Biospheric Life Support - integrating biological regeneration into protection of humans in space.

Science.gov (United States)

Rocha, Mauricio; Iha, Koshun

2016-07-01

retirement (2016). The extension will allow partner agencies to deploy new experiments there, resuming basic research focusing more forward-looking goals. For deep-space, since consumables logistics becomes more difficult- and habitability an issue, with diminishing Earth's view, further research has been recommended. Four major areas have been identified for human protection: (1) radiation mitigation; (2) highly recyclable bio-regenerative (BR) LSS; (3) micro-gravity countermeasures- including artificial gravity (AG), and (4) psychological safety. To contribute to the efforts to address these issues, a basic lab/virtual iterative research has been proposed, assuming (in a worst case scenario) that: I) It won't be possible to send people to long deep space missions, safely, with the current (low quality of life) support technology (ISS micro-gravity 'up-gradings'); II) The alternative to implant a Mars surface human supportive biosphere would also not be possible, due to environmental/ evolutionary restraints (life could adapt and survive, but not necessarily to favor humans). From the above considerations arises the question: Would an average approach be possible where, by applying the artificial gravity concept to S/Cs, a fragment of Earth bio-regenerative environment could be integrated inside reusable manned vehicles- thus enhancing its habitability/autonomy in long deep space missions? For this research question a provisory answer/hypothesis has been provided. And to test it, a small AG+BR bench simulator (plus computer methods) has been devised.

Forecasting carbon budget under climate change and CO2 fertilization for subtropical region in China using integrated biosphere simulator (IBIS) model

Science.gov (United States)

Zhu, Q.; Jiang, H.; Liu, J.; Peng, C.; Fang, X.; Yu, S.; Zhou, G.; Wei, X.; Ju, W.

2011-01-01

The regional carbon budget of the climatic transition zone may be very sensitive to climate change and increasing atmospheric CO2 concentrations. This study simulated the carbon cycles under these changes using process-based ecosystem models. The Integrated Biosphere Simulator (IBIS), a Dynamic Global Vegetation Model (DGVM), was used to evaluate the impacts of climate change and CO2 fertilization on net primary production (NPP), net ecosystem production (NEP), and the vegetation structure of terrestrial ecosystems in Zhejiang province (area 101,800 km2, mainly covered by subtropical evergreen forest and warm-temperate evergreen broadleaf forest) which is located in the subtropical climate area of China. Two general circulation models (HADCM3 and CGCM3) representing four IPCC climate change scenarios (HC3AA, HC3GG, CGCM-sresa2, and CGCM-sresb1) were used as climate inputs for IBIS. Results show that simulated historical biomass and NPP are consistent with field and other modelled data, which makes the analysis of future carbon budget reliable. The results indicate that NPP over the entire Zhejiang province was about 55 Mt C yr-1 during the last half of the 21st century. An NPP increase of about 24 Mt C by the end of the 21st century was estimated with the combined effects of increasing CO2 and climate change. A slight NPP increase of about 5 Mt C was estimated under the climate change alone scenario. Forests in Zhejiang are currently acting as a carbon sink with an average NEP of about 2.5 Mt C yr-1. NEP will increase to about 5 Mt C yr-1 by the end of the 21st century with the increasing atmospheric CO2 concentration and climate change. However, climate change alone will reduce the forest carbon sequestration of Zhejiang's forests. Future climate warming will substantially change the vegetation cover types; warm-temperate evergreen broadleaf forest will be gradually substituted by subtropical evergreen forest. An increasing CO2 concentration will have little

Dose assessment considering evolution of the biosphere

International Nuclear Information System (INIS)

Karlsson, Sara; Bergstroem, Ulla

2002-01-01

Swedish Nuclear Fuel and Waste Management AB (SKB) is presently updating the safety assessment for SFR (Final repository for radioactive operational waste) in Sweden. The bio-spheric part of the analysis is performed by Studsvik Eco and Safety AB. According to the regulations the safety of the repository has to be accounted for different possible courses of the development of the biosphere. A number of studies have been carried out during the past years to investigate and document the biosphere in the area surrounding the repository. Modelling of shore-level displacement by land uplift, coastal water exchange and sedimentation have provided data for prediction of the evolution of the area. The prediction is done without considering a future change in climatic conditions. The results from this study show that accumulation of radionuclides in sediments is an important process to simulate when performing dose assessments covering biosphere evolution. The dose calculated for the first years of the period with agricultural use of the contaminated sediments may be severely underestimated in a scenario with large accumulation in coastal and lake stages. (LN)

Exploring global carbon turnover and radiocarbon cycling in terrestrial biosphere models

Science.gov (United States)

Graven, H. D.; Warren, H.

2017-12-01

The uptake of carbon into terrestrial ecosystems through net primary productivity (NPP) and the turnover of that carbon through various pathways are the fundamental drivers of changing carbon stocks on land, in addition to human-induced and natural disturbances. Terrestrial biosphere models use different formulations for carbon uptake and release, resulting in a range of values in NPP of 40-70 PgC/yr and biomass turnover times of about 25-40 years for the preindustrial period in current-generation models from CMIP5. Biases in carbon uptake and turnover impact simulated carbon uptake and storage in the historical period and later in the century under changing climate and CO2 concentration, however evaluating global-scale NPP and carbon turnover is challenging. Scaling up of plot-scale measurements involves uncertainty due to the large heterogeneity across ecosystems and biomass types, some of which are not well-observed. We are developing the modelling of radiocarbon in terrestrial biosphere models, with a particular focus on decadal 14C dynamics after the nuclear weapons testing in the 1950s-60s, including the impact of carbon flux trends and variability on 14C cycling. We use an estimate of the total inventory of excess 14C in the biosphere constructed by Naegler and Levin (2009) using a 14C budget approach incorporating estimates of total 14C produced by the weapons tests and atmospheric and oceanic 14C observations. By simulating radiocarbon in simple biosphere box models using carbon fluxes from the CMIP5 models, we find that carbon turnover is too rapid in many of the simple models - the models appear to take up too much 14C and release it too quickly. Therefore many CMIP5 models may also simulate carbon turnover that is too rapid. A caveat is that the simple box models we use may not adequately represent carbon dynamics in the full-scale models. Explicit simulation of radiocarbon in terrestrial biosphere models would allow more robust evaluation of biosphere

Lessons Learned from Biosphere 2: When Viewed as a Ground Simulation/Analogue for Long Duration Human Space Exploration and Settlement

Science.gov (United States)

MacCallum, T.; Poynter, J.; Bearden, D.

A human mission to Mars, or a base on the Moon or Mars, is a longer and more complex mission than any space endeavor undertaken to date. Ground simulations provide a relevant, analogous environment for testing technologies and learning how to manage complex, long duration missions, while addressing inherent mission risks. Multiphase human missions and settlements that may preclude a rapid return to Earth, require high fidelity, end-to-end, at least full mission duration tests in order to evaluate a system's ability to sustain the crew for the entire mission and return the crew safely to Earth. Moreover, abort scenarios are essentially precluded in many mission scenarios, though certain risks may only become evident late in the mission. Aging and compounding effects cannot be simulated through accelerated tests for all aspects of the mission. Until such high fidelity long duration simulations are available, and in order to help prepare those simulations and mission designs, it is important to extract as many lessons as possible from analogous environments. Possibly the best analogue for a long duration space mission is the two year mission of Biosphere 2. Biosphere 2 is a three-acre materially closed ecological system that supported eight crewmembers with food, air and water in a sunlight driven bioregenerative system for two years. It was designed for research applicable to environmental management on Earth and the development of human life support for space. A brief overview of the two-year Biosphere 2 mission is presented, followed by select data and lessons learned that are applicable to the design and operation of a long duration human space mission, settlement or test bed. These lessons include technical, programmatic, and psychological issues

Using remote-sensing and the Simple Biosphere model (SiB4) to analyze the seasonality and productivity of the terrestrial biosphere.

Science.gov (United States)

Cheeseman, M.; Denning, S.; Baker, I. T.

2017-12-01

Understanding the variability and seasonality of carbon fluxes from the terrestrial biosphere is integral to understanding the mechanisms and drivers of the global carbon cycle. However, there are many regions across the globe where in situ observations are sparse, such as the Amazon rainforest and the African Sahel. The latest version of the Simple-Biosphere model (SiB4) predicts a suite of biophysical variables such as terrestrial carbon flux (GPP), solar induced fluorescence (SIF), fraction of photosynthetically active radiation (FPAR), and leaf area index (LAI). By comparing modeled values to a suite of satellite and in situ observations we produce a robust analysis of the seasonality and productivity of the terrestrial biosphere in a variety of biome types across the globe.

Biosphere science news roundup. The Center for Biospheric Education and Research

Science.gov (United States)

Cotten, J H

1994-01-01

The Center for Biospheric Education and Research (CBER) is an exciting and truly unique addition to The Huntsville-Madison County Botanical Garden. The mission of CBER is to increase the knowledge and understanding of closed ecological life support systems, including both natural and man-made biospheres. Its primary emphasis will be on the Earth biosphere with particular attention to the role of plants in maintaining a balanced environment. Secondary emphasis will be on the space station and lunar habitation biospheres, both of which employ plants for environmental control, food, and aesthetics. CBER will serve as a catalyst providing both a forum and a facility for research, education, and display of methodologies and technologies relevant to the creation and maintenance of such biospheric systems.

Building capital through bioregional planning and biosphere reserves

Directory of Open Access Journals (Sweden)

David Brunckhorst

2001-02-01

Full Text Available ABSTRACT: The need to implement innovative approaches to sustainability is now more critical than ever. This discussion draws on parts of the puzzle that must be assembled to achieve integrated, cross-tenure and jurisdictional management of whole regions and their peoples for a sustainable future. A regional, landscape ecology approach helps us to move on from theory and historical lessons to boldly design and adaptively develop novel on-ground models. To take an entirely different approach from conventional thinking, I draw from Common Property Resource (CPR theory and experience, together with practical experience from the Bookmark Biosphere project. The characteristics of successful enduring Common Property regimes are identified and discussed in light of critical needs to maintain and restore social and ecological capital. I then highlight the concepts and logistical objectives behind the 30-year-old UNESCO Biosphere Reserve Program, which appears to have great potential as an operational framework within which these changes can be made. The Biosphere Reserve Program is maturing through integration of cultural needs and aspirations for quality of life, while conserving natural values and ecosystem processes. In particular, progress is being made through bioregional planning and management incorporating a variety of IUCN protected area types with novel, sustainable, resource-use diversification. The novel arrangements, experience and lessons from one developing model, Bookmark Biosphere Reserve in South Australia, are described as an example. I wish to encourage more models like the Bookmark experiment to evolve through even greater creativity and engagement with public and private partners. On-ground models that demonstrate innovative alternative land use management in the rangelands or integration across the coastal-marine interface are especially needed.

A Biosphere Assessment: Influence due to Geosphere-Biosphere Interfaces

International Nuclear Information System (INIS)

Lee, Youn Myoung; Hwang, Yong Soo

2009-01-01

Recently the geosphere-biosphere interfaces (GBIs), which is recognized as a zone (GBIZ) beyond the simple conceptual boundaries between the geosphere and biosphere modeling domains for safety assessment, has been raised to an important issue for the biosphere assessment. For the licensing process of the repository, the final step of a series of safety and performance assessment should be concerned how nuclides released from the geological media could make their farther transfer in the biosphere giving rise to doses to humans. Unlike in the case of geosphere, the distinct characteristics of biosphere modeling includes the potential release and subsequent exposure taking place not in the near future with rather unreliable predictions of human behavior at the time of its release. And also unlike the near- and far-field of geospheres such as near field engineering structures and natural geological media, the biosphere is not conceived as a barrier itself that could be well designed or optimized, which always causes the necessity of site-specific modeling approach as much as possible. Through every step of whole geosphere and biosphere modeling, nuclides transport from various geological media to the biosphere over the GBI, biosphere modeling can be done independently, not even knowing what happens in the geosphere, making access possible to it in a separate manner, even though, to some extent, it might somehow need to be accounted for geosphere transport, as is similarly being currently done in many other countries. In general, to show the performance of the repository, dose exposure to the critical group due to nuclide release from the repository should be evaluated and the results compared to the risk or dose presented by regulatory bodies, as safety and performance criteria for HLW repository are usually expressed in terms of quantitative risk or dose. For a real site-specific treatment and incorporation of geological features such as aquifers into the biosphere

The Biosphere.

Science.gov (United States)

Cloud, Preston

1983-01-01

Discusses the earth's biosphere, considering how the microbial, animal and plant life (which make up the biosphere) are sustained by the earth's lithosphere, hydrosphere, and atmosphere. Also considers how these three earth features have powerfully shaped the evolution of these organisms. (JN)

Biosphere data base revision

International Nuclear Information System (INIS)

Bergstroem, U.; Andersson, K.; Sundblad, B.

1985-12-01

The turnover of long-lived radionuclides in the biosphere has been modelled some time ago and the exposure to man was calculated. The nuclides were long-lived actinides and fission products leaking from a simulated deep rock repository for spent nuclear fuel. The data base for these calculations has been updated in the present work and in addition a number of nuclides that were not included in the earlier work have been treated. (G.B.)

Posiva biosphere assessment: Revised structure and status 2006

International Nuclear Information System (INIS)

Ikonen, A.

2006-12-01

Posiva's Safety Case is organised into a portfolio consisting of ten main component reports of which the Biosphere Assessment is one. To better facilitate the iterative assessment process by different task groups, the Biosphere Assessment is now organised into a sub-portfolio having folders for reports on specific topics: Site and evolution describes the past, present and future conditions of the surface system of the Olkiluoto site; Biosphere processes contain descriptions of processes prevailing at the site now and in future; Module Descriptions document the radionuclide transport models; Biosphere Assessment Data reports the parameter data used in the assessment with full references to their origin; Cases and variants provide mainly the simulated concentrations in the environmental media as a part of the actual assessment; Exposures of total environment draw conclusions on the dose and effect implications on the basis of the concentrations provided in Cases and variants. Finally, the biosphere assessment is consolidated in the summary report providing the needed high-level information to the main Safety Case and referring to the individual background reports for the details. In addition to the specific folders of the Biosphere Assessment Portfolio, there are also a number of overlapping issues to be considered throughout the assessment. Most important of those are the handling of the geosphere-biosphere interface and the future human activities, and the thorough knowledge quality assessment, the last of which provides tools to evaluate the overall uncertainty and consistency of and confidence to the assessment. In this report, the current strategy of modelling the different aspects of the biosphere from the site investigations to the doses is discussed, and the Biosphere Assessment Portfolio is introduced. Requirements and recommendations are given to the individual folders and/or reports to steer the extensive biosphere modelling and assessment work towards a

A terrestrial biosphere model optimized to atmospheric CO2 concentration and above ground woody biomass

Science.gov (United States)

Saito, M.; Ito, A.; Maksyutov, S. S.

2013-12-01

This study documents an optimization of a prognostic biosphere model (VISIT; Vegetation Integrative Similator for Trace gases) to observations of atmospheric CO2 concentration and above ground woody biomass by using a Bayesian inversion method combined with an atmospheric tracer transport model (NIES-TM; National Institute for Environmental Studies / Frontier Research Center for Global Change (NIES/FRCGC) off-line global atmospheric tracer transport model). The assimilated observations include 74 station records of surface atmospheric CO2 concentration and aggregated grid data sets of above ground woody biomass (AGB) and net primary productivity (NPP) over the globe. Both the biosphere model and the atmospheric transport model are used at a horizontal resolution of 2.5 deg x 2.5 deg grid with temporal resolutions of a day and an hour, respectively. The atmospheric transport model simulates atmospheric CO2 concentration with nine vertical levels using daily net ecosystem CO2 exchange rate (NEE) from the biosphere model, oceanic CO2 flux, and fossil fuel emission inventory. The models are driven by meteorological data from JRA-25 (Japanese 25-year ReAnalysis) and JCDAS (JMA Climate Data Assimilation System). Statistically optimum physiological parameters in the biosphere model are found by iterative minimization of the corresponding Bayesian cost function. We select thirteen physiological parameter with high sensitivity to NEE, NPP, and AGB for the minimization. Given the optimized physiological parameters, the model shows error reductions in seasonal variation of the CO2 concentrations especially in the northern hemisphere due to abundant observation stations, while errors remain at a few stations that are located in coastal coastal area and stations in the southern hemisphere. The model also produces moderate estimates of the mean magnitudes and probability distributions in AGB and NPP for each biome. However, the model fails in the simulation of the terrestrial

Use of midlatitude soil moisture and meteorological observations to validate soil moisture simulations with biosphere and bucket models

Science.gov (United States)

Robock, Alan; Vinnikov, Konstantin YA.; Schlosser, C. Adam; Speranskaya, Nina A.; Xue, Yongkang

1995-01-01

Soil moisture observations in sites with natural vegetation were made for several decades in the former Soviet Union at hundreds of stations. In this paper, the authors use data from six of these stations from different climatic regimes, along with ancillary meteorological and actinometric data, to demonstrate a method to validate soil moisture simulations with biosphere and bucket models. Some early and current general circulation models (GCMs) use bucket models for soil hydrology calculations. More recently, the Simple Biosphere Model (SiB) was developed to incorporate the effects of vegetation on fluxes of moisture, momentum, and energy at the earth's surface into soil hydrology models. Until now, the bucket and SiB have been verified by comparison with actual soil moisture data only on a limited basis. In this study, a Simplified SiB (SSiB) soil hydrology model and a 15-cm bucket model are forced by observed meteorological and actinometric data every 3 h for 6-yr simulations at the six stations. The model calculations of soil moisture are compared to observations of soil moisture, literally 'ground truth,' snow cover, surface albedo, and net radiation, and with each other. For three of the stations, the SSiB and 15-cm bucket models produce good simulations of seasonal cycles and interannual variations of soil moisture. For the other three stations, there are large errors in the simulations by both models. Inconsistencies in specification of field capacity may be partly responsible. There is no evidence that the SSiB simulations are superior in simulating soil moisture variations. In fact, the models are quite similar since SSiB implicitly has a bucket embedded in it. One of the main differences between the models is in the treatment of runoff due to melting snow in the spring -- SSiB incorrectly puts all the snowmelt into runoff. While producing similar soil moisture simulations, the models produce very different surface latent and sensible heat fluxes, which

The Legacy of Biosphere 2 for Biospherics and Closed Ecological System Research

Science.gov (United States)

Allen, J.; Alling, A.; Nelson, M.

The unprecedented challenges of creating Biosphere 2, the world's first laboratory for biospherics, the study of global ecology and long-term closed ecological system dynamics led to breakthrough developments in many fields, and a deeper understanding of the opportunities and difficulties of material closure. This paper will review these accomplishments and challenges, citing some of the key research accomplishments and publications which have resulted from the experiments in Biosphere 2. Engineering accomplishments included development of a technique for variable volume to deal with pressure differences between the facility and outside environment, developing methods of leak detection and sealing, and achieving new standards of closure, with an annual atmospheric leakrate of less than 10%, or less than 300 ppm per day. This degree of closure permitted detailed tracking of carbon dioxide, oxygen, and trace gases such as nitrous oxide and ethylene over the seasonal variability of two years. Full closure also necessitated developing new approaches and technologies for complete air, water, and wastewater recycle and reuse within the facility. The development of a soil-based highly productive agricultural system was a first in closed ecological systems, and much was learned about managing a wide variety of crops using non-chemical means of pest and disease control. Closed ecological systems have different temporal b ogeochemical cycling and ranges ofi atmospheric components because of their smaller reservoirs of air, water and soil, and higher concentration of biomass, and Biosphere 2 provided detailed examination and modeling of these accelerated cycles over a period of closure which measured in years. Medical research inside Biosphere 2 included the effects on humans of lowered oxygen: the discovery that human productivity can be maintained down to 15% oxygen could lead to major economies on the design of space stations and planetary/lunar settlements. The improved

Spanish methodological approach for biosphere assessment of radioactive waste disposal

International Nuclear Information System (INIS)

Agueero, A.; Pinedo, P.; Cancio, D.; Simon, I.; Moraleda, M.; Perez-Sanchez, D.; Trueba, C.

2007-01-01

The development of radioactive waste disposal facilities requires implementation of measures that will afford protection of human health and the environment over a specific temporal frame that depends on the characteristics of the wastes. The repository design is based on a multi-barrier system: (i) the near-field or engineered barrier, (ii) far-field or geological barrier and (iii) the biosphere system. Here, the focus is on the analysis of this last system, the biosphere. A description is provided of conceptual developments, methodological aspects and software tools used to develop the Biosphere Assessment Methodology in the context of high-level waste (HLW) disposal facilities in Spain. This methodology is based on the BIOMASS 'Reference Biospheres Methodology' and provides a logical and systematic approach with supplementary documentation that helps to support the decisions necessary for model development. It follows a five-stage approach, such that a coherent biosphere system description and the corresponding conceptual, mathematical and numerical models can be built. A discussion on the improvements implemented through application of the methodology to case studies in international and national projects is included. Some facets of this methodological approach still require further consideration, principally an enhanced integration of climatology, geography and ecology into models considering evolution of the environment, some aspects of the interface between the geosphere and biosphere, and an accurate quantification of environmental change processes and rates

Spanish methodological approach for biosphere assessment of radioactive waste disposal.

Science.gov (United States)

Agüero, A; Pinedo, P; Cancio, D; Simón, I; Moraleda, M; Pérez-Sánchez, D; Trueba, C

2007-10-01

The development of radioactive waste disposal facilities requires implementation of measures that will afford protection of human health and the environment over a specific temporal frame that depends on the characteristics of the wastes. The repository design is based on a multi-barrier system: (i) the near-field or engineered barrier, (ii) far-field or geological barrier and (iii) the biosphere system. Here, the focus is on the analysis of this last system, the biosphere. A description is provided of conceptual developments, methodological aspects and software tools used to develop the Biosphere Assessment Methodology in the context of high-level waste (HLW) disposal facilities in Spain. This methodology is based on the BIOMASS "Reference Biospheres Methodology" and provides a logical and systematic approach with supplementary documentation that helps to support the decisions necessary for model development. It follows a five-stage approach, such that a coherent biosphere system description and the corresponding conceptual, mathematical and numerical models can be built. A discussion on the improvements implemented through application of the methodology to case studies in international and national projects is included. Some facets of this methodological approach still require further consideration, principally an enhanced integration of climatology, geography and ecology into models considering evolution of the environment, some aspects of the interface between the geosphere and biosphere, and an accurate quantification of environmental change processes and rates.

The Impact of Prior Biosphere Models in the Inversion of Global Terrestrial CO2 Fluxes by Assimilating OCO-2 Retrievals

Science.gov (United States)

Philip, Sajeev; Johnson, Matthew S.

2018-01-01

Atmospheric mixing ratios of carbon dioxide (CO2) are largely controlled by anthropogenic emissions and biospheric fluxes. The processes controlling terrestrial biosphere-atmosphere carbon exchange are currently not fully understood, resulting in terrestrial biospheric models having significant differences in the quantification of biospheric CO2 fluxes. Atmospheric transport models assimilating measured (in situ or space-borne) CO2 concentrations to estimate "top-down" fluxes, generally use these biospheric CO2 fluxes as a priori information. Most of the flux inversion estimates result in substantially different spatio-temporal posteriori estimates of regional and global biospheric CO2 fluxes. The Orbiting Carbon Observatory 2 (OCO-2) satellite mission dedicated to accurately measure column CO2 (XCO2) allows for an improved understanding of global biospheric CO2 fluxes. OCO-2 provides much-needed CO2 observations in data-limited regions facilitating better global and regional estimates of "top-down" CO2 fluxes through inversion model simulations. The specific objectives of our research are to: 1) conduct GEOS-Chem 4D-Var assimilation of OCO-2 observations, using several state-of-the-science biospheric CO2 flux models as a priori information, to better constrain terrestrial CO2 fluxes, and 2) quantify the impact of different biospheric model prior fluxes on OCO-2-assimilated a posteriori CO2 flux estimates. Here we present our assessment of the importance of these a priori fluxes by conducting Observing System Simulation Experiments (OSSE) using simulated OCO-2 observations with known "true" fluxes.

The legacy of Biosphere 2 for the study of biospherics and closed ecological systems.

Science.gov (United States)

Allen, J P; Nelson, M; Alling, A

2003-01-01

The unprecedented challenges of creating Biosphere 2, the world's first laboratory for biospherics, the study of global ecology and long-term closed ecological system dynamics, led to breakthrough developments in many fields, and a deeper understanding of the opportunities and difficulties of material closure. This paper will review accomplishments and challenges, citing some of the key research findings and publications that have resulted from the experiments in Biosphere 2. Engineering accomplishments included development of a technique for variable volume to deal with pressure differences between the facility and outside environment, developing methods of atmospheric leak detection and sealing, while achieving new standards of closure, with an annual atmospheric leakrate of less than 10%, or less than 300 ppm per day. This degree of closure permitted detailed tracking of carbon dioxide, oxygen, and trace gases such as nitrous oxide and ethylene over the seasonal variability of two years. Full closure also necessitated developing new approaches and technologies for complete air, water, and wastewater recycle and reuse within the facility. The development of a soil-based highly productive agricultural system was a first in closed ecological systems, and much was learned about managing a wide variety of crops using non-chemical means of pest and disease control. Closed ecological systems have different temporal biogeochemical cycling and ranges of atmospheric components because of their smaller reservoirs of air, water and soil, and higher concentration of biomass, and Biosphere 2 provided detailed examination and modeling of these accelerated cycles over a period of closure which measured in years. Medical research inside Biosphere 2 included the effects on humans of lowered oxygen: the discovery that human productivity can be maintained with good health with lowered atmospheric oxygen levels could lead to major economies on the design of space stations and

The legacy of biosphere 2 for the study of biospherics and closed ecological systems

Science.gov (United States)

Allen, J. P.; Nelson, M.; Alling, A.

The unprecedented challenges of creating Biosphere 2, the world's first laboratory for biospherics, the study of global ecology and long-term closed ecological system dynamics, led to breakthrough developments in many fields, and a deeper understanding of the opportunities and difficulties of material closure. This paper will review accomplishments and challenges, citing some of the key research findings and publications that have resulted from the experiments in Biosphere 2. Engineering accomplishments included development of a technique for variable volume to deal with pressure differences between the facility and outside environment, developing methods of atmospheric leak detection and sealing, while achieving new standards of closure, with an annual atmospheric leakrate of less than 10%, or less than 300 ppm per day. This degree of closure permitted detailed tracking of carbon dioxide, oxygen, and trice gases such as nitrous oxide and ethylene over the seasonal variability of two years. Full closure also necessitated developing new approaches and technologies for complete air, water, and wastewater recycle and reuse within the facility. The development of a soil-based highly productive agricultural system was a first in closed ecological systems, and much was learned about managing a wide variety of crops using non-chemical means of pest and disease control. Closed ecological systems have different temporal biogeochemical cycling and ranges of atmospheric components because of their smaller reservoirs of air, water and soil, and higher concentration of biomass, and Biosphere 2 provided detailed examination and modeling of these accelerated cycles over a period of closure which measured in years. Medical research inside Biosphere 2 included the effects on humans of lowered oxygen: the discovery that human productivity can be maintained with good health with lowered atmospheric oxygen levels could lead to major economies on the design of space stations and

The Biosphere as a Living System. On Peculiarities of the Evolutionary Process on the Biosphere Level

Directory of Open Access Journals (Sweden)

Alexej Yablokov

2016-10-01

Full Text Available The main purpose of this second essay the “biospherology” is to streamline and formalize the existing knowledge about the biosphere, to develop the theoretical basis of the theory of evolution of the biosphere. Despite the vast amount of research on ways of origin and development of life, yet there is no generally accepted theory of evolution of life on Earth, which would not only contain the phenomenology of this process, but also an understanding of the mechanism of functioning of the biosphere as a self-regulating living organism. In the first essay, the necessity of such an understanding to preserve life-supporting functions of the biosphere under increasing anthropogenic pressure. As solution it has been proposed in the form of transition to the managed (controlled evolution of the biosphere – to process of maintenance of life-supporting ability of the biosphere by management of Humankind activity. This essay is an attempt to create a consistent picture of the structure and functioning of the Earth life, the main achievements of the evolution of life, led to the almost completely closed (to the Anthropocene self-sustaining biosphere cycling of substance and energy, the growth of "sum of life" and evolve the social form of matter from biological one. The proposed view of the multidimensional picture of life on Earth consists of the determination of necessary and sufficient properties of a life matter, formulate functioning principles of the life, and determind of the different levels of organization of life. Among the main features of living: discreetness, integritiness, self-reproducibility, dissymmetriness, cooperativeness, mortality, orderness, energy saturation, informational content. Among the main principles of the functioning of the life: the unity of the biological structure (phenotype and the program for its construction (genotype, transmitted in generations; matrix way of transmission of the programs of development

Biosphere reserves: Attributes for success.

Science.gov (United States)

Van Cuong, Chu; Dart, Peter; Hockings, Marc

2017-03-01

Biosphere reserves established under the UNESCO Man and the Biosphere Program aim to harmonise biodiversity conservation and sustainable development. Concerns over the extent to which the reserve network was living up to this ideal led to the development of a new strategy in 1995 (the Seville Strategy) to enhance the operation of the network of reserves. An evaluation of effectiveness of management of the biosphere reserve network was called for as part of this strategy. Expert opinion was assembled through a Delphi Process to identify successful and less successful reserves and investigate common factors influencing success or failure. Ninety biosphere reserves including sixty successful and thirty less successful reserves in 42 countries across all five Man and the Biosphere Program regions were identified. Most successful sites are the post-Seville generation while the majority of unsuccessful sites are pre-Seville that are managed as national parks and have not been amended to conform to the characteristics that are meant to define a biosphere reserve. Stakeholder participation and collaboration, governance, finance and resources, management, and awareness and communication are the most influential factors in the success or failure of the biosphere reserves. For success, the biosphere reserve concept needs to be clearly understood and applied through landscape zoning. Designated reserves then need a management system with inclusive good governance, strong participation and collaboration, adequate finance and human resource allocation and stable and responsible management and implementation. All rather obvious but it is difficult to achieve without commitment to the biosphere reserve concept by the governance authorities. Copyright © 2016 Elsevier Ltd. All rights reserved.

NACP Regional: Original Observation Data and Biosphere and Inverse Model Outputs

Data.gov (United States)

National Aeronautics and Space Administration — This data set contains the originally-submitted observation measurement data, terrestrial biosphere model output data, and inverse model simulations that various...

NACP Regional: Original Observation Data and Biosphere and Inverse Model Outputs

Data.gov (United States)

National Aeronautics and Space Administration — ABSTRACT: This data set contains the originally-submitted observation measurement data, terrestrial biosphere model output data, and inverse model simulations that...

Biosphere reserves in action: Case studies of the American experience

Energy Technology Data Exchange (ETDEWEB)

None

1995-06-26

For nearly 20 years, biosphere reserves have offered a unique framework for building the knowledge, skills, and attitudes required for conservation and sustainable use of ecosystems. The 12 case studies in this volume chronicle many of the cooperative efforts to implement the biosphere reserve concept in the United States. Considered together, these efforts involve more than 20 types of protected areas, and the participation of all levels of government, and many private organizations, academic institutions, citizens groups, and individuals. Biosphere reserves are multi-purpose areas that are nominated by the national committee of the Man and the Biosphere Program (MAB) and designated by the United Nations Educational, Scientific and Cultural Organization (UNESCO) to serve as demonstration areas for cooperation in building harmonious relationships between human activities and the conservation of ecosystems and biological diversity. Each biosphere reserve exemplifies the characteristic ecosystems of one of the worlds biogeographical regions. It is a land or coas%arine area involving human communities as integral components and including resources managed for objectives ranging from complete protection to intensive, yet sustainable development. A biosphere reserve is envisioned as a regional ''landscape for learning'' in which monitoring, research, education, and training are encouraged to support sustainable conservation of natural and managed ecosystems. It is a framework for regional cooperation involving government decisionmakers, scientists, resource managers, private organizations and local people (i.e., the biosphere reserve ''stakeholders''). Finally, each biosphere reserve is part of a global network for sharing information and experience to help address complex problems of conservation and development. The 12 case studies presented in this report represent only a few of the possible evolutions of a biosphere reserve in

Alternative biosphere modeling for safety assessment of HLW disposal taking account of geosphere-biosphere interface of marine environment

International Nuclear Information System (INIS)

Kato, Tomoko; Ishiguro, Katsuhiko; Naito, Morimasa; Ikeda, Takao; Little, Richard

2001-03-01

In the safety assessment of a high-level radioactive waste (HLW) disposal system, it is required to estimate radiological impacts on future human beings arising from potential radionuclide releases from a deep repository into the surface environment. In order to estimated the impacts, a biosphere model is developed by reasonably assuming radionuclide migration processes in the surface environment and relevant human lifestyles. It is important to modify the present biosphere models or to develop alternative biosphere models applying the biosphere models according to quality and quantify of the information acquired through the siting process for constructing the repository. In this study, alternative biosphere models were developed taking geosphere-biosphere interface of marine environment into account. Moreover, the flux to dose conversion factors calculated by these alternative biosphere models was compared with those by the present basic biosphere models. (author)

Sequential optimization of a terrestrial biosphere model constrained by multiple satellite based products

Science.gov (United States)

Ichii, K.; Kondo, M.; Wang, W.; Hashimoto, H.; Nemani, R. R.

2012-12-01

Various satellite-based spatial products such as evapotranspiration (ET) and gross primary productivity (GPP) are now produced by integration of ground and satellite observations. Effective use of these multiple satellite-based products in terrestrial biosphere models is an important step toward better understanding of terrestrial carbon and water cycles. However, due to the complexity of terrestrial biosphere models with large number of model parameters, the application of these spatial data sets in terrestrial biosphere models is difficult. In this study, we established an effective but simple framework to refine a terrestrial biosphere model, Biome-BGC, using multiple satellite-based products as constraints. We tested the framework in the monsoon Asia region covered by AsiaFlux observations. The framework is based on the hierarchical analysis (Wang et al. 2009) with model parameter optimization constrained by satellite-based spatial data. The Biome-BGC model is separated into several tiers to minimize the freedom of model parameter selections and maximize the independency from the whole model. For example, the snow sub-model is first optimized using MODIS snow cover product, followed by soil water sub-model optimized by satellite-based ET (estimated by an empirical upscaling method; Support Vector Regression (SVR) method; Yang et al. 2007), photosynthesis model optimized by satellite-based GPP (based on SVR method), and respiration and residual carbon cycle models optimized by biomass data. As a result of initial assessment, we found that most of default sub-models (e.g. snow, water cycle and carbon cycle) showed large deviations from remote sensing observations. However, these biases were removed by applying the proposed framework. For example, gross primary productivities were initially underestimated in boreal and temperate forest and overestimated in tropical forests. However, the parameter optimization scheme successfully reduced these biases. Our analysis

A simple integrated assessment approach to global change simulation and evaluation

Science.gov (United States)

Ogutu, Keroboto; D'Andrea, Fabio; Ghil, Michael

2016-04-01

We formulate and study the Coupled Climate-Economy-Biosphere (CoCEB) model, which constitutes the basis of our idealized integrated assessment approach to simulating and evaluating global change. CoCEB is composed of a physical climate module, based on Earth's energy balance, and an economy module that uses endogenous economic growth with physical and human capital accumulation. A biosphere model is likewise under study and will be coupled to the existing two modules. We concentrate on the interactions between the two subsystems: the effect of climate on the economy, via damage functions, and the effect of the economy on climate, via a control of the greenhouse gas emissions. Simple functional forms of the relation between the two subsystems permit simple interpretations of the coupled effects. The CoCEB model is used to make hypotheses on the long-term effect of investment in emission abatement, and on the comparative efficacy of different approaches to abatement, in particular by investing in low carbon technology, in deforestation reduction or in carbon capture and storage (CCS). The CoCEB model is very flexible and transparent, and it allows one to easily formulate and compare different functional representations of climate change mitigation policies. Using different mitigation measures and their cost estimates, as found in the literature, one is able to compare these measures in a coherent way.

European-wide simulations of croplands using an improved terrestrial biosphere model: Phenology and productivity

Science.gov (United States)

Smith, P. C.; de Noblet-Ducoudré, N.; Ciais, P.; Peylin, P.; Viovy, N.; Meurdesoif, Y.; Bondeau, A.

2010-03-01

Aiming at producing improved estimates of carbon source/sink spatial and interannual patterns across Europe (35% croplands), this work combines the terrestrial biosphere model Organizing Carbon and Hydrology in Dynamic Ecosystems (ORCHIDEE), for vegetation productivity, water balance, and soil carbon dynamics, and the generic crop model Simulateur Multidisciplinaire pour les Cultures Standard (STICS), for phenology, irrigation, nitrogen balance, and harvest. The ORCHIDEE-STICS model, relying on three plant functional types for the representation of temperate agriculture, is evaluated over the last few decades at various spatial and temporal resolutions. The simulated leaf area index seasonal cycle is largely improved relative to the original ORCHIDEE simulating grasslands, and compares favorably with remote-sensing observations (correlation doubles over Europe). Crop yield is derived from annual net primary productivity and compared with wheat and grain maize harvest data for five European countries. Discrepancies between 30 year mean simulated and reported yields are large in Mediterranean countries. Interannual variability amplitude expressed relative to the mean is reduced toward the observed variability (≈10%) when using ORCHIDEE-STICS. Overall, this study highlights the importance of accounting for the specific phenologies of crops sown both in winter and in spring and for irrigation applied to spring crops in regional/global models of the terrestrial carbon cycle. Limitations suggest to account for temporal and spatial variability in agricultural practices for further simulation improvement.

Quantifying the influence of the terrestrial biosphere on glacial-interglacial climate dynamics

Science.gov (United States)

Davies-Barnard, Taraka; Ridgwell, Andy; Singarayer, Joy; Valdes, Paul

2017-10-01

The terrestrial biosphere is thought to be a key component in the climatic variability seen in the palaeo-record. It has a direct impact on surface temperature through changes in surface albedo and evapotranspiration (so-called biogeophysical effects) and, in addition, has an important indirect effect through changes in vegetation and soil carbon storage (biogeochemical effects) and hence modulates the concentrations of greenhouse gases in the atmosphere. The biogeochemical and biogeophysical effects generally have opposite signs, meaning that the terrestrial biosphere could potentially have played only a very minor role in the dynamics of the glacial-interglacial cycles of the late Quaternary. Here we use a fully coupled dynamic atmosphere-ocean-vegetation general circulation model (GCM) to generate a set of 62 equilibrium simulations spanning the last 120 kyr. The analysis of these simulations elucidates the relative importance of the biogeophysical versus biogeochemical terrestrial biosphere interactions with climate. We find that the biogeophysical effects of vegetation account for up to an additional -0.91 °C global mean cooling, with regional cooling as large as -5 °C, but with considerable variability across the glacial-interglacial cycle. By comparison, while opposite in sign, our model estimates of the biogeochemical impacts are substantially smaller in magnitude. Offline simulations show a maximum of +0.33 °C warming due to an increase of 25 ppm above our (pre-industrial) baseline atmospheric CO2 mixing ratio. In contrast to shorter (century) timescale projections of future terrestrial biosphere response where direct and indirect responses may at times cancel out, we find that the biogeophysical effects consistently and strongly dominate the biogeochemical effect over the inter-glacial cycle. On average across the period, the terrestrial biosphere has a -0.26 °C effect on temperature, with -0.58 °C at the Last Glacial Maximum. Depending on

Quantifying the influence of the terrestrial biosphere on glacial–interglacial climate dynamics

Directory of Open Access Journals (Sweden)

T. Davies-Barnard

2017-10-01

Full Text Available The terrestrial biosphere is thought to be a key component in the climatic variability seen in the palaeo-record. It has a direct impact on surface temperature through changes in surface albedo and evapotranspiration (so-called biogeophysical effects and, in addition, has an important indirect effect through changes in vegetation and soil carbon storage (biogeochemical effects and hence modulates the concentrations of greenhouse gases in the atmosphere. The biogeochemical and biogeophysical effects generally have opposite signs, meaning that the terrestrial biosphere could potentially have played only a very minor role in the dynamics of the glacial–interglacial cycles of the late Quaternary. Here we use a fully coupled dynamic atmosphere–ocean–vegetation general circulation model (GCM to generate a set of 62 equilibrium simulations spanning the last 120 kyr. The analysis of these simulations elucidates the relative importance of the biogeophysical versus biogeochemical terrestrial biosphere interactions with climate. We find that the biogeophysical effects of vegetation account for up to an additional −0.91 °C global mean cooling, with regional cooling as large as −5 °C, but with considerable variability across the glacial–interglacial cycle. By comparison, while opposite in sign, our model estimates of the biogeochemical impacts are substantially smaller in magnitude. Offline simulations show a maximum of +0.33 °C warming due to an increase of 25 ppm above our (pre-industrial baseline atmospheric CO2 mixing ratio. In contrast to shorter (century timescale projections of future terrestrial biosphere response where direct and indirect responses may at times cancel out, we find that the biogeophysical effects consistently and strongly dominate the biogeochemical effect over the inter-glacial cycle. On average across the period, the terrestrial biosphere has a −0.26 °C effect on temperature, with −0.58 °C at the

Optimization of a prognostic biosphere model for terrestrial biomass and atmospheric CO2 variability

International Nuclear Information System (INIS)

Saito, M.; Ito, A.; Maksyutov, S.

2014-01-01

This study investigates the capacity of a prognostic biosphere model to simulate global variability in atmospheric CO 2 concentrations and vegetation carbon dynamics under current environmental conditions. Global data sets of atmospheric CO 2 concentrations, above-ground biomass (AGB), and net primary productivity (NPP) in terrestrial vegetation were assimilated into the biosphere model using an inverse modeling method combined with an atmospheric transport model. In this process, the optimal physiological parameters of the biosphere model were estimated by minimizing the misfit between observed and modeled values, and parameters were generated to characterize various biome types. Results obtained using the model with the optimized parameters correspond to the observed seasonal variations in CO 2 concentration and their annual amplitudes in both the Northern and Southern Hemispheres. In simulating the mean annual AGB and NPP, the model shows improvements in estimating the mean magnitudes and probability distributions for each biome, as compared with results obtained using prior simulation parameters. However, the model is less efficient in its simulation of AGB for forest type biomes. This misfit suggests that more accurate values of input parameters, specifically, grid mean AGB values and seasonal variabilities in physiological parameters, are required to improve the performance of the simulation model. (authors)

Use of the method of biosphere compatibility for the assessment of environmental protection methods

Science.gov (United States)

Vorobyov, Sergey

2018-01-01

The article is devoted to the question of using the indicator of biosphere compatibility for assessing the effectiveness of environmental protection methods. The indicator of biosphere compatibility was proposed by the vice-president of RAASN (Russian Academy of Architecture and Building Sciences), Doctor of Technical Sciences, Professor V.I. Ilyichev. This indicator is allows not only qualitatively but also quantitatively to assess the degree of development of urban urban areas, from the standpoint of preserving the biosphere in urban ecosystems while realizing the city’s main functions. The integral indicator of biosphere compatibility is allows us to assess not only the current ecological situation in the territory under consideration, but also to plan the forecast of its changes for building the new construction projects, or for reconstructing existing ones. The indicator of biosphere compatibility, which is a mathematical expression of the tripartite balance (technosphere, biosphere and population of this area), is allows us to quantify the degree of effectiveness of different method of protecting the environment for choose the most effective for these conditions.

Application of Biosphere Compatibility Indicator for Assessment of the Effectiveness of Environmental Protection Methods

Science.gov (United States)

Bakaeva, N. V.; Vorobyov, S. A.; Chernyaeva, I. V.

2017-11-01

The article is devoted to the issue of using the biosphere compatibility indicator to assess the effectiveness of environmental protection methods. The indicator biosphere compatibility was proposed by the vice-president of RAASN (Russian Academy of Architecture and Building Sciences), Doctor of Technical Sciences, Professor V.I. Ilyichev. This indicator allows one to assess not only qualitatively but also quantitatively the degree of urban areas development from the standpoint of preserving the biosphere in urban ecosystems while performing the city’s main functions. The integral biosphere compatibility indicator allows us to assess not only the current ecological situation in the territory under consideration but also to plan the forecast of its changes for the new construction projects implementation or for the reconstruction of the existing ones. The biosphere compatibility indicator, which is a mathematical expression of the tripartite balance (technosphere, biosphere and population of this area), allows us to quantify the effectiveness degree of different methods for environment protection to choose the most effective one under these conditions.

It's the Biosphere, Stupid!

OpenAIRE

Cairns, John

2007-01-01

The biosphere is humankind s life support system and the source of the resources that drive exponential growth. Without the biospheric life support system functioning in a way that is favorable to humans, humankind could face extinctions.

Biospheric feedback effects in a synchronously coupled model of human and Earth systems

Energy Technology Data Exchange (ETDEWEB)

Thornton, Peter E.; Calvin, Katherine V.; Jones, Andrew D.; Di Vittorio, Alan; Bond-Lamberty, Benjamin; Chini, Louise M.; Shi, Xiaoying; Mao, Jiafu; Collins, William D.; Edmonds, James A.; Thomson, Allison M.; Truesdale, John E.; Craig, Anthony P.; Branstetter, M.; Hurtt, George C.

2017-06-12

Fossil fuel combustion and land-use change are the first and second largest contributors to industrial-era increases in atmospheric carbon dioxide concentration, which is itself the largest driver of present-day climate change1. Projections of fossil fuel consumption and land-use change are thus fundamental inputs for coupled Earth system models (ESM) used to estimate the physical and biological consequences of future climate system forcing2,3. While empirical datasets are available to inform historical analyses4,5, assessments of future climate change have relied on projections of energy and land use based on energy economic models, constrained using historical and present-day data and forced with assumptions about future policy, land-use patterns, and socio-economic development trajectories6. Here we show that the influence of biospheric change – the integrated effect of climatic, ecological, and geochemical processes – on land ecosystems has a significant impact on energy, agriculture, and land-use projections for the 21st century. Such feedbacks have been ignored in previous ESM studies of future climate. We find that synchronous exposure of land ecosystem productivity in the economic system to biospheric change as it develops in an ESM results in a 10% reduction of land area used for crop cultivation; increased managed forest area and land carbon; a 15-20% decrease in global crop price; and a 17% reduction in fossil fuel emissions for a low-mid range forcing scenario7. These simulation results demonstrate that biospheric change can significantly alter primary human system forcings to the climate system. This synchronous two-way coupling approach removes inconsistencies in description of climate change between human and biosphere components of the coupled model, mitigating a major source of uncertainty identified in assessments of future climate projections8-10.

Biosphere of the earth as a life-support system (LSS) for mankind

Science.gov (United States)

Pechurkin, Nickolay

As a component of biosphere the mankind became the most powerful and active link recently. Exponential growth of human population number and of some technological indicators of its development becomes menacing for steady (stationary or close-to-stationary) functioning of biosphere as single whole. Anyway, we should be able to estimate quantitatively limits of pos-sible anthropogenic impact on functional parameters of biosphere. Considering biosphere as a natural LSS, we can receive the helpful information for working out and creation of artificial LSS of various types. Big biotic cycle induced with flows of a solar energy, is a basis of func-tioning of biosphere and its basic cells -ecosystems. In comparison with the majority natural ecosystems, the biosphere has very high factor of closure of substance circulation, especially limiting biogenic elements: nitrogen and phosphorus. Voluntarily or not, the mankind interferes in big biotic cycle and modifies it. For example, extracting mineral fertilizers for cultivation of agricultural crops, we return in circulation lost before substances, type nitric, potassic, phos-phoric salts. Burning fossils of organic carbon (oil, gas, coal), we raise concentration of carbon dioxide in atmosphere. The melting of a permafrost connected with activity of mankind, is capable to lead to excretion of other greenhouse gases, in particular, methane. It's possible to summarize briefly the main functional properties of the biosphere: Integrity, Closure, Substance cycling, Steady state, Energy dependence. These properties of the biosphere, as a LSS, ensure potentially everlasting life under the conditions of a limited quantity of substrate suitable for the life on the planet. But the selfish mankind is able to destroy harmonic adjustment of this unique natural mechanism

Biosphere II: engineering of manned, closed ecological systems.

Science.gov (United States)

Dempster, W F

1991-01-01

Space Biospheres and Ventures, a private, for-profit firm, has undertaken a major research and development project in the study of biospheres, with the objective of creating and producing biospheres. Biosphere II-scheduled for completion in March 1991-will be essentially isolated from the existing biosphere by a closed structure, composed of components derived from the existing biosphere. Like the biosphere of the Earth, Biosphere II will be essentially closed to exchanges of material or living organisms with the surrounding environment and open to energy and information exchanges. Also, like the biosphere of the Earth, Biosphere II will contain five kingdoms of life, a variety of ecosystems, plus humankind, culture, and technics. The system is designed to be complex, stable and evolving throughout its intended 100-year lifespan, rather than static. Biosphere II will cover approximately 1.3 hectare and contain 200,000 m3 in volume, with seven major biomes: tropical rainforest, tropical savannah, marsh, marine, desert, intensive agriculture, and human habitat. An interdisciplinary team of leading scientific, ecological, management, architectural, and engineering consultants have been contracted by Space Biospheres Ventures for the project. Potential applications for biospheric systems include scientific and ecological management research, refuges for endangered species, and life habitats for manned stations on spacecraft or other planets.

Earth's early biosphere

Science.gov (United States)

Des Marais, D. J.

1998-01-01

Understanding our own early biosphere is essential to our search for life elsewhere, because life arose on Earth very early and rocky planets shared similar early histories. The biosphere arose before 3.8 Ga ago, was exclusively unicellular and was dominated by hyperthermophiles that utilized chemical sources of energy and employed a range of metabolic pathways for CO2 assimilation. Photosynthesis also arose very early. Oxygenic photosynthesis arose later but still prior to 2.7 Ga. The transition toward the modern global environment was paced by a decline in volcanic and hydrothermal activity. These developments allowed atmospheric O2 levels to increase. The O2 increase created new niches for aerobic life, most notably the more advanced Eukarya that eventually spawned the megascopic fauna and flora of our modern biosphere.

Probabilistic biosphere modeling for the long-term safety assessment of geological disposal facilities for radioactive waste using first- and second-order Monte Carlo simulation.

Science.gov (United States)

Ciecior, Willy; Röhlig, Klaus-Jürgen; Kirchner, Gerald

2018-10-01

In the present paper, deterministic as well as first- and second-order probabilistic biosphere modeling approaches are compared. Furthermore, the sensitivity of the influence of the probability distribution function shape (empirical distribution functions and fitted lognormal probability functions) representing the aleatory uncertainty (also called variability) of a radioecological model parameter as well as the role of interacting parameters are studied. Differences in the shape of the output distributions for the biosphere dose conversion factor from first-order Monte Carlo uncertainty analysis using empirical and fitted lognormal distribution functions for input parameters suggest that a lognormal approximation is possibly not always an adequate representation of the aleatory uncertainty of a radioecological parameter. Concerning the comparison of the impact of aleatory and epistemic parameter uncertainty on the biosphere dose conversion factor, the latter here is described using uncertain moments (mean, variance) while the distribution itself represents the aleatory uncertainty of the parameter. From the results obtained, the solution space of second-order Monte Carlo simulation is much larger than that from first-order Monte Carlo simulation. Therefore, the influence of epistemic uncertainty of a radioecological parameter on the output result is much larger than that one caused by its aleatory uncertainty. Parameter interactions are only of significant influence in the upper percentiles of the distribution of results as well as only in the region of the upper percentiles of the model parameters. Copyright © 2018 Elsevier Ltd. All rights reserved.

Anthropogenic transformation of the terrestrial biosphere.

Science.gov (United States)

Ellis, Erle C

2011-03-13

Human populations and their use of land have transformed most of the terrestrial biosphere into anthropogenic biomes (anthromes), causing a variety of novel ecological patterns and processes to emerge. To assess whether human populations and their use of land have directly altered the terrestrial biosphere sufficiently to indicate that the Earth system has entered a new geological epoch, spatially explicit global estimates of human populations and their use of land were analysed across the Holocene for their potential to induce irreversible novel transformation of the terrestrial biosphere. Human alteration of the terrestrial biosphere has been significant for more than 8000 years. However, only in the past century has the majority of the terrestrial biosphere been transformed into intensively used anthromes with predominantly novel anthropogenic ecological processes. At present, even were human populations to decline substantially or use of land become far more efficient, the current global extent, duration, type and intensity of human transformation of ecosystems have already irreversibly altered the terrestrial biosphere at levels sufficient to leave an unambiguous geological record differing substantially from that of the Holocene or any prior epoch. It remains to be seen whether the anthropogenic biosphere will be sustained and continue to evolve.

The Biosphere International Peer Review

International Nuclear Information System (INIS)

Van Luik, Abraham

2002-01-01

Abe van Luik (US DOE- YM, USA), ended the presentation by giving feedback from the IAEA peer review on the biosphere modelling strategy developed by the DOE Yucca Mountain Site Characterisation Office (YMSCO). This review was based on available international standards and guidance. The peer review team was constituted of both experts from regulatory and waste management organisations and national advisory committees. The implementation of the review consisted of an examination of biosphere reports mainly regarding the modelling and question and answer exchanges. The final report was submitted in April 2000. It contained twenty-three recommendations within two broad classifications; one concerning the regulatory framework, the other one regarding the framework to increase stakeholders' confidence in modelling. The three main categories of recommendations were outlined, namely (i) the DOE' s Biosphere assessment Approach, (ii) the definition of the biosphere system, and (iii) the model development, data and results. Regarding in particular the treatment of the uncertainties in the biosphere, it was viewed as a key issue during the review and thus it will be re-evaluated in the future performance assessment. The summary highlighted most of the recommendations received are to be acted on, and are to be included in the License Application plan for biosphere modelling

Biosphere modeling for HLW disposal in Japan

International Nuclear Information System (INIS)

Naito, Morimasa

2001-01-01

Concept of Reference Biosphere is defined by 'the set of assumptions and hypotheses that is necessary to provide a consistent basis for calculations of the radiological impact arising from long-term releases of repository-derived radionuclides into the biosphere'. Geological environment and biosphere interface (GBI) is the place having the high probability of introduction of radioactive nuclides to biosphere by groundwater. Reference biosphere methodology, GBI, basic models, assessment context, assumptions concerning the surface environment for the biosphere assessment, nuclides migration process, interaction matrix showing radionuclide transport pathways for biosphere modeling, conceptual model for exposure modes and pathways for each exposure group in the biosphere assessment are explained. Response of the biosphere assessment model is steady, unit flux input (1 Bq/y) of different nuclides (farming exposure group). The dose per unit input of agriculture group is 1 to 3 figures larger than that of other two fisheries groups in the case of river and coastal environment except Po-210. We can calculate easily the dose by determining the dose conversion factors derived from different GBI models. Comparison of flux to dose conversion factors derived from different GBI models is effective to know the properties of each model, process and importance of data. (S.Y.)

"Biospheric medicine" as viewed from the two-year first closure of Biosphere 2.

Science.gov (United States)

Walford, R L; Bechtel, R; MacCallum, T; Paglia, D E; Weber, L J

1996-07-01

Biosphere 2 is a 3.15-acre, 7-million ft. enclosed ecological space near Tucson, AZ. It contains five wilderness and two domestic biomes (rain forest, savanna, desert, ocean, marsh; agricultural station, living quarters), an original introduction of 3,800 species (approximately 20% extinctions have occurred), and a large basement "technosphere." Sealed inside Biosphere 2 in September 1991, four women and four men, including two of the authors, maintained themselves and the various systems for 2 yr, the longest-sustained "isolated confined environment" period on record. MMPI psychological profile scores for Biosphere 2 crewmembers correlated closely with those reported for astronauts and shuttle applicants. Major medical problems encountered during the 2 yr included adaptation to a low-calorie (1800-2200 kcal.d-1 per person) but otherwise nutritionally adequate diet, with substantial weight loss (18% for men, 10% for women), and a declining oxygen atmosphere (down to 14.2%). Life in a miniworld such as Biosphere 2 may differ substantially from life in a space station or temporary planetary base. These differences include multiple, shifting, sometimes opposing post-launch objectives; complete self-sustenance with recycling of virtually all materials within a highly complex biologic system; retooling of some areas of practical medicine; an attention to "culture" as a social dynamic and how that may influence crew and leadership selection in a societal rather than a quasi-military community. Assuming that long-term planetary colonies must be largely self-sustaining (due to costs of supply over great distances), they must of necessity approach the condition of biospheres. Subject to chaos dynamic (nonlinear dynamic) perturbations, the behavior of complex biospheres will be inherently non-predictable--as opposed to the linear dynamic situation of most space missions--and will require of the inhabitants, including the medical team, a wide range of coping abilities. Under

Biosphere2 and Earthbuzz

Science.gov (United States)

Washburne, J. C.

2009-12-01

In an attempt to reach a broader audience, Biosphere 2, near Tucson, AZ, is participating in a network of science centers thanks to new funding through the Science Museum of Minnesota (SMM) and the National Center for Earth System Dynamics (NCED). Each of these centers will be tied together through an Earthbuzz kiosk, basically a networked web site that allows visitors to learn more about the work of leading local scientists in a very personal and captivating format. Content is currently being developed by Biosphere 2 researchers, staff, and graduate students that range from a public question and answer forum called “Scientist on the Spot” to science blogs by Biosphere 2 Fellows. It is hoped that this project will help educate the public about the Anthropocene, that is, the current geologic period that is so greatly affected by humankind’s impact on the health of the planet. Biosphere 2 provides a unique location to engage the public in this conversation for several reasons. First, no other destination on Earth gives the public such a physical immersion into what climate change might mean as does Biosphere 2. On the regular walking tour, visitors are guided through scaled down versions of an African savannah, a semi-arid thorn scrub, a coastal fog desert and a tropical rainforest. Digital displays of temperature and humidity confirm what your body is feeling - conditions ranging from desert aridity to tropical humidity. As one passes through the biomes of Biosphere 2, climate change is a whole body experience. Second, Biosphere 2 is also an active ecological research site - part of a unique network of sites run by the University of Arizona that allow scientists to study ecosystem processes across a range of scales - from microscopic root studies to studies encompassing large watersheds. In particular, a group of researchers is studying why large stands of pinion-juniper forests across the southwest have died in recent years. Biosphere2’s role in this

Assessing the Importance of Prior Biospheric Fluxes on Inverse Model Estimates of CO2

Science.gov (United States)

Philip, S.; Johnson, M. S.; Potter, C. S.; Genovese, V. B.

