you into an effective team contributor and leader building toward long-term career succes . The author’s approach to retooling less-than-op...
Theory, modeling, and integrated studies in the Arase (ERG) project
Seki, Kanako; Miyoshi, Yoshizumi; Ebihara, Yusuke; Katoh, Yuto; Amano, Takanobu; Saito, Shinji; Shoji, Masafumi; Nakamizo, Aoi; Keika, Kunihiro; Hori, Tomoaki; Nakano, Shin'ya; Watanabe, Shigeto; Kamiya, Kei; Takahashi, Naoko; Omura, Yoshiharu; Nose, Masahito; Fok, Mei-Ching; Tanaka, Takashi; Ieda, Akimasa; Yoshikawa, Akimasa
2018-02-01
Understanding of underlying mechanisms of drastic variations of the near-Earth space (geospace) is one of the current focuses of the magnetospheric physics. The science target of the geospace research project Exploration of energization and Radiation in Geospace (ERG) is to understand the geospace variations with a focus on the relativistic electron acceleration and loss processes. In order to achieve the goal, the ERG project consists of the three parts: the Arase (ERG) satellite, ground-based observations, and theory/modeling/integrated studies. The role of theory/modeling/integrated studies part is to promote relevant theoretical and simulation studies as well as integrated data analysis to combine different kinds of observations and modeling. Here we provide technical reports on simulation and empirical models related to the ERG project together with their roles in the integrated studies of dynamic geospace variations. The simulation and empirical models covered include the radial diffusion model of the radiation belt electrons, GEMSIS-RB and RBW models, CIMI model with global MHD simulation REPPU, GEMSIS-RC model, plasmasphere thermosphere model, self-consistent wave-particle interaction simulations (electron hybrid code and ion hybrid code), the ionospheric electric potential (GEMSIS-POT) model, and SuperDARN electric field models with data assimilation. ERG (Arase) science center tools to support integrated studies with various kinds of data are also briefly introduced.[Figure not available: see fulltext.
Classical and Quantum Nonlinear Integrable Systems: Theory and Application
International Nuclear Information System (INIS)
Brzezinski, Tomasz
2003-01-01
This is a very interesting collection of introductory and review articles on the theory and applications of classical and quantum integrable systems. The book reviews several integrable systems such as the KdV equation, vertex models, RSOS and IRF models, spin chains, integrable differential equations, discrete systems, Ising, Potts and other lattice models and reaction--diffusion processes, as well as outlining major methods of solving integrable systems. These include Lax pairs, Baecklund and Miura transformations, the inverse scattering method, various types of the Bethe Ansatz, Painleve methods, the dbar method and fusion methods to mention just a few. The book is divided into two parts, each containing five chapters. The first part is devoted to classical integrable systems and introduces the subject through the KdV equation, and then proceeds through Painleve analysis, discrete systems and two-dimensional integrable partial differential equations, to culminate in the review of solvable lattice models in statistical physics, solved through the coordinate and algebraic Bethe Ansatz methods. The second part deals with quantum integrable systems, and begins with an outline of unifying approaches to quantum, statistical, ultralocal and non-ultralocal systems. The theory and methods of solving quantum integrable spin chains are then described. Recent developments in applying Bethe Ansatz methods in condensed matter physics, including superconductivity and nanoscale physics, are reviewed. The book concludes with an introduction to diffusion-reaction processes. Every chapter is devoted to a different subject and is self-contained, and thus can be read separately. A reader interesting in classical methods of solitons, such as the methods of solving the KdV equation, can start from Chapter 1, while a reader interested in the Bethe Ansatz method can immediately proceed to Chapter 5, and so on. Thus the book should appeal and be useful to a wide range of theoretical
Path integral theory and deep inelastic scattering of nuclei
International Nuclear Information System (INIS)
Neto, J.L.
1981-10-01
A formalism, based on Feynman's path integral, is developed and used in the theory of deep inelastic collisions of nuclei. Having shown how to express the propagator of the Wigner function of an isolated system as a (double) path integral in phase space, random processes are considered and the influence functional in interacting systems is discussed. A semi-classical description for the reduced Wigner and a generalized Langevin equation are given. Finally, the formalism is used in a random matrix model for deep inelastic collisions. (U.K.)
Mathematical theory of Feynman path integrals an introduction
Albeverio, Sergio A; Mazzucchi, Sonia
2008-01-01
Feynman path integrals, suggested heuristically by Feynman in the 40s, have become the basis of much of contemporary physics, from non-relativistic quantum mechanics to quantum fields, including gauge fields, gravitation, cosmology. Recently ideas based on Feynman path integrals have also played an important role in areas of mathematics like low-dimensional topology and differential geometry, algebraic geometry, infinite-dimensional analysis and geometry, and number theory. The 2nd edition of LNM 523 is based on the two first authors' mathematical approach of this theory presented in its 1st edition in 1976. To take care of the many developments since then, an entire new chapter on the current forefront of research has been added. Except for this new chapter and the correction of a few misprints, the basic material and presentation of the first edition has been maintained. At the end of each chapter the reader will also find notes with further bibliographical information.
Organic unity theory: an integrative mind-body theory for psychiatry.
Goodman, A
1997-12-01
The potential of psychiatry as an integrative science has been impeded by an internal schism that derives from the duality of mental and physical. Organic unity theory is proposed as a conceptual framework that brings together the terms of the mind-body duality in one coherent perspective. Organic unity theory is braided of three strands: identity, which describes the relationship between mentally described events and corresponding physically described events; continuity, which describes the linguistic-conceptual system that contains both mental and physical terms; and dialectic, which describes the relationship between the empirical way of knowing that is associated with the physical domain of the linguistic-conceptual system and the hermeneutic way of knowing that is associated with the mental domain. Each strand represents an integrative formulation that resolves an aspect of mental-physical dualism into an underlying unity. After the theory is presented, its implications for psychiatry are briefly considered.
Threaded cognition: an integrated theory of concurrent multitasking.
Salvucci, Dario D; Taatgen, Niels A
2008-01-01
The authors propose the idea of threaded cognition, an integrated theory of concurrent multitasking--that is, performing 2 or more tasks at once. Threaded cognition posits that streams of thought can be represented as threads of processing coordinated by a serial procedural resource and executed across other available resources (e.g., perceptual and motor resources). The theory specifies a parsimonious mechanism that allows for concurrent execution, resource acquisition, and resolution of resource conflicts, without the need for specialized executive processes. By instantiating this mechanism as a computational model, threaded cognition provides explicit predictions of how multitasking behavior can result in interference, or lack thereof, for a given set of tasks. The authors illustrate the theory in model simulations of several representative domains ranging from simple laboratory tasks such as dual-choice tasks to complex real-world domains such as driving and driver distraction. (c) 2008 APA, all rights reserved
Integrated multi-resource planning and scheduling in engineering project
Directory of Open Access Journals (Sweden)
Samer Ben Issa
2017-01-01
Full Text Available Planning and scheduling processes in project management are carried out sequentially in prac-tice, i.e. planning project activities first without visibility of resource limitation, and then schedul-ing the project according to these pre-planned activities. This is a need to integrate these two pro-cesses. In this paper, we use Branch and Bound approach for generating all the feasible and non-feasible project schedules with/without activity splitting, and with a new criterion called “the Minimum Moments of Resources Required around X-Y axes (MMORR”, we select the best feasible project schedule to integrate plan processing and schedule processing for engineering projects. The results illustrate that this integrated approach can effectively select the best feasible project schedule among alternatives, improves the resource utilization, and shortens the project lead time.
Engineering Physics Division integral experiments and their analyses
International Nuclear Information System (INIS)
Anon.
1980-01-01
Integral experiments are performed as part of the Engineering Physics Division's on-going research in the development and application of radiation shielding methods. Integral experiments performed at the Oak Ridge Electron Linear Accelerator (ORELA) under the Division's Magnetic Fusion program are designed to provide data against which ORNL and all other organizations involved in shielding calculations for fusion devices can test their calculational methods and interaction data. The Tower Shielding Facility (TSF) continues to be the primary source of integral data for fission reactor shielding design. The experiments performed at the TSF during the last few years have been sponsored by the Gas Cooled Fast Reactor (GCFR) program. During this report period final documentation was also prepared for the remaining LMFBR shielding experiments, including an examination of streaming through annular slits and measurement of secondary gamma-ray production in reinforced concrete
INTEGRATIVE APPROACH ON FRAMING THEORY FROM ITS MULTIPARADIGMATIC CONDITION
Directory of Open Access Journals (Sweden)
Juan Antonio Marín Albaladejo
2014-06-01
Full Text Available Framing theory has reached an increasing role in media communication research, including common principles between different research perspectives. Besides the multiple ways of understanding the concept of frame, a controversy about the types of frames exists. Despite considerable integrating research efforts (D’Angelo, 2002; De Vreese, 2005; Entman, 1993, 2004; López-Rabadán, 2010; Matthes, 2012; Reese, 2007; Scheufele, 1999, scholars have not reached yet full conceptual and methodological convergence, so that definitions, theoretical models, frames measuring mode, types of frames, processes or effects differ in each study (Scheufele, 1999. This article provides an updated review of the different paradigms that define research efforts on this theory, and mentions the advantages to invest in an integrative model or paradigmatic synthesis for future studies. Through a comprehensive review of the published literature, we propose two objectives. On the one hand, to provide a taxonomy of the types of frame to clarify differences detected among studies labeled under this theory. It also seeks to justify the need to consider Framing theory as a multiparadigmatic research program (D'Angelo, 2002 that could include all perspectives established so far.
Integrable spin chain in superconformal Chern-Simons theory
International Nuclear Information System (INIS)
Bak, Dongsu; Rey, Soo-Jong
2008-01-01
N = 6 superconformal Chern-Simons theory was proposed as gauge theory dual to Type IIA string theory on AdS 4 x CP 3 . We study integrability of the theory from conformal dimension spectrum of single trace operators at planar limit. At strong 't Hooft coupling, the spectrum is obtained from excitation energy of free superstring on OSp(6|4; R)/SO(3, 1) x SU(3) x U(1) supercoset. We recall that the worldsheet theory is integrable classically by utilizing well-known results concerning sigma model on symmetric space. With R-symmetry group SU(4), we also solve relevant Yang-Baxter equation for a spin chain system associated with the single trace operators. From the solution, we construct alternating spin chain Hamiltonian involving three-site interactions between 4 and 4-bar . At weak 't Hooft coupling, we study gauge theory perturbatively, and calculate action of dilatation operator to single trace operators up to two loops. To ensure consistency, we computed all relevant Feynman diagrams contributing to the dilatation opeator. We find that resulting spin chain Hamiltonian matches with the Hamiltonian derived from Yang-Baxter equation. We further study new issues arising from the shortest gauge invariant operators TrY I Y † J = (15, 1). We observe that 'wrapping interactions' are present, compute the true spectrum and find that the spectrum agrees with prediction from supersymmetry. We also find that scaling dimension computed naively from alternating spin chain Hamiltonian coincides with the true spectrum. We solve Bethe ansatz equations for small number of excitations, and find indications of correlation between excitations of 4's and 4-bar 's and of nonexistence of mesonic (44-bar ) bound-state.
Integrative mental health care: from theory to practice, part 1.
Lake, James
2007-01-01
Integrative approaches will lead to more accurate and different understandings of mental illness. Beneficial responses to complementary and alternative therapies provide important clues about the phenomenal nature of the human body in space-time and disparate biological, informational, and energetic factors associated with normal and abnormal psychological functioning. The conceptual framework of contemporary Western psychiatry includes multiple theoretical viewpoints, and there is no single best explanatory model of mental illness. Future theories of mental illness causation will not depend exclusively on empirical verification of strictly biological processes but will take into account both classically described biological processes and non-classical models, including complexity theory, resulting in more complete explanations of the characteristics and causes of symptoms and mechanisms of action that result in beneficial responses to treatments. Part 1 of this article examines the limitations of the theory and contemporary clinical methods employed in Western psychiatry and discusses implications of emerging paradigms in physics and the biological sciences for the future of psychiatry. In part 2, a practical methodology for planning integrative assessment and treatment strategies in mental health care is proposed. Using this methodology the integrative management of moderate and severe psychiatric symptoms is reviewed in detail. As the conceptual framework of Western medicine evolves toward an increasingly integrative perspective, novel understandings of complex relationships between biological, informational, and energetic processes associated with normal psychological functioning and mental illness will lead to more effective integrative assessment and treatment strategies addressing the causes or meanings of symptoms at multiple hierarchic levels of body-brain-mind.
Integrative mental health care: from theory to practice, Part 2.
Lake, James
2008-01-01
Integrative approaches will lead to more accurate and different understandings of mental illness. Beneficial responses to complementary and alternative therapies provide important clues about the phenomenal nature of the human body in space-time and disparate biological, informational, and energetic factors associated with normal and abnormal psychological functioning. The conceptual framework of contemporary Western psychiatry includes multiple theoretical viewpoints, and there is no single best explanatory model of mental illness. Future theories of mental illness causation will not depend exclusively on empirical verification of strictly biological processes but will take into account both classically described biological processes and non-classical models, including complexity theory, resulting in more complete explanations of the characteristics and causes of symptoms and mechanisms of action that result in beneficial responses to treatments. Part 1 of this article examined the limitations of the theory and contemporary clinical methods employed in Western psychiatry and discussed implications of emerging paradigms in physics and the biological sciences for the future of psychiatry. In part 2, a practical methodology, for planning integrative assessment and treatment strategies in mental health care is proposed. Using this methodology the integrative management of moderate and severe psychiatric symptoms is reviewed in detail. As the conceptual framework of Western medicine evolves toward an increasingly integrative perspective, novel understanding of complex relationships between biological, informational, and energetic processes associated with normal psychological functioning and mental illness will lead to more effective integrative assessment and treatment strategies addressing the causes or meanings of symptoms at multiple hierarchic levels of body-brain-mind.
Theory-practice integration in selected clinical situations
Directory of Open Access Journals (Sweden)
M Davhana-Maselesele
2001-09-01
Full Text Available The current changes in health care systems challenge knowledgeable, mature and independent practitioners to integrate theoretical content with practice. The aim of this study was to investigate the problems of integrating theory with practice in selected clinical nursing situations. The study focused on rendering of family planning services to clients as a component of Community Nursing Science. Structured observation schedules were used to observe the theoretical content of the curriculum as well as the practical application of what has been taught in the clinical area. The findings of the study revealed that there was a need for an integrated holistic curriculum, which would address the needs of the community. It was concluded that a problem-based and community-based curriculum, intersectoral collaboration between college and hospital managements and student involvement in all processes of teaching and learning would improve the integration of theory and practice. There also appeared to be a need for tutors to be more involved in clinical teaching and accompaniment.
Modification site localization scoring integrated into a search engine.
Baker, Peter R; Trinidad, Jonathan C; Chalkley, Robert J
2011-07-01
Large proteomic data sets identifying hundreds or thousands of modified peptides are becoming increasingly common in the literature. Several methods for assessing the reliability of peptide identifications both at the individual peptide or data set level have become established. However, tools for measuring the confidence of modification site assignments are sparse and are not often employed. A few tools for estimating phosphorylation site assignment reliabilities have been developed, but these are not integral to a search engine, so require a particular search engine output for a second step of processing. They may also require use of a particular fragmentation method and are mostly only applicable for phosphorylation analysis, rather than post-translational modifications analysis in general. In this study, we present the performance of site assignment scoring that is directly integrated into the search engine Protein Prospector, which allows site assignment reliability to be automatically reported for all modifications present in an identified peptide. It clearly indicates when a site assignment is ambiguous (and if so, between which residues), and reports an assignment score that can be translated into a reliability measure for individual site assignments.
Ion engine auxiliary propulsion applications and integration study
Zafran, S. (Editor)
1977-01-01
The benefits derived from application of the 8-cm mercury electron bombardment ion thruster were assessed. Two specific spacecraft missions were studied. A thruster was tested to provide additional needed information on its efflux characteristics and interactive effects. A Users Manual was then prepared describing how to integrate the thruster for auxiliary propulsion on geosynchronous satellites. By incorporating ion engines on an advanced communications mission, the weight available for added payload increases by about 82 kg (181 lb) for a 100 kg (2200 lb) satellite which otherwise uses electrothermal hydrazine. Ion engines can be integrated into a high performance propulsion module that is compatible with the multimission modular spacecraft and can be used for both geosynchronous and low earth orbit applications. The low disturbance torques introduced by the ion engines permit accurate spacecraft pointing with the payload in operation during thrusting periods. The feasibility of using the thruster's neutralizer assembly for neutralization of differentially charged spacecraft surfaces at geosynchronous altitude was demonstrated during the testing program.
Salleh, Tuan Salwani; Zakaria, Effandi
2016-01-01
The objective of this research is to investigate the effectiveness of a learning strategy using Maple in integral calculus. This research was conducted using a quasi-experimental nonequivalent control group design. One hundred engineering technology students at a technical university were chosen at random. The effectiveness of the learning…
Initial states in integrable quantum field theory quenches from an integral equation hierarchy
Directory of Open Access Journals (Sweden)
D.X. Horváth
2016-01-01
Full Text Available We consider the problem of determining the initial state of integrable quantum field theory quenches in terms of the post-quench eigenstates. The corresponding overlaps are a fundamental input to most exact methods to treat integrable quantum quenches. We construct and examine an infinite integral equation hierarchy based on the form factor bootstrap, proposed earlier as a set of conditions determining the overlaps. Using quenches of the mass and interaction in Sinh-Gordon theory as a concrete example, we present theoretical arguments that the state has the squeezed coherent form expected for integrable quenches, and supporting an Ansatz for the solution of the hierarchy. Moreover we also develop an iterative method to solve numerically the lowest equation of the hierarchy. The iterative solution along with extensive numerical checks performed using the next equation of the hierarchy provides a strong numerical evidence that the proposed Ansatz gives a very good approximation for the solution.
Initial states in integrable quantum field theory quenches from an integral equation hierarchy
Energy Technology Data Exchange (ETDEWEB)
Horváth, D.X., E-mail: esoxluciuslinne@gmail.com [MTA-BME “Momentum” Statistical Field Theory Research Group, Budafoki út 8, 1111 Budapest (Hungary); Department of Theoretical Physics, Budapest University of Technology and Economics, Budafoki út 8, 1111 Budapest (Hungary); Sotiriadis, S., E-mail: sotiriad@sissa.it [SISSA and INFN, Via Bonomea 265, 34136 Trieste (Italy); Takács, G., E-mail: takacsg@eik.bme.hu [MTA-BME “Momentum” Statistical Field Theory Research Group, Budafoki út 8, 1111 Budapest (Hungary); Department of Theoretical Physics, Budapest University of Technology and Economics, Budafoki út 8, 1111 Budapest (Hungary)
2016-01-15
We consider the problem of determining the initial state of integrable quantum field theory quenches in terms of the post-quench eigenstates. The corresponding overlaps are a fundamental input to most exact methods to treat integrable quantum quenches. We construct and examine an infinite integral equation hierarchy based on the form factor bootstrap, proposed earlier as a set of conditions determining the overlaps. Using quenches of the mass and interaction in Sinh-Gordon theory as a concrete example, we present theoretical arguments that the state has the squeezed coherent form expected for integrable quenches, and supporting an Ansatz for the solution of the hierarchy. Moreover we also develop an iterative method to solve numerically the lowest equation of the hierarchy. The iterative solution along with extensive numerical checks performed using the next equation of the hierarchy provides a strong numerical evidence that the proposed Ansatz gives a very good approximation for the solution.
Integrability and the conformal field theory of the Higgs branch
International Nuclear Information System (INIS)
Sax, Olof Ohlsson; Sfondrini, Alessandro; Bogdan, Stefański Jr.
2015-01-01
In the context of the AdS 3 /CFT 2 correspondence, we investigate the Higgs branch CFT 2 . Witten showed that states localised near the small instanton singularity can be described in terms of vector multiplet variables. This theory has a planar, weak-coupling limit, in which anomalous dimensions of single-trace composite operators can be calculated. At one loop, the calculation reduces to finding the spectrum of a spin-chain with nearest-neighbour interactions. This CFT 2 spin-chain matches precisely the one that was previously found as the weak-coupling limit of the integrable system describing the AdS 3 side of the duality. We compute the one-loop dilatation operator in a non-trivial compact subsector and show that it corresponds to an integrable spin-chain Hamiltonian. This provides the first direct evidence of integrability on the CFT 2 side of the correspondence.
GLobal Integrated Design Environment (GLIDE): A Concurrent Engineering Application
McGuire, Melissa L.; Kunkel, Matthew R.; Smith, David A.
2010-01-01
The GLobal Integrated Design Environment (GLIDE) is a client-server software application purpose-built to mitigate issues associated with real time data sharing in concurrent engineering environments and to facilitate discipline-to-discipline interaction between multiple engineers and researchers. GLIDE is implemented in multiple programming languages utilizing standardized web protocols to enable secure parameter data sharing between engineers and researchers across the Internet in closed and/or widely distributed working environments. A well defined, HyperText Transfer Protocol (HTTP) based Application Programming Interface (API) to the GLIDE client/server environment enables users to interact with GLIDE, and each other, within common and familiar tools. One such common tool, Microsoft Excel (Microsoft Corporation), paired with its add-in API for GLIDE, is discussed in this paper. The top-level examples given demonstrate how this interface improves the efficiency of the design process of a concurrent engineering study while reducing potential errors associated with manually sharing information between study participants.
Harris, Laura L.
2003-01-01
Integrated a psychosocial developmental theory (the Kubler-Ross Stage Theory) and a psychological stage theory (the Ross Stage Theory) and a psychological stage theory (the Chickering and Reisser psychosocial and developmental theory) for challenging injured collegiate student-athletes' personal development. A search of online databases from…
The Structure of Design Theories, and an Analysis of their Use in Software Engineering Experiments
Wieringa, Roelf J.; Daneva, Maia; Condori-Fernandez, Nelly
In this paper we analyse possible reasons for the relatively low use of theories in software engineering (SE) papers found by Hannay et al.~cite{Hannay07}. We provide an initial explanation in terms of properties of theories, test this by analyzing 32 of the 40 theories reviewed by Hannay et al.,
Asakura, Nobuhiko; Inui, Toshio
2016-01-01
Two apparently contrasting theories have been proposed to account for the development of children's theory of mind (ToM): theory-theory and simulation theory. We present a Bayesian framework that rationally integrates both theories for false belief reasoning. This framework exploits two internal models for predicting the belief states of others: one of self and one of others. These internal models are responsible for simulation-based and theory-based reasoning, respectively. The framework further takes into account empirical studies of a developmental ToM scale (e.g., Wellman and Liu, 2004): developmental progressions of various mental state understandings leading up to false belief understanding. By representing the internal models and their interactions as a causal Bayesian network, we formalize the model of children's false belief reasoning as probabilistic computations on the Bayesian network. This model probabilistically weighs and combines the two internal models and predicts children's false belief ability as a multiplicative effect of their early-developed abilities to understand the mental concepts of diverse beliefs and knowledge access. Specifically, the model predicts that children's proportion of correct responses on a false belief task can be closely approximated as the product of their proportions correct on the diverse belief and knowledge access tasks. To validate this prediction, we illustrate that our model provides good fits to a variety of ToM scale data for preschool children. We discuss the implications and extensions of our model for a deeper understanding of developmental progressions of children's ToM abilities.
