A path integral approach to the Hodgkin-Huxley model

Science.gov (United States)

Baravalle, Roman; Rosso, Osvaldo A.; Montani, Fernando

2017-11-01

To understand how single neurons process sensory information, it is necessary to develop suitable stochastic models to describe the response variability of the recorded spike trains. Spikes in a given neuron are produced by the synergistic action of sodium and potassium of the voltage-dependent channels that open or close the gates. Hodgkin and Huxley (HH) equations describe the ionic mechanisms underlying the initiation and propagation of action potentials, through a set of nonlinear ordinary differential equations that approximate the electrical characteristics of the excitable cell. Path integral provides an adequate approach to compute quantities such as transition probabilities, and any stochastic system can be expressed in terms of this methodology. We use the technique of path integrals to determine the analytical solution driven by a non-Gaussian colored noise when considering the HH equations as a stochastic system. The different neuronal dynamics are investigated by estimating the path integral solutions driven by a non-Gaussian colored noise q. More specifically we take into account the correlational structures of the complex neuronal signals not just by estimating the transition probability associated to the Gaussian approach of the stochastic HH equations, but instead considering much more subtle processes accounting for the non-Gaussian noise that could be induced by the surrounding neural network and by feedforward correlations. This allows us to investigate the underlying dynamics of the neural system when different scenarios of noise correlations are considered.

Pesticide fate at regional scale: Development of an integrated model approach and application

Science.gov (United States)

Herbst, M.; Hardelauf, H.; Harms, R.; Vanderborght, J.; Vereecken, H.

As a result of agricultural practice many soils and aquifers are contaminated with pesticides. In order to quantify the side-effects of these anthropogenic impacts on groundwater quality at regional scale, a process-based, integrated model approach was developed. The Richards’ equation based numerical model TRACE calculates the three-dimensional saturated/unsaturated water flow. For the modeling of regional scale pesticide transport we linked TRACE with the plant module SUCROS and with 3DLEWASTE, a hybrid Lagrangian/Eulerian approach to solve the convection/dispersion equation. We used measurements, standard methods like pedotransfer-functions or parameters from literature to derive the model input for the process model. A first-step application of TRACE/3DLEWASTE to the 20 km 2 test area ‘Zwischenscholle’ for the period 1983-1993 reveals the behaviour of the pesticide isoproturon. The selected test area is characterised by an intense agricultural use and shallow groundwater, resulting in a high vulnerability of the groundwater to pesticide contamination. The model results stress the importance of the unsaturated zone for the occurrence of pesticides in groundwater. Remarkable isoproturon concentrations in groundwater are predicted for locations with thin layered and permeable soils. For four selected locations we used measured piezometric heads to validate predicted groundwater levels. In general, the model results are consistent and reasonable. Thus the developed integrated model approach is seen as a promising tool for the quantification of the agricultural practice impact on groundwater quality.

An integrated artificial neural networks approach for predicting global radiation

International Nuclear Information System (INIS)

Azadeh, A.; Maghsoudi, A.; Sohrabkhani, S.

2009-01-01

This article presents an integrated artificial neural network (ANN) approach for predicting solar global radiation by climatological variables. The integrated ANN trains and tests data with multi layer perceptron (MLP) approach which has the lowest mean absolute percentage error (MAPE). The proposed approach is particularly useful for locations where no available measurement equipment. Also, it considers all related climatological and meteorological parameters as input variables. To show the applicability and superiority of the integrated ANN approach, monthly data were collected for 6 years (1995-2000) in six nominal cities in Iran. Separate model for each city is considered and the quantity of solar global radiation in each city is calculated. Furthermore an integrated ANN model has been introduced for prediction of solar global radiation. The acquired results of the integrated model have shown high accuracy of about 94%. The results of the integrated model have been compared with traditional angstrom's model to show its considerable accuracy. Therefore, the proposed approach can be used as an efficient tool for prediction of solar radiation in the remote and rural locations with no direct measurement equipment.

An integrated chronic disease management model: a diagonal approach to health system strengthening in South Africa.

Science.gov (United States)

Mahomed, Ozayr Haroon; Asmall, Shaidah; Freeman, Melvyn

2014-11-01

The integrated chronic disease management model provides a systematic framework for creating a fundamental change in the orientation of the health system. This model adopts a diagonal approach to health system strengthening by establishing a service-linked base to training, supervision, and the opportunity to try out, assess, and implement integrated interventions.

Global Environmental Change: An integrated modelling approach

International Nuclear Information System (INIS)

Den Elzen, M.

1993-01-01

Two major global environmental problems are dealt with: climate change and stratospheric ozone depletion (and their mutual interactions), briefly surveyed in part 1. In Part 2 a brief description of the integrated modelling framework IMAGE 1.6 is given. Some specific parts of the model are described in more detail in other Chapters, e.g. the carbon cycle model, the atmospheric chemistry model, the halocarbon model, and the UV-B impact model. In Part 3 an uncertainty analysis of climate change and stratospheric ozone depletion is presented (Chapter 4). Chapter 5 briefly reviews the social and economic uncertainties implied by future greenhouse gas emissions. Chapters 6 and 7 describe a model and sensitivity analysis pertaining to the scientific uncertainties and/or lacunae in the sources and sinks of methane and carbon dioxide, and their biogeochemical feedback processes. Chapter 8 presents an uncertainty and sensitivity analysis of the carbon cycle model, the halocarbon model, and the IMAGE model 1.6 as a whole. Part 4 presents the risk assessment methodology as applied to the problems of climate change and stratospheric ozone depletion more specifically. In Chapter 10, this methodology is used as a means with which to asses current ozone policy and a wide range of halocarbon policies. Chapter 11 presents and evaluates the simulated globally-averaged temperature and sea level rise (indicators) for the IPCC-1990 and 1992 scenarios, concluding with a Low Risk scenario, which would meet the climate targets. Chapter 12 discusses the impact of sea level rise on the frequency of the Dutch coastal defence system (indicator) for the IPCC-1990 scenarios. Chapter 13 presents projections of mortality rates due to stratospheric ozone depletion based on model simulations employing the UV-B chain model for a number of halocarbon policies. Chapter 14 presents an approach for allocating future emissions of CO 2 among regions. (Abstract Truncated)

Effective use of integrated hydrological models in basin-scale water resources management: surrogate modeling approaches

Science.gov (United States)

Zheng, Y.; Wu, B.; Wu, X.

2015-12-01

Integrated hydrological models (IHMs) consider surface water and subsurface water as a unified system, and have been widely adopted in basin-scale water resources studies. However, due to IHMs' mathematical complexity and high computational cost, it is difficult to implement them in an iterative model evaluation process (e.g., Monte Carlo Simulation, simulation-optimization analysis, etc.), which diminishes their applicability for supporting decision-making in real-world situations. Our studies investigated how to effectively use complex IHMs to address real-world water issues via surrogate modeling. Three surrogate modeling approaches were considered, including 1) DYCORS (DYnamic COordinate search using Response Surface models), a well-established response surface-based optimization algorithm; 2) SOIM (Surrogate-based Optimization for Integrated surface water-groundwater Modeling), a response surface-based optimization algorithm that we developed specifically for IHMs; and 3) Probabilistic Collocation Method (PCM), a stochastic response surface approach. Our investigation was based on a modeling case study in the Heihe River Basin (HRB), China's second largest endorheic river basin. The GSFLOW (Coupled Ground-Water and Surface-Water Flow Model) model was employed. Two decision problems were discussed. One is to optimize, both in time and in space, the conjunctive use of surface water and groundwater for agricultural irrigation in the middle HRB region; and the other is to cost-effectively collect hydrological data based on a data-worth evaluation. Overall, our study results highlight the value of incorporating an IHM in making decisions of water resources management and hydrological data collection. An IHM like GSFLOW can provide great flexibility to formulating proper objective functions and constraints for various optimization problems. On the other hand, it has been demonstrated that surrogate modeling approaches can pave the path for such incorporation in real

Integrated water flow model and modflow-farm process: A comparison of theory, approaches, and features of two integrated hydrologic models

Science.gov (United States)

Dogrul, Emin C.; Schmid, Wolfgang; Hanson, Randall T.; Kadir, Tariq; Chung, Francis

2016-01-01

Effective modeling of conjunctive use of surface and subsurface water resources requires simulation of land use-based root zone and surface flow processes as well as groundwater flows, streamflows, and their interactions. Recently, two computer models developed for this purpose, the Integrated Water Flow Model (IWFM) from the California Department of Water Resources and the MODFLOW with Farm Process (MF-FMP) from the US Geological Survey, have been applied to complex basins such as the Central Valley of California. As both IWFM and MFFMP are publicly available for download and can be applied to other basins, there is a need to objectively compare the main approaches and features used in both models. This paper compares the concepts, as well as the method and simulation features of each hydrologic model pertaining to groundwater, surface water, and landscape processes. The comparison is focused on the integrated simulation of water demand and supply, water use, and the flow between coupled hydrologic processes. The differences in the capabilities and features of these two models could affect the outcome and types of water resource problems that can be simulated.

Modeling an integrated hospital management planning problem using integer optimization approach

Science.gov (United States)

Sitepu, Suryati; Mawengkang, Herman; Irvan

2017-09-01

Hospital is a very important institution to provide health care for people. It is not surprising that nowadays the people’s demands for hospital is increasing. However, due to the rising cost of healthcare services, hospitals need to consider efficiencies in order to overcome these two problems. This paper deals with an integrated strategy of staff capacity management and bed allocation planning to tackle these problems. Mathematically, the strategy can be modeled as an integer linear programming problem. We solve the model using a direct neighborhood search approach, based on the notion of superbasic variables.

Integrative modelling approaches for analysis of impact of multifunctional agriculture: a review for France, Germany and The Netherlands

NARCIS (Netherlands)

Rossing, W.A.H.; Zander, P.; Josien, E.; Groot, J.C.J.; Meyer, B.C.; Knierim, A.

2007-01-01

This paper reviews integrative modelling approaches which were developed to analyze the impact of multifunctional agriculture, or which may be used as such. The approaches are integrative in combining multiple goals of agriculture, and confronting these with current or potential performance of

Modeling and analysis of a decentralized electricity market: An integrated simulation/optimization approach

International Nuclear Information System (INIS)

Sarıca, Kemal; Kumbaroğlu, Gürkan; Or, Ilhan

2012-01-01

In this study, a model is developed to investigate the implications of an hourly day-ahead competitive power market on generator profits, electricity prices, availability and supply security. An integrated simulation/optimization approach is employed integrating a multi-agent simulation model with two alternative optimization models. The simulation model represents interactions between power generator, system operator, power user and power transmitter agents while the network flow optimization model oversees and optimizes the electricity flows, dispatches generators based on two alternative approaches used in the modeling of the underlying transmission network: a linear minimum cost network flow model and a non-linear alternating current optimal power flow model. Supply, demand, transmission, capacity and other technological constraints are thereby enforced. The transmission network, on which the scenario analyses are carried out, includes 30 bus, 41 lines, 9 generators, and 21 power users. The scenarios examined in the analysis cover various settings of transmission line capacities/fees, and hourly learning algorithms. Results provide insight into key behavioral and structural aspects of a decentralized electricity market under network constraints and reveal the importance of using an AC network instead of a simplified linear network flow approach. -- Highlights: ► An agent-based simulation model with an AC transmission environment with a day-ahead market. ► Physical network parameters have dramatic effects over price levels and stability. ► Due to AC nature of transmission network, adaptive agents have more local market power than minimal cost network flow. ► Behavior of the generators has significant effect over market price formation, as pointed out by bidding strategies. ► Transmission line capacity and fee policies are found to be very effective in price formation in the market.

Model of the Russian Federation Construction Innovation System: An Integrated Participatory Systems Approach

Directory of Open Access Journals (Sweden)

Emiliya Suprun

2016-08-01

Full Text Available This research integrates systemic and participatory techniques to model the Russian Federation construction innovation system. Understanding this complex construction innovation system and determining the best levers for enhancing it require the dynamic modelling of a number of factors, such as flows of resources and activities, policies, uncertainty and time. To build the foundations for such a dynamic model, the employed study method utilised an integrated stakeholder-based participatory approach coupled with structural analysis (MICMAC—Matrice d'Impacts Croisés Multiplication Appliquée à un Classement Cross-Impact Matrix. This method identified the key factors of the Russian Federation construction innovation system, their causal relationship (i.e., influence/dependence map and, ultimately, a causal loop diagram. The generated model reveals pathways to improving construction innovation in the Russian Federation and underpins the future development of an operationalised system dynamics model.

A novel integrated renewable energy system modelling approach, allowing fast FPGA controller prototyping

DEFF Research Database (Denmark)

Teodorescu, Remus; Ruiz, Alberto Parera; Cirstea, Marcian

2008-01-01

The paper describes a new holistic approach to the modeling of integrated renewable energy systems. The method is using the DK5 modeling/design environment from Celoxica and is based on the new Handel-C programming language. The goal of the work carried out was to achieve a combined model...... containing a Xilinx Spartan II FPGA and was successfully experimentally tested. This approach enables the design and fast hardware implementation of efficient controllers for Distributed Energy Resource (DER) hybrid systems....... of a photovoltaic energy system and a wind power system, which would allow an optimized holistic digital control system design, followed by rapid prototyping of the controller into a single Field Programmable Gate Array (FPGA). Initially, the system was simulated using Matlab / Simulink, to create a reference...

Statistical inference an integrated Bayesianlikelihood approach

CERN Document Server

Aitkin, Murray

2010-01-01

Filling a gap in current Bayesian theory, Statistical Inference: An Integrated Bayesian/Likelihood Approach presents a unified Bayesian treatment of parameter inference and model comparisons that can be used with simple diffuse prior specifications. This novel approach provides new solutions to difficult model comparison problems and offers direct Bayesian counterparts of frequentist t-tests and other standard statistical methods for hypothesis testing.After an overview of the competing theories of statistical inference, the book introduces the Bayes/likelihood approach used throughout. It pre

An integrated view of complex landscapes: a big data-model integration approach to trans-disciplinary science

Science.gov (United States)

The Earth is a complex system comprised of many interacting spatial and temporal scales. Understanding, predicting, and managing for these dynamics requires a trans-disciplinary integrated approach. Although there have been calls for this integration, a general approach is needed. We developed a Tra...

Social Network Analysis and Nutritional Behavior: An Integrated Modeling Approach.

Science.gov (United States)

Senior, Alistair M; Lihoreau, Mathieu; Buhl, Jerome; Raubenheimer, David; Simpson, Stephen J

2016-01-01

Animals have evolved complex foraging strategies to obtain a nutritionally balanced diet and associated fitness benefits. Recent research combining state-space models of nutritional geometry with agent-based models (ABMs), show how nutrient targeted foraging behavior can also influence animal social interactions, ultimately affecting collective dynamics and group structures. Here we demonstrate how social network analyses can be integrated into such a modeling framework and provide a practical analytical tool to compare experimental results with theory. We illustrate our approach by examining the case of nutritionally mediated dominance hierarchies. First we show how nutritionally explicit ABMs that simulate the emergence of dominance hierarchies can be used to generate social networks. Importantly the structural properties of our simulated networks bear similarities to dominance networks of real animals (where conflicts are not always directly related to nutrition). Finally, we demonstrate how metrics from social network analyses can be used to predict the fitness of agents in these simulated competitive environments. Our results highlight the potential importance of nutritional mechanisms in shaping dominance interactions in a wide range of social and ecological contexts. Nutrition likely influences social interactions in many species, and yet a theoretical framework for exploring these effects is currently lacking. Combining social network analyses with computational models from nutritional ecology may bridge this divide, representing a pragmatic approach for generating theoretical predictions for nutritional experiments.

An Overview of Modeling Approaches Applied to Aggregation-Based Fleet Management and Integration of Plug-in Electric Vehicles †

DEFF Research Database (Denmark)

You, Shi; Hu, Junjie; Ziras, Charalampos

2016-01-01

The design and implementation of management policies for plug-in electric vehicles (PEVs) need to be supported by a holistic understanding of the functional processes, their complex interactions, and their response to various changes. Models developed to represent different functional processes...... and systems are seen as useful tools to support the related studies for different stakeholders in a tangible way. This paper presents an overview of modeling approaches applied to support aggregation-based management and integration of PEVs from the perspective of fleet operators and grid operators......, respectively. We start by explaining a structured modeling approach, i.e., a flexible combination of process models and system models, applied to different management and integration studies. A state-of-the-art overview of modeling approaches applied to represent several key processes, such as charging...

A Key Event Path Analysis Approach for Integrated Systems

Directory of Open Access Journals (Sweden)

Jingjing Liao

2012-01-01

Full Text Available By studying the key event paths of probabilistic event structure graphs (PESGs, a key event path analysis approach for integrated system models is proposed. According to translation rules concluded from integrated system architecture descriptions, the corresponding PESGs are constructed from the colored Petri Net (CPN models. Then the definitions of cycle event paths, sequence event paths, and key event paths are given. Whereafter based on the statistic results after the simulation of CPN models, key event paths are found out by the sensitive analysis approach. This approach focuses on the logic structures of CPN models, which is reliable and could be the basis of structured analysis for discrete event systems. An example of radar model is given to characterize the application of this approach, and the results are worthy of trust.

Bending of Euler-Bernoulli nanobeams based on the strain-driven and stress-driven nonlocal integral models: a numerical approach

Science.gov (United States)

Oskouie, M. Faraji; Ansari, R.; Rouhi, H.

2018-04-01

Eringen's nonlocal elasticity theory is extensively employed for the analysis of nanostructures because it is able to capture nanoscale effects. Previous studies have revealed that using the differential form of the strain-driven version of this theory leads to paradoxical results in some cases, such as bending analysis of cantilevers, and recourse must be made to the integral version. In this article, a novel numerical approach is developed for the bending analysis of Euler-Bernoulli nanobeams in the context of strain- and stress-driven integral nonlocal models. This numerical approach is proposed for the direct solution to bypass the difficulties related to converting the integral governing equation into a differential equation. First, the governing equation is derived based on both strain-driven and stress-driven nonlocal models by means of the minimum total potential energy. Also, in each case, the governing equation is obtained in both strong and weak forms. To solve numerically the derived equations, matrix differential and integral operators are constructed based upon the finite difference technique and trapezoidal integration rule. It is shown that the proposed numerical approach can be efficiently applied to the strain-driven nonlocal model with the aim of resolving the mentioned paradoxes. Also, it is able to solve the problem based on the strain-driven model without inconsistencies of the application of this model that are reported in the literature.

An integrated approach to model strain localization bands in magnesium alloys

Science.gov (United States)

Baxevanakis, K. P.; Mo, C.; Cabal, M.; Kontsos, A.

2018-02-01

Strain localization bands (SLBs) that appear at early stages of deformation of magnesium alloys have been recently associated with heterogeneous activation of deformation twinning. Experimental evidence has demonstrated that such "Lüders-type" band formations dominate the overall mechanical behavior of these alloys resulting in sigmoidal type stress-strain curves with a distinct plateau followed by pronounced anisotropic hardening. To evaluate the role of SLB formation on the local and global mechanical behavior of magnesium alloys, an integrated experimental/computational approach is presented. The computational part is developed based on custom subroutines implemented in a finite element method that combine a plasticity model with a stiffness degradation approach. Specific inputs from the characterization and testing measurements to the computational approach are discussed while the numerical results are validated against such available experimental information, confirming the existence of load drops and the intensification of strain accumulation at the time of SLB initiation.

Spatial Analytic Hierarchy Process Model for Flood Forecasting: An Integrated Approach

International Nuclear Information System (INIS)

Matori, Abd Nasir; Yusof, Khamaruzaman Wan; Hashim, Mustafa Ahmad; Lawal, Dano Umar; Balogun, Abdul-Lateef

2014-01-01

Various flood influencing factors such as rainfall, geology, slope gradient, land use, soil type, drainage density, temperature etc. are generally considered for flood hazard assessment. However, lack of appropriate handling/integration of data from different sources is a challenge that can make any spatial forecasting difficult and inaccurate. Availability of accurate flood maps and thorough understanding of the subsurface conditions can adequately enhance flood disasters management. This study presents an approach that attempts to provide a solution to this drawback by combining Geographic Information System (GIS)-based Analytic Hierarchy Process (AHP) model as spatial forecasting tools. In achieving the set objectives, spatial forecasting of flood susceptible zones in the study area was made. A total number of five set of criteria/factors believed to be influencing flood generation in the study area were selected. Priority weights were assigned to each criterion/factor based on Saaty's nine point scale of preference and weights were further normalized through the AHP. The model was integrated into a GIS system in order to produce a flood forecasting map

Integrating models with data in ecology and palaeoecology: advances towards a model-data fusion approach.

Science.gov (United States)

Peng, Changhui; Guiot, Joel; Wu, Haibin; Jiang, Hong; Luo, Yiqi

2011-05-01

It is increasingly being recognized that global ecological research requires novel methods and strategies in which to combine process-based ecological models and data in cohesive, systematic ways. Model-data fusion (MDF) is an emerging area of research in ecology and palaeoecology. It provides a new quantitative approach that offers a high level of empirical constraint over model predictions based on observations using inverse modelling and data assimilation (DA) techniques. Increasing demands to integrate model and data methods in the past decade has led to MDF utilization in palaeoecology, ecology and earth system sciences. This paper reviews key features and principles of MDF and highlights different approaches with regards to DA. After providing a critical evaluation of the numerous benefits of MDF and its current applications in palaeoecology (i.e., palaeoclimatic reconstruction, palaeovegetation and palaeocarbon storage) and ecology (i.e. parameter and uncertainty estimation, model error identification, remote sensing and ecological forecasting), the paper discusses method limitations, current challenges and future research direction. In the ongoing data-rich era of today's world, MDF could become an important diagnostic and prognostic tool in which to improve our understanding of ecological processes while testing ecological theory and hypotheses and forecasting changes in ecosystem structure, function and services. © 2011 Blackwell Publishing Ltd/CNRS.

Model integration and the economics of nuclear power

International Nuclear Information System (INIS)

Lundgren, S.

1985-01-01

The author proposes and applies a specific approach to model integration, i.e. the merger of two or several independently developed models. The approach is intended for integrations of activity analysis sector models and applied general equilibrium models. Model integration makes it possible to extend the range of applicability of applied general equilibrium models by exploiting the information contained in sector models. It also makes it possible to evaluate the validity of the partial equilibrium analyses in which sector models often are employed. The proposed approach is used to integrate a sector model of electricity and heat production with a general equilibrium model of the Swedish economy. Both models have been constructed within the research programme. The author uses the integrated model to look at two issues concerning the role of nuclear power on the Swedish electricity market: What are the likely consequences of a nuclear power discontinuation and how does the nuclear power investment programme of the 1970's and the early 1980's compare with a socially efficient one. (Author)

A Hydro-Economic Approach to Representing Water Resources Impacts in Integrated Assessment Models

Energy Technology Data Exchange (ETDEWEB)

Kirshen, Paul H.; Strzepek, Kenneth, M.

2004-01-14

Grant Number DE-FG02-98ER62665 Office of Energy Research of the U.S. Department of Energy Abstract Many Integrated Assessment Models (IAM) divide the world into a small number of highly aggregated regions. Non-OECD countries are aggregated geographically into continental and multiple-continental regions or economically by development level. Current research suggests that these large scale aggregations cannot accurately represent potential water resources-related climate change impacts. In addition, IAMs do not explicitly model the flow regulation impacts of reservoir and ground water systems, the economics of water supply, or the demand for water in economic activities. Using the International Model for Policy Analysis of Agricultural Commodities and Trade (IMPACT) model of the International Food Policy Research Institute (IFPRI) as a case study, this research implemented a set of methodologies to provide accurate representation of water resource climate change impacts in Integrated Assessment Models. There were also detailed examinations of key issues related to aggregated modeling including: modeling water consumption versus water withdrawals; ground and surface water interactions; development of reservoir cost curves; modeling of surface areas of aggregated reservoirs for estimating evaporation losses; and evaluating the importance of spatial scale in river basin modeling. The major findings include: - Continental or national or even large scale river basin aggregation of water supplies and demands do not accurately capture the impacts of climate change in the water and agricultural sector in IAMs. - Fortunately, there now exist gridden approaches (0.5 X 0.5 degrees) to model streamflows in a global analysis. The gridded approach to hydrologic modeling allows flexibility in aligning basin boundaries with national boundaries. This combined with GIS tools, high speed computers, and the growing availability of socio-economic gridded data bases allows assignment of

An Overview of Modeling Approaches Applied to Aggregation-Based Fleet Management and Integration of Plug-in Electric Vehicles †

Directory of Open Access Journals (Sweden)

Shi You

2016-11-01

Full Text Available The design and implementation of management policies for plug-in electric vehicles (PEVs need to be supported by a holistic understanding of the functional processes, their complex interactions, and their response to various changes. Models developed to represent different functional processes and systems are seen as useful tools to support the related studies for different stakeholders in a tangible way. This paper presents an overview of modeling approaches applied to support aggregation-based management and integration of PEVs from the perspective of fleet operators and grid operators, respectively. We start by explaining a structured modeling approach, i.e., a flexible combination of process models and system models, applied to different management and integration studies. A state-of-the-art overview of modeling approaches applied to represent several key processes, such as charging management, and key systems, such as the PEV fleet, is then presented, along with a detailed description of different approaches. Finally, we discuss several considerations that need to be well understood during the modeling process in order to assist modelers and model users in the appropriate decisions of using existing, or developing their own, solutions for further applications.

Integration models: multicultural and liberal approaches confronted

Science.gov (United States)

Janicki, Wojciech

2012-01-01

European societies have been shaped by their Christian past, upsurge of international migration, democratic rule and liberal tradition rooted in religious tolerance. Boosting globalization processes impose new challenges on European societies, striving to protect their diversity. This struggle is especially clearly visible in case of minorities trying to resist melting into mainstream culture. European countries' legal systems and cultural policies respond to these efforts in many ways. Respecting identity politics-driven group rights seems to be the most common approach, resulting in creation of a multicultural society. However, the outcome of respecting group rights may be remarkably contradictory to both individual rights growing out from liberal tradition, and to reinforced concept of integration of immigrants into host societies. The hereby paper discusses identity politics upturn in the context of both individual rights and integration of European societies.

Prospective and participatory integrated assessment of agricultural systems from farm to regional scales: Comparison of three modeling approaches.

Science.gov (United States)

Delmotte, Sylvestre; Lopez-Ridaura, Santiago; Barbier, Jean-Marc; Wery, Jacques

2013-11-15

Evaluating the impacts of the development of alternative agricultural systems, such as organic or low-input cropping systems, in the context of an agricultural region requires the use of specific tools and methodologies. They should allow a prospective (using scenarios), multi-scale (taking into account the field, farm and regional level), integrated (notably multicriteria) and participatory assessment, abbreviated PIAAS (for Participatory Integrated Assessment of Agricultural System). In this paper, we compare the possible contribution to PIAAS of three modeling approaches i.e. Bio-Economic Modeling (BEM), Agent-Based Modeling (ABM) and statistical Land-Use/Land Cover Change (LUCC) models. After a presentation of each approach, we analyze their advantages and drawbacks, and identify their possible complementarities for PIAAS. Statistical LUCC modeling is a suitable approach for multi-scale analysis of past changes and can be used to start discussion about the futures with stakeholders. BEM and ABM approaches have complementary features for scenarios assessment at different scales. While ABM has been widely used for participatory assessment, BEM has been rarely used satisfactorily in a participatory manner. On the basis of these results, we propose to combine these three approaches in a framework targeted to PIAAS. Copyright © 2013 Elsevier Ltd. All rights reserved.

Business and technology integrated model

OpenAIRE

Noce, Irapuan; Carvalho, João Álvaro

2011-01-01

There is a growing interest in business modeling and architecture in the areas of management and information systems. One of the issues in the area is the lack of integration between the modeling techniques that are employed to support business development and those used for technology modeling. This paper proposes a modeling approach that is capable of integrating the modeling of the business and of the technology. By depicting the business model, the organization structure and the technolog...

Towards an integrated approach to modelling the risks and impacts of invasive forest species

Science.gov (United States)

Denys Yemshanov; Daniel McKenney; John Pedlar; Frank Koch; David Cook

2009-01-01

In this paper we provide an overview of an integrated approach to modelling the risks and impacts associated with non-indigenous forest pest species. This is a broad and important topic given the scale of ecological and economic consequences associated with non-indigenous species in north america and elsewhere. Assessments of risk and impacts remain difficult due to...

Science based integrated approach to advanced nuclear fuel development - vision, approach, and overview

Energy Technology Data Exchange (ETDEWEB)

Unal, Cetin [Los Alamos National Laboratory; Pasamehmetoglu, Kemal [IDAHO NATIONAL LAB; Carmack, Jon [IDAHO NATIONAL LAB

2010-01-01

Advancing the performance of Light Water Reactors, Advanced Nuclear Fuel Cycles, and Advanced Rcactors, such as the Next Generation Nuclear Power Plants, requires enhancing our fundamental understanding of fuel and materials behavior under irradiation. The capability to accurately model the nuclear fuel systems is critical. In order to understand specific aspects of the nuclear fuel, fully coupled fuel simulation codes are required to achieve licensing of specific nuclear fuel designs for operation. The backbone of these codes, models, and simulations is a fundamental understanding and predictive capability for simulating the phase and microstructural behavior of the nuclear fuel system materials and matrices. The purpose of this paper is to identify the modeling and simulation approach in order to deliver predictive tools for advanced fuels development. The coordination between experimental nuclear fuel design, development technical experts, and computational fuel modeling and simulation technical experts is a critical aspect of the approach and naturally leads to an integrated, goal-oriented science-based R & D approach and strengthens both the experimental and computational efforts. The Advanced Fuels Campaign (AFC) and Nuclear Energy Advanced Modeling and Simulation (NEAMS) Fuels Integrated Performance and Safety Code (IPSC) are working together to determine experimental data and modeling needs. The primary objective of the NEAMS fuels IPSC project is to deliver a coupled, three-dimensional, predictive computational platform for modeling the fabrication and both normal and abnormal operation of nuclear fuel pins and assemblies, applicable to both existing and future reactor fuel designs. The science based program is pursuing the development of an integrated multi-scale and multi-physics modeling and simulation platform for nuclear fuels. This overview paper discusses the vision, goals and approaches how to develop and implement the new approach.

Science based integrated approach to advanced nuclear fuel development - vision, approach, and overview

International Nuclear Information System (INIS)

Unal, Cetin; Pasamehmetoglu, Kemal; Carmack, Jon

2010-01-01

Advancing the performance of Light Water Reactors, Advanced Nuclear Fuel Cycles, and Advanced Rcactors, such as the Next Generation Nuclear Power Plants, requires enhancing our fundamental understanding of fuel and materials behavior under irradiation. The capability to accurately model the nuclear fuel systems is critical. In order to understand specific aspects of the nuclear fuel, fully coupled fuel simulation codes are required to achieve licensing of specific nuclear fuel designs for operation. The backbone of these codes, models, and simulations is a fundamental understanding and predictive capability for simulating the phase and microstructural behavior of the nuclear fuel system materials and matrices. The purpose of this paper is to identify the modeling and simulation approach in order to deliver predictive tools for advanced fuels development. The coordination between experimental nuclear fuel design, development technical experts, and computational fuel modeling and simulation technical experts is a critical aspect of the approach and naturally leads to an integrated, goal-oriented science-based R and D approach and strengthens both the experimental and computational efforts. The Advanced Fuels Campaign (AFC) and Nuclear Energy Advanced Modeling and Simulation (NEAMS) Fuels Integrated Performance and Safety Code (IPSC) are working together to determine experimental data and modeling needs. The primary objective of the NEAMS fuels IPSC project is to deliver a coupled, three-dimensional, predictive computational platform for modeling the fabrication and both normal and abnormal operation of nuclear fuel pins and assemblies, applicable to both existing and future reactor fuel designs. The science based program is pursuing the development of an integrated multi-scale and multi-physics modeling and simulation platform for nuclear fuels. This overview paper discusses the vision, goals and approaches how to develop and implement the new approach.

Optimizing water resources management in large river basins with integrated surface water-groundwater modeling: A surrogate-based approach

Science.gov (United States)

Wu, Bin; Zheng, Yi; Wu, Xin; Tian, Yong; Han, Feng; Liu, Jie; Zheng, Chunmiao

2015-04-01

Integrated surface water-groundwater modeling can provide a comprehensive and coherent understanding on basin-scale water cycle, but its high computational cost has impeded its application in real-world management. This study developed a new surrogate-based approach, SOIM (Surrogate-based Optimization for Integrated surface water-groundwater Modeling), to incorporate the integrated modeling into water management optimization. Its applicability and advantages were evaluated and validated through an optimization research on the conjunctive use of surface water (SW) and groundwater (GW) for irrigation in a semiarid region in northwest China. GSFLOW, an integrated SW-GW model developed by USGS, was employed. The study results show that, due to the strong and complicated SW-GW interactions, basin-scale water saving could be achieved by spatially optimizing the ratios of groundwater use in different irrigation districts. The water-saving potential essentially stems from the reduction of nonbeneficial evapotranspiration from the aqueduct system and shallow groundwater, and its magnitude largely depends on both water management schemes and hydrological conditions. Important implications for water resources management in general include: first, environmental flow regulation needs to take into account interannual variation of hydrological conditions, as well as spatial complexity of SW-GW interactions; and second, to resolve water use conflicts between upper stream and lower stream, a system approach is highly desired to reflect ecological, economic, and social concerns in water management decisions. Overall, this study highlights that surrogate-based approaches like SOIM represent a promising solution to filling the gap between complex environmental modeling and real-world management decision-making.

A Modelling Approach for Integrated Planning of Port Capacity- Trade-Offs in Rotterdam Investment Planning

Directory of Open Access Journals (Sweden)

Sander Dekker

2006-03-01

Full Text Available This paper presents a modelling approach for planning ofport capacity. The approach integrates port commercial andpublic interests. It further incorporates route competition andautonomous demand growth. It is applied to port expansion,which can be considered as a strategy for an individual port todeal with route competition. The basis for solving this planningproblem comprises an analysis of port demand and supply in apartial equilibrium model. With such an approach, the reactionof a single port on the change in a transport network comprisingalternative routes to a hinterland destination can be simulated.To establish the optimal expansion strategy, port expansion iscombined with congestion pricing. This is used for the simultaneousdetermination of 1 optimal expansion size, and 2 investmentrecovery period. The modelling approach will be appliedto Rotterdam port focusing on port expansion by means ofland reclamation. The scenmio of the entry of a new competingroute via the Italian port Gioia Tauro is used to address sometrade-offs in Rotterdam investment planning.

Integrating modelling and phenotyping approaches to identify and screen complex traits - Illustration for transpiration efficiency in cereals.

Science.gov (United States)

Chenu, K; van Oosterom, E J; McLean, G; Deifel, K S; Fletcher, A; Geetika, G; Tirfessa, A; Mace, E S; Jordan, D R; Sulman, R; Hammer, G L

2018-02-21

Following advances in genetics, genomics, and phenotyping, trait selection in breeding is limited by our ability to understand interactions within the plants and with their environments, and to target traits of most relevance for the target population of environments. We propose an integrated approach that combines insights from crop modelling, physiology, genetics, and breeding to identify traits valuable for yield gain in the target population of environments, develop relevant high-throughput phenotyping platforms, and identify genetic controls and their values in production environments. This paper uses transpiration efficiency (biomass produced per unit of water used) as an example of a complex trait of interest to illustrate how the approach can guide modelling, phenotyping, and selection in a breeding program. We believe that this approach, by integrating insights from diverse disciplines, can increase the resource use efficiency of breeding programs for improving yield gains in target populations of environments.

A refined regional modeling approach for the Corn Belt - Experiences and recommendations for large-scale integrated modeling

Science.gov (United States)

Panagopoulos, Yiannis; Gassman, Philip W.; Jha, Manoj K.; Kling, Catherine L.; Campbell, Todd; Srinivasan, Raghavan; White, Michael; Arnold, Jeffrey G.

2015-05-01

Nonpoint source pollution from agriculture is the main source of nitrogen and phosphorus in the stream systems of the Corn Belt region in the Midwestern US. This region is comprised of two large river basins, the intensely row-cropped Upper Mississippi River Basin (UMRB) and Ohio-Tennessee River Basin (OTRB), which are considered the key contributing areas for the Northern Gulf of Mexico hypoxic zone according to the US Environmental Protection Agency. Thus, in this area it is of utmost importance to ensure that intensive agriculture for food, feed and biofuel production can coexist with a healthy water environment. To address these objectives within a river basin management context, an integrated modeling system has been constructed with the hydrologic Soil and Water Assessment Tool (SWAT) model, capable of estimating river basin responses to alternative cropping and/or management strategies. To improve modeling performance compared to previous studies and provide a spatially detailed basis for scenario development, this SWAT Corn Belt application incorporates a greatly refined subwatershed structure based on 12-digit hydrologic units or 'subwatersheds' as defined by the US Geological Service. The model setup, calibration and validation are time-demanding and challenging tasks for these large systems, given the scale intensive data requirements, and the need to ensure the reliability of flow and pollutant load predictions at multiple locations. Thus, the objectives of this study are both to comprehensively describe this large-scale modeling approach, providing estimates of pollution and crop production in the region as well as to present strengths and weaknesses of integrated modeling at such a large scale along with how it can be improved on the basis of the current modeling structure and results. The predictions were based on a semi-automatic hydrologic calibration approach for large-scale and spatially detailed modeling studies, with the use of the Sequential

Toward integration of genomic selection with crop modelling: the development of an integrated approach to predicting rice heading dates.

Science.gov (United States)

Onogi, Akio; Watanabe, Maya; Mochizuki, Toshihiro; Hayashi, Takeshi; Nakagawa, Hiroshi; Hasegawa, Toshihiro; Iwata, Hiroyoshi

2016-04-01

It is suggested that accuracy in predicting plant phenotypes can be improved by integrating genomic prediction with crop modelling in a single hierarchical model. Accurate prediction of phenotypes is important for plant breeding and management. Although genomic prediction/selection aims to predict phenotypes on the basis of whole-genome marker information, it is often difficult to predict phenotypes of complex traits in diverse environments, because plant phenotypes are often influenced by genotype-environment interaction. A possible remedy is to integrate genomic prediction with crop/ecophysiological modelling, which enables us to predict plant phenotypes using environmental and management information. To this end, in the present study, we developed a novel method for integrating genomic prediction with phenological modelling of Asian rice (Oryza sativa, L.), allowing the heading date of untested genotypes in untested environments to be predicted. The method simultaneously infers the phenological model parameters and whole-genome marker effects on the parameters in a Bayesian framework. By cultivating backcross inbred lines of Koshihikari × Kasalath in nine environments, we evaluated the potential of the proposed method in comparison with conventional genomic prediction, phenological modelling, and two-step methods that applied genomic prediction to phenological model parameters inferred from Nelder-Mead or Markov chain Monte Carlo algorithms. In predicting heading dates of untested lines in untested environments, the proposed and two-step methods tended to provide more accurate predictions than the conventional genomic prediction methods, particularly in environments where phenotypes from environments similar to the target environment were unavailable for training genomic prediction. The proposed method showed greater accuracy in prediction than the two-step methods in all cross-validation schemes tested, suggesting the potential of the integrated approach in

Modeling energy-economy interactions using integrated models

International Nuclear Information System (INIS)

Uyterlinde, M.A.

1994-06-01

Integrated models are defined as economic energy models that consist of several submodels, either coupled by an interface module, or embedded in one large model. These models can be used for energy policy analysis. Using integrated models yields the following benefits. They provide a framework in which energy-economy interactions can be better analyzed than in stand-alone models. Integrated models can represent both energy sector technological details, as well as the behaviour of the market and the role of prices. Furthermore, the combination of modeling methodologies in one model can compensate weaknesses of one approach with strengths of another. These advantages motivated this survey of the class of integrated models. The purpose of this literature survey therefore was to collect and to present information on integrated models. To carry out this task, several goals were identified. The first goal was to give an overview of what is reported on these models in general. The second one was to find and describe examples of such models. Other goals were to find out what kinds of models were used as component models, and to examine the linkage methodology. Solution methods and their convergence properties were also a subject of interest. The report has the following structure. In chapter 2, a 'conceptual framework' is given. In chapter 3 a number of integrated models is described. In a table, a complete overview is presented of all described models. Finally, in chapter 4, the report is summarized, and conclusions are drawn regarding the advantages and drawbacks of integrated models. 8 figs., 29 refs

Student eXchange Process Modelling and Implementation by Using an Integrated BMP-SOA Approach

Directory of Open Access Journals (Sweden)

Octavian DOSPINESCU

2018-01-01

Full Text Available One of the key processes of an open University Information System concerns managing the student exchange activities. In this paper we will try to address the challenges regarding modelling and implementation when integrating such a process by crossing different information systems. Our approach will leverage SOA architecture by using BPM in order to structure and build the service orchestration level.

THE MODEL OF REALIZATION OF INTEGRATIVE APPROACH TO THE WORK WITH PEDAGOGICALLY GIFTED STUDENTS

Directory of Open Access Journals (Sweden)

Golubova Anna Vasilievna

2013-05-01

Full Text Available The article examines the components and criteria of pedagogical giftedness of students; the levels of formedness and pedagogical conditions of its development are identified. Purpose: to describe the model of realization of integrative approach to the work with pedagogically gifted students in educational space of university. Methodology: theoretical level methods of pedagogical phenomena learning, methods of empirical level (observation, interviewing, questionnaires, conversations, psychological tests etc.. The results of the research proved that phased realization of integrative approach to the work with pedagogically gifted students in educational space of university provides the rising of pedagogically giftedness formation level. The next pedagogical conditions of pedagogically giftedness formation are described: the creation of pedagogically-oriented creative environment; promotion of positive motivational setting for future professional and educational activities; attracting future teachers to the creative professional-oriented learning and cognitive activity. Practical implications: the educational process of higher pedagogical educational institutions.

Simulating mesoscale coastal evolution for decadal coastal management: A new framework integrating multiple, complementary modelling approaches

Science.gov (United States)

van Maanen, Barend; Nicholls, Robert J.; French, Jon R.; Barkwith, Andrew; Bonaldo, Davide; Burningham, Helene; Brad Murray, A.; Payo, Andres; Sutherland, James; Thornhill, Gillian; Townend, Ian H.; van der Wegen, Mick; Walkden, Mike J. A.

