Payment Mechanisms for Integrated Teams in Construction

Directory of Open Access Journals (Sweden)

Ibrahim Motawa

2012-11-01

Full Text Available The overwhelming consensus for process andteam integration has emerged as an enabler tomanage construction projects. Theperformance of integrated teams is highlyaffected by the adopted payment mechanism.However, the payment mechanisms availablefor a project may need the team tocompromise in order to agree on a fairmechanism for as many members as possible.This paper introduces a methodology tosimulate the profiles of alternative paymentmechanisms. The methodology aims to helpproject teams define the most appropriatemechanism for each member. The proposedmethodology is therefore novel and superior toexisting cash flow models where the focus hasbeen limited to main contractors only. Topromote its use as a performance enablingmechanism, the methodology utilizes “theproject process map”, “the stakeholders &supply chain”, “the pricing method” and “thepayment mechanism”. This will act as an aid todesign or “fine-tune” payment mechanisms toindividual projects characteristics consideringpayment for off-site materials andcomponents, which always concerns projectfabricators and supply chain.

Introducing a short measure of shared servant leadership impacting team performance through team behavioral integration

NARCIS (Netherlands)

M. Sousa (Milton); D. van Dierendonck (Dirk)

2016-01-01

textabstractThe research reported in this paper was designed to study the influence of shared servant leadership on team performance through the mediating effect of team behavioral integration, while validating a new short measure of shared servant leadership. A round-robin approach was used to

Integrated product development and experience of communication in education

NARCIS (Netherlands)

H. Ihle; Ir. Dick van Schenk Brill; Ir. Peter van Kollenburg; Ir. H.E.V. Veenstra

2000-01-01

The Technical Departments at the Fontys University of Professional Education in Eindhoven, The Netherlands, offer a course which is devel-oped around the principles of Concurrent Engi-neering. Integrated Product Development (IPD) project teams are multi-disciplinary groups which develop products in

Introducing a Short Measure of Shared Servant Leadership Impacting Team Performance through Team Behavioral Integration

OpenAIRE

Sousa, Milton; Van Dierendonck, Dirk

2016-01-01

textabstractThe research reported in this paper was designed to study the influence of shared servant leadership on team performance through the mediating effect of team behavioral integration, while validating a new short measure of shared servant leadership. A round-robin approach was used to collect data in two similar studies. Study 1 included 244 undergraduate students in 61 teams following an intense HRM business simulation of 2 weeks. The following year, study 2 included 288 students i...

Productivity in Knowledge Worker Teams

OpenAIRE

Moreno Romero, Ana María; Mahou Fernández, Ángel; Varanki, H.

2013-01-01

The use of Information and Communication Technologies in work pro- cesses has not brought the expected productivity improvement. Some studies even suggest that the always-on model decreases productivity. This article proposes work teams as a new unit for knowledge worker productivity analysis in organizations. Organizations? ability to adopt new analysis measures is analyzed in three case studies.

The Times They Are a Changin': Neuropsychology and Integrated Care Teams.

Science.gov (United States)

Kubu, Cynthia S; Ready, Rebecca E; Festa, Joanne R; Roper, Brad L; Pliskin, Neil H

2016-01-01

To gather illustrative data from clinical neuropsychologists who are working in integrated care settings in order to provide an initial blueprint for moving forward in this new era of health care. A survey was designed to illustrate the ways in which neuropsychologists are participating in integrated care teams and distributed on major neuropsychology listservs. The survey evaluated the settings, roles, services provided, practice issues, remuneration, and impact of neuropsychologists' participation in integrated care teams with respect to patient care and health outcomes. Frequencies were used to summarize the findings as well as qualitative coding of narrative responses. There were 412 respondents to the survey and 261 of those indicated that they worked in at least one integrated care setting. Neuropsychologists work in a variety of integrated care settings and provide diverse services which contribute to improved patient care and outcomes. Three primary themes emerge from the findings with regard to the engagement and teams: advocacy, collaboration, and communication. We argue for the need for more easily accessible outcome studies illustrating the clinical benefits and cost-savings associated with inclusion of neuropsychologists in integrated care teams. In addition, educational and training initiatives are needed to better equip current and future clinical neuropsychologists to function effectively in integrated care settings.

The return map: tracking product teams.

Science.gov (United States)

House, C H; Price, R L

1991-01-01

With a new product, time is now more valuable than money. The costs of conceiving and designing a product are less important to its ultimate success than timeliness to market. One of the most important ways to speed up product development is through interfunctional teamwork. The "Return Map," developed at Hewlett-Packard, provides a way for people from different functions to triangulate on the product development process as a whole. It graphically represents the contributions of all team members to the moment when a project breaks even. It forces the team to estimate and re-estimate the time it will take to perform critical tasks, so that products can get out fast. It subjects the team to the only discipline that works, namely, self-discipline. The map is, in effect, a graph representing time and money, where the time line is divided into three phases: investigation, development, and manufacturing and sales. Meanwhile, costs are plotted against time--as are revenues when they are realized after manufacturing release. Within these points of reference, four novel metrics emerge: Break-Even-Time, Time-to-Market, Break-Even-After-Release, and the Return Factor. All metrics are estimated at the beginning of a project to determine its feasibility, then they are tracked carefully while the project evolves to determine its success. Missed forecasts are inevitable, but managers who punish employees for missing their marks will only encourage them to estimate conservatively, thus building slack into a system meant to eliminate slack. Estimates are a team responsibility, and deviations provide valuable information that spurs continuous investigation and improvement.

Building Productivity in Virtual Project Teams

Directory of Open Access Journals (Sweden)

Bill Hamersly

2015-04-01

Full Text Available The steady increase in project failure rates is leaving businesses searching for better integration techniques to virtualize their project environments. Through virtualization, organizations may have positive impacts on communities across geographical boundaries and resource constraints. The focus of this phenomenological study was to explore, via the experiences of successful project management practitioners, best practice strategies for integrating virtual project teams through data analysis. The conceptual framework included von Bertalanffy’s general systems theory, decomposition model of business process and project management frameworks, and the recomposition approach. Twenty-two senior project managers with more than 5 years of experience managing virtual project environments participated in semistructured telephone interviews. The van Kaam process employing normalization and bracketing approaches in data analysis resulted in the emergence of 34 thematic categories. The 10 most common themes culminated in the identification of strategies relevant for virtual project teams. The major themes pertained to 3 broad areas: (a structure that accommodates skills and technology for virtual team success, (b governance leading to efficient virtual project team management, and (c collaboration practices across diverse environments. This study involved the exploration of the experiences of the participants. Using the van Kaam method for normalization of the data and clustering like experiences into thematic statements, the study provided a plethora of new information concentrated on 10 themes that emerged.

Team Science, Justice, and the Co-Production of Knowledge.

Science.gov (United States)

Tebes, Jacob Kraemer

2018-06-08

Science increasingly consists of interdisciplinary team-based research to address complex social, biomedical, public health, and global challenges through a practice known as team science. In this article, I discuss the added value of team science, including participatory team science, for generating scientific knowledge. Participatory team science involves the inclusion of public stakeholders on science teams as co-producers of knowledge. I also discuss how constructivism offers a common philosophical foundation for both community psychology and team science, and how this foundation aligns well with contemporary developments in science that emphasize the co-production of knowledge. I conclude with a discussion of how the co-production of knowledge in team science can promote justice. © Society for Community Research and Action 2018.

Accountability in integrated working: Meaning and implications for cancer care teams

International Nuclear Information System (INIS)

Colyer, Hazel

2012-01-01

This article presents a critical evaluation of the concepts of accountability and delegated authority and how this impacts on integrated working in cancer care teams. It looks at the difficulties experienced by radiographers in establishing their roles in integrated teams through an analysis of how professional teams have developed from a sociological and historical perspective. The paper highlights the contestability of the terms and contends that many non-medical professional practitioners experience problems with assuming full accountability. The article acknowledges and advocates that the wishes of patients and clients must be prioritised in the decision making process, thus requiring professionals to embrace accountability fully and differentiate and manage risk. The importance of leadership in furthering the achievement of integrated working is recognised. In conclusion, the article proposes that shared accountability among teams is challenging for radiographers and others, and that education providers should take this into account when designing curricula.

How Diversity Matters in the US Science and Engineering Workforce: A Critical Review Considering Integration in Teams, Fields, and Organizational Contexts

Directory of Open Access Journals (Sweden)

Laurel Smith-Doerr

2017-04-01

Full Text Available How the race and gender diversity of team members is related to innovative science and technology outcomes is debated in the scholarly literature. Some studies find diversity is linked to creativity and productivity, other studies find that diversity has no effect or even negative effects on team outcomes. Based on a critical review of the literature, this paper explains the seemingly contradictory findings through careful attention to the organizational contexts of team diversity. We distinguish between representational diversity and full integration of minority scientists. Representational diversity, where organizations have workforces that match the pool of degree recipients in relevant fields, is a necessary but not sufficient condition for diversity to yield benefits. Full integration of minority scientists (i.e., including women and people of color in an interaction context that allows for more level information exchange, unimpeded by the asymmetrical power relationships that are common across many scientific organizations, is when the full potential for diversity to have innovative outcomes is realized. Under conditions of equitable and integrated work environments, diversity leads to creativity, innovation, productivity, and positive reputational (status effects. Thus, effective policies for diversity in science and engineering must also address integration in the organizational contexts in which diverse teams are embedded.

Bridging UX and web development better results through team integration

CERN Document Server

Moffett, Jack

2014-01-01

The divide between UX and Web development can be stifling. Bridging UX and Web Development prepares you to break down those walls by teaching you how to integrate with your team's developers. You examine the process from their perspective, discovering tools and coding principles that will help you bridge the gap between design and implementation. With these tried and true approaches, you'll be able to capitalize on a more productive work environment. Whether you're a novice UX professional finding your place in the software industry and looking to nail down your technical skills, or a seasone

Challenges associated with knowledge sharing in international product development teams

DEFF Research Database (Denmark)

Sonne, Anne-Mette; Harmsen, Hanne

on product development teams, knowledge sharing, and international product development management to form a conceptual framework of factors that influence knowledge sharing in international teams. Four in-depth case studies are used to explore and expand the understanding of the challenges associated...... with international product development teams. Results indicate that international product development might not be as international as would be expected and that even if many of the characteristics and problems associated with international product development in the literature are found, there are also a number...

Hydrogen Production Technical Team Roadmap

Energy Technology Data Exchange (ETDEWEB)

None

2013-06-01

The Hydrogen Production Technical Team Roadmap identifies research pathways leading to hydrogen production technologies that produce near-zero net greenhouse gas (GHG) emissions from highly efficient and diverse renewable energy sources. This roadmap focuses on initial development of the technologies, identifies their gaps and barriers, and describes activities by various U.S. Department of Energy (DOE) offices to address the key issues and challenges.

Group Development and Integration in a Cross-Disciplinary and Intercultural Research Team

Science.gov (United States)

Kirk-Lawlor, Naomi; Allred, Shorna

2017-04-01

Cross-disciplinary research is necessary to solve many complex problems that affect society today, including problems involving linked social and environmental systems. Examples include natural resource management or scarcity problems, problematic effects of climate change, and environmental pollution issues. Intercultural research teams are needed to address many complex environmental matters as they often cross geographic and political boundaries, and involve people of different countries and cultures. It follows that disciplinarily and culturally diverse research teams have been organized to investigate and address environmental issues. This case study investigates a team composed of both monolingual and bilingual Chilean and US university researchers who are geoscientists, engineers and economists. The objective of this research team was to study both the natural and human parts of a hydrologic system in a hyper-arid region in northern Chile. Interviews ( n = 8) addressed research questions focusing on the interaction of cross-disciplinary diversity and cultural diversity during group integration and development within the team. The case study revealed that the group struggled more with cross-disciplinary challenges than with intercultural ones. Particularly challenging ones were instances the of disciplinary crosstalk, or hidden misunderstandings, where team members thought they understood their cross-disciplinary colleagues, when in reality they did not. Results showed that translation served as a facilitator to cross-disciplinary integration of the research team. The use of translation in group meetings as a strategy for effective cross-disciplinary integration can be extended to monolingual cross-disciplinary teams as well.

Group Development and Integration in a Cross-Disciplinary and Intercultural Research Team.

Science.gov (United States)

Kirk-Lawlor, Naomi; Allred, Shorna

2017-04-01

Cross-disciplinary research is necessary to solve many complex problems that affect society today, including problems involving linked social and environmental systems. Examples include natural resource management or scarcity problems, problematic effects of climate change, and environmental pollution issues. Intercultural research teams are needed to address many complex environmental matters as they often cross geographic and political boundaries, and involve people of different countries and cultures. It follows that disciplinarily and culturally diverse research teams have been organized to investigate and address environmental issues. This case study investigates a team composed of both monolingual and bilingual Chilean and US university researchers who are geoscientists, engineers and economists. The objective of this research team was to study both the natural and human parts of a hydrologic system in a hyper-arid region in northern Chile. Interviews (n = 8) addressed research questions focusing on the interaction of cross-disciplinary diversity and cultural diversity during group integration and development within the team. The case study revealed that the group struggled more with cross-disciplinary challenges than with intercultural ones. Particularly challenging ones were instances the of disciplinary crosstalk, or hidden misunderstandings, where team members thought they understood their cross-disciplinary colleagues, when in reality they did not. Results showed that translation served as a facilitator to cross-disciplinary integration of the research team. The use of translation in group meetings as a strategy for effective cross-disciplinary integration can be extended to monolingual cross-disciplinary teams as well.

SHARP's systems engineering challenge: rectifying integrated product team requirements with performance issues in an evolutionary spiral development acquisition

Science.gov (United States)

Kuehl, C. Stephen

2003-08-01

Completing its final development and early deployment on the Navy's multi-role aircraft, the F/A-18 E/F Super Hornet, the SHAred Reconnaissance Pod (SHARP) provides the war fighter with the latest digital tactical reconnaissance (TAC Recce) Electro-Optical/Infrared (EO/IR) sensor system. The SHARP program is an evolutionary acquisition that used a spiral development process across a prototype development phase tightly coupled into overlapping Engineering and Manufacturing Development (EMD) and Low Rate Initial Production (LRIP) phases. Under a tight budget environment with a highly compressed schedule, SHARP challenged traditional acquisition strategies and systems engineering (SE) processes. Adopting tailored state-of-the-art systems engineering process models allowd the SHARP program to overcome the technical knowledge transition challenges imposed by a compressed program schedule. The program's original goal was the deployment of digital TAC Recce mission capabilities to the fleet customer by summer of 2003. Hardware and software integration technical challenges resulted from requirements definition and analysis activities performed across a government-industry led Integrated Product Team (IPT) involving Navy engineering and test sites, Boeing, and RTSC-EPS (with its subcontracted hardware and government furnished equipment vendors). Requirements development from a bottoms-up approach was adopted using an electronic requirements capture environment to clarify and establish the SHARP EMD product baseline specifications as relevant technical data became available. Applying Earned-Value Management (EVM) against an Integrated Master Schedule (IMS) resulted in efficiently managing SE task assignments and product deliveries in a dynamically evolving customer requirements environment. Application of Six Sigma improvement methodologies resulted in the uncovering of root causes of errors in wiring interconnectivity drawings, pod manufacturing processes, and avionics

A Visual Interface Diagram For Mapping Functions In Integrated Products

DEFF Research Database (Denmark)

Ingerslev, Mattias; Oliver Jespersen, Mikkel; Göhler, Simon Moritz

2015-01-01

In product development there is a recognized tendency towards increased functionality for each new product generation. This leads to more integrated and complex products, with the risk of development delays and quality issues as a consequence of lacking overview and transparency. The work described...... of visualizing relations between parts and functions in highly integrated mechanical products. The result is an interface diagram that supports design teams in communication, decision making and design management. The diagram gives the designer an overview of the couplings and dependencies within a product...... in this article has been conducted in collaboration with Novo Nordisk on the insulin injection device FlexTouch® as case product. The FlexTouch® reflects the characteristics of an integrated product with several functions shared between a relatively low number of parts. In this article we present a novel way...

TEAM 1 Integrated Research Partnerships for Malaria Control ...

International Development Research Centre (IDRC) Digital Library (Canada)

IDRC CRDI

TEAM 1 Integrated Research Partnerships for Malaria Control through an Ecohealth Approach in. East Africa. Abstract: Representing East Africa, the National Institute for Medical Research (NIMR, Tanzania), icipe, the. Kigali Health Institute (Rwanda) and the Kamuli local government district authority in Uganda form.

An exploration of knowledge integration problems in interdisciplinary research teams

NARCIS (Netherlands)

Bayerl, P.S.; Steinheider, B.

2009-01-01

The integration of function-specific expertise into a shared knowledge base is a crucial, but complex process for success in interdisciplinary teams. This paper presents an empirically derived typology of knowledge integration problems and links their occurrence to degree of heterogeneity and

Team engineering for successful reuse and mission enhancement of a former DOE Weapons Material Production Facility

International Nuclear Information System (INIS)

Blackford, L.T.; Mizner, J.H. Jr.

1994-11-01

This paper describes the team engineering approach used to resolve issues associated with converting a 50-year-old fuel processing facility into a decontamination facility. In only nine months, the multi-disciplinary team formed for this task has made significant progress toward both long-term and short-term goals, including conceptual design of two decontamination modules. The team's accomplishments are even more notable in light of frequent changes in scope and mission. Today, the team serves as a venue for troubleshooting operational issues, sharing vendor information, developing long-range strategies, and addressing integration issues within the facility's organizational structure. The team's approach could serve as a useful model to address the many issues surrounding the transition of the U.S. Department of Energy (DOE) and commercial complexes from a production and supply role to one of cleanup and environmental remediation

Implications of intelligent, integrated microsystems for product design and development

International Nuclear Information System (INIS)

MYERS, DAVID R.; MCWHORTER, PAUL J.

2000-01-01

Intelligent, integrated microsystems combine some or all of the functions of sensing, processing information, actuation, and communication within a single integrated package, and preferably upon a single silicon chip. As the elements of these highly integrated solutions interact strongly with each other, the microsystem can be neither designed nor fabricated piecemeal, in contrast to the more familiar assembled products. Driven by technological imperatives, microsystems will best be developed by multi-disciplinary teams, most likely within the flatter, less hierarchical organizations. Standardization of design and process tools around a single, dominant technology will expedite economically viable operation under a common production infrastructure. The production base for intelligent, integrated microsystems has elements in common with the mathematical theory of chaos. Similar to chaos theory, the development of microsystems technology will be strongly dependent on, and optimized to, the initial product requirements that will drive standardization--thereby further rewarding early entrants to integrated microsystem technology

Integrating advanced practice providers into medical critical care teams.

Science.gov (United States)

McCarthy, Christine; O'Rourke, Nancy C; Madison, J Mark

2013-03-01

Because there is increasing demand for critical care providers in the United States, many medical ICUs for adults have begun to integrate nurse practitioners and physician assistants into their medical teams. Studies suggest that such advanced practice providers (APPs), when appropriately trained in acute care, can be highly effective in helping to deliver high-quality medical critical care and can be important elements of teams with multiple providers, including those with medical house staff. One aspect of building an integrated team is a practice model that features appropriate coding and billing of services by all providers. Therefore, it is important to understand an APP's scope of practice, when they are qualified for reimbursement, and how they may appropriately coordinate coding and billing with other team providers. In particular, understanding when and how to appropriately code for critical care services (Current Procedural Terminology [CPT] code 99291, critical care, evaluation and management of the critically ill or critically injured patient, first 30-74 min; CPT code 99292, critical care, each additional 30 min) and procedures is vital for creating a sustainable program. Because APPs will likely play a growing role in medical critical care units in the future, more studies are needed to compare different practice models and to determine the best way to deploy this talent in specific ICU settings.

The Effects of Development Team Skill on Software Product Quality

Science.gov (United States)

Beaver, Justin M.; Schiavone, Guy A.

2006-01-01

This paper provides an analysis of the effect of the skill/experience of the software development team on the quality of the final software product. A method for the assessment of software development team skill and experience is proposed, and was derived from a workforce management tool currently in use by the National Aeronautics and Space Administration. Using data from 26 smallscale software development projects, the team skill measures are correlated to 5 software product quality metrics from the ISO/IEC 9126 Software Engineering Product Quality standard. in the analysis of the results, development team skill is found to be a significant factor in the adequacy of the design and implementation. In addition, the results imply that inexperienced software developers are tasked with responsibilities ill-suited to their skill level, and thus have a significant adverse effect on the quality of the software product. Keywords: software quality, development skill, software metrics

One Team, One Fight, One Future, Total Army Integration

National Research Council Canada - National Science Library

1998-01-01

...; and, most important, our vision for maintaining a trained and ready force. As the ideas in One Team, One Fight, One Future unfold, you will find the key themes of Total Army integration emerging again and again...

Integration of Slack, a cloud-based team collaboration application, into research coordination.

Science.gov (United States)

Gofine, Miriam; Clark, Sunday

2017-06-30

Practitioners of epidemiology require efficient real-time communication and shared access to numerous documents in order to effectively manage a study. Much of this communication involves study logistics and does not require use of Protected Health Information. Slack is a team collaboration app; it archives all direct messages and group conversations, hosts documents internally, and integrates with the Google Docs application. Slack has both desktop and mobile applications, allowing users to communicate in real-time without the need to find email addresses or phone numbers or create contact lists. METHOD: We piloted the integration of Slack into our research team of one faculty member, one research coordinator, and approximately 20 research assistants. Statistics describing the app's usage were calculated twelve months after its implementation. RESULTS: Results indicating heavy usage by both research professionals and assistants are presented. Our Slack group included a cumulative 51 users. Between October 2015 and November 2016, approximately 10,600 messages were sent through Slack; 53% were sent by RA's and 47% were sent by us. Of the 106 files stored on Slack, 82% were uploaded by research staff. In a January 2016 survey, 100% of RA's agreed or strongly agreed that Slack improved communication within the team. CONCLUSION: We demonstrate a model for integration of communication technology into academic activities by research teams. Slack is easily integrated into the workflow at an urban, academic medical center and is adopted by users as a highly effective tool for meeting research teams' communication and document management needs.

Integration of the Nurse Practitioner Into Your Child Abuse Team.

Science.gov (United States)

Herold, Beth; St Claire, Karen; Snider, Scott; Narayan, Aditee

Child maltreatment is a leading cause of childhood morbidity in the United States, often leading to lifelong adverse health consequences. Currently, there is a nationwide shortage of child abuse pediatricians (CAPs), resulting in many unfilled child abuse positions throughout the United States. In addition, the number of future CAPs currently in fellowship training will meet neither the current need for CAPs nor provide replacements for the senior CAPs who will be retiring in the next 5 to 10 years. Although it is recognized that pediatric nurse practitioners (PNPs) play an important role in the care of maltreated children, there are few available data on the impact of the PNP as an integral member of the child abuse team. Using the outcomes logic model, we present a systematic process through which the PNP can be effectively integrated into a medical child abuse team. The outcomes from this process show that the addition of PNPs to the child abuse team not only provides immediate relief to the nationwide CAP shortage but also significantly augments the diverse clinical skills and expertise available to the child abuse team. Copyright © 2018 National Association of Pediatric Nurse Practitioners. Published by Elsevier Inc. All rights reserved.

SolarProTeam - Final report; Solar production technology melts architects

Energy Technology Data Exchange (ETDEWEB)

2010-07-01

To this date, no module manufacturing line has been able to produce special designed multiple function modules or Custom Design Solution (hereafter CDS) modules at costs that are anywhere near the costs of standard modules. The goal of this R and D project was to provide the basis for eliminating the multiplication of costs for specialised modules. The purpose of the SolarProTeam R and D project is to form the foundation of special production equipment and production lay-out in order to realise a cost-effective CDS module production line. The main results derive from research and development of: (1) A number of new module designs corresponding to the special demands of end-users. For instance, black shiny modules with high efficiency; long large black modules with in-built thermal absorbers; flexible high voltage lightweight modules for ground water pumping; large area curved colorful modules with for architecturally advanced buildings; a solar tree for power supply placed along roads and in public places. Module designs are reported. (2) A new general concept 'Q-keys' based on a master plan and specially designed modules integrating both very large and medium sized individual solar plants in the environment of the end-user. I.e., in addition to integration with regard to architectural and environment demands, integration with respect to technical demands are met, such as storage, desalination plants, cooling, mini-grids, the general grid, etc. The Q-keys concept emphasizes the financial issue in that the solar plants are competitive with coal generated electricity and stand-alone diesel generation of electricity. (3) Fully automated production equipment and a semi-automatic module production line, which can mass produce advanced multifunctional and/or architecturally integrated modules at a cost effective price. The equipment and production line were inspired by the functional and technological demands of different types of costumer designed modules. Due

Interprofessional Teamwork and Collaboration Between Community Health Workers and Healthcare Teams: An Integrative Review.

Science.gov (United States)

Franklin, Catherine M; Bernhardt, Jean M; Lopez, Ruth Palan; Long-Middleton, Ellen R; Davis, Sheila

2015-01-01

Community Health Workers (CHWs) serve as a means of improving outcomes for underserved populations. However, their relationship within health care teams is not well studied. The purpose of this integrative review was to examine published research reports that demonstrated positive health outcomes as a result of CHW intervention to identify interprofessional teamwork and collaboration between CHWs and health care teams. A total of 47 studies spanning 33 years were reviewed using an integrative literature review methodology for evidence to support the following assumptions of effective interprofessional teamwork between CHWs and health care teams: (1) shared understanding of roles, norms, values, and goals of the team; (2) egalitarianism; (3) cooperation; (4) interdependence; and(5) synergy. Of the 47 studies, 12 reported at least one assumption of effective interprofessional teamwork. Four studies demonstrated all 5 assumptions of interprofessional teamwork. Four studies identified in this integrative review serve as exemplars for effective interprofessional teamwork between CHWs and health care teams. Further study is needed to describe the nature of interprofessional teamwork and collaboration in relation to patient health outcomes.

An integrative model of knowledge management and team work

Directory of Open Access Journals (Sweden)

Juan A. Marin-Garcia

2008-10-01

Full Text Available Human Resource Management relevance in Knowledge Management has been studied in academic literature mostly from the point of view of recruitment, selection, wages and salaries and career development processes. We have found few publications that are focused in the behaviour of the group of people who generate, share and transfer that knowledge while working in a team. The aim of this paper is to propose a framework that describes the relation between knowledge management and team work,, integrating Nonaka and Takeuchi, Leonard- Barton and Heisig framework proposals, as well as to outline some reflexions for further researches.

76 FR 10403 - Hewlett Packard (HP), Global Product Development, Engineering Workstation Refresh Team, Working...

Science.gov (United States)

2011-02-24

...), Global Product Development, Engineering Workstation Refresh Team, Working On-Site at General Motors..., Non-Information Technology Business Development Team and Engineering Application Support Team, working... Hewlett Packard, Global Product Development, Engineering Workstation Refresh Team, working on-site at...

Integrated Hatchery Operations Team: Policies and Procedures for Columbia Basin Anadromous Salmonid Hatcheries, 1994 Annual Report.

Energy Technology Data Exchange (ETDEWEB)

Integrated Hatchery Operations Team (Northwest Power Planning Council, Portland, OR)

1995-01-01

This document outlines regional policies and procedures for hatchery operations in the Columbia River Basin. The purpose of these policies is to provide regional guidelines by which all anadromous fish hatcheries will be operated. These policies will be adopted by the fisheries co-managers, and will provide guidance to operate hatcheries in an efficient and biologically sound manner. The hatchery policies presented in this manual are not intended to establish production priorities. Rather, the intent is to guide hatchery operations once production numbers are established. Hatchery operations discussed in this report include broodstock collection, spawning, incubation of eggs, fish rearing and feeding, fish release, equipment maintenance and operations, and personnel training. Decisions regarding production priorities must be provided by fishery managers through a comprehensive plan that addresses both natural and hatchery fish production. The Integrated Hatchery Operations Team is a multi-agency group called for by the Northwest Power Planning Council. This team was directed to develop new basinwide policies for managing and operating all existing and future anadromous fish hatcheries in the Columbia River Basin. The parties pledge to confer with each other and to use their authorities and resources to accomplish these mutually acceptable hatchery practices.

Integration of Slack, a cloud-based team collaboration application, into research coordination

Directory of Open Access Journals (Sweden)

Miriam Gofine

2017-06-01

Full Text Available Background: Practitioners of epidemiology require efficient real-time communication and shared access to numerous documents in order to effectively manage a study. Much of this communication involves study logistics and does not require use of Protected Health Information. Slack is a team collaboration app; it archives all direct messages and group conversations, hosts documents internally, and integrates with the Google Docs application. Slack has both desktop and mobile applications, allowing users to communicate in real-time without the need to find email addresses or phone numbers or create contact lists.  Method: We piloted the integration of Slack into our research team of one faculty member, one research coordinator, and approximately 20 research assistants. Statistics describing the app’s usage were calculated twelve months after its implementation.  Results: Results indicating heavy usage by both research professionals and assistants are presented. our Slack group included a cumulative 51 users. Between October 2015 and November 2016, approximately 10,600 messages were sent through Slack; 53% were sent by RA’s and 47% were sent by us. Of the 106 files stored on Slack, 82% were uploaded by research staff. In a January 2016 survey, 100% of RA’s agreed or strongly agreed that Slack improved communication within the team.  Conclusion: We demonstrate a model for integration of communication technology into academic activities by research teams. Slack is easily integrated into the workflow at an urban, academic medical center and is adopted by users as a highly effective tool for meeting research teams’ communication and document management needs.

Investigating the effects of time pressure on new product development teams

NARCIS (Netherlands)

Chong, D.S.F.

2010-01-01

The need for innovation has led high-technology organizations to use project teams as the method of choice to bring new products to market under demanding schedules. Adopting a team approach, however, is not always fruitful and often depends on whether team members can work effectively together.

Intra project team disagreement, conflict communications, and team performance in cross-functional new product teams: A decision-making quality perspective

Directory of Open Access Journals (Sweden)

Tsun Jin Chang

2014-02-01

Full Text Available This paper develops and examines a model of the antecedents and consequences of decision-making comprehensiveness during the new product development process. This model firstly suggests a concave relationship between intrateam task disagreement and decision-making comprehensiveness. It also conjectures that conflict communications influence the effectiveness of decision-making comprehensiveness on new product teams’ performance. An empirical test of the proposed framework involves a survey of 220 cross-functional new product teams. The findings show that an inverse U-shaped relationship exists between intrateam task disagreement and decision-making comprehensiveness. It also indicates that collaborative communication has a negative effect on innovativeness, whereas contentious communication adversely affects constraint adherence. However, decision-making comprehensiveness partially moderates the relationships between conflict communications and team performance. Some managerial and research implications of the findings were also discussed in this study.

A THEORETICAL MODEL OF SOCIO-PSYCHOLOGICAL SUPPORT WORK PROCESSES FOR MANAGEMENT OF PRODUCTION TEAM

Directory of Open Access Journals (Sweden)

Tatyana Gennadevna Pronyushkina

2015-10-01

Full Text Available This article discusses the management of production team, in particular the developed theoretical model of socio-psychological support work processes for management of production team. The author of the research are formulated the purpose and objectives of social-psychological work on management of the production team. Developed in the study a theoretical model aimed at determining the conditions and the identification of features of effective management of the enterprise taking into account the socio-psychological characteristics of its staff. Tasks include: definition of the main characteristics of the production team and their severity, the analysis of these characteristics and identifying opportunities for their transformation, development of recommendations for management of social-psychological work on effects on the characteristics of the collective enterprise.Practical study of the activities of a number of businesses have shown the need to improve socio-psychological support of management processes production team: introducing a social and psychological planning team and develop the practice of sociological research on the state of the team, to ensure the smoothing of relations between workers and management through periodic meetings, creations of conditions for feedback, maintaining healthy competition among team members.

Targeting relationally integrated project teams for sustainable PPPs

OpenAIRE

Kumaraswamy, M. M.; Ling, F. Y. Y.; Anvuur, A. M.; Rahman, M. M.

2007-01-01

Purpose – This paper targets the development of comprehensive approaches to prequalifying teams for Public Private Partnerships (PPPs). Design/methodology/approach – Research outcomes from a study into “relationally integrated project teams” (RIPTs) were applied to necessarily longer-term PPP scenarios. A force field model was developed to visualise the importance of stronger relational forces between the many PPP participants for “sustainable RIPTs” (SRITs). A framework was conceptualised to...

A multi-instructor, team-based, active-learning exercise to integrate basic and clinical sciences content.

Science.gov (United States)

Kolluru, Srikanth; Roesch, Darren M; Akhtar de la Fuente, Ayesha

2012-03-12

To introduce a multiple-instructor, team-based, active-learning exercise to promote the integration of basic sciences (pathophysiology, pharmacology, and medicinal chemistry) and clinical sciences in a doctor of pharmacy curriculum. A team-based learning activity that involved pre-class reading assignments, individual-and team-answered multiple-choice questions, and evaluation and discussion of a clinical case, was designed, implemented, and moderated by 3 faculty members from the pharmaceutical sciences and pharmacy practice departments. Student performance was assessed using a multiple-choice examination, an individual readiness assurance test (IRAT), a team readiness assurance test (TRAT), and a subjective, objective, assessment, and plan (SOAP) note. Student attitudes were assessed using a pre- and post-exercise survey instrument. Students' understanding of possible correct treatment strategies for depression improved. Students were appreciative of this true integration of basic sciences knowledge in a pharmacotherapy course and to have faculty members from both disciplines present to answer questions. Mean student score on the on depression module for the examination was 80.4%, indicating mastery of the content. An exercise led by multiple instructors improved student perceptions of the importance of team-based teaching. Integrated teaching and learning may be achieved when instructors from multiple disciplines work together in the classroom using proven team-based, active-learning exercises.

The effects of diversity faultlines and team task autonomy on decision quality and social integration

NARCIS (Netherlands)

Rico, Ramon; Molleman, Eric; Sanchez-Manzanares, Miriam; Van der Vegt, Gerben S.

This study examines the effects of diversity faultlines stemming from educational background and conscientiousness on team decision quality and social integration and the moderating role of team task autonomy. Using a 2 x 2 (Weak/Strong Faultlines x Low/High Team Task Autonomy) factorial design, 52

Integration: valuing stakeholder input in setting priorities for socially sustainable egg production.

Science.gov (United States)

Swanson, J C; Lee, Y; Thompson, P B; Bawden, R; Mench, J A

2011-09-01

Setting directions and goals for animal production systems requires the integration of information achieved through internal and external processes. The importance of stakeholder input in setting goals for sustainable animal production systems should not be overlooked by the agricultural animal industries. Stakeholders play an integral role in setting the course for many aspects of animal production, from influencing consumer preferences to setting public policy. The Socially Sustainable Egg Production Project (SSEP) involved the development of white papers on various aspects of egg production, followed by a stakeholder workshop to help frame the issues for the future of sustainable egg production. Representatives from the environmental, food safety, food retail, consumer, animal welfare, and the general farm and egg production sectors participated with members of the SSEP coordination team in a 1.5-d workshop to explore socially sustainable egg production. This paper reviews the published literature on values integration methodologies and the lessons learned from animal welfare assessment models. The integration method used for the SSEP stakeholder workshop and its outcome are then summarized. The method used for the SSEP stakeholder workshop can be used to obtain stakeholder input on sustainable production in other farm animal industries.

Integrating CHWs as part of the team leading diabetes group visits: A randomized controlled feasibility study

Science.gov (United States)

The purpose of the study was to evaluate the feasibility of integrating Community Health Workers (CHWs) as part of the team leading diabetes group visits. This was a randomized controlled study that integrated CHWs as part of the team leading diabetes group visits for low-income Hispanic adults (n=5...

Supplier integration in product development: A matter of designing the project structure

Directory of Open Access Journals (Sweden)

Mike Danilovic

2007-11-01

Full Text Available In product development close collaboration between systems integrators and suppliers is important. The purpose of this article is to investigate the impact of the work breakdown structure (WBS and work packages (WPs in product development on the possibility of carrying through the strategy of supplier involvement into collaborative practice and to investigate how supplier involvement can be improved by altering the design of collaborative WBS and WP structures. Dependence Structure Matrix (DSM is introduced in order to analyse, visualise and manage interdependencies, in terms of information exchange between the systems integrator and supplier. This article shows how DSM can support the alternative design of integrated and collaborative WBS and integrated WPs following the logic of dependencies and the flow of information in order to support a strategy focusing on integration of suppliers on project and team level.

Closing service system gaps for homeless clients with a dual diagnosis: integrated teams and interagency cooperation.

Science.gov (United States)

Rosenheck, Robert A; Resnick, Sandra G; Morrissey, Joseph P

2003-06-01

There is great concern about fragmentation of mental health service delivery, especially for dually diagnosed homeless people, and apprehension that such fragmentation adversely affects service access and outcomes. This study first seeks to articulate two alternative approaches to the integration of psychiatric and substance abuse services, one involving an integrated team model and the other a collaborative relationship between agencies. It then applies this conceptualization to a sample of dually diagnosed homeless people who participated in the ACCESS demonstration. Longitudinal outcome data were obtained through interviews at baseline, 3 months, and 12 months with homeless clients with a dual diagnosis (N = 1074) who received ACT-like case management services through the ACCESS demonstration. A survey of ACCESS case managers was conducted to obtain information on: (i) the proportion of clients who received substance abuse services directly from ACCESS case management teams, and the proportion who received services from other agencies; and (ii) the perceived quality of the relationship (i.e. communication, cooperation and trust) between providers--both within the same teams and between agencies. Hierarchical linear modeling was then used to examine the relationship of these two factors to service use and outcome with mixed-model regression analysis. Significant (pintegrated team care is more effective than interagency collaborations. This study broadens the conceptual framework for addressing service system fragmentation by considering both single team integration and interagency coordination, and by considering both program structure and the quality of relationships between providers. Data from a multi-site outcome study demonstrated suggestive associations between perceptions of communication, cooperation and measures of clinical service use. However, the proportion of clients treated entirely within a single team was associated with poorer housing and

Personal Skills, Job Satisfaction, and Productivity in Members of High Performance Teams

Science.gov (United States)

Valdes-Flores, Patricia; Campos-Rodriguez, Javier Arturo

2008-01-01

The intention of the study is to identify the development of personal skills, as well as the increase of job satisfaction and productivity of the employee, as a result of their participation in high performance teams. Volunteered in the study 139 members of self-managed teams belonging to the Production Area, 39 of Operational Administrative…

Evaluation on Collaborative Satisfaction for Project Management Team in Integrated Project Delivery Mode

Science.gov (United States)

Zhang, L.; Li, Y.; Wu, Q.

2013-05-01

Integrated Project Delivery (IPD) is a newly-developed project delivery approach for construction projects, and the level of collaboration of project management team is crucial to the success of its implementation. Existing research has shown that collaborative satisfaction is one of the key indicators of team collaboration. By reviewing the literature on team collaborative satisfaction and taking into consideration the characteristics of IPD projects, this paper summarizes the factors that influence collaborative satisfaction of IPD project management team. Based on these factors, this research develops a fuzzy linguistic method to effectively evaluate the level of team collaborative satisfaction, in which the authors adopted the 2-tuple linguistic variables and 2-tuple linguistic hybrid average operators to enhance the objectivity and accuracy of the evaluation. The paper demonstrates the practicality and effectiveness of the method through carrying out a case study with the method.

Better team management--better team care?

Science.gov (United States)

Shelley, P; Powney, B

1994-01-01

Team building should not be a 'bolt-on' extra, it should be a well planned, integrated part of developing teams and assisting their leaders. When asked to facilitate team building by a group of NHS managers we developed a framework which enabled individual members of staff to become more effective in the way they communicated with each other, their teams and in turn within the organization. Facing the challenge posed by complex organizational changes, staff were able to use 3 training days to increase and develop their awareness of the principles of teamwork, better team management, and how a process of leadership and team building could help yield better patient care.

How do primary health care teams learn to integrate intimate partner violence (IPV) management? A realist evaluation protocol.

Science.gov (United States)

Goicolea, Isabel; Vives-Cases, Carmen; San Sebastian, Miguel; Marchal, Bruno; Kegels, Guy; Hurtig, Anna-Karin

2013-03-23

Despite the existence of ample literature dealing, on the one hand, with the integration of innovations within health systems and team learning, and, on the other hand, with different aspects of the detection and management of intimate partner violence (IPV) within healthcare facilities, research that explores how health innovations that go beyond biomedical issues-such as IPV management-get integrated into health systems, and that focuses on healthcare teams' learning processes is, to the best of our knowledge, very scarce if not absent. This realist evaluation protocol aims to ascertain: why, how, and under what circumstances primary healthcare teams engage (if at all) in a learning process to integrate IPV management in their practices; and why, how, and under what circumstances team learning processes lead to the development of organizational culture and values regarding IPV management, and the delivery of IPV management services. This study will be conducted in Spain using a multiple-case study design. Data will be collected from selected cases (primary healthcare teams) through different methods: individual and group interviews, routinely collected statistical data, documentary review, and observation. Cases will be purposively selected in order to enable testing the initial middle-range theory (MRT). After in-depth exploration of a limited number of cases, additional cases will be chosen for their ability to contribute to refining the emerging MRT to explain how primary healthcare learn to integrate intimate partner violence management. Evaluations of health sector responses to IPV are scarce, and even fewer focus on why, how, and when the healthcare services integrate IPV management. There is a consensus that healthcare professionals and healthcare teams play a key role in this integration, and that training is important in order to realize changes. However, little is known about team learning of IPV management, both in terms of how to trigger such learning

Integrative Student Learning: An Effective Team Learning Activity in a Learner-Centered Paradigm

Directory of Open Access Journals (Sweden)

Reza Karimi

2011-01-01

Full Text Available Purpose: An Integrative Student Learning (ISL activity was developed with the intent to enhance the dynamic of student teamwork and enhance student learning by fostering critical-thinking skills, self-directed learning skills, and active learning. Case Study: The ISL activity consists of three portions: teambuilding, teamwork, and a facilitator driven "closing the loop" feedback discussion. For teambuilding, a set of clue sheets or manufacturer's drug containers were distributed among student pairs who applied their pharmaceutical knowledge to identify two more student pairs with similar clues or drugs, thus building a team of six. For teamwork, each team completed online exams, composed of integrated pharmaceutical science questions with clinical correlates, using only selected online library resources. For the feedback discussion, facilitators evaluated student impressions, opened a discussion about the ISL activity, and provided feedback to teams' impressions and questions. This study describes three different ISL activities developed and implemented over three days with first year pharmacy students. Facilitators' interactions with students and three surveys indicated a majority of students preferred ISL over traditional team activities and over 90% agreed ISL activities promoted active learning, critical-thinking, self-directed learning, teamwork, and student confidence in online library searches. Conclusions: The ISL activity has proven to be an effective learning activity that promotes teamwork and integration of didactic pharmaceutical sciences to enhance student learning of didactic materials and confidence in searching online library resources. It was found that all of this can be accomplished in a short amount of class time with a very reasonable amount of preparation.   Type: Case Study

Uranium Production Safety Assessment Team. UPSAT. An international peer review service for uranium production facilities

International Nuclear Information System (INIS)

1996-01-01

The IAEA Uranium Production Safety Assessment Team (UPSAT) programme is designed to assist Member States to improve the safe operation of uranium production facilities. This programme facilitates the exchange of knowledge and experience between team members and industry personnel. An UPSAT mission is an international expert review, conducted outside of any regulatory framework. The programme is implemented in the spirit of voluntary co-operation to contribute to the enhancement of operational safety and practices where it is most effective, at the facility itself. An UPSAT review supplements other facility and regulatory efforts which may have the same objective

Knowledge sharing in international product development teams

DEFF Research Database (Denmark)

Sonne, Anne-Mette; Harmsen, Hanne

Many companies are facing an increasing need to compete on a global scale. But as companies move into multiple markets, the process of developing new products becomes increasingly complex. Coping successfully with the increased internationalization forces companies to excel at collaboration...... company are far from trivial and the problems associated with transfer will increase with geographical and cultural difference (Bresman et al., 1999). Especially tacit knowledge is difficult to transport across national boarders (Kogut & Zander, 1992) and not much research exists on how companies overcome...... development process is by using teams. Teams are considered one of the best tools for exchanging especially tacit knowledge, since this kind of knowledge is transferred best through personal interaction and face-to-face meetings (Madhavan & Grover, 1998; Nonaka, 1994). In accordance with this, more and more...

