Trans-activation function of a 3' truncated X gene-cell fusion product from integrated hepatitis B virus DNA in chronic hepatitis tissues

International Nuclear Information System (INIS)

Takada, Shinako; Koike, Katsuro

1990-01-01

To investigate the expression and transactivation function of the X gene in integrated hepatitis B virus (HBV) DNA from chronic hepatitis tissues, a series of transfectants containing cloned integrated HBV DNAs was made and analyzed for X mRNA expression and trans-activation activity by using a chloramphenicol acetyltransferase assay. Most of the integrated HBV DNAs expressed X mRNA and encoded a product with trans-activation activity in spite of the loss of the 3' end region of the X gene due to integration. From cDNA cloning and sequence analysis of X mRNA transcribed from native or integrated HBV DNA, the X protein was found to be translated from the X open reading frame without splicing. For integrated HBV DNA, transcription was extended to a cellular flanking DNA and an X gene-cell fusion transcript was terminated by using a cellular poly(A) signal. The amino acid sequence deduced from an X-cell fusion transcript indicated truncation of the carboxyl-terminal five amino acids, but the upstream region of seven amino acids conserved among hepadnaviruses was retained in the integrated HBV DNA, suggesting that this conserved region is essential for the transactivation function of the X protein. These findings support the following explanation for hepatocarcinogenesis by HBV DNA integration: the expression of a cellular oncogene(s) is transactivated at the time of chronic infection by the increasing amounts of the integrated HBV gene product(s), such as the X-cell fusion product

Analytical evaluation of integrals over Coulomb wave functions

International Nuclear Information System (INIS)

Nesbet, R.K.

1988-01-01

Indefinite integrals of products of Coulomb wave functions over the interval (r, ∞) can be evaluated by conversion to continued fractions. Examples are given of normalization and dipole transition integrals required in photoionization calculations. (orig.)

Integrated Monitoring System of Production Processes

Directory of Open Access Journals (Sweden)

Oborski Przemysław

2016-12-01

Full Text Available Integrated monitoring system for discrete manufacturing processes is presented in the paper. The multilayer hardware and software reference model was developed. Original research are an answer for industry needs of the integration of information flow in production process. Reference model corresponds with proposed data model based on multilayer data tree allowing to describe orders, products, processes and save monitoring data. Elaborated models were implemented in the integrated monitoring system demonstrator developed in the project. It was built on the base of multiagent technology to assure high flexibility and openness on applying intelligent algorithms for data processing. Currently on the base of achieved experience an application integrated monitoring system for real production system is developed. In the article the main problems of monitoring integration are presented, including specificity of discrete production, data processing and future application of Cyber-Physical-Systems. Development of manufacturing systems is based more and more on taking an advantage of applying intelligent solutions into machine and production process control and monitoring. Connection of technical systems, machine tools and manufacturing processes monitoring with advanced information processing seems to be one of the most important areas of near future development. It will play important role in efficient operation and competitiveness of the whole production system. It is also important area of applying in the future Cyber-Physical-Systems that can radically improve functionally of monitoring systems and reduce the cost of its implementation.

Modularization, inter-functional integration and operational performance

DEFF Research Database (Denmark)

Boer, Henrike Engele Elisabeth; Boer, Harry

2014-01-01

for firms to indeed use product modularity beneficially, in particular inter-functional integration between manufacturing and purchasing, design and sales, respectively. The purpose of the paper is to investigate the direct performance effects of modularization, as well as the mediating effects of the three...... forms of integration in the modularization-performance relationship....

Rules for integrals over products of distributions from coordinate independence of path integrals

International Nuclear Information System (INIS)

Kleinert, H.; Chervyakov, A.

2001-01-01

In perturbative calculations of quantum-mechanical path integrals in curvilinear coordinates, one encounters Feynman diagrams involving multiple temporal integrals over products of distributions which are mathematically undefined. In addition, there are terms proportional to powers of Dirac δ-functions at the origin coming from the measure of path integration. We derive simple rules for dealing with such singular terms from the natural requirement of coordinate independence of the path integrals. (orig.)

Human Systems Integration: Requirements and Functional Decomposition

Science.gov (United States)

Berson, Barry; Gershzohn, Gary; Boltz, Laura; Wolf, Russ; Schultz, Mike

2005-01-01

This deliverable was intended as an input to the Access 5 Policy and Simulation Integrated Product Teams. This document contains high-level pilot functionality for operations in the National Airspace System above FL430. Based on the derived pilot functions the associated pilot information and control requirements are given.

Integral equations of hadronic correlation functions a functional- bootstrap approach

CERN Document Server

Manesis, E K

1974-01-01

A reasonable 'microscopic' foundation of the Feynman hadron-liquid analogy is offered, based on a class of models for hadron production. In an external field formalism, the equivalence (complementarity) of the exclusive and inclusive descriptions of hadronic reactions is specifically expressed in a functional-bootstrap form, and integral equations between inclusive and exclusive correlation functions are derived. Using the latest CERN-ISR data on the two-pion inclusive correlation function, and assuming rapidity translational invariance for the exclusive one, the simplest integral equation is solved in the 'central region' and an exclusive correlation length in rapidity predicted. An explanation is also offered for the unexpected similarity observed between pi /sup +/ pi /sup -/ and pi /sup -/ pi /sup -/ inclusive correlations. (31 refs).

Integrals over products of distributions and coordinate independence of zero-temperature path integrals

International Nuclear Information System (INIS)

Kleinert, H.; Chervyakov, A.

2003-01-01

In perturbative calculations of quantum-statistical zero-temperature path integrals in curvilinear coordinates one encounters Feynman diagrams involving multiple temporal integrals over products of distributions, which are mathematically undefined. In addition, there are terms proportional to powers of Dirac δ-functions at the origin coming from the measure of path integration. We give simple rules for integrating products of distributions in such a way that the results ensure coordinate independence of the path integrals. The rules are derived by using equations of motion and partial integration, while keeping track of certain minimal features originating in the unique definition of all singular integrals in 1-ε dimensions. Our rules yield the same results as the much more cumbersome calculations in 1-ε dimensions where the limit ε→0 is taken at the end. They also agree with the rules found in an independent treatment on a finite time interval

An integrated bio-process for production of functional biomolecules utilizing raw and by-products from dairy and sugarcane industries.

Science.gov (United States)

Lata, Kusum; Sharma, Manisha; Patel, Satya Narayan; Sangwan, Rajender S; Singh, Sudhir P

2018-04-21

The study investigated an integrated bioprocessing of raw and by-products from sugarcane and dairy industries for production of non-digestible prebiotic and functional ingredients. The low-priced feedstock, whey, molasses, table sugar, jaggery, etc., were subjected to transglucosylation reactions catalyzed by dextransucrase from Leuconostoc mesenteroides MTCC 10508. HPLC analysis approximated production of about 11-14 g L -1 trisaccharide i.e. 2-α-D-glucopyranosyl-lactose (4-galactosyl-kojibiose) from the feedstock prepared from table sugar, jaggery, cane molasses and liquid whey, containing about 30 g L -1 sucrose and lactose each. The trisaccharide was hydrolysed into the prebiotic disaccharide, kojibiose, by employing recombinant β-galactosidase from Escherichia coli. The enzyme β-galactosidase achieved about 90% conversion of 2-α-D-glucopyranosyl-lactose into kojibiose. The D-fructose generated by catalytic reactions of dextransucrase was targeted for catalytic transformation into rare sugar, D-allulose (or D-psicose), by treating the samples with Smt3-D-psicose 3-epimerase. The catalytic reactions resulted in the conversion of ~ 25% D-fructose to D-allulose. These bioactive compounds are known to exert a plethora of benefits to human health, and therefore, are preferred ingredients for making functional foods.

Generalized fractional integration of the \\overline{H}-function

Directory of Open Access Journals (Sweden)

Praveen Agarwal

2012-11-01

Full Text Available A significantly large number of earlier works on the subject of fractional calculus give interesting account of the theory and applications of fractional calculus operators in many different areas of mathematical analysis (such as ordinary and partial differential equations, integral equations, special functions, summation of series, et cetera. In the present paper, we study and develop the generalized fractional integral operators given by Saigo. First, we establish two Theorems that give the images of the product of H-function and a general class of polynomials inSaigo operators. On account of the general nature of the Saigo operators, H-function and a general class of polynomials a large number of new and known Images involving Riemann-Liouville and Erdélyi-Kober fractional integral operators and several special functions notably generalized Wright hypergeometric function, generalized Wright-Bessel function, the polylogarithm and Mittag-Leffler functions follow as special cases of our main findings.

Control and Diagnosis in Integrated Product Development - Observations during the Development of an AGV

Science.gov (United States)

Stetter, R.; Simundsson, A.

2015-11-01

This paper is concerned with the integration of control and diagnosis functionalities into the development of complete systems which include mechanical, electrical and electronic subsystems. For the development of such systems the strategies, methods and tools of integrated product development have attracted significant attention during the last decades. Today, it is generally observed that product development processes of complex systems can only be successful if the activities in the different domains are well connected and synchronised and if an ongoing communication is present - an ongoing communication spanning the technical domains and also including functions such as production planning, marketing/distribution, quality assurance, service and project planning. Obviously, numerous approaches to tackle this challenge are present in scientific literature and in industrial practice, as well. Today, the functionality and safety of most products is to a large degree dependent on control and diagnosis functionalities. Still, there is comparatively little research concentrating on the integration of the development of these functionalities into the overall product development processes. The main source of insight of the presented research is the product development process of an Automated Guided Vehicle (AGV) which is intended to be used on rough terrain. The paper starts with a background describing Integrated Product Development. The second section deals with the product development of the sample product. The third part summarizes some insights and formulates first hypotheses concerning control and diagnosis in Integrated Product Development.

The power of product integrity.

Science.gov (United States)

Clark, K B; Fujimoto, T

1990-01-01

In the dictionary, integrity means wholeness, completeness, soundness. In products, integrity is the source of sustainable competitive advantage. Products with integrity perform superbly, provide good value, and satisfy customers' expectations in every respect, including such intangibles as their look and feel. Consider this example from the auto industry. In 1987, Mazda put a racy four-wheel steering system in a five-door family hatchback. Honda introduced a comparable system in the Prelude, a sporty, two-door coupe. Most of Honda's customers installed the new technology; Mazda's system sold poorly. Potential customers felt the fit--or misfit--between the car and the new component, and they responded accordingly. Companies that consistently develop products with integrity are coherent, integrated organizations. This internal integrity is visible at the level of strategy and structure, in management and organization, and in the skills, attitudes, and behavior of individual designers, engineers, and operators. Moreover, these companies are integrated externally: customers become part of the development organization. Integrity starts with a product concept that describes the new product from the potential customer's perspective--"pocket rocket" for a sporty, subcompact car, for example. Whether the final product has integrity will depend on two things: how well the concept satisfies potential customers' wants and needs and how completely the concept has been embodied in the product's details. In the most successful development organizations, "heavyweight" product managers are responsible for leading both tasks, as well as for guiding the creation of a strong product concept.

Systematic Product Development of Control and Diagnosis Functionalities

Science.gov (United States)

Stetter, R.; Simundsson, A.

2017-01-01

In the scientific field of systematic product development a wide range of helpful methods, guidelines and tools were generated and published in recent years. Until now little special attention was given to design guidelines aiming at supporting product development engineers to design products that allow and support control or diagnosis functions. The general trend to ubiquitous computing and the first development steps towards cognitive systems as well as a general trend toward higher product safety, reliability and reduced total cost of ownership (TCO) in many engineering fields lead to a higher importance of control and diagnosis. In this paper a first attempt is made to formulate general valid guidelines how products can be developed in order to allow and to achieve effective and efficient control and diagnosis. The guidelines are elucidated on the example of an automated guided vehicle. One main concern of this paper is the integration of control and diagnosis functionalities into the development of complete systems which include mechanical, electrical and electronic subsystems. For the development of such systems the strategies, methods and tools of systematic product development have attracted significant attention during the last decades. Today, the functionality and safety of most products is to a large degree dependent on control and diagnosis functionalities. Still, there is comparatively little research concentrating on the integration of the development of these functionalities into the overall product development processes. The paper starts with a background describing Systematic Product Development. The second section deals with the product development of the sample product. The third part clarifies the notions monitoring, control and diagnosis. The following parts summarize some insights and formulate first hypotheses concerning control and diagnosis in Systematic Product Development.

Implications of intelligent, integrated microsystems for product design and development

International Nuclear Information System (INIS)

MYERS, DAVID R.; MCWHORTER, PAUL J.

2000-01-01

Intelligent, integrated microsystems combine some or all of the functions of sensing, processing information, actuation, and communication within a single integrated package, and preferably upon a single silicon chip. As the elements of these highly integrated solutions interact strongly with each other, the microsystem can be neither designed nor fabricated piecemeal, in contrast to the more familiar assembled products. Driven by technological imperatives, microsystems will best be developed by multi-disciplinary teams, most likely within the flatter, less hierarchical organizations. Standardization of design and process tools around a single, dominant technology will expedite economically viable operation under a common production infrastructure. The production base for intelligent, integrated microsystems has elements in common with the mathematical theory of chaos. Similar to chaos theory, the development of microsystems technology will be strongly dependent on, and optimized to, the initial product requirements that will drive standardization--thereby further rewarding early entrants to integrated microsystem technology

Supplier Relationship Management: a review focused on Logistics and Production integration

Directory of Open Access Journals (Sweden)

Franciele da Silva Garcia

2015-12-01

Full Text Available Integrating information regarding planning, decisions and processes within a focal company and between companies is a primary challenge for many organizations. Both internal (among business functions and external (between suppliers and customers integration aim to maximize the value added to customers and to minimize the required efforts involved in integration. However, identifying which activities demand a higher level of integration among business functions and what the possible results are is not always easy to understand, both within the organization and among their relationships. The purpose of this paper is therefore to understand the integration between Logistics and Production in supplier relationship management (SRM by performing a systematic literature review. A systematic literature review was conducted as a research method of this paper, followed by a critical analysis of the selected works in order to thoroughly identify how these functions participate in the main activities of the SRM process. As a result, it was realized that integrating Logistics and Production may contribute to supplier relationship management by sharing information on strategic supply specifications (time and sequence and also by improving the flow of information/materials to meet quality, quantity, cost and time requirements for the customer.

Integrated system of production information processing for surface mines

Energy Technology Data Exchange (ETDEWEB)

Li, K.; Wang, S.; Zeng, Z.; Wei, J.; Ren, Z. [China University of Mining and Technology, Xuzhou (China). Dept of Mining Engineering

2000-09-01

Based on the concept of geological statistic, mathematical program, condition simulation, system engineering, and the features and duties of each main department in surface mine production, an integrated system for surface mine production information was studied systematically and developed by using the technology of data warehousing, CAD, object-oriented and system integration, which leads to the systematizing and automating of the information management, data processing, optimization computing and plotting. In this paper, its overall object, system design, structure and functions and some key techniques were described. 2 refs., 3 figs.

Integral parametrization of the Kinetics of Crosslink production in plasmid DNA as a function of 8-methoxypsoralen concentration

Energy Technology Data Exchange (ETDEWEB)

Vidania, R. de; Paramio, J. M.; Bauluz, C.

1986-07-01

In this paper we present results of crosslink production in pBR322 DNA along a wide range of 8-methoxypsoralen (8-MOP) concentration. Experimental data were obtained as DNA renaturation percentages, from the shift in hyperchromicity after a temperature-dependent denaturation-renaturation process. the experimental results showed a three-stage profile when represented as a function of the natural logarithms of 8-MOP concentration. an integral parametrization which allows a simultaneous fit of the three observed stages is presented here. the theoretical values of crosslink production determined from the fit are useful to asses the genotoxicity of psoralen-induced crosslinks in plasmid DNA. (Author) 24 refs.

Integral parametrization of the Kinetics of Crosslink production in plasmid DNA as a function of 8-methoxypsoralen concentration

International Nuclear Information System (INIS)

Vidania, R. de; Paramio, J. M.; Bauluz, C.

1986-01-01

In this paper we present results of crosslink production in pBR322 DNA along a wide range of 8-methoxypsoralen (8-MOP) concentration. Experimental data were obtained as DNA renaturation percentages, from the shift in hyperchromicity after a temperature-dependent denaturation-renaturation process. the experimental results showed a three-stage profile when represented as a function of the natural logarithms of 8-MOP concentration. an integral parametrization which allows a simultaneous fit of the three observed stages is presented here. the theoretical values of crosslink production determined from the fit are useful to asses the genotoxicity of psoralen-induced crosslinks in plasmid DNA. (Author) 24 refs

The Integration of the Information and Communication Functions, and the Marketing of the Resulting Products.

Science.gov (United States)

Harris, Susan C.

1985-01-01

Discusses the theoretical basis for integration of information functions and communication functions, the relevance of this integration in the scientific information cycle, and its positive effect on commodity research networks. The application of this theory is described using three commodity programs of the Centro Internacional de Agricultura…

Integrative production technology theory and applications

CERN Document Server

Özdemir, Denis

2017-01-01

This contributed volume contains the research results of the Cluster of Excellence “Integrative Production Technology for High-Wage Countries”, funded by the German Research Society (DFG). The approach to the topic is genuinely interdisciplinary, covering insights from fields such as engineering, material sciences, economics and social sciences. The book contains coherent deterministic models for integrative product creation chains as well as harmonized cybernetic models of production systems. The content is structured into five sections: Integrative Production Technology, Individualized Production, Virtual Production Systems, Integrated Technologies, Self-Optimizing Production Systems and Collaboration Productivity.The target audience primarily comprises research experts and practitioners in the field of production engineering, but the book may also be beneficial for graduate students. .

Domains of bosonic functional integrals

International Nuclear Information System (INIS)

Botelho, Luiz C.L.; Para Univ., Belem, PA

1998-07-01

We propose a mathematical framework for bosonic Euclidean quantum field functional integrals based on the theory of integration on the dual algebraic vector space of classical field sources. We present a generalization of the Minlos-Dao Xing theorem and apply it to determine exactly the domain of integration associated to the functional integral representation of the two-dimensional quantum electrodynamics Schwinger generating functional. (author)

Functional Integration

Science.gov (United States)

Cartier, Pierre; DeWitt-Morette, Cecile

2010-06-01

Acknowledgements; List symbols, conventions, and formulary; Part I. The Physical and Mathematical Environment: 1. The physical and mathematical environment; Part II. Quantum Mechanics: 2. First lesson: gaussian integrals; 3. Selected examples; 4. Semiclassical expansion: WKB; 5. Semiclassical expansion: beyond WKB; 6. Quantum dynamics: path integrals and operator formalism; Part III. Methods from Differential Geometry: 7. Symmetries; 8. Homotopy; 9. Grassmann analysis: basics; 10. Grassmann analysis: applications; 11. Volume elements, divergences, gradients; Part IV. Non-Gaussian Applications: 12. Poisson processes in physics; 13. A mathematical theory of Poisson processes; 14. First exit time: energy problems; Part V. Problems in Quantum Field Theory: 15. Renormalization 1: an introduction; 16. Renormalization 2: scaling; 17. Renormalization 3: combinatorics; 18. Volume elements in quantum field theory Bryce DeWitt; Part VI. Projects: 19. Projects; Appendix A. Forward and backward integrals: spaces of pointed paths; Appendix B. Product integrals; Appendix C. A compendium of gaussian integrals; Appendix D. Wick calculus Alexander Wurm; Appendix E. The Jacobi operator; Appendix F. Change of variables of integration; Appendix G. Analytic properties of covariances; Appendix H. Feynman's checkerboard; Bibliography; Index.

The integration of quality function deployment and Kansei Engineering: An overview of application

Science.gov (United States)

Lokman, Anitawati Mohd; Awang, Ahmad Azran; Omar, Abdul Rahman; Abdullah, Nur Atiqah Sia

2016-02-01

As a result of today's globalized world and robust development of emerging markets, consumers are able to select from an endless number of products that are mostly similar in terms of design and properties, as well as equivalent in function and performance. The survival of businesses in a competitive ambience requires innovation, consumer loyalty, and products that are easily identifiable by consumers. Today's manufacturers have started to employ customer research instruments to survive in the highly industrialized world—for example, Conjoint Analysis, Design of Experiments and Semantic Design of Environment. However, this work only attempts to concentrate on Kansei Engineering and Quality Function Deployment. Kansei Engineering (KE) is deemed as the most appropriate method to link consumers' feelings, emotions or senses to the properties of a product because it translates people's impressions, interests, and feelings to the solutions of product design. Likewise, Quality Function Deployment (QFD) enables clearer interpretation of the needs of consumers, better concepts or products, and enhanced communication to internal operations that must then manufacture and deliver the product or services. The integration of both KE and QFD is believed possible, as many product manufacturers and businesses have started to utilize systematized methods to translate consumers' needs and wants into processes and products. Therefore, this work addresses areas of various integrations of KE and QFD processes in the industry, in an effort to assist an integration of KE and QFD. This work aims to provide evidence on the integration mechanism to enable successful incorporation of consumer's implicit feelings and demands into product quality improvement, and simultaneously providing an overview of both KE and QFD from the perspective of a novice.

A DSM-based framework for integrated function modelling

DEFF Research Database (Denmark)

Eisenbart, Boris; Gericke, Kilian; Blessing, Lucienne T. M.

2017-01-01

an integrated function modelling framework, which specifically aims at relating between the different function modelling perspectives prominently addressed in different disciplines. It uses interlinked matrices based on the concept of DSM and MDM in order to facilitate cross-disciplinary modelling and analysis...... of the functionality of a system. The article further presents the application of the framework based on a product example. Finally, an empirical study in industry is presented. Therein, feedback on the potential of the proposed framework to support interdisciplinary design practice as well as on areas of further...

Products and environment. Report on integrated product policy

International Nuclear Information System (INIS)

2001-01-01

The National Commission for Sustainable Development established on 16 November 1999 a subgroup which had as one of its tasks to formulate a national strategy or a strategic view on how Finland should promote integrated product policy in accordance with the requirements of sustainable development. The aim of integrated product policy is to improve the environmental friendliness of products and product systems by taking into account the environmental effects during their entire lifecycles. Its leading principles are lifecycle thinking, market-basedness, integration of environmental aspects into economic activity, and that all actors within the product chain (consumers, trade, companies) decrease the environmental consequences of their activities according to the principle of shared responsibility and to their preconditions. Political decision-making and administration should provide firms and clients with the required preconditions and i.a. remove obstacles to knowledge and promote research. In product policy, emphasis is on especially those instruments that encourage actors to develop their activities. At national level, economic instruments should be directed to domestic demand and use of products. It is often most appropriate to develop economic instruments for production and legislation and other regulation within international co-operation. (orig.)

Two-loop integrals for CP-even heavy quarkonium production and decays: elliptic sectors

Science.gov (United States)

Chen, Long-Bin; Jiang, Jun; Qiao, Cong-Feng

2018-04-01

By employing the differential equations, we compute analytically the elliptic sectors of two-loop master integrals appearing in the NNLO QCD corrections to CP-even heavy quarkonium exclusive production and decays, which turns out to be the last and toughest part in the relevant calculation. The integrals are found can be expressed as Goncharov polylogarithms and iterative integrals over elliptic functions. The master integrals may be applied to some other NNLO QCD calculations about heavy quarkonium exclusive production, like {γ}^{\\ast}γ \\to Q\\overline{Q} , {e}+{e}-\\to γ +Q\\overline{Q} , and H/{Z}^0\\to γ +Q\\overline{Q} , heavy quarkonium exclusive decays, and also the CP-even heavy quarkonium inclusive production and decays.

An Integrated model for Product Quality Development—A case study on Quality functions deployment and AHP based approach

Science.gov (United States)

Maitra, Subrata; Banerjee, Debamalya

2010-10-01

Present article is based on application of the product quality and improvement of design related with the nature of failure of machineries and plant operational problems of an industrial blower fan Company. The project aims at developing the product on the basis of standardized production parameters for selling its products in the market. Special attention is also being paid to the blower fans which have been ordered directly by the customer on the basis of installed capacity of air to be provided by the fan. Application of quality function deployment is primarily a customer oriented approach. Proposed model of QFD integrated with AHP to select and rank the decision criterions on the commercial and technical factors and the measurement of the decision parameters for selection of best product in the compettitive environment. The present AHP-QFD model justifies the selection of a blower fan with the help of the group of experts' opinion by pairwise comparison of the customer's and ergonomy based technical design requirements. The steps invoved in implementation of the QFD—AHP and selection of weighted criterion may be helpful for all similar purpose industries maintaining cost and utility for competitive product.

INTEGRATED PRODUCT AND ENTERPRISE DESIGN FOR GLOBAL COMPETITIVENESS

Directory of Open Access Journals (Sweden)

N.D. Du Preez

2012-01-01

Full Text Available This paper presentsan overview of the challenge to integrate product and process life cycles in maintaining global competitiveness of an enterprise and proposes IEKOS as a possible solution . It provides the reader with a framework of two virtual life cycles which create a problem solving matrix for the industrial engineer. In this matrix, bordered by the virtual enterprise life cycle and the virtual product life cycles, the business functions of analyze, design deploy and operate are predominantly functions executed by the, industrial engineer. The different phases of each life cycle serves as a framework to a virtual industrial engineering toolkit providing access to detailed functions, formats, examples and a series of software and other "tools" available to the industrial engineer.
In conclusion a brief overview is provided of the progress of the IEKOS toolkit which is under development at the department of Industrial Engineering at Stellenbosch University.

Integrating product design into the supply chain

DEFF Research Database (Denmark)

Khan, Omera; Stolte, Terje; Creazza, Alessandro

2016-01-01

into the supply chain. Originality/Value: This paper provides novel insights to both practitioners and researchers. For practitioners detailed recommendations are given on how they can maximise benefits through integrating product design into the supply chain. The RBV has been harnessed to highlight how......Purpose: The aim of the research is to illustrate how companies can create competitive capabilities through integration of product design into the supply chain. In doing so the paper reveals the challenges and the opportunities that companies face when integrating product design and supply chain...... of opportunities and challenges when integrating product design and the supply chain and subsequently a step-by-step guide is developed to address these. Practical Implications: The research provides key recommendations to companies on how to create competitive capabilities by integrating product design...

Integrating product design into the supply chain

DEFF Research Database (Denmark)

Khan, Omera; Stolte, Terje; Creazza, Alessandro

2016-01-01

Purpose: The aim of the research is to illustrate how companies can create competitive capabilities through integration of product design into the supply chain. In doing so the paper reveals the challenges and the opportunities that companies face when integrating product design and supply chain...... of opportunities and challenges when integrating product design and the supply chain and subsequently a step-by-step guide is developed to address these. Practical Implications: The research provides key recommendations to companies on how to create competitive capabilities by integrating product design...... into the supply chain. Originality/Value: This paper provides novel insights to both practitioners and researchers. For practitioners detailed recommendations are given on how they can maximise benefits through integrating product design into the supply chain. The RBV has been harnessed to highlight how...

Integrating Product and Technology Development

DEFF Research Database (Denmark)

Meijer, Ellen Brilhuis; Pigosso, Daniela Cristina Antelmi; McAloone, Tim C.

2016-01-01

.g. managing dependencies) and opportunities (e.g. streamlining development). This paper presents five existing reference models for technology development (TD), which were identified via a systematic literature review, where their possible integration with product development (PD) reference models......Although dual innovation projects, defined in this article as the concurrent development of products and technologies, often occur in industry, these are only scarcely supported methodologically. Limited research has been done about dual innovation projects and their inherent challenges (e...... was investigated. Based on the specific characteristics desired for dual innovation projects, such as integrated product development and coverage of multiple development stages, a set of selection criteria was employed to select suitable PD and TD reference models. The integration and adaptation of the selected...

Towards Integration of CAx Systems and a Multiple-View Product Modeller in Mechanical Design

Directory of Open Access Journals (Sweden)

H. Song

2005-01-01

Full Text Available This paper deals with the development of an integration framework and its implementation for the connexion of CAx systems and multiple-view product modelling. The integration framework is presented regarding its conceptual level and the implementation level is described currently with the connexion of a functional modeller, a multiple-view product modeller, an optimisation module and a CAD system. The integration between the multiple-view product modeller and CATIA V5 based on the STEP standard is described in detail. Finally, the presented works are discussed and future research developments are suggested. 

Joint pricing and production management: a geometric programming approach with consideration of cubic production cost function

Science.gov (United States)

Sadjadi, Seyed Jafar; Hamidi Hesarsorkh, Aghil; Mohammadi, Mehdi; Bonyadi Naeini, Ali

2015-06-01

Coordination and harmony between different departments of a company can be an important factor in achieving competitive advantage if the company corrects alignment between strategies of different departments. This paper presents an integrated decision model based on recent advances of geometric programming technique. The demand of a product considers as a power function of factors such as product's price, marketing expenditures, and consumer service expenditures. Furthermore, production cost considers as a cubic power function of outputs. The model will be solved by recent advances in convex optimization tools. Finally, the solution procedure is illustrated by numerical example.

Integrals of Bessel functions

OpenAIRE

Babusci, D.; Dattoli, G.; Germano, B.; Martinelli, M. R.; Ricci, P. E.

2011-01-01

We use the operator method to evaluate a class of integrals involving Bessel or Bessel-type functions. The technique we propose is based on the formal reduction of these family of functions to Gaussians.

Increasing competitiveness with intercompany integration of logistics and marketing functions

Directory of Open Access Journals (Sweden)

Darja Topolšek

2016-03-01

Full Text Available Researchers of different scientific disciplines, such as management strategies, organizational theories and marketing, have in the past explored relations of mutual influences and the importance of cooperation between different functions in a company. The increased focus on the logistics function has potential to increase competitiveness. This is especially true for globally aimed production companies. In any company, logistics functions cooperate with various related functions such as production, marketing, procurement, engineering or developing new products as well as with financial functions. Each of the aforementioned connections or cooperation among logistics and its complementary functions can have a decisive effect on the company's competitiveness. Using a survey, we determined which activities in the surveyed companies are performed by the logistical function together with the marketing function and which activities they suggest should be performed together but are currently not, meaning they are co-dependent. Since interfunctional integration between logistics and marketing increases the success of a company, we also examined the connection between the current joint performance of activities and the suggested joint performance of activities among the before mentioned sectors, connected to the effectiveness of the company. To examine the mentioned connections among the logistical and marketing functions, Explanatory Factor Analysis (EFA, Confirmatory Factor Analysis (CFA and Structural Equation Modelling (SEM were performed.

Comment on 'Analytical results for a Bessel function times Legendre polynomials class integrals'

International Nuclear Information System (INIS)

Cregg, P J; Svedlindh, P

2007-01-01

A result is obtained, stemming from Gegenbauer, where the products of certain Bessel functions and exponentials are expressed in terms of an infinite series of spherical Bessel functions and products of associated Legendre functions. Closed form solutions for integrals involving Bessel functions times associated Legendre functions times exponentials, recently elucidated by Neves et al (J. Phys. A: Math. Gen. 39 L293), are then shown to result directly from the orthogonality properties of the associated Legendre functions. This result offers greater flexibility in the treatment of classical Heisenberg chains and may do so in other problems such as occur in electromagnetic diffraction theory. (comment)

On the evaluation of the integral over the product of two spherical Bessel functions

International Nuclear Information System (INIS)

Maximon, L.C.

1991-01-01

The integral I l,l' (k,k')=∫ ∞ 0 j l (kr)j l' (k'r)r 2 dr, in which the spherical Bessel functions j l (kr) are the radial eigenfunctions of the three-dimensional wave equation in spherical coordinates, is evaluated in terms of distributions, in particular, step functions and delta functions. It will be shown that the behavior of I l,l' is very different in the cases l-l' even (0, ±2, ±4, ...) and l-l' odd (±1, ±3, ...). For l-l' even it is expressed in terms of the delta function, step functions, and Legendre polynomials. For l-l' odd it is expressed in terms of Legendre functions of the second kind and step functions; no delta functions appear

Forecasting Rice Productivity and Production of Odisha, India, Using Autoregressive Integrated Moving Average Models

Directory of Open Access Journals (Sweden)

Rahul Tripathi

2014-01-01

Full Text Available Forecasting of rice area, production, and productivity of Odisha was made from the historical data of 1950-51 to 2008-09 by using univariate autoregressive integrated moving average (ARIMA models and was compared with the forecasted all Indian data. The autoregressive (p and moving average (q parameters were identified based on the significant spikes in the plots of partial autocorrelation function (PACF and autocorrelation function (ACF of the different time series. ARIMA (2, 1, 0 model was found suitable for all Indian rice productivity and production, whereas ARIMA (1, 1, 1 was best fitted for forecasting of rice productivity and production in Odisha. Prediction was made for the immediate next three years, that is, 2007-08, 2008-09, and 2009-10, using the best fitted ARIMA models based on minimum value of the selection criterion, that is, Akaike information criteria (AIC and Schwarz-Bayesian information criteria (SBC. The performances of models were validated by comparing with percentage deviation from the actual values and mean absolute percent error (MAPE, which was found to be 0.61 and 2.99% for the area under rice in Odisha and India, respectively. Similarly for prediction of rice production and productivity in Odisha and India, the MAPE was found to be less than 6%.

Deterministic computation of functional integrals

International Nuclear Information System (INIS)

Lobanov, Yu.Yu.

1995-09-01

A new method of numerical integration in functional spaces is described. This method is based on the rigorous definition of a functional integral in complete separable metric space and on the use of approximation formulas which we constructed for this kind of integral. The method is applicable to solution of some partial differential equations and to calculation of various characteristics in quantum physics. No preliminary discretization of space and time is required in this method, as well as no simplifying assumptions like semi-classical, mean field approximations, collective excitations, introduction of ''short-time'' propagators, etc are necessary in our approach. The constructed approximation formulas satisfy the condition of being exact on a given class of functionals, namely polynomial functionals of a given degree. The employment of these formulas replaces the evaluation of a functional integral by computation of the ''ordinary'' (Riemannian) integral of a low dimension, thus allowing to use the more preferable deterministic algorithms (normally - Gaussian quadratures) in computations rather than traditional stochastic (Monte Carlo) methods which are commonly used for solution of the problem under consideration. The results of application of the method to computation of the Green function of the Schroedinger equation in imaginary time as well as the study of some models of Euclidean quantum mechanics are presented. The comparison with results of other authors shows that our method gives significant (by an order of magnitude) economy of computer time and memory versus other known methods while providing the results with the same or better accuracy. The funcitonal measure of the Gaussian type is considered and some of its particular cases, namely conditional Wiener measure in quantum statistical mechanics and functional measure in a Schwartz distribution space in two-dimensional quantum field theory are studied in detail. Numerical examples demonstrating the

A Generalized Analytic Operator-Valued Function Space Integral and a Related Integral Equation

International Nuclear Information System (INIS)

Chang, K.S.; Kim, B.S.; Park, C.H.; Ryu, K.S.

2003-01-01

We introduce a generalized Wiener measure associated with a Gaussian Markov process and define a generalized analytic operator-valued function space integral as a bounded linear operator from L p into L p-ci r cumflexprime (1< p ≤ 2) by the analytic continuation of the generalized Wiener integral. We prove the existence of the integral for certain functionals which involve some Borel measures. Also we show that the generalized analytic operator-valued function space integral satisfies an integral equation related to the generalized Schroedinger equation. The resulting theorems extend the theory of operator-valued function space integrals substantially and previous theorems about these integrals are generalized by our results

The branding role that product labelling plays within integrated marketing communication

OpenAIRE

2012-01-01

M.A. This study focuses on empirically determining the branding role that product labelling plays as a strategic element in Integrated Marketing Communication functioning within the food and beverage industry. This research topic was selected for a number of reasons. Firstly, there is a general misconception of the definition of the term Integrated Marketing Communication. Secondly, there is also an emergence of the perception that labelling plays an important role as a strategic element i...

An Integrated Approach for Non-Recursive Formulation of Connection-Coefficients of Orthogonal Functions

Directory of Open Access Journals (Sweden)

Monika GARG

2012-08-01

Full Text Available In this paper, an integrated approach is proposed for non-recursive formulation of connection coefficients of different orthogonal functions in terms of a generic orthogonal function. The application of these coefficients arises when the product of two orthogonal basis functions are to be expressed in terms of single basis functions. Two significant advantages are achieved; one, the non-recursive formulations avoid memory and stack overflows in computer implementations; two, the integrated approach provides for digital hardware once-designed can be used for different functions. Computational savings achieved with the proposed non-recursive formulation vis-à-vis recursive formulation, reported in the literature so far, have been demonstrated using MATLAB PROFILER.

Supplier integration for new product developments: antecedents for supplier integration in modular product designs

NARCIS (Netherlands)

Eggers, Justus Erich

2016-01-01

Original equipment manufacturers (OEMs) increasingly integrate supplier resources in new product developments (NPD) to overcome bottlenecks of resource and to create competitive advantages. At the same time, OEMs react to the new market challenges by implementing modular product designs. Despite the

Definite Integrals using Orthogonality and Integral Transforms

Directory of Open Access Journals (Sweden)

Howard S. Cohl

2012-10-01

Full Text Available We obtain definite integrals for products of associated Legendre functions with Bessel functions, associated Legendre functions, and Chebyshev polynomials of the first kind using orthogonality and integral transforms.

Designing Mechatronic Products - Achieving Integration by Means of Modelling Dependencies

DEFF Research Database (Denmark)

Torry-Smith, Jonas

of a joint effort between mechanical, electronics and software development. Companies engaged in multi-disciplinary product development face the challenge of coordinating different engineering disciplines to pursue a synergistic effect and to avoid failures when solutions from the different engineering...... disciplines have to be combined and function in an integrated fashion. The holistic view of the product concept is sometimes missing in projects and engineering disciplines are reluctant to interact. Investigations of literature, cases from industry and practical experience are used for dissecting...

Counting master integrals. Integration by parts vs. functional equations

International Nuclear Information System (INIS)

Kniehl, Bernd A.; Tarasov, Oleg V.

2016-01-01

We illustrate the usefulness of functional equations in establishing relationships between master integrals under the integration-by-parts reduction procedure by considering a certain two-loop propagator-type diagram as an example.

Nonlocal kinetic energy functionals by functional integration

Science.gov (United States)

Mi, Wenhui; Genova, Alessandro; Pavanello, Michele

2018-05-01

Since the seminal studies of Thomas and Fermi, researchers in the Density-Functional Theory (DFT) community are searching for accurate electron density functionals. Arguably, the toughest functional to approximate is the noninteracting kinetic energy, Ts[ρ], the subject of this work. The typical paradigm is to first approximate the energy functional and then take its functional derivative, δ/Ts[ρ ] δ ρ (r ) , yielding a potential that can be used in orbital-free DFT or subsystem DFT simulations. Here, this paradigm is challenged by constructing the potential from the second-functional derivative via functional integration. A new nonlocal functional for Ts[ρ] is prescribed [which we dub Mi-Genova-Pavanello (MGP)] having a density independent kernel. MGP is constructed to satisfy three exact conditions: (1) a nonzero "Kinetic electron" arising from a nonzero exchange hole; (2) the second functional derivative must reduce to the inverse Lindhard function in the limit of homogenous densities; (3) the potential is derived from functional integration of the second functional derivative. Pilot calculations show that MGP is capable of reproducing accurate equilibrium volumes, bulk moduli, total energy, and electron densities for metallic (body-centered cubic, face-centered cubic) and semiconducting (crystal diamond) phases of silicon as well as of III-V semiconductors. The MGP functional is found to be numerically stable typically reaching self-consistency within 12 iterations of a truncated Newton minimization algorithm. MGP's computational cost and memory requirements are low and comparable to the Wang-Teter nonlocal functional or any generalized gradient approximation functional.

