Waste biorefineries - integrating anaerobic digestion and microalgae cultivation for bioenergy production.

Science.gov (United States)

Chen, Yi-di; Ho, Shih-Hsin; Nagarajan, Dillirani; Ren, Nan-Qi; Chang, Jo-Shu

2018-04-01

Commercialization of microalgal cultivation has been well realized in recent decades with the use of effective strains that can yield the target products, but it is still challenged by the high costs arising from mass production, harvesting, and further processing. Recently, more interest has been directed towards the utilization of waste resources, such as sludge digestate, to enhance the economic feasibility and sustainability of microalgae production. Anaerobic digestion for waste disposal and phototrophic microalgal cultivation are well-characterized technologies in both fields. However, integration of anaerobic digestion and microalgal cultivation to achieve substantial economic and environmental benefits is extremely limited, and thus deserves more attention and research effort. In particular, combining these two makes possible an ideal 'waste biorefinery' model, as the C/N/P content in the anaerobic digestate can be used to produce microalgal biomass that serves as feedstock for biofuels, while biogas upgrading can simultaneously be performed by phototrophic CO 2 fixation during microalgal growth. This review is thus aimed at elucidating recent advances as well as challenges and future directions with regard to waste biorefineries associated with the integration of anaerobic waste treatment and microalgal cultivation for bioenergy production. Copyright © 2017 Elsevier Ltd. All rights reserved.

Field to fuel: developing sustainable biorefineries.

Science.gov (United States)

Jenkins, Robin; Alles, Carina

2011-06-01

Life-cycle assessment (LCA) can be used as a scientific decision support technique to quantify the environmental implications of various biorefinery process, feedstock, and integration options. The goal of DuPont's integrated corn biorefinery (ICBR) project, a cost-share project with the United States Department of Energy, was to demonstrate the feasibility of a cellulosic ethanol biorefinery concept. DuPont used LCA to guide research and development to the most sustainable cellulosic ethanol biorefinery design in its ICBR project and will continue to apply LCA in support of its ongoing effort with joint venture partners. Cellulosic ethanol is a biofuel which has the potential to provide a sustainable solution to the nation's growing concerns around energy supply and climate change. A successful biorefinery begins with sustainable removal of biomass from the field. Michigan State University (MSU) used LCA to estimate the environmental performance of corn grain, corn stover, and the corn cob portion of the stover, grown under various farming practices for several corn growing locations in the United States Corn Belt. In order to benchmark the future technology options for producing cellulosic ethanol with existing technologies, LCA results for fossil energy consumption and greenhouse gas (GHG) emissions are compared to alternative ethanol processes and conventional gasoline. Preliminary results show that the DuPont ICBR outperforms gasoline and other ethanol technologies in the life-cycle impact categories considered here.

Designing optimal bioethanol networks with purification for integrated biorefineries

International Nuclear Information System (INIS)

Shenoy, Akshay U.; Shenoy, Uday V.

2014-01-01

Highlights: • An analytical method is devised for bioethanol network integration with purification. • Minimum fresh bioethanol flow and pinch are found by the Unified Targeting Algorithm. • Optimal bioethanol networks are then synthesized by the Nearest Neighbors Algorithm. • Continuous targets and networks are developed over the purifier inlet flowrate range. • Case study of a biorefinery producing bioethanol from wheat shows large savings. - Abstract: Bioethanol networks with purification for processing pathways in integrated biorefineries are targeted and designed in this work by an analytical approach not requiring graphical constructions. The approach is based on six fundamental equations involving eight variables: two balance equations for the stream flowrate and the bioethanol load over the total network system; one equation for the above-pinch bioethanol load being picked up by the minimum fresh resource and the purified stream; and three equations for the purification unit. A solution strategy is devised by specifying the two variables associated with the purifier inlet stream. Importantly, continuous targeting is then possible over the entire purifier inlet flowrate range on deriving elegant formulae for the remaining six variables. The Unified Targeting Algorithm (UTA) is utilized to establish the minimum fresh bioethanol resource flowrate and identify the pinch purity. The fresh bioethanol resource flowrate target is shown to decrease linearly with purifier inlet flowrate provided the pinch is held by the same point. The Nearest Neighbors Algorithm (NNA) is used to methodically synthesize optimal networks matching bioethanol demands and sources. A case study of a biorefinery producing bioethanol from wheat with arabinoxylan (AX) coproduction is presented. It illustrates the versatility of the approach in generating superior practical designs with up to nearly 94% savings for integrated bioethanol networks, both with and without process

Integration of Microbial Electrolysis Cells (MECs) in the Biorefinery for Production of Ethanol, H2 and Phenolics

DEFF Research Database (Denmark)

Thygesen, Anders; Thomsen, Anne Belinda; Possemiers, Sam

2010-01-01

production. The mass and energy balances as well as the economical evaluations, show that this strategy may be useful for additional generation of hydrogen and lignin, thereby increasing the final yield of this biorefinery. From one ton of straw, the yield of ethanol upon yeast fermentation is estimated......In a biorefinery, biomass is converted into a variety of chemicals, materials and energy. A typical example is the lignocellulosic ethanol biorefinery process, in which substrates such as wheat straw are used as a feedstock for production of ethanol. In this work, an integrated biorefinery...

Sugarcane-Biorefinery.

Science.gov (United States)

Vaz, Sílvio

2017-03-17

Concepts such as biorefinery and green chemistry focus on the usage of biomass, as with the oil value chain. However, it can cause less negative impact on the environment. A biorefinery based on sugarcane (Saccharum spp.) as feedstock is an example, because it can integrate into the same physical space, of processes for obtaining biofuels (ethanol), chemicals (from sugars or ethanol), electricity, and heat.The use of sugarcane as feedstock for biorefineries is dictated by its potential to supply sugars, ethanol, natural polymers or macromolecules, organic matter, and other compounds and materials. By means of conversion processes (chemical, biochemical, and thermochemical), sugarcane biomass can be transformed into high-value bioproducts to replace petrochemicals, as a bioeconomy model.

Novel heat–integrated and intensified biorefinery process for cellulosic ethanol production from lignocellulosic biomass

International Nuclear Information System (INIS)

Nhien, Le Cao; Long, Nguyen Van Duc; Lee, Moonyong

2017-01-01

Highlights: • A compact biorefinery design was proposed for cellulosic ethanol purification. • Actual fermentation broth from lignocellulosic biomass was considered. • Process integration and intensification achieves competitive biorefinery context. • The response surface method optimizes the complex column structure effectively. • The proposed process could save up to 47.6% of total annual cost. - Abstract: Biofuels have the most potential as an alternative to fossil fuels and overcoming global warming, which has become one of the most serious environmental issues over the past few decades. As the world confronts food shortages due to an increase in world population, the development of biofuels from inedible lignocellulosic feedstock may be more sustainable in the long term. Inspired by the NREL conventional process, this paper proposes a novel heat–integrated and intensified biorefinery design for cellulosic ethanol production from lignocellulosic biomass. For the preconcentration section, heat pump assisted distillation and double–effect heat integration were evaluated, while a combination of heat–integrated technique and intensified technique, extractive dividing wall column (EDWC), was applied to enhance the process energy and cost efficiency for the purification section. A biosolvent, glycerol, which can be produced from biodiesel production, was used as the extracting solvent in an EDWC to obtain a high degree of integration in a biorefinery context. All configuration alternatives were simulated rigorously using Aspen Plus were based on the energy requirements, total annual costs (TAC), and total carbon dioxide emissions (TCE). In addition, the structure of the EDWC was optimized using the reliable response surface method, which was carried out using Minitab statistical software. The simulation results showed that the proposed heat–integrated and intensified process can save up to 47.6% and 56.9% of the TAC and TCE for the purification

Hydrothermal pretreatments of macroalgal biomass for biorefineries

DEFF Research Database (Denmark)

Ruiz, Héctor A.; Rodríguez-Jasso, Rosa M.; Aguedo, Mario

2015-01-01

in accordance with the integrated biorefineries. Furthermore, biorefinery concept requires processes that allow efficient utilization of all components of the biomass. The pretreatment step in a biorefinery is often based on hydrothermal principles of high temperatures in aqueous solution. Therefore...

System visualization of integrated biofuels and high value chemicals developed within the MacroAlgaeBiorefinery (MAB3) project

DEFF Research Database (Denmark)

Seghetta, Michele; Hasler, Berit; Bastianoni, Simone

MacroAlgaeBiorefinery (MAB3) may functions as production platform and raw material supplier for future sustainable production chains of biofuels and high value chemicals. Biofuels are interesting energy source but challenges in terms of the composition of the biomass and resulting energy...... efficiencies has to be compensated for to make the biofuel prices competitive in replacing fossil fuel. Since it is difficult to increase the yield of the single biorefinery, the overall system productivity can be improved integrating different sub-systems. In this study, macroalgae cultivation in Denmark...... is integrated with a biogas biorefinery, a bioethanol biorefinery and a fish feed industry. The modeled system is able to adapt itself to different amount and quality of feedstock and to maximize valuable outputs (e.g. bio-fuels and chemical). Macroalgae are harvested and utilized as feedstock in bioethanol...

Life cycle assessment of biofuels from an integrated Brazilian algae-sugarcane biorefinery

International Nuclear Information System (INIS)

Souza, Simone P.; Gopal, Anand R.; Seabra, Joaquim E.A.

2015-01-01

Sugarcane ethanol biorefineries in Brazil produce carbon dioxide, electricity and heat as byproducts. These are essential inputs for algae biodiesel production. In this paper, we assessed ethanol's life cycle greenhouse gas emissions and fossil energy use produced in an integrated sugarcane and algae biorefinery where biodiesel replaces petroleum diesel for all agricultural operations. Carbon dioxide from cane juice fermentation is used as the carbon source for algae cultivation, and sugarcane bagasse is the sole source of energy for the entire facility. Glycerin produced from the biodiesel plant is consumed by algae during the mixotrophic growth phase. We assessed the uncertainties through a detailed Monte-Carlo analysis. We found that this integrated system can improve both the life cycle greenhouse gas emissions and the fossil energy use of sugarcane ethanol by around 10% and 50%, respectively, compared to a traditional Brazilian sugarcane ethanol distillery. - Highlights: • A high diesel consumption is associated to the ethanol sugarcane life-cycle. • Sugarcane industry can provide sources of carbon and energy for the algae growing. • The sugarcane-algae integration can improve the ethanol life-cycle performance. • This integration is a promising pathway for the deployment of algae biodiesel. • There are still significant techno-economic barriers associated with algae biodiesel

Sapphire Energy - Integrated Algal Biorefinery

Energy Technology Data Exchange (ETDEWEB)

White, Rebecca L. [Sapphire Energy, Inc., Columbus, NM (United States). Columbus Algal Biomass Farm; Tyler, Mike [Sapphire Energy, Inc., San Diego, CA (United States)

2015-07-22

Sapphire Energy, Inc. (SEI) is a leader in large-scale photosynthetic algal biomass production, with a strongly cohesive research, development, and operations program. SEI takes a multidiscipline approach to integrate lab-based strain selection, cultivation and harvest and production scale, and extraction for the production of Green Crude oil, a drop in replacement for traditional crude oil.. SEI’s technical accomplishments since 2007 have produced a multifunctional platform that can address needs for fuel, feed, and other higher value products. Figure 1 outlines SEI’s commercialization process, including Green Crude production and refinement to drop in fuel replacements. The large scale algal biomass production facility, the SEI Integrated Algal Biorefinery (IABR), was built in Luna County near Columbus, New Mexico (see fig 2). The extraction unit was located at the existing SEI facility in Las Cruces, New Mexico, approximately 95 miles from the IABR. The IABR facility was constructed on time and on budget, and the extraction unit expansion to accommodate the biomass output from the IABR was completed in October 2012. The IABR facility uses open pond cultivation with a proprietary harvesting method to produce algal biomass; this biomass is then shipped to the extraction facility for conversion to Green Crude. The operation of the IABR and the extraction facilities has demonstrated the critical integration of traditional agricultural techniques with algae cultivation knowledge for algal biomass production, and the successful conversion of the biomass to Green Crude. All primary unit operations are de-risked, and at a scale suitable for process demonstration. The results are stable, reliable, and long-term cultivation of strains for year round algal biomass production. From June 2012 to November 2014, the IABR and extraction facilities produced 524 metric tons (MT) of biomass (on a dry weight basis), and 2,587 gallons of Green Crude. Additionally, the IABR

Case study: Preliminary assessment of integrated palm biomass biorefinery for bioethanol production utilizing non-food sugars from oil palm frond petiole

International Nuclear Information System (INIS)

Abdullah, Sharifah Soplah Syed; Shirai, Yoshihito; Ali, Ahmad Amiruddin Mohd; Mustapha, Mahfuzah; Hassan, Mohd Ali

2016-01-01

Highlights: • Fermentable sugars production from oil palm frond by integrated technology concept. • Bioethanol production from oil palm frond sugars in a biorefinery. • Palm oil mills have sufficient excess energy and steam to support biorefinery. • The net energy ratio of bioethanol from oil palm frond petiole is 7.48. - Abstract: In this case study, a preliminary assessment on the bioethanol production from oil palm frond (OPF) petiole sugars within an integrated palm biomass biorefinery was carried out. Based on the case study of 4 neighbouring palm oil mills, approximately 55,600 t/y of fermentable sugars could be obtained from OPF petiole. The integrated biorefinery will be located at one of the 4 mills. The mill has potential excess energy comprising 3.64 GW h/y of electricity and 177,000 t/y of steam which are sufficient to run the biorefinery. With 33.9 million litres/y of bioethanol production, the specific production cost of bioethanol is estimated at $ 0.52/l bioethanol, compared to $ 0.31–0.34/l bioethanol produced from sugarcane and $ 0.49–0.60/l bioethanol from other lignocellulosics. The net energy ratio of 7.48 for bioethanol production from OPF provides a promising alternative for OPF utilization as a non-food sugar feedstock.

Biorefinery: from biomass to chemicals and fuels

National Research Council Canada - National Science Library

Aresta, M; Dibenedetto, Angela; Dumeignil, Franck

2012-01-01

... to end-user requirements) of advanced biorefineries. This concept attempts to integrate the different scientific and industrial communities with the expectation to achieve a breakthrough beyond the "business as usual" scenario. DG Research has been frequently requested to work in closer coordination between its different Themes in order to better answer ...

Pilot-Scale Biorefinery: Sustainable Transport Fuels from Biomass and Algal Residues via Integrated Pyrolysis, Catalytic Hydroconversion and Co-processing with Vacuum Gas Oil

Energy Technology Data Exchange (ETDEWEB)

Elliott, Douglas [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Olarte, M. V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hart, T. R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2016-07-21

Beginning in 2010, UOP, along with the Department of Energy and other project partners, designed a pathway for an integrated biorefinery to process solid biomass into transportation fuel blendstocks. The integrated biorefinery (IBR) would convert second generation feedstocks into pyrolysis oil which would then be upgraded into fuel blendstocks without the limitations of traditional biofuels.

Biomass pre-extraction, hydrolysis and conversion process improvements fro an integrated biorefinery

Energy Technology Data Exchange (ETDEWEB)

Jansen, Robert [Virdia, Inc., Danville, VA (United States)

2014-12-23

In this project, Virdia will show that it can improve the production of sugars suitable for the conversion into advanced biofuels from a range of woods. Several biomass feedstocks (Pine wood chips & Eucalyptus wood chips) will be tested on this new integrated biorefinery platform. The resultant drop-in biodiesel can be a cost-effective petroleum-replacement that can compete with projected market prices

Biorefinery.nl 2006 : the results of the 1st year of the Dutch Network on Biorefinery, BioRef 0606

NARCIS (Netherlands)

Zwart, R.W.R.; Ree, van R.; Annevelink, E.; Jong, de E.

2006-01-01

The Dutch Network on Biorefinery (Biorefinery.nl) is a joint initiative of the Energy research Centre of the Netherlands (ECN) and Wageningen University and Research Centre (WUR). It is meant to inform industry, research institutes, universities, NGOs, governments and the general public about

Opportunities for Dutch Roadmap Biorefineries

International Nuclear Information System (INIS)

Annevelink, E.; Broeze, J.; Van Ree, R.

2009-09-01

This Dutch Roadmap Biorefinery forms the framework and knowledge basis for Research, Development and Demonstration (RD and D) activities, covering both technical and non-technical issues, necessary to develop biorefinery-based value chains to such an extend that large-scale market implementation as part of the future Bio-based Economy will become a reality. The Roadmap describes the broad landscape of biorefinery options in The Netherlands. The descriptions of possible initiatives within the so called Moonshots (general biorefinery strategies containing more specific biorefinery-based value chains that will become fully operational at industrial scale in the short and midterm to facilitate the transition to a Bio-based Economy in the longer-term) deliberately do not contain the names of parties that might be involved. However, many of the current initiatives have been described in another document, the 'Status Report Biorefinery 2007'. Also the exact economics of possible initiatives have not been specified yet. These will become clearer when proposals will be submitted by consortia of the stakeholders involved.

Integrated production of cellulosic bioethanol and succinic acid from industrial hemp in a biorefinery concept

DEFF Research Database (Denmark)

Kuglarz, Mariusz; Alvarado-Morales, Merlin; Karakashev, Dimitar Borisov

2016-01-01

The aim of this study was to develop integrated biofuel (cellulosic bioethanol) and biochemical (succinic acid) production from industrial hemp (Cannabis sativa L.) in a biorefinery concept. Two types of pretreatments were studied (dilute-acid and alkaline oxidative method). High cellulose recovery...... productivity. With respect to succinic acid production, the highest productivity was obtained after liquid fraction fermentation originated from steam treatment with 1.5% of acid. The mass balance calculations clearly showed that 149 kg of EtOH and 115 kg of succinic acid can be obtained per 1 ton of dry hemp....... Results obtained in this study clearly document the potential of industrial hemp for a biorefinery....

Biorefineries: Current activities and future developments

International Nuclear Information System (INIS)

Demirbas, Ayhan

2009-01-01

This paper reviews the current refuel valorization facilities as well as the future importance of biorefineries. A biorefinery is a facility that integrates biomass conversion processes and equipment to produce fuels, power, and chemicals from biomass. Biorefineries combine the necessary technologies of the biorenewable raw materials with those of chemical intermediates and final products. Char production by pyrolysis, bio-oil production by pyrolysis, gaseous fuels from biomass, Fischer-Tropsch liquids from biomass, hydrothermal liquefaction of biomass, supercritical liquefaction, and biochemical processes of biomass are studied and concluded in this review. Upgraded bio-oil from biomass pyrolysis can be used in vehicle engines as fuel.

Biorefineries: Current activities and future developments

Energy Technology Data Exchange (ETDEWEB)

Demirbas, Ayhan [Sila Science, Trabzon (Turkey)

2009-11-15

This paper reviews the current refuel valorization facilities as well as the future importance of biorefineries. A biorefinery is a facility that integrates biomass conversion processes and equipment to produce fuels, power, and chemicals from biomass. Biorefineries combine the necessary technologies of the biorenewable raw materials with those of chemical intermediates and final products. Char production by pyrolysis, bio-oil production by pyrolysis, gaseous fuels from biomass, Fischer-Tropsch liquids from biomass, hydrothermal liquefaction of biomass, supercritical liquefaction, and biochemical processes of biomass are studied and concluded in this review. Upgraded bio-oil from biomass pyrolysis can be used in vehicle engines as fuel. (author)

Biorefinery opportunities for the forest products industries

Science.gov (United States)

Alan W. Rudie

2013-01-01

Wood residues offer biorefinery opportunities for new products in our industries including fuel and chemicals. But industry must have two capabilities to succeed with biorefineries. Most forest products companies already have the first capability: knowing where the resource is, how to get it, and how much it will cost. They will need to integrate the acquisition of...

Biorefineries. Prerequisite for the realization of a future bioeconomy

Energy Technology Data Exchange (ETDEWEB)

Wagemann, K. [DECHEMA e.V., Frankfurt am Main (Germany)

2012-07-01

The current discussion on how to establish a bioeconomy aims in particular at a significant increase of the share of renewable raw materials in the feedstock pool for the production of chemicals and materials; this share currently is around 12%. Such products can be intermediate chemicals, presently already produced from petroleum. Other chemicals, which can be components of new value chains, are also being discussed. In addition materials like biopolymers are already used directly in consumer goods. These considerations imply a higher demand on renewable raw materials especially from plants. Biorefineries will play an important role in meeting this demand. The German Government has decided to draw up a roadmap being established by a group of independent experts from industry and academia. This roadmap describes in a systematic way status and perspectives of the different biorefinery concepts. It takes economic and ecological aspects into considerations and analyses the R and D demand. The following definition is taken as a basis for the analysis: 'A biorefinery is characterised by having a dedicated, integrative overall approach, using biomass as a versatile raw material source for the sustainable production of a spectrum of different intermediates and marketable products (chemicals, materials, bioenergy and food/feed co-products) by using the biomass components as complete as possible.' The analysis considers the following promising concepts: - Sugar biorefinery and Starch biorefinery; - Plant oil biorefinery including Algae lipid biorefinery; - Lignocellulose (Cellulose/Hemicellulose/Lignin) biorefinery including Green (green fibre/green juice) biorefinery; - Synthesis gas biorefinery; - Biogas biorefinery. The roadmap analyses the strengths, weaknesses, opportunities and threats of the different concepts. For several specific examples preliminary economical and ecological assessment were carried out. The lecture will also give examples how these

Environmental and economic sustainability of integrated production in bio-refineries : The thistle case in Sardinia

NARCIS (Netherlands)

Yazan, Devrim; Mandras, Giovanni; Garau, Giorgio

2016-01-01

This paper aims at evaluating the environmental and economic sustainability of bio-refineries that produce multiple products through their supply chains (SCs). A physical enterprise input-output (EIO) model is used to quantify the material/energy/waste flows and integrated to the monetary EIO model

Pilot-Scale Biorefinery: Sustainable Transport Fuels from Biomass via Integrated Pyrolysis and Catalytic Hydroconversion - Wastewater Cleanup by Catalytic Hydrothermal Gasification

Energy Technology Data Exchange (ETDEWEB)

Elliott, Douglas C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Olarte, Mariefel V. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hart, Todd R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2015-06-19

DOE-EE Bioenergy Technologies Office has set forth several goals to increase the use of bioenergy and bioproducts derived from renewable resources. One of these goals is to facilitate the implementation of the biorefinery. The biorefinery will include the production of liquid fuels, power and, in some cases, products. The integrated biorefinery should stand-alone from an economic perspective with fuels and power driving the economy of scale while the economics/profitability of the facility will be dependent on existing market conditions. UOP LLC proposed to demonstrate a fast pyrolysis based integrated biorefinery. Pacific Northwest National Laboratory (PNNL) has expertise in an important technology area of interest to UOP for use in their pyrolysis-based biorefinery. This CRADA project provides the supporting technology development and demonstration to allow incorporation of this technology into the biorefinery. PNNL developed catalytic hydrothermal gasification (CHG) for use with aqueous streams within the pyrolysis biorefinery. These aqueous streams included the aqueous phase separated from the fast pyrolysis bio-oil and the aqueous byproduct streams formed in the hydroprocessing of the bio-oil to finished products. The purpose of this project was to demonstrate a technically and economically viable technology for converting renewable biomass feedstocks to sustainable and fungible transportation fuels. To demonstrate the technology, UOP constructed and operated a pilot-scale biorefinery that processed one dry ton per day of biomass using fast pyrolysis. Specific objectives of the project were to: The anticipated outcomes of the project were a validated process technology, a range of validated feedstocks, product property and Life Cycle data, and technical and operating data upon which to base the design of a full-scale biorefinery. The anticipated long-term outcomes from successful commercialization of the technology were: (1) the replacement of a significant

Waste biorefineries: Enabling circular economies in developing countries.

Science.gov (United States)

Nizami, A S; Rehan, M; Waqas, M; Naqvi, M; Ouda, O K M; Shahzad, K; Miandad, R; Khan, M Z; Syamsiro, M; Ismail, I M I; Pant, Deepak

2017-10-01

This paper aims to examine the potential of waste biorefineries in developing countries as a solution to current waste disposal problems and as facilities to produce fuels, power, heat, and value-added products. The waste in developing countries represents a significant source of biomass, recycled materials, chemicals, energy, and revenue if wisely managed and used as a potential feedstock in various biorefinery technologies such as fermentation, anaerobic digestion (AD), pyrolysis, incineration, and gasification. However, the selection or integration of biorefinery technologies in any developing country should be based on its waste characterization. Waste biorefineries if developed in developing countries could provide energy generation, land savings, new businesses and consequent job creation, savings of landfills costs, GHG emissions reduction, and savings of natural resources of land, soil, and groundwater. The challenges in route to successful implementation of biorefinery concept in the developing countries are also presented using life cycle assessment (LCA) studies. Copyright © 2017 Elsevier Ltd. All rights reserved.

Microalgae biorefineries: The Brazilian scenario in perspective.

Science.gov (United States)

Brasil, B S A F; Silva, F C P; Siqueira, F G

2017-10-25

Biorefineries have the potential to meet a significant part of the growing demand for energy, fuels, chemicals and materials worldwide. Indeed, the bio-based industry is expected to play a major role in energy security and climate change mitigation during the 21th century. Despite this, there are challenges related to resource consumption, processing optimization and waste minimization that still need to be overcome. In this context, microalgae appear as a promising non-edible feedstock with advantages over traditional land crops, such as high productivity, continuous harvesting throughout the year and minimal problems regarding land use. Importantly, both cultivation and microalgae processing can take place at the same site, which increases the possibilities for process integration and a reduction in logistic costs at biorefinery facilities. This review describes the actual scenario for microalgae biorefineries integration to the biofuels and petrochemical industries in Brazil, while highlighting the major challenges and recent advances in microalgae large-scale production. Copyright © 2016 Elsevier B.V. All rights reserved.

How Does Alkali Aid Protein Extraction in Green Tea Leaf Residue: A Basis for Integrated Biorefinery of Leaves

Science.gov (United States)

Zhang, Chen; Sanders, Johan P. M.; Xiao, Ting T.; Bruins, Marieke E.

2015-01-01

Leaf protein can be obtained cost-efficiently by alkaline extraction, but overuse of chemicals and low quality of (denatured) protein limits its application. The research objective was to investigate how alkali aids protein extraction of green tea leaf residue, and use these results for further improvements in alkaline protein biorefinery. Protein extraction yield was studied for correlation to morphology of leaf tissue structure, protein solubility and hydrolysis degree, and yields of non-protein components obtained at various conditions. Alkaline protein extraction was not facilitated by increased solubility or hydrolysis of protein, but positively correlated to leaf tissue disruption. HG pectin, RGII pectin, and organic acids were extracted before protein extraction, which was followed by the extraction of cellulose and hemi-cellulose. RGI pectin and lignin were both linear to protein yield. The yields of these two components were 80% and 25% respectively when 95% protein was extracted, which indicated that RGI pectin is more likely to be the key limitation to leaf protein extraction. An integrated biorefinery was designed based on these results. PMID:26200774

How Does Alkali Aid Protein Extraction in Green Tea Leaf Residue: A Basis for Integrated Biorefinery of Leaves.

Directory of Open Access Journals (Sweden)

Chen Zhang

Full Text Available Leaf protein can be obtained cost-efficiently by alkaline extraction, but overuse of chemicals and low quality of (denatured protein limits its application. The research objective was to investigate how alkali aids protein extraction of green tea leaf residue, and use these results for further improvements in alkaline protein biorefinery. Protein extraction yield was studied for correlation to morphology of leaf tissue structure, protein solubility and hydrolysis degree, and yields of non-protein components obtained at various conditions. Alkaline protein extraction was not facilitated by increased solubility or hydrolysis of protein, but positively correlated to leaf tissue disruption. HG pectin, RGII pectin, and organic acids were extracted before protein extraction, which was followed by the extraction of cellulose and hemi-cellulose. RGI pectin and lignin were both linear to protein yield. The yields of these two components were 80% and 25% respectively when 95% protein was extracted, which indicated that RGI pectin is more likely to be the key limitation to leaf protein extraction. An integrated biorefinery was designed based on these results.

Integrated torrefaction vs. external torrefaction – A thermodynamic analysis for the case of a thermochemical biorefinery

International Nuclear Information System (INIS)

Clausen, Lasse R.

2014-01-01

Integrated and external torrefaction is analyzed and compared via thermodynamic modeling. In this paper, integrated torrefaction is defined as torrefaction integrated with entrained flow gasification. External torrefaction is defined as the decentralized production of torrefied wood pellets and centralized conversion of the pellets by entrained flow gasification. First, the syngas production of the two methods was compared. Second, the two methods were compared by considering complete biorefineries with either integrated torrefaction or external torrefaction. The first part of the analysis showed that the biomass to syngas efficiency can be increased from 63% to 86% (LHV-dry) when switching from external torrefaction to integrated torrefaction. The second part of the analysis showed that the total energy efficiency (biomass to methanol + net electricity) could be increased from 53% to 63% when switching from external torrefaction to integrated torrefaction. The costs of this increase in energy efficiency are as follows: 1) more difficult transport, storage and handling of the biomass feedstock (wood chips vs. torrefied wood pellets); 2) reduced plant size; 3) no net electricity production; and 4) a more complex plant design. - Highlights: • Integrated torrefaction is compared with external torrefaction. • Biomass to syngas energy efficiencies of 63–86% are achieved. • Two thermochemical biorefinery are designed and analysed by thermodynamic modeling. • Biomass to fuel + electricity energy efficiencies of 53–63% are achieved. • The pros and cons of integrated torrefaction are described

Solazyme Integrated Biorefinery (SzIBR): Diesel Fuels from Heterotrophic Algae

Energy Technology Data Exchange (ETDEWEB)

Brinkmann, David [Solazyme, Inc., South San Francisco, CA (United States)

2014-12-23

Under Department of Energy Award Number DE-EE0002877 (the “DOE Award”), Solazyme, Inc. (“Solazyme”) has built a demonstration scale “Solazyme Integrated Biorefinery (SzlBR).” The SzIBR was built to provide integrated scale-up of Solazyme’s novel heterotrophic algal oil biomanufacturing process, validate the projected commercial-scale economics of producing multiple algal oils, and to enable Solazyme to collect the data necessary to complete the design of its first commercial-scale facility. Solazyme’s technology enables it to convert a range of low-cost plant-based sugars into high-value oils. Solazyme’s renewable products replace or enhance oils derived from the world’s three existing sources—petroleum, plants, and animal fats. Solazyme tailors the composition of its oils to address specific customer requirements, offering superior performance characteristics and value. This report summarizes history and the results of the project.

Amyris, Inc. Integrated Biorefinery Project Summary Final Report - Public Version

Energy Technology Data Exchange (ETDEWEB)

Gray, David; Sato, Suzanne; Garcia, Fernando; Eppler, Ross; Cherry, Joel

2014-03-12

The Amyris pilot-scale Integrated Biorefinery (IBR) leveraged Amyris synthetic biology and process technology experience to upgrade Amyris’s existing Emeryville, California pilot plant and fermentation labs to enable development of US-based production capabilities for renewable diesel fuel and alternative chemical products. These products were derived semi-synthetically from high-impact biomass feedstocks via microbial fermentation to the 15-carbon intermediate farnesene, with subsequent chemical finishing to farnesane. The Amyris IBR team tested and provided methods for production of diesel and alternative chemical products from sweet sorghum, and other high-impact lignocellulosic feedstocks, at pilot scale. This enabled robust techno-economic analysis (TEA), regulatory approvals, and a basis for full-scale manufacturing processes and facility design.

Methodology for optimization of process integration schemes in a biorefinery under uncertainty

International Nuclear Information System (INIS)

Marta Abreu de las Villas (Cuba))" data-affiliation=" (Departamento de Ingeniería Química. Facultad de Química y Farmacia. Universidad Central Marta Abreu de las Villas (Cuba))" >González-Cortés, Meilyn; Marta Abreu de las Villas (Cuba))" data-affiliation=" (Departamento de Ingeniería Química. Facultad de Química y Farmacia. Universidad Central Marta Abreu de las Villas (Cuba))" >Martínez-Martínez, Yenisleidys; Marta Abreu de las Villas (Cuba))" data-affiliation=" (Departamento de Ingeniería Química. Facultad de Química y Farmacia. Universidad Central Marta Abreu de las Villas (Cuba))" >Albernas-Carvajal, Yailet; Marta Abreu de las Villas (Cuba))" data-affiliation=" (Departamento de Ingeniería Química. Facultad de Química y Farmacia. Universidad Central Marta Abreu de las Villas (Cuba))" >Pedraza-Garciga, Julio; Marta Abreu de las Villas (Cuba))" data-affiliation=" (Departamento de Ingeniería Química. Facultad de Química y Farmacia. Universidad Central Marta Abreu de las Villas (Cuba))" >Morales-Zamora, Marlen

2017-01-01

The uncertainty has a great impact in the investment decisions, operability of the plants and in the feasibility of integration opportunities in the chemical processes. This paper, presents the steps to consider the optimization of process investment in the processes integration under conditions of uncertainty. It is shown the potentialities of the biomass cane of sugar for the integration with several plants in a biorefinery scheme for the obtaining chemical products, thermal and electric energy. Among the factories with potentialities for this integration are the pulp and paper and sugar factories and other derivative processes. Theses factories have common resources and also have a variety of products that can be exchange between them so certain products generated in a one of them can be raw matter in another plant. The methodology developed guide to obtaining of feasible investment projects under uncertainty. As objective function was considered the maximization of net profitable value in different scenarios that are generated from the integration scheme. (author)

Design and Analysis of Offshore Macroalgae Biorefineries.

Science.gov (United States)

Golberg, Alexander; Liberzon, Alexander; Vitkin, Edward; Yakhini, Zohar

2018-03-15

Displacing fossil fuels and their derivatives with renewables, and increasing sustainable food production are among the major challenges facing the world in the coming decades. A possible, sustainable direction for addressing this challenge is the production of biomass and the conversion of this biomass to the required products through a complex system coined biorefinery. Terrestrial biomass and microalgae are possible sources; however, concerns over net energy balance, potable water use, environmental hazards, and uncertainty in the processing technologies raise questions regarding their actual potential to meet the anticipated food, feed, and energy challenges in a sustainable way. Alternative sustainable sources for biorefineries are macroalgae grown and processed offshore. However, implementation of the offshore biorefineries requires detailed analysis of their technological, economic, and environmental performance. In this chapter, the basic principles of marine biorefineries design are shown. The methods to integrate thermodynamic efficiency, investment, and environmental aspects are discussed. The performance improvement by development of new cultivation methods that fit macroalgae physiology and development of new fermentation methods that address macroalgae unique chemical composition is shown.

Novel renewable products for biorefineries

Science.gov (United States)

A biorefinery integrates unit operations to convert biomass into a variety of biobased products, including fuels, chemicals, energy, and feed. Government policy initiatives over the last 1-2 decades have emphasized the production of biobased fuels, and consequently the number of dry-grind ethanol bi...

Strategy and design of Innovation Policy Road Mapping for a waste biorefinery.

Science.gov (United States)

Rama Mohan, S

2016-09-01

Looming energy crisis, climate change concerns coupled with decreasing fossil fuel resources has garnered significant global attention toward development of alternative, renewable, carbon-neutral and eco-friendly fuels to fulfil burgeoning energy demands. Waste utilization and its management are being pursued with renewed interest due to the gamut of biobased products it can offer apart from providing enough energy to meet a major fraction of the world's energy demand. Biorefining is the sustainable processing of biomass into a spectrum of marketable products and energy. Integrating all components of waste treatment culminating into biobased products and energy recovery in a single integrated waste biorefinery is self sufficient, highly sustainable and is very beneficial. Designing systematic innovation policies are essential for development and commercialization of new technologies in this important futuristic research area. This communication explores Innovation Policy Road Mapping (IPRM) methodology available in the literature and applies it to design integrated waste biorefinery. Copyright © 2016 Elsevier Ltd. All rights reserved.

Waste Biorefinery: A New Paradigm for a Sustainable Bioelectro Economy.

Science.gov (United States)

Mohan, S Venkata; Butti, Sai Kishore; Amulya, K; Dahiya, Shikha; Modestra, J Annie

2016-11-01

A waste biorefinery is a means to valorize waste as a renewable feedstock to recover biobased materials and energy through sustainable biotechnology. This approach holistically integrates remediation and resource recovery. Here we discuss the various technologies employable to construct a waste biorefinery platform and its place in a biobased economy. Copyright © 2016 Elsevier Ltd. All rights reserved.

Biorefineries: from concepts to reality?

Energy Technology Data Exchange (ETDEWEB)

Wagemann, K. [DECHEMA e.V., Frankfurt am Main (Germany)

2007-07-01

The concept of biorefineries addresses the conversion of plant biomass to fuels, materials and chemicals, waste streams being minimized and used for the production of electricity and heat. Four different types are presently discussed: - Sugar-based biorefineries - Whole-crop biorefineries - Green biorefineries - Lignocellulose biorefineries Besides the lack of existing technical solutions and limited land resources, competition with food production and, as a consequence, rising raw material prices considered. (orig.)

Economic Analysis of an Integrated Annatto Seeds-Sugarcane Biorefinery Using Supercritical CO2 Extraction as a First Step

Directory of Open Access Journals (Sweden)

Juliana Q. Albarelli

2016-06-01

Full Text Available Recently, supercritical fluid extraction (SFE has been indicated to be utilized as part of a biorefinery, rather than as a stand-alone technology, since besides extracting added value compounds selectively it has been shown to have a positive effect on the downstream processing of biomass. To this extent, this work evaluates economically the encouraging experimental results regarding the use of SFE during annatto seeds valorization. Additionally, other features were discussed such as the benefits of enhancing the bioactive compounds concentration through physical processes and of integrating the proposed annatto seeds biorefinery to a hypothetical sugarcane biorefinery, which produces its essential inputs, e.g., CO2, ethanol, heat and electricity. For this, first, different configurations were modeled and simulated using the commercial simulator Aspen Plus® to determine the mass and energy balances. Next, each configuration was economically assessed using MATLAB. SFE proved to be decisive to the economic feasibility of the proposed annatto seeds-sugarcane biorefinery concept. SFE pretreatment associated with sequential fine particles separation process enabled higher bixin-rich extract production using low-pressure solvent extraction method employing ethanol, meanwhile tocotrienols-rich extract is obtained as a first product. Nevertheless, the economic evaluation showed that increasing tocotrienols-rich extract production has a more pronounced positive impact on the economic viability of the concept.

Integrated torrefaction vs. external torrefaction - A thermodynamic analysis for the case of a thermochemical biorefinery

DEFF Research Database (Denmark)

Clausen, Lasse Røngaard

2014-01-01

Integrated and external torrefaction is analyzed and compared via thermodynamic modeling. In this paper, integrated torrefaction is defined as torrefaction integrated with entrained flow gasification. External torrefaction is defined as the decentralized production of torrefied wood pellets...... and centralized conversion of the pellets by entrained flow gasification. First, the syngas production of the two methods was compared. Second, the two methods were compared by considering complete biorefineries with either integrated torrefaction or external torrefaction. The first part of the analysis showed...... from external torrefaction to integrated torrefaction. The costs of this increase in energy efficiency are as follows: 1) more difficult transport, storage and handling of the biomass feedstock (wood chips vs. torrefied wood pellets); 2) reduced plant size; 3) no net electricity production; and 4...

Unconventional biomasses as feedstocks for production of biofuels and succinic acid in a biorefinery concept

DEFF Research Database (Denmark)

Gunnarsson, Ingólfur Bragi

composition of the specific biomass feedstock, as well as which pretreatment, saccharification, fermentation and extraction techniques are used. Furthermore, integrating biological processes into the biorefinery that effectively consume CO2 will become increasingly important. Such process integration could...... significantly improve the sustainability indicators of the overall biorefinery process. In this study, unconventional lignocellulosic- and aquatic biomasses were investigated as biorefinery feedstocks. The studied biomasses were Jerusalem artichoke, industrial hemp and macroalgae species Laminaria digitata....... The chemical composition of biomasses was determined in order to demonstrate their biorefinery potential. Bioethanol and biogas along with succinic acid production were the explored bioconversion routes, while potential production of other compounds was also investigated. Differences and changes in biomass...

Integrated production of cellulosic bioethanol and succinic acid from industrial hemp in a biorefinery concept.

Science.gov (United States)

Kuglarz, Mariusz; Alvarado-Morales, Merlin; Karakashev, Dimitar; Angelidaki, Irini

2016-01-01

The aim of this study was to develop integrated biofuel (cellulosic bioethanol) and biochemical (succinic acid) production from industrial hemp (Cannabis sativa L.) in a biorefinery concept. Two types of pretreatments were studied (dilute-acid and alkaline oxidative method). High cellulose recovery (>95%) as well as significant hemicelluloses solubilization (49-59%) after acid-based method and lignin solubilization (35-41%) after alkaline H2O2 method were registered. Alkaline pretreatment showed to be superior over the acid-based method with respect to the rate of enzymatic hydrolysis and ethanol productivity. With respect to succinic acid production, the highest productivity was obtained after liquid fraction fermentation originated from steam treatment with 1.5% of acid. The mass balance calculations clearly showed that 149kg of EtOH and 115kg of succinic acid can be obtained per 1ton of dry hemp. Results obtained in this study clearly document the potential of industrial hemp for a biorefinery. Copyright © 2015 Elsevier Ltd. All rights reserved.

Biorefineries: A Short Introduction.

Science.gov (United States)

Wagemann, Kurt; Tippkötter, Nils

2018-04-13

The terms bioeconomy and biorefineries are used for a variety of processes and developments. This short introduction is intended to provide a delimitation and clarification of the terminology as well as a classification of current biorefinery concepts. The basic process diagrams of the most important biorefinery types are shown.

Conceptual design of sustainable integrated microalgae biorefineries: Parametric analysis of energy use, greenhouse gas emissions and techno-economics

NARCIS (Netherlands)

Posada, John; Brentner, Laura; Ramirez, Andrea; Patel, Martin

2016-01-01

This study covers four main aspects of the conceptual design of sustainable integrated microalgae-based biorefineries using flue gas from CO2-intensive industries (i.e. 100% CO2): i) screening of technologies (4 options for cultivation, 3 for culture dewatering, 3 for cell disruption, 4 for lipids

Conceptual design of sustainable integrated microalgae biorefineries : Parametric analysis of energy use, greenhouse gas emissions and techno-economics

NARCIS (Netherlands)

Posada Duque, J.A.; Brentner, L.B.; Ramirez, A; Patel, MK

2016-01-01

This study covers four main aspects of the conceptual design of sustainable integrated microalgae-based biorefineries using flue gas from CO2-intensive industries (i.e. 100% CO2): i) screening of technologies (4 options for cultivation, 3 for culture dewatering, 3 for cell disruption, 4 for lipids

Conceptual design of sustainable integrated microalgae biorefineries: Parametric analysis of energy use, greenhouse gas emissions and techno-economics

NARCIS (Netherlands)

Posada, John A.; Brentner, Laura B.; Ramirez, Andrea; Patel, Martin K.

This study covers four main aspects of the conceptual design of sustainable integrated microalgae-based biorefineries using flue gas from CO2-intensive industries (i.e. 100% CO2): i) screening of technologies (4 options for cultivation, 3 for culture dewatering, 3 for cell disruption, 4 for lipids

Forest biorefinery : the next century of innovation

Science.gov (United States)

Junyong Zhu

2011-01-01

The concept of producing cel¬lulosic biofuel, bioproducts, and chemicals using ligno¬celluloses in a biorefinery has been around for over a century. Renewed interest in the biorefinery concept has more recently arisen from concerns about climate change and the depletion of fossil fuels. Much research and progress has been made in the last three decades in the area of...

To The Biorefinery: Delivered Forestland and Agricultural Resources

Energy Technology Data Exchange (ETDEWEB)

None

2016-06-01

It can be challenging and costly to transport biomass feedstock supplies from the roadside, or farmgate, to a biorefinery. Given the geographic dispersion and lowbulk density of cellulosic feedstocks, cost effective scaling of commercial biorefinery operations requires overcoming many challenges. The Biomass Research and Development Board’s Feedstock Logistics Interagency Working Group identified four primary barriers related to biorefinery commercialization: • Capacity and efficiency of harvest and collection equipment • High-moisture content leading to degradation of biomass • Variable biomass quality upon arrival at the biorefinery • Costly transportation options.1 Further, feedstock supply systems do not currently mitigate risks such as low crop yield, fire, or competition for resource use. Delivery and preprocessing improvements will allow for the development of a commercial-scale bioenergy industry that achieves national production and cost targets.

A New Proposal Of Cellulosic Ethanol To Boost Sugarcane Biorefineries: Techno-economic Evaluation

OpenAIRE

Albarelli J.Q.; Ensinas A.V.; Silva M.A.

2014-01-01

Commercial simulator Aspen Plus was used to simulate a biorefinery producing ethanol from sugarcane juice and second generation ethanol production using bagasse fine fraction composed of parenchyma cells (P-fraction). Liquid hot water and steam explosion pretreatment technologies were evaluated. The processes were thermal and water integrated and compared to a biorefinery producing ethanol from juice and sugarcane bagasse. The results indicated that after thermal and water integration, the ev...

Environmental impacts of producing bioethanol and biobased lactic acid from standalone and integrated biorefineries using a consequential and an attributional life cycle assessment approach.

Science.gov (United States)

Parajuli, Ranjan; Knudsen, Marie Trydeman; Birkved, Morten; Djomo, Sylvestre Njakou; Corona, Andrea; Dalgaard, Tommy

2017-11-15

This study evaluates the environmental impacts of biorefinery products using consequential (CLCA) and attributional (ALCA) life cycle assessment (LCA) approaches. Within ALCA, economic allocation method was used to distribute impacts among the main products and the coproducts, whereas within the CLCA system expansion was adopted to avoid allocation. The study seeks to answer the questions (i) what is the environmental impacts of process integration?, and (ii) do CLCA and ALCA lead to different conclusions when applied to biorefinery?. Three biorefinery systems were evaluated and compared: a standalone system producing bioethanol from winter wheat-straw (system A), a standalone system producing biobased lactic acid from alfalfa (system B), and an integrated biorefinery system (system C) combining the two standalone systems and producing both bioethanol and lactic acid. The synergy of the integration was the exchange of useful energy necessary for biomass processing in the two standalone systems. The systems were compared against a common reference flow: "1MJ EtOH +1kg LA ", which was set on the basis of products delivered by the system C. Function of the reference flow was to provide service of both fuel (bioethanol) at 99.9% concentration (wt. basis) and biochemical (biobased lactic acid) in food industries at 90% purity; both products delivered at biorefinery gate. The environmental impacts of interest were global warming potential (GWP 100 ), eutrophication potential (EP), non-renewable energy (NRE) use and the agricultural land occupation (ALO). Regardless of the LCA approach adopted, system C performed better in most of the impact categories than both standalone systems. The process wise contribution to the obtained environmental impacts also showed similar impact pattern in both approaches. The study also highlighted that the recirculation of intermediate materials, e.g. C 5 sugar to boost bioethanol yield and that the use of residual streams in the energy

Food waste biorefinery: Sustainable strategy for circular bioeconomy.

Science.gov (United States)

Dahiya, Shikha; Kumar, A Naresh; Shanthi Sravan, J; Chatterjee, Sulogna; Sarkar, Omprakash; Mohan, S Venkata

2018-01-01

Enormous quantity of food waste (FW) is becoming a global concern. To address this persistent problem, sustainable interventions with green technologies are essential. FW can be used as potential feedstock in biological processes for the generation of various biobased products along with its remediation. Enabling bioprocesses like acidogenesis, fermentation, methanogenesis, solventogenesis, photosynthesis, oleaginous process, bio-electrogenesis, etc., that yields various products like biofuels, platform chemicals, bioelectricity, biomaterial, biofertilizers, animal feed, etc can be utilized for FW valorisation. Integrating these bioprocesses further enhances the process efficiency and resource recovery sustainably. Adapting biorefinery strategy with integrated approach can lead to the development of circular bioeconomy. The present review highlights the various enabling bioprocesses that can be employed for the generation of energy and various commodity chemicals in an integrated approach addressing sustainability. The waste biorefinery approach for FW needs optimization of the cascade of the individual bioprocesses for the transformation of linear economy to circular bioeconomy. Copyright © 2017 Elsevier Ltd. All rights reserved.

Carbon Sources for Polyhydroxyalkanoates and an Integrated Biorefinery

Directory of Open Access Journals (Sweden)

Guozhan Jiang

2016-07-01

Full Text Available Polyhydroxyalkanoates (PHAs are a group of bioplastics that have a wide range of applications. Extensive progress has been made in our understanding of PHAs’ biosynthesis, and currently, it is possible to engineer bacterial strains to produce PHAs with desired properties. The substrates for the fermentative production of PHAs are primarily derived from food-based carbon sources, raising concerns over the sustainability of their production in terms of their impact on food prices. This paper gives an overview of the current carbon sources used for PHA production and the methods used to transform these sources into fermentable forms. This allows us to identify the opportunities and restraints linked to future sustainable PHA production. Hemicellulose hydrolysates and crude glycerol are identified as two promising carbon sources for a sustainable production of PHAs. Hemicellulose hydrolysates and crude glycerol can be produced on a large scale during various second generation biofuels’ production. An integration of PHA production within a modern biorefinery is therefore proposed to produce biofuels and bioplastics simultaneously. This will create the potential to offset the production cost of biofuels and reduce the overall production cost of PHAs.

Carbon Sources for Polyhydroxyalkanoates and an Integrated Biorefinery.

Science.gov (United States)

Jiang, Guozhan; Hill, David J; Kowalczuk, Marek; Johnston, Brian; Adamus, Grazyna; Irorere, Victor; Radecka, Iza

2016-07-19

Polyhydroxyalkanoates (PHAs) are a group of bioplastics that have a wide range of applications. Extensive progress has been made in our understanding of PHAs' biosynthesis, and currently, it is possible to engineer bacterial strains to produce PHAs with desired properties. The substrates for the fermentative production of PHAs are primarily derived from food-based carbon sources, raising concerns over the sustainability of their production in terms of their impact on food prices. This paper gives an overview of the current carbon sources used for PHA production and the methods used to transform these sources into fermentable forms. This allows us to identify the opportunities and restraints linked to future sustainable PHA production. Hemicellulose hydrolysates and crude glycerol are identified as two promising carbon sources for a sustainable production of PHAs. Hemicellulose hydrolysates and crude glycerol can be produced on a large scale during various second generation biofuels' production. An integration of PHA production within a modern biorefinery is therefore proposed to produce biofuels and bioplastics simultaneously. This will create the potential to offset the production cost of biofuels and reduce the overall production cost of PHAs.

Biorefinery plant design, engineering and process optimisation

DEFF Research Database (Denmark)

Holm-Nielsen, Jens Bo; Ehimen, Ehiazesebhor Augustine

2014-01-01

Before new biorefinery systems can be implemented, or the modification of existing single product biomass processing units into biorefineries can be carried out, proper planning of the intended biorefinery scheme must be performed initially. This chapter outlines design and synthesis approaches...... applicable for the planning and upgrading of intended biorefinery systems, and includes discussions on the operation of an existing lignocellulosic-based biorefinery platform. Furthermore, technical considerations and tools (i.e., process analytical tools) which could be applied to optimise the operations...... of existing and potential biorefinery plants are elucidated....

Assessment of a novel alder biorefinery concept to meet demands of economic feasibility, energy production and long term environmental sustainability

DEFF Research Database (Denmark)

Thomsen, Tobias; Ahrenfeldt, Jesper; Thomsen, Sune Tjalfe

2013-01-01

A biorefinery concept based on alder tree plantations on degenerated soil is developed to comply with indicators of economic feasibility, fossil fuel depletion concerns, and long term sustainability issues. The potential performance of feedstock and biorefinery has been assessed through a literat......A biorefinery concept based on alder tree plantations on degenerated soil is developed to comply with indicators of economic feasibility, fossil fuel depletion concerns, and long term sustainability issues. The potential performance of feedstock and biorefinery has been assessed through...... degenerated soils. Integrating a biomass handling system, an LTCFB gasifier, a diarylheptanoids production chain, an anaerobic digestion facility, a slow pyrolysis unit, gas upgrading and various system integration units, the biorefinery could obtain the following production characteristics accounted...

Algal biorefinery-based industry: an approach to address fuel and food insecurity for a carbon-smart world.

Science.gov (United States)

Subhadra, Bobban

2011-01-15

Food and fuel production are intricately interconnected. In a carbon-smart society, it is imperative to produce both food and fuel sustainably. Integration of the emerging biorefinery concept with other industries can bring many environmental deliverables while mitigating several sustainability-related issues with respect to greenhouse gas emissions, fossil fuel usage, land use change for fuel production and future food insufficiency. A new biorefinery-based integrated industrial ecology encompasses the different value chain of products, coproducts, and services from the biorefinery industries. This paper discusses a framework to integrate the algal biofuel-based biorefinery, a booming biofuel sector, with other industries such as livestock, lignocellulosic and aquaculture. Using the USA as an example, this paper also illustrates the benefits associated with sustainable production of fuel and food. Policy and regulatory initiatives for synergistic development of the algal biofuel sector with other industries can bring many sustainable solutions for the future existence of mankind. Copyright © 2010 Society of Chemical Industry.

Biorefinery Sustainability Analysis

DEFF Research Database (Denmark)

J. S. M. Silva, Carla; Prunescu, Remus Mihail; Gernaey, Krist

2017-01-01

This chapter deals with sustainability analysis of biorefinery systems in terms of environmental and socio-economic indicators . Life cycle analysis has methodological issues related to the functional unit (FU), allocation , land use and biogenic carbon neutrality of the reference system and of t......This chapter deals with sustainability analysis of biorefinery systems in terms of environmental and socio-economic indicators . Life cycle analysis has methodological issues related to the functional unit (FU), allocation , land use and biogenic carbon neutrality of the reference system...... and of the biorefinery-based system. Socio-economic criteria and indicators used in sustainability frameworks assessment are presented and discussed. There is not one single methodology that can aptly cover the synergies of environmental, economic, social and governance issues required to assess the sustainable...

Biological processes for advancing lignocellulosic waste biorefinery by advocating circular economy.

Science.gov (United States)

Liguori, Rossana; Faraco, Vincenza

2016-09-01

The actualization of a circular economy through the use of lignocellulosic wastes as renewable resources can lead to reduce the dependence from fossil-based resources and contribute to a sustainable waste management. The integrated biorefineries, exploiting the overall lignocellulosic waste components to generate fuels, chemicals and energy, are the pillar of the circular economy. The biological treatment is receiving great attention for the biorefinery development since it is considered an eco-friendly alternative to the physico-chemical strategies to increase the biobased product recovery from wastes and improve saccharification and fermentation yields. This paper reviews the last advances in the biological treatments aimed at upgrading lignocellulosic wastes, implementing the biorefinery concept and advocating circular economy. Copyright © 2016 Elsevier Ltd. All rights reserved.