Participative Work Design in Lean Production: A Strategy for Dissolving the Paradox between Standardized Work and Team Proactivity by Stimulating Team Learning?

Science.gov (United States)

Lantz, Annika; Hansen, Niklas; Antoni, Conny

2015-01-01

Purpose: The purpose of this paper is to explore job design mechanisms that enhance team proactivity within a lean production system where autonomy is uttermost restricted. We propose and test a model where the team learning process of building shared meaning of work mediates the relationship between team participative decision-making, inter team…

Managing New Product Development Teams in a Globally Dispersed NPD Program

DEFF Research Database (Denmark)

Salomo, Søren; Keinschmidt, Elko J.; de Brentani, Ulrike

2010-01-01

Globalization is a major market trend today, one characterized by both increased international competition as well as extensive opportunities for firms to expand their operations beyond current boundaries. Effectively dealing with this important change, however, makes the management of global new...... resources, team, and performance. For the empirical analysis, data are collected through a survey of 467 corporate global new product programs (North America and Europe, business-to-business). A structural model testing for the hypothesized effects was substantially supported. The results show that creating...... product development (NPD) a major concern. To ensure success in this complex and competitive endeavor, companies must rely on global NPD teams that make use of the talents and knowledge available in different parts of the global organization. Thus, cohesive and well-functioning global NPD teams become...

Requirements of Integrated Design Teams While Evaluating Advanced Energy Retrofit Design Options in Immersive Virtual Environments

Directory of Open Access Journals (Sweden)

Xue Yang

2015-12-01

Full Text Available One of the significant ways to save energy use in buildings is to implement advanced energy retrofits in existing buildings. Improving energy performance of buildings through advanced energy retrofitting requires a clear understanding of the cost and energy implications of design alternatives from various engineering disciplines when different retrofit options are considered. The communication of retrofit design alternatives and their energy implications is essential in the decision-making process, as it affects the final retrofit selections and hence the energy efficiency of the retrofitted buildings. The objective of the research presented here was to identify a generic list of information requirements that are needed to be shared and collectively analyzed by integrated design teams during advanced energy retrofit design review meetings held in immersive settings. While identifying such requirements, the authors used an immersive environment based iterative requirements elicitation approach. The technology was used as a means to better identify the information requirements of integrated design teams to be analyzed as a group. This paper provides findings on information requirements of integrated design teams when evaluating retrofit options in immersive virtual environments. The information requirements were identified through interactions with sixteen experts in design and energy modeling domain, and validated with another group of participants consisting of six design experts who were experienced in integrated design processes. Industry practitioners can use the findings in deciding on what information to share with integrated design team members during design review meetings that utilize immersive virtual environments.

Polyphonic inquiry for team development, learning and knowledge production

DEFF Research Database (Denmark)

Hansen, Lone Hersted; Madsen, Charlotte Øland

2018-01-01

In this chapter we describe how we, as researchers, interacted with practitioners in the field as we co-constructed a polyphonic inquiry for team development, learning and knowledge production, inspired by action research. We build on social constructionist meta-theoretical ideas and write about...... our experience from a constructionist approach to research and social change. Our practice was developed and refined while working together with a team of advisers in an NGO for organic farming and organic food production located in Denmark. In overall terms, and in line with the values...... of the organization, a basic principle of this practice was to think and work in terms of sustainability, environmental care, and social responsibility. We undertake research as a form of social action as described by Sheila McNamee (2010), Sheila McNamee and Dian Marie Hosking (2013), and Kenneth J. Gergen (2015...

Leading Teams of Higher Education Administrators: Integrating Goal Setting, Team Role, and Team Life Cycle Theories

Science.gov (United States)

Posthuma, Richard; Al-Riyami, Said

2012-01-01

Leaders of higher education institutions can create top management teams of academic administrators to guide and improve their organizations. This study illustrates how the leadership of top management teams can be accomplished successfully through a combination of goal setting (Doran, 1981; Locke & Latham, 1990), understanding of team roles…

Associated and Mediating Variables Related to Job Satisfaction among Professionals from Mental Health Teams.

Science.gov (United States)

Fleury, Marie-Josée; Grenier, Guy; Bamvita, Jean-Marie; Chiocchio, François

2018-06-01

Using a structural analysis, this study examines the relationship between job satisfaction among 315 mental health professionals from the province of Quebec (Canada) and a wide range of variables related to provider characteristics, team characteristics, processes, and emergent states, and organizational culture. We used the Job Satisfaction Survey to assess job satisfaction. Our conceptual framework integrated numerous independent variables adapted from the input-mediator-output-input (IMOI) model and the Integrated Team Effectiveness Model (ITEM). The structural equation model predicted 47% of the variance of job satisfaction. Job satisfaction was associated with eight variables: strong team support, participation in the decision-making process, closer collaboration, fewer conflicts among team members, modest knowledge production (team processes), firm affective commitment, multifocal identification (emergent states) and belonging to the nursing profession (provider characteristics). Team climate had an impact on six job satisfaction variables (team support, knowledge production, conflicts, affective commitment, collaboration, and multifocal identification). Results show that team processes and emergent states were mediators between job satisfaction and team climate. To increase job satisfaction among professionals, health managers need to pursue strategies that foster a positive climate within mental health teams.

[Costs with personnel and productivity analysis of family health program teams in Fortaleza, Ceará].

Science.gov (United States)

Rocha Filho, Fernando dos Santos; da Silva, Marcelo Gurgel Carlos

2009-01-01

The research verified the productivity and the operational personnel costs of eight teams of the Family Health Program (PSF) of two Basic Units of Family Health (UBASF) in Fortaleza, Ceará, through the methodology of costs by absorption, in 2004. The largest expenses were with personnel (75%), mainly with the PSF teams, and medicines (18%). The federal allocations received in September, 2004, by each PSF team, were R$ 9,543.33. The total cost by team was R$ 15,719.00. Some professionals of various PSF teams showed productivity above the set objectives, but the average productivity by doctor and nurse was below fifty per cent of objectives, with high idle time making the work onerous. The unity cost of home visits by doctor and prenatal attendance by nurses were checked, and, would be less expensive if the idle time were reduced. Various alternatives of cost reduction were observed, such as scale savings of some resources and services and re-negotiation of contracts with suppliers and cooperatives. The data obtained will contribute to more accurate planning for the installation and maintenance of PSF teams as well as alternatives of cost reductions, higher productivity, and better quality.

The impact of team characteristics and context on team communication: An integrative literature review.

Science.gov (United States)

Tiferes, Judith; Bisantz, Ann M

2018-04-01

Many studies on teams report measures of team communication; however, these studies vary widely in terms of the team characteristics, situations, and tasks studied making it difficult to understand impacts on team communication more generally. The objective of this review is systematically summarize relationships between measures of team communication and team characteristics and situational contexts. A literature review was conducted searching in four electronic databases (PsycINFO, MEDLINE, Ergonomics Abstracts, and SocINDEX). Additional studies were identified by cross-referencing. Articles included for final review had reported at least one team communication measure associated with some team and/or context dimension. Ninety-nine of 727 articles met the inclusion criteria. Data extracted from articles included characteristics of the studies and teams and the nature of each of the reported team and/or context dimensions-team communication properties relationships. Some dimensions (job role, situational stressors, training strategies, cognitive artifacts, and communication media) were found to be consistently linked to changes in team communication. A synthesized diagram that describes the possible associations between eleven team and context dimensions and nine team communication measures is provided along with research needs. Copyright © 2017 Elsevier Ltd. All rights reserved.

Integration of radiation monitoring for nuclear emergency response teams

Energy Technology Data Exchange (ETDEWEB)

Olsen, J T; Thompson, N Y [Royal Military Coll. of Canada, Kingston, ON (Canada)

1994-12-31

The Canadian Forces have established Nuclear Emergency Response Teams to cope with potential radiation accidents. Previously, only gamma and high-energy beta radiation could be detected. Recently, new radiation sampling, detecting, and analytical equipment has been bought, including air samplers, beta counters, high-purity germanium gamma detectors, and multi-channel analyzers together with Gamma Vision Software to analyze gamma spectra. The purpose of the present study is to propose a way to use the new equipment, to analyze the results from the gamma and beta detectors, and to integrate the results into a format for decision making. Integration is achieved through the creation of a computer program, Radiation Integration Program (RIP). This program analyzes gross beta counts, and uses them to estimate danger to the thyroid. As well the results from Gamma Vision are converted from Bq to dose rate for several parts of the body. Overall gamma results affecting the thyroid are compared to the beta results to verify the initial estimations.

Diversity and inequality in management teams : A review and integration of research on vertical and horizontal member differences

NARCIS (Netherlands)

Bunderson, J. Stuart; van der Vegt, Gerben S.

The promise and perils of heterogeneity in team member characteristics has been and continues to be one of the central questions in research on management teams. We review the literature on member heterogeneity within management teams, with a focus on summarizing and integrating research on both

Teams in Education: Creating an Integrated Approach.

Science.gov (United States)

Arcaro, Jerome S.

This handbook is designed to help educational professionals develop cross-functional or departmental quality teams. Nine chapters focus on: (1) the concept of Total Quality Management (TQM) and 14 points for quality in education; (2) team goals and formation; (3) stages of successful team building; (4) the development of quality task teams; (5)…

Lean production teams and health in garment manufacture.

Science.gov (United States)

Jackson, P R; Mullarkey, S

2000-04-01

The impact of lean production on psychological health was assessed by comparing lean production teams in garment manufacture with a traditional system for making similar garments. Work design characteristics were examined as mediators of the impact of work organization on health. Findings indicate both positive and negative direct effects of teamworking on aspects of autonomy, work demands, and social climate. In turn, both positive and negative direct effects of work design on psychological health were found, which combine to give no overall difference between the groups. This study suggests that the balance between positive and negative effects of lean production teamworking depends on management choices in the form of work design.

A Qualitative Study Exploring Moral Distress Among Pediatric Resuscitation Team Clinicians: Challenges to Professional Integrity.

Science.gov (United States)

Thomas, Tessy A; Thammasitboon, Satid; Balmer, Dorene F; Roy, Kevin; McCullough, Laurence B

2016-07-01

Our study objectives were to explore moral distress among pediatric team clinicians within the context of resuscitation experiences, and determine whether there were any distinctively ethical perspectives on moral distress that could be conceptualized as challenges to professional integrity, rather than to previously described psychological responses of clinicians. Descriptive, exploratory qualitative study. A large tertiary pediatric academic hospital in Houston, TX. Twenty-five PICU resuscitation team clinicians were interviewed from December 2012 to April 2013. None. All clinicians reported experiencing moral distress during certain resuscitations. Twenty-one of 25 clinicians reflected and acknowledged that their sense of professional integrity had been challenged during those resuscitation events. Four main components of resuscitation experience that induced moral distress were identified: 1) experiences where there was lack of understanding of the big picture; 2) experiences where there was suboptimal team leadership; 3) experiences where there was variable meanings to the word "resuscitation"; and 4) experiences were there was uncertainty of role responsibility. The perception of moral distress exists among pediatric clinicians during resuscitations and could be conceptualized as challenges to professional integrity. This ethical framework offers an alternative approach to understanding and investigating the complex layers of moral distress.

Distributed team innovation - a framework for distributed product development

OpenAIRE

Larsson, Andreas; Törlind, Peter; Karlsson, Lennart; Mabogunje, Ade; Leifer, Larry; Larsson, Tobias; Elfström, Bengt-Olof

2003-01-01

In response to the need for increased effectivity in global product development, the Polhem Laboratory at Luleå University of Technology, Sweden, and the Center for Design Research at Stanford University, USA, have created the concept of Distributed Team Innovation (DTI). The overall aim of the DTI framework is to decrease the negative impact of geographic distance on product development efforts and to further enhance current advantages of worldwide, multidisciplinary collaboration. The DTI ...

Recommendations for e-learning in New Product Development teams

NARCIS (Netherlands)

Bitter-Rijpkema, Marlies; Pannekeet, Kees; Rutjens, Marjo

2009-01-01

Bitter-Rijpkema, M., Pannekeet, K., & Rutjens, M. (2009). Recommendations for e-learning in New Product Development teams. In S. Hambach, A. Martens, D. Tavangarian & B. Urban (Eds.), Proceedings of the 2nd International eLBa Science Conference (pp. 135-145). June, 17-19, 2009, Rostock, Germany:

An integrated risk assessment tool for team-based periodontal disease management.

Science.gov (United States)

Thyvalikakath, Thankam P; Padman, Rema; Gupta, Sugandh

2013-01-01

Mounting evidence suggests a potential association of periodontal disease with systemic diseases such as diabetes, cardiovascular disease, cancer and stroke. The objective of this study is to develop an integrated risk assessment tool that displays a patients' risk for periodontal disease in the context of their systemic disease, social habits and oral health. Such a tool will be used by not just dental professionals but also by care providers who participate in the team-based care for chronic disease management. Displaying relationships between risk factors and its influence on the patient's general health could be a powerful educational and disease management tool for patients and clinicians. It may also improve the coordination of care provided by the provider-members of a chronic care team.

Understanding the Consequences of Newcomer Integration Processes: The Sport Team Socialization Tactics Questionnaire.

Science.gov (United States)

Benson, Alex J; Eys, Mark

2017-02-01

The ways in which newcomers are integrated into sport teams may have broad consequences for the athletes entering the group, as well as for the existing team members. Drawing from organizational socialization theory, the current research developed a questionnaire to assess athletes' perceptions of how newcomers are socialized into their group. Across four studies, think-aloud interviews (N = 8), an expert panel review (N = 6), cross-sectional tests of the factor structure (N Study 2  = 197; N Study 3  = 460), and a two-wave correlational design (N Study 4  = 194) were used to evaluate the construct validity and the internal consistency of the Sport Team Socialization Tactics Questionnaire (STSTQ). Collectively, these efforts identified a three-factor structure underlying the STSTQ and provided preliminary evidence for its validity. The STSTQ enables researchers to systematically examine the individual- and group-level consequences associated with the socialization tactics implemented in sport teams.

A dynamical approach toward understanding mechanisms of team science: change, kinship, tension, and heritage in a transdisciplinary team.

Science.gov (United States)

Lotrecchiano, Gaetano R

2013-08-01

Since the concept of team science gained recognition among biomedical researchers, social scientists have been challenged with investigating evidence of team mechanisms and functional dynamics within transdisciplinary teams. Identification of these mechanisms has lacked substantial research using grounded theory models to adequately describe their dynamical qualities. Research trends continue to favor the measurement of teams by isolating occurrences of production over relational mechanistic team tendencies. This study uses a social constructionist-grounded multilevel mixed methods approach to identify social dynamics and mechanisms within a transdisciplinary team. A National Institutes of Health-funded research team served as a sample. Data from observations, interviews, and focus groups were qualitatively coded to generate micro/meso level analyses. Social mechanisms operative within this biomedical scientific team were identified. Dynamics that support such mechanisms were documented and explored. Through theoretical and emergent coding, four social mechanisms dominated in the analysis-change, kinship, tension, and heritage. Each contains relational social dynamics. This micro/meso level study suggests such mechanisms and dynamics are key features of team science and as such can inform problems of integration, praxis, and engagement in teams. © 2013 Wiley Periodicals, Inc.

Effectiveness of Teamwork in an Integrated Care Setting for Patients with COPD: Development and Testing of a Self-Evaluation Instrument for Interprofessional Teams.

Science.gov (United States)

Van Dijk-de Vries, Anneke N; Duimel-Peeters, Inge G P; Muris, Jean W; Wesseling, Geertjan J; Beusmans, George H M I; Vrijhoef, Hubertus J M

2016-04-08

Teamwork between healthcare providers is conditional for the delivery of integrated care. This study aimed to assess the usefulness of the conceptual framework Integrated Team Effectiveness Model for developing and testing of the Integrated Team Effectiveness Instrument. Focus groups with healthcare providers in an integrated care setting for people with chronic obstructive pulmonary disease (COPD) were conducted to examine the recognisability of the conceptual framework and to explore critical success factors for collaborative COPD practice out of this framework. The resulting items were transposed into a pilot instrument. This was reviewed by expert opinion and completed 153 times by healthcare providers. The underlying structure and internal consistency of the instrument were verified by factor analysis and Cronbach's alpha. The conceptual framework turned out to be comprehensible for discussing teamwork effectiveness. The pilot instrument measures 25 relevant aspects of teamwork in integrated COPD care. Factor analysis suggested three reliable components: teamwork effectiveness, team processes and team psychosocial traits (Cronbach's alpha between 0.76 and 0.81). The conceptual framework Integrated Team Effectiveness Model is relevant in developing a practical full-spectrum instrument to facilitate discussing teamwork effectiveness. The Integrated Team Effectiveness Instrument provides a well-founded basis to self-evaluate teamwork effectiveness in integrated COPD care by healthcare providers. Recommendations are provided for the improvement of the instrument.

Effectiveness of Teamwork in an Integrated Care Setting for Patients with COPD: Development and Testing of a Self-Evaluation Instrument for Interprofessional Teams

Directory of Open Access Journals (Sweden)

Anneke N Van Dijk-de Vries

2016-04-01

Full Text Available Introduction: Teamwork between healthcare providers is conditional for the delivery of integrated care. This study aimed to assess the usefulness of the conceptual framework Integrated Team Effectiveness Model for developing and testing of the Integrated Team Effectiveness Instrument. Theory and methods: Focus groups with healthcare providers in an integrated care setting for people with chronic obstructive pulmonary disease (COPD were conducted to examine the recognisability of the conceptual framework and to explore critical success factors for collaborative COPD practice out of this framework. The resulting items were transposed into a pilot instrument. This was reviewed by expert opinion and completed 153 times by healthcare providers. The underlying structure and internal consistency of the instrument were verified by factor analysis and Cronbach’s alpha. Results: The conceptual framework turned out to be comprehensible for discussing teamwork effectiveness. The pilot instrument measures 25 relevant aspects of teamwork in integrated COPD care. Factor analysis suggested three reliable components: teamwork effectiveness, team processes and team psychosocial traits (Cronbach’s alpha between 0.76 and 0.81. Conclusions and discussion: The conceptual framework Integrated Team Effectiveness Model is relevant in developing a practical full-spectrum instrument to facilitate discussing teamwork effectiveness. The Integrated Team Effectiveness Instrument provides a well-founded basis to self-evaluate teamwork effectiveness in integrated COPD care by healthcare providers. Recommendations are provided for the improvement of the instrument.

TEAMS Model for the HPGF LN2 Pump System Diagnostic Utility

Data.gov (United States)

National Aeronautics and Space Administration — The Testability, Engineering, and Maintenance Systems (TEAMS) Product Suite developed by Qualtech Systems Inc. has been adopted across NASA for integrating...

Integrative Student Learning: An Effective Team Learning Activity in a Learner-Centered Paradigm

Directory of Open Access Journals (Sweden)

Reza Karimi, RPh, PhD

2011-01-01

Full Text Available Purpose: An Integrative Student Learning (ISL activity was developed with the intent to enhance the dynamic of student teamwork and enhance student learning by fostering critical-thinking skills, self-directed learning skills, and active learning. Case Study: The ISL activity consists of three portions: teambuilding, teamwork, and a facilitator driven “closing the loop” feedback discussion. For teambuilding, a set of clue sheets or manufacturer‘s drug containers were distributed among student pairs who applied their pharmaceutical knowledge to identify two more student pairs with similar clues or drugs, thus building a team of six. For teamwork, each team completed online exams, composed of integrated pharmaceutical science questions with clinical correlates, using only selected online library resources. For the feedback discussion, facilitators evaluated student impressions, opened a discussion about the ISL activity, and provided feedback to teams’ impressions and questions. This study describes three different ISL activities developed and implemented over three days with first year pharmacy students. Facilitators’ interactions with students and three surveys indicated a majority of students preferred ISL over traditional team activities and over 90% agreed ISL activities promoted active learning, critical-thinking, self-directed learning, teamwork, and student confidence in online library searches. Conclusions: The ISL activity has proven to be an effective learning activity that promotes teamwork and integration of didactic pharmaceutical sciences to enhance student learning of didactic materials and confidence in searching online library resources. It was found that all of this can be accomplished in a short amount of class time with a very reasonable amount of preparation.

Behavioral integrity for safety, priority of safety, psychological safety, and patient safety : a team-level study

NARCIS (Netherlands)

Leroy, H.; Dierynck, B.; Anseel, F.; Simons, T.; Halbesleben, J.R.; McCaughey, D.; Savage, G.T.; Sels, L.

2012-01-01

This article clarifies how leader behavioral integrity for safety helps solve follower's double bind between adhering to safety protocols and speaking up about mistakes against protocols. Path modeling of survey data in 54 nursing teams showed that head nurse behavioral integrity for safety

Team Scaffolds: How Minimal Team Structures Enable Role-based Coordination

OpenAIRE

Valentine, Melissa A

2013-01-01

In this dissertation, I integrate research on role-based coordination with concepts adapted from the team effectiveness literature to theorize how minimal team structures support effective coordination when people do not work together regularly. I argue that role-based coordination among relative strangers can be interpersonally challenging and propose that team scaffolds (minimal team structures that bound groups of roles rather than groups of individuals) may provide occupants with a tempor...

Teaching nurses teamwork: Integrative review of competency-based team training in nursing education.

Science.gov (United States)

Barton, Glenn; Bruce, Anne; Schreiber, Rita

2017-12-20

Widespread demands for high reliability healthcare teamwork have given rise to many educational initiatives aimed at building team competence. Most effort has focused on interprofessional team training however; Registered Nursing teams comprise the largest human resource delivering direct patient care in hospitals. Nurses also influence many other health team outcomes, yet little is known about the team training curricula they receive, and furthermore what specific factors help translate teamwork competency to nursing practice. The aim of this review is to critically analyse empirical published work reporting on teamwork education interventions in nursing, and identify key educational considerations enabling teamwork competency in this group. CINAHL, Web of Science, Academic Search Complete, and ERIC databases were searched and detailed inclusion-exclusion criteria applied. Studies (n = 19) were selected and evaluated using established qualitative-quantitative appraisal tools and a systematic constant comparative approach. Nursing teamwork knowledge is rooted in High Reliability Teams theory and Crew or Crisis Resource Management sources. Constructivist pedagogy is used to teach, practice, and refine teamwork competency. Nursing teamwork assessment is complex; involving integrated yet individualized determinations of knowledge, skills, and attitudes. Future initiatives need consider frontline leadership, supportive followership and skilled communication emphasis. Collective stakeholder support is required to translate teamwork competency into nursing practice. Copyright © 2017 Elsevier Ltd. All rights reserved.

Integrated Project Teams - An Essential Element of Project Management during Project Planning and Execution - 12155

Energy Technology Data Exchange (ETDEWEB)

Burritt, James G.; Berkey, Edgar [Longenecker and Associates, Las Vegas, NV 89135 (United States)

2012-07-01

Managing complex projects requires a capable, effective project manager to be in place, who is assisted by a team of competent assistants in various relevant disciplines. This team of assistants is known as the Integrated Project Team (IPT). he IPT is composed of a multidisciplinary group of people who are collectively responsible for delivering a defined project outcome and who plan, execute, and implement over the entire life-cycle of a project, which can be a facility being constructed or a system being acquired. An ideal IPT includes empowered representatives from all functional areas involved with a project-such as engineering design, technology, manufacturing, test and evaluation, contracts, legal, logistics, and especially, the customer. Effective IPTs are an essential element of scope, cost, and schedule control for any complex, large construction project, whether funded by DOE or another organization. By recently assessing a number of major, on-going DOE waste management projects, the characteristics of high performing IPTs have been defined as well as the reasons for potential IPT failure. Project managers should use IPTs to plan and execute projects, but the IPTs must be properly constituted and the members capable and empowered. For them to be effective, the project manager must select the right team, and provide them with the training and guidance for them to be effective. IPT members must treat their IPT assignment as a primary duty, not some ancillary function. All team members must have an understanding of the factors associated with successful IPTs, and the reasons that some IPTs fail. Integrated Project Teams should be used by both government and industry. (authors)

The power of product integrity.

Science.gov (United States)

Clark, K B; Fujimoto, T

1990-01-01

In the dictionary, integrity means wholeness, completeness, soundness. In products, integrity is the source of sustainable competitive advantage. Products with integrity perform superbly, provide good value, and satisfy customers' expectations in every respect, including such intangibles as their look and feel. Consider this example from the auto industry. In 1987, Mazda put a racy four-wheel steering system in a five-door family hatchback. Honda introduced a comparable system in the Prelude, a sporty, two-door coupe. Most of Honda's customers installed the new technology; Mazda's system sold poorly. Potential customers felt the fit--or misfit--between the car and the new component, and they responded accordingly. Companies that consistently develop products with integrity are coherent, integrated organizations. This internal integrity is visible at the level of strategy and structure, in management and organization, and in the skills, attitudes, and behavior of individual designers, engineers, and operators. Moreover, these companies are integrated externally: customers become part of the development organization. Integrity starts with a product concept that describes the new product from the potential customer's perspective--"pocket rocket" for a sporty, subcompact car, for example. Whether the final product has integrity will depend on two things: how well the concept satisfies potential customers' wants and needs and how completely the concept has been embodied in the product's details. In the most successful development organizations, "heavyweight" product managers are responsible for leading both tasks, as well as for guiding the creation of a strong product concept.

Conditions for the Successful Implementation of Teacher Educator Design Teams for ICT Integration: A Delphi Study

Science.gov (United States)

Becuwe, Heleen; Roblin, Natalie Pareja; Tondeur, Jo; Thys, Jeroen; Castelein, Els; Voogt, Joke

2017-01-01

Teacher educators often struggle to model effective integration of technology. Several studies suggest that the involvement of teacher educators in collaborative design is effective in developing the competences necessary for integrating information and communication technology (ICT) in teaching. In a teacher educator design team (TeDT), two or…

The impact of structural and contextual factors on trust formation in product development teams

NARCIS (Netherlands)

Dayan, M.; Benedetto, Di A.C.

2010-01-01

This study examines antecedents of trust formation in new product development (NPD) teams and the effects of trust on NPD team performance. A theoretical framework relating structural and contextual factors to interpersonal trust and project outcomes was built, including task complexity as a

Longitudinal observations of globally distributed design teams: The impacts on Product Development

DEFF Research Database (Denmark)

Taylor, Thomas Paul; Ahmed-Kristensen, Saeema

2015-01-01

Factors impacting the success of Product Development (PD) projects are intensified when teams are distributed globally, making it a challenging task for project management to deal with effects on time, cost and quality. It is important for project management to understand when challenges......, such as communication difficulties, a lack of common vision between team members or issues related to documentation, may occur during PD projects, enabling them to take the necessary preventative action (Edmondson and Nembhard, 2009). When investigating factors impacting the success of PD, the majority of research...... studies of globally distributed design teams in PD projects. This paper aims to contribute to the further understanding of the factors impacting the success of PD projects when teams are distributed globally. With the results from a longitudinal observational study over 8 months, the factors impacting...

A double-edged sword: the effects of challenge and hindrance time pressure on new product development teams

NARCIS (Netherlands)

Chong, D.S.F.; van Eerde, W.; Chai, K.H.; Rutte, C.G.

2011-01-01

Bringing new products to market requires team effort. New product development teams often face demanding schedules and high deliverable expectations, making time pressure a common experience at the workplace. Past literature have generally associated the relationship between time pressure and

Managing a Product Development Team

Science.gov (United States)

Lehtonen, Kenneth E.; Barrett, Larry

2003-01-01

Orbiting 380 miles above the earth, NASA s Hubble Space Telescope (HST) has returned a wealth of scientific data about our universe and galaxies beyond highlighted by spectacular images of the birth and death of stars, colliding galaxies, and other extra-worldly events. Despite its tremendous success for almost two decades, the HST ground support system experienced down-to-earth problems prior to the turn of the century, namely budgetary ones. To keep HST operating efficiently to 201 2 and beyond, the Vision 2000 project was conceived with the primary goal of substantially reducing the costs of operating and maintaining the spacecraft ground systems. Taking advantage of this atypical management opportunity, a set of Product Development Teams (PDTs) were established, whose charter was to re-engineer the ground system, and in doing so, reduce the remaining life-of-mission operating and maintenance costs, while providing improved reliability and increased capabilities.

Extended integration the key to future productivity leap

International Nuclear Information System (INIS)

Peebler, R.P.

1996-01-01

This paper reviews the economic benefits and trends in integration of information technology. The paper assesses the historical technologies of simple structure interpretation to complex three- and four-dimensional simulation. It presents historical methods of collecting and analyzing data and a hierarchy of integration that has developed. It shows the economic benefits of integrating computer data bases with multidisciplinary teams to engineer and monitor oil and gas depletion

Development of an Integrated Team Training Design and Assessment Architecture to Support Adaptability in Healthcare Teams

Science.gov (United States)

2017-10-01

provision of training is not a major focus of this project, trainees were able to practice trauma management skills as well as leadership skills...SUBJECT TERMS Military healthcare team; Trauma teams; Team training; Teamwork; Adaptive performance; Leadership ; Simulation; Modeling; Bayesian belief...ABBREVIATIONS Healthcare team Trauma Trauma teams Team training Teamwork Adaptability Adaptive performance Leadership Simulation Modeling

NIMROD: A Customer Focused, Team Driven Approach for Fusion Code Development

Science.gov (United States)

Karandikar, H. M.; Schnack, D. D.

1996-11-01

NIMROD is a new code that will be used for the analysis of existing fusion experiments, prediction of operational limits, and design of future devices. An approach called Integrated Product Development (IPD) is being used for the development of NIMROD. It is a dramatic departure from existing practice in the fusion program. Code development is being done by a self-directed, multi-disciplinary, multi-institutional team that consists of experts in plasma theory, experiment, computational physics, and computer science. Customer representatives (ITER, US experiments) are an integral part of the team. The team is using techniques such as Quality Function Deployment (QFD), Pugh Concept Selection, Rapid Prototyping, and Risk Management, during the design phase of NIMROD. Extensive use is made of communication and internet technology to support collaborative work. Our experience with using these team techniques for such a complex software development project will be reported.

The effects of team expert choice on group decision-making in collaborative new product development; a pilot study

NARCIS (Netherlands)

Hummel, J. Marjan; van Rossum, Wouter; Verkerke, Gijsbertus Jacob; Rakhorst, G.

2000-01-01

This study analyses the effects of Team Expert Choice on group decision-making in collaborative new product development. We applied Team Expert Choice to support a product evaluation conducted by a new product development group composed of professionally diverse members. The evaluation resulted in

“Team Building: Proven Strategies for Improving Team Performance, 4th Edition”

Directory of Open Access Journals (Sweden)

Greg Homan

2008-12-01

Full Text Available Team Building is an important issue for Youth Development professionals. We utilize team-focused work to achieve our objectives in educating youth. The team building skills we integrate into programming serve to prepare youth for the dynamic, highly interpersonal work environment of today. “Team Building: Proven Strategies for Improving Team Performance, 4th Edition,” by W. Dyer, W.G. Dyer, and J. Dyer (2007, provides a practical theoretical framework for those interested in team building application, training, and practice in everyday work.

Integrating technical and non-technical skills coaching in an acute trauma surgery team training: Is it too much?

Science.gov (United States)

Alken, Alexander; Luursema, Jan-Maarten; Weenk, Mariska; Yauw, Simon; Fluit, Cornelia; van Goor, Harry

2017-08-25

Research on effective integration of technical and non-technical skills in surgery team training is sparse. In a previous study we found that surgical teachers predominantly coached on technical and hardly on non-technical skills during the Definitive Surgical and Anesthetic Trauma Care (DSATC) integrated acute trauma surgery team training. This study aims to investigate whether the priming of teachers could increase the amount of non-technical skills coaching during such a training. Coaching activities of 12 surgical teachers were recorded on audio and video. Six teachers were primed on non-technical skills coaching prior to the training. Six others received no priming and served as controls. Blind observers reviewed the recordings of 2 training scenario's and scored whether the observed behaviors were directed on technical or non-technical skills. We compared the frequency of the non-technical skills coaching between the primed and the non-primed teachers and analyzed for differences according to the trainees' level of experience. Surgical teachers coached trainees during the highly realistic DSATC integrated acute trauma surgery team training. Trainees performed damage control surgery in operating teams on anesthetized porcine models during 6 training scenario's. Twelve experienced surgical teachers participated in this study. Coaching on non-technical skills was limited to about 5%. The primed teachers did not coach more often on non-technical skills than the non-primed teachers. We found no differences in the frequency of non-technical skills coaching based on the trainees' level of experience. Priming experienced surgical teachers does not increase the coaching on non-technical skills. The current DSATC acute trauma surgery team training seems too complex for integrating training on technical and non-technical skills. Patient care, Practice based learning and improvement. Copyright © 2017 Elsevier Inc. All rights reserved.

Integrating ergonomics into production system development--the Volvo Powertrain case.

Science.gov (United States)

Neumann, W Patrick; Ekman, Marianne; Winkel, Jørgen

2009-05-01

Understanding the barriers and assists to integrating ergonomics into production system design remains a research issue. An action research case study at Volvo Powertrain/Sweden was conducted. Researchers worked collaboratively with the firm in efforts to improve the company's ability to handle ergonomics in their daily work of improving and developing production systems. Researchers observed and reflected collectively on the change process using field notes and recordings to support their observations. Observed integration barriers included both individual level issues like life events, and organisational aspects such as communication barriers between groups or assignment of tasks to people not involved in decision-making. Observed assists included the 'political reflective navigation' (c.f. Broberg, O., Hermund, I., 2004. The OHS consultant as a 'political reflective navigator' in technological change processes. International Journal of Industrial Ergonomics 33 (4), 315-326) by the project owner to find new ways to overcome barriers and anchor ergonomics into the organisation. While special 'ergonomics' groups did not survive long, progress was observed in including ergonomics in regular design groups. A cross-functional workshop that fostered discussion across organisational boundaries helped shift focus from retrofitting systems to future production systems and improve engagement of engineering teams. Progress was marked by both success and setbacks and full integration appears to require more than 2 years time. It is concluded that support by senior managers should include succession planning for personnel that are key to the change effort.

Cohesion, team mental models, and collective efficacy: towards an integrated framework of team dynamics in sport.

Science.gov (United States)

Filho, Edson; Tenenbaum, Gershon; Yang, Yanyun

2015-01-01

A nomological network on team dynamics in sports consisting of a multiframework perspective is introduced and tested. The aim was to explore the interrelationship among cohesion, team mental models (TMMs), collective efficacy (CE) and perceived performance potential (PPP). Three hundred and forty college-aged soccer players representing 17 different teams (8 female and 9 male) participated in the study. They responded to surveys on team cohesion, TMMs, CE and PPP. Results are congruent with the theoretical conceptualisation of a parsimonious view of team dynamics in sports. Specifically, cohesion was found to be an exogenous variable predicting both TMMs and CE beliefs. TMMs and CE were correlated and predicted PPP, which in turn accounted for 59% of the variance of objective performance scores as measured by teams' season record. From a theoretical standpoint, findings resulted in a parsimonious view of team dynamics, which may represent an initial step towards clarifying the epistemological roots and nomological network of various team-level properties. From an applied standpoint, results suggest that team expertise starts with the establishment of team cohesion. Following the establishment of cohesiveness, teammates are able to advance team-related schemas and a collective sense of confidence. Limitations and key directions for future research are outlined.

Experiences of multidisciplinary development team members during user-centered design of telecare products and services: a qualitative study.

Science.gov (United States)

Vermeulen, Joan; Verwey, Renée; Hochstenbach, Laura M J; van der Weegen, Sanne; Man, Yan Ping; de Witte, Luc P

2014-05-19

User-centered design (UCD) methodologies can help take the needs and requirements of potential end-users into account during the development of innovative telecare products and services. Understanding how members of multidisciplinary development teams experience the UCD process might help to gain insight into factors that members with different backgrounds consider critical during the development of telecare products and services. The primary objective of this study was to explore how members of multidisciplinary development teams experienced the UCD process of telecare products and services. The secondary objective was to identify differences and similarities in the barriers and facilitators they experienced. Twenty-five members of multidisciplinary development teams of four Research and Development (R&D) projects participated in this study. The R&D projects aimed to develop telecare products and services that can support self-management in elderly people or patients with chronic conditions. Seven participants were representatives of end-users (elderly persons or patients with chronic conditions), three were professional end-users (geriatrician and nurses), five were engineers, four were managers (of R&D companies or engineering teams), and six were researchers. All participants were interviewed by a researcher who was not part of their own development team. The following topics were discussed during the interviews: (1) aim of the project, (2) role of the participant, (3) experiences during the development process, (4) points of improvement, and (5) what the project meant to the participant. Experiences of participants related to the following themes: (1) creating a development team, (2) expectations regarding responsibilities and roles, (3) translating user requirements into technical requirements, (4) technical challenges, (5) evaluation of developed products and services, and (6) valorization. Multidisciplinary team members from different backgrounds often

Leadership by Confidence in Teams

OpenAIRE

Kobayashi, Hajime; Suehiro, Hideo

2008-01-01

We study endogenous signaling by analyzing a team production problem with endogenous timing. Each agent of the team is privately endowed with some level of confidence about team productivity. Each of them must then commit a level of effort in one of two periods. At the end of each period, each agent observes his partner' s move in this period. Both agents are rewarded by a team output determined by team productivity and total invested effort. Each agent must personally incur the cost of effor...

Game analysis of product-service integration

Directory of Open Access Journals (Sweden)

Heping Zhong

2014-10-01

Full Text Available Purpose: This paper aims at defining the value creation mechanism and income distribution strategies of product-service integration in order to promote product-service integration of a firm.Design/methodology/approach: This paper conducts researches quantitatively on the coordination mechanism of product-service integration by using game theory, and uses the methods of Shapley value and Equal growth rate to further discuss income distribution strategies of product-service integration.Findings: Product-service integration increases the total income of a firm and the added value of the income decreases as the unit price demand variation coefficient of products and services increases, while decreases as the marginal cost of products increases, decreases as the marginal cost of services increases. Moreover, the findings suggest that both income distribution strategies of product-service integration based on Shapley value method and Equal growth rate method can make the product department and service department of a firm win-win and realize the pareto improvement. The choice of what kind of distribution strategy to coordinate the actions between departments depends on the department playing dominant role in the firm. Generally speaking, for a firm at the center of market, when the product department is the main contributor to firm income, the service department will choose the income distribution strategy of product-service integration based on Shapley value method; when the service department is the main contributor to firm income, the service department will choose the income distribution strategy of product-service integration based on Equal growth rate method.Research limitations/implications: This paper makes some strict assumptions such as complete information, risk neutral, linear cost function and so on and the discussion is limited to the simple relationship between product department and service department.Practical implications: Product

DIFFERENT DIMENSIONS OF TEAMS

OpenAIRE

Goparaju Purna SUDHAKAR

2013-01-01

Popularity of teams is growing in 21st Century. Organizations are getting their work done through different types of teams. Teams have proved that the collective performance is more than the sum of the individual performances. Thus, the teams have got different dimensions such as quantitative dimensions and qualitative dimensions. The Quantitative dimensions of teams such as team performance, team productivity, team innovation, team effectiveness, team efficiency, team decision making and tea...

Integrative production technology theory and applications

CERN Document Server

Özdemir, Denis

2017-01-01

This contributed volume contains the research results of the Cluster of Excellence “Integrative Production Technology for High-Wage Countries”, funded by the German Research Society (DFG). The approach to the topic is genuinely interdisciplinary, covering insights from fields such as engineering, material sciences, economics and social sciences. The book contains coherent deterministic models for integrative product creation chains as well as harmonized cybernetic models of production systems. The content is structured into five sections: Integrative Production Technology, Individualized Production, Virtual Production Systems, Integrated Technologies, Self-Optimizing Production Systems and Collaboration Productivity.The target audience primarily comprises research experts and practitioners in the field of production engineering, but the book may also be beneficial for graduate students. .

The cohesiveness of sourcing teams

DEFF Research Database (Denmark)

Lidegaard, Nina

2015-01-01

Sourcing teams are introduced as an approach to achieving the interdepartmental integration necessary for companies to address the complexity of strategic sourcing. Companies aim at facilitating teams capable of balancing the goals and tasks of the team with departmental expectations; however...

Creating Teams Increases Extension Educator Productivity

Science.gov (United States)

Chalker-Scott, Linda; Daniels, Catherine H.; Martini, Nicole

2016-01-01

The Garden Team at Washington State University is a transdisciplinary group of faculty, staff, and students with expertise in applied plant and soil sciences and an interest in Extension education. The team's primary mission is to create current, relevant, and peer-reviewed materials as Extension publications for home gardeners. The average yearly…

The theory of inventive problem solving integrated to the cleaner production: theoretical approach

Directory of Open Access Journals (Sweden)

Flávio Issao Kubota

2013-03-01

Full Text Available Efforts towards to reduction of environmental impact by enterprises are a solving problem process, which often need inventive solutions that generate environmental, technical and economic benefits. Hence, this research aimed to verify, through literature, and discuss the Theory of Inventive Problem Solving (TRIZ integration to cleaner production (CP strategies, in order to structure a new methodology for inventive solutions focused on reduction of effluents, waste and emissions. To perform this study, we proceeded a qualitative and descriptive research, with documentary data collection strategy. The results show predominance of CP level 1 researches, with greater focus on product improvement, a smaller quantity of process modification studies (level 1 and internal recycling (level 2, and no evidence of TRIZ utilization was obtained on level 3 (external recycling and biogenic cycles. The proposed integration is promising, since both methodologies aim ideal situation and problems’ reduction. At the end, opportunities were detected for application of TRIZ in production processes, by means of functional analysis and Ideal Final Result (IFR, being possible to direct teams towards optimization of technical systems.

An Integrated, Multifactorial Approach to Periodization for Optimal Performance in Individual and Team Sports.

Science.gov (United States)

Mujika, Iñigo; Halson, Shona; Burke, Louise M; Balagué, Gloria; Farrow, Damian

2018-05-01

Sports periodization has traditionally focused on the exercise aspect of athletic preparation, while neglecting the integration of other elements that can impact an athlete's readiness for peak competition performances. Integrated periodization allows the coordinated inclusion of multiple training components best suited for a given training phase into an athlete's program. The aim of this article is to review the available evidence underpinning integrated periodization, focusing on exercise training, recovery, nutrition, psychological skills, and skill acquisition as key factors by which athletic preparation can be periodized. The periodization of heat and altitude adaptation, body composition, and physical therapy is also considered. Despite recent criticism, various methods of exercise training periodization can contribute to performance enhancement in a variety of elite individual and team sports, such as soccer. In the latter, both physical and strategic periodization are useful tools for managing the heavy travel schedule, fatigue, and injuries that occur throughout a competitive season. Recovery interventions should be periodized (ie, withheld or emphasized) to influence acute and chronic training adaptation and performance. Nutrient intake and timing in relation to exercise and as part of the periodization of an athlete's training and competition calendar can also promote physiological adaptations and performance capacity. Psychological skills are a central component of athletic performance, and their periodization should cater to each athlete's individual needs and the needs of the team. Skill acquisition can also be integrated into an athlete's periodized training program to make a significant contribution to competition performance.

Managing Biases in Product Development Teams: A Tale of Two Rocks

Science.gov (United States)

Keene, Michael A.