State-related functional integration and functional segregation brain networks in schizophrenia.

Science.gov (United States)

Yu, Qingbao; Sui, Jing; Kiehl, Kent A; Pearlson, Godfrey; Calhoun, Vince D

2013-11-01

Altered topological properties of brain connectivity networks have emerged as important features of schizophrenia. The aim of this study was to investigate how the state-related modulations to graph measures of functional integration and functional segregation brain networks are disrupted in schizophrenia. Firstly, resting state and auditory oddball discrimination (AOD) fMRI data of healthy controls (HCs) and schizophrenia patients (SZs) were decomposed into spatially independent components (ICs) by group independent component analysis (ICA). Then, weighted positive and negative functional integration (inter-component networks) and functional segregation (intra-component networks) brain networks were built in each subject. Subsequently, connectivity strength, clustering coefficient, and global efficiency of all brain networks were statistically compared between groups (HCs and SZs) in each state and between states (rest and AOD) within group. We found that graph measures of negative functional integration brain network and several positive functional segregation brain networks were altered in schizophrenia during AOD task. The metrics of positive functional integration brain network and one positive functional segregation brain network were higher during the resting state than during the AOD task only in HCs. These findings imply that state-related characteristics of both functional integration and functional segregation brain networks are impaired in schizophrenia which provides new insight into the altered brain performance in this brain disorder. © 2013.

Achieving Customer Satisfaction through Integrated Products and Services

DEFF Research Database (Denmark)

Raja, Jawwad; Bourne, Dorota; Goffin, Keith

2013-01-01

Complex products such as manufacturing equipment have always needed maintenance and repair services. Increasingly, leading manufacturers are integrating products and services to generate increased revenues and achieve customer satisfaction. Designing integrated products and services requires...... a different approach to new product development and a clear understanding of how customers perceive the value they obtain from actual usage of products and services—so-called value-in-use. However, there is a lack of research on integrated products and services and how they impact customer satisfaction....... An exploratory study was undertaken to understand customers' views on integrated products and services and the value-in-use derived from such offerings. As value-in-use and its impacts are complicated concepts, a technique from psychology—Repertory Grid Technique—was used to gather data in 33 interviews...

Two efficient heuristics to solve the integrated load distribution and production planning problem

International Nuclear Information System (INIS)

Gajpal, Yuvraj; Nourelfath, Mustapha

2015-01-01

This paper considers a multi-period production system where a set of machines are arranged in parallel. The machines are unreliable and the failure rate of machine depends on the load assigned to the machine. The expected production rate of the system is considered to be a non-monotonic function of its load. Because of the machine failure rate, the total production output depends on the combination of loads assigned to different machines. We consider the integration of load distribution decisions with production planning decision. The product demands are considered to be known in advance. The objective is to minimize the sum of holding costs, backorder costs, production costs, setup costs, capacity change costs and unused capacity costs while satisfying the demand over specified time horizon. The constraint is not to exceed available repair resources required to repair the machine breakdown. The paper develops two heuristics to solve the integrated load distribution and production planning problem. The first heuristic consists of a three-phase approach, while the second one is based on tabu search metaheuristic. The efficiency of the proposed heuristics is tested through the randomly generated problem instances. - Highlights: • The expected performance of the system is a non-monotonic function of its load. • We consider the integration of load distribution and production planning decisions. • The paper proposes three phase and tabu search based heuristics to solve the problem. • Lower bound has been developed for checking the effectiveness of the heuristics. • The efficiency of the heuristic is tested through randomly generated instances.

Microcanonical functional integral for the gravitational field

International Nuclear Information System (INIS)

Brown, J.D.; York, J.W. Jr.

1993-01-01

The gravitational field in a spatially finite region is described as a microcanonical system. The density of states ν is expressed formally as a functional integral over Lorentzian metrics and is a functional of the geometrical boundary data that are fixed in the corresponding action. These boundary data are the thermodynamical extensive variables, including the energy and angular momentum of the system. When the boundary data are chosen such that the system is described semiclassically by any real stationary axisymmetric black hole, then in this same approximation lnν is shown to equal 1/4 the area of the black-hole event horizon. The canonical and grand canonical partition functions are obtained by integral transforms of ν that lead to ''imaginary-time'' functional integrals. A general form of the first law of thermodynamics for stationary black holes is derived. For the simpler case of nonrelativistic mechanics, the density of states is expressed as a real-time functional integral and then used to deduce Feynman's imaginary-time functional integral for the canonical partition function

The Effect of Headquarter Integration Mechanisms on Subsidiaries’ New Product Success: From Control to Coordination Mechanism

Directory of Open Access Journals (Sweden)

Firmanzah Firmanzah

2013-07-01

Full Text Available New product launching (NPL to the local market by subsidiary managers is a strategic activity, which requires organizational supports from MNC global network. The NPL activity is marked by high level of uncertainty, risk, and market failure. Thus, a headquarter needs to integrate the subsidiary NPL into global strategy. There are two mechanisms to integrate subsidiaries’ activities during NPL process; coordination and control process. By testing the effect of each mechanism on role clarity and functional conflict, I found that coordination mechanism increase role clarity between headquarter and subsidiaries’ managers. In contrast, exercising control mechanism reduces role clarity and functional conflict between headquarter and subsidiaries’ managers during NPL. This research shows that both role clarity and functional conflict increase new product commercial performance introduced by subsidiary in the local market. Keywords: new product launching (NPL, coordination mechanism, control mechanism, and new product performance

Alignment of Product Models and Product State Models - Integration of the Product Lifecycle Phases

DEFF Research Database (Denmark)

Larsen, Michael Holm; Kirkby, Lars Phillip; Vesterager, Johan

1999-01-01

The purpose of this paper is to discuss the integration of the Product Model (PM) and the Product State Model (PCM). Focus is on information exchange from the PSM to the PM within the manufacturing of a single ship. The paper distinguishes between information and knowledge integration. The paper ...... provides some overall strategies for integrating PM and PSM. The context of this discussion is a development project at Odense Steel Shipyard....

Barriers towards integrated product development

DEFF Research Database (Denmark)

Sommer, Anita Friis; Dukovska-Popovska, Iskra; Steger-Jensen, Kenn

2014-01-01

The basis for product development in many large industrial companies is a traditional project management method positing non-overlapping phases, independent activities, and a dedicated project team. Research findings indicate that integrated product development methods increase performance compared...

An MILP approach to shelf life integrated planning and scheduling in scalded sausage production

DEFF Research Database (Denmark)

Günther, H.O.; van Beek, P.; Grunow, Martin

2006-01-01

in which shelf life aspects are integrated into operational production planning and scheduling functions. Specifically we make use of so-called Mixed Integer Linear Programming (MILP) models. Our research is based on an industrial case study of yogurt production. Relying on the principle of block planning...

Overlap integrals of model wave functions of 4He and 3He,3H nuclei

International Nuclear Information System (INIS)

Voloshin, N.I.; Levshin, E.B.; Fursa, A.D.

1990-01-01

Overlap integrals of wave functions 4 He nucleus and 3 He and 3 H nuclei are calculated. Two types of model wave functions are used to describe the structure of nuclei. The wace function is taken as a product of the one-particle Gaussian functions of the Gaussian type in the second case

Accelerating functional verification of an integrated circuit

Science.gov (United States)

Deindl, Michael; Ruedinger, Jeffrey Joseph; Zoellin, Christian G.

2015-10-27

Illustrative embodiments include a method, system, and computer program product for accelerating functional verification in simulation testing of an integrated circuit (IC). Using a processor and a memory, a serial operation is replaced with a direct register access operation, wherein the serial operation is configured to perform bit shifting operation using a register in a simulation of the IC. The serial operation is blocked from manipulating the register in the simulation of the IC. Using the register in the simulation of the IC, the direct register access operation is performed in place of the serial operation.

Integral transform techniques for Green's function

CERN Document Server

Watanabe, Kazumi

2015-01-01

This book describes mathematical techniques for integral transforms in a detailed but concise manner. The techniques are subsequently applied to the standard partial differential equations, such as the Laplace equation, the wave equation and elasticity equations. Green’s functions for beams, plates and acoustic media are also shown, along with their mathematical derivations. The Cagniard-de Hoop method for double inversion is described in detail, and 2D and 3D elastodynamic problems are treated in full. This new edition explains in detail how to introduce the branch cut for the multi-valued square root function. Further, an exact closed form Green’s function for torsional waves is presented, as well as an application technique of the complex integral, which includes the square root function and an application technique of the complex integral.

Evaluation of integrals with hypergeometric and logarithmic functions

Directory of Open Access Journals (Sweden)

Sofo Anthony

2018-02-01

Full Text Available We provide an explicit analytical representation for a number of logarithmic integrals in terms of the Lerch transcendent function and other special functions. The integrals in question will be associated with both alternating harmonic numbers and harmonic numbers with positive terms. A few examples of integrals will be given an identity in terms of some special functions including the Riemann zeta function. In general none of these integrals can be solved by any currently available mathematical package.

Weighted -Integral Representations of -Functions in

Directory of Open Access Journals (Sweden)

Arman H. Karapetyan

2012-01-01

Full Text Available For 1-functions , given in the complex space , integral representations of the form =(−( are obtained. Here, is the orthogonal projector of the space 2{;−||||(} onto its subspace of entire functions and the integral operator appears by means of explicitly constructed kernel Φ which is investigated in detail.

New application of functional integrals to classical mechanics

International Nuclear Information System (INIS)

Zherebtsov, Anton; Ilinski, Kirill

2005-01-01

In this Letter a new functional integral representation for classical dynamics is introduced. It is achieved by rewriting the Liouville picture in terms of bosonic creation-annihilation operators and utilizing the standard derivation of functional integrals for dynamical quantities in the coherent states representation. This results in a new class of functional integrals which are exactly solvable and can be found explicitly when the underlying classical systems are integrable

Certain Integral Transform and Fractional Integral Formulas for the Generalized Gauss Hypergeometric Functions

Directory of Open Access Journals (Sweden)

Junesang Choi

2014-01-01

Full Text Available A remarkably large number of integral transforms and fractional integral formulas involving various special functions have been investigated by many authors. Very recently, Agarwal gave some integral transforms and fractional integral formulas involving the Fp(α,β(·. In this sequel, using the same technique, we establish certain integral transforms and fractional integral formulas for the generalized Gauss hypergeometric functions Fp(α,β,m(·. Some interesting special cases of our main results are also considered.

Function integrated track system

OpenAIRE

Hohnecker, Eberhard

2010-01-01

The paper discusses a function integrated track system that focuses on the reduction of acoustic emissions from railway lines. It is shown that the combination of an embedded rail system (ERS), a sound absorbing track surface, and an integrated mini sound barrier has significant acoustic advantages compared to a standard ballast superstructure. The acoustic advantages of an embedded rail system are particularly pronounced in the case of railway bridges. Finally, it is shown that a...

User Involvement as a Configurable Integrated Product Delivery

DEFF Research Database (Denmark)

Vibæk, Kasper Sánchez

2009-01-01

as a configurable integrated product delivery then the architect can – using slightly provocatively a term from the production industry – be seen a configuration manager of processes shaping our physical surroundings. Products focusing on standardisation and mass customisation of the building process rather than......Integrated product deliveries as known from the product industry are beginning to emerge in construction. These are normally considered as physical systems that can be configured and customised for a specific delivery to form part of a unique construction project and help to reduce the complexity...... relevant field for development of customisable integrated product deliveries in construction. This development and its causes challenge the traditional role of the architect as the centre point in the creation of physical wholes or entireties. If user involvement, as argued, can be considered...

Structure-function relationships during segregated and integrated network states of human brain functional connectivity.

Science.gov (United States)

Fukushima, Makoto; Betzel, Richard F; He, Ye; van den Heuvel, Martijn P; Zuo, Xi-Nian; Sporns, Olaf

2018-04-01

Structural white matter connections are thought to facilitate integration of neural information across functionally segregated systems. Recent studies have demonstrated that changes in the balance between segregation and integration in brain networks can be tracked by time-resolved functional connectivity derived from resting-state functional magnetic resonance imaging (rs-fMRI) data and that fluctuations between segregated and integrated network states are related to human behavior. However, how these network states relate to structural connectivity is largely unknown. To obtain a better understanding of structural substrates for these network states, we investigated how the relationship between structural connectivity, derived from diffusion tractography, and functional connectivity, as measured by rs-fMRI, changes with fluctuations between segregated and integrated states in the human brain. We found that the similarity of edge weights between structural and functional connectivity was greater in the integrated state, especially at edges connecting the default mode and the dorsal attention networks. We also demonstrated that the similarity of network partitions, evaluated between structural and functional connectivity, increased and the density of direct structural connections within modules in functional networks was elevated during the integrated state. These results suggest that, when functional connectivity exhibited an integrated network topology, structural connectivity and functional connectivity were more closely linked to each other and direct structural connections mediated a larger proportion of neural communication within functional modules. Our findings point out the possibility of significant contributions of structural connections to integrative neural processes underlying human behavior.

Regulated functions and integrability

Directory of Open Access Journals (Sweden)

Ján Gunčaga

2009-04-01

Full Text Available Properties of functions defined on a bounded closed interval, weaker than continuity, have been considered by many mathematicians. Functions having both sides limits at each point are called regulated and were considered by J. Dieudonné [2], D. Fraňková [3] and others (see for example S. Banach [1], S. Saks [8]. The main class of functions we deal with consists of piece-wise constant ones. These functions play a fundamental role in the integration theory which had been developed by Igor Kluvanek (see Š. Tkacik [9]. We present an outline of this theory.

Investigation of thermal integration between biogas production and upgrading

International Nuclear Information System (INIS)

Zhang, Xiaojing; Yan, Jinying; Li, Hailong; Chekani, Shabnam; Liu, Loncheng

2015-01-01

Highlights: • Identify thermal characteristics of amine-based biogas upgrading for waste heat recovery. • Identify thermal characteristics of AD biogas production as sink for heat recovery. • Evaluation of thermal integration between biogas production and upgrading to improve overall energy efficiency. • Cost analysis applied for the economic feasibility of the thermal integration. • Using the principles of target design and system integration for connected thermal processes. - Abstract: Thermal integration of anaerobic digestion (AD) biogas production with amine-based chemical absorption biogas upgrading has been studied to improve the overall efficiency of the intergraded system. The thermal characteristics have been investigated for industrial AD raw biogas production and amine-based chemical absorption biogas upgrading. The investigation provides a basic understanding for the possibilities of energy saving through thermal integration. The thermal integration is carried out through well-defined cases based on the thermal characteristics of the biogas production and the biogas upgrading. The following factors are taken into account in the case study: thermal conditions of sub-systems, material and energy balances, cost issues and main benefits. The potential of heat recovery has been evaluated to utilise the waste heat from amine-based upgrading process for the use in the AD biogas production. The results show that the thermal integration has positive effects on improving the overall energy efficiency of the integrated biogas plant. Cost analysis shows that the thermal integration is economically feasible

The Effect of Headquarter Integration Mechanisms on Subsidiaries’ New Product Success: From Control to Coordination Mechanism

Directory of Open Access Journals (Sweden)

Firmanzah

2007-10-01

Full Text Available New product launching (NPL to the local market by subsidiary managers is a strategic activity, which requires organizational supports from MNC global network. The NPL activity is marked by high level of uncertainty, risk, and market failure. Thus, a headquarter needs to integrate the subsidiary NPL into global strategy. There are two mechanisms to integrate subsidiaries’ activities during NPL process; coordination and control process. By testing the effect of each mechanism on role clarity and functional conflict, I found that coordination mechanism increase role clarity between headquarter and subsidiaries’ managers. In contrast, exercising control mechanism reduces role clarity and functional conflict between headquarter and subsidiaries’ managers during NPL. This research shows that both role clarity and functional conflict increase new product commercial performance introduced by subsidiary in the local market.

What Happens to Integrated Product Development Models with Product/Service-System Approaches?

DEFF Research Database (Denmark)

Tan, Adrian; McAloone, Timothy Charles; Andreasen, Mogens Myrup

2006-01-01

Integrated Product Development (IPD) has traditionally focused on the development activities relating to physical technological artefacts. With the advent of business approaches for manufacturing firms based on providing customers the utility of integrated products and services – a term dubbed...... ‘product/service-systems (PSS)’ – companies need to extend their activities to include new dimensions of development. Within the paradigm of mass production and consumption, traditional product-oriented business strategies regarded physical technological artefacts (products) as the mediators of customer...... value. Value was based on the exchange of products between a providing company and a receiving customer. The more products the company could sell, the more revenue it generated. At the point of sale the ownership and responsibility of the product was transferred from company to customer. A customer...

KLE Translog production function and total factor productivity

Czech Academy of Sciences Publication Activity Database

Klacek, J.; Vošvrda, Miloslav; Schlosser, Š.

2007-01-01

Roč. 87, č. 4 (2007), s. 261-274 ISSN 0322-788X Institutional research plan: CEZ:AV0Z10750506 Keywords : total factor productivity * translog production function * aggregate production function * least squares method * ridge regression Subject RIV: AH - Economics

Integral Facade Construction. Towards a new product architecture for curtain walls

Directory of Open Access Journals (Sweden)

Tillmann Klein

2013-06-01

Full Text Available Curtain wall constructions are one of the most applied facade constructions today. Independently attached to the primary load bearing structure of the building they protect the building’s interior from external climate conditions and allow great design freedom. With continuously rising requirements in terms of energy savings the constructional principle has reached its limits and strategies for improvement are needed. Incrementally evolved over time it is closely related to the architectural design and building processes. Based on literature research and stakeholder interviews the dissertation maps out the traditional and craftsmanship related facade design and construction process currently employed. In a next step, future challenges for facade constructions to cope with a changing market environment are identified. A facade function tree is developed and the theory of product architecture is applied to create a comparative basis for analysing different historical and contemporary facade products and systems. The function tree as well as the analysis clearly show how the fragmented market structures has influenced contemporary facade construction and leads to extremely modular product architectures. Numerous case studies for a new approach are conducted and summarised in several matrices. The case studies show how different modular and integral constructional strategies can respond to the future challenges. The pros and cons of different facade solutions, their potential for innovation and robustness in terms of market conditions are investigated. The dissertation concludes that a greater diversity of fa.ade types with a more integral construction is needed to meet the sometimes conflicting future challenges. If this can be realised, a greater diversity of more integral design and construction processes will evolve simultaneously. The role of the different stakeholders will change and a new way of educating architects or facade specialists

Functional integral approach to classical statistical dynamics

International Nuclear Information System (INIS)

Jensen, R.V.

1980-04-01

A functional integral method is developed for the statistical solution of nonlinear stochastic differential equations which arise in classical dynamics. The functional integral approach provides a very natural and elegant derivation of the statistical dynamical equations that have been derived using the operator formalism of Martin, Siggia, and Rose

Techno-economic analysis of ammonia production via integrated biomass gasification

International Nuclear Information System (INIS)

Andersson, Jim; Lundgren, Joakim

2014-01-01

Highlights: • Techno-economic results regarding biomass-based ammonia production systems. • Integration of an ammonia production process in a pulp and paper mill. • Integrated ammonia production gains higher system efficiency than stand-alone production. • The economics of an integrated production system is improved compared to stand-alone production. - Abstract: Ammonia (NH 3 ) can be produced by synthesis of nitrogen and hydrogen in the Haber–Bosch process, where the economic challenge is the hydrogen production. Currently, substantial amounts of greenhouse gases are emitted from the ammonia industry since the hydrogen production is almost exclusively based on fossil feedstocks. Hydrogen produced via gasification of lignocellulosic biomass is a more environmentally friendly alternative, but the economic performance is critical. The main objective of this work was to perform a techno-economic evaluation of ammonia production via integrated biomass gasification in an existing pulp and paper mill. The results were compared with a stand-alone production case to find potential technical and economic benefits deriving from the integration. The biomass gasifier and the subsequent NH 3 production were modelled using the commercial software Aspen Plus. A process integration model based on Mixed Integer Linear Programming (MILP) was used to analyze the effects on the overall energy system of the pulp mill. Important modelling constraints were to maintain the pulp production and the steam balance of the mill. The results showed that the process economics and energy performance are favourable for the integrated case compared to stand-alone production. The main conclusion was however that a rather high NH 3 selling price is required to make both production cases economically feasible

Poisson processes and a Bessel function integral

NARCIS (Netherlands)

Steutel, F.W.

1985-01-01

The probability of winning a simple game of competing Poisson processes turns out to be equal to the well-known Bessel function integral J(x, y) (cf. Y. L. Luke, Integrals of Bessel Functions, McGraw-Hill, New York, 1962). Several properties of J, some of which seem to be new, follow quite easily

Integration a functional approach

CERN Document Server

Bichteler, Klaus

1998-01-01

This book covers Lebesgue integration and its generalizations from Daniell's point of view, modified by the use of seminorms. Integrating functions rather than measuring sets is posited as the main purpose of measure theory. From this point of view Lebesgue's integral can be had as a rather straightforward, even simplistic, extension of Riemann's integral; and its aims, definitions, and procedures can be motivated at an elementary level. The notion of measurability, for example, is suggested by Littlewood's observations rather than being conveyed authoritatively through definitions of (sigma)-algebras and good-cut-conditions, the latter of which are hard to justify and thus appear mysterious, even nettlesome, to the beginner. The approach taken provides the additional benefit of cutting the labor in half. The use of seminorms, ubiquitous in modern analysis, speeds things up even further. The book is intended for the reader who has some experience with proofs, a beginning graduate student for example. It might...

Pair Correlation Function Integrals

DEFF Research Database (Denmark)

Wedberg, Nils Hejle Rasmus Ingemar; O'Connell, John P.; Peters, Günther H.J.

2011-01-01

We describe a method for extending radial distribution functions obtained from molecular simulations of pure and mixed molecular fluids to arbitrary distances. The method allows total correlation function integrals to be reliably calculated from simulations of relatively small systems. The long......-distance behavior of radial distribution functions is determined by requiring that the corresponding direct correlation functions follow certain approximations at long distances. We have briefly described the method and tested its performance in previous communications [R. Wedberg, J. P. O’Connell, G. H. Peters......, and J. Abildskov, Mol. Simul. 36, 1243 (2010); Fluid Phase Equilib. 302, 32 (2011)], but describe here its theoretical basis more thoroughly and derive long-distance approximations for the direct correlation functions. We describe the numerical implementation of the method in detail, and report...

Integrating ergonomics into production system development--the Volvo Powertrain case.

Science.gov (United States)

Neumann, W Patrick; Ekman, Marianne; Winkel, Jørgen

2009-05-01

Understanding the barriers and assists to integrating ergonomics into production system design remains a research issue. An action research case study at Volvo Powertrain/Sweden was conducted. Researchers worked collaboratively with the firm in efforts to improve the company's ability to handle ergonomics in their daily work of improving and developing production systems. Researchers observed and reflected collectively on the change process using field notes and recordings to support their observations. Observed integration barriers included both individual level issues like life events, and organisational aspects such as communication barriers between groups or assignment of tasks to people not involved in decision-making. Observed assists included the 'political reflective navigation' (c.f. Broberg, O., Hermund, I., 2004. The OHS consultant as a 'political reflective navigator' in technological change processes. International Journal of Industrial Ergonomics 33 (4), 315-326) by the project owner to find new ways to overcome barriers and anchor ergonomics into the organisation. While special 'ergonomics' groups did not survive long, progress was observed in including ergonomics in regular design groups. A cross-functional workshop that fostered discussion across organisational boundaries helped shift focus from retrofitting systems to future production systems and improve engagement of engineering teams. Progress was marked by both success and setbacks and full integration appears to require more than 2 years time. It is concluded that support by senior managers should include succession planning for personnel that are key to the change effort.

Application of fuzzy set theory for integral assessment of agricultural products quality

Science.gov (United States)

Derkanosova, N. M.; Ponomareva, I. N.; Shurshikova, G. V.; Vasilenko, O. A.

2018-05-01

The methodology of integrated assessment of quality and safety of agricultural products, approbated by the example of indicators of wheat grain in relation to the provision of consumer properties of bakery products, was developed. Determination of the level of quality of the raw ingredients will allow direct using of agricultural raw materials for food production, taking into account ongoing technology, types of products, and, respectively, rational use of resource potential of the agricultural sector. The mathematical tool of the proposed method is a fuzzy set theory. The fuzzy classifier to evaluate the properties of the grain is formed. The set of six indicators normalized by the national standard is determined; values are ordered and represented by linguistic variables with a trapeziform membership function; the rules for calculation of membership functions are presented. Specific criteria values for individual indicators in shaping the quality of the finished products are considered. For one of the samples of wheat grain values of membership; functions of the linguistic variable "level" for all indicators and the linguistic variable "level of quality" were calculated. It is established that the studied sample of grain obtains the 2 (average) level of quality. Accordingly, it can be recommended for the production of bakery products with higher requirements for the structural-mechanical properties bakery and puff pastry products hearth bread and flour confectionery products of the group of hard dough cookies and crackers

Integrated production planning and water management in the food industry: A cheese production case study

NARCIS (Netherlands)

Pulluru, Sai Jishna; Akkerman, Renzo; Hottenrott, Andreas

2017-01-01

Efficient water management is increasingly relevant in the food industry. Exploiting water reuse opportunities in planning production activities is a key part of this. We study integrated water management and production planning in cheese production. For this, we develop a water-integrated lot

VEGF production and signaling in Müller glia are critical to modulating vascular function and neuronal integrity in diabetic retinopathy and hypoxic retinal vascular diseases.

Science.gov (United States)

Le, Yun-Zheng

2017-10-01

Müller glia (MG) are major retinal supporting cells that participate in retinal metabolism, function, maintenance, and protection. During the pathogenesis of diabetic retinopathy (DR), a neurovascular disease and a leading cause of blindness, MG modulate vascular function and neuronal integrity by regulating the production of angiogenic and trophic factors. In this article, I will (1) briefly summarize our work on delineating the role and mechanism of MG-modulated vascular function through the production of vascular endothelial growth factor (VEGF) and on investigating VEGF signaling-mediated MG viability and neural protection in diabetic animal models, (2) explore the relationship among VEGF and neurotrophins in protecting Müller cells in in vitro models of diabetes and hypoxia and its potential implication to neuroprotection in DR and hypoxic retinal diseases, and (3) discuss the relevance of our work to the effectiveness and safety of long-term anti-VEGF therapies, a widely used strategy to combat DR, diabetic macular edema, neovascular age-related macular degeneration, retinopathy of prematurity, and other hypoxic retinal vascular disorders. Copyright © 2017 Elsevier Ltd. All rights reserved.

Asset management -- Integrated software optimizes production performance

International Nuclear Information System (INIS)

Polczer, S.

1998-01-01

Developments in data collection and retrieval systems to allow timely cost analysis, financial reporting and production management are discussed. One of the most important new OLAP (on-line analytical processing) products is Energy Warehouse which gathers field information from various sources, allows advanced searches, and generates reports previously unavailable in other conventional financial accounting systems. Another OLAP-based system, the Canadian Upstream Energy System (CUES), was developed by the Oracle Corporation and the Calgary-based Applied Terravision Systems (ATS) Inc. CUES combines Oracle's universal data server software development tools with ATS's upstream financial, land, geotechnical and production applications. ATS also developed a product called IDPMARS (Integrated Daily Production Management Accounting Reporting System). It interfaces with CUES to link working interests, government royalties, administration, facility charges, lifting costs, transportation tooling, and customers by integrating field data collection systems with financial accounting

Asset management -- Integrated software optimizes production performance

Energy Technology Data Exchange (ETDEWEB)

Polczer, S.

1998-10-01

Developments in data collection and retrieval systems to allow timely cost analysis, financial reporting and production management are discussed. One of the most important new OLAP (on-line analytical processing) products is Energy Warehouse which gathers field information from various sources, allows advanced searches, and generates reports previously unavailable in other conventional financial accounting systems. Another OLAP-based system, the Canadian Upstream Energy System (CUES), was developed by the Oracle Corporation and the Calgary-based Applied Terravision Systems (ATS) Inc. CUES combines Oracle`s universal data server software development tools with ATS`s upstream financial, land, geotechnical and production applications. ATS also developed a product called IDPMARS (Integrated Daily Production Management Accounting Reporting System). It interfaces with CUES to link working interests, government royalties, administration, facility charges, lifting costs, transportation tooling, and customers by integrating field data collection systems with financial accounting.

International Product Market Integration, Rents and Wage Formation

DEFF Research Database (Denmark)

Sørensen, Allan

including product market rents and the possibility that jobs may be relocated across national labour markets. Possibilities and threats, however, will not in general be uniformly distributed across firms and therefore groups in the labour market. These issues are explored in a Ricardian trade model......International product market integration enhances both export possibilities through easier access to foreign markets, but also the import threat arising from foreign firms penetrating into the domestic market. These mechanisms affect wage formation and employment creation through many channels...... with imperfect competition, heterogeneity in the labour market, and decentralized wage-bargaining. The Paper analyses how product market integration affects wage formation, and identifies characteristics of winners and losers in the integration process....

Conditions and strategies for integrating ergonomics into product development

DEFF Research Database (Denmark)

Broberg, Ole

1996-01-01

Ergonomics considerations at the stage of product development in industry is a major strategy for prevention of work-related injuries and illnesses among employees at the time of manufacture of new products. This study elucidates some important conditions and possibilities for integrating...... such considerations during the product development process. Special attention is paid to the role of design and production engineers. Based on different understandings of the product development process four approaches to integration of ergonomics are outlined....

Dynamic optimization approach for integrated supplier selection and tracking control of single product inventory system with product discount

Science.gov (United States)

Sutrisno; Widowati; Heru Tjahjana, R.

2017-01-01

In this paper, we propose a mathematical model in the form of dynamic/multi-stage optimization to solve an integrated supplier selection problem and tracking control problem of single product inventory system with product discount. The product discount will be stated as a piece-wise linear function. We use dynamic programming to solve this proposed optimization to determine the optimal supplier and the optimal product volume that will be purchased from the optimal supplier for each time period so that the inventory level tracks a reference trajectory given by decision maker with minimal total cost. We give a numerical experiment to evaluate the proposed model. From the result, the optimal supplier was determined for each time period and the inventory level follows the given reference well.

Functional representations of integrable hierarchies

International Nuclear Information System (INIS)

Dimakis, Aristophanes; Mueller-Hoissen, Folkert

2006-01-01

We consider a general framework for integrable hierarchies in Lax form and derive certain universal equations from which 'functional representations' of particular hierarchies (such as KP, discrete KP, mKP, AKNS), i.e. formulations in terms of functional equations, are systematically and quite easily obtained. The formalism genuinely applies to hierarchies where the dependent variables live in a noncommutative (typically matrix) algebra. The obtained functional representations can be understood as 'noncommutative' analogues of 'Fay identities' for the KP hierarchy

Developing engineering processes through integrated modelling of product and process

DEFF Research Database (Denmark)

Nielsen, Jeppe Bjerrum; Hvam, Lars

2012-01-01

This article aims at developing an operational tool for integrated modelling of product assortments and engineering processes in companies making customer specific products. Integrating a product model in the design of engineering processes will provide a deeper understanding of the engineering...... activities as well as insight into how product features affect the engineering processes. The article suggests possible ways of integrating models of products with models of engineering processes. The models have been tested and further developed in an action research study carried out in collaboration...... with a major international engineering company....

Electricity economics. Production functions with electricity

Energy Technology Data Exchange (ETDEWEB)

Hu, Zhaoguang [State Grid Energy Research Institute, Beijing (China); Hu, Zheng [Delaware Univ., Newark, DE (United States)

2013-07-01

The first book studies on the economics of electricity consumption. Compares the sector production functions with electricity and the commercial production functions with electricity. Introduces the global E-GDP function, the European E-GDP function and 12 national E-GDP functions. Presents the gene characters of EAI production functions and E-GDP functions for USA to see why USA's economy is entering an up-industrialization period. Discusses China's economic growth by production functions with electricity. Electricity Economics: Production Functions with Electricity studies the production output from analyzing patterns of electricity consumption. Since electricity data can be used to measure scenarios of economic performance due to its accuracy and reliability, it could therefore also be used to help scholars explore new research frontiers that directly and indirectly benefits human society. Our research initially explores a similar pattern to substitute the Cobb-Douglas function with the production function with electricity to track and forecast economic activities. The book systematically introduces the theoretical frameworks and mathematical models of economics from the perspective of electricity consumption. The E-GDP functions are presented for case studies of more than 20 developed and developing countries. These functions also demonstrate substantial similarities between human DNA and production functions with electricity in terms of four major characteristics, namely replication, mutation, uniqueness, and evolution. Furthermore, the book includes extensive data and case studies on the U.S., China, Japan, etc. It is intended for scientists, engineers, financial professionals, policy makers, consultants, and anyone else with a desire to study electricity economics as well as related applications.

Electricity economics. Production functions with electricity

International Nuclear Information System (INIS)

Hu, Zhaoguang; Hu, Zheng

2013-01-01

The first book studies on the economics of electricity consumption. Compares the sector production functions with electricity and the commercial production functions with electricity. Introduces the global E-GDP function, the European E-GDP function and 12 national E-GDP functions. Presents the gene characters of EAI production functions and E-GDP functions for USA to see why USA's economy is entering an up-industrialization period. Discusses China's economic growth by production functions with electricity. Electricity Economics: Production Functions with Electricity studies the production output from analyzing patterns of electricity consumption. Since electricity data can be used to measure scenarios of economic performance due to its accuracy and reliability, it could therefore also be used to help scholars explore new research frontiers that directly and indirectly benefits human society. Our research initially explores a similar pattern to substitute the Cobb-Douglas function with the production function with electricity to track and forecast economic activities. The book systematically introduces the theoretical frameworks and mathematical models of economics from the perspective of electricity consumption. The E-GDP functions are presented for case studies of more than 20 developed and developing countries. These functions also demonstrate substantial similarities between human DNA and production functions with electricity in terms of four major characteristics, namely replication, mutation, uniqueness, and evolution. Furthermore, the book includes extensive data and case studies on the U.S., China, Japan, etc. It is intended for scientists, engineers, financial professionals, policy makers, consultants, and anyone else with a desire to study electricity economics as well as related applications.

Table of integrals, series, and products

CERN Document Server

Gradshteyn, I S; Zwillinger, Daniel; Moll, Victor

2015-01-01

The eighth edition of the classic Gradshteyn and Ryzhik is an updated completely revised edition of what is acknowledged universally by mathematical and applied science users as the key reference work concerning the integrals and special functions. The book is valued by users of previous editions of the work both for its comprehensive coverage of integrals and special functions, and also for its accuracy and valuable updates. Since the first edition, published in 1965, the mathematical content of this book has significantly increased due to the addition of new material, though the size of the book has remained almost unchanged. The new 8th edition contains entirely new results and amendments to the auxiliary conditions that accompany integrals and wherever possible most entries contain valuable references to their source.

Macro-level integrated renewable energy production schemes for sustainable development

International Nuclear Information System (INIS)

Subhadra, Bobban G.

2011-01-01

The production of renewable clean energy is a prime necessity for the sustainable future existence of our planet. However, because of the resource-intensive nature, and other challenges associated with these new generation renewable energy sources, novel industrial frameworks need to be co-developed. Integrated renewable energy production schemes with foundations on resource sharing, carbon neutrality, energy-efficient design, source reduction, green processing plan, anthropogenic use of waste resources for the production green energy along with the production of raw material for allied food and chemical industries is imperative for the sustainable development of this sector especially in an emission-constrained future industrial scenario. To attain these objectives, the scope of hybrid renewable production systems and integrated renewable energy industrial ecology is briefly described. Further, the principles of Integrated Renewable Energy Park (IREP) approach, an example for macro-level energy production, and its benefits and global applications are also explored. - Research highlights: → Discusses the need for macro-level renewable energy production schemes. → Scope of hybrid and integrated industrial ecology for renewable energy production. → Integrated Renewable Energy Parks (IREPs): A macro-level energy production scheme. → Discusses the principle foundations and global applications of IREPs. → Describes the significance of IREPs in the carbon-neutral future business arena.

Improving functional value of meat products.

Science.gov (United States)

Zhang, Wangang; Xiao, Shan; Samaraweera, Himali; Lee, Eun Joo; Ahn, Dong U

2010-09-01

In recent years, much attention has been paid to develop meat and meat products with physiological functions to promote health conditions and prevent the risk of diseases. This review focuses on strategies to improve the functional value of meat and meat products. Value improvement can be realized by adding functional compounds including conjugated linoneleic acid, vitamin E, n3 fatty acids and selenium in animal diets to improve animal production, carcass composition and fresh meat quality. In addition, functional ingredients such as vegetable proteins, dietary fibers, herbs and spices, and lactic acid bacteria can be directly incorporated into meat products during processing to improve their functional value for consumers. Functional compounds, especially peptides, can also be generated from meat and meat products during processing such as fermentation, curing and aging, and enzymatic hydrolysis. This review further discusses the current status, consumer acceptance, and market for functional foods from the global viewpoints. Future prospects for functional meat and meat products are also discussed.

An Integrated Methodology for Emulsified Formulated Product Design

DEFF Research Database (Denmark)

Mattei, Michele

are mixed together to determine the desired emulsified product. They are still mainly designed and analysed through trial - and - error based exper- imental techniques, therefore a systematic approach , integrating model-based as well a s experiment - based techniques, for design of these products could......The consumer oriented chemical based products are used every day by millions of people. They are structured products constituted of numerous chemicals, and many of them, especially household and personal care products, are emulsions where active ingredients, solvents, additives and surfactants...... significantly reduce both time and cost connected to product development by doing only the necessary experi- ments , and ensuring chances for innovation . The main contribution of this project i s the development of an integrated methodology for the design of emulsified formulated products. The methodology...

Life-cycle analysis of product integrated polymer solar cells

DEFF Research Database (Denmark)

Espinosa Martinez, Nieves; García-Valverde, Rafael; Krebs, Frederik C

2011-01-01

A life cycle analysis (LCA) on a product integrated polymer solar module is carried out in this study. These assessments are well-known to be useful in developmental stages of a product in order to identify the bottlenecks for the up-scaling in its production phase for several aspects spanning from...... economics through design to functionality. An LCA study was performed to quantify the energy use and greenhouse gas (GHG) emissions from electricity use in the manufacture of a light-weight lamp based on a plastic foil, a lithium-polymer battery, a polymer solar cell, printed circuitry, blocking diode......, switch and a white light emitting semiconductor diode. The polymer solar cell employed in this prototype presents a power conversion efficiency in the range of 2 to 3% yielding energy payback times (EPBT) in the range of 1.3–2 years. Based on this it is worthwhile to undertake a life-cycle study...

High Throughput Integrated Technologies for Multimaterial Functional Micro Components (EU FP7 HINMICO 2013-2016)

DEFF Research Database (Denmark)

Azcarate, Sabino; Esmoris, Joseba; Dimov, Stefan

2016-01-01

The objective of the HINMICO project is the development and optimization of manufacturing processes for the production of high-added value high quality multi-material micro-components, with the possibility of additional, functionalities, through more integrated, efficient and cost-effective proce...

Construction of functional linkage gene networks by data integration.

