The Luna 16 and Luna 20 samples and their integrated studies in India

International Nuclear Information System (INIS)

Lal, D.

1974-01-01

The results of an integrated study of physical and chemical properties of lunar samples returned to earth by the automatic Soviet stations Luna 16 and 20 carried out with a view to dilineate the evolutionary history of moon, are reported. The nature of the Luna 16 and Luna 20 landing sites and lunar samples, and the manner in which the integrated analyses were planned and executed, are discussed. It is noted that the two lunar missions have provided a wealth of new information in unravelling the early history of planetary formation. (A.K.)

Study on Tourist Carrying Capacity Based on Matter Element Analysis

Institute of Scientific and Technical Information of China (English)

LiuYunguo; FanTing; LiXin; ZhouMing; WangXianhai

2005-01-01

This paper proposes that it is necessary to implement the concept of tourist carrying capacity to facilitate the tourism planning, and presents a method to evaluate the carrying capacity. The method called matter element analysis can solve the uncertain and incompatible problem of the evaluated factors in assessing carrying capacity.The current state of a destination's carrying capacity can be determined by establishing the standard indexes and the matter element model. Through the evaluating of the travel industry zones of the Autonomous Prefecture of Western Hunan, the method is proved to be simple and feasible, and it is improved to be significant for the tourism planning and determination as well as the sustainable development of the regional tourism.

Carrying capacity and tourism planning. case study at Praia Brava- Itajai, in face to the settlement of Canto da Brava Resort

Directory of Open Access Journals (Sweden)

Doris Van de Meene Ruschmann

2008-05-01

Full Text Available Sustainable tourism presumes cultural authenticity, social inclusion, conservation of natural resources and service quality. Those are major issues standing for economical viability in the long run. This article analyzes carrying capacity in Praia Brava, Itajai/SC, evaluating environmental comfort for dwellers as well as for users of the beach building future scenarios as Canto da Brava resort is settled. Tourism carrying capacity is tied to methods of identification and evaluation of environmental indicators. In this case, Cifuentes Method was chosen because it integrates physical, biotical and infra structural factors, through assessment of physical, real and effective carrying capacity. Quantitative results have been considered analyzing impacts and tolerable limits of change taking into account users perception.

Study of information-orientation carry-out plan in energy sector

Energy Technology Data Exchange (ETDEWEB)

Kang, T W [Korea Energy Economics Institute, Euiwang (Korea, Republic of)

1998-04-01

Carrying out an information-orientation plan in the energy sector is indispensable if Korea is to survive in this unlimited competition age and global management system. It is also for maximizing the management efficiency of national energy resources as well as increasing the development of related industries and national welfare. The management of the energy resources sector of Korea, which is becoming diversified escaping from the past simple quantitative management of supplier-orientation, requires versatile and ample high-class information management system and high-level decision support system. In order to satisfy these requests, this study investigated and analyzed overall policies of the energy sector for carrying out information-orientation, neighborhood environment, organizational chart, information transfer method, the current condition of information-orientation, problems and improvements, demand of information-orientation of the future, and also reviewed the information-orientation status of advanced countries. Based on these, an information-orientation carryout plan in the energy sector is broken into three stages of `establishment of information transfer system`, `development of database`, and `establishment of decision support system` and presented per detailed work. It advised manpower, equipment and budget implementation plan, and a development schedule plan required for carrying out information-orientation as well as overall environmental build-up, and policy recommendation for the successful implementation of information-orientation. 24 refs., 27 figs., 15 tabs.

The study of the European Union from outside: European integration studies in Norway and Iceland 1990-2010

OpenAIRE

Eliassen, Kjell; Marino, Marit Sjøvaag; Bergmann, Eirikur

2012-01-01

This is a working paper version of a paper written for SENT - The Network of European Studies. The aim of this chapter is to map the research on European integration carried out by Norwegian and Icelandic researchers and research institutions in the period 1990–2010. This study covers research of central aspects of the European Union itself: institutions, decision-making processes, policies, actors and the relationship to other countries, global and regional institutions and local and regiona...

Categorical and continuous - disentangling the neural correlates of the carry effect in multi-digit addition

Directory of Open Access Journals (Sweden)

Dressel Katharina

2010-11-01

Full Text Available Abstract Background Recently it was suggested that the carry effect observed in addition involves both categorical and continuous processing characteristics. Methods In the present study, we aimed at identifying the specific neural correlates associated with processing either categorical or continuous aspects of the carry effect in an fMRI study on multi-digit addition. Results In line with our expectations, we observed two distinct parts of the fronto-parietal network subserving numerical cognition to be associated with either one of these two characteristics. On the one hand, the categorical aspect of the carry effect was associated with left-hemispheric language areas and the basal ganglia probably reflecting increased demands on procedural and problem solving processes. Complementarily, the continuous aspect of the carry effect was associated with increased intraparietal activation indicating increasing demands on magnitude processing as well as place-value integration with increasing unit sum. Conclusions In summary, the findings suggest representations and processes underlying the carry effect in multi-digit addition to be more complex and interactive than assumed previously.

Carry

DEFF Research Database (Denmark)

Koijen, Ralph S.J.; Moskowitz, Tobias; Pedersen, Lasse Heje

2018-01-01

-sectionally and in time series for a host of different asset classes, including global equities, global bonds, commodities, US Treasuries, credit, and options. Carry is not explained by known predictors of returns from these asset classes, and it captures many of these predictors, providing a unifying framework...... for return predictability. We reject a generalized version of Uncovered Interest Parity and the Expectations Hypothesis in favor of models with varying risk premia, in which carry strategies are commonly exposed to global recession, liquidity, and volatility risks, though none fully explains carry’s premium....

Explicit integration of some integrable systems of classical mechanics

OpenAIRE

Basak Gancheva, Inna

2011-01-01

The main objective of the thesis is the analytical and geometrical study of several integrable finite-dimentional dynamical systems of classical mechanics, which are closely related, namely: - the classical generalization of the Euler top: the Zhukovski-Volterra (ZV) system describing the free motion of a gyrostat, i.e., a rigid body carrying a symmetric rotator whose axis is fixed in the body; - the Steklov-Lyapunov integrable case of the Kirchhoff equations describing the motio...

Philosophy of integrity assessment of engineering components

International Nuclear Information System (INIS)

Chaudhuri, Satyabrata

2008-01-01

Integrity assessment of engineering components in power plants and process industries has attracted global attention from the viewpoint of safety and economy for their optimum utilization. This paper describes some aspects of philosophy of component integrity such as life assessment technology, materials used and the factors limiting the serviceability of the components operating at high temperatures and pressures. Numerous investigations have been carried out all over the world to study changes in microstructure and material property due to prolonged service of the components to decide their further serviceability. This paper includes case studies on integrity assessment of service-exposed components carried out in our laboratory as well

Construction of a novel lentiviral vector carrying human B-domain ...

African Journals Online (AJOL)

... integration were detected in all cell lines after transfection. A novel lentiviral vector carrying human FVIII³BD was constructed, which was able to transfect different mammalian cell types accompanied by high-level activity. This lentiviral vector may provide a theoretical basis for the gene therapy of patients with hemophilia ...

Vehicular Integration of Wireless Power Transfer Systems and Hardware Interoperability Case Studies

Energy Technology Data Exchange (ETDEWEB)

Onar, Omer C [ORNL; Campbell, Steven L [ORNL; Seiber, Larry Eugene [ORNL; White, Cliff P [ORNL; Chinthavali, Madhu Sudhan [ORNL

2016-01-01

Several wireless charging methods are under development or available as an aftermarket option in the light-duty automotive market. However, there are not a sufficient number of studies detailing the vehicle integration methods, particularly a complete vehicle integration with higher power levels. This paper presents the design, development, implementation, and vehicle integration of wireless power transfer (WPT)-based electric vehicle (EV) charging systems for various test vehicles. Before having the standards effective, it is expected that WPT technology first will be integrated as an aftermarket retrofitting approach. Inclusion of this technology on production vehicles is contingent upon the release of the international standards. The power stages of the system are introduced with the design specifications and control systems including the active front-end rectifier with power factor correction, high frequency power inverter, high frequency isolation transformer, coupling coils, vehicle side full-bridge rectifier and filter, and the vehicle battery. The operating principles of the control, and communications, systems are presented. Aftermarket conversion approaches including the WPT on-board charger (OBC) integration, WPT CHAdeMO integration, and WPT direct battery connection scenarios are described. The experiments are carried out using the integrated vehicles and the results obtained to demonstrate the system performance including the stage-by-stage efficiencies.

Studies on solid-state physics carried out with the Saclay reactor (1962)

International Nuclear Information System (INIS)

Herpin, A.

1962-01-01

This paper deals only with solid-state physics experiments carried out on outgoing beams: rather than giving a general review of the work performed, if refers to only a few of the most important studies or those nearest completion. These are being made with the experimental beams of the two Saclay reactors EL-2, with a central flux of 10 13 n/cm 2 , and - since 1958 - EL-3, whose central flux is equal ta 10 14 n/cm 2 . The experiments are being carried out by two separate groups of physicists, employing different techniques, namely neutron diffraction using a crystal spectrometer, and inelastic scattering using a time-of-flight spectrometer. (author) [fr

Transfer of stem cells carrying engineered chromosomes with XY clone laser system.

Science.gov (United States)

Sinko, Ildiko; Katona, Robert L

2011-01-01

Current transgenic technologies for gene transfer into the germline of mammals cause a random integration of exogenous naked DNA into the host genome that can generate undesirable position effects as well as insertional mutations. The vectors used to generate transgenic animals are limited by the amount of foreign DNA they can carry. Mammalian artificial chromosomes have large DNA-carrying capacity and ability to replicate in parallel with, but without integration into, the host genome. Hence they are attractive vectors for transgenesis, cellular protein production, and gene therapy applications as well. ES cells mediated chromosome transfer by conventional blastocyst injection has a limitation in unpredictable germline transmission. The demonstrated protocol of laser-assisted microinjection of artificial chromosome containing ES cells into eight-cell mouse embryos protocol described here can solve the problem for faster production of germline transchromosomic mice.

The flexible application of carrying capacity in ecology

Directory of Open Access Journals (Sweden)

Eric J. Chapman

2018-01-01

Full Text Available Carrying capacity encompasses a broad collection of approaches used to better understand biotic interactions in ecosystems and is often applied with no explicit regard to its historical origin. In this paper, we reviewed the primary literature to examine how carrying capacity is applied in ecology. We focused our review on ecosystem studies—studies that frame their results at the ecosystem level—published after the 1950s and highlight emerging trends of this concept. We found that while carrying capacity offers some underlying commonalities, a wide range of definitions and approaches hinders a unified framework to better understand biotic ecosystem interactions. Not surprisingly, these studies most often use K—the number of individuals that the environment “can support” in a given area—to define carrying capacity, despite considerable ambiguity and uncertainty in this approach. Furthermore, the studies that we reviewed spanned several levels of ecological organization: molecules to communities and up to landscapes. To add further complexity, it is not clear whether carrying capacity was intended as a dynamic concept subject to temporal variability as it was often applied in the reviewed studies. We found that carrying capacity is most often applied to studies in conservation biology, rangeland and wildlife management, aquaculture, and fisheries biology. We explore ecosystem level responses to implications of “carrying capacity” overshoot and discuss proposed mechanisms that govern ecosystem carrying capacity. We discuss the usefulness of the concept and end with suggestions to improve carrying capacity's general application in ecosystem studies. Keywords: Carrying capacity, Conservation biology, Ecosystems, Ecosystem management, Natural resources

Improving integration for integrated coastal zone management: an eight country study.

Science.gov (United States)

Portman, M E; Esteves, L S; Le, X Q; Khan, A Z

2012-11-15

Integrated coastal zone management (ICZM) is a widely accepted approach for sustainable management of the coastal environment. ICZM emphasizes integration across sectors, levels of government, uses, stakeholders, and spatial and temporal scales. While improving integration is central to progress in ICZM, the role of and the achievement of integration remain understudied. To further study these two points, our research analyzes the performance of specific mechanisms used to support ICZM in eight countries (Belgium, India, Israel, Italy, Portugal, Sweden, UK, and Vietnam). The assessment is based on a qualitative comparative analysis conducted through the use of two surveys. It focuses on five ICZM mechanisms (environmental impact assessment; planning hierarchy; setback lines; marine spatial planning, and regulatory commission) and their role in improving integration. Our findings indicate that certain mechanisms enhance specific types of integration more effectively than others. Environmental impact assessment enhances science-policy integration and can be useful to integrate knowledge across sectors. Planning hierarchy and regulatory commissions are effective mechanisms to integrate policies across government levels, with the latter also promoting public-government integration. Setback lines can be applied to enhance integration across landscape units. Marine spatial planning is a multi-faceted mechanism with the potential to promote all types of integration. Policy-makers should adopt the mechanisms that are suited to the type of integration needed. Results of this study also contribute to evidence-based coastal management by identifying the most common impediments related to the mechanisms of integration in the eight studied countries. Copyright © 2012 Elsevier B.V. All rights reserved.

Integrating Gender into World Bank Financed Transport Programs : Component 1. Case Study Summary and Final Report

OpenAIRE

IC Net

2004-01-01

The World Bank in November 2001 commissioned IC Net Limited of Japan to carry out a study titled 'Integrating Gender into World Bank Financed Transport Programs' in accord with the terms of reference (TOR) issued in June 2001. The study was financed by a grant from the Japanese Large Studies Trust Fund. The contract came into effect on 15 December 2001 and covers the period to 15 June 2004...

Kinetic characteristics of the gait of a musician carrying or not his instrument

Directory of Open Access Journals (Sweden)

Carlos Bolli Mota

2009-01-01

Full Text Available The integrity of the locomotor system can be compromised by the transport of certain objects, especially when done in an inadequate manner. Due to their weight and size, the transport of musical instruments can contribute to body dysfunctions in musicians who frequently have to carry their instruments, influencing balance andbody posture. Thus, the soil reaction force was investigated during the gait of a musician carrying or not his instrument. Two AMTI (Advanced Mechanical Technologies, Inc. platforms were used for kinetic data acquisition. A total of 40 measurements were obtainedfor gait and balance: 20 without carrying the instrument and 20 while carrying the instrument. The t test showed significant differences between the two situations for all variables analyzed. The results suggest that the locomotor system suffers alterationswhen carrying any kind of load, as was the case here in which the subject carried 7.75% of his own weight.

Life sciences payload definition and integration study. Volume 3: Preliminary equipment item specification catalog for the carry-on laboratories. [for Spacelab

Science.gov (United States)

1974-01-01

All general purpose equipment items contained in the final carry-on laboratory (COL) design concepts are described in terms of specific requirements identified for COL use, hardware status, and technical parameters such as weight, volume, power, range, and precision. Estimated costs for each item are given, along with projected development times.

Carrying Capacity

DEFF Research Database (Denmark)

Schroll, Henning; Andersen, Jan; Kjærgård, Bente

2012-01-01

A spatial planning act was introduced inIndonesia 1992 and renewed in 2008. It emphasised the planning role of decentralised authorities. The spatial planning act covers both spatial and environmental issues. It defines the concept of carrying capacity and includes definitions of supportive....../cities. Four different sectors (water, food production, waste, and forests) were selected as core areas for decentralised spatial planning. Indicators for SCC and ACC were identified and assessed with regard to relevance and quantifiability. For each of the indicators selected, a legal threshold or guiding...... was introduced inIndonesia 1992 and renewed in 2008. It emphasised the planning role of decentralised authorities. The spatial planning act covers both spatial and environmental issues. It defines the concept of carrying capacity and includes definitions of supportive carrying capacity (SCC) and assimilative...

Basic Study of Establishment of Quality Assurance Processes to Develop an Integrated Quality Assurance System for Nuclear Power Plant Construction

International Nuclear Information System (INIS)

Lim, Byungki; Moon, Byeongsuk; Lee, Jae Kyoung

2014-01-01

An integrated quality assurance system has necessitated carrying out quality assurance programs in a systematic manner because the opportunities to expand business in overseas markets have increased since the export of a nuclear power plant to UAE in 2009. In this study, we use PDCA method to systematically analyze the quality assurance procedures that were used in previous projects for constructing nuclear power plants. We reached a classification system of quality assurance processes at each phase of nuclear power plant construction by integrating similar work related to quality such as planning, design, equipment manufacturing, construction and start-up. We also established a hierarchy of quality assurance processes to develop an integrated quality assurance system as a technology goal to be developed later. To obtain most updated quality assurance activities, a quality assurance process is structured by integrating similar works analyzed from quality assurance procedures through PDCA cycle method. At the implementation phase of Hierarchy of quality processes and sequence of processes for constructing nuclear power plant are established in this study. Integrated quality assurance system is to be developed by connecting organizations as well as stakeholders such as owners, Architect engineering, suppliers, contractors, and sub-contractors to carry out assigned work efficiently

Basic Study of Establishment of Quality Assurance Processes to Develop an Integrated Quality Assurance System for Nuclear Power Plant Construction

Energy Technology Data Exchange (ETDEWEB)

Lim, Byungki; Moon, Byeongsuk; Lee, Jae Kyoung [Korea Hydro and Nuclear Power Co. Ltd., Daejeon (Korea, Republic of)

2014-05-15

An integrated quality assurance system has necessitated carrying out quality assurance programs in a systematic manner because the opportunities to expand business in overseas markets have increased since the export of a nuclear power plant to UAE in 2009. In this study, we use PDCA method to systematically analyze the quality assurance procedures that were used in previous projects for constructing nuclear power plants. We reached a classification system of quality assurance processes at each phase of nuclear power plant construction by integrating similar work related to quality such as planning, design, equipment manufacturing, construction and start-up. We also established a hierarchy of quality assurance processes to develop an integrated quality assurance system as a technology goal to be developed later. To obtain most updated quality assurance activities, a quality assurance process is structured by integrating similar works analyzed from quality assurance procedures through PDCA cycle method. At the implementation phase of Hierarchy of quality processes and sequence of processes for constructing nuclear power plant are established in this study. Integrated quality assurance system is to be developed by connecting organizations as well as stakeholders such as owners, Architect engineering, suppliers, contractors, and sub-contractors to carry out assigned work efficiently.

Measurement and assessment of carrying capacity of the environment in Ningbo, China.

Science.gov (United States)

Liu, R Z; Borthwick, Alistair G L

2011-08-01

Carrying Capacity of the Environment (CCE) provides a useful measure of the sustainable development of a region. Approaches that use integrated assessment instead of measurement can lead to misinterpretation of sustainable development because of confusion between Environmental Stress (ES) indexes and CCE indexes, and the selection of over-simple linear plus models. The present paper proposes a comprehensive measurement system for CCE which comprises models of natural resources capacity, environmental assimilative capacity, ecosystem services capacity, and society supporting capacity. The corresponding measurable indexes are designed to assess CCE using a carrying capacity surplus ratio model and a vector of surplus ratio of carrying capacity model. The former aims at direct comparison of ES and CCE based on the values of basic indexes, and the latter uses a Euclidean vector to assess CCE states. The measurement and assessment approaches are applicable to Strategic Environmental Assessment (SEA) and environmental planning and management. A case study is presented for Ningbo, China, whereby all the basic indexes of ECC are measured and the CCE states assessed for 2005 and 2010. Copyright © 2011 Elsevier Ltd. All rights reserved.

Energetics of load carrying in Nepalese porters.

Science.gov (United States)

Bastien, Guillaume J; Schepens, Bénédicte; Willems, Patrick A; Heglund, Norman C

2005-06-17

Nepalese porters routinely carry head-supported loads equal to 100 to 200% of their body weight (Mb) for many days up and down steep mountain footpaths at high altitudes. Previous studies have shown that African women carry head-supported loads of up to 60% of their Mb far more economically than army recruits carrying equivalent loads in backpacks. Here we show that Nepalese porters carry heavier loads even more economically than African women. Female Nepalese porters, for example, carry on average loads that are 10% of their Mb heavier than the maximum loads carried by the African women, yet do so at a 25% smaller metabolic cost.

Local Dynamic Stability Associated with Load Carrying

Directory of Open Access Journals (Sweden)

Jian Liu

2013-03-01

Conclusion: Current study confirmed the sensitivity of local dynamic stability measure in load carrying situation. It was concluded that load carrying tasks were associated with declined local dynamic stability, which may result in increased risk of fall accident. This finding has implications in preventing fall accidents associated with occupational load carrying.

Path integrals in curvilinear coordinates

International Nuclear Information System (INIS)

Prokhorov, L.V.

1984-01-01

Integration limits are studied for presenting the path integral curvilinear coordinates. For spherical (and topoloqically equivalent) coordinates it is shown that in formulas involving classical action in the exponent integration over all variables should be carried out within infinite limits. Another peculiarity is associated with appearance of the operator q which provides a complete definition of the wave functions out of the physical region. arguments are given upporting the validity of the cited statament in the general case

[Measuring water ecological carrying capacity with the ecosystem-service-based ecological footprint (ESEF) method: Theory, models and application].

Science.gov (United States)

Jiao, Wen-jun; Min, Qing-wen; Li, Wen-hua; Fuller, Anthony M

2015-04-01

Integrated watershed management based on aquatic ecosystems has been increasingly acknowledged. Such a change in the philosophy of water environment management requires recognizing the carrying capacity of aquatic ecosystems for human society from a more general perspective. The concept of the water ecological carrying capacity is therefore put forward, which considers both water resources and water environment, connects socio-economic development to aquatic ecosystems and provides strong support for integrated watershed management. In this paper, the authors proposed an ESEF-based measure of water ecological carrying capacity and constructed ESEF-based models of water ecological footprint and capacity, aiming to evaluate water ecological carrying capacity with footprint methods. A regional model of Taihu Lake Basin was constructed and applied to evaluate the water ecological carrying capacity in Changzhou City which located in the upper reaches of the basin. Results showed that human demand for water ecosystem services in this city had exceeded the supply capacity of local aquatic ecosystems and the significant gap between demand and supply had jeopardized the sustainability of local aquatic ecosystems. Considering aqua-product provision, water supply and pollutant absorption in an integrated way, the scale of population and economy aquatic ecosystems in Changzhou could bear only 54% of the current status.

Study of the Results in the Acquisition of Core Competencies in Schools That Integrate Primary Education and Music

Science.gov (United States)

Andreu Duran, Maria; Godall Castell, Pere; Amador Guillem, Miquel; Castro Morera, Maria

2017-01-01

The goal of this research was to carry out an exploratory study on how music education integrated into primary schooling (children from 6 to 12 years old) can help in acquiring the core competencies characteristic of this stage. The study was conducted by developing a validated instrument, pilot-tested for reliability, to assess the eight core…

The integration of corporate social responsibility into the strategy of technology-intensive firms: a case study

Directory of Open Access Journals (Sweden)

Miha Škerlavaj

2010-06-01

Full Text Available This paper presents a new perspective which calls for an integration of ethics and corporate social responsibility (CSR into the company strategy as a source of competitive advantages. The research question we pose is how a company can successfully carry out this integration of CSR into its strategic management, for which a model that includes three stages – introduction, implementation and generalization of CSR – is presented. Based on an exploratory case study within a Spanish technology-intensive firm (Indra, we show the way this company has developed and implemented an explicit plan for the integration of ethical values and CSR initiatives into its corporate and business strategies. Although this company has established its own methodology in order to develop and implement CSR plans, it fits in essence to our three-stage model of CSR integration. In general, our analyses show a beneficial impact of the development and implementation of CSR plan for this technology-intensive company. In particular, it seems that the CSR plan enables companies to improve its’ internal and external (competitive context through a better exploration and exploitation of knowledge, its stable relationships with stakeholders and the development and improvement of intangible resources such as reputation or social capital. It is also shown that there are important factors to consider in order this process can successfully carried out, such as organizational culture, human resource practices or knowledge management systems. Future research will need to engage in largerscale confirmatory as well as longitudinal studies of the impact of CSR implementation for company performance.

Validating Acquisition IS Integration Readiness with Drills

DEFF Research Database (Denmark)

Wynne, Peter J.

2017-01-01

To companies, mergers and acquisitions are important strategic tools, yet they often fail to deliver their expected value. Studies have shown the integration of information systems is a significant roadblock to the realisation of acquisition benefits, and for an IT department to be ready......), to understand how an IT department can use them to validate their integration plans. The paper presents a case study of two drills used to validate an IT department’s readiness to carry out acquisition IS integration, and suggests seven acquisition IS integration drill characteristics others could utilise when...

Study on ac losses of HTS coil carrying ac transport current

International Nuclear Information System (INIS)

Dai Taozhen; Tang Yuejin; Li Jingdong; Zhou Yusheng; Cheng Shijie; Pan Yuan

2005-01-01

Ac loss has an important influence on the thermal performances of HTS coil. It is necessary to quantify ac loss to ascertain its impact on coil stability and for sizing the coil refrigeration system. In this paper, we analyzed in detail the ac loss components, hysteresis loss, eddy loss and flux flow loss in the pancake HTS coil carrying ac transport current by finite element method. We also investigated the distribution of the ac losses in the coil to study the effects of magnetic field distribution on ac losses

The different services carried out on valves during nuclear power plants refuelling outages. To the Valves Integrated Service; La gestion de las diferentes actividades en valvulas durante las paradas. Hacia el Servicio Integral de Valvulas

Energy Technology Data Exchange (ETDEWEB)

Laporta, J. M.

2007-07-01

The different services carried out on valves during nuclear power plants refuelling outages represent overall one of the activities most interfacing with other refuelling tasks because of the large multidisciplinary teams that participate. Different specialized teams are involved on these activities, mainly on testing, diagnostics and maintenance tasks, performed over the same components, in a sequence of processes closely related with common resources. Under such circumstances, coordination between the different teams intervening and the management of administrative documents and activities in close collaboration with the Control Room is fundamental to ensure that the work is performed in the right sequence avoiding downtimes and optimising the critical path. The integration of these processes and the resources involved allow us to undertake the services globally, forming multidisciplinary teams that optimise resources-fundamentally coordination resources and multi-purpose auxiliary resources-maintaining in all cases the necessary degree of specialisation in keeping with the different tasks making up the Valves Integrated Service. (Author)

A new mosaic integrative and conjugative element from Streptococcus agalactiae carrying resistance genes for chloramphenicol (catQ) and macrolides [mef(I) and erm(TR)].

Science.gov (United States)

Morici, Eleonora; Simoni, Serena; Brenciani, Andrea; Giovanetti, Eleonora; Varaldo, Pietro E; Mingoia, Marina

2017-01-01

To investigate the genetic basis of catQ-mediated chloramphenicol resistance in Streptococcus agalactiae. Two clinical strains of catQ-positive chloramphenicol-resistant S. agalactiae (Sag236 and Sag403) were recently isolated, typed (MLST, PFGE pulsotypes, capsular types) and their antibiotic resistances investigated by phenotypic and genotypic approaches. Several molecular methods (PCR mapping, restriction assays, Southern blotting, sequencing and sequence analysis, conjugal transfer assays) were used to determine the genetic context of catQ and characterize a genetic element detected in the isolates. Sag236 and Sag403 shared the same ST (ST19), but exhibited a different capsular type (III and V, respectively) and pulsotype. Both harboured the macrolide resistance genes mef(I) and erm(TR) and the tetracycline resistance gene tet(M). Accordingly, they were resistant to chloramphenicol, erythromycin and tetracycline. catQ and mef(I) were associated in an IQ module that was indistinguishable in Sag236 and Sag403. In mating assays, chloramphenicol and erythromycin resistance proved transferable, at low frequency, only from Sag236. Transconjugants carried not only catQ and mef(I), but also erm(TR), suggesting a linkage of the three resistance genes in a mobile element, which, though seemingly non-mobile, was also detected in Sag403. The new element (designated ICESag236, ∼110 kb) results from recombination of two integrative and conjugative elements (ICEs) originally described in different streptococcal species: S. agalactiae ICESagTR7, carrying erm(TR); and Streptococcus pneumoniae ICESpn529IQ, carrying the prototype IQ module. These findings strengthen the notion that widespread streptococcal ICEs may form mosaics that enhance their diversity and spread, broaden their host range and carry new cargo genes. © The Author 2016. Published by Oxford University Press on behalf of the British Society for Antimicrobial Chemotherapy. All rights reserved. For Permissions

The study of environmental carrying capacity for sustainable tourism in Telaga Warna Telaga Pengilon Nature Park, Dieng Plateu, Central Java

Science.gov (United States)

Melat Aryasa, Alexander; Nur Bambang, Azis; Muhammad, Fuad

2017-06-01

The increasing in quantity of the tourists visiting Telaga Warna Telaga Pengilon Nature Park, Dieng Plateau, Central Java, can cause a potential threat toward the conservation sustainability of the tourist attraction and the surrounding area. The utilization of conservation area for tourist attraction has to be carried out based on the principal of Environmental Carrying Capacity so that it will not affect the ecosystem. This study aims to determine the value of Telaga Warna Telaga Pengilon Nature Park environmental carrying capacity as a conservation area used for tourism activities. The environmental carrying capacities calculated in this study were physical carrying capacity, real carrying capacity, and effective carrying capacity. Results of this research show that the physical carrying capacity of The Telaga Warna Telaga Pengilon Nature Park was 31,302 visitors, the real capacity was 869 visitors/day and the effective carrying capacity was 579 visitors/day. Thus, the sustainable tourism development strategy is needed to manage the everlasting natural resources.

The Population Growth and Carrying Capacity in Semarang City

Science.gov (United States)

Hariyanto; Hadi, Sudharto P.; Buchori, Imam

2018-02-01

Population growth and development of city activities take some lands to carry them. As a result, land use competition happens among persons, society or sector. Land necessity for settlement, industry, or sector has taken over farm land, therefore farm land has been converted intensively and massively. Chronologically, population growth will cause land necessity increase. Unproductive land, especially farm land will be converted. Furthermore, farm land conversion will cause carrying capacity change. Carrying capacity has certain bio capacity. With the population growth, it will increase resource consumption; on the other side, farm land conversion will decrease carrying capacity. The objective of the study is to know about the influence of population growth towards carrying capacity (bio capacity) in Semarang city. Land consumption per capita is indeed influenced by city population, the higher the population is, the lower the land consumption per capita. With the population growth, it will influence carrying capacity. Carrying capacity here is the ratio of area to population. Analytical descriptive method is applied in the study with all sub-districts in Semarang city as the analysis unit. Population here is sub-district area and population per sub-district in Semarang city. Population growth data period is from 2000 until 2015. Main variables of the study are area per sub-district, population, population growth, carrying capacity. Result of the study shows significant influence of carrying capacity decrease, especially some outskirts in Semarang city. This condition happens because the outskirts in Semarang city tend to have dense population growth. Range of carrying capacity in Semarang city is from 0,007 to 0,117 of 0 to 1. Almost all sub-districts in Semarang city show miserable condition, except Mijen and Tugu. The conclusion of the study is that population will decrease carrying capacity. Therefore, the government should control population growth by paying

Integrating resource, social and managerial indicators of quality into carrying capacity decision making

Science.gov (United States)

Peter Newman; Robert Manning; Bill Valliere

2002-01-01

As use in national parks and related areas continues to rise and visitors and types of activities continue to diversify, we are challenged to balance use and preservation in parks, wilderness and related areas. Faced with these challenges, integrative approaches to defining, monitoring and managing ecological, social and managerial setting attributes is crucial. This...

Impact of Flexibility Options on Grid Economic Carrying Capacity of Solar and Wind: Three Case Studies

Energy Technology Data Exchange (ETDEWEB)

Denholm, Paul [National Renewable Energy Lab. (NREL), Golden, CO (United States); Novacheck, Joshua [National Renewable Energy Lab. (NREL), Golden, CO (United States); Jorgenson, Jennie [National Renewable Energy Lab. (NREL), Golden, CO (United States); O' Connell, Matthew [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2016-12-01

In this study, we attempt to quantify the benefits of various options of grid flexibility by measuring their impact on two measures: economic carrying capacity and system costs. Flexibility can increase economic carrying capacity and reduce overall system costs. In some cases, options that provide a limited increase in economic carrying capacity can provide significant operational savings, thus demonstrating the need to evaluate flexibility options using multiple metrics. The value of flexibility options varies regionally due to different generation mixes and types of renewables. The more rapid decline in PV value compared to wind makes PV more dependent on adding flexibility options, including transmission and energy storage.

Integrated operation of hydro thermal system

International Nuclear Information System (INIS)

Nanthakumar, J.

1994-01-01

Long-term power system expansion planning studies are carried out to meet the electricity requirement in the future. Prior to the expansion planning studies, it is essential to know the energy potential of the existing generating system, especially the hydro power plants. Detailed hydro thermal stimulation studies of the integrated system is therefore carried out to determine the best way to maximise the hydro energy of the existing and committed plants. The results of the integrated system simulated model are stored in numerous files and are available for retrieval. Most important output used for expansion analysis is the energy production of each hydro plant. The annual hydro energy potential of the total hydro system of Sri Lanka for the hydrological year from 1949 to 1988 is given. Hydro condition data with different probability levels are also indicated

Integrated Food studies education and research:

DEFF Research Database (Denmark)

Hansen, Mette Weinreich; Hansen, Stine Rosenlund

2018-01-01

The research group Foodscapes Innovation and Networks has addressed integrated food studies issues in re-search and education since 2010. Based on experiences in the group, this paper aims at discussing the chal-lenges, learning outcomes and potentials for pushing an integrated thinking into rese......The research group Foodscapes Innovation and Networks has addressed integrated food studies issues in re-search and education since 2010. Based on experiences in the group, this paper aims at discussing the chal-lenges, learning outcomes and potentials for pushing an integrated thinking...... into research and education. It also addresses the challenges in integration when the methodological approaches and theoretical frameworks chosen are ontologically and epistemologically different. A discussion of the limitations of integration is thus also part of the paper. The conceptual framework...... of ontonorms (Mol, 2013) is suggested as a common point of departure for a further development of integration. This is suggested relevant due to the fact that it forces different traditions to reflect their own value-related basis and discuss implications of this approach in a broader sense. The common values...

Methodological guide for the integration of the evaluation in the study plan d at “Nancy Uranga Romagoza” Faculty

Directory of Open Access Journals (Sweden)

Bienvenido Emilio Viera-Sánchez

2013-08-01

Full Text Available The integrating evaluation conception in the Study Plan D of the Physical Culture career will be always a pertinent and current topic, according to the new orientations about evaluation which indicate the final test realization in all subjects. This fact demands from a revision of the integration as a way to establish an appropriate equilibration of the evaluation in the academic year, as well as the inclusion of the state test like a form of studies' ending, occasion when the student shall solve a physical culture problem in one of the professional performance fields, which solution will certainly have a remarkable integrating character. As a result of a carried out study there is an instructive material for the teachers that contains different ways to integrate the contents of the subjects, disciplines and academic years in the third school year integrating test of Physical Education Didactics. In this kind of evaluation it can be better seen the students' difficulties on professional competences. Besides the exam's numbers reduced and the self preparation time saving, as well as result's quality are improved.

A Pilot Study On A Moment Carrying Beam-column Connection For Precast Structures

OpenAIRE

Kaplan, Vedat

2010-01-01

In this study, a moment carrying beam-column connection detail for precast structures has been investigated in the experimental and analytical manner. The 1/2 scaled beam-column test specimen is representing a real exterior precast connection detail. The cast-in-situ welded connection is applied at bottom face of the beams and additional re-bars and cast-in-situ concrete is introduced at the upper part of the beams. The experimental study is conducted in the form of varying beam top diplaceme...

Summaries of studies carried out in the NKS/BOK-2 project. Technical report

International Nuclear Information System (INIS)

Palsson, S.E.

2002-12-01

Summaries of studies carried out in the NKSBOK-2 project, Radiological and Environmental Consequences. The structure of the project as such is described in NKS-64, Radiological and Environmental Consequences - Final Report of the Nordic Nuclear Safety Research Project BOK-2. That report also includes compilations based on the summaries presented in this report. The project was carried out 1998-2001 with participants from all the Nordic countries. Representatives from the Baltic States were also invited to some of the meetings and seminars. The project consisted of work on terrestrial and marine radioecology and had a broad scope in order to enable participation of research groups with various fields of interest. The topics included improving assessment of old and recent fallout, use of radionuclides as tracers in Nordic marine areas, improving assessment of internal doses and use of mass spectrometry in radioecology. This report is a compilation of summaries from each research group, 32 papers in all, and gives references to papers published in scientific journals. Some of the studies have been described previously, at least to some degree, in NKS-70, Proceedings of the 8 th Nordic Seminar on Radioecology, 25-28 February 2001, Rovaniemi, Finland. (au)

Collaborative agency to support integrated care for children, young people and families: an action research study.

Science.gov (United States)

Stuart, Kaz

2014-04-01

Collaboration was legislated in the delivery of integrated care in the early 2000s in the UK. This research explored how the reality of practice met the rhetoric of collaboration. The paper is situated against a theoretical framework of structure, agency, identity and empowerment. Collectively and contextually these concepts inform the proposed model of 'collaborative agency' to sustain integrated care. The paper brings sociological theory on structure and agency to the dilemma of collaboration. Participative action research was carried out in collaborative teams that aspired to achieve integrated care for children, young people and families between 2009 and 2013. It was a part time, PhD study in collaborative practice. The research established that people needed to be able to be jointly aware of their context, to make joint decisions, and jointly act in order to deliver integrated services, and proposes a model of collaborative agency derived from practitioner's experiences and integrated action research and literature on agency. The model reflects the effects of a range of structures in shaping professional identity, empowerment, and agency in a dynamic. The author proposes that the collaborative agency model will support integrated care, although this is, as yet, an untested hypothesis.

Subjective and objective analysis of three water pump systems carried by forest firefighters.

Science.gov (United States)

Moser, Daniel J; Graham, Ryan B; Stevenson, Joan M; Costigan, Patrick A

2014-01-01

The Mark 3 (M3) water power pump is an integral piece of wildfire fighting equipment. However, it is provided to fire stations without a carrying harness. The currently-used carrying harness is very uncomfortable, especially when carrying the pumps considerable distance in a forest to reach a water source. The purpose of this study was to advise the Ontario Ministry of Natural Resources on the selection of a new M3 load carriage system. Twenty Fire Rangers wore the three systems (Original, Prototype, and Modified) through a circuit of tasks representative of their working environment. Subjective and objective approaches were combined to assess and rank the M3 carriage systems. Subjective visual analogue scale ratings were obtained for ease of loading/unloading, comfort, system stability, and overall performance. Tri-axial accelerometers were mounted on each pump and at the sternum of each participant to determine relative pump-carrier accelerations. Overall, the Prototype was ranked as the best system; it resulted in the lowest relative pump-carrier accelerations on 10 out of 15 objective measures, and also received a first place ranking on all subjective measures. It was recommended that the Prototype be implemented as the M3 carriage system for fire suppression teams.

Integrated environmental monitoring and multivariate data analysis-A case study.

Science.gov (United States)

Eide, Ingvar; Westad, Frank; Nilssen, Ingunn; de Freitas, Felipe Sales; Dos Santos, Natalia Gomes; Dos Santos, Francisco; Cabral, Marcelo Montenegro; Bicego, Marcia Caruso; Figueira, Rubens; Johnsen, Ståle

2017-03-01

The present article describes integration of environmental monitoring and discharge data and interpretation using multivariate statistics, principal component analysis (PCA), and partial least squares (PLS) regression. The monitoring was carried out at the Peregrino oil field off the coast of Brazil. One sensor platform and 3 sediment traps were placed on the seabed. The sensors measured current speed and direction, turbidity, temperature, and conductivity. The sediment trap samples were used to determine suspended particulate matter that was characterized with respect to a number of chemical parameters (26 alkanes, 16 PAHs, N, C, calcium carbonate, and Ba). Data on discharges of drill cuttings and water-based drilling fluid were provided on a daily basis. The monitoring was carried out during 7 campaigns from June 2010 to October 2012, each lasting 2 to 3 months due to the capacity of the sediment traps. The data from the campaigns were preprocessed, combined, and interpreted using multivariate statistics. No systematic difference could be observed between campaigns or traps despite the fact that the first campaign was carried out before drilling, and 1 of 3 sediment traps was located in an area not expected to be influenced by the discharges. There was a strong covariation between suspended particulate matter and total N and organic C suggesting that the majority of the sediment samples had a natural and biogenic origin. Furthermore, the multivariate regression showed no correlation between discharges of drill cuttings and sediment trap or turbidity data taking current speed and direction into consideration. Because of this lack of correlation with discharges from the drilling location, a more detailed evaluation of chemical indicators providing information about origin was carried out in addition to numerical modeling of dispersion and deposition. The chemical indicators and the modeling of dispersion and deposition support the conclusions from the multivariate

Development of safety analysis technology for integral reactor

International Nuclear Information System (INIS)

Kim, Hee Cheol; Kim, K. K.; Kim, S. H.

2002-04-01

The state-of-the-arts for the integral reactor was performed to investigate the safety features. The safety and performance of SMART were assessed using the technologies developed during the study. For this purpose, the computer code system and the analysis methodology were developed and the safety and performance analyses on SMART basic design were carried out for the design basis event and accident. The experimental facilities were designed for the core flow distribution test and the self-pressurizing pressurizer performance test. The tests on the 2-phase critical flow with non-condensable gas were completed and the results were used to assess the critical flow model. Probabilistic Safety Assessment(PSA) was carried out to evaluate the safety level and to optimize the design by identifying and remedying any weakness in the design. A joint study with KINS was carried out to promote licensing environment. The generic safety issues of integral reactors were identified and the solutions were formulated. The economic evaluation of the SMART desalination plant and the activities related to the process control were carried out in the scope of the study

Techno-economic feasibility study of the integration of a commercial small-scale ORC in a real case study

International Nuclear Information System (INIS)

Cavazzini, G.; Dal Toso, P.

2015-01-01

Highlights: • The integration of a small-scale commercial ORC in a real case study was analyzed. • The possibility of recovering the waste heat produced by an ICE was considered. • A semi-empirical steady-state model of the commercial small scale ORC was created. • Both direct and indirect costs was considered in the business model. • The ORC integration was not economically feasible due to increased indirect costs. - Abstract: The ORC certainly represents a promising solution for recovering low-grade waste heat in industries. However, the efficiency of commercial small-scale ORC solutions is still too low in comparison with the high initial costs of the machine and the lack of simulation models specifically developed for commercial ORC systems prevents industries from defining an accurate business model to correctly evaluate the ORC integration in real industrial processes. This paper presents a techno-economic feasibility analysis of the integration of a small-scale commercial ORC in a real case study, represented by a highly-efficient industrial distillery. The integration is aimed at maximizing the electricity auto-production by exploiting the heat produced by an internal combustion engine, already partially recovered in internal thermal processes. To analyze the influence of the ORC integration on the industrial processes, a semi-empirical steady-state model of the commercial small scale ORC was created. The model made it possible to simulate the performance of the commercial ORC within a hypothetical scenario involving the use of the heat from the cooling water and from the exhaust gases of the internal combustion engine. A detailed thermo-dynamic analysis has been carried out to study the effects of the ORC integration on the plant’s energy system with particular focus on the two processes directly affected by ORC integration, namely vapor production and the drying process of the grape marc. The analysis highlighted the great importance in the

Integrated care reform in urban China: a qualitative study on design, supporting environment and implementation.

Science.gov (United States)

Qian, Yi; Hou, Zhiyuan; Wang, Wei; Zhang, Donglan; Yan, Fei

2017-10-25

Initiatives on integrated care between hospitals and community health centers (CHCs) have been introduced to transform the current fragmented health care delivery system into an integrated system in China. Up to date no research has analyzed in-depth the experiences of these initiatives based on perspectives from various stakeholders. This study analyzed the integrated care pilot in Hangzhou City by investigating stakeholders' perspectives on its design features and supporting environment, their acceptability of this pilot, and further identifying the enabling and constraining factors that may influence the implementation of the integrated care reform. The qualitative study was carried out based on in-depth interviews and focus group discussions with 50 key informants who were involved in the policy-making process and implementation. Relevant policy documents were also collected for analysis. The pilot in Hangzhou was established as a CHC-led delivery system based on cooperation agreement between CHCs and hospitals to deliver primary and specialty care together for patients with chronic diseases. An innovative learning-from-practice mentorship system between specialists and general practitioners was also introduced to solve the poor capacity of general practitioners. The design of the pilot, its governance and organizational structure and human resources were enabling factors, which facilitated the integrated care reform. However, the main constraining factors were a lack of an integrated payment mechanism from health insurance and a lack of tailored information system to ensure its sustainability. The integrated care pilot in Hangzhou enabled CHCs to play as gate-keeper and care coordinator for the full continuum of services across the health care providers. The government put integrated care a priority, and constructed an efficient design, governance and organizational structure to enable its implementation. Health insurance should play a proactive role, and

Attitude towards New Packaging to Reduce Condom-carrying Embarrassment among Thai Youth, A Cross-sectional Study

Directory of Open Access Journals (Sweden)

Apinut Wongkietkachorn

2014-06-01

Full Text Available Background: Human Immunodeficiency Virus (HIV incidence has been increasing in Thai youth, mostly from unsafe sex. Embarrassment with carrying condom was one of the main reasons. This study aims to evaluate attitude towards condom use, sexual behavior and the new condom packaging that merges with daily life products in Thai youth. Methods: A cross-sectional study was conducted among volunteers aged 15-24. New packaging were demonstrated and the volunteers were provided with questionnaires to complete in privacy booth and submit anonymously. Results: Of 680 participants with mean age of 19.7±2.7 years and 59.9% females, half of them thought condom should be carried and used. However, the same group did not actually do. Two-thirds of participants were interested and would use the packaging, citing these reasons charming, convenience, and disguise of condom. Females preferred the packaging significantly more than males. Conclusion: Disguising condom packaging, as phone charm and key ring, might be another safe and practical way to encourage youth to carry condoms around.

Integrated nonthermal treatment system study

International Nuclear Information System (INIS)

Biagi, C.; Bahar, D.; Teheranian, B.; Vetromile, J.; Quapp, W.J.; Bechtold, T.; Brown, B.; Schwinkendorf, W.; Swartz, G.

1997-01-01

This report presents the results of a study of nonthermal treatment technologies. The study consisted of a systematic assessment of five nonthermal treatment alternatives. The treatment alternatives consist of widely varying technologies for safely destroying the hazardous organic components, reducing the volume, and preparing for final disposal of the contact-handled mixed low-level waste (MLLW) currently stored in the US Department of Energy complex. The alternatives considered were innovative nonthermal treatments for organic liquids and sludges, process residue, soil and debris. Vacuum desorption or various washing approaches are considered for treatment of soil, residue and debris. Organic destruction methods include mediated electrochemical oxidation, catalytic wet oxidation, and acid digestion. Other methods studied included stabilization technologies and mercury separation of treatment residues. This study is a companion to the integrated thermal treatment study which examined 19 alternatives for thermal treatment of MLLW waste. The quantities and physical and chemical compositions of the input waste are based on the inventory database developed by the US Department of Energy. The Integrated Nonthermal Treatment Systems (INTS) systems were evaluated using the same waste input (2,927 pounds per hour) as the Integrated Thermal Treatment Systems (ITTS). 48 refs., 68 figs., 37 tabs

Integrated nonthermal treatment system study

Energy Technology Data Exchange (ETDEWEB)

Biagi, C.; Bahar, D.; Teheranian, B.; Vetromile, J. [Morrison Knudsen Corp. (United States); Quapp, W.J. [Nuclear Metals (United States); Bechtold, T.; Brown, B.; Schwinkendorf, W. [Lockheed Martin Idaho Technologies Co., Idaho Falls, ID (United States); Swartz, G. [Swartz and Associates (United States)

1997-01-01

This report presents the results of a study of nonthermal treatment technologies. The study consisted of a systematic assessment of five nonthermal treatment alternatives. The treatment alternatives consist of widely varying technologies for safely destroying the hazardous organic components, reducing the volume, and preparing for final disposal of the contact-handled mixed low-level waste (MLLW) currently stored in the US Department of Energy complex. The alternatives considered were innovative nonthermal treatments for organic liquids and sludges, process residue, soil and debris. Vacuum desorption or various washing approaches are considered for treatment of soil, residue and debris. Organic destruction methods include mediated electrochemical oxidation, catalytic wet oxidation, and acid digestion. Other methods studied included stabilization technologies and mercury separation of treatment residues. This study is a companion to the integrated thermal treatment study which examined 19 alternatives for thermal treatment of MLLW waste. The quantities and physical and chemical compositions of the input waste are based on the inventory database developed by the US Department of Energy. The Integrated Nonthermal Treatment Systems (INTS) systems were evaluated using the same waste input (2,927 pounds per hour) as the Integrated Thermal Treatment Systems (ITTS). 48 refs., 68 figs., 37 tabs.

Leading with integrity: a qualitative research study.

Science.gov (United States)

Storr, Loma

2004-01-01

This research paper gives an account of a study into the relationship between leadership and integrity. There is a critical analysis of the current literature for effective, successful and ethical leadership particularly, integrity. The purpose and aim of this paper is to build on the current notions of leadership within the literature, debate contemporary approaches, focussing specifically on practices within the UK National Health Service in the early 21st century. This leads to a discussion of the literature on ethical leadership theory, which includes public service values, ethical relationships and leading with integrity. A small study was undertaken consisting of 18 interviews with leaders and managers within a District General HospitaL Using the Repertory Grid technique and analysis 15 themes emerged from the constructs elicited, which were compared to the literature for leadership and integrity and other studies. As well as finding areas of overlap, a number of additional constructs were elicited which suggested that effective leadership correlates with integrity and the presence of integrity will improve organisational effectiveness. The study identified that perceptions of leadership character and behaviour are used to judge the effectiveness and integrity of a leader. However, the ethical implications and consequences of leaders' scope of power and influence such as policy and strategy are somewhat neglected and lacking in debate. The findings suggest that leaders are not judged according to the ethical nature of decision making, and leading and managing complex change but that the importance of integrity and ethical leadership correlated with higher levels of hierarchical status and that it is assumed by virtue of status and success that leaders lead with integrity. Finally, the findings of this study seem to suggest that nurse leadership capability is developing as a consequence of recent national investment.