2017-12-01

Atmospheric mixing ratios of carbon dioxide (CO2) are largely controlled by anthropogenic emissions and biospheric sources/sinks. The processes controlling terrestrial biosphere-atmosphere carbon exchange are currently not fully understood, resulting in models having significant differences in the quantification of biospheric CO2 fluxes. Currently, atmospheric chemical transport models (CTM) and global climate models (GCM) use multiple different biospheric CO2 flux models resulting in large differences in simulating the global carbon cycle. The Orbiting Carbon Observatory 2 (OCO-2) satellite mission was designed to allow for the improved understanding of the processes involved in the exchange of carbon between terrestrial ecosystems and the atmosphere, and therefore allowing for more accurate assessment of the seasonal/inter-annual variability of CO2. OCO-2 provides much-needed CO2 observations in data-limited regions allowing for the evaluation of model simulations of greenhouse gases (GHG) and facilitating global/regional estimates of "top-down" CO2 fluxes. We conduct a 4-D Variation (4D-Var) data assimilation with the GEOS-Chem (Goddard Earth Observation System-Chemistry) CTM using 1) OCO-2 land nadir and land glint retrievals and 2) global in situ surface flask observations to constrain biospheric CO2 fluxes. We apply different state-of-the-science year-specific CO2 flux models (e.g., NASA-CASA (NASA-Carnegie Ames Stanford Approach), CASA-GFED (Global Fire Emissions Database), Simple Biosphere Model version 4 (SiB-4), and LPJ (Lund-Postdam-Jena)) to assess the impact of "a priori" flux predictions to "a posteriori" estimates. We will present the "top-down" CO2 flux estimates for the year 2015 using OCO-2 and in situ observations, and a complete indirect evaluation of the a priori and a posteriori flux estimates using independent in situ observations. We will also present our assessment of the variability of "top-down" CO2 flux estimates when using different

Disruptive Event Biosphere Dose Conversion Factor Analysis

Energy Technology Data Exchange (ETDEWEB)

M. Wasiolek

2004-09-08

This analysis report is one of the technical reports containing documentation of the Environmental Radiation Model for Yucca Mountain, Nevada (ERMYN), a biosphere model supporting the total system performance assessment (TSPA) for the license application (LA) for the Yucca Mountain repository. This analysis report describes the development of biosphere dose conversion factors (BDCFs) for the volcanic ash exposure scenario, and the development of dose factors for calculating inhalation dose during volcanic eruption. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1-1. This figure shows the interrelationships among the products (i.e., analysis and model reports) developed for biosphere modeling and provides an understanding of how this analysis report contributes to biosphere modeling. This report is one of two reports that develop biosphere BDCFs, which are input parameters for the TSPA model. The ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) describes in detail the ERMYN conceptual model and mathematical model. The input parameter reports, shown to the right of the Biosphere Model Report in Figure 1-1, contain detailed descriptions of the model input parameters, their development and the relationship between the parameters and specific features, events and processes (FEPs). This report describes biosphere model calculations and their output, the BDCFs, for the volcanic ash exposure scenario. This analysis receives direct input from the outputs of the ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) and from the five analyses that develop parameter values for the biosphere model (BSC 2004 [DIRS 169671]; BSC 2004 [DIRS 169672]; BSC 2004 [DIRS 169673]; BSC 2004 [DIRS 169458]; and BSC 2004 [DIRS 169459]). The results of this report are further analyzed in the ''Biosphere Dose Conversion Factor Importance and Sensitivity Analysis''. The objective of this

Disruptive Event Biosphere Dose Conversion Factor Analysis

International Nuclear Information System (INIS)

M. Wasiolek

2004-01-01

This analysis report is one of the technical reports containing documentation of the Environmental Radiation Model for Yucca Mountain, Nevada (ERMYN), a biosphere model supporting the total system performance assessment (TSPA) for the license application (LA) for the Yucca Mountain repository. This analysis report describes the development of biosphere dose conversion factors (BDCFs) for the volcanic ash exposure scenario, and the development of dose factors for calculating inhalation dose during volcanic eruption. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1-1. This figure shows the interrelationships among the products (i.e., analysis and model reports) developed for biosphere modeling and provides an understanding of how this analysis report contributes to biosphere modeling. This report is one of two reports that develop biosphere BDCFs, which are input parameters for the TSPA model. The ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) describes in detail the ERMYN conceptual model and mathematical model. The input parameter reports, shown to the right of the Biosphere Model Report in Figure 1-1, contain detailed descriptions of the model input parameters, their development and the relationship between the parameters and specific features, events and processes (FEPs). This report describes biosphere model calculations and their output, the BDCFs, for the volcanic ash exposure scenario. This analysis receives direct input from the outputs of the ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) and from the five analyses that develop parameter values for the biosphere model (BSC 2004 [DIRS 169671]; BSC 2004 [DIRS 169672]; BSC 2004 [DIRS 169673]; BSC 2004 [DIRS 169458]; and BSC 2004 [DIRS 169459]). The results of this report are further analyzed in the ''Biosphere Dose Conversion Factor Importance and Sensitivity Analysis''. The objective of this analysis was to develop the BDCFs for the volcanic ash

DISRUPTIVE EVENT BIOSPHERE DOSE CONVERSION FACTOR ANALYSIS

International Nuclear Information System (INIS)

M.A. Wasiolek

2005-01-01

This analysis report is one of the technical reports containing documentation of the Environmental Radiation Model for Yucca Mountain, Nevada (ERMYN), a biosphere model supporting the total system performance assessment (TSPA) for the license application (LA) for the Yucca Mountain repository. This analysis report describes the development of biosphere dose conversion factors (BDCFs) for the volcanic ash exposure scenario, and the development of dose factors for calculating inhalation dose during volcanic eruption. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1-1. This figure shows the interrelationships among the products (i.e., analysis and model reports) developed for biosphere modeling and provides an understanding of how this analysis report contributes to biosphere modeling. This report is one of two reports that develop biosphere BDCFs, which are input parameters for the TSPA model. The Biosphere Model Report (BSC 2004 [DIRS 169460]) describes in detail the ERMYN conceptual model and mathematical model. The input parameter reports, shown to the right of the Biosphere Model Report in Figure 1-1, contain detailed descriptions of the model input parameters, their development and the relationship between the parameters and specific features, events and processes (FEPs). This report describes biosphere model calculations and their output, the BDCFs, for the volcanic ash exposure scenario. This analysis receives direct input from the outputs of the ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) and from the five analyses that develop parameter values for the biosphere model (BSC 2005 [DIRS 172827]; BSC 2004 [DIRS 169672]; BSC 2004 [DIRS 169673]; BSC 2004 [DIRS 169458]; and BSC 2004 [DIRS 169459]). The results of this report are further analyzed in the ''Biosphere Dose Conversion Factor Importance and Sensitivity Analysis'' (Figure 1-1). The objective of this analysis was to develop the BDCFs for the volcanic

Disruptive Event Biosphere Dose Conversion Factor Analysis

Energy Technology Data Exchange (ETDEWEB)

M. A. Wasiolek

2003-07-21

This analysis report, ''Disruptive Event Biosphere Dose Conversion Factor Analysis'', is one of the technical reports containing documentation of the ERMYN (Environmental Radiation Model for Yucca Mountain Nevada) biosphere model for the geologic repository at Yucca Mountain, its input parameters, and the application of the model to perform the dose assessment for the repository. The biosphere model is one of a series of process models supporting the Total System Performance Assessment (TSPA) for the Yucca Mountain repository. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1-1. This figure shows the interrelationships among the products (i.e., analysis and model reports) developed for biosphere modeling and provides an understanding of how this analysis report contributes to biosphere modeling. This report is one of the two reports that develop biosphere dose conversion factors (BDCFs), which are input parameters for the TSPA model. The ''Biosphere Model Report'' (BSC 2003 [DIRS 164186]) describes in detail the conceptual model as well as the mathematical model and lists its input parameters. Model input parameters are developed and described in detail in five analysis report (BSC 2003 [DIRS 160964], BSC 2003 [DIRS 160965], BSC 2003 [DIRS 160976], BSC 2003 [DIRS 161239], and BSC 2003 [DIRS 161241]). The objective of this analysis was to develop the BDCFs for the volcanic ash exposure scenario and the dose factors (DFs) for calculating inhalation doses during volcanic eruption (eruption phase of the volcanic event). The volcanic ash exposure scenario is hereafter referred to as the volcanic ash scenario. For the volcanic ash scenario, the mode of radionuclide release into the biosphere is a volcanic eruption through the repository with the resulting entrainment of contaminated waste in the tephra and the subsequent atmospheric transport and dispersion of contaminated material in

Disruptive Event Biosphere Dose Conversion Factor Analysis

International Nuclear Information System (INIS)

M. A. Wasiolek

2003-01-01

This analysis report, ''Disruptive Event Biosphere Dose Conversion Factor Analysis'', is one of the technical reports containing documentation of the ERMYN (Environmental Radiation Model for Yucca Mountain Nevada) biosphere model for the geologic repository at Yucca Mountain, its input parameters, and the application of the model to perform the dose assessment for the repository. The biosphere model is one of a series of process models supporting the Total System Performance Assessment (TSPA) for the Yucca Mountain repository. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1-1. This figure shows the interrelationships among the products (i.e., analysis and model reports) developed for biosphere modeling and provides an understanding of how this analysis report contributes to biosphere modeling. This report is one of the two reports that develop biosphere dose conversion factors (BDCFs), which are input parameters for the TSPA model. The ''Biosphere Model Report'' (BSC 2003 [DIRS 164186]) describes in detail the conceptual model as well as the mathematical model and lists its input parameters. Model input parameters are developed and described in detail in five analysis report (BSC 2003 [DIRS 160964], BSC 2003 [DIRS 160965], BSC 2003 [DIRS 160976], BSC 2003 [DIRS 161239], and BSC 2003 [DIRS 161241]). The objective of this analysis was to develop the BDCFs for the volcanic ash exposure scenario and the dose factors (DFs) for calculating inhalation doses during volcanic eruption (eruption phase of the volcanic event). The volcanic ash exposure scenario is hereafter referred to as the volcanic ash scenario. For the volcanic ash scenario, the mode of radionuclide release into the biosphere is a volcanic eruption through the repository with the resulting entrainment of contaminated waste in the tephra and the subsequent atmospheric transport and dispersion of contaminated material in the biosphere. The biosphere process

Biosphere 2: a prototype project for a permanent and evolving life system for Mars base.

Science.gov (United States)

Nelson, M; Allen, J P; Dempster, W F

1992-01-01

As part of the ground-based preparation for creating long-term life systems needed for space habitation and settlement, Space Biospheres Ventures (SBV) is undertaking the Biosphere 2 project near Oracle, Arizona. Biosphere 2, currently under construction, is scheduled to commence its operations in 1991 with a two-year closure period with a crew of eight people. Biosphere 2 is a facility which will be essentialy materially-closed to exchange with the outside environment. It is open to information and energy flow. Biosphere 2 is designed to achieve a complex life-support system by the integration of seven areas or "biomes"--rainforest, savannah, desert, marsh, ocean, intensive agriculture and human habitat. Unique bioregenerative technologies, such as soil bed reactors for air purification, aquatic waste processing systems, real-time analytic systems and complex computer monitoring and control systems are being developed for the Biosphere 2 project. Its operation should afford valuable insight into the functioning of complex life systems necessary for long-term habitation in space. It will serve as an experimental ground-based prototype and testbed for the stable, permanent life systems needed for human exploration of Mars.

Modeling the global society-biosphere-climate system : Part 2: Computed scenarios

NARCIS (Netherlands)

Alcamo, J.; Van Den Born, G.J.; Bouwman, A.F.; De Haan, B.J.; Klein Goldewijk, K.; Klepper, O.; Krabec, J.; Leemans, R.; Olivier, J.G.J.; Toet, A.M.C.; De Vries, H.J.M.; Van Der Woerd, H.J.

1994-01-01

This paper presents scenarios computed with IMAGE 2.0, an integrated model of the global environment and climate change. Results are presented for selected aspects of the society-biosphere-climate system including primary energy consumption, emissions of various greenhouse gases, atmospheric

Peasant coffee in the Los Tuxtlas Biosphere Reserve, Mexico: A critical evaluation of sustainable intensification and market integration potential

Directory of Open Access Journals (Sweden)

Anne Cristina de la Vega-Leinert

2016-12-01

Full Text Available Abstract Production of low-input, shaded coffee in the Los Tuxtlas UNESCO Biosphere Reserve (LTBR, Veracruz, Mexico, an economically marginalized but ecologically rich region, was strongly affected by the collapse in international prices and the reconfiguration of the Mexican coffee sector in the 1990s. This place-based study used qualitative methods to investigate local strategies to reactivate coffee cultivation and improve market integration. Ninety-five producers, processors and cooperative representatives were interviewed to: 1 characterize the different actors in the local coffee commodity chain; 2 explore how producers, organized or not, shape and are constrained by the local coffee sector, and 3 evaluate whether producers land use strategies may be compatible with conservation in the LTBR. We combine the Land Sparing and Sharing framework with the UNESCO Biosphere Reserve zonation system to conceptualize how coffee plantations can be spatially integrated in protected areas and facilitate synergies between local livelihoods and conservation. Our empirical study illustrates the complexity and dynamism of the LTBR coffee sector. It highlights the resourcefulness of producers in adapting their cultivation systems, but also the narrow maneuvering room farmers have to exploit textbook synergies between conservation and fair trade and / or certified organic markets. In principle, coffee cultivation can be expanded and intensified without affecting remaining primary forest (Land Sparing and contribute to maintain a diverse landscape matrix in productive agroforestry systems (Land Sharing. However, few producers have the means required to successfully achieve profitable and long-term market integration. Future research on sustainable land use management in, and around, protected areas needs to explicitly address local, sectoral and market dynamics as drivers of land use at the local level. Although these dynamics may create windows of opportunity

Chapter 2. Radionuclides in the biosphere

International Nuclear Information System (INIS)

Toelgyessy, J.; Harangozo, M.

2000-01-01

This is a chapter of textbook of radioecology for university students. In this chapter authors deal with role of radionuclides in the biosphere. Chapter consists of next parts: (1) Natural radionuclides in biosphere; (2) Man-made radionuclides in the biosphere; (3) Ecologically important radionuclides; (4) Natural background; (5) Radiotoxicity and (6) Paths of transfer of radionuclides from the source to human

Biosphere analyses for the safety assessment SR-Site - synthesis and summary of results

Energy Technology Data Exchange (ETDEWEB)

Saetre, Peter [comp.

2010-12-15

This report summarises nearly 20 biosphere reports and gives a synthesis of the work performed within the SR-Site Biosphere project, i.e. the biosphere part of SR-Site. SR-Site Biosphere provides the main project with dose conversion factors (LDFs), given a unit release rate, for calculation of human doses under different release scenarios, and assesses if a potential release from the repository would have detrimental effects on the environment. The intention of this report is to give sufficient details for an overview of methods, results and major conclusions, with references to the biosphere reports where methods, data and results are presented and discussed in detail. The philosophy of the biosphere assessment was to make estimations of the radiological risk for humans and the environment as realistic as possible, based on the knowledge of present-day conditions at Forsmark and the past and expected future development of the site. This was achieved by using the best available knowledge, understanding and data from extensive site investigations from two sites. When sufficient information was not available, uncertainties were handled cautiously. A systematic identification and evaluation of features and processes that affect transport and accumulation of radionuclides at the site was conducted, and the results were summarised in an interaction matrix. Data and understanding from the site investigation was an integral part of this work, the interaction matrix underpinned the development of the radionuclide model used in the biosphere assessment. Understanding of the marine, lake and river and terrestrial ecosystems at the site was summarized in a conceptual model, and relevant features and process have been characterized to capture site specific parameter values. Detailed investigations of the structure and history of the regolith at the site and simulations of regolith dynamics were used to describe the present day state at Forsmark and the expected development of

Analysis specifications for the CC3 biosphere model BIOTRAC

International Nuclear Information System (INIS)

Szekely, J.G.; Wojciechowski, L.C.; Stephens, M.E.; Halliday, H.A.

1994-12-01

AECL Research is assessing a concept for disposing of Canada's nuclear fuel waste in a vault deep in plutonic rock of the Canadian Shield. A computer program called the Systems Variability Analysis Code (SYVAC) has been developed as an analytical tool for the postclosure (long-term) assessment of the concept. SYVAC3, the third generation of the code, is an executive program that directs repeated simulation of the disposal system to take into account parameter variation. For the postclosure assessment, the system model, CC3 (Canadian Concept, generation 3), was developed to describe a hypothetical disposal system that includes a disposal vault, the local geosphere and the biosphere in the vicinity of any discharge zones. BIOTRAC (BIOsphere TRansport And Consequences) is the biosphere model in the CC3 system model. The specifications for BIOTRAC, which were developed over a period of seven years, were subjected to numerous walkthrough examinations by the Biosphere Model Working Group to ensure that the intent of the model developers would be correctly specified for transformation into FORTRAN code. The FORTRAN version of BIOTRAC was written from interim versions of these specifications. Improvements to the code are based on revised versions of these specifications. The specifications consist of a data dictionary; sets of synopses, data flow diagrams and mini specs for the component models of BIOTRAC (surface water, soil, atmosphere, and food chain and dose); and supporting calculations (interface to the geosphere, consequences, and mass balance). (author). 20 refs., tabs., figs

Biomedical program at Space Biospheres Ventures

Science.gov (United States)

Walford, Roy

1990-01-01

There are many similarities and some important differences between potential health problems of Biosphere 2 and those of which might be anticipated for a space station or a major outpost on Mars. The demands of time, expense, and equipment would not readily allow medical evacuation from deep space for a serious illness or major trauma, whereas personnel can easily be evacuated from Biosphere 2 if necessary. Treatment facilities can be somewhat less inclusive, since distance would not compel the undertaking of heroic measures or highly complicated surgical procedures on site, and with personnel not fully trained for these procedures. The similarities are given between medical requirements of Biosphere 2 and the complex closed ecological systems of biospheres in space or on Mars. The major problems common to all these would seem to be trauma, infection, and toxicity. It is planned that minor and moderate degrees of trauma, including debridement and suturing of wounds, x ray study of fractures, will be done within Biosphere 2. Bacteriologic and fungal infections, and possibly allergies to pollen or spores are expected to be the commonest medical problem within Biosphere 2.

Work in support of biosphere assessments for solid radioactive waste disposal. 2. biosphere FEP list and biosphere modelling

Energy Technology Data Exchange (ETDEWEB)

Egan, M J; Maul, P R; Watkins, B M; Venter, A [QuantiSci Ltd., Henley-on-Thames (United Kingdom)

2001-10-01

In order to assist SSI in its reappraisal of the SFR safety case, QuantiSci has been appointed to develop a systematic framework within which to conduct the review of SKB's post-closure performance assessment (PA). The biosphere FEP list presented here was developed for use as reference material in conducting the review. SSI wishes to develop an independent PA capability for a time-dependent biosphere in preparation for the examination of the revised SFR safety case. This report documents the model development that has been undertaken by QuantiSci using the Amber computer code.

Work in support of biosphere assessments for solid radioactive waste disposal. 2. biosphere FEP list and biosphere modelling

International Nuclear Information System (INIS)

Egan, M.J.; Maul, P.R.; Watkins, B.M.; Venter, A.

2001-10-01

In order to assist SSI in its reappraisal of the SFR safety case, QuantiSci has been appointed to develop a systematic framework within which to conduct the review of SKB's post-closure performance assessment (PA). The biosphere FEP list presented here was developed for use as reference material in conducting the review. SSI wishes to develop an independent PA capability for a time-dependent biosphere in preparation for the examination of the revised SFR safety case. This report documents the model development that has been undertaken by QuantiSci using the Amber computer code

Multi-model analysis of terrestrial carbon cycles in Japan: reducing uncertainties in model outputs among different terrestrial biosphere models using flux observations

Science.gov (United States)

Ichii, K.; Suzuki, T.; Kato, T.; Ito, A.; Hajima, T.; Ueyama, M.; Sasai, T.; Hirata, R.; Saigusa, N.; Ohtani, Y.; Takagi, K.

2009-08-01

Terrestrial biosphere models show large uncertainties when simulating carbon and water cycles, and reducing these uncertainties is a priority for developing more accurate estimates of both terrestrial ecosystem statuses and future climate changes. To reduce uncertainties and improve the understanding of these carbon budgets, we investigated the ability of flux datasets to improve model simulations and reduce variabilities among multi-model outputs of terrestrial biosphere models in Japan. Using 9 terrestrial biosphere models (Support Vector Machine-based regressions, TOPS, CASA, VISIT, Biome-BGC, DAYCENT, SEIB, LPJ, and TRIFFID), we conducted two simulations: (1) point simulations at four flux sites in Japan and (2) spatial simulations for Japan with a default model (based on original settings) and an improved model (based on calibration using flux observations). Generally, models using default model settings showed large deviations in model outputs from observation with large model-by-model variability. However, after we calibrated the model parameters using flux observations (GPP, RE and NEP), most models successfully simulated seasonal variations in the carbon cycle, with less variability among models. We also found that interannual variations in the carbon cycle are mostly consistent among models and observations. Spatial analysis also showed a large reduction in the variability among model outputs, and model calibration using flux observations significantly improved the model outputs. These results show that to reduce uncertainties among terrestrial biosphere models, we need to conduct careful validation and calibration with available flux observations. Flux observation data significantly improved terrestrial biosphere models, not only on a point scale but also on spatial scales.

Biosphere 2: The True Story.

Science.gov (United States)

O'Keeffe, Michael

1992-01-01

Discusses the history and current developments of the Biosphere 2 Project, a prototype for enclosed self-sustaining structures for space colonization built in the Arizona Desert. Biosphere 2 was created to educate and provide solutions to environmental problems and revenue from research. (MCO)

Inter-annual variability of the atmospheric carbon dioxide concentrations as simulated with global terrestrial biosphere models and an atmospheric transport model

Energy Technology Data Exchange (ETDEWEB)

Fujita, Daisuke; Saeki, Tazu; Nakazawa, Takakiyo [Tohoku Univ., Sendai (Japan). Center for Atmospheric and Oceanic Studies; Ishizawa, Misa; Maksyutov, Shamil [Inst. for Global Change Research, Yokohama (Japan). Frontier Research System for Global Change; Thornton, Peter E. [National Center for Atmospheric Research, Boulder, CO (United States). Climate and Global Dynamics Div.

2003-04-01

Seasonal and inter-annual variations of atmospheric CO{sub 2} for the period from 1961 to 1997 have been simulated using a global tracer transport model driven by a new version of the Biome BioGeochemical Cycle model (Biome-BGC). Biome-BGC was forced by daily temperature and precipitation from the NCEP reanalysis dataset, and the calculated monthly-averaged CO{sub 2} fluxes were used as input to the global transport model. Results from an inter-comparison with the Carnegie-Ames-Stanford Approach model (CASA) and the Simulation model of Carbon CYCLE in Land Ecosystems (Sim-CYCLE) model are also reported. The phase of the seasonal cycle in the Northern Hemisphere was reproduced generally well by Biome-BGC, although the amplitude was smaller compared to the observations and to the other biosphere models. The CO{sub 2} time series simulated by Biome-BGC were compared to the global CO{sub 2} concentration anomalies from the observations at Mauna Loa and the South Pole. The modeled concentration anomalies matched the phase of the inter-annual variations in the atmospheric CO{sub 2} observations; however, the modeled amplitude was lower than the observed value in several cases. The result suggests that a significant part of the inter-annual variability in the global carbon cycle can be accounted for by the terrestrial biosphere models. Simulations performed with another climate-based model, Sim-CYCLE, produced a larger amplitude of inter-annual variability in atmospheric CO{sub 2}, making the amplitude closer to the observed range, but with a more visible phase mismatch in a number of time periods. This may indicate the need to increase the Biome-BGC model sensitivity to seasonal and inter-annual changes in temperature and precipitation.

Inter-annual variability of the atmospheric carbon dioxide concentrations as simulated with global terrestrial biosphere models and an atmospheric transport model

International Nuclear Information System (INIS)

Fujita, Daisuke; Saeki, Tazu; Nakazawa, Takakiyo; Ishizawa, Misa; Maksyutov, Shamil; Thornton, Peter E.

2003-01-01

Seasonal and inter-annual variations of atmospheric CO 2 for the period from 1961 to 1997 have been simulated using a global tracer transport model driven by a new version of the Biome BioGeochemical Cycle model (Biome-BGC). Biome-BGC was forced by daily temperature and precipitation from the NCEP reanalysis dataset, and the calculated monthly-averaged CO 2 fluxes were used as input to the global transport model. Results from an inter-comparison with the Carnegie-Ames-Stanford Approach model (CASA) and the Simulation model of Carbon CYCLE in Land Ecosystems (Sim-CYCLE) model are also reported. The phase of the seasonal cycle in the Northern Hemisphere was reproduced generally well by Biome-BGC, although the amplitude was smaller compared to the observations and to the other biosphere models. The CO 2 time series simulated by Biome-BGC were compared to the global CO 2 concentration anomalies from the observations at Mauna Loa and the South Pole. The modeled concentration anomalies matched the phase of the inter-annual variations in the atmospheric CO 2 observations; however, the modeled amplitude was lower than the observed value in several cases. The result suggests that a significant part of the inter-annual variability in the global carbon cycle can be accounted for by the terrestrial biosphere models. Simulations performed with another climate-based model, Sim-CYCLE, produced a larger amplitude of inter-annual variability in atmospheric CO 2 , making the amplitude closer to the observed range, but with a more visible phase mismatch in a number of time periods. This may indicate the need to increase the Biome-BGC model sensitivity to seasonal and inter-annual changes in temperature and precipitation

The water cycle in closed ecological systems: Perspectives from the Biosphere 2 and Laboratory Biosphere systems

Science.gov (United States)

Nelson, Mark; Dempster, W. F.; Allen, J. P.

2009-12-01

To achieve sustainable, healthy closed ecological systems requires solutions to challenges of closing the water cycle - recycling wastewater/irrigation water/soil medium leachate and evaporated water and supplying water of required quality as needed for different needs within the facility. Engineering Biosphere 2, the first multi-biome closed ecological system within a total airtight footprint of 12,700 m 2 with a combined volume of 200,000 m 3 with a total water capacity of some 6 × 10 6 L of water was especially challenging because it included human inhabitants, their agricultural and technical systems, as well as five analogue ecosystems ranging from rainforest to desert, freshwater ecologies to saltwater systems like mangrove and mini-ocean coral reef ecosystems. By contrast, the Laboratory Biosphere - a small (40 m 3 volume) soil-based plant growth facility with a footprint of 15 m 2 - is a very simplified system, but with similar challenges re salinity management and provision of water quality suitable for plant growth. In Biosphere 2, water needs included supplying potable water for people and domestic animals, irrigation water for a wide variety of food crops, and recycling and recovering soil nutrients from wastewater. In the wilderness biomes, providing adequately low salinity freshwater terrestrial ecosystems and maintaining appropriate salinity and pH in aquatic/marine ecosystems were challenges. The largest reservoirs in Biosphere 2 were the ocean/marsh with some 4 × 10 6 L, soil with 1 to 2 × 10 6 l, primary storage tank with 0 to 8 × 10 5 L and storage tanks for condensate and soil leachate collection and mixing tanks with a capacity of 1.6 × 10 5 L to supply irrigation for farm and wilderness ecosystems. Other reservoirs were far smaller - humidity in the atmosphere (2 × 10 3 L), streams in the rainforest and savannah, and seasonal pools in the desert were orders of magnitude smaller (8 × 10 4 L). Key technologies included condensation from

Environmental Transport Input Parameters for the Biosphere Model

International Nuclear Information System (INIS)

M. Wasiolek

2004-01-01

This analysis report is one of the technical reports documenting the Environmental Radiation Model for Yucca Mountain, Nevada (ERMYN), a biosphere model supporting the total system performance assessment for the license application (TSPA-LA) for the geologic repository at Yucca Mountain. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1-1. This figure shows relationships among the reports developed for biosphere modeling and biosphere abstraction products for the TSPA-LA, as identified in the ''Technical Work Plan for Biosphere Modeling and Expert Support'' (BSC 2004 [DIRS 169573]) (TWP). This figure provides an understanding of how this report contributes to biosphere modeling in support of the license application (LA). This report is one of the five reports that develop input parameter values for the biosphere model. The ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) describes the conceptual model and the mathematical model. The input parameter reports, shown to the right of the Biosphere Model Report in Figure 1-1, contain detailed description of the model input parameters. The output of this report is used as direct input in the ''Nominal Performance Biosphere Dose Conversion Factor Analysis'' and in the ''Disruptive Event Biosphere Dose Conversion Factor Analysis'' that calculate the values of biosphere dose conversion factors (BDCFs) for the groundwater and volcanic ash exposure scenarios, respectively. The purpose of this analysis was to develop biosphere model parameter values related to radionuclide transport and accumulation in the environment. These parameters support calculations of radionuclide concentrations in the environmental media (e.g., soil, crops, animal products, and air) resulting from a given radionuclide concentration at the source of contamination (i.e., either in groundwater or in volcanic ash). The analysis was performed in accordance with the TWP (BSC 2004 [DIRS 169573])

Environmental Transport Input Parameters for the Biosphere Model

Energy Technology Data Exchange (ETDEWEB)

M. Wasiolek

2004-09-10

This analysis report is one of the technical reports documenting the Environmental Radiation Model for Yucca Mountain, Nevada (ERMYN), a biosphere model supporting the total system performance assessment for the license application (TSPA-LA) for the geologic repository at Yucca Mountain. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1-1. This figure shows relationships among the reports developed for biosphere modeling and biosphere abstraction products for the TSPA-LA, as identified in the ''Technical Work Plan for Biosphere Modeling and Expert Support'' (BSC 2004 [DIRS 169573]) (TWP). This figure provides an understanding of how this report contributes to biosphere modeling in support of the license application (LA). This report is one of the five reports that develop input parameter values for the biosphere model. The ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) describes the conceptual model and the mathematical model. The input parameter reports, shown to the right of the Biosphere Model Report in Figure 1-1, contain detailed description of the model input parameters. The output of this report is used as direct input in the ''Nominal Performance Biosphere Dose Conversion Factor Analysis'' and in the ''Disruptive Event Biosphere Dose Conversion Factor Analysis'' that calculate the values of biosphere dose conversion factors (BDCFs) for the groundwater and volcanic ash exposure scenarios, respectively. The purpose of this analysis was to develop biosphere model parameter values related to radionuclide transport and accumulation in the environment. These parameters support calculations of radionuclide concentrations in the environmental media (e.g., soil, crops, animal products, and air) resulting from a given radionuclide concentration at the source of contamination (i.e., either in groundwater or in volcanic ash). The analysis

Biosphere analyses for the safety assessment SR-Site - synthesis and summary of results

International Nuclear Information System (INIS)

Saetre, Peter

2010-12-01

This report summarises nearly 20 biosphere reports and gives a synthesis of the work performed within the SR-Site Biosphere project, i.e. the biosphere part of SR-Site. SR-Site Biosphere provides the main project with dose conversion factors (LDFs), given a unit release rate, for calculation of human doses under different release scenarios, and assesses if a potential release from the repository would have detrimental effects on the environment. The intention of this report is to give sufficient details for an overview of methods, results and major conclusions, with references to the biosphere reports where methods, data and results are presented and discussed in detail. The philosophy of the biosphere assessment was to make estimations of the radiological risk for humans and the environment as realistic as possible, based on the knowledge of present-day conditions at Forsmark and the past and expected future development of the site. This was achieved by using the best available knowledge, understanding and data from extensive site investigations from two sites. When sufficient information was not available, uncertainties were handled cautiously. A systematic identification and evaluation of features and processes that affect transport and accumulation of radionuclides at the site was conducted, and the results were summarised in an interaction matrix. Data and understanding from the site investigation was an integral part of this work, the interaction matrix underpinned the development of the radionuclide model used in the biosphere assessment. Understanding of the marine, lake and river and terrestrial ecosystems at the site was summarized in a conceptual model, and relevant features and process have been characterized to capture site specific parameter values. Detailed investigations of the structure and history of the regolith at the site and simulations of regolith dynamics were used to describe the present day state at Forsmark and the expected development of

Characteristics of the Receptor for the Biosphere Model

International Nuclear Information System (INIS)

Wasiolek, M.A.; Rautenstrauch, K.R.

2003-01-01

This analysis report is one of the technical reports containing documentation of the Environmental Radiation Model for Yucca Mountain Nevada (ERMYN), a biosphere model supporting the Total System Performance Assessment (TSPA) for the geologic repository at Yucca Mountain. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1-1. This figure shows relationships among the products (i.e., analysis and model reports) developed for biosphere modeling and biosphere abstraction products for TSPA, as identified in the ''Technical Work Plan: for Biosphere Modeling and Expert Support'' (TWP) (BSC 2003). Some documents identified in Figure 1-1 may be under development and not available at the time this report is issued. This figure is included to provide an understanding of how this analysis report contributes to biosphere modeling in support of the license application, and access to the listed documents is not required to understand the contents of this report. This report is one of the reports that develop input parameter values for the biosphere model. The ''Biosphere Model Report'' (BSC 2003), describes the conceptual model as well as the mathematical model and its input parameters. The purpose of this analysis report is to define values for biosphere model parameters that are related to the dietary, lifestyle, and dosimetric characteristics of the receptor. The biosphere model, consistent with the licensing rule at 10 CFR Part 63, uses a hypothetical person called the reasonably maximally exposed individual (RMEI) to represent the potentially exposed population. The parameters that define the RMEI are based on the behaviors and characteristics of the Amargosa Valley population, consistent with the requirements of 10 CFR 63.312. Amargosa Valley is the community, located in the direction of the projected groundwater flow path, where most of the farming in the area occurs. The parameter values developed in this report support the

Work in support of biosphere assessments for solid radioactive waste disposal. 2. biosphere FEP list and biosphere modelling

Energy Technology Data Exchange (ETDEWEB)

Egan, M.J.; Maul, P.R.; Watkins, B.M.; Venter, A. [QuantiSci Ltd., Henley-on-Thames (United Kingdom)

2001-10-01

In order to assist SSI in its reappraisal of the SFR safety case, QuantiSci has been appointed to develop a systematic framework within which to conduct the review of SKB's post-closure performance assessment (PA). The biosphere FEP list presented here was developed for use as reference material in conducting the review. SSI wishes to develop an independent PA capability for a time-dependent biosphere in preparation for the examination of the revised SFR safety case. This report documents the model development that has been undertaken by QuantiSci using the Amber computer code.

The biomass theme 1 project: Reference biospheres

International Nuclear Information System (INIS)

Crossland, I.; Torres-Vidal, C.

2000-01-01

The long-term safety of a facility for the disposal of long-lived radioactive waste would principally depend upon a combination of engineered and natural barriers which would ensure that the radioactivity was prevented from reaching the biosphere. To assess radiological safety over extended timescales requires the construction of 'assessment biospheres'. A possibility is the development of 'Reference Biospheres', a series of stylised, internationally-agreed assessment biospheres that could be used to support post-closure assessments in a wide variety of situations. Current activities in this subject area are described. (author)

Exploring frontiers of the deep biosphere through scientific ocean drilling

Science.gov (United States)

Inagaki, F.; D'Hondt, S.; Hinrichs, K. U.

2015-12-01

Since the first deep biosphere-dedicated Ocean Drilling Program (ODP) Leg 201 using the US drill ship JOIDES Resolution in 2002, scientific ocean drilling has offered unique opportunities to expand our knowledge of the nature and extent of the deep biosphere. The latest estimate of the global subseafloor microbial biomass is ~1029cells, accounting for 4 Gt of carbon and ~1% of the Earth's total living biomass. The subseafloor microbial communities are evolutionarily diverse and their metabolic rates are extraordinarily slow. Nevertheless, accumulating activity most likely plays a significant role in elemental cycles over geological time. In 2010, during Integrated Ocean Drilling Program (IODP) Expedition 329, the JOIDES Resolutionexplored the deep biosphere in the open-ocean South Pacific Gyre—the largest oligotrophic province on our planet. During Expedition 329, relatively high concentrations of dissolved oxygen and significantly low biomass of microbial populations were observed in the entire sediment column, indicating that (i) there is no limit to life in open-ocean sediment and (ii) a significant amount of oxygen reaches through the sediment to the upper oceanic crust. This "deep aerobic biosphere" inhabits the sediment throughout up to ~37 percent of the world's oceans. The remaining ~63 percent of the oceans is comprised of higher productivity areas that contain the "deep anaerobic biosphere". In 2012, during IODP Expedition 337, the Japanese drill ship Chikyu explored coal-bearing sediments down to 2,466 meters below the seafloor off the Shimokita Peninsula, Japan. Geochemical and microbiological analyses consistently showed the occurrence of methane-producing communities associated with the coal beds. Cell concentrations in deep sediments were notably lower than those expected from the global regression line, implying that the bottom of the deep biosphere is approached in these beds. Taxonomic composition of the deep coal-bearing communities profoundly

Inhalation Exposure Input Parameters for the Biosphere Model

Energy Technology Data Exchange (ETDEWEB)

K. Rautenstrauch

2004-09-10

This analysis is one of 10 reports that support the Environmental Radiation Model for Yucca Mountain, Nevada (ERMYN) biosphere model. The ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) describes in detail the conceptual model as well as the mathematical model and its input parameters. This report documents development of input parameters for the biosphere model that are related to atmospheric mass loading and supports the use of the model to develop biosphere dose conversion factors (BDCFs). The biosphere model is one of a series of process models supporting the total system performance assessment (TSPA) for a Yucca Mountain repository. Inhalation Exposure Input Parameters for the Biosphere Model is one of five reports that develop input parameters for the biosphere model. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1-1. This figure shows the interrelationships among the products (i.e., analysis and model reports) developed for biosphere modeling, and the plan for development of the biosphere abstraction products for TSPA, as identified in the Technical Work Plan for Biosphere Modeling and Expert Support (BSC 2004 [DIRS 169573]). This analysis report defines and justifies values of mass loading for the biosphere model. Mass loading is the total mass concentration of resuspended particles (e.g., dust, ash) in a volume of air. Mass loading values are used in the air submodel of ERMYN to calculate concentrations of radionuclides in air inhaled by a receptor and concentrations in air surrounding crops. Concentrations in air to which the receptor is exposed are then used in the inhalation submodel to calculate the dose contribution to the receptor from inhalation of contaminated airborne particles. Concentrations in air surrounding plants are used in the plant submodel to calculate the concentrations of radionuclides in foodstuffs contributed from uptake by foliar interception.

Inhalation Exposure Input Parameters for the Biosphere Model

International Nuclear Information System (INIS)

K. Rautenstrauch

2004-01-01

This analysis is one of 10 reports that support the Environmental Radiation Model for Yucca Mountain, Nevada (ERMYN) biosphere model. The ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) describes in detail the conceptual model as well as the mathematical model and its input parameters. This report documents development of input parameters for the biosphere model that are related to atmospheric mass loading and supports the use of the model to develop biosphere dose conversion factors (BDCFs). The biosphere model is one of a series of process models supporting the total system performance assessment (TSPA) for a Yucca Mountain repository. Inhalation Exposure Input Parameters for the Biosphere Model is one of five reports that develop input parameters for the biosphere model. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1-1. This figure shows the interrelationships among the products (i.e., analysis and model reports) developed for biosphere modeling, and the plan for development of the biosphere abstraction products for TSPA, as identified in the Technical Work Plan for Biosphere Modeling and Expert Support (BSC 2004 [DIRS 169573]). This analysis report defines and justifies values of mass loading for the biosphere model. Mass loading is the total mass concentration of resuspended particles (e.g., dust, ash) in a volume of air. Mass loading values are used in the air submodel of ERMYN to calculate concentrations of radionuclides in air inhaled by a receptor and concentrations in air surrounding crops. Concentrations in air to which the receptor is exposed are then used in the inhalation submodel to calculate the dose contribution to the receptor from inhalation of contaminated airborne particles. Concentrations in air surrounding plants are used in the plant submodel to calculate the concentrations of radionuclides in foodstuffs contributed from uptake by foliar interception

Inhalation Exposure Input Parameters for the Biosphere Model

Energy Technology Data Exchange (ETDEWEB)

M. Wasiolek

2006-06-05

This analysis is one of the technical reports that support the Environmental Radiation Model for Yucca Mountain, Nevada (ERMYN), referred to in this report as the biosphere model. ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) describes in detail the conceptual model as well as the mathematical model and its input parameters. This report documents development of input parameters for the biosphere model that are related to atmospheric mass loading and supports the use of the model to develop biosphere dose conversion factors (BDCFs). The biosphere model is one of a series of process models supporting the total system performance assessment (TSPA) for a Yucca Mountain repository. ''Inhalation Exposure Input Parameters for the Biosphere Model'' is one of five reports that develop input parameters for the biosphere model. A graphical representation of the documentation hierarchy for the biosphere model is presented in Figure 1-1 (based on BSC 2006 [DIRS 176938]). This figure shows the interrelationships among the products (i.e., analysis and model reports) developed for biosphere modeling and how this analysis report contributes to biosphere modeling. This analysis report defines and justifies values of atmospheric mass loading for the biosphere model. Mass loading is the total mass concentration of resuspended particles (e.g., dust, ash) in a volume of air. Mass loading values are used in the air submodel of the biosphere model to calculate concentrations of radionuclides in air inhaled by a receptor and concentrations in air surrounding crops. Concentrations in air to which the receptor is exposed are then used in the inhalation submodel to calculate the dose contribution to the receptor from inhalation of contaminated airborne particles. Concentrations in air surrounding plants are used in the plant submodel to calculate the concentrations of radionuclides in foodstuffs contributed from uptake by foliar interception. This

Inhalation Exposure Input Parameters for the Biosphere Model

International Nuclear Information System (INIS)

M. Wasiolek

2006-01-01

This analysis is one of the technical reports that support the Environmental Radiation Model for Yucca Mountain, Nevada (ERMYN), referred to in this report as the biosphere model. ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) describes in detail the conceptual model as well as the mathematical model and its input parameters. This report documents development of input parameters for the biosphere model that are related to atmospheric mass loading and supports the use of the model to develop biosphere dose conversion factors (BDCFs). The biosphere model is one of a series of process models supporting the total system performance assessment (TSPA) for a Yucca Mountain repository. ''Inhalation Exposure Input Parameters for the Biosphere Model'' is one of five reports that develop input parameters for the biosphere model. A graphical representation of the documentation hierarchy for the biosphere model is presented in Figure 1-1 (based on BSC 2006 [DIRS 176938]). This figure shows the interrelationships among the products (i.e., analysis and model reports) developed for biosphere modeling and how this analysis report contributes to biosphere modeling. This analysis report defines and justifies values of atmospheric mass loading for the biosphere model. Mass loading is the total mass concentration of resuspended particles (e.g., dust, ash) in a volume of air. Mass loading values are used in the air submodel of the biosphere model to calculate concentrations of radionuclides in air inhaled by a receptor and concentrations in air surrounding crops. Concentrations in air to which the receptor is exposed are then used in the inhalation submodel to calculate the dose contribution to the receptor from inhalation of contaminated airborne particles. Concentrations in air surrounding plants are used in the plant submodel to calculate the concentrations of radionuclides in foodstuffs contributed from uptake by foliar interception. This report is concerned primarily with the

Characteristics of the Receptor for the Biosphere Model

Energy Technology Data Exchange (ETDEWEB)

M.A. Wasiolek; K.R. Rautenstrauch

2003-06-27

This analysis report is one of the technical reports containing documentation of the Environmental Radiation Model for Yucca Mountain Nevada (ERMYN), a biosphere model supporting the Total System Performance Assessment (TSPA) for the geologic repository at Yucca Mountain. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1-1. This figure shows relationships among the products (i.e., analysis and model reports) developed for biosphere modeling and biosphere abstraction products for TSPA, as identified in the ''Technical Work Plan: for Biosphere Modeling and Expert Support'' (TWP) (BSC 2003). Some documents identified in Figure 1-1 may be under development and not available at the time this report is issued. This figure is included to provide an understanding of how this analysis report contributes to biosphere modeling in support of the license application, and access to the listed documents is not required to understand the contents of this report. This report is one of the reports that develop input parameter values for the biosphere model. The ''Biosphere Model Report'' (BSC 2003), describes the conceptual model as well as the mathematical model and its input parameters. The purpose of this analysis report is to define values for biosphere model parameters that are related to the dietary, lifestyle, and dosimetric characteristics of the receptor. The biosphere model, consistent with the licensing rule at 10 CFR Part 63, uses a hypothetical person called the reasonably maximally exposed individual (RMEI) to represent the potentially exposed population. The parameters that define the RMEI are based on the behaviors and characteristics of the Amargosa Valley population, consistent with the requirements of 10 CFR 63.312. Amargosa Valley is the community, located in the direction of the projected groundwater flow path, where most of the farming in the area occurs. The parameter values

Biosphere models for deep waste disposal

International Nuclear Information System (INIS)

Olyslaegers, G.

2005-01-01

The management of the radioactive waste requires the implementation of disposal systems that ensure an adequate degree of isolation of the radioactivity from man and the environment. Because there are still a lot of uncertainties and a lack of consensus with respect to the importance of the exposure pathways of man, a project BioMoSA (Biosphere Models for Safety Assessment) was elaborated in the Fifth Framework Programme of EURATOM). It aimed at improving the scientific basis for the application of biosphere models in the framework of long-term safety studies for radioactive waste disposal facilities. The section radiological evaluations of SCK-CEN took part in the BioMoSA project. n the BioMoSA project, the reference biosphere methodology developed in the IAEA programme BIOMASS (Biosphere Modelling and Assessment methods) is implemented). We used this methodology in order to increase the transparency of biosphere modelling; t evaluate the importance of the different radionuclides and pathways, and to enhance public confidence in the assessment of potential radiological dose to population groups far into the future. Five European locations, covering a wide range of environmental and agricultural conditions are described and characterised. Each participant developed a specific biosphere model for their site. In order to achieve a consistency in this model derivation, a staged approach has been followed. Successively the biosphere is described and conceptual, mathematical and numerical models are constructed. For each of the locations site-specific parameters are selected. In the project, we had the specific task to make a comparison between the model results generated by the different participants. Results from these studies are presented and discussed

Transport of radionuclides in the biosphere

International Nuclear Information System (INIS)

Bundi, A.

1983-10-01

The dispersion of radionuclides in the biosphere and their uptake by man via various nutritional pathways is studied using a compartment model. The sample environment is the area of the lower Limmat and Aare valleys. General considerations of the compartmental description of the biosphere are made. The problem of the description of surface features, in particular soil, sediment and water, is studied in detail using the code BIOPATH. This study is intended to be an example of how a model of the biosphere could be constructed. It is shown that this is a reasonable model to calculate the spreading of radionuclides in the biosphere and that it indicates the relative significance of individual compartments, pathways and radionuclides. Calculated values of dose committment, however, should not be used as reference data for safety analyses. (Auth.)

Biosphere 2: A prototype project for a permanent and evolving life system for Mars base

Science.gov (United States)

Nelson, Mark; Allen, John P.; Dempster, William F.

As part of the ground-based preparation for creating long-term life systems needed for space habitation and settlement, Space Biopsheres Ventures (SBV) is undertaking the Biosphere 2 project near Oracle, Arizona. Biosphere 2, currently under construction, is scheduled to commence its operations in 1991 with a two-year closure period with a crew of eight people. Biosphere 2 is a facility which will be essentially materially-closed to exchange with the outside environment. It is open to information and energy flow. Biosphere 2 is designed to achieve a complex life-support system by the integration of seven areas or ``biomes'' - rainforest, savannah, desert, marsh, ocean, intensive agriculture and human habitat. Unique bioregenerative technologies, such as soil bed reactors for air purification, aquatic waste processing systems, real-time analytic systems and complex computer monitoring and control systems are being developed for the Biosphere 2 project. Its operation should afford valuable insight into the functioning of complex life systems necessary for long-term habitation in space. It will serve as an experimental ground-based prototype and testbed for the stable, permanent life systems needed for human exploration of Mars.

Lignocellulose deconstruction in the biosphere

Energy Technology Data Exchange (ETDEWEB)

Bomble, Yannick J.; Lin, Chien-Yuan; Amore, Antonella; Wei, Hui; Holwerda, Evert K.; Ciesielski, Peter N.; Donohoe, Bryon S.; Decker, Stephen R.; Lynd, Lee R.; Himmel, Michael E.

2017-12-01

Microorganisms have evolved different and yet complementary mechanisms to degrade biomass in the biosphere. The chemical biology of lignocellulose deconstruction is a complex and intricate process that appears to vary in response to specific ecosystems. These microorganisms rely on simple to complex arrangements of glycoside hydrolases to conduct most of these polysaccharide depolymerization reactions and also, as discovered more recently, oxidative mechanisms via lytic polysaccharide monooxygenases or non-enzymatic Fenton reactions which are used to enhance deconstruction. It is now clear that these deconstruction mechanisms are often more efficient in the presence of the microorganisms. In general, a major fraction of the total plant biomass deconstruction in the biosphere results from the action of various microorganisms, primarily aerobic bacteria and fungi, as well as a variety of anaerobic bacteria. Beyond carbon recycling, specialized microorganisms interact with plants to manage nitrogen in the biosphere. Understanding the interplay between these organisms within or across ecosystems is crucial to further our grasp of chemical recycling in the biosphere and also enables optimization of the burgeoning plant-based bioeconomy.

Lignocellulose deconstruction in the biosphere.

Science.gov (United States)

Bomble, Yannick J; Lin, Chien-Yuan; Amore, Antonella; Wei, Hui; Holwerda, Evert K; Ciesielski, Peter N; Donohoe, Bryon S; Decker, Stephen R; Lynd, Lee R; Himmel, Michael E

2017-12-01

Microorganisms have evolved different and yet complementary mechanisms to degrade biomass in the biosphere. The chemical biology of lignocellulose deconstruction is a complex and intricate process that appears to vary in response to specific ecosystems. These microorganisms rely on simple to complex arrangements of glycoside hydrolases to conduct most of these polysaccharide depolymerization reactions and also, as discovered more recently, oxidative mechanisms via lytic polysaccharide monooxygenases or non-enzymatic Fenton reactions which are used to enhance deconstruction. It is now clear that these deconstruction mechanisms are often more efficient in the presence of the microorganisms. In general, a major fraction of the total plant biomass deconstruction in the biosphere results from the action of various microorganisms, primarily aerobic bacteria and fungi, as well as a variety of anaerobic bacteria. Beyond carbon recycling, specialized microorganisms interact with plants to manage nitrogen in the biosphere. Understanding the interplay between these organisms within or across ecosystems is crucial to further our grasp of chemical recycling in the biosphere and also enables optimization of the burgeoning plant-based bioeconomy. Copyright © 2017. Published by Elsevier Ltd.

The Biosphere: A Decadal Vision

Science.gov (United States)

Peterson, David L.; Curran, Paul J.; Mlynzcak, Marty; Miller, Richard

2003-01-01

This paper focuses on biosphere-climate interactions including the influences of human activities. Recognizing this is only one aspect of biospheric processes, this places an emphasis of those biogeochemical processes that have a profound effect on numerous other aspects of the biosphere and the services it provides, services which are critical to sustaining life on Earth. And, the paper will focus on the various scientific aspects of assessing the availability of fresh water, including its sensitivity to climate variance and land use changes. Finally, this paper hopes to emphasize the potential role that greatly expanded space observations and interactive modeling can play in developing our understanding of Earth and its the living systems.

Nominal Performance Biosphere Dose Conversion Factor Analysis

International Nuclear Information System (INIS)

M.A. Wasiolek

2005-01-01

This analysis report is one of the technical reports containing documentation of the Environmental Radiation Model for Yucca Mountain, Nevada (ERMYN), a biosphere model supporting the Total System Performance Assessment (TSPA) for the license application (LA) for the Yucca Mountain repository. This analysis report describes the development of biosphere dose conversion factors (BDCFs) for the groundwater exposure scenario, and the development of conversion factors for assessing compliance with the groundwater protection standards. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1-1. This figure shows the interrelationships among the products (i.e., analysis and model reports) developed for biosphere modeling and provides an understanding of how this analysis report contributes to biosphere modeling. This report is one of two reports that develop BDCFs, which are input parameters for the TSPA-LA model. The ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) describes in detail the ERMYN conceptual model and mathematical model. The input parameter reports, shown to the right of the ''Biosphere Model Report'' in Figure 1-1, contain detailed description of the model input parameters, their development, and the relationship between the parameters and specific features events and processes (FEPs). This report describes biosphere model calculations and their output, the BDCFs, for the groundwater exposure scenario. This analysis receives direct input from the outputs of the ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) and the five analyses that develop parameter values for the biosphere model (BSC 2005 [DIRS 172827]; BSC 2004 [DIRS 169672]; BSC 2004 [DIRS 169673]; BSC 2004 [DIRS 169458]; BSC 2004 [DIRS 169459]). The results of this report are further analyzed in the ''Biosphere Dose Conversion Factor Importance and Sensitivity Analysis'' (Figure 1-1). The objectives of this analysis are to develop BDCFs for the

Characteristics of the Receptor for the Biosphere Model

International Nuclear Information System (INIS)

M. Wasiolek; K. Rautenstrauch

2004-01-01

This analysis report is one of a series of technical reports that document the Environmental Radiation Model for Yucca Mountain, Nevada (ERMYN), a biosphere model supporting the total system performance assessment (TSPA) for the geologic repository at Yucca Mountain. This report is one of the five biosphere reports that develop input parameter values for the biosphere model. The ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) describes the conceptual model, as well as the mathematical model and its input parameters. Figure 1-1 is a graphical representation of the documentation hierarchy for the ERMYN. This figure shows relationships among the products (i.e., scientific analyses and model reports) developed for biosphere modeling and biosphere abstraction products for TSPA, as identified in the ''Technical Work Plan: for Biosphere Modeling and Expert Support'' (BSC 2004 [DIRS 169573]). The purpose of this analysis report is to define values for biosphere model parameters that are related to the dietary, lifestyle, and dosimetric characteristics of the receptor. The biosphere model, consistent with the licensing rule at 10 CFR Part 63 [DIRS 156605], uses a hypothetical person called the reasonably maximally exposed individual (RMEI) to represent the potentially exposed population. The parameters that define the RMEI are based on the behaviors and characteristics of the residents of the unincorporated town of Amargosa Valley, consistent with the requirements of 10 CFR 63.312 [DIRS 156605]. The output of this report is used as direct input in the two analyses identified in Figure 1-1 that calculate the values of biosphere dose conversion factors (BDCFs) for the groundwater and volcanic ash exposure scenarios. The parameter values developed in this report are reflected in the TSPA through the BDCFs. The analysis was performed in accordance with AP-SIII.9Q, ''Scientific Analyses'', and the technical work plan (BSC 2004 [DIRS 169573])

The landscape-scale radionuclide transport model used in Posiva biosphere assessment 2012

Energy Technology Data Exchange (ETDEWEB)

Broed, R. [Facilia A (Finland); Hjerpe, T. [Facilia AB (Finland); Ikonen, A.T.K. [Environmental Research and Assessment EnviroCase, Ltd. (Finland)

2014-07-01

Construction of a deep geological repository for spent nuclear fuel in the Olkiluoto Island on the south-western coast of Finland is under preparation. This work presents the reference landscape-scale model for radionuclide fate and transport in the biosphere that was implemented as a part of the safety case underpinning the nuclear construction license of the repository in 2012. The model was implemented with a large number of biosphere objects, covering any radiologically significant areas of the site and downstream locations, in order to account for the uncertainty in the geosphere release location. One important factor considered is the effect of land uplift, which has the consequence that the modelled landscape evolves with time, i.e. new land areas is continuously emerging from the sea and by overgrowth of lakes, and the modelled biosphere objects can change their biotope and composition over time. For example, a biosphere object that initially represents a part of the coast, can due to the land uplift eventually represent a lake. This lake might then at a later stage have dried up and formed a wetland that eventually is turned into a cropland. This means that the ecosystem-specific model parts used in one biosphere object, the related model parameters, and the available exposure pathways vary with time. A time-period of 10,000 years is simulated, with the assumption that a single spent fuel disposal canister initially fails its containment functions. The resulting activity concentrations in the environmental media that are produced by the simulation with the landscape model are used to estimate the doses to members of the public and dose-rates to non-human biota inhabiting the modelled region. In this work the focus is on the reference case model which represents a defective canister in a deposition hole that is cautiously selected, leading to geosphere releases just north of the current northern shoreline, but also a brief overview of two alternative models

Viral infections as controlling factors for the deep biosphere? (Invited)

Science.gov (United States)

Engelen, B.; Engelhardt, T.; Sahlberg, M.; Cypionka, H.

2009-12-01

The marine deep biosphere represents the largest biotope on Earth. Throughout the last years, we have obtained interesting insights into its microbial community composition. However, one component that was completely overlooked so far is the viral inventory of deep-subsurface sediments. While viral infections were identified to have a major impact on the benthic microflora of deep-sea surface sediments (Danavaro et al. 2008), no studies were performed on deep-biosphere samples, so far. As grazers probably play only a minor role in anoxic and highly compressed deep sediments, viruses might be the main “predators” for indigenous microorganisms. Furthermore, the release of cell components, called “the viral shunt”, could have a major impact on the deep biosphere in providing labile organic compounds to non-infected microorganisms in these generally nutrient depleted sediments. However, direct counting of viruses in sediments is highly challenging due to the small size of viruses and the high background of small particles. Even molecular surveys using “universal” PCR primers that target phage-specific genes fail due to the vast phage diversity. One solution for this problem is the lysogenic viral life cycle as many bacteriophages integrate their DNA into the host genome. It is estimated that up to 70% of cultivated bacteria contain prophages within their genome. Therefore, culture collections (Batzke et al. 2007) represent an archive of the viral composition within the respective habitat. These prophages can be induced to become free phage particles in stimulation experiments in which the host cells are set under certain stress situations such as a treatment with UV exposure or DNA-damaging antibiotics. The study of the viral component within the deep biosphere offers to answer the following questions: To which extent are deep-biosphere populations controlled by viral infections? What is the inter- and intra-specific diversity and the host-specific viral

Environmental Transport Input Parameters for the Biosphere Model

Energy Technology Data Exchange (ETDEWEB)

M. A. Wasiolek

2003-06-27

This analysis report is one of the technical reports documenting the Environmental Radiation Model for Yucca Mountain Nevada (ERMYN), a biosphere model supporting the total system performance assessment (TSPA) for the geologic repository at Yucca Mountain. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1-1. This figure shows relationships among the reports developed for biosphere modeling and biosphere abstraction products for the TSPA, as identified in the ''Technical Work Plan: for Biosphere Modeling and Expert Support'' (TWP) (BSC 2003 [163602]). Some documents in Figure 1-1 may be under development and not available when this report is issued. This figure provides an understanding of how this report contributes to biosphere modeling in support of the license application (LA), but access to the listed documents is not required to understand the contents of this report. This report is one of the reports that develops input parameter values for the biosphere model. The ''Biosphere Model Report'' (BSC 2003 [160699]) describes the conceptual model, the mathematical model, and the input parameters. The purpose of this analysis is to develop biosphere model parameter values related to radionuclide transport and accumulation in the environment. These parameters support calculations of radionuclide concentrations in the environmental media (e.g., soil, crops, animal products, and air) resulting from a given radionuclide concentration at the source of contamination (i.e., either in groundwater or volcanic ash). The analysis was performed in accordance with the TWP (BSC 2003 [163602]). This analysis develops values of parameters associated with many features, events, and processes (FEPs) applicable to the reference biosphere (DTN: M00303SEPFEPS2.000 [162452]), which are addressed in the biosphere model (BSC 2003 [160699]). The treatment of these FEPs is described in BSC (2003 [160699

Environmental Transport Input Parameters for the Biosphere Model

International Nuclear Information System (INIS)

Wasiolek, M. A.