Synthesis and design of optimal biorefinery

DEFF Research Database (Denmark)

Cheali, Peam

analysed to enable risk-aware decision making. Theapplication of the developed analysis and decision support toolbox is highlightedthrough relevant biorefinery case studies: bioethanol, biogasoline or biodiesel production; algal biorefinery; and bioethanol-upgrading concepts are presented. This development...... environment. These challenges motivate thedevelopment of sustainable technologies for processing renewable feedstock for the production of fuels, chemicals and materials in what is commonly known as a biorefinery. The biorefinery concept is a term to describe one or more processes whichproduce various...... products from bio-based feedstock. Since there are several bio-basedfeedstock sources, this has motivated development of different conversion concepts producing various desired products. This results in a number of challenges for the synthesis and design of the optimal biorefinery concept at the early...

Sustainability assessment of sugarcane biorefinery and molasses ethanol production in Thailand using eco-efficiency indicator

International Nuclear Information System (INIS)

Silalertruksa, Thapat; Gheewala, Shabbir H.; Pongpat, Patcharaporn

2015-01-01

Highlights: • Sugarcane biorefinery in Thailand is evaluated using the eco-efficiency concept. • Green cane along with cane trash use for electricity yields highest eco-efficiency. • Proposed biorefinery system increases eco-efficiency by 20–70%. - Abstract: The study aims to evaluate the sugarcane biorefinery and molasses ethanol production in Thailand using the combined environmental and economic sustainability indicator, so called “Eco-efficiency”. Four sugarcane biorefinery scenarios in Thailand are evaluated. The total output values (US$) and the life cycle greenhouse gas (GHG) emissions (kg CO_2eq) are selected as the indicators for characterizing economic and environmental performance, respectively. The results show that the biorefinery system of mechanized farming along with cane trash utilization for power generation yields the highest eco-efficiency. The benefits come from the increased value added of the biorefinery together with the decreased GHG emissions of the biorefinery system. As compared to the base case scenario, the new systems proposed result in the eco-efficiency improvement by around 20–70%. The biorefinery concept induces reduction of GHG emissions attributed to molasses ethanol. Green cane production and harvesting results in further lowering of the GHG emissions. Integration of sugarcane biomass utilization across the entire sugarcane complex would enhance the sustainability of the sugarcane production system.

Towards integrated biorefinery from dried distillers grains: Selective extraction of pentoses using dilute acid hydrolysis

International Nuclear Information System (INIS)

Fonseca, Dania A.; Lupitskyy, Robert; Timmons, David; Gupta, Mayank; Satyavolu, Jagannadh

2014-01-01

The abundant availability and high level of hemicellulose content make dried distillers grains (DDG) an attractive feedstock for production of pentoses (C5) and conversion of C5 to bioproducts. One target of this work was to produce a C5 extract (hydrolyzate) with high yield and purity with a low concentration of C5 degradation products. A high selectivity towards pentoses was achieved using dilute acid hydrolysis of DDG in a percolation reactor with liquid recirculation. Pretreatment of starting material using screening and ultrasonication resulted in fractional increase of the pentose yield by 42%. A 94% yield of pentoses on the DDG (280.9 g kg −1 ) was obtained. Selective extraction of individual pentoses has been achieved by using a 2-stage hydrolysis process, resulting in arabinose-rich (arabinose 81.5%) and xylose-rich (xylose 85.2%) streams. A broader impact of this work is towards an Integrated Bio-Refinery based on DDG – for production of biofuels, biochemical intermediates, and other bioproducts. - Highlights: • A process for selective extraction of pentoses from DDG was presented as a part of integrated biorefinery approach. • The selectivity for pentoses was high using dilute acid hydrolysis in a percolation reactor with liquid recirculation. • Pretreatment of DDG using screening and ultrasonication resulted in fractional increase of the pentose yield by 42 %. • A 94% yield in pentoses (280.9 g kg −1 of DDG) was obtained. • A 2-stage hydrolysis process, developed to extract individual pentoses, resulted in arabinose and xylose rich streams

Chemistry in forest biorefineries II - BIORAFF II

Energy Technology Data Exchange (ETDEWEB)

Hupa, M. (Aabo Akademi, Turku (Finland). Process Chemistry Centre), Email: mhupa@abo.fi; Auer, M. (Aabo Akademi, Turku (Finland). Process Chemistry Centre), Email: mauer@abo.fi

2010-10-15

The biorefinery concept may be compared to an oil refinery and petrochemical plant, where fuels and numerous intermediates are produced for further processing into high-value and speciality materials. In biorefineries, the raw material instead of mineral oil is biobased material. Biorefinery development at the US and European level mostly covers the use of annual crops and other bio-based materials. However, in this project focus is on non-food materials primarily in industrial pulp and paper processes and this project is limited to forest-based biorefineries. The aim of the project is also to preserve the molecular structures created by the nature as much as possible, to explore new separation and purification methods and look at new applications in the areas such as: functional food, nutritional additives, functional additives in paper making, antioxidants, new biobased materials and biobased energy. As the area, in spite of efforts to limit it, is very large, we have selected to focus on a limited number of concretised projects, which to our knowledge are complementary with other efforts for promoting biorefinery concepts. As highlights about promising results are studies on extraction of wood and derivatisations of hemicelluloses. The goals here are twofold; we are looking for the additional functionalities for hemicelluloses and searching for new applications. Hemicelluloses in many applications would benefit from the modification of the structure, especially to improve compatibility and solubility in some applications. Research on metals in trees and fuels, release of elements in combustion, pyrolysis and sorption studies have produced new knowledge. (orig.)

Chemistry in forest biorefineries II - BIORAFF II

Energy Technology Data Exchange (ETDEWEB)

Hupa, M.; Auer, M. (Aabo Akademi University, Turku (Finland), Process Chemistry Centre), e-mail: mhupa@abo.fi, e-mail: mauer@abo.fi

2011-11-15

The biorefinery concept may be compared to an oil refinery and petrochemical plant, where fuels and numerous intermediates are produced for further processing into high-value and speciality materials. In biorefineries, the raw material instead of mineral oil is bio-based material. Biorefinery development at the US and European level mostly covers the use of annual crops and other bio-based materials. However, in this project focus is on non-food materials primarily in industrial pulp and paper processes and this project is limited to forest-based biorefineries. The aim of the project is also to preserve the molecular structures created by the nature as much as possible, to explore new separation and purification methods and look at new applications in the areas such as: functional food, nutritional additives, functional additives in paper making, antioxidants, new biobased materials and biobased energy. As the area, in spite of efforts to limit it, is very large, we have selected to focus on a limited number of concretised projects, which to our knowledge are complementary with other efforts for promoting biorefinery concepts. As highlights about promising results are studies on extraction of wood and derivatisations of hemicelluloses. The goals here are twofold; we are looking for the additional functionalities for hemicelluloses and search of new applications. Hemicelluloses in many applications would benefit from the modification of the structure, especially to improve compatibility and solubility in some applications. Research on metals in trees and fuels, release of elements in combustion, pyrolysis and sorption studies have produced new knowledge. (orig.)

The pros and cons of lignin valorisation in an integrated biorefinery

NARCIS (Netherlands)

Strassberger, Z.; Tanase, S.; Rothenberg, G.

2014-01-01

This short critical review outlines possible scenarios for using lignin as a feedstock in a biorefinery environment. We first explain the position of biomass with respect to fossil carbon sources and the possibilities of substituting these in tomorrow's transportation fuels, energy, and chemicals

Sugarcane biorefineries: Case studies applied to the Brazilian sugar–alcohol industry

International Nuclear Information System (INIS)

Renó, Maria Luiza Grillo; Olmo, Oscar Almazán del; Palacio, José Carlos Escobar; Lora, Electo Eduardo Silva; Venturini, Osvaldo José

2014-01-01

Highlights: • Advanced system of co-generation improves the energy performance of biorefineries. • Sugarcane straw as additional source of fuel in the biorefinery resulted positive. • The farming and transport of sugarcane cause the main environmental impacts. - Abstract: The use of biomasses is becoming increasingly appealing alternative, to give an partial solution lack of energy, with an ecofriendly approach, having on sugarcane a solid fundament; that receives the new and valuable complement of the innovative concept of the biorefineries it is productive installations, that can be summarized as to reach the higher overall yield from the raw materials, with the lowest environmental impact, at minimum energy input and giving the maximum of the energy output. The biorefinery is the true valuable option of a wide diversification, with by-products like the single cell protein and biogas from the distillery vinasse, new oxidants like methanol, second generation biofuels, biobutanol, etc. In this context this paper presents a study of five different configurations of biorefineries. Each case study being a system based on an autonomous distillery or sugar mill with an annexed distillery and coproduction of methanol from bagasse. The paper includes the use of sugarcane harvest residues (mainly straw) and a BIG–GT plant (Biomass Integrated Gasification–Gas Turbine) as alternatives to fulfill the energy demands of the complex

Environmental impacts of producing bioethanol and biobased lactic acid from standalone and integrated biorefineries using a consequential and an attributional life cycle assessment approach

DEFF Research Database (Denmark)

Parajuli, Ranjan; Knudsen, Marie Trydeman; Birkved, Morten

2017-01-01

: a standalone system producing bioethanol from winter wheat-straw (system A), a standalone system producing biobased lactic acid from alfalfa (system B), and an integrated biorefinery system (system C) combining the two standalone systems and producing both bioethanol and lactic acid. The synergy...

University of Maine Integrated Forest Product Refinery (IFPR) Technology Research

Energy Technology Data Exchange (ETDEWEB)

Pendse, Hemant P.

2010-11-23

This project supported research on science and technology that forms a basis for integrated forest product refinery for co-production of chemicals, fuels and materials using existing forest products industry infrastructure. Clear systems view of an Integrated Forest Product Refinery (IFPR) allowed development of a compelling business case for a small scale technology demonstration in Old Town ME for co-production of biofuels using cellulosic sugars along with pulp for the new owners of the facility resulting in an active project on Integrated Bio-Refinery (IBR) at the Old Town Fuel & Fiber. Work on production of advanced materials from woody biomass has led to active projects in bioplastics and carbon nanofibers. A lease for 40,000 sq. ft. high-bay space has been obtained to establish a Technology Research Center for IFPR technology validation on industrially relevant scale. UMaine forest bioproducts research initiative that began in April 2006 has led to establishment of a formal research institute beginning in March 2010.

Early‐Stage Capital Cost Estimation of Biorefinery Processes: A Comparative Study of Heuristic Techniques

Science.gov (United States)

Couturier, Jean‐Luc; Kokossis, Antonis; Dubois, Jean‐Luc

2016-01-01

Abstract Biorefineries offer a promising alternative to fossil‐based processing industries and have undergone rapid development in recent years. Limited financial resources and stringent company budgets necessitate quick capital estimation of pioneering biorefinery projects at the early stages of their conception to screen process alternatives, decide on project viability, and allocate resources to the most promising cases. Biorefineries are capital‐intensive projects that involve state‐of‐the‐art technologies for which there is no prior experience or sufficient historical data. This work reviews existing rapid cost estimation practices, which can be used by researchers with no previous cost estimating experience. It also comprises a comparative study of six cost methods on three well‐documented biorefinery processes to evaluate their accuracy and precision. The results illustrate discrepancies among the methods because their extrapolation on biorefinery data often violates inherent assumptions. This study recommends the most appropriate rapid cost methods and urges the development of an improved early‐stage capital cost estimation tool suitable for biorefinery processes. PMID:27484398

A methodology to assess the contribution of biorefineries to a sustainable bio-based economy

International Nuclear Information System (INIS)

Maga, Daniel

2015-01-01

Within this thesis for the first time an integrative methodology to assess the sustainability of biorefineries and bio-based products has been developed which is based on a fundamental understanding of sustainability as presented in the Brundtland report. The applied integrative concept of sustainability as developed by the Institute for Technology Assessment and Systems Analysis (ITAS) overcomes the widespread thinking in three pillars of sustainability and opens up new perspectives. The methodology developed addresses innovative life cycle assessment evaluation methods on midpoint level as well as on the area of protection and adopts state-of-the-art assessment procedures e.g. to determine water deprivation. It goes far beyond the scope of conventional LCA studies and examines effects on human health, on the environment, on the development of knowledge and physical capital, and on regional development and acceptance. In order to validate the developed method it was applied to an algae biorefinery currently under development and construction in the south of Spain. For this assessment for the first time extensive process data was collected of a real algae biorefinery which uses municipal waste water as a culture medium for microalgae. The use of waste water allows to reduce the demand for fresh water and avoids additional fertilisation of microalgae. Moreover, the analysed algae biorefinery replaces conventional waste water treatment by a biological purification and produces biogas by an anaerobic pretreatment of waste water as well as by anaerobic digestion of algae. After several purification steps the biogas can be used as automotive fuel and thus contributes to further development and increased use of biofuels. On the one hand the sustainability assessment shows that this way of waste water treatment contributes to climate protection and to the conservation of fossil energy carrier. On the other hand approximately ten times more land is needed and twenty times

A methodology to assess the contribution of biorefineries to a sustainable bio-based economy

Energy Technology Data Exchange (ETDEWEB)

Maga, Daniel

2015-07-01

Within this thesis for the first time an integrative methodology to assess the sustainability of biorefineries and bio-based products has been developed which is based on a fundamental understanding of sustainability as presented in the Brundtland report. The applied integrative concept of sustainability as developed by the Institute for Technology Assessment and Systems Analysis (ITAS) overcomes the widespread thinking in three pillars of sustainability and opens up new perspectives. The methodology developed addresses innovative life cycle assessment evaluation methods on midpoint level as well as on the area of protection and adopts state-of-the-art assessment procedures e.g. to determine water deprivation. It goes far beyond the scope of conventional LCA studies and examines effects on human health, on the environment, on the development of knowledge and physical capital, and on regional development and acceptance. In order to validate the developed method it was applied to an algae biorefinery currently under development and construction in the south of Spain. For this assessment for the first time extensive process data was collected of a real algae biorefinery which uses municipal waste water as a culture medium for microalgae. The use of waste water allows to reduce the demand for fresh water and avoids additional fertilisation of microalgae. Moreover, the analysed algae biorefinery replaces conventional waste water treatment by a biological purification and produces biogas by an anaerobic pretreatment of waste water as well as by anaerobic digestion of algae. After several purification steps the biogas can be used as automotive fuel and thus contributes to further development and increased use of biofuels. On the one hand the sustainability assessment shows that this way of waste water treatment contributes to climate protection and to the conservation of fossil energy carrier. On the other hand approximately ten times more land is needed and twenty times

Biorefineries – factories of the future

Directory of Open Access Journals (Sweden)

Kołtuniewicz Andrzej B.

2016-03-01

Full Text Available Efforts were made to demonstrate that in biorefineries it is possible to manufacture all the commodities required for maintaining human civilisation on the current level. Biorefineries are based on processing biomass resulting from photosynthesis. From sugars, oils and proteins, a variety of food, feed, nutrients, pharmaceuticals, polymers, chemicals and fuels can further be produced. Production in biorefineries must be based on a few rules to fulfil sustainable development: all raw materials are derived from biomass, all products are biodegradable and production methods are in accordance with the principles of Green Chemistry and Clean Technology. The paper presents a summary of state-of-the-art concerning biorefineries, production methods and product range of leading companies in the world that are already implemented. Potential risks caused by the development of biorefineries, such as: insecurities of food and feed production, uncontrolled changes in global production profiles, monocultures, eutrophication, etc., were also highlighted in this paper. It was stressed that the sustainable development is not only an alternative point of view but is our condition to survive.

Biorefinery systems – potential contributors to sustainable innovation

NARCIS (Netherlands)

Wellisch, M.; Jungmeier, G.; Karbowski, A.; Patel, M.K.; Rogulska, M.

2010-01-01

Sustainable biorefineries have a critical role to play in our common future. The need to provide more goods using renewable resources, combined with advances in science and technology, has provided a receptive environment for biorefinery systems development. Biorefineries offer the promise of using

Recovery Act. Demonstration of a Pilot Integrated Biorefinery for the Efficient, Direct Conversion of Biomass to Diesel Fuel

Energy Technology Data Exchange (ETDEWEB)

Schuetzle, Dennis [Renewable Energy Institute International, Sacramentao, CA (United States); Tamblyn, Greg [Renewable Energy Institute International, Sacramentao, CA (United States); Caldwell, Matt [Renewable Energy Institute International, Sacramentao, CA (United States); Hanbury, Orion [Renewable Energy Institute International, Sacramentao, CA (United States); Schuetzle, Robert [Greyrock Energy, Sacramento, CA (United States); Rodriguez, Ramer [Greyrock Energy, Sacramento, CA (United States); Johnson, Alex [Red Lion Bio-Energy, Toledo, OH (United States); Deichert, Fred [Red Lion Bio-Energy, Toledo, OH (United States); Jorgensen, Roger [Red Lion Bio-Energy, Toledo, OH (United States); Struble, Doug [Red Lion Bio-Energy, Toledo, OH (United States)

2015-05-12

The Renewable Energy Institute International, in collaboration with Greyrock Energy and Red Lion Bio-Energy (RLB) has successfully demonstrated operation of a 25 ton per day (tpd) nameplate capacity, pilot, pre-commercial-scale integrated biorefinery (IBR) plant for the direct production of premium, “drop-in”, synthetic fuels from agriculture and forest waste feedstocks using next-generation thermochemical and catalytic conversion technologies. The IBR plant was built and tested at the Energy Center, which is located in the University of Toledo Medical Campus in Toledo, Ohio.

Recent advances in yeast cell-surface display technologies for waste biorefineries.

Science.gov (United States)

Liu, Zhuo; Ho, Shih-Hsin; Hasunuma, Tomohisa; Chang, Jo-Shu; Ren, Nan-Qi; Kondo, Akihiko

2016-09-01

Waste biorefinery aims to maximize the output of value-added products from various artificial/agricultural wastes by using integrated bioprocesses. To make waste biorefinery economically feasible, it is thus necessary to develop a low-cost, environment-friendly technique to perform simultaneous biodegradation and bioconversion of waste materials. Cell-surface display engineering is a novel, cost-effective technique that can auto-immobilize proteins on the cell exterior of microorganisms, and has been applied for use with waste biofinery. Through tethering different enzymes (e.g., cellulase, lipase, and protease) or metal-binding peptides on cell surfaces, various yeast strains can effectively produce biofuels and biochemicals from sugar/protein-rich waste materials, catalyze waste oils into biodiesels, or retrieve heavy metals from wastewater. This review critically summarizes recent applications of yeast cell-surface display on various types of waste biorefineries, highlighting its potential and future challenges with regard to commercializing this technology. Copyright © 2016 Elsevier Ltd. All rights reserved.

Biorefineries for chemical and biofuel production

DEFF Research Database (Denmark)

Fjerbæk Søtoft, Lene

crops for biofuel production is research in biorefineries using a whole-crop approach with the aim of having an optimal use of all the components of the specific crop. Looking at rape as a model crop, the components can be used for i.e. bioethanol, biodiesel, biogas, biohydrogen, feed, food and plant...

Valorization of cereal based biorefinery byproducts: reality and expectations.

Science.gov (United States)

Elmekawy, Ahmed; Diels, Ludo; De Wever, Heleen; Pant, Deepak

2013-08-20

The growth of the biobased economy will lead to an increase in new biorefinery activities. All biorefineries face the regular challenges of efficiently and economically treating their effluent to be compatible with local discharge requirements and to minimize net water consumption. The amount of wastes resulting from biorefineries industry is exponentially growing. The valorization of such wastes has drawn considerable attention with respect to resources with an observable economic and environmental concern. This has been a promising field which shows great prospective toward byproduct usage and increasing value obtained from the biorefinery. However, full-scale realization of biorefinery wastes valorization is not straightforward because several microbiological, technological and economic challenges need to be resolved. In this review we considered valorization options for cereals based biorefineries wastes while identifying their challenges and exploring the opportunities for future process.

Recovery of agricultural nutrients from biorefineries.

Science.gov (United States)

Carey, Daniel E; Yang, Yu; McNamara, Patrick J; Mayer, Brooke K

2016-09-01

This review lays the foundation for why nutrient recovery must be a key consideration in design and operation of biorefineries and comprehensively reviews technologies that can be used to recover an array of nitrogen, phosphorus, and/or potassium-rich products of relevance to agricultural applications. Recovery of these products using combinations of physical, chemical, and biological operations will promote sustainability at biorefineries by converting low-value biomass (particularly waste material) into a portfolio of higher-value products. These products can include a natural partnering of traditional biorefinery outputs such as biofuels and chemicals together with nutrient-rich fertilizers. Nutrient recovery not only adds an additional marketable biorefinery product, but also avoids the negative consequences of eutrophication, and helps to close anthropogenic nutrient cycles, thereby providing an alternative to current unsustainable approaches to fertilizer production, which are energy-intensive and reliant on nonrenewable natural resource extraction. Copyright © 2016 Elsevier Ltd. All rights reserved.

Chemistry in forest biorefineries 2 - BIORAFF 2

Energy Technology Data Exchange (ETDEWEB)

Hupa, M. (Aabo Akademi, Process Chemistry Centre, Turku (Finland)), email: mhupa@abo.fi; Auer, M. (Aabo Akademi, Process Chemistry Centre, Turku (Finland); VTT Technical Research Centre of Finland, Espoo (Finland)), email: mauer@abo.fi

2009-10-15

The biorefinery concept may be compared to an oil refinery and petrochemical plant, where fuels and numerous intermediates are produced for further processing into high-value and speciality materials. In biorefineries, the raw material instead of mineral oil is bio-based materials. Biorefinery development at the US and European level mostly covers the use of annual crops and other bio-based materials. However, in this project focus is on non-food materials primarily in industrial pulp and paper processes and this project is limited to forest-based biorefineries. The aim of the project is also to preserve the molecular structures created by the nature as much as possible, to explore new separation and purification methods and look at new applications in the areas such as: functional food, nutritional additives, functional additives in paper making, antioxidants, new biobased materials and biobased energy. As the area, in spite of efforts to limit it, is very large, we have selected to focus on a limited number of concretized projects, which to our knowledge are complementary with other efforts for promoting biorefinery concepts. (orig.)

IEA Bioenergy Task 42 - Countries report. IEA Bioenergy Task 42 on biorefineries: Co-production of fuels, chemicals, power and materials from biomass. Final report

Energy Technology Data Exchange (ETDEWEB)

Cherubini, F.; Jungmeier, G.; Mandl, M. (Joanneum Research, Graz (Austria)) (and others)

2010-07-01

This report has been developed by the members of IEA Bioenergy Task 42 on Biorefinery: Co-production of Fuels, Chemicals, Power and Materials from Biomass (www.biorefinery.nl/ieabioenergy-task42). IEA Bioenergy is a collaborative network under the auspices of the International Energy Agency (IEA) to improve international cooperation and information exchange between national bioenergy RD and D programs. IEA Bioenergy Task 42 on Biorefinery covers a new and very broad biomass-related field, with a very large application potential, and deals with a variety of market sectors with many interested stakeholders, a large number of biomass conversion technologies, and integrated concepts of both biochemical and thermochemical processes. This report contains an overview of the biomass, bioenergy and biorefinery situation, and activities, in the Task 42 member countries: Austria, Canada, Denmark, France, Germany, Ireland, and the Netherlands. The overview includes: national bioenergy production, non-energetic biomass use, bioenergy related policy goals, national oil refineries, biofuels capacity for transport purposes, existing biorefinery industries, pilot and demo plants, and other activities of research and development (such as main national projects and stakeholders). Data are provided by National Task Leaders (NTLs), whose contact details are listed at the end of the report. (author)

The production of pigments and hydrogen through a Spirogyra sp. biorefinery

International Nuclear Information System (INIS)

Pacheco, R.; Ferreira, A.F.; Pinto, T.; Nobre, B.P.; Loureiro, D.; Moura, P.; Gouveia, L.; Silva, C.M.

2015-01-01

Highlights: • Sugar content of microalgae must increase to increase H 2 yield. • Electrocoagulation and solar dryer reduce 90% the harvesting-drying energy demand. • Paddle wheels contribute 5% to culture energy demand when using ideal 0.1 kW/m 2 . • Pigment extraction increases 2 times the biorefinery economic benefits. • Pigment energy demand account for 62% and must be reduced significantly. - Abstract: This paper discusses the overall energy consumption and greenhouse gas emissions when extracting pigments and producing hydrogen from Spirogyra sp. microalga biomass. The energy evaluation from the biomass leftovers was also included in this work. The influence of the functional unit and different allocation criteria on the biorefinery assessments is also shown. The study consists of laboratory tests showing Spirogyra sp. growth, harvesting, drying, pigment extraction and fermentation by Clostridium butyricum. Electrocoagulation and solar drying were tested and compared to conventional centrifugation and electrical dewatering in terms of their energy consumption for harvesting and dewatering, respectively. To discuss the biorefinery viability, the pigments and biohydrogen (bioH 2 ) retail costs are considered against operational costs according to electricity needs. The low yield of biochemical hydrogen and the high energy requirements for the pigment extraction were identified as main topics for further research. This research hopefully contributes to highlight the importance of energy and emission balances in order to decide on feasibility of the biorefinery

Biomass supply chain optimisation for Organosolv-based biorefineries.

Science.gov (United States)

Giarola, Sara; Patel, Mayank; Shah, Nilay

2014-05-01

This work aims at providing a Mixed Integer Linear Programming modelling framework to help define planning strategies for the development of sustainable biorefineries. The up-scaling of an Organosolv biorefinery was addressed via optimisation of the whole system economics. Three real world case studies were addressed to show the high-level flexibility and wide applicability of the tool to model different biomass typologies (i.e. forest fellings, cereal residues and energy crops) and supply strategies. Model outcomes have revealed how supply chain optimisation techniques could help shed light on the development of sustainable biorefineries. Feedstock quality, quantity, temporal and geographical availability are crucial to determine biorefinery location and the cost-efficient way to supply the feedstock to the plant. Storage costs are relevant for biorefineries based on cereal stubble, while wood supply chains present dominant pretreatment operations costs. Copyright © 2014 Elsevier Ltd. All rights reserved.

Sustainability of algal biofuel production using integrated renewable energy park (IREP) and algal biorefinery approach

International Nuclear Information System (INIS)

Subhadra, Bobban G.

2010-01-01

Algal biomass can provide viable third generation feedstock for liquid transportation fuel. However, for a mature commercial industry to develop, sustainability as well as technological and economic issues pertinent to algal biofuel sector must be addressed first. This viewpoint focuses on three integrated approaches laid out to meet these challenges. Firstly, an integrated algal biorefinery for sequential biomass processing for multiple high-value products is delineated to bring in the financial sustainability to the algal biofuel production units. Secondly, an integrated renewable energy park (IREP) approach is proposed for amalgamating various renewable energy industries established in different locations. This would aid in synergistic and efficient electricity and liquid biofuel production with zero net carbon emissions while obviating numerous sustainability issues such as productive usage of agricultural land, water, and fossil fuel usage. A 'renewable energy corridor' rich in multiple energy sources needed for algal biofuel production for deploying IREPs in the United States is also illustrated. Finally, the integration of various industries with algal biofuel sector can bring a multitude of sustainable deliverables to society, such as renewable supply of cheap protein supplements, health products and aquafeed ingredients. The benefits, challenges, and policy needs of the IREP approach are also discussed.

Sustainability Assessment of a Biorefinery Complex in Thailand

Directory of Open Access Journals (Sweden)

Pariyapat Nilsalab

2011-03-01

Full Text Available In this paper, a biorefinery complex in Thailand was assessed vis-à-vis sustainability. The complex studied includes plantations of sugarcane and a biorefinery system composed of several units including, a sugar mill, power plant, ethanol factory and fertilizer plant. The assessment aimed at evaluating the environmental and socio-economic implications relating to molasses-based ethanol production and use, and maximized utilization of the biomass materials produced as part of the biorefinery complex. Global warming potential, human development index and total value added are the three indicators that were selected to perform the assessment. The results obtained revealed that the maximization of biomass utilization at the level of the biorefinery complex provide greenhouse gases emissions reduction benefits, enhanced living conditions for sugarcane farmers and employees of the biorefinery, and economic benefits, particularly with regard to profit and income generation. These results could serve as a first step to further improve and design indicators for sustainability assessment of biomass utilization.

A New Proposal of Cellulosic Ethanol to Boost Sugarcane Biorefineries: Techno-Economic Evaluation

Directory of Open Access Journals (Sweden)

Juliana Q. Albarelli

2014-01-01

Full Text Available Commercial simulator Aspen Plus was used to simulate a biorefinery producing ethanol from sugarcane juice and second generation ethanol production using bagasse fine fraction composed of parenchyma cells (P-fraction. Liquid hot water and steam explosion pretreatment technologies were evaluated. The processes were thermal and water integrated and compared to a biorefinery producing ethanol from juice and sugarcane bagasse. The results indicated that after thermal and water integration, the evaluated processes were self-sufficient in energy demand, being able to sell the surplus electricity to the grid, and presented water intake inside the environmental limit for São Paulo State, Brazil. The processes that evaluated the use of the bagasse fine fraction presented higher economic results compared with the use of the entire bagasse. Even though, due to the high enzyme costs, the payback calculated for the biorefineries were higher than 8 years for all cases that considered second generation ethanol and the net present value for the investment was negative. The reduction on the enzyme load, in a way that the conversion rates could be maintained, is the limiting factor to make second generation ethanol competitive with the most immediate uses of bagasse: fuel for the cogeneration system to surplus electricity production.

Coproducts performances in biorefineries: Development of Claiming-based allocation models for environmental policy.

Science.gov (United States)

Gnansounou, Edgard

2018-04-01

This study revisited the fundamentals of allocation to joint products and proposed new models for allocating common greenhouse gases emissions among coproducts of biorefineries. These emissions may account for more than 80% of the total emissions of greenhouse gases of the biorefineries. The proposed models optimize the reward of coproducts for their compliance to environmental requirements. They were illustrated by a case study of wheat straw biorefinery built on the literature. Several scenarios were considered with regard to the grain yield, field emissions of greenhouse gases, allocation between grain and straw and policy requirements. The results conform to the expectations and are sensitive to the policy targets and to the environmental performance of the counterpart system. Further research works are necessary to achieve a full application to complex processes. However, the proposed models are promising towards assessing the simultaneous compliance of coproducts of a biorefinery to environment policy requirements. Copyright © 2018 Elsevier Ltd. All rights reserved.

Techno-economic comparison of centralized versus decentralized biorefineries for two alkaline pretreatment processes.

Science.gov (United States)

Stoklosa, Ryan J; Del Pilar Orjuela, Andrea; da Costa Sousa, Leonardo; Uppugundla, Nirmal; Williams, Daniel L; Dale, Bruce E; Hodge, David B; Balan, Venkatesh

2017-02-01

In this work, corn stover subjected to ammonia fiber expansion (AFEX™) 1 pretreatment or alkaline pre-extraction followed by hydrogen peroxide post-treatment (AHP pretreatment) were compared for their enzymatic hydrolysis yields over a range of solids loadings, enzymes loadings, and enzyme combinations. Process techno-economic models were compared for cellulosic ethanol production for a biorefinery that handles 2000tons per day of corn stover employing a centralized biorefinery approach with AHP or a de-centralized AFEX pretreatment followed by biomass densification feeding a centralized biorefinery. A techno-economic analysis (TEA) of these scenarios shows that the AFEX process resulted in the highest capital investment but also has the lowest minimum ethanol selling price (MESP) at $2.09/gal, primarily due to good energy integration and an efficient ammonia recovery system. The economics of AHP could be made more competitive if oxidant loadings were reduced and the alkali and sugar losses were also decreased. Copyright © 2016 Elsevier Ltd. All rights reserved.

Economic and environmental assessment of n-butanol production in an integrated first and second generation sugarcane biorefinery: Fermentative versus catalytic routes

International Nuclear Information System (INIS)

Pereira, L.G.; Dias, M.O.S.; Mariano, A.P.; Maciel Filho, R.; Bonomi, A.

2015-01-01

Highlights: • Financial and environmental impacts of n-butanol production were investigated. • Analysis showed promising economic results for ABE fermentation scenarios. • Ethanol catalysis to butanol presented discouraging figures. • n-Butanol use as fuel demonstrated favorable GHG emissions results. - Abstract: n-Butanol produced from renewable resources has attracted increasing interest, mostly for its potential use as liquid biofuel for transportation. Process currently used in the industry (Acetone–Butanol–Ethanol fermentation – ABE) faces major technical challenges, which could be overcome by an alternative production through ethanol catalysis. In this study, both routes are evaluated by means of their financial viabilities and environmental performance assessed through the Virtual Sugarcane Biorefinery methodological framework. Comparative financial analysis of the routes integrated to a first and second generation sugarcane biorefinery shows that, despite the drawbacks, ABE process for fermentation of the pentoses liquor is more attractive than the catalysis of ethanol to n-butanol and co-products. n-Butanol use as fuel demonstrated favorable environmental results for climate change as figures showed over 50% reduction in greenhouse gas emission compared with gasoline.

Estimating Hydrogen Production Potential in Biorefineries Using Microbial Electrolysis Cell Technology

Energy Technology Data Exchange (ETDEWEB)

Borole, Abhijeet P [ORNL; Mielenz, Jonathan R [ORNL

2011-01-01

Microbial electrolysis cells (MECs) are devices that use a hybrid biocatalysis-electrolysis process for production of hydrogen from organic matter. Future biofuel and bioproducts industries are expected to generate significant volumes of waste streams containing easily degradable organic matter. The emerging MEC technology has potential to derive added- value from these waste streams via production of hydrogen. Biorefinery process streams, particularly the stillage or distillation bottoms contain underutilized sugars as well as fermentation and pretreatment byproducts. In a lignocellulosic biorefinery designed for producing 70 million gallons of ethanol per year, up to 7200 m3/hr of hydrogen can be generated. The hydrogen can either be used as an energy source or a chemical reagent for upgrading and other reactions. The energy content of the hydrogen generated is sufficient to meet 57% of the distillation energy needs. We also report on the potential for hydrogen production in existing corn mills and sugar-based biorefineries. Removal of the organics from stillage has potential to facilitate water recycle. Pretreatment and fermentation byproducts generated in lignocellulosic biorefinery processes can accumulate to highly inhibitory levels in the process streams, if water is recycled. The byproducts of concern including sugar- and lignin- degradation products such as furans and phenolics can also be converted to hydrogen in MECs. We evaluate hydrogen production from various inhibitory byproducts generated during pretreatment of various types of biomass. Finally, the research needs for development of the MEC technology and aspects particularly relevant to the biorefineries are discussed.

The territorial biorefinery as a new business model

Directory of Open Access Journals (Sweden)

Ion Lucian Ceapraz

2016-05-01

Full Text Available The transition toward more sustainable industries opens the way for alternative solutions based upon new economic models using agricultural inputs or biomass to substitute oil-based inputs. In this context different generations of biorefinery complexes are evolving rapidly and highlight the numerous possibilities for the organization of processing activities, from supply to final markets. The evolution of these biorefineries has followed two main business models, the port biorefinery, based on the import of raw materials, and the territorial biorefinery, based on strong relationships with local (or regional supply bases. In this article we focus on the concept of the ‘territorial biorefinery’, seen as a new business model. We develop the idea of a link between the biorefinery and its territory through several relevant theoretical approaches and demonstrate that the definition of ‘territorial biorefinery’ does not achieve, from these theoretical backgrounds, a consensus. More importantly, we emphasise that the theoretical assumptions underlying the different definitions used should be made explicit in order to facilitate the manner in which practioners study, develop and set up businesses of this kind.

Separation Technology - Making a difference in biorefineries

NARCIS (Netherlands)

Kiss, Anton Alexandru; Lange, Jean Paul; Schuur, Boelo; Brilman, Derk Willem Frederik; van der Ham, Aloysius G.J.; Kersten, Sascha R.A.

2016-01-01

In the quest for a sustainable bio-based economy, biorefineries play a central role as they involve the sustainable processing of biomass into marketable products and energy. This paper aims to provide a perspective on applications of separations that can make a great difference in biorefineries, by

Cell disruption for microalgae biorefineries.

Science.gov (United States)

Günerken, E; D'Hondt, E; Eppink, M H M; Garcia-Gonzalez, L; Elst, K; Wijffels, R H

2015-01-01

Microalgae are a potential source for various valuable chemicals for commercial applications ranging from nutraceuticals to fuels. Objective in a biorefinery is to utilize biomass ingredients efficiently similarly to petroleum refineries in which oil is fractionated in fuels and a variety of products with higher value. Downstream processes in microalgae biorefineries consist of different steps whereof cell disruption is the most crucial part. To maintain the functionality of algae biochemicals during cell disruption while obtaining high disruption yields is an important challenge. Despite this need, studies on mild disruption of microalgae cells are limited. This review article focuses on the evaluation of conventional and emerging cell disruption technologies, and a comparison thereof with respect to their potential for the future microalgae biorefineries. The discussed techniques are bead milling, high pressure homogenization, high speed homogenization, ultrasonication, microwave treatment, pulsed electric field treatment, non-mechanical cell disruption and some emerging technologies. Copyright © 2015 Elsevier Inc. All rights reserved.

Early stage design and analysis of biorefinery networks

DEFF Research Database (Denmark)

Sin, Gürkan

2013-01-01

Recent work regarding biorefineries resulted in many competing concepts and technologies for conversion of renewable bio-based feedstock into many promising products including fuels, chemicals, materials, etc. The design of a biorefinery process requires, at its earlier stages, the selection...... of the process configuration which exhibits the best performances, for a given set of economical, technical and environmental criteria. To this end, we formulate a computer-aided framework as an enabling technology for early stage design and analysis of biorefineries. The tool represents different raw materials......, different products and different available technologies and proposes a conceptual (early stage) biorefinery network. This network can then be the basis for further detailed and rigorous model-based studies. In this talk, we demonstrate the application of the tool for generating an early stage optimal...

Lignocellulosic biorefinery as a model for sustainable development of biofuels and value added products.

Science.gov (United States)

De Bhowmick, Goldy; Sarmah, Ajit K; Sen, Ramkrishna

2018-01-01

A constant shift of society's dependence from petroleum-based energy resources towards renewable biomass-based has been the key to tackle the greenhouse gas emissions. Effective use of biomass feedstock, particularly lignocellulosic, has gained worldwide attention lately. Lignocellulosic biomass as a potent bioresource, however, cannot be a sustainable alternative if the production cost is too high and/ or the availability is limited. Recycling the lignocellulosic biomass from various sources into value added products such as bio-oil, biochar or other biobased chemicals in a bio-refinery model is a sensible idea. Combination of integrated conversion techniques along with process integration is suggested as a sustainable approach. Introducing 'series concept' accompanying intermittent dark/photo fermentation with co-cultivation of microalgae is conceptualised. While the cost of downstream processing for a single type of feedstock would be high, combining different feedstocks and integrating them in a bio-refinery model would lessen the production cost and reduce CO 2 emission. Copyright © 2017 Elsevier Ltd. All rights reserved.

A sustainable woody biomass biorefinery.

Science.gov (United States)

Liu, Shijie; Lu, Houfang; Hu, Ruofei; Shupe, Alan; Lin, Lu; Liang, Bin

2012-01-01

Woody biomass is renewable only if sustainable production is imposed. An optimum and sustainable biomass stand production rate is found to be one with the incremental growth rate at harvest equal to the average overall growth rate. Utilization of woody biomass leads to a sustainable economy. Woody biomass is comprised of at least four components: extractives, hemicellulose, lignin and cellulose. While extractives and hemicellulose are least resistant to chemical and thermal degradation, cellulose is most resistant to chemical, thermal, and biological attack. The difference or heterogeneity in reactivity leads to the recalcitrance of woody biomass at conversion. A selection of processes is presented together as a biorefinery based on incremental sequential deconstruction, fractionation/conversion of woody biomass to achieve efficient separation of major components. A preference is given to a biorefinery absent of pretreatment and detoxification process that produce waste byproducts. While numerous biorefinery approaches are known, a focused review on the integrated studies of water-based biorefinery processes is presented. Hot-water extraction is the first process step to extract value from woody biomass while improving the quality of the remaining solid material. This first step removes extractives and hemicellulose fractions from woody biomass. While extractives and hemicellulose are largely removed in the extraction liquor, cellulose and lignin largely remain in the residual woody structure. Xylo-oligomers, aromatics and acetic acid in the hardwood extract are the major components having the greatest potential value for development. Higher temperature and longer residence time lead to higher mass removal. While high temperature (>200°C) can lead to nearly total dissolution, the amount of sugars present in the extraction liquor decreases rapidly with temperature. Dilute acid hydrolysis of concentrated wood extracts renders the wood extract with monomeric sugars

Alternative use of grassland biomass for biorefinery in Ireland: a scoping study

NARCIS (Netherlands)

O'Keeffe, S.

2010-01-01

The need to reduce greenhouse gas emissions and dependency on fossil fuels has been one of the main driving forces to use renewable resources for energy and chemicals. The integrated use of grassland biomass for the production of chemicals and energy, also known as Green Biorefinery (GBR), has

Biofuels and the biorefinery concept

International Nuclear Information System (INIS)

Taylor, Gail

2008-01-01

Liquid fuels can be made by refining a range of biomass materials, including oil-rich and sugar-rich crops such as oil-seed rape and sugar beet, biomass that consists mainly of plant cell walls (second generation lignocellulosics), macro- and micro-alga, or material that would now be discarded as waste. This can include animal bi-products as well as waste wood and other resources. In the medium-term, plant cell (lignocellulosic) material is likely to be favoured as the feedstock for biorefineries because of its availability. The UK may make use of a number of these options because of its complex agricultural landscape. There are now a range of targets for biofuel use in the UK, although their environmental effects are disputed. The technology of refining these materials is well known. Possible outputs include biodiesel and bioethanol, both of which can be used as transport fuel. Other potential products include hydrogen, polymers and a wide range of value-added chemicals, making this technology important in a post-petrochemical world. Biorefineries could use cogeneration to produce electricity. The paper identifies a range of research and development priorities which must be met if this opportunity is to be exploited fully

European biorefineries: Implications for land, trade and employment

International Nuclear Information System (INIS)

Thornley, Patricia; Chong, Katie; Bridgwater, Tony

2014-01-01

Highlights: • Five diverse European member states could support around 30 biorefineries. • The facilities would create around 2 million man-years of employment. • Biorefineries create more jobs per unit of feedstock than bioelectricity plants. • Contribution to national GDP is very small; but agriculturally significant. • Increased straw demand could indirectly increase greenhouse gas emissions. - Abstract: Biorefineries are expected to play a major role in a future low carbon economy and substantial investments are being made to support this vision. However, it is important to consider the wider socio-economic impacts of such a transition. This paper quantifies the potential trade, employment and land impacts of economically viable European biorefinery options based on indigenous straw and wood feedstocks. It illustrates how there could be potential for 70–80 European biorefineries, but not hundreds. A single facility could generate tens of thousands of man-years of employment and employment creation per unit of feedstock is higher than for biomass power plants. However, contribution to national GDP is unlikely to exceed 1% in European member states, although contributions to national agricultural productivity may be more significant, particularly with straw feedstocks. There is also a risk that biorefinery development could result in reduced rates of straw incorporation into soil, raising concerns that economically rational decisions to sell rather than reincorporate straw could result in increased agricultural land-use or greenhouse gas emissions

Optimizing Biorefinery Design and Operations via Linear Programming Models

Energy Technology Data Exchange (ETDEWEB)

Talmadge, Michael; Batan, Liaw; Lamers, Patrick; Hartley, Damon; Biddy, Mary; Tao, Ling; Tan, Eric

2017-03-28

The ability to assess and optimize economics of biomass resource utilization for the production of fuels, chemicals and power is essential for the ultimate success of a bioenergy industry. The team of authors, consisting of members from the National Renewable Energy Laboratory (NREL) and the Idaho National Laboratory (INL), has developed simple biorefinery linear programming (LP) models to enable the optimization of theoretical or existing biorefineries. The goal of this analysis is to demonstrate how such models can benefit the developing biorefining industry. It focuses on a theoretical multi-pathway, thermochemical biorefinery configuration and demonstrates how the biorefinery can use LP models for operations planning and optimization in comparable ways to the petroleum refining industry. Using LP modeling tools developed under U.S. Department of Energy's Bioenergy Technologies Office (DOE-BETO) funded efforts, the authors investigate optimization challenges for the theoretical biorefineries such as (1) optimal feedstock slate based on available biomass and prices, (2) breakeven price analysis for available feedstocks, (3) impact analysis for changes in feedstock costs and product prices, (4) optimal biorefinery operations during unit shutdowns / turnarounds, and (5) incentives for increased processing capacity. These biorefinery examples are comparable to crude oil purchasing and operational optimization studies that petroleum refiners perform routinely using LPs and other optimization models. It is important to note that the analyses presented in this article are strictly theoretical and they are not based on current energy market prices. The pricing structure assigned for this demonstrative analysis is consistent with $4 per gallon gasoline, which clearly assumes an economic environment that would favor the construction and operation of biorefineries. The analysis approach and examples provide valuable insights into the usefulness of analysis tools for

Toward a common classification approach for biorefinery systems

NARCIS (Netherlands)

Cherubini, F.; Jungmeier, G.; Wellisch, M.; Wilke, T.; Skiadas, I.; Ree, van R.; Jong, de E.

2009-01-01

This paper deals with a biorefinery classification approach developed within International Energy Agency (IEA) Bioenergy Task 42. Since production of transportation biofuels is seen as the driving force for future biorefinery developments, a selection of the most interesting transportation biofuels

The biorefinery concept: Using biomass instead of oil for producing energy and chemicals

International Nuclear Information System (INIS)

Cherubini, Francesco

2010-01-01

A great fraction of worldwide energy carriers and material products come from fossil fuel refinery. Because of the on-going price increase of fossil resources, their uncertain availability, and their environmental concerns, the feasibility of oil exploitation is predicted to decrease in the near future. Therefore, alternative solutions able to mitigate climate change and reduce the consumption of fossil fuels should be promoted. The replacement of oil with biomass as raw material for fuel and chemical production is an interesting option and is the driving force for the development of biorefinery complexes. In biorefinery, almost all the types of biomass feedstocks can be converted to different classes of biofuels and biochemicals through jointly applied conversion technologies. This paper provides a description of the emerging biorefinery concept, in comparison with the current oil refinery. The focus is on the state of the art in biofuel and biochemical production, as well as discussion of the most important biomass feedstocks, conversion technologies and final products. Through the integration of green chemistry into biorefineries, and the use of low environmental impact technologies, future sustainable production chains of biofuels and high value chemicals from biomass can be established. The aim of this bio-industry is to be competitive in the market and lead to the progressive replacement of oil refinery products. (author)

Anaerobic digestion in combination with 2nd generation ethanol production for maximizing biofuels yield from lignocellulosic biomass – testing in an integrated pilot-scale biorefinery plant

DEFF Research Database (Denmark)

Uellendahl, Hinrich; Ahring, Birgitte Kiær

An integrated biorefinery concept for 2nd generation bioethanol production together with biogas production from the fermentation effluent was tested in pilot-scale. The pilot plant comprised pretreatment, enzymatic hydrolysis, hexose and pentose fermentation into ethanol and anaerobic digestion......-VS/(m3•d) a methane yield of 340 L/kg-VS was achieved for thermophilic operation while 270 L/kg-VS was obtained under mesophilic conditions. Thermophilic operation was, however, less robust towards further increase of the loading rate and for loading rates higher than 5 kg-VS/(m3•d) the yield was higher...... for mesophilic than for thermophilic operation. The effluent from the ethanol fermentation showed no signs of toxicity to the anaerobic microorganisms. Implementation of the biogas production from the fermentation effluent accounted for about 30% higher biofuels yield in the biorefinery compared to a system...

Bioproducts fro biorefineries

Science.gov (United States)

Biorefineries of the future may convert biomass to fuels, chemicals, and materials that are provided today by petroleum refineries. Bioproducts are attractive because they could offer benefits of renewability, environmental and personal safety, and biodegradability or recyclability. However, a gre...

Process Intensification for Cellulosic Biorefineries.

Science.gov (United States)

Sadula, Sunitha; Athaley, Abhay; Zheng, Weiqing; Ierapetritou, Marianthi; Saha, Basudeb

2017-06-22

Utilization of renewable carbon source, especially non-food biomass is critical to address the climate change and future energy challenge. Current chemical and enzymatic processes for producing cellulosic sugars are multistep, and energy- and water-intensive. Techno-economic analysis (TEA) suggests that upstream lignocellulose processing is a major hurdle to the economic viability of the cellulosic biorefineries. Process intensification, which integrates processes and uses less water and energy, has the potential to overcome the aforementioned challenges. Here, we demonstrate a one-pot depolymerization and saccharification process of woody biomass, energy crops, and agricultural residues to produce soluble sugars with high yields. Lignin is separated as a solid for selective upgrading. Further integration of our upstream process with a reactive extraction step makes energy-efficient separation of sugars in the form of furans. TEA reveals that the process efficiency and integration enable, for the first time, economic production of feed streams that could profoundly improve process economics for downstream cellulosic bioproducts. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Modelling, synthesis and analysis of biorefinery networks

DEFF Research Database (Denmark)

Bertran, Maria-Ona

for the conversion of biomass into chemicals, fuels and energy, because they have the potential to maximize biomass value while reducing emissions. The design of biorefinery networks is a complex decisionmaking problem that involves the selection of feedstocks, processing technologies, products, geographical...... locations, and operating conditions, among others. Unlike petroleumbased processing networks, biorefineries rely on feedstocks that are nonhomogeneous across geographical areas in terms of their availability, type and properties. For this reason, the performance of biorefinery networks depends...... of reactions to convert available biomassbased feedstocks into desired products, the selection of processing routes and technologies from a large set of alternatives, or the generation of hybrid technologies through process intensification. Systematic process synthesis and design methods have been developed...

Early-Stage Design and Analysis of Biorefinery Networks

DEFF Research Database (Denmark)

Cheali, Peam; Quaglia, Alberto; Loureiro da Costa Lira Gargalo, Carina

2016-01-01

for the production of fuel, chemicals, and materials from renewable feedstock instead of fossil fuel. An emerging technology in response to these challenges is the biorefinery concept. The biorefinery is defined as the set of processes converting a bio‐based feedstock into products such as fuels, chemicals...

Biorefinery of microalgae - opportunities and constraints for different production scenarios.

Science.gov (United States)

Hariskos, Ioanna; Posten, Clemens

2014-06-01

In order to design economically feasible production processes it is necessary, as part of the biorefinery concept, to valorize all constituents of the microalgal biomass. Such an approach requires appropriate biorefinery side-process strategies to be adapted to production of the primary product. These strategies are particularly valid for microalgae, since the composition and amount of residual biomass can vary significantly depending on cell stoichiometry and cultivation techniques. This review investigates opportunities and constraints for biorefinery concepts in production scenarios for four different products from microalgae with different market volumes, including high- and medium-value products, whole cells and biodiesel. Approaches to close material and energy balances, as well as to adapt the biorefinery according to biological potential, process routes, and market needs are presented, which will further contribute to making the biorefinery concept a success. Copyright © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Environmental impacts of a lignocellulose feedstock biorefinery system: An assessment

International Nuclear Information System (INIS)

Uihlein, Andreas; Schebek, Liselotte

2009-01-01

Biomass is a sustainable alternative to fossil energy carriers which are used to produce fuels, electricity, chemicals, and other goods. At the moment, the main biobased products are obtained by the conversion of biomass to basic products like starch, oil, and cellulose. In addition, some single chemicals and fuels are produced. Presently, concepts of biorefineries which will produce a multitude of biomass-derived products are discussed. Biorefineries are supposed to contribute to a more sustainable resource supply and to a reduction in greenhouse gas emissions. However, biobased products and fuels may also be associated with environmental disadvantages due to, e.g. land use or eutrophication of water. We performed a Life Cycle Assessment of a lignocellulose feedstock biorefinery system and compared it to conventional product alternatives. The biorefinery was found to have the greatest environmental impacts in the three categories: fossil fuel use, respiratory effects, and carcinogenics. The environmental impacts predominantly result from the provision of hydrochloric acid and to a smaller extent also from the provision of process heat. As the final configuration of the biorefinery cannot be determined yet, various variants of the biorefinery system were analysed. The optimum variant (acid and heat recoveries) yields better results than the fossil alternatives, with the total environmental impacts being approx. 41% lower than those of the fossil counterparts. For most biorefinery variants analysed, the environmental performance in some impact categories is better than that of the fossil counterparts while disadvantages can be seen in other categories.

Swedish Pulp Mill Biorefineries. A vision of future possibilities

Energy Technology Data Exchange (ETDEWEB)

Berntsson, Thore (Chamers Univ. of Technology, Goeteborg (Sweden)); Axegaard, Peter; Backlund, Birgit; Samuelsson, Aasa; Berglin, Niklas; Lindgren, Karin (STFI-Packforsk, Stockholm (Sweden))

2008-07-01

Today, modern science could make it possible to develop techniques for refining almost the whole wood-matter, pulp mill side streams and bark compounds into platform chemicals, electricity, high quality fuels and structured feed-stock for chemicals and materials. The major challenge is to convert the state of basic scientific knowledge into industrial practise. Our definition of an integrated biorefinery is: 'Full utilization of the incoming biomass and other raw materials for simultaneous and economically optimized production of fibres, chemicals and energy'. Examples of products from a pulp mill biorefinery are: Chemicals and Materials (Phenols, adhesives, carbon fibres, activated carbon, binders, barriers, adhesives, antioxidants, surfactants, chelants, solvents, adhesives surfactants, descaling agents, specialty polymers, pharmaceuticals, nutraceuticals, cosmetics etc., Biofuels (pellets, lignin fuel, methanol, DME, ethanol etc), Electricity (BLGCC, condensing power etc.). The new or increased amounts of traditional products can be made from internal and/or external biomass. Three different levels can be identified: A high degree of energy saving in future mills, especially chemical pulp mills, will lead to large amounts of excess internal biomass which can be transferred to products mentioned above, Components in e.g. the black liquor, forest residues and bark can be upgraded to more valuable ones and the energy balance of the mill is kept through fuel import, wholly or partly depending on the level of mill energy efficiency. This imported fuel can be biomass or other types. External (imported) biomass (in some cases together with excess internal biomass) can be upgraded using synergy effects of docking this upgrading to a pulp mill. Electricity has been included as one of the possible biorefinery products. The electricity production in a mill can be increased in several ways which cannot be directly considered as biorefineries, e.g. recovery boiler

High impact biowastes from South European agro-industries as feedstock for second-generation biorefineries.