2017-01-01

The management of product development teams is a challenging task, especially when success hinges on the ability to guide technical and nontechnical personnel through an effective decision-making process. The "Tale of Two Rocks" exercise illustrates how differing motivations and beliefs about new technologies can affect the decisions…

Integration of motors and drives

Energy Technology Data Exchange (ETDEWEB)

Jackson, D.C. [Brook Hansen (United Kingdom)

2000-07-01

This paper examines the benefits of adopting a second-generation integrated motor and inverter. Removing the barriers to ensure that variable speed drives are more readily applied results in on-going cost savings to the user through energy savings plus process control benefits. In addition, the use of an integrated product instead of two separate components results in cost and time-savings to the installer. The simplification of integration, by transferring the guarantees of performance in efficiency, torque overload and stiffness, speed accuracy, noise and EMC compliance, allows optimisation by the design team to be realised by users and ease of application since the primary design team guarantees the product performance. The introduction of second generation compact product assists user conversion from present inefficient mechanical solutions. This technology is currently applicable in power ratings below 22 kW, which includes the vast majority of practical applications. (orig.)

Teams as innovative systems: multilevel motivational antecedents of innovation in R&D teams.

Science.gov (United States)

Chen, Gilad; Farh, Jiing-Lih; Campbell-Bush, Elizabeth M; Wu, Zhiming; Wu, Xin

2013-11-01

Integrating theories of proactive motivation, team innovation climate, and motivation in teams, we developed and tested a multilevel model of motivators of innovative performance in teams. Analyses of multisource data from 428 members of 95 research and development (R&D) teams across 33 Chinese firms indicated that team-level support for innovation climate captured motivational mechanisms that mediated between transformational leadership and team innovative performance, whereas members' motivational states (role-breadth self-efficacy and intrinsic motivation) mediated between proactive personality and individual innovative performance. Furthermore, individual motivational states and team support for innovation climate uniquely promoted individual innovative performance, and, in turn, individual innovative performance linked team support for innovation climate to team innovative performance. (c) 2013 APA, all rights reserved.

Team dynamics within quality improvement teams: a scoping review.

Science.gov (United States)

Rowland, Paula; Lising, Dean; Sinclair, Lynne; Baker, G Ross

2018-03-31

This scoping review examines what is known about the processes of quality improvement (QI) teams, particularly related to how teams impact outcomes. The aim is to provide research-informed guidance for QI leaders and to inform future research questions. Databases searched included: MedLINE, EMBASE, CINAHL, Web of Science and SCOPUS. Eligible publications were written in English, published between 1999 and 2016. Articles were included in the review if they examined processes of the QI team, were related to healthcare QI and were primary research studies. Studies were excluded if they had insufficient detail regarding QI team processes. Descriptive detail extracted included: authors, geographical region and health sector. The Integrated (Health Care) Team Effectiveness Model was used to synthesize findings of studies along domains of team effectiveness: task design, team process, psychosocial traits and organizational context. Over two stages of searching, 4813 citations were reviewed. Of those, 48 full-text articles are included in the synthesis. This review demonstrates that QI teams are not immune from dysfunction. Further, a dysfunctional QI team is not likely to influence practice. However, a functional QI team alone is unlikely to create change. A positive QI team dynamic may be a necessary but insufficient condition for implementing QI strategies. Areas for further research include: interactions between QI teams and clinical microsystems, understanding the role of interprofessional representation on QI teams and exploring interactions between QI team task, composition and process.

How do leader-member exchange quality and differentiation affect performance in teams? An integrated multilevel dual process model.

Science.gov (United States)

Li, Alex Ning; Liao, Hui

2014-09-01

Integrating leader-member exchange (LMX) research with role engagement theory (Kahn, 1990) and role system theory (Katz & Kahn, 1978), we propose a multilevel, dual process model to understand the mechanisms through which LMX quality at the individual level and LMX differentiation at the team level simultaneously affect individual and team performance. With regard to LMX differentiation, we introduce a new configural approach focusing on the pattern of LMX differentiation to complement the traditional approach focusing on the degree of LMX differentiation. Results based on multiphase, multisource data from 375 employees of 82 teams revealed that, at the individual level, LMX quality positively contributed to customer-rated employee performance through enhancing employee role engagement. At the team level, LMX differentiation exerted negative influence on teams' financial performance through disrupting team coordination. In particular, teams with the bimodal form of LMX configuration (i.e., teams that split into 2 LMX-based subgroups with comparable size) suffered most in team performance because they experienced greatest difficulty in coordinating members' activities. Furthermore, LMX differentiation strengthened the relationship between LMX quality and role engagement, and team coordination strengthened the relationship between role engagement and employee performance. Theoretical and practical implications of the findings are discussed. PsycINFO Database Record (c) 2014 APA, all rights reserved.

Investigation on musculoskeletal discomfort and ergonomics risk factors among production team members at an automotive component assembly plant

Science.gov (United States)

Aziz, Fazilah Abdul; Ghazalli, Zakri; Zuki Mohamed, Nik Mohd; Isfar, Amri

2017-10-01

Musculoskeletal discomfort (MSD) is very common condition in automotive industry. MSD is affecting the worker’s health, well-being and lower down the productivity. Therefore, the main objective of this study was to identify the prevalence of MSD and ergonomics risk factors among the production team members at a selected automotive component manufacturer in Malaysia. MSD data were collected by conducting structure interview with all participants by referring to the Cornell Musculoskeletal Disorder Questionnaire (CMDQ). Those production team members who achieved a total discomfort score for all body regions more than 100 was selected for job task assessment. The physical exposure risk factors of work related musculoskeletal disorders (WMSD) has evaluated by using Quick Exposure Check (QEC) techniques. The results of the study identified the severe MSD associated with production assembly team members. It is expected that the prevalence of MSD for those production assembly team members was lower back (75.4%), upper back (63.2%), right shoulder (61.4%), and right wrist (60%). The QEC analysis discovered that about 70% of job tasks had very high risks for neck posture and 60% had high risks for the back (in moving condition) and shoulder/arm postures. There were 80% of respondents have produced a high score for exposure risk to vibration. As a conclusion, the main implication of the current study is that special attention should be paid to the physical and psychosocial aspects in production team members with musculoskeletal discomfort to improve their safety, health, and well-being, maintain work ability and productivity.

The integration of chiropractors into healthcare teams: a case study from sport medicine.

Science.gov (United States)

Theberge, Nancy

2008-01-01

This article examines the integration of chiropractors into multi-disciplinary healthcare teams in the specialisation of sport medicine. Sport medicine is practised in a number of contexts in professional and amateur sport. The current analysis focuses on the highest levels of amateur sport, as exemplified by the Olympics. Data are taken from interviews with 35 health professionals, including physicians, physiotherapists, athletic therapists and chiropractors. A defining feature of sport medicine is an emphasis on performance, which is the basis for a client-centred model of practice. These two elements have provided the main grounds for the inclusion of chiropractic in sport medicine. While the common understanding that 'athletes wanted them' has helped to secure a position for chiropractic within the system of sport medicine professions, this position is marked by ongoing tensions with other professions over the scope and content of practice, and the nature of the patient-practitioner relationship. In the context of these tensions, chiropractors' success in achieving acceptance on sport medicine teams is contingent on two factors: (a) reduced scope of practice in which they work primarily as manual therapists; and (b) the exemplary performance of individual practitioners who 'fit' into multi-disciplinary sport medicine teams.

Strengthening community health supply chain performance through an integrated approach: Using mHealth technology and multilevel teams in Malawi.

Science.gov (United States)

Shieshia, Mildred; Noel, Megan; Andersson, Sarah; Felling, Barbara; Alva, Soumya; Agarwal, Smisha; Lefevre, Amnesty; Misomali, Amos; Chimphanga, Boniface; Nsona, Humphreys; Chandani, Yasmin

2014-12-01

In 2010, 7.6 million children under five died globally - largely due to preventable diseases. Majority of these deaths occurred in sub-Saharan Africa. As a strategy to reduce child mortality, the Government of Malawi, in 2008, initiated integrated community case management allowing health surveillance assistants (HSAs) to treat sick children in communities. Malawi however, faces health infrastructure challenges, including weak supply chain systems leading to low product availability. A baseline assessment conducted in 2010 identified data visibility, transport and motivation of HSAs as challenges to continuous product availability. The project designed a mHealth tool as part of two interventions to address these challenges. A mobile health (mHealth) technology - cStock, for reporting on community stock data - was designed and implemented as an integral component of Enhanced Management (EM) and Efficient Product Transport (EPT) interventions. We developed a feasibility and acceptability framework to evaluate the effectiveness and predict the likelihood of scalability and ownership of the interventions. Mixed methods were used to conduct baseline and follow up assessments in May 2010 and February 2013, respectively. Routine monitoring data on community stock level reports, from cStock, were used to analyze supply chain performance over 18-month period in the intervention groups. Mean stock reporting rate by HSAs was 94% in EM group (n = 393) and 79% in EPT group (n = 253); mean reporting completeness was 85% and 65%, respectively. Lead time for HSA drug resupply over the 18-month period was, on average, 12.8 days in EM and 26.4 days in EPT, and mean stock out rate for 6 tracer products was significantly lower in EM compared to EPT group. Results demonstrate that cStock was feasible and acceptable to test users in Malawi, and that based on comparison with the EPT group, the team component of the EM group was an essential pairing with cStock to achieve the best

Strengthening community health supply chain performance through an integrated approach: Using mHealth technology and multilevel teams in Malawi

Science.gov (United States)

Shieshia, Mildred; Noel, Megan; Andersson, Sarah; Felling, Barbara; Alva, Soumya; Agarwal, Smisha; Lefevre, Amnesty; Misomali, Amos; Chimphanga, Boniface; Nsona, Humphreys; Chandani, Yasmin

2014-01-01

Background In 2010, 7.6 million children under five died globally – largely due to preventable diseases. Majority of these deaths occurred in sub–Saharan Africa. As a strategy to reduce child mortality, the Government of Malawi, in 2008, initiated integrated community case management allowing health surveillance assistants (HSAs) to treat sick children in communities. Malawi however, faces health infrastructure challenges, including weak supply chain systems leading to low product availability. A baseline assessment conducted in 2010 identified data visibility, transport and motivation of HSAs as challenges to continuous product availability. The project designed a mHealth tool as part of two interventions to address these challenges. Methods A mobile health (mHealth) technology – cStock, for reporting on community stock data – was designed and implemented as an integral component of Enhanced Management (EM) and Efficient Product Transport (EPT) interventions. We developed a feasibility and acceptability framework to evaluate the effectiveness and predict the likelihood of scalability and ownership of the interventions. Mixed methods were used to conduct baseline and follow up assessments in May 2010 and February 2013, respectively. Routine monitoring data on community stock level reports, from cStock, were used to analyze supply chain performance over 18–month period in the intervention groups. Results Mean stock reporting rate by HSAs was 94% in EM group (n = 393) and 79% in EPT group (n = 253); mean reporting completeness was 85% and 65%, respectively. Lead time for HSA drug resupply over the 18–month period was, on average, 12.8 days in EM and 26.4 days in EPT, and mean stock out rate for 6 tracer products was significantly lower in EM compared to EPT group. Conclusions Results demonstrate that cStock was feasible and acceptable to test users in Malawi, and that based on comparison with the EPT group, the team component of the EM group was an

Ability Dispersion and Team Performance

DEFF Research Database (Denmark)

Hoogendoorn, Sander; Parker, Simon C.; Van Praag, Mirjam

What is the effect of dispersed levels of cognitive ability of members of a (business) team on their team's performance? This paper reports the results of a field experiment in which 573 students in 49 (student) teams start up and manage real companies under identical circumstances for one year. We...... ensured exogenous variation in otherwise random team composition by assigning students to teams based on their measured cognitive abilities. Each team performs a variety of tasks, often involving complex decision making. The key result of the experiment is that the performance of business teams first...... increases and then decreases with ability dispersion. We seek to understand this finding by developing a model in which team members of different ability levels form sub- teams with other team members with similar ability levels to specialize in different productive tasks. Diversity spreads production over...

The reablement team’s voice: a qualitative study of how an integrated multidisciplinary team experiences participation in reablement

Directory of Open Access Journals (Sweden)

Hjelle KM

2016-11-01

Full Text Available Kari Margrete Hjelle,1,2 Olbjørg Skutle,2,3 Oddvar Førland,2,4 Herdis Alvsvåg4 1Department of Occupational Therapy, Physiotherapy and Radiography, Faculty of Health and Social Sciences, Bergen University College, Bergen, Norway; 2Centre for Care Research Western Norway, Bergen University College, Bergen, Norway; 3Department of Health and Social Educators, Faculty of Health and Social Sciences, Bergen University College, Bergen, Norway; 4VID Specialized University, Bergen, Norway Background: Reablement is an early and time-limited home-based rehabilitation intervention that emphasizes intensive, goal-oriented, and multidisciplinary assistance for people experiencing functional decline. Few empirical studies to date have examined the experiences of the integrated multidisciplinary teams involved in reablement. Accordingly, the aim of this study was to explore and describe how an integrated multidisciplinary team in Norway experienced participation in reablement.Methods: An integrated multidisciplinary team consisting of health care professionals with a bachelor’s degree (including a physiotherapist, a social educator, occupational therapists, and nurses and home-based care personnel without a bachelor’s degree (auxiliary nurses and nursing assistants participated in focus group discussions. Qualitative content analysis was used to analyze the resulting data.Results: Three main themes emerged from the participants’ experiences with participating in reablement, including “the older adult’s goals are crucial”, “a different way of thinking and acting – a shift in work culture”, and “a better framework for cooperation and application of professional expertise and judgment”. The integrated multidisciplinary team and the older adults collaborated and worked in the same direction to achieve the person’s valued goals. The team supported the older adults in performing activities themselves rather than completing tasks for them. To

Leader-team complementarity: Exploring the interactive effects of leader personality traits and team power distance values on team processes and performance.

Science.gov (United States)

Hu, Jia; Judge, Timothy A

2017-06-01

Integrating the leader trait perspective with dominance complementarity theory, we propose team power distance as an important boundary condition for the indirect impact of leader extraversion, agreeableness, and conscientiousness on team performance through a team's potency beliefs and through relational identification with the leader. Using time-lagged, 3-source data from 71 teams, we found that leader extraversion had a positive indirect impact on team in-role and extrarole performance through relational identification, but only for high power distance teams; leader conscientiousness had a positive influence on team in-role performance through team potency, but only for high power distance teams; and leader agreeableness had a positive effect on team in-role and extrarole performance via relational identification and on team in-role performance via team potency, but only for low power distance teams. The findings address prior inconsistencies regarding the relationships between leader traits and team effectiveness, identify an important boundary condition and key team processes that bridge the links, and provide a deeper understanding of the role of leader traits in teams. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Products and environment. Report on integrated product policy

International Nuclear Information System (INIS)

2001-01-01

The National Commission for Sustainable Development established on 16 November 1999 a subgroup which had as one of its tasks to formulate a national strategy or a strategic view on how Finland should promote integrated product policy in accordance with the requirements of sustainable development. The aim of integrated product policy is to improve the environmental friendliness of products and product systems by taking into account the environmental effects during their entire lifecycles. Its leading principles are lifecycle thinking, market-basedness, integration of environmental aspects into economic activity, and that all actors within the product chain (consumers, trade, companies) decrease the environmental consequences of their activities according to the principle of shared responsibility and to their preconditions. Political decision-making and administration should provide firms and clients with the required preconditions and i.a. remove obstacles to knowledge and promote research. In product policy, emphasis is on especially those instruments that encourage actors to develop their activities. At national level, economic instruments should be directed to domestic demand and use of products. It is often most appropriate to develop economic instruments for production and legislation and other regulation within international co-operation. (orig.)

An Integrative Model for Understanding Team Organizational Citizenship Behavior: Its Antecedents and Consequences for Educational Teams

Science.gov (United States)

Somech, Anit; Khotaba, Soha

2017-01-01

Purpose: The purpose of this paper is to use a model to broaden the understanding of the organizational citizenship behavior (OCB) phenomenon in educational teams and examines team OCB's mediating role in the relation of the contextual variables of team justice climate (distributive justice, procedural justice, interpersonal justice) to team…

Integrating CHWs as Part of the Team Leading Diabetes Group Visits: A Randomized Controlled Feasibility Study.

Science.gov (United States)

Vaughan, Elizabeth M; Johnston, Craig A; Cardenas, Victor J; Moreno, Jennette P; Foreyt, John P

2017-12-01

Purpose The purpose of the study was to evaluate the feasibility of integrating Community Health Workers (CHWs) as part of the team leading diabetes group visits. Methods This was a randomized controlled study that integrated CHWs as part of the team leading diabetes group visits for low-income Hispanic adults (n = 50). Group visits met for 3 hours each month for a 6-month duration. Main measures included baseline and 6-month clinical outcomes (ie, A1C, lipids), concordance with 8 standard of care guidelines (ie, screens for cervical, breast, and colon cancer) from the US Preventive Task Force and American Diabetes Association, and participant acceptability. Results Compared to control participants, the intervention group resulted in significantly better clinical outcomes or guideline concordance for the following areas: target A1C levels, retinal eye exams, diabetes foot exams, mammograms, and urine microalbumin. Significantly more individuals in the control group gained weight, whereas a greater number of participants in the intervention group lost weight. Intervention participants found the group visits highly acceptable. Conclusions Integrating CHWs as part a comprehensive diabetes group visit program is a feasible and effective system-level intervention to improve glycemic control and achieve guideline concordance.

Health care multidisciplinary teams: The sociotechnical approach for an integrated system-wide perspective.

Science.gov (United States)

Marsilio, Marta; Torbica, Aleksandra; Villa, Stefano

The current literature on the enabling conditions of multidisciplinary teams focuses on the singular dimensions of the organizations (i.e., human resources, clinical pathways, objects) without shedding light on to the way in which these organizational factors interact and mutually influence one another. Drawing on a system perspective of organizations, the authors analyze the organizational patterns that promote and support multidisciplinary teams and how they interrelate and interact to enforce the organization work system. The authors develop a modified sociotechnical system (STS) model to understand how the two dimensions of technical (devices/tools, layout/organization of space, core process standardization) and social (organizational structure, management of human resources and operations) can facilitate the implementation of multidisciplinary teams in health care. The study conducts an empirical analysis based on a sample of hospital adopters of transcatheter aortic valve implantation using the revised STS model. The modified STS model applied to the case studies improves our understanding of the critical implementation factors of a multidisciplinary approach and the importance of coordinating radical changes in the technical and the social subsystems of health care organizations. The analysis informs that the multidisciplinary effort is not a sequential process and that the interplay between the two subsystems needs to be managed efficaciously as an integrated organizational whole to deliver the goals set. Hospital managers must place equal focus on the closely interrelated technical and social dimensions by investing in (a) shared layouts and spaces that cross the boundaries of the specialized health care units, (b) standardization of the core processes through the implementation of local clinical pathways, (c) structured knowledge management mechanisms, (d) the creation of clinical directorates, and (e) the design of a planning and budgeting system that

The innovative rehabilitation team: an experiment in team building.

Science.gov (United States)

Halstead, L S; Rintala, D H; Kanellos, M; Griffin, B; Higgins, L; Rheinecker, S; Whiteside, W; Healy, J E

1986-06-01

This article describes an effort by one rehabilitation team to create innovative approaches to team care in a medical rehabilitation hospital. The major arena for implementing change was the weekly patient rounds. We worked to increase patient involvement, developed a rounds coordinator role, used a structured format, and tried to integrate research findings into team decision making. Other innovations included use of a preadmission questionnaire, a discharge check list, and a rounds evaluation questionnaire. The impact of these changes was evaluated using the Group Environment Scale and by analyzing participation in rounds based on verbatim transcripts obtained prior to and 20 months after formation of the Innovative Rehabilitation Team (IRT). The results showed decreased participation by medical personnel during rounds, and increased participation by patients. The rounds coordinator role increased participation rates of staff from all disciplines and the group environment improved within the IRT. These data are compared with similar evaluations made of two other groups, which served as control teams. The problems inherent in making effective, lasting changes in interdisciplinary rehabilitation teams are reviewed, and a plea is made for other teams to explore additional ways to use the collective creativity and resources latent in the team membership.

Mental health treatment teams and leadership: a systems model.

Science.gov (United States)

Yank, G R; Barber, J W; Spradlin, W W

1994-10-01

Mental health treatment teams are living systems at the group level and comprise key productive subsystems of organizations providing mental health care. Effective treatment teams, like effective organizations, are anticipatory systems that contain subsystems that model and predict future system and environmental conditions and enable responses that increase system viability. A systems analysis of treatment teams highlights their potential instability due to their tendencies to regress toward dysfunctional partial systems and their active maintenance in nonequilibrium steady states with their organizational and external environments. Team subsystems are analyzed from the viewpoints of system processes and also with regard to individuals and their roles. Boundary processes are central to effective team functioning, assure constancy of team membership, and regulate the team's interfaces with its parent agency and with the external environment. Various causes and forms of disturbed information processing within hierarchical organizations are examined, and their effects at the treatment team level are discussed. The conclusion of the discussion focuses on team leadership and how leadership expands upon the concept of the decider subsystem to include role and personal factors to the team's leaders, and functions that are anticipatory and integrative in nature. Effective leaders must set appropriate thresholds for feedback regulation processes, and balance several pairs of seemingly opposing forces, including homeostasis and development, role differentiation and role overlap, and personal accountability and empowerment of others.

Planning and Implementing Shared Teaching: An MBA Team-Teaching Case Study

Science.gov (United States)

Helms, Marilyn M.; Alvis, John M.; Willis, Marilyn

2005-01-01

Team teaching is a popular trend in business education. In an attempt to integrate seemingly disparate functional disciplines, a number of business programs have combined courses. Regardless of the courses combined (marketing and finance, management and accounting, economics and strategy, or production and cost accounting), the teaching pedagogy…

Technical Integration of Nuclear Hydrogen Production Technology

International Nuclear Information System (INIS)

Lee, Ki Young; Park, J. K.; Chang, J. H.

2009-04-01

These works focus on the development of attainment indices for nuclear hydrogen key technologies, the analysis of the hydrogen production process and the performance estimation for hydrogen production systems, and the assessment of the nuclear hydrogen production cost. For assessing the degree of attainments in comparison with the final goals of VHTR technologies in progress of researches, subdivided are the prerequisite items confirmed to the NHDD concepts. We developed and applied R and D quality management methodology to meet 'Development of Key Technologies for Nuclear Hydrogen' project. And we also distributed R and D QAM and R and D QAP to each teams and are in operation. The preconceptual flow diagrams of SI, HTSE, and HyS processes are introduced and their material and energy balances have been proposed. The hydrogen production thermal efficiencies of not only the SI process as a reference process but also the HTSE and HyS processes were also estimated. Technical feasibility assessments of SI, HTSE, and HyS processes have been carried out by using the pair-wise comparison and analytic hierarchy process, and it is revealed that the experts are considering the SI process as the most feasible process. The secondary helium pathway across the SI process is introduced. Dynamic simulation codes for the H2S04vaporizer, sulfuric acid and sulfur trioxide decomposers, and HI decomposer on the secondary helium pathway and for the primary and secondary sulfuric acid distillation columns, HIx solution distillation column, and preheater for HI vapor have been developed and integrated

An academic-VA partnership: Student interprofessional teams integrated with VA PACT teams.

Science.gov (United States)

Swenty, Constance L; Schaar, Gina L; Butler, Ryan M

2016-12-01

Veterans are challenged with multiple unique healthcare issues related to their military service environment. Likewise, health care providers must understand the special concerns associated with military conflict and recognize how the veteran's care can be optimized by interprofessional care delivery. Little is taught didactically or clinically that supports nursing students in addressing the unique issues of the veteran or the student's need to work collaboratively with allied health team members to enhance the veteran's care. Because of limited exposure to the veteran's special conditions, nursing students who may seek a career with the veteran population often face challenges in rendering appropriate care. The VA offers an invaluable opportunity for health profession students to collaborate with VA interprofessional Patient Aligned Care Teams (PACT) ultimately optimizing veteran health outcomes. This academic partnership, that implements an interprofessional model, will prepare students to better embrace the veteran population. This article describes the immersion of health profession students in interprofessional collaborative practice (IPCP) using PACT team principles which ultimately promotes the students' ability to link theory content to patient care delivery. Copyright © 2016 Elsevier Ltd. All rights reserved.

What makes age diverse teams effective? Results from a six-year research program.

Science.gov (United States)

Wegge, J; Jungmann, F; Liebermann, S; Shemla, M; Ries, B C; Diestel, S; Schmidt, K-H

2012-01-01

Based on a new model of productivity in age diverse tams, findings from a six-year research program are reported in which data from more than 745 natural teams with 8,848 employees in three different fields (car production, administrative work, financial services) were collected. Moreover, central assumptions of this model were tested with a representative survey of the German workforce (N = 2,000). Results support both significant advantages and disadvantages for age-mixed teams. Based on the findings, the following preconditions for the effectiveness of age diverse teams are identified: high task complexity, low salience and high appreciation of age diversity, a positive team climate, low age-discrimination, ergonomic design of work places, and the use of age differentiated leadership. Based on these insights, we developed a new training for supervisors, which addresses the aforementioned aspects and seeks to improve team performance and health of team members. It was found that the training reduces age stereotypes, team conflicts and enhances innovation. Thus, we can conclude that effective interventions for a successful integration of elderly employees in work groups are available and that combinations of measures that address ergonomic design issues, team composition and leadership are to be strongly recommended for practice.

Dedication increases productivity: an analysis of the implementation of a dedicated medical team in the emergency department.

Science.gov (United States)

Ramos, Pedro; Paiva, José Artur

2017-12-01

In several European countries, emergency departments (EDs) now employ a dedicated team of full-time emergency medicine (EM) physicians, with a distinct leadership and bed-side emergency training, in all similar to other hospital departments. In Portugal, however, there are still two very different models for staffing EDs: a classic model, where EDs are mostly staffed with young inexperienced physicians from different medical departments who take turns in the ED in 12-h shifts and a dedicated model, recently implemented in some hospitals, where the ED is staffed by a team of doctors with specific medical competencies in emergency medicine that work full-time in the ED. Our study assesses the effect of an intervention in a large academic hospital ED in Portugal in 2002, and it is the first to test the hypothesis that implementing a dedicated team of doctors with EM expertise increases the productivity and reduces costs in the ED, maintaining the quality of care provided to patients. A pre-post design was used for comparing the change on the organisational model of delivering care in our medical ED. All emergency medical admissions were tracked in 2002 (classic model with 12-h shift in the ED) and 2005/2006 (dedicated team with full-time EM physicians), and productivity, costs with medical human resources and quality of care measures were compared. We found that medical productivity (number of patients treated per hour of medical work) increased dramatically after the creation of the dedicated team (X 2 KW = 31.135; N = 36; p work reduced both in regular hours and overtime. Moreover, hospitalisation rates decreased and the length of stay in the ED increased significantly after the creation of the dedicated team. Implementing a dedicated team of doctors increased the medical productivity and reduced costs in our ED. Our findings have straightforward implication for Portuguese policymakers aiming at reducing hospital costs while coping with increased ED demand.

Teaming up to crack innovation and enterprise integration.

Science.gov (United States)

Cash, James I; Earl, Michael J; Morison, Robert

2008-11-01

In the continuing quest for business growth, many CEOs are turning to their CIOs and IT organizations because technology is essential to two compelling sources of growth: innovation and integration. Innovation, of course, is doing new things that customers ultimately appreciate and value--not only developing new generations of products, services, channels, and customer experience but also conceiving new business processes and models. Integration is making the multiple units, functions, and sites of large organizations work together to increase capacity, improve performance, lower cost structure, and discover opportunities for improvement that don't appear until you look across functions.

Exploring the dynamics of formal and informal networks in complex multi-team development projects

DEFF Research Database (Denmark)

Kratzer, J.; Gemuenden, H. G.; Lettl, Christopher

2007-01-01

The increasing number of complex multi-team projects and the scarcity of knowledge about how to run them successfully, create a need for systematic empirical studies. We attempt to lessen this empirical gap by examining the overlap and structure of formally ascribed design interfaces and informal...... communication networks between participating teams in two complex multi-team projects in the space industry. We study the two projects longitudinally throughout the design and integration phases of product development. There are three major findings. First, formally ascribed design interfaces and informal...... communication networks overlap only marginally. Second, the structure of informal communication remains largely stable in the transition from the design to the integration phase. The third and most intriguing finding is that the weak overlap between formally ascribed design interfaces and the informal...

Facilitating Team Cognition : How designers mirror what NPD teams do

NARCIS (Netherlands)

Stompff, G.

2012-01-01

Products are developed by large multi-disciplinary teams. The teams deal with many topics requiring the expertise of several specialists simultaneously. They have to decide together if something is a problem; propose multi-disciplinary solutions; and align their activities into a seamless whole.

Use of integrated technology in team sports: a review of opportunities, challenges, and future directions for athletes.

Science.gov (United States)

Dellaserra, Carla L; Gao, Yong; Ransdell, Lynda

2014-02-01

Integrated technology (IT), which includes accelerometers, global positioning systems (GPSs), and heart rate monitors, has been used frequently in public health. More recently, IT data have been used in sports settings to assess training and performance demands. However, the impact of IT in sports settings is yet to be evaluated, particularly in field-based team sports. This narrative-qualitative review provides an overview of the emerging impact of IT in sports settings. Twenty electronic databases (e.g., Medline, SPORTdiscus, and ScienceDirect), print publications (e.g., Signal Processing Magazine and Catapult Innovations news releases), and internet resources were searched using different combinations of keywords as follows: accelerometers, heart rate monitors, GPS, sport training, and field-based sports for relevant articles published from 1990 to the present. A total of 114 publications were identified, and 39 that examined a field-based team sport using a form of IT were analyzed. The articles chosen for analysis examined a field-based team sport using a form of IT. The uses of IT can be divided into 4 categories: (a) quantifying movement patterns (n = 22), (b) assessing the differences between demands of training and competition (n = 12), (c) measuring physiological and metabolic responses (n = 16), and (d) determining a valid definition for velocity and a sprint effort (n = 8). Most studies used elite adult male athletes as participants and analyzed the sports of Australian Rules football, field hockey, cricket, and soccer, with sample sizes between 5 and 20 participants. The limitations of IT in a sports setting include scalability issues, cost, and the inability to receive signals within indoor environments. Integrated technology can contribute to significant improvements in the preparation, training, and recovery aspects of field-based team sports. Future research should focus on using IT with female athlete populations and developing resources to use IT

Bridges and Barriers to Developing and Conducting Interdisciplinary Graduate-Student Team Research

Directory of Open Access Journals (Sweden)

Wayde Cameron. Morse

2007-12-01

Full Text Available Understanding complex socio-environmental problems requires specialists from multiple disciplines to integrate research efforts. Programs such as the National Science Foundation's Integrative Graduate Education and Research Traineeship facilitate integrated research efforts and change the way academic institutions train future leaders and scientists. The University of Idaho and the Tropical Agricultural Research and Higher Education Center in Costa Rica collaborate on a joint research program focusing on biodiversity conservation and sustainable production in fragmented landscapes. We first present a spectrum of integration ranging from disciplinary to transdisciplinary across seven aspects of the research process. We then describe our experiences and lessons learned conducting interdisciplinary graduate student team research. Using our program as a case study, we examine the individual, disciplinary, and programmatic bridges and barriers to conducting interdisciplinary research that emerged during our student team research projects. We conclude with a set of recommendations for exploiting the bridges and overcoming the barriers to conducting interdisciplinary research, especially as part of graduate education programs.

The Team Climate Inventory: application in hospital teams and methodological considerations.

Science.gov (United States)

Ouwens, M; Hulscher, M; Akkermans, R; Hermens, R; Grol, R; Wollersheim, H

2008-08-01

To test the validity, reliability and discriminating capacity of an instrument to assess team climate, the Team Climate Inventory (TCI), in a sample of Dutch hospital teams. The TCI is based on a four-factor theory of team climate for innovation. Validation study. Hospital teams in The Netherlands. 424 healthcare professionals; 355 nurses working in 22 nursing teams and 69 nurses and doctors working in 14 quality-improvement teams. Exploratory and confirmatory factor analyses, Pearson's product moment correlations, internal homogeneity of the TCI scales based on Cronbach alpha, and the TCI capability to discriminate between two types of healthcare teams, namely nursing teams and quality-improvement teams. The validity test revealed the TCI's five-factor structure and moderate data fit. The Cronbach alphas of the five scales showed acceptable reliabilities. The TCI discriminated between nursing teams and quality-improvement teams. The mean scores of quality-improvement teams were all significantly higher than those of the nursing teams. Patient care teams are essential for high-quality patient care, and team climate is an important characteristic of successful teams. This study shows that the TCI is a valid, reliable and discriminating self-report measure of team climate in hospital teams. The TCI can be used as a quality-improvement tool or in quality-of-care research.

Antecedents of team potency and team effectiveness: an examination of goal and process clarity and servant leadership.

Science.gov (United States)

Hu, Jia; Liden, Robert C

2011-07-01

Integrating theories of self-regulation with team and leadership literatures, this study investigated goal and process clarity and servant leadership as 3 antecedents of team potency and subsequent team effectiveness, operationalized as team performance and organizational citizenship behavior. Our sample of 304 employees represented 71 teams in 5 banks. Results showed that team-level goal and process clarity as well as team servant leadership served as 3 antecedents of team potency and subsequent team performance and team organizational citizenship behavior. Furthermore, we found that servant leadership moderated the relationships between both goal and process clarity and team potency, such that the positive relationships between both goal and process clarity and team potency were stronger in the presence of servant leadership.

Concurrency in product realization

Science.gov (United States)

Kelly, Michael J.

1994-03-01

Technology per se does not provide a competitive advantage. Timely exploitation of technology is what gives the competitive edge, and this demands a major shift in the product development process and management of the industrial enterprise. `Teaming to win' is more than a management theme; it is the disciplined engineering practice that is essential to success in today's global marketplace. Teaming supports the concurrent engineering practices required to integrate the activities of people responsible for product realization through achievement of shorter development cycles, lower costs, and defect-free products.

Integrating product design into the supply chain

DEFF Research Database (Denmark)

Khan, Omera; Stolte, Terje; Creazza, Alessandro

2016-01-01

into the supply chain. Originality/Value: This paper provides novel insights to both practitioners and researchers. For practitioners detailed recommendations are given on how they can maximise benefits through integrating product design into the supply chain. The RBV has been harnessed to highlight how......Purpose: The aim of the research is to illustrate how companies can create competitive capabilities through integration of product design into the supply chain. In doing so the paper reveals the challenges and the opportunities that companies face when integrating product design and supply chain...... of opportunities and challenges when integrating product design and the supply chain and subsequently a step-by-step guide is developed to address these. Practical Implications: The research provides key recommendations to companies on how to create competitive capabilities by integrating product design...

Integrating product design into the supply chain

DEFF Research Database (Denmark)

Khan, Omera; Stolte, Terje; Creazza, Alessandro

2016-01-01

Purpose: The aim of the research is to illustrate how companies can create competitive capabilities through integration of product design into the supply chain. In doing so the paper reveals the challenges and the opportunities that companies face when integrating product design and supply chain...... of opportunities and challenges when integrating product design and the supply chain and subsequently a step-by-step guide is developed to address these. Practical Implications: The research provides key recommendations to companies on how to create competitive capabilities by integrating product design...... into the supply chain. Originality/Value: This paper provides novel insights to both practitioners and researchers. For practitioners detailed recommendations are given on how they can maximise benefits through integrating product design into the supply chain. The RBV has been harnessed to highlight how...

Integrating Product and Technology Development

DEFF Research Database (Denmark)

Meijer, Ellen Brilhuis; Pigosso, Daniela Cristina Antelmi; McAloone, Tim C.

2016-01-01

.g. managing dependencies) and opportunities (e.g. streamlining development). This paper presents five existing reference models for technology development (TD), which were identified via a systematic literature review, where their possible integration with product development (PD) reference models......Although dual innovation projects, defined in this article as the concurrent development of products and technologies, often occur in industry, these are only scarcely supported methodologically. Limited research has been done about dual innovation projects and their inherent challenges (e...... was investigated. Based on the specific characteristics desired for dual innovation projects, such as integrated product development and coverage of multiple development stages, a set of selection criteria was employed to select suitable PD and TD reference models. The integration and adaptation of the selected...

Team structure and regulatory focus: the impact of regulatory fit on team dynamic.

Science.gov (United States)

Dimotakis, Nikolaos; Davison, Robert B; Hollenbeck, John R

2012-03-01

We report a within-teams experiment testing the effects of fit between team structure and regulatory task demands on task performance and satisfaction through average team member positive affect and helping behaviors. We used a completely crossed repeated-observations design in which 21 teams enacted 2 tasks with different regulatory focus characteristics (prevention and promotion) in 2 organizational structures (functional and divisional), resulting in 84 observations. Results suggested that salient regulatory demands inherent in the task interacted with structure to determine objective and subjective team-level outcomes, such that functional structures were best suited to (i.e., had best fit with) tasks with a prevention regulatory focus and divisional structures were best suited to tasks with a promotion regulatory focus. This contingency finding integrates regulatory focus and structural contingency theories, and extends them to the team level with implications for models of performance, satisfaction, and team dynamics.

EXPERIENCES INITIATING SOFTWARE PRODUCT LINE ENGINEERING IN SMALL TEAMS WITH PULSE

DEFF Research Database (Denmark)

Mærsk-Møller, Hans Martin; Jørgensen, Bo Nørregaard

2010-01-01

Small teams of software engineers are represented both in small companies and semi-independent fractions in medium and large companies. Even though some results and experience papers have been published in the context of Small- and Medium-Sized Enterprises (SMEs), there is a lack of experience pa...... an existing methodology, PuLSETM, drew advantages of NetBeans Rich Client Platform, and based the product line on the existing application....

Issues and Strategies for Establishing Work-Integrated Learning for Multidisciplinary Teams: A Focus on Degrees in Sustainability

Science.gov (United States)

Wilson, Robyn Fay

2015-01-01

This study was conducted to identify challenges and potential strategies to streamline work-integrated learning placements for multidisciplinary teams of students undertaking degrees in sustainability. Face-to-face interviews using a semi-structured questionnaire were conducted with 15 academics and senior university staff, from four universities…

Design for human factors (DfHF): a grounded theory for integrating human factors into production design processes.

Science.gov (United States)

Village, Judy; Searcy, Cory; Salustri, Filipo; Patrick Neumann, W

2015-01-01

The 'design for human factors' grounded theory explains 'how' human factors (HF) went from a reactive, after-injury programme in safety, to being proactively integrated into each step of the production design process. In this longitudinal case study collaboration with engineers and HF Specialists in a large electronics manufacturer, qualitative data (e.g. meetings, interviews, observations and reflections) were analysed using a grounded theory methodology. The central tenet in the theory is that when HF Specialists acclimated to the engineering process, language and tools, and strategically aligned HF to the design and business goals of the organisation, HF became a means to improve business performance. This led to engineers 'pulling' HF Specialists onto their team. HF targets were adopted into engineering tools to communicate HF concerns quantitatively, drive continuous improvement, visibly demonstrate change and lead to benchmarking. Senior management held engineers accountable for HF as a key performance indicator, thus integrating HF into the production design process. Practitioner Summary: Research and practice lack explanations about how HF can be integrated early in design of production systems. This three-year case study and the theory derived demonstrate how ergonomists changed their focus to align with design and business goals to integrate HF into the design process.

Professionals’ views on interprofessional stroke team functioning

Directory of Open Access Journals (Sweden)

Jane Murray Cramm

2011-07-01

Full Text Available Introduction: The quality of integrated stroke care depends on smooth team functioning but professionals may not always work well together. Professionals' perspectives on the factors that influence stroke team functioning remain largely unexamined. Understanding their experiences is critical to indentifying measures to improve team functioning. The aim of this study was to identify the factors that contributed to the success of interprofessional stroke teams as perceived by team members. Methods: We distributed questionnaires to professionals within 34 integrated stroke care teams at various health care facilities in 9 Dutch regions. 558 respondents (response rate: 39% completed the questionnaire. To account for the hierarchical structure of the study design we fitted a hierarchical random-effects model. The hierarchical structure comprised 558 stroke team members (level 1 nested in 34 teams (level 2. Results: Analyses showed that personal development, social well-being, interprofessional education, communication, and role understanding significantly contributed to stroke team functioning. Team-level constructs affecting interprofessional stroke team functioning were communication and role understanding. No significant relationships were found with individual-level personal autonomy and team-level cohesion. Discussion and conclusion: Our findings suggest that interventions to improve team members' social well-being, communication, and role understanding will improve teams' performance. To further advance interprofessional team functioning, healthcare organizations should pay attention to developing professionals' interpersonal skills and interprofessional education.       

Professionals’ views on interprofessional stroke team functioning

Directory of Open Access Journals (Sweden)

Jane Murray Cramm

2011-07-01

Full Text Available Introduction: The quality of integrated stroke care depends on smooth team functioning but professionals may not always work well together. Professionals' perspectives on the factors that influence stroke team functioning remain largely unexamined. Understanding their experiences is critical to indentifying measures to improve team functioning. The aim of this study was to identify the factors that contributed to the success of interprofessional stroke teams as perceived by team members.  Methods: We distributed questionnaires to professionals within 34 integrated stroke care teams at various health care facilities in 9 Dutch regions. 558 respondents (response rate: 39% completed the questionnaire. To account for the hierarchical structure of the study design we fitted a hierarchical random-effects model. The hierarchical structure comprised 558 stroke team members (level 1 nested in 34 teams (level 2.  Results: Analyses showed that personal development, social well-being, interprofessional education, communication, and role understanding significantly contributed to stroke team functioning. Team-level constructs affecting interprofessional stroke team functioning were communication and role understanding. No significant relationships were found with individual-level personal autonomy and team-level cohesion.  Discussion and conclusion: Our findings suggest that interventions to improve team members' social well-being, communication, and role understanding will improve teams' performance. To further advance interprofessional team functioning, healthcare organizations should pay attention to developing professionals' interpersonal skills and interprofessional education.        

A Path to Successful Energy Retrofits: Early Collaboration through Integrated Project Delivery Teams

Energy Technology Data Exchange (ETDEWEB)

Parrish, Kristen [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

2012-10-01

This document guides you through a process for the early design phases of retrofit projects to help you mitigate frustrations commonly experienced by building owners and designers. It outlines the value of forming an integrated project delivery team and developing a communication and information-sharing infrastructure that fosters collaboration. This guide does not present a complete process for designing an energy retrofit for a building. Instead, it focuses on the early design phase tasks related to developing and selecting energy efficiency measures (EEMs) that benefit from collaboration, and highlights the resulting advantages.

Building multidisciplinary business teams

International Nuclear Information System (INIS)

Dyson, C.J.; Winte, N.C.

1991-01-01

This paper is a description of an approach to managing Exploration and Production assets through the operation of multidisciplinary business teams. The business team approach can assist in improved asset performance in terms of efficiency, motivation and business results, compared with more traditional matrix style hierarchies. Within this paper certain critical success factors for the long term success of multidiscipline teams are outlined, together with some of the risk of business team operation

Do Different Training Conditions Facilitate Team Implementation?

DEFF Research Database (Denmark)

Nielsen, Karina; Randall, Raymond; Christensen, Karl B.

2017-01-01

A mixed methods approach was applied to examine the effects of a naturally occurring teamwork intervention supported with training. The first objective was to integrate qualitative process evaluation and quantitative effect evaluation to examine how and why the training influence intervention...... outcomes. The intervention (N = 328) was supplemented with four training conditions (no training, team member training, team leader training, and a combination of training types). The second objective was to examine whether different training conditions support team member training in isolation......, but not in combination, led to positive outcomes. The integrated analysis of qualitative and quantitative data indicated that a number of contextual factors interacted with training experiences and outcomes to influence the success of team intervention....