2003-01-01

This analysis report is one of the technical reports documenting the Environmental Radiation Model for Yucca Mountain Nevada (ERMYN), a biosphere model supporting the total system performance assessment (TSPA) for the geologic repository at Yucca Mountain. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1-1. This figure shows relationships among the reports developed for biosphere modeling and biosphere abstraction products for the TSPA, as identified in the ''Technical Work Plan: for Biosphere Modeling and Expert Support'' (TWP) (BSC 2003 [163602]). Some documents in Figure 1-1 may be under development and not available when this report is issued. This figure provides an understanding of how this report contributes to biosphere modeling in support of the license application (LA), but access to the listed documents is not required to understand the contents of this report. This report is one of the reports that develops input parameter values for the biosphere model. The ''Biosphere Model Report'' (BSC 2003 [160699]) describes the conceptual model, the mathematical model, and the input parameters. The purpose of this analysis is to develop biosphere model parameter values related to radionuclide transport and accumulation in the environment. These parameters support calculations of radionuclide concentrations in the environmental media (e.g., soil, crops, animal products, and air) resulting from a given radionuclide concentration at the source of contamination (i.e., either in groundwater or volcanic ash). The analysis was performed in accordance with the TWP (BSC 2003 [163602]). This analysis develops values of parameters associated with many features, events, and processes (FEPs) applicable to the reference biosphere (DTN: M00303SEPFEPS2.000 [162452]), which are addressed in the biosphere model (BSC 2003 [160699]). The treatment of these FEPs is described in BSC (2003 [160699], Section 6.2). Parameter values

Nominal Performance Biosphere Dose Conversion Factor Analysis

Energy Technology Data Exchange (ETDEWEB)

M.A. Wasiolek

2005-04-28

This analysis report is one of the technical reports containing documentation of the Environmental Radiation Model for Yucca Mountain, Nevada (ERMYN), a biosphere model supporting the Total System Performance Assessment (TSPA) for the license application (LA) for the Yucca Mountain repository. This analysis report describes the development of biosphere dose conversion factors (BDCFs) for the groundwater exposure scenario, and the development of conversion factors for assessing compliance with the groundwater protection standards. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1-1. This figure shows the interrelationships among the products (i.e., analysis and model reports) developed for biosphere modeling and provides an understanding of how this analysis report contributes to biosphere modeling. This report is one of two reports that develop BDCFs, which are input parameters for the TSPA-LA model. The ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) describes in detail the ERMYN conceptual model and mathematical model. The input parameter reports, shown to the right of the ''Biosphere Model Report'' in Figure 1-1, contain detailed description of the model input parameters, their development, and the relationship between the parameters and specific features events and processes (FEPs). This report describes biosphere model calculations and their output, the BDCFs, for the groundwater exposure scenario. This analysis receives direct input from the outputs of the ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) and the five analyses that develop parameter values for the biosphere model (BSC 2005 [DIRS 172827]; BSC 2004 [DIRS 169672]; BSC 2004 [DIRS 169673]; BSC 2004 [DIRS 169458]; BSC 2004 [DIRS 169459]). The results of this report are further analyzed in the ''Biosphere Dose Conversion Factor Importance and Sensitivity Analysis

Inhalation Exposure Input Parameters for the Biosphere Model

International Nuclear Information System (INIS)

M. A. Wasiolek

2003-01-01

This analysis is one of the nine reports that support the Environmental Radiation Model for Yucca Mountain Nevada (ERMYN) biosphere model. The ''Biosphere Model Report'' (BSC 2003a) describes in detail the conceptual model as well as the mathematical model and its input parameters. This report documents a set of input parameters for the biosphere model, and supports the use of the model to develop biosphere dose conversion factors (BDCFs). The biosphere model is one of a series of process models supporting the Total System Performance Assessment (TSPA) for a Yucca Mountain repository. This report, ''Inhalation Exposure Input Parameters for the Biosphere Model'', is one of the five reports that develop input parameters for the biosphere model. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1-1. This figure shows the interrelationships among the products (i.e., analysis and model reports) developed for biosphere modeling, and the plan for development of the biosphere abstraction products for TSPA, as identified in the ''Technical Work Plan: for Biosphere Modeling and Expert Support'' (BSC 2003b). It should be noted that some documents identified in Figure 1-1 may be under development at the time this report is issued and therefore not available at that time. This figure is included to provide an understanding of how this analysis report contributes to biosphere modeling in support of the license application, and is not intended to imply that access to the listed documents is required to understand the contents of this analysis report. This analysis report defines and justifies values of mass loading, which is the total mass concentration of resuspended particles (e.g., dust, ash) in a volume of air. Measurements of mass loading are used in the air submodel of ERMYN to calculate concentrations of radionuclides in air surrounding crops and concentrations in air inhaled by a receptor. Concentrations in air to which the

Characteristics of the Receptor for the Biosphere Model

International Nuclear Information System (INIS)

M.A. Wasiolek

2005-01-01

This analysis report is one of a series of technical reports that document the Environmental Radiation Model for Yucca Mountain, Nevada (ERMYN), a biosphere model supporting the total system performance assessment (TSPA) for the geologic repository at Yucca Mountain. This report is one of the five biosphere reports that develop input parameter values for the biosphere model. The ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) describes the conceptual model, as well as the mathematical model and its input parameters. Figure 1-1 is a graphical representation of the documentation hierarchy for the ERMYN. This figure shows relationships among the products (i.e., scientific analyses and model reports) developed for biosphere modeling and biosphere abstraction products for TSPA, as identified in the ''Technical Work Plan for Biosphere Modeling and Expert Support'' (BSC 2005 [DIRS 172782]). The purpose of this analysis report is to define values for biosphere model parameters that are related to the dietary, lifestyle, and dosimetric characteristics of the receptor. The biosphere model, consistent with the licensing rule at 10 CFR Part 63 [DIRS 173164], uses a hypothetical person called the reasonably maximally exposed individual (RMEI) to represent the potentially exposed population. The parameters that define the RMEI are based on the behaviors and characteristics of the residents of the unincorporated town of Amargosa Valley, consistent with the requirements of 10 CFR 63.312 [DIRS 173164]. The output of this report is used as direct input in the two analyses identified in Figure 1-1 that calculate the values of biosphere dose conversion factors (BDCFs) for the groundwater and volcanic ash exposure scenarios. The parameter values developed in this report are reflected in the TSPA through the BDCFs. The analysis was performed in accordance with LP-SIII.9Q-BSC, ''Scientific Analyses'', and the technical work plan (BSC 2005 [DIRS 172782]). The scope of the revision was

Characteristics of the Receptor for the Biosphere Model

Energy Technology Data Exchange (ETDEWEB)

M. Wasiolek; K. Rautenstrauch

2004-09-09

This analysis report is one of a series of technical reports that document the Environmental Radiation Model for Yucca Mountain, Nevada (ERMYN), a biosphere model supporting the total system performance assessment (TSPA) for the geologic repository at Yucca Mountain. This report is one of the five biosphere reports that develop input parameter values for the biosphere model. The ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) describes the conceptual model, as well as the mathematical model and its input parameters. Figure 1-1 is a graphical representation of the documentation hierarchy for the ERMYN. This figure shows relationships among the products (i.e., scientific analyses and model reports) developed for biosphere modeling and biosphere abstraction products for TSPA, as identified in the ''Technical Work Plan: for Biosphere Modeling and Expert Support'' (BSC 2004 [DIRS 169573]). The purpose of this analysis report is to define values for biosphere model parameters that are related to the dietary, lifestyle, and dosimetric characteristics of the receptor. The biosphere model, consistent with the licensing rule at 10 CFR Part 63 [DIRS 156605], uses a hypothetical person called the reasonably maximally exposed individual (RMEI) to represent the potentially exposed population. The parameters that define the RMEI are based on the behaviors and characteristics of the residents of the unincorporated town of Amargosa Valley, consistent with the requirements of 10 CFR 63.312 [DIRS 156605]. The output of this report is used as direct input in the two analyses identified in Figure 1-1 that calculate the values of biosphere dose conversion factors (BDCFs) for the groundwater and volcanic ash exposure scenarios. The parameter values developed in this report are reflected in the TSPA through the BDCFs. The analysis was performed in accordance with AP-SIII.9Q, ''Scientific Analyses'', and the technical work

Interim report on reference biospheres for radioactive waste disposal

Energy Technology Data Exchange (ETDEWEB)

Dorp, F. van [NAGRA (Switzerland)] [and others

1994-10-01

Primary criteria for repository safety are commonly expressed in terms of risk or dose, and a biosphere model is required to evaluate the corresponding assessment endpoints. Even when other indicators are used to express the safety goals, a biosphere model is still needed in order to justify those indicators. In safety or performance assessments of a repository, the uncertainties in space and time for the different components of the repository system have to be considered. For the biosphere component, prediction of future human habits, in particular, is extremely uncertain. This is especially important in the assessment of deep geological disposal, which involves very long timescales, particularly for wastes containing very long lived radionuclides. Thus, the results of biosphere modelling should not be seen as predictions, but as illustrations of the consequences that may occur, should the postulated release occur today or under other conditions implied by the underlying biosphere model assumptions. Differences in biosphere modelling approaches arise because of differences in regulations, the nature of the wastes to be disposed of, disposal site characteristics, disposal concepts and purposes of the assessment. Differences in treatment of uncertainties can also arise. For example, if doses or risks are anticipated to be far below regulatory limits, assessments may be based upon simplified and, necessarily, conservative biosphere models. At present biosphere models used to assess radioactive waste disposal show significant differences in the features, events and processes (FEPs) included or excluded. In general, the reasons for these differences have not been well documented or explained. Developments in radioecology have implications for biosphere modelling for radioactive waste disposal. In particular, after the Chernobyl accident, radioecological research has been significantly increased. Results of this research are already having and will continue to have a

Interim report on reference biospheres for radioactive waste disposal

Energy Technology Data Exchange (ETDEWEB)

Dorp, F van [NAGRA (Switzerland); and others

1994-10-01

Primary criteria for repository safety are commonly expressed in terms of risk or dose, and a biosphere model is required to evaluate the corresponding assessment endpoints. Even when other indicators are used to express the safety goals, a biosphere model is still needed in order to justify those indicators. In safety or performance assessments of a repository, the uncertainties in space and time for the different components of the repository system have to be considered. For the biosphere component, prediction of future human habits, in particular, is extremely uncertain. This is especially important in the assessment of deep geological disposal, which involves very long timescales, particularly for wastes containing very long lived radionuclides. Thus, the results of biosphere modelling should not be seen as predictions, but as illustrations of the consequences that may occur, should the postulated release occur today or under other conditions implied by the underlying biosphere model assumptions. Differences in biosphere modelling approaches arise because of differences in regulations, the nature of the wastes to be disposed of, disposal site characteristics, disposal concepts and purposes of the assessment. Differences in treatment of uncertainties can also arise. For example, if doses or risks are anticipated to be far below regulatory limits, assessments may be based upon simplified and, necessarily, conservative biosphere models. At present biosphere models used to assess radioactive waste disposal show significant differences in the features, events and processes (FEPs) included or excluded. In general, the reasons for these differences have not been well documented or explained. Developments in radioecology have implications for biosphere modelling for radioactive waste disposal. In particular, after the Chernobyl accident, radioecological research has been significantly increased. Results of this research are already having and will continue to have a

Interim report on reference biospheres for radioactive waste disposal

International Nuclear Information System (INIS)

Dorp, F. van

1994-10-01

Primary criteria for repository safety are commonly expressed in terms of risk or dose, and a biosphere model is required to evaluate the corresponding assessment endpoints. Even when other indicators are used to express the safety goals, a biosphere model is still needed in order to justify those indicators. In safety or performance assessments of a repository, the uncertainties in space and time for the different components of the repository system have to be considered. For the biosphere component, prediction of future human habits, in particular, is extremely uncertain. This is especially important in the assessment of deep geological disposal, which involves very long timescales, particularly for wastes containing very long lived radionuclides. Thus, the results of biosphere modelling should not be seen as predictions, but as illustrations of the consequences that may occur, should the postulated release occur today or under other conditions implied by the underlying biosphere model assumptions. Differences in biosphere modelling approaches arise because of differences in regulations, the nature of the wastes to be disposed of, disposal site characteristics, disposal concepts and purposes of the assessment. Differences in treatment of uncertainties can also arise. For example, if doses or risks are anticipated to be far below regulatory limits, assessments may be based upon simplified and, necessarily, conservative biosphere models. At present biosphere models used to assess radioactive waste disposal show significant differences in the features, events and processes (FEPs) included or excluded. In general, the reasons for these differences have not been well documented or explained. Developments in radioecology have implications for biosphere modelling for radioactive waste disposal. In particular, after the Chernobyl accident, radioecological research has been significantly increased. Results of this research are already having and will continue to have a

The Biosphere as a Living System. On the Harmonization of Human and Biosphere Relationship

Directory of Open Access Journals (Sweden)

Alexey Yablokov

2017-02-01

Full Text Available The evolution of the biosphere has led to creation of astrophysical and telluric stable perfect system biotic regulation, which based on a high degree of closure of natural cycles. The development of human beings as bio-social, beyond the biological patterns, break these closed cycles, and dramatically broke the biotic regulation of the biosphere. As results — sustainable biosphere has become unsustainable anthroposphere. As with the origin of life physico-chemical regularities of the structure of matter turned out to be “mastered” life, as soon as with the emergence of anthroposphere physical-chemicalbiological regularities of evolution are complemented by social ones (including technology development and of the technosphere — as the essential content of anthroposphere. The result of the violation of natural biotic regulation broke a global environmental crisis that boomerang begins it is dangerous to human. It is theoretically possible to overcome this ecological crisis by the transition from the Neolithic paradigm of “nature conquest”, to the organization of “crisis management” of the biosphere (world system governance by the activity of the society restore and “repair” the damaged processes in the biosphere. This requires a new organization in all areas of human activity, i.e., a fundamentally new paradigm of human behavior on the planet. Development within the paradigm of the Neolithic culture (extensive use of natural resources, is inevitably associated with different kinds of wars in their redistribution, leads to an increasing accumulation of non-degradable waste (tertiary anthropogenic products, determines the fatal instability of anthroposphere and, therefore, unsustainable development of civilization. It is a mistake to assume that human’s dependence on nature is reduced — it takes a different form. The forces of human as an intelligence being, “recollecting himself”, about the offense with lifesupporting

Biosphere 2 test module experimentation program

Science.gov (United States)

Alling, Abigail; Leigh, Linda S.; Maccallum, Taber; Alvarez-Romo, Norberto

1990-01-01

The Biosphere 2 Test Module is a facility which has the capability to do either short or long term closures: five month closures with plants were conducted. Also conducted were investigations of specific problems, such as trace gas purification by bioregenerative systems by in-putting a fixed concentration of a gas and observing its uptake over time. In other Test Module experiments, the concentration of one gas was changed to observe what effects this has on other gases present or on the system. The science of biospherics which encompasses the study of closed biological systems provides an opening into the future in space as well as in the Earth's biosphere.

Agricultural and Environmental Input Parameters for the Biosphere Model

International Nuclear Information System (INIS)

Kaylie Rasmuson; Kurt Rautenstrauch

2003-01-01

This analysis is one of nine technical reports that support the Environmental Radiation Model for Yucca Mountain Nevada (ERMYN) biosphere model. It documents input parameters for the biosphere model, and supports the use of the model to develop Biosphere Dose Conversion Factors (BDCF). The biosphere model is one of a series of process models supporting the Total System Performance Assessment (TSPA) for the repository at Yucca Mountain. The ERMYN provides the TSPA with the capability to perform dose assessments. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1-1. This figure shows the interrelationships between the major activities and their products (the analysis and model reports) that were planned in the biosphere Technical Work Plan (TWP, BSC 2003a). It should be noted that some documents identified in Figure 1-1 may be under development and therefore not available at the time this document is issued. The ''Biosphere Model Report'' (BSC 2003b) describes the ERMYN and its input parameters. This analysis report, ANL-MGR-MD-000006, ''Agricultural and Environmental Input Parameters for the Biosphere Model'', is one of the five reports that develop input parameters for the biosphere model. This report defines and justifies values for twelve parameters required in the biosphere model. These parameters are related to use of contaminated groundwater to grow crops. The parameter values recommended in this report are used in the soil, plant, and carbon-14 submodels of the ERMYN

Nominal Performance Biosphere Dose Conversion Factor Analysis

Energy Technology Data Exchange (ETDEWEB)

M.A. Wasiolek

2003-07-25

This analysis report is one of the technical reports containing documentation of the Environmental Radiation Model for Yucca Mountain, Nevada (ERMYN), a biosphere model supporting the Total System Performance Assessment (TSPA) for the license application (LA) for the Yucca Mountain repository. This analysis report describes the development of biosphere dose conversion factors (BDCFs) for the groundwater exposure scenario, and the development of conversion factors for assessing compliance with the groundwater protection standard. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1-1. This figure shows the interrelationships among the products (i.e., analysis and model reports) developed for biosphere modeling and provides an understanding of how this analysis report contributes to biosphere modeling. This report is one of two reports that develop biosphere BDCFs, which are input parameters for the TSPA model. The ''Biosphere Model Report'' (BSC 2003 [DIRS 164186]) describes in detail the ERMYN conceptual model and mathematical model. The input parameter reports (BSC 2003 [DIRS 160964]; BSC 2003 [DIRS 160965]; BSC 2003 [DIRS 160976]; BSC 2003 [DIRS 161239]; BSC 2003 [DIRS 161241]) contain detailed description of the model input parameters. This report describes biosphere model calculations and their output, the BDCFs, for the groundwater exposure scenario. The objectives of this analysis are to develop BDCFs and conversion factors for the TSPA. The BDCFs will be used in performance assessment for calculating annual doses for a given concentration of radionuclides in groundwater. The conversion factors will be used for calculating gross alpha particle activity in groundwater and the annual dose from beta- and photon-emitting radionuclides.

Soil-related Input Parameters for the Biosphere Model

International Nuclear Information System (INIS)

A. J. Smith

2003-01-01

This analysis is one of the technical reports containing documentation of the Environmental Radiation Model for Yucca Mountain Nevada (ERMYN), a biosphere model supporting the Total System Performance Assessment (TSPA) for the geologic repository at Yucca Mountain. The biosphere model is one of a series of process models supporting the Total System Performance Assessment (TSPA) for the Yucca Mountain repository. A graphical representation of the documentation hierarchy for the ERMYN biosphere model is presented in Figure 1-1. This figure shows the interrelationships among the products (i.e., analysis and model reports) developed for biosphere modeling, and the plan for development of the biosphere abstraction products for TSPA, as identified in the ''Technical Work Plan: for Biosphere Modeling and Expert Support'' (BSC 2003 [163602]). It should be noted that some documents identified in Figure 1-1 may be under development at the time this report is issued and therefore not available. This figure is included to provide an understanding of how this analysis report contributes to biosphere modeling in support of the license application, and is not intended to imply that access to the listed documents is required to understand the contents of this report. This report, ''Soil Related Input Parameters for the Biosphere Model'', is one of the five analysis reports that develop input parameters for use in the ERMYN model. This report is the source documentation for the six biosphere parameters identified in Table 1-1. ''The Biosphere Model Report'' (BSC 2003 [160699]) describes in detail the conceptual model as well as the mathematical model and its input parameters. The purpose of this analysis was to develop the biosphere model parameters needed to evaluate doses from pathways associated with the accumulation and depletion of radionuclides in the soil. These parameters support the calculation of radionuclide concentrations in soil from on-going irrigation and ash

Nominal Performance Biosphere Dose Conversion Factor Analysis

Energy Technology Data Exchange (ETDEWEB)

M. Wasiolek

2004-09-08

This analysis report is one of the technical reports containing documentation of the Environmental Radiation Model for Yucca Mountain, Nevada (ERMYN), a biosphere model supporting the Total System Performance Assessment (TSPA) for the license application (LA) for the Yucca Mountain repository. This analysis report describes the development of biosphere dose conversion factors (BDCFs) for the groundwater exposure scenario, and the development of conversion factors for assessing compliance with the groundwater protection standard. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1-1. This figure shows the interrelationships among the products (i.e., analysis and model reports) developed for biosphere modeling and provides an understanding of how this analysis report contributes to biosphere modeling. This report is one of two reports that develop biosphere BDCFs, which are input parameters for the TSPA-LA model. The ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) describes in detail the ERMYN conceptual model and mathematical model. The input parameter reports, shown to the right of the ''Biosphere Model Report'' in Figure 1-1, contain detailed description of the model input parameters, their development, and the relationship between the parameters and specific features events and processes (FEPs). This report describes biosphere model calculations and their output, the BDCFs, for the groundwater exposure scenario. The objectives of this analysis are to develop BDCFs for the groundwater exposure scenario for the three climate states considered in the TSPA-LA as well as conversion factors for evaluating compliance with the groundwater protection standard. The BDCFs will be used in performance assessment for calculating all-pathway annual doses for a given concentration of radionuclides in groundwater. The conversion factors will be used for calculating gross alpha particle

Nominal Performance Biosphere Dose Conversion Factor Analysis

International Nuclear Information System (INIS)

M. Wasiolek

2004-01-01

This analysis report is one of the technical reports containing documentation of the Environmental Radiation Model for Yucca Mountain, Nevada (ERMYN), a biosphere model supporting the Total System Performance Assessment (TSPA) for the license application (LA) for the Yucca Mountain repository. This analysis report describes the development of biosphere dose conversion factors (BDCFs) for the groundwater exposure scenario, and the development of conversion factors for assessing compliance with the groundwater protection standard. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1-1. This figure shows the interrelationships among the products (i.e., analysis and model reports) developed for biosphere modeling and provides an understanding of how this analysis report contributes to biosphere modeling. This report is one of two reports that develop biosphere BDCFs, which are input parameters for the TSPA-LA model. The ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) describes in detail the ERMYN conceptual model and mathematical model. The input parameter reports, shown to the right of the ''Biosphere Model Report'' in Figure 1-1, contain detailed description of the model input parameters, their development, and the relationship between the parameters and specific features events and processes (FEPs). This report describes biosphere model calculations and their output, the BDCFs, for the groundwater exposure scenario. The objectives of this analysis are to develop BDCFs for the groundwater exposure scenario for the three climate states considered in the TSPA-LA as well as conversion factors for evaluating compliance with the groundwater protection standard. The BDCFs will be used in performance assessment for calculating all-pathway annual doses for a given concentration of radionuclides in groundwater. The conversion factors will be used for calculating gross alpha particle activity in groundwater and the annual dose

Biosphere modelling for the assessment of radioactive waste repositories: the development of a common basis by the BIOMOVS II working group on reference biospheres

International Nuclear Information System (INIS)

VanDorp, F.

1996-01-01

Performance criteria for radioactive waste repositories are often expressed in terms of dose or risk. The characteristics of biosphere modelling for performance assessment are that: a) potential release occurs in the distant future, b) reliable predictions of human behaviour at the time of release are impracticable, and c) the biosphere is not considered to be a barrier. For these and other reasons, many unexplained differences have arisen in the approaches to biosphere modelling. The BIOMOVS II Working Group on Reference Biospheres has developed a) a recommended methodology for biosphere model development, b) a structured electronic list of features, events and processes (FEPs), and c) an illustrative example of the recommended methodology. The Working Group has successfully tested the Interaction Matrix (or Rock Engineering Systems, RES) approach for developing conceptual models. The BIOMOVS II Working Groups on Reference Biospheres and Complementary Studies have achieved considerable harmonisation in approaches to biosphere modelling. (author)

Inhalation Exposure Input Parameters for the Biosphere Model

Energy Technology Data Exchange (ETDEWEB)

M. A. Wasiolek

2003-09-24

This analysis is one of the nine reports that support the Environmental Radiation Model for Yucca Mountain Nevada (ERMYN) biosphere model. The ''Biosphere Model Report'' (BSC 2003a) describes in detail the conceptual model as well as the mathematical model and its input parameters. This report documents a set of input parameters for the biosphere model, and supports the use of the model to develop biosphere dose conversion factors (BDCFs). The biosphere model is one of a series of process models supporting the Total System Performance Assessment (TSPA) for a Yucca Mountain repository. This report, ''Inhalation Exposure Input Parameters for the Biosphere Model'', is one of the five reports that develop input parameters for the biosphere model. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1-1. This figure shows the interrelationships among the products (i.e., analysis and model reports) developed for biosphere modeling, and the plan for development of the biosphere abstraction products for TSPA, as identified in the ''Technical Work Plan: for Biosphere Modeling and Expert Support'' (BSC 2003b). It should be noted that some documents identified in Figure 1-1 may be under development at the time this report is issued and therefore not available at that time. This figure is included to provide an understanding of how this analysis report contributes to biosphere modeling in support of the license application, and is not intended to imply that access to the listed documents is required to understand the contents of this analysis report. This analysis report defines and justifies values of mass loading, which is the total mass concentration of resuspended particles (e.g., dust, ash) in a volume of air. Measurements of mass loading are used in the air submodel of ERMYN to calculate concentrations of radionuclides in air surrounding crops and concentrations in air

Characteristics of the Receptor for the Biosphere Model

Energy Technology Data Exchange (ETDEWEB)

M.A. Wasiolek

2005-04-05

This analysis report is one of a series of technical reports that document the Environmental Radiation Model for Yucca Mountain, Nevada (ERMYN), a biosphere model supporting the total system performance assessment (TSPA) for the geologic repository at Yucca Mountain. This report is one of the five biosphere reports that develop input parameter values for the biosphere model. The ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) describes the conceptual model, as well as the mathematical model and its input parameters. Figure 1-1 is a graphical representation of the documentation hierarchy for the ERMYN. This figure shows relationships among the products (i.e., scientific analyses and model reports) developed for biosphere modeling and biosphere abstraction products for TSPA, as identified in the ''Technical Work Plan for Biosphere Modeling and Expert Support'' (BSC 2005 [DIRS 172782]). The purpose of this analysis report is to define values for biosphere model parameters that are related to the dietary, lifestyle, and dosimetric characteristics of the receptor. The biosphere model, consistent with the licensing rule at 10 CFR Part 63 [DIRS 173164], uses a hypothetical person called the reasonably maximally exposed individual (RMEI) to represent the potentially exposed population. The parameters that define the RMEI are based on the behaviors and characteristics of the residents of the unincorporated town of Amargosa Valley, consistent with the requirements of 10 CFR 63.312 [DIRS 173164]. The output of this report is used as direct input in the two analyses identified in Figure 1-1 that calculate the values of biosphere dose conversion factors (BDCFs) for the groundwater and volcanic ash exposure scenarios. The parameter values developed in this report are reflected in the TSPA through the BDCFs. The analysis was performed in accordance with LP-SIII.9Q-BSC, ''Scientific Analyses'', and the technical work

Biosphere Reserve for All: Potentials for Involving Underrepresented Age Groups in the Development of a Biosphere Reserve through Intergenerational Practice.

Science.gov (United States)

Mitrofanenko, Tamara; Snajdr, Julia; Muhar, Andreas; Penker, Marianne; Schauppenlehner-Kloyber, Elisabeth

2018-05-22

Stakeholder participation is of high importance in UNESCO biosphere reserves as model regions for sustainable development; however, certain groups remain underrepresented. The paper proposes Intergenerational Practice (IP) as a means of involving youth and elderly women and explores its options and barriers, using the example of the Salzburger Lungau and Kärntner Nockberge Biosphere Reserve in Austria. Case study analysis is used involving mixed methods. The results reveal obstacles and motivations to participating in biosphere reserve implementation and intergenerational activities for the youth and the elderly women and imply that much potential for IP exists in the biosphere reserve region. The authors propose suitable solutions from the intergenerational field to overcome identified participation obstacles and suggest benefits of incorporating IP as a management tool into biosphere reserve activities. Suggestions for future research include evaluating applications of IP in the context of protected areas, testing of methods used in other contexts, and contribution to theory development.

European-wide simulations of present cropland phenology, productivity and carbon fluxes using an improved terrestrial biosphere model

Science.gov (United States)

Smith, P. C.; Ciais, P.; de Noblet, N.; Peylin, P.; Viovy, N.; Bondeau, A.

2009-04-01

Aiming at producing improved estimates of carbon source/sink spatial and interannual patterns across Europe (35% croplands), this work combines the terrestrial biosphere model ORCHIDEE (for vegetation productivity, water balance, soil carbon dynamics) and the generic crop model STICS (for phenology, irrigation, nitrogen balance, harvest). The ORCHIDEE-STICS model, relying on three plant functional types for the representation of temperate agriculture, is evaluated over the last few decades at various spatial and temporal resolutions. The simulated Leaf Area Index seasonal cycle is largely improved relative to the original ORCHIDEE simulating grasslands, and compares favourably with remote-sensing observations (the Figure of Merit in Time doubles over Europe). Crop yield is derived from annual Net Primary Productivity and compared with wheat and grain maize harvest data for five European countries. Discrepancies between 30-year mean simulated and reported yields remain large in Mediterranean countries. Interannual variability amplitude expressed relative to the mean is reduced towards the observed variability (~10%) when using ORCHIDEE-STICS. The simulated 2003 anomalous carbon source from European ecosystems to the atmosphere due to the 2003 summer heat wave is in good agreement with atmospheric inversions (~0.2 GtC, from May to October). The anomaly is twice as large in the ORCHIDEE alone simulation, owing to the unrealistically high exposure of herbaceous plants to the extreme summer conditions. Overall, this study highlights the importance of accounting for the specific phonologies of crops sown both in winter and in spring and for irrigation applied to summer crops in regional/global models of the terrestrial carbon cycle. Limitations suggest accounting for temporal and spatial variability in agricultural practices for further simulation improvement.

Biosphere modelling for the assessment of radioactive waste repositories; the development of a common basis by the BIOMOVS II reference biospheres working group

International Nuclear Information System (INIS)

Dorp, F. van; Egan, M.; Kessler, J.H.; Nilsson, S.; Pinedo, P.; Smith, G.; Torres, C.

1998-01-01

Performance criteria for radioactive waste repositories are often expressed in terms of dose or risk. The characteristics of biosphere modelling for performance assessment are that: (a) potential release occurs in the distant future, (b) reliable predictions of human behaviour at the time of release are impracticable, and (c) the biosphere is not considered to be a barrier as the geosphere and the engineered barriers. For these and other reasons, differences have arisen in the approaches to biosphere modelling for repository dose and risk assessment. The BIOMOVS II Reference Biospheres Working Group has developed (a) a recommended methodology for biosphere model development, (b) a structured list of features, events and processes (FEPs) which the model should describe, and (c) an illustrative example of the recommended methodology. The Working Group has successfully tested the Interaction Matrix (or Rock Engineering Systems, RES) approach for developing conceptual models. The BIOMOVS II Working Groups on Reference Biospheres and Complementary Studies have laid the basis for considerable harmonisation in approaches to biosphere modelling of long term radionuclide releases. (Copyright (c) 1998 Elsevier Science B.V., Amsterdam. All rights reserved.)

Soil-Related Input Parameters for the Biosphere Model

International Nuclear Information System (INIS)

Smith, A. J.

2004-01-01

This report presents one of the analyses that support the Environmental Radiation Model for Yucca Mountain Nevada (ERMYN). The ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) describes the details of the conceptual model as well as the mathematical model and the required input parameters. The biosphere model is one of a series of process models supporting the postclosure Total System Performance Assessment (TSPA) for the Yucca Mountain repository. A schematic representation of the documentation flow for the Biosphere input to TSPA is presented in Figure 1-1. This figure shows the evolutionary relationships among the products (i.e., analysis and model reports) developed for biosphere modeling, and the biosphere abstraction products for TSPA, as identified in the ''Technical Work Plan for Biosphere Modeling and Expert Support'' (TWP) (BSC 2004 [DIRS 169573]). This figure is included to provide an understanding of how this analysis report contributes to biosphere modeling in support of the license application, and is not intended to imply that access to the listed documents is required to understand the contents of this report. This report, ''Soil-Related Input Parameters for the Biosphere Model'', is one of the five analysis reports that develop input parameters for use in the ERMYN model. This report is the source documentation for the six biosphere parameters identified in Table 1-1. The purpose of this analysis was to develop the biosphere model parameters associated with the accumulation and depletion of radionuclides in the soil. These parameters support the calculation of radionuclide concentrations in soil from on-going irrigation or ash deposition and, as a direct consequence, radionuclide concentration in other environmental media that are affected by radionuclide concentrations in soil. The analysis was performed in accordance with the TWP (BSC 2004 [DIRS 169573]) where the governing procedure was defined as AP-SIII.9Q, ''Scientific Analyses''. This

The Sword of Damocles and the Biosphere

OpenAIRE

Cairns, John

2011-01-01

The tale of the sword of Damocles can be used to describe the sword hanging by a thread over humankind with the damage it is doing to the present biosphere. The sixth biosphere, or the current biosphere, is experiencing a significant reduction in species caused by human-related activities. The signs of risk have markedly increased by the signs differ considerably from one are to another, and people tend do discount global change because it is unnoticeable in their local area. If humans begin...

Post-closure performance assessment treatment of the biosphere

Energy Technology Data Exchange (ETDEWEB)

Broderick, M A [UK Nirex Ltd., Harwell, Oxfordshire (United Kingdom); Egan, M J [AEA Technology, Risley, Cheshire (United Kingdom); Thorne, M C [Electrowatt, Horsham, Sussex (United Kingdom); Williams, J A [AEA Technology, Risley, Cheshire (United Kingdom)

1996-07-01

The Nirex strategy for radioactive waste disposal is based on a system of engineered and natural barriers, providing long-term isolation of the waste from those parts of the environment that are in contact with or readily available for use by humans (i.e. the biosphere). Even so, there remains the possibility that, on a timescale of thousands to tens of thousands of years, small quantities of poorly-sorbed, long-lived radionuclides may be released from the engineered disposal system, ultimately to emerge into the biosphere. Biosphere models are used in post-closure performance assessments to quantify the competing effects of dilution and accumulation processes on radionuclide concentrations in the accessible environment. Understanding biosphere processes and their time dependence is necessary not only to determine the radiological impact of possible future releases, but also to characterise the dynamics of transport in groundwater and the location, duration and extent of any such releases. Nirex is developing a new biosphere model for use in post-closure radiological assessments for the proposed Sellafield repository. A compartment modelling approach has been adopted, as in studies performed previously, but the system will be dynamic, allowing changes with time in both the properties of compartments and the transfers between compartments. The transport model considers both mass transport within the biosphere and the migration of radionuclides, thereby ensuring that a self-consistent description of the biosphere, in a spatially-extensive domain is maintained. The above approach is designed to link the assessment models used by the Nirex assessment team more closely into the Nirex biosphere research programme than has hitherto been possible with time-invariant assessment models. (author)

Post-closure performance assessment treatment of the biosphere

International Nuclear Information System (INIS)

Broderick, M.A.; Egan, M.J.; Thorne, M.C.; Williams, J.A.

1996-01-01

The Nirex strategy for radioactive waste disposal is based on a system of engineered and natural barriers, providing long-term isolation of the waste from those parts of the environment that are in contact with or readily available for use by humans (i.e. the biosphere). Even so, there remains the possibility that, on a timescale of thousands to tens of thousands of years, small quantities of poorly-sorbed, long-lived radionuclides may be released from the engineered disposal system, ultimately to emerge into the biosphere. Biosphere models are used in post-closure performance assessments to quantify the competing effects of dilution and accumulation processes on radionuclide concentrations in the accessible environment. Understanding biosphere processes and their time dependence is necessary not only to determine the radiological impact of possible future releases, but also to characterise the dynamics of transport in groundwater and the location, duration and extent of any such releases. Nirex is developing a new biosphere model for use in post-closure radiological assessments for the proposed Sellafield repository. A compartment modelling approach has been adopted, as in studies performed previously, but the system will be dynamic, allowing changes with time in both the properties of compartments and the transfers between compartments. The transport model considers both mass transport within the biosphere and the migration of radionuclides, thereby ensuring that a self-consistent description of the biosphere, in a spatially-extensive domain is maintained. The above approach is designed to link the assessment models used by the Nirex assessment team more closely into the Nirex biosphere research programme than has hitherto been possible with time-invariant assessment models. (author)

A Biosphere model for use in SITE-94

International Nuclear Information System (INIS)

Barrdahl, R.

1996-08-01

A simple biosphere model has been designed for use in the SKI Project SITE-94 related to a hypothetical repository for spent nuclear fuel on the island of Aespoe. The model provides results in terms of radiation dose per 1 Bq/year, unless otherwise indicated, and results will thus have to be scaled with actual flux of radionuclides per year entering the primary biosphere recipients. The model does not include radioactive decay as there is assumed no delay in the model system, except for where explicitly mentioned. Specifically, no radioactive transitions resulting in daughter nuclides are considered. Calculated yearly individual and population committed (50 years) radiation doses to man are expressed as mSv/h, under the assumption of a flux of one Bq/year into the primary biosphere recipient. Calculated radiation doses resulting from the present biosphere model are hypothetical, and should under no circumstances be considered as real. Neither should they be used as quantitative information for decision purposes. The biosphere model is of a rough and primitive character and its precision, relative to the real biosphere in the surroundings of Aespoe is envisaged to be several orders of magnitude. 8 refs

Agricultural and Environmental Input Parameters for the Biosphere Model

Energy Technology Data Exchange (ETDEWEB)

Kaylie Rasmuson; Kurt Rautenstrauch

2003-06-20

This analysis is one of nine technical reports that support the Environmental Radiation Model for Yucca Mountain Nevada (ERMYN) biosphere model. It documents input parameters for the biosphere model, and supports the use of the model to develop Biosphere Dose Conversion Factors (BDCF). The biosphere model is one of a series of process models supporting the Total System Performance Assessment (TSPA) for the repository at Yucca Mountain. The ERMYN provides the TSPA with the capability to perform dose assessments. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1-1. This figure shows the interrelationships between the major activities and their products (the analysis and model reports) that were planned in the biosphere Technical Work Plan (TWP, BSC 2003a). It should be noted that some documents identified in Figure 1-1 may be under development and therefore not available at the time this document is issued. The ''Biosphere Model Report'' (BSC 2003b) describes the ERMYN and its input parameters. This analysis report, ANL-MGR-MD-000006, ''Agricultural and Environmental Input Parameters for the Biosphere Model'', is one of the five reports that develop input parameters for the biosphere model. This report defines and justifies values for twelve parameters required in the biosphere model. These parameters are related to use of contaminated groundwater to grow crops. The parameter values recommended in this report are used in the soil, plant, and carbon-14 submodels of the ERMYN.

Turnover of microbial lipids in the deep biosphere and growth of benthic archaeal populations.

Science.gov (United States)

Xie, Sitan; Lipp, Julius S; Wegener, Gunter; Ferdelman, Timothy G; Hinrichs, Kai-Uwe

2013-04-09

Deep subseafloor sediments host a microbial biosphere with unknown impact on global biogeochemical cycles. This study tests previous evidence based on microbial intact polar lipids (IPLs) as proxies of live biomass, suggesting that Archaea dominate the marine sedimentary biosphere. We devised a sensitive radiotracer assay to measure the decay rate of ([(14)C]glucosyl)-diphytanylglyceroldiether (GlcDGD) as an analog of archaeal IPLs in continental margin sediments. The degradation kinetics were incorporated in model simulations that constrained the fossil fraction of subseafloor IPLs and rates of archaeal turnover. Simulating the top 1 km in a generic continental margin sediment column, we estimated degradation rate constants of GlcDGD being one to two orders of magnitude lower than those of bacterial IPLs, with half-lives of GlcDGD increasing with depth to 310 ky. Given estimated microbial community turnover times of 1.6-73 ky in sediments deeper than 1 m, 50-96% of archaeal IPLs represent fossil signals. Consequently, previous lipid-based estimates of global subseafloor biomass probably are too high, and the widely observed dominance of archaeal IPLs does not rule out a deep biosphere dominated by Bacteria. Reverse modeling of existing concentration profiles suggest that archaeal IPL synthesis rates decline from around 1,000 pg⋅mL(-1) sediment⋅y(-1) at the surface to 0.2 pg⋅mL(-1)⋅y(-1) at 1 km depth, equivalent to production of 7 × 10(5) to 140 archaeal cells⋅mL(-1) sediment⋅y(-1), respectively. These constraints on microbial growth are an important step toward understanding the relationship between the deep biosphere and the carbon cycle.

Sensitivity properties of a biosphere model based on BATS and a statistical-dynamical climate model

Energy Technology Data Exchange (ETDEWEB)

Zhang, T. (Yale Univ., New Haven, CT (United States))

1994-06-01

A biosphere model based on the Biosphere-Atmosphere Transfer Scheme (BATS) and the Saltzman-Vernekar (SV) statistical-dynamical climate model is developed. Some equations of BATS are adopted either intact or with modifications, some are conceptually modified, and still others are replaced with equations of the SV model. The model is designed so that it can be run independently as long as the parameters related to the physiology and physiognomy of the vegetation, the atmospheric conditions, solar radiation, and soil conditions are given. With this stand-alone biosphere model, a series of sensitivity investigations, particularly the model sensitivity to fractional area of vegetation cover, soil surface water availability, and solar radiation for different types of vegetation, were conducted as a first step. These numerical experiments indicate that the presence of a vegetation cover greatly enhances the exchanges of momentum, water vapor, and energy between the atmosphere and the surface of the earth. An interesting result is that a dense and thick vegetation cover tends to serve as an environment conditioner or, more specifically, a thermostat and a humidistat, since the soil surface temperature, foliage temperature, and temperature and vapor pressure of air within the foliage are practically insensitive to variation of soil surface water availability and even solar radiation within a wide range. An attempt is also made to simulate the gradual deterioration of environment accompanying gradual degradation of a tropical forest to grasslands. Comparison with field data shows that this model can realistically simulate the land surface processes involving biospheric variations. 46 refs., 10 figs., 6 tabs.

Causes and timing of future biosphere extinctions

Directory of Open Access Journals (Sweden)

S. Franck

2006-01-01

Full Text Available We present a minimal model for the global carbon cycle of the Earth containing the reservoirs mantle, ocean floor, continental crust, biosphere, and the kerogen, as well as the combined ocean and atmosphere reservoir. The model is specified by introducing three different types of biosphere: procaryotes, eucaryotes, and complex multicellular life. During the entire existence of the biosphere procaryotes are always present. 2 Gyr ago eucaryotic life first appears. The emergence of complex multicellular life is connected with an explosive increase in biomass and a strong decrease in Cambrian global surface temperature at about 0.54 Gyr ago. In the long-term future the three types of biosphere will die out in reverse sequence of their appearance. We show that there is no evidence for an implosion-like extinction in contrast to the Cambrian explosion. In dependence of their temperature tolerance complex multicellular life and eucaryotes become extinct in about 0.8–1.2 Gyr and 1.3–1.5 Gyr, respectively. The ultimate life span of the biosphere is defined by the extinction of procaryotes in about 1.6 Gyr.

Agricultural and Environmental Input Parameters for the Biosphere Model

Energy Technology Data Exchange (ETDEWEB)

K. Rasmuson; K. Rautenstrauch

2004-09-14

This analysis is one of 10 technical reports that support the Environmental Radiation Model for Yucca Mountain Nevada (ERMYN) (i.e., the biosphere model). It documents development of agricultural and environmental input parameters for the biosphere model, and supports the use of the model to develop biosphere dose conversion factors (BDCFs). The biosphere model is one of a series of process models supporting the total system performance assessment (TSPA) for the repository at Yucca Mountain. The ERMYN provides the TSPA with the capability to perform dose assessments. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1-1. This figure shows the interrelationships between the major activities and their products (the analysis and model reports) that were planned in ''Technical Work Plan for Biosphere Modeling and Expert Support'' (BSC 2004 [DIRS 169573]). The ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) describes the ERMYN and its input parameters.

Agricultural and Environmental Input Parameters for the Biosphere Model

International Nuclear Information System (INIS)

K. Rasmuson; K. Rautenstrauch

2004-01-01

This analysis is one of 10 technical reports that support the Environmental Radiation Model for Yucca Mountain Nevada (ERMYN) (i.e., the biosphere model). It documents development of agricultural and environmental input parameters for the biosphere model, and supports the use of the model to develop biosphere dose conversion factors (BDCFs). The biosphere model is one of a series of process models supporting the total system performance assessment (TSPA) for the repository at Yucca Mountain. The ERMYN provides the TSPA with the capability to perform dose assessments. A graphical representation of the documentation hierarchy for the ERMYN is presented in Figure 1-1. This figure shows the interrelationships between the major activities and their products (the analysis and model reports) that were planned in ''Technical Work Plan for Biosphere Modeling and Expert Support'' (BSC 2004 [DIRS 169573]). The ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) describes the ERMYN and its input parameters

Evaluation of Features, Events, and Processes (FEP) for the Biosphere Model

International Nuclear Information System (INIS)

J. J. Tappen

2003-01-01

The purpose of this revision of ''Evaluation of the Applicability of Biosphere-Related Features, Events, and Processes (FEPs)'' (BSC 2001) is to document the screening analysis of biosphere-related primary FEPs, as identified in ''The Development of Information Catalogued in REV00 of the YMP FEP Database'' (Freeze et al. 2001), in accordance with the requirements of the final U.S. Nuclear Regulatory Commission (NRC) regulations at 10 CFR Part 63. This database is referred to as the Yucca Mountain Project (YMP) FEP Database throughout this document. Those biosphere-related primary FEPs that are screened as applicable will be used to develop the conceptual model portion of the biosphere model, which will in turn be used to develop the mathematical model portion of the biosphere model. As part of this revision, any reference to the screening guidance or criteria provided either by Dyer (1999) or by the proposed NRC regulations at 64 FR 8640 has been removed. The title of this revision has been changed to more accurately reflect the purpose of the analyses. In addition, this revision will address Item Numbers 19, 20, 21, 25, and 26 from Attachment 2 of ''U.S. Nuclear Regulatory Commission/U.S. Department of Energy Technical Exchange and Management Meeting on Total System Performance Assessment and Integration (August 6 through 10, 2001)'' (Reamer 2001). This Scientific Analysis Report (SAR) does not support the current revision to the YMP FEP Database (Freeze et al. 2001). Subsequent to the release of the YMP FEP Database (Freeze et al. 2001), a series of reviews was conducted on both the FEP processes used to support Total System Performance Assessment for Site Recommendation and to develop the YMP FEP Database. In response to observations and comments from these reviews, particularly the NRC/DOE TSPA Technical Exchange in August 2001 (Reamer 2001), several Key Technical Issue (KTI) Agreements were developed. ''The Enhanced Plan for Features, Events and Processes

Evaluation of Features, Events, and Processes (FEP) for the Biosphere Model

Energy Technology Data Exchange (ETDEWEB)

J. J. Tappen

2003-02-16

The purpose of this revision of ''Evaluation of the Applicability of Biosphere-Related Features, Events, and Processes (FEPs)'' (BSC 2001) is to document the screening analysis of biosphere-related primary FEPs, as identified in ''The Development of Information Catalogued in REV00 of the YMP FEP Database'' (Freeze et al. 2001), in accordance with the requirements of the final U.S. Nuclear Regulatory Commission (NRC) regulations at 10 CFR Part 63. This database is referred to as the Yucca Mountain Project (YMP) FEP Database throughout this document. Those biosphere-related primary FEPs that are screened as applicable will be used to develop the conceptual model portion of the biosphere model, which will in turn be used to develop the mathematical model portion of the biosphere model. As part of this revision, any reference to the screening guidance or criteria provided either by Dyer (1999) or by the proposed NRC regulations at 64 FR 8640 has been removed. The title of this revision has been changed to more accurately reflect the purpose of the analyses. In addition, this revision will address Item Numbers 19, 20, 21, 25, and 26 from Attachment 2 of ''U.S. Nuclear Regulatory Commission/U.S. Department of Energy Technical Exchange and Management Meeting on Total System Performance Assessment and Integration (August 6 through 10, 2001)'' (Reamer 2001). This Scientific Analysis Report (SAR) does not support the current revision to the YMP FEP Database (Freeze et al. 2001). Subsequent to the release of the YMP FEP Database (Freeze et al. 2001), a series of reviews was conducted on both the FEP processes used to support Total System Performance Assessment for Site Recommendation and to develop the YMP FEP Database. In response to observations and comments from these reviews, particularly the NRC/DOE TSPA Technical Exchange in August 2001 (Reamer 2001), several Key Technical Issue (KTI) Agreements were developed

Soil-Related Input Parameters for the Biosphere Model

Energy Technology Data Exchange (ETDEWEB)

A. J. Smith

2004-09-09

This report presents one of the analyses that support the Environmental Radiation Model for Yucca Mountain Nevada (ERMYN). The ''Biosphere Model Report'' (BSC 2004 [DIRS 169460]) describes the details of the conceptual model as well as the mathematical model and the required input parameters. The biosphere model is one of a series of process models supporting the postclosure Total System Performance Assessment (TSPA) for the Yucca Mountain repository. A schematic representation of the documentation flow for the Biosphere input to TSPA is presented in Figure 1-1. This figure shows the evolutionary relationships among the products (i.e., analysis and model reports) developed for biosphere modeling, and the biosphere abstraction products for TSPA, as identified in the ''Technical Work Plan for Biosphere Modeling and Expert Support'' (TWP) (BSC 2004 [DIRS 169573]). This figure is included to provide an understanding of how this analysis report contributes to biosphere modeling in support of the license application, and is not intended to imply that access to the listed documents is required to understand the contents of this report. This report, ''Soil-Related Input Parameters for the Biosphere Model'', is one of the five analysis reports that develop input parameters for use in the ERMYN model. This report is the source documentation for the six biosphere parameters identified in Table 1-1. The purpose of this analysis was to develop the biosphere model parameters associated with the accumulation and depletion of radionuclides in the soil. These parameters support the calculation of radionuclide concentrations in soil from on-going irrigation or ash deposition and, as a direct consequence, radionuclide concentration in other environmental media that are affected by radionuclide concentrations in soil. The analysis was performed in accordance with the TWP (BSC 2004 [DIRS 169573]) where the governing procedure

Tensit - a novel probabilistic simulation tool for safety assessments. Tests and verifications using biosphere models

Energy Technology Data Exchange (ETDEWEB)

Jones, Jakob; Vahlund, Fredrik; Kautsky, Ulrik

2004-06-01

This report documents the verification of a new simulation tool for dose assessment put together in a package under the name Tensit (Technical Nuclide Simulation Tool). The tool is developed to solve differential equation systems describing transport and decay of radionuclides. It is capable of handling both deterministic and probabilistic simulations. The verifications undertaken shows good results. Exceptions exist only where the reference results are unclear. Tensit utilise and connects two separate commercial softwares. The equation solving capability is derived from the Matlab/Simulink software environment to which Tensit adds a library of interconnectable building blocks. Probabilistic simulations are provided through a statistical software named at{sub R}isk that communicates with Matlab/Simulink. More information about these softwares can be found at www.palisade.com and www.mathworks.com. The underlying intention of developing this new tool has been to make available a cost efficient and easy to use means for advanced dose assessment simulations. The mentioned benefits are gained both through the graphical user interface provided by Simulink and at{sub R}isk, and the use of numerical equation solving routines in Matlab. To verify Tensit's numerical correctness, an implementation was done of the biosphere modules for dose assessments used in the earlier safety assessment project SR 97. Acquired probabilistic results for deterministic as well as probabilistic simulations have been compared with documented values. Additional verification has been made both with another simulation tool named AMBER and also against the international test case from PSACOIN named Level 1B. This report documents the models used for verification with equations and parameter values so that the results can be recreated. For a background and a more detailed description of the underlying processes in the models, the reader is referred to the original references. Finally, in the

Tensit - a novel probabilistic simulation tool for safety assessments. Tests and verifications using biosphere models

International Nuclear Information System (INIS)

Jones, Jakob; Vahlund, Fredrik; Kautsky, Ulrik

2004-06-01

This report documents the verification of a new simulation tool for dose assessment put together in a package under the name Tensit (Technical Nuclide Simulation Tool). The tool is developed to solve differential equation systems describing transport and decay of radionuclides. It is capable of handling both deterministic and probabilistic simulations. The verifications undertaken shows good results. Exceptions exist only where the reference results are unclear. Tensit utilise and connects two separate commercial softwares. The equation solving capability is derived from the Matlab/Simulink software environment to which Tensit adds a library of interconnectable building blocks. Probabilistic simulations are provided through a statistical software named at R isk that communicates with Matlab/Simulink. More information about these softwares can be found at www.palisade.com and www.mathworks.com. The underlying intention of developing this new tool has been to make available a cost efficient and easy to use means for advanced dose assessment simulations. The mentioned benefits are gained both through the graphical user interface provided by Simulink and at R isk, and the use of numerical equation solving routines in Matlab. To verify Tensit's numerical correctness, an implementation was done of the biosphere modules for dose assessments used in the earlier safety assessment project SR 97. Acquired probabilistic results for deterministic as well as probabilistic simulations have been compared with documented values. Additional verification has been made both with another simulation tool named AMBER and also against the international test case from PSACOIN named Level 1B. This report documents the models used for verification with equations and parameter values so that the results can be recreated. For a background and a more detailed description of the underlying processes in the models, the reader is referred to the original references. Finally, in the perspective of

Analysis of Critical Issues in Biosphere Assessment Modelling and Site Investigation

Energy Technology Data Exchange (ETDEWEB)

Egan, M.J.; Thorne, M.C.; Little, R.H.; Pasco, R.F. [Quintessa Limited, Henley-on-Thames (United Kingdom)

2003-07-01

to the water column, which may lead to significantly higher doses than indicated by the SKB models. It is recommended that alternative groundwater discharge and system evolution models should therefore be considered in future assessments. It is also recommended that care should be taken to ensure that releases from the geosphere to the biosphere are represented in a consistent manner, based on careful integration of processes at the interface.

Analysis of Critical Issues in Biosphere Assessment Modelling and Site Investigation

International Nuclear Information System (INIS)

Egan, M.J.; Thorne, M.C.; Little, R.H.; Pasco, R.F.

2003-07-01

, which may lead to significantly higher doses than indicated by the SKB models. It is recommended that alternative groundwater discharge and system evolution models should therefore be considered in future assessments. It is also recommended that care should be taken to ensure that releases from the geosphere to the biosphere are represented in a consistent manner, based on careful integration of processes at the interface

Reconnecting to the biosphere.

Science.gov (United States)

Folke, Carl; Jansson, Asa; Rockström, Johan; Olsson, Per; Carpenter, Stephen R; Chapin, F Stuart; Crépin, Anne-Sophie; Daily, Gretchen; Danell, Kjell; Ebbesson, Jonas; Elmqvist, Thomas; Galaz, Victor; Moberg, Fredrik; Nilsson, Måns; Osterblom, Henrik; Ostrom, Elinor; Persson, Asa; Peterson, Garry; Polasky, Stephen; Steffen, Will; Walker, Brian; Westley, Frances

2011-11-01

Humanity has emerged as a major force in the operation of the biosphere, with a significant imprint on the Earth System, challenging social-ecological resilience. This new situation calls for a fundamental shift in perspectives, world views, and institutions. Human development and progress must be reconnected to the capacity of the biosphere and essential ecosystem services to be sustained. Governance challenges include a highly interconnected and faster world, cascading social-ecological interactions and planetary boundaries that create vulnerabilities but also opportunities for social-ecological change and transformation. Tipping points and thresholds highlight the importance of understanding and managing resilience. New modes of flexible governance are emerging. A central challenge is to reconnect these efforts to the changing preconditions for societal development as active stewards of the Earth System. We suggest that the Millennium Development Goals need to be reframed in such a planetary stewardship context combined with a call for a new social contract on global sustainability. The ongoing mind shift in human relations with Earth and its boundaries provides exciting opportunities for societal development in collaboration with the biosphere--a global sustainability agenda for humanity.

A model of accumulation of radionuclides in biosphere originating from groundwater contamination

International Nuclear Information System (INIS)

Gaerdenaes, Annemieke; Jansson, Per-Erik; Karlberg, Louise

2006-03-01

The objective of this study is to introduce a module in CoupModel describing the transport and accumulation in the biosphere of a radionuclide originating from a ground water contamination. Two model approaches describing the plant uptake of a radionuclide were included, namely passive and active uptake. Passive uptake means in this study that the root uptake rate of a radionuclide is governed by water uptake. Normal mechanism for the passive water uptake is the convective flux of water from the soil to the plant. An example of element taken up passively is Ca. Active plant uptake is in this model defined as the root uptake rate of a radionuclide that is governed by carbon assimilation i.e. photosynthesis and plant growth. The actively taken up element can for example be an element essential to plant, but not available in high enough concentration by passive uptake alone, like the major nutrients N and P or an element that very well resembles a plant nutrient, like Cs resembles K. Active uptake of trace element may occur alone or in addition to passive uptake. Normal mechanism for the active uptake is molecular diffusion from the soil solution to the roots or via any other organism living in symbiosis with the roots like the mycorrhiza. Also a model approach describing adsorption was introduced. CoupModel dynamically couples and simulates the flows of water, heat, carbon and nitrogen in the soil/plant/atmosphere system. Any number of plants may be defined and are divided into roots, leaves, stem and grain. The soil is considered in one vertical profile that may be represented into a maximum of 100 layers. The model is the windows-successor and integrated version of the DOS-models SOIL and SOILN, which have been widely used on different ecosystems and climate regions during 25 years time period. To this soil/plant/atmosphere model were introduced a module describing accumulation of a radionuclide in the biosphere originating from groundwater contamination. The

A model of accumulation of radionuclides in biosphere originating from groundwater contamination

Energy Technology Data Exchange (ETDEWEB)

Gaerdenaes, Annemieke [Swedish Univ. of Agricultural Sciences, Uppsala (Sweden). Dept. of Soil Sciences; Jansson, Per-Erik; Karlberg, Louise [Royal Inst. of Technology, Stockholm (Sweden). Dept. Land and Water Resources

2006-03-15

The objective of this study is to introduce a module in CoupModel describing the transport and accumulation in the biosphere of a radionuclide originating from a ground water contamination. Two model approaches describing the plant uptake of a radionuclide were included, namely passive and active uptake. Passive uptake means in this study that the root uptake rate of a radionuclide is governed by water uptake. Normal mechanism for the passive water uptake is the convective flux of water from the soil to the plant. An example of element taken up passively is Ca. Active plant uptake is in this model defined as the root uptake rate of a radionuclide that is governed by carbon assimilation i.e. photosynthesis and plant growth. The actively taken up element can for example be an element essential to plant, but not available in high enough concentration by passive uptake alone, like the major nutrients N and P or an element that very well resembles a plant nutrient, like Cs resembles K. Active uptake of trace element may occur alone or in addition to passive uptake. Normal mechanism for the active uptake is molecular diffusion from the soil solution to the roots or via any other organism living in symbiosis with the roots like the mycorrhiza. Also a model approach describing adsorption was introduced. CoupModel dynamically couples and simulates the flows of water, heat, carbon and nitrogen in the soil/plant/atmosphere system. Any number of plants may be defined and are divided into roots, leaves, stem and grain. The soil is considered in one vertical profile that may be represented into a maximum of 100 layers. The model is the windows-successor and integrated version of the DOS-models SOIL and SOILN, which have been widely used on different ecosystems and climate regions during 25 years time period. To this soil/plant/atmosphere model were introduced a module describing accumulation of a radionuclide in the biosphere originating from groundwater contamination. The

Regionally strong feedbacks between the atmosphere and terrestrial biosphere

Science.gov (United States)

Green, Julia K.; Konings, Alexandra G.; Alemohammad, Seyed Hamed; Berry, Joseph; Entekhabi, Dara; Kolassa, Jana; Lee, Jung-Eun; Gentine, Pierre

2017-06-01

The terrestrial biosphere and atmosphere interact through a series of feedback loops. Variability in terrestrial vegetation growth and phenology can modulate fluxes of water and energy to the atmosphere, and thus affect the climatic conditions that in turn regulate vegetation dynamics. Here we analyse satellite observations of solar-induced fluorescence, precipitation, and radiation using a multivariate statistical technique. We find that biosphere-atmosphere feedbacks are globally widespread and regionally strong: they explain up to 30% of precipitation and surface radiation variance in regions where feedbacks occur. Substantial biosphere-precipitation feedbacks are often found in regions that are transitional between energy and water limitation, such as semi-arid or monsoonal regions. Substantial biosphere-radiation feedbacks are often present in several moderately wet regions and in the Mediterranean, where precipitation and radiation increase vegetation growth. Enhancement of latent and sensible heat transfer from vegetation accompanies this growth, which increases boundary layer height and convection, affecting cloudiness, and consequently incident surface radiation. Enhanced evapotranspiration can increase moist convection, leading to increased precipitation. Earth system models underestimate these precipitation and radiation feedbacks mainly because they underestimate the biosphere response to radiation and water availability. We conclude that biosphere-atmosphere feedbacks cluster in specific climatic regions that help determine the net CO2 balance of the biosphere.

Database description for the biosphere code BIOMOD

International Nuclear Information System (INIS)

Kane, P.; Thorne, M.C.; Coughtrey, P.J.

1983-03-01

The development of a biosphere model for use in comparative radiological assessments of UK low and intermediate level waste repositories is discussed. The nature, content and sources of data contained in the four files that comprise the database for the biosphere code BIOMOD are described. (author)

Taking account of the biosphere in HLW assessment

International Nuclear Information System (INIS)

Smith, G.M.; Grogan, H.A.

1992-01-01

Evaluation of the biosphere in High level Waste assessment is beset with difficulties concerned with the disparity in timescales for geosphere and biosphere processes and prediction of the long term conditions in the biosphere. These issues are discussed against the background of developments on criteria, calculational end points, timescales, environmental change and human activities, relationship to other parts of the assessment, and uncertainty and variability. In this paper an outline for a surface environment assessment program is proposed

Biosphere models for safety assesment of radioactive waste disposal

Energy Technology Data Exchange (ETDEWEB)

Proehl, G; Olyslaegers, G; Zeevaert, T [SCK/CEN, Mol (Belgium); Kanyar, B [University of Veszprem (Hungary). Dept. of Radiochemistry; Pinedo, P; Simon, I [Centro de Investigaciones Energeticas Medioambientales y Tecnologicas (CIEMAT), Madrid (Spain); Bergstroem, U; Hallberg, B [Studsvik Ecosafe, Nykoeping (Sweden); Mobbs, S; Chen, Q; Kowe, R [NRPB, Chilton, Didcot (United Kingdom)

2004-07-01

The aim of the BioMoSA project has been to contribute in the confidence building of biosphere models, for application in performance assessments of radioactive waste disposal. The detailed objectives of this project are: development and test of practical biosphere models for application in long-term safety studies of radioactive waste disposal to different European locations, identification of features, events and processes that need to be modelled on a site-specific rather than on a generic base, comparison of the results and quantification of the variability of site-specific models developed according to the reference biosphere methodology, development of a generic biosphere tool for application in long term safety studies, comparison of results from site-specific models to those from generic one, Identification of possibilities and limitations for the application of the generic biosphere model. (orig.)

Biosphere models for safety assessment of radioactive waste disposal

International Nuclear Information System (INIS)

Proehl, G.; Olyslaegers, G.; Zeevaert, T.; Kanyar, B.; Bergstroem, U.; Hallberg, B.; Mobbs, S.; Chen, Q.; Kowe, R.

2004-01-01

The aim of the BioMoSA project has been to contribute in the confidence building of biosphere models, for application in performance assessments of radioactive waste disposal. The detailed objectives of this project are: development and test of practical biosphere models for application in long-term safety studies of radioactive waste disposal to different European locations, identification of features, events and processes that need to be modelled on a site-specific rather than on a generic base, comparison of the results and quantification of the variability of site-specific models developed according to the reference biosphere methodology, development of a generic biosphere tool for application in long term safety studies, comparison of results from site-specific models to those from generic one, Identification of possibilities and limitations for the application of the generic biosphere model. (orig.)

Past and Future of the Anthropogenic Biosphere

Science.gov (United States)

Ellis, E. C.

2010-12-01

Human populations and their use of land have now transformed most of the terrestrial biosphere into anthropogenic biomes (anthromes). As anthromes have emerged as the dominant global forms of ecological pattern and process, human interactions with terrestrial ecosystems have become a key earth system process, determining the structure and functioning of the biosphere. This presentation explores Ester Boserup’s land use intensification theories as models for understanding the emergence and dynamics of anthromes and their ecological processes, including their biogeochemistry and community structure, from the mostly wild biosphere of the Holocene to the primarily anthropogenic biosphere of the present and future. Existing global models and data for human population growth and land use over the Holocene differ in their portrayal of the global transition to a mostly anthropogenic biosphere. Yet there is little doubt that human populations have continued to grow over the long term and that anthromes have been increasingly important global ecological systems for millennia. This is conclusive evidence that human interactions with ecosystems can be sustained over the long-term, albeit under conditions that may no longer be realizable by either Earth or human systems. The classic Malthusian paradigm, in which human population growth outstrips natural resources leading to population collapse is unsupported by historical observations at global scale. Boserupian intensification is the better model, providing a robust theoretical foundation in which socio-ecological systems evolve as human populations increase, towards increasingly efficient use of limiting natural resources and enhanced production of anthropogenic ecological services such as food. This is not a story of technical advance, but rather of the forced adoption of ever more energy-intensive technical solutions in support of ever increasing population demands. And it does explain historical changes in the biosphere

Project SAFE. Update of the SFR-1 safety assessment. Phase 1. Appendix A6: Biosphere

International Nuclear Information System (INIS)

Kautsky, U.; Bergstroem, U.

1998-01-01

There has been a considerable development of models used for describing the turnover of radionuclides or other pollutants in the biosphere. New regulations require realistic assessments and description of effects on fauna and flora. Thus the use of trophic transfer models will be a more appropriate way to model the biosphere. These models take all accumulations of radio-nuclides in the ecosystem into account, not only direct pathways to man. Thus these models must be developed for this area. Moreover the turnover of loose deposits needs to be modelled. To be able to use these models there is a need to collect data on sediment composition, ecosystem structure and potential changes due e.g. sea-level fluctuations. These data will be collected from literature and where it is necessary complemented with field surveys. In some cases new models need to be developed. The integration of the geosphere and biosphere models is identified as an important issue

Smart systems integration and simulation

CERN Document Server

Poncino, Massimo; Pravadelli, Graziano

2016-01-01

This book-presents new methods and tools for the integration and simulation of smart devices. The design approach described in this book explicitly accounts for integration of Smart Systems components and subsystems as a specific constraint. It includes methodologies and EDA tools to enable multi-disciplinary and multi-scale modeling and design, simulation of multi-domain systems, subsystems and components at all levels of abstraction, system integration and exploration for optimization of functional and non-functional metrics. By covering theoretical and practical aspects of smart device design, this book targets people who are working and studying on hardware/software modelling, component integration and simulation under different positions (system integrators, designers, developers, researchers, teachers, students etc.). In particular, it is a good introduction to people who have interest in managing heterogeneous components in an efficient and effective way on different domains and different abstraction l...

Evaluation of Features, Events, and Processes (FEP) for the Biosphere Model

Energy Technology Data Exchange (ETDEWEB)

M. Wasiolek; P. Rogers

2004-10-27

The purpose of this analysis report is to evaluate and document the inclusion or exclusion of biosphere features, events, and processes (FEPs) with respect to modeling used to support the total system performance assessment (TSPA) for the license application (LA). A screening decision, either ''Included'' or ''Excluded'', is given for each FEP along with the corresponding technical basis for the excluded FEPs and the descriptions of how the included FEPs were incorporated in the biosphere model. This information is required by the U.S. Nuclear Regulatory Commission (NRC) regulations at 10 CFR 63.114 (d, e, and f) [DIRS 156605]. The FEPs addressed in this report concern characteristics of the reference biosphere, the receptor, and the environmental transport and receptor exposure pathways for the groundwater and volcanic ash exposure scenarios considered in biosphere modeling. This revision provides the summary of the implementation of included FEPs in TSPA-LA, (i.e., how the FEP is included); for excluded FEPs, this analysis provides the technical basis for exclusion from TSPA-LA (i.e., why the FEP is excluded). This report is one of the 10 documents constituting the biosphere model documentation suite. A graphical representation of the documentation hierarchy for the biosphere model is presented in Figure 1-1. This figure shows the interrelationships among the products (i.e., analysis and model reports) developed for biosphere modeling. The ''Biosphere Model Report'' describes in detail the biosphere conceptual model and mathematical model. The input parameter reports shown to the right of the ''Biosphere Model Report'' contain detailed descriptions of the model input parameters and their development. Outputs from these six reports are used in the ''Nominal Performance Biosphere Dose Conversion Factor Analysis and Disruptive Event Biosphere Dose Conversion Factor Analysis

JAPC Compact Simulator evolution to latest integration

International Nuclear Information System (INIS)

Nabeta, T.; Nakayama, Y.