Science.gov (United States)

Scoma, Alberto; Rebecchi, Stefano; Bertin, Lorenzo; Fava, Fabio

2016-01-01

Availability of bio-based chemicals, materials and energy at reasonable cost will be one of the forthcoming issues for the EU economy. In particular, the development of technologies making use of alternative resources to fossil fuels is encouraged by the current European research and innovation strategy to face the societal challenge of natural resource scarcity, fossil resource dependence and sustainable economic growth. In this respect, second- generation biorefineries, i.e. biorefineries fed with biowastes, appear to be good candidates to substitute and replace the present downstream processing scheme. Contrary to first-generation biorefineries, which make use of dedicated crops or primary cultivations to achieve such a goal, the former employ agricultural, industrial, zootechnical, fishery and forestry biowastes as the main feedstock. This leaves aside any ethical and social issue generated by first-generation approaches, and concomitantly prevents environmental and economical issues associated with the disposal of the aforementioned leftovers. Unfortunately, to date, a comprehensive and updated mapping of the availability and potential use of bioresources for second-generation biorefineries in Europe is missing. This is a lack that severely limits R&D and industrial applications in the sector. On the other hand, attempts at valorizing the most diverse biowastes dates back to the nineteenth century and plenty of information in the literature on their sustainable exploitation is available. However, the large majority of these investigations have been focused on single fractions of biowastes or single steps of biowaste processing, preventing considerations on an integrated and modular (cascade) approach for the whole valorization of organic leftovers. This review aims at addressing these issues by gathering recent data on (a) some of the main high-impact biowastes located in Europe and in particular in its Southern part, and (b) the bio-based chemicals, materials

Using product driven process synthesis in the biorefinery

NARCIS (Netherlands)

Kiskini, A.; Zondervan, E.; Wierenga, P.A.; Poiesz, E.; Gruppen, H.

2015-01-01

In this work, we propose the use of the product-driven process synthesis (PDPS) methodology for the product and process design stage in biorefinery. The aim of the biorefinery is to optimize the total use of the whole feedstock – with focus being on various products simultaneously – rather than to

Can organic crops increase the economic potential for biorefineries?

OpenAIRE

Gylling, Morten; Jakobsen, Anders B.

2017-01-01

With the current cost and price relations, the profitability of biorefineries is still challenged. The use of organic crops, such as grass, in biorefineries can increase the profitability because organic products can be sold at higher prices.

From tiny microalgae to huge biorefineries

OpenAIRE

Gouveia, L.

2014-01-01

Microalgae are an emerging research field due to their high potential as a source of several biofuels in addition to the fact that they have a high-nutritional value and contain compounds that have health benefits. They are also highly used for water stream bioremediation and carbon dioxide mitigation. Therefore, the tiny microalgae could lead to a huge source of compounds and products, giving a good example of a real biorefinery approach. This work shows and presents examples of experimental...

Fully Integrated Lignocellulosic Biorefinery with Onsite Production of Enzymes and Yeast

Energy Technology Data Exchange (ETDEWEB)

Kumar, Manoj [DSM Innovation, Incorporated, San Francisco, CA (United States)

2010-06-14

Lignocellulosic biomass is the most abundant, least expensive renewable natural biological resource for the production of biobased products and bioenergy is important for the sustainable development of human civilization in 21st century. For making the fermentable sugars from lignocellulosic biomass, a reduction in cellulase production cost, an improvement in cellulase performance, and an increase in sugar yields are all vital to reduce the processing costs of biorefineries. Improvements in specific cellulase activities for non-complexed cellulase mixtures can be implemented through cellulase engineering based on rational design or directed evolution for each cellulase component enzyme, as well as on the reconstitution of cellulase components. In this paper, we will provide DSM's efforts in cellulase research and developments and focus on limitations. Cellulase improvement strategies based on directed evolution using screening on relevant substrates, screening for higher thermal tolerance based on activity screening approaches such as continuous culture using insoluble cellulosic substrates as a powerful selection tool for enriching beneficial cellulase mutants from the large library. We will illustrate why and how thermostable cellulases are vital for economic delivery of bioproducts from cellulosic biomass using biochemical conversion approach.

Superstructure-based optimization of biorefinery networks: Production of biodiesel

DEFF Research Database (Denmark)

Bertran, Maria-Ona; Orsi, Albert; Gani, Rafiqul

2015-01-01

through a practical case study for the production biodiesel from a variety of feedstock. The different biorefinery processing alternatives are represented in a superstructure and the associated data is collected and stored in a database. Once a specific biorefinery synthesis problem is formulated...

Jobs and Economic Development Impact (JEDI) User Reference Guide: Fast Pyrolysis Biorefinery Model

Energy Technology Data Exchange (ETDEWEB)

Zhang, Yimin [National Renewable Energy Lab. (NREL), Golden, CO (United States); Goldberg, Marshall [MRG and Associates, Nevada City, CA (United States)

2015-02-01

This guide -- the JEDI Fast Pyrolysis Biorefinery Model User Reference Guide -- was developed to assist users in operating and understanding the JEDI Fast Pyrolysis Biorefinery Model. The guide provides information on the model's underlying methodology, as well as the parameters and data sources used to develop the cost data utilized in the model. This guide also provides basic instruction on model add-in features and a discussion of how the results should be interpreted. Based on project-specific inputs from the user, the JEDI Fast Pyrolysis Biorefinery Model estimates local (e.g., county- or state-level) job creation, earnings, and output from total economic activity for a given fast pyrolysis biorefinery. These estimates include the direct, indirect and induced economic impacts to the local economy associated with the construction and operation phases of biorefinery projects.Local revenue and supply chain impacts as well as induced impacts are estimated using economic multipliers derived from the IMPLAN software program. By determining the local economic impacts and job creation for a proposed biorefinery, the JEDI Fast Pyrolysis Biorefinery Model can be used to field questions about the added value biorefineries might bring to a local community.

Carbon dioxide utilization in a microalga-based biorefinery: Efficiency of carbon removal and economic performance under carbon taxation.

Science.gov (United States)

Wiesberg, Igor Lapenda; Brigagão, George Victor; de Medeiros, José Luiz; de Queiroz Fernandes Araújo, Ofélia

2017-12-01

Coal-fired power plants are major stationary sources of carbon dioxide and environmental constraints demand technologies for abatement. Although Carbon Capture and Storage is the most mature route, it poses severe economic penalty to power generation. Alternatively, this penalty is potentially reduced by Carbon Capture and Utilization, which converts carbon dioxide to valuable products, monetizing it. This work evaluates a route consisting of carbon dioxide bio-capture by Chlorella pyrenoidosa and use of the resulting biomass as feedstock to a microalgae-based biorefinery; Carbon Capture and Storage route is evaluated as a reference technology. The integrated arrangement comprises: (a) carbon dioxide biocapture in a photobioreactor, (b) oil extraction from part of the produced biomass, (b) gasification of remaining biomass to obtain bio-syngas, and (c) conversion of bio-syngas to methanol. Calculation of capital and operational expenditures are estimated based on mass and energy balances obtained by process simulation for both routes (Carbon Capture and Storage and the biorefinery). Capital expenditure for the biorefinery is higher by a factor of 6.7, while operational expenditure is lower by a factor of 0.45 and revenues occur only for this route, with a ratio revenue/operational expenditure of 1.6. The photobioreactor is responsible for one fifth of the biorefinery capital expenditure, with footprint of about 1000 ha, posing the most significant barrier for technical and economic feasibility of the proposed biorefinery. The Biorefinery and Carbon Capture and Storage routes show carbon dioxide capture efficiency of 73% and 48%, respectively, with capture cost of 139$/t and 304$/t. Additionally, the biorefinery has superior performance in all evaluated metrics of environmental impacts. Copyright © 2017 Elsevier Ltd. All rights reserved.

Economic risk analysis and critical comparison of optimal biorefinery concepts

DEFF Research Database (Denmark)

Cheali, Peam; Posada, John A.; Gernaey, Krist

2016-01-01

In this paper, eight optimal biorefinery concepts for biofuels and biochemicals production are critically analyzed and compared in terms of their techno-economic performance and associated economic risks against historical market fluctuations. The investigated biorefinery concepts consider...... different combinations of biomass feedstock (lignocellulosic versus algal) and conversion technologies (biochemical versus thermochemical). In addition, the economic performance of each biorefinery concept is tested assuming a sudden drop in oil prices in order to compare the fitness/survival of each...... concept under extreme market disturbances. The analyses reveal amongst others that: (i) lignocellulosic bioethanol production is not economically feasible considering a drop in oil prices (a negative internal rate of return); (ii) a multi-product biorefinery concept, where bioethanol is upgraded to higher...

Thermochemical biorefinery based on dimethyl ether as intermediate: Technoeconomic assessment

International Nuclear Information System (INIS)

Haro, P.; Ollero, P.; Villanueva Perales, A.L.; Gómez-Barea, A.

2013-01-01

Highlights: ► A thermochemical biorefinery based on bio-DME as intermediate is studied. ► The assessed concepts (12) lead to multi-product generation (polygeneration). ► In all concepts DME is converted by carbonylation or hydrocarbonylation. ► Rates of return are similar to or higher than plants producing a single product. -- Abstract: Thermochemical biorefinery based on dimethyl ether (DME) as an intermediate is studied. DME is converted into methyl acetate, which can either be hydrogenated to ethanol or sold as a co-product. Considering this option together with a variety of technologies for syngas upgrading, 12 different process concepts are analyzed. The considered products are ethanol, methyl acetate, H 2 , DME and electricity. The assessment of each alternative includes biomass pretreatment, gasification, syngas clean-up and conditioning, DME synthesis and conversion, product separation, and heat and power integration. A plant size of 500 MW th processing poplar chips is taken as a basis. The resulting energy efficiency to products ranges from 34.9% to 50.2%. The largest internal rate of return (28.74%) corresponds to a concept which produces methyl acetate, DME and electricity (exported to grid). A sensitivity analysis with respect to total plant investment (TPI), total operation costs (TOC) and market price of products was carried out. The overall conclusion is that, despite its greater complexity, this kind of thermochemical biorefinery is more profitable than thermochemical bioprocesses oriented to a single product.

Pretreatment techniques for biofuels and biorefineries

Energy Technology Data Exchange (ETDEWEB)

Fang, Zhen (ed.) [Chinese Academy of Sciences, Kunming, YN (China). Xishuangbanna Tropical Botonical Garden

2013-02-01

The first book focused on pretreatment techniques for biofuels contributed by the world's leading experts. Extensively covers the different types of biomass, various pretreatment approaches and methods that show the subsequent production of biofuels and chemicals. In addition to traditional pretreatment methods, novel techniques are also introduced and discussed. An accessible reference work for students, researchers, academicians and industrialists in biorefineries. This book includes 19 chapters contributed by the world's leading experts on pretreatment methods for biomass. It extensively covers the different types of biomass (e.g. molasses, sugar beet pulp, cheese whey, sugarcane residues, palm waste, vegetable oil, straws, stalks and wood), various pretreatment approaches (e.g. physical, thermal, chemical, physicochemical and biological) and methods that show the subsequent production of biofuels and chemicals such as sugars, ethanol, extracellular polysaccharides, biodiesel, gas and oil. In addition to traditional methods such as steam, hot-water, hydrothermal, diluted-acid, organosolv, ozonolysis, sulfite, milling, fungal and bacterial, microwave, ultrasonic, plasma, torrefaction, pelletization, gasification (including biogas) and liquefaction pretreatments, it also introduces and discusses novel techniques such as nano and solid catalysts, organic electrolyte solutions and ionic liquids. This book offers a review of state-of-the-art research and provides guidance for the future paths of developing pretreatment techniques of biomass for biofuels, especially in the fields of biotechnology, microbiology, chemistry, materials science and engineering. It intends to provide a systematic introduction of pretreatment techniques. It is an accessible reference work for students, researchers, academicians and industrialists in biorefineries.

Recovery Act: Alpena Biorefinery and Alpena Biorefinery Lignin Separation Final Technical Report

Energy Technology Data Exchange (ETDEWEB)

Retsina, Theodora [American Process Inc., Atlanta, GA (United States)

2016-12-19

The Alpena Biorefinery (AB) was constructed in Alpena, Michigan, at the Decorative Panels International hardboard manufacturing facility. The goal of the AB was to demonstrate a modular, technically successful, and financially viable process of making cellulosic ethanol from woody biomass extract at wood processing facilities. At full capacity, the AB can produce 894,200 gallons per year of cellulosic ethanol and 696,000 gallons per year of aqueous potassium acetate, using extract from northern hardwood and aspen woodchips feedstock. The project objectives and the value proposition of AB promote the national goals of energy independence, greenhouse gas reduction, and green job creation and retention. A successful outcome of the Alpena Biorefinery project has been commercial sales of the first ever cellulosic ethanol RINS generated from woody biomass in the US, under the EPA’s Renewable Fuels Standard Program. We believe that American Process is also likely the first company in the world to produce commercial quantities of cellulosic ethanol from mixed forest residue. Life Cycle Analysis performed by Michigan Institute of Technology found that the entire life cycle greenhouse gas emissions from the plant’s cellulosic ethanol were only 25 percent that of petroleum-based gasoline. They found the potassium acetate runway de-icer coproduct generates up to 45 percent less greenhouse gases than the production of conventional potassium acetate. The Alpena Biorefinery project created 31 permanent jobs for direct employees and helped retain 200 jobs associated with the existing Decorative Panels International facility, by increasing its economic viability through significant savings in waste water treatment costs. The AB project has been declared a Michigan Center of Energy Excellence and was awarded a $4 million State of Michigan grant. The project also received New Market Tax Credit financing for locating in an economically distressed community. All other equity funds

Development of efficient, integrated cellulosic biorefineries : LDRD final report.

Energy Technology Data Exchange (ETDEWEB)

Teh, Kwee-Yan; Hecht, Ethan S.; Shaddix, Christopher R.; Buffleben, George M.; Dibble, Dean C.; Lutz, Andrew E.

2010-09-01

Cellulosic ethanol, generated from lignocellulosic biomass sources such as grasses and trees, is a promising alternative to conventional starch- and sugar-based ethanol production in terms of potential production quantities, CO{sub 2} impact, and economic competitiveness. In addition, cellulosic ethanol can be generated (at least in principle) without competing with food production. However, approximately 1/3 of the lignocellulosic biomass material (including all of the lignin) cannot be converted to ethanol through biochemical means and must be extracted at some point in the biochemical process. In this project we gathered basic information on the prospects for utilizing this lignin residue material in thermochemical conversion processes to improve the overall energy efficiency or liquid fuel production capacity of cellulosic biorefineries. Two existing pretreatment approaches, soaking in aqueous ammonia (SAA) and the Arkenol (strong sulfuric acid) process, were implemented at Sandia and used to generated suitable quantities of residue material from corn stover and eucalyptus feedstocks for subsequent thermochemical research. A third, novel technique, using ionic liquids (IL) was investigated by Sandia researchers at the Joint Bioenergy Institute (JBEI), but was not successful in isolating sufficient lignin residue. Additional residue material for thermochemical research was supplied from the dilute-acid simultaneous saccharification/fermentation (SSF) pilot-scale process at the National Renewable Energy Laboratory (NREL). The high-temperature volatiles yields of the different residues were measured, as were the char combustion reactivities. The residue chars showed slightly lower reactivity than raw biomass char, except for the SSF residue, which had substantially lower reactivity. Exergy analysis was applied to the NREL standard process design model for thermochemical ethanol production and from a prototypical dedicated biochemical process, with process data

Energy and environmental analysis of a rapeseed biorefinery conversion process

DEFF Research Database (Denmark)

Boldrin, Alessio; Balzan, Alberto; Astrup, Thomas Fruergaard

2013-01-01

)-based environmental assessment of a Danish biorefinery system was carried out to thoroughly analyze and optimize the concept and address future research. The LCA study was based on case-specific mass and energy balances and inventory data, and was conducted using consequential LCA approach to take into account market...... mechanisms determining the fate of products, lost opportunities and marginal productions. The results show that introduction of enzymatic transesterification and improved oil extraction procedure result in environmental benefits compared to a traditional process. Utilization of rapeseed straw seems to have...... positive effects on the greenhouse gases (GHG) footprint of the biorefinery system, with improvements in the range of 9 % to 29 %, depending on the considered alternative. The mass and energy balances showed the potential for improvement of straw treatment processes (hydrothermal pre-treatment and dark...

76 FR 13349 - Notice of Funding Availability (NOFA) for Repowering Assistance Payments to Eligible Biorefineries

Science.gov (United States)

2011-03-11

... Funding Availability (NOFA) for Repowering Assistance Payments to Eligible Biorefineries AGENCY: Rural... announces the acceptance of applications for payments to eligible biorefineries to encourage the use of... operation of these eligible biorefineries. To be eligible for payments, biorefineries must have been in...

Critical analysis of emerging forest biorefinery (FBR) technologies for ethanol production

International Nuclear Information System (INIS)

Cohen, J.; Janssen, M.; Chambost, V.; Stuart, P.

2010-01-01

This article provided a literature review of emerging technologies for ethanol production in Canada. A multi-criteria decision making (MCDM) panel was used to weigh critical metrics for evaluating the potential of emerging forest biorefinery technologies for bio-ethanol production. The 3-step methodology identified key factors for evaluating technology pathways. Key factors were applied to a group of selected technologies in order to collect data. All previous criteria were weighted through the MCDM panel in order to rank the technologies, which included biochemical pathway and thermochemical pathway production processes. Criteria included return on investment; feedstock flexibility; technology risk; energy and integration; products and revenue diversification; potential for additional products; and potential environmental impact. The study showed that techno-economic criteria are the most important barriers to the implementation of ethanol biorefineries. While thermochemical processes are economically feasible and provide greater flexibility, biochemical refining processes may provide for the development of other value-added products. 21 refs., 3 tabs., 7 figs.

Critical analysis of emerging forest biorefinery (FBR) technologies for ethanol production

Energy Technology Data Exchange (ETDEWEB)

Cohen, J.; Janssen, M.; Chambost, V.; Stuart, P. [Ecole Polytechnique, Montreal, PQ (Canada). Dept. de Genie Chimique. Design Engineering Chair in Process Integration

2010-05-15

This article provided a literature review of emerging technologies for ethanol production in Canada. A multi-criteria decision making (MCDM) panel was used to weigh critical metrics for evaluating the potential of emerging forest biorefinery technologies for bio-ethanol production. The 3-step methodology identified key factors for evaluating technology pathways. Key factors were applied to a group of selected technologies in order to collect data. All previous criteria were weighted through the MCDM panel in order to rank the technologies, which included biochemical pathway and thermochemical pathway production processes. Criteria included return on investment; feedstock flexibility; technology risk; energy and integration; products and revenue diversification; potential for additional products; and potential environmental impact. The study showed that techno-economic criteria are the most important barriers to the implementation of ethanol biorefineries. While thermochemical processes are economically feasible and provide greater flexibility, biochemical refining processes may provide for the development of other value-added products. 21 refs., 3 tabs., 7 figs.

Multi-Product Microalgae Biorefineries

NARCIS (Netherlands)

Lam, 't G.P.; Vermuë, M.H.; Eppink, M.H.M.; Wijffels, R.H.; Berg, van den C.

2018-01-01

Although microalgae are a promising biobased feedstock, industrial scale production is still far off. To enhance the economic viability of large-scale microalgae processes, all biomass components need to be valorized, requiring a multi-product biorefinery. However, this concept is still too

Synthesis of Optimal Processing Pathway for Microalgae-based Biorefinery under Uncertainty

DEFF Research Database (Denmark)

Rizwan, Muhammad; Lee, Jay H.; Gani, Rafiqul

2015-01-01

decision making, we propose a systematic framework for the synthesis and optimal design of microalgae-based processing network under uncertainty. By incorporating major uncertainties into the biorefinery superstructure model we developed previously, a stochastic mixed integer nonlinear programming (s......The research in the field of microalgae-based biofuels and chemicals is in early phase of the development, and therefore a wide range of uncertainties exist due to inconsistencies among and shortage of technical information. In order to handle and address these uncertainties to ensure robust......MINLP) problem is formulated for determining the optimal biorefinery structure under given parameter uncertainties modelled as sampled scenarios. The solution to the sMINLP problem determines the optimal decisions with respect to processing technologies, material flows, and product portfolio in the presence...

Water-based woody biorefinery.

Science.gov (United States)

Amidon, Thomas E; Liu, Shijie

2009-01-01

The conversion of biomass into chemicals and energy is essential in order to sustain our present way of life. Fossil fuels are currently the predominant energy source, but fossil deposits are limited and not renewable. Biomass is a reliable potential source of materials, chemicals and energy that can be replenished to keep pace with our needs. A biorefinery is a concept for the collection of processes used to convert biomass into materials, chemicals and energy. The biorefinery is a "catch and release" method for using carbon that is beneficial to both the environment and the economy. In this study, we discuss three elements of a wood-based biorefinery, as proposed by the SUNY College of Environmental Science and Forestry (ESF): hot-water extraction, hydrolysis, and membrane separation/concentration. Hemicelluloses are the most easily separable main component of woody biomass and thus form the bulk of the extracts obtained by hot-water extraction of woody biomass. Hot-water extraction is an important step in the processes of woody biomass and product generation, replacing alternative costly pre-treatment methods. The hydrolysis of hemicelluloses produces 5-carbon sugars (mainly xylose), 6-carbon sugars (mainly glucose and mannose), and acetic acid. The use of nano-filtration membranes is an efficient technology that can be employed to fractionate hot-water extracts and wood hydrolysate. The residual solid mass after hot-water extraction has a higher energy content and contains fewer easily degradable components. This allows for more efficient subsequent processing to convert cellulose and lignin into conventional products.

Downstream processing of Isochrysis galbana: a step towards microalgal biorefinery

NARCIS (Netherlands)

Gilbert-López, B.; Mendiola, J.A.; Fontecha, J.; Broek, van den L.A.M.; Sijtsma, L.; Cifuentes, A.; Herrero, M.; Ibáñez, E.

2015-01-01

An algae-based biorefinery relies on the efficient use of algae biomass through its fractionation of several valuable/bioactive compounds that can be used in industry. If this biorefinery includes green platforms as downstream processing technologies able to fulfill the requirements of green

The Civilisation Biorefinery - A Future Approach for Material and Energy Recovery from Regional Organic Waste

International Nuclear Information System (INIS)

Koerner, I.

2010-01-01

The future shortage of energy and raw materials as well as the problems on climate protection are challenges for which a solution is imperative. For efficient utilizing organic liquid and solid wastes which are generated in a city, a city itself could become a civilisation biorefinery. The output will be various energetic and material products, which can be used in the city or in the surrounding of the city. Depending on the nature of the various urban input materials, they need to be fed in to biorefineries adapted to the substrate type. The separate substrate-specific biorefineries may be at central or decentralised locations within the city. Moreover, since the residues from one system can be used in others as input, mutual networking is of importance. To facilitate efficient valorification, bioresources and the type of biorefinery need to be optimally matched. That also means that at the collection stage already, the material properties of the bioresource must be taken into account and where appropriate, new collection systems introduced, or consideration should be given to technical processes for separation of mixtures of materials. Extremely differing cascades will be appropriate for the various regional situations. For this reason, the evaluation of alternative schemes will be seen as very significant. Additional important points are the suitability of new measures or processes for integration into existing regional structures, as well as the logistics aspects, including the question of whether bioconversion processes should be conducted centrally or in decentralised locations. In Germany, considerable amounts of biowaste are available today and in the future which, until now, were almost entirely composted. The possibilities of anaerobic fermentation are gaining more and more in importance. Aerobic and anaerobic treatments of biowaste are more and more combined within the scope of a win-win situation. These technologies will be important parts of a

UTILIZATION OF AGROINDUSTRIALES RESIDUES AS BIOFUELS AND BIOREFINERY

Directory of Open Access Journals (Sweden)

Deyanira Muñoz-Muñoz

2014-12-01

Full Text Available The use of residues generated in the process agro-industrials are interest worldwide. At present, research is this in lignocellulosic biomass for energy, fuels, chemicals and biomaterials through clean technologies and closed systems that conserve the environment. In this research, based on the characteristics of the typical agro-industrial residues of Cauca Department, sugarcane bagasse, sisal dust, cassava bran and the mixtures, was evaluated use as biorefinery. Were determined the thermal, physical chemical and morphologic properties in seven samples of residues, were performed exploratory tests, were determined pretreatments and applications and the possible use were identified. We conclude that the sample M6 with 9,93 % moisture, 4,12% ash, 43,97% carbon, 5,86% hydrogen, 0,43% nitrogen, 15 MJ/kg of lower heating value and 22,25%of cellulose, 9,30% of hemicellulose and 4,56% lignin, presents characteristics appropriate to be used in furnaces and boilers less power for the rural sector by the amount of ash, which keeps the low heating power stable and reduces the emission of particulate matter. For the thermal, physical, chemical and morphological characteristics, all the samples of M1 to M7, they can be hydrolyzed, densified and taken advantage like biofuel and / or biorefinery

An integrated biorefinery concept for conversion of sugar beet pulp into value-added chemicals and pharmaceutical intermediates.

Science.gov (United States)

Cárdenas-Fernández, Max; Bawn, Maria; Hamley-Bennett, Charlotte; Bharat, Penumathsa K V; Subrizi, Fabiana; Suhaili, Nurashikin; Ward, David P; Bourdin, Sarah; Dalby, Paul A; Hailes, Helen C; Hewitson, Peter; Ignatova, Svetlana; Kontoravdi, Cleo; Leak, David J; Shah, Nilay; Sheppard, Tom D; Ward, John M; Lye, Gary J

2017-09-21

Over 8 million tonnes of sugar beet are grown annually in the UK. Sugar beet pulp (SBP) is the main by-product of sugar beet processing which is currently dried and sold as a low value animal feed. SBP is a rich source of carbohydrates, mainly in the form of cellulose and pectin, including d-glucose (Glu), l-arabinose (Ara) and d-galacturonic acid (GalAc). This work describes the technical feasibility of an integrated biorefinery concept for the fractionation of SBP and conversion of these monosaccharides into value-added products. SBP fractionation is initially carried out by steam explosion under mild conditions to yield soluble pectin and insoluble cellulose fractions. The cellulose is readily hydrolysed by cellulases to release Glu that can then be fermented by a commercial yeast strain to produce bioethanol at a high yield. The pectin fraction can be either fully hydrolysed, using physico-chemical methods, or selectively hydrolysed, using cloned arabinases and galacturonases, to yield Ara-rich and GalAc-rich streams. These monomers can be separated using either Centrifugal Partition Chromatography (CPC) or ultrafiltration into streams suitable for subsequent enzymatic upgrading. Building on our previous experience with transketolase (TK) and transaminase (TAm) enzymes, the conversion of Ara and GalAc into higher value products was explored. In particular the conversion of Ara into l-gluco-heptulose (GluHep), that has potential therapeutic applications in hypoglycaemia and cancer, using a mutant TK is described. Preliminary studies with TAm also suggest GluHep can be selectively aminated to the corresponding chiral aminopolyol. The current work is addressing the upgrading of the remaining SBP monomer, GalAc, and the modelling of the biorefinery concept to enable economic and Life Cycle Analysis (LCA).

Biofilm based attached cultivation technology for microalgal biorefineries-A review.

Science.gov (United States)

Wang, Junfeng; Liu, Wen; Liu, Tianzhong

2017-11-01

The attached cultivation for microalga has many superiorities over the conventional aqua-suspend methods, which make it a promising pathway to supply feedstock for microalgae based bio-refinery attempts. In this review, the current reports on bioreactor, application, modeling, substratum material and engineering aspects were summarized and the future research and developments should be focused on the following aspects: 1) Build principles and guidelines for rational structure design by studying the relationship of physiological properties with typical structures and light regimes; 2) Set up theory foundation of substratum material selection by studying the physic-chemical properties of algal cells and substratum materials; 3) Further understanding the mass transfer behaviors of both CO 2 and nutrients in biofilm for enhanced growth rate and products accumulation; 4) New equipment and machines for inoculation, harvesting and moisture keeping should be developed and integrated with bioreactor structure. Copyright © 2017 Elsevier Ltd. All rights reserved.

Ethanol production from rape straw: Part of an oilseed rape biorefinery

DEFF Research Database (Denmark)

Arvaniti, Efthalia

The aim of this study was 1) present an oilseed rape whole crop biorefinery; 2) to investigate the best available experimental conditions for production of cellulosic ethanol from rape straw, and included the processes of thermo-chemical pretreatment, enzymatic hydrolysis, and C6 fermentation......, and 3) to couple cellulosic ethanol production to production of cellulolytic enzymes that are needed for cellulosic ethanol production, inside a rape straw biorefinery. For the first is based less on available experiments, and more on literature review. The second and third study conclusions were drawn...... rapeseed biodiesel plant of Europe to an oilseed rape whole-crop biorefinery by 2020 is envisioned and discussed. The description and discussion of this biorefinery is based partly on literature review, and partly on own experimental data, especially on pretreatment of rape straw, and production...

Utilization of Ionic Liquids in Lignocellulose Biorefineries as Agents for Separation, Derivatization, Fractionation, or Pretreatment.

Science.gov (United States)

Peleteiro, Susana; Rivas, Sandra; Alonso, José L; Santos, Valentín; Parajó, Juan C

2015-09-23

Ionic liquids (ILs) can play multiple roles in lignocellulose biorefineries, including utilization as agents for the separation of selected compounds or as reaction media for processing lignocellulosic materials (LCM). Imidazolium-based ILs have been proposed for separating target components from LCM biorefinery streams, for example, the dehydration of ethanol-water mixtures or the extractive separation of biofuels (ethanol, butanol) or lactic acid from the respective fermentation broths. As in other industries, ILs are potentially suitable for removing volatile organic compounds or carbon dioxide from gaseous biorefinery effluents. On the other hand, cellulose dissolution in ILs allows homogeneous derivatization reactions to be carried out, opening new ways for product design or for improving the quality of the products. Imidazolium-based ILs are also suitable for processing native LCM, allowing the integral benefit of the feedstocks via separation of polysaccharides and lignin. Even strongly lignified materials can yield cellulose-enriched substrates highly susceptible to enzymatic hydrolysis upon ILs processing. Recent developments in enzymatic hydrolysis include the identification of ILs causing limited enzyme inhibition and the utilization of enzymes with improved performance in the presence of ILs.

Energy Opportunities from Lignocellulosic Biomass for a Biorefinery Case Study

Directory of Open Access Journals (Sweden)

Franco Cotana

2016-09-01

Full Text Available This work presents some energy considerations concerning a biorefinery case study that has been carried out by the CRB/CIRIAF of the University of Perugia. The biorefinery is the case study of the BIT3G project, a national funded research project, and it uses the lignocellulosic biomass that is available in the territory as input materials for biochemical purposes, such as cardoon and carthamus. The whole plant is composed of several sections: the cardoon and carthamus seed milling, the oil refinement facilities, and the production section of some high quality biochemicals, i.e., bio-oils and fatty acids. The main goal of the research is to demonstrate energy autonomy of the latter section of the biorefinery, while only recovering energy from the residues resulting from the collection of the biomass. To this aim, this work presents the quantification of the energy requirements to be supplied to the considered biorefinery section, the mass flow, and the energy and chemical characterization of the biomass. Afterwards, some sustainability strategies have been qualitatively investigated in order to identify the best one to be used in this case study; the combined heat and power (CHP technology. Two scenarios have been defined and presented: the first with 6 MWt thermal input and 1.2 MWe electrical power as an output and the second with 9 MWt thermal input and 1.8 MWe electrical power as an output. The first scenario showed that 11,000 tons of residual biomass could ensure the annual production of about 34,000 MWht, equal to about the 72% of the requirements, and about 9600 MWhe, equal to approximately 60% of the electricity demand. The second scenario showed that 18,000 tons of the residual biomass could ensure the total annual production of about 56,000 MWht, corresponding to more than 100% of the requirements, and about 14,400 MWhe, equal to approximately 90% of the electricity demand. In addition, the CO2 emissions from the energy valorization

Bridging the gap between feedstock growers and users: the study of a coppice poplar-based biorefinery.

Science.gov (United States)

Dou, Chang; Gustafson, Rick; Bura, Renata

2018-01-01

In the biofuel industry, land productivity is important to feedstock growers and conversion process product yield is important to the biorefinery. The crop productivity, however, may not positively correlate with bioconversion yield. Therefore, it is important to evaluate sugar yield and biomass productivity. In this study, 2-year-old poplar trees harvested in the first coppice cycle, including one low-productivity hybrid and one high-productivity hybrid, were collected from two poplar tree farms. Through steam pretreatment and enzymatic hydrolysis, the bioconversion yields of low- and high-productivity poplar hybrids were compared for both sites. The low-productivity hybrids had 9-19% higher sugar yields than the high-productivity hybrids, although they have the similar chemical composition. Economic calculations show the impact on the plantation and biorefinery of using the two feedstocks. Growing a high-productivity hybrid means the land owner would use 11-26% less land (which could be used for other crops) or collect $2.53-$3.46 MM/year extra revenue from the surplus feedstock. On the other side, the biorefinery would receive 5-10% additional revenue using the low-productivity hybrid. We propose a business model based on the integration of the plantation and the biorefinery. In this model, different feedstocks are assessed using a metric of product tonnage per unit land per year. Use of this new economic metric bridges the gap between feedstock growers and users to maximize the overall production efficiency.

Biorefinery of the brown seaweed Saccharina latissima for fuels and chemicals

NARCIS (Netherlands)

Lopez Contreras, A.M.; Harmsen, P.F.H.; Blaauw, R.; Houweling-Tan, G.B.N.; Wal, van der H.; Huijgen, W.J.J.; Hal, van J.W.

2014-01-01

Seaweeds (also called macroalgae) are considered a potential biomass feedstock for biorefineries for production of energy and chemicals. In this study, a biorefinery strategy for the brown seaweed Saccharina latissima is described. Fresh S. latissima harvested at the Irish coast contained glucose

Biological potential of microalgae in China for biorefinery-based production of biofuels and high value compounds.

Science.gov (United States)

Li, Jingjing; Liu, Ying; Cheng, Jay J; Mos, Michal; Daroch, Maurycy

2015-12-25

Microalgae abundance and diversity in China shows promise for identifying suitable strains for developing algal biorefinery. Numerous strains of microalgae have already been assessed as feedstocks for bioethanol and biodiesel production, but commercial scale algal biofuel production is yet to be demonstrated, most likely due to huge energy costs associated with algae cultivation, harvesting and processing. Biorefining, integrated processes for the conversion of biomass into a variety of products, can improve the prospects of microalgal biofuels by combining them with the production of high value co-products. Numerous microalgal strains in China have been identified as producers of various high value by-products with wide application in the medicine, food, and cosmetics industries. This paper reviews microalgae resources in China and their potential in producing liquid biofuels (bioethanol and biodiesel) and high value products in an integrated biorefinery approach. Implementation of a 'high value product first' principle should make the integrated process of fuels and chemicals production economically feasible and will ensure that public and private interest in the development of microalgal biotechnology is maintained. Copyright © 2015 Elsevier B.V. All rights reserved.

Drivers and barriers for implementation of the biorefinery

International Nuclear Information System (INIS)

Janssen, M.; Stuart, P.

2010-01-01

This paper discussed the barriers and drivers for the implementation of biorefinery technology in the forestry industry. A multi-criteria decision making (MCDM) methodology was used by a panel of industry experts. The objective, drivers and barriers, and the decision structure and weighting procedure were established during a pre-panel phase. An analytic hierarchy process (AHP) was then applied to compare qualitative criteria. Pair-wise criteria were used to determine the importance of each driver and barrier. Drivers for the implementation of biorefineries included the opportunity to ensure short-term profitability; the provision of raw materials at competitive prices; potential financial incentives; and the opportunity to transform the forestry business model and increase its market value. Barriers included uncertainty in relation to government policies for biorefineries; high technology risks; the need for partnerships; and the fact that many industry members favour short-term decision-making. Results of the study showed that the most significant barrier was related to risk. 5 refs., 3 tabs., 3 figs.

76 FR 13351 - Notice of Funds Availability (NOFA) Inviting Applications for the Biorefinery Assistance Program

Science.gov (United States)

2011-03-11

... commercial-scale biorefineries or for the retrofitting of existing facilities using eligible technology for... biorefineries and the retrofitting of existing facilities using eligible technology for the development of... provide for the development, construction, and/or retrofitting of commercial biorefineries using eligible...

Possibilities for sustainable biorefineries based on agricultural residues – A case study of potential straw-based ethanol production in Sweden

International Nuclear Information System (INIS)

Ekman, Anna; Wallberg, Ola; Joelsson, Elisabeth; Börjesson, Pål

2013-01-01

Highlights: ► Biorefineries can produce ethanol, biogas, heat and power efficiently with profit. ► Location of plant is decided by raw material supply in the region. ► Increased production of high value compounds affects profitability. ► Energy efficiency is increased by availability of heat sinks. ► Several locations may be suitable for construction of a biorefinery plant. -- Abstract: This study presents a survey of the most important techno-economic factors for the implementation of biorefineries based on agricultural residues, in the form of straw, and biochemical conversion into ethanol and biogas, together with production of electricity and heat. The paper suggests locations where the necessary conditions can be met in Sweden. The requirements identified are regional availability of feedstock, the possibility to integrate with external heat sinks, appropriate process design and the scale of the plant. The scale of the plant should be adapted to the potential, regional, raw-material supply, but still be large enough to give economies of scale. The integration with heat sinks proved to be most important to achieve high energy-efficiency, but it was of somewhat less importance for the profitability. Development of pentose fermentation, leading to higher ethanol yields, was important to gain high profitability. Promising locations were identified in the county of Östergötland where integration with an existing 1st generation ethanol plant and district heating systems (DHSs) is possible, and in the county of Skåne where both a significant, potential straw supply and integration potential with DHSs are available.

Cell disruption for microalgae biorefineries

NARCIS (Netherlands)

Günerken, E.; Hondt, d' E.; Eppink, M.H.M.; Garcia-Gonzalez, L.; Elst, K.; Wijffels, R.H.

2015-01-01

Microalgae are a potential source for various valuable chemicals for commercial applications ranging from nutraceuticals to fuels. Objective in a biorefinery is to utilize biomass ingredients efficiently similarly to petroleum refineries in which oil is fractionated in fuels and a variety of

Design of an Optimal Biorefinery

DEFF Research Database (Denmark)

Nawaz, Muhammad; Zondervan, Edwin; Woodley, John

2011-01-01

In this paper we propose a biorefinery optimization model that can be used to find the optimal processing route for the production of ethanol, butanol, succinic acid and blends of these chemicals with fossil fuel based gasoline. The approach unites transshipment models with a superstructure...

Location-dependent optimal biorefinery synthesis

DEFF Research Database (Denmark)

Bertran, Maria-Ona; Woodley, John M.; Gani, Rafiqul

2017-01-01

In this paper, we present an extended framework for synthesis of biorefinery networks. The extension of the framework responds to the needs of: automatically generating problem-specific superstructures from an in-house database in an efficient and reliable way, as well as obtaining and analysing...

Perspectives on the production of polyhydroxyalkanoates in biorefineries associated with the production of sugar and ethanol.

Science.gov (United States)

Silva, Luiziana Ferreira; Taciro, Marilda Keico; Raicher, Gil; Piccoli, Rosane Aparecida Moniz; Mendonça, Thatiane Teixeira; Lopes, Mateus Schreiner Garcez; Gomez, José Gregório Cabrera

2014-11-01

Polyhydroxyalkanoates (PHA) are biodegradable and biocompatible bacterial thermoplastic polymers that can be obtained from renewable resources. The high impact of the carbon source in the final cost of this polymer has been one of the major limiting factors for PHA production and agricultural residues, mainly lignocellulosic materials, have gained attention to overcome this problem. In Brazil, production of 2nd generation ethanol from the glucose fraction, derived from sugarcane bagasse hydrolysate has been studied. The huge amounts of remaining xylose will create an opportunity for the development of other bioprocesses, generating new products to be introduced into a biorefinery model. Although PHA production from sucrose integrated to a 1G ethanol and sugar mill has been proposed in the past, the integration of the process of 2G ethanol in the context of a biorefinery will provide enormous amounts of xylose, which could be applied to produce PHA, establishing a second-generation of PHA production process. Those aspects and perspectives are presented in this article. Copyright © 2014 Elsevier B.V. All rights reserved.

Toward a Computer-Aided Synthesis and Design of Biorefinery Networks: Data Collection and Management Using a Generic Modeling Approach

DEFF Research Database (Denmark)

Cheali, Peam; Gernaey, Krist; Sin, Gürkan

2014-01-01

that are needed among others to support the superstructure-based optimization studies. To this end, we first formulate an integrated thermochemical and biochemical biorefinery superstructure and then use a generic modeling approach to represent each processing technology in the superstructure. The generic model...

Forest biorefinery: Potential of poplar phytochemicals as value-added co-products.

Science.gov (United States)

Devappa, Rakshit K; Rakshit, Sudip K; Dekker, Robert F H

2015-11-01

The global forestry industry after experiencing a market downturn during the past decade has now aimed its vision towards the integrated biorefinery. New business models and strategies are constantly being explored to re-invent the global wood and pulp/paper industry through sustainable resource exploitation. The goal is to produce diversified, innovative and revenue generating product lines using on-site bioresources (wood and tree residues). The most popular product lines are generally produced from wood fibers (biofuels, pulp/paper, biomaterials, and bio/chemicals). However, the bark and other tree residues like foliage that constitute forest wastes, still remain largely an underexploited resource from which extractives and phytochemicals can be harnessed as by-products (biopharmaceuticals, food additives and nutraceuticals, biopesticides, cosmetics). Commercially, Populus (poplar) tree species including hybrid varieties are cultivated as a fast growing bioenergy crop, but can also be utilized to produce bio-based chemicals. This review identifies and underlines the potential of natural products (phytochemicals) from Populus species that could lead to new business ventures in biorefineries and contribute to the bioeconomy. In brief, this review highlights the importance of by-products/co-products in forest industries, methods that can be employed to extract and purify poplar phytochemicals, the potential pharmaceutical and other uses of >160 phytochemicals identified from poplar species - their chemical structures, properties and bioactivities, the challenges and limitations of utilizing poplar phytochemicals, and potential commercial opportunities. Finally, the overall discussion and conclusion are made considering the recent biotechnological advances in phytochemical research to indicate the areas for future commercial applications from poplar tree species. Crown Copyright © 2015. Published by Elsevier Inc. All rights reserved.

Integration of Biorefineries and Nuclear Cogeneration Power Plants - A Preliminary Analysis

Energy Technology Data Exchange (ETDEWEB)

Greene, Sherrell R [ORNL; Flanagan, George F [ORNL; Borole, Abhijeet P [ORNL

2009-03-01

Biomass-based ethanol and nuclear power are two viable elements in the path to U.S. energy independence. Numerous studies suggest nuclear power could provide a practical carbon-free heat source alternative for the production of biomass-based ethanol. In order for this coupling to occur, it is necessary to examine the interfacial requirements of both nuclear power plants and bioethanol refineries. This report describes the proposed characteristics of a small cogeneration nuclear power plant, a biochemical process-based cellulosic bioethanol refinery, and a thermochemical process-based cellulosic biorefinery. Systemic and interfacial issues relating to the co-location of either type of bioethanol facility with a nuclear power plant are presented and discussed. Results indicate future co-location efforts will require a new optimized energy strategy focused on overcoming the interfacial challenges identified in the report.

Integration of Biorefineries and Nuclear Cogeneration Power Plants - A Preliminary Analysis

International Nuclear Information System (INIS)

Greene, Sherrell R.; Flanagan, George F.; Borole, Abhijeet P.

2009-01-01

Biomass-based ethanol and nuclear power are two viable elements in the path to U.S. energy independence. Numerous studies suggest nuclear power could provide a practical carbon-free heat source alternative for the production of biomass-based ethanol. In order for this coupling to occur, it is necessary to examine the interfacial requirements of both nuclear power plants and bioethanol refineries. This report describes the proposed characteristics of a small cogeneration nuclear power plant, a biochemical process-based cellulosic bioethanol refinery, and a thermochemical process-based cellulosic biorefinery. Systemic and interfacial issues relating to the co-location of either type of bioethanol facility with a nuclear power plant are presented and discussed. Results indicate future co-location efforts will require a new optimized energy strategy focused on overcoming the interfacial challenges identified in the report.

Biorefineries: Relocating Biomass Refineries to the Rural Area

Directory of Open Access Journals (Sweden)

Franka Papendiek

2012-07-01

Full Text Available The field for application of biomass is rising. The demand for food and feeding stuff rises while at the same time energy, chemicals and other materials also need to be produced from biomass because of decreasing fossil resources. However, the biorefinery ideas and concepts can help to use the limited renewable raw materials more efficiently than today. With biorefineries, valuable products, such as platform chemicals, can be produced from agricultural feedstock, which can subsequently be further processed into a variety of substances by the chemical industry. Due to the role they play as producers of biomass, rural areas will grow in importance in the decades to come. Parts of the biorefinery process can be relocated to the rural areas to bring a high added value to these regions. By refining biomass at the place of production, new economic opportunities may arise for agriculturists, and the industry gets high-grade pre-products. Additionally, an on-farm refining can increase the quality of the products because of the instant processing. To reduce competition with the food production and to find new possibilities of utilisation for these habitats, the focus for new agricultural biomass should be on grasslands. But also croplands can provide more renewable raw materials without endangering a sustainable agriculture, e.g. by implementing legumes in the crop rotation. To decide if a region can provide adequate amounts of raw material for a biorefinery, new raw material assessment procedures have to be developed. In doing so, involvement of farmers is inevitable to generate a reliable study of the biomass refinery potentials.

Transportation fuel production from gasified biomass integrated with a pulp and paper mill – Part A: Heat integration and system performance

International Nuclear Information System (INIS)

Isaksson, Johan; Jansson, Mikael; Åsblad, Anders; Berntsson, Thore

2016-01-01

Production of transportation fuels from biorefineries via biomass gasification has been suggested as a way of introducing renewable alternatives in the transportation system with an aim to reduce greenhouse gas emissions to the atmosphere. By co-locating gasification-based processes within heat demanding industries, excess heat from the gasification process can replace fossil or renewable fuels. The objective of this study was to compare the heat integration potential of four different gasification-based biorefinery concepts with a chemical pulp and paper mill. The results showed that the choice of end-product which was either methanol, Fischer-Tropsch crude, synthetic natural gas or electricity, can have significant impact on the heat integration potential with a pulp and paper mill and that the heat saving measures implemented in the mill in connection to integration of a gasification process can increase the biomass resource efficiency by up to 3%-points. Heat saving measures can reduce the necessary biomass input to the biorefinery by 50% if the sizing constraint is to replace the bark boiler with excess heat from the biorefinery. A large integrated gasification process with excess steam utilisation in a condensing turbine was beneficial only if grid electricity is produced at below 30% electrical efficiency. - Highlights: • Biomass gasification integrated with a pulp and paper mill. • Different sizing constraints of integrated biofuel production. • The biofuel product largely influence the heat integration potential. • An oversized gasifier for increased power production could be favourable.

Economically Viable Components from Jerusalem Artichoke (Helianthus tuberosus L.) in a Biorefinery Concept

DEFF Research Database (Denmark)

Johansson, Eva; Prade, Thomas; Angelidaki, Irini

2015-01-01

Biorefinery applications are receiving growing interest due to climatic and waste disposal issues and lack of petroleum resources. Jerusalem artichoke (Helianthus tuberosus L.) is suitable for biorefinery applications due to high biomass production and limited cultivation requirements. This paper...... focuses on the potential of Jerusalem artichoke as a biorefinery crop and the most viable products in such a case. The carbohydrates in the tubers were found to have potential for production of platform chemicals, e.g., succinic acid. However, economic analysis showed that production of platform chemicals...

Crop residues as raw materials for biorefinery systems - A LCA case study

International Nuclear Information System (INIS)

Cherubini, Francesco; Ulgiati, Sergio

2010-01-01

Our strong dependence on fossil fuels results from the intensive use and consumption of petroleum derivatives which, combined with diminishing oil resources, causes environmental and political concerns. The utilization of agricultural residues as raw materials in a biorefinery is a promising alternative to fossil resources for production of energy carriers and chemicals, thus mitigating climate change and enhancing energy security. This paper focuses on a biorefinery concept which produces bioethanol, bioenergy and biochemicals from two types of agricultural residues, corn stover and wheat straw. These biorefinery systems are investigated using a Life Cycle Assessment (LCA) approach, which takes into account all the input and output flows occurring along the production chain. This approach can be applied to almost all the other patterns that convert lignocellulosic residues into bioenergy and biochemicals. The analysis elaborates on land use change aspects, i.e. the effects of crop residue removal (like decrease in grain yields, change in soil N 2 O emissions and decrease of soil organic carbon). The biorefinery systems are compared with the respective fossil reference systems producing the same amount of products/services from fossils instead of biomass. Since climate change mitigation and energy security are the two most important driving forces for biorefinery development, the assessment focuses on greenhouse gas (GHG) emissions and cumulative primary energy demand, but other environmental categories are evaluated as well. Results show that the use of crop residues in a biorefinery saves GHG emissions and reduces fossil energy demand. For instance, GHG emissions are reduced by about 50% and more than 80% of non-renewable energy is saved. Land use change effects have a strong influence in the final GHG balance (about 50%), and their uncertainty is discussed in a sensitivity analysis. Concerning the investigation of the other impact categories, biorefinery systems

Economically viable biochemical processes for the advanced rural biorefinery and downstream recovery operations

Science.gov (United States)

Rural biorefineries offer an alternative to traditional ethanol production by providing the opportunity to produce fuel on site to reduce costs associated with biomass transportation thus making the fuel economically viable. Widespread installation of rural biorefineries could lead to increased upt...

Lignin pyrolysis for profitable lignocellulosic biorefineries

NARCIS (Netherlands)

Wild, de P.J.; Gosselink, R.J.A.; Huijgen, W.J.J.

2014-01-01

Bio-based industries (pulp and paper and biorefineries) produce > 50 Mt/yr of lignin that results from fractionation of lignocellulosic biomass. Lignin is world's second biopolymer and a major potential source for production of performance materials and aromatic chemicals. Lignin valorization is

Fumaric Acid Production: A Biorefinery Perspective

Directory of Open Access Journals (Sweden)

Victor Martin-Dominguez

2018-05-01

Full Text Available The increasing scarcity of fossil raw materials, together with the need to develop new processes and technology based on renewable sources, and the need to dispose of an increasing amount of biomass-derived waste, have boosted the concept of biorefineries. Both 1G and 2G biorefineries are focused on the obtention of biofuels, chemicals, materials, food and feed from biomass, a renewable resource. Fumaric acid, and most compounds involved in the Kreb cycle, are considered key platform chemicals, not only for being acidulants and additives in the food industry, but also for their prospective use as monomers. This review is focused on the biotechnological processes based on fungi, mainly of the Rhizopus genus, whose main product is fumaric acid, on the process conditions, the bioreactors and modes of operation and on the purification of the acid once it is produced.

Development of an Energy Biorefinery Model for Chestnut (Castanea sativa Mill. Shells

Directory of Open Access Journals (Sweden)

Alessandra Morana

2017-09-01

Full Text Available Chestnut shells (CS are an agronomic waste generated from the peeling process of the chestnut fruit, which contain 2.7–5.2% (w/w phenolic compounds and approximately 36% (w/w polysaccharides. In contrast with current shell waste burning practices, this study proposes a CS biorefinery that integrates biomass pretreatment, recovery of bioactive molecules, and bioconversion of the lignocellulosic hydrolyzate, while optimizing materials reuse. The CS delignification and saccharification produced a crude hydrolyzate with 12.9 g/L of glucose and xylose, and 682 mg/L of gallic acid equivalents. The detoxification of the crude CS hydrolyzate with 5% (w/v activated charcoal (AC and repeated adsorption, desorption and AC reuse enabled 70.3% (w/w of phenolic compounds recovery, whilst simultaneously retaining the soluble sugars in the detoxified hydrolyzate. The phenols radical scavenging activity (RSA of the first AC eluate reached 51.8 ± 1.6%, which is significantly higher than that of the crude CS hydrolyzate (21.0 ± 1.1%. The fermentation of the detoxified hydrolyzate by C. butyricum produced 10.7 ± 0.2 mM butyrate and 63.9 mL H2/g of CS. Based on the obtained results, the CS biorefinery integrating two energy products (H2 and calorific power from spent CS, two bioproducts (phenolic compounds and butyrate and one material reuse (AC reuse constitutes a valuable upgrading approach for this yet unexploited waste biomass.

Integrated cellulosic enzymes hydrolysis and fermentative advanced yeast bioconversion solution ready for biomass biorefineries

Energy Technology Data Exchange (ETDEWEB)

Kumar, Manoj [DSM Innovation, Inc., San Francisco, CA (United States)

2011-05-04

These are slides from this conference. Lignocellulosic biomass is the most abundant, least expensive renewable natural biological resource for the production of biobased products and bioenergy is important for the sustainable development of human civilization in 21st century. For making the fermentable sugars from lignocellulosic biomass, a reduction in cellulase production cost, an improvement in cellulase performance, and an increase in sugar yields are all vital to reduce the processing costs of biorefineries. Improvements in specific cellulase activities for non-complexed cellulase mixtures can be implemented through cellulase engineering based on rational design or directed evolution for each cellulase component enzyme, as well as on the reconstitution of cellulase components. In this paper, we will provide DSM's efforts in cellulase research and developments and focus on limitations. Cellulase improvement strategies based on directed evolution using screening on relevant substrates, screening for higher thermal tolerance based on activity screening approaches such as continuous culture using insoluble cellulosic substrates as a powerful selection tool for enriching beneficial cellulase mutants from the large library. We will illustrate why and how thermostable cellulases are vital for economic delivery of bioproducts from cellulosic biomass using biochemical conversion approach.

Comparative cradle-to-grave life cycle assessment of biogas production from marine algae and cattle manure biorefineries.

Science.gov (United States)

Giwa, Adewale

2017-11-01

The environmental impacts resulting from the cradle-to-grave life cycles of Enteromorpha prolifera macroalgae and cattle manure biorefineries are assessed and compared. Sensitivity analysis is carried out to evaluate the response of the impacts to changes in biogas application by using Simapro 7.3.3. Three scenarios are considered in the biorefineries. In the first and second scenarios, the biogas produced is considered to be used for electricity production and transportation, respectively. In the third scenario, the biogas is considered to be recycled back to the systems. Process energy requirements and transportation of inputs contribute the largest share of the overall impacts. The cattle manure biorefinery is slightly more eco-friendly than the macroalgae biorefinery in Scenarios 1 and 2 because it requires more eco-friendly inputs. However, the macroalgae biorefinery becomes more eco-friendly than the cattle manure biorefinery in Scenario 3 because macroalgae require less energy and water for biogas production. Copyright © 2017 Elsevier Ltd. All rights reserved.

Improving Energy Efficiency and Enabling Water Recycle in Biorefineries Using Bioelectrochemical Cells

International Nuclear Information System (INIS)

Borole, Abhijeet P.