Consequences of team charter quality: Teamwork mental model similarity and team viability in engineering design student teams

Science.gov (United States)

Conway Hughston, Veronica

relationship. Foci for future research opportunities include using: a) online data collection methods to improve participant adherence to similarity rating instructions; b) story or narratives during pre- and posttest similarity rating data collection to create common levels of contextual perception; and c) support to ensure charters are integrated into the full project life cycle, not just a pre-project one time isolated activity. Twenty five sections, on average, of EDSGN 100 are taught each spring and fall semester. Consistent instructor expectations are set for the technical aspects of the course. However, ideas to foster team effectiveness are often left to the discretion of the individual instructor. Implementing empirically tested team effectiveness instructional activities would bring consistency to EDGSN 100 curriculum. Other instructional activities that would be of benefit to engineering educators include qualitative inquiry---asking intrateam process questions (at the mid-point of the project) and in-class reflection---dedicated time, post project, to discuss what went well/not well within the team.

Why and when hierarchy impacts team effectiveness: A meta-analytic integration.

Science.gov (United States)

Greer, Lindred L; de Jong, Bart A; Schouten, Maartje E; Dannals, Jennifer E

2018-06-01

Hierarchy has the potential to both benefit and harm team effectiveness. In this article, we meta-analytically investigate different explanations for why and when hierarchy helps or hurts team effectiveness, drawing on results from 54 prior studies (N = 13,914 teams). Our findings show that, on net, hierarchy negatively impacts team effectiveness (performance: ρ = -.08; viability: ρ = -.11), and that this effect is mediated by increased conflict-enabling states. Additionally, we show that the negative relationship between hierarchy and team performance is exacerbated by aspects of the team structure (i.e., membership instability, skill differentiation) and the hierarchy itself (i.e., mutability), which make hierarchical teams prone to conflict. The predictions regarding the positive effect of hierarchy on team performance as mediated by coordination-enabling processes, and the moderating roles of several aspects of team tasks (i.e., interdependence, complexity) and the hierarchy (i.e., form) were not supported, with the exception that task ambiguity enhanced the positive effects of hierarchy. Given that our findings largely support dysfunctional views on hierarchy, future research is needed to understand when and why hierarchy may be more likely to live up to its purported functional benefits. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Task versus relationship conflict, team performance, and team member satisfaction: a meta-analysis.

Science.gov (United States)

De Dreu, Carsten K W; Weingart, Laurie R

2003-08-01

This study provides a meta-analysis of research on the associations between relationship conflict, task conflict, team performance, and team member satisfaction. Consistent with past theorizing, results revealed strong and negative correlations between relationship conflict, team performance, and team member satisfaction. In contrast to what has been suggested in both academic research and introductory textbooks, however, results also revealed strong and negative (instead of the predicted positive) correlations between task conflict team performance, and team member satisfaction. As predicted, conflict had stronger negative relations with team performance in highly complex (decision making, project, mixed) than in less complex (production) tasks. Finally, task conflict was less negatively related to team performance when task conflict and relationship conflict were weakly, rather than strongly, correlated.

Factors Contributing to Research Team Effectiveness: Testing a Model of Team Effectiveness in an Academic Setting

Science.gov (United States)

Omar, Zoharah; Ahmad, Aminah

2014-01-01

Following the classic systems model of inputs, processes, and outputs, this study examined the influence of three input factors, team climate, work overload, and team leadership, on research project team effectiveness as measured by publication productivity, team member satisfaction, and job frustration. This study also examined the mediating…

Integrated Monitoring System of Production Processes

Directory of Open Access Journals (Sweden)

Oborski Przemysław

2016-12-01

Full Text Available Integrated monitoring system for discrete manufacturing processes is presented in the paper. The multilayer hardware and software reference model was developed. Original research are an answer for industry needs of the integration of information flow in production process. Reference model corresponds with proposed data model based on multilayer data tree allowing to describe orders, products, processes and save monitoring data. Elaborated models were implemented in the integrated monitoring system demonstrator developed in the project. It was built on the base of multiagent technology to assure high flexibility and openness on applying intelligent algorithms for data processing. Currently on the base of achieved experience an application integrated monitoring system for real production system is developed. In the article the main problems of monitoring integration are presented, including specificity of discrete production, data processing and future application of Cyber-Physical-Systems. Development of manufacturing systems is based more and more on taking an advantage of applying intelligent solutions into machine and production process control and monitoring. Connection of technical systems, machine tools and manufacturing processes monitoring with advanced information processing seems to be one of the most important areas of near future development. It will play important role in efficient operation and competitiveness of the whole production system. It is also important area of applying in the future Cyber-Physical-Systems that can radically improve functionally of monitoring systems and reduce the cost of its implementation.

Teacher Design in Teams as a Professional Development Arrangement for Developing Technology Integration Knowledge and Skills of Science Teachers in Tanzania

Science.gov (United States)

Kafyulilo, Ayoub; Fisser, Petra; Voogt, Joke

2016-01-01

This study investigated the impact of teacher design teams as a professional development arrangement for developing technology integration knowledge and skills among in-service science teachers. The study was conducted at a secondary school in Tanzania, where 12 in-service science teachers participated in a workshop about technology integration in…

Creating Shared Understanding in Product development Teams

DEFF Research Database (Denmark)

Nielsen, Louise Møller; Tollestrup, Christian

, they also have to figure out what their users and stakeholders find important. In other words, the team has to frame their project around real user needs, problems or opportunities – and figure out what people really want, and at the same time come to an agreement about this framing within the team......It is the first meeting in a new promising project. Everyone around the table is enthusiastic about the project and excited to get going. There is a good atmos¬phere and the discussion travels back and forth. Everyone tries to present their point of view, which results in a broad discussion on very...... if they have reached an agreement and everyone nods their approval. Everyone leaves the meeting, confident that they know what to do. A few weeks after, it is time for the second meeting. The team spirit is still high and there is a nice buzz in the meeting room, before the meeting starts. The introduction...

Multi-partner alliance teams for product innovation : The role of human resource management fit

NARCIS (Netherlands)

Estrada Vaquero, Isabel; Martin-Cruz, Natalia; Perez-Santana, Pilar

Teams working in multi-partner R&D alliances need a climate that fosters learning, creativity, and innovation to succeed in the joint development of new products. The strategic human resource management (HRM) literature recognizes that aligning human resources practices and those with the corporate

Supplier integration for new product developments: antecedents for supplier integration in modular product designs

NARCIS (Netherlands)

Eggers, Justus Erich

2016-01-01

Original equipment manufacturers (OEMs) increasingly integrate supplier resources in new product developments (NPD) to overcome bottlenecks of resource and to create competitive advantages. At the same time, OEMs react to the new market challenges by implementing modular product designs. Despite the

Quality charters or quality members? A control theory perspective on team charters and team performance.

Science.gov (United States)

Courtright, Stephen H; McCormick, Brian W; Mistry, Sal; Wang, Jiexin

2017-10-01

Though prevalent in practice, team charters have only recently received scholarly attention. However, most of this work has been relatively devoid of theory, and consequently, key questions about why and under what conditions team charter quality affects team performance remain unanswered. To address these gaps, we draw on macro organizational control theory to propose that team charter quality serves as a team-level "behavior" control mechanism that builds task cohesion through a structured exercise. We then juxtapose team charter quality with an "input" team control mechanism that influences the emergence of task cohesion more organically: team conscientiousness. Given their redundant effects on task cohesion, we propose that the effects of team charter quality and team conscientiousness on team performance (through task cohesion) are substitutive such that team charter quality primarily impacts team performance for teams that are low (vs. high) on conscientiousness. We test and find support for our hypotheses in a sample of 239 undergraduate self-managing project teams. Our study contributes to the groups and teams literature in the following ways: first, relative to previous studies, we take a more theory-driven approach toward understanding team charters, and in doing so, uncover when and why team charter quality impacts team performance; second, we integrate two normally disparate perspectives on team effectiveness (team development and team selection) to offer a broader perspective on how teams are "built"; and third, we introduce team charter quality as a performance-enhancing mechanism for teams lower on conscientiousness. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Achieving Customer Satisfaction through Integrated Products and Services

DEFF Research Database (Denmark)

Raja, Jawwad; Bourne, Dorota; Goffin, Keith

2013-01-01

Complex products such as manufacturing equipment have always needed maintenance and repair services. Increasingly, leading manufacturers are integrating products and services to generate increased revenues and achieve customer satisfaction. Designing integrated products and services requires...... a different approach to new product development and a clear understanding of how customers perceive the value they obtain from actual usage of products and services—so-called value-in-use. However, there is a lack of research on integrated products and services and how they impact customer satisfaction....... An exploratory study was undertaken to understand customers' views on integrated products and services and the value-in-use derived from such offerings. As value-in-use and its impacts are complicated concepts, a technique from psychology—Repertory Grid Technique—was used to gather data in 33 interviews...

The effects of team reflexivity on psychological well-being in manufacturing teams.

Science.gov (United States)

Chen, Jingqiu; Bamberger, Peter A; Song, Yifan; Vashdi, Dana R

2018-04-01

While the impact of team reflexivity (a.k.a. after-event-reviews, team debriefs) on team performance has been widely examined, we know little about its implications on other team outcomes such as member well-being. Drawing from prior team reflexivity research, we propose that reflexivity-related team processes reduce demands, and enhance control and support. Given the centrality of these factors to work-based strain, we posit that team reflexivity, by affecting these factors, may have beneficial implications on 3 core dimensions of employee burnout, namely exhaustion, cynicism, and inefficacy (reduced personal accomplishment). Using a sample of 469 unskilled manufacturing workers employed in 73 production teams in a Southern Chinese factory, we implemented a time lagged, quasi-field experiment, with half of the teams trained in and executing an end-of-shift team debriefing, and the other half assigned to a control condition and undergoing periodic postshift team-building exercises. Our findings largely supported our hypotheses, demonstrating that relative to team members assigned to the control condition, those assigned to the reflexivity condition experienced a significant improvement in all 3 burnout dimensions over time. These effects were mediated by control and support (but not demands) and amplified as a function of team longevity. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Enhancing Mathematical Communication for Virtual Math Teams

Directory of Open Access Journals (Sweden)

Gerry Stahl

2010-06-01

Full Text Available The Math Forum is an online resource center for pre-algebra, algebra, geometry and pre-calculus. Its Virtual Math Teams (VMT service provides an integrated web-based environment for small teams of people to discuss math and to work collaboratively on math problems or explore interesting mathematical micro-worlds together. The VMT Project studies the online math discourse that takes place during sessions of virtual math teams working on open-ended problem-solving tasks. In particular, it investigates methods of group cognition that are employed by teams in this setting. The VMT environment currently integrates social networking, synchronous text chat, a shared whiteboard for drawing, web browsers and an asynchronous wiki for exchanging findings within the larger community. A simple version of MathML is supported in the whiteboard, chat and wiki for displaying mathematical expressions. The VMT Project is currently integrating the dynamic mathematics application, GeoGebra, into its collaboration environment. This will create a multi-user version of GeoGebra, which can be used in concert with the chat, web browsers, curricular topics and wiki repository.

Development of an Integrated Team Training Design and Assessment Architecture to Support Adaptability in Healthcare Teams

Science.gov (United States)

2016-10-01

chosen for their expertise and to ensure geographical representation. COMPLETED Human Research Protection Office IRB 3 The HRPO has granted exempt... taxonomy (Figure 3) can help guide the selection of appropriate training targets and can help educators target correct task complexity, appropriate...team assessment. We extended this knowledge by investigating the team science, safety science, and human factors literature. Because our work

Alignment of Product Models and Product State Models - Integration of the Product Lifecycle Phases

DEFF Research Database (Denmark)

Larsen, Michael Holm; Kirkby, Lars Phillip; Vesterager, Johan

1999-01-01

The purpose of this paper is to discuss the integration of the Product Model (PM) and the Product State Model (PCM). Focus is on information exchange from the PSM to the PM within the manufacturing of a single ship. The paper distinguishes between information and knowledge integration. The paper ...... provides some overall strategies for integrating PM and PSM. The context of this discussion is a development project at Odense Steel Shipyard....

Professionals' views on interprofessional stroke team functioning

NARCIS (Netherlands)

J.M. Cramm (Jane); A.P. Nieboer (Anna)

2011-01-01

markdownabstractIntroduction: The quality of integrated stroke care depends on smooth team functioning but professionals may not always work well together. Professionals’ perspectives on the factors that influence stroke team functioning remain largely unexamined. Understanding their

One System Integrated Project Team: Retrieval And Delivery Of The Hanford Tank Wastes For Vitrification In The Waste Treatment Plant

Energy Technology Data Exchange (ETDEWEB)

Harp, Benton J. [Department of Energy, Office of River Protection, Richland, Washington (United States); Kacich, Richard M. [Bechtel National, Inc., Richland, WA (United States); Skwarek, Raymond J. [Washington River Protection Solutions LLC, Richland, WA (United States)

2012-12-20

wastes and for building and operating the WTP. The tank wastes are the result of Hanford's nearly fifty (50) years of plutonium production. In the intervening years, waste characteristics have been increasingly better understood. However, waste characteristics that are uncertain and will remain as such represent a significant technical challenge in terms of retrieval, transport, and treatment, as well as for design and construction ofWTP. What also is clear is that the longer the waste remains in the tanks, the greater the risk to the environment and the people of the Pacific Northwest. The goal of both projects - tank operations and waste treatment - is to diminish the risks posed by the waste in the tanks at the earliest possible date. About two hundred (200) WTP and TOC employees comprise the IPT. Individual work groups within One System include Technical, Project Integration & Controls, Front-End Design & Project Definition, Commissioning, Nuclear Safety & Engineering Systems Integration, and Environmental Safety and Health and Quality Assurance (ESH&QA). Additional functions and team members will be added as the WTP approaches the operational phase. The team has undertaken several initiatives since its formation to collaborate on issues: (1) alternate scenarios for delivery of wastes from the tank farms to WTP; (2) improvements in managing Interface Control Documents; (3) coordination on various technical issues, including the Defense Nuclear Facilities Nuclear Safety Board's Recommendation 2010-2; (4) deployment of the SmartPlant Foundation-configuration Management System; and (5) preparation of the joint contract deliverable of the Operational Readiness Support Plan.

One System Integrated Project Team: Retrieval And Delivery Of The Hanford Tank Wastes For Vitrification In The Waste Treatment Plant

International Nuclear Information System (INIS)

Harp, Benton J.; Kacich, Richard M.; Skwarek, Raymond J.

2012-01-01

wastes and for building and operating the WTP. The tank wastes are the result of Hanford's nearly fifty (50) years of plutonium production. In the intervening years, waste characteristics have been increasingly better understood. However, waste characteristics that are uncertain and will remain as such represent a significant technical challenge in terms of retrieval, transport, and treatment, as well as for design and construction ofWTP. What also is clear is that the longer the waste remains in the tanks, the greater the risk to the environment and the people of the Pacific Northwest. The goal of both projects - tank operations and waste treatment - is to diminish the risks posed by the waste in the tanks at the earliest possible date. About two hundred (200) WTP and TOC employees comprise the IPT. Individual work groups within One System include Technical, Project Integration snd Controls, Front-End Design and Project Definition, Commissioning, Nuclear Safety and Engineering Systems Integration, and Environmental Safety and Health and Quality Assurance (ESHandQA). Additional functions and team members will be added as the WTP approaches the operational phase. The team has undertaken several initiatives since its formation to collaborate on issues: (1) alternate scenarios for delivery of wastes from the tank farms to WTP; (2) improvements in managing Interface Control Documents; (3) coordination on various technical issues, including the Defense Nuclear Facilities Nuclear Safety Board's Recommendation 2010-2; (4) deployment of the SmartPlant Foundation-configuration Management System; and (5) preparation of the joint contract deliverable of the Operational Readiness Support Plan

One System Integrated Project Team: Retrieval and Delivery of Hanford Tank Wastes for Vitrification in the Waste Treatment Plant - 13234

International Nuclear Information System (INIS)

Harp, Benton J.; Kacich, Richard M.; Skwarek, Raymond J.

2013-01-01

wastes and for building and operating the WTP. The tank wastes are the result of Hanford's nearly fifty (50) years of plutonium production. In the intervening years, waste characteristics have been increasingly better understood. However, waste characteristics that are uncertain and will remain as such represent a significant technical challenge in terms of retrieval, transport, and treatment, as well as for design and construction of WTP. What also is clear is that the longer the waste remains in the tanks, the greater the risk to the environment and the people of the Pacific Northwest. The goal of both projects - tank operations and waste treatment - is to diminish the risks posed by the waste in the tanks at the earliest possible date. About two hundred (200) WTP and TOC employees comprise the IPT. Individual work groups within One System include Technical, Project Integration and Controls, Front-End Design and Project Definition, Commissioning, Nuclear Safety and Engineering Systems Integration, and Environmental Safety and Health and Quality Assurance (ESH and QA). Additional functions and team members will be added as the WTP approaches the operational phase. The team has undertaken several initiatives since its formation to collaborate on issues: (1) alternate scenarios for delivery of wastes from the tank farms to WTP; (2) improvements in managing Interface Control Documents; (3) coordination on various technical issues, including the Defense Nuclear Facilities Nuclear Safety Board's Recommendation 2010-2; (4) deployment of the SmartPlant R Foundation-Configuration Management System; and (5) preparation of the joint contract deliverable of the Operational Readiness Support Plan. (authors)

One System Integrated Project Team: Retrieval and Delivery of Hanford Tank Wastes for Vitrification in the Waste Treatment Plant - 13234

Energy Technology Data Exchange (ETDEWEB)

Harp, Benton J. [U.S. Department of Energy, Office of River Protection, Post Office Box 550, Richland, Washington 99352 (United States); Kacich, Richard M. [Bechtel National, Inc., 2435 Stevens Center Place, Richland, Washington 99354 (United States); Skwarek, Raymond J. [Washington River Protection Solutions LLC, Post Office Box 850, Richland, Washington 99352 (United States)

2013-07-01

for retrieving the tank wastes and for building and operating the WTP. The tank wastes are the result of Hanford's nearly fifty (50) years of plutonium production. In the intervening years, waste characteristics have been increasingly better understood. However, waste characteristics that are uncertain and will remain as such represent a significant technical challenge in terms of retrieval, transport, and treatment, as well as for design and construction of WTP. What also is clear is that the longer the waste remains in the tanks, the greater the risk to the environment and the people of the Pacific Northwest. The goal of both projects - tank operations and waste treatment - is to diminish the risks posed by the waste in the tanks at the earliest possible date. About two hundred (200) WTP and TOC employees comprise the IPT. Individual work groups within One System include Technical, Project Integration and Controls, Front-End Design and Project Definition, Commissioning, Nuclear Safety and Engineering Systems Integration, and Environmental Safety and Health and Quality Assurance (ESH and QA). Additional functions and team members will be added as the WTP approaches the operational phase. The team has undertaken several initiatives since its formation to collaborate on issues: (1) alternate scenarios for delivery of wastes from the tank farms to WTP; (2) improvements in managing Interface Control Documents; (3) coordination on various technical issues, including the Defense Nuclear Facilities Nuclear Safety Board's Recommendation 2010-2; (4) deployment of the SmartPlant{sup R} Foundation-Configuration Management System; and (5) preparation of the joint contract deliverable of the Operational Readiness Support Plan. (authors)

The relationship between servant leadership, affective team commitment and team effectiveness

Directory of Open Access Journals (Sweden)

Bright Mahembe

2013-04-01

Full Text Available Orientation: Value-based leadership practices play a critical role in teamwork in high-performance organisations.Research purpose: The aim of the study was to empirically validate a theoretical model explicating the structural relationships between servant leadership, affective team commitment and team effectiveness.Motivation for the study: The increased eliance on teams for production calls for an analysis of the role of follower-focused leadership practices in enhancing eam effectiveness.Research design, approach and method: A non-probabilityand multicultural sample consisting of 202 primary and secondary school teachers was drawn from 32 chools in the Western Cape Province of South Africa.Main findings: High levels of reliability were found and uni-dimensionality of the subscales was demonstrated through exploratory factor analyses. Good fit with the data was found for the measurement models through confirmatory factor analyses. Structural equation modelling showed a reasonable fit for the structural model. Positive relationships were found amongst servant leadership, team effectiveness and affective team commitment. Standard multiple regression analysis showed that affective team commitment moderated the relationship between servant leadership and team effectiveness.Practical/managerial implications: The findings emphasise the central role played by servant leadership and affective team commitment in team performance. Servant leadership fosters team effectiveness if employees feel committed to their work team.Contribution/value-add: The servant leadership style alone may not be a sufficient condition for team effectiveness; other variables, such as affective team commitment, also play a role. The study suggested specific variables that may also combine with leadership to positively influence team effectiveness.

Optimal production lot size and reorder point of a two-stage supply chain while random demand is sensitive with sales teams' initiatives

Science.gov (United States)

Sankar Sana, Shib

2016-01-01

The paper develops a production-inventory model of a two-stage supply chain consisting of one manufacturer and one retailer to study production lot size/order quantity, reorder point sales teams' initiatives where demand of the end customers is dependent on random variable and sales teams' initiatives simultaneously. The manufacturer produces the order quantity of the retailer at one lot in which the procurement cost per unit quantity follows a realistic convex function of production lot size. In the chain, the cost of sales team's initiatives/promotion efforts and wholesale price of the manufacturer are negotiated at the points such that their optimum profits reached nearer to their target profits. This study suggests to the management of firms to determine the optimal order quantity/production quantity, reorder point and sales teams' initiatives/promotional effort in order to achieve their maximum profits. An analytical method is applied to determine the optimal values of the decision variables. Finally, numerical examples with its graphical presentation and sensitivity analysis of the key parameters are presented to illustrate more insights of the model.

Professional Team Foundation Server 2010

CERN Document Server

Blankenship, Ed; Holliday, Grant; Keller, Brian

2011-01-01

Authoritative guide to TFS 2010 from a dream team of Microsoft insiders and MVPs!Microsoft Visual Studio Team Foundation Server (TFS) has evolved until it is now an essential tool for Microsoft?s Application Lifestyle Management suite of productivity tools, enabling collaboration within and among software development teams. By 2011, TFS will replace Microsoft?s leading source control system, VisualSourceSafe, resulting in an even greater demand for information about it. Professional Team Foundation Server 2010, written by an accomplished team of Microsoft insiders and Microsoft MVPs, provides

Leader humility and team creativity: The role of team information sharing, psychological safety, and power distance.

Science.gov (United States)

Hu, Jia; Erdogan, Berrin; Jiang, Kaifeng; Bauer, Talya N; Liu, Songbo

2018-03-01

In this study, we identify leader humility, characterized by being open to admitting one's limitations, shortcomings, and mistakes, and showing appreciation and giving credit to followers, as a critical leader characteristic relevant for team creativity. Integrating the literatures on creativity and leadership, we explore the relationship between leader humility and team creativity, treating team psychological safety and team information sharing as mediators. Further, we hypothesize and examine team power distance as a moderator of the relationship. We tested our hypotheses using data gathered from 72 work teams and 354 individual members from 11 information and technology firms in China using a multiple-source, time-lagged research design. We found that the positive relationship between leader humility and team information sharing was significant and positive only within teams with a low power distance value. In addition, leader humility was negatively related to team psychological safety in teams with a high power distance value, whereas the relationship was positive yet nonsignificant in teams with low power distance. Furthermore, team information sharing and psychological safety were both significantly related to team creativity. We discuss theoretical and practical implications for leadership and work teams. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Status of the Japanese ITER Home Team: January 1993

International Nuclear Information System (INIS)

Matsuda, Shinzaburo

1994-01-01

In June, 1992, Atomic Energy Commission of Japan determined the Third Phase Basic Program of Fusion Research and Development. It directs national policy for the experimental reactor phase of fusion research and development. As a government committee, the promotion and the planning of the entire fusion program will be continually carried out by the Fusion Council of Atomic Energy Commission. The Fusion Council has recently established an ITER Technical Committee which will give advice on technical matters of the ITER program to the Fusion Council. Thus, the government is ready to be fully supportive of ITER for the execution of this unprecedented international collaboration. There will be some other units to be organized in the fear future, in pace with the evolution of ITER activities. The involvement of other research institutes is open as a future possibility. The number of persons nominated as Home Team members is about 100 at present and will be increased depending upon the tasks assigned to the Japanese Home Team. The participation of industries in the EDA is of significant importance for the success of ITER. Firstly, innovative concepts or proposals owing to the technical expertise in other fields can be expected. Secondly, experience in production, fabrication or assembly is valuable in the integral review of the design. Thirdly, development and integration of production technologies are essential to realize future construction

Team Learning Ditinjau dari Team Diversity dan Team Efficacy

OpenAIRE

Pohan, Vivi Gusrini Rahmadani; Ancok, Djamaludin

2010-01-01

This research attempted to observe team learning from the level of team diversity and team efficacy of work teams. This research used an individual level of analysis rather than the group level. The team members measured the level of team diversity, team efficacy and team learning of the teams through three scales, namely team learning scale, team diversity scale, and team efficacy scale. Respondents in this research were the active team members in a company, PT. Alkindo Mitraraya. The total ...

Team Learning Ditinjau dari Team Diversity dan Team Efficacy

OpenAIRE

Vivi Gusrini Rahmadani Pohan; Djamaludin Ancok

2015-01-01

This research attempted to observe team learning from the level of team diversity and team efficacy of work teams. This research used an individual level of analysis rather than the group level. The team members measured the level of team diversity, team efficacy and team learning of the teams through three scales, namely team learning scale, team diversity scale, and team efficacy scale. Respondents in this research were the active team members in a company, PT. Alkindo Mitraraya. The total ...

The relationship between servant leadership, affective team commitment and team effectiveness

Directory of Open Access Journals (Sweden)

Bright Mahembe

2013-04-01

Full Text Available Orientation: Value-based leadership practices play a critical role in teamwork in high-performance organisations. Research purpose: The aim of the study was to empirically validate a theoretical model explicating the structural relationships between servant leadership, affective team commitment and team effectiveness. Motivation for the study: The increased eliance on teams for production calls for an analysis of the role of follower-focused leadership practices in enhancing eam effectiveness. Research design, approach and method: A non-probabilityand multicultural sample consisting of 202 primary and secondary school teachers was drawn from 32 chools in the Western Cape Province of South Africa. Main findings: High levels of reliability were found and uni-dimensionality of the subscales was demonstrated through exploratory factor analyses. Good fit with the data was found for the measurement models through confirmatory factor analyses. Structural equation modelling showed a reasonable fit for the structural model. Positive relationships were found amongst servant leadership, team effectiveness and affective team commitment. Standard multiple regression analysis showed that affective team commitment moderated the relationship between servant leadership and team effectiveness. Practical/managerial implications: The findings emphasise the central role played by servant leadership and affective team commitment in team performance. Servant leadership fosters team effectiveness if employees feel committed to their work team. Contribution/value-add: The servant leadership style alone may not be a sufficient condition for team effectiveness; other variables, such as affective team commitment, also play a role. The study suggested specific variables that may also combine with leadership to positively influence team effectiveness.

An integrative model of knowledge management and team work

OpenAIRE

Juan A. Marin-Garcia; Mª Elena Zarate-Martinez

2008-01-01

Human Resource Management relevance in Knowledge Management has been studied in academic literature mostly from the point of view of recruitment, selection, wages and salaries and career development processes. We have found few publications that are focused in the behaviour of the group of people who generate, share and transfer that knowledge while working in a team. The aim of this paper is to propose a framework that describes the relation between knowledge management and team work,, integ...

IT Workforce: Key Practices Help Ensure Strong Integrated Program Teams; Selected Departments Need to Assess Skill Gaps

Science.gov (United States)

2016-11-01

principles and steps associated with workforce planning that agencies can utilize in their efforts to assess and address IT skill gaps. See GAO-04-39...As another example, our prior review of the United States Department of Agriculture’s Farm Service Agency’s Modernize and Innovate the Delivery of...IT WORKFORCE Key Practices Help Ensure Strong Integrated Program Teams; Selected Departments Need to Assess Skill Gaps

Determinants of the sustainability of teacher design teams as a professional development arrangement for developing technology integration knowledge and skills

NARCIS (Netherlands)

Kafyulilo, A.; Fisser, P.; Voogt, J.; Searson, M.; Ochoa, M.

2014-01-01

Teacher design team was introduced to in-service science teachers in Tanzania between 2011 and 2012 as a professional development arrangement for developing technology integration knowledge and skills. This study was conducted to investigate the extent of the teachers’ continuous collaboration in

AmeriFlux Measurement Network: Science Team Research

Energy Technology Data Exchange (ETDEWEB)

Law, B E

2012-12-12

Research involves analysis and field direction of AmeriFlux operations, and the PI provides scientific leadership of the AmeriFlux network. Activities include the coordination and quality assurance of measurements across AmeriFlux network sites, synthesis of results across the network, organizing and supporting the annual Science Team Meeting, and communicating AmeriFlux results to the scientific community and other users. Objectives of measurement research include (i) coordination of flux and biometric measurement protocols (ii) timely data delivery to the Carbon Dioxide Information and Analysis Center (CDIAC); and (iii) assurance of data quality of flux and ecosystem measurements contributed by AmeriFlux sites. Objectives of integration and synthesis activities include (i) integration of site data into network-wide synthesis products; and (ii) participation in the analysis, modeling and interpretation of network data products. Communications objectives include (i) organizing an annual meeting of AmeriFlux investigators for reporting annual flux measurements and exchanging scientific information on ecosystem carbon budgets; (ii) developing focused topics for analysis and publication; and (iii) developing data reporting protocols in support of AmeriFlux network goals.

Complex Problem Solving in Teams: The Impact of Collective Orientation on Team Process Demands.

Science.gov (United States)

Hagemann, Vera; Kluge, Annette

2017-01-01

Complex problem solving is challenging and a high-level cognitive process for individuals. When analyzing complex problem solving in teams, an additional, new dimension has to be considered, as teamwork processes increase the requirements already put on individual team members. After introducing an idealized teamwork process model, that complex problem solving teams pass through, and integrating the relevant teamwork skills for interdependently working teams into the model and combining it with the four kinds of team processes (transition, action, interpersonal, and learning processes), the paper demonstrates the importance of fulfilling team process demands for successful complex problem solving within teams. Therefore, results from a controlled team study within complex situations are presented. The study focused on factors that influence action processes, like coordination, such as emergent states like collective orientation, cohesion, and trust and that dynamically enable effective teamwork in complex situations. Before conducting the experiments, participants were divided by median split into two-person teams with either high ( n = 58) or low ( n = 58) collective orientation values. The study was conducted with the microworld C3Fire, simulating dynamic decision making, and acting in complex situations within a teamwork context. The microworld includes interdependent tasks such as extinguishing forest fires or protecting houses. Two firefighting scenarios had been developed, which takes a maximum of 15 min each. All teams worked on these two scenarios. Coordination within the team and the resulting team performance were calculated based on a log-file analysis. The results show that no relationships between trust and action processes and team performance exist. Likewise, no relationships were found for cohesion. Only collective orientation of team members positively influences team performance in complex environments mediated by action processes such as

Leader emotional intelligence, transformational leadership, trust and team commitment: Testing a model within a team context

Directory of Open Access Journals (Sweden)

Anton F. Schlechter

2008-06-01

Full Text Available This exploratory study tested a model within a team context consisting of transformational-leadership behaviour, team-leader emotional intelligence, trust (both in the team leader and in the team members and team commitment. It was conducted within six manufacturing plants, with 25 teams participating. Of the 320 surveys distributed to these teams, 178 were received (which equals a 56% response rate. The surveys consisted of the multi-factor leadership questionnaire (MLQ, the Swinburne University emotional intelligence test (SUEIT, the organisational-commitment scale (OCS (adapted for team commitment and the workplace trust survey (WTS. The validity of these scales was established using exploratory factor analysis (EFA and confrmatory factor analysis (CFA. The Cronbach alpha was used to assess the reliability of the scales. The model was tested using structural equation modelling (SEM; an acceptable level of model ft was found. Signifcant positive relationships were further found among all the constructs. Such an integrated model has not been tested in a team context before and the positive fndings therefore add to existing teamwork literature. The fnding that transformational leadership and leader emotional intelligence are positively related to team commitment and trust further emphasises the importance of effective leadership behaviour in team dynamics and performance.

[The function of team-meetings for treatment teams on child and adolescent psychiatric wards].

Science.gov (United States)

Branik, Emil; Meng, Heiner

2006-01-01

In the daily work of multidisciplinary teams on child and adolescent psychiatric wards team-meetings play a central role to coordinate various treatment activities. In medical literature studies on the topic are lacking, and only few articles were found. The authors explore by a descriptive-hermeneutic analysis the numerous functions of meetings for the treatment team. To them belong catharsis, containment, reflection, regulation and integration. Psychodynamic, group dynamical and institutional factors will be described regarding their influence on the therapy management. Issues of power in institutions will be comprised in the discussion. The dialectical tension between professionalism and emotionality in the work with patients especially from the borderline-spectrum as well as between unity and diversity within the treatment team in regard to the different roles of each and everyone team member will be presented. Hints at how to manage these tensions will be given to preserve the therapeutical milieu on the ward.

Group facilitation: building that winning team.

Science.gov (United States)

Krumberger, J M

1992-12-01

Team building does not occur by chance; it involves using techniques to make it easier for members to contribute their expertise while working with others to achieve quality results. Evaluation of team effectiveness involves assessing both the processes (team interactions and work processes) and accomplishment of goals (out-comes; see box). Productivity and quality that could not be accomplished by individual efforts may be enhanced by effectively working teams.

Relations between mental health team characteristics and work role performance.

Science.gov (United States)

Fleury, Marie-Josée; Grenier, Guy; Bamvita, Jean-Marie; Farand, Lambert

2017-01-01

Effective mental health care requires a high performing, interprofessional team. Among 79 mental health teams in Quebec (Canada), this exploratory study aims to 1) determine the association between work role performance and a wide range of variables related to team effectiveness according to the literature, and to 2) using structural equation modelling, assess the covariance between each of these variables as well as the correlation with other exogenous variables. Work role performance was measured with an adapted version of a work role questionnaire. Various independent variables including team manager characteristics, user characteristics, team profiles, clinical activities, organizational culture, network integration strategies and frequency/satisfaction of interactions with other teams or services were analyzed under the structural equation model. The later provided a good fit with the data. Frequent use of standardized procedures and evaluation tools (e.g. screening and assessment tools for mental health disorders) and team manager seniority exerted the most direct effect on work role performance. While network integration strategies had little effect on work role performance, there was a high covariance between this variable and those directly affecting work role performance among mental health teams. The results suggest that the mental healthcare system should apply standardized procedures and evaluation tools and, to a lesser extent, clinical approaches to improve work role performance in mental health teams. Overall, a more systematic implementation of network integration strategies may contribute to improved work role performance in mental health care.

Three images of interdisciplinary team meetings.

Science.gov (United States)

Crepeau, E B

1994-08-01

Teams are an essential aspect of health care today, especially in rehabilitation or chronic illness where the course of care is frequently long, complex, and unpredictable. The coordinative function of teams and their interdisciplinary aspects are thought to improve patient care because team members bring their unique professional skills together to address patient problems. This coordination is enacted through the team meeting, which typically results in an integrated care plan. This professional image of team meetings is explicit and addresses the description and provision of care as objective and rational activities. In contrast, the constructed and ritualistic images of health care team meetings are implicit and concern the less objective and rational aspects of planning care. The constructed image pertains to the definitional activity of team members as they try to understand patient troubles and achieve consensus. This process involves the individual clinical reasoning of team members and the collective reasoning of the group. The ritualistic image is that aspect of team meetings in which the team affirms and reaffirms its collective identity. Drawing from field research of geropsychiatric team meetings, this article defines and explicates these images, focusing on the constructed and ritualistic aspects of team meetings and the influence of these images on group function.

User Involvement as a Configurable Integrated Product Delivery

DEFF Research Database (Denmark)

Vibæk, Kasper Sánchez

2009-01-01

as a configurable integrated product delivery then the architect can – using slightly provocatively a term from the production industry – be seen a configuration manager of processes shaping our physical surroundings. Products focusing on standardisation and mass customisation of the building process rather than......Integrated product deliveries as known from the product industry are beginning to emerge in construction. These are normally considered as physical systems that can be configured and customised for a specific delivery to form part of a unique construction project and help to reduce the complexity...... relevant field for development of customisable integrated product deliveries in construction. This development and its causes challenge the traditional role of the architect as the centre point in the creation of physical wholes or entireties. If user involvement, as argued, can be considered...

Managing multicultural teams.

Science.gov (United States)

Brett, Jeanne; Behfar, Kristin; Kern, Mary C

2006-11-01

Multicultural teams offer a number of advantages to international firms, including deep knowledge of different product markets, culturally sensitive customer service, and 24-hour work rotations. But those advantages may be outweighed by problems stemming from cultural differences, which can seriously impair the effectiveness of a team or even bring itto a stalemate. How can managers best cope with culture-based challenges? The authors conducted in-depth interviews with managers and members of multicultural teams from all over the world. Drawing on their extensive research on dispute resolution and teamwork and those interviews, they identify four problem categories that can create barriers to a team's success: direct versus indirect communication, trouble with accents and fluency, differing attitudes toward hierarchy and authority, and conflicting norms for decision making. If a manager--or a team member--can pinpoint the root cause of the problem, he or she is likelier to select an appropriate strategy for solving it. The most successful teams and managers, the authors found, dealt with multicultural challenges in one of four ways: adaptation (acknowledging cultural gaps openly and working around them), structural intervention (changing the shape or makeup of the team), managerial intervention (setting norms early or bringing in a higher-level manager), and exit (removing a team member when other options have failed). Which strategy is best depends on the particular circumstances--and each has potential complications. In general, though, managers who intervene early and set norms; teams and managers who try to engage everyone on the team; and teams that can see challenges as stemming from culture, not personality, succeed in solving culture-based problems with good humor and creativity. They are the likeliest to harvest the benefits inherent in multicultural teams.

WABASH RIVER INTEGRATED METHANOL AND POWER PRODUCTION FROM CLEAN COAL TECHNOLOGIES (IMPPCCT)

Energy Technology Data Exchange (ETDEWEB)

Doug Strickland; Albert Tsang

2002-10-14

The Wabash River Integrated Methanol and Power Production from Clean Coal Technologies (IMPPCCT) project is evaluating integrated electrical power generation and methanol production through clean coal technologies. The project is conducted by a multi-industry team lead by Gasification Engineering Corporation (GEC), and supported by Air Products and Chemicals, Inc., Dow Chemical Company, Dow Corning Corporation, Methanex Corporation, and Siemens Westinghouse Power Corporation. Three project phases are planned for execution over a three year period, including: (1) Feasibility study and conceptual design for an integrated demonstration facility, and for fence-line commercial plants operated at Dow Chemical or Dow Corning chemical plant locations; (2) Research, development, and testing to define any technology gaps or critical design and integration issues; and (3) Engineering design and financing plan to install an integrated commercial demonstration facility at the existing Wabash River Energy Limited (WREL) plant in West Terre Haute, Indiana. This report describes management planning, work breakdown structure development, and feasibility study activities by the IMPPCCT consortium in support of the first project phase. Project planning activities have been completed, and a project timeline and task list has been generated. Requirements for an economic model to evaluate the West Terre Haute implementation and for other commercial implementations are being defined. Specifications for methanol product and availability of local feedstocks for potential commercial embodiment plant sites have been defined. The WREL facility is a project selected and co-funded under the fifth phase solicitation of the U.S. Department of Energy's Clean Coal Technology Program. In this project, coal and/or other solid fuel feedstocks are gasified in an oxygen-blown, entrained-flow gasifier with continuous slag removal and a dry particulate removal system. The resulting product synthesis

Solar energy grid integration systems : final report of the Florida Solar Energy Center Team.

Energy Technology Data Exchange (ETDEWEB)

Ropp, Michael (Northern Plains Power Technologies, Brookings, SD); Gonzalez, Sigifredo; Schaffer, Alan (Lakeland Electric Utilities, Lakeland, FL); Katz, Stanley (Satcon Technology Corporation, Boston, MA); Perkinson, Jim (Satcon Technology Corporation, Boston, MA); Bower, Ward Isaac; Prestero, Mark (Satcon Technology Corporation, Boston, MA); Casey, Leo (Satcon Technology Corporation, Boston, MA); Moaveni, Houtan (Florida Solar Energy Center of the University of Central Florida, Cocoa, FL); Click, David (Florida Solar Energy Center of the University of Central Florida, Cocoa, FL); Davis, Kristopher (Florida Solar Energy Center of the University of Central Florida, Cocoa, FL); Reedy, Robert (Florida Solar Energy Center of the University of Central Florida, Cocoa, FL); Kuszmaul, Scott S.; Sena-Henderson, Lisa; David, Carolyn; Akhil, Abbas Ali

2012-03-01

Initiated in 2008, the Solar Energy Grid Integration Systems (SEGIS) program is a partnership involving the U.S. DOE, Sandia National Laboratories, private sector companies, electric utilities, and universities. Projects supported under the program have focused on the complete-system development of solar technologies, with the dual goal of expanding utility-scale penetration and addressing new challenges of connecting large-scale solar installations in higher penetrations to the electric grid. The Florida Solar Energy Center (FSEC), its partners, and Sandia National Laboratories have successfully collaborated to complete the work under the third and final stage of the SEGIS initiative. The SEGIS program was a three-year, three-stage project that include conceptual design and market analysis in Stage 1, prototype development and testing in Stage 2, and moving toward commercialization in Stage 3. Under this program, the FSEC SEGIS team developed a comprehensive vision that has guided technology development that sets one methodology for merging photovoltaic (PV) and smart-grid technologies. The FSEC team's objective in the SEGIS project is to remove barriers to large-scale general integration of PV and to enhance the value proposition of photovoltaic energy by enabling PV to act as much as possible as if it were at the very least equivalent to a conventional utility power plant. It was immediately apparent that the advanced power electronics of these advanced inverters will go far beyond conventional power plants, making high penetrations of PV not just acceptable, but desirable. This report summarizes a three-year effort to develop, validate and commercialize Grid-Smart Inverters for wider photovoltaic utilization, particularly in the utility sector.

Investigation of thermal integration between biogas production and upgrading

International Nuclear Information System (INIS)

Zhang, Xiaojing; Yan, Jinying; Li, Hailong; Chekani, Shabnam; Liu, Loncheng

2015-01-01

Highlights: • Identify thermal characteristics of amine-based biogas upgrading for waste heat recovery. • Identify thermal characteristics of AD biogas production as sink for heat recovery. • Evaluation of thermal integration between biogas production and upgrading to improve overall energy efficiency. • Cost analysis applied for the economic feasibility of the thermal integration. • Using the principles of target design and system integration for connected thermal processes. - Abstract: Thermal integration of anaerobic digestion (AD) biogas production with amine-based chemical absorption biogas upgrading has been studied to improve the overall efficiency of the intergraded system. The thermal characteristics have been investigated for industrial AD raw biogas production and amine-based chemical absorption biogas upgrading. The investigation provides a basic understanding for the possibilities of energy saving through thermal integration. The thermal integration is carried out through well-defined cases based on the thermal characteristics of the biogas production and the biogas upgrading. The following factors are taken into account in the case study: thermal conditions of sub-systems, material and energy balances, cost issues and main benefits. The potential of heat recovery has been evaluated to utilise the waste heat from amine-based upgrading process for the use in the AD biogas production. The results show that the thermal integration has positive effects on improving the overall energy efficiency of the integrated biogas plant. Cost analysis shows that the thermal integration is economically feasible

Nice Teams Finish Last The Secret to Unleashing Your Team's Maximum Potential

CERN Document Server

Miller, Brian Cole

2010-01-01

Don't rock the boat. Don't make waves. Don't offend anyone. There's a palpable feeling that clouds many team meetings and keeps them from being productive: over-politeness. And while the conflict that naturally exists in most organizations hasn't gone away, it manifests itself in passive-aggression, mediocrity, and a molasses-like inability to get anything done. Nice Teams Finish Last provides the antidote to this all-too-common tendency, giving managers, team leaders and members, and facilitators the practical support they need to battle "the nice trap" and start getting results! The book hel

Academic characteristics of orthopedic team physicians affiliated with high school, collegiate, and professional teams.