2016-03-01

Coastal and shoreline management increasingly needs to consider morphological change occurring at decadal to centennial timescales, especially that related to climate change and sea-level rise. This requires the development of morphological models operating at a mesoscale, defined by time and length scales of the order 101 to 102 years and 101 to 102 km. So-called 'reduced complexity' models that represent critical processes at scales not much smaller than the primary scale of interest, and are regulated by capturing the critical feedbacks that govern landform behaviour, are proving effective as a means of exploring emergent coastal behaviour at a landscape scale. Such models tend to be computationally efficient and are thus easily applied within a probabilistic framework. At the same time, reductionist models, built upon a more detailed description of hydrodynamic and sediment transport processes, are capable of application at increasingly broad spatial and temporal scales. More qualitative modelling approaches are also emerging that can guide the development and deployment of quantitative models, and these can be supplemented by varied data-driven modelling approaches that can achieve new explanatory insights from observational datasets. Such disparate approaches have hitherto been pursued largely in isolation by mutually exclusive modelling communities. Brought together, they have the potential to facilitate a step change in our ability to simulate the evolution of coastal morphology at scales that are most relevant to managing erosion and flood risk. Here, we advocate and outline a new integrated modelling framework that deploys coupled mesoscale reduced complexity models, reductionist coastal area models, data-driven approaches, and qualitative conceptual models. Integration of these heterogeneous approaches gives rise to model compositions that can potentially resolve decadal- to centennial-scale behaviour of diverse coupled open coast, estuary and inner

Understanding Gulf War Illness: An Integrative Modeling Approach

Science.gov (United States)

2017-10-01

using a novel mathematical model. The computational biology approach will enable the consortium to quickly identify targets of dysfunction and find... computer / mathematical paradigms for evaluation of treatment strategies 12-30 50% Develop pilot clinical trials on basis of animal studies 24-36 60...the goal of testing chemical treatments. The immune and autonomic biomarkers will be tested using a computational modeling approach allowing for a

Toward an Integrative Model of Global Business Strategy

DEFF Research Database (Denmark)

Li, Xin

fragmentation-integration-fragmentation-integration upward spiral. In response to the call for integrative approach to strategic management research, we propose an integrative model of global business strategy that aims at integrating not only strategy and IB but also the different paradigms within the strategy...... field. We also discuss the merit and limitation of our model....

Structured approaches to large-scale systems: Variational integrators for interconnected Lagrange-Dirac systems and structured model reduction on Lie groups

Science.gov (United States)

Parks, Helen Frances

This dissertation presents two projects related to the structured integration of large-scale mechanical systems. Structured integration uses the considerable differential geometric structure inherent in mechanical motion to inform the design of numerical integration schemes. This process improves the qualitative properties of simulations and becomes especially valuable as a measure of accuracy over long time simulations in which traditional Gronwall accuracy estimates lose their meaning. Often, structured integration schemes replicate continuous symmetries and their associated conservation laws at the discrete level. Such is the case for variational integrators, which discretely replicate the process of deriving equations of motion from variational principles. This results in the conservation of momenta associated to symmetries in the discrete system and conservation of a symplectic form when applicable. In the case of Lagrange-Dirac systems, variational integrators preserve a discrete analogue of the Dirac structure preserved in the continuous flow. In the first project of this thesis, we extend Dirac variational integrators to accommodate interconnected systems. We hope this work will find use in the fields of control, where a controlled system can be thought of as a "plant" system joined to its controller, and in the approach of very large systems, where modular modeling may prove easier than monolithically modeling the entire system. The second project of the thesis considers a different approach to large systems. Given a detailed model of the full system, can we reduce it to a more computationally efficient model without losing essential geometric structures in the system? Asked without the reference to structure, this is the essential question of the field of model reduction. The answer there has been a resounding yes, with Principal Orthogonal Decomposition (POD) with snapshots rising as one of the most successful methods. Our project builds on previous work

Integrated care: wellness-oriented peer approaches: a key ingredient for integrated care.

Science.gov (United States)

Swarbrick, Margaret A

2013-08-01

People with lived experience of mental illness have become leaders of an influential movement to help the mental health system embrace the notion of whole health and wellness in the areas of advocacy, policy, and care delivery. Wellness-oriented peer approaches delivered by peer-support whole-health specialists and wellness coaches can play an important role in integrated care models. This column examines the wellness definitions and peer models and some specific benefits and tensions between the peer-oriented wellness approach and the medical model. These models can work in unison to improve health and wellness among people with mental and substance use disorders.

TU-G-210-02: TRANS-FUSIMO - An Integrative Approach to Model-Based Treatment Planning of Liver FUS

Energy Technology Data Exchange (ETDEWEB)

Preusser, T. [Fraunhofer MEVIS & Jacobs University (Germany)

2015-06-15

Modeling can play a vital role in predicting, optimizing and analyzing the results of therapeutic ultrasound treatments. Simulating the propagating acoustic beam in various targeted regions of the body allows for the prediction of the resulting power deposition and temperature profiles. In this session we will apply various modeling approaches to breast, abdominal organ and brain treatments. Of particular interest is the effectiveness of procedures for correcting for phase aberrations caused by intervening irregular tissues, such as the skull in transcranial applications or inhomogeneous breast tissues. Also described are methods to compensate for motion in targeted abdominal organs such as the liver or kidney. Douglas Christensen – Modeling for Breast and Brain HIFU Treatment Planning Tobias Preusser – TRANS-FUSIMO – An Integrative Approach to Model-Based Treatment Planning of Liver FUS Tobias Preusser – TRANS-FUSIMO – An Integrative Approach to Model-Based Treatment Planning of Liver FUS Learning Objectives: Understand the role of acoustic beam modeling for predicting the effectiveness of therapeutic ultrasound treatments. Apply acoustic modeling to specific breast, liver, kidney and transcranial anatomies. Determine how to obtain appropriate acoustic modeling parameters from clinical images. Understand the separate role of absorption and scattering in energy delivery to tissues. See how organ motion can be compensated for in ultrasound therapies. Compare simulated data with clinical temperature measurements in transcranial applications. Supported by NIH R01 HL172787 and R01 EB013433 (DC); EU Seventh Framework Programme (FP7/2007-2013) under 270186 (FUSIMO) and 611889 (TRANS-FUSIMO)(TP); and P01 CA159992, GE, FUSF and InSightec (UV)

TU-G-210-02: TRANS-FUSIMO - An Integrative Approach to Model-Based Treatment Planning of Liver FUS

International Nuclear Information System (INIS)

Preusser, T.

2015-01-01

Modeling can play a vital role in predicting, optimizing and analyzing the results of therapeutic ultrasound treatments. Simulating the propagating acoustic beam in various targeted regions of the body allows for the prediction of the resulting power deposition and temperature profiles. In this session we will apply various modeling approaches to breast, abdominal organ and brain treatments. Of particular interest is the effectiveness of procedures for correcting for phase aberrations caused by intervening irregular tissues, such as the skull in transcranial applications or inhomogeneous breast tissues. Also described are methods to compensate for motion in targeted abdominal organs such as the liver or kidney. Douglas Christensen – Modeling for Breast and Brain HIFU Treatment Planning Tobias Preusser – TRANS-FUSIMO – An Integrative Approach to Model-Based Treatment Planning of Liver FUS Tobias Preusser – TRANS-FUSIMO – An Integrative Approach to Model-Based Treatment Planning of Liver FUS Learning Objectives: Understand the role of acoustic beam modeling for predicting the effectiveness of therapeutic ultrasound treatments. Apply acoustic modeling to specific breast, liver, kidney and transcranial anatomies. Determine how to obtain appropriate acoustic modeling parameters from clinical images. Understand the separate role of absorption and scattering in energy delivery to tissues. See how organ motion can be compensated for in ultrasound therapies. Compare simulated data with clinical temperature measurements in transcranial applications. Supported by NIH R01 HL172787 and R01 EB013433 (DC); EU Seventh Framework Programme (FP7/2007-2013) under 270186 (FUSIMO) and 611889 (TRANS-FUSIMO)(TP); and P01 CA159992, GE, FUSF and InSightec (UV)

The Saale-Project -A multidisciplinary approach towards sustainable integrative catchment management -

Science.gov (United States)

Bongartz, K.; Flügel, W. A.

2003-04-01

In the joint research project “Development of an integrated methodology for the sustainable management of river basins The Saale River Basin example”, coordinated by the Centre of Environmental Research (UFZ), concepts and tools for an integrated management of large river basins are developed and applied for the Saale river basin. The ultimate objective of the project is to contribute to the holistic assessment and benchmarking approaches in water resource planning, as required by the European Water Framework Directive. The study presented here deals (1) with the development of a river basin information and modelling system, (2) with the refinement of a regionalisation approach adapted for integrated basin modelling. The approach combines a user friendly basin disaggregation method preserving the catchment’s physiographic heterogeneity with a process oriented hydrological basin assessment for scale bridging integrated modelling. The well tested regional distribution concept of Response Units (RUs) will be enhanced by landscape metrics and decision support tools for objective, scale independent and problem oriented RU delineation to provide the spatial modelling entities for process oriented and distributed simulation of vertical and lateral hydrological transport processes. On basis of this RUs suitable hydrological modelling approaches will be further developed with strong respect to a more detailed simulation of the lateral surface and subsurface flows as well as the channel flow. This methodical enhancement of the well recognised RU-concept will be applied to the river basin of the Saale (Ac: 23 179 km2) and validated by a nested catchment approach, which allows multi-response-validation and estimation of uncertainties of the modelling results. Integrated modelling of such a complex basin strongly influenced by manifold human activities (reservoirs, agriculture, urban areas and industry) can only be achieved by coupling the various modelling approaches

Modeling of Electromagnetic Fields in Parallel-Plane Structures: A Unified Contour-Integral Approach

Directory of Open Access Journals (Sweden)

M. Stumpf

2017-04-01

Full Text Available A unified reciprocity-based modeling approach for analyzing electromagnetic fields in dispersive parallel-plane structures of arbitrary shape is described. It is shown that the use of the reciprocity theorem of the time-convolution type leads to a global contour-integral interaction quantity from which novel both time- and frequency-domain numerical schemes can be arrived at. Applications of the numerical method concerning the time-domain radiated interference and susceptibility of parallel-plane structures are discussed and illustrated on numerical examples.

Modeling integrated biomass gasification business concepts

Science.gov (United States)

Peter J. Ince; Ted Bilek; Mark A. Dietenberger

2011-01-01

Biomass gasification is an approach to producing energy and/or biofuels that could be integrated into existing forest product production facilities, particularly at pulp mills. Existing process heat and power loads tend to favor integration at existing pulp mills. This paper describes a generic modeling system for evaluating integrated biomass gasification business...

Non-integrable quantum field theories as perturbations of certain integrable models

International Nuclear Information System (INIS)

Delfino, G.; Simonetti, P.

1996-03-01

We approach the study of non-integrable models of two-dimensional quantum field theory as perturbations of the integrable ones. By exploiting the knowledge of the exact S-matrix and Form Factors of the integrable field theories we obtain the first order corrections to the mass ratios, the vacuum energy density and the S-matrix of the non-integrable theories. As interesting applications of the formalism, we study the scaling region of the Ising model in an external magnetic field at T ∼ T c and the scaling region around the minimal model M 2 , τ . For these models, a remarkable agreement is observed between the theoretical predictions and the data extracted by a numerical diagonalization of their Hamiltonian. (author). 41 refs, 9 figs, 1 tab

An Integrated Modelling and Toolpathing Approach for a Frameless Stressed Skin Structure, Fabricated Using Robotic Incremental Sheet Forming

DEFF Research Database (Denmark)

Nicholas, Paul; Stasiuk, David; Nørgaard, Esben Clausen

2016-01-01

with performance implications at material, element and structural scales. This paper briefly presents ISF as a method of fabrication, and introduces the context of structures where the skin plays an integral role. It describes the development of an integrated approach for the modelling and fabrication of Stressed...... Skins, an incrementally formed sheet metal structure. The paper then focus upon the use of prototypes and empirical testing as means to inform digital models about fabrication and material parameters including: material forming limits and thinning; the parameterisation of macro and meso simulations...

Characterisation of large catastrophic landslides using an integrated field, remote sensing and numerical modelling approach

OpenAIRE

Wolter, Andrea Elaine

2014-01-01

I apply a forensic, multidisciplinary approach that integrates engineering geology field investigations, engineering geomorphology mapping, long-range terrestrial photogrammetry, and a numerical modelling toolbox to two large rock slope failures to study their causes, initiation, kinematics, and dynamics. I demonstrate the significance of endogenic and exogenic processes, both separately and in concert, in contributing to landscape evolution and conditioning slopes for failure, and use geomor...

Integrated Approach to User Account Management

Science.gov (United States)

Kesselman, Glenn; Smith, William

2007-01-01

IT environments consist of both Windows and other platforms. Providing user account management for this model has become increasingly diffi cult. If Microsoft#s Active Directory could be enhanced to extend a W indows identity for authentication services for Unix, Linux, Java and Macintosh systems, then an integrated approach to user account manag ement could be realized.

Vertically Integrated Models for Carbon Storage Modeling in Heterogeneous Domains

Science.gov (United States)

Bandilla, K.; Celia, M. A.

2017-12-01

Numerical modeling is an essential tool for studying the impacts of geologic carbon storage (GCS). Injection of carbon dioxide (CO2) into deep saline aquifers leads to multi-phase flow (injected CO2 and resident brine), which can be described by a set of three-dimensional governing equations, including mass-balance equation, volumetric flux equations (modified Darcy), and constitutive equations. This is the modeling approach on which commonly used reservoir simulators such as TOUGH2 are based. Due to the large density difference between CO2 and brine, GCS models can often be simplified by assuming buoyant segregation and integrating the three-dimensional governing equations in the vertical direction. The integration leads to a set of two-dimensional equations coupled with reconstruction operators for vertical profiles of saturation and pressure. Vertically-integrated approaches have been shown to give results of comparable quality as three-dimensional reservoir simulators when applied to realistic CO2 injection sites such as the upper sand wedge at the Sleipner site. However, vertically-integrated approaches usually rely on homogeneous properties over the thickness of a geologic layer. Here, we investigate the impact of general (vertical and horizontal) heterogeneity in intrinsic permeability, relative permeability functions, and capillary pressure functions. We consider formations involving complex fluvial deposition environments and compare the performance of vertically-integrated models to full three-dimensional models for a set of hypothetical test cases consisting of high permeability channels (streams) embedded in a low permeability background (floodplains). The domains are randomly generated assuming that stream channels can be represented by sinusoidal waves in the plan-view and by parabolas for the streams' cross-sections. Stream parameters such as width, thickness and wavelength are based on values found at the Ketzin site in Germany. Results from the

A generic, time-resolved, integrated digital image correlation, identification approach

NARCIS (Netherlands)

Hoefnagels, J.P.M.; Neggers, J.; Blaysat, Benoît; Hild, François; Geers, M.G.D.; Jin, H.; Sciammarella, C.; Yoshida, S.; Lamberti, L.

2015-01-01

A generic one-step Integrated Digital Image Correlation (I-DIC) inverse parameter identification approach is introduced that enables direct identification of constitutive model parameters by intimately integrating a Finite Elements Method (FEM) with Digital Image Correlation (DIC), directly

Integrated assessment of the global warming problem. A decision-analytical approach

International Nuclear Information System (INIS)

Van Lenthe, J.; Hendrickx, L.; Vlek, C.A.J.

1995-01-01

The project on the title subject aims at developing a policy-oriented methodology for the integrated assessment of the global warming problem. Decision analysis in general and influence diagrams in particular appear to constitute an appropriate integrated assessment methodology. The influence-diagram approach is illustrated at a preliminary integrated modeling of the global warming problem. In next stages of the research, attention will be shifted from the methodology of integrated assessment to the contents of integrated models. 4 figs., 5 refs

Addressing uncertainties in the ERICA Integrated Approach

International Nuclear Information System (INIS)

Oughton, D.H.; Agueero, A.; Avila, R.; Brown, J.E.; Copplestone, D.; Gilek, M.

2008-01-01

Like any complex environmental problem, ecological risk assessment of the impacts of ionising radiation is confounded by uncertainty. At all stages, from problem formulation through to risk characterisation, the assessment is dependent on models, scenarios, assumptions and extrapolations. These include technical uncertainties related to the data used, conceptual uncertainties associated with models and scenarios, as well as social uncertainties such as economic impacts, the interpretation of legislation, and the acceptability of the assessment results to stakeholders. The ERICA Integrated Approach has been developed to allow an assessment of the risks of ionising radiation, and includes a number of methods that are intended to make the uncertainties and assumptions inherent in the assessment more transparent to users and stakeholders. Throughout its development, ERICA has recommended that assessors deal openly with the deeper dimensions of uncertainty and acknowledge that uncertainty is intrinsic to complex systems. Since the tool is based on a tiered approach, the approaches to dealing with uncertainty vary between the tiers, ranging from a simple, but highly conservative screening to a full probabilistic risk assessment including sensitivity analysis. This paper gives on overview of types of uncertainty that are manifest in ecological risk assessment and the ERICA Integrated Approach to dealing with some of these uncertainties

The bottom-up approach to integrative validity: a new perspective for program evaluation.

Science.gov (United States)

Chen, Huey T

2010-08-01

The Campbellian validity model and the traditional top-down approach to validity have had a profound influence on research and evaluation. That model includes the concepts of internal and external validity and within that model, the preeminence of internal validity as demonstrated in the top-down approach. Evaluators and researchers have, however, increasingly recognized that in an evaluation, the over-emphasis on internal validity reduces that evaluation's usefulness and contributes to the gulf between academic and practical communities regarding interventions. This article examines the limitations of the Campbellian validity model and the top-down approach and provides a comprehensive, alternative model, known as the integrative validity model for program evaluation. The integrative validity model includes the concept of viable validity, which is predicated on a bottom-up approach to validity. This approach better reflects stakeholders' evaluation views and concerns, makes external validity workable, and becomes therefore a preferable alternative for evaluation of health promotion/social betterment programs. The integrative validity model and the bottom-up approach enable evaluators to meet scientific and practical requirements, facilitate in advancing external validity, and gain a new perspective on methods. The new perspective also furnishes a balanced view of credible evidence, and offers an alternative perspective for funding. Copyright (c) 2009 Elsevier Ltd. All rights reserved.

Integrating Seasonal Oscillations into Basel II Behavioural Scoring Models

Directory of Open Access Journals (Sweden)

Goran Klepac

2007-09-01

Full Text Available The article introduces a new methodology of temporal influence measurement (seasonal oscillations, temporal patterns for behavioural scoring development purposes. The paper shows how significant temporal variables can be recognised and then integrated into the behavioural scoring models in order to improve model performance. Behavioural scoring models are integral parts of the Basel II standard on Internal Ratings-Based Approaches (IRB. The IRB approach much more precisely reflects individual risk bank profile.A solution of the problem of how to analyze and integrate macroeconomic and microeconomic factors represented in time series into behavioural scorecard models will be shown in the paper by using the REF II model.

Performance improvement integration: a whole systems approach.

Science.gov (United States)

Page, C K

1999-02-01

Performance improvement integration in health care organizations is a challenge for health care leaders. Required for accreditation by the Joint Commission on Accreditation of Healthcare Organizations (Joint Commission), performance improvement (PI) can be designed as a sustainable model for performance to survive in a turbulent period. Central Baptist Hospital developed a model for PI that focused on strategy established by the leadership team, delineated responsibility through the organizational structure of shared governance, and accountability for outcomes evidenced through the organization's profitability. Such an approach integrated into the culture of the organization can produce positive financial margins, positive customer satisfaction, and commendations from the Joint Commission.

Integrated assessment of the global warming problem: A decision-analytical approach

International Nuclear Information System (INIS)

Van Lenthe, J.; Hendrickx, L.; Vlek, C.A.J.

1994-12-01

The multi-disciplinary character of the global warming problem asks for an integrated assessment approach for ordering and combining the various physical, ecological, economical, and sociological results. The Netherlands initiated their own National Research Program (NRP) on Global Air Pollution and Climate Change (NRP). The first phase (NRP-1) identified the integration theme as one of five central research themes. The second phase (NRP-2) shows a growing concern for integrated assessment issues. The current two-year research project 'Characterizing the risks: a comparative analysis of the risks of global warming and of relevant policy options, which started in September 1993, comes under the integrated assessment part of the Dutch NRP. The first part of the interim report describes the search for an integrated assessment methodology. It starts with emphasizing the need for integrated assessment at a relatively high level of aggregation and from a policy point of view. The conclusion will be that a decision-analytical approach might fit the purpose of a policy-oriented integrated modeling of the global warming problem. The discussion proceeds with an account on decision analysis and its explicit incorporation and analysis of uncertainty. Then influence diagrams, a relatively recent development in decision analysis, are introduced as a useful decision-analytical approach for integrated assessment. Finally, a software environment for creating and analyzing complex influence diagram models is discussed. The second part of the interim report provides a first, provisional integrated modeling of the global warming problem, emphasizing on the illustration of the decision-analytical approach. Major problem elements are identified and an initial problem structure is developed. The problem structure is described in terms of hierarchical influence diagrams. At some places the qualitative structure is filled with quantitative data

Conceptual information processing: A robust approach to KBS-DBMS integration

Science.gov (United States)

Lazzara, Allen V.; Tepfenhart, William; White, Richard C.; Liuzzi, Raymond

1987-01-01

Integrating the respective functionality and architectural features of knowledge base and data base management systems is a topic of considerable interest. Several aspects of this topic and associated issues are addressed. The significance of integration and the problems associated with accomplishing that integration are discussed. The shortcomings of current approaches to integration and the need to fuse the capabilities of both knowledge base and data base management systems motivates the investigation of information processing paradigms. One such paradigm is concept based processing, i.e., processing based on concepts and conceptual relations. An approach to robust knowledge and data base system integration is discussed by addressing progress made in the development of an experimental model for conceptual information processing.

Integrated design approach of the pebble bed modular using models

International Nuclear Information System (INIS)

Venter, P.J.

2005-01-01

The Pebble Bed Modular Reactor (PBMR) is the first pebble bed reactor that will be utilised in a high temperature direct Brayton cycle configuration. This implies that there are a number of unique features in the PBMR that extend from the German experience base. One of the challenges in the design of the PBMR is managing the integrated design process between the designers, the physicists and the analysts. This integrated design process is managed through model-based development work. Three-dimensional CAD models are constructed of the components and parts in the reactor. From the CAD models, CFD models, neutronic models, shielding models, FEM models and other thermodynamic models are derived. These models range from very simple models to extremely detailed and complex models. The models are used in legacy software as well as commercial off-the-shelf software. The different models are also used in code-to-code comparisons to verify the results. This paper will briefly discuss the different models and the interaction between the models, showing the iterative design process that is used in the development of the reactor at PBMR. (author)

Model-integrating software components engineering flexible software systems

CERN Document Server

Derakhshanmanesh, Mahdi

2015-01-01

In his study, Mahdi Derakhshanmanesh builds on the state of the art in modeling by proposing to integrate models into running software on the component-level without translating them to code. Such so-called model-integrating software exploits all advantages of models: models implicitly support a good separation of concerns, they are self-documenting and thus improve understandability and maintainability and in contrast to model-driven approaches there is no synchronization problem anymore between the models and the code generated from them. Using model-integrating components, software will be

An Integrated Approach of Model checking and Temporal Fault Tree for System Safety Analysis

Energy Technology Data Exchange (ETDEWEB)

Koh, Kwang Yong; Seong, Poong Hyun [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of)

2009-10-15

Digitalization of instruments and control systems in nuclear power plants offers the potential to improve plant safety and reliability through features such as increased hardware reliability and stability, and improved failure detection capability. It however makes the systems and their safety analysis more complex. Originally, safety analysis was applied to hardware system components and formal methods mainly to software. For software-controlled or digitalized systems, it is necessary to integrate both. Fault tree analysis (FTA) which has been one of the most widely used safety analysis technique in nuclear industry suffers from several drawbacks as described in. In this work, to resolve the problems, FTA and model checking are integrated to provide formal, automated and qualitative assistance to informal and/or quantitative safety analysis. Our approach proposes to build a formal model of the system together with fault trees. We introduce several temporal gates based on timed computational tree logic (TCTL) to capture absolute time behaviors of the system and to give concrete semantics to fault tree gates to reduce errors during the analysis, and use model checking technique to automate the reasoning process of FTA.

Integrated approach to model decomposed flow hydrograph using artificial neural network and conceptual techniques

Science.gov (United States)

Jain, Ashu; Srinivasulu, Sanaga

2006-02-01

This paper presents the findings of a study aimed at decomposing a flow hydrograph into different segments based on physical concepts in a catchment, and modelling different segments using different technique viz. conceptual and artificial neural networks (ANNs). An integrated modelling framework is proposed capable of modelling infiltration, base flow, evapotranspiration, soil moisture accounting, and certain segments of the decomposed flow hydrograph using conceptual techniques and the complex, non-linear, and dynamic rainfall-runoff process using ANN technique. Specifically, five different multi-layer perceptron (MLP) and two self-organizing map (SOM) models have been developed. The rainfall and streamflow data derived from the Kentucky River catchment were employed to test the proposed methodology and develop all the models. The performance of all the models was evaluated using seven different standard statistical measures. The results obtained in this study indicate that (a) the rainfall-runoff relationship in a large catchment consists of at least three or four different mappings corresponding to different dynamics of the underlying physical processes, (b) an integrated approach that models the different segments of the decomposed flow hydrograph using different techniques is better than a single ANN in modelling the complex, dynamic, non-linear, and fragmented rainfall runoff process, (c) a simple model based on the concept of flow recession is better than an ANN to model the falling limb of a flow hydrograph, and (d) decomposing a flow hydrograph into the different segments corresponding to the different dynamics based on the physical concepts is better than using the soft decomposition employed using SOM.

A cost-efficient expansion of renewable energy sources in the European electricity system. An integrated modelling approach with a particular emphasis on diurnal and seasonal patterns

Energy Technology Data Exchange (ETDEWEB)

Golling, Christiane

2012-11-01

This thesis determines a cost-efficient expansion of electricity generated by renewable energy sources (RES-E) in the European power generation system. It is an integrated modelling approach with a particular emphasis on diurnal and seasonal patterns of renewable energy sources (RES). An integrated modelling approach optimizes the overall European electricity system while comprising fossil, nuclear, and renewable generation as well as storage capacities. The integrated model approach corresponds to a situation in which renewable generation is subject to electricity price signals. In sensitivity scenarios cases of the integrated model approach are compared to situations in which renewable generation is granted priority feed-in and is decoupled from electricity price signals. In addition, the role of different flexibility options, which can be provided by storage capacities and grid expansion are scrutinized. The methodology of the thesis consists of two parts. First, it develops an integrative model approach by extending an existing European electricity model only comprising conventional power generating technologies. Second, an appropriate representation of intermittent RES for electricity market models is established by the determination of corresponding typedays. The typeday modelling takes the spatial correlation of RES and the correlation between wind and solar power into account. Moreover, the typeday modelling captures average dispatch-relevant, diurnal and seasonal RES characteristics such as the level, the variance, and the gradient. The scenario analysis shows that separate developments of renewable and conventional technologies imply several inefficiencies. These increase with higher RES-E penetration. Inefficiencies such as an increased wind power curtailment, an augmented capital turnover, or a higher cumulative installed power generating capacity are revealed and quantified.

Model-Based Integration and Interpretation of Data

DEFF Research Database (Denmark)

Petersen, Johannes

2004-01-01

Data integration and interpretation plays a crucial role in supervisory control. The paper defines a set of generic inference steps for the data integration and interpretation process based on a three-layer model of system representations. The three-layer model is used to clarify the combination...... of constraint and object-centered representations of the work domain throwing new light on the basic principles underlying the data integration and interpretation process of Rasmussen's abstraction hierarchy as well as other model-based approaches combining constraint and object-centered representations. Based...

An integrated hydrological modeling approach for detection and attribution of climatic and human impacts on coastal water resources

Science.gov (United States)

Feng, Dapeng; Zheng, Yi; Mao, Yixin; Zhang, Aijing; Wu, Bin; Li, Jinguo; Tian, Yong; Wu, Xin

2018-02-01

Water resources in coastal areas can be profoundly influenced by both climate change and human activities. These climatic and human impacts are usually intertwined and difficult to isolate. This study developed an integrated model-based approach for detection and attribution of climatic and human impacts and applied this approach to the Luanhe Plain, a typical coastal area in northern China. An integrated surface water-groundwater model was developed for the study area using GSFLOW (coupled groundwater and surface-water flow). Model calibration and validation were performed for background years between 1975 and 2000. The variation in water resources between the 1980s and 1990s was then quantitatively attributed to climate variability, groundwater pumping and changes in upstream inflow. Climate scenarios for future years (2075-2100) were also developed by downscaling the projections in CMIP5. Potential water resource responses to climate change, as well as their uncertainty, were then investigated through integrated modeling. The study results demonstrated the feasibility and value of the integrated modeling-based analysis for water resource management in areas with complex surface water-groundwater interaction. Specific findings for the Luanhe Plain included the following: (1) During the historical period, upstream inflow had the most significant impact on river outflow to the sea, followed by climate variability, whereas groundwater pumping was the least influential. (2) The increase in groundwater pumping had a dominant influence on the decline in groundwater change, followed by climate variability. (3) Synergetic and counteractive effects among different impacting factors, while identified, were not significant, which implied that the interaction among different factors was not very strong in this case. (4) It is highly probable that future climate change will accelerate groundwater depletion in the study area, implying that strict regulations for groundwater

A multimetric approach for predicting the ecological integrity of New Zealand streams

Directory of Open Access Journals (Sweden)

Clapcott J.E.

2014-01-01

Full Text Available Integrating multiple measures of stream health into a combined metric can provide a holistic assessment of the ecological integrity of a stream. The aim of this study was to develop a multimetric index (MMI of stream integrity based on predictive modelling of national data sets of water quality, macroinvertebrates, fish and ecosystem process metrics. We used a boosted regression tree approach to calculate an observed/expected score for each metric prior to combining metrics in a MMI based on data availability and the strength of predictive models. The resulting MMI provides a geographically meaningful prediction of the ecological integrity of rivers in New Zealand, but identifies limitations in data and approach, providing focus for ongoing research.

Qualitative modelling for the Caeté Mangrove Estuary (North Brazil): a preliminary approach to an integrated eco-social analysis

Science.gov (United States)

Ortiz, Marco; Wolff, Matthias

2004-10-01

The sustainability of different integrated management regimes for the mangrove ecosystem of the Caeté Estuary (North Brazil) were assessed using a holistic theoretical framework. As a way to demonstrate that the behaviour and trajectory of complex whole systems are not epiphenomenal to the properties of the small parts, a set of conceptual models from more reductionistic to more holistic were enunciated. These models integrate the scientific information published until present for this mangrove ecosystem. The sustainability of different management scenarios (forestry and fishery) was assessed. Since the exploitation of mangrove trees is not allowed according Brazilian laws, the forestry was only included for simulation purposes. The model simulations revealed that sustainability predictions of reductionistic models should not be extrapolated into holistic approaches. Forestry and fishery activities seem to be sustainable only if they are self-damped. The exploitation of the two mangrove species Rhizophora mangle and Avicenia germinans does not appear to be sustainable, thus a rotation harvest is recommended. A similar conclusion holds for the exploitation of invertebrate species. Our results suggest that more studies should be focused on the estimation of maximum sustainable yield based on a multispecies approach. Any reference to holistic sustainability based on reductionistic approaches may distort our understanding of the natural complex ecosystems.

A data-model integration approach toward improved understanding on wetland functions and hydrological benefits at the catchment scale

Science.gov (United States)

Yeo, I. Y.; Lang, M.; Lee, S.; Huang, C.; Jin, H.; McCarty, G.; Sadeghi, A.

2017-12-01

The wetland ecosystem plays crucial roles in improving hydrological function and ecological integrity for the downstream water and the surrounding landscape. However, changing behaviours and functioning of wetland ecosystems are poorly understood and extremely difficult to characterize. Improved understanding on hydrological behaviours of wetlands, considering their interaction with surrounding landscapes and impacts on downstream waters, is an essential first step toward closing the knowledge gap. We present an integrated wetland-catchment modelling study that capitalizes on recently developed inundation maps and other geospatial data. The aim of the data-model integration is to improve spatial prediction of wetland inundation and evaluate cumulative hydrological benefits at the catchment scale. In this paper, we highlight problems arising from data preparation, parameterization, and process representation in simulating wetlands within a distributed catchment model, and report the recent progress on mapping of wetland dynamics (i.e., inundation) using multiple remotely sensed data. We demonstrate the value of spatially explicit inundation information to develop site-specific wetland parameters and to evaluate model prediction at multi-spatial and temporal scales. This spatial data-model integrated framework is tested using Soil and Water Assessment Tool (SWAT) with improved wetland extension, and applied for an agricultural watershed in the Mid-Atlantic Coastal Plain, USA. This study illustrates necessity of spatially distributed information and a data integrated modelling approach to predict inundation of wetlands and hydrologic function at the local landscape scale, where monitoring and conservation decision making take place.

Integration of case study approach, project design and computer ...

African Journals Online (AJOL)

Integration of case study approach, project design and computer modeling in managerial accounting education ... Journal of Fundamental and Applied Sciences ... in the Laboratory of Management Accounting and Controlling Systems at the ...

Making eco logic and models work : An integrative approach to lake ecosystem modelling

NARCIS (Netherlands)

Kuiper, Jan Jurjen

2016-01-01

Dynamical ecosystem models are important tools that can help ecologists understand complex systems, and turn understanding into predictions of how these systems respond to external changes. This thesis revolves around PCLake, an integrated ecosystem model of shallow lakes that is used by both

Model Driven Integrated Decision-Making in Manufacturing Enterprises

Directory of Open Access Journals (Sweden)

Richard H. Weston

2012-01-01

Full Text Available Decision making requirements and solutions are observed in four world class Manufacturing Enterprises (MEs. Observations made focus on deployed methods of complexity handling that facilitate multi-purpose, distributed decision making. Also observed are examples of partially deficient “integrated decision making” which stem from lack of understanding about how ME structural relations enable and/or constrain reachable ME behaviours. To begin to address this deficiency the paper outlines the use of a “reference model of ME decision making” which can inform the structural design of decision making systems in MEs. Also outlined is a “systematic model driven approach to modelling ME systems” which can particularise the reference model in specific case enterprises and thereby can “underpin integrated ME decision making”. Coherent decomposition and representational mechanisms have been incorporated into the model driven approach to systemise complexity handling. The paper also describes in outline an application of the modelling method in a case study ME and explains how its use has improved the integration of previously distinct planning functions. The modelling approach is particularly innovative in respect to the way it structures the coherent creation and experimental re-use of “fit for purpose” discrete event (predictive simulation models at the multiple levels of abstraction.

Challenges in integrative approaches to modelling the marine ecosystems of the North Atlantic: Physics to fish and coasts to ocean

Science.gov (United States)

Holt, Jason; Icarus Allen, J.; Anderson, Thomas R.; Brewin, Robert; Butenschön, Momme; Harle, James; Huse, Geir; Lehodey, Patrick; Lindemann, Christian; Memery, Laurent; Salihoglu, Baris; Senina, Inna; Yool, Andrew

2014-12-01

It has long been recognised that there are strong interactions and feedbacks between climate, upper ocean biogeochemistry and marine food webs, and also that food web structure and phytoplankton community distribution are important determinants of variability in carbon production and export from the euphotic zone. Numerical models provide a vital tool to explore these interactions, given their capability to investigate multiple connected components of the system and the sensitivity to multiple drivers, including potential future conditions. A major driver for ecosystem model development is the demand for quantitative tools to support ecosystem-based management initiatives. The purpose of this paper is to review approaches to the modelling of marine ecosystems with a focus on the North Atlantic Ocean and its adjacent shelf seas, and to highlight the challenges they face and suggest ways forward. We consider the state of the art in simulating oceans and shelf sea physics, planktonic and higher trophic level ecosystems, and look towards building an integrative approach with these existing tools. We note how the different approaches have evolved historically and that many of the previous obstacles to harmonisation may no longer be present. We illustrate this with examples from the on-going and planned modelling effort in the Integrative Modelling Work Package of the EURO-BASIN programme.

Modular Architecture for Integrated Model-Based Decision Support.

Science.gov (United States)

Gaebel, Jan; Schreiber, Erik; Oeser, Alexander; Oeltze-Jafra, Steffen

2018-01-01

Model-based decision support systems promise to be a valuable addition to oncological treatments and the implementation of personalized therapies. For the integration and sharing of decision models, the involved systems must be able to communicate with each other. In this paper, we propose a modularized architecture of dedicated systems for the integration of probabilistic decision models into existing hospital environments. These systems interconnect via web services and provide model sharing and processing capabilities for clinical information systems. Along the lines of IHE integration profiles from other disciplines and the meaningful reuse of routinely recorded patient data, our approach aims for the seamless integration of decision models into hospital infrastructure and the physicians' daily work.

From integrated control to integrated farming, an experimental approach

NARCIS (Netherlands)

Vereijken, P.H.

1989-01-01

Integrated control or integrated pest management (IPM), as envisaged originally, is not being practised to any large extent in arable farming, notwithstanding considerable research efforts. The reasons for this are discussed. A more basic approach called integrated farming is suggested. Preliminary

An Integrated Hydro-Economic Modelling Framework to Evaluate Water Allocation Strategies I: Model Development.

NARCIS (Netherlands)

George, B.; Malano, H.; Davidson, B.; Hellegers, P.; Bharati, L.; Sylvain, M.

2011-01-01

In this paper an integrated modelling framework for water resources planning and management that can be used to carry out an analysis of alternative policy scenarios for water allocation and use is described. The modelling approach is based on integrating a network allocation model (REALM) and a

A model for optimization of process integration investments under uncertainty

International Nuclear Information System (INIS)

Svensson, Elin; Stroemberg, Ann-Brith; Patriksson, Michael

2011-01-01

The long-term economic outcome of energy-related industrial investment projects is difficult to evaluate because of uncertain energy market conditions. In this article, a general, multistage, stochastic programming model for the optimization of investments in process integration and industrial energy technologies is proposed. The problem is formulated as a mixed-binary linear programming model where uncertainties are modelled using a scenario-based approach. The objective is to maximize the expected net present value of the investments which enables heat savings and decreased energy imports or increased energy exports at an industrial plant. The proposed modelling approach enables a long-term planning of industrial, energy-related investments through the simultaneous optimization of immediate and later decisions. The stochastic programming approach is also suitable for modelling what is possibly complex process integration constraints. The general model formulation presented here is a suitable basis for more specialized case studies dealing with optimization of investments in energy efficiency. -- Highlights: → Stochastic programming approach to long-term planning of process integration investments. → Extensive mathematical model formulation. → Multi-stage investment decisions and scenario-based modelling of uncertain energy prices. → Results illustrate how investments made now affect later investment and operation opportunities. → Approach for evaluation of robustness with respect to variations in probability distribution.

On the functional integral approach in quantum statistics. 1. Some approximations

International Nuclear Information System (INIS)

Dai Xianxi.

1990-08-01

In this paper the susceptibility of a Kondo system in a fairly wide temperature region is calculated in the first harmonic approximation in a functional integral approach. The comparison with that of the renormalization group theory shows that in this region the two results agree quite well. The expansion of the partition function with infinite independent harmonics for the Anderson model is studied. Some symmetry relations are generalized. It is a challenging problem to develop a functional integral approach including diagram analysis, mixed mode effects and some exact relations in the Anderson system proved in the functional integral approach. These topics will be discussed in the next paper. (author). 22 refs, 1 fig

Social Ecological Model Analysis for ICT Integration

Science.gov (United States)

Zagami, Jason

2013-01-01

ICT integration of teacher preparation programmes was undertaken by the Australian Teaching Teachers for the Future (TTF) project in all 39 Australian teacher education institutions and highlighted the need for guidelines to inform systemic ICT integration approaches. A Social Ecological Model (SEM) was used to positively inform integration…

Integral equation approach to time-dependent kinematic dynamos in finite domains

International Nuclear Information System (INIS)

Xu Mingtian; Stefani, Frank; Gerbeth, Gunter

2004-01-01

The homogeneous dynamo effect is at the root of cosmic magnetic field generation. With only a very few exceptions, the numerical treatment of homogeneous dynamos is carried out in the framework of the differential equation approach. The present paper tries to facilitate the use of integral equations in dynamo research. Apart from the pedagogical value to illustrate dynamo action within the well-known picture of the Biot-Savart law, the integral equation approach has a number of practical advantages. The first advantage is its proven numerical robustness and stability. The second and perhaps most important advantage is its applicability to dynamos in arbitrary geometries. The third advantage is its intimate connection to inverse problems relevant not only for dynamos but also for technical applications of magnetohydrodynamics. The paper provides the first general formulation and application of the integral equation approach to time-dependent kinematic dynamos, with stationary dynamo sources, in finite domains. The time dependence is restricted to the magnetic field, whereas the velocity or corresponding mean-field sources of dynamo action are supposed to be stationary. For the spherically symmetric α 2 dynamo model it is shown how the general formulation is reduced to a coupled system of two radial integral equations for the defining scalars of the poloidal and toroidal field components. The integral equation formulation for spherical dynamos with general stationary velocity fields is also derived. Two numerical examples - the α 2 dynamo model with radially varying α and the Bullard-Gellman model - illustrate the equivalence of the approach with the usual differential equation method. The main advantage of the method is exemplified by the treatment of an α 2 dynamo in rectangular domains

Integrating Identity Management With Federated Healthcare Data Models

Science.gov (United States)

Hu, Jun; Peyton, Liam

In order to manage performance and provide integrated services, health care data needs to be linked and aggregated across data sources from different organizations. The Internet and secure B2B networks offer the possibility of providing near real-time integration. However, there are three major stumbling blocks. One is to standardize and agree upon a common data model across organizations. The second is to match identities between different locations in order to link and aggregate records. The third is to protect identity and ensure compliance with privacy laws. In this paper, we analyze three main approaches to the problem and use a healthcare scenario to illustrate how each one addresses different aspects of the problem while failing to address others. We then present a systematic framework in which the different approaches can be flexibly combined for a more comprehensive approach to integrate identity management with federated healthcare data models.

Integrated healthcare networks' performance: a growth curve modeling approach.

Science.gov (United States)

Wan, Thomas T H; Wang, Bill B L

2003-05-01

This study examines the effects of integration on the performance ratings of the top 100 integrated healthcare networks (IHNs) in the United States. A strategic-contingency theory is used to identify the relationship of IHNs' performance to their structural and operational characteristics and integration strategies. To create a database for the panel study, the top 100 IHNs selected by the SMG Marketing Group in 1998 were followed up in 1999 and 2000. The data were merged with the Dorenfest data on information system integration. A growth curve model was developed and validated by the Mplus statistical program. Factors influencing the top 100 IHNs' performance in 1998 and their subsequent rankings in the consecutive years were analyzed. IHNs' initial performance scores were positively influenced by network size, number of affiliated physicians and profit margin, and were negatively associated with average length of stay and technical efficiency. The continuing high performance, judged by maintaining higher performance scores, tended to be enhanced by the use of more managerial or executive decision-support systems. Future studies should include time-varying operational indicators to serve as predictors of network performance.

Modern model of integrated corporate communication

Directory of Open Access Journals (Sweden)

Milica Slijepčević

2018-03-01

Full Text Available The main purpose of this paper is to present the modern model of integrated corporate communication. Beside this, the authors will describe the changes occurring in the corporate environment and importance of changing the model of corporate communication. This paper also discusses the importance of implementation of the suggested model, the use of new media and effects of these changes on corporations. The approach used in this paper is the literature review. The authors explore the importance of implementation of the suggested model and the new media in corporate communication, both internal and external, addressing all the stakeholders and communication contents. The paper recommends implementation of a modern model of integrated corporate communication as a response to constant development of the new media and generation changes taking place. Practical implications: the modern model of integrated corporate communication can be used as an upgrade of the conventional communication models. This modern model empowers companies to sustain and build up the existing relationships with stakeholders, and to find out and create new relationships with stakeholders who were previously inaccessible and invisible.

Integrated corporate structure life cycle management modeling and organization

OpenAIRE

Naumenko, M.; Morozova, L.