Integration of an ion engine on the Communications Technology Satellite.
Payne, W. F.; Finke, R. C.
1972-01-01
An ion engine subsystem intended for satellite stationkeeping tasks is described. Ion thrusters are chosen to perform the task because the specific impulse is at least an order of magnitude higher than the commonly used reaction control jets. The higher the value of specific impulse, the greater the total impulse that can be attained for a given weight of propellant, hence cost benefits result. The integration, subsystem testing, and the operating plans for the ion engine experiment to be flown in 1975 on the Canadian Communications Technology Satellite (CTS) are described. The subsystem is designed to demonstrate north-south stationkeeping, attitude control by means of thrust vectoring, long-term space storage and restart capability, and compatibility with a high powered communications transponder.
Integrating ergonomics into engineering design: the role of objects.
Hall-Andersen, Lene Bjerg; Broberg, Ole
2014-05-01
The objective of this study was to explore the role of objects in integrating ergonomic knowledge in engineering design processes. An engineering design case was analyzed using the theoretical concepts of boundary objects and intermediary objects: Boundary objects facilitate collaboration between different knowledge domains, while the aim of an intermediary object is to circulate knowledge and thus produce a distant effect. Adjustable layout drawings served as boundary objects and had a positive impact on the dialog between an ergonomist and designers. An ergonomic guideline document was identified as an intermediary object. However, when the ergonomic guidelines were circulated in the design process, only some of the guidelines were transferred to the design of the sterile processing plant. Based on these findings, recommendations for working with objects in design processes are included. Copyright © 2013 Elsevier Ltd and The Ergonomics Society. All rights reserved.
The social neuroscience and the theory of integrative levels.
Bello-Morales, Raquel; Delgado-García, José María
2015-01-01
The theory of integrative levels provides a general description of the evolution of matter through successive orders of complexity and integration. Along its development, material forms pass through different levels of organization, such as physical, chemical, biological or sociological. The appearance of novel structures and dynamics during this process of development of matter in complex systems has been called emergence. Social neuroscience (SN), an interdisciplinary field that aims to investigate the biological mechanisms that underlie social structures, processes, and behavior and the influences between social and biological levels of organization, has affirmed the necessity for including social context as an essential element to understand the human behavior. To do this, SN proposes a multilevel integrative approach by means of three principles: multiple determinism, nonadditive determinism and reciprocal determinism. These theoretical principles seem to share the basic tenets of the theory of integrative levels but, in this paper, we aim to reveal the differences among both doctrines. First, SN asserts that combination of neural and social variables can produce emergent phenomena that would not be predictable from a neuroscientific or social psychological analysis alone; SN also suggests that to achieve a complete understanding of social structures we should use an integrative analysis that encompasses levels of organization ranging from the genetic level to the social one; finally, SN establishes that there can be mutual influences between biological and social factors in determining behavior, accepting, therefore, a double influence, upward from biology to social level, and downward, from social level to biology. In contrast, following the theory of integrative levels, emergent phenomena are not produced by the combination of variables from two levels, but by the increment of complexity at one level. In addition, the social behavior and structures might be
The social neuroscience and the theory of integrative levels
Directory of Open Access Journals (Sweden)
Raquel eBello-Morales
2015-10-01
Full Text Available The theory of integrative levels provides a general description of the evolution of matter through successive orders of complexity and integration. Along its development, material forms pass through different levels of organization, such as physical, chemical, biological or sociological. The appearance of novel structures and dynamics during this process of development of matter in complex systems has been called emergence. Social neuroscience (SN, an interdisciplinary field that aims to investigate the biological mechanisms that underlie social structures, processes, and behavior and the influences between social and biological levels of organization, has affirmed the necessity for including social context as an essential element to understand the human behavior. To do this, SN proposes a multilevel integrative approach by means of three principles: multiple determinism, nonadditive determinism and reciprocal determinism. These theoretical principles seem to share the basic tenets of the theory of integrative levels but, in this paper, we aim to reveal the differences among both doctrines.First, SN asserts that combination of neural and social variables can produce emergent phenomena that would not be predictable from a neuroscientific or social psychological analysis alone; SN also suggests that to achieve a complete understanding of social structures we should use an integrative analysis that encompasses levels of organization ranging from the genetic level to the social one; finally, SN establishes that there can be mutual influences between biological and social factors in determining behavior, accepting, therefore, a double influence, upward from biology to social level, and downward, from social level to biology.In contrast, following the theory of integrative levels, emergent phenomena are not produced by the combination of variables from two levels, but by the increment of complexity at one level. In addition, the social behavior and
Franks, Bradley; Bangerter, Adrian; Bauer, Martin W
2013-01-01
Conspiracy theories (CTs) can take many forms and vary widely in popularity, the intensity with which they are believed and their effects on individual and collective behavior. An integrated account of CTs thus needs to explain how they come to appeal to potential believers, how they spread from one person to the next via communication, and how they motivate collective action. We summarize these aspects under the labels of stick, spread, and action. We propose the quasi-religious hypothesis for CTs: drawing on cognitive science of religion, social representations theory, and frame theory. We use cognitive science of religion to describe the main features of the content of CTs that explain how they come to stick: CTs are quasi-religious representations in that their contents, forms and functions parallel those found in beliefs of institutionalized religions. However, CTs are quasi-religious in that CTs and the communities that support them, lack many of the institutional features of organized religions. We use social representations theory to explain how CTs spread as devices for making sense of sudden events that threaten existing worldviews. CTs allow laypersons to interpret such events by relating them to common sense, thereby defusing some of the anxiety that those events generate. We use frame theory to explain how some, but not all CTs mobilize collective counter-conspiratorial action by identifying a target and by proposing credible and concrete rationales for action. We specify our integrated account in 13 propositions.
Energy Technology Data Exchange (ETDEWEB)
Vasconcelos, Vanderley de; Silva, Eliane Magalhaes Pereira da; Costa, Antonio Carlos Lopes da; Reis, Sergio Carneiro dos [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)], e-mail: vasconv@cdtn.br, e-mail: silvaem@cdtn.br, e-mail: aclc@cdtn.br, e-mail: reissc@cdtn.br
2009-07-01
Nuclear energy has an important engineering legacy to share with the conventional industry. Much of the development of the tools related to safety, reliability, risk management, and human factors are associated with nuclear plant processes, mainly because the public concern about nuclear power generation. Despite the close association between these subjects, there are some important different approaches. The reliability engineering approach uses several techniques to minimize the component failures that cause the failure of the complex systems. These techniques include, for instance, redundancy, diversity, standby sparing, safety factors, and reliability centered maintenance. On the other hand system safety is primarily concerned with hazard management, that is, the identification, evaluation and control of hazards. Rather than just look at failure rates or engineering strengths, system safety would examine the interactions among system components. The events that cause accidents may be complex combinations of component failures, faulty maintenance, design errors, human actions, or actuation of instrumentation and control. Then, system safety deals with a broader spectrum of risk management, including: ergonomics, legal requirements, quality control, public acceptance, political considerations, and many other non-technical influences. Taking care of these subjects individually can compromise the completeness of the analysis and the measures associated with both risk reduction, and safety and reliability increasing. Analyzing together the engineering systems and controls of a nuclear facility, their management systems and operational procedures, and the human factors engineering, many benefits can be realized. This paper proposes an integration of these issues based on the application of systems theory. (author)
International Nuclear Information System (INIS)
Vasconcelos, Vanderley de; Silva, Eliane Magalhaes Pereira da; Costa, Antonio Carlos Lopes da; Reis, Sergio Carneiro dos
2009-01-01
Nuclear energy has an important engineering legacy to share with the conventional industry. Much of the development of the tools related to safety, reliability, risk management, and human factors are associated with nuclear plant processes, mainly because the public concern about nuclear power generation. Despite the close association between these subjects, there are some important different approaches. The reliability engineering approach uses several techniques to minimize the component failures that cause the failure of the complex systems. These techniques include, for instance, redundancy, diversity, standby sparing, safety factors, and reliability centered maintenance. On the other hand system safety is primarily concerned with hazard management, that is, the identification, evaluation and control of hazards. Rather than just look at failure rates or engineering strengths, system safety would examine the interactions among system components. The events that cause accidents may be complex combinations of component failures, faulty maintenance, design errors, human actions, or actuation of instrumentation and control. Then, system safety deals with a broader spectrum of risk management, including: ergonomics, legal requirements, quality control, public acceptance, political considerations, and many other non-technical influences. Taking care of these subjects individually can compromise the completeness of the analysis and the measures associated with both risk reduction, and safety and reliability increasing. Analyzing together the engineering systems and controls of a nuclear facility, their management systems and operational procedures, and the human factors engineering, many benefits can be realized. This paper proposes an integration of these issues based on the application of systems theory. (author)
Integrating Sustainability in a PBL Environment for Electronics Engineering
DEFF Research Database (Denmark)
Arsat, Mahyuddin; Holgaard, Jette Egelund; de Graaff, Erik
2013-01-01
(PBL) has been put forward as a promising pedagogical model and emerged as an opportunity to implement sustainability successfully. Due to the almost forty years of experience in PBL, a case study was carried out at Aalborg University, Denmark to excerpt their experience of integrating sustainability...... in a problem based learning environment. Three electronics engineering project modules were selected as example and empirically supported by constructed interviews with staff and document analysis of selected material. The findings were analysed with a systems approach and presented with reference to three...
Engineering Biomaterials to Integrate and Heal: The Biocompatibility Paradigm Shifts
Bryers, James D.; Giachelli, Cecilia M.; Ratner, Buddy D.
2012-01-01
This article focuses on one of the major failure routes of implanted medical devices, the foreign body reaction (FBR)—that is, the phagocytic attack and encapsulation by the body of the so-called “biocompatible” biomaterials comprising the devices. We then review strategies currently under development that might lead to biomaterial constructs that will harmoniously heal and integrate into the body. We discuss in detail emerging strategies to inhibit the FBR by engineering biomaterials that elicit more biologically pertinent responses. PMID:22592568
Collaboration in Global Software Engineering Based on Process Description Integration
Klein, Harald; Rausch, Andreas; Fischer, Edward
Globalization is one of the big trends in software development. Development projects need a variety of different resources with appropriate expert knowledge to be successful. More and more of these resources are nowadays obtained from specialized organizations and countries all over the world, varying in development approaches, processes, and culture. As seen with early outsourcing attempts, collaboration may fail due to these differences. Hence, the major challenge in global software engineering is to streamline collaborating organizations towards a successful conjoint development. Based on typical collaboration scenarios, this paper presents a structured approach to integrate processes in a comprehensible way.
Twistor theory at fifty: from contour integrals to twistor strings.
Atiyah, Michael; Dunajski, Maciej; Mason, Lionel J
2017-10-01
We review aspects of twistor theory, its aims and achievements spanning the last five decades. In the twistor approach, space-time is secondary with events being derived objects that correspond to compact holomorphic curves in a complex threefold-the twistor space. After giving an elementary construction of this space, we demonstrate how solutions to linear and nonlinear equations of mathematical physics-anti-self-duality equations on Yang-Mills or conformal curvature-can be encoded into twistor cohomology. These twistor correspondences yield explicit examples of Yang-Mills and gravitational instantons, which we review. They also underlie the twistor approach to integrability: the solitonic systems arise as symmetry reductions of anti-self-dual (ASD) Yang-Mills equations, and Einstein-Weyl dispersionless systems are reductions of ASD conformal equations. We then review the holomorphic string theories in twistor and ambitwistor spaces, and explain how these theories give rise to remarkable new formulae for the computation of quantum scattering amplitudes. Finally, we discuss the Newtonian limit of twistor theory and its possible role in Penrose's proposal for a role of gravity in quantum collapse of a wave function.
Entanglement entropy of non-unitary integrable quantum field theory
Directory of Open Access Journals (Sweden)
Davide Bianchini
2015-07-01
Full Text Available In this paper we study the simplest massive 1+1 dimensional integrable quantum field theory which can be described as a perturbation of a non-unitary minimal conformal field theory: the Lee–Yang model. We are particularly interested in the features of the bi-partite entanglement entropy for this model and on building blocks thereof, namely twist field form factors. Non-unitarity selects out a new type of twist field as the operator whose two-point function (appropriately normalized yields the entanglement entropy. We compute this two-point function both from a form factor expansion and by means of perturbed conformal field theory. We find good agreement with CFT predictions put forward in a recent work involving the present authors. In particular, our results are consistent with a scaling of the entanglement entropy given by ceff3logℓ where ceff is the effective central charge of the theory (a positive number related to the central charge and ℓ is the size of the region. Furthermore the form factor expansion of twist fields allows us to explore the large region limit of the entanglement entropy and find the next-to-leading order correction to saturation. We find that this correction is very different from its counterpart in unitary models. Whereas in the latter case, it had a form depending only on few parameters of the model (the particle spectrum, it appears to be much more model-dependent for non-unitary models.
Integrated information theory of consciousness: an updated account.
Tononi, G
2012-12-01
This article presents an updated account of integrated information theory of consciousness (liT) and some of its implications. /IT stems from thought experiments that lead to phenomenological axioms (existence, compositionality, information, integration, exclusion) and corresponding ontological postulates. The information axiom asserts that every experience is spec~fic - it is what it is by differing in its particular way from a large repertoire of alternatives. The integration axiom asserts that each experience is unified- it cannot be reduced to independent components. The exclusion axiom asserts that every experience is definite - it is limited to particular things and not others and flows at a particular speed and resolution. /IT formalizes these intuitions with postulates. The information postulate states that only "differences that make a difference" from the intrinsic perpective of a system matter: a mechanism generates cause-effect information if its present state has selective past causes and selective future effects within a system. The integration postulate states that only information that is irreducible matters: mechanisms generate integrated information only to the extent that the information they generate cannot be partitioned into that generated within independent components. The exclusion postulate states that only maxima of integrated information matter: a mechanism specifies only one maximally irreducible set of past causes and future effects - a concept. A complex is a set of elements specifying a maximally irreducible constellation of concepts, where the maximum is evaluated over elements and at the optimal spatiatemporal scale. Its concepts specify a maximally integrated conceptual information structure or quale, which is identical with an experience. Finally, changes in information integration upon exposure to the environment reflect a system's ability to match the causal structure of the world. After introducing an updated definition of
High-Voltage LED Light Engine with Integrated Driver
Energy Technology Data Exchange (ETDEWEB)
Soer, Wouter [Lumileds LLC, San Jose, CA (United States)
2016-02-29
LED luminaires have seen dramatic changes in cost breakdown over the past few years. The LED component cost, which until recently was the dominant portion of luminaire cost, has fallen to a level of the same order as the other luminaire components, such as the driver, housing, optics etc. With the current state of the technology, further luminaire performance improvement and cost reduction is realized most effectively by optimization of the whole system, rather than a single component. This project focuses on improving the integration between LEDs and drivers. Lumileds has developed a light engine platform based on low-cost high-power LEDs and driver topologies optimized for integration with these LEDs on a single substrate. The integration of driver and LEDs enables an estimated luminaire cost reduction of about 25% for targeted applications, mostly due to significant reductions in driver and housing cost. The high-power LEDs are based on Lumileds’ patterned sapphire substrate flip-chip (PSS-FC) technology, affording reduced die fabrication and packaging cost compared to existing technology. Two general versions of PSS-FC die were developed in order to create the desired voltage and flux increments for driver integration: (i) small single-junction die (0.5 mm^{2}), optimal for distributed lighting applications, and (ii) larger multi-junction die (2 mm^{2} and 4 mm^{2}) for high-power directional applications. Two driver topologies were developed: a tapped linear driver topology and a single-stage switch-mode topology, taking advantage of the flexible voltage configurations of the new PSS-FC die and the simplification opportunities enabled by integration of LEDs and driver on the same board. A prototype light engine was developed for an outdoor “core module” application based on the multi-junction PSS-FC die and the single-stage switch-mode driver. The light engine meets the project efficacy target of 128 lm/W at a luminous flux
From Foucault to Freire through Facebook: Toward an Integrated Theory of mHealth
Bull, Sheana; Ezeanochie, Nnamdi
2016-01-01
Objective: To document the integration of social science theory in literature on mHealth (mobile health) and consider opportunities for integration of classic theory, health communication theory, and social networking to generate a relevant theory for mHealth program design. Method: A secondary review of research syntheses and meta-analyses…
Surface charge algebra in gauge theories and thermodynamic integrability
International Nuclear Information System (INIS)
Barnich, Glenn; Compere, Geoffrey
2008-01-01
Surface charges and their algebra in interacting Lagrangian gauge field theories are constructed out of the underlying linearized theory using techniques from the variational calculus. In the case of exact solutions and symmetries, the surface charges are interpreted as a Pfaff system. Integrability is governed by Frobenius' theorem and the charges associated with the derived symmetry algebra are shown to vanish. In the asymptotic context, we provide a generalized covariant derivation of the result that the representation of the asymptotic symmetry algebra through charges may be centrally extended. Comparison with Hamiltonian and covariant phase space methods is made. All approaches are shown to agree for exact solutions and symmetries while there are differences in the asymptotic context
Pursuing Improvement in Clinical Reasoning: The Integrated Clinical Education Theory.
Jessee, Mary Ann
2018-01-01
The link between clinical education and development of clinical reasoning is not well supported by one theoretical perspective. Learning to reason during clinical education may be best achieved in a supportive sociocultural context of nursing practice that maximizes reasoning opportunities and facilitates discourse and meaningful feedback. Prelicensure clinical education seldom incorporates these critical components and thus may fail to directly promote clinical reasoning skill. Theoretical frameworks supporting the development of clinical reasoning during clinical education were evaluated. Analysis of strengths and gaps in each framework's support of clinical reasoning development was conducted. Commensurability of philosophical underpinnings was confirmed, and complex relationships among key concepts were elucidated. Six key concepts and three tenets comprise an explanatory predictive theory-the integrated clinical education theory (ICET). ICET provides critical theoretical support for inquiry and action to promote clinical education that improves development of clinical reasoning skill. [J Nurs Educ. 2018;57(1):7-13.]. Copyright 2018, SLACK Incorporated.
Theory of semiconductor junction devices a textbook for electrical and electronic engineers
Leck, J H
1967-01-01
Theory of Semiconductor Junction Devices: A Textbook for Electrical and Electronic Engineers presents the simplified numerical computation of the fundamental electrical equations, specifically Poisson's and the Hall effect equations. This book provides the fundamental theory relevant for the understanding of semiconductor device theory. Comprised of 10 chapters, this book starts with an overview of the application of band theory to the special case of semiconductors, both intrinsic and extrinsic. This text then describes the electrical properties of conductivity, semiconductors, and Hall effe
From behavior to neural dynamics: An integrated theory of attention
Buschman, Timothy J.; Kastner, Sabine
2015-01-01
The brain has a limited capacity and therefore needs mechanisms to selectively enhance the information most relevant to one’s current behavior. We refer to these mechanisms as ‘attention’. Attention acts by increasing the strength of selected neural representations and preferentially routing them through the brain’s large-scale network. This is a critical component of cognition and therefore has been a central topic in cognitive neuroscience. Here we review a diverse literature that has studied attention at the level of behavior, networks, circuits and neurons. We then integrate these disparate results into a unified theory of attention. PMID:26447577
Provider integration and local market conditions: a contingency theory perspective.
Young, G J; Parker, V A; Charns, M P
2001-01-01
In recent years we have witnessed an expanding array of organizational arrangements for providing health care services in the U.S. These arrangements integrate previously independent providers at one or more points on the continuum of care. The presence of so many of these arrangements raises the question of whether certain types are more effective than are others to help providers adapt to their environment. This article discusses contingency theory as a conceptual lens for guiding empirical studies of the effectiveness of different types of arrangements.
Engineering Integration: Building a Quick and Effective Faculty Seminar
Directory of Open Access Journals (Sweden)
Kate Peterson
2012-12-01
Full Text Available In the spring of 2010, the Science & Engineering Library of the University of Minnesota-Twin Cities partnered with the Information Literacy Librarian and offered a faculty seminar to the College of Science and Engineering. The seminar’s goals included 1. refreshing and expanding faculty’s knowledge of information and 21st century literacies and 2. creating a community of faculty committed to developing student skills in finding, evaluating and synthesizing information in their academic coursework and into their professional careers. Overall, the seminar increased faculty understanding of services and expertise of the libraries, and 21st century literacies. It also developed and strengthened ties between individual faculty members and their subject librarians, leading to a mix of outcomes from a faculty member partnering on a grant the Libraries applied for to course integrated instruction sessions to faculty participating in an e-textbook pilot. This seminar provides a strong model for re-framing information literacy in the context of teaching and learning in science and engineering, giving librarians an opportunity to strengthen relationships and increase liaison effectiveness.
Geometrical interpretation of the topological recursion, and integrable string theories
Eynard, Bertrand
2009-01-01
Symplectic invariants introduced in math-ph/0702045 can be computed for an arbitrary spectral curve. For some examples of spectral curves, those invariants can solve loop equations of matrix integrals, and many problems of enumerative geometry like maps, partitions, Hurwitz numbers, intersection numbers, Gromov-Witten invariants... The problem is thus to understand what they count, or in other words, given a spectral curve, construct an enumerative geometry problem. This is what we do in a semi-heuristic approach in this article. Starting from a spectral curve, i.e. an integrable system, we use its flat connection and flat coordinates, to define a family of worldsheets, whose enumeration is indeed solved by the topological recursion and symplectic invariants. In other words, for any spectral curve, we construct a corresponding string theory, whose target space is a submanifold of the Jacobian.