2010-01-01

Improving biofuel yield and water reuse are two important issues in further development of biorefineries. The total energy content of liquid fuels (including ethanol and hydrocarbon) produced from cellulosic biomass via biochemical or hybrid bio-thermochemical routes can vary from 49% to 70% of the biomass entering the biorefinery, on an energy basis. Use of boiler for combustion of residual organics and lignin results in significant energy and water losses. An alternate process to improve energy recovery from the residual organic streams is via use of bioelectrochemical systems such as microbial fuel cells (MFCs) microbial electrolysis cells (MECs). The potential advantages of this alternative scheme in a biorefinery include minimization of heat loss and generation of a higher value product, hydrogen. The need for 5-15 gallons of water per gallon of ethanol can be reduced significantly via recycle of water after MEC treatment. Removal of inhibitory byproducts such as furans, phenolics and acetate in MFC/MECs to generate energy, thus, has dual advantages including improvements in energy efficiency and ability to recycle water. Conversion of the sugar- and lignin- degradation products to hydrogen is synergistic with biorefinery hydrogen requirements for upgrading F-T liquids and other byproducts to high-octane fuels and/or high value products. Some of these products include sorbitol, succinic acid, furan and levulinate derivatives, glycols, polyols, 1,4-butenadiol, phenolics polymers, etc. Potential process alternatives utilizing MECs in biorefineries capable of improving energy efficiency by up to 30% are discussed.

Biodiesel biorefinery: opportunities and challenges for microbial production of fuels and chemicals from glycerol waste.

Science.gov (United States)

Almeida, João R M; Fávaro, Léia C L; Quirino, Betania F

2012-07-18

The considerable increase in biodiesel production worldwide in the last 5 years resulted in a stoichiometric increased coproduction of crude glycerol. As an excess of crude glycerol has been produced, its value on market was reduced and it is becoming a "waste-stream" instead of a valuable "coproduct". The development of biorefineries, i.e. production of chemicals and power integrated with conversion processes of biomass into biofuels, has been singled out as a way to achieve economically viable production chains, valorize residues and coproducts, and reduce industrial waste disposal. In this sense, several alternatives aimed at the use of crude glycerol to produce fuels and chemicals by microbial fermentation have been evaluated. This review summarizes different strategies employed to produce biofuels and chemicals (1,3-propanediol, 2,3-butanediol, ethanol, n-butanol, organic acids, polyols and others) by microbial fermentation of glycerol. Initially, the industrial use of each chemical is briefly presented; then we systematically summarize and discuss the different strategies to produce each chemical, including selection and genetic engineering of producers, and optimization of process conditions to improve yield and productivity. Finally, the impact of the developments obtained until now are placed in perspective and opportunities and challenges for using crude glycerol to the development of biodiesel-based biorefineries are considered. In conclusion, the microbial fermentation of glycerol represents a remarkable alternative to add value to the biodiesel production chain helping the development of biorefineries, which will allow this biofuel to be more competitive.

Controlling accumulation of fermentation inhibitors in biorefinery recycle water using microbial fuel cells

Directory of Open Access Journals (Sweden)

Vishnivetskaya Tatiana A

2009-04-01

Full Text Available Abstract Background Microbial fuel cells (MFC and microbial electrolysis cells are electrical devices that treat water using microorganisms and convert soluble organic matter into electricity and hydrogen, respectively. Emerging cellulosic biorefineries are expected to use large amounts of water during production of ethanol. Pretreatment of cellulosic biomass results in production of fermentation inhibitors which accumulate in process water and make the water recycle process difficult. Use of MFCs to remove the inhibitory sugar and lignin degradation products from recycle water is investigated in this study. Results Use of an MFC to reduce the levels of furfural, 5-hydroxymethylfurfural, vanillic acid, 4-hydroxybenzaldehyde and 4-hydroxyacetophenone while simultaneously producing electricity is demonstrated here. An integrated MFC design approach was used which resulted in high power densities for the MFC, reaching up to 3700 mW/m2 (356 W/m3 net anode volume and a coulombic efficiency of 69%. The exoelectrogenic microbial consortium enriched in the anode was characterized using a 16S rRNA clone library method. A unique exoelectrogenic microbial consortium dominated by δ-Proteobacteria (50%, along with β-Proteobacteria (28%, α-Proteobacteria (14%, γ-Proteobacteria (6% and others was identified. The consortium demonstrated broad substrate specificity, ability to handle high inhibitor concentrations (5 to 20 mM with near complete removal, while maintaining long-term stability with respect to power production. Conclusion Use of MFCs for removing fermentation inhibitors has implications for: 1 enabling higher ethanol yields at high biomass loading in cellulosic ethanol biorefineries, 2 improved water recycle and 3 electricity production up to 25% of total biorefinery power needs.

Integration of a kraft pulping mill into a forest biorefinery: pre-extraction of hemicellulose by steam explosion versus steam treatment.

Science.gov (United States)

Martin-Sampedro, Raquel; Eugenio, Maria E; Moreno, Jassir A; Revilla, Esteban; Villar, Juan C

2014-02-01

Growing interest in alternative and renewable energy sources has brought increasing attention to the integration of a pulp mill into a forest biorefinery, where other products could be produced in addition to pulp. To achieve this goal, hemicelluloses were extracted, either by steam explosion or by steam treatment, from Eucalyptus globulus wood prior to pulping. The effects of both pre-treatments in the subsequent kraft pulping and paper strength were evaluated. Results showed a similar degree of hemicelluloses extraction with both options (32-67% of pentosans), which increased with the severity of the conditions applied. Although both pre-treatments increased delignification during pulping, steam explosion was significantly better: 12.9 kappa number vs 22.6 for similar steam unexploded pulps and 40.7 for control pulp. Finally, similar reductions in paper strength were found regardless of the type of treatment and conditions assayed, which is attributed to the increase of curled and kinked fibers. Copyright © 2013 Elsevier Ltd. All rights reserved.

Synthesis and Design of Biorefinery Processing Networks with Uncertainty and Sustainability analysis

DEFF Research Database (Denmark)

Cheali, Peam; Gernaey, Krist; Sin, Gürkan

combinations of processing networks. The optimization of the network is formulated as a mixed integer nonlinear programming type of problem and solved in GAMS. The methodology was applied for designing optimal biorefinery networks considering biochemical routes. Furthermore, the methodology has also been...... for processing renewable feedstocks, with the aim of bridging the gap for fuel, chemical and material production. This project is focusing on biorefinery network design, in particular for early stage design and development studies. Optimal biorefinery design is a challenging problem. It is a multi......-objective decision-making problem not only with respect to technical and economic feasibility but also with respect to environmental impacts, sustainability constraints and limited availability & uncertainties of input data at the early design stage. It is therefore useful to develop a systematic methodology...

Vertical Integration of Biomass Saccharification of Enzymes for Sustainable Cellulosic Biofuel Production in a Biorefinery

Energy Technology Data Exchange (ETDEWEB)

Kumar, Manoj [DSM Innovation, Inc., San Francisco, CA (United States)

2011-05-09

These are a set of slides from this conference. Lignocellulosic biomass is the most abundant, least expensive renewable natural biological resource for the production of biobased products and bioenergy is important for the sustainable development of human civilization in 21st century. For making the fermentable sugars from lignocellulosic biomass, a reduction in cellulase production cost, an improvement in cellulase performance, and an increase in sugar yields are all vital to reduce the processing costs of biorefineries. Improvements in specific cellulase activities for non-complexed cellulase mixtures can be implemented through cellulase engineering based on rational design or directed evolution for each cellulase component enzyme, as well as on the reconstitution of cellulase components. In this paper, we will provide DSM's efforts in cellulase research and developments and focus on limitations. Cellulase improvement strategies based on directed evolution using screening on relevant substrates, screening for higher thermal tolerance based on activity screening approaches such as continuous culture using insoluble cellulosic substrates as a powerful selection tool for enriching beneficial cellulase mutants from the large library. We will illustrate why and how thermostable cellulases are vital for economic delivery of bioproducts from cellulosic biomass using biochemical conversion approach.

Impact of trucking network flow on preferred biorefinery locations in the southern United States

Science.gov (United States)

Timothy M. Young; Lee D. Han; James H. Perdue; Stephanie R. Hargrove; Frank M. Guess; Xia Huang; Chung-Hao Chen

2017-01-01

The impact of the trucking transportation network flow was modeled for the southern United States. The study addresses a gap in existing research by applying a Bayesian logistic regression and Geographic Information System (GIS) geospatial analysis to predict biorefinery site locations. A one-way trucking cost assuming a 128.8 km (80-mile) haul distance was estimated...

Liquefaction of Biorefinery Lignin for Fuel Production

DEFF Research Database (Denmark)

Jensen, Anders

at higher loadings. The effect of increased reaction time was found to be beneficial for oil yields but also caused an increase in solvent consumption and so there is a trade-off where a compromise has to be found in the event of an up scaled reaction. The reactions that cause solvent consumption during......Lignocellulosic biorefineries can be an important piece of the puzzle in fighting climate change. Present, biorefineries that produce ethanol from lignocellulose are challenged in working on market terms as the two product streams ethanol and lignin are low value products. The aim of this project...... has been to increase the value of the lignin stream. Recent regulations on shipping exhaust gasses in coastal waters dictate lower sulfur emissions which require ships to use low sulfur fuels for propulsion. This opens or expands a very large market for low sulfur fuels because a shift from...

Supply Chain Optimization of Integrated Glycerol Biorefinery: GlyThink Model Development and Application

DEFF Research Database (Denmark)

Loureiro da Costa Lira Gargalo, Carina; Carvalho, Ana; Gernaey, Krist

2017-01-01

To further advance the development and implementation of glycerol-based biorefinery concepts, it is critical to analyze the glycerol conversion into high value-added products in a holistic manner, considering both production as well as the logistics aspects related to the supply chain structure...... is able to identify operational decisions, including locations, capacity levels, technologies, and product portfolio, as well as strategic decisions such as inventory levels, production amounts, and transportation to the final markets. Several technologies are considered for the glycerol valorization...... to high value-added products. Existing countries with major production and consumption of biodiesel in Europe are considered as candidates for the facility sites and demand markets, and their spatial distribution is also carefully studied. The results showed that (i) the optimal solution that provides...

Biorefinery Demonstration Project Final Progress Report

Energy Technology Data Exchange (ETDEWEB)

Lee, David [University of Georgia Research Foundation, Inc., Athens, GA (United States)

2015-10-20

In this project we focused on various aspects of biorefinery technology development including algal-biorefinery technology, thermochemical conversion of biomass to bio-oils and biochar; we tested characteristics and applications of biochars and evaluated nutrient cycling with wastewater treatment by the coupling of algal culture systems and anaerobic digestion. Key results include a method for reducing water content of bio-oil through atomized alcohol addition. The effect included increasing the pH and reducing the viscosity and cloud point of the bio-oil. Low input biochar production systems were evaluated via literature reviews and direct experimental work. Additionally, emissions were evaluated and three biochar systems were compared via a life cycle analysis. Attached growth systems for both algal cultivation and algal harvesting were found to be superior to suspended growth cultures. Nutrient requirements for algal cultivation could be obtained by the recycling of anaerobic digester effluents, thus experimentally showing that these two systems could be directly coupled. Twenty-two journal articles and six intellectual property applications resulted from the cumulative work that this project contributed to programmatically.

Multi-Product Microalgae Biorefineries: From Concept Towards Reality.

Science.gov (United States)

't Lam, G P; Vermuë, M H; Eppink, M H M; Wijffels, R H; van den Berg, C

2018-02-01

Although microalgae are a promising biobased feedstock, industrial scale production is still far off. To enhance the economic viability of large-scale microalgae processes, all biomass components need to be valorized, requiring a multi-product biorefinery. However, this concept is still too expensive. Typically, downstream processing of industrial biotechnological bulk products accounts for 20-40% of the total production costs, while for a microalgae multi-product biorefinery the costs are substantially higher (50-60%). These costs are high due to the lack of appropriate and mild technologies to access the different product fractions such as proteins, carbohydrates, and lipids. To reduce the costs, simplified processes need to be developed for the main unit operations including harvesting, cell disruption, extraction, and possibly fractionation. Copyright © 2017 Elsevier Ltd. All rights reserved.

Environmental performances of coproducts. Application of Claiming-Based Allocation models to straw and vetiver biorefineries in an Indian context.

Science.gov (United States)

Gnansounou, Edgard; Raman, Jegannathan Kenthorai

2018-04-24

Among the renewables, non-food and wastelands based biofuels are essential for the transport sector to achieve country's climate mitigation targets. With the growing interest in biorefineries, setting policy requirements for other coproducts along with biofuels is necessary to improve the products portfolio of biorefinery, increase the bioproducts perception by the consumers and push the technology forward. Towards this context, Claiming-Based allocation models were used in comparative life cycle assessment of multiple products from wheat straw biorefinery and vetiver biorefinery. Vetiver biorefinery shows promising Greenhouse gas emission savings (181-213%) compared to the common crop based lignocellulose (wheat straw) biorefinery. Assistance of Claiming-Based Allocation models favors to find out the affordable allocation limit (0-80%) among the coproducts in order to achieve the individual prospective policy targets. Such models show promising application in multiproduct life cycle assessment studies where appropriate allocation is challenging to achieve the individual products emission subject to policy targets. Copyright © 2018 Elsevier Ltd. All rights reserved.

Optimal processing pathway selection for microalgae-based biorefinery under uncertainty

DEFF Research Database (Denmark)

Rizwan, Muhammad; Zaman, Muhammad; Lee, Jay H.

2015-01-01

We propose a systematic framework for the selection of optimal processing pathways for a microalgaebased biorefinery under techno-economic uncertainty. The proposed framework promotes robust decision making by taking into account the uncertainties that arise due to inconsistencies among...... and shortage in the available technical information. A stochastic mixed integer nonlinear programming (sMINLP) problem is formulated for determining the optimal biorefinery configurations based on a superstructure model where parameter uncertainties are modeled and included as sampled scenarios. The solution...... the accounting of uncertainty are compared with respect to different objectives. (C) 2015 Elsevier Ltd. All rights reserved....

Biodiesel biorefinery: opportunities and challenges for microbial production of fuels and chemicals from glycerol waste

Directory of Open Access Journals (Sweden)

Almeida João R M

2012-07-01

Full Text Available Abstract The considerable increase in biodiesel production worldwide in the last 5 years resulted in a stoichiometric increased coproduction of crude glycerol. As an excess of crude glycerol has been produced, its value on market was reduced and it is becoming a “waste-stream” instead of a valuable “coproduct”. The development of biorefineries, i.e. production of chemicals and power integrated with conversion processes of biomass into biofuels, has been singled out as a way to achieve economically viable production chains, valorize residues and coproducts, and reduce industrial waste disposal. In this sense, several alternatives aimed at the use of crude glycerol to produce fuels and chemicals by microbial fermentation have been evaluated. This review summarizes different strategies employed to produce biofuels and chemicals (1,3-propanediol, 2,3-butanediol, ethanol, n-butanol, organic acids, polyols and others by microbial fermentation of glycerol. Initially, the industrial use of each chemical is briefly presented; then we systematically summarize and discuss the different strategies to produce each chemical, including selection and genetic engineering of producers, and optimization of process conditions to improve yield and productivity. Finally, the impact of the developments obtained until now are placed in perspective and opportunities and challenges for using crude glycerol to the development of biodiesel-based biorefineries are considered. In conclusion, the microbial fermentation of glycerol represents a remarkable alternative to add value to the biodiesel production chain helping the development of biorefineries, which will allow this biofuel to be more competitive.

Modelling of the biorefinery scenarios - Bioscen

Energy Technology Data Exchange (ETDEWEB)

Pitkanen, J.-P. [VTT Technical Research Centre of Finland, Espoo (Finland)], email: juha-pekka.pitkanen@vtt.fi

2012-07-01

The purpose of the BioScen project was to develop quantitative modelling approaches for the future biomass based processes producing fuels and chemicals. The aim of the project was in developing methods to estimate the necessary material properties for phase and reaction equilibria, for the calculation of unit processes and their integration to biorefining production plant simulations. Additional focus was laid on model optimisation and product life cycle analysis. As the biorefining technologies possess an extensive range from thermal pyrolysis to biochemical processing at ambient temperatures, a most generic thermodynamically based approach was selected to enable usage of the methods to the wide variety of possible applications. The methods were then applied to a number of case studies including modelling of flash condensation of pyrolysis oil, hydrolysis of cellulosic biomass and its product recovery and the subsequent fermentation processes for bioethanol and biobutanol, for which also a comparative life cycle analysis was performed. Flowsheet process simulation was applied to a conceptual wood bark biorefinery. Metamodelling techniques were used for both model and parameter optimisation, including their sensitivity analysis.

Process design, supply chain, economic and environmental analysis for chemical production in a glycerol biorefinery: Towards the sustainable design of biorefineries

DEFF Research Database (Denmark)

Loureiro da Costa Lira Gargalo, Carina

are developed, where uncertainty and sensitivity analysis play a significant role. Nevertheless, in order to further advance the development and implementation of glyc-erol based biorefinery concepts, it is critical to analyze the glycerol conversion into high value-added products in a holistic manner......, considering both production as well as the logistics aspects related to the supply chain structure. Therefore, the boundaries of anal-ysis were extended to include all activities and operations involved in the glycerol-based biorefinery to bioproducts supply chain. To this end, the GlyThink model is proposed...... so as to identify operational decisions - including locations, capacity levels, technologies and product portfolio, as well as strategic decisions such as inventory levels, production amounts and transportation to the final markets. GlyThink is a multi-period, multi-stage and multi-product Mixed...

Modern microbial solid state fermentation technology for future biorefineries for the production of added-value products

Directory of Open Access Journals (Sweden)

Musaalbakri Abdul Manan

2017-12-01

Full Text Available The promise of industrial biotechnology has been around since Chaim Weizmann developed acetone–butanol–ethanol fermentation at the University of Manchester in 1917 and the prospects nowadays look brighter than ever. Today’s biorefinery technologies would be almost unthinkable without biotechnology. This is a growing trend and biorefineries have also increased in importance in agriculture and the food industry. Novel biorefinery processes using solid state fermentation (SSF technology have been developed as alternative to conventional processing routes, leading to the production of added-value products from agriculture and food industry raw materials. SSF involves the growth of microorganisms on moist solid substrate in the absence of free-flowing water. Future biorefineries based on SSF aim to exploit the vast complexity of the technology to modify biomass produced by agriculture and the food industry for valuable by-products through microbial bioconversion. In this review, a summary has been made of the attempts at using modern microbial SSF technology for future biorefineries for the production of many added-value products ranging from feedstock for the fermentation process and biodegradable plastics to fuels and chemicals.

Knowledge management in a waste based biorefinery in the QbD paradigm.

Science.gov (United States)

Rathore, Anurag S; Chopda, Viki R; Gomes, James

2016-09-01

Shifting resource base from fossil feedstock to renewable raw materials for production of chemical products has opened up an area of novel applications of industrial biotechnology-based process tools. This review aims to provide a concise and focused discussion on recent advances in knowledge management to facilitate efficient and optimal operation of a biorefinery. Application of quality by design (QbD) and process analytical technology (PAT) as tools for knowledge creation and management at different levels has been highlighted. Role of process integration, government policies, knowledge exchange through collaboration, and use of databases and computational tools have also been touched upon. Copyright © 2016 Elsevier Ltd. All rights reserved.

Application of CAPEC Lipid Property Databases in the Synthesis and Design of Biorefinery Networks

DEFF Research Database (Denmark)

Bertran, Maria-Ona; Cunico, Larissa; Gani, Rafiqul

Petroleum is currently the primary raw material for the production of fuels and chemicals. Consequently, our society is highly dependent on fossil non-renewable resources. However, renewable raw materials are recently receiving increasing interest for the production of chemicals and fuels, so a n...... of biorefinery networks. The objective of this work is to show the application of databases of physical and thermodynamic properties of lipid components to the synthesis and design of biorefinery networks.......]. The wide variety and complex nature of components in biorefineries poses a challenge with respect to the synthesis and design of these types of processes. Whereas physical and thermodynamic property data or models for petroleum-based processes are widely available, most data and models for biobased...

Engineering Cellulases for Biorefinery

Energy Technology Data Exchange (ETDEWEB)

Kumar, Manoj [Royal DSM, San Francisco, CA (United States)

2010-06-27

Lignocellulosic biomass is the most abundant, least expensive renewable natural biological resource for the production of biobased products and bioenergy is important for the sustainable development of human civilization in 21st century. For making the fermentable sugars from lignocellulosic biomass, a reduction in cellulase production cost, an improvement in cellulase performance, and an increase in sugar yields are all vital to reduce the processing costs of biorefineries. Improvements in specific cellulase activities for non-complexed cellulase mixtures can be implemented through cellulase engineering based on rational design or directed evolution for each cellulase component enzyme, as well as on the reconstitution of cellulase components. In this paper, we will provide DSM's efforts in cellulase research and developments and focus on limitations. Cellulase improvement strategies based on directed evolution using screening on relevant substrates, screening for higher thermal tolerance based on activity screening approaches such as continuous culture using insoluble cellulosic substrates as a powerful selection tool for enriching beneficial cellulase mutants from the large library. We will illustrate why and how thermostable cellulases are vital for economic delivery of bioproducts from cellulosic biomass using biochemical conversion approach.

Commercializing Biorefinery Technology: A Case for the Multi-Product Pathway to a Viable Biorefinery

Directory of Open Access Journals (Sweden)

Shijie Liu

2011-11-01

Full Text Available While there may be many reasons why very interesting science ideas never reach commercial practice, one of the more prevalent is that the reaction or process, which is scientifically possible, cannot be made efficient enough to achieve economic viability. One pathway to economic viability for many business sectors is the multi-product portfolio. Research, development, and deployment of viable biorefinery technology must meld sound science with engineering and business economics. It is virtually axiomatic that increased value can be generated by isolating relatively pure substances from heterogeneous raw materials. Woody biomass is a heterogeneous raw material consisting of the major structural components, cellulose, lignin, and hemicelluloses, as well as minor components, such as extractives and ash. Cellulose is a linear homopolymer of D-glucopyrano-units with β-D(1®4 connections and is the wood component most resistant to chemical and biological degradation. Lignin is a macromolecule of phenylpropanoid units, second to cellulose in bio-resistance, and is the key component that is sought for removal from woody biomass in chemical pulping. Hemicelluloses are a collection of heteropolysaccharides, comprised mainly of 5- and 6-carbon sugars. Extractives, some of which have high commercial value, are a collection of low molecular weight organic and inorganic woody materials that can be removed, to some extent, under mild conditions. Applied Biorefinery Sciences, LLC (a private, New York, USA based company is commercializing a value-optimization pathway (the ABS Process™ for generating a multi-product portfolio by isolating and recovering homogeneous substances from each of the above mentioned major and minor woody biomass components. The ABS Process™ incorporates the patent pending, core biorefinery technology, “hot water extraction”, as developed at the State University of New York College of Environmental Science and Forestry (SUNY

Catalysis for biorefineries-performance criteria for industrial operation

NARCIS (Netherlands)

Lange, Jean Paul

2016-01-01

Past analyses of industrial processes for fuel and chemical manufacturing led to a few performance criteria that are critical for viable industrial operation. The present paper reviews these factors and provides a target window for each of them. It then illustrates their relevance for biorefineries

Optimal design of a multi-product biorefinery system

DEFF Research Database (Denmark)

Zondervan, E.; Nawaz, Mehboob; de Haan, André B.

2011-01-01

In this paper we propose a biorefinery optimization model that can be used to find the optimal processing route for the production of ethanol, butanol, succinic acid and blends of these chemicals with fossil fuel based gasoline. The approach unites transshipment models with a superstructure...

Recent trends on techno-economic assessment (TEA of sugarcane biorefineries

Directory of Open Access Journals (Sweden)

Mohsen Ali Mandegari

2017-09-01

Full Text Available Sustainability challenges, e.g., climate change, resource depletion, and expanding populations, have triggered a swift move towards a circular bio-economy which is expected to evolve progressively in the coming decades. However, the transition from a fossil fuel-based economy to a bio-based economy requires the exploitation of scientific innovations and step changes in the infrastructure of chemical industry. Biorefineries have been extensively investigated for biofuel production from first and second generation feedstocks, whereas some research activities have been conducted on production of biochemical and biopolymers from renewable resources. Techno-economic evaluation of diverse technologies for production of biofuels and biochemical is a crucial step for decision making in the development of bio-economy. This contribution focuses on the economic studies carried out on biorefineries converting sugarcane bagasse, due to its availability and importance in the South African context, into value-added products. Recent studies on biofuel production via biochemical pathway, e.g., ethanol, butanol, or thermochemical pathway, e.g., methanol and bio jet fuel as well as production of biochemicals with high market demands and diverse applications such as lactic acid, succinic acid, and xylitol have been briefly reviewed. In addition, an overview on the production of biopolymers such as polyl-lactic acid and bio-based monomers, i.e., butanediol, from sugarcane bagasse is reported.

Techno-economic risk analysis of glycerol biorefinery concepts against market price fluctuation

DEFF Research Database (Denmark)

Gargalo, Carina L.; Cheali, Peam; Gernaey, Krist

. The high-value added bio-products boost profitability, the high-volume fuel helps meet national energy targets, and the power production cuts costs and dodges greenhouse-gas emissions [1] [2] [3]. The increasing amount of biodiesel production worldwide (e.g. from vegetable oils, palm oil, animal fats......) and the associated economic risks against historical market fluctuations when assessing the economics of competing glycerol biorefinery concepts. The aim is to compare the fitness/survival of the biorefinery concepts under extreme market disturbances. To perform this analysis, we used a superstructure based...

Sustainable and Efficient Pathways for Bioenergy Recovery from Low-Value Process Streams via Bioelectrochemical Systems in Biorefineries

Directory of Open Access Journals (Sweden)

Abhijeet P. Borole

2015-08-01

Full Text Available Conversion of biomass into bioenergy is possible via multiple pathways resulting in the production of biofuels, bioproducts, and biopower. Efficient and sustainable conversion of biomass, however, requires consideration of many environmental and societal parameters in order to minimize negative impacts. Integration of multiple conversion technologies and inclusion of upcoming alternatives, such as bioelectrochemical systems, can minimize these impacts via production of hydrogen, electricity or other forms of energy from the low value streams and improve conservation of resources, such as water and nutrients via recycle and reuse. This report outlines alternate pathways integrating microbial electrolysis in biorefinery schemes to improve energy efficiency, while evaluating environmental sustainability parameters.

Bio-refinery approach for spent coffee grounds valorization.

Science.gov (United States)

Mata, Teresa M; Martins, António A; Caetano, Nídia S

2018-01-01

Although normally seen as a problem, current policies and strategic plans concur that if adequately managed, waste can be a source of the most interesting and valuable products, among which metals, oils and fats, lignin, cellulose and hemicelluloses, tannins, antioxidants, caffeine, polyphenols, pigments, flavonoids, through recycling, compound recovery or energy valorization, following the waste hierarchy. Besides contributing to more sustainable and circular economies, those products also have high commercial value when compared to the ones obtained by currently used waste treatment methods. In this paper, it is shown how the bio-refinery framework can be used to obtain high value products from organic waste. With spent coffee grounds as a case study, a sequential process is used to obtain first the most valuable, and then other products, allowing proper valorization of residues and increased sustainability of the whole process. Challenges facing full development and implementation of waste based bio-refineries are highlighted. Copyright © 2017 Elsevier Ltd. All rights reserved.

Towards lactic acid bacteria-based biorefineries.

Science.gov (United States)

Mazzoli, Roberto; Bosco, Francesca; Mizrahi, Itzhak; Bayer, Edward A; Pessione, Enrica

2014-11-15

Lactic acid bacteria (LAB) have long been used in industrial applications mainly as starters for food fermentation or as biocontrol agents or as probiotics. However, LAB possess several characteristics that render them among the most promising candidates for use in future biorefineries in converting plant-derived biomass-either from dedicated crops or from municipal/industrial solid wastes-into biofuels and high value-added products. Lactic acid, their main fermentation product, is an attractive building block extensively used by the chemical industry, owing to the potential for production of polylactides as biodegradable and biocompatible plastic alternative to polymers derived from petrochemicals. LA is but one of many high-value compounds which can be produced by LAB fermentation, which also include biofuels such as ethanol and butanol, biodegradable plastic polymers, exopolysaccharides, antimicrobial agents, health-promoting substances and nutraceuticals. Furthermore, several LAB strains have ascertained probiotic properties, and their biomass can be considered a high-value product. The present contribution aims to provide an extensive overview of the main industrial applications of LAB and future perspectives concerning their utilization in biorefineries. Strategies will be described in detail for developing LAB strains with broader substrate metabolic capacity for fermentation of cheaper biomass. Copyright © 2014 Elsevier Inc. All rights reserved.

Upgrading of lignocellulosic biorefinery to value-added chemicals: Sustainability and economics of bioethanol-derivatives

DEFF Research Database (Denmark)

Cheali, Peam; Posada, John A.; Gernaey, Krist

2015-01-01

with a sustainability assessment method is used as evaluation tool. First, an existing superstructure representing the lignocellulosic biorefinery design network is extended to include the options for catalytic conversion of bioethanol to value-added derivatives. Second, the optimization problem for process upgrade...... of operating profit for biorefineries producing bioethanol-derived chemicals (247 MM$/a and 241 MM$/a for diethyl ether and 1,3-butadiene, respectively). Second, the optimal designs for upgrading bioethanol (i.e. production of 1,3-butadiene and diethyl ether) performed also better with respect...... to sustainability compared with the petroleum-based processes. In both cases, the effects of the market price uncertainties were also analyzed by performing quantitative economic risk analysis and presented a significant risk of investment for a lignocellulosic biorefinery (12 MM$/a and 92 MM$/a for diethyl ether...

Process design and economic analysis of a biorefinery co-producing itaconic acid and electricity from sugarcane bagasse and trash lignocelluloses.

Science.gov (United States)

Nieder-Heitmann, Mieke; Haigh, Kathleen F; Görgens, Johann F

2018-08-01

Itaconic acid has economic potential as a commodity biochemical for the sugar industry, but its production is limited due to high production costs. Using cheaper and alternative lignocellulosic feedstocks together with achieving higher product titres have been identified as potential strategies for viable IA production. Consequently the use of sugarcane bagasse and trash for the production of itaconic acid (IA) and electricity have been investigated for an integrated biorefinery, where the production facility is annexed to an existing sugar mill and new combined heat and power (CHP) plant. Three IA biorefinery scenarios were designed and simulated in Aspen Plus®. Subsequent economic analyses indicated that cheaper feedstocks reduced the IA production cost from 1565.5 US$/t for glucose to 616.5 US$/t, but coal supplementation was required to sufficiently lower the production cost to 604.3 US$/t for a competitive IA selling price of 1740 US$/t, compared to the market price of 1800 US$/t. Copyright © 2018 Elsevier Ltd. All rights reserved.

Valorization of Sargassum muticum Biomass According to the Biorefinery Concept

Directory of Open Access Journals (Sweden)

Elena M. Balboa

2015-06-01

Full Text Available The biorefinery concept integrates processes and technologies for an efficient biomass conversion using all components of a feedstock. Sargassum muticum is an invasive brown algae which could be regarded as a renewable resource susceptible of individual valorization of the constituent fractions into high added-value compounds. Microwave drying technology can be proposed before conventional ethanol extraction of algal biomass, and supercritical fluid extraction with CO2 was useful to extract fucoxanthin and for the fractionation of crude ethanol extracts. Hydrothermal processing is proposed to fractionate the algal biomass and to solubilize the fucoidan and phlorotannin fractions. Membrane technology was proposed to concentrate these fractions and obtain salt- and arsenic-free saccharidic fractions. Based on these technologies, this study presents a multipurpose process to obtain six different products with potential applications for nutraceutical, cosmetic and pharmaceutical industries.

Sugar beet leaves: from biorefinery to techno-functionality

NARCIS (Netherlands)

Kiskini, Alexandra

2017-01-01

Sugar beet leaves (SBL), which are a side stream of the sugar beets cultivation, are currently left unexploited after sugar beets have been harvested. The general aim of this thesis was to study the biorefinery of SBL, with a special focus on the isolation of proteins. To reach this aim the

Framework methodology for increased energy efficiency and renewable feedstock integration in industrial clusters

International Nuclear Information System (INIS)

Hackl, Roman; Harvey, Simon

2013-01-01

Highlights: • Framework methodology for energy efficiency of process plants and total sites. • Identification of suitable biorefinery based on host site future energy systems. • Case study results show large energy savings of site wide heat integration. • Case study on refrigeration systems: 15% shaft work savings potential. • Case study on biorefinery integration: utility savings potential of up to 37%. - Abstract: Energy intensive industries, such as the bulk chemical industry, are facing major challenges and adopting strategies to face these challenges. This paper investigates options for clusters of chemical process plants to decrease their energy and emission footprints. There is a wide range of technologies and process integration opportunities available for achieving these objectives, including (i) decreasing fossil fuel and electricity demand by increasing heat integration within individual processes and across the total cluster site; (ii) replacing fossil feedstocks with renewables and biorefinery integration with the existing cluster; (iii) increasing external utilization of excess process heat wherever possible. This paper presents an overview of the use of process integration methods for development of chemical clusters. Process simulation, pinch analysis, Total Site Analysis (TSA) and exergy concepts are combined in a holistic approach to identify opportunities to improve energy efficiency and integrate renewable feedstocks within such clusters. The methodology is illustrated by application to a chemical cluster in Stenungsund on the West Coast of Sweden consisting of five different companies operating six process plants. The paper emphasizes and quantifies the gains that can be made by adopting a total site approach for targeting energy efficiency measures within the cluster and when investigating integration opportunities for advanced biorefinery concepts compared to restricting the analysis to the individual constituent plants. The

BIOREFINE-2G — Result In Brief: Novel biopolymers from biorefinery waste-streams

DEFF Research Database (Denmark)

Stovicek, Vratislav; Chen, Xiao; Borodina, Irina

Second generation biorefineries are all about creating value from waste, so it seems only right that the ideal plant should leave nothing behind. With this in mind, the BIOREFINE-2G project has developed novel processes to convert pentose-rich side-streams into biopolymers.......Second generation biorefineries are all about creating value from waste, so it seems only right that the ideal plant should leave nothing behind. With this in mind, the BIOREFINE-2G project has developed novel processes to convert pentose-rich side-streams into biopolymers....

Multi-product biorefineries from lignocelluloses: a pathway to revitalisation of the sugar industry?

Science.gov (United States)

Farzad, Somayeh; Mandegari, Mohsen Ali; Guo, Miao; Haigh, Kathleen F; Shah, Nilay; Görgens, Johann F

2017-01-01

Driven by a range of sustainability challenges, e.g. climate change, resource depletion and expanding populations, a circular bioeconomy is emerging and expected to evolve progressively in the coming decades. South Africa along with other BRICS countries (Brazil, Russia, India and China) represents the emerging bioeconomy and contributes significantly to global sugar market. In our research, South Africa is used as a case study to demonstrate the sustainable design for the future biorefineries annexed to existing sugar industry. Detailed techno-economic evaluation and Life Cycle Assessment (LCA) were applied to model alternative routes for converting sugarcane residues (bagasse and trash) to selected biofuel and/or biochemicals (ethanol, ethanol and lactic acid, ethanol and furfural, butanol, methanol and Fischer-Tropsch synthesis, with co-production of surplus electricity) in an energy self-sufficient biorefinery system. Economic assessment indicated that methanol synthesis with an internal rate of return (IRR) of 16.7% and ethanol-lactic acid co-production (20.5%) met the minimum investment criteria of 15%, while the latter had the lowest sensitivity to market price amongst all the scenarios. LCA results demonstrated that sugarcane cultivation was the most significant contributor to environmental impacts in all of the scenarios, other than the furfural production scenario in which a key step, a biphasic process with tetrahydrofuran solvent, had the most significant contribution. Overall, the thermochemical routes presented environmental advantages over biochemical pathways on most of the impact categories, except for acidification and eutrophication. Of the investigated scenarios, furfural production delivered the inferior environmental performance, while methanol production performed best due to its low reagent consumption. The combined techno-economic and environmental assessments identified the performance-limiting steps in the 2G biorefinery design for

Techno-economical evaluation of protein extraction for microalgae biorefinery

NARCIS (Netherlands)

Sari, Y.W.; Sanders, J.P.M.; Bruins, M.

2016-01-01

Due to scarcity of fossil feedstocks, there is an increasing demand for biobased fuels. Microalgae are considered as promising biobased feedstocks. However, microalgae based fuels are not yet produced at large scale at present. Applying biorefinery, not only for oil, but also for other

Techno-economic and profitability analysis of food waste biorefineries at European level.

Science.gov (United States)

Cristóbal, Jorge; Caldeira, Carla; Corrado, Sara; Sala, Serenella

2018-07-01

Food waste represents a potential source to produce value-added materials replacing the use of virgin ones. However, the use of food waste as feedstock in biorefineries is still at an early stage of development and studies assessing its economic viability at large scale are lacking in the literature. This paper presents a techno-economic and profitability analysis of four food waste biorefineries that use wastes from tomato, potato, orange, and olive processing as feedstock. The study includes the assessment of potentially available quantities of those waste flows in Europe. Due to the low technology readiness level of this kind of biorefineries, a screening methodology to estimate the investment and manufacturing costs as well as two profitability ratios (the return on investment and the payback time) was adopted. Results show that not all the waste feedstocks have the same potential. The most profitable options are those related to implementing fewer plants, namely concentrating the production and capitalising on economies of scale while being at risk of increasing externalities, e.g. due to logistics of the feedstocks. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.

Multitasking mesoporous nanomaterials for biorefinery applications

Energy Technology Data Exchange (ETDEWEB)

Kandel, Kapil [Iowa State Univ., Ames, IA (United States)

2013-01-01

in microalgae biorefinery. Two different integrated biorefinery systems are highlighted. (i) OM-MSNs are used to harvest microalgae and selectively sequester free fatty acids (FFAs). (ii) OM-MSNs are shown to selectively sequester FFAs and convert them into diesel-range liquid hydrocarbon fuels. A similar MSN supported metal nanoparticle catalyst is demonstrated to transform FFAs into green diesel with even greater activity and selectivity. The incorporation of a different organic functional group into MSN provides a selective adsorbent for separation and purification of α-tocopherol from microalgae oil. The functional group with electron deficient aromatic rings demonstrated high sequestration capacity and selectivity of {alpha}-tocopherol.

[Phenolic foam prepared by lignin from a steam-explosion derived biorefinery of corn stalk].

Science.gov (United States)

Wang, Guanhua; Chen, Hongzhang

2014-06-01

To increase the integral economic effectiveness, biorefineries of lignocellulosic materials should not only utilize carbohydrates hydrolyzed from cellulose and hemicellulose but also use lignin. We used steam-exploded corn stalk as raw materials and optimized the temperature and alkali concentration in the lignin extraction process to obtain lignin liquor with higher yield and purity. Then the concentrated lignin liquor was used directly to substitute phenol for phenolic foam preparation and the performances of phenolic foam were characterized by microscopic structure analysis, FTIR, compression strength and thermal conductivity detection. The results indicated that, when steam-exploded corn stalk was extracted at 120 degrees C for 2 h by 1% NaOH with a solid to liquid ratio of 1:10, the extraction yield of lignin was 79.67%. The phenolic foam prepared from the concentrated lignin liquor showed higher apparent density and compression strength with the increasing substitution rate of lignin liquor. However, there were not significant differences of thermal conductivity and flame retardant properties by the addition of lignin, which meant that the phenolic foam substituted by lignin liquor was approved for commercial application. This study, which uses alkali-extracted lignin liquor directly for phenolic foam preparation, provides a relatively simple way for utilization of lignin and finally increases the overall commercial operability ofa lignocellulosic biorefinery derived by steam explosion.

Scaling laws and technology development strategies for biorefineries and bioenergy plants.

Science.gov (United States)

Jack, Michael W

2009-12-01

The economies of scale of larger biorefineries or bioenergy plants compete with the diseconomies of scale of transporting geographically distributed biomass to a central location. This results in an optimum plant size that depends on the scaling parameters of the two contributions. This is a fundamental aspect of biorefineries and bioenergy plants and has important consequences for technology development as "bigger is better" is not necessarily true. In this paper we explore the consequences of these scaling effects via a simplified model of biomass transportation and plant costs. Analysis of this model suggests that there is a need for much more sophisticated technology development strategies to exploit the consequences of these scaling effects. We suggest three potential strategies in terms of the scaling parameters of the system.

Algal Biomass for Bioenergy and Bioproducts Production in Biorefinery Concepts

DEFF Research Database (Denmark)

D'Este, Martina

industry. The macroalgae used in this work were Laminaria digitata and Saccharina latissima, while the microalgae were Chlorella sorokiniana, Chlorella vulgaris and Chlorella protothecoides. Moreover, an evaluation of the effect of the harvesting season and location on the composition of high value...... feedstocks. Biorefinery represents an important tool towards the development of a sustainable economy. Within the biorefinery framework several bioproducts, such as food, feed and biofuels, can be produced from biomass. The specific composition of the biomass feedstock determines the potential final product...... heterotrophically in the macroalgae L. digitata hydrolyzed. The final composition of the microalgal biomass showed that the protein content was increased from 0.07 ± 0.01 gProtein gDM-1 to 0.44 ± 0.04 gProtein DM-1. The results obtained show that this solution may represent an interesting strategy to be applied...

Bio-Refineries Bioprocess Technologies for Waste-Water Treatment, Energy and Product Valorization

Science.gov (United States)

Keith Cowan, A.

2010-04-01

Increasing pressure is being exerted on communities and nations to source energy from forms other than fossil fuels. Also, potable water is becoming a scarce resource in many parts of the world, and there remains a large divide in the demand and utilization of plant products derived from genetically modified organisms (GMOs) and non-GMOs. The most extensive user and manager of terrestrial ecosystems is agriculture which is also the de facto steward of natural resources. As stated by Miller (2008) no other industry or institution comes close to the comparative advantage held for this vital responsibility while simultaneously providing food, fiber, and other biology-based products, including energy. Since modern commercial agriculture is transitioning from the production of bulk commodities to the provision of standardized products and specific-attribute raw materials for differentiated markets, we can argue that processes such as mass cultivation of microalgae and the concept of bio-refineries be seen as part of a `new' agronomy. EBRU is currently exploring the integration of bioprocess technologies using microalgae as biocatalysts to achieve waste-water treatment, water polishing and endocrine disruptor (EDC) removal, sustainable energy production, and exploitation of the resultant biomass in agriculture as foliar fertilizer and seed coatings, and for commercial extraction of bulk commodities such as bio-oils and lecithin. This presentation will address efforts to establish a fully operational solar-driven microalgae bio-refinery for use not only in waste remediation but to transform waste and biomass to energy, fuels, and other useful materials (valorisation), with particular focus on environmental quality and sustainability goals.

Preprocessing Moist Lignocellulosic Biomass for Biorefinery Feedstocks

Energy Technology Data Exchange (ETDEWEB)

Neal Yancey; Christopher T. Wright; Craig Conner; J. Richard Hess

2009-06-01

Biomass preprocessing is one of the primary operations in the feedstock assembly system of a lignocellulosic biorefinery. Preprocessing is generally accomplished using industrial grinders to format biomass materials into a suitable biorefinery feedstock for conversion to ethanol and other bioproducts. Many factors affect machine efficiency and the physical characteristics of preprocessed biomass. For example, moisture content of the biomass as received from the point of production has a significant impact on overall system efficiency and can significantly affect the characteristics (particle size distribution, flowability, storability, etc.) of the size-reduced biomass. Many different grinder configurations are available on the market, each with advantages under specific conditions. Ultimately, the capacity and/or efficiency of the grinding process can be enhanced by selecting the grinder configuration that optimizes grinder performance based on moisture content and screen size. This paper discusses the relationships of biomass moisture with respect to preprocessing system performance and product physical characteristics and compares data obtained on corn stover, switchgrass, and wheat straw as model feedstocks during Vermeer HG 200 grinder testing. During the tests, grinder screen configuration and biomass moisture content were varied and tested to provide a better understanding of their relative impact on machine performance and the resulting feedstock physical characteristics and uniformity relative to each crop tested.

Biorefineries - New Green Strategy For Development Of Smart And Innovative Industry

Science.gov (United States)

Płaza, Grażyna A.; Wandzich, Dorota

2016-09-01

Ecological engineering or ecotechnology is defined as the design of sustainable production that integrate human society with the natural environment for the benefit of both. In order to reach the goal of sustainability therefore important that bioproduct production systems are converted from to natural cycle oriented. In natural cycles there are not waste, but products are generated at different stages of the cycle. The ecotechnology creates a sustainable bioeconomy using biomass in a smart and efficient way. The biorefining sector, which uses smart, innovative and efficient technologies to convert biomass feedstocks into a range of bio-based products including fuels, chemicals, power, food, and renewable oils, currently presents the innovative and efficient bio-based production can revitalize existing industries. The paper presents the concept of biorefinery as the ecotechnological approach for creating a sustainable bioeconomy using biomass in a smart and efficient way.

Wallowa County Integrated Biomass Energy Center

Energy Technology Data Exchange (ETDEWEB)

Christoffersen, Nils [Wallowa Resources Community Solutions Inc., Wallowa, OR (United States)

2014-05-02

The Integrated Biomass Energy Center (IBEC) is an approximately 0.1 MW CHP integrated biorefinery in Northeastern Oregon which will demonstrate and validate small-scale combined heat and power from lignin intermediates/residues. IBEC will be co-located with feedstock suppliers and thermal and power customers for distributed generation. The project was developed by Wallowa Resources Community Solutions Inc.

A short-term scheduling for the optimal operation of biorefineries

International Nuclear Information System (INIS)

Grisi, E.F.; Yusta, J.M.; Khodr, H.M.

2011-01-01

This work presents an analysis of the inherent potentialities and characteristics of the sugarcane industries that produce sugar, bioethanol, biogas and bioelectricity and that are being described as ''Biorefineries''. These Biorefineries are capable of producing bio-energy under diverse forms, intended for their own internal consumption and for external sales and marketing. A complex model and simulation are carried out of the processes of a sugarcane industry, with the data characteristic as well as the production costs, prices of products and considerations on the energy demand by basic processes. A Mixed-Integer Linear Programming (MILP) optimization problem formulation and an analysis of optimal solutions in short-term operation are described, taking into account the production cost functions of each commodity and the incomes obtained from selling electricity and other products. The objective is to maximize the hourly plant economic profit in the different scenarios considered in a real case study. (author)

Techno-economic feasibility of waste biorefinery

DEFF Research Database (Denmark)

Shahzad, Khurram; Narodoslawsky, Michael; Sagir, Muhammad

2017-01-01

elaborated a process for the production of polyhydroxyalkanoate (PHA) biopolymers starting from diverse waste streams of the animal processing industry. This article provides a detailed economic analysis of PHA production from this waste biorefinery concept, encompassing the utilization of low......-quality biodiesel, offal material and meat and bone meal (MBM). Techno-economic analysis reveals that PHA production cost varies from 1.41 €/kg to 1.64 €/kg when considering offal on the one hand as waste, or, on the other hand, accounting its market price, while calculating with fixed costs for the co...

Air Permitting Implications of a Biorefinery Producing Raw Bio-Oil in Comparison with Producing Gasoline and Diesel Blendstocks

Energy Technology Data Exchange (ETDEWEB)

Bhatt, Arpit H [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Zhang, Yi Min [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2018-02-01

A biorefinery, considered a chemical process plant under the Clean Air Act permitting program, could be classified as a major or minor source based on the size of the facility and magnitude of regulated pollutants emitted. Our previous analysis indicates that a biorefinery using fast pyrolysis conversion process to produce finished gasoline and diesel blendstocks with a capacity of processing 2,000 dry metric tons of biomass per day would likely be classified as a major source because several regulated pollutants (such as particulate matter, sulfur dioxide, nitrogen oxide) are estimated to exceed the 100 tons per year (tpy) major source threshold, applicable to chemical process plants. Being subject to a major source classification could pose additional challenges associated with obtaining an air permit in a timely manner before the biorefinery can start its construction. Recent developments propose an alternative approach to utilize bio-oil produced via the fast pyrolysis conversion process by shipping it to an existing petroleum refinery, where the raw bio-oil can be blended with petroleum-based feedstocks (e.g., vacuum gas oil) to produce gasoline and diesel blendstocks with renewable content. Without having to hydro-treat raw bio-oil, a biorefinery is likely to reduce its potential-to-emit to below the 100 tpy major source threshold, and therefore expedite its permitting process. We compare the PTE estimates for the two biorefinery designs with and without hydrotreating of bio-oils and examine the air permitting implications on potential air permit classification and discuss the best available control technology requirements for the major source biorefinery utilizing hydrotreating operation. Our analysis is expected to provide useful information to new biofuel project developers to identify opportunities to overcome challenges associated with air permitting.

Microwave heating processing as alternative of pretreatment in second-generation biorefinery: An overview

International Nuclear Information System (INIS)

Aguilar-Reynosa, Alejandra; Romaní, Aloia; Rodríguez-Jasso, Rosa Ma.; Aguilar, Cristóbal N.; Garrote, Gil; Ruiz, Héctor A.

2017-01-01

Highlights: • Microwave heating pretreatment for lignocellulosic material. • Fundament of lignocellulosic material fractionation using microwave irradiation. • Energy consumption in microwave pretreatments and microwave reactors description. • Microwave heating as pretreatment in a biorefinery concept. - Abstract: The development of a feasible biorefinery is in need of alternative technologies to improve lignocellulosic biomass conversion by the suitable use of energy. Microwave heating processing (MHP) is emerging as promising unconventional pretreatment of lignocellulosic materials (LCMs). MHP applied as pretreatment induces LCMs breakdown through the molecular collision caused by the dielectric polarization. Polar particles movement generates a quick heating consequently the temperatures and times of process are lower. In this way, MHP has positioned as green technology in comparison with other types of heating. Microwave technology represents an excellent option to obtain susceptible substrates to enzymatic saccharification and subsequently in the production of bioethanol and high-added compounds. However, it is still necessary to study the dielectric properties of materials, and conduct economic studies to achieve development in pilot and industrial scale. This work aims to provide an overview of recent progress and alternative configurations for combining the application of microwave technology on the pretreatment of LCMs in terms of biorefinery.

Simulating Pelletization Strategies to Reduce the Biomass Supply Risk at America’s Biorefineries

Energy Technology Data Exchange (ETDEWEB)

Jacob J. Jacobson; Shane Carnohan; Andrew Ford; Allyson Beall

2014-07-01

Demand for cellulosic ethanol and other advanced biofuels has been on the rise, due in part to federal targets enacted in 2005 and extended in 2007. The industry faces major challenges in meeting these worthwhile and ambitious targets. The challenges are especially severe in the logistics of timely feedstock delivery to biorefineries. Logistical difficulties arise from seasonal production that forces the biomass to be stored in uncontrolled field-side environments. In this storage format physical difficulties arise; transportation is hindered by the low bulk density of baled biomass and the unprotected material can decay leading to unpredictable losses. Additionally, uncertain yields and contractual difficulties can exacerbate these challenges making biorefineries a high-risk venture. Investors’ risk could limit business entry and prevent America from reaching the targets. This paper explores pelletizer strategies to convert the lignocellulosic biomass into a denser form more suitable for storage. The densification of biomass would reduce supply risks, and the new system would outperform conventional biorefinery supply systems. Pelletizer strategies exhibit somewhat higher costs, but the reduction in risk is well worth the extra cost if America is to grow the advanced biofuels industry in a sustainable manner.

Biorefining in the prevailing energy and materials crisis: a review of sustainable pathways for biorefinery value chains and sustainability assessment methodologies

DEFF Research Database (Denmark)

Parajuli, Ranjan; Dalgaard, Tommy; Jørgensen, Uffe

2015-01-01

comparisons of alternatives. Life Cycle Assessment is regarded as one of the most relevant tools to assess the environmental hotspots in the biomass supply chains, at processing stages and also to support in the prioritization of any specific biobased products and the alternatives delivered from biorefineries.......The aim of the current paper is to discuss the sustainability aspect of biorefinery systems with focus on biomass supply chains, processing of biomass feedstocks in biorefinery platforms and sustainability assessment methodologies. From the stand point of sustainability, it is important to optimize...... the agricultural production system and minimize the related environmental impacts at the farming system level. These impacts are primarily related to agri-chemical inputs and the related undesired environmental emissions and to the repercussions from biomass production. At the same time, the biorefineries need...

Le bioraffinage, une alternative prometteuse à la pétrochimie

Directory of Open Access Journals (Sweden)

Laurent, P.

2011-01-01

Full Text Available Biorefining, a promising alternative to petrochemistry. Because of the price increase of fossil resources, of their uncertain availability and because of environmental concerns, alternative solutions able to mitigate global warming, and reduce the consumption of fossil fuels and carbon dioxide emissions should be promoted. The replacement of petroleum with biomass as raw material for bioenergy (biofuels, power and heat and chemical production is an interesting option and is the driving force for the development of biorefinery complexes that will have a critical role to play in our common future. A biorefinery is a facility that integrates biomass conversion processes and equipment to produce fuels, power, heat and chemicals from biomass. In biorefinery, almost all types of biomass feedstocks can be converted to different classes of biofuels and biochemicals through various processes that maximize economic and environmental benefits, while minimizing waste and pollution. Through the integration of green chemistry into biorefineries, and the use of low environmental impact technologies, future sustainable production chains of biofuels and high value chemicals from biomass can therefore be established. Currently, the green biorefinery, the whole-crop biorefinery, the oilseed biorefinery and the lignocellulosic feedstock biorefinery are favoured in research, development and industrial implementation, essentially through fully integrated biorefinery complexes.

Anaerobic digestion of vinasse from sugarcane biorefineries in Brazil from energy, environmental, and economic perspectives: Profit or expense?