Study on systematic integration technology of design and safety assessment for HLW geological disposal. 2. Research document

International Nuclear Information System (INIS)

Ishihara, Yoshinao; Fukui, Hiroshi; Sagawa, Hiroshi; Matsunaga, Kenichi; Ito, Takaya; Kohanawa, Osamu; Kuwayama, Yuki

2003-02-01

The present study was carried out relating to basic design of the Geological Disposal Technology Integration System' that will be systematized as knowledge base for design analysis and safety assessment of HLW geological disposal system by integrating organically and hierarchically various technical information in three study field. The key conclusions are summarized as follows: (1) As referring to the current performance assessment report, the technical information for R and D program of HLW geological disposal system was systematized hierarchically based on summarized information in a suitable form between the work flow (work item) and processes/characteristic flow (process item). (2) As the result of the systematized technical information, database structure and system functions necessary for development and construction to the computer system were clarified in order to secure the relation between technical information and data set for assessment of HLW geological disposal system. (3) The control procedure for execution of various analysis code used by design and safety assessment in HLW geological disposal study was arranged possibility in construction of 'Geological Disposal Technology Integration System' after investigating the distributed computing technology. (author)

Integrated study of basins in the Four Corners region

Science.gov (United States)

Fagbola, Olamide Olawumi

2007-12-01

This dissertation is an integrated study of basins in the four corners area of the central part of the Colorado Plateau. The Colorado Plateau is a structurally unique part of the Rocky Mountain region because it has only been moderately deformed when compared to the more intensely deformed areas around it. The Colorado Plateau covers a portion of Utah, Colorado, New Mexico and Arizona. The study area extends from latitude 34°N-40°N to longitude 106°W-111W° encompassing a series of major basins and uplifts: the San Juan, Black Mesa, Paradox, and the Blanding basins; and the Zuni, Defiance, Four Corners, Monument uplifts and the San Juan dome and volcanic field. An analysis of gravity anomalies, basement and crustal structure for basins in the four corners region was carried out. This involved using gravity, magnetic, well, outcrop, seismic estimates of crustal thickness, and geologic data in an integrated fashion. Six filtered gravity and three filtered magnetic maps were generated to aid in the interpretation of the gravity and magnetic anomalies in the study area. A detailed comparison of these maps was carried out. The results show a deep seated mafic structure in the basement acting as a crustal boundary separating the high gravity anomalies from the low. These maps also show that the sources of these anomalies are quite shallow resulting from the upper crust in the study area. The structures in the study area are characterized by northwest and northeast trends which correspond to the Precambrian and the Late Paleozoic structures, respectively. A crustal thickness map of the area was also constructed from seismic estimates of crustal thickness. A comparison was done between the crustal thickness map and the 45 km upward continuation Bouguer anomaly map. The result of this comparison shows that areas of thicker ix crust corresponded to low gravity while areas of thinner crust means mantle material is closer to the surface, thereby producing a high gravity

Study on tourist carrying capacity of sustainable tourism---by taking Qingliang Mountain in the south-eastern china as an example

Science.gov (United States)

Jin, Shenglang; Liu, Ting

2017-05-01

This paper analyzed measurable problems of tourist carrying capacity and then studied the corresponding measures by adopting theories and methods of environment sciences. Tourist carrying capacity of Qingliang Mountain was studied by analyzing the system of tourism environment capacity. The results showed that the level of service was 9726, which was smaller than the ecological carrying capacity of 12894. The facilities and spatial capacity were identified as key factors to limit the tourist carrying capacity in Qingliang Mountain. Some advices and measures including newly built and rebuilt basic facilities, construction of management methods for slack and peak tourist season respectively, construction of new sight spot and touring path were discussed to improve the tourist carrying capacity of Qingliang Mountain and solve the problems of overloading of tourists in the peak season.

Ecological carrying capacity assessment of diving site: A case study of Mabul Island, Malaysia.

Science.gov (United States)

Zhang, Li-Ye; Chung, Shan-Shan; Qiu, Jian-Wen

2016-12-01

Despite considered a non-consumptive use of the marine environment, diving-related activities can cause damages to coral reefs. It is imminent to assess the maximum numbers of divers that can be accommodated by a diving site before it is subject to irreversible deterioration. This study aimed to assess the ecological carrying capacity of a diving site in Mabul Island, Malaysia. Photo-quadrat line transect method was used in the benthic survey. The ecological carrying capacity was assessed based on the relationship between the number of divers and the proportion of diver damaged hard corals in Mabul Island. The results indicated that the proportion of diver damaged hard corals occurred exponentially with increasing use. The ecological carrying capacity of Mabul Island is 15,600-16,800 divers per diving site per year at current levels of diver education and training with a quarterly threshold of 3900-4200 per site. Our calculation shows that management intervention (e.g. limiting diving) is justified at 8-14% of hard coral damage. In addition, the use of coral reef dominated diving sites should be managed according to their sensitivity to diver damage and the depth of the reefs. Copyright © 2016 Elsevier Ltd. All rights reserved.

BLOOD SUBSTITUTES: EVOLUTION FROM NON-CARRYING TO OXYGEN AND GAS CARRYING FLUIDS

Science.gov (United States)

Cabrales, Pedro; Intaglietta, Marcos

2013-01-01

The development of oxygen (O2) carrying blood substitutes has evolved from the goal of replicating blood O2 transports properties to that of preserving microvascular and organ function, reducing the inherent or potential toxicity of the material used to carry O2, and treating pathologies initiated by anemia and hypoxia. Furthermore, the emphasis has shifted from blood replacement fluid to “O2 therapeutics” that restore tissue oxygenation to specific tissues regions. This review covers the different alternatives, potential and limitations of hemoglobin based O2 carriers (HBOCs) and perfluorocarbon based O2 carriers (PFCOCs), with emphasis on the physiological conditions disturbed in the situation that they will be used. It describes how concepts learned from plasma expanders without O2 carrying capacity can be applied to maintain O2 delivery and summarizes the microvascular responses due to HBOCs and PFCOCs. This review also presents alternative applications of HBOCs and PFCOCs namely: 1) How HBOC O2 affinity can be engineered to target O2 delivery to hypoxic tissues; and 2) How the high gas solubility of PFCOCs provides new opportunities for carrying, dissolving and delivering gases with biological activity. It is concluded that current blood substitutes development has amplified their applications horizon by devising therapeutic functions for oxygen carriers requiring limited O2 delivery capacity restoration. Conversely, full, blood-like O2 carrying capacity re-establishment awaits control of O2 carrier toxicity. PMID:23820271

CanWEA Pan-Canadian wind integration study paper

Energy Technology Data Exchange (ETDEWEB)

Tremblay, Martin [GL Garrad Hassan Canada Inc, Ottawa, ON (Canada); Gardner, Paul [GL Garrad Hassan and Partners, Glasgow (United Kingdom); Price, Doug; Le, Don [GL Garrad Hassan America, San Diego, CA (United States)

2010-07-01

GL Garrad Hassan has been contracted by CanWEA to undertake a scoping study for a future Pan-Canadian Wide-Scale Wind Integration Study. The scoping study provides the methodology and the rationale on which the actual wind integration study and request for proposals will be based on. Major system operators and owners of each Canadian Province along with experts involved in major US wind integration studies have been consulted and contributed to the decisional process. This paper provides a summary of the factors considered in the study and outline the actual methodology that was adopted for the future Pan-Canadian wind integration study. (orig.)

Macrolide resistance gene erm(TR) and erm(TR)-carrying genetic elements in Streptococcus agalactiae: characterization of ICESagTR7, a new composite element containing IMESp2907.

Science.gov (United States)

Mingoia, Marina; Morici, Eleonora; Marini, Emanuela; Brenciani, Andrea; Giovanetti, Eleonora; Varaldo, Pietro E

2016-03-01

The objective of this study was to investigate macrolide-resistant Streptococcus agalactiae isolates harbouring erm(TR), an erm(A) gene subclass, with emphasis on their erm(TR)-carrying genetic elements. Four erm(TR)-carrying elements have been described to date: three closely related (ICE10750-RD.2, Tn1806 and ICESp1108) in Streptococcus pyogenes, Streptococcus pneumoniae and S. pyogenes, respectively; and one completely different (IMESp2907, embedded in ICESp2906 to form ICESp2905) in S. pyogenes. Seventeen macrolide-resistant erm(TR)-positive S. agalactiae isolates were phenotypically and genotypically characterized. Their erm(TR)-carrying elements were explored by analysing the distinctive recombination genes of known erm(TR)-carrying integrative and conjugative elements (ICEs) and by PCR mapping. The new genetic context and organization of IMESp2907 in S. agalactiae were explored using several experimental procedures and in silico analyses. Five isolates harboured ICE10750-RD.2/Tn1806, five isolates harboured ICESp1108 and five isolates bore unknown erm(TR)-carrying elements. The remaining two isolates, exhibiting identical serotypes and pulsotypes, harboured IMESp2907 in a new genetic environment, which was further investigated in one of the two isolates, SagTR7. IMESp2907 was circularizable in S. agalactiae, as described in S. pyogenes. The new IMESp2907 junctions were identified based on its site-specific integration; the att sites were almost identical to those in S. pyogenes. In strain SagTR7, erm(TR)-carrying IMESp2907 was embedded in an erm(TR)-less internal element related to ICE10750-RD.2/Tn1806, which, in turn, was embedded in an ICESde3396-like element. The resulting whole ICE, ICESagTR7 (∼129 kb), was integrated into the chromosome downstream of the rplL gene, and was excisable in circular form and transferable by conjugation. This is the first study exploring erm(TR)-carrying genetic elements in S. agalactiae. © The Author 2015. Published by

Testing an integrated behavioural and biomedical model of disability in N-of-1 studies with chronic pain.

Science.gov (United States)

Quinn, Francis; Johnston, Marie; Johnston, Derek W

2013-01-01

Previous research has supported an integrated biomedical and behavioural model explaining activity limitations. However, further tests of this model are required at the within-person level, because while it proposes that the constructs are related within individuals, it has primarily been tested between individuals in large group studies. We aimed to test the integrated model at the within-person level. Six correlational N-of-1 studies in participants with arthritis, chronic pain and walking limitations were carried out. Daily measures of theoretical constructs were collected using a hand-held computer (PDA), the activity was assessed by self-report and accelerometer and the data were analysed using time-series analysis. The biomedical model was not supported as pain impairment did not predict activity, so the integrated model was supported partially. Impairment predicted intention to move around, while perceived behavioural control (PBC) and intention predicted activity. PBC did not predict activity limitation in the expected direction. The integrated model of disability was partially supported within individuals, especially the behavioural elements. However, results suggest that different elements of the model may drive activity (limitations) for different individuals. The integrated model provides a useful framework for understanding disability and suggests interventions, and the utility of N-of-1 methodology for testing theory is illustrated.

Collaborative agency to support integrated care for children, young people and families: an action research study

Directory of Open Access Journals (Sweden)

Karen Stuart

2014-05-01

Full Text Available Introduction: Collaboration was legislated in the delivery of integrated care in the early 2000s in the UK. This research explored how the reality of practice met the rhetoric of collaboration.Theory: The paper is situated against a theoretical framework of structure, agency, identity and empowerment. Collectively and contextually these concepts inform the proposed model of ‘collaborative agency’ to sustain integrated care. The paper brings sociological theory on structure and agency to the dilemma of collaboration.Methods: Participative action research was carried out in collaborative teams that aspired to achieve integrated care for children, young people and families between 2009 and 2013. It was a part time, PhD study in collaborative practice.Results: The research established that people needed to be able to be jointly aware of their context, to make joint decisions, and jointly act in order to deliver integrated services, and proposes a model of collaborative agency derived from practitioner’s experiences and integrated action research and literature on agency. The model reflects the effects of a range of structures in shaping professional identity, empowerment, and agency in a dynamic. The author proposes that the collaborative agency model will support integrated care, although this is, as yet, an untested hypothesis.

Collaborative agency to support integrated care for children, young people and families: an action research study

Directory of Open Access Journals (Sweden)

Karen Stuart

2014-05-01

Full Text Available Introduction: Collaboration was legislated in the delivery of integrated care in the early 2000s in the UK. This research explored how the reality of practice met the rhetoric of collaboration. Theory: The paper is situated against a theoretical framework of structure, agency, identity and empowerment. Collectively and contextually these concepts inform the proposed model of ‘collaborative agency’ to sustain integrated care. The paper brings sociological theory on structure and agency to the dilemma of collaboration. Methods: Participative action research was carried out in collaborative teams that aspired to achieve integrated care for children, young people and families between 2009 and 2013. It was a part time, PhD study in collaborative practice. Results: The research established that people needed to be able to be jointly aware of their context, to make joint decisions, and jointly act in order to deliver integrated services, and proposes a model of collaborative agency derived from practitioner’s experiences and integrated action research and literature on agency. The model reflects the effects of a range of structures in shaping professional identity, empowerment, and agency in a dynamic. The author proposes that the collaborative agency model will support integrated care, although this is, as yet, an untested hypothesis.

Derivation, Characterization, and Neural Differentiation of Integration-Free Induced Pluripotent Stem Cell Lines from Parkinson's Disease Patients Carrying SNCA, LRRK2, PARK2, and GBA Mutations

DEFF Research Database (Denmark)

Momcilovic, Olga; Sivapatham, Renuka; Oron, Tal Ronnen

2016-01-01

We report generation of induced pluripotent stem cell (iPSC) lines from ten Parkinson's disease (PD) patients carrying SNCA, PARK2, LRRK2, and GBA mutations, and one age-matched control. After validation of pluripotency, long-term genome stability, and integration-free reprogramming, eight...... not be sufficient to determine the cause or mechanism of the disease, and highlights the need to use more focused strategies for large-scale data analysis........ We further examined gene expression in a stress model (MPTP-induced dopaminergic neuronal death) using two clones from the SNCA triplication line, and detected changes in genes associated with mitophagy. Our data suggested that even a well-characterized line of a monogenic disease may...

On New Families of Integrals in Analytical Studies of Superconductors within the Conformal Transformation Method

Directory of Open Access Journals (Sweden)

Ryszard Gonczarek

2015-01-01

Full Text Available We show that, by applying the conformal transformation method, strongly correlated superconducting systems can be discussed in terms of the Fermi liquid with a variable density of states function. Within this approach, it is possible to formulate and carry out purely analytical study based on a set of fundamental equations. After presenting the mathematical structure of the s-wave superconducting gap and other quantitative characteristics of superconductors, we evaluate and discuss integrals inherent in fundamental equations describing superconducting systems. The results presented here extend the approach formulated by Abrikosov and Maki, which was restricted to the first-order expansion. A few infinite families of integrals are derived and allow us to express the fundamental equations by means of analytical formulas. They can be then exploited in order to find quantitative characteristics of superconducting systems by the method of successive approximations. We show that the results can be applied in studies of high-Tc superconductors and other superconducting materials of the new generation.

Optical Carry Adder.

Science.gov (United States)

1987-03-01

AOM’s) with the deflected beam as the modulator "on" state. These AOM’s ( TeO2 crystals, manufactured by Newport E.O. Systems) have high deflection...caused by the slow acoustic propagation (4.2 - 105 cm/s for TeO2 ), but this delay can be minimized by placing the laser beam close to the acoustic...dependent jitter in the optical carry to below 1 ns, the total carry path must be less than 30 cm long (or 20 cm in glass , 14 cm in LiNbO 3). Thus, a 32

Foundation integrity assessment using integrated geophysical and geotechnical techniques: case study in crystalline basement complex, southwestern Nigeria

Science.gov (United States)

Olayanju, G. M.; Mogaji, K. A.; Lim, H. S.; Ojo, T. S.

2017-06-01

The determination of parameters comprising exact depth to bedrock and its lithological type, lateral changes in lithology, and detection of fractures, cracks, or faults are essential to designing formidable foundations and assessing the integrity of civil engineering structures. In this study, soil and site characterization in a typical hard rock geologic terrain in southwestern Nigeria were carried out employing integrated geophysical and geotechnical techniques to address tragedies in civil engineering infrastructural development. The deployed geophysical measurements involved running both very low frequency electromagnetic (VLF-EM) and electrical resistivity methods (dipole-dipole imaging and vertical electrical sounding (VES) techniques) along the established traverses, while the latter technique entailed conducting geological laboratory sieve analysis and Atterberg limit-index tests upon the collected soil samples in the area. The results of the geophysical measurement, based on the interpreted VLF-EM and dipole-dipole data, revealed conductive zones and linear features interpreted as fractures/faults which endanger the foundations of public infrastructures. The delineation of four distinct geoelectric layers in the area—comprised of topsoil, lateritic/clayey substratum, weathered layer, and bedrock—were based on the VES results. Strong evidence, including high degree of decomposition and fracturing of underlying bedrock revealed by the VES results, confirmed the VLF-EM and dipole-dipole results. Furthermore, values in the range of 74.2%-77.8%, 55%-62.5%, 23.4%-24.5%, 7.7%-8.2%, 19.5%-22.4%, and 31.65%-38.25% were obtained for these geotechnical parameters viz soil percentage passing 0.075 mm sieve size, liquid limit, plasticity index, linear shrinkage, natural moisture content, and plastic limit, respectively, resulting from the geotechnical analysis of the soil samples. The comparatively analyzed geophysical and geotechnical results revealed a high

IMIS: Integrated Marine Installation System for offshore turbines

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-07-01

The report describes a feasibility study on the Integrated Marine Installation System for offshore wind turbines. The aspects covered are (1) Background and why the study is required; (2) Aims and objectives of the project; (3) Summary of methods adopted; (4) Design criteria according to the area for deployment; (5) Conclusions and recommendations. The ultimate goal will be to install and secure the wind turbine in position using an integrated approach to avoid using lifting vessels. To date, an initial feasibility study has been carried out where four different concepts were considered. The next phase of the project will be to address a number of possible risks and constraints before the chosen concept can be demonstrated to be viable. The work is being carried out by Setech Ltd, Armstrong Technology Associates Ltd and Smith Rea Energy Ltd for the DTI.

Gun Carrying by High School Students in Boston, MA: Does Overestimation of Peer Gun Carrying Matter?

Science.gov (United States)

Hemenway, David; Vriniotis, Mary; Johnson, Renee M.; Miller, Matthew; Azrael, Deborah

2011-01-01

This paper investigates: (1) whether high school students overestimate gun carrying by their peers, and (2) whether those students who overestimate peer gun carrying are more likely to carry firearms. Data come from a randomly sampled survey conducted in 2008 of over 1700 high school students in Boston, MA. Over 5% of students reported carrying a…

Towards a strengthening of inspections carried out on pressurised equipment and pipework..

International Nuclear Information System (INIS)

Noel, St.

2010-01-01

Following the fast presidential election, a major restructuring of the administrative landscape was set in motion. Tasks that historically were the responsibility of the Ministry of Industry are now carried out by the Ministry of Sustainable Development, which in particular is responsible for the whole policy to do with the prevention of technological risks. The General Directorate for the Prevention of Risks (Direction generale de la prevention des risques (DGPR)) of this ministry is now responsible for controlling technological risks, opening up new perspectives in terms of managing accidental risks and offering a new opportunity for an 'integrated' approach, making it possible to deal with an industrial installation in all its facets. Within the DGPR, the Office for the Safety of Industrial Equipment (bureau de la securite des equipements industriels (BSEI)) is responsible for the safety of pressurised equipment, as well as pipes carrying gas, inflammable liquids and chemical products. After a quick presentation of the inspections carried out on this equipment, issues to do with their safety will be dealt with and in particular: - the suitability of inspections carried out in the tight of faults that are likely to occur and develop in the structures; - control of ageing; - management of the quality of new equipment. (author)

Integrative health coaching: an organizational case study.

Science.gov (United States)

Wolever, Ruth Q; Caldwell, Karen L; Wakefield, Jessica P; Little, Kerry J; Gresko, Jeanne; Shaw, Andrea; Duda, Linda V; Kosey, Julie M; Gaudet, Tracy

2011-01-01

The aim of this study was to describe integrative health (IH) coaching as developed in three different interventions offered through a major medical center, as a step toward further defining the field of health coaching. An organizational case study was conducted with document analysis and interviews. Interviewees were the first six IH coaches at Duke Integrative Medicine who provided 360 clients with individual and/or group coaching (two to 28 sessions) in a randomized clinical study and two work-site wellness programs. Qualitative analysis using the constant comparative method was conducted. Integrative health coaching is characterized by a process of self-discovery that informs goal setting and builds internal motivation by linking clients' goals to their values and sense of purpose. Time, commitment, and motivation are necessary in the IH coaching process. The underpinnings of IH coaching are distinct from the medical model, and the process is distinct from health education, executive coaching, and psychotherapy. Integrative health coaching fits well with the assumptions of integrative medicine and has a role in supporting behavior change. Copyright © 2011. Published by Elsevier Inc.

Customer Integration in Service Innovation: An Exploratory Study

Directory of Open Access Journals (Sweden)

Tim Straub

2013-09-01

Full Text Available Prominent industry projects, as well as an extensive literature suggest the importance of customer integration for companies’ innovation success. This appears to be especially true for service firms, which inherently build on customer interaction. Despite this appreciation of the approach, there are comparably few empirical analyses of the positive and negative effects of customer integration. In this exploratory study, we build on established customer role concepts to study the status quo of customer integration in industry, as well as reservations against the roles and negative experiences from customer integration projects. The study reveals a gap between reservations and actual negative experiences in losing know-how, as well as a positive effect of experience in customer integration on perceived benefits for the company.

Integrated regional assessment of global climatic change. Lessons from the Mackenzie Basin Impact Study (MBIS)

International Nuclear Information System (INIS)

Cohen, Stewart J.

1996-01-01

This paper outlines the potential role integrated regional assessments of global climatic change scenarios could play in building better links between science and related policy concerns. The concept is illustrated through description of an ongoing case study from Canada-the Mackenzie Basin Impact Study (MBIS). As part of the Government of Canada's Green Plan, the Global Warming Science Program includes a study of regional impacts of global warming scenarios in the Mackenzie Basin, located in northwestern Canada. The MBIS is a six-year program focussing on potential climate-induced changes in the land and water resource base, and the implications of four scenarios of global climatic change on land use and economic policies in this region. These policy issues include interjurisdictional water management, sustainability of native lifestyles, economic development opportunities (agriculture, forestry, tourism, etc.), sustainability of ecosystems and infrastructure maintenance. MBIS is due to be completed in 1997. MBIS represents an attempt to address regional impacts by incorporating a 'family of integrators' into the study framework, and by directly involving stakeholders in planning and research activities. The experience in organizing and carrying out this project may provide some lessons for others interested in organizing regional or country studies

Modelling of carrying capacity in National Park - Fruška Gora (Serbia case study

Directory of Open Access Journals (Sweden)

Vujko Aleksandra

2017-03-01

Full Text Available Negative effects of tourism development in a destination are usually the consequence of the high concentration of tourists, accommodation facilities and the activities that are practiced in a relatively restricted area. One of the most important measures to protect the areas is to calculate the maximum number of tourists that can simultaneously reside in a region, i.e. the determination of the carrying capacity. This paper outlines a method for determining carrying capacity based on zoning of environmental resources and zoning within a region. The paper argues for a return to the idea of identifying maximum appropriate number of users. The main hypothesis of the paper is based on the statement that the development of tourism in Fruška Gora (Mountain National Park in Northern Serbia must be in accordance with the basic principles of sustainability, including the determination of carrying capacity. The main research goal was to show the opinion of local residents about the uncontrolled development of tourism, and to determine the carrying capacity in four sports and recreational zones of the mountain. The carrying capacity of the area is calculated by Lavery and Stanev formulas.

Opportunities for Integrated Fast Ignition program

International Nuclear Information System (INIS)

Mackinnon, A. J.; Key, M. H.; Hatchett, S. P.; Tabak, M.; Town, R.; Gregori, G.; Patel, P. K.; Snavely, R.; Freeman, R. R.; Stephens, R. B.; Beg, F.

2005-01-01

Experiments designed to investigate the physics of particle transport and heating of dense plasmas have been carried out in an number of facilities around the world since the publication of the fast ignition concept in 1997. To date a number of integrated experiments, examining the capsule implosion and subsequent heating have been carried out on the Gekko facility at the Institute of Laser Engineering (ILE) Osaka, Japan. The coupling of energy by the short pulse into the pre-compressed core in these experiments was very encouraging. More facilities capable of carrying out integrated experiments are currently under construction: Firex at ILEm the Omega EP facility at the University of Rochester, Z PW at Sandia National Lab, LIL in France and eventually high energy PW beams on the NIF. This presentation will review the current status of experiments in this area and discuss the capabilities of integrated fast ignition research that will be required to design the proof of principle and scaling experiments for fast ignition to be carried on the NIF. (Author)

Integration of wind power in the Danish generation system. EC wind power penetration study, phase 2

Energy Technology Data Exchange (ETDEWEB)

NONE

1989-06-01

The Commission of the European Communities has asked utilities in the member countries to carry out a coordinated study of the wind energy potential. The main objective is to show the consequences for the future electricity system when integrating wind power production covering 5, 10 or 15% of total demand. In addition to the best estimate scenario believed to be operational, some additional calculations have been carried out: wind power production as a negative load only (not operational for the total system); different levels of investment in wind farms. The methodology is based on the following steps: define a reference scenario for year 2000; define an alternative scenario with a certain amount of wind power production; calculate time-series for electrical load and district heating from combined heat/power production; calculate time-series for wind power production; make economic evaluation and sensitivity analysis; show environmental differences. Incorporation of wind power into the ELSAM power system, with the wind energy meeting, about 5% of demand will give rise to additional control capacity, or call for new contracts with neighbouring countries. The study includes estimated network investments. The simulations have been made with the SIM and SLUMP computer programmes. The economic analyses and the sensitivity analyses have been carried out using spreadsheets. The conclusion concerning profitability - based on the best estimate assumptions - is that the studied wind power scenarios are unprofitable. (EG)

Brasov people’s fears after EU accession. Study carried out at the level of Brasov Municipality

Directory of Open Access Journals (Sweden)

Claudiu COMAN

2012-01-01

Full Text Available This study is part of a wider research, a compared type based sociological survey using the questionnaire, applied in Brasov during January 2010 and June 2010: "Effects of the EU integration perceived at the level of Brasov community and its implications on life quality and styles." By trying to explain precisely these effects of European integration (as research objective it was found that, in the scientific literature, the subject of the EU integration effort was oriented by means of the utilitarian theory (Gabel, 1998. Other international studies have also put in evidence that public opinion on EU integration matters, is determined by economic considerations and personal calculations such as cost-benefit (Anderson, 1995; Eichenberg and Dalton, 1993; Gabel, 1998. Using secondary analysis of the 2010 database and by following the proposed model of Ioan Mărginean, Iuliana PrecupeŃu and Ana Maria Preoteasa (2004 regarding the development of a measurement model of the post-accession EU fears, adapted to the Brasov realities and based on three dimensions (the sphere of private life, the sphere of social life and the relationship between the individual and the society, the statistical analysis provides new clues upon the types, the categories and the attitudinal fears profiles found in Brasov and their correlation with a new global factor - the economic crisis.

Life sciences payload definition and integration study, task C and D. Volume 2: Payload definition, integration, and planning studies

Science.gov (United States)

1973-01-01

The Life Sciences Payload Definition and Integration Study was composed of four major tasks. Tasks A and B, the laboratory definition phase, were the subject of prior NASA study. The laboratory definition phase included the establishment of research functions, equipment definitions, and conceptual baseline laboratory designs. These baseline laboratories were designated as Maxi-Nom, Mini-30, and Mini-7. The outputs of Tasks A and B were used by the NASA Life Sciences Payload Integration Team to establish guidelines for Tasks C and D, the laboratory integration phase of the study. A brief review of Tasks A and B is presented provide background continuity. The tasks C and D effort is the subject of this report. The Task C effort stressed the integration of the NASA selected laboratory designs with the shuttle sortie module. The Task D effort updated and developed costs that could be used by NASA for preliminary program planning.

Diagnosis about Integration process of youth foreign Catalan

Directory of Open Access Journals (Sweden)

Marta Sabariego Puig

2015-09-01

Full Text Available This paper presents the results of a diagnostic study on the real integration process of young migrants in Catalonia. The study was carried out using a descriptive survey of 3,830 young Catalans from varying cultural backgrounds aged between 14 and 18, with the aim of identifying the key factors influencing the integration of Catalan migrant youth. Also, in order to analyze these key elements in greater depth as factors easing and/or obstructing integration, four discussion groups were held with the same young people. Results reveal achievements and challenges for further study, useful for the design of social and educational policies which may promote the integration process, understood in its structural, social, cognitive-cultural and identitary dimensions. Our study confirms the need for a society with pluralistic beliefs, principles and actions, which should be reflected in democratic systems and social and educational policies based on the concept of integration as reciprocity.

[Ecological carrying capacity and Chongming Island's ecological construction].

Science.gov (United States)

Wang, Kaiyun; Zou, Chunjing; Kong, Zhenghong; Wang, Tianhou; Chen, Xiaoyong

2005-12-01

This paper overviewed the goals of Chongming Island's ecological construction and its background, analyzed the current eco-economic status and constraints of the Island, and put forward some scientific issues on its ecological construction. It was suggested that for the resources-saving and sustainable development of the Island, the researches on its ecological construction should be based on its ecological carrying capacity, fully take the regional characteristics into consideration, and refer the successful development modes at home and abroad. The carrying capacity study should ground on systemic and dynamic views, give a thorough evaluation of the Island's present carrying capacity, simulate its possible changes, and forecast its demands and risks. Operable countermeasures to promote the Island's carrying capacity should be worked out, new industry structure, population scale, and optimized distribution projects conforming to regional carrying capacity should be formulated, and effective ecological security alarming and control system should be built, with the aim of providing suggestions and strategic evidences for the decision-making of economic development and sustainable environmental resources use of the region.

Organization and carrying out the triathlon competitions in Ukraine

Directory of Open Access Journals (Sweden)

Volodymyr Vodlozerov

2016-02-01

Full Text Available Purpose: the aim is analyzing of system of organization and carrying out the triathlon competitions in Ukraine in accordance with rules of triathlon international federation. Material & Methods: comparative analysis of process of organization and carrying out the triathlon competitions in the world and Ukraine was carried out on basis of specialist literature studying, normative base of sports organizations (triathlon federation. Results: inconsistencies were identified in competitions carried out in cold season, particularity of triathlon that intends overcoming the combined distance without time durations between stages. Conclusions: recommendation in eliminate inconsistencies that affect to performance of triathlon competitions in Ukraine was suggested.

Revisiting the carry-over effects of advertising in franchise industries

OpenAIRE

Park, Kwangmin; Jang, SooCheong (Shawn)

2016-01-01

Despite prior studies, little has been done to understand the advertising carry-over effect. The purpose of this study is to investigate the heterogeneous attributes of the carry-over effect by focusing on the differences between the franchise and the non-franchise firms. pp.785-800

Penalized differential pathway analysis of integrative oncogenomics studies

NARCIS (Netherlands)

van Wieringen, W.N.; van de Wiel, M.A.

2014-01-01

Through integration of genomic data from multiple sources, we may obtain a more accurate and complete picture of the molecular mechanisms underlying tumorigenesis. We discuss the integration of DNA copy number and mRNA gene expression data from an observational integrative genomics study involving

Cost optimization of load carrying thin-walled precast high performance concrete sandwich panels

DEFF Research Database (Denmark)

Hodicky, Kamil; Hansen, Sanne; Hulin, Thomas

2015-01-01

and HPCSP’s geometrical parameters as well as on material cost function in the HPCSP design. Cost functions are presented for High Performance Concrete (HPC), insulation layer, reinforcement and include labour-related costs. The present study reports the economic data corresponding to specific manufacturing......The paper describes a procedure to find the structurally and thermally efficient design of load-carrying thin-walled precast High Performance Concrete Sandwich Panels (HPCSP) with an optimal economical solution. A systematic optimization approach is based on the selection of material’s performances....... The solution of the optimization problem is performed in the computer package software Matlab® with SQPlab package and integrates the processes of HPCSP design, quantity take-off and cost estimation. The proposed optimization process outcomes in complex HPCSP design proposals to achieve minimum cost of HPCSP....

Thermal-hydraulic study of integrated steam generator in PWR

International Nuclear Information System (INIS)

Osakabe, Masahiro

1989-01-01

One of the safety aspects of innovative reactor concepts is the integration of steam generators (SGs) into the reactor vessel in the case of the pressurized water reactor (PWR). All of the reactor system components including the pressurizer are within the reactor vessel in the SG integrated PWR. The simple heat transfer code was developed for the parametric study of the integrated SG. The code was compared to the once-through 19-tube SG experiment and the good agreement between the experimental results and the code predictions was obtained. The assessed code was used for the parametric study of the integrated once-through 16 m-straight-tube SG installed in the annular downcomer. The proposed integrated SG as a first attempt has approximately the same tube size and pitch as the present PWR and the SG primary and secondary sides in the present PWR is inverted in the integrated PWR. Based on the study, the reactor vessel size of the SG integrated PWR was calculated. (author)

Integrated Agent-Based and Production Cost Modeling Framework for Renewable Energy Studies: Preprint

Energy Technology Data Exchange (ETDEWEB)

Gallo, Giulia

2015-10-07

The agent-based framework for renewable energy studies (ARES) is an integrated approach that adds an agent-based model of industry actors to PLEXOS and combines the strengths of the two to overcome their individual shortcomings. It can examine existing and novel wholesale electricity markets under high penetrations of renewables. ARES is demonstrated by studying how increasing levels of wind will impact the operations and the exercise of market power of generation companies that exploit an economic withholding strategy. The analysis is carried out on a test system that represents the Electric Reliability Council of Texas energy-only market in the year 2020. The results more realistically reproduce the operations of an energy market under different and increasing penetrations of wind, and ARES can be extended to address pressing issues in current and future wholesale electricity markets.

Use of surface electromyography in phonation studies: an integrative review

Science.gov (United States)

Balata, Patricia Maria Mendes; Silva, Hilton Justino da; Moraes, Kyvia Juliana Rocha de; Pernambuco, Leandro de Araújo; Moraes, Sílvia Regina Arruda de

2013-01-01

Summary Introduction: Surface electromyography has been used to assess the extrinsic laryngeal muscles during chewing and swallowing, but there have been few studies assessing these muscles during phonation. Objective: To investigate the current state of knowledge regarding the use of surface electromyography for evaluation of the electrical activity of the extrinsic muscles of the larynx during phonation by means of an integrative review. Method: We searched for articles and other papers in the PubMed, Medline/Bireme, and Scielo databases that were published between 1980 and 2012, by using the following descriptors: surface electromyography and voice, surface electromyography and phonation, and surface electromyography and dysphonia. The articles were selectedon the basis ofinclusion and exclusion criteria. Data Synthesis: This was carried out with a cross critical matrix. We selected 27 papers,i.e., 24 articles and 3 theses. The studies differed methodologically with regards to sample size and investigation techniques, making it difficult to compare them, but showed differences in electrical activity between the studied groups (dysphonicsubjects, non-dysphonicsubjects, singers, and others). Conclusion: Electromyography has clinical applicability when technical precautions with respect to application and analysis are obeyed. However, it is necessary to adopt a universal system of assessment tasks and related measurement techniques to allow comparisons between studies. PMID:25992030

Use of surface electromyography in phonation studies: an integrative review

Directory of Open Access Journals (Sweden)

Balata, Patricia Maria Mendes

2014-01-01

Full Text Available Introduction: Surface electromyography has been used to assess the extrinsic laryngeal muscles during chewing and swallowing, but there have been few studies assessing these muscles during phonation. Objective: To investigate the current state of knowledge regarding the use of surface electromyography for evaluation of the electrical activity of the extrinsic muscles of the larynx during phonation by means of an integrative review. Method: We searched for articles and other papers in the PubMed, Medline/Bireme, and Scielo databases that were published between 1980 and 2012, by using the following descriptors: surface electromyography and voice, surface electromyography and phonation, and surface electromyography and dysphonia. The articles were selectedon the basis ofinclusion and exclusion criteria. Data Synthesis: This was carried out with a cross critical matrix. We selected 27 papers,i.e., 24 articles and 3 theses. The studies differed methodologically with regards to sample size and investigation techniques, making it difficult to compare them, but showed differences in electrical activity between the studied groups (dysphonicsubjects, non-dysphonicsubjects, singers, and others. Conclusion: Electromyography has clinical applicability when technical precautions with respect to application and analysis are obeyed. However, it is necessary to adopt a universal system of assessment tasks and related measurement techniques to allow comparisons between studies.

Systems integration.

Science.gov (United States)

Siemieniuch, C E; Sinclair, M A

2006-01-01

The paper presents a view of systems integration, from an ergonomics/human factors perspective, emphasising the process of systems integration as is carried out by humans. The first section discusses some of the fundamental issues in systems integration, such as the significance of systems boundaries, systems lifecycle and systems entropy, issues arising from complexity, the implications of systems immortality, and so on. The next section outlines various generic processes for executing systems integration, to act as guides for practitioners. These address both the design of the system to be integrated and the preparation of the wider system in which the integration will occur. Then the next section outlines some of the human-specific issues that would need to be addressed in such processes; for example, indeterminacy and incompleteness, the prediction of human reliability, workload issues, extended situation awareness, and knowledge lifecycle management. For all of these, suggestions and further readings are proposed. Finally, the conclusions section reiterates in condensed form the major issues arising from the above.

Carrying capacity: the tradition and policy implications of limits

Directory of Open Access Journals (Sweden)

Virginia Deane Abernethy

2001-01-01

Full Text Available ABSTRACT: Within just the last few centuries, science and technology have enlarged human capabilities and population size until humans now take, for their own use, nearly half of the Earth's net terrestrial primary production. An ethical perspective suggests that potentials to alter, or further increase, humanity's use of global resources should be scrutinized through the lenses of self-interested foresightedness and respect for non-human life. Without overtly invoking ethics, studies of the carrying capacity achieve just this objective. Carrying capacity is an ecological concept that expresses the relationship between a population and the natural environment on which it depends for ongoing sustenance. Carrying capacity assumes limits on the number of individuals that can be supported at a given level of consumption without degrading the environment and, therefore, reducing future carrying capacity. That is, carrying capacity addresses long-term sustainability. Worldviews differ in the importance accorded to the carrying capacity concept. This paper addresses three worldviews - ecological, romantic, and entrepreneurial - and explores the ethics and the policy implications of their contrasting perspectives.

Integral comparison of library performance

International Nuclear Information System (INIS)

Mori, Takamasa

2006-01-01

The 2003-2004 activities of Reactor Integral Test WG under Subcommittee on Reactor Constants of Japanese Nuclear Data Committee are presented. During this period, the WG carried out integral tests of JENDL-3.3, ENDF/B-VI and JEF 2.2 (JEFF-3.0) for reactor applications. Some results of integral tests for other latest libraries, JEFF-3.1 and ENDF/B-VII are also presented. (author)

Effect of Gun Carrying on Perceptions of Risk Among Adolescent Offenders.

Science.gov (United States)

Loughran, Thomas A; Reid, Joan A; Collins, Megan Eileen; Mulvey, Edward P

2016-02-01

We observed how perceptions of risks, costs, crime rewards, and violence exposure change as individual gun-carrying behavior changes among high-risk adolescents. We analyzed a longitudinal study (2000-2010) of serious juvenile offenders in Maricopa County, Arizona, or Philadelphia County, Pennsylvania, assessing within-person changes in risk and reward perceptions, and violence exposure as individuals initiated or ceased gun carrying. Despite being associated with heightened exposure to violence, gun carrying was linked to lower perceptions of risks and costs and higher perceived rewards of offending. Gun carrying was not time-stable, as certain individuals both started and stopped carrying during the study. Within-person changes in carrying guns were associated with shifting perceptions of risks, costs, and rewards of crime, and changes in exposure to violence in expected directions. Gun carrying reduces perceptions of risks associated with offending while increasing actual risk of violence exposure. This suggests that there is an important disconnect between perceptions and objective levels of safety among high-risk youths. Gun-carrying decisions may not only be influenced by factors of protection and self-defense, but also by perceptions of risks and reward associated with engaging in crime more generally.

Attitude towards New Packaging to Reduce Condom-carrying Embarrassment among Thai Youth, A Cross-sectional Study

OpenAIRE

Apinut Wongkietkachorn; Kunathip Nissaipan; Narin Hiransuthikul

2014-01-01

Background: Human Immunodeficiency Virus (HIV) incidence has been increasing in Thai youth, mostly from unsafe sex. Embarrassment with carrying condom was one of the main reasons. This study aims to evaluate attitude towards condom use, sexual behavior and the new condom packaging that merges with daily life products in Thai youth. Methods: A cross-sectional study was conducted among volunteers aged 15-24. New packaging were demonstrated and the volunteers were provided with questionnaire...

A comparative study of integrated pest management strategies based on impulsive control.

Science.gov (United States)

Páez Chávez, Joseph; Jungmann, Dirk; Siegmund, Stefan

2018-12-01

The paper presents a comprehensive numerical study of mathematical models used to describe complex biological systems in the framework of integrated pest management. Our study considers two specific ecosystems that describe the application of control mechanisms based on pesticides and natural enemies, implemented in an impulsive and periodic manner, due to which the considered models belong to the class of impulsive differential equations. The present work proposes a numerical approach to study such type of models in detail, via the application of path-following (continuation) techniques for nonsmooth dynamical systems, via the novel continuation platform COCO (Dankowicz and Schilder). In this way, a detailed study focusing on the influence of selected system parameters on the effectiveness of the pest control scheme is carried out for both ecological scenarios. Furthermore, a comparative study is presented, with special emphasis on the mechanisms upon which a pest outbreak can occur in the considered ecosystems. Our study reveals that such outbreaks are determined by the presence of a branching point found during the continuation analysis. The numerical investigation concludes with an in-depth study of the state-dependent pesticide mortality considered in one of the ecological scenarios.

Demand Response and Energy Storage Integration Study

Energy Technology Data Exchange (ETDEWEB)

Ma, Ookie; Cheung, Kerry; Olsen, Daniel J.; Matson, Nance; Sohn, Michael D.; Rose, Cody M.; Dudley, Junqiao Han; Goli, Sasank; Kiliccote, Sila; Cappers, Peter; MacDonald, Jason; Denholm, Paul; Hummon, Marissa; Jorgenson, Jennie; Palchak, David; Starke, Michael; Alkadi, Nasr; Bhatnagar, Dhruv; Currier, Aileen; Hernandez, Jaci; Kirby, Brendan; O' Malley, Mark

2016-03-01

Demand response and energy storage resources present potentially important sources of bulk power system services that can aid in integrating variable renewable generation. While renewable integration studies have evaluated many of the challenges associated with deploying large amounts of variable wind and solar generation technologies, integration analyses have not yet fully incorporated demand response and energy storage resources. This report represents an initial effort in analyzing the potential integration value of demand response and energy storage, focusing on the western United States. It evaluates two major aspects of increased deployment of demand response and energy storage: (1) Their operational value in providing bulk power system services and (2) Market and regulatory issues, including potential barriers to deployment.

CASE STUDIES IN INTEGRATIVE PSYCHOTHERAPY PART 2 (EDITORIAL

Directory of Open Access Journals (Sweden)

Gregor Žvelc

2013-05-01

Full Text Available Announcement of the special issue of the International Journal of Integrative Psychotherapy, which is dedicated to the exploration and discussion of an integrative psychotherapy case study.

Experimental measurements and integrated modelling studies of actinide sorption onto cement

International Nuclear Information System (INIS)

Sugiyama, Daisuke; Fujita, Tomonari; Baston, G.M.N.

2003-01-01

An Integrated Cement Sorption Model (ICSM) for actinides onto Ordinary Portland Cement (OPC) is developed. The experimental measurements using the batch sorption technique for actinides onto cement and constituent minerals, which were considered in the modelling calculations, are also described. The actinide elements studied (thorium, uranium, neptunium, plutonium and americium) were strongly sorbed onto OPC. An initial comparison of the experimental data relating the sorption values of actinides onto cement-component phases with those onto OPC is carried out. The results suggest that the Calcium Silicate Hydrate (C-S-H) phases were found to be the most likely candidates to be the dominant-sorbing phases in order to describe the sorption of a actinides onto OPC. An approach to develop the integrated cement sorption model, based on a thermodynamic surface complexation model, is described with discussions on the possible mineralogy and phase distribution of OPC. Another approach than sorption, assuming that co-precipitation on the surface of the cement phase dominates 'sorption', is proposed and discussed. A scoring system is introduced to assess the applicability of the proposed ICSMs. It is suggested that the thermodynamic sorption model is recommended for the sorption of ionic species and the surface co-precipitation model is recommended for the sorption of neutral species though the sorption model is still recommended to be used to model OPC-based systems. (author)

Evaluating total carrying capacity of tourism using impact indicators

Directory of Open Access Journals (Sweden)

R. Sharma

2016-03-01

Full Text Available The carrying capacity is well identified tool to manage problems due to uncontrolled tourism for any destination. This report highlights the carrying capacity estimation of Kerwa tourism area, Bhopal, India. The methodology used in this report is a new two-tier mechanism of impact analysis using index numbers derived from a survey of 123 stakeholders. From this the individual component impact analysis and the total carrying capacity of the area is computed in order to state the insight of the total carrying capacity left for the tourism activities in Kerwa tourism area. It is calculated from, the results so obtained, that the Kerwa catchment area falls in “very low impact category” and hence in a healthy state of the artwork in terms of total carrying capacity. The study conveys the current need in the destination management and tourism development as a road map for the destination managers for implementing sustainable tourism.

INTEGRATED BUSINESS STRATEGY AND ITS CONSTRUCTS: PILOT STUDY AT HOTELS IN MALAYSIA

OpenAIRE

Shahrin Saad; Khulida Kirana Yahya; Faizuniah Pangil

2012-01-01

Since hotel industry is major contributor to the growth of Tourism Industry in Malaysia, it is vital to take into consideration of issues that are being carried by the industry. For example the high turnover of employee in hotel due to poor strategy conducted by hotels’ management. This paper explores the new strategy measurement which is the integrated business strategy dimensions in fitting the hotel industry due to the scarce of hospitality strategy at present. The new strategy is develope...

Modification Of Carry-Blair Transport Media For Storage Salmonella typhi

Directory of Open Access Journals (Sweden)

Yati Supriatin

2016-09-01

Full Text Available The aim of this study was to determine transport media modification as alternative media to replace Carry Blair. One type of transport media that often use to carry faeces specimens suspected to contain Salmonella typhi is Carry-Blair media. Studies have been conducted experimentally by storing Salmonella typhi on alternative transport media with Peptone composition, disodium Phosphate, Sodium chloride, Calcium chloride, which is made using a semi-solid and Carry-Blair as a control. Three variety of storage was done (0 hour,6 hours,9 hours at a temperature 4⁰-8⁰C and then Salmonella typhi was inoculated in Salmonella Shigella Agar using spread plate technique incubated during 24 hours at 37⁰C, counted the number of colonies by the plate count method using the colony counter. The results of ANOVA could be concluded that modification media could be use as alternative media replace Carry-Blair at 6 hours. Based on regression correlation test was assumed that the Salmonella typhi bacteria still life at less than 11 hours 54 minutes.

Carry-Over Effects on the Annual Cycle of a Migratory Seabird: an Experimental Study

OpenAIRE

Fayet, Annette; Freeman, R; Shoji, A; Kirk, HL; Padget, O; Perrins, CM; Guilford, T

2016-01-01

1. Long-lived migratory animals must balance the cost of current reproduction with their own condition ahead of a challenging migration and future reproduction. In these species, carry-over effects, which occur when events in one season affect the outcome of the subsequent season, may be particularly exacerbated. However, how carry-over effects influence future breeding outcomes and whether (and how) they also affect behaviour during migration and wintering is unclear. 2. Here we inve...

Domestic water carrying and its implications for health: a review and mixed methods pilot study in Limpopo Province, South Africa

Directory of Open Access Journals (Sweden)

Geere Jo-Anne L

2010-08-01

Full Text Available Abstract Background Lack of access to safe water remains a significant risk factor for poor health in developing countries. There has been little research into the health effects of frequently carrying containers of water. The aims of this study were to better understand how domestic water carrying is performed, identify potential health risk factors and gain insight into the possible health effects of the task. Methods Mixed methods of data collection from six were used to explore water carrying performed by people in six rural villages of Limpopo Province, South Africa. Data was collected through semi-structured interviews and through observation and measurement. Linear regression modelling were used to identify significant correlations between potential risk factors and rating of perceived exertion (RPE or self reported pain. Independent t-tests were used to compare the mean values of potential risk factors and RPE between sub-groups reporting pain and those not reporting pain. Results Water carrying was mainly performed by women or children carrying containers on their head (mean container weight 19.5 kg over a mean distance of 337 m. The prevalence of spinal (neck or back pain was 69% and back pain was 38%. Of participants who carried water by head loading, the distance walked by those who reported spinal pain was significantly less than those who did not (173 m 95%CI 2-343; p = 0.048. For head loaders reporting head or neck pain compared to those who did not, the differences in weight of water carried (4.6 kg 95%CI -9.7-0.5; p = 0.069 and RPE (2.5 95%CI -5.1-0.1; p = 0.051 were borderline statistically significant. For head loaders, RPE was significantly correlated with container weight (r = 0.52; p = 0.011 and incline (r = 0.459; p = 0.018 Conclusions Typical water carrying methods impose physical loading with potential to produce musculoskeletal disorders and related disability. This exploratory study is limited by a small sample size

Building integrated care systems: a case study of Bidasoa Integrated Health Organisation

Directory of Open Access Journals (Sweden)

Nuria Toro Polanco

2015-06-01

Full Text Available Introduction: This paper analyses the implementation of integrated care policies in the Basque Country through the deployment of an Integrated Health Organisation in Bidasoa area during the period 2011–2014. Structural, functional and clinical integration policies have been employed with the aim to deliver integrated and person-centred care for patients, especially for those living with chronic conditions.Methods: This organisational case study used multiple data sources and methods in a pragmatic and reflexive manner to build a picture of the organisational development over a 4-year period. In order to measure the progress of integration three concepts have been measured: (i readiness for chronicity measured with Assessment of Readiness for Chronicity in Healthcare Organisations tool; (ii collaboration between clinicians from different care levels measured with the D'Amour Questionnaire, and (iii overall impact of integration through several indicators based on the Triple Aim Framework.Results: The measurement of organisational readiness for chronicity showed improvements in five of the six areas under evaluation. Similarly the collaboration between professionals of different care levels showed a steady improvement in each of the 10 items. Furthermore, the Triple Aim-based indicators showed a better experience of care in terms of patients’ perceptions of care coordination; a reduction in hospital utilisation, particularly for patients with complex chronic conditions; and cost-containment in terms of per capita expenditure.Conclusion: There is a significant amount of data that shows that Bidasoa Integrated Health Organisation has progressed in terms of delivering integrated care for chronic conditions with a positive impact on several Triple Aim outcomes.