2011-01-01

Integrated business structure presented as complementary pool of its participants skills. The methodical approach to integrated business structure life cycle modeling proposed. Recommendations of enterprises life cycles stages correlate are submitted.

Integrative structure modeling with the Integrative Modeling Platform.

Science.gov (United States)

Webb, Benjamin; Viswanath, Shruthi; Bonomi, Massimiliano; Pellarin, Riccardo; Greenberg, Charles H; Saltzberg, Daniel; Sali, Andrej

2018-01-01

Building models of a biological system that are consistent with the myriad data available is one of the key challenges in biology. Modeling the structure and dynamics of macromolecular assemblies, for example, can give insights into how biological systems work, evolved, might be controlled, and even designed. Integrative structure modeling casts the building of structural models as a computational optimization problem, for which information about the assembly is encoded into a scoring function that evaluates candidate models. Here, we describe our open source software suite for integrative structure modeling, Integrative Modeling Platform (https://integrativemodeling.org), and demonstrate its use. © 2017 The Protein Society.

Integrating Cellular Metabolism into a Multiscale Whole-Body Model

Science.gov (United States)

Krauss, Markus; Schaller, Stephan; Borchers, Steffen; Findeisen, Rolf; Lippert, Jörg; Kuepfer, Lars

2012-01-01

Cellular metabolism continuously processes an enormous range of external compounds into endogenous metabolites and is as such a key element in human physiology. The multifaceted physiological role of the metabolic network fulfilling the catalytic conversions can only be fully understood from a whole-body perspective where the causal interplay of the metabolic states of individual cells, the surrounding tissue and the whole organism are simultaneously considered. We here present an approach relying on dynamic flux balance analysis that allows the integration of metabolic networks at the cellular scale into standardized physiologically-based pharmacokinetic models at the whole-body level. To evaluate our approach we integrated a genome-scale network reconstruction of a human hepatocyte into the liver tissue of a physiologically-based pharmacokinetic model of a human adult. The resulting multiscale model was used to investigate hyperuricemia therapy, ammonia detoxification and paracetamol-induced toxication at a systems level. The specific models simultaneously integrate multiple layers of biological organization and offer mechanistic insights into pathology and medication. The approach presented may in future support a mechanistic understanding in diagnostics and drug development. PMID:23133351

An integrated approach to permeability modeling using micro-models

Energy Technology Data Exchange (ETDEWEB)

Hosseini, A.H.; Leuangthong, O.; Deutsch, C.V. [Society of Petroleum Engineers, Canadian Section, Calgary, AB (Canada)]|[Alberta Univ., Edmonton, AB (Canada)

2008-10-15

An important factor in predicting the performance of steam assisted gravity drainage (SAGD) well pairs is the spatial distribution of permeability. Complications that make the inference of a reliable porosity-permeability relationship impossible include the presence of short-scale variability in sand/shale sequences; preferential sampling of core data; and uncertainty in upscaling parameters. Micro-modelling is a simple and effective method for overcoming these complications. This paper proposed a micro-modeling approach to account for sampling bias, small laminated features with high permeability contrast, and uncertainty in upscaling parameters. The paper described the steps and challenges of micro-modeling and discussed the construction of binary mixture geo-blocks; flow simulation and upscaling; extended power law formalism (EPLF); and the application of micro-modeling and EPLF. An extended power-law formalism to account for changes in clean sand permeability as a function of macroscopic shale content was also proposed and tested against flow simulation results. There was close agreement between the model and simulation results. The proposed methodology was also applied to build the porosity-permeability relationship for laminated and brecciated facies of McMurray oil sands. Experimental data was in good agreement with the experimental data. 8 refs., 17 figs.

An Integrated Modeling Approach to Evaluate and Optimize Data Center Sustainability, Dependability and Cost

Directory of Open Access Journals (Sweden)

Gustavo Callou

2014-01-01

Full Text Available Data centers have evolved dramatically in recent years, due to the advent of social networking services, e-commerce and cloud computing. The conflicting requirements are the high availability levels demanded against the low sustainability impact and cost values. The approaches that evaluate and optimize these requirements are essential to support designers of data center architectures. Our work aims to propose an integrated approach to estimate and optimize these issues with the support of the developed environment, Mercury. Mercury is a tool for dependability, performance and energy flow evaluation. The tool supports reliability block diagrams (RBD, stochastic Petri nets (SPNs, continuous-time Markov chains (CTMC and energy flow (EFM models. The EFM verifies the energy flow on data center architectures, taking into account the energy efficiency and power capacity that each device can provide (assuming power systems or extract (considering cooling components. The EFM also estimates the sustainability impact and cost issues of data center architectures. Additionally, a methodology is also considered to support the modeling, evaluation and optimization processes. Two case studies are presented to illustrate the adopted methodology on data center power systems.

FUPOL: an Integrated Approach to Participative Policies

Directory of Open Access Journals (Sweden)

Silvana Tomic Rotim

2014-05-01

Full Text Available The Future Policy Modelling Project (FUPOL is a research project funded by the 7th framework program of the European Union. Its research focus are new technologies and methods for e-governance, e-participation and policy modelling. The FUPOL consortium consists of partners from European countries, China and Kenya. and comprises innovative multinational companies, leading research institutes, high-level political organizations as well as strong pilot partners. This paper describes the FUPOL new integrated approach to policy design and implementation including also specific examples from real life pilots in cities from different countries. FUPOL consists of an advanced policy lifecycle and an IT-solution with features supporting all phases of the proposed lifecycle. The FUPOL concept and functional modules as well as the technical architecture to achieve such a complete integration are described.

Integrative medicine approach to chronic pain.

Science.gov (United States)

Teets, Raymond Y; Dahmer, Stephen; Scott, Emilie

2010-06-01

Chronic pain can be a frustrating condition for patient and clinician. The integrative medicine approach to pain can offer hope, adding safe complementary and alternative medical (CAM) therapies to mitigate pain and suffering. Such CAM therapies include nutrition, supplements and herbs, manual medicine, acupuncture, yoga, and mind-body approaches. The evidence is heterogeneous regarding these approaches, but some evidence suggests efficacy and confirms safety. The integrative medicine approach can be beneficial in a patient with chronic pain. Copyright 2010 Elsevier Inc. All rights reserved.

Towards Finite-Gap Integration of the Inozemtsev Model

Directory of Open Access Journals (Sweden)

Kouichi Takemura

2007-03-01

Full Text Available The Inozemtsev model is considered to be a multivaluable generalization of Heun's equation. We review results on Heun's equation, the elliptic Calogero-Moser-Sutherland model and the Inozemtsev model, and discuss some approaches to the finite-gap integration for multivariable models.

A Federated Enterprise Architecture and MBSE Modeling Framework for Integrating Design Automation into a Global PLM Approach

OpenAIRE

Vosgien , Thomas; Rigger , Eugen; Schwarz , Martin; Shea , Kristina

2017-01-01

Part 1: PLM Maturity, Implementation and Adoption; International audience; PLM and Design Automation (DA) are two interdependent and necessary approaches to increase the performance and efficiency of product development processes. Often, DA systems’ usability suffers due to a lack of integration in industrial business environments stemming from the independent consideration of PLM and DA. This article proposes a methodological and modeling framework for developing and deploying DA solutions w...

Workshop on Current Issues in Predictive Approaches to Intelligence and Security Analytics: Fostering the Creation of Decision Advantage through Model Integration and Evaluation

Energy Technology Data Exchange (ETDEWEB)

Sanfilippo, Antonio P.

2010-05-23

The increasing asymmetric nature of threats to the security, health and sustainable growth of our society requires that anticipatory reasoning become an everyday activity. Currently, the use of anticipatory reasoning is hindered by the lack of systematic methods for combining knowledge- and evidence-based models, integrating modeling algorithms, and assessing model validity, accuracy and utility. The workshop addresses these gaps with the intent of fostering the creation of a community of interest on model integration and evaluation that may serve as an aggregation point for existing efforts and a launch pad for new approaches.

Integrating incremental learning and episodic memory models of the hippocampal region.

NARCIS (Netherlands)

Meeter, M.; Myers, C.E; Gluck, M.A.

2005-01-01

By integrating previous computational models of corticohippocampal function, the authors develop and test a unified theory of the neural substrates of familiarity, recollection, and classical conditioning. This approach integrates models from 2 traditions of hippocampal modeling, those of episodic

An integrated development environment for PMESII model authoring, integration, validation, and debugging

Science.gov (United States)

Pioch, Nicholas J.; Lofdahl, Corey; Sao Pedro, Michael; Krikeles, Basil; Morley, Liam

2007-04-01

To foster shared battlespace awareness in Air Operations Centers supporting the Joint Forces Commander and Joint Force Air Component Commander, BAE Systems is developing a Commander's Model Integration and Simulation Toolkit (CMIST), an Integrated Development Environment (IDE) for model authoring, integration, validation, and debugging. CMIST is built on the versatile Eclipse framework, a widely used open development platform comprised of extensible frameworks that enable development of tools for building, deploying, and managing software. CMIST provides two distinct layers: 1) a Commander's IDE for supporting staff to author models spanning the Political, Military, Economic, Social, Infrastructure, Information (PMESII) taxonomy; integrate multiple native (third-party) models; validate model interfaces and outputs; and debug the integrated models via intuitive controls and time series visualization, and 2) a PMESII IDE for modeling and simulation developers to rapidly incorporate new native simulation tools and models to make them available for use in the Commander's IDE. The PMESII IDE provides shared ontologies and repositories for world state, modeling concepts, and native tool characterization. CMIST includes extensible libraries for 1) reusable data transforms for semantic alignment of native data with the shared ontology, and 2) interaction patterns to synchronize multiple native simulations with disparate modeling paradigms, such as continuous-time system dynamics, agent-based discrete event simulation, and aggregate solution methods such as Monte Carlo sampling over dynamic Bayesian networks. This paper describes the CMIST system architecture, our technical approach to addressing these semantic alignment and synchronization problems, and initial results from integrating Political-Military-Economic models of post-war Iraq spanning multiple modeling paradigms.

An integrated approach to human reliability analysis -- decision analytic dynamic reliability model

International Nuclear Information System (INIS)

Holmberg, J.; Hukki, K.; Norros, L.; Pulkkinen, U.; Pyy, P.

1999-01-01

The reliability of human operators in process control is sensitive to the context. In many contemporary human reliability analysis (HRA) methods, this is not sufficiently taken into account. The aim of this article is that integration between probabilistic and psychological approaches in human reliability should be attempted. This is achieved first, by adopting such methods that adequately reflect the essential features of the process control activity, and secondly, by carrying out an interactive HRA process. Description of the activity context, probabilistic modeling, and psychological analysis form an iterative interdisciplinary sequence of analysis in which the results of one sub-task maybe input to another. The analysis of the context is carried out first with the help of a common set of conceptual tools. The resulting descriptions of the context promote the probabilistic modeling, through which new results regarding the probabilistic dynamics can be achieved. These can be incorporated in the context descriptions used as reference in the psychological analysis of actual performance. The results also provide new knowledge of the constraints of activity, by providing information of the premises of the operator's actions. Finally, the stochastic marked point process model gives a tool, by which psychological methodology may be interpreted and utilized for reliability analysis

Data-driven integration of genome-scale regulatory and metabolic network models

Science.gov (United States)

Imam, Saheed; Schäuble, Sascha; Brooks, Aaron N.; Baliga, Nitin S.; Price, Nathan D.

2015-01-01

Microbes are diverse and extremely versatile organisms that play vital roles in all ecological niches. Understanding and harnessing microbial systems will be key to the sustainability of our planet. One approach to improving our knowledge of microbial processes is through data-driven and mechanism-informed computational modeling. Individual models of biological networks (such as metabolism, transcription, and signaling) have played pivotal roles in driving microbial research through the years. These networks, however, are highly interconnected and function in concert—a fact that has led to the development of a variety of approaches aimed at simulating the integrated functions of two or more network types. Though the task of integrating these different models is fraught with new challenges, the large amounts of high-throughput data sets being generated, and algorithms being developed, means that the time is at hand for concerted efforts to build integrated regulatory-metabolic networks in a data-driven fashion. In this perspective, we review current approaches for constructing integrated regulatory-metabolic models and outline new strategies for future development of these network models for any microbial system. PMID:25999934

Numerical modeling of hydrodynamics and sediment transport—an integrated approach

Science.gov (United States)

Gic-Grusza, Gabriela; Dudkowska, Aleksandra

2017-10-01

Point measurement-based estimation of bedload transport in the coastal zone is very difficult. The only way to assess the magnitude and direction of bedload transport in larger areas, particularly those characterized by complex bottom topography and hydrodynamics, is to use a holistic approach. This requires modeling of waves, currents, and the critical bed shear stress and bedload transport magnitude, with a due consideration to the realistic bathymetry and distribution of surface sediment types. Such a holistic approach is presented in this paper which describes modeling of bedload transport in the Gulf of Gdańsk. Extreme storm conditions defined based on 138-year NOAA data were assumed. The SWAN model (Booij et al. 1999) was used to define wind-wave fields, whereas wave-induced currents were calculated using the Kołodko and Gic-Grusza (2015) model, and the magnitude of bedload transport was estimated using the modified Meyer-Peter and Müller (1948) formula. The calculations were performed using a GIS model. The results obtained are innovative. The approach presented appears to be a valuable source of information on bedload transport in the coastal zone.

Model-based Engineering for the Integration of Manufacturing Systems with Advanced Analytics

OpenAIRE

Lechevalier , David; Narayanan , Anantha; Rachuri , Sudarsan; Foufou , Sebti; Lee , Y Tina

2016-01-01

Part 3: Interoperability and Systems Integration; International audience; To employ data analytics effectively and efficiently on manufacturing systems, engineers and data scientists need to collaborate closely to bring their domain knowledge together. In this paper, we introduce a domain-specific modeling approach to integrate a manufacturing system model with advanced analytics, in particular neural networks, to model predictions. Our approach combines a set of meta-models and transformatio...

Connecting the Dots Downunder Towards An Integrated Institutional Approach To Digital Content Management

CERN Document Server

Harboe-Ree, Cathrine

2004-01-01

There is a growing interest among academic institutions in managing institutional digital content produced in and for research, teaching and learning. This article argues for an integrated approach to this activity and examines the role of libraries in facilitating this. It then considers some existing approaches to providing software to support this. Australian initiatives consistent with this integrated model are then discussed.

An Integrated Lumped Parameter-CFD approach for off-design ejector performance evaluation

International Nuclear Information System (INIS)

Besagni, Giorgio; Mereu, Riccardo; Chiesa, Paolo; Inzoli, Fabio

2015-01-01

Highlights: • We validate a CFD approach for a convergent nozzle ejector using global and local measurement. • We evaluate seven RANS turbulence models for convergent nozzle ejector. • We introduce a lumped parameter model for on-design and off-design ejector performance evaluation. • We analyze the relationship between local flow behavior and lumped parameters of the model. • We discuss how to improve predicting capabilities of the model by variable parameters calibrated on CFD simulations. - Abstract: This paper presents an Integrated Lumped Parameter Model-Computational Fluid-Dynamics approach for off-design ejector performance evaluation. The purpose of this approach is to evaluate the entrainment ratio, for a fixed geometry, in both on-design and off-design operating conditions. The proposed model is based on a Lumped Parameter Model (LPM) with variable ejector component efficiencies provided by CFD simulations. The CFD results are used for developing maps for ejector component efficiencies in a broad range of operating conditions. The ejector component efficiency maps couple the CFD and the LPM techniques for building an Integrated LPM-CFD approach. The proposed approach is demonstrated for a convergent nozzle ejector and the paper is structured in four parts. At first, the CFD approach is validated by global and local data and seven Reynolds Averaged Navier Stokes (RANS) turbulence models are compared: the k–ω SST showed good performance and was selected for the rest of the analysis. At second, a Lumped Parameter Model (LPM) for subsonic ejector is developed and the ejector component efficiencies have been defined. At third, the CFD approach is used to investigate the flow field, to analyze its influence on ejector component efficiencies and to propose efficiency correlations and maps linking ejector component efficiencies and local flow quantities. In the last part, the efficiency maps are embedded into the lumped parameter model, thus creating

Model of the Russian Federation Construction Innovation System: An Integrated Participatory Systems Approach

OpenAIRE

Emiliya Suprun; Oz Sahin; Rodney A. Stewart; Kriengsak Panuwatwanich

2016-01-01

This research integrates systemic and participatory techniques to model the Russian Federation construction innovation system. Understanding this complex construction innovation system and determining the best levers for enhancing it require the dynamic modelling of a number of factors, such as flows of resources and activities, policies, uncertainty and time. To build the foundations for such a dynamic model, the employed study method utilised an integrated stakeholder-based participatory ap...

The Anthropology of Science Education Reform: An Alabama Model for Building an Integrated Stakeholder Systems Approach

Science.gov (United States)

Denson, R. L.; Cox, G. N.

2004-12-01

Anthropologists are concerned with every aspect of the culture they are investigating. One of the five main branches of anthropology, socio-cultural anthropology, concerns itself with studying the relationship between behavior and culture. This paper explores the concept that changing the behavior of our culture - its beliefs and values - towards science is at the heart of science education reform. There are five institutions that socio-cultural anthropologists use to study the social organization of cultures: the educational system is only one of them. Its function - across all cultures - is to serve as a mechanism for implementing change in cultural beliefs and values. As leaders of science education reform, the Alabama model contends that we must stop the struggle with our purpose and get on with the business of leading culture change through an integrated stakeholder systems approach. This model stresses the need for the interaction of agencies other than education - including government, industry, the media and our health communities to operate in an integrated and systemic fashion to address the issues of living among a technically literate society. Twenty-five years of science education reform needs being voiced and programs being developed has not produced the desired results from within the educational system. This is too limited a focus to affect any real cultural change. It is when we acknowledge that students spend only an average of 12 percent of their life time in schools, that we can begin to ask ourselves what are our students learning the other 88 percent of their time - from their peers, their parents and the media - and what should we be doing to address this cultural crisis in these other arenas in addition to the educational system? The Alabama Math, Science and Technology Education Coalition (AMSTEC) is a non-profit 501c(3) organization operating in the state of Alabama to provide leadership in improving mathematics, science, and technology

From Physical Process to Economic Cost - Integrated Approaches of Landslide Risk Assessment

Science.gov (United States)

Klose, M.; Damm, B.

2014-12-01

The nature of landslides is complex in many respects, with landslide hazard and impact being dependent on a variety of factors. This obviously requires an integrated assessment for fundamental understanding of landslide risk. Integrated risk assessment, according to the approach presented in this contribution, implies combining prediction of future landslide occurrence with analysis of landslide impact in the past. A critical step for assessing landslide risk in integrated perspective is to analyze what types of landslide damage affected people and property in which way and how people contributed and responded to these damage types. In integrated risk assessment, the focus is on systematic identification and monetization of landslide damage, and analytical tools that allow deriving economic costs from physical landslide processes are at the heart of this approach. The broad spectrum of landslide types and process mechanisms as well as nonlinearity between landslide magnitude, damage intensity, and direct costs are some main factors explaining recent challenges in risk assessment. The two prevailing approaches for assessing the impact of landslides in economic terms are cost survey (ex-post) and risk analysis (ex-ante). Both approaches are able to complement each other, but yet a combination of them has not been realized so far. It is common practice today to derive landslide risk without considering landslide process-based cause-effect relationships, since integrated concepts or new modeling tools expanding conventional methods are still widely missing. The approach introduced in this contribution is based on a systematic framework that combines cost survey and GIS-based tools for hazard or cost modeling with methods to assess interactions between land use practices and landslides in historical perspective. Fundamental understanding of landslide risk also requires knowledge about the economic and fiscal relevance of landslide losses, wherefore analysis of their

An integrated Boltzmann+hydrodynamics approach to heavy ion collisions

International Nuclear Information System (INIS)

Petersen, Hannah

2009-01-01

In this thesis the first fully integrated Boltzmann+hydrodynamics approach to relativistic heavy ion reactions has been developed. After a short introduction that motivates the study of heavy ion reactions as the tool to get insights about the QCD phase diagram, the most important theoretical approaches to describe the system are reviewed. The hadron-string transport approach that this work is based on is the Ultra-relativistic Quantum Molecular Dynamics (UrQMD) approach. Predictions for the charged particle multiplicities at LHC energies are made. The next step is the development of a new framework to calculate the baryon number density in a transport approach. Time evolutions of the net baryon number and the quark density have been calculated at AGS, SPS and RHIC energies. Studies of phase diagram trajectories using hydrodynamics are performed. The hybrid approach that has been developed as the main part of this thesis is based on the UrQMD transport approach with an intermediate hydrodynamical evolution for the hot and dense stage of the collision. The full (3+1) dimensional ideal relativistic one fluid dynamics evolution is solved using the SHASTA algorithm. Three different equations of state have been used, namely a hadron gas equation of state without a QGP phase transition, a chiral EoS and a bag model EoS including a strong first order phase transition. For the freeze-out transition from hydrodynamics to the cascade calculation two different set-ups are employed. The parameter dependences of the model are investigated and the time evolution of different quantities is explored. The hybrid model calculation is able to reproduce the experimentally measured integrated as well as transverse momentum dependent v 2 values for charged particles. The multiplicity and mean transverse mass excitation function is calculated for pions, protons and kaons in the energy range from E lab =2-160 A GeV. The HBT correlation of the negatively charged pion source created in

An integrated Boltzmann+hydrodynamics approach to heavy ion collisions

Energy Technology Data Exchange (ETDEWEB)

Petersen, Hannah

2009-04-22

In this thesis the first fully integrated Boltzmann+hydrodynamics approach to relativistic heavy ion reactions has been developed. After a short introduction that motivates the study of heavy ion reactions as the tool to get insights about the QCD phase diagram, the most important theoretical approaches to describe the system are reviewed. The hadron-string transport approach that this work is based on is the Ultra-relativistic Quantum Molecular Dynamics (UrQMD) approach. Predictions for the charged particle multiplicities at LHC energies are made. The next step is the development of a new framework to calculate the baryon number density in a transport approach. Time evolutions of the net baryon number and the quark density have been calculated at AGS, SPS and RHIC energies. Studies of phase diagram trajectories using hydrodynamics are performed. The hybrid approach that has been developed as the main part of this thesis is based on the UrQMD transport approach with an intermediate hydrodynamical evolution for the hot and dense stage of the collision. The full (3+1) dimensional ideal relativistic one fluid dynamics evolution is solved using the SHASTA algorithm. Three different equations of state have been used, namely a hadron gas equation of state without a QGP phase transition, a chiral EoS and a bag model EoS including a strong first order phase transition. For the freeze-out transition from hydrodynamics to the cascade calculation two different set-ups are employed. The parameter dependences of the model are investigated and the time evolution of different quantities is explored. The hybrid model calculation is able to reproduce the experimentally measured integrated as well as transverse momentum dependent v{sub 2} values for charged particles. The multiplicity and mean transverse mass excitation function is calculated for pions, protons and kaons in the energy range from E{sub lab}=2-160 A GeV. The HBT correlation of the negatively charged pion source

Spatial Data Integration Using Ontology-Based Approach

Science.gov (United States)

Hasani, S.; Sadeghi-Niaraki, A.; Jelokhani-Niaraki, M.

2015-12-01

In today's world, the necessity for spatial data for various organizations is becoming so crucial that many of these organizations have begun to produce spatial data for that purpose. In some circumstances, the need to obtain real time integrated data requires sustainable mechanism to process real-time integration. Case in point, the disater management situations that requires obtaining real time data from various sources of information. One of the problematic challenges in the mentioned situation is the high degree of heterogeneity between different organizations data. To solve this issue, we introduce an ontology-based method to provide sharing and integration capabilities for the existing databases. In addition to resolving semantic heterogeneity, better access to information is also provided by our proposed method. Our approach is consisted of three steps, the first step is identification of the object in a relational database, then the semantic relationships between them are modelled and subsequently, the ontology of each database is created. In a second step, the relative ontology will be inserted into the database and the relationship of each class of ontology will be inserted into the new created column in database tables. Last step is consisted of a platform based on service-oriented architecture, which allows integration of data. This is done by using the concept of ontology mapping. The proposed approach, in addition to being fast and low cost, makes the process of data integration easy and the data remains unchanged and thus takes advantage of the legacy application provided.

SPATIAL DATA INTEGRATION USING ONTOLOGY-BASED APPROACH

Directory of Open Access Journals (Sweden)

S. Hasani

2015-12-01

Full Text Available In today's world, the necessity for spatial data for various organizations is becoming so crucial that many of these organizations have begun to produce spatial data for that purpose. In some circumstances, the need to obtain real time integrated data requires sustainable mechanism to process real-time integration. Case in point, the disater management situations that requires obtaining real time data from various sources of information. One of the problematic challenges in the mentioned situation is the high degree of heterogeneity between different organizations data. To solve this issue, we introduce an ontology-based method to provide sharing and integration capabilities for the existing databases. In addition to resolving semantic heterogeneity, better access to information is also provided by our proposed method. Our approach is consisted of three steps, the first step is identification of the object in a relational database, then the semantic relationships between them are modelled and subsequently, the ontology of each database is created. In a second step, the relative ontology will be inserted into the database and the relationship of each class of ontology will be inserted into the new created column in database tables. Last step is consisted of a platform based on service-oriented architecture, which allows integration of data. This is done by using the concept of ontology mapping. The proposed approach, in addition to being fast and low cost, makes the process of data integration easy and the data remains unchanged and thus takes advantage of the legacy application provided.

Integrating cellular metabolism into a multiscale whole-body model.

Directory of Open Access Journals (Sweden)

Markus Krauss

Full Text Available Cellular metabolism continuously processes an enormous range of external compounds into endogenous metabolites and is as such a key element in human physiology. The multifaceted physiological role of the metabolic network fulfilling the catalytic conversions can only be fully understood from a whole-body perspective where the causal interplay of the metabolic states of individual cells, the surrounding tissue and the whole organism are simultaneously considered. We here present an approach relying on dynamic flux balance analysis that allows the integration of metabolic networks at the cellular scale into standardized physiologically-based pharmacokinetic models at the whole-body level. To evaluate our approach we integrated a genome-scale network reconstruction of a human hepatocyte into the liver tissue of a physiologically-based pharmacokinetic model of a human adult. The resulting multiscale model was used to investigate hyperuricemia therapy, ammonia detoxification and paracetamol-induced toxication at a systems level. The specific models simultaneously integrate multiple layers of biological organization and offer mechanistic insights into pathology and medication. The approach presented may in future support a mechanistic understanding in diagnostics and drug development.

Predicting cycle time distributions for integrated processing workstations : an aggregate modeling approach

NARCIS (Netherlands)

Veeger, C.P.L.; Etman, L.F.P.; Lefeber, A.A.J.; Adan, I.J.B.F.; Herk, van J.; Rooda, J.E.

2011-01-01

To predict cycle time distributions of integrated processing workstations, detailed simulation models are almost exclusively used; these models require considerable development and maintenance effort. As an alternative, we propose an aggregate model that is a lumped-parameter representation of the

Fracture network modelling: an integrated approach for realisation of complex fracture network geometries

International Nuclear Information System (INIS)

Srivastava, R.M.

2007-01-01

In its efforts to improve geological support of the safety case, Ontario Power Generation's Deep Geologic Repository Technology Programme (DGRTP) has developed a procedure (Srivastava, 2002) for creating realistic 3-D fracture network models (FNMs) that honor information typically available at the time of preliminary site characterisation: By accommodating all of the these various pieces of 'hard' and 'soft' data, these FNMs provide a single, coherent and consistent model that can serve the needs of many preliminary site characterisation studies. The detailed, complex and realistic models of 3-D fracture geometry produced by this method can serve as the basis for developing rock property models to be used in flow and transport studies. They can also be used for exploring the suitability of a proposed site by providing quantitative assessments of the probability that a proposed repository with a specified geometry will be intersected by fractures. When integrated with state-of-the-art scientific visualisation, these models can also help in the planning of additional data gathering activities by identifying critical fractures that merit further detailed investigation. Finally, these FNMs can serve as one of the central elements of the presentation and explanation of the Descriptive Conceptual Geosphere Model (DCM) to other interested parties, including non-technical audiences. In addition to being ideally suited to preliminary site characterisation, the approach also readily incorporates field data that may become available during subsequent site investigations, including ground reconnaissance, borehole programmes and other subsurface studies. A single approach can therefore serve the needs of the site characterisation from its inception through several years of data collection and more detailed site-specific investigations, accommodating new data as they become available and updating the FNMs accordingly. The FNMs from this method are probabilistic in the sense that

Integrated city as a model for a new wave urban tourism

Science.gov (United States)

Ariani, V.

2018-03-01

Cities are a major player for an urban tourism destination. Massive tourism movement for urban tourism gains competitiveness to the city with similar characteristic. The new framework model for new wave urban tourism is crucial to give more experience to the tourist and valuing for the city itself. The integrated city is the answer for creating a new model for an urban tourism destination. The purpose of this preliminary research is to define integrated city framework for urban tourism development. It provides a rationale for tourism planner pursuing an innovative approach, competitive advantages, and general urban tourism destination model. The methodology applies to this research includes desk survey, literature review and focus group discussion. A conceptual framework is proposed, discussed and exemplified. The framework model adopts a place-based approach to tourism destination and suggests an integrated city model for urban tourism development. This model is a tool for strategy making in re-invention integrated city as an urban tourism destination.

Path-integral approach to resonant electron-molecule scattering

International Nuclear Information System (INIS)

Winterstetter, M.; Domcke, W.

1993-01-01

A path-integral formulation of resonant electron-molecule scattering is developed within the framework of the projection-operator formalism of scattering theory. The formation and decay of resonances is treated in real time as a quantum-mechanical electronic-tunneling process, modified by the coupling of the electronic motion with the nuclear degrees of freedom. It is shown that the electronic continuum can be summed over in the path-integral formulation, resulting formally in the path integral for an effective two-state system with coupling to vibrations. The harmonic-oscillator approximation is adopted for the vibrational motion in the present work. Approximation methods are introduced which render the numerical evaluation of the sum over paths feasible for up to ∼10 3 elementary time slices. The theory is numerically realized for simple but nontrivial models representing the 2 Π g d-wave shape resonance in e - +N 2 collisions and the 2 Σ u + p-wave shape resonance in e - +H 2 collisions, respectively. The accuracy of the path-integral results is assessed by comparison with exact numerical reference data for these models. The essential virtue of the path-integral approach is the fact that the computational effort scales at most linearly with the number of vibrational degrees of freedom. The path-integral method is thus well suited to treat electron collisions with polyatomic molecules and molecular aggregates

Designing the Distributed Model Integration Framework – DMIF

NARCIS (Netherlands)

Belete, Getachew F.; Voinov, Alexey; Morales, Javier

2017-01-01

We describe and discuss the design and prototype of the Distributed Model Integration Framework (DMIF) that links models deployed on different hardware and software platforms. We used distributed computing and service-oriented development approaches to address the different aspects of

Computer-aided operations engineering with integrated models of systems and operations

Science.gov (United States)

Malin, Jane T.; Ryan, Dan; Fleming, Land

1994-01-01

CONFIG 3 is a prototype software tool that supports integrated conceptual design evaluation from early in the product life cycle, by supporting isolated or integrated modeling, simulation, and analysis of the function, structure, behavior, failures and operation of system designs. Integration and reuse of models is supported in an object-oriented environment providing capabilities for graph analysis and discrete event simulation. Integration is supported among diverse modeling approaches (component view, configuration or flow path view, and procedure view) and diverse simulation and analysis approaches. Support is provided for integrated engineering in diverse design domains, including mechanical and electro-mechanical systems, distributed computer systems, and chemical processing and transport systems. CONFIG supports abstracted qualitative and symbolic modeling, for early conceptual design. System models are component structure models with operating modes, with embedded time-related behavior models. CONFIG supports failure modeling and modeling of state or configuration changes that result in dynamic changes in dependencies among components. Operations and procedure models are activity structure models that interact with system models. CONFIG is designed to support evaluation of system operability, diagnosability and fault tolerance, and analysis of the development of system effects of problems over time, including faults, failures, and procedural or environmental difficulties.

Developing a New Integrated Model to improve the using of Classical Approach in Designing Management Information Systems

OpenAIRE

Mohammad M M Abu Omar; Khairul Anuar Abdullah

2015-01-01

Management information system (MIS) is used to solve management problems in the practical life, the designing and building of the management information systems is done by using one of the systems development methodologies. Classical approach is one of these methodologies which still suffer from some critical problems when it is used in designing and building the management information systems, it consumes more time and cost during its life cycle. This paper develops a new integrated model to...

Data-driven integration of genome-scale regulatory and metabolic network models

Directory of Open Access Journals (Sweden)

Saheed eImam

2015-05-01

Full Text Available Microbes are diverse and extremely versatile organisms that play vital roles in all ecological niches. Understanding and harnessing microbial systems will be key to the sustainability of our planet. One approach to improving our knowledge of microbial processes is through data-driven and mechanism-informed computational modeling. Individual models of biological networks (such as metabolism, transcription and signaling have played pivotal roles in driving microbial research through the years. These networks, however, are highly interconnected and function in concert – a fact that has led to the development of a variety of approaches aimed at simulating the integrated functions of two or more network types. Though the task of integrating these different models is fraught with new challenges, the large amounts of high-throughput data sets being generated, and algorithms being developed, means that the time is at hand for concerted efforts to build integrated regulatory-metabolic networks in a data-driven fashion. In this perspective, we review current approaches for constructing integrated regulatory-metabolic models and outline new strategies for future development of these network models for any microbial system.

Integrated Systems-Based Approach for Reaching Acceptable End Points for Groundwater - 13629

International Nuclear Information System (INIS)

Lee, M. Hope; Wellman, Dawn; Truex, Mike; Freshley, Mark D.; Sorenson, Kent S. Jr.; Wymore, Ryan

2013-01-01

The sheer mass and nature of contaminated materials at DOE and DoD sites, makes it impractical to completely restore these sites to pre-disposal conditions. DOE faces long-term challenges, particularly with developing monitoring and end state approaches for clean-up that are protective of the environment, technically based and documented, sustainable, and most importantly cost effective. Integrated systems-based monitoring approaches (e.g., tools for characterization and monitoring, multi-component strategies, geophysical modeling) could provide novel approaches and a framework to (a) define risk-informed endpoints and/or conditions that constitute completion of cleanup and (b) provide the understanding for implementation of advanced scientific approaches to meet cleanup goals. Multi-component strategies which combine site conceptual models, biological, chemical, and physical remediation strategies, as well as iterative review and optimization have proven successful at several DOE sites. Novel tools such as enzyme probes and quantitative PCR for DNA and RNA, and innovative modeling approaches for complex subsurface environments, have been successful at facilitating the reduced operation or shutdown of pump and treat facilities and transition of clean-up activities into monitored natural attenuation remedies. Integrating novel tools with site conceptual models and other lines of evidence to characterize, optimize, and monitor long term remedial approaches for complex contaminant plumes are critical for transitioning active remediation into cost effective, yet technically defensible endpoint strategies. (authors)

A functional integral approach without slave bosons to the Anderson model

International Nuclear Information System (INIS)

Nguyen Ngoc Thuan; Nguyen Toan Thang; Coqblin, B.; Bhattacharjee, A.; Hoang Anh Tuan.

1994-06-01

We developed the technique of the functional integral method without slave bosons for the Periodic Anderson Model (PAM) suggested by Sarker for treating the Hubbard Model. This technique allowed us to obtain an analytical expression of Green functions containing U-dependence that is omitted in the formalism with slave bosons. (author). 9 refs

Contingent approach to Internet-based supply network integration

Science.gov (United States)

Ho, Jessica; Boughton, Nick; Kehoe, Dennis; Michaelides, Zenon

2001-10-01

The Internet is playing an increasingly important role in enhancing the operations of supply networks as many organizations begin to recognize the benefits of Internet- enabled supply arrangements. However, the developments and applications to-date do not extend significantly beyond the dyadic model, whereas the real advantages are to be made with the external and network models to support a coordinated and collaborative based approach. The DOMAIN research group at the University of Liverpool is currently defining new Internet- enabled approaches to enable greater collaboration across supply chains. Different e-business models and tools are focusing on different applications. Using inappropriate e- business models, tools or techniques will bring negative results instead of benefits to all the tiers in the supply network. Thus there are a number of issues to be considered before addressing Internet based supply network integration, in particular an understanding of supply chain management, the emergent business models and evaluating the effects of deploying e-business to the supply network or a particular tier. It is important to utilize a contingent approach to selecting the right e-business model to meet the specific supply chain requirements. This paper addresses the issues and provides a case study on the indirect materials supply networks.

The 5C model: A new approach to asset integrity management

International Nuclear Information System (INIS)

Rahim, Yousif; Refsdal, Ingbjorn; Kenett, Ron S.

2010-01-01

As organizations grow more complex in operation and more global in scope, assets and technical integrity become key success factors. A company's asset integrity business process needs to be mapped in order to 1) provide a proper overview of operation and business processes, 2) identify all critical interfaces and 3) ensure that all gaps and overlaps in processes are eliminated. Achieving asset integrity requires companies to sustain their activities and identify the hazards, weaknesses and objectives of their strategic assets. Technical integrity emphasizes a complete overview of technical conditions and related information, and the ability of the companies to document the technical state of its assets. It is based on an integrated view of the current state of operations, and the identification of all critical interfaces, in order to ensure that all gaps and unnecessary overlaps in processes are eliminated. Companies look increasingly at their asset integrity management system as a means to extend the life of their assets, beyond the original design conditions and production capacity. Establishing an asset integrity management system requires the documentation of the company's technical integrity management, a strategy and the processes for carrying it out, identifying gaps; selecting corrective interventions and conducting follow up actions. The paper discusses various aspects of asset integrity management, including its planning and implementation. We begin with an introduction to asset technical integrity, provide some theoretical backgrounds, present a model we call 5C and conclude with a summary and discussion.

MoGIRE: A Model for Integrated Water Management

Science.gov (United States)

Reynaud, A.; Leenhardt, D.

2008-12-01

Climate change and growing water needs have resulted in many parts of the world in water scarcity problems that must by managed by public authorities. Hence, policy-makers are more and more often asked to define and to implement water allocation rules between competitive users. This requires to develop new tools aiming at designing those rules for various scenarios of context (climatic, agronomic, economic). If models have been developed for each type of water use however, very few integrated frameworks link these different uses, while such an integrated approach is a relevant stake for designing regional water and land policies. The lack of such integrated models can be explained by the difficulty of integrating models developed by very different disciplines and by the problem of scale change (collecting data on large area, arbitrate between the computational tractability of models and their level of aggregation). However, modelers are more and more asked to deal with large basin scales while analyzing some policy impacts at very high detailed levels. These contradicting objectives require to develop new modeling tools. The CALVIN economically-driven optimization model developed for managing water in California is a good example of this type of framework, Draper et al. (2003). Recent reviews of the literature on integrated water management at the basin level include Letcher et al. (2007) or Cai (2008). We present here an original framework for integrated water management at the river basin scale called MoGIRE ("Modèle pour la Gestion Intégrée de la Ressource en Eau"). It is intended to optimize water use at the river basin level and to evaluate scenarios (agronomic, climatic or economic) for a better planning of agricultural and non-agricultural water use. MoGIRE includes a nodal representation of the water network. Agricultural, urban and environmental water uses are also represented using mathematical programming and econometric approaches. The model then

Integrated multi-scale modelling and simulation of nuclear fuels

International Nuclear Information System (INIS)

Valot, C.; Bertolus, M.; Masson, R.; Malerba, L.; Rachid, J.; Besmann, T.; Phillpot, S.; Stan, M.

2015-01-01

This chapter aims at discussing the objectives, implementation and integration of multi-scale modelling approaches applied to nuclear fuel materials. We will first show why the multi-scale modelling approach is required, due to the nature of the materials and by the phenomena involved under irradiation. We will then present the multiple facets of multi-scale modelling approach, while giving some recommendations with regard to its application. We will also show that multi-scale modelling must be coupled with appropriate multi-scale experiments and characterisation. Finally, we will demonstrate how multi-scale modelling can contribute to solving technology issues. (authors)

Integrated design approach of the pebble BeD modular reactor using models

International Nuclear Information System (INIS)

Venter, Pieter J.; Mitchell, Mark N.

2007-01-01

The pebble bed modular reactor (PBMR) is the first pebble bed reactor that will be utilised in a high temperature direct Brayton cycle configuration. This implies that there are a number of unique features in the PBMR that extend from the German experience base. One of the challenges in the design of the PBMR is developing an understanding of the expected behaviour of the reactor through analyses and simulations and managing the integrated design process between the designers, the physicists and the analysts. This integrated design process is managed through model-based development work. Three-dimensional CAD models are constructed of the components and parts in the reactor. From the CAD models, CFD models, neutronic models, shielding models, FEM models and other thermodynamic models are derived. These models range from very simple models to extremely detailed and complex models. The models are used in legacy software as well as commercial off-the-shelf software. The different models are also used in code-to-code comparisons to verify the results. This paper will briefly discuss the different models and the interaction between the models, and how the models are used in the iterative design process that is used in the development of the reactor at PBMR

A Proposed Analytical Model for Integrated Pick-and-Sort Systems

Directory of Open Access Journals (Sweden)

Recep KIZILASLAN

2013-11-01

Full Text Available In this study we present an analytical approach for integration of order picking and sortation operations which are the most important, labour intensive and costly activity for warehouses. Main aim is to investigate order picking and sorting efficiencies under different design issues as a function of order wave size. Integrated analytical model is proposed to estimate the optimum order picking and order sortation efficiency. The model, which has been tested by simulations with different illustrative examples, calculates the optimum wave size that solves the trade-off between picking and sorting operations and makes the order picking and sortations efficiency maximum. Our model also allow system designer to predict the order picking and sorting capacity for different system configurations. This study presents an innovative approach for integrated warehouse operations.

An Integrated Computer-Aided Approach for Environmental Studies

DEFF Research Database (Denmark)

Gani, Rafiqul; Chen, Fei; Jaksland, Cecilia

1997-01-01

A general framework for an integrated computer-aided approach to solve process design, control, and environmental problems simultaneously is presented. Physicochemical properties and their relationships to the molecular structure play an important role in the proposed integrated approach. The sco...... and applicability of the integrated approach is highlighted through examples involving estimation of properties and environmental pollution prevention. The importance of mixture effects on some environmentally important properties is also demonstrated....

An Integrated Approach for Characterization of Uncertainty in Complex Best Estimate Safety Assessment

International Nuclear Information System (INIS)

Pourgol-Mohamad, Mohammad; Modarres, Mohammad; Mosleh, Ali

2013-01-01

This paper discusses an approach called Integrated Methodology for Thermal-Hydraulics Uncertainty Analysis (IMTHUA) to characterize and integrate a wide range of uncertainties associated with the best estimate models and complex system codes used for nuclear power plant safety analyses. Examples of applications include complex thermal hydraulic and fire analysis codes. In identifying and assessing uncertainties, the proposed methodology treats the complex code as a 'white box', thus explicitly treating internal sub-model uncertainties in addition to the uncertainties related to the inputs to the code. The methodology accounts for uncertainties related to experimental data used to develop such sub-models, and efficiently propagates all uncertainties during best estimate calculations. Uncertainties are formally analyzed and probabilistically treated using a Bayesian inference framework. This comprehensive approach presents the results in a form usable in most other safety analyses such as the probabilistic safety assessment. The code output results are further updated through additional Bayesian inference using any available experimental data, for example from thermal hydraulic integral test facilities. The approach includes provisions to account for uncertainties associated with user-specified options, for example for choices among alternative sub-models, or among several different correlations. Complex time-dependent best-estimate calculations are computationally intense. The paper presents approaches to minimize computational intensity during the uncertainty propagation. Finally, the paper will report effectiveness and practicality of the methodology with two applications to a complex thermal-hydraulics system code as well as a complex fire simulation code. In case of multiple alternative models, several techniques, including dynamic model switching, user-controlled model selection, and model mixing, are discussed. (authors)

The stress-reward-mentalizing model of depression: An integrative developmental cascade approach to child and adolescent depressive disorder based on the research domain criteria (RDoC) approach.