International Nuclear Information System (INIS)

Moraes, Bruna S.; Junqueira, Tassia L.; Pavanello, Lucas G.; Cavalett, Otávio; Mantelatto, Paulo E.; Bonomi, Antonio; Zaiat, Marcelo

2014-01-01

Highlights: • Anaerobic digestion of vinasse from Brazilian sugarcane biorefineries was assessed. • Energy from biogas could be used for electricity or vehicular fuel replacement. • Biogas in cogeneration could release bagasse for second-generation ethanol production. • Environmental analysis showed decrease of greenhouse gas emissions and pollutant load. • Diesel replacement was the most economically attractive alternative. - Abstract: The need to improve the sustainability of bioethanol production from sugarcane in Brazil has intensified the search for process energy optimization coupled with the environmental suitability of the generated coproducts and wastes. In this scenario, the anaerobic digestion of vinasse (the most abundant effluent from a sugarcane biorefinery) arises as an interesting alternative because, in addition to promoting the stabilization of organic matter, it also enables energy generation from biogas. In this work, vinasse anaerobic digestion in biorefineries was evaluated in terms of energy, environmental, and economic considerations. The energy potential from vinasse of a single sugarcane biorefinery, which is generally lost due to its application to soil with no treatment, was found to be comparable to the electricity supply demand of a city of approximately 130,000 inhabitants or to the surplus energy from bagasse burning that is exported by some sugarcane mills in Brazil. On a national level, such energy is comparable to the electricity generated by some hydroelectric plants, reaching 7.5% of the electricity generated by the world’s largest hydroelectric plant. When burned in boilers, biogas could be used to stimulate second-generation ethanol production because almost 12% of the bagasse could be released from burning and the biogas used to attenuate the process energy demand. As an alternative fuel, biogas could replace up to 40% of the annual diesel supply in the agricultural operations of a sugarcane biorefinery and still

Systematic approach for synthesis of palm oil-based biorefinery

Energy Technology Data Exchange (ETDEWEB)

NG, Rex T. L.; NG, Denny K. S.; LAM, Hon Loong [Dept. of Chemical and Environmental Engineering, Centre of Excellence for Green Technologies, Univ. of Nottingham, Selangor, (Malaysia); TAY, Douglas H. S.; LIM, Joseph H. E. [2GGS Eco Solutions Sdn Bhd, Kuala Lumpur (Malaysia)

2012-11-01

Various types of palm oil biomasses are generated from palm oil mill when crude palm oil (CPO) is produced from fresh fruit bunch (FFB). In the current practice, palm oil biomasses are used as the main source of energy input in the palm oil mill to produce steam and electricity. Moreover, those biomasses are regarded as by-products and can be reclaimed easily. Therefore, there is a continuous increasing interest concerning biomasses generated from the palm oil mill as a source of renewable energy. Although various technologies have been exploited to produce bio-fuel (i.e., briquette, pellet, etc.) as well as heat and power generation, however, no systematic approach which can analyse and optimise the synthesise biorefinery is presented. In this work, a systematic approach for synthesis and optimisation of palm oil-based biorefinery which including palm oil mill and refinery with maximum economic performance is developed. The optimised network configuration with achieves the maximum economic performance can also be determined. To illustrate the proposed approach, a case study is solved in this work.

Microwave-Assisted Extraction for Microalgae: From Biofuels to Biorefinery

Directory of Open Access Journals (Sweden)

Rahul Vijay Kapoore

2018-02-01

Full Text Available The commercial reality of bioactive compounds and oil production from microalgal species is constrained by the high cost of production. Downstream processing, which includes harvesting and extraction, can account for 70–80% of the total cost of production. Consequently, from an economic perspective extraction technologies need to be improved. Microalgal cells are difficult to disrupt due to polymers within their cell wall such as algaenan and sporopollenin. Consequently, solvents and disruption devices are required to obtain products of interest from within the cells. Conventional techniques used for cell disruption and extraction are expensive and are often hindered by low efficiencies. Microwave-assisted extraction offers a possibility for extraction of biochemical components including lipids, pigments, carbohydrates, vitamins and proteins, individually and as part of a biorefinery. Microwave technology has advanced since its use in the 1970s. It can cut down working times and result in higher yields and purity of products. In this review, the ability and challenges in using microwave technology are discussed for the extraction of bioactive products individually and as part of a biorefinery approach.

Optimizing fermentation process miscanthus-to-ethanol biorefinery scale under uncertain conditions

International Nuclear Information System (INIS)

Bomberg, Matthew; Sanchez, Daniel L; Lipman, Timothy E

2014-01-01

Ethanol produced from cellulosic feedstocks has garnered significant interest for greenhouse gas abatement and energy security promotion. One outstanding question in the development of a mature cellulosic ethanol industry is the optimal scale of biorefining activities. This question is important for companies and entrepreneurs seeking to construct and operate cellulosic ethanol biorefineries as it determines the size of investment needed and the amount of feedstock for which they must contract. The question also has important implications for the nature and location of lifecycle environmental impacts from cellulosic ethanol. We use an optimization framework similar to previous studies, but add richer details by treating many of these critical parameters as random variables and incorporating a stochastic sub-model for land conversion. We then use Monte Carlo simulation to obtain a probability distribution for the optimal scale of a biorefinery using a fermentation process and miscanthus feedstock. We find a bimodal distribution with a high peak at around 10–30 MMgal yr −1 (representing circumstances where a relatively low percentage of farmers elect to participate in miscanthus cultivation) and a lower and flatter peak between 150 and 250 MMgal yr −1 (representing more typically assumed land-conversion conditions). This distribution leads to useful insights; in particular, the asymmetry of the distribution—with significantly more mass on the low side—indicates that developers of cellulosic ethanol biorefineries may wish to exercise caution in scale-up. (letters)

Optimizing fermentation process miscanthus-to-ethanol biorefinery scale under uncertain conditions

Science.gov (United States)

Bomberg, Matthew; Sanchez, Daniel L.; Lipman, Timothy E.

2014-05-01

Ethanol produced from cellulosic feedstocks has garnered significant interest for greenhouse gas abatement and energy security promotion. One outstanding question in the development of a mature cellulosic ethanol industry is the optimal scale of biorefining activities. This question is important for companies and entrepreneurs seeking to construct and operate cellulosic ethanol biorefineries as it determines the size of investment needed and the amount of feedstock for which they must contract. The question also has important implications for the nature and location of lifecycle environmental impacts from cellulosic ethanol. We use an optimization framework similar to previous studies, but add richer details by treating many of these critical parameters as random variables and incorporating a stochastic sub-model for land conversion. We then use Monte Carlo simulation to obtain a probability distribution for the optimal scale of a biorefinery using a fermentation process and miscanthus feedstock. We find a bimodal distribution with a high peak at around 10-30 MMgal yr-1 (representing circumstances where a relatively low percentage of farmers elect to participate in miscanthus cultivation) and a lower and flatter peak between 150 and 250 MMgal yr-1 (representing more typically assumed land-conversion conditions). This distribution leads to useful insights; in particular, the asymmetry of the distribution—with significantly more mass on the low side—indicates that developers of cellulosic ethanol biorefineries may wish to exercise caution in scale-up.

Value-Added Products Derived from Waste Activated Sludge: A Biorefinery Perspective

Directory of Open Access Journals (Sweden)

Wei Zhang

2018-04-01

Full Text Available Substantial research has been carried out on sustainable waste activated sludge (WAS management in the last decade. In addition to the traditional approach to reduce its production volume, considering WAS as a feedstock to produce bio-products such as amino acids, proteins, short chain fatty acids, enzymes, bio-pesticides, bio-plastics, bio-flocculants and bio-surfactants represents a key component in the transformation of wastewater treatment plants into biorefineries. The quality of these bio-products is a key factor with respect to the feasibility of non-conventional WAS-based production processes. This review provides a critical assessment of the production process routes of a wide range of value-added products from WAS, their current limitations, and recommendations for future research to help promote more sustainable management of this under-utilised and ever-growing waste stream.

ESTIMATING WATER FOOTPRINT AND MANAGING BIOREFINERY WASTEWATER IN THE PRODUCTION OF BIO-BASED RENEWABLE DIESEL BLENDSTOCK

Energy Technology Data Exchange (ETDEWEB)

Wu, May M. [Argonne National Lab. (ANL), Argonne, IL (United States); Sawyer, Bernard M [Argonne National Lab. (ANL), Argonne, IL (United States)

2016-12-01

This analysis covers the entire biorefinery operation. The study focuses on net water consumed for the production of a unit of biofuel: blue, green, and grey water footprint. Blue water is defined as the water consumed in the biorefinery that is withdrawn from surface and ground water. Blue water footprint includes enzyme cultivation, pretreatment, hydrolysis, bioreactor, cooling system, boiler, fuel upgrading, combustor track, and on-site WWT. Grey water is defined as wastewater generated from the biorefinery and was evaluated based on the wastewater treatment plant design. Green water, defined as rainwater consumed for the production, is not required in the RDB process. Approximately 7–15 gal of water are required to produce a gallon of RDB when corn stover or non-irrigated perennial grasses, switchgrass and Miscanthus x giganteus (Miscanthus), serve as the feedstock in the contiguous United States. Bioelectricity generation from the biorefinery resulted in a net water credit, which reduced the water footprint. The life cycle grey water footprint for nitrogen is primarily from nitrogen in the feedstock production stage because no wastewater is discharged into the environment in the RDB process. Perennial grasses-based RDB production shows a promising grey water footprint, while corn stover-based RDB production has a relatively low green water footprint. Results from the study can help improve our understanding of the water sustainability of advanced biofuel technology under development. Make-up water for cooling and boiling remains a major demand in the biorefinery. The work revealed a key issue or trade-off between achieving zero liquid discharge to maximize water resource use and potentially increasing cost of fuel production. Solid waste disposal was identified as a management issue, and its inverse relationship with wastewater management could affect economic sustainability.

Carbon recovery by fermentation of CO-rich off gases - Turning steel mills into biorefineries.

Science.gov (United States)

Molitor, Bastian; Richter, Hanno; Martin, Michael E; Jensen, Rasmus O; Juminaga, Alex; Mihalcea, Christophe; Angenent, Largus T

2016-09-01

Technological solutions to reduce greenhouse gas (GHG) emissions from anthropogenic sources are required. Heavy industrial processes, such as steel making, contribute considerably to GHG emissions. Fermentation of carbon monoxide (CO)-rich off gases with wild-type acetogenic bacteria can be used to produce ethanol, acetate, and 2,3-butanediol, thereby, reducing the carbon footprint of heavy industries. Here, the processes for the production of ethanol from CO-rich off gases are discussed and a perspective on further routes towards an integrated biorefinery at a steel mill is given. Recent achievements in genetic engineering as well as integration of other biotechnology platforms to increase the product portfolio are summarized. Already, yields have been increased and the portfolio of products broadened. To develop a commercially viable process, however, the extraction from dilute product streams is a critical step and alternatives to distillation are discussed. Finally, another critical step is waste(water) treatment with the possibility to recover resources. Copyright © 2016 Elsevier Ltd. All rights reserved.

An oil palm-based biorefinery concept for cellulosic ethanol and phytochemicals production: Sustainability evaluation using exergetic life cycle assessment

International Nuclear Information System (INIS)

Ofori-Boateng, Cynthia; Lee, Keat Teong

2014-01-01

In this study, thermo-environmental sustainability of an oil palm-based biorefinery concept for the co-production of cellulosic ethanol and phytochemicals from oil palm fronds (OPFs) was evaluated based on exergetic life cycle assessment (ExLCA). For the production of 1 tonne bioethanol, the exergy content of oil palm seeds was upgraded from 236 MJ to 77,999 MJ during the farming process for OPFs production. Again, the high exergy content of the OPFs was degraded by about 62.02% and 98.36% when they were converted into cellulosic ethanol and phenolic compounds respectively. With a total exergy destruction of about 958,606 MJ (internal) and 120,491 MJ (external or exergy of wastes), the biorefinery recorded an overall exergy efficiency and thermodynamic sustainability index (TSI) of about 59.05% and 2.44 per tonne of OPFs' bioethanol respectively. Due to the use of fossil fuels, pesticides, fertilizers and other toxic chemicals during the production, the global warming potential (GWP = 2265.69 kg CO 2 eq.), acidification potential (AP = 355.34 kg SO 2 eq.) and human toxicity potential (HTP = 142.79 kg DCB eq.) were the most significant environmental impact categories for a tonne of bioethanol produced in the biorefinery. The simultaneous saccharification and fermentation (SSF) unit emerged as the most exergetically efficient (89.66%), thermodynamically sustainable (TSI = 9.67) and environmentally friendly (6.59% of total GWP) production system. -- Highlights: • Thermo-environmental sustainability of palm-based biorefinery was assessed. • OPFs' exergy content was degraded when converted into bioethanol and phytochemicals. • Exergy efficiency (59.05%) and TSI (2.44) were recorded for the biorefinery • Global warming potential of 2265.6 kg CO 2 eq. was recorded for the whole biorefinery

Organosolv Fractionation of Softwood Biomass for Biofuel and Biorefinery Applications

Directory of Open Access Journals (Sweden)

Christos Nitsos

2017-12-01

Full Text Available Softwoods represent a significant fraction of the available lignocellulosic biomass for conversion into a variety of bio-based products. Its inherent recalcitrance, however, makes its successful utilization an ongoing challenge. In the current work the research efforts for the fractionation and utilization of softwood biomass with the organosolv process are reviewed. A short introduction into the specific challenges of softwood utilization, the development of the biorefinery concept, as well as the initial efforts for the development of organosolv as a pulping method is also provided for better understanding of the related research framework. The effect of organosolv pretreatment at various conditions, in the fractionation efficiency of wood components, enzymatic hydrolysis and bioethanol production yields is then discussed. Specific attention is given in the effect of the pretreated biomass properties such as residual lignin on enzymatic hydrolysis. Finally, the valorization of organosolv lignin via the production of biofuels, chemicals, and materials is also described.

Economically Viable Components from Jerusalem Artichoke (Helianthus tuberosus L.) in a Biorefinery Concept

Science.gov (United States)

Johansson, Eva; Prade, Thomas; Angelidaki, Irini; Svensson, Sven-Erik; Newson, William R.; Gunnarsson, Ingólfur Bragi; Persson Hovmalm, Helena

2015-01-01

Biorefinery applications are receiving growing interest due to climatic and waste disposal issues and lack of petroleum resources. Jerusalem artichoke (Helianthus tuberosus L.) is suitable for biorefinery applications due to high biomass production and limited cultivation requirements. This paper focuses on the potential of Jerusalem artichoke as a biorefinery crop and the most viable products in such a case. The carbohydrates in the tubers were found to have potential for production of platform chemicals, e.g., succinic acid. However, economic analysis showed that production of platform chemicals as a single product was too expensive to be competitive with petrochemically produced sugars. Therefore, production of several products from the same crop is a must. Additional products are protein based ones from tubers and leaves and biogas from residues, although both are of low value and amount. High bioactive activity was found in the young leaves of the crop, and the sesquiterpene lactones are of specific interest, as other compounds from this group have shown inhibitory effects on several human diseases. Thus, future focus should be on understanding the usefulness of small molecules, to develop methods for their extraction and purification and to further develop sustainable and viable methods for the production of platform chemicals. PMID:25913379

Technoeconomic analysis of biofuels: A wiki-based platform for lignocellulosic biorefineries

DEFF Research Database (Denmark)

Klein-Marcuschamer, Daniel; Oleskowicz-Popiel, Piotr; Simmons, Blake A.

2010-01-01

We present a process model for a lignocellulosic ethanol biorefinery that is open to the biofuels academic community. Beyond providing a series of static results, the wiki-based platform provides a dynamic and transparent tool for analyzing, exploring, and communicating the impact of process adva...

Quantifying Supply Risk at a Cellulosic Biorefinery

Energy Technology Data Exchange (ETDEWEB)

Hansen, Jason K [Idaho National Laboratory; Jacobson, Jacob Jordan [Idaho National Laboratory; Cafferty, Kara Grace [Idaho National Laboratory; Lamers, Patrick [Idaho National Laboratory; Roni, MD S [Idaho National Laboratory

2015-03-01

In order to increase the sustainability and security of the nation’s energy supply, the U.S. Department of Energy through its Bioenergy Technology Office has set a vision for one billion tons of biomass to be processed for renewable energy and bioproducts annually by the year 2030. The Renewable Fuels Standard limits the amount of corn grain that can be used in ethanol conversion sold in the U.S, which is already at its maximum. Therefore making the DOE’s vision a reality requires significant growth in the advanced biofuels industry where currently three cellulosic biorefineries convert cellulosic biomass to ethanol. Risk mitigation is central to growing the industry beyond its infancy to a level necessary to achieve the DOE vision. This paper focuses on reducing the supply risk that faces a firm that owns a cellulosic biorefinery. It uses risk theory and simulation modeling to build a risk assessment model based on causal relationships of underlying, uncertain, supply driving variables. Using the model the paper quantifies supply risk reduction achieved by converting the supply chain from a conventional supply system (bales and trucks) to an advanced supply system (depots, pellets, and trains). Results imply that the advanced supply system reduces supply system risk, defined as the probability of a unit cost overrun, from 83% in the conventional system to 4% in the advanced system. Reducing cost risk in this nascent industry improves the odds of realizing desired growth.

Quantifying Supply Risk at a Cellulosic Biorefinery

Energy Technology Data Exchange (ETDEWEB)

Hansen, Jason K.; Jacobson, Jacob J.; Cafferty, Kara G.; Lamers, Patrick; Roni, Mohammad S.

2015-07-01

In order to increase the sustainability and security of the nation’s energy supply, the U.S. Department of Energy through its Bioenergy Technology Office has set a vision for one billion tons of biomass to be processed for renewable energy and bioproducts annually by the year 2030. The Renewable Fuels Standard limits the amount of corn grain that can be used in ethanol conversion sold in the U.S, which is already at its maximum. Therefore making the DOE’s vision a reality requires significant growth in the advanced biofuels industry where currently three cellulosic biorefineries convert cellulosic biomass to ethanol. Risk mitigation is central to growing the industry beyond its infancy to a level necessary to achieve the DOE vision. This paper focuses on reducing the supply risk that faces a firm that owns a cellulosic biorefinery. It uses risk theory and simulation modeling to build a risk assessment model based on causal relationships of underlying, uncertain, supply driving variables. Using the model the paper quantifies supply risk reduction achieved by converting the supply chain from a conventional supply system (bales and trucks) to an advanced supply system (depots, pellets, and trains). Results imply that the advanced supply system reduces supply system risk, defined as the probability of a unit cost overrun, from 83% in the conventional system to 4% in the advanced system. Reducing cost risk in this nascent industry improves the odds of realizing desired growth.

Ethanol Production by Soy Fiber Treatment and Simultaneous Saccharification and Co-Fermentation in an Integrated Corn-Soy Biorefinery

Directory of Open Access Journals (Sweden)

Jasreen K. Sekhon

2018-05-01

Full Text Available Insoluble fiber (IF recovered from the enzyme-assisted aqueous extraction process (EAEP of soybeans is a fraction rich in carbohydrates and proteins. It can be used to enhance ethanol production in an integrated corn-soy biorefinery, which combines EAEP with traditional corn-based ethanol processing. The present study evaluated IF as a substrate for ethanol production. The effects of treatment of IF (soaking in aqueous ammonia (SAA, liquid hot water (LHW, and enzymatic hydrolysis, primarily simultaneous saccharification and co-fermentation (SSCF, as well as scaling up (250 mL to 60 L on ethanol production from IF alone or a corn and IF slurry were investigated. Enzymatic hydrolysis (pectinase, cellulase, and xylanase, each added at 5% soy solids during simultaneous saccharification and fermentation/SSCF was the best treatment to maximize ethanol production from IF. Ethanol yield almost doubled when SSCF of IF was performed with Saccharomyces cerevisiae and Escherichia coli KO11. Addition of IF in dry-grind corn fermentation increased the ethanol production rate (~31%, but low ethanol tolerance of E. coli KO11 was a limiting factor for employing SSCF in combination corn and IF fermentation. Nonlinear Monod modeling accurately predicted the effect of ethanol concentration on E. coli KO11 growth kinetics by Hanes-Woolf linearization. Collectively, the results from this study suggest a potential of IF as a substrate, alone or in dry-grind corn fermentation, where it enhances the ethanol production rate. IF can be incorporated in the current bioethanol industry with no added capital investment, except enzymes.

Balance and saving of GHG emissions in thermochemical biorefineries

International Nuclear Information System (INIS)

Haro, Pedro; Aracil, Cristina; Vidal-Barrero, Fernando; Ollero, Pedro

2015-01-01

Highlights: • A simplified methodology for the balance and saving of GHG emissions is provided. • The GHG balance has a physical meaning and does not depend on the fossil reference. • The GHG saving depends on regulation of energy carriers. • The impact of Bio-CCS incorporation and multiproduction is analyzed. • The co-production of chemicals needs to be included in future regulation. - Abstract: In this study, a simplified methodology for the calculation of the balance of greenhouse gas (GHG) emissions and corresponding saving compared with the fossil reference is presented. The proposed methodology allows the estimation of the anthropogenic GHG emissions of thermochemical biorefineries (net emitted to the atmosphere). In the calculation of the GHG balance, all relevant factors have been identified and analyzed including multiproduction, emissions from biogenic carbon capture and storage (Bio-CCS), co-feeding of fossil fuels (secondary feedstock) and possible carbon storage in biomass-derived products (chemicals). Therefore, it is possible to calculate the balance of GHG emissions of a hypothetical thermochemical biorefinery considering different alternatives of land-use, biomass feedstock, co-feeding of fossil fuels, Bio-CCS incorporation and final use of the products. The comparison of the estimated GHG balance with the corresponding fossil reference for each product is of special relevance in the methodology since it is the parameter used in European regulation for the fulfillment of sustainability criteria in biomass-derived fuels and liquids. The proposed methodology is tested using a previously assessed set of different process concepts of thermochemical biorefineries (techno-economic analysis). The resulting GHG balance and saving are analyzed to identify uncertainties and provide recommendations for future regulation. In all process concepts, the GHG savings are above the minimum requirement of GHG emissions for 2018. In the case of incorporating

BIOREFINERIES – NEW GREEN STRATEGY FOR DEVELOPMENT OF SMART AND INNOVATIVE INDUSTRY

Directory of Open Access Journals (Sweden)

Grażyna A. PŁAZA

2016-07-01

Full Text Available Ecological engineering or ecotechnology is defined as the design of sustainable production that integrate human society with the natural environment for the benefit of both. In order to reach the goal of sustainability therefore important that bioproduct production systems are converted from to natural cycle oriented. In natural cycles there are not waste, but products are generated at different stages of the cycle. The ecotechnology creates a sustainable bioeconomy using biomass in a smart and efficient way. The biorefining sector, which uses smart, innovative and efficient technologies to convert biomass feedstocks into a range of bio-based products including fuels, chemicals, power, food, and renewable oils, currently presents the innovative and efficient bio-based production can revitalize existing industries. The paper presents the concept of biorefinery as the ecotechnological approach for creating a sustainable bioeconomy using biomass in a smart and efficient way.

Sustainable multipurpose biorefineries for third-generation biofuels and value-added co-products

Science.gov (United States)

Modern biorefinery facilities conduct many types of processes, including those producing advanced biofuels, commodity chemicals, biodiesel, and value-added co-products such as sweeteners and bioinsecticides, with many more co-products, chemicals and biofuels on the horizon. Most of these processes ...

The Chemistry and Technology of Furfural Production in Modern Lignocellulose-Feedstock Biorefineries

NARCIS (Netherlands)

Marcotullio, G.

2011-01-01

This dissertation deals with biorefinery technology development, i.e. with the development of sustainable industrial methods aimed at the production of chemicals, fuels, heat and power from lignocellulosic biomass. This work is particularly focused on the production of furfural from

Current Pretreatment Technologies for the Development of Cellulosic Ethanol and Biorefineries.

Science.gov (United States)

Silveira, Marcos Henrique Luciano; Morais, Ana Rita C; da Costa Lopes, Andre M; Olekszyszen, Drielly Nayara; Bogel-Łukasik, Rafał; Andreaus, Jürgen; Pereira Ramos, Luiz

2015-10-26

Lignocellulosic materials, such as forest, agriculture, and agroindustrial residues, are among the most important resources for biorefineries to provide fuels, chemicals, and materials in such a way to substitute for, at least in part, the role of petrochemistry in modern society. Most of these sustainable biorefinery products can be produced from plant polysaccharides (glucans, hemicelluloses, starch, and pectic materials) and lignin. In this scenario, cellulosic ethanol has been considered for decades as one of the most promising alternatives to mitigate fossil fuel dependence and carbon dioxide accumulation in the atmosphere. However, a pretreatment method is required to overcome the physical and chemical barriers that exist in the lignin-carbohydrate composite and to render most, if not all, of the plant cell wall components easily available for conversion into valuable products, including the fuel ethanol. Hence, pretreatment is a key step for an economically viable biorefinery. Successful pretreatment method must lead to partial or total separation of the lignocellulosic components, increasing the accessibility of holocellulose to enzymatic hydrolysis with the least inhibitory compounds being released for subsequent steps of enzymatic hydrolysis and fermentation. Each pretreatment technology has a different specificity against both carbohydrates and lignin and may or may not be efficient for different types of biomasses. Furthermore, it is also desirable to develop pretreatment methods with chemicals that are greener and effluent streams that have a lower impact on the environment. This paper provides an overview of the most important pretreatment methods available, including those that are based on the use of green solvents (supercritical fluids and ionic liquids). © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Fostering Integrity in Research

Science.gov (United States)

McNutt, M. K.

2017-12-01

The responsible conduct of research requires that all involved in the research enterprise - researchers, sponsors, reviewers, publishers, and communicators - adhere to a set of integrity principles to protect the public's investment. Given the increasing complexity and globalization of the research enterprise, the National Academies recently re-examined and updated its integrity recommendations for researchers in the report Fostering Integrity in Research, with sponsorship from the National Science Foundation. Major departures from the previous recommendations 25-years earlier are the recognition that practices that were previously classified as merely questionable are indeed detrimental to the responsible conduct of research. Furthermore, the report concludes that there has been insufficient effort to respond to the threats that lapses in research integrity pose to the quality of research products and the reputation of researchers as deserving of the public trust. It recommends the creation of an independent, non-profit entity dedicated to promoting research integrity by serving as a resource and clearing house for expertise, advice, materials, and best practices on fostering research integrity and responding to allegations of research misconduct.

Cell disruption and lipid extraction for microalgal biorefineries: A review.

Science.gov (United States)

Lee, Soo Youn; Cho, Jun Muk; Chang, Yong Keun; Oh, You-Kwan

2017-11-01

The microalgae-based biorefinement process has attracted much attention from academic and industrial researchers attracted to its biofuel, food and nutraceutical applications. In this paper, recent developments in cell-disruption and lipid-extraction methods, focusing on four biotechnologically important microalgal species (namely, Chlamydomonas, Haematococcus, Chlorella, and Nannochloropsis spp.), are reviewed. The structural diversity and rigidity of microalgal cell walls complicate the development of efficient downstream processing methods for cell-disruption and subsequent recovery of intracellular lipid and pigment components. Various mechanical, chemical and biological cell-disruption methods are discussed in detail and compared based on microalgal species and status (wet/dried), scale, energy consumption, efficiency, solvent extraction, and synergistic combinations. The challenges and prospects of the downstream processes for the future development of eco-friendly and economical microalgal biorefineries also are outlined herein. Copyright © 2017 Elsevier Ltd. All rights reserved.

Recovery Act – Integrated Pilot-Scale Biorefinery for Producing Ethanol from Hybrid Algae

Energy Technology Data Exchange (ETDEWEB)

Legere, Ed [Algenol Biotech LLC, Ft. Myers, FL (United States); Roessler, Paul [Algenol Biotech LLC, Ft. Myers, FL (United States); Miller, Harlan [Algenol Biotech LLC, Ft. Myers, FL (United States); Belicka, Laura [Algenol Biotech LLC, Ft. Myers, FL (United States); Yuan, Yanhui [Algenol Biotech LLC, Ft. Myers, FL (United States); Chance, Ron [Algenol Biotech LLC, Ft. Myers, FL (United States); Dalrymple, Kofi [Algenol Biotech LLC, Ft. Myers, FL (United States); Porubsky, William [Algenol Biotech LLC, Ft. Myers, FL (United States); Coleman, John [Algenol Biotech LLC, Ft. Myers, FL (United States); Sweeney, Kevin [Algenol Biotech LLC, Ft. Myers, FL (United States); Ahlm, Pat [Algenol Biotech LLC, Ft. Myers, FL (United States); Ha, Quang [Algenol Biotech LLC, Ft. Myers, FL (United States)

2017-05-26

As a scientific and engineering endeavor, the Algenol IBR Biorefinery project has been a success by almost any measure. The vision for the system evolved significantly over the course of the project, always due to recognized opportunities for improved performance, lower energy consumption, and reduced costs. Our commitment to thorough, realistic, techno-economic and life cycle assessments has been an essential element for system innovation, technology guidance, and change management of the overall facility. The biological tools developed during this program for cyanobacteria are second to none, and are the primary reason for the remarkable improvements in organism performance. The breakthrough was the successful transformation of our most robust wild type organism (AB1) early in 2012. That was followed by a series of improvements over the next several years that produced strains wherein over 80% of the fixed carbon was converted into ethanol. At the same time, our expertise in cultivation, physiology, process engineering, CO2 management, and photobioreactor design and manufacturing grew at a comparable pace. We learned enormous amounts from the various upsets, weather variations, contamination events, and new technology related disappointments. We overcame those challenges to produce fuel grade ethanol with a low carbon footprint, and are within striking distance of economic viability even with the challenges of low fossil fuel prices.

Waste biorefinery models towards sustainable circular bioeconomy: Critical review and future perspectives.

Science.gov (United States)

Venkata Mohan, S; Nikhil, G N; Chiranjeevi, P; Nagendranatha Reddy, C; Rohit, M V; Kumar, A Naresh; Sarkar, Omprakash

2016-09-01

Increased urbanization worldwide has resulted in a substantial increase in energy and material consumption as well as anthropogenic waste generation. The main source for our current needs is petroleum refinery, which have grave impact over energy-environment nexus. Therefore, production of bioenergy and biomaterials have significant potential to contribute and need to meet the ever increasing demand. In this perspective, a biorefinery concept visualizes negative-valued waste as a potential renewable feedstock. This review illustrates different bioprocess based technological models that will pave sustainable avenues for the development of biobased society. The proposed models hypothesize closed loop approach wherein waste is valorised through a cascade of various biotechnological processes addressing circular economy. Biorefinery offers a sustainable green option to utilize waste and to produce a gamut of marketable bioproducts and bioenergy on par to petro-chemical refinery. Copyright © 2016 Elsevier Ltd. All rights reserved.

Biorefinery lignosulfonates from sulfite-pretreated softwoods as dispersant for graphite

Science.gov (United States)

Yanlin Qin; Lixuan Yu; Ruchun Wu; Dongjie Yang; Xueqing Qiu; Junyong Zhu

2016-01-01

Two biorefinery lignosulfonates (LSs), Ca-LS-DF and Na-LS-LP were, respectively, isolated from pilot-scale sulfite-pretreated spent liquor of lodgepole pine and fermentation residue of Douglas-fir harvest forest residue. The molecular weights of Na-LS-LP and Ca-LS-DF were approximately 9 000 and 11 000 Da, respectively. The two LSs were applied as dispersant for...

Spatially and Temporally Optimal Biomass Procurement Contracting for Biorefineries

Directory of Open Access Journals (Sweden)

Subbu Kumarappan

2014-02-01

Full Text Available This paper evaluates the optimal composition of annual and perennial biomass feedstocks for a biorefinery. A generic optimization model is built to minimize costs – harvest, transport, storage, seasonal, and environmental costs – subject to various constraints on land availability, feedstock availability, processing capacity, contract terms, and storage losses. The model results are demonstrated through a case study for a midwestern U.S. location, focusing on bioethanol as the likely product. The results suggest that high-yielding energy crops feature prominently (70 to 80% in the feedstock mix in spite of the higher establishment costs. The cost of biomass ranges from 0.16 to 0.20 $ l-1 (US$ 0.60 to $0.75 per gallon of biofuel. The harvest shed shows that high-yielding energy crops are preferably grown in fields closer to the biorefinery. Low-yielding agricultural residues primarily serve as a buffer crop to meet the shortfall in biomass requirement. For the case study parameters, the model results estimated a price premium for energy crops (2 to 4 $ t-1 within a 16 km (10-mile radius and agricultural residues (5 to 17 $ t-1 in a 16 to 20 km (10 to 20 mile radius.

Plus 10 million tons plan. Feasible increased Danish production of sustainable biomass for bio-refineries; + 10 mio. tons planen - muligheder for en oeget dansk produktion af baeredygtig biomasse til bioraffinaderier

Energy Technology Data Exchange (ETDEWEB)

Gylling, M.; Scott Bentsen, N.; Felby, C.; Kvist Johannsen, V. (Koebenhavns Univ., Frederiksberg (Denmark)); Joergensen, Uffe; Kristensen, Inge T.; Dalgaard, T. (Aarhus Univ., Aarhus (Denmark))

2012-07-01

The desire to create sustainable solutions in the energy sector has led researchers at the University of Copenhagen, Aarhus University and research and development staff from DONG Energy to enter into a cooperation agreement that will start concrete initiatives in research and education in green energy. An important part of the collaboration is a study of how we can produce more biomass compared to today without compromising food production, feed production or the environment. The present study shows that it can be done through a total commitment to sustainable technology and biology. The report also describes the effects of the establishment of a Danish supplied bio-refinery sector. In order to achieve this required additional research and development is required, particularly in agriculture and forestry but also in biological and chemical conversion of biomass. The initiative supports the BioRefining Alliance, which brings together Danish companies, public partners and organizations with world-class knowledge and technologies for bio-refinery. (LN)

Potential of Jerusalem artichoke (Helianthus tuberosus L.) as a biorefinery crop

DEFF Research Database (Denmark)

Gunnarsson, Ingólfur Bragi; Svensson, S.-E.; Johansson, E.

2014-01-01

The utilization of Jerusalem artichoke in a biorefinery context was not investigated so far. Therefore the aim of this study was to evaluate the potential of this plant as feedstock for production of bioethanol, protein and inulin. We investigated the biomass productivity and chemical composition...... of Jerusalem artichoke. Although not high (in total

Crude protein yield and theoretical extractable true protein of potential biorefinery feedstocks

DEFF Research Database (Denmark)

Solati, Zeinab; Manevski, Kiril; Jørgensen, Uffe

2018-01-01

for supplying biomass to biorefineries. Field experiments during 2013–2014 with perennial crops (pure grasses: cocksfoot, festulolium, reed canary, tall fescue, two miscanthus species and two grass-legume mixtures) and annual crops in optimized rotations (winter rye, sugar beet, maize, triticale, hemp and grass...

Value chains for biorefineries of wastes from food production and services - ValueWaste

Energy Technology Data Exchange (ETDEWEB)

Kahiluoto, H.; Kuisma, M.; Knuuttila, M. (and others) (MTT Agrifood Research Finland, Mikkeli (Finland)). Email: helena.kahiluoto@mtt.fi

2010-10-15

The aim of the ValueWaste project is to analyse biomass potentials, appropriate technologies and business opportunities. Contrasting regional scenarios for biorefinery activities are developed, and their overall sustainability is assessed: environmental impacts using life cycle assessment, impacts on regional economy, partnership in actor chains, as well as business opportunities and possibilities for commercialisation are considered. South Savo and partly Satakunta provide the case study regions, but the project also produces tools for generalisation and contributes to national solutions. The theoretical potentials suggest that the agrifood waste has a significant and currently untapped potential for replacing non-renewable energy and recycling nutrients, and further for climate and water protection. The volume of agrifood waste varies mainly according to animal husbandry, crop production and food processing of a region. New business opportunities were found from the value chain of biowaste flows in the area of Etelae-Savo. Unexploited raw materials and new methods in waste collection and transportation offer entrepreneurial opportunities and decrease the costs of operation. Based on the conceptual work for creation of the contrasting regional biorefinery scenarios, performed in workshops for project and steering group members, four different optimisation starting points were determined: 1) replacement of fossil energy; 2) maximisation of carbon sequestration; 3) water protection and 4) enhancement of regional economy. Present situation of the biomass utilisation in the region was adopted as the baseline scenario. Four contrasting, consistent scenarios for the value chain of waste-based biorefineries are formed in South Savo. (orig.)

Life cycle assessment of castor-based biorefinery: a well to wheel LCA

DEFF Research Database (Denmark)

Khoshnevisan, Benyamin; Rafiee, Shahin; Tabatabaei, Meisam

2017-01-01

of their ability in converting biomass into a spectrum of marketable products and bioenergies. This study was aimed at developing different novel castor-based biorefinery scenarios for generating biodiesel and other co-products, i.e., ethanol and biogas. In these scenarios, glycerin, heat, and electricity were...

Identification of an industrial microalgal strain for starch production in biorefinery context

NARCIS (Netherlands)

Gifuni, Imma; Olivieri, Giuseppe; Pollio, Antonino; Marzocchella, Antonio

2018-01-01

The recent trends in microalgal cultures are focused on the biorefinery of the biomass components. Some of them are not completely valorised, for example starch. Since there is a wide market for starch products in food and non-food industries, the exploitation of microalgal starch fractions could

Investigation of uncertainties associated with the production of n-butanol through ethanol catalysis in sugarcane biorefineries.

Science.gov (United States)

Pereira, Lucas G; Dias, Marina O S; MacLean, Heather L; Bonomi, Antonio

2015-08-01

This study evaluated the viability of n-butanol production integrated within a first and second generation sugarcane biorefinery. The evaluation included a deterministic analysis as well as a stochastic approach, the latter using Monte Carlo simulation. Results were promising for n-butanol production in terms of revenues per tonne of processed sugarcane, but discouraging with respect to internal rate of return (IRR). The uncertainty analysis determined there was high risk involved in producing n-butanol and co-products from ethanol catalysis. It is unlikely that these products and associated production route will be financially attractive in the short term without lower investment costs, supportive public policies and tax incentives coupled with biofuels' production strategies. Copyright © 2015 Elsevier Ltd. All rights reserved.

Biorefinery Analysis

Energy Technology Data Exchange (ETDEWEB)

2016-06-01

Fact sheet summarizing NREL's techno-economic analysis and life-cycle assessment capabilities to connect research with future commercial process integration, a critical step in the scale-up of biomass conversion technologies.

Biorefineries for the production of top building block chemicals and their derivatives.

Science.gov (United States)

Choi, Sol; Song, Chan Woo; Shin, Jae Ho; Lee, Sang Yup

2015-03-01

Due to the growing concerns on the climate change and sustainability on petrochemical resources, DOE selected and announced the bio-based top 12 building blocks and discussed the needs for developing biorefinery technologies to replace the current petroleum based industry in 2004. Over the last 10 years after its announcement, many studies have been performed for the development of efficient technologies for the bio-based production of these chemicals and derivatives. Now, ten chemicals among these top 12 chemicals, excluding the l-aspartic acid and 3-hydroxybutyrolactone, have already been commercialized or are close to commercialization. In this paper, we review the current status of biorefinery development for the production of these platform chemicals and their derivatives. In addition, current technological advances on industrial strain development for the production of platform chemicals using micro-organisms will be covered in detail with case studies on succinic acid and 3-hydroxypropionic acid as examples. Copyright © 2015 International Metabolic Engineering Society. Published by Elsevier Inc. All rights reserved.

Chapter 17: Adding Value to the Biorefinery with Lignin: An Engineer's Perspective

Energy Technology Data Exchange (ETDEWEB)

Biddy, Mary J [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2018-04-03

There is a long-standing belief that 'you can make anything out of lignin...except money.' This chapter serves to highlight that opportunities for making money from biomass-derived lignin exist both with current technology in the production of steam and power to new emerging areas of R&D focused on value-added chemical and material coproducts from lignin. To understand and quantify the economic potential for lignin valorization, the techno-economic analysis methodology is first described in detail. As demonstrated in the provided case study, these types of economic evaluations serve not only to estimate the economic impacts that lignin conversion could have for an integrated biorefinery and outline drivers for further cost reduction but also identify data gaps and R&D needs for improving the design basis and reducing the risk for process scale-up.

Bioenergy research advances and applications

CERN Document Server

Gupta, Vijai G; Kubicek, Christian P; Saddler, Jack; Xu, Feng

2014-01-01

Bioenergy Research: Advances and Applications brings biology and engineering together to address the challenges of future energy needs. The book consolidates the most recent research on current technologies, concepts, and commercial developments in various types of widely used biofuels and integrated biorefineries, across the disciplines of biochemistry, biotechnology, phytology, and microbiology. All the chapters in the book are derived from international scientific experts in their respective research areas. They provide you with clear and concise information on both standard and more recent bioenergy production methods, including hydrolysis and microbial fermentation. Chapters are also designed to facilitate early stage researchers, and enables you to easily grasp the concepts, methodologies and application of bioenergy technologies. Each chapter in the book describes the merits and drawbacks of each technology as well as its usefulness. The book provides information on recent approaches to graduates, post...

Biorefinery production of poly-3-hydroxybutyrate using waste office paper hydrolysate as feedstock for microbial fermentation.

Science.gov (United States)

Neelamegam, Annamalai; Al-Battashi, Huda; Al-Bahry, Saif; Nallusamy, Sivakumar

2018-01-10

Waste paper, a major fraction of municipal solid waste, has a potential to serve as renewable feedstock for the biorefineries of fuels, chemicals and materials due to rich in cellulose and abundant at low cost. This study evaluates the possibility of waste office paper (WOP) to serve as a potential feedstock for the biorefinery production of poly (3-hydroxybutyrate). In this study, the WOP was pretreated, enzymatically saccharified and the hydrolysate was used for PHB production. The hydrolysate mainly consists of glucose (22.70g/L) and xylose (1.78g/L) and the corresponding sugar yield was about 816mg/g. Ammonium sulphate and C/N ratio 20 were identified as most favorable for high yield of PHB. The batch fermentation of Cupriavidus necator using the pretreated WOP hydrolysate resulted in cell biomass, PHB production and PHB content of 7.74g/L, 4.45g/L and 57.52%, respectively. The volumetric productivity and yield achieved were 0.061g/L/h and 0.210g/g sugar, respectively. The results suggested that WOP could be a potential alternative feedstock for the biorefinery production of bioplastics. Copyright © 2017 Elsevier B.V. All rights reserved.

Federal Air Pollutant Emission Regulations and Preliminary Estimates of Potential-to-Emit from Biorefineries, Pathway #2: Conversion of Lignocellulosic Biomass to Hydrocarbon Fuels: Fast Pyrolysis and Hydrotreating Bio-oil Pathway

Energy Technology Data Exchange (ETDEWEB)

Bhatt, Arpit [National Renewable Energy Lab. (NREL), Golden, CO (United States). Strategic Energy Analysis Center. Technology Systems and Sustainability Analysis Group; Zhang, Yimin [National Renewable Energy Lab. (NREL), Golden, CO (United States). Strategic Energy Analysis Center. Technology Systems and Sustainability Analysis Group; Heath, Garvin [National Renewable Energy Lab. (NREL), Golden, CO (United States). Strategic Energy Analysis Center. Technology Systems and Sustainability Analysis Group; Thomas, Mae [Eastern Research Group, Research Triangle Park, NC (United States); Renzaglia, Jason [Eastern Research Group, Research Triangle Park, NC (United States)

2017-01-01

Biorefineries are subject to environmental laws, including complex air quality regulations that aim to protect and improve the quality of the air. These regulations govern the amount of certain types of air pollutants that can be emitted from different types of emission sources. To determine which federal air emission regulations potentially apply to the fast pyrolysis biorefinery, we first identified the types of regulated air pollutants emitted to the ambient environment by the biorefinery or from specific equipment. Once the regulated air pollutants are identified, we review the applicability criteria of each federal air regulation to determine whether the fast pyrolysis biorefinery or specific equipment is subject to it. We then estimate the potential-to-emit of pollutants likely to be emitted from the fast pyrolysis biorefinery to understand the air permitting requirements.

Succinic Acid as a Byproduct in a Corn-based Ethanol Biorefinery

Energy Technology Data Exchange (ETDEWEB)

MBI International

2007-12-31

MBI endeavored to develop a process for succinic acid production suitable for integration into a corn-based ethanol biorefinery. The project investigated the fermentative production of succinic acid using byproducts of corn mill operations. The fermentation process was attuned to include raw starch, endosperm, as the sugar source. A clean-not-sterile process was established to treat the endosperm and release the monomeric sugars. We developed the fermentation process to utilize a byproduct of corn ethanol fermentations, thin stillage, as the source of complex nitrogen and vitamin components needed to support succinic acid production in A. succinogenes. Further supplementations were eliminated without lowering titers and yields and a productivity above 0.6 g l-1 hr-1was achieved. Strain development was accomplished through generation of a recombinant strain that increased yields of succinic acid production. Isolation of additional strains with improved features was also pursued and frozen stocks were prepared from enriched, characterized cultures. Two recovery processes were evaluated at pilot scale and data obtained was incorporated into our economic analyses.

Dual purpose microalgae-bacteria-based systems that treat wastewater and produce biodiesel and chemical products within a biorefinery.

Science.gov (United States)

Olguín, Eugenia J

2012-01-01

, are highlighted as very relevant fields of research. The species selection may depend on various factors, such as the biomass and lipid productivity of each strain, the characteristics of the wastewater, the original habitat of the strain and the climatic conditions in the treatment plant, among others. Some alternative technologies aimed at harvesting biomass at a low cost, such as cell immobilization, biofilm formation, flocculation and bio-flocculation, are also reviewed. Finally, a Biorefinery design is presented that integrates the treatment of municipal wastewater with the recovery of oleaginous microalgae, together with the use of seawater supplemented with anaerobically digested piggery waste for cultivating Arthrospira (Spirulina) and producing biogas, biodiesel, hydrogen and other high added value products. Such strategies offer new opportunities for the cost-effective and competitive production of biofuels along with valuable non-fuel products. Copyright © 2012 Elsevier Inc. All rights reserved.

Grid Integration Research | Wind | NREL

Science.gov (United States)

Grid Integration Research Grid Integration Research Researchers study grid integration of wind three wind turbines with transmission lines in the background. Capabilities NREL's grid integration electric power system operators to more efficiently manage wind grid system integration. A photo of

Development of the Nordic Bioeconomy: NCM reporting: Test centers for green energy solutions - Biorefineries and business needs

DEFF Research Database (Denmark)

Lange, Lene; Björnsdóttir, Bryndís; Brandt, Asbjørn

In 2014 the Nordic Council of Ministers initiated a new bioeconomy project: “Test centers for green energy solutions – Biorefineries and Busi-ness needs”. The purpose was to strengthen green growth in the area of the bioeconomy by analyzing and mapping the current status of the bio-economy in the......In 2014 the Nordic Council of Ministers initiated a new bioeconomy project: “Test centers for green energy solutions – Biorefineries and Busi-ness needs”. The purpose was to strengthen green growth in the area of the bioeconomy by analyzing and mapping the current status of the bio...

Development of a biorefinery optimized biofuel supply curve for the Western United States

International Nuclear Information System (INIS)

Parker, Nathan; Tittmann, Peter; Hart, Quinn; Nelson, Richard; Skog, Ken; Schmidt, Anneliese; Gray, Edward; Jenkins, Bryan

2010-01-01

A resource assessment and biorefinery siting optimization model was developed and implemented to assess potential biofuel supply across the Western United States from agricultural, forest, urban, and energy crop biomass. Spatial information including feedstock resources, existing and potential refinery locations and a transportation network model is provided to a mixed integer-linear optimization model that determines the optimal locations, technology types and sizes of biorefineries to satisfy a maximum profit objective function applied across the biofuel supply and demand chain from site of feedstock production to the product fuel terminal. The resource basis includes preliminary considerations of crop and residue sustainability. Sensitivity analyses explore possible effects of policy and technology changes. At a target market price of 19.6 $ GJ -1 , the model predicts a feasible production level of 610-1098 PJ, enough to supply up to 15% of current regional liquid transportation fuel demand. (author)

Potential of bioethanol as a chemical building block for biorefineries: preliminary sustainability assessment of 12 bioethanol-based products.

Science.gov (United States)

Posada, John A; Patel, Akshay D; Roes, Alexander; Blok, Kornelis; Faaij, André P C; Patel, Martin K

2013-05-01

The aim of this study is to present and apply a quick screening method and to identify the most promising bioethanol derivatives using an early-stage sustainability assessment method that compares a bioethanol-based conversion route to its respective petrochemical counterpart. The method combines, by means of a multi-criteria approach, quantitative and qualitative proxy indicators describing economic, environmental, health and safety and operational aspects. Of twelve derivatives considered, five were categorized as favorable (diethyl ether, 1,3-butadiene, ethyl acetate, propylene and ethylene), two as promising (acetaldehyde and ethylene oxide) and five as unfavorable derivatives (acetic acid, n-butanol, isobutylene, hydrogen and acetone) for an integrated biorefinery concept. Copyright © 2012 Elsevier Ltd. All rights reserved.

Enzymatic cell disruption of microalgae biomass in biorefinery processes.

Science.gov (United States)

Demuez, Marie; Mahdy, Ahmed; Tomás-Pejó, Elia; González-Fernández, Cristina; Ballesteros, Mercedes

2015-10-01

When employing biotechnological processes for the procurement of biofuels and bio-products from microalgae, one of the most critical steps affecting economy and yields is the "cell disruption" stage. Currently, enzymatic cell disruption has delivered effective and cost competitive results when compared to mechanical and chemical cell disruption methods. However, the introduction of enzymes implies additional associated cost within the overall process. In order to reduce this cost, autolysis of microalgae is proposed as alternative enzymatic cell disruption method. This review aims to provide the state of the art of enzymatic cell disruption treatments employed in biorefinery processes and highlights the use of endopeptidases. During the enzymatic processes of microalgae life cycle, some lytic enzymes involved in cell division and programmed cell death have been proven useful in performing cell lysis. In this context, the role of endopeptidases is emphasized. Mirroring these natural events, an alternative cell disruption approach is proposed and described with the potential to induce the autolysis process using intrinsic cell enzymes. Integrating induced autolysis within biofuel production processes offers a promising approach to reduce overall global costs and energetic input associated with those of current cell disruption methods. A number of options for further inquiry are also discussed. © 2015 Wiley Periodicals, Inc.

[Promoting Research Integrity].

Science.gov (United States)

Suzuki, Hiromichi

2018-01-01

　Japan Agency for Medical Research and Development (AMED) was launched in April 2015 to promote integrated medical research and development (R&D) ranging from basic research to practical applications, in order to smoothly achieve the nationwide application of research outcomes, and to establish an environment therefor. AMED consolidates budgets for R&D expenses, which had previously been allocated from different sources, such as the Ministry of Education, Culture, Sports, Science and Technology, the Ministry of Health, Labour and Welfare, and the Ministry of Economy, Trade and Industry. It provides funds strategically to universities, research institutions, etc. By promoting medical R&D, AMED aims to achieve the world's highest level of medical care/services to contribute to a society in which people live long and healthy lives. To achieve this mission, it is imperative that R&D funded by AMED is widely understood and supported. Maintaining and improving research integrity is a prerequisite to this end. AMED is taking various measures to ensure fair and appropriate R&D. It is asking researchers to participate in its responsible conduct in research (RCR) education program and to comply with its rules for managing conflicts of interest (COI). In addition, AMED also conducts a grant program to create and distribute a variety of educational materials on RCR and other matters. Further, AMED is establishing a platform that allows researchers to exchange information about research integrity, and it is undertaking additional measures, such as holding meetings and international symposia on research integrity.

First workshop on the possibilities of biorefinery concepts for the industry : held at hotel "De Wageningse Berg", Wageningen, the Netherlands (16 June 2006) : official minutes

NARCIS (Netherlands)

Annevelink, E.; Jong, de E.; Ree, van R.; Zwart, R.W.R.

2006-01-01

On June the 16th the first ¿workshop on the possibilities of biorefinery concepts for the industry¿ was held, bringing together different Dutch stakeholders, and addressing common as well as conflicting technical and market issues with regard to biorefinery opportunities. The first-of-akind workshop

Pyrolysis based bio-refinery for the production of bioethanol from demineralized ligno-cellulosic biomass

NARCIS (Netherlands)

Luque, L.; Westerhof, Roel Johannes Maria; van Rossum, G.; Oudenhoven, Stijn; Kersten, Sascha R.A.; Berruti, F.; Rehmann, L.

2014-01-01

This paper evaluates a novel biorefinery approach for the conversion of lignocellulosic biomass from pinewood. A combination of thermochemical and biochemical conversion was chosen with the main product being ethanol. Fast pyrolysis of lignocellulosic biomasss with fractional condensation of the

Scenario optimization modeling approach for design and management of biomass-to-biorefinery supply chain system.

Science.gov (United States)

Sharma, Bhavna; Ingalls, Ricki G; Jones, Carol L; Huhnke, Raymond L; Khanchi, Amit

2013-12-01

The aim of this study was to develop a scenario optimization model to address weather uncertainty in the Biomass Supply Chain (BSC). The modeling objective was to minimize the cost of biomass supply to biorefineries over a one-year planning period using monthly time intervals under different weather scenarios. The model is capable of making strategic, tactical and operational decisions related to BSC system. The performance of the model was demonstrated through a case study developed for Abengoa biorefinery in Kansas. Sensitivity analysis was done to demonstrate the effect of input uncertainty in yield, land rent and storage dry matter loss on the model outputs. The model results show that available harvest work hours influence major cost-related decisions in the BSC. Copyright © 2013 Elsevier Ltd. All rights reserved.

Identifying the point of departures for the detailed sustainability assessment of biomass feedstocks for biorefinery

DEFF Research Database (Denmark)

Parajuli, Ranjan; Knudsen, Marie Trydeman; Dalgaard, Tommy

for biorefineries and potential impacts to the existing market. This study aims to assist in the sustainability assessment of straw conversion in the biochemical conversion routes to deliver bioethanol and other biobased products. For the comparison, conversion of straw to produce heat and electricity in a Combined......In the light of sustainable development in the energy sector, biomasses have gained increasing attention, which have exacerbated competition among them. Biorefineries are increasing its hold in developed economies, since it facilitates the delivery of multiple products including food, feed...... and fuels. Lignocelluloses (e.g straw) are one of the important biomasses considered in such transition. Meanwhile, it is also relevant to examine how the current utilization of biomasses are taking place and the related environmental and economic burdens. This also allows to compare the sustainability...

Biorefinery methods for separation of protein and oil fractions from rubber seed kernel

NARCIS (Netherlands)

Widyarani, R.; Ratnaningsih, E.; Sanders, J.P.M.; Bruins, M.E.

2014-01-01

Biorefinery of rubber seeds can generate additional income for farmers, who already grow rubber trees for latex production. The aim of this study was to find the best method for protein and oil production from rubber seed kernel, with focus on protein recovery. Different pre-treatments and oil

Roadmap biorefineries within the scope of action plans of the Federal Government for the material and energetic utilization of renewable raw materials; Roadmap Bioraffinerien im Rahmen der Aktionsplaene der Bundesregierung zur stofflichen und energetischen Nutzung nachwachsender Rohstoffe

Energy Technology Data Exchange (ETDEWEB)

NONE

2012-05-15

In order to determine the current status and the further energy demand of different biorefinery concepts, the Federal Government has announced the development of a 'Roadmap biorefineries' under involvement of business and science. This comprehensive overview on different technologies and on possibilities of realization now is available and includes the following aspects: (1) Biorefineries in te context of utilizing biomass; (2) Definition and systematics of biorefineries, state of the art and initial situation; (3) Technological description and analysis; (4) Economic and ecologic classification; (5) Challenges of the establishment of biorefineries - SWOT analysis; (6) need for action.