Building integrated care systems: a case study of Bidasoa Integrated Health Organisation

Directory of Open Access Journals (Sweden)

Nuria Toro Polanco

2015-06-01

Full Text Available Introduction: This paper analyses the implementation of integrated care policies in the Basque Country through the deployment of an Integrated Health Organisation in Bidasoa area during the period 2011–2014. Structural, functional and clinical integration policies have been employed with the aim to deliver integrated and person-centred care for patients, especially for those living with chronic conditions. Methods: This organisational case study used multiple data sources and methods in a pragmatic and reflexive manner to build a picture of the organisational development over a 4-year period. In order to measure the progress of integration three concepts have been measured: (i readiness for chronicity measured with Assessment of Readiness for Chronicity in Healthcare Organisations tool; (ii collaboration between clinicians from different care levels measured with the D'Amour Questionnaire, and (iii overall impact of integration through several indicators based on the Triple Aim Framework. Results: The measurement of organisational readiness for chronicity showed improvements in five of the six areas under evaluation. Similarly the collaboration between professionals of different care levels showed a steady improvement in each of the 10 items. Furthermore, the Triple Aim-based indicators showed a better experience of care in terms of patients’ perceptions of care coordination; a reduction in hospital utilisation, particularly for patients with complex chronic conditions; and cost-containment in terms of per capita expenditure. Conclusion: There is a significant amount of data that shows that Bidasoa Integrated Health Organisation has progressed in terms of delivering integrated care for chronic conditions with a positive impact on several Triple Aim outcomes.

The SUSTAIN Project: A European Study on Improving Integrated Care for Older People Living at Home

Science.gov (United States)

Stoop, Annerieke; Billings, Jenny; Leichsenring, Kai; Ruppe, Georg; Tram, Nhu; Barbaglia, María Gabriela; Ambugo, Eliva A.; Zonneveld, Nick; Paat-Ahi, Gerli; Hoffmann, Henrik; Khan, Usman; Stein, Viktoria; Wistow, Gerald; Lette, Manon; Jansen, Aaltje P.D.; Nijpels, Giel; Baan, Caroline A.

2018-01-01

Introduction: Integrated care programmes are increasingly being put in place to provide care to older people who live at home. Knowledge of how to further develop integrated care and how to transfer successful initiatives to other contexts is still limited. Therefore, a cross-European research project, called Sustainable Tailored Integrated Care for Older People in Europe (SUSTAIN), has been initiated with a twofold objective: 1. to collaborate with local stakeholders to support and monitor improvements to established integrated care initiatives for older people with multiple health and social care needs. Improvements focus on person-centredness, prevention orientation, safety and efficiency; 2. to make these improvements applicable and adaptable to other health and social care systems, and regions in Europe. This paper presents the overall structure and approach of the SUSTAIN project. Methods: SUSTAIN uses a multiple embedded case study design. In three phases, SUSTAIN partners: (i) conduct interviews and workshops with stakeholders from fourteen established integrated care initiatives to understand where they would prefer improvements to existing ways of working; (ii) collaborate with local stakeholders to support the design and implementation of improvement plans, evaluate implementation progress and outcomes per initiative, and carry out overarching analyses to compare the different initiatives, and; (iii) translate knowledge and experience to an online roadmap. Discussion: SUSTAIN aims to generate evidence on how to improve integrated care, and apply and transfer the knowledge gained to other health and social care systems, and regions. Lessons learned will be brought together in practical tools to inform and support policy-makers and decision-makers, as well as other stakeholders involved in integrated care, to manage and improve care for older people living at home. PMID:29632456

A Needs Analysis for Technology Integration Plan: Challenges and Needs of Teachers

Science.gov (United States)

Vatanartiran, Sinem; Karadeniz, Sirin

2015-01-01

Lack of technology leadership and technology integration plans are important obstacles for using technology effectively in schools. We carried out a large-scale study to be able to design a technology integration plan for one of the pilot provinces that Fatih Project was initiated. The purpose of this research is to examine the perceived…

[A study concerning how much weight schoolchildren carry in their bags, involving four schools in the metropolitan area of Buenos Aires, Argentina].

Science.gov (United States)

Laíño, Fernando A; Santa María, Claudio J; Bazán, Nelio E; Mainero, Daniel D

2013-01-01

Determining the weight children carry in their bags to school (absolute and relative values) and the distance walked during home-school routes, involving students from four schools in the metropolitan area of Buenos Aires. The study involved 751 primary (4th to 6th grades) and secondary (1st to 3rd years) level students who were attending three private schools and one public one. Body and bag weights were measured and the children were asked about the distance (in blocks) they walked from school to home. The study involved a descriptive analysis and contrasted the students by gender, educational level, type of school and grade or year. Possible associations between variables were ascertained. The group was divided into those carrying bags weighing less than 10% of their body weight and those who carrying 10% (considered a critical value) and more; frequencies were calculated by the type of bag being used. 68% of the sample were carrying 10% or more of their body weight (P42=10.13%): 66% in male (P44=10.12%) and 60% in female children (P40=10.2%). Private school students carried more weight than public school children (p<0.05) and younger students carried a greater weight than older students (p<0.05) in both educational levels. Most children were carrying relative weights well above that recommended and female students were most affected. Younger students carried higher absolute and relative weights.

A study on development of Pyro process integrated inactive demonstration facility

International Nuclear Information System (INIS)

Cho, I.; Lee, E.; Choung, W.; You, G.; Kim, H.

2010-10-01

Since 2007, the Pride (Pyro process integrated inactive demonstration facility) has been developed to demonstrate the integrated engineering-scale pyro processing using natural uranium with surrogate materials. In this paper, safety evaluation on hypothetical accident case is carried out to ensure the release of radioactivity being negligible to the environment and the performance of indoor argon flow for the argon cell has been investigated by means of CFD analysis. The worst accident case, even in the firing of the all uranium metal in argon cell, cause dose rate are negligible comparing to 0.25 Sv of effective dose rate to whole body or 3 Sv of equivalent dose rate to the thyroid preliminary CFD analyses show the temperature and velocity distribution of argon cell, and give the information to change the argon exchange rate and displace the argon supply or exhaust duct. CFD will allow design change and improvements in ventilation systems at lower cost. (Author)

Assessment of feeding value of vegetable-carried pineapple fruit ...

African Journals Online (AJOL)

This study compared the sun-drying characteristics of five blends each (w/w; 1:1, 1:1.5, 1:2, 1:2.5, 1:3) of wheat offal-carried pineapple waste (WO:PW) and brewers' dried grains-carried pineapple waste (BDG:PW), assessed the blends for their nutrient contents and the feeding value of the optimum blends with Red Sokoto ...

Effects of carrying a pregnancy and of method of delivery on urinary incontinence: a prospective cohort study

OpenAIRE

Eason, Erica; Labrecque, Michel; Marcoux, Sylvie; Mondor, Myrto

2004-01-01

Abstract Background This study was carried out to identify risk factors associated with urinary incontinence in women three months after giving birth. Methods Urinary incontinence before and during pregnancy was assessed at study enrolment early in the third trimester. Incontinence was re-assessed three months postpartum. Logistic regression analysis was used to assess the role of maternal and obstetric factors in causing postpartum urinary incontinence. This prospective cohort study in 949 p...

Integrated installation for offshore wind turbines

Energy Technology Data Exchange (ETDEWEB)

Way, J.; Bowerman, H.

2003-07-01

A project to investigate the feasibility of integrating the offshore installation of foundation, turbine and tower for offshore wind turbines into one operation is described. Three separate objectives are listed. They are: (1) Telescopic tower study - reversible process incorporating lift and lock mechanisms; (2) Transportation study - technical and economic feasibility of transporting and installing a wind turbine unit via a standard barge with minimal conversion and (3) Self-burial system study - to demonstrate the feasibility of self burial of a slab foundation via controlled jetting beneath the slab. The background to the study and the proposed concepts are discussed. The work carried out to date and the costs are reported together with the findings. Recommendations for future work are listed. The work was carried out by Corus UK Ltd and is managed by Future Energy Solutions for the DTI.

Franchising as an Integrated Form of Business Organization

Directory of Open Access Journals (Sweden)

Goncharenko Margaryta L.

2018-03-01

Full Text Available The article is aimed at substantiating the possibilities of using franchising for effective integration of enterprises in the market economy. A study on the essence of franchising relations with consideration of their historical formation and the current legal representation was carried out. Features of such relationships for franchisor and franchisees in the form of two business models of franchising together with different types of payments for franchise have been provided. It has been identified that franchising allows for integrative relations, which are established between the representatives of big and small business over a certain period of time, forming for each party some positive and negative moments of interaction. It is proposed to carry out an analysis of economic problems leading to delays in the formation of franchising schemes at both the State and regional levels.

Integrative practices in hospitals and their impact on patient flow

NARCIS (Netherlands)

Drupsteen, J.; van der Vaart, T.; van Donk, D.P.

2013-01-01

Purpose - The aim of this paper is to investigate which integrative planning and control practices are used in hospitals and what their effects are on patient flow. Design/methodology/approach - The study is based on a three-hospital multi-case study carried out in The Netherlands. The main findings

The observation of biology implemented by integrated religion values in integrated Islamic school (Decriptive Study in X Integrated Senior Hight School Tasikmalaya)

Science.gov (United States)

Nurjanah, E.; Adisendjaja, Y. H.; Kusumastuti, M. N.

2018-05-01

The learning Integrated Religious value is one of the efforts to increase the motivation of learning and building the student character. This study aims to describe the application of Biology learning integrated religion values in Integrated Islamic School. Research methods used in this research is descriptive. Participants in this study involved the headmaster, headmaster of curriculum, biology teachers, boarding school teachers, the lead of boarding schools, and students. The instruments used are interview, observation and the student questionnaire about learning biology. The results showed that learning in X school consists of two curriculums, there was the curriculum of national education and curriculum of boarding school. The curriculum of national education referred to 2013 curriculum and boarding school curriculum referred to the curriculum of Salafi boarding school (Kitab Kuning). However, in its learning process not delivered integrated. The main obstacle to implementing the learning integrated religious values are 1) the background of general teacher education did not know of any connection between biology subject and subject that are studied in boarding school; 2) schools did not form the teaching team; 3) unavailability of materials integrated religious values.

Developing engineering processes through integrated modelling of product and process

DEFF Research Database (Denmark)

Nielsen, Jeppe Bjerrum; Hvam, Lars

2012-01-01

This article aims at developing an operational tool for integrated modelling of product assortments and engineering processes in companies making customer specific products. Integrating a product model in the design of engineering processes will provide a deeper understanding of the engineering...... activities as well as insight into how product features affect the engineering processes. The article suggests possible ways of integrating models of products with models of engineering processes. The models have been tested and further developed in an action research study carried out in collaboration...... with a major international engineering company....

Design of a hybrid biomaterial for tissue engineering: Biopolymer-scaffold integrated with an autologous hydrogel carrying mesenchymal stem-cells.

Science.gov (United States)

Weinstein-Oppenheimer, Caroline R; Brown, Donald I; Coloma, Rodrigo; Morales, Patricio; Reyna-Jeldes, Mauricio; Díaz, María J; Sánchez, Elizabeth; Acevedo, Cristian A

2017-10-01

Biologically active biomaterials as biopolymers and hydrogels have been used in medical applications providing favorable results in tissue engineering. In this research, a wound dressing device was designed by integration of an autologous clot hydrogel carrying mesenchymal stem-cells onto a biopolymeric scaffold. This hybrid biomaterial was tested in-vitro and in-vivo, and used in a human clinical case. The biopolymeric scaffold was made with gelatin, chitosan and hyaluronic acid, using a freeze-drying method. The scaffold was a porous material which was designed evaluating both physical properties (glass transition, melting temperature and pore size) and biological properties (cell viability and fibronectin expression). Two types of chitosan (120 and 300kDa) were used to manufacture the scaffold, being the high molecular weight the most biologically active and stable after sterilization with gamma irradiation (25kGy). A clot hydrogel was formulated with autologous plasma and calcium chloride, using an approach based on design of experiments. The optimum hydrogel was used to incorporate cells onto the porous scaffold, forming a wound dressing biomaterial. The wound dressing device was firstly tested in-vitro using human cells, and then, its biosecurity was evaluated in-vivo using a rabbit model. The in-vitro results showed high cell viability after one week (99.5%), high mitotic index (19.8%) and high fibronectin expression. The in-vivo application to rabbits showed adequate biodegradability capacity (between 1 and 2weeks), and the histological evaluation confirmed absence of rejection signs and reepithelization on the wound zone. Finally, the wound dressing biomaterial was used in a single human case to implant autologous cells on a skin surgery. The medical examination indicated high biocompatibility, partial biodegradation at one week, early regeneration capacity at 4weeks and absence of rejection signs. Copyright © 2017 Elsevier B.V. All rights reserved.

Review of the integrated thermal and nonthermal treatment system studies

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-08-01

This report contains a review and evaluation of three systems analysis studies performed by LITCO on integrated thermal treatment systems and integrated nonthermal treatment systems for the remediation of mixed low-level waste stored throughout the US Department of Energy weapons complex. The review was performed by an independent team of nine researchers from the Energy and Environmental Research Center, Science Applications International Corporation, the Waste Policy Institute, and Virginia Tech. The three studies reviewed were as follows: Integrated Thermal Treatment System Study, Phase 1--issued July 1994; Integrated Thermal Treatment System Study, Phase 2--issued February 1996; and Integrated Nonthermal Treatment System Study--drafted March 1996. The purpose of this review was to (1) determine whether the assumptions of the studies were adequate to produce an unbiased review of both thermal and nonthermal systems, (2) to identify the critical areas of the studies that would benefit from further investigation, and (3) to develop a standard template that could be used in future studies to assure a sound application of systems engineering.

Review of the integrated thermal and nonthermal treatment system studies

Energy Technology Data Exchange (ETDEWEB)

Durrani, H.A.; Schmidt, L.J.; Erickson, T.A.; Sondreal, E.A.; Erjavec, J.; Steadman, E.N.; Fabrycky, W.J.; Wilson, J.S.; Musich, M.A.

1996-07-01

This report analyzes three systems engineering (SE) studies performed on integrated thermal treatment systems (ITTSs) and integrated nonthermal treatment systems (INTSs) for the remediation of mixed low-level waste (MLLW) stored throughout the US Department of Energy (DOE) weapons complex. The review was performed by an independent team of nine researchers from the Energy and Environmental Research Center (EERC), Science Applications International Corporation (SAIC), the Waste Policy Institute (WPI), and Virginia Tech (VT). The three studies reviewed were as follows: Integrated Thermal Treatment System Study, Phase 1--issued July 1994; Integrated Thermal Treatment System Study, Phase 2--issued February 1996; and Integrated Nonthermal Treatment System Study--drafted March 1996. The purpose of this review was to (1) determine whether the assumptions taken in the studies might bias the resulting economic evaluations of both thermal and nonthermal systems, (2) identify the critical areas of the studies that would benefit from further investigation, and (3) develop a standard template that could be used in future studies to produce sound SE applications.

Review of the integrated thermal and nonthermal treatment system studies

International Nuclear Information System (INIS)

1996-08-01

This report contains a review and evaluation of three systems analysis studies performed by LITCO on integrated thermal treatment systems and integrated nonthermal treatment systems for the remediation of mixed low-level waste stored throughout the US Department of Energy weapons complex. The review was performed by an independent team of nine researchers from the Energy and Environmental Research Center, Science Applications International Corporation, the Waste Policy Institute, and Virginia Tech. The three studies reviewed were as follows: Integrated Thermal Treatment System Study, Phase 1--issued July 1994; Integrated Thermal Treatment System Study, Phase 2--issued February 1996; and Integrated Nonthermal Treatment System Study--drafted March 1996. The purpose of this review was to (1) determine whether the assumptions of the studies were adequate to produce an unbiased review of both thermal and nonthermal systems, (2) to identify the critical areas of the studies that would benefit from further investigation, and (3) to develop a standard template that could be used in future studies to assure a sound application of systems engineering

Stress Carry-Over and College Student Health Outcomes

Science.gov (United States)

Pedersen, Daphne E.

2012-01-01

Objective: Using a stress carry-over perspective, this study examines the relationship between stress stemming from school and family domains and physical and mental health outcomes. Methods: The study sample included 268 undergraduate men and women from a Midwestern university. Participants completed an anonymous online questionnaire. OLS…

INTEGRAL EDUCATION, TIME AND SPACE: PROBLEMATIZING CONCEPTS

Directory of Open Access Journals (Sweden)

Ana Elisa Spaolonzi Queiroz Assis

2018-03-01

Full Text Available Integral Education, despite being the subject of public policy agenda for some decades, still carries disparities related to its concept. In this sense, this article aims to problematize not only the concepts of integral education but also the categories time and space contained in the magazines Em Aberto. They were organized and published by the National Institute of Educational Studies Anísio Teixeira (INEP, numbers 80 (2009 and 88 (2012, respectively entitled "Educação Integral e tempo integral" and " Políticas de educação integral em jornada ampliada". The methodology is based on Bardin’s content analysis, respecting the steps of pre-analysis (research corpus formed by the texts in the journals; material exploration (reading the texts encoding data choosing the registration units for categorization; and processing and interpretation of results, based on Saviani’s Historical-Critical Pedagogy. The work reveals convergent and divergent conceptual multiplicity, provoking a discussion about a critical conception of integral education. Keywords: Integral Education. Historical-Critical Pedagogy. Content Analysis.

Parallelization of Reversible Ripple-carry Adders

DEFF Research Database (Denmark)

Thomsen, Michael Kirkedal; Axelsen, Holger Bock

2009-01-01

The design of fast arithmetic logic circuits is an important research topic for reversible and quantum computing. A special challenge in this setting is the computation of standard arithmetical functions without the generation of \\emph{garbage}. Here, we present a novel parallelization scheme...... wherein $m$ parallel $k$-bit reversible ripple-carry adders are combined to form a reversible $mk$-bit \\emph{ripple-block carry adder} with logic depth $\\mathcal{O}(m+k)$ for a \\emph{minimal} logic depth $\\mathcal{O}(\\sqrt{mk})$, thus improving on the $mk$-bit ripple-carry adder logic depth $\\mathcal...

International Space Station Configuration Analysis and Integration

Science.gov (United States)

Anchondo, Rebekah

2016-01-01

Ambitious engineering projects, such as NASA's International Space Station (ISS), require dependable modeling, analysis, visualization, and robotics to ensure that complex mission strategies are carried out cost effectively, sustainably, and safely. Learn how Booz Allen Hamilton's Modeling, Analysis, Visualization, and Robotics Integration Center (MAVRIC) team performs engineering analysis of the ISS Configuration based primarily on the use of 3D CAD models. To support mission planning and execution, the team tracks the configuration of ISS and maintains configuration requirements to ensure operational goals are met. The MAVRIC team performs multi-disciplinary integration and trade studies to ensure future configurations meet stakeholder needs.

Integrating Educational Technologies into Teacher Education: A Case Study

Science.gov (United States)

Rawlins, Peter; Kehrwald, Benjamin

2014-01-01

This article is a case study of an integrated, experiential approach to improving pre-service teachers' understanding and use of educational technologies in one New Zealand teacher education programme. The study examines the context, design and implementation of a learning activity which integrated student-centred approaches, experiential…

IRREVERSIBILITY GENERATION IN SUGAR, ALCOHOL AND BIOGAS INTEGRATED PRODUCTIONS

OpenAIRE

Meilyn González Cortés; Yenisleidy Martínez Martínez; Yailet Albernas Carvajal; Raúl A. Pérez Bermúdez

2017-01-01

In this work, the stages of losses and lower exergetic efficiency are determined when the sugar production process is integrated with others for the production of products such as biogas, torula yeast and electricity. The study is carried out in three scenarios of integrated processes for obtaining the indicated products. A sugar factory in which sugar and electricity are produced is considered as the base scenario and from this; a second scenario is inferred in which alcohol is produced from...

Analysis on the Load Carrying Mechanism Integrated as Heterogeneous Co-operative Manipulator in a Walking Wheelchair

Science.gov (United States)

Rajay Vedaraj, I. S.; Jain, Ritika; Rao, B. V. A.

2014-07-01

used for climbing stairs with three leg design and anlaysis were also done on the mechanism integrated to the system. Kinematics of the legs are analysed separately and the legs are designed to carry a maximum of 175kgs, which is sustained by the center leg and shared by the dual wing legs equally during the walking phase. In the proposed design, screwjack mechanism is used as the central leg to share the load and thus the analysis on the load sharing capability of the whole system is analysed and concluded in terms of failure modes.

Analysis on the Load Carrying Mechanism Integrated as Heterogeneous Co-operative Manipulator in a Walking Wheelchair

International Nuclear Information System (INIS)

Vedaraj, I S Rajay; Jain, Ritika; Rao, B V A

2014-01-01

used for climbing stairs with three leg design and analyses were also done on the mechanism integrated to the system. Kinematics of the legs are analysed separately and the legs are designed to carry a maximum of 175kgs, which is sustained by the center leg and shared by the dual wing legs equally during the walking phase. In the proposed design, screwjack mechanism is used as the central leg to share the load and thus the analysis on the load sharing capability of the whole system is analysed and concluded in terms of failure modes

Single-electron states near a current-carrying core

International Nuclear Information System (INIS)

Masale, M.

2004-01-01

The energy spectrum of an electron confined near a current-carrying core is obtained as a function of the azimuthal applied magnetic field within the effective-mass approximation. The double degeneracy of the non-zero electron's axial wave number (k z ) states is lifted by the current-induced magnetic field while that of the non-zero azimuthal quantum number (m) states is preserved. A further analysis is the evaluations of the oscillator strengths for optical transitions involving the lowest-order pair of the electron's energy subbands within the dipole approximation. The radiation field is taken as that of elliptically polarized light incident along the core axis. In this polarization and within the dipole approximation, the allowed transitions are only those governed by the following specific selection rules. The azimuthal quantum numbers of the initial and final states must differ by unity while the electron's axial wave number is conserved. The azimuthal magnetic field is also found to lift the multiple degeneracies of the k z ≠0 interaction integrals as well as those of the oscillator strengths for optical transitions

Integrated management of Fusarium wilt of chickpea ( Cicer ...

African Journals Online (AJOL)

The present study was carried out to assess the efficacy of an integrated management strategy for Fusarium wilt of chickpea that combined the use of microbial antagonist, botanical extract and fungicide. Before setting the experiment in field micro plots, a series of in vitro and in vivo experiments were conducted to select a ...

Consumerism and the Sister Carrie's American Dream

Institute of Scientific and Technical Information of China (English)

卢亚丽

2017-01-01

From the aspect of consumerism to this text analyze Sister Carrie's"American dream"destruction. The author wholly and deeply analyzes the embodiment of consumerism in Dreiser's Sister Carrie and Dreiser's outlook and values under the effect of consumerism. To prove that the reason for destruction of Carrie's American dream is consumerism.

Stakeholders' perspectives on the regulation and integration of complementary and alternative medicine products in Lebanon: a qualitative study

Science.gov (United States)

2011-01-01

Background The regulation of the markets for Complementary and Alternative Medicine (CAM) products presents a global challenge. There is a dearth of studies that have examined or evaluated the regulatory policies of CAM products in the Eastern Mediterranean Region (EMR). We investigate the regulatory frameworks and the barriers for the proper regulation and integration of CAM products in Lebanon, as an example of an EMR country with a weak public infrastructure. Methods We utilized a qualitative study design involving a series of semi-structured interviews with stakeholders of the CAM market in Lebanon. Snowball sampling was used to identify interviewees; interviews continued until the "saturation" point was reached. A total of 16 interviews were carried out with decision makers, representatives of professional associations, academic researchers, CAM product importers, policy makers and a media representative. Interviews were transcribed and thematic analysis of scripts was carried out. Results There was a consensus among all stakeholders that the regulation of the market for CAM products in Lebanon needs to be strengthened. Thematic analysis identified a number of impediments jeopardizing the safety of public consumption and hindering the integration of CAM therapies into mainstream medicine; including: weak infrastructure, poor regulation, ineffective policies and politics, weak CAM awareness and sub-optimal coordination and cooperation among stakeholders. With respect to policy instruments, voluntary instruments (self regulation) were deemed ineffective by stakeholders due to poor awareness of both users and providers on safe use of CAM products. Stakeholders' rather recommended the adoption of a combination of mixed (enhancing public awareness and integration of CAM into medical and nursing curricula) and compulsory (stricter governmental regulation) policy instruments for the regulation of the market for CAM products. Conclusions The current status quo with

Penalized differential pathway analysis of integrative oncogenomics studies.

Science.gov (United States)

van Wieringen, Wessel N; van de Wiel, Mark A

2014-04-01

Through integration of genomic data from multiple sources, we may obtain a more accurate and complete picture of the molecular mechanisms underlying tumorigenesis. We discuss the integration of DNA copy number and mRNA gene expression data from an observational integrative genomics study involving cancer patients. The two molecular levels involved are linked through the central dogma of molecular biology. DNA copy number aberrations abound in the cancer cell. Here we investigate how these aberrations affect gene expression levels within a pathway using observational integrative genomics data of cancer patients. In particular, we aim to identify differential edges between regulatory networks of two groups involving these molecular levels. Motivated by the rate equations, the regulatory mechanism between DNA copy number aberrations and gene expression levels within a pathway is modeled by a simultaneous-equations model, for the one- and two-group case. The latter facilitates the identification of differential interactions between the two groups. Model parameters are estimated by penalized least squares using the lasso (L1) penalty to obtain a sparse pathway topology. Simulations show that the inclusion of DNA copy number data benefits the discovery of gene-gene interactions. In addition, the simulations reveal that cis-effects tend to be over-estimated in a univariate (single gene) analysis. In the application to real data from integrative oncogenomic studies we show that inclusion of prior information on the regulatory network architecture benefits the reproducibility of all edges. Furthermore, analyses of the TP53 and TGFb signaling pathways between ER+ and ER- samples from an integrative genomics breast cancer study identify reproducible differential regulatory patterns that corroborate with existing literature.

A Study of Performance in Low-Power Tokamak Reactor with Integrated Predictive Modeling Code

International Nuclear Information System (INIS)

Pianroj, Y.; Onjun, T.; Suwanna, S.; Picha, R.; Poolyarat, N.

2009-07-01

Full text: A fusion hybrid or a small fusion power output with low power tokamak reactor is presented as another useful application of nuclear fusion. Such tokamak can be used for fuel breeding, high-level waste transmutation, hydrogen production at high temperature, and testing of nuclear fusion technology components. In this work, an investigation of the plasma performance in a small fusion power output design is carried out using the BALDUR predictive integrated modeling code. The simulations of the plasma performance in this design are carried out using the empirical-based Mixed Bohm/gyro Bohm (B/gB) model, whereas the pedestal temperature model is based on magnetic and flow shear (δ α ρ ζ 2 ) stabilization pedestal width scaling. The preliminary results using this core transport model show that the central ion and electron temperatures are rather pessimistic. To improve the performance, the optimization approach are carried out by varying some parameters, such as plasma current and power auxiliary heating, which results in some improvement of plasma performance

Integrating drivers influencing the detection of plant pests carried in the international cut flower trade.

Science.gov (United States)

Areal, F J; Touza, J; MacLeod, A; Dehnen-Schmutz, K; Perrings, C; Palmieri, M G; Spence, N J

2008-12-01

This paper analyses the cut flower market as an example of an invasion pathway along which species of non-indigenous plant pests can travel to reach new areas. The paper examines the probability of pest detection by assessing information on pest detection and detection effort associated with the import of cut flowers. We test the link between the probability of plant pest arrivals, as a precursor to potential invasion, and volume of traded flowers using count data regression models. The analysis is applied to the UK import of specific genera of cut flowers from Kenya between 1996 and 2004. There is a link between pest detection and the Genus of cut flower imported. Hence, pest detection efforts should focus on identifying and targeting those imported plants with a high risk of carrying pest species. For most of the plants studied, efforts allocated to inspection have a significant influence on the probability of pest detection. However, by better targeting inspection efforts, it is shown that plant inspection effort could be reduced without increasing the risk of pest entry. Similarly, for most of the plants analysed, an increase in volume traded will not necessarily lead to an increase in the number of pests entering the UK. For some species, such as Carthamus and Veronica, the volume of flowers traded has a significant and positive impact on the likelihood of pest detection. We conclude that analysis at the rank of plant Genus is important both to understand the effectiveness of plant pest detection efforts and consequently to manage the risk of introduction of non-indigenous species.

Integrated plant information technology design support functionality

International Nuclear Information System (INIS)

Kim, Yeon Seung; Kim, Dae Jin; Barber, P. W.; Goland, D.

1996-06-01

This technical report was written as a result of Integrated Plant Information System (IPIS) feasibility study on CANDU 9 project which had been carried out from January, 1994 to March, 1994 at AECL (Atomic Energy Canada Limited) in Canada. From 1987, AECL had done endeavour to change engineering work process from paper based work process to computer based work process through CANDU 3 project. Even though AECL had a lot of good results form computerizing the Process Engineering, Instrumentation Control and Electrical Engineering, Mechanical Engineering, Computer Aided Design and Drafting, and Document Management System, but there remains the problem of information isolation and integration. On this feasibility study, IPIS design support functionality guideline was suggested by evaluating current AECL CAE tools, analyzing computer aided engineering task and work flow, investigating request for implementing integrated computer aided engineering and describing Korean request for future CANDU design including CANDU 9. 6 figs. (Author)

Integrated plant information technology design support functionality

Energy Technology Data Exchange (ETDEWEB)

Kim, Yeon Seung; Kim, Dae Jin [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of); Barber, P W; Goland, D [Atomic Energy Canada Ltd., (Canada)

1996-06-01

This technical report was written as a result of Integrated Plant Information System (IPIS) feasibility study on CANDU 9 project which had been carried out from January, 1994 to March, 1994 at AECL (Atomic Energy Canada Limited) in Canada. From 1987, AECL had done endeavour to change engineering work process from paper based work process to computer based work process through CANDU 3 project. Even though AECL had a lot of good results form computerizing the Process Engineering, Instrumentation Control and Electrical Engineering, Mechanical Engineering, Computer Aided Design and Drafting, and Document Management System, but there remains the problem of information isolation and integration. On this feasibility study, IPIS design support functionality guideline was suggested by evaluating current AECL CAE tools, analyzing computer aided engineering task and work flow, investigating request for implementing integrated computer aided engineering and describing Korean request for future CANDU design including CANDU 9. 6 figs. (Author).

Construction of expression vectors carrying mouse peroxisomal ...

African Journals Online (AJOL)

The aim of this study was to construct expression vectors carrying mouse peroxisomal protein gene (PEP-cDNA) in prokaryotic and mammalian expression vectors in ... pGEX6p2-PEP and pUcD3-FLAG-PEP constructed vectors were transformed into the one shot TOP10 and JM105 bacterial competent cells, respectively.

Construction of expression vectors carrying mouse peroxisomal ...

African Journals Online (AJOL)

PRECIOUS

2009-11-16

Nov 16, 2009 ... The aim of this study was to construct expression vectors carrying mouse peroxisomal protein gene. (PEP-cDNA) in prokaryotic and mammalian expression vectors in chimeric cDNA types, encompassing. GST and FLAG with PEP-cDNA. PEP-cDNA was sub-cloned in pGEX6p2 prokaryotic expression ...

Solar data inputs for integration and transmission planning studies

Energy Technology Data Exchange (ETDEWEB)

Orwig, Kirsten D.; Hummon, Marissa; Hodge, Bri-Mathias; Lew, Debra [National Renewable Energy Laboratory, Golden, CO (United States)

2011-07-01

Renewable energy integration studies are frequently conducted to evaluate the impacts wind and solar power have on grid operations and planning. In the United States, these studies have historically been focused on wind energy integration. However, with the rapid deployment of large-scale and distributed solar power across the United States, and Hawaii, the interest in solar power variability and its impacts on the grid is increasing. To complete detailed integration studies, modeled power production of existing and future solar power deployments is necessary. This paper discusses some of the methods used to generate photovoltaic (PV) and concentrating solar power (CSP) production profiles for studies undertaken in the United States, evaluates the results, and compares the profiles with measured solar power production characteristics. (orig.)

The Concept of Carrying Capacity in Tourism

Directory of Open Access Journals (Sweden)

Josef Zelenka

2014-05-01

Full Text Available Carrying capacity is often pragmatically, theoretically as well as purely intuitively considered as a concept in the context of tourism sustainability. The carrying capacity application has the greatest potential in protected areas, in frequently visited cultural and natural attractions, and in relation to sustaining of the lifestyle of the local community and tourism destination potential in general. Despite its importance, partial applications, determination of basic theoretical principles, and specifying connection to the other theoretical concepts in tourism (particularly destination life cycle, LAC concept, visitors management, there still is a rightful opinion of some authors suggesting that there is no consistent theory of tourism carrying capacity. This theory would be the base for sophisticated practical carrying capacity applications. This paper is therefore focused on introduction of the theoretical concept of carrying capacity, which can be discussed and possibly further elaborated.

Evaluation of carrying capacity and territorial environmental sustainability

Directory of Open Access Journals (Sweden)

Giuseppe Ruggiero

2012-09-01

Full Text Available Land use has a great impact on environmental quality, use of resources, state of ecosystems and socio-economic development. Land use can be considered sustainable if the environmental pressures of human activities do not exceed the ecological carrying capacity. A scientific knowledge of the capability of ecosystems to provide resources and absorb waste is a useful and innovative means of supporting territorial planning. This study examines the area of the Province of Bari to estimate the ecosystems’ carrying capacity, and compare it with the current environmental pressures exerted by human activities. The adapted methodology identified the environmentally sustainable level for one province.

Generation of iPSC line from desmin-related cardiomyopathy patient carrying splice site mutation of DES gene

Directory of Open Access Journals (Sweden)

Aleksandr Khudiakov

2017-10-01

Full Text Available Human iPSC line was generated from patient-specific adipose tissue-derived mesenchymal multipotent stromal cells carrying desmin (DES gene heterozygous splice site mutation using non-integrative reprogramming method. Reprogramming factors OCT4, KLF4, SOX2, CMYC were delivered using Sendai viruses. iPSCs were characterized by sequencing, karyotype analysis, STR analysis, immunocytochemistry, RT-PCR and teratoma formation.

IRSN safety research carried out for reviewing geological disposal safety case

International Nuclear Information System (INIS)

Serres, Christophe; Besnus, Francois; Gay, Didier

2010-01-01

The Radiation Protection and Nuclear Safety Institute develops a research programme on scientific issues related to geological disposal safety in order to supporting the technical assessment carried out in the framework of the regulatory review process. This research programme is organised along key safety questions that deal with various scientific disciplines as geology, hydrogeology, mechanics, geochemistry or physics and is implemented in national and international partnerships. It aims at providing IRSN with sufficient independent knowledge and scientific skills in order to be able to assess whether the scientific results gained by the waste management organisation and their integration for demonstrating the safety of the geological disposal are acceptable with regard to the safety issues to be dealt with in the Safety Case. (author)

Research on Water Resources Design Carrying Capacity

Directory of Open Access Journals (Sweden)

Guanghua Qin

2016-04-01

Full Text Available Water resources carrying capacity (WRCC is a recently proposed management concept, which aims to support sustainable socio-economic development in a region or basin. However, the calculation of future WRCC is not well considered in most studies, because water resources and the socio-economic development mode for one area or city in the future are quite uncertain. This paper focused on the limits of traditional methods of WRCC and proposed a new concept, water resources design carrying capacity (WRDCC, which incorporated the concept of design. In WRDCC, the population size that the local water resources can support is calculated based on the balance of water supply and water consumption, under the design water supply and design socio-economic development mode. The WRDCC of Chengdu city in China is calculated. Results show that the WRDCC (population size of Chengdu city in development modeI (II, III will be 997 ×104 (770 × 104, 504 × 104 in 2020, and 934 × 104 (759 × 104, 462 × 104 in 2030. Comparing the actual population to the carrying population (WRDCC in 2020 and 2030, a bigger gap will appear, which means there will be more and more pressure on the society-economic sustainable development.

Enhanced IMC based PID controller design for non-minimum phase (NMP) integrating processes with time delays.

Science.gov (United States)

Ghousiya Begum, K; Seshagiri Rao, A; Radhakrishnan, T K

2017-05-01

Internal model control (IMC) with optimal H 2 minimization framework is proposed in this paper for design of proportional-integral-derivative (PID) controllers. The controller design is addressed for integrating and double integrating time delay processes with right half plane (RHP) zeros. Blaschke product is used to derive the optimal controller. There is a single adjustable closed loop tuning parameter for controller design. Systematic guidelines are provided for selection of this tuning parameter based on maximum sensitivity. Simulation studies have been carried out on various integrating time delay processes to show the advantages of the proposed method. The proposed controller provides enhanced closed loop performances when compared to recently reported methods in the literature. Quantitative comparative analysis has been carried out using the performance indices, Integral Absolute Error (IAE) and Total Variation (TV). Copyright © 2017 ISA. Published by Elsevier Ltd. All rights reserved.

High Quality Data for Grid Integration Studies

Energy Technology Data Exchange (ETDEWEB)

Clifton, Andrew; Draxl, Caroline; Sengupta, Manajit; Hodge, Bri-Mathias

2017-01-22

As variable renewable power penetration levels increase in power systems worldwide, renewable integration studies are crucial to ensure continued economic and reliable operation of the power grid. The existing electric grid infrastructure in the US in particular poses significant limitations on wind power expansion. In this presentation we will shed light on requirements for grid integration studies as far as wind and solar energy are concerned. Because wind and solar plants are strongly impacted by weather, high-resolution and high-quality weather data are required to drive power system simulations. Future data sets will have to push limits of numerical weather prediction to yield these high-resolution data sets, and wind data will have to be time-synchronized with solar data. Current wind and solar integration data sets are presented. The Wind Integration National Dataset (WIND) Toolkit is the largest and most complete grid integration data set publicly available to date. A meteorological data set, wind power production time series, and simulated forecasts created using the Weather Research and Forecasting Model run on a 2-km grid over the continental United States at a 5-min resolution is now publicly available for more than 126,000 land-based and offshore wind power production sites. The National Solar Radiation Database (NSRDB) is a similar high temporal- and spatial resolution database of 18 years of solar resource data for North America and India. The need for high-resolution weather data pushes modeling towards finer scales and closer synchronization. We also present how we anticipate such datasets developing in the future, their benefits, and the challenges with using and disseminating such large amounts of data.

How honey bees carry pollen

Science.gov (United States)

Matherne, Marguerite E.; Anyanwu, Gabriel; Leavey, Jennifer K.; Hu, David L.

2017-11-01

Honey bees are the tanker of the skies, carrying thirty percent of their weight in pollen per foraging trip using specialized orifices on their body. How do they manage to hang onto those pesky pollen grains? In this experimental study, we investigate the adhesion force of pollen to the honeybee. To affix pollen to themselves, honey bees form a suspension of pollen in nectar, creating a putty-like pollen basket that is skewered by leg hairs. We use tensile tests to show that the viscous force of the pollen basket is more than ten times the honeybee's flight force. This work may provide inspiration for the design of robotic flying pollinators.

Estudio experimental del Sistema de Albañilería Integral en la construcción de viviendas sismorresistentes. Experimental study of the Integral Masonry System in the construction of earthquake resistant houses

OpenAIRE

Bustamante Montoro, Rosa; Orta Rial, María Belén; Adell Argiles, Josep Maria

2012-01-01

This paper presents the application of the Integral Masonry System (IMS) to the construction of earthquake resistant houses and its experimental study. To verify the security of this new type of building in seismic areas of the third world two prototypes have been tested, one with adobe and the other with hollow brick. In both cases it’s a two-story 6x6x6 m3 house built to scale 1/2. The tests are carried out at the Laboratory of Antiseismic Structures of the Departmen...

Summaries of studies carried out in the NKS/BOK-2 project. Technical report[Radiological and environmental consequences

Energy Technology Data Exchange (ETDEWEB)

Palsson, S E [Icelandic Radiation Protection Inst., Reykjavik (Iceland)

2002-12-01

Summaries of studies carried out in the NKSBOK-2 project, Radiological and Environmental Consequences. The structure of the project as such is described in NKS-64, Radiological and Environmental Consequences - Final Report of the Nordic Nuclear Safety Research Project BOK-2. That report also includes compilations based on the summaries presented in this report. The project was carried out 1998-2001 with participants from all the Nordic countries. Representatives from the Baltic States were also invited to some of the meetings and seminars. The project consisted of work on terrestrial and marine radioecology and had a broad scope in order to enable participation of research groups with various fields of interest. The topics included improving assessment of old and recent fallout, use of radionuclides as tracers in Nordic marine areas, improving assessment of internal doses and use of mass spectrometry in radioecology. This report is a compilation of summaries from each research group, 32 papers in all, and gives references to papers published in scientific journals. Some of the studies have been described previously, at least to some degree, in NKS-70, Proceedings of the 8{sup th} Nordic Seminar on Radioecology, 25-28 February 2001, Rovaniemi, Finland. (au)

Why do three-wheelers carrying schoolchildren suffer very low fatal crashes?

Directory of Open Access Journals (Sweden)

Gaurav Pandey

2015-03-01

Full Text Available This paper investigates the possible causes of low fatalities in three-wheelers (autorickshaw carrying schoolchildren in India. The data was collected in the form of First Information Report (FIR from local police stations from 2007 to 2012 and video-graphic surveys were done on four arterial roads running through Ludhiana, Punjab, India. Surveys were also done on one subarterial road near school zone which was used by three-wheelers carrying schoolchildren. The objective of the study was to investigate the hypothesis that drivers behave differently while following or overtaking three-wheelers carrying children. Many researchers have investigated the effect of passengers on the driver of the same vehicle, but there was no evidence of any study which investigated the effect of child passengers on nearby vehicles. It was found that heavy vehicles maintain more gaps while following or overtaking three-wheelers carrying children as compared to those not carrying children. It was also found that this effect is more prominent at speeds higher than 40 km/h. On the other hand lighter vehicles keep the highest lateral and longitudinal gaps to heavy vehicles and three-wheelers without children respectively.

Analysis of Environmental Carrying Capacity with Emergy Perspective of Jeju Island

Directory of Open Access Journals (Sweden)

Chanhoon Jung

2018-05-01

Full Text Available Jeju Island experienced an approximately 42% increase in energy consumption from 2006 to 2015 and the demand for energy consumption is expected to continue to increase. Thus, Jeju Island is planning a project entitled “Carbon Free Island by 2030” to promote sustainable development and is required to estimate the environmental carrying capacity for future energy demand changes. The purpose of this study was to calculate the emergy inherent in Jeju Island’s energy, materials, and information in 2015 using the emergy analysis method and local characteristics. In addition, this study aimed to estimate the emergy indices to evaluate the environmental carrying capacity for sustainable development in 2005, 2015, and 2030 considering the future energy demand. This study’s outputs provide the environmental carrying capacity with emergy indices, such as the percent renewable (%Renew, emergy yield ratio (EYR, environmental loading ratio (ELR, sustainability index (SI, and carrying capacity of the population (CCP for social and economic activities on Jeju Island, which are expected to be saturated. These findings show regions with heavy tourism require development strategies, including the concept of environmental carrying capacity.

Studies on esterase isozymes and mycelium growth speed of ganoderma lucidum carried by Shenzhou spaceship

International Nuclear Information System (INIS)

Qi Jianjun; Chen Xiangdong; Lan Jin

2002-01-01

The esterase isozymes and mycelium growth speed of four Ganoderma lucidum strains carried by Shenzhou spaceship were studied. The results showed that different effects occurred to esterase and mycelium growth speed. The SX, S3 esterase band had changed compared with their control CX, C3, respectively, but there were no differences between SH and CH, S4 and C4. The growth speed of S4 strain was faster than its control C4, SX strain lower than its control CX, and there were no difference between SH and CH, S3 and C3

Case Studies in Environment Integration

Science.gov (United States)

1991-12-01

such as CADRE Teamwork and Frame Technology FrameMaker , are integrated. Future plans include integrating additional software development tools into...Pictures, Sabre C, and Interleaf or FrameMaker . Cad- re Technologies has announced integration agreements with Saber C and Pansophic, as well as offering...access to the Interleaf and FrameMaker documentation tools. While some of the current agreements between vendors to create tool coalitions are

Social Integration and Sleep Disturbance: A Gene-Environment Interaction Study

Directory of Open Access Journals (Sweden)

David A. Sbarra

2016-03-01

Full Text Available Objective: Low levels of perceived social integration, or loneliness, are associated with increased risk for a range of poor health outcomes. Sleep disturbance plays a central role in the evolutionary theory of loneliness, which provides a mechanistic account of how low levels of social integration may negatively impact health. No studies, however, have examined whether the association between social integration and sleep disturbance is consistent with a causal effect after accounting for genes that are common to both variables.  Method: Using twin data ('N' = 905 twin pairs from the nationally-representative Midlife in the United States (MIDUS survey, I evaluated a series of bivariate twin models exploring whether the phenotypic association between low social integration and sleep disturbance can be explained by shared genetics. In addition, the current study specified a series of quantitative models for studying gene x environment (G X E interactions to determine whether the genetic and environmental influences on sleep disturbance differ as a function of social integration. Results: The phenotypic association between social integration and sleep disturbance was fully accounted for by genes that are common between the two variables, suggesting that within-twin pair differences in social integration do not exert a causal influence on sleep disturbance. Social integration, however, moderated the non-shared environmental influence on sleep disturbances, with the greatest environmental influences observed at the lowest levels of social integration. Conclusions: The results of this study suggest that an essential feature of the evolutionary model of loneliness may need refinement or elaboration. The moderation findings are discussed in terms of the fit with a stress-buffering model of social support in which environmental influences on sleep disturbance are strongest when social resources are low.

长治湿地公园生态旅游环境容量研究%Study on the Ecotourism Carrying Capacity of Changzhi Wetland Park

Institute of Scientific and Technical Information of China (English)

宋珂; 樊正球; 信欣; 王新军; 王原

2011-01-01

生态旅游环境容量作为衡量旅游环境与旅游发展是否协调的重要尺度,为旅游的可持续发展提供了较为客观的判断依据.从长治湿地公园自身的承受能力出发,综合旅游生态容量（Ce）与旅游空间容量（Cs）两方面因素评估区域的生态旅游环境容量（其中Ce为40 632～52 366（人次/d）,Cs为28 872～55 376（人次/d）,对长治湿地公园的规划建设和管理提出3个不同的情景方案.%Ecotourism carrying capacity is a standard to measure the coordination between tourism environment and tourism development.It provides a basis judgment for the sustainable development of tourism.Based on the analyses of the ecological environmental carrying capacity（Ce）and the ecological spatial carrying capacity（Cs）,an integrated estimation on the carrying capacity of Changzhi Wetland Park was made（In which Ce is 40632—52366 passengers/day,Cs is 28872—55376 passengers/day）.Finally,three scenario programs were put forward,which could be of practical and instructive significances in the planning and management of this wetland park.

Carry-over effects on the annual cycle of a migratory seabird: an experimental study.

Science.gov (United States)

Fayet, Annette L; Freeman, Robin; Shoji, Akiko; Kirk, Holly L; Padget, Oliver; Perrins, Chris M; Guilford, Tim

2016-11-01

Long-lived migratory animals must balance the cost of current reproduction with their own condition ahead of a challenging migration and future reproduction. In these species, carry-over effects, which occur when events in one season affect the outcome of the subsequent season, may be particularly exacerbated. However, how carry-over effects influence future breeding outcomes and whether (and how) they also affect behaviour during migration and wintering is unclear. Here we investigate carry-over effects induced by a controlled, bidirectional manipulation of the duration of reproductive effort on the migratory, wintering and subsequent breeding behaviour of a long-lived migratory seabird, the Manx shearwater Puffinus puffinus. By cross-fostering chicks of different age between nests, we successfully prolonged or shortened by ∼25% the chick-rearing period of 42 breeding pairs. We tracked the adults with geolocators over the subsequent year and combined migration route data with at-sea activity budgets obtained from high-resolution saltwater-immersion data. Migratory behaviour was also recorded during non-experimental years (the year before and/or two years after manipulation) for a subset of birds, allowing comparison between experimental and non-experimental years within treatment groups. All birds cared for chicks until normal fledging age, resulting in birds with a longer breeding period delaying their departure on migration; however, birds that finished breeding earlier did not start migrating earlier. Increased reproductive effort resulted in less time spent at the wintering grounds, a reduction in time spent resting daily and a delayed start of breeding with lighter eggs and chicks and lower breeding success the following breeding season. Conversely, reduced reproductive effort resulted in more time resting and less time foraging during the winter, but a similar breeding phenology and success compared with control birds the following year, suggesting that

A Case Study in Carry Trade and Cross Pair Allegiance Switching, Pre and Post 2008

OpenAIRE

Brian Twomey

2015-01-01

EUR/USD, USD/JPY and the position of EUR/JPY was investigated in this paper using regression analysis with the overarching question where EUR/JPY sits in relation to both pairs and its position in terms of a carry trade. What was determined was EUR/JPY switches allegiance period to period. The carry trade premise is to borrow a low interest rate currency and lend in a high interest rate currency. The low interest rate currency becomes the fund currency while the high interest rate currency be...

Cost reductions on a food processing plant identified by a process integration study at Cadbury Typhoo Ltd

Energy Technology Data Exchange (ETDEWEB)

Clayton, R.W. (Energy Technology Support Unit, Harwell (UK))

1986-08-01

The purpose of a process integration study is to determine the minimum practical amount of energy required to operate a process and to identify the minimum cost schemes to maximise savings consistent with planning and operating criteria. The British-led development of Pinch Technology provides a more systematic approach. This technique involves the rigorous application of thermodynamic principles and cost accounting whilst taking account of practical engineering and operability constraints. Cadbury Typhoo Ltd is part of the Cadbury Schweppes Group. The company produces and markets hot and cold beverage products. A process integration study was carried out at the company's Knighton manufacturing site where 'instant' powder beverage ingredients are made and packaged. The total energy bill at the site is in the region of Pound 0.5 million/year. The process energy bill is around Pound 300-350,000/year. The first significant opportunity involves changing the actual process by a different piping arrangement. For a capital expenditure of around Pound 1,000, savings worth Pound 25,000/year can be achieved with a payback of approximately two weeks. (author).

Relating Academics' Ways of Integrating Research and Teaching to Their Students' Perceptions

Science.gov (United States)

Visser-Wijnveen, Gerda J.; van Driel, Jan H.; van der Rijst, Roeland M.; Visser, Anthonya; Verloop, Nico

2012-01-01

A wide variety of studies has been carried out regarding the way academics view the research-teaching nexus, while other studies have focused on the students' experience of research-intensive environments. This study links these two research streams, and describes how 12 staff members in a faculty of humanities integrate research into their…

Profile of women who carried out smoking cessation treatment: a systematic review.