Integrated tracking, classification, and sensor management theory and applications
Krishnamurthy, Vikram; Vo, Ba-Ngu
2012-01-01
A unique guide to the state of the art of tracking, classification, and sensor management. This book addresses the tremendous progress made over the last few decades in algorithm development and mathematical analysis for filtering, multi-target multi-sensor tracking, sensor management and control, and target classification. It provides for the first time an integrated treatment of these advanced topics, complete with careful mathematical formulation, clear description of the theory, and real-world applications. Written by experts in the field, Integrated Tracking, Classification, and Sensor Management provides readers with easy access to key Bayesian modeling and filtering methods, multi-target tracking approaches, target classification procedures, and large scale sensor management problem-solving techniques.
Knowledge Management tools integration within DLR's concurrent engineering facility
Lopez, R. P.; Soragavi, G.; Deshmukh, M.; Ludtke, D.
The complexity of space endeavors has increased the need for Knowledge Management (KM) tools. The concept of KM involves not only the electronic storage of knowledge, but also the process of making this knowledge available, reusable and traceable. Establishing a KM concept within the Concurrent Engineering Facility (CEF) has been a research topic of the German Aerospace Centre (DLR). This paper presents the current KM tools of the CEF: the Software Platform for Organizing and Capturing Knowledge (S.P.O.C.K.), the data model Virtual Satellite (VirSat), and the Simulation Model Library (SimMoLib), and how their usage improved the Concurrent Engineering (CE) process. This paper also exposes the lessons learned from the introduction of KM practices into the CEF and elaborates a roadmap for the further development of KM in CE activities at DLR. The results of the application of the Knowledge Management tools have shown the potential of merging the three software platforms with their functionalities, as the next step towards the fully integration of KM practices into the CE process. VirSat will stay as the main software platform used within a CE study, and S.P.O.C.K. and SimMoLib will be integrated into VirSat. These tools will support the data model as a reference and documentation source, and as an access to simulation and calculation models. The use of KM tools in the CEF aims to become a basic practice during the CE process. The settlement of this practice will result in a much more extended knowledge and experience exchange within the Concurrent Engineering environment and, consequently, the outcome of the studies will comprise higher quality in the design of space systems.
On superwistor geometry and integrability in super gauge theory
International Nuclear Information System (INIS)
Wolf, M.
2006-01-01
devoted to a more detailed investigation of (classical) integrability of self-dual SYM theories. In particular, we explain the twistor construction of infinite-dimensional algebras of hidden symmetries. Our discussion is exemplified by derive affine extensions of internal and space-time symmetries. Furthermore, we construct self-dual SYM hierarchies and their truncated versions. these hierarchies describe an infinite number of flows on the respective solution space. The lowest level flows are space-time translations. The existence of such hierarchies allows us to embed a given solution to the equations of motion of self-dual SYM theory into an infinite-parameter family of new solutions. the dependence of the self-dual SYM fields on the additional moduli can be recovered by solving the equations of the hierarchy. We in addition derive infinitely many nonlocal conservation lwas. (orig.)
Of Syntheses and Surprises: Toward a Critical Integral Theory
Directory of Open Access Journals (Sweden)
Daniel Gustav Anderson
2006-12-01
Full Text Available The central concern of this article is how the search for formal structures with universal values functions ideologically, addressing Zizek’s claim that East-West syntheses may represent the dominant ideology par excellance of global capitalism. To this end, the article offers a Foucaultian genealogy of Integral theory, tracing its origins to the cultural and subjective contingencies of the British Empire, primarily in the work of Integral theory’s foundational thinker, Aurobindo Ghose. The article poses a primary critique of synthesis and evolution as mythological keys to Ultimate Reality which suggests that Zizek’s critique may have some validity, and offers the potential for a “critical integral theory” as an alternative. Situated in Deleuze and Guattari’s concept of becoming, and represented in the ideas and practices of a constellation of thinkers inclusive of Gurdjieff, Benjamin, and Trungpa, the article’s view of integration supports radical democracy as presented in the writings of Laclau and Mouffe as a model outcome for social and personal transformational practices.
Of Syntheses and Surprises:Toward a Critical Integral Theory
Directory of Open Access Journals (Sweden)
Daniel Gustav Anderson
2006-12-01
Full Text Available The central concern of this article is how the search for formal structures with universal values functions ideologically, addressing Zizek’s claim that East-West syntheses may represent the dominant ideology par excellance of global capitalism. To this end, the article offers a Foucaultian genealogy of Integral theory, tracing its origins to the cultural and subjective contingencies of the British Empire, primarily in the work of Integral theory’s foundational thinker, Aurobindo Ghose. The article poses a primary critique of synthesis and evolution as mythological keys to Ultimate Reality which suggests that Zizek’s critique may have some validity, and offers the potential for a “critical integral theory” as an alternative. Situated in Deleuze and Guattari’s concept of becoming, and represented in the ideas and practices of a constellation of thinkers inclusive of Gurdjieff, Benjamin, and Trungpa, the article’s view of integration supports radical democracy as presented in the writings of Laclau and Mouffe as a model outcome for social and personal transformational practices.
Theories of central engine for long gamma-ray bursts
Nagataki, Shigehiro
2018-02-01
Long GRBs are the most powerful explosions in the universe since the Big Bang. At least, some fraction of long GRBs are born from the death of massive stars. Likewise, only some fraction of massive stars that satisfy additional special conditions explode as long GRBs associated with supernovae/hypernovae. In this paper, we discuss the explosion mechanism of long GRBs associated with hypernovae: ‘the central engine of long GRBs’. The central engine of long GRBs is very different from that of core-collapse supernovae, although the mechanism of the engine is still not firmly established. In this paper, we review theoretical studies of the central engine of long GRBs. First, we discuss possible progenitor stars. Then several promising mechanisms of the central engine—such as black hole and magnetar formation—will be reviewed. We will also mention some more exotic models. Finally, we describe prospects for future studies of the central engine of long GRBs.
Building an Evaluation Strategy for an Integrated Curriculum in Chemical Engineering
McCarthy, Joseph J.; Parker, Robert S.; Abatan, Adetola; Besterfield-Sacre, Mary
2011-01-01
Increasing knowledge integration has gained wide-spread support as an important goal in engineering education. The Chemical Engineering Pillars curriculum at the University of Pittsburgh, unique for its use of block scheduling, is one of the first four-year, integrated curricula in engineering, and is specifically designed to facilitate knowledge…
Future of Chemical Engineering: Integrating Biology into the Undergraduate ChE Curriculum
Mosto, Patricia; Savelski, Mariano; Farrell, Stephanie H.; Hecht, Gregory B.
2007-01-01
Integrating biology in the chemical engineering curriculum seems to be the future for chemical engineering programs nation and worldwide. Rowan University's efforts to address this need include a unique chemical engineering curriculum with an intensive biology component integrated throughout from freshman to senior years. Freshman and Sophomore…
Motivation Engineering to Employee by Employees Abraham Maslow Theory
Joko Suyono; Sri Wiwoho Mudjanarko
2017-01-01
Among many existing motivational theories, perhaps Maslow's Hierarchy of Needs Theories are widely known. This theory passes a message to us that once a person passes a certain level of need, he is no longer motivated by the level of motivation below. This provides an understanding that a manager or leader or motivator in the organization should know what is needed by subordinates. The need of a daily production worker with staff of managerial staff is different. To provide motivation that ca...
Engineering and industrial design : an integrated interdisciplinary design theory
Brezing, Alexander Nikolaus; Löwer, Manuel
2009-01-01
It is generally accepted that superior products result from a balanced consideration of both “technology” and “aesthetic design”. Nonetheless, the gap between the two professions of the “design engineer“ and the “industrial designer“ has not been bridged since their origination in the course of industrialization [7]. One possible approach to enhance the collaboration of both disciplines is to teach the basics of the respective other’s. In Germany, the main work following this approach of tryi...
Master equations and the theory of stochastic path integrals
Weber, Markus F.; Frey, Erwin
2017-04-01
them. Upon expanding the forward and the backward path integrals around stationary paths, we then discuss and extend a recent method for the computation of rare event probabilities. Besides, we also derive path integral representations for processes with continuous state spaces whose forward and backward master equations admit Kramers-Moyal expansions. A truncation of the backward expansion at the level of a diffusion approximation recovers a classic path integral representation of the (backward) Fokker-Planck equation. One can rewrite this path integral in terms of an Onsager-Machlup function and, for purely diffusive Brownian motion, it simplifies to the path integral of Wiener. To make this review accessible to a broad community, we have used the language of probability theory rather than quantum (field) theory and do not assume any knowledge of the latter. The probabilistic structures underpinning various technical concepts, such as coherent states, the Doi-shift, and normal-ordered observables, are thereby made explicit.
Master equations and the theory of stochastic path integrals.
Weber, Markus F; Frey, Erwin
2017-04-01
expanding the forward and the backward path integrals around stationary paths, we then discuss and extend a recent method for the computation of rare event probabilities. Besides, we also derive path integral representations for processes with continuous state spaces whose forward and backward master equations admit Kramers-Moyal expansions. A truncation of the backward expansion at the level of a diffusion approximation recovers a classic path integral representation of the (backward) Fokker-Planck equation. One can rewrite this path integral in terms of an Onsager-Machlup function and, for purely diffusive Brownian motion, it simplifies to the path integral of Wiener. To make this review accessible to a broad community, we have used the language of probability theory rather than quantum (field) theory and do not assume any knowledge of the latter. The probabilistic structures underpinning various technical concepts, such as coherent states, the Doi-shift, and normal-ordered observables, are thereby made explicit.
Crossover integral equation theory for the liquid structure study
International Nuclear Information System (INIS)
Lai, S.K.; Chen, H.C.
1994-08-01
The main purpose of this work is to report on a calculation that describes the role of the long-range bridge function [H. Iyetomi and S. Ichimaru, Phys. Rev. A 25, 2434 (1982)] as applied to the study of structure of simple liquid metals. It was found here that this bridge function accounts pretty well for the major part of long-range interactions but is physically inadequate for describing the short-range part of liquid structure. To improve on the theory we have drawn attention to the crossover integral equation method which, in essence, amounts to adding to the above bridge function a short-range correction of bridge diagrams. The suggested crossover procedure has been tested for the case of liquid metal Cs. Remarkably good agreement with experiment was obtained confirming our conjecture that the crossover integral equation approach as stressed in this work is potentially an appropriate theory for an accurate study of liquid structure possibly for the supercooled liquid regime. (author). 21 refs, 3 figs
A Web-based modeling tool for the SEMAT Essence theory of software engineering
Directory of Open Access Journals (Sweden)
Daniel Graziotin
2013-09-01
Full Text Available As opposed to more mature subjects, software engineering lacks general theories that establish its foundations as a discipline. The Essence Theory of software engineering (Essence has been proposed by the Software Engineering Methods and Theory (SEMAT initiative. The goal of Essence is to develop a theoretically sound basis for software engineering practice and its wide adoption. However, Essence is far from reaching academic- and industry-wide adoption. The reasons for this include a struggle to foresee its utilization potential and a lack of tools for implementation. SEMAT Accelerator (SematAcc is a Web-positioning tool for a software engineering endeavor, which implements the SEMAT’s Essence kernel. SematAcc permits the use of Essence, thus helping to understand it. The tool enables the teaching, adoption, and research of Essence in controlled experiments and case studies.
Integrating Global Hydrology Into Graduate Engineering Education and Research
Griffis, V. W.
2007-12-01
Worldwide, polluted water affects the health of 1.2 billion people and contributes to the death of 15 million children under five every year. In addition poor environmental quality contributes to 25 per cent of all preventable ill health in the world. To address some of these problems, at the 2002 World Summit on Sustainable Development, the world community set the goal of halving, by the year 2015, the proportion of people without access to safe drinking water and basic sanitation. Solving sanitation and water resource management problems in any part of the world presents an interdisciplinary, complex challenge. However, when we attempt to solve these problems in an international context, our technical approaches must be tempered with cultural sensitivity and extraordinary management strategies. To meet this challenge, Michigan Tech has developed a unique global partnership with the U.S. Peace Corps to address our acknowledgement of the importance of placing engineering solutions in a global context. The program has graduated 30 students. Program enrollment is now over 30 and over 20 countries have hosted our students. The objective of this presentation is to demonstrate how this unique partnership can be integrated with graduate engineering education and research and also show how such a program may attract a more diverse student population into engineering. All graduate students enrolled in our Master's International Program in Civil and Environmental Engineering must complete specific coursework requirements before departing for their international experience. In CE5993 (Field Engineering in the Developing World) students learn to apply concepts of sustainable development and appropriate technology in the developing world. In FW5770 (Rural Community Development Planning and Analysis) students learn how one involves a community in the decision making process. A common theme in both courses is the role of woman in successful development projects. Technical
Glass-based integrated optical splitters: engineering oriented research
Hao, Yinlei; Zheng, Weiwei; Yang, Jianyi; Jiang, Xiaoqing; Wang, Minghua
2010-10-01
Optical splitter is one of most typical device heavily demanded in implementation of Fiber To The Home (FTTH) system. Due to its compatibility with optical fibers, low propagation loss, flexibility, and most distinguishingly, potentially costeffectiveness, glass-based integrated optical splitters made by ion-exchange technology promise to be very attractive in application of optical communication networks. Aiming at integrated optical splitters applied in optical communication network, glass ion-exchange waveguide process is developed, which includes two steps: thermal salts ion-exchange and field-assisted ion-diffusion. By this process, high performance optical splitters are fabricated in specially melted glass substrate. Main performance parameters of these splitters, including maximum insertion loss (IL), polarization dependence loss (PDL), and IL uniformity are all in accordance with corresponding specifications in generic requirements for optic branching components (GR-1209-CORE). In this paper, glass based integrated optical splitters manufacturing is demonstrated, after which, engineering-oriented research work results on glass-based optical splitter are presented.
Capabilities and limitations of predictive engineering theories for multicomponent adsorption
DEFF Research Database (Denmark)
Bartholdy, Sofie; Bjørner, Martin Gamel; Solbraa, Even
2013-01-01
for the prediction of multicomponent adsorption with parameters obtained solely from correlating single gas/solid data. We have tested them over an extensive database with emphasis on polar systems (both gases and solids). The three theories are the multicomponent Langmuir, the ideal adsorbed solution theory (IAST...
Integrating mental health and social development in theory and practice.
Plagerson, Sophie
2015-03-01
In many low and middle income countries, attention to mental illness remains compartmentalized and consigned as a matter for specialist policy. Despite great advances in global mental health, mental health policy and practice dovetail only to a limited degree with social development efforts. They often lag behind broader approaches to health and development. This gap ignores the small but growing evidence that social development unavoidably impacts the mental health of those affected, and that this influence can be both positive and negative. This article examines the theoretical and practical challenges that need to be overcome for a more effective integration of social development and mental health policy. From a theoretical perspective, this article demonstrates compatibility between social development and mental health paradigms. In particular, the capability approach is shown to provide a strong framework for integrating mental health and development. Yet, capability-oriented critiques on 'happiness' have recently been applied to mental health with potentially detrimental outcomes. With regard to policy and practice, horizontal and vertical integration strategies are suggested. Horizontal strategies require stronger devolution of mental health care to the primary care level, more unified messages regarding mental health care provision and the gradual expansion of mental health packages of care. Vertical integration refers to the alignment of mental health with related policy domains (particularly the social, economic and political domains). Evidence from mental health research reinforces aspects of social development theory in a way that can have tangible implications on practice. First, it encourages a focus on avoiding exclusion of those affected by or at risk of mental illness. Secondly, it underscores the importance of the process of implementation as an integral component of successful policies. Finally, by retaining a focus on the individual, it seeks to
Through-life engineering services motivation, theory, and practice
Roy, Rajkumar
2015-01-01
Demonstrating the latest research and analysis in the area of through-life engineering services (TES), this book utilizes case studies and expert analysis from an international array of practitioners and researchers – who together represent multiple manufacturing sectors: aerospace, railway and automotive – to maximize reader insights into the field of through-life engineering services. As part of the EPSRC Centre in Through-life Engineering Services program to support the academic and industrial community, this book presents an overview of non-destructive testing techniques and applications and provides the reader with the information needed to assess degradation and possible automation of through-life engineering service activities . The latest developments in maintenance-repair-overhaul (MRO) are presented with emphasis on cleaning technologies, repair and overhaul approaches and planning and digital assistance. The impact of these technologies on sustainable enterprises is also analyzed. This book wil...
International Nuclear Information System (INIS)
Blau, M.; Thompson, G.
1995-01-01
We review localization techniques for functional integrals which have recently been used to perform calculations in and gain insight into the structure of certain topological field theories and low-dimensional gauge theories. These are the functional integral counterparts of the Mathai-Quillen formalism, the Duistermaat-Heckman theorem, and the Weyl integral formula respectively. In each case, we first introduce the necessary mathematical background (Euler classes of vector bundles, equivariant cohomology, topology of Lie groups), and describe the finite dimensional integration formulae. We then discuss some applications to path integrals and give an overview of the relevant literature. The applications we deal with include supersymmetric quantum mechanics, cohomological field theories, phase space path integrals, and two-dimensional Yang-Mills theory. (author). 83 refs
Molecular and multiscale modeling: review on the theories and applications in chemical engineering
International Nuclear Information System (INIS)
Morales M, Giovanni; Martinez R, Ramiro
2010-01-01
We call molecular modeling to the application of suitable laws in the analysis of phenomena occurred at scales less than those accounted for by the macroscopic world. Such different scales (including micro-, meso- and macro scales), can be linked and integrated in order to improve understanding and predictions of complex physical chemistry phenomena, thus originating a global or multi scale analysis. A considerable amount of chemical engineering phenomena are complex due to the interrelation among these different realms of length and time. Multi scale modeling rises as an alternative for an outstanding mathematical and conceptual representation of such phenomena. This adequate representation may help to design and optimize chemical and petrochemical processes from a microscopic point of view. Herein we present a brief introduction to both molecular and multi scale modeling methods. We also comment and examine opportunities for applying the different levels of modeling to the analysis of industrial problems. The fundamental mathematical machinery of the molecular modelling theories is presented in order to motivate the study of these new engineering tools. Finally, we show a classification of different strategies for applying multilevel analysis, illustrating various examples of each methodology.
Integrated initial training program for a CEGB operations engineer
International Nuclear Information System (INIS)
Tompsett, P.A.
1987-01-01
This paper considers the overall training programs undertaken by a newly appointed Operations Engineer at one of the Central Electricity Generating Board's (CEGB) Advanced Gas Cooled Reactor (AGR) nuclear power stations. The training program is designed to equip him with the skills and knowledge necessary for him to discharge his duties safely and effectively. In order to assist the learning process and achieve and integrated program, aspects of reactor technology and operation, initially the subject of theoretical presentations at the CEGB's Nuclear Power Training Center (NPTC) are reinforced by either simulation and/or practical experience on site. In the later stages plant-specific simulators, operated by trained tutors, are incorporated into the training program to provide the trainee with practical experience of plant operation. The trainee's performance is assessed throughout the program to provide feedback to the trainee, the trainers and station management
An integrated engineering solution in treating tailings pond water (TPW)
Energy Technology Data Exchange (ETDEWEB)
Guo, Z. [Alberta Univ., Edmonton, AB (Canada)
2010-07-01
This presentation described the progress that has been made in the treatment of tailings pond water (TPW). Several treatment technologies were examined for their potential use. Any valid treatment methods must be technically practicable and economically feasible in treating TPW. An integrated TPW treatment process was proposed in this paper after reviewing recent published literature related to TPW treatment. The process was proposed based on knowledge and experience gained from municipal and other industrial water and wastewater treatment operations. This engineered treatment process consists of bioadsorption, bioflocculation, suspended sludge blanket filtration, clarification, ozonation, and coke assisted hybrid biodegradation. The proposed treatment process was aiming at environmental release and/or further reuse of the treated TPW. This proposed treatment process features the reuse of 2 waste materials in order to enhance the treatment efficiency, to increase financial feasibility, and to maximize environmental benefits of the treatment. tabs., figs.
Computer graphics application in the engineering design integration system
Glatt, C. R.; Abel, R. W.; Hirsch, G. N.; Alford, G. E.; Colquitt, W. N.; Stewart, W. A.
1975-01-01
The computer graphics aspect of the Engineering Design Integration (EDIN) system and its application to design problems were discussed. Three basic types of computer graphics may be used with the EDIN system for the evaluation of aerospace vehicles preliminary designs: offline graphics systems using vellum-inking or photographic processes, online graphics systems characterized by direct coupled low cost storage tube terminals with limited interactive capabilities, and a minicomputer based refresh terminal offering highly interactive capabilities. The offline line systems are characterized by high quality (resolution better than 0.254 mm) and slow turnaround (one to four days). The online systems are characterized by low cost, instant visualization of the computer results, slow line speed (300 BAUD), poor hard copy, and the early limitations on vector graphic input capabilities. The recent acquisition of the Adage 330 Graphic Display system has greatly enhanced the potential for interactive computer aided design.
Engineering development studies for integrated evacuated CPC arrays
Winston, R.
1982-04-01
An evacuated tube concentrator which achieves respectable high temperature performance (100 C to 300 C) was developed. The design concept utilizes nonimaging CPC type concentration integrated into each tube by shaping the outer glass vacuum envelope. The detailed design, prototype fabrication and preliminary test measurements are reviewed. In addition the results of this first study specifically devoted to engineering development questions related to practical applications of this collector concept are summarized. Questions having to do with the deployment of medium to large area arrays, optimizations of the manifolding of individual tube panels, selected near term applications (with an emphasis on residential cooling based on Rankine driven chillers) and long term performance projections are addressed.
Opportunities for Launch Site Integrated System Health Engineering and Management
Waterman, Robert D.; Langwost, Patricia E.; Waterman, Susan J.
2005-01-01
The launch site processing flow involves operations such as functional verification, preflight servicing and launch. These operations often include hazards that must be controlled to protect human life and critical space hardware assets. Existing command and control capabilities are limited to simple limit checking durig automated monitoring. Contingency actions are highly dependent on human recognition, decision making, and execution. Many opportunities for Integrated System Health Engineering and Management (ISHEM) exist throughout the processing flow. This paper will present the current human-centered approach to health management as performed today for the shuttle and space station programs. In addition, it will address some of the more critical ISHEM needs, and provide recommendations for future implementation of ISHEM at the launch site.