Science.gov (United States)

Luyten, Patrick; Fonagy, Peter

2017-10-09

The Research Domain Criteria (RDoC) propose a much-needed change in approach to the study of vulnerability factors implicated in mental disorders, shifting away from a categorical, disease-oriented model to a dimensional approach that focuses on underlying systems implicated in psychopathology. In this paper we illustrate this approach with a focus on the emergence of depression in childhood and adolescence. Based on evolutionary biological and developmental psychopathology considerations, we present an integrative developmental cascade model of depression that essentially suggests that depression emerges out of a three-pronged series of interacting impairments in the domains of stress regulation, reward, and mentalizing. We discuss the relation of these impairments to the five domains proposed by RDoC. We also focus on how this model may explain in large part the marked comorbidity of depression with other psychiatric disorders, as well as with functional somatic and somatic disorders. Limitations of this theoretical approach are discussed, as well as implications for the development, evaluation, and dissemination of interventions aimed at preventing or treating depression. Copyright © 2017 Elsevier Ltd. All rights reserved.

A Temporal-Causal Modelling Approach to Integrated Contagion and Network Change in Social Networks

NARCIS (Netherlands)

Blankendaal, Romy; Parinussa, Sarah; Treur, Jan

2016-01-01

This paper introduces an integrated temporal-causal model for dynamics in social networks addressing the contagion principle by which states are affected mutually, and both the homophily principle and the more-becomes-more principle by which connections are adapted over time. The integrated model

Novel CNS drug discovery and development approach: model-based integration to predict neuro-pharmacokinetics and pharmacodynamics.

Science.gov (United States)

de Lange, Elizabeth C M; van den Brink, Willem; Yamamoto, Yumi; de Witte, Wilhelmus E A; Wong, Yin Cheong

2017-12-01

CNS drug development has been hampered by inadequate consideration of CNS pharmacokinetic (PK), pharmacodynamics (PD) and disease complexity (reductionist approach). Improvement is required via integrative model-based approaches. Areas covered: The authors summarize factors that have played a role in the high attrition rate of CNS compounds. Recent advances in CNS research and drug discovery are presented, especially with regard to assessment of relevant neuro-PK parameters. Suggestions for further improvements are also discussed. Expert opinion: Understanding time- and condition dependent interrelationships between neuro-PK and neuro-PD processes is key to predictions in different conditions. As a first screen, it is suggested to use in silico/in vitro derived molecular properties of candidate compounds and predict concentration-time profiles of compounds in multiple compartments of the human CNS, using time-course based physiology-based (PB) PK models. Then, for selected compounds, one can include in vitro drug-target binding kinetics to predict target occupancy (TO)-time profiles in humans. This will improve neuro-PD prediction. Furthermore, a pharmaco-omics approach is suggested, providing multilevel and paralleled data on systems processes from individuals in a systems-wide manner. Thus, clinical trials will be better informed, using fewer animals, while also, needing fewer individuals and samples per individual for proof of concept in humans.

Science of Integrated Approaches to Natural Resources Management

Science.gov (United States)

Tengberg, Anna; Valencia, Sandra

2017-04-01

transitions towards sustainable management of natural resources should be harnessed and integrated into GEF's influencing models and theory of change, and be coupled with updated approaches for learning, adaptive management and scaling up.

A transdisciplinary approach for supporting the integration of ecosystem services into land and water management

Science.gov (United States)

Fatt Siew, Tuck; Döll, Petra

2015-04-01

Transdisciplinary approaches are useful for supporting integrated land and water management. However, the implementation of the approach in practice to facilitate the co-production of useable socio-hydrological (and -ecological) knowledge among scientists and stakeholders is challenging. It requires appropriate methods to bring individuals with diverse interests and needs together and to integrate their knowledge for generating shared perspectives/understanding, identifying common goals, and developing actionable management strategies. The approach and the methods need, particularly, to be adapted to the local political and socio-cultural conditions. To demonstrate how knowledge co-production and integration can be done in practice, we present a transdisciplinary approach which has been implemented and adapted for supporting land and water management that takes ecosystem services into account in an arid region in northwestern China. Our approach comprises three steps: (1) stakeholder analysis and interdisciplinary knowledge integration, (2) elicitation of perspectives of scientists and stakeholders, scenario development, and identification of management strategies, and (3) evaluation of knowledge integration and social learning. Our adapted approach has enabled interdisciplinary and cross-sectoral communication among scientists and stakeholders. Furthermore, the application of a combination of participatory methods, including actor modeling, Bayesian Network modeling, and participatory scenario development, has contributed to the integration of system, target, and transformation knowledge of involved stakeholders. The realization of identified management strategies is unknown because other important and representative decision makers have not been involved in the transdisciplinary research process. The contribution of our transdisciplinary approach to social learning still needs to be assessed.

AN INTEGRATED PHOTOGRAMMETRIC AND PHOTOCLINOMETRIC APPROACH FOR PIXEL-RESOLUTION 3D MODELLING OF LUNAR SURFACE

Directory of Open Access Journals (Sweden)

W. C. Liu

2018-04-01

Full Text Available High-resolution 3D modelling of lunar surface is important for lunar scientific research and exploration missions. Photogrammetry is known for 3D mapping and modelling from a pair of stereo images based on dense image matching. However dense matching may fail in poorly textured areas and in situations when the image pair has large illumination differences. As a result, the actual achievable spatial resolution of the 3D model from photogrammetry is limited by the performance of dense image matching. On the other hand, photoclinometry (i.e., shape from shading is characterised by its ability to recover pixel-wise surface shapes based on image intensity and imaging conditions such as illumination and viewing directions. More robust shape reconstruction through photoclinometry can be achieved by incorporating images acquired under different illumination conditions (i.e., photometric stereo. Introducing photoclinometry into photogrammetric processing can therefore effectively increase the achievable resolution of the mapping result while maintaining its overall accuracy. This research presents an integrated photogrammetric and photoclinometric approach for pixel-resolution 3D modelling of the lunar surface. First, photoclinometry is interacted with stereo image matching to create robust and spatially well distributed dense conjugate points. Then, based on the 3D point cloud derived from photogrammetric processing of the dense conjugate points, photoclinometry is further introduced to derive the 3D positions of the unmatched points and to refine the final point cloud. The approach is able to produce one 3D point for each image pixel within the overlapping area of the stereo pair so that to obtain pixel-resolution 3D models. Experiments using the Lunar Reconnaissance Orbiter Camera - Narrow Angle Camera (LROC NAC images show the superior performances of the approach compared with traditional photogrammetric technique. The results and findings from this

Integrative structural modeling with small angle X-ray scattering profiles

Directory of Open Access Journals (Sweden)

Schneidman-Duhovny Dina

2012-07-01

Full Text Available Abstract Recent technological advances enabled high-throughput collection of Small Angle X-ray Scattering (SAXS profiles of biological macromolecules. Thus, computational methods for integrating SAXS profiles into structural modeling are needed more than ever. Here, we review specifically the use of SAXS profiles for the structural modeling of proteins, nucleic acids, and their complexes. First, the approaches for computing theoretical SAXS profiles from structures are presented. Second, computational methods for predicting protein structures, dynamics of proteins in solution, and assembly structures are covered. Third, we discuss the use of SAXS profiles in integrative structure modeling approaches that depend simultaneously on several data types.

Mathematical Modeling Approaches in Plant Metabolomics.

Science.gov (United States)

Fürtauer, Lisa; Weiszmann, Jakob; Weckwerth, Wolfram; Nägele, Thomas

2018-01-01

The experimental analysis of a plant metabolome typically results in a comprehensive and multidimensional data set. To interpret metabolomics data in the context of biochemical regulation and environmental fluctuation, various approaches of mathematical modeling have been developed and have proven useful. In this chapter, a general introduction to mathematical modeling is presented and discussed in context of plant metabolism. A particular focus is laid on the suitability of mathematical approaches to functionally integrate plant metabolomics data in a metabolic network and combine it with other biochemical or physiological parameters.

Towards a 3d Spatial Urban Energy Modelling Approach

Science.gov (United States)

Bahu, J.-M.; Koch, A.; Kremers, E.; Murshed, S. M.

2013-09-01

Today's needs to reduce the environmental impact of energy use impose dramatic changes for energy infrastructure and existing demand patterns (e.g. buildings) corresponding to their specific context. In addition, future energy systems are expected to integrate a considerable share of fluctuating power sources and equally a high share of distributed generation of electricity. Energy system models capable of describing such future systems and allowing the simulation of the impact of these developments thus require a spatial representation in order to reflect the local context and the boundary conditions. This paper describes two recent research approaches developed at EIFER in the fields of (a) geo-localised simulation of heat energy demand in cities based on 3D morphological data and (b) spatially explicit Agent-Based Models (ABM) for the simulation of smart grids. 3D city models were used to assess solar potential and heat energy demand of residential buildings which enable cities to target the building refurbishment potentials. Distributed energy systems require innovative modelling techniques where individual components are represented and can interact. With this approach, several smart grid demonstrators were simulated, where heterogeneous models are spatially represented. Coupling 3D geodata with energy system ABMs holds different advantages for both approaches. On one hand, energy system models can be enhanced with high resolution data from 3D city models and their semantic relations. Furthermore, they allow for spatial analysis and visualisation of the results, with emphasis on spatially and structurally correlations among the different layers (e.g. infrastructure, buildings, administrative zones) to provide an integrated approach. On the other hand, 3D models can benefit from more detailed system description of energy infrastructure, representing dynamic phenomena and high resolution models for energy use at component level. The proposed modelling strategies

Object-Oriented Approach to Modeling Units of Pneumatic Systems

Directory of Open Access Journals (Sweden)

Yu. V. Kyurdzhiev

2014-01-01

Full Text Available The article shows the relevance of the approaches to the object-oriented programming when modeling the pneumatic units (PU.Based on the analysis of the calculation schemes of aggregates pneumatic systems two basic objects, namely a cavity flow and a material point were highlighted.Basic interactions of objects are defined. Cavity-cavity interaction: ex-change of matter and energy with the flows of mass. Cavity-point interaction: force interaction, exchange of energy in the form of operation. Point-point in-teraction: force interaction, elastic interaction, inelastic interaction, and inter-vals of displacement.The authors have developed mathematical models of basic objects and interactions. Models and interaction of elements are implemented in the object-oriented programming.Mathematical models of elements of PU design scheme are implemented in derived from the base class. These classes implement the models of flow cavity, piston, diaphragm, short channel, diaphragm to be open by a given law, spring, bellows, elastic collision, inelastic collision, friction, PU stages with a limited movement, etc.A numerical integration of differential equations for the mathematical models of PU design scheme elements is based on the Runge-Kutta method of the fourth order. On request each class performs a tact of integration i.e. calcu-lation of the coefficient method.The paper presents an integration algorithm of the system of differential equations. All objects of the PU design scheme are placed in a unidirectional class list. Iterator loop cycle initiates the integration tact of all the objects in the list. One in four iteration makes a transition to the next step of integration. Calculation process stops when any object shows a shutdowns flag.The proposed approach was tested in the calculation of a number of PU designs. With regard to traditional approaches to modeling, the authors-proposed method features in easy enhancement, code reuse, high reliability

Model integration and a theory of models

OpenAIRE

Dolk, Daniel R.; Kottemann, Jeffrey E.

1993-01-01

Model integration extends the scope of model management to include the dimension of manipulation as well. This invariably leads to comparisons with database theory. Model integration is viewed from four perspectives: Organizational, definitional, procedural, and implementational. Strategic modeling is discussed as the organizational motivation for model integration. Schema and process integration are examined as the logical and manipulation counterparts of model integr...

A design approach for integrating thermoelectric devices using topology optimization

International Nuclear Information System (INIS)

Soprani, S.; Haertel, J.H.K.; Lazarov, B.S.; Sigmund, O.; Engelbrecht, K.

2016-01-01

Highlights: • The integration of a thermoelectric (TE) cooler into a robotic tool is optimized. • Topology optimization is suggested as design tool for TE integrated systems. • A 3D optimization technique using temperature dependent TE properties is presented. • The sensitivity of the optimization process to the boundary conditions is studied. • A working prototype is constructed and compared to the model results. - Abstract: Efficient operation of thermoelectric devices strongly relies on the thermal integration into the energy conversion system in which they operate. Effective thermal integration reduces the temperature differences between the thermoelectric module and its thermal reservoirs, allowing the system to operate more efficiently. This work proposes and experimentally demonstrates a topology optimization approach as a design tool for efficient integration of thermoelectric modules into systems with specific design constraints. The approach allows thermal layout optimization of thermoelectric systems for different operating conditions and objective functions, such as temperature span, efficiency, and power recovery rate. As a specific application, the integration of a thermoelectric cooler into the electronics section of a downhole oil well intervention tool is investigated, with the objective of minimizing the temperature of the cooled electronics. Several challenges are addressed: ensuring effective heat transfer from the load, minimizing the thermal resistances within the integrated system, maximizing the thermal protection of the cooled zone, and enhancing the conduction of the rejected heat to the oil well. The design method incorporates temperature dependent properties of the thermoelectric device and other materials. The 3D topology optimization model developed in this work was used to design a thermoelectric system, complete with insulation and heat sink, that was produced and tested. Good agreement between experimental results and

A Comparative Study on Sugeno Integral Approach to Aggregation of Experts' Opinion

International Nuclear Information System (INIS)

Kim, Seong Ho; Kim, Kil Yoo; Kim, Tae Woon

2007-01-01

A multicriteria decision-making (MCDM) problem of preference ranking of various alternatives is common in science and engineering fields. Usually, the MCDM problem is characterized in terms of two factors: relative importance of each evaluation criterion and appropriateness of each alternative. The ranking is determined by a relative degree of appropriateness of decision alternatives. In reality, there are different grades of interaction among decision criteria. One of well-known approaches to aggregation of those two factors is the weighted arithmetic mean (WAM) approach. Here, importance weights for criteria are viewed as probability measures. The weights are linearly aggregated with appropriateness values. In the present work, the main objective is to study an aggregation model with various grades of interactions among the decision elements. The successful applications of fuzzy integral aggregation operators to subjective MCDM problems have been motivating this work. On the basis of λ-fuzzy measures and Sugeno integral (SI), the SI aggregation approach is proposed. Here, interaction among criteria is dealt with λ-fuzzy measures. Aggregation of these measures and appropriateness values is implemented, especially, by the Sugeno integral as one of fuzzy integrals. Aggregated values obtained by the SI approach are viewed as decision maker's pessimistic (or conservative) attitude towards information aggregation, compared to the WAM approach. Firstly, the concepts of the λ-fuzzy measure and the Sugeno fuzzy integral are introduced. Then, as an application of the SI approach, an illustrative example is given

Development of flexible process-centric web applications: An integrated model driven approach

NARCIS (Netherlands)

Bernardi, M.L.; Cimitile, M.; Di Lucca, G.A.; Maggi, F.M.

2012-01-01

In recent years, Model Driven Engineering (MDE) approaches have been proposed and used to develop and evolve WAs. However, the definition of appropriate MDE approaches for the development of flexible process-centric WAs is still limited. In particular, (flexible) workflow models have never been

Integrated approach to economical, reliable, safe nuclear power production

International Nuclear Information System (INIS)

1982-06-01

An Integrated Approach to Economical, Reliable, Safe Nuclear Power Production is the latest evolution of a concept which originated with the Defense-in-Depth philosophy of the nuclear industry. As Defense-in-Depth provided a framework for viewing physical barriers and equipment redundancy, the Integrated Approach gives a framework for viewing nuclear power production in terms of functions and institutions. In the Integrated Approach, four plant Goals are defined (Normal Operation, Core and Plant Protection, Containment Integrity and Emergency Preparedness) with the attendant Functional and Institutional Classifications that support them. The Integrated Approach provides a systematic perspective that combines the economic objective of reliable power production with the safety objective of consistent, controlled plant operation

Healing and Preventing Pain: Complementary and Integrative Approaches

Science.gov (United States)

... page please turn JavaScript on. Feature: Pain Management Healing and Preventing Pain, Complementary and Integrative Approaches Past ... Pain Management" Articles Putting A Pause In Pain / Healing and Preventing Pain Complementary and Integrative Approaches / Pain ...

Computational Approaches for Integrative Analysis of the Metabolome and Microbiome

Directory of Open Access Journals (Sweden)

Jasmine Chong

2017-11-01

Full Text Available The study of the microbiome, the totality of all microbes inhabiting the host or an environmental niche, has experienced exponential growth over the past few years. The microbiome contributes functional genes and metabolites, and is an important factor for maintaining health. In this context, metabolomics is increasingly applied to complement sequencing-based approaches (marker genes or shotgun metagenomics to enable resolution of microbiome-conferred functionalities associated with health. However, analyzing the resulting multi-omics data remains a significant challenge in current microbiome studies. In this review, we provide an overview of different computational approaches that have been used in recent years for integrative analysis of metabolome and microbiome data, ranging from statistical correlation analysis to metabolic network-based modeling approaches. Throughout the process, we strive to present a unified conceptual framework for multi-omics integration and interpretation, as well as point out potential future directions.

Modeling alcohol use disorder severity: an integrative structural equation modeling approach

Directory of Open Access Journals (Sweden)

Nathasha R Moallem

2013-07-01

Full Text Available Background: Alcohol dependence is a complex psychological disorder whose phenomenology changes as the disorder progresses. Neuroscience has provided a variety of theories and evidence for the development, maintenance, and severity of addiction; however, clinically, it has been difficult to evaluate alcohol use disorder (AUD severity. Objective: This study seeks to evaluate and validate a data-driven approach to capturing alcohol severity in a community sample. Method: Participants were non-treatment seeking problem drinkers (n = 283. A structural equation modeling (SEM approach was used to (a verify the latent factor structure of the indices of AUD severity; and (b test the relationship between the AUD severity factor and measures of alcohol use, affective symptoms, and motivation to change drinking. Results: The model was found to fit well, with all chosen indices of AUD severity loading significantly and positively onto the severity factor. In addition, the paths from the alcohol use, motivation, and affective factors accounted for 68% of the variance in AUD severity. Greater AUD severity was associated with greater alcohol use, increased affective symptoms, and higher motivation to change.Conclusions: Unlike the categorical diagnostic criteria, the AUD severity factor is comprised of multiple quantitative dimensions of impairment observed across the progression of the disorder. The AUD severity factor was validated by testing it in relation to other outcomes such as alcohol use, affective symptoms, and motivation for change. Clinically, this approach to AUD severity can be used to inform treatment planning and ultimately to improve outcomes.

An object-oriented language-database integration model: The composition filters approach

NARCIS (Netherlands)

Aksit, Mehmet; Bergmans, Lodewijk; Vural, Sinan; Vural, S.

1991-01-01

This paper introduces a new model, based on so-called object-composition filters, that uniformly integrates database-like features into an object-oriented language. The focus is on providing persistent dynamic data structures, data sharing, transactions, multiple views and associative access,

An Object-Oriented Language-Database Integration Model: The Composition-Filters Approach

NARCIS (Netherlands)

Aksit, Mehmet; Bergmans, Lodewijk; Vural, S.; Vural, Sinan; Lehrmann Madsen, O.

1992-01-01

This paper introduces a new model, based on so-called object-composition filters, that uniformly integrates database-like features into an object-oriented language. The focus is on providing persistent dynamic data structures, data sharing, transactions, multiple views and associative access,

A System Dynamics Model for Integrated Decision Making ...

Science.gov (United States)

EPA’s Sustainable and Healthy Communities Research Program (SHC) is conducting transdisciplinary research to inform and empower decision-makers. EPA tools and approaches are being developed to enable communities to effectively weigh and integrate human health, socioeconomic, environmental, and ecological factors into their decisions to promote community sustainability. To help achieve this goal, EPA researchers have developed systems approaches to account for the linkages among resources, assets, and outcomes managed by a community. System dynamics (SD) is a member of the family of systems approaches and provides a framework for dynamic modeling that can assist with assessing and understanding complex issues across multiple dimensions. To test the utility of such tools when applied to a real-world situation, the EPA has developed a prototype SD model for community sustainability using the proposed Durham-Orange Light Rail Project (D-O LRP) as a case study.The EPA D-O LRP SD modeling team chose the proposed D-O LRP to demonstrate that an integrated modeling approach could represent the multitude of related cross-sectoral decisions that would be made and the cascading impacts that could result from a light rail transit system connecting Durham and Chapel Hill, NC. In keeping with the SHC vision described above, the proposal for the light rail is a starting point solution for the more intractable problems of population growth, unsustainable land use, environmenta

Integrated Surface/subsurface flow modeling in PFLOTRAN

Energy Technology Data Exchange (ETDEWEB)

Painter, Scott L [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2016-10-01

Understanding soil water, groundwater, and shallow surface water dynamics as an integrated hydrological system is critical for understanding the Earth’s critical zone, the thin outer layer at our planet’s surface where vegetation, soil, rock, and gases interact to regulate the environment. Computational tools that take this view of soil moisture and shallow surface flows as a single integrated system are typically referred to as integrated surface/subsurface hydrology models. We extend the open-source, highly parallel, subsurface flow and reactive transport simulator PFLOTRAN to accommodate surface flows. In contrast to most previous implementations, we do not represent a distinct surface system. Instead, the vertical gradient in hydraulic head at the land surface is neglected, which allows the surface flow system to be eliminated and incorporated directly into the subsurface system. This tight coupling approach leads to a robust capability and also greatly simplifies implementation in existing subsurface simulators such as PFLOTRAN. Successful comparisons to independent numerical solutions build confidence in the approximation and implementation. Example simulations of the Walker Branch and East Fork Poplar Creek watersheds near Oak Ridge, Tennessee demonstrate the robustness of the approach in geometrically complex applications. The lack of a robust integrated surface/subsurface hydrology capability had been a barrier to PFLOTRAN’s use in critical zone studies. This work addresses that capability gap, thus enabling PFLOTRAN as a community platform for building integrated models of the critical zone.

An integrated ethical approach to bioethical decision-making: A proposed model for ministers

Directory of Open Access Journals (Sweden)

Magdalena C. de Lange

2012-10-01

Full Text Available This article outlined a model for guidance in ‘doing’ bioethics in a Reformed context. The proposed model suggested that in order to arrive at responsible ethical decisions, one must refer to both contextual elements and theory. The theoretical grounding for this model was based on the integration of a deontological and virtue ethics approach, arguing that virtue enables persons to know and desire the right moral ends and motivates them to carry out appropriate action toward achieving these ends. An integrative model opens up the possibility whereby bioethics as a systematic tool provides the individual decision-maker with the critical-reflective skills and justification for the ultimate choice that is lacking in the general decision-making processes. This could lead to clearer thinking and increased confidence in the justification of decisions within the Reformed tradition. The proposed hermeneutical perspective on ethical decision-making represents a shift in views about the nature of knowledge and the process of how we come to know. The key to this hermeneutical approach is to acknowledge the dialectic between the universal and the subjectivity of human relations. Working in specific religious communities, one needs to take cognisance of the fact that knowledge is situated in the context of human relationships in which the interpreter participates when articulating the meaning of bioethical experiences. Another aspect that is anticipated lies in the realisation that people struggling with bioethical dilemmas should not be viewed as isolated individuals, but as members of a broader faith community. ‘n Geïntegreerde etiese benadering tot bioetiese besluitneming: Voorgestelde model vir predikante. Hierdie artikel het ‘n model geskets wat moontlike riglyne aantoon vir die  beoefening  van  bioetiek  binne  ‘n  Gereformeerde  konteks.  Die  voorgestelde  model argumenteer dat verwysing na beide kontekstuele elemente en teorie

What can a participatory approach to evaluation contribute to the field of integrated care?

Science.gov (United States)

Eyre, Laura; Farrelly, Michael; Marshall, Martin

2017-07-01

Better integration of care within the health sector and between health and social care is seen in many countries as an essential way of addressing the enduring problems of dwindling resources, changing demographics and unacceptable variation in quality of care. Current research evidence about the effectiveness of integration efforts supports neither the enthusiasm of those promoting and designing integrated care programmes nor the growing efforts of practitioners attempting to integrate care on the ground. In this paper we present a methodological approach, based on the principles of participatory research, that attempts to address this challenge. Participatory approaches are characterised by a desire to use social science methods to solve practical problems and a commitment on the part of researchers to substantive and sustained collaboration with relevant stakeholders. We describe how we applied an emerging practical model of participatory research, the researcher-in-residence model, to evaluate a large-scale integrated care programme in the UK. We propose that the approach added value to the programme in a number of ways: by engaging stakeholders in using established evidence and with the benefits of rigorously evaluating their work, by providing insights for local stakeholders that they were either not familiar with or had not fully considered in relation to the development and implementation of the programme and by challenging established mindsets and norms. While there is still much to learn about the benefits and challenges of applying participatory approaches in the health sector, we demonstrate how using such approaches have the potential to help practitioners integrate care more effectively in their daily practice and help progress the academic study of integrated care. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

Object-oriented integrated approach for the design of scalable ECG systems.

Science.gov (United States)

Boskovic, Dusanka; Besic, Ingmar; Avdagic, Zikrija

2009-01-01

The paper presents the implementation of Object-Oriented (OO) integrated approaches to the design of scalable Electro-Cardio-Graph (ECG) Systems. The purpose of this methodology is to preserve real-world structure and relations with the aim to minimize the information loss during the process of modeling, especially for Real-Time (RT) systems. We report on a case study of the design that uses the integration of OO and RT methods and the Unified Modeling Language (UML) standard notation. OO methods identify objects in the real-world domain and use them as fundamental building blocks for the software system. The gained experience based on the strongly defined semantics of the object model is discussed and related problems are analyzed.

Integrated modeling and analysis methodology for precision pointing applications

Science.gov (United States)

Gutierrez, Homero L.

2002-07-01

Space-based optical systems that perform tasks such as laser communications, Earth imaging, and astronomical observations require precise line-of-sight (LOS) pointing. A general approach is described for integrated modeling and analysis of these types of systems within the MATLAB/Simulink environment. The approach can be applied during all stages of program development, from early conceptual design studies to hardware implementation phases. The main objective is to predict the dynamic pointing performance subject to anticipated disturbances and noise sources. Secondary objectives include assessing the control stability, levying subsystem requirements, supporting pointing error budgets, and performing trade studies. The integrated model resides in Simulink, and several MATLAB graphical user interfaces (GUI"s) allow the user to configure the model, select analysis options, run analyses, and process the results. A convenient parameter naming and storage scheme, as well as model conditioning and reduction tools and run-time enhancements, are incorporated into the framework. This enables the proposed architecture to accommodate models of realistic complexity.

Integrating systems biology models and biomedical ontologies.

Science.gov (United States)

Hoehndorf, Robert; Dumontier, Michel; Gennari, John H; Wimalaratne, Sarala; de Bono, Bernard; Cook, Daniel L; Gkoutos, Georgios V

2011-08-11

Systems biology is an approach to biology that emphasizes the structure and dynamic behavior of biological systems and the interactions that occur within them. To succeed, systems biology crucially depends on the accessibility and integration of data across domains and levels of granularity. Biomedical ontologies were developed to facilitate such an integration of data and are often used to annotate biosimulation models in systems biology. We provide a framework to integrate representations of in silico systems biology with those of in vivo biology as described by biomedical ontologies and demonstrate this framework using the Systems Biology Markup Language. We developed the SBML Harvester software that automatically converts annotated SBML models into OWL and we apply our software to those biosimulation models that are contained in the BioModels Database. We utilize the resulting knowledge base for complex biological queries that can bridge levels of granularity, verify models based on the biological phenomenon they represent and provide a means to establish a basic qualitative layer on which to express the semantics of biosimulation models. We establish an information flow between biomedical ontologies and biosimulation models and we demonstrate that the integration of annotated biosimulation models and biomedical ontologies enables the verification of models as well as expressive queries. Establishing a bi-directional information flow between systems biology and biomedical ontologies has the potential to enable large-scale analyses of biological systems that span levels of granularity from molecules to organisms.

Uncertainty management in integrated modelling, the IMAGE case

International Nuclear Information System (INIS)

Van der Sluijs, J.P.

1995-01-01

Integrated assessment models of global environmental problems play an increasingly important role in decision making. This use demands a good insight regarding the reliability of these models. In this paper we analyze uncertainty management in the IMAGE-project (Integrated Model to Assess the Greenhouse Effect). We use a classification scheme comprising type and source of uncertainty. Our analysis shows reliability analysis as main area for improvement. We briefly review a recently developed methodology, NUSAP (Numerical, Unit, Spread, Assessment and Pedigree), that systematically addresses the strength of data in terms of spread, reliability and scientific status (pedigree) of information. This approach is being tested through interviews with model builders. 3 tabs., 20 refs

Integration a functional approach

CERN Document Server

Bichteler, Klaus

1998-01-01

This book covers Lebesgue integration and its generalizations from Daniell's point of view, modified by the use of seminorms. Integrating functions rather than measuring sets is posited as the main purpose of measure theory. From this point of view Lebesgue's integral can be had as a rather straightforward, even simplistic, extension of Riemann's integral; and its aims, definitions, and procedures can be motivated at an elementary level. The notion of measurability, for example, is suggested by Littlewood's observations rather than being conveyed authoritatively through definitions of (sigma)-algebras and good-cut-conditions, the latter of which are hard to justify and thus appear mysterious, even nettlesome, to the beginner. The approach taken provides the additional benefit of cutting the labor in half. The use of seminorms, ubiquitous in modern analysis, speeds things up even further. The book is intended for the reader who has some experience with proofs, a beginning graduate student for example. It might...

An integrated graphic–taxonomic–associative approach to analyze human factors in aviation accidents

Directory of Open Access Journals (Sweden)

Gong Lei

2014-04-01

Full Text Available Human factors are critical causes of modern aviation accidents. However, existing accident analysis methods encounter limitations in addressing aviation human factors, especially in complex accident scenarios. The existing graphic approaches are effective for describing accident mechanisms within various categories of human factors, but cannot simultaneously describe inadequate human–aircraft–environment interactions and organizational deficiencies effectively, and highly depend on analysts’ skills and experiences. Moreover, the existing methods do not emphasize latent unsafe factors outside accidents. This paper focuses on the above three limitations and proposes an integrated graphic–taxonomic–associative approach. A new graphic model named accident tree (AcciTree, with a two-mode structure and a reaction-based concept, is developed for accident modeling and safety defense identification. The AcciTree model is then integrated with the well-established human factors analysis and classification system (HFACS to enhance both reliability of the graphic part and logicality of the taxonomic part for improving completeness of analysis. An associative hazard analysis technique is further put forward to extend analysis to factors outside accidents, to form extended safety requirements for proactive accident prevention. Two crash examples, a research flight demonstrator by our team and an industrial unmanned aircraft, illustrate that the integrated approach is effective for identifying more unsafe factors and safety requirements.

An Integrated Constraint Programming Approach to Scheduling Sports Leagues with Divisional and Round-robin Tournaments

Energy Technology Data Exchange (ETDEWEB)

Carlsson, Mats; Johansson, Mikael; Larson, Jeffrey

2014-01-01

Previous approaches for scheduling a league with round-robin and divisional tournaments involved decomposing the problem into easier subproblems. This approach, used to schedule the top Swedish handball league Elitserien, reduces the problem complexity but can result in suboptimal schedules. This paper presents an integrated constraint programming model that allows to perform the scheduling in a single step. Particular attention is given to identifying implied and symmetry-breaking constraints that reduce the computational complexity significantly. The experimental evaluation of the integrated approach takes considerably less computational effort than the previous approach.

Conceptual integrated approach for the magnet system of a tokamak reactor

International Nuclear Information System (INIS)

Duchateau, J.-L.; Hertout, P.; Saoutic, B.; Artaud, J.-F.; Zani, L.; Reux, C.

2014-01-01

Highlights: • We give a conceptual approach of a fusion reactor magnet system based on analytical formula. • We give design criteria for the CS and TF cable in conduit conductors and for the magnet system structural description. • We apply this conceptual approach to ITER and we crosscheck with actual characteristics. • We apply this conceptual approach to a possible version of DEMO. - Abstract: In the framework of the reflexion about DEMO, a conceptual integrated approach for the magnet system of a tokamak reactor is presented. This objective is reached using analytical formulas which are presented in this paper, coupled to a Fortran code ESCORT (Electromagnetic Superconducting System for the Computation of Research Tokamaks), to be integrated into SYCOMORE, a code for reactor modelling presently in development at CEA/IRFM in Cadarache, using the tools of the EFDA Integrated Tokamak Modelling task force. The analytical formulas deal with all aspects of the magnet system, starting from the derivation of the TF system general geometry, from the plasma main characteristics. The design criteria for the cable current density and the structural design of the toroidal field and central solenoid systems are presented, enabling to deliver the radial thicknesses of the magnets and enabling also to estimate the plasma duration of the plateau. As a matter of fact, a pulsed version DEMO is presently actively considered in the European programmes. Considerations regarding the cryogenics and the protection are given, affecting the general design. An application of the conceptual approach is presented, allowing a comparison between ESCORT output data and actual ITER parameters and giving the main characteristics of a possible version for DEMO

Fully integrated modelling for sustainability assessment of resource recovery from waste.

Science.gov (United States)

Millward-Hopkins, Joel; Busch, Jonathan; Purnell, Phil; Zwirner, Oliver; Velis, Costas A; Brown, Andrew; Hahladakis, John; Iacovidou, Eleni

2018-01-15

This paper presents an integrated modelling approach for value assessments, focusing on resource recovery from waste. The method tracks and forecasts a range of values across environmental, social, economic and technical domains by attaching these to material-flows, thus building upon and integrating unidimensional models such as material flow analysis (MFA) and lifecycle assessment (LCA). We argue that the usual classification of metrics into these separate domains is useful for interpreting the outputs of multidimensional assessments, but unnecessary for modelling. We thus suggest that multidimensional assessments can be better performed by integrating the calculation methods of unidimensional models rather than their outputs. To achieve this, we propose a new metric typology that forms the foundation of a multidimensional model. This enables dynamic simulations to be performed with material-flows (or values in any domain) driven by changes in value in other domains. We then apply the model in an illustrative case highlighting links between the UK coal-based electricity-production and concrete/cement industries, investigating potential impacts that may follow the increased use of low-carbon fuels (biomass and solid recovered fuels; SRF) in the former. We explore synergies and trade-offs in value across domains and regions, e.g. how changes in carbon emissions in one part of the system may affect mortality elsewhere. This highlights the advantages of recognising complex system dynamics and making high-level inferences of their effects, even when rigorous analysis is not possible. We also indicate how changes in social, environmental and economic 'values' can be understood as being driven by changes in the technical value of resources. Our work thus emphasises the advantages of building fully integrated models to inform conventional sustainability assessments, rather than applying hybrid approaches that integrate outputs from parallel models. The approach we

A dynamic multimedia fuzzy-stochastic integrated environmental risk assessment approach for contaminated sites management

Energy Technology Data Exchange (ETDEWEB)

Hu, Yan; Wen, Jing-ya; Li, Xiao-li; Wang, Da-zhou; Li, Yu, E-mail: liyuxx8@hotmail.com

2013-10-15

Highlights: • Using interval mathematics to describe spatial and temporal variability and parameter uncertainty. • Using fuzzy theory to quantify variability of environmental guideline values. • Using probabilistic approach to integrate interval concentrations and fuzzy environmental guideline. • Establishment of dynamic multimedia environmental integrated risk assessment framework. -- Abstract: A dynamic multimedia fuzzy-stochastic integrated environmental risk assessment approach was developed for contaminated sites management. The contaminant concentrations were simulated by a validated interval dynamic multimedia fugacity model, and different guideline values for the same contaminant were represented as a fuzzy environmental guideline. Then, the probability of violating environmental guideline (Pv) can be determined by comparison between the modeled concentrations and the fuzzy environmental guideline, and the constructed relationship between the Pvs and environmental risk levels was used to assess the environmental risk level. The developed approach was applied to assess the integrated environmental risk at a case study site in China, simulated from 1985 to 2020. Four scenarios were analyzed, including “residential land” and “industrial land” environmental guidelines under “strict” and “loose” strictness. It was found that PAH concentrations will increase steadily over time, with soil found to be the dominant sink. Source emission in soil was the leading input and atmospheric sedimentation was the dominant transfer process. The integrated environmental risks primarily resulted from petroleum spills and coke ovens, while the soil environmental risks came from coal combustion. The developed approach offers an effective tool for quantifying variability and uncertainty in the dynamic multimedia integrated environmental risk assessment and the contaminated site management.

A dynamic multimedia fuzzy-stochastic integrated environmental risk assessment approach for contaminated sites management

International Nuclear Information System (INIS)

Hu, Yan; Wen, Jing-ya; Li, Xiao-li; Wang, Da-zhou; Li, Yu

2013-01-01

Highlights: • Using interval mathematics to describe spatial and temporal variability and parameter uncertainty. • Using fuzzy theory to quantify variability of environmental guideline values. • Using probabilistic approach to integrate interval concentrations and fuzzy environmental guideline. • Establishment of dynamic multimedia environmental integrated risk assessment framework. -- Abstract: A dynamic multimedia fuzzy-stochastic integrated environmental risk assessment approach was developed for contaminated sites management. The contaminant concentrations were simulated by a validated interval dynamic multimedia fugacity model, and different guideline values for the same contaminant were represented as a fuzzy environmental guideline. Then, the probability of violating environmental guideline (Pv) can be determined by comparison between the modeled concentrations and the fuzzy environmental guideline, and the constructed relationship between the Pvs and environmental risk levels was used to assess the environmental risk level. The developed approach was applied to assess the integrated environmental risk at a case study site in China, simulated from 1985 to 2020. Four scenarios were analyzed, including “residential land” and “industrial land” environmental guidelines under “strict” and “loose” strictness. It was found that PAH concentrations will increase steadily over time, with soil found to be the dominant sink. Source emission in soil was the leading input and atmospheric sedimentation was the dominant transfer process. The integrated environmental risks primarily resulted from petroleum spills and coke ovens, while the soil environmental risks came from coal combustion. The developed approach offers an effective tool for quantifying variability and uncertainty in the dynamic multimedia integrated environmental risk assessment and the contaminated site management

Interventions to Promote an Integrated Approach to Public Health Problems: An Application to Childhood Obesity

Directory of Open Access Journals (Sweden)

Anna-Marie Hendriks

2012-01-01

Full Text Available Experts stress the need to bring the childhood obesity epidemic under control by means of an integrated approach. The implementation of such an approach requires the development of integrated enabling policies on public health by local governments. A prerequisite for developing such integrated public health policies is intersectoral collaboration. Since the development of integrated policies is still in its early stages, this study aimed to answer the following research question: “What interventions can promote intersectoral collaboration and the development of integrated health policies for the prevention of childhood obesity?” Data were collected through a literature search and observations of and interviews with stakeholders. Based on a theoretical framework, we categorized potential interventions that could optimize an integrated approach regarding children's physical activity and diet. The intervention categories included education, persuasion, incentivization, coercion, training, restriction, environmental restructuring, modeling, and enablement.

Mechatronics by bond graphs an object-oriented approach to modelling and simulation

CERN Document Server

Damić, Vjekoslav

2015-01-01

This book presents a computer-aided approach to the design of mechatronic systems. Its subject is an integrated modeling and simulation in a visual computer environment. Since the first edition, the simulation software changed enormously, became more user-friendly and easier to use. Therefore, a second edition became necessary taking these improvements into account. The modeling is based on system top-down and bottom-up approach. The mathematical models are generated in a form of differential-algebraic equations and solved using numerical and symbolic algebra methods. The integrated approach developed is applied to mechanical, electrical and control systems, multibody dynamics, and continuous systems. .

A multiple choice decision analysis: an integrated QFD – AHP model ...

African Journals Online (AJOL)

The aim of this work is to propose a new methodological approach to define customer specifications through the employment of an integrated Quality Function Deployment (QFD) – Analytic Hierarchy Process (AHP) model. The model, which is loosely based on QFD, incorporates the AHP approach to delineate and rank the ...

Location optimization of solar plants by an integrated hierarchical DEA PCA approach

International Nuclear Information System (INIS)

Azadeh, A.; Ghaderi, S.F.; Maghsoudi, A.

2008-01-01

Unique features of renewable energies such as solar energy has caused increasing demands for such resources. In order to use solar energy as a natural resource, environmental circumstances and geographical location related to solar intensity must be considered. Different factors may affect on the selection of a suitable location for solar plants. These factors must be considered concurrently for optimum location identification of solar plants. This article presents an integrated hierarchical approach for location of solar plants by data envelopment analysis (DEA), principal component analysis (PCA) and numerical taxonomy (NT). Furthermore, an integrated hierarchical DEA approach incorporating the most relevant parameters of solar plants is introduced. Moreover, 2 multivariable methods namely, PCA and NT are used to validate the results of DEA model. The prescribed approach is tested for 25 different cities in Iran with 6 different regions within each city. This is the first study that considers an integrated hierarchical DEA approach for geographical location optimization of solar plants. Implementation of the proposed approach would enable the energy policy makers to select the best-possible location for construction of a solar power plant with lowest possible costs

Technical Note: Reducing the spin-up time of integrated surface water–groundwater models

KAUST Repository

Ajami, H.

2014-12-12

One of the main challenges in the application of coupled or integrated hydrologic models is specifying a catchment\\'s initial conditions in terms of soil moisture and depth-to-water table (DTWT) distributions. One approach to reducing uncertainty in model initialization is to run the model recursively using either a single year or multiple years of forcing data until the system equilibrates with respect to state and diagnostic variables. However, such "spin-up" approaches often require many years of simulations, making them computationally intensive. In this study, a new hybrid approach was developed to reduce the computational burden of the spin-up procedure by using a combination of model simulations and an empirical DTWT function. The methodology is examined across two distinct catchments located in a temperate region of Denmark and a semi-arid region of Australia. Our results illustrate that the hybrid approach reduced the spin-up period required for an integrated groundwater–surface water–land surface model (ParFlow.CLM) by up to 50%. To generalize results to different climate and catchment conditions, we outline a methodology that is applicable to other coupled or integrated modeling frameworks when initialization from an equilibrium state is required.

The multidensity integral equation approach in the theory of complex liquids

International Nuclear Information System (INIS)

Holovko, M.F.

2001-01-01

Recent development of the multi-density integral equation approach and its application to the statistical mechanical modelling of a different type of association and clusterization in liquids and solutions are reviewed. The effects of dimerization, polymerization and network formation are discussed. The numerical and analytical solutions of the integral equations in the multi-density formalism for pair correlation functions are used for the description of structural and thermodynamical properties of ionic solutions, polymers and network forming fluids

A Large-Scale Design Integration Approach Developed in Conjunction with the Ares Launch Vehicle Program

Science.gov (United States)

Redmon, John W.; Shirley, Michael C.; Kinard, Paul S.