1999-01-01

This paper describes the evolution of JAPC compact simulator from the first installation in 1988 until recent integration with SIMULATE-3 engineering code core model and extended simulation for Mid-loop operation and severe accidents. JAPC Compact Simulator has an advanced super compact rotating panel design. Three plants, Tokai 2 (GE BWR 5), Tsuruga 1 (GE BWR 2), Tsuruga 2 (MHI PWR 4-Loop) are simulated. The simulator has been used for training of operator and engineering personnel, and has continuously been upgraded to follow normal plant modifications as well as development in modeling and computer technology. The integration of SIMULATE-3 core model is, to our knowledge, the first integration of a real design code into a training simulator. SIMULATE-3 has been successfully integrated into the simulator and run in real time, without compromising the accuracy of SIMULATE-3. The code has been modified to also handle mid-loop operation and severe accidents. (author)

10 CFR 63.305 - Required characteristics of the reference biosphere.

Science.gov (United States)

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Required characteristics of the reference biosphere. 63... Standards § 63.305 Required characteristics of the reference biosphere. (a) Features, events, and processes that describe the reference biosphere must be consistent with present knowledge of the conditions in...

The Biosphere as a Living System. On Peculiarities of the Evolutionary Process on the Biosphere Level

OpenAIRE

Alexej Yablokov; Vladimir Levchenko; Anatolij Kerzhentsev

2016-01-01

The main purpose of this second essay the “biospherology” is to streamline and formalize the existing knowledge about the biosphere, to develop the theoretical basis of the theory of evolution of the biosphere. Despite the vast amount of research on ways of origin and development of life, yet there is no generally accepted theory of evolution of life on Earth, which would not only contain the phenomenology of this process, but also an understanding of the mechanism of functioning of the biosp...

Extended biosphere dataset for safety assessment of radioactive waste geological disposal

International Nuclear Information System (INIS)

Kato, Tomoko; Suzuki, Yuji

2007-01-01

JAEA has an on-going programme of research and development relating to the safety assessment of the deep geological disposal systems of high-level radioactive waste (HLW) and transuranic waste (TRU). In the safety assessment of HLW and TRU disposal systems, biosphere assessment is necessary to estimate future radiological impacts on human beings (e.g. radiation dose). In order to estimate radiation dose, consideration needs to be given to the biosphere into which future releases of radionuclides might occur and to the associated future human behaviour. The data of some biosphere parameters needed to be updated by appropriate data sources for generic and site-specific biosphere assessment to improve reliability for the biosphere assessment, because some data published in the 1980's or the early 90's were found to be inappropriate for the recent biosphere assessment. Therefore, data of the significant parameters (especially for element-dependent) were set up on the basis of recent information, to update the generic biosphere dataset. (author)

Reviewing Biosphere Reserves globally: effective conservation action or bureaucratic label?

Science.gov (United States)

Coetzer, Kaera L; Witkowski, Edward T F; Erasmus, Barend F N

2014-02-01

The Biosphere Reserve (BR) model of UNESCO's Man and the Biosphere Programme reflects a shift towards more accountable conservation. Biosphere Reserves attempt to reconcile environmental protection with sustainable development; they explicitly acknowledge humans, and human interests in the conservation landscape while still maintaining the ecological values of existing protected areas. Conceptually, this model is attractive, with 610 sites currently designated globally. Yet the practical reality of implementing dual 'conservation' and 'development' goals is challenging, with few examples successfully conforming to the model's full criteria. Here, we review the history of Biosphere Reserves from first inception in 1974 to the current status quo, and examine the suitability of the designation as an effective conservation model. We track the spatial expansion of Biosphere Reserves globally, assessing the influence of the Statutory Framework of the World Network of Biosphere Reserves and Seville strategy in 1995, when the BR concept refocused its core objectives on sustainable development. We use a comprehensive range of case studies to discuss conformity to the Programme, the social and ecological consequences associated with implementation of the designation, and challenges in aligning conservation and development. Given that the 'Biosphere Reserve' label is a relatively unknown designation in the public arena, this review also provides details on popularising the Biosphere Reserve brand, as well as prospects for further research, currently unexploited, but implicit in the designation. © 2013 The Authors. Biological Reviews © 2013 Cambridge Philosophical Society.

Integrate Data into Scientific Workflows for Terrestrial Biosphere Model Evaluation through Brokers

Science.gov (United States)

Wei, Y.; Cook, R. B.; Du, F.; Dasgupta, A.; Poco, J.; Huntzinger, D. N.; Schwalm, C. R.; Boldrini, E.; Santoro, M.; Pearlman, J.; Pearlman, F.; Nativi, S.; Khalsa, S.

2013-12-01

Terrestrial biosphere models (TBMs) have become integral tools for extrapolating local observations and process-level understanding of land-atmosphere carbon exchange to larger regions. Model-model and model-observation intercomparisons are critical to understand the uncertainties within model outputs, to improve model skill, and to improve our understanding of land-atmosphere carbon exchange. The DataONE Exploration, Visualization, and Analysis (EVA) working group is evaluating TBMs using scientific workflows in UV-CDAT/VisTrails. This workflow-based approach promotes collaboration and improved tracking of evaluation provenance. But challenges still remain. The multi-scale and multi-discipline nature of TBMs makes it necessary to include diverse and distributed data resources in model evaluation. These include, among others, remote sensing data from NASA, flux tower observations from various organizations including DOE, and inventory data from US Forest Service. A key challenge is to make heterogeneous data from different organizations and disciplines discoverable and readily integrated for use in scientific workflows. This presentation introduces the brokering approach taken by the DataONE EVA to fill the gap between TBMs' evaluation scientific workflows and cross-organization and cross-discipline data resources. The DataONE EVA started the development of an Integrated Model Intercomparison Framework (IMIF) that leverages standards-based discovery and access brokers to dynamically discover, access, and transform (e.g. subset and resampling) diverse data products from DataONE, Earth System Grid (ESG), and other data repositories into a format that can be readily used by scientific workflows in UV-CDAT/VisTrails. The discovery and access brokers serve as an independent middleware that bridge existing data repositories and TBMs evaluation scientific workflows but introduce little overhead to either component. In the initial work, an OpenSearch-based discovery broker

Natural releases from contaminated groundwater, Example Reference Biosphere 2B

Energy Technology Data Exchange (ETDEWEB)

Simon, I. [CIEMAT/PIRA, Avda Complutense 22, 28040 Madrid (Spain)]. E-mail: isc@csn.es; Naito, M. [Nuclear Waste Management Organization of Japan (NUMO), 4-1-23 Shiba, Minato-ku, Tokyo, 108-0014 (Japan); Thorne, M.C. [Mike Thorne and Associates Limited, Abbotsleigh, Kebroyd Mount, Ripponden, Halifax, West Yorkshire HX6 3JA (United Kingdom); Walke, R. [Enviros QuantiSci, Building D5, Culham Science Centre, Culham, Oxfordshire OX14 3DB (United Kingdom)

2005-07-01

Safety assessment is a tool which, by means of an iterative procedure, allows the evaluation of the performance of a disposal system and its potential impact on human health and the environment. Radionuclides from a deep geological disposal facility may not reach the surface environment until many tens of thousands of years after closure of the facility. The BIOMASS Programme on BIOsphere Modelling and ASSessment developed Examples of 'Reference Biospheres' to illustrate the use of the methodology and to demonstrate how biosphere models can be developed and justified as being fit for purpose. The practical examples are also intended to be useful in their own right. The Example Reference Biosphere 2B presented here involves the consideration of alternative types of geosphere-biosphere interfaces and calculation of doses to members of hypothetical exposure groups arising from a wide range of exposure pathways within agricultural and semi-natural environments, but without allowing for evolution of the corresponding biosphere system. The example presented can be used as a generic analysis in some situations although it was developed around a relatively specific conceptual model. It should be a useful practical example, but the above numerical results are not intended to be understood as prescribed biosphere 'conversion factors'.

Natural releases from contaminated groundwater, Example Reference Biosphere 2B

International Nuclear Information System (INIS)

Simon, I.; Naito, M.; Thorne, M.C.; Walke, R.

2005-01-01

Safety assessment is a tool which, by means of an iterative procedure, allows the evaluation of the performance of a disposal system and its potential impact on human health and the environment. Radionuclides from a deep geological disposal facility may not reach the surface environment until many tens of thousands of years after closure of the facility. The BIOMASS Programme on BIOsphere Modelling and ASSessment developed Examples of 'Reference Biospheres' to illustrate the use of the methodology and to demonstrate how biosphere models can be developed and justified as being fit for purpose. The practical examples are also intended to be useful in their own right. The Example Reference Biosphere 2B presented here involves the consideration of alternative types of geosphere-biosphere interfaces and calculation of doses to members of hypothetical exposure groups arising from a wide range of exposure pathways within agricultural and semi-natural environments, but without allowing for evolution of the corresponding biosphere system. The example presented can be used as a generic analysis in some situations although it was developed around a relatively specific conceptual model. It should be a useful practical example, but the above numerical results are not intended to be understood as prescribed biosphere 'conversion factors'

The PSACOIN level 1B exercise: A probabilistic code intercomparison involving a four compartment biosphere model

International Nuclear Information System (INIS)

Klos, R.A.; Sinclair, J.E.; Torres, C.; Mobbs, S.F.; Galson, D.A.

1991-01-01

The probabilistic Systems Assessment Code (PSAC) User Group of the OECD Nuclear Energy Agency has organised a series of code intercomparison studies of relevance to the performance assessment of underground repositories for radioactive wastes - known collectively by the name PSACOIN. The latest of these to be undertaken is designated PSACOIN Level 1b, and the case specification provides a complete assessment model of the behaviour of radionuclides following release into the biosphere. PSACOIN Level 1b differs from other biosphere oriented intercomparison exercises in that individual dose is the end point of the calculations as opposed to any other intermediate quantity. The PSACOIN Level 1b case specification describes a simple source term which is used to simulate the release of activity to the biosphere from certain types of near surface waste repository, the transport of radionuclides through the biosphere and their eventual uptake by humankind. The biosphere sub model comprises 4 compartments representing top and deep soil layers, river water and river sediment. The transport of radionuclides between the physical compartments is described by ten transfer coefficients and doses to humankind arise from the simultaneous consumption of water, fish, meat, milk, and grain as well as from dust inhalation and external γ-irradiation. The parameters of the exposure pathway sub model are chosen to be representative of an individual living in a small agrarian community. (13 refs., 3 figs., 2 tabs.)

Earth Applications of Closed Ecological Systems: Relevance to the Development of Sustainability in our Global Biosphere

Science.gov (United States)

Dempster, W.; van Thillo, M.; Alling, A.; Allen, J.; Silverstone, S.; Nelson, M.

The parallels between the challenges facing bioregenerative life support and closed ecological systems and those in our global biosphere are striking. At the scale of the current global technosphere and human population, it is increasingly obvious that the biosphere can no longer be counted on to be vast enough to safely buffer and absorb technogenic and anthropogenic pollutants. With an increasing percentage of the world's natural resources and primary productivity being dictated by, and directed to, humans, our species is starting to appreciate its survival and quality of life depends on regulating its activities, and insuring that crucial biogeochemical cycles continue to function. This shift of consciousness has led to the widespread call for moving towards the sustainability of human activities. For researchers working on bioreenerative life support, the small volumes and faster cycling times have made it obvious that systems must be created in to ensure renewal of water and atmosphere, nutrient recycling, and where all technical systems can be safely integrated with the maintenance of safe environmental conditions. The development of technical systems that can be fully integrated with the living systems that they support should be a harbinger of new perspectives in the global environment. The paper will review some of these environmental technologies which are emerging from bioregenerative life support system research such as high-yield intensive agricultural methods, waste treatment and nutrient recycling, air purification, modeling, sensor and control systems and their potential applications in the global biosphere. In addition, a review of the human experience in closed ecological systems shows that these can offer opportunities for public education and consciousness-changing of how humans regard our global biosphere.

A simplified biosphere model for global climate studies

Science.gov (United States)

Xue, Y.; Sellers, P. J.; Kinter, J. L.; Shukla, J.

1991-01-01

A comprehensive analysis of the simple biosphere model (SIB) of Sellers et al. (1986) is performed in an effort to bridge the gap between the typical hydrological treatment of the land surface biosphere and the conventional general circulation model treatment, which is specified through a single parameter. Approximations are developed that stimulate the effects of reduced soil moisture more simply, maintaining the essence of the biophysical concepts utilized in SIB. Comparing the reduced parameter biosphere with those from the original formulation in a GCM and a zero-dimensional model shows the simplified version to reproduce the original results quite closely.

Demonstration of DECOS: representation of four biosphere states

International Nuclear Information System (INIS)

Ashton, J.

1988-09-01

This report describes the use of the dynamic biosphere code, DECOS, in stand alone mode, to represent a site in four possible biosphere states. The biosphere states have been chosen to illustrate a range of conditions which may prevail at the site. The behaviour of the system in each state has been considered and the capability of DECOS to switch between the states has been demonstrated. The intention of this work is to test the function of DECOS. Results in this report are illustrative and do not form any part of a radiological assessment of the site. (author)

Posiva's Strategy for Biosphere Studies

International Nuclear Information System (INIS)

Hautojaervi, Aimo; Vieno, Timo

2002-01-01

Aimo Hautojaervi (Posiva, Finland) explained that Posiva follows the regulation from authorities that will be published soon on the STUK Web site in an English version. As an example, he said that a dose constraint of 0.1 mSv/a must be considered for several thousand years and release rate constraint for the long term. The values for these constraints were given by STUK and Posiva needs to demonstrate compliance. Posiva welcomes the regulator's clear requirements and guidance in the field of biosphere analyses. Moreover, Aimo Hautojaervi presented the planned future work that will be carried out by Posiva. As well as carrying out biosphere modelling for potential recipients at Olkiluoto, Posiva will conduct biosphere analyses for wells, lakes, seas, etc., and further evaluate human actions and develop biosphere models in close cooperation with SKB. Posiva is also actively seeking international cooperation in these new researches fields, for example within IAEA. Two potentially problematic radionuclides were also mentioned: C-14 and Radon plus decay products. These two radionuclides will be studied in depth in the future Posiva research and development programme

Gene expression in the deep biosphere.

Science.gov (United States)

Orsi, William D; Edgcomb, Virginia P; Christman, Glenn D; Biddle, Jennifer F

2013-07-11

Scientific ocean drilling has revealed a deep biosphere of widespread microbial life in sub-seafloor sediment. Microbial metabolism in the marine subsurface probably has an important role in global biogeochemical cycles, but deep biosphere activities are not well understood. Here we describe and analyse the first sub-seafloor metatranscriptomes from anaerobic Peru Margin sediment up to 159 metres below the sea floor, represented by over 1 billion complementary DNA (cDNA) sequence reads. Anaerobic metabolism of amino acids, carbohydrates and lipids seem to be the dominant metabolic processes, and profiles of dissimilatory sulfite reductase (dsr) transcripts are consistent with pore-water sulphate concentration profiles. Moreover, transcripts involved in cell division increase as a function of microbial cell concentration, indicating that increases in sub-seafloor microbial abundance are a function of cell division across all three domains of life. These data support calculations and models of sub-seafloor microbial metabolism and represent the first holistic picture of deep biosphere activities.

Ciliates and the rare biosphere-community ecology and population dynamics.

Science.gov (United States)

Weisse, Thomas

2014-01-01

Application of deep sequencing technologies to environmental samples and some detailed morphological studies suggest that there is a vast, yet unexplored rare ciliate biosphere, tentatively defined in terms of operational taxonomic units. However, very few studies complemented molecular and phylogenetic data with morphological and ecological descriptions of the species inventory. This is mainly because the sampling effort increases strongly with decreasing species abundance. In spite of this limited knowledge, it is clear that species that are rare under certain environmental conditions (temporal rare biosphere) may become abundant when the physical, chemical, and biological variables of their habitat change. Furthermore, some species may always be present in low numbers if their dispersal rates are exceedingly high (accidental rare biosphere). An intriguing question is whether there are some species that are always rare, i.e., in every suitable environment. This permanent rare biosphere is conceptually different from the temporal rare biosphere. This review characterizes typical aquatic habitats of the rare ciliate biosphere, portrays different scenarios under which some or even many species may be permanently rare (background fauna), and identifies some fundamental questions that need to be addressed to achieve a better understanding of the population dynamics of the rare ciliate biosphere. © 2014 The Authors The Journal of Eukaryotic Microbiology published by Wiley Periodicals, Inc. on behalf of International Society of Protistologists.

Earth applications of closed ecological systems: relevance to the development of sustainability in our global biosphere.

Science.gov (United States)

Nelson, M; Allen, J; Alling, A; Dempster, W F; Silverstone, S

2003-01-01

The parallels between the challenges facing bioregenerative life support in artificial closed ecological systems and those in our global biosphere are striking. At the scale of the current global technosphere and expanding human population, it is increasingly obvious that the biosphere can no longer safely buffer and absorb technogenic and anthropogenic pollutants. The loss of biodiversity, reliance on non-renewable natural resources, and conversion of once wild ecosystems for human use with attendant desertification/soil erosion, has led to a shift of consciousness and the widespread call for sustainability of human activities. For researchers working on bioregenerative life support in closed systems, the small volumes and faster cycling times than in the Earth's biosphere make it starkly clear that systems must be designed to ensure renewal of water and atmosphere, nutrient recycling, production of healthy food, and safe environmental methods of maintaining technical systems. The development of technical systems that can be fully integrated and supportive of living systems is a harbinger of new perspectives as well as technologies in the global environment. In addition, closed system bioregenerative life support offers opportunities for public education and consciousness changing of how to live with our global biosphere. c2003 COSPAR. Published by Elsevier Science Ltd. All rights reserved.

Biosphere: problems and solutions

Energy Technology Data Exchange (ETDEWEB)

Veziroglu, T.N. (ed.)

1984-01-01

This volume contains a large number of typescript papers from a symposium on the Biosphere, held in Miami Beach in 1984. The topics range from chemical landfills to space debris, with many aspects of chemistry throughout.

A comparative Study between GoldSim and AMBER Based Biosphere Assessment Models for an HLW Repository

International Nuclear Information System (INIS)

Lee, Youn-Myoung; Hwang, Yong-Soo

2007-01-01

To demonstrate the performance of a repository, the dose exposure rate to human being due to long-term nuclide releases from a high-level waste repository (HLW) should be evaluated and the results compared to the dose limit presented by the regulatory bodies. To evaluate such a dose rate to an individual, biosphere assessment models have been developed and implemented for a practical calculation with the aid of such commercial tools as AMBER and GoldSim, both of which are capable of probabilistic and deterministic calculation. AMBER is a general purpose compartment modeling tool and GoldSim is another multipurpose simulation tool for dynamically modeling complex systems, supporting a higher graphical user interface than AMBER and a postprocessing feature. And also unlike AMBER, any kind of compartment scheme can be rather simply constructed with an appropriate transition rate between compartments, GoldSim is designed to facilitate the object-oriented modules to address any specialized programs, similar to solving jig saw puzzles. During the last couple of years a compartment modeling approach for a biosphere has been mainly carried out with AMBER in KAERI in order to conservatively or rather roughly provide dose conversion factors to get the final exposure rate due to a nuclide flux into biosphere over various geosphere-biosphere interfaces (GBIs) calculated through nuclide transport modules. This caused a necessity for a newly devised biosphere model that could be coupled to a nuclide transport model with less conservatism in the frame of the development of a total system performance assessment modeling tool, which could be successfully done with the aid of GoldSim. Therefore, through the current study, some comparison results of the AMBER and the GoldSim approaches for the same case of a biosphere modeling without any consideration of geosphere transport are introduced by extending a previous study

Components, processes and interactions in the biosphere

Energy Technology Data Exchange (ETDEWEB)

2010-12-15

This report describes the processes and interactions between components in the biosphere that may be important in a safety assessment for radioactive waste disposal. The processes are general, i.e. they can be used in all safety analyses for underground repositories and are not specific to a particular method or location. Processes related to the geosphere and specific repository types (e.g. the KBS-3 method) can be found in /Skagius et al. 1995, SKB 2001, 2006, 2010a/. This report describes a biosphere interaction matrix that has been used in support of SR-Site and that can be used in future safety assessments. The work of defining and characterising processes in the biosphere is ongoing and many persons from different disciplines have been involved in the identification and characterisation of processes

Components, processes and interactions in the biosphere

International Nuclear Information System (INIS)

2010-12-01

This report describes the processes and interactions between components in the biosphere that may be important in a safety assessment for radioactive waste disposal. The processes are general, i.e. they can be used in all safety analyses for underground repositories and are not specific to a particular method or location. Processes related to the geosphere and specific repository types (e.g. the KBS-3 method) can be found in /Skagius et al. 1995, SKB 2001, 2006, 2010a/. This report describes a biosphere interaction matrix that has been used in support of SR-Site and that can be used in future safety assessments. The work of defining and characterising processes in the biosphere is ongoing and many persons from different disciplines have been involved in the identification and characterisation of processes

'Reference Biospheres' for solid radioactive waste disposal. Report of BIOMASS Theme 1 of the BIOsphere Modelling and ASSessment (BIOMASS) Programme. Part of the IAEA Co-ordinated Research Project on Biosphere Modelling and Assessment (BIOMASS)

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-07-01

The IAEA Programme on BIOsphere Modelling and ASSessment (BIOMASS) was launched in Vienna in October 1996. The programme was concerned with developing and improving capabilities to predict the transfer of radionuclides in the environment. The programme had three themes: Theme 1: Radioactive Waste Disposal. The objective was to develop the concept of a standard or reference biosphere for application to the assessment of the long-term safety of repositories for radioactive waste. Under the general heading of 'Reference Biospheres', six Task Groups were established: Task Group 1: Principles for the Definition of Critical and Other Exposure Groups. Task Group 2: Principles for the Application of Data to Assessment Models. Task Group 3: Consideration of Alternative Assessment Contexts. Task Group 4: Biosphere System Identification and Justification. Task Group 5: Biosphere System Descriptions. Task Group 6: Model Development. Theme 2: Environmental Releases. BIOMASS provided an international forum for activities aimed at increasing the confidence in methods and models for the assessment of radiation exposure related to environmental releases. Two Working Groups addressed issues concerned with the reconstruction of radiation doses received by people from past releases of radionuclides to the environment and the evaluation of the efficacy of remedial measures. Theme 3: Biosphere Processes. The aim of this Theme was to improve capabilities for modelling the transfer of radionuclides in particular parts of the biosphere identified as being of potential radiological significance and where there were gaps in modelling approaches. This topic was explored using a range of methods including reviews of the literature, model inter-comparison exercises and, where possible, model testing against independent sources of data. Three Working Groups were established to examine the modelling of: (1) long term tritium dispersion in the environment; (2) radionuclide uptake by fruits; and (3

Toward Reducing Uncertainties in Biospheric Carbon Uptake in the American West: An Atmospheric Perspective

Science.gov (United States)

Lin, J. C.; Stephens, B. B.; Mallia, D.; Wu, D.; Jacobson, A. R.

2015-12-01

Despite the need for an understanding of terrestrial biospheric carbon fluxes to account for carbon cycle feedbacks and predict future CO2 concentrations, knowledge of such fluxes at the regional scale remains poor. This is particularly true in mountainous areas, where lack of observations combined with difficulties in their interpretation lead to significant uncertainties. Yet mountainous regions are also where significant forest cover and biomass are found—areas that have the potential to serve as carbon sinks. In particular, understanding carbon fluxes in the American West is of critical importance for the U.S. carbon budget, as the large area and biomass indicate potential for carbon sequestration. However, disturbances such as drought, insect outbreak, and wildfires in this region can introduce significant perturbations to the carbon cycle and thereby affect the amount of carbon sequestered by vegetation in the Rockies. To date, there have been few atmospheric CO2 observations in the American Rockies due to a combination of difficulties associated with logistics and interpretation of the measurements in the midst of complex terrain. Among the few sites are those associated with NCAR's Regional Atmospheric Continuous CO2 Network in the Rocky Mountains (Rocky RACCOON). As CO2 observations in mountainous areas increase in the future, it is imperative that they can be properly interpreted to yield information about biospheric carbon fluxes. In this paper, we will present CO2 observations from RACCOON, along with atmospheric simulations that attempt to extract information about biospheric carbon fluxes in the Western U.S. from these observations. We show that atmospheric models can significantly misinterpret the CO2 observations, leading to large errors in the retrieved biospheric fluxes, due to erroneous atmospheric flows. Recommendations for ways to minimize such errors and properly link the CO2 concentrations to biospheric fluxes are discussed.

The biosphere rules.

Science.gov (United States)

Unruh, Gregory C

2008-02-01

Sustainability, defined by natural scientists as the capacity of healthy ecosystems to function indefinitely, has become a clarion call for business. Leading companies have taken high-profile steps toward achieving it: Wal-Mart, for example, with its efforts to reduce packaging waste, and Nike, which has removed toxic chemicals from its shoes. But, says Unruh, the director of Thunderbird's Lincoln Center for Ethics in Global Management, sustainability is more than an endless journey of incremental steps. It is a destination, for which the biosphere of planet Earth--refined through billions of years of trial and error--is a perfect model. Unruh distills some lessons from the biosphere into three rules: Use a parsimonious palette. Managers can rethink their sourcing strategies and dramatically simplify the number and types of materials their companies use in production, making recycling cost-effective. After the furniture manufacturer Herman Miller discovered that its leading desk chair had 200 components made from more than 800 chemical compounds, it designed an award-winning successor whose far more limited materials palette is 96% recyclable. Cycle up, virtuously. Manufacturers should design recovery value into their products at the outset. Shaw Industries, for example, recycles the nylon fiber from its worn-out carpet into brand-new carpet tile. Exploit the power of platforms. Platform design in industry tends to occur at the component level--but the materials in those components constitute a more fundamental platform. Patagonia, by recycling Capilene brand performance underwear, has achieved energy costs 76% below those for virgin sourcing. Biosphere rules can teach companies how to build ecologically friendly products that both reduce manufacturing costs and prove highly attractive to consumers. And managers need not wait for a green technological revolution to implement them.

A New ′Conservation Space′? Protected Areas, Environmental Economic Activities and Discourses in Two Yucatán Biosphere Reserves in Mexico

Directory of Open Access Journals (Sweden)

Sabrina Doyon

2014-01-01

Full Text Available This article examines some of the local socioeconomic repercussions of two biosphere reserves on the Yucatán Peninsula-Ría Celestún and Ría Lagartos. We analyse aspects of the relationship that the residents of the six villages located within the two reserves have with their environment, by examining both the ′environmental economic activities′ residents are involved in and their discourses on, and interpretations of, the notion of environment and the conservation precepts put forward by the biosphere reserves. Our research explores how the objectives of the United Nations Educational, Scientific and Cultural Organization′s Man and Biosphere Programme, disseminated by biosphere reserves, are put into practice on the ground. In particular, we look at how environmental economic activities are experienced and practised without necessarily being accompanied by the integration, acceptance, and internalisation of conservation principles-and how these activities contribute, or fail to contribute, to the crystallisation of a new ′conservation space′.

Biosphere Modeling and Analyses in Support of Total System Performance Assessment

International Nuclear Information System (INIS)

Tappen, J. J.; Wasiolek, M. A.; Wu, D. W.; Schmitt, J. F.; Smith, A. J.

2002-01-01

The Nuclear Waste Policy Act of 1982 established the obligations of and the relationship between the U.S. Environmental Protection Agency (EPA), the U.S. Nuclear Regulatory Commission (NRC), and the U.S. Department of Energy (DOE) for the management and disposal of high-level radioactive wastes. In 1985, the EPA promulgated regulations that included a definition of performance assessment that did not consider potential dose to a member of the general public. This definition would influence the scope of activities conducted by DOE in support of the total system performance assessment program until 1995. The release of a National Academy of Sciences (NAS) report on the technical basis for a Yucca Mountain-specific standard provided the impetus for the DOE to initiate activities that would consider the attributes of the biosphere, i.e. that portion of the earth where living things, including man, exist and interact with the environment around them. The evolution of NRC and EPA Yucca Mountain-specific regulations, originally proposed in 1999, was critical to the development and integration of biosphere modeling and analyses into the total system performance assessment program. These proposed regulations initially differed in the conceptual representation of the receptor of interest to be considered in assessing performance. The publication in 2001 of final regulations in which the NRC adopted standard will permit the continued improvement and refinement of biosphere modeling and analyses activities in support of assessment activities

Biosphere Modeling and Analyses in Support of Total System Performance Assessment

International Nuclear Information System (INIS)

Jeff Tappen; M.A. Wasiolek; D.W. Wu; J.F. Schmitt

2001-01-01

The Nuclear Waste Policy Act of 1982 established the obligations of and the relationship between the U.S. Environmental Protection Agency (EPA), the U.S. Nuclear Regulatory Commission (NRC), and the U.S. Department of Energy (DOE) for the management and disposal of high-level radioactive wastes. In 1985, the EPA promulgated regulations that included a definition of performance assessment that did not consider potential dose to a member of the general public. This definition would influence the scope of activities conducted by DOE in support of the total system performance assessment program until 1995. The release of a National Academy of Sciences (NAS) report on the technical basis for a Yucca Mountain-specific standard provided the impetus for the DOE to initiate activities that would consider the attributes of the biosphere, i.e. that portion of the earth where living things, including man, exist and interact with the environment around them. The evolution of NRC and EPA Yucca Mountain-specific regulations, originally proposed in 1999, was critical to the development and integration of biosphere modeling and analyses into the total system performance assessment program. These proposed regulations initially differed in the conceptual representation of the receptor of interest to be considered in assessing performance. The publication in 2001 of final regulations in which the NRC adopted standard will permit the continued improvement and refinement of biosphere modeling and analyses activities in support of assessment activities

Theoretical foundation, goals, and methodology of a new science--biospherics

Science.gov (United States)

Shaffer, J A

1994-01-01

Scientific endeavor is motivated by mankind's needs, desires, and inherent nature to explore. The history of scientific revolutions involves paradigmatic breakthroughs that uncover previously unknown perspectives by which a phenomenon can be viewed. In this issue a noted scientist, Nickolai Pechurkin, gives a seminal brief on the theoretical foundation, goals, and methodology leading to a new science--biospherics. While biospherics has so far eluded a simple definition, it is not something taken from "whole cloth." Biospherics has many antecedents, but most noticeably arises from the global scale research and theory associated with the technological advances of the Space-Age. The Space-Age also created the need for totally closed life-support systems which involve experimentation with artificial biospheres.

Biosphere dose conversion Factor Importance and Sensitivity Analysis

International Nuclear Information System (INIS)

M. Wasiolek

2004-01-01

This report presents importance and sensitivity analysis for the environmental radiation model for Yucca Mountain, Nevada (ERMYN). ERMYN is a biosphere model supporting the total system performance assessment (TSPA) for the license application (LA) for the Yucca Mountain repository. This analysis concerns the output of the model, biosphere dose conversion factors (BDCFs) for the groundwater, and the volcanic ash exposure scenarios. It identifies important processes and parameters that influence the BDCF values and distributions, enhances understanding of the relative importance of the physical and environmental processes on the outcome of the biosphere model, includes a detailed pathway analysis for key radionuclides, and evaluates the appropriateness of selected parameter values that are not site-specific or have large uncertainty

'Reference Biospheres' for solid radioactive waste disposal: the BIOMASS Methodology

International Nuclear Information System (INIS)

Crossland, I.G.; Pinedo, P.; Kessler, J.H.; Torres-Vidal, C.; Walters, B.

2005-01-01

The BIOMASS Theme 1 project has developed a methodology for the logical and defensible construction of 'assessment biospheres': mathematical representations of biospheres used in the total system performance assessment of radioactive waste disposal. The BIOMASS Methodology provides a systematic approach to decision making, including decisions on how to address biosphere change. The BIOMASS Methodology was developed through consultation and collaboration with many relevant organisations, including regulators, operators and a variety of independent experts. It has been developed to be practical and to be consistent with recommendations from ICRP and IAEA on radiation protection in the context of the disposal of long-lived solid radioactive wastes. The five main steps in the methodology are described in this paper. The importance of a clear assessment context, to clarify intentions and to support a coherent biosphere assessment process within an overall repository performance assessment, is strongly emphasised. A well described assessment context is an important tool for ensuring consistency across the performance assessment as a whole. The use of interaction matrices has been found to be helpful in clarifying the interactions between different habitats within the biosphere system and the significant radionuclide transfer pathways within the biosphere system. Matrices also provide a useful means of checking for consistency

Biosphere modeling for safety assessment to high-level radioactive waste geological disposal. Application of reference biosphere methodology to safety assesment of geological disposal

International Nuclear Information System (INIS)

Baba, Tomoko; Ishihara, Yoshinao; Ishiguro, Katsuhiko; Suzuki, Yuji; Naito, Morimasa

2000-01-01

In the safety assessment of a high-level radioactive waste disposal system, it is required to estimate future radiological impacts on human beings. Consideration of living habits and the human environment in the future involves a large degree of uncertainty. To avoid endless speculation aimed at reducing such uncertainty, an approach is applied for identifying and justifying a 'reference biosphere' for use in safety assessment in Japan. considering a wide range of Japanese geological environments, saline specific reference biospheres' were developed using an approach consistent with the BIOMOVS II reference biosphere methodology. (author)

Comparison of biospheric models of radionuclides transfer

International Nuclear Information System (INIS)

Garcia-Olivares, A.; Carrasco, E.

1992-01-01

The international BIOMOVS A4 exercise has made possible that a set of biospheric transfer models could predict the daily radionuclide concentration in soils, forage and some animal products (cow milk and beef) after the Chernobyl accident. The aim was to compare these predictions with experimental results in 13 locations around the world. The data provided were essentially the daily air contamination and precipitation and some site-dependent parameters. It was a blind test, the locations and experimental measures were not revealed in advance. Twenty-three models (quasi-steady state and time-dependent models) were involved in the study. In this paper an explicit criterion has been used in order to select the models that better fitted the experimental results. In nine selected locations a comparative analysis between these models has been carried out for obtaining the structural and parametric coincidences that could explain their relatively good performance. The first evidence obtained has been that a wide set of models were able to predict the order of magnitude of the nuclides time-integrated concentrations in several important biospheric comportments. But only a few models, all of them with a 'dynamical' structure, fitted the daily behavior with the reasonable agreement. The dynamical structure of the five most successful models at predicting for Caesium 137 (CIRCLE, ECOSYS, PATHWAY, PRYMA and RAGTIME) shows some common patterns that may be relevant for a better modelling of nuclear accident scenarios. (author)

Improvement of biosphere assessment methodology for performance assessment of geological disposal facility. 2

International Nuclear Information System (INIS)

Miki, Takahito; Yoshida, Hideji; Ikeda, Takao

2002-02-01

This report contains results on study of Geosphere-Biosphere Interface (GBI), development of biosphere assessment model for gaseous and volatile radionuclides, review of biosphere assessment and research on safety indicators. Regarding study of Geosphere-Biosphere Interface (GBI), FEP database for the Geosphere-Biosphere Transitions Zone (GBTZ) were compiled. Furthermore, release scenarios were identified from the FEP database, and review of conservativeness and robustness of the conceptual and mathematical models developed previously by JNC were undertaken. Regarding development of biosphere assessment model for gaseous and volatile radionuclides, the conceptual and mathematical models were developed, and it was confirmed that the impact of the exposure pathway regarding gas release to flux-to-dose conversion factor is small. Regarding review of biosphere assessment data, the parameters which were used on JNC second progress report were reviewed and classified using the biosphere data protocol categories. Furthermore, the data for key parameter (important but poorly characterized parameters) were revised. Regarding research on safety indicator, some kinds of safety indicators, especially for the non-radioactive contaminant and for the non-human biota, are reviewed. (author)

Biospheres and solar system exploration

Science.gov (United States)

Paine, Thomas O.

1990-01-01

The implications of biosphere technology is briefly examined. The exploration status and prospects of each world in the solar system is briefly reviewed, including the asteroid belt, the moon, and comets. Five program elements are listed as particularly critical for future interplanetary operations during the coming extraterrestrial century. They include the following: (1) a highway to Space (earth orbits); (2) Orbital Spaceports to support spacecraft assembly, storage, repair, maintenance, refueling, launch, and recovery; (3) a Bridge Between Worlds to transport cargo and crews to the moon and beyond to Mars; (4) Prospecting and Resource Utilization Systems to map and characterize the resources of planets, moons, and asteroids; and (5) Closed Ecology Biospheres. The progress in these five field is reviewed.

Omora Ethnobotanical Park and the UNESCO Cape Horn Biosphere Reserve

Directory of Open Access Journals (Sweden)

Eugene C. Hargrove

2008-12-01

Full Text Available The biocultural conservation and research initiative of Omora Ethnobotanical Park and the UNESCO Cape Horn Biosphere Reserve was born in a remote part of South America and has rapidly expanded to attain regional, national, and international relevance. The park and the biosphere reserve, led by Ricardo Rozzi and his team, have made significant progress in demonstrating the way academic research supports local cultures, social processes, decision making, and conservation. It is a dynamic hive of investigators, artists, writers, students, volunteers, and friends, all exploring ways to better integrate academia and society. The initiative involves an informal consortium of institutions and organizations; in Chile, these include the University of Magallanes, the Omora Foundation, and the Institute of Ecology and Biodiversity, and in the United States, the University of North Texas, the Omora Sub-Antarctic Research Alliance, and the Center for Environmental Philosophy at the University of North Texas. The consortium intends to function as a hub through which other institutions and organizations can be involved in research, education, and biocultural conservation. The park constitutes one of three long-term socio-ecological research sites in Chile of the Institute of Ecology and Biodiversity.

A Better Representation of European Croplands into a Global Biosphere Model

Science.gov (United States)

Gervois, S.; de Noblet, N.; Viovy, N.; Ciais, P.; Brisson, N.; Seguin, B.

2002-12-01

conducted at European scale two experiments where all arable lands are covered by corn for the first one, and by natural grasslands for the second one. We compared the fluxes between these two simulations. In the case of corn cover, the vegetative period is reduced and the absorption of carbon is more enhanced (until 15 per cent) during the maximum extension of vegetation. This work shows that croplands can be integrated into global biosphere models to simulate CO2 and water vapour regional fluxes, which should allow a better representation of those ecosystems for climate studies.

A comparison between the example reference biosphere model ERB 2B and a process-based model: simulation of a natural release scenario.

Science.gov (United States)

Almahayni, T

2014-12-01

The BIOMASS methodology was developed with the objective of constructing defensible assessment biospheres for assessing potential radiological impacts of radioactive waste repositories. To this end, a set of Example Reference Biospheres were developed to demonstrate the use of the methodology and to provide an international point of reference. In this paper, the performance of the Example Reference Biosphere model ERB 2B associated with the natural release scenario, discharge of contaminated groundwater to the surface environment, was evaluated by comparing its long-term projections of radionuclide dynamics and distribution in a soil-plant system to those of a process-based, transient advection-dispersion model (AD). The models were parametrised with data characteristic of a typical rainfed winter wheat crop grown on a sandy loam soil under temperate climate conditions. Three safety-relevant radionuclides, (99)Tc, (129)I and (237)Np with different degree of sorption were selected for the study. Although the models were driven by the same hydraulic (soil moisture content and water fluxes) and radiological (Kds) input data, their projections were remarkably different. On one hand, both models were able to capture short and long-term variation in activity concentration in the subsoil compartment. On the other hand, the Reference Biosphere model did not project any radionuclide accumulation in the topsoil and crop compartments. This behaviour would underestimate the radiological exposure under natural release scenarios. The results highlight the potential role deep roots play in soil-to-plant transfer under a natural release scenario where radionuclides are released into the subsoil. When considering the relative activity and root depth profiles within the soil column, much of the radioactivity was taken up into the crop from the subsoil compartment. Further improvements were suggested to address the limitations of the Reference Biosphere model presented in this paper

Analysis specifications for the CC3 biosphere model biotrac

Energy Technology Data Exchange (ETDEWEB)

Szekely, J G; Wojciechowski, L C; Stephens, M E; Halliday, H A

1994-12-01

The CC3 (Canadian Concept, generation 3) model BIOTRAC (Biosphere Transport and Consequences) describes the movement in the biosphere of releases from an underground disposal vault, and the consequent radiological dose to a reference individual. Concentrations of toxic substances in different parts of the biosphere are also calculated. BIOTRAC was created specifically for the postclosure analyses of the Environmental Impact Statement that AECL is preparing on the concept for disposal of Canada`s nuclear fuel waste. The model relies on certain assumptions and constraints on the system, which are described by Davis et al. Accordingly, great care must be exercised if BIOTRAC is used for any other purpose.

The IAEA Biomass programme: reference biospheres for long-term safety assessment of high level waste disposal facilities

International Nuclear Information System (INIS)

Metcalf, Phil; Crossland, Ian; Torres, Carlos; Crossland, Ian J.

2002-01-01

Phil Metcalf and Ian Crossland presented the IAEA Biomass project. Phil Metcalf explained that the Biomass project, begun in 1996, by an international forum organised by the IAEA was a very good exercise for exchanging information through technical meetings and documentation such as Biomass newsletters or CD Rom. Ian Crossland continued by giving a presentation of the Biomass theme 1 that concerns the radioactive waste disposal topic. Its objective was mainly to develop the reference biosphere methodology and to demonstrate its usefulness through some exercises related to the development of a practical set of example biospheres such as: 1. drinking water well, 2. agricultural irrigation, with a well source and 3. Set of natural groundwater discharges to natural, semi-natural systems. Input data would always change to accommodate a given repository simulation and location. Thus this project must be seen as a good exercise for the application of a methodology and should be considered as a good source of reference biospheres that might be viewed as a benchmark for comparison with site-specific safety assessments for a selected number of radionuclides. The main conclusion from the Biomass theme 1 project was that there appears to be an international consensus on preparing generic reference biospheres for postclosure safety assessment but waste management organisations should also consider the specific requirements of regulators and other stakeholders

Disruptive Event Biosphere Doser Conversion Factor Analysis

Energy Technology Data Exchange (ETDEWEB)

M. Wasiolek

2000-12-28

The purpose of this report was to document the process leading to, and the results of, development of radionuclide-, exposure scenario-, and ash thickness-specific Biosphere Dose Conversion Factors (BDCFs) for the postulated postclosure extrusive igneous event (volcanic eruption) at Yucca Mountain. BDCF calculations were done for seventeen radionuclides. The selection of radionuclides included those that may be significant dose contributors during the compliance period of up to 10,000 years, as well as radionuclides of importance for up to 1 million years postclosure. The approach documented in this report takes into account human exposure during three different phases at the time of, and after, volcanic eruption. Calculations of disruptive event BDCFs used the GENII-S computer code in a series of probabilistic realizations to propagate the uncertainties of input parameters into the output. The pathway analysis included consideration of different exposure pathway's contribution to the BDCFs. BDCFs for volcanic eruption, when combined with the concentration of radioactivity deposited by eruption on the soil surface, allow calculation of potential radiation doses to the receptor of interest. Calculation of radioactivity deposition is outside the scope of this report and so is the transport of contaminated ash from the volcano to the location of the receptor. The integration of the biosphere modeling results (BDCFs) with the outcomes of the other component models is accomplished in the Total System Performance Assessment (TSPA), in which doses are calculated to the receptor of interest from radionuclides postulated to be released to the environment from the potential repository at Yucca Mountain.

Nominal Performance Biosphere Dose Conversion Factor Analysis

International Nuclear Information System (INIS)

Wasiolek, M.

2000-01-01

The purpose of this report was to document the process leading to development of the Biosphere Dose Conversion Factors (BDCFs) for the postclosure nominal performance of the potential repository at Yucca Mountain. BDCF calculations concerned twenty-four radionuclides. This selection included sixteen radionuclides that may be significant nominal performance dose contributors during the compliance period of up to 10,000 years, five additional radionuclides of importance for up to 1 million years postclosure, and three relatively short-lived radionuclides important for the human intrusion scenario. Consideration of radionuclide buildup in soil caused by previous irrigation with contaminated groundwater was taken into account in the BDCF development. The effect of climate evolution, from the current arid conditions to a wetter and cooler climate, on the BDCF values was evaluated. The analysis included consideration of different exposure pathway's contribution to the BDCFs. Calculations of nominal performance BDCFs used the GENII-S computer code in a series of probabilistic realizations to propagate the uncertainties of input parameters into the output. BDCFs for the nominal performance, when combined with the concentrations of radionuclides in groundwater allow calculation of potential radiation doses to the receptor of interest. Calculated estimates of radionuclide concentration in groundwater result from the saturated zone modeling. The integration of the biosphere modeling results (BDCFs) with the outcomes of the other component models is accomplished in the Total System Performance Assessment (TSPA) to calculate doses to the receptor of interest from radionuclides postulated to be released to the environment from the potential repository at Yucca Mountain

An overview of biosphere modelling for the assessment of solid waste disposal

International Nuclear Information System (INIS)

Smith, G.M.

1990-01-01

The purpose of this paper is to discuss the role of biosphere modelling in relation to the overall assessment of disposal of solid radioactive waste. Model structure and data requirements are strongly influenced by a number of basic factors. Firstly, the alternative forms of safety criteria and regulatory requirements imply different end-points for biosphere models. Secondly, alternative disposal concepts can influence the significance of the biosphere as a barrier or diluting/concentrating feature affecting exposure of man. Thirdly, the range of different possibilities for release to the biosphere, including releases following intrusion, is very extensive. The requirements and state of development of biosphere models are discussed in relation to these factors along with methods being adopted to provide some expression of confidence in model results. 37 refs

Improvement of biosphere assessment methodology for performance assessment of geological disposal facility. 2. Outline

International Nuclear Information System (INIS)

Miki, Takahito; Yoshida, Hideji; Ikeda, Takao

2002-02-01

This report contains results on study of Geosphere-Biosphere Interface (GBI), development of biosphere assessment model for gaseous and volatile radionuclides, review of biosphere assessment and research on safety indicators. Regarding study of Geosphere-Biosphere Interface (GBI), FEP database for the Geosphere-Biosphere Transitions Zone (GBTZ) were compiled. Furthermore, release scenarios were identified from the FEP database, and review of conservativeness and robustness of the conceptual and mathematical models developed previously by JNC were undertaken. Regarding development of biosphere assessment model for gaseous and volatile radionuclides, the conceptual and mathematical models were developed, and it was confirmed that the impact of the exposure pathway regarding gas release to flux-to-dose conversion factor is small. Regarding review of biosphere assessment data, the parameters which were used on JNC second progress report were reviewed and classified using the biosphere data protocol categories. Furthermore, the data for key parameter (important but poorly characterized parameters) were revised. Regarding research on safety indicator, some kinds of safety indicators, especially for the non-radioactive contaminant and for the non-human biota, are reviewed. (author)

Ciliates and the rare biosphere: a review.

Science.gov (United States)

Dunthorn, Micah; Stoeck, Thorsten; Clamp, John; Warren, Alan; Mahé, Frédéric

2014-01-01

Here we provide a brief review of the rare biosphere from the perspective of ciliates and other microbial eukaryotes. We trace research on rarity from its lack of much in-depth focus in morphological and Sanger sequencing projects, to its central importance in analyses using high throughput sequencing strategies. The problem that the rare biosphere is potentially comprised of mostly errors is then discussed in the light of asking community-comparative, novel-diversity, and ecosystem-functioning questions. © 2014 The Author(s) Journal of Eukaryotic Microbiology © 2014 International Society of Protistologists.

An Estimate of the Total DNA in the Biosphere.

Science.gov (United States)

Landenmark, Hanna K E; Forgan, Duncan H; Cockell, Charles S

2015-06-01

Modern whole-organism genome analysis, in combination with biomass estimates, allows us to estimate a lower bound on the total information content in the biosphere: 5.3 × 1031 (±3.6 × 1031) megabases (Mb) of DNA. Given conservative estimates regarding DNA transcription rates, this information content suggests biosphere processing speeds exceeding yottaNOPS values (1024 Nucleotide Operations Per Second). Although prokaryotes evolved at least 3 billion years before plants and animals, we find that the information content of prokaryotes is similar to plants and animals at the present day. This information-based approach offers a new way to quantify anthropogenic and natural processes in the biosphere and its information diversity over time.

The biosphere: current status

International Nuclear Information System (INIS)

Thorne, M.C.

1988-06-01

This paper outlines the biosphere models and data required to assess the post-closure radiological impact of deep geological repositories for low and intermediate level radioactive wastes. It then goes on to show how these requirements are being met either within the Nirex Safety Assessment Research Programme or from other research programmes. (Author)

Energy flows of the biosphere

Energy Technology Data Exchange (ETDEWEB)

Gorshkov, V.G.

1980-01-01

Mankind consumes more than 90% of the animal production of the world. The locking of a significant part of the biosphere energy flow onto the anthropogenic chain leads to the dislodging of natural forms of organisms of the biosphere, change of its functioning and self-regulation. For the maintenance of stable existence of a small set of cultivated plants and domestic animals not forming the complete set indispensable for reaction to the change of natural conditions, man is compelled to follow the path of auxiliary investments of energy and to compensate for the destruction of closed circulations of food substances by the flow of fertilizers extracted from natural deposits. Energy assessments show the lack of realism of many projects for increasing the global energy flow in the anthropogenic channel by increasing the full flow of energy of the biosphere. To obtain the net production of the contemporary plowed field in hotbed on the basis of hydroponics there is required 2 x 10/sup 14/ watts of additional energy. To provide for the inflow of such an amount of energy (and also vast volumes of fresh water) presents extremely complicated problems. According to the author's calculations, in a provisional conversion of all production of green plants, all gas and petroleum and edible food with an efficiency equal to 1%, it is possible to provide food reserves equal to one annual harvest of the plowed fields of the world of 2 x 10/sup 9/ tons.

Summary of the IAEA's BIOMASS reference biosphere methodology for Environment Agency staff

International Nuclear Information System (INIS)

Coughtrey, P.

2001-01-01

The International Atomic Energy Agency (IAEA) programme on BIOsphere Modelling and ASSessment (BIOMASS) was launched in October 1996, and will complete during 2001. The BIOMASS programme aimed to develop and apply a methodology for defining biospheres for practical radiological assessment of releases from radioactive waste disposal. This report provides a summary description of the BIOMASS methodology. The BIOMASS methodology has been developed through international collaboration and represents a major milestone in biosphere modelling. It provides an approach supported by a wide range of developers, regulators, biosphere experts and safety assessment specialists. The Environment Agency participated actively in the BIOMASS programme

World campaign for the biosphere

Energy Technology Data Exchange (ETDEWEB)

Worthington, E.B.

1982-07-01

Four aims are included in the Draft Declaration about the Champaign for The Biosphere; 1) education and allied activities, 2) scientific understanding, 3) practical activities, and 4) accommodation of humanity to The Biosphere. There is a strong case for application to practical affairs of what is already known. The campaign might focus initially on problems that illustrate changing attitudes which are the result of research and experience. Examples include the Green revolution in agriculture and, in engineering, the swing of changing attitudes to the primary and ancillary effects of large projects for hydro-power and irrigation. The need for conservation of natural resources by rational, ecologically wise use is stressed. Educational and medical programs for planned parenthood are already available. The problem will be to boost them to top priority in the countries that need them most. (JMT)

The biosphere: Problems and solutions; Proceedings of the Miami International Symposium on the Biosphere, Miami Beach, FL, April 23, 24, 1984

Science.gov (United States)

Veziroglu, T. N.

The objective of the Miami International Symposium on the Biosphere was to provide a forum for the presentation of the latest research findings on the environmental effects of human activities. The topics discussed are related to biosphere reserves, environmental aspects of hydrocarbon fuels, radioactivity and nuclear waste, land management, acid rains, water quality, water resources, coastal resources management, the pollution of rivers, industrial waste, economic development and the environment, health hazards and solutions, endangered species, environmentally compatible systems, space pollution, and global considerations. Attention is given to questions regarding global security and sustainable development, environethics as a global strategy for environmental quality, a gestalt approach to the environment, potential indicators for monitoring biosphere reserves, a review of regional impacts associated with the development of U.S. synthetic fuel resources, water resources in the Soviet Union, and pollution-free pesticides.

Olkiluoto biosphere description 2006

International Nuclear Information System (INIS)

Haapanen, R.; Aro, L.; Ilvesniemi, H.; Kareinen, T.; Kirkkala, T.; Mykrae, S.; Turkki, H.; Lahdenperae, A.-M.; Ikonen, A.T.K.

2007-02-01

This report summarises the current knowledge of the biosphere of Olkiluoto, and it is the first Biosphere Description Report. The elements considered were climate, topography, land use, overburden, terrestrial vegetation and fauna and sea flora, fauna and water. The principal aim was to present a synthesis of the present state (now to 2020) and the main features of past evolution of the biosphere at the site using currently available data. The lack of site specific parameters and their importance was discussed. Conceptual ecosystem models are presented for land and sea. Currently available data made it possible to calculate the biomass of the terrestrial vegetation and further convert it to carbon. In the case of terrestrial animals, preliminary figures are given for moose alone due to lack of sitespecific data. For the same reason, the sea ecosystem model was not quantified within this work. The ecosystems on Olkiluoto do not deviate from the surrounding areas. Since mires are few on Olkiluoto, forests are the most important land ecosystem. However, coastal areas are the transition zones between land and sea, and also potential sites for deep groundwater discharge. The major interest concerning aquatic ecosystems was laid on four future lakes potentially developing from the sea due to the land up-lift. Current sea sediments near Olkiluoto are future land areas, and thus very important. Spatially, the forest ecosystems of Olkiluoto are now most comprehensively covered, while the temporal coverage is highest in sea ecosystems. Lack of data is greatest in terrestrial fauna and sea sediments. During this work, the system boundaries were crossed and the use of data over disciplines was started. The data were mostly in agreement, but some discrepancies were detected. To solve these, and to supplement the existing data, some recommendations were given. (orig.)

Management effectiveness and land cover change in dynamic cultural landscapes-assessing a central European biosphere reserve

DEFF Research Database (Denmark)

Ohnesorge, B.; Plieninger, Tobias; Hostert, P.

2013-01-01

Protected areas are a central pillar of efforts to safeguard biodiversity and ecosystem services, but their contribution to the conservation and management of European cultural landscapes that have complex spatial-temporal dynamics is unclear. The conservation strategy of biosphere reserves aims...... at integrating biodiversity and ecosystem service conservation with economic development by designating zones of differing protection and use intensities. It is applied worldwide to protect and manage valuable cultural landscapes. Using the example of a German biosphere reserve, we developed a framework...... in the reserve's core, buffer, and transition zones and in a surrounding reference area by means of a geographical information system. (Un-)desirable key processes related to management aims were defined and compared for the various zones. We found that-despite an overall land cover persistence of approximately...

Deep-biosphere consortium of fungi and prokaryotes in Eocene subseafloor basalts.

Science.gov (United States)

Bengtson, S; Ivarsson, M; Astolfo, A; Belivanova, V; Broman, C; Marone, F; Stampanoni, M

2014-11-01

The deep biosphere of the subseafloor crust is believed to contain a significant part of Earth's biomass, but because of the difficulties of directly observing the living organisms, its composition and ecology are poorly known. We report here a consortium of fossilized prokaryotic and eukaryotic micro-organisms, occupying cavities in deep-drilled vesicular basalt from the Emperor Seamounts, Pacific Ocean, 67.5 m below seafloor (mbsf). Fungal hyphae provide the framework on which prokaryote-like organisms are suspended like cobwebs and iron-oxidizing bacteria form microstromatolites (Frutexites). The spatial inter-relationships show that the organisms were living at the same time in an integrated fashion, suggesting symbiotic interdependence. The community is contemporaneous with secondary mineralizations of calcite partly filling the cavities. The fungal hyphae frequently extend into the calcite, indicating that they were able to bore into the substrate through mineral dissolution. A symbiotic relationship with chemoautotrophs, as inferred for the observed consortium, may be a pre-requisite for the eukaryotic colonization of crustal rocks. Fossils thus open a window to the extant as well as the ancient deep biosphere. © 2014 The Authors. Geobiology Published by John Wiley & Sons Ltd.

Factual biosphere database for Dounreay and the surrounding area

International Nuclear Information System (INIS)

Broderick, M.A.

1991-12-01

This report documents from open published sources a factual database appropriate to the Dounreay region including the coastal marine environment for present day biosphere conditions. A detailed description of the present day environment in the Dounreay area is provided. This includes a description of the natural environment and climate. Site specific data required for biosphere modelling are also outlined. (author)

Factual biosphere database for Dounreay and the surrounding area

Energy Technology Data Exchange (ETDEWEB)

Broderick, M A [ANS Consultants Ltd., Epsom (United Kingdom)

1991-12-01

This report documents from open published sources a factual database appropriate to the Dounreay region including the coastal marine environment for present day biosphere conditions. A detailed description of the present day environment in the Dounreay area is provided. This includes a description of the natural environment and climate. Site specific data required for biosphere modelling are also outlined. (author).

Factual biosphere database for Sellafield and the surrounding area

Energy Technology Data Exchange (ETDEWEB)

Broderick, M A [ANS Consultants Ltd., Epsom (United Kingdom)

1991-12-01

This report documents from open published sources a factual database appropriate to the Sellafield region including the coastal marine environment for present day biosphere conditions. A detailed description of the present day environment in the Sellafield area is provided. This includes a description of the natural environment and climate. Site specific data required for biosphere modelling are also outlined. (author).

Factual biosphere database for Sellafield and the surrounding area

International Nuclear Information System (INIS)

Broderick, M.A.

1991-12-01

This report documents from open published sources a factual database appropriate to the Sellafield region including the coastal marine environment for present day biosphere conditions. A detailed description of the present day environment in the Sellafield area is provided. This includes a description of the natural environment and climate. Site specific data required for biosphere modelling are also outlined. (author)

Group dynamics challenges: Insights from Biosphere 2 experiments

Science.gov (United States)

Nelson, Mark; Gray, Kathelin; Allen, John P.

2015-07-01

Successfully managing group dynamics of small, physically isolated groups is vital for long duration space exploration/habitation and for terrestrial CELSS (Controlled Environmental Life Support System) facilities with human participants. Biosphere 2 had important differences and shares some key commonalities with both Antarctic and space environments. There were a multitude of stress factors during the first two year closure experiment as well as mitigating factors. A helpful tool used at Biosphere 2 was the work of W.R. Bion who identified two competing modalities of behavior in small groups. Task-oriented groups are governed by conscious acceptance of goals, reality-thinking in relation to time and resources, and intelligent management of challenges. The opposing unconscious mode, the "basic-assumption" ("group animal") group, manifests through Dependency/Kill the Leader, Fight/Flight and Pairing. These unconscious dynamics undermine and can defeat the task group's goal. The biospherians experienced some dynamics seen in other isolated teams: factions developing reflecting personal chemistry and disagreements on overall mission procedures. These conflicts were exacerbated by external power struggles which enlisted support of those inside. Nevertheless, the crew evolved a coherent, creative life style to deal with some of the deprivations of isolation. The experience of the first two year closure of Biosphere 2 vividly illustrates both vicissitudes and management of group dynamics. The crew overrode inevitable frictions to creatively manage both operational and research demands and opportunities of the facility, thus staying 'on task' in Bion's group dynamics terminology. The understanding that Biosphere 2 was their life support system may also have helped the mission to succeed. Insights from the Biosphere 2 experience can help space and remote missions cope successfully with the inherent challenges of small, isolated crews.

Group dynamics challenges: Insights from Biosphere 2 experiments.

Science.gov (United States)

Nelson, Mark; Gray, Kathelin; Allen, John P

2015-07-01

Successfully managing group dynamics of small, physically isolated groups is vital for long duration space exploration/habitation and for terrestrial CELSS (Controlled Environmental Life Support System) facilities with human participants. Biosphere 2 had important differences and shares some key commonalities with both Antarctic and space environments. There were a multitude of stress factors during the first two year closure experiment as well as mitigating factors. A helpful tool used at Biosphere 2 was the work of W.R. Bion who identified two competing modalities of behavior in small groups. Task-oriented groups are governed by conscious acceptance of goals, reality-thinking in relation to time and resources, and intelligent management of challenges. The opposing unconscious mode, the "basic-assumption" ("group animal") group, manifests through Dependency/Kill the Leader, Fight/Flight and Pairing. These unconscious dynamics undermine and can defeat the task group's goal. The biospherians experienced some dynamics seen in other isolated teams: factions developing reflecting personal chemistry and disagreements on overall mission procedures. These conflicts were exacerbated by external power struggles which enlisted support of those inside. Nevertheless, the crew evolved a coherent, creative life style to deal with some of the deprivations of isolation. The experience of the first two year closure of Biosphere 2 vividly illustrates both vicissitudes and management of group dynamics. The crew overrode inevitable frictions to creatively manage both operational and research demands and opportunities of the facility, thus staying 'on task' in Bion's group dynamics terminology. The understanding that Biosphere 2 was their life support system may also have helped the mission to succeed. Insights from the Biosphere 2 experience can help space and remote missions cope successfully with the inherent challenges of small, isolated crews. Copyright © 2015 The Committee on

Rewiring food systems to enhance human health and biosphere stewardship

Science.gov (United States)

Gordon, Line J.; Bignet, Victoria; Crona, Beatrice; Henriksson, Patrik J. G.; Van Holt, Tracy; Jonell, Malin; Lindahl, Therese; Troell, Max; Barthel, Stephan; Deutsch, Lisa; Folke, Carl; Jamila Haider, L.; Rockström, Johan; Queiroz, Cibele

2017-10-01

Food lies at the heart of both health and sustainability challenges. We use a social-ecological framework to illustrate how major changes to the volume, nutrition and safety of food systems between 1961 and today impact health and sustainability. These changes have almost halved undernutrition while doubling the proportion who are overweight. They have also resulted in reduced resilience of the biosphere, pushing four out of six analysed planetary boundaries across the safe operating space of the biosphere. Our analysis further illustrates that consumers and producers have become more distant from one another, with substantial power consolidated within a small group of key actors. Solutions include a shift from a volume-focused production system to focus on quality, nutrition, resource use efficiency, and reduced antimicrobial use. To achieve this, we need to rewire food systems in ways that enhance transparency between producers and consumers, mobilize key actors to become biosphere stewards, and re-connect people to the biosphere.