Science.gov (United States)

Linghu, Bolan; Franzosa, Eric A; Xia, Yu

2013-01-01

Networks of functional associations between genes have recently been successfully used for gene function and disease-related research. A typical approach for constructing such functional linkage gene networks (FLNs) is based on the integration of diverse high-throughput functional genomics datasets. Data integration is a nontrivial task due to the heterogeneous nature of the different data sources and their variable accuracy and completeness. The presence of correlations between data sources also adds another layer of complexity to the integration process. In this chapter we discuss an approach for constructing a human FLN from data integration and a subsequent application of the FLN to novel disease gene discovery. Similar approaches can be applied to nonhuman species and other discovery tasks.

Towards Integrated Product and Package Development

OpenAIRE

Bramklev, Caroline

2007-01-01

The global company operates from a number of locations worldwide, resulting in implications for the transport, handling and storage of product and parts transported within the company as well as between the company divisions and suppliers and/or consumers. In these companies, the package becomes a frequently used object to complement product features and achieve an effective and efficient means of logistics. In this context, it is interesting to integrate package development in the product...

Integrated product development: Competencies meet and products arise

DEFF Research Database (Denmark)

Jensen, Birger Boutrup; Stacey, Julia

2000-01-01

and process competencies throughout the whole development process. Of course, this is easier said than done but integrating various competencies into the product development prepares the ground for a better balance and consequently more products. Databases, for instance are a good example of a tool that can...... the development process and diminish the risk of inventing sliced bread once again. Furthermore the databases may be used as a foundation for a more effective and frictionless communication across departments. The project has its starting point in case studies of three Danish food companies. A research group...

Integrated durability process in product development

International Nuclear Information System (INIS)

Pompetzki, M.; Saadetian, H.

2002-01-01

This presentation describes the integrated durability process in product development. Each of the major components of the integrated process are described along with a number of examples of how integrated durability assessment has been used in the ground vehicle industry. The durability process starts with the acquisition of loading information, either physically through loads measurement or virtually through multibody dynamics. The loading information is then processed and characterized for further analysis. Durability assessment was historically test based and completed through field or laboratory evaluation. Today, it is common that both the test and CAE environments are used together in durability assessment. Test based durability assessment is used for final design sign-off but is also critically important for correlating CAE models, in order to investigate design alternatives. There is also a major initiative today to integrate the individual components into a process, by linking applications and providing a framework to communicate information as well as manage all the data involved in the entire process. Although a single process is presented, the details of the process can vary significantly for different products and applications. Recent applications that highlight different parts of the durability process are given. As well as an example of how integration of software tools between different disciplines (MBD, FE and fatigue) not only simplifies the process, but also significantly improves it. (author)

Product market integration, rents and wage inequality

DEFF Research Database (Denmark)

Andersen, Torben M.; Sørensen, Allan

"protection" and "specialization" rents. In particular, wage inequality among similar workers (residual wage inequality) may be U-shaped, at first decreasing and then increasing in the process of product market integration. Consequently, there may be gains in both the efficiency and the equity dimension until......Globalization in the form of product market integration affects labour markets and produces winners and losers. While there are aggregate gains, it is in general ambiguous how inequality is affected. We explore this issue in a Ricardian model and show that it depends on the balance between...

ZEROES OF GENERALIZED FRESNEL COMPLEMENTARY INTEGRAL FUNCTIONS

Directory of Open Access Journals (Sweden)

Jaime Lobo Segura

2016-08-01

Full Text Available Theoretical upper and lower bounds are established for zeroes of a parametric family of functions which are defined by integrals of the same type as the Fresnel complementary integral. Asymptotic properties for these bounds are obtained as well as monotony properties of the localization intervals. Given the value of the parameter an analytical-numerical procedure is deduced to enclose all zeros of a given function with an a priori error.

Restoring a smooth function from its noisy integrals

Science.gov (United States)

Goulko, Olga; Prokof'ev, Nikolay; Svistunov, Boris

2018-05-01

Numerical (and experimental) data analysis often requires the restoration of a smooth function from a set of sampled integrals over finite bins. We present the bin hierarchy method that efficiently computes the maximally smooth function from the sampled integrals using essentially all the information contained in the data. We perform extensive tests with different classes of functions and levels of data quality, including Monte Carlo data suffering from a severe sign problem and physical data for the Green's function of the Fröhlich polaron.

IRREVERSIBILITY GENERATION IN SUGAR, ALCOHOL AND BIOGAS INTEGRATED PRODUCTIONS

OpenAIRE

Meilyn González Cortés; Yenisleidy Martínez Martínez; Yailet Albernas Carvajal; Raúl A. Pérez Bermúdez

2017-01-01

In this work, the stages of losses and lower exergetic efficiency are determined when the sugar production process is integrated with others for the production of products such as biogas, torula yeast and electricity. The study is carried out in three scenarios of integrated processes for obtaining the indicated products. A sugar factory in which sugar and electricity are produced is considered as the base scenario and from this; a second scenario is inferred in which alcohol is produced from...

Product market integration, tax distortions and public sector size

DEFF Research Database (Denmark)

Andersen, Torben M.; Sørensen, Allan

of product market integration for the public sector are far from straightforward. The reason is gains-from-trade effects which tend to increase the tax base and decrease the opportunity costs of public consumption (marginal utility of private consumption falls). It follows that the retrenchment view...... that product market integration inevitable leads to a downward pressure on public sector activities does not get support in a standard setting. A particularly noteworthy finding is that a country with a large public sector (strong preferences for public consumption) may benefit more by integrating......The implications of product market integration for public sector activities (transfers and public consumption) are considered in a standard setting. The analysis supports that a larger public sector (higher tax rate) tends to increase wages and worsen wage competitiveness. However, the implications...

Fragmentation function in non-equilibrium QCD using closed-time path integral formalism

International Nuclear Information System (INIS)

Nayak, Gouranga C.

2009-01-01

In this paper we implement the Schwinger-Keldysh closed-time path integral formalism in non-equilibrium QCD in accordance to the definition of the Collins-Soper fragmentation function. We consider a high-p T parton in QCD medium at initial time τ 0 with an arbitrary non-equilibrium (non-isotropic) distribution function f(vector (p)) fragmenting to a hadron. We formulate the parton-to-hadron fragmentation function in non-equilibrium QCD in the light-cone quantization formalism. It may be possible to include final-state interactions with the medium via a modification of the Wilson lines in this definition of the non-equilibrium fragmentation function. This may be relevant to the study of hadron production from a quark-gluon plasma at RHIC and LHC. (orig.)

Integrating individual movement behaviour into dispersal functions.

Science.gov (United States)

Heinz, Simone K; Wissel, Christian; Conradt, Larissa; Frank, Karin

2007-04-21

Dispersal functions are an important tool for integrating dispersal into complex models of population and metapopulation dynamics. Most approaches in the literature are very simple, with the dispersal functions containing only one or two parameters which summarise all the effects of movement behaviour as for example different movement patterns or different perceptual abilities. The summarising nature of these parameters makes assessing the effect of one particular behavioural aspect difficult. We present a way of integrating movement behavioural parameters into a particular dispersal function in a simple way. Using a spatial individual-based simulation model for simulating different movement behaviours, we derive fitting functions for the functional relationship between the parameters of the dispersal function and several details of movement behaviour. This is done for three different movement patterns (loops, Archimedean spirals, random walk). Additionally, we provide measures which characterise the shape of the dispersal function and are interpretable in terms of landscape connectivity. This allows an ecological interpretation of the relationships found.

Eradication of Productivity Related Problems Through Lean Principles In Integrated Manufacturing Environment

Directory of Open Access Journals (Sweden)

Rahul

2013-06-01

Full Text Available In this competitive era, manufacturing enterprises struggle to adopt cost-effective manufacturing systems. Overview of the recent manufacturing enterprises shows that successful global manufacturing enterprises have distributed their manufacturing capabilities over the globe. The successes of distributed integrated manufacturing enterprises depend upon the adaptation of appropriate manufacturing technologies like computer integrated manufacturing (CIM under the global collaborative environment along with the principles of lean manufacturing so that their corporate goals are achieved. CIM is an umbrella term which involves automated design, analysis, planning manufacturing, dispatching, customer-interaction, purchasing, cost accounting, inventory control and factory floor functions, which are inter-linked through the computer, to control all the campus-wide manufacturing related operations. It helps to improve the performance of a firm by integrating various areas of manufacturing business in which most of lean ideas are embedded. These lean ideas cause work in a process to be performed with minimum of non-value adding activities and focus on customers’ needs by delivering them at minimum time, with high quality and at minimum cost by eliminating hidden waste. What happens at the shop floor of even an integrated industry is that proper and timely attention is not paid to the intangible lean principles in the manual part of the CIM system which results in substantial loss of the plant productivity. Therefore the objective of this research paper is to investigate the different poor productivity-related problems in a partially integrated manufacturing environment and lay down the remedial measures to eradicate them using ‘Juran’s problem solving techniques’ and various ‘lean tools’ which results in the reduced wastages and hence improved productivity.

Hypergeometric Functions with Integral Parameter Differences

DEFF Research Database (Denmark)

Karlsson, Per W.

1971-01-01

For a generalized hypergeometric function pFq(z) with positive integral differences between certain numerator and denominator parameters, a formula expressing the pFq(z) as a finite sum of lower-order functions is proved. From this formula, Minton's two summation theorems for p = q + 1, z = 1...

Integrative Production Technology for High-Wage Countries

CERN Document Server

2012-01-01

Industrial production in high-wage countries like Germany is still at risk. Yet, there are many counter-examples in which producing companies dominate their competitors by not only compensating for their specific disadvantages in terms of factor costs (e.g. wages, energy, duties and taxes) but rather by minimising waste using synchronising integrativity as well as by obtaining superior adaptivity on alternating conditions. In order to respond to the issue of economic sustainability of industrial production in high-wage countries, the leading production engineering and material research scientists of RWTH Aachen University together with renowned companies have established the Cluster of Excellence “Integrative Production Technology for High-Wage Countries”. This compendium comprises the cluster’s scientific results as well as a selection of business and technology cases, in which these results have been successfully implemented into industrial practice in close cooperation with more than 30 companies of ...

Product Market Integration, Comparative Advantages and Labour Market Performance

DEFF Research Database (Denmark)

Andersen, Torben M.; Rose Skaksen, Jan

2003-01-01

Product Market Integration, Comparative Advantages andLabour Market Performance@*In a two-country model with trade driven by comparative advantages, it is considered howimperfectly competitive labour markets are affected by lower frictions in international goodstrade. Easier goods trading...... is equivalent to increased mobility of employment acrosscountries and thus a change in the trade-off between wages and employment faced by wagesetters. While the effects of product market integration on the trade-off between wages andemployment in general is ambiguous, it is shown that product market...... integration works like ageneral improvement in productivity via the specialization it allows through trade.Unambiguously, real wages and employment and welfare improve upon reductions in tradefrictions, and therefore workers are better off irrespective of whether the market power ofunions is enhanced or muted...

Exact series expansions, recurrence relations, properties and integrals of the generalized exponential integral functions

International Nuclear Information System (INIS)

Altac, Zekeriya

2007-01-01

Generalized exponential integral functions (GEIF) are encountered in multi-dimensional thermal radiative transfer problems in the integral equation kernels. Several series expansions for the first-order generalized exponential integral function, along with a series expansion for the general nth order GEIF, are derived. The convergence issues of these series expansions are investigated numerically as well as theoretically, and a recurrence relation which does not require derivatives of the GEIF is developed. The exact series expansions of the two dimensional cylindrical and/or two-dimensional planar integral kernels as well as their spatial moments have been explicitly derived and compared with numerical values

Designing Integrated Product- Service System Solutions in Manufacturing Industries

DEFF Research Database (Denmark)

Costa, Nina; Patrício, Lia; Morelli, Nicola

2015-01-01

Manufacturing firms are increasingly evolving towards the design of integrated product-service solutions but servitization literature does not provide specific guidance on how to design these integrated solutions. Building upon ProductService System (PSS) and Service Design (SD) approaches...... how it brings new insights to manufacturing companies moving to a service, value cocreation perspective....

INTEGRATED METHODOLOGY FOR PRODUCT PLANNING USING MULTI CRITERIA ANALYSIS

Directory of Open Access Journals (Sweden)

Tarun Soota

2016-09-01

Full Text Available Integrated approach to multi-criteria decision problems is proposed using quality function deployment and analytical network process. The objective of the work is to rationalize and improve the method of analyzing and interpreting customer needs and technical requirements. The methodology is used to determine, prioritize engineering requirements based on customer needs for development of best product. Framework allows decision maker to decompose a complex problem in a hierarchical structure to show relationship between objective and criteria. Multi-criteria decision modeling is used for extending the hierarchy process to both dependence and feedback. A case study on bikes is presented for the proposed model.

Technology Epiphany and an Integrated Product and Service

Directory of Open Access Journals (Sweden)

Satoru Goto

2017-07-01

Full Text Available This study aims at exploring how an integrated product and service contributes to achieving Innovation of Meaning (IoM or technology epiphany. Existing IoM studies have focused on intended meaning (as defined in new product development and ignored the received meaning that users reconstruct. The process by which a user assigns meaning to things can not only be static but also dynamic. This study focuses on integrated products and contexts offered by services and analyses the case of Japan’s largest manufacturer of ankle-foot orthoses. The results show that the service guides the users to reconstruct the meaning in dynamic cognitive processes and use the metaphors that contribute to the consistency between products and services.

Soil Functional Zone Management: A Vehicle for Enhancing Production and Soil Ecosystem Services in Row-Crop Agroecosystems.

Science.gov (United States)

Williams, Alwyn; Kane, Daniel A; Ewing, Patrick M; Atwood, Lesley W; Jilling, Andrea; Li, Meng; Lou, Yi; Davis, Adam S; Grandy, A Stuart; Huerd, Sheri C; Hunter, Mitchell C; Koide, Roger T; Mortensen, David A; Smith, Richard G; Snapp, Sieglinde S; Spokas, Kurt A; Yannarell, Anthony C; Jordan, Nicholas R

2016-01-01

There is increasing global demand for food, bioenergy feedstocks and a wide variety of bio-based products. In response, agriculture has advanced production, but is increasingly depleting soil regulating and supporting ecosystem services. New production systems have emerged, such as no-tillage, that can enhance soil services but may limit yields. Moving forward, agricultural systems must reduce trade-offs between production and soil services. Soil functional zone management (SFZM) is a novel strategy for developing sustainable production systems that attempts to integrate the benefits of conventional, intensive agriculture, and no-tillage. SFZM creates distinct functional zones within crop row and inter-row spaces. By incorporating decimeter-scale spatial and temporal heterogeneity, SFZM attempts to foster greater soil biodiversity and integrate complementary soil processes at the sub-field level. Such integration maximizes soil services by creating zones of 'active turnover', optimized for crop growth and yield (provisioning services); and adjacent zones of 'soil building', that promote soil structure development, carbon storage, and moisture regulation (regulating and supporting services). These zones allow SFZM to secure existing agricultural productivity while avoiding or minimizing trade-offs with soil ecosystem services. Moreover, the specific properties of SFZM may enable sustainable increases in provisioning services via temporal intensification (expanding the portion of the year during which harvestable crops are grown). We present a conceptual model of 'virtuous cycles', illustrating how increases in crop yields within SFZM systems could create self-reinforcing feedback processes with desirable effects, including mitigation of trade-offs between yield maximization and soil ecosystem services. Through the creation of functionally distinct but interacting zones, SFZM may provide a vehicle for optimizing the delivery of multiple goods and services in

Soil functional zone management: a vehicle for enhancing production and soil ecosystem services in row-crop agroecosystems

Directory of Open Access Journals (Sweden)

Alwyn eWilliams

2016-02-01

Full Text Available There is increasing global demand for food, bioenergy feedstocks and a wide variety of bio-based products. In response, agriculture has advanced production, but is increasingly depleting soil regulating and supporting ecosystem services. New production systems have emerged, such as no-tillage, that can enhance soil services but may limit yields. Moving forward, agricultural systems must reduce trade-offs between production and soil services. Soil functional zone management (SFZM is a novel strategy for developing sustainable production systems that attempts to integrate the benefits of conventional, intensive agriculture and no-tillage. SFZM creates distinct functional zones within crop row and inter-row spaces. By incorporating decimetre-scale spatial and temporal heterogeneity, SFZM attempts to foster greater soil biodiversity and integrate complementary soil processes at the sub-field level. Such integration maximizes soil services by creating zones of ‘active turnover’, optimized for crop growth and yield (provisioning services; and adjacent zones of ‘soil building’, that promote soil structure development, carbon storage and moisture regulation (regulating and supporting services. These zones allow SFZM to secure existing agricultural productivity while avoiding or minimizing trade-offs with soil ecosystem services. Moreover, the specific properties of SFZM may enable sustainable increases in provisioning services via temporal intensification (expanding the portion of the year during which harvestable crops are grown. We present a conceptual model of ‘virtuous cycles’, illustrating how increases in crop yields within SFZM systems could create self-reinforcing feedback processes with desirable effects, including mitigation of trade-offs between yield maximization and soil ecosystem services. Through the creation of functionally distinct but interacting zones, SFZM may provide a vehicle for optimizing the delivery of multiple

On the logistics effects of integrated product and package design

DEFF Research Database (Denmark)

Bramklev, Caroline; Hansen, Claus Thorp

2007-01-01

obtaining error-free deliveries, saving costs and avoiding quality problems. Thus, the authors of this paper see a challenge in developing the theory and methodology for Integrated Product and Package Design. In this paper we take a first step in this direction. Firstly, we have carried out a broad review...... of literature, which shows that there is a need for research into Integrated Product and Package Design. Secondly, we have analysed three cases from industrial practice, which show that a conscious and integrated design of product and package has positive logistics effects, whereas neglecting this issue might...... result in higher costs and quality problems. On the basis of these cases we have made an initial cross-case analysis, which indicates that it is possible to develop the terminology and methodology for Integrated Product and Package Design....

Mosco convergence of integral functionals and its applications

International Nuclear Information System (INIS)

Tolstonogov, Aleksandr A

2009-01-01

Questions relating to the Mosco convergence of integral functionals defined on the space of square integrable functions taking values in a Hilbert space are investigated. The integrands of these functionals are time-dependent proper, convex, lower semicontinuous functions on the Hilbert space. The results obtained are applied to the analysis of the dependence on the parameter of solutions of evolution equations involving time-dependent subdifferential operators. For example a parabolic inclusion is considered, where the right-hand side contains a sum of the p-Laplacian and the subdifferential of the indicator function of a time-dependent closed convex set. The convergence as p→+∞ of solutions of this inclusion is investigated. Bibliography: 20 titles.

Self-adaptive numerical integrator for analytic functions

International Nuclear Information System (INIS)

Garribba, S.; Quartapelle, L.; Reina, G.

1978-01-01

A new adaptive algorithm for the integration of analytical functions is presented. The algorithm processes the integration interval by generating local subintervals whose length is controlled through a feedback loop. The control is obtained by means of a relation derived on an analytical basis and valid for an arbitrary integration rule: two different estimates of an integral are used to compute the interval length necessary to obtain an integral estimate with accuracy within the assigned error bounds. The implied method for local generation of subintervals and an effective assumption of error partition among subintervals give rise to an adaptive algorithm provided with a highly accurate and very efficient integration procedure. The particular algorithm obtained by choosing the 6-point Gauss-Legendre integration rule is considered and extensive comparisons are made with other outstanding integration algorithms

δ'-function perturbations and Neumann boundary-conditions by path integration

International Nuclear Information System (INIS)

Grosche, C.

1994-02-01

δ'-function perturbations and Neumann boundary conditions are incorporated into the path integral formalism. The starting point is the consideration of the path integral representation for the one dimensional Dirac particle together with a relativistic point interaction. The non-relativistic limit yields either a usual δ-function or a δ'-function perturbation; making their strengths infinitely repulsive one obtains Dirichlet, respectively Neumann boundary conditions in the path integral. (orig.)

An integrated production, inventory and preventive maintenance model for a multi-product production system

International Nuclear Information System (INIS)

Liu, Xuejuan; Wang, Wenbin; Peng, Rui

2015-01-01

This paper considers a production system that can produce multiple products alternately. Products go through the system in a sequence and a complete run of all products forms a production cycle. An integrated production, inventory and preventive maintenance model is constructed, which is characterized by the delay-time concept. Two different situations are studied based on whether the unqualified products and downtime caused by the failures of the system, set-up and preventive maintenance can be ignored or not. Three cases are considered for each situation, depending on the position of the preventive maintenance epochs: the first case, where preventive maintenance is carried out at the end of each production cycle; the second case, where preventive maintenance is carried out at each set-up time of the products; and the third case, where preventive maintenance is carried out at some set-up times only, since it may not always be optimal to carry out preventive maintenance at the end of the production cycle or at each set-up time. The modeling objectives are to find the optimal number of production cycles per year and the optimal position of preventive maintenance that will maximize the expected profit per unit time. Numerical examples, using real data, are presented to illustrate the model. - Highlights: • We propose an integrated economic production quantity and preventive maintenance model. • The situation that multiple products are produced on the same system alternately is studied. • Two situations are studied based on whether the downtime and the product quality can be ignored or not. • We use enumeration method and analytical method to select the optimal preventive maintenance policy, respectively. • We use the delay-time concept to model the preventive maintenance policy

An integrated prediction and optimization model of biogas production system at a wastewater treatment facility.

Science.gov (United States)

Akbaş, Halil; Bilgen, Bilge; Turhan, Aykut Melih

2015-11-01

This study proposes an integrated prediction and optimization model by using multi-layer perceptron neural network and particle swarm optimization techniques. Three different objective functions are formulated. The first one is the maximization of methane percentage with single output. The second one is the maximization of biogas production with single output. The last one is the maximization of biogas quality and biogas production with two outputs. Methane percentage, carbon dioxide percentage, and other contents' percentage are used as the biogas quality criteria. Based on the formulated models and data from a wastewater treatment facility, optimal values of input variables and their corresponding maximum output values are found out for each model. It is expected that the application of the integrated prediction and optimization models increases the biogas production and biogas quality, and contributes to the quantity of electricity production at the wastewater treatment facility. Copyright © 2015 Elsevier Ltd. All rights reserved.

FINANCIAL-ECONOMIC INTEGRATION AS A TOOL FOR INCREASE OF INVESTMENT SUPPORT OF AGRO-INDUSTRIAL PRODUCTION

Directory of Open Access Journals (Sweden)

E. R. Zakirova

2017-01-01

Full Text Available The article reveals the essence and systematizes the advantages of financial and economic integration. In the agro-industrial complex, this kind of integration contributes to attracting investments and reducing risks for investors, increasing the competitiveness and economic growth of the region. The relevance of the study is due to insufficiently researched remains many aspects of the functioning of integrated business systems in relation to individual industries, in particular, to agroindustrial production. The aim of the article is to study theoretical approaches to the essence of financial and economic integration in agro-industrial production and analyze the mechanism of investment support for the Russian agrarian sector, taking into account financial and economic integration. In preparing the article, general scientific methods of research were used: analysis and synthesis, generalization, comparison, classification. Results. The interpretation of financial and economic integration in Russian and foreign scientific publications is generalized. Distinctions of financial and economic integration are distinguished from other economic processes. The advantages of financial and economic integration for the economy and business entities are systematized. The importance of integrating industries and business entities in the agro-industrial complex, which is of strategic importance for ensuring Russia's food security, was noted. The branch structure of the agro-industrial complex is analyzed. The scheme of the integrated financial and economic mechanism in the agroindustrial complex is described. The importance of an optimal balance between cooperation and integration was underscored. The insufficiency of the methodological level of studies of agro-industrial integration is grounded. The components of the effect of financial and economic integration are considered. Positive effects of integration processes in the agroindustrial complex are

Lectures on functional analysis and the Lebesgue integral

CERN Document Server

Komornik, Vilmos

2016-01-01

This textbook, based on three series of lectures held by the author at the University of Strasbourg, presents functional analysis in a non-traditional way by generalizing elementary theorems of plane geometry to spaces of arbitrary dimension. This approach leads naturally to the basic notions and theorems. Most results are illustrated by the small ℓp spaces. The Lebesgue integral, meanwhile, is treated via the direct approach of Frigyes Riesz, whose constructive definition of measurable functions leads to optimal, clear-cut versions of the classical theorems of Fubini-Tonelli and Radon-Nikodým. Lectures on Functional Analysis and the Lebesgue Integral presents the most important topics for students, with short, elegant proofs. The exposition style follows the Hungarian mathematical tradition of Paul Erdős and others. The order of the first two parts, functional analysis and the Lebesgue integral, may be reversed. In the third and final part they are combined to study various spaces of continuous and integ...

The theory of inventive problem solving integrated to the cleaner production: theoretical approach

Directory of Open Access Journals (Sweden)

Flávio Issao Kubota

2013-03-01

Full Text Available Efforts towards to reduction of environmental impact by enterprises are a solving problem process, which often need inventive solutions that generate environmental, technical and economic benefits. Hence, this research aimed to verify, through literature, and discuss the Theory of Inventive Problem Solving (TRIZ integration to cleaner production (CP strategies, in order to structure a new methodology for inventive solutions focused on reduction of effluents, waste and emissions. To perform this study, we proceeded a qualitative and descriptive research, with documentary data collection strategy. The results show predominance of CP level 1 researches, with greater focus on product improvement, a smaller quantity of process modification studies (level 1 and internal recycling (level 2, and no evidence of TRIZ utilization was obtained on level 3 (external recycling and biogenic cycles. The proposed integration is promising, since both methodologies aim ideal situation and problems’ reduction. At the end, opportunities were detected for application of TRIZ in production processes, by means of functional analysis and Ideal Final Result (IFR, being possible to direct teams towards optimization of technical systems.

Phase-space path-integral calculation of the Wigner function

International Nuclear Information System (INIS)

Samson, J H

2003-01-01

The Wigner function W(q, p) is formulated as a phase-space path integral, whereby its sign oscillations can be seen to follow from interference between the geometrical phases of the paths. The approach has similarities to the path-centroid method in the configuration-space path integral. Paths can be classified by the midpoint of their ends; short paths where the midpoint is close to (q, p) and which lie in regions of low energy (low P function of the Hamiltonian) will dominate, and the enclosed area will determine the sign of the Wigner function. As a demonstration, the method is applied to a sequence of density matrices interpolating between a Poissonian number distribution and a number state, each member of which can be represented exactly by a discretized path integral with a finite number of vertices. Saddle-point evaluation of these integrals recovers (up to a constant factor) the WKB approximation to the Wigner function of a number state

Overview of design issues in product-integrated Photovoltaics

NARCIS (Netherlands)

Apostolou, G.; Reinders, Angelina H.M.E.

2014-01-01

This paper presents an overview of the design features and characteristics of photovoltaic (PV)-powered products based on a literature study on product-integrated PV and an analysis of 90 PV-powered products executed during 2011–2013. The aim of this paper is to provide insight into the current

INTEGRATED COST MODEL FOR IMPROVING THE PRODUCTION IN COMPANIES

Directory of Open Access Journals (Sweden)

Zuzana Hajduova

2014-12-01

Full Text Available Purpose: All processes in the company play important role in ensuring functional integrated management system. We point out the importance of need for a systematic approach to the use of quantitative, but especially statistical methods for modelling the cost of the improvement activities that are part of an integrated management system. Development of integrated management systems worldwide leads towards building of systematic procedures of implementation maintenance and improvement of all systems according to the requirements of all the sides involved.Methodology: Statistical evaluation of the economic indicators of improvement costs and the need for a systematic approach to their management in terms of integrated management systems have become a key role also in the management of processes in the company Cu Drôt, a.s. The aim of this publication is to highlight the importance of proper implementation of statistical methods in the process of improvement costs management in the integrated management system of current market conditions and document the legitimacy of a systematic approach in the area of monitoring and analysing indicators of improvement with the aim of the efficient process management of company. We provide specific example of the implementation of appropriate statistical methods in the production of copper wire in a company Cu Drôt, a.s. This publication also aims to create a model for the estimation of integrated improvement costs, which through the use of statistical methods in the company Cu Drôt, a.s. is used to support decision-making on improving efficiency.Findings: In the present publication, a method for modelling the improvement process, by an integrated manner, is proposed. It is a method in which the basic attributes of the improvement in quality, safety and environment are considered and synergistically combined in the same improvement project. The work examines the use of sophisticated quantitative, especially

Gene2Function: An Integrated Online Resource for Gene Function Discovery

Directory of Open Access Journals (Sweden)

Yanhui Hu

2017-08-01

Full Text Available One of the most powerful ways to develop hypotheses regarding the biological functions of conserved genes in a given species, such as humans, is to first look at what is known about their function in another species. Model organism databases and other resources are rich with functional information but difficult to mine. Gene2Function addresses a broad need by integrating information about conserved genes in a single online resource.

New Approaches to Aluminum Integral Foam Production with Casting Methods

Directory of Open Access Journals (Sweden)

Ahmet Güner

2015-08-01

Full Text Available Integral foam has been used in the production of polymer materials for a long time. Metal integral foam casting systems are obtained by transferring and adapting polymer injection technology. Metal integral foam produced by casting has a solid skin at the surface and a foam core. Producing near-net shape reduces production expenses. Insurance companies nowadays want the automotive industry to use metallic foam parts because of their higher impact energy absorption properties. In this paper, manufacturing processes of aluminum integral foam with casting methods will be discussed.

An integrated production-inventory model for food products adopting a general raw material procurement policy

Science.gov (United States)

Fauza, G.; Prasetyo, H.; Amanto, B. S.

2018-05-01

Studies on an integrated production-inventory model for deteriorating items have been done extensively. Most of the studies define deterioration as physical depletion of some inventories over time. This definition may not represent the deterioration characteristics of food products. The quality of food production decreases over time while the quantity remains the same. Further, in the existing models, the raw material is replenished several times (or at least once) within one production cycle. In food industries, however, a food company, for several reasons (e.g., the seasonal raw materials, discounted price, etc.) sometimes will get more benefit if it orders raw materials in a large quantity. Considering this fact, this research, therefore, is aimed at developing a more representative inventory model by (i) considering the quality losses in food and (ii) adopting a general raw material procurement policy. A mathematical model is established to represent the proposed policy in which the total profit of the system is the objective function. To evaluate the performance of the model, a numerical test was conducted. The numerical test indicates that the developed model has better performance, i.e., the total profit is 2.3% higher compared to the existing model.

An integrated new product development framework - an application on green and low-carbon products

Science.gov (United States)

Lin, Chun-Yu; Lee, Amy H. I.; Kang, He-Yau

2015-03-01

Companies need to be innovative to survive in today's competitive market; thus, new product development (NPD) has become very important. This research constructs an integrated NPD framework for developing new products. In stage one, customer attributes (CAs) and engineering characteristics (ECs) for developing products are collected, and fuzzy interpretive structural modelling (FISM) is applied to understand the relationships among these critical factors. Based on quality function deployment (QFD), a house of quality is then built, and fuzzy analytic network process (FANP) is adopted to calculate the relative importance of ECs. In stage two, fuzzy failure mode and effects analysis (FFMEA) is applied to understand the potential failures of the ECs and to determine the importance of ECs with respect to risk control. In stage three, a goal programming (GP) model is constructed to consider the outcome from the FANP-QFD, FFMEA and other objectives, in order to select the most important ECs. Due to pollution and global warming, environmental protection has become an important topic. With both governments and consumers developing environmental consciousness, successful green and low-carbon NPD provides an important competitive advantage, enabling the survival or renewal of firms. The proposed framework is implemented in a panel manufacturing firm for designing a green and low-carbon product.

System studies on Biofuel production via Integrated Biomass Gasification

Energy Technology Data Exchange (ETDEWEB)

Andersson, Jim; Lundgren, Joakim [Luleaa Univ. of Technology Bio4Energy, Luleaa (Sweden); Malek, Laura; Hulteberg, Christian [Lund Univ., Lund (Sweden); Pettersson, Karin [Chalmers Univ. of Technology, Goeteborg (Sweden); Wetterlund, Elisabeth [Linkoeping Univ. Linkoeping (Sweden)

2013-09-01

A large number of national and international techno-economic studies on industrially integrated gasifiers for production of biofuels have been published during the recent years. These studies comprise different types of gasifiers (fluidized bed, indirect and entrained flow) integrated in different industries for the production of various types of chemicals and transportation fuels (SNG, FT-products, methanol, DME etc.) The results are often used for techno-economic comparisons between different biorefinery concepts. One relatively common observation is that even if the applied technology and the produced biofuel are the same, the results of the techno-economic studies may differ significantly. The main objective of this project has been to perform a comprehensive review of publications regarding industrially integrated biomass gasifiers for motor fuel production. The purposes have been to identify and highlight the main reasons why similar studies differ considerably and to prepare a basis for fair techno-economic comparisons. Another objective has been to identify possible lack of industrial integration studies that may be of interest to carry out in a second phase of the project. Around 40 national and international reports and articles have been analysed and reviewed. The majority of the studies concern gasifiers installed in chemical pulp and paper mills where black liquor gasification is the dominating technology. District heating systems are also well represented. Only a few studies have been found with mechanical pulp and paper mills, steel industries and the oil refineries as case basis. Other industries have rarely, or not at all, been considered for industrial integration studies. Surprisingly, no studies regarding integration of biomass gasification neither in saw mills nor in wood pellet production industry have been found. In the published economic evaluations, it has been found that there is a large number of studies containing both integration and

Summing over Feynman histories by functional contour integration

International Nuclear Information System (INIS)

Garrison, J.C.; Wright, E.M.

1986-01-01

The authors show how complex paths can be consistently introduced into sums for Feynman histories by using the notion of functional contour integration. For a kappa-dimensional system specified by a potential with suitable analyticity properties, each coordinate axis is replaced by a copy of the complex plane, and at each instant of time a contour is chosen in each plane. This map from the time axis into the set of complex contours defines a functional contour. The family of contours labelled by time generates a (kappa+1)-dimensional submanifold of the (2kappa+1)-dimensional space defined by the cartesian product of the time axis and the coordinate planes. The complex Feynman paths lie on this submanifold. An application of this idea to systems described by absorptive potentials yields a simple derivation of the correct WKB result in terms of a complex path that extremalises the action. The method can also be applied to spherically symmetric potentials by using a partial wave expansion and restricting the contours appropriately. (author)

Minilivestock in Argentina. Integration with Agricultural Production

Directory of Open Access Journals (Sweden)

Biasatti, NR.

1999-01-01

Full Text Available The development of alternative agricultural production can take different forms. In Argentina there is an important diversity of species available to be incorporated into production systems, giving support for the use of natural resources based on taking advantage of the regional fauna. Moreover the use of different animal species can be incorporated under the concept of the optimization of flows of energy and materials, tending to minimize the environmental impact of livestock production, and also to make more efficient use of the ingredients required for developing the activity. The integration of non-traditional species (minilivestock within the context of sustainable agricultural development was the motivation for the present study A module for raising Myocastor coypus (coypu or false nutha was developed, to which was linked a module for raising Eisenia foetida (the socalled red worm, in both cases with a dual purpose. Preliminary estimates were made of the productive aspects of both species, as well as an analysis of their integration, to understand the extent to which diversification linked with complementation tends to optimize the system.

Strategies for designing novel functional meat products.

Science.gov (United States)

Arihara, Keizo

2006-09-01

In recent years, much attention has been paid to physiological functions of foods due to increasing concerns for health. Although there has been limited information of physiological functions of meat until recently, several attractive meat-based bioactive compounds, such as carnosine, anserine, l-carnitine, conjugated linoleic acid, have been studied. Emphasizing these activities is one possible approach for improving the health image of meat and developing functional meat products. This article provides potential benefits of representative meat-based bioactive compounds on human health and an overview of meat-based functional products. Strategies for designing novel functional meat products utilizing bioactive peptides and/or probiotic bacteria, is also discussed. This article focuses particularly on the possibility of meat protein-derived bioactive peptides, such as antihypertensive peptides. There are still some hurdles in developing and marketing novel functional meat products since such products are unconventional and consumers in many countries recognize meat and meat products to be bad for health. Along with accumulation of scientific data, there is an urgent need to inform consumers of the exact functional value of meat and meat products including novel functional foods.

Exact Slater integrals

International Nuclear Information System (INIS)

Golden, L.B.

1968-01-01

In atomic structure calculations, one has to evaluate the Slater integrals. In the present program, the authors evaluate exactly the Slater integral when hydrogenic wave functions are used for the bound-state orbitals. When hydrogenic wave functions are used, the Slater integrals involve integrands which can be written in the form of a product of an exponential, exp(ax) and a known analytic polynomial function, f(x). By repeated partial integration such an integral can be expressed in terms of a finite series involving the exponential, the polynomial function and its derivatives. PL/1-FORMAC has a built-in subroutine that will analytically find the derivatives of any multinomial. Thus, the finite series and hence the Slater integral can be evaluated analytically. (Auth.)

Product architecture development enabling integrated re-design of mechanical products

NARCIS (Netherlands)

Begelinger, R.E.; Post, E.; van Houten, F.J.A.M.; Kals, H.J.J.

1999-01-01

Global competition forces companies to increase their competitive advantage. The design process represents an interesting area to improve the overall business performance. There are two topics involved in improving the design process. The first one is the integration of constraints from the product

University of Maine Integrated Forest Product Refinery (IFPR) Technology Research

Energy Technology Data Exchange (ETDEWEB)

Pendse, Hemant P.

2010-11-23

This project supported research on science and technology that forms a basis for integrated forest product refinery for co-production of chemicals, fuels and materials using existing forest products industry infrastructure. Clear systems view of an Integrated Forest Product Refinery (IFPR) allowed development of a compelling business case for a small scale technology demonstration in Old Town ME for co-production of biofuels using cellulosic sugars along with pulp for the new owners of the facility resulting in an active project on Integrated Bio-Refinery (IBR) at the Old Town Fuel & Fiber. Work on production of advanced materials from woody biomass has led to active projects in bioplastics and carbon nanofibers. A lease for 40,000 sq. ft. high-bay space has been obtained to establish a Technology Research Center for IFPR technology validation on industrially relevant scale. UMaine forest bioproducts research initiative that began in April 2006 has led to establishment of a formal research institute beginning in March 2010.

FUNPACK-2, Subroutine Library, Bessel Function, Elliptical Integrals, Min-max Approximation

International Nuclear Information System (INIS)

Cody, W.J.; Garbow, Burton S.

1975-01-01

1 - Description of problem or function: FUNPACK is a collection of FORTRAN subroutines to evaluate certain special functions. The individual subroutines are (Identification/Description): NATSI0 F2I0 Bessel function I 0 ; NATSI1 F2I1 Bessel function I 1 ; NATSJ0 F2J0 Bessel function J 0 ; NATSJ1 F2J1 Bessel function J 1 ; NATSK0 F2K0 Bessel function K 0 ; NATSK1 F2K1 Bessel function K 1 ; NATSBESY F2BY Bessel function Y ν ; DAW F1DW Dawson's integral; DELIPK F1EK Complete elliptic integral of the first kind; DELIPE F1EE Complete elliptic integral of the second kind; DEI F1EI Exponential integrals; NATSPSI F2PS Psi (logarithmic derivative of gamma function); MONERR F1MO Error monitoring package . 2 - Method of solution: FUNPACK uses evaluation of min-max approximations

Integrating Molecular Computation and Material Production in an Artificial Subcellular Matrix

DEFF Research Database (Denmark)

Fellermann, Harold; Hadorn, Maik; Bönzli, Eva

Living systems are unique in that they integrate molecular recognition and information processing with material production on the molecular scale. Pre- dominant locus of this integration is the cellular matrix, where a multitude of biochemical reactions proceed simultaneously in highly compartmen......Living systems are unique in that they integrate molecular recognition and information processing with material production on the molecular scale. Pre- dominant locus of this integration is the cellular matrix, where a multitude of biochemical reactions proceed simultaneously in highly...... compartmentalized re- action compartments that interact and get delivered through vesicle trafficking. The European Commission funded project MatchIT (Matrix for Chemical IT) aims at creating an artificial cellular matrix that seamlessly integrates infor- mation processing and material production in much the same...