2012-01-01

This paper presents a method for performing large-scale design integration, taking a classical 2D drawing envelope and interface approach and applying it to modern three dimensional computer aided design (3D CAD) systems. Today, the paradigm often used when performing design integration with 3D models involves a digital mockup of an overall vehicle, in the form of a massive, fully detailed, CAD assembly; therefore, adding unnecessary burden and overhead to design and product data management processes. While fully detailed data may yield a broad depth of design detail, pertinent integration features are often obscured under the excessive amounts of information, making them difficult to discern. In contrast, the envelope and interface method results in a reduction in both the amount and complexity of information necessary for design integration while yielding significant savings in time and effort when applied to today's complex design integration projects. This approach, combining classical and modern methods, proved advantageous during the complex design integration activities of the Ares I vehicle. Downstream processes, benefiting from this approach by reducing development and design cycle time, include: Creation of analysis models for the Aerodynamic discipline; Vehicle to ground interface development; Documentation development for the vehicle assembly.

A retrospective likelihood approach for efficient integration of multiple omics factors in case-control association studies.

Science.gov (United States)

Balliu, Brunilda; Tsonaka, Roula; Boehringer, Stefan; Houwing-Duistermaat, Jeanine

2015-03-01

Integrative omics, the joint analysis of outcome and multiple types of omics data, such as genomics, epigenomics, and transcriptomics data, constitute a promising approach for powerful and biologically relevant association studies. These studies often employ a case-control design, and often include nonomics covariates, such as age and gender, that may modify the underlying omics risk factors. An open question is how to best integrate multiple omics and nonomics information to maximize statistical power in case-control studies that ascertain individuals based on the phenotype. Recent work on integrative omics have used prospective approaches, modeling case-control status conditional on omics, and nonomics risk factors. Compared to univariate approaches, jointly analyzing multiple risk factors with a prospective approach increases power in nonascertained cohorts. However, these prospective approaches often lose power in case-control studies. In this article, we propose a novel statistical method for integrating multiple omics and nonomics factors in case-control association studies. Our method is based on a retrospective likelihood function that models the joint distribution of omics and nonomics factors conditional on case-control status. The new method provides accurate control of Type I error rate and has increased efficiency over prospective approaches in both simulated and real data. © 2015 Wiley Periodicals, Inc.

An ontology-based approach for modelling architectural styles

OpenAIRE

Pahl, Claus; Giesecke, Simon; Hasselbring, Wilhelm

2007-01-01

peer-reviewed The conceptual modelling of software architectures is of central importance for the quality of a software system. A rich modelling language is required to integrate the different aspects of architecture modelling, such as architectural styles, structural and behavioural modelling, into a coherent framework.We propose an ontological approach for architectural style modelling based on description logic as an abstract, meta-level modelling instrument. Architect...

Integrated Model of Bioenergy and Agriculture System

DEFF Research Database (Denmark)

Sigurjonsson, Hafthor Ægir; Elmegaard, Brian; Clausen, Lasse Røngaard

2015-01-01

Due to increased burden on the environment caused by human activities, focus on industrial ecology designs are gaining more attention. In that perspective an environ- mentally effective integration of bionergy and agriculture systems has significant potential. This work introduces a modeling...... of the overall model. C- TOOL and Yasso07 are used in the carbon balance of agri- culture, Dynamic Network Analysis is used for the energy simulation and Brightway2 is used to build a Life Cycle Inventory compatible database and processes it for vari- ous impacts assessment methods. The model is success- fully...... approach that builds on Life Cycle Inventory and carries out Life Cycle Impact Assessment for a con- sequential Life Cycle Assessment on integrated bioenergy and agriculture systems. The model framework is built in Python which connects various freely available soft- ware that handle different aspects...

The Integrated Approach to the Accident Evaluation for Advanced LWRs

International Nuclear Information System (INIS)

Oriolo, F.; Paci, S.

1998-01-01

The present paper discusses some relevant phenomena occurring in advanced LWRs during postulated accident scenarios. In particular, the operation of ESF is the starting point for analysis of those phenomena that cause the mutual influence between PS and containment in these plants. As a consequence, it is highlighted as accident analyses which treat PS and containment phenomena completely separated may be not adequate when applied to innovate reactors. Exemplified thermal-hydraulic analysis are presented for AP600 and SBWR, using the FUMO integrated model, for highlight accident evolution taking into account these interactions. The architecture of this integrated code is presented highlighting the importance of an integrated approach to the safety analysis in innovative reactors. (author)

What is the Integral in Integral Education? From Progressive Pedagogy to Integral Pedagogy

Directory of Open Access Journals (Sweden)

Tom Murray

2009-06-01

Full Text Available Integrally-informed educational approaches have much in common withprogressive (including reform, alternative, holistic, and transformative approaches, andshare many of the same values. One function of the integral approach is to provide anoverarching model within which to coordinate different progressive methods. Thoughintegral adds much more than that, descriptions of integral education sometimes soundlike progressive educational principles recast with new terminology. This essay attemptsto clarify what the integral approach adds over and above progressive educationaltheories. After an overview of progressive pedagogical principles, the integral approachis discussed in terms of integral as a model, a method, a community, and a developmentalstage. Integral as a type of consciousness or developmental level is elaborated upon asconsisting of construct-awareness, ego-awareness, relational-awareness, and systemawareness,all important to the educational process. Finally, challenges and supportsystems for realizing integral education are discussed.

An integrated modeling approach to support management decisions of coupled groundwater-agricultural systems under multiple uncertainties

Science.gov (United States)

Hagos Subagadis, Yohannes; Schütze, Niels; Grundmann, Jens

2015-04-01

The planning and implementation of effective water resources management strategies need an assessment of multiple (physical, environmental, and socio-economic) issues, and often requires new research in which knowledge of diverse disciplines are combined in a unified methodological and operational frameworks. Such integrative research to link different knowledge domains faces several practical challenges. Such complexities are further compounded by multiple actors frequently with conflicting interests and multiple uncertainties about the consequences of potential management decisions. A fuzzy-stochastic multiple criteria decision analysis tool was developed in this study to systematically quantify both probabilistic and fuzzy uncertainties associated with complex hydrosystems management. It integrated physical process-based models, fuzzy logic, expert involvement and stochastic simulation within a general framework. Subsequently, the proposed new approach is applied to a water-scarce coastal arid region water management problem in northern Oman, where saltwater intrusion into a coastal aquifer due to excessive groundwater extraction for irrigated agriculture has affected the aquifer sustainability, endangering associated socio-economic conditions as well as traditional social structure. Results from the developed method have provided key decision alternatives which can serve as a platform for negotiation and further exploration. In addition, this approach has enabled to systematically quantify both probabilistic and fuzzy uncertainties associated with the decision problem. Sensitivity analysis applied within the developed tool has shown that the decision makers' risk aversion and risk taking attitude may yield in different ranking of decision alternatives. The developed approach can be applied to address the complexities and uncertainties inherent in water resources systems to support management decisions, while serving as a platform for stakeholder participation.

What Happens to Integrated Product Development Models with Product/Service-System Approaches?

DEFF Research Database (Denmark)

Tan, Adrian; McAloone, Timothy Charles; Andreasen, Mogens Myrup

2006-01-01

Integrated Product Development (IPD) has traditionally focused on the development activities relating to physical technological artefacts. With the advent of business approaches for manufacturing firms based on providing customers the utility of integrated products and services – a term dubbed...... ‘product/service-systems (PSS)’ – companies need to extend their activities to include new dimensions of development. Within the paradigm of mass production and consumption, traditional product-oriented business strategies regarded physical technological artefacts (products) as the mediators of customer...... value. Value was based on the exchange of products between a providing company and a receiving customer. The more products the company could sell, the more revenue it generated. At the point of sale the ownership and responsibility of the product was transferred from company to customer. A customer...

Integrated approach for fusion multi-physics coupled analyses based on hybrid CAD and mesh geometries

Energy Technology Data Exchange (ETDEWEB)

Qiu, Yuefeng, E-mail: yuefeng.qiu@kit.edu; Lu, Lei; Fischer, Ulrich

2015-10-15

Highlights: • Integrated approach for neutronics, thermal and structural analyses was developed. • MCNP5/6, TRIPOLI-4 were coupled with CFX, Fluent and ANSYS Workbench. • A novel meshing approach has been proposed for describing MC geometry. - Abstract: Coupled multi-physics analyses on fusion reactor devices require high-fidelity neutronic models, and flexible, accurate data exchanging between various calculation codes. An integrated coupling approach has been developed to enable the conversion of CAD, mesh, or hybrid geometries for Monte Carlo (MC) codes MCNP5/6, TRIPOLI-4, and translation of nuclear heating data for CFD codes Fluent, CFX and structural mechanical software ANSYS Workbench. The coupling approach has been implemented based on SALOME platform with CAD modeling, mesh generation and data visualization capabilities. A novel meshing approach has been developed for generating suitable meshes for MC geometry descriptions. The coupling approach has been concluded to be reliable and efficient after verification calculations of several application cases.

A comparison of Capri and SEAMLESS-IFas Integrated Modelling Systems, Chapter 11 in Environmental and Agricultural Modelling: Integrated Approaches for Policy Impact Assessement

NARCIS (Netherlands)

Britz, W.; Perez Dominguez, I.; Heckelei, T.

2010-01-01

SEAMLESS-IF and CAPRI are both integrated agricultural modelling systems for policy impact assessment at EU level, linking model components across scales and between the economic and bio-physical domains. However, the overall design, focus and representation of agricultural sub-systems vary between

Integrative biology approach identifies cytokine targeting strategies for psoriasis.

Science.gov (United States)

Perera, Gayathri K; Ainali, Chrysanthi; Semenova, Ekaterina; Hundhausen, Christian; Barinaga, Guillermo; Kassen, Deepika; Williams, Andrew E; Mirza, Muddassar M; Balazs, Mercedesz; Wang, Xiaoting; Rodriguez, Robert Sanchez; Alendar, Andrej; Barker, Jonathan; Tsoka, Sophia; Ouyang, Wenjun; Nestle, Frank O

2014-02-12

Cytokines are critical checkpoints of inflammation. The treatment of human autoimmune disease has been revolutionized by targeting inflammatory cytokines as key drivers of disease pathogenesis. Despite this, there exist numerous pitfalls when translating preclinical data into the clinic. We developed an integrative biology approach combining human disease transcriptome data sets with clinically relevant in vivo models in an attempt to bridge this translational gap. We chose interleukin-22 (IL-22) as a model cytokine because of its potentially important proinflammatory role in epithelial tissues. Injection of IL-22 into normal human skin grafts produced marked inflammatory skin changes resembling human psoriasis. Injection of anti-IL-22 monoclonal antibody in a human xenotransplant model of psoriasis, developed specifically to test potential therapeutic candidates, efficiently blocked skin inflammation. Bioinformatic analysis integrating both the IL-22 and anti-IL-22 cytokine transcriptomes and mapping them onto a psoriasis disease gene coexpression network identified key cytokine-dependent hub genes. Using knockout mice and small-molecule blockade, we show that one of these hub genes, the so far unexplored serine/threonine kinase PIM1, is a critical checkpoint for human skin inflammation and potential future therapeutic target in psoriasis. Using in silico integration of human data sets and biological models, we were able to identify a new target in the treatment of psoriasis.

Synthesizing models useful for ecohydrology and ecohydraulic approaches: An emphasis on integrating models to address complex research questions

Science.gov (United States)

Brewer, Shannon K.; Worthington, Thomas; Mollenhauer, Robert; Stewart, David; McManamay, Ryan; Guertault, Lucie; Moore, Desiree

2018-01-01

Ecohydrology combines empiricism, data analytics, and the integration of models to characterize linkages between ecological and hydrological processes. A challenge for practitioners is determining which models best generalizes heterogeneity in hydrological behaviour, including water fluxes across spatial and temporal scales, integrating environmental and socio‐economic activities to determine best watershed management practices and data requirements. We conducted a literature review and synthesis of hydrologic, hydraulic, water quality, and ecological models designed for solving interdisciplinary questions. We reviewed 1,275 papers and identified 178 models that have the capacity to answer an array of research questions about ecohydrology or ecohydraulics. Of these models, 43 were commonly applied due to their versatility, accessibility, user‐friendliness, and excellent user‐support. Forty‐one of 43 reviewed models were linked to at least 1 other model especially: Water Quality Analysis Simulation Program (linked to 21 other models), Soil and Water Assessment Tool (19), and Hydrologic Engineering Center's River Analysis System (15). However, model integration was still relatively infrequent. There was substantial variation in model applications, possibly an artefact of the regional focus of research questions, simplicity of use, quality of user‐support efforts, or a limited understanding of model applicability. Simply increasing the interoperability of model platforms, transformation of models to user‐friendly forms, increasing user‐support, defining the reliability and risk associated with model results, and increasing awareness of model applicability may promote increased use of models across subdisciplines. Nonetheless, the current availability of models allows an array of interdisciplinary questions to be addressed, and model choice relates to several factors including research objective, model complexity, ability to link to other models, and

Technical Note: Reducing the spin-up time of integrated surface water–groundwater models

KAUST Repository

Ajami, H.

2014-06-26

One of the main challenges in catchment scale application of coupled/integrated hydrologic models is specifying a catchment\\'s initial conditions in terms of soil moisture and depth to water table (DTWT) distributions. One approach to reduce uncertainty in model initialization is to run the model recursively using a single or multiple years of forcing data until the system equilibrates with respect to state and diagnostic variables. However, such "spin-up" approaches often require many years of simulations, making them computationally intensive. In this study, a new hybrid approach was developed to reduce the computational burden of spin-up time for an integrated groundwater-surface water-land surface model (ParFlow.CLM) by using a combination of ParFlow.CLM simulations and an empirical DTWT function. The methodology is examined in two catchments located in the temperate and semi-arid regions of Denmark and Australia respectively. Our results illustrate that the hybrid approach reduced the spin-up time required by ParFlow.CLM by up to 50%, and we outline a methodology that is applicable to other coupled/integrated modelling frameworks when initialization from equilibrium state is required.

High resolution integral holography using Fourier ptychographic approach.

Science.gov (United States)

Li, Zhaohui; Zhang, Jianqi; Wang, Xiaorui; Liu, Delian

2014-12-29

An innovative approach is proposed for calculating high resolution computer generated integral holograms by using the Fourier Ptychographic (FP) algorithm. The approach initializes a high resolution complex hologram with a random guess, and then stitches together low resolution multi-view images, synthesized from the elemental images captured by integral imaging (II), to recover the high resolution hologram through an iterative retrieval with FP constrains. This paper begins with an analysis of the principle of hologram synthesis from multi-projections, followed by an accurate determination of the constrains required in the Fourier ptychographic integral-holography (FPIH). Next, the procedure of the approach is described in detail. Finally, optical reconstructions are performed and the results are demonstrated. Theoretical analysis and experiments show that our proposed approach can reconstruct 3D scenes with high resolution.

Integrated modelling of nitrate loads to coastal waters and land rent applied to catchment scale water management

DEFF Research Database (Denmark)

Jacosen, T.; Refsgaard, A.; Jacobsen, Brian H.

Abstract The EU WFD requires an integrated approach to river basin management in order to meet environmental and ecological objectives. This paper presents concepts and full-scale application of an integrated modelling framework. The Ringkoebing Fjord basin is characterized by intensive agricultu...... in comprehensive, integrated modelling tools.......Abstract The EU WFD requires an integrated approach to river basin management in order to meet environmental and ecological objectives. This paper presents concepts and full-scale application of an integrated modelling framework. The Ringkoebing Fjord basin is characterized by intensive...... agricultural production and leakage of nitrate constitute a major pollution problem with respect groundwater aquifers (drinking water), fresh surface water systems (water quality of lakes) and coastal receiving waters (eutrophication). The case study presented illustrates an advanced modelling approach applied...

An integral approach to corporate environmentalism and its application to a country in transition

Directory of Open Access Journals (Sweden)

Domen Bajde

2012-06-01

Full Text Available In this paper we propose and implement an integral approach to corporate environmentalism. Our integral model accounts not only for corporate environmentalism motivation and conception but also for corporate environmentalism mode and speed of implementation. A broad range of identified corporate environmentalism dimensions helps characterize fi ve basic groups of companies we propose to name “non-compliers,” “legalistic incrementalists,” “greenwashers,” “incremental innovators,” and “radical innovators.” We then seek to empirically verify the soundness of the proposed integral typology by surveying a large sample of Slovenian manufacturing companies. Maximum likelihood probit estimation, exploratory factor analysis, cluster analysis andbinary logistic modeling are used in the empirical analysis. Our main conclusions are twofold: (1 The integral approach to corporate environmentalism works: in the framework of a small open transitional economy, the model differentiates wellamong different groups of companies. (2 There are no radical innovators among Slovenian companies, and less than one third of the companies are actively thinking and acting in line of environment-friendly processes and products. This fi nding can be partially explained by the fact that Slovenian economy still has some transitional characteristics.

INTEGRATED IMAGING APPROACHES SUPPORTING THE EXCAVATION ACTIVITIES. MULTI-SCALE GEOSPATIAL DOCUMENTATION IN HIERAPOLIS (TK

Directory of Open Access Journals (Sweden)

A. Spanò

2018-05-01

Full Text Available The paper focuses on the exploration of the suitability and the discretization of applicability issues about advanced surveying integrated techniques, mainly based on image-based approaches compared and integrated to range-based ones that have been developed with the use of the cutting-edge solutions tested on field. The investigated techniques integrate both technological devices for 3D data acquisition and thus editing and management systems to handle metric models and multi-dimensional data in a geospatial perspective, in order to innovate and speed up the extraction of information during the archaeological excavation activities. These factors, have been experienced in the outstanding site of the Hierapolis of Phrygia ancient city (Turkey, downstream the 2017 surveying missions, in order to produce high-scale metric deliverables in terms of high-detailed Digital Surface Models (DSM, 3D continuous surface models and high-resolution orthoimages products. In particular, the potentialities in the use of UAV platforms for low altitude acquisitions in aerial photogrammetric approach, together with terrestrial panoramic acquisitions (Trimble V10 imaging rover, have been investigated with a comparison toward consolidated Terrestrial Laser Scanning (TLS measurements. One of the main purposes of the paper is to evaluate the results offered by the technologies used independently and using integrated approaches. A section of the study in fact, is specifically dedicated to experimenting the union of different sensor dense clouds: both dense clouds derived from UAV have been integrated with terrestrial Lidar clouds, to evaluate their fusion. Different test cases have been considered, representing typical situations that can be encountered in archaeological sites.

System-of-Systems Approach for Integrated Energy Systems Modeling and Simulation: Preprint

Energy Technology Data Exchange (ETDEWEB)

Mittal, Saurabh; Ruth, Mark; Pratt, Annabelle; Lunacek, Monte; Krishnamurthy, Dheepak; Jones, Wesley

2015-08-21

Today’s electricity grid is the most complex system ever built—and the future grid is likely to be even more complex because it will incorporate distributed energy resources (DERs) such as wind, solar, and various other sources of generation and energy storage. The complexity is further augmented by the possible evolution to new retail market structures that provide incentives to owners of DERs to support the grid. To understand and test new retail market structures and technologies such as DERs, demand-response equipment, and energy management systems while providing reliable electricity to all customers, an Integrated Energy System Model (IESM) is being developed at NREL. The IESM is composed of a power flow simulator (GridLAB-D), home energy management systems implemented using GAMS/Pyomo, a market layer, and hardware-in-the-loop simulation (testing appliances such as HVAC, dishwasher, etc.). The IESM is a system-of-systems (SoS) simulator wherein the constituent systems are brought together in a virtual testbed. We will describe an SoS approach for developing a distributed simulation environment. We will elaborate on the methodology and the control mechanisms used in the co-simulation illustrated by a case study.

A variational integrators approach to second order modeling and identification of linear mechanical systems

NARCIS (Netherlands)

Bruschetta, M.; Saccon, A.; Picci, G.

2014-01-01

The theory of variational integration provides a systematic procedure to discretize the equations of motion of a mechanical system, preserving key properties of the continuous time flow. The discrete-time model obtained by variational integration theory inherits structural conditions which in

Integrated Modelling of an Unmanned High-Altitude Solar-Powered Aircraft for Control Law Design Analysis

OpenAIRE

Klöckner, Andreas; Leitner, Martin; Schlabe, Daniel; Looye, Gertjan

2013-01-01

Solar-powered high-altitude unmanned platforms are highly optimized and integrated aircraft. In order to account for the complex, multi-physical interactions between their systems, we propose using integrated simulation models throughout the aircraft’s life cycle. Especially small teams with limited ressources should benefit from this approach. In this paper, we describe our approach to an integrated model of the Electric High-Altitude Solar-Powered Aircraft ELHASPA. It includes aspects of th...

Leader communication approaches and patient safety: An integrated model.

Science.gov (United States)

Mattson, Malin; Hellgren, Johnny; Göransson, Sara

2015-06-01

Leader communication is known to influence a number of employee behaviors. When it comes to the relationship between leader communication and safety, the evidence is more scarce and ambiguous. The aim of the present study is to investigate whether and in what way leader communication relates to safety outcomes. The study examines two leader communication approaches: leader safety priority communication and feedback to subordinates. These approaches were assumed to affect safety outcomes via different employee behaviors. Questionnaire data, collected from 221 employees at two hospital wards, were analyzed using structural equation modeling. The two examined communication approaches were both positively related to safety outcomes, although leader safety priority communication was mediated by employee compliance and feedback communication by organizational citizenship behaviors. The findings suggest that leader communication plays a vital role in improving organizational and patient safety and that different communication approaches seem to positively affect different but equally essential employee safety behaviors. The results highlights the necessity for leaders to engage in one-way communication of safety values as well as in more relational feedback communication with their subordinates in order to enhance patient safety. Copyright © 2015 Elsevier Ltd. and National Safety Council. Published by Elsevier Ltd. All rights reserved.

Integrated Transport Planning Framework Involving Combined Utility Regret Approach

DEFF Research Database (Denmark)

Wang, Yang; Monzon, Andres; Di Ciommo, Floridea

2014-01-01

Sustainable transport planning requires an integrated approach involving strategic planning, impact analysis, and multicriteria evaluation. This study aimed at relaxing the utility-based decision-making assumption by newly embedding anticipated-regret and combined utility regret decision mechanisms...... in a framework for integrated transport planning. The framework consisted of a two-round Delphi survey, integrated land use and transport model for Madrid, and multicriteria analysis. Results show that (a) the regret-based ranking has a similar mean but larger variance than the utility-based ranking does, (b......) the least-regret scenario forms a compromise between the desired and the expected scenarios, (c) the least-regret scenario can lead to higher user benefits in the short term and lower user benefits in the long term, (d) the utility-based, the regret-based, and the combined utility- and regret...

Development of Multisensory Integration Approach Model

Science.gov (United States)

Kumar, S. Prasanna; Nathan, B. Sami

2016-01-01

Every teacher expects optimum level of processing in mind of them students. The level of processing is mainly depends upon memory process. Most of the students have retrieval difficulties on past learning. Memory difficulties directly related to sensory integration. In these circumstances the investigator made an attempt to construct Multisensory…

Designing water demand management schemes using a socio-technical modelling approach.

Science.gov (United States)

Baki, Sotiria; Rozos, Evangelos; Makropoulos, Christos

2018-05-01

Although it is now widely acknowledged that urban water systems (UWSs) are complex socio-technical systems and that a shift towards a socio-technical approach is critical in achieving sustainable urban water management, still, more often than not, UWSs are designed using a segmented modelling approach. As such, either the analysis focuses on the description of the purely technical sub-system, without explicitly taking into account the system's dynamic socio-economic processes, or a more interdisciplinary approach is followed, but delivered through relatively coarse models, which often fail to provide a thorough representation of the urban water cycle and hence cannot deliver accurate estimations of the hydrosystem's responses. In this work we propose an integrated modelling approach for the study of the complete socio-technical UWS that also takes into account socio-economic and climatic variability. We have developed an integrated model, which is used to investigate the diffusion of household water conservation technologies and its effects on the UWS, under different socio-economic and climatic scenarios. The integrated model is formed by coupling a System Dynamics model that simulates the water technology adoption process, and the Urban Water Optioneering Tool (UWOT) for the detailed simulation of the urban water cycle. The model and approach are tested and demonstrated in an urban redevelopment area in Athens, Greece under different socio-economic scenarios and policy interventions. It is suggested that the proposed approach can establish quantifiable links between socio-economic change and UWS responses and therefore assist decision makers in designing more effective and resilient long-term strategies for water conservation. Copyright © 2017 Elsevier B.V. All rights reserved.

Integrated community-based dementia care: the Geriant model

Directory of Open Access Journals (Sweden)

Ludo Glimmerveen

2015-09-01

Full Text Available This article gives an in-depth description of the service delivery model of Geriant, a Dutch organization providing community-based care services for people suffering from dementia. Core to its model is the provision of clinical case management, embedded in multidisciplinary dementia care teams. As Geriant's client group includes people from the first presumption of dementia until they can no longer live at home, its care model provides valuable lessons about how different mechanisms of integration are flexibly put to use if the complexity of clients” care needs increases. It showcases how the integration of services for a specific sub-population is combined with alignment of these services with generalist network partners. After a detailed description of the programme and its results, this article builds on the work of Walter Leutz for a conceptual discussion of Geriant's approach to care integration. 

Integrative change model in psychotherapy: Perspectives from Indian thought.

Science.gov (United States)

Manickam, L S S

2013-01-01

Different psychotherapeutic approaches claim positive changes in patients as a result of therapy. Explanations related to the change process led to different change models. Some of the change models are experimentally oriented whereas some are theoretical. Apart from the core models of behavioral, psychodynamic, humanistic, cognitive and spiritually oriented models there are specific models, within psychotherapy that explains the change process. Integrative theory of a person as depicted in Indian thought provides a common ground for the integration of various therapies. Integrative model of change based on Indian thought, with specific reference to psychological concepts in Upanishads, Ayurveda, Bhagavad Gita and Yoga are presented. Appropriate psychological tools may be developed in order to help the clinicians to choose the techniques that match the problem and the origin of the dimension. Explorations have to be conducted to develop more techniques that are culturally appropriate and clinically useful. Research has to be initiated to validate the identified concepts.

A critical review of integrated urban water modelling – Urban drainage and beyond

DEFF Research Database (Denmark)

Bach, Peter M.; Rauch, Wolfgang; Mikkelsen, Peter Steen

2014-01-01

considerations (e.g. data issues, model structure, computational and integration-related aspects), common methodology for model development (through a systems approach), calibration/optimisation and uncertainty are discussed, placing importance on pragmatism and parsimony. Integrated urban water models should......Modelling interactions in urban drainage, water supply and broader integrated urban water systems has been conceptually and logistically challenging as evidenced in a diverse body of literature, found to be confusing and intimidating to new researchers. This review consolidates thirty years...... of research (initially driven by interest in urban drainage modelling) and critically reflects upon integrated modelling in the scope of urban water systems. We propose a typology to classify integrated urban water system models at one of four ‘degrees of integration’ (followed by its exemplification). Key...

Mass generation in perturbed massless integrable models

International Nuclear Information System (INIS)

Controzzi, D.; Mussardo, G.

2005-01-01

We extend form-factor perturbation theory to non-integrable deformations of massless integrable models, in order to address the problem of mass generation in such systems. With respect to the standard renormalisation group analysis this approach is more suitable for studying the particle content of the perturbed theory. Analogously to the massive case, interesting information can be obtained already at first order, such as the identification of the operators which create a mass gap and those which induce the confinement of the massless particles in the perturbed theory

Rethinking School Bullying: Towards an Integrated Model

Science.gov (United States)

Dixon, Roz; Smith, Peter K.

2011-01-01

What would make anti-bullying initiatives more successful? This book offers a new approach to the problem of school bullying. The question of what constitutes a useful theory of bullying is considered and suggestions are made as to how priorities for future research might be identified. The integrated, systemic model of school bullying introduced…

Integrated Intelligent Modeling, Design and Control of Crystal Growth Processes

National Research Council Canada - National Science Library

Prasad, V

2000-01-01

.... This MURI program took an integrated approach towards modeling, design and control of crystal growth processes and in conjunction with growth and characterization experiments developed much better...

Advanced multiresponse process optimisation an intelligent and integrated approach

CERN Document Server

Šibalija, Tatjana V

2016-01-01

This book presents an intelligent, integrated, problem-independent method for multiresponse process optimization. In contrast to traditional approaches, the idea of this method is to provide a unique model for the optimization of various processes, without imposition of assumptions relating to the type of process, the type and number of process parameters and responses, or interdependences among them. The presented method for experimental design of processes with multiple correlated responses is composed of three modules: an expert system that selects the experimental plan based on the orthogonal arrays; the factor effects approach, which performs processing of experimental data based on Taguchi’s quality loss function and multivariate statistical methods; and process modeling and optimization based on artificial neural networks and metaheuristic optimization algorithms. The implementation is demonstrated using four case studies relating to high-tech industries and advanced, non-conventional processes.

Testing for Level Shifts in Fractionally Integrated Processes: a State Space Approach

DEFF Research Database (Denmark)

Monache, Davide Delle; Grassi, Stefano; Santucci de Magistris, Paolo

Short memory models contaminated by level shifts have similar long-memory features as fractionally integrated processes. This makes hard to verify whether the true data generating process is a pure fractionally integrated process when employing standard estimation methods based on the autocorrela......Short memory models contaminated by level shifts have similar long-memory features as fractionally integrated processes. This makes hard to verify whether the true data generating process is a pure fractionally integrated process when employing standard estimation methods based...... on the autocorrelation function or the periodogram. In this paper, we propose a robust testing procedure, based on an encompassing parametric specification that allows to disentangle the level shifts from the fractionally integrated component. The estimation is carried out on the basis of a state-space methodology...... and it leads to a robust estimate of the fractional integration parameter also in presence of level shifts. Once the memory parameter is correctly estimated, we use the KPSS test for presence of level shift. The Monte Carlo simulations show how this approach produces unbiased estimates of the memory parameter...

Integrating radiology vertically into an undergraduate medical education curriculum: a triphasic integration approach

Directory of Open Access Journals (Sweden)

Al Qahtani F

2014-06-01

Full Text Available Fahd Al Qahtani,1 Adel Abdelaziz2,31Radiology Department, Faculty of Medicine, Al-Baha University, Al-Baha, Saudi Arabia; 2Medical Education Development Unit, Faculty of Medicine, Al-Baha University, Al-Baha, Saudi Arabia; 3Medical Education Department, Faculty of Medicine, Suez Canal University, Ismailia, EgyptAbstract: Fulfilling the goal of integrating radiology into undergraduate medical curricula is a real challenge due to the enduring faith assuming that traditional medical disciplines are worthy of consuming the available study time. In this manner, radiology is addressed occasionally and with relevance to these traditional disciplines. In Al-Baha University Faculty of Medicine, Al-Baha, Saudi Arabia, efforts have been made to integrate radiology vertically and in a structured manner into the undergraduate curriculum from the first year to the sixth year. For achieving convenient integration of radiology, a triphasic approach to integration is adopted. This approach consists of the integration of radiology foundations into the basic sciences phase, development of a distinct 4-week module in year 4, and finally, integration of clinical applications of radiology in the clinical phase modules. Feedback of students and inferences obtained through assessment and program evaluation are in favor of this approach to integration. Minor reform and some improvement related to time allocated and content balancing are still indicated.Keywords: radiology foundations, radiology module, students assessment

Integrals of random fields treated by the model correction factor method

DEFF Research Database (Denmark)

Franchin, P.; Ditlevsen, Ove Dalager; Kiureghian, Armen Der

2002-01-01

The model correction factor method (MCFM) is used in conjunction with the first-order reliability method (FORM) to solve structural reliability problems involving integrals of non-Gaussian random fields. The approach replaces the limit-state function with an idealized one, in which the integrals ...

Integrability in three dimensions: Algebraic Bethe ansatz for anyonic models

Directory of Open Access Journals (Sweden)

Sh. Khachatryan

2015-10-01

Full Text Available We extend basic properties of two dimensional integrable models within the Algebraic Bethe Ansatz approach to 2+1 dimensions and formulate the sufficient conditions for the commutativity of transfer matrices of different spectral parameters, in analogy with Yang–Baxter or tetrahedron equations. The basic ingredient of our models is the R-matrix, which describes the scattering of a pair of particles over another pair of particles, the quark-anti-quark (meson scattering on another quark-anti-quark state. We show that the Kitaev model belongs to this class of models and its R-matrix fulfills well-defined equations for integrability.

Dynamic integration of residential building design and green energies : the Bireth approach : building integrated renewable energy total harvest approach

Energy Technology Data Exchange (ETDEWEB)

Cheung, K.P. [Hong Kong Univ., Hong Kong (China). Dept. of Architecture; Luk, C.L.P. [Chu Hai College of Higher Education, Hong Kong (China). Dept. of Architecture; Wong, S.T. [Hong Kong Univ., Hong Kong (China). Div. of Arts and Humanities, SPACE; Chung, S.L.; Fung, K.S.; Leung, M.F. [Hong Kong Inst. of Vocational Education, Hong Kong (China)

2006-07-01

Renewable energy sources that are commonly used in buildings include solar energy, wind energy and rainwater collection. High quality environmentally responsive residential buildings are designed to provide good insulation in winter and solar shading in summer. However, this study demonstrated that the green energy design in residential buildings is not usually well integrated. For example, windows with clear double or triple glazed glass, allow good penetration of sunlight during the day in winter, but are not further dynamically insulated for when the sun goes down to avoid heat loss from the building. Additionally, good solar static shading devices often block much needed daylight on cloudy winter days. These examples emphasize the lack of an integrated approach to gain the best advantage of green energies and to minimize energy costs in residential buildings. This study addressed issues facing the integrated approach with particular reference to the design of a small residential building in rural Beijing. The design included a new approach for interpreting a traditional Beijing court yard house in the modern Beijing rural context, while integrating multi-responding innovative green energy applications derived from first principles. This paper also presented a proposal for a village house in Hong Kong to harvest as much renewable energies as possible, primarily wind energy and solar energy, that come into contact with the building. The purpose was to work towards a renewable energy approach for buildings, namely the Bireth approach, which will benefit practically all houses by making them zero energy houses. The paper described the feasibility of integrating renewable energies in buildings to fulfill performance requirements such improving ventilation, providing warm interiors, drying clothes, or storing solar and wind energies into power batteries. The challenges facing the development of a proposed micro solar hot air turbine were also presented. 15 refs., 6

An Adaptive Intelligent Integrated Lighting Control Approach for High-Performance Office Buildings

Science.gov (United States)

Karizi, Nasim

An acute and crucial societal problem is the energy consumed in existing commercial buildings. There are 1.5 million commercial buildings in the U.S. with only about 3% being built each year. Hence, existing buildings need to be properly operated and maintained for several decades. Application of integrated centralized control systems in buildings could lead to more than 50% energy savings. This research work demonstrates an innovative adaptive integrated lighting control approach which could achieve significant energy savings and increase indoor comfort in high performance office buildings. In the first phase of the study, a predictive algorithm was developed and validated through experiments in an actual test room. The objective was to regulate daylight on a specified work plane by controlling the blind slat angles. Furthermore, a sensor-based integrated adaptive lighting controller was designed in Simulink which included an innovative sensor optimization approach based on genetic algorithm to minimize the number of sensors and efficiently place them in the office. The controller was designed based on simple integral controllers. The objective of developed control algorithm was to improve the illuminance situation in the office through controlling the daylight and electrical lighting. To evaluate the performance of the system, the controller was applied on experimental office model in Lee et al.'s research study in 1998. The result of the developed control approach indicate a significantly improvement in lighting situation and 1-23% and 50-78% monthly electrical energy savings in the office model, compared to two static strategies when the blinds were left open and closed during the whole year respectively.

Selecting among five common modelling approaches for integrated environmental assessment and management

NARCIS (Netherlands)

Kelly, Rebecca A.; Jakeman, Anthony J.; Barreteau, Olivier; Borsuk, Mark E.; El-Sawah, Sondoss; Hamilton, Serena H.; Henriksen, Hans Jorgen; Kuikka, Sakari; Maier, Holger R.; Rizzoli, Andrea Emilio; van Delden, H.; Voinov, A.

2013-01-01

The design and implementation of effective environmental policies need to be informed by a holistic understanding of the system processes (biophysical, social and economic), their complex interactions, and how they respond to various changes. Models, integrating different system processes into a

The meaning of integrated care: a systems approach

Directory of Open Access Journals (Sweden)

Lars Edgren

2008-10-01

Full Text Available Introduction: Organizations can be regarded as systems. The traditional model of systems views them as machines. This seems to be insufficient when it comes to understanding and organizing complex tasks. To better understand integrated care we should approach organizations as constantly changing living organisms, where many agents are interconnected in so-called Complex Adaptive Systems (CAS. Theory and discussion: The term “complex” emphasizes that the necessary competence to perform a task is not owned by any one part, but comes as a result of co-operation within the system. “Adaptive” means that system change occurs through successive adaptations. A CAS consists of several subsystems called agents, which act in dependence of one another. Examples would be the ant-hill, the human immune defence, the financial market and the surgical operating theatre team. Studying a CAS, the focus is on the interaction and communication between agents. Although these thoughts are not new, the CAS-approach has not yet been widely applied to the management of integrated care. This helps the management to understand why the traditional top down way of managing, following the machine model thinking, may meet with problems in interdependent organizations with complex tasks. Conclusion: When we perceive health and social services as CASs we should gain more insight into the processes that go on within and between organizations and how top management, for example within a hospital, in fact executes its steering function.

An integrative formal model of motivation and decision making: The MGPM*.

Science.gov (United States)

Ballard, Timothy; Yeo, Gillian; Loft, Shayne; Vancouver, Jeffrey B; Neal, Andrew

2016-09-01

We develop and test an integrative formal model of motivation and decision making. The model, referred to as the extended multiple-goal pursuit model (MGPM*), is an integration of the multiple-goal pursuit model (Vancouver, Weinhardt, & Schmidt, 2010) and decision field theory (Busemeyer & Townsend, 1993). Simulations of the model generated predictions regarding the effects of goal type (approach vs. avoidance), risk, and time sensitivity on prioritization. We tested these predictions in an experiment in which participants pursued different combinations of approach and avoidance goals under different levels of risk. The empirical results were consistent with the predictions of the MGPM*. Specifically, participants pursuing 1 approach and 1 avoidance goal shifted priority from the approach to the avoidance goal over time. Among participants pursuing 2 approach goals, those with low time sensitivity prioritized the goal with the larger discrepancy, whereas those with high time sensitivity prioritized the goal with the smaller discrepancy. Participants pursuing 2 avoidance goals generally prioritized the goal with the smaller discrepancy. Finally, all of these effects became weaker as the level of risk increased. We used quantitative model comparison to show that the MGPM* explained the data better than the original multiple-goal pursuit model, and that the major extensions from the original model were justified. The MGPM* represents a step forward in the development of a general theory of decision making during multiple-goal pursuit. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Adopting De Novo Programming Approach on IC Design Service Firms Resources Integration

Directory of Open Access Journals (Sweden)

James K. C. Chen

2014-01-01

Full Text Available The semiconductor industry has very important position in computer industry, ICT field, and new electronic technology developing. The IC design service is one of key factor of semiconductor industry development. There are more than 365 IC design service firms have been established around Hsinchu Science Park in Taiwan. Building an efficient planning model for IC design service firm resources integrating is very interest issue. This study aims to construct a planning model for IC design service firm implementation resources integration. This study uses the De Novo programming as an approach of criteria alternative to achieve optimal resource allocation on IC design firm. Results show the IC design service firm should conduct open innovation concept and utilizes design outsourcing obtains cost down and enhance IC design service business performance. This plan model of De Novo programming is not only for IC design service firm and also can apply to the other industrial implementation strategic alliance/integrating resource. This plan model is a universal model for the others industries field.

Unified Approach to Modeling and Simulation of Space Communication Networks and Systems

Science.gov (United States)

Barritt, Brian; Bhasin, Kul; Eddy, Wesley; Matthews, Seth

2010-01-01

Network simulator software tools are often used to model the behaviors and interactions of applications, protocols, packets, and data links in terrestrial communication networks. Other software tools that model the physics, orbital dynamics, and RF characteristics of space systems have matured to allow for rapid, detailed analysis of space communication links. However, the absence of a unified toolset that integrates the two modeling approaches has encumbered the systems engineers tasked with the design, architecture, and analysis of complex space communication networks and systems. This paper presents the unified approach and describes the motivation, challenges, and our solution - the customization of the network simulator to integrate with astronautical analysis software tools for high-fidelity end-to-end simulation. Keywords space; communication; systems; networking; simulation; modeling; QualNet; STK; integration; space networks

The dynamics of multimodal integration: The averaging diffusion model.

Science.gov (United States)

Turner, Brandon M; Gao, Juan; Koenig, Scott; Palfy, Dylan; L McClelland, James

2017-12-01

We combine extant theories of evidence accumulation and multi-modal integration to develop an integrated framework for modeling multimodal integration as a process that unfolds in real time. Many studies have formulated sensory processing as a dynamic process where noisy samples of evidence are accumulated until a decision is made. However, these studies are often limited to a single sensory modality. Studies of multimodal stimulus integration have focused on how best to combine different sources of information to elicit a judgment. These studies are often limited to a single time point, typically after the integration process has occurred. We address these limitations by combining the two approaches. Experimentally, we present data that allow us to study the time course of evidence accumulation within each of the visual and auditory domains as well as in a bimodal condition. Theoretically, we develop a new Averaging Diffusion Model in which the decision variable is the mean rather than the sum of evidence samples and use it as a base for comparing three alternative models of multimodal integration, allowing us to assess the optimality of this integration. The outcome reveals rich individual differences in multimodal integration: while some subjects' data are consistent with adaptive optimal integration, reweighting sources of evidence as their relative reliability changes during evidence integration, others exhibit patterns inconsistent with optimality.

Integration of dynamical data in a geostatistical model of reservoir; Integration des donnees dynamiques dans un modele geostatistique de reservoir

Energy Technology Data Exchange (ETDEWEB)

Costa Reis, L.

2001-01-01

We have developed in this thesis a methodology of integrated characterization of heterogeneous reservoirs, from geologic modeling to history matching. This methodology is applied to the reservoir PBR, situated in Campos Basin, offshore Brazil, which has been producing since June 1979. This work is an extension of two other thesis concerning geologic and geostatistical modeling of the reservoir PBR from well data and seismic information. We extended the geostatistical litho-type model to the whole reservoir by using a particular approach of the non-stationary truncated Gaussian simulation method. This approach facilitated the application of the gradual deformation method to history matching. The main stages of the methodology for dynamic data integration in a geostatistical reservoir model are presented. We constructed a reservoir model and the initial difficulties in the history matching led us to modify some choices in the geological, geostatistical and flow models. These difficulties show the importance of dynamic data integration in reservoir modeling. The petrophysical property assignment within the litho-types was done by using well test data. We used an inversion procedure to evaluate the petrophysical parameters of the litho-types. The up-scaling is a necessary stage to reduce the flow simulation time. We compared several up-scaling methods and we show that the passage from the fine geostatistical model to the coarse flow model should be done very carefully. The choice of the fitting parameter depends on the objective of the study. In the case of the reservoir PBR, where water is injected in order to improve the oil recovery, the water rate of the producing wells is directly related to the reservoir heterogeneity. Thus, the water rate was chosen as the fitting parameter. We obtained significant improvements in the history matching of the reservoir PBR. First, by using a method we have proposed, called patchwork. This method allows us to built a coherent

How can design approaches be integrated into entrepreneurship education?