Challenges and promises of integrating knowledge engineering and qualitative methods
Lundberg, C. Gustav; Holm, Gunilla
Our goal is to expose some of the close ties that exist between knowledge engineering (KE) and qualitative methodology (QM). Many key concepts of qualitative research, for example meaning, commonsense, understanding, and everyday life, overlap with central research concerns in artificial intelligence. These shared interests constitute a largely unexplored avenue for interdisciplinary cooperation. We compare and take some steps toward integrating two historically diverse methodologies by exploring the commonalities of KE and QM both from a substantive and a methodological/technical perspective. In the second part of this essay, we address knowledge acquisition problems and procedures. Knowledge acquisition within KE has been based primarily on cognitive psychology/science foundations, whereas knowledge acquisition within QM has a broader foundation in phenomenology, symbolic interactionism, and ethnomethodology. Our discussion and examples are interdisciplinary in nature. We do not suggest that there is a clash between the KE and QM frameworks, but rather that the lack of communication potentially may limit each framework's future development.
Motivation Engineering to Employee by Employees Abraham Maslow Theory
Directory of Open Access Journals (Sweden)
Joko Suyono
2017-03-01
Full Text Available Among many existing motivational theories, perhaps Maslow's Hierarchy of Needs Theories are widely known. This theory passes a message to us that once a person passes a certain level of need, he is no longer motivated by the level of motivation below. This provides an understanding that a manager or leader or motivator in the organization should know what is needed by subordinates. The need of a daily production worker with staff of managerial staff is different. To provide motivation that can improve performance to both, a motivator must provide different treatment according to their needs.
Kalkani, Efrossini C.; Boussiakou, Iris K.; Boussiakou, Leda G.
2004-01-01
The primary objective of this paper is to apply the educational theories of Kolb's experiential learning and Bloom's educational taxonomy in restructuring the course "Renewable energy engineering". The steps of the research procedure investigate the application of learning theories to the restructuring of the course and the introduction of…
Fluctuation theory of solutions applications in chemistry, chemical engineering, and biophysics
Smith, Paul E
2013-01-01
There are essentially two theories of solutions that can be considered exact: the McMillan-Mayer theory and Fluctuation Solution Theory (FST). The first is mostly limited to solutes at low concentrations, while FST has no such issue. It is an exact theory that can be applied to any stable solution regardless of the number of components and their concentrations, and the types of molecules and their sizes. Fluctuation Theory of Solutions: Applications in Chemistry, Chemical Engineering, and Biophysics outlines the general concepts and theoretical basis of FST and provides a range of applications
Restructuring to Achieve Joint Engineer Integration and Transformation
National Research Council Canada - National Science Library
Kelly, Paul
2003-01-01
.... Increased joint engineer operations, including new homeland defense support requirements, transformation of the joint force, and the growing need for efficient use of scarce engineer resources...
Stochastic integration in Banach spaces theory and applications
Mandrekar, Vidyadhar
2015-01-01
Considering Poisson random measures as the driving sources for stochastic (partial) differential equations allows us to incorporate jumps and to model sudden, unexpected phenomena. By using such equations the present book introduces a new method for modeling the states of complex systems perturbed by random sources over time, such as interest rates in financial markets or temperature distributions in a specific region. It studies properties of the solutions of the stochastic equations, observing the long-term behavior and the sensitivity of the solutions to changes in the initial data. The authors consider an integration theory of measurable and adapted processes in appropriate Banach spaces as well as the non-Gaussian case, whereas most of the literature only focuses on predictable settings in Hilbert spaces. The book is intended for graduate students and researchers in stochastic (partial) differential equations, mathematical finance and non-linear filtering and assumes a knowledge of the required integrati...
Integrating Evolutionary Game Theory into Mechanistic Genotype-Phenotype Mapping.
Zhu, Xuli; Jiang, Libo; Ye, Meixia; Sun, Lidan; Gragnoli, Claudia; Wu, Rongling
2016-05-01
Natural selection has shaped the evolution of organisms toward optimizing their structural and functional design. However, how this universal principle can enhance genotype-phenotype mapping of quantitative traits has remained unexplored. Here we show that the integration of this principle and functional mapping through evolutionary game theory gains new insight into the genetic architecture of complex traits. By viewing phenotype formation as an evolutionary system, we formulate mathematical equations to model the ecological mechanisms that drive the interaction and coordination of its constituent components toward population dynamics and stability. Functional mapping provides a procedure for estimating the genetic parameters that specify the dynamic relationship of competition and cooperation and predicting how genes mediate the evolution of this relationship during trait formation. Copyright © 2016 Elsevier Ltd. All rights reserved.
Integrating financial theory and methods in electricity resource planning
Energy Technology Data Exchange (ETDEWEB)
Felder, F.A. [Economics Resource Group, Cambridge, MA (United States)
1996-02-01
Decision makers throughout the world are introducing risk and market forces in the electric power industry to lower costs and improve services. Incentive based regulation (IBR), which replaces cost of service ratemaking with an approach that divorces costs from revenues, exposes the utility to the risk of profits or losses depending on their performance. Regulators also are allowing for competition within the industry, most notably in the wholesale market and possibly in the retail market. Two financial approaches that incorporate risk in resource planning are evaluated: risk adjusted discount rates (RADR) and options theory (OT). These two complementary approaches are an improvement over the standard present value revenue requirement (PVRR). However, each method has some important limitations. By correctly using RADR and OT and understanding their limitations, decision makers can improve their ability to value risk properly in power plant projects and integrated resource plans. (Author)
Asymptotic series and functional integrals in quantum field theory
International Nuclear Information System (INIS)
Shirkov, D.V.
1979-01-01
Investigations of the methods for analyzing ultra-violet and infrared asymptotics in the quantum field theory (QFT) have been reviewed. A powerful method of the QFT analysis connected with the group property of renormalized transformations has been created at the first stage. The result of the studies of the second period is the constructive solution of the problem of outgoing the framework of weak coupling. At the third stage of studies essential are the asymptotic series and functional integrals in the QFT, which are used for obtaining the asymptotic type of the power expansion coefficients in the coupling constant at high values of the exponents for a number of simple models. Further advance to higher values of the coupling constant requires surmounting the difficulties resulting from the asymptotic character of expansions and a constructive application in the region of strong coupling (g >> 1)
Computational fluid dynamics in fire engineering theory, modelling and practice
Yuen, Kwok Kit
2009-01-01
Fire and combustion presents a significant engineering challenge to mechanical, civil and dedicated fire engineers, as well as specialists in the process and chemical, safety, buildings and structural fields. We are reminded of the tragic outcomes of 'untenable' fire disasters such as at King's Cross underground station or Switzerland's St Gotthard tunnel. In these and many other cases, computational fluid dynamics (CFD) is at the forefront of active research into unravelling the probable causes of fires and helping to design structures and systems to ensure that they are less likely in the f
System integration and performance of the EUV engineering test stand
International Nuclear Information System (INIS)
Tichenor, Daniel A.; Ray-Chaudhuri, Avijit K.; Replogle, William C.; Stulen, Richard H.; Kubiak, Glenn D.; Rockett, Paul D.; Klebanoff, Leonard E.; Jefferson, Karen L.; Leung, Alvin H.; Wronosky, John B.; Hale, Layton C.; Chapman, Henry N.; Taylor, John S.; Folta, James A.; Montcalm, Claude; Soufli, Regina; Spiller, Eberhard; Blaedel, Kenneth; Sommargren, Gary E.; Sweeney, Donald W.; Naulleau, Patrick; Goldberg, Kenneth A.; Gullikson, Eric M.; Bokor, Jeffrey; Batson, Phillip J.; Attwood, David T.; Jackson, Keith H.; Hector, Scott D.; Gwyn, Charles W.; Yan, Pei-Yang; Yan, P.
2001-01-01
The Engineering Test Stand (ETS) is a developmental lithography tool designed to demonstrate full-field EUV imaging and provide data for commercial-tool development. In the first phase of integration, currently in progress, the ETS is configured using a developmental projection system, while fabrication of an improved projection system proceeds in parallel. The optics in the second projection system have been fabricated to tighter specifications for improved resolution and reduced flare. The projection system is a 4-mirror, 4x-reduction, ring-field design having a numeral aperture of 0.1, which supports 70 nm resolution at a k 1 of 0.52. The illuminator produces 13.4 nm radiation from a laser-produced plasma, directs the radiation onto an arc-shaped field of view, and provides an effective fill factor at the pupil plane of 0.7. The ETS is designed for full-field images in step-and-scan mode using vacuum-compatible, magnetically levitated, scanning stages. This paper describes system performance observed during the first phase of integration, including static resist images of 100 nm isolated and dense features
The INGECAD multidisciplinary integrated computer aided engineering system
International Nuclear Information System (INIS)
Kisielewicz, L.T.
1989-01-01
The purpose of this paper is to define the key criteria of an integrated CAE system, and to discuss the solution developed by Ingevision to match these criteria. An information flow model of process plant engineering is presented as a background to the key criteria of CAE systems. This model includes multidisciplinary interfaces and project changes up to the as-built stage. The key quality criteria of CAE systems correspond to managerial issues, such as project control, to technical issues, consistency and quality assurance, and to economical issues, such as cost optimization. The INGECAD system answers these criteria with a tripod nucleus underlying a set of specialized applications. The nucleus includes a Data Base Management System, basic Graphical Tools, and a Decision Support System. The paper overviews the different modules of the INGECAD system emphasizing the general architecture and the basic tools. Specific examples are developed in functional design, cost optimized items selection, and semi-automated routing of piping system. These examples are not intended to illustrate exhaustively the capabilities of the INGECAD system, but rather to highlight some of the advantages the multidisciplinary integration of the system provides to the users. (orig./HP)
A quantum group structure in integrable conformal field theories
International Nuclear Information System (INIS)
Smit, D.J.
1990-01-01
We discuss a quantization prescription of the conformal algebras of a class of d=2 conformal field theories which are integrable. We first give a geometrical construction of certain extensions of the classical Virasoro algebra, known as classical W algebras, in which these algebras arise as the Lie algebra of the second Hamiltonian structure of a generalized Korteweg-de Vries hierarchy. This fact implies that the W algebras, obtained as a reduction with respect to the nilpotent subalgebras of the Kac-Moody algebra, describe the intergrability of a Toda field theory. Subsequently we determine the coadjoint operators of the W algebras, and relate these to classical Yang-Baxter matrices. The quantization of these algebras can be carried out using the concept of a so-called quantum group. We derive the condition under which the representations of these quantum groups admit a Hilbert space completion by exploring the relation with the braid group. Then we consider a modification of the Miura transformation which we use to define a quantum W algebra. This leads to an alternative interpretation of the coset construction for Kac-Moody algebras in terms of nonlinear integrable hierarchies. Subsequently we use the connection between the induced braid group representations and the representations of the mapping class group of Riemann surfaces to identify an action of the W algebras on the moduli space of stable curves, and we give the invariants of this action. This provides a generalization of the situation for the Virasoro algebra, where such an invariant is given by the so-called Mumford form which describes the partition function of the bosonic string. (orig.)
Fetsch, Christopher R; Deangelis, Gregory C; Angelaki, Dora E
2010-05-01
The perception of self-motion is crucial for navigation, spatial orientation and motor control. In particular, estimation of one's direction of translation, or heading, relies heavily on multisensory integration in most natural situations. Visual and nonvisual (e.g., vestibular) information can be used to judge heading, but each modality alone is often insufficient for accurate performance. It is not surprising, then, that visual and vestibular signals converge frequently in the nervous system, and that these signals interact in powerful ways at the level of behavior and perception. Early behavioral studies of visual-vestibular interactions consisted mainly of descriptive accounts of perceptual illusions and qualitative estimation tasks, often with conflicting results. In contrast, cue integration research in other modalities has benefited from the application of rigorous psychophysical techniques, guided by normative models that rest on the foundation of ideal-observer analysis and Bayesian decision theory. Here we review recent experiments that have attempted to harness these so-called optimal cue integration models for the study of self-motion perception. Some of these studies used nonhuman primate subjects, enabling direct comparisons between behavioral performance and simultaneously recorded neuronal activity. The results indicate that humans and monkeys can integrate visual and vestibular heading cues in a manner consistent with optimal integration theory, and that single neurons in the dorsal medial superior temporal area show striking correlates of the behavioral effects. This line of research and other applications of normative cue combination models should continue to shed light on mechanisms of self-motion perception and the neuronal basis of multisensory integration.
Cell Formation in Industrial Engineering : Theory, Algorithms and Experiments
Goldengorin, B.; Krushynskyi, D.; Pardalos, P.M.
2013-01-01
This book focuses on a development of optimal, flexible, and efficient models and algorithms for cell formation in group technology. Its main aim is to provide a reliable tool that can be used by managers and engineers to design manufacturing cells based on their own preferences and constraints
Control Engineering, System Theory and Mathematics: The Teacher's Challenge
Zenger, K.
2007-01-01
The principles, difficulties and challenges in control education are discussed and compared to the similar problems in the teaching of mathematics and systems science in general. The difficulties of today's students to appreciate the classical teaching of engineering disciplines, which are based on rigorous and scientifically sound grounds, are…
Integral Transport Theory in One-dimensional Geometries
Energy Technology Data Exchange (ETDEWEB)
Carlvik, I
1966-06-15
A method called DIT (Discrete Integral Transport) has been developed for the numerical solution of the transport equation in one-dimensional systems. The characteristic features of the method are Gaussian integration over the coordinate as described by Kobayashi and Nishihara, and a particular scheme for the calculation of matrix elements in annular and spherical geometry that has been used for collision probabilities in earlier Flurig programmes. The paper gives a general theory including such things as anisotropic scattering and multi-pole fluxes, and it gives a brief description of the Flurig scheme. Annular geometry is treated in some detail, and corresponding formulae are given for spherical and plane geometry. There are many similarities between DIT and the method of collision probabilities. DIT is in many cases faster, because for a certain accuracy in the fluxes DIT often needs fewer space points than the method of collision probabilities needs regions. Several computer codes using DIT, both one-group and multigroup, have been written. It is anticipated that experience gained in calculations with these codes will be reported in another paper.
Sensitivity calculations of integral parameters by a generalyzed perturbation theory
International Nuclear Information System (INIS)
Santo, A.C.F. de.
1981-12-01
In this work, we first revise some concepts, concerning the neutron transport in nuclear systems. We derive the balance and importance equation. Then we discuss the neutron importance in subcritical, critical and supercritical systems. The adjoint flux is estabilished as the neutron importance for the fission process. The conventional perturbation theory is later presented. We developed a sistematic perturbative formulation in the first order variation in the distribution functions calculate the reactivity due to a system perturbation. We present in detail the flux difference and generalized functions methos. The above formulation is then extended for altered systems. We consider integral parameters of the type ratio of bilinear functionals (for which the reactivity is a particular case). We define sensitivity coeficients, for any integral parameter, corresponding to a especific system alterations. Possible aplication of the method are also discussed. In the last part of this work, we apply the perturbative formulation to the doppler reacitivity sensibility calculation, utilizing the generalized functions method. We describe in detail the compiler program written for this and some other possible aplications. (Author) [pt
Modern integral equation techniques for quantum reactive scattering theory
International Nuclear Information System (INIS)
Auerbach, S.M.
1993-11-01
Rigorous calculations of cross sections and rate constants for elementary gas phase chemical reactions are performed for comparison with experiment, to ensure that our picture of the chemical reaction is complete. We focus on the H/D+H 2 → H 2 /DH + H reaction, and use the time independent integral equation technique in quantum reactive scattering theory. We examine the sensitivity of H+H 2 state resolved integral cross sections σ v'j',vj (E) for the transitions (v = 0,j = 0) to (v' = 1,j' = 1,3), to the difference between the Liu-Siegbahn-Truhlar-Horowitz (LSTH) and double many body expansion (DMBE) ab initio potential energy surfaces (PES). This sensitivity analysis is performed to determine the origin of a large discrepancy between experimental cross sections with sharply peaked energy dependence and theoretical ones with smooth energy dependence. We find that the LSTH and DMBE PESs give virtually identical cross sections, which lends credence to the theoretical energy dependence
Hasking, Penelope; Boyes, Mark; Mullan, Barbara
2015-01-01
Both Reinforcement Sensitivity Theory and Social Cognitive Theory have been applied to understanding drinking behavior. We propose that theoretical relationships between these models support an integrated approach to understanding alcohol use and misuse. We aimed to test an integrated model in which the relationships between reward sensitivity and drinking behavior (alcohol consumption, alcohol-related problems, and symptoms of dependence) were mediated by alcohol expectancies and drinking refusal self-efficacy. Online questionnaires assessing the constructs of interest were completed by 443 Australian adults (M age = 26.40, sd = 1.83) in 2013 and 2014. Path analysis revealed both direct and indirect effects and implicated two pathways to drinking behavior with differential outcomes. Drinking refusal self-efficacy both in social situations and for emotional relief was related to alcohol consumption. Sensitivity to reward was associated with alcohol-related problems, but operated through expectations of increased confidence and personal belief in the ability to limit drinking in social situations. Conversely, sensitivity to punishment operated through negative expectancies and drinking refusal self-efficacy for emotional relief to predict symptoms of dependence. Two pathways relating reward sensitivity, alcohol expectancies, and drinking refusal self-efficacy may underlie social and dependent drinking, which has implications for development of intervention to limit harmful drinking.
An Integrative Bio-Psycho-Social Theory of Anorexia Nervosa.
Munro, Calum; Randell, Louise; Lawrie, Stephen M
2017-01-01
The need for novel approaches to understanding and treating anorexia nervosa (AN) is well recognized. The aim of this paper is to describe an integrative bio-psycho-social theory of maintaining factors in AN. We took a triangulation approach to develop a clinically relevant theory with face validity and internal consistency. We developed theoretical ideas from our clinical practice and reviewed theoretical ideas within the eating disorders and wider bio-psycho-social literature. The synthesis of these ideas and concepts into a clinically meaningful framework is described here. We suggest eight key factors central to understanding the maintenance and treatment resistance of anorexia nervosa: genetic or experiential predisposing factors; dysfunctional feelings processing and regulation systems; excessive vulnerable feelings; 'feared self' beliefs; starvation as a maladaptive physiological feelings regulation mechanism; maladaptive psychological coping modes; maladaptive social behaviour; and unmet physical and psychological core needs. Each of these factors serves to maintain the disorder. The concept of universal physical and psychological core needs can provide an underpinning integrative framework for working with this distinctly physical and psychological disorder. This framework could be used within any treatment model. We suggest that treatments which help address the profound lack of trust, emotional security and self-acceptance in this patient group will in turn address unmet needs and improve well-being. Copyright © 2016 John Wiley & Sons, Ltd. The concept of unmet physical and psychological needs can be used as an underlying integrative framework for understanding and working with this patient group, alongside any treatment model. A functional understanding of the neuro-biological, physiological and psychological mechanisms involved in anorexia nervosa can help patients reduce self-criticism and shame. Fears about being or becoming fat, greedy, needy
The Attention Schema Theory: A Foundation for Engineering Artificial Consciousness
Directory of Open Access Journals (Sweden)
Michael S. A. Graziano
2017-11-01
Full Text Available The purpose of the attention schema theory is to explain how an information-processing device, the brain, arrives at the claim that it possesses a non-physical, subjective awareness and assigns a high degree of certainty to that extraordinary claim. The theory does not address how the brain might actually possess a non-physical essence. It is not a theory that deals in the non-physical. It is about the computations that cause a machine to make a claim and to assign a high degree of certainty to the claim. The theory is offered as a possible starting point for building artificial consciousness. Given current technology, it should be possible to build a machine that contains a rich internal model of what consciousness is, attributes that property of consciousness to itself and to the people it interacts with, and uses that attribution to make predictions about human behavior. Such a machine would “believe” it is conscious and act like it is conscious, in the same sense that the human machine believes and acts.
Scale relativity theory and integrative systems biology: 2. Macroscopic quantum-type mechanics.
Nottale, Laurent; Auffray, Charles
2008-05-01
In these two companion papers, we provide an overview and a brief history of the multiple roots, current developments and recent advances of integrative systems biology and identify multiscale integration as its grand challenge. Then we introduce the fundamental principles and the successive steps that have been followed in the construction of the scale relativity theory, which aims at describing the effects of a non-differentiable and fractal (i.e., explicitly scale dependent) geometry of space-time. The first paper of this series was devoted, in this new framework, to the construction from first principles of scale laws of increasing complexity, and to the discussion of some tentative applications of these laws to biological systems. In this second review and perspective paper, we describe the effects induced by the internal fractal structures of trajectories on motion in standard space. Their main consequence is the transformation of classical dynamics into a generalized, quantum-like self-organized dynamics. A Schrödinger-type equation is derived as an integral of the geodesic equation in a fractal space. We then indicate how gauge fields can be constructed from a geometric re-interpretation of gauge transformations as scale transformations in fractal space-time. Finally, we introduce a new tentative development of the theory, in which quantum laws would hold also in scale space, introducing complexergy as a measure of organizational complexity. Initial possible applications of this extended framework to the processes of morphogenesis and the emergence of prokaryotic and eukaryotic cellular structures are discussed. Having founded elements of the evolutionary, developmental, biochemical and cellular theories on the first principles of scale relativity theory, we introduce proposals for the construction of an integrative theory of life and for the design and implementation of novel macroscopic quantum-type experiments and devices, and discuss their potential
Computational intelligence in time series forecasting theory and engineering applications
Palit, Ajoy K
2005-01-01
Foresight in an engineering enterprise can make the difference between success and failure, and can be vital to the effective control of industrial systems. Applying time series analysis in the on-line milieu of most industrial plants has been problematic owing to the time and computational effort required. The advent of soft computing tools offers a solution. The authors harness the power of intelligent technologies individually and in combination. Examples of the particular systems and processes susceptible to each technique are investigated, cultivating a comprehensive exposition of the improvements on offer in quality, model building and predictive control and the selection of appropriate tools from the plethora available. Application-oriented engineers in process control, manufacturing, production industry and research centres will find much to interest them in this book. It is suitable for industrial training purposes, as well as serving as valuable reference material for experimental researchers.
Introduction to functional and path integral methods in quantum field theory
International Nuclear Information System (INIS)
Strathdee, J.
1991-11-01
The following aspects concerning the use of functional and path integral methods in quantum field theory are discussed: generating functionals and the effective action, perturbation series, Yang-Mills theory and BRST symmetry. 10 refs, 3 figs
Convex integration theory solutions to the h-principle in geometry and topology
Spring, David
1998-01-01
This book provides a comprehensive study of convex integration theory in immersion-theoretic topology. Convex integration theory, developed originally by M. Gromov, provides general topological methods for solving the h-principle for a wide variety of problems in differential geometry and topology, with applications also to PDE theory and to optimal control theory. Though topological in nature, the theory is based on a precise analytical approximation result for higher order derivatives of functions, proved by M. Gromov. This book is the first to present an exacting record and exposition of all of the basic concepts and technical results of convex integration theory in higher order jet spaces, including the theory of iterated convex hull extensions and the theory of relative h-principles. A second feature of the book is its detailed presentation of applications of the general theory to topics in symplectic topology, divergence free vector fields on 3-manifolds, isometric immersions, totally real embeddings, u...