Federal Air Pollutant Emission Regulations and Preliminary Estimates of Potential-to-Emit from Biorefineries. Pathway #1: Dilute-Acid and Enzymatic Deconstruction of Biomass-to-Sugars and Biological Conversion of Sugars-to-Hydrocarbons

Energy Technology Data Exchange (ETDEWEB)

Zhang, Yimin [National Renewable Energy Lab. (NREL), Golden, CO (United States); Bhatt, Arpit [National Renewable Energy Lab. (NREL), Golden, CO (United States); Heath, Garvin [National Renewable Energy Lab. (NREL), Golden, CO (United States); Thomas, Mae [Eastern Research Group, Lexington, MA (United States); Renzaglia, Jason [Eastern Research Group, Lexington, MA (United States)

2016-02-01

Biorefineries are subject to environmental laws, including complex air quality regulations that aim to protect and improve the quality of the air. These regulations govern the amount of certain types of air pollutants that can be emitted from different types of emission sources. To determine which federal air emission regulations potentially apply to the sugars-to-hydrocarbon (HC) biorefinery, we first identified the types of regulated air pollutants emitted to the ambient environment by the biorefinery or from specific equipment. Once the regulated air pollutants are identified, we review the applicability criteria of each federal air regulation to determine whether the sugars-to-HC biorefinery or specific equipment is subject to it. We then estimate the potential-to-emit of pollutants likely to be emitted from the sugars-to-HC biorefinery to understand the air permitting requirements.

Development of a biorefinery optimized biofuel supply curve for the western United States

Science.gov (United States)

Nathan Parker; Peter Tittmann; Quinn Hart; Richard Nelson; Ken Skog; Anneliese Schmidt; Edward Gray; Bryan Jenkins

2010-01-01

A resource assessment and biorefinery siting optimization model was developed and implemented to assess potential biofuel supply across the Western United States from agricultural, forest, urban, and energy crop biomass. Spatial information including feedstock resources, existing and potential refinery locations and a transportation network model is provided to a mixed...

Valorization of lignin from biorefineries for fuels and chemicals

DEFF Research Database (Denmark)

Nielsen, Joachim Bachmann

Direct lignin liquefaction is a promising process for lignin valorization in which ligninis treated in a solvent at elevated temperature and pressure. Liquefaction of sulfur freelignin obtained as a waste product from 2nd generation bio-ethanol production canprovide a sulfur free bio-oil which may...... substitute fossil fuel.In this Ph.D. study the direct liquefaction of a biorefinery lignin (hydrothermallypretreated enzymatic hydrolysis lignin) is explored. The goal is to provide a bio-crude which can substitute marine diesel as the engines found aboard large ships are adapted to more crude fuels. A novel...

Biorefinery of the green seaweed Ulva lactuca to produce animal feed, chemicals and biofuels

NARCIS (Netherlands)

Bikker, Paul; Krimpen, van Marinus M.; Wikselaar, van Piet; Houweling-Tan, Bwee; Scaccia, Nazareno; Hal, van Jaap W.; Huijgen, Wouter J.J.; Cone, John W.; López-Contreras, Ana M.

2016-01-01

The growing world population demands an increase in animal protein production. Seaweed may be a valuable source of protein for animal feed. However, a biorefinery approach aimed at cascading valorisation of both protein and non-protein seaweed constituents is required to realise an economically

Project Independence: Construction of an Integrated Biorefinery for Production of Renewable Biofuels at an Existing Pulp and Paper Mill

Energy Technology Data Exchange (ETDEWEB)

Freeman, Douglas

2012-06-01

Project Independence proposed to construct a demonstration biomass-to-liquids (BTL) biorefinery in Wisconsin Rapids, isconsin. The biorefinery was to be co-located at the existing pulp and paper mill, NewPage Wisconsin System Incorporated’s Wisconsin Rapids Mill, and when in full operation would both generate renewable energy for Wisconsin Rapids Mill and produce liquid fuels from abundant and renewable lignocellulosic biomass. The biorefinery would serve to validate the thermochemical pathway and economic models for BTL production using forest residuals and wood waste, providing a basis for proliferating BTL conversion technologies throughout the United States. It was a project goal to create a compelling new business model for the pulp and paper industry, and support the nation’s goal for increasing renewable fuels production and reducing its dependence on foreign oil. NewPage Corporation planned to replicate this facility at other NewPage Corporation mills after this first demonstration scale plant was operational and had proven technical and economic feasibility. An overview of the process begins with biomass being harvested, sized, conditioned and fed into a ThermoChem Recovery International (TRI) steam reformer where it is converted to high quality synthetic gas (syngas). The syngas is then cleaned, compressed, scrubbed, polished and fed into the Fischer-Tropsch (F-T) catalytic reactors where the gas is converted into two, sulfur-free, clean crude products which will be marketed as revenue generating streams. Additionally, the Fischer-Tropsch products could be upgraded for use in automotive, aviation and chemical industries as valuable products, if desired. As the Project Independence project set out to prove forest products could be used to commercially produce biofuels, they planned to address and mitigate issues as they arose. In the early days of the Project Independence project, the plant was sized to process 500 dry tons of biomass per day but would

Thermochemical hydrolysis of macroalgae Ulva for biorefinery: Taguchi robust design method

Science.gov (United States)

Jiang, Rui; Linzon, Yoav; Vitkin, Edward; Yakhini, Zohar; Chudnovsky, Alexandra; Golberg, Alexander

2016-06-01

Understanding the impact of all process parameters on the efficiency of biomass hydrolysis and on the final yield of products is critical to biorefinery design. Using Taguchi orthogonal arrays experimental design and Partial Least Square Regression, we investigated the impact of change and the comparative significance of thermochemical process temperature, treatment time, %Acid and %Solid load on carbohydrates release from green macroalgae from Ulva genus, a promising biorefinery feedstock. The average density of hydrolysate was determined using a new microelectromechanical optical resonator mass sensor. In addition, using Flux Balance Analysis techniques, we compared the potential fermentation yields of these hydrolysate products using metabolic models of Escherichia coli, Saccharomyces cerevisiae wild type, Saccharomyces cerevisiae RN1016 with xylose isomerase and Clostridium acetobutylicum. We found that %Acid plays the most significant role and treatment time the least significant role in affecting the monosaccharaides released from Ulva biomass. We also found that within the tested range of parameters, hydrolysis with 121 °C, 30 min 2% Acid, 15% Solids could lead to the highest yields of conversion: 54.134-57.500 gr ethanol kg-1 Ulva dry weight by S. cerevisiae RN1016 with xylose isomerase. Our results support optimized marine algae utilization process design and will enable smart energy harvesting by thermochemical hydrolysis.

Thermochemical hydrolysis of macroalgae Ulva for biorefinery: Taguchi robust design method.

Science.gov (United States)

Jiang, Rui; Linzon, Yoav; Vitkin, Edward; Yakhini, Zohar; Chudnovsky, Alexandra; Golberg, Alexander

2016-06-13

Understanding the impact of all process parameters on the efficiency of biomass hydrolysis and on the final yield of products is critical to biorefinery design. Using Taguchi orthogonal arrays experimental design and Partial Least Square Regression, we investigated the impact of change and the comparative significance of thermochemical process temperature, treatment time, %Acid and %Solid load on carbohydrates release from green macroalgae from Ulva genus, a promising biorefinery feedstock. The average density of hydrolysate was determined using a new microelectromechanical optical resonator mass sensor. In addition, using Flux Balance Analysis techniques, we compared the potential fermentation yields of these hydrolysate products using metabolic models of Escherichia coli, Saccharomyces cerevisiae wild type, Saccharomyces cerevisiae RN1016 with xylose isomerase and Clostridium acetobutylicum. We found that %Acid plays the most significant role and treatment time the least significant role in affecting the monosaccharaides released from Ulva biomass. We also found that within the tested range of parameters, hydrolysis with 121 °C, 30 min 2% Acid, 15% Solids could lead to the highest yields of conversion: 54.134-57.500 gr ethanol kg(-1) Ulva dry weight by S. cerevisiae RN1016 with xylose isomerase. Our results support optimized marine algae utilization process design and will enable smart energy harvesting by thermochemical hydrolysis.

Design and analysis of biorefineries based on raw glycerol: addressing the glycerol problem.

Science.gov (United States)

Posada, John A; Rincón, Luis E; Cardona, Carlos A

2012-05-01

Glycerol as a low-cost by-product of the biodiesel industry can be considered a renewable building block for biorefineries. In this work, the conversion of raw glycerol to nine added-value products obtained by chemical (syn-gas, acrolein, and 1,2-propanediol) or bio-chemical (ethanol, 1,3-propanediol, d-lactic acid, succinic acid, propionic acid, and poly-3-hydroxybutyrate) routes were considered. The technological schemes for these synthesis routes were designed, simulated, and economically assessed using Aspen Plus and Aspen Icarus Process Evaluator, respectively. The techno-economic potential of a glycerol-based biorefinery system for the production of fuels, chemicals, and plastics was analyzed using the commercial Commercial Sale Price/Production Cost ratio criteria, under different production scenarios. More income can be earned from 1,3-propanediol and 1,2-propanediol production, while less income would be obtained from hydrogen and succinic acid. This analysis may be useful mainly for biodiesel producers since several profitable alternatives are presented and discussed. Copyright © 2012 Elsevier Ltd. All rights reserved.

Design of a biomass-to-biorefinery logistics system through bio-inspired metaheuristic optimization considering multiple types of feedstocks

Science.gov (United States)

Trueba, Isidoro

fossil fuels to biofuels. In many ways biomass is a unique renewable resource. It can be stored and transported relatively easily in contrast to renewable options such as wind and solar, which create intermittent electrical power that requires immediate consumption and a connection to the grid. This thesis presents two different models for the design optimization of a biomass-to-biorefinery logistics system through bio-inspired metaheuristic optimization considering multiple types of feedstocks. This work compares the performance and solutions obtained by two types of metaheuristic approaches; genetic algorithm and ant colony optimization. Compared to rigorous mathematical optimization methods or iterative algorithms, metaheuristics do not guarantee that a global optimal solution can be found on some class of problems. Problems with similar characteristics to the one presented in this thesis have been previously solved using linear programming, integer programming and mixed integer programming methods. However, depending on the type of problem, these mathematical or complete methods might need exponential computation time in the worst-case. This often leads to computation times too high for practical purposes. Therefore, this thesis develops two types of metaheuristic approaches for the design optimization of a biomass-to-biorefinery logistics system considering multiple types of feedstocks and shows that metaheuristics are highly suitable to solve hard combinatorial optimization problems such as the one addressed in this research work.

Integrated Biorefinery for Biofuels Production

Energy Technology Data Exchange (ETDEWEB)

Miller, Gabriel [Society for Energy and Environmental Research (SEER), New York, NY (United States)

2011-09-02

This project has focused on very low grade fats, oil and greases found in municipal, commercial and industrial facilities around the country. These wastes are often disposed in landfills, wastewater treatment plants or farm fields or are blended illegally into animal feeds. Using any of these waste fatty materials that are unfit for human or animal nutrition as a clean alternative fuel makes good sense. This project defines the aforementioned wastes in terms of quality and prevalence in the US, then builds on specific promising pathways for utilizing these carbon neutral wastes. These pathways are discussed and researched at bench-scale, and in one instance, at pilot-scale. The three primary pathways are as follows: The production of Renewable Diesel Oil (RDO) as a stand-alone fuel or blended with standard distillate or residual hydrocarbons; The production of RDO as a platform for the further manufacture of Biodiesel utilizing acid esterification; The production of RDO as a platform for the manufacture of an ASTM Diesel Fuel using one or more catalysts to effect a decarboxylation of the carboxylics present in RDO This study shows that Biodiesel and ASTM Diesel produced at bench-scale (utilizing RDO made from grease trap waste as an input) could not meet industry specifications utilizing the technologies that were selected by the investigators. Details of these investigations are discussed in this report and will hopefully provide a starting point for other researchers interested in these pathways in future studies. Although results were inconclusive in finding ways to utilize RDO technology, in effect, as a pretreatment for commonly discussed technologies such as Biodiesel and ASTM Diesel, this study does shed light on the properties, performance and cost of utilizing waste greases directly as a retail liquid fuel (RDO). The utilization as a retail RDO as a boiler fuel, or for other such applications, is the most important finding of the study.

Production of a generic microbial feedstock for lignocellulose biorefineries through sequential bioprocessing.

Science.gov (United States)

Chang, Chen-Wei; Webb, Colin

2017-03-01

Lignocellulosic materials, mostly from agricultural and forestry residues, provide a potential renewable resource for sustainable biorefineries. Reducing sugars can be produced only after a pre-treatment stage, which normally involves chemicals but can be biological. In this case, two steps are usually necessary: solid-state cultivation of fungi for deconstruction, followed by enzymatic hydrolysis using cellulolytic enzymes. In this research, the utilisation of solid-state bioprocessing using the fungus Trichoderma longibrachiatum was implemented as a simultaneous microbial pretreatment and in-situ enzyme production method for fungal autolysis and further enzyme hydrolysis of fermented solids. Suspending the fermented solids in water at 50°C led to the highest hydrolysis yields of 226mg/g reducing sugar and 7.7mg/g free amino nitrogen (FAN). The resultant feedstock was shown to be suitable for the production of various products including ethanol. Copyright © 2016 Elsevier Ltd. All rights reserved.

Uncertainty analysis in raw material and utility cost of biorefinery synthesis and design

DEFF Research Database (Denmark)

Cheali, Peam; Quaglia, Alberto; Gernaey, Krist

2014-01-01

are characterized by considerable uncertainty. These uncertainties might have significant impact on the results of the design problem, and therefore need to be carefully evaluated and managed, in order to generate candidates for robust design. In this contribution, we study the effect of data uncertainty (raw...... material price and utility cost) on the design of a biorefinery process network....

Solving the multifunctionality dilemma in biorefineries with a novel hybrid mass–energy allocation method

DEFF Research Database (Denmark)

Djomo, Sylvestre Njakou; Knudsen, Marie Trydeman; Parajuli, Ranjan

2017-01-01

. The reductions in energy use and GHG emissions from using the biorefinery’s biofuels were also quantified. HMEN fairly distributed impacts among biorefinery products and did not change the order of the products in terms of the level of the pollution caused. The allocation factors for HMEN fell between mass...

Conversion of Indigenous Agricultural Waste Feedstocks to Fuel Ethanol. Cooperative Research and Development Final Report, CRADA Number CRD-13-504

Energy Technology Data Exchange (ETDEWEB)

Elander, Richard [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2016-03-27

This Cooperative Research and Development Agreement (CRADA) is between the National Renewable Energy Laboratory (NREL), a world leader in biomass conversion research and Ecopetrol American Inc., Ecopetrol S.A.'s U.S. subsidiary. The research and development efforts described in the Joint Work Statement (JWS) will take advantage of the strengths of both parties. NREL will use its Integrated Biorefinery Facility and vast experience in the conversion of lignocellulosic feedstocks to fuel ethanol to develop processes for the conversion of Ecopetrol's feedstocks. Ecopetrol will establish the infrastructure in Columbia to commercialize the conversion process.

Strategic Integration: The Practical Politics of Integrated Research in Context

Directory of Open Access Journals (Sweden)

Lorrae van Kerkhoff

2005-01-01

Full Text Available Designing an integrative research program requires that research leaders negotiate a balance between the scientific interest of research and the practical interests of non-scientific partners. This paper examines the ways integrated research is formally categorised, and analyses the tangible expressions of the practical politics involved in reconciling scientific and practical interests. Drawing on a comparative study of two Australian Cooperative Research Centres, I argue that categories used by the research leaders to describe the research programs embody three different strategies for structuring the relationships between researchers and their partners. These include matching research program categories to partners’ implementation program categories, reproducing existing integrative partnership models, and filling gaps in understanding with new technical approaches. These strategies offer different advantages and disadvantages. The cases suggest that the integrative approach favoured by each Centre depended on issues such as the geographic scope of policy arenas, sources of scientific credibility, and the political risks facing partners. The practical politics of research organisation offers a new lens for understanding both the practice and theory of integrated research.

Optimal design of microalgae-based biorefinery: Economics, opportunities and challenges

DEFF Research Database (Denmark)

Rizwan, Muhammad; Lee, Jay H.; Gani, Rafiqul

2015-01-01

Microalgae have great potential as a feedstock for the production of a wide range of end-products under the broad concept of biorefinery. In an earlier work, we proposed a superstructure based optimization model to find the optimal processing pathway for the production of biodiesel from microalgal...... biomass, and identified several challenges with the focus being on utilizing lipids extracted microalgal biomass for economic and environmentally friendly production of useful energy products. In this paper, we expand the previous optimization framework by considering the processing of microalgae residue...

Residual biomass potential in olive tree cultivation and olive oil industry in Spain: valorization proposal in a biorefinery contex

Energy Technology Data Exchange (ETDEWEB)

Manzanares, P.; Ruiz, E.; Ballesteros, M.; Negro, M.J.; Gallego, F.J.; López-Linares, J.C.; Castro, E.

2017-07-01

Olive crop and olive oil industry generates several residues, i.e., olive tree pruning biomass (OTPB), extracted olive pomace (EOP) and olive leaves (OL) that could be used to produce high-added value products in an integrated biorefinery. OTPB is generated in the field as a result of pruning operation to remove old branches; EOP is the main residue of the pomace olive oil extracting industry after extraction with hexane of residual oil contained in olive pomace; and OL comes from the olive cleaning process carried out at olive mills, where small branches and leaves are separated by density. In this work, an analysis of the potential of OTPB, EOP and OL residues was addressed by estimating the production volumes at national level and the spatial distribution of these residues using geographic information system software. Information provided by public institutions and personal surveys to the industries was evaluated. Moreover, chemical analysis of the residues was undertaken and the results used to make a first assessment of valorization into biofuels such as bioethanol and bio based chemicals. Results show that close to 4.2 million tons/year of EOP, OL and OTPB derived from olive oil industry and olive tree cultivation in Spain could be available as a raw material for biorefineries in Spain. The analysis of the chemical characteristics indicates the relevant potential of these feedstocks for the production of bioethanol and other compounds such as phenols based on suitable processing and conversion routes, although techno-economic evaluations must be tackled to refine this approach.

Residual biomass potential in olive tree cultivation and olive oil industry in Spain: valorization proposal in a biorefinery context

Directory of Open Access Journals (Sweden)

Paloma Manzanares

2017-12-01

Full Text Available Olive crop and olive oil industry generates several residues, i.e., olive tree pruning biomass (OTPB, extracted olive pomace (EOP and olive leaves (OL that could be used to produce high-added value products in an integrated biorefinery. OTPB is generated in the field as a result of pruning operation to remove old branches; EOP is the main residue of the pomace olive oil extracting industry after extraction with hexane of residual oil contained in olive pomace; and OL comes from the olive cleaning process carried out at olive mills, where small branches and leaves are separated by density. In this work, an analysis of the potential of OTPB, EOP and OL residues was addressed by estimating the production volumes at national level and the spatial distribution of these residues using geographic information system software. Information provided by public institutions and personal surveys to the industries was evaluated. Moreover, chemical analysis of the residues was undertaken and the results used to make a first assessment of valorization into biofuels such as bioethanol and bio based chemicals. Results show that close to 4.2 million tons/year of EOP, OL and OTPB derived from olive oil industry and olive tree cultivation in Spain could be available as a raw material for biorefineries in Spain. The analysis of the chemical characteristics indicates the relevant potential of these feedstocks for the production of bioethanol and other compounds such as phenols based on suitable processing and conversion routes, although techno-economic evaluations must be tackled to refine this approach.

Process Simulation and Techno-Economic Evaluation of Alternative Biorefinery Scenarios

Science.gov (United States)

Aizpurua Gonzalez, Carlos Ernesto

A biorefinery is a complex processing facility that uses sustainably produced biomass as feedstock to generate biofuels and chemical products using a wide variety of alternative conversion pathways. The alternative conversion pathways can be generally classified as either biochemical or thermochemical conversion. A biorefinery is commonly based on a core biomass conversion technology (pretreatment, hydrolysis, pyrolysis, etc.) followed by secondary processing stages that determine the specific product, and its recovery. In this study, techno-economic analysis of several different lignocellulosic biomass conversion pathways have been performed. First, a novel biochemical conversion, which used electron beam and steam explosion pretreatments for ethanol production was evaluated. This evaluation include both laboratory work and process modeling. Encouraging experimental results are obtained that showed the biomass had enhanced reactivity to the enzyme hydrolysis. The total sugar recovery for the hardwood species was 72% using 5 FPU/g enzyme dosage. The combination of electron beam and steam explosion provides an improvement in sugar conversion of more than 20% compared to steam explosion alone. This combination of pretreatments was modeled along with a novel ethanol dehydration process that is based on vapor permeation membranes. The economic feasibility of this novel pretreatment-dehydration technology was evaluated and compared with the dilute acid process proposed by NREL in 2011. Overall, the pretreatment-dehydration technology process produces the same ethanol yields (81 gal/bdton). However, the economics of this novel process does not look promising since the minimum ethanol selling price (MESP) to generate an internal rate of return of 10% is of 3.09 /gal, compared to 2.28 /gal for the base case. To enhance the economic potential of a biorefinery, the isolation of value-added co-products was incorporated into the base dilute acid biorefinery process. In this

Uncertainties in Early-Stage Capital Cost Estimation of Process Design – A Case Study on Biorefinery Design

International Nuclear Information System (INIS)

Cheali, Peam; Gernaey, Krist V.; Sin, Gürkan

2015-01-01

Capital investment, next to the product demand, sales, and production costs, is one of the key metrics commonly used for project evaluation and feasibility assessment. Estimating the investment costs of a new product/process alternative during early-stage design is a challenging task, which is especially relevant in biorefinery research where information about new technologies and experience with new technologies is limited. A systematic methodology for uncertainty analysis of cost data is proposed that employs: (a) bootstrapping as a regression method when cost data are available; and, (b) the Monte Carlo technique as an error propagation method based on expert input when cost data are not available. Four well-known models for early-stage cost estimation are reviewed and analyzed using the methodology. The significance of uncertainties of cost data for early-stage process design is highlighted using the synthesis and design of a biorefinery as a case study. The impact of uncertainties in cost estimation on the identification of optimal processing paths is indeed found to be profound. To tackle this challenge, a comprehensive techno-economic risk analysis framework is presented to enable robust decision-making under uncertainties. One of the results using order-of-magnitude estimates shows that the production of diethyl ether and 1,3-butadiene are the most promising with the lowest economic risks (among the alternatives considered) of 0.24 MM$/a and 4.6 MM$/a, respectively.

Uncertainties in Early Stage Capital Cost Estimation of Process Design – A case study on biorefinery design

Directory of Open Access Journals (Sweden)

Gurkan eSin

2015-02-01

Full Text Available Capital investment, next to the product demand, sales and production costs, is one of the key metrics commonly used for project evaluation and feasibility assessment. Estimating the investment costs of a new product/process alternative during early stage design is a challenging task. This is especially important in biorefinery research, where available information and experiences with new technologies is limited. A systematic methodology for uncertainty analysis of cost data is proposed that employs (a Bootstrapping as a regression method when cost data is available and (b the Monte Carlo technique as an error propagation method based on expert input when cost data is not available. Four well-known models for early stage cost estimation are reviewed an analyzed using the methodology. The significance of uncertainties of cost data for early stage process design is highlighted using the synthesis and design of a biorefinery as a case study. The impact of uncertainties in cost estimation on the identification of optimal processing paths is found to be profound. To tackle this challenge, a comprehensive techno-economic risk analysis framework is presented to enable robust decision making under uncertainties. One of the results using an order-of-magnitude estimate shows that the production of diethyl ether and 1,3-butadiene are the most promising with economic risks of 0.24 MM$/a and 4.6 MM$/a due to uncertainties in cost estimations, respectively.

Uncertainties in Early-Stage Capital Cost Estimation of Process Design – A Case Study on Biorefinery Design

Energy Technology Data Exchange (ETDEWEB)

Cheali, Peam; Gernaey, Krist V.; Sin, Gürkan, E-mail: gsi@kt.dtu.dk [Department of Chemical and Biochemical Engineering, Technical University of Denmark, Lyngby (Denmark)

2015-02-06

Capital investment, next to the product demand, sales, and production costs, is one of the key metrics commonly used for project evaluation and feasibility assessment. Estimating the investment costs of a new product/process alternative during early-stage design is a challenging task, which is especially relevant in biorefinery research where information about new technologies and experience with new technologies is limited. A systematic methodology for uncertainty analysis of cost data is proposed that employs: (a) bootstrapping as a regression method when cost data are available; and, (b) the Monte Carlo technique as an error propagation method based on expert input when cost data are not available. Four well-known models for early-stage cost estimation are reviewed and analyzed using the methodology. The significance of uncertainties of cost data for early-stage process design is highlighted using the synthesis and design of a biorefinery as a case study. The impact of uncertainties in cost estimation on the identification of optimal processing paths is indeed found to be profound. To tackle this challenge, a comprehensive techno-economic risk analysis framework is presented to enable robust decision-making under uncertainties. One of the results using order-of-magnitude estimates shows that the production of diethyl ether and 1,3-butadiene are the most promising with the lowest economic risks (among the alternatives considered) of 0.24 MM$/a and 4.6 MM$/a, respectively.

Chemical analysis and biorefinery of red algae Kappaphycus alvarezii for efficient production of glucose from residue of carrageenan extraction process.

Science.gov (United States)

Masarin, Fernando; Cedeno, Fernando Roberto Paz; Chavez, Eddyn Gabriel Solorzano; de Oliveira, Levi Ezequiel; Gelli, Valéria Cress; Monti, Rubens

2016-01-01

Biorefineries serve to efficiently utilize biomass and their by-products. Algal biorefineries are designed to generate bioproducts for commercial use. Due to the high carbohydrate content of algal biomass, biorefinery to generate biofuels, such as bioethanol, is of great interest. Carrageenan is a predominant polysaccharide hydrocolloid found in red macroalgae and is widely used in food, cosmetics, and pharmaceuticals. In this study, we report the biorefinery of carrageenan derived from processing of experimental strains of the red macroalgae Kappaphycus alvarezii. Specifically, the chemical composition and enzymatic hydrolysis of the residue produced from carrageenan extraction were evaluated to determine the conditions for efficient generation of carbohydrate bioproducts. The productivity and growth rates of K. alvarezii strains were assessed along with the chemical composition (total carbohydrates, ash, sulfate groups, proteins, insoluble aromatics, galacturonic acid, and lipids) of each strain. Two strains, brown and red, were selected based on their high growth rates and productivity and were treated with 6 % KOH for extraction of carrageenan. The yields of biomass from treatment with 6 % KOH solution of the brown and red strains were 89.3 and 89.5 %, respectively. The yields of carrageenan and its residue were 63.5 and 23 %, respectively, for the brown strain and 60 and 27.8 %, respectively, for the red strain. The residues from the brown and red strains were assessed to detect any potential bioproducts. The galactan, ash, protein, insoluble aromatics, and sulfate groups of the residue were reduced to comparable extents for the two strains. However, KOH treatment did not reduce the content of glucan in the residue from either strain. Glucose was produced by enzymatic hydrolysis for 72 h using both strains. The glucan conversion was 100 % for both strains, and the concentrations of glucose from the brown and red strains were 13.7 and 11.5 g L(-1

Chemical conversion of hemicellulose coproducts from forest biorefineries to polymers and chemicals

Energy Technology Data Exchange (ETDEWEB)

Boluk, Y.; Jost, R. [Alberta Research Council, Edmonton, AB (Canada)

2009-07-01

Raw material is the basis of the chemical industry. This presentation discussed the chemical conversion of hemicellulose coproducts from forest biorefineries to polymers and chemicals. Biorefining pretreatment processes open up the biomass structure, release hemicelluloses and overcome the resistance to enzymatic hydrolysis. Although hemicellulose is the second most abundant carbohydrate, it does not have many industrial applications. The state of released hemicellulose whether polymeric, oligomeric or monosaccharides depends primarily on the pretreatment process conditions. Physical pretreatment methods include high-pressure steaming and steam explosion; milling and grinding; extrusion; and high-energy radiation. The chemical pretreatment methods involve the use of alkali, acid, gas and oxidizing agents as well as solvents. The biological pretreatment methods involve the use of lignin consuming fungi and cellulose consuming fungi. A profitable use of C5 sugars in monomeric, oligomeric and polymeric forms is necessary for a viable wood to bioethanol process. Hemicellulose composition varies depending on the biomass source. It usually has a lower molecular weight than cellulose, contains branching, and is comprised of several different monosaccharides. The existing commercial chemical products include xylitol, mannitol, and furfural. The hemicellulose coproducts from a lignocellulosic biorefinery have the potential to become a feasible replacement for their fossil-based equivalents. tabs., figs.

Cooking with Active Oxygen and Solid Alkali: A Promising Alternative Approach for Lignocellulosic Biorefineries.

Science.gov (United States)

Jiang, Yetao; Zeng, Xianhai; Luque, Rafael; Tang, Xing; Sun, Yong; Lei, Tingzhou; Liu, Shijie; Lin, Lu

2017-10-23

Lignocellulosic biomass, a matrix of biopolymers including cellulose, hemicellulose, and lignin, has gathered increasing attention in recent years for the production of chemicals, fuels, and materials through biorefinery processes owing to its renewability and availability. The fractionation of lignocellulose is considered to be the fundamental step to establish an economical and sustainable lignocellulosic biorefinery. In this Minireview, we summarize a newly developed oxygen delignification for lignocellulose fractionation called cooking with active oxygen and solid alkali (CAOSA), which can fractionate lignocellulose into its constituents and maintain its processable form. In the CAOSA approach, environmentally friendly chemicals are applied instead of undesirable chemicals such as strong alkalis and sulfides. Notably, the alkali recovery for this process promises to be relatively simple and does not require causticizing or sintering. These features make the CAOSA process an alternative for both lignocellulose fractionation and biomass pretreatment. The advantages and challenges of CAOSA are also discussed to provide a comprehensive perspective with respect to existing strategies. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Microwave assisted step-by-step process for the production of fucoidan, alginate sodium, sugars and biochar from Ascophyllum nodosum through a biorefinery concept.

Science.gov (United States)

Yuan, Yuan; Macquarrie, Duncan J

2015-12-01

The biorefinery is an important concept for the development of alternative routes to a range of interesting and important materials from renewable resources. It ensures that the resources are used fully and that all parts of them are valorized. This paper develops this concept, using brown macroalgae Ascophyllum nodosum as an example, by assistance of microwave technology. A step-by-step process was designed to obtain fucoidan, alginates, sugars and biochar (alga residue) consecutively. The yields of fucoidan, alginates, sugars and biochar were 14.09%, 18.24%, 10.87% and 21.44%, respectively. To make an evaluation of the biorefinery process, seaweed sample was also treated for fucoidan extraction only, alginate extraction only and hydrothermal treatment for sugars and biochar only. The chemical composition and properties of each product were also analyzed. The results indicated that A. nodosum could be potentially used as feedstock for a biorefinery process to produce valuable chemicals and fuels. Copyright © 2015 Elsevier Ltd. All rights reserved.

Environmental life cycle assessments of producing maize, grass-clover, ryegrass and winter wheat straw for biorefinery

DEFF Research Database (Denmark)

Parajuli, Ranjan; Kristensen, Ib Sillebak; Knudsen, Marie Trydeman

2017-01-01

The aim of this study is to assess the potential environmental impacts of producing maize, grass-clover, ryegrass, and straw from winter wheat as biomass feedstocks for biorefinery. The Life Cycle Assessment (LCA) method included the following impact categories: Global Warming Potential (GWP100),...

Sustainable intensification and extensification of cropping system for biorefinery in Denmark-what does the nitrogen balance say?

DEFF Research Database (Denmark)

Manevski, Kiril; Lærke, Poul Erik; Jørgensen, Uffe

Establishing an environment-friendly industrial biorefinery production requires resource efficient agroecosystems with low losses to the environment, especially of nitrogen (N). This work reports the first field-based N losses and balances for agro-ecosystems optimised for biomass production...

Integrated Food studies education and research:

DEFF Research Database (Denmark)

Hansen, Mette Weinreich; Hansen, Stine Rosenlund

2018-01-01

The research group Foodscapes Innovation and Networks has addressed integrated food studies issues in re-search and education since 2010. Based on experiences in the group, this paper aims at discussing the chal-lenges, learning outcomes and potentials for pushing an integrated thinking into rese......The research group Foodscapes Innovation and Networks has addressed integrated food studies issues in re-search and education since 2010. Based on experiences in the group, this paper aims at discussing the chal-lenges, learning outcomes and potentials for pushing an integrated thinking...... into research and education. It also addresses the challenges in integration when the methodological approaches and theoretical frameworks chosen are ontologically and epistemologically different. A discussion of the limitations of integration is thus also part of the paper. The conceptual framework...... of ontonorms (Mol, 2013) is suggested as a common point of departure for a further development of integration. This is suggested relevant due to the fact that it forces different traditions to reflect their own value-related basis and discuss implications of this approach in a broader sense. The common values...

Microbial β-etherases and glutathione lyases for lignin valorisation in biorefineries: current state and future perspectives.

Science.gov (United States)

Husarcíková, Jana; Voß, Hauke; Domínguez de María, Pablo; Schallmey, Anett

2018-05-04

Lignin is the major aromatic biopolymer in nature, and it is considered a valuable feedstock for the future supply of aromatics. Hence, its valorisation in biorefineries is of high importance, and various chemical and enzymatic approaches for lignin depolymerisation have been reported. Among the enzymes known to act on lignin, β-etherases offer the possibility for a selective cleavage of the β-O-4 aryl ether bonds present in lignin. These enzymes, together with glutathione lyases, catalyse a reductive, glutathione-dependent ether bond cleavage displaying high stereospecificity. β-Etherases and glutathione lyases both belong to the superfamily of glutathione transferases, and several structures have been solved recently. Additionally, different approaches for their application in lignin valorisation have been reported in the last years. This review gives an overview on the current knowledge on β-etherases and glutathione lyases, their biochemical and structural features, and critically discusses their potential for application in biorefineries.

Integrated supply chain design for commodity chemicals production via woody biomass fast pyrolysis and upgrading.

Science.gov (United States)

Zhang, Yanan; Hu, Guiping; Brown, Robert C

2014-04-01

This study investigates the optimal supply chain design for commodity chemicals (BTX, etc.) production via woody biomass fast pyrolysis and hydroprocessing pathway. The locations and capacities of distributed preprocessing hubs and integrated biorefinery facilities are optimized with a mixed integer linear programming model. In this integrated supply chain system, decisions on the biomass chipping methods (roadside chipping vs. facility chipping) are also explored. The economic objective of the supply chain model is to maximize the profit for a 20-year chemicals production system. In addition to the economic objective, the model also incorporates an environmental objective of minimizing life cycle greenhouse gas emissions, analyzing the trade-off between the economic and environmental considerations. The capital cost, operating cost, and revenues for the biorefinery facilities are based on techno-economic analysis, and the proposed approach is illustrated through a case study of Minnesota, with Minneapolis-St. Paul serving as the chemicals distribution hub. Copyright © 2014 Elsevier Ltd. All rights reserved.

Amending the Structure of Renewable Carbon from Biorefinery Waste-Streams for Energy Storage Applications.

Science.gov (United States)

Ho, Hoi Chun; Goswami, Monojoy; Chen, Jihua; Keum, Jong K; Naskar, Amit K

2018-05-29

Biorefineries produce impure sugar waste streams that are being underutilized. By converting this waste to a profitable by-product, biorefineries could be safeguarded against low oil prices. We demonstrate controlled production of useful carbon materials from the waste concentrate via hydrothermal synthesis and carbonization. We devise a pathway to producing tunable, porous spherical carbon materials by modeling the gross structure formation and developing an understanding of the pore formation mechanism utilizing simple reaction principles. Compared to a simple hydrothermal synthesis from sugar concentrate, emulsion-based synthesis results in hollow spheres with abundant microporosity. In contrast, conventional hydrothermal synthesis produces solid beads with micro and mesoporosity. All the carbonaceous materials show promise in energy storage application. Using our reaction pathway, perfect hollow activated carbon spheres can be produced from waste sugar in liquid effluence of biomass steam pretreatment units. The renewable carbon product demonstrated a desirable surface area of 872 m 2 /g and capacitance of up to 109 F/g when made into an electric double layer supercapacitor. The capacitor exhibited nearly ideal capacitive behavior with 90.5% capacitance retention after 5000 cycles.

Using slaughterhouse waste in a biochemical-based biorefinery - results from pilot scale tests.

Science.gov (United States)

Schwede, Sebastian; Thorin, Eva; Lindmark, Johan; Klintenberg, Patrik; Jääskeläinen, Ari; Suhonen, Anssi; Laatikainen, Reino; Hakalehto, Elias

2017-05-01

A novel biorefinery concept was piloted using protein-rich slaughterhouse waste, chicken manure and straw as feedstocks. The basic idea was to provide a proof of concept for the production of platform chemicals and biofuels from organic waste materials at non-septic conditions. The desired biochemical routes were 2,3-butanediol and acetone-butanol fermentation. The results showed that hydrolysis resulted only in low amounts of easily degradable carbohydrates. However, amino acids released from the protein-rich slaughterhouse waste were utilized and fermented by the bacteria in the process. Product formation was directed towards acidogenic compounds rather than solventogenic products due to increasing pH-value affected by ammonia release during amino acid fermentation. Hence, the process was not effective for 2,3-butanediol production, whereas butyrate, propionate, γ-aminobutyrate and valerate were predominantly produced. This offered fast means for converting tedious protein-rich waste mixtures into utilizable chemical goods. Furthermore, the residual liquid from the bioreactor showed significantly higher biogas production potential than the corresponding substrates. The combination of the biorefinery approach to produce chemicals and biofuels with anaerobic digestion of the residues to recover energy in form of methane and nutrients that can be utilized for animal feed production could be a feasible concept for organic waste utilization.

Towards Drylands Biorefineries: Valorisation of Forage Opuntia for the Production of Edible Coatings

Directory of Open Access Journals (Sweden)

Alba Iris Nájera-García

2018-06-01

Full Text Available Species of the genus Opuntia may be a well-suited feedstock for biorefineries located in drylands, where biomass is scarcer than in humid or temperate regions. This plant has numerous uses in Mexico and Central America, and its mucilage is a specialty material with many promising applications. We extracted the mucilage from a forage species, O. heliabravoana Scheinvar, and mixed it with a thermoplastic starch to produce an edible coating. The coating was applied to blackberries, which were then evaluated in terms of several physicochemical and microbiological variables. During a 10-day evaluation period, the physicochemical variables measured in the coated fruits were not significantly different from those of the control group. However, the microbiological load of the coated fruits was significantly lower than that of the uncoated fruits, which was attributed to a decreased water activity under the edible coating. Multivariate analysis of the physicochemical and microbial variables indicated that the storage time negatively affected the weight and size of the coated and uncoated blackberries. Although some sensory attributes have yet to be optimised, our results support the use of the mucilage of forage Opuntia for the formation of edible coatings, as well as their valorisation through a biorefinery approach.

Promoting research integrity in the geosciences

Science.gov (United States)

Mayer, Tony

2015-04-01

Conducting research in a responsible manner in compliance with codes of research integrity is essential. The geosciences, as with all other areas of research endeavour, has its fair share of misconduct cases and causes celebres. As research becomes more global, more collaborative and more cross-disciplinary, the need for all concerned to work to the same high standards becomes imperative. Modern technology makes it far easier to 'cut and paste', to use Photoshop to manipulate imagery to falsify results at the same time as making research easier and more meaningful. So we need to promote the highest standards of research integrity and the responsible conduct of research. While ultimately, responsibility for misconduct rests with the individual, institutions and the academic research system have to take steps to alleviate the pressure on researchers and promote good practice through training programmes and mentoring. The role of the World Conferences on Research Integrity in promoting the importance of research integrity and statements about good practice will be presented and the need for training and mentoring programmes will be discussed

Co-production of bioethanol and probiotic yeast biomass from agricultural feedstock: application of the rural biorefinery concept.

Science.gov (United States)

Hull, Claire M; Loveridge, E Joel; Donnison, Iain S; Kelly, Diane E; Kelly, Steven L

2014-01-01

Microbial biotechnology and biotransformations promise to diversify the scope of the biorefinery approach for the production of high-value products and biofuels from industrial, rural and municipal waste feedstocks. In addition to bio-based chemicals and metabolites, microbial biomass itself constitutes an obvious but overlooked by-product of existing biofermentation systems which warrants fuller attention. The probiotic yeast Saccharomyces boulardii is used to treat gastrointestinal disorders and marketed as a human health supplement. Despite its relatedness to S. cerevisiae that is employed widely in biotechnology, food and biofuel industries, the alternative applications of S. boulardii are not well studied. Using a biorefinery approach, we compared the bioethanol and biomass yields attainable from agriculturally-sourced grass juice using probiotic S. boulardii (strain MYA-769) and a commercial S. cerevisiae brewing strain (Turbo yeast). Maximum product yields for MYA-769 (39.18 [±2.42] mg ethanol mL(-1) and 4.96 [±0.15] g dry weight L(-1)) compared closely to those of Turbo (37.43 [±1.99] mg mL(-1) and 4.78 [±0.10] g L(-1), respectively). Co-production, marketing and/or on-site utilisation of probiotic yeast biomass as a direct-fed microbial to improve livestock health represents a novel and viable prospect for rural biorefineries. Given emergent evidence to suggest that dietary yeast supplementations might also mitigate ruminant enteric methane emissions, the administration of probiotic yeast biomass could also offer an economically feasible way of reducing atmospheric CH4.

Applications of Process Synthesis: Moving from Conventional Chemical Processes towards Biorefinery Processes

DEFF Research Database (Denmark)

Yuan, Zhihong; Chen, Bingzhen; Gani, Rafiqul

2013-01-01

Concerns about diminishing petroleum reserves, enhanced worldwide demand for fuels and fluctuations in the global oil market, together with climate change and national security have promoted many initiatives for exploring alternative, non-petroleum based processes. Among these initiatives......, biorefinery processes for converting biomass-derived carbohydrates into transportation fuels and chemicals are now gaining more and more attention from both academia and industry. Process synthesis, which has played a vital role for the development, design and operation of (petro) chemical processes, can...

Anaerobic digestion of microalgal biomass: Challenges, opportunities and research needs.

Science.gov (United States)

Gonzalez-Fernandez, Cristina; Sialve, Bruno; Molinuevo-Salces, Beatriz

2015-12-01

Integration of anaerobic digestion (AD) with microalgae processes has become a key topic to support economic and environmental development of this resource. Compared with other substrates, microalgae can be produced close to the plant without the need for arable lands and be fully integrated within a biorefinery. As a limiting step, anaerobic hydrolysis appears to be one of the most challenging steps to reach a positive economic balance and to completely exploit the potential of microalgae for biogas and fertilizers production. This review covers recent investigations dealing with microalgae AD and highlights research opportunities and needs to support the development of this resource. Novel approaches to increase hydrolysis rate, the importance of the reactor design and the noteworthiness of the microbial anaerobic community are addressed. Finally, the integration of AD with microalgae processes and the potential of the carboxylate platform for chemicals and biofuels production are reviewed. Copyright © 2015 Elsevier Ltd. All rights reserved.

Hydrothermal Treatment (HTT) of Microalgae: Evaluation of the Process As Conversion Method in an Algae Biorefinery Concept

NARCIS (Netherlands)

Garcia Alba, Laura; Torri, C.; Samori, C.; van der Spek, J.J.; Fabbri, D.; Kersten, Sascha R.A.; Brilman, Derk Willem Frederik

2012-01-01

The hydrothermal treatment (HTT) technology is evaluated for its potential as a process to convert algae and algal debris into a liquid fuel, within a sustainable algae biorefinery concept in which, next to fuels (gaseous and liquid), high value products are coproduced, nutrients and water are

Biorefineries for the production of top building block chemicals and their derivatives

DEFF Research Database (Denmark)

Choi, Sol; Song, Chan Woo; Shin, Jae Ho

2015-01-01

commercialized or are close to commercialization. In this paper, we review the current status of biorefinery development for the production of these platform chemicals and their derivatives. In addition, current technological advances on industrial strain development for the production of platform chemicals...... years after its announcement, many studies have been performed for the development of efficient technologies for the bio-based production of these chemicals and derivatives. Now, ten chemicals among these top 12 chemicals, excluding the l-aspartic acid and 3-hydroxybutyrolactone, have already been...

Integration of torrefaction with steam power plant

Energy Technology Data Exchange (ETDEWEB)

Zakri, B.; Saari, J.; Sermyagina, E.; Vakkilainen, E.

2013-09-01

Torrefaction is one of the pretreatment technologies to enhance the fuel characteristics of biomass. The efficient and continuous operation of a torrefaction reactor, in the commercial scale, demands a secure biomass supply, in addition to adequate source of heat. Biorefinery plants or biomass-fuelled steam power plants have the potential to integrate with the torrefaction reactor to exchange heat and mass, using available infrastructure and energy sources. The technical feasibility of this integration is examined in this study. A new model for the torrefaction process is introduced and verified by the available experimental data. The torrefaction model is then integrated in different steam power plants to simulate possible mass and energy exchange between the reactor and the plants. The performance of the integrated plant is investigated for different configurations and the results are compared. (orig.)

The importance of utility systems in today's biorefineries and a vision for tomorrow.

Science.gov (United States)

Eggeman, Tim; Verser, Dan

2006-01-01

Heat and power systems commonly found in today's corn processing facilities, sugar mills, and pulp and paper mills will be reviewed. We will also examine concepts for biorefineries of the future. We will show that energy ratio, defined as the ratio of renewable energy produced divided by the fossil energy input, can vary widely from near unity to values greater than 12. Renewable-based utility systems combined with low-fossil input agricultural systems lead to high-energy ratios.

A GENERIC TACTICAL PLANNING MODEL TO SUPPLY A BIOREFINERY WITH BIOMASS

Directory of Open Access Journals (Sweden)

Birome Holo Ba

Full Text Available ABSTRACT The supply chains which bring biomass to biorefineries play a critical role in biofuel production. Optimization models can help decision makers to design more efficient chains and minimize the cost of biomass delivered to the refineries. This article based on a French national research project on biomass logistics considers one refinery, able to process several crops and several parts of the same crop, over a one-year horizon divided into days or weeks. A network model and a data model are first developed to let the decision maker describe the supply chain structure and its data, without affecting the underlying mathematical model. The latter is a mixed integer linear program which combines for the first time various features, either original or tackled separately in the literature. Knowing the refinery demands, it determines the activity levels in the network (amounts harvested, baled, transported, stored, etc. and the required equipment, in order to minimize a total cost including harvesting costs, transport costs and storage costs. Numerical evaluations based on real data show that the proposed model can optimize large supply chains in reasonable running times.

Introduction to Session 5

Science.gov (United States)

Zullo, Luca; Snyder, Seth W.

Production of bio-based products that are cost competitive in the market place requires well-developed operations that include innovative processes and separation solutions. Separations costs can make the difference between an interesting laboratory project and a successful commercial process. Bioprocessing and separations research and development addresses some of the most significant cost barriers in production of bioffuels and bio-based chemicals. Models of integrated biorefineries indicate that success will require production of higher volume fuels in conjunction with high margin chemical products. Addressing the bioprocessing and separations cost barriers will be critical to the overall success of the integrated biorefinery.

Regional differences in the economic feasibility of advanced biorefineries: Fast pyrolysis and hydroprocessing

International Nuclear Information System (INIS)

Brown, Tristan R.; Thilakaratne, Rajeeva; Brown, Robert C.; Hu, Guiping

2013-01-01

This analysis identifies the sensitivity of the fast pyrolysis and hydroprocessing pathway to facility location. The economic feasibility of a 2000 metric ton per day fast pyrolysis and hydroprocessing biorefinery is quantified based on 30 different state-specific facility locations within the United States. We calculate the 20-year internal rate of return (IRR) and net present value (NPV) for each location scenario as a function of state- and region-specific factors. This analysis demonstrates that biorefinery IRR and NPV are very sensitive to bio-oil yield, feedstock cost, location capital cost factor, and transportation fuel market value. The IRRs and NPVs generated for each scenario vary widely as a result, ranging from a low of 7.4% and −$79.5 million in Illinois to a high of 17.2% and $165.5 million in Georgia. The results indicate that the economic feasibility of the fast pyrolysis and hydroprocessing pathway is strongly influenced by facility location within the United States. This result could have important implications for cellulosic biofuel commercialization under the revised Renewable Fuel Standard. - Highlights: ► We model the production of biofuel via fast pyrolysis and hydroprocessing of biomass. ► We compile regional- and state-specific factors for 30 different US state scenarios. ► We quantify facility economic feasibility under each state scenario. ► Facility economic feasibility is strongly influenced by facility location

Catalytic Hydrothermal Gasification of Lignin-Rich Biorefinery Residues and Algae Final Report

Energy Technology Data Exchange (ETDEWEB)

Elliott, Douglas C.; Neuenschwander, Gary G.; Hart, Todd R.; Rotness, Leslie J.; Zacher, Alan H.; Santosa, Daniel M.; Valkenburt, Corinne; Jones, Susanne B.; Tjokro Rahardjo, Sandra A.

2009-11-03

This report describes the results of the work performed by PNNL using feedstock materials provided by the National Renewable Energy Laboratory, KL Energy and Lignol lignocellulosic ethanol pilot plants. Test results with algae feedstocks provided by Genifuel, which provided in-kind cost share to the project, are also included. The work conducted during this project involved developing and demonstrating on the bench-scale process technology at PNNL for catalytic hydrothermal gasification of lignin-rich biorefinery residues and algae. A technoeconomic assessment evaluated the use of the technology for energy recovery in a lignocellulosic ethanol plant.

Working with Research Integrity-Guidance for Research Performing Organisations: The Bonn PRINTEGER Statement.

Science.gov (United States)

Forsberg, Ellen-Marie; Anthun, Frank O; Bailey, Sharon; Birchley, Giles; Bout, Henriette; Casonato, Carlo; Fuster, Gloria González; Heinrichs, Bert; Horbach, Serge; Jacobsen, Ingrid Skjæggestad; Janssen, Jacques; Kaiser, Matthias; Lerouge, Inge; van der Meulen, Barend; de Rijcke, Sarah; Saretzki, Thomas; Sutrop, Margit; Tazewell, Marta; Varantola, Krista; Vie, Knut Jørgen; Zwart, Hub; Zöller, Mira

2018-05-31

This document presents the Bonn PRINTEGER Consensus Statement: Working with Research Integrity-Guidance for research performing organisations. The aim of the statement is to complement existing instruments by focusing specifically on institutional responsibilities for strengthening integrity. It takes into account the daily challenges and organisational contexts of most researchers. The statement intends to make research integrity challenges recognisable from the work-floor perspective, providing concrete advice on organisational measures to strengthen integrity. The statement, which was concluded February 7th 2018, provides guidance on the following key issues: § 1. Providing information about research integrity § 2. Providing education, training and mentoring § 3. Strengthening a research integrity culture § 4. Facilitating open dialogue § 5. Wise incentive management § 6. Implementing quality assurance procedures § 7. Improving the work environment and work satisfaction § 8. Increasing transparency of misconduct cases § 9. Opening up research § 10. Implementing safe and effective whistle-blowing channels § 11. Protecting the alleged perpetrators § 12. Establishing a research integrity committee and appointing an ombudsperson § 13. Making explicit the applicable standards for research integrity.

The brave new researcher of doctoral integrity training

DEFF Research Database (Denmark)

Sarauw, Laura Louise; Degn, Lise; Ørberg, Jakob Williams

2018-01-01

Research integrity has become a major concern for both higher education institutions and research policy makers in the recent decades, and since 2000 there has been an explosive boom of national and international codes and agreements on ‘responsible conduct of research’ and ’research integrity...... are constructed and negotiated within the courses. The field of research integrity teaching is still emergent and course leaders and teachers are often key actors in framing and promoting certain understandings of research integrity in their discipline. Hence, the four research integrity courses explored...... the following questions: 1) What attitudes, behaviors, and notions of the ‘ideal researcher’ aree constructed and promoted in the local research integrity training for PhD fellows? 2) How do these ideals relate to other concerns and pressures among the course leaders, teachers and PhD fellows? 3) Are other...

From gene to biorefinery: microbial β-etherases as promising biocatalysts for lignin valorization

Directory of Open Access Journals (Sweden)

Pere ePicart

2015-09-01

Full Text Available The set-up of biorefineries for the valorization of lignocellulosic biomass will be core in the future to reach sustainability targets. In this area, biomass-degrading enzymes are attracting significant research interest for their potential in the production of chemicals and biofuels from renewable feedstock. Gluthatione-dependent β-etherases are emerging enzymes for the biocatalytic depolymerization of lignin, a heterogeneous aromatic polymer abundant in Nature. They selectively catalyze the reductive cleavage of β-O-4 aryl-ether bonds which account for 45-60% of linkages present in lignin. Hence, application of β-etherases in lignin depolymerization would enable a specific lignin breakdown, selectively yielding (valuable low-molecular-mass aromatics. Albeit β-etherases have been biochemically known for decades, only very recently novel β-etherases have been identified and thoroughly characterized for lignin valorization, expanding the enzyme toolbox for efficient β-O-4 aryl-ether bond cleavage. Given their emerging importance and potential, this mini-review discusses recent developments in the field of β-etherase biocatalysis covering all aspects from enzyme identification to biocatalytic applications with real lignin samples.

From gene to biorefinery: microbial β-etherases as promising biocatalysts for lignin valorization.

Science.gov (United States)

Picart, Pere; de María, Pablo Domínguez; Schallmey, Anett

2015-01-01

The set-up of biorefineries for the valorization of lignocellulosic biomass will be core in the future to reach sustainability targets. In this area, biomass-degrading enzymes are attracting significant research interest for their potential in the production of chemicals and biofuels from renewable feedstock. Glutathione-dependent β-etherases are emerging enzymes for the biocatalytic depolymerization of lignin, a heterogeneous aromatic polymer abundant in nature. They selectively catalyze the reductive cleavage of β-O-4 aryl-ether bonds which account for 45-60% of linkages present in lignin. Hence, application of β-etherases in lignin depolymerization would enable a specific lignin breakdown, selectively yielding (valuable) low-molecular-mass aromatics. Albeit β-etherases have been biochemically known for decades, only very recently novel β-etherases have been identified and thoroughly characterized for lignin valorization, expanding the enzyme toolbox for efficient β-O-4 aryl-ether bond cleavage. Given their emerging importance and potential, this mini-review discusses recent developments in the field of β-etherase biocatalysis covering all aspects from enzyme identification to biocatalytic applications with real lignin samples.