Improving occupational safety and health by integration into product development

DEFF Research Database (Denmark)

Broberg, Ole

1996-01-01

A cross-sectional case study was performed in a large company producing electro-mechanical products for industrial application. The objectives were: (i) to study the product development process and the role of key actors', (ii) to identify current practice on integrating occupational safety and h...... and studies of documents. A questionnaire regarding product development tasks and occupational safety and health were distributed to 30 design and production engineers. A total of 27 completed the questionnaire corresponding to a response rate of 90 per cent.......A cross-sectional case study was performed in a large company producing electro-mechanical products for industrial application. The objectives were: (i) to study the product development process and the role of key actors', (ii) to identify current practice on integrating occupational safety...... and health into the development process, especially the efforts and attitudes of design and production engineers', and (iii) to identify key actors'reflections on how to improve this integration. The study was based on qualitative as well as quantitative methods including interviews, questionnaires...

Integration of functions in logic database systems

NARCIS (Netherlands)

Lambrichts, E.; Nees, P.; Paredaens, J.; Peelman, P.; Tanca, L.

1990-01-01

We extend Datalog, a logic programming language for rule-based systems, by respectively integrating types, negation and functions. This extention of Datalog is called MilAnt. Furthermore, MilAnt consistency is defined as a stronger form of consistency for functions. It is known that consistency for

ENRICHMENT OF POULTRY PRODUCTS WITH FUNCTIONAL INGREDIENTS

Directory of Open Access Journals (Sweden)

Gordana Kralik

2012-06-01

Full Text Available Primary role of food is to provide nutritive stuffs in sufficient amounts to meet nutritive requirements. However, recent scientific findings confirm assumptions that particular food or its ingredients had positive physiological and psychological effects on health. Functional food is referred to food rich in ingredients, having beneficial effects on one or more functions in an organism. By consuming functional food consumers can expect some health benefits. Production of poultry products as functional food is getting more important on foreign markets while portion of such products on domestic food market is insignificant. The aim of this paper is to present possibilities for enrichment of poultry products, such as broiler and turkey meat and chicken eggs, as they can be characterized as functional food. Functional ingredients in poultry products are polyunsaturated fatty acids (LNA, EPA and DHA and antioxidants. Enrichment of poultry products with the stated ingredients that are beneficial for human health is subject of many researches, and only recently have researches been directed towards assessment of market sustainability of such products.

Zeroes of functions of Fresnel complementary integral type

Directory of Open Access Journals (Sweden)

Mario Alberto Villalobos Arias

2017-02-01

Full Text Available Theoretical upper and lower bounds are established for zeroes of a parametric family of functions which are defined by integrals of the same type as  the Fresnel complementary integral. Asymptotic properties for these bounds are obtained as well as monotony properties of the localization  intervals.  Given the value of the parameter an analytical-numerical procedure is deduced to enclose all  zeros of a given function with an a priori error.

Finding new relationships between hypergeometric functions by evaluating Feynman integrals

Energy Technology Data Exchange (ETDEWEB)

Kniehl, Bernd A. [Santa Barbara Univ., CA (United States). Kavli Inst. for Theoretical Physics; Tarasov, Oleg V. [Hamburg Univ. (Germany). 2. Inst. fuer Theoretische Physik

2011-08-15

Several new relationships between hypergeometric functions are found by comparing results for Feynman integrals calculated using different methods. A new expression for the one-loop propagator-type integral with arbitrary masses and arbitrary powers of propagators is derived in terms of only one Appell hypergeometric function F{sub 1}. From the comparison of this expression with a previously known one, a new relation between the Appell functions F{sub 1} and F{sub 4} is found. By comparing this new expression for the case of equal masses with another known result, a new formula for reducing the F{sub 1} function with particular arguments to the hypergeometric function {sub 3}F{sub 2} is derived. By comparing results for a particular one-loop vertex integral obtained using different methods, a new relationship between F{sub 1} functions corresponding to a quadratic transformation of the arguments is established. Another reduction formula for the F{sub 1} function is found by analysing the imaginary part of the two-loop self-energy integral on the cut. An explicit formula relating the F{sub 1} function and the Gaussian hypergeometric function {sub 2}F{sub 1} whose argument is the ratio of polynomials of degree six is presented. (orig.)

Energy Productivity of the High Velocity Algae Raceway Integrated Design (ARID-HV)

Energy Technology Data Exchange (ETDEWEB)

Attalah, Said; Waller, Peter M.; Khawam, George; Ryan, Randy D.; Huesemann, Michael H.

2015-06-03

The original Algae Raceway Integrated Design (ARID) raceway was an effective method to increase algae culture temperature in open raceways. However, the energy input was high and flow mixing was poor. Thus, the High Velocity Algae Raceway Integrated Design (ARID-HV) raceway was developed to reduce energy input requirements and improve flow mixing in a serpentine flow path. A prototype ARID-HV system was installed in Tucson, Arizona. Based on algae growth simulation and hydraulic analysis, an optimal ARID-HV raceway was designed, and the electrical energy input requirement (kWh ha-1 d-1) was calculated. An algae growth model was used to compare the productivity of ARIDHV and conventional raceways. The model uses a pond surface energy balance to calculate water temperature as a function of environmental parameters. Algae growth and biomass loss are calculated based on rate constants during day and night, respectively. A 10 year simulation of DOE strain 1412 (Chlorella sorokiniana) showed that the ARID-HV raceway had significantly higher production than a conventional raceway for all months of the year in Tucson, Arizona. It should be noted that this difference is species and climate specific and is not observed in other climates and with other algae species. The algae growth model results and electrical energy input evaluation were used to compare the energy productivity (algae production rate/energy input) of the ARID-HV and conventional raceways for Chlorella sorokiniana in Tucson, Arizona. The energy productivity of the ARID-HV raceway was significantly greater than the energy productivity of a conventional raceway for all months of the year.

Understanding integrated care: a comprehensive conceptual framework based on the integrative functions of primary care.

Science.gov (United States)

Valentijn, Pim P; Schepman, Sanneke M; Opheij, Wilfrid; Bruijnzeels, Marc A

2013-01-01

Primary care has a central role in integrating care within a health system. However, conceptual ambiguity regarding integrated care hampers a systematic understanding. This paper proposes a conceptual framework that combines the concepts of primary care and integrated care, in order to understand the complexity of integrated care. The search method involved a combination of electronic database searches, hand searches of reference lists (snowball method) and contacting researchers in the field. The process of synthesizing the literature was iterative, to relate the concepts of primary care and integrated care. First, we identified the general principles of primary care and integrated care. Second, we connected the dimensions of integrated care and the principles of primary care. Finally, to improve content validity we held several meetings with researchers in the field to develop and refine our conceptual framework. The conceptual framework combines the functions of primary care with the dimensions of integrated care. Person-focused and population-based care serve as guiding principles for achieving integration across the care continuum. Integration plays complementary roles on the micro (clinical integration), meso (professional and organisational integration) and macro (system integration) level. Functional and normative integration ensure connectivity between the levels. The presented conceptual framework is a first step to achieve a better understanding of the inter-relationships among the dimensions of integrated care from a primary care perspective.

Integrated Micro Product and Technology Development

DEFF Research Database (Denmark)

Hansen, Hans Nørgaard

2003-01-01

The paper addresses the issues of integrated micro product and technology development. The implications of the decisions in the design phase on the subsequent manufacturing processes are considered vital. A coherent process chain is a necessary prerequisite for the realisation of the industrial...... potential of micro technology....

Estimating state-contingent production functions

DEFF Research Database (Denmark)

Rasmussen, Svend; Karantininis, Kostas

The paper reviews the empirical problem of estimating state-contingent production functions. The major problem is that states of nature may not be registered and/or that the number of observation per state is low. Monte Carlo simulation is used to generate an artificial, uncertain production...... environment based on Cobb Douglas production functions with state-contingent parameters. The pa-rameters are subsequently estimated based on different sizes of samples using Generalized Least Squares and Generalized Maximum Entropy and the results are compared. It is concluded that Maximum Entropy may...

Integrated design strategy for product life-cycle management

Science.gov (United States)

Johnson, G. Patrick

2001-02-01

Two major trends suggest new considerations for environmentally conscious manufacturing (ECM) -- the continuation of dematerialization and the growing trend toward goods becoming services. A diversity of existing research could be integrated around those trends in ways that can enhance ECM. Major research-based achievements in information, computation, and communications systems, sophisticated and inexpensive sensing capabilities, highly automated and precise manufacturing technologies, and new materials continue to drive the phenomenon of dematerialization - the reduction of the material and energy content of per capita GDP. Knowledge is also growing about the sociology, economics, mathematics, management and organization of complex socio-economic systems. And that has driven a trend towards goods evolving into services. But even with these significant trends, the value of material, energy, information and human resources incorporated into the manufacture, use and disposal of modern products and services often far exceeds the benefits realized. Multi-disciplinary research integrating these drivers with advances in ECM concepts could be the basis for a new strategy of production. It is argued that a strategy of integrating information resources with physical and human resources over product life cycles, together with considering products as streams of service over time, could lead to significant economic payoff. That strategy leads to an overall design concept to minimize costs of all resources over the product life cycle to more fully capture benefits of all resources incorporated into modern products. It is possible by including life cycle monitoring, periodic component replacement, re-manufacture, salvage and human factor skill enhancement into initial design.

Increased microbial functional diversity under long-term organic and integrated fertilization in a paddy soil.

Science.gov (United States)

Ding, Long-Jun; Su, Jian-Qiang; Sun, Guo-Xin; Wu, Jin-Shui; Wei, Wen-Xue

2018-02-01

Microbes play key roles in diverse biogeochemical processes including nutrient cycling. However, responses of soil microbial community and functional genes to long-term integrated fertilization (chemical combined with organic fertilization) remain unclear. Here, we used pyrosequencing and a microarray-based GeoChip to explore the shifts of microbial community and functional genes in a paddy soil which received over 21-year fertilization with various regimes, including control (no fertilizer), rice straw (R), rice straw plus chemical fertilizer nitrogen (NR), N and phosphorus (NPR), NP and potassium (NPKR), and reduced rice straw plus reduced NPK (L-NPKR). Significant shifts of the overall soil bacterial composition only occurred in the NPKR and L-NPKR treatments, with enrichment of certain groups including Bradyrhizobiaceae and Rhodospirillaceae families that benefit higher productivity. All fertilization treatments significantly altered the soil microbial functional structure with increased diversity and abundances of genes for carbon and nitrogen cycling, in which NPKR and L-NPKR exhibited the strongest effect, while R exhibited the least. Functional gene structure and abundance were significantly correlated with corresponding soil enzymatic activities and rice yield, respectively, suggesting that the structural shift of the microbial functional community under fertilization might promote soil nutrient turnover and thereby affect yield. Overall, this study indicates that the combined application of rice straw and balanced chemical fertilizers was more pronounced in shifting the bacterial composition and improving the functional diversity toward higher productivity, providing a microbial point of view on applying a cost-effective integrated fertilization regime with rice straw plus reduced chemical fertilizers for sustainable nutrient management.

Integral transforms of the quantum mechanical path integral: Hit function and path-averaged potential

Science.gov (United States)

Edwards, James P.; Gerber, Urs; Schubert, Christian; Trejo, Maria Anabel; Weber, Axel

2018-04-01

We introduce two integral transforms of the quantum mechanical transition kernel that represent physical information about the path integral. These transforms can be interpreted as probability distributions on particle trajectories measuring respectively the relative contribution to the path integral from paths crossing a given spatial point (the hit function) and the likelihood of values of the line integral of the potential along a path in the ensemble (the path-averaged potential).

A cloud-based production system for information and service integration: an internet of things case study on waste electronics

Science.gov (United States)

Wang, Xi Vincent; Wang, Lihui

2017-08-01

Cloud computing is the new enabling technology that offers centralised computing, flexible data storage and scalable services. In the manufacturing context, it is possible to utilise the Cloud technology to integrate and provide industrial resources and capabilities in terms of Cloud services. In this paper, a function block-based integration mechanism is developed to connect various types of production resources. A Cloud-based architecture is also deployed to offer a service pool which maintains these resources as production services. The proposed system provides a flexible and integrated information environment for the Cloud-based production system. As a specific type of manufacturing, Waste Electrical and Electronic Equipment (WEEE) remanufacturing experiences difficulties in system integration, information exchange and resource management. In this research, WEEE is selected as the example of Internet of Things to demonstrate how the obstacles and bottlenecks are overcome with the help of Cloud-based informatics approach. In the case studies, the WEEE recycle/recovery capabilities are also integrated and deployed as flexible Cloud services. Supporting mechanisms and technologies are presented and evaluated towards the end of the paper.

A strategy for integrated low-input potato production

NARCIS (Netherlands)

Vereijken, P.H.; Loon, van C.D.

1991-01-01

Current systems of potato growing use large amounts of pesticides and fertilizers; these inputs are costly and cause environmental problems. In this paper a strategy for integrated low-input potato production is developed with the aim of reducing costs, improving product quality and reducing

Production Function of Outgassed Volatiles on Mercury: Implications for Polar Volatiles on Mercury and the Moon

Science.gov (United States)

Deutsch, A. N.; Head, J. W.

2018-05-01

We are interested in the flux of volatiles delivered to the polar regions of Mercury and the Moon through time. We integrate the production functions for volatile delivery from impacts, solar wind, and volcanism, which we focus on initially.

On solvability of some quadratic functional-integral equation in Banach algebra

International Nuclear Information System (INIS)

Darwish, M.A.

2007-08-01

Using the technique of a suitable measure of non-compactness in Banach algebra, we prove an existence theorem for some functional-integral equations which contain, as particular cases, a lot of integral and functional-integral equations that arise in many branches of nonlinear analysis and its applications. Also, the famous Chandrasekhar's integral equation is considered as a special case. (author)

The product of capacities and belief functions

DEFF Research Database (Denmark)

Hendon, Ebbe; Whitta-Jacobsen, Hans Jørgen; Sloth, Birgitte

1996-01-01

Capacities (monotone, non-additive set functions) have been suggested to describe situations of uncertainty. We examine the question of how to define the product of two independent capacities. In particular, for the product of two belief functions (totally monotone capacities), there is a unique...... minimal product belief function. This is characterized in several ways...

The product of capacities and belief functions

DEFF Research Database (Denmark)

Hendon, Ebbe; Jacobsen, Hans Jørgen; Sloth, Birgitte

1996-01-01

Capacities (monotone, non-additive set functions) have been suggested to describe situations of uncertainty. We examine the question of how to define the product of two independent capacities. In particular, for the product of two belief functions (totally monotone capacities), there is a unique...... minimal product belief function. This is characterized in several ways....

Product development for catering - how to integrate issues on nutrition, quality and environment in the products

DEFF Research Database (Denmark)

Jørgensen, Michael Søgaard

1996-01-01

Overview of the experience with integration of issues on nutrition, quality and environment from a development and technology assessment project about product development for the catering sector......Overview of the experience with integration of issues on nutrition, quality and environment from a development and technology assessment project about product development for the catering sector...

Functional integral representation of the nuclear many-body grand partition function

International Nuclear Information System (INIS)

Kerman, A.K.; Troudet, T.

1984-01-01

A local functional integral formulation of the nuclear many-body problem is proposed which is a generalization of the method previously developed. Its most interesting feature is that it allows an expansion of the many-body evolution operator around any arbitrary mean-field which takes into account the pairing correlations between the nucleons. This is explicitly illustrated for the nuclear many-body grand partition function for which special attention is paid to the static temperature-dependent Hartree-Fock-Bogolyubov (H.F.B.) approximation. Indeed, the temperature-dependent H.F.B. configuration appears to be the optimal choice from a variational point of view among all the possible independent quasi-particle motion approximations. An analytic approximation of the energy level density rho (E,A) is given using explicitly the arbitrariness in the choice of the mean-field and a possible numerical application is proposed. Finally, a new compact formulation of our functional integral that might be useful for future Monte Carlo calculations is proposed

Audiovisual Integration in High Functioning Adults with Autism

Science.gov (United States)

Keane, Brian P.; Rosenthal, Orna; Chun, Nicole H.; Shams, Ladan

2010-01-01

Autism involves various perceptual benefits and deficits, but it is unclear if the disorder also involves anomalous audiovisual integration. To address this issue, we compared the performance of high-functioning adults with autism and matched controls on experiments investigating the audiovisual integration of speech, spatiotemporal relations, and…

An Integrated Membrane Process for Butenes Production

Directory of Open Access Journals (Sweden)

Leonardo Melone

2016-11-01

Full Text Available Iso-butene is an important material for the production of chemicals and polymers. It can take part in various chemical reactions, such as hydrogenation, oxidation and other additions owing to the presence of a reactive double bond. It is usually obtained as a by-product of a petroleum refinery, by Fluidized Catalytic Cracking (FCC of naphtha or gas-oil. However, an interesting alternative to iso-butene production is n-butane dehydroisomerization, which allows the direct conversion of n-butane via dehydrogenation and successive isomerization. In this work, a simulation analysis of an integrated membrane system is proposed for the production and recovery of butenes. The dehydroisomerization of n-butane to iso-butene takes place in a membrane reactor where the hydrogen is removed from the reaction side with a Pd/Ag alloys membrane. Afterwards, the retentate and permeate post-processing is performed in membrane separation units for butenes concentration and recovery. Four different process schemes are developed. The performance of each membrane unit is analyzed by appropriately developed performance maps, to identify the operating conditions windows and the membrane permeation properties required to maximize the recovery of the iso-butene produced. An analysis of integrated systems showed a yield of butenes higher than the other reaction products with high butenes recovery in the gas separation section, with values of molar concentration between 75% and 80%.

Visual-motor integration functioning in a South African middle ...

African Journals Online (AJOL)

Visual-motor integration functioning has been identified as playing an integral role in different aspects of a child's development. Sensory-motor development is not only foundational to the physical maturation process, but is also imperative for progress with formal learning activities. Deficits in visual-motor integration have ...

A functional integrated data evaluation system for safeguards

International Nuclear Information System (INIS)

Argentesi, F.; Benoit, R.; Cuypers, M.; Guardini, S.; De Grandi, G.F.; Franklin, M.; Muller, K.; Rota, A.

1983-01-01

The quantitative assurance provided by the safeguards of nuclear material is based on the analysis of a very large amount of data of different origins and quality. They are generated by operators on a regular basis, or provided during discussions of facility attachments or declaration of production schedules. They are also generated by inspectors during their verification activities which are related to accountancy data, auditing, independent measurements, sealing, surveillance, etc. The Joint Research Centre and Safeguards Directorate of the Commission of the European Communities are studying a Functional Integrated Data Evaluation System (FIDES) for safeguards. A preliminary outline of such a system was presented at the 3rd ESARDA symposium at Karlsruhe. This paper first emphasises the decisional thread which underlies the ESARDA activities and, second, gives a progress report on JRC work which is designed to give effect to these ideas. This progess, reported below, covers two activities. The first is the automatic co-ordination of the operator's measurement system information with the operator's accounting declaration. The second element is the development of a functional structure for NDA data generation evaluation and transmission. (author)

On- and off-shell Jost functions and their integral representations

Indian Academy of Sciences (India)

interaction. The above equation involves certain tedious indefinite integrals. To circumvent these difficulties in analytical calculations, the irregular Green's function for Coulomb–. Yamaguchi potential is expressed in terms of pure Coulomb irregular Green's function and their integral transforms as. G(I )(r, r ) = GC(I)(r, r ) +.

Python Integration with a Functional DBMS

OpenAIRE

Zou, Hanzheng

2009-01-01

Python is an Object Oriented programming language and widely used nowadays. This report describes how to extend a functional database system Amos II for integration with Python. Several possibilities are analyzed to combine the Amos II C external interfaces with those of Python. Based on these discussions, new functionality has been added to the Python language by implementing a Python C external module. A basic API called PyAmos, interfacing Python and Amos II, is proposed and implemented in...

Choquet Integral of Fuzzy-Number-Valued Functions: The Differentiability of the Primitive with respect to Fuzzy Measures and Choquet Integral Equations

Directory of Open Access Journals (Sweden)

Zengtai Gong

2014-01-01

Full Text Available This paper deals with the Choquet integral of fuzzy-number-valued functions based on the nonnegative real line. We firstly give the definitions and the characterizations of the Choquet integrals of interval-valued functions and fuzzy-number-valued functions based on the nonadditive measure. Furthermore, the operational schemes of above several classes of integrals on a discrete set are investigated which enable us to calculate Choquet integrals in some applications. Secondly, we give a representation of the Choquet integral of a nonnegative, continuous, and increasing fuzzy-number-valued function with respect to a fuzzy measure. In addition, in order to solve Choquet integral equations of fuzzy-number-valued functions, a concept of the Laplace transformation for the fuzzy-number-valued functions in the sense of Choquet integral is introduced. For distorted Lebesgue measures, it is shown that Choquet integral equations of fuzzy-number-valued functions can be solved by the Laplace transformation. Finally, an example is given to illustrate the main results at the end of the paper.

Integration: valuing stakeholder input in setting priorities for socially sustainable egg production.

Science.gov (United States)

Swanson, J C; Lee, Y; Thompson, P B; Bawden, R; Mench, J A

2011-09-01

Setting directions and goals for animal production systems requires the integration of information achieved through internal and external processes. The importance of stakeholder input in setting goals for sustainable animal production systems should not be overlooked by the agricultural animal industries. Stakeholders play an integral role in setting the course for many aspects of animal production, from influencing consumer preferences to setting public policy. The Socially Sustainable Egg Production Project (SSEP) involved the development of white papers on various aspects of egg production, followed by a stakeholder workshop to help frame the issues for the future of sustainable egg production. Representatives from the environmental, food safety, food retail, consumer, animal welfare, and the general farm and egg production sectors participated with members of the SSEP coordination team in a 1.5-d workshop to explore socially sustainable egg production. This paper reviews the published literature on values integration methodologies and the lessons learned from animal welfare assessment models. The integration method used for the SSEP stakeholder workshop and its outcome are then summarized. The method used for the SSEP stakeholder workshop can be used to obtain stakeholder input on sustainable production in other farm animal industries.

Comultiplication in ABCD algebra and scalar products of Bethe wave functions

International Nuclear Information System (INIS)

Mikhailov, A.

1995-01-01

The representation of scalar products of Bethe wave functions in terms of dual fields, plays an important role in the theory of completely integrable models. The proof is based on the explicit expression for the open-quotes seniorclose quotes coefficient, which was guessed in the Izergin paper and then proved to satisfy some recurrent relations, which determine it unambiguously. In this paper we present an alternative proof based on direct computation. It uses the operation of comultiplication in the ABCD-algebra

An integrated design experience on a wet-tree production semisubmersible

Energy Technology Data Exchange (ETDEWEB)

Fales, Raymond P.; Lee, Craig; Chen Xiang; Zhengquan Zhou [ABB FPS Houston, TX (United States)

2004-07-01

The semisubmersible platform has been a reliable work platform for the offshore oil and gas industry for over 40 years. The Semisubmersible is a very mature concept with hundreds of examples in use. Traditionally during the design phase, the motions have been developed to suit the independent services, drilling, offshore operations or production. However, recently with the move to ultra-deep water depths and the use of Steel Catenary Risers (SCRs), the design of Semisubmersible has to be considered as an integrated floating production system, to satisfy all the requirements from platform global performance, SCRs strength and fatigue, mooring, topside payload and layout, hull strength, deck structure, marine system layout, stability, fabrication and installation. These requirements usually conflict each other. As such it is imperative to consider them together, adjusting the design parameters during design loops to obtain an optimal design product. This paper will describe the integrated design process used and the optimal design principles applied to satisfy these conflicting requirements and provide an example of a wet-tree production semisubmersible integrated design. Particular emphasis will be on global performance, SCR design, deck structure arrangement options, fabrication and integration. (author)

Integrated SNG Production in a Typical Nordic Sawmill

Directory of Open Access Journals (Sweden)

Sennai Mesfun

2016-04-01

Full Text Available Advanced biomass-based motor fuels and chemicals are becoming increasingly important to replace fossil energy sources within the coming decades. It is likely that the new biorefineries will evolve mainly from existing forest industry sites, as they already have the required biomass handling infrastructure in place. The main objective of this work is to assess the potential for increasing the profit margin from sawmill byproducts by integrating innovative downstream processes. The focus is on the techno-economic evaluation of an integrated site for biomass-based synthetic natural gas (bio-SNG production. The option of using the syngas in a biomass-integrated gasification combined cycle (b-IGCC for the production of electricity (instead of SNG is also considered for comparison. The process flowsheets that are used to analyze the energy and material balances are modelled in MATLAB and Simulink. A mathematical process integration model of a typical Nordic sawmill is used to analyze the effects on the energy flows in the overall site, as well as to evaluate the site economics. Different plant sizes have been considered in order to assess the economy-of-scale effect. The technical data required as input are collected from the literature and, in some cases, from experiments. The investment cost is evaluated on the basis of conducted studies, third party supplier budget quotations and in-house database information. This paper presents complete material and energy balances of the considered processes and the resulting process economics. Results show that in order for the integrated SNG production to be favored, depending on the sawmill size, a biofuel subsidy in the order of 28–52 €/MWh SNG is required.

Modelling of multidimensional quantum systems by the numerical functional integration

International Nuclear Information System (INIS)

Lobanov, Yu.Yu.; Zhidkov, E.P.

1990-01-01

The employment of the numerical functional integration for the description of multidimensional systems in quantum and statistical physics is considered. For the multiple functional integrals with respect to Gaussian measures in the full separable metric spaces the new approximation formulas exact on a class of polynomial functionals of a given summary degree are constructed. The use of the formulas is demonstrated on example of computation of the Green function and the ground state energy in multidimensional Calogero model. 15 refs.; 2 tabs

In search of an integrative measure of functioning.

Science.gov (United States)

Madden, Rosamond H; Glozier, Nick; Fortune, Nicola; Dyson, Maree; Gilroy, John; Bundy, Anita; Llewellyn, Gwynnyth; Salvador-Carulla, Luis; Lukersmith, Sue; Mpofu, Elias; Madden, Richard

2015-05-26

International trends towards people-centred, integrative care and support require any measurement of functioning and disability to meet multiple aims. The information requirements of two major Australian programs for disability and rehabilitation are outlined, and the findings of two searches for suitable measures of functioning and disability are analysed. Over 30 current measures of functioning were evaluated in each search. Neither search found a generic measure of functioning suitable for these multibillion dollar programs, relevant to a wide range of people with a variety of health conditions and functioning experiences, and capable of indicating support needs, associated costs, progress and outcomes. This unsuccessful outcome has implications internationally for policy-relevant information for disability, rehabilitation and related programs. The paper outlines the features of an Integrative Measure of Functioning (IMF) based on the concepts of functioning and environmental factors in the International Classification of Functioning, Disability and Health (ICF). An IMF would be applicable across a variety of health conditions, settings and purposes, ranging from individual assessment to public health. An IMF could deliver person-centred, policy-relevant information for a range of programs, promoting harmonised language and measurement and supporting international trends in human services and public health.

Extracellular Enzyme Composition and Functional Characteristics of Aspergillus niger An-76 Induced by Food Processing Byproducts and Based on Integrated Functional Omics.

Science.gov (United States)

Liu, Lin; Gong, Weili; Sun, Xiaomeng; Chen, Guanjun; Wang, Lushan

2018-02-07

Byproducts of food processing can be utilized for the production of high-value-added enzyme cocktails. In this study, we utilized integrated functional omics technology to analyze composition and functional characteristics of extracellular enzymes produced by Aspergillus niger grown on food processing byproducts. The results showed that oligosaccharides constituted by arabinose, xylose, and glucose in wheat bran were able to efficiently induce the production of extracellular enzymes of A. niger. Compared with other substrates, wheat bran was more effective at inducing the secretion of β-glucosidases from GH1 and GH3 families, as well as >50% of proteases from A1-family aspartic proteases. Compared with proteins induced by single wheat bran or soybean dregs, the protein yield induced by their mixture was doubled, and the time required to reach peak enzyme activity was shortened by 25%. This study provided a technical platform for the complex formulation of various substrates and functional analysis of extracellular enzymes.

Ergonomics Integration Omproving Production Process Management in Enterprises of Latvia

OpenAIRE

Henrijs Kaļķis

2013-01-01

Dotoral thesis ERGONOMICS INTEGRATION IMPROVING PRODUCTION PROCESS MANAGEMENT IN ENTERPRISES OF LATVIA ANNOTATION Ergonomics integration in process management has great significance in organisations` growth of productivity. It is a new approach to entrepreneurship and business strategy, where ergonomic aspects and values are taken into account in ensuring the effective process management and profitability of enterprises. This study is aimed at solution of the problem of e...

Environmental benefits of the integrated production of ethanol and biodiesel

International Nuclear Information System (INIS)

Souza, Simone Pereira; Seabra, Joaquim E.A.

2013-01-01

Highlights: ► Integrated bioenergy systems can favor the sustainability of biofuels. ► We analyzed the integrated production of ethanol and biodiesel in Brazil. ► GHG emissions and fossil energy use in the ethanol life cycle would be reduced. ► Socio-economic and other environmental aspects must be analyzed in future works. -- Abstract: The biorefinery of the future will be an integrated complex that makes a variety of products (e.g., biofuels, chemicals, power and protein) from a variety of feedstocks. The objective of this work was to evaluate the environmental benefits, compared to the traditional sugarcane ethanol system, of the integrated production of ethanol and biodiesel through a sugarcane–soybean biorefinery concept in Brazil. The environmental aspects considered here were the fossil energy use and the greenhouse gases (GHGs) emissions associated with ethanol production. In the Integrated System, soybean would be cultivated in part of the sugarcane reforming areas, which represents ∼17% of the total sugarcane area. Sugarcane and soybean oil would be processed in a combined ethanol–biodiesel plant, which would use only bagasse as fuel. All the demand for utilities of the biodiesel plant would be provided by the distillery. The output products of the combined plant would comprise sugarcane ethanol, soybean biodiesel (which would be used as diesel (B5) substitute in the sugarcane cultivation), bioelectricity and glycerin. The results indicate that the Integrated System can reduce the fossil energy consumption from 75 to 37 kJ/MJ of ethanol, when compared to the traditional system. For GHG emissions, the value would drop from 22.5 to 19.7 g CO 2 eq/MJ of ethanol. This analysis shows that the Integrated System is an important option to contribute to ethanol’s life cycle independence from fossil resources. This is an attractive environmental aspect, but socio-economic (as well as other environmental) aspects should also be analyzed in order to

Organizational bases of creation and functioning of the integrated structures in the investment in construction sphere

Directory of Open Access Journals (Sweden)

Subbotin Artem Sergeevich

2014-04-01

Full Text Available Integration is one of the results of the world industrial and economic processes globalization. Integration of production and commercial units and formation of modern structures of corporate level are one of current trends of development of the organization and management, both science, and practice. Formation and development of integrated structures became an important modern phenomenon in the organization of corporate level. Integration processes in organizations to large extend influence the relation of competitive strengths on the market and as a result the competitive ability of its objects. It is accepted to distinguish vertically and horizontally integrated structures. The use of the integrated structures allows providing steady development of investment and construction activity within state-private partnership, and thanks to its flexible structure it is capable to react to changes of external and internal factors quickly and adequately. Moreover, it is necessary to point out the possibility of using the cluster model in the process of describing functioning of integrated structures.

Integrating ergonomics into the product development process

DEFF Research Database (Denmark)

Broberg, Ole

1997-01-01

and production engineers regarding information sources in problem solving, communication pattern, perception of ergonomics, motivation and requests to support tools and methods. These differences and the social and organizational contexts of the development process must be taken into account when considering......A cross-sectional case study was performed in a large company producing electro-mechanical products for industrial application. The purpose was to elucidate conditions and strategies for integrating ergonomics into the product development process thereby preventing ergonomic problems at the time...... of manufacture of new products. In reality the product development process is not a rational problem solving process and does not proceed in a sequential manner as decribed in engineering models. Instead it is a complex organizational process involving uncertainties, iterative elements and negotiation between...

Water scarcity assessment of steel production in national integrated steelmaking route

Directory of Open Access Journals (Sweden)

D. Burchart-Korol

2015-01-01

Full Text Available The main goal of the study was the assessment of the water scarcity in steel production in integrated steelmaking route in Poland. The main goal of Water footprint (WF is quantifying and mapping of direct and indirect water use in life cycle of product or technology. In the paper Water Scarcity Indicators (WSI for steel production and unit processes in integrated steelmaking route was performed.

Bioactive Compounds in Functional Meat Products

OpenAIRE

Ewelina Pogorzelska-Nowicka; Atanas G. Atanasov; Jarosław Horbańczuk; Agnieszka Wierzbicka

2018-01-01

Meat and meat products are a good source of bioactive compounds with positive effect on human health such as vitamins, minerals, peptides or fatty acids. Growing food consumer awareness and intensified global meat producers competition puts pressure on creating new healthier meat products. In order to meet these expectations, producers use supplements with functional properties for animal diet and as direct additives for meat products. In the presented work seven groups of key functional cons...

Functional integral in supersymmetric quantum mechanics

International Nuclear Information System (INIS)

Ktitarev, D.V.

1990-01-01

The solution of the square root of the Schroedinger equation for the supersymmetric quantum mechanics is expressed in the form of series. The formula may be considered as a functional integral of the chronological exponent of the super-pseudodifferential operator symbol over the superspace. 10 refs

IRREVERSIBILITY GENERATION IN SUGAR, ALCOHOL AND BIOGAS INTEGRATED PRODUCTIONS

Directory of Open Access Journals (Sweden)

Meilyn González Cortés

2017-01-01

Full Text Available In this work, the stages of losses and lower exergetic efficiency are determined when the sugar production process is integrated with others for the production of products such as biogas, torula yeast and electricity. The study is carried out in three scenarios of integrated processes for obtaining the indicated products. A sugar factory in which sugar and electricity are produced is considered as the base scenario and from this; a second scenario is inferred in which alcohol is produced from the molasses of the sugar process and biogas from the vinasse of the alcohol distillation process. Finally, a third scenario is exergetically evaluated in which sugar, electricity, biogas and alcohol are produced, but this last one from juices and molasses of the sugar process. For the exergetic analysis the integrated scheme was divided into 8 subsystems. From the analysis of results, the major subsystems that generate irreversibilities are: cogeneration (64.36-65.98%, juice extraction (8.85-9.85%, crystallization and cooking, (8.48 -9.02%, fermentation (4.12-4.94% and distillation (2.74-3.2%. Improvements are proposed to minimize irreversibilities, including the thermal integration of processes, technological modifications in the fermentation process and the introduction of more efficient equipment for the generation of electricity. The exergetic efficiency is between 78.95-81.10%, obtaining greater exergetic efficiency in the scheme of joint operation to produce sugar, alcohol and biogas.

A symmetric integral identity for Bessel functions with applications to integral geometry

Science.gov (United States)

Salman, Yehonatan

2017-12-01

In the article of Kunyansky (Inverse Probl 23(1):373-383, 2007) a symmetric integral identity for Bessel functions of the first and second kind was proved in order to obtain an explicit inversion formula for the spherical mean transform where our data is given on the unit sphere in Rn . The aim of this paper is to prove an analogous symmetric integral identity in case where our data for the spherical mean transform is given on an ellipse E in R2 . For this, we will use the recent results obtained by Cohl and Volkmer (J Phys A Math Theor 45:355204, 2012) for the expansions into eigenfunctions of Bessel functions of the first and second kind in elliptical coordinates.

Research on the performance evaluation of agricultural products supply chain integrated operation

Science.gov (United States)

Jiang, Jiake; Wang, Xifu; Liu, Yang

2017-04-01

The agricultural product supply chain integrated operation can ensure the quality and efficiency of agricultural products, and achieve the optimal goal of low cost and high service. This paper establishes a performance evaluation index system of agricultural products supply chain integration operation based on the development status of agricultural products and SCOR, BSC and KPI model. And then, we constructing rough set theory and BP neural network comprehensive evaluation model with the aid of Rosetta and MATLAB tools and the case study is about the development of agricultural products integrated supply chain in Jing-Jin-Ji region. And finally, we obtain the corresponding performance results, and give some improvement measures and management recommendations to the managers.

Product integration rules at Clenshaw-Curtis and related points: A robust implementation

International Nuclear Information System (INIS)

Adam, G.; Nobile, A.

1989-12-01

Product integration rules generalizing the Fejer, Clenshaw-Curtis and Filippi quadrature rules respectively are derived for integrals with trigonometric and hyperbolic weight factors. The study puts in evidence the existence of well-conditioned fully analytic solutions, in terms of hypergeometric functions 0 F 1 . An a priori error estimator is discussed which is shown both to avoid wasteful invocation of the integration rule and to increase significantly the robustness of the automatic quadrature procedure. Then, specializing to extended Clenshaw-Curtis (ECC) rules, three types of a posteriori error estimates are considered and the existence of a great risk of their failure is put into evidence by large scale validation tests. An empirical error estimator, superseding them at slowly varying integrands, is found to result in a spectacular increase in the output reliability. Finally, enhancements in the control of the interval subdivision strategy aiming at increasing code robustness is discussed. Comparison with the code DQAWO of QUADPACK, extending over a statistics of about hundred thousand solved integrals, is illustrative for the increased robustness and error estimate reliability of our computer code implementation of the ECC rules. (author). 19 refs, 8 tabs

BIM-Integrated Construction Operation Simulation for Just-In-Time Production Management

Directory of Open Access Journals (Sweden)

WoonSeong Jeong

2016-10-01

Full Text Available Traditional construction planning, which depends on historical data and heuristic modification, prevents the integration of managerial details such as productivity dynamics. Specifically, the distance between planning and execution brings cost overruns and duration extensions. To minimize variations, this research presents a Building Information Modeling (BIM-integrated simulation framework for predicting productivity dynamics at the construction planning phase. To develop this framework, we examined critical factors affecting productivity at the operational level, and then forecast the productivity dynamics. The resulting plan includes specific commands for retrieving the required information from BIM and executing operation simulations. It consists of the following steps: (1 preparing a BIM model to produce input data; (2 composing a construction simulation at the operational level; and (3 obtaining productivity dynamics from the BIM-integrated simulation. To validate our framework, we applied it to a structural steel model; this was due to the significance of steel erections. By integrating BIM with construction operation simulations, we were able to create reliable construction plans that adapted to project changes. Our results show that the developed framework facilitates the reliable prediction of productivity dynamics, and can contribute to improved schedule reliability, optimized resource allocation, cost savings associated with buffers, and reduced material waste.

HTGR-Integrated Coal To Liquids Production Analysis

International Nuclear Information System (INIS)

Gandrik, Anastasia M.; Wood, Rick A.