Biosphere scenario development. An interim report of an SKI, SSI, SKB working group

International Nuclear Information System (INIS)

1989-11-01

The Swedish Nuclear Power Inspectorate and the Swedish Nuclear Fuel and Waste Management Co have initiated a project for the development of scenarios for the behaviour of radionuclides in high level waste following deep geological disposal. The main objective is to develop a general consensus of scenarios and conceptual models. Within the project a biosphere scenarios working group was initiated to consider specific questions of the biosphere. This report describes the results of the group's deliberations up to the end of July 1989. A methodology is presented for the development of biosphere scenarios which may be considered alongside scenarios for radionuclide behaviour in the near field and geosphere. Two major biosphere elements affecting processes in the surface environment have been recognised, climate and development. Alternative states for climate and level of development are suggested and each combination can be considered with one or more of a range of biosphere receptors, such as a river or a lake. The features, events and processes relevant to each receptor are presented. Consideration is then given to biosphere assumptions for both gradual and direct releases from the geosphere, as well as biosphere effects on the repository near field or geosphere. The amount of screening which can be done at this stage to limit the number of biosphere scenarios is small. However, considerable potential exists once more details are available for geosphere release scenarios. It may be appropriate to further develop biosphere scenarios, specific to each geosphere release scenario. It may also be appropriate to consider scenarios specifically in relation to the individual radionuclides which dominate geosphere releases. Both these possibilities could result in considerably reduced requirements for calculations

Coupled Climate-Economy-Biosphere (CoCEB) model - Part 1: Abatement share and investment in low-carbon technologies

Science.gov (United States)

Ogutu, K. B. Z.; D'Andrea, F.; Ghil, M.; Nyandwi, C.; Manene, M. M.; Muthama, J. N.

2015-04-01

The Coupled Climate-Economy-Biosphere (CoCEB) model described herein takes an integrated assessment approach to simulating global change. By using an endogenous economic growth module with physical and human capital accumulation, this paper considers the sustainability of economic growth, as economic activity intensifies greenhouse gas emissions that in turn cause economic damage due to climate change. Different types of fossil fuels and different technologies produce different volumes of carbon dioxide in combustion. The shares of different fuels and their future evolution are not known. We assume that the dynamics of hydrocarbon-based energy share and their replacement with renewable energy sources in the global energy balance can be modeled into the 21st century by use of logistic functions. Various climate change mitigation policy measures are considered. While many integrated assessment models treat abatement costs merely as an unproductive loss of income, we consider abatement activities also as an investment in overall energy efficiency of the economy and decrease of overall carbon intensity of the energy system. The paper shows that these efforts help to reduce the volume of industrial carbon dioxide emissions, lower temperature deviations, and lead to positive effects in economic growth.

User's guide to the biosphere code ECOS

International Nuclear Information System (INIS)

Kane, P.; Thorne, M.C.

1984-10-01

This report constitutes the user's guide to the biosphere model ECOS and provides a detailed description of the processes modelled and mathematical formulations used. The FORTRAN code ECOS is an equilibrium-type compartmental biosphere code. ECOS was designed with the objective of producing a general but comprehensive code for use in the assessment of the radiological impact of unspecified geological repositories for radioactive waste. ECOS transforms the rate of release of activity from the geosphere to the rate of accumulation of weighted committed effective dose equivalent (dose). Both maximum individual dose (critical group dose) and collective dose rates may be computed. (author)

Ecology and exploration of the rare biosphere.

Science.gov (United States)

Lynch, Michael D J; Neufeld, Josh D

2015-04-01

The profound influence of microorganisms on human life and global biogeochemical cycles underlines the value of studying the biogeography of microorganisms, exploring microbial genomes and expanding our understanding of most microbial species on Earth: that is, those present at low relative abundance. The detection and subsequent analysis of low-abundance microbial populations—the 'rare biosphere'—have demonstrated the persistence, population dynamics, dispersion and predation of these microbial species. We discuss the ecology of rare microbial populations, and highlight molecular and computational methods for targeting taxonomic 'blind spots' within the rare biosphere of complex microbial communities.

Biosphere transport of radionuclides. First modelling by using a selected example

International Nuclear Information System (INIS)

Bundi, A.

1984-12-01

The dispersion of radionuclides in the biosphere and their uptake by man via various nutritional pathways is studied using a compartment model. The sample environment is the area of the lower Limmat and Aare valleys. General considerations of the compartmental description of the biosphere are made. The problem of the description of surface features, in particular soil, sediment and water, is studied in detail using the code BIOPATH. This study is intended to be an example of how a model of the biosphere could be constructed. It is shown that this is a reasonable model to calculate the spreading of radionuclides in the biosphere and that it indicates the relative significance of individual compartments, pathways and radionuclides. Calculated values of doses to man, however, should not be used as reference data for safety analyses. (author)

Reference biospheres for the long term safety assessment of radioactive waste disposal facilities

International Nuclear Information System (INIS)

Crossland, I.G.; Torres, C.

2002-01-01

Regulatory guidance on the safety assessment of radioactive waste disposals usually requires the consequences of any radionuclide releases to be considered in terms of their potential impact on human health. This requires consideration of the prevailing biosphere and the habits of the potentially exposed humans within it. However, it could take many thousands of years for migrating radionuclides to reach the surface environment. In these circumstances, an assessment model that was based on the present-day biosphere could be inappropriate while future biospheres would be unpredictable. These and other considerations suggest that a standardised, or reference biosphere, approach may be useful. Theme 1 of the IAEA BIOMASS project was established to develop the concept of reference biospheres into a practical system that can be applied to the assessment of the long term safety of geological disposal facilities for radioactive waste. The technical phase of the project lasted for four years until November 2000 and brought together disparate interests from many countries including waste disposal agencies, regulators and technical experts. Building on the experience from earlier BIOMOVS projects, a methodology was constructed for the logical and defensible construction of mathematical biosphere models that can be used in the total system performance assessment of radioactive waste disposal. The methodology was then further developed through the creation of a series of BIOMASS Example Reference Biospheres ('Examples'). These are stylised biosphere models that, in addition to illustrating the methodology, are intended to be useful assessment tools in their own right. (author)

The enhancement of a biosphere code for use in the assessment of deep repositories for radioactive waste

International Nuclear Information System (INIS)

Ashton, J.; Little, R.H.

1991-01-01

A disposal system for radioactive waste is conventionally considered to consist of the engineered barriers of the repository, the geosphere and the surface environment or biosphere. Computer codes have been developed to assist in assessing the impact of radionuclides migrating from the repository through the disposal system. Codes have been developed to represent the repository, the geosphere and the biosphere. The fundamental role of the biosphere codes is, for radionuclide inputs, to estimate the dose, or probability distribution function of dose, to a maximally exposed individual as a function of time. In the United Kingdom, the primary target for long-term radiological impacts from a single disposal facility is that the risk of fatal cancer to an individual in any one year should not exceed one in a million at any time. The recent revival of interest in the UK in the deep disposal of radioactive waste has resulted in the need for the risk to be estimated over timescales up to a million years, since a deep geologic repository might be able to withstand the effects of several future glacial episodes. Biosphere modelling for deep disposal of radioactive waste poses particular problems since the surface environment is expected to evolve as a result of changes in climatic conditions. Consequently the effect of climate induced changes in geomorphology, land use and sea level on the calculated risk have to be considered. This paper outlines the development of a new version of the dynamic biosphere model DECOS, which was developed originally in the context of shallow site assessments. The new version of the code, called DECOS-MG, is capable of simulating the effect of multiple glacial cycles and changes in sea level. (14 refs., 3 figs., 2 tabs.)

Ecotourism and its effects on wildlife of Pachmarhi Biosphere Reserve

African Journals Online (AJOL)

use

“increase in international tourist arrivals from 25 million in. 1950 to 664 ... In its most basic sense, tourism can be ... sustainable use of wildlife in the Manu Biosphere ... ecotourism as it helps to educate people on the ... Sci. Technol. Table 1. Madai entrance to Pachmarhi Biosphere Reserve. .... in educational institutions.

Models for dose assessments. Modules for various biosphere types

Energy Technology Data Exchange (ETDEWEB)

Bergstroem, U.; Nordlinder, S.; Aggeryd, I. [Studsvik Eco and Safety AB, Nykoeping (Sweden)

1999-12-01

The main objective of this study was to provide a basis for illustrations of yearly dose rates to the most exposed individual from hypothetical leakages of radionuclides from a deep bedrock repository for spent nuclear fuel and other radioactive waste. The results of this study will be used in the safety assessment SR 97 and in a study on the design and long-term safety for a repository planned to contain long-lived low and intermediate level waste. The repositories will be designed to isolate the radionuclides for several hundred thousands of years. In the SR 97 study, however, hypothetical scenarios for leakage are postulated. Radionuclides are hence assumed to be transported in the geosphere by groundwater, and probably discharge into the biosphere. This may occur in several types of ecosystems. A number of categories of such ecosystems were identified, and turnover of radionuclides was modelled separately for each ecosystem. Previous studies had focused on generic models for wells, lakes and coastal areas. These models were, in this study, developed further to use site-specific data. In addition, flows of groundwater, containing radionuclides, to agricultural land and peat bogs were considered. All these categories are referred to as modules in this report. The forest ecosystems were not included, due to a general lack of knowledge of biospheric processes in connection with discharge of groundwater in forested areas. Examples of each type of module were run with the assumption of a continuous annual release into the biosphere of 1 Bq for each radionuclide during 10 000 years. The results are presented as ecosystem specific dose conversion factors (EDFs) for each nuclide at the year 10 000, assuming stationary ecosystems and prevailing living conditions and habits. All calculations were performed with uncertainty analyses included. Simplifications and assumptions in the modelling of biospheric processes are discussed. The use of modules may be seen as a step

Models for dose assessments. Modules for various biosphere types

International Nuclear Information System (INIS)

Bergstroem, U.; Nordlinder, S.; Aggeryd, I.

1999-12-01

The main objective of this study was to provide a basis for illustrations of yearly dose rates to the most exposed individual from hypothetical leakages of radionuclides from a deep bedrock repository for spent nuclear fuel and other radioactive waste. The results of this study will be used in the safety assessment SR 97 and in a study on the design and long-term safety for a repository planned to contain long-lived low and intermediate level waste. The repositories will be designed to isolate the radionuclides for several hundred thousands of years. In the SR 97 study, however, hypothetical scenarios for leakage are postulated. Radionuclides are hence assumed to be transported in the geosphere by groundwater, and probably discharge into the biosphere. This may occur in several types of ecosystems. A number of categories of such ecosystems were identified, and turnover of radionuclides was modelled separately for each ecosystem. Previous studies had focused on generic models for wells, lakes and coastal areas. These models were, in this study, developed further to use site-specific data. In addition, flows of groundwater, containing radionuclides, to agricultural land and peat bogs were considered. All these categories are referred to as modules in this report. The forest ecosystems were not included, due to a general lack of knowledge of biospheric processes in connection with discharge of groundwater in forested areas. Examples of each type of module were run with the assumption of a continuous annual release into the biosphere of 1 Bq for each radionuclide during 10 000 years. The results are presented as ecosystem specific dose conversion factors (EDFs) for each nuclide at the year 10 000, assuming stationary ecosystems and prevailing living conditions and habits. All calculations were performed with uncertainty analyses included. Simplifications and assumptions in the modelling of biospheric processes are discussed. The use of modules may be seen as a step

Community Assembly Processes of the Microbial Rare Biosphere.

Science.gov (United States)

Jia, Xiu; Dini-Andreote, Francisco; Falcão Salles, Joana

2018-03-14

Our planet teems with microorganisms that often present a skewed abundance distribution in a local community, with relatively few dominant species coexisting alongside a high number of rare species. Recent studies have demonstrated that these rare taxa serve as limitless reservoirs of genetic diversity, and perform disproportionate types of functions despite their low abundances. However, relatively little is known about the mechanisms controlling rarity and the processes promoting the development of the rare biosphere. Here, we propose the use of multivariate cut-offs to estimate rare species and phylogenetic null models applied to predefined rare taxa to disentangle the relative influences of ecoevolutionary processes mediating the assembly of the rare biosphere. Importantly, the identification of the factors controlling rare species assemblages is critical for understanding the types of rarity, how the rare biosphere is established, and how rare microorganisms fluctuate over spatiotemporal scales, thus enabling prospective predictions of ecosystem responses. Copyright © 2018 Elsevier Ltd. All rights reserved.

A biosphere model for use in the SKI Project SITE-94

International Nuclear Information System (INIS)

Barrdahl, R.A.G.

1995-04-01

A simple biosphere model has been designed for use in the SKI Project SITE-94 related to a hypothetical repository for spent nuclear fuel on the island of Aespoe near Oskarshamn in southern Sweden. The model provides results in terms of radiation dose per Bq/y, unless otherwise indicated, and results will thus have to be scaled with actual flux of radionuclides per year entering the primary biosphere recipients. The model does not include radioactive decay as there is assumed no delay in the model system, except for where explicitly mentioned. Specifically, no radioactive transitions resulting in daughter nuclides are considered. Calculated yearly individual and population committed (50 years) radiation doses to man are expressed in terms of Sv/y and radiation dose rates to fish are expressed as mSv/h. Calculated radiation doses resulting from the present biosphere model are hypothetical, and should under no circumstances be considered as real. Neither should they be used as quantitative information for decision purposes. The biosphere model is of a rough and primitive character and its precision, relative to the real biosphere in the surroundings of Aespoe is envisaged to be several orders of magnitude

The biosphere today and tomorrow in the SFR area

Energy Technology Data Exchange (ETDEWEB)

Kautsky, Ulrik (ed.)

2001-06-01

This report is a compilation of the work done mainly in the SAFE project for the biosphere from about 14 reports. The SAFE project is the updated safety analysis of SFR-1, the LLW and ILW repository at Forsmark. The aim of the report is to summarize the available information about the present-day biosphere in the area surrounding SFR and to use this information, together with information about the previous development of the biosphere, to predict the future development of the area in a more comparable way than the underlying reports. The data actually used for the models have been taken from the original reports which also justify or validate the data. The report compiles information about climate, oceanography, landscape, sedimentation, shoreline displacement, marine, lake and terrestrial ecosystems.

The biosphere today and tomorrow in the SFR area

International Nuclear Information System (INIS)

Kautsky, Ulrik

2001-06-01

This report is a compilation of the work done mainly in the SAFE project for the biosphere from about 14 reports. The SAFE project is the updated safety analysis of SFR-1, the LLW and ILW repository at Forsmark. The aim of the report is to summarize the available information about the present-day biosphere in the area surrounding SFR and to use this information, together with information about the previous development of the biosphere, to predict the future development of the area in a more comparable way than the underlying reports. The data actually used for the models have been taken from the original reports which also justify or validate the data. The report compiles information about climate, oceanography, landscape, sedimentation, shoreline displacement, marine, lake and terrestrial ecosystems

Human aspirations, environmental care, and the much-needed World Decade of the Biosphere

Energy Technology Data Exchange (ETDEWEB)

1982-04-01

An editorial dealing with a world-wide need to support a common cause such as the maintenance of our biosphere as our home and planetary life-support is presented. The planned World Decade of the Biosphere which is intended to inform and educate people throughout the world about the biosphere and man's relationship to it is discussed. (KRM)

Sensitivity analysis of biospheric behaviour of radionuclides released from nuclear waste repositories

International Nuclear Information System (INIS)

Korhonen, R.; Savolainen, I.; Suolanen, V.

1985-01-01

Sensitivity studies of biospheric behaviour of radionuclides released from a planned spent nuclear fuel repository are performed. Sensitivity of radionuclide concentrations in biosphere and that of radiation doses to solubility of nuclides, to sedimentation rate and to intercompartmental water exchange are studied. Solubility has pronounced effect on the sedimentation on the local scale, and in general, sediment sinks were found to be of major importance in the biospheric behaviour of radionuclides. (author)

Development of Integrated Simulation System for Helical Plasmas

Energy Technology Data Exchange (ETDEWEB)

Nakamura, Y.; Yokoyama, M.; Nakajima, N.; Fukuyama, A.; Watanabe, K. Y.; Funaba, H.; Suzuki, Y.; Murakami, S.; Ida, K.; Sakakibara, S.; Yamada, H.

2005-07-01

Recent progress of computers (parallel/vector-parallel computers, PC clusters, for example) and numerical codes for helical plasmas like three-dimensional MHD equilibrium codes, combined with the development of the plasma diagnostics technique, enable us to do the detailed theoretical analyses of the individual experimental observations. Now, it is pointed out that the experimental data analysis from the viewpoints of integrated physics is an important issue to understand the confinement physics globally. In addition to that, there are international movements towards the integrated numerical simulation study. One is several proposals of integrated modeling of burning tokamak plasmas, motivated by the ITER activity. The integrated numerical simulation will be a good help to draw up new experimental plans especially for burning plasma experiments. Another movement is international collaborations on the confinement database and neoclassical transport in helical plasmas/stellarators. These backgrounds motivate us to start the development of the integrated simulation system which has a modular structure and user-friendly interfaces. The integrated simulation system, which is based on the hierarchical and multi-scale (time and space) modeling, will also be a platform for theoreticians to test their own model such as turbulent transport model. In this paper, we will show the strategy of developing the integrated simulation system and present status of the development. Especially, we discuss the modeling of the time evolution of the plasma net current profile, which is equivalent to the time evolution of the rotational transform profile, in the resistive time scale. (Author)

An integrated computational tool for precipitation simulation

Science.gov (United States)

Cao, W.; Zhang, F.; Chen, S.-L.; Zhang, C.; Chang, Y. A.

2011-07-01

Computer aided materials design is of increasing interest because the conventional approach solely relying on experimentation is no longer viable within the constraint of available resources. Modeling of microstructure and mechanical properties during precipitation plays a critical role in understanding the behavior of materials and thus accelerating the development of materials. Nevertheless, an integrated computational tool coupling reliable thermodynamic calculation, kinetic simulation, and property prediction of multi-component systems for industrial applications is rarely available. In this regard, we are developing a software package, PanPrecipitation, under the framework of integrated computational materials engineering to simulate precipitation kinetics. It is seamlessly integrated with the thermodynamic calculation engine, PanEngine, to obtain accurate thermodynamic properties and atomic mobility data necessary for precipitation simulation.

Data management at Biosphere 2 center

Science.gov (United States)

McCreary, Leone F.

1997-01-01

Throughout the history of Biosphere 2, the collecting and recording of biological data has been sporadic. Currently no active effort to administer and record regular biological surveys is being made. Also, there is no central location, such as an on-site data library, where all records from various studies have been archived. As a research institute, good, complete data records are at the core of all Biosphere 2's scientific endeavors. It is therefore imperative that an effective data management system be implemented within the management and research departments as soon as possible. Establishing this system would require three general phases: (1) Design/implement a new archiving/management program (including storage, cataloging and retrieval systems); (2) Organize and input baseline and intermediate data from existing archives; and (3) Maintain records by inputting new data.

Parallel sparse direct solver for integrated circuit simulation

CERN Document Server

Chen, Xiaoming; Yang, Huazhong

2017-01-01

This book describes algorithmic methods and parallelization techniques to design a parallel sparse direct solver which is specifically targeted at integrated circuit simulation problems. The authors describe a complete flow and detailed parallel algorithms of the sparse direct solver. They also show how to improve the performance by simple but effective numerical techniques. The sparse direct solver techniques described can be applied to any SPICE-like integrated circuit simulator and have been proven to be high-performance in actual circuit simulation. Readers will benefit from the state-of-the-art parallel integrated circuit simulation techniques described in this book, especially the latest parallel sparse matrix solution techniques. · Introduces complicated algorithms of sparse linear solvers, using concise principles and simple examples, without complex theory or lengthy derivations; · Describes a parallel sparse direct solver that can be adopted to accelerate any SPICE-like integrated circuit simulato...

Biosphere processes affecting environmnetal impacts of hazardous wastes

International Nuclear Information System (INIS)

Watkins, B.; Broderick, M.

1991-01-01

ANS Consultants Limited has reviewed and assessed a number of biosphere processes which affect the environmental impact of hazardous waste disposal. Processes examined have included the long-term effects of climate change on biosphere characteristics and the transport of toxic materials in food chains; the role of soil animals and plants roots in cycling elements from depth to the soil surface; volatisation mechanisms; the transport of elements in soil with particular reference to erosion and resuspension; mechanisms for foliar contamination via irrigation waters; and organic matter decomposition in varying environmental conditions. (au)

The General Laws of Chemical Elements Composition Dynamics in the Biosphere

Science.gov (United States)

Korzh, Vyacheslav D.

2013-04-01

The key point of investigation of the specificity of the biosphere elemental composition formation is determination of patterns of redistribution of elemental average concentrations among various phases, like solid - liquid ( the lithosphere - the hydrosphere), which occurs as a result of a global continuous processing of inert matter by living substances. Our task here is to investigate this process in the system "lithosphere - hydrosphere" in view of the integrated involvement of living material in it. This process is most active in biogeochemical barriers, i.e. in places of "the life condensation" and runs under a nonlinear regularity that has been unknown before. It is established that this process results in a general relative increase in concentrations of chemical elements in the solid phase in proportion as their prevalence in the environment is reduced. This process running in various natural systems has practically the same parameter of nonlinearity (v) approximately equal to 0.7. For proto-lithosphere -"living material" - soil v = 0.75. For river - "living material" - ocean v = 0.67. For the contemporary factual awareness level these estimations of nonlinearity indices are practically negligible. Hence, it is for the first time that the existence of a universal constant of nonlinearity of elemental composition evolution in the biosphere has been proved and its quantitative evaluation has been made. REFERENCES 1. Korzh V.D. 1974. Some general laws governing the turnover of substance within the ocean-atmosphere-continent-ocean cycle. // Journal de Recherches Atmospheriques. Vol. 8. P. 653-660. 2. Korzh V.D. 2008. The general laws in the formation of the elemental composition of the Hydrosphere and Biosphere.// J. Ecologica, Vol. XV, P. 13-21. 3. Korzh V.D. 2012. Determination of general laws of elemental composition in Hydrosphere // Water: chemistry & ecology, Journal of water science and its practical application. # 1, P.56-62.

Some viewpoints on reference biospheres in Finnish performance assessments

International Nuclear Information System (INIS)

Rasilainen, K.; Kattilakoski, E.; Suolanen, V.; Vieno, T.; Vuori, S.

2002-01-01

Viewpoints are presented concerning biosphere studies in performance assessments of nuclear waste disposal. The points are based on experiences from several Finnish performance assessments. The latest performance assessment for spent fuel disposal, TILA-99, was considered in the Decision in Principle process for the site selection of the repository. The points given are also based on experiences from participation in international projects dealing with biosphere modelling, for instance BIOMOVS and BIOMASS. (author)

Dating the Anthropocene: Towards an empirical global history of human transformation of the terrestrial biosphere

Directory of Open Access Journals (Sweden)

Erle C. Ellis

2013-12-01

Full Text Available Abstract Human use of land is a major cause of the global environmental changes that define the Anthropocene. Archaeological and paleoecological evidence confirm that human populations and their use of land transformed ecosystems at sites around the world by the late Pleistocene and historical models indicate this transformation may have reached globally significant levels more than 3000 years ago. Yet these data in themselves remain insufficient to conclusively date the emergence of land use as a global force transforming the biosphere, with plausible dates ranging from the late Pleistocene to AD 1800. Conclusive empirical dating of human transformation of the terrestrial biosphere will require unprecedented levels of investment in sustained interdisciplinary collaboration and the development of a geospatial cyberinfrastructure to collate and integrate the field observations of archaeologists, paleoecologists, paleoenvironmental scientists, environmental historians, geoscientists, geographers and other human and environmental scientists globally from the Pleistocene to the present. Existing field observations may yet prove insufficient in terms of their spatial and temporal coverage, but by assessing these observations within a spatially explicit statistically robust global framework, major observational gaps can be identified, stimulating data gathering in underrepresented regions and time periods. Like the Anthropocene itself, building scientific understanding of the human role in shaping the biosphere requires both sustained effort and leveraging the most powerful social systems and technologies ever developed on this planet.

Application of the Biosphere Assessment Methodology to the ENRESA, 1997 Performance and Safety Assessment

International Nuclear Information System (INIS)

Pinedo, P.; Simon, I.; Aguero, A.

1998-01-01

For several years CIEMAT has been developing for ENRESA knowledge and tools to support the modelling of the migration and accumulation of radionuclides within the biosphere once those radionuclides are released or reach one or more parts of the biosphere (atmosphere, water bodies or soils). The model development also includes evaluation of radiological impacts arising from the resulting distribution of radionuclides in the biosphere. In 1996, a Methodology to analyse the biosphere in this context proposed to ENRESA. The level of development of the different aspects proposed within the Methodology was quite heterogeneous and, while aspects of radionuclide transport modelling were already well developed in theoretical and practical terms, other aspects like the procedure for conceptual model development and the description of biosphere system representatives of the long term needed further developments. At present, the International Atomic Energy Agency (IAEA) Programme on Biosphere Modelling and Assessment (BIOMASS) in collaboration with several national organizations, ENRESA and CIEMAT among them, is working to complete and augment the Reference Biosphere Methodology and to produce some practical descriptions of Reference Systems. The overall purpose of this document is to apply the Methodology, taking account of on-going developments in biosphere modelling, to the last performance assessment (PA) exercise made by ENRESA (ENRESA, 1997), using from it the general and particular information about the assessment context, radionuclide information, geosphere and geobiosphere interface data. There are three particular objectives to this work: (a) to determine the practicability of the Methodology in an application to a realistic assessment situation, (b) To compare and contrast previous biosphere modelling in HLW PA and, (c) to test software development related with data management and modelling. (Author) 42 refs

Geometric integrator for simulations in the canonical ensemble

Energy Technology Data Exchange (ETDEWEB)

Tapias, Diego, E-mail: diego.tapias@nucleares.unam.mx [Departamento de Física, Facultad de Ciencias, Universidad Nacional Autónoma de México, Ciudad Universitaria, Ciudad de México 04510 (Mexico); Sanders, David P., E-mail: dpsanders@ciencias.unam.mx [Departamento de Física, Facultad de Ciencias, Universidad Nacional Autónoma de México, Ciudad Universitaria, Ciudad de México 04510 (Mexico); Computer Science and Artificial Intelligence Laboratory, Massachusetts Institute of Technology, 77 Massachusetts Avenue, Cambridge, Massachusetts 02139 (United States); Bravetti, Alessandro, E-mail: alessandro.bravetti@iimas.unam.mx [Instituto de Investigaciones en Matemáticas Aplicadas y en Sistemas, Universidad Nacional Autónoma de México, Ciudad Universitaria, Ciudad de México 04510 (Mexico)

2016-08-28

We introduce a geometric integrator for molecular dynamics simulations of physical systems in the canonical ensemble that preserves the invariant distribution in equations arising from the density dynamics algorithm, with any possible type of thermostat. Our integrator thus constitutes a unified framework that allows the study and comparison of different thermostats and of their influence on the equilibrium and non-equilibrium (thermo-)dynamic properties of a system. To show the validity and the generality of the integrator, we implement it with a second-order, time-reversible method and apply it to the simulation of a Lennard-Jones system with three different thermostats, obtaining good conservation of the geometrical properties and recovering the expected thermodynamic results. Moreover, to show the advantage of our geometric integrator over a non-geometric one, we compare the results with those obtained by using the non-geometric Gear integrator, which is frequently used to perform simulations in the canonical ensemble. The non-geometric integrator induces a drift in the invariant quantity, while our integrator has no such drift, thus ensuring that the system is effectively sampling the correct ensemble.

Geometric integrator for simulations in the canonical ensemble

International Nuclear Information System (INIS)

Tapias, Diego; Sanders, David P.; Bravetti, Alessandro

2016-01-01

We introduce a geometric integrator for molecular dynamics simulations of physical systems in the canonical ensemble that preserves the invariant distribution in equations arising from the density dynamics algorithm, with any possible type of thermostat. Our integrator thus constitutes a unified framework that allows the study and comparison of different thermostats and of their influence on the equilibrium and non-equilibrium (thermo-)dynamic properties of a system. To show the validity and the generality of the integrator, we implement it with a second-order, time-reversible method and apply it to the simulation of a Lennard-Jones system with three different thermostats, obtaining good conservation of the geometrical properties and recovering the expected thermodynamic results. Moreover, to show the advantage of our geometric integrator over a non-geometric one, we compare the results with those obtained by using the non-geometric Gear integrator, which is frequently used to perform simulations in the canonical ensemble. The non-geometric integrator induces a drift in the invariant quantity, while our integrator has no such drift, thus ensuring that the system is effectively sampling the correct ensemble.

Post-closure biosphere assessment modelling: comparison of complex and more stylised approaches.

Science.gov (United States)

Walke, Russell C; Kirchner, Gerald; Xu, Shulan; Dverstorp, Björn

2015-10-01

Geological disposal facilities are the preferred option for high-level radioactive waste, due to their potential to provide isolation from the surface environment (biosphere) on very long timescales. Assessments need to strike a balance between stylised models and more complex approaches that draw more extensively on site-specific information. This paper explores the relative merits of complex versus more stylised biosphere models in the context of a site-specific assessment. The more complex biosphere modelling approach was developed by the Swedish Nuclear Fuel and Waste Management Co (SKB) for the Formark candidate site for a spent nuclear fuel repository in Sweden. SKB's approach is built on a landscape development model, whereby radionuclide releases to distinct hydrological basins/sub-catchments (termed 'objects') are represented as they evolve through land rise and climate change. Each of seventeen of these objects is represented with more than 80 site specific parameters, with about 22 that are time-dependent and result in over 5000 input values per object. The more stylised biosphere models developed for this study represent releases to individual ecosystems without environmental change and include the most plausible transport processes. In the context of regulatory review of the landscape modelling approach adopted in the SR-Site assessment in Sweden, the more stylised representation has helped to build understanding in the more complex modelling approaches by providing bounding results, checking the reasonableness of the more complex modelling, highlighting uncertainties introduced through conceptual assumptions and helping to quantify the conservatisms involved. The more stylised biosphere models are also shown capable of reproducing the results of more complex approaches. A major recommendation is that biosphere assessments need to justify the degree of complexity in modelling approaches as well as simplifying and conservative assumptions. In light of

Biosphere modeling in waste disposal safety assessments -- An example using the terrestrial-aquatic model of the environment

International Nuclear Information System (INIS)

Klos, R.A.

1998-01-01

Geological disposal of radioactive wastes is intended to provide long-term isolation of potentially harmful radionuclides from the human environment and the biosphere. The long timescales involved pose unique problems for biosphere modeling because there are considerable uncertainties regarding the state of the biosphere into which releases might ultimately occur. The key to representing the biosphere in long-timescale assessments is the flexibility with which those aspects of the biosphere that are of relevance to dose calculations are represented, and this comes from the way in which key biosphere features, events, and processes are represented in model codes. How this is done in contemporary assessments is illustrated by the Terrestrial-Aquatic Model of the Environment (TAME), an advanced biosphere model for waste disposal assessments recently developed in Switzerland. A numerical example of the release of radionuclides from a subterranean source to an inland valley biosphere is used to illustrate how biosphere modeling is carried out and the practical ways in which meaningful quantitative results can be achieved. The results emphasize the potential for accumulation of radionuclides in the biosphere over long timescales and also illustrate the role of parameter values in such modeling

Application of a generic biosphere model for dose assessments to five European sites

International Nuclear Information System (INIS)

Chen, Q; Kowe, R; Mobbs, S F; Proehl, G; Olyslaegers, G; Zeevaert, T; Kanyar, B; Pinedo, P; Simon, I; Bergstroem, U; Hallberg, B; Jones, J A; Oatway, W B; Watson, S J

2006-01-01

The BIOMOSA (BIOsphere MOdels for Safety Assessment of radioactive waste disposal) project was part of the EC fifth framework research programme. The main goal of this project was to improve the scientific basis for the application of biosphere models in the framework of long-term safety studies of radioactive waste disposal facilities and to enhance the confidence in using biosphere models for performance assessments. The study focused on the development and application of a generic biosphere tool BIOGEM (BIOsphere GEneric Model) using the IAEA BIOMASS reference biosphere methodology, and the comparison between BIOGEM and five site-specific biosphere models. The site-specific models and the generic model were applied to five typical locations in Europe, resulting in estimates of the annual effective individual doses to the critical groups and the ranking of the importance of the exposure pathways for each of the sites. Uncertainty in the results was also estimated by means of stochastic calculations based on variation of the site-specific parameter values. This paper describes the generic model and the deterministic and stochastic results obtained when it was applied to the five sites. Details of the site-specific models and the corresponding results are described in two companion papers. This paper also presents a comparison of the results between the generic model and site-specific models. In general, there was an acceptable agreement of the BIOGEM for both the deterministic and stochastic results with the results from the site-specific models

The life span of the biosphere revisited

Science.gov (United States)

Caldeira, Ken; Kasting, James F.

1992-01-01

How much longer the biosphere can survive on earth is reexamined using a more elaborate model than that of Lovelock and Whitfield (1982). The model includes a more accurate treatment of the greenhouse effect of CO2, a biologically mediated weathering parametrization, and the realization that C4 photosynthesis can persist to much lower concentrations of atmospheric CO2. It is found that a C4-plant-based biosphere could survive for at least another 0.9 Gyr to 1.5 Gyr after the present time, depending respectively on whether CO2 or temperature is the limiting factor. Within an additional 1 Gyr, earth may lose water to space, thereby following the path of Venus.

Evaluation of Features, Events, and Processes (FEP) for the Biosphere Model

International Nuclear Information System (INIS)

Wasiolek, M. A.

2003-01-01

The purpose of this report is to document the evaluation of biosphere features, events, and processes (FEPs) that relate to the license application (LA) process as required by the U.S. Nuclear Regulatory Commission (NRC) regulations at 10 CFR 63.114 (d, e, and f) [DIRS 156605]. The evaluation determines whether specific biosphere-related FEPs should be included or excluded from consideration in the Total System Performance Assessment (TSPA). This analysis documents the technical basis for screening decisions as required at 10 CFR 63.114 (d, e, and f) [DIRS 156605]. For FEPs that are included in the TSPA, this analysis provides a TSPA disposition, which summarizes how the FEP has been included and addressed in the TSPA model, and cites the analysis reports and model reports that provide the technical basis and description of its disposition. For FEPs that are excluded from the TSPA, this analysis report provides a screening argument, which identifies the basis for the screening decision (i.e., low probability, low consequence, or by regulation) and discusses the technical basis that supports that decision. In cases, where a FEP covers multiple technical areas and is shared with other FEP analysis reports, this analysis may provide only a partial technical basis for the screening of the FEP. The full technical basis for these shared FEPs is addressed collectively by all FEP analysis reports that cover technical disciplines sharing a FEP. FEPs must be included in the TSPA unless they can be excluded by low probability, low consequence, or regulation. A FEP can be excluded from the TSPA by low probability per 10 CFR 63.114(d) [DIRS 156605], by showing that it has less than one chance in 10,000 of occurring over 10,000 years (or an approximately equivalent annualized probability of 10 -8 ). A FEP can be excluded from the TSPA by low consequence per 10 CFR 63.114 (e or f) [DIRS 156605], by showing that omitting the FEP would not significantly change the magnitude and

European-wide simulations of croplands using an improved terrestrial biosphere model: 2. Interannual yields and anomalous CO2 fluxes in 2003

Science.gov (United States)

Smith, P. C.; Ciais, P.; Peylin, P.; de Noblet-Ducoudré, N.; Viovy, N.; Meurdesoif, Y.; Bondeau, A.

2010-12-01

Aiming at producing improved estimates of carbon source/sink spatial and interannual patterns across Europe (35% croplands), this work uses the ORCHIDEE-STICS terrestrial biosphere model including a more realistic representation of croplands, described in part 1 (Smith et al., 2010). Crop yield is derived from annual Net Primary Productivity and compared with wheat and grain maize harvest data for five European countries. Over a 34 year period, the best correlation coefficient obtained between observed and simulated yield time series is for irrigated maize in Italy (R = 0.73). In the data as well as in the model, 1976 and 2003 appear as climate anomalies causing a ≈40% yield drop in the most affected regions. Simulated interannual yield anomalies and the spatial pattern of the yield drop in 2003 are found to be more realistic than the results from ORCHIDEE with no representation of croplands. The simulated 2003 anomalous carbon source from European ecosystems to the atmosphere due to the 2003 summer heat wave is in good agreement with atmospheric inversions (0.20GtC, from May to October). The anomaly is twice too large in the ORCHIDEE alone simulation, owing to the unrealistically high exposure of herbaceous plants to the extreme summer conditions. The mechanisms linking abnormally high summer temperatures, the crop productivity drop, and significant carbon source from European ecosystems in 2003 are discussed. Overall, this study highlights the importance of accounting for the specific phenologies of crops sown both in winter and in spring and for irrigation applied to summer crops in regional/global models of the terrestrial carbon cycle.

Overall strategy for management of parameters and data in the biosphere assessment portfolio

International Nuclear Information System (INIS)

Hjerpe, T.

2006-12-01

Throughout the biosphere assessment, the parameters selected to represent the present and future biosphere and choices of data values are crucial issues, greatly affecting the end result. The necessity of clear strategy for managing parameters and data is obvious; how to handle the variability of parameters as such, the selection from different sources, the derivation of values of model parameters not readily available, storage of the data in a proper manner, and assuring the quality throughout the whole assessment programme. In this working report a proposed set of broad guidelines for the overall strategy for the management of parameters and data in the biosphere assessment strategy is first presented. Thereafter, a scheme is proposed for assuring the knowledge quality of data. Finally, a proposal for requirements and management of the biosphere assessment database and the current status of the on-going work building the biosphere assessment database and interfaces to other tools are presented. (orig.)

Herpetofauna of the Camili Biosphere Rezerve Area (Borçka, Artvin, Turkey

Directory of Open Access Journals (Sweden)

Murat AFSAR

2011-03-01

Full Text Available In this study, 15 amphibian and reptile species were recorded from 12 different localities in the Camili Biosphere Reserve, known as the first biosphere site of Turkey. Two of these species are Urodelan, four are Anuran, four are Lacertilia and five are Ophidia. Two black coloured specimens belongs to Natrix genus collected from biosphere rezerv area are compered with literature data belongs to N. megalocephala. Moreover, the population and habitat status of threatened species were investigated, required conservation measures were explained.

Russian biosphere reserves at the youth MAB-2017 Forum in Italy

Directory of Open Access Journals (Sweden)

Elena A. Shuyskaya

2018-02-01

Full Text Available Russia was represented by 9 participants from Biosphere Reserves at the MAB Youth Forum in Italy. The main question of the Forum was «How to involve the young in the work of biosphere reserves?» The debate resulted in a Declaration, elaborated by participants from around the world (282 delegates from 85 countries. Measures to improve scientific cooperation, data exchange in the sphere of educational tourism and administrative management, development of joint projects in environmental education were formulated. The article contains a number of recommendations for the network of biosphere reserves in Russia, based on Seville strategy and Lima Action Plan.

Tropical rainforest biome of Biosphere 2. Structure, composition and results of the first 2 years of operation

Energy Technology Data Exchange (ETDEWEB)

Leigh, Linda S. [Systems Ecology and Energy Analysis Program, Department of Environmental Engineering Sciences, University of Florida, Gainesville, FL (United States); Burgess, Tony; Marino, Bruno D.V.; Wei, Yong Dan [Biosphere 2 Center, Inc. P.O. Box 689, Oracle, AZ (United States)

1999-06-01

The tropical rainforest biome in the Biosphere 2 mesocosm was managed with rainfall and temperature conditions to simulate a natural rainforest typical of the new world tropics. The establishment of the biome was based on the introduction of excessive numbers of species allowing self-organization of an ecologically unique rainforest. Over 282 species of plants from rainforest areas were planted within the topographically diverse rainforest biome (area of 1900 m{sup 2}, volume of 35,000 m{sup 3}), just before the Biosphere 2 closure in 1991. Approximately 61% of these species survived when counted in 1993, representing a plant species richness reduction to 172 species in 0.19 hectare. Rank order graphs show that a high diversity community resulted not unlike insular rainforests. The plants of the rainforest mesocosm, however, grew under anomalous conditions of soil (amended desert grassland soil), atmospheric composition (CO{sub 2} up to 4500 ppm by volume (ppmv)) and rainwater composition (high salinity and nutrients). Stem growth rates of a dominant canopy tree, Cecropia, were up to four times higher but had reduced diameter at breast height compared to natural counterparts. Human intervention in plant succession was also an important factor in shaping the ecology of the rainforest biome of Biosphere 2

Building of Nuclear Ship Engineering Simulation System development of the simulator for the integral type reactor

Energy Technology Data Exchange (ETDEWEB)

Takahashi, Teruo; Shimazaki, Junya; Yabuuchi, Noriaki; Fukuhara, Yosifumi; Kusunoki, Takeshi; Ochiai, Masaaki [Department of Nuclear Energy Systems, Tokai Research Establishment, Japan Atomic Energy Research Institute, Tokai, Ibaraki (Japan); Nakazawa, Toshio [Department of HTTR Project, Oarai Research Establishment, Japan Atomic Energy Research Institute, Oarai, Ibaraki (Japan)

2000-03-01

JAERI had carried out the design study of a light-weight and compact integral type reactor of power 100 MW{sub th} with passive safety as a power source for the future nuclear ships, and completed an engineering design. To confirm the design and operation performance and to utilize the study of automation of the operations of reactor, we developed a real-time simulator for the integral type reactor. This simulator is a part of Nuclear Ship Engineering Simulation System (NESSY) and on the same hardware as 'Mutsu' simulator which was developed to simulate the first Japanese nuclear ship Mutsu'. Simulation accuracy of 'Mutsu' simulator was verified by comparing the simulation results With data got in the experimental voyage of 'Mutsu'. The simulator for the integral type reactor uses the same programs which were used in 'Mutsu' simulator for the separate type PWR, and the simulated results are approximately consistent with the calculated values using RELAP5/MOD2 (The later points are reported separately). Therefore simulation accuracy of the simulator for the integral type reactor is also expected to be reasonable, though it is necessary to verify by comparing with the real plant data or experimental data in future. We can get the perspectives to use as a real-time engineering simulator and to achieve the above-mentioned aims. This is a report on development of the simulator for the integral type reactor mainly focused on the contents of the analytical programs expressed the structural features of reactor. (author)

Co-simulation of innovative integrated HVAC systems in buildings

Energy Technology Data Exchange (ETDEWEB)

Trcka, Marija; Hensena, Jan L.M.; Wetter, Michael

2010-06-21

Integrated performance simulation of buildings HVAC systems can help in reducing energy consumption and increasing occupant comfort. However, no single building performance simulation (BPS) tool offers sufficient capabilities and flexibilities to analyze integrated building systems and to enable rapid prototyping of innovative building and system technologies. One way to alleviate this problem is to use co-simulation, as an integrated approach to simulation. This article elaborates on issues important for co-simulation realization and discusses multiple possibilities to justify the particular approach implemented in the here described co-simulation prototype. The prototype is validated with the results obtained from the traditional simulation approach. It is further used in a proof-of-concept case study to demonstrate the applicability of the method and to highlight its benefits. Stability and accuracy of different coupling strategies are analyzed to give a guideline for the required coupling time step.

Integrated Simulation Of Supply Chain Management

Directory of Open Access Journals (Sweden)

N.Manikandan

2013-06-01

Full Text Available Nowadays, manufacturers face the challenge of reducing manufacturing cycle time, delivery lead time and inventory reduction. Every organization has its own objectives and its own way of decision making processes. Because of the conflictions among the objectives of each organization and non-integrated decision making processes, there has been a need for a new mechanism, which help to resolve those conflictions and to integrate processes. In the early 1990s, management is a process of integrating and utilizing suppliers, manufacturers, warehouses and retailers, so that goods are produced and delivered at the right quantities and at the right time while minimizing costs as well as satisfying customer requirements. Managing the entire supply chain becomes a key factor for the successful business. Organizations now realize that non-integrated manufacturing processes, nonintegrated distribution processes and poor relationships with suppliers and customers are in adequate for their success. The supply chain areas are affected by the organization’s plan. The organization plan’s impact on the supply chain areas cannot be predicted before its execution. Simulation paves way to evaluate the performance of plans before the execution of the plan. This paper describes the effort of developing a simulation model for the supply chain management in an industry. This article discusses the requirement of supply chain simulation modeling.

Database for radionuclide transport in the biosphere

International Nuclear Information System (INIS)

Jiskra, J.

1985-01-01

The biosphere model is the final link in the chain of radionuclide transport models, used for radiation dose calculations from high level waste repositories. This report presents the data needed for biosphere calculations and discusses them where necessary. The first part is dedicated to the nuclide specific parameters like distribution coefficients (water - soil), concentration ratios (soil - plant) and distribution factors (for milk, meat etc.) which are reported in the literature. The second part contains the choice of regions, their division into compartments and the discussion of nutritional habits for man and animals. At the end a theoretical population for each region is estimated based on the consumption rates and on the yield of agricultural products, assuming an autonomous nutrition. (Auth.)

Evaluation of Features, Events, and Processes (FEP) for the Biosphere Model

Energy Technology Data Exchange (ETDEWEB)

M. A. Wasiolek

2003-10-09

The purpose of this report is to document the evaluation of biosphere features, events, and processes (FEPs) that relate to the license application (LA) process as required by the U.S. Nuclear Regulatory Commission (NRC) regulations at 10 CFR 63.114 (d, e, and f) [DIRS 156605]. The evaluation determines whether specific biosphere-related FEPs should be included or excluded from consideration in the Total System Performance Assessment (TSPA). This analysis documents the technical basis for screening decisions as required at 10 CFR 63.114 (d, e, and f) [DIRS 156605]. For FEPs that are included in the TSPA, this analysis provides a TSPA disposition, which summarizes how the FEP has been included and addressed in the TSPA model, and cites the analysis reports and model reports that provide the technical basis and description of its disposition. For FEPs that are excluded from the TSPA, this analysis report provides a screening argument, which identifies the basis for the screening decision (i.e., low probability, low consequence, or by regulation) and discusses the technical basis that supports that decision. In cases, where a FEP covers multiple technical areas and is shared with other FEP analysis reports, this analysis may provide only a partial technical basis for the screening of the FEP. The full technical basis for these shared FEPs is addressed collectively by all FEP analysis reports that cover technical disciplines sharing a FEP. FEPs must be included in the TSPA unless they can be excluded by low probability, low consequence, or regulation. A FEP can be excluded from the TSPA by low probability per 10 CFR 63.114(d) [DIRS 156605], by showing that it has less than one chance in 10,000 of occurring over 10,000 years (or an approximately equivalent annualized probability of 10{sup -8}). A FEP can be excluded from the TSPA by low consequence per 10 CFR 63.114 (e or f) [DIRS 156605], by showing that omitting the FEP would not significantly change the magnitude and

Integral Pressurized Water Reactor Simulator Manual

International Nuclear Information System (INIS)

2017-01-01

This publication provides detailed explanations of the theoretical concepts that the simulator users have to know to gain a comprehensive understanding of the physics and technology of integral pressurized water reactors. It provides explanations of each of the simulator screens and various controls that a user can monitor and modify. A complete description of all the simulator features is also provided. A detailed set of exercises is provided in the Exercise Handbook accompanying this publication.

Safety case for the disposal of spent nuclear fuel at Olkiluoto. Surface and near-surface hydrological modelling in the biosphere assessment BSA-2012

International Nuclear Information System (INIS)

Karvonen, T.

2013-05-01

The Finnish nuclear waste disposal company, Posiva Oy, is planning an underground repository for spent nuclear fuel to be constructed on the island of Olkiluoto on the south-west coast of Finland. This study is part of the biosphere assessment (BSA-2012) within the safety case for the repository. The surface hydrological modelling described in this report is aimed at providing link between radionuclide transport in the geosphere and in the biosphere systems. The SVAT-model and Olkiluoto site scale surface hydrological model were calibrated and validated in the present day conditions using the input data provided by the Olkiluoto Monitoring Programme (OMO). During the next 10 000 years the terrain and ecosystem development is to a large extent driven by the postglacial crustal uplift. UNTAMO is a GIS toolbox developed for simulating land-uplift driven or other changes in the biosphere. All the spatial and temporal input data (excluding meteorological data) needed in the surface hydrological modelling were provided by the UNTAMO toolbox. The specific outputs given by UNTAMO toolbox are time-dependent evolution of the biosphere objects. They are continuous and sufficiently homogeneous sub-areas of the modelled area that could potentially receive radionuclides released from the repository. Possible ecosystem types for biosphere objects are coast, lake, river, forest, cropland, pasture and wetland. The primary goal of this study was to compute vertical and horizontal water fluxes in the biosphere objects. These data will be used in the biosphere radionuclide transport calculations. The method adopted here is based on calculating average vertical and horizontal fluxes for biosphere objects from the results of the full 3D-model. It was not necessary to develop any simplified hydrological model for the biosphere objects. This report includes modelling results from for the Reference Case (present day climate) and Terr M axAgri Case (maximum extent of agricultural areas and

Methodology for the biosphere evaluation during the RRAA management. Application for the Mediterranean system

International Nuclear Information System (INIS)

Pinedo, P.; Simon, I.; Aguero, A.

1998-01-01

For several years CIEMAT has been developing for ENRESA knowledge and tools to support the modelling of the migration and accumulation of radionuclides within the biosphere once those radionuclides are released or reach one or more parts of the biosphere (atmosphere, water impacts arising from the resulting distribution of radionuclides in the biosphere. In 1996, a Methodology to analyse the biosphere in the context of high level waste repositories was proposed to ENRESA, where the issues mentioned above were considered and treated. The level of development of the different aspects proposed within the Methodology was quite heterogeneous and, while aspects of radionuclide transport modelling were already well developed in theoretical and practical terms, other aspects like the procedure for conceptual model development using the RES matrix and the description of biosphere systems representatives of the long term needed further developments. These own methodological developments have been developed in parallel with similar international developments within which there were and are an active participation, the BIOMOVS II international Project, finalized in 1996 and where it was developed the so called Reference Biosphere Methodology and, the International Atomic Energy Agency (IAEA) Programme on Biosphere Modelling and Assessment (BIOMASS), that is developed at present in collaboration with several national organizations, ENRESA and CIEMAT among them. The work described here takes account of these international developments. The overall purpose of this work is to apply the Methodology, to the last performance assessment (PA) exercise made by ENRESA, using form it the general and particular information about the assessment context, the source term, and the geo-biosphere interface data. (Author) 6 refs

Integrated assessment, water resources, and science-policy communication

International Nuclear Information System (INIS)

Davies, E.G.R.; Akhtar, M.K.; McBean, G.A.; Simonovic, S.P.

2009-01-01

Traditional climate change modeling neglects the role of feedbacks between different components of society-biosphere-climate system. Yet, such interconnections are critical. This paper describes an alternative, Integrated Assessment (IA) model that focuses on feedbacks not only within individual elements of the society-biosphere-climate system, but also on their interconnections. The model replicates the relevant dynamics of nine components of the society-biosphere- climate system at the sectoral, or single-component, level: climate, carbon cycle, hydrological cycle, water demand, water quality, population, land use, energy and economy. The paper discusses the role of the model in science-policy dialogue. (author)

The status of world biosphere modelling for waste disposal assessments following BIOMOVS II

International Nuclear Information System (INIS)

Klos, R.; Reid, J.A.K.; Santucci, P.; Bergstrom, U.

1996-01-01

Biosphere modelling for radioactive waste disposal assessments faces unique problems. Models for such applications tend to be quite distinct from other similar environmental assessment tools. Over the past few years, two of the Working Groups in the second international biosphere model validation study (BIOMOVS II) have been considering the special requirements for such models. The BIOMOVS II Reference Biospheres Working Group has concentrated on the elaboration of the methodology for the definition of models for such assessments. lie Complementary Studies Working Group has dealt with how the Features, Events and Processes (FEPS) included in the participating models are represented, in the context of the representation of a temperate inland biosphere. The aim of Complementary Studies was to move forward from the first phase of BIOMOVS, with the analysis going further and deeper into principles on which the participating models are based. Ten of the leading models from around the world have participated in the Complementary Studies model intercomparison exercise. This paper presents some key findings using the international biosphere FEP-list produced by the Reference Biospheres Working Group as a framework for discussing the current state-of-the-art. Common features of the models as well as reasons for the model differences are discussed. Areas where the international community could benefit from a harmonisation of approaches are also identified, setting out possible future requirements and developments. In the Complementary Studies intercomparison, the hypothetical release of radionuclides to an inland valley biosphere was considered. The radionuclides considered in the study were selected because of their relevance for underground repositories for long-lived radioactive wastes and because their individual properties made them suitable probes for many of the important Features, Events and Processes (FEPS) in long timescale biosphere modelling. The data

Review of Project SAFE: Comments on biosphere conceptual model description and risk assessment methodology

International Nuclear Information System (INIS)

Klos, Richard; Wilmot, Roger

2002-09-01

The Swedish Nuclear Fuel and Waste Management Company's (SKB's) most recent assessment of the safety of the Forsmark repository for low-level and intermediate-level waste (Project SAFE) is currently undergoing review by the Swedish regulators. As part of its review, the Swedish Radiation Protection Institute (SSI) identified that two components of SAFE require more detailed review: (i) the conceptual model description of the biosphere system, and (ii) SKB's risk assessment methodology. We have reviewed the biosphere system interaction matrix and how this has been used in the identification, justification and description of biosphere models for radiological assessment purposes. The risk assessment methodology has been reviewed considering in particular issues associated with scenario selection, assessment timescale, and the probability and risk associated with the well scenario. There is an extensive range of supporting information on which biosphere modelling in Project SAFE is based. However, the link between this material and the biosphere models themselves is not clearly set out. This leads to some contradictions and mis-matches between description and implementation. One example concerns the representation of the geosphere-biosphere interface. The supporting description of lakes indicates that interaction between groundwaters entering the biosphere through lake bed sediments could lead to accumulations of radionuclides in sediments. These sediments may become agricultural areas at some time in the future. In the numerical modelling of the biosphere carried out in Project SAFE, the direct accumulation of contaminants in bed sediments is not represented. Application of a more rigorous procedure to ensure numerical models are fit for purpose is recommended, paying more attention to issues associated with the geosphere-biosphere interface. A more structured approach to risk assessment would be beneficial, with a better explanation of the difference between

Simulation of quantum dynamics with integrated photonics

Science.gov (United States)

Sansoni, Linda; Sciarrino, Fabio; Mataloni, Paolo; Crespi, Andrea; Ramponi, Roberta; Osellame, Roberto

2012-12-01

In recent years, quantum walks have been proposed as promising resources for the simulation of physical quantum systems. In fact it is widely adopted to simulate quantum dynamics. Up to now single particle quantum walks have been experimentally demonstrated by different approaches, while only few experiments involving many-particle quantum walks have been realized. Here we simulate the 2-particle dynamics on a discrete time quantum walk, built on an array of integrated waveguide beam splitters. The polarization independence of the quantum walk circuit allowed us to exploit the polarization entanglement to encode the symmetry of the two-photon wavefunction, thus the bunching-antibunching behavior of non interacting bosons and fermions has been simulated. We have also characterized the possible distinguishability and decoherence effects arising in such a structure. This study is necessary in view of the realization of a quantum simulator based on an integrated optical array built on a large number of beam splitters.

Methodology for biosphere analysis in high level waste disposal. Application to the Mediterranean system

International Nuclear Information System (INIS)

Pinedo, P.; Simon, I.; Aguero, A.; Cancio, D.

2000-01-01

For several years CIEMAT has been developing for ENRESA a conceptual approach and tools to support the modelling of the migration and accumulation of radionuclides within the biosphere once those radionuclides are released or reach one or more parts of the biosphere (atmosphere, water bodies or soils). The model development also includes evaluation of radiological impacts arising from the resulting distribution of radionuclides in the biosphere. At the time when the methodology was proposed, the level of development of the different aspects proposed within it was quite heterogeneous and, while aspects of radionuclide transport modelling were already well developed in theoretical and practical terms, other aspects, like the procedure for conceptual model development and the description of biosphere systems representatives of the long term needed further developments. The developments have been performed in parallel to international projects, within which there were and are an active participation, mainly, the BIOphere Models Validation Study (BIOMOVS II) international Project, within which it was developed the so called Reference Biosphere Methodology and, the International Atomic Energy Agency (IAEA) Programme on BIOsphere Modelling and ASSessment methods (BIOMASS), that is under development at present. The methodology been made takes account of these international developments. The purpose of the work summarised herein is the application of the methodology to the 1997 performance assessment (PA) exercise made by ENRESA, using from it the general and particular information about the assessment context, the source term, and the geo-biosphere interface data. (author)

Implementation of the Biosphere Compatibility Principle in Urban Planning: How to Train Next-Generation Specialists

Science.gov (United States)

Ivanova, Zinaida Ilyinichna; Yudenkova, Olga Valeryevna; Ishkov, Aleksandr Dmitrievich; Shnyrenkov, Evgeny Anatolyevich

2015-01-01

The co-authors address the relevant issues concerning the need to implement the principle of the biosphere compatibility as the core prerequisite for the symbiotic co-existence of man and nature. Caring treatment of the biosphere, termination of its excessive exploitation, analysis of the ratio between the biospheric potential of specific areas…

Radioecological modelling of the biosphere as illustrated by the example of the model area Oberbauenstock

International Nuclear Information System (INIS)

Boehringer, J.; Fritschi, M.; Schwanner, I.; Resele, G.

1986-06-01

The biosphere model is the final link in the chain of radionuclide transport models used for radiation dose calculations for nuclear waste repositories. The dispersion of radionuclides from a low and intermediate level waste repository in the biosphere and their uptake by man through food pathways is investigated with a compartment model. The relevant biosphere parameters were based on the model site at Oberbauenstock and compiled as a model data set for further use in the biosphere modelling. Nuclide concentrations in the biosphere compartments and foodstuffs as well as annual individual radiation doses are calculated with the computer program BIOSPH. The present report contains a description of the model area and its subdivision into 4 compartments, a compilation of the relevant parameters and the simplifying assumptions that have been made, discussion of mathematical modelling of nuclide transport in the biosphere and of the calculation of the individual radiation doses, a technical description of the computer program BIOSPH and a detailed presentation of the results from the model calculations. (author)

Simulation of integrated beam experiment designs

International Nuclear Information System (INIS)

Grote, D.P.; Sharp, W.M.

2004-01-01

Simulation of designs of an Integrated Beam Experiment (IBX) class accelerator have been carried out. These simulations are an important tool for validating such designs. Issues such as envelope mismatch and emittance growth can be examined in a self-consistent manner, including the details of injection, accelerator transitions, long-term transport, and longitudinal compression. The simulations are three-dimensional and time-dependent, and begin at the source. They continue up through the end of the acceleration region, at which point the data is passed on to a separate simulation of the drift compression. Results are be presented

Accurate Kirkwood-Buff Integrals from Molecular Dynamics Simulations

DEFF Research Database (Denmark)

Wedberg, Nils Hejle Rasmus Ingemar; O'Connell, John P.; Peters, Günther H.J.

2010-01-01

A method is proposed for obtaining thermodynamic properties via Kirkwood–Buff (KB) integrals from molecular simulations. In order to ensure that the KB integration converges, the pair distribution function is extrapolated to large distances using the extension method of Verlet, which enforces...... of state fitted to simulation results. Good agreement is achieved for both fluids at densities larger than 1.5 times the critical density....

The World Campaign for the Biosphere.

Science.gov (United States)

Barman, Charles R.

1984-01-01

Lists and discusses goals of The World Campaign for the Biosphere and strategies designed to achieve these goals. Also lists eight suggestions for science teachers to help incorporate the goals into school curricula and programs. These include organizing assemblies which present information about environmental problems and presenting environmental…

Practical integrated simulation systems for coupled numerical simulations in parallel

Energy Technology Data Exchange (ETDEWEB)

Osamu, Hazama; Zhihong, Guo [Japan Atomic Energy Research Inst., Centre for Promotion of Computational Science and Engineering, Tokyo (Japan)

2003-07-01

In order for the numerical simulations to reflect 'real-world' phenomena and occurrences, incorporation of multidisciplinary and multi-physics simulations considering various physical models and factors are becoming essential. However, there still exist many obstacles which inhibit such numerical simulations. For example, it is still difficult in many instances to develop satisfactory software packages which allow for such coupled simulations and such simulations will require more computational resources. A precise multi-physics simulation today will require parallel processing which again makes it a complicated process. Under the international cooperative efforts between CCSE/JAERI and Fraunhofer SCAI, a German institute, a library called the MpCCI, or Mesh-based Parallel Code Coupling Interface, has been implemented together with a library called STAMPI to couple two existing codes to develop an 'integrated numerical simulation system' intended for meta-computing environments. (authors)

Climate change and the biosphere option: moving to a sustainable future

International Nuclear Information System (INIS)

Layzell, D.B.; Mitchell, H.M.