An integrated optimization for organic Rankine cycle based on entransy theory and thermodynamics
International Nuclear Information System (INIS)
Li, Tailu; Fu, Wencheng; Zhu, Jialing
2014-01-01
The organic Rankine cycle has been one of the essential heat-work conversion technologies nowadays. Lots of effectual optimization methods are focused on the promotion of the system efficiency, which are mainly relied on engineering experience and numerical simulations rather than theoretical analysis. A theoretical integrated optimization method was established based on the entransy theory and thermodynamics, with the ratio of the net power output to the ratio of the total thermal conductance to the thermal conductance in the condenser as the objective function. The system parameters besides the optimal pinch point temperature difference were obtained. The results show that the mass flow rate of the working fluid is inversely proportional to the evaporating temperature. An optimal evaporating temperature maximizes the net power output, and the maximal net power output corresponds to the maximal entransy loss and the change points of the heat source outlet temperature and the change rates for the entropy generation and the entransy dissipation. Moreover, the net power output and the total thermal conductance are inversely proportional to the pinch point temperature difference, contradicting with each other. Under the specified condition, the optimal operating parameters are ascertained, with the optimal pinch point temperature difference of 5 K. - Highlights: • We establish an integrated optimization model for organic Rankine cycle. • The model combines the entransy theory with thermodynamics. • The maximal net power output corresponds to the maximal entransy loss. • The pinch point temperature difference is optimized to be 5 K
National Research Council Canada - National Science Library
2002-01-01
.... Concepts covered by this model include systems engineering, software engineering, integrated product and process development, and supplier sourcing as well as traditional CMM concepts such as process...
An Overview of the CapDEM Integrated Engineering Environment
National Research Council Canada - National Science Library
Lam, Sylvia; Poursina, Shiva; Spafford, Tim
2005-01-01
In order to gain a better understanding of the approach and the technology requirements to support collaborative engineering activities, the Collaborative Capability Definition, Engineering and Management (CapDEM...
Grid Integration Science, NREL Power Systems Engineering Center
Energy Technology Data Exchange (ETDEWEB)
Kroposki, Benjamin [National Renewable Energy Lab. (NREL), Golden, CO (United States)
2017-04-25
This report highlights journal articles published in 2016 by researchers in the Power Systems Engineering Center. NREL's Power Systems Engineering Center published 47 journal and magazine articles in the past year, highlighting recent research in grid modernization.
Integration of Sustainability in Engineering Education: Why Is PBL an Answer?
Guerra, Aida
2017-01-01
Purpose: Education for sustainable development (ESD) is one of the challenges engineering education currently faces. Engineering education needs to revise and change its curriculum to integrate ESD principles and knowledge. Problem based learning (PBL) has been one of the main learning pedagogies used to integrate sustainability in engineering…
Dare, Emily A.; Ellis, Joshua A.; Roehrig, Gillian H.
2014-01-01
It is difficult to ignore the increased use of technological innovations in today's world, which has led to various calls for the integration of engineering into K-12 science standards. The need to understand how engineering is currently being brought to science classrooms is apparent and necessary in order to address these calls for integration.…
Integrated modeling tool for performance engineering of complex computer systems
Wright, Gary; Ball, Duane; Hoyt, Susan; Steele, Oscar
1989-01-01
This report summarizes Advanced System Technologies' accomplishments on the Phase 2 SBIR contract NAS7-995. The technical objectives of the report are: (1) to develop an evaluation version of a graphical, integrated modeling language according to the specification resulting from the Phase 2 research; and (2) to determine the degree to which the language meets its objectives by evaluating ease of use, utility of two sets of performance predictions, and the power of the language constructs. The technical approach followed to meet these objectives was to design, develop, and test an evaluation prototype of a graphical, performance prediction tool. The utility of the prototype was then evaluated by applying it to a variety of test cases found in the literature and in AST case histories. Numerous models were constructed and successfully tested. The major conclusion of this Phase 2 SBIR research and development effort is that complex, real-time computer systems can be specified in a non-procedural manner using combinations of icons, windows, menus, and dialogs. Such a specification technique provides an interface that system designers and architects find natural and easy to use. In addition, PEDESTAL's multiview approach provides system engineers with the capability to perform the trade-offs necessary to produce a design that meets timing performance requirements. Sample system designs analyzed during the development effort showed that models could be constructed in a fraction of the time required by non-visual system design capture tools.
Integrated Heat Exchange For Recuperation In Gas Turbine Engines
2016-12-01
combustion engines conduct heat transfer in the exhaust system. The exhaust valves have hollow stems containing sodium, which act as heat pipes with...is the use of heat pipes in internal combustion engines . Internal combustion engines have combustion chambers with temperatures as high as 2700 K...accomplished using evaporative heat pipes . This study explores the feasibility of embedding this heat exchange system within engines using a
International Nuclear Information System (INIS)
Bach, A.
1981-01-01
A representation of quantum mechanics in terms of classical probability theory by means of integration in Hilbert space is discussed. This formal hidden-variables representation is analysed in the context of impossibility proofs concerning hidden-variables theories. The structural analogy of this formulation of quantum theory with classical statistical mechanics is used to elucidate the difference between classical mechanics and quantum mechanics. (author)
Integrable Scalar Cosmologies I. Foundations and links with String Theory
Fré, P.; Sagnotti, A.; Sorin, A. S.
2013-12-01
encouraging results that find a rationale in the ascertained behavior of corresponding two-dimensional dynamical systems.The structure of the paper is as follows. In Section 2 we derive an effective dynamical model that encompasses the possible d-dimensional Friedman-Lemaitre-Robertson-Walker (FLRW) spatially flat cosmologies driven by a scalar field ϕ with canonical kinetic term and self interaction produced by a potential function V(ϕ). In Section 3 we describe the methods used to build integrable dynamical systems and identify nine different families of one-scalar cosmologies that are integrable for suitable choices of the gauge function B(t) of Eq. (1.1). In Section 4 we analyze the generic properties of dynamical systems in two variables, we describe the general classification of their fixed points and we illustrate the corresponding behavior of the solutions of Section 3. We then discuss in detail the exact solutions of several particularly significant systems identified in Section 3 and illustrate a number of instructive lessons that can be drawn from them. In Section 5.1 we describe the gross features of 26 additional sporadic potentials and elaborate on the qualitative behavior of their solutions, on the basis of the key lessons drawn from the simpler examples of Section 4. We also elaborate briefly on the links with other integrable systems. In Section 6 we illustrate how exponential potentials accompany in String Theory a mechanism for supersymmetry breaking brought about by classically stable vacuum configurations of D branes and orientifolds with broken supersymmetry and discuss their behavior in lower dimensions. Under some assumptions that are spelled out in Section 6, we also describe the types of exponential potentials that can emerge, in four dimensions, from various types of branes present in String Theory. Insofar as possible, we work in a generic number of dimensions, but with critical superstrings in our mind, so that in most of the paper 4⩽d⩽10
Curriculum: Integrating Health and Safety Into Engineering Curricula.
Talty, John T.
1985-01-01
National Institute for Occupational Safety and Health instituted a project in 1980 to encourage engineering educators to focus on occupational safety and health issues in engineering curricula. Progress to date is outlined, considering specific results in curriculum development, engineering society interaction, and formation of a teaching…
Integrating system safety into the basic systems engineering process
Griswold, J. W.
1971-01-01
The basic elements of a systems engineering process are given along with a detailed description of what the safety system requires from the systems engineering process. Also discussed is the safety that the system provides to other subfunctions of systems engineering.
The necessity of a theory of biology for tissue engineering: metabolism-repair systems.
Ganguli, Suman; Hunt, C Anthony
2004-01-01
Since there is no widely accepted global theory of biology, tissue engineering and bioengineering lack a theoretical understanding of the systems being engineered. By default, tissue engineering operates with a "reductionist" theoretical approach, inherited from traditional engineering of non-living materials. Long term, that approach is inadequate, since it ignores essential aspects of biology. Metabolism-repair systems are a theoretical framework which explicitly represents two "functional" aspects of living organisms: self-repair and self-replication. Since repair and replication are central to tissue engineering, we advance metabolism-repair systems as a potential theoretical framework for tissue engineering. We present an overview of the framework, and indicate directions to pursue for extending it to the context of tissue engineering. We focus on biological networks, both metabolic and cellular, as one such direction. The construction of these networks, in turn, depends on biological protocols. Together these concepts may help point the way to a global theory of biology appropriate for tissue engineering.
Vansteenkiste, Maarten; Sheldon, Kennon M
2006-03-01
In this article we compare and integrate two well-established approaches to motivating therapeutic change, namely self-determination theory (SDT; Deci & Ryan, 1985, ) and motivational interviewing (MI; Miller & Rollnick, 1991, ). We show that SDT's theoretical focus on the internalization of therapeutic change and on the issue of need-satisfaction is fully compatible with key principles and clinical strategies within MI. We further suggest that basic need-satisfaction might be an important mechanism accounting for the positive effects of MI. Conversely, MI principles may provide SDT researchers with new insight into the application of SDT's theoretical concept of autonomy-support, and suggest new ways of testing and developing SDT. In short, the applied approach of MI and the theoretical approach of SDT might be fruitfully married, to the benefit of both.
Distribution theory with applications in engineering and physics
Teodorescu, Petre P; Toma, Antonela
2013-01-01
In this comprehensive monograph, the authors apply modern mathematical methods to the study of mechanical and physical phenomena or techniques in acoustics, optics, and electrostatics, where classical mathematical tools fail.They present a general method of approaching problems, pointing out different aspects and difficulties that may occur. With respect to the theory of distributions, only the results and the principle theorems are given as well as some mathematical results. The book also systematically deals with a large number of applications to problems of general Newtonian mechanics,
An Integrated Neuroscience and Engineering Approach to Classifying Human Brain-States
2015-12-22
AFRL-AFOSR-VA-TR-2016-0037 An Integrated Neuroscience and Engineering Approach to Classifying Human Brain-States Adrian Lee UNIVERSITY OF WASHINGTON...to 14-09-2015 4. TITLE AND SUBTITLE An Integrated Neuroscience and Engineering Approach to Classifying Human Brain- States 5a. CONTRACT NUMBER 5b...specific cognitive states remains elusive, owing perhaps to limited crosstalk between the fields of neuroscience and engineering. Here, we report a
Hillebrandt, Annika; Barclay, Laurie J
2017-05-01
Studies have indicated that observers can infer information about others' behavioral intentions from others' emotions and use this information in making their own decisions. Integrating emotions as social information (EASI) theory and attribution theory, we argue that the interpersonal effects of emotions are not only influenced by the type of discrete emotion (e.g., anger vs. happiness) but also by the target of the emotion (i.e., how the emotion relates to the situation). We compare the interpersonal effects of emotions that are integral (i.e., related to the situation) versus incidental (i.e., lacking a clear target in the situation) in a negotiation context. Results from 4 studies support our general argument that the target of an opponent's emotion influences the degree to which observers attribute the emotion to their own behavior. These attributions influence observers' inferences regarding the perceived threat of an impasse or cooperativeness of an opponent, which can motivate observers to strategically adjust their behavior. Specifically, emotion target influenced concessions for both anger and happiness (Study 1, N = 254), with perceived threat and cooperativeness mediating the effects of anger and happiness, respectively (Study 2, N = 280). Study 3 (N = 314) demonstrated the mediating role of attributions and moderating role of need for closure. Study 4 (N = 193) outlined how observers' need for cognitive closure influences how they attribute incidental anger. We discuss theoretical implications related to the social influence of emotions as well as practical implications related to the impact of personality on negotiators' biases and behaviors. (PsycINFO Database Record (c) 2017 APA, all rights reserved).
Contour integral representations for the characters of rational conformal field theories
International Nuclear Information System (INIS)
Mukhi, S.; Panda, S.; Sen, A.
1989-01-01
We propose simple Feigin-Fuchs contour integral representations for the characters of a large class of rational conformal field theories. These include the A, D and E series SU(2) WZW theories, the A and D series c<1 minimal theories, and the k=1 SU(N) WZW theories. All these theories are characterized by the absence of the zeroes in the wronskian determinant of the characters in the interior of moduli space. This proposal is verified by several calculations. (orig.)
BUSINESS MANAGEMENT THEORY DEVELOPED ON THE BASIS OF SYSTEM APPROACH AND BUSINESS ENGINEERING TOOLS
Directory of Open Access Journals (Sweden)
N. I. Strich
2011-01-01
Full Text Available Management should be carried out with due account of the system theory and using tools and opportunities offered by such modern management components as business engineering and reengineering. Main points of this theory are given along with detailed determination of business engineering and reengineering particularly efficient while determining measures needed to reorganize an enterprise (or a group of enterprises through updating its organizational structure as well as economic, personnel or other system. Out-sourcing also described in detail is considered as modern enterprise management system’s most efficient instrument.
2nd International Conference on Advanced Engineering : Theory and Applications
Dao, Tran; Zelinka, Ivan; Choi, Hyeung-Sik; Chadli, Mohammed
2016-01-01
This proceeding book consists of 10 topical areas of selected papers like: telecommunication, power systems, robotics, control system, renewable energy, power electronics, computer science and more. All selected papers represent interesting ideas and state of the art overview. Readers will find interesting papers of those areas about design and implement of dynamic positioning control system for USV, scheduling problems, motor control, backtracking search algorithm for distribution network and others. All selected papers represent interesting ideas and state of art overview. The proceeding book will also be a resource and material for practitioners who want to apply discussed problems to solve real-life problems in their challenging applications. It is also devoted to the studies of common and related subjects in intensive research fields of modern electric, electronic and related technologies. For these reasons, we believe that this proceeding book will be useful for scientists and engineers working in the ...
Peterman, Karen; Daugherty, Jenny L.; Custer, Rodney L.; Ross, Julia M.
2017-01-01
Science teachers are being called on to incorporate engineering practices into their classrooms. This study explores whether the Engineering-Infused Lesson Rubric, a new rubric designed to target best practices in engineering education, could be used to evaluate the extent to which engineering is infused into online science lessons. Eighty lessons…
Symmetries of Maldacena-Wilson loops from integrable string theory
International Nuclear Information System (INIS)
Muenkler, Hagen
2017-01-01
This thesis discusses hidden symmetries within N=4 supersymmetric Yang-Mills theory or its AdS/CFT dual, string theory in AdS 5 x S 5 . Here, we focus on the Maldacena-Wilson loop, which is a suitable object for this study since its vacuum expectation value is finite for smooth contours and the conjectured duality to scattering amplitudes provides a conceptual path to transfer its symmetries to other observables. Its strong-coupling description via minimal surfaces in AdS 5 allows to construct the symmetries from the integrability of the underlying classical string theory. This approach has been utilized before to derive a strong-coupling Yangian symmetry of the Maldacena-Wilson loop and describe equiareal deformations of minimal surfaces in AdS 3 . These two findings are connected and extended in the present thesis. In order to discuss the symmetries systematically, we first discuss the symmetry structure of the underlying string model. The discussion can be generalized to the discussion of generic symmetric space models. For these, we find that the symmetry which generates the equiareal deformations of minimal surfaces in AdS 3 has a central role in the symmetry structure of the model: It acts as a raising operator on the infinite tower of conserved charges, thus generating the spectral parameter, and can be employed to construct all symmetry variations from the global symmetry of the model. It is thus referred to as the master symmetry of symmetric space models. Additionally, the algebra of the symmetry variations and the conserved charges is worked out. For the concrete case of minimal surfaces in AdS 5 , we discuss the deformation of the four-cusp solution, which provides the dual description of the four-gluon scattering amplitude. This marks the first step toward transferring the master symmetry to scattering amplitudes. Moreover, we compute the master and Yangian symmetry variations of generic, smooth boundary curves. The results leads to a coupling
Symmetries of Maldacena-Wilson loops from integrable string theory
Energy Technology Data Exchange (ETDEWEB)
Muenkler, Hagen
2017-09-11
This thesis discusses hidden symmetries within N=4 supersymmetric Yang-Mills theory or its AdS/CFT dual, string theory in AdS{sub 5} x S{sup 5}. Here, we focus on the Maldacena-Wilson loop, which is a suitable object for this study since its vacuum expectation value is finite for smooth contours and the conjectured duality to scattering amplitudes provides a conceptual path to transfer its symmetries to other observables. Its strong-coupling description via minimal surfaces in AdS{sub 5} allows to construct the symmetries from the integrability of the underlying classical string theory. This approach has been utilized before to derive a strong-coupling Yangian symmetry of the Maldacena-Wilson loop and describe equiareal deformations of minimal surfaces in AdS{sub 3}. These two findings are connected and extended in the present thesis. In order to discuss the symmetries systematically, we first discuss the symmetry structure of the underlying string model. The discussion can be generalized to the discussion of generic symmetric space models. For these, we find that the symmetry which generates the equiareal deformations of minimal surfaces in AdS{sub 3} has a central role in the symmetry structure of the model: It acts as a raising operator on the infinite tower of conserved charges, thus generating the spectral parameter, and can be employed to construct all symmetry variations from the global symmetry of the model. It is thus referred to as the master symmetry of symmetric space models. Additionally, the algebra of the symmetry variations and the conserved charges is worked out. For the concrete case of minimal surfaces in AdS{sub 5}, we discuss the deformation of the four-cusp solution, which provides the dual description of the four-gluon scattering amplitude. This marks the first step toward transferring the master symmetry to scattering amplitudes. Moreover, we compute the master and Yangian symmetry variations of generic, smooth boundary curves. The results
SAFSIM theory manual: A computer program for the engineering simulation of flow systems
Energy Technology Data Exchange (ETDEWEB)
Dobranich, D.
1993-12-01
SAFSIM (System Analysis Flow SIMulator) is a FORTRAN computer program for simulating the integrated performance of complex flow systems. SAFSIM provides sufficient versatility to allow the engineering simulation of almost any system, from a backyard sprinkler system to a clustered nuclear reactor propulsion system. In addition to versatility, speed and robustness are primary SAFSIM development goals. SAFSIM contains three basic physics modules: (1) a fluid mechanics module with flow network capability; (2) a structure heat transfer module with multiple convection and radiation exchange surface capability; and (3) a point reactor dynamics module with reactivity feedback and decay heat capability. Any or all of the physics modules can be implemented, as the problem dictates. SAFSIM can be used for compressible and incompressible, single-phase, multicomponent flow systems. Both the fluid mechanics and structure heat transfer modules employ a one-dimensional finite element modeling approach. This document contains a description of the theory incorporated in SAFSIM, including the governing equations, the numerical methods, and the overall system solution strategies.
On N = 1 gauge models from geometric engineering in M-theory
International Nuclear Information System (INIS)
Belhaj, A; Drissi, L B; Rasmussen, J
2003-01-01
We study geometric engineering of four-dimensional N = 1 gauge models from M-theory on a seven-dimensional manifold with G 2 holonomy. The manifold is constructed as a K3 fibration over a three-dimensional base space with ADE geometry. The resulting gauge theory is discussed in the realm of (p, q) webs. We discuss how the anomaly cancellation condition translates into a condition on the associated affine ADE Lie algebras
Job Satisfaction: A Possible Integration of Two Theories
Hazer, John T.
1976-01-01
A rationale for deciding which motivation methods to use for employees who have differing levels of satisfaction. Discusses pros and cons of two theories on job satisfaction--Herzberg's theory and the traditional theory--suggesting strongly a need to combine both ideas. (WL)
Cognitive Load Theory: New Conceptualizations, Specifications, and Integrated Research Perspectives
Paas, Fred; van Gog, Tamara; Sweller, John
2010-01-01
Over the last few years, cognitive load theory has progressed and advanced rapidly. The articles in this special issue, which document those advances, are based on contributions to the 3rd International Cognitive Load Theory Conference (2009), Heerlen, The Netherlands. The articles of this special issue on cognitive load theory discuss new…
Introduction to Integral Calculus Systematic Studies with Engineering Applications for Beginners
Rohde, Ulrich L; Poddar, Ajay K; Ghosh, A K
2011-01-01
An accessible introduction to the fundamentals of calculus needed to solve current problems in engineering and the physical sciences I ntegration is an important function of calculus, and Introduction to Integral Calculus combines fundamental concepts with scientific problems to develop intuition and skills for solving mathematical problems related to engineering and the physical sciences. The authors provide a solid introduction to integral calculus and feature applications of integration, solutions of differential equations, and evaluation methods. With logical organization coupled with cle
THE CONCEPT OF INTEGRATED ENGINEERING AND BUSINESS (EB EDUCATION SYSTEM
Directory of Open Access Journals (Sweden)
Michał Charlak
2013-12-01
Full Text Available In our approach to engineering and business education system an engineer is a man working as creator and user of technical products. We stress that the process of understanding and gaining knowledge of technical reality and creativity of engineers are the essential for EB concept . Next, we describe briefly three perspectives for building the system of innovative product origination as a basis for EB system: 1 designer’s perspective; 2 business perspective. 3 consumer perspective.
Theory and (In) Practice: The Problem of Integration in Art and Design Education
Rintoul, Jenny Ruth
2014-01-01
This paper examines the relationship between art "theory" and art "practice" in British art education at post-compulsory level, with a focus on the ways in which theory is framed and delivered and what this means for its integration. Drawing upon constructions of knowledge and approaches to integration as a technique and…
Directory of Open Access Journals (Sweden)
Joe Manganelli
2016-10-01
Full Text Available This paper presents reflections on integrating theory, craft, research, and practice to improve the accuracy and resiliency of each. The reflections build toward a set of statements about the value and the cost of integrating theory, craft, research, and practice. Specifically, the authors offer the Privileged Work / Non-Privileged Work Framework and concept of cultivating Perspectival Acuity.