Science.gov (United States)

Makhni, Eric C; Buza, John A; Byram, Ian; Ahmad, Christopher S

2015-11-01

We conducted a study to determine the academic involvement and research productivity of orthopedic team physicians at high school, college, and professional levels of sport. Through Internet and telephone queries, we identified 1054 team physicians from 362 institutions, including 120 randomly selected high schools and colleges and 122 professional teams (baseball, basketball, football, hockey). For all physicians included in the study, we performed a comprehensive search of the Internet and of a citation database to determine academic affiliations, number of publications, and h-index values. Of the 1054 physicians, 678 (64%) were orthopedic surgeons. Percentage of orthopedic team physicians affiliated with an academic medical center was highest in professional sports (64%; 173/270) followed by collegiate sports (36%; 98/275) and high school sports (20%; 27/133). Median number of publications per orthopedic team physician was significantly higher in professional sports (30.6) than in collegiate sports (10.7) or high school sports (6). Median number of publications by orthopedic physicians also varied by sport, with the highest number in Major League Baseball (37.9; range, 0-225) followed by the National Basketball Association (32.0; range, 0-227) and the National Football League (30.4; range, 0-460), with the lowest number within the National Hockey League (20.7; range, 0-144). Academic affiliation and research productivity of orthopedic team physicians vary by competition level and professional sporting league.

Complex Problem Solving in Teams: The Impact of Collective Orientation on Team Process Demands

Science.gov (United States)

Hagemann, Vera; Kluge, Annette

2017-01-01

Complex problem solving is challenging and a high-level cognitive process for individuals. When analyzing complex problem solving in teams, an additional, new dimension has to be considered, as teamwork processes increase the requirements already put on individual team members. After introducing an idealized teamwork process model, that complex problem solving teams pass through, and integrating the relevant teamwork skills for interdependently working teams into the model and combining it with the four kinds of team processes (transition, action, interpersonal, and learning processes), the paper demonstrates the importance of fulfilling team process demands for successful complex problem solving within teams. Therefore, results from a controlled team study within complex situations are presented. The study focused on factors that influence action processes, like coordination, such as emergent states like collective orientation, cohesion, and trust and that dynamically enable effective teamwork in complex situations. Before conducting the experiments, participants were divided by median split into two-person teams with either high (n = 58) or low (n = 58) collective orientation values. The study was conducted with the microworld C3Fire, simulating dynamic decision making, and acting in complex situations within a teamwork context. The microworld includes interdependent tasks such as extinguishing forest fires or protecting houses. Two firefighting scenarios had been developed, which takes a maximum of 15 min each. All teams worked on these two scenarios. Coordination within the team and the resulting team performance were calculated based on a log-file analysis. The results show that no relationships between trust and action processes and team performance exist. Likewise, no relationships were found for cohesion. Only collective orientation of team members positively influences team performance in complex environments mediated by action processes such as

Complex Problem Solving in Teams: The Impact of Collective Orientation on Team Process Demands

Directory of Open Access Journals (Sweden)

Vera Hagemann

2017-09-01

Full Text Available Complex problem solving is challenging and a high-level cognitive process for individuals. When analyzing complex problem solving in teams, an additional, new dimension has to be considered, as teamwork processes increase the requirements already put on individual team members. After introducing an idealized teamwork process model, that complex problem solving teams pass through, and integrating the relevant teamwork skills for interdependently working teams into the model and combining it with the four kinds of team processes (transition, action, interpersonal, and learning processes, the paper demonstrates the importance of fulfilling team process demands for successful complex problem solving within teams. Therefore, results from a controlled team study within complex situations are presented. The study focused on factors that influence action processes, like coordination, such as emergent states like collective orientation, cohesion, and trust and that dynamically enable effective teamwork in complex situations. Before conducting the experiments, participants were divided by median split into two-person teams with either high (n = 58 or low (n = 58 collective orientation values. The study was conducted with the microworld C3Fire, simulating dynamic decision making, and acting in complex situations within a teamwork context. The microworld includes interdependent tasks such as extinguishing forest fires or protecting houses. Two firefighting scenarios had been developed, which takes a maximum of 15 min each. All teams worked on these two scenarios. Coordination within the team and the resulting team performance were calculated based on a log-file analysis. The results show that no relationships between trust and action processes and team performance exist. Likewise, no relationships were found for cohesion. Only collective orientation of team members positively influences team performance in complex environments mediated by action processes

What Happens to Integrated Product Development Models with Product/Service-System Approaches?

DEFF Research Database (Denmark)

Tan, Adrian; McAloone, Timothy Charles; Andreasen, Mogens Myrup

2006-01-01

Integrated Product Development (IPD) has traditionally focused on the development activities relating to physical technological artefacts. With the advent of business approaches for manufacturing firms based on providing customers the utility of integrated products and services – a term dubbed...... ‘product/service-systems (PSS)’ – companies need to extend their activities to include new dimensions of development. Within the paradigm of mass production and consumption, traditional product-oriented business strategies regarded physical technological artefacts (products) as the mediators of customer...... value. Value was based on the exchange of products between a providing company and a receiving customer. The more products the company could sell, the more revenue it generated. At the point of sale the ownership and responsibility of the product was transferred from company to customer. A customer...

Total design for textile products

Directory of Open Access Journals (Sweden)

Zafirova Koleta

2004-01-01

Full Text Available Product development is less than 20-30 years old and a relatively new area of research compared to the other classic academic disciplines. Integrated product development is a philosophy that systematically employs the teaming of functional disciplines to integrate and concurrently apple all the necessary processes to produce an effective and efficient product that satisfies customer needs. Product development might also be understood as a multidisciplinary field of research. The disciplines directly participating in product development include engineering design, innovation, manufacturing, marketing and management. A background contribution is also generated by disciplines such as psychology, social sciences and information technology. This article is an overview that introduces this philosophy to textile product development.

A Quantitative Team Situation Awareness Measurement Method Considering Technical and Nontechnical Skills of Teams

Directory of Open Access Journals (Sweden)

Ho Bin Yim

2016-02-01

Full Text Available Human capabilities, such as technical/nontechnical skills, have begun to be recognized as crucial factors for nuclear safety. One of the most common ways to improve human capabilities in general is training. The nuclear industry has constantly developed and used training as a tool to increase plant efficiency and safety. An integrated training framework was suggested for one of those efforts, especially during simulation training sessions of nuclear power plant operation teams. The developed training evaluation methods are based on measuring the levels of situation awareness of teams in terms of the level of shared confidence and consensus as well as the accuracy of team situation awareness. Verification of the developed methods was conducted by analyzing the training data of real nuclear power plant operation teams. The teams that achieved higher level of shared confidence showed better performance in solving problem situations when coupled with high consensus index values. The accuracy of nuclear power plant operation teams' situation awareness was approximately the same or showed a similar trend as that of senior reactor operators' situation awareness calculated by a situation awareness accuracy index (SAAI. Teams that had higher SAAI values performed better and faster than those that had lower SAAI values.

Patients as team members: opportunities, challenges and paradoxes of including patients in multi-professional healthcare teams.

Science.gov (United States)

Martin, Graham P; Finn, Rachael

2011-11-01

Current healthcare policy emphasises the need for more collaborative, team-based approaches to providing care, and for a greater voice for service users in the management and delivery of care. Increasingly, policy encourages 'partnerships' between users and professionals so that users, too, effectively become team members. In examining this phenomenon, this paper draws on insights from the organisational-sociological literature on team work, which highlights the challenges of bringing together diverse professional groups, but which has not, to date, been applied in contexts where users, too, are included in teams. Using data from a qualitative study of five pilot cancer-genetics projects, in which service users were included in teams responsible for managing and developing new services, it highlights the difficulties involved in making teams of such heterogeneous members-and the paradoxes that arise when this task is achieved. It reveals how the tension between integration and specialisation of team members, highlighted in the literature on teams in general, is especially acute for service users, the distinctiveness of whose contribution is more fragile, and open to blurring. © 2011 The Authors. Sociology of Health & Illness © 2011 Foundation for the Sociology of Health & Illness/Blackwell Publishing Ltd.

The Effectiveness of Different Mechanisms for Integrating Marketing and R&D

NARCIS (Netherlands)

M.A.A.M. Leenders (Mark); B. Wierenga (Berend)

2001-01-01

textabstractThe integration of marketing and R&D is a major concern for companies that want to improve their new product performance (NPP). In order to integrate, companies are using mechanisms such as physical proximity, cross-functional teams, and job rotation. This study examines the relative

Why turnover matters in self-managing work teams : Learning, social integration, and task flexibility

NARCIS (Netherlands)

van der Vegt, G.S.; Bunderson, S.; Kuipers, B.

This study considers how turnover in self-managing work teams influences the team interaction processes that promote effective task accomplishment. Drawing from research on self-managing work teams and group process, the authors propose that team turnover affects performance in self-managing teams

Assessing the facilitators and barriers of interdisciplinary team working in primary care using normalisation process theory: An integrative review.

Science.gov (United States)

O'Reilly, Pauline; Lee, Siew Hwa; O'Sullivan, Madeleine; Cullen, Walter; Kennedy, Catriona; MacFarlane, Anne

2017-01-01

Interdisciplinary team working is of paramount importance in the reform of primary care in order to provide cost-effective and comprehensive care. However, international research shows that it is not routine practice in many healthcare jurisdictions. It is imperative to understand levers and barriers to the implementation process. This review examines interdisciplinary team working in practice, in primary care, from the perspective of service providers and analyses 1 barriers and facilitators to implementation of interdisciplinary teams in primary care and 2 the main research gaps. An integrative review following the PRISMA guidelines was conducted. Following a search of 10 international databases, 8,827 titles were screened for relevance and 49 met the criteria. Quality of evidence was appraised using predetermined criteria. Data were analysed following the principles of framework analysis using Normalisation Process Theory (NPT), which has four constructs: sense making, enrolment, enactment, and appraisal. The literature is dominated by a focus on interdisciplinary working between physicians and nurses. There is a dearth of evidence about all NPT constructs apart from enactment. Physicians play a key role in encouraging the enrolment of others in primary care team working and in enabling effective divisions of labour in the team. The experience of interdisciplinary working emerged as a lever for its implementation, particularly where communication and respect were strong between professionals. A key lever for interdisciplinary team working in primary care is to get professionals working together and to learn from each other in practice. However, the evidence base is limited as it does not reflect the experiences of all primary care professionals and it is primarily about the enactment of team working. We need to know much more about the experiences of the full network of primary care professionals regarding all aspects of implementation work. International

Analysis Method for Integrating Components of Product

Energy Technology Data Exchange (ETDEWEB)

Choi, Jun Ho [Inzest Co. Ltd, Seoul (Korea, Republic of); Lee, Kun Sang [Kookmin Univ., Seoul (Korea, Republic of)

2017-04-15

This paper presents some of the methods used to incorporate the parts constituting a product. A new relation function concept and its structure are introduced to analyze the relationships of component parts. This relation function has three types of information, which can be used to establish a relation function structure. The relation function structure of the analysis criteria was established to analyze and present the data. The priority components determined by the analysis criteria can be integrated. The analysis criteria were divided based on their number and orientation, as well as their direct or indirect characteristic feature. This paper presents a design algorithm for component integration. This algorithm was applied to actual products, and the components inside the product were integrated. Therefore, the proposed algorithm was used to conduct research to improve the brake discs for bicycles. As a result, an improved product similar to the related function structure was actually created.

Analysis Method for Integrating Components of Product

International Nuclear Information System (INIS)

Choi, Jun Ho; Lee, Kun Sang

2017-01-01

This paper presents some of the methods used to incorporate the parts constituting a product. A new relation function concept and its structure are introduced to analyze the relationships of component parts. This relation function has three types of information, which can be used to establish a relation function structure. The relation function structure of the analysis criteria was established to analyze and present the data. The priority components determined by the analysis criteria can be integrated. The analysis criteria were divided based on their number and orientation, as well as their direct or indirect characteristic feature. This paper presents a design algorithm for component integration. This algorithm was applied to actual products, and the components inside the product were integrated. Therefore, the proposed algorithm was used to conduct research to improve the brake discs for bicycles. As a result, an improved product similar to the related function structure was actually created.

Enhancing Mathematical Communication for Virtual Math Teams

Science.gov (United States)

Stahl, Gerry; Çakir, Murat Perit; Weimar, Stephen; Weusijana, Baba Kofi; Ou, Jimmy Xiantong

2010-01-01

The Math Forum is an online resource center for pre-algebra, algebra, geometry and pre-calculus. Its Virtual Math Teams (VMT) service provides an integrated web-based environment for small teams of people to discuss math and to work collaboratively on math problems or explore interesting mathematical micro-worlds together. The VMT Project studies…

Techno-economic analysis of ammonia production via integrated biomass gasification

International Nuclear Information System (INIS)

Andersson, Jim; Lundgren, Joakim

2014-01-01

Highlights: • Techno-economic results regarding biomass-based ammonia production systems. • Integration of an ammonia production process in a pulp and paper mill. • Integrated ammonia production gains higher system efficiency than stand-alone production. • The economics of an integrated production system is improved compared to stand-alone production. - Abstract: Ammonia (NH 3 ) can be produced by synthesis of nitrogen and hydrogen in the Haber–Bosch process, where the economic challenge is the hydrogen production. Currently, substantial amounts of greenhouse gases are emitted from the ammonia industry since the hydrogen production is almost exclusively based on fossil feedstocks. Hydrogen produced via gasification of lignocellulosic biomass is a more environmentally friendly alternative, but the economic performance is critical. The main objective of this work was to perform a techno-economic evaluation of ammonia production via integrated biomass gasification in an existing pulp and paper mill. The results were compared with a stand-alone production case to find potential technical and economic benefits deriving from the integration. The biomass gasifier and the subsequent NH 3 production were modelled using the commercial software Aspen Plus. A process integration model based on Mixed Integer Linear Programming (MILP) was used to analyze the effects on the overall energy system of the pulp mill. Important modelling constraints were to maintain the pulp production and the steam balance of the mill. The results showed that the process economics and energy performance are favourable for the integrated case compared to stand-alone production. The main conclusion was however that a rather high NH 3 selling price is required to make both production cases economically feasible

Can staff attitudes to team working in stroke care be improved?

Science.gov (United States)

Gibbon, Bernard; Watkins, Caroline; Barer, David; Waters, Karen; Davies, Steve; Lightbody, Liz; Leathley, Michael

2002-10-01

Teamwork is regarded as the cornerstone of rehabilitation. It is recognized that the skills of a multiprofessional team are required to provide the care and interventions necessary to maximize the patient's potential to recover from his/her stroke. Critical evaluation of team working is lacking in the literature. Indeed, there is no consensus on a precise definition of teamwork or on the best way of implementing it, beyond a general exhortation to members to work to the same therapeutic plan in a cohesive manner. The literature has highlighted many problems in team working, including petty jealousies, ignorance and a perceived loss of autonomy and threat to professional status. To determine if the use of team co-ordinated approaches to stroke care and rehabilitation would improve staff attitudes to team working. A pre-post design was adopted using 'The Team Climate Inventory' to explore attitudes to team working before and after introducing the interventions. Local Research Ethics Committee approval was obtained. Improvements in attitudes towards team working suggest that the introduction of team co-ordinated approaches (integrated care pathways and team notes) did not result in greater team working. The introduction of an integrated care pathway and team notes is based on an assumption that they would enhance team working. The results suggest that the introduction of team co-ordinated approaches (team notes and care pathways) do not improve attitudes to team working, teams appear to take a long time to establish cohesion and develop shared values.

Study on team evaluation. Team process model for team evaluation

International Nuclear Information System (INIS)

Sasou Kunihide; Ebisu, Mitsuhiro; Hirose, Ayako

2004-01-01

Several studies have been done to evaluate or improve team performance in nuclear and aviation industries. Crew resource management is the typical example. In addition, team evaluation recently gathers interests in other teams of lawyers, medical staff, accountants, psychiatrics, executive, etc. However, the most evaluation methods focus on the results of team behavior that can be observed through training or actual business situations. What is expected team is not only resolving problems but also training younger members being destined to lead the next generation. Therefore, the authors set the final goal of this study establishing a series of methods to evaluate and improve teams inclusively such as decision making, motivation, staffing, etc. As the first step, this study develops team process model describing viewpoints for the evaluation. The team process is defined as some kinds of power that activate or inactivate competency of individuals that is the components of team's competency. To find the team process, the authors discussed the merits of team behavior with the experienced training instructors and shift supervisors of nuclear/thermal power plants. The discussion finds four team merits and many components to realize those team merits. Classifying those components into eight groups of team processes such as 'Orientation', 'Decision Making', 'Power and Responsibility', 'Workload Management', 'Professional Trust', 'Motivation', 'Training' and 'staffing', the authors propose Team Process Model with two to four sub processes in each team process. In the future, the authors will develop methods to evaluate some of the team processes for nuclear/thermal power plant operation teams. (author)

Integrated approach to economical, reliable, safe nuclear power production

International Nuclear Information System (INIS)

1982-06-01

An Integrated Approach to Economical, Reliable, Safe Nuclear Power Production is the latest evolution of a concept which originated with the Defense-in-Depth philosophy of the nuclear industry. As Defense-in-Depth provided a framework for viewing physical barriers and equipment redundancy, the Integrated Approach gives a framework for viewing nuclear power production in terms of functions and institutions. In the Integrated Approach, four plant Goals are defined (Normal Operation, Core and Plant Protection, Containment Integrity and Emergency Preparedness) with the attendant Functional and Institutional Classifications that support them. The Integrated Approach provides a systematic perspective that combines the economic objective of reliable power production with the safety objective of consistent, controlled plant operation

Are real teams healthy teams?

NARCIS (Netherlands)

Buljac, M.; van Woerkom, M.; van Wijngaarden, P.

2013-01-01

This study examines the impact of real-team--as opposed to a team in name only--characteristics (i.e., team boundaries, stability of membership, and task interdependence) on team processes (i.e., team learning and emotional support) and team effectiveness in the long-term care sector. We employed a

Integrals over products of distributions and coordinate independence of zero-temperature path integrals

International Nuclear Information System (INIS)

Kleinert, H.; Chervyakov, A.

2003-01-01

In perturbative calculations of quantum-statistical zero-temperature path integrals in curvilinear coordinates one encounters Feynman diagrams involving multiple temporal integrals over products of distributions, which are mathematically undefined. In addition, there are terms proportional to powers of Dirac δ-functions at the origin coming from the measure of path integration. We give simple rules for integrating products of distributions in such a way that the results ensure coordinate independence of the path integrals. The rules are derived by using equations of motion and partial integration, while keeping track of certain minimal features originating in the unique definition of all singular integrals in 1-ε dimensions. Our rules yield the same results as the much more cumbersome calculations in 1-ε dimensions where the limit ε→0 is taken at the end. They also agree with the rules found in an independent treatment on a finite time interval

Team Learning in Teacher Teams: Team Entitativity as a Bridge between Teams-in-Theory and Teams-in-Practice

Science.gov (United States)

Vangrieken, Katrien; Dochy, Filip; Raes, Elisabeth

2016-01-01

This study aimed to investigate team learning in the context of teacher teams in higher vocational education. As teacher teams often do not meet all criteria included in theoretical team definitions, the construct "team entitativity" was introduced. Defined as the degree to which a group of individuals possesses the quality of being a…

Analyzing the Interprofessional Working of a Home-Based Primary Care Team.

Science.gov (United States)

Smith-Carrier, Tracy; Neysmith, Sheila

2014-09-01

Increasingly, interprofessional teams are responsible for providing integrated health care services. Effective teams, however, are not the result of chance but require careful planning and ongoing attention to team processes. Based on a case study involving interviews, participant observation, and a survey, we identified key attributes for effective interprofessional working (IPW) within a home-based primary care (HBPC) setting. Recognizing the importance of a theoretical model that reflects the multidimensional nature of team effectiveness research, we employed the integrated team effectiveness model to analyze our findings. The results indicated that a shared vision, common goals, respect, and trust among team members – as well as processes for ongoing communication, effective leadership, and mechanisms for conflict resolution – are vital in the development of a high-functioning IPW team. The ambiguity and uncertainty surrounding the context of service provision (clients' homes), as well the negotiation of external relationships in the HBPC field, require further investigation.

The Effects of Integrating On-Going Training for Technical Documentation Teams

Science.gov (United States)

Catanio, Joseph T.; Catanio, Teri L.

2010-01-01

The tools and techniques utilized in the technical communications profession are constantly improving and changing. Information Technology (IT) organizations devote the necessary resources to equip and train engineering, marketing, and sales teams, but often fail to do so for technical documentation teams. Many IT organizations tend to view…

Clinical social work roles in an integrative, interdisciplinary team: enhancing parental compliance.

Science.gov (United States)

Terry, P O

1981-01-01

This paper is directed toward those attempting to develop effective social work functions within an interdisciplinary treatment team and utilizes a specialized group as a demonstration model. The Inborn Errors of Metabolism Team at the University of Tennessee Child Development Center deals with children whose genetic disorders require precise dietary management for the prevention of various handicapping conditions including mental retardation. Representatives of the six disciplines forming the core team recognize that professional interdependence must combine with parental cooperation if the program is to succeed. The clinical social worker is a permanent member of the team and focuses on the family during the years each child is followed. Social work roles are multiple and include those of crisis interventionist, family therapist, marriage counselor, patient advocate, and team interpreter. Such social work involvement is essential in the holistic approach to long-term patient care which recognizes that no disorder exists apart from the patient, nor the patient from his family.

Team Leader Structuring for Team Effectiveness and Team Learning in Command-and-Control Teams.

Science.gov (United States)

van der Haar, Selma; Koeslag-Kreunen, Mieke; Euwe, Eline; Segers, Mien

2017-04-01

Due to their crucial and highly consequential task, it is of utmost importance to understand the levers leading to effectiveness of multidisciplinary emergency management command-and-control (EMCC) teams. We argue that the formal EMCC team leader needs to initiate structure in the team meetings to support organizing the work as well as facilitate team learning, especially the team learning process of constructive conflict. In a sample of 17 EMCC teams performing a realistic EMCC exercise, including one or two team meetings (28 in sum), we coded the team leader's verbal structuring behaviors (1,704 events), rated constructive conflict by external experts, and rated team effectiveness by field experts. Results show that leaders of effective teams use structuring behaviors more often (except asking procedural questions) but decreasingly over time. They support constructive conflict by clarifying and by making summaries that conclude in a command or decision in a decreasing frequency over time.

Team Leader Structuring for Team Effectiveness and Team Learning in Command-and-Control Teams

Science.gov (United States)

van der Haar, Selma; Koeslag-Kreunen, Mieke; Euwe, Eline; Segers, Mien

2017-01-01

Due to their crucial and highly consequential task, it is of utmost importance to understand the levers leading to effectiveness of multidisciplinary emergency management command-and-control (EMCC) teams. We argue that the formal EMCC team leader needs to initiate structure in the team meetings to support organizing the work as well as facilitate team learning, especially the team learning process of constructive conflict. In a sample of 17 EMCC teams performing a realistic EMCC exercise, including one or two team meetings (28 in sum), we coded the team leader’s verbal structuring behaviors (1,704 events), rated constructive conflict by external experts, and rated team effectiveness by field experts. Results show that leaders of effective teams use structuring behaviors more often (except asking procedural questions) but decreasingly over time. They support constructive conflict by clarifying and by making summaries that conclude in a command or decision in a decreasing frequency over time. PMID:28490856

Team-Based Care: A Concept Analysis.

Science.gov (United States)

Baik, Dawon

2017-10-01

The purpose of this concept analysis is to clarify and analyze the concept of team-based care in clinical practice. Team-based care has garnered attention as a way to enhance healthcare delivery and patient care related to quality and safety. However, there is no consensus on the concept of team-based care; as a result, the lack of common definition impedes further studies on team-based care. This analysis was conducted using Walker and Avant's strategy. Literature searches were conducted using PubMed, Cumulative Index to Nursing and Allied Health Literature (CINAHL), and PsycINFO, with a timeline from January 1985 to December 2015. The analysis demonstrates that the concept of team-based care has three core attributes: (a) interprofessional collaboration, (b) patient-centered approach, and (c) integrated care process. This is accomplished through understanding other team members' roles and responsibilities, a climate of mutual respect, and organizational support. Consequences of team-based care are identified with three aspects: (a) patient, (b) healthcare professional, and (c) healthcare organization. This concept analysis helps better understand the characteristics of team-based care in the clinical practice as well as promote the development of a theoretical definition of team-based care. © 2016 Wiley Periodicals, Inc.

INTEGRATING ROUNDTABLE BRAINSTORMING INTO TEAM PAIR SOLO TECHNIQUE FOR IMPROVING STUDENTS’ PARTICIPATION IN WRITING OF DESCRIPTIVE TEXTS

Directory of Open Access Journals (Sweden)

author Sutarno

2015-01-01

Full Text Available The objectives of the study are to find out the application of integration of roundtable brainstorming into team pair solo technique in writing of descriptive texts and to investigate the improvement of students’ participation and achievement after taught by using the integration of the techniques. This study was an action research which was carried out through a preliminary study, first and second cycle activities. The subjects of this study were VII grade students of State Junior High School no.1 Semaka, Tanggamus, Lampung consisting of thirty two students. To collect the data, the researcher used instruments inform of interview, observation sheets, writing tests, and questionnaires. The findings of the research showed that students’ participation improved from the preliminary study, first and second cycle. In the preliminary study there were twenty six students classified as poor, six students classified as fair and no student classified as good in participation. While in the first cycle there were three students classified as fair and twenty nine students classified as good in participation and in the second cycle all students were classified as good in participation. The students’ writing also improved. The average score of students writing in the preliminary study was 53.31, first cycle was 64.41, and second cycle was 72.56.Key words: Roundtable Brainstorming, Team Pair Solo Technique, Students’ Participation, Writing Descriptive Texts

Metric integration architecture for product development

Science.gov (United States)

Sieger, David B.

1997-06-01

Present-day product development endeavors utilize the concurrent engineering philosophy as a logical means for incorporating a variety of viewpoints into the design of products. Since this approach provides no explicit procedural provisions, it is necessary to establish at least a mental coupling with a known design process model. The central feature of all such models is the management and transformation of information. While these models assist in structuring the design process, characterizing the basic flow of operations that are involved, they provide no guidance facilities. The significance of this feature, and the role it plays in the time required to develop products, is increasing in importance due to the inherent process dynamics, system/component complexities, and competitive forces. The methodology presented in this paper involves the use of a hierarchical system structure, discrete event system specification (DEVS), and multidimensional state variable based metrics. This approach is unique in its capability to quantify designer's actions throughout product development, provide recommendations about subsequent activity selection, and coordinate distributed activities of designers and/or design teams across all design stages. Conceptual design tool implementation results are used to demonstrate the utility of this technique in improving the incremental decision making process.

IEEE Computer Society/Software Engineering Institute Watts S. Humphrey Software Process Achievement Award 2016: Raytheon Integrated Defense Systems Design for Six Sigma Team

Science.gov (United States)

2017-04-01

worldwide • $23 billion in sales for 2015 Raytheon Integrated Defense Systems (IDS) is one of five businesses within Raytheon Company and is headquartered...Raytheon Integrated Defense Systems DFSS team has developed and implemented numerous leading-edge improvement and optimization methodologies resulting in...our software systems . In this section, we explain the first methodology, the application of statistical test optimization (STO) using Design of

Interprofessional Teamwork and Collaboration Between Community Health Workers and Healthcare Teams

Science.gov (United States)

Bernhardt, Jean M.; Lopez, Ruth Palan; Long-Middleton, Ellen R.; Davis, Sheila

2015-01-01

Objectives: Community Health Workers (CHWs) serve as a means of improving outcomes for underserved populations. However, their relationship within health care teams is not well studied. The purpose of this integrative review was to examine published research reports that demonstrated positive health outcomes as a result of CHW intervention to identify interprofessional teamwork and collaboration between CHWs and health care teams. Methods: A total of 47 studies spanning 33 years were reviewed using an integrative literature review methodology for evidence to support the following assumptions of effective interprofessional teamwork between CHWs and health care teams: (1) shared understanding of roles, norms, values, and goals of the team; (2) egalitarianism; (3) cooperation; (4) interdependence; and(5) synergy. Results: Of the 47 studies, 12 reported at least one assumption of effective interprofessional teamwork. Four studies demonstrated all 5 assumptions of interprofessional teamwork. Conclusions: Four studies identified in this integrative review serve as exemplars for effective interprofessional teamwork between CHWs and health care teams. Further study is needed to describe the nature of interprofessional teamwork and collaboration in relation to patient health outcomes. PMID:28462254

Integrated Design for Marketing and Manufacturing team: An examination of LA-ICP-AES in a mobile configuration. Final report

International Nuclear Information System (INIS)

1994-05-01

The Department of Energy (DOE) has identified the need for field-deployable elemental analysis devices that are safer, faster, and less expensive than the fixed laboratory procedures now used to screen hazardous waste sites. As a response to this need, the Technology Integration Program (TIP) created a mobile, field-deployable laser ablation-inductively coupled plasma-atomic emission spectrometry (LA-ICP-AES) sampling and analysis prototype. Although the elemental. screening prototype has been successfully field-tested, continued marketing and technical development efforts are required to transfer LA-ICP-AES technology to the commercial sector. TIP established and supported a student research and design group called the Integrated Design for Marketing and Manufacturing (IDMM) team to advance the technology transfer of mobile, field-deployable LA-ICP-AES. The IDMM team developed a conceptual design (which is detailed in this report) for a mobile, field-deployable LA-ICP-AES sampling and analysis system, and reports the following findings: Mobile, field-deployable LA-ICP-AES is commercially viable. Eventual regulatory acceptance of field-deployable LA-ICP-AES, while not a simple process, is likely. Further refinement of certain processes and components of LA-ICP-AES will enhance the device's sensitivity and accuracy

Assessing Performance and Learning in Interprofessional Health Care Teams.

Science.gov (United States)

Ekmekci, Ozgur; Sheingold, Brenda; Plack, Margaret; LeLacheur, Susan; Halvaksz, Jennifer; Lewis, Karen; Schlumpf, Karen; Greenberg, Larrie

2015-01-01

Teamwork has become an integral part of health care delivery. Such emphasis on teamwork has generated the need to systematically measure and improve the learning and performance of health care teams. The purpose of this study was to develop a comprehensive assessment instrument, the Interprofessional Education and Practice Inventory (IPEPI), to evaluate learning and performance in interprofessional health care teams. The 12-month study commenced in three 4-month phases: (1) a panel of 25 national and international experts participated in the Delphi process to identify factors influencing team learning and team performance; (2) the research team analyzed the findings from the two Delphi rounds to develop the IPEPI; and (3) a cohort of 27 students at the university engaged in clinical simulations to test and refine the IPEPI. Findings suggest key factors that significantly influence team learning and performance include whether the group is able to foster a climate of mutual respect, adopt effective communication strategies, develop a sense of trust, and invite contributions from others. Additionally, in assessing organizational factors, participants indicated those factors that significantly influence team learning and performance include whether the organization is patient-centered, creates a culture of safety (not blame), and supports individual and team learning. These findings highlight the critical role assessment plays in enhancing not just interprofessional education or interprofessional practice, but in essence advancing interprofessional education and practice--which requires an integrated examination of how health care professionals learn and perform in teams.

Improving Human/Autonomous System Teaming Through Linguistic Analysis

Science.gov (United States)

Meszaros, Erica L.

2016-01-01

An area of increasing interest for the next generation of aircraft is autonomy and the integration of increasingly autonomous systems into the national airspace. Such integration requires humans to work closely with autonomous systems, forming human and autonomous agent teams. The intention behind such teaming is that a team composed of both humans and autonomous agents will operate better than homogenous teams. Procedures exist for licensing pilots to operate in the national airspace system and current work is being done to define methods for validating the function of autonomous systems, however there is no method in place for assessing the interaction of these two disparate systems. Moreover, currently these systems are operated primarily by subject matter experts, limiting their use and the benefits of such teams. Providing additional information about the ongoing mission to the operator can lead to increased usability and allow for operation by non-experts. Linguistic analysis of the context of verbal communication provides insight into the intended meaning of commonly heard phrases such as "What's it doing now?" Analyzing the semantic sphere surrounding these common phrases enables the prediction of the operator's intent and allows the interface to supply the operator's desired information.

How do Analogizing and Mental Simulation Influence Team Dynamics in Innovative Product Design?

DEFF Research Database (Denmark)

Casakin, Hernan; Ball, Linden J.; Christensen, Bo T.

2015-01-01

association with team cohesion, whereas solution generation and function finding had a stronger association with team collaboration. We propose that analogizing and mental simulations are strategies that serve valuable functions in engendering enhanced cohesion and collaboration, which might be expected...... and team collaboration. Analogies were coded for “analogical distance” (i.e., within domain or between domain) and “analogical purpose” (i.e., problem identification, function finding, solution generation, and explanation). The results indicated that the presence of either analogizing or mental simulation...... was related to team cohesion and team collaboration, with mental simulation having an especially marked association with team collaboration. Within-domain analogizing was found to enhance team collaboration, but it did not influence team cohesion. Furthermore, all types of analogical purpose showed a similar...

Report on Integrating Activities and Models for Collaboration

DEFF Research Database (Denmark)

Buus, Lillian; Dirckinck-Holmfeld, Lone; Ryberg, Thomas

This report is the deliverable for work package (WP) 28.3 “Integrated network and activities for the exchange of and collaboration between Master students, PhD students and professors” of the European Research Team (ERT) on Conditions for Productive Networked Learning Environments. The objective...... of WP28.3 is to build up an integrated network and activities for the exchange and collaboration between Master students, professional masters, PhD students and professors and to establish a virtual community around the research area of conditions for productive learning in networked learning...

Integrated production planning and water management in the food industry: A cheese production case study

NARCIS (Netherlands)

Pulluru, Sai Jishna; Akkerman, Renzo; Hottenrott, Andreas

2017-01-01

Efficient water management is increasingly relevant in the food industry. Exploiting water reuse opportunities in planning production activities is a key part of this. We study integrated water management and production planning in cheese production. For this, we develop a water-integrated lot

Power versus participation in health service teams: a delicate balance.

Science.gov (United States)

Marriott, A; Harris, I

2000-05-01

The purpose of this paper is to critically review the effectiveness of a participative management approach within health service teams. It questions the reality of staff empowerment as an essential product of this approach, and examines the influence of power issues on the degree of empowerment that the organization may allow. The benefits and challenges of staff participation are highlighted, with reference to the manager's role in the participation process. The article concludes by advocating the positive use of power in order to maintain the integrity and effectiveness of a participative management approach.

The autonomous vision system on TeamSat

DEFF Research Database (Denmark)

Betto, Maurizio; Jørgensen, John Leif; Riis, Troels

1999-01-01

The second qualification flight of Ariane 5 blasted off-the European Space Port in French Guiana on October 30, 1997, carrying on board a small technology demonstration satellite called TeamSat. Several experiments were proposed by various universities and research institutions in Europe and five...... of them were finally selected and integrated into TeamSat, namely FIPEX, VTS, YES, ODD and the Autonomous Vision System, AVS, a fully autonomous star tracker and vision system. This paper gives short overview of the TeamSat satellite; design, implementation and mission objectives. AVS is described in more...

Asset management -- Integrated software optimizes production performance

International Nuclear Information System (INIS)

Polczer, S.

1998-01-01

Developments in data collection and retrieval systems to allow timely cost analysis, financial reporting and production management are discussed. One of the most important new OLAP (on-line analytical processing) products is Energy Warehouse which gathers field information from various sources, allows advanced searches, and generates reports previously unavailable in other conventional financial accounting systems. Another OLAP-based system, the Canadian Upstream Energy System (CUES), was developed by the Oracle Corporation and the Calgary-based Applied Terravision Systems (ATS) Inc. CUES combines Oracle's universal data server software development tools with ATS's upstream financial, land, geotechnical and production applications. ATS also developed a product called IDPMARS (Integrated Daily Production Management Accounting Reporting System). It interfaces with CUES to link working interests, government royalties, administration, facility charges, lifting costs, transportation tooling, and customers by integrating field data collection systems with financial accounting

Asset management -- Integrated software optimizes production performance

Energy Technology Data Exchange (ETDEWEB)

Polczer, S.

1998-10-01

Developments in data collection and retrieval systems to allow timely cost analysis, financial reporting and production management are discussed. One of the most important new OLAP (on-line analytical processing) products is Energy Warehouse which gathers field information from various sources, allows advanced searches, and generates reports previously unavailable in other conventional financial accounting systems. Another OLAP-based system, the Canadian Upstream Energy System (CUES), was developed by the Oracle Corporation and the Calgary-based Applied Terravision Systems (ATS) Inc. CUES combines Oracle`s universal data server software development tools with ATS`s upstream financial, land, geotechnical and production applications. ATS also developed a product called IDPMARS (Integrated Daily Production Management Accounting Reporting System). It interfaces with CUES to link working interests, government royalties, administration, facility charges, lifting costs, transportation tooling, and customers by integrating field data collection systems with financial accounting.

Human Systems Integration: Requirements and Functional Decomposition

Science.gov (United States)

Berson, Barry; Gershzohn, Gary; Boltz, Laura; Wolf, Russ; Schultz, Mike

2005-01-01

This deliverable was intended as an input to the Access 5 Policy and Simulation Integrated Product Teams. This document contains high-level pilot functionality for operations in the National Airspace System above FL430. Based on the derived pilot functions the associated pilot information and control requirements are given.

International Product Market Integration, Rents and Wage Formation

DEFF Research Database (Denmark)

Sørensen, Allan

including product market rents and the possibility that jobs may be relocated across national labour markets. Possibilities and threats, however, will not in general be uniformly distributed across firms and therefore groups in the labour market. These issues are explored in a Ricardian trade model......International product market integration enhances both export possibilities through easier access to foreign markets, but also the import threat arising from foreign firms penetrating into the domestic market. These mechanisms affect wage formation and employment creation through many channels...... with imperfect competition, heterogeneity in the labour market, and decentralized wage-bargaining. The Paper analyses how product market integration affects wage formation, and identifies characteristics of winners and losers in the integration process....

A maturidade e o desempenho das equipes no ambiente produtivo Maturity and performance of teams in the production environment

Directory of Open Access Journals (Sweden)

Robson Luiz Montanari

2011-01-01

Full Text Available O presente estudo teve como objetivo identificar a influência da maturidade das equipes no desempenho das suas atividades. Para tanto, sete equipes de uma prestadora de serviços foram analisadas. Os procedimentos metodológicos foram permeados por entrevistas, observações não participantes, aplicação de dois questionários e três instrumentos. Os resultados permitiram identificar influências da maturidade no desempenho das equipes em ambiente produtivo, bem como verificar que ela está intimamente relacionada ao comportamento revelado no desempenho dentro do grupo. Nas equipes com maior maturidade, comportamentos indesejáveis ao desempenho coletivo não apareceram na mesma proporção aos das equipes com menor grau de maturidade. Infere-se que, à medida que a maturidade dos grupos é aumentada, pela presença de integrantes mais comprometidos e com confiança mútua, os membros das equipes mudam o comportamento alterando a forma de funcionamento do grupo e transformando-se em uma equipe. Se as equipes em estudo, dentro de uma sequência evolutiva de funcionamento, aumentarem sua maturidade, tendem a influenciar positivamente o seu desempenho no ambiente produtivo em que estão inseridas.This study aimed to identify the influence of maturity of the teams in carrying out its activities. Seven teams of a service provider industry were analyzed. The data were collected through interviews, non-participant observations, application of two questionnaires and three instruments. The results showed the influence of maturity on the performance of teams in the production environment and that it is closely related to the individual behavior within the group. In the teams with more maturity, the presence of undesirable collective behaviors did not occur in the same proportion of that of teams with lesser degrees of maturity. It can be inferred that as the maturity of the groups is increased by the presence of more committed members with mutual

Conditions and strategies for integrating ergonomics into product development

DEFF Research Database (Denmark)

Broberg, Ole

1996-01-01

Ergonomics considerations at the stage of product development in industry is a major strategy for prevention of work-related injuries and illnesses among employees at the time of manufacture of new products. This study elucidates some important conditions and possibilities for integrating...... such considerations during the product development process. Special attention is paid to the role of design and production engineers. Based on different understandings of the product development process four approaches to integration of ergonomics are outlined....

Developing engineering processes through integrated modelling of product and process

DEFF Research Database (Denmark)

Nielsen, Jeppe Bjerrum; Hvam, Lars

2012-01-01

This article aims at developing an operational tool for integrated modelling of product assortments and engineering processes in companies making customer specific products. Integrating a product model in the design of engineering processes will provide a deeper understanding of the engineering...... activities as well as insight into how product features affect the engineering processes. The article suggests possible ways of integrating models of products with models of engineering processes. The models have been tested and further developed in an action research study carried out in collaboration...... with a major international engineering company....

The potential improvement of team-working skills in Biomedical and Natural Science students using a problem-based learning approach

Directory of Open Access Journals (Sweden)

Forough L. Nowrouzian

2013-08-01

Full Text Available Teamwork has become an integral part of most organisations today, and it is clearly important in Science and other disciplines. In Science, research teams increase in size while the number of single-authored papers and patents decline. Team-work in laboratory sciences permits projects that are too big or complex for one individual to be tackled. This development requires that students gain experience of team-work before they start their professional career. Students working in teams this may increase productivity, confidence, innovative capacity and improvement of interpersonal skills. Problem-based learning (PBL is an instructional approach focusing on real analytical problems as a means of training an analytical scientist. PBL may have a positive impact on team-work skills that are important for undergraduates and postgraduates to enable effective collaborative work. This survey of the current literature explores the development of the team-work skills in Biomedical Science students using PBL.

"The Fly on the Wall" Reflecting Team Supervision.

Science.gov (United States)

Prest, Layne E.; And Others

1990-01-01

Adapts reflecting team concept, a practical application of constructivist ideas, for use in group supervision. Evolving model includes a focus on the unique "fly on the wall" perspective of the reflecting team. Trainees are introduced to a multiverse of new ideas and perspectives in a context which integrates some of the most challenging…

Assessing the facilitators and barriers of interdisciplinary team working in primary care using normalisation process theory: An integrative review

Science.gov (United States)

O’Reilly, Pauline; Lee, Siew Hwa; O’Sullivan, Madeleine; Cullen, Walter; Kennedy, Catriona; MacFarlane, Anne

2017-01-01

Background Interdisciplinary team working is of paramount importance in the reform of primary care in order to provide cost-effective and comprehensive care. However, international research shows that it is not routine practice in many healthcare jurisdictions. It is imperative to understand levers and barriers to the implementation process. This review examines interdisciplinary team working in practice, in primary care, from the perspective of service providers and analyses 1 barriers and facilitators to implementation of interdisciplinary teams in primary care and 2 the main research gaps. Methods and findings An integrative review following the PRISMA guidelines was conducted. Following a search of 10 international databases, 8,827 titles were screened for relevance and 49 met the criteria. Quality of evidence was appraised using predetermined criteria. Data were analysed following the principles of framework analysis using Normalisation Process Theory (NPT), which has four constructs: sense making, enrolment, enactment, and appraisal. The literature is dominated by a focus on interdisciplinary working between physicians and nurses. There is a dearth of evidence about all NPT constructs apart from enactment. Physicians play a key role in encouraging the enrolment of others in primary care team working and in enabling effective divisions of labour in the team. The experience of interdisciplinary working emerged as a lever for its implementation, particularly where communication and respect were strong between professionals. Conclusion A key lever for interdisciplinary team working in primary care is to get professionals working together and to learn from each other in practice. However, the evidence base is limited as it does not reflect the experiences of all primary care professionals and it is primarily about the enactment of team working. We need to know much more about the experiences of the full network of primary care professionals regarding all aspects

Macro-level integrated renewable energy production schemes for sustainable development

International Nuclear Information System (INIS)

Subhadra, Bobban G.