Science.gov (United States)

Pereira, Caroline Figueira; de Vargas, Divane

2015-01-01

OBJECTIVE Analyze the profile of women, in health services, who carry out treatment for smoking cessation. METHODS Systematic review that used the following sources of information: Cummulative Index to Nursing and Allied Health Literature (CINAHL), PubMed, Biblioteca Virtual em Saúde (BVS), Scopus and Web of Science. We included quantitative studies that addressed the characterization of women, in health services, who carried out treatment for smoking cessation, resulting in 12 articles for analysis. The assessment of the methodological quality of the studies was performed using the instrument MAStARI from Joanna Briggs Institute. RESULTS The predominant profile of women who carried out treatment for smoking cessation in health services was composed of white, married, employed, and highly level educated women. Women who carried out the treatment for smoking cessation in specialized services had a more advanced age, were white, were married and had a diagnosis of depression. The quality level of most studies was moderate. CONCLUSIONS The profile of women who carry out treatment for smoking cessation, either in general or specialized health services, is composed of white, married, and highly level educated women. Publications about smoking women are scarce and the lack of Brazilian studies characterizing the profile of women who start treatment for smoking cessation shows the need for studies that explore this subject.

Profile of women who carried out smoking cessation treatment: a systematic review

Directory of Open Access Journals (Sweden)

Caroline Figueira Pereira

2015-01-01

Full Text Available OBJECTIVE Analyze the profile of women, in health services, who carry out treatment for smoking cessation. METHODS Systematic review that used the following sources of information: Cummulative Index to Nursing and Allied Health Literature (CINAHL, PubMed, Biblioteca Virtual em Saúde (BVS, Scopus and Web of Science. We included quantitative studies that addressed the characterization of women, in health services, who carried out treatment for smoking cessation, resulting in 12 articles for analysis. The assessment of the methodological quality of the studies was performed using the instrument MAStARI from Joanna Briggs Institute. RESULTS The predominant profile of women who carried out treatment for smoking cessation in health services was composed of white, married, employed, and highly level educated women. Women who carried out the treatment for smoking cessation in specialized services had a more advanced age, were white, were married and had a diagnosis of depression. The quality level of most studies was moderate. CONCLUSIONS The profile of women who carry out treatment for smoking cessation, either in general or specialized health services, is composed of white, married, and highly level educated women. Publications about smoking women are scarce and the lack of Brazilian studies characterizing the profile of women who start treatment for smoking cessation shows the need for studies that explore this subject.

Weapon carrying and psychopathic-like features in a population-based sample of Finnish adolescents.

Science.gov (United States)

Saukkonen, Suvi; Laajasalo, Taina; Jokela, Markus; Kivivuori, Janne; Salmi, Venla; Aronen, Eeva T

2016-02-01

We investigated the prevalence of juvenile weapon carrying and psychosocial and personality-related risk factors for carrying different types of weapons in a nationally representative, population-based sample of Finnish adolescents. Specifically, we aimed to investigate psychopathic-like personality features as a risk factor for weapon carrying. The participants were 15-16-year-old adolescents from the Finnish self-report delinquency study (n = 4855). Four different groups were formed based on self-reported weapon carrying: no weapon carrying, carrying knife, gun or other weapon. The associations between psychosocial factors, psychopathic-like features and weapon carrying were examined with multinomial logistic regression analysis. 9% of the participants had carried a weapon in the past 12 months. Adolescents with a history of delinquency, victimization and antisocial friends were more likely to carry weapons in general; however, delinquency and victimization were most strongly related to gun carrying, while perceived peer delinquency (antisocial friends) was most strongly related to carrying a knife. Better academic performance was associated with a reduced likelihood of carrying a gun and knife, while feeling secure correlated with a reduced likelihood of gun carrying only. Psychopathic-like features were related to a higher likelihood of weapon carrying, even after adjusting for other risk factors. The findings of the study suggest that adolescents carrying a weapon have a large cluster of problems in their lives, which may vary based on the type of weapon carried. Furthermore, psychopathic-like features strongly relate to a higher risk of carrying a weapon.

Some continual integrals from gaussian forms

International Nuclear Information System (INIS)

Mazmanishvili, A.S.

1985-01-01

The result summary of continual integration of gaussian functional type is given. The summary contains 124 continual integrals which are the mathematical expectation of the corresponding gaussian form by the continuum of random trajectories of four types: real-valued Ornstein-Uhlenbeck process, Wiener process, complex-valued Ornstein-Uhlenbeck process and the stochastic harmonic one. The summary includes both the known continual integrals and the unpublished before integrals. Mathematical results of the continual integration carried in the work may be applied in the problem of the theory of stochastic process, approaching to the finding of mean from gaussian forms by measures generated by the pointed stochastic processes

ALICE-ARC integration

DEFF Research Database (Denmark)

Anderlik, Csaba; Gregersen, Anders Rhod; Kleist, Josva

2008-01-01

Data Grid Facility (NDGF). In this paper we will present our approach to integrate AliEn and ARC, in the sense that ALICE data management and job processing can be carried out on the NDGF infrastructure, using the client tools available in AliEn. The interoperation has two aspects, one is the data...

Scaling for integral simulation of thermal-hydraulic phenomena in SBWR during LOCA

Energy Technology Data Exchange (ETDEWEB)

Ishii, M.; Revankar, S.T.; Dowlati, R [Purdue Univ., West Layfayette, IN (United States)] [and others

1995-09-01

A scaling study has been conducted for simulation of thermal-hydraulic phenomena in the Simplified Boiling Water Reactor (SBWR) during a loss of coolant accident. The scaling method consists of a three-level scaling approach. The integral system scaling (global scaling or top down approach) consists of two levels, the integral response function scaling which forms the first level, and the control volume and boundary flow scaling which forms the second level. The bottom up approach is carried out by local phenomena scaling which forms the third level scaling. Based on this scaling study the design of the model facility called Purdue University Multi-Dimensional Integral Test Assembly (PUMA) has been carried out. The PUMA facility has 1/4 height and 1/100 area ratio scaling, corresponding to the volume scaling of 1/400. The PUMA power scaling based on the integral scaling is 1/200. The present scaling method predicts that PUMA time scale will be one-half that of the SBWR. The system pressure for PUMA is full scale, therefore, a prototypic pressure is maintained. PUMA is designed to operate at and below 1.03 MPa (150 psi), which allows it to simulate the prototypic SBWR accident conditions below 1.03 MPa (150 psi). The facility includes models for all components of importance.

Characterization of a Streptococcus suis tet(O/W/32/O)-carrying element transferable to major streptococcal pathogens.

Science.gov (United States)

Palmieri, Claudio; Magi, Gloria; Mingoia, Marina; Bagnarelli, Patrizia; Ripa, Sandro; Varaldo, Pietro E; Facinelli, Bruna

2012-09-01

Mosaic tetracycline resistance determinants are a recently discovered class of hybrids of ribosomal protection tet genes. They may show different patterns of mosaicism, but their final size has remained unaltered. Initially thought to be confined to a small group of anaerobic bacteria, mosaic tet genes were then found to be widespread. In the genus Streptococcus, a mosaic tet gene [tet(O/W/32/O)] was first discovered in Streptococcus suis, an emerging drug-resistant pig and human pathogen. In this study, we report the molecular characterization of a tet(O/W/32/O) gene-carrying mobile element from an S. suis isolate. tet(O/W/32/O) was detected, in tandem with tet(40), in a circular 14,741-bp genetic element (39.1% G+C; 17 open reading frames [ORFs] identified). The novel element, which we designated 15K, also carried the macrolide resistance determinant erm(B) and an aminoglycoside resistance four-gene cluster including aadE (streptomycin) and aphA (kanamycin). 15K appeared to be an unstable genetic element that, in the absence of recombinases, is capable of undergoing spontaneous excision under standard growth conditions. In the integrated form, 15K was found inside a 54,879-bp integrative and conjugative element (ICE) (50.5% G+C; 55 ORFs), which we designated ICESsu32457. An ∼1.3-kb segment that apparently served as the att site for excision of the unstable 15K element was identified. The novel ICE was transferable at high frequency to recipients from pathogenic Streptococcus species (S. suis, Streptococcus pyogenes, Streptococcus pneumoniae, and Streptococcus agalactiae), suggesting that the multiresistance 15K element can successfully spread within streptococcal populations.

Students' Involvement in Social Networking and Attitudes towards Its Integration into Teaching

Science.gov (United States)

Umoh, Ukeme Ekpedeme; Etuk, Etuk Nssien

2016-01-01

The study examined Students' Involvement in Social Networking and attitudes towards its Integration into Teaching. The study was carried out in the University of Uyo, Akwa Ibom State, Nigeria. The population of the study consisted of 17,618 undergraduate students enrolled into full time degree programmes in the University of Uyo for 2014/2015…

A Study on Lean Manufacturing Practice Carried Out for Axle Housing Plant

Directory of Open Access Journals (Sweden)

Rishi J. P.

2018-01-01

Full Text Available Lean Manufacturing is a way to deal with the elimination of waste through persistent change within the system. The assembling units in India should likewise hope to take its preferences. The Industries are energetically following the Lean assembling strategies to reduce waste and cost. The present work is the study of a manufacturing process for axle housing and to decide how Lean manufacturing process carried out for axle housing plant to improve productivity. The new shot peening machine was installed in a heat treatment plant of a housing line in an automobile rear axle assembly plant and material handling time from storage to this new machine was more and this increased lead time subsequently. To reduce this Kaizens technique was employed and a direct gravity conveyor was chosen and installed between two work stations and the part was directly fed to the new machine installed and this reduces the material handling time considerably. A cost analysis was done to realize the benefits of implementing this lean technique. Therefore reducing lead time and increasing productivity is the Prime benefits of lean manufacturing practices like lean assembly.

SCIENTIFIC STUDY OF NATURE AND SCIENTIFIC STUDY OF CULTURE: INTE-GRATION TREND, PRACTICAL VALUE

Directory of Open Access Journals (Sweden)

Fokina Zoya Titovna

2017-03-01

Full Text Available This article deals with a topic of interest : studying the expanding and deepening trend of integration of natural, technical, social and humanities fields of scientific knowledge. The point of absolute opposition between the sciences dealing with nature and those dealing with culture is subjected to criticism, the forms of integration of scientific knowledge are identified: mathematization, formalization, computerization of knowledge; philosophization/dialectization and environmentalization of the scientific knowledge. It is noted that such areas of scientific knowledge as synergetics, cybernetics, system theory, information technology, sociosynergetics, historical informatics, cliometrics, informatics for economics, evolutionary economics, human ecology, etc. Many scientific fields appear on the border between the science, technology and mathematics, and social and humanities studies, while the sharp borders between the natural sciences and cultural sciences tend to disappear, although specifics of studying the social reality still exists. Within the context of integration of sciences, comprehensive approach, synergetics, cybernetics, and mathematical model approach are analyzed. The philosophy of technology, and environmental problems, which are caused by the development of technological civilization, are studied. Practical value of integration processes in science is identified. The studied data is addressed to the specialists who are interested in the modern processes of integration of sciences, and modern issues of scientific and technical development of humanity, survival of humanity under the conditions of increasing technological understanding of the nature.

Integrated STEM in secondary education: A case study

International Nuclear Information System (INIS)

De Meester, Jolien; Dehaene, Wim; Knipprath, Heidi; Thielemans, Jan; De Cock, Mieke; Langie, Greet

2015-01-01

Despite many opportunities to study STEM (Science, Technology, Engineering and Mathematics) in Flemish secondary education, only a minority of pupils are actually pursuing STEM fields in higher education and jobs. One reason could be that they do not see the relevance of science and mathematics. In order to draw their pupils’ interest in STEM, a Belgian school started a brand new initiative: the school set up and implemented a first year course that integrates various STEM disciplines, hoping to provide an answer to the question pupils often ask themselves about the need to study math and science. The integrated curriculum was developed by the school’s teachers and a STEM education research group of the University of Leuven. To examine the pupils’ attitude towards STEM and STEM professions and their notion of relevance of STEM at the end of this one-year course, a post-test was administered to the group of pupils who attended the integrated STEM course (the experimental group) and to a group of pupils that took traditional, non-integrated STEM courses (the control group). The results reveal that attending the integrated STEM course is significantly related to pupils’ interest in STEM and notion of relevance of STEM. Another post-test was administered only to the experimental group to investigate pupils’ understanding of math and physics concepts and their relation when taught in an integrated way. The results reveal that the pupils have some conceptual understanding and can, to a certain extent, make a transfer of concepts across different STEM disciplines. However, the test results did point out that some additional introductory training in pure math context is needed.

Hawaii Solar Integration Study: Solar Modeling Developments and Study Results; Preprint

Energy Technology Data Exchange (ETDEWEB)

Orwig, K.; Corbus, D.; Piwko, R.; Schuerger, M.; Matsuura, M.; Roose, L.

2012-12-01

The Hawaii Solar Integration Study (HSIS) is a follow-up to the Oahu Wind Integration and Transmission Study completed in 2010. HSIS focuses on the impacts of higher penetrations of solar energy on the electrical grid and on other generation. HSIS goes beyond the island of Oahu and investigates Maui as well. The study examines reserve strategies, impacts on thermal unit commitment and dispatch, utilization of energy storage, renewable energy curtailment, and other aspects of grid reliability and operation. For the study, high-frequency (2-second) solar power profiles were generated using a new combined Numerical Weather Prediction model/ stochastic-kinematic cloud model approach, which represents the 'sharp-edge' effects of clouds passing over solar facilities. As part of the validation process, the solar data was evaluated using a variety of analysis techniques including wavelets, power spectral densities, ramp distributions, extreme values, and cross correlations. This paper provides an overview of the study objectives, results of the solar profile validation, and study results.

Nova Scotia wind integration study : final report

International Nuclear Information System (INIS)

2008-01-01

An independent study was commissioned by the Nova Scotia Department of Energy to identify and assess the impacts of integrating large scale wind power generation into Nova Scotia's electric power system. The purpose of the study was to help Nova Scotia's efforts towards building its renewable energy supply, in order to secure a local energy resource and to protect the environment. This report provided an overview of Nova Scotia's electric power sector, including organizations involved; existing generation system; existing transmission system; renewable energy standards; Nova Scotia Power integrated resource plan; and 2007 renewable energy request for proposals. The major assumptions for the study that were discussed included system parameters; system capacity reserve requirements; expansion plans to 2020; and allocation of new wind generation by zone. Wind resource data and system dispatch modeling were also presented and transmission system modeling was outlined. This included a discussion of steady state reliability requirements; inputs to the load flow model; load flow study and contingency analysis; intra-province transmission congestion; and potential impacts on system security. The report also presented an approach to impact analysis and mitigation such as the impact on greenhouse gas and other air emissions and the impact of wind energy prices on system costs. It was concluded that one of the most important factors in evaluation of the economic impact of wind power integration is the forecasted fuel prices for the thermal units. If the fuel prices had varied significantly from the forecasted values, the study economic impact results could have been quite different. 55 tabs., 64 figs., 1 appendix

49 CFR 192.915 - What knowledge and training must personnel have to carry out an integrity management program?

Science.gov (United States)

2010-10-01

... Relating to Transportation (Continued) PIPELINE AND HAZARDOUS MATERIALS SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) PIPELINE SAFETY TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Gas Transmission Pipeline Integrity Management § 192.915 What knowledge...

The Integration of Trade Books into the Social Studies Curriculum.

Science.gov (United States)

Fuhler, Carol J.

1992-01-01

Safe, noncontroversial social studies textbooks are neither meaningful nor necessary according to many students. As an alternative, teachers can integrate well-written trade books into the social studies curriculum. Well-researched diaries, journals, biographies, and autobiographies should become an integral part of the curriculum. (28 references)…

A rotorcraft flight/propulsion control integration study

Science.gov (United States)

Ruttledge, D. G. C.

1986-01-01

An eclectic approach was taken to a study of the integration of digital flight and propulsion controls for helicopters. The basis of the evaluation was the current Gen Hel simulation of the UH-60A Black Hawk helicopter with a model of the GE T700 engine. A list of flight maneuver segments to be used in evaluating the effectiveness of such an integrated control system was composed, based on past experience and an extensive survey of the U.S. Army Air-to-Air Combat Test data. A number of possible features of an integrated system were examined and screened. Those that survived the screening were combined into a design that replaced the T700 fuel control and part of the control system in the UH-60A Gen Hel simulation. This design included portions of an existing pragmatic adaptive fuel control designed by the Chandler-Evans Company and an linear quadratic regulator (LQR) based N(p) governor designed by the GE company, combined with changes in the basic Sikorsky Aircraft designed control system. The integrated system exhibited improved total performance in many areas of the flight envelope.

Research at ITER towards DEMO: Specific reactor diagnostic studies to be carried out on ITER

Energy Technology Data Exchange (ETDEWEB)

Krasilnikov, A. V.; Kaschuck, Y. A.; Vershkov, V. A.; Petrov, A. A.; Petrov, V. G.; Tugarinov, S. N. [Institution Project center ITER, Moscow (Russian Federation)

2014-08-21

In ITER diagnostics will operate in the very hard radiation environment of fusion reactor. Extensive technology studies are carried out during development of the ITER diagnostics and procedures of their calibration and remote handling. Results of these studies and practical application of the developed diagnostics on ITER will provide the direct input to DEMO diagnostic development. The list of DEMO measurement requirements and diagnostics will be determined during ITER experiments on the bases of ITER plasma physics results and success of particular diagnostic application in reactor-like ITER plasma. Majority of ITER diagnostic already passed the conceptual design phase and represent the state of the art in fusion plasma diagnostic development. The number of related to DEMO results of ITER diagnostic studies such as design and prototype manufacture of: neutron and γ–ray diagnostics, neutral particle analyzers, optical spectroscopy including first mirror protection and cleaning technics, reflectometry, refractometry, tritium retention measurements etc. are discussed.

Research at ITER towards DEMO: Specific reactor diagnostic studies to be carried out on ITER

Science.gov (United States)

Krasilnikov, A. V.; Kaschuck, Y. A.; Vershkov, V. A.; Petrov, A. A.; Petrov, V. G.; Tugarinov, S. N.

2014-08-01

In ITER diagnostics will operate in the very hard radiation environment of fusion reactor. Extensive technology studies are carried out during development of the ITER diagnostics and procedures of their calibration and remote handling. Results of these studies and practical application of the developed diagnostics on ITER will provide the direct input to DEMO diagnostic development. The list of DEMO measurement requirements and diagnostics will be determined during ITER experiments on the bases of ITER plasma physics results and success of particular diagnostic application in reactor-like ITER plasma. Majority of ITER diagnostic already passed the conceptual design phase and represent the state of the art in fusion plasma diagnostic development. The number of related to DEMO results of ITER diagnostic studies such as design and prototype manufacture of: neutron and γ-ray diagnostics, neutral particle analyzers, optical spectroscopy including first mirror protection and cleaning technics, reflectometry, refractometry, tritium retention measurements etc. are discussed.

Research at ITER towards DEMO: Specific reactor diagnostic studies to be carried out on ITER

International Nuclear Information System (INIS)

Krasilnikov, A. V.; Kaschuck, Y. A.; Vershkov, V. A.; Petrov, A. A.; Petrov, V. G.; Tugarinov, S. N.

2014-01-01

In ITER diagnostics will operate in the very hard radiation environment of fusion reactor. Extensive technology studies are carried out during development of the ITER diagnostics and procedures of their calibration and remote handling. Results of these studies and practical application of the developed diagnostics on ITER will provide the direct input to DEMO diagnostic development. The list of DEMO measurement requirements and diagnostics will be determined during ITER experiments on the bases of ITER plasma physics results and success of particular diagnostic application in reactor-like ITER plasma. Majority of ITER diagnostic already passed the conceptual design phase and represent the state of the art in fusion plasma diagnostic development. The number of related to DEMO results of ITER diagnostic studies such as design and prototype manufacture of: neutron and γ–ray diagnostics, neutral particle analyzers, optical spectroscopy including first mirror protection and cleaning technics, reflectometry, refractometry, tritium retention measurements etc. are discussed

Effect of Gamma Radiation on Amino Acid Based Vesicle Carrying Radiosensitizer

International Nuclear Information System (INIS)

Nur Ratasha Alia Mohd Rosli; Faizal Mohamed; Muhammad Amir Syafiq Mohd Sah; Irman Abdul Rahman

2014-01-01

Vesicles has been developed and studied to be used as a medium to transport radiosensitizer in treating cancer cells by increasing its sensitivity effectively towards the radiation given during radiotherapy. This study was conducted to investigate the effect of gamma radiation on amino acid-based vesicle carrying radiosensitizer. Amino acid based vesicles carrying radiosensitizer were synthesized using sonication method with sodium N-lauroylsarcosinate hydrate and decanol being the primary surfactant, while hydrogen peroxide and sodium hyaluronate as the encapsulated radiosensitizer. The synthesized vesicle was then irradiated at radiation doses equivalent to those given during radiotherapy. Irradiated vesicle carrying radiosensitizer were then characterized using Transmission Electron Microscopy (TEM), Fourier Transform Infrared Spectroscopy (FTIR) and Polarized Light Microscope. Results obtained shows that there were no significant changes in morphology and molecular conformation of the synthesized vesicle after irradiation. Even at higher radiation dose of 100 Gray and 200 Gray, the results remained unchanged. This indicates that the synthesized vesicle carrying radiosensitizer is morphologically and spectroscopically stable even at high radiation doses. (author)

Integrating a social network group with a 3D collaborative learning environment

NARCIS (Netherlands)

Pourmirza, S.; Gardner, M.; Callaghan, V; Augusto, J.C.; Zhang, T.

2014-01-01

Although extensive research has been carried out on virtual learning environments and the role of groups and communities in social networks, few studies exist which adequately cover the relationship between these two domains. In this paper, the authors demonstrate the effectiveness of integrating

Integrated Genome-Based Studies of Shewanella Ecophysiology

Energy Technology Data Exchange (ETDEWEB)

Zhou, Jizhong [Univ. of Oklahoma, Norman, OK (United States); He, Zhili [Univ. of Oklahoma, Norman, OK (United States)

2014-04-08

As a part of the Shewanella Federation project, we have used integrated genomic, proteomic and computational technologies to study various aspects of energy metabolism of two Shewanella strains from a systems-level perspective.

Effect of Baffles on the Sloshing in Road Tankers Carrying LPG: A Comparative Numerical Study

Directory of Open Access Journals (Sweden)

J. L. Bautista-Jacobo

2015-01-01

Full Text Available This work presents a comparative numerical study of the effect of using baffles, and its design, on the behavior of sloshing in a partially filled road tanker carrying LPG. Navier-Stokes equations and standard k-ε turbulence model are used to simulate fluid movement; the Volume of Fluid (VOF method is used to track the liquid-gas interface. Velocity distributions, sloshing stabilization times, and contours of turbulent kinetic energy, which are of high importance in choosing the best design of baffles, are shown. The results show sloshing stabilization times of 22 and 21 s for road tankers with cross-shaped (Type I and X-shaped (Type II baffles, respectively, finding lower values of turbulent kinetic energy for Type II design, being, therefore, the best design of baffles for damping of sloshing and vehicle control among studied ones.

Examining Adolescent Suicidal Behaviors in Relation to Gun Carrying and Bullying

Science.gov (United States)

Romero, Andrea; Bauman, Sheri; Ritter, Marissa; Anand, Payal

2017-01-01

Guided by the interpersonal theory of suicide, this study examines the associations between gun carrying, bullying, and suicidal behaviors among high school students. Arizona Youth Risk Behavior Surveys were completed by 2,677 students in 2011; 9.0% reported suicide attempt in the past year, 5.5% carried a gun in the past 30 days, 8.5% were…

Integrated energy wood and pulpwood harvesting in first-thinning stands

Energy Technology Data Exchange (ETDEWEB)

Kaerhae, K.; Pajuoja, H. (Metsaeteho Oy, Helsinki (Finland)), Email: kalle.karha@metsateho.fi, Email: heikki.pajuoja@metsateho.fi; Hoegnaes, T. (Metsaehallitus, Kajaani (Finland)), Email: tore.hognas@metsa.fi; Mutikainen, A. (TTS Research, Rajamaeki (Finland)), Email: arto.mutikainen@tts.fi

2009-07-01

The integrated harvesting of industrial roundwood and energy wood by the so-called 'two-pile cutting method' has increased strongly in young forests in Finland during the last two years. The studies carried out by Metsaeteho Oy, Metsaehallitus and TTS Research (I) determined the time consumption and productivity in cutting work when using the integrated cutting of first-thinning wood, (II) clarified the development of the total removal in integrated harvesting operation, and (III) investigated the quality of pulpwood poles when using integrated the quality of pulpwood poles when using integrated cutting with multi-tree handling. The studies indicated that the total removal in integrated wood harvesting increases significantly compared to that of conventional, separate roundwood harvesting. When the total removal from the harvesting site increased considerably, there was a significant increase in the productivity of cutting work in integrated wood harvesting compared to the situation in separate pulpwood harvesting. In addition, the delimbing quality and bucking accuracy of the pulpwood poles obtained in multi-tree processing were comparable to those produced in single-tree handling. There were no problems with measuring the work output by a grapple scale attached to the boom of the forwarder. As the studies indicated very promising experiences in integrated wood cutting, integrated harvesting is likely to continue to increase in both first and later thinning in Finland. (orig.)

Process Integration Study of Cache Valley Cheese Plant [Advanced Industrial Heat Pump Applications and Evaluations

Energy Technology Data Exchange (ETDEWEB)

Eastwood, A.

1991-10-01

This work has carried out in two phases: Phase 1; identification of opportunities for heat pumps in industrial applications and Phase 2; evaluation of heat pumps in industrial applications. In Phase 1, pinch analysis was applied to several industrial sites to identify the best opportunities for heat pumping and other forms of heat integration. In Phase 2, more detailed analyses were undertaken, including the evaluation of a heat pump installed as a recommendation of Phase 1.

30 CFR 56.16014 - Operator-carrying overhead cranes.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Operator-carrying overhead cranes. 56.16014 Section 56.16014 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... Storage and Handling § 56.16014 Operator-carrying overhead cranes. Operator-carrying overhead cranes shall...

30 CFR 57.16014 - Operator-carrying overhead cranes.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Operator-carrying overhead cranes. 57.16014 Section 57.16014 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... Storage and Handling § 57.16014 Operator-carrying overhead cranes. Operator-carrying overhead cranes shall...

"The Bell Curve" and Carrie Buck: Eugenics Revisited.

Science.gov (United States)

Smith, J. David

1995-01-01

The 1994 publication of "The Bell Curve" by R. Herrnstein and C. Murray is compared to other examples of eugenic principles, including the sterilization of "feebleminded" Carrie Buck, family degeneracy studies focusing on lower class Caucasian families, and other works that view the poorest and least educated members of society…

Theory, modeling, and integrated studies in the Arase (ERG) project

Science.gov (United States)

Seki, Kanako; Miyoshi, Yoshizumi; Ebihara, Yusuke; Katoh, Yuto; Amano, Takanobu; Saito, Shinji; Shoji, Masafumi; Nakamizo, Aoi; Keika, Kunihiro; Hori, Tomoaki; Nakano, Shin'ya; Watanabe, Shigeto; Kamiya, Kei; Takahashi, Naoko; Omura, Yoshiharu; Nose, Masahito; Fok, Mei-Ching; Tanaka, Takashi; Ieda, Akimasa; Yoshikawa, Akimasa

2018-02-01

Understanding of underlying mechanisms of drastic variations of the near-Earth space (geospace) is one of the current focuses of the magnetospheric physics. The science target of the geospace research project Exploration of energization and Radiation in Geospace (ERG) is to understand the geospace variations with a focus on the relativistic electron acceleration and loss processes. In order to achieve the goal, the ERG project consists of the three parts: the Arase (ERG) satellite, ground-based observations, and theory/modeling/integrated studies. The role of theory/modeling/integrated studies part is to promote relevant theoretical and simulation studies as well as integrated data analysis to combine different kinds of observations and modeling. Here we provide technical reports on simulation and empirical models related to the ERG project together with their roles in the integrated studies of dynamic geospace variations. The simulation and empirical models covered include the radial diffusion model of the radiation belt electrons, GEMSIS-RB and RBW models, CIMI model with global MHD simulation REPPU, GEMSIS-RC model, plasmasphere thermosphere model, self-consistent wave-particle interaction simulations (electron hybrid code and ion hybrid code), the ionospheric electric potential (GEMSIS-POT) model, and SuperDARN electric field models with data assimilation. ERG (Arase) science center tools to support integrated studies with various kinds of data are also briefly introduced.[Figure not available: see fulltext.

Integration of thermo-vapor compressor with multiple-effect evaporator

International Nuclear Information System (INIS)

Sharan, Prashant; Bandyopadhyay, Santanu

2016-01-01

Highlights: • Energy integration of thermo-vapor compressor with multiple-effect evaporator. • Proposed a new methodology for optimal placement of thermo-vapor compressor. • Extended Pinch Analysis for overall energy conservation. • Obtained simultaneous reduction in evaporator area requirement and energy consumption with optimal integration. - Abstract: Thermo-vapor compressor (TVC) is used for compressing the low-pressure vapor with the help of the high-pressure motive steam, to produce the medium pressure vapor. A substantial portion of energy may be conserved by integrating TVC with the multiple-effect evaporator (MEE). The common practice in desalination industry is to compress the vapor produced in the last effect of a MEE using TVC to reduce the overall motive steam requirement. Such integration does not necessarily guarantee energy optimality. The objective of the present work is to optimally integrate TVC with a MEE system to maximize the gain output ratio (GOR). GOR is defined as the ratio of the mass flow rate of vapor produced in MEE to the mass flow rate of the motive steam supplied to TVC. GOR is the measure of the energy efficiency of MEE system. Using the principles of Pinch Analysis and techniques of mathematical optimization, a new methodology for integration of TVC with MEE is proposed in this paper. This is the first analytical methodology to optimally integrate TVC with MEE, avoiding multiple simulations of the overall system. A Theorem is proposed to directly calculate the optimal location of TVC suction position. The proposed methodology gives the designer the freedom to design an MEE-TVC with minimum energy consumption and without carrying out the detailed simulation of the entire system. The methodology is demonstrated through the illustrative case studies for concentrating corn glucose, and freshwater production through thermal desalination. In the case of corn glucose, the optimal integration of TVC with 2-effect MEE resulted in

Integrating Curriculum: A Case Study of Teaching Global Education

Science.gov (United States)

Ferguson-Patrick, Kate; Reynolds, Ruth; Macqueen, Suzanne

2018-01-01

Despite widespread support for integrated approaches to teaching, classroom practice reveals a lack of implementation. This paper explores challenges and opportunities in teaching an integrated curriculum, and connects this with the contemporary notion of a twenty-first century curriculum and pedagogy. A case study of Global Education (GE) is used…

34 CFR 656.5 - What activities may be carried out?

Science.gov (United States)

2010-07-01

... EDUCATION, DEPARTMENT OF EDUCATION NATIONAL RESOURCE CENTERS PROGRAM FOR FOREIGN LANGUAGE AND AREA STUDIES OR FOREIGN LANGUAGE AND INTERNATIONAL STUDIES General § 656.5 What activities may be carried out? (a... following purposes: (1) Linkage or outreach between foreign language, area studies, and other international...

Study to integrate NURE data

International Nuclear Information System (INIS)

Golabi, K.; Lamont, A.

1978-09-01

Objective of this study is to develop a framework for integrating the NURE information into a measure of uranium favorability for a given geological area or to estimate the amount of U ore contained within a sandstone formation. Parameters describing the geologic history and structure of a potential sandstone host formation are used as input variables to a material balance model of U flow. Radiometric and hydrogeochemical information are combined with the geologic studies to achieve better estimates of U resources. The method is applied to the Shirley Basin and Gas Hills mining districts in Wyoming; the estimates are expressed as probability distributions. 22 figures, 3 tables

Coal Integrated Gasification Fuel Cell System Study

Energy Technology Data Exchange (ETDEWEB)

Chellappa Balan; Debashis Dey; Sukru-Alper Eker; Max Peter; Pavel Sokolov; Greg Wotzak

2004-01-31

This study analyzes the performance and economics of power generation systems based on Solid Oxide Fuel Cell (SOFC) technology and fueled by gasified coal. System concepts that integrate a coal gasifier with a SOFC, a gas turbine, and a steam turbine were developed and analyzed for plant sizes in excess of 200 MW. Two alternative integration configurations were selected with projected system efficiency of over 53% on a HHV basis, or about 10 percentage points higher than that of the state-of-the-art Integrated Gasification Combined Cycle (IGCC) systems. The initial cost of both selected configurations was found to be comparable with the IGCC system costs at approximately $1700/kW. An absorption-based CO2 isolation scheme was developed, and its penalty on the system performance and cost was estimated to be less approximately 2.7% and $370/kW. Technology gaps and required engineering development efforts were identified and evaluated.

A study to compute integrated dpa for neutron and ion irradiation environments using SRIM-2013

Science.gov (United States)

Saha, Uttiyoarnab; Devan, K.; Ganesan, S.

2018-05-01

Displacements per atom (dpa), estimated based on the standard Norgett-Robinson-Torrens (NRT) model, is used for assessing radiation damage effects in fast reactor materials. A computer code CRaD has been indigenously developed towards establishing the infrastructure to perform improved radiation damage studies in Indian fast reactors. We propose a method for computing multigroup neutron NRT dpa cross sections based on SRIM-2013 simulations. In this method, for each neutron group, the recoil or primary knock-on atom (PKA) spectrum and its average energy are first estimated with CRaD code from ENDF/B-VII.1. This average PKA energy forms the input for SRIM simulation, wherein the recoil atom is taken as the incoming ion on the target. The NRT-dpa cross section of iron computed with "Quick" Kinchin-Pease (K-P) option of SRIM-2013 is found to agree within 10% with the standard NRT-dpa values, if damage energy from SRIM simulation is used. SRIM-2013 NRT-dpa cross sections applied to estimate the integrated dpa for Fe, Cr and Ni are in good agreement with established computer codes and data. A similar study carried out for polyatomic material, SiC, shows encouraging results. In this case, it is observed that the NRT approach with average lattice displacement energy of 25 eV coupled with the damage energies from the K-P option of SRIM-2013 gives reliable displacement cross sections and integrated dpa for various reactor spectra. The source term of neutron damage can be equivalently determined in the units of dpa by simulating self-ion bombardment. This shows that the information of primary recoils obtained from CRaD can be reliably applied to estimate the integrated dpa and damage assessment studies in accelerator-based self-ion irradiation experiments of structural materials. This study would help to advance the investigation of possible correlations between the damages induced by ions and reactor neutrons.

Do Weapons Facilitate Adolescent Delinquency? An Examination of Weapon Carrying and Delinquency Among Adolescents.

Science.gov (United States)

Emmert, Amanda D; Hall, Gina Penly; Lizotte, Alan J

2018-03-01

This article examines whether weapon carrying influences the frequency and variety of violent, property, and drug delinquency adolescents commit through fixed-effects analyses of data from the Rochester Youth Development Study (RYDS). We conclude that weapon carrying contributes to violent, substance, and property delinquency, and delinquent behaviors learned during weapon carrying continue to affect substance and property delinquency long after carrying has ceased.

Study of rational energy consumption in electric appliances. An integrated approach; Estudio de racionalizacion del consumo energetico en electrodomesticos. Un enfoque integrador

Energy Technology Data Exchange (ETDEWEB)

Massa, Pablo A.; Romero Tirado, Rene R. [La Plata Univ. Nacional (Argentina). Facultad de Ingenieria. Dept. de Electrotecnia

1997-12-31

This work presents a global and integrated approach about rational energy consumption concerning the use of electric appliances based on studies carried out in this investigation and information obtained through a joint action of government agents and electric power manufacturers, producers and distributors. It also presents a program named `procaeh`(home electric appliances quality program) in the scope of the communications and energy bureau and energy rational use (URE) management 8 refs., 2 figs., 7 tabs.; e-mail: massa at isis.unlp.edu.ar

46 CFR 111.105-35 - Vessels carrying coal.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Vessels carrying coal. 111.105-35 Section 111.105-35...-GENERAL REQUIREMENTS Hazardous Locations § 111.105-35 Vessels carrying coal. (a) The following are Class II, Division 1, (Zone 10 or Z) locations on a vessel that carries coal: (1) The interior of each coal...

Residents’ perceptions of an integrated longitudinal curriculum: a qualitative study

Directory of Open Access Journals (Sweden)

Rebecca Lubitz

2015-12-01

Conclusions: This study suggests that an integrated longitudinalized family medicine block training model has the potential to support the principles of a longitudinal integrated competency-based curriculum to effectively prepare residents for family medicine practice.

GIS and agent based spatial-temporal simulation modeling for assessing tourism social carrying capacity: a study on Mount Emei scenic area, China

Science.gov (United States)

Zhang, Renjun

2007-06-01

Each scenic area can sustain a specific level of acceptance of tourist development and use, beyond which further development can result in socio-cultural deterioration or a decline in the quality of the experience gained by visitors. This specific level is called carrying capacity. Social carrying capacity can be defined as the maximum level of use (in terms of numbers and activities) that can be absorbed by an area without an unacceptable decline in the quality of experience of visitors and without an unacceptable adverse impact on the society of the area. It is difficult to assess the carrying capacity, because the carrying capacity is determined by not only the number of visitors, but also the time, the type of the recreation, the characters of each individual and the physical environment. The objective of this study is to build a spatial-temporal simulation model to simulate the spatial-temporal distribution of tourists. This model is a tourist spatial behaviors simulator (TSBS). Based on TSBS, the changes of each visitor's travel patterns such as location, cost, and other states data are recoded in a state table. By analyzing this table, the intensity of the tourist use in any area can be calculated; the changes of the quality of tourism experience can be quantized and analyzed. So based on this micro simulation method the social carrying capacity can be assessed more accurately, can be monitored proactively and managed adaptively. In this paper, the carrying capacity of Mount Emei scenic area is analyzed as followed: The author selected the intensity of the crowd as the monitoring Indicators. it is regarded that longer waiting time means more crowded. TSBS was used to simulate the spatial-temporal distribution of tourists. the average of waiting time all the visitors is calculated. And then the author assessed the social carrying capacity of Mount Emei scenic area, found the key factors have impacted on social carrying capacity. The results show that the TSBS

A high-resolution programmable Vernier delay generator based on carry chains in FPGA.

Science.gov (United States)

Cui, Ke; Li, Xiangyu; Zhu, Rihong

2017-06-01

This paper presents an architecture of a high-resolution delay generator implemented in a single field programmable gate array chip by exploiting the method of utilizing dedicated carry chains. It serves as the core component in various physical instruments. The proposed delay generator contains the coarse delay step and the fine delay step to guarantee both large dynamic range and high resolution. The carry chains are organized in the Vernier delay loop style to fulfill the fine delay step with high precision and high linearity. The delay generator was implemented in the EP3SE110F1152I3 Stratix III device from Altera on a self-designed test board. Test results show that the obtained resolution is 38.6 ps, and the differential nonlinearity/integral nonlinearity is in the range of [-0.18 least significant bit (LSB), 0.24 LSB]/(-0.02 LSB, 0.01 LSB) under the nominal supply voltage of 1100 mV and environmental temperature of 20  ° C. The delay generator is rather efficient concerning resource cost, which uses only 668 look-up tables and 146 registers in total.

A high-resolution programmable Vernier delay generator based on carry chains in FPGA

Science.gov (United States)

Cui, Ke; Li, Xiangyu; Zhu, Rihong

2017-06-01

This paper presents an architecture of a high-resolution delay generator implemented in a single field programmable gate array chip by exploiting the method of utilizing dedicated carry chains. It serves as the core component in various physical instruments. The proposed delay generator contains the coarse delay step and the fine delay step to guarantee both large dynamic range and high resolution. The carry chains are organized in the Vernier delay loop style to fulfill the fine delay step with high precision and high linearity. The delay generator was implemented in the EP3SE110F1152I3 Stratix III device from Altera on a self-designed test board. Test results show that the obtained resolution is 38.6 ps, and the differential nonlinearity/integral nonlinearity is in the range of [-0.18 least significant bit (LSB), 0.24 LSB]/(-0.02 LSB, 0.01 LSB) under the nominal supply voltage of 1100 mV and environmental temperature of 2 0°C. The delay generator is rather efficient concerning resource cost, which uses only 668 look-up tables and 146 registers in total.

Impact of Flexibility Options on Grid Economic Carrying Capacity of Solar and Wind: Three Case Studies

Energy Technology Data Exchange (ETDEWEB)

Denholm, Paul [National Renewable Energy Lab. (NREL), Golden, CO (United States); Novacheck, Joshua [National Renewable Energy Lab. (NREL), Golden, CO (United States); Jorgenson, Jennie [National Renewable Energy Lab. (NREL), Golden, CO (United States); O' Connell, Matthew [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2016-12-01

In this study, we attempt to quantify the benefits of various options of grid flexibility by measuring their impact on two measures: economic carrying capacity and system costs. Flexibility can increase ECC and reduce overall system costs. In some cases, options that provide a limited increase in ECC can provide significant operational savings, thus demonstrating the need to evaluate flexibility options using multiple metrics. The value of flexibility options varies regionally due to different generation mixes and types of renewables. The more rapid decline in PV value compared to wind makes PV more dependent on adding flexibility options, including transmission and energy storage.

Method for rendering harmless sulfur dioxide-carrying gases and sulfur-carrying waste water from pyrolysis of oil shale

Energy Technology Data Exchange (ETDEWEB)

Aspegren, O E.A.; Eklund, A J

1951-03-15

A method is described for rendering harmless sulfur dioxide-carrying gases, which are formed in processes for the manufacture of solid, liquid, or gaseous products by pyrolysis of oil shale, and thereby to extract valuable products, characterized in that the sulfur dioxide-carrying gases are washed with a solution or sludge obtained by leaching wholly or partly burned-out residues from the pyrolysis.

Trials carried out on corrosive (fluorinated) atmosphere vacuum gauges

International Nuclear Information System (INIS)

Constant, M.; Houyvet, A.; Noe, P.

1966-01-01

Study of the stability of readings given by a modified Pirani type measurement probe with a view to long term operation in the presence of corrosive gases. Results of measurements carried out before and after use under these conditions. (author) [fr

Study on the carry capacity of edible jellyfish fishery in Liaodong Bay

Science.gov (United States)

You, Kui; Bian, Yongning; Ma, Caihua; Chi, Xupeng; Liu, Zhiqiang; Zhang, Yuyu

2016-06-01

Jellyfish fishing is a special type of fishery that mainly exists in some countries of East and Southeast Asia. China has the largest jellyfish fishery yield in the world with an annual harvest of around 300 thousand tons. Liaodong Bay is the most important jellyfish fishery ground in China. However, due to the high benefits of jellyfish fishery, which leads to illegal and out-of-season jellyfish fishing occurring each year in Liaodong Bay. Illegal jellyfish fishery in Liaodong Bay is a typical example of the tragedy of the commons. The key problem is that fishermen seek to an illegally initiate jellyfish fishing as early as possible. In this paper, basing on the data of edible jellyfish's biology and ecology, we mainly analyzed the history of jellyfish fishery in China, especially in Liaodong bay, and then we calculated the carry capacity of edible jellyfish in Liaodong Bay which is about 300 thousand tons one year. This number is equal to the recent annual yield of edible jellyfish in China. Furthermore, basing on the carry capacity and reasonable quotas price analysis, we set up a Jellyfish fishing quotas and deficit quotas buyback system which could be a suitable and effective solution for jellyfish fishery management and development in Liaodong Bay at the underlying roots. Although China is the first country with edible jellyfish aquaculture, the annual yield of jellyfish aquaculture is only one fifth of jellyfish fishing. So, there is a very bright developing prospect about edible jellyfish aquaculture in China.

Review of the integrated thermal and nonthermal treatment system studies. Final report

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-10-01

This report contains a review and evaluation of three systems analysis studies performed by LITCO on integrated thermal treatment systems and integrated nonthermal treatment systems for the remediation of mixed low-level waste stored throughout the US Department of Energy weapons complex. The review was performed by an independent team of nine researchers from the Energy and Environmental Research Center, Science Applications International Corporation, the Waste Policy Institute, and Virginia Tech. The three studies reviewed were as follows: Integrated Thermal Treatment System Study, Phase 1 -- issued July 1994; Integrated Thermal Treatment System Study, Phase 2 -- issued February 1996; and Integrated Nonthermal Treatment System Study -- drafted March 1996. The purpose of this review was to (1) determine whether the assumptions of the studies were adequate to produce an unbiased review of both thermal and nonthermal systems, (2) to identify the critical areas of the studies that would benefit from further investigation, and (3) to develop a standard template that could be used in future studies to assure a sound application of systems engineering.

Review of the integrated thermal and nonthermal treatment system studies. Topical Report

International Nuclear Information System (INIS)

Durrani, H.A.; Schmidt, L.J.; Erickson, T.A.; Sondreal, E.A.; Erjavec, J.; Steadman, E.N.; Fabrycky, W.J.; Wilson, J.S.; Musich, M.A.

1996-07-01

This report analyzes three systems engineering (SE) studies performed on integrated thermal treatment systems (ITTSs) and integrated nonthermal treatment systems (INTSs) for the remediation of mixed low-level waste (MLLW) stored throughout the US Department of Energy (DOE) weapons complex. The review was performed by an independent team of nine researchers from the Energy and Environmental Research Center (EERC), Science Applications International Corporation (SAIC), the Waste Policy Institute (WPI), and Virginia Tech (VT). The three studies reviewed were as follows: Integrated Thermal Treatment System Study, Phase 1--issued July 1994; Integrated Thermal Treatment System Study, Phase 2--issued February 1996; and Integrated Nonthermal Treatment System Study--drafted March 1996. The purpose of this review was to (1) determine whether the assumptions taken in the studies might bias the resulting economic evaluations of both thermal and nonthermal systems, (2) identify the critical areas of the studies that would benefit from further investigation, and (3) develop a standard template that could be used in future studies to produce sound SE applications

Review of the integrated thermal and nonthermal treatment system studies. Final report

International Nuclear Information System (INIS)

1996-10-01

This report contains a review and evaluation of three systems analysis studies performed by LITCO on integrated thermal treatment systems and integrated nonthermal treatment systems for the remediation of mixed low-level waste stored throughout the US Department of Energy weapons complex. The review was performed by an independent team of nine researchers from the Energy and Environmental Research Center, Science Applications International Corporation, the Waste Policy Institute, and Virginia Tech. The three studies reviewed were as follows: Integrated Thermal Treatment System Study, Phase 1 -- issued July 1994; Integrated Thermal Treatment System Study, Phase 2 -- issued February 1996; and Integrated Nonthermal Treatment System Study -- drafted March 1996. The purpose of this review was to (1) determine whether the assumptions of the studies were adequate to produce an unbiased review of both thermal and nonthermal systems, (2) to identify the critical areas of the studies that would benefit from further investigation, and (3) to develop a standard template that could be used in future studies to assure a sound application of systems engineering

Integrating postgraduate and undergraduate general practice education: qualitative study.

Science.gov (United States)

O'Regan, Andrew; Culhane, Aidan; Dunne, Colum; Griffin, Michael; McGrath, Deirdre; Meagher, David; O'Dwyer, Pat; Cullen, Walter

2013-05-01

Educational activity in general practice has increased considerably in the past 20 years. Vertical integration, whereby practices support students and trainees at different stages, may enhance general practices' capacity to fulfil this role. To explore the potential for vertical integration in undergraduate and postgraduate education in general practice, by describing the experience of (and attitudes towards) 'vertical integration in general practice education' among key stakeholder groups. Qualitative study of GPs, practice staff, GPs-in-training and medical students involving focus groups which were thematically analysed. We identified four overarching themes: (1) Important practical features of vertical integration are interaction between learners at different stages, active involvement in clinical teams and interagency collaboration; (2) Vertical integration may benefit GPs/practices, students and patients through improved practice systems, exposure to team-working and multi-morbidity and opportunistic health promotion, respectively; (3) Capacity issues may challenge its implementation; (4) Strategies such as recognising and addressing diverse learner needs and inter-agency collaboration can promote vertical integration. Vertical integration, whereby practices support students and trainees at different stages, may enhance general practices' teaching capacity. Recognising the diverse educational needs of learners at different stages and collaboration between agencies responsible for the planning and delivery of specialist training and medical degree programmes would appear to be important.

IWRM Policy in Colombia, drawbacks and strategies towards integration

Science.gov (United States)

Cardona, C. A.

2016-12-01

Since the establishment of the Integrated Water Resource Management National Policy in Colombia in 2010- IWRMNP, several initiatives has been developed in order to understand and manage water within the integration perspective. However, the Colombian institutional and legal frameworks do not favor the implementation of integrated management exercises, and many efforts have been fruitless in recent years. Additionally, there is an avalanche of techniques and available technologies to develop integrated models, analysis or assessments, which frequently are interpreted as the same tool. An analysis of the Colombian context in regulatory terms and institutions involved is carried out, as a prelude to address the topic of analysis modeling and integrated management. Moreover, in Colombian legislation there exists policies regarding integrated soil management, integrated biodiversity management, as well as several current international trends such as integrated landscape planning, integrated urban areas management etc. Therefore, and in light of the initial analysis, a discussion of redundancy or complementarity of such management it is carried out. Finally, a strategy is proposed for decision makers of local and regional level, trying to overcome technical gaps left by national policy and regulations. This is done from a discussion of the various anthropic damages to water resources systems. Also a classification of integrated models is proposed and a general approach to systems integrated resource management to finally present a state- management matrix methodology applicable to different cases and management requirements. The results of its implementation in a small basin is presented.

Abstraction carrying code and resource-awareness

OpenAIRE

Hermenegildo, Manuel V.; Albert Albiol, Elvira; López García, Pedro; Puebla Sánchez, Alvaro Germán

2005-01-01

Proof-Carrying Code (PCC) is a general approach to mobile code safety in which the code supplier augments the program with a certifícate (or proof). The intended benefit is that the program consumer can locally validate the certifícate w.r.t. the "untrusted" program by means of a certifícate checker—a process which should be much simpler, eíñcient, and automatic than generating the original proof. Abstraction Carrying Code (ACC) is an enabling technology for PCC in which an abstract mod...

A Case Study for Business Integration as a Service

OpenAIRE

Chang, Victor

2013-01-01

This paper presents Business Integration as a Service (BIaaS) to allow two services to work together in the Cloud to achieve a streamline process. We illustrate this integration using two services; Return on Investment (ROI) Measurement as a Service (RMaaS) and Risk Analysis as a Service (RAaaS) in the case study at the University of Southampton. The case study demonstrates the cost-savings and the risk analysis achieved, so two services can work as a single service. Advanced techniques are u...

Integrated planning of laboratory, in-situ, modelling and natural analogue studies in the Swiss radioactive waste management programme

International Nuclear Information System (INIS)

McKinley, I.G.; Zuidema, P.