Taatgen, Niels A.; van Rijn, Hedderik; Anderson, John
2007-01-01
A theory of prospective time perception is introduced and incorporated as a module in an integrated theory of cognition, thereby extending existing theories and allowing predictions about attention and learning. First, a time perception module is established by fitting existing datasets (interval estimation and bisection and impact of secondary…
Taatgen, Niels A.; van Rijn, Hedderik; Anderson, John
A theory of prospective time perception is introduced and incorporated as a module in an integrated theory of cognition, thereby extending existing theories and allowing predictions about attention and learning. First, a time perception module is established by fitting existing datasets (interval
Muskhelishvili, N I
2011-01-01
Singular integral equations play important roles in physics and theoretical mechanics, particularly in the areas of elasticity, aerodynamics, and unsteady aerofoil theory. They are highly effective in solving boundary problems occurring in the theory of functions of a complex variable, potential theory, the theory of elasticity, and the theory of fluid mechanics.This high-level treatment by a noted mathematician considers one-dimensional singular integral equations involving Cauchy principal values. Its coverage includes such topics as the Hölder condition, Hilbert and Riemann-Hilbert problem
A Triangular Approach to Integrate Research, Education and Practice in Higher Engineering Education
Heikkinen, Eetu-Pekka; Jaako, Juha; Hiltunen, Jukka
2017-01-01
Separate approaches in engineering education, research and practice are not very useful when preparing students for working life; instead, integration of education, research and industrial practices is needed. A triangular approach (TA) as a method to accomplish this integration and as a method to provide students with integrated expertise is…
Assessing Cognitive Load Theory to Improve Student Learning for Mechanical Engineers
Impelluso, Thomas J.
2009-01-01
A computer programming class for students of mechanical engineering was redesigned and assessed: Cognitive Load Theory was used to redesign the content; online technologies were used to redesign the delivery. Student learning improved and the dropout rate was reduced. This article reports on both attitudinal and objective assessment: comparing…
Experiences with Integrating Simulation into a Software Engineering Curriculum
Bollin, Andreas; Hochmuller, Elke; Mittermeir, Roland; Samuelis, Ladislav
2012-01-01
Software Engineering education must account for a broad spectrum of knowledge and skills software engineers will be required to apply throughout their professional life. Covering all the topics in depth within a university setting is infeasible due to curricular constraints as well as due to the inherent differences between educational…
Integrating Surface Modeling into the Engineering Design Graphics Curriculum
Hartman, Nathan W.
2006-01-01
It has been suggested there is a knowledge base that surrounds the use of 3D modeling within the engineering design process and correspondingly within engineering design graphics education. While solid modeling receives a great deal of attention and discussion relative to curriculum efforts, and rightly so, surface modeling is an equally viable 3D…
Integration, Authenticity, and Relevancy in College Science through Engineering Design
Turner, Ken L., Jr.; Hoffman, Adam R.
2018-01-01
Engineering design is an ideal perspective for engaging students in college science classes. An engineering design problem-solving framework was used to create a general chemistry lab activity focused on an important environmental issue--dead zones. Dead zones impact over 400 locations around the world and are a result of nutrient pollution, one…
Integrating Engineering Design Challenges into Secondary STEM Education
Carr, Ronald L.; Strobel, Johannes
2011-01-01
Engineering is being currently taught in the full spectrum of the P-12 system, with an emphasis on design-oriented teaching (Brophy, Klein, Portsmore, & Rogers, 2008). Due to only a small amount of research on the learning of engineering design in elementary and middle school settings, the community of practice lacks the necessary knowledge of the…
IntegromeDB: an integrated system and biological search engine.
Baitaluk, Michael; Kozhenkov, Sergey; Dubinina, Yulia; Ponomarenko, Julia
2012-01-19
With the growth of biological data in volume and heterogeneity, web search engines become key tools for researchers. However, general-purpose search engines are not specialized for the search of biological data. Here, we present an approach at developing a biological web search engine based on the Semantic Web technologies and demonstrate its implementation for retrieving gene- and protein-centered knowledge. The engine is available at http://www.integromedb.org. The IntegromeDB search engine allows scanning data on gene regulation, gene expression, protein-protein interactions, pathways, metagenomics, mutations, diseases, and other gene- and protein-related data that are automatically retrieved from publicly available databases and web pages using biological ontologies. To perfect the resource design and usability, we welcome and encourage community feedback.
All in the family: integrating attachment and family systems theories.
Crittenden, Patricia McKinsey; Dallos, Rudi
2009-07-01
This article brings together ideas from attachment and systemic family therapy. There is both growing interest among systemic practitioners in the conceptual and empirical base of attachment theory and also the need for attachment theory to expand dyadic patterning to include its context in family functioning. We propose the Dynamic-Maturational Model (DMM) as being the most compatible and useful variant of attachment theory. With its emphasis on the functional nature of behavior, a dynamic view of development and change, and a focus on multiple attachments and representational systems, the DMM fits systemic concepts well. We propose that many apparent discrepancies between the theories will disappear if careful distinctions are made between observed behavior, functional explanations, and attributions. We conclude with theory-based recommendations for selecting treatment strategies. Several case examples that are theory based, counterintuitive, and tied to disorders that are difficult to treat are offered to give substance to our ideas.
Integrated Theory of Health Behavior Change: Background and Intervention Development
RYAN, POLLY
2009-01-01
An essential characteristic of advanced practice nurses is the use of theory in practice. Clinical nurse specialists apply theory in providing or directing patient care, in their work as consultants to staff nurses, and as leaders influencing and facilitating system change. Knowledge of technology and pharmacology has far outpaced knowledge of how to facilitate health behavior change, and new theories are needed to better understand how practitioners can facilitate health behavior change. In ...
From Foucault to Freire Through Facebook: Toward an Integrated Theory of mHealth.
Bull, Sheana; Ezeanochie, Nnamdi
2016-08-01
To document the integration of social science theory in literature on mHealth (mobile health) and consider opportunities for integration of classic theory, health communication theory, and social networking to generate a relevant theory for mHealth program design. A secondary review of research syntheses and meta-analyses published between 2005 and 2014 related to mHealth, using the AMSTAR (A Measurement Tool to Assess Systematic Reviews) methodology for assessment of the quality of each review. High-quality articles from those reviews using a randomized controlled design and integrating social science theory in program design, implementation, or evaluation were reviewed. Results There were 1,749 articles among the 170 reviews with a high AMSTAR score (≥30). Only 13 were published from 2005 to 2014, used a randomized controlled design and made explicit mention of theory in any aspect of their mHealth program. All 13 included theoretical perspectives focused on psychological and/or psychosocial theories and constructs. Conclusions There is a very limited use of social science theory in mHealth despite demonstrated benefits in doing so. We propose an integrated theory of mHealth that incorporates classic theory, health communication theory, and social networking to guide development and evaluation of mHealth programs. © 2015 Society for Public Health Education.
Systems Engineering and Integration for Advanced Life Support System and HST
Kamarani, Ali K.
2005-01-01
Systems engineering (SE) discipline has revolutionized the way engineers and managers think about solving issues related to design of complex systems: With continued development of state-of-the-art technologies, systems are becoming more complex and therefore, a systematic approach is essential to control and manage their integrated design and development. This complexity is driven from integration issues. In this case, subsystems must interact with one another in order to achieve integration objectives, and also achieve the overall system's required performance. Systems engineering process addresses these issues at multiple levels. It is a technology and management process dedicated to controlling all aspects of system life cycle to assure integration at all levels. The Advanced Integration Matrix (AIM) project serves as the systems engineering and integration function for the Human Support Technology (HST) program. AIM provides means for integrated test facilities and personnel for performance trade studies, analyses, integrated models, test results, and validated requirements of the integration of HST. The goal of AIM is to address systems-level integration issues for exploration missions. It will use an incremental systems integration approach to yield technologies, baselines for further development, and possible breakthrough concepts in the areas of technological and organizational interfaces, total information flow, system wide controls, technical synergism, mission operations protocols and procedures, and human-machine interfaces.
Cognitive load theory: New conceptualizations, specifications, and integrated research perspectives
G.W.C. Paas (Fred); T.A.J.M. van Gog (Tamara); J. Sweller (John)
2010-01-01
textabstractOver the last few years, cognitive load theory has progressed and advanced rapidly. The articles in this special issue, which document those advances, are based on contributions to the 3rd International Cognitive Load Theory Conference (2009), Heerlen, The Netherlands. The articles of
From theory to practice: integrating instructional technology into veterinary medical education.
Wang, Hong; Rush, Bonnie R; Wilkerson, Melinda; Herman, Cheryl; Miesner, Matt; Renter, David; Gehring, Ronette
2013-01-01
Technology has changed the landscape of teaching and learning. The integration of instructional technology into teaching for meaningful learning is an issue for all educators to consider. In this article, we introduce educational theories including constructivism, information-processing theory, and dual-coding theory, along with the seven principles of good practice in undergraduate education. We also discuss five practical instructional strategies and the relationship of these strategies to the educational theories. From theory to practice, the purpose of the article is to share our application of educational theory and practice to work toward more innovative teaching in veterinary medical education.
Integrative Dynamic Reconfiguration in a Parallel Stream Processing Engine
DEFF Research Database (Denmark)
Madsen, Kasper Grud Skat; Zhou, Yongluan; Cao, Jianneng
2017-01-01
Load balancing, operator instance collocations and horizontal scaling are critical issues in Parallel Stream Processing Engines to achieve low data processing latency, optimized cluster utilization and minimized communication cost respectively. In previous work, these issues are typically tackled...... solution called ALBIC, which support general jobs. We implement the proposed techniques on top of Apache Storm, an open-source Parallel Stream Processing Engine. The extensive experimental results over both synthetic and real datasets show that our techniques clearly outperform existing approaches....
Integration of a wood pellet burner and a Stirling engine to produce residential heat and power
International Nuclear Information System (INIS)
Cardozo, Evelyn; Erlich, Catharina; Malmquist, Anders; Alejo, Lucio
2014-01-01
The integration a Stirling engine with a pellet burner is a promising alternative to produce heat and power for residential use. In this context, this study is focused on the experimental evaluation of the integration of a 20 kW th wood pellet burner and a 1 kW e Stirling engine. The thermal power not absorbed by the engine is used to produce hot water. The evaluation highlights the effects of pellet type, combustion chamber length and cycling operation on the Stirling engine temperatures and thermal power absorbed. The results show that the position of the Stirling engine is highly relevant in order to utilize as much as possible of the radiative heat from the burner. Within this study, only a 5 cm distance change between the Stirling engine and the pellet burner could result in an increase of almost 100 °C in the hot side of the engine. However, at a larger distance, the temperature of the hot side is almost unchanged suggesting dominating convective heat transfer from the hot flue gas. Ash accumulation decreases the temperature of the hot side of the engine after some cycles of operation when a commercial pellet burner is integrated. The temperature ratio, which is the relation between the minimum and maximum temperatures of the engine, decreases when using Ø8 mm wood pellets in comparison to Ø6 mm pellets due to higher measured temperatures on the hot side of the engine. Therefore, the amount of heat supplied to the engine is increased for Ø8 mm wood pellets. The effectiveness of the engine regenerator is increased at higher pressures. The relation between temperature of the hot side end and thermal power absorbed by the Stirling engine is nearly linear between 500 °C and 660 °C. Higher pressure inside the Stirling engine has a positive effect on the thermal power output. Both the chemical and thermal losses increase somewhat when integrating a Stirling engine in comparison to a stand-alone boiler for only heat production. The overall efficiency
Advancing Tissue Engineering: A Tale of Nano-, Micro-, and Macroscale Integration
Leijten, Jeroen Christianus Hermanus; Rouwkema, Jeroen; Zhang, Y.S.; Nasajpour, A.; Dokmeci, M.R.; Khademhosseini, A.
2016-01-01
Tissue engineering has the potential to revolutionize the health care industry. Delivering on this promise requires the generation of efficient, controllable and predictable implants. The integration of nano- and microtechnologies into macroscale regenerative biomaterials plays an essential role in
The fully integrated biomedical engineering programme at Eindhoven University of Technology
Slaaf, D.W.; Genderen, van M.H.P.
2009-01-01
The development of a fully integrated biomedical engineering programme (life sciences included from the start) is described. Details are provided about background, implementation, and didactic concept: design centred learning combined with courses. The curriculum has developed into a
Exact results for integrable asymptotically-free field theories
Evans, J M; Evans, Jonathan M; Hollowood, Timothy J
1995-01-01
An account is given of a technique for testing the equivalence between an exact factorizable S-matrix and an asymptotically-free Lagrangian field theory in two space-time dimensions. The method provides a way of resolving CDD ambiguities in the S-matrix and it also allows for an exact determination of the physical mass in terms of the Lambda parameter of perturbation theory. The results for various specific examples are summarized. (To appear in the Proceedings of the Conference on Recent Developments in Quantum Field Theory and Statistical Mechanics, ICTP, Trieste, Easter 1995).
Precise digital integration in wide time range: theory and realization
International Nuclear Information System (INIS)
Batrakov, A.M.; Pavlenko, A.V.
2017-01-01
The digital integration method based on using high-speed precision analog-to-digital converters (ADC) has become widely used over the recent years. The paper analyzes the limitations of this method that are caused by the signal properties, ADC sampling rate and noise spectral density of the ADC signal path. This analysis allowed creating digital integrators with accurate synchronization and achieving an integration error of less than 10 −5 in the time range from microseconds to tens of seconds. The structure of the integrator is described and its basic parameters are presented. The possibilities of different ADC chips in terms of their applicability to digital integrators are discussed. A comparison with other integrating devices is presented.
State of the Art : Integrated Management of Requirements in Model-Based Software Engineering
Thörn, Christer
2006-01-01
This report describes the background and future of research concerning integrated management of requirements in model-based software engineering. The focus is on describing the relevant topics and existing theoretical backgrounds that form the basis for the research. The report describes the fundamental difficulties of requirements engineering for software projects, and proposes that the results and methods of models in software engineering can help leverage those problems. Taking inspiration...
Evers, Ken H.; Bachert, Robert F.
1987-01-01
The IDEAL (Integrated Design and Engineering Analysis Languages) modeling methodology has been formulated and applied over a five-year period. It has proven to be a unique, integrated approach utilizing a top-down, structured technique to define and document the system of interest; a knowledge engineering technique to collect and organize system descriptive information; a rapid prototyping technique to perform preliminary system performance analysis; and a sophisticated simulation technique to perform in-depth system performance analysis.
A SysML-based Integration Framework for the Engineering of Mechatronic Systems
Chami, Muhammad; Seemüller, Holger; Voos, Holger
2010-01-01
The engineering discipline mechatronics is one of the main innovation leader in industry nowadays. With the need for an optimal synergetic integration of the involved disciplines, the engineering process of mechatronic systems is faced with an increasing complexity and the interdisciplinary nature of these systems. New methods and techniques have to be developed to deal with these challenges. This document presents an approach of a SysML-based integration framework that s...
Bruce, E. A.
1980-01-01
The software developed by the IPAD project, a new and very powerful tool for the implementation of integrated Computer Aided Design (CAD) systems in the aerospace engineering community, is discussed. The IPAD software is a tool and, as such, can be well applied or misapplied in any particular environment. The many benefits of an integrated CAD system are well documented, but there are few such systems in existence, especially in the mechanical engineering disciplines, and therefore little available experience to guide the implementor.
How an Integrative STEM Curriculum Can Benefit Students in Engineering Design Practices
Fan, Szu-Chun; Yu, Kuang-Chao
2017-01-01
STEM-oriented engineering design practice has become recognized increasingly by technology education professionals in Taiwan. This study sought to examine the effectiveness of the application of an integrative STEM approach within engineering design practices in high school technology education in Taiwan. A quasi-experimental study was conducted…
Zwarteveen, J.W.; Blom, E.M.; Vastbinder, B.; Brezet, J.C.
2010-01-01
A modern engineer is more than a technical specialist. Training an integral engineer requires education in non-technical skills, including social and ethical aspects. Therefore, Delft University of Technology (DUT) introduced sustainable development and entrepreneurship into its bachelor and master
Integration of supervisory control synthesis in model-based systems engineering
Baeten, J.C.M.; van de Mortel - Fronczak, J.M.; Rooda, J.E.
2016-01-01
Increasing system complexity, time to market and development costs reduction place higher demands on engineering processes. Formal models play an important role here because they enable the use of various model-based analyses and early integration techniques and tools. Engineering processes based on
Path integral for a relativistic-particle theory
International Nuclear Information System (INIS)
Fradkin, E.S.; Gitman, D.M.; Shvartsman, S.M.
1991-01-01
An action of a relativistic spinning particle written in reparametrization and local super-invariant form is consistently determined by using the path integral representation for the Green's function of the spinor field. It is shown that, to obtain the causal propagator, the integration over the null mode of the onebein variable must be performed in the (0, + ∞ limits
Path integral for a relativistic-particle theory
Energy Technology Data Exchange (ETDEWEB)
Fradkin, E.S. (AN SSSR, Moscow (SU)); Gitman, D.M. (Moskovskij Inst. Radiotekhniki, Ehlektroniki i Automatiki, Moscow (SU)); Shvartsman, S.M. (Tomskij Pedagogicheskij Inst., Tomsk (SU))
1991-06-01
An action of a relativistic spinning particle written in reparametrization and local super-invariant form is consistently determined by using the path integral representation for the Green's function of the spinor field. It is shown that, to obtain the causal propagator, the integration over the null mode of the onebein variable must be performed in the (0, + {infinity}) limits.
A Theory of Change for Student-Led Academic Integrity
Richards, Deborah; Saddiqui, Sonia; White, Fiona; McGuigan, Nicholas; Homewood, Judi
2016-01-01
Breaches in academic integrity are a pervasive and enduring international concern to the overall quality of higher education. Despite students being the group most affected by academic integrity policies, organisational culture is such that students tend to be passive recipients of change initiatives, rather than the drivers. To deliver a paradigm…
13th International Conference on Integral Methods in Science and Engineering
Kirsch, Andreas
2015-01-01
This contributed volume contains a collection of articles on state-of-the-art developments on the construction of theoretical integral techniques and their application to specific problems in science and engineering. Written by internationally recognized researchers, the chapters in this book are based on talks given at the Thirteenth International Conference on Integral Methods in Science and Engineering, held July 21–25, 2014, in Karlsruhe, Germany. A broad range of topics is addressed, from problems of existence and uniqueness for singular integral equations on domain boundaries to numerical integration via finite and boundary elements, conservation laws, hybrid methods, and other quadrature-related approaches. This collection will be of interest to researchers in applied mathematics, physics, and mechanical and electrical engineering, as well as graduate students in these disciplines and other professionals for whom integration is an essential tool.
Integrating Computational Thinking into Technology and Engineering Education
Hacker, Michael
2018-01-01
Computational Thinking (CT) is being promoted as "a fundamental skill used by everyone in the world by the middle of the 21st Century" (Wing, 2006). CT has been effectively integrated into history, ELA, mathematics, art, and science courses (Settle, et al., 2012). However, there has been no analogous effort to integrate CT into…
Theory of absorption integrated optical sensor of gaseous materials
Egorov, A. A.
2010-10-01
The eigen and noneigen (leaky) modes of a three-layer planar integrated optical waveguide are described. The dispersion relation of a three-layer planar waveguide and other dependences are derived, and the cutoff conditions are analyzed. The diagram of propagation constants of the guided and radiation modes of an irregular asymmetric three-layer waveguide and the dependence of the electric field amplitudes of radiation modes of substrate on vertical coordinate in a tantalum integrated optical waveguide are presented. The operating principles of an absorption integrated optical waveguide sensor are investigated. The dependences of sensitivity of an integrated optical waveguide sensor on the sensory cell length, the coupling efficiency of the laser radiation into the waveguide, the absorption cross-section of the studied material, and the level of additive statistical noise are investigated. Some of the prospective areas of application of integrated-optical waveguide sensors are outlined.
Development of a theory of implementation and integration: Normalization Process Theory
Directory of Open Access Journals (Sweden)
May Carl R
2009-05-01
Full Text Available Abstract Background Theories are important tools in the social and natural sciences. The methods by which they are derived are rarely described and discussed. Normalization Process Theory explains how new technologies, ways of acting, and ways of working become routinely embedded in everyday practice, and has applications in the study of implementation processes. This paper describes the process by which it was built. Methods Between 1998 and 2008, we developed a theory. We derived a set of empirical generalizations from analysis of data collected in qualitative studies of healthcare work and organization. We developed an applied theoretical model through analysis of empirical generalizations. Finally, we built a formal theory through a process of extension and implication analysis of the applied theoretical model. Results Each phase of theory development showed that the constructs of the theory did not conflict with each other, had explanatory power, and possessed sufficient robustness for formal testing. As the theory developed, its scope expanded from a set of observed regularities in data with procedural explanations, to an applied theoretical model, to a formal middle-range theory. Conclusion Normalization Process Theory has been developed through procedures that were properly sceptical and critical, and which were opened to review at each stage of development. The theory has been shown to merit formal testing.
Pirie, Christopher M; De Mey, Marjan; Jones Prather, Kristala L; Ajikumar, Parayil Kumaran
2013-04-19
Through microbial engineering, biosynthesis has the potential to produce thousands of chemicals used in everyday life. Metabolic engineering and synthetic biology are fields driven by the manipulation of genes, genetic regulatory systems, and enzymatic pathways for developing highly productive microbial strains. Fundamentally, it is the biochemical characteristics of the enzymes themselves that dictate flux through a biosynthetic pathway toward the product of interest. As metabolic engineers target sophisticated secondary metabolites, there has been little recognition of the reduced catalytic activity and increased substrate/product promiscuity of the corresponding enzymes compared to those of central metabolism. Thus, fine-tuning these enzymatic characteristics through protein engineering is paramount for developing high-productivity microbial strains for secondary metabolites. Here, we describe the importance of protein engineering for advancing metabolic engineering of secondary metabolism pathways. This pathway integrated enzyme optimization can enhance the collective toolkit of microbial engineering to shape the future of chemical manufacturing.
Grenn, Michael W.
This dissertation introduces a theory of information quality to explain macroscopic behavior observed in the systems engineering process. The theory extends principles of Shannon's mathematical theory of communication [1948] and statistical mechanics to information development processes concerned with the flow, transformation, and meaning of information. The meaning of requirements information in the systems engineering context is estimated or measured in terms of the cumulative requirements quality Q which corresponds to the distribution of the requirements among the available quality levels. The requirements entropy framework (REF) implements the theory to address the requirements engineering problem. The REF defines the relationship between requirements changes, requirements volatility, requirements quality, requirements entropy and uncertainty, and engineering effort. The REF is evaluated via simulation experiments to assess its practical utility as a new method for measuring, monitoring and predicting requirements trends and engineering effort at any given time in the process. The REF treats the requirements engineering process as an open system in which the requirements are discrete information entities that transition from initial states of high entropy, disorder and uncertainty toward the desired state of minimum entropy as engineering effort is input and requirements increase in quality. The distribution of the total number of requirements R among the N discrete quality levels is determined by the number of defined quality attributes accumulated by R at any given time. Quantum statistics are used to estimate the number of possibilities P for arranging R among the available quality levels. The requirements entropy H R is estimated using R, N and P by extending principles of information theory and statistical mechanics to the requirements engineering process. The information I increases as HR and uncertainty decrease, and the change in information AI needed
Saunders-Smits, G.N.; Roling, P.; Brügemann, V.; Timmer, N.; Melkert, J.