2011-01-01

The production of renewable clean energy is a prime necessity for the sustainable future existence of our planet. However, because of the resource-intensive nature, and other challenges associated with these new generation renewable energy sources, novel industrial frameworks need to be co-developed. Integrated renewable energy production schemes with foundations on resource sharing, carbon neutrality, energy-efficient design, source reduction, green processing plan, anthropogenic use of waste resources for the production green energy along with the production of raw material for allied food and chemical industries is imperative for the sustainable development of this sector especially in an emission-constrained future industrial scenario. To attain these objectives, the scope of hybrid renewable production systems and integrated renewable energy industrial ecology is briefly described. Further, the principles of Integrated Renewable Energy Park (IREP) approach, an example for macro-level energy production, and its benefits and global applications are also explored. - Research highlights: → Discusses the need for macro-level renewable energy production schemes. → Scope of hybrid and integrated industrial ecology for renewable energy production. → Integrated Renewable Energy Parks (IREPs): A macro-level energy production scheme. → Discusses the principle foundations and global applications of IREPs. → Describes the significance of IREPs in the carbon-neutral future business arena.

An Integrated Methodology for Emulsified Formulated Product Design

DEFF Research Database (Denmark)

Mattei, Michele

are mixed together to determine the desired emulsified product. They are still mainly designed and analysed through trial - and - error based exper- imental techniques, therefore a systematic approach , integrating model-based as well a s experiment - based techniques, for design of these products could......The consumer oriented chemical based products are used every day by millions of people. They are structured products constituted of numerous chemicals, and many of them, especially household and personal care products, are emulsions where active ingredients, solvents, additives and surfactants...... significantly reduce both time and cost connected to product development by doing only the necessary experi- ments , and ensuring chances for innovation . The main contribution of this project i s the development of an integrated methodology for the design of emulsified formulated products. The methodology...

Teams That Work: Preparing Student Teams for the Workplace

Science.gov (United States)

Galbraith, Diane D.; Webb, Fred L.

2013-01-01

Organizations today often require collaboration in the form of work teams. Many tasks completed within organizations, whether in the workplace or in academia, however, can be beyond the capabilities of individuals alone. Productive teamwork and cooperative activities in business are expected and can begin very early in a person's career. The…

Validation of the Consumer Values versus Perceived Product Attributes Model Measuring the Purchase of Athletic Team Merchandise

Science.gov (United States)

Lee, Donghun; Byon, Kevin K.; Schoenstedt, Linda; Johns, Gary; Bussell, Leigh Ann; Choi, Hwansuk

2012-01-01

Various consumer values and perceived product attributes trigger consumptive behaviors of athletic team merchandise (Lee, Trail, Kwon, & Anderson, 2011). Likewise, using a principal component analysis technique on a student sample, a measurement scale was proposed that consisted of nine factors affecting the purchase of athletic team…

Integrals of products of spherical functions

International Nuclear Information System (INIS)

Veverka, O.

1975-01-01

Various branches of mathematical physics use integral formulas of the products of spherical functions. In quantum mechanics and in transport theory the integrals ∫sub((4π))dΩ vectorYsub(s)sup(t)(Ω vector)Ysub(l)sup(k)(Ω vector)Ysub(n)sup(m)(Ω vector), ∫sub(-1)sup(1)dμPsub(s)sup(t)(μ)Psub(l)sup(k)(μ)Psub(n)sup(m)(μ), ∫sub(-1)sup(1)dμPsub(s)(μ)Psub(l)(μ)Psub(n)(μ) are generally applied, where Ysub(α)sup(β)(Ω vector) are spherical harmonics, Psub(α)sup(β)(μ) are associated Legendre functions, and Psub(α)(μ) are Legendre polynomials. In the paper, the general procedure of calculating the integrals of the products of any combination of spherical functions is given. The procedure is referred to in a report on the boundary conditions for the cylindrical geometry in neutron transport theory for both the outer and inner cylindrical boundaries. (author)

Towards Integrated Product and Package Development

OpenAIRE

Bramklev, Caroline

2007-01-01

The global company operates from a number of locations worldwide, resulting in implications for the transport, handling and storage of product and parts transported within the company as well as between the company divisions and suppliers and/or consumers. In these companies, the package becomes a frequently used object to complement product features and achieve an effective and efficient means of logistics. In this context, it is interesting to integrate package development in the product...

Team Building e a enfermagem Team Building e enfermería Team Building and nursing

Directory of Open Access Journals (Sweden)

Filipa Homem

2012-07-01

: profundizar los conocimientos sobre Team Building, contextualizar el Team Building y reflexionar sobre su utilidad del Team Building en su contexto dentro de las prestaciones de atención de enfermería. De este modo, se realizaron búsquedas en la base de datos electrónica EBSCO, y se consultó la literatura relacionada con la psicología organizacional. Con esta investigación se concluyó que la estrategia de dinamización de equipo es útil aplicada a la enfermería, puede incluso mejorar la comunicación y las relaciones interpersonales, identificar fortalezas y debilidades de los equipos, proporcionar una mayor satisfacción en el trabajo y así, mejorar la calidad la atención sanitaria prestada.In this environment of growing dissatisfaction and unpredictability in nursing, it is increasingly important to motivate teams, giving them personal, relational, and communicative competencies and, above all, to build team working and thus improve productivity. Team Building emerges as an effective strategy to achieve positive results within organizations. Because it is a strategy not yet widely used in Portugal, we decided to look into the issue and reflect on its relevance and potential in nursing teams with the following objectives: to deepen knowledge about Team Building, to frame Team Building within the context of organizational theories, to describe different models of Team Building and to reflect on the usefulness of Team Building for the quality of nursing care. Articles were searched in EBSCO electronic databases, and organizational psychology literature was consulted. With this research, we conclude that Team Building applied to nursing can improve communication and interpersonal relationships, identify strengths and weaknesses of teams, provide greater job satisfaction and thus enhance the quality of health care provided.

Integrated product development: Competencies meet and products arise

DEFF Research Database (Denmark)

Jensen, Birger Boutrup; Stacey, Julia

2000-01-01

and process competencies throughout the whole development process. Of course, this is easier said than done but integrating various competencies into the product development prepares the ground for a better balance and consequently more products. Databases, for instance are a good example of a tool that can...... the development process and diminish the risk of inventing sliced bread once again. Furthermore the databases may be used as a foundation for a more effective and frictionless communication across departments. The project has its starting point in case studies of three Danish food companies. A research group...

Identification of the benefits, enablers and barriers to integrating junior pharmacists into the ward team within one UK-based hospital

Directory of Open Access Journals (Sweden)

Hung MY

2017-11-01

Full Text Available Man Yui Hung,1 David John Wright,2 Jeanette Blacklock,2 Richard John Needle1,2 1Pharmacy Department, Colchester Hospital University NHS Foundation Trust, Colchester, 2School of Pharmacy, University of East Anglia, Norwich, UK Introduction: A high nurse-vacancy rate combined with high numbers of applications for junior pharmacist roles resulted in Colchester Hospital University National Health System Foundation Trust trial employing junior pharmacists into traditional nursing posts with the aim of integrating pharmacists into the ward team and enhancing local medicines optimization. The aim of the evaluation was to describe the implementation process and practice of the integrated care pharmacists (ICPs in order to inform future innovations of a similar nature.Methods: Four band 6 ward-based ICPs were employed on two wards funded within current ward staffing expenditure. With ethical committee approval, interviews were undertaken with the ICPs and focus groups with ward nurses, senior ward nurses and members of the medical team. Data were analyzed thematically to identify service benefits, barriers and enablers. Routine ward performance data were obtained from the two ICP wards and two wards selected as comparators. Appropriate statistical tests were performed to identify differences in performance.Results: Four ICPs were interviewed, and focus groups were undertaken with three junior nurses, four senior nurses and three medical practitioners. Service enablers were continuous ward time, undertaking drug administration, positive feedback and use of effective communication methods. Barriers were planning, funding model, career development, and interprofessional working and social isolation. ICPs were believed to save nurse time and improve medicines safety. The proportion of patients receiving medicine reconciliation within 24 hours increased significantly in the ICP wards. All ICPs had resigned from their role within 12 months.Discussion: It was

Why developers are slacking off : understanding how software teams use slack

NARCIS (Netherlands)

Lin, B.; Zagalsky, A.; Storey, M.-A.D.; Serebrenik, A.

2016-01-01

Slack is a modern communication platform for teams that is seeing wide and rapid adoption by software develop-ment teams. Slack not only facilitates team messaging and archiving, but it also supports a wide plethora of inte-grations to external services and bots. We have found that Slack and its

Towards a Strategic Understanding of Global Teams and Their HR Implications

DEFF Research Database (Denmark)

Butler, Christina Lea; Minbaeva, Dana; Mäkelä, Kristiina

2018-01-01

and their constituent members to overcome the new and considerable challenges of global teams. These challenges span levels of analysis, time and space. Next we debate global teams as a strategic response to the dual pressures of global integration and local adaptation. We consider what HRM is needed for global teams...

Integrated durability process in product development

International Nuclear Information System (INIS)

Pompetzki, M.; Saadetian, H.

2002-01-01

This presentation describes the integrated durability process in product development. Each of the major components of the integrated process are described along with a number of examples of how integrated durability assessment has been used in the ground vehicle industry. The durability process starts with the acquisition of loading information, either physically through loads measurement or virtually through multibody dynamics. The loading information is then processed and characterized for further analysis. Durability assessment was historically test based and completed through field or laboratory evaluation. Today, it is common that both the test and CAE environments are used together in durability assessment. Test based durability assessment is used for final design sign-off but is also critically important for correlating CAE models, in order to investigate design alternatives. There is also a major initiative today to integrate the individual components into a process, by linking applications and providing a framework to communicate information as well as manage all the data involved in the entire process. Although a single process is presented, the details of the process can vary significantly for different products and applications. Recent applications that highlight different parts of the durability process are given. As well as an example of how integration of software tools between different disciplines (MBD, FE and fatigue) not only simplifies the process, but also significantly improves it. (author)

Multimodal interaction for human-robot teams

Science.gov (United States)

Burke, Dustin; Schurr, Nathan; Ayers, Jeanine; Rousseau, Jeff; Fertitta, John; Carlin, Alan; Dumond, Danielle

2013-05-01

Unmanned ground vehicles have the potential for supporting small dismounted teams in mapping facilities, maintaining security in cleared buildings, and extending the team's reconnaissance and persistent surveillance capability. In order for such autonomous systems to integrate with the team, we must move beyond current interaction methods using heads-down teleoperation which require intensive human attention and affect the human operator's ability to maintain local situational awareness and ensure their own safety. This paper focuses on the design, development and demonstration of a multimodal interaction system that incorporates naturalistic human gestures, voice commands, and a tablet interface. By providing multiple, partially redundant interaction modes, our system degrades gracefully in complex environments and enables the human operator to robustly select the most suitable interaction method given the situational demands. For instance, the human can silently use arm and hand gestures for commanding a team of robots when it is important to maintain stealth. The tablet interface provides an overhead situational map allowing waypoint-based navigation for multiple ground robots in beyond-line-of-sight conditions. Using lightweight, wearable motion sensing hardware either worn comfortably beneath the operator's clothing or integrated within their uniform, our non-vision-based approach enables an accurate, continuous gesture recognition capability without line-of-sight constraints. To reduce the training necessary to operate the system, we designed the interactions around familiar arm and hand gestures.

Product market integration, rents and wage inequality

DEFF Research Database (Denmark)

Andersen, Torben M.; Sørensen, Allan

"protection" and "specialization" rents. In particular, wage inequality among similar workers (residual wage inequality) may be U-shaped, at first decreasing and then increasing in the process of product market integration. Consequently, there may be gains in both the efficiency and the equity dimension until......Globalization in the form of product market integration affects labour markets and produces winners and losers. While there are aggregate gains, it is in general ambiguous how inequality is affected. We explore this issue in a Ricardian model and show that it depends on the balance between...

There's no team in I: How observers perceive individual creativity in a team setting.

Science.gov (United States)

Kay, Min B; Proudfoot, Devon; Larrick, Richard P

2018-04-01

Creativity is highly valued in organizations as an important source of innovation. As most creative projects require the efforts of groups of individuals working together, it is important to understand how creativity is perceived for team products, including how observers attribute creative ability to focal actors who worked as part of a creative team. Evidence from three experiments suggests that observers commit the fundamental attribution error-systematically discounting the contribution of the group when assessing the creative ability of a single group representative, particularly when the group itself is not visually salient. In a pilot study, we found that, in the context of the design team at Apple, a target group member visually depicted alone is perceived to have greater personal creative ability than when he is visually depicted with his team. In Study 1, using a sample of managers, we conceptually replicated this finding and further observed that, when shown alone, a target member of a group that produced a creative product is perceived to be as creative as an individual described as working alone on the same output. In Study 2, we replicated the findings of Study 1 and also observed that a target group member depicted alone, rather than with his team, is also attributed less creative ability for uncreative group output. Findings are discussed in light of how overattribution of individual creative ability can harm organizations in the long run. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Enhanced canopy fuel mapping by integrating lidar data

Science.gov (United States)

Peterson, Birgit E.; Nelson, Kurtis J.

2016-10-03

BackgroundThe Wildfire Sciences Team at the U.S. Geological Survey’s Earth Resources Observation and Science Center produces vegetation type, vegetation structure, and fuel products for the United States, primarily through the Landscape Fire and Resource Management Planning Tools (LANDFIRE) program. LANDFIRE products are used across disciplines for a variety of applications. The LANDFIRE data retain their currency and relevancy through periodic updating or remapping. These updating and remapping efforts provide opportunities to improve the LANDFIRE product suite by incorporating data from other sources. Light detection and ranging (lidar) is uniquely suitable for gathering information on vegetation structure and spatial arrangement because it can collect data in three dimensions. The Wildfire Sciences Team has several completed and ongoing studies focused on integrating lidar into vegetation and fuels mapping.

Team table: a framework and tool for continuous factory planning

Science.gov (United States)

Sihn, Wilfried; Bischoff, Juergen; von Briel, Ralf; Josten, Marcus

2000-10-01

Growing market turbulences and shorter product life cycles require a continuous adaptation of factory structures resulting in a continuous factory planning process. Therefore a new framework is developed which focuses on configuration and data management process integration. This enable an online system performance evaluation based on continuous availability of current data. The use of this framework is especially helpful and will guarantee high cost and time savings, when used in the early stages of the planning, called the concept or rough planning phase. The new framework is supported by a planning round table as a tool for team-based configuration processes integrating the knowledge of all persons involved in planning processes. A case study conducted at a German company shows the advantages which can be achieved by implementing the new framework and methods.

IRREVERSIBILITY GENERATION IN SUGAR, ALCOHOL AND BIOGAS INTEGRATED PRODUCTIONS

OpenAIRE

Meilyn González Cortés; Yenisleidy Martínez Martínez; Yailet Albernas Carvajal; Raúl A. Pérez Bermúdez

2017-01-01

In this work, the stages of losses and lower exergetic efficiency are determined when the sugar production process is integrated with others for the production of products such as biogas, torula yeast and electricity. The study is carried out in three scenarios of integrated processes for obtaining the indicated products. A sugar factory in which sugar and electricity are produced is considered as the base scenario and from this; a second scenario is inferred in which alcohol is produced from...

Rules for integrals over products of distributions from coordinate independence of path integrals

International Nuclear Information System (INIS)

Kleinert, H.; Chervyakov, A.

2001-01-01

In perturbative calculations of quantum-mechanical path integrals in curvilinear coordinates, one encounters Feynman diagrams involving multiple temporal integrals over products of distributions which are mathematically undefined. In addition, there are terms proportional to powers of Dirac δ-functions at the origin coming from the measure of path integration. We derive simple rules for dealing with such singular terms from the natural requirement of coordinate independence of the path integrals. (orig.)

Trauma teams and time to early management during in situ trauma team training.

Science.gov (United States)

Härgestam, Maria; Lindkvist, Marie; Jacobsson, Maritha; Brulin, Christine; Hultin, Magnus

2016-01-29

To investigate the association between the time taken to make a decision to go to surgery and gender, ethnicity, years in profession, experience of trauma team training, experience of structured trauma courses and trauma in the trauma team, as well as use of closed-loop communication and leadership styles during trauma team training. In situ trauma team training. The patient simulator was preprogrammed to represent a severely injured patient (injury severity score: 25) suffering from hypovolemia due to external trauma. An emergency room in an urban Scandinavian level one trauma centre. A total of 96 participants were divided into 16 trauma teams. Each team consisted of six team members: one surgeon/emergency physician (designated team leader), one anaesthesiologist, one registered nurse anaesthetist, one registered nurse from the emergency department, one enrolled nurse from the emergency department and one enrolled nurse from the operating theatre. HRs with CIs (95% CI) for the time taken to make a decision to go to surgery was computed from a Cox proportional hazards model. Three variables remained significant in the final model. Closed-loop communication initiated by the team leader increased the chance of a decision to go to surgery (HR: 3.88; CI 1.02 to 14.69). Only 8 of the 16 teams made the decision to go to surgery within the timeframe of the trauma team training. Conversely, call-outs and closed-loop communication initiated by the team members significantly decreased the chance of a decision to go to surgery, (HR: 0.82; CI 0.71 to 0.96, and HR: 0.23; CI 0.08 to 0.71, respectively). Closed-loop communication initiated by the leader appears to be beneficial for teamwork. In contrast, a high number of call-outs and closed-loop communication initiated by team members might lead to a communication overload. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

Performance assessment task team progress report

International Nuclear Information System (INIS)

Wood, D.E.; Curl, R.U.; Armstrong, D.R.; Cook, J.R.; Dolenc, M.R.; Kocher, D.C.; Owens, K.W.; Regnier, E.P.; Roles, G.W.; Seitz, R.R.

1994-05-01

The U.S. Department of Energy (DOE) Headquarters EM-35, established a Performance Assessment Task Team (referred to as the Team) to integrate the activities of the sites that are preparing performance assessments (PAs) for disposal of new low-level waste, as required by Chapter III of DOE Order 5820.2A, open-quotes Low-Level Waste Managementclose quotes. The intent of the Team is to achieve a degree of consistency among these PAs as the analyses proceed at the disposal sites. The Team's purpose is to recommend policy and guidance to the DOE on issues that impact the PAs, including release scenarios and parameters, so that the approaches are as consistent as possible across the DOE complex. The Team has identified issues requiring attention and developed discussion papers for those issues. Some issues have been completed, and the recommendations are provided in this document. Other issues are still being discussed, and the status summaries are provided in this document. A major initiative was to establish a subteam to develop a set of test scenarios and parameters for benchmarking codes in use at the various sites. The activities of the Team are reported here through December 1993

Product market integration, tax distortions and public sector size

DEFF Research Database (Denmark)

Andersen, Torben M.; Sørensen, Allan

of product market integration for the public sector are far from straightforward. The reason is gains-from-trade effects which tend to increase the tax base and decrease the opportunity costs of public consumption (marginal utility of private consumption falls). It follows that the retrenchment view...... that product market integration inevitable leads to a downward pressure on public sector activities does not get support in a standard setting. A particularly noteworthy finding is that a country with a large public sector (strong preferences for public consumption) may benefit more by integrating......The implications of product market integration for public sector activities (transfers and public consumption) are considered in a standard setting. The analysis supports that a larger public sector (higher tax rate) tends to increase wages and worsen wage competitiveness. However, the implications...

One System Integrated Project Team Progress in Coordinating Hanford Tank Farms and the Waste Treatment Plant

International Nuclear Information System (INIS)

Skwarek, Raymond J.; Harp, Ben J.; Duncan, Garth M.

2013-01-01

The One System Integrated Project Team (IPT) was formed at the Hanford Site in late 2011 as a way to improve coordination and itegration between the Hanford Tank Waste Treatment and Immobilization Plant (WTP) and the Tank Operations Contractor (TOC) on interfaces between the two projects, and to eliminate duplication and exploit opportunities for synergy. The IPT is composed of jointly staffed groups that work on technical issues of mutal interest, front-end design and project definition, nuclear safety, plant engineering system integration, commissioning, planning and scheduling, and environmental, safety, health and quality (ESH&Q) areas. In the past year important progress has been made in a number of areas as the organization has matured and additional opportunities have been identified. Areas covered in this paper include: Support for development of the Office of Envirnmental Management (EM) framework document to progress the Office of River Protection's (ORP) River Protection Project (RPP) mission; Stewardship of the RPP flowsheet; Collaboration with Savannah River Site (SRS), Savannah River National Laboratory (SRNL), and Pacific Northwest National Laboratory (PNNL); Operations programs integration; and, Further development of the waste acceptance criteria

Team incentives in relational contracts

International Nuclear Information System (INIS)

Kvaloey, Ola

2003-01-01

Incentive schemes for teams are compared. I ask: under which conditions are relational incentive contracts based on joint performance evaluation, relative performance evaluation and independent performance evaluation self-enforceable. The framework of Che and Yoo (2001) on team incentives is combined with the framework of Baker, Gibbons and Murphy (2002) on relational contracts. In a repeated game between one principal and two agents, I find that incentives based on relative or independent performance are expected to dominate when the productivity of effort is high, while joint performance evaluation dominates when productivity is low. Incentives based on independent performance are more probable if the agents own critical assets. (author)

Chronic care coordination by integrating care through a team-based, population-driven approach: a case study.

Science.gov (United States)

van Eeghen, Constance O; Littenberg, Benjamin; Kessler, Rodger

2018-05-23

Patients with chronic conditions frequently experience behavioral comorbidities to which primary care cannot easily respond. This study observed a Vermont family medicine practice with integrated medical and behavioral health services that use a structured approach to implement a chronic care management system with Lean. The practice chose to pilot a population-based approach to improve outcomes for patients with poorly controlled Type 2 diabetes using a stepped-care model with an interprofessional team including a community health nurse. This case study observed the team's use of Lean, with which it designed and piloted a clinical algorithm composed of patient self-assessment, endorsement of behavioral goals, shared documentation of goals and plans, and follow-up. The team redesigned workflows and measured reach (patients who engaged to the end of the pilot), outcomes (HbA1c results), and process (days between HbA1c tests). The researchers evaluated practice member self-reports about the use of Lean and facilitators and barriers to move from pilot to larger scale applications. Of 20 eligible patients recruited over 3 months, 10 agreed to participate and 9 engaged fully (45%); 106 patients were controls. Relative to controls, outcomes and process measures improved but lacked significance. Practice members identified barriers that prevented implementation of all changes needed but were in agreement that the pilot produced useful outcomes. A systematized, population-based, chronic care management service is feasible in a busy primary care practice. To test at scale, practice leadership will need to allocate staffing, invest in shared documentation, and standardize workflows to streamline office practice responsibilities.

A team-based approach to autopsy education: integrating anatomic and clinical pathology at the rotation level.

Science.gov (United States)

Hébert, Tiffany Michele; Maleki, Sara; Vasovic, Ljiljana V; Arnold, Jeffrey L; Steinberg, Jacob J; Prystowsky, Michael B

2014-03-01

Pathology residency training programs should aim to teach residents to think beyond the compartmentalized data of specific rotations and synthesize data in order to understand the whole clinical picture when interacting with clinicians. To test a collaborative autopsy procedure at Montefiore Medical Center (Bronx, New York), linking residents and attending physicians from anatomic and clinical pathology in the autopsy process from the initial chart review to the final report. Residents consult with clinical pathology colleagues regarding key clinical laboratory findings during the autopsy. This new procedure serves multiple functions: creating a team-based, mutually beneficial educational experience; actively teaching consultative skills; and facilitating more in-depth analysis of the clinical laboratory findings in autopsies. An initial trial of the team-based autopsy system was done from November 2010 to December 2012. Residents were then surveyed via questionnaire to evaluate the frequency and perceived usefulness of clinical pathology autopsy consultations. Senior residents were the most frequent users of clinical pathology autopsy consultation. The most frequently consulted services were microbiology and chemistry. Eighty-nine percent of the residents found the clinical pathology consultation to be useful in arriving at a final diagnosis and clinicopathologic correlation. The team-based autopsy is a novel approach to integration of anatomic and clinical pathology curricula at the rotation level. Residents using this approach develop a more holistic approach to pathology, better preparing them for meaningful consultative interaction with clinicians. This paradigm shift in training positions us to better serve in our increasing role as arbiters of outcomes measures in accountable care organizations.

Integrated Assessment by the People: Insights from AgMIP Regional Teams in Sub-Saharan Africa and South Asia

Science.gov (United States)

Antle, J. M.

2017-12-01

AgMIP has developed innovative protocol-based methods for regional integrated assessment (RIA) that can be implemented by national researchers working with local and national stakeholders (http://www.agmip.org/regional-integrated-assessments-handbook/). The approach has been implemented by regional teams in Sub-Saharan Africa and South Asia. This presentation first summarizes novel elements of the AgMIP RIA methods, and their strengths and limitations, based on their application by AgMIP researchers. Key insights from the application of these methods for climate impact and adaptation in Sub-Saharan Africa and South Asia are presented. A major finding is that detailed, site-specific, systems-based analysis show much more local and regional variation in impacts than studies based on analysis of individual crops, and provide the basis for analysis of multi-faceted technology and policy options to facilitate the transition to sustainable and resilient development pathways. The presentation concludes with observations about advancing integrated assessments carried out by and for national and local researchers and stakeholders.

Development of Integrative STEM Curriculum: A Multiple Case Study of Multi-Disciplinary Teams in Two Pennsylvania High Schools

Science.gov (United States)

Rider-Bertrand, Joey H.

At the start of the 21st century, STEM education was a new priority in many schools as the focus shifted from separate disciplines to integrative STEM education. Unfortunately, there was limited research to offer guidance to practitioners (Brown, 2012; Honey, Pearson & Schweingruber, 2014). This qualitative, multiple case study explored the experiences of two multi-disciplinary teams of secondary teachers from Pennsylvania who developed and implemented integrative STEM curriculum. Four teachers from a rural high school and four teachers from a suburban high school participated in the study. A document review of integrative STEM curriculum and semi-structured interviews were conducted to learn about the curriculum development process and teachers' perceptions regarding conditions that support or hinder success. Individual and cross-case analyses were performed to establish findings and themes. Although the individual case themes varied slightly, the cross-case themes and assertions that emerged provided highly sought after guidance to practitioners and added to the limited body of research on integrative STEM education. This study found that current curriculum models do not fit integrative STEM curriculum, the development process is fluid, and substantial administrative support and resources are necessary to develop, implement, and sustain integrative STEM education programs. The results offered implications for all educators, as well as two examples of how teachers navigated the terrain of integrative STEM curriculum.

Integrative Production Technology for High-Wage Countries

CERN Document Server

2012-01-01

Industrial production in high-wage countries like Germany is still at risk. Yet, there are many counter-examples in which producing companies dominate their competitors by not only compensating for their specific disadvantages in terms of factor costs (e.g. wages, energy, duties and taxes) but rather by minimising waste using synchronising integrativity as well as by obtaining superior adaptivity on alternating conditions. In order to respond to the issue of economic sustainability of industrial production in high-wage countries, the leading production engineering and material research scientists of RWTH Aachen University together with renowned companies have established the Cluster of Excellence “Integrative Production Technology for High-Wage Countries”. This compendium comprises the cluster’s scientific results as well as a selection of business and technology cases, in which these results have been successfully implemented into industrial practice in close cooperation with more than 30 companies of ...

Knowledge integration, teamwork and performance in health care.

Science.gov (United States)

Körner, Mirjam; Lippenberger, Corinna; Becker, Sonja; Reichler, Lars; Müller, Christian; Zimmermann, Linda; Rundel, Manfred; Baumeister, Harald

2016-01-01

Knowledge integration is the process of building shared mental models. The integration of the diverse knowledge of the health professions in shared mental models is a precondition for effective teamwork and team performance. As it is known that different groups of health care professionals often tend to work in isolation, the authors compared the perceptions of knowledge integration. It can be expected that based on this isolation, knowledge integration is assessed differently. The purpose of this paper is to test these differences in the perception of knowledge integration between the professional groups and to identify to what extent knowledge integration predicts perceptions of teamwork and team performance and to determine if teamwork has a mediating effect. The study is a multi-center cross-sectional study with a descriptive-explorative design. Data were collected by means of a staff questionnaire for all health care professionals working in the rehabilitation clinics. The results showed that there are significant differences in knowledge integration within interprofessional health care teams. Furthermore, it could be shown that knowledge integration is significantly related to patient-centered teamwork as well as to team performance. Mediation analysis revealed partial mediation of the effect of knowledge integration on team performance through teamwork. PRACTICAL/IMPLICATIONS: In practice, the results of the study provide a valuable starting point for team development interventions. This is the first study that explored knowledge integration in medical rehabilitation teams and its relation to patient-centered teamwork and team performance.

Primary care team working in Ireland: a qualitative exploration of team members' experiences in a new primary care service.

Science.gov (United States)

Kennedy, Norelee; Armstrong, Claire; Woodward, Oonagh; Cullen, Walter

2015-07-01

Team working is an integral aspect of primary care, but barriers to effective team working can limit the effectiveness of a primary care team (PCT). The establishment of new PCTs in Ireland provides an excellent opportunity to explore team working in action. The aim of this qualitative study was to explore the experiences of team members working in a PCT. Team members (n = 19) from two PCTs were interviewed from May to June 2010 using a semi-structured interview guide. All interviews were audio-recorded and transcribed. Data were analysed using NVivo (version 8). Thematic analysis was used to explore the data. We identified five main themes that described the experiences of the team members. The themes were support for primary care, managing change, communication, evolution of roles and benefits of team working. Team members were generally supportive of primary care and had experienced benefits to their practice and to the care of their patients from participation in the team. Regular team meetings enabled communication and discussion of complex cases. Despite the significant scope for role conflict due to the varied employment arrangements of the team members, neither role nor interpersonal conflict was evident in the teams studied. In addition, despite the unusual team structure in Irish PCTs - where there is no formally appointed team leader or manager - general issues around team working and its benefits and challenges were very similar to those found in other international studies. This suggests, in contrast to some studies, that some aspects of the leadership role may not be as important in successful PCT functioning as previously thought. Nonetheless, team leadership was identified as an important issue in the further development of the teams. © 2014 John Wiley & Sons Ltd.

Product Market Integration, Comparative Advantages and Labour Market Performance

DEFF Research Database (Denmark)

Andersen, Torben M.; Rose Skaksen, Jan

2003-01-01

Product Market Integration, Comparative Advantages andLabour Market Performance@*In a two-country model with trade driven by comparative advantages, it is considered howimperfectly competitive labour markets are affected by lower frictions in international goodstrade. Easier goods trading...... is equivalent to increased mobility of employment acrosscountries and thus a change in the trade-off between wages and employment faced by wagesetters. While the effects of product market integration on the trade-off between wages andemployment in general is ambiguous, it is shown that product market...... integration works like ageneral improvement in productivity via the specialization it allows through trade.Unambiguously, real wages and employment and welfare improve upon reductions in tradefrictions, and therefore workers are better off irrespective of whether the market power ofunions is enhanced or muted...

Understanding the Effects of Team Cognition Associated with Complex Engineering Tasks: Dynamics of Shared Mental Models, Task-SMM, and Team-SMM

Science.gov (United States)

Lee, Miyoung; Johnson, Tristan E.

2008-01-01

This study investigates how shared mental models (SMMs) change over time in teams of students in a manufacturing engineering course. A complex ill-structured project was given to each team. The objective of the team project was to analyze, test, and propose ways to improve their given manufactured product. Shared mental models were measured in…

Mutual goals as essential for the results of team coaching

DEFF Research Database (Denmark)

Pedersen, Louise Møller

2015-01-01

Background: Facilitated by an external coach, team coaching has been introduced as a method to increase team competency, effectiveness, and learning mainly at the middle manager level (named coachees). However, team coaching also has some pitfalls which will be explored in this chapter. Intervent......, organizational changes can interrupt the implementation of team coaching interventions. Clear communication and resolution of conflict s are essential for the process and results of team coaching and should be integrated into the theory of team coaching.......Background: Facilitated by an external coach, team coaching has been introduced as a method to increase team competency, effectiveness, and learning mainly at the middle manager level (named coachees). However, team coaching also has some pitfalls which will be explored in this chapter....... Intervention: A 13 month team coaching intervention focusing on team safety-related competences, effectiveness, and learning was conducted in three department teams (team X, Y and Z) in a medium-sized Danish company (Company A). However, at the end of the intervention results between the three teams varied...

Team work on international projects

International Nuclear Information System (INIS)

Hayfield, F.

1983-01-01

A successful team will result in Project efficiency and so lead to a better achievement of the Project objectives. Such a team will be self-motivating and have a high level of morale. An effective team will also create a better context for transfer of know-how and so better prepare its members for greater roles on future Project teams. The nature of Project work forces the process of team building to recognize several facts of life. A Project team can have a life as short as one year and as long as ten years. A team usually consists of people on temporary transfer from different departments yet retaining a link of some sort to their departments of origin. It may consist of members of one company only or of several as in a joint-venture and may include Client personnel. On International Projects, the members of a team may have different nationalities and be working in a language foreign to many of them. Many of the Project people may be expatriates to the Project area on a bachelor or on a married status well away from their head or usual office. Team building is a complex organizational and human process, with no mathematical formula for the ideal solution. It starts with the selection of the right Project Manager who should be a leader, a technocrat manager and an integrator all at the same time. The Project Manager must have the authority to create the organizational and human climate that will motivate to a maximum each member of the team. Each member must understand clearly his role and realize that this contribution to the Project will influence his career development. Loyalty to the Project Manager must be possible and the Departmental Manager has to recognize this necessity. This presentation will indicate the basic steps of a team building process on a typical major international Project

When Teams Fail to Self-Regulate: Predictors and Outcomes of Team Procrastination Among Debating Teams.

Science.gov (United States)

Van Hooft, Edwin A J; Van Mierlo, Heleen

2018-01-01

Models of team development have indicated that teams typically engage in task delay during the first stages of the team's life cycle. An important question is to what extent this equally applies to all teams, or whether there is variation across teams in the amount of task delay. The present study introduces the concept of team procrastination as a lens through which we can examine whether teams collectively engage in unplanned, voluntary, and irrational delay of team tasks. Based on theory and research on self-regulation, team processes, and team motivation we developed a conceptual multilevel model of predictors and outcomes of team procrastination. In a sample of 209 student debating teams, we investigated whether and why teams engage in collective procrastination as a team, and what consequences team procrastination has in terms of team member well-being and team performance. The results supported the existence of team procrastination as a team-level construct that has some stability over time. The teams' composition in terms of individual-level trait procrastination, as well as the teams' motivational states (i.e., team learning goal orientation, team performance-approach goal orientation in interaction with team efficacy) predicted team procrastination. Team procrastination related positively to team members' stress levels, especially for those low on trait procrastination. Furthermore, team procrastination had an indirect negative relationship with team performance, through teams' collective stress levels. These findings add to the theoretical understanding of self-regulatory processes of teams, and highlight the practical importance of paying attention to team-level states and processes such as team goal orientation and team procrastination.

Strategies for effective collaborative manuscript development in interdisciplinary science teams

Science.gov (United States)

Oliver, Samantha K.; Fergus, C. Emi; Skaff, Nicholas K.; Wagner, Tyler; Tan, Pang-Ning; Cheruvelil, Kendra Spence; Soranno, Patricia A.

2018-01-01

Science is increasingly being conducted in large, interdisciplinary teams. As team size increases, challenges can arise during manuscript development, where achieving one team goal (e.g., inclusivity) may be in direct conflict with other goals (e.g., efficiency). Here, we present strategies for effective collaborative manuscript development that draw from our experiences in an interdisciplinary science team writing collaborative manuscripts for six years. These strategies are rooted in six guiding principles that were important to our team: to create a transparent, inclusive, and accountable research team that promotes and protects team members who have less power to influence decision‐making while fostering creativity and productivity. To help alleviate the conflicts that can arise in collaborative manuscript development, we present the following strategies: understand your team composition, create an authorship policy and discuss authorship early and often, openly announce manuscript ideas, identify and communicate the type of manuscript and lead author management style, and document and describe authorship contributions. These strategies can help reduce the probability of group conflict, uphold individual and team values, achieve fair authorship practices, and increase science productivity.

Developing leadership in rural interprofessional palliative care teams.

Science.gov (United States)

Hall, Pippa; Weaver, Lynda; Handfield-Jones, Richard; Bouvette, Maryse

2008-01-01

This project brought together community-based practitioners and academics to develop and deliver interventions designed to enhance the leadership abilities of the designated leaders of seven rural/small town-based palliative care teams. Members of these community-based teams have already gained recognition for their teams' leadership and service delivery in their communities. All of the teams had worked closely with most members of the academic team prior to this project. The team members participated in a needs assessment exercise developed by the Sisters of Charity of Ottawa Health Service and University of Ottawa academic team. Results of the needs assessment identified leadership qualities that had contributed to their success, as well as their needs to further enhance their individual leadership qualities. The team effort, however, was the most important factor contributing to the success of their work. The interventions developed to address the identified needs had to be adapted creatively through the collaborative efforts of both the community and academic teams. The educational interventions facilitated the integration of learning at the individual and community level into the busy work schedules of primary health care providers.

Working with sports organizations and teams.

Science.gov (United States)

McDuff, David R; Garvin, Michelle

2016-12-01

Athletes and coaches at all competitive levels will utilize sports performance and psychiatric services at very high rates if the services are offered on-site and free of charge and are broad in scope and culturally sensitive. Services should be available throughout the team year and cover areas such as team building, mental preparation, stress control, substance prevention, sleep and energy regulation, injury recovery, crisis intervention, and mental disorder treatment. The staff offering these services should be diverse by gender, profession, and culture, and the fees should be paid by the organization. When these services are endorsed by the team's leaders and integrated with the athletic training/medical/player development staff, their utilization will grow quickly and lead to positive outcomes individually and collectively.

Bring It to the Pitch: Combining Video and Movement Data to Enhance Team Sport Analysis.

Science.gov (United States)

Stein, Manuel; Janetzko, Halldor; Lamprecht, Andreas; Breitkreutz, Thorsten; Zimmermann, Philipp; Goldlucke, Bastian; Schreck, Tobias; Andrienko, Gennady; Grossniklaus, Michael; Keim, Daniel A

2018-01-01

Analysts in professional team sport regularly perform analysis to gain strategic and tactical insights into player and team behavior. Goals of team sport analysis regularly include identification of weaknesses of opposing teams, or assessing performance and improvement potential of a coached team. Current analysis workflows are typically based on the analysis of team videos. Also, analysts can rely on techniques from Information Visualization, to depict e.g., player or ball trajectories. However, video analysis is typically a time-consuming process, where the analyst needs to memorize and annotate scenes. In contrast, visualization typically relies on an abstract data model, often using abstract visual mappings, and is not directly linked to the observed movement context anymore. We propose a visual analytics system that tightly integrates team sport video recordings with abstract visualization of underlying trajectory data. We apply appropriate computer vision techniques to extract trajectory data from video input. Furthermore, we apply advanced trajectory and movement analysis techniques to derive relevant team sport analytic measures for region, event and player analysis in the case of soccer analysis. Our system seamlessly integrates video and visualization modalities, enabling analysts to draw on the advantages of both analysis forms. Several expert studies conducted with team sport analysts indicate the effectiveness of our integrated approach.

Designing Integrated Product- Service System Solutions in Manufacturing Industries

DEFF Research Database (Denmark)

Costa, Nina; Patrício, Lia; Morelli, Nicola

2015-01-01

Manufacturing firms are increasingly evolving towards the design of integrated product-service solutions but servitization literature does not provide specific guidance on how to design these integrated solutions. Building upon ProductService System (PSS) and Service Design (SD) approaches...... how it brings new insights to manufacturing companies moving to a service, value cocreation perspective....

Seeking the Important Nodes of Complex Networks in Product R&D Team Based on Fuzzy AHP and TOPSIS

Directory of Open Access Journals (Sweden)

Wei Zhang

2013-01-01

Full Text Available How to seek the important nodes of complex networks in product research and development (R&D team is particularly important for companies engaged in creativity and innovation. The previous literature mainly uses several single indicators to assess the node importance; this paper proposes a multiple attribute decision making model to tentatively solve these problems. Firstly, choose eight indicators as the evaluation criteria, four from centralization of complex networks: degree centrality, betweenness centrality, closeness centrality, and eigenvector centrality and four from structural holes of complex networks: effective size, efficiency, constraint, and hierarchy. Then, use fuzzy analytic hierarchy process (AHP to obtain the weights of these indicators and use technique for order preference by similarity to an ideal solution (TOPSIS to assess the importance degree of each node of complex networks. Finally, taking a product R&D team of a game software company as a research example, test the effectiveness, operability, and efficiency of the method we established.

Does Avatar Appearance Matter? How Team Visual Similarity and Member–Avatar Similarity Influence Virtual Team Performance

NARCIS (Netherlands)

van der Land, S.F.; Schouten, A.P.; Feldberg, J.F.M.; Huysman, M.H.; van den Hooff, B.J.

2015-01-01

This multimethod study investigated how avatar appearance influences virtual team performance. This study is the first to integrate the framework of social identity model of de-individuation effects (SIDE) and Self-Identification theory, using "morphing" techniques. Results were obtained from a 2

Technology Epiphany and an Integrated Product and Service

Directory of Open Access Journals (Sweden)

Satoru Goto

2017-07-01

Full Text Available This study aims at exploring how an integrated product and service contributes to achieving Innovation of Meaning (IoM or technology epiphany. Existing IoM studies have focused on intended meaning (as defined in new product development and ignored the received meaning that users reconstruct. The process by which a user assigns meaning to things can not only be static but also dynamic. This study focuses on integrated products and contexts offered by services and analyses the case of Japan’s largest manufacturer of ankle-foot orthoses. The results show that the service guides the users to reconstruct the meaning in dynamic cognitive processes and use the metaphors that contribute to the consistency between products and services.

Reported implementation lessons from a national quality improvement initiative; Productive Ward: Releasing Time to Care™. A qualitative, ward-based team perspective.

Science.gov (United States)

White, Mark; Butterworth, Tony; Wells, John S G

2017-10-01

To explore the experiences of participants involved in the implementation of the Productive Ward: Releasing Time to Care™ initiative in Ireland, identifying key implementation lessons. A large-scale quality improvement programme Productive Ward: Releasing Time to Care™ was introduced nationwide into Ireland in 2011. We captured accounts from ward-based teams in an implementation phase during 2013-14 to explore their experiences. Semi-structured, in-depth interviews with a purposive sample of 24 members of ward-based teams from nine sites involved in the second national phase of the initiative were conducted. Interviews were analysed and coded under themes, using a seven-stage iterative process. The predominant theme identified was associated with the implementation and management of the initiative and included: project management; training; preparation; information and communication; and participant's negative experiences. The most prominent challenge reported related to other competing clinical priorities. Despite the structured approach of Productive Ward: Releasing Time to Care™, it appears that overstretched and busy clinical environments struggle to provide the right climate and context for ward-based teams to engage and interact actively with quality improvement tools, methods and activities. Findings highlight five key aspects of implementation and management that will help facilitate successful adoption of large-scale, ward-based quality improvement programmes such as Productive Ward: Releasing Time to Care™. Utilising pre-existing implementation or quality frameworks to assess each ward/unit for 'readiness' prior to commencing a quality improvement intervention such as Productive Ward: Releasing Time to Care™ should be considered. © 2017 John Wiley & Sons Ltd.

On the logistics effects of integrated product and package design

DEFF Research Database (Denmark)

Bramklev, Caroline; Hansen, Claus Thorp

2007-01-01

obtaining error-free deliveries, saving costs and avoiding quality problems. Thus, the authors of this paper see a challenge in developing the theory and methodology for Integrated Product and Package Design. In this paper we take a first step in this direction. Firstly, we have carried out a broad review...... of literature, which shows that there is a need for research into Integrated Product and Package Design. Secondly, we have analysed three cases from industrial practice, which show that a conscious and integrated design of product and package has positive logistics effects, whereas neglecting this issue might...... result in higher costs and quality problems. On the basis of these cases we have made an initial cross-case analysis, which indicates that it is possible to develop the terminology and methodology for Integrated Product and Package Design....