DEFF Research Database (Denmark)

Færgemann, Helle Meibom; Nørgård, Rikke Toft; Robinson, Sarah

reflection about the intention and how the elements fit with the entrepreneurship field. The proposed process model presented (Fig 3) primarily has potential to strengthen the awareness of the need to alternate between divergence and convergence many times through an entrepreneurial process. Apart from......Questions we care about: When educating students through entrepreneurship we are interested in how can design approaches and processes be integrated into Entrepreneurship Education and what effect does this have on entrepreneurial learning? Approach: This is a conceptual paper which draws on data...... from a classic entrepreneurship course (mix of for- and through-approach) as well as a classic design course. Furthermore data from the iterative development of an entrepreneurship course with substantial design elements is a key data source. Overall, products and processes in the course have been...

A numerical integration approach suitable for simulating PWR dynamics using a microcomputer system

International Nuclear Information System (INIS)

Zhiwei, L.; Kerlin, T.W.

1983-01-01

It is attractive to use microcomputer systems to simulate nuclear power plant dynamics for the purpose of teaching and/or control system design. An analysis and a comparison of feasibility of existing numerical integration methods have been made. The criteria for choosing the integration step using various numerical integration methods including the matrix exponential method are derived. In order to speed up the simulation, an approach is presented using the Newton recursion calculus which can avoid convergence limitations in choosing the integration step size. The accuracy consideration will dominate the integration step limited. The advantages of this method have been demonstrated through a case study using CBM model 8032 microcomputer to simulate a reduced order linear PWR model under various perturbations. It has been proven theoretically and practically that the Runge-Kutta method and Adams-Moulton method are not feasible. The matrix exponential method is good at accuracy and fairly good at speed. The Newton recursion method can save 3/4 to 4/5 time compared to the matrix exponential method with reasonable accuracy. Vertical Barhis method can be expanded to deal with nonlinear nuclear power plant models and higher order models as well

An API for Integrating Spatial Context Models with Spatial Reasoning Algorithms

DEFF Research Database (Denmark)

Kjærgaard, Mikkel Baun

2006-01-01

The integration of context-aware applications with spatial context models is often done using a common query language. However, algorithms that estimate and reason about spatial context information can benefit from a tighter integration. An object-oriented API makes such integration possible...... and can help reduce the complexity of algorithms making them easier to maintain and develop. This paper propose an object-oriented API for context models of the physical environment and extensions to a location modeling approach called geometric space trees for it to provide adequate support for location...... modeling. The utility of the API is evaluated in several real-world cases from an indoor location system, and spans several types of spatial reasoning algorithms....

Integrated Medical Model Overview

Science.gov (United States)

Myers, J.; Boley, L.; Foy, M.; Goodenow, D.; Griffin, D.; Keenan, A.; Kerstman, E.; Melton, S.; McGuire, K.; Saile, L.;

The integrated approach to teaching programming in secondary school

Directory of Open Access Journals (Sweden)

Martynyuk A.A.

2018-02-01

Full Text Available the article considers an integrated approach to teaching programming with the use of technologies of computer modeling and 3D-graphics, allowing to improve the quality of education. It is shown that this method will allow you to systematize knowledge, improve the level of motivation through the inclusion of relevant technologies, to develop skills of project activities, to strengthen interdisciplinary connections, and promotes professional and personal self-determination of students of secondary school.

Integrated modelling of the morphological evolution of the sand engine mega-nourishment.

NARCIS (Netherlands)

Luijendijk, Arjen; Velhorst, Rufus; Hoonhout, B.; de Vries, S.; Ranasinghe, Ranasinghe W M R J B; Aagaard, Troels; Deigaard, Rolf; Fuhrman, David

2017-01-01

This study presents some recent developments in coastal morphological modeling focusing on flexible meshes, flexible coupling between models operating at different time scales, and a recently developed morphodynamic model for the intertidal and dry beach. This integrated modeling approach is applied

Integrated modelling of the morphological evolution of the sand engine mega-nourishment

NARCIS (Netherlands)

Luijendijk, A.P.; Hoonhout, B.M.; de Vries, S.; Ranasinghe, D.; Aagaard, T.; Deigaard, R.; Fuhrman, D.

2017-01-01

This study presents some recent developments in coastal morphological modeling focusing on flexible meshes, flexible coupling between models operating at different time scales, and a recently developed morphodynamic model for the intertidal and dry beach. This integrated modeling approach is applied

Integral approach to innovative fuel and material investigations in the Halden reactor

International Nuclear Information System (INIS)

Volkov, B.

2009-01-01

Integral approach used for fuel and material investigations in the Halden reactor can be used in support of qualification and certification of fuel to be introduced in commercial NPPs. This approach has been partly used for WWER fuel investigation in the Halden Reactor in a series of irradiation tests. In-pile fuel performance tests with reliable measurements provided by Halden instrumentation under different conditions can be used for validation of the WWER fuel behaviour models and verification of fuel performance codes. These models and codes can be used for qualification of innovative fuel behaviour under extended conditions

Critical perspectives of pedagogical approaches to reversing the order of integration in double integrals

Science.gov (United States)

Tisdell, Christopher C.

2017-11-01

This paper presents some critical perspectives regarding pedagogical approaches to the method of reversing the order of integration in double integrals from prevailing educational literature on multivariable calculus. First, we question the message found in popular textbooks that the traditional process of reversing the order of integration is necessary when solving well-known problems. Second, we illustrate that the method of integration by parts can be directly applied to many of the classic pedagogical problems in the literature concerning double integrals, without taking the well-worn steps associated with reversing the order of integration. Third, we examine the benefits and limitations of such a method. In our conclusion, we advocate for integration by parts to be a part of the pedagogical conversation in the learning and teaching of double integral methods; and call for more debate around its use in the learning and teaching of other areas of mathematics. Finally, we emphasize the need for critical approaches in the pedagogy of mathematics more broadly.

Modification of the Integrated Sasang Constitutional Diagnostic Model

Directory of Open Access Journals (Sweden)

Jiho Nam

2017-01-01

Full Text Available In 2012, the Korea Institute of Oriental Medicine proposed an objective and comprehensive physical diagnostic model to address quantification problems in the existing Sasang constitutional diagnostic method. However, certain issues have been raised regarding a revision of the proposed diagnostic model. In this paper, we propose various methodological approaches to address the problems of the previous diagnostic model. Firstly, more useful variables are selected in each component. Secondly, the least absolute shrinkage and selection operator is used to reduce multicollinearity without the modification of explanatory variables. Thirdly, proportions of SC types and age are considered to construct individual diagnostic models and classify the training set and the test set for reflecting the characteristics of the entire dataset. Finally, an integrated model is constructed with explanatory variables of individual diagnosis models. The proposed integrated diagnostic model significantly improves the sensitivities for both the male SY type (36.4% → 62.0% and the female SE type (43.7% → 64.5%, which were areas of limitation of the previous integrated diagnostic model. The ideas of these new algorithms are expected to contribute not only to the scientific development of Sasang constitutional medicine in Korea but also to that of other diagnostic methods for traditional medicine.

Integrated approach to assess ecosystem health in harbor areas.

Science.gov (United States)

Bebianno, M J; Pereira, C G; Rey, F; Cravo, A; Duarte, D; D'Errico, G; Regoli, F

2015-05-01

Harbors are critical environments with strategic economic importance but with potential environmental impact: health assessment criteria are a key issue. An ecosystem health status approach was carried out in Portimão harbor as a case-study. Priority and specific chemical levels in sediments along with their bioavailability in mussels, bioassays and a wide array of biomarkers were integrated in a biomarker index (IBR index) and the overall data in a weight of evidence (WOE) model. Metals, PAHs, PCBs and HCB were not particularly high compared with sediment guidelines and standards for dredging. Bioavailability was evident for Cd, Cu and Zn. Biomarkers proved more sensitive namely changes of antioxidant responses, metallothioneins and vittellogenin-like proteins. IBR index indicated that site 4 was the most impacted area. Assessment of the health status by WOE approach highlighted the importance of integrating sediment chemistry, bioaccumulation, biomarkers and bioassays and revealed that despite some disturbance in the harbor area, there was also an impact of urban effluents from upstream. Environmental quality assessment in harbors. Copyright © 2015 Elsevier B.V. All rights reserved.

Modelling nutritional mutualisms: challenges and opportunities for data integration.

Science.gov (United States)

Clark, Teresa J; Friel, Colleen A; Grman, Emily; Shachar-Hill, Yair; Friesen, Maren L

2017-09-01

Nutritional mutualisms are ancient, widespread, and profoundly influential in biological communities and ecosystems. Although much is known about these interactions, comprehensive answers to fundamental questions, such as how resource availability and structured interactions influence mutualism persistence, are still lacking. Mathematical modelling of nutritional mutualisms has great potential to facilitate the search for comprehensive answers to these and other fundamental questions by connecting the physiological and genomic underpinnings of mutualisms with ecological and evolutionary processes. In particular, when integrated with empirical data, models enable understanding of underlying mechanisms and generalisation of principles beyond the particulars of a given system. Here, we demonstrate how mathematical models can be integrated with data to address questions of mutualism persistence at four biological scales: cell, individual, population, and community. We highlight select studies where data has been or could be integrated with models to either inform model structure or test model predictions. We also point out opportunities to increase model rigour through tighter integration with data, and describe areas in which data is urgently needed. We focus on plant-microbe systems, for which a wealth of empirical data is available, but the principles and approaches can be generally applied to any nutritional mutualism. © 2017 John Wiley & Sons Ltd/CNRS.

INTEGRATED COST MODEL FOR IMPROVING THE PRODUCTION IN COMPANIES

Directory of Open Access Journals (Sweden)

Zuzana Hajduova

2014-12-01

Full Text Available Purpose: All processes in the company play important role in ensuring functional integrated management system. We point out the importance of need for a systematic approach to the use of quantitative, but especially statistical methods for modelling the cost of the improvement activities that are part of an integrated management system. Development of integrated management systems worldwide leads towards building of systematic procedures of implementation maintenance and improvement of all systems according to the requirements of all the sides involved.Methodology: Statistical evaluation of the economic indicators of improvement costs and the need for a systematic approach to their management in terms of integrated management systems have become a key role also in the management of processes in the company Cu Drôt, a.s. The aim of this publication is to highlight the importance of proper implementation of statistical methods in the process of improvement costs management in the integrated management system of current market conditions and document the legitimacy of a systematic approach in the area of monitoring and analysing indicators of improvement with the aim of the efficient process management of company. We provide specific example of the implementation of appropriate statistical methods in the production of copper wire in a company Cu Drôt, a.s. This publication also aims to create a model for the estimation of integrated improvement costs, which through the use of statistical methods in the company Cu Drôt, a.s. is used to support decision-making on improving efficiency.Findings: In the present publication, a method for modelling the improvement process, by an integrated manner, is proposed. It is a method in which the basic attributes of the improvement in quality, safety and environment are considered and synergistically combined in the same improvement project. The work examines the use of sophisticated quantitative, especially

MODEL OF INTEGRATED VALUE OF PROJECTS IN THE FIELD OF ALTERNATIVE ENERGY

Directory of Open Access Journals (Sweden)

Наталія Ігорівна БОРИСОВА

2015-05-01

Full Text Available Development of alternative energy sources requires the implementation of complex problems, the solution of which is necessary to apply the project approach. The uniqueness of alternative energy projects (AEP necessitates individual approach to evaluating the effectiveness of each. The paper contains the results of the project management features's analysis in the field of alternative energy, determining the values and developing of the value management integrated conceptual model of AEP. In assessing the effectiveness of AEP considered the socio-economic and commercial aspects. Value management integrated conceptual model of AEP was obtained by combining the classical model of the project management goals with the project values model "Five "E" and two "A". The classical model of the project management goals have been complemented with risk parameters.

The UK transport carbon model: An integrated life cycle approach to explore low carbon futures

International Nuclear Information System (INIS)

Brand, Christian; Tran, Martino; Anable, Jillian

2012-01-01

Current debate focuses on the need for the transport sector to contribute to more ambitious carbon emission reduction targets. In the UK, various macro-economic and energy system wide, top-down models are used to explore the potential for energy demand and carbon emissions reduction in the transport sector. These models can lack the bottom-up, sectoral detail needed to simulate the effects of integrated demand and supply-side policy strategies to reduce emissions. Bridging the gap between short-term forecasting and long-term scenario “models”, this paper introduces a newly developed strategic transport, energy, emissions and environmental impacts model, the UK Transport Carbon Model (UKTCM). The UKTCM covers the range of transport–energy–environment issues from socio-economic and policy influences on energy demand reduction through to life cycle carbon emissions and external costs. The model is demonstrated in this paper by presenting the results of three single policies and one policy package scenario. Limitations of the model are also discussed. Developed under the auspices of the UK Energy Research Centre (UKERC) the UKTCM can be used to develop transport policy scenarios that explore the full range of technological, fiscal, regulatory and behavioural change policy interventions to meet UK climate change and energy security goals. - Research highlights: ►New strategic transport, energy, emissions and environmental impacts model. ►Tool to develop and analyse full consequences of multiple scenarios of transport policy packages. ►Novel approach to modelling demand for new vehicles by market and technology. ►Model available for use by research community via http://www.ukerc.ac.uk/support/tiki-index.php?page=UK+Transport+Carbon+Model.

Integrative Modeling of Electrical Properties of Pacemaker Cardiac Cells

Science.gov (United States)

Grigoriev, M.; Babich, L.

2016-06-01

This work represents modeling of electrical properties of pacemaker (sinus) cardiac cells. Special attention is paid to electrical potential arising from transmembrane current of Na+, K+ and Ca2+ ions. This potential is calculated using the NaCaX model. In this respect, molar concentration of ions in the intercellular space which is calculated on the basis of the GENTEX model is essential. Combined use of two different models allows referring this approach to integrative modeling.

RISK INTEGRATION MECHANISMS AND APPROACHES IN BANKING INDUSTRY

OpenAIRE

JIANPING LI; JICHUANG FENG; XIAOLEI SUN; MINGLU LI

2012-01-01

Recently, the number of consultative documents and research papers that discuss risk integration has grown considerably. This paper presents a comprehensive review of the work done on risk integration in the banking industry. This survey includes: (1) risk integration methods within regulatory frameworks and the banking industry; (2) challenges of risk integration; (3) risk interaction mechanisms; (4) development of risk integration approaches; (5) risk interaction results: diversification ve...

Microbial production of polyhydroxybutyrate with tailor-made properties: an integrated modelling approach and experimental validation.

Science.gov (United States)

Penloglou, Giannis; Chatzidoukas, Christos; Kiparissides, Costas

2012-01-01

The microbial production of polyhydroxybutyrate (PHB) is a complex process in which the final quantity and quality of the PHB depend on a large number of process operating variables. Consequently, the design and optimal dynamic operation of a microbial process for the efficient production of PHB with tailor-made molecular properties is an extremely interesting problem. The present study investigates how key process operating variables (i.e., nutritional and aeration conditions) affect the biomass production rate and the PHB accumulation in the cells and its associated molecular weight distribution. A combined metabolic/polymerization/macroscopic modelling approach, relating the process performance and product quality with the process variables, was developed and validated using an extensive series of experiments and measurements. The model predicts the dynamic evolution of the biomass growth, the polymer accumulation, the consumption of carbon and nitrogen sources and the average molecular weights of the PHB in a bioreactor, under batch and fed-batch operating conditions. The proposed integrated model was used for the model-based optimization of the production of PHB with tailor-made molecular properties in Azohydromonas lata bacteria. The process optimization led to a high intracellular PHB accumulation (up to 95% g of PHB per g of DCW) and the production of different grades (i.e., different molecular weight distributions) of PHB. Copyright © 2011 Elsevier Inc. All rights reserved.

HeartMath and Ubuntu integral healing approaches for social ...

African Journals Online (AJOL)

HeartMath and Ubuntu integral healing approaches for social coherence and physical activity. Stephen D. Edwards. Abstract. This research was motivated by many social health problems confronting planet earth. Its aim is to introduce HeartMath and Ubuntu as complimentary, integral healing approaches for promoting ...

A Stackelberg Game Approach in an Integrated Inventory Model with Carbon-Emission and Setup Cost Reduction

Directory of Open Access Journals (Sweden)

Biswajit Sarkar

2016-12-01

Full Text Available This paper formulates an integrated inventory model that allows Stackelberg game policy for optimizing joint total cost of a vendor and buyer system. After receiving the lot, the buyer commences an inspection process to determine the defective items. All defective items the buyer sends to vendor during the receiving of the next lot. Due to increasing number of shipments fixed and variable transportation, as well as carbon emissions, are considered, which makes the model sustainable integrated model forever. To reduce the setup cost for the vendor, a discrete setup reduction is considered for maximization more profit. The players of the integrated model are with unequal power (as leader and follower and the Stackelberg game strategy is utilized to solve this model for obtaining global optimum solution over the finite planning horizon. An illustrative numerical example is given to understand this model clearly.

Integrated modeling: a look back

Science.gov (United States)

Briggs, Clark

2015-09-01

This paper discusses applications and implementation approaches used for integrated modeling of structural systems with optics over the past 30 years. While much of the development work focused on control system design, significant contributions were made in system modeling and computer-aided design (CAD) environments. Early work appended handmade line-of-sight models to traditional finite element models, such as the optical spacecraft concept from the ACOSS program. The IDEAS2 computational environment built in support of Space Station collected a wider variety of existing tools around a parametric database. Later, IMOS supported interferometer and large telescope mission studies at JPL with MATLAB modeling of structural dynamics, thermal analysis, and geometric optics. IMOS's predecessor was a simple FORTRAN command line interpreter for LQG controller design with additional functions that built state-space finite element models. Specialized language systems such as CAESY were formulated and prototyped to provide more complex object-oriented functions suited to control-structure interaction. A more recent example of optical modeling directly in mechanical CAD is used to illustrate possible future directions. While the value of directly posing the optical metric in system dynamics terms is well understood today, the potential payoff is illustrated briefly via project-based examples. It is quite likely that integrated structure thermal optical performance (STOP) modeling could be accomplished in a commercial off-the-shelf (COTS) tool set. The work flow could be adopted, for example, by a team developing a small high-performance optical or radio frequency (RF) instrument.

Working toward integrated models of alpine plant distribution.

Science.gov (United States)

Carlson, Bradley Z; Randin, Christophe F; Boulangeat, Isabelle; Lavergne, Sébastien; Thuiller, Wilfried; Choler, Philippe

2013-10-01

Species distribution models (SDMs) have been frequently employed to forecast the response of alpine plants to global changes. Efforts to model alpine plant distribution have thus far been primarily based on a correlative approach, in which ecological processes are implicitly addressed through a statistical relationship between observed species occurrences and environmental predictors. Recent evidence, however, highlights the shortcomings of correlative SDMs, especially in alpine landscapes where plant species tend to be decoupled from atmospheric conditions in micro-topographic habitats and are particularly exposed to geomorphic disturbances. While alpine plants respond to the same limiting factors as plants found at lower elevations, alpine environments impose a particular set of scale-dependent and hierarchical drivers that shape the realized niche of species and that require explicit consideration in a modelling context. Several recent studies in the European Alps have successfully integrated both correlative and process-based elements into distribution models of alpine plants, but for the time being a single integrative modelling framework that includes all key drivers remains elusive. As a first step in working toward a comprehensive integrated model applicable to alpine plant communities, we propose a conceptual framework that structures the primary mechanisms affecting alpine plant distributions. We group processes into four categories, including multi-scalar abiotic drivers, gradient dependent species interactions, dispersal and spatial-temporal plant responses to disturbance. Finally, we propose a methodological framework aimed at developing an integrated model to better predict alpine plant distribution.

Conformal field theories, Coulomb gas picture and integrable models

International Nuclear Information System (INIS)

Zuber, J.B.

1988-01-01

The aim of the study is to present the links between some results of conformal field theory, the conventional Coulomb gas picture in statistical mechanics and the approach of integrable models. It is shown that families of conformal theories, related by the coset construction to the SU(2) Kac-Moody algebra, may be regarded as obtained from some free field, and modified by the coupling of its winding numbers to floating charges. This representation reflects the procedure of restriction of the corresponding integrable lattice models. The work may be generalized to models based on the coset construction with higher rank algebras. The corresponding integrable models are identified. In the conformal field description, generalized parafermions appear, and are coupled to free fields living on a higher-dimensional torus. The analysis is not as exhaustive as in the SU(2) case: all the various restrictions have not been identified, nor the modular invariants completely classified

Functional integral approach to classical statistical dynamics

International Nuclear Information System (INIS)

Jensen, R.V.

1980-04-01

A functional integral method is developed for the statistical solution of nonlinear stochastic differential equations which arise in classical dynamics. The functional integral approach provides a very natural and elegant derivation of the statistical dynamical equations that have been derived using the operator formalism of Martin, Siggia, and Rose

An Integrative Model of Internationalization Strategies

DEFF Research Database (Denmark)

Li, Xin; Gammelgaard, Jens

2014-01-01

– The OLI and the UIP models fail to include corporate entrepreneurship and managerial psychology in their analyses. We suggest that regulatory focus theory unifies the managerial strategic choice between position logic and opportunity logic. In addition, host country institutions affect this managerial......Purpose – This paper aims to critically review the ownership, location and internalization (OLI) model and the Uppsala internationalization process (UIP) framework. We suggest that the inclusion of concepts such as corporate entrepreneurship, host country institutions and regulatory focus...... in an integrated framework helps to explain firm internationalization. Design/methodology/approach – This paper is based on a review of the literature on the OLI and UIP models. In addition, it presents a conceptual model that encompasses corporate entrepreneurship, regulatory focus and institutions. Findings...

Regional Integrated Silvopastoral Approaches to Ecosystem Management Project

OpenAIRE

CIPAV (Centre For Research on Sustainable Agricultural Production Systems); CATIE (Centro Agronomico Tropical de Investigacion y Ensenanza); NITLAPAN

2007-01-01

Metadata only record The Regional Integrated Silvopastoral Approaches to Ecosystem Management Project introduces the payment for environmental services approach to silvopastoral farmers in Colombia, Costa Rica, and Nicaragua. The objectives of the project are to "demonstrate and measure a) the effects the introduction of payment incentives for environmental services to farmers on their adoption of integrated silvopastoral farming systems in degraded pasture lands; and b) the resulting impr...

A new Gauss quadrature for multicentre integrals over STOs in the Gaussian integral transform approach

International Nuclear Information System (INIS)

Bouferguene, Ahmed

2005-01-01

When computing multicentre integrals over Slater-type orbitals (STOs) by means of the Shavitt and Karplus Gaussian integral transforms (Shavitt and Karplus 1962 J. Chem. Phys. 36 550), one usually ends up with a multiple integral of the form ∫ 0 1 du ∫ 0 1 dv ...∫ 0 ∞ dz F(u, v, ..., z) (Shavitt and Karplus 1965 J. Chem. Phys. 43 398) in which all the integrals are inter-related. The most widely used approach for computing such an integral is to apply a product of Gauss-Legendre quadratures for the integrals over [0, 1] while the semi-infinite term is evaluated by a special procedure. Although numerous approaches have been developed to accurately perform the integration over [0, ∞) efficiently, it is the aim of this work to add a new tool that could be of some benefit in carrying out the hard task of multicentre integrals over STOs. The new approach relies on a special Gauss quadrature referred to as Gauss-Bessel to accurately evaluate the semi-infinite integral of interest. In this work, emphasis is put on accuracy rather than efficiency since its aim is essentially to bring a proof of concept showing that Gauss-Bessel quadrature can successfully be applied in the context of multicentre integrals over STOs. The obtained accuracy is comparable to that obtained with other methods available in the literature

Development of a landscape integrity model framework to support regional conservation planning.

Science.gov (United States)

Walston, Leroy J; Hartmann, Heidi M

2018-01-01

Land managers increasingly rely upon landscape assessments to understand the status of natural resources and identify conservation priorities. Many of these landscape planning efforts rely on geospatial models that characterize the ecological integrity of the landscape. These general models utilize measures of habitat disturbance and human activity to map indices of ecological integrity. We built upon these modeling frameworks by developing a Landscape Integrity Index (LII) model using geospatial datasets of the human footprint, as well as incorporation of other indicators of ecological integrity such as biodiversity and vegetation departure. Our LII model serves as a general indicator of ecological integrity in a regional context of human activity, biodiversity, and change in habitat composition. We also discuss the application of the LII framework in two related coarse-filter landscape conservation approaches to expand the size and connectedness of protected areas as regional mitigation for anticipated land-use changes.

Using integrated environmental modeling to automate a process-based Quantitative Microbial Risk Assessment

Science.gov (United States)

Integrated Environmental Modeling (IEM) organizes multidisciplinary knowledge that explains and predicts environmental-system response to stressors. A Quantitative Microbial Risk Assessment (QMRA) is an approach integrating a range of disparate data (fate/transport, exposure, an...

Parameter identification and global sensitivity analysis of Xin'anjiang model using meta-modeling approach

Directory of Open Access Journals (Sweden)

Xiao-meng Song

2013-01-01

Full Text Available Parameter identification, model calibration, and uncertainty quantification are important steps in the model-building process, and are necessary for obtaining credible results and valuable information. Sensitivity analysis of hydrological model is a key step in model uncertainty quantification, which can identify the dominant parameters, reduce the model calibration uncertainty, and enhance the model optimization efficiency. There are, however, some shortcomings in classical approaches, including the long duration of time and high computation cost required to quantitatively assess the sensitivity of a multiple-parameter hydrological model. For this reason, a two-step statistical evaluation framework using global techniques is presented. It is based on (1 a screening method (Morris for qualitative ranking of parameters, and (2 a variance-based method integrated with a meta-model for quantitative sensitivity analysis, i.e., the Sobol method integrated with the response surface model (RSMSobol. First, the Morris screening method was used to qualitatively identify the parameters' sensitivity, and then ten parameters were selected to quantify the sensitivity indices. Subsequently, the RSMSobol method was used to quantify the sensitivity, i.e., the first-order and total sensitivity indices based on the response surface model (RSM were calculated. The RSMSobol method can not only quantify the sensitivity, but also reduce the computational cost, with good accuracy compared to the classical approaches. This approach will be effective and reliable in the global sensitivity analysis of a complex large-scale distributed hydrological model.

The elastic body model: a pedagogical approach integrating real time measurements and modelling activities

International Nuclear Information System (INIS)

Fazio, C; Guastella, I; Tarantino, G

2007-01-01

In this paper, we describe a pedagogical approach to elastic body movement based on measurements of the contact times between a metallic rod and small bodies colliding with it and on modelling of the experimental results by using a microcomputer-based laboratory and simulation tools. The experiments and modelling activities have been built in the context of the laboratory of mechanical wave propagation of the two-year graduate teacher education programme of Palermo's University. Some considerations about observed modifications in trainee teachers' attitudes in utilizing experiments and modelling are discussed

Toward an Integrated Psychological Approach - Phase II

International Development Research Centre (IDRC) Digital Library (Canada)

Trauma, Development and Peacebuilding : Toward an Integrated Psychological Approach - Phase II. Over the past decade, the peace, conflict and development community has begun to question the value of medicalized approaches such as post-traumatic stress disorder (PTSD) in dealing with aftermath of political violence ...

RETHINKING THE TRANSLATOR’S ROLE WITHIN THE GILT PROJECT: AN INTEGRATED APPROACH

Directory of Open Access Journals (Sweden)

И Н Ремхе

2017-12-01

Full Text Available Over the last few decades the scope of the translator’s role has extended from being a me-diator between source and target texts and is now seen within a purely linguistic approach to establishing his/her own integrated dynamic reality of digital texts and virtual database. Within an integrated approach, we propose that equivalence can be considered from the neutralized position of a translator who needs to conform with translational norms as well as render the communicative purpose of the sender; the text content includes stylistic peculiarities and non-verbal information. In terms of the localization industry, the leading factor should be translational norms incorporated into the system with the help of special software to determine certain modes of translation, the foreignizing mode, domesticating mode, internationalizing mode, and localization mode. With the GILT paradigm the translation model is developing into a new concept that consolidates complex integrated solutions for the translation process.

Evaluating Information System Integration approaches for fixed asset management framework in Tanzania

Directory of Open Access Journals (Sweden)

Theophil Assey

2017-10-01

Full Text Available Information systems are developed based on different requirements and different technologies. Integration of these systems is of vital importance as they cannot work in isolation, they need to share and exchange data with other information systems. The Information Systems handle data of different types and formats’, finding a way to make them communicate is important as they need to exchange data during transactions, communication and different aspects which may require their interactions. In Tanzanian Local Government Authorities (LGAs, fixed asset data are not centralized, individual Local Government Authority stores their own data in isolation yet accountability is required through the provision of centralized storage for easy data access and easier data integration with other Information Systems in order to enhance fixed asset accountability. The study was carried out through reviewing of literature on the existing Information System integration approaches in order to identify and propose the best approach to be used in fixed asset management systems in LGA’s in Tanzania. The different approaches which are used for systems integration such as Service Oriented Architecture (SOA, Common Object Request Broker (CORBA, Common Object Model (COM and eXtensible Markup Language (XML were evaluated under the factors considered at the LGA. The XML was preferred over SOA, CORBA and COM because of some challenges in governance, data security, availability of expertise for support, maintenance, implementation cost, performance, compliance with government changing policies and service reliability. The proposed approach integrates data for all the Local Government Authorities at a centralized location and middleware transforms the centralized data into XML so it can easily be used by other Information Systems.

Strategic plan modelling by hospital senior administration to integrate diversity management.

Science.gov (United States)

Newhouse, John J

2010-11-01

Limited research suggests that some hospital senior administrators and chief executive officers (CEOs) have employed a strategic planning function to achieve diversity management practices. As the hospital industry struggles with how to integrate diversity practices to improve patient satisfaction, increase the quality of care and enhance clinical outcomes for minority populations, understanding the planning process involved in this endeavour becomes significant for senior hospital administrators. What is not well understood is what this strategic planning process represents and how it is applied to integrate diversity management. Scant research exists about the type of strategic models that hospital CEOs employ when they wish to reposition their organizations through diversity management. This study examines the strategic planning models used by senior administrators to integrate diversity management for an institutional-wide agenda. A qualitative survey process was used for CEOs in the states of New York, Pennsylvania, New Jersey and Delaware. The key research questions dealt with what type of strategic plan approach senior administrators used for integrating diversity management and what rationale they used to pursue this. Significant differences were reported between three types of strategic plan modelling used by CEOs. Also, when comparing past and current practices over time, such differences existed. The need to integrate diversity management is underscored by this study. How senior hospital administrators apply strategic plan models and what impact these approaches have represent the major implications that this study offers.

Thermodynamics and statistical mechanics an integrated approach

CERN Document Server

Shell, M Scott

2015-01-01

Learn classical thermodynamics alongside statistical mechanics with this fresh approach to the subjects. Molecular and macroscopic principles are explained in an integrated, side-by-side manner to give students a deep, intuitive understanding of thermodynamics and equip them to tackle future research topics that focus on the nanoscale. Entropy is introduced from the get-go, providing a clear explanation of how the classical laws connect to the molecular principles, and closing the gap between the atomic world and thermodynamics. Notation is streamlined throughout, with a focus on general concepts and simple models, for building basic physical intuition and gaining confidence in problem analysis and model development. Well over 400 guided end-of-chapter problems are included, addressing conceptual, fundamental, and applied skill sets. Numerous worked examples are also provided together with handy shaded boxes to emphasize key concepts, making this the complete teaching package for students in chemical engineer...

Elements of integrated care approaches for older people: a review of reviews.

Science.gov (United States)

Briggs, Andrew M; Valentijn, Pim P; Thiyagarajan, Jotheeswaran A; Araujo de Carvalho, Islene

2018-04-07

The World Health Organization (WHO) recently proposed an Integrated Care for Older People approach to guide health systems and services in better supporting functional ability of older people. A knowledge gap remains in the key elements of integrated care approaches used in health and social care delivery systems for older populations. The objective of this review was to identify and describe the key elements of integrated care models for elderly people reported in the literature. Review of reviews using a systematic search method. A systematic search was performed in MEDLINE and the Cochrane database in June 2017. Reviews of interventions aimed at care integration at the clinical (micro), organisational/service (meso) or health system (macro) levels for people aged ≥60 years were included. Non-Cochrane reviews published before 2015 were excluded. Reviews were assessed for quality using the Assessment of Multiple Systematic Reviews (AMSTAR) 1 tool. Fifteen reviews (11 systematic reviews, of which six were Cochrane reviews) were included, representing 219 primary studies. Three reviews (20%) included only randomised controlled trials (RCT), while 10 reviews (65%) included both RCTs and non-RCTs. The region where the largest number of primary studies originated was North America (n=89, 47.6%), followed by Europe (n=60, 32.1%) and Oceania (n=31, 16.6%). Eleven (73%) reviews focused on clinical 'micro' and organisational 'meso' care integration strategies. The most commonly reported elements of integrated care models were multidisciplinary teams, comprehensive assessment and case management. Nurses, physiotherapists, general practitioners and social workers were the most commonly reported service providers. Methodological quality was variable (AMSTAR scores: 1-11). Seven (47%) reviews were scored as high quality (AMSTAR score ≥8). Evidence of elements of integrated care for older people focuses particularly on micro clinical care integration processes, while there

Science Teachers’ Pedagogical Content Knowledge and Integrated Approach

Science.gov (United States)

Adi Putra, M. J.; Widodo, A.; Sopandi, W.

2017-09-01

The integrated approach refers to the stages of pupils’ psychological development. Unfortunately, the competences which are designed into the curriculum is not appropriate with the child development. This Manuscript presents PCK (pedagogical content knowledge) of teachers who teach science content utilizing an integrated approach. The data has been collected by using CoRe, PaP-eR, and interviews from six elementary teachers who teach science. The paper informs that high and stable teacher PCKs have an impact on how teachers present integrated teaching. Because it is influenced by the selection of important content that must be submitted to the students, the depth of the content, the reasons for choosing the teaching procedures and some other things. So for teachers to be able to integrate teaching, they should have a balanced PCK.

Integrative computational models of cardiac arrhythmias -- simulating the structurally realistic heart

Science.gov (United States)

Trayanova, Natalia A; Tice, Brock M

2009-01-01

Simulation of cardiac electrical function, and specifically, simulation aimed at understanding the mechanisms of cardiac rhythm disorders, represents an example of a successful integrative multiscale modeling approach, uncovering emergent behavior at the successive scales in the hierarchy of structural complexity. The goal of this article is to present a review of the integrative multiscale models of realistic ventricular structure used in the quest to understand and treat ventricular arrhythmias. It concludes with the new advances in image-based modeling of the heart and the promise it holds for the development of individualized models of ventricular function in health and disease. PMID:20628585

Integrated, regional approach to risk management of industrial systems

International Nuclear Information System (INIS)

Chakraborty, S.

1992-01-01

This paper focuses on the following four main issues: (1) necessity for an integrated, regional approach to risk management of industrial systems; (2) principles of risk management; (3) integrated approach and overall methodology; and (4) implementation of risk management strategies on a regional basis. The U.N. Interagency project on risk management for large industrial areas, which is a pioneer type of international initiative for an integrated approach to risk management, is discussed in this context. Another encouraging activity for further development of overall methodologies for risk management is the ongoing project on the risk and safety of technical systems at the Swiss Federal Institute of Technology in Aurich. The concept of integral risk management takes into account multidimensional factors including technical, economic, political, social, and ethical considerations to allow a well-balanced decision-making process

Top-Down Enterprise Application Integration with Reference Models

Directory of Open Access Journals (Sweden)

Willem-Jan van den Heuvel

2000-11-01

Full Text Available For Enterprise Resource Planning (ERP systems such as SAP R/3 or IBM SanFrancisco, the tailoring of reference models for customizing the ERP systems to specific organizational contexts is an established approach. In this paper, we present a methodology that uses such reference models as a starting point for a top-down integration of enterprise applications. The re-engineered models of legacy systems are individually linked via cross-mapping specifications to the forward-engineered reference model's specification. The actual linking of reference and legacy models is done with a methodology for connecting (new business objects with (old legacy systems.

Models for integrated components coupled with their EM environment

NARCIS (Netherlands)

Ioan, D.; Schilders, W.H.A.; Ciuprina, G.; Meijs, van der N.P.; Schoenmaker, W.

2008-01-01

Abstract: Purpose – The main aim of this study is the modelling of the interaction of on-chip components with their electromagnetic environment. Design/methodology/approach – The integrated circuit is decomposed in passive and active components interconnected by means of terminals and connectors

An Integrated Approach to Biology

Indian Academy of Sciences (India)

Home; Journals; Resonance – Journal of Science Education; Volume 16; Issue 8. An Integrated Approach to Biology. Aniket Bhattacharya. General Article Volume 16 Issue 8 August 2011 pp 742-753. Fulltext. Click here to view fulltext PDF. Permanent link: https://www.ias.ac.in/article/fulltext/reso/016/08/0742-0753 ...

Dynamic optimal control of homeostasis: an integrative system approach for modeling of the central nitrogen metabolism in Saccharomyces cerevisiae.

Science.gov (United States)

van Riel, N A; Giuseppin, M L; Verrips, C T

2000-01-01

The theory of dynamic optimal metabolic control (DOMC), as developed by Giuseppin and Van Riel (Metab. Eng., 2000), is applied to model the central nitrogen metabolism (CNM) in Saccharomyces cerevisiae. The CNM represents a typical system encountered in advanced metabolic engineering. The CNM is the source of the cellular amino acids and proteins, including flavors and potentially valuable biomolecules; therefore, it is also of industrial interest. In the DOMC approach the cell is regarded as an optimally controlled system. Given the metabolic genotype, the cell faces a control problem to maintain an optimal flux distribution in a changing environment. The regulation is based on strategies and balances feedback control of homeostasis and feedforward regulation for adaptation. The DOMC approach is an integrative, holistic approach, not based on mechanistic descriptions and (therefore) not biased by the variation present in biochemical and molecular biological data. It is an effective tool to structure the rapidly increasing amount of data on the function of genes and pathways. The DOMC model is used successfully to predict the responses of pulses of ammonia and glutamine to nitrogen-limited continuous cultures of a wild-type strain and a glutamine synthetase-negative mutant. The simulation results are validated with experimental data.

Integrated modelling of nitrate loads to coastal waters and land rent applied to catchment-scale water management

DEFF Research Database (Denmark)

Refsgaard, A.; Jacobsen, T.; Jacobsen, Brian H.

2007-01-01

The EU Water Framework Directive (WFD) requires an integrated approach to river basin management in order to meet environmental and ecological objectives. This paper presents concepts and full-scale application of an integrated modelling framework. The Ringkoebing Fjord basin is characterized by ...... the potential and limitations of comprehensive, integrated modelling tools.  ......The EU Water Framework Directive (WFD) requires an integrated approach to river basin management in order to meet environmental and ecological objectives. This paper presents concepts and full-scale application of an integrated modelling framework. The Ringkoebing Fjord basin is characterized...... by intensive agricultural production and leakage of nitrate constitute a major pollution problem with respect groundwater aquifers (drinking water), fresh surface water systems (water quality of lakes) and coastal receiving waters (eutrophication). The case study presented illustrates an advanced modelling...

Optimal unit sizing for small-scale integrated energy systems using multi-objective interval optimization and evidential reasoning approach

International Nuclear Information System (INIS)

Wei, F.; Wu, Q.H.; Jing, Z.X.; Chen, J.J.; Zhou, X.X.

2016-01-01

This paper proposes a comprehensive framework including a multi-objective interval optimization model and evidential reasoning (ER) approach to solve the unit sizing problem of small-scale integrated energy systems, with uncertain wind and solar energies integrated. In the multi-objective interval optimization model, interval variables are introduced to tackle the uncertainties of the optimization problem. Aiming at simultaneously considering the cost and risk of a business investment, the average and deviation of life cycle cost (LCC) of the integrated energy system are formulated. In order to solve the problem, a novel multi-objective optimization algorithm, MGSOACC (multi-objective group search optimizer with adaptive covariance matrix and chaotic search), is developed, employing adaptive covariance matrix to make the search strategy adaptive and applying chaotic search to maintain the diversity of group. Furthermore, ER approach is applied to deal with multiple interests of an investor at the business decision making stage and to determine the final unit sizing solution from the Pareto-optimal solutions. This paper reports on the simulation results obtained using a small-scale direct district heating system (DH) and a small-scale district heating and cooling system (DHC) optimized by the proposed framework. The results demonstrate the superiority of the multi-objective interval optimization model and ER approach in tackling the unit sizing problem of integrated energy systems considering the integration of uncertian wind and solar energies. - Highlights: • Cost and risk of investment in small-scale integrated energy systems are considered. • A multi-objective interval optimization model is presented. • A novel multi-objective optimization algorithm (MGSOACC) is proposed. • The evidential reasoning (ER) approach is used to obtain the final optimal solution. • The MGSOACC and ER can tackle the unit sizing problem efficiently.

Climate change impact assessment on Veneto and Friuli plain groundwater. Part I: An integrated modeling approach for hazard scenario construction

International Nuclear Information System (INIS)

Baruffi, F.; Cisotto, A.; Cimolino, A.; Ferri, M.; Monego, M.; Norbiato, D.; Cappelletto, M.; Bisaglia, M.; Pretner, A.; Galli, A.; Scarinci, A.; Marsala, V.; Panelli, C.; Gualdi, S.; Bucchignani, E.; Torresan, S.; Pasini, S.; Critto, A.