2012-01-01
Over the past four years the Faculty of Aerospace Engineering at Delft University of Technology in the Netherlands has redeveloped its BSc curriculum to mimic an engineering design cycle. Each semester represents a step in the design cycle: exploration; system design; sub-system design; test,
2011-01-31
A recent survey on the working habits of professional engineers found that nearly 2/3 of their day is spent communicating with others, while only 1/3 is spent on tasks commonly associated with engineering (Sageev & Romanowski, 2001). Whether it is fa...
Category Theory as a Formal Mathematical Foundation for Model-Based Systems Engineering
Mabrok, Mohamed
2017-01-09
In this paper, we introduce Category Theory as a formal foundation for model-based systems engineering. A generalised view of the system based on category theory is presented, where any system can be considered as a category. The objects of the category represent all the elements and components of the system and the arrows represent the relations between these components (objects). The relationship between these objects are the arrows or the morphisms in the category. The Olog is introduced as a formal language to describe a given real-world situation description and requirement writing. A simple example is provided.
[An integrated theory of natural control of animal populations].
Schwerdtfeger, F
1968-11-01
Since the twenties of our century, at least 15 theories worth discussing have been developped which intend to explain the causes of natural control of animal populations (for details see SCHWERDTFEGER, 1968). An attempt is made to integrate the different-partly contrary-ideas and new results into a general theory. The basis to start from is the cybernetic principle of feed-back mechanism introduced into population dynamics by WILBERT (1962): an actual value (e.g. the inside temperature of a refrigerator) is permanently changed by perturbances (the always higher outside temperature); through a regulator (a thermostat), each change puts in action a regulating variable (a cooling device) which alters the actual towards the index value (required inside temperature).The often complicated processes that take part in the natural control of populations are summarized in Fig. 6. The actual value is the existing population density (Abundanz). The perturbances primarily causing its fluctuations (Fluktuation) are fertility and immigration which raise the abundance, mortality and emigration which lower it.The amplitude of the fluctuation must be limited, if the population is not to die out or to destroy its habitat by continuous increase. It is determined (Determination) as a sort of index value, the lower limit of which corresponds in the extreme to the minimal density guaranteeing the existence of the population, while the upper limit is formed by the environmental capacity. The latter is determined either by the total supply of requisites and the ability of the animals to use it or by the local minimum of adverse effects. The capacity of the environment and therewith the amplitude of fluctuations can be fixed or variable. It is fixed in a population of Great Tits with territorial behaviour: in an oak stand, the number of breeding pairs cannot be higher than the number of territories fitting in. It is variable in the case of bark beetles living in wind thrown spruce trees
Transient performance simulation of aircraft engine integrated with fuel and control systems
International Nuclear Information System (INIS)
Wang, C.; Li, Y.G.; Yang, B.Y.
2017-01-01
Highlights: • A new performance simulation method for engine hydraulic fuel systems is introduced. • Time delay of engine performance due to fuel system model is noticeable but small. • The method provides details of fuel system behavior in engine transient processes. • The method could be used to support engine and fuel system designs. - Abstract: A new method for the simulation of gas turbine fuel systems based on an inter-component volume method has been developed. It is able to simulate the performance of each of the hydraulic components of a fuel system using physics-based models, which potentially offers more accurate results compared with those using transfer functions. A transient performance simulation system has been set up for gas turbine engines based on an inter-component volume (ICV) method. A proportional-integral (PI) control strategy is used for the simulation of engine controller. An integrated engine and its control and hydraulic fuel systems has been set up to investigate their coupling effect during engine transient processes. The developed simulation system has been applied to a model aero engine. The results show that the delay of the engine transient response due to the inclusion of the fuel system model is noticeable although relatively small. The developed method is generic and can be applied to any other gas turbines and their control and fuel systems.
An integrative, experience-based theory of attentional control.
Wilder, Matthew H; Mozer, Michael C; Wickens, Christopher D
2011-02-09
Although diverse, theories of visual attention generally share the notion that attention is controlled by some combination of three distinct strategies: (1) exogenous cuing from locally contrasting primitive visual features, such as abrupt onsets or color singletons (e.g., L. Itti, C. Koch, & E. Neiber, 1998), (2) endogenous gain modulation of exogenous activations, used to guide attention to task-relevant features (e.g., V. Navalpakkam & L. Itti, 2007; J. Wolfe, 1994, 2007), and (3) endogenous prediction of likely locations of interest, based on task and scene gist (e.g., A. Torralba, A. Oliva, M. Castelhano, & J. Henderson, 2006). However, little work has been done to synthesize these disparate theories. In this work, we propose a unifying conceptualization in which attention is controlled along two dimensions: the degree of task focus and the contextual scale of operation. Previously proposed strategies-and their combinations-can be viewed as instances of this one mechanism. Thus, this theory serves not as a replacement for existing models but as a means of bringing them into a coherent framework. We present an implementation of this theory and demonstrate its applicability to a wide range of attentional phenomena. The model accounts for key results in visual search with synthetic images and makes reasonable predictions for human eye movements in search tasks involving real-world images. In addition, the theory offers an unusual perspective on attention that places a fundamental emphasis on the role of experience and task-related knowledge.
Peterman, Karen; Daugherty, Jenny L.; Custer, Rodney L.; Ross, Julia M.
2017-09-01
Science teachers are being called on to incorporate engineering practices into their classrooms. This study explores whether the Engineering-Infused Lesson Rubric, a new rubric designed to target best practices in engineering education, could be used to evaluate the extent to which engineering is infused into online science lessons. Eighty lessons were selected at random from three online repositories, and coded with the rubric. Overall results documented the strengths of existing lessons, as well as many components that teachers might strengthen. In addition, a subset of characteristics was found to distinguish lessons with the highest level of engineering infusion. Findings are discussed in relation to the potential of the rubric to help teachers use research evidence-informed practice generally, and in relation to the new content demands of the U.S. Next Generation Science Standards, in particular.
Execution Of Systems Integration Principles During Systems Engineering Design
2016-09-01
application utilized a paper-based approach to systems design. The customer directed utilization of an SE Waterfall process model . These new...regarding requirements, stakeholders, testing, and system boundaries. Additionally, this thesis discusses use of systems architecture frameworks and models ...and the consistent use of model - based systems engineering throughout development. Lastly, it proposes formal methods language for improving models
Knowledge management in an integrated design and engineering environment
Reefman, R.J.B.; Van Nederveen, G.A.
2012-01-01
Organisations and / or disciplines in Building and Construction projects are usually working in their own design and engineering environments and using their own Building Information Models (BIM). The discipline models are merged into a project BIM which is mainly used to check for interferences or
Integrating reuse measurement practices into the ERP requirements engineering process
Daneva, Maia; Münich, Jürgen; Vierimaa, Matias
2006-01-01
The management and deployment of reuse-driven and architecturecentric requirements engineering processes have become common in many organizations adopting Enterprise Resource Planning solutions. Yet, little is known about the variety of reusability aspects in ERP projects at the level of
Edwards, L.; Santisteban, J. R.
The determination of accurate reliable residual stresses is critical to many fields of structural integrity. Neutron stress measurement is a non-destructive technique that uniquely provides insights into stress fields deep within engineering components and structures. As such, it has become an increasingly important tool within engineering, leading to improved manufacturing processes to reduce stress and distortion as well as to the definition of more precise lifing procedures. This paper describes the likely impact of the next generation of dedicated engineering stress diffractometers currently being constructed and the utility of the technique using examples of residual stresses both beneficial and detrimental to structural integrity.
A conceptual framework for the integration of flow theory and cognitive evaluation theory
Abuhamdeh, Sami
2012-01-01
Flow theory (Csikszentmihalyi, Beyond boredom and anxiety: Experiencing flow in work and play. Jossey-Bass, San Francisco, 1975) and cognitive evaluation theory (Deci and Ryan, Intrinsic motivation and self-determination in human behaviour. Plenum, New York, 1985) have each inspired a large body of research dedicated to understanding why we enjoy doing what we enjoy doing. Although both theories ostensibly address the same category of behavior—namely, intrinsically motivated behavior—there ha...
Model-integrating software components engineering flexible software systems
Derakhshanmanesh, Mahdi
2015-01-01
In his study, Mahdi Derakhshanmanesh builds on the state of the art in modeling by proposing to integrate models into running software on the component-level without translating them to code. Such so-called model-integrating software exploits all advantages of models: models implicitly support a good separation of concerns, they are self-documenting and thus improve understandability and maintainability and in contrast to model-driven approaches there is no synchronization problem anymore between the models and the code generated from them. Using model-integrating components, software will be
The network perspective: an integration of attachment and family systems theories.
Kozlowska, Kasia; Hanney, Lesley
2002-01-01
In this article we discuss the network paradigm as a useful base from which to integrate attachment and family systems theories. The network perspective refers to the application of general systems theory to living systems, and provides a framework that conceptualizes the dyadic and family systems as simultaneously distinct and interconnected. Network thinking requires that the clinician holds multiple perspectives in mind, considers each system level as both a part and a whole, and shifts the focus of attention between levels as required. Key epistemological issues that have hindered the integration of the theories are discussed. These include inconsistencies within attachment theory itself and confusion surrounding the theoretical conceptualizations of the relationship between attachment and family systems theories. Detailed information about attachment categories is provided using the Dynamic Maturational model. Case vignettes illustrating work with young children and their families explore the clinical implications of integrating attachment data into family therapy practice.
Three- and two-point one-loop integrals in heavy particle effective theories
International Nuclear Information System (INIS)
Bouzas, A.O.
2000-01-01
We give a complete analytical computation of three- and two-point loop integrals occurring in heavy particle theories, involving a velocity change, for arbitrary real values of the external masses and residual momenta. (orig.)
International Nuclear Information System (INIS)
Killingbeck, J.
1979-01-01
By using the methods of perturbation theory it is possible to construct simple formulae for the numerical integration of the Schroedinger equation, and also to calculate expectation values solely by means of simple eigenvalue calculations. (Auth.)
DEFF Research Database (Denmark)
Jørgensen, Ulrik; Brodersen, Søsser
2011-01-01
practice. Consequently courses added into engineering curricula emphasizing contextual issues stay in stark contrast to the dominant instrumental disciplines of mathematics and techno-science content of core engineering courses. Based on several years of teaching and experimenting with Theory of Science...
Kersten, Jennifer Anna
In recent years there has been increasing interest in engineering education at the K-12 level, which has resulted in states adopting engineering standards as a part of their academic science standards. From a national perspective, the basis for research into engineering education at the K-12 level is the belief that it is of benefit to student learning, including to "improve student learning and achievement in science and mathematics; increase awareness of engineering and the work of engineers; boost youth interest in pursuing engineering as a career; and increase the technological literacy of all students" (National Research Council, 2009a, p. 1). The above has led to a need to understand how teachers are currently implementing engineering education in their classrooms. High school physics teachers have a history of implementing engineering design projects in their classrooms, thus providing an appropriate setting to look for evidence of quality engineering education at the high school level. Understanding the characteristics of quality engineering integration can inform curricular and professional development efforts for teachers asked to implement engineering in their classrooms. Thus, the question that guided this study is: How, and to what extent, do physics teachers represent quality engineering in a physics unit focused on engineering? A case study research design was implemented for this project. Three high school physics teachers were participants in this study focused on the integration of engineering education into the physics classroom. The data collected included observations, interviews, and classroom documents that were analyzed using the Framework for Quality K-12 Engineering Education (Moore, Glancy et al., 2013). The results provided information about the areas of the K-12 engineering framework addressed during these engineering design projects, and detailed the quality of these lesson components. The results indicate that all of the design
Willems, F.P.T.; Kupper, F.; Cloudt, R.P.M.
2012-01-01
This study presents an integrated energy and emission management strategy for an Euro-VI diesel engine with Waste Heat Recovery (WHR) system. This Integrated Powertrain Control (IPC) strategy optimizes the CO2-NOx trade-off by minimizing the operational costs associated with fuel and AdBlue
Willems, F.P.T.; Kupper, F.; Cloudt, R.P.M.
2012-01-01
This study presents an integrated energy and emission management strategy for an Euro-VI diesel engine with Waste Heat Recovery (WHR) system. This Integrated Powertrain Control (IPC) strategy optimizes the CO2-NOx trade-off by minimizing the operational costs associated with fuel and AdBlue
Curran, R.; Verhagen, W.J.C.; Van Tooren, M.J.L.
2010-01-01
The paper is associated with the integration of multi-disciplinary knowledge within a Knowledge Based Engineering (KBE)-enabled design framework. To support this integration effort, the KNOMAD methodology has been devised. KNOMAD stands for Knowledge Optimized Manufacture And Design and is a
System Engineering and Integration of Controls for Advanced Life Support
Overland, David; Hoo, Karlene; Ciskowski, Marvin
2006-01-01
The Advanced Integration Matrix (AIM) project at the Johnson Space Center (JSC) was chartered to study and solve systems-level integration issues for exploration missions. One of the first issues identified was an inability to conduct trade studies on control system architectures due to the absence of mature evaluation criteria. Such architectures are necessary to enable integration of regenerative life support systems. A team was formed to address issues concerning software and hardware architectures and system controls.. The team has investigated what is required to integrate controls for the types of non-linear dynamic systems encountered in advanced life support. To this end, a water processing bioreactor testbed is being developed which will enable prototyping and testing of integration strategies and technologies. Although systems such as the water bioreactors exhibit the complexities of interactions between control schemes most vividly, it is apparent that this behavior and its attendant risks will manifest itself among any set of interdependent autonomous control systems. A methodology for developing integration requirements for interdependent and autonomous systems is a goal of this team and this testbed. This paper is a high-level summary of the current status of the investigation, the issues encountered, some tentative conclusions, and the direction expected for further research.
Wess-Zumino and super Yang-Mills theories in D=4 integral superspace
Castellani, L.; Catenacci, R.; Grassi, P. A.
2018-05-01
We reconstruct the action of N = 1 , D = 4 Wess-Zumino and N = 1 , 2 , D = 4 super-Yang-Mills theories, using integral top forms on the supermanifold M^{(.4|4)} . Choosing different Picture Changing Operators, we show the equivalence of their rheonomic and superspace actions. The corresponding supergeometry and integration theory are discussed in detail. This formalism is an efficient tool for building supersymmetric models in a geometrical framework.
Russian Academy of Engineering: a strong power for integration of engineering community
Directory of Open Access Journals (Sweden)
GUSEV Boris Vladimirovich
2015-04-01
Full Text Available Russian Academy of Engineering is legal successor of the Engineering Academy of USSR, founded by 20 ministries and departments of USSR and RSFSR on May 13, 1990. The Engineering Academy of USSR since the very beginning of its functioning, has launched its task-oriented activity on strengthening of links between science and industry, on solving the problems of using the results of basic (fundamental research and their accelerated adaptation into the industry. In the post-Soviet period, on the basis of the Academy, the Ministry of Justice of the Russian Federation, on December 24, 1991, registered the All-Russian Public Organization Russian Academy of Engineering (RAE. At the present time, RAE includes over 1350 full and corresponding members, prominent Russian scientists, engineers and industry organizers, over 200 member societies which include major Russian science & technology organizations, and over 40 regional engineering-technical structures, departments of RAE. RAE carries out large-scale work on the development of science & technology areas in science, creating new machinery and technologies, organization of efficient functioning of the Russian Engineering community. During the 25-year period of work, about 4,5 thousand new technologies were developed, over 6,5 thousand monographs were published. Over 4 thousand patents were obtained. 209 members of RAE became laureates of State Prize of USSR and RF, 376 members of RAE became laureates of Government Prize of USSR and RF. Annual value of science & research, project and other works in the area of engineering amounts from 0,5 to 1 billion roubles. This information and reference edition of the Encyclopedia of the Russian Academy of Engineering is dedicated to the 25th anniversary of the Russian Academy of Engineering. The Encyclopedia includes creative biographies of more than 1750 full and corresponding members of RAE, prominent scientists, distinguished engineers and organizers of industry
International Nuclear Information System (INIS)
Barthelmess, H.; Queren, W.; Stracke, M.
1989-01-01
The structure and function of the Information AAssociation for Welding Engineering, newly established by the Deutscher Verband fuer Schweisstechnik, are presented. Examined are: special literature for welding techniques - value and prospects; databases accessible to the public for information on welding techniques; concept for the Information Association for Welding Engineering; the four phases to establish databasis for facts and expert systems of the Information Association for Welding Engineering; the pilot project 'MVT-Data base' (hot crack data base for data of modified varestraint-transvarestraint tests). (orig./MM) [de
Environmental Engineering and Sustainable Development
Said Salah Eldin Elnashaie
2018-01-01
Chemical Engineering is a very rich discipline and it is best classified using System Theory (ST) and utilized using the Integrated System Approach (ISA). Environmental Engineering (EE) is a subsystem of Chemical Engineering and also a subsystem of Sustainable Development (SD). In this paper both EE and SD are discussed from a Chemical Engineering point of view utilizing ST and ISA.
Integrable System and $N=2$ Supersymmetric Yang-Mills Theory
Nakatsu, T.; Takasaki, K.
1996-01-01
Comment: 6 pages,latex file with sprocl.sty, no figures, to appear in the Proceedings of the Workshop (Talk presented at the Workshop "Frontiers in Quantum Field Theory" in honor of the 60th birthday of Prof. Keiji Kikkawa, Osaka, Japan, December 1995
On the classical origins of yangian symmetry in integrable field theory
International Nuclear Information System (INIS)
MacKay, N.J.
1992-01-01
We show that Drinfeld's yangian algebra, studied recently as the algebra of conserved charges in certain two-dimensional integrable quantum field theories, is also present in the classical theory as a Poisson-Hopf algebra, and exhibit explicitly the Serre relations, coproduct and antipode. (orig.)
CSIR Research Space (South Africa)
Mbecke, ZP
2010-07-01
Full Text Available factors over other contributing factors. The aim of the thesis is three-fold. Firstly, to review theories explaining crime causation in general and child abuse in particular. Secondly to develop the Integrated Modeled Theory as a model that facilitates...
An integral approach to town planning: lessons from personal construct theory, part 1
A Jackson
1986-01-01
Personal construct theory is introduced as an all-embracing philosophy which provides a consistent framework for integrating different notions about the planning process. The implication is that 'man-the-planner' does not necessarily have constructs which are better, more accurate, or more predictive than his subject, 'man-the-planned'. Policies can be seen as theories, in which case they should be clearly expressed as such. The theory and its methodology have been used in an empirical invest...
Integrated Optical Circuit Engineering For Optical Fiber Gyrocopes
Bristow, Julian P.; We, Albert C.; Keur, M.; Lukas, Greg; Ott, Daniel M...; Sriram, S.
1988-03-01
Fiber optic gyroscopes are of interest for low-cost, high performance rotation sensors. Integrated optical implementations of the processing optics offer the hope of mass-production, and associated cost reductions. The development of a suitable integrated optical system has been reported by other authors at a wavelength of 850nm [1]. Despite strong technical advantages at 1.3μm wavelength [2], no results have yet appeared. This wavelength is preferred for telecommunications applications applications, thus significantly reduced fiber costs may be realized. Lithium niobate is relatively immune from the photorefractive effect at this wavelength, whereas it is not at at 850nm [3].
Computer-aided engineering of semiconductor integrated circuits
Meindl, J. D.; Dutton, R. W.; Gibbons, J. F.; Helms, C. R.; Plummer, J. D.; Tiller, W. A.; Ho, C. P.; Saraswat, K. C.; Deal, B. E.; Kamins, T. I.
1980-07-01
Economical procurement of small quantities of high performance custom integrated circuits for military systems is impeded by inadequate process, device and circuit models that handicap low cost computer aided design. The principal objective of this program is to formulate physical models of fabrication processes, devices and circuits to allow total computer-aided design of custom large-scale integrated circuits. The basic areas under investigation are (1) thermal oxidation, (2) ion implantation and diffusion, (3) chemical vapor deposition of silicon and refractory metal silicides, (4) device simulation and analytic measurements. This report discusses the fourth year of the program.
Integrable lambda models and Chern-Simons theories
International Nuclear Information System (INIS)
Schmidtt, David M.
2017-01-01
In this note we reveal a connection between the phase space of lambda models on S 1 ×ℝ and the phase space of double Chern-Simons theories on D×ℝ and explain in the process the origin of the non-ultralocality of the Maillet bracket, which emerges as a boundary algebra. In particular, this means that the (classical) AdS 5 ×S 5 lambda model can be understood as a double Chern-Simons theory defined on the Lie superalgebra psu(2,2|4) after a proper dependence of the spectral parameter is introduced. This offers a possibility for avoiding the use of the problematic non-ultralocal Poisson algebras that preclude the introduction of lattice regularizations and the application of the QISM to string sigma models. The utility of the equivalence at the quantum level is, however, still to be explored.
Integrable models in 1+1 dimensional quantum field theory
International Nuclear Information System (INIS)
Faddeev, Ludvig.
1982-09-01
The goal of this lecture is to present a unifying view on the exactly soluble models. There exist several reasons arguing in favor of the 1+1 dimensional models: every exact solution of a field-theoretical model can teach about the ability of quantum field theory to describe spectrum and scattering; some 1+1 d models have physical applications in the solid state theory. There are several ways to become acquainted with the methods of exactly soluble models: via classical statistical mechanics, via Bethe Ansatz, via inverse scattering method. Fundamental Poisson bracket relation FPR and/or fundamental commutation relations FCR play fundamental role. General classification of FPR is given with promizing generalizations to FCR
On integration over Fermi fields in chiral and supersymmetric theories
International Nuclear Information System (INIS)
Vainshtein, A.I.; Zakharov, V.I.