Process integration study of a kraft pulp mill converted to an ethanol production plant – Part A: Potential for heat integration of thermal separation units

International Nuclear Information System (INIS)

Fornell, Rickard; Berntsson, Thore

2012-01-01

Energy efficiency is an important parameter for the profitability of biochemical ethanol production from lignocellulosic raw material. The yield of ethanol is generally low due to the limited amount of fermentable compounds in the raw material. Increasing energy efficiency leads to possibilities of exporting more by-products, which in turn might reduce the net production cost of ethanol. Energy efficiency is also an important issue when discussing the repurposing of kraft pulp mills to biorefineries, since the mills in question most likely will be old and inefficient. Investing in energy efficiency measures might therefore have a large effect on the economic performance. This paper discusses energy efficiency issues related to the repurposing of a kraft pulp mill into a lignocellulosic ethanol production plant. The studied process is a typical Scandinavian kraft pulp mill that has been converted to a biorefinery with ethanol as main product. A process integration study, using pinch analysis and process simulations, has been performed in order to assess alternative measures for improving the energy efficiency. The improvements found have also been related to the possibilities for by-product sales from the plant (electricity and/or lignin). In a forthcoming paper, which is the second part of this process integration study, an economic analysis based on the results from this paper will be presented. - Highlights: ► Conversion of a kraft pulp mill to ethanol production. ► Heat integration of distillation/evaporation in a lignocellulosic ethanol plant. ► Advanced pinch curves used to find new integration possibilities. ► 35–40% reduction of steam demand.

Integrated automation for continuous high-throughput synthetic chromosome assembly and transformation to identify improved yeast strains for industrial production of peptide sweetener brazzein

Science.gov (United States)

Production and recycling of recombinant sweetener peptides in industrial biorefineries involves the evaluation of large numbers of genes and proteins. High-throughput integrated robotic molecular biology platforms that have the capacity to rapidly synthesize, clone, and express heterologous gene ope...

Utilization of sweet sorghum juice for the production of astaxanthin as a biorefinery co-product by phaffia rhodozyma

Science.gov (United States)

Co-product generation in a biorefinery process is crucial to allow ethanol production from agricultural feedstocks to be economically viable. One feedstock that has underutilized potential in the U.S. is sweet sorghum. The stalks of sweet sorghum can be crushed to produce a juice rich in soluble sug...

The epistemic integrity of scientific research.

Science.gov (United States)

De Winter, Jan; Kosolosky, Laszlo

2013-09-01

We live in a world in which scientific expertise and its epistemic authority become more important. On the other hand, the financial interests in research, which could potentially corrupt science, are increasing. Due to these two tendencies, a concern for the integrity of scientific research becomes increasingly vital. This concern is, however, hollow if we do not have a clear account of research integrity. Therefore, it is important that we explicate this concept. Following Rudolf Carnap's characterization of the task of explication, this means that we should develop a concept that is (1) similar to our common sense notion of research integrity, (2) exact, (3) fruitful, and (4) as simple as possible. Since existing concepts do not meet these four requirements, we develop a new concept in this article. We describe a concept of epistemic integrity that is based on the property of deceptiveness, and argue that this concept does meet Carnap's four requirements of explication. To illustrate and support our claims we use several examples from scientific practice, mainly from biomedical research.

Research integrity and misconduct: a clarification of the concepts.

Science.gov (United States)

Khanyile, T D; Duma, S; Fakude, L P; Mbombo, N; Daniels, F; Sabone, M S

2006-03-01

The commercialization of research and the ever changing scientific environment has led scholars to shift the focus from promoting research integrity to regulating misconduct. As a result, most literature explains research integrity in terms of avoidance of misconduct. The purpose of the paper is to stimulate reflection and discussion on research integrity and research misconduct. This article explores the meaning of research integrity and research misconduct, and how research integrity can be promoted to ensure safer research and scholarship. We believe that the discussion can help clarify some hazy areas in the research and publication processes, and appreciate some crucial aspects that they may have seen taken for granted. The purpose of this article is to share with the readers some clarification or analysis of the two concepts namely: research integrity and misconduct. The objectives are: (1) To explore and analyse the concepts of research integrity and research misconduct from the educational or developmental perspective and not the legal perspective as others in literature have done. (2) To stimulate the reflection and discussion on strategies to promote research integrity and thus prevent research misconduct Literature review and concept analysis was undertaken to clarify the two concepts. We argue that the two concepts can be viewed along a continuum, i.e. where research integrity ends, research misconduct starts. We also argue that it is the responsibility of the research community at large to always ensure that the scientific ethics balance is maintained throughout the research process to ensure research integrity and avoid research misconduct. We also argue that research integrity is interlinked with morality while misconduct is interlinked with immorality.

Nordic Migration and Integration Research

OpenAIRE

Pyrhönen, Niko; Martikainen, Tuomas; Leinonen, Johanna

2017-01-01

EXECUTIVE SUMMARY Migration and integration are currently highly contentious topics in political, public and scientific arenas, and will remain so in the near future. However, many common migration-related prejudices and inefficien¬cies in the integration of the migrant population are due to the lack of sound, tested and accessible scientific research. Therefore, the study of migration – by developing basic research and by properly resourcing novel methodological approaches and interventions ...

Biorefinery of instant noodle waste to biofuels.

Science.gov (United States)

Yang, Xiaoguang; Lee, Sang Jun; Yoo, Hah Young; Choi, Han Suk; Park, Chulhwan; Kim, Seung Wook

2014-05-01

Instant noodle waste, one of the main residues of the modern food industry, was employed as feedstock to convert to valuable biofuels. After isolation of used oil from the instant noodle waste surface, the starch residue was converted to bioethanol by Saccharomyces cerevisiae K35 with simultaneous saccharification and fermentation (SSF). The maximum ethanol concentration and productivity was 61.1g/l and 1.7 g/lh, respectively. After the optimization of fermentation, ethanol conversion rate of 96.8% was achieved within 36 h. The extracted oil was utilized as feedstock for high quality biodiesel conversion with typical chemical catalysts (KOH and H2SO4). The optimum conversion conditions for these two catalysts were estimated; and the highest biodiesel conversion rates were achieved 98.5% and 97.8%, within 2 and 3h, respectively. The high conversion rates of both bioethanol and biodiesel demonstrate that novel substrate instant noodle waste can be an attractive biorefinery feedstock in the biofuels industry. Copyright © 2014 Elsevier Ltd. All rights reserved.

Laminaria digitata as a potential carbon source for succinic acid and bioenergy production in a biorefinery perspective

DEFF Research Database (Denmark)

Alvarado-Morales, Merlin; Gunnarsson, Ingólfur Bragi; Fotidis, Ioannis

2015-01-01

to 298 and 285 NmL CH4 g− 1 VSadded, respectively. PHSR could potentially be used for: dietary food additive, fish feed, bioenergy production and added value products. This study opens possibility to conceive different biorefinery scenarios in which the efficient use of the macroalgal biomass fractions...... can provide numerous added-value bio-based products and energy....

On a novel strategy for water recovery and recirculation in biorefineries through application of forward osmosis membranes

DEFF Research Database (Denmark)

Kalafatakis, Stavros; Braekevelt, Sylvie; Carlsen, Vilhelmsen

2017-01-01

A great amount of research has been performed during the last 10 years focusing on forward osmosis (FO)processes. The main driving force is to find an effective and low energy demanding methodology for water recovery as well as up-concentration of valuable products. Nevertheless, the energetic...... and financial benefits of this technology can be undermined from the fact that FO should be usually coupled with reverse osmosis (RO) for subsequent water purification and draw solution regeneration. Hence, a different approach was applied in order to omit the RO step. Crude glycerol and enzymatically...... pretreated wheat straw, which are common 2nd generation biorefinery feedstocks, have been evaluated as possible draw solution. In this way, water can be directly recovered and transferred back into the fermentation loop without further purification. Applying the Aquaporin InsideTM Forward Osmosis system...

Valorization of lignin and cellulose in acid-steam-exploded corn stover by a moderate alkaline ethanol post-treatment based on an integrated biorefinery concept.

Science.gov (United States)

Yang, Sheng; Zhang, Yue; Yue, Wen; Wang, Wei; Wang, Yun-Yan; Yuan, Tong-Qi; Sun, Run-Cang

2016-01-01

Due to the unsustainable consumption of fossil resources, great efforts have been made to convert lignocellulose into bioethanol and commodity organic compounds through biological methods. The conversion of cellulose is impeded by the compactness of plant cell wall matrix and crystalline structure of the native cellulose. Therefore, appropriate pretreatment and even post-treatment are indispensable to overcome this problem. Additionally, an adequate utilization of coproduct lignin will be important for improving the economic viability of modern biorefinery industries. The effectiveness of moderate alkaline ethanol post-treatment on the bioconversion efficiency of cellulose in the acid-steam-exploded corn stover was investigated in this study. Results showed that an increase of the alcoholic sodium hydroxide (NaOH) concentration from 0.05 to 4% led to a decrease in the lignin content in the post-treated samples from 32.8 to 10.7%, while the cellulose digestibility consequently increased. The cellulose conversion of the 4% alcoholic NaOH integrally treated corn stover reached up to 99.3% after 72 h, which was significantly higher than that of the acid steam exploded corn stover without post-treatment (57.3%). In addition to the decrease in lignin content, an expansion of cellulose I lattice induced by the 4% alcoholic NaOH post-treatment played a significant role in promoting the enzymatic hydrolysis of corn stover. More importantly, the lignin fraction (AL) released during the 4% alcoholic NaOH post-treatment and the lignin-rich residue (EHR) remained after the enzymatic hydrolysis of the 4% alcoholic NaOH post-treated acid-steam-exploded corn stover were employed to synthesize lignin-phenol-formaldehyde (LPF) resins. The plywoods prepared with the resins exhibit satisfactory performances. An alkaline ethanol system with an appropriate NaOH concentration could improve the removal of lignin and modification of the crystalline structure of cellulose in acid

Enzymatic hydrolyses of pretreated eucalyptus residues, wheat straw or olive tree pruning, and their mixtures towards flexible sugar-based biorefineries

DEFF Research Database (Denmark)

Silva-Fernandes, Talita; Marques, Susana; Rodrigues, Rita C. L. B.

2016-01-01

Eucalyptus residues, wheat straw, and olive tree pruning are lignocellulosic materials largely available in Southern Europe and have high potential to be used solely or in mixtures in sugar-based biorefineries for the production of biofuels and other bio-based products. Enzymatic hydrolysis...

A Translational Model of Research-Practice Integration

Science.gov (United States)

Vivian, Dina; Hershenberg, Rachel; Teachman, Bethany A.; Drabick, Deborah A. G.; Goldfried, Marvin R.; Wolfe, Barry

2013-01-01

We propose a four-level, recursive Research-Practice Integration framework as a heuristic to (a) integrate and reflect on the articles in this Special Section as contributing to a bidirectional bridge between research and practice, and (b) consider additional opportunities to address the research–practice gap. Level 1 addresses Treatment Validation studies and includes an article by Lochman and colleagues concerning the programmatic adaptation, implementation, and dissemination of the empirically supported Coping Power treatment program for youth aggression. Level 2 translation, Training in Evidence-Based Practice, includes a paper by Hershenberg, Drabick, and Vivian, which focuses on the critical role that predoctoral training plays in bridging the research–practice gap. Level 3 addresses the Assessment of Clinical Utility and Feedback to Research aspects of translation. The articles by Lambert and Youn, Kraus, and Castonguay illustrate the use of commercial outcome packages that enable psychotherapists to integrate ongoing client assessment, thus enhancing the effectiveness of treatment implementation and providing data that can be fed back to researchers. Lastly, Level 4 translation, the Cross-Level Integrative Research and Communication, concerns research efforts that integrate data from clinical practice and all other levels of translation, as well as communication efforts among all stakeholders, such as researchers, psychotherapists, and clients. Using a two-chair technique as a framework for his discussion, Wolfe's article depicts the struggle inherent in research–practice integration efforts and proposes a rapprochement that highlights advancements in the field. PMID:22642522

IMPROVED BIOREFINERY FOR THE PRODUCTION OF ETHANOL, CHEMICALS, ANIMAL FEED AND BIOMATERIALS FROM SUGAR CANE

Energy Technology Data Exchange (ETDEWEB)

Dr. Donal F. Day

2009-01-29

The Audubon Sugar Institute (ASI) of Louisiana State University’s Agricultural Center (LSU AgCenter) and MBI International (MBI) sought to develop technologies that will lead to the development of a sugar-cane biorefinery, capable of supplying fuel ethanol from bagasse. Technology development focused on the conversion of bagasse, cane-leaf matter (CLM) and molasses into high value-added products that included ethanol, specialty chemicals, biomaterials and animal feed; i.e. a sugar cane-based biorefinery. The key to lignocellulosic biomass utilization is an economically feasible method (pretreatment) for separating the cellulose and the hemicellulose from the physical protection provided by lignin. An effective pretreatment disrupts physical barriers, cellulose crystallinity, and the association of lignin and hemicellulose with cellulose so that hydrolytic enzymes can access the biomass macrostructure (Teymouri et al. 2004, Laureano-Perez, 2005). We chose to focus on alkaline pretreatment methods for, and in particular, the Ammonia Fiber Expansion (AFEX) process owned by MBI. During the first two years of this program a laboratory process was established for the pretreatment of bagasse and CLM using the AFEX process. There was significant improvement of both rate and yield of glucose and xylose upon enzymatic hydrolysis of AFEX-treated bagasse and CLM compared with untreated material. Because of reactor size limitation, several other alkaline pretreatment methods were also co-investigated. They included, dilute ammonia, lime and hydroxy-hypochlorite treatments. Scale-up focused on using a dilute ammonia process as a substitute for AFEX, allowing development at a larger scale. The pretreatment of bagasse by an ammonia process, followed by saccharification and fermentation produced ethanol from bagasse. Simultaneous saccharification and fermentation (SSF) allowed two operations in the same vessel. The addition of sugarcane molasses to the hydrolysate

European Universities' Guidance on Research Integrity and Misconduct.

Science.gov (United States)

Aubert Bonn, Noémie; Godecharle, Simon; Dierickx, Kris

2017-02-01

Research integrity is imperative to good science. Nonetheless, many countries and institutions develop their own integrity guidance, thereby risking incompatibilities with guidance of collaborating institutions. We retrieved guidance for academic integrity and misconduct of 18 universities from 10 European countries and investigated accessibility, general content, principles endorsed, and definitions of misconduct. Accessibility and content differ substantially between institutions. There are general trends of common principles of integrity and definitions of misconduct, yet differences remain. Parallel with previous research, we distinguish different approaches in integrity guidance; one emphasizes broad values of integrity, and the other details negative behaviors of misconduct. We propose that a balance between both approaches is necessary to preserve trust, meaning, and realism of guidance on research integrity.

Where to implement local biotech innovations? A framework for multi-scale socio-economic and environmental impact assessment of Green Bio-Refineries

DEFF Research Database (Denmark)

Cong, Ronggang; Stefaniak, Irena; Madsen, Bjarne

2017-01-01

Green Bio-Refineries (GBRs) have economic and environmental potentials through changing land use from cereals to grass production and provision of grass-based protein feed for livestock production and other valuable byproducts. However, the potentials are dependent on local conditions of the GBRs...

Hydrothermal Liquefaction of Agricultural and Biorefinery Residues Final Report – CRADA #PNNL/277

Energy Technology Data Exchange (ETDEWEB)

Elliott, Douglas C.; Neuenschwander, Gary G.; Hart, Todd R.; Rotness, Leslie J.; Zacher, Alan H.; Fjare, K. A.; Dunn, B. C.; McDonald, S. L.; Dassor, G.

2010-07-28

This project was performed as a Cooperative Research and Development Agreement (CRADA) with the participants: Archer-Daniels-Midland Company (ADM), ConocoPhillips (COP), and Pacific Northwest National Laboratory (PNNL). Funding from the federal government was provided by the Office of the Biomass Program within the Energy Efficiency and Renewable Energy assistant secretariat as part of the Thermochemical Conversion Platform. The three-year project was initiated in August 2007 with formal signing of the CRADA (#PNNL/277) in March 3, 2008 with subsequent amendments approved in November of 2008 and August of 2009. This report describes the results of the work performed by PNNL and the CRADA partners ADM and COP. It is considered Protected CRADA Information and is not available for public disclosure. The work conducted during this project involved developing process technology at PNNL for hydrothermal liquefaction (HTL) of agricultural and biorefinery residues and catalytic hydrothermal gasification (CHG) of the aqueous byproduct from the liquefaction step. Related work performed by the partners included assessment of aqueous phase byproducts, hydroprocessing of the bio-oil product and process analysis and economic modeling of the technology.

Environmental benefits of the integrated production of ethanol and biodiesel

International Nuclear Information System (INIS)

Souza, Simone Pereira; Seabra, Joaquim E.A.

2013-01-01

Highlights: ► Integrated bioenergy systems can favor the sustainability of biofuels. ► We analyzed the integrated production of ethanol and biodiesel in Brazil. ► GHG emissions and fossil energy use in the ethanol life cycle would be reduced. ► Socio-economic and other environmental aspects must be analyzed in future works. -- Abstract: The biorefinery of the future will be an integrated complex that makes a variety of products (e.g., biofuels, chemicals, power and protein) from a variety of feedstocks. The objective of this work was to evaluate the environmental benefits, compared to the traditional sugarcane ethanol system, of the integrated production of ethanol and biodiesel through a sugarcane–soybean biorefinery concept in Brazil. The environmental aspects considered here were the fossil energy use and the greenhouse gases (GHGs) emissions associated with ethanol production. In the Integrated System, soybean would be cultivated in part of the sugarcane reforming areas, which represents ∼17% of the total sugarcane area. Sugarcane and soybean oil would be processed in a combined ethanol–biodiesel plant, which would use only bagasse as fuel. All the demand for utilities of the biodiesel plant would be provided by the distillery. The output products of the combined plant would comprise sugarcane ethanol, soybean biodiesel (which would be used as diesel (B5) substitute in the sugarcane cultivation), bioelectricity and glycerin. The results indicate that the Integrated System can reduce the fossil energy consumption from 75 to 37 kJ/MJ of ethanol, when compared to the traditional system. For GHG emissions, the value would drop from 22.5 to 19.7 g CO 2 eq/MJ of ethanol. This analysis shows that the Integrated System is an important option to contribute to ethanol’s life cycle independence from fossil resources. This is an attractive environmental aspect, but socio-economic (as well as other environmental) aspects should also be analyzed in order to

The European structural integrity research programme

International Nuclear Information System (INIS)

Townley, C.H.A.; Acker, D.; Laue, H.

1990-01-01

A thermal hydraulics evaluation of the European Fast Reactor (EFR) design followed by structural analysis is presented in this article to assess the structural integrity research programme to date. Improved design methods are being achieved as a result of the structural integrity programme for the EFR. Excellent collaboration between the nationally based research organizations and the design and construction companies has been important in achieving these improvements. (UK)

Mediator infrastructure for information integration and semantic data integration environment for biomedical research.

Science.gov (United States)

Grethe, Jeffrey S; Ross, Edward; Little, David; Sanders, Brian; Gupta, Amarnath; Astakhov, Vadim

2009-01-01

This paper presents current progress in the development of semantic data integration environment which is a part of the Biomedical Informatics Research Network (BIRN; http://www.nbirn.net) project. BIRN is sponsored by the National Center for Research Resources (NCRR), a component of the National Institutes of Health (NIH). A goal is the development of a cyberinfrastructure for biomedical research that supports advance data acquisition, data storage, data management, data integration, data mining, data visualization, and other computing and information processing services over the Internet. Each participating institution maintains storage of their experimental or computationally derived data. Mediator-based data integration system performs semantic integration over the databases to enable researchers to perform analyses based on larger and broader datasets than would be available from any single institution's data. This paper describes recent revision of the system architecture, implementation, and capabilities of the semantically based data integration environment for BIRN.

Towards the Shell Biorefinery: Sustainable Synthesis of the Anticancer Alkaloid Proximicin A from Chitin.

Science.gov (United States)

Sadiq, Alejandro D; Chen, Xi; Yan, Ning; Sperry, Jonathan

2018-02-09

A shell biorefinery would involve fractionation of crustacean shells and incorporation of the components into value-added products, particularly those that contain nitrogen. In a proof-of-concept study that validates this concept, the anticancer alkaloid proximicin A has been synthesized from the chitin-derived platform chemical 3-acetamido-5-acetylfuran (3A5AF). This study accentuates the leading role chitin is likely to play in the sustainable production of nitrogen-containing fine chemicals that are not directly attainable from lignocellulose. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Integrated Biorefineries: Reducing Investment Risk in Novel Technologies

Energy Technology Data Exchange (ETDEWEB)

None

2016-08-18

Achieving national energy and climate goals will require a large, economically viable, and environmentally sustainable U.S. bioeconomy. The U.S. goal to build a diverse, robust, and resilient energy sector creates an urgent need to bridge the gap between promising research and pioneering large scale production of advanced biofuels.

Factors affecting public support for forest-based biorefineries: A comparison of mill towns and the general public in Maine, USA

International Nuclear Information System (INIS)

Marciano, James A.; Lilieholm, Robert J.; Teisl, Mario F.; Leahy, Jessica E.; Neupane, Binod

2014-01-01

Community views toward the risks and benefits of emerging renewable energy technologies are important factors in facility siting decisions and their eventual success. While the actual socioeconomic and biophysical impacts of proposed industrial developments are fraught with uncertainty, understanding public perceptions is critical in managing costs and benefits to local citizens. Here, we explore the social acceptability of forest-based biorefineries in Maine using random utility modeling to identify how project attributes and citizen characteristics interact to affect level of support. Using a statewide sample (Statewide) and a subsample of mill towns (Mill Towns), we found that: (1) in both samples, individual characteristics had similar coefficients and significance levels except for pro-environment attitudes; (2) the coefficients related to the industry’s negative attributes were notably different between the two samples, while positive attributes were not; (3) in both samples, positive industry attributes such as “producing products from a sustainable resource” and “increased economic development” were the most influential variables in determining the level of support for a new biorefinery in an individual’s community; and (4) in general, Mill Town respondents were more accepting of potential negative attributes such as increased levels of truck traffic, odor, noise, and air and water pollution. - Highlights: • We examined social views of bioproducts processing in mill towns and statewide. • Environmental sustainability was a major concern expressed by both samples. • Views were affected by proximity to processing, and by respondent characteristics. • Public concerns should be considered along the entire supply chain. • Views toward biorefineries may be influenced by views of related industries

Techno-economic analysis for incorporating a liquid-liquid extraction system to remove acetic acid into a proposed commercial scale biorefinery.

Science.gov (United States)

Aghazadeh, Mahdieh; Engelberth, Abigail S

2016-07-08

Mitigating the effect of fermentation inhibitors in bioethanol plants can have a great positive impact on the economy of this industry. Liquid-liquid extraction (LLE) using ethyl acetate is able to remove fermentation inhibitors-chiefly, acetic acid-from an aqueous solution used to produce bioethanol. The fermentation broth resulting from LLE has higher performance for ethanol yield and its production rate. Previous techno-economic analyses focused on second-generation biofuel production did not address the impact of removing the fermentation inhibitors on the economic performance of the biorefinery. A comprehensive analysis of applying a separation system to mitigate the fermentation inhibition effect and to provide an analysis on the economic impact of removal of acetic acid from corn stover hydrolysate on the overall revenue of the biorefinery is necessary. This study examines the pros and cons associated with implementing LLE column along with the solvent recovery system into a commercial scale bioethanol plant. Using details from the NREL-developed model of corn stover biorefinery, the capital costs associated with the equipment and the operating cost for the use of solvent were estimated and the results were compared with the profit gain due to higher ethanol production. Results indicate that the additional capital will add 1% to the total capital and manufacturing cost will increase by 5.9%. The benefit arises from the higher ethanol production rate and yield as a consequence of inhibitor extraction and results in a $0.35 per gallon reduction in the minimum ethanol selling price (MESP). © 2016 American Institute of Chemical Engineers Biotechnol. Prog., 32:971-977, 2016. © 2016 American Institute of Chemical Engineers.

Investigation of thermochemical biorefinery sizing and environmental sustainability impacts for conventional supply system and distributed preprocessing supply system designs

Energy Technology Data Exchange (ETDEWEB)

Muth, jr., David J. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Langholtz, Matthew H. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Tan, Eric [National Renewable Energy Lab. (NREL), Golden, CO (United States); Jacobson, Jacob [Idaho National Lab. (INL), Idaho Falls, ID (United States); Schwab, Amy [National Renewable Energy Lab. (NREL), Golden, CO (United States); Wu, May [Argonne National Lab. (ANL), Argonne, IL (United States); Argo, Andrew [Sundrop Fuels, Golden, CO (United States); Brandt, Craig C. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Cafferty, Kara [Idaho National Lab. (INL), Idaho Falls, ID (United States); Chiu, Yi-Wen [Argonne National Lab. (ANL), Argonne, IL (United States); Dutta, Abhijit [National Renewable Energy Lab. (NREL), Golden, CO (United States); Eaton, Laurence M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Searcy, Erin [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2014-03-31

The 2011 US Billion-Ton Update estimates that by 2030 there will be enough agricultural and forest resources to sustainably provide at least one billion dry tons of biomass annually, enough to displace approximately 30% of the country's current petroleum consumption. A portion of these resources are inaccessible at current cost targets with conventional feedstock supply systems because of their remoteness or low yields. Reliable analyses and projections of US biofuels production depend on assumptions about the supply system and biorefinery capacity, which, in turn, depend upon economic value, feedstock logistics, and sustainability. A cross-functional team has examined combinations of advances in feedstock supply systems and biorefinery capacities with rigorous design information, improved crop yield and agronomic practices, and improved estimates of sustainable biomass availability. A previous report on biochemical refinery capacity noted that under advanced feedstock logistic supply systems that include depots and pre-processing operations there are cost advantages that support larger biorefineries up to 10 000 DMT/day facilities compared to the smaller 2000 DMT/day facilities. This report focuses on analyzing conventional versus advanced depot biomass supply systems for a thermochemical conversion and refinery sizing based on woody biomass. The results of this analysis demonstrate that the economies of scale enabled by advanced logistics offsets much of the added logistics costs from additional depot processing and transportation, resulting in a small overall increase to the minimum ethanol selling price compared to the conventional logistic supply system. While the overall costs do increase slightly for the advanced logistic supply systems, the ability to mitigate moisture and ash in the system will improve the storage and conversion processes. In addition, being able to draw on feedstocks from further distances will decrease the risk of biomass supply to

LCA of 1,4-Butanediol Produced via Direct Fermentation of Sugars from Wheat Straw Feedstock within a Territorial Biorefinery

Directory of Open Access Journals (Sweden)

Annachiara Forte

2016-07-01

Full Text Available The bio-based industrial sector has been recognized by the European Union as a priority area toward sustainability, however, the environmental profile of bio-based products needs to be further addressed. This study investigated, through the Life Cycle Assessment (LCA approach, the environmental performance of bio-based 1,4-butanediol (BDO produced via direct fermentation of sugars from wheat straw, within a hypothetical regional biorefinery (Campania Region, Southern Italy. The aim was: (i to identify the hotspots along the production chain; and (ii to assess the potential environmental benefits of this bio-based polymer versus the reference conventional product (fossil-based BDO. Results identified the prevailing contribution to the total environmental load of bio-based BDO in the feedstock production and in the heat requirement at the biorefinery plant. The modeled industrial bio-based BDO supply chain, showed a general reduction of the environmental impacts compared to the fossil-based BDO. The lowest benefits were gained in terms of acidification and eutrophication, due to the environmental load of the crop phase for feedstock cultivation.

Overview of Dynamics Integration Research (DIR) program at Langley Research Center

Science.gov (United States)

Sliwa, Steven M.; Abel, Irving

1989-01-01

Research goals and objectives for an ongoing activity at Langley Research Center (LaRC) are described. The activity is aimed principally at dynamics optimization for aircraft. The effort involves active participation by the Flight Systems, Structures, and Electronics directorates at LaRC. The Functional Integration Technology (FIT) team has been pursuing related goals since 1985. A prime goal has been the integration and optimization of vehicle dynamics through collaboration at the basic principles or equation level. Some significant technical progress has been accomplished since then and is reflected here. An augmentation for this activity, Dynamics Integration Research (DIR), has been proposed to NASA Headquarters and is being considered for funding in FY 1990 or FY 1991.

Solvent consumption in non-catalytic alcohol solvolysis of biorefinery lignin

DEFF Research Database (Denmark)

Nielsen, J. B.; Jensen, A.; Schandel, Christian Bækhøj

2017-01-01

Lignin solvolysis in supercritical alcohols provides a method for producing a deoxygenated liquid bio-oil. Solvent consumption is however inevitable and due to the high cost of alcohols, relative to a bio-oil product, it can hinder commercial viability. In order to investigate the reactions...... of solvent consumption we studied solvolysis of biorefinery lignin in several primary alcohols. Lignin solvolysis in methanol, ethanol, 1-propanol and 1-butanol performed similarly with respect to bio-oil composition; however, methanol gave much lower bio-oil yield. Solvent consumption increases...... with reaction temperature for all alcohols and from 10 wt% at 300 °C to 35 wt% at 400 °C when using ethanol. The mechanism for solvent consumption was found mainly to take place through three different reactions: direct decomposition to gas through decarbonylation, formation of light condensation products...

Integrating meteorology into research on migration.

Science.gov (United States)

Shamoun-Baranes, Judy; Bouten, Willem; van Loon, E Emiel

2010-09-01

Atmospheric dynamics strongly influence the migration of flying organisms. They affect, among others, the onset, duration and cost of migration, migratory routes, stop-over decisions, and flight speeds en-route. Animals move through a heterogeneous environment and have to react to atmospheric dynamics at different spatial and temporal scales. Integrating meteorology into research on migration is not only challenging but it is also important, especially when trying to understand the variability of the various aspects of migratory behavior observed in nature. In this article, we give an overview of some different modeling approaches and we show how these have been incorporated into migration research. We provide a more detailed description of the development and application of two dynamic, individual-based models, one for waders and one for soaring migrants, as examples of how and why to integrate meteorology into research on migration. We use these models to help understand underlying mechanisms of individual response to atmospheric conditions en-route and to explain emergent patterns. This type of models can be used to study the impact of variability in atmospheric dynamics on migration along a migratory trajectory, between seasons and between years. We conclude by providing some basic guidelines to help researchers towards finding the right modeling approach and the meteorological data needed to integrate meteorology into their own research. © The Author 2010. Published by Oxford University Press on behalf of the Society for Integrative and Comparative Biology. All rights reserved.

Lignocellulosic biorefinery for waste-free manufacturing of phytoestrogens belonging to lignans, sugars for production of ethanol and growing medium

Czech Academy of Sciences Publication Activity Database

Váchalová, R.; Marešová, I.; Kolář, L.; Váchal, J.; Tříska, Jan

2014-01-01

Roč. 59, č. 4 (2014), s. 593-604 ISSN 1336-4561 R&D Projects: GA MŠk(CZ) ED1.1.00/02.0073; GA MŠk(CZ) LD11016 Institutional support: RVO:67179843 Keywords : Lignocellulosic biorefinery * lignans * hydrolysis * growing media * separated substance of digestates Subject RIV: EH - Ecology, Behaviour Impact factor: 0.364, year: 2014

Replacing the Whole Barrel To Reduce U.S. Dependence on Oil

Energy Technology Data Exchange (ETDEWEB)

None

2013-05-13

This overview provides highlights of the DOE Bioenergy Technologies Office's major research, development, demonstration, and deployment activities to advance biomass conversion, technology integration in biorefineries, and supply logistics to provide a secure, sustainable supply of advanced biofuels.

Human Research Program Integrated Research Plan. Revision A January 2009

Science.gov (United States)

2009-01-01

The Integrated Research Plan (IRP) describes the portfolio of Human Research Program (HRP) research and technology tasks. The IRP is the HRP strategic and tactical plan for research necessary to meet HRP requirements. The need to produce an IRP is established in HRP-47052, Human Research Program - Program Plan, and is under configuration management control of the Human Research Program Control Board (HRPCB). Crew health and performance is critical to successful human exploration beyond low Earth orbit. The Human Research Program (HRP) is essential to enabling extended periods of space exploration because it provides knowledge and tools to mitigate risks to human health and performance. Risks include physiological and behavioral effects from radiation and hypogravity environments, as well as unique challenges in medical support, human factors, and behavioral or psychological factors. The Human Research Program (HRP) delivers human health and performance countermeasures, knowledge, technologies and tools to enable safe, reliable, and productive human space exploration. Without HRP results, NASA will face unknown and unacceptable risks for mission success and post-mission crew health. This Integrated Research Plan (IRP) describes HRP s approach and research activities that are intended to address the needs of human space exploration and serve HRP customers and how they are integrated to provide a risk mitigation tool. The scope of the IRP is limited to the activities that can be conducted with the resources available to the HRP; it does not contain activities that would be performed if additional resources were available. The timescale of human space exploration is envisioned to take many decades. The IRP illustrates the program s research plan through the timescale of early lunar missions of extended duration.

Biorefinery of the green seaweed Ulva lactuca to produce animal feed, chemicals and biofuels.

Science.gov (United States)

Bikker, Paul; van Krimpen, Marinus M; van Wikselaar, Piet; Houweling-Tan, Bwee; Scaccia, Nazareno; van Hal, Jaap W; Huijgen, Wouter J J; Cone, John W; López-Contreras, Ana M

2016-01-01

The growing world population demands an increase in animal protein production. Seaweed may be a valuable source of protein for animal feed. However, a biorefinery approach aimed at cascading valorisation of both protein and non-protein seaweed constituents is required to realise an economically feasible value chain. In this study, such a biorefinery approach is presented for the green seaweed Ulva lactuca containing 225 g protein ( N  × 4.6) kg -1 dry matter (DM). The sugars in the biomass were solubilised by hot water treatment followed by enzymatic hydrolysis and centrifugation resulting in a sugar-rich hydrolysate (38.8 g L -1 sugars) containing glucose, rhamnose and xylose, and a protein-enriched (343 g kg -1 in DM) extracted fraction. This extracted fraction was characterised for use in animal feed, as compared to U. lactuca biomass. Based on the content of essential amino acids and the in vitro N (85 %) and organic matter (90 %) digestibility, the extracted fraction seems a promising protein source in diets for monogastric animals with improved characteristics as compared to the intact U. lactuca . The gas production test indicated a moderate rumen fermentation of U. lactuca and the extracted fraction, about similar to that of alfalfa. Reduction of the high content of minerals and trace elements may be required to allow a high inclusion level of U. lactuca products in animal diets. The hydrolysate was used successfully for the production of acetone, butanol, ethanol and 1,2-propanediol by clostridial fermentation, and the rhamnose fermentation pattern was studied.

A biorefinery concept for simultaneous recovery of cellulosic ethanol and phenolic compounds from oil palm fronds: Process optimization

International Nuclear Information System (INIS)

Ofori-Boateng, Cynthia; Lee, Keat Teong; Saad, Bahruddin

2014-01-01

Highlights: • Biorefinery concept for simultaneous recovery of cellulose and phenolic compounds. • Sono-assisted organosolv/H 2 O 2 pretreatment was used to isolate palm fronds cellulose. • Optimum conditions for pretreatment: 60 °C, 40 min, 1:20 g/ml, 3% NaOH concentration. • Optimum conditions yielded 55.3% cellulose, 20.1 g/l glucose and 0.769 g/g ethanol. • Pretreatment liquor contained 4.691 mg GAE/g phenolics. - Abstract: In this study, process optimization of an ultrasonic-assisted organosolv/liquid oxidative pretreatment (SOP) of oil palm fronds (OPFs) for the simultaneous recovery of cellulose, bioethanol and biochemicals (i.e. phenolic compounds) in a biorefinery concept was carried out. The effects of time (30–60 min.), temperature (40–80 °C), NaOH concentration (1–5%) and sample:solvent ratio (1:10–1:50 g/ml) on cellulose content, bioethanol yield and total phenolics contents (TPC) after SOP were investigated. At optimum conditions of pretreatment (i.e. 60 °C, 40 min, 3% w/v aq. NaOH and 1:20 g/ml sample to solvent ratio), the recovered cellulose (55.30%) which served as substrate for enzymatic hydrolysis and subsequent fermentation yielded about 20.1 g/l glucose, 11.3 g/l xylose and 9.3 g/l bioethanol (yield of 0.769 g/g). The pretreatment liquor (mostly regarded as wastes) obtained at the optimum pretreatment conditions contained about 4.691 mg gallic acid equivalent (GAE)/g OPFs of TPC, 0.297 mg vanillic acid (VA)/g OPFs, 1.591 mg gallic acid (GA)/g OPFs and 0.331 mg quercetin (QU)/g OPFs. The pretreatment liquor was again analyzed to possess high antiradical scavenging activity (about 97.2%) compared to the synthetic antioxidant, 3,5-di-tert-butyl-4-hydroxytoluene (BHT) (80.7%) at 100 ppm. Thus one sustainable way of managing wastes in biorefinery is the recovery of multi-bioproducts (e.g. bioethanol and biochemicals) during the pretreatment process

A Review of Biorefinery Separations for Bioproduct Production via Thermocatalytic Processing.

Science.gov (United States)

Nguyen, Hannah; DeJaco, Robert F; Mittal, Nitish; Siepmann, J Ilja; Tsapatsis, Michael; Snyder, Mark A; Fan, Wei; Saha, Basudeb; Vlachos, Dionisios G

2017-06-07

With technological advancement of thermocatalytic processes for valorizing renewable biomass carbon, development of effective separation technologies for selective recovery of bioproducts from complex reaction media and their purification becomes essential. The high thermal sensitivity of biomass intermediates and their low volatility and high reactivity, along with the use of dilute solutions, make the bioproducts separations energy intensive and expensive. Novel separation techniques, including solvent extraction in biphasic systems and reactive adsorption using zeolite and carbon sorbents, membranes, and chromatography, have been developed. In parallel with experimental efforts, multiscale simulations have been reported for predicting solvent selection and adsorption separation. We discuss various separations that are potentially valuable to future biorefineries and the factors controlling separation performance. Particular emphasis is given to current gaps and opportunities for future development.

Investigation of thermochemical biorefinery sizing and environmental sustainability impacts for conventional supply system and distributed pre-processing supply system designs

Energy Technology Data Exchange (ETDEWEB)

David J. Muth, Jr.; Matthew H. Langholtz; Eric C. D. Tan; Jacob J. Jacobson; Amy Schwab; May M. Wu; Andrew Argo; Craig C. Brandt; Kara G. Cafferty; Yi-Wen Chiu; Abhijit Dutta; Laurence M. Eaton; Erin M. Searcy

2014-08-01

The 2011 US Billion-Ton Update estimates that by 2030 there will be enough agricultural and forest resources to sustainably provide at least one billion dry tons of biomass annually, enough to displace approximately 30% of the country's current petroleum consumption. A portion of these resources are inaccessible at current cost targets with conventional feedstock supply systems because of their remoteness or low yields. Reliable analyses and projections of US biofuels production depend on assumptions about the supply system and biorefinery capacity, which, in turn, depend upon economic value, feedstock logistics, and sustainability. A cross-functional team has examined combinations of advances in feedstock supply systems and biorefinery capacities with rigorous design information, improved crop yield and agronomic practices, and improved estimates of sustainable biomass availability. A previous report on biochemical refinery capacity noted that under advanced feedstock logistic supply systems that include depots and pre-processing operations there are cost advantages that support larger biorefineries up to 10 000 DMT/day facilities compared to the smaller 2000 DMT/day facilities. This report focuses on analyzing conventional versus advanced depot biomass supply systems for a thermochemical conversion and refinery sizing based on woody biomass. The results of this analysis demonstrate that the economies of scale enabled by advanced logistics offsets much of the added logistics costs from additional depot processing and transportation, resulting in a small overall increase to the minimum ethanol selling price compared to the conventional logistic supply system. While the overall costs do increase slightly for the advanced logistic supply systems, the ability to mitigate moisture and ash in the system will improve the storage and conversion processes. In addition, being able to draw on feedstocks from further distances will decrease the risk of biomass supply to

Scientific misconduct and research integrity for the bench scientist.

Science.gov (United States)

Pascal, C B

2000-09-01

This paper describes the role of the Office of Research Integrity (ORI), a component of the Public Health Service (PHS), in defining scientific misconduct in research supported with PHS funds and in establishing standards for responding to allegations of misconduct. The principal methods by which ORI exercises its responsibilities in this area are defining what types of behaviors undertaken by research investigators constitute misconduct, overseeing institutional efforts to investigate and report misconduct, and recommending to the Assistant Secretary for Health (ASH) PHS administrative actions when misconduct is identified. ORI also takes affirmative steps to promote research integrity through education, training, and other initiatives. The role of the research institution in responding to misconduct and promoting research integrity is complementary and overlapping with ORI's efforts but, as the employer of research investigators and front-line manager of the research, the institution has a greater opportunity to promote the highest standards of integrity in the day-to-day conduct of research. Finally, legal precedent established through civil litigation has played an important role in defining the standards that apply in determining when a breach of research integrity has occurred.

Fostering Collaborations towards Integrative Research Development

Directory of Open Access Journals (Sweden)

Leonie Valentine

2013-05-01

Full Text Available The complex problems associated with global change processes calls for close collaboration between science disciplines to create new, integrated knowledge. In the wake of global change processes, forests and other natural environments have been rapidly changing, highlighting the need for collaboration and integrative research development. Few tools are available to explore the potential for collaborations in research ventures that are just starting up. This study presents a useful approach for exploring and fostering collaborations between academics working in research teams and organizations comprising multiple science disciplines (i.e., multi-disciplinary. The research aim was to reveal potential barriers, common ground, and research strengths between academics working in a new centre focused on forest and climate change research. This aim was based on the premise that raising awareness and working with this acquired knowledge fosters collaborations and integrative research development. An email survey was deployed amongst the academics to obtain: (i their understanding of common themes (e.g., climate change, scale of investigation, woodland/forest health/decline; (ii descriptions of the spatial and temporal scales of their research; and (iii their approach and perceived contributions to climate change research. These data were analysed using a semi-quantitative content analysis approach. We found that the main potential barriers were likely to be related to differences in understanding of the common research themes, whilst similarities and disciplinary strengths provided critical elements to foster collaborations. These findings were presented and discussed amongst the centre academics to raise awareness and create a dialogue around these issues. This process resulted in the development of four additional research projects involving multiple disciplines. The approach used in this study provides a useful methodology of broader benefit to

Integration: An Agenda for Developmental Research.

Science.gov (United States)

Scholnick, Ellin Kofsky

2001-01-01

Finds Bloom and Tinker's description and measurement of active, integrated, and situated children to be a credible scientifically rigorous paradigm for language acquisition research. Highlights their use of the naturalistic, observational method to understand the changing patterns of integration and use of multifaceted abilities in child language…

Conceptual Biorefinery Design and Research Targeted for 2022: Hydrothermal Liquefacation Processing of Wet Waste to Fuels

Energy Technology Data Exchange (ETDEWEB)

Snowden-Swan, Lesley J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhu, Yunhua [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Bearden, Mark D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Seiple, Timothy E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Jones, Susanne B. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Schmidt, Andrew J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Billing, Justin M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hallen, Richard T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hart, Todd R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Liu, Jian [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Albrecht, Karl O. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Fox, Samuel P. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Maupin, Gary D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Elliott, Douglas C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2017-12-28

represents a goal case for the pathway, targeting performance that is anticipated to be achievable by 2022 with further research and development. The year 2022 is BETO’s target year for verification of hydrocarbon biofuel pathways. As this analysis represents a goal case, assumed values of several design parameters represent improvements in the technology relative to what has currently been demonstrated in the laboratory. While HTL is fairly well developed and may therefore be ready for commercialization prior to 2022, there are specific advancements addressed in this analysis that are necessary to enhance performance compared to what has been demonstrated to date. In addition, an important aspect to the pathway is the upgrading of biocrude to fuel blendstock, an area that has received much less attention and requires significant research to validate the goal case performance parameters. The estimated plant gate minimum fuel selling price for fuel blendstock from sludge HTL and upgrading is $3.46/gasoline gallon equivalent (gge). This price is within the tolerance (+$0.49/gge) of BETO’s $3/gge programmatic cost target and illustrates that fuel blendstocks generated from HTL of sludge and centralized biocrude upgrading have the potential to be competitive with fossil fuels. This analysis illustrates the feasibility of HTL for point-of-generation conversion of waste feedstock at a scale 1/20th that of the standard lignocellulosic biorefinery scale typically used in BETO design cases. The relevance of this work reaches beyond wastewater treatment sludge to lay the groundwork for application to other distributed wet wastes and blends that together represent a significant resource of underutilized biomass.

A Framework for Sustainable Design of Algal Biorefineries: Economic Aspects and Life Cycle Analysis

DEFF Research Database (Denmark)

Cheali, Peam; Loureiro da Costa Lira Gargalo, Carina; Gernaey, Krist

2015-01-01

mathematically as a mixed integer nonlinear programming problem, and is solved first to identify the optimal designs with respect to economic optimality. These optimal designs are then analyzed further in terms of environmental performance using life cycle analysis. For sustainability analysis, in total five...... of algae feedstock for the production of biodiesel and co-products. Relevant data and parameters for each process such as yield, conversion, operational cost is then collected using a standardized format (a generic model) and stored in a database. The sustainable design problem is then formulated...... of future and sustainable algal biorefinery concepts....

Elemental analysis of various biomass solid fractions in biorefineries by X-ray fluorescence spectrometry

DEFF Research Database (Denmark)

Le, Duy Michael; Sorensen, Hanne R.; Meyer, Anne S.

2017-01-01

, poplar) followed by enzymatic hydrolysis and fermentation. For all the different biomasses, the biorefinery process concentrated silicon, aluminium, and calcium in the solid fraction, while potassium and magnesium were solubilised in the process and removed from the solid fraction. Sodium concentrations....... Based on ultimate elemental analysis of all biomasses, the formula for biomass was C6H8.4O3.5, which was used for all types of samples (raw biomass, pretreated biomass, and lignin residue) and can be used in future XRF analysis of samples of similar process and biomass feedstock as those used...

Lignin Valorization: Emerging Approaches

Energy Technology Data Exchange (ETDEWEB)

Beckham, Gregg T [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2018-04-03

Lignin, an aromatic biopolymer found in plant cell walls, is a key component of lignocellulosic biomass and generally utilized for heat and power. However, lignin's chemical composition makes it an attractive source for biological and catalytic conversion to fuels and chemicals. Bringing together experts from biology, catalysis, engineering, analytical chemistry, and techno-economic/life-cycle analysis, Lignin Valorization presents a comprehensive, interdisciplinary picture of how lignocellulosic biorefineries could potentially employ lignin valorization technologies. Chapters will specifically focus on the production of fuels and chemicals from lignin and topics covered include (i) methods for isolating lignin in the context of the lignocellulosic biorefinery, (ii) thermal, chemo-catalytic, and biological methods for lignin depolymerization, (iii) chemo-catalytic and biological methods for upgrading lignin, (iv) characterization of lignin, and (v) techno-economic and life-cycle analysis of integrated processes to utilize lignin in an integrated biorefinery. The book provides the latest breakthroughs and challenges in upgrading lignin to fuels and chemicals for graduate students and researchers in academia, governmental laboratories, and industry interested in biomass conversion.

Data integration in biological research: an overview.

Science.gov (United States)

Lapatas, Vasileios; Stefanidakis, Michalis; Jimenez, Rafael C; Via, Allegra; Schneider, Maria Victoria

2015-12-01

Data sharing, integration and annotation are essential to ensure the reproducibility of the analysis and interpretation of the experimental findings. Often these activities are perceived as a role that bioinformaticians and computer scientists have to take with no or little input from the experimental biologist. On the contrary, biological researchers, being the producers and often the end users of such data, have a big role in enabling biological data integration. The quality and usefulness of data integration depend on the existence and adoption of standards, shared formats, and mechanisms that are suitable for biological researchers to submit and annotate the data, so it can be easily searchable, conveniently linked and consequently used for further biological analysis and discovery. Here, we provide background on what is data integration from a computational science point of view, how it has been applied to biological research, which key aspects contributed to its success and future directions.

Data-Intensive Science and Research Integrity.

Science.gov (United States)

Resnik, David B; Elliott, Kevin C; Soranno, Patricia A; Smith, Elise M

2017-01-01

In this commentary, we consider questions related to research integrity in data-intensive science and argue that there is no need to create a distinct category of misconduct that applies to deception related to processing, analyzing, or interpreting data. The best way to promote integrity in data-intensive science is to maintain a firm commitment to epistemological and ethical values, such as honesty, openness, transparency, and objectivity, which apply to all types of research, and to promote education, policy development, and scholarly debate concerning appropriate uses of statistics.

National Renewable Energy Laboratory 2002 Research Review (Booklet)

Energy Technology Data Exchange (ETDEWEB)

Cook, G.; Epstein, K.; Brown, H.

2002-07-01

America is making a long transition to a future in which conventional, fossil fuel technologies will be displaced by new renewable energy and energy efficiency technologies. This first biannual research review describes NREL's R&D in seven technology areas--biorefineries, transportation, hydrogen, solar electricity, distributed energy, energy-efficient buildings, and low-wind-speed turbines.

Co-production of ethanol, biogas, protein fodder and natural fertilizer in organic farming – Evaluation of a concept for a farm-scale biorefinery

DEFF Research Database (Denmark)

Oleskowicz-Popiel, Piotr; Kádár, Zsófia; Heiske, Stefan

2012-01-01

The addition of a biorefinery to an organic farm was investigated, where ethanol was produced from germinated rye grains and whey, and the effluent was separated into two streams: the protein-rich solid fraction, to be used as animal feed, and the liquid fraction, which can be co-digested with cl......The addition of a biorefinery to an organic farm was investigated, where ethanol was produced from germinated rye grains and whey, and the effluent was separated into two streams: the protein-rich solid fraction, to be used as animal feed, and the liquid fraction, which can be co...... to serve as natural fertilizer. A technoeconomic analysis was also performed; total capital investment was estimated to be approximately 4 M USD. Setting a methane selling price according to available incentives for “green electricity” (0.72 USD/m3) led to a minimum ethanol selling price of 1.89 USD...

State-of-the-Art Report on Ethics of Research Integrity

International Nuclear Information System (INIS)

Kwon, Hyuk; Hahn, K. W.; Nam, Y. M.; You, B. H.; Min, B. J.

2006-04-01

The report briefly considers the generous ethical issues such as the background of philosophy, the issues of research ethics, the research integrity, the role of citation, the program and the code of research ethics. The report introduces the background of philosophy of science and elements of research ethics. It also considers the precedents of misconduct in research ethics and the ingredients to preserve the research integrity. Especially, the citation with obscure boundary between proper citation and plagiarism is carefully explored through several examples. Finally, the domestic ethics conditions are investigated on the research integrity and educational program on the responsible conduct of research. To compare the domestic situation, the educational program and the system of research integrity in EU and USA are deeply searched in Ch. 6 and Appendix III and V. To develop an educational program of research ethics and integrity, Nuclear Training Centre(NTC) collects and arranges the material and resource for research ethics

State-of-the-Art Report on Ethics of Research Integrity

Energy Technology Data Exchange (ETDEWEB)

Kwon, Hyuk; Hahn, K. W.; Nam, Y. M.; You, B. H.; Min, B. J

2006-04-15

The report briefly considers the generous ethical issues such as the background of philosophy, the issues of research ethics, the research integrity, the role of citation, the program and the code of research ethics. The report introduces the background of philosophy of science and elements of research ethics. It also considers the precedents of misconduct in research ethics and the ingredients to preserve the research integrity. Especially, the citation with obscure boundary between proper citation and plagiarism is carefully explored through several examples. Finally, the domestic ethics conditions are investigated on the research integrity and educational program on the responsible conduct of research. To compare the domestic situation, the educational program and the system of research integrity in EU and USA are deeply searched in Ch. 6 and Appendix III and V. To develop an educational program of research ethics and integrity, Nuclear Training Centre(NTC) collects and arranges the material and resource for research ethics.

The integrated system of research quality (quality of the research and research quality

Directory of Open Access Journals (Sweden)

M. V. Yurasova

2014-01-01

Full Text Available The necessity of the use of research for decision-making on the information received, are considered typical examples of the use of integrated systems research in the practice of the organization, approaches and assess the quality of research and study quality as a subject of study.

Effects of Disruption Risks on Biorefinery Location Design

Directory of Open Access Journals (Sweden)

Yun Bai

2015-02-01

Full Text Available While ever-growing bio-ethanol production poses considerable challenges to the bioenergy supply chain, the risk of refinery operation disruptions further compromises the efficiency and reliability of the energy supply system. This paper applies discrete and continuous reliable facility location models to the design of reliable bio-ethanol supply chains so that the system can hedge against potential operational disruptions. The discrete model is shown to be suitable for obtaining the exact optimality for small or moderate instances, while the continuous model has superior computational tractability for large-scale applications. The impacts of both site-independent and dependent disruptions (i.e., due to flooding are analyzed in empirical case study for the State of Illinois (one of the main biomass supply states in the U.S.. The reliable solution is compared with a deterministic solution under the same setting. It is found that refinery disruptions, especially those site-dependent ones, affect both optimal refinery deployment and the supply chain cost. Sensitivity analysis is also conducted to show how refinery failure probability and fixed cost (for building biorefineries affect optimal supply chain configuration and the total expected system cost.

Zymomonas mobilis: a novel platform for future biorefineries.

Science.gov (United States)

He, Ming Xiong; Wu, Bo; Qin, Han; Ruan, Zhi Yong; Tan, Fu Rong; Wang, Jing Li; Shui, Zong Xia; Dai, Li Chun; Zhu, Qi Li; Pan, Ke; Tang, Xiao Yu; Wang, Wen Guo; Hu, Qi Chun

2014-01-01

Biosynthesis of liquid fuels and biomass-based building block chemicals from microorganisms have been regarded as a competitive alternative route to traditional. Zymomonas mobilis possesses a number of desirable characteristics for its special Entner-Doudoroff pathway, which makes it an ideal platform for both metabolic engineering and commercial-scale production of desirable bio-products as the same as Escherichia coli and Saccharomyces cerevisiae based on consideration of future biomass biorefinery. Z. mobilis has been studied extensively on both fundamental and applied level, which will provide a basis for industrial biotechnology in the future. Furthermore, metabolic engineering of Z. mobilis for enhancing bio-ethanol production from biomass resources has been significantly promoted by different methods (i.e. mutagenesis, adaptive laboratory evolution, specific gene knock-out, and metabolic engineering). In addition, the feasibility of representative metabolites, i.e. sorbitol, bionic acid, levan, succinic acid, isobutanol, and isobutanol produced by Z. mobilis and the strategies for strain improvements are also discussed or highlighted in this paper. Moreover, this review will present some guidelines for future developments in the bio-based chemical production using Z. mobilis as a novel industrial platform for future biofineries.

Dilute alkali pretreatment of softwood pine: A biorefinery approach.