2010-01-01

As part of the DOE's Idaho National Laboratory (INL) nuclear energy development mission, the INL is leading a program to develop and design a high temperature gas-cooled reactor (HTGR), which has been selected as the base design for the Next Generation Nuclear Plant. Because an HTGR operates at a higher temperature, it can provide higher temperature process heat, more closely matched to chemical process temperatures, than a conventional light water reactor. Integrating HTGRs into conventional industrial processes would increase U.S. energy security and potentially reduce greenhouse gas emissions (GHG), particularly CO2. This paper focuses on the integration of HTGRs into a coal to liquids (CTL) process, for the production of synthetic diesel fuel, naphtha, and liquefied petroleum gas (LPG). The plant models for the CTL processes were developed using Aspen Plus. The models were constructed with plant production capacity set at 50,000 barrels per day of liquid products. Analysis of the conventional CTL case indicated a potential need for hydrogen supplementation from high temperature steam electrolysis (HTSE), with heat and power supplied by the HTGR. By supplementing the process with an external hydrogen source, the need to 'shift' the syngas using conventional water-gas shift reactors was eliminated. HTGR electrical power generation efficiency was set at 40%, a reactor size of 600 MWth was specified, and it was assumed that heat in the form of hot helium could be delivered at a maximum temperature of 700 C to the processes. Results from the Aspen Plus model were used to perform a preliminary economic analysis and a life cycle emissions assessment. The following conclusions were drawn when evaluating the nuclear assisted CTL process against the conventional process: (1) 11 HTGRs (600 MWth each) are required to support production of a 50,000 barrel per day CTL facility. When compared to conventional CTL production, nuclear integration decreases coal consumption by 66

HTGR-INTEGRATED COAL TO LIQUIDS PRODUCTION ANALYSIS

Energy Technology Data Exchange (ETDEWEB)

Anastasia M Gandrik; Rick A Wood

2010-10-01

As part of the DOE’s Idaho National Laboratory (INL) nuclear energy development mission, the INL is leading a program to develop and design a high temperature gas-cooled reactor (HTGR), which has been selected as the base design for the Next Generation Nuclear Plant. Because an HTGR operates at a higher temperature, it can provide higher temperature process heat, more closely matched to chemical process temperatures, than a conventional light water reactor. Integrating HTGRs into conventional industrial processes would increase U.S. energy security and potentially reduce greenhouse gas emissions (GHG), particularly CO2. This paper focuses on the integration of HTGRs into a coal to liquids (CTL) process, for the production of synthetic diesel fuel, naphtha, and liquefied petroleum gas (LPG). The plant models for the CTL processes were developed using Aspen Plus. The models were constructed with plant production capacity set at 50,000 barrels per day of liquid products. Analysis of the conventional CTL case indicated a potential need for hydrogen supplementation from high temperature steam electrolysis (HTSE), with heat and power supplied by the HTGR. By supplementing the process with an external hydrogen source, the need to “shift” the syngas using conventional water-gas shift reactors was eliminated. HTGR electrical power generation efficiency was set at 40%, a reactor size of 600 MWth was specified, and it was assumed that heat in the form of hot helium could be delivered at a maximum temperature of 700°C to the processes. Results from the Aspen Plus model were used to perform a preliminary economic analysis and a life cycle emissions assessment. The following conclusions were drawn when evaluating the nuclear assisted CTL process against the conventional process: • 11 HTGRs (600 MWth each) are required to support production of a 50,000 barrel per day CTL facility. When compared to conventional CTL production, nuclear integration decreases coal

Exergy analysis of a combined heat and power plant with integrated lignocellulosic ethanol production

International Nuclear Information System (INIS)

Lythcke-Jørgensen, Christoffer; Haglind, Fredrik; Clausen, Lasse R.

2014-01-01

Highlights: • We model a system where lignocellulosic ethanol production is integrated with a combined heat and power (CHP) plant. • We conduct an exergy analysis for the ethanol production in six different system operation points. • Integrated operation, district heating (DH) production and low CHP loads all increase the exergy efficiency. • Separate operation has the largest negative impact on the exergy efficiency. • Operation is found to have a significant impact on the exergy efficiency of the ethanol production. - Abstract: Lignocellulosic ethanol production is often assumed integrated in polygeneration systems because of its energy intensive nature. The objective of this study is to investigate potential irreversibilities from such integration, and what impact it has on the efficiency of the integrated ethanol production. An exergy analysis is carried out for a modelled polygeneration system in which lignocellulosic ethanol production based on hydrothermal pretreatment is integrated in an existing combined heat and power (CHP) plant. The ethanol facility is driven by steam extracted from the CHP unit when feasible, and a gas boiler is used as back-up when integration is not possible. The system was evaluated according to six operation points that alternate on the following three different operation parameters: Load in the CHP unit, integrated versus separate operation, and inclusion of district heating production in the ethanol facility. The calculated standard exergy efficiency of the ethanol facility varied from 0.564 to 0.855, of which the highest was obtained for integrated operation at reduced CHP load and full district heating production in the ethanol facility, and the lowest for separate operation with zero district heating production in the ethanol facility. The results suggest that the efficiency of integrating lignocellulosic ethanol production in CHP plants is highly dependent on operation, and it is therefore suggested that the

Two-loop planar master integrals for the production of off-shell vector bosons in hadron collisions

International Nuclear Information System (INIS)

Henn, Johannes M.; Melnikov, Kirill; Smirnov, Vladimir A.

2014-01-01

We describe the calculation of all planar master integrals that are needed for the computation of NNLO QCD corrections to the production of two off-shell vector bosons in hadron collisions. The most complicated representatives of integrals in this class are the two-loop four-point functions where two external lines are on the light-cone and two other external lines have different invariant masses. We compute these and other relevant integrals analytically using differential equations in external kinematic variables and express our results in terms of Goncharov polylogarithms. The case of two equal off-shellnesses, recently considered in ref. http://dx.doi.org/10.1007/JHEP08(2013)070, appears as a particular case of our general solution

Production of functional bacteriorhodopsin by an Escherichia coli cell-free protein synthesis system supplemented with steroid detergent and lipid.

Science.gov (United States)

Shimono, Kazumi; Goto, Mie; Kikukawa, Takashi; Miyauchi, Seiji; Shirouzu, Mikako; Kamo, Naoki; Yokoyama, Shigeyuki

2009-10-01

Cell-free expression has become a highly promising tool for the efficient production of membrane proteins. In this study, we used a dialysis-based Escherichia coli cell-free system for the production of a membrane protein actively integrated into liposomes. The membrane protein was the light-driven proton pump bacteriorhodopsin, consisting of seven transmembrane alpha-helices. The cell-free expression system in the dialysis mode was supplemented with a combination of a detergent and a natural lipid, phosphatidylcholine from egg yolk, in only the reaction mixture. By examining a variety of detergents, we found that the combination of a steroid detergent (digitonin, cholate, or CHAPS) and egg phosphatidylcholine yielded a large amount (0.3-0.7 mg/mL reaction mixture) of the fully functional bacteriorhodopsin. We also analyzed the process of functional expression in our system. The synthesized polypeptide was well protected from aggregation by the detergent-lipid mixed micelles and/or lipid disks, and was integrated into liposomes upon detergent removal by dialysis. This approach might be useful for the high yield production of functional membrane proteins.

On calculation of zeta function of integral matrix

Czech Academy of Sciences Publication Activity Database

Janáček, Jiří

2009-01-01

Roč. 134, č. 1 (2009), s. 49-58 ISSN 0862-7959 R&D Projects: GA AV ČR(CZ) IAA100110502 Institutional research plan: CEZ:AV0Z50110509 Keywords : Epstein zeta function * integral lattice * Riemann theta function Subject RIV: BA - General Mathematics

Product Market Integration, Comparative Advantages and Labour Market Performance

DEFF Research Database (Denmark)

Andersen, Torben M.; Rose Skaksen, Jan

2004-01-01

of the specialization gains are similar to anincrease in labour productivity, whereas the labour market reform effectis similar to an increase in the degree of competition in the labourmarket. Wages, employment and welfare increase as a result of furtherproduct market integration. It is interesting to note......In this paper, we set up a two-country general equilibrium modelwhere trade unions have wage bargaining power. We show that adecrease in trade distortions inducing further product market integrationgives rise to specialization gains as well as a labour market reformeffect. The implications...... that the labourmarket reform effect of product market integration is achieved despitean increase in the wage level.JEL Classification: F15, J30, J50.Keywords: Trade frictions, wage formation, employment, welfaregains....

In Search of an Integrative Measure of Functioning

Directory of Open Access Journals (Sweden)

Rosamond H. Madden

2015-05-01

Full Text Available International trends towards people-centred, integrative care and support require any measurement of functioning and disability to meet multiple aims. The information requirements of two major Australian programs for disability and rehabilitation are outlined, and the findings of two searches for suitable measures of functioning and disability are analysed. Over 30 current measures of functioning were evaluated in each search. Neither search found a generic measure of functioning suitable for these multibillion dollar programs, relevant to a wide range of people with a variety of health conditions and functioning experiences, and capable of indicating support needs, associated costs, progress and outcomes. This unsuccessful outcome has implications internationally for policy-relevant information for disability, rehabilitation and related programs. The paper outlines the features of an Integrative Measure of Functioning (IMF based on the concepts of functioning and environmental factors in the International Classification of Functioning, Disability and Health (ICF. An IMF would be applicable across a variety of health conditions, settings and purposes, ranging from individual assessment to public health. An IMF could deliver person-centred, policy-relevant information for a range of programs, promoting harmonised language and measurement and supporting international trends in human services and public health.

Functional integration of automated system databases by means of artificial intelligence

Science.gov (United States)

Dubovoi, Volodymyr M.; Nikitenko, Olena D.; Kalimoldayev, Maksat; Kotyra, Andrzej; Gromaszek, Konrad; Iskakova, Aigul

2017-08-01

The paper presents approaches for functional integration of automated system databases by means of artificial intelligence. The peculiarities of turning to account the database in the systems with the usage of a fuzzy implementation of functions were analyzed. Requirements for the normalization of such databases were defined. The question of data equivalence in conditions of uncertainty and collisions in the presence of the databases functional integration is considered and the model to reveal their possible occurrence is devised. The paper also presents evaluation method of standardization of integrated database normalization.

Integrated product development and experience of communication in education

NARCIS (Netherlands)

H. Ihle; Ir. Dick van Schenk Brill; Ir. Peter van Kollenburg; Ir. H.E.V. Veenstra

2000-01-01

The Technical Departments at the Fontys University of Professional Education in Eindhoven, The Netherlands, offer a course which is devel-oped around the principles of Concurrent Engi-neering. Integrated Product Development (IPD) project teams are multi-disciplinary groups which develop products in

Economic Feasibility of Functional Meat Products for Commercial Production in India

Directory of Open Access Journals (Sweden)

Varalakshmi Kandanuri

2017-07-01

Full Text Available This paper analyses the production of functional chicken meat products from economic perspectives. It analyses and compares the economics and investment feasibility on different size groups of processing plants in India. The primary data on input use and output yield were taken from studies of NRCM and data was analysed using economic analysis and investment appraisal techniques like NPV, IRR(%, BC ratio, and Break even analysis. The results indicated that the cost of production of functional products was 5.2 and 5.18 and 4.59 US dollars per kg on small, medium and large scale units respectively. All the processing units are found to be economically feasible with NPV of US$ 12727, 64661 and 153703, IRR of 26%,31% and 42% and B-C ratio was estimated as 1.56, 1.78 and 2.29 for small, medium and large scale units respectively. Economies of scale is evident form all perspectives like production costs, profits, discounting measures and breakeven point. The study found the feasibility of functional meat products in India for commercial production.

On Generalized Fractional Integral Operators and the Generalized Gauss Hypergeometric Functions

Directory of Open Access Journals (Sweden)

Dumitru Baleanu

2014-01-01

Full Text Available A remarkably large number of fractional integral formulas involving the number of special functions, have been investigated by many authors. Very recently, Agarwal (National Academy Science Letters gave some integral transform and fractional integral formulas involving the Fpα,β·. In this sequel, here, we aim to establish some image formulas by applying generalized operators of the fractional integration involving Appell’s function F3(· due to Marichev-Saigo-Maeda. Some interesting special cases of our main results are also considered.

Green function on product networks

OpenAIRE

Arauz Lombardía, Cristina; Carmona Mejías, Ángeles; Encinas Bachiller, Andrés Marcos

2012-01-01

Our objective is to determine the Green function of product networks in terms of the Green function of one of the factor networks and the eigenvalues and eigenfunctions of the Schr odinger operator of the other factor network, which we consider that are known. Moreover, we use these results to obtain the Green function of spider networks in terms of Green functions over cicles and paths. Peer Reviewed

Peptides: Production, bioactivity, functionality, and applications

DEFF Research Database (Denmark)

Hajfathalian, Mona; Ghelichi, Sakhi; García Moreno, Pedro Jesús

2017-01-01

Production of peptides with various effects from proteins of different sources continues to receive academic attention. Researchers of different disciplines are putting increasing efforts to produce bioactive and functional peptides from different sources such as plants, animals, and food industry...... by-products. The aim of this review is to introduce production methods of hydrolysates and peptides and provide a comprehensive overview of their bioactivity in terms of their effects on immune, cardiovascular, nervous, and gastrointestinal systems. Moreover, functional and antioxidant properties...... of hydrolysates and isolated peptides are reviewed. Finally, industrial and commercial applications of bioactive peptides including their use in nutrition and production of pharmaceuticals and nutraceuticals are discussed....

On the functional integral approach in quantum statistics. 1. Some approximations

International Nuclear Information System (INIS)

Dai Xianxi.

1990-08-01

In this paper the susceptibility of a Kondo system in a fairly wide temperature region is calculated in the first harmonic approximation in a functional integral approach. The comparison with that of the renormalization group theory shows that in this region the two results agree quite well. The expansion of the partition function with infinite independent harmonics for the Anderson model is studied. Some symmetry relations are generalized. It is a challenging problem to develop a functional integral approach including diagram analysis, mixed mode effects and some exact relations in the Anderson system proved in the functional integral approach. These topics will be discussed in the next paper. (author). 22 refs, 1 fig

Process performance and product quality in an integrated continuous antibody production process.

Science.gov (United States)

Karst, Daniel J; Steinebach, Fabian; Soos, Miroslav; Morbidelli, Massimo

2017-02-01

Continuous manufacturing is currently being seriously considered in the biopharmaceutical industry as the possible new paradigm for producing therapeutic proteins, due to production cost and product quality related benefits. In this study, a monoclonal antibody producing CHO cell line was cultured in perfusion mode and connected to a continuous affinity capture step. The reliable and stable integration of the two systems was enabled by suitable control loops, regulating the continuous volumetric flow and adapting the operating conditions of the capture process. For the latter, an at-line HPLC measurement of the harvest concentration subsequent to the bioreactor was combined with a mechanistic model of the capture chromatographic unit. Thereby, optimal buffer consumption and productivity throughout the process was realized while always maintaining a yield above the target value of 99%. Stable operation was achieved at three consecutive viable cell density set points (20, 60, and 40 × 10 6 cells/mL), together with consistent product quality in terms of aggregates, fragments, charge isoforms, and N-linked glycosylation. In addition, different values for these product quality attributes such as N-linked glycosylation, charge variants, and aggregate content were measured at the different steady states. As expected, the amount of released DNA and HCP was significantly reduced by the capture step for all considered upstream operating conditions. This study is exemplary for the potential of enhancing product quality control and modulation by integrated continuous manufacturing. Biotechnol. Bioeng. 2017;114: 298-307. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

Exergy analysis of a combined heat and power plant with integrated lignocellulosic ethanol production

DEFF Research Database (Denmark)

Lythcke-Jørgensen, Christoffer Ernst; Haglind, Fredrik; Clausen, Lasse Røngaard

2014-01-01

production. An exergy analysis is carried out for a modelled polygeneration system in which lignocellulosic ethanol production based on hydrothermal pretreatment is integrated in an existing combined heat and power (CHP) plant. The ethanol facility is driven by steam extracted from the CHP unit when feasible...... district heating production in the ethanol facility. The results suggest that the efficiency of integrating lignocellulosic ethanol production in CHP plants is highly dependent on operation, and it is therefore suggested that the expected operation pattern of such polygeneration system is taken......Lignocellulosic ethanol production is often assumed integrated in polygeneration systems because of its energy intensive nature. The objective of this study is to investigate potential irreversibilities from such integration, and what impact it has on the efficiency of the integrated ethanol...

Irreducible integrable theories form tensor products of conformal models

International Nuclear Information System (INIS)

Mathur, S.D.; Warner, N.P.

1991-01-01

By using Toda field theories we show that there are perturbations of direct products of conformal theories that lead to irreducible integrable field theories. The same affine Toda theory can be truncated to different quantum integrable models for different choices of the charge at infinity and the coupling. The classification of integrable models that can be obtained in this fashion follows the classification of symmetric spaces of type G/H with rank H = rank G. (orig.)

Integrated forward/reverse logistics network design under uncertainty with pricing for collection of used products

DEFF Research Database (Denmark)

Fattahi, Mohammad; Govindan, Kannan

2017-01-01

This paper addresses design and planning of an integrated forward/reverse logistics network over a planning horizon with multiple tactical periods. In the network, demand for new products and potential return of used products are stochastic. Furthermore, collection amounts of used products...... with different quality levels are assumed dependent on offered acquisition prices to customer zones. A uniform distribution function defines the expected price of each customer zone for one unit of each used product. Using two-stage stochastic programming, a mixed-integer linear programming model is proposed....... To cope with demand and potential return uncertainty, Latin Hypercube Sampling method is applied to generate fan of scenarios and then, backward scenario reduction technique is used to reduce the number of scenarios. Due to the problem complexity, a novel simulation-based simulated annealing algorithm...

Integration in New Product Development: Case Study in a Large Brazilian

Directory of Open Access Journals (Sweden)

Daniel Jugend

2012-02-01

Full Text Available Proficiency in management activities undertaken in product development processes is regarded as a key competitive advantage for companies, particularly for high-tech industrial firms, which benefit from the important competitiveness factor of launching products with a differentiated technological content. This paper’s objective was to identify, through case study, practices for integration between the roles of R & D with others involved in product development in a large Brazilian company of industrial automation. The results suggest some management practices to improve the integration in new products development, such as the use of employees from marketing with knowledge and experience previously gained from R & D activities and uses the heavyweight product manager to solve synchronization problems between product and technology development.

Integrated batch production and maintenance scheduling for multiple items processed on a deteriorating machine to minimize total production and maintenance costs with due date constraint

Directory of Open Access Journals (Sweden)

Zahedi Zahedi

2016-04-01

Full Text Available This paper discusses an integrated model of batch production and maintenance scheduling on a deteriorating machine producing multiple items to be delivered at a common due date. The model describes the trade-off between total inventory cost and maintenance cost as the increase of production run length. The production run length is a time bucket between two consecutive preventive maintenance activities. The objective function of the model is to minimize total cost consisting of in process and completed part inventory costs, setup cost, preventive and corrective maintenance costs and rework cost. The problem is to determine the optimal production run length and to schedule the batches obtained from determining the production run length in order to minimize total cost.

Methanol production via pressurized entrained flow biomass gasification – Techno-economic comparison of integrated vs. stand-alone production

International Nuclear Information System (INIS)

Andersson, Jim; Lundgren, Joakim; Marklund, Magnus

2014-01-01

The main objective with this work was to investigate techno-economically the opportunity for integrated gasification-based biomass-to-methanol production in an existing chemical pulp and paper mill. Three different system configurations using the pressurized entrained flow biomass gasification (PEBG) technology were studied, one stand-alone plant, one where the bark boiler in the mill was replaced by a PEBG unit and one with a co-integration of a black liquor gasifier operated in parallel with a PEBG unit. The cases were analysed in terms of overall energy efficiency (calculated as electricity-equivalents) and process economics. The economics was assessed under the current as well as possible future energy market conditions. An economic policy support was found to be necessary to make the methanol production competitive under all market scenarios. In a future energy market, integrating a PEBG unit to replace the bark boiler was the most beneficial case from an economic point of view. In this case the methanol production cost was reduced in the range of 11–18 Euro per MWh compared to the stand-alone case. The overall plant efficiency increased approximately 7%-units compared to the original operation of the mill and the non-integrated stand-alone case. In the case with co-integration of the two parallel gasifiers, an equal increase of the system efficiency was achieved, but the economic benefit was not as apparent. Under similar conditions as the current market and when methanol was sold to replace fossil gasoline, co-integration of the two parallel gasifiers was the best alternative based on received IRR. - Highlights: • Techno-economic results regarding integration of methanol synthesis processes in a pulp and paper mill are presented. • The overall energy efficiency increases in integrated methanol production systems compared to stand-alone production units. • The economics of the integrated system improves compared to stand-alone alternatives. • Tax

Predicting estuarine benthic production using functional diversity

Directory of Open Access Journals (Sweden)

Marina Dolbeth

2014-05-01

Full Text Available We considered an estuarine system having naturally low levels of diversity, but attaining considerable high production levels, and being subjected to different sorts of anthropogenic impacts and climate events to investigate the relationship between diversity and secondary production. Functional diversity measures were used to predict benthic production, which is considered as a proxy of the ecosystem provisioning services. To this end, we used a 14-year dataset on benthic invertebrate community production from a seagrass and a sandflat habitat and we adopted a sequential modeling approach, where abiotic, trait community weighted means (CWM and functional diversity indices were tested by generalized linear models (GLM, and their significant variables were then combined to produce a final model. Almost 90% of variance of the benthic production could be predicted by combining the number of locomotion types, the absolute maximum atmospheric temperature (proxy of the heat waves occurrence, the type of habitat and the mean body mass, by order of importance. This result is in agreement with the mass ratio hypothesis, where ecosystem functions/services can be chiefly predicted by the dominant trait in the community, here measured as CWM. The increase of benthic production with the number of locomotion types may be seen as greater possibility of using the resources available in the system. Such greater efficiency would increase production. The other variables were also discussed in line of the previous hypothesis and taking into account the general positive relationship obtained between production and functional diversity indices. Overall, it was concluded that traits representative of wider possibilities of using available resources and higher functional diversity are related with higher benthic production.

Perturbation theory and importance functions in integral transport formulations

International Nuclear Information System (INIS)

Greenspan, E.

1976-01-01

Perturbation theory expressions for the static reactivity derived from the flux, collision density, birth-rate density, and fission-neutron density formulations of integral transport theory, and from the integro-differential formulation, are intercompared. The physical meaning and relation of the adjoint functions corresponding to each of the five formulations are established. It is found that the first-order approximation of the perturbation expressions depends on the transport theory formulation and on the adjoint function used. The approximations of the integro-differential formulation corresponding to different first-order approximations of the integral transport theory formulations are identified. It is found that the accuracy of all first-order approximations of the integral transport formulations examined is superior to the accuracy of first-order integro-differential perturbation theory

Bioactive Compounds in Functional Meat Products.

Science.gov (United States)

Pogorzelska-Nowicka, Ewelina; Atanasov, Atanas G; Horbańczuk, Jarosław; Wierzbicka, Agnieszka

2018-01-31

Meat and meat products are a good source of bioactive compounds with positive effect on human health such as vitamins, minerals, peptides or fatty acids. Growing food consumer awareness and intensified global meat producers competition puts pressure on creating new healthier meat products. In order to meet these expectations, producers use supplements with functional properties for animal diet and as direct additives for meat products. In the presented work seven groups of key functional constituents were chosen: (i) fatty acids; (ii) minerals; (iii) vitamins; (iv) plant antioxidants; (v) dietary fibers; (vi) probiotics and (vii) bioactive peptides. Each of them is discussed in term of their impact on human health as well as some quality attributes of the final products.

On Parameter Differentiation for Integral Representations of Associated Legendre Functions

Directory of Open Access Journals (Sweden)

Howard S. Cohl

2011-05-01

Full Text Available For integral representations of associated Legendre functions in terms of modified Bessel functions, we establish justification for differentiation under the integral sign with respect to parameters. With this justification, derivatives for associated Legendre functions of the first and second kind with respect to the degree are evaluated at odd-half-integer degrees, for general complex-orders, and derivatives with respect to the order are evaluated at integer-orders, for general complex-degrees. We also discuss the properties of the complex function f: C{−1,1}→C given by f(z=z/((z+1^{1/2}(z−1^{1/2}.

Employee subjective well-being and physiological functioning: An integrative model.

Science.gov (United States)

Kuykendall, Lauren; Tay, Louis

2015-01-01

Research shows that worker subjective well-being influences physiological functioning-an early signal of poor health outcomes. While several theoretical perspectives provide insights on this relationship, the literature lacks an integrative framework explaining the relationship. We develop a conceptual model explaining the link between subjective well-being and physiological functioning in the context of work. Integrating positive psychology and occupational stress perspectives, our model explains the relationship between subjective well-being and physiological functioning as a result of the direct influence of subjective well-being on physiological functioning and of their common relationships with work stress and personal resources, both of which are influenced by job conditions.

Integrated load distribution and production planning in series-parallel multi-state systems with failure rate depending on load

International Nuclear Information System (INIS)

Nourelfath, Mustapha; Yalaoui, Farouk

2012-01-01

A production system containing a set of machines (also called components) arranged according to a series-parallel configuration is addressed. A set of products must be produced in lots on this production system during a specified finite planning horizon. This paper presents a method for integrating load distribution decisions, and tactical production planning considering the costs of capacity change and the costs of unused capacity. The objective is to minimize the sum of capacity change costs, unused capacity costs, setup costs, holding costs, backorder costs, and production costs. The main constraints consist in satisfying the demand for all products over the entire horizon, and in not exceeding available repair resource. The production series-parallel system is modeled as a multi-state system with binary-state components. The proposed model takes into account the dependence of machines' failure rates on their load. Universal generating function technique can be used in the optimization algorithm for evaluating the expected system production rate in each period. We show how the formulated problem can be solved by comparing the results of several multi-product lot-sizing problems with capacity associated costs. The importance of integrating load distribution decisions and production planning is illustrated through numerical examples.

Constructing New Discrete Integrable Coupling System for Soliton Equation by Kronecker Product

International Nuclear Information System (INIS)

Yu Fajun; Zhang Hongqing

2008-01-01

It is shown that the Kronecker product can be applied to constructing new discrete integrable coupling system of soliton equation hierarchy in this paper. A direct application to the fractional cubic Volterra lattice spectral problem leads to a novel integrable coupling system of soliton equation hierarchy. It is also indicated that the study of discrete integrable couplings by using the Kronecker product is an efficient and straightforward method. This method can be used generally

Healthier meat products as functional foods.

Science.gov (United States)

Decker, Eric A; Park, Yeonhwa

2010-09-01

A promising approach to improving health care would be to produce a healthier food supply as a preventive health care strategy. The food supply could be improved by producing functional foods that have nutritional profiles that are healthier than conventional products. However, production of functional foods is not always easily accomplished since they must also taste good, be convenient and reasonably priced so that consumers will regularly purchase and use the products. Meats have great potential for delivering important nutrients such as fatty acids, minerals, dietary fiber, antioxidants and bioactive peptides into the diet. However, to produce successful products with these ingredients, technologies must be developed to increase their stability and decrease their flavor impact on muscle foods. In addition, many regulatory hurdles must be overcome for the commercial production of meats with added nutrients. These include redefinition of standard of identities and policies that allow front of the package nutritional claims. Without these regulatory changes, production of healthier meat products won't become a reality since these products would not have a competitive advantage over unfortified meats.

Cartesian integration of Grassmann variables over invariant functions

Energy Technology Data Exchange (ETDEWEB)

Kieburg, Mario; Kohler, Heiner; Guhr, Thomas [Universitaet Duisburg-Essen, Duisburg (Germany)

2009-07-01

Supersymmetry plays an important role in field theory as well as in random matrix theory and mesoscopic physics. Anticommuting variables are the fundamental objects of supersymmetry. The integration over these variables is equivalent to the derivative. Recently[arxiv:0809.2674v1[math-ph] (2008)], we constructed a differential operator which only acts on the ordinary part of the superspace consisting of ordinary and anticommuting variables. This operator is equivalent to the integration over all anticommuting variables of an invariant function. We present this operator and its applications for functions which are rotation invariant under the supergroups U(k{sub 1}/k{sub 2}) and UOSp(k{sub 1}/k{sub 2}).

New prospects in EU environmental policies. The Integrated Product Policy (IPP)

International Nuclear Information System (INIS)

Carnimeo, G.; Iraldo, F.

2000-01-01

The Integrated Product Policy - IPP - is becoming one of the top priorities for the European Commission within the framework of the product-oriented environmental policies. Rather than a new policy, this is an innovative approach aimed at co-originated existing and forthcoming environmental policies, in order to manage in an integrated way and minimise the impacts connected with the whole product life-cycle. The underlying life-cycle guideline requires the management of each phase by considering what happens in all the other phases. What clearly emerges from a research carried out by Iefe Bocconi is, on the one hand, the effectiveness of co-operation and networking between all the actors involved in the product environmental management within the different phases of its life cycle (policy makers, producers, retailers, consumers, NGOs, etc.) and, on the other, the opportunity of developing an integrated management of both environmental policy instruments and corporate management tools [it

Integrative modelling reveals mechanisms linking productivity and plant species richness.

Science.gov (United States)

Grace, James B; Anderson, T Michael; Seabloom, Eric W; Borer, Elizabeth T; Adler, Peter B; Harpole, W Stanley; Hautier, Yann; Hillebrand, Helmut; Lind, Eric M; Pärtel, Meelis; Bakker, Jonathan D; Buckley, Yvonne M; Crawley, Michael J; Damschen, Ellen I; Davies, Kendi F; Fay, Philip A; Firn, Jennifer; Gruner, Daniel S; Hector, Andy; Knops, Johannes M H; MacDougall, Andrew S; Melbourne, Brett A; Morgan, John W; Orrock, John L; Prober, Suzanne M; Smith, Melinda D

2016-01-21

How ecosystem productivity and species richness are interrelated is one of the most debated subjects in the history of ecology. Decades of intensive study have yet to discern the actual mechanisms behind observed global patterns. Here, by integrating the predictions from multiple theories into a single model and using data from 1,126 grassland plots spanning five continents, we detect the clear signals of numerous underlying mechanisms linking productivity and richness. We find that an integrative model has substantially higher explanatory power than traditional bivariate analyses. In addition, the specific results unveil several surprising findings that conflict with classical models. These include the isolation of a strong and consistent enhancement of productivity by richness, an effect in striking contrast with superficial data patterns. Also revealed is a consistent importance of competition across the full range of productivity values, in direct conflict with some (but not all) proposed models. The promotion of local richness by macroecological gradients in climatic favourability, generally seen as a competing hypothesis, is also found to be important in our analysis. The results demonstrate that an integrative modelling approach leads to a major advance in our ability to discern the underlying processes operating in ecological systems.

Integrated Metrics for Improving the Life Cycle Approach to Assessing Product System Sustainability

Directory of Open Access Journals (Sweden)

Wesley Ingwersen

2014-03-01

Full Text Available Life cycle approaches are critical for identifying and reducing environmental burdens of products. While these methods can indicate potential environmental impacts of a product, current Life Cycle Assessment (LCA methods fail to integrate the multiple impacts of a system into unified measures of social, economic or environmental performance related to sustainability. Integrated metrics that combine multiple aspects of system performance based on a common scientific or economic principle have proven to be valuable for sustainability evaluation. In this work, we propose methods of adapting four integrated metrics for use with LCAs of product systems: ecological footprint, emergy, green net value added, and Fisher information. These metrics provide information on the full product system in land, energy, monetary equivalents, and as a unitless information index; each bundled with one or more indicators for reporting. When used together and for relative comparison, integrated metrics provide a broader coverage of sustainability aspects from multiple theoretical perspectives that is more likely to illuminate potential issues than individual impact indicators. These integrated metrics are recommended for use in combination with traditional indicators used in LCA. Future work will test and demonstrate the value of using these integrated metrics and combinations to assess product system sustainability.

Evaluation of Container Closure System Integrity for Frozen Storage Drug Products.

Science.gov (United States)

Nieto, Alejandra; Roehl, Holger; Brown, Helen; Nikoloff, Jonas; Adler, Michael; Mahler, Hanns-Christian

2016-01-01

Sometimes, drug product for parenteral administration is stored in a frozen state (e.g., -20 °C or -80 °C), particularly during early stages of development of some biotech molecules in order to provide sufficient stability. Shipment of frozen product could potentially be performed in the frozen state, yet possibly at different temperatures, for example, using dry ice (-80 °C). Container closure systems of drug products usually consist of a glass vial, rubber stopper, and an aluminum crimped cap. In the frozen state, the glass transition temperature (Tg) of commonly used rubber stoppers is between -55 and -65 °C. Below their Tg, rubber stoppers are known to lose their elastic properties and become brittle, and thus potentially fail to maintain container closure integrity in the frozen state. Leaks during frozen temperature storage and transportation are likely to be transient, yet, can possibly risk container closure integrity and lead to microbial contamination. After thawing, the rubber stopper is supposed to re-seal the container closure system. Given the transient nature of the possible impact on container closure integrity in the frozen state, typical container closure integrity testing methods (used at room temperature conditions) are unable to evaluate and thus confirm container closure integrity in the frozen state. Here we present the development of a novel method (thermal physical container closure integrity) for direct assessment of container closure integrity by a physical method (physical container closure integrity) at frozen conditions, using a modified He leakage test. In this study, different container closure systems were evaluated with regard to physical container closure integrity in the frozen state to assess the suitability of vial/stopper combinations and were compared to a gas headspace method. In summary, the thermal physical container closure integrity He leakage method was more sensitive in detecting physical container closure

Predicting Protein Function via Semantic Integration of Multiple Networks.

Science.gov (United States)

Yu, Guoxian; Fu, Guangyuan; Wang, Jun; Zhu, Hailong

2016-01-01

Determining the biological functions of proteins is one of the key challenges in the post-genomic era. The rapidly accumulated large volumes of proteomic and genomic data drives to develop computational models for automatically predicting protein function in large scale. Recent approaches focus on integrating multiple heterogeneous data sources and they often get better results than methods that use single data source alone. In this paper, we investigate how to integrate multiple biological data sources with the biological knowledge, i.e., Gene Ontology (GO), for protein function prediction. We propose a method, called SimNet, to Semantically integrate multiple functional association Networks derived from heterogenous data sources. SimNet firstly utilizes GO annotations of proteins to capture the semantic similarity between proteins and introduces a semantic kernel based on the similarity. Next, SimNet constructs a composite network, obtained as a weighted summation of individual networks, and aligns the network with the kernel to get the weights assigned to individual networks. Then, it applies a network-based classifier on the composite network to predict protein function. Experiment results on heterogenous proteomic data sources of Yeast, Human, Mouse, and Fly show that, SimNet not only achieves better (or comparable) results than other related competitive approaches, but also takes much less time. The Matlab codes of SimNet are available at https://sites.google.com/site/guoxian85/simnet.

Towards the Proper Integration of Extra-Functional Requirements

Directory of Open Access Journals (Sweden)

Elke Hochmuller

1999-05-01

Full Text Available In spite of the many achievements in software engineering, proper treatment of extra-functional requirements (also known as non-functional requirements within the software development process is still a challenge to our discipline. The application of functionality-biased software development methodologies can lead to major contradictions in the joint modelling of functional and extra-functional requirements. Based on a thorough discussion on the nature of extra-functional requirements as well as on open issues in coping with them, this paper emphasizes the role of extra-functional requirements in the software development process. Particularly, a framework supporting the explicit integration of extra functional requirements into a conventional phase-driven process model is proposed and outlined.

Design of Smart Multi-Functional Integrated Aviation Photoelectric Payload

Science.gov (United States)

Zhang, X.

2018-04-01

To coordinate with the small UAV at reconnaissance mission, we've developed a smart multi-functional integrated aviation photoelectric payload. The payload weighs only 1kg, and has a two-axis stabilized platform with visible task payload, infrared task payload, laser pointers and video tracker. The photoelectric payload could complete the reconnaissance tasks above the target area (including visible and infrared). Because of its light weight, small size, full-featured, high integrated, the constraints of the UAV platform carrying the payload will be reduced a lot, which helps the payload suit for more extensive using occasions. So all users of this type of smart multi-functional integrated aviation photoelectric payload will do better works on completion of the ground to better pinpoint targets, artillery calibration, assessment of observe strike damage, customs officials and other tasks.

75 FR 16514 - Maxim Integrated Products, Formerly Known as Dallas Semiconductor, Dallas, TX; Amended...

Science.gov (United States)

2010-04-01

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-70,291] Maxim Integrated Products... Worker Adjustment Assistance on July 8th, 2009, applicable to workers of Maxim Integrated Products.... The workers produced integrated circuits (analog and mixed signal). Information shows that Maxim...

COTTAGE CHEESE PRODUCTS FUNCTIONALITY

Directory of Open Access Journals (Sweden)

L. V. Golubeva

2015-01-01

Full Text Available Cottage cheese products holds a significant place among the dairy and milk-containing products. The range of products includes cheese: cheese, pastes, creams, cakes, etc. Such diversity can be attributed to their popularity among the population and benefit brought by the body from regular use. Curd protein is much better and easier to digest by the body than protein fish, meat or milk. Rich curd products lysine and methionine. Minerals contained in cheese products have a positive effect on bone formation and structure of tissues. The composition of curd products, in addition to cheese and dairy ingredients may include non-dairy ingredients origin. Today, for the production of cheese products use the most advanced technologies to further enrich its structure and significantly improve the nutritional value. Pine nut is widely used in the manufacture of many dairy products. But, in most cases, the production of dairy products as a filler used pine nut cake, which deprives the finished product valuable cedar oil. The authors proposed a technology for producing curd product with the addition of pine nuts and honey (pine nuts and fructose. Compatible with cream cheese filling insertion determined sensory organoleptic point scale. he optimum dosage of components: pine nuts – 5 %, honey – 10 % fructose – 7 %. Technological process of cottage cheese product is different from the traditional operations training components and their introduction into the finished cheese. Identify indicators of quality of the new product. Production of curd products thus expanding the range of dairy products functional orientation.

ERF/ERFC, Calculation of Error Function, Complementary Error Function, Probability Integrals

International Nuclear Information System (INIS)

Vogel, J.E.

1983-01-01

1 - Description of problem or function: ERF and ERFC are used to compute values of the error function and complementary error function for any real number. They may be used to compute other related functions such as the normal probability integrals. 4. Method of solution: The error function and complementary error function are approximated by rational functions. Three such rational approximations are used depending on whether - x .GE.4.0. In the first region the error function is computed directly and the complementary error function is computed via the identity erfc(x)=1.0-erf(x). In the other two regions the complementary error function is computed directly and the error function is computed from the identity erf(x)=1.0-erfc(x). The error function and complementary error function are real-valued functions of any real argument. The range of the error function is (-1,1). The range of the complementary error function is (0,2). 5. Restrictions on the complexity of the problem: The user is cautioned against using ERF to compute the complementary error function by using the identity erfc(x)=1.0-erf(x). This subtraction may cause partial or total loss of significance for certain values of x

Structural-functional integrated concrete with macro-encapsulated inorganic PCM

Science.gov (United States)

Mohseni, Ehsan; Tang, Waiching; Wang, Zhiyu

2017-09-01

Over the last few years the application of thermal energy storage system incorporating phase change materials (PCMs) to foster productivity and efficiency of buildings energy has grown rapidly. In this study, a structural-functional integrated concrete was developed using macro-encapsulated PCM-lightweight aggregate (LWA) as partial replacement (25 and 50% by volume) of coarse aggregate in control concrete. The PCM-LWA was prepared by incorporation of an inorganic PCM into porous LWAs through vacuum impregnation. The mechanical and thermal performance of PCM-LWA concrete were studied. The test results revealed that though the compressive strength of concrete with PCM-LWA was lower than the control concrete, but ranged from 22.02 MPa to 42.88 MPa which above the minimum strength requirement for structural application. The thermal performance test indicated that macro-encapsulated PCM-LWA has underwent the phase change transition reducing the indoor temperature.