2001-01-01

After more than 25 years of development, the Swiss radioactive waste management programme has a well established disposal strategy supported by an integrated R and D infrastructure. The process of implementation of repository projects is constrained by political factors, but a dynamic R and D programme is strongly guided by periodic integrated performance assessments and includes: Experimental studies in conventional and ''hot'' laboratories; Projects in underground test facilities and field test sites; Model development verification and validation; Natural and archaeological analogue projects. R and D in the Swiss national programme focuses on filling remaining gaps in system understanding, enhancing confidence via validation and demonstration projects, system optimisation and maintaining state of the art technical capacity in key areas. Increasingly, such work is carried out in collaboration with partner national waste management organisations. In addition, The National Cooperative for the Disposal of Radioactive Waste (Nagra) provides support services to developing programmes - which allows Nagra to widen its range of experience while providing attractive access to a knowledge base accumulated at a cost of over 750 M CHF. (author)

Study on constructing retroviral vector carrying HSV-tk gene and its antitumor effect in vitro

International Nuclear Information System (INIS)

Pan Yujun; Hui Guozhen; Hu Jin

1997-01-01

The author reports the construction of retroviral vector PLNTK carrying HsV-tk gene driven by pgk promoter and the successful transferring into cells NBA 2 and SHG 44 respectively as shown by PCR. In vitro study, HSV-tk-expressed-cells prove to be more sensitive to ACV than parent cells. The sensitivity of SHGLNTK and NBALNTK to ACV is 1000 and 500 times that of their parent cells respectively. 3 H-TdR test demonstrated that the DNA replication in gene modified cells is more suppressed than that of parent cells when treated with ACV. Moreover, the ACV sensitivity level of parent cells is enhanced when co-cultured with gene modified cells, which suggests the existence of the bystander effect

Integrated approach for prioritizing watersheds for management: a study of lidder catchment of kashmir himalayas.

Science.gov (United States)

Malik, Mohammad Imran; Bhat, M Sultan

2014-12-01

The Himalayan watersheds are susceptible to various forms of degradation due to their sensitive and fragile ecological disposition coupled with increasing anthropogenic disturbances. Owing to the paucity of appropriate technology and financial resources, the prioritization of watersheds has become an inevitable process for effective planning and management of natural resources. Lidder catchment constitutes a segment of the western Himalayas with an area of 1,159.38 km(2). The study is based on integrated analysis of remote sensing, geographic information system, field study, and socioeconomic data. Multicriteria evaluation of geophysical, land-use and land-cover (LULC) change, and socioeconomic indicators is carried out to prioritize watersheds for natural resource conservation and management. Knowledge-based weights and ranks are normalized, and weighted linear combination technique is adopted to determine final priority value. The watersheds are classified into four priority zones (very high priority, high priority, medium priority, and low priority) on the basis of quartiles of the priority value, thus indicating their ecological status in terms of degradation caused by anthropogenic disturbances. The correlation between priority ranks of individual indicators and integrated indicators is drawn. The results reveal that socioeconomic indicators are the most important drivers of LULC change and environmental degradation in the catchment. Moreover, the magnitude and intensity of anthropogenic impact is not uniform in different watersheds of Lidder catchment. Therefore, any conservation and management strategy must be formulated on the basis of watershed prioritization.

Case study: Preliminary assessment of integrated palm biomass biorefinery for bioethanol production utilizing non-food sugars from oil palm frond petiole

International Nuclear Information System (INIS)

Abdullah, Sharifah Soplah Syed; Shirai, Yoshihito; Ali, Ahmad Amiruddin Mohd; Mustapha, Mahfuzah; Hassan, Mohd Ali

2016-01-01

Highlights: • Fermentable sugars production from oil palm frond by integrated technology concept. • Bioethanol production from oil palm frond sugars in a biorefinery. • Palm oil mills have sufficient excess energy and steam to support biorefinery. • The net energy ratio of bioethanol from oil palm frond petiole is 7.48. - Abstract: In this case study, a preliminary assessment on the bioethanol production from oil palm frond (OPF) petiole sugars within an integrated palm biomass biorefinery was carried out. Based on the case study of 4 neighbouring palm oil mills, approximately 55,600 t/y of fermentable sugars could be obtained from OPF petiole. The integrated biorefinery will be located at one of the 4 mills. The mill has potential excess energy comprising 3.64 GW h/y of electricity and 177,000 t/y of steam which are sufficient to run the biorefinery. With 33.9 million litres/y of bioethanol production, the specific production cost of bioethanol is estimated at $ 0.52/l bioethanol, compared to $ 0.31–0.34/l bioethanol produced from sugarcane and $ 0.49–0.60/l bioethanol from other lignocellulosics. The net energy ratio of 7.48 for bioethanol production from OPF provides a promising alternative for OPF utilization as a non-food sugar feedstock.

Academic and social integration and study progress in problem based learning

NARCIS (Netherlands)

S.E. Severiens (Sabine); H.G. Schmidt (Henk)

2009-01-01

textabstractThe present study explores the effects of problem-based learning (PBL) on social and academic integration and study progress. Three hundred and five first-year students from three different psychology curricula completed a questionnaire on social and academic integration. Effects of a

Carbon Market and Integrated Waste Solutions : a Case Study of ...

International Development Research Centre (IDRC) Digital Library (Canada)

Carbon Market and Integrated Waste Solutions : a Case Study of Indonesia ... dual purpose of helping developing countries achieve sustainable development ... with a view to devising integrated waste management solutions in urban centres ... and disseminate them through national, regional and international networks.

14 CFR 121.589 - Carry-on baggage.

Science.gov (United States)

2010-01-01

... (c) and (d). (c) No certificate holder may allow an airplane to take off or land unless each article... holder may allow the boarding of carry-on baggage on an airplane unless each passenger's baggage has been... program in its operations specifications. In addition, no passenger may board an airplane if his/her carry...

Resolution enhancement in integral microscopy by physical interpolation.

Science.gov (United States)

Llavador, Anabel; Sánchez-Ortiga, Emilio; Barreiro, Juan Carlos; Saavedra, Genaro; Martínez-Corral, Manuel

2015-08-01

Integral-imaging technology has demonstrated its capability for computing depth images from the microimages recorded after a single shot. This capability has been shown in macroscopic imaging and also in microscopy. Despite the possibility of refocusing different planes from one snap-shot is crucial for the study of some biological processes, the main drawback in integral imaging is the substantial reduction of the spatial resolution. In this contribution we report a technique, which permits to increase the two-dimensional spatial resolution of the computed depth images in integral microscopy by a factor of √2. This is made by a double-shot approach, carried out by means of a rotating glass plate, which shifts the microimages in the sensor plane. We experimentally validate the resolution enhancement as well as we show the benefit of applying the technique to biological specimens.

Long-term psychological impact of carrying a BRCA1/2 mutation and prophylactic surgery: a 5-year follow-up study

NARCIS (Netherlands)

van Oostrom, Iris; Meijers-Heijboer, Hanne; Lodder, Litanja N.; Duivenvoorden, Hugo J.; van Gool, Arthur R.; Seynaeve, Caroline; van der Meer, Conny A.; Klijn, Jan G. M.; van Geel, Bert N.; Burger, Curt W.; Wladimiroff, Juriy W.; Tibben, Aad

2003-01-01

To explore long-term psychosocial consequences of carrying a BRCA1/2 mutation and to identify possible risk factors for long-term psychological distress. Five years after genetic test disclosure, 65 female participants (23 carriers, 42 noncarriers) of our psychological follow-up study completed a

Predicting older adults' maintenance in exercise participation using an integrated social psychological model

NARCIS (Netherlands)

Stiggelbout, M.; Hopman-Rock, M.; Crone, M.; Lechner, L.; Mechelen, W. van

2006-01-01

Little is known about the predictors of maintenance in organized exercise programmes. The aim of this study was to investigate the behavioral predictors of maintenance of exercise participation in older adults, using an integrated social psychological model. To this end, we carried out a prospective

Hotspot relaxation dynamics in a current-carrying superconductor

Science.gov (United States)

Marsili, F.; Stevens, M. J.; Kozorezov, A.; Verma, V. B.; Lambert, Colin; Stern, J. A.; Horansky, R. D.; Dyer, S.; Duff, S.; Pappas, D. P.; Lita, A. E.; Shaw, M. D.; Mirin, R. P.; Nam, S. W.

2016-03-01

We experimentally studied the dynamics of optically excited hotspots in current-carrying WSi superconducting nanowires as a function of bias current, bath temperature, and excitation wavelength. We observed that the hotspot relaxation time depends on bias current, temperature, and wavelength. We explained this effect with a model based on quasiparticle recombination, which provides insight into the quasiparticle dynamics of superconductors.

Terapia antibiótica para el manejo de la bartonelosis o enfermedad de Carrión en eL Perú

OpenAIRE

Tarazona F, Augusto; Maguiña V, Ciro; López de Guimaraes, Douglas; Montoya L, Manuel; Pachas C, Paul

2006-01-01

La enfermedad de Carrión es una infección metaxénica endémica del Perú causada por la Bartonella bacilliformis, el Ministerio de Salud ha elaborado recientemente la norma técnica para que sea aplicada en todo establecimiento de salud para contribuir a la atención integral de la Bartonelosis o enfermedad de Carrión mediante la estandarización del diagnóstico, manejo clínico y esquemas terapéuticos, de acuerdo con las actuales evidencias científicas disponibles, incorporando la experiencia médi...

Torsional Vibrations of a Conic Shaft with Opposite Tapers Carrying Arbitrary Concentrated Elements

Directory of Open Access Journals (Sweden)

Jia-Jang Wu

2013-01-01

Full Text Available The purpose of this paper is to present the exact solution for free torsional vibrations of a linearly tapered circular shaft carrying a number of concentrated elements. First of all, the equation of motion for free torsional vibration of a conic shaft is transformed into a Bessel equation, and, based on which, the exact displacement function in terms of Bessel functions is obtained. Next, the equations for compatibility of deformations and equilibrium of torsional moments at each attaching point (including the shaft ends between the concentrated elements and the conic shaft with positive and negative tapers are derived. From the last equations, a characteristic equation of the form is obtained. Then, the natural frequencies of the torsional shaft are determined from the determinant equation , and, corresponding to each natural frequency, the column vector for the integration constants, , is obtained from the equation . Substitution of the last integration constants into the associated displacement functions gives the corresponding mode shape of the entire conic shaft. To confirm the reliability of the presented theory, all numerical results obtained from the exact method are compared with those obtained from the conventional finite element method (FEM and good agreement is achieved.

Investigation of thermal integration between biogas production and upgrading

International Nuclear Information System (INIS)

Zhang, Xiaojing; Yan, Jinying; Li, Hailong; Chekani, Shabnam; Liu, Loncheng

2015-01-01

Highlights: • Identify thermal characteristics of amine-based biogas upgrading for waste heat recovery. • Identify thermal characteristics of AD biogas production as sink for heat recovery. • Evaluation of thermal integration between biogas production and upgrading to improve overall energy efficiency. • Cost analysis applied for the economic feasibility of the thermal integration. • Using the principles of target design and system integration for connected thermal processes. - Abstract: Thermal integration of anaerobic digestion (AD) biogas production with amine-based chemical absorption biogas upgrading has been studied to improve the overall efficiency of the intergraded system. The thermal characteristics have been investigated for industrial AD raw biogas production and amine-based chemical absorption biogas upgrading. The investigation provides a basic understanding for the possibilities of energy saving through thermal integration. The thermal integration is carried out through well-defined cases based on the thermal characteristics of the biogas production and the biogas upgrading. The following factors are taken into account in the case study: thermal conditions of sub-systems, material and energy balances, cost issues and main benefits. The potential of heat recovery has been evaluated to utilise the waste heat from amine-based upgrading process for the use in the AD biogas production. The results show that the thermal integration has positive effects on improving the overall energy efficiency of the integrated biogas plant. Cost analysis shows that the thermal integration is economically feasible

Carrying capacity of Peucang Island for ecotourism management in Ujung Kulon National Park

Science.gov (United States)

Wiyono, K. H.; Muntasib, E. K. S. H.; Yulianda, F.

2018-05-01

Peucang Island is one of island in Ujung Kulon National Park (UKNP), appointed as priority area and welcome area for tourism. This research aimed to calculate the carrying capacity of Peucang Island for ecotourism development (Study sites of this research are Karang Copong jungle trail and 8 sites of Peucangs beach). This research used observation method (wildlife exploration, measure the lenght of jungle track, and measure 10 parameters of beach), literature study and and interview method to collect data. The data of jungle track analyzed use Cifuentes’s formula. The result showed that Karang Copong jungle trekking had 20,000 visitors/day for Physical Carrying Capacity (PCC), 4 838 visitors/day for Real Carrying Capacity (RCC), and 6 visitors/day for Efective Carrying Capacity (ECC). Observation of biological aspect showed that there were some damages of vegetation along the track, and the changes in animal behavior. The data of beach carrying capacity analyzed use Yulianda’s formula that measured with the suitability map approach. Based on the suitability map, two beaches were classified in suitable category, while six beaches) were classified in highly suitable category for tourism activities. All of the beaches had different number of carrying capacity, specifically there are 70 visitors/day in highly suitable beach and 27 visitors/day in suitable beach. The number of visitor nowadays still not exceed from carrying capacity number of PCC, RCC of jungle trails and carrying capacity of the beach area, but the number has exceeded from the ECC numbers.

Overview of the New England wind integration. Study and selected results

Energy Technology Data Exchange (ETDEWEB)

Norden, John R.; Henson, William L.W. [ISO New England, Holyoke, MA (United States)

2010-07-01

ISO New England commissioned a comprehensive wind integration study to be completed in the early fall of 2010: the New England Wind Integration Study (NEWIS). The NEWIS assesses the efects of scenarios that encompass a range of wind-power penetrations in New England using statistical and simulation analysis including the development of a mesoscale wind-to-power model for the New England and Maritime wind resources areas. It also determines the impacts of integrating increasing amounts of wind generation resources for New England, as well as, the measures that may be available to the ISO for responding to any challenges while enabling the integration of wind-power. This paper provides an overview of the study then focuses on selected near final results, particularly with regard to the varying capacity factor, capacity value and siting that were determined as part of the study. The full results of the NEWIS will be released in the fall of 2010. (orig.)

Integrated, multidisciplinary care for hand eczema: design of a randomized controlled trial and cost-effectiveness study

Directory of Open Access Journals (Sweden)

Boot Cécile RL

2009-12-01

Full Text Available Abstract Background The individual and societal burden of hand eczema is high. Literature indicates that moderate to severe hand eczema is a disease with a poor prognosis. Many patients are hampered in their daily activities, including work. High costs are related to high medical consumption, productivity loss and sick leave. Usual care is suboptimal, due to a lack of optimal instruction and coordination of care, and communication with the general practitioner/occupational physician and people involved at the workplace. Therefore, an integrated, multidisciplinary intervention involving a dermatologist, a care manager, a specialized nurse and a clinical occupational physician was developed. This paper describes the design of a study to investigate the effectiveness and cost-effectiveness of integrated care for hand eczema by a multidisciplinary team, coordinated by a care manager, consisting of instruction on avoiding relevant contact factors, both in the occupational and in the private environment, optimal skin care and treatment, compared to usual, dermatologist-led care. Methods The study is a multicentre, randomized, controlled trial with an economic evaluation alongside. The study population consists of patients with chronic, moderate to severe hand eczema, who visit an outpatient clinic of one of the participating 5 (three university and two general hospitals. Integrated, multidisciplinary care, coordinated by a care manager, including allergo-dermatological evaluation by a dermatologist, occupational intervention by a clinical occupational physician, and counselling by a specialized nurse on optimizing topical treatment and skin care will be compared with usual care by a dermatologist. The primary outcome measure is the cumulative difference in reduction of the clinical severity score HECSI between the groups. Secondary outcome measures are the patient's global assessment, specific quality of life with regard to the hands, generic quality

Generalizability of carry-over effects in the emotional Stroop task.

Science.gov (United States)

Waters, Andrew J; Sayette, Michael A; Franken, Ingmar H A; Schwartz, Joseph E

2005-06-01

The emotional Stroop task has been the most widely used task to examine attentional bias to emotionally salient stimuli. In one format of this task, words are presented to participants in a mixed randomized or quasi-randomized sequence. Using a mixed smoking Stroop task, we have previously demonstrated that smokers are slower to respond to words which follow smoking-related words than words which follow neutral words. Here we show that this carry-over effect is present in heroin addicts-but not control subjects-in a heroin Stroop task, and in normal subjects in a stress Stroop task. Thus, the effect generalizes to other populations. In addition, an examination of the studies that have collected data from both mixed and blocked formats provides converging evidence for the presence of carry-over effects. We discuss the implications of the carry-over effect for research using the emotional Stroop task.

Collective symplectic integrators

International Nuclear Information System (INIS)

McLachlan, Robert I; Modin, Klas; Verdier, Olivier

2014-01-01

We construct symplectic integrators for Lie–Poisson systems. The integrators are standard symplectic (partitioned) Runge–Kutta methods. Their phase space is a symplectic vector space equipped with a Hamiltonian action with momentum map J whose range is the target Lie–Poisson manifold, and their Hamiltonian is collective, that is, it is the target Hamiltonian pulled back by J. The method yields, for example, a symplectic midpoint rule expressed in 4 variables for arbitrary Hamiltonians on so(3) ∗ . The method specializes in the case that a sufficiently large symmetry group acts on the fibres of J, and generalizes to the case that the vector space carries a bifoliation. Examples involving many classical groups are presented. (paper)

An Integrative Study of Photochemical Air Pollution in Hong Kong: an Overview

Science.gov (United States)

Wang, T.

2014-12-01

Hong Kong is situated in the Pearl River delta of Southern China. This region has experienced phenomenal economic growth in the past 30 years. Emissions of large amount of pollutants from urban areas and various industries coupled with subtropical climate have led to frequent occurrences of severe photochemical air pollution. Despite the long-term control efforts of the Hong Kong government, the atmospheric levels of ozone have been increasing in the past decade. To obtain an updated and more complete understanding of photochemical smog, an integrative study has been conducted during 2010-2014. Several intensive measurement campaigns were carried out at urban, suburban and rural sites in addition to the routine observations at fourteen air quality monitoring stations in Hong Kong. Meteorological, photochemical, and chemical-transport modeling studies were conducted to investigate the causes/processes of elevated photochemical pollution . The main activities of this study were to (1) examine the situation and trends of photochemical air pollution in Hong Kong, (2) understand some underlying chemical processes in particular the poorly-understood heterogeneous processes of reactive nitrogen oxides, (3) quantify the local, regional, and super-regional contributions to the ozone pollution in Hong Kong, and (4) review the control policy and make further recommendations based on the science. This paper will give an overview of this study and present some key results on the trends and chemistry of the photochemical pollution in this polluted subtropical region.

Preparation of grafted microspheres CPVA-g-PSSS and studies on their drug-carrying and colon-specific drug delivery properties

International Nuclear Information System (INIS)

Gao, Baojiao; Fang, Li; Men, Jiying; Zhang, Yanyan

2013-01-01

Sodium 4-styrene sulfonate (SSS) was graft-polymerized on the surfaces of crosslinked polyvinyl alcohol (CPVA) microspheres in a manner of surface-initiated graft-polymerization by using cerium salt-hydroxyl group redox initiation system, obtaining the grafted microspheres CPVA-g-PSSS. The chemical structure and physicochemical characters of CPVA-g-PSSS microspheres were fully characterized with infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and zeta potential determination. The aim of this work is to constitute a novel colon-specific drug delivery system via molecular design by using CPVA-g-PSSS microspheres as the drug-carrying material and by taking metronidazole (MTZ) as the model drug. The drug-carrying ability and mechanism of the grafted microspheres CPVA-g-PSSS for MTZ were investigated. Finally, in-vitro release tests for the drug-carrying microspheres were conducted. The experimental results show that in an acidic medium, the grafted microspheres CPVA-g-PSSS exhibit strong adsorption ability for MTZ by driving of electrostatic interaction, and have an adsorption capacity of 112 mg/g, displaying the high efficiency of drug-carrying. The in-vitro release behavior of the drug-carried microspheres is highly pH-sensitive. In the medium of pH = 1, the drug-carrying microspheres do not release the drug, whereas in the medium of pH = 7.4, a sudden delivery phenomenon of the drug will occur, displaying an excellent colon-specific drug delivery behavior. Highlights: ► A metronidazole colon-specific drug delivery was constituted using grafted polymeric microspheres. ► Grafted polymeric microspheres CPVA-g-PSSS were prepared via surface-initiated graft-polymerization. ► The release of the drug-carrying microspheres is highly pH-sensitive. ► The drug-carrying microspheres display an excellent colon-specific drug delivery behavior

Preparation of grafted microspheres CPVA-g-PSSS and studies on their drug-carrying and colon-specific drug delivery properties

Energy Technology Data Exchange (ETDEWEB)

Gao, Baojiao, E-mail: gaobaojiao@126.com [Department of Chemical Engineering, North University of China, Taiyuan 030051, People' s Republic of China (China); Fang, Li [School of Chemistry and Chemical engineering, Shanxi University, Taiyuan 030006 (China); Men, Jiying; Zhang, Yanyan [Department of Chemical Engineering, North University of China, Taiyuan 030051, People' s Republic of China (China)

2013-04-01

Sodium 4-styrene sulfonate (SSS) was graft-polymerized on the surfaces of crosslinked polyvinyl alcohol (CPVA) microspheres in a manner of surface-initiated graft-polymerization by using cerium salt-hydroxyl group redox initiation system, obtaining the grafted microspheres CPVA-g-PSSS. The chemical structure and physicochemical characters of CPVA-g-PSSS microspheres were fully characterized with infrared spectroscopy (FTIR), scanning electron microscopy (SEM) and zeta potential determination. The aim of this work is to constitute a novel colon-specific drug delivery system via molecular design by using CPVA-g-PSSS microspheres as the drug-carrying material and by taking metronidazole (MTZ) as the model drug. The drug-carrying ability and mechanism of the grafted microspheres CPVA-g-PSSS for MTZ were investigated. Finally, in-vitro release tests for the drug-carrying microspheres were conducted. The experimental results show that in an acidic medium, the grafted microspheres CPVA-g-PSSS exhibit strong adsorption ability for MTZ by driving of electrostatic interaction, and have an adsorption capacity of 112 mg/g, displaying the high efficiency of drug-carrying. The in-vitro release behavior of the drug-carried microspheres is highly pH-sensitive. In the medium of pH = 1, the drug-carrying microspheres do not release the drug, whereas in the medium of pH = 7.4, a sudden delivery phenomenon of the drug will occur, displaying an excellent colon-specific drug delivery behavior. Highlights: ► A metronidazole colon-specific drug delivery was constituted using grafted polymeric microspheres. ► Grafted polymeric microspheres CPVA-g-PSSS were prepared via surface-initiated graft-polymerization. ► The release of the drug-carrying microspheres is highly pH-sensitive. ► The drug-carrying microspheres display an excellent colon-specific drug delivery behavior.

Emergent Hydrodynamics in Integrable Quantum Systems Out of Equilibrium

Directory of Open Access Journals (Sweden)

Olalla A. Castro-Alvaredo

2016-12-01

Full Text Available Understanding the general principles underlying strongly interacting quantum states out of equilibrium is one of the most important tasks of current theoretical physics. With experiments accessing the intricate dynamics of many-body quantum systems, it is paramount to develop powerful methods that encode the emergent physics. Up to now, the strong dichotomy observed between integrable and nonintegrable evolutions made an overarching theory difficult to build, especially for transport phenomena where space-time profiles are drastically different. We present a novel framework for studying transport in integrable systems: hydrodynamics with infinitely many conservation laws. This bridges the conceptual gap between integrable and nonintegrable quantum dynamics, and gives powerful tools for accurate studies of space-time profiles. We apply it to the description of energy transport between heat baths, and provide a full description of the current-carrying nonequilibrium steady state and the transition regions in a family of models including the Lieb-Liniger model of interacting Bose gases, realized in experiments.

European wind power integration study. Periodic report 1

Energy Technology Data Exchange (ETDEWEB)

NONE

1992-12-31

This periodic report no. 1 describes the work done in the Danish part of the European Wind Power Integration Study in the period until 1.4.1991. The R and D project was initiated January 1, 1989 upon prior establishment of registration equipment at 7 wind farms and at the Tjaereborg turbine. ELSAM and the meteorological service centre in Karup (VTC-Karup) have supplied data for the task. Wind Predictability, Potential and Benefits, Wind Farm - Grid Interface, Distribution System Strength, Wind Farm Cost and Operation, and Co-generation Wind Turbines/Other renewables were measured and modelled. The statistical distribution of the wind speed variations (changes in wind speed from one period of time to another) has been established with great certainty in the report. The wind speed variations follow a Weibull distribution, irrespective of the time intervals with which the data are considered. Duration curves and power distributions for the 7 wind farms have been estimated. Registration equipment for one-minute measurements was chosen in order to clarify the short-term variations in the wind power production. The possibility of working out production forecasts, to be applied in the daily load dispatching, were to be assessed for the total amount of wind power production in Jutland and Funen. The report has examined whether it would be possible to have only one wind measurement and then let it be `guiding` for the total wind farm production. Some simulations are to be carried out in the attempt to set up guidelines for the connection between the strength of distribution systems and the requirements which must be made to the wind farms which are to be places in the system. (EG)

The integration of law and integrality of the legislation as necessary conditions for the success of law enforcement in interstate integration

Directory of Open Access Journals (Sweden)

Sergey Baburin

2017-01-01

processes, it is more appropriate to talk about integrality.The author critically analyzes the features of an integrative understanding of law that are highlighted in the legal literature.The results of the study can be applied in the design of the constitutional-legal mechanisms of interstate Eurasian integration in the framework of the legal modernization of the modern Russian state.Conclusions. The author comes to the conclusion that the use of integral norms of the legislation makes the law alive and develop the integration models. Instability of legal regulation is a serious challenge to the integrity of Russian law. Emerging legislation of the Union State of Russia and Belarus and the Eurasian Economic Union are integral, but the law of these political and legal entities is not integrative today, it does not exist simply. As a consequence, law enforcement in the States participating in the interstate integration is carried out only through the implementation of national legislation.

Studying the Factors Influencing a Choice of Devices for Carrying Out Inhalations on the Basis of Statistical Processing of Results Of Questionnaire

Directory of Open Access Journals (Sweden)

Galina A. Kharchenko

2016-05-01

Full Text Available Authors set the object, to study the factors influencing a choice of buyers of devices for carrying out inhalation on the basis of statistical processing of results of questionnaire of buyers, to analyze interrelation between the factors influencing a choice and purchase of the device and gender and age characteristics of potential buyers. The role of the doctor, worker of a drugstore, the Internet sites in the course of a choice, opinion of consumers of different age categories on the most preferable sources of information on devices for carrying out inhalation is revealed, preferences of buyers at a choice of a place of commission of purchase of devices for carrying out inhalation are defined. Feature of respondents of sources of information and making decision on purchase, female and male concerning use is shown.

Understanding Where Americas Public Discussion Takes Place In Todays Society: Case Studies of Concealed Weapons Carry Reform

Science.gov (United States)

2016-06-01

arguing that concealed carry permit holders are a danger to public safety and that mass shootings are taking place by citizens who are legally armed.2...who worked at an abortion clinic that had recently been bombed and whose life had been threatened was denied a license to carry because he was not...populace. The new law laid out new prohibitions and penalties enforceable statewide. Additionally, the Preemption Act was necessary to set the legal

Integrated smart structures wingbox

Science.gov (United States)

Simon, Solomon H.

1993-09-01

One objective of smart structures development is to demonstrate the ability of a mechanical component to monitor its own structural integrity and health. Achievement of this objective requires the integration of different technologies, i.e.: (1) structures, (2) sensors, and (3) artificial intelligence. We coordinated a team of experts from these three fields. These experts used reliable knowledge towards the forefront of their technologies and combined the appropriate features into an integrated hardware/software smart structures wingbox (SSW) test article. A 1/4 in. hole was drilled into the SSW test article. Although the smart structure had never seen damage of this type, it correctly recognized and located the damage. Based on a knowledge-based simulation, quantification and assessment were also carried out. We have demonstrated that the SSW integrated hardware & software test article can perform six related functions: (1) identification of a defect; (2) location of the defect; (3) quantification of the amount of damage; (4) assessment of performance degradation; (5) continued monitoring in spite of damage; and (6) continuous recording of integrity data. We present the successful results of the integrated test article in this paper, along with plans for future development and deployment of the technology.

Using Urban-Carrying Capacity as a Benchmark for Sustainable Urban Development: An Empirical Study of Beijing

Directory of Open Access Journals (Sweden)

Yigang Wei

2015-03-01

Full Text Available Sustainable urban development has been receiving growing concerns from both city managers and urban residents across the world. As a yardstick of sustainability, urban carrying capacity (UCC is an important conceptual underpinning that guides local governments in promoting sustainable urban development. However, existing studies still lack consensus not only on the theoretical aspects, but also on the methodological issues for UCC monitoring and evaluation. A knowledge gap exists, which this paper fills. This study aims to develop a practical UCC assessment framework to guide urban development towards achieving sustainability. The quantitative-based assessment framework provides a set of measurable indicators and benchmarks for city managers to conduct routine monitoring on progress toward urban sustainability, and helps identify deficient areas, which urgently need resource allocation to improve UCC. Focusing on a case study of Beijing, this study demonstrates that the framework is useful in promoting urban sustainability. This framework provides rich implications for other city prototypes in China as the nation marches into the next phase of development.

US Public Opinion on Carrying Firearms in Public Places.

Science.gov (United States)

Wolfson, Julia A; Teret, Stephen P; Azrael, Deborah; Miller, Matthew

2017-06-01

To estimate US public opinion, overall and by gun ownership status, about the public places where legal gun owners should be allowed to carry firearms. We fielded an online survey among 3949 adults, including an oversample of gun owners and veterans, in April 2015. We used cross-tabulations with survey weights to generate nationally representative estimates. Fewer than 1 in 3 US adults supported gun carrying in any of the specified venues. Support for carrying in public was consistently higher among gun owners than among non-gun owners. Overall, support for carrying in public was lowest for schools (19%; 95% confidence interval [CI] = 16.7, 21.1), bars (18%; 95% CI = 15.9, 20.6), and sports stadiums (17%; 95% CI = 15.0, 19.5). Most Americans, including most gun owners, support restricting public places legal gun owners can carry firearms. These views contrast sharply with the current trend in state legislatures of expanding where, how, and by whom guns can be carried in public. Recent state laws and proposed federal legislation that would force states to honor out-of-state concealed carry permits are out of step with American public opinion.

Performance Sustainability and Integrated Reporting: Empirical Evidence from Mandatory and Voluntary Adoption Contexts

Directory of Open Access Journals (Sweden)

Salvatore Loprevite

2018-04-01

Full Text Available This paper looks at the topic of regulation of integrated reporting for listed companies, with the aim of contributing to the debate on the usefulness of introducing a mandatory regime, both from the perspective of integrated performance sustainability of companies and from that of relevance of information for providers of financial capital. The study is based on empirical research carried out on a sample composed of companies operating in territories where the adoption of integrated reporting is voluntary (Europe and those operating in a country where adoption is mandatory (South Africa. The research shows that (a in voluntary regimes, levels of integrated performance achieved by companies are higher; (b mandatory regulation produces positive effects on integrated performance levels in the medium term; (c integrated performance indicators are value-relevant, though having different levels of relevance under the two regimes examined.

India RE Grid Integration Study

Energy Technology Data Exchange (ETDEWEB)

Cochran, Jaquelin M [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2017-09-08

The use of renewable energy (RE) sources, primarily wind and solar generation, is poised to grow significantly within the Indian power system. The Government of India has established a target of 175 gigawatts (GW) of installed RE capacity by 2022, including 60 GW of wind and 100 GW of solar, up from 29 GW wind and 9 GW solar at the beginning of 2017. Thanks to advanced weather and power system modeling made for this project, the study team is able to explore operational impacts of meeting India's RE targets and identify actions that may be favorable for integration.

An integrated study of surface roughness in EDM process using regression analysis and GSO algorithm

Science.gov (United States)

Zainal, Nurezayana; Zain, Azlan Mohd; Sharif, Safian; Nuzly Abdull Hamed, Haza; Mohamad Yusuf, Suhaila

2017-09-01

The aim of this study is to develop an integrated study of surface roughness (Ra) in the die-sinking electrical discharge machining (EDM) process of Ti-6AL-4V titanium alloy with positive polarity of copper-tungsten (Cu-W) electrode. Regression analysis and glowworm swarm optimization (GSO) algorithm were considered for modelling and optimization process. Pulse on time (A), pulse off time (B), peak current (C) and servo voltage (D) were selected as the machining parameters with various levels. The experiments have been conducted based on the two levels of full factorial design with an added center point design of experiments (DOE). Moreover, mathematical models with linear and 2 factor interaction (2FI) effects of the parameters chosen were developed. The validity test of the fit and the adequacy of the developed mathematical models have been carried out by using analysis of variance (ANOVA) and F-test. The statistical analysis showed that the 2FI model outperformed with the most minimal value of Ra compared to the linear model and experimental result.

36 CFR 1005.4 - Commercial passenger-carrying motor vehicles.

Science.gov (United States)

2010-07-01

... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Commercial passenger-carrying motor vehicles. 1005.4 Section 1005.4 Parks, Forests, and Public Property PRESIDIO TRUST COMMERCIAL AND PRIVATE OPERATIONS § 1005.4 Commercial passenger-carrying motor vehicles. Passenger-carrying motor...

A case study: Integrated work environment and organizational change

Energy Technology Data Exchange (ETDEWEB)

Heubach, J.G.; Montgomery, J.C.; Weimer, W.C. [Pacific Northwest Lab., Richland, WA (United States); Heerwagen, J.H. [Battelle Seattle Research Center, WA (United States)

1995-02-01

The failure to integrate environmental and organizational interventions may help explain the lack of success of many change efforts. The high rate of failure for change efforts (50% to 90% failure rates) has been noted by many writers. While specific causes of failure are diverse, a common theme has been failure to consider the organization as a system. That is, either significant aspects of the organization were ignored during the intervention or potential impacts of changes on the elements were overlooked or underestimated. Our own training, technical literature, and professional culture lead us to limited understandings of complex organizations. Change agents must consider all relevant components of organizational performance if interventions are to be meaningful and successful. This study demonstrated the value of an integrated organizational intervention involving redesign of the physical environment, introduction of a new information system, work process improvement, and extended organizational development intervention. The outcomes were extremely positive. The cost of improvement efforts was found to be recaptured within a short time, easily justifying the expenditures. One conclusion from the study is that integrated interventions are very powerful. Integrating improvement of the physical environment with organizational development and technological innovation greatly enhances the likelihood of achieving a successful intervention.

Design and implementation of integrated solid wastes management pattern in industrial zones, case study of Shahroud, Iran.

Science.gov (United States)

Saeid, Nazemi; Roudbari, Aliakbar; Yaghmaeian, Kamyar

2014-01-14

The aim of the study was to design and implementation of integrated solid wastes management pattern in Shahroud industrial zone, evaluates the results and determine possible performance problems. This cross - sectional study was carried out for 4 years in Shahroud industrial zone and the implementation process included:1- Qualitative and quantitative analysis of all solid waste generated in the city, 2- determine the current state of solid waste management in the zone and to identify programs conducted, 3- Design and implementation of integrated solid wastes management pattern including design and implementation of training programs, laws, penalties and incentives and explain and implement programs for all factories and 4- The monitoring of the implementation process and determine the results. Annually, 1,728 tons of solid wastes generated in the town including 1603 tons of industrial wastes and 125 tons of municipal wastes. By implementing this pattern, the two separated systems of collection and recycling of domestic and industrial wastes was launched in this zone. Also consistent with the goals, the amount of solid wastes generated and disposed in 2009 was 51.5 and 28.6 kg per 100 million Rials production, respectively. Results showed that implementation of pattern of separated collection, training programs, capacity building, providing technical services, completing chain of industries and strengthening the cooperation between industrial estate management and industrial units could greatly reduce the waste management problems.

Research on Psychological Carrying Capacity of Tourism Destination

Institute of Scientific and Technical Information of China (English)

Fan Zhiyong; Zhong Sheng

2009-01-01

As a part of the carrying capacity system of tourism destination,tourism psychological carrying capacity and its makeup are very important indexes which reflect the harmonious development of tourism destination develops harmoniously,but the academy has not paid enough attention to them.Based on the concept and connotation of psychological carrying capacity,this paper explains the influencing factors which affect the psychological capacity of the tourist and the resident after the acknowledged concept,and then designs a harmonious development model of tourism destination.Finally,it offers some countermeasures against the overloading psychological capacity.

Modelling of carry-over in recovery furnaces

Energy Technology Data Exchange (ETDEWEB)

Fakhrai, Reza [Royal Inst. of Tech., Stockholm (Sweden). Dept. of Metallurgy

2000-04-01

Development of mathematical modelling of the combustion process in the furnace of recovery boilers is the subject of this work. This work as a continuation of many years of modelling efforts carried out at KTH/Vaerme- och Ugnsteknik focussed particularly on: char bed modelling; droplets-wall interaction modelling; and carry-over modelling. The char bed model has been studied. Droplets/parcels were considered as a single reactor working independently of the other droplets. The mass of the droplets was not distributed uniformly but induced in the landing place. The droplets hitting the char bed will stick to it and they are alive and part of the calculation. In this way the distribution of the mass on the char bed is only dependent on the parameters which effect flight history such as droplet/parcel diameter, boilers flow field, etc. The droplet- wall interaction model has been studied and found to be very important for obtaining the correct temperature distribution in the recovery furnace. The new approach is based on removal of droplets which hits the wall in the upper part of the recovery boiler from carryover calculation. This model has been proposed and implemented into the GRFM (General Recovery Furnace Model). The carryover modelling effort was based on mass balance in which the number and physical statistics of the droplets/parcel were estimated and the amount of unburned mass was calculated. All of the above listed models were tested together with all other models of heat and mass transfer processes in recovery furnaces using a GRFM. Three-dimensional numerical simulations of the industrial recovery boiler (63 kg/s, 82 bar, 480 deg C) were performed. The number of grid was 232,000 and the number of air ports in this simulation was 178. The air entering the furnace by these ports has different flow rates. Flow and temperature fields as well as species distributions were calculated. The results show good agreement with previously published data and modelling

The GEOSS solution for enabling data interoperability and integrative research.

Science.gov (United States)

Nativi, Stefano; Mazzetti, Paolo; Craglia, Max; Pirrone, Nicola

2014-03-01

Global sustainability research requires an integrative research effort underpinned by digital infrastructures (systems) able to harness data and heterogeneous information across disciplines. Digital data and information sharing across systems and applications is achieved by implementing interoperability: a property of a product or system to work with other products or systems, present or future. There are at least three main interoperability challenges a digital infrastructure must address: technological, semantic, and organizational. In recent years, important international programs and initiatives are focusing on such an ambitious objective. This manuscript presents and combines the studies and the experiences carried out by three relevant projects, focusing on the heavy metal domain: Global Mercury Observation System, Global Earth Observation System of Systems (GEOSS), and INSPIRE. This research work recognized a valuable interoperability service bus (i.e., a set of standards models, interfaces, and good practices) proposed to characterize the integrative research cyber-infrastructure of the heavy metal research community. In the paper, the GEOSS common infrastructure is discussed implementing a multidisciplinary and participatory research infrastructure, introducing a possible roadmap for the heavy metal pollution research community to join GEOSS as a new Group on Earth Observation community of practice and develop a research infrastructure for carrying out integrative research in its specific domain.

Integrated modelling of two xenobiotic organic compounds

DEFF Research Database (Denmark)

Lindblom, Erik Ulfson; Gernaey, K.V.; Henze, Mogens

2006-01-01

This paper presents a dynamic mathematical model that describes the fate and transport of two selected xenobiotic organic compounds (XOCs) in a simplified representation. of an integrated urban wastewater system. A simulation study, where the xenobiotics bisphenol A and pyrene are used as reference...... compounds, is carried out. Sorption and specific biological degradation processes are integrated with standardised water process models to model the fate of both compounds. Simulated mass flows of the two compounds during one dry weather day and one wet weather day are compared for realistic influent flow...... rate and concentration profiles. The wet weather day induces resuspension of stored sediments, which increases the pollutant load on the downstream system. The potential of the model to elucidate important phenomena related to origin and fate of the model compounds is demonstrated....

Integrable systems, geometry, and topology

CERN Document Server

Terng, Chuu-Lian

2006-01-01

The articles in this volume are based on lectures from a program on integrable systems and differential geometry held at Taiwan's National Center for Theoretical Sciences. As is well-known, for many soliton equations, the solutions have interpretations as differential geometric objects, and thereby techniques of soliton equations have been successfully applied to the study of geometric problems. The article by Burstall gives a beautiful exposition on isothermic surfaces and their relations to integrable systems, and the two articles by Guest give an introduction to quantum cohomology, carry out explicit computations of the quantum cohomology of flag manifolds and Hirzebruch surfaces, and give a survey of Givental's quantum differential equations. The article by Heintze, Liu, and Olmos is on the theory of isoparametric submanifolds in an arbitrary Riemannian manifold, which is related to the n-wave equation when the ambient manifold is Euclidean. Mukai-Hidano and Ohnita present a survey on the moduli space of ...

Influence of time-dependent elastic-plastic material behaviour on the load-carrying capacity of shells of revolution

International Nuclear Information System (INIS)

Schnabel, F.

1987-01-01

The present report deals with the influence of time-dependent material behavior on the load-carrying capacity of thin-walled shells of revolution. In the first part various creep-hardening hypotheses as well as the spatial and temporal discretization procedures employed are described. The adaptation of a well-tested finite element method based on ring elements to the treatment of creep problems and several time-integration procedures, in particular the iterative treatment of the coupling between creep and elastic-plastic strains as well as the important aspect of time-step-control are discussed in detail. In the second part several typical shell configurations are analyzed and a comparison with available theoretical and experimental results is made. Finally, the time-dependent load-carrying behavior of torispherical pressure vessel ends subjected to internal and external pressure is investigated and design aids for the determination of creep collapse times are proposed. (orig.) [de

The INTEGRAL mission

DEFF Research Database (Denmark)

Winkler, C.; Courvoisier, T.J.L.; Di Cocco, G.

2003-01-01

in the X-ray (3-35 keV) and optical (V-band, 550 nm) energy ranges. INTEGRAL carries two main gamma-ray instruments, the spectrometer SPI (Vedrenne et al. 2003)-optimized for the high-resolution gamma-ray line spectroscopy (20 keV-8 MeV), and the imager IBIS (Ubertini et al. 2003)-optimized for high......The ESA observatory INTEGRAL (International Gamma-Ray Astrophysics Laboratory) is dedicated to the fine spectroscopy (2.5 keV FWHM @ 1 MeV) and fine imaging (angular resolution: 12 arcmin FWHM) of celestial gamma-ray sources in the energy range 15 keV to 10 MeV with concurrent source monitoring...... Centre at ESTEC and the Science Data Centre near Geneva. INTEGRAL was launched on 17 October 2002. The observing programme is well underway and sky exposure (until June 2003) reaches similar to1800 ks in the Galactic plane. The prospects are excellent for the scientific community to observe the high...

Review on the Evaluation System of Public Safety Carrying Capacity about Small Town Community

Institute of Scientific and Technical Information of China (English)

Ming; SUN; Tianyu; ZHU

2014-01-01

Recently,small town community public safety problem has been increasingly highlighted,but its research is short on public safety carrying capacity. Through the investigation and study of community public safety carrying capacity,this paper analyzes the problem of community public safety in our country,to construct index evaluation system of public safety carrying capacity in small town community. DEA method is used to evaluate public safety carrying capacity in small town community,to provide scientific basis for the design of support and standardization theory about small town community in public safety planning.

State-of-the-art Review : Vol. 2B. Integrated Building Concepts

DEFF Research Database (Denmark)

van der Aa, Ad; Andresen, Inger; Asada, Hideo

an overview of 23 case study buildings from 9 countries with integrated building concepts. The overview provides descriptions of the buildings and their contexts, a description of the integrated energy systems, and the overall performance of the building with respect to energy, indoor environment and costs......The purpose of this report is to give examples of integrated building concepts and related available performance data and information. The report does not aspire to give a complete overview of all possible integrated building concepts and processes. The buildings included in the report have been...... selected according to the knowledge of the participants in the project, as characteristic examples of the concepts and the challenges they represent. The report will be a common basis for the research and development work that is going to be carried out within the IEA Annex 44 project. The report contains...

State Gun Law Environment and Youth Gun Carrying in the United States.

Science.gov (United States)

Xuan, Ziming; Hemenway, David

2015-11-01

Gun violence and injuries pose a substantial threat to children and youth in the United States. Existing evidence points to the need for interventions and policies for keeping guns out of the hands of children and youth. (1) To examine the association between state gun law environment and youth gun carrying in the United States, and (2) to determine whether adult gun ownership mediates this association. This was a repeated cross-sectional observational study design with 3 years of data on youth gun carrying from US states. The Youth Risk Behavior Survey comprises data of representative samples of students in grades 9 to 12 from biennial years of 2007, 2009, and 2011. We hypothesized that states with more restrictive gun laws have lower rates of youth gun carrying, and this association is mediated by adult gun ownership. State gun law environment as measured by state gun law score. Youth gun carrying was defined as having carried a gun on at least 1 day during the 30 days before the survey. In the fully adjusted model, a 10-point increase in the state gun law score, which represented a more restrictive gun law environment, was associated with a 9% decrease in the odds of youth gun carrying (adjusted odds ratio [AOR], 0.91 [95% CI, 0.86-0.96]). Adult gun ownership mediated the association between state gun law score and youth gun carrying (AOR, 0.94 [ 95% CI, 0.86-1.01], with 29% attenuation of the regression coefficient from -0.09 to -0.07 based on bootstrap resampling). More restrictive overall gun control policies are associated with a reduced likelihood of youth gun carrying. These findings are relevant to gun policy debates about the critical importance of strengthening overall gun law environment to prevent youth gun carrying.

Random noise characterization on the carrying capacities of a ...

African Journals Online (AJOL)

The process of the survival of species dependent on a limited resource in a polluted environment which isnot a new idea can be described by the technique of a mathematical modelling. We have utilised the technique of a numerical simulation to study the impact of environmental random noise on the carrying capacities of ...

Cuttings-carried theory and erosion rule in gas drilling horizontal well

Directory of Open Access Journals (Sweden)

Wei Na

2014-01-01

Full Text Available In gas horizontal drilling, the gas with cuttings will go through the annulus at high speed which will lead strong erosion to the drill tools. This paper proposes a cuttings-carried theory and modified the critical cuttings-carried model for the gas-solid flow. Meanwhile, the erosive energy is obtained through simulating the gas-solid mixture in different conditions. The study result has positive significance on the determination of reasonable injection volume by optimizing construction parameters of horizontal well in gas drilling.

Advancements in Wind Integration Study Data Modeling: The Wind Integration National Dataset (WIND) Toolkit; Preprint

Energy Technology Data Exchange (ETDEWEB)

Draxl, C.; Hodge, B. M.; Orwig, K.; Jones, W.; Searight, K.; Getman, D.; Harrold, S.; McCaa, J.; Cline, J.; Clark, C.

2013-10-01

Regional wind integration studies in the United States require detailed wind power output data at many locations to perform simulations of how the power system will operate under high-penetration scenarios. The wind data sets that serve as inputs into the study must realistically reflect the ramping characteristics, spatial and temporal correlations, and capacity factors of the simulated wind plants, as well as be time synchronized with available load profiles. The Wind Integration National Dataset (WIND) Toolkit described in this paper fulfills these requirements. A wind resource dataset, wind power production time series, and simulated forecasts from a numerical weather prediction model run on a nationwide 2-km grid at 5-min resolution will be made publicly available for more than 110,000 onshore and offshore wind power production sites.

Structural integrity and management of aging in internal components of BWR reactors

International Nuclear Information System (INIS)

Arganis J, C.R.

2004-01-01

Presently work the bases to apply structural integrity and the handling of the aging of internal components of the pressure vessel of boiling water reactors of water are revised and is carried out an example of structural integrity in the horizontal welding H4 of the encircling one of the core of a reactor, taking data reported in the literature. It is also revised what is required to carry out the handling program or conduct of the aging (AMP). (Author)

Role of innovative institutional structures in integrated governance. A case study of integrating health and nutrition programs in Chhattisgarh, India.

Science.gov (United States)

Kalita, Anuska; Mondal, Shinjini

2012-01-01

The aim of this paper is to highlight the significance of integrated governance in bringing about community participation, improved service delivery, accountability of public systems and human resource rationalisation. It discusses the strategies of innovative institutional structures in translating such integration in the areas of public health and nutrition for poor communities. The paper draws on experience of initiating integrated governance through innovations in health and nutrition programming in the resource-poor state of Chhattisgarh, India, at different levels of governance structures--hamlets, villages, clusters, blocks, districts and at the state. The study uses mixed methods--i.e. document analysis, interviews, discussions and quantitative data from facilities surveys--to present a case study analyzing the process and outcome of integration. The data indicate that integrated governance initiatives improved convergence between health and nutrition departments of the state at all levels. Also, innovative structures are important to implement the idea of integration, especially in contexts that do not have historical experience of such partnerships. Integration also contributed towards improved participation of communities in self-governance, community monitoring of government programs, and therefore, better services. As governments across the world, especially in developing countries, struggle towards achieving better governance, integration can serve as a desirable process to address this. Integration can affect the decentralisation of power, inclusion, efficiency, accountability and improved service quality in government programs. The institutional structures detailed in this paper can provide models for replication in other similar contexts for translating and sustaining the idea of integrated governance. This paper is one of the few to investigate innovative public institutions of a and community mobilisation to explore this important, and under

European wood pellet market integration - A study of the residential sector

International Nuclear Information System (INIS)

Olsson, Olle; Hillring, Bengt; Vinterbaeck, Johan

2011-01-01

The integration of European energy markets is a key goal of EU energy policy, and has also been the focal point of many scientific studies in recent years. International markets for coal, oil, natural gas and electricity have previously been investigated in order to determine the extent of the respective markets. This study enhances this field of research to bioenergy markets. Price series data and time series econometrics are used to determine whether residential sector wood pellet markets of Austria, Germany and Sweden are integrated. The results of the econometric tests show that the German and Austrian markets can be considered to be integrated, whereas the Swedish market is separate from the other two countries. Although increased internationalization of wood pellet markets is likely to contribute to European price convergence and market integration, this process is far from completed. (author)

Cell Culture Systems To Study Human Herpesvirus 6A/B Chromosomal Integration.