2012-01-01

Climate change impacts on water resources, particularly groundwater, is a highly debated topic worldwide, triggering international attention and interest from both researchers and policy makers due to its relevant link with European water policy directives (e.g. 2000/60/EC and 2007/118/EC) and related environmental objectives. The understanding of long-term impacts of climate variability and change is therefore a key challenge in order to address effective protection measures and to implement sustainable management of water resources. This paper presents the modeling approach adopted within the Life + project TRUST (Tool for Regional-scale assessment of groUndwater Storage improvement in adaptation to climaTe change) in order to provide climate change hazard scenarios for the shallow groundwater of high Veneto and Friuli Plain, Northern Italy. Given the aim to evaluate potential impacts on water quantity and quality (e.g. groundwater level variation, decrease of water availability for irrigation, variations of nitrate infiltration processes), the modeling approach integrated an ensemble of climate, hydrologic and hydrogeologic models running from the global to the regional scale. Global and regional climate models and downscaling techniques were used to make climate simulations for the reference period 1961–1990 and the projection period 2010–2100. The simulation of the recent climate was performed using observed radiative forcings, whereas the projections have been done prescribing the radiative forcings according to the IPCC A1B emission scenario. The climate simulations and the downscaling, then, provided the precipitation, temperatures and evapo-transpiration fields used for the impact analysis. Based on downscaled climate projections, 3 reference scenarios for the period 2071–2100 (i.e. the driest, the wettest and the mild year) were selected and used to run a regional geomorphoclimatic and hydrogeological model. The final output of the model ensemble

Climate change impact assessment on Veneto and Friuli plain groundwater. Part I: An integrated modeling approach for hazard scenario construction

Energy Technology Data Exchange (ETDEWEB)

Baruffi, F. [Autorita di Bacino dei Fiumi dell' Alto Adriatico, Cannaregio 4314, 30121 Venice (Italy); Cisotto, A., E-mail: segreteria@adbve.it [Autorita di Bacino dei Fiumi dell' Alto Adriatico, Cannaregio 4314, 30121 Venice (Italy); Cimolino, A.; Ferri, M.; Monego, M.; Norbiato, D.; Cappelletto, M.; Bisaglia, M. [Autorita di Bacino dei Fiumi dell' Alto Adriatico, Cannaregio 4314, 30121 Venice (Italy); Pretner, A.; Galli, A. [SGI Studio Galli Ingegneria, via della Provvidenza 13, 35030 Sarmeola di Rubano (PD) (Italy); Scarinci, A., E-mail: andrea.scarinci@sgi-spa.it [SGI Studio Galli Ingegneria, via della Provvidenza 13, 35030 Sarmeola di Rubano (PD) (Italy); Marsala, V.; Panelli, C. [SGI Studio Galli Ingegneria, via della Provvidenza 13, 35030 Sarmeola di Rubano (PD) (Italy); Gualdi, S., E-mail: silvio.gualdi@bo.ingv.it [Centro Euro-Mediterraneo per i Cambiamenti Climatici (CMCC), via Augusto Imperatore 16, 73100 Lecce (Italy); Bucchignani, E., E-mail: e.bucchignani@cira.it [Centro Euro-Mediterraneo per i Cambiamenti Climatici (CMCC), via Augusto Imperatore 16, 73100 Lecce (Italy); Torresan, S., E-mail: torresan@cmcc.it [Centro Euro-Mediterraneo per i Cambiamenti Climatici (CMCC), via Augusto Imperatore 16, 73100 Lecce (Italy); Pasini, S., E-mail: sara.pasini@stud.unive.it [Centro Euro-Mediterraneo per i Cambiamenti Climatici (CMCC), via Augusto Imperatore 16, 73100 Lecce (Italy); Department of Environmental Sciences, Informatics and Statistics, University Ca' Foscari Venice, Calle Larga S. Marta 2137, 30123 Venice (Italy); Critto, A., E-mail: critto@unive.it [Centro Euro-Mediterraneo per i Cambiamenti Climatici (CMCC), via Augusto Imperatore 16, 73100 Lecce (Italy); Department of Environmental Sciences, Informatics and Statistics, University Ca' Foscari Venice, Calle Larga S. Marta 2137, 30123 Venice (Italy); and others

2012-12-01

Climate change impacts on water resources, particularly groundwater, is a highly debated topic worldwide, triggering international attention and interest from both researchers and policy makers due to its relevant link with European water policy directives (e.g. 2000/60/EC and 2007/118/EC) and related environmental objectives. The understanding of long-term impacts of climate variability and change is therefore a key challenge in order to address effective protection measures and to implement sustainable management of water resources. This paper presents the modeling approach adopted within the Life + project TRUST (Tool for Regional-scale assessment of groUndwater Storage improvement in adaptation to climaTe change) in order to provide climate change hazard scenarios for the shallow groundwater of high Veneto and Friuli Plain, Northern Italy. Given the aim to evaluate potential impacts on water quantity and quality (e.g. groundwater level variation, decrease of water availability for irrigation, variations of nitrate infiltration processes), the modeling approach integrated an ensemble of climate, hydrologic and hydrogeologic models running from the global to the regional scale. Global and regional climate models and downscaling techniques were used to make climate simulations for the reference period 1961-1990 and the projection period 2010-2100. The simulation of the recent climate was performed using observed radiative forcings, whereas the projections have been done prescribing the radiative forcings according to the IPCC A1B emission scenario. The climate simulations and the downscaling, then, provided the precipitation, temperatures and evapo-transpiration fields used for the impact analysis. Based on downscaled climate projections, 3 reference scenarios for the period 2071-2100 (i.e. the driest, the wettest and the mild year) were selected and used to run a regional geomorphoclimatic and hydrogeological model. The final output of the model ensemble produced

A new approach to integrate seismic and production data in reservoir models

Energy Technology Data Exchange (ETDEWEB)

Ouenes, A.; Chawathe, A.; Weiss, W. [New Mexico Tech, Socorro, NM (United States)] [and others

1997-08-01

A great deal of effort is devoted to reducing the uncertainties in reservoir modeling. For example, seismic properties are used to improve the characterization of interwell properties by providing porosity maps constrained to seismic impedance. Another means to reduce uncertainties is to constrain the reservoir model to production data. This paper describes a new approach where the production and seismic data are simultaneously used to reduce the uncertainties. In this new approach, the primary geologic parameter that controls reservoir properties is identified. Next, the geophysical parameter that is sensitive to the dominant geologic parameter is determined. Then the geology and geophysics are linked using analytic correlations. Unfortunately, the initial guess resulted in a reservoir model that did not match the production history. Since the time required for trial and error matching of production history is exorbitant, an automatic history matching method based on a fast optimization method was used to find the correlating parameters. This new approach was illustrated with an actual field in the Williston Basin. Upscalling problems do not arise since the scale is imposed by the size of the seismic bin (66m, 219 ft) which is the size of the simulator gridblocks.

The development of a fully-integrated immune response model (FIRM) simulator of the immune response through integration of multiple subset models.

Science.gov (United States)

Palsson, Sirus; Hickling, Timothy P; Bradshaw-Pierce, Erica L; Zager, Michael; Jooss, Karin; O'Brien, Peter J; Spilker, Mary E; Palsson, Bernhard O; Vicini, Paolo

2013-09-28

The complexity and multiscale nature of the mammalian immune response provides an excellent test bed for the potential of mathematical modeling and simulation to facilitate mechanistic understanding. Historically, mathematical models of the immune response focused on subsets of the immune system and/or specific aspects of the response. Mathematical models have been developed for the humoral side of the immune response, or for the cellular side, or for cytokine kinetics, but rarely have they been proposed to encompass the overall system complexity. We propose here a framework for integration of subset models, based on a system biology approach. A dynamic simulator, the Fully-integrated Immune Response Model (FIRM), was built in a stepwise fashion by integrating published subset models and adding novel features. The approach used to build the model includes the formulation of the network of interacting species and the subsequent introduction of rate laws to describe each biological process. The resulting model represents a multi-organ structure, comprised of the target organ where the immune response takes place, circulating blood, lymphoid T, and lymphoid B tissue. The cell types accounted for include macrophages, a few T-cell lineages (cytotoxic, regulatory, helper 1, and helper 2), and B-cell activation to plasma cells. Four different cytokines were accounted for: IFN-γ, IL-4, IL-10 and IL-12. In addition, generic inflammatory signals are used to represent the kinetics of IL-1, IL-2, and TGF-β. Cell recruitment, differentiation, replication, apoptosis and migration are described as appropriate for the different cell types. The model is a hybrid structure containing information from several mammalian species. The structure of the network was built to be physiologically and biochemically consistent. Rate laws for all the cellular fate processes, growth factor production rates and half-lives, together with antibody production rates and half-lives, are provided. The

Business model driven service architecture design for enterprise application integration

OpenAIRE

Gacitua-Decar, Veronica; Pahl, Claus

2008-01-01

Increasingly, organisations are using a Service-Oriented Architecture (SOA) as an approach to Enterprise Application Integration (EAI), which is required for the automation of business processes. This paper presents an architecture development process which guides the transition from business models to a service-based software architecture. The process is supported by business reference models and patterns. Firstly, the business process models are enhanced with domain model elements, applicat...

Critical Perspectives of Pedagogical Approaches to Reversing the Order of Integration in Double Integrals

Science.gov (United States)

Tisdell, Christopher C.

2017-01-01

This paper presents some critical perspectives regarding pedagogical approaches to the method of reversing the order of integration in double integrals from prevailing educational literature on multivariable calculus. First, we question the message found in popular textbooks that the traditional process of reversing the order of integration is…

Supporting teachers integrating web 2.0 in a Problem Based Learning approach

DEFF Research Database (Denmark)

Buus, Lillian

2010-01-01

Based on theoretical and methodological considerations within problem-based learning (PBL), web 2.0 technologies and learning designs, the article try to illustrate a design model for supporting teachers in their learning design trying to integrate web 2.0 technologies into their PBL approach...... that a transition from curriculum-based teaching to PBL entails a movement from a teacher-centered approach to a learner-centered approach [4],[5]. This move can in many ways be compared to the conceptual move from web 1.0 to web 2.0 that by some is seen as a transition from ‘users/learners as consumers’ towards...... ‘users/learners as producers’ [6]. Consequently, it makes good sense to connect Web 2.0 with a problem-based approach to learning. Therefore it’s interesting to look upon a learning design model supporting teachers at AAU in their pedagogical design combining these two. The Collaborative E...

A model-driven approach to information security compliance

Science.gov (United States)

Correia, Anacleto; Gonçalves, António; Teodoro, M. Filomena

2017-06-01

The availability, integrity and confidentiality of information are fundamental to the long-term survival of any organization. Information security is a complex issue that must be holistically approached, combining assets that support corporate systems, in an extended network of business partners, vendors, customers and other stakeholders. This paper addresses the conception and implementation of information security systems, conform the ISO/IEC 27000 set of standards, using the model-driven approach. The process begins with the conception of a domain level model (computation independent model) based on information security vocabulary present in the ISO/IEC 27001 standard. Based on this model, after embedding in the model mandatory rules for attaining ISO/IEC 27001 conformance, a platform independent model is derived. Finally, a platform specific model serves the base for testing the compliance of information security systems with the ISO/IEC 27000 set of standards.

THE FEMINIST APPROACH TO PSYCHOTHERAPY INTEGRATION

Directory of Open Access Journals (Sweden)

Lorena Božac Deležan

2011-12-01

Full Text Available The goal of Integrative Psychotherapy is to establish full inner and external contact (Moursund & Erskine, 2004. The most important goal in feminist therapy is the transformation of an individual as well as the transformation of the society as a whole (Herlihy & Corey, 2004. In my work I attempt to integrate both: to help the client establish inner and external contact, but also help him/her to become aware and recognize inner messages connected with his/her gender and replace them with constructive beliefs of his/her own, as well as for him/her to learn, regardless of his/her gender, to trust his/her intuition and experience. In this article I present my approach to integration in psychotherapy and the way I use feminist principles in Integrative Psychotherapy.

Integrated oncogeriatric approach: a systematic review of the literature using concept analysis.

Science.gov (United States)

Tremblay, Dominique; Charlebois, Kathleen; Terret, Catherine; Joannette, Sonia; Latreille, Jean

2012-01-01

The purpose of this study was to provide a more precise definition of an integrated oncogeriatric approach (IOGA) through concept analysis. The literature was reviewed from January 2005 to April 2011 integrating three broad terms: geriatric oncology, multidisciplinarity and integrated care delivery models. Citation selection was based on: (1) elderly cancer patients as the study population; (2) disease management and (3) case studies, intervention studies, assessments, evaluations and studies. Inclusion and exclusion criteria were refined in the course of the literature search. Initiatives in geriatric oncology that relate to oncology services, social support services and primary care services for elderly cancer patients. Elderly cancer patients aged 70 years old or more. Rodgers' concept analysis method was used for this study. The analysis was carried out according to thematic analysis based on the elements of the Chronic Care Model. The search identified 618 citations. After in-depth appraisal of 327 potential citations, 62 articles that met our inclusion criteria were included in the analysis. Three IOGA main attributes were identified, which constitute IOGA's core aspects: geriatric assessment (GA), comorbidity burden and treatment outcomes. The IOGA concept comprises two broad antecedents: coordinated healthcare delivery and primary supportive care services. Regarding the consequents of an integrated approach in geriatric oncology, the studies reviewed remain inconclusive. Our study highlights the pioneering character of the multidimensional IOGA concept, for which the relationship between clinical and organisational attributes, on the one hand, and contextual antecedents, on the other, is not well understood. We have yet to ascertain IOGA's consequents. IMPLICATIONS OF KEY FINDINGS: There is clearly a need for a whole-system approach to change that will provide direction for multilevel (clinical, organisational, strategic) interventions to support

Diverse methods for integrable models

NARCIS (Netherlands)

Fehér, G.

2017-01-01

This thesis is centered around three topics, sharing integrability as a common theme. This thesis explores different methods in the field of integrable models. The first two chapters are about integrable lattice models in statistical physics. The last chapter describes an integrable quantum chain.

Integrating systems Approaches into Pharmaceutical Sciences

DEFF Research Database (Denmark)

Westerhoff, H.V.; Mosekilde, Erik; Noe, C. R.

2008-01-01

During the first week of December 2007, the European Federation for Pharmaceutical Sciences (EUFEPS) and BioSim, the major European Network of Excellence on Systems Biology, held a challenging conference on the use of mathematical models in the drug development process. More precisely, the purpose...... of the conference was to promote the ‘Integration of Systems Approaches into Pharmaceutical Sciences’ in view of optimising the development of new effective drugs. And a challenge this is, considering both the high attrition rates in the pharmaceutical industry and the failure of finding definitive drug solutions...... for many of the diseases that plague mankind today. The conference was co-sponsored by the American College of Clinical Pharmacology, the European Center for Pharmaceutical Medicine, and the Swiss Society of Pharmaceutical Sciences and, besides representatives from the European Regulatory Agencies and FDA...

A study of multidimensional modeling approaches for data warehouse

Science.gov (United States)

Yusof, Sharmila Mat; Sidi, Fatimah; Ibrahim, Hamidah; Affendey, Lilly Suriani

2016-08-01

Data warehouse system is used to support the process of organizational decision making. Hence, the system must extract and integrate information from heterogeneous data sources in order to uncover relevant knowledge suitable for decision making process. However, the development of data warehouse is a difficult and complex process especially in its conceptual design (multidimensional modeling). Thus, there have been various approaches proposed to overcome the difficulty. This study surveys and compares the approaches of multidimensional modeling and highlights the issues, trend and solution proposed to date. The contribution is on the state of the art of the multidimensional modeling design.

Beyond the buildingcentric approach: A vision for an integrated evaluation of sustainable buildings

International Nuclear Information System (INIS)

Conte, Emilia; Monno, Valeria

2012-01-01

The available sustainable building evaluation systems have produced a new environmental design paradigm. However, there is an increasing need to overcome the buildingcentric approach of these systems, in order to further exploit their innovate potential for sustainable building practices. The paper takes this challenge by developing a cross-scale evaluation approach focusing on the reliability of sustainable building design solutions for the context in which the building is situated. An integrated building–urban evaluation model is proposed based on the urban matrix, which is a conceptualisation of the built environment as a social–ecological system. The model aims at evaluating the sustainability of a building considering it as an active entity contributing to the resilience of the urban matrix. Few holistic performance indicators are used for evaluating such contribution, so expressing the building reliability. The discussion on the efficacy of the model shows that it works as a heuristic tool, supporting the acquisition of a better insight into the complexity which characterises the relationships between the building and the built environment sustainability. Shading new lights on the meaning of sustainable buildings, the model can play a positive role in innovating sustainable building design practices, thus complementing current evaluation systems. - Highlights: ► We model an integrated building–urban evaluation approach. ► The urban matrix represents the social–ecological functioning of the urban context. ► We introduce the concept of reliability to evaluate sustainable buildings. ► Holistic indicators express the building reliability. ► The evaluation model works as heuristic tool and complements other tools.

Integrating macro and micro scale approaches in the agent-based modeling of residential dynamics

Science.gov (United States)

Saeedi, Sara

2018-06-01

With the advancement of computational modeling and simulation (M&S) methods as well as data collection technologies, urban dynamics modeling substantially improved over the last several decades. The complex urban dynamics processes are most effectively modeled not at the macro-scale, but following a bottom-up approach, by simulating the decisions of individual entities, or residents. Agent-based modeling (ABM) provides the key to a dynamic M&S framework that is able to integrate socioeconomic with environmental models, and to operate at both micro and macro geographical scales. In this study, a multi-agent system is proposed to simulate residential dynamics by considering spatiotemporal land use changes. In the proposed ABM, macro-scale land use change prediction is modeled by Artificial Neural Network (ANN) and deployed as the agent environment and micro-scale residential dynamics behaviors autonomously implemented by household agents. These two levels of simulation interacted and jointly promoted urbanization process in an urban area of Tehran city in Iran. The model simulates the behavior of individual households in finding ideal locations to dwell. The household agents are divided into three main groups based on their income rank and they are further classified into different categories based on a number of attributes. These attributes determine the households' preferences for finding new dwellings and change with time. The ABM environment is represented by a land-use map in which the properties of the land parcels change dynamically over the simulation time. The outputs of this model are a set of maps showing the pattern of different groups of households in the city. These patterns can be used by city planners to find optimum locations for building new residential units or adding new services to the city. The simulation results show that combining macro- and micro-level simulation can give full play to the potential of the ABM to understand the driving

An Approach to Enforcing Clark-Wilson Model in Role-based Access Control Model

Institute of Scientific and Technical Information of China (English)

LIANGBin; SHIWenchang; SUNYufang; SUNBo

2004-01-01

Using one security model to enforce another is a prospective solution to multi-policy support. In this paper, an approach to the enforcing Clark-Wilson data integrity model in the Role-based access control (RBAC) model is proposed. An enforcement construction with great feasibility is presented. In this construction, a direct way to enforce the Clark-Wilson model is provided, the corresponding relations among users, transformation procedures, and constrained data items are strengthened; the concepts of task and subtask are introduced to enhance the support to least-privilege. The proposed approach widens the applicability of RBAC. The theoretical foundation for adopting Clark-Wilson model in a RBAC system with small cost is offered to meet the requirements of multi-policy support and policy flexibility.

Automating an integrated spatial data-mining model for landfill site selection

Science.gov (United States)

Abujayyab, Sohaib K. M.; Ahamad, Mohd Sanusi S.; Yahya, Ahmad Shukri; Ahmad, Siti Zubaidah; Aziz, Hamidi Abdul

2017-10-01

An integrated programming environment represents a robust approach to building a valid model for landfill site selection. One of the main challenges in the integrated model is the complicated processing and modelling due to the programming stages and several limitations. An automation process helps avoid the limitations and improve the interoperability between integrated programming environments. This work targets the automation of a spatial data-mining model for landfill site selection by integrating between spatial programming environment (Python-ArcGIS) and non-spatial environment (MATLAB). The model was constructed using neural networks and is divided into nine stages distributed between Matlab and Python-ArcGIS. A case study was taken from the north part of Peninsular Malaysia. 22 criteria were selected to utilise as input data and to build the training and testing datasets. The outcomes show a high-performance accuracy percentage of 98.2% in the testing dataset using 10-fold cross validation. The automated spatial data mining model provides a solid platform for decision makers to performing landfill site selection and planning operations on a regional scale.

Web Approach for Ontology-Based Classification, Integration, and Interdisciplinary Usage of Geoscience Metadata

Directory of Open Access Journals (Sweden)

B Ritschel

2012-10-01

Full Text Available The Semantic Web is a W3C approach that integrates the different sources of semantics within documents and services using ontology-based techniques. The main objective of this approach in the geoscience domain is the improvement of understanding, integration, and usage of Earth and space science related web content in terms of data, information, and knowledge for machines and people. The modeling and representation of semantic attributes and relations within and among documents can be realized by human readable concept maps and machine readable OWL documents. The objectives for the usage of the Semantic Web approach in the GFZ data center ISDC project are the design of an extended classification of metadata documents for product types related to instruments, platforms, and projects as well as the integration of different types of metadata related to data product providers, users, and data centers. Sources of content and semantics for the description of Earth and space science product types and related classes are standardized metadata documents (e.g., DIF documents, publications, grey literature, and Web pages. Other sources are information provided by users, such as tagging data and social navigation information. The integration of controlled vocabularies as well as folksonomies plays an important role in the design of well formed ontologies.

An integrated approach to addressing addiction and depression in college students.

Science.gov (United States)

Eisen, Arri; Kushner, Howard; McLeod, Mark; Queen, Edward; Gordon, Jonathan; Ford, John L

2009-01-01

The authors present an integrated, interdisciplinary approach to address the problem of increasing student mental health issues on college campuses. The model uses addiction and depression as lenses into the problem and links residence life and academic and community internship experiences. The project has a positive impact on student attitudes and actions and strengthens and broadens the campus network required to ensure optimal student mental health.

Integrated System Health Management: Foundational Concepts, Approach, and Implementation.

Science.gov (United States)

Figueroa, Fernando; Schmalzel, John; Walker, Mark; Venkatesh, Meera; Kapadia, Ravi; Morris, Jon; Turowski, Mark; Smith, Harvey

2009-01-01

Implementation of integrated system health management (ISHM) capability is fundamentally linked to the management of data, information, and knowledge (DIaK) with the purposeful objective of determining the health of a system. It is akin to having a team of experts who are all individually and collectively observing and analyzing a complex system, and communicating effectively with each other in order to arrive to an accurate and reliable assessment of its health. We present concepts, procedures, and a specific approach as a foundation for implementing a credible ISHM capability. The capability stresses integration of DIaK from all elements of a system. The intent is also to make possible implementation of on-board ISHM capability, in contrast to a remote capability. The information presented is the result of many years of research, development, and maturation of technologies, and of prototype implementations in operational systems (rocket engine test facilities). The paper will address the following topics: 1. ISHM Model of a system 2. Detection of anomaly indicators. 3. Determination and confirmation of anomalies. 4. Diagnostic of causes and determination of effects. 5. Consistency checking cycle. 6. Management of health information 7. User Interfaces 8. Example implementation ISHM has been defined from many perspectives. We define it as a capability that might be achieved by various approaches. We describe a specific approach that has been matured throughout many years of development, and pilot implementations. ISHM is a capability that is achieved by integrating data, information, and knowledge (DIaK) that might be distributed throughout the system elements (which inherently implies capability to manage DIaK associated with distributed sub-systems). DIaK must be available to any element of a system at the right time and in accordance with a meaningful context. ISHM Functional Capability Level (FCL) is measured by how well a system performs the following

Integrated survival analysis using an event-time approach in a Bayesian framework.

Science.gov (United States)

Walsh, Daniel P; Dreitz, Victoria J; Heisey, Dennis M

2015-02-01

Event-time or continuous-time statistical approaches have been applied throughout the biostatistical literature and have led to numerous scientific advances. However, these techniques have traditionally relied on knowing failure times. This has limited application of these analyses, particularly, within the ecological field where fates of marked animals may be unknown. To address these limitations, we developed an integrated approach within a Bayesian framework to estimate hazard rates in the face of unknown fates. We combine failure/survival times from individuals whose fates are known and times of which are interval-censored with information from those whose fates are unknown, and model the process of detecting animals with unknown fates. This provides the foundation for our integrated model and permits necessary parameter estimation. We provide the Bayesian model, its derivation, and use simulation techniques to investigate the properties and performance of our approach under several scenarios. Lastly, we apply our estimation technique using a piece-wise constant hazard function to investigate the effects of year, age, chick size and sex, sex of the tending adult, and nesting habitat on mortality hazard rates of the endangered mountain plover (Charadrius montanus) chicks. Traditional models were inappropriate for this analysis because fates of some individual chicks were unknown due to failed radio transmitters. Simulations revealed biases of posterior mean estimates were minimal (≤ 4.95%), and posterior distributions behaved as expected with RMSE of the estimates decreasing as sample sizes, detection probability, and survival increased. We determined mortality hazard rates for plover chicks were highest at birth weights and/or whose nest was within agricultural habitats. Based on its performance, our approach greatly expands the range of problems for which event-time analyses can be used by eliminating the need for having completely known fate data.

Integrated survival analysis using an event-time approach in a Bayesian framework

Science.gov (United States)

Walsh, Daniel P.; Dreitz, VJ; Heisey, Dennis M.

2015-01-01

Event-time or continuous-time statistical approaches have been applied throughout the biostatistical literature and have led to numerous scientific advances. However, these techniques have traditionally relied on knowing failure times. This has limited application of these analyses, particularly, within the ecological field where fates of marked animals may be unknown. To address these limitations, we developed an integrated approach within a Bayesian framework to estimate hazard rates in the face of unknown fates. We combine failure/survival times from individuals whose fates are known and times of which are interval-censored with information from those whose fates are unknown, and model the process of detecting animals with unknown fates. This provides the foundation for our integrated model and permits necessary parameter estimation. We provide the Bayesian model, its derivation, and use simulation techniques to investigate the properties and performance of our approach under several scenarios. Lastly, we apply our estimation technique using a piece-wise constant hazard function to investigate the effects of year, age, chick size and sex, sex of the tending adult, and nesting habitat on mortality hazard rates of the endangered mountain plover (Charadrius montanus) chicks. Traditional models were inappropriate for this analysis because fates of some individual chicks were unknown due to failed radio transmitters. Simulations revealed biases of posterior mean estimates were minimal (≤ 4.95%), and posterior distributions behaved as expected with RMSE of the estimates decreasing as sample sizes, detection probability, and survival increased. We determined mortality hazard rates for plover chicks were highest at birth weights and/or whose nest was within agricultural habitats. Based on its performance, our approach greatly expands the range of problems for which event-time analyses can be used by eliminating the need for having completely known fate data.

Delineating the structure of normal and abnormal personality: an integrative hierarchical approach.

Science.gov (United States)

Markon, Kristian E; Krueger, Robert F; Watson, David

2005-01-01

Increasing evidence indicates that normal and abnormal personality can be treated within a single structural framework. However, identification of a single integrated structure of normal and abnormal personality has remained elusive. Here, a constructive replication approach was used to delineate an integrative hierarchical account of the structure of normal and abnormal personality. This hierarchical structure, which integrates many Big Trait models proposed in the literature, replicated across a meta-analysis as well as an empirical study, and across samples of participants as well as measures. The proposed structure resembles previously suggested accounts of personality hierarchy and provides insight into the nature of personality hierarchy more generally. Potential directions for future research on personality and psychopathology are discussed.

Delineating the Structure of Normal and Abnormal Personality: An Integrative Hierarchical Approach

Science.gov (United States)

Markon, Kristian E.; Krueger, Robert F.; Watson, David

2008-01-01

Increasing evidence indicates that normal and abnormal personality can be treated within a single structural framework. However, identification of a single integrated structure of normal and abnormal personality has remained elusive. Here, a constructive replication approach was used to delineate an integrative hierarchical account of the structure of normal and abnormal personality. This hierarchical structure, which integrates many Big Trait models proposed in the literature, replicated across a meta-analysis as well as an empirical study, and across samples of participants as well as measures. The proposed structure resembles previously suggested accounts of personality hierarchy and provides insight into the nature of personality hierarchy more generally. Potential directions for future research on personality and psychopathology are discussed. PMID:15631580

Approaches to the summability of divergent multidimensional integrals

International Nuclear Information System (INIS)

Vainikko, G M; Lifanov, I K

2003-01-01

Under discussion are various approaches to the concept of summability (finding the finite part - (f.p.)) of divergent integrals with integrand represented as a product of two functions, one with a parameter-dependent non-integrable singularity at one point of the integration and the other absolutely integrable. A study is made of summability methods which are based on the expansion of the absolutely integrable function in a Taylor series with centre at the singular point (f.p.), on the analytic continuation with respect to the parameter of the singularity (a.f.p.), and on integration by parts (f.p.p.). Formulae of changes of variables in such integrals are presented

An integrated approach for microstructure simulation: Application to nickel-aluminum-molybdenum alloys

Science.gov (United States)

Wang, Tao

The properties and performance of a material are strongly dependent on its microstructure. For example, the gamma' precipitate coherently embedded in the gamma matrix is the primary strengthening phase in Ni-base superalloys, and its volume fraction, morphology and size distribution largely determine the strength, fatigue and creep properties of an alloy. In the present study, a multiscale computational approach was proposed to predict the microstructure evolution in Ni-base superalloys. It integrated a quantitative phase-field model with first-principles calculations as well as the CALPHAD (CALculation of PHAse Diagram) technique. Fundamental materials property databases such as lattice parameters and atomic mobility were developed. A phenomenological model was developed to describe the lattice parameter in solid states as a function of temperature and composition, and successfully applied to Ni-Al binary system by evaluating the model parameters using experimental data. An integrated computational approach was also proposed for evaluating the lattice misfit between the matrix and precipitates by combining first-principles calculations, existing experimental data and phenomenological modeling when the experimental data is limited. The lattice parameters and the local lattice distortions around solute atoms in gamma-Ni solutions were studied using first-principles calculations. The solute atoms considered include Al, Co, Cr, Hf, Mo, Nb, Re, Ru, Ta, Ti and W. The effects of the atomic size and the electronic and magnetic interactions on lattice distortion have been discussed. Atomic mobility in disordered gamma and ordered gamma' phases was modeled for the Ni-Al-Mo ternary system, and a kinetic database was developed. The diffusion of Al in gamma' was simulated, and the formation energies of vacancy in different sublattices were calculated by first-principles approach, both of which indicate the anti-site diffusion mechanism being dominant for diffusion of Al. The

Parents' explanatory models and hopes for outcomes of occupational therapy using a sensory integration approach.

Science.gov (United States)

Cohn, Ellen S; Kramer, Jessica; Schub, Jamie A; May-Benson, Teresa

2014-01-01

PURPOSE. To describe parents' concerns and hopes for their children who would be receiving occupational therapy using a sensory integration approach. METHOD. Content analysis of 275 parental responses to three open-ended questions on developmental-sensory history intake forms. FINDINGS. Parents' descriptions of why they sought for their children were categorized into four overarching concerns about their children's challenges: self-regulation, interacting with peers, participating in skilled motor activities, and self-confidence. Parents often linked these concerns together, revealing explanatory models of how they make sense of potential relationships among their children's challenges and how these challenges affect occupational performance. Parents hoped occupational therapy would help their children develop self-understanding and frustration tolerance to self-regulate their behavior in socially acceptable ways. IMPLICATIONS. Assessment and intervention should explicitly focus on links among self-regulation, social participation, skills, and perceived competence to address parents' expectations. Copyright © 2014 by the American Occupational Therapy Association, Inc.

The Integration Movement in the Caribbean at Crossroads: Towards a New Approach of Integration

OpenAIRE

Uziel Nogueira

1997-01-01

The Institute for the Integration of Latin America and the Caribbean (INTAL) has inaugurated a Working Papers Series with the publication of a study by Uziel Nogueira, the Institute's Economist. Entitled "The Integration Movement in the Caribbean at the Crossroads: Towards a New Approach to Integration", the study opens with an overview of the movement towards integration among the English-speaking countries of the Caribbean. It continues with an analysis of the integration process during thi...

Recent developments in the path integral approach to anomalies

International Nuclear Information System (INIS)

Fujikawa, Kazuo.

1986-08-01

After a brief summary of the path integral approach to anomalous identities, some of the recent developments in this approach are discussed. The topics discussed include (i) Construction of the effective action by means of the covariant current, (ii) Gauss law constraint in anomalous gauge theories, (iii) Path integral approach to anomalies in superconformal transformations, (iv) Conformal and ghost number anomalies in string theory in analogy with the instanton calculation, (v) Covariant local Lorentz anomaly and its connection with the mathematical construction of the consistent anomaly. (author)

An integrated approach coupling physically based models and probabilistic method to assess quantitatively landslide susceptibility at different scale: application to different geomorphological environments

Science.gov (United States)

Vandromme, Rosalie; Thiéry, Yannick; Sedan, Olivier; Bernardie, Séverine

2016-04-01

Landslide hazard assessment is the estimation of a target area where landslides of a particular type, volume, runout and intensity may occur within a given period. The first step to analyze landslide hazard consists in assessing the spatial and temporal failure probability (when the information is available, i.e. susceptibility assessment). Two types of approach are generally recommended to achieve this goal: (i) qualitative approach (i.e. inventory based methods and knowledge data driven methods) and (ii) quantitative approach (i.e. data-driven methods or deterministic physically based methods). Among quantitative approaches, deterministic physically based methods (PBM) are generally used at local and/or site-specific scales (1:5,000-1:25,000 and >1:5,000, respectively). The main advantage of these methods is the calculation of probability of failure (safety factor) following some specific environmental conditions. For some models it is possible to integrate the land-uses and climatic change. At the opposite, major drawbacks are the large amounts of reliable and detailed data (especially materials type, their thickness and the geotechnical parameters heterogeneity over a large area) and the fact that only shallow landslides are taking into account. This is why they are often used at site-specific scales (> 1:5,000). Thus, to take into account (i) materials' heterogeneity , (ii) spatial variation of physical parameters, (iii) different landslide types, the French Geological Survey (i.e. BRGM) has developed a physically based model (PBM) implemented in a GIS environment. This PBM couples a global hydrological model (GARDENIA®) including a transient unsaturated/saturated hydrological component with a physically based model computing the stability of slopes (ALICE®, Assessment of Landslides Induced by Climatic Events) based on the Morgenstern-Price method for any slip surface. The variability of mechanical parameters is handled by Monte Carlo approach. The

Integrating satellite imagery with simulation modeling to improve burn severity mapping

Science.gov (United States)

Eva C. Karau; Pamela G. Sikkink; Robert E. Keane; Gregory K. Dillon

2014-01-01

Both satellite imagery and spatial fire effects models are valuable tools for generating burn severity maps that are useful to fire scientists and resource managers. The purpose of this study was to test a new mapping approach that integrates imagery and modeling to create more accurate burn severity maps. We developed and assessed a statistical model that combines the...

Modelling of Operative Report Documents for Data Integration into an openEHR-Based Enterprise Data Warehouse.

Science.gov (United States)

Haarbrandt, Birger; Wilschko, Andreas; Marschollek, Michael

2016-01-01

In order to integrate operative report documents from two operating room management systems into a data warehouse, we investigated the application of the two-level modelling approach of openEHR to create a shared data model. Based on the systems' analyses, a template consisting of 13 archetypes has been developed. Of these 13 archetypes, 3 have been obtained from the international archetype repository of the openEHR foundation. The remaining 10 archetypes have been newly created. The template was evaluated by an application system expert and through conducting a first test mapping of real-world data from one of the systems. The evaluation showed that by using the two-level modelling approach of openEHR, we succeeded to represent an integrated and shared information model for operative report documents. More research is needed to learn about the limitations of this approach in other data integration scenarios.

Integrated modeling approach for optimal management of water, energy and food security nexus

Science.gov (United States)

Zhang, Xiaodong; Vesselinov, Velimir V.

2017-03-01

Water, energy and food (WEF) are inextricably interrelated. Effective planning and management of limited WEF resources to meet current and future socioeconomic demands for sustainable development is challenging. WEF production/delivery may also produce environmental impacts; as a result, green-house-gas emission control will impact WEF nexus management as well. Nexus management for WEF security necessitates integrated tools for predictive analysis that are capable of identifying the tradeoffs among various sectors, generating cost-effective planning and management strategies and policies. To address these needs, we have developed an integrated model analysis framework and tool called WEFO. WEFO provides a multi-period socioeconomic model for predicting how to satisfy WEF demands based on model inputs representing productions costs, socioeconomic demands, and environmental controls. WEFO is applied to quantitatively analyze the interrelationships and trade-offs among system components including energy supply, electricity generation, water supply-demand, food production as well as mitigation of environmental impacts. WEFO is demonstrated to solve a hypothetical nexus management problem consistent with real-world management scenarios. Model parameters are analyzed using global sensitivity analysis and their effects on total system cost are quantified. The obtained results demonstrate how these types of analyses can be helpful for decision-makers and stakeholders to make cost-effective decisions for optimal WEF management.

Using Integrated Environmental Modeling to Automate a Process-Based Quantitative Microbial Risk Assessment (presentation)

Science.gov (United States)

Integrated Environmental Modeling (IEM) organizes multidisciplinary knowledge that explains and predicts environmental-system response to stressors. A Quantitative Microbial Risk Assessment (QMRA) is an approach integrating a range of disparate data (fate/transport, exposure, and...

Developing Integrated Care: Towards a development model for integrated care

NARCIS (Netherlands)

M.M.N. Minkman (Mirella)

2012-01-01

textabstractThe thesis adresses the phenomenon of integrated care. The implementation of integrated care for patients with a stroke or dementia is studied. Because a generic quality management model for integrated care is lacking, the study works towards building a development model for integrated

Integrating Adult Learning and Technologies for Effective Education: Strategic Approaches

Science.gov (United States)

Wang, Victor C. X.

2010-01-01

As adult learners and educators pioneer the use of technology in the new century, attention has been focused on developing strategic approaches to effectively integrate adult learning and technology in different learning environments. "Integrating Adult Learning and Technologies for Effective Education: Strategic Approaches" provides innovative…

Does integration matter? A holistic model for building community resilience in Pakistan.

Science.gov (United States)

Kanta Kafle, Shesh

2017-01-01

This paper analyses an integrated communitybased risk reduction model adopted by the Pakistan Red Crescent. The paper analyses the model's constructs and definitions, and provides a conceptual framework and a set of practical recommendations for building community resilience. The study uses the process of outcome-based resilience index to assess the effectiveness of the approach. The results indicate that the integrated programming approach is an effective way to build community resilience as it offers a number of tangible and longlasting benefits, including effective and efficient service delivery, local ownership, sustainability of results, and improved local resilience with respect to the shock and stress associated with disaster. The paper also outlines a set of recommendations for the effective and efficient use of the model for building community resilience in Pakistan.

PRISMA: Program of Research to Integrate the Services for the Maintenance of Autonomy. A system-level integration model in Quebec

Directory of Open Access Journals (Sweden)

Margaret MacAdam

2015-09-01

Full Text Available The Program of Research to Integrate the Services for the Maintenance of Autonomy (PRISMA began in Quebec in 1999. Evaluation results indicated that the PRISMA Project improved the system of care for the frail elderly at no additional cost. In 2001, the Quebec Ministry of Health and Social Services made implementing the six features of the PRISMA approach a province-wide goal in the programme now known as RSIPA (French acronym. Extensive Province-wide progress has been made since then, but ongoing challenges include reducing unmet need for case management and home care services, creating incentives for increased physician participation in care planning and improving the computerized client chart, among others. PRISMA is the only evaluated international model of a coordination approach to integration and one of the few, if not the only, integration model to have been adopted at the system level by policy-makers.

An integrated approach to determine phenomenological equations in metallic systems

Science.gov (United States)

Ghamarian, Iman

It is highly desirable to be able to make predictions of properties in metallic materials based upon the composition of the material and the microstructure. Unfortunately, the complexity of real, multi-component, multi-phase engineering alloys makes the provision of constituent-based (i.e., composition or microstructure) phenomenological equations extremely difficult. Due to these difficulties, qualitative predictions are frequently used to study the influence of microstructure or composition on the properties. Neural networks were used as a tool to get a quantitative model from a database. However, the developed model is not a phenomenological model. In this study, a new method based upon the integration of three separate modeling approaches, specifically artificial neural networks, genetic algorithms, and monte carlo was proposed. These three methods, when coupled in the manner described in this study, allows for the extraction of phenomenological equations with a concurrent analysis of uncertainty. This approach has been applied to a multi-component, multi-phase microstructure exhibiting phases with varying spatial and morphological distributions. Specifically, this approach has been applied to derive a phenomenological equation for the prediction of yield strength in alpha+beta processed Ti-6-4. The equation is consistent with not only the current dataset but also, where available, the limited information regarding certain parameters such as intrinsic yield strength of pure hexagonal close-packed alpha titanium.

Comparison of finite element J-integral evaluations for the blunt crack model and the sharp crack model

International Nuclear Information System (INIS)

Pan, Y.C.; Kennedy, J.M.

1983-01-01

In assessing the safety of a liquid metal fast breeder reactor (LMFBR), a major concern is that of hot sodium coming into contact with either unprotected concrete or steel-lined concrete equipment cells and containment structures. An aspect of this is the potential of concrete cracking which would significantly influence the safety assessment. Concrete cracking in finite element analysis can be modeled as a blunt crack in which the crack is assumed to be uniformly distributed throughout the area of the element. A blunt crack model based on the energy release rate and the effective strength concepts which was insensitive to the element size was presented by Bazant and Cedolin. Some difficulties were encountered in incorporating their approach into a general purpose finite element code. An approach based on the J-integral to circumvent some of the difficulties was proposed by Pan, Marchertas, and Kennedy. Alternatively, cracking can also be modeled as a sharp crack where the crack surface is treated as the boundary of the finite element mesh. The sharp crack model is adopted by most researchers and its J-integral has been well established. It is desirable to establish the correlation between the J-integrals, or the energy release rates, for the blunt crack model and the sharp crack model so that data obtained from one model can be used on the other

SWIM (Soil and Water Integrated Model)

Energy Technology Data Exchange (ETDEWEB)

Krysanova, V; Wechsung, F; Arnold, J; Srinivasan, R; Williams, J

2000-12-01

The model SWIM (Soil and Water Integrated Model) was developed in order to provide a comprehensive GIS-based tool for hydrological and water quality modelling in mesoscale and large river basins (from 100 to 10,000 km{sup 2}), which can be parameterised using regionally available information. The model was developed for the use mainly in Europe and temperate zone, though its application in other regions is possible as well. SWIM is based on two previously developed tools - SWAT and MATSALU (see more explanations in section 1.1). The model integrates hydrology, vegetation, erosion, and nutrient dynamics at the watershed scale. SWIM has a three-level disaggregation scheme 'basin - sub-basins - hydrotopes' and is coupled to the Geographic Information System GRASS (GRASS, 1993). A robust approach is suggested for the nitrogen and phosphorus modelling in mesoscale watersheds. SWIM runs under the UNIX environment. Model test and validation were performed sequentially for hydrology, crop growth, nitrogen and erosion in a number of mesoscale watersheds in the German part of the Elbe drainage basin. A comprehensive scheme of spatial disaggregation into sub-basins and hydrotopes combined with reasonable restriction on a sub-basin area allows performing the assessment of water resources and water quality with SWIM in mesoscale river basins. The modest data requirements represent an important advantage of the model. Direct connection to land use and climate data provides a possibility to use the model for analysis of climate change and land use change impacts on hydrology, agricultural production, and water quality. (orig.)

DESIGN MODELING OF A UNIVERSITY’S COMPREHENSIVE-INTEGRATED SECURITY SYSTEM

Directory of Open Access Journals (Sweden)

Marina V. Dulyasova

2017-03-01

Full Text Available Introduction: the safety of higher education institutions is considered to be of great importance nowadays. Security challenges need to be addressed through a comprehensive and integrative approach. This approach provides neutralisation of various threats systemically, risk prevention, minimisation of the tangible and moral harm. The project concept of “safe university” is proposed and substantiated for the above-mentioned purposes. Materials and Methods: the authors used a special literature survey on the issue, which is divided into three main groups of publications, where the complex security of educational institutions is considered in the context of the general theory of security, in the educational-methodical plan and within the framework of sociological, psychological and pedagogical approaches. The legislative and regulatory sources also indicated, legislative and regulatory legal acts reviews, “Safe City” concept, National standard “Information security technologies: complex and integrated ones. Standard requirements to architecture and technologies of intellectual systems of monitoring for safety of the companies and the territories” (State standard specification P 56875-2016, documents of higher education institutions, media reports. The analysis and generalisation of information was coupled with project modeling of the new comprehensive system of higher education institution security. Results: the authors introduce the concept, architecture and model of the comprehensive integrated higher education institution security, monitoring based on measures and indicators pertaining to implementation of standard requirements and level of satisfaction with safety, evaluation of the taken measures in terms of efficiency. Discussion and Conclusions: the main contours of the model for comprehensive integrated security system in a higher education institution and algorithm of interaction between the subjects are determined. These

Smart Integrated Renewable Energy Systems (SIRES: A Novel Approach for Sustainable Development

Directory of Open Access Journals (Sweden)

Zeel Maheshwari

2017-08-01

Full Text Available Technical and economic aspects of the viability of SIRES (Smart Integrated Renewable Energy Systems for sustainable development of remote and rural areas of the world are discussed. The hallmark of the proposed SIRES is the smart utilization of several renewable resources in an integrated fashion and matching of resources and needs a priori with the ultimate goal of “energization”, not just “electrification”. Historical background leading to this approach is succinctly presented along with a comprehensive schematic diagram. Modeling of various components and their collective use in optimizing SIRES with the aid of genetic algorithm are presented using a typical hypothetical example. SIRES is also compared with various approaches for rural development based on Annualized Cost of System (ACS and installation costs. Implementation of SIRES will lead to overall sustainable development of rural communities.