Some classes of analytic functions involving Noor integral operator

Science.gov (United States)

Patel, J.; Cho, N. E.

2005-12-01

The object of the present paper is to investigate some inclusion properties of certain subclasses of analytic functions defined by using the Noor integral operator. The integral preserving properties in connection with the operator are also considered. Relevant connections of the results presented here with those obtained in earlier works are pointed out.

On integral representation, relaxation and homogenization for unbounded functionals

International Nuclear Information System (INIS)

Carbone, L.; De Arcangelis, R.

1997-01-01

A theory of integral representation, relaxation and homogenization for some types of variational functionals taking extended real values and possibly being not finite also on large classes of regular functions is presented. Some applications to gradient constrained relaxation and homogenization problems are given

Production Functions Behaving Badly

DEFF Research Database (Denmark)

Fredholm, Thomas

This paper reconsiders Anwar Shaikh's critique of the neoclassical theory of growth and distribution based on its use of aggregate production functions. This is done by reconstructing and extending Franklin M. Fisher's 1971 computer simulations, which Shaikh used to support his critique. Together...

Transportation fuel production from gasified biomass integrated with a pulp and paper mill – Part A: Heat integration and system performance

International Nuclear Information System (INIS)

Isaksson, Johan; Jansson, Mikael; Åsblad, Anders; Berntsson, Thore

2016-01-01

Production of transportation fuels from biorefineries via biomass gasification has been suggested as a way of introducing renewable alternatives in the transportation system with an aim to reduce greenhouse gas emissions to the atmosphere. By co-locating gasification-based processes within heat demanding industries, excess heat from the gasification process can replace fossil or renewable fuels. The objective of this study was to compare the heat integration potential of four different gasification-based biorefinery concepts with a chemical pulp and paper mill. The results showed that the choice of end-product which was either methanol, Fischer-Tropsch crude, synthetic natural gas or electricity, can have significant impact on the heat integration potential with a pulp and paper mill and that the heat saving measures implemented in the mill in connection to integration of a gasification process can increase the biomass resource efficiency by up to 3%-points. Heat saving measures can reduce the necessary biomass input to the biorefinery by 50% if the sizing constraint is to replace the bark boiler with excess heat from the biorefinery. A large integrated gasification process with excess steam utilisation in a condensing turbine was beneficial only if grid electricity is produced at below 30% electrical efficiency. - Highlights: • Biomass gasification integrated with a pulp and paper mill. • Different sizing constraints of integrated biofuel production. • The biofuel product largely influence the heat integration potential. • An oversized gasifier for increased power production could be favourable.

Forest thinnings for integrated lumber and paper production

Science.gov (United States)

J.Y. Zhu; C.T. Scott; R. Gleisner; D. Mann; D.W. Vahey; D.P. Dykstra; G.H. Quinn; L.L. Edwards

2007-01-01

Integrated lumber and paper productions using forest thinning materials from U.S. national forests can significantly reduce the cost of prescriptive thinning operations. Many of the trees removed during forest thinnings are in small-diameter classes (diameter at breast height

USING DEMATEL-ANP INTEGRATED APPROACH FOR DECIDING PRODUCTION STRATEGY FOR A PRODUCTION LINE

Directory of Open Access Journals (Sweden)

Sinan APAK

2017-09-01

Full Text Available Production planning includes push, pull and hybrid production systems that production firms determine their production strategies according to many variables before starting production. The administration of this process requires experience and time. The intensity of rivalry makes this kind of decision processes important, because no firm has the luxury to waste time and to make a wrong decision. In order to solve this problem, research proposes to use integrated decision-making trial and evaluation laboratory (DEMATEL and analytic network process (ANP together which are methods of multi-criteria decision-making models. The process being used to establish which options are found to be most acceptable for operations managers has been demonstrated how applicable it is by using the generated model in automotive industry.

Calculation of atomic integrals using commutation relations

International Nuclear Information System (INIS)

Zamastil, J.; Vinette, F.; Simanek, M.

2007-01-01

In this paper, a numerically stable method of calculating atomic integrals is suggested. The commutation relations among the components of the angular momentum and the Runge-Lenz vector are used to deduce recurrence relations for the Sturmian radial functions. The radial part of the one- and two-electron integrals is evaluated by means of these recurrence relations. The product of two radial functions is written as a linear combination of the radial functions. This enables us to write the integrals over four radial functions as a linear combination of the integrals over two radial functions. The recurrence relations for the functions are used to derive the recursion relations for the coefficients of the linear combination and for the integrals over two functions

Energy expressions in density-functional theory using line integrals.

NARCIS (Netherlands)

van Leeuwen, R.; Baerends, E.J.

1995-01-01

In this paper we will address the question of how to obtain energies from functionals when only the functional derivative is given. It is shown that one can obtain explicit expressions for the exchange-correlation energy from approximate exchange-correlation potentials using line integrals along

A Riesz Representation Theorem for the Space of Henstock Integrable Vector-Valued Functions

Directory of Open Access Journals (Sweden)

Tomás Pérez Becerra

2018-01-01

Full Text Available Using a bounded bilinear operator, we define the Henstock-Stieltjes integral for vector-valued functions; we prove some integration by parts theorems for Henstock integral and a Riesz-type theorem which provides an alternative proof of the representation theorem for real functions proved by Alexiewicz.

Integrated Computer-aided Framework for Sustainable Chemical Product Design and Evaluation

DEFF Research Database (Denmark)

Kalakul, Sawitree; Cignitti, Stefano; Zhang, Lei

2016-01-01

This work proposes an integrated model-based framework for chemical product design and evaluation based on which the software, VPPD-Lab (The Virtual Product-Process Design Laboratory) has been developed. The framework allows the following options: (1) design a product using design templates...

Calculation of scalar products of wave functions and form factors in the framework of the algebraic Bethe ansatz

International Nuclear Information System (INIS)

Slavnov, N.A.

1989-01-01

The Bethe ansatz method is widely used to investigate two-dimensional completely integrable models. In the framework of the quantum inverse scattering method it has proved to be possible to construct an algebraic scheme of the Bethe ansatz, and this has been successfully applied to calculation of correlation functions. One of the important questions of the method is that of the scalar products of the wave functions. In particular, knowledge of the properties of the scalar products is necessary for investigating the form factors and correlation function. In the present paper the author considers a generalized model with R matrix of the model of the nonlinear Schroedinger equation. The main formulas and notation are given in Sec. 2. In Sec. 3 he calculates the scalar product of an arbitrary function and an eigenfunction of the Hamiltonian. The generalized two-site model is introduced in Sec. 4. In Sec. 5 he calculates the form factor of the particle number operator

Total and Direct Correlation Function Integrals from Molecular Simulation of Binary Systems

DEFF Research Database (Denmark)

Wedberg, Nils Hejle Rasmus Ingemar; O’Connell, John P.; Peters, Günther H.J.

2011-01-01

The possibility for obtaining derivative properties for mixtures from integrals of spatial total and direct correlation functions obtained from molecular dynamics simulations is explored. Theoretically well-supported methods are examined to extend simulation radial distribution functions to long...... are consistent with an excess Helmholtz energy model fitted to available simulations. In addition, simulations of water/methanol and water/t-butanol mixtures have been carried out. The method yields results for partial molar volumes, activity coefficient derivatives, and individual correlation function integrals...... in reasonable agreement with smoothed experimental data. The proposed method for obtaining correlation function integrals is shown to perform at least as well as or better than two previously published approaches....

On the elastostatic significance of four boundary integrals involving biharmonic functions

DEFF Research Database (Denmark)

Christiansen, Søren

1998-01-01

For a biharmonic function U, depending upon two space variables, it is known that four curve integrals, which involve U and some derivatives of U evaluated at a closed boundary, must be equal to zero. When U plays the role of an Airy stress function, we investigate the elastostatic significance o...... with the values of the four integrals. The computer algebra system Maple V has been an invaluable tool. By suitable comparisons among the various results obtained we are led to the conclusions about the elastostatic significance of the integrals....

Design, Fabrication, Characterization and Modeling of Integrated Functional Materials

Science.gov (United States)

2015-12-01

activities is expected to lead to new devices/ systems /composite materials useful for the USAMRMC. 15. SUBJECT TERMS Functional materials, integrated...fabrication, nanobiotechnology, multifunctional, dimensional integration, nanocomposites, sensor technology, thermoelectrics, solar cells, photovoltaics ...loop measured in the presence of an AC field, and can be increased by tuning several parameters, such as the nanoparticles’ size , saturation

Integrating knowledge based functionality in commercial hospital information systems.

Science.gov (United States)

Müller, M L; Ganslandt, T; Eich, H P; Lang, K; Ohmann, C; Prokosch, H U

2000-01-01

Successful integration of knowledge-based functions in the electronic patient record depends on direct and context-sensitive accessibility and availability to clinicians and must suit their workflow. In this paper we describe an exemplary integration of an existing standalone scoring system for acute abdominal pain into two different commercial hospital information systems using Java/Corba technolgy.

Optimization of magnetosome production by Acidithiobacillus ferrooxidans using desirability function approach

International Nuclear Information System (INIS)

Yan, Lei; Zhang, Shuang; Liu, Hetao; Wang, Weidong; Chen, Peng; Li, Hongyu

2016-01-01

Present study aimed to resolve the conflict between cell growth and magnetosome formation of Acidithiobacillus ferrooxidans (A. ferrooxidans) in batch experiments by applying response surface methodology (RSM) integrated a desirability function approach. The effects of several operating parameters on cell growth (OD_6_0_0) and magnetosome production (C_m_a_g) were evaluated. The maximum overall desirability (D) of 0.923 was achieved at iron concentration of 125.07 mM, shake speed of 122.37 rpm and nitrogen concentration of 2.40 g/L. Correspondingly, the OD_6_0_0 and C_m_a_g were 0.522 and 1.196, respectively. The confirmation experiment confirmed that the optimum OD_6_0_0 and C_m_a_g obtained were in good agreement with the predicted values. The inductively coupled plasma atomic emission spectrometer (ICP-AES) and transmission electron microscopy (TEM) analyses revealed that the production of magnetosomes could be improved via optimization. X-ray diffraction (XRD) showed the magnetosomes are magnetite. Results indicated that RSM with a desirability function was a useful technique to get the maximum OD_6_0_0 and C_m_a_g simultaneously. - Highlights: • Optimization of magnetosome production by A. ferrooxidans using BBD of RSM. • Desirability function was used for concurrent maximization of cell and magnetosome yield. • ICP-AES results showed an increase in intracellular iron content through optimizing. • TEM showed a 2.5 fold increase in magnetosome number after optimization. • The methodology demonstrated a useful tool with an overall desirability of 0.923.

An Integrated Modeling and Data Management Strategy for Cellulosic Biomass Production Decisions

Energy Technology Data Exchange (ETDEWEB)

David J. Muth Jr.; K. Mark Bryden; Joshua B. Koch

2012-07-01

Emerging cellulosic bioenergy markets can provide land managers with additional options for crop production decisions. Integrating dedicated bioenergy crops such as perennial grasses and short rotation woody species within the agricultural landscape can have positive impacts on several environmental processes including increased soil organic matter in degraded soils, reduced sediment loading in watersheds, lower green house gas (GHG) fluxes, and reduced nutrient loading in watersheds. Implementing this type of diverse bioenergy production system in a way that maximizes potential environmental benefits requires a dynamic integrated modeling and data management strategy. This paper presents a strategy for designing diverse bioenergy cropping systems within the existing row crop production landscape in the midwestern United States. The integrated model developed quantifies a wide range environmental processes including soil erosion from wind and water, soil organic matter changes, and soil GHG fluxes within a geospatial data management framework. This framework assembles and formats information from multiple spatial and temporal scales. The data assembled includes yield and productivity data from harvesting equipment at the 1m scale, surface topography data from LiDAR mapping at the less than 1m scale, soil data from US soil survey databases at the 10m to 100m scale, and climate data at the county scale. These models and data tools are assembled into an integrated computational environment that is used to determine sustainable removal rates for agricultural residues for bioenergy production at the sub-field scale under a wide range of land management practices. Using this integrated model, innovative management practices including cover cropping are then introduced and evaluated for their impact on bioenergy production and important environmental processes. The impacts of introducing dedicated energy crops onto high-risk landscape positions currently being manage in

Employee subjective well-being and physiological functioning: An integrative model

Directory of Open Access Journals (Sweden)

Lauren Kuykendall

2015-06-01

Full Text Available Research shows that worker subjective well-being influences physiological functioning—an early signal of poor health outcomes. While several theoretical perspectives provide insights on this relationship, the literature lacks an integrative framework explaining the relationship. We develop a conceptual model explaining the link between subjective well-being and physiological functioning in the context of work. Integrating positive psychology and occupational stress perspectives, our model explains the relationship between subjective well-being and physiological functioning as a result of the direct influence of subjective well-being on physiological functioning and of their common relationships with work stress and personal resources, both of which are influenced by job conditions.

The product form for path integrals on curved manifolds

Science.gov (United States)

Grosche, C.

1988-03-01

A general and simple framework for treating path integrals on curved manifolds is presented. The crucial point will be a product ansatz for the metric tensor and the quantum hamiltonian, i.e. we shall write g αβ = h αγh βγ and H = (1/2m)h αγp αp βh βγ + V + ΔV , respectively, a prescription which we shall call “product form” definition. The p α are hermitian momenta and Δ V is a well-defined quantum correction. We shall show that this ansatz, which looks quite special, is in fact - under reasonable assumptions in quantum mechanics - a very general one. We shall derive the lagrangian path integral in the “product form” definition and shall also prove that the Schro¨dinger equation can be derived from the corresponding short-time kernel. We shall discuss briefly an application of this prescription to the problem of free quantum motion on the Poincare´upper half-plane.

A New Framework for Evaluating the Functional Capabilities of Intra-Enterprise Application Integration Technologies

Directory of Open Access Journals (Sweden)

Hossein Moradi

2010-10-01

Full Text Available Enterprise Application Integration (EAI technologies facilitate the sharing of information and business processes of interrelated information systems in order to achieve the target integrated systems. Different EAI solutions and technologies provide various capabilities which lead to the complexity of their evaluation process. To reduce this complexity, appropriate tools for evaluating the functional capabilities of EAI technologies are required. This paper proposes a new framework for evaluating the functional capabilities of EAI technologies, which simplify the process of evaluating the functional capabilities of intra-enterprise integration technologies and solutions.The proposed framework for evaluating the EAI technologies was enhanced using the structural and conceptual aspects of previous frameworks. It offers a new schema for which various EAI technologies are categorized in different classes and are evaluated based on their supporting level for functional integration capabilities’ criteria.The new framework offers two lists containing integration technologies and their associated classifications, and functional capabilities of integration technologies. The proposed framework is a novel one which can be used by information system experts for evaluation and comparison purposes of various integration technologies.

On a new class of integrals involving Bessel functions of the first kind

Directory of Open Access Journals (Sweden)

P. Agarwal

2014-06-01

Full Text Available In recent years, several integral formulas involving a variety of special functions have been developed by many authors. Also many integral formulas containing the Bessel function $J_\

MILK PRODUCTION IN INTEGRATED SYSTEMS: REVIEW

Directory of Open Access Journals (Sweden)

H. A. Z. Biavatti

2014-09-01

Full Text Available The pasture degradation and thermic stress are in economic trouble for milk producers. The use of silvopastoral system (SSP is an important tool to minimize this loss, since it combines the production and conservation of natural resources, furthermore, provides the producer the potential to diversify the source of income of rural property, it is possible sale or own use of the products generated by the trees as timber, firewood and fruit. With the implementation of the SSP is possible to attenuate the effects of high temperatures caused by direct solar incidence on the animals, providing an ideal thermal comfort zone, resulting in increased production, it will expend less energy so that the animals are able to be as close as possible the necessary thermal comfort. Besides, with the adoption of this system, occurs a minor pasture degradation by promoting the formation of a microclimate favoring their establishment and maintenance, in addition to stabilizing soils, unpacked action of roots and preventing erosion. The purpose of this work was study the main aspects that affect the production of milk, proposing the use of integrated systems to minimize losses from thermal stress and degradation of pastures.

Integrating Emotional Attachment and Sustainability in Electronic Product Design

Directory of Open Access Journals (Sweden)

Alex Lobos

2013-03-01

Full Text Available Current models for Information and Communication Technology (ICT products encourage frequent product replacement with newer versions that offer only minor incremental improvements. This pattern, named planned obsolescence, diminishes user experience and shortens product lifespan. This paper presents the conceptual basis for a two-part integrated approach to combating planned obsolescence in ICT devices. First, design for emotional attachment, which creates products that users enjoy, value, and use for longer. Second, technological adaptability, which anticipates product upgrades and repairs as new technologies emerge. A model interdisciplinary design course in industrial design and sustainability, also described herein, trains students to apply this approach to create innovative ICT products with smaller environmental footprints.

42 CFR 455.232 - Medicaid integrity audit program contractor functions.

Science.gov (United States)

2010-10-01

... 42 Public Health 4 2010-10-01 2010-10-01 false Medicaid integrity audit program contractor functions. 455.232 Section 455.232 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL ASSISTANCE PROGRAMS PROGRAM INTEGRITY: MEDICAID Medicaid...

An integrated multi-stage supply chain inventory model with imperfect production process

Directory of Open Access Journals (Sweden)

Soumita Kundu

2015-09-01

Full Text Available This paper deals with an integrated multi-stage supply chain inventory model with the objective of cost minimization by synchronizing the replenishment decisions for procurement, production and delivery activities. The supply chain structure examined here consists of a single manufacturer with multi-buyer where manufacturer orders a fixed quantity of raw material from outside suppliers, processes the materials and delivers the finished products in unequal shipments to each customer. In this paper, we consider an imperfect production system, which produces defective items randomly and assumes that all defective items could be reworked. A simple algorithm is developed to obtain an optimal production policy, which minimizes the expected average total cost of the integrated production-inventory system.

Executive functions as predictors of visual-motor integration in children with intellectual disability.

Science.gov (United States)

Memisevic, Haris; Sinanovic, Osman

2013-12-01

The goal of this study was to assess the relationship between visual-motor integration and executive functions, and in particular, the extent to which executive functions can predict visual-motor integration skills in children with intellectual disability. The sample consisted of 90 children (54 boys, 36 girls; M age = 11.3 yr., SD = 2.7, range 7-15) with intellectual disabilities of various etiologies. The measure of executive functions were 8 subscales of the Behavioral Rating Inventory of Executive Function (BRIEF) consisting of Inhibition, Shifting, Emotional Control, Initiating, Working memory, Planning, Organization of material, and Monitoring. Visual-motor integration was measured with the Acadia test of visual-motor integration (VMI). Regression analysis revealed that BRIEF subscales explained 38% of the variance in VMI scores. Of all the BRIEF subscales, only two were statistically significant predictors of visual-motor integration: Working memory and Monitoring. Possible implications of this finding are further elaborated.

Experimental systems of integrated and organic wheat production

NARCIS (Netherlands)

Vereijken, P.H.

1989-01-01

The objectives and significance of integrated and organic farming are briefly discussed. In wheat production, the cropping methods involved are then described and compared to those of a conventional system. Initial results from an experimental farm at Nagele, The Netherlands, indicate that by an

Dhage Iteration Method for Generalized Quadratic Functional Integral Equations

Directory of Open Access Journals (Sweden)

Bapurao C. Dhage

2015-01-01

Full Text Available In this paper we prove the existence as well as approximations of the solutions for a certain nonlinear generalized quadratic functional integral equation. An algorithm for the solutions is developed and it is shown that the sequence of successive approximations starting at a lower or upper solution converges monotonically to the solutions of related quadratic functional integral equation under some suitable mixed hybrid conditions. We rely our main result on Dhage iteration method embodied in a recent hybrid fixed point theorem of Dhage (2014 in partially ordered normed linear spaces. An example is also provided to illustrate the abstract theory developed in the paper.

Weighted Anisotropic Integral Representations of Holomorphic Functions in the Unit Ball of

Directory of Open Access Journals (Sweden)

Arman Karapetyan

2010-01-01

Full Text Available We obtain weighted integral representations for spaces of functions holomorphic in the unit ball and belonging to area-integrable weighted -classes with “anisotropic” weight function of the type ∏=1(1−|1|2−|2|2−⋯−||2, =(1,2,…,∈. The corresponding kernels of these representations are estimated, written in an integral form, and even written out in an explicit form (for =2.

Integrable dissipative exclusion process: Correlation functions and physical properties

Science.gov (United States)

Crampe, N.; Ragoucy, E.; Rittenberg, V.; Vanicat, M.

2016-09-01

We study a one-parameter generalization of the symmetric simple exclusion process on a one-dimensional lattice. In addition to the usual dynamics (where particles can hop with equal rates to the left or to the right with an exclusion constraint), annihilation and creation of pairs can occur. The system is driven out of equilibrium by two reservoirs at the boundaries. In this setting the model is still integrable: it is related to the open XXZ spin chain through a gauge transformation. This allows us to compute the full spectrum of the Markov matrix using Bethe equations. We also show that the stationary state can be expressed in a matrix product form permitting to compute the multipoints correlation functions as well as the mean value of the lattice and the creation-annihilation currents. Finally, the variance of the lattice current is computed for a finite-size system. In the thermodynamic limit, it matches the value obtained from the associated macroscopic fluctuation theory.

Integrating transportation and production: an international study case

OpenAIRE

L Bertazzi; O Zappa

2012-01-01

The problem we study is inspired by the real case of Mesdan S.p.A., an Italian company worldwide leader in the textile machinery sector, which has two production units with two warehouses, one located in Italy (Brescia) and the other in China (Foshan). The critical point in this logistic system is the integration between production and transportation management, given the long distance between Brescia and Foshan. Shipments are performed by the means of different types of vehicles with differe...

Designing products as an integral part of choreography of interaction : the product's form as an integral part of movement

NARCIS (Netherlands)

Klooster, S.; Overbeeke, C.J.; Feijs, L.; Kyffin, S.; Young, B.

2005-01-01

Recent developments in design research concentrate on two themes (1) the unity of form, function and interaction and (2) the semantics of movement. The Design Movement approach incorporates unity of form, function and interaction through movement. Design Movement introduces the design of products as

Functional integral for non-Lagrangian systems

CERN Document Server

Kochan, Denis

2010-01-01

A novel functional integral formulation of quantum mechanics for non-Lagrangian systems is presented. The new approach, which we call "stringy quantization," is based solely on classical equations of motion and is free of any ambiguity arising from Lagrangian and/or Hamiltonian formulation of the theory. The functionality of the proposed method is demonstrated on several examples. Special attention is paid to the stringy quantization of systems with a general A-power friction force $-\\kappa[\\dot{q}]^A$. Results for $A = 1$ are compared with those obtained in the approaches by Caldirola-Kanai, Bateman and Kostin. Relations to the Caldeira-Leggett model and to the Feynman-Vernon approach are discussed as well.

Chemical product and function dataset

Data.gov (United States)

U.S. Environmental Protection Agency — Merged product weight fraction and chemical function data. This dataset is associated with the following publication: Isaacs , K., M. Goldsmith, P. Egeghy , K....

Mediating relationship of differential products in understanding integration in introductory physics

Science.gov (United States)

Amos, Nathaniel; Heckler, Andrew F.

2018-01-01

In the context of introductory physics, we study student conceptual understanding of differentials, differential products, and integrals and possible pathways to understanding these quantities. We developed a multiple choice conceptual assessment employing a variety of physical contexts probing physical understanding of these three quantities and administered the instrument to over 1000 students in first and second semester introductory physics courses. Using a regression-based mediation analysis with conceptual understanding of integration as the dependent variable, we found evidence consistent with a simple mediation model: the relationship between differentials scores and integral scores may be mediated by the understanding of differential products. The indirect effect (a quantifiable metric of mediation) was estimated as a b =0.29 , 95% CI [0.25, 0.33] for N =1102 Physics 1 students, and a b =0.27 , 95% CI [0.14, 0.48] for N =65 Physics 2 students. We also find evidence that the physical context of the questions can be an important factor. These results imply that for introductory physics courses, instructional emphasis first on differentials then on differential products in a variety of contexts may in turn promote better integral understanding.

Integral Presentations of Catalan Numbers

Science.gov (United States)

Dana-Picard, Thierry

2010-01-01

We compute in three different ways the same definite parametric integral. By-products are the derivation of a combinatorial identity and two integral presentations of Catalan numbers. One of them leads to a presentation using the [gamma] function.

Cost of product functions using analysis of value

Directory of Open Access Journals (Sweden)

Luminita Parv

2016-09-01

Full Text Available The value of use is a specific notion but of a great generality that makes the product be regarded as a complex system that transforms itself in time, thus undergoing evolution. Therefore, the product is important not in itself, but for the sake of the requirements it satisfies and for the functions it provides. In the analysis of value there are connections of a technical nature that implicitly lead to connections of an economic nature. Thus, the method of the ”analysis of value” will actually examine the cost of product functions, the aim of the method being the balance of functions costs on the basis of their importance for the product. Identifying the functions represents one of the important stages of the analysis of value. The difficulty in fixing the functions derives from the fact that there are not any rules clear enough for this activity, but only principles

Asset management: integrated software optimizes production performance

Energy Technology Data Exchange (ETDEWEB)

Polczer, S.

1998-06-01

Two new multi-dimensional databases, which expand the `row and column` concept of spreadsheets into multiple categories of data called dimensions, are described. These integrated software packages provide the foundation for industry players such as Poco Petroleum Ltd and Numac Energy Inc to gain a competitive advantage, by overhauling their respective data collection and retrieval systems to allow for timely cost analysis and financial reporting. Energy Warehouse, an on-line analytical processing product marketed by SysGold Ltd, is one of the software products described. It gathers various sources of information, allows advanced searches and generates reports previously unavailable in other conventional financial accounting systems. The second product discussed - the Canadian Upstream Energy System (CUES) - is an on-line analytical processing system developed by Oracle Corporation and Calgary-based Applied Terravision Systems (ATS) Inc. CUES combines Oracle`s universal data server and software development tools with ATS`s upstream financial, land, geotechnical and production applications. The software also allows for optimization of facilities, analysis of production efficiencies and comparison of performance against industry standards.

Abelian Chern endash Simons theory. II. A functional integral approach

International Nuclear Information System (INIS)

Manoliu, M.

1998-01-01

Following Witten, [Commun. Math. Phys. 21, 351 endash 399 (1989)] we approach the Abelian quantum Chern endash Simons (CS) gauge theory from a Feynman functional integral point of view. We show that for 3-manifolds with and without a boundary the formal functional integral definitions lead to mathematically proper expressions that agree with the results from the rigorous construction [J. Math. Phys. 39, 170 endash 206 (1998)] of the Abelian CS topological quantum field theory via geometric quantization. copyright 1998 American Institute of Physics

Total Correlation Function Integrals and Isothermal Compressibilities from Molecular Simulations

DEFF Research Database (Denmark)

Wedberg, Rasmus; Peters, Günther H.j.; Abildskov, Jens

2008-01-01

Generation of thermodynamic data, here compressed liquid density and isothermal compressibility data, using molecular dynamics simulations is investigated. Five normal alkane systems are simulated at three different state points. We compare two main approaches to isothermal compressibilities: (1...... in approximately the same amount of time. This suggests that computation of total correlation function integrals is a route to isothermal compressibility, as accurate and fast as well-established benchmark techniques. A crucial step is the integration of the radial distribution function. To obtain sensible results...

Computation of Green function of the Schroedinger-like partial differential equations by the numerical functional integration

International Nuclear Information System (INIS)

Lobanov, Yu.Yu.; Shahbagian, R.R.; Zhidkov, E.P.

1991-01-01

A new method for numerical solution of the boundary problem for Schroedinger-like partial differential equations in R n is elaborated. The method is based on representation of multidimensional Green function in the form of multiple functional integral and on the use of approximation formulas which are constructed for such integrals. The convergence of approximations to the exact value is proved, the remainder of the formulas is estimated. Method reduces the initial differential problem to quadratures. 16 refs.; 7 tabs

Integrating cell-free biosyntheses of heme prosthetic group and apoenzyme for the synthesis of functional P450 monooxygenase.

Science.gov (United States)

Kwon, Yong-Chan; Oh, In-Seok; Lee, Nahum; Lee, Kyung-Ho; Yoon, Yeo Joon; Lee, Eun Yeol; Kim, Byung-Gee; Kim, Dong-Myung

2013-04-01

Harnessing the isolated protein synthesis machinery, cell-free protein synthesis reproduces the cellular process of decoding genetic information in artificially controlled environments. More often than not, however, generation of functional proteins requires more than simple translation of genetic sequences. For instance, many of the industrially important enzymes require non-protein prosthetic groups for biological activity. Herein, we report the complete cell-free biogenesis of a heme prosthetic group and its integration with concurrent apoenzyme synthesis for the production of functional P450 monooxygenase. Step reactions required for the syntheses of apoenzyme and the prosthetic group have been designed so that these two separate pathways take place in the same reaction mixture, being insulated from each other. Combined pathways for the synthesis of functional P450 monooxygenase were then further integrated with in situ assay reactions to enable real-time measurement of enzymatic activity during its synthesis. Copyright © 2012 Wiley Periodicals, Inc.

Some effects of integrated production planning in large-scale kitchens

DEFF Research Database (Denmark)

Engelund, Eva Høy; Friis, Alan; Jacobsen, Peter

2005-01-01

Integrated production planning in large-scale kitchens proves advantageous for increasing the overall quality of the food produced and the flexibility in terms of a diverse food supply. The aim is to increase the flexibility and the variability in the production as well as the focus on freshness ...

Heavy Flavour Production as Probe of Gluon Sivers Function

International Nuclear Information System (INIS)

Godbole, Rohini M.; Kaushik, Abhiram; Misra, Anuradha; Rawoot, Vaibhav; Sonawane, Bipin

2017-01-01

Heavy flavour production like J/ψ and D-meson production in scattering of electrons/unpolarized protons off polarized proton target offer promising probes to investigate gluon Sivers function. In this talk, I will summarize our recent work on transverse single spin asymmetry in J/ψ-production and D-meson production in pp↑ scattering using a generalized parton model approach. We compare predictions obtained using different models of gluon Sivers function within this approach and then, taking into account the transverse momentum dependent evolution of the unpolarized parton distribution functions and gluon Sivers function, we study the effect of evolution on asymmetry. (author)

Supplier integration in product development: A matter of designing the project structure

Directory of Open Access Journals (Sweden)

Mike Danilovic

2007-11-01

Full Text Available In product development close collaboration between systems integrators and suppliers is important. The purpose of this article is to investigate the impact of the work breakdown structure (WBS and work packages (WPs in product development on the possibility of carrying through the strategy of supplier involvement into collaborative practice and to investigate how supplier involvement can be improved by altering the design of collaborative WBS and WP structures. Dependence Structure Matrix (DSM is introduced in order to analyse, visualise and manage interdependencies, in terms of information exchange between the systems integrator and supplier. This article shows how DSM can support the alternative design of integrated and collaborative WBS and integrated WPs following the logic of dependencies and the flow of information in order to support a strategy focusing on integration of suppliers on project and team level.

Integration of design and inspection

Science.gov (United States)

Simmonds, William H.

1990-08-01

Developments in advanced computer integrated manufacturing technology, coupled with the emphasis on Total Quality Management, are exposing needs for new techniques to integrate all functions from design through to support of the delivered product. One critical functional area that must be integrated into design is that embracing the measurement, inspection and test activities necessary for validation of the delivered product. This area is being tackled by a collaborative project supported by the UK Government Department of Trade and Industry. The project is aimed at developing techniques for analysing validation needs and for planning validation methods. Within the project an experimental Computer Aided Validation Expert system (CAVE) is being constructed. This operates with a generalised model of the validation process and helps with all design stages: specification of product requirements; analysis of the assurance provided by a proposed design and method of manufacture; development of the inspection and test strategy; and analysis of feedback data. The kernel of the system is a knowledge base containing knowledge of the manufacturing process capabilities and of the available inspection and test facilities. The CAVE system is being integrated into a real life advanced computer integrated manufacturing facility for demonstration and evaluation.

Integrated plant information technology design support functionality

International Nuclear Information System (INIS)

Kim, Yeon Seung; Kim, Dae Jin; Barber, P. W.; Goland, D.

1996-06-01

This technical report was written as a result of Integrated Plant Information System (IPIS) feasibility study on CANDU 9 project which had been carried out from January, 1994 to March, 1994 at AECL (Atomic Energy Canada Limited) in Canada. From 1987, AECL had done endeavour to change engineering work process from paper based work process to computer based work process through CANDU 3 project. Even though AECL had a lot of good results form computerizing the Process Engineering, Instrumentation Control and Electrical Engineering, Mechanical Engineering, Computer Aided Design and Drafting, and Document Management System, but there remains the problem of information isolation and integration. On this feasibility study, IPIS design support functionality guideline was suggested by evaluating current AECL CAE tools, analyzing computer aided engineering task and work flow, investigating request for implementing integrated computer aided engineering and describing Korean request for future CANDU design including CANDU 9. 6 figs. (Author)

Integrated plant information technology design support functionality

Energy Technology Data Exchange (ETDEWEB)

Kim, Yeon Seung; Kim, Dae Jin [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of); Barber, P W; Goland, D [Atomic Energy Canada Ltd., (Canada)

1996-06-01

This technical report was written as a result of Integrated Plant Information System (IPIS) feasibility study on CANDU 9 project which had been carried out from January, 1994 to March, 1994 at AECL (Atomic Energy Canada Limited) in Canada. From 1987, AECL had done endeavour to change engineering work process from paper based work process to computer based work process through CANDU 3 project. Even though AECL had a lot of good results form computerizing the Process Engineering, Instrumentation Control and Electrical Engineering, Mechanical Engineering, Computer Aided Design and Drafting, and Document Management System, but there remains the problem of information isolation and integration. On this feasibility study, IPIS design support functionality guideline was suggested by evaluating current AECL CAE tools, analyzing computer aided engineering task and work flow, investigating request for implementing integrated computer aided engineering and describing Korean request for future CANDU design including CANDU 9. 6 figs. (Author).

Protein Homeostasis Imposes a Barrier on Functional Integration of Horizontally Transferred Genes in Bacteria.

Science.gov (United States)

Bershtein, Shimon; Serohijos, Adrian W R; Bhattacharyya, Sanchari; Manhart, Michael; Choi, Jeong-Mo; Mu, Wanmeng; Zhou, Jingwen; Shakhnovich, Eugene I

2015-10-01

Horizontal gene transfer (HGT) plays a central role in bacterial evolution, yet the molecular and cellular constraints on functional integration of the foreign genes are poorly understood. Here we performed inter-species replacement of the chromosomal folA gene, encoding an essential metabolic enzyme dihydrofolate reductase (DHFR), with orthologs from 35 other mesophilic bacteria. The orthologous inter-species replacements caused a marked drop (in the range 10-90%) in bacterial growth rate despite the fact that most orthologous DHFRs are as stable as E.coli DHFR at 37°C and are more catalytically active than E. coli DHFR. Although phylogenetic distance between E. coli and orthologous DHFRs as well as their individual molecular properties correlate poorly with growth rates, the product of the intracellular DHFR abundance and catalytic activity (kcat/KM), correlates strongly with growth rates, indicating that the drop in DHFR abundance constitutes the major fitness barrier to HGT. Serial propagation of the orthologous strains for ~600 generations dramatically improved growth rates by largely alleviating the fitness barriers. Whole genome sequencing and global proteome quantification revealed that the evolved strains with the largest fitness improvements have accumulated mutations that inactivated the ATP-dependent Lon protease, causing an increase in the intracellular DHFR abundance. In one case DHFR abundance increased further due to mutations accumulated in folA promoter, but only after the lon inactivating mutations were fixed in the population. Thus, by apparently distinguishing between self and non-self proteins, protein homeostasis imposes an immediate and global barrier to the functional integration of foreign genes by decreasing the intracellular abundance of their products. Once this barrier is alleviated, more fine-tuned evolution occurs to adjust the function/expression of the transferred proteins to the constraints imposed by the intracellular

Protein Homeostasis Imposes a Barrier on Functional Integration of Horizontally Transferred Genes in Bacteria.

Directory of Open Access Journals (Sweden)

Shimon Bershtein

2015-10-01

Full Text Available Horizontal gene transfer (HGT plays a central role in bacterial evolution, yet the molecular and cellular constraints on functional integration of the foreign genes are poorly understood. Here we performed inter-species replacement of the chromosomal folA gene, encoding an essential metabolic enzyme dihydrofolate reductase (DHFR, with orthologs from 35 other mesophilic bacteria. The orthologous inter-species replacements caused a marked drop (in the range 10-90% in bacterial growth rate despite the fact that most orthologous DHFRs are as stable as E.coli DHFR at 37°C and are more catalytically active than E. coli DHFR. Although phylogenetic distance between E. coli and orthologous DHFRs as well as their individual molecular properties correlate poorly with growth rates, the product of the intracellular DHFR abundance and catalytic activity (kcat/KM, correlates strongly with growth rates, indicating that the drop in DHFR abundance constitutes the major fitness barrier to HGT. Serial propagation of the orthologous strains for ~600 generations dramatically improved growth rates by largely alleviating the fitness barriers. Whole genome sequencing and global proteome quantification revealed that the evolved strains with the largest fitness improvements have accumulated mutations that inactivated the ATP-dependent Lon protease, causing an increase in the intracellular DHFR abundance. In one case DHFR abundance increased further due to mutations accumulated in folA promoter, but only after the lon inactivating mutations were fixed in the population. Thus, by apparently distinguishing between self and non-self proteins, protein homeostasis imposes an immediate and global barrier to the functional integration of foreign genes by decreasing the intracellular abundance of their products. Once this barrier is alleviated, more fine-tuned evolution occurs to adjust the function/expression of the transferred proteins to the constraints imposed by the

Integrated Product Team Effectiveness in the Department of Defense

National Research Council Canada - National Science Library

Monk, Gregg

2002-01-01

In 1995, then Secretary of Defense William Perry, directed a 'fundamental change' in the way DoD did business when he endorsed and required the use of the Integrated Product and Process Development (IPPD...

Design of smart functional apparel products for moxa moxibustion

Science.gov (United States)

Li, Li; Au, Wai-man; Ding, Feng; Wong, Kwok-shing

2013-08-01

Moxa Moxibustion is a common traditional Chinese therapy in which burning Moxa is applied to affected body areas. This method has been employed for thousands of years to achieve certain medical objectives, such as pain relief or antibacterial and anti-inflammatory effects. Its therapeutic effectiveness has been demonstrated successfully both in research and clinical studies. However, this traditional approach may cause undesirable side effects, for example: 1) burning of Moxa produces by-products such as smoke and ash; 2) patients are at risk of being burnt; 3) the active ingredients of the Moxa leaf oil are volatile, odorous, unstable in air and easy to dissipate, and difficult to store and transport; 4) it is inconvenient to operate. These side effects limit its further high-potential and high-value applications. This study is aimed at developing a multi-functional smart textile system that will adopt smart fabrics containing encapsulated Moxa oil integrated with thermally conductive materials to replace the conventional Moxa products. This will efficiently deliver the active ingredients of Moxa to a human body at optimum conditions, i.e., in a precise and controllable way, with maximum convenience and a high level of comfort. Doing so would solve the existing problems mentioned above. Both garment design skill and textile technology will be applied to Moxa Moxibustion textile to enhance the aesthetics and functionality. The smart garment performance will be assessed subjectively in a clinical trial and objectively by a number of instrumental methods.