1999-01-01

Human activities resulting in greenhouse gas (GHG) emissions have been implicated as the primary factor forcing climate change. This evidence led to a landmark international agreement in Kyoto, (1997) committing the developed countries of the world to reductions in GHG emissions. In Canada, fossil fuel use over the past few centuries has released about 5200 Mt C into the atmosphere. An equivalent amount has probably been added as a result of deforestation and agricultural practice in this country. If we can manage our biosphere better and return even a fraction of the lost biosphere C, we can make a significant contribution to reducing Canada's current annual GHG emission. In the process, plants ( including trees) will trap the sun's energy and build an energy-rich biomass that we can learn to utilize as an energy, chemical and material resource for the future. In doing so, we will relieve the escalating demand for fossil fuels. The BIOCAP Network will be a multidisciplinary group of university, government and industry researchers dedicated to exploring the scientific, technological and policy implications of this 'biosphere option'. Canada's 'biosphere option' for GHG management is both a national opportunity and a global responsibility

Safety case for the disposal of spent nuclear fuel at Olkiluoto. Terrain and ecosystems development modelling in the biosphere assessment BSA-2012

International Nuclear Information System (INIS)

2013-12-01

This report is one of the four supporting reports for the three main biosphere reports in the safety case for the disposal of spent nuclear fuel at Olkiluoto, 'TURVA-2012'. The focus of this report is to detail the scenario analysis of terrain and ecosystems development at the Olkiluoto repository site within a time frame of 10 000 years, whereas the input data to this modelling is detailed in the Data Basis report. The results are used further especially in the surface and near-surface hydrological modelling and in the biosphere radionuclide transport and dose modelling, both part of the biosphere assessment 'BSA-2012' feeding into the safety case. Based on the results of the 18 cases simulated in the scenario analysis, it can be outlined that the most significant differences in respect of the dose implications of the repository arise from the inputs and settings affecting the rate of coastline retreat (i.e. land uplift and sea level) and determining whether there are croplands or not in the area. (orig.)

LIMITS OF THE EARTH BIOSPHERE

Directory of Open Access Journals (Sweden)

Karel KUDRNA

2011-01-01

Full Text Available Evaluation of the state of CO2 accumulation in the atmosphere demands knowledge on possibilities of the biosphere – its photosynthetizing apparatus, conditions and limits of absorption. A decisive precondition is to determine relation of CO2 accumulation by photosynthesis in dependence on the water balance, especially on its control quantity – transpiration, which is stabilized by supporting of underground waters.

The Earth's Biosphere

Science.gov (United States)

2002-01-01

In the last five years, scientists have been able to monitor our changing planet in ways never before possible. The Sea-viewing Wide Field-of-View Sensor (SeaWiFS), aboard the OrbView-2 satellite, has given researchers an unprecedented view of the biological engine that drives life on Earth-the countless forms of plants that cover the land and fill the oceans. 'There is no question the Earth is changing. SeaWiFS has enabled us, for the first time, to monitor the biological consequences of that change-to see how the things we do, as well as natural variability, affect the Earth's ability to support life,' said Gene Carl Feldman, SeaWiFS project manager at NASA's Goddard Space Flight Center, Greenbelt, Md. SeaWiFS data, based on continuous daily global observations, have helped scientists make a more accurate assessment of the oceans' role in the global carbon cycle. The data provide a key parameter in a number of ecological and environmental studies as well as global climate-change modeling. The images of the Earth's changing land, ocean and atmosphere from SeaWiFS have documented many previously unrecognized phenomena. The image above shows the global biosphere from June 2002 measured by SeaWiFS. Data in the oceans is chlorophyll concentration, a measure of the amount of phytoplankton (microscopic plants) living in the ocean. On land SeaWiFS measures Normalized Difference Vegetation Index, an indication of the density of plant growth. For more information and images, read: SeaWiFS Sensor Marks Five Years Documenting Earth'S Dynamic Biosphere Image courtesy SeaWiFS project and copyright Orbimage.

Evidence for an active rare biosphere within freshwater protists community.

Science.gov (United States)

Debroas, Didier; Hugoni, Mylène; Domaizon, Isabelle

2015-03-01

Studies on the active rare biosphere at the RNA level are mainly focused on Bacteria and Archaea and fail to include the protists, which are involved in the main biogeochemical cycles of the earth. In this study, the richness, composition and activity of the rare protistan biosphere were determined from a temporal survey of two lakes by pyrosequencing. In these ecosystems, the always rare OTUs represented 77.2% of the total OTUs and 76.6% of the phylogenetic diversity. From the various phylogenetic indices computed, the phylogenetic units (PUs) constituted exclusively by always rare OTUs were discriminated from the other PUs. Therefore, the rare biosphere included mainly taxa that are distant from the reference databases compared to the dominant ones. In addition, the rarest OTUs represented 59.8% of the active biosphere depicted by rRNA and the activity (rRNA:rDNA ratio) increased with the rarity. The high rRNA:rDNA ratio determined in the rare fraction highlights that some protists were active at low abundances and contribute to ecosystem functioning. Interestingly, the always rare and active OTUs were characterized by seasonal changes in relation with the main environmental parameters measured. In conclusion, the rare eukaryotes represent an active, dynamic and overlooked fraction in the lacustrine ecosystems. © 2015 John Wiley & Sons Ltd.

Assessment of dose conversion factors in a generic biosphere of a Korea HLW repository

International Nuclear Information System (INIS)

Hwang, Y. S.; Park, J. B.; Kang, C. H.

2002-01-01

Radioactive species released from a waste repository migrate through engineered and natural barriers and eventually reach the biosphere. Once entered the biosphere, contaminants transport various exposure pathways and finally reach a human. In this study the full RES matrix explaining the key compartments in the biosphere and their interactions is introduced considering the characteristics of the Korean biosphere. Then the three exposure groups are identified based on the compartments of interest. The full exposure pathways and corresponding mathematical expression for mass transfer coefficients and etc are developed and applied to assess the dose conversion factors of nuclides for a specific exposure group. Dose conversion factors assessed in this study will be used for total system performance assessment of a potential Korean HLW repository

Review of Project SAFE: Comments on biosphere conceptual model description and risk assessment methodology

Energy Technology Data Exchange (ETDEWEB)

Klos, Richard; Wilmot, Roger [Galson Sciences Ltd (United Kingdom)

2002-09-01

The Swedish Nuclear Fuel and Waste Management Company's (SKB's) most recent assessment of the safety of the Forsmark repository for low-level and intermediate-level waste (Project SAFE) is currently undergoing review by the Swedish regulators. As part of its review, the Swedish Radiation Protection Institute (SSI) identified that two components of SAFE require more detailed review: (i) the conceptual model description of the biosphere system, and (ii) SKB's risk assessment methodology. We have reviewed the biosphere system interaction matrix and how this has been used in the identification, justification and description of biosphere models for radiological assessment purposes. The risk assessment methodology has been reviewed considering in particular issues associated with scenario selection, assessment timescale, and the probability and risk associated with the well scenario. There is an extensive range of supporting information on which biosphere modelling in Project SAFE is based. However, the link between this material and the biosphere models themselves is not clearly set out. This leads to some contradictions and mis-matches between description and implementation. One example concerns the representation of the geosphere-biosphere interface. The supporting description of lakes indicates that interaction between groundwaters entering the biosphere through lake bed sediments could lead to accumulations of radionuclides in sediments. These sediments may become agricultural areas at some time in the future. In the numerical modelling of the biosphere carried out in Project SAFE, the direct accumulation of contaminants in bed sediments is not represented. Application of a more rigorous procedure to ensure numerical models are fit for purpose is recommended, paying more attention to issues associated with the geosphere-biosphere interface. A more structured approach to risk assessment would be beneficial, with a better explanation of the difference

Development status of the integrated tokamak simulator for K-DEMO

Energy Technology Data Exchange (ETDEWEB)

Kang, J. S.; Wang, J.; Hwang, Y. S. [Seoul National University, Seoul (Korea, Republic of); Jung, L. [National Fusion Research Institute, Daejeon (Korea, Republic of)

2016-10-15

Korean fusion demonstration reactor (K-DEMO) study has been conducted to investigate the feasibility of an electricity generation, self-sustained tritium cycle, and component test facility. To estimate its capability, the integrated fusion operation simulator called INFRA has been developed by organizing relevant computational codes with standard data models and framework. The different modules of the integrated simulator are chosen among well-validated codes. Standard data models are directly linked with KSTAR experimental data so that the integrated simulator can be used for interpretative simulations but also for predictive simulations. In this study, the current status of code development and some examples of KSTAR interpretative simulations are reported. ITER integrated modelling and analysis suite is imported to K-DEMO data model to take over ITER experience and to accelerate collaboration with international IMAS community. Standardized rules and guideline have been developed by ITER team for many years. Based on strict policy, this data model has been established and updated. This data model is used for experimental and simulation results. The INFRA system has been utilized to be an alpha version of a KDEMO simulator. Database, framework, and module integration are conducted. A test equilibrium run for KSTAR is done by filling the database with experiment results. More modules will be incorporated in a near future. Validation with KSTAR data and benchmarking previous modelling activity is also planned in order to confirm the feasibility of this system.

Toward a first-principles integrated simulation of tokamak edge plasmas

International Nuclear Information System (INIS)

Chang, C S; Klasky, Scott A; Cummings, Julian; Samtaney, Ravi; Shoshani, A.; Sugiyama, L.; Keyes, David E; Ku, Seung-Hoe; Park, G.; Parker, Scott; Podhorszki, Norbert; Strauss, H.; Abbasi, H.; Adams, Mark; Barreto, Roselyne D; Bateman, Glenn; Bennett, K.; Chen, Yang; D'Azevedo, Eduardo; Docan, Ciprian; Ethier, Stephane; Feibush, E.; Greengard, Leslie; Hahm, Taik Soo; Hinton, Fred; Jin, Chen; Khan, A.; Kritz, Arnold; Krstic, Predrag S; Lao, T.; Lee, Wei-Li; Lin, Zhihong; Lofstead, J.; Mouallem, P. A.; Nagappan, M.; Pankin, A.; Parashar, Manish; Pindzola, Michael S.; Reinhold, Carlos O; Schultz, David Robert; Schwan, Karsten; Silver, D.; Sim, A.; Stotler, D.

2008-01-01

Performance of the ITER is anticipated to be highly sensitive to the edge plasma condition. The edge pedestal in ITER needs to be predicted from an integrated simulation of the necessary first principles, multi-scale physics codes. The mission of the SciDAC Fusion Simulation Project (FSP) Prototype Center for Plasma Edge Simulation (CPES) is to deliver such a code integration framework by (1) building new kinetic codes XGC0 and XGC1, which can simulate the edge pedestal buildup; (2) using and improving the existing MHD codes ELITE, M3D-OMP, M3D-MPP and NIMROD, for study of large-scale edge instabilities called Edge Localized Modes (ELMs); and (3) integrating the codes into a framework using cutting-edge computer science technology. Collaborative effort among physics, computer science, and applied mathematics within CPES has created the first working version of the End-to-end Framework for Fusion Integrated Simulation (EFFIS), which can be used to study the pedestal-ELM cycles

Conch, Cooperatives, and Conflict: Conservation and Resistance in the Banco Chinchorro Biosphere Reserve

Directory of Open Access Journals (Sweden)

David M Hoffman

2014-01-01

Full Text Available In theory, biosphere reserves link biodiversity conservation with development, primarily through sustainable resource utilisation, and alternative, conservation-compatible economies in the buffer and transition zones outside the core area. Successful management should reduce pressure on natural resources within its core area as well as enable local communities to participate in the management of buffer zone resources in a sustainable manner. The Banco Chinchorro Biosphere Reserve was declared in 1996 to protect coral reefs and marine biodiversity, while also enabling fishing cooperatives to maintain their livelihoods based upon the sustainable extraction of lobster, conch, and scalefish. In 2004, eight years after the Reserve′s declaration, Mexican authorities struggled to control marine resource use in the reserve, especially the extraction of queen conch (Strombus gigas. This article provides an overview of the long struggle to conserve queen conch populations in the area. Particular attention is paid to describing the various forms of resistance fishermen employed to counter the increasing regulation and vigilance that accompanied the creation of the Banco Chinchorro Biosphere Reserve. This case chronicles the resistance to regulation and interpersonal violence that erupts when entrenched attitudes and practices are confronted with increasing surveillance. Thus, what was observed in the Banco Chinchorro Biosphere Reserve parallels other research that depicts the forms of resistance to conservation that local people enact when confronted with conservation interventions. Finally, the plight of queen conch in the Banco Chinchorro Biosphere Reserve clearly reflects the conflicts and difficulties found across Mexico in the implementation of the biosphere reserve model.

Recent developments in assessment of long-term radionuclide behavior in the geosphere-biosphere subsystem

International Nuclear Information System (INIS)

Smith, G.M.; Smith, K.L.; Kowe, R.; Pérez-Sánchez, D.; Thorne, M.; Thiry, Y.; Read, D.; Molinero, J.

2014-01-01

Decisions on permitting, controlling and monitoring releases of radioactivity into the environment rely on a great variety of factors. Important among these is the prospective assessment of radionuclide behavior in the environment, including migration and accumulation among and within specific environmental media, and the resulting environmental and human health impacts. Models and techniques to undertake such assessments have been developed over several decades based on knowledge of the ecosystems involved, as well as monitoring of previous radionuclide releases to the environment, laboratory experiments and other related research. This paper presents developments in the assessment of radiation doses and related research for some of the key radionuclides identified as of potential significance in the context of releases to the biosphere from disposal facilities for solid radioactive waste. Since releases to the biosphere from disposal facilities involve transfers from the geosphere to the biosphere, an important aspect is the combined effects of surface hydrology, near-surface hydrogeology and chemical gradients on speciation and radionuclide mobility in the zone in which the geosphere and biosphere overlap (herein described as the geosphere-biosphere subsystem). In turn, these aspects of the environment can be modified as a result of environmental change over the thousands of years that have to be considered in radioactive waste disposal safety assessments. Building on the experience from improved understanding of the behavior of the key radionuclides, this paper proceeds to describe development of a generic methodology for representing the processes and environmental changes that are characteristic of the interface between the geosphere and the biosphere. The information that is provided and the methodology that is described are based on international collaborative work implemented through the BIOPROTA forum, (www.bioprota.org). - Highlights: • Geological

SITE-94, Biosphere Model for SKI Project on the island of Aspro

International Nuclear Information System (INIS)

Barrdahl, Runo Alfons Gunnar

2003-01-01

1 - Description of program or function: A simple biosphere model has been designed for use in the SKI project related to a hypothetical repository for spent nuclear fuel on the island of Aspro near Oskarshamn in Southern Sweden. Project SITE-94 studies the safety aspects of this hypothetical repository. Any weakness in repository performance will reveal itself as a leakage of radionuclides out of the repository, and finally into the biosphere where man and nature are at risk of being exposed. Thus, as the final link in estimating such leakage, a biosphere model will provide an estimate of resulting radiation impact on man and nature. 2 - Methods: The present biosphere model involves a stationary scenario (Reference Scenario) and a climate evolution and geological scenario (Central Scenario). The stationary and time evolution scenarios contain as primary recipients a well and the bay of Borholm, i.e., the waters surrounding the island of Aspo. The time evolution scenario additionally incorporates as primary recipients a waste sample from intrusion and, in a remote future time, the Baltic Sea. Transport of radionuclides within the model system is assumed to be essentially immediate, except for in sediment subject to land rise. Except for this pathway, radioactive decay is therefore not included at all in the model. Land rise sediment is modeled to be subject to radioactive decay from the time the sediment no longer constitutes sea bottom until the desired time point of the model. Correction for radioactive decay is thus generally supposed to be made outside the biosphere model. Unless otherwise indicated, yearly individual and population committed (50 years) radiation doses to man are considered, and all scenarios involve a constant flux of 1 Bq/y of each radionuclide considered into the respective primary recipient. Nominal values of radionuclide flux will finally be multiplied with the radiation dose per one Bq per year resulting from the model in order to obtain

Radioactive waste disposal assessment - overview of biosphere processes and models

International Nuclear Information System (INIS)

Coughtrey, P.J.

1992-09-01

This report provides an overview of biosphere processes and models in the general context of the radiological assessment of radioactive waste disposal as a basis for HMIP's response to biosphere aspects of Nirex's submissions for disposal of radioactive wastes in a purpose-built repository at Sellafield, Cumbria. The overview takes into account published information from the UK as available from Nirex's safety and assessment research programme and HMIP's disposal assessment programme, as well as that available from studies in the UK and elsewhere. (Author)

Biosphere modelling for safety assessment of geological disposal taking account of denudation of contaminated soils. Research document

International Nuclear Information System (INIS)

Kato, Tomoko

2003-03-01

Biosphere models for safety assessment of geological disposal have been developed on the assumption that the repository-derived radionuclides reach surface environment by groundwater. In the modelling, river, deep well and marine have been considered as geosphere-biosphere (GBIs) and some Japanese-specific ''reference biospheres'' have been developed using an approach consistent with the BIOMOVS II/BIOMASS Reference Biosphere Methodology. In this study, it is assumed that the repository-derived radionuclide would reach surface environment in the form of solid phase by uplift and erosion of contaminated soil and sediment. The radionuclides entered into the surface environment by these processes could be distributed between solid and liquid phases and could spread within the biosphere via solid phase and also liquid phase. Based on these concepts, biosphere model that considers variably saturated zone under surface soil (VSZ) as a GBI was developed for calculating the flux-to-dose conversion factors of three exposure groups (farming, freshwater fishing, marine fishing) based on the Reference Biosphere Methodology. The flux-to-dose conversion factors for faming exposure group were the highest, and ''inhalation of dust'', external irradiation from soil'' and ''ingestion of soil'' were the dominant exposure pathways for most of radionuclides considered in this model. It is impossible to compare the flux-to-dose conversion factors calculated by the biosphere model in this study with those calculated by the biosphere models developed in the previous studies because the migration processes considered when the radionuclides entered the surface environment through the aquifer are different among the models; i.e. it has been assumed that the repository-derived radionuclides entered the GBIs such as river, deep well and marine via groundwater without dilution and retardation at the aquifer in the previous biosphere models. Consequently, it must be modelled the migration of

Integrating satellite retrieved leaf chlorophyll into land surface models for constraining simulations of water and carbon fluxes

KAUST Repository

Houborg, Rasmus

2013-07-01

In terrestrial biosphere models, key biochemical controls on carbon uptake by vegetation canopies are typically assigned fixed literature-based values for broad categories of vegetation types although in reality significant spatial and temporal variability exists. Satellite remote sensing can support modeling efforts by offering distributed information on important land surface characteristics, which would be very difficult to obtain otherwise. This study investigates the utility of satellite based retrievals of leaf chlorophyll for estimating leaf photosynthetic capacity and for constraining model simulations of water and carbon fluxes. © 2013 IEEE.

SiB3 Modeled Global 1-degree Hourly Biosphere-Atmosphere Carbon Flux, 1998-2006

Data.gov (United States)

National Aeronautics and Space Administration — The Simple Biosphere Model, Version 3 (SiB3) was used to produce a global data set of hourly carbon fluxes between the atmosphere and the terrestrial biosphere for...

The past, present and future supernova threat to Earth's biosphere

Science.gov (United States)

Beech, Martin

2011-12-01

A brief review of the threat posed to Earth's biosphere via near-by supernova detonations is presented. The expected radiation dosage, cosmic ray flux and expanding blast wave collision effects are considered, and it is argued that a typical supernova must be closer than ˜10-pc before any appreciable and potentially harmful atmosphere/biosphere effects are likely to occur. In contrast, the critical distance for Gamma-ray bursts is of order 1-kpc. In spite of the high energy effects potentially involved, the geological record provides no clear-cut evidence for any historic supernova induced mass extinctions and/or strong climate change episodes. This, however, is mostly a reflection of their being numerous possible (terrestrial and astronomical) forcing mechanisms acting upon the biosphere and the difficulty of distinguishing between competing scenarios. Key to resolving this situation, it is suggested, is the development of supernova specific extinction and climate change linked ecological models. Moving to the future, we estimate that over the remaining lifetime of the biosphere (˜2 Gyr) the Earth might experience 1 GRB and 20 supernova detonations within their respective harmful threat ranges. There are currently at least 12 potential pre-supernova systems within 1-kpc of the Sun. Of these systems IK Pegasi is the closest Type Ia pre-supernova candidate and Betelgeuse is the closest potential Type II supernova candidate. We review in some detail the past, present and future behavior of these two systems. Developing a detailed evolutionary model we find that IK Pegasi will likely not detonate until some 1.9 billion years hence, and that it affords absolutely no threat to Earth's biosphere. Betelgeuse is the closest, reasonably well understood, pre-supernova candidate to the Sun at the present epoch, and may undergo detonation any time within the next several million years. The stand-off distance of Betelgeuse at the time of its detonation is estimated to fall

Root structural and functional dynamics in terrestrial biosphere models--evaluation and recommendations.

Science.gov (United States)

Warren, Jeffrey M; Hanson, Paul J; Iversen, Colleen M; Kumar, Jitendra; Walker, Anthony P; Wullschleger, Stan D

2015-01-01

There is wide breadth of root function within ecosystems that should be considered when modeling the terrestrial biosphere. Root structure and function are closely associated with control of plant water and nutrient uptake from the soil, plant carbon (C) assimilation, partitioning and release to the soils, and control of biogeochemical cycles through interactions within the rhizosphere. Root function is extremely dynamic and dependent on internal plant signals, root traits and morphology, and the physical, chemical and biotic soil environment. While plant roots have significant structural and functional plasticity to changing environmental conditions, their dynamics are noticeably absent from the land component of process-based Earth system models used to simulate global biogeochemical cycling. Their dynamic representation in large-scale models should improve model veracity. Here, we describe current root inclusion in models across scales, ranging from mechanistic processes of single roots to parameterized root processes operating at the landscape scale. With this foundation we discuss how existing and future root functional knowledge, new data compilation efforts, and novel modeling platforms can be leveraged to enhance root functionality in large-scale terrestrial biosphere models by improving parameterization within models, and introducing new components such as dynamic root distribution and root functional traits linked to resource extraction. No claim to original US Government works. New Phytologist © 2014 New Phytologist Trust.

CISO: charter of integration for simulator openness

International Nuclear Information System (INIS)

Ponthieu, L.; Caremoli, C.; Mare, R.; Pernet, J.F.; Riu, D.

1999-01-01

In order to improve NPP simulators components homogeneity and reuse among projects, EDF (Electricite de France) has defined a Charter Integration for Simulator Openness. CISO, which is a set of rules and guidelines for simulator interoperability and openness, defines a static data model which must be used for any reference to the simulated installation, exchange procedures for simulation modules in a parallel environment and a standard basis for compatible communications between the simulator subsystems, CISO concentrates in interfaces and leaves open the individual choices for implementation. The prototyping phase is now completed, CISO will be put into practice for the next generation of EDF full-scale simulators, the guidelines must now enrich from experience. (author)

Exploration of a Subsurface Biosphere in a Volcanic Massive Sulfide: Results of the Mars Analog Rio Tinto Drilling Experiment

Science.gov (United States)

Stoker, C. R.; Stevens, T.; Amils, R.; Fernandez, D.

2005-12-01

Biological systems on Earth require three key ingredients-- liquid water, an energy source, and a carbon source, that are found in very few extraterrestrial environments. Previous examples of independent subsurface ecosystems have been found only in basalt aquifers. Such lithotrophic microbial ecosystems (LME) have been proposed as models for steps in the early evolution of Earth's biosphere and for potential biospheres on other planets where the surface is uninhabitable, such as Mars and Europa.. The Mars Analog Rio Tinto Experiment (MARTE) has searched in a volcanic massive sulfide deposit in Rio Tinto Spain for a subsurface biosphere capable of living without sunlight or oxygen and found a subsurface ecosystem driven by the weathering of the massive sulfide deposit (VMS) in which the rock matrix provides sufficient resources to support microbial metabolism, including the vigorous production of H2 by water-rock interactions. Microbial production of methane and sulfate occurred in the sulfide orebody and microbial production of methane and hydrogen sulfide continued in an anoxic plume downgradient from the sulfide ore. Organic carbon concentrations in the parent rock were too low to support microbes. The Rio Tinto system thus represents a new type of subsurface ecosystem with strong relevance for exobiological studies. Commercial drilling was used to reach the aquifer system at 100 m depth and conventional laboratory techniques were used to identify and characterize the biosphere. Then, the life search strategy that led to successful identification of this biosphere was applied to the development of a robotic drilling, core handling, inspection, subsampling, and life detection system built on a prototype planetary lander that was deployed in Rio Tinto Spain in September 2005 to test the capability of a robotic drilling system to search for subsurface life. A remote science team directed the simulation and analyzed the data from the MARTE robotic drill. The results

The Geosphere - Biosphere international program and the global change

International Nuclear Information System (INIS)

Chanin, M.L.

1991-01-01

The objective of the Geosphere-Biosphere International Program (GBIP) is to achieve a correct approach of the various biogeochemical interactions between the different components of the environment (oceans, atmosphere, biosphere). The main themes are: study of the chemical regulation in the global atmosphere and influence of natural and anthropogenic processes on trace element cycles; influence of the oceanic biogeochemical processes on climates and their response to climatic changes; influence of soil utilization modification (especially coastal) on climates and ecosystems; interaction between vegetation and the water cycle; interaction between climatic changes, ecosystems and agricultural productivity; approaches to climate modelling. French component of the GBIP is presented [fr

SKI Project-90. Geosphere calculations using CRYSTAL: Stand-alone and CALIBRE-CRYSTAL-biosphere integrated results

International Nuclear Information System (INIS)

Worgan, K.; Shaw, W.

1992-02-01

In Project-90, the far-field transport of nuclides is assumed to take place in a 200 m long section of rock mass, which starts at the outer boundary of the near-field and ends in a fracture zone. The nuclides are eventually discharged to the biosphere. This document provides an overview of the results obtained with the far-field model CRYSTAL developed by Intera Environmental Division for the Swedish Nuclear Power Inspectorate (SKI). It reports on the results of a series of calculation that have been performed within the SKIs Project-90, and provides some indication of the key parameters for the far field. A more thorough discussion of the implications for performance assessment is given in the Project-90 reports. (au)

WEB-DHM: A distributed biosphere hydrological model developed by coupling a simple biosphere scheme with a hillslope hydrological model

Science.gov (United States)

The coupling of land surface models and hydrological models potentially improves the land surface representation, benefiting both the streamflow prediction capabilities as well as providing improved estimates of water and energy fluxes into the atmosphere. In this study, the simple biosphere model 2...

Development of our laser fusion integration simulation

International Nuclear Information System (INIS)

Li, J.; Zhai, C.; Li, S.; Li, X.; Zheng, W.; Yong, H.; Zeng, Q.; Hang, X.; Qi, J.; Yang, R.; Cheng, J.; Song, P.; Gu, P.; Zhang, A.; An, H.; Xu, X.; Guo, H.; Cao, X.; Mo, Z.; Pei, W.; Jiang, S.; Zhu, S. P.

2013-01-01

In the target design of the Inertial Confinement Fusion (ICF) program, it is common practice to apply radiation hydrodynamics code to study the key physical processes happening in ICF process, such as hohlraum physics, radiation drive symmetry, capsule implosion physics in the radiation-drive approach of ICF. Recently, many efforts have been done to develop our 2D integrated simulation capability of laser fusion with a variety of optional physical models and numerical methods. In order to effectively integrate the existing codes and to facilitate the development of new codes, we are developing an object-oriented structured-mesh parallel code-supporting infrastructure, called JASMIN. Based on two-dimensional three-temperature hohlraum physics code LARED-H and two-dimensional multi-group radiative transfer code LARED-R, we develop a new generation two-dimensional laser fusion code under the JASMIN infrastructure, which enable us to simulate the whole process of laser fusion from the laser beams' entrance into the hohlraum to the end of implosion. In this paper, we will give a brief description of our new-generation two-dimensional laser fusion code, named LARED-Integration, especially in its physical models, and present some simulation results of holhraum. (authors)

An Integrated Simulation Module for Cyber-Physical Automation Systems

Directory of Open Access Journals (Sweden)

Francesco Ferracuti

2016-05-01

Full Text Available The integration of Wireless Sensors Networks (WSNs into Cyber Physical Systems (CPSs is an important research problem to solve in order to increase the performances, safety, reliability and usability of wireless automation systems. Due to the complexity of real CPSs, emulators and simulators are often used to replace the real control devices and physical connections during the development stage. The most widespread simulators are free, open source, expandable, flexible and fully integrated into mathematical modeling tools; however, the connection at a physical level and the direct interaction with the real process via the WSN are only marginally tackled; moreover, the simulated wireless sensor motes are not able to generate the analogue output typically required for control purposes. A new simulation module for the control of a wireless cyber-physical system is proposed in this paper. The module integrates the COntiki OS JAva Simulator (COOJA, a cross-level wireless sensor network simulator, and the LabVIEW system design software from National Instruments. The proposed software module has been called “GILOO” (Graphical Integration of Labview and cOOja. It allows one to develop and to debug control strategies over the WSN both using virtual or real hardware modules, such as the National Instruments Real-Time Module platform, the CompactRio, the Supervisory Control And Data Acquisition (SCADA, etc. To test the proposed solution, we decided to integrate it with one of the most popular simulators, i.e., the Contiki OS, and wireless motes, i.e., the Sky mote. As a further contribution, the Contiki Sky DAC driver and a new “Advanced Sky GUI” have been proposed and tested in the COOJA Simulator in order to provide the possibility to develop control over the WSN. To test the performances of the proposed GILOO software module, several experimental tests have been made, and interesting preliminary results are reported. The GILOO module has been

An Integrated Simulation Module for Cyber-Physical Automation Systems.

Science.gov (United States)

Ferracuti, Francesco; Freddi, Alessandro; Monteriù, Andrea; Prist, Mariorosario

2016-05-05

The integration of Wireless Sensors Networks (WSNs) into Cyber Physical Systems (CPSs) is an important research problem to solve in order to increase the performances, safety, reliability and usability of wireless automation systems. Due to the complexity of real CPSs, emulators and simulators are often used to replace the real control devices and physical connections during the development stage. The most widespread simulators are free, open source, expandable, flexible and fully integrated into mathematical modeling tools; however, the connection at a physical level and the direct interaction with the real process via the WSN are only marginally tackled; moreover, the simulated wireless sensor motes are not able to generate the analogue output typically required for control purposes. A new simulation module for the control of a wireless cyber-physical system is proposed in this paper. The module integrates the COntiki OS JAva Simulator (COOJA), a cross-level wireless sensor network simulator, and the LabVIEW system design software from National Instruments. The proposed software module has been called "GILOO" (Graphical Integration of Labview and cOOja). It allows one to develop and to debug control strategies over the WSN both using virtual or real hardware modules, such as the National Instruments Real-Time Module platform, the CompactRio, the Supervisory Control And Data Acquisition (SCADA), etc. To test the proposed solution, we decided to integrate it with one of the most popular simulators, i.e., the Contiki OS, and wireless motes, i.e., the Sky mote. As a further contribution, the Contiki Sky DAC driver and a new "Advanced Sky GUI" have been proposed and tested in the COOJA Simulator in order to provide the possibility to develop control over the WSN. To test the performances of the proposed GILOO software module, several experimental tests have been made, and interesting preliminary results are reported. The GILOO module has been applied to a smart home

Integrated Design Validation: Combining Simulation and Formal Verification for Digital Integrated Circuits

Directory of Open Access Journals (Sweden)

Lun Li

2006-04-01

Full Text Available The correct design of complex hardware continues to challenge engineers. Bugs in a design that are not uncovered in early design stages can be extremely expensive. Simulation is a predominantly used tool to validate a design in industry. Formal verification overcomes the weakness of exhaustive simulation by applying mathematical methodologies to validate a design. The work described here focuses upon a technique that integrates the best characteristics of both simulation and formal verification methods to provide an effective design validation tool, referred as Integrated Design Validation (IDV. The novelty in this approach consists of three components, circuit complexity analysis, partitioning based on design hierarchy, and coverage analysis. The circuit complexity analyzer and partitioning decompose a large design into sub-components and feed sub-components to different verification and/or simulation tools based upon known existing strengths of modern verification and simulation tools. The coverage analysis unit computes the coverage of design validation and improves the coverage by further partitioning. Various simulation and verification tools comprising IDV are evaluated and an example is used to illustrate the overall validation process. The overall process successfully validates the example to a high coverage rate within a short time. The experimental result shows that our approach is a very promising design validation method.

1988 Pilot Institute on Global Change on trace gases and the biosphere

Energy Technology Data Exchange (ETDEWEB)

Eddy, J.A.; Moore, B. III

1998-07-01

This proposal seeks multi-agency funding to conduct an international, multidisciplinary 1988 Pilot Institute on Global Change to take place from August 7 through 21, 1988, on the topic: Trace Gases and the Biosphere. The institute, to be held in Snowmass, Colorado, is envisioned as a pilot version of a continuing series of institutes on Global Change (IGC). This proposal seeks support for the 1988 pilot institute only. The concept and structure for the continuing series, and the definition of the 1988 pilot institute, were developed at an intensive and multidisciplinary Summer Institute Planning Meeting in Boulder, Colorado, on August 24--25, 1987. The theme for the 1988 PIGC, Trace Gases and the Biosphere, will focus a concerted, high-level multidisciplinary effort on a scientific problem central to the Global Change Program. Dramatic year-to-year increases in the global concentrations of radiatively-active trace gases such as methane and carbon dioxide are now well documented. The predicted climatic effects of these changes lend special urgency to efforts to study the biospheric sources and sinks of these gases and to clarify their interactions and role in the geosphere-biosphere system.

Putting the Deep Biosphere on the Map for Oceanography Courses: Gas Hydrates As a Case Study for the Deep Biosphere

Science.gov (United States)

Sikorski, J. J.; Briggs, B. R.

2014-12-01

The ocean is essential for life on our planet. It covers 71% of the Earth's surface, is the source of the water we drink, the air we breathe, and the food we eat. Yet, the exponential growth in human population is putting the ocean and thus life on our planet at risk. However, based on student evaluations from our introductory oceanography course it is clear that our students have deficiencies in ocean literacy that impact their ability to recognize that the ocean and humans are inextricably connected. Furthermore, life present in deep subsurface marine environments is also interconnected to the study of the ocean, yet the deep biosphere is not typically covered in undergraduate oceanography courses. In an effort to improve student ocean literacy we developed an instructional module on the deep biosphere focused on gas hydrate deposits. Specifically, our module utilizes Google Earth and cutting edge research about microbial life in the ocean to support three inquiry-based activities that each explore different facets of gas hydrates (i.e. environmental controls, biologic controls, and societal implications). The relevant nature of the proposed module also makes it possible for instructors of introductory geology courses to modify module components to discuss related topics, such as climate, energy, and geologic hazards. This work, which will be available online as a free download, is a solid contribution toward increasing the available teaching resources focused on the deep biosphere for geoscience educators.

Biosphere reserves – learning sites of sustainable development?

Czech Academy of Sciences Publication Activity Database

Kušová, Drahomíra; Těšitel, Jan; Bartoš, Michael

2008-01-01

Roč. 14, č. 3 (2008), s. 221-234 ISSN 1211-7420 Institutional research plan: CEZ:AV0Z60870520 Keywords : nature protection * learning sites * biosphere reserves * sustainable development Subject RIV: DO - Wilderness Conservation

Earth's Early Biosphere and the Biogeochemical Carbon Cycle

Science.gov (United States)

DesMarais, David

2004-01-01

Our biosphere has altered the global environment principally by influencing the chemistry of those elements most important for life, e g., C, N, S, O, P and transition metals (e.g., Fe and Mn). The coupling of oxygenic photosynthesis with the burial in sediments of photosynthetic organic matter, and with the escape of H2 to space, has increased the state of oxidation of the Oceans and atmosphere. It has also created highly reduced conditions within sedimentary rocks that have also extensively affected the geochemistry of several elements. The decline of volcanism during Earth's history reduced the flow of reduced chemical species that reacted with photosynthetically produced O2. The long-term net accumulation of photosynthetic O2 via biogeochemical processes has profoundly influenced our atmosphere and biosphere, as evidenced by the O2 levels required for algae, multicellular life and certain modem aerobic bacteria to exist. When our biosphere developed photosynthesis, it tapped into an energy resource that was much larger than the energy available from oxidation-reduction reactions associated with weathering and hydrothermal activity. Today, hydrothermal sources deliver globally (0.13-1.1)x10(exp l2) mol yr(sup -1) of reduced S, Fe(2+), Mn(2+), H2 and CH4; this is estimated to sustain at most about (0.2-2)xl0(exp 12)mol C yr(sup -1) of organic carbon production by chemautotrophic microorganisms. In contrast, global photosynthetic productivity is estimated to be 9000x10(exp 12) mol C yr(sup -1). Thus, even though global thermal fluxes were greater in the distant geologic past than today, the onset of oxygenic photosynthesis probably increased global organic productivity by some two or more orders of magnitude. This enormous productivity materialized principally because oxygenic photosynthesizers unleashed a virtually unlimited supply of reduced H that forever freed life from its sole dependence upon abiotic sources of reducing power such as hydrothermal emanations

Information in the Biosphere: Biological and Digital Worlds.

Science.gov (United States)

Gillings, Michael R; Hilbert, Martin; Kemp, Darrell J

2016-03-01

Evolution has transformed life through key innovations in information storage and replication, including RNA, DNA, multicellularity, and culture and language. We argue that the carbon-based biosphere has generated a cognitive system (humans) capable of creating technology that will result in a comparable evolutionary transition. Digital information has reached a similar magnitude to information in the biosphere. It increases exponentially, exhibits high-fidelity replication, evolves through differential fitness, is expressed through artificial intelligence (AI), and has facility for virtually limitless recombination. Like previous evolutionary transitions, the potential symbiosis between biological and digital information will reach a critical point where these codes could compete via natural selection. Alternatively, this fusion could create a higher-level superorganism employing a low-conflict division of labor in performing informational tasks. Copyright © 2015 Elsevier Ltd. All rights reserved.

Illstrative probabilistic biosphere model for Yucca Mountain individual risk calculations

International Nuclear Information System (INIS)

Wilems, R.E.

1994-01-01

The proposed EPA Standards for the disposal of spent fuel, high-level and transuranic radioactive waste prescribe future biosphere--one in which no sustained human activity occurs inside the controlled zone, yet sustained use of groundwater occurs just outside the controlled zone boundary. Performance assessments have generally assumed a person at this location extracts all his water needs directly from the projected contaminated plume for all of his life. Dose to this maximally-exposed individual is too conservative a measure of performance for a nuclear waste repository and does not reflect the isolation characteristics of a site. A better measure is individual risk in which uncertainties in biosphere characteristics for the longer periods of performance, for a site like Yucca Mountain only those characteristics associated with well water scenarios need be prescribed. Such a prescription of the biosphere is appropriate because the goal of the regulations is to provide indicators of future performance so the regulators can make a responsible decision regarding reasonable assurance of public health and safety

Socio-economic conditions in selected biosphere reserves

Czech Academy of Sciences Publication Activity Database

Kušová, Drahomíra; Těšitel, Jan; Matějka, K.; Bartoš, Michael

2006-01-01

Roč. 12, č. 3 (2006), s. 157-169 ISSN 1211-7420 R&D Projects: GA MŽP(CZ) SM/610/3/03 Institutional research plan: CEZ:AV0Z60870520 Keywords : nature protection * socio-economic conditions * biosphere reserves * sustainable development Subject RIV: EH - Ecology, Behaviour

Using atmospheric CO2 data to assess a simplified carbon-climate simulation for the 20th century

International Nuclear Information System (INIS)

Law, Rachel M.; Kowalczyk, Eva A.; Wangs, Ying-Ping

2006-01-01

The CSIRO biosphere model has been coupled to an atmosphere model and a simulation has been performed for the 20th century. Both biosphere and atmosphere are forced with global CO 2 concentration and the atmosphere is also forced with prescribed sea surface temperatures. The simulation follows the C4MIP Phase 1 protocol. We assess the model simulation using atmospheric CO 2 data. Mauna Loa growth rate is well simulated from 1980 but overestimated before that time. The interannual variations in growth rate are reasonably reproduced. Seasonal cycles are underestimated in northern mid-latitudes and are out of phase in the southern hemisphere. The north-south gradient of annual mean CO 2 is substantially overestimated due to a northern hemisphere net biosphere source and a southern tropical sink. Diurnal cycles at three northern hemisphere locations are larger than observed in many months, most likely due to larger respiration than observed

Ship space to database: emerging infrastructures for studies of the deep subseafloor biosphere

Directory of Open Access Journals (Sweden)

Peter T. Darch

2016-11-01

Full Text Available Background An increasing array of scientific fields face a “data deluge.” However, in many fields data are scarce, with implications for their epistemic status and ability to command funding. Consequently, they often attempt to develop infrastructure for data production, management, curation, and circulation. A component of a knowledge infrastructure may serve one or more scientific domains. Further, a single domain may rely upon multiple infrastructures simultaneously. Studying how domains negotiate building and accessing scarce infrastructural resources that they share with other domains will shed light on how knowledge infrastructures shape science. Methods We conducted an eighteen-month, qualitative study of scientists studying the deep subseafloor biosphere, focusing on the Center for Dark Energy Biosphere Investigations (C-DEBI and the Integrated Ocean Drilling Program (IODP and its successor, the International Ocean Discovery Program (IODP2. Our methods comprised ethnographic observation, including eight months embedded in a laboratory, interviews (n = 49, and document analysis. Results Deep subseafloor biosphere research is an emergent domain. We identified two reasons for the domain’s concern with data scarcity: limited ability to pursue their research objectives, and the epistemic status of their research. Domain researchers adopted complementary strategies to acquire more data. One was to establish C-DEBI as an infrastructure solely for their domain. The second was to use C-DEBI as a means to gain greater access to, and reconfigure, IODP/IODP2 to their advantage. IODP/IODP2 functions as infrastructure for multiple scientific domains, which creates competition for resources. C-DEBI is building its own data management infrastructure, both to acquire more data from IODP and to make better use of data, once acquired. Discussion Two themes emerge. One is data scarcity, which can be understood only in relation to a domain�

A GoldSim Based Biosphere Assessment Model for a HLW Repository

International Nuclear Information System (INIS)

Lee, Youn-Myoung; Hwang, Yong-Soo; Kang, Chul-Hyung

2007-01-01

To demonstrate the performance of a repository, the dose exposure to a human being due to nuclide releases from a repository should be evaluated and the results compared to the dose limit presented by the regulatory bodies. To evaluate a dose rate to an individual due to a long-term release of nuclides from a HLW repository, biosphere assessment models and their implemented codes such as ACBIO1 and ACBIO2 have been developed with the aid of AMBER during the last few years. BIOMASS methodology has been adopted for a HLW repository currently being considered in Korea, which has a similar concept to the Swedish KBS-3 HLW repository. Recently, not just only for verifying the purpose for biosphere assessment models but also for varying the possible alternatives to assess the consequences in a biosphere due to a HLW repository, another version of the assessment modesl has been newly developed in the frame of development programs for a total system performance assessment modeling tool by utilizing GoldSim. Through a current study, GoldSim approach for a biosphere modeling is introduced. Unlike AMBER by which a compartment scheme can be rather simply constructed with an appropriate transition rate between compartments, GoldSim was designed to facilitate the object-oriented modules by which specific models can be addressed in an additional manner, like solving jig saw puzzles

Integrating Medical Simulation Into the Physician Assistant Physiology Curriculum.

Science.gov (United States)

Li, Lixin; Lopes, John; Zhou, Joseph Yi; Xu, Biao

2016-12-01

Medical simulation has recently been used in medical education, and evidence indicates that it is a valuable tool for teaching and evaluation. Very few studies have evaluated the integration of medical simulation in medical physiology education, particularly in PA programs. This study was designed to assess the value of integrating medical simulation into the PA physiology curriculum. Seventy-five students from the PA program at Central Michigan University participated in this study. Mannequin-based simulation was used to simulate a patient with hemorrhagic shock and congestive heart failure to demonstrate the Frank-Starling force and cardiac function curve. Before and after the medical simulation, students completed a questionnaire as a self-assessment. A knowledge test was also delivered after the simulation. Our study demonstrated a significant improvement in student confidence in understanding congestive heart failure, hemorrhagic shock, and the Frank-Starling curve after the simulation. Medical simulation may be an effective way to enhance basic science learning experiences for students and an ideal supplement to traditional, lecture-based teaching in PA education.

A summary of biospheric research 1975-1997

Energy Technology Data Exchange (ETDEWEB)

Edlund, O.; Bergstroem, U.; Hallberg, B.; Karlsson, Sara [Studsvik Eco and Safety AB, Nykoeping (Sweden)

1999-12-01

The aim of this study is to present a summary of the work performed within the frame of SKB's biosphere programme during 1975 - 1997. The studies focused on field studies and theoretical model development. Important problems identified during this time period are pointed out. Summaries of the biospheric parts of the safety analyses performed since 1977 are given. Models are described as well as basic assumptions. Already the first analysis had an overall approach including dispersion from local to global zones with multiple exposure pathways. Compartment models have been used whereby the rate constants in the first assessments were mostly based on observed redistribution of radionuclides in nature. During the years emphasis has been laid on the description of processes mathematically and additional processes have been included in the models. In general, standard biospheres with constant environmental conditions were applied with focus on releases of radionuclides to wells, lakes and coastal areas. Drinking water has shown to be an important exposure pathway but not always the dominant one. Some screening calculations performed showed that peat bogs may be important recipients when doses to humans are concerned. The field studies initially focused on the naturally existing isotopes of U and Ra. A lot of studies were performed to gain data concerning the levels of these radionuclides in soils and waters. The studies also obtained information about back-ground values and the distribution between various biospheric components which was used to support model assumptions. A special sampling programme with the purpose to outline influence of drying up of lakes on the dose to individuals of critical group was also performed. The dose calculations showed that the doses could increase two orders of magnitude for immobile elements when the lake had dried up. Investigations of the natural abundance of radionuclides in soil and flora were performed later. After the

A summary of biospheric research 1975-1997

International Nuclear Information System (INIS)

Edlund, O.; Bergstroem, U.; Hallberg, B.; Karlsson, Sara

1999-12-01

The aim of this study is to present a summary of the work performed within the frame of SKB's biosphere programme during 1975 - 1997. The studies focused on field studies and theoretical model development. Important problems identified during this time period are pointed out. Summaries of the biospheric parts of the safety analyses performed since 1977 are given. Models are described as well as basic assumptions. Already the first analysis had an overall approach including dispersion from local to global zones with multiple exposure pathways. Compartment models have been used whereby the rate constants in the first assessments were mostly based on observed redistribution of radionuclides in nature. During the years emphasis has been laid on the description of processes mathematically and additional processes have been included in the models. In general, standard biospheres with constant environmental conditions were applied with focus on releases of radionuclides to wells, lakes and coastal areas. Drinking water has shown to be an important exposure pathway but not always the dominant one. Some screening calculations performed showed that peat bogs may be important recipients when doses to humans are concerned. The field studies initially focused on the naturally existing isotopes of U and Ra. A lot of studies were performed to gain data concerning the levels of these radionuclides in soils and waters. The studies also obtained information about back-ground values and the distribution between various biospheric components which was used to support model assumptions. A special sampling programme with the purpose to outline influence of drying up of lakes on the dose to individuals of critical group was also performed. The dose calculations showed that the doses could increase two orders of magnitude for immobile elements when the lake had dried up. Investigations of the natural abundance of radionuclides in soil and flora were performed later. After the Chernobyl

Analysis of Low-Biomass Microbial Communities in the Deep Biosphere.

Science.gov (United States)

Morono, Y; Inagaki, F

2016-01-01

Over the past few decades, the subseafloor biosphere has been explored by scientific ocean drilling to depths of about 2.5km below the seafloor. Although organic-rich anaerobic sedimentary habitats in the ocean margins harbor large numbers of microbial cells, microbial populations in ultraoligotrophic aerobic sedimentary habitats in the open ocean gyres are several orders of magnitude less abundant. Despite advances in cultivation-independent molecular ecological techniques, exploring the low-biomass environment remains technologically challenging, especially in the deep subseafloor biosphere. Reviewing the historical background of deep-biosphere analytical methods, the importance of obtaining clean samples and tracing contamination, as well as methods for detecting microbial life, technological aspects of molecular microbiology, and detecting subseafloor metabolic activity will be discussed. Copyright © 2016 Elsevier Inc. All rights reserved.

Post-closure biosphere assessment modelling: comparison of complex and more stylised approaches

Energy Technology Data Exchange (ETDEWEB)

Walke, Russell C. [Quintessa Limited, The Hub, 14 Station Road, Henley-on-Thames (United Kingdom); Kirchner, Gerald [University of Hamburg, ZNF, Beim Schlump 83, 20144 Hamburg (Germany); Xu, Shulan; Dverstorp, Bjoern [Swedish Radiation Safety Authority, SE-171 16 Stockholm (Sweden)

2014-07-01

Geological facilities are the preferred option for disposal of high-level radioactive waste, due to their potential to provide isolation from the surface environment (biosphere) on very long time scales. Safety cases developed in support of geological disposal include assessment of potential impacts on humans and wildlife in order to demonstrate compliance with regulatory criteria. As disposal programmes move from site-independent/generic assessments through site selection to applications for construction/operation and closure, the degree of understanding of the present-day site increases, together with increased site-specific information. Assessments need to strike a balance between simple models and more complex approaches that draw more extensively on this site-specific information. This paper explores the relative merits of complex versus more stylised biosphere models in the context of a site-specific assessment. The complex biosphere model was developed by the Swedish Nuclear Fuel and Waste Management Co (SKB) for the Formark candidate site for a spent nuclear fuel repository in Sweden. SKB's model is built on a landscape evolution model, whereby radionuclide releases to distinct hydrological basins/sub-catchments (termed 'objects') are represented as they evolve through land rise and climate change. The site is located on the Baltic coast with a terrestrial landscape including lakes, mires, forest and agriculture. The land at the site is projected to continue to rise due to post-glacial uplift leading to ecosystem transitions in excess of ten thousand years. The simple biosphere models developed for this study include the most plausible transport processes and represent various types of ecosystem. The complex biosphere models adopt a relatively coarse representation of the near-surface strata, which is shown to be conservative, but also to under-estimate the time scale required for potential doses to reach equilibrium with radionuclide fluxes

The biosphere at Laxemar. Data, assumptions and models used in the SR-Can assessment

Energy Technology Data Exchange (ETDEWEB)

Karlsson, Sara; Kautsky, Ulrik; Loefgren, Anders; Soederbaeck, Bjoern [eds.

2006-10-15

This is essentially a compilation of a variety of reports concerning the site investigations, the research activities and information derived from other sources important for the safety assessment. The main objective is to present prerequisites, methods and data used, in the biosphere modelling for the safety assessment SR-Can at the Laxemar site. A major part of the report focuses on how site-specific data are used, recalculated or modified in order to be applicable in the safety assessment context; and the methods and sub-models that are the basis for the biosphere modelling. Furthermore, the assumptions made as to the future states of surface ecosystems are mainly presented in this report. A similar report is provided for the Forsmark area. This report summarises the method adopted for safety assessment following a radionuclide release into the biosphere. The approach utilises the information about the site as far as possible and presents a way of calculating risk to humans. A central tool in the work is the description of the topography, where there is good understanding of the present conditions and the development over time is fairly predictable. The topography affects surface hydrology, sedimentation, size of drainage areas and the characteristics of ecosystems. Other parameters are human nutritional intake, which is assumed to be constant over time, and primary production (photosynthesis), which also is a fairly constant parameter over time. The Landscape Dose Factor approach (LDF) gives an integrated measure for the site and also resolves the issues relating to the size of the group with highest exposure. If this approach is widely accepted as method, still some improvements and refinement are necessary in collecting missing site data, reanalysing site data, reviewing radionuclide specific data, reformulating ecosystem models and evaluating the results with further sensitivity analysis.

The biosphere at Laxemar. Data, assumptions and models used in the SR-Can assessment

International Nuclear Information System (INIS)

Karlsson, Sara; Kautsky, Ulrik; Loefgren, Anders; Soederbaeck, Bjoern

2006-10-01

This is essentially a compilation of a variety of reports concerning the site investigations, the research activities and information derived from other sources important for the safety assessment. The main objective is to present prerequisites, methods and data used, in the biosphere modelling for the safety assessment SR-Can at the Laxemar site. A major part of the report focuses on how site-specific data are used, recalculated or modified in order to be applicable in the safety assessment context; and the methods and sub-models that are the basis for the biosphere modelling. Furthermore, the assumptions made as to the future states of surface ecosystems are mainly presented in this report. A similar report is provided for the Forsmark area. This report summarises the method adopted for safety assessment following a radionuclide release into the biosphere. The approach utilises the information about the site as far as possible and presents a way of calculating risk to humans. A central tool in the work is the description of the topography, where there is good understanding of the present conditions and the development over time is fairly predictable. The topography affects surface hydrology, sedimentation, size of drainage areas and the characteristics of ecosystems. Other parameters are human nutritional intake, which is assumed to be constant over time, and primary production (photosynthesis), which also is a fairly constant parameter over time. The Landscape Dose Factor approach (LDF) gives an integrated measure for the site and also resolves the issues relating to the size of the group with highest exposure. If this approach is widely accepted as method, still some improvements and refinement are necessary in collecting missing site data, reanalysing site data, reviewing radionuclide specific data, reformulating ecosystem models and evaluating the results with further sensitivity analysis

IIASA's climate-vegetation-biogeochemical cycle module as a part of an integrated model for climate change

International Nuclear Information System (INIS)

Ganopolski, A.V.; Jonas, M.; Krabec, J.; Olendrzynski, K.; Petoukhov, V.K.; Venevsky, S.V.

1994-01-01

The main objective of this study is the development of a hierarchy of coupled climate biosphere models with a full description of the global biogeochemical cycles. These models are planned for use as the core of a set of integrated models of climate change and they will incorporate the main elements of the Earth system (atmosphere, hydrosphere, pedosphere and biosphere) linked with each other (and eventually with the antroposphere) through the fluxes of heat, momentum, water and through the global biogeochemical cycles of carbon and nitrogen. This set of integrated models can be considered to fill the gap between highly simplified integrated models of climate change and very sophisticated and computationally expensive coupled models, developed on the basis of general circulation models (GCMs). It is anticipated that this range of integrated models will be an effective tool for investigating the broad spectrum of problems connected with the coexistence of human society and biosphere

Integrated Instrument Simulator Suites for Earth Science

Science.gov (United States)

Tanelli, Simone; Tao, Wei-Kuo; Matsui, Toshihisa; Hostetler, Chris; Hair, John; Butler, Carolyn; Kuo, Kwo-Sen; Niamsuwan, Noppasin; Johnson, Michael P.; Jacob, Joseph C.;

The Role of the Biosphere in a Safety Case. IGSC topical session at the third IGSC Meeting

International Nuclear Information System (INIS)

Russell, Sean; Voinis, Sylvie; Alonso, Jesus; Van Luik, Abraham E.

2002-01-01

The safety case is a collection of arguments at a given stage of repository development in support of the long-term safety of the repository. The safety case comprises the findings of a safety assessment and a statement of confidence in these findings. The biosphere is one of the features of a geologic repository system for the long-term management of radioactive waste. The biosphere is important in a safety assessment since it is the place where humans and most organisms live and where regulations are made. Generally speaking, the biosphere is more dynamic than the geosphere and its evolution with time can significantly affect dose estimations and potential impacts of a geologic repository (e.g., climate change, glaciation, civilisation movement, etc.). That is, other parts of the repository system (vault, geosphere) are more robust or constant in time than the ever changing biosphere. Most of the variability associated with future events in the biosphere is driven by climate change. Climatic change and the characteristics of future societies are important sources of uncertainties Biosphere. Uncertainty can be addressed using reference or example biospheres, or alternative safety indicators such as radionuclide concentration or radionuclide flux from the geosphere to the surface biosphere (as indicated by the recent regulatory guidance in Finland), or by comparing predicted radionuclide concentrations from a repository with background levels in the environment. Thus, a Topical Session that focused on the 'Role of the Biosphere in a Safety Case' was organised in the framework of the 3. plenary meeting of the IGSC. This Topical Session reviewed the role of the biosphere in a safety case for geologic disposal of radioactive waste and discusses recent developments in international programs (IAEA Biomass, EC Bioclim), the views of regulators and the strategies being adopted by several implementers for incorporating the biosphere in their safety assessments

MAN IN BIOSPHERE RESERVE: A REMOTE SENSING STUDY IN SIMILIPAL, ORISSA

Directory of Open Access Journals (Sweden)

A. Biswal

2012-08-01

Full Text Available The Similipal is a densely forested hill-range in the heart of Mayurbhanj district,Orissa, lying close to the eastern-most end of the Easternghats. Similipal Biosphere Reserve is located in the Mahanadian Biogeographical Region and within the Biotic Province, Chhotanagpur Plateau.There are 4 villages in the core and 61 villages in the buffer area of the biosphere reserve .Agriculture is not well developed and employment opportunities are very poor , most of the people derive their income from collection of NTFP and sale of firewood and timber. A collaborative work is carried out by Regional Remote Sensing Centre(East and Anthropological survey of India,Kolkata to study the impact of those four villages in the core area of SBR on the conservation of natural resources over the decades.Change in vegetation density as measured by NDVI over the decades is analysed to study the impact of these villages on the core area of Similipal Biosphere Reserve.

BIOSPHERE MODELING AT YUCCA MOUNTAIN, NEVADA

International Nuclear Information System (INIS)

NING LIU; JEFFERY, J.; TAPPEN, DE WU; CHAO-HSIUNG TUNG

1998-01-01

The objectives of the biosphere modeling efforts are to assess how radionuclides potentially released from the proposed repository could be transported through a variety of environmental media. The study of these transport mechanisms, referred to as pathways, is critical in calculating the potential radiation dose to man. Since most of the existing and pending regulations applicable to the Project are radiation dose based standards, the biosphere modeling effort will provide crucial technical input to support the Viability Assessment (VA), the Working Draft of License Application (WDLA), and the Environmental Impact Statement (EIS). In 1982, the Nuclear Waste Policy Act (NWPA) was enacted into law. This federal law, which was amended in 1987, addresses the national issue of geologic disposal of high-level nuclear waste generated by commercial nuclear power plants, as well as defense programs during the past few decades. As required by the law, the Department of Energy (DOE) is conducting a site characterization project at Yucca Mountain, Nevada, approximately 100 miles northwest of Las Vegas, Nevada, to determine if the site is suitable for the nation's first high-level nuclear waste repository

The natural radioactivity of the biosphere

Energy Technology Data Exchange (ETDEWEB)

Pertsov, L A

1967-07-01

Of the approximately 1200 isotopes presently known more than 900 are radioactive. The nuclei of these isotopes are unstable and decay spontaneously emitting ionizing gamma-, alpha- or beta-radiation. The overwhelming majority of known radioactive isotopes have been obtained artificially; only a few are natural. Numerous investigations have shown that many of the natural radioactive isotopes can be grouped into three radioactive families. Each such family is characterized by the existence of one long-lived isotope - the family parent, one gaseous isotope of radon, intermediate radioactive decay products and final stable isotopes of atomic weights 206, 207 and 208. No such generic relationship has been established among the remaining natural radioactive isotopes. The purpose of the book, in contrast to some recent review works, is to present, in addition to a summary of reference data characterizing the radioactivity levels of various components of the biosphere, a description of those phenomena and regularities which will apparently make it possible to understand more completely the basic dynamics of the natural radioactivity of the biosphere and, consequently, contribute to a more correct interpretation of radiation-hygiene in each specific case.

The natural radioactivity of the biosphere

International Nuclear Information System (INIS)

Pertsov, L.A.

1967-01-01

Of the approximately 1200 isotopes presently known more than 900 are radioactive. The nuclei of these isotopes are unstable and decay spontaneously emitting ionizing gamma-, alpha- or beta-radiation. The overwhelming majority of known radioactive isotopes have been obtained artificially; only a few are natural. Numerous investigations have shown that many of the natural radioactive isotopes can be grouped into three radioactive families. Each such family is characterized by the existence of one long-lived isotope - the family parent, one gaseous isotope of radon, intermediate radioactive decay products and final stable isotopes of atomic weights 206, 207 and 208. No such generic relationship has been established among the remaining natural radioactive isotopes. The purpose of the book, in contrast to some recent review works, is to present, in addition to a summary of reference data characterizing the radioactivity levels of various components of the biosphere, a description of those phenomena and regularities which will apparently make it possible to understand more completely the basic dynamics of the natural radioactivity of the biosphere and, consequently, contribute to a more correct interpretation of radiation-hygiene in each specific case

Predicting ecosystem dynamics at regional scales: an evaluation of a terrestrial biosphere model for the forests of northeastern North America.

Science.gov (United States)

Medvigy, David; Moorcroft, Paul R

2012-01-19

Terrestrial biosphere models are important tools for diagnosing both the current state of the terrestrial carbon cycle and forecasting terrestrial ecosystem responses to global change. While there are a number of ongoing assessments of the short-term predictive capabilities of terrestrial biosphere models using flux-tower measurements, to date there have been relatively few assessments of their ability to predict longer term, decadal-scale biomass dynamics. Here, we present the results of a regional-scale evaluation of the Ecosystem Demography version 2 (ED2)-structured terrestrial biosphere model, evaluating the model's predictions against forest inventory measurements for the northeast USA and Quebec from 1985 to 1995. Simulations were conducted using a default parametrization, which used parameter values from the literature, and a constrained model parametrization, which had been developed by constraining the model's predictions against 2 years of measurements from a single site, Harvard Forest (42.5° N, 72.1° W). The analysis shows that the constrained model parametrization offered marked improvements over the default model formulation, capturing large-scale variation in patterns of biomass dynamics despite marked differences in climate forcing, land-use history and species-composition across the region. These results imply that data-constrained parametrizations of structured biosphere models such as ED2 can be successfully used for regional-scale ecosystem prediction and forecasting. We also assess the model's ability to capture sub-grid scale heterogeneity in the dynamics of biomass growth and mortality of different sizes and types of trees, and then discuss the implications of these analyses for further reducing the remaining biases in the model's predictions.