1982-01-01
Chiral and supersymmetric theories are considered which cannot be formulated directly in Euclidean space or regularized by means of massive fields in a manifestly gauge invariant fashion. In case of so called real representations a simple recipe is proposed which allows for unambiguous evaluation of the fermionic determinant circumventing the difficulties mentioned. As application of the general technique the effective fermionic interactions induced by instantons of small size within simplest chiral and supesymmetric theories are calculated (SU(2) as the gauge group and one doublet of Weyl spinors or a triplet of Majorana spinors, respectively). In the latter case the effective Lagrangian violates explicitly invariance under supersymmetric transformations on the fermionic and vector fields defined in standard way [ru
Integrable lambda models and Chern-Simons theories
Energy Technology Data Exchange (ETDEWEB)
Schmidtt, David M. [Departamento de Física, Universidade Federal de São Carlos,Caixa Postal 676, CEP 13565-905, São Carlos-SP (Brazil)
2017-05-03
In this note we reveal a connection between the phase space of lambda models on S{sup 1}×ℝ and the phase space of double Chern-Simons theories on D×ℝ and explain in the process the origin of the non-ultralocality of the Maillet bracket, which emerges as a boundary algebra. In particular, this means that the (classical) AdS{sub 5}×S{sup 5} lambda model can be understood as a double Chern-Simons theory defined on the Lie superalgebra psu(2,2|4) after a proper dependence of the spectral parameter is introduced. This offers a possibility for avoiding the use of the problematic non-ultralocal Poisson algebras that preclude the introduction of lattice regularizations and the application of the QISM to string sigma models. The utility of the equivalence at the quantum level is, however, still to be explored.
From Knowledge Theory to Management Practice: Towards an Integrated Approach.
Shin, Minsoo; Holden, Tony; Schmidt, Ruth A.
2001-01-01
Critically contrasts the three main schools of thought on knowledge and assesses the resulting implications for knowledge management. Presents a conceptual model to integrate theoretical and practical themes to serve as a framework for developing a future research agenda for the development of knowledge management business tools and applications.…
Computer integrated manufacturing in the chemical industry : Theory & practice
Ashayeri, J.; Teelen, A.; Selen, W.J.
1995-01-01
This paper addresses the possibilities of implementing Computer Integrated Manufacturing in the process industry, and the chemical industry in particular. After presenting some distinct differences of the process industry in relation to discrete manufacturing, a number of focal points are discussed.
Integrator backstepping using contraction theory: a brief technological note
DEFF Research Database (Denmark)
Jouffroy, Jerome; Lottin, Jacques
While the use of Lyapunov function candidates for integrator backstepping has been extensively studied in the literature, little research has been conducted regarding the applicability of the so-called incremental stability approaches. This note addresses the problem of the use of an incremental ...
412 The Effects of Integrating Laboratory Work with Theory on ...
African Journals Online (AJOL)
User
2010-10-17
Oct 17, 2010 ... This study was an attempt to investigate the effects of integrating ... which is antithesis of true science. ... Where O1 and O3 are pretest measurement of experimental and ... schools in the study area formed the sample for the study. ... questions drawn from the selected physics concepts, elasticity, simple.
Energy expressions in density-functional theory using line integrals.
van Leeuwen, R.; Baerends, E.J.
1995-01-01
In this paper we will address the question of how to obtain energies from functionals when only the functional derivative is given. It is shown that one can obtain explicit expressions for the exchange-correlation energy from approximate exchange-correlation potentials using line integrals along
Distribution theory for Schrödinger’s integral equation
Lange, R.J.
2015-01-01
Much of the literature on point interactions in quantum mechanics has focused on the differential form of Schrödinger's equation. This paper, in contrast, investigates the integral form of Schrödinger's equation. While both forms are known to be equivalent for smooth potentials, this is not true for
Safety Concepts in Structural Glass Engineering : Towards an Integrated Approach
Bos, F.P.
2009-01-01
This dissertation proposes the Integrated Approach to Structural Glass Safety, based on four clearly defined element safety properties, damage sensitivity, relative resistance, redundancy, and fracture mode. The Element Safety Diagram (ESD) is introduced to provide an easy-to-read graphical
Acosta-Humánez, P.; Alvarez-Ramírez, M.; Stuchi, T.
2017-01-01
We show the non-integrability of the three-parameter Armburster-Guckenheimer-Kim quartic Hamiltonian using Morales-Ramis theory, with the exception of the three already known integrable cases. We use Poincar\\'e sections to illustrate the breakdown of regular motion for some parameter values.
Energy Technology Data Exchange (ETDEWEB)
Powell, R.R. [Texas Tech Univ., Lubbock, TX (United States). College of Education
1998-12-01
Integrative curriculum as both a theoretical construct and a practical reality, and as a theme-based, problem-centered, democratic way of schooling, is becoming more widely considered as a feasible alternative to traditional middle-level curricula. Importantly for teaching and learning, domain dependence requires teachers to view one area of knowledge as fully interdependent with other areas of knowledge during the learning process. This requires teachers to adopt personal epistemological theories that reflect integrative, domain dependent knowing. This study explored what happened when teachers from highly traditional domain independent school settings encountered an ambitious college-level curriculum project that was designed to help the teachers understand the potential that integrative, domain dependent teaching holds for precollege settings. This study asked: What influence does an integrative, domain dependent curriculum project have on teachers` domain independent, epistemological theories for teaching and learning? Finding an answer to this question is essential if we, as an educational community, are to understand how integrative curriculum theory is transformed by teachers into systemic curriculum reform. The results suggest that the integrative curriculum project that teachers participated in did not explicitly alter their classroom practices in a wholesale manner. Personal epistemological theories of teachers collectively precluded teachers from making any wholesale changes in their individual classroom teaching. However, teachers became aware of integrative curriculum as an alternative, and they expressed interest in infusing integrative practices into their classrooms as opportunities arise.
Rethinking Dabrowski's Theory: I. the Case against Primary Integration
Piechowski, Michael M.
2014-01-01
Some terms of Dabrowski's theory are misleading. The construct of level and the concepts of integration and disintegration mean different things. The concept of primary integration as a starting point for personality development is untenable in light of research on child development. In its place, Level I as a type of development that is…
Practitioners' Perspectives on the Application of Integration Theory in the Saudi EFL Context
Almalki, Mansoor S.; Soomro, Abdul Fattah
2017-01-01
There is a close connection between reading and writing. Several studies suggest integrating reading in the instruction of teaching writing skills to English as a Foreign Language (EFL) learner. This study seeks to determine the extent Saudi EFL teachers support, apply and understand the theory of integration between reading and writing. To…
MaxEnt-Based Ecological Theory: A Template for Integrated Catchment Theory
Harte, J.
2017-12-01
The maximum information entropy procedure (MaxEnt) is both a powerful tool for inferring least-biased probability distributions from limited data and a framework for the construction of complex systems theory. The maximum entropy theory of ecology (METE) describes remarkably well widely observed patterns in the distribution, abundance and energetics of individuals and taxa in relatively static ecosystems. An extension to ecosystems undergoing change in response to disturbance or natural succession (DynaMETE) is in progress. I describe the structure of both the static and the dynamic theory and show a range of comparisons with census data. I then propose a generalization of the MaxEnt approach that could provide a framework for a predictive theory of both static and dynamic, fully-coupled, eco-socio-hydrological catchment systems.
Integral finned heater and cooler for stirling engines
Corey, John A.
1984-01-01
A piston and cylinder for a Stirling engine and the like having top and bottom meshing or nesting finned conical surfaces to provide large surface areas in close proximity to the working gas for good thermal (addition and subtraction of heat) exchange to the working gas and elimination of the usual heater and cooler dead volume. The piston fins at the hot end of the cylinder are perforated to permit the gas to pass into the piston interior and through a regenerator contained therein.
Engineering Application Way of Faults Knowledge Discovery Based on Rough Set Theory
International Nuclear Information System (INIS)
Zhao Rongzhen; Deng Linfeng; Li Chao
2011-01-01
For the knowledge acquisition puzzle of intelligence decision-making technology in mechanical industry, to use the Rough Set Theory (RST) as a kind of tool to solve the puzzle was researched. And the way to realize the knowledge discovery in engineering application is explored. A case extracting out the knowledge rules from a concise data table shows out some important information. It is that the knowledge discovery similar to the mechanical faults diagnosis is an item of complicated system engineering project. In where, first of all-important tasks is to preserve the faults knowledge into a table with data mode. And the data must be derived from the plant site and should also be as concise as possible. On the basis of the faults knowledge data obtained so, the methods and algorithms to process the data and extract the knowledge rules from them by means of RST can be processed only. The conclusion is that the faults knowledge discovery by the way is a process of rising upward. But to develop the advanced faults diagnosis technology by the way is a large-scale knowledge engineering project for long time. Every step in which should be designed seriously according to the tool's demands firstly. This is the basic guarantees to make the knowledge rules obtained have the values of engineering application and the studies have scientific significance. So, a general framework is designed for engineering application to go along the route developing the faults knowledge discovery technology.
Multiscale N=2 SUSY field theories, integrable systems and their stringy/brane origin
International Nuclear Information System (INIS)
Gorsky, A.; Gukov, S.; Mironov, A.
1998-01-01
We discuss supersymmetric Yang-Mills theories with multiple scales in the brane language. The issue concerns N=2 SUSY gauge theories with massive fundamental matter including the UV finite case of n f =2n c , theories involving products of SU(n) gauge groups with bifundamental matter, and systems with several parameters similar to Λ QCD . We argue that the proper integrable systems are, accordingly, twisted XXX SL(2) spin chain, SL(p) magnets and degenerations of the spin Calogero system. The issue of symmetries underlying integrable systems is addressed. Relations with the monopole systems are specially discussed. Brane pictures behind all these integrable structures in the IIB and M-theory are suggested. We argue that degrees of freedom in integrable systems are related to KK excitations in M-theory or D-particles in the IIA string theory, which substitute the infinite number of instantons in the field theory. This implies the presence of more BPS states in the low-energy sector. (orig.)
Integrating Technical Communication in the Mechanical Engineering Curriculum
Norberg, Seth; Ashcraft, Timothy; van Poppel, Bret
2017-11-01
Technical communication is essential to engineering practice, but these skills can be challenging to teach and assess in the classroom. Instructors in the Mechanical Engineering (ME) program at the United States Military Academy are developing new learning exercises to prepare students for success in their capstone design course and beyond. In this paper we highlight the recent successes and lessons learned from two courses: junior-level Thermal-Fluid Systems and the senior-level ME Seminar. Both courses support the newly implemented West Point Writing Program (WPWP), an institutional, writing-across-the-curriculum program. The junior course incorporates four hands-on experiments, which provide an abundance of data for students to analyze, assess, and present. In the senior course the majority of the content that students present is from their ongoing capstone design projects. Between the two courses, students craft essays, lab reports, short summaries, posters, quad charts, and technical presentations. Both courses include peer evaluation, revision exercises, and timed (on demand) writing assignments. The junior course includes assignments co-authored by a group as well as an individual report. An overview of both courses' assignments with course-end feedback from the students and the faculty is provided. Strengths and weaknesses are identified and recommendations for instructors seeking to implement similar technical communications assignments in their own courses are presented.
Teachers' Integration of Scientific and Engineering Practices in Primary Classrooms
Merritt, Eileen G.; Chiu, Jennie; Peters-Burton, Erin; Bell, Randy
2017-06-01
The Next-Generation Science Standards (NGSS) challenge primary teachers and students to work and think like scientists and engineers as they strive to understand complex concepts. Teachers and teacher educators can leverage what is already known about inquiry teaching as they plan instruction to help students meet the new standards. This cross-case analysis of a multiple case study examined teacher practices in the context of a semester-long professional development course for elementary teachers. We reviewed lessons and teacher reflections, examining how kindergarten and first grade teachers incorporated NGSS scientific and engineering practices during inquiry-based instruction. We found that most of the teachers worked with their students on asking questions; planning and carrying out investigations; analyzing and interpreting data, using mathematics and computational thinking; and obtaining, evaluating and communicating information. Teachers faced challenges in supporting students in developing their own questions that could be investigated and using data collection strategies that aligned with students' development of number sense concepts. Also, some teachers overemphasized the scientific method and lacked clarity in how they elicited and responded to student predictions. Discussion focuses on teacher supports that will be needed as states transition to NGSS.
Network theory-based analysis of risk interactions in large engineering projects
International Nuclear Information System (INIS)
Fang, Chao; Marle, Franck; Zio, Enrico; Bocquet, Jean-Claude
2012-01-01
This paper presents an approach based on network theory to deal with risk interactions in large engineering projects. Indeed, such projects are exposed to numerous and interdependent risks of various nature, which makes their management more difficult. In this paper, a topological analysis based on network theory is presented, which aims at identifying key elements in the structure of interrelated risks potentially affecting a large engineering project. This analysis serves as a powerful complement to classical project risk analysis. Its originality lies in the application of some network theory indicators to the project risk management field. The construction of the risk network requires the involvement of the project manager and other team members assigned to the risk management process. Its interpretation improves their understanding of risks and their potential interactions. The outcomes of the analysis provide a support for decision-making regarding project risk management. An example of application to a real large engineering project is presented. The conclusion is that some new insights can be found about risks, about their interactions and about the global potential behavior of the project. - Highlights: ► The method addresses the modeling of complexity in project risk analysis. ► Network theory indicators enable other risks than classical criticality analysis to be highlighted. ► This topological analysis improves project manager's understanding of risks and risk interactions. ► This helps project manager to make decisions considering the position in the risk network. ► An application to a real tramway implementation project in a city is provided.
Integrating Health Behavior Theory and Design Elements in Serious Games.
Cheek, Colleen; Fleming, Theresa; Lucassen, Mathijs Fg; Bridgman, Heather; Stasiak, Karolina; Shepherd, Matthew; Orpin, Peter
2015-01-01
Internet interventions for improving health and well-being have the potential to reach many people and fill gaps in service provision. Serious gaming interfaces provide opportunities to optimize user adherence and impact. Health interventions based in theory and evidence and tailored to psychological constructs have been found to be more effective to promote behavior change. Defining the design elements which engage users and help them to meet their goals can contribute to better informed serious games. To elucidate design elements important in SPARX, a serious game for adolescents with depression, from a user-centered perspective. We proposed a model based on an established theory of health behavior change and practical features of serious game design to organize ideas and rationale. We analyzed data from 5 studies comprising a total of 22 focus groups and 66 semistructured interviews conducted with youth and families in New Zealand and Australia who had viewed or used SPARX. User perceptions of the game were applied to this framework. A coherent framework was established using the three constructs of self-determination theory (SDT), autonomy, competence, and relatedness, to organize user perceptions and design elements within four areas important in design: computer game, accessibility, working alliance, and learning in immersion. User perceptions mapped well to the framework, which may assist developers in understanding the context of user needs. By mapping these elements against the constructs of SDT, we were able to propose a sound theoretical base for the model. This study's method allowed for the articulation of design elements in a serious game from a user-centered perspective within a coherent overarching framework. The framework can be used to deliberately incorporate serious game design elements that support a user's sense of autonomy, competence, and relatedness, key constructs which have been found to mediate motivation at all stages of the change
Weighted Littlewood-Paley theory and exponential-square integrability
Wilson, Michael
2008-01-01
Littlewood-Paley theory is an essential tool of Fourier analysis, with applications and connections to PDEs, signal processing, and probability. It extends some of the benefits of orthogonality to situations where orthogonality doesn’t really make sense. It does so by letting us control certain oscillatory infinite series of functions in terms of infinite series of non-negative functions. Beginning in the 1980s, it was discovered that this control could be made much sharper than was previously suspected. The present book tries to give a gentle, well-motivated introduction to those discoveries, the methods behind them, their consequences, and some of their applications.
Gauge-fields and integrated quantum-classical theory
International Nuclear Information System (INIS)
Stapp, H.P.
1986-01-01
Physical situations in which quantum systems communicate continuously to their classically described environment are not covered by contemporary quantum theory, which requires a temporary separation of quantum degrees of freedom from classical ones. A generalization would be needed to cover these situations. An incomplete proposal is advanced for combining the quantum and classical degrees of freedom into a unified objective description. It is based on the use of certain quantum-classical structures of light that arise from gauge invariance to coordinate the quantum and classical degrees of freedom. Also discussed is the question of where experimenters should look to find phenomena pertaining to the quantum-classical connection. 17 refs
International Nuclear Information System (INIS)
Pop-Jordanov, J.; Bosevski, T.; Kocic, A.; Altiparmakov, D.
1980-01-01
A Space-Point Energy-Group integral transport theory method (SPEG) is developed and applied to the local and global calculations of the Yugoslav RA reactor. Compared to other integral transport theory methods, the SPEG distinguishes by (1) the arbitrary order of the polynomial, (2) the effective determination of integral parameters through point flux values, (3) the use of neutron balance condition. as a posterior measure of the accuracy of the calculation and (4) the elimination of the subdivisions- into zones, in realistic cases. In addition, different direct (collision probability) and indirect (Monte Carlo) approaches to integral transport theory have been investigated and Some effective acceleration procedures introduced. The study was performed on three test problems in plane and cylindrical geometry, as well as on the nine-region cell of the RA reactor. In particular, the limitations of the integral transport theory including its non-applicability to optically large material regions and to global reactor calculations were examined. The proposed strictly multipoint approach, avoiding the subdivision into zones and groups, seems to provide a good starting point to overcome these limitations of the integral transport theory. (author)
14th International Conference on Integral Methods in Science and Engineering
Riva, Matteo; Lamberti, Pier; Musolino, Paolo
2017-01-01
This contributed volume contains a collection of articles on the most recent advances in integral methods. The first of two volumes, this work focuses on the construction of theoretical integral methods. Written by internationally recognized researchers, the chapters in this book are based on talks given at the Fourteenth International Conference on Integral Methods in Science and Engineering, held July 25-29, 2016, in Padova, Italy. A broad range of topics is addressed, such as: • Integral equations • Homogenization • Duality methods • Optimal design • Conformal techniques This collection will be of interest to researchers in applied mathematics, physics, and mechanical and electrical engineering, as well as graduate students in these disciplines, and to other professionals who use integration as an essential tool in their work.
Computer integration of engineering design and production: A national opportunity
1984-01-01
The National Aeronautics and Space Administration (NASA), as a purchaser of a variety of manufactured products, including complex space vehicles and systems, clearly has a stake in the advantages of computer-integrated manufacturing (CIM). Two major NASA objectives are to launch a Manned Space Station by 1992 with a budget of $8 billion, and to be a leader in the development and application of productivity-enhancing technology. At the request of NASA, a National Research Council committee visited five companies that have been leaders in using CIM. Based on these case studies, technical, organizational, and financial issues that influence computer integration are described, guidelines for its implementation in industry are offered, and the use of CIM to manage the space station program is recommended.
An Emerging Integrated Middle-Range Theory on Asian Women's Leadership in Nursing.
Im, Eun-Ok; Broome, Marion E; Inouye, Jillian; Kunaviktikul, Wipada; Oh, Eui Geum; Sakashita, Reiko; Yi, Myungsun; Huang, Lian-Hua; Tsai, Hsiu-Min; Wang, Hsiu-Hung
2018-02-01
Asian cultures reflect patriarchal cultural values and attitudes, which likely have influenced women leaders in their countries differently from women in Western cultures. However, virtually no leadership theories have been developed to reflect the experiences and development of nursing leaders from Asian cultures. The purpose of this article is to present an emerging integrated middle-range theory on Asian women's leadership in nursing. Using an integrative approach, the theory was developed based on three major sources: the leadership frames of Bolman and Deal, literature reviews, and exemplars/cases from five different countries. The theory includes two main domains (leadership frames and leadership contexts). The domain of leadership frames includes human resources/networks, structure/organization, national/international politics, and symbols. The domain of leadership contexts includes cultural contexts, sociopolitical contexts, and gendered contexts. This theory will help understand nursing leadership in Asian cultures and provide directions for future nurse leaders in this ever-changing globalized world.
Integrability in the theory of Schroedinger operator and harmonic analysis
International Nuclear Information System (INIS)
Chalykh, O.A.; Veselov, A.P.
1993-01-01
The algebraic integrability for the Schroedinger equation in R n and the role of the quantum Calogero-Sutherland problem and root systems in this context are discussed. For the special values of the parameters in the potential the explicit formula for the eigenfunction of the corresponding Sutherland operator is found. As an application the explicit formula for the zonal spherical functions on the symmetric spaces SU 2 * n /Sp n (type A II in Cartan notations) is presented. (orig.)
Integrated biocircuits: engineering functional multicellular circuits and devices
Prox, Jordan; Smith, Tory; Holl, Chad; Chehade, Nick; Guo, Liang
2018-04-01
Objective. Implantable neurotechnologies have revolutionized neuromodulatory medicine for treating the dysfunction of diseased neural circuitry. However, challenges with biocompatibility and lack of full control over neural network communication and function limits the potential to create more stable and robust neuromodulation devices. Thus, we propose a platform technology of implantable and programmable cellular systems, namely Integrated Biocircuits, which use only cells as the functional components of the device. Approach. We envision the foundational principles for this concept begins with novel in vitro platforms used for the study and reconstruction of cellular circuitry. Additionally, recent advancements in organoid and 3D culture systems account for microenvironment factors of cytoarchitecture to construct multicellular circuits as they are normally formed in the brain. We explore the current state of the art of these platforms to provide knowledge of their advancements in circuit fabrication and identify the current biological principles that could be applied in designing integrated biocircuit devices. Main results. We have highlighted the exemplary methodologies and techniques of in vitro circuit fabrication and propose the integration of selected controllable parameters, which would be required in creating suitable biodevices. Significance. We provide our perspective and propose new insights into the future of neuromodulaion devices within the scope of living cellular systems that can be applied in designing more reliable and biocompatible stimulation-based neuroprosthetics.
Non-Gaussian path integration in self-interacting scalar field theories
International Nuclear Information System (INIS)
Kaya, Ali
2004-01-01
In self-interacting scalar field theories kinetic expansion is an alternative way of calculating the generating functional for Green's functions where the zeroth order non-Gaussian path integral becomes diagonal in x-space and reduces to the product of an ordinary integral at each point which can be evaluated exactly. We discuss how to deal with such functional integrals and propose a new perturbative expansion scheme which combines the elements of the kinetic expansion with the usual perturbation theory techniques. It is then shown that, when the cutoff dependences of the bare parameters in the potential are chosen to have a well defined non-Gaussian path integral without the kinetic term, the theory becomes trivial in the continuum limit
International Nuclear Information System (INIS)
Lawrence, R.D.; Dorning, J.J.
1980-01-01
A coarse-mesh discrete nodal integral transport theory method has been developed for the efficient numerical solution of multidimensional transport problems of interest in reactor physics and shielding applications. The method, which is the discrete transport theory analogue and logical extension of the nodal Green's function method previously developed for multidimensional neutron diffusion problems, utilizes the same transverse integration procedure to reduce the multidimensional equations to coupled one-dimensional equations. This is followed by the conversion of the differential equations to local, one-dimensional, in-node integral equations by integrating back along neutron flight paths. One-dimensional and two-dimensional transport theory test problems have been systematically studied to verify the superior computational efficiency of the new method