Marichev-Saigo-Maeda fractional integration operators of the Bassel functions

Directory of Open Access Journals (Sweden)

Sunil D. Purohit

2012-05-01

Full Text Available In this paper, we apply generalized operators of fractional integration involving Appell’s function F_3 (. due to Marichev-Saigo-Maeda, to the Bessel function of first kind. The results are expressed in terms of generalized Wright function and hypergeometric functions _pF_q . Special cases involving this function are mentioned. Results given recently by Kilbas and Sebastian follow as special cases of the theorems establish here.

Particle production and Boltzmann integral form of relativistic quantum transport theory

International Nuclear Information System (INIS)

Rafelski, J.; Davis, E.D.; Bialynicki-Birula, I.

1993-01-01

The 3+3+1 dimensional relativistic quantum transport equation for the fermion matter field, combines the particle pair production with flow phenomena, which occur at very different time scale. A direct numerical treatment of dynamical situations is therefore practically impossible. The authors attempt a seperation of these two sectors by the method of prediagonalization of the integral equations. They exploit the structure of the resolvent of the transport equations: it contains two poles corresponding to the flow sector and two to the pair production sector. Their hope for practical applications is to treat matter flow as a classical phenomenon and to be able to obtain an integral term describing the pair production accurately

Integrated preventive maintenance and production decisions for imperfect processes

International Nuclear Information System (INIS)

Nourelfath, Mustapha; Nahas, Nabil; Ben-Daya, Mohamed

2016-01-01

This paper integrates production, maintenance, and quality for an imperfect process in a multi-period multi-product capacitated lot-sizing context. The production system is modeled as an imperfect machine, whose the status is considered to be either in-control or out-of-control. When the machine is out of control, it produces a fraction of nonconforming items. During each period, this machine is inspected and imperfect preventive maintenance activities are simultaneously performed to reduce its age, proportional to the preventive maintenance level. The objective is to minimize the total cost, while satisfying the demand for all products. Our optimization model allows for a joint selection of the optimal values of production plan, and the maintenance policy, while taking into account quality related costs. A solution algorithm is developed and illustrative numerical examples are presented. It is found that the increase in PM level leads to reductions in quality control costs. Furthermore, if the cost of performing PM is high to the point where it is not compensated for by reductions in the quality related costs, then performing PM is not justifiable. Finally, using non-periodic preventive maintenance with the possibility of different preventive maintenance levels may result in an improvement of the total cost. - Highlights: • We integrate production, maintenance, and quality. • We evaluate all the expected costs. • Our model allows for a joint selection of the optimal values. • A solution algorithm is developed. • Increasing PM level will decrease quality control costs.

and chebyshev functions

Directory of Open Access Journals (Sweden)

Mohsen Razzaghi

2000-01-01

Full Text Available A direct method for finding the solution of variational problems using a hybrid function is discussed. The hybrid functions which consist of block-pulse functions plus Chebyshev polynomials are introduced. An operational matrix of integration and the integration of the cross product of two hybrid function vectors are presented and are utilized to reduce a variational problem to the solution of an algebraic equation. Illustrative examples are included to demonstrate the validity and applicability of the technique.

Productive Employment in Romania: A Major Challenge to the Integration into the European Union

Directory of Open Access Journals (Sweden)

Emilia Herman

2016-05-01

Full Text Available It is widely accepted that productive employment represents an essential element of inclusive economic growth, and it can be a driving force in reducing gaps between countries (especially experienced by productivity and income in order for these to integrate into the European Union. The aim of the article is to highlight the process of integration from the perspective of productive employment and its main determinants, in Romania, in the period following accession to the EU and integration into the European economic structures, the 2007-2014 period respectively. The results of this paper highlight a low level of productive employment in Romania determined mainly by low labour productivity, low wages, high vulnerable employment, high and inefficient employment in agriculture and a low level of employment in knowledge-intensive activities. The existence of large gaps, in terms of productive employment and economic development, between Romania and the developed EU countries, as well as the existence of the highest in-work poverty risk in EU emphasizes the need to accelerate productivity growth, which requires a real structural transformation, a shift from low-productivity sectors to high-productivity sectors. However, it is very important that poor workers should significantly benefit from the gains in labour productivity. The findings of this study can be useful for policy makers in order to support the improvement of productive employment so that productive employment contributes efficiently to the real integration of Romania into the EU.

IOCM Aerial Photography: Integrated Ocean and Coastal Mapping Product

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Integrated Ocean and Coastal Mapping Product (IOCM). The images were acquired from a nominal altitude of 7,500 feet above ground level (AGL), using an Applanix...

Functional brain networks underlying detection and integration of disconfirmatory evidence.

Science.gov (United States)

Lavigne, Katie M; Metzak, Paul D; Woodward, Todd S

2015-05-15

Processing evidence that disconfirms a prior interpretation is a fundamental aspect of belief revision, and has clear social and clinical relevance. This complex cognitive process requires (at minimum) an alerting stage and an integration stage, and in the current functional magnetic resonance imaging (fMRI) study, we used multivariate analysis methodology on two datasets in an attempt to separate these sequentially-activated cognitive stages and link them to distinct functional brain networks. Thirty-nine healthy participants completed one of two versions of an evidence integration experiment involving rating two consecutive animal images, both of which consisted of two intact images of animal faces morphed together at different ratios (e.g., 70/30 bird/dolphin followed by 10/90 bird/dolphin). The two versions of the experiment differed primarily in terms of stimulus presentation and timing, which facilitated functional interpretation of brain networks based on differences in the hemodynamic response shapes between versions. The data were analyzed using constrained principal component analysis for fMRI (fMRI-CPCA), which allows distinct, simultaneously active task-based networks to be separated, and these were interpreted using both temporal (task-based hemodynamic response shapes) and spatial (dominant brain regions) information. Three networks showed increased activity during integration of disconfirmatory relative to confirmatory evidence: (1) a network involved in alerting to the requirement to revise an interpretation, identified as the salience network (dorsal anterior cingulate cortex and bilateral insula); (2) a sensorimotor response-related network (pre- and post-central gyri, supplementary motor area, and thalamus); and (3) an integration network involving rostral prefrontal, orbitofrontal and posterior parietal cortex. These three networks were staggered in their peak activity (alerting, responding, then integrating), but at certain time points (e

Product Architecture Modularity Strategies

DEFF Research Database (Denmark)

Mikkola, Juliana Hsuan

2003-01-01

The focus of this paper is to integrate various perspectives on product architecture modularity into a general framework, and also to propose a way to measure the degree of modularization embedded in product architectures. Various trade-offs between modular and integral product architectures...... and how components and interfaces influence the degree of modularization are considered. In order to gain a better understanding of product architecture modularity as a strategy, a theoretical framework and propositions are drawn from various academic literature sources. Based on the literature review......, the following key elements of product architecture are identified: components (standard and new-to-the-firm), interfaces (standardization and specification), degree of coupling, and substitutability. A mathematical function, termed modularization function, is introduced to measure the degree of modularization...

Perspectives in production of functional meat products

Science.gov (United States)

Vasilev, D.; Glišić, M.; Janković, V.; Dimitrijević, M.; Karabasil, N.; Suvajdžić, B.; Teodorović, V.

2017-09-01

The meat industry has met new challenges since the World Health Organization classified processed meat in carcinogenic Group 1. In relation to this, the functional food concept in meat processing has gained importance, especially in reducing carcinogenic N-nitroso compounds and polycyclic aromatic hydrocarbons (PAHs) as an additional imperative, apart from the usual fat and salt reduction and product enrichment with functional ingredients. PAH reduction relies on control of the smoking process, but there is also a possibility they could be degraded by means of probiotic microorganisms or spices. The reduction of N-nitroso compounds could be provided by lowering the amount of added nitrite/nitrate, using substitutes for these chemicals, and/or by preventing conditions for the creation of N-nitroso compounds. Nevertheless, fat and salt reductions still remain topical, and rely mostly on the use of functional ingredients as their substitutes.

Design and operation of a continuous integrated monoclonal antibody production process.

Science.gov (United States)

Steinebach, Fabian; Ulmer, Nicole; Wolf, Moritz; Decker, Lara; Schneider, Veronika; Wälchli, Ruben; Karst, Daniel; Souquet, Jonathan; Morbidelli, Massimo

2017-09-01

The realization of an end-to-end integrated continuous lab-scale process for monoclonal antibody manufacturing is described. For this, a continuous cultivation with filter-based cell-retention, a continuous two column capture process, a virus inactivation step, a semi-continuous polishing step (twin-column MCSGP), and a batch-wise flow-through polishing step were integrated and operated together. In each unit, the implementation of internal recycle loops allows to improve the performance: (a) in the bioreactor, to simultaneously increase the cell density and volumetric productivity, (b) in the capture process, to achieve improved capacity utilization at high productivity and yield, and (c) in the MCSGP process, to overcome the purity-yield trade-off of classical batch-wise bind-elute polishing steps. Furthermore, the design principles, which allow the direct connection of these steps, some at steady state and some at cyclic steady state, as well as straight-through processing, are discussed. The setup was operated for the continuous production of a commercial monoclonal antibody, resulting in stable operation and uniform product quality over the 17 cycles of the end-to-end integration. The steady-state operation was fully characterized by analyzing at the outlet of each unit at steady state the product titer as well as the process (HCP, DNA, leached Protein A) and product (aggregates, fragments) related impurities. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:1303-1313, 2017. © 2017 American Institute of Chemical Engineers.

On set-valued functionals: Multivariate risk measures and Aumann integrals

Science.gov (United States)

Ararat, Cagin

In this dissertation, multivariate risk measures for random vectors and Aumann integrals of set-valued functions are studied. Both are set-valued functionals with values in a complete lattice of subsets of Rm. Multivariate risk measures are considered in a general d-asset financial market with trading opportunities in discrete time. Specifically, the following features of the market are incorporated in the evaluation of multivariate risk: convex transaction costs modeled by solvency regions, intermediate trading constraints modeled by convex random sets, and the requirement of liquidation into the first m ≤ d of the assets. It is assumed that the investor has a "pure" multivariate risk measure R on the space of m-dimensional random vectors which represents her risk attitude towards the assets but does not take into account the frictions of the market. Then, the investor with a d-dimensional position minimizes the set-valued functional R over all m-dimensional positions that she can reach by trading in the market subject to the frictions described above. The resulting functional Rmar on the space of d-dimensional random vectors is another multivariate risk measure, called the market-extension of R. A dual representation for R mar that decomposes the effects of R and the frictions of the market is proved. Next, multivariate risk measures are studied in a utility-based framework. It is assumed that the investor has a complete risk preference towards each individual asset, which can be represented by a von Neumann-Morgenstern utility function. Then, an incomplete preference is considered for multivariate positions which is represented by the vector of the individual utility functions. Under this structure, multivariate shortfall and divergence risk measures are defined as the optimal values of set minimization problems. The dual relationship between the two classes of multivariate risk measures is constructed via a recent Lagrange duality for set optimization. In

Computer Aided Product Service Systems Design : Service CAD and Its integration with Life Cycle Simulation

NARCIS (Netherlands)

Komoto, H.

2009-01-01

Integration of product design into service design, or vice versa, is considered to bring more efficient and effective value addition. Besides EcoDesign tools and methods, a methodology to design such an integration of products and services from a systemic perspective, or product-service systems

Approximation of the exponential integral (well function) using sampling methods

Science.gov (United States)

Baalousha, Husam Musa

2015-04-01

Exponential integral (also known as well function) is often used in hydrogeology to solve Theis and Hantush equations. Many methods have been developed to approximate the exponential integral. Most of these methods are based on numerical approximations and are valid for a certain range of the argument value. This paper presents a new approach to approximate the exponential integral. The new approach is based on sampling methods. Three different sampling methods; Latin Hypercube Sampling (LHS), Orthogonal Array (OA), and Orthogonal Array-based Latin Hypercube (OA-LH) have been used to approximate the function. Different argument values, covering a wide range, have been used. The results of sampling methods were compared with results obtained by Mathematica software, which was used as a benchmark. All three sampling methods converge to the result obtained by Mathematica, at different rates. It was found that the orthogonal array (OA) method has the fastest convergence rate compared with LHS and OA-LH. The root mean square error RMSE of OA was in the order of 1E-08. This method can be used with any argument value, and can be used to solve other integrals in hydrogeology such as the leaky aquifer integral.

Integrated microbial processes for biofuels and high value-added products: the way to improve the cost effectiveness of biofuel production.

Science.gov (United States)

da Silva, Teresa Lopes; Gouveia, Luísa; Reis, Alberto

2014-02-01

The production of microbial biofuels is currently under investigation, as they are alternative sources to fossil fuels, which are diminishing and their use has a negative impact on the environment. However, so far, biofuels derived from microbes are not economically competitive. One way to overcome this bottleneck is the use of microorganisms to transform substrates into biofuels and high value-added products, and simultaneously taking advantage of the various microbial biomass components to produce other products of interest, as an integrated process. In this way, it is possible to maximize the economic value of the whole process, with the desired reduction of the waste streams produced. It is expected that this integrated system makes the biofuel production economically sustainable and competitive in the near future. This review describes the investigation on integrated microbial processes (based on bacteria, yeast, and microalgal cultivations) that have been experimentally developed, highlighting the importance of this approach as a way to optimize microbial biofuel production process.

Yang-Mills correlation functions from integrable spin chains

International Nuclear Information System (INIS)

Roiban, Radu; Volovich, Anastasia

2004-01-01

The relation between the dilatation operator of N = 4 Yang-Mills theory and integrable spin chains makes it possible to compute the one-loop anomalous dimensions of all operators in the theory. In this paper we show how to apply the technology of integrable spin chains to the calculation of Yang-Mills correlation functions by expressing them in terms of matrix elements of spin operators on the corresponding spin chain. We illustrate this method with several examples in the SU(2) sector described by the XXX 1/2 chain. (author)

Space shuttle operations integration plan

Science.gov (United States)

1975-01-01

The Operations Integration Plan is presented, which is to provide functional definition of the activities necessary to develop and integrate shuttle operating plans and facilities to support flight, flight control, and operations. It identifies the major tasks, the organizations responsible, their interrelationships, the sequence of activities and interfaces, and the resultant products related to operations integration.

Interstitial integrals in the multiple-scattering model

International Nuclear Information System (INIS)

Swanson, J.R.; Dill, D.

1982-01-01

We present an efficient method for the evaluation of integrals involving multiple-scattering wave functions over the interstitial region. Transformation of the multicenter interstitial wave functions to a single center representation followed by a geometric projection reduces the integrals to products of analytic angular integrals and numerical radial integrals. The projection function, which has the value 1 in the interstitial region and 0 elsewhere, has a closed-form partial-wave expansion. The method is tested by comparing its results with exact normalization and dipole integrals; the differences are 2% at worst and typically less than 1%. By providing an efficient means of calculating Coulomb integrals, the method allows treatment of electron correlations using a multiple scattering basis set

Directions of Development of International Production Specialization Theory in Terms of Integration

Directory of Open Access Journals (Sweden)

Lidiya Aleksandrovna Pankova

2016-06-01

Full Text Available The article is devoted to the definition of directions of development of the theory of international production specialization in terms of integration based on new trends in various areas of international business. The author proposes a new concept of international industrial specialization in terms of integration. As a result of research the author came to the conclusion that in the current economic conditions the need for a free market constraints associated with the deepening global market failures is becoming more and more obvious. Therefore, in the process of international specialization of production in the conditions of integration of the country should be guided not by comparative advantage in the production of certain goods or services, but also by other criteria. These criteria are: financial criterion determining the financial situation in the country, the trade criterion, reflecting the possibility of benefiting from international trade, technological criterion, considering the technological security of the country in the field of specialization and the cyclical criterion, reflecting the situation in the world economy and the level of integration of the country. On the basis of these criteria, the author identifies three categories of countries according to their ability to benefit from an international industrial specialization in the integration process: effective export, export-neutral and export-inefficient countries.

Methods for integrating a functional component into a microfluidic device

Science.gov (United States)

Simmons, Blake; Domeier, Linda; Woo, Noble; Shepodd, Timothy; Renzi, Ronald F.

2014-08-19

Injection molding is used to form microfluidic devices with integrated functional components. One or more functional components are placed in a mold cavity, which is then closed. Molten thermoplastic resin is injected into the mold and then cooled, thereby forming a solid substrate including the functional component(s). The solid substrate including the functional component(s) is then bonded to a second substrate, which may include microchannels or other features.

Exergy analysis of a combined heat and power plant with integrated lignocellulosic ethanol production

DEFF Research Database (Denmark)

Lythcke-Jørgensen, Christoffer Ernst; Haglind, Fredrik; Clausen, Lasse Røngaard

2013-01-01

produces ethanol, solid biofuel, molasses, and is able to produce district heating hot water. Considering all products equally valuable, the exergy efficiency of the ethanol facility was found to be 0.790 during integrated operation with zero district heating production, and 0.852 during integrated...

Design Features of Product-Integrated PV : An Evaluation of Various Factors under Indoor Irradiance Conditions

NARCIS (Netherlands)

Apostolou, G.

2016-01-01

This thesis explores the field of product-integrated photovoltaics (PIPV), a term which is used for all types of products that contain solar cells in one or more of their surfaces, aiming at providing power during the product’s use. Product-integrated photovoltaics (PIPV) began to be widely

Integrated micro/nanoengineered functional biomaterials for cell mechanics and mechanobiology: a materials perspective.

Science.gov (United States)

Shao, Yue; Fu, Jianping

2014-03-12

The rapid development of micro/nanoengineered functional biomaterials in the last two decades has empowered materials scientists and bioengineers to precisely control different aspects of the in vitro cell microenvironment. Following a philosophy of reductionism, many studies using synthetic functional biomaterials have revealed instructive roles of individual extracellular biophysical and biochemical cues in regulating cellular behaviors. Development of integrated micro/nanoengineered functional biomaterials to study complex and emergent biological phenomena has also thrived rapidly in recent years, revealing adaptive and integrated cellular behaviors closely relevant to human physiological and pathological conditions. Working at the interface between materials science and engineering, biology, and medicine, we are now at the beginning of a great exploration using micro/nanoengineered functional biomaterials for both fundamental biology study and clinical and biomedical applications such as regenerative medicine and drug screening. In this review, an overview of state of the art micro/nanoengineered functional biomaterials that can control precisely individual aspects of cell-microenvironment interactions is presented and they are highlighted them as well-controlled platforms for mechanistic studies of mechano-sensitive and -responsive cellular behaviors and integrative biology research. The recent exciting trend where micro/nanoengineered biomaterials are integrated into miniaturized biological and biomimetic systems for dynamic multiparametric microenvironmental control of emergent and integrated cellular behaviors is also discussed. The impact of integrated micro/nanoengineered functional biomaterials for future in vitro studies of regenerative medicine, cell biology, as well as human development and disease models are discussed. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

OPTIMAL MODEL OF FUNCTIONING OF OLERICULTURE: VERTICAL INTEGRATION, AGRICULTURAL FILIERES, CLUSTERS

Directory of Open Access Journals (Sweden)

Y. B. Mindlin

2016-01-01

Full Text Available The goal of the present paper is to identify the optimal strategy of development of the Russian olericulture in order to substitute imported products and to build up logistic and transport infrastructure. Existing problems of the Russian olericulture are described. It is demonstrated that these problems can be solved on the basis of big integrated structures. Formation of these structures can be based on hierarchical (vertical  integration or networking (agricultural filieres or clusters models. A comparative analysis of these models of development of olericulture is made. Advantages and inconveniences of each model are described. It is demonstrated that sustainable development of the Russian olericulture can be insured only by a combination of hierarchical and networking tools. Vertical integration will help to reach quick increase of production, while networking models are necessary for inclusion of small producers into production chains, development of product range and development of supporting industries. Networking models are also necessary for social tasks. It means that the optimal strategy of development of the  Russian olericulture should be based on a combination of networking and hierarchical tools. This combination is necessary for agricultural corporation as well as for the Russian olericulture in general.

Conformal four point functions and the operator product expansion

International Nuclear Information System (INIS)

Dolan, F.A.; Osborn, H.

2001-01-01

Various aspects of the four point function for scalar fields in conformally invariant theories are analysed. This depends on an arbitrary function of two conformal invariants u,v. A recurrence relation for the function corresponding to the contribution of an arbitrary spin field in the operator product expansion to the four point function is derived. This is solved explicitly in two and four dimensions in terms of ordinary hypergeometric functions of variables z,x which are simply related to u,v. The operator product expansion analysis is applied to the explicit expressions for the four point function found for free scalar, fermion and vector field theories in four dimensions. The results for four point functions obtained by using the AdS/CFT correspondence are also analysed in terms of functions related to those appearing in the operator product discussion

Tensor products of Uq′sl-caret(2)-modules and the big q2-Jacobi function transform

International Nuclear Information System (INIS)

Gade, R. M.

2013-01-01

Four tensor products of evaluation modules of the quantum affine algebra U q ′ sl-caret(2) obtained from the negative and positive series, the complementary and the strange series representations are investigated. Linear operators R(z) satisfying the intertwining property on finite linear combinations of the canonical basis elements of the tensor products are described in terms of two sets of infinite sums {τ (r,t) } r,t∈Z ≥0 and {τ (r,t) } r,t∈Z ≥0 involving big q 2 -Jacobi functions or related nonterminating basic hypergeometric series. Inhomogeneous recurrence relations can be derived for both sets. Evaluations of the simplest sums provide the corresponding initial conditions. For the first set of sums the relations entail a big q 2 -Jacobi function transform pair. An integral decomposition is obtained for the sum τ (r,t) . A partial description of the relation between the decompositions of the tensor products with respect to U q sl(2) or with respect to its complement in U q ′ sl-caret(2) can be formulated in terms of Askey-Wilson function transforms. For a particular combination of two tensor products, the occurrence of proper U q ′ sl-caret(2)-submodules is discussed.

Existence Results for Some Nonlinear Functional-Integral Equations in Banach Algebra with Applications

Directory of Open Access Journals (Sweden)

Lakshmi Narayan Mishra

2016-04-01

Full Text Available In the present manuscript, we prove some results concerning the existence of solutions for some nonlinear functional-integral equations which contains various integral and functional equations that considered in nonlinear analysis and its applications. By utilizing the techniques of noncompactness measures, we operate the fixed point theorems such as Darbo's theorem in Banach algebra concerning the estimate on the solutions. The results obtained in this paper extend and improve essentially some known results in the recent literature. We also provide an example of nonlinear functional-integral equation to show the ability of our main result.

A novel integral representation for the Adler function

International Nuclear Information System (INIS)

Nesterenko, A V; Papavassiliou, J

2006-01-01

New integral representations for the Adler D-function and the R-ratio of the electron-positron annihilation into hadrons are derived in the general framework of the analytic approach to QCD. These representations capture the nonperturbative information encoded in the dispersion relation for the D-function, the effects due to the interrelation between spacelike and timelike domains, and the effects due to the nonvanishing pion mass. The latter plays a crucial role in this analysis, forcing the Adler function to vanish in the infrared limit. Within the developed approach the D-function is calculated by employing its perturbative approximation as the only additional input. The obtained result is found to be in reasonable agreement with the experimental prediction for the Adler function in the entire range of momenta 0 ≤ Q 2 < ∞

76 FR 41521 - In the Matter of Certain Integrated Circuits, Chipsets, and Products Containing Same Including...

Science.gov (United States)

2011-07-14

... INTERNATIONAL TRADE COMMISSION [Inv. No. 337-TA-786] In the Matter of Certain Integrated Circuits... sale within the United States after importation of certain integrated circuits, chipsets, and products... after importation of certain integrated circuits, chipsets, and products containing same including...

75 FR 5804 - In the Matter of: Certain Semiconductor Integrated Circuits and Products Containing Same; Notice...

Science.gov (United States)

2010-02-04

... Semiconductor Integrated Circuits and Products Containing Same; Notice of Commission Determination To Review in... importation of certain semiconductor integrated circuits and products containing same by reason of... (collectively ``Seagate''). Qimonda accuses of infringement certain LSI integrated circuits, as well as certain...

Nuclear data for production of the therapeutic radionuclides {sup 32}P, {sup 64}Cu, {sup 67}Cu, {sup 89}Sr, {sup 9}Y and {sup 153}Sm via the (n,p) reaction: Evaluation of excitation function and its validation via integral cross-section measurement using a 14 MeV d(Be) neutron source

Energy Technology Data Exchange (ETDEWEB)

Al-Abyad, M. [Institut fuer Nuklearchemie, Forschungszentrum Juelich GmbH, D-52425 Juelich (Germany); Cyclotron Facility, Nuclear Research Center, Atomic Energy Authority, Cairo 13759 (Egypt); Spahn, I. [Institut fuer Nuklearchemie, Forschungszentrum Juelich GmbH, D-52425 Juelich (Germany); Institute of Experimental Physics, University of Debrecen, H-4010 Debrecen (Hungary); Sudar, S. [Institut fuer Nuklearchemie, Forschungszentrum Juelich GmbH, D-52425 Juelich (Germany); Institute of Experimental Physics, University of Debrecen, H-4010 Debrecen (Hungary); Morsy, M. [Cyclotron Facility, Nuclear Research Center, Atomic Energy Authority, Cairo 13759 (Egypt); Comsan, M.N.H. [Cyclotron Facility, Nuclear Research Center, Atomic Energy Authority, Cairo 13759 (Egypt); Csikai, J. [Institute of Experimental Physics, University of Debrecen, H-4010 Debrecen (Hungary); Qaim, S.M. [Institut fuer Nuklearchemie, Forschungszentrum Juelich GmbH, D-52425 Juelich (Germany)]. E-mail: s.m.qaim@fz-juelich.de; Coenen, H.H. [Institut fuer Nuklearchemie, Forschungszentrum Juelich GmbH, D-52425 Juelich (Germany)

2006-06-15

Nuclear data for production of the therapeutic radionuclides {sup 32}P, {sup 64}Cu, {sup 67}Cu, {sup 89}Sr, {sup 9}Y and {sup 153}Sm via (n,p) reactions on the target nuclei {sup 32}S, {sup 64}Zn, {sup 67}Zn, {sup 89}Y, {sup 9}Zr and {sup 153}Eu, respectively, are discussed. The available information on each excitation function was analysed. From the recommended data set for each reaction the average integrated cross section for a standard 14 MeV d(Be) neutron field was deduced. The spectrum-averaged cross section was also measured experimentally. A comparison of the integrated value with the integral measurement served to validate the excitation function within about 15%. A fast neutron source appears to be much more effective than a fission reactor for production of the above-mentioned radionuclides in a no-carrier-added form via the (n,p) process. In particular, the possibility of production of high specific activity {sup 153}Sm is discussed.

The significance and possibility of functional food production

Directory of Open Access Journals (Sweden)

Dimitrijević-Branković Suzana I.

2002-01-01

Full Text Available Abundant knowledge of the significance of food quality for all human living functions as well as growing human population and the occurrence of world "hidden hunger", directed food producers toward new production processes of and new product development that must satisfy the specific needs of different categories of consumers. The differences are reflected in sex age, religious affiliation, activity, health, social status etc. "Organic", "natural, minimal processing, functional (and often called "therapeutical" food nowadays represents the key interest of nutritionists, physicians and food producers. Such food should have a beneficial influence on human health, besides satisfying the nutritive and energetic necessities, by protective, prophylactic and healing performance. This paper discusses facts about the influence of food on human health, problems of malnutrition in developing and developed countries, presents states of food production in the world and in Yugoslavia, legislation and regulations on nourishment and food production, the disadvantages of former concepts of development of this production and possible directions of future trends with a particular review on functional food production.

The key to successful management of STS operations: An integrated production planning system

Science.gov (United States)

Johnson, W. A.; Thomasen, C. T.

1985-01-01

Space Transportation System operations managers are being confronted with a unique set of challenges as a result of increasing flight rates, the demand for flight manifest/production schedule flexibility and an emphasis on continued cost reduction. These challenges have created the need for an integrated production planning system that provides managers with the capability to plan, schedule, status and account for an orderly flow of products and services across a large, multi-discipline organization. With increased visibility into the end-to-end production flow for individual and parallel missions in process, managers can assess the integrated impact of changes, identify and measure the interrelationships of resource, schedule, and technical performance requirements and prioritize productivity enhancements.

O2O - Based Agricultural Products Supply Chain Process Integration Optimization Based on Internet +

Directory of Open Access Journals (Sweden)

Li Huijuan

2017-01-01

Full Text Available Traditional wholesale and retail, electricity supplier of agricultural products supply chain have many difficulties. The O2O supply chain of agricultural products of “Internet+”, committed to the integration of online and offline advantage process, has become the main direction of the agricultural products supply chain transformation. Practice operation results show that O2O supply chain can effectively play the advantages of online and offline process integration, but its further development is still subject to the logistics, information flow of the dispersion, fracture and high cost. The integrated optimization of various regions and various enterprises and all sectors of the supply chain process is the key to optimize the process Internet plus era of agricultural products supply chain.

Functional-integral formulations for plasma instabilities and turbulence; analogies with phase-transition phenomena

International Nuclear Information System (INIS)

Arnold, R.C.

1977-06-01

The formalism of Martin, Siggia and Rose is utilized to write a functional-integral representation for generating functionals in plasma transport theory, following Nakayama and Dawson. Parallel treatments of Navier-Stokes turbulence (attempted by Rosen) and of critical dynamics, by Kawasaki, are compared to illustrate the application of common field-theory techniques, such as the effective action. Quasi-classical methods for functional integrals are discussed

One-loop tensor Feynman integral reduction with signed minors

DEFF Research Database (Denmark)

Fleischer, Jochem; Riemann, Tord; Yundin, Valery

2012-01-01

of the formalism is the immediate evaluation of complete contractions of the tensor integrals with external momenta. This leads to the problem of evaluating sums over products of signed minors with scalar products of chords. Chords are differences of external momenta. These sums may be evaluated analytically......We present an algebraic approach to one-loop tensor integral reduction. The integrals are presented in terms of scalar one- to four-point functions. The reduction is worked out explicitly until five-point functions of rank five. The numerical C++ package PJFry evaluates tensor coefficients in terms...

Integrating enzyme fermentation in lignocellulosic ethanol production: life-cycle assessment and techno-economic analysis.

Science.gov (United States)

Olofsson, Johanna; Barta, Zsolt; Börjesson, Pål; Wallberg, Ola

2017-01-01

Cellulase enzymes have been reported to contribute with a significant share of the total costs and greenhouse gas emissions of lignocellulosic ethanol production today. A potential future alternative to purchasing enzymes from an off-site manufacturer is to integrate enzyme and ethanol production, using microorganisms and part of the lignocellulosic material as feedstock for enzymes. This study modelled two such integrated process designs for ethanol from logging residues from spruce production, and compared it to an off-site case based on existing data regarding purchased enzymes. Greenhouse gas emissions and primary energy balances were studied in a life-cycle assessment, and cost performance in a techno-economic analysis. The base case scenario suggests that greenhouse gas emissions per MJ of ethanol could be significantly lower in the integrated cases than in the off-site case. However, the difference between the integrated and off-site cases is reduced with alternative assumptions regarding enzyme dosage and the environmental impact of the purchased enzymes. The comparison of primary energy balances did not show any significant difference between the cases. The minimum ethanol selling price, to reach break-even costs, was from 0.568 to 0.622 EUR L -1 for the integrated cases, as compared to 0.581 EUR L -1 for the off-site case. An integrated process design could reduce greenhouse gas emissions from lignocellulose-based ethanol production, and the cost of an integrated process could be comparable to purchasing enzymes produced off-site. This study focused on the environmental and economic assessment of an integrated process, and in order to strengthen the comparison to the off-site case, more detailed and updated data regarding industrial off-site enzyme production are especially important.

The exact $C$-function in integrable $\\lambda$-deformed theories arXiv

CERN Document Server

Georgiou, George; Sagkrioti, Eftychia; Sfetsos, Konstantinos; Siampos, Konstantinos

By employing CFT techniques, we show how to compute in the context of \\lambda-deformations of current algebras and coset CFTs the exact in the deformation parameters C-function for a wide class of integrable theories that interpolate between a UV and an IR point. We explicitly consider RG flows for integrable deformations of left-right asymmetric current algebras and coset CFTs. In all cases, the derived exact C-functions obey all the properties asserted by Zamolodchikov's c-theorem in two-dimensions.

Integration of functional complex oxide nanomaterials on silicon

Directory of Open Access Journals (Sweden)

Jose Manuel eVila-Fungueiriño

2015-06-01

Full Text Available The combination of standard wafer-scale semiconductor processing with the properties of functional oxides opens up to innovative and more efficient devices with high value applications that can be produced at large scale. This review uncovers the main strategies that are successfully used to monolithically integrate functional complex oxide thin films and nanostructures on silicon: the chemical solution deposition approach (CSD and the advanced physical vapor deposition techniques such as oxide molecular beam epitaxy (MBE. Special emphasis will be placed on complex oxide nanostructures epitaxially grown on silicon using the combination of CSD and MBE. Several examples will be exposed, with a particular stress on the control of interfaces and crystallization mechanisms on epitaxial perovskite oxide thin films, nanostructured quartz thin films, and octahedral molecular sieve nanowires. This review enlightens on the potential of complex oxide nanostructures and the combination of both chemical and physical elaboration techniques for novel oxide-based integrated devices.

Utilization of Natural Products as Functional Feed

Directory of Open Access Journals (Sweden)

Stella Magdalena

2013-03-01

Full Text Available The use of antibiotics as feed additive improves performance in livestock. However, scientific data related to the use of antibiotics in feed merge spreading of bacterial resistance in animal and human bodies, therefore the usage of antibiotics in animal production is restricted. This condition raise the utilization of natural antibiotic as functional feed such as phytogenics (essential oil, flavonoid, saponin, and tannin, enzyme, probiotic, and prebiotic to improve the livestock’s performance, quality, and health. Functional feeds increase profitability in animal husbandry production and its use is feeds are expected to be functional foods that may have positive effects in human nutrition.

Ingredient Functionality in Multilayered Dough-margarine Systems and the Resultant Pastry Products: A Review.

Science.gov (United States)

Ooms, Nand; Pareyt, Bram; Brijs, Kristof; Delcour, Jan A

2016-10-02

Pastry products are produced from heterogeneous multilayered dough systems. The main ingredients are flour, water, fat and sugar for puff pastry, and the same plus yeast for fermented pastry. Key aspects in pastry production are (i) building laminated dough containing alternating layers of dough and bakery fat and (ii) maintaining this multilayered structure during processing to allow for steam entrapment for proper dough lift during baking. Although most authors agree on the importance of gluten and fat for maintaining the integrity of the different layers, detailed studies on their specific function are lacking. The exact mechanism of steam entrapment during dough lift and the relative contribution of water set free from the fat phase during baking also remain unclear. This review brings together current knowledge on pastry products and the factors determining (intermediate) product quality. Its focus is on flour constituents, fat, water, and (where applicable) yeast during the different production stages of pastry products. Future research needs are addressed as the knowledge on biochemical and physical changes occurring in flour constituents and other ingredients during pastry production and their effect on product quality is currently inadequate.

Stereoscopic image production: live, CGI, and integration

Science.gov (United States)

Criado, Enrique

2006-02-01

This paper shortly describes part of the experience gathered in more than 10 years of stereoscopic movie production, some of the most common problems found and the solutions, with more or less fortune, we applied to solve those problems. Our work is mainly focused in the entertainment market, theme parks, museums, and other cultural related locations and events. In our movies, we have been forced to develop our own devices to permit correct stereo shooting (stereoscopic rigs) or stereo monitoring (real-time), and to solve problems found with conventional film editing, compositing and postproduction software. Here, we discuss stereo lighting, monitoring, special effects, image integration (using dummies and more), stereo-camera parameters, and other general 3-D movie production aspects.

Integration of decentralized electricity production

International Nuclear Information System (INIS)

Tomekova, A.

2004-01-01

The project SustelNet also deals with the possibilities of future development of DG sources. Within the project frame a quite general concept of the so-called 'equal field' for centralized and decentralized production was chosen for the better integration of DG. Its aim was to the achieve demanded level on the market in the future term (by 2020). Looking at the problem in the wider context means, that both forms of the production should be admitted on the market on the same conditions. The result of this project is a regulatory map, which actually serves as a definite regulatory strategy for more effective employment of DG sources. On the basis of the national regulatory strategies a proposition of regulatory map for EU will be launched, including some recommendations for European Commission. A few expert papers (scenario of proceeding, benchmarking, economical tools and criteria) are also output of this project. Five member states of the EU and four entering countries have been involved in this project. The final results of this procedure will be presented from April 2004 on international and national conferences, seminaries, or by means of other ways of publicity

Computer integration of engineering design and production: A national opportunity

Science.gov (United States)

1984-01-01

The National Aeronautics and Space Administration (NASA), as a purchaser of a variety of manufactured products, including complex space vehicles and systems, clearly has a stake in the advantages of computer-integrated manufacturing (CIM). Two major NASA objectives are to launch a Manned Space Station by 1992 with a budget of $8 billion, and to be a leader in the development and application of productivity-enhancing technology. At the request of NASA, a National Research Council committee visited five companies that have been leaders in using CIM. Based on these case studies, technical, organizational, and financial issues that influence computer integration are described, guidelines for its implementation in industry are offered, and the use of CIM to manage the space station program is recommended.

Integral definition of the logarithmic function and the derivative of the exponential function in calculus

Science.gov (United States)

Vaninsky, Alexander

2015-04-01

Defining the logarithmic function as a definite integral with a variable upper limit, an approach used by some popular calculus textbooks, is problematic. We discuss the disadvantages of such a definition and provide a way to fix the problem. We also consider a definition-based, rigorous derivation of the derivative of the exponential function that is easier, more intuitive, and complies with the standard definitions of the number e, the logarithmic, and the exponential functions.

Active and passive silica waveguide integration

DEFF Research Database (Denmark)

Hübner, Jörg; Guldberg-Kjær, Søren Andreas

2001-01-01

. The increasing complexity and functionality of optical networks prompts a demand for highly integrated optical circuits. On-board optical amplifiers, monolithically integrated with functionalities like switching or multiplexing/demultiplexing will allow flexible incorporation of optical integrated circuits...... in existing and future networks without affecting the power budget of the system. Silica on silicon technology offers a unique possibility to selectively dope sections of the integrated circuit with erbium where amplification is desired. Some techniques for active/passive integration are reviewed and a silica......Integrated optical amplifiers are currently regaining interest. Stand-alone single integrated amplifiers offer only limited advantage over current erbium doped fiber amplifiers, whereas arrays of integrated amplifiers are very attractive due to miniaturization and the possibility of mass production...