Preliminary Feasibility Study of a Hybrid Solar and Modular Pumped Storage Hydro System at Biosphere 2

Energy Technology Data Exchange (ETDEWEB)

Lansey, Kevin [Univ. of Arizona, Tucson, AZ (United States); Hortsman, Chris [Univ. of Arizona, Tucson, AZ (United States)

2016-10-01

In this study, the preliminary feasibility of a hybrid solar and modular pumped storage system designed for high energy independence at Biosphere 2 is assessed. The system consists of an array of solar PV panels that generate electricity during the day to power both Biosphere 2 and a pump that sends water through a pipe to a tank at a high elevation. When solar power is not available, the water is released back down the pipe towards a tank at a lower elevation, where it passes through a hydraulic water turbine to generate hydroelectricity to power Biosphere 2. The hybrid system is sized to generate and store enough energy to enable Biosphere 2 to operate without a grid interconnection on an average day.

Biosphere modelling for the safety assessment of high-level radioactive waste disposal in the Japanese H12 assessment

International Nuclear Information System (INIS)

Kato, Tomoko; Suzuki, Yuji; Ishiguro, Katsuhiko; Naito, Morimasa; Ishiguro, Katsuhiko; Ikeda, Takao; Little, Richard H.; Smith, Graham M.

2002-01-01

JNC has an on-going programme of research and development relating to the safety assessment of the deep geological disposal system of high-level radioactive waste (HLW). In the safety assessment of a HLW disposal system, it is often necessary to estimate future radiological impacts on human beings (e.g. radiation dose). In order to estimate dose, consideration needs to be given to the surface environment (biosphere) into which future releases of radionuclides might occur and to the associated future human behaviour. However, for a deep repository, such releases might not occur for many thousands of years after disposal. Over such timescales, it is not possible to predict with any certainty how the biosphere and human behaviour will evolve. To avoid endless speculation aimed at reducing such uncertainty, the reference biosphere le concept has been developed for use in the safety assessment of HLW disposal. The Reference Biospheres Methodology was originally developed by the BIOMOVS II Reference Biospheres Working Group and subsequently enhanced within Theme 1 of the BIOMASS programme. As the aim of the H12 assessment with a hypothetical HLW disposal system was to demonstrate the technical feasibility and reliability of the Japanese disposal concept for a range of geological and surface environments, some assessment specific reference biospheres were developed for the biosphere modelling in the H12 assessment using an approach consistent with the BIOMOVS II/BIOMASS approach. They have been used to derive factors to convert the radionuclide flux from a geosphere to a biosphere into a dose. The influx to dose conversion factor also have been derived for a range of different geosphere-biosphere interfaces (well, river and marine) and potential exposure groups (farming, freshwater-fishing and marine-fishing). This paper summarises the approach used for the derivation of the influx to dose conversion factor also for the range of geosphere-biosphere interfaces and

Integration of virtual control units in the total vehicle simulation; Integration virtueller Steuergeraete in die Gesamtfahrzeugsimulation

Energy Technology Data Exchange (ETDEWEB)

Soppa, Andreas; Lund, Christoph [Volkswagen AG, Wolfsburg (Germany)

2012-11-01

In this article the simulation of information and energetics of vehicles with model-integration of electronic control units (ECU) in a simulation, based on the coupling of physical and control components of the total vehicle are investigated. For that simplified models of ECU's, simulating the functionally of the real ECU's, were used. The integration of virtual EUC's in models of full vehicles makes it possible to simulate the energetics for different driving cycles in a realistic way. By better simulation results an evaluation of physical components and the amount of functions are possible. In the area of the thermal management of vehicles by this analyses and optimizations of functions become possible. This article shows the advantages of embedding virtual ECU's in simulations of full vehicles. (orig.)

Biosphere reserves - an attempt to form sustainable landscapes (A case study of three biosphere reserves in the Czech Republic)

Czech Academy of Sciences Publication Activity Database

Kušová, Drahomíra; Těšitel, Jan; Matějka, K.; Bartoš, Michael

2008-01-01

Roč. 84, č. 1 (2008), s. 38-51 ISSN 0169-2046 R&D Projects: GA MŽP(CZ) SM/610/3/03 Institutional research plan: CEZ:AV0Z60870520 Keywords : biosphere reserve * nature protection * socio-economic development * sustainable development * triangulation Subject RIV: DO - Wilderness Conservation Impact factor: 1.953, year: 2008

Characterizing biospheric carbon balance using CO2 observations from the OCO-2 satellite

Directory of Open Access Journals (Sweden)

S. M. Miller

2018-05-01

Full Text Available NASA's Orbiting Carbon Observatory 2 (OCO-2 satellite launched in summer of 2014. Its observations could allow scientists to constrain CO2 fluxes across regions or continents that were previously difficult to monitor. This study explores an initial step toward that goal; we evaluate the extent to which current OCO-2 observations can detect patterns in biospheric CO2 fluxes and constrain monthly CO2 budgets. Our goal is to guide top-down, inverse modeling studies and identify areas for future improvement. We find that uncertainties and biases in the individual OCO-2 observations are comparable to the atmospheric signal from biospheric fluxes, particularly during Northern Hemisphere winter when biospheric fluxes are small. A series of top-down experiments indicate how these errors affect our ability to constrain monthly biospheric CO2 budgets. We are able to constrain budgets for between two and four global regions using OCO-2 observations, depending on the month, and we can constrain CO2 budgets at the regional level (i.e., smaller than seven global biomes in only a handful of cases (16 % of all regions and months. The potential of the OCO-2 observations, however, is greater than these results might imply. A set of synthetic data experiments suggests that retrieval errors have a salient effect. Advances in retrieval algorithms and to a lesser extent atmospheric transport modeling will improve the results. In the interim, top-down studies that use current satellite observations are best-equipped to constrain the biospheric carbon balance across only continental or hemispheric regions.

Integrated simulation of emergency response in disasters

International Nuclear Information System (INIS)

Kanno, Taro; Furuta, Kazuo

2005-01-01

An integrated simulation system of emergency response in disasters is under development that can consider various factors of disasters, such as disaster phenomena, activities of response organizations, resident behavior, and their environment. The aim of this system is to provide support for design and assessment of disaster management systems. This paper introduces the conceptual design of the entire system and presents simulators of organizational behavior in nuclear and earthquake disasters. (author)

Recent developments in assessment of long-term radionuclide behavior in the geosphere-biosphere subsystem.

Science.gov (United States)

Smith, G M; Smith, K L; Kowe, R; Pérez-Sánchez, D; Thorne, M; Thiry, Y; Read, D; Molinero, J

2014-05-01

Decisions on permitting, controlling and monitoring releases of radioactivity into the environment rely on a great variety of factors. Important among these is the prospective assessment of radionuclide behavior in the environment, including migration and accumulation among and within specific environmental media, and the resulting environmental and human health impacts. Models and techniques to undertake such assessments have been developed over several decades based on knowledge of the ecosystems involved, as well as monitoring of previous radionuclide releases to the environment, laboratory experiments and other related research. This paper presents developments in the assessment of radiation doses and related research for some of the key radionuclides identified as of potential significance in the context of releases to the biosphere from disposal facilities for solid radioactive waste. Since releases to the biosphere from disposal facilities involve transfers from the geosphere to the biosphere, an important aspect is the combined effects of surface hydrology, near-surface hydrogeology and chemical gradients on speciation and radionuclide mobility in the zone in which the geosphere and biosphere overlap (herein described as the geosphere-biosphere subsystem). In turn, these aspects of the environment can be modified as a result of environmental change over the thousands of years that have to be considered in radioactive waste disposal safety assessments. Building on the experience from improved understanding of the behavior of the key radionuclides, this paper proceeds to describe development of a generic methodology for representing the processes and environmental changes that are characteristic of the interface between the geosphere and the biosphere. The information that is provided and the methodology that is described are based on international collaborative work implemented through the BIOPROTA forum, www.bioprota.org. Copyright © 2013 Elsevier Ltd. All

A biosphere assessment of high-level radioactive waste disposal in Sweden.

Science.gov (United States)

Kautsky, Ulrik; Lindborg, Tobias; Valentin, Jack

2015-04-01

Licence applications to build a repository for the disposal of Swedish spent nuclear fuel have been lodged, underpinned by myriad reports and several broader reviews. This paper sketches out the technical and administrative aspects and highlights a recent review of the biosphere effects of a potential release from the repository. A comprehensive database and an understanding of major fluxes and pools of water and organic matter in the landscape let one envisage the future by looking at older parts of the site. Thus, today's biosphere is used as a natural analogue of possible future landscapes. It is concluded that the planned repository can meet the safety criteria and will have no detectable radiological impact on plants and animals. This paper also briefly describes biosphere work undertaken after the review. The multidisciplinary approach used is relevant in a much wider context and may prove beneficial across many environmental contexts. © The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

Terrestrial acidification during the end-Permian biosphere crisis?

NARCIS (Netherlands)

Sephton, Mark A.; Jiao, Dan; Engel, Michael H.; Looy, Cindy V.; Visscher, Henk

Excessive acid rainfall associated with emplacement of the Siberian Traps magmatic province is increasingly accepted as a major contributing factor to the end-Permian biosphere crisis. However, direct proxy evidence of terrestrial acidification is so far not available. In this paper, we seek to

Use of contaminated well water, example reference biospheres 1 and 2A

International Nuclear Information System (INIS)

Santucci, P.; Kontic, B.; Coughtrey, P.; McKenney, C.; Smith, G.

2005-01-01

The BIOMASS programme's Theme 1 evaluated a number of scenarios, which assisted in the development of practical guidance. A total of four Example Reference Biospheres were fully developed, with the assumptions, data, and models thoroughly documented. These Examples display both the practicality and the transparency available through the use of the Reference Biosphere Methodology. While the methodology is designed to promote transparency and traceability, proper documentation and justification is still the responsibility of the user. The Examples can also be used as generic analyses in some situations. Although it is anticipated that each of the Reference Biospheres explored within BIOMASS Theme 1 should be a useful practical example, the quantitative results of the model calculations are not intended to be understood as prescribed biosphere 'conversion factors'. In choosing to implement an Example, careful consideration would need to be given to their relevance (including associated data) to the particular assessment context at hand. In general, the more complex the model is, the more limited applicability it has for generic purposes. For example, ERB1A (direct use of well water for drinking) can be used straightforwardly, with minor or no adjustments, at a number of generic sites. Example 2A, however, for which climatic conditions and agricultural practices need to be specified, would need to be implemented for each specific situation

Review of geosphere-biosphere interface processes and their handling in the safety case of Posiva

International Nuclear Information System (INIS)

Lahdenperae, A.-M.

2006-12-01

The report describes list of databases of the Features, Events and Processes (FEPs) on the basis of the current knowledge and ranks them for their potential importance of radionuclide transport in the Safety Case. Due to vast amount of FEPs, only those assessed as potentially significant for the geosphere-biosphere interface zone (GBIZ) are described in detail. However, for scientific understanding also general main FEPs in the GBIZ are incorporated whether they affect directly radionuclide transport or not. The geosphere-biosphere interface zone, or the boundaries between the geosphere and biosphere modelling domains of the safety assessment, has been raised to an important issue but, according to the reports, it has so far taken into account rather poorly or not at all. Thus, it is acknowledged that a genuine site-specific treatment and incorporation of (deeper) overburden and aquifers into the biosphere models are needed to cover all relevant FEPs and to treat properly the zone in the modeling chain of groundwater flow and geosphere and biosphere transport of radionuclides. The principal variability in the GBIZ, especially in the biosphere, is driven by climatic change. The change from bedrock groundwater to bioavailable region takes place without gaps in the top bedrock to the overburden. However, it is important to recognise that there are regions in GBIZ that overlap the geosphere and biosphere model domains problems envisaged with the treatment of the GBIZ are associated with defining the boundary conditions for both far field and biosphere models. The GBIZ is not a separate modelling domain and the processes and events affecting the transport of radionuclides within the GBIZ should not be considered to be unidirectional. The biosphere is a diverse system under continuous development and impossible to model accurately. Thus, some inherent uncertainty already in the conceptual level of modelling has to be accepted. In addition of needs to handle spatial and

An improved land biosphere module for use in the DCESS Earth system model (version 1.1 with application to the last glacial termination

Directory of Open Access Journals (Sweden)

R. Eichinger

2017-09-01

Full Text Available Interactions between the land biosphere and the atmosphere play an important role for the Earth's carbon cycle and thus should be considered in studies of global carbon cycling and climate. Simple approaches are a useful first step in this direction but may not be applicable for certain climatic conditions. To improve the ability of the reduced-complexity Danish Center for Earth System Science (DCESS Earth system model DCESS to address cold climate conditions, we reformulated the model's land biosphere module by extending it to include three dynamically varying vegetation zones as well as a permafrost component. The vegetation zones are formulated by emulating the behaviour of a complex land biosphere model. We show that with the new module, the size and timing of carbon exchanges between atmosphere and land are represented more realistically in cooling and warming experiments. In particular, we use the new module to address carbon cycling and climate change across the last glacial transition. Within the constraints provided by various proxy data records, we tune the DCESS model to a Last Glacial Maximum state and then conduct transient sensitivity experiments across the transition under the application of explicit transition functions for high-latitude ocean exchange, atmospheric dust, and the land ice sheet extent. We compare simulated time evolutions of global mean temperature, pCO2, atmospheric and oceanic carbon isotopes as well as ocean dissolved oxygen concentrations with proxy data records. In this way we estimate the importance of different processes across the transition with emphasis on the role of land biosphere variations and show that carbon outgassing from permafrost and uptake of carbon by the land biosphere broadly compensate for each other during the temperature rise of the early last deglaciation.

An integrated algorithm for hypersonic fluid-thermal-structural numerical simulation

Science.gov (United States)

Li, Jia-Wei; Wang, Jiang-Feng

2018-05-01

In this paper, a fluid-structural-thermal integrated method is presented based on finite volume method. A unified integral equations system is developed as the control equations for physical process of aero-heating and structural heat transfer. The whole physical field is discretized by using an up-wind finite volume method. To demonstrate its capability, the numerical simulation of Mach 6.47 flow over stainless steel cylinder shows a good agreement with measured values, and this method dynamically simulates the objective physical processes. Thus, the integrated algorithm proves to be efficient and reliable.

Integrated Simulation for HVAC Performance Prediction: State-of-the-Art Illustration

NARCIS (Netherlands)

Hensen, J.L.M.; Clarke, J.A.

2000-01-01

This paper aims to outline the current state-of-the-art in integrated building simulation for performance prediction of heating, ventilating and air-conditioning (HVAC) systems. The ESP-r system is used as an example where integrated simulation is a core philosophy behind the development. The

Multiple greenhouse gas feedbacks from the land biosphere under future climate change scenarios

Science.gov (United States)

Stocker, Benjamin; Roth, Raphael; Joos, Fortunat; Spahni, Renato; Steinacher, Marco; Zaehle, Soenke; Bouwman, Lex; Xu-Ri, Xu-Ri; Prentice, Colin

2013-04-01

Atmospheric concentrations of the three important greenhouse gases (GHG) CO2, CH4, and N2O are mediated by processes in the terrestrial biosphere. The sensitivity of terrestrial GHG emissions to climate and CO2 contributed to the sharp rise in atmospheric GHG concentrations since preindustrial times and leads to multiple feedbacks between the terrestrial biosphere and the climate system. The strength of these feedbacks is determined by (i) the sensitivity of terrestrial GHG emissions to climate and CO2 and (ii) the greenhouse warming potential of the respective gas. Here, we quantify feedbacks from CO2, CH4, N2O, and land surface albedo in a consistent and comprehensive framework based on a large set of simulations conducted with an Earth System Model of Intermediate Complexity. The modeled sensitivities of CH4 and N2O emissions are tested, demonstrating that independent data for non-land (anthropogenic, oceanic, etc.) GHG emissions, combined with simulated emissions from natural and agricultural land reproduces historical atmospheric budgets within their uncertainties. 21st-century scenarios for climate, land use change and reactive nitrogen inputs (Nr) are applied to investigate future GHG emissions. Results suggest that in a business-as-usual scenario, terrestrial N2O emissions increase from 9.0 by today to 9.8-11.1 (RCP 2.6) and 14.2-17.0 TgN2O-N/yr by 2100 (RCP 8.5). Without anthropogenic Nr inputs, the amplification is reduced by 24-32%. Soil CH4 emissions increase from 221 at present to 228-245 in RCP 2.6 and to 303-343 TgCH4/yr in RCP 8.5, and the land becomes a net source of C by 2100 AD. Feedbacks from land imply an additional warming of 1.3-1.5°C by 2300 in RCP 8.5, 0.4-0.5°C of which are due to N2O and CH4. The combined effect of multiple GHGs and albedo represents an increasingly positive total feedback to anthropogenic climate change with positive individual feedbacks from CH4, N2O, and albedo outweighing the diminishing negative feedback from CO2

Radioactive iodine waste. 8. Biosphere assessment of I-129 released to deep marine seabed

International Nuclear Information System (INIS)

Miki, Takahito; Yoshida, Hideji; Ikeda, Takao

1999-01-01

Biosphere model for I-129 repository constructed under coastal seabed was developed in this study. The result showed that dose conversion factor for the repository was much less than that of biosphere model which was developed for the river discharge case. This was due to the much amount of dilution by seawater and limited exposure pathway.(author)

Real-time hybrid simulation using the convolution integral method

International Nuclear Information System (INIS)

Kim, Sung Jig; Christenson, Richard E; Wojtkiewicz, Steven F; Johnson, Erik A

2011-01-01

This paper proposes a real-time hybrid simulation method that will allow complex systems to be tested within the hybrid test framework by employing the convolution integral (CI) method. The proposed CI method is potentially transformative for real-time hybrid simulation. The CI method can allow real-time hybrid simulation to be conducted regardless of the size and complexity of the numerical model and for numerical stability to be ensured in the presence of high frequency responses in the simulation. This paper presents the general theory behind the proposed CI method and provides experimental verification of the proposed method by comparing the CI method to the current integration time-stepping (ITS) method. Real-time hybrid simulation is conducted in the Advanced Hazard Mitigation Laboratory at the University of Connecticut. A seismically excited two-story shear frame building with a magneto-rheological (MR) fluid damper is selected as the test structure to experimentally validate the proposed method. The building structure is numerically modeled and simulated, while the MR damper is physically tested. Real-time hybrid simulation using the proposed CI method is shown to provide accurate results

Parasitic infections of amphibians in the Pendjari Biosphere ...

African Journals Online (AJOL)

Parasitic infections of amphibians in the Pendjari Biosphere Reserve, Benin. ... Results obtained show the possible influence of land-use pattern on parasite distribution. For example, the ... Furthermore, this infection pattern may be indicative of an immunosuppressive effect of pesticides on the frogs of the Agricultural Zone.

High-density amorphous ice: A path-integral simulation

Science.gov (United States)

Herrero, Carlos P.; Ramírez, Rafael

2012-09-01

Structural and thermodynamic properties of high-density amorphous (HDA) ice have been studied by path-integral molecular dynamics simulations in the isothermal-isobaric ensemble. Interatomic interactions were modeled by using the effective q-TIP4P/F potential for flexible water. Quantum nuclear motion is found to affect several observable properties of the amorphous solid. At low temperature (T = 50 K) the molar volume of HDA ice is found to increase by 6%, and the intramolecular O-H distance rises by 1.4% due to quantum motion. Peaks in the radial distribution function of HDA ice are broadened with respect to their classical expectancy. The bulk modulus, B, is found to rise linearly with the pressure, with a slope ∂B/∂P = 7.1. Our results are compared with those derived earlier from classical and path-integral simulations of HDA ice. We discuss similarities and discrepancies with those earlier simulations.

Timing sensory integration for robot simulation of autistic behavior

NARCIS (Netherlands)

Barakova, E.I.; Chonnaparamutt, W.

2009-01-01

The experiments in this paper show that the impact of temporal aspects of sensory integration on the precision of movement is concordant with behavioral studies of sensory integrative dysfunction and autism. Specifically, the simulation predicts that distant grasping will be performed properly by

Design and Realization of Avionics Integration Simulation System Based on RTX

Directory of Open Access Journals (Sweden)

Wang Liang

2016-01-01

Full Text Available Aircraft avionics system becoming more and more complicated, it is too hard to test and verify real avionics systems. A design and realization method of avionics integration simulation system based on RTX was brought forward to resolve the problem. In this simulation system, computer software and hardware resources were utilized entirely. All kinds of aircraft avionics system HIL (hardware-in-loop simulations can be implemented in this platform. The simulation method provided the technical foundation of testing and verifying real avionics system. The research has recorded valuable data using the newly-developed method. The experiment results prove that the avionics integration simulation system was used well in some helicopter avionics HIL simulation experiment. The simulation experiment results provided the necessary judgment foundation for the helicopter real avionics system verification.

Microbial metagenomes from three aquifers in the Fennoscandian shield terrestrial deep biosphere reveal metabolic partitioning among populations.

Science.gov (United States)

Wu, Xiaofen; Holmfeldt, Karin; Hubalek, Valerie; Lundin, Daniel; Åström, Mats; Bertilsson, Stefan; Dopson, Mark

2016-05-01

Microorganisms in the terrestrial deep biosphere host up to 20% of the earth's biomass and are suggested to be sustained by the gases hydrogen and carbon dioxide. A metagenome analysis of three deep subsurface water types of contrasting age (from 86% coverage. The populations were dominated by Proteobacteria, Candidate divisions, unclassified archaea and unclassified bacteria. The estimated genome sizes of the biosphere. The data were finally used to create a combined metabolic model of the deep terrestrial biosphere microbial community.

Estimation of Pre-industrial Nitrous Oxide Emission from the Terrestrial Biosphere

Science.gov (United States)

Xu, R.; Tian, H.; Lu, C.; Zhang, B.; Pan, S.; Yang, J.

2015-12-01

Nitrous oxide (N2O) is currently the third most important greenhouse gases (GHG) after methane (CH4) and carbon dioxide (CO2). Global N2O emission increased substantially primarily due to reactive nitrogen (N) enrichment through fossil fuel combustion, fertilizer production, and legume crop cultivation etc. In order to understand how climate system is perturbed by anthropogenic N2O emissions from the terrestrial biosphere, it is necessary to better estimate the pre-industrial N2O emissions. Previous estimations of natural N2O emissions from the terrestrial biosphere range from 3.3-9.0 Tg N2O-N yr-1. This large uncertainty in the estimation of pre-industrial N2O emissions from the terrestrial biosphere may be caused by uncertainty associated with key parameters such as maximum nitrification and denitrification rates, half-saturation coefficients of soil ammonium and nitrate, N fixation rate, and maximum N uptake rate. In addition to the large estimation range, previous studies did not provide an estimate on preindustrial N2O emissions at regional and biome levels. In this study, we applied a process-based coupled biogeochemical model to estimate the magnitude and spatial patterns of pre-industrial N2O fluxes at biome and continental scales as driven by multiple input data, including pre-industrial climate data, atmospheric CO2 concentration, N deposition, N fixation, and land cover types and distributions. Uncertainty associated with key parameters is also evaluated. Finally, we generate sector-based estimates of pre-industrial N2O emission, which provides a reference for assessing the climate forcing of anthropogenic N2O emission from the land biosphere.

Space-Charge Simulation of Integrable Rapid Cycling Synchrotron

Energy Technology Data Exchange (ETDEWEB)

Eldred, Jeffery [Fermilab; Valishev, Alexander [Fermilab

2017-05-01

Integrable optics is an innovation in particle accelerator design that enables strong nonlinear focusing without generating parametric resonances. We use a Synergia space-charge simulation to investigate the application of integrable optics to a high-intensity hadron ring that could replace the Fermilab Booster. We find that incorporating integrability into the design suppresses the beam halo generated by a mismatched KV beam. Our integrable rapid cycling synchrotron (iRCS) design includes other features of modern ring design such as low momentum compaction factor and harmonically canceling sextupoles. Experimental tests of high-intensity beams in integrable lattices will take place over the next several years at the Fermilab Integrable Optics Test Accelerator (IOTA) and the University of Maryland Electron Ring (UMER).

NACP Site: Terrestrial Biosphere Model Output Data in Original Format

Data.gov (United States)

National Aeronautics and Space Administration — ABSTRACT: This data set contains the original model output data submissions from the 24 terrestrial biosphere models (TBM) that participated in the North American...

NACP Site: Terrestrial Biosphere Model Output Data in Original Format

Data.gov (United States)

National Aeronautics and Space Administration — This data set contains the original model output data submissions from the 24 terrestrial biosphere models (TBM) that participated in the North American Carbon...

Methane Production and Transport within the Marsh Biome of Biosphere 2

Science.gov (United States)

Molnar, Jennifer; Goodridge, Kelven

1997-01-01

In recent decades, the concentration of methane in the earth's atmosphere increased 1-2% annually. It's rate of increases, combined with methane's effectiveness as a greenhouse gas, has led to an intensive research effort to determine the sources and sinks of the gas in the environment. Biosphere 2 offers a unique opportunity to contribute to the effort because it lacks a major photochemical sink present in the Earth's atmosphere. Researchers can therefore concentrate on biological processes involved in methane cycles. Wetlands are a large source of atmospheric methane, due to anoxic conditions in the sediments and the abundance of organic materials. In order to determine if these conditions in Biosphere 2 also promote methane production, this study looked for the fluxes of methane and methods of transport of the gas from from the water and sediments to the atmosphere in the Marsh Biome. Fluxes of methane from the sediments and waters were measured using static chambers, peepers, and leaf bags. Fluxes and vertical profiles of methane in the sediments show that substantial amounts of methane are being produced in the marsh and are being transported into the Biosphere 2 environment.

Total and Direct Correlation Function Integrals from Molecular Simulation of Binary Systems

DEFF Research Database (Denmark)

Wedberg, Nils Hejle Rasmus Ingemar; O’Connell, John P.; Peters, Günther H.J.

2011-01-01

The possibility for obtaining derivative properties for mixtures from integrals of spatial total and direct correlation functions obtained from molecular dynamics simulations is explored. Theoretically well-supported methods are examined to extend simulation radial distribution functions to long...... are consistent with an excess Helmholtz energy model fitted to available simulations. In addition, simulations of water/methanol and water/t-butanol mixtures have been carried out. The method yields results for partial molar volumes, activity coefficient derivatives, and individual correlation function integrals...... in reasonable agreement with smoothed experimental data. The proposed method for obtaining correlation function integrals is shown to perform at least as well as or better than two previously published approaches....

Integration of MATLAB Simulink(Registered Trademark) Models with the Vertical Motion Simulator

Science.gov (United States)

Lewis, Emily K.; Vuong, Nghia D.

2012-01-01

This paper describes the integration of MATLAB Simulink(Registered TradeMark) models into the Vertical Motion Simulator (VMS) at NASA Ames Research Center. The VMS is a high-fidelity, large motion flight simulator that is capable of simulating a variety of aerospace vehicles. Integrating MATLAB Simulink models into the VMS needed to retain the development flexibility of the MATLAB environment and allow rapid deployment of model changes. The process developed at the VMS was used successfully in a number of recent simulation experiments. This accomplishment demonstrated that the model integrity was preserved, while working within the hard real-time run environment of the VMS architecture, and maintaining the unique flexibility of the VMS to meet diverse research requirements.

Pharmaceutical Residues Affecting the UNESCO Biosphere Reserve Kristianstads Vattenrike Wetlands

DEFF Research Database (Denmark)

Björklund, Erland; Svahn, Ola; Bak, Søren Alex

2016-01-01

This study is the first to investigate the pharmaceutical burden from point sources affecting the UNESCO Biosphere Reserve Kristianstads Vattenrike, Sweden. The investigated Biosphere Reserve is a >1000 km(2) wetland system with inflows from lakes, rivers, leachate from landfill, and wastewater......-treatment plants (WWTPs). We analysed influent and treated wastewater, leachate water, lake, river, and wetland water alongside sediment for six model pharmaceuticals. The two WWTPs investigated released pharmaceutical residues at levels close to those previously observed in Swedish monitoring exercises. Compound......-dependent WWTP removal efficiencies ranging from 12 to 100 % for bendroflumethiazide, oxazepam, atenolol, carbamazepine, and diclofenac were observed. Surface-water concentrations in the most affected lake were ≥100 ng/L for the various pharmaceuticals with atenolol showing the highest levels (>300 ng...

Terrestrial biosphere carbon storage under alternative climate projections

Energy Technology Data Exchange (ETDEWEB)

Schaphoff, S.; Lucht, W.; Gerten, D.; Sitch, S.; Cramer, W. [Potsdam Institute for Climate Impact Research, P.O. Box 601203, D-14412 Potsdam (Germany); Prentice, I.C. [QUEST, Department of Earth Sciences, University of Bristol, Wills Memorial Building, Bristol, BS8 1RJ (United Kingdom)

2006-01-15

This study investigates commonalities and differences in projected land biosphere carbon storage among climate change projections derived from one emission scenario by five different general circulation models (GCMs). Carbon storage is studied using a global biogeochemical process model of vegetation and soil that includes dynamic treatment of changes in vegetation composition, a recently enhanced version of the Lund-Potsdam-Jena Dynamic Global Vegetation Model (LPJ-DGVM). Uncertainty in future terrestrial carbon storage due to differences in the climate projections is large. Changes by the end of the century range from -106 to +201 PgC, thus, even the sign of the response whether source or sink, is uncertain. Three out of five climate projections produce a land carbon source by the year 2100, one is approximately neutral and one a sink. A regional breakdown shows some robust qualitative features. Large areas of the boreal forest are shown as a future CO2 source, while a sink appears in the arctic. The sign of the response in tropical and sub-tropical ecosystems differs among models, due to the large variations in simulated precipitation patterns. The largest uncertainty is in the response of tropical rainforests of South America and Central Africa.

Terrestrial biosphere carbon storage under alternative climate projections

International Nuclear Information System (INIS)

Schaphoff, S.; Lucht, W.; Gerten, D.; Sitch, S.; Cramer, W.; Prentice, I.C.

2006-01-01

This study investigates commonalities and differences in projected land biosphere carbon storage among climate change projections derived from one emission scenario by five different general circulation models (GCMs). Carbon storage is studied using a global biogeochemical process model of vegetation and soil that includes dynamic treatment of changes in vegetation composition, a recently enhanced version of the Lund-Potsdam-Jena Dynamic Global Vegetation Model (LPJ-DGVM). Uncertainty in future terrestrial carbon storage due to differences in the climate projections is large. Changes by the end of the century range from -106 to +201 PgC, thus, even the sign of the response whether source or sink, is uncertain. Three out of five climate projections produce a land carbon source by the year 2100, one is approximately neutral and one a sink. A regional breakdown shows some robust qualitative features. Large areas of the boreal forest are shown as a future CO2 source, while a sink appears in the arctic. The sign of the response in tropical and sub-tropical ecosystems differs among models, due to the large variations in simulated precipitation patterns. The largest uncertainty is in the response of tropical rainforests of South America and Central Africa

JULES-crop: a parametrisation of crops in the Joint UK Land Environment Simulator

Science.gov (United States)

Osborne, T.; Gornall, J.; Hooker, J.; Williams, K.; Wiltshire, A.; Betts, R.; Wheeler, T.

2014-10-01

Studies of climate change impacts on the terrestrial biosphere have been completed without recognition of the integrated nature of the biosphere. Improved assessment of the impacts of climate change on food and water security requires the development and use of models not only representing each component but also their interactions. To meet this requirement the Joint UK Land Environment Simulator (JULES) land surface model has been modified to include a generic parametrisation of annual crops. The new model, JULES-crop, is described and evaluation at global and site levels for the four globally important crops; wheat, soy bean, maize and rice is presented. JULES-crop demonstrates skill in simulating the inter-annual variations of yield for maize and soy bean at the global level, and for wheat for major spring wheat producing countries. The impact of the new parametrisation, compared to the standard configuration, on the simulation of surface heat fluxes is largely an alteration of the partitioning between latent and sensible heat fluxes during the later part of the growing season. Further evaluation at the site level shows the model captures the seasonality of leaf area index and canopy height better than in standard JULES. However, this does not lead to an improvement in the simulation of sensible and latent heat fluxes. The performance of JULES-crop from both an earth system and crop yield model perspective is encouraging however, more effort is needed to develop the parameterisation of the model for specific applications. Key future model developments identified include the specification of the yield gap to enable better representation of the spatial variability in yield.

SeaWiFS Third Anniversary Global Biosphere

Science.gov (United States)

2002-01-01

September 18,2000 is the third anniversary of the start of regular SeaWiFS operations of this remarkable planet called Earth. This SeaWiFS image is of the Global Biosphere depicting the ocean's long-term average phytoplankton chlorophyll concentration acquired between September 1997 and August 2000 combined with the SeaWiFS-derived Normalized Difference Vegetation Index (NDVI) over land during July 2000.

BIM-Integrated Construction Operation Simulation for Just-In-Time Production Management

Directory of Open Access Journals (Sweden)

WoonSeong Jeong

2016-10-01

Full Text Available Traditional construction planning, which depends on historical data and heuristic modification, prevents the integration of managerial details such as productivity dynamics. Specifically, the distance between planning and execution brings cost overruns and duration extensions. To minimize variations, this research presents a Building Information Modeling (BIM-integrated simulation framework for predicting productivity dynamics at the construction planning phase. To develop this framework, we examined critical factors affecting productivity at the operational level, and then forecast the productivity dynamics. The resulting plan includes specific commands for retrieving the required information from BIM and executing operation simulations. It consists of the following steps: (1 preparing a BIM model to produce input data; (2 composing a construction simulation at the operational level; and (3 obtaining productivity dynamics from the BIM-integrated simulation. To validate our framework, we applied it to a structural steel model; this was due to the significance of steel erections. By integrating BIM with construction operation simulations, we were able to create reliable construction plans that adapted to project changes. Our results show that the developed framework facilitates the reliable prediction of productivity dynamics, and can contribute to improved schedule reliability, optimized resource allocation, cost savings associated with buffers, and reduced material waste.

Development of ACBIO: A Biosphere Template Using AMBER for a Potential Radioactive Waste Repository

International Nuclear Information System (INIS)

Lee, Youn Myoung; Hwang, Yong Soo; Kang, Chul Hyung; Hahn, Pil Soo

2005-01-01

Nuclides in radioactive wastes are assumed to be transported in the geosphere by groundwater and probably discharged into the biosphere. Quantitative evaluation of doses to human beings due to nuclide transport in the geosphere and through the various pathways in the biosphere is the final step of safety assessment of the radioactive waste repository. To calculate the flux to dose conversion factors (DCFs) for nuclides appearing at GBIs with their decay chains, a template ACBIO which is an AMBER case file based on mathematical model for the mass transfer coefficients between the compartments has been developed considering material balance among the compartments in biosphere and then implementing to AMBER, a general and flexible software tool that allows to build dynamic compartment models. An illustrative calculation with ACBIO is shown.

An Integrated Simulation Tool for Modeling the Human Circulatory System

Science.gov (United States)

Asami, Ken'ichi; Kitamura, Tadashi

This paper presents an integrated simulation of the circulatory system in physiological movement. The large circulatory system model includes principal organs and functional units in modules in which comprehensive physiological changes such as nerve reflexes, temperature regulation, acid/base balance, O2/CO2 balance, and exercise are simulated. A beat-by-beat heart model, in which the corresponding electrical circuit problems are solved by a numerical analytic method, enables calculation of pulsatile blood flow to the major organs. The integration of different perspectives on physiological changes makes this simulation model applicable for the microscopic evaluation of blood flow under various conditions in the human body.

Integrated orbit and attitude hardware-in-the-loop simulations for autonomous satellite formation flying

Science.gov (United States)

Park, Han-Earl; Park, Sang-Young; Kim, Sung-Woo; Park, Chandeok

2013-12-01

Development and experiment of an integrated orbit and attitude hardware-in-the-loop (HIL) simulator for autonomous satellite formation flying are presented. The integrated simulator system consists of an orbit HIL simulator for orbit determination and control, and an attitude HIL simulator for attitude determination and control. The integrated simulator involves four processes (orbit determination, orbit control, attitude determination, and attitude control), which interact with each other in the same way as actual flight processes do. Orbit determination is conducted by a relative navigation algorithm using double-difference GPS measurements based on the extended Kalman filter (EKF). Orbit control is performed by a state-dependent Riccati equation (SDRE) technique that is utilized as a nonlinear controller for the formation control problem. Attitude is determined from an attitude heading reference system (AHRS) sensor, and a proportional-derivative (PD) feedback controller is used to control the attitude HIL simulator using three momentum wheel assemblies. Integrated orbit and attitude simulations are performed for a formation reconfiguration scenario. By performing the four processes adequately, the desired formation reconfiguration from a baseline of 500-1000 m was achieved with meter-level position error and millimeter-level relative position navigation. This HIL simulation demonstrates the performance of the integrated HIL simulator and the feasibility of the applied algorithms in a real-time environment. Furthermore, the integrated HIL simulator system developed in the current study can be used as a ground-based testing environment to reproduce possible actual satellite formation operations.

1.3 Radioactivity in the biosphere

International Nuclear Information System (INIS)

1985-01-01

The term biosphere is defined comprising specific properties of the live envelope of the Earth. The classification of its sources is discussed. The concepts of ecology and ecosystem are defined and the differences are characterized between the aquatic and terrestrial ecosystems. Radiation ecology studies the interaction of radioactive materials and of radiation with the environment. Ecologically important radionuclides are listed with their ecological importance and the highest permissible concentrations in the air and water. Radionuclides are classified by their relative toxicity. (J.C.)

Radiological risk assessment and biosphere modelling for radioactive waste disposal in Switzerland.

Science.gov (United States)

Brennwald, M S; van Dorp, F

2009-12-01

Long-term safety assessments for geological disposal of radioactive waste in Switzerland involve the demonstration that the annual radiation dose to humans due to the potential release of radionuclides from the waste repository into the biosphere will not exceed the regulatory limit of 0.1 mSv. Here, we describe the simple but robust approach used by Nagra (Swiss National Cooperative for the Disposal of Radioactive Waste) to quantify the dose to humans as a result to time-dependent release of radionuclides from the geosphere into the biosphere. The model calculates the concentrations of radionuclides in different terrestrial and aquatic compartments of the surface environment. The fluxes of water and solids within the environment are the drivers for the exchange of radionuclides between these compartments. The calculated radionuclide concentrations in the biosphere are then used to estimate the radiation doses to humans due to various exposure paths (e.g. ingestion of radionuclides via drinking water and food, inhalation of radionuclides, external irradiation from radionuclides in soils). In this paper we also discuss recent new achievements and planned future work.

Application of the Spanish methodological approach for biosphere assessment to a generic high-level waste disposal site

International Nuclear Information System (INIS)

Agueero, A.; Pinedo, P.; Simon, I.; Cancio, D.; Moraleda, M.; Trueba, C.; Perez-Sanchez, D.

2008-01-01

A methodological approach which includes conceptual developments, methodological aspects and software tools have been developed in the Spanish context, based on the BIOMASS 'Reference Biospheres Methodology'. The biosphere assessments have to be undertaken with the aim of demonstrating compliance with principles and regulations established to limit the possible radiological impact of radioactive waste disposals on human health and on the environment, and to ensure that future generations will not be exposed to higher radiation levels than those that would be acceptable today. The biosphere in the context of high-level waste disposal is defined as the collection of various radionuclide transfer pathways that may result in releases into the surface environment, transport within and between the biosphere receptors, exposure of humans and biota, and the doses/risks associated with such exposures. The assessments need to take into account the complexity of the biosphere, the nature of the radionuclides released and the long timescales considered. It is also necessary to make assumptions related to the habits and lifestyle of the exposed population, human activities in the long term and possible modifications of the biosphere. A summary on the Spanish methodological approach for biosphere assessment are presented here as well as its application in a Spanish generic case study. A reference scenario has been developed based on current conditions at a site located in Central-West Spain, to indicate the potential impact to the actual population. In addition, environmental change has been considered qualitatively through the use of interaction matrices and transition diagrams. Unit source terms of 36 Cl, 79 Se, 99 Tc, 129 I, 135 Cs, 226 Ra, 231 Pa, 238 U, 237 Np and 239 Pu have been taken. Two exposure groups of infants and adults have been chosen for dose calculations. Results are presented and their robustness is evaluated through the use of uncertainty and sensitivity

Application of the Spanish methodological approach for biosphere assessment to a generic high-level waste disposal site.

Science.gov (United States)

Agüero, A; Pinedo, P; Simón, I; Cancio, D; Moraleda, M; Trueba, C; Pérez-Sánchez, D

2008-09-15

A methodological approach which includes conceptual developments, methodological aspects and software tools have been developed in the Spanish context, based on the BIOMASS "Reference Biospheres Methodology". The biosphere assessments have to be undertaken with the aim of demonstrating compliance with principles and regulations established to limit the possible radiological impact of radioactive waste disposals on human health and on the environment, and to ensure that future generations will not be exposed to higher radiation levels than those that would be acceptable today. The biosphere in the context of high-level waste disposal is defined as the collection of various radionuclide transfer pathways that may result in releases into the surface environment, transport within and between the biosphere receptors, exposure of humans and biota, and the doses/risks associated with such exposures. The assessments need to take into account the complexity of the biosphere, the nature of the radionuclides released and the long timescales considered. It is also necessary to make assumptions related to the habits and lifestyle of the exposed population, human activities in the long term and possible modifications of the biosphere. A summary on the Spanish methodological approach for biosphere assessment are presented here as well as its application in a Spanish generic case study. A reference scenario has been developed based on current conditions at a site located in Central-West Spain, to indicate the potential impact to the actual population. In addition, environmental change has been considered qualitatively through the use of interaction matrices and transition diagrams. Unit source terms of (36)Cl, (79)Se, (99)Tc, (129)I, (135)Cs, (226)Ra, (231)Pa, (238)U, (237)Np and (239)Pu have been taken. Two exposure groups of infants and adults have been chosen for dose calculations. Results are presented and their robustness is evaluated through the use of uncertainty and

Integration of a driving simulator and a traffic simulator case study: Exploring drivers' behavior in response to variable message signs

Directory of Open Access Journals (Sweden)

Mansoureh Jeihani

2017-12-01

Full Text Available For the first time, a driving simulator has been integrated with a traffic simulator at the network level to allow subjects to drive in a fairly realistic environment with a realistic traffic flow and density. A 10 mi2 (25 km2 network was developed in a driving simulator and then exported to a traffic simulator. About 30 subjects drove the simulator under different traffic and driving conditions and variable message sign (VMS information, both with and without integration. Route guidance was available for the subjects. The challenges of the integration process are explained and its advantages investigated. The study concluded that traffic density, VMS reliability and compliance behavior are higher when driving and traffic simulators are integrated. To find factors affecting route diversion, researchers applied a binary logistic regression model. The results indicated that the original chosen route, displayed VMS information, subjects' attitude toward VMS information helpfulness, and their level of exposure to VMS affect route diversion. In addition, a multinomial logistic regression model was employed to investigate important factors in route choice. The results revealed that there is a significant correlation with driver route choice behavior and their actual travel time, the need for GPS, VMS exposure and also the designed scenarios. It should be noted that the paper was peer-reviewed by TRB and presented at the TRB Annual Meeting, Washington, D.C., January 2016. Keywords: Integration, Variable message sign, Compliance behavior, Driving simulator, Traffic simulator, Discrete choice analysis

Response of the rare biosphere to environmental stressors in a highly diverse ecosystem (Zodletone spring, OK, USA).

Science.gov (United States)

Coveley, Suzanne; Elshahed, Mostafa S; Youssef, Noha H

2015-01-01

Within highly diverse ecosystems, the majority of bacterial taxa are present in low abundance as members of the rare biosphere. The rationale for the occurrence and maintenance of the rare biosphere, and the putative ecological role(s) and dynamics of its members within a specific ecosystem is currently debated. We hypothesized that in highly diverse ecosystems, a fraction of the rare biosphere acts as a backup system that readily responds to environmental disturbances. We tested this hypothesis by subjecting sediments from Zodletone spring, a sulfide- and sulfur-rich spring in Southwestern OK, to incremental levels of salinity (1, 2, 3, 4, and 10% NaCl), or temperature (28°, 30°, 32°, and 70 °C), and traced the trajectories of rare members of the community in response to these manipulations using 16S rRNA gene analysis. Our results indicate that multiple rare bacterial taxa are promoted from rare to abundant members of the community following such manipulations and that, in general, the magnitude of such recruitment is directly proportional to the severity of the applied manipulation. Rare members that are phylogenetically distinct from abundant taxa in the original sample (unique rare biosphere) played a more important role in the microbial community response to environmental disturbances, compared to rare members that are phylogenetically similar to abundant taxa in the original sample (non-unique rare biosphere). The results emphasize the dynamic nature of the rare biosphere, and highlight its complexity and non-monolithic nature.

An extensive phase space for the potential martian biosphere.

Science.gov (United States)

Jones, Eriita G; Lineweaver, Charles H; Clarke, Jonathan D

2011-12-01

We present a comprehensive model of martian pressure-temperature (P-T) phase space and compare it with that of Earth. Martian P-T conditions compatible with liquid water extend to a depth of ∼310 km. We use our phase space model of Mars and of terrestrial life to estimate the depths and extent of the water on Mars that is habitable for terrestrial life. We find an extensive overlap between inhabited terrestrial phase space and martian phase space. The lower martian surface temperatures and shallower martian geotherm suggest that, if there is a hot deep biosphere on Mars, it could extend 7 times deeper than the ∼5 km depth of the hot deep terrestrial biosphere in the crust inhabited by hyperthermophilic chemolithotrophs. This corresponds to ∼3.2% of the volume of present-day Mars being potentially habitable for terrestrial-like life.

Integral simulation of the creation and expansion of a transonic argon plasma

International Nuclear Information System (INIS)

Peerenboom, K S C; Goedheer, W J; Van Dijk, J; Van der Mullen, J J A M

2010-01-01

A transonic argon plasma is studied in an integral simulation where both the plasma creation and expansion are incorporated in the same model. This integral approach allows for simulation of expanding plasmas where the Mach number is not known a priori. Results of this integral simulation are validated with semi-analytical models. Inside the creation region the results for the electron temperature, the heavy particle temperature and the electron density are compared with a global model of the creation region. In the expansion region, the simulation results of the compressible flow field are compared with predictions for the shock position. Both the results inside the creation region as well as in the expansion region are in good agreement with the semi-analytical models.

Environmental values in post-socialist Hungary : Is it useful to distinguish egoistic, altruistic and biospheric values?

NARCIS (Netherlands)

de Groot, Judith. I. M.; Steg, Linda; Keizer, Martijn; Farsang, Andrea; Watt, Alan

2012-01-01

In this article the authors examine whether the significance of biospheric values as a separate cluster next to egoistic and altruistic values is mainly a Western European phenomenon or whether biospheric values are also endorsed as a value in its own right in post-socialist Hungary. In two

The deep, hot biosphere: Twenty-five years of retrospection.

Science.gov (United States)

Colman, Daniel R; Poudel, Saroj; Stamps, Blake W; Boyd, Eric S; Spear, John R

2017-07-03

Twenty-five years ago this month, Thomas Gold published a seminal manuscript suggesting the presence of a "deep, hot biosphere" in the Earth's crust. Since this publication, a considerable amount of attention has been given to the study of deep biospheres, their role in geochemical cycles, and their potential to inform on the origin of life and its potential outside of Earth. Overwhelming evidence now supports the presence of a deep biosphere ubiquitously distributed on Earth in both terrestrial and marine settings. Furthermore, it has become apparent that much of this life is dependent on lithogenically sourced high-energy compounds to sustain productivity. A vast diversity of uncultivated microorganisms has been detected in subsurface environments, and we show that H 2 , CH 4 , and CO feature prominently in many of their predicted metabolisms. Despite 25 years of intense study, key questions remain on life in the deep subsurface, including whether it is endemic and the extent of its involvement in the anaerobic formation and degradation of hydrocarbons. Emergent data from cultivation and next-generation sequencing approaches continue to provide promising new hints to answer these questions. As Gold suggested, and as has become increasingly evident, to better understand the subsurface is critical to further understanding the Earth, life, the evolution of life, and the potential for life elsewhere. To this end, we suggest the need to develop a robust network of interdisciplinary scientists and accessible field sites for long-term monitoring of the Earth's subsurface in the form of a deep subsurface microbiome initiative.

Technical Review of the Laboratory Biosphere Closed Ecological System Facility

Science.gov (United States)

Dempster, W.; van Thillo, M.; Alling, A.; Allen, J.; Silverstone, S.; Nelson, M.

The "Laboratory Biosphere", a new closed ecological system facility in Santa Fe, New Mexico (USA) has been constructed and became operational in May 2002. Built and operated by the Global Ecotechnics consortium (Biosphere Technologies and Biosphere Foundation with Biospheric Design Inc., and the Institute of Ecotechnics), the research apparatus for intensive crop growth, biogeochemical cycle dynamics and recycling of inedible crop biomass comprises a sealed cylindrical steel chamber and attached variable volume chamber (lung) to prevent pressures caused by the expansion and contraction of the contained air. The cylindrical growing chamber is 3.7m (12 feet) long and 3.7m (12 foot) diameter, giving an internal volume of 34 m3 (1200 ft 3 ). The two crop growth beds cover 5.5 m2, with a soil depth of 0.3m (12 inches), with 12 x 1000 watt high-pressure sodium lights capable of variable lighting of 40-70 mol per m2 per day. A small soil bed reactor in the chamber can be activated to help with metabolism of chamber trace gases. The volume of the attached variable volume chamber (lung) can range between 0-11 m3 (0-400 ft 3 ). Evapotranspired and soil leachate water are collected, combined and recycled to water the planting beds. Sampling ports enable testing of water quality of leachate, condensate and irrigation water. Visual inspection windows provide views of the entire interior and growing beds. The chamber is also outfitted with an airlock to minimize air exchange when people enter and work in the chamber. Continuous sensors include atmospheric CO2 and oxygen, temperature, humidity, soil moisture, light level and water levels in reservoirs. Both "sniffer" (air ports) and "sipper" (water ports) will enable collection of water or air samples for detailed analysis. This paper reports on the development of this new soil-based bioregenerative life support closed system apparatus and its technical challenges and capabilities.

Marine biosphere reserves - Need of the 21st century

Digital Repository Service at National Institute of Oceanography (India)

Dhargalkar, V.K.; Untawale, A.G.

been declared in India and a few more are under consideration. The present article gives in brief the status of Marine Biosphere Reserves in India and a few other potential areas for the same reason, along the Indian coast. An action plan has been...

Overview of the development of a biosphere modelling capability for UK DoE (HMIP)

International Nuclear Information System (INIS)

Nancarrow, D.J.; Ashton, J.; Little, R.H.

1990-01-01

A programme of research has been funded, since 1982, by the United Kingdom Department of the Environment (Her Majesty's Inspectorate of Pollution, HMIP), to develop a procedure for post-closure radiological assessment of underground disposal facilities for low and intermediate level radioactive wastes. It is conventional to regard the disposal system as comprising the engineered barriers of the repository, the geological setting which provides natural barriers to migration, and the surface environment or biosphere. The requirement of a biosphere submodel, therefore, is to provide estimates, for given radionuclide inputs, of the dose or probability distribution function of dose to a maximally exposed individual as a function of time. This paper describes the development of the capability for biosphere modelling for HMIP in the context of the development of other assessment procedures. 11 refs., 3 figs., 2 tabs

In-situ detection of microbial life in the deep biosphere in igneous ocean crust

Directory of Open Access Journals (Sweden)

Everett Cosio Salas

2015-11-01

Full Text Available The deep biosphere is a major frontier to science. Recent studies have shown the presence and activity of cells in deep marine sediments and in the continental deep biosphere. Volcanic lavas in the deep ocean subsurface, through which substantial fluid flow occurs, present another potentially massive deep biosphere. We present results from the deployment of a novel in-situ logging tool designed to detect microbial life harbored in a deep, native, borehole environment within igneous oceanic crust, using deep ultraviolet native fluorescence spectroscopy. Results demonstrate the predominance of microbial-like signatures within the borehole environment, with densities in the range of 105 cells/mL. Based on transport and flux models, we estimate that such a concentration of microbial cells could not be supported by transport through the crust, suggesting in situ growth of these communities.

In situ Detection of Microbial Life in the Deep Biosphere in Igneous Ocean Crust.

Science.gov (United States)

Salas, Everett C; Bhartia, Rohit; Anderson, Louise; Hug, William F; Reid, Ray D; Iturrino, Gerardo; Edwards, Katrina J

2015-01-01

The deep biosphere is a major frontier to science. Recent studies have shown the presence and activity of cells in deep marine sediments and in the continental deep biosphere. Volcanic lavas in the deep ocean subsurface, through which substantial fluid flow occurs, present another potentially massive deep biosphere. We present results from the deployment of a novel in situ logging tool designed to detect microbial life harbored in a deep, native, borehole environment within igneous oceanic crust, using deep ultraviolet native fluorescence spectroscopy. Results demonstrate the predominance of microbial-like signatures within the borehole environment, with densities in the range of 10(5) cells/mL. Based on transport and flux models, we estimate that such a concentration of microbial cells could not be supported by transport through the crust, suggesting in situ growth of these communities.

Virtual Collaborative Simulation Environment for Integrated Product and Process Development

Science.gov (United States)

Gulli, Michael A.

1997-01-01

Deneb Robotics is a leader in the development of commercially available, leading edge three- dimensional simulation software tools for virtual prototyping,, simulation-based design, manufacturing process simulation, and factory floor simulation and training applications. Deneb has developed and commercially released a preliminary Virtual Collaborative Engineering (VCE) capability for Integrated Product and Process Development (IPPD). This capability allows distributed, real-time visualization and evaluation of design concepts, manufacturing processes, and total factory and enterprises in one seamless simulation environment.

Integrated model of Korean spent fuel and high level waste disposal options - 16091

International Nuclear Information System (INIS)

Hwang, Yongsoo; Miller, Ian

2009-01-01

This paper describes an integrated model developed by the Korean Atomic Energy Research Institute (KAERI) to simulate options for disposal of spent nuclear fuel (SNF) and reprocessing products in South Korea. A companion paper (Hwang and Miller, 2009) describes a systems-level model of Korean options for spent nuclear fuel (SNF) management in the 21. century. The model addresses alternative design concepts for disposal of SNF of different types (Candu, PWR), high level waste, and fission products arising from a variety of alternative fuel cycle back ends. It uses the GoldSim software to simulate the engineered system, near-field and far-field geosphere, and biosphere, resulting in long-term dose predictions for a variety of receptor groups. The model's results allow direct comparison of alternative repository design concepts, and identification of key parameter uncertainties and contributors to receptor doses. (authors)

Frozen soil parameterization in a distributed biosphere hydrological model

Directory of Open Access Journals (Sweden)

L. Wang

2010-03-01

Full Text Available In this study, a frozen soil parameterization has been modified and incorporated into a distributed biosphere hydrological model (WEB-DHM. The WEB-DHM with the frozen scheme was then rigorously evaluated in a small cold area, the Binngou watershed, against the in-situ observations from the WATER (Watershed Allied Telemetry Experimental Research. First, by using the original WEB-DHM without the frozen scheme, the land surface parameters and two van Genuchten parameters were optimized using the observed surface radiation fluxes and the soil moistures at upper layers (5, 10 and 20 cm depths at the DY station in July. Second, by using the WEB-DHM with the frozen scheme, two frozen soil parameters were calibrated using the observed soil temperature at 5 cm depth at the DY station from 21 November 2007 to 20 April 2008; while the other soil hydraulic parameters were optimized by the calibration of the discharges at the basin outlet in July and August that covers the annual largest flood peak in 2008. With these calibrated parameters, the WEB-DHM with the frozen scheme was then used for a yearlong validation from 21 November 2007 to 20 November 2008. Results showed that the WEB-DHM with the frozen scheme has given much better performance than the WEB-DHM without the frozen scheme, in the simulations of soil moisture profile at the cold regions catchment and the discharges at the basin outlet in the yearlong simulation.

Development of a reference biospheres methodology for radioactive waste disposal. Final report

Energy Technology Data Exchange (ETDEWEB)

Dorp, F van [NAGRA (Switzerland); and others

1996-09-01

The BIOMOVS II Working Group on Reference Biospheres has focused on the definition and testing of a methodology for developing models to analyse radionuclide behaviour in the biosphere and associated radiological exposure pathways(a Reference Biospheres Methodology). The Working Group limited the scope to the assessment of the long-term implications of solid radioactive waste disposal. Nevertheless, it is considered that many of the basic principles would be equally applicable to other areas of biosphere assessment. The recommended methodology has been chosen to be relevant to different types of radioactive waste and disposal concepts. It includes the justification, arguments and documentation for all the steps in the recommended methodology. The previous experience of members of the Reference Biospheres Working Group was that the underlying premises of a biosphere assessment have often been taken for granted at the early stages of model development, and can therefore fail to be recognized later on when questions of model sufficiency arise, for example, because of changing regulatory requirements. The intention has been to define a generic approach for the formation of an 'audit trail' and hence provide demonstration that a biosphere model is fit for its intended purpose. The starting point for the methodology has three. The Assessment Context sets out what the assessment has to achieve, eg. in terms of assessment purpose and related regulatory criteria, as well as information about the repository system and types of release from the geosphere. The Basic System Description includes the fundamental premises about future climate conditions and human behaviour which, to a significant degree, are beyond prediction. The International FEP List is a generically relevant list of Features, Events and Processes potentially important for biosphere model development. The International FEP List includes FEPs to do with the assessment context. The context examined in detail by

Development of a reference biospheres methodology for radioactive waste disposal. Final report

Energy Technology Data Exchange (ETDEWEB)

Dorp, F. van [NAGRA (Switzerland)] [and others

1996-09-01

The BIOMOVS II Working Group on Reference Biospheres has focused on the definition and testing of a methodology for developing models to analyse radionuclide behaviour in the biosphere and associated radiological exposure pathways(a Reference Biospheres Methodology). The Working Group limited the scope to the assessment of the long-term implications of solid radioactive waste disposal. Nevertheless, it is considered that many of the basic principles would be equally applicable to other areas of biosphere assessment. The recommended methodology has been chosen to be relevant to different types of radioactive waste and disposal concepts. It includes the justification, arguments and documentation for all the steps in the recommended methodology. The previous experience of members of the Reference Biospheres Working Group was that the underlying premises of a biosphere assessment have often been taken for granted at the early stages of model development, and can therefore fail to be recognized later on when questions of model sufficiency arise, for example, because of changing regulatory requirements. The intention has been to define a generic approach for the formation of an 'audit trail' and hence provide demonstration that a biosphere model is fit for its intended purpose. The starting point for the methodology has three. The Assessment Context sets out what the assessment has to achieve, eg. in terms of assessment purpose and related regulatory criteria, as well as information about the repository system and types of release from the geosphere. The Basic System Description includes the fundamental premises about future climate conditions and human behaviour which, to a significant degree, are beyond prediction. The International FEP List is a generically relevant list of Features, Events and Processes potentially important for biosphere model development. The International FEP List includes FEPs to do with the assessment context. The context examined in

Total Correlation Function Integrals and Isothermal Compressibilities from Molecular Simulations

DEFF Research Database (Denmark)

Wedberg, Rasmus; Peters, Günther H.j.; Abildskov, Jens

2008-01-01

Generation of thermodynamic data, here compressed liquid density and isothermal compressibility data, using molecular dynamics simulations is investigated. Five normal alkane systems are simulated at three different state points. We compare two main approaches to isothermal compressibilities: (1...... in approximately the same amount of time. This suggests that computation of total correlation function integrals is a route to isothermal compressibility, as accurate and fast as well-established benchmark techniques. A crucial step is the integration of the radial distribution function. To obtain sensible results...

Biosphere 2, a nexus of partner networks that improve student experiences and outcomes

Science.gov (United States)

Dontsova, K.; Bonine, K. E.; Batchelor, R. L.; Brinkworth, C.; Keller, J. M.; Hogan, D.; Treloar, D.

2017-12-01

University of Arizona (UA) Biosphere 2 co-convenes several internship opportunities for undergraduate students, including 1) NSF-funded Research Experiences for Undergraduates (REU) Site: "Biosphere 2 Earth Systems Research for Environmental Solutions", 2) NSF-funded INCLUDES program "Collaborative Research: Integrating Indigenous and Western Knowledge to Transform Learning and Discovery in the Geosciences" executed in collaboration with the University Corporation for Atmospheric Research (UCAR), and 3) STEM Teacher and Researcher (STAR) Fellows Program in partnership with California Polytechnic State University - San Luis Obispo. In addition, the B2 REU Site partners with several UA organizations linking research to stakeholders, such as UA Cooperative Extension, Institute of the Environment, and the Water Resources Research Center, and with the UA Graduate College's Undergraduate Research Opportunities Consortium (UROC), which connects a diverse portfolio of summer research programs across the UA campus. Connections among these programs and organizations allow us to improve student experiences and outcomes by leveraging organizational, mentor, and peer diversity and expertise. Each partnership brings unique benefits for the students - from access to teaching experience and perspectives that STAR Fellows provide, to a multitude of professional development programs made possible by pooled resources of UROC participants, to access to networks and knowledge from our outreach partners, to opportunities for continued multi-year learning and support with INCLUDES and UCAR. Coming together allows all partners to better apply outside resources, expertise, and knowledge to bring more value to the students and to help students enrich themselves as well as partner organizations and program participants.

The Integrated Plasma Simulator: A Flexible Python Framework for Coupled Multiphysics Simulation

Energy Technology Data Exchange (ETDEWEB)

Foley, Samantha S [ORNL; Elwasif, Wael R [ORNL; Bernholdt, David E [ORNL

2011-11-01

High-fidelity coupled multiphysics simulations are an increasingly important aspect of computational science. In many domains, however, there has been very limited experience with simulations of this sort, therefore research in coupled multiphysics often requires computational frameworks with significant flexibility to respond to the changing directions of the physics and mathematics. This paper presents the Integrated Plasma Simulator (IPS), a framework designed for loosely coupled simulations of fusion plasmas. The IPS provides users with a simple component architecture into which a wide range of existing plasma physics codes can be inserted as components. Simulations can take advantage of multiple levels of parallelism supported in the IPS, and can be controlled by a high-level ``driver'' component, or by other coordination mechanisms, such as an asynchronous event service. We describe the requirements and design of the framework, and how they were implemented in the Python language. We also illustrate the flexibility of the framework by providing examples of different types of simulations that utilize various features of the IPS.