Science.gov (United States)

Gravel, Annie; Dubuc, Isabelle; Wallaschek, Nina; Gilbert-Girard, Shella; Collin, Vanessa; Hall-Sedlak, Ruth; Jerome, Keith R; Mori, Yasuko; Carbonneau, Julie; Boivin, Guy; Kaufer, Benedikt B; Flamand, Louis

2017-07-15

Human herpesviruses 6A/B (HHV-6A/B) can integrate their viral genomes in the telomeres of human chromosomes. The viral and cellular factors contributing to HHV-6A/B integration remain largely unknown, mostly due to the lack of efficient and reproducible cell culture models to study HHV-6A/B integration. In this study, we characterized the HHV-6A/B integration efficiencies in several human cell lines using two different approaches. First, after a short-term infection (5 h), cells were processed for single-cell cloning and analyzed for chromosomally integrated HHV-6A/B (ciHHV-6A/B). Second, cells were infected with HHV-6A/B and allowed to grow in bulk for 4 weeks or longer and then analyzed for the presence of ciHHV-6. Using quantitative PCR (qPCR), droplet digital PCR, and fluorescent in situ hybridization, we could demonstrate that HHV-6A/B integrated in most human cell lines tested, including telomerase-positive (HeLa, MCF-7, HCT-116, and HEK293T) and telomerase-negative cell lines (U2OS and GM847). Our results also indicate that inhibition of DNA replication, using phosphonoacetic acid, did not affect HHV-6A/B integration. Certain clones harboring ciHHV-6A/B spontaneously express viral genes and proteins. Treatment of cells with phorbol ester or histone deacetylase inhibitors triggered the expression of many viral genes, including U39 , U90 , and U100 , without the production of infectious virus, suggesting that the tested stimuli were not sufficient to trigger full reactivation. In summary, both integration models yielded comparable results and should enable the identification of viral and cellular factors contributing to HHV-6A/B integration and the screening of drugs influencing viral gene expression, as well as the release of infectious HHV-6A/B from the integrated state. IMPORTANCE The analysis and understanding of HHV-6A/B genome integration into host DNA is currently limited due to the lack of reproducible and efficient viral integration systems. In the

Carrying Capacity Model Applied to Coastal Ecotourism of Baluran National Park, Indonesia

Science.gov (United States)

Armono, H. D.; Rosyid, D. M.; Nuzula, N. I.

2017-07-01

The resources of Baluran National Park have been used for marine and coastal ecotourism. The increasing number of visitors has led to the increasing of tourists and its related activities. This condition will cause the degradation of resources and the welfare of local communities. This research aims to determine the sustainability of coastal ecotourism management by calculating the effective number of tourists who can be accepted. The study uses the concept of tourism carrying capacity, consists the ecological environment, economic, social and physical carrying capacity. The results of the combined carrying capacity analysis in Baluran National Park ecotourism shows that the number of 3.288 people per day (151.248 tourists per year) is the maximum number of accepted tourists. The current number of tourist arrivals is only 241 people per day (87.990 tourists per year) which is far below the carrying capacity.

Differing Perceptions Concerning Research Integrity Between Universities and Industry: A Qualitative Study.

Science.gov (United States)

Godecharle, Simon; Nemery, Benoit; Dierickx, Kris

2017-09-14

Despite the ever increasing collaboration between industry and universities, the previous empirical studies on research integrity and misconduct excluded participants of biomedical industry. Hence, there is a lack of empirical data on how research managers and biomedical researchers active in industry perceive the issues of research integrity and misconduct, and whether or not their perspectives differ from those of researchers and research managers active in universities. If various standards concerning research integrity and misconduct are upheld between industry and universities, this might undermine research collaborations. Therefore we performed a qualitative study by conducting 22 semi-structured interviews in order to investigate and compare the perspectives and attitudes concerning the issues of research integrity and misconduct of research managers and biomedical researchers active in industry and universities. Our study showed clear discrepancies between both groups. Diverse strategies in order to manage research misconduct and to stimulate research integrity were observed. Different definitions of research misconduct were given, indicating that similar actions are judged heterogeneously. There were also differences at an individual level, whether the interviewees were active in industry or universities. Overall, the management of research integrity proves to be a difficult exercise, due to many diverse perspectives on several essential elements connected to research integrity and misconduct. A management policy that is not in line with the vision of the biomedical researchers and research managers is at risk of being inefficient.

Models and impact of patient and public involvement in studies carried out by the Medical Research Council Clinical Trials Unit at University College London: findings from ten case studies.

Science.gov (United States)

South, Annabelle; Hanley, Bec; Gafos, Mitzy; Cromarty, Ben; Stephens, Richard; Sturgeon, Kate; Scott, Karen; Cragg, William J; Tweed, Conor D; Teera, Jacqueline; Vale, Claire L

2016-07-29

Patient and public involvement (PPI) in studies carried out by the UK Medical Research Council Clinical Trials Unit (MRC CTU) at University College London varies by research type and setting. We developed a series of case studies of PPI to document and share good practice. We used purposive sampling to identify studies representing the scope of research at the MRC CTU and different approaches to PPI. We carried out semi-structured interviews with staff and patient representatives. Interview notes were analysed descriptively to categorise the main aims and motivations for involvement; activities undertaken; their impact on the studies and lessons learned. We conducted 19 interviews about ten case studies, comprising one systematic review, one observational study and 8 randomised controlled trials in HIV and cancer. Studies were either open or completed, with start dates between 2003 and 2011. Interviews took place between March and November 2014 and were updated in summer 2015 where there had been significant developments in the study (i.e. if the study had presented results subsequent to the interview taking place). A wide range of PPI models, including representation on trial committees or management groups, community engagement, one-off task-focused activities, patient research partners and participant involvement had been used. Overall, interviewees felt that PPI had a positive impact, leading to improvements, for example in the research question; study design; communication with potential participants; study recruitment; confidence to carry out or complete a study; interpretation and communication of results; and influence on future research. A range of models of PPI can benefit clinical studies. Researchers should consider different approaches to PPI, based on the desired impact and the people they want to involve. Use of multiple models may increase the potential impacts of PPI in clinical research.

Acceleration of Feynman loop integrals in high-energy physics on many core GPUs

International Nuclear Information System (INIS)

Yuasa, F; Ishikawa, T; Hamaguchi, N; Koike, T; Nakasato, N

2013-01-01

The current and future colliders in high-energy physics require theorists to carry out a large scale computation for a precise comparison between experimental results and theoretical ones. In a perturbative approach several methods to evaluate Feynman loop integrals which appear in the theoretical calculation of cross-sections are well established in the one-loop level, however, more studies are necessary for higher-order levels. Direct Computation Method (DCM) is developed to evaluate multi-loop integrals. DCM is based on a combination of multidimensional numerical integration and extrapolation on a sequence of integrals. It is a fully numerical method and is applicable to a wide class of integrals with various physics parameters. The computation time depends on physics parameters and the topology of loop diagrams and it becomes longer for the two-loop integrals. In this paper we present our approach to the acceleration of the two-loop integrals by DCM on multiple GPU boards

楼观台森林公园旅游环境容量研究%Tourism Environmental Carrying Capacity of Louguantai Forest Park

Institute of Scientific and Technical Information of China (English)

张晓慧; 陈强

2011-01-01

综合旅游空间容量、旅游生态容量、旅游设施容量、旅游心理容量4个因素,对楼观台国家森林公园旅游环境容量进行了测算,通过对比发现楼观台森林公园游客接待量远小于理论旅游环境容量,并对造成这种现状的主要原因进行了分析,提出了相关建议.%In this paper, an integrated estimation on the tourism environmental carrying capacity of Louguantai National Forest Park was made from the aspects of ecological carrying capacity, spatial carrying capacity, facility carrying capacity, and psychological carrying capacity. It was found that the number of reception tourists in the park was far less than its theoretical predication tourism environment capacity. Main reasons were analysised and some suggestions were proposed.

Practice of the integrated endocrine system course

Institute of Scientific and Technical Information of China (English)

Wen-han MEI; Rong CAI

2015-01-01

The integrated curriculum is an important direction of the medical medical education reform under new situation and challenges of medical development.Shanghai Jiao Tong University School of Medicine has implemented the integrated curriculum reform in recent years.The endocrine system course is one of important intergrated courses and integrates relevant contents of multiple disciplines of basic medicine,diagnostics and medical imaging.Various teaching methods are adopted,such as classroom lecture,discussion,problembased learning,experimental lesson and clinical clerkship,etc.The teaching practice is carried on in several aspects:course arrangement,teaching methods,course website construction,teaching team construction and so on.

Supply chain integration in the product return process: A study of consumer electronics retailers

Directory of Open Access Journals (Sweden)

Wynand Mostert

2017-07-01

Contribution: Academically, this study expands the literature on supply chain integration in an unexplored context. For managers, this study identifies various reverse logistics integration barriers and details what practices and strategies improve the probability of successful integration efforts.

A case Study of Work-Integrated Learning

Directory of Open Access Journals (Sweden)

Kerstin Grundén

2004-10-01

Full Text Available An evaluation study of work-integrated e-learning in the county administration of Sweden is reported and discussed. A web-based prototype (Diabas for in-house education dealing with the official registers, was developed and tested. The MOA-L model was used as a frame of reference for the evaluation study. In the model especially the consequences for the work situation, the work process and the quality of the service to the client was focussed. The present situation as well as the situation after the learners had passed the course was studied and compared. The initial analysis of the present situation regarding these aspects was seen as very important for the development process of the course. Similarities between the development of work-integrated learning courses and traditional system development work was analysed and discussed. Cultural aspects and management policies were seen as very important in order to motivate the learners to attend the course. The learners were on the whole satisfied with the pilot course. The flexible forms for the course was seen as important. The work situation and the work flow need to be adapted in order to facilitate the use of the new knowledge after the course.

Lactose carrier protein of Escherichia coli. Structure and expression of plasmids carrying the Y gene of the lac operon.

Science.gov (United States)

Teather, R M; Bramhall, J; Riede, I; Wright, J K; Fürst, M; Aichele, G; Wilhelm, U; Overath, P

1980-01-01

The previously described hybrid plasmid pC7 which carries lacI+O+delta(Z)Y+A+ on a 12.3 X 10(6)-Mr DNA fragment [Teather et al. (1978) Mol. Gen. Genet. 159, 239-248] was partially digested with the restriction endonuclease EcoRI under conditions reducing the recognition sequence to d(A-A-T-T) and ligated to the vector pB322. lac Y-carrying inserts of various sized (Mr 1.5-4.7 X 10(6)) were obtained. Hybrid plasmid pTE18 (2300-base-pair insert) carries part of the I (repressor) gene, the promotor-operator region, part of the Z (beta-galactosidase) gene, the Y (lactose carrier) gene and part of the A (transacetylase) gene. Upon induction of pTE18-harbouring strains the Y-gene product is expressed at a nearly constant rate for several generations and accumulates to a level of 12-16% of the total cytoplasmic membrane protein. Integration into the membrane leads to active carrier as judged by binding and transport measurements.

Integration of torrefaction in CHP plants – A case study

International Nuclear Information System (INIS)

Starfelt, Fredrik; Tomas Aparicio, Elena; Li, Hailong; Dotzauer, Erik

2015-01-01

Highlights: • We model the integration of a torrefaction reactor in a CHP plant. • Techno-economic analysis for the system is performed. • Flue gas integration of torrefaction show better performance. • Heat or electricity production is not compromised in the proposed system. - Abstract: Torrefied biomass shows characteristics that resemble those of coal. Therefore, torrefied biomass can be co-combusted with coal in existing coal mills and burners. This paper presents simulation results of a case study where a torrefaction reactor was integrated in an existing combined heat and power plant and sized to replace 25%, 50%, 75% or 100% of the fossil coal in one of the boilers. The simulations show that a torrefaction reactor can be integrated with existing plants without compromising heat or electricity production. Economic and sensitivity analysis show that the additional cost for integrating a torrefaction reactor is low which means that with an emission allowance cost of 37 €/ton CO 2 , the proposed integrated system can be profitable and use 100% renewable fuels. The development of subsidies will affect the process economy. The determinant parameters are electricity and fuel prices

Results of the Study of Helminths-Carrying as a Comorbidity in Children with Herpetic Stomatitis

Directory of Open Access Journals (Sweden)

E.S. Suerkulov

2016-09-01

Full Text Available The paper analyzes the helminths-carrying in children with herpetic stomatitis according to the data of the department of maxillofacial surgery of the National center of mother and child welfare, and determines the relationship of oral diseases with disorders of various parts of the gastrointestinal tract.

25 CFR 23.51 - Grant carry-over authority.

Science.gov (United States)

2010-04-01

... 25 Indians 1 2010-04-01 2010-04-01 false Grant carry-over authority. 23.51 Section 23.51 Indians... Uniform Grant Administration Provisions and Requirements § 23.51 Grant carry-over authority. Unless... two years beyond the initial grant funding period and must be utilized only for the intent, purpose...

Exergy analysis of a combined heat and power plant with integrated lignocellulosic ethanol production

DEFF Research Database (Denmark)

Lythcke-Jørgensen, Christoffer Ernst; Haglind, Fredrik; Clausen, Lasse Røngaard

2014-01-01

production. An exergy analysis is carried out for a modelled polygeneration system in which lignocellulosic ethanol production based on hydrothermal pretreatment is integrated in an existing combined heat and power (CHP) plant. The ethanol facility is driven by steam extracted from the CHP unit when feasible...... district heating production in the ethanol facility. The results suggest that the efficiency of integrating lignocellulosic ethanol production in CHP plants is highly dependent on operation, and it is therefore suggested that the expected operation pattern of such polygeneration system is taken......Lignocellulosic ethanol production is often assumed integrated in polygeneration systems because of its energy intensive nature. The objective of this study is to investigate potential irreversibilities from such integration, and what impact it has on the efficiency of the integrated ethanol...

A new Gauss quadrature for multicentre integrals over STOs in the Gaussian integral transform approach

International Nuclear Information System (INIS)

Bouferguene, Ahmed

2005-01-01

When computing multicentre integrals over Slater-type orbitals (STOs) by means of the Shavitt and Karplus Gaussian integral transforms (Shavitt and Karplus 1962 J. Chem. Phys. 36 550), one usually ends up with a multiple integral of the form ∫ 0 1 du ∫ 0 1 dv ...∫ 0 ∞ dz F(u, v, ..., z) (Shavitt and Karplus 1965 J. Chem. Phys. 43 398) in which all the integrals are inter-related. The most widely used approach for computing such an integral is to apply a product of Gauss-Legendre quadratures for the integrals over [0, 1] while the semi-infinite term is evaluated by a special procedure. Although numerous approaches have been developed to accurately perform the integration over [0, ∞) efficiently, it is the aim of this work to add a new tool that could be of some benefit in carrying out the hard task of multicentre integrals over STOs. The new approach relies on a special Gauss quadrature referred to as Gauss-Bessel to accurately evaluate the semi-infinite integral of interest. In this work, emphasis is put on accuracy rather than efficiency since its aim is essentially to bring a proof of concept showing that Gauss-Bessel quadrature can successfully be applied in the context of multicentre integrals over STOs. The obtained accuracy is comparable to that obtained with other methods available in the literature

Naturkraft integration at Kaarstoe. Mapping study report 6 march 2009

Energy Technology Data Exchange (ETDEWEB)

Odland, Oeystein; Hoeie, Hans; Aanestad, Per; Hauge, Bjoern I.; Solvang, Svein; Boee, Stein Espen; Lervik, Steinar; Kristiansen, Arild

2007-07-01

Gassco is engaged in three different studies and projects related to reduce CO{sub 2} emissions at Kaarstoe; 1. Gassnova's CO{sub 2} capture, transport and storage projects at Kaarstoe and Mongstad (the CO{sub 2} Transportation Network), where Gassco role is to mature the transportation facilities of the project. An investment decision is planned for second half of 2009. 2. The Kaarstoe Flue Gas Capture pre-feasibility study initiated by the MPE to Gassco as operator of Gassled in connection with approval of the Kaarstoe Expansion Project 2010, to evaluate the potential of capturing the CO{sub 2} emissions at the Kaarstoe gas processing plant, and reported to the MPE 3 March 2009, and 3. This Naturkraft Integration Mapping Study initiated by MPE to meet the requirements set out by the letter to Gassco dated 3 December 2008 to evaluate possibilities to integrate existing Naturkraft's power plant with the Kaarstoe gas processing plant. In this Naturkraft Integration Study report Gassco has identified potential degrees of integration and resulting impact with respect to performance of both the Naturkraft power plant and the Kaarstoe gas processing plant. A major concern related to operations of the Kaarstoe gas processing plant is the regularity and availability issues related to natural gas and NGL export. The value of the petroleum transported over Kaarstoe on any day exceeds 200 million NOK. In addition also significant oil production will be shut down if the Kaarstoe gas processing plant is not operating. Hence the regularity of energy supply including steam is of utmost importance. The integration between Naturkraft and the gas processing plant is based on supplying energy (i.e. fuel gas, steam, heat and electricity) from Naturkraft's existing power plant, and therefore must be based on predictable and steady operations of the Naturkraft power plant. Naturkraft has only been in operation for a few weeks from the start-up of the power plant 1

Load Carrying Capacity of Metal Dowel Type Connections of Timber Structures

Science.gov (United States)

Gocál, Jozef

2014-12-01

This paper deals with the load-carrying capacity calculation of laterally loaded metal dowel type connections according to Eurocode 5. It is based on analytically derived, relatively complicated mathematical relationships, and thus it can be quite laborious for practical use. The aim is to propose a possible simplification of the calculation. Due to quite a great variability of fasteners' types and the connection arrangements, the attention is paid to the most commonly used nailed connections. There was performed quite an extensive parametric study focused on the calculation of load-carrying capacity of the simple shear and double shear plane nail connections, joining two or three timber parts of softwood or hardwood. Based on the study results, in conclusion there are presented simplifying recommendations for practical design.

The effectiveness and cost-effectiveness of an integrated cardiometabolic risk assessment and treatment program in primary care (the INTEGRATE study).

NARCIS (Netherlands)

Stol, D.; Badenbroek, I.; Hollander, M.; Nielen, M.; Schellevis, F.; Wit, N. de

2014-01-01

The effectiveness and cost-effectiveness of an integrated cardiometabolic risk assessment and treatment program in primary care (the INTEGRATE study): a stepped-wedge randomized controlled trial protocol. Rationale: The increasing prevalence of cardiometabolic disease (CMD), including cardiovascular

Review of Statistical Learning Methods in Integrated Omics Studies (An Integrated Information Science).

Science.gov (United States)

Zeng, Irene Sui Lan; Lumley, Thomas

2018-01-01

Integrated omics is becoming a new channel for investigating the complex molecular system in modern biological science and sets a foundation for systematic learning for precision medicine. The statistical/machine learning methods that have emerged in the past decade for integrated omics are not only innovative but also multidisciplinary with integrated knowledge in biology, medicine, statistics, machine learning, and artificial intelligence. Here, we review the nontrivial classes of learning methods from the statistical aspects and streamline these learning methods within the statistical learning framework. The intriguing findings from the review are that the methods used are generalizable to other disciplines with complex systematic structure, and the integrated omics is part of an integrated information science which has collated and integrated different types of information for inferences and decision making. We review the statistical learning methods of exploratory and supervised learning from 42 publications. We also discuss the strengths and limitations of the extended principal component analysis, cluster analysis, network analysis, and regression methods. Statistical techniques such as penalization for sparsity induction when there are fewer observations than the number of features and using Bayesian approach when there are prior knowledge to be integrated are also included in the commentary. For the completeness of the review, a table of currently available software and packages from 23 publications for omics are summarized in the appendix.

Integrated Project Management: A Case Study in Integrating Cost, Schedule, Technical, and Risk Areas

Science.gov (United States)

Smith, Greg

2004-01-01

This viewgraph presentation describes a case study as a model for integrated project management. The ISS Program Office (ISSPO) developed replacement fluid filtration cartridges in house for the International Space Station (ISS). The presentation includes a step-by-step procedure and organizational charts for how the fluid filtration problem was approached.

Integrability and soliton in a classical one dimensional site dependent biquadratic Heisenberg spin chain and the effect of nonlinear inhomogeneity

International Nuclear Information System (INIS)

Kavitha, L.; Daniel, M.

2002-07-01

The integrability of one dimensional classical continuum inhomogeneous biquadratic Heisenberg spin chain and the effect of nonlinear inhomogeneity on the soliton of an underlying completely integrable spin model are studied. The dynamics of the spin system is expressed in terms of a higher order generalized nonlinear Schroedinger equation through a differential geometric approach which becomes integrable for a particular choice of the biquadratic exchange interaction and for linear inhomogeneity. The effect of nonlinear inhomogeneity on the spin soliton is studied by carrying out a multiple scale perturbation analysis. (author)

The Academic Study of Religions and Integrative Religious Education in Europe

Science.gov (United States)

Alberts, Wanda

2010-01-01

The article provides an overview of the book "Integrative religious education in Europe: A study-of-religions approach" (2007). It introduces the notion of "integrative religious education (RE)", relating to education about different religions in religiously mixed classrooms, as opposed to separative confessional approaches.…

Training to Increase Safe Tray Carrying Among Cocktail Servers

OpenAIRE

Scherrer, Megan D; Wilder, David A

2008-01-01

We evaluated the effects of training on proper carrying techniques among 3 cocktail servers to increase safe tray carrying on the job and reduce participants' risk of developing musculoskeletal disorders. As participants delivered drinks to their tables, their finger, arm, and neck positions were observed and recorded. Each participant received individual safety training that focused on proper carrying positions and techniques after baseline data were collected. A multiple baseline design acr...

Residents' perceptions of an integrated longitudinal curriculum: a qualitative study.

Science.gov (United States)

Lubitz, Rebecca; Lee, Joseph; Hillier, Loretta M

2015-01-01

The purpose of this study was to explore family medicine residents' perceptions of a newly restructured integrated longitudinal curriculum. A purposeful sample of 16 family medicine residents participated in focus group interviews conducted from a grounded theory perspective to identify the characteristics of this training model that contribute to and that challenge learning. Eight key themes were identified: continuity of care, relevance to family medicine, autonomy, program-focused preparation, professional development as facilitated by role modeling, patient volume, clarity of expectations for learners, and logistics. Positive learning experiences were marked by high levels of autonomy, continuity, and relevance to family medicine. Less favorable learning experiences were characterized by limited opportunities for continuity of care, limited relevance to family medicine practice and unclear expectations for the resident's role. Family physician-led learning experiences contributed to residents' understanding of the full scope of family medicine practice, more so than specialist-led experiences. The logistics of implementing the integrated block were challenging and negatively impacted continuity and learning. This study suggests that an integrated longitudinalized family medicine block training model has the potential to support the principles of a longitudinal integrated competency-based curriculum to effectively prepare residents for family medicine practice.

Generation of induced pluripotent stem cells (iPSCs) from an Alzheimer's disease patient carrying an A79V mutation in PSEN1

DEFF Research Database (Denmark)

Li, Tong; Pires, Carlota; Nielsen, Troels Tolstrup

2016-01-01

Skin fibroblasts were obtained from a 48-year-old presymptomatic woman carrying a A79V mutation in the presenilin 1 gene (PSEN1), causing Alzheimer's disease (AD). Induced pluripotent stem cell (iPSCs) were derived via transfection with episomal vectors carrying hOCT4, hSOX2, hKLF2, hL-MYC, hLIN28...... and shTP53 genes. A79V-iPSCs were free of genomically integrated reprogramming genes, had the specific mutation but no additional genomic aberrancies, expressed the expected pluripotency markers and displayed in vitro differentiation potential to the three germ layers. The reported A79V-iPSCs line may...

Generation of induced pluripotent stem cells (iPSCs) from an Alzheimer's disease patient carrying a M146I mutation in PSEN1

DEFF Research Database (Denmark)

Li, Tong; Pires, Carlota; Nielsen, Troels Tolstrup

2016-01-01

Skin fibroblasts were obtained from a 46-year-old symptomatic man carrying a M146I mutation in the presenilin 1 gene (PSEN1), responsible for causing Alzheimer's disease (AD). Induced pluripotent stem cells (iPSCs) were derived via transfection with episomal vectors carrying hOCT4, hSOX2, hKLF2, h......L-MYC, hLIN28 and shTP53 genes. M146I-iPSCs were free of genomically integrated reprogramming genes, had the specific mutation but no additional genomic aberrancies, expressed the expected pluripotency markers and displayed in vitro differentiation potential to the three germ layers. The reported M146I...

Core indicators evaluation of effectiveness of HIV-AIDS preventive-control programmes carried out by nongovernmental organizations. A mixed method study

Directory of Open Access Journals (Sweden)

Mansilla Rosa

2011-07-01

Full Text Available Abstract Background The number of nongovernmental organizations working on AIDS has grown. There is great diversity in the type of activities and population groups that have been targeted. The purposes of this study are: to describe and analyze the objectives and HIV-AIDS preventive activities that are carried out by the AIDS-NGOs that work with AIDS in Catalonia and that receive subsidies from the Department of Health; and to develop a comprehensive proposal for measurable and agreed upon core quality evaluation indicators to monitor and assess those objectives and activities that can have an impact on the fight against inequalities and stigmatization, and incorporate the perspectives of the service providers and users. Methods A mixed method study has been carried out with professionals from the 36 NGOs that work with HIV/AIDS in Catalonia, as well as their users. This study achieved the completeness model using the following phases: 1. A systematic review of AIDS-NGOs annual reports and preparation of a catalogue of activities grouped by objectives, level of prevention and AIDS-NGOs target population; 2. A transversal study through an ad-hoc questionnaire administered to the AIDS-NGOs representatives; 3. A qualitative study with a phenomenological approach through focus groups, individual interviews and observations; 4. Consensus meetings between AIDS-NGOs professionals and the research team using Haddon matrices in order to establish a proposal of evaluation indicators. Results The information was classified according to level of prevention and level of intervention. A total of 248 objectives and 258 prevention activities were identified. 1564 evaluation indicators, addressed to 7 target population groups, were produced. Thirty core activities were selected. The evaluation indicators proposed for these activities were: 76 indicators for 15 primary prevention activities, 43 for 5 secondary prevention activities and 68 for 10 tertiary

Core indicators evaluation of effectiveness of HIV-AIDS preventive-control programmes carried out by nongovernmental organizations. A mixed method study.

Science.gov (United States)

Berenguera, Anna; Pujol-Ribera, Enriqueta; Violan, Concepció; Romaguera, Amparo; Mansilla, Rosa; Giménez, Albert; Ascaso, Carlos; Almeda, Jesús

2011-07-28

The number of nongovernmental organizations working on AIDS has grown. There is great diversity in the type of activities and population groups that have been targeted. The purposes of this study are: to describe and analyze the objectives and HIV-AIDS preventive activities that are carried out by the AIDS-NGOs that work with AIDS in Catalonia and that receive subsidies from the Department of Health; and to develop a comprehensive proposal for measurable and agreed upon core quality evaluation indicators to monitor and assess those objectives and activities that can have an impact on the fight against inequalities and stigmatization, and incorporate the perspectives of the service providers and users. A mixed method study has been carried out with professionals from the 36 NGOs that work with HIV/AIDS in Catalonia, as well as their users. This study achieved the completeness model using the following phases:1. A systematic review of AIDS-NGOs annual reports and preparation of a catalogue of activities grouped by objectives, level of prevention and AIDS-NGOs target population; 2. A transversal study through an ad-hoc questionnaire administered to the AIDS-NGOs representatives; 3. A qualitative study with a phenomenological approach through focus groups, individual interviews and observations; 4. Consensus meetings between AIDS-NGOs professionals and the research team using Haddon matrices in order to establish a proposal of evaluation indicators. The information was classified according to level of prevention and level of intervention. A total of 248 objectives and 258 prevention activities were identified. 1564 evaluation indicators, addressed to 7 target population groups, were produced. Thirty core activities were selected. The evaluation indicators proposed for these activities were: 76 indicators for 15 primary prevention activities, 43 for 5 secondary prevention activities and 68 for 10 tertiary prevention activities. The results could help to homogeneously

Analysis of Carrying Capacity of Agro-Ecosystem Coconut-Cattle in South Minahasa Regency

Directory of Open Access Journals (Sweden)

AHS Salendu

2012-01-01

Full Text Available Abstract. Coconut plantation is very dominating in South Minahasa regency seen from its production of 49,907.33 tons in 2010. The land under coconut trees can be used for food crops or forage. The waste from food crops is the source of animal feed, while the livestock’s manure is used to improve soil fertility under coconut tree. The research objective was to analyse the carrying capacity of the agro-ecosystem of coconut-cattle. Regency and district were determined purposively. A total of 86 farmers as respondents were determined based on the ownership of at least 2 cattle and cattle selling experience. Data were analyzed using effective potential of livestock development and land capability index (IDD. The result showed that the maximum potential of land resources (PMSL was 30,872.94 animal unit (AU. The capacity increase in cattle population based on the soil resources was 18,208.94 AU. The maximum potential based on farmer house holds was 127,023.00 AU. The value of land capability index was 2.14. The conclusion was South Minahasa Regency was still potential for cattle development regarding land resources or workforce potentials. Development of cattle can be integrated with the coconut to maintain and improve agro-ecosystem sustainability of coconut plantation. Keywords: cattle, carrying capacity, agro-ecosystem, coconut Animal Production 14(1:56-62, January 2012

Integrated marketing sphere of physical culture and sports in terms of European integration Regional Center Research

Directory of Open Access Journals (Sweden)

Oleksandr Popov

2015-06-01

Full Text Available Purpose: exposure of conceptual and strategic positions of the complex marketing of sphere of physical culture and sport in the conditions of European integration of regional center. Material and Methods: analysis of literary sources, analysis of documents of legislative, normatively-legal and programmatic maintenance, analysis of the systems, questioning as a questionnaire. Results: the analysis of the systems of terms of development of sphere of physical culture and sport is carried out by the study of modern tendencies, interests of young people and habitants of regional center; complex description of conceptual and strategic positions of the relatively complex marketing of sphere of physical culture and sport is presented in the conditions of European integration of regional center. Conclusions: it is set that the decision of tasks in relation to conditioning for development of sphere of physical culture and sport must come true with the observance of certain principles; got founding in relation to development of marketing plan of forming of sporting image Kharkiv.

Water ecological carrying capacity of urban lakes in the context of rapid urbanization: A case study of East Lake in Wuhan

Science.gov (United States)

Ding, Lei; Chen, Kun-lun; Cheng, Sheng-gao; Wang, Xu

With the excessive development of social economy, water scarcity and water environment deterioration become a common phenomenon in metropolis. As a crucial component of urban water environment system, urban lake is mainly influenced by social economic system and tourism system. In this paper, a framework for quantitatively evaluating development sustainability of urban lake was established by a multi-objective model that represented water ecological carrying capacity (WECC). And nine key indicators including population, irrigation area, tourist quantity, the average number of hotel daily reception, TP, TN, CODMn, BOD5 were chosen from urban social-economy system and natural resilience aspects, with their index weight was determined by using the Structure Entropy Weight method. Then, we took Wuhan East Lake, the largest urban lake in China as a case study, and selected five time sections including 2002, 2004, 2007, 2009 and 2012 to synthetically evaluate and comparatively analyze the dynamic change of WECC. The results showed that: firstly, the water ecological carrying capacity values of the East Lake in five time sections were 1.17, 1.07, 1.64, 1.53 and 2.01 respectively, which all exceeded 1 and increased fluctuation. The rapid growth of population and GDP lead to sharply increasing demand for water quantity. However, a large amount of the domestic sewage and industrial waste led by economic development increases pressure on ecological environment of urban lakes. Secondly, the carrying capacity of the East Lake for tourist activities was still low. The value in 2012 was only 0.22, keeping at a slowly increasing phase, which indicates that the East Lake has large opportunity and space for developing the water resource carrying capacity and could make further efforts to attract tourists. Moreover, the WECC of the East Lake was mainly affected by rapid social and economic development and water environment damage caused by organic pollutants. From the view of urban

Performance of women with fibromyalgia in walking up stairs while carrying a load

Directory of Open Access Journals (Sweden)

Daniel Collado-Mateo

2016-02-01

Full Text Available Background. Fibromyalgia is a chronic disease characterized by widespread pain and other associated symptoms. It has a relevant impact on physical fitness and the ability to perform daily living tasks. The objective of the study was to analyze the step-by-step-performance and the trunk tilt of women with fibromyalgia in the 10-step stair climbing test compared with healthy controls. Methods. A cross-sectional study was carried out. Twelve women suffering from fibromyalgia and eight healthy controls were recruited from a local association. Participants were asked to climb 10 stairs without carrying a load and 10 stairs carrying a load of 5 kg in each hand. Mediolateral trunk tilt was assessed using the “Functional Assessment of Biomechanics (FAB” wireless motion capture device, and the time between steps was assessed via weight-bearing insoles. Results. Trunk tilt in the stair-climbing task carrying a load was significantly higher in women with fibromyalgia when compared to the healthy controls (2.31 (0.63 vs. 1.69 (0.51 respectively. The effect of carrying a load was significantly higher for women with fibromyalgia compared with healthy controls at the intermediate and final part of the task. Discussion. Trunk tilt during stair climbing while carrying a load was higher in women with FM, which could increase the risk of falling. Additionally, women with FM experienced a higher pace slowdown as a consequence of the load, which supports the need of including specific strength and resistance training to physical therapies for this population.

Performance of women with fibromyalgia in walking up stairs while carrying a load.

Science.gov (United States)

Collado-Mateo, Daniel; Adsuar, José C; Olivares, Pedro R; Dominguez-Muñoz, Francisco J; Maestre-Cascales, Cristina; Gusi, Narcis

2016-01-01

Background. Fibromyalgia is a chronic disease characterized by widespread pain and other associated symptoms. It has a relevant impact on physical fitness and the ability to perform daily living tasks. The objective of the study was to analyze the step-by-step-performance and the trunk tilt of women with fibromyalgia in the 10-step stair climbing test compared with healthy controls. Methods. A cross-sectional study was carried out. Twelve women suffering from fibromyalgia and eight healthy controls were recruited from a local association. Participants were asked to climb 10 stairs without carrying a load and 10 stairs carrying a load of 5 kg in each hand. Mediolateral trunk tilt was assessed using the "Functional Assessment of Biomechanics (FAB)" wireless motion capture device, and the time between steps was assessed via weight-bearing insoles. Results. Trunk tilt in the stair-climbing task carrying a load was significantly higher in women with fibromyalgia when compared to the healthy controls (2.31 (0.63) vs. 1.69 (0.51) respectively). The effect of carrying a load was significantly higher for women with fibromyalgia compared with healthy controls at the intermediate and final part of the task. Discussion. Trunk tilt during stair climbing while carrying a load was higher in women with FM, which could increase the risk of falling. Additionally, women with FM experienced a higher pace slowdown as a consequence of the load, which supports the need of including specific strength and resistance training to physical therapies for this population.

The integration of FMEA with other problem solving tools: A review of enhancement opportunities

Science.gov (United States)

Ng, W. C.; Teh, S. Y.; Low, H. C.; Teoh, P. C.

2017-09-01

Failure Mode Effect Analysis (FMEA) is one the most effective and accepted problem solving (PS) tools for most of the companies in the world. Since FMEA was first introduced in 1949, practitioners have implemented FMEA in various industries for their quality improvement initiatives. However, studies have shown that there are drawbacks that hinder the effectiveness of FMEA for continuous quality improvement from product design to manufacturing. Therefore, FMEA is integrated with other PS tools such as inventive problem solving methodology (TRIZ), Quality Function Deployment (QFD), Root Cause Analysis (RCA) and seven basic tools of quality to address the drawbacks. This study begins by identifying the drawbacks in FMEA. A comprehensive literature review on the integration of FMEA with other tools is carried out to categorise the integrations based on the drawbacks identified. The three categories are inefficiency of failure analysis, psychological inertia and neglect of customers’ perspective. This study concludes by discussing the gaps and opportunities in the integration for future research.

Enhancing tissue integration and angiogenesis of a novel nanocomposite polymer using plasma surface polymerisation, an in vitro and in vivo study.

Science.gov (United States)

Griffin, Michelle F; Palgrave, Robert G; Seifalian, Alexander M; Butler, Peter E; Kalaskar, Deepak M

2016-01-01

Current surgical reconstruction of facial defects including nose or ear involves harvesting patient's own autologous tissue, causing donor site morbidity and is limited by tissue availability. The use of alternative synthetic materials is also limited due to complications related to poor tissue integration and angiogenesis, which lead to extrusion of implants and infection. We intend to meet this clinical challenge by using a novel nanocomposite called polyhedral oligomeric silsesquioxane poly(carbonate-urea)urethane (POSS-PCU), which has already been successfully taken to the clinical bench-side as a replacement for trachea, tear duct and vascular by-pass graft. In this study, we aimed to enhance tissue integration and angiogenesis of POSS-PCU using an established surface treatment technique, plasma surface polymerisation (PSP), functionalising the surface using NH2 and COOH chemical groups. Physical characterisation of scaffolds was achieved by using a number of techniques, including water contact angle, SEM, AFM and XPS to study the effects of PSM modification on the POSS-PCU nanocomposite in detail, which has not been previously documented. Wettability evaluation confirmed that scaffolds become hydrophilic and AFM analysis confirmed that nano topographical alterations resulted as a consequence of PSP treatment. Chemical functionalisation was confirmed using XPS, which suggested the presence of NH2 and COOH functional groups on the scaffolds. The modified scaffolds were then tested both in vitro and in vivo to investigate the potential of PSP modified POSS-PCU scaffolds on tissue integration and angiogenesis. In vitro analysis confirmed that PSM modification resulted in higher cellular growth, proliferation and ECM production as assessed by biochemical assays and immunofluorescence. Subcutaneous implantation of modified POSS-PCU scaffolds was then carried out over 12-weeks, resulting in enhanced tissue integration and angiogenesis (p < 0.05). This study

An IoT-enabled supply chain integration framework : empirical case studies

OpenAIRE

Wakenshaw, Susan Y. L.; Maple, Carsten; Chen, Daqiang; Micillo, Rosario

2017-01-01

Supply chain integration is crucial for supply chain performance, particularly in industry 4.0. With the proliferation of Internet of Things (IoT) and the use of cyber-physical systems, supply chain integration needs to be greatly enhanced. In this paper, we explore supply integration (process and application) in the supply chain network enabled by IoT. Using the case study method, we investigate technical and business applications of IoT in supply chains and how it can interface with the pro...

Simplification of Process Integration Studies in Intermediate Size Industries

DEFF Research Database (Denmark)

Dalsgård, Henrik; Petersen, P. M.; Qvale, Einar Bjørn

2002-01-01

associated with a given process integration study in an intermediate size industry. This is based on the observation that the systems that eventually result from a process integration project and that are economically and operationally most interesting are also quite simple. Four steps that may be used......It can be argued that the largest potential for energy savings based on process integration is in the intermediate size industry. But this is also the industrial scale in which it is most difficult to make the introduction of energy saving measures economically interesting. The reasons......' and therefore lead to non-optimal economic solutions, which may be right. But the objective of the optimisation is not to reach the best economic solution, but to relatively quickly develop the design of a simple and operationally friendly network without losing too much energy saving potential. (C) 2002...

The Western Wind and Solar Integration Study Phase 2

Energy Technology Data Exchange (ETDEWEB)

Lew, Debra [National Renewable Energy Lab. (NREL), Golden, CO (United States); Brinkman, Greg [National Renewable Energy Lab. (NREL), Golden, CO (United States); Ibanez, E. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Florita, A. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Heaney, M. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Hodge, B. -M. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Hummon, M. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Stark, G. [National Renewable Energy Lab. (NREL), Golden, CO (United States); King, J. [RePPAE; Lefton, S. A. [Intertek-APTECH, Houston, TX (United States); Kumar, N. [Intertek-APTECH, Houston, TX (United States); Agan, D. [Intertek-APTECH, Houston, TX (United States); Jordan, G. [GE Energy, Fairfield, CT (United States); Venkataraman, S. [GE Energy, Fairfield, CT (United States)

2013-09-01

The electric grid is a highly complex, interconnected machine, and changing one part of the grid can have consequences elsewhere. Adding wind and solar affects the operation of the other power plants and adding high penetrations can induce cycling of fossil-fueled generators. Cycling leads to wear-and-tear costs and changes in emissions. Phase 2 of the Western Wind and Solar Integration Study (WWSIS-2) evaluated these costs and emissions and simulated grid operations for a year to investigate the detailed impact of wind and solar on the fossil-fueled fleet. This built on Phase 1, one of the largest wind and solar integration studies ever conducted, which examined operational impacts of high wind and solar penetrations in the West(GE Energy 2010).

The Western Wind and Solar Integration Study Phase 2

Energy Technology Data Exchange (ETDEWEB)

Lew, D.; Brinkman, G.; Ibanez, E.; Hodge, B. M.; Hummon, M.; Florita, A.; Heaney, M.

2013-09-01

The electric grid is a highly complex, interconnected machine, and changing one part of the grid can have consequences elsewhere. Adding wind and solar affects the operation of the other power plants and adding high penetrations can induce cycling of fossil-fueled generators. Cycling leads to wear-and-tear costs and changes in emissions. Phase 2 of the Western Wind and Solar Integration Study (WWSIS-2) evaluated these costs and emissions and simulated grid operations for a year to investigate the detailed impact of wind and solar on the fossil-fueled fleet. This built on Phase 1, one of the largest wind and solar integration studies ever conducted, which examined operational impacts of high wind and solar penetrations in the West.

Microearthquake studies in Egypt carried out by the geological survey of Egypt

Science.gov (United States)

Boulos, Fouad K.; Morgan, Paul; Toppozada, Tousson R.

1987-07-01

Extensive microearthquake studies have been conducted in Egypt as a joint project between scientists from the Egyptian Geological Survey and Mining Authority (EGSMA) and U.S. scientists. At this stage, a great part of the data has been analyzed and two intensively active areas have been located: one in the Abu Dabbab area of the Eastern Desert, the second at the mouth of the Gulf of Suez near Gubal Island (Daggett et al., 1980). Both sites have been reported to be the epicenters of large earthquakes in 1955 and 1969, respectively. A few scattered earthquakes have also been located in the northern part of the Red Sea, some of which lie along its median axis (Daggett et al., 1986) adding to evidence for the medial opening of the northern Red Sea. After the occurrence of an earthquake (M = 5.5) in the Aswan region on 14 November 1981, continuous recording of the many aftershocks was carried out by EGSMA for about seven months from December 1981 to July 1982, when the temporary network was replaced by a network of telemetered seismographs installed and operated by Helwan Institute of Astronomy and Geophysics in cooperation with scientists from Lamont and Doherty Geological Observatory (LDGO). The majority of epicenters are concentrated in the vicinity of G. Marawa about 65 km upstream of Aswan Dam, along the E-W Kalabsha fault. The observed focal mechanism is consistent with a right-lateral strike-slip motion on the Kalabsha fault. Analysis of Aswan microearthquakes has been done by EGSMA in cooperation with scientists from California Division of Mines and Geology (CDMG).

General arrangement and systems integration of the BPX

International Nuclear Information System (INIS)

Brown, T.G.; Mueller, J.P.; Shampinato, P.T.

1992-01-01

This paper reports on the integration of Burning Plasma Experiment (BPX) tokamak components, peripheral equipment, service lines, and the test cell facility which are being carried out to satisfy the functional requirements of all systems, maximize hands-on maintenance of peripheral equipment, and maximize access space around the machine for remote maintenance. The test cell configuration provides a center cell to house the tokamak device, close-in North and South Cells for locating peripheral equipment for hands-on maintenance and trenches are located in the test cell floor to carry away service lines to East, West, and South Diagnostic Areas. Equipment lines that service the device core components have been integrated in the design of the cryostat and locally arranged to maximize remote maintenance access to the device core and center cell peripheral equipment. a circular pipe corridor has been located in the basement to localize floor penetrations, prevent activation of the basement, and provide support structure directly under the machine. These and other configurational design details have been developed in the process of fully integrating all BPX systems and subsystems

Western Wind and Solar Integration Study: Phase 2 (Presentation)

Energy Technology Data Exchange (ETDEWEB)

Lew, D.; Brinkman, G.; Ibanez, E.; Lefton, S.; Kumar, N.; Venkataraman, S.; Jordan, G.

2013-09-01

This presentation summarizes the scope and results of the Western Wind and Solar Integration Study Phase 2, which examined operational impacts of high penetrations of variable renewable generation in the West.

Review of annual radioecological studies carried out since 1991 in the French nuclear power plants environment

International Nuclear Information System (INIS)

Duffa, C.; Gontier, G.; Renaud, P.

2004-01-01

Since 1991, the IRSN carries out annual radioecological studies in the environment of the French Nuclear Power Plants. More than 5,000 samples, collected in terrestrial and aquatic ecosystems around the 20 studied plants, have been analysed by low-level gamma spectrometry. This paper presents the main goals and methods for such studies, and the lessons learnt from 11 years results. The French NPP routine atmospheric releases do not lead to detectable radioactive inputs into their surroundings. For this reason, IRSN decided to reduce the number of analysis concerning terrestrial samples since 2000. On the other hand, NPP liquid discharges into rivers are responsible for the presence of low 60 Co, 58 Co, 110m Ag and 54 Mn activities and significant difference in 137 Cs/ 134 Cs activity ratios measured in aquatic compartments. Radioactive discharges of artificial gamma emitters are also detectable in the Channel marine environment around NPP. Nevertheless, this influence is often concealed by radionuclides released by COGEMA-La Hague nuclear reprocessing plant. Beyond important evaluations concerning the presence of artificial radionuclides in NPP's environment, studies conducted since 1991 give us an important database that can be used for a better knowledge of transfers and distribution of radioactivity through the environment. (author)

New Employees’ Integration and Orientation Management in Hotel Companies

Directory of Open Access Journals (Sweden)

Daniel Daneci-Patrau

2016-01-01

Full Text Available The significance and relevance of this topic are rendered by the complexity amplification ofactions performed by hotels in the context of developing and diversifying human resourcemanagement instruments used for the administration of economic, social and institutionalvariables. All type of evolution determines the reorganization of the human resource strategic rolewithin organizations, people being seen as the organization’s main competitive advantage overrivals. The research in this work falls under this reasoning and is a contributing factor toconsolidating information related to the integration and career guidance management of thehuman resources working in the tourism industry. The studies carried out emphasize the bestpractices in regard to the welcoming and integrating of newcomers. They also apprehend the mostefficient optimization and competitive development solutions of the hospitality trade.

Translation, adaptation and validation of "Community Integration Questionnaire"

Directory of Open Access Journals (Sweden)

Helena Maria Silveira Fraga-Maia

2015-05-01

Full Text Available Objective: To translate, adapt, and validate the "Community Integration Questionnaire (CIQ," a tool that evaluates community integration after traumatic brain injury (TBI.Methods: A study of 61 TBI survivors was carried out. The appraisal of the measurement equivalence was based on a reliability assessment by estimating inter-rater agreement, item-scale correlation and internal consistency of CIQ scales, concurrent validity, and construct validity.Results: Inter-rater agreement ranged from substantial to almost perfect. The item-scale correlations were generally higher between the items and their respective domains, whereas the intra-class correlation coefficients were high for both the overall scale and the CIQ domains. The correlation between the CIQ and Disability Rating Scale (DRS, the Extended Glasgow Outcome Scale (GOSE, and the Rancho Los Amigos Level of Cognitive Functioning Scale (RLA reached values considered satisfactory. However, the factor analysis generated four factors (dimensions that did not correspond with the dimensional structure of the original tool.Conclusion: The resulting tool herein may be useful in globally assessing community integration after TBI in the Brazilian context, at least until new CIQ psychometric assessment studies are developed with larger samples.

Studies on improved integrated membrane-based chromatographic process for bioseparation

Science.gov (United States)

Xu, Yanke

To improve protein separation and purification directly from a fermentation broth, a novel membrane filtration-cum-chromatography device configuration having a relatively impermeable coated zone near the hollow fiber module outlet has been developed. The integrated membrane filtration-cum-chromatography unit packed with chromatographic beads on the shell side of the hollow fiber unit enjoys the advantages of both membrane filtration and chromatography; it allows one to load the chromatographic media directly from the fermentation broth or lysate and separate the adsorbed proteins through the subsequent elution step in a cyclic process. Interfacial polymerization was carried out to coat the bottom section of the hollow fiber membrane while leaving the rest of the hollow fiber membrane unaffected. Myoglobin (Mb), bovine serum albumin (BSA) and a-lactalbumin (a-LA) were used as model proteins in binary mixtures. Separation behaviors of binary protein mixtures were studied in devices using either an ultrafiltration (UF) membrane or a microfiltration (MF) membrane. Experimental results show that the breakthrough time and the protein loading capacities were dramatically improved after coating in both UF and MF modules. For a synthetic yeast fermentation broth feed, the Mb and a-LA elution profiles for the four consecutive cyclic runs were almost superimposable. Due to the lower transmembrane flux in this device plus the periodical washing-elution during the chromatographic separation, fouling was not a problem as it is in conventional microfiltration. A mathematical model describing the hydrodynamic and protein loading behaviors of the integrated device using UF membrane with a coated zone was developed. The simulation results for the breakthrough agree well with the experimental breakthrough curves. The optimal length of the coated zone was obtained from the simulation. A theoretical analysis of the protein mass transfer was performed using a diffusion-convection model

Integration of Point Clouds Dataset from Different Sensors

Science.gov (United States)

Abdullah, C. K. A. F. Che Ku; Baharuddin, N. Z. S.; Ariff, M. F. M.; Majid, Z.; Lau, C. L.; Yusoff, A. R.; Idris, K. M.; Aspuri, A.

2017-02-01

Laser Scanner technology become an option in the process of collecting data nowadays. It is composed of Airborne Laser Scanner (ALS) and Terrestrial Laser Scanner (TLS). ALS like Phoenix AL3-32 can provide accurate information from the viewpoint of rooftop while TLS as Leica C10 can provide complete data for building facade. However if both are integrated, it is able to produce more accurate data. The focus of this study is to integrate both types of data acquisition of ALS and TLS and determine the accuracy of the data obtained. The final results acquired will be used to generate models of three-dimensional (3D) buildings. The scope of this study is focusing on data acquisition of UTM Eco-home through laser scanning methods such as ALS which scanning on the roof and the TLS which scanning on building façade. Both device is used to ensure that no part of the building that are not scanned. In data integration process, both are registered by the selected points among the manmade features which are clearly visible in Cyclone 7.3 software. The accuracy of integrated data is determined based on the accuracy assessment which is carried out using man-made registration methods. The result of integration process can achieve below 0.04m. This integrated data then are used to generate a 3D model of UTM Eco-home building using SketchUp software. In conclusion, the combination of the data acquisition integration between ALS and TLS would produce the accurate integrated data and able to use for generate a 3D model of UTM eco-home. For visualization purposes, the 3D building model which generated is prepared in Level of Detail 3 (LOD3) which recommended by City Geographic Mark-Up Language (CityGML).