Evaluation of complex integrated care programmes: the approach in North West London

Science.gov (United States)

Greaves, Felix; Pappas, Yannis; Bardsley, Martin; Harris, Matthew; Curry, Natasha; Holder, Holly; Blunt, Ian; Soljak, Michael; Gunn, Laura; Majeed, Azeem; Car, Josip

2013-01-01

Background Several local attempts to introduce integrated care in the English National Health Service have been tried, with limited success. The Northwest London Integrated Care Pilot attempts to improve the quality of care of the elderly and people with diabetes by providing a novel integration process across primary, secondary and social care organisations. It involves predictive risk modelling, care planning, multidisciplinary management of complex cases and an information technology tool to support information sharing. This paper sets out the evaluation approach adopted to measure its effect. Study design We present a mixed methods evaluation methodology. It includes a quantitative approach measuring changes in service utilization, costs, clinical outcomes and quality of care using routine primary and secondary data sources. It also contains a qualitative component, involving observations, interviews and focus groups with patients and professionals, to understand participant experiences and to understand the pilot within the national policy context. Theory and discussion This study considers the complexity of evaluating a large, multi-organisational intervention in a changing healthcare economy. We locate the evaluation within the theory of evaluation of complex interventions. We present the specific challenges faced by evaluating an intervention of this sort, and the responses made to mitigate against them. Conclusions We hope this broad, dynamic and responsive evaluation will allow us to clarify the contribution of the pilot, and provide a potential model for evaluation of other similar interventions. Because of the priority given to the integrated agenda by governments internationally, the need to develop and improve strong evaluation methodologies remains strikingly important. PMID:23687478

Evaluation of complex integrated care programmes: the approach in North West London

Directory of Open Access Journals (Sweden)

Felix Greaves

2013-03-01

Full Text Available Background: Several local attempts to introduce integrated care in the English National Health Service have been tried, with limited success. The Northwest London Integrated Care Pilot attempts to improve the quality of care of the elderly and people with diabetes by providing a novel integration process across primary, secondary and social care organisations. It involves predictive risk modelling, care planning, multidisciplinary management of complex cases and an information technology tool to support information sharing. This paper sets out the evaluation approach adopted to measure its effect. Study design: We present a mixed methods evaluation methodology. It includes a quantitative approach measuring changes in service utilization, costs, clinical outcomes and quality of care using routine primary and secondary data sources. It also contains a qualitative component, involving observations, interviews and focus groups with patients and professionals, to understand participant experiences and to understand the pilot within the national policy context. Theory and discussion: This study considers the complexity of evaluating a large, multi-organisational intervention in a changing healthcare economy. We locate the evaluation within the theory of evaluation of complex interventions. We present the specific challenges faced by evaluating an intervention of this sort, and the responses made to mitigate against them. Conclusions: We hope this broad, dynamic and responsive evaluation will allow us to clarify the contribution of the pilot, and provide a potential model for evaluation of other similar interventions. Because of the priority given to the integrated agenda by governments internationally, the need to develop and improve strong evaluation methodologies remains strikingly important

Evaluation of complex integrated care programmes: the approach in North West London

Directory of Open Access Journals (Sweden)

Felix Greaves

2013-03-01

Full Text Available Background: Several local attempts to introduce integrated care in the English National Health Service have been tried, with limited success. The Northwest London Integrated Care Pilot attempts to improve the quality of care of the elderly and people with diabetes by providing a novel integration process across primary, secondary and social care organisations. It involves predictive risk modelling, care planning, multidisciplinary management of complex cases and an information technology tool to support information sharing. This paper sets out the evaluation approach adopted to measure its effect.Study design: We present a mixed methods evaluation methodology. It includes a quantitative approach measuring changes in service utilization, costs, clinical outcomes and quality of care using routine primary and secondary data sources. It also contains a qualitative component, involving observations, interviews and focus groups with patients and professionals, to understand participant experiences and to understand the pilot within the national policy context.Theory and discussion: This study considers the complexity of evaluating a large, multi-organisational intervention in a changing healthcare economy. We locate the evaluation within the theory of evaluation of complex interventions. We present the specific challenges faced by evaluating an intervention of this sort, and the responses made to mitigate against them.Conclusions: We hope this broad, dynamic and responsive evaluation will allow us to clarify the contribution of the pilot, and provide a potential model for evaluation of other similar interventions. Because of the priority given to the integrated agenda by governments internationally, the need to develop and improve strong evaluation methodologies remains strikingly important

A Bayesian network approach to knowledge integration and representation of farm irrigation: 1. Model development

Science.gov (United States)

Wang, Q. J.; Robertson, D. E.; Haines, C. L.

2009-02-01

Irrigation is important to many agricultural businesses but also has implications for catchment health. A considerable body of knowledge exists on how irrigation management affects farm business and catchment health. However, this knowledge is fragmentary; is available in many forms such as qualitative and quantitative; is dispersed in scientific literature, technical reports, and the minds of individuals; and is of varying degrees of certainty. Bayesian networks allow the integration of dispersed knowledge into quantitative systems models. This study describes the development, validation, and application of a Bayesian network model of farm irrigation in the Shepparton Irrigation Region of northern Victoria, Australia. In this first paper we describe the process used to integrate a range of sources of knowledge to develop a model of farm irrigation. We describe the principal model components and summarize the reaction to the model and its development process by local stakeholders. Subsequent papers in this series describe model validation and the application of the model to assess the regional impact of historical and future management intervention.

Introducing a model of cardiovascular prevention in Nairobi's slums by integrating a public health and private-sector approach: the SCALE-UP study

Directory of Open Access Journals (Sweden)

Steven van de Vijver

2013-10-01

Full Text Available Introduction: Cardiovascular disease (CVD is a leading cause of death in sub-Saharan Africa (SSA, with annual deaths expected to increase to 2 million by 2030. Currently, most national health systems in SSA are not adequately prepared for this epidemic. This is especially so in slum settlements where access to formal healthcare and resources is limited. Objective: To develop and introduce a model of cardiovascular prevention in the slums of Nairobi by integrating public health and private sector approaches. Study design: Two non-profit organizations that conduct public health research, Amsterdam Institute for Global Health and Development (AIGHD and African Population and Health Research Center (APHRC, collaborated with private-sector Boston Consulting Group (BCG to develop a service delivery package for CVD prevention in slum settings. A theoretic model was designed based on the integration of public and private sector approaches with the focus on costs and feasibility. Results: The final model includes components that aim to improve community awareness, a home-based screening service, patient and provider incentives to seek and deliver treatment specifically for hypertension, and adherence support. The expected outcomes projected by this model could prove potentially cost effective and affordable (1 USD/person/year. The model is currently being implemented in a Nairobi slum and is closely followed by key stakeholders in Kenya including the Ministry of Health, the World Health Organization (WHO, and leading non-governmental organizations (NGOs. Conclusion: Through the collaboration of public health and private sectors, a theoretically cost-effective model was developed for the prevention of CVD and is currently being implemented in the slums of Nairobi. If results are in line with the theoretical projections and first impressions on the ground, scale-up of the service delivery package could be planned in other poor urban areas in Kenya by

Introducing a model of cardiovascular prevention in Nairobi's slums by integrating a public health and private-sector approach: the SCALE-UP study.

Science.gov (United States)

van de Vijver, Steven; Oti, Samuel; Tervaert, Thijs Cohen; Hankins, Catherine; Kyobutungi, Catherine; Gomez, Gabriela B; Brewster, Lizzy; Agyemang, Charles; Lange, Joep

2013-10-21

Cardiovascular disease (CVD) is a leading cause of death in sub-Saharan Africa (SSA), with annual deaths expected to increase to 2 million by 2030. Currently, most national health systems in SSA are not adequately prepared for this epidemic. This is especially so in slum settlements where access to formal healthcare and resources is limited. To develop and introduce a model of cardiovascular prevention in the slums of Nairobi by integrating public health and private sector approaches. Two non-profit organizations that conduct public health research, Amsterdam Institute for Global Health and Development (AIGHD) and African Population and Health Research Center (APHRC), collaborated with private-sector Boston Consulting Group (BCG) to develop a service delivery package for CVD prevention in slum settings. A theoretic model was designed based on the integration of public and private sector approaches with the focus on costs and feasibility. The final model includes components that aim to improve community awareness, a home-based screening service, patient and provider incentives to seek and deliver treatment specifically for hypertension, and adherence support. The expected outcomes projected by this model could prove potentially cost effective and affordable (1 USD/person/year). The model is currently being implemented in a Nairobi slum and is closely followed by key stakeholders in Kenya including the Ministry of Health, the World Health Organization (WHO), and leading non-governmental organizations (NGOs). Through the collaboration of public health and private sectors, a theoretically cost-effective model was developed for the prevention of CVD and is currently being implemented in the slums of Nairobi. If results are in line with the theoretical projections and first impressions on the ground, scale-up of the service delivery package could be planned in other poor urban areas in Kenya by relevant policymakers and NGOs.

Substantiating the Conceptual Model of Branding of the Integrated Business Structures

Directory of Open Access Journals (Sweden)

Nifatova Olena M.

2017-11-01

Full Text Available The article is aimed at researching the theoretical foundations of the concept of branding and forming a conceptual model of branding of the integrated business structures. The concept of branding of IBS is systematized and synthesized by three directions: overview of theories of management of integrated business structures, based on the principle of economic integration; overview of the brand management models based on the principle of brand-oriented management; overview of management approaches, the essence of which is synthesized in the aspect of application to the management of brands of the integrated business structures. Special attention is paid to the factors influencing the efficiency of the process of integration of business structures. Further development of modelling the process of integration branding in the IBS system is of great importance, as the brands of two unifying companies usually have their own identities, unique features within the terms of formation of the brand’s style and philosophy. In such a fundamental issue it is necessary to define the strategy of brand integration, i.e. whether it will be a single brand, a joint brand, a flexible brand or a completely new one.

Curriculum Integration Using Enterprise Resource Planning: An Integrative Case Approach

Science.gov (United States)

Cannon, David M.; Klein, Helen A; Koste, Lori L.; Magal, Simha R.

2004-01-01

Efforts to achieve greater curriculum integration in schools of business have included team teaching, student group projects, multidisciplinary cases, and, more recently, the use of enterprise resource planning (ERP) systems. Although these approaches are beneficial, they tend to be implemented on an ad hoc basis rather than through curriculum…

Sustainable Design Re-Examined: Integrated Approach to Knowledge Creation for Sustainable Interior Design

Science.gov (United States)

Lee, Young S.

2014-01-01

The article focuses on a systematic approach to the instructional framework to incorporate three aspects of sustainable design. It also aims to provide an instruction model for sustainable design stressing a collective effort to advance knowledge creation as a community. It develops a framework conjoining the concept of integrated process in…

Drugs of Abuse and Addiction: An integrated approach to teaching.

Science.gov (United States)

Miller, Lindsey N; Mercer, Susan L

2017-05-01

To describe the design, implementation, and student perceptions of a Drugs of Abuse and Addiction elective course utilizing an integrated teaching model. Third-year pharmacy students enrolled in the two credit hour elective. Teaching methodology included didactic lecture, journal club, simulated addiction assignment with reflection, debates, external speakers, site visit to a residential drug court program and research paper with presentation. A course objective survey was administered upon course completion. All students strongly agreed that having science- and clinical-based faculty members develop and deliver course content was beneficial. Additionally, all students agree to strongly agree that their research project helped them integrate and comprehend the science and practice surrounding drugs of abuse and addiction. Students enjoyed an integrated teaching approach and multiple teaching methodologies leading to increased engagement and enhancement of student learning. Course enrollment was beneficial for personalized learning, but limited student perspective. Copyright © 2017 Elsevier Inc. All rights reserved.

The Impact of Technology Integration through a Transformative Approach

Science.gov (United States)

Cubillos, Jo Ann

2013-01-01

The integration of technology into classroom instruction in K-12 schools remains problematic. The problems associated with this integration are troubling, as technology integration may change a teacher's pedagogy toward more innovative approaches that increase student achievement. The purpose of this study was to document teachers' experiences as…

Integrated assessment models of climate change. An incomplete overview

International Nuclear Information System (INIS)

Dowlatabadi, H.

1995-01-01

Integrated assessment is a trendy phrase that has recently entered the vocabulary of folks in Washington, DC and elsewhere. The novelty of the term in policy analysis and policy making circles belies the longevity of this approach in the sciences and past attempts at their application to policy issues. This paper is an attempt at providing an overview of integrated assessment with a special focus on policy motivated integrated assessments of climate change. The first section provides an introduction to integrated assessments in general, followed by a discussion of the bounds to the climate change issue. The next section is devoted to a taxonomy of the policy motivated models. Then the integrated assessment effort at Carnegie Mellon is described briefly. A perspective on the challenges ahead in successful representation of natural and social dynamics in integrated assessments of global climate change is presented in the final section. (Author)

Integrated modelling of corrosion-induced deterioration in rein-forced concrete structures

DEFF Research Database (Denmark)

Michel, Alexander; Geiker, M.R.; Stang, Henrik

2013-01-01

at the reinforcement surface, a FEM based me-chanical model was used to simulate corrosion-induced concrete damage. Both FEM models were fully coupled, i.e. information, such as corrosion current density, dam-age state of concrete cover, etc., were constantly exchanged between the models. To demonstrate the potential......An integrated finite element based modelling approach is presented, which allows for fully coupled simulation of reinforcement corrosion and corrosion-induced concrete damage. While a finite element method (FEM) based corrosion model was used to describe electrochemical processes...... use of the modelling approach, a numerical example is presented which illustrates full coupling of formation of corrosion cells, propagation of corrosion, and subsequent development of corrosion-induced concrete damage....

Trust-region based return mapping algorithm for implicit integration of elastic-plastic constitutive models

Energy Technology Data Exchange (ETDEWEB)

Lester, Brian T. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Scherzinger, William M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2017-01-19

A new method for the solution of the non-linear equations forming the core of constitutive model integration is proposed. Specifically, the trust-region method that has been developed in the numerical optimization community is successfully modified for use in implicit integration of elastic-plastic models. Although attention here is restricted to these rate-independent formulations, the proposed approach holds substantial promise for adoption with models incorporating complex physics, multiple inelastic mechanisms, and/or multiphysics. As a first step, the non-quadratic Hosford yield surface is used as a representative case to investigate computationally challenging constitutive models. The theory and implementation are presented, discussed, and compared to other common integration schemes. Multiple boundary value problems are studied and used to verify the proposed algorithm and demonstrate the capabilities of this approach over more common methodologies. Robustness and speed are then investigated and compared to existing algorithms. As a result through these efforts, it is shown that the utilization of a trust-region approach leads to superior performance versus a traditional closest-point projection Newton-Raphson method and comparable speed and robustness to a line search augmented scheme.

Trust-region based return mapping algorithm for implicit integration of elastic-plastic constitutive models

Energy Technology Data Exchange (ETDEWEB)

Lester, Brian [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Scherzinger, William [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2017-01-19

Here, a new method for the solution of the non-linear equations forming the core of constitutive model integration is proposed. Specifically, the trust-region method that has been developed in the numerical optimization community is successfully modified for use in implicit integration of elastic-plastic models. Although attention here is restricted to these rate-independent formulations, the proposed approach holds substantial promise for adoption with models incorporating complex physics, multiple inelastic mechanisms, and/or multiphysics. As a first step, the non-quadratic Hosford yield surface is used as a representative case to investigate computationally challenging constitutive models. The theory and implementation are presented, discussed, and compared to other common integration schemes. Multiple boundary value problems are studied and used to verify the proposed algorithm and demonstrate the capabilities of this approach over more common methodologies. Robustness and speed are then investigated and compared to existing algorithms. Through these efforts, it is shown that the utilization of a trust-region approach leads to superior performance versus a traditional closest-point projection Newton-Raphson method and comparable speed and robustness to a line search augmented scheme.

Integrated systems approach to meet the insider threat

International Nuclear Information System (INIS)

Barnes, L.D.

1985-01-01

This paper describes an approach to mitigating the insider threat by integrating and supplementing existing data systems and procedures without placing an undue burden on plant management and operating personnel. Nuclear facilities have plans to deal with any forseeable chain of events, and long-term records of activities are maintained to verify that the requirements are met. The integrated systems approach proposed in this paper does not change established facility practices; rather, the approach attempts to utilize the information generated by the system. This will provide real-time interaction between the documented work permits, the operating procedure system, and the security system so that controlled access authorizations are based on a need to enter and access is limited to specific times and places

Optimizing conjunctive use of surface water and groundwater for irrigation in arid and semi-arid areas: an integrated modeling approach

Science.gov (United States)

Wu, Xin; Wu, Bin; Zheng, Yi; Tian, Yong; Liu, Jie; Zheng, Chunmiao

2015-04-01

In arid and semi-arid agricultural areas, groundwater (GW) is an important water source of irrigation, in addition to surface water (SW). Groundwater pumping would significantly alter the regional hydrological regime, and therefore complicate the water resources management process. This study explored how to optimize the conjunctive use of SW and GW for agricultural irrigation at a basin scale, based on integrated SW-GW modeling and global optimization methods. The improved GSFLOW model was applied to the Heihe River Basin, the second largest inland river basin in China. Two surrogate-based global optimization approaches were implemented and compared, including the well-established DYCORS algorithm and a new approach we proposed named as SOIM, which takes radial basis function (RBF) and support vector machine (SVM) as the surrogate model, respectively. Both temporal and spatial optimizations were performed, aiming at maximizing saturated storage change of midstream part conditioned on non-reduction of irrigation demand, constrained by certain annual discharge for the downstream part. Several scenarios for different irrigation demand and discharge flow are designed. The main study results include the following. First, the integrated modeling not only provides sufficient flexibility to formulation of optimization problems, but also makes the optimization results more physically interpretable and managerially meaningful. Second, the surrogate-based optimization approach was proved to be effective and efficient for the complex, time-consuming modeling, and is quite promising for decision-making. Third, the strong and complicated SW-GW interactions in the study area allow significant water resources conservation, even if neither irrigation demand nor discharge for the downstream part decreases. Under the optimal strategy, considerable part of surface water division is replaced by 'Stream leakage-Pump' process to avoid non-beneficial evaporation via canals. Spatially

Integrative Data Analysis of Multi-Platform Cancer Data with a Multimodal Deep Learning Approach.

Science.gov (United States)

Liang, Muxuan; Li, Zhizhong; Chen, Ting; Zeng, Jianyang

2015-01-01

Identification of cancer subtypes plays an important role in revealing useful insights into disease pathogenesis and advancing personalized therapy. The recent development of high-throughput sequencing technologies has enabled the rapid collection of multi-platform genomic data (e.g., gene expression, miRNA expression, and DNA methylation) for the same set of tumor samples. Although numerous integrative clustering approaches have been developed to analyze cancer data, few of them are particularly designed to exploit both deep intrinsic statistical properties of each input modality and complex cross-modality correlations among multi-platform input data. In this paper, we propose a new machine learning model, called multimodal deep belief network (DBN), to cluster cancer patients from multi-platform observation data. In our integrative clustering framework, relationships among inherent features of each single modality are first encoded into multiple layers of hidden variables, and then a joint latent model is employed to fuse common features derived from multiple input modalities. A practical learning algorithm, called contrastive divergence (CD), is applied to infer the parameters of our multimodal DBN model in an unsupervised manner. Tests on two available cancer datasets show that our integrative data analysis approach can effectively extract a unified representation of latent features to capture both intra- and cross-modality correlations, and identify meaningful disease subtypes from multi-platform cancer data. In addition, our approach can identify key genes and miRNAs that may play distinct roles in the pathogenesis of different cancer subtypes. Among those key miRNAs, we found that the expression level of miR-29a is highly correlated with survival time in ovarian cancer patients. These results indicate that our multimodal DBN based data analysis approach may have practical applications in cancer pathogenesis studies and provide useful guidelines for

Combining the Generic Entity-Attribute-Value Model and Terminological Models into a Common Ontology to Enable Data Integration and Decision Support.

Science.gov (United States)

Bouaud, Jacques; Guézennec, Gilles; Séroussi, Brigitte

2018-01-01

The integration of clinical information models and termino-ontological models into a unique ontological framework is highly desirable for it facilitates data integration and management using the same formal mechanisms for both data concepts and information model components. This is particularly true for knowledge-based decision support tools that aim to take advantage of all facets of semantic web technologies in merging ontological reasoning, concept classification, and rule-based inferences. We present an ontology template that combines generic data model components with (parts of) existing termino-ontological resources. The approach is developed for the guideline-based decision support module on breast cancer management within the DESIREE European project. The approach is based on the entity attribute value model and could be extended to other domains.

Availability objectives integration to design. The CIDEM approach

International Nuclear Information System (INIS)

Degrave, C.; Martin-Onraet, M.

1994-01-01

Considering the operation experience feedback from its nuclear park and from foreign parks, and considering new approaches and design tools such as concurrent engineering, total quality, etc., EDF (Electricite de France) has decided to start the CIDEM approach (integration of availability, operating experience feedback and maintenance into design), an analytical and systematical study process for new projects (REP2000 (or PWR2000)), in order to optimize as much as possible the design phase while integrating maintenance, availability and safety objectives, with the view of a minimized kWh cost. This process, already used in other industries, employs concepts such as RAM (Reliability Availability Maintainability), RCM (Reliability Centered Maintenance) and ILS (Integrated Logistic Support). The availability and maintenance scheduling studies for the REP2000 project are detailed. 10 fig., 6 tab

Impacts of aerosol mitigation on Chinese rice photosynthesis: An integrated modeling approach

Science.gov (United States)

Zhang, T.; Li, T.; Yue, X.; Yang, X.

2017-12-01

Aerosol pollution in China is significantly altering radiative transfer processes and is thereby potentially affecting rice photosynthesis. However, the response of rice photosynthesis to aerosol-induced radiative perturbations is still not well understood. Here, we employ an integrated process-based modeling approach to simulate changes in incoming radiation (RAD) and the diffuse radiation fraction (DF) with aerosol mitigation in China and their associated impacts on rice yields. Aerosol reduction has the positive effect of increasing RAD and the negative effect of decreasing DF on rice photosynthesis and yields. In rice production areas where the average RAD during the growing season is lower than 250 W m-2, aerosol reduction is beneficial for higher rice yields, whereas in areas with RAD>250 W m-2, aerosol mitigation causes yield declines due to the associated reduction in the DF, which decreases the light use efficiency. This response pattern and threshold are similar with observations, even through more data are needed in future investigation. As a net effect, rice yields were estimated to significantly increase by 0.8-2.6% with aerosol concentrations reductions from 20 to 100%, which is lower than the estimates obtained in earlier studies that only considered the effects of RAD. This finding suggests that both RAD and DF are important processes influencing rice yields and should be incorporated into future assessments of agricultural responses to variations in aerosol-induced radiation under climate change.

Open architecture design and approach for the Integrated Sensor Architecture (ISA)

Science.gov (United States)

Moulton, Christine L.; Krzywicki, Alan T.; Hepp, Jared J.; Harrell, John; Kogut, Michael

2015-05-01

Integrated Sensor Architecture (ISA) is designed in response to stovepiped integration approaches. The design, based on the principles of Service Oriented Architectures (SOA) and Open Architectures, addresses the problem of integration, and is not designed for specific sensors or systems. The use of SOA and Open Architecture approaches has led to a flexible, extensible architecture. Using these approaches, and supported with common data formats, open protocol specifications, and Department of Defense Architecture Framework (DoDAF) system architecture documents, an integration-focused architecture has been developed. ISA can help move the Department of Defense (DoD) from costly stovepipe solutions to a more cost-effective plug-and-play design to support interoperability.

A combined reaction class approach with integrated molecular orbital+molecular orbital (IMOMO) methodology: A practical tool for kinetic modeling

International Nuclear Information System (INIS)

Truong, Thanh N.; Maity, Dilip K.; Truong, Thanh-Thai T.

2000-01-01

We present a new practical computational methodology for predicting thermal rate constants of reactions involving large molecules or a large number of elementary reactions in the same class. This methodology combines the integrated molecular orbital+molecular orbital (IMOMO) approach with our recently proposed reaction class models for tunneling. With the new methodology, we show that it is possible to significantly reduce the computational cost by several orders of magnitude while compromising the accuracy in the predicted rate constants by less than 40% over a wide range of temperatures. Another important result is that the computational cost increases only slightly as the system size increases. (c) 2000 American Institute of Physics

A One-Health integrated approach to control fascioliasis in the Cajamarca valley of Peru

Directory of Open Access Journals (Sweden)

Laura Rinaldi

2012-09-01

Full Text Available Fasciola hepatica infection is reported from many Latin American countries, with very high prevalence rates in both humans and livestock in the Andean countries. Due to its environmental characteristics, particularly suitable for liver fluke infection, the Cajamarca valley of Peru has often been chosen as a model to study the epidemiology of liver fluke infection in the Andes. In this paper we describe the profile of a project aimed at a multidisciplinary and integrated approach for the control of fascioliasis in animals and humans in this valley. The One-Health integrated approach applied here is based on accurate and sensitive diagnostics, namely the FLOTAC, and the use of geospatial tools for epidemiological scrutiny.

CANDU plant life management - An integrated approach

International Nuclear Information System (INIS)

Hopkins, J.R.

1998-01-01

An integrated approach to plant life management has been developed for CANDU reactors. Strategies, methods, and procedures have been developed for assessment of critical systems structures and components and for implementing a reliability centred maintenance program. A Technology Watch program is being implemented to eliminate 'surprises'. Specific work has been identified for 1998. AECL is working on the integrated program with CANDU owners and seeks participation from other CANDU owners

Teaching Business Process Management with Simulation in Graduate Business Programs: An Integrative Approach

Science.gov (United States)

Saraswat, Satya Prakash; Anderson, Dennis M.; Chircu, Alina M.

2014-01-01

This paper describes the development and evaluation of a graduate level Business Process Management (BPM) course with process modeling and simulation as its integral component, being offered at an accredited business university in the Northeastern U.S. Our approach is similar to that found in other Information Systems (IS) education papers, and…

Crop modelling for integrated assessment of risk to food production from climate change

NARCIS (Netherlands)

Ewert, F.; Rötter, R.P.; Bindi, M.; Webber, Heidi; Trnka, M.; Kersebaum, K.C.; Olesen, J.E.; Ittersum, van M.K.; Janssen, S.J.C.; Rivington, M.; Semenov, M.A.; Wallach, D.; Porter, J.R.; Stewart, D.; Verhagen, J.; Gaiser, T.; Palosuo, T.; Tao, F.; Nendel, C.; Roggero, P.P.; Bartosová, L.; Asseng, S.

2015-01-01

The complexity of risks posed by climate change and possible adaptations for crop production has called for integrated assessment and modelling (IAM) approaches linking biophysical and economic models. This paper attempts to provide an overview of the present state of crop modelling to assess

ISTehnology – integrated Approach to IS Development and Benefits of its Using

Directory of Open Access Journals (Sweden)

Janis Iljins

2011-07-01

Full Text Available The system ISTechnology and benefits of its usage are analyzed in the paper. ISTechnology provides an integrated approach to business modeling and development of information systems. The system consists of a meta-model and applications. The meta-model enables defining of a platform independent business model of the organization. The applications provide the definition and interpretation of the business model. Interpretation of the business model provides functionality of the information system in the selected platform. The lessons learned confirm that the development and maintenance cost of information systems can be significantly reduced by use of the ISTechnology. The paper describes additional benefits of using ISTechnology like generation of documentation and easy system migration to another platform.

AIM: An Integrated Approach to Organizational Improvement

Directory of Open Access Journals (Sweden)

Ronald A. Styron, Jr.

2016-02-01

Full Text Available This concept paper is based on the new problem-solving model of Blended Leadership called Alloy Improvement Model (AIM. This model consists of an integration of change theory, leadership theory, and democratic principles and practices to form a comprehensive problem-solving strategy for organizational leaders. The utilization of AIM will assist leaders in moving from problems to solutions while engaging stakeholders in a comprehensive, efficient, inclusive, informative, integrated and transparent process.

Systems innovation model: an integrated interdisciplinary team approach pre- and post-bariatric surgery at a veterans affairs (VA) medical center.

Science.gov (United States)

Eisenberg, Dan; Lohnberg, Jessica A; Kubat, Eric P; Bates, Cheryl C; Greenberg, Lauren M; Frayne, Susan M

2017-04-01

Provision of bariatric surgery in the Veterans Health Administration must account for obese veterans' co-morbidity burden and the geographically dispersed location of patients relative to Veterans Affairs (VA) bariatric centers. To evaluate a collaborative, integrated, interdisciplinary bariatric team of surgeons, bariatricians, psychologists, dieticians, and physical therapists working in a hub-and-spokes care model, for pre- and post-bariatric surgery assessment and management. This is a description of an interdisciplinary clinic and bariatric program at a VA healthcare system and a report on program evaluation findings. Retrospective data of a prospective database was abstracted. For program evaluation, we abstracted charts to characterize patient data and conducted a patient survey. Since 2009, 181 veterans have undergone bariatric surgery. Referrals came from 7 western U.S. states. Mean preoperative body mass index was 46 kg/m 2 (maximum 71). Mean age was 53 years, with 33% aged>60 years; 79% were male. Medical co-morbidity included diabetes (70%), hypertension (85%), and lower back or extremity joint pain (84%). A psychiatric diagnosis was present in 58%. At 12 months, follow-up was 81% and percent excess body mass index loss was 50.5%. Among 54 sequential clinic patients completing anonymous surveys, overall satisfaction with the interdisciplinary team approach and improved quality of life were high (98% and 94%, respectively). The integrated, interdisciplinary team approach using a hub-and-spokes model is well suited to the VA bariatric surgery population, with its heavy burden of medical and mental health co-morbidity and its system of geographically dispersed patients receiving treatment at specialty centers. As the VA seeks to expand the use of bariatric surgery as an option for obese veterans, interdisciplinary models crafted to address case complexity, care coordination, and long-term outcomes should be part of policy planning efforts. Published by

Integrated assessment of policy interventions for promoting sustainable irrigation in semi-arid environments: a hydro-economic modeling approach.

Science.gov (United States)

Blanco-Gutiérrez, Irene; Varela-Ortega, Consuelo; Purkey, David R

2013-10-15

Sustaining irrigated agriculture to meet food production needs while maintaining aquatic ecosystems is at the heart of many policy debates in various parts of the world, especially in arid and semi-arid areas. Researchers and practitioners are increasingly calling for integrated approaches, and policy-makers are progressively supporting the inclusion of ecological and social aspects in water management programs. This paper contributes to this policy debate by providing an integrated economic-hydrologic modeling framework that captures the socio-economic and environmental effects of various policy initiatives and climate variability. This modeling integration includes a risk-based economic optimization model and a hydrologic water management simulation model that have been specified for the Middle Guadiana basin, a vulnerable drought-prone agro-ecological area with highly regulated river systems in southwest Spain. Namely, two key water policy interventions were investigated: the implementation of minimum environmental flows (supported by the European Water Framework Directive, EU WFD), and a reduction in the legal amount of water delivered for irrigation (planned measure included in the new Guadiana River Basin Management Plan, GRBMP, still under discussion). Results indicate that current patterns of excessive water use for irrigation in the basin may put environmental flow demands at risk, jeopardizing the WFD's goal of restoring the 'good ecological status' of water bodies by 2015. Conflicts between environmental and agricultural water uses will be stressed during prolonged dry episodes, and particularly in summer low-flow periods, when there is an important increase of crop irrigation water requirements. Securing minimum stream flows would entail a substantial reduction in irrigation water use for rice cultivation, which might affect the profitability and economic viability of small rice-growing farms located upstream in the river. The new GRBMP could contribute

A knowledge integration approach to flood vulnerability

Science.gov (United States)

Mazzorana, Bruno; Fuchs, Sven

2014-05-01

Understanding, qualifying and quantifying vulnerability is an essential need for implementing effective and efficient flood risk mitigation strategies; in particular if possible synergies between different mitigation alternatives, such as active and passive measures, should be achieved. In order to combine different risk management options it is necessary to take an interdisciplinary approach to vulnerability reduction, and as a result the affected society may be willing to accept a certain degree of self-responsibility. However, due to differing mono-disciplinary approaches and regional foci undertaken until now, different aspects of vulnerability to natural hazards in general and to floods in particular remain uncovered and as a result the developed management options remain sub-optimal. Taking an even more fundamental viewpoint, the empirical vulnerability functions used in risk assessment specifically fail to capture physical principles of the damage-generating mechanisms to the build environment. The aim of this paper is to partially close this gap by discussing a balanced knowledge integration approach which can be used to resolve the multidisciplinary disorder in flood vulnerability research. Modelling techniques such as mathematical-physical modelling of the flood hazard impact to and response from the building envelope affected, and formative scenario analyses of possible consequences in terms of damage and loss are used in synergy to provide an enhanced understanding of vulnerability and to render the derived knowledge into interdisciplinary mitigation strategies. The outlined formal procedure allows for a convincing knowledge alignment of quantified, but partial, information about vulnerability as a result of the application of physical and engineering notions and valuable, but often underspecified, qualitative argumentation strings emerging from the adopted socio-economic viewpoint.

Narrative Financial Therapy: Integrating a Financial Planning Approach with Therapeutic Theory

Directory of Open Access Journals (Sweden)

Megan A. McCoy

2014-03-01

Full Text Available The article serves as one of the first attempts to develop an integrated theoretical approach to financial therapy that can be used by practitioners from multiple disciplines. The presented approach integrates the components of the six-step financial planning process with components of empirically-supported therapeutic methods. This integration provides the foundation for a manualized approach to financial therapy, shaped by the writings of narrative theorists and select cognitive-behavioral interventions that can be used both by mental health and financial professionals.

Evaluation of POE and instructor-led problem-solving approaches integrated into force and motion lecture classes using a model analysis technique

International Nuclear Information System (INIS)

Rakkapao, S; Pengpan, T; Srikeaw, S; Prasitpong, S

2014-01-01

This study aims to investigate the use of the predict–observe–explain (POE) approach integrated into large lecture classes on forces and motion. It is compared to the instructor-led problem-solving method using model analysis. The samples are science (SC, N = 420) and engineering (EN, N = 434) freshmen, from Prince of Songkla University, Thailand. Research findings from the force and motion conceptual evaluation indicate that the multimedia-supported POE method promotes students’ learning better than the problem-solving method, in particular for the velocity and acceleration concepts. There is a small shift of the students’ model states after the problem-solving instruction. Moreover, by using model analysis instructors are able to investigate students’ misconceptions and evaluate teaching methods. It benefits instructors in organizing subsequent instructional materials. (paper)

PULSE: Integrated Parametric Modeling for a Shading System : From Daylight Optimization to Additive Manufacturing

NARCIS (Netherlands)

Teeling, M.V.M.T.; Turrin, M.; de Ruiter, P.; Turrin, Michela; Peters, Brady; O'Brien, William; Stouffs, Rudi; Dogan, Timur

2017-01-01

This paper presents a parametric approach to an integrated and performance-oriented design, from the conceptual design phase towards materialization. The novelty occurs in the use of parametric models as a way of integrating multidisciplinary design constraints, from daylight optimization to the

A systematic approach to the planning, implementation, monitoring, and evaluation of integrated health services.

Science.gov (United States)

Reynolds, Heidi W; Sutherland, Elizabeth G

2013-05-06

Because of the current emphasis and enthusiasm focused on integration of health systems, there is a risk of piling resources into integrated strategies without the necessary systems in place to monitor their progress adequately or to measure impact, and to learn from these efforts. The rush to intervene without adequate monitoring and evaluation will continue to result in a weak evidence base for decision making and resource allocation. Program planning and implementation are inextricability linked to monitoring and evaluation. Country level guidance is needed to identify country-specific integrated strategies, thereby increasing country ownership. This paper focuses on integrated health services but takes into account how health services are influenced by the health system, managed by programs, and made up of interventions. We apply the principles in existing comprehensive monitoring and evaluation (M&E) frameworks in order to outline a systematic approach to the M&E of integration for the country level. The approach is grounded by first defining the country-specific health challenges that integration is intended to affect. Priority points of contact for care can directly influence health, and essential packages of integration for all major client presentations need to be defined. Logic models are necessary to outline the plausible causal pathways and define the inputs, roles and responsibilities, indicators, and data sources across the health system. Finally, we recommend improvements to the health information system and in data use to ensure that data are available to inform decisions, because changes in the M&E function to make it more integrated will also facilitate integration in the service delivery, planning, and governance components. This approach described in the paper is the ideal, but its application at the country level can help reveal gaps and guide decisions related to what health services to prioritize for integration, help plan for how to

Qualitative Analysis of Integration Adapter Modeling

OpenAIRE

Ritter, Daniel; Holzleitner, Manuel

2015-01-01

Integration Adapters are a fundamental part of an integration system, since they provide (business) applications access to its messaging channel. However, their modeling and configuration remain under-represented. In previous work, the integration control and data flow syntax and semantics have been expressed in the Business Process Model and Notation (BPMN) as a semantic model for message-based integration, while adapter and the related quality of service modeling were left for further studi...

Intelligent Transportation and Evacuation Planning A Modeling-Based Approach

CERN Document Server

Naser, Arab

2012-01-01

Intelligent Transportation and Evacuation Planning: A Modeling-Based Approach provides a new paradigm for evacuation planning strategies and techniques. Recently, evacuation planning and modeling have increasingly attracted interest among researchers as well as government officials. This interest stems from the recent catastrophic hurricanes and weather-related events that occurred in the southeastern United States (Hurricane Katrina and Rita). The evacuation methods that were in place before and during the hurricanes did not work well and resulted in thousands of deaths. This book offers insights into the methods and techniques that allow for implementing mathematical-based, simulation-based, and integrated optimization and simulation-based engineering approaches for evacuation planning. This book also: Comprehensively discusses the application of mathematical models for evacuation and intelligent transportation modeling Covers advanced methodologies in evacuation modeling and planning Discusses principles a...

An integrated approach for integrated intelligent instrumentation and control system (I3CS)

International Nuclear Information System (INIS)

Jung, C.H.; Kim, J.T.; Kwon, K.C.

1997-01-01

Nuclear power plants to guarantee the safety of public should be designed to reduce the operator intervention resulting in operating human errors, identify the process states in transients, and aid to make a decision of their tasks and guide operator actions. For the sake of this purpose, MMIS(MAN-Machine Interface System) in NPPs should be the integrated top-down approach tightly focused on the function-based task analysis including an advanced digital technology, an operator support function, and so on. The advanced I and C research team in KAERI has embarked on developing an Integrated Intelligent Instrumentation and Control System (I 3 CS) for Korea's next generation nuclear power plants. I 3 CS bases the integrated top-down approach on the function-based task analysis, modern digital technology, standardization and simplification, availability and reliability, and protection of investment. (author). 4 refs, 6 figs

Design of pressure vessels using shape optimization: An integrated approach

Energy Technology Data Exchange (ETDEWEB)

Carbonari, R.C., E-mail: ronny@usp.br [Department of Mechatronic Engineering, Escola Politecnica da Universidade de Sao Paulo, Av. Prof. Mello Moraes, 2231 Sao Paulo, SP 05508-900 (Brazil); Munoz-Rojas, P.A., E-mail: pablo@joinville.udesc.br [Department of Mechanical Engineering, Universidade do Estado de Santa Catarina, Bom Retiro, Joinville, SC 89223-100 (Brazil); Andrade, E.Q., E-mail: edmundoq@petrobras.com.br [CENPES, PDP/Metodos Cientificos, Petrobras (Brazil); Paulino, G.H., E-mail: paulino@uiuc.edu [Newmark Laboratory, Department of Civil and Environmental Engineering, University of Illinois at Urbana-Champaign, 205 North Mathews Av., Urbana, IL 61801 (United States); Department of Mechanical Science and Engineering, University of Illinois at Urbana-Champaign, 158 Mechanical Engineering Building, 1206 West Green Street, Urbana, IL 61801-2906 (United States); Nishimoto, K., E-mail: knishimo@usp.br [Department of Naval Architecture and Ocean Engineering, Escola Politecnica da Universidade de Sao Paulo, Av. Prof. Mello Moraes, 2231 Sao Paulo, SP 05508-900 (Brazil); Silva, E.C.N., E-mail: ecnsilva@usp.br [Department of Mechatronic Engineering, Escola Politecnica da Universidade de Sao Paulo, Av. Prof. Mello Moraes, 2231 Sao Paulo, SP 05508-900 (Brazil)

2011-05-15

Previous papers related to the optimization of pressure vessels have considered the optimization of the nozzle independently from the dished end. This approach generates problems such as thickness variation from nozzle to dished end (coupling cylindrical region) and, as a consequence, it reduces the optimality of the final result which may also be influenced by the boundary conditions. Thus, this work discusses shape optimization of axisymmetric pressure vessels considering an integrated approach in which the entire pressure vessel model is used in conjunction with a multi-objective function that aims to minimize the von-Mises mechanical stress from nozzle to head. Representative examples are examined and solutions obtained for the entire vessel considering temperature and pressure loading. It is noteworthy that different shapes from the usual ones are obtained. Even though such different shapes may not be profitable considering present manufacturing processes, they may be competitive for future manufacturing technologies, and contribute to a better understanding of the actual influence of shape in the behavior of pressure vessels. - Highlights: > Shape optimization of entire pressure vessel considering an integrated approach. > By increasing the number of spline knots, the convergence stability is improved. > The null angle condition gives lower stress values resulting in a better design. > The cylinder stresses are very sensitive to the cylinder length. > The shape optimization of the entire vessel must be considered for cylinder length.

Modelling of population dynamics of red king crab using Bayesian approach

Directory of Open Access Journals (Sweden)

Bakanev Sergey ...

2012-10-01

Modeling population dynamics based on the Bayesian approach enables to successfully resolve the above issues. The integration of the data from various studies into a unified model based on Bayesian parameter estimation method provides a much more detailed description of the processes occurring in the population.

A Graph Based Framework to Model Virus Integration Sites

Directory of Open Access Journals (Sweden)

Raffaele Fronza

2016-01-01

Here, we addressed the challenge to: 1 define the notion of CIS on graph models, 2 demonstrate that the structure of CIS enters in the category of scale-free networks and 3 show that our network approach analyzes CIS dynamically in an integrated systems biology framework using the Retroviral Transposon Tagged Cancer Gene Database (RTCGD as a testing dataset.

Intrinsic ethics regarding integrated assessment models for climate management.

Science.gov (United States)