A cluster-randomized controlled study to evaluate a team coaching concept for improving teamwork and patient-centeredness in rehabilitation teams.

Directory of Open Access Journals (Sweden)

Mirjam Körner

Full Text Available Although the relevance of interprofessional teamwork in the delivery of patient-centered care is well known, there is a lack of interventions for improving team interaction in the context of rehabilitation in Germany. The aim of the present study is to evaluate whether a specially developed team coaching concept (TCC could improve both teamwork and patient-centeredness.A multicenter, cluster-randomized controlled intervention study was conducted with both staff and patient questionnaires. Data was collected at ten German rehabilitation clinics (five clusters of different indication fields before (t1 and after (t2 the intervention. Intervention clinics received the TCC, while control clinics did not receive any treatment. Staff questionnaires were used to measure internal participation and other aspects of teamwork, such as team organization, while patient questionnaires assessed patient-centeredness. A multivariate analysis of variance was applied for data analysis.In order to analyze the effect of TCC on internal participation and teamwork, 305 questionnaires were included for t1 and 213 for t2 in the staff survey. In the patient survey, 523 questionnaires were included for t1 and 545 for t2. The TCC improved team organization, willingness to accept responsibility and knowledge integration according to staff, with small effect sizes (univariate: η2=.010-.017, whereas other parameters including internal participation, team leadership and cohesion did not improve due to the intervention. The patient survey did not show any improvements on the assessed dimensions.The TCC improved dimensions that were addressed directly by the approach and were linked to the clinics' needs, such as restructured team meetings and better exchange of information. The TCC can be used to improve team organization, willingness to accept responsibility, and knowledge integration in rehabilitation practice, but some further evaluation is needed to understand contextual

A cluster-randomized controlled study to evaluate a team coaching concept for improving teamwork and patient-centeredness in rehabilitation teams.

Science.gov (United States)

Körner, Mirjam; Luzay, Leonie; Plewnia, Anne; Becker, Sonja; Rundel, Manfred; Zimmermann, Linda; Müller, Christian

2017-01-01

Although the relevance of interprofessional teamwork in the delivery of patient-centered care is well known, there is a lack of interventions for improving team interaction in the context of rehabilitation in Germany. The aim of the present study is to evaluate whether a specially developed team coaching concept (TCC) could improve both teamwork and patient-centeredness. A multicenter, cluster-randomized controlled intervention study was conducted with both staff and patient questionnaires. Data was collected at ten German rehabilitation clinics (five clusters) of different indication fields before (t1) and after (t2) the intervention. Intervention clinics received the TCC, while control clinics did not receive any treatment. Staff questionnaires were used to measure internal participation and other aspects of teamwork, such as team organization, while patient questionnaires assessed patient-centeredness. A multivariate analysis of variance was applied for data analysis. In order to analyze the effect of TCC on internal participation and teamwork, 305 questionnaires were included for t1 and 213 for t2 in the staff survey. In the patient survey, 523 questionnaires were included for t1 and 545 for t2. The TCC improved team organization, willingness to accept responsibility and knowledge integration according to staff, with small effect sizes (univariate: η2=.010-.017), whereas other parameters including internal participation, team leadership and cohesion did not improve due to the intervention. The patient survey did not show any improvements on the assessed dimensions. The TCC improved dimensions that were addressed directly by the approach and were linked to the clinics' needs, such as restructured team meetings and better exchange of information. The TCC can be used to improve team organization, willingness to accept responsibility, and knowledge integration in rehabilitation practice, but some further evaluation is needed to understand contextual factors and

Developing standards for an integrated approach to workplace facilitation for interprofessional teams in health and social care contexts: a Delphi study.

Science.gov (United States)

Martin, Anne; Manley, Kim

2018-01-01

Integration of health and social care forms part of health and social care policy in many countries worldwide in response to changing health and social care needs. The World Health Organization's appeal for systems to manage the global epidemiologic transition advocates for provision of care that crosses boundaries between primary, community, hospital, and social care. However, the focus on structural and process changes has not yielded the full benefit of expected advances in care delivery. Facilitating practice in the workplace is a widely recognised cornerstone for developments in the delivery of health and social care as collaborative and inclusive relationships enable frontline staff to develop effective workplace cultures that influence whether transformational change is achieved and maintained. Workplace facilitation embraces a number of different purposes which may not independently lead to better quality of care or improved patient outcomes. Holistic workplace facilitation of learning, development, and improvement supports the integration remit across health and social care systems and avoids duplication of effort and waste of valuable resources. To date, no standards to guide the quality and effectiveness of integrated facilitation have been published. This study aimed to identify key elements constitute standards for an integrated approach to facilitating work-based learning, development, improvement, inquiry, knowledge translation, and innovation in health and social care contexts using a three rounds Delphi survey of facilitation experts from 10 countries. Consensus about priority elements was determined in the final round, following an iteration process that involved modifications to validate content. The findings helped to identify key qualities and skills facilitators need to support interprofessional teams to flourish and optimise performance. Further research could evaluate the impact of skilled integrated facilitation on health and social care

When Teams Fail to Self-Regulate: Predictors and Outcomes of Team Procrastination Among Debating Teams

Science.gov (United States)

Van Hooft, Edwin A. J.; Van Mierlo, Heleen

2018-01-01

Models of team development have indicated that teams typically engage in task delay during the first stages of the team’s life cycle. An important question is to what extent this equally applies to all teams, or whether there is variation across teams in the amount of task delay. The present study introduces the concept of team procrastination as a lens through which we can examine whether teams collectively engage in unplanned, voluntary, and irrational delay of team tasks. Based on theory and research on self-regulation, team processes, and team motivation we developed a conceptual multilevel model of predictors and outcomes of team procrastination. In a sample of 209 student debating teams, we investigated whether and why teams engage in collective procrastination as a team, and what consequences team procrastination has in terms of team member well-being and team performance. The results supported the existence of team procrastination as a team-level construct that has some stability over time. The teams’ composition in terms of individual-level trait procrastination, as well as the teams’ motivational states (i.e., team learning goal orientation, team performance-approach goal orientation in interaction with team efficacy) predicted team procrastination. Team procrastination related positively to team members’ stress levels, especially for those low on trait procrastination. Furthermore, team procrastination had an indirect negative relationship with team performance, through teams’ collective stress levels. These findings add to the theoretical understanding of self-regulatory processes of teams, and highlight the practical importance of paying attention to team-level states and processes such as team goal orientation and team procrastination. PMID:29674991

When Teams Fail to Self-Regulate: Predictors and Outcomes of Team Procrastination Among Debating Teams

Directory of Open Access Journals (Sweden)

Edwin A. J. Van Hooft

2018-04-01

Full Text Available Models of team development have indicated that teams typically engage in task delay during the first stages of the team’s life cycle. An important question is to what extent this equally applies to all teams, or whether there is variation across teams in the amount of task delay. The present study introduces the concept of team procrastination as a lens through which we can examine whether teams collectively engage in unplanned, voluntary, and irrational delay of team tasks. Based on theory and research on self-regulation, team processes, and team motivation we developed a conceptual multilevel model of predictors and outcomes of team procrastination. In a sample of 209 student debating teams, we investigated whether and why teams engage in collective procrastination as a team, and what consequences team procrastination has in terms of team member well-being and team performance. The results supported the existence of team procrastination as a team-level construct that has some stability over time. The teams’ composition in terms of individual-level trait procrastination, as well as the teams’ motivational states (i.e., team learning goal orientation, team performance-approach goal orientation in interaction with team efficacy predicted team procrastination. Team procrastination related positively to team members’ stress levels, especially for those low on trait procrastination. Furthermore, team procrastination had an indirect negative relationship with team performance, through teams’ collective stress levels. These findings add to the theoretical understanding of self-regulatory processes of teams, and highlight the practical importance of paying attention to team-level states and processes such as team goal orientation and team procrastination.

Team Learning and Team Composition in Nursing

Science.gov (United States)

Timmermans, Olaf; Van Linge, Roland; Van Petegem, Peter; Elseviers, Monique; Denekens, Joke

2011-01-01

Purpose: This study aims to explore team learning activities in nursing teams and to test the effect of team composition on team learning to extend conceptually an initial model of team learning and to examine empirically a new model of ambidextrous team learning in nursing. Design/methodology/approach: Quantitative research utilising exploratory…

The Research of Self-Management Team and Superior-Direction Team in Team Learning Influential Factors

OpenAIRE

Zhang Wei

2013-01-01

Team learning is a cure for bureaucracy; it facilitates team innovation and team performance. But team learning occurs only when necessary conditions were met. This research focused on differences of team learning influential factors between self-management team and superior-direction team. Four variables were chosen as predictors of team learning though literature review and pilot interview. The 4 variables are team motivation, team trust, team conflict and team leadership. Selected 54 self ...

A Multilevel Model of Team Cultural Diversity and Creativity: The Role of Climate for Inclusion

Science.gov (United States)

Li, Ci-Rong; Lin, Chen-Ju; Tien, Yun-Hsiang; Chen, Chien-Ming

2017-01-01

We developed a multi-level model to test how team cultural diversity may relate to team- and individual-level creativity, integrating team diversity research and information-exchange perspective. We proposed that the team climate for inclusion would moderate both the relationship between cultural diversity and team information sharing and between…

The impact of team familiarity and team leader experience on team coordination errors: A panel analysis of professional basketball teams

NARCIS (Netherlands)

Sieweke, Jost; Zhao, B.

2015-01-01

To explore the dynamics involved in team coordination, we examine the impact of team familiarity and team leader experience on team coordination errors (TCEs). We argue that team familiarity has a U-shaped effect on TCEs. We study the moderating effects of team leader prior experience and team

The interprofessional team as a small group.

Science.gov (United States)

Kane, R A

1975-01-01

Conflicts in interprofessional teamwork may be as much explained by group process considerations as by the interaction of professional roles and statuses. This paper examines the interprofessional team as a small group, using a synthesis of sources from social psychology, social group work, T-group literature, management theory, and health team research. Eight issues are considered in relation to the team as a small group, namely, (a) the individual in the group, (b) team size, (c) group norms, (d) democracy, (e) decision making and conflict resolution, (f) communication and structure, (g) leadership, and (h) group harmony and its relationship to group productivity.

An integrated production, inventory and preventive maintenance model for a multi-product production system

International Nuclear Information System (INIS)

Liu, Xuejuan; Wang, Wenbin; Peng, Rui

2015-01-01

This paper considers a production system that can produce multiple products alternately. Products go through the system in a sequence and a complete run of all products forms a production cycle. An integrated production, inventory and preventive maintenance model is constructed, which is characterized by the delay-time concept. Two different situations are studied based on whether the unqualified products and downtime caused by the failures of the system, set-up and preventive maintenance can be ignored or not. Three cases are considered for each situation, depending on the position of the preventive maintenance epochs: the first case, where preventive maintenance is carried out at the end of each production cycle; the second case, where preventive maintenance is carried out at each set-up time of the products; and the third case, where preventive maintenance is carried out at some set-up times only, since it may not always be optimal to carry out preventive maintenance at the end of the production cycle or at each set-up time. The modeling objectives are to find the optimal number of production cycles per year and the optimal position of preventive maintenance that will maximize the expected profit per unit time. Numerical examples, using real data, are presented to illustrate the model. - Highlights: • We propose an integrated economic production quantity and preventive maintenance model. • The situation that multiple products are produced on the same system alternately is studied. • Two situations are studied based on whether the downtime and the product quality can be ignored or not. • We use enumeration method and analytical method to select the optimal preventive maintenance policy, respectively. • We use the delay-time concept to model the preventive maintenance policy

Pharmacy students' attitudes towards physician-pharmacist collaboration: Intervention effect of integrating cooperative learning into an interprofessional team-based community service.

Science.gov (United States)

Wang, Jun; Hu, Xiamin; Liu, Juan; Li, Lei

2016-09-01

The aim of this study was to evaluate the attitudes towards physician-pharmacist collaboration among pharmacy students in order to develop an interprofessional education (IPE) opportunity through integrating cooperative learning (CL) into a team-based student-supported community service event. The study also aimed to assess the change in students' attitudes towards interprofessional collaboration after participation in the event. A bilingual version of the Scale of Attitudes Toward Physician-Pharmacist Collaboration (SATP(2)C) in English and Chinese was completed by pharmacy students enrolled in Wuhan University of Science and Technology, China. Sixty-four students (32 pharmacy students and 32 medical students) in the third year of their degree volunteered to participate in the IPE opportunity for community-based diabetes and hypertension self-management education. We found the mean score of SATP(2)C among 235 Chinese pharmacy students was 51.44. Cronbach's alpha coefficient was 0.90. Our key finding was a significant increase in positive attitudes towards interprofessional collaboration after participation in the IPE activity. These data suggest that there is an opportunity to deliver IPE in Chinese pharmacy education. It appears that the integration of CL into an interprofessional team-based community service offers a useful approach for IPE.

The challenge of executive team building in the aftermath of a hostile takeover

International Nuclear Information System (INIS)

Scott, R. G.

1997-01-01

In a hostile takeover, the executives of the acquired company are likely to have strong feelings that they may be unwanted by and considered disloyal to the the new company. They are likely to be filled with a sense that the 'new company' will 'get even with them' for the resistance put up to the merger. Therefore, the new company must be conscious of and sensitive to the fact that a strained environment exists and one of its first priorities should be to reduce that strain. Experience shows that a well informed Transition Team can minimize the emotional impacts of a hostile takeover and contribute significantly to the eventual success of the merger. To assure success, the Transition Team should be appointed early in the negotiating phase. It should have ready access to the negotiating team and the CEO to keep them fully informed of risk management issues caused by human resource. It should be involved in the strategic planning process during the pre-merger stage. It should have major responsibility for developing human resource impact studies, the development of organizational structure, the integration and implementation planning and monitoring of the progress of implementation. A list of Transition Team responsibilities and a list of proven techniques for turning a hostile environment into a productive win/win team environment are also included

Community nurses working in piloted primary care teams: Irish Republic.

LENUS (Irish Health Repository)

Burke, Triona

2010-08-01

Primary care health services in the Irish Republic have undergone fundamental transformation with the establishment of multidisciplinary primary care teams nationwide. Primary care teams provide a community-based health service delivered through a range of health professionals in an integrated way. As part of this initiative ten pilot teams were established in 2003. This research was undertaken in order to gain an understanding of nurse\\'s experiences of working in a piloted primary care team. The methodology used was a focus group approach. The findings from this study illustrated how community nurse\\'s roles and responsibilities have expanded within the team. The findings also highlighted the benefits and challenges of working as a team with various other community-based health-care disciplines.

DOE handbook: Integrated safety management systems (ISMS) verification. Team leader's handbook

International Nuclear Information System (INIS)

1999-06-01

The primary purpose of this handbook is to provide guidance to the ISMS verification Team Leader and the verification team in conducting ISMS verifications. The handbook describes methods and approaches for the review of the ISMS documentation (Phase I) and ISMS implementation (Phase II) and provides information useful to the Team Leader in preparing the review plan, selecting and training the team, coordinating the conduct of the verification, and documenting the results. The process and techniques described are based on the results of several pilot ISMS verifications that have been conducted across the DOE complex. A secondary purpose of this handbook is to provide information useful in developing DOE personnel to conduct these reviews. Specifically, this handbook describes methods and approaches to: (1) Develop the scope of the Phase 1 and Phase 2 review processes to be consistent with the history, hazards, and complexity of the site, facility, or activity; (2) Develop procedures for the conduct of the Phase 1 review, validating that the ISMS documentation satisfies the DEAR clause as amplified in DOE Policies 450.4, 450.5, 450.6 and associated guidance and that DOE can effectively execute responsibilities as described in the Functions, Responsibilities, and Authorities Manual (FRAM); (3) Develop procedures for the conduct of the Phase 2 review, validating that the description approved by the Approval Authority, following or concurrent with the Phase 1 review, has been implemented; and (4) Describe a methodology by which the DOE ISMS verification teams will be advised, trained, and/or mentored to conduct subsequent ISMS verifications. The handbook provides proven methods and approaches for verifying that commitments related to the DEAR, the FRAM, and associated amplifying guidance are in place and implemented in nuclear and high risk facilities. This handbook also contains useful guidance to line managers when preparing for a review of ISMS for radiological

Overview of design issues in product-integrated Photovoltaics

NARCIS (Netherlands)

Apostolou, G.; Reinders, Angelina H.M.E.

2014-01-01

This paper presents an overview of the design features and characteristics of photovoltaic (PV)-powered products based on a literature study on product-integrated PV and an analysis of 90 PV-powered products executed during 2011–2013. The aim of this paper is to provide insight into the current

Team responsibility structure and team performance

NARCIS (Netherlands)

Doorewaard, J.A.C.M.; Hootegem, G. van; Huys, R.

2002-01-01

The purpose is to analyse the impact of team responsibility (the division of job regulation tasks between team leader and team members) on team performance. It bases an analysis on 36 case studies in The Netherlands which are known to have implemented team‐based work. The case studies were executed

Zero to Integration in Eight Months, the Dawn Ground Data System Engineering Challange

Science.gov (United States)

Dubon, Lydia P.

2006-01-01

The Dawn Project has presented the Ground Data System (GDS) with technical challenges driven by cost and schedule constraints commonly associated with National Aeronautics and Space Administration (NASA) Discovery Projects. The Dawn mission consists of a new and exciting Deep Space partnership among: the Jet Propulsion Laboratory (JPL), responsible for project management and flight operations; Orbital Sciences Corporation (OSC), spacecraft builder and responsible for flight system test and integration; and the University of California, at Los Angeles (UCLA), responsible for science planning and operations. As a cost-capped mission, one of Dawn s implementation strategies is to leverage from both flight and ground heritage. OSC's ground data system is used for flight system test and integration as part of the flight heritage strategy. Mission operations, however, are to be conducted with JPL s ground system. The system engineering challenge of dealing with two heterogeneous ground systems emerged immediately. During the first technical interchange meeting between the JPL s GDS Team and OSC's Flight Software Team, August 2003, the need to integrate the ground system with the flight software was brought to the table. This need was driven by the project s commitment to enable instrument engineering model integration in a spacecraft simulator environment, for both demonstration and risk mitigation purposes, by April 2004. This paper will describe the system engineering approach that was undertaken by JPL's GDS Team in order to meet the technical challenge within a non-negotiable eight-month schedule. Key to the success was adherence to an overall systems engineering process and fundamental systems engineering practices: decomposition of the project request into manageable requirements; definition of a structured yet flexible development process; integration of multiple ground disciplines and experts into a focused team effort; in-process risk management; and aggregation

New Approaches to Aluminum Integral Foam Production with Casting Methods

Directory of Open Access Journals (Sweden)

Ahmet Güner

2015-08-01

Full Text Available Integral foam has been used in the production of polymer materials for a long time. Metal integral foam casting systems are obtained by transferring and adapting polymer injection technology. Metal integral foam produced by casting has a solid skin at the surface and a foam core. Producing near-net shape reduces production expenses. Insurance companies nowadays want the automotive industry to use metallic foam parts because of their higher impact energy absorption properties. In this paper, manufacturing processes of aluminum integral foam with casting methods will be discussed.

Team cohesion and team success in sport.

Science.gov (United States)

Carron, Albert V; Bray, Steven R; Eys, Mark A

2002-02-01

The main aim of this study was to examine the relationship between task cohesiveness and team success in elite teams using composite team estimates of cohesion. A secondary aim was to determine statistically the consistency (i.e. 'groupness') present in team members' perceptions of cohesion. Elite university basketball teams (n = 18) and club soccer teams (n = 9) were assessed for cohesiveness and winning percentages. Measures were recorded towards the end of each team's competitive season. Our results indicate that cohesiveness is a shared perception, thereby providing statistical support for the use of composite team scores. Further analyses indicated a strong relationship between cohesion and success (r = 0.55-0.67). Further research using multi-level statistical techniques is recommended.

Sustainability of cross-functional teams for marketing strategy development and implementation.

Science.gov (United States)

Kono, Ken; Antonucci, Don

2006-01-01

This article presents a case study on a cross-functional team used for marketing strategy development and execution at a health insurance company. The study found a set of success factors that contributed to the initial success of the team, but the factors were not enough to maintain the team's high level of productivity over time. The study later identified a set of 8 factors that helped sustain the team's high-productivity level. The 2 sets (ie, success and its subsequent sustainability factors) are analyzed against a normative model of team effectiveness. All the factors are explained by the normative model except for 1 sustainability factor, "challenge motivator." In fact, the study found the "challenge motivator" to be the most critical factor to keep up the team's productivity over time. Apart from a performance crisis, the authors developed 3 "challenge motivators"--first, more granular market information that could unearth hidden performance issues; second, constant value creation to shareholders as the firm being publicly traded; and third, the firm's strategic mandate to meet and exceed customer expectations that puts ultimate performance pressure on the marketing strategy team.

BiodieselFAO: An Integrated Decision Support System for Investment Analysis in the Biodiesel Production Chain

Directory of Open Access Journals (Sweden)

Aziz Galvão da Silva Júnior

2015-06-01

Full Text Available In the short and medium terms, biofuels are the most viable alternative to reduce the environmental impact of fossil fuels. The recent controversy over the competition between biofuels and food production increases the complexity of investment decisions in the biodiesel production chain. In this context, decision support tools are highly relevant. The purpose of this article is to describe the BiodieselFAO using the Unified Modeling Language (UML. An integrated analysis considering both agricultural and industrial sectors was identified as a key requirement to the system. Therefore, farmers and industry are the main actors in the use case diagram. As the raw material represents around 70% of the industrial cost of biodiesel production, the price negotiation of raw material (oilseeds is the central use case. Configuration, agriculture, industry, results and scenarios are the modules, which encompass the functionalities derived from the UML diagrams. The Food and Agriculture Organization of the United Nations (FAO has made the BiodieselFAO available, free of charge, to around 180 professionals from 17 Latin American countries. Additionally, the developing team has supported the usage of the BiodieselFAO in several biodiesel investment analyses throughout Latin America. The system was also useful in the design and analysis of policy related to biodiesel industry in Brazil.

System studies on Biofuel production via Integrated Biomass Gasification

Energy Technology Data Exchange (ETDEWEB)

Andersson, Jim; Lundgren, Joakim [Luleaa Univ. of Technology Bio4Energy, Luleaa (Sweden); Malek, Laura; Hulteberg, Christian [Lund Univ., Lund (Sweden); Pettersson, Karin [Chalmers Univ. of Technology, Goeteborg (Sweden); Wetterlund, Elisabeth [Linkoeping Univ. Linkoeping (Sweden)

2013-09-01

A large number of national and international techno-economic studies on industrially integrated gasifiers for production of biofuels have been published during the recent years. These studies comprise different types of gasifiers (fluidized bed, indirect and entrained flow) integrated in different industries for the production of various types of chemicals and transportation fuels (SNG, FT-products, methanol, DME etc.) The results are often used for techno-economic comparisons between different biorefinery concepts. One relatively common observation is that even if the applied technology and the produced biofuel are the same, the results of the techno-economic studies may differ significantly. The main objective of this project has been to perform a comprehensive review of publications regarding industrially integrated biomass gasifiers for motor fuel production. The purposes have been to identify and highlight the main reasons why similar studies differ considerably and to prepare a basis for fair techno-economic comparisons. Another objective has been to identify possible lack of industrial integration studies that may be of interest to carry out in a second phase of the project. Around 40 national and international reports and articles have been analysed and reviewed. The majority of the studies concern gasifiers installed in chemical pulp and paper mills where black liquor gasification is the dominating technology. District heating systems are also well represented. Only a few studies have been found with mechanical pulp and paper mills, steel industries and the oil refineries as case basis. Other industries have rarely, or not at all, been considered for industrial integration studies. Surprisingly, no studies regarding integration of biomass gasification neither in saw mills nor in wood pellet production industry have been found. In the published economic evaluations, it has been found that there is a large number of studies containing both integration and

Minilivestock in Argentina. Integration with Agricultural Production

Directory of Open Access Journals (Sweden)

Biasatti, NR.

1999-01-01

Full Text Available The development of alternative agricultural production can take different forms. In Argentina there is an important diversity of species available to be incorporated into production systems, giving support for the use of natural resources based on taking advantage of the regional fauna. Moreover the use of different animal species can be incorporated under the concept of the optimization of flows of energy and materials, tending to minimize the environmental impact of livestock production, and also to make more efficient use of the ingredients required for developing the activity. The integration of non-traditional species (minilivestock within the context of sustainable agricultural development was the motivation for the present study A module for raising Myocastor coypus (coypu or false nutha was developed, to which was linked a module for raising Eisenia foetida (the socalled red worm, in both cases with a dual purpose. Preliminary estimates were made of the productive aspects of both species, as well as an analysis of their integration, to understand the extent to which diversification linked with complementation tends to optimize the system.

How teams use indicators for quality improvement - a multiple-case study on the use of multiple indicators in multidisciplinary breast cancer teams.

Science.gov (United States)

Gort, Marjan; Broekhuis, Manda; Regts, Gerdien

2013-11-01

A crucial issue in healthcare is how multidisciplinary teams can use indicators for quality improvement. Such teams have increasingly become the core component in both care delivery and in many quality improvement methods. This study aims to investigate the relationships between (1) team factors and the way multidisciplinary teams use indicators for quality improvement, and (2) both team and process factors and the intended results. An in-depth, multiple-case study was conducted in the Netherlands in 2008 involving four breast cancer teams using six structure, process and outcome indicators. The results indicated that the process of using indicators involves several stages and activities. Two teams applied a more intensive, active and interactive approach as they passed through these stages. These teams were perceived to have achieved good results through indicator use compared to the other two teams who applied a simple control approach. All teams experienced some difficulty in integrating the new formal control structure, i.e. measuring and managing performance, in their operational task, and in using their 'new' managerial task to decide as a team what and how to improve. Our findings indicate the presence of a network of relationships between team factors, the controllability and actionability of indicators, the indicator-use process, and the intended results. Copyright © 2013. Published by Elsevier Ltd.

Psychological Safety and Norm Clarity in Software Engineering Teams

OpenAIRE

Lenberg, Per; Feldt, Robert

2018-01-01

In the software engineering industry today, companies primarily conduct their work in teams. To increase organizational productivity, it is thus crucial to know the factors that affect team effectiveness. Two team-related concepts that have gained prominence lately are psychological safety and team norms. Still, few studies exist that explore these in a software engineering context. Therefore, with the aim of extending the knowledge of these concepts, we examined if psychological safety and t...

Forming a new clinical team for frail older people: can a group development model help?

Science.gov (United States)

Anderson, Elizabeth Susan; Pollard, Lorraine; Conroy, Simon; Clague-Baker, Nicola

2014-03-01

Integrated services which utilise the expertise of team members along care pathways are evolving. Changes in service structure and subsequent team working arrangements can be a challenge for practitioners expected to redefine how they work with one another. These services are particularly important for the care of frail older people. This exploratory study of one newly forming team presents the views of staff involved in establishing an interprofessional healthcare advisory team for older people within an acute hospital admissions unit. Staff experiences of forming a new service are aligned to a model of team development. The findings are presented as themes relating to the stages of team development and identify the challenges of setting up an integrated service alongside existing services. In particular, team process issues relating to the clarity of goals, role clarification, leadership, team culture and identity. Managers must allow time to ensure new services evolve before setting up evaluation studies for efficiency and effectiveness which might prove against the potential for interprofessional teamworking.

A patient-centred team-coaching concept for medical rehabilitation.

Science.gov (United States)

Körner, M; Becker, S; Dinius, J; Müller, C; Zimmermann, L; Rundel, M

2018-01-01

Team coaching enhances teamwork and subsequently improves patient-centredness in medical rehabilitation clinics. Even though interprofessional teamwork is regarded as a crucial factor in medical rehabilitation, to date no evaluated team-coaching approaches are available for improving interprofessional teamwork in medical rehabilitation in Germany. Based on a systematic literature search and interviews with staff, managers, and patients of rehabilitation clinics, we developed a team-coaching approach that is standardized in its process but based on the individual needs and requests of each clinic. It takes a systemic perspective and is goal-oriented and solution-focused. The approach mainly serves to provide impulses to make use of resources within the team and to support a self-directed organisational learning process. It is manualized and can, therefore, be used by professionals aiming to improve interprofessional teamwork in their clinic. A multi-centre, cluster-randomized controlled study that was conducted to evaluate the team-coaching approach showed positive results. Team organization, knowledge integration, and responsibility can be improved, and, therefore, the implementation of the patient-centred team-coaching approach in interprofessional rehabilitation teams can be recommended.

Understanding palliative care on the heart failure care team: an innovative research methodology.

Science.gov (United States)

Lingard, Lorelei A; McDougall, Allan; Schulz, Valerie; Shadd, Joshua; Marshall, Denise; Strachan, Patricia H; Tait, Glendon R; Arnold, J Malcolm; Kimel, Gil

2013-05-01

There is a growing call to integrate palliative care for patients with advanced heart failure (HF). However, the knowledge to inform integration efforts comes largely from interview and survey research with individual patients and providers. This work has been critically important in raising awareness of the need for integration, but it is insufficient to inform solutions that must be enacted not by isolated individuals but by complex care teams. Research methods are urgently required to support systematic exploration of the experiences of patients with HF, family caregivers, and health care providers as they interact as a care team. To design a research methodology that can support systematic exploration of the experiences of patients with HF, caregivers, and health care providers as they interact as a care team. This article describes in detail a methodology that we have piloted and are currently using in a multisite study of HF care teams. We describe three aspects of the methodology: the theoretical framework, an innovative sampling strategy, and an iterative system of data collection and analysis that incorporates four data sources and four analytical steps. We anticipate that this innovative methodology will support groundbreaking research in both HF care and other team settings in which palliative integration efforts are emerging for patients with advanced nonmalignant disease. Copyright © 2013 U.S. Cancer Pain Relief Committee. Published by Elsevier Inc. All rights reserved.

Systems innovation model: an integrated interdisciplinary team approach pre- and post-bariatric surgery at a veterans affairs (VA) medical center.

Science.gov (United States)

Eisenberg, Dan; Lohnberg, Jessica A; Kubat, Eric P; Bates, Cheryl C; Greenberg, Lauren M; Frayne, Susan M

2017-04-01

Provision of bariatric surgery in the Veterans Health Administration must account for obese veterans' co-morbidity burden and the geographically dispersed location of patients relative to Veterans Affairs (VA) bariatric centers. To evaluate a collaborative, integrated, interdisciplinary bariatric team of surgeons, bariatricians, psychologists, dieticians, and physical therapists working in a hub-and-spokes care model, for pre- and post-bariatric surgery assessment and management. This is a description of an interdisciplinary clinic and bariatric program at a VA healthcare system and a report on program evaluation findings. Retrospective data of a prospective database was abstracted. For program evaluation, we abstracted charts to characterize patient data and conducted a patient survey. Since 2009, 181 veterans have undergone bariatric surgery. Referrals came from 7 western U.S. states. Mean preoperative body mass index was 46 kg/m 2 (maximum 71). Mean age was 53 years, with 33% aged>60 years; 79% were male. Medical co-morbidity included diabetes (70%), hypertension (85%), and lower back or extremity joint pain (84%). A psychiatric diagnosis was present in 58%. At 12 months, follow-up was 81% and percent excess body mass index loss was 50.5%. Among 54 sequential clinic patients completing anonymous surveys, overall satisfaction with the interdisciplinary team approach and improved quality of life were high (98% and 94%, respectively). The integrated, interdisciplinary team approach using a hub-and-spokes model is well suited to the VA bariatric surgery population, with its heavy burden of medical and mental health co-morbidity and its system of geographically dispersed patients receiving treatment at specialty centers. As the VA seeks to expand the use of bariatric surgery as an option for obese veterans, interdisciplinary models crafted to address case complexity, care coordination, and long-term outcomes should be part of policy planning efforts. Published by

Product architecture development enabling integrated re-design of mechanical products

NARCIS (Netherlands)

Begelinger, R.E.; Post, E.; van Houten, F.J.A.M.; Kals, H.J.J.

1999-01-01

Global competition forces companies to increase their competitive advantage. The design process represents an interesting area to improve the overall business performance. There are two topics involved in improving the design process. The first one is the integration of constraints from the product

University of Maine Integrated Forest Product Refinery (IFPR) Technology Research

Energy Technology Data Exchange (ETDEWEB)

Pendse, Hemant P.

2010-11-23

This project supported research on science and technology that forms a basis for integrated forest product refinery for co-production of chemicals, fuels and materials using existing forest products industry infrastructure. Clear systems view of an Integrated Forest Product Refinery (IFPR) allowed development of a compelling business case for a small scale technology demonstration in Old Town ME for co-production of biofuels using cellulosic sugars along with pulp for the new owners of the facility resulting in an active project on Integrated Bio-Refinery (IBR) at the Old Town Fuel & Fiber. Work on production of advanced materials from woody biomass has led to active projects in bioplastics and carbon nanofibers. A lease for 40,000 sq. ft. high-bay space has been obtained to establish a Technology Research Center for IFPR technology validation on industrially relevant scale. UMaine forest bioproducts research initiative that began in April 2006 has led to establishment of a formal research institute beginning in March 2010.

Improving Care Teams' Functioning: Recommendations from Team Science.

Science.gov (United States)

Fiscella, Kevin; Mauksch, Larry; Bodenheimer, Thomas; Salas, Eduardo

2017-07-01

Team science has been applied to many sectors including health care. Yet there has been relatively little attention paid to the application of team science to developing and sustaining primary care teams. Application of team science to primary care requires adaptation of core team elements to different types of primary care teams. Six elements of teams are particularly relevant to primary care: practice conditions that support or hinder effective teamwork; team cognition, including shared understanding of team goals, roles, and how members will work together as a team; leadership and coaching, including mutual feedback among members that promotes teamwork and moves the team closer to achieving its goals; cooperation supported by an emotionally safe climate that supports expression and resolution of conflict and builds team trust and cohesion; coordination, including adoption of processes that optimize efficient performance of interdependent activities among team members; and communication, particularly regular, recursive team cycles involving planning, action, and debriefing. These six core elements are adapted to three prototypical primary care teams: teamlets, health coaching, and complex care coordination. Implementation of effective team-based models in primary care requires adaptation of core team science elements coupled with relevant, practical training and organizational support, including adequate time to train, plan, and debrief. Training should be based on assessment of needs and tasks and the use of simulations and feedback, and it should extend to live action. Teamlets represent a potential launch point for team development and diffusion of teamwork principles within primary care practices. Copyright © 2017 The Joint Commission. Published by Elsevier Inc. All rights reserved.

Building an Undergraduate STEM Team Using Team-Based Learning Leading to the Production of a Storyboard Appropriate for Elementary Students

Science.gov (United States)

Cutright, Teresa J.; Evans, Edward; Brantner, Justin S.

2014-01-01

A unique undergraduate team that spans five different engineering disciplines, chemistry, biology, and mathematics was formed. The team was formed to promote cross-disciplinary learning, to improve retention, and to prepare the students for the kind of problems they will face in their careers. This paper describes the variety of activities used…

Knowledge workers and knowledge-intense organizations, Part 2: Designing and managing for productivity.

Science.gov (United States)

Weaver, D; Sorrells-Jones, J

1999-09-01

Our economy is shifting from a hard goods and material products base to one in which knowledge is the primary mode of production. Organizations are experimenting with designs that support knowledge work by clustering individuals with different but complementary skills in focused teams. The goal is to increase applied knowledge that furthers the organization's strategic intent. The team-based knowledge work model holds promise for healthcare organizations that are under pressure to use knowledge to improve clinical care, integrate care across disciplines and settings, and accept accountability for costs. However, the shift from the traditional bureaucratic model to the flexible team-based design mandates changes in the design of the organization, the role of leadership, and the attributes of the teams and team members. In Part 2 of this three-part series, the authors explore the necessary design changes and the new roles for leadership, teams, and their members. Additionally, implications for healthcare clinicians, particularly nurses, are discussed.

Relationships among Team Trust, Team Cohesion, Team Satisfaction and Project Team Effectiveness as Perceived by Project Managers in Malaysia

OpenAIRE

Han-Ping Fung

2014-01-01

Today, more and more project teams are formed to achieve organizational objectives as organizations generally recognized the importance and benefits of project teams. There is a compelling reason to study what are the team outcome factors that can predict project team effectiveness as it is unclear whether these team outcome factors can yield the same result in project setting whereby there is resource and time constraint compare to normal work teams which are ongoing and operational in natur...

Integrating Molecular Computation and Material Production in an Artificial Subcellular Matrix

DEFF Research Database (Denmark)

Fellermann, Harold; Hadorn, Maik; Bönzli, Eva

Living systems are unique in that they integrate molecular recognition and information processing with material production on the molecular scale. Pre- dominant locus of this integration is the cellular matrix, where a multitude of biochemical reactions proceed simultaneously in highly compartmen......Living systems are unique in that they integrate molecular recognition and information processing with material production on the molecular scale. Pre- dominant locus of this integration is the cellular matrix, where a multitude of biochemical reactions proceed simultaneously in highly...... compartmentalized re- action compartments that interact and get delivered through vesicle trafficking. The European Commission funded project MatchIT (Matrix for Chemical IT) aims at creating an artificial cellular matrix that seamlessly integrates infor- mation processing and material production in much the same...

Multi-User GeoGebra for Virtual Math Teams

Directory of Open Access Journals (Sweden)

Gerry Stahl

2010-05-01

Full Text Available The Math Forum is an online resource center for pre-algebra, algebra, geometry and pre-calculus. Its Virtual Math Teams (VMT service provides an integrated web-based environment for small teams to discuss mathematics. The VMT collaboration environment now includes the dynamic mathematics application, GeoGebra. It offers a multi-user version of GeoGebra, which can be used in concert with VMT’s chat, web browsers, curricula and wiki repository.

Enhancing technology acceptance: The role of the subsurface contaminants focus area external integration team

International Nuclear Information System (INIS)

Kirwan-Taylor, H.; McCabe, G.H.; Lesperance, A.; Kauffman, J.; Serie, P.; Dressen, L.

1996-09-01

The US DOE is developing and deploying innovative technologies for cleaning up its contaminated facilities using a market-oriented approach. This report describes the activities of the Subsurface Contaminant Focus Area's (SCFA) External Integration Team (EIT) in supporting DOE's technology development program. The SCFA program for technology development is market-oriented, driven by the needs of end users. The purpose of EIT is to understand the technology needs of the DOE sites and identify technology acceptance criteria from users and other stakeholders to enhance deployment of innovative technologies. Stakeholders include regulators, technology users, Native Americans, and environmental and other interest groups. The success of this national program requires close coordination and communication among technology developers and stakeholders to work through all of the various phases of planning and implementation. Staff involved must be willing to commit significant amounts of time to extended discussions with the various stakeholders

Enhancing technology acceptance: The role of the subsurface contaminants focus area external integration team

Energy Technology Data Exchange (ETDEWEB)

Kirwan-Taylor, H.; McCabe, G.H. [Battelle Seattle Research Center, WA (United States); Lesperance, A. [Pacific Northwest National Lab., Richland, WA (United States); Kauffman, J.; Serie, P.; Dressen, L. [EnvironIssues (United States)

1996-09-01

The US DOE is developing and deploying innovative technologies for cleaning up its contaminated facilities using a market-oriented approach. This report describes the activities of the Subsurface Contaminant Focus Area`s (SCFA) External Integration Team (EIT) in supporting DOE`s technology development program. The SCFA program for technology development is market-oriented, driven by the needs of end users. The purpose of EIT is to understand the technology needs of the DOE sites and identify technology acceptance criteria from users and other stakeholders to enhance deployment of innovative technologies. Stakeholders include regulators, technology users, Native Americans, and environmental and other interest groups. The success of this national program requires close coordination and communication among technology developers and stakeholders to work through all of the various phases of planning and implementation. Staff involved must be willing to commit significant amounts of time to extended discussions with the various stakeholders.

Improving occupational safety and health by integration into product development

DEFF Research Database (Denmark)

Broberg, Ole

1996-01-01

A cross-sectional case study was performed in a large company producing electro-mechanical products for industrial application. The objectives were: (i) to study the product development process and the role of key actors', (ii) to identify current practice on integrating occupational safety and h...... and studies of documents. A questionnaire regarding product development tasks and occupational safety and health were distributed to 30 design and production engineers. A total of 27 completed the questionnaire corresponding to a response rate of 90 per cent.......A cross-sectional case study was performed in a large company producing electro-mechanical products for industrial application. The objectives were: (i) to study the product development process and the role of key actors', (ii) to identify current practice on integrating occupational safety...... and health into the development process, especially the efforts and attitudes of design and production engineers', and (iii) to identify key actors'reflections on how to improve this integration. The study was based on qualitative as well as quantitative methods including interviews, questionnaires...

Dynamics of Research Team Formation in Complex Networks

Science.gov (United States)

Sun, Caihong; Wan, Yuzi; Chen, Yu

Most organizations encourage the formation of teams to accomplish complicated tasks, and vice verse, effective teams could bring lots benefits and profits for organizations. Network structure plays an important role in forming teams. In this paper, we specifically study the dynamics of team formation in large research communities in which knowledge of individuals plays an important role on team performance and individual utility. An agent-based model is proposed, in which heterogeneous agents from research communities are described and empirically tested. Each agent has a knowledge endowment and a preference for both income and leisure. Agents provide a variable input (‘effort’) and their knowledge endowments to production. They could learn from others in their team and those who are not in their team but have private connections in community to adjust their own knowledge endowment. They are allowed to join other teams or work alone when it is welfare maximizing to do so. Various simulation experiments are conducted to examine the impacts of network topology, knowledge diffusion among community network, and team output sharing mechanisms on the dynamics of team formation.

Wabash River Integrated Methanol and Power Production from Clean Coal Technologies (IMPPCCT)

Energy Technology Data Exchange (ETDEWEB)

Conocophillips

2007-09-30

The Wabash River Integrated Methanol and Power Production from Clean Coal Technologies (IMPPCCT) project was established to evaluate integrated electrical power generation and methanol production through clean coal technologies. The project was under the leadership of ConocoPhillips Company (COP), after it acquired Gasification Engineering Corporation (GEC) and the E-Gas gasification technology from Global Energy Inc. in July 2003. The project has completed both Phase 1 and Phase 2 of development. The two project phases include the following: (1) Feasibility study and conceptual design for an integrated demonstration facility at SG Solutions LLC (SGS), previously the Wabash River Energy Limited, Gasification Facility located in West Terre Haute, Indiana, and for a fence-line commercial embodiment plant (CEP) operated at the Dow Chemical Company or Dow Corning Corporation chemical plant locations. (2) Research, development, and testing (RD&T) to define any technology gaps or critical design and integration issues. Phase 1 of this project was supported by a multi-industry team consisting of Air Products and Chemicals, Inc., The Dow Chemical Company, Dow Corning Corporation, Methanex Corporation, and Siemens Westinghouse Power Corporation, while Phase 2 was supported by Gas Technology Institute, TDA Research Inc., and Nucon International, Inc. The SGS integrated gasification combined cycle (IGCC) facility was designed, constructed, and operated under a project selected and co-funded under the Round IV of the United States Department of Energy's (DOE's) Clean Coal Technology Program. In this project, coal and/or other carbonaceous fuel feedstocks are gasified in an oxygen-blown, entrained-flow gasifier with continuous slag removal and a dry particulate removal system. The resulting product synthesis gas (syngas) is used to fuel a combustion turbine generator whose exhaust is integrated with a heat recovery steam generator to drive a refurbished steam turbine

Technical Integration of Nuclear Hydrogen Production Technology

International Nuclear Information System (INIS)

Lee, Ki Young; Chang, J. H.; Park, J. K.