A Study on Load Carrying Capacity of Fly Ash Based Polymer Concrete Columns Strengthened Using Double Layer GFRP Wrapping

Directory of Open Access Journals (Sweden)

S. Nagan

2014-01-01

Full Text Available This paper investigates the suitability of glass fiber reinforced polymer (GFRP sheets in strengthening of fly ash based polymer members under compression. Experimental results revealed that load carrying capacity of the confined columns increases with GFRP sheets wrapping. Altogether 18 specimens of M30 and G30 grade short columns were fabricated. The G30 specimens were prepared separately in 8 molarity and 12 molarity of sodium hydroxide concentration. Twelve specimens for low calcium fly ash based reinforced polymer concrete and six specimens of ordinary Portland cement reinforced concrete were cast. Three specimens from each molarity fly ash based reinforced polymer concrete and ordinary Portland cement reinforced concrete were wrapped with double layer of GFRP sheets. The load carrying capacity of fly ash based polymer concrete was tested and compared with control specimens. The results show increase in load carrying capacity and ductility index for all strengthened elements. The maximum increase in load carrying capacity was 68.53% and is observed in strengthened G30 specimens.

Carry-over effects of smoking cue exposure on working memory performance

Science.gov (United States)

Wilson, Stephen J.; Sayette, Michael A.; Fiez, Julie A.; Brough, Elizabeth

2009-01-01

The present study investigated the effects of drug cue exposure on working memory performance in cigarette smokers. Adult smokers (N=23) deprived for 12 hr performed a working memory task during which they were exposed to three types of task-irrelevant stimuli: Pictures containing smoking related-content, pictures devoid of smoking content, and a fixation cross. Consistent with prior research, we found that drug cue exposure affected the processing of subsequent items (i.e., carry-over effects). Specifically, we found that working memory performance was worse on trials containing neutral pictures preceded by trials containing smoking cues compared with performance on trials containing neutral pictures preceded by trials not containing smoking-related stimuli. Previously observed effects of smoking cue exposure on cognitive processing were replicated but only after removing trials subject to carry-over effects. These results replicate and extend previous research demonstrating similar effects and highlight the significant methodological and conceptual implications of carry-over effects. PMID:17454718

Integration of case study approach, project design and computer ...

African Journals Online (AJOL)

Integration of case study approach, project design and computer modeling in managerial accounting education ... Journal of Fundamental and Applied Sciences ... in the Laboratory of Management Accounting and Controlling Systems at the ...

How job demands affect partners' experience of exhaustion : integrating work-family conflict and crossover theory

NARCIS (Netherlands)

Bakker, A.B.; Demerouti, E.; Dollard, M.F.

2008-01-01

This study among 168 couples of dual-earner parents uses insights from previous work-family conflict and crossover research to propose an integrative model delineating how job demands experienced by men and women carry over to the home domain. The authors hypothesized that for both men and women,

Final inform of the studies carried out by the Geological Institute of Uruguay in the zone of Paso Severino of Santa Lucia small river

International Nuclear Information System (INIS)

1973-01-01

This inform is about the geological conditions study carried out in Paso Severino zone of the Santa Lucia small river to make a dam to provide water to Montevideo. The techniques used were photo interpretation and general geological studies.

Aerodynamic Improvements to Cargo Carrying Rail Cars due to Roof Modifications

Science.gov (United States)

Condie, Robert; Maynes, Daniel

2012-11-01

The aerodynamic drag associated with the transport of commodities by rail is becoming increasingly important as the cost of diesel fuel increases. We provide an assessment of the influence of the roof structure on aerodynamic performance of two dissimilar rail cars, namely automobile carrying cars and coal carrying cars. Currently, the roof material for automobile carrying rail cars is corrugated steel, with the corrugation aligned perpendicular to the direction of travel. Coal cars are currently left uncovered for loading convenience and on the return leg from the power plant are empty. Aerodynamic drag data have been obtained through wind tunnel testing on 1/29 scale models to understand the savings that may be realized by judicious modification to the tops of both these car types. For the automobile-carrying cars, testing is performed for the corrugated and smooth roof configurations. This modification alone has the potential of reducing the car drag coefficient by nominally 25%. A broader study is performed for the coal cars, with data being acquired for coal filled models, empty models, and several cover prototype configurations. The results reveal that implementation of a cover may yield reductions in the aerodynamic drag for both coal filled (nominally 7%) and empty coal cars (nominally 30%).

Integrating Study Skills and Problem Solving into Remedial Mathematics

Science.gov (United States)

Cornick, Jonathan; Guy, G. Michael; Beckford, Ian

2015-01-01

Students at a large urban community college enrolled in seven classes of an experimental remedial algebra programme, which integrated study skills instruction and collaborative problem solving. A control group of seven classes was taught in a traditional lecture format without study skills instruction. Student performance in the course was…

Quantifying an Integral Ecology Framework: A Case Study of the Riverina, Australia

Science.gov (United States)

Wheeler, Sarah A.; Haensch, Juliane; Edwards, Jane; Schirmer, Jackie; Zuo, Alec

2018-02-01

Communities in Australia's Murray-Darling Basin face the challenge of trying to achieve social, economic, and environmental sustainability; but experience entrenched conflict about the best way to achieve a sustainable future, especially for small rural communities. Integral ecology is a philosophical concept that seeks to address community, economic, social, and environmental sustainability simultaneously. Its inclusive processes are designed to reduce stakeholder conflict. However, to date the application of the integral ecology concept has been largely qualitative in nature. This study developed a quantitative integral ecology framework, and applied this framework to a case study of the Riverina, in the Murray-Darling Basin. Seventy-seven community-focused initiatives were assessed, ranked, and quantified. The majority of the community-focused ranked initiatives did not exhibit all aspects of integral ecology. Initiatives typically prioritized either (1) economic and community development or (2) environmental health; rarely both together. The integral ecology framework developed here enables recommendations on future community initiatives and may provide a pathway for community leaders and other policy-makers to more readily apply integral ecology objectives. Further research refining the framework's operationalization, application and implementation to a wider-scale may enhance communities' capacity to develop and grow sustainably.

Comparative study of plans for integrated residue management of construction: an analysis documental

OpenAIRE

Júnior, Jorge Henrique e Silva; Vieira, Elizângela de Jesus Oliveira de Sousa; Monte, Maria José Soares; Carvalho, Moisés Lopes; Oliveira, Francílio de Carvalho; Carvalho, Jancineide Oliveira de

2013-01-01

Objective: The present study is a comparative study of integrated plans in four cities, highlighting the points that are in accordance with Resolution 307/2002 of CONAMA. Methods: This is a bibliographic and documentary research as having scientific articles sources Plans and Integrated Solid Waste Management Construction of five Brazilian cities: Curitiba, Cuiaba, Florianopolis, Rio de Janeiro and São Paulo. Results: The resolution foresees the Integrated Management of Residues Plan for Cons...

Diagnostic study, design and implementation of an integrated model of care in France: a bottom-up process with continuous leadership

Directory of Open Access Journals (Sweden)

Matthieu de Stampa

2010-02-01

Full Text Available Background: Sustaining integrated care is difficult, in large part because of problems encountered securing the participation of health care and social service professionals and, in particular, general practitioners (GPs. Purpose: To present an innovative bottom-up and pragmatic strategy used to implement a new integrated care model in France for community-dwelling elderly people with complex needs. Results: In the first step, a diagnostic study was conducted with face-to-face interviews to gather data on current practices from a sample of health and social stakeholders working with elderly people. In the second step, an integrated care model called Coordination Personnes Agées (COPA was designed by the same major stakeholders in order to define its detailed characteristics based on the local context. In the third step, the model was implemented in two phases: adoption and maintenance. This strategy was carried out by a continuous and flexible leadership throughout the process, initially with a mixed leadership (clinician and researcher followed by a double one (clinician and managers of services in the implementation phase. Conclusion: The implementation of this bottom-up and pragmatic strategy relied on establishing a collaborative dynamic among health and social stakeholders. This enhanced their involvement throughout the implementation phase, particularly among the GPs, and allowed them to support the change practices and services arrangements

An efficient tool for metabolic pathway construction and gene integration for Aspergillus niger.

Science.gov (United States)

Sarkari, Parveen; Marx, Hans; Blumhoff, Marzena L; Mattanovich, Diethard; Sauer, Michael; Steiger, Matthias G

2017-12-01

Metabolic engineering requires functional genetic tools for easy and quick generation of multiple pathway variants. A genetic engineering toolbox for A. niger is presented, which facilitates the generation of strains carrying heterologous expression cassettes at a defined genetic locus. The system is compatible with Golden Gate cloning, which facilitates the DNA construction process and provides high design flexibility. The integration process is mediated by a CRISPR/Cas9 strategy involving the cutting of both the genetic integration locus (pyrG) as well as the integrating plasmid. Only a transient expression of Cas9 is necessary and the carrying plasmid is readily lost using a size-reduced AMA1 variant. A high integration efficiency into the fungal genome of up to 100% can be achieved, thus reducing the screening process significantly. The feasibility of the approach was demonstrated by the integration of an expression cassette enabling the production of aconitic acid in A. niger. Copyright © 2017 Elsevier Ltd. All rights reserved.

On monotonic solutions of an integral equation of Abel type

International Nuclear Information System (INIS)

Darwish, Mohamed Abdalla

2007-08-01

We present an existence theorem of monotonic solutions for a quadratic integral equation of Abel type in C[0, 1]. The famous Chandrasekhar's integral equation is considered as a special case. The concept of measure of noncompactness and a fi xed point theorem due to Darbo are the main tools in carrying out our proof. (author)

Integrated strain array for cellular mechanobiology studies

International Nuclear Information System (INIS)

Simmons, C S; Sim, J Y; Baechtold, P; Chung, C; Borghi, N; Pruitt, B L; Gonzalez, A

2011-01-01

We have developed an integrated strain array for cell culture enabling high-throughput mechano-transduction studies. Biocompatible cell culture chambers were integrated with an acrylic pneumatic compartment and microprocessor-based control system. Each element of the array consists of a deformable membrane supported by a cylindrical pillar within a well. For user-prescribed waveforms, the annular region of the deformable membrane is pulled into the well around the pillar under vacuum, causing the pillar-supported region with cultured cells to be stretched biaxially. The optically clear device and pillar-based mechanism of operation enables imaging on standard laboratory microscopes. Straightforward fabrication utilizes off-the-shelf components, soft lithography techniques in polydimethylsiloxane and laser ablation of acrylic sheets. Proof of compatibility with basic biological assays and standard imaging equipment were accomplished by straining C2C12 skeletal myoblasts on the device for 6 h. At higher strains, cells and actin stress fibers realign with a circumferential preference

Magnetoacoustic waves in current-carrying plasmas

International Nuclear Information System (INIS)

Brennan, M.H.

1980-04-01

The results of theoretical and experimental investigations of the characteristics of magnetoacoustic waves in non-uniform, current-carrying plasmas are reviewed. Dissipative MHD and collisionless theories are considered. Also discussed is the use of magnetoacoustic waves in plasma diagnostics and plasma heating

Integrating technology education concepts into China's educational system

Science.gov (United States)

Yang, Faxian

The problem of this study was to develop a strategy for integrating technology education concepts within the Chinese mathematics and science curricula. The researcher used a case study as the basic methodology. It included three methods for collecting data: literature review, field study in junior and senior secondary schools in America and China, and interviews with experienced educators who were familiar with the status of technology education programs in the selected countries. The data came from the following areas: Japan, Taiwan, the United Kingdom, China, and five states in the United States: Illinois, Iowa, Maryland, Massachusetts, and New York. The researcher summarized each state and country's educational data, identified the advantages and disadvantages of their current technology education program, and identified the major concepts within each program. The process determined that identified concepts would be readily acceptable into the current Chinese educational system. Modernization of, industry, agriculture, science and technology, and defense have been recent objectives of the Chinese government. Therefore, Chinese understanding of technology, or technology education, became important for the country. However, traditional thought and culture curb the implementation of technology education within China's current education system. The proposed solution was to integrate technology education concepts into China's mathematics and science curricula. The purpose of the integration was to put new thoughts and methods into the current educational structure. It was concluded that the proposed model and interventions would allow Chinese educators to carry out the integration into China's education system.

Integrating Social Studies and Ethnobotany: A Multicultural Approach.

Science.gov (United States)

Harrell, Pamela Esprivalo; Forney, Scott

2001-01-01

Describes a series of four lessons that integrate social studies, language arts, and life science for high school students. Explains that students participate in a wildflower collection activity, interview a person from another culture to collect interesting facts and wild stories, research a flowering plant, and make wildflower bookmarks. (CMK)

Integrated Energy Design of the Building Envelope

DEFF Research Database (Denmark)

Nielsen, Martin Vraa

This thesis describes the outcome of the PhD project Integrated energy design of the building envelope carried out through a combination of scientific dissemination reported through peer-reviewed journals and a wide range of affiliated projects involved in at an architectural firm. The research...

A Case Study of a Mixed Methods Study Engaged in Integrated Data Analysis

Science.gov (United States)

Schiazza, Daniela Marie

2013-01-01

The nascent field of mixed methods research has yet to develop a cohesive framework of guidelines and procedures for mixed methods data analysis (Greene, 2008). To support the field's development of analytical frameworks, this case study reflects on the development and implementation of a mixed methods study engaged in integrated data analysis.…

Integration of Intercultural Competence in the Processes of Enterprise Internationalization: Possibilities of the Adaptation of the Model in the Operation of Small and Medium Enterprises

Directory of Open Access Journals (Sweden)

Jolita Vveinhardt

2015-05-01

Full Text Available The article briefly presents the problems identified during the studies carried out by the authors previously, i.e. the problems of intercultural competence and its integration in the processes of internationalization are disclosed. On the basis of the researches carried out the model of integration of intercultural competence in the internationalization processes is adapted, preparing the plan of development of intercultural competence in enterprises. At the end of the article the guidelines for the application of the model for development of internationalization of small and medium enterprises is presented.

Process modeling for the Integrated Nonthermal Treatment System (INTS) study

Energy Technology Data Exchange (ETDEWEB)

Brown, B.W.

1997-04-01

This report describes the process modeling done in support of the Integrated Nonthermal Treatment System (INTS) study. This study was performed to supplement the Integrated Thermal Treatment System (ITTS) study and comprises five conceptual treatment systems that treat DOE contract-handled mixed low-level wastes (MLLW) at temperatures of less than 350{degrees}F. ASPEN PLUS, a chemical process simulator, was used to model the systems. Nonthermal treatment systems were developed as part of the INTS study and include sufficient processing steps to treat the entire inventory of MLLW. The final result of the modeling is a process flowsheet with a detailed mass and energy balance. In contrast to the ITTS study, which modeled only the main treatment system, the INTS study modeled each of the various processing steps with ASPEN PLUS, release 9.1-1. Trace constituents, such as radionuclides and minor pollutant species, were not included in the calculations.

Living anew - About possibilities of contemporary adaptations of flats carried out in industrialised technologies in Poland

Science.gov (United States)

Kłopotowski, Maciej

2017-10-01

Around the half of Polish population currently live in the buildings constructed in the second half of the twentieth century in industrialized technologies. Economic conditions indicate that this state will not change substantially over the next decade. This situation forces people who deal with shaping housing space to take action that will raise the value of existing, technically and morally degrading, housing substance. As a result of conducted research, the author of this study pointed out that the so-called revitalization of the housing environment is carried out at the level of residents, administrators of buildings and housing estates. Their effects are often not correlated or even contradictory. He also emphasized the importance of comprehensive measures and the need for systemic solutions that integrate legislation, administration and contracting. As an important element of these actions he pointed out the need to develop a catalogue illustrating the possibility of reconstruction of housing. The article will present the results of research aimed at developing a strategy of remodelling flats, considered today unattractive, located in buildings constructed in OW-T technology. The analyses were carried out on a group of flats (about 85 m²) completed at the turn of 70s and 80s. During the construction period they were intended to be settled by families of minimum 6 people and were the largest. Their structure consists of a number of relatively small rooms (including very small bathrooms and kitchens). The author made a critical analysis of this housing offer. He defined contemporary needs of investors who are involved in buying flats of such size - they are families with one or two children. Measurable results of the work carried out are the schemes of housing conversion plans. The article presents four specific design solutions that show the direction of possible actions. According to the author, popularizing the possibility of reconstructing such flats

Infections That Pets Carry (For Parents)

Science.gov (United States)

... how to protect your family from infections. How Pets Spread Infections Like people, all animals carry germs . Illnesses common among housepets — ... get an infection that can be passed to people. Safely Caring for Your Pet Here are some tips to help your family ...

Effect of multipurpose solutions against Acinetobacter carrying QAC genes.

Science.gov (United States)

Boost, Maureen V; Chan, Jessica; Shi, Guang-sen; Cho, Pauline

2014-03-01

Acinetobacter has low virulence but causes infections in subjects with reduced immunity. It has been reported in ocular infections including those of patients using contact lenses. Treatment is difficult because Acinetobacter is frequently multidrug resistant. Antibiotic-resistant strains frequently also harbor genes for antiseptic resistance (quaternary ammonium compound [QAC]) genes. Because Acinetobacter is part of the normal flora, it may contaminate contact lens and accessories. This study aims to investigate carriage rates of QAC genes in household and clinical isolates of Acinetobacter and to determine the effectiveness of two multipurpose solutions (MPSs) for soft lenses against organisms carrying QAC genes. DNA was extracted from 11 bathroom isolates and 15 clinical isolates and amplified by polymerase chain reaction to determine the presence of qacEΔ1. Gene-positive and gene-negative control strains were used to challenge the two MPSs, and minimum inhibitory concentrations (MICs) of these organisms to benzalkonium chloride and chlorhexidine gluconate were determined. More than 90% of isolates carried qacEΔ1. The MICs of clinical isolates were higher than those of isolates of bathrooms. Both MPSs were able to produce a 3-log reduction in the numbers of all isolates. Although most isolates carried qacEΔ1 and elevated MICs to benzalkonium chloride and chlorhexidine gluconate were observed, all were susceptible to both MPSs tested. However, if there were to be poor compliance with care procedures, it is probable that such organisms could survive in the presence of diluted or expired solutions.

Preliminary research on quantitative methods of water resources carrying capacity based on water resources balance sheet

Science.gov (United States)

Wang, Yanqiu; Huang, Xiaorong; Gao, Linyun; Guo, Biying; Ma, Kai

2018-06-01

Water resources are not only basic natural resources, but also strategic economic resources and ecological control factors. Water resources carrying capacity constrains the sustainable development of regional economy and society. Studies of water resources carrying capacity can provide helpful information about how the socioeconomic system is both supported and restrained by the water resources system. Based on the research of different scholars, major problems in the study of water resources carrying capacity were summarized as follows: the definition of water resources carrying capacity is not yet unified; the methods of carrying capacity quantification based on the definition of inconsistency are poor in operability; the current quantitative research methods of water resources carrying capacity did not fully reflect the principles of sustainable development; it is difficult to quantify the relationship among the water resources, economic society and ecological environment. Therefore, it is necessary to develop a better quantitative evaluation method to determine the regional water resources carrying capacity. This paper proposes a new approach to quantifying water resources carrying capacity (that is, through the compilation of the water resources balance sheet) to get a grasp of the regional water resources depletion and water environmental degradation (as well as regional water resources stock assets and liabilities), figure out the squeeze of socioeconomic activities on the environment, and discuss the quantitative calculation methods and technical route of water resources carrying capacity which are able to embody the substance of sustainable development.

A SURVEY ON INDIAN EXPERIENCE ON INTEGRATED MANAGEMENT STANDARDS (IMS

Directory of Open Access Journals (Sweden)

H. Khanna

2009-09-01

Full Text Available Adoption of management systems standards is a key issue in manufacturing industry in India. Following the global trend quality and environmental issues are gaining importance. However the number of ISO 14001 certified companies are much less in India as compared to ISO 9001. The integration of ISO 14001 with ISO 9001 may help companies to sustain competitive advantage and overcome disappointments with quality standards and in turn encourage companies to adopt good environmental practices. The aim of this research is to study the implementation of integrated management standards (IMS by the manufacturing organizations in India. The different aspects of integration and benefits of IMS implementation are analyzed. This r esearch is based on empirical study carried out in Indian manufacturing firms, involving the application of a questionnaire. This questionnaire was tested on 50 manufacturing companies in India. The study reveals that focus on stakeholders; top management commitment and training are critical success factors for implementation of IMS. The main benefits of integration are discussed. The small sample size is one of the major limitations of this study. The paper informs the managers in manufacturing organizations and practitioners of management system standards especially in developing countries about IMS and will enable them to adopt IMS in future so that those organizations may not implement multiple and overlapping MSS(Management System Standards.

Technical and Economic Potential of Distributed Energy Storages for the Integration of Renewable Energy

DEFF Research Database (Denmark)

Sveinbjörnsson, Dadi Þorsteinn; Trier, Daniel; Hansen, Kenneth

Very high penetration of fluctuating renewable energy sources can lead to new challenges in balancing energy supply and demand in future energy systems. This work, carried out as a part of Annex 28 of the IEA ECES programme, addresses this. The aim of the study is to identify which role decentral...... indicate that sector coupling along with an intelligent choice of distributed energy storage technologies can enable the integration of large shares of fluctuating renewable energy in an energy efficient and cost-effective way.......Very high penetration of fluctuating renewable energy sources can lead to new challenges in balancing energy supply and demand in future energy systems. This work, carried out as a part of Annex 28 of the IEA ECES programme, addresses this. The aim of the study is to identify which role...... decentralised energy storages (DES) should play in integrating fluctuating renewable energy sources. The technical and economic potential for DES solutions is quantified using energy system modelling, and it is identified which DES technologies have the largest total (technical and economic) potential. For this...

The effects of integrated care: a systematic review of UK and international evidence.

Science.gov (United States)

Baxter, Susan; Johnson, Maxine; Chambers, Duncan; Sutton, Anthea; Goyder, Elizabeth; Booth, Andrew

2018-05-10

Healthcare systems around the world have been responding to the demand for better integrated models of service delivery. However, there is a need for further clarity regarding the effects of these new models of integration, and exploration regarding whether models introduced in other care systems may achieve similar outcomes in a UK national health service context. The study aimed to carry out a systematic review of the effects of integration or co-ordination between healthcare services, or between health and social care on service delivery outcomes including effectiveness, efficiency and quality of care. Electronic databases including MEDLINE; Embase; PsycINFO; CINAHL; Science and Social Science Citation Indices; and the Cochrane Library were searched for relevant literature published between 2006 to March 2017. Online sources were searched for UK grey literature, and citation searching, and manual reference list screening were also carried out. Quantitative primary studies and systematic reviews, reporting actual or perceived effects on service delivery following the introduction of models of integration or co-ordination, in healthcare or health and social care settings in developed countries were eligible for inclusion. Strength of evidence for each outcome reported was analysed and synthesised using a four point comparative rating system of stronger, weaker, inconsistent or limited evidence. One hundred sixty seven studies were eligible for inclusion. Analysis indicated evidence of perceived improved quality of care, evidence of increased patient satisfaction, and evidence of improved access to care. Evidence was rated as either inconsistent or limited regarding all other outcomes reported, including system-wide impacts on primary care, secondary care, and health care costs. There were limited differences between outcomes reported by UK and international studies, and overall the literature had a limited consideration of effects on service users. Models of

Which coordinate system for modelling path integration?

Science.gov (United States)

Vickerstaff, Robert J; Cheung, Allen

2010-03-21

Path integration is a navigation strategy widely observed in nature where an animal maintains a running estimate, called the home vector, of its location during an excursion. Evidence suggests it is both ancient and ubiquitous in nature, and has been studied for over a century. In that time, canonical and neural network models have flourished, based on a wide range of assumptions, justifications and supporting data. Despite the importance of the phenomenon, consensus and unifying principles appear lacking. A fundamental issue is the neural representation of space needed for biological path integration. This paper presents a scheme to classify path integration systems on the basis of the way the home vector records and updates the spatial relationship between the animal and its home location. Four extended classes of coordinate systems are used to unify and review both canonical and neural network models of path integration, from the arthropod and mammalian literature. This scheme demonstrates analytical equivalence between models which may otherwise appear unrelated, and distinguishes between models which may superficially appear similar. A thorough analysis is carried out of the equational forms of important facets of path integration including updating, steering, searching and systematic errors, using each of the four coordinate systems. The type of available directional cue, namely allothetic or idiothetic, is also considered. It is shown that on balance, the class of home vectors which includes the geocentric Cartesian coordinate system, appears to be the most robust for biological systems. A key conclusion is that deducing computational structure from behavioural data alone will be difficult or impossible, at least in the absence of an analysis of random errors. Consequently it is likely that further theoretical insights into path integration will require an in-depth study of the effect of noise on the four classes of home vectors. Copyright 2009 Elsevier Ltd

The integration process of immigrants: limits and new contributions for a more comprehensive study

Directory of Open Access Journals (Sweden)

Yolanda González- Rábago

2014-02-01

Full Text Available The integration process of immigrants is a complex issue of conceptualization and extensive discussion both in the field of public policy and from the academia. The alleged European consensus about integration has only been in the comfortable speech of bidirectionality and the study of the integration process in host societies has been raised ever from quantifier and objectivist parameters that are not able to grasp the diversity of thereof. Furthermore, the study of integration has overlooked the importance of the society of origin and the link that immigrants remain with them, focusing only on the host society as a place of integration. In this paper I propose the extension of the look on the integration by incorporating the perspective of origin and the subjectivity of the immigrants as an actor with the capacity to question, decide and change the patterns and contexts in which integration occurs.

Concepts for reducing nuclear utility inventory carrying costs

International Nuclear Information System (INIS)

Graybill, R.E.; DiCola, F.E.; Solanas, C.H.

1985-01-01

Nuclear utilities are under pressure to reduce their operating and maintenance expenses such that the total cost of generating electricity through nuclear power remains an economically attractive option. One area in which expenses may be reduced is total inventory carrying cost. The total inventory carrying cost consists of financing an inventory, managing the inventory, assuring quality, engineering of acceptable parts specifications, and procuring initial and replenishment stock. Concepts and methodology must be developed to reduce the remaining expenses of a utility's total inventory carrying cost. Currently, two concepts exist: pooled inventory management system (PIMS), originally established by General Electric Company and a group of boiling water reactor owners, and Nuclear Parts Associates' (NUPA) shared inventory management program (SIMP). Both concepts share or pool parts and components among utilities. The SIMP program objectives and technical activities are summarized

Non-destructive testing and evaluation for structural integrity

International Nuclear Information System (INIS)

Baldev Raj; Jayakumar, T.; Rao, B.P.C.

1995-01-01

In this paper, a brief description of the physical concepts of non-destructive evaluation (NDE) methods and the physical/derived parameters that are used for assessing defects, stresses and microstructures are given. A few case studies highlighting the importance of non-destructive testing and evaluation for structural integrity assessment are also discussed based on the investigations carried out. Emerging concepts like intelligent processing of materials, expert systems, neural networks, use of multisensors with fusion of data and exploitation of signal analysis and imaging approaches are also addressed in this paper. (author). 92 refs., 1 tab

Estimation of carrying angle based on CT images in preoperative surgical planning for cubitus deformities

International Nuclear Information System (INIS)

Park, Shinsuk; Kim, Eugene

2009-01-01

Conventionally, the carrying angle of the elbow is measured using simple two-dimensional radiography or goniometry, which has questionable reliability. This study proposes a novel method for estimating carrying angles using computed tomography that can enhance the reliability of the angle measurement. Data of CT scans from 25 elbow joints were processed to build segmented three-dimensional models. The cross-sectional centerlines of the ulna and the humerus were traced from the 3D models, and the angle between 2 vectors formed from the centerlines of the humerus and the ulna was defined as the 'three-dimensional carrying angle.' These angles were compared with those measured by simple radiograph. Two cases of angular deformity were underwent surgery based on this preoperative surgical planning, and the postoperative 3D carrying angles were evaluated using the proposed method. The mean value of the calculated three-dimensional carrying angle was 20.7deg±3.61, while it was 16.3deg±3.21 based on simple radiography without statistical difference. Based on the 3D carrying angle estimations, 2 surgical cases of cubitus deformities were planned by comparison with the normal contra-lateral elbow. Postoperative angle estimations confirmed that the corrected angles were nearly identical to the planned angles for both cases. The results of this study showed that the carrying angle can be accurately estimated using three-dimensional CT and that the proposed method is useful in evaluating deformities of the elbow with high reliability. (author)

Elements for an integrated resource planning in the framework of river basins: a study for the Cuiaba River Basin; Elementos para um planejamento integrado de recursos no ambito de bacias hidrograficas: um estudo para a bacia do rio Cuiaba

Energy Technology Data Exchange (ETDEWEB)

Dorileo, Ivo Leandro; Bajay, Sergio Valdir [Universidade Estadual de Campinas (NIPE/UNICAMP), SP (Brazil). Nucleo Interdisciplinar de Planejamento Energetico. Dept. de Energia], e-mail: ildorileo@sigmanet.com.br, e-mail: bajay@fem.unicamp.br

2008-07-01

A new approach in energy planning in Brazil, IRP - Integrated Resources Planning for River Basins, gathers three main determinants of development: water, electricity and piped gas. This paper argues, briefly, the need of this planning, of indicative character, integrated with the River Basin Plans, and it presents a retrospective analysis concerning water, electricity and LPG demands of the economy sectors from Cuiaba River Basin region, priority elements to aid the prospective studies and to carry out process related to the IRP. (author)

Case study of the interdisciplinary integration in an IST-E3 project

DEFF Research Database (Denmark)

Jørgensen, Ulrik

2002-01-01

Case study of a specific IST-E3 project funded by the EU commissions 5th framework program. The case study highlights the difficulties in integrating different disciplinary approaches and suggests that a more openended research strategy should be applied by the commission.......Case study of a specific IST-E3 project funded by the EU commissions 5th framework program. The case study highlights the difficulties in integrating different disciplinary approaches and suggests that a more openended research strategy should be applied by the commission....

A Local Dimension of Integration Policies? A Comparative Study of Berlin, Malmö, and Rotterdam

NARCIS (Netherlands)

R. Dekker (Rianne); H. Emilsson (Henrik); B. Krieger (Bernhard); P.W.A. Scholten (Peter)

2015-01-01

textabstractThis study examines three theses on local integration policies by a qualitative comparative case study of integration policies in three cities in three different countries (Berlin, Malmö, and Rotterdam). We found little evidence of a congruent local dimension of integration policies.

Efficient integration of renewable energies in the German electricity market; Effiziente Integration erneuerbarer Energien in den deutschen Elektrizitaetsmarkt

Energy Technology Data Exchange (ETDEWEB)

Nabe, C.A.

2006-07-01

Liberalisation of the electricity sector aims to carry out coordination tasks within the system by markets and market prices. This study examines how markets need to be designed to carry out coordination tasks caused by integration of renewable energies in an efficient way. This question is applied to the German electricity system and recommendations are derived from identified deficits. The examination uses the structure-conduct-performance approach of industrial organisation economics. Integration of renewable energies does not result in entirely new coordination tasks but complicates those that exist in any electricity supply system. Within the short-term coordination tasks provision and operation of reserve capacity is affected by renewable energies. Long-term coordination means that the relation between fixed and variable costs of generators as well as generator flexibility has to be adjusted to the characteristics of renewable energies. The relevant short-term coordination task with the network is congestion management. In the long run costs of grid expansion and permanent congestion management have to be balanced. For the execution of short-run coordination tasks integrated and centralised market architectures are superior to decentralised architectures. The increase of short-term coordination tasks due to renewable energies caused by inflexibilities of consumers and conventional generators results in more information that has to be considered. By centralising that information in one market, an increase in productive efficiency can be obtained. In Germany the increased coordination tasks are determined by the integration of wind generators into the electricity system. The present German market architecture results in inefficiencies in short-term coordination. This is demonstrated by an analysis of procedural rules and prices of the ancillary service markets. They demonstrate that market performance is low and significant deviations from competitive prices

A MATHEMATICAL MODEL OF OPTIMIZATION OF THE VOLUME OF MATERIAL FLOWS IN GRAIN PROCESSING INTEGRATED PRODUCTION SYSTEMS

OpenAIRE

Baranovskaya T. P.; Loyko V. I.; Makarevich O. A.; Bogoslavskiy S. N.

2014-01-01

The article suggests a mathematical model of optimization of the volume of material flows: the model for the ideal conditions; the model for the working conditions; generalized model of determining the optimal input parameters. These models optimize such parameters of inventory management in technology-integrated grain production systems, as the number of cycles supply, the volume of the source material and financial flows. The study was carried out on the example of the integrated system of ...

Review of the integrated thermal and nonthermal treatment system studies

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-10-01

This report contains a review and evaluation of three systems analysis studies performed by LITCO on integrated thermal treatment systems and integrated nonthermal treatment systems for the remediation of mixed low-level waste stored throughout the US Department of Energy weapons complex. The review was performed by an independent team of nine researchers from the Energy and Environmental Research Center, Science Applications International Corporation, the Waste Policy Institute, and Virginia Tech. The purpose of this review was to (1) determine whether the assumptions of the studies were adequate to produce an unbiased review of both thermal and nonthermal systems, (2) to identify the critical areas of the studies that would benefit from further investigation, and (3) to develop a standard template that could be used in future studies to assure a sound application of systems engineering.

Review of the integrated thermal and nonthermal treatment system studies

International Nuclear Information System (INIS)

1996-01-01

This report contains a review and evaluation of three systems analysis studies performed by LITCO on integrated thermal treatment systems and integrated nonthermal treatment systems for the remediation of mixed low-level waste stored throughout the US Department of Energy weapons complex. The review was performed by an independent team of nine researchers from the Energy and Environmental Research Center, Science Applications International Corporation, the Waste Policy Institute, and Virginia Tech. The purpose of this review was to (1) determine whether the assumptions of the studies were adequate to produce an unbiased review of both thermal and nonthermal systems, (2) to identify the critical areas of the studies that would benefit from further investigation, and (3) to develop a standard template that could be used in future studies to assure a sound application of systems engineering

[Nursing workloads and working conditions: integrative review].

Science.gov (United States)

Schmoeller, Roseli; Trindade, Letícia de Lima; Neis, Márcia Binder; Gelbcke, Francine Lima; de Pires, Denise Elvira Pires

2011-06-01

This study reviews theoretical production concerning workloads and working conditions for nurses. For that, an integrative review was carried out using scientific articles, theses and dissertations indexed in two Brazilian databases, Virtual Health Care Library (Biblioteca Virtual de Saúde) and Digital Database of Dissertations (Banco Digital de Teses), over the last ten years. From 132 identified studies, 27 were selected. Results indicate workloads as responsible for professional weariness, affecting the occurrence of work accidents and health problems. In order to adequate workloads studies indicate some strategies, such as having an adequate numbers of employees, continuing education, and better working conditions. The challenge is to continue research that reveal more precisely the relationships between workloads, working conditions, and health of the nursing team.

Studying integrated health care systems with a structurationist approach

Science.gov (United States)

Demers, Louis; Arseneault, Stéphane; Couturier, Yves

2010-01-01

Introduction To implement an integrated health care system is not an easy task and to ensure its sustainability is yet more difficult. Aim Discuss how a structurationist approach can shed light on the stakes of these processes and guide the managers of such endeavours. Theory and method Structuration theory [1] has been used by numerous authors to cast new light on complex organizational phenomena. One of the central tenets of this theory is that social systems, such as integrated health care systems, are recurrent social practices across time-space and are characterized by structural properties which simultaneously constrain and enable the constitutive social actors who reproduce and transform the system through their practices. We will illustrate our theoretical standpoint with empirical material gathered during the study of an integrated health care system for the frail elderly in Quebec, Canada. This system has been implemented in 1997 and is still working well in 2010. Results and conclusion To implement an integrated health care system that is both effective and sustainable, its managers must shrewdly allow for the existing system and progressively introduce changes in the way managers and practitioners at work in the system view their role and act on a daily basis.

A long-period analog integrator for magnetic measurements in Tore Supra

International Nuclear Information System (INIS)

Prou, M.; Barth, E.; Couturier, P.; Ouvrier-Buffet, P.

1998-01-01

A new analog integrator, called 'Integrateur 2000', has been developed for precise integration over long periods for the magnetic signals of Tore Supra with the aim of 1000 s discharges for the CIEL project. This new integrator is already in routine use for the present pulse lengths of up to 200 s in T-S, and tests have been carried out up to 1000 s with less than 2 mV of drift. (author)

Nebraska Statewide Wind Integration Study: April 2008 - January 2010

Energy Technology Data Exchange (ETDEWEB)

EnerNex Corporation, Knoxville, Tennessee; Ventyx, Atlanta, Georgia; Nebraska Power Association, Lincoln, Nebraska

2010-03-01

Wind generation resources in Nebraska will play an increasingly important role in the environmental and energy security solutions for the state and the nation. In this context, the Nebraska Power Association conducted a state-wide wind integration study.

[Knowledge, attitudes, and practices about Carrión's disease in rural Ancash, Peru].

Science.gov (United States)

Llerena Luna, Carolina; Schweig Groisman, Maggie; Ugarte-Gil, César Augusto

2013-05-01

To assess knowledge, attitudes, and practices about Carrión's disease (bartonellosis) in rural communities with a history of epidemic outbreaks. A cross-sectional survey study was conducted in the communities of Huaripampa, Orcosh, and Opayaco (Ancash, Peru) in July 2010, to assess knowledge, attitudes, and practices about Carrión's disease. Interviewees were aged >18 years and had resided in the community for at least one year. A total of 276 residents were surveyed; 36.6% were men, and 72.5% had not heard of Carrión's disease. Of those familiar with it, most (38.7%) said that it spreads through bites, and 26% did not know how it spreads. Regarding actions to take if Carrión's disease develops, 69.3% of respondents said they would go to a health center and over half reported having recommended preventive practices to relatives or acquaintances in the past. Even though these three communities have a history of Carrión's disease, their inhabitants did not demonstrate adequate knowledge, attitudes, or practices for preventing it. In view of this, and given that this illness has cyclical outbreaks, it is imperative to design and implement a program to educate residents of these communities-focusing on the role of habits and customs-about how to prevent Carrión's disease, as well as the region's other main endemic diseases.

Integration of deeptow data for mapping of deepsea resources

Digital Repository Service at National Institute of Oceanography (India)

Sharma, R.; Jaisankar, S.; Sudhakar, M.; Ramprasad, T.

data. Mapping of nodules and other features (crusts, biological activity and sediment characteristics) was carried out by integrating the data from various sources, such as navigation, photographic and acoustic, keeping time as the reference...

Western Wind and Solar Integration Study: Hydropower Analysis

Energy Technology Data Exchange (ETDEWEB)

Acker, T.; Pete, C.

2012-03-01

The U.S. Department of Energy's (DOE) study of 20% Wind Energy by 2030 was conducted to consider the benefits, challenges, and costs associated with sourcing 20% of U.S. energy consumption from wind power by 2030. This study found that with proactive measures, no insurmountable barriers were identified to meet the 20% goal. Following this study, DOE and the National Renewable Energy Laboratory (NREL) conducted two more studies: the Eastern Wind Integration and Transmission Study (EWITS) covering the eastern portion of the U.S., and the Western Wind and Solar Integration Study (WWSIS) covering the western portion of the United States. The WWSIS was conducted by NREL and research partner General Electric (GE) in order to provide insight into the costs, technical or physical barriers, and operational impacts caused by the variability and uncertainty of wind, photovoltaic, and concentrated solar power when employed to serve up to 35% of the load energy in the WestConnect region (Arizona, Colorado, Nevada, New Mexico, and Wyoming). WestConnect is composed of several utility companies working collaboratively to assess stakeholder and market needs to and develop cost-effective improvements to the western wholesale electricity market. Participants include the Arizona Public Service, El Paso Electric Company, NV Energy, Public Service of New Mexico, Salt River Project, Tri-State Generation and Transmission Cooperative, Tucson Electric Power, Xcel Energy and the Western Area Power Administration.

The integration of occupational therapy into primary care: a multiple case study design

Science.gov (United States)

2013-01-01

Background For over two decades occupational therapists have been encouraged to enhance their roles within primary care and focus on health promotion and prevention activities. While there is a clear fit between occupational therapy and primary care, there have been few practice examples, despite a growing body of evidence to support the role. In 2010, the province of Ontario, Canada provided funding to include occupational therapists as members of Family Health Teams, an interprofessional model of primary care. The integration of occupational therapists into this model of primary care is one of the first large scale initiatives of its kind in North America. The objective of the study was to examine how occupational therapy services are being integrated into primary care teams and understand the structures supporting the integration. Methods A multiple case study design was used to provide an in-depth description of the integration of occupational therapy. Four Family Health Teams with occupational therapists as part of the team were identified. Data collection included in-depth interviews, document analyses, and questionnaires. Results Each Family Health Team had a unique organizational structure that contributed to the integration of occupational therapy. Communication, trust and understanding of occupational therapy were key elements in the integration of occupational therapy into Family Health Teams, and were supported by a number of strategies including co-location, electronic medical records and team meetings. An understanding of occupational therapy was critical for integration into the team and physicians were less likely to understand the occupational therapy role than other health providers. Conclusion With an increased emphasis on interprofessional primary care, new professions will be integrated into primary healthcare teams. The study found that explicit strategies and structures are required to facilitate the integration of a new professional group

Monitored retrievable storage (MRS) facility and salt repository integration: Engineering study report

International Nuclear Information System (INIS)

1987-07-01

This MRS Facility and Salt Repository Integration Study evaluates the impacts of an integrated MRS/Salt Repository Waste Management System on the Salt Repository Surface facilities' design, operations, cost, and schedule. Eight separate cases were studied ranging from a two phase repository design with no MRS facility to a design in which the repository only received package waste from the MRS facility for emplacement. The addition of the MRS facility to the Waste Management System significantly reduced the capital cost of the salt repository. All but one of the cases studied were capable of meeting the waste acceptance data. The reduction in the size and complexity of the Salt Repository waste handling building with the integration of the MRS facility reduces the design and operating staff requirements. 7 refs., 35 figs., 43 tabs

The path dependency theory: analytical framework to study institutional integration. The case of France.

Science.gov (United States)

Trouvé, Hélène; Couturier, Yves; Etheridge, Francis; Saint-Jean, Olivier; Somme, Dominique

2010-06-30

The literature on integration indicates the need for an enhanced theorization of institutional integration. This article proposes path dependence as an analytical framework to study the systems in which integration takes place. PRISMA proposes a model for integrating health and social care services for older adults. This model was initially tested in Quebec. The PRISMA France study gave us an opportunity to analyze institutional integration in France. A qualitative approach was used. Analyses were based on semi-structured interviews with actors of all levels of decision-making, observations of advisory board meetings, and administrative documents. Our analyses revealed the complexity and fragmentation of institutional integration. The path dependency theory, which analyzes the change capacity of institutions by taking into account their historic structures, allows analysis of this situation. The path dependency to the Bismarckian system and the incomplete reforms of gerontological policies generate the coexistence and juxtaposition of institutional systems. In such a context, no institution has sufficient ability to determine gerontology policy and build institutional integration by itself. Using path dependence as an analytical framework helps to understand the reasons why institutional integration is critical to organizational and clinical integration, and the complex construction of institutional integration in France.

Optimal Renewable Energy Integration into Refinery with CO2 Emissions Consideration: An Economic Feasibility Study

Science.gov (United States)

Alnifro, M.; Taqvi, S. T.; Ahmad, M. S.; Bensaida, K.; Elkamel, A.

2017-08-01

With increasing global energy demand and declining energy return on energy invested (EROEI) of crude oil, global energy consumption by the O&G industry has increased drastically over the past few years. In addition, this energy increase has led to an increase GHG emissions, resulting in adverse environmental effects. On the other hand, electricity generation through renewable resources have become relatively cost competitive to fossil based energy sources in a much ‘cleaner’ way. In this study, renewable energy is integrated optimally into a refinery considering costs and CO2 emissions. Using Aspen HYSYS, a refinery in the Middle East was simulated to estimate the energy demand by different processing units. An LP problem was formulated based on existing solar energy systems and wind potential in the region. The multi-objective function, minimizing cost as well as CO2 emissions, was solved using GAMS to determine optimal energy distribution from each energy source to units within the refinery. Additionally, an economic feasibility study was carried out to determine the viability of renewable energy technology project implementation to overcome energy requirement of the refinery. Electricity generation through all renewable energy sources considered (i.e. solar PV, solar CSP and wind) were found feasible based on their low levelized cost of electricity (LCOE). The payback period for a Solar CSP project, with an annual capacity of about 411 GWh and a lifetime of 30 years, was found to be 10 years. In contrast, the payback period for Solar PV and Wind were calculated to be 7 and 6 years, respectively. This opens up possibilities for integrating renewables into the refining sector as well as optimizing multiple energy carrier systems within the crude oil industry

Integrating Professional Development across the Curriculum: An Effectiveness Study

Science.gov (United States)

Ciarocco, Natalie J.; Dinella, Lisa M.; Hatchard, Christine J.; Valosin, Jayde

2016-01-01

The current study empirically tested the effectiveness of a modular approach to integrating professional development across an undergraduate psychology curriculum. Researchers conducted a two-group, between-subjects experiment on 269 undergraduate psychology students assessing perceptions of professional preparedness and learning. Analysis…

An Analysis of Countries which have Integrated Coding into their Curricula and the Content Analysis of Academic Studies on Coding Training in Turkey

Directory of Open Access Journals (Sweden)

Hüseyin Uzunboylu

2017-11-01

Full Text Available The first aim is to conduct a general analysis of countries which have integrated coding training into their curricula, and the second aim is to conduct a content analysis of studies on coding training in Turkey. It was identified that there are only a few academic studies on coding training in Turkey, and that the majority of them were published in 2016, the intended population was mainly “undergraduate students” and that the majority of these students were Computer Education and Instructional Technology undergraduates. It was determined that the studies mainly focused on the subjects of “programming” and “Scratch”, the terms programming and coding were used as synonyms, most of the studies were carried out using quantitative methods and data was obtained mostly by literature review and scale/survey interval techniques.

46 CFR 111.105-45 - Vessels carrying agricultural products.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Vessels carrying agricultural products. 111.105-45... ENGINEERING ELECTRIC SYSTEMS-GENERAL REQUIREMENTS Hazardous Locations § 111.105-45 Vessels carrying agricultural products. (a) The following areas are Class II, Division 1, (Zone 10 or Z) locations on vessels...

A Study of Spectral Integration and Normalization in NMR-based Metabonomic Analyses

Energy Technology Data Exchange (ETDEWEB)

Webb-Robertson, Bobbie-Jo M.; Lowry, David F.; Jarman, Kristin H.; Harbo, Sam J.; Meng, Quanxin; Fuciarelli, Alfred F.; Pounds, Joel G.; Lee, Monica T.

2005-09-15

Metabonomics involves the quantitation of the dynamic multivariate metabolic response of an organism to a pathological event or genetic modification (Nicholson, Lindon and Holmes, 1999). The analysis of these data involves the use of appropriate multivariate statistical methods. Exploratory Data Analysis (EDA) linear projection methods, primarily Principal Component Analysis (PCA), have been documented as a valuable pattern recognition technique for 1H NMR spectral data (Brindle et al., 2002, Potts et al., 2001, Robertson et al., 2000, Robosky et al., 2002). Prior to PCA the raw data is typically processed through four steps; (1) baseline correction, (2) endogenous peak removal, (3) integration over spectral regions to reduce the number of variables, and (4) normalization. The effect of the size of spectral integration regions and normalization has not been well studied. We assess the variability structure and classification accuracy on two distinctly different datasets via PCA and a leave-one-out cross-validation approach under two normalization approaches and an array of spectral integration regions. This study indicates that independent of the normalization method the classification accuracy achieved from metabonomic studies is not highly sensitive to the size of the spectral integration region. Additionally, both datasets scaled to mean zero and unity variance (auto-scaled) has higher variability within classification accuracy over spectral integration window widths than data scaled to the total intensity of the spectrum.

Langkawi Island, Social Aspect and the Carrying Capacity

Directory of Open Access Journals (Sweden)

Mohamad Diana

2014-01-01

Full Text Available The aptitude to convince a range of preferences has facilitated the island tourism attractions to achieve international recognition and at present KILIM Geopark is enjoyed by a prominent percentage of individuals wide-reaching. Conventional knowledge has that the island attractions are operating on the limited immobile resources, of which, have raised the scholars’ concerns over the carrying capacity issue. When analyzing carrying capacity, scholars have traditionally focused on the environmental part, hence, this working paper is motivated to convey onto the table issues relating to the social characteristics. This particular paper employed the self-administered questionnaire survey instrument which was structured to answer the two-fold objective specifically the tourists’ satisfaction level with their tourism experience and knowledge gap in relation to improving the island tourism. Targeting the tourists with minimum age of 18, this working paper collects information on the tourists’ perception towards hospitality, facilities and safety issues. In addition, this working paper comes to scrutinize different results of demographic factors as compared to what have been documented by earlier studies. Besides, it is learned that ‘safety issue’ variable plays an important role when it comes to the following factors: tourist arrival, access to facilities and tourism experience.

A pre-feasibility case study on integrated resource planning including renewables

International Nuclear Information System (INIS)

Yilmaz, Pelin; Hakan Hocaoglu, M.; Konukman, Alp Er S.

2008-01-01

In recent years, economical and environmental constraints force governments and energy policy decision-makers to change the prominent characteristics of the electricity markets. Accordingly, depending on local conditions on the demand side, usage of integrated resource planning approaches in conjunction with renewable technologies has gained more importance. In this respect, an integrated resource planning option, which includes the design and optimization of grid-connected renewable energy plants, should be evaluated to facilitate a cost-effective and green solution to a sustainable future. In this paper, an integrated resource planning case is studied for an educational campus, located in Gebze, Turkey. It is found that for the considered campus, the integrated resource planning scenario that includes renewables as a supply-side option with existing time-of-use tariff may provide a cost-effective energy production, particularly for the high penetration level of the renewables

MODELLING STUDIES ON THE USE OF ALUMINIUM ALLOYS IN LIGHTWEIGHT LOAD-CARRYING CRANE STRUCTURES

Directory of Open Access Journals (Sweden)

Damian GĄSKA

2016-09-01

Full Text Available The article presents the results of numerical analysis whose aim was to compare the basic dynamic and strength parameters of lightweight load-carrying crane structures made of aluminium alloys and steel. The analysis covered the typical construction of workshop cranes with a span of 3 to 5 meters, girders in the form of an I-beam and maximum load capacities amounting to 5 tons. The values of stresses, deflections and natural frequencies were compared and then matched with the masses of the various structures. In the simulation a girder model was used and computed by the finite element method.