Governing Portable Conservation and Development Landscapes: Reconsidering Evidence in the Context of the Mbaracayú Biosphere Reserve

Science.gov (United States)

Elgert, Laureen

2014-01-01

Conservation-with-development landscapes, such as UNESCO's Man and Biosphere Reserves, differentiate between areas of "nature" and "society". In Paraguay's Mbaracayú Biosphere Reserve, as elsewhere, this model has been used to support governance that focuses on conservation in the "core area" and sustainable…

User's guide to the biosphere code BIOMOD

International Nuclear Information System (INIS)

Kane, P.

1983-05-01

BIOMOD has been designed to interface with SYVAC, the function of which is to perform generic risk assessments on hypothetical repository-geosphere-biosphere combinations. The user's guide contains the detailed specifications for the models used, a description of the interim user-interface, a specification for required input and definition of output. Sources of error are indicated and reference is made to the database description and other documents issued relating to BIOMOD. (author)

Biosphere assessment for high-level radioactive waste disposal: modelling experiences and discussion on key parameters by sensitivity analysis in JNC

International Nuclear Information System (INIS)

Kato, Tomoko; Makino, Hitoshi; Uchida, Masahiro; Suzuki, Yuji

2004-01-01

In the safety assessment of the deep geological disposal system of the high-level radioactive waste (HLW), biosphere assessment is often necessary to estimate future radiological impacts on human beings (e.g. radiation dose). In order to estimate the dose, the surface environment (biosphere) into which future releases of radionuclides might occur and the associated future human behaviour needs to be considered. However, for a deep repository, such releases might not occur for many thousands of years after disposal. Over such timescales, it is impossible to predict with any certainty how the biosphere and human behaviour will evolve. To avoid endless speculation aimed at reducing such uncertainty, the 'Reference Biospheres' concept has been developed for use in the safety assessment of HLW disposal. As the aim of the safety assessment with a hypothetical HLW disposal system by JNC was to demonstrate the technical feasibility and reliability of the Japanese disposal concept for a range of geological and surface environments, some biosphere models were developed using the 'Reference Biospheres' concept and the BIOMASS Methodology. These models have been used to derive factors to convert the radionuclide flux from a geosphere to a biosphere into a dose (flux to dose conversion factors). Moreover, sensitivity analysis for parameters in the biosphere models was performed to evaluate and understand the relative importance of parameters. It was concluded that transport parameters in the surface environments, annual amount of food consumption, distribution coefficients on soils and sediments, transfer coefficients of radionuclides to animal products and concentration ratios for marine organisms would have larger influence on the flux to dose conversion factors than any other parameters. (author)

Nuclear fuel waste management - biosphere program highlights - 1978 to 1996

Energy Technology Data Exchange (ETDEWEB)

Zach, R

1997-07-01

The biosphere program in support of the development of the disposal concept for Canadian nuclear fuel waste since 1978 is scheduled for close-out. AECL`s Environmental Science Branch (ESB) was mainly responsible for work in this program. In order to preserve as much information as possible, this report highlights many of the key achievements of the program, particularly those related to the development of the BIOTRAC biosphere model and its supporting research. This model was used for the assessment and review of the disposal concept in an environmental impact statement (EIS). The report also treats highlights related to alternative models, external scientific/technical reviews, EIS feedback, and the international BIOMOVS model validation program. Furthermore, it highlights basic aspects of future modelling and research needs in relation to siting a disposal facility. In this, feedback from the various reviews and the EIS is taken into account. Appendices of the report include listings of key ESB staff involved in the program, all the scientific/technical reports and papers produced under the program, contracts let to outside agencies, and issues raised by various participants or intervenors during the EIS review. Although the report is concerned with close-out of the biosphere program, it also provides valuable information for a continuing program concerned with siting a disposal facility. One of the conclusions of the report is that such a program is essential for successfully siting such a facility. (author) Refs.

Nuclear fuel waste management - biosphere program highlights - 1978 to 1996

International Nuclear Information System (INIS)

Zach, R.

1997-07-01

The biosphere program in support of the development of the disposal concept for Canadian nuclear fuel waste since 1978 is scheduled for close-out. AECL's Environmental Science Branch (ESB) was mainly responsible for work in this program. In order to preserve as much information as possible, this report highlights many of the key achievements of the program, particularly those related to the development of the BIOTRAC biosphere model and its supporting research. This model was used for the assessment and review of the disposal concept in an environmental impact statement (EIS). The report also treats highlights related to alternative models, external scientific/technical reviews, EIS feedback, and the international BIOMOVS model validation program. Furthermore, it highlights basic aspects of future modelling and research needs in relation to siting a disposal facility. In this, feedback from the various reviews and the EIS is taken into account. Appendices of the report include listings of key ESB staff involved in the program, all the scientific/technical reports and papers produced under the program, contracts let to outside agencies, and issues raised by various participants or intervenors during the EIS review. Although the report is concerned with close-out of the biosphere program, it also provides valuable information for a continuing program concerned with siting a disposal facility. One of the conclusions of the report is that such a program is essential for successfully siting such a facility. (author)

Using the kingfisher (Alcedo atthis) as a bioindicator of PCBs and PBDEs in the dinghushan biosphere reserve, China.

Science.gov (United States)

Mo, Ling; Wu, Jiang-Ping; Luo, Xiao-Jun; Li, Ke-Lin; Peng, Ying; Feng, An-Hong; Zhang, Qiang; Zou, Fa-Sheng; Mai, Bi-Xian

2013-07-01

The Dinghushan Biosphere Reserve is a nature reserve and a site for the study of tropical and subtropical forest ecosystems. Rapid industrialization and intensive electronic waste-recycling activities around the biosphere reserve have resulted in elevated levels of industrial organic contaminants in the local environment that may cause adverse effects on wildlife that inhabits this area. In the present study, polychlorinated biphenyls (PCBs), polybrominated diphenyl ethers (PBDEs), and 2 alternative brominated flame retardants (BFRs)-decabromodiphenyl ethane (DBDPE) and 1,2-bis(2,4,6-tribromophenoxy) ethane (BTBPE)-were investigated in the biosphere reserve and a reference site by using the kingfisher (Alcedo atthis) as a bioindicator. Residue concentrations in kingfishers from the Dinghushan Biosphere Reserve ranged from 490 ng/g to 3000 ng/g, 51 ng/g to 420 ng/g, 0.44 ng/g to 90 ng/g, and 0.04 ng/g to 0.87 ng/g lipid weight for ∑PCBs, ∑PBDEs, DBDPE, and BTBPE, respectively. With the exception of the BTBPE, these levels were 2 to 5 times higher than those detected in kingfishers from the reference site. The contaminant patterns from the biosphere reserve were also different, with larger PCB contributions in comparison with the reference site. The estimated predator-prey biomagnification factors (BMFs) showed that most of the PCB and PBDE congeners and BTBPE were biomagnified in kingfishers from the biosphere reserve. The calculated toxic equivalent quantity (TEQ) concentrations of major coplanar PCB congeners in kingfishers from the biosphere reserve ranged from 18 pg/g to 66 pg/g wet weight, with some of these TEQ concentrations reaching or exceeding the levels known to impair bird reproduction and survival. Copyright © 2013 SETAC.

Evolving Phytoplankton Stoichiometry Fueled Diversification of the Marine Biosphere

Directory of Open Access Journals (Sweden)

Antonietta Quigg

2012-05-01

Full Text Available The availability of nutrients and the quantity and quality of food at the base of food webs have largely been ignored in discussions of the Phanerozoic record of biodiversity. We examine the role of nutrient availability and phytoplankton stoichiometry (the relative proportions of inorganic nutrients to carbon in the diversification of the marine biosphere. Nutrient availability and phytoplankton stoichiometry played a critical role in the initial diversification of the marine biosphere during the Neoproterozoic. Initial biosphere expansion during this time resulted in the massive sequestration of nutrients into biomass which, along with the geologically slow input of nutrients from land, set the stage for severe nutrient limitation and relatively constant marine biodiversity during the rest of the Paleozoic. Given the slow nutrient inputs from land and low recycling rates, the growth of early-to-middle Paleozoic metazoans remained limited by their having to expend energy to first “burn off” (respire excess carbon in food before the associated nutrients could be utilized for growth and reproduction; the relative equilibrium in marine biodiversity during the Paleozoic therefore appears to be real. Limited nutrient availability and the consequent nutrient imbalance may have delayed the appearance of more advanced carnivores until the Permo-Carboniferous, when widespread orogeny, falling sea level, the spread of forests, greater weathering rates, enhanced ocean circulation, oxygenation, and upwelling all combined to increase nutrient availability. During the Meso-Cenozoic, rising oxygen levels, the continued nutrient input from land, and, especially, increasing rates of bioturbation, enhanced nutrient availability, increasing the nutrient content of phytoplankton that fueled the diversification of the Modern Fauna.

A splitting integration scheme for the SPH simulation of concentrated particle suspensions

Science.gov (United States)

Bian, Xin; Ellero, Marco

2014-01-01

Simulating nearly contacting solid particles in suspension is a challenging task due to the diverging behavior of short-range lubrication forces, which pose a serious time-step limitation for explicit integration schemes. This general difficulty limits severely the total duration of simulations of concentrated suspensions. Inspired by the ideas developed in [S. Litvinov, M. Ellero, X.Y. Hu, N.A. Adams, J. Comput. Phys. 229 (2010) 5457-5464] for the simulation of highly dissipative fluids, we propose in this work a splitting integration scheme for the direct simulation of solid particles suspended in a Newtonian liquid. The scheme separates the contributions of different forces acting on the solid particles. In particular, intermediate- and long-range multi-body hydrodynamic forces, which are computed from the discretization of the Navier-Stokes equations using the smoothed particle hydrodynamics (SPH) method, are taken into account using an explicit integration; for short-range lubrication forces, velocities of pairwise interacting solid particles are updated implicitly by sweeping over all the neighboring pairs iteratively, until convergence in the solution is obtained. By using the splitting integration, simulations can be run stably and efficiently up to very large solid particle concentrations. Moreover, the proposed scheme is not limited to the SPH method presented here, but can be easily applied to other simulation techniques employed for particulate suspensions.

Implications of environmental change for biosphere modelling: work for UK Nirex Ltd

International Nuclear Information System (INIS)

Thorne, M.C.

1990-01-01

Over the timescales of interest in deep geological disposal of radioactive wastes, climate is expected to change radically, with glacial/interglacial cycling anticipated. Climatic conditions and climate change have a influence on the characteristics of the biosphere into which the radionuclides emerge and on the doses to man which may occur. The various factors involved have been taken into account in assessment studies undertaken by the Nirex Disposal Safety Assessment Team. Results from these studies illustrate the major importance of dispersion processes in the biosphere in determining individual radiation doses, and the importance of using self-consistent patterns of human behaviour appropriate to the environment under consideration. 5 refs., 1 tab

Integration of distributed system simulation tools for a holistic approach to integrated building and system design

NARCIS (Netherlands)

Radosevic, M.; Hensen, J.L.M.; Wijsman, A.J.T.M.; Hensen, J.L.M.; Lain, M.

2004-01-01

Advanced architectural developments require an integrated approach to design where simulation tools available today deal. only with a small subset of the overall problem. The aim of this study is to enable run time exchange of necessary data at suitable frequency between different simulation

Transbios - a unified model for assessment of the effect of noxious materials in ground water to the biosphere. Compilation of the model

International Nuclear Information System (INIS)

Rejlek, G.

1992-06-01

This model of radionuclide propagation in the biosphere is part of the project 'Final Deposition of Low- and Medium- active Wastes from Hospitals, University Institutes and Industry'. The six parts are: a flow-and transport model in ground water, an evaporation-transpiration model, a transfer model soil-to-plant, a water cycle- and a food chain model. Solutions are designed and peculiarities of the program are outlined. Finally the individual parts are integrated into the overall model

Understanding local community's values, worldviews and perceptions in the Galloway and Southern Ayrshire Biosphere Reserve, Scotland.

Science.gov (United States)

Hernes, Maya I; Metzger, Marc J

2017-01-15

Biosphere reserves have been studied around the world, but methods to elicit community's values, worldviews and perceptions are missing. A greater understanding of these can help avoid tension and improve successful management. This paper used a mixed-methods survey to elicit local community's environmental values, ecological world views and perceptions of the Galloway and Southern Ayrshire Biosphere Reserve (GSABR). Over three weeks, forty participants from three communities of the GSABR responded to a semi-structured mixed-methods survey. The survey revealed that residents of the GSABR greatly value wildlife and beauty of nature, and that the majority of the respondents showed concern for the environment from an ecocentric worldview. Results also revealed that the most influential tested socio-demographic characteristic affecting people's relationship to their environment is their professional affiliation. Tourism and recreation were seen as major benefits of the recent biosphere designation. Results did highlight contrasting benefits from the designation for different stakeholder groups, which could potentially lead to tensions and should be considered in the reserve management. Given the community's supportive world views and perceptions, greater participation in the biosphere's management in likely to be welcomed and should be used to avoid or mediate any conflicts. The mixed-method survey developed for this study, proved successful in eliciting these themes in the GSABR. We recommend other biosphere reserves replicate this research, to gain better understanding of local communities and increase their support and participation in reserve management. Copyright © 2016 Elsevier Ltd. All rights reserved.

Integrated heat transport simulation of high ion temperature plasma of LHD

International Nuclear Information System (INIS)

Murakami, S.; Yamaguchi, H.; Sakai, A.

2014-10-01

A first dynamical simulation of high ion temperature plasma with carbon pellet injection of LHD is performed by the integrated simulation GNET-TD + TASK3D. NBI heating deposition of time evolving plasma is evaluated by the 5D drift kinetic equation solver, GNET-TD and the heat transport of multi-ion species plasma (e, H, He, C) is studied by the integrated transport simulation code, TASK3D. Achievement of high ion temperature plasma is attributed to the 1) increase of heating power per ion due to the temporal increase of effective charge, 2) reduction of effective neoclassical transport with impurities, 3) reduction of turbulence transport. The reduction of turbulence transport is most significant contribution to achieve the high ion temperature and the reduction of the turbulent transport from the L-mode plasma (normal hydrogen plasma) is evaluated to be a factor about five by using integrated heat transport simulation code. Applying the Z effective dependent turbulent reduction model we obtain a similar time behavior of ion temperature after the C pellet injection with the experimental results. (author)

Integrated predictive modeling simulations of the Mega-Amp Spherical Tokamak

International Nuclear Information System (INIS)

Nguyen, Canh N.; Bateman, Glenn; Kritz, Arnold H.; Akers, Robert; Byrom, Calum; Sykes, Alan

2002-01-01

Integrated predictive modeling simulations are carried out using the BALDUR transport code [Singer et al., Comput. Phys. Commun. 49, 275 (1982)] for high confinement mode (H-mode) and low confinement mode (L-mode) discharges in the Mega-Amp Spherical Tokamak (MAST) [Sykes et al., Phys. Plasmas 8, 2101 (2001)]. Simulation results, obtained using either the Multi-Mode transport model (MMM95) or, alternatively, the mixed-Bohm/gyro-Bohm transport model, are compared with experimental data. In addition to the anomalous transport, neoclassical transport is included in the simulations and the ion thermal diffusivity in the inner third of the plasma is found to be predominantly neoclassical. The sawtooth oscillations in the simulations radially spread the neutral beam injection heating profiles across a broad sawtooth mixing region. The broad sawtooth oscillations also flatten the central temperature and electron density profiles. Simulation results for the electron temperature and density profiles are compared with experimental data to test the applicability of these models and the BALDUR integrated modeling code in the limit of low aspect ratio toroidal plasmas

Simulation Tools and Techniques for Analyzing the Impacts of Photovoltaic System Integration

Science.gov (United States)

Hariri, Ali

Solar photovoltaic (PV) energy integration in distribution networks is one of the fastest growing sectors of distributed energy integration. The growth in solar PV integration is incentivized by various clean power policies, global interest in solar energy, and reduction in manufacturing and installation costs of solar energy systems. The increase in solar PV integration has raised a number of concerns regarding the potential impacts that might arise as a result of high PV penetration. Some impacts have already been recorded in networks with high PV penetration such as in China, Germany, and USA (Hawaii and California). Therefore, network planning is becoming more intricate as new technologies are integrated into the existing electric grid. The integrated new technologies pose certain compatibility concerns regarding the existing electric grid infrastructure. Therefore, PV integration impact studies are becoming more essential in order to have a better understanding of how to advance the solar PV integration efforts without introducing adverse impacts into the network. PV impact studies are important for understanding the nature of the new introduced phenomena. Understanding the nature of the potential impacts is a key factor for mitigating and accommodating for said impacts. Traditionally, electric power utilities relied on phasor-based power flow simulations for planning their electric networks. However, the conventional, commercially available, phasor-based simulation tools do not provide proper visibility across a wide spectrum of electric phenomena. Moreover, different types of simulation approaches are suitable for specific types of studies. For instance, power flow software cannot be used for studying time varying phenomena. At the same time, it is not practical to use electromagnetic transient (EMT) tools to perform power flow solutions. Therefore, some electric phenomena caused by the variability of PV generation are not visible using the conventional

Acetogenesis in the energy-starved deep biosphere - a paradox?

DEFF Research Database (Denmark)

Lever, Mark

2012-01-01

Under anoxic conditions in sediments, acetogens are often thought to be outcompeted by microorganisms performing energetically more favorable metabolic pathways, such as sulfate reduction or methanogenesis. Recent evidence from deep subseafloor sediments suggesting acetogenesis in the presence of...... to be taken into account to understand microbial survival in the energy-depleted deep biosphere....

Integrated fast ignition simulation of cone-guided target with three codes

Energy Technology Data Exchange (ETDEWEB)

Sakagami, H. [Hyogo Univ., Computer Engineering, Himeji, Hyogo (Japan); Johzaki, T.; Nagatomo, H.; Mima, K. [Osaka Univ., Institute of Laser Engineering, Suita, Osaka (Japan)

2004-07-01

It was reported that the fuel core was heated up to {approx} 0.8 keV in the fast ignition experiments with cone-guided targets, but they could not theoretically explain heating mechanisms and achievement of such high temperature. Thus simulations should play an important role in estimating the scheme performance, and we must simulate each phenomenon with individual codes and integrate them under the Fast Ignition Integrated Interconnecting code project. In the previous integrated simulations, fast electrons generated by the laser-plasma interaction were too hot to efficiently heat the core and we got only a 0.096 keV temperature rise. Including the density gap at the contact surface between the cone tip and the imploded plasma, the period of core heating became longer and the core was heated by 0.162 keV, about 69% higher increment compared with ignoring the density gap effect. (authors)

Development of the methodology on priority of element-specific biosphere parameters for geological disposal applicable to any proposed repository site

International Nuclear Information System (INIS)

Kato, Tomoko; Ohi, Takao; Suzuki, Yuji

2009-01-01

It is difficult to acquire all of biosphere parameters for geological disposal at the repository site because several hundreds of the parameters have to be dealt with in one calculation case of the biosphere assessment. Before site-specific activities, it is important to develop the data acquisition methodology of biosphere parameters applicable to any proposed repository site. The methodology for identification of the priority of the parameters was developed for the effective data acquisition of biosphere parameters at the site. First of all, flow diagram was constructed to evaluate the availability of the existing generic biosphere dataset. It was found to be effective for the data acquisition at the site to focus on the element-specific parameters with the existing dataset. Secondly, the priority of the data acquisition was identified for element-specific parameters at the site, with considering the variation of dose rate by combining the significant element-specific parameters. The availability of the existing generic biosphere dataset and the priority on data acquisition were identified for the element-specific parameters of key radionuclides in the safety assessment of geological disposal that should be acquired at the site. This priority list would be useful for effective data acquisition at the site. (author)

Biological effects of extreme environmental conditions. [considering limits of biosphere

Science.gov (United States)

Imshenetskiy, A. A.

1975-01-01

Actions of extreme physical and chemical space factors on microorganisms and plants are elaborated in order to establish limits for the biosphere. Considered are effects of low and high temperatures; ionizing and ultraviolet radiation; various gases; and effects of vibration, desiccation and acceleration.

Radioactive waste management. International projects on biosphere modelling

International Nuclear Information System (INIS)

Carboneras, P.; Cancio, D.

1993-01-01

The paper presents a general overview and discussion on the state of art concerning the biospheric transfer and accumulation of contaminants. A special emphasis is given to the progress achieved in the field of radioactive contaminants and particularly to those implied in radioactive waste disposal. The objectives and advances of the international projects BIOMOVS and VAMP on validation of model predictions are also described. (Author)

Transient simulation and sensitivity analysis for transport of radionuclides in a saturated-unsaturated groundwater flow system

International Nuclear Information System (INIS)

Chen, H.H.

1980-01-01

Radionuclide transport by groundwater flow is an important pathway in the assessment of the environmental impact of radioactive waste disposal to the biosphere. A numerical model was developed to simulate radionuclide transport by groundwater flow and predict the radionuclide discharge rate to the biosphere. A sensitivity analysis methodology was developed to address the sensitivity of the input parameters of the radionuclide transport equation to the specified response of interest

A Methodology to analyze the biosphere in the assessment of deep geological repositories for high level radioactive waste

International Nuclear Information System (INIS)

Pinedo, P.; Smith, G.

1996-11-01

This report summarizes the work done and the achievements reached within the R and D Project that IMA/CIEMAT has had with ENRESA during 1993-1995. The overall R and D Project has a wide radiological protection context, but the work reported here relates only to the development of a Methodology for considering the Biosphere sub-system in the assessments of deep geological repositories for high radioactive wastes (HLW). The main areas concerned within the Methodology have to do with the Biosphere structure and morphology in the long-term relevant to deep disposal of HLW: in the contexts of the assessment of these systems, and appropriate modelling of the behaviour of radionuclides released to the biosphere system and with the associated human exposure. This document first provides a review of the past and present international and national concerns about the biosphere modelling and its importance in relation to the definition of safety criteria. A joint ENRESA/ANDRA/IPSN/CIEMAT study about the definition and practical descriptions of the biosphere systems under different climatic states is then summarized. The Methodology developed by IMA/CIEMAT is outlined with an illustration of the way it works. Different steps and procedures are included for a better practical understanding of the software tools developed within the project to support the application of the Methodology. This methodology is widely based on an international working group on ''Reference Biospheres'', part of the BIOMOVS II Project. Specific software developments have been carried out in collaboration with Qunti Sci Itd and with the Polytechnical University of Madrid. (Author)

Simulation and fabrication of integrated polystyrene microlens in microfluidic system

KAUST Repository

Fan, Yiqiang

2013-05-17

This paper presents a simple and quick method to integrate microlens with the microfluidics systems. The polystyrene (PS) based microlens is fabricated with the free surface thermal compression molding methods, a thin PS sheet with the microlens is bonded to a PMMA substrate which contains the laser ablated microchannels. The convex profiler of the microlens will give a magnified images of the microchannels for easier observation. Optical simulation software is being used for the design and simulation of the microlens to have optimal optical performance with the desired focal length. A microfluidic system with the integrated PS microlens is also fabricated for demonstration.

The simulation research for the dynamic performance of integrated PWR

International Nuclear Information System (INIS)

Yuan Jiandong; Xia Guoqing; Fu Mingyu

2005-01-01

The mathematical model of the reactor core of integrated PWR has been studied and simplified properly. With the lumped parameter method, authors have established the mathematical model of the reactor core, including the neutron dynamic equation, the feedback reactivities model and the thermo-hydraulic model of the reactor. Based on the above equations and models, the incremental transfer functions of the reactor core model have been built. By simulation experimentation, authors have compared the dynamic characteristics of the integrated PWR with the traditional dispersed PWR. The simulation results show that the mathematical models and equations are correct. (authors)

Simulation and fabrication of integrated polystyrene microlens in microfluidic system

KAUST Repository

Fan, Yiqiang; Li, Huawei; Conchouso Gonzalez, David; Foulds, Ian G.

2013-01-01

This paper presents a simple and quick method to integrate microlens with the microfluidics systems. The polystyrene (PS) based microlens is fabricated with the free surface thermal compression molding methods, a thin PS sheet with the microlens is bonded to a PMMA substrate which contains the laser ablated microchannels. The convex profiler of the microlens will give a magnified images of the microchannels for easier observation. Optical simulation software is being used for the design and simulation of the microlens to have optimal optical performance with the desired focal length. A microfluidic system with the integrated PS microlens is also fabricated for demonstration.

On the uncertainty of phenological responses to climate change, and implications for a terrestrial biosphere model

Directory of Open Access Journals (Sweden)

M. Migliavacca

2012-06-01

Full Text Available Phenology, the timing of recurring life cycle events, controls numerous land surface feedbacks to the climate system through the regulation of exchanges of carbon, water and energy between the biosphere and atmosphere.

Terrestrial biosphere models, however, are known to have systematic errors in the simulation of spring phenology, which potentially could propagate to uncertainty in modeled responses to future climate change. Here, we used the Harvard Forest phenology record to investigate and characterize sources of uncertainty in predicting phenology, and the subsequent impacts on model forecasts of carbon and water cycling. Using a model-data fusion approach, we combined information from 20 yr of phenological observations of 11 North American woody species, with 12 leaf bud-burst models that varied in complexity.

Akaike's Information Criterion indicated support for spring warming models with photoperiod limitations and, to a lesser extent, models that included chilling requirements.

We assessed three different sources of uncertainty in phenological forecasts: parameter uncertainty, model uncertainty, and driver uncertainty. The latter was characterized running the models to 2099 using 2 different IPCC climate scenarios (A1fi vs. B1, i.e. high CO₂ emissions vs. low CO₂ emissions scenario. Parameter uncertainty was the smallest (average 95% Confidence Interval – CI: 2.4 days century⁻¹ for scenario B1 and 4.5 days century⁻¹ for A1fi, whereas driver uncertainty was the largest (up to 8.4 days century⁻¹ in the simulated trends. The uncertainty related to model structure is also large and the predicted bud-burst trends as well as the shape of the smoothed projections varied among models (±7.7 days century⁻¹ for A1fi, ±3.6 days century⁻¹ for B1. The forecast sensitivity of bud-burst to temperature (i.e. days bud-burst advanced per

Uni- and omnidirectional simulation tools for integrated optics

NARCIS (Netherlands)

Stoffer, Remco

2001-01-01

This thesis presents several improvements on simulation methods in integrated optics, as well as some new methods. Both uni- and omnidirectional tools are presented; for the unidirectional methods, the emphasis is on higher-order accuracy; for the omnidirectional methods, the boundary conditions are

Application of biosphere models in the Biomosa project: a comparative assessment of five European radioactive waste disposal sites

International Nuclear Information System (INIS)

Kowe, R.; Mobbs, S.; Proehl, G.; Bergstrom, U.; Kanyar, B.; Olyslaegers, G.; Zeevaert, T.; Simon, I.

2004-01-01

The BIOMOSA (Biosphere Models for Safety Assessment of Radioactive Waste Disposal) project is a part of the EC fifth framework research programme. The main goal of this project is the improvement of the scientific basis for the application of biosphere models in the framework of long-term safety studies of radioactive waste disposal facilities. Furthermore, the outcome of the project will provide operators and regulatory bodies with guidelines for performance assessments of repository systems. The study focuses on the development and application of site-specific models and a generic biosphere tool BIOGEM (Biosphere Generic Model), using the experience from the national programmes and the IAEA BIOMASS reference biosphere methodology. The models were applied to 5 typical locations in the EU, resulting in estimates of the annual individual doses to the critical groups and the ranking of the importance of the pathways for each of the sites. The results of the site-specific and generic models were then compared. In all cases the doses calculated by the generic model were less than the doses obtained from the site-specific models. Uncertainty in the results was estimated by means of stochastic calculations which allow a comparison of the overall model uncertainty with the variability across the different sites considered. (author)

Developpement of a GoldSim Biosphere Model, Evaluation, and Its Verification

International Nuclear Information System (INIS)

Lee, Youn Myoung; Hwang, Yong Soo

2009-12-01

For the purpose of evaluating dose rate to individual due to long-term release of nuclides from the repository for an HLW or a pyroprocessing repository, a biosphere assessment model and the implemented program based on BIOMASS methodology have been developed by utilizing GoldSim, a general model developing tool. To show its practicability and usability as well as to see the sensitivity of parametric and scenario variations to the annual exposure, some probabilistic calculations are made and investigated. For the cases when changing the exposure groups and associated GBIs as well as varying selected input values, all of which seem important for the biosphere evaluation, dose rate per nuclide release rate is probabilistically calculated and analyzed. A series of comparison studies with JAEA, Japan have been also carried out to verify the model

Simulation analysis of globally integrated logistics and recycling strategies

Energy Technology Data Exchange (ETDEWEB)

Song, S.J.; Hiroshi, K. [Hiroshima Inst. of Tech., Graduate School of Mechanical Systems Engineering, Dept. of In formation and Intelligent Systems Engineering, Hiroshima (Japan)

2004-07-01

This paper focuses on the optimal analysis of world-wide recycling activities associated with managing the logistics and production activities in global manufacturing whose activities stretch across national boundaries. Globally integrated logistics and recycling strategies consist of the home country and two free trading economic blocs, NAFTA and ASEAN, where significant differences are found in production and disassembly cost, tax rates, local content rules and regulations. Moreover an optimal analysis of globally integrated value-chain was developed by applying simulation optimization technique as a decision-making tool. The simulation model was developed and analyzed by using ProModel packages, and the results help to identify some of the appropriate conditions required to make well-performed logistics and recycling plans in world-wide collaborated manufacturing environment. (orig.)

The biosphere at Forsmark. Data, assumptions and models used in the SR-Can assessment

International Nuclear Information System (INIS)

Karlsson, Sara; Kautsky, Ulrik; Loefgren, Anders; Soederbaeck, Bjoern

2006-10-01

This report summarises the method adopted for safety assessment following a radionuclide release into the biosphere. The approach utilises the information about the site as far as possible and presents a way of calculating risk to humans. The parameters are topography, where there is good understanding of the present conditions and the development over time is fairly predictable. The topography affects surface hydrology, sedimentation, size of drainage areas and the characteristics of ecosystems. Other parameters are human nutritional intake, which is assumed to be constant over time, and primary production (photosynthesis), which also is a fairly constant parameter over time. The Landscape Dose Factor approach (LDF) gives an integrated measure for the site and also resolves the issues relating to the size of the group with highest exposure. If this approach is widely accepted as method, still some improvements and refinement are necessary, e.g. collecting missing site data, reanalysing site data, reviewing radionuclide specific data, reformulating ecosystem models and evaluating the results with further sensitivity analysis. The report presents descriptions and estimates not presented elsewhere, as well as summaries of important steps in the biosphere modelling that are presented in more detail in separate reports. The intention is to give the reader a coherent description of the steps taken to calculate doses to biota and humans, including a description of the data used, the rationale for a number of assumptions made during parameterisation, and of how the landscape context is applied in the modelling, and also to present the models used and the results obtained

The biosphere at Forsmark. Data, assumptions and models used in the SR-Can assessment

Energy Technology Data Exchange (ETDEWEB)

Karlsson, Sara; Kautsky, Ulrik; Loefgren, Anders; Soederbaeck, Bjoern [eds.

2006-10-15

This report summarises the method adopted for safety assessment following a radionuclide release into the biosphere. The approach utilises the information about the site as far as possible and presents a way of calculating risk to humans. The parameters are topography, where there is good understanding of the present conditions and the development over time is fairly predictable. The topography affects surface hydrology, sedimentation, size of drainage areas and the characteristics of ecosystems. Other parameters are human nutritional intake, which is assumed to be constant over time, and primary production (photosynthesis), which also is a fairly constant parameter over time. The Landscape Dose Factor approach (LDF) gives an integrated measure for the site and also resolves the issues relating to the size of the group with highest exposure. If this approach is widely accepted as method, still some improvements and refinement are necessary, e.g. collecting missing site data, reanalysing site data, reviewing radionuclide specific data, reformulating ecosystem models and evaluating the results with further sensitivity analysis. The report presents descriptions and estimates not presented elsewhere, as well as summaries of important steps in the biosphere modelling that are presented in more detail in separate reports. The intention is to give the reader a coherent description of the steps taken to calculate doses to biota and humans, including a description of the data used, the rationale for a number of assumptions made during parameterisation, and of how the landscape context is applied in the modelling, and also to present the models used and the results obtained.

Safety case for the disposal of spent nuclear fuel at Olkiluoto - Biosphere assessment 2012

Energy Technology Data Exchange (ETDEWEB)

NONE

2013-09-15

Biosphere Assessment sits within Posiva Oy's safety case 'TURVA-2012' report portfolio and has the objectives of presenting the assessment methodology, a summary of the surface environment at the Olkiluoto site and an assessment of the surface environment scenarios that have been identified in Formulation of Radionuclide Release Scenarios. A base scenario, variant scenarios and disturbance scenarios are considered. For the base scenario, a Reference Case has been identified and analysed. For the other scenarios, a range of biosphere calculation cases has been identified and analysed. All calculation cases, except cases addressing inadvertent human intrusion, are based on repository calculation cases, assessed in Assessment of Radionuclide Release Scenarios, in which failure of a single spent fuel canister gives radionuclide releases to the biosphere within the dose assessment time window of ten millennia. The biosphere calculation cases take into account uncertainties in the development of the terrain and the ecosystems, land use, location of the releases to the surface environment, radionuclide transport properties and dietary profiles. The resulting annual doses to humans for all calculation cases for the base and variant scenarios are below the radiation dose constraints for most exposed people and other people, as set out by the Finnish regulator, generally by more than two orders of magnitude. The resulting absorbed doses rates to plants and animals for all calculation cases imply that any radiological impacts of these releases will be negligible (orig.)

Safety case for the disposal of spent nuclear fuel at Olkiluoto - Biosphere assessment 2012

International Nuclear Information System (INIS)

2013-09-01

Biosphere Assessment sits within Posiva Oy's safety case 'TURVA-2012' report portfolio and has the objectives of presenting the assessment methodology, a summary of the surface environment at the Olkiluoto site and an assessment of the surface environment scenarios that have been identified in Formulation of Radionuclide Release Scenarios. A base scenario, variant scenarios and disturbance scenarios are considered. For the base scenario, a Reference Case has been identified and analysed. For the other scenarios, a range of biosphere calculation cases has been identified and analysed. All calculation cases, except cases addressing inadvertent human intrusion, are based on repository calculation cases, assessed in Assessment of Radionuclide Release Scenarios, in which failure of a single spent fuel canister gives radionuclide releases to the biosphere within the dose assessment time window of ten millennia. The biosphere calculation cases take into account uncertainties in the development of the terrain and the ecosystems, land use, location of the releases to the surface environment, radionuclide transport properties and dietary profiles. The resulting annual doses to humans for all calculation cases for the base and variant scenarios are below the radiation dose constraints for most exposed people and other people, as set out by the Finnish regulator, generally by more than two orders of magnitude. The resulting absorbed doses rates to plants and animals for all calculation cases imply that any radiological impacts of these releases will be negligible (orig.)

Methodology for the biosphere analysis in the evaluation of deep geological repositories for high radioactive waste

International Nuclear Information System (INIS)

Cancio, D.; Pinedo, P.; Aguero, A.; Simon, I.; Torres, C.; Robles, B.; Smith, G.M.; Little, R.; Watkings, B.; Brice, A.; Jaen, J.A.; Coronado, S.

1997-01-01

This report summarizes the work done and the achievements reached within the R and D Project that IMA/CIEMAT has had with ENRESA during 1993-1995. The overal R and D Project has a wide radiological protection context, but the work reported here relates only to the development of a Methodology for considering the Biosphere sub-system in the assessments of deep geological repositories for high radioactive wastes (HLW). The main areas concerned within the Methodology have to do with Biosphere structure and morphology in the long-term relevant to deep disposal of HLW: in the contexts of the assessment of these systems, and appropiate modelling of the behaviour of radionuclides released to the biosphere system and with the associated human exposure. This document first provides a review of the past and present international and national concerns about the biosphere modelling and its importance in relation to the definition of safety criteria. A joint ENRESA/ANDRA/IPSN/CIEMAT study about the definition and proactical descriptions of the biosphere systems under different climatic states is then summarized. The Methodology developed by IMA/CIEMAT is outlined with an illustration of the way it works. Different steps and procedures are included for a better proactical understanding of the software tools developed within the project to support the application of the Methologoy. This Methodology is widely based on an international working group on Reference Biospheres part national work for ENRESA has been supported under a collaborative agreement with QuantiSci Ltd. Specific software development have been carried out in collaboration with QuantiSci Ltd and with the Polytechnical University of Madrid. Most of the items included within the Methodology and moreover the Methodology as a whole, follows a continuos progressive development. It is increasinaly recognized that assessment capabilities, establisment of safety criteria and regulatory framework and the steps in a

Development of the biosphere code BIOMOD: final report

International Nuclear Information System (INIS)

Kane, P.

1983-05-01

Final report to DoE on the development of the biosphere code BIOMOD. The work carried out under the contract is itemised. Reference is made to the six documents issued along with the final report. These consist of two technical notes issued as interim consultative documents, a user's guide and a programmer's guide to BIOMOD, a database description, program test document and a technical note entitled ''BIOMOD - preliminary findings''. (author)

Integrating Symbolic Execution with Sensornet Simulation for Efficient Bug Finding

OpenAIRE

Österlind, Fredrik; Sasnauskas, Raimondas; Dustmann, Oscar Soria; Dunkels, Adam; Wehrle, Klaus

2010-01-01

High-coverage testing of sensornet applications is vital for pre-deployment bug cleansing, but has previously been difficult due to the limited set of available tools. We integrate the KleeNet symbolic execution engine with the COOJA network simulator to allow for straight-forward and intuitive high-coverage testing initiated from a simulation environment. A tight coupling of simulation and testing helps detect, narrow down, and fix complex interaction bugs in an early ...

Architecture for an integrated real-time air combat and sensor network simulation

Science.gov (United States)

Criswell, Evans A.; Rushing, John; Lin, Hong; Graves, Sara

2007-04-01

An architecture for an integrated air combat and sensor network simulation is presented. The architecture integrates two components: a parallel real-time sensor fusion and target tracking simulation, and an air combat simulation. By integrating these two simulations, it becomes possible to experiment with scenarios in which one or both sides in a battle have very large numbers of primitive passive sensors, and to assess the likely effects of those sensors on the outcome of the battle. Modern Air Power is a real-time theater-level air combat simulation that is currently being used as a part of the USAF Air and Space Basic Course (ASBC). The simulation includes a variety of scenarios from the Vietnam war to the present day, and also includes several hypothetical future scenarios. Modern Air Power includes a scenario editor, an order of battle editor, and full AI customization features that make it possible to quickly construct scenarios for any conflict of interest. The scenario editor makes it possible to place a wide variety of sensors including both high fidelity sensors such as radars, and primitive passive sensors that provide only very limited information. The parallel real-time sensor network simulation is capable of handling very large numbers of sensors on a computing cluster of modest size. It can fuse information provided by disparate sensors to detect and track targets, and produce target tracks.

Stochastic simulation of PWR vessel integrity for pressurized thermal shock conditions

International Nuclear Information System (INIS)

Jackson, P.S.; Moelling, D.S.

1984-01-01

A stochastic simulation methodology is presented for performing probabilistic analyses of Pressurized Water Reactor vessel integrity. Application of the methodology to vessel-specific integrity analyses is described in the context of Pressurized Thermal Shock (PTS) conditions. A Bayesian method is described for developing vessel-specific models of the density of undetected volumetric flaws from ultrasonic inservice inspection results. Uncertainty limits on the probabilistic results due to sampling errors are determined from the results of the stochastic simulation. An example is provided to illustrate the methodology

ATLAS Detector Simulation in the Integrated Simulation Framework applied to the W Boson Mass Measurement

CERN Document Server

Ritsch, Elmar; Froidevaux, Daniel; Salzburger, Andreas

One of the cornerstones for the success of the ATLAS experiment at the Large Hadron Collider (LHC) is a very accurate Monte Carlo detector simulation. However, a limit is being reached regarding the amount of simulated data which can be produced and stored with the computing resources available through the worldwide LHC computing grid (WLCG). The Integrated Simulation Framework (ISF) is a novel approach to detector simula- tion which enables a more efficient use of these computing resources and thus allows for the generation of more simulated data. Various simulation technologies are combined to allow for faster simulation approaches which are targeted at the specific needs of in- dividual physics studies. Costly full simulation technologies are only used where high accuracy is required by physics analyses and fast simulation technologies are applied everywhere else. As one of the first applications of the ISF, a new combined simulation approach is developed for the generation of detector calibration samples ...

Systems to prevent nuclear material from re-entering the biosphere

International Nuclear Information System (INIS)

Buden, D.; Angelo, J.A. Jr.; Lapin, S.

1992-01-01

Nuclear systems are key to the success of many space missions as we have witness in the Apollo science packages, Viking Mars landers, and Pioneer and Voyager planetary exploration missions. There is always a concern that nuclear materials will re-enter the biosphere from a mission abort. In fact, this has happened for radioisotope and reactor power systems. Until now, the emphasize has been an incorporating on-board means to protect the biosphere. With possible increased use of nuclear power and propulsion systems in space, Project SIREN (Search, Intercept, Retrieve, Expulsion, Nuclear) has determined that external means can be used as a back up to current on-board systems to provide assured prevention of nuclear materials from re-entry once in space. The technology base to implement a SIREN vehicle has been assessed and a data base and mission analysis program prepared (called THOR) to evaluate various missions. The degree of hazard from existing nuclear power systems in space has been assessed and found to be significant

WINS. Market Simulation Tool for Facilitating Wind Energy Integration

Energy Technology Data Exchange (ETDEWEB)

Shahidehpour, Mohammad [Illinois Inst. of Technology, Chicago, IL (United States)

2012-10-30

Integrating 20% or more wind energy into the system and transmitting large sums of wind energy over long distances will require a decision making capability that can handle very large scale power systems with tens of thousands of buses and lines. There is a need to explore innovative analytical and implementation solutions for continuing reliable operations with the most economical integration of additional wind energy in power systems. A number of wind integration solution paths involve the adoption of new operating policies, dynamic scheduling of wind power across interties, pooling integration services, and adopting new transmission scheduling practices. Such practices can be examined by the decision tool developed by this project. This project developed a very efficient decision tool called Wind INtegration Simulator (WINS) and applied WINS to facilitate wind energy integration studies. WINS focused on augmenting the existing power utility capabilities to support collaborative planning, analysis, and wind integration project implementations. WINS also had the capability of simulating energy storage facilities so that feasibility studies of integrated wind energy system applications can be performed for systems with high wind energy penetrations. The development of WINS represents a major expansion of a very efficient decision tool called POwer Market Simulator (POMS), which was developed by IIT and has been used extensively for power system studies for decades. Specifically, WINS provides the following superiorities; (1) An integrated framework is included in WINS for the comprehensive modeling of DC transmission configurations, including mono-pole, bi-pole, tri-pole, back-to-back, and multi-terminal connection, as well as AC/DC converter models including current source converters (CSC) and voltage source converters (VSC); (2) An existing shortcoming of traditional decision tools for wind integration is the limited availability of user interface, i.e., decision

Geospatial assessment and monitoring of historical forest cover changes (1920-2012) in Nilgiri Biosphere Reserve, Western Ghats, India.

Science.gov (United States)

Satish, K V; Saranya, K R L; Reddy, C Sudhakar; Krishna, P Hari; Jha, C S; Rao, P V V Prasada

2014-12-01

Deforestation in the biosphere reserves, which are key Protected Areas has negative impacts on biodiversity, climate, carbon fluxes and livelihoods. Comprehensive study of deforestation in biosphere reserves is required to assess the impact of the management effectiveness. This article assesses the changes in forest cover in various zones and protected areas of Nilgiri Biosphere Reserve, the first declared biosphere reserve in India which forms part of Western Ghats-a global biodiversity hotspot. In this study, we have mapped the forests from earliest available topographical maps and multi-temporal satellite data spanning from 1920's to 2012 period. Mapping of spatial extent of forest cover, vegetation types and land cover was carried out using visual interpretation technique. A grid cell of 1 km × 1 km was generated for time series change analysis to understand the patterns in spatial distribution of forest cover (1920-1973-1989-1999-2006-2012). The total forest area of biosphere reserve was found to be 5,806.5 km(2) (93.8 % of total geographical area) in 1920. Overall loss of forest cover was estimated as 1,423.6 km(2) (24.5 % of the total forest) with reference to 1920. Among the six Protected Areas, annual deforestation rate of >0.5 was found in Wayanad wildlife sanctuary during 1920-1973. The deforestation in Nilgiri Biosphere Reserve is mainly attributed to conversion of forests to plantations and agriculture along with submergence due to construction of dams during 1920 to 1989. Grid wise analysis indicates that 851 grids have undergone large-scale negative changes of >75 ha of forest loss during 1920-1973 while, only 15 grids have shown >75 ha loss during 1973-1989. Annual net rate of deforestation for the period of 1920 to 1973 was calculated as 0.5 followed by 0.1 for 1973 to 1989. Our analysis shows that there was large-scale deforestation before the declaration of area as biosphere reserve in 1986; however, the deforestation has drastically

Discretely Integrated Condition Event (DICE) Simulation for Pharmacoeconomics.

Science.gov (United States)

Caro, J Jaime

2016-07-01

Several decision-analytic modeling techniques are in use for pharmacoeconomic analyses. Discretely integrated condition event (DICE) simulation is proposed as a unifying approach that has been deliberately designed to meet the modeling requirements in a straightforward transparent way, without forcing assumptions (e.g., only one transition per cycle) or unnecessary complexity. At the core of DICE are conditions that represent aspects that persist over time. They have levels that can change and many may coexist. Events reflect instantaneous occurrences that may modify some conditions or the timing of other events. The conditions are discretely integrated with events by updating their levels at those times. Profiles of determinant values allow for differences among patients in the predictors of the disease course. Any number of valuations (e.g., utility, cost, willingness-to-pay) of conditions and events can be applied concurrently in a single run. A DICE model is conveniently specified in a series of tables that follow a consistent format and the simulation can be implemented fully in MS Excel, facilitating review and validation. DICE incorporates both state-transition (Markov) models and non-resource-constrained discrete event simulation in a single formulation; it can be executed as a cohort or a microsimulation; and deterministically or stochastically.

Advances in Integrated Vehicle Thermal Management and Numerical Simulation

Directory of Open Access Journals (Sweden)

Yan Wang

2017-10-01

Full Text Available With the increasing demands for vehicle dynamic performance, economy, safety and comfort, and with ever stricter laws concerning energy conservation and emissions, vehicle power systems are becoming much more complex. To pursue high efficiency and light weight in automobile design, the power system and its vehicle integrated thermal management (VITM system have attracted widespread attention as the major components of modern vehicle technology. Regarding the internal combustion engine vehicle (ICEV, its integrated thermal management (ITM mainly contains internal combustion engine (ICE cooling, turbo-charged cooling, exhaust gas recirculation (EGR cooling, lubrication cooling and air conditioning (AC or heat pump (HP. As for electric vehicles (EVs, the ITM mainly includes battery cooling/preheating, electric machines (EM cooling and AC or HP. With the rational effective and comprehensive control over the mentioned dynamic devices and thermal components, the modern VITM can realize collaborative optimization of multiple thermodynamic processes from the aspect of system integration. Furthermore, the computer-aided calculation and numerical simulation have been the significant design methods, especially for complex VITM. The 1D programming can correlate multi-thermal components and the 3D simulating can develop structuralized and modularized design. Additionally, co-simulations can virtualize simulation of various thermo-hydraulic behaviors under the vehicle transient operational conditions. This article reviews relevant researching work and current advances in the ever broadening field of modern vehicle thermal management (VTM. Based on the systematic summaries of the design methods and applications of ITM, future tasks and proposals are presented. This article aims to promote innovation of ITM, strengthen the precise control and the performance predictable ability, furthermore, to enhance the level of research and development (R&D.

Biosphere transport and radiation dose calculations resulting from radioactive waste stored in deep salt formation (PACOMA-project)

International Nuclear Information System (INIS)

Jong, E.J. de; Koester, H.W.; Vries, W.J. de; Lembrechts, J.F.

1990-03-01

Parts are presented of the results of a safety-assessment study of disposal of medium and low level radioactive waste in salt formations in the Netherlands. The study concerns several disposal concepts for 2 kinds of salt formation, a deep dome and a shallow dome. 7 cases were studied with the same Dutch inventory and 1 with a reference inventory R, in order to compare results with those of other PACOMA participants. The total activity of the reference inventory R is 30 percent lower than the Dutch inventory, but some long living nuclides such as I-129, Np-237 and U-238 have a considerably higher activity. This reference inventor R has been combined with the disposal concept of mined cavities in a shallow salt dome. In each case. the released fraction of stored radio-nuclides moves gradually with water through the geosphere to the bio-sphere where it enters a river. River water is used for sprinkler irrigation and for drinking by man and livestock. The dispersal of the radionuclides into the biosphere is calculated with the BIOS program of the NRPB. Subroutines linked to the program add doses via different pathways to obtain a maximum individual dose, a collective dose and an integrated collective dose. This study presents results of these calculations. (author). 11 refs.; 39 figs.; 111 tabs

The Symbiose project: an integrated framework for performing environmental radiological risk assessment

International Nuclear Information System (INIS)

Gonze, M.A.; Mourlon, C.; Garcia-Sanchez, L.; Beaugelin, K.; Chen, T.; Le Dizes, S.

2004-01-01

Human health and ecological risk assessments usually require the integration of a wide range of environmental data and modelling approaches, with a varying level of detail dependent on the management objectives, the complexity of the site and the level of ignorance about the pollutant behaviour/toxicity. Like most scientists and assessors did it recently, we recognized the need for developing comprehensive, integrated and flexible approaches to risk assessment. To meet these needs, IRSN launched the Symbiose project (2002-2006) which aims first, at designing a framework for integrating and managing data, methods and knowledge of some relevance in radiological risk to humans/biota assessment studies, and second, at implementing this framework in an information management, modelling and calculation platform. Feasibility developments (currently completed) led to the specification of a fully integrated, object-oriented and hierarchical approach for describing the fate, transport and effect of radionuclides in spatially-distributed environmental systems. This innovative approach has then been implemented in a platform prototype, main components of which are a user-friendly and modular simulation environment (e.g. using GoldSim toolbox), and a hierarchical object-oriented biosphere database. Both conceptual and technical developments will be presented here. (author)

Ecotourism and its effects on wildlife of Pachmarhi Biosphere Reserve

African Journals Online (AJOL)

The present paper focused on ecotourism and its effects on wildlife. In the present scenario the ecotourism is a grooming sector in developing nations. However, its impact on wildlife and indigenous people has become a controversial issue. Pachmarhi Biosphere Reserve site explores the multitude of interactions that exist ...

G189A analytical simulation of the RITE Integrated Waste Management-Water System

Science.gov (United States)

Coggi, J. V.; Clonts, S. E.

1974-01-01

This paper discusses the computer simulation of the Integrated Waste Management-Water System Using Radioisotopes for Thermal Energy (RITE) and applications of the simulation. Variations in the system temperature and flows due to particular operating conditions and variations in equipment heating loads imposed on the system were investigated with the computer program. The results were assessed from the standpoint of the computed dynamic characteristics of the system and the potential applications of the simulation to system development and vehicle integration.

The challenges and opportunities of transboundary cooperation through the lens of the East Carpathians Biosphere Reserve

Directory of Open Access Journals (Sweden)

Tanya D. Taggart-Hodge

2016-12-01

Full Text Available A significant challenge of our time is conserving biological diversity while maintaining economic development and cultural values. The United Nations Educational, Scientific and Cultural Organization has established biosphere reserves within its Man and the Biosphere program as a model means for accomplishing this very challenge. The East Carpathians Biosphere Reserve (ECBR, spreading across Poland, Slovakia, and Ukraine, represents a large social-ecological system (SES that has been protected under the biosphere reserve designation since 1998. We have explored its successes and failures in improving human livelihoods while safeguarding its ecosystems. The SES framework, which includes governance system, actors, resources, and external influences, was used as a frame of analysis. The outcomes of this protected area have been mixed; its creation led to national and international collaboration, yet some actor groups remain excluded. Implementation of protocols arising from the Carpathian Convention has been slow, while deforestation, hunting, erosion, temperature extremes, and changes in species behavior remain significant threats but have also been factors in ecological adaptation. The loss of cultural links and traditional knowledge has also been significant. Nevertheless, this remains a highly biodiverse area. Political barriers and institutional blockages will have to be removed to ensure this reserve fulfills its role as a model region for international collaboration and capacity building. These insights drawn from the ECBR demonstrate that biosphere reserves are indeed learning sites for sustainable development and that this case is exemplary in illustrating the challenges, but more importantly, the opportunities that arise when ensuring parallel care and respect for people and ecosystems through the model of transboundary protected areas around the world.

MathModelica - An Extensible Modeling and Simulation Environment with Integrated Graphics and Literate Programming

OpenAIRE

Fritzson, Peter; Gunnarsson, Johan; Jirstrand, Mats

2002-01-01

MathModelica is an integrated interactive development environment for advanced system modeling and simulation. The environment integrates Modelica-based modeling and simulation with graphic design, advanced scripting facilities, integration of program code, test cases, graphics, documentation, mathematical type setting, and symbolic formula manipulation provided via Mathematica. The user interface consists of a graphical Model Editor and Notebooks. The Model Editor is a graphical user interfa...

Drastic environmental change and its effects on a planetary biosphere

Science.gov (United States)

Schulze-Makuch, Dirk; Irwin, Louis N.; Fairén, Alberto G.

2013-07-01

Environmental conditions can change drastically and rapidly during the natural history of a planetary body. These changes affect the biosphere and can spur evolution via the mechanism of directional selection leading to the innovation of new processes and forms of life, or alternatively leading to the extinction of certain life forms. Based on the natural history of Earth, the effect on a planet's biosphere depends on three factors: (1) the nature and time scale of change, (2) the composition of the biosphere prior to change, and (3) the nature of the environment following the change. Though Earth has undergone various periods of drastic environmental change, life has shown an enormous resiliency and became more diverse and complex as a consequence of these events. Mars and Venus have undergone even larger environmental changes, both from habitable conditions under which the origin of life (or transfer of life from Earth) seem plausible, to a dry and cold planet punctuated by wetter conditions, and a hyperthermic greenhouse, respectively. Given its planetary history, life on Mars could have retreated to a psychrophilic lifestyle in the deep subsurface or to environmental near-surface niches, such as hydrothermal regions and caves. Further, strong directional selection could have pushed putative martian life to evolve alternating cycles between active and dormant forms, as well as the innovation of new traits adapted to challenging near-surface conditions. Life in the subsurface or on the surface of Venus seems impossible today, but microorganisms may have adapted to thrive in the lower cloud layer, possibly using a biochemical strategy analogous to Photosystem I and chemoautotrophic sulfur metabolism, and employing cycloocta sulfur for UV protection.

Guatemala conservation concession for the Maya Biosphere Reserve

OpenAIRE

Conservation International

2007-01-01

Metadata only record The national government of Guatemala has issued timber concessions to local communities within its 2 million hectare Maya Biosphere Reserve. Working under this framework, CI is proposing a conservation concession contract with two communities. The concessions would be designed to pay salaries for conservation managers, to invest in projects such as guiding tourists to nearby archaeological sites and to provide community services such as education and health care, in ex...

Basic Research in Human–Computer–Biosphere Interaction

Directory of Open Access Journals (Sweden)

Hill Hiroki Kobayashi

2014-09-01

Full Text Available In this study, we present a vision of how a human–computer–biosphere interaction (HCBI can facilitate a sustainable society. HCBI extends and transforms the subject of human–computer interaction from countable people, objects, pets, and plants into an auditory biosphere that is an uncountable, a complex, and a non-linguistic soundscape. As an example, utilizing HCBI to experience forest soundscapes can help us feel one with nature, without physically being present in nature. The goal of HCBI is to achieve ecological interactions between humans and nature through computer systems without causing environmental destruction. To accomplish this, information connectivity must be created despite the physical separation between humans and the environment. This combination should also ensure ecological neutrality. In this paper, we present an overview of an HCBI concept, related work, methodologies, and developed interfaces. We used pre-recorded animal calls to enable a bio-acoustical feedback from the target wildlife. In this study, we primarily focus on the design and evaluation of a bio-acoustic interaction system utilizing tracking collars, microphones, speakers, infrared cameras, infrared heat sensors, micro-climate sensors, radio-tracking devices, GPS devices, radio clocks, embedded Linux boards, high-capacity batteries, and high-speed wireless communication devices. Our experiments successfully demonstrated bio-acoustic interactions between wildlife—more specifically, an endangered species of a wild cat—and human beings via a computer system, thus validating the HCBI concept.

Environmental dispersion of long-lived radionuclides in the geosphere and biosphere

International Nuclear Information System (INIS)

Myttenaere, C.; Avogadro, A.; Murray, C.N.

1984-01-01

Knowledge of the migration of radionuclides in the terrestrial environment is one of the key elements in assessment of the risk resulting from potential or actual releases from nuclear facilities. Among the various radionuclides arising from the nuclear fuel cycle, long-lived fission products and actinides are of particular concern for the different disposal options considered for radioactive wastes. Current knowledge of the processes that are responsible for their migration through different compartments of the environment (geosphere and biosphere) is reviewed. Migration in the geosphere is governed by a number of different mechanisms that have a wide range of reaction rates. Certain processes may be identified that control short-term behaviour and others long term. In assessing these processes, which relate to the interaction between solid and liquid phases, special attention is paid to the time-scale as well as the dynamic nature of the controlling processes. The current state of knowledge and the major research efforts under way concerning the predominant processes identified in different geological disposal options are reviewed. Various mechanisms control the behaviour of long-lived radionuclides and actinides in the soil and their migration in the biosphere. Regarding the biological uptake, particular attention is drawn to the 'ageing' phenomena and their consequences on radioactivity transfer in the different food chains. Similarities in the biogeochemical properties of natural and man-made elements that could further our understanding of the long-term behaviour of radionuclides are discussed. Consequently, all these considerations justify study of the biogeochemical aspects of the transfer of radioactivity in the environment. In the actual state of knowledge the uncertainties in the parameters used in the models may lead to difficulty in long-term dose estimation. Assessment of the dose received by man appears to be more strongly limited by the quality of

Bird checklist, Guánica Biosphere Reserve, Puerto Rico

Science.gov (United States)

Wayne J. Arendt; John Faaborg; Miguel Canals; Jerry Bauer

2015-01-01

This research note compiles 43 years of research and monitoring data to produce the first comprehensive checklist of the dry forest avian community found within the Guánica Biosphere Reserve. We provide an overview of the reserve along with sighting locales, a list of 185 birds with their resident status and abundance, and a list of the available bird habitats....

The first IGAC scientific conference: global atmospheric-biospheric chemistry. Book of abstracts

International Nuclear Information System (INIS)

1993-04-01

Various global/transfrontier air pollution problems are described. The causes of these problems are presented. The impact on ecology and biosphere are discussed. Special attention is given to the greenhouse causing agents

Ecotourism and its effects on wildlife of Pachmarhi Biosphere Reserve

African Journals Online (AJOL)

use

sustainable use of wildlife in the Manu Biosphere. Reserve and Puero Maldonado National Parks of Peru in. (Groom et al., 2000), recognizes the benefits of ecotourism as it helps to .... leading tour companies that collaborate with lodges and tour groups. Therefore, the local communities do not benefit from the revenue.

Development of a reference biospheres methodology for radioactive waste disposal. Final report

International Nuclear Information System (INIS)

Dorp, F. van

1996-09-01

The BIOMOVS II Working Group on Reference Biospheres has focused on the definition and testing of a methodology for developing models to analyse radionuclide behaviour in the biosphere and associated radiological exposure pathways (a Reference Biospheres Methodology). The Working Group limited the scope to the assessment of the long-term implications of solid radioactive waste disposal. Nevertheless, it is considered that many of the basic principles would be equally applicable to other areas of biosphere assessment. The recommended methodology has been chosen to be relevant to different types of radioactive waste and disposal concepts. It includes the justification, arguments and documentation for all the steps in the recommended methodology. The previous experience of members of the Reference Biospheres Working Group was that the underlying premises of a biosphere assessment have often been taken for granted at the early stages of model development, and can therefore fail to be recognized later on when questions of model sufficiency arise, for example, because of changing regulatory requirements. The intention has been to define a generic approach for the formation of an 'audit trail' and hence provide demonstration that a biosphere model is fit for its intended purpose. The starting point for the methodology has three. The Assessment Context sets out what the assessment has to achieve, eg. in terms of assessment purpose and related regulatory criteria, as well as information about the repository system and types of release from the geosphere. The Basic System Description includes the fundamental premises about future climate conditions and human behaviour which, to a significant degree, are beyond prediction. The International FEP List is a generically relevant list of Features, Events and Processes potentially important for biosphere model development. The International FEP List includes FEPs to do with the assessment context. The context examined in detail by

Value orientations and environmental beliefs in five countries - Validity of an instrument to measure egoistic, altruistic and biospheric value orientations

NARCIS (Netherlands)

de Groot, Judith I. M.; Steg, Linda

Various scholars argue that egoistic, altruistic, and biospheric value orientations are important for understanding environmental beliefs and behavior. However, little empirical evidence has been provided for the distinction between altruistic and biospheric values. This study examines whether this

Biosphere assessment due to radionuclide release in waste disposal repository through food chain pathways

International Nuclear Information System (INIS)

Ko, H. S.; Kang, C. S.

2000-01-01

The long-term safety of radioactive waste disposal is assessed by the consequence analysis of radionuclides release, of which the final step is carried out by the biosphere assessment. the radiation dose is calculated from the food chain modeling which especially necessitates site-specific input database and exposure pathways. A biosphere model in consideration of new exposure pathways has been analyzed, and a program for food chain calculation has been developed. The up-to-data input data are reflected and the new exposure pathways are considered in the program, so the code shows more realistic and reliable results

Nuclear Application Programs Development and Integration for a Simulator

Energy Technology Data Exchange (ETDEWEB)

Park, Hyun-Joon; Lee, Tae-Woo [KEPCO Engineering and Construction Co., Deajeon (Korea, Republic of)