2007-06-01

These works focus on the development of attainment indices for nuclear hydrogen key technologies, the analysis of the hydrogen production process and the performance estimation for hydrogen production system, and the assessment of the nuclear hydrogen production economy. To estimate the attainments of the key technologies in progress with the performance goals of GIF, itemized are the attainment indices based on SRP published in VHTR R and D steering committee of Gen-IV. For assessing the degree of attainments in comparison with the final goals of VHTR technologies in progress of researches, subdivided are the prerequisite items conformed to the NHDD concepts established in a preconceptual design in 2005. The codes for analyzing the hydrogen production economy are developed for calculating the unit production cost of nuclear hydrogen. We developed basic R and D quality management methodology to meet design technology of VHTR's needs. By putting it in practice, we derived some problems and solutions. We distributed R and D QAP and Q and D QAM to each teams and these are in operation. Computer simulations are performed for estimating the thermal efficiency for the electrodialysis component likely to adapting as one of the hydrogen production system in Korea and EED-SI process known as the key components of the hydrogen production systems. Using the commercial codes, the process diagrams and the spread-sheets were produced for the Bunsen reaction process, Sulphuric Acid dissolution process and HI dissolution process, respectively, which are the key components composing of the SI process

Making Teamwork Work: Team Knowledge for Team Effectiveness.

Science.gov (United States)

Guchait, Priyanko; Lei, Puiwa; Tews, Michael J

2016-01-01

This study examined the impact of two types of team knowledge on team effectiveness. The study assessed the impact of taskwork knowledge and teamwork knowledge on team satisfaction and performance. A longitudinal study was conducted with 27 service-management teams involving 178 students in a real-life restaurant setting. Teamwork knowledge was found to impact both team outcomes. Furthermore, team learning behavior was found to mediate the relationships between teamwork knowledge and team outcomes. Educators and managers should therefore ensure these types of knowledge are developed in teams along with learning behavior for maximum effectiveness.

Managing projects a team-based approach

CERN Document Server

Brown, Karen A

2010-01-01

Students today are likely to be assigned to project teams or to be project managers almost immediately in their first job. Managing Projects: A Team-Based Approach was written for a wide range of stakeholders, including project managers, project team members, support personnel, functional mangers who provide resources for projects, project customers (and customer representatives), project sponsors, project subcontractors, and anyone who plays a role in the project delivery process. The need for project management is on the rise as product life cycles compress, demand for IT systems increases, and business takes on an increasingly global character. This book adds to the project management knowledge base in a way that fills an unmet need—it shows how teams can apply many of the standard project management tools, as well as several tools that are relatively new to the field. Managing Projects: A Team-Based Approach offers the academic rigor found in most textbooks along with the practical attributes often foun...

Cognitive Style Diversity in Decision Making Teams: A Conceptual Framework

Directory of Open Access Journals (Sweden)

Abby Mello

2014-04-01

Full Text Available Team diversity scholars have called for examining cognitive variables (van Knippenberg & Schippers, 2007, such as cognitive style, in team dissimilarity research. However, due to the dearth of research on cognitive style diversity in teams, heeding these calls requires new theory. Therefore, we extended recent theoretical developments that suggested indirect relationships between diversity and performance by orienting cognitive style within the team diversity literature and by proposing cognitive style diversity’s effects on team processes in decision making teams. We also integrated the moderating role of team member perspective taking into the framework. We presented arguments and propositions for the combined effects of cognitive style diversity and perspective taking on task conflict, affective conflict, and the development of schema congruence. We offer suggestions for testing the proposed relationships in future research regarding variable measurement and multi-level data. Implications for and contributions to practice are also addressed.

The use of artificial intelligence techniques to improve the multiple payload integration process

Science.gov (United States)

Cutts, Dannie E.; Widgren, Brian K.

1992-01-01

A maximum return of science and products with a minimum expenditure of time and resources is a major goal of mission payload integration. A critical component then, in successful mission payload integration is the acquisition and analysis of experiment requirements from the principal investigator and payload element developer teams. One effort to use artificial intelligence techniques to improve the acquisition and analysis of experiment requirements within the payload integration process is described.

Variables associated with work performance in multidisciplinary mental health teams.

Science.gov (United States)

Fleury, Marie-Josée; Grenier, Guy; Bamvita, Jean-Marie; Chiocchio, François

2017-01-01

This study investigates work performance among 79 mental health teams in Quebec (Canada). We hypothesized that work performance was positively associated with the use of standardized clinical tools and clinical approaches, integration strategies, "clan culture," and mental health funding per capita. Work performance was measured using an adapted version of the Work Role Questionnaire. Variables were organized into four key areas: (1) team attributes, (2) organizational culture, (3) inter-organizational interactions, and (4) external environment. Work performance was associated with two types of organizational culture (clan and hierarchy) and with two team attributes (use of standardized clinical tools and approaches). This study was innovative in identifying associations between work performance and best practices, justifying their implementation. Recommendations are provided to develop organizational cultures promoting a greater focus on the external environment and integration strategies that strengthen external focus, service effectiveness, and innovation.

Exploring Graduate Students’ Attitudes towards Team Research and Their Scholarly Productivity: A Survey Guided by the Theory of Planned Behavior

Directory of Open Access Journals (Sweden)

Tianlan Wei

2015-01-01

Full Text Available This study explores the attitudinal and motivational factors underlying graduate students’ attitudes towards team research. Guided by the Theory of Planned Behavior, we hypothesize that attitude, subjective norm, and perceived behavioral control are three major determinants of graduate students’ intentions to conduct team research. An instrument was developed to measure the influences of these factors on students’ intentions and relevant scholarly productivity. A total of 281 graduate students from a large, comprehensive university in the southwest United States participated in the survey. Descriptive statistics reveal that around two-thirds of graduate students have no co-authored manuscripts submitted for publication since they started graduate school. Factor analyses validated the factor structure of the instrument, and the results of Structural Equation Modeling show that (a graduate students’ attitudes towards team research have a positive correlation with their attitudes towards individual research; (b attitude towards team research, subjective norm, and perceived behavioral control, along with students’ discipline/major areas and classification, account for 58% of the variance in the intention to conduct team research; and (c subjective norm appears to be the most influential factor in the model, followed by attitude; while perceived behavioral control is not of much importance. These findings provide implications for academic departments and programs to promote graduate students’ team research. Specifically, creating a climate for collaborative research in academic programs/disciplines/universities may work jointly with enhancing students’ appraisals of such collaborations.

Integrated Micro Product and Technology Development

DEFF Research Database (Denmark)

Hansen, Hans Nørgaard

2003-01-01

The paper addresses the issues of integrated micro product and technology development. The implications of the decisions in the design phase on the subsequent manufacturing processes are considered vital. A coherent process chain is a necessary prerequisite for the realisation of the industrial...... potential of micro technology....

Integrated design strategy for product life-cycle management

Science.gov (United States)

Johnson, G. Patrick

2001-02-01

Two major trends suggest new considerations for environmentally conscious manufacturing (ECM) -- the continuation of dematerialization and the growing trend toward goods becoming services. A diversity of existing research could be integrated around those trends in ways that can enhance ECM. Major research-based achievements in information, computation, and communications systems, sophisticated and inexpensive sensing capabilities, highly automated and precise manufacturing technologies, and new materials continue to drive the phenomenon of dematerialization - the reduction of the material and energy content of per capita GDP. Knowledge is also growing about the sociology, economics, mathematics, management and organization of complex socio-economic systems. And that has driven a trend towards goods evolving into services. But even with these significant trends, the value of material, energy, information and human resources incorporated into the manufacture, use and disposal of modern products and services often far exceeds the benefits realized. Multi-disciplinary research integrating these drivers with advances in ECM concepts could be the basis for a new strategy of production. It is argued that a strategy of integrating information resources with physical and human resources over product life cycles, together with considering products as streams of service over time, could lead to significant economic payoff. That strategy leads to an overall design concept to minimize costs of all resources over the product life cycle to more fully capture benefits of all resources incorporated into modern products. It is possible by including life cycle monitoring, periodic component replacement, re-manufacture, salvage and human factor skill enhancement into initial design.

A strategy for integrated low-input potato production

NARCIS (Netherlands)

Vereijken, P.H.; Loon, van C.D.

1991-01-01

Current systems of potato growing use large amounts of pesticides and fertilizers; these inputs are costly and cause environmental problems. In this paper a strategy for integrated low-input potato production is developed with the aim of reducing costs, improving product quality and reducing

Challenges to creating primary care teams in a public health centre ...

African Journals Online (AJOL)

The management of the CHC decided to create dedicated practice teams offering continuity of care, family-orientated care, and the integration of acute and chronic patients. The teams depended on effective collaboration between the doctors and the CNPs. Methods A co-operative inquiry group, consisting of two facility ...

COLLABORATING WITH THE COMMUNITY: THE EXTRA-TERRITORIAL TRANSLATIONAL RESEARCH TEAM.

Science.gov (United States)

Kotarba, Joseph A; Croisant, Sharon A; Elferink, Cornelis; Scott, Lauren E

2014-12-05

The purpose of the present study is to suggest a revision of the team science concept to the more inclusive extra-territorial research team (ETRT). Translational thinking is largely marked by the perception of the team as a thing-like structure at the center of the scientific activity. Collaboration accordingly involves bringing external others (e.g., scientists, community members, and clinicians) into the team through limited or dependent participation. We suggest that a promising and innovative way to see the team is as an idea : a schema for assembling and managing relationships among otherwise disparate individuals with vested interests in the problem at hand. Thus, the ETRT can be seen as a process as well as an object . We provide a case study derived from a qualitative analysis of the impact of the logic of translational science on a team assessment of environmental health following an off-coast oil disaster. The ETRT in question displayed the following principles of constructive relationship management: a high sense of adventure given the quick pace and timeliness given the relevance of the oil spill to all team members; regular meetings in the community to avoid the appearance of academic hegemony; open access by lay as well as institutional scientists; integration of emergency management coordinators into the group; and the languages of public health, environmental pharmacology/toxicology and coastal culture seamlessly interwoven in discussion. The ETRT model is an appropriate strategy for mobilizing and integrating the knowledge and skills needed for comprehensive science and service responses, especially during crisis.

RAA (Responsibility-Authority-Accountability): A transformation to teams

International Nuclear Information System (INIS)

Edwards, D.

1998-01-01

The paper describes the self-directed team management concept and its implementation at the Amax Coal West company. This management style resulted in 93% improved productivity, 86% decreased operating costs, 86% improved quality, and 70% better employee attitudes. Team benefits and their impact on human resources are summarized

Leadership Identity Development Through Reflection and Feedback in Team-Based Learning Medical Student Teams.

Science.gov (United States)

Alizadeh, Maryam; Mirzazadeh, Azim; Parmelee, Dean X; Peyton, Elizabeth; Mehrdad, Neda; Janani, Leila; Shahsavari, Hooman

2018-01-01

Studies on leadership identity development through reflection with Team-Based Learning (TBL) in medical student education are rare. We assumed that reflection and feedback on the team leadership process would advance the progression through leadership identity development stages in medical students within the context of classes using TBL. This study is a quasi-experimental design with pretest-posttest control group. The pretest and posttest were reflection papers of medical students about their experience of leadership during their TBL sessions. In the intervention group, TBL and a team-based, guided reflection and feedback on the team leadership process were performed at the end of all TBL sessions. In the other group, only TBL was used. The Stata 12 software was used. Leadership Identity was treated both as a categorical and quantitative variable to control for differences in baseline and gender variables. Chi-square, t tests, and linear regression analysis were performed. The population was a cohort of 2015-2016 medical students in a TBL setting at Tehran University of Medical Sciences, School of Medicine. Teams of four to seven students were formed by random sorting at the beginning of the academic year (intervention group n = 20 teams, control group n = 19 teams). At baseline, most students in both groups were categorized in the Awareness and Exploration stage of leadership identity: 51 (52%) in the intervention group and 59 (55%) in the control group: uncorrected χ 2 (3) = 15.6, design-based F(2.83, 108) = 4.87, p = .003. In the posttest intervention group, 36 (36%) were in exploration, 33 (33%) were in L-identified, 20 (20%) were in Leadership Differentiated, and 10 (10%) were in the Generativity. None were in the Awareness or Integration stages. In the control group, 3 (20%) were in Awareness, 56 (53%) were in Exploration, 35 (33%) were in Leader Identified, 13 (12%) were in Leadership Differentiated. None were in the Generativity and Integration stages

UPSAT guidelines. 1996 edition. Reference document for IAEA Uranium Productions Safety Assessment Teams (UPSATs)

International Nuclear Information System (INIS)

1996-05-01

The IAEA Uranium Production Safety Assessment Team (UPSAT) programme provides advice and assistance to Member States to enhance the safety and environmental performance of uranium production facilities during construction, commissioning and operation. Sound design and construction are prerequisite for the safe and environmentally responsible operation of uranium mines and mills. However, the safety of the facility depends ultimately on sound policies, procedures and practices; on the capability and reliability of the construction, commissioning and operating personnel; on comprehensive instructions; and on adequate resources. A positive attitude and conscientiousness on the part of the management and staff in discharging their responsibilities is important to safety. The UPSAT guidelines have been developed in the following areas: (1) management, organization and administration; (2) training and qualification; (3) operation (4) maintenance; (5) safety, fire protection, emergency planning, and preparedness; (6) radiation protection; (7) environmental monitoring programme; (8) construction management; (9) commissioning and decommissioning

Incorporating Solid Modeling and Team-Based Design into Freshman Engineering Graphics.

Science.gov (United States)

Buchal, Ralph O.

2001-01-01

Describes the integration of these topics through a major team-based design and computer aided design (CAD) modeling project in freshman engineering graphics at the University of Western Ontario. Involves n=250 students working in teams of four to design and document an original Lego toy. Includes 12 references. (Author/YDS)

Product development for catering - how to integrate issues on nutrition, quality and environment in the products

DEFF Research Database (Denmark)

Jørgensen, Michael Søgaard

1996-01-01

Overview of the experience with integration of issues on nutrition, quality and environment from a development and technology assessment project about product development for the catering sector......Overview of the experience with integration of issues on nutrition, quality and environment from a development and technology assessment project about product development for the catering sector...

Professional Team Foundation Server 2012

CERN Document Server

Blankenship, Ed; Holliday, Grant; Keller, Brian

2012-01-01

A comprehensive guide to using Microsoft Team Foundation Server 2012 Team Foundation Server has become the leading Microsoft productivity tool for software management, and this book covers what developers need to know to use it effectively. Fully revised for the new features of TFS 2012, it provides developers and software project managers with step-by-step instructions and even assists those who are studying for the TFS 2012 certification exam. You'll find a broad overview of TFS, thorough coverage of core functions, a look at extensibility options, and more, written by Microsoft ins

The Tiger Team Process in the Rebaselining of the Plutonium Finishing Plant (PFP)

International Nuclear Information System (INIS)

BAILEY, R.W.

2000-01-01

This paper will describe the integrated, teaming approach and planning process utilized by the Tiger Team in the development of the IPMP. This paper will also serve to document the benefits derived from this implementation process

The Vehicle Integrated Performance Analysis Experience: Reconnecting With Technical Integration

Science.gov (United States)

McGhee, D. S.

2006-01-01

Very early in the Space Launch Initiative program, a small team of engineers at MSFC proposed a process for performing system-level assessments of a launch vehicle. Aimed primarily at providing insight and making NASA a smart buyer, the Vehicle Integrated Performance Analysis (VIPA) team was created. The difference between the VIPA effort and previous integration attempts is that VIPA a process using experienced people from various disciplines, which focuses them on a technically integrated assessment. The foundations of VIPA s process are described. The VIPA team also recognized the need to target early detailed analysis toward identifying significant systems issues. This process is driven by the T-model for technical integration. VIPA s approach to performing system-level technical integration is discussed in detail. The VIPA process significantly enhances the development and monitoring of realizable project requirements. VIPA s assessment validates the concept s stated performance, identifies significant issues either with the concept or the requirements, and then reintegrates these issues to determine impacts. This process is discussed along with a description of how it may be integrated into a program s insight and review process. The VIPA process has gained favor with both engineering and project organizations for being responsive and insightful

NARAC Dispersion Model Product Integration With RadResponder

Energy Technology Data Exchange (ETDEWEB)

Aluzzi, Fernando [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2015-09-30

Work on enhanced cooperation and interoperability of Nuclear Incident Response Teams (NIRT) is a joint effort between DHS/FEMA, DOE/NNSA and EPA. One such effort was the integration between the RadResponder Network, a resource sponsored by FEMA for the management of radiological data during an emergency, and the National Atmospheric Advisory Center (NARAC), a DOE/NNSA modeling resource whose predictions are used to aid radiological emergency preparedness and response. Working together under a FEMA-sponsored project these two radiological response assets developed a capability to read and display plume model prediction results from the NARAC computer system in the RadResponder software tool. As a result of this effort, RadResponder users have been provided with NARAC modeling predictions of contamination areas, radiological dose levels, and protective action areas (e.g., areas warranting worker protection or sheltering/evacuation) to help guide protective action decisions and field monitoring surveys, and gain key situation awareness following a radiological/nuclear accident or incident (e.g., nuclear power plant accident, radiological dispersal device incident, or improvised nuclear detonation incident). This document describes the details of this integration effort.

Creativity and Creative Teams

Science.gov (United States)

Wood, Richard M.; Bauer, Steven X. S.; Hunter, Craig A.

2001-01-01

A review of the linkage between knowledge, creativity, and design is presented and related to the best practices of multidisciplinary design teams. The discussion related to design and design teams is presented in the context of both the complete aerodynamic design community and specifically the work environment at the NASA Langley Research Center. To explore ways to introduce knowledge and creativity into the research and design environment at NASA Langley Research Center a creative design activity was executed within the context of a national product development activity. The success of the creative design team activity gave rise to a need to communicate the experience in a straightforward and managed approach. As a result the concept of creative potential its formulated and assessed with a survey of a small portion of the aeronautics research staff at NASA Langley Research Center. The final section of the paper provides recommendations for future creative organizations and work environments.

Groups Meet . . . Teams Improve: Building Teams That Learn

Science.gov (United States)

Hillier, Janet; Dunn-Jensen, Linda M.

2013-01-01

Although most business students participate in team-based projects during undergraduate or graduate course work, the team experience does not always teach team skills or capture the team members' potential: Students complete the task at hand but the explicit process of becoming a team is often not learned. Drawing from organizational learning…

Teams make it work: how team work engagement mediates between social resources and performance in teams.

Science.gov (United States)

Torrente, Pedro; Salanova, Marisa; Llorens, Susana; Schaufeli, Wilmar B

2012-02-01

In this study we analyze the mediating role of team work engagement between team social resources (i.e., supportive team climate, coordination, teamwork), and team performance (i.e., in-role and extra-role performance) as predicted by the Job Demands-Resources Model. Aggregated data of 533 employees nested within 62 teams and 13 organizations were used, whereas team performance was assessed by supervisor ratings. Structural equation modeling revealed that, as expected, team work engagement plays a mediating role between social resources perceived at the team level and team performance as assessed by the supervisor.

Openness to language and value diversity fosters multicultural team creativity and performance

DEFF Research Database (Denmark)

Lauring, Jakob; Paunova, Minna; Butler, Christina

2015-01-01

Multicultural teams are increasingly employed by organizations as a way to achieve international coordination, particularly when creativity and innovation are desired. Unfortunately, studies often fail to demonstrate the purported benefits associated with these teams, reporting difficulties with ...... open to value diversity. We conclude that multicultural teams are in want of a climate that is welcoming to both linguistic and cultural differences and suggest implications for theory and practice....... with communication and social integration, inhibiting creativity and performance. A survey-based study of multicultural academic teams (n = 1085) demonstrates that teams that are open to language diversity are more creative and perform better. We observe that performance is enhanced even further when teams are also...

Minority dissent and team innovation: the importance of participation in decision making

NARCIS (Netherlands)

de Dreu, C.K.W.; Beersma, B.

2001-01-01

This study integrates research on minority dissent and individual creativity, as well as team diversity and the quality of group decision making, with research on team participation in decision making. From these lines of research, it was proposed that minority dissent would predict innovation in

Minority dissent and team innovation : the importance of participation in decision making

NARCIS (Netherlands)

Dreu, de C.K.W.; West, M.A.

2001-01-01

This study integrates research on minority dissent and individual creativity, as well as team diversity and the quality of group decision making, with research on team participation in decision making. From these lines of research, it was proposed that minority dissent would predict innovation in

Managing and mitigating conflict in healthcare teams: an integrative review.

Science.gov (United States)

Almost, Joan; Wolff, Angela C; Stewart-Pyne, Althea; McCormick, Loretta G; Strachan, Diane; D'Souza, Christine

2016-07-01

To review empirical studies examining antecedents (sources, causes, predictors) in the management and mitigation of interpersonal conflict. Providing quality care requires positive, collaborative working relationships among healthcare team members. In today's increasingly stress-laden work environments, such relationships can be threatened by interpersonal conflict. Identifying the underlying causes of conflict and choice of conflict management style will help practitioners, leaders and managers build an organizational culture that fosters collegiality and create the best possible environment to engage in effective conflict management. Integrative literature review. CINAHL, MEDLINE, PsycINFO, Proquest ABI/Inform, Cochrane Library and Joanne Briggs Institute Library were searched for empirical studies published between 2002-May 2014. The review was informed by the approach of Whittemore and Knafl. Findings were extracted, critically examined and grouped into themes. Forty-four papers met the inclusion criteria. Several antecedents influence conflict and choice of conflict management style including individual characteristics, contextual factors and interpersonal conditions. Sources most frequently identified include lack of emotional intelligence, certain personality traits, poor work environment, role ambiguity, lack of support and poor communication. Very few published interventions were found. By synthesizing the knowledge and identifying antecedents, this review offers evidence to support recommendations on managing and mitigating conflict. As inevitable as conflict is, it is the responsibility of everyone to increase their own awareness, accountability and active participation in understanding conflict and minimizing it. Future research should investigate the testing of interventions to minimize these antecedents and, subsequently, reduce conflict. © 2016 John Wiley & Sons Ltd.

Integration of the Scrum methodology in mechatronic product development

OpenAIRE

Mauri Also, Joan Josep

2015-01-01

The purpose of this study was to demonstrate if it would be possible for a mechatronic product development team to use Scrum, an Agile Development framework with both, the students of UVIC-UCC and the company ITQ GmbH, behind the student project called Mi5. The Agile philosophy and methods have revolutionized the software development industry in the last decade, and therefore it was of interest to see if this new way of working would be applicable in other disciplines. Thus, the study focu...

Questioning in Distributed Product Development Teams: Supporting Shared Understanding

DEFF Research Database (Denmark)

Cash, Philip; Ahmed-Kristensen, Saeema

2015-01-01

globally distributed NPD activities. Poor shared understanding can ultimately result in delays and rework. One major antecedent of shared understanding development is question asking. This work uses a quasiexperimental study to test the impact of questioning support on different types of distributed teams...

Information sharing systems and teamwork between sub-teams: a mathematical modeling perspective

Science.gov (United States)

Tohidi, Hamid; Namdari, Alireza; Keyser, Thomas K.; Drzymalski, Julie

2017-12-01

Teamwork contributes to a considerable improvement in quality and quantity of the ultimate outcome. Collaboration and alliance between team members bring a substantial progress for any business. However, it is imperative to acquire an appropriate team since many factors must be considered in this regard. Team size may represent the effectiveness of a team and it is of paramount importance to determine what the ideal team size exactly should be. In addition, information technology increasingly plays a differentiating role in productivity and adopting appropriate information sharing systems may contribute to improvement in efficiency especially in competitive markets when there are numerous producers that compete with each other. The significance of transmitting information to individuals is inevitable to assure an improvement in team performance. In this paper, a model of teamwork and its organizational structure are presented. Furthermore, a mathematical model is proposed in order to characterize a group of sub-teams according to two criteria: team size and information technology. The effect of information technology on performance of team and sub-teams as well as optimum size of those team and sub-teams from a productivity perspective are studied. Moreover, a quantitative sensitivity analysis is presented in order to analyze the interaction between these two factors through a sharing system.

Team Learning Beliefs and Behaviours in Response Teams

Science.gov (United States)

Boon, Anne; Raes, Elisabeth; Kyndt, Eva; Dochy, Filip

2013-01-01

Purpose: Teams, teamwork and team learning have been the subject of many research studies over the last decades. This article aims at investigating and confirming the Team Learning Beliefs and Behaviours (TLB&B) model within a very specific population, i.e. police and firemen teams. Within this context, the paper asks whether the team's…

An Integrated Membrane Process for Butenes Production

Directory of Open Access Journals (Sweden)

Leonardo Melone

2016-11-01

Full Text Available Iso-butene is an important material for the production of chemicals and polymers. It can take part in various chemical reactions, such as hydrogenation, oxidation and other additions owing to the presence of a reactive double bond. It is usually obtained as a by-product of a petroleum refinery, by Fluidized Catalytic Cracking (FCC of naphtha or gas-oil. However, an interesting alternative to iso-butene production is n-butane dehydroisomerization, which allows the direct conversion of n-butane via dehydrogenation and successive isomerization. In this work, a simulation analysis of an integrated membrane system is proposed for the production and recovery of butenes. The dehydroisomerization of n-butane to iso-butene takes place in a membrane reactor where the hydrogen is removed from the reaction side with a Pd/Ag alloys membrane. Afterwards, the retentate and permeate post-processing is performed in membrane separation units for butenes concentration and recovery. Four different process schemes are developed. The performance of each membrane unit is analyzed by appropriately developed performance maps, to identify the operating conditions windows and the membrane permeation properties required to maximize the recovery of the iso-butene produced. An analysis of integrated systems showed a yield of butenes higher than the other reaction products with high butenes recovery in the gas separation section, with values of molar concentration between 75% and 80%.

Personality and community prevention teams: Dimensions of team leader and member personality predicting team functioning.

Science.gov (United States)

Feinberg, Mark E; Kim, Ji-Yeon; Greenberg, Mark T

2008-11-01

The predictors and correlates of positive functioning among community prevention teams have been examined in a number of research studies; however, the role of personality has been neglected. In this study, we examined whether team member and leader personality dimensions assessed at the time of team formation predicted local prevention team functioning 2.5-3.5 years later. Participants were 159 prevention team members in 14 communities participating in the PROSPER study of prevention program dissemination. Three aspects of personality, aggregated at the team level, were examined as predictors: Openness to Experience, Conscientiousness, and Agreeableness. A series of multivariate regression analyses were performed that accounted for the interdependency of five categories of team functioning. Results showed that average team member Openness was negatively, and Conscientiousness was positively linked to team functioning. The findings have implications for decisions about the level and nature of technical assistance support provided to community prevention teams.

Microdynamics in diverse teams : A review and integration of the diversity and stereotyping literatures

NARCIS (Netherlands)

van Dijk, J.; Meyer, B.; van Engen, M.L.; Loyd, D.L.

2017-01-01

Research on the consequences of diversity in teams continues to produce inconsistent results. We review the recent developments in diversity research and identify two shortcomings. First, an understanding of the microdynamics affecting processes and outcomes in diverse teams is lacking. Second,

Nuclear Nonproliferation Ontology Assessment Team Final Report

Energy Technology Data Exchange (ETDEWEB)

Strasburg, Jana D.; Hohimer, Ryan E.

2012-01-01

Final Report for the NA22 Simulations, Algorithm and Modeling (SAM) Ontology Assessment Team's efforts from FY09-FY11. The Ontology Assessment Team began in May 2009 and concluded in September 2011. During this two-year time frame, the Ontology Assessment team had two objectives: (1) Assessing the utility of knowledge representation and semantic technologies for addressing nuclear nonproliferation challenges; and (2) Developing ontological support tools that would provide a framework for integrating across the Simulation, Algorithm and Modeling (SAM) program. The SAM Program was going through a large assessment and strategic planning effort during this time and as a result, the relative importance of these two objectives changed, altering the focus of the Ontology Assessment Team. In the end, the team conducted an assessment of the state of art, created an annotated bibliography, and developed a series of ontological support tools, demonstrations and presentations. A total of more than 35 individuals from 12 different research institutions participated in the Ontology Assessment Team. These included subject matter experts in several nuclear nonproliferation-related domains as well as experts in semantic technologies. Despite the diverse backgrounds and perspectives, the Ontology Assessment team functioned very well together and aspects could serve as a model for future inter-laboratory collaborations and working groups. While the team encountered several challenges and learned many lessons along the way, the Ontology Assessment effort was ultimately a success that led to several multi-lab research projects and opened up a new area of scientific exploration within the Office of Nuclear Nonproliferation and Verification.

An integrated design experience on a wet-tree production semisubmersible

Energy Technology Data Exchange (ETDEWEB)

Fales, Raymond P.; Lee, Craig; Chen Xiang; Zhengquan Zhou [ABB FPS Houston, TX (United States)

2004-07-01

The semisubmersible platform has been a reliable work platform for the offshore oil and gas industry for over 40 years. The Semisubmersible is a very mature concept with hundreds of examples in use. Traditionally during the design phase, the motions have been developed to suit the independent services, drilling, offshore operations or production. However, recently with the move to ultra-deep water depths and the use of Steel Catenary Risers (SCRs), the design of Semisubmersible has to be considered as an integrated floating production system, to satisfy all the requirements from platform global performance, SCRs strength and fatigue, mooring, topside payload and layout, hull strength, deck structure, marine system layout, stability, fabrication and installation. These requirements usually conflict each other. As such it is imperative to consider them together, adjusting the design parameters during design loops to obtain an optimal design product. This paper will describe the integrated design process used and the optimal design principles applied to satisfy these conflicting requirements and provide an example of a wet-tree production semisubmersible integrated design. Particular emphasis will be on global performance, SCR design, deck structure arrangement options, fabrication and integration. (author)

Integrated SNG Production in a Typical Nordic Sawmill

Directory of Open Access Journals (Sweden)

Sennai Mesfun

2016-04-01

Full Text Available Advanced biomass-based motor fuels and chemicals are becoming increasingly important to replace fossil energy sources within the coming decades. It is likely that the new biorefineries will evolve mainly from existing forest industry sites, as they already have the required biomass handling infrastructure in place. The main objective of this work is to assess the potential for increasing the profit margin from sawmill byproducts by integrating innovative downstream processes. The focus is on the techno-economic evaluation of an integrated site for biomass-based synthetic natural gas (bio-SNG production. The option of using the syngas in a biomass-integrated gasification combined cycle (b-IGCC for the production of electricity (instead of SNG is also considered for comparison. The process flowsheets that are used to analyze the energy and material balances are modelled in MATLAB and Simulink. A mathematical process integration model of a typical Nordic sawmill is used to analyze the effects on the energy flows in the overall site, as well as to evaluate the site economics. Different plant sizes have been considered in order to assess the economy-of-scale effect. The technical data required as input are collected from the literature and, in some cases, from experiments. The investment cost is evaluated on the basis of conducted studies, third party supplier budget quotations and in-house database information. This paper presents complete material and energy balances of the considered processes and the resulting process economics. Results show that in order for the integrated SNG production to be favored, depending on the sawmill size, a biofuel subsidy in the order of 28–52 €/MWh SNG is required.

The Creation and Operation of Internal High Performance Modern Enterprises Team

Institute of Scientific and Technical Information of China (English)

Shengyu WANG

2015-01-01

The future of enterprises mainly depends on product research and development. For the modern enterprises, high performance project team is the most important means of R ＆ D projects. According to the interviews and survey found of a plurality of enterprise project R ＆ D team. the internal high performance team of modern business is good or bad, its key lies in whether the team managers for the team creation and management is in place, this is the most difficult place for the high performance team management system, especially the team leadership. Based on this, this paper discusses on the creation and management of high performance modern enterprise team, aiming to provide valuable reference for the enterprise team management.

A Project Team Analysis Using Tuckman's Model of Small-Group Development.

Science.gov (United States)

Natvig, Deborah; Stark, Nancy L

2016-12-01

Concerns about equitable workloads for nursing faculty have been well documented, yet a standardized system for workload management does not exist. A project team was challenged to establish an academic workload management system when two dissimilar universities were consolidated. Tuckman's model of small-group development was used as the framework for the analysis of processes and effectiveness of a workload project team. Agendas, notes, and meeting minutes were used as the primary sources of information. Analysis revealed the challenges the team encountered. Utilization of a team charter was an effective tool in guiding the team to become a highly productive group. Lessons learned from the analysis are discussed. Guiding a diverse group into a highly productive team is complex. The use of Tuckman's model of small-group development provided a systematic mechanism to review and understand group processes and tasks. [J Nurs Educ. 2016;55(12):675-681.]. Copyright 2016, SLACK Incorporated.

Approach to team skills training of nuclear power plant control room crews

International Nuclear Information System (INIS)

Davis, L.T.; Gaddy, C.D.; Turney, J.R.

1985-07-01

An investigation of current team skills training practices and research was conducted by General Physics Corporation for the Office of Nuclear Reactor Regulation. The methodology used included a review of relevant team skills training literature and a workshop to collect inputs from team training practitioners and researchers from the public and private sectors. The workshop was attended by representatives from nuclear utility training organizations, the commercial airline industry, federal agencies, and defense training and research commands. The literature reviews and workshop results provided the input for a suggested approach to team skills training that can be integrated into existing training programs for control room operating crews. The approach includes five phases: (1) team skills objectives development, (2) basic team skills training, (3) team task training, (4) team skills evaluation, and (5) team training program evaluation. Supporting background information and a user-oriented description of the approach to team skills training are provided. 47 refs

Engineering within the assembly, verification, and integration (AIV) process in ALMA

Science.gov (United States)

Lopez, Bernhard; McMullin, Joseph P.; Whyborn, Nicholas D.; Duvall, Eugene

2010-07-01

The Atacama Large Millimeter/submillimeter Array (ALMA) is a joint project between astronomical organizations in Europe, North America, and East Asia, in collaboration with the Republic of Chile. ALMA will consist of at least 54 twelve-meter antennas and 12 seven-meter antennas operating as an interferometer in the millimeter and sub-millimeter wavelength range. It will be located at an altitude above 5000m in the Chilean Atacama desert. As part of the ALMA construction phase the Assembly, Verification and Integration (AIV) team receives antennas and instrumentation from Integrated Product Teams (IPTs), verifies that the sub-systems perform as expected, performs the assembly and integration of the scientific instrumentation and verifies that functional and performance requirements are met. This paper aims to describe those aspects related to the AIV Engineering team, its role within the 4-station AIV process, the different phases the group underwent, lessons learned and potential space for improvement. AIV Engineering initially focused on the preparation of the necessary site infrastructure for AIV activities, on the purchase of tools and equipment and on the first ALMA system installations. With the first antennas arriving on site the team started to gather experience with AIV Station 1 beacon holography measurements for the assessment of the overall antenna surface quality, and with optical pointing to confirm the antenna pointing and tracking capabilities. With the arrival of the first receiver AIV Station 2 was developed which focuses on the installation of electrical and cryogenic systems and incrementally establishes the full connectivity of the antenna as an observing platform. Further antenna deliveries then allowed to refine the related procedures, develop staff expertise and to transition towards a more routine production process. Stations 3 and 4 deal with verification of the antenna with integrated electronics by the AIV Science Team and is not covered

Ergonomics Integration Omproving Production Process Management in Enterprises of Latvia

OpenAIRE

Henrijs Kaļķis

2013-01-01

Dotoral thesis ERGONOMICS INTEGRATION IMPROVING PRODUCTION PROCESS MANAGEMENT IN ENTERPRISES OF LATVIA ANNOTATION Ergonomics integration in process management has great significance in organisations` growth of productivity. It is a new approach to entrepreneurship and business strategy, where ergonomic aspects and values are taken into account in ensuring the effective process management and profitability of enterprises. This study is aimed at solution of the problem of e...

Numerical evaluation of integrals containing a spherical Bessel function by product integration

International Nuclear Information System (INIS)

Lehman, D.R.; Parke, W.C.; Maximon, L.C.

1981-01-01

A method is developed for numerical evaluation of integrals with k-integration range from 0 to infinity that contain a spherical Bessel function j/sub l/(kr) explicitly. The required quadrature weights are easily calculated and the rate of convergence is rapid: only a relatively small number of quadrature points is needed: for an accurate evaluation even when r is large. The quadrature rule is obtained by the method of product integration. With the abscissas chosen to be those of Clenshaw--Curtis and the Chebyshev polynomials as the interpolating polynomials, quadrature weights are obtained that depend on the spherical Bessel function. An inhomogenous recurrence relation is derived from which the weights can be calculated without accumulation of roundoff error. The procedure is summarized as an easily implementable algorithm. Questions of convergence are discussed and the rate of convergence demonstrated for several test integrals. Alternative procedures are given for generating the integration weights and an error analysis of the method is presented

When teams fail to self-regulate: Predictors and outcomes of team procrastination among debating teams

NARCIS (Netherlands)

E.A.J. van Hooft (Edwin); H. van Mierlo (Heleen)

2018-01-01

textabstractModels of team development have indicated that teams typically engage in task delay during the first stages of the team's life cycle. An important question is to what extent this equally applies to all teams, or whether there is variation across teams in the amount of task delay. The

On teams, teamwork, and team performance: discoveries and developments.

Science.gov (United States)

Salas, Eduardo; Cooke, Nancy J; Rosen, Michael A

2008-06-01

We highlight some of the key discoveries and developments in the area of team performance over the past 50 years, especially as reflected in the pages of Human Factors. Teams increasingly have become a way of life in many organizations, and research has kept up with the pace. We have characterized progress in the field in terms of eight discoveries and five challenges. Discoveries pertain to the importance of shared cognition, the measurement of shared cognition, advances in team training, the use of synthetic task environments for research, factors influencing team effectiveness, models of team effectiveness, a multidisciplinary perspective, and training and technological interventions designed to improve team effectiveness. Challenges that are faced in the coming decades include an increased emphasis on team cognition; reconfigurable, adaptive teams; multicultural influences; and the need for naturalistic study and better measurement. Work in human factors has contributed significantly to the science and practice of teams, teamwork, and team performance. Future work must keep pace with the increasing use of teams in organizations. The science of teams contributes to team effectiveness in the same way that the science of individual performance contributes to individual effectiveness.

Environmental benefits of the integrated production of ethanol and biodiesel

International Nuclear Information System (INIS)

Souza, Simone Pereira; Seabra, Joaquim E.A.

2013-01-01

Highlights: ► Integrated bioenergy systems can favor the sustainability of biofuels. ► We analyzed the integrated production of ethanol and biodiesel in Brazil. ► GHG emissions and fossil energy use in the ethanol life cycle would be reduced. ► Socio-economic and other environmental aspects must be analyzed in future works. -- Abstract: The biorefinery of the future will be an integrated complex that makes a variety of products (e.g., biofuels, chemicals, power and protein) from a variety of feedstocks. The objective of this work was to evaluate the environmental benefits, compared to the traditional sugarcane ethanol system, of the integrated production of ethanol and biodiesel through a sugarcane–soybean biorefinery concept in Brazil. The environmental aspects considered here were the fossil energy use and the greenhouse gases (GHGs) emissions associated with ethanol production. In the Integrated System, soybean would be cultivated in part of the sugarcane reforming areas, which represents ∼17% of the total sugarcane area. Sugarcane and soybean oil would be processed in a combined ethanol–biodiesel plant, which would use only bagasse as fuel. All the demand for utilities of the biodiesel plant would be provided by the distillery. The output products of the combined plant would comprise sugarcane ethanol, soybean biodiesel (which would be used as diesel (B5) substitute in the sugarcane cultivation), bioelectricity and glycerin. The results indicate that the Integrated System can reduce the fossil energy consumption from 75 to 37 kJ/MJ of ethanol, when compared to the traditional system. For GHG emissions, the value would drop from 22.5 to 19.7 g CO 2 eq/MJ of ethanol. This analysis shows that the Integrated System is an important option to contribute to ethanol’s life cycle independence from fossil resources. This is an attractive environmental aspect, but socio-economic (as well as other environmental) aspects should also be analyzed in order to

Teamwork in perioperative nursing. Understanding team development, effectiveness, evaluation.

Science.gov (United States)

Farley, M J

1991-03-01

Teams are an essential part of perioperative nursing practice. Nurses who have a knowledge of teamwork and experience in working on teams have a greater understanding of the processes and problems involved as teams develop from new, immature teams to those that are mature and effective. This understanding will assist nurses in helping their teams achieve a higher level of productivity, and members will be more satisfied with team efforts. Team development progresses through several stages. Each stage has certain characteristics and desired outcomes. At each stage, team members and leaders have certain responsibilities. Team growth does not take place automatically and inevitably, but as a consequence of conscious and unconscious efforts of its leader and members to solve problems and satisfy needs. Building and maintaining a team is certainly work, but work that brings a great deal of satisfaction and feelings of pride in accomplishment. According to I Tenzer, RN, MS, teamwork "is not a panacea; it is a viable approach to developing a hospital's most valuable resource--people."

The SMART Theory and Modeling Team: An Integrated Element of Mission Development and Science Analysis

Science.gov (United States)

Hesse, Michael; Birn, J.; Denton, Richard E.; Drake, J.; Gombosi, T.; Hoshino, M.; Matthaeus, B.; Sibeck, D.

2005-01-01

When targeting physical understanding of space plasmas, our focus is gradually shifting away from discovery-type investigations to missions and studies that address our basic understanding of processes we know to be important. For these studies, theory and models provide physical predictions that need to be verified or falsified by empirical evidence. Within this paradigm, a tight integration between theory, modeling, and space flight mission design and execution is essential. NASA's Magnetospheric MultiScale (MMS) mission is a pathfinder in this new era of space research. The prime objective of MMS is to understand magnetic reconnection, arguably the most fundamental of plasma processes. In particular, MMS targets the microphysical processes, which permit magnetic reconnection to operate in the collisionless plasmas that permeate space and astrophysical systems. More specifically, MMS will provide closure to such elemental questions as how particles become demagnetized in the reconnection diffusion region, which effects determine the reconnection rate, and how reconnection is coupled to environmental conditions such as magnetic shear angles. Solutions to these problems have remained elusive in past and present spacecraft missions primarily due to instrumental limitations - yet they are fundamental to the large-scale dynamics of collisionless plasmas. Owing to the lack of measurements, most of our present knowledge of these processes is based on results from modern theory and modeling studies of the reconnection process. Proper design and execution of a mission targeting magnetic reconnection should include this knowledge and have to ensure that all relevant scales and effects can be resolved by mission measurements. The SMART mission has responded to this need through a tight integration between instrument and theory and modeling teams. Input from theory and modeling is fed into all aspects of science mission design, and theory and modeling activities are tailored

Integration of research and practice to improve public health and healthcare delivery through a collaborative 'Health Integration Team' model - a qualitative investigation.

Science.gov (United States)

Redwood, Sabi; Brangan, Emer; Leach, Verity; Horwood, Jeremy; Donovan, Jenny L

2016-06-22

Economic considerations and the requirement to ensure the quality, safety and integration of research with health and social care provision have given rise to local developments of collaborative organisational forms and strategies to span the translational gaps. One such model - the Health Integration Team (HIT) model in Bristol in the United Kingdom (UK) - brings together National Health Service (NHS) organisations, universities, local authorities, patients and the public to facilitate the systematic application of evidence to promote integration across healthcare pathways. This study aimed to (1) provide empirical evidence documenting the evolution of the model; (2) to identify the social and organisational processes and theory of change underlying healthcare knowledge and practice; and (3) elucidate the key aspects of the HIT model for future development and translation to other localities. Contemporaneous documents were analysed, using procedures associated with Framework Analysis to produce summarised data for descriptive accounts. In-depth interviews were undertaken with key informants and analysed thematically. Comparative methods were applied to further analyse the two data sets. One hundred forty documents were analysed and 10 interviews conducted with individuals in leadership positions in the universities, NHS commissioning and provider organisations involved in the design and implementation of the HIT model. Data coalesced around four overarching themes: 'Whole system' engagement, requiring the active recruitment of all those who have a stake in the area of practice being considered, and 'collaboration' to enable coproduction were identified as 'process' themes. System-level integration and innovation were identified as potential 'outcomes' with far-reaching impacts on population health and service delivery. The HIT model emerged as a particular response to the perceived need for integration of research and practice to improve public health and

Integrating ergonomics into the product development process