Technical Integration of SMART Pilot Plant

Energy Technology Data Exchange (ETDEWEB)

Kim, S. H.; Park, P. H.; Noh, P. C. (and others)

2006-12-15

Preliminary experimental tests were carried out using the thermal-hydraulic integral test facility, VISTA (Experimental Verification by Integral Simulation of Transients and Accidents), which has been constructed to simulate the SMART-P. The VISTA facility is an integral test facility including the primary and secondary systems as well as safety-related Passive Residual heat removal (PRHR) systems. The integrated SMART desalination plant consists of Multi Effect Distillation Process combined with Thermal-Vapor Compressor(MED-TVC) and coupled with the extracted steam from turbine through the steam transformer. Steam transformer produces the main pressure steam and supplies to the MED-TVC unit. MED-TVC was selected as a desalination process coupled with SMART, since the thermal vapor compression is very effective where the steam is available at high temperature and pressure conditions than required in the evaporator. The standard design of the SMART desalination plant is under development as a part of the SMART project. This report describes design concept of these systems and their requirements.

Integral transform solutions of dynamic response of a clamped–clamped pipe conveying fluid

International Nuclear Information System (INIS)

Gu Jijun; An Chen; Duan Menglan; Levi, Carlos; Su Jian

2013-01-01

Highlights: ► Dynamic response of pipe conveying fluid was studied numerically. ► The generalized integral transform technique (GITT) was applied. ► Numerical solutions with automatic global accuracy control were obtained. ► Excellent convergence behavior was shown. ► Modal separation analysis was carried out and the influence of mass ratio was analyzed. - Abstract: Analysis of dynamic response of pipe conveying fluid is an important aspect in nuclear power plant design. In the present paper, dynamic response of a clamped–clamped pipe conveying fluid was solved by the generalized integral transform technique (GITT). The governing partial differential equation was transformed into a set of second-order ordinary differential equations which is then numerically solved by making use of the subroutine DIVPAG from IMSL Library. A thorough convergence analysis was performed to yield sets of reference results of the transverse deflection at different time and spanwise position. We found good agreement between the computed natural frequencies at mode 1–3 and those obtained by previous theoretical study. Besides, modal separation analysis was carried out and the influence of mass ratio on deflection and natural frequencies was qualitatively and quantitatively assessed.

Analysis and Study on Performance of a New Integrated Dust Precipitator

Directory of Open Access Journals (Sweden)

Lia Zhihua

2016-01-01

Full Text Available The dust precipitator is integrated with cyclone and bag filter, With the aid of a mathematical model this paper proposed. the flow characteristics of dust-gas inside the new dust precipitator is studied. It is concluded that the new integrated dust precipitator combines the advantages of the cyclone and bag filter, avoids the violent fluctuation to bags when working, and raises the filtrating efficiency.

A Numerical Study of Quantization-Based Integrators

Directory of Open Access Journals (Sweden)

Barros Fernando

2014-01-01

Full Text Available Adaptive step size solvers are nowadays considered fundamental to achieve efficient ODE integration. While, traditionally, ODE solvers have been designed based on discrete time machines, new approaches based on discrete event systems have been proposed. Quantization provides an efficient integration technique based on signal threshold crossing, leading to independent and modular solvers communicating through discrete events. These solvers can benefit from the large body of knowledge on discrete event simulation techniques, like parallelization, to obtain efficient numerical integration. In this paper we introduce new solvers based on quantization and adaptive sampling techniques. Preliminary numerical results comparing these solvers are presented.

Study on simplified estimation of J-integral under thermal loading

International Nuclear Information System (INIS)

Takahashi, Y.

1993-01-01

. On the other hand, a method utilizing the stress intensity factor (SIF) solutions for crack surface loading, called influence function method, has been developed for linear elastic problem. This method is very versatile in the sense that it can be applied for estimating the SIF for arbitrary loading using , the stress distribution for an identical but uncracked body, which is much easier to analyze. Therefore utilization of this method in the nonlinear thermal stress problem should be promising if succeeded. Sakon and Kaneko showed that purely elastic solutions give reasonably good estimates of J-integral even for elastic-plastic cracked bodies subjected to deformation controlled loading. On the other hand, Budden studied procedures for estimating J-integral based on stress/strain distribution obtained by elastic-plastic analysis for uncracked bodies. To assess the validity of these approaches as well as their variations in a broader range of conditions, detailed finite element analysis for cracked and uncracked cylinders was conducted in this study

Airframe Integration Trade Studies for a Reusable Launch Vehicle

Science.gov (United States)

Dorsey, John T.; Wu, Chauncey; Rivers, Kevin; Martin, Carl; Smith, Russell

1999-01-01

Future launch vehicles must be lightweight, fully reusable and easily maintained if low-cost access to space is to be achieved. The goal of achieving an economically viable Single-Stage-to-Orbit (SSTO) Reusable Launch Vehicle (RLV) is not easily achieved and success will depend to a large extent on having an integrated and optimized total system. A series of trade studies were performed to meet three objectives. First, to provide structural weights and parametric weight equations as inputs to configuration-level trade studies. Second, to identify, assess and quantify major weight drivers for the RLV airframe. Third, using information on major weight drivers, and considering the RLV as an integrated thermal structure (composed of thrust structures, tanks, thermal protection system, insulation and control surfaces), identify and assess new and innovative approaches or concepts that have the potential for either reducing airframe weight, improving operability, and/or reducing cost.

Horizontal integration in the development strategy of mining companies

Directory of Open Access Journals (Sweden)

Jan Kudełko

2016-01-01

Full Text Available Integration strategy is one option in the development of mining companies and is implemented through a connection of either processes or economic entities which operate or may operate separately. Usually this strategy is carried out by companies that occupy a very strong competitive position. Considering its direction, it may be horizontal or vertical. Horizontal integration strategy stems from a desire to increase market share by an entrepreneur or create a new company based on common know-how and combined operational processes. It can be realized in an external dimension through a merger or takeover, as well as in the internal dimension based on its own resources. The external dimension is based on capital or contractual integration of a company with external economic entities performing related or conglomerate activity. The targets of such integration have a resource, a market effectiveness, or a competence nature. In the case of mining companies, it covers all important activity areas, including geology, mining, processing, environmental protection, and waste management, and is carried out with due diligence. In the internal dimension, the strategy of horizontal integration consists in consolidating the strategic targets of all business units around the company’s (corporation’s targets. The authors focused on two trends most relevant to pursuing a horizontal integration strategy, including increasing the company’s flexibility and undertaking joint activities. Flexibility consists in the potential ability of the company to adapt quickly to changed environment conditions. Joint activity includes co-operation of its respective units in terms of products, markets, and functions.

Integrated network for structural integrity monitoring of critical components in nuclear facilities, RIMIS

International Nuclear Information System (INIS)

Roth, Maria; Constantinescu, Dan Mihai; Brad, Sebastian; Ducu, Catalin; Malinovschi, Viorel

2008-01-01

The round table aims to join specialists working in the research area of the Romanian R and D Institutes and Universities involved in structural integrity assessment of materials, especially those working in the nuclear field, together with the representatives of the end user, the Cernavoda NPP. This scientific event will offer the opportunity to disseminate the theoretical, experimental and modelling activities, carried out to date, in the framework of the National Program 'Research of Excellence', Module I 2006-2008, managed by the National Authority for Scientific Research. Entitled 'Integrated Network for Structural Integrity Monitoring of Critical Components in Nuclear Facilities, RIMIS, the project has two main objectives: 1. - to elaborate a procedure applicable to the structural integrity assessment of critical components used in Romanian nuclear facilities (CANDU type Reactor, Hydrogen Isotopes Separation installations); 2. - to integrate the national networking into a similar one of European level, and to enhance the scientific significance of Romanian R and D organisations as well as to increase the contribution in solving major issues of the nuclear field. The topics of the round table will be focused on: 1. Development of a Structural Integrity Assessment Methodology applicable to the nuclear facilities components; 2. Experimental investigation methods and procedures; 3. Numeric simulation of nuclear components behaviour; 4. Further activities to finalize the assessment procedure. Also participations and contributions to sustain the activity in the European Network NULIFE, FP6 will be discussed. (authors)

Ecological and Socio-Economic Modeling of Consequences of Biological Management Scenarios Implementation in Integrated Watershed Management (Case Study: Simindasht Catchment

Directory of Open Access Journals (Sweden)

A. R. Keshtkar

2016-09-01

Full Text Available Integrated watershed management is considered as a new principle for development planning and management of water and soil resources emphasizing on socio-economic characteristics of the region to sustainable livelihoods without vulnerability for plants and the residents of an area. This research, in line with the objectives of integrated management, has been carried out for modelling and evaluating the effects of ecological, socio-economic consequences resulting from the implementation of the proposed management plans on the vegetation changes with a focus on the problems in Simindasht catchment, located in Semnan and Tehran Provinces. After standardization of indices by distance method and weighing them, the scenarios were prioritized using multi-criteria decision-making technique. Trade-off analysis of the results indicates that in the integrated management of Simindasht catchment more than one single management solution, covering all aspects of the system can be recommended in different weighting approaches. The approach used herein, considering the results of different models and comparing the results, is an efficient tool to represent the watershed system as a whole and to facilitate decision making for integrated watershed management.

Pixel extraction based integral imaging with controllable viewing direction

International Nuclear Information System (INIS)

Ji, Chao-Chao; Deng, Huan; Wang, Qiong-Hua

2012-01-01

We propose pixel extraction based integral imaging with a controllable viewing direction. The proposed integral imaging can provide viewers three-dimensional (3D) images in a very small viewing angle. The viewing angle and the viewing direction of the reconstructed 3D images are controlled by the pixels extracted from an elemental image array. Theoretical analysis and a 3D display experiment of the viewing direction controllable integral imaging are carried out. The experimental results verify the correctness of the theory. A 3D display based on the integral imaging can protect the viewer’s privacy and has huge potential for a television to show multiple 3D programs at the same time. (paper)

Generation of induced pluripotent stem cells (iPSC) from an atrial fibrillation patient carrying a KCNA5 p.D322H mutation

DEFF Research Database (Denmark)

Mora, Cristina; Serzanti, Marialaura; Giacomelli, Alessio

2017-01-01

. To investigate the molecular mechanisms underlying AF, we reprogrammed to pluripotency polymorphonucleated leukocytes isolated from the blood of a patient carrying a KCNA5 p.D322H mutation, using a commercially available non-integrating system. The generated iPSCs expressed pluripotency markers...... and differentiated toward cells belonging to the three embryonic germ layers. Moreover, the cells showed a normal karyotype and retained the p.D322H mutation....

Generation of induced pluripotent stem cells (iPSC) from an atrial fibrillation patient carrying a PITX2 p.M200V mutation

DEFF Research Database (Denmark)

Mora, Cristina; Serzanti, Marialaura; Giacomelli, Alessio

2017-01-01

the molecular mechanisms underlying AF, we reprogrammed to pluripotency polymorphonucleated leukocytes isolated from the blood of a patient carrying a PITX2 p.M200V mutation, using a commercially available non-integrating expression system. The generated iPSCs expressed pluripotency markers and differentiated...... toward cells belonging to the three embryonic germ layers. Moreover, the cells showed a normal karyotype and retained the PITX2 p.M200V mutation....

Vertical integration and profitability of the agrifood industry in an economic crisis context

Directory of Open Access Journals (Sweden)

Alfredo J. Grau

2015-12-01

Full Text Available In a setting of economic and financial crisis, most companies experienced a reduction in their profitability. Thus, our study allows us to identify vertical integration strategies developed by companies to overcome the crisis. This paper is aimed at unveiling the determining factors of the profitability of Spanish agrifood firms, depending on whether they are backwards vertically integrated or not. In order to attain our objective, we implemented a first difference regression model. The main contributions of the article lie in the incorporation of a variable that distinguishes integrated firms from the rest and the separate analysis of the two groups of firms. The results suggest that firms that seek to differentiate themselves, either through offering a specific product or through providing higher quality with a view to maintaining their reputation, are more likely to adopt vertical integration due to the higher transaction costs of relations with suppliers. The grouping carried out in this study is shown to be highly relevant as asset structure implies different strategies for actions aimed at increasing profitability.

Vertical integration and profitability of the agrifood industry in an economic crisis context

Energy Technology Data Exchange (ETDEWEB)

Grau, A.J.; Reig, A.

2015-07-01

In a setting of economic and financial crisis, most companies experienced a reduction in their profitability. Thus, our study allows us to identify vertical integration strategies developed by companies to overcome the crisis. This paper is aimed at unveiling the determining factors of the profitability of Spanish agrifood firms, depending on whether they are backwards vertically integrated or not. In order to attain our objective, we implemented a first difference regression model. The main contributions of the article lie in the incorporation of a variable that distinguishes integrated firms from the rest and the separate analysis of the two groups of firms. The results suggest that firms that seek to differentiate themselves, either through offering a specific product or through providing higher quality with a view to maintaining their reputation, are more likely to adopt vertical integration due to the higher transaction costs of relations with suppliers. The grouping carried out in this study is shown to be highly relevant as asset structure implies different strategies for actions aimed at increasing profitability. (Author)

A study on the effects of marketing communication using integrated marketing communication

Directory of Open Access Journals (Sweden)

Solmaz Sellahvarzi

2014-07-01

Full Text Available Integrated Marketing Communication (IMC is one of the needed concepts in competitive edge. IMC is defined as a cross functional process for creating and nourishing profitable relationships with customers and other stakeholders by strategically controlling or impacting all messages sent to these groups. It ensures that all forms of communications and messages are carefully linked together. This study investigates the effectiveness of marketing communication in an Iranian automaker named Khodro using IMC system. The study tries to audit the rate of marketing relationship integrity and its outcome on organization performance. The study designs a questionnaire and distributes it among 384 randomly selected people who use this firm’s services and Cronbach alpha has been calculated as 0.974. Hypotheses of this survey are exanimated by Pearson correlation test as well as pairwise t-student tests. The results show the effects of integrated marketing Communication on organization performance. In addition, there is a significant positive correlation relationship between integrated marketing communication with mission marketing, Cross functional Strategic Planning and Interactivity. Finally, there is a significant positive correlation relationship between dimensions of IMC.

Micronization increases vitamin E carrying and releasing abilities of insoluble fiber.

Science.gov (United States)

Hsu, Pang-Kuei; Chien, Po-Jung; Chau, Chi-Fai

2008-03-26

This study was to investigate the effects of micronization on vitamin-carrying capacity and slow-release ability of carambola (starfruit) insoluble fiber (IF) and cellulose using in vitro and in vivomodels. Upon micronization, carambola IF (8.1 microm) underwent structural changes to expose more functional groups in the fiber matrix and to exhibit higher oil-holding capacity ( approximately 20.4-fold). Micronized fibers in forms of fiber-vitamin composites, particularly the micronized carambola IF-vitamin composite, were capable of carrying vitamin E (alpha-tocopherol) up to 9.6-fold over their unmicronized forms and releasing nutrient gradually. Animal studies demonstrated that the adminstration of micronized carambola IF-vitamin composite could maintain the plasma vitamin E of rats at relatively higher levels (2.1-3.6-fold of the initial values) for at least 5 h. The results suggested that micronized fibers, particularly the micronized carambola IF, could be exploited as potential nutrient carriers in food applications and also be used to produce slow-release formulations.

Integrative Analysis of Cancer Diagnosis Studies with Composite Penalization

Science.gov (United States)

Liu, Jin; Huang, Jian; Ma, Shuangge

2013-01-01

Summary In cancer diagnosis studies, high-throughput gene profiling has been extensively conducted, searching for genes whose expressions may serve as markers. Data generated from such studies have the “large d, small n” feature, with the number of genes profiled much larger than the sample size. Penalization has been extensively adopted for simultaneous estimation and marker selection. Because of small sample sizes, markers identified from the analysis of single datasets can be unsatisfactory. A cost-effective remedy is to conduct integrative analysis of multiple heterogeneous datasets. In this article, we investigate composite penalization methods for estimation and marker selection in integrative analysis. The proposed methods use the minimax concave penalty (MCP) as the outer penalty. Under the homogeneity model, the ridge penalty is adopted as the inner penalty. Under the heterogeneity model, the Lasso penalty and MCP are adopted as the inner penalty. Effective computational algorithms based on coordinate descent are developed. Numerical studies, including simulation and analysis of practical cancer datasets, show satisfactory performance of the proposed methods. PMID:24578589

Occurrence of Enterobacter hormaechei carrying blaNDM-1 and blaKPC-2 in China.

Science.gov (United States)

Yang, Biwei; Feng, Yu; McNally, Alan; Zong, Zhiyong

2018-02-01

Three carbapenem-resistant clinical isolates of the Enterobacter cloacae complex (ECC) were recovered from different patients in a hospital. All 3 isolates carried 2 carbapenemase genes bla KPC-2 and bla NDM-1 . A study was performed to characterize their relatedness and to investigate possible links among the patients. Whole genome sequencing revealed that the isolates were Enterobacter hormaechei and belonged to ST177 of the ECC. There were 19-142 single nucleotide polymorphisms (SNPs) between the isolates, suggesting that the isolates were likely from a central reservoir, which might have existed for some time. bla KPC-2 and bla NDM-1 were carried on 2 different IncF-type plasmids in the isolates. The 3 bla NDM-1 -carrying plasmids were almost identical and were self-transmissible, while the bla KPC-2 -carrying plasmids were only transmissible in the presence of the bla NDM-1 -carrying plasmid. The source of and direct links among them were not identified, suggesting a hospital transmission of a common multidrug resistant strain. Copyright © 2017 Elsevier Inc. All rights reserved.

Integration of constrained electrical and seismic tomographies to study the landslide affecting the cathedral of Agrigento

International Nuclear Information System (INIS)

Capizzi, P; Martorana, R

2014-01-01

The Cathedral of Saint Gerland, located on the top of the hill of Agrigento, is an important historical church, which dates back to the Arab–Norman period (XI century). Unfortunately throughout its history the Cathedral and the adjacent famous Archaeological Park of the ‘Valley of the Temples’ have been affected by landslides. In this area the interleaving of calcarenites, silt, sand and clay is complicated by the presence of dislocated rock blocks and cavities and by a system of fractures partly filled with clay or water. Integrated geophysical surveys were carried out on the north side of the hill, on which the Cathedral of Agrigento is founded, to define lithological structures involved in the failure process. Because of the landslide, the cathedral has been affected by fractures, which resulted in the overall instability of the structure. Along each of four footpaths a combination of 2D electrical resistivity tomographies (ERT) and 2D seismic refraction tomographies (SRT) was performed. Moreover, along two of these footpaths microtremor (HVSR) and surface wave soundings (MASW) were carried out to reconstruct 2D sections of shear waves velocity. Furthermore a 3D electrical resistivity tomography was carried out in a limited area characterized by gentle slopes. After a preliminary phase, in which the data were processed independently, a subsequent inversion of seismic and electrical data was constrained with stratigraphic information obtained from geognostic continuous core boreholes located along the geophysical lines. This process allowed us to significantly increase the robustness of the geophysical models. The acquired data were interpolated to construct 3D geophysical models of the electrical resistivity and of the P-wave velocity. The interpolation algorithm took into account the average direction and immersion of geological strata. Results led to a better understanding of the complexity of the subsoil in the investigated area. The use of integrated

A METHOD OF SECURITY SCANNING OF CARRY-ON ITEMS, AND A CARRY-ON ITEMS SECURITY SCANNING SYSTEM

DEFF Research Database (Denmark)

2017-01-01

A security scanning system (1) comprises a first stage module (3) having at least one X-ray source (6) and at least three first detectors (7) that are line-shaped and arranged in mutually different orientations and have at least dual energy resolution. A group of carry-on items (4) on a carrier...

Mental disorders and work integration: a retrospective study in a northern italian town.

Science.gov (United States)

Buizza, Chiara; Pioli, Rosaria; Lecchi, Sara; Bonetto, Chiara; Bartoli, Anna; Taglietti, Renzo; Ghilardi, Alberto; Riva, Eugenio

2013-01-01

THE PRESENT STUDY WAS CONDUCTED IN A VOCATIONAL INTEGRATION SERVICE OF A NORTHERN ITALIAN TOWN WITH TWO MAJOR AIMS: to assess vocational integration programs undertaken from 1(st) January 2004 to 1(st) January 2007; and to identify job tenure-associated predictors. This is a retrospective study; we collected data such as gender, age, duration, type and outcome of the vocational integration program, and number of interventions performed by the vocational integration service. Self-report questionnaires were also used to assess the satisfaction of users, caregivers, practitioners, and of the company contacts involved in the study. The service has enrolled 84 users during the observation period. Out of these users, 64.3% of them still had their jobs after three years. Users, caregivers and company contacts expressed high levels of satisfaction for the support received by the vocational integration service. The company expressed less satisfaction for the collaboration received by the Departments of Mental Health (DMHs) that coached the users. The only variable associated to the outcome was the number of interventions that the users received before their placement on the job. Despite all the limits of this study, its results show that the chance of taking advantage of a supported job placement service has likely proven itself effective in helping people with mental disorders to obtain and maintain a competitive employment. Our results, however, also point to the necessity of implementing newer strategies meant to develop a greater integration among all services dealing with mentally ill people.

An integrated production, inventory and preventive maintenance model for a multi-product production system

International Nuclear Information System (INIS)

Liu, Xuejuan; Wang, Wenbin; Peng, Rui

2015-01-01

This paper considers a production system that can produce multiple products alternately. Products go through the system in a sequence and a complete run of all products forms a production cycle. An integrated production, inventory and preventive maintenance model is constructed, which is characterized by the delay-time concept. Two different situations are studied based on whether the unqualified products and downtime caused by the failures of the system, set-up and preventive maintenance can be ignored or not. Three cases are considered for each situation, depending on the position of the preventive maintenance epochs: the first case, where preventive maintenance is carried out at the end of each production cycle; the second case, where preventive maintenance is carried out at each set-up time of the products; and the third case, where preventive maintenance is carried out at some set-up times only, since it may not always be optimal to carry out preventive maintenance at the end of the production cycle or at each set-up time. The modeling objectives are to find the optimal number of production cycles per year and the optimal position of preventive maintenance that will maximize the expected profit per unit time. Numerical examples, using real data, are presented to illustrate the model. - Highlights: • We propose an integrated economic production quantity and preventive maintenance model. • The situation that multiple products are produced on the same system alternately is studied. • Two situations are studied based on whether the downtime and the product quality can be ignored or not. • We use enumeration method and analytical method to select the optimal preventive maintenance policy, respectively. • We use the delay-time concept to model the preventive maintenance policy

INTEGRATED EXPLORATION OF GEOTHERMAL RESOURCES

OpenAIRE

A. B. Alkhasov; D. A. Аlkhasova; R. M. Aliyev; A. Sh. Ramazanov

2016-01-01

The aim. The aim is to develop the energy efficient technologies to explore hydro geothermal resources of different energy potential.Methods. Evaluation of the effectiveness of the proposed technologies has been carried out with the use of physical and mathematical, thermodynamic and optimization methods of calculation and the physical and chemical experimental research.Results. We propose the technology of integrated exploration of low-grade geothermal resources with the application of heat ...

HHV-6A/B Integration and the Pathogenesis Associated with the Reactivation of Chromosomally Integrated HHV-6A/B.

Science.gov (United States)

Collin, Vanessa; Flamand, Louis

2017-06-26

Unlike other human herpesviruses, human herpesvirus 6A and 6B (HHV-6A/B) infection can lead to integration of the viral genome in human chromosomes. When integration occurs in germinal cells, the integrated HHV-6A/B genome can be transmitted to 50% of descendants. Such individuals, carrying one copy of the HHV-6A/B genome in every cell, are referred to as having inherited chromosomally-integrated HHV-6A/B (iciHHV-6) and represent approximately 1% of the world's population. Interestingly, HHV-6A/B integrate their genomes in a specific region of the chromosomes known as telomeres. Telomeres are located at chromosomes' ends and play essential roles in chromosomal stability and the long-term proliferative potential of cells. Considering that the integrated HHV-6A/B genome is mostly intact without any gross rearrangements or deletions, integration is likely used for viral maintenance into host cells. Knowing the roles played by telomeres in cellular homeostasis, viral integration in such structure is not likely to be without consequences. At present, the mechanisms and factors involved in HHV-6A/B integration remain poorly defined. In this review, we detail the potential biological and medical impacts of HHV-6A/B integration as well as the possible chromosomal integration and viral excision processes.

Study plan for evaluating carrying capacity: Measure 7.1A of the Northwest Power Planning Council's 1994 Fish and Wildlife Program. Report 2 of 4, Final report

International Nuclear Information System (INIS)

Neitzel, D.A.; Johnson, G.E.

1996-05-01

This report is one report of four that the Pacific Northwest National Laboratory (PNNL) staff used to address Measure 7.1A in the Northwest Power Planning Council's (Council) fish and Wildlife Program (Program) dated December 1994 (NPPC 1994). Measure 7.1A calls for the Bonneville Power Administration (BPA) to fund an evaluation of salmon survival, ecology, carrying capacity, and limiting factors in freshwater, estuarine, and marine habitats. Additionally, the Measure asks for the development of a study plan based on the critical uncertainties and research needs identified during the evaluation. In the evaluation of carrying capacity the authors concluded that defining capacity and listing the determinants of capacity is not a simple exercise. Capacity is a complex variable among the attributes that all together define salmon performance. To pursue the capacity parameter, that is, a single number or set of numbers that quantify how many salmon the basin or any part of the basin can support, will not lead to the development of a useful study plan. To increase understanding of ecology, carrying capacity, and limiting factors, it is necessary to deal with the complexity of the sustained performance of salmon in the Columbia River Basin. This report describes the elements of a study plan that could be used to increase the understanding of ecology, carrying capacity, and limiting factors that influence salmon survival under current conditions

Corporate Culture Assessments in Integrative Oncology: A Qualitative Case Study of Two Integrative Oncology Centers

Directory of Open Access Journals (Sweden)

Nadine Mittring

2013-01-01

Full Text Available The offer of “integrative oncology” is one option for clinics to provide safe and evidence-based complementary medicine treatments to cancer patients. As known from merger theories, corporate culture and integration models have a strong influence on the success of such integration. To identify relevant corporate culture aspects that might influence the success in two highly visible integrative oncology clinics, we interviewed physicians, nurses, practitioners, and managers. All interviews (11 in a German breast cancer clinic and 9 in an integrative medicine cancer service in the USA were audio-recorded, transcribed and analyzed with content analysis. According to the theoretical framework of mergers, each clinic selected a different integration type (“best of both worlds” and “linking”. Nonetheless, each developed a similar corporate culture that has a strong focus on research and safe and evidence-based treatments, and fosters a holistic and patient-centered approach. Structured communication within the team and with other departments had high relevance. Research was highlighted as a way to open doors and to facilitate a more general acceptance within the hospital. Conventional physicians felt unburdened by the provision of integrative medicine service but also saw problems in the time required for scheduled treatments, which often resulted in long waiting lists.

Corporate culture assessments in integrative oncology: a qualitative case study of two integrative oncology centers.

Science.gov (United States)

Mittring, Nadine; Pérard, Marion; Witt, Claudia M

2013-01-01

The offer of "integrative oncology" is one option for clinics to provide safe and evidence-based complementary medicine treatments to cancer patients. As known from merger theories, corporate culture and integration models have a strong influence on the success of such integration. To identify relevant corporate culture aspects that might influence the success in two highly visible integrative oncology clinics, we interviewed physicians, nurses, practitioners, and managers. All interviews (11 in a German breast cancer clinic and 9 in an integrative medicine cancer service in the USA) were audio-recorded, transcribed and analyzed with content analysis. According to the theoretical framework of mergers, each clinic selected a different integration type ("best of both worlds" and "linking"). Nonetheless, each developed a similar corporate culture that has a strong focus on research and safe and evidence-based treatments, and fosters a holistic and patient-centered approach. Structured communication within the team and with other departments had high relevance. Research was highlighted as a way to open doors and to facilitate a more general acceptance within the hospital. Conventional physicians felt unburdened by the provision of integrative medicine service but also saw problems in the time required for scheduled treatments, which often resulted in long waiting lists.

Grip force and heart rate responses to manual carrying tasks: effects of material, weight, and base area of the container.

Science.gov (United States)

Lee, Tzu-Hsien; Tseng, Chia-Yun

2014-01-01

This study recruited 16 industrial workers to examine the effects of material, weight, and base area of container on reduction of grip force (ΔGF) and heart rate for a 100-m manual carrying task. This study examined 2 carrying materials (iron and water), 4 carrying weights (4.4, 8.9, 13.3, 17.8 kg), and 2 base areas of container (24 × 24 cm, 35 × 24 cm). This study showed that carrying water significantly increased ΔGF and heart rate as compared with carrying iron. Also, ΔGF and heart rate significantly increased with carrying weight and base area of container. The effects of base area of container on ΔGF and heart rate were greater in carrying water condition than in carrying iron condition. The maximum dynamic effect of water on ΔGF and heart rate occurred when water occupied ~60%-80% of full volume of the container.

Learning word meanings: Overnight integration and study modality effects

NARCIS (Netherlands)

Ven, F. van der; Takashima, A.; Segers, P.C.J.; Verhoeven, L.T.W.

2015-01-01

According to the complementary learning systems (CLS) account of word learning, novel words are rapidly acquired (learning system 1), but slowly integrated into the mental lexicon (learning system 2). This two-step learning process has been shown to apply to novel word forms. In this study, we

Gesture and Speech Integration: An Exploratory Study of a Man with Aphasia

Science.gov (United States)

Cocks, Naomi; Sautin, Laetitia; Kita, Sotaro; Morgan, Gary; Zlotowitz, Sally

2009-01-01

Background: In order to comprehend fully a speaker's intention in everyday communication, information is integrated from multiple sources, including gesture and speech. There are no published studies that have explored the impact of aphasia on iconic co-speech gesture and speech integration. Aims: To explore the impact of aphasia on co-speech…

Water Environmental Carrying Capacity for Activities of Intensive Shrimp Farm in Banyuputih Sub-District, Situbondo Regency

Directory of Open Access Journals (Sweden)

Abdul Muqsith

2014-09-01

Full Text Available This research was aimed to determine the width area of an intensive shrimp farm which can be supported by water environment of Banyuputih Sub-District, Situbondo Regency according to the water assimilation capacity towards the farm’s organic waste. We used survey method and secondary data collection from other researches or result report of relevant institution. This study was using two approaches of environmental carrying capacities, i.e. (1 quantitative method on available water volume in coast (coastal water and (2 quantitative method on available Dissolved Oxygen (DO in waste receiving water body of coastal water. The result showed that the utilization of coastal area for intensive shrimp farm activities in this study area is not exceeding its carrying capacity of water yet. Based on the analysis, the water environmental carrying capacity for the farm’s organic waste is 375.637 kg TSS. Organic waste (TSS disposed from an intensive shrimp cultivation at the study area is 6.506 kg TSS.ha-1.MT-1. The width of intensive area which can be supported by Banyuputih Situbondo water environment is 58 ha. The width of available intensive pond area at study site is 113 ha, but only 39 ha is active/productive, the remaining 74 ha is inactive/unproductive area. If unproductive area will be re-operated/reactivated again, then we would recommend only 19 ha according to the water environment carrying capacity for the farm’s organic waste (58 ha. Estimation result of water environment carrying capacity for this organic waste of shrimp farm can be used as reference to determine the development or management threshold of sustainable pond area at this study site.   Keywords: environment carrying capacity, organic waste, shrimp farm

Durability as integral characteristic of concrete

Science.gov (United States)

Suleymanova, L. A.; Pogorelova, I. A.; Suleymanov, K. A.; Kirilenko, S. V.; Marushko, M. V.

2018-03-01

The carried-out research provides insight into the internal bonds energy in material as the basis of its durability, deformability, integrity and resistance to different factors (combined effects of external loadings and (or) environment), into the limits of technical possibilities, durability and physical reality of the process of concrete deterioration, which allows designing reliable and cost-effective ferroconcrete constructions for different purposes.

Crossover integral equation theory for the liquid structure study

International Nuclear Information System (INIS)

Lai, S.K.; Chen, H.C.

1994-08-01

The main purpose of this work is to report on a calculation that describes the role of the long-range bridge function [H. Iyetomi and S. Ichimaru, Phys. Rev. A 25, 2434 (1982)] as applied to the study of structure of simple liquid metals. It was found here that this bridge function accounts pretty well for the major part of long-range interactions but is physically inadequate for describing the short-range part of liquid structure. To improve on the theory we have drawn attention to the crossover integral equation method which, in essence, amounts to adding to the above bridge function a short-range correction of bridge diagrams. The suggested crossover procedure has been tested for the case of liquid metal Cs. Remarkably good agreement with experiment was obtained confirming our conjecture that the crossover integral equation approach as stressed in this work is potentially an appropriate theory for an accurate study of liquid structure possibly for the supercooled liquid regime. (author). 21 refs, 3 figs

Safety design integrated in the building delivery system

DEFF Research Database (Denmark)

Jørgensen, Kirsten

2013-01-01

. The purpose of this article is to demonstrate how safety and health can be integrated in the design phases integrated in the management delivery systems within construction, The method for the research was to go through the building delivery system step by step and create a normative description of what, when......In construction, it is important to view safety and health as an integrated part of the way that “designers” are working. The designers cowers architects, constructors, engineers and others who carry out their consulting services in the design phase of a construction project. The philosophy...... and how to fully integrate safety in each part of the process. The result is a concept and guideline including control forms for how to integrate safety design in the Building Delivery System plus what to do and when. The concept has been tested in an educational context. The practical value...

Cycles of self-pulsations in a photonic integrated circuit.

Science.gov (United States)

Karsaklian Dal Bosco, Andreas; Kanno, Kazutaka; Uchida, Atsushi; Sciamanna, Marc; Harayama, Takahisa; Yoshimura, Kazuyuki

2015-12-01

We report experimentally on the bifurcation cascade leading to the appearance of self-pulsation in a photonic integrated circuit in which a laser diode is subjected to delayed optical feedback. We study the evolution of the self-pulsing frequency with the increase of both the feedback strength and the injection current. Experimental observations show good qualitative accordance with numerical results carried out with the Lang-Kobayashi rate equation model. We explain the mechanism underlying the self-pulsations by a phenomenon of beating between successive pairs of external cavity modes and antimodes.

Integrating Sustainability in a PBL Environment for Electronics Engineering

DEFF Research Database (Denmark)

Arsat, Mahyuddin; Holgaard, Jette Egelund; de Graaff, Erik

2013-01-01

(PBL) has been put forward as a promising pedagogical model and emerged as an opportunity to implement sustainability successfully. Due to the almost forty years of experience in PBL, a case study was carried out at Aalborg University, Denmark to excerpt their experience of integrating sustainability...... in a problem based learning environment. Three electronics engineering project modules were selected as example and empirically supported by constructed interviews with staff and document analysis of selected material. The findings were analysed with a systems approach and presented with reference to three...

Integrated geophysical study off Goa, Central West Coast of India

Digital Repository Service at National Institute of Oceanography (India)

Ramana, M.V.; Desa, M.; Ramprasad, T.

to 31r). The present study indicates that the Goa offshore is an integral part of the Laxmi Basin. As such it is interpreted that a tectonic boundary between the oceanic crust in the north and the CLR complex in the south lies south of the study area...

49 CFR Appendix E to Part 192 - Guidance on Determining High Consequence Areas and on Carrying out Requirements in the Integrity...

Science.gov (United States)

2010-10-01

... addressing time dependent and independent threats for a transmission pipeline operating below 30% SMYS not in... pipeline system are covered for purposes of the integrity management program requirements, an operator must... system, or an operator may apply one method to individual portions of the pipeline system. (Refer to...

Killing cancer cells by targeted drug-carrying phage nanomedicines

Directory of Open Access Journals (Sweden)

Yacoby Iftach

2008-04-01

Full Text Available Abstract Background Systemic administration of chemotherapeutic agents, in addition to its anti-tumor benefits, results in indiscriminate drug distribution and severe toxicity. This shortcoming may be overcome by targeted drug-carrying platforms that ferry the drug to the tumor site while limiting exposure to non-target tissues and organs. Results We present a new form of targeted anti-cancer therapy in the form of targeted drug-carrying phage nanoparticles. Our approach is based on genetically-modified and chemically manipulated filamentous bacteriophages. The genetic manipulation endows the phages with the ability to display a host-specificity-conferring ligand. The phages are loaded with a large payload of a cytotoxic drug by chemical conjugation. In the presented examples we used anti ErbB2 and anti ERGR antibodies as targeting moieties, the drug hygromycin conjugated to the phages by a covalent amide bond, or the drug doxorubicin conjugated to genetically-engineered cathepsin-B sites on the phage coat. We show that targeting of phage nanomedicines via specific antibodies to receptors on cancer cell membranes results in endocytosis, intracellular degradation, and drug release, resulting in growth inhibition of the target cells in vitro with a potentiation factor of >1000 over the corresponding free drugs. Conclusion The results of the proof-of concept study presented here reveal important features regarding the potential of filamentous phages to serve as drug-delivery platform, on the affect of drug solubility or hydrophobicity on the target specificity of the platform and on the effect of drug release mechanism on the potency of the platform. These results define targeted drug-carrying filamentous phage nanoparticles as a unique type of antibody-drug conjugates.

Killing cancer cells by targeted drug-carrying phage nanomedicines

Science.gov (United States)

Bar, Hagit; Yacoby, Iftach; Benhar, Itai

2008-01-01

Background Systemic administration of chemotherapeutic agents, in addition to its anti-tumor benefits, results in indiscriminate drug distribution and severe toxicity. This shortcoming may be overcome by targeted drug-carrying platforms that ferry the drug to the tumor site while limiting exposure to non-target tissues and organs. Results We present a new form of targeted anti-cancer therapy in the form of targeted drug-carrying phage nanoparticles. Our approach is based on genetically-modified and chemically manipulated filamentous bacteriophages. The genetic manipulation endows the phages with the ability to display a host-specificity-conferring ligand. The phages are loaded with a large payload of a cytotoxic drug by chemical conjugation. In the presented examples we used anti ErbB2 and anti ERGR antibodies as targeting moieties, the drug hygromycin conjugated to the phages by a covalent amide bond, or the drug doxorubicin conjugated to genetically-engineered cathepsin-B sites on the phage coat. We show that targeting of phage nanomedicines via specific antibodies to receptors on cancer cell membranes results in endocytosis, intracellular degradation, and drug release, resulting in growth inhibition of the target cells in vitro with a potentiation factor of >1000 over the corresponding free drugs. Conclusion The results of the proof-of concept study presented here reveal important features regarding the potential of filamentous phages to serve as drug-delivery platform, on the affect of drug solubility or hydrophobicity on the target specificity of the platform and on the effect of drug release mechanism on the potency of the platform. These results define targeted drug-carrying filamentous phage nanoparticles as a unique type of antibody-drug conjugates. PMID:18387177

Works carried out in the south of Cerro Largo district. Uranium prospection programme. Preliminary report

International Nuclear Information System (INIS)

Goso, H.

1978-01-01

During the carried out work of radimetric preliminary Investigation in the northeast of the uraniferous country were detected radimetric anonalias which are associated to the formation San Gregorio and Tres Islas. Later the works of prospection ratified those anomalies to which they defined in the environs other anomalies. The studies of revision of these conducted anomalies they took to conclude the necessity to carry out a detailed study of the area to that district was denominated Cerro Largo Sur

Integrating research evidence and physical activity policy making

DEFF Research Database (Denmark)

Aro, Arja R.; Bertram, Maja; Hämäläinen, Riitta-Maija

2016-01-01

Evidence shows that regular physical activity is enhanced by supporting environment. Studies are needed to integrate research evidence into health enhancing, cross-sector physical activity (HEPA) policy making. This article presents the rationale, study design, measurement procedures...... and the initial results of the first phase of six European countries in a five-year research project (2011-2016), REsearch into POlicy to enhance Physical Activity (REPOPA). REPOPA is programmatic research; it consists of linked studies; the first phase studied the use of evidence in 21 policies in implementation...... to learn more in depth from the policy making process and carried out 86 qualitative stakeholder interviews. The second, ongoing phase builds on the central findings of the first phase in each country; it consists of two sets of interventions: game simulations to study cross-sector collaboration...

On Fredholm-Stieltjes quadratic integral equation with supremum

International Nuclear Information System (INIS)

Darwish, M.A.

2007-08-01

We prove an existence theorem of monotonic solutions for a quadratic integral equation of Fredholm-Stieltjes type in C[0,1]. The concept of measure of non-compactness and a fixed point theorem due to Darbo are the main tools in carrying out our proof. (author)

A Methodology to Integrate Security and Cost-effectiveness in ATM

OpenAIRE

Matarese, Francesca; Montefusco, Patrizia; Neves, José; Rocha, André

2014-01-01

The objective of this paper is the definition of a new methodology for carrying out security risk assessment in the air traffic management (ATM) domain so as to enhance security awareness and integrate secure and cost-effective design objectives. This process is carried out by modelling the system, identifying the assets, threats and vulnerabilities, prioritizing the threats and proposing cost-effective countermeasures for the weaknesses found. ATM security is concerned with securing ATM a...

A Study of Critical Flowrate in the Integral Effect Test Facilities

International Nuclear Information System (INIS)

Kim, Yeongsik; Ryu, Sunguk; Cho, Seok; Yi, Sungjae; Park, Hyunsik

2014-01-01

In earlier studies, most of the information available in the literature was either for a saturated two-phase flow or a sub-cooled water flow at medium pressure conditions, e. g., up to about 7.0 MPa. The choking is regarded as a condition of maximum possible discharge through a given orifice and/or nozzle exit area. A critical flow rate can be achieved at a choking under the given thermo-hydraulic conditions. The critical flow phenomena were studied extensively in both single-phase and two-phase systems because of its importance in the LOCA analyses of light water reactors and in the design of other engineering areas. Park suggested a modified correlation for predicting the critical flow for sub-cooled water through a nozzle. Recently, Park et al. performed an experimental study on a two-phase critical flow with a noncondensable gas at high pressure conditions. Various experiments of critical flow using sub-cooled water were performed for a modeling of break simulators in thermohydraulic integral effect test facilities for light water reactors, e. g., an advanced power reactor 1400MWe (APR1400) and a system-integrated modular advanced reactor (SMART). For the design of break simulators of SBLOCA scenarios, the aspect ratio (L/D) is considered to be a key parameter to determine the shape of a break simulator. In this paper, an investigation of critical flow phenomena was performed especially on break simulators for LOCA scenarios in the integral effect test facilities of KAERI, such as ATLAS and FESTA. In this study, various studies on the critical flow models for sub-cooled and/or saturated water were reviewed. For a comparison among the models for the selected test data, discussions of the comparisons on the effect of the diameters, predictions of critical flow models, and break simulators for SBLOCA in the integral effect test facilities were presented

A Study of Critical Flowrate in the Integral Effect Test Facilities

Energy Technology Data Exchange (ETDEWEB)

Kim, Yeongsik; Ryu, Sunguk; Cho, Seok; Yi, Sungjae; Park, Hyunsik [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2014-05-15

In earlier studies, most of the information available in the literature was either for a saturated two-phase flow or a sub-cooled water flow at medium pressure conditions, e. g., up to about 7.0 MPa. The choking is regarded as a condition of maximum possible discharge through a given orifice and/or nozzle exit area. A critical flow rate can be achieved at a choking under the given thermo-hydraulic conditions. The critical flow phenomena were studied extensively in both single-phase and two-phase systems because of its importance in the LOCA analyses of light water reactors and in the design of other engineering areas. Park suggested a modified correlation for predicting the critical flow for sub-cooled water through a nozzle. Recently, Park et al. performed an experimental study on a two-phase critical flow with a noncondensable gas at high pressure conditions. Various experiments of critical flow using sub-cooled water were performed for a modeling of break simulators in thermohydraulic integral effect test facilities for light water reactors, e. g., an advanced power reactor 1400MWe (APR1400) and a system-integrated modular advanced reactor (SMART). For the design of break simulators of SBLOCA scenarios, the aspect ratio (L/D) is considered to be a key parameter to determine the shape of a break simulator. In this paper, an investigation of critical flow phenomena was performed especially on break simulators for LOCA scenarios in the integral effect test facilities of KAERI, such as ATLAS and FESTA. In this study, various studies on the critical flow models for sub-cooled and/or saturated water were reviewed. For a comparison among the models for the selected test data, discussions of the comparisons on the effect of the diameters, predictions of critical flow models, and break simulators for SBLOCA in the integral effect test facilities were presented.

Youths Carrying a Weapon or Using a Weapon in a Fight: What Makes the Difference?

Science.gov (United States)

Thurnherr, Judit; Michaud, Pierre-Andre; Berchtold, Andre; Akre, Christina; Suris, Joan-Carles

2009-01-01

The objective of this study was to characterize weapon-carrying adolescents and to assess whether weapon carriers differ from weapon users. Data were drawn from a cross-sectional school-based survey of 7548 adolescents aged 16-20 years in Switzerland. Youths carrying a weapon were compared with those who do not. Subsequently, weapon carriers were…

Study of the Integration of LIDAR and Photogrammetric Datasets by in Situ Camera Calibration and Integrated Sensor Orientation

Science.gov (United States)

Mitishita, E.; Costa, F.; Martins, M.

2017-05-01

Photogrammetric and Lidar datasets should be in the same mapping or geodetic frame to be used simultaneously in an engineering project. Nowadays direct sensor orientation is a common procedure used in simultaneous photogrammetric and Lidar surveys. Although the direct sensor orientation technologies provide a high degree of automation process due to the GNSS/INS technologies, the accuracies of the results obtained from the photogrammetric and Lidar surveys are dependent on the quality of a group of parameters that models accurately the user conditions of the system at the moment the job is performed. This paper shows the study that was performed to verify the importance of the in situ camera calibration and Integrated Sensor Orientation without control points to increase the accuracies of the photogrammetric and LIDAR datasets integration. The horizontal and vertical accuracies of photogrammetric and Lidar datasets integration by photogrammetric procedure improved significantly when the Integrated Sensor Orientation (ISO) approach was performed using Interior Orientation Parameter (IOP) values estimated from the in situ camera calibration. The horizontal and vertical accuracies, estimated by the Root Mean Square Error (RMSE) of the 3D discrepancies from the Lidar check points, increased around of 37% and 198% respectively.

A study on infinite number of integrals of motion in classically integrable system with boundary: Pt.1

International Nuclear Information System (INIS)

Chen Yixin; Luo Xudong

1998-01-01

By the zero curvature condition in classically integrable system, the generating functions for integrals of motion and equations for solving K +- matrices are obtained in two-dimensional integrable systems on a finite interval with independent boundary conditions on each end. Classically integrable boundary conditions will be found by solving K +- matrices. The authors develop a Hamiltonian method in classically integrable system with independent boundary conditions on each end. The result can be applied to more integrable systems than those associated with E.K. Sklyanin's approach

An Integrated Computer-Aided Approach for Environmental Studies

DEFF Research Database (Denmark)

Gani, Rafiqul; Chen, Fei; Jaksland, Cecilia

1997-01-01

A general framework for an integrated computer-aided approach to solve process design, control, and environmental problems simultaneously is presented. Physicochemical properties and their relationships to the molecular structure play an important role in the proposed integrated approach. The sco...... and applicability of the integrated approach is highlighted through examples involving estimation of properties and environmental pollution prevention. The importance of mixture effects on some environmentally important properties is also demonstrated....

Form and Function of Carrying Tools in Traditional and Contemporary Culture

Directory of Open Access Journals (Sweden)

Hendriana Werdhaningsih

2009-07-01

Full Text Available The Javanese Traditional Carrying Tools are categorized into two kinds based used of materials: anyaman made of woven bamboo or rattan and the other was made of cloth. The Traditional Javanese Carrying Tools that were made of bamboo/ rattan is actually a kind of container with different shapes. The types of goods that were brought was related to the shapes of the containers, demonstrate the type of interactions between the carrier and the goods. The Traditional Carrying Tools made of cloth have the flexibility in terms of being the containers of the carried goods. Selendang is used to carry goods, including the bamboo/ rattan containers and to carry babies. It can be used rumpled and straightened depends on the technical needs of carrying tools preferred by the user. In contemporary culture, the form and design of carrying tools more less construct by fashion and trends besides those practical used. Some product are being 'classic', some other are being 'fad'. Both products, traditional and contemporary have their own style, uniqueness, and own context. Analyzing both in design point of view is important as evaluation process, to finding new problems that will be starting point to create new products. Indonesia is well known for its abundant richness in traditions, which include the culture, the art, and the traditional products. Such treasure of traditions can inspire the development and invention of various kinds of artwork and current products.

The Analysis and Calculation Method of Urban Rail Transit Carrying Capacity Based on Express-Slow Mode

Directory of Open Access Journals (Sweden)

Xiaobing Ding

2016-01-01

Full Text Available Urban railway transport that connects suburbs and city areas is characterized by uneven temporal and spatial distribution in terms of passenger flow and underutilized carrying capacity. This paper aims to develop methodologies to measure the carrying capacity of the urban railway by introducing a concept of the express-slow mode. We first explore factors influencing the carrying capacity under the express-slow mode and the interactive relationships among these factors. Then we establish seven different scenarios to measure the carrying capacity by considering the ratio of the number of the express trains and the slow trains, the station where overtaking takes place, and the number of overtaking maneuvers. Taking Shanghai Metro Line 16 as an empirical study, the proposed methods to measure the carrying capacity under different express-slow mode are proved to be valid. This paper contributes to the literature by remodifying the traditional methods to measure the carrying capacity when different express-slow modes are applied to improve the carrying capacity of the suburban railway.

Targeted Drug-Carrying Bacteriophages as Antibacterial Nanomedicines▿

Science.gov (United States)

Yacoby, Iftach; Bar, Hagit; Benhar, Itai

2007-01-01

While the resistance of bacteria to traditional antibiotics is a major public health concern, the use of extremely potent antibacterial agents is limited by their lack of selectivity. As in cancer therapy, antibacterial targeted therapy could provide an opportunity to reintroduce toxic substances to the antibacterial arsenal. A desirable targeted antibacterial agent should combine binding specificity, a large drug payload per binding event, and a programmed drug release mechanism. Recently, we presented a novel application of filamentous bacteriophages as targeted drug carriers that could partially inhibit the growth of Staphylococcus aureus bacteria. This partial success was due to limitations of drug-loading capacity that resulted from the hydrophobicity of the drug. Here we present a novel drug conjugation chemistry which is based on connecting hydrophobic drugs to the phage via aminoglycoside antibiotics that serve as solubility-enhancing branched linkers. This new formulation allowed a significantly larger drug-carrying capacity of the phages, resulting in a drastic improvement in their performance as targeted drug-carrying nanoparticles. As an example for a potential systemic use for potent agents that are limited for topical use, we present antibody-targeted phage nanoparticles that carry a large payload of the hemolytic antibiotic chloramphenicol connected through the aminoglycoside neomycin. We demonstrate complete growth inhibition toward the pathogens Staphylococcus aureus, Streptococcus pyogenes, and Escherichia coli with an improvement in potency by a factor of ∼20,000 compared to the free drug. PMID:17404004