Age as a factor in sensory integration function in Taiwanese children

Directory of Open Access Journals (Sweden)

Lin CK

2013-07-01

Full Text Available Chin-Kai Lin,1 Huey-Min Wu,2 Hsin-Yi Wang,3 Mei-Hui Tseng,4,5 Chung-Hui Lin61Department of Early Childhood Education, National Taichung University of Education, Taichung, Taiwan; 2Research Center for Testing and Assessment, National Academy for Educational Research, New Taipei, Taiwan; 3Department of Special Education, National Taichung University of Education, Taichung, Taiwan; 4School of Occupational Therapy, College of Medicine, National Taiwan University, Taipei, Taiwan; 5Department of Physical Medicine and Rehabilitation, National Taiwan University Hospital, Taipei, Taiwan; 6School of Occupational Therapy, College of Medical Science and Technology, Chung Shan Medical University, Taichung, TaiwanObjective: Sensory integration progresses along a normal developmental sequence. However, few studies have explored how age difference affects the way sensory integration functions in Taiwanese children as they develop. Therefore, this study aims to pinpoint the role of age in sensory integration.Method: A purposive sampling plan was employed. The study population comprised 1,000 Chinese children aged 36 to 131 months (mean = 74.48 months, standard deviation = 25.69 months. Subjects were scored on seven subsets of the Test of Sensory Integration Function (TSIF. An analysis of variance (ANOVA was used to identify differences between four age groups (ages 3−4, 5−6, 7−8, and 9−10 years, in the categories of the TSIF.Results: ANOVA revealed that age is a significant factor in each of the seven tasks of sensory integration associated with various stages of development. The effect of age was significant in all four groups for the subscale of Bilateral Integration Sequences. The function of sensory integration for the children aged 5−8 years did not produce statistically significant results for the subscale of Postural Movement, Sensory Discrimination, Sensory Seeking, or Attention and Activity. For the subscale of Sensory Modulation and Emotional

Integrals of the motion, Green functions, and coherent states of dynamical systems

International Nuclear Information System (INIS)

Dodonov, V.V.; Malkin, I.A.; Man'ko, V.I.

1975-01-01

The connection between the integrals of the motion of a quantum system and its Green function is established. The Green function is shown to be the eigenfunction of the integrals of the motion which describe initial points of the system trajectory in the phase space of average coordinates and moments. The explicit expressions for the Green functions of the N-dimensional system with the Hamiltonians which is the most general quadratic form of coordinates and momenta with time-dependent coefficients is obtained in coordinate, momentum, and coherent states representations. The Green functions of the nonstationary singular oscillator and of the stationary Schroedinger equation are also obtained. (author)

Environmental Sustainability Assessment of Integrated Food and Bioenergy Production with Case Studies from Ghana

DEFF Research Database (Denmark)

Kamp, Andreas

technologies appear relatively more attractive. Fruit and cocoa residue‐based biogas production in a fruit processing facility, with return of compost to pineapple farmers also proved to be a viable technology. It is recommended that relevant stakeholders explore the implementation of biogas and nutrient......The use of agricultural residues for the production of bioenergy offers tantalising prospects of reduced pollution and greater food sovereignty. Integrated food and bioenergy systems seek to optimise the joint production of food and energy. Integrated food and bioenergy systems may be evaluated...... and compared with other food and energy systems using Environmental Sustainability Assessment (ESA). This thesis investigates a range of integrated food and residuebased bioenergy production systems and provide methodological developments that are relevant for the assessment of such systems. The methodological...

Unified Information Access in Product Creation with an Integrated Control Desk

Science.gov (United States)

Wrasse, Kevin; Diener, Holger; Hayka, Haygazun; Stark, Rainer

2017-06-01

Customers demand for individualized products leads to a large variety of different products in small series and single-unit production. A high flexibility pressure in product creation is one result of this trend. In order to counteract the pressure, the information steadily increasing by Industry 4.0 must be made available at the workplace. Additionally, a better exchange of information between product development, production planning and production is necessary. The improvement of individual systems, like CAD, PDM, ERP and MES, can only achieve this to a limited extent. Since they mostly use systems from different manufacturers, the necessary deeper integration of information is only feasible for SMEs to a limited extend. The presented control desk helps to ensure a more flexible product creation as well as information exchange. It captures information from different IT systems in the production process and presents them integrated, task-oriented and oriented to the user’s mental model, e.g. information of the production combined with the 3D model of product parts, or information about product development on the 3D model of the production. The solution is a digital 3D model of the manufacturing environment, which is enriched by billboards for a quick information overview and web service windows to access detailed MES and PDM information. By this, the level of abstraction can be reduced and reacts to changed requirements in the short term, making informed decisions. The interaction with the control stands utilizes the touch skills of mobile and fixed systems such as smartphones, tablets and multitouch tables.

O2O - Based Agricultural Products Supply Chain Process Integration Optimization Based on Internet +

OpenAIRE

Li Huijuan

2017-01-01

Traditional wholesale and retail, electricity supplier of agricultural products supply chain have many difficulties. The O2O supply chain of agricultural products of “Internet+”, committed to the integration of online and offline advantage process, has become the main direction of the agricultural products supply chain transformation. Practice operation results show that O2O supply chain can effectively play the advantages of online and offline process integration, but its further development...

Solar Energy Grid Integration Systems (SEGIS): adding functionality while maintaining reliability and economics

Science.gov (United States)

Bower, Ward

2011-09-01

An overview of the activities and progress made during the US DOE Solar Energy Grid Integration Systems (SEGIS) solicitation, while maintaining reliability and economics is provided. The SEGIS R&D opened pathways for interconnecting PV systems to intelligent utility grids and micro-grids of the future. In addition to new capabilities are "value added" features. The new hardware designs resulted in smaller, less material-intensive products that are being viewed by utilities as enabling dispatchable generation and not just unpredictable negative loads. The technical solutions enable "advanced integrated system" concepts and "smart grid" processes to move forward in a faster and focused manner. The advanced integrated inverters/controllers can now incorporate energy management functionality, intelligent electrical grid support features and a multiplicity of communication technologies. Portals for energy flow and two-way communications have been implemented. SEGIS hardware was developed for the utility grid of today, which was designed for one-way power flow, for intermediate grid scenarios, AND for the grid of tomorrow, which will seamlessly accommodate managed two-way power flows as required by large-scale deployment of solar and other distributed generation. The SEGIS hardware and control developed for today meets existing standards and codes AND provides for future connections to a "smart grid" mode that enables utility control and optimized performance.

High yield cell-free production of integral membrane proteins without refolding or detergents.

Science.gov (United States)

Wuu, Jessica J; Swartz, James R

2008-05-01

Integral membrane proteins act as critical cellular components and are important drug targets. However, difficulties in producing membrane proteins have hampered investigations of structure and function. In vivo production systems are often limited by cell toxicity, and previous in vitro approaches have required unnatural folding pathways using detergents or lipid solutions. To overcome these limitations, we present an improved cell-free expression system which produces high yields of integral membrane proteins without the use of detergents or refolding steps. Our cell-free reaction activates an Escherichia coli-derived cell extract for transcription and translation. Purified E. coli inner membrane vesicles supply membrane-bound components and the lipid environment required for insertion and folding. Using this system, we demonstrated successful synthesis of two complex integral membrane transporters, the tetracycline pump (TetA) and mannitol permease (MtlA), in yields of 570+/-50 microg/mL and 130+/-30 microg/mL of vesicle-associated protein, respectively. These yields are up to 400 times typical in vivo concentrations. Insertion and folding of these proteins are verified by sucrose flotation, protease digestion, and activity assays. Whereas TetA incorporates efficiently into vesicle membranes with over two-thirds of the synthesized protein being inserted, MtlA yields appear to be limited by insufficient concentrations of a membrane-associated chaperone.

Design Features of Product-Integrated PV: An Evaluation of Various Factors under Indoor Irradiance Conditions

OpenAIRE

Apostolou, G.

2016-01-01

This thesis explores the field of product-integrated photovoltaics (PIPV), a term which is used for all types of products that contain solar cells in one or more of their surfaces, aiming at providing power during the product’s use. Product-integrated photovoltaics (PIPV) began to be widely introduced around 2000, although the use of PV systems in products dates back to the 70s. PIPV includes products such as PV-powered boats, aircrafts, cars, bicycles, camping tents, street lights, recycling...

Scalar 3-point functions in CFT: renormalisation, beta functions and anomalies

Science.gov (United States)

Bzowski, Adam; McFadden, Paul; Skenderis, Kostas

2016-03-01

We present a comprehensive discussion of renormalisation of 3-point functions of scalar operators in conformal field theories in general dimension. We have previously shown that conformal symmetry uniquely determines the momentum-space 3-point functions in terms of certain integrals involving a product of three Bessel functions (triple- K integrals). The triple- K integrals diverge when the dimensions of operators satisfy certain relations and we discuss how to obtain renormalised 3-point functions in all cases. There are three different types of divergences: ultralocal, semilocal and nonlocal, and a given divergent triple- K integral may have any combination of them. Ultralocal divergences may be removed using local counterterms and this results in new conformal anomalies. Semilocal divergences may be removed by renormalising the sources, and this results in CFT correlators that satisfy Callan-Symanzik equations with beta functions. In the case of non-local divergences, it is the triple- K representation that is singular, not the 3-point function. Here, the CFT correlator is the coefficient of the leading nonlocal singularity, which satisfies all the expected conformal Ward identities. Such correlators exhibit enhanced symmetry: they are also invariant under dual conformal transformations where the momenta play the role of coordinates. When both anomalies and beta functions are present the correlators exhibit novel analytic structure containing products of logarithms of momenta. We illustrate our discussion with numerous examples, including free field realisations and AdS/CFT computations.

Introduction to functional and path integral methods in quantum field theory

International Nuclear Information System (INIS)

Strathdee, J.

1991-11-01

The following aspects concerning the use of functional and path integral methods in quantum field theory are discussed: generating functionals and the effective action, perturbation series, Yang-Mills theory and BRST symmetry. 10 refs, 3 figs

Integrated biocircuits: engineering functional multicellular circuits and devices

Science.gov (United States)

Prox, Jordan; Smith, Tory; Holl, Chad; Chehade, Nick; Guo, Liang

2018-04-01

Objective. Implantable neurotechnologies have revolutionized neuromodulatory medicine for treating the dysfunction of diseased neural circuitry. However, challenges with biocompatibility and lack of full control over neural network communication and function limits the potential to create more stable and robust neuromodulation devices. Thus, we propose a platform technology of implantable and programmable cellular systems, namely Integrated Biocircuits, which use only cells as the functional components of the device. Approach. We envision the foundational principles for this concept begins with novel in vitro platforms used for the study and reconstruction of cellular circuitry. Additionally, recent advancements in organoid and 3D culture systems account for microenvironment factors of cytoarchitecture to construct multicellular circuits as they are normally formed in the brain. We explore the current state of the art of these platforms to provide knowledge of their advancements in circuit fabrication and identify the current biological principles that could be applied in designing integrated biocircuit devices. Main results. We have highlighted the exemplary methodologies and techniques of in vitro circuit fabrication and propose the integration of selected controllable parameters, which would be required in creating suitable biodevices. Significance. We provide our perspective and propose new insights into the future of neuromodulaion devices within the scope of living cellular systems that can be applied in designing more reliable and biocompatible stimulation-based neuroprosthetics.

Productivity Effects of United States Multinational Enterprises : The Roles of Market Orientation and Regional Integration

NARCIS (Netherlands)

Smeets, Roger; Wei, Yingqi

2010-01-01

Smeets R. and Wei Y. Productivity effects of United States multinational enterprises: the roles of market orientation and regional integration, Regional Studies. This paper considers the role of market orientation and regional integration in foreign direct investment (FDI) productivity effects.

Some aspects of the translog production function estimation

Directory of Open Access Journals (Sweden)

Florin-Marius PAVELESCU

2011-06-01

Full Text Available In a translog production function, the number of parameters practically öexplodesö as the number of considered production factors increases. Consequently, the shortcoming in the estimation of the respective production function is the occurrence of collinearity. Theoretically, the collinearity impact is minimum if a single production factor is taken into account. In this case, we can determine not only the output elasticity but also the elasticity of scale related to the respective production factor. In the present paper, we demonstrate that the relationship between the output elasticity and estimated average elasticity of scale depends on the dynamics trajectory of the production factor, underexponential and overexponential, respectively. At the end, a practical example is offered, dealing with the computation of the Gross Domestic Product elasticity and average elasticity of scale related to employed population in the United Kingdom and France during 1999-2009.

Integrating Steel Production with Mineral Carbon Sequestration

Energy Technology Data Exchange (ETDEWEB)

Klaus Lackner; Paul Doby; Tuncel Yegulalp; Samuel Krevor; Christopher Graves

2008-05-01

The objectives of the project were (i) to develop a combination iron oxide production and carbon sequestration plant that will use serpentine ores as the source of iron and the extraction tailings as the storage element for CO2 disposal, (ii) the identification of locations within the US where this process may be implemented and (iii) to create a standardized process to characterize the serpentine deposits in terms of carbon disposal capacity and iron and steel production capacity. The first objective was not accomplished. The research failed to identify a technique to accelerate direct aqueous mineral carbonation, the limiting step in the integration of steel production and carbon sequestration. Objective (ii) was accomplished. It was found that the sequestration potential of the ultramafic resource surfaces in the US and Puerto Rico is approximately 4,647 Gt of CO2 or over 500 years of current US production of CO2. Lastly, a computer model was developed to investigate the impact of various system parameters (recoveries and efficiencies and capacities of different system components) and serpentinite quality as well as incorporation of CO2 from sources outside the steel industry.

Integration in design and manufacturing of polymer smart devices

NARCIS (Netherlands)

Bolt, P.J.; Zwart, R.M. de; Tacken, R.A.; Rendering, H.

2009-01-01

Integration of functions in single components is pursued in order to manufacture smaller and smarter polymer micro devices at less cost, through e.g. less assembly steps. It requires integration on both product and production side. This paper addresses the use of molded interconnect device (MID)

A participatory and integrative approach to improve productivity and ergonomics in assembly

NARCIS (Netherlands)

Looze, M.P. de; Rhijn, J.W. van; Deursen, J. van; Tuinzaad, G.H.; Reijneveld, C.N.

2003-01-01

A participatory and integrative approach was applied to improve the productivity and ergonomics of the assembly lines in two factories, producing magnetic stop valves and office furniture, respectively. Main elements of the approach are the active participation of the company and the integration of

Design and management of production systems: Integration of human factors and ergonomics

DEFF Research Database (Denmark)

Jensen, Per Langå; Broberg, Ole; Hasle, Peter

2006-01-01

Integration of ergonomics, human factors and occupational health and safety into design and management of pro-duction systems has for years been the major strategy for professional within the field. The traditional approach based on establishing ergonomic criteria’s to be integrated into other...

Speech networks at rest and in action: interactions between functional brain networks controlling speech production

Science.gov (United States)

Fuertinger, Stefan

2015-01-01

Speech production is one of the most complex human behaviors. Although brain activation during speaking has been well investigated, our understanding of interactions between the brain regions and neural networks remains scarce. We combined seed-based interregional correlation analysis with graph theoretical analysis of functional MRI data during the resting state and sentence production in healthy subjects to investigate the interface and topology of functional networks originating from the key brain regions controlling speech, i.e., the laryngeal/orofacial motor cortex, inferior frontal and superior temporal gyri, supplementary motor area, cingulate cortex, putamen, and thalamus. During both resting and speaking, the interactions between these networks were bilaterally distributed and centered on the sensorimotor brain regions. However, speech production preferentially recruited the inferior parietal lobule (IPL) and cerebellum into the large-scale network, suggesting the importance of these regions in facilitation of the transition from the resting state to speaking. Furthermore, the cerebellum (lobule VI) was the most prominent region showing functional influences on speech-network integration and segregation. Although networks were bilaterally distributed, interregional connectivity during speaking was stronger in the left vs. right hemisphere, which may have underlined a more homogeneous overlap between the examined networks in the left hemisphere. Among these, the laryngeal motor cortex (LMC) established a core network that fully overlapped with all other speech-related networks, determining the extent of network interactions. Our data demonstrate complex interactions of large-scale brain networks controlling speech production and point to the critical role of the LMC, IPL, and cerebellum in the formation of speech production network. PMID:25673742

Integrated Production-Distribution Scheduling Problem with Multiple Independent Manufacturers

Directory of Open Access Journals (Sweden)

Jianhong Hao

2015-01-01

Full Text Available We consider the nonstandard parts supply chain with a public service platform for machinery integration in China. The platform assigns orders placed by a machinery enterprise to multiple independent manufacturers who produce nonstandard parts and makes production schedule and batch delivery schedule for each manufacturer in a coordinate manner. Each manufacturer has only one plant with parallel machines and is located at a location far away from other manufacturers. Orders are first processed at the plants and then directly shipped from the plants to the enterprise in order to be finished before a given deadline. We study the above integrated production-distribution scheduling problem with multiple manufacturers to maximize a weight sum of the profit of each manufacturer under the constraints that all orders are finished before the deadline and the profit of each manufacturer is not negative. According to the optimal condition analysis, we formulate the problem as a mixed integer programming model and use CPLEX to solve it.

Path integral solutions of the master equation. [Lagrangian function, Ehrenfest-type theorem, Cauchy method, inverse functions

Energy Technology Data Exchange (ETDEWEB)

Etim, E; Basili, C [Rome Univ. (Italy). Ist. di Matematica

1978-08-21

The lagrangian in the path integral solution of the master equation of a stationary Markov process is derived by application of the Ehrenfest-type theorem of quantum mechanics and the Cauchy method of finding inverse functions. Applied to the non-linear Fokker-Planck equation the authors reproduce the result obtained by integrating over Fourier series coefficients and by other methods.

Generalization of the fejer-hadamard type inequalities for p-convex functions via k-fractional integrals

Directory of Open Access Journals (Sweden)

Ghulam Farid

2017-10-01

Full Text Available The aim of this paper is to obtain some more general fractional integral inequalities of Fejer Hadamard type for p-convex functions via Riemann-Liouville k-fractional integrals. Also in particular fractional inequalities for p-convex functions via Riemann-Liouville fractional integrals have been deduced.

Exponential Convergence for Numerical Solution of Integral Equations Using Radial Basis Functions

Directory of Open Access Journals (Sweden)

Zakieh Avazzadeh

2014-01-01

Full Text Available We solve some different type of Urysohn integral equations by using the radial basis functions. These types include the linear and nonlinear Fredholm, Volterra, and mixed Volterra-Fredholm integral equations. Our main aim is to investigate the rate of convergence to solve these equations using the radial basis functions which have normic structure that utilize approximation in higher dimensions. Of course, the use of this method often leads to ill-posed systems. Thus we propose an algorithm to improve the results. Numerical results show that this method leads to the exponential convergence for solving integral equations as it was already confirmed for partial and ordinary differential equations.

Logistics-production, logistics-marketing and external integration: Their impact on performance

OpenAIRE

Giménez, Cristina; Ventura, Eva

2003-01-01

Highly competitive environments are leading companies to implement Supply Chain Management (SCM) to improve performance and gain a competitive advantage. SCM involves integration, co-ordination and collaboration across organisations and throughout the supply chain. It means that SCM requires internal (intraorganisational) and external (interorganisational) integration. This paper examines the Logistics-Production and Logistics- Marketing interfaces and their relation with the external integra...

Functional integrity in children with anoxic brain injury from drowning.

Science.gov (United States)

Ishaque, Mariam; Manning, Janessa H; Woolsey, Mary D; Franklin, Crystal G; Tullis, Elizabeth W; Beckmann, Christian F; Fox, Peter T

2017-10-01

Drowning is a leading cause of accidental injury and death in young children. Anoxic brain injury (ABI) is a common consequence of drowning and can cause severe neurological morbidity in survivors. Assessment of functional status and prognostication in drowning victims can be extremely challenging, both acutely and chronically. Structural neuroimaging modalities (CT and MRI) have been of limited clinical value. Here, we tested the utility of resting-state functional MRI (rs-fMRI) for assessing brain functional integrity in this population. Eleven children with chronic, spastic quadriplegia due to drowning-induced ABI were investigated. All were comatose immediately after the injury and gradually regained consciousness, but with varying ability to communicate their cognitive state. Eleven neurotypical children matched for age and gender formed the control group. Resting-state fMRI and co-registered T1-weighted anatomical MRI were acquired at night during drug-aided sleep. Network integrity was quantified by independent components analysis (ICA), at both group- and per-subject levels. Functional-status assessments based on in-home observations were provided by families and caregivers. Motor ICNs were grossly compromised in ABI patients both group-wise and individually, concordant with their prominent motor deficits. Striking preservations of perceptual and cognitive ICNs were observed, and the degree of network preservation correlated (ρ = 0.74) with the per-subject functional status assessments. Collectively, our findings indicate that rs-fMRI has promise for assessing brain functional integrity in ABI and, potentially, in other disorders. Furthermore, our observations suggest that the severe motor deficits observed in this population can mask relatively intact perceptual and cognitive capabilities. Hum Brain Mapp 38:4813-4831, 2017. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

Characterization of dilation analytic integral kernels

Energy Technology Data Exchange (ETDEWEB)

Vici, A D [Rome Univ. (Italy). Ist. di Matematica

1979-11-01

The author characterises integral operators belonging to B(L/sup 2/(R/sup 3/)) which are dilatation analytic in the Cartesian product of two sectors Ssub(a) contains C as analytic functions from Ssub(a) X Ssub(a) into B(L/sup 2/(..cap omega..)), the space of bounded operators on square integrable functions on the unit sphere ..cap omega.., which satisfy certain norm estimates uniformly on every subsector.

Mouldable all-carbon integrated circuits.

Science.gov (United States)

Sun, Dong-Ming; Timmermans, Marina Y; Kaskela, Antti; Nasibulin, Albert G; Kishimoto, Shigeru; Mizutani, Takashi; Kauppinen, Esko I; Ohno, Yutaka

2013-01-01

A variety of plastic products, ranging from those for daily necessities to electronics products and medical devices, are produced by moulding techniques. The incorporation of electronic circuits into various plastic products is limited by the brittle nature of silicon wafers. Here we report mouldable integrated circuits for the first time. The devices are composed entirely of carbon-based materials, that is, their active channels and passive elements are all fabricated from stretchable and thermostable assemblies of carbon nanotubes, with plastic polymer dielectric layers and substrates. The all-carbon thin-film transistors exhibit a mobility of 1,027 cm(2) V(-1) s(-1) and an ON/OFF ratio of 10(5). The devices also exhibit extreme biaxial stretchability of up to 18% when subjected to thermopressure forming. We demonstrate functional integrated circuits that can be moulded into a three-dimensional dome. Such mouldable electronics open new possibilities by allowing for the addition of electronic/plastic-like functionalities to plastic/electronic products, improving their designability.

Integral measurement of fission products capture in fast breeder reactors

International Nuclear Information System (INIS)

Martin Deidier, Loick.

1979-12-01

For the SUPERPHENIX reactor project, it was necessary to know fission products capture with about 10% accuracy in the fast breeder reactor spectra. In this purpose, integral measurements have been carried out on the main separated products by different experimental technics (oscillation, activation and irradiation methods), but particularly on irradiated fuel pins from RAPSODIE and PHENIX reactors in order to directly obtain total effect of fission products. Same tendencies have been observed for both enriched uranium fuel and LMFBR characteristic plutonium fuel. All experimental results have been introduced in CARNAVAL cross section set [fr

Land administration for housing production : analysis of need for interagency integration

NARCIS (Netherlands)

Agunbiade, M.E.; Rajabifard, A.; Bennett, R.M.

2014-01-01

In most country contexts the activities of government land administration agencies, those dealing with the functions of land tenure, valuation, planning, and development, are disparate and lack harmonisation. This paper analyses the imperative for integrating these functions across and between

The SOS model partition function and the elliptic weight functions

International Nuclear Information System (INIS)

Pakuliak, S; Silantyev, A; Rubtsov, V

2008-01-01

We generalized a recent observation (Khoroshkin and Pakuliak 2005 Theor. Math. Phys. 145 1373) that the partition function of the six-vertex model with domain wall boundary conditions can be obtained from a calculation of projections of the product of total currents in the quantum affine algebra U q (sl 2 -hat) in its current realization. A generalization is done for the elliptic current algebra (Enriquez and Felder 1998 Commun. Math. Phys. 195 651, Enriquez and Rubtsov 1997 Ann. Sci. Ecole Norm. Sup. 30 821). The projections of the product of total currents in this case are calculated explicitly and are presented as integral transforms of a product of the total currents. It is proved that the integral kernel of this transform is proportional to the partition function of the SOS model with domain wall boundary conditions

Production Functions for Water Delivery Systems: Analysis and Estimation Using Dual Cost Function and Implicit Price Specifications

Science.gov (United States)

Teeples, Ronald; Glyer, David

1987-05-01

Both policy and technical analysis of water delivery systems have been based on cost functions that are inconsistent with or are incomplete representations of the neoclassical production functions of economics. We present a full-featured production function model of water delivery which can be estimated from a multiproduct, dual cost function. The model features implicit prices for own-water inputs and is implemented as a jointly estimated system of input share equations and a translog cost function. Likelihood ratio tests are performed showing that a minimally constrained, full-featured production function is a necessary specification of the water delivery operations in our sample. This, plus the model's highly efficient and economically correct parameter estimates, confirms the usefulness of a production function approach to modeling the economic activities of water delivery systems.

Integrated weed management for sustainable rice production: concepts, perspectives and options

International Nuclear Information System (INIS)

Amartalingam Rajan

2002-01-01

Weed management has always been in some way integrated with cultural and biological methods, probably occurring more fortuitously than purposefully. Experience has shown that repeated use of any weed control technique especially in monocultures production systems results in rapid emergence of weeds more adapted to the new practice. In intensive high input farming systems, heavy selection pressure for herbicide tolerant weeds and the environmental impacts of these inputs are important tissues that require a good understanding of agroecosystem for successful integration of available options. Rice culture, in particular flooded rice culture has always employed integration through an evolution of management practices over the generations. However, a vast majority office farmers in Asia have yet to achieve the high returns realised by farmers elsewhere, where a near optimum combination of high inputs are being effectively integrated for maximum productivity. In addition to technological and management limitations, farmers in developing countries are faced with social, economic and policy constraints. On the other hand, farmers who had achieved considerable increases in productivity through labour replacing technologies, in particular direct seeding with the aid of herbicides, are now faced with issues related to environmental concerns due to high levels of these inputs. The issues facing weed scientists and farmers alike in managing weeds effectively and in a manner to ensure sustainability have become more challenging than ever before. In the last two decades, no issue has been discussed so. intensively as Sustainable Farming, Sustainable Agriculture or Alternative Agriculture within the broader global concept of Sustainable Development. To address these challenges a clear perspective of sustainable farming is essential. This paper addresses these concepts, perspectives and options for choices in weed management for sustainable rice production. (Author)

An innovative model of integrated mentorship in film production

Directory of Open Access Journals (Sweden)

Boštjan Miha Jambrek

2016-11-01

Full Text Available In this article, the author focuses on an innovative approach towards mentoring in film production. Emphasis is placed on a model of integrated mentorship in which the mentor becomes a part of the creative process. The mentor operates from within the creative process and works on an equal basis with the mentee in areas such as production, brainstorming, and problem-solving. This kind of approach assumes reciprocal learning and uses an adult education methodology in a formal pedagogical process. Our research was conducted as a participatory research observation, with participation in several short film productions at the Ljubljana High School for Media and Graphic Technology and the Artes Liberales Film Academy.

Integrative Identification of Arabidopsis Mitochondrial Proteome and Its Function Exploitation through Protein Interaction Network

Science.gov (United States)

Cui, Jian; Liu, Jinghua; Li, Yuhua; Shi, Tieliu

2011-01-01

Mitochondria are major players on the production of energy, and host several key reactions involved in basic metabolism and biosynthesis of essential molecules. Currently, the majority of nucleus-encoded mitochondrial proteins are unknown even for model plant Arabidopsis. We reported a computational framework for predicting Arabidopsis mitochondrial proteins based on a probabilistic model, called Naive Bayesian Network, which integrates disparate genomic data generated from eight bioinformatics tools, multiple orthologous mappings, protein domain properties and co-expression patterns using 1,027 microarray profiles. Through this approach, we predicted 2,311 candidate mitochondrial proteins with 84.67% accuracy and 2.53% FPR performances. Together with those experimental confirmed proteins, 2,585 mitochondria proteins (named CoreMitoP) were identified, we explored those proteins with unknown functions based on protein-protein interaction network (PIN) and annotated novel functions for 26.65% CoreMitoP proteins. Moreover, we found newly predicted mitochondrial proteins embedded in particular subnetworks of the PIN, mainly functioning in response to diverse environmental stresses, like salt, draught, cold, and wound etc. Candidate mitochondrial proteins involved in those physiological acitivites provide useful targets for further investigation. Assigned functions also provide comprehensive information for Arabidopsis mitochondrial proteome. PMID:21297957

Principles and core functions of integrated child health information systems.

Science.gov (United States)

Hinman, Alan R; Atkinson, Delton; Diehn, Tonya Norvell; Eichwald, John; Heberer, Jennifer; Hoyle, Therese; King, Pam; Kossack, Robert E; Williams, Donna C; Zimmerman, Amy

2004-11-01

Infants undergo a series of preventive and therapeutic health interventions and activities. Typically, each activity includes collection and submission of data to a dedicated information system. Subsequently, health care providers, families, and health programs must query each information system to determine the child's status in a given area. Efforts are underway to integrate information in these separate information systems. This requires specifying the core functions that integrated information systems must perform.

Economic Integration and Quality Standards in a Duopoly Model with Horizontal and Vertical Product Differentiation

DEFF Research Database (Denmark)

Nielsen, Jørgen Ulff-Møller; Hansen, Jørgen Drud

This paper examines the effects of trade barriers on quality levels in a duopoly model for two countries with one producer in each country. The products are both vertically and horizontally differentiated. In absence of quality regulation, the two producers determine prices and quality levels...... standards are also ambiguous depending on the parameters of the model. Keywords: Vertical product differentiation; horizontal product differentiation; market integration; duopoly; minimum quality standard. JEL: F12, F13, F14....... product. On the unregulated markets, integration increases welfare in both countries if they are almost of similar size. However, if the countries are very asymmetrical with respect to size, market integration may harm welfare in the large country. Welfare effects by introduction of minimum quality...

Reduction theorems for weighted integral inequalities on the cone of monotone functions

International Nuclear Information System (INIS)

Gogatishvili, A; Stepanov, V D

2013-01-01

This paper surveys results related to the reduction of integral inequalities involving positive operators in weighted Lebesgue spaces on the real semi-axis and valid on the cone of monotone functions, to certain more easily manageable inequalities valid on the cone of non-negative functions. The case of monotone operators is new. As an application, a complete characterization for all possible integrability parameters is obtained for a number of Volterra operators. Bibliography: 118 titles

Impacts of integration of production of black and green energy

International Nuclear Information System (INIS)

Zhou, Huizhong; Tamas, Meszaros Matyas

2010-01-01

As the mandate for minimum renewable sources renders Tradable Green Certificates (TGCs) an essential input for power generation, it may induce mergers between power companies of conventional and renewable sources. Such mergers enable the integrated firms to extend market power from the TGC market to the physical energy market. We find that the price of TGCs is indeed higher in the integrated market than the disintegrated market, indicating the presence of market power leveraging. However, despite higher TGC price, the total supply of electricity is greater under integration than disintegration, reflecting efficiency gains from vertical integration, which eliminates double marginalization. The thrust of this paper is that market changes induced by environmental policies will in turn affect environmental and economic regulations. For example, increased supply resulting from integration induced by the renewable source mandate may reduce the effectiveness of programs that promote energy saving behavior, but at the same time creates room for raising the minimum of renewable sources without unduly depressing production and consumption. (author)

Integrative mining of traditional Chinese medicine literature and MEDLINE for functional gene networks.

Science.gov (United States)

Zhou, Xuezhong; Liu, Baoyan; Wu, Zhaohui; Feng, Yi

2007-10-01

The amount of biomedical data in different disciplines is growing at an exponential rate. Integrating these significant knowledge sources to generate novel hypotheses for systems biology research is difficult. Traditional Chinese medicine (TCM) is a completely different discipline, and is a complementary knowledge system to modern biomedical science. This paper uses a significant TCM bibliographic literature database in China, together with MEDLINE, to help discover novel gene functional knowledge. We present an integrative mining approach to uncover the functional gene relationships from MEDLINE and TCM bibliographic literature. This paper introduces TCM literature (about 50,000 records) as one knowledge source for constructing literature-based gene networks. We use the TCM diagnosis, TCM syndrome, to automatically congregate the related genes. The syndrome-gene relationships are discovered based on the syndrome-disease relationships extracted from TCM literature and the disease-gene relationships in MEDLINE. Based on the bubble-bootstrapping and relation weight computing methods, we have developed a prototype system called MeDisco/3S, which has name entity and relation extraction, and online analytical processing (OLAP) capabilities, to perform the integrative mining process. We have got about 200,000 syndrome-gene relations, which could help generate syndrome-based gene networks, and help analyze the functional knowledge of genes from syndrome perspective. We take the gene network of Kidney-Yang Deficiency syndrome (KYD syndrome) and the functional analysis of some genes, such as CRH (corticotropin releasing hormone), PTH (parathyroid hormone), PRL (prolactin), BRCA1 (breast cancer 1, early onset) and BRCA2 (breast cancer 2, early onset), to demonstrate the preliminary results. The underlying hypothesis is that the related genes of the same syndrome will have some biological functional relationships, and will constitute a functional network. This paper presents

Energy Production System Management - Renewable energy power supply integration with Building Automation System

International Nuclear Information System (INIS)

Figueiredo, Joao; Martins, Joao

2010-01-01

Intelligent buildings, historically and technologically, refers to the integration of four distinctive systems: Building Automation Systems (BAS), Telecommunication Systems, Office Automation Systems and Computer Building Management Systems. The increasing sophisticated BAS has become the 'heart and soul' of modern intelligent buildings. Integrating energy supply and demand elements - often known as Demand-Side Management (DSM) - has became an important energy efficiency policy concept. Nowadays, European countries have diversified their power supplies, reducing the dependence on OPEC, and developing a broader mix of energy sources maximizing the use of renewable energy domestic sources. In this way it makes sense to include a fifth system into the intelligent building group: Energy Production System Management (EPSM). This paper presents a Building Automation System where the Demand-Side Management is fully integrated with the building's Energy Production System, which incorporates a complete set of renewable energy production and storage systems.

Integrals involving functions of the type (WS)sup(q)

International Nuclear Information System (INIS)

Srivastava, D.K.

1981-10-01

Analytical expressions for integrals involving functions of the Woods-Saxon type raised to the power of q are given. These are expected to be of immediate application in optical model studies and for obtaining various moments of the potential having such shapes. (author)

Functionality of alternative protein in gluten-free product development.

Science.gov (United States)

Deora, Navneet Singh; Deswal, Aastha; Mishra, Hari Niwas

2015-07-01

Celiac disease is an immune-mediated disease triggered in genetically susceptible individuals by ingested gluten from wheat, rye, barley, and other closely related cereal grains. The current treatment for celiac disease is life-long adherence to a strict gluten-exclusion diet. The replacement of gluten presents a significant technological challenge, as it is an essential structure-building protein, which is necessary for formulating high-quality baked goods. A major limitation in the production of gluten-free products is the lack of protein functionality in non-wheat cereals. Additionally, commercial gluten-free mixes usually contain only carbohydrates, which may significantly limit the amount of protein in the diet. In the recent past, various approaches are attempted to incorporate protein-based ingredients and to modify the functional properties for gluten-free product development. This review aims to the highlight functionality of the alternative protein-based ingredients, which can be utilized for gluten-free product development both functionally as well as nutritionally. © The Author(s) 2014.

Approaches to the summability of divergent multidimensional integrals

International Nuclear Information System (INIS)

Vainikko, G M; Lifanov, I K

2003-01-01

Under discussion are various approaches to the concept of summability (finding the finite part - (f.p.)) of divergent integrals with integrand represented as a product of two functions, one with a parameter-dependent non-integrable singularity at one point of the integration and the other absolutely integrable. A study is made of summability methods which are based on the expansion of the absolutely integrable function in a Taylor series with centre at the singular point (f.p.), on the analytic continuation with respect to the parameter of the singularity (a.f.p.), and on integration by parts (f.p.p.). Formulae of changes of variables in such integrals are presented

CALCULATIONS OF DOUBLE IMPURITY DIFFUSION IN INTEGRATED CIRCUIT PRODUCTION

Directory of Open Access Journals (Sweden)

V. A. Bondarev

2005-01-01

Full Text Available Analytical formulae for calculating simultaneous diffusion of two impurities in silicon are presented. The formulae are based on analytical solutions of diffusion equations that have been obtained for the first time by the author while using some special mathematical functions. In contrast to usual formal mathematical approaches, new functions are determined in the process of investigation of real physical models. Algorithms involve some important relations from thermodynamics of irreversible processes and also variational thermodynamic functionals that were previously obtained by the author for transfer processes. Calculations considerably reduce the time required for development of new integrated circuits. 

The massless two-loop two-point function

International Nuclear Information System (INIS)

Bierenbaum, I.; Weinzierl, S.

2003-01-01

We consider the massless two-loop two-point function with arbitrary powers of the propagators and derive a representation from which we can obtain the Laurent expansion to any desired order in the dimensional regularization parameter ε. As a side product, we show that in the Laurent expansion of the two-loop integral only rational numbers and multiple zeta values occur. Our method of calculation obtains the two-loop integral as a convolution product of two primitive one-loop integrals. We comment on the generalization of this product structure to higher loop integrals. (orig.)

Fractional Integral and Generalized Stieltjes Transforms for Hypergeometric Functions as Transmutation Operators

NARCIS (Netherlands)

Koornwinder, T.H.

2015-01-01

For each of the eight n-th derivative parameter changing formulas for Gauss hypergeometric functions a corresponding fractional integration formula is given. For both types of formulas the differential or integral operator is intertwining between two actions of the hypergeometric differential

Improving the quality of pork and pork products for the consumer : development of innovative, integrated, and sustainable food production chains of high quality pork products matching consumer demands

NARCIS (Netherlands)

Heimann, B.; Christensen, M.; Rosendal Rasmussen, S.; Bonneau, M.; Grunert, K.G.; Arnau, J.; Trienekens, J.H.; Oksbjerg, N.; Greef, de K.H.; Petersen, B.

2012-01-01

Improving the quality of pork and pork products for the consumer: development of innovative, integrated, and sustainable food production chains of high quality pork products matching consumer demands.

Classical representation of wave functions for integrable systems

International Nuclear Information System (INIS)

Kay, Kenneth G.

2004-01-01

Classical exact (CE) wave functions are certain integral representations of energy eigenfunctions that are parameterized in terms of the motion of the corresponding classical system in a semiclassically relevant way. When applied to systems for which they are not exact, such expressions serve as semiclassical approximations. Previous work identified CE wave functions for a number of specific systems and established their semiclassical usefulness. This paper explores the degree to which such representations can be found for more general systems. It is shown that CE wave functions exist, in principle, for bound states of an arbitrary integrable system that are confined to a single classically allowed region. Evidence is presented that CE representations also exist for more general states of such a system that are unbound, or that extend over more than one allowed region. The CE expressions are not unique: an innumerable variety exists for each such system. The existence proof provides a formal method for constructing CE expressions by Fourier transforming certain superpositions of energy eigenstates. The parameterization in terms of the classical motion is achieved by identifying certain quantities in these superpositions as classical action and angle variables. The semiclassical relevance of this identification is ensured by imposing some mild conditions on the coefficients in the superposition. This procedure for parameterizing exact wave functions in terms of classical variables indicates a basic relationship between the quantum and classical descriptions of states. The method of constructing CE wave functions introduced in the proof is shown to be consistent with a number of previously obtained CE formulas and is used to derive two new, closed-form, CE expressions. A simple numerical example is presented to illustrate the semiclassical application of one of these expressions and to further verify the physical significance of the classical parameterization