Science.gov (United States)

Safari, Ali; Karimi, Keikhosro; Shafiei, Marzieh

2017-06-01

Dilute alkali pretreatment was performed on softwood pine to maximize ethanol and biogas production via a biorefinery approach. Alkali pretreatments were performed with 0-2% w/v NaOH at 100-180°C for 1-5h. The liquid fraction of the pretreated substrates was subjected to anaerobic digestion. The solid fraction of the pretreatment was used for separate enzymatic hydrolysis and fermentation. High ethanol yields of 76.9‒78.0% were achieved by pretreatment with 2% (w/v) NaOH at 180°C. The highest biogas yield of 244mL/g volatile solid (at 25°C, 1bar) was achieved by the pretreatment with 1% (w/v) NaOH at 180°C. The highest gasoline equivalent (sum of ethanol and methane) of 197L per ton of pinewood and the lowest ethanol manufacturing cost of 0.75€/L was obtained after pretreatment with 1% NaOH at 180°C for 5h. The manufacturing cost of ethanol from untreated wood was 4.12€/L. Copyright © 2017 Elsevier Ltd. All rights reserved.

An Integrated Extravehicular Activity Research Plan

Science.gov (United States)

Abercromby, Andrew F. J.; Ross, Amy J.; Cupples, J. Scott

2016-01-01

Multiple organizations within NASA and outside of NASA fund and participate in research related to extravehicular activity (EVA). In October 2015, representatives of the EVA Office, the Crew and Thermal Systems Division (CTSD), and the Human Research Program (HRP) at NASA Johnson Space Center agreed on a formal framework to improve multi-year coordination and collaboration in EVA research. At the core of the framework is an Integrated EVA Research Plan and a process by which it will be annually reviewed and updated. The over-arching objective of the collaborative framework is to conduct multi-disciplinary cost-effective research that will enable humans to perform EVAs safely, effectively, comfortably, and efficiently, as needed to enable and enhance human space exploration missions. Research activities must be defined, prioritized, planned and executed to comprehensively address the right questions, avoid duplication, leverage other complementary activities where possible, and ultimately provide actionable evidence-based results in time to inform subsequent tests, developments and/or research activities. Representation of all appropriate stakeholders in the definition, prioritization, planning and execution of research activities is essential to accomplishing the over-arching objective. A formal review of the Integrated EVA Research Plan will be conducted annually. External peer review of all HRP EVA research activities including compilation and review of published literature in the EVA Evidence Book is already performed annually. Coordination with stakeholders outside of the EVA Office, CTSD, and HRP is already in effect on a study-by-study basis; closer coordination on multi-year planning with other EVA stakeholders including academia is being actively pursued. Details of the current Integrated EVA Research Plan are presented including description of ongoing and planned research activities in the areas of: Benchmarking; Anthropometry and Suit Fit; Sensors; Human

Development of a low-cost cellulase production process using Trichoderma reesei for Brazilian biorefineries.

Science.gov (United States)

Ellilä, Simo; Fonseca, Lucas; Uchima, Cristiane; Cota, Junio; Goldman, Gustavo Henrique; Saloheimo, Markku; Sacon, Vera; Siika-Aho, Matti

2017-01-01

During the past few years, the first industrial-scale cellulosic ethanol plants have been inaugurated. Although the performance of the commercial cellulase enzymes used in this process has greatly improved over the past decade, cellulases still represent a very significant operational cost. Depending on the region, transport of cellulases from a central production facility to a biorefinery may significantly add to enzyme cost. The aim of the present study was to develop a simple, cost-efficient cellulase production process that could be employed locally at a Brazilian sugarcane biorefinery. Our work focused on two main topics: growth medium formulation and strain improvement. We evaluated several Brazilian low-cost industrial residues for their potential in cellulase production. Among the solid residues evaluated, soybean hulls were found to display clearly the most desirable characteristics. We engineered a Trichoderma reesei strain to secrete cellulase in the presence of repressing sugars, enabling the use of sugarcane molasses as an additional carbon source. In addition, we added a heterologous β-glucosidase to improve the performance of the produced enzymes in hydrolysis. Finally, the addition of an invertase gene from Aspegillus niger into our strain allowed it to consume sucrose from sugarcane molasses directly. Preliminary cost analysis showed that the overall process can provide for very low-cost enzyme with good hydrolysis performance on industrially pre-treated sugarcane straw. In this study, we showed that with relatively few genetic modifications and the right growth medium it is possible to produce considerable amounts of well-performing cellulase at very low cost in Brazil using T. reesei . With further enhancements and optimization, such a system could provide a viable alternative to delivered commercial cellulases.

Intracellular cellobiose metabolism and its applications in lignocellulose-based biorefineries.

Science.gov (United States)

Parisutham, Vinuselvi; Chandran, Sathesh-Prabu; Mukhopadhyay, Aindrila; Lee, Sung Kuk; Keasling, Jay D

2017-09-01

Complete hydrolysis of cellulose has been a key characteristic of biomass technology because of the limitation of industrial production hosts to use cellodextrin, the partial hydrolysis product of cellulose. Cellobiose, a β-1,4-linked glucose dimer, is a major cellodextrin of the enzymatic hydrolysis (via endoglucanase and exoglucanase) of cellulose. Conversion of cellobiose to glucose is executed by β-glucosidase. The complete extracellular hydrolysis of celluloses has several critical barriers in biomass technology. An alternative bioengineering strategy to make the bioprocessing less challenging is to engineer microbes with the abilities to hydrolyze and assimilate the cellulosic-hydrolysate cellodextrin. Microorganisms engineered to metabolize cellobiose rather than the monomeric glucose can provide several advantages for lignocellulose-based biorefineries. This review describes the recent advances and challenges in engineering efficient intracellular cellobiose metabolism in industrial hosts. This review also describes the limitations of and future prospectives in engineering intracellular cellobiose metabolism. Copyright © 2017 Elsevier Ltd. All rights reserved.

Prospective evaluation for the sugar cane factory transformation in biorefinery

International Nuclear Information System (INIS)

Rodríguez Plaza, Rocío; Armas Martínez, Ana Celia de; Rodríguez Carvajal, Lily Elena; García Orozco, Yamila; Torres, Alfredo

2015-01-01

The present work has as goal to evaluate prospectively alternative of transformation in the '5 de Septiembre' sugar industry, located in Cienfuegos, for a superfine alcohol biorefinery. Two alternatives were taking into account; the first one was the installation of a distillery for a capacity of 500 hl/d of superfine alcohol, using the molasses and 10% of the filters juice coming from the sugar mill, as complement of the stage of fermentation, and also a plant of biodiesel production starting from microalgae biomass and of mud separated in the sugar mill and another installation of a distillery for a similar capacity of 500 Hl/d of superfine ethanol using molasses, the filters juices and microalgae hydrolysate. For the second alternative, it intends a distillery where saving of 67 % for the molasses, and 22.73 % for the water, these results are experimentally obtained. The most feasible alternative obtain 5 years of payback period, 21 % of an IRR and U$D 37104 419.21 of NPV. (author)

A Distributed Model of Oilseed Biorefining, via Integrated Industrial Ecology Exchanges

Science.gov (United States)

Ferrell, Jeremy C.

As the demand for direct petroleum substitutes increases, biorefineries are poised to become centers for conversion of biomass into fuels, energy, and biomaterials. A distributed model offers reduced transportation, tailored process technology to available feedstock, and increased local resilience. Oilseeds are capable of producing a wide variety of useful products additive to food, feed, and fuel needs. Biodiesel manufacturing technology lends itself to smaller-scale distributed facilities able to process diverse feedstocks and meet demand of critical diesel fuel for basic municipal services, safety, sanitation, infrastructure repair, and food production. Integrating biodiesel refining facilities as tenants of eco-industrial parks presents a novel approach for synergistic energy and material exchanges whereby environmental and economic metrics can be significantly improved upon compared to stand alone models. This research is based on the Catawba County NC EcoComplex and the oilseed crushing and biodiesel processing facilities (capacity-433 tons biodiesel per year) located within. Technical and environmental analyses of the biorefinery components as well as agronomic and economic models are presented. The life cycle assessment for the two optimal biodiesel feedstocks, soybeans and used cooking oil, resulted in fossil energy ratios of 7.19 and 12.1 with carbon intensity values of 12.51 gCO2-eq/MJ and 7.93 gCO2-eq/MJ, respectively within the industrial ecology system. Economic modeling resulted in a biodiesel conversion cost of 1.43 per liter of fuel produced with used cooking oil, requiring a subsidy of 0.58 per liter to reach the break-even point. As subsidies continue significant fluctuation, metrics other than operating costs are required to justify small-scale biofuel projects.

Recovery Act: Beneficial CO{sub 2} Capture in an Integrated Algal Biorefinery for Renewable Generation and Transportation Fuels

Energy Technology Data Exchange (ETDEWEB)

Lane, Christopher; Hampel, Kristin; Rismani-Yazdi, Hamid; Kessler, Ben; Moats, Kenneth; Park, Jonathan; Schwenk, Jacob; White, Nicholas; Bakhit, Anis; Bargiel, Jeff; Allnutt, F. C.

2014-03-31

DOE DE-FE0001888 Award, Phase 2, funded research, development, and deployment (RD&D) of Phycal’s pilot-scale, algae to biofuels, bioproducts, and processing facility in Hawai’i. Phycal’s algal-biofuel and bioproducts production system integrates several novel and mature technologies into a system that captures and reuses industrially produced carbon dioxide emissions, which would otherwise go directly to the atmosphere, for the manufacture of renewable energy products and bioproducts from algae (note that these algae are not genetically engineered). At the end of Phase 2, the project as proposed was to encompass 34 acres in Central Oahu and provide large open ponds for algal mass culturing, heterotrophic reactors for the Heteroboost™ process, processing facilities, water recycling facilities, anaerobic digestion facilities, and other integrated processes. The Phase 2 award was divided into two modules, Modules 1 & 2, where the Module 1 effort addressed critical scaling issues, tested highest risk technologies, and set the overall infrastructure needed for a Module 2. Phycal terminated the project prior to executing construction of the first Module. This Final Report covers the development research, detailed design, and the proposed operating strategy for Module 1 of Phase 2.

FTR GO14246

Energy Technology Data Exchange (ETDEWEB)

Bentley, Martha

2008-06-30

The Maine Forest Bioproducts Research and Development project originally focused on the State’s interest in the development of an integrated forest products refinery (IFPR). The original intent was that Research and Development (R&D) funded by this award will allow Maine to refine its strategy and pursue development of an integrated biorefinery. Activities were to be divided into three major R&D projects: (a) Establish the potential for a forest products biorefinery in Maine, by determining the technical and economic feasibility and resource availability. (b) Investigate and develop conversion processes for forest bioproducts to utilize the sugars available from hemicellulose. Research projects will determine how to best utilize refinery waste streams to recover heat value and recycle remaining components. (c) Cost share very early stage R&D efforts to engage the private sector and stimulate innovative efforts that will build upon the research efforts in (b) above, utilize the information gleaned from (a), and lead to commercialization of new products or services and development of the forest bioproducts industrial sector in Maine.

Sugar-Based Ethanol Biorefinery: Ethanol, Succinic Acid and By-Product Production

Energy Technology Data Exchange (ETDEWEB)

Donal F. Day

2009-03-31

The work conducted in this project is an extension of the developments itemized in DE-FG-36-04GO14236. This program is designed to help the development of a biorefinery based around a raw sugar mill, which in Louisiana is an underutilized asset. Some technical questions were answered regarding the addition of a biomass to ethanol facility to existing sugar mills. The focus of this work is on developing technology to produce ethanol and valuable by-products from bagasse. Three major areas are addressed, feedstock storage, potential by-products and the technology for producing ethanol from dilute ammonia pre-treated bagasse. Sugar mills normally store bagasse in a simple pile. During the off season there is a natural degradation of the bagasse, due to the composting action of microorganisms in the pile. This has serious implications if bagasse must be stored to operate a bagasse/biorefinery for a 300+ day operating cycle. Deterioration of the fermentables in bagasse was found to be 6.5% per month, on pile storage. This indicates that long term storage of adequate amounts of bagasse for year-round operation is probably not feasible. Lignin from pretreatment seemed to offer a potential source of valuable by-products. Although a wide range of phenolic compounds were present in the effluent from dilute ammonia pretreatment, the concentrations of each (except for benzoic acid) were too low to consider for extraction. The cellulosic hydrolysis system was modified to produce commercially recoverable quantities of cellobiose, which has a small but growing market in the food process industries. A spin-off of this led to the production of a specific oligosaccharide which appears to have both medical and commercial implications as a fungal growth inhibitor. An alternate use of sugars produced from biomass hydrolysis would be to produce succinic acid as a chemical feedstock for other conversions. An organism was developed which can do this bioconversion, but the economics of

Ionizing radiation and a wood-based biorefinery

International Nuclear Information System (INIS)

Driscoll, Mark S.; Stipanovic, Arthur J.; Cheng, Kun; Barber, Vincent A.; Manning, Mellony; Smith, Jennifer L.; Sundar, Smith

2014-01-01

Woody biomass is widely available around the world. Cellulose is the major structural component of woody biomass and is the most abundant polymer synthesized by nature, with hemicellulose and lignin being second and third. Despite this great abundance, woody biomass has seen limited application outside of the paper and lumber industries. Its use as a feedstock for fuels and chemicals has been limited because of its highly crystalline structure, inaccessible morphology, and limited solubility (recalcitrance). Any economic use of woody biomass for the production of fuels and chemicals requires a “pretreatment” process to enhance the accessibility of the biomass to enzymes and/or chemical reagents. Electron beams (EB), X-rays, and gamma rays produce ions in a material which can then initiate chemical reactions and cleavage of chemical bonds. Such ionizing radiation predominantly scissions and degrades or depolymerizes both cellulose and hemicelluloses, less is known about its effects on lignin. This paper discusses how ionizing radiation can be used to make a wood-based biorefinery more environmentally friendly and profitable for its operators. - Highlights: • Ionizing radiation reduces the crystallinity of cellulose. • Ionizing radiation reduces cellulose's degree of polymerization. • The amount and rate of enzymatic hydrolysis of lignocellulosic materials, including wood, are increased with increasing radiation dose. • Wood and other lignocellulosic materials have the potential to be a renewable material for the production of chemicals and fuels

Optimal design and planning of glycerol-based biorefinery supply chains under uncertainty

DEFF Research Database (Denmark)

Loureiro da Costa Lira Gargalo, Carina; Carvalho, Ana; Gernaey, Krist V.

2017-01-01

-echelon mixed integer linear programming problem is proposed based upon a previous model, GlyThink. In the new formulation, market uncertainties are taken into account at the strategic planning level. The robustness of the supply chain structures is analyzed based on statistical data provided...... by the implementation of the Monte Carlo method, where a deterministic optimization problem is solved for each scenario. Furthermore, the solution of the stochastic multi-objective optimization model, points to the Pareto set of trade-off solutions obtained when maximizing the NPV and minimizing environmental......The optimal design and planning of glycerol-based biorefinery supply chains is critical for the development and implementation of this concept in a sustainable manner. To achieve this, a decision-making framework is proposed in this work, to holistically optimize the design and planning...

Integration of operational research and environmental management

NARCIS (Netherlands)

Bloemhof - Ruwaard, J.M.

1996-01-01

The subject of this thesis is the integration of Operational Research and Environmental Management. Both sciences play an important role in the research of environmental issues. Part I describes a framework for the interactions between Operational Research and Environmental Management.

Integrating intersectionality and biomedicine in health disparities research.

Science.gov (United States)

Kelly, Ursula A

2009-01-01

Persisting health disparities have lead to calls for an increase in health research to address them. Biomedical scientists call for research that stratifies individual indicators associated with health disparities, for example, ethnicity. Feminist social scientists recommend feminist intersectionality research. Intersectionality is the multiplicative effect of inequalities experienced by nondominant marginalized groups, for example, ethnic minorities, women, and the poor. The elimination of health disparities necessitates integration of both paradigms in health research. This study provides a practical application of the integration of biomedical and feminist intersectionality paradigms in nursing research, using a psychiatric intervention study with battered Latino women as an example.

Researchers' experiences, positive and negative, in integrative landscape projects

NARCIS (Netherlands)

Tress, B.; Tress, G.; Fry, G.

2005-01-01

Integrative (interdisciplinary and transdisciplinary) landscape research projects are becoming increasingly common. As a result, researchers are spending a larger proportion of their professional careers doing integrative work, participating in shifting interdisciplinary teams, and cooperating

Lignin-rich biomass of cotton by-products for biorefineries via pyrolysis.

Science.gov (United States)

Chen, Jiao; Liang, Jiajin; Wu, Shubin

2016-10-01

Pyrolysis was demonstrated to investigate the thermal decomposition characteristics and potential of lignin-rich cotton by-products cotton exocarp (CE) and spent mushroom substrate consisted of cotton by-products (MSC) for biorefineries. The chemical component and structure alteration of CE and MSC was found to affect their thermochemical behaviors. The bio-oil yield from CE was 58.13wt% while the maximum yield from MSC was 45.01% at 600°C. The phenolic compounds obtained from CE and MSC were 33.9% and 39.2%, respectively. The yield of acetic acid from MSC between 400 and 600°C was about 30-38% lower than that from CE, which suggests the high quality of bio-oil was obtained. Biochar from MSC via slow pyrolysis had a high mass yield (44.38wt%) with well-developed pore structure. Copyright © 2016 Elsevier Ltd. All rights reserved.

Kinetic study of solid phase demineralization by weak acids in one-step enzymatic bio-refinery of shrimp cuticles

OpenAIRE

Baron, Regis; Socol, Marius; Arhaliass, A.; Bruzac, Sandrine; Le Roux, Karine; Del Pino, J. Rodriguez; Berge, Jean-pascal; Kaas, Raymond

2015-01-01

We describe a one-step bio-refinery process for shrimp composites by-products. Its originality lies in a simple rapid (6 h) biotechnological cuticle fragmentation process that recovers all major compounds (chitins, peptides and minerals in particular calcium). The process consists of a controlled exogenous enzymatic proteolysis in a food-grade acidic medium allowing chitin purification (solid phase), and recovery of peptides and minerals (liquid phase). At a pH of between 3.5 and 4, protease ...

The circular economy of seaweed as nutrient management instrument for biobased production

DEFF Research Database (Denmark)

Thomsen, Marianne; Seghetta, Michele; Bruhn, Annette

portfolio (processing and cascade utilization) are needed for a seaweed biorefinery industry to become economically viable. The break-even point for the MAB3 EP biorefinery system is obtained by an increase in the seaweed productivity of a factor 2 to 4. Development of seaweed cultivation technology......A comparative analysis of the environmental and economic performance of seaweed production and biorefinery systems were modelled within the project MAB3 (www.mab3.dk). A framework for integrated sustainability modelling of the circular economy of offshore seaweed production and biorefinery systems...

Formation of degradation compounds from lignocellulosic biomass in the biorefinery: sugar reaction mechanisms

DEFF Research Database (Denmark)

Rasmussen, Helena; Sørensen, Hanne R.; Meyer, Anne S.

2014-01-01

, several aldehydes and ketones and many different organic acids and aromatic compounds may be generated during hydrothermal treatment of lignocellulosic biomass. The reaction mechanisms are of interest because the very same compounds that are possible inhibitors for biomass processing enzymes......The degradation compounds formed during pretreatment when lignocellulosic biomass is processed to ethanol or other biorefinery products include furans, phenolics, organic acids, as well as mono- and oligomeric pentoses and hexoses. Depending on the reaction conditions glucose can be converted to 5......-(hydroxymethyl)-2-furaldehyde (HMF) and/or levulinic acid, formic acid and different phenolics at elevated temperatures. Correspondingly, xylose can follow different reaction mechanisms resulting in the formation of furan-2-carbaldehyde (furfural) and/or various C-1 and C-4 compounds. At least four routes...

Research on psychotherapy integration: building on the past, looking to the future.

Science.gov (United States)

Castonguay, Louis G; Eubanks, Catherine F; Goldfried, Marvin R; Muran, J Christopher; Lutz, Wolfgang

2015-01-01

Integration has become an important and influential movement within psychotherapy practice, reflected by the fact that many treatment providers now identify as integrative. However, integration has not had as great an influence on psychotherapy research. The goal of this paper is to highlight the growing body of research on psychotherapy integration, and to identify future directions for research that may strengthen the integration movement as well as the field of psychotherapy as a whole. We first summarize the past 25 years of research on integration, with a focus on four approaches to integration: theoretical integration, technical eclectic, common factors, and assimilative integration. Next, we identify directions of research within these four areas that could strengthen and support integrative practice. We then propose ways in which the perspective of integrationists could contribute to psychotherapy research in the critical areas of harmful effects, therapist effects, practice-oriented research, and training. We end this paper by suggesting that a greater collaboration between integrationists and psychotherapy researchers will help to create a unified landscape of knowledge and action that will benefit all participants and advance the field.

Near-term deployment of carbon capture and sequestration from biorefineries in the United States.

Science.gov (United States)

Sanchez, Daniel L; Johnson, Nils; McCoy, Sean T; Turner, Peter A; Mach, Katharine J

2018-05-08

Capture and permanent geologic sequestration of biogenic CO 2 emissions may provide critical flexibility in ambitious climate change mitigation. However, most bioenergy with carbon capture and sequestration (BECCS) technologies are technically immature or commercially unavailable. Here, we evaluate low-cost, commercially ready CO 2 capture opportunities for existing ethanol biorefineries in the United States. The analysis combines process engineering, spatial optimization, and lifecycle assessment to consider the technical, economic, and institutional feasibility of near-term carbon capture and sequestration (CCS). Our modeling framework evaluates least cost source-sink relationships and aggregation opportunities for pipeline transport, which can cost-effectively transport small CO 2 volumes to suitable sequestration sites; 216 existing US biorefineries emit 45 Mt CO 2 annually from fermentation, of which 60% could be captured and compressed for pipeline transport for under $25/tCO 2 A sequestration credit, analogous to existing CCS tax credits, of $60/tCO 2 could incent 30 Mt of sequestration and 6,900 km of pipeline infrastructure across the United States. Similarly, a carbon abatement credit, analogous to existing tradeable CO 2 credits, of $90/tCO 2 can incent 38 Mt of abatement. Aggregation of CO 2 sources enables cost-effective long-distance pipeline transport to distant sequestration sites. Financial incentives under the low-carbon fuel standard in California and recent revisions to existing federal tax credits suggest a substantial near-term opportunity to permanently sequester biogenic CO 2 This financial opportunity could catalyze the growth of carbon capture, transport, and sequestration; improve the lifecycle impacts of conventional biofuels; support development of carbon-negative fuels; and help fulfill the mandates of low-carbon fuel policies across the United States. Copyright © 2018 the Author(s). Published by PNAS.

NASA Guidelines for Promoting Scientific and Research Integrity

Science.gov (United States)

Kaminski, Amy P.; Neogi, Natasha A.

2017-01-01

This guidebook provides an overarching summary of existing policies, activities, and guiding principles for scientific and research integrity with which NASA's workforce and affiliates must conform. This document addresses NASA's obligations as both a research institution and as a funder of research, NASA's use of federal advisory committees, NASA's public communication of research results, and professional development of NASA's workforce. This guidebook is intended to provide a single resource for NASA researchers, NASA research program administrators and project managers, external entities who do or might receive funding from NASA for research or technical projects, evaluators of NASA research proposals, NASA advisory committee members, NASA communications specialists, and members of the general public so that they can understand NASA's commitment to and expectations for scientific and integrity across the agency.

A biorefinery concept using the green macroalgae Chaetomorpha linum for the coproduction of bioethanol and biogas

International Nuclear Information System (INIS)

Ben Yahmed, Nesrine; Jmel, Mohamed Amine; Ben Alaya, Monia; Bouallagui, Hassib; Marzouki, M. Nejib; Smaali, Issam

2016-01-01

Highlights: • Chaetomorpha linum was used as sustainable feedstock for co-production of bioethanol and biomethane. • An eco-friendly process was developed, only generating 0.3 ± 0.01 g/g of waste. • Ethanol yield obtained was 0.41 g/g reducing sugar. • Methane yield obtained was 0.26 ± 0.045 L/gVS. - Abstract: An innovative integrated biorefinery approach using the green macroalgae Chaetomorpha linum was investigated in the present study for the co-production of bioethanol and biogas. Among three pretreatments of C. linum biomass, consisting of acidic, neutral and alkali ones, 3% NaOH pretreatment gave the best result in terms of thallus disintegration, biomass recovery and enzymatic digestibility as demonstrated by scanning electron microscopy and saccharification tests. The hydrolysis of C. linum feedstock with a crude specific enzyme preparation, locally produced from fermentation of Aspergillus awamori, at 45 °C, pH 5 for 30 h gave the maximum yield of fermentable sugar of 0.22 ± 0.02 g/g dry substrate. An ethanol yield of 0.41 g/g reducing sugar corresponding to about 0.093 g/g pretreated algae was obtained after alcoholic fermentation by Saccharomyces cerevisiae. In the integrated proposed process, mycelium issued from the fungal fermentation, liquid issued from alkali pretreatment, residual from the non-hydrolysable biomass and all effluents and co-products represent a heterogeneous substrate that feed an anaerobic digester for biogas production. GC-analysis of this later showed that the biomethane yield reached 0.26 ± 0.045 L/gVS. This study presents therefore an eco-friendly biorefining process, which efficiently coproduce bioethanol and biomethane and generate only a single waste (0.3 ± 0.01 g/g) allowing an almost complete conversion of the algal biomass.

Green Biorefinery of Giant Miscanthus for Growing Microalgae and Biofuel Production

Directory of Open Access Journals (Sweden)

Shuangning Xiu

2017-12-01

Full Text Available In this study, an innovative green biorefinery system was successfully developed to process the green biomass into multiple biofuels and bioproducts. In particular, fresh giant miscanthus was separated into a solid stream (press cake and a liquid stream (press juice using a screw press. The juice was used to cultivate microalga Chlorella vulgaris, which was further thermochemically converted via thermogravimetry analysis (TGA and pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS analysis, resulting in an approximately 80% conversion. In addition, the solid cake of miscanthus was pretreated with dilute sulfuric acid and used as the feedstock for bioethanol production. The results showed that the miscanthus juice could be a highly nutritious source for microalgae that are a promising feedstock for biofuels. The highest cell density was observed in the 15% juice medium. Sugars released from the miscanthus cake were efficiently fermented to ethanol using Saccharomyces cerevisiae through a simultaneous saccharification and fermentation (SSF process, with 88.4% of the theoretical yield.

PROSPECTIVE EVALUATION FOR THE SUGAR CANE FACTORY TRANSFORMATION IN BIOREFINERY

Directory of Open Access Journals (Sweden)

Rocío Rodríguez Plaza

2015-10-01

Full Text Available The present work has as goal to evaluate prospectively alternative of transformation in the "5 de Septiembre" sugar industry, located in Cienfuegos, for a superfine alcohol biorefinery. Two alternatives were taking into account; the first one was the installation of a distillery for a capacity of 500 hl/d of superfine alcohol, using the molasses and 10% of the filters juice coming from the sugar mill, as complement of the stage of fermentation, and also a plant of biodiesel production starting from microalgae biomass and of mud separated in the sugar mill and another installation of a distillery for a similar capacity of 500 Hl/d of superfine ethanol using molasses, the filters juices and microalgae hydrolysate. For the second alternative, it intends a distillery where saving of 67 % for the molasses, and 22.73 % for the water, these results are experimentally obtained. The most feasible alternative obtain 5 years of payback period, 21 % of an IRR and U$D 37104 419.21 of NPV.

Differing Perceptions Concerning Research Integrity Between Universities and Industry: A Qualitative Study.

Science.gov (United States)

Godecharle, Simon; Nemery, Benoit; Dierickx, Kris

2017-09-14

Despite the ever increasing collaboration between industry and universities, the previous empirical studies on research integrity and misconduct excluded participants of biomedical industry. Hence, there is a lack of empirical data on how research managers and biomedical researchers active in industry perceive the issues of research integrity and misconduct, and whether or not their perspectives differ from those of researchers and research managers active in universities. If various standards concerning research integrity and misconduct are upheld between industry and universities, this might undermine research collaborations. Therefore we performed a qualitative study by conducting 22 semi-structured interviews in order to investigate and compare the perspectives and attitudes concerning the issues of research integrity and misconduct of research managers and biomedical researchers active in industry and universities. Our study showed clear discrepancies between both groups. Diverse strategies in order to manage research misconduct and to stimulate research integrity were observed. Different definitions of research misconduct were given, indicating that similar actions are judged heterogeneously. There were also differences at an individual level, whether the interviewees were active in industry or universities. Overall, the management of research integrity proves to be a difficult exercise, due to many diverse perspectives on several essential elements connected to research integrity and misconduct. A management policy that is not in line with the vision of the biomedical researchers and research managers is at risk of being inefficient.

Supporting Theory Building in Integrated Services Research

Science.gov (United States)

Robinson, Mark; Atkinson, Mary; Downing, Dick

2008-01-01

This literature review was commissioned by the National Foundation for Educational Research (NFER) to draw together current and recent studies of integrated working, in order to build an overview of the theories and models of such working. The review is important for current work on evaluating the early impact of integrated children's services and…

Techno-environmental assessment of the green biorefinery concept: Combining process simulation and life cycle assessment at an early design stage.

Science.gov (United States)

Corona, Andrea; Ambye-Jensen, Morten; Vega, Giovanna Croxatto; Hauschild, Michael Zwicky; Birkved, Morten

2018-09-01

The Green biorefinery (GBR) is a biorefinery concept that converts fresh biomass into value-added products. The present study combines a Process Flowsheet Simulation (PFS) and Life Cycle Assessment (LCA) to evaluate the technical and environmental performance of different GBR configurations and the cascading utilization of the GBR output. The GBR configurations considered in this study, test alternatives in the three main steps of green-biorefining: fractionation, precipitation, and protein separation. The different cascade utilization alternatives analyse different options for press-pulp utilization, and the LCA results show that the environmental profile of the GBR is highly affected by the utilization of the press-pulp and thus by the choice of conventional product replaced by the press-pulp. Furthermore, scenario analysis of different GBR configurations shows that higher benefits can be achieved by increasing product yields rather than lowering energy consumption. Green biorefining is shown to be an interesting biorefining concept, especially in a Danish context. Biorefining of green biomass is technically feasible and can bring environmental savings, when compared to conventional production methods. However, the savings will be determined by the processing involved in each conversion stage and on the cascade utilization of the different platform products. Copyright © 2018 Elsevier B.V. All rights reserved.

Chemistry Based on Renewable Raw Materials: Perspectives for a Sugar Cane-Based Biorefinery

Directory of Open Access Journals (Sweden)

Murillo Villela Filho

2011-01-01

Full Text Available Carbohydrates are nowadays a very competitive feedstock for the chemical industry because their availability is compatible with world-scale chemical production and their price, based on the carbon content, is comparable to that of petrochemicals. At the same time, demand is rising for biobased products. Brazilian sugar cane is a competitive feedstock source that is opening the door to a wide range of bio-based products. This essay begins with the importance of the feedstock for the chemical industry and discusses developments in sugar cane processing that lead to low cost feedstocks. Thus, sugar cane enables a new chemical industry, as it delivers a competitive raw material and a source of energy. As a result, sugar mills are being transformed into sustainable biorefineries that fully exploit the potential of sugar cane.

BER-Myriant Succinic Acid Biorefinery

Energy Technology Data Exchange (ETDEWEB)

Shmorhun, Mark [Myriant Lake Providence, Inc., Lake Providence, LA (United States)

2015-12-31

Myriant Corporation (Myriant) has successfully produced the bioproduct succinic acid by the fermentation of glucose at a commercial scale operation in Lake Providence, Louisiana. The MySAB facility (Myriant Succinic Acid Biorefinery) came on stream in May 2013 and has been producing product since then. The MySAB facility is a demonstration-scale plant, capable of utilizing sorghum grits and commercially available dextrose, to ferment glucose into succinic acid. A downstream processing train has demonstrated the ability to produce an industrial, a standard and a polymer grade product. It consists of cell separation, membrane filtration, continuous chromatography, polishing to remove ionic and color bodies impurities, and final evaporation and crystallization. A by-product of the process is ammonium sulfate which is sold as a liquid fertilizer product. Since 2007 when development work began in the Woburn, Massachusetts R&D laboratories, the succinic acid bio-process has evolved through: Process development (microbiology, fermentation, and downstream) – R&D development laboratories; Piloting efforts at Fermic S.A. de C.V., Mexico City, Mexico – upstream and downstream processes; Design, construction, commissioning, and commercial production operations at the MySAB facility Additionally, Myriant became a wholly-owned subsidiary of the PTT Global Chemical Plc., Thailand, in late 2015, their investment into and support of Myriant goes back to 2011. The support of PTT Global Chemical Plc. helped to improve the upstream and downstream processes, and produce significant metric ton quantities of high quality bio-based succinic acid. The product has gone into a number of commercial markets worldwide for customer applications, development and production. The experience base gained via operations at the MySAB facility since May 2013, along with continued R&D development efforts involving Microbiology, Fermentation, and Downstream processes, at both the Woburn, Massachusetts

Clarifying the Imperative of Integration Research for Sustainable Environmental Management

Directory of Open Access Journals (Sweden)

Stephen Dovers

2005-01-01

Full Text Available This paper discusses why integration is important in doing research for developing policy and practice of sustainable environmental management. The imperative of integration includes environmental, social, economic, and other disciplinary considerations, as well as stakeholder interests. However, what is meant by integration is not always clear. While the imperative is being increasingly enunciated, the challenges it presents are difficult and indicate a long term pursuit. This paper clarifies the different dimensions of integration, as an important preliminary step toward advancing mutual understanding and the development of approaches. The paper identifies the driving forces for integration, discusses when integration is required, categorises forms of integration, and proposes principles to inform research programs and projects.

Microalgae based biorefinery: evaluation of oil extraction methods in terms of efficiency, costs, toxicity and energy in lab-scale

Directory of Open Access Journals (Sweden)

Ángel Darío González-Delgado

2013-06-01

Full Text Available Several alternatives of microalgal metabolites extraction and transformation are being studied for achieving the total utilization of this energy crop of great interest worldwide. Microalgae oil extraction is a key stage in microalgal biodiesel production chains and their efficiency affects significantly the global process efficiency. In this study, a comparison of five oil extraction methods in lab-scale was made taking as additional parameters, besides extraction efficiency, the costs of method performing, energy requirements, and toxicity of solvents used, in order to elucidate the convenience of their incorporation to a microalgae-based topology of biorefinery. Methods analyzed were Solvent extraction assisted with high speed homogenization (SHE, Continuous reflux solvent extraction (CSE, Hexane based extraction (HBE, Cyclohexane based extraction (CBE and Ethanol-hexane extraction (EHE, for this evaluation were used the microalgae strains Nannochloropsis sp., Guinardia sp., Closterium sp., Amphiprora sp. and Navicula sp., obtained from a Colombian microalgae bioprospecting. In addition, morphological response of strains to oil extraction methods was also evaluated by optic microscopy. Results shows that although there is not a unique oil extraction method which excels in all parameters evaluated, CSE, SHE and HBE appears as promising alternatives, while HBE method is shown as the more convenient for using in lab-scale and potentially scalable for implementation in a microalgae based biorefinery

Product quality optimization in an integrated biorefinery: Conversion of pistachio nutshell biomass to biofuels and activated biochars via pyrolysis

International Nuclear Information System (INIS)

Işıtan, Seçil; Ceylan, Selim; Topcu, Yıldıray; Hintz, Chloe; Tefft, Juliann; Chellappa, Thiago; Guo, Jicheng; Goldfarb, Jillian L.

2016-01-01

Highlights: • Pyrolysis temperature key variable in manipulating biofuel quality. • Pyrolysis temperature does not impact activated biochar surface area. • Activation temperature key variable to optimize surface area of pistachio biochar. • Statistical model accurately predicts surface area of biochar, especially above 600 m"2/g. - Abstract: An economically viable transition to a renewable, sustainable energy future hinges on the ability to simultaneously produce multiple high value products from biomass precursors. Though there is considerable literature on the thermochemical conversion of biomass to biofuels and biochars, there are few holistic examinations that seek to understand trade-offs between biofuel quality and the associated pyrolysis conditions on activated carbons made from the resulting biochars. Using an Ordinary Least Squares regression analysis, this study probes the impact of pyrolysis and activation temperature on surface areas and pore volumes for 28 carbon dioxide-activated carbons. Activation temperature has the largest single impact of any other variable; increasing the temperature from 800 to 900 °C leads to an increase in surface area of more than 300 m"2/g. Contrary to some prior results, pyrolysis temperature has minimal effect on the resulting surface area and pore volume, suggesting that optimizing the temperature at which biofuels are extracted will have little impact on carbon dioxide-activated carbons. Increasing pyrolysis temperature increases methane formation but decreases gaseous hydrocarbons. Bio-oil obtained at lower pyrolysis temperatures shows fewer oxygenated compounds, indicating a greater stability, but higher pyrolysis temperatures maximize production of key biorefinery intermediaries such as furans. By analyzing data in such a holistic manner, it may be possible to optimize the production of biofuels and activated carbons from biomass by minimizing the amount of raw materials and energy necessary to maximize

A process integration approach for the production of biological iso-propanol, butanol and ethanol using gas stripping and adsorption as recovery methods

NARCIS (Netherlands)

Pyrgakis, Konstantinos A.; Vrije, de G.J.; Siegers-Budde, M.A.W.; Kyriakou, Kyriakos; Lopez Contreras, A.M.; Kokossis, Antonis C.

2016-01-01

Biomass fermentation to Iso-propanol, Butanol and Ethanol (IBE) is particularly important as IBE is a common building block in the development of biorefineries and IBE-producing bacteria are robust industrial organisms, capable to utilize the sugars of the lignocellulosic biomass. Research is

Fostering integrity in postgraduate research: an evidence-based policy and support framework.

Science.gov (United States)

Mahmud, Saadia; Bretag, Tracey

2014-01-01

Postgraduate research students have a unique position in the debate on integrity in research as students and novice researchers. To assess how far policies for integrity in postgraduate research meet the needs of students as "research trainees," we reviewed online policies for integrity in postgraduate research at nine particular Australian universities against the Australian Code for Responsible Conduct of Research (the Code) and the five core elements of exemplary academic integrity policy identified by Bretag et al. (2011 ), i.e., access, approach, responsibility, detail, and support. We found inconsistency with the Code in the definition of research misconduct and a lack of adequate detail and support. Based on our analysis, previous research, and the literature, we propose a framework for policy and support for postgraduate research that encompasses a consistent and educative approach to integrity maintained across the university at all levels of scholarship and for all stakeholders.

Planning for an Integrated Research Experiment

International Nuclear Information System (INIS)

Barnard, J.J.; Ahle, L.E.; Bangerter, R.O.; Bieniosek, F.M.; Celata, C.M.; Faltens, A.; Friedman, A.; Grote, D.P.; Haber, I.; Henestroza, E.; Kishek, R.A.; Hoon, M.J.L. de; Karpenko, V.P.; Kwan, J.W.; Lee, E.P.; Logan, B.G.; Lund, S.M.; Meier, W.R.; Molvik, A.W.; Sangster, T.C.; Seidl, P.A.; Sharp, W.M.

2000-01-01

The authors describe the goals and research program leading to the Heavy Ion Integrated Research Experiment (IRE). They review the basic constraints which lead to a design and give examples of parameters and capabilities of an IRE. We also show design tradeoffs generated by the systems code IBEAM. A multi-pronged Phase 1 research effort is laying the groundwork for the Integrated Research Experiment. Experiment, technology development, theory, simulation, and systems studies are all playing major roles in this Phase I research. The key research areas are: (1) Source and injector (for investigation of a high brightness, multiple beam, low cost injector); (2) High current transport (to examine effects at full driver-scale line charge density, including the maximization of the beam filling-factor and control of electrons); (3) Enabling technology development (low cost and high performance magnetic core material, superconducting magnetic quadrupole arrays, insulators, and pulsers); and (4) Beam simulations and theory (for investigations of beam matching, specification of accelerator errors, studies of emittance growth, halo, and bunch compression, in the accelerator, and neutralization methods, stripping effects, spot size minimization in the chamber); and (5) Systems optimization (minimization of cost and maximization of pulse energy and beam intensity). They have begun the process of designing, simulating, and optimizing the next major heavy-ion induction accelerator, the IRE. This accelerator facility will, in turn, help provide the basis to proceed to the next step in the development of IFE as an attractive source of fusion energy

Integration of clinical research documentation in electronic health records.

Science.gov (United States)

Broach, Debra

2015-04-01

Clinical trials of investigational drugs and devices are often conducted within healthcare facilities concurrently with clinical care. With implementation of electronic health records, new communication methods are required to notify nonresearch clinicians of research participation. This article reviews clinical research source documentation, the electronic health record and the medical record, areas in which the research record and electronic health record overlap, and implications for the research nurse coordinator in documentation of the care of the patient/subject. Incorporation of clinical research documentation in the electronic health record will lead to a more complete patient/subject medical record in compliance with both research and medical records regulations. A literature search provided little information about the inclusion of clinical research documentation within the electronic health record. Although regulations and guidelines define both source documentation and the medical record, integration of research documentation in the electronic health record is not clearly defined. At minimum, the signed informed consent(s), investigational drug or device usage, and research team contact information should be documented within the electronic health record. Institutional policies should define a standardized process for this integration in the absence federal guidance. Nurses coordinating clinical trials are in an ideal position to define this integration.

Barriers to Implementing Treatment Integrity Procedures in School Psychology Research: Survey of Treatment Outcome Researchers

Science.gov (United States)

Sanetti, Lisa M. Hagermoser; DiGennaro Reed, Florence D.

2012-01-01

Treatment integrity data are essential to drawing valid conclusions in treatment outcome studies. Such data, however, are not always included in peer-reviewed research articles in school psychology or related fields. To gain a better understanding of why treatment integrity data are lacking in the school psychology research, we surveyed the…

Centrifugal partition chromatography in a biorefinery context: Separation of monosaccharides from hydrolysed sugar beet pulp.

Science.gov (United States)

Ward, David P; Cárdenas-Fernández, Max; Hewitson, Peter; Ignatova, Svetlana; Lye, Gary J

2015-09-11

A critical step in the bioprocessing of sustainable biomass feedstocks, such as sugar beet pulp (SBP), is the isolation of the component sugars from the hydrolysed polysaccharides. This facilitates their subsequent conversion into higher value chemicals and pharmaceutical intermediates. Separation methodologies such as centrifugal partition chromatography (CPC) offer an alternative to traditional resin-based chromatographic techniques for multicomponent sugar separations. Highly polar two-phase systems containing ethanol and aqueous ammonium sulphate are examined here for the separation of monosaccharides present in hydrolysed SBP pectin: l-rhamnose, l-arabinose, d-galactose and d-galacturonic acid. Dimethyl sulfoxide (DMSO) was selected as an effective phase system modifier improving monosaccharide separation. The best phase system identified was ethanol:DMSO:aqueous ammonium sulphate (300gL(-1)) (0.8:0.1:1.8, v:v:v) which enabled separation of the SBP monosaccharides by CPC (200mL column) in ascending mode (upper phase as mobile phase) with a mobile phase flow rate of 8mLmin(-1). A mixture containing all four monosaccharides (1.08g total sugars) in the proportions found in hydrolysed SBP was separated into three main fractions; a pure l-rhamnose fraction (>90%), a mixed l-arabinose/d-galactose fraction and a pure d-galacturonic acid fraction (>90%). The separation took less than 2h demonstrating that CPC is a promising technique for the separation of these sugars with potential for application within an integrated, whole crop biorefinery. Copyright © 2015 The Authors. Published by Elsevier B.V. All rights reserved.

Research Integrity and Research Ethics in Professional Codes of Ethics: Survey of Terminology Used by Professional Organizations across Research Disciplines.

Science.gov (United States)

Komić, Dubravka; Marušić, Stjepan Ljudevit; Marušić, Ana

2015-01-01

Professional codes of ethics are social contracts among members of a professional group, which aim to instigate, encourage and nurture ethical behaviour and prevent professional misconduct, including research and publication. Despite the existence of codes of ethics, research misconduct remains a serious problem. A survey of codes of ethics from 795 professional organizations from the Illinois Institute of Technology's Codes of Ethics Collection showed that 182 of them (23%) used research integrity and research ethics terminology in their codes, with differences across disciplines: while the terminology was common in professional organizations in social sciences (82%), mental health (71%), sciences (61%), other organizations had no statements (construction trades, fraternal social organizations, real estate) or a few of them (management, media, engineering). A subsample of 158 professional organizations we judged to be directly involved in research significantly more often had statements on research integrity/ethics terminology than the whole sample: an average of 10.4% of organizations with a statement (95% CI = 10.4-23-5%) on any of the 27 research integrity/ethics terms compared to 3.3% (95% CI = 2.1-4.6%), respectively (Porganizations should define research integrity and research ethics issues in their ethics codes and collaborate within and across disciplines to adequately address responsible conduct of research and meet contemporary needs of their communities.

Building Technologies Research and Integration Center (BTRIC)

Data.gov (United States)

Federal Laboratory Consortium — The Building Technologies Research and Integration Center (BTRIC), in the Energy and Transportation Science Division (ETSD) of Oak Ridge National Laboratory (ORNL),...

Assessing microalgae biorefinery routes for the production of biofuels via hydrothermal liquefaction.

Science.gov (United States)

López Barreiro, Diego; Samorì, Chiara; Terranella, Giuseppe; Hornung, Ursel; Kruse, Andrea; Prins, Wolter

2014-12-01

The interest in third generation biofuels from microalgae has been rising during the past years. Meanwhile, it seems not economically feasible to grow algae just for biofuels. Co-products with a higher value should be produced by extracting a particular algae fraction to improve the economics of an algae biorefinery. The present study aims at analyzing the influence of two main microalgae components (lipids and proteins) on the composition and quantity of biocrude oil obtained via hydrothermal liquefaction of two strains (Nannochloropsis gaditana and Scenedesmus almeriensis). The algae were liquefied as raw biomass, after extracting lipids and after extracting proteins in microautoclave experiments at different temperatures (300-375°C) for 5 and 15min. The results indicate that extracting the proteins from the microalgae prior to HTL may be interesting to improve the economics of the process while at the same time reducing the nitrogen content of the biocrude oil. Copyright © 2014 Elsevier Ltd. All rights reserved.

Nitrous Oxide Abatement Coupled with Biopolymer Production As a Model GHG Biorefinery for Cost-Effective Climate Change Mitigation.

Science.gov (United States)

Frutos, Osvaldo D; Cortes, Irene; Cantera, Sara; Arnaiz, Esther; Lebrero, Raquel; Muñoz, Raúl

2017-06-06

N 2 O represents ∼6% of the global greenhouse gas emission inventory and the most important O 3 -depleting substance emitted in this 21st century. Despite its environmental relevance, little attention has been given to cost-effective and environmentally friendly N 2 O abatement methods. Here we examined, the potential of a bubble column (BCR) and an internal loop airlift (ALR) bioreactors of 2.3 L for the abatement of N 2 O from a nitric acid plant emission. The process was based on the biological reduction of N 2 O by Paracoccus denitrificans using methanol as a carbon/electron source. Two nitrogen limiting strategies were also tested for the coproduction of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) coupled with N 2 O reduction. High N 2 O removal efficiencies (REs) (≈87%) together with a low PHBV cell accumulation were observed in both bioreactors in excess of nitrogen. However, PHBV contents of 38-64% were recorded under N limiting conditions along with N 2 O-REs of ≈57% and ≈84% in the ALR and BCR, respectively. Fluorescence in situ hybridization analyses showed that P. denitrificans was dominant (>50%) after 6 months of experimentation. The successful abatement of N 2 O concomitant with PHBV accumulation confirmed the potential of integrating biorefinery concepts into biological gas treatment for a cost-effective GHG mitigation.

Pretreatment of eucalyptus with recycled ionic liquids for low-cost biorefinery.

Science.gov (United States)

Xu, Jikun; Liu, Bingchuan; Hou, Huijie; Hu, Jingping

2017-06-01

It is urgent to develop recycled ionic liquids (ILs) as green solvents for sustainable biomass pretreatment. The goal of this study is to explore the availability and performance of reusing 1-allyl-3-methylimidazolium chloride ([amim]Cl) and 1-butyl-3-methylimidazolium acetate ([bmim]OAc) for pretreatment, structural evolution, and enzymatic hydrolysis of eucalyptus. Cellulose enzymatic digestibility slightly decreased with the increased number of pretreatment recycles. The hydrolysis efficiencies of eucalyptus pretreated via 4th recycled ILs were 54.3% for [amim]Cl and 72.8% for [bmim]OAc, which were 5.0 and 6.7-folds higher than that of untreated eucalyptus. Deteriorations of ILs were observed by the relatively lower sugar conversion and lignin removal from eucalyptus after 4th reuse. No appreciable changes in fundamental framework and thermal stability of [amim]Cl were observed even after successive pretreatments, whereas the anionic structure of [bmim]OAc was destroyed or replaced. This study suggested that the biomass pretreatment with recycled ILs was a potential alternative for low-cost biorefinery. Copyright © 2017 Elsevier Ltd. All rights reserved.

The Integrated Multi-Level Bilingual Teaching of "Social Research Methods"

Science.gov (United States)

Zhu, Yanhan; Ye, Jian

2012-01-01

"Social Research Methods," as a methodology course, combines theories and practices closely. Based on the synergy theory, this paper tries to establish an integrated multi-level bilingual teaching mode. Starting from the transformation of teaching concepts, we should integrate interactions, experiences, and researches together and focus…

Research Integrity and Research Ethics in Professional Codes of Ethics: Survey of Terminology Used by Professional Organizations across Research Disciplines

Science.gov (United States)

Komić, Dubravka; Marušić, Stjepan Ljudevit; Marušić, Ana

2015-01-01

Professional codes of ethics are social contracts among members of a professional group, which aim to instigate, encourage and nurture ethical behaviour and prevent professional misconduct, including research and publication. Despite the existence of codes of ethics, research misconduct remains a serious problem. A survey of codes of ethics from 795 professional organizations from the Illinois Institute of Technology’s Codes of Ethics Collection showed that 182 of them (23%) used research integrity and research ethics terminology in their codes, with differences across disciplines: while the terminology was common in professional organizations in social sciences (82%), mental health (71%), sciences (61%), other organizations had no statements (construction trades, fraternal social organizations, real estate) or a few of them (management, media, engineering). A subsample of 158 professional organizations we judged to be directly involved in research significantly more often had statements on research integrity/ethics terminology than the whole sample: an average of 10.4% of organizations with a statement (95% CI = 10.4-23-5%) on any of the 27 research integrity/ethics terms compared to 3.3% (95% CI = 2.1–4.6%), respectively (Pethics concepts used prescriptive language in describing the standard of practice. Professional organizations should define research integrity and research ethics issues in their ethics codes and collaborate within and across disciplines to adequately address responsible conduct of research and meet contemporary needs of their communities. PMID:26192805

Using Action Research Projects to Examine Teacher Technology Integration Practices

Science.gov (United States)

Dawson, Kara

2012-01-01

This study examined the technology integration practices of teachers involved in a statewide initiative via one cycle of action research. It differs from other studies of teacher technology integration practices because it simultaneously involved and provided direct benefits to teachers and researchers. The study used thematic analysis to provide…

Biomass to levulinic acid: A techno-economic analysis and sustainability of biorefinery processes in Southeast Asia.

Science.gov (United States)

Isoni, V; Kumbang, D; Sharratt, P N; Khoo, H H

2018-05-15

Aligned with Singapore's commitment to sustainable development and investment in renewable resources, cleaner energy and technology (Sustainable Singapore Blueprint), we report a techno-economic analysis of the biorefinery process in Southeast Asia. The considerations in this study provide an overview of the current and future challenges in the biomass-to-chemical processes with life-cycle thinking, linking the land used for agriculture and biomass to the levulinic acid production. 7-8 kg of lignocellulosic feedstock (glucan content 30-35 wt%) from agriculture residues empty fruit bunches (EFB) or rice straw (RS) can be processed to yield 1 kg of levulinic acid. Comparisons of both traditional and "green" alternative solvents and separation techniques for the chemical process were modelled and their relative energy profiles evaluated. Using 2-methyltetrahydrofuran (2-MeTHF) as the process solvent showed to approx. 20 fold less energy demand compared to methyl isobutyl ketone (MIBK) or approx. 180 fold less energy demand compared to direct distillation from aqueous stream. Greenhouse gases emissions of the major operations throughout the supply chain (energy and solvent use, transport, field emissions) were estimated and compared against the impact of deforestation to make space for agriculture purposes. A biorefinery process for the production of 20 ktonne/year of levulinic acid from two different types of lignocellulosic feedstock was hypothesized for different scenarios. In one scenario the chemical plant producing levulinic acid was located in Singapore whereas in other scenarios, its location was placed in a neighboring country, closer to the biomass source. Results from this study show the importance of feedstock choices, as well as the associated plant locations, in the quest for sustainability objectives. Copyright © 2018 Elsevier Ltd. All rights reserved.

Science and Society: Integrity and honesty in research

CERN Multimedia

2003-01-01

Results that contradict known physics, data manipulated, lack of vigilance by co-authors, failures in the system for scientific publication... Last September a US Committee of Enquiry unveiled one of the most serious frauds in the history of physics. Over a two year period, a young researcher at Bell Laboratories had published a large number of articles with exciting results for solid state physics, but which, alas, were fraudulent! Obviously a fraud of this magnitude is exceptional. However, it did serve to focus attention on the problem of integrity and honesty in research practices. This subject, crucial to the well-being and credibility of scientific research, will be the central theme of the lecture given by Nicholas Steneck, Professor of History at the University of Michigan. A leading expert on this issue, on which he has published extensively, he is a consultant to the Office of Research Integrity in the US, and has been closely involved in public policy-making in relation to questions of research int...

Supply Chain Management and Sustainability: Procrastinating Integration in Mainstream Research

Directory of Open Access Journals (Sweden)

Marisa P. de Brito

2010-03-01

Full Text Available Research has pointed out opportunities and research agendas to integrate sustainability issues with supply chain and operations management. However, we find that it is still not mainstream practice to systematically take a sustainability approach in tackling supply chain and operations management issues. In this paper, we make use of behavioral theory to explain the current lack of integration. We conclude through abductive reasoning that the reasons for procrastinating integration of sustainability in supply chain and operations management research are the conflicting nature of the task and the inherent context, which is the focus on operations rather than environmental or social issues.

Undergraduate courses with an integral research year

International Nuclear Information System (INIS)

Clough, A S; Regan, P H

2003-01-01

We present the details of the four year MPhys undergraduate degree provided by the University of Surrey. Integral to this course is a full year spent on a research placement, which in most cases takes place external to the university at a North American or European research centre. This paper outlines the basic rationale underlying the course and, by including a number of research student profiles, we discuss the triple benefits of this course for the students, the University of Surrey and the host institutions where the students spend their research year

TEAM 1 Integrated Research Partnerships for Malaria Control ...

International Development Research Centre (IDRC) Digital Library (Canada)

IDRC CRDI

TEAM 1 Integrated Research Partnerships for Malaria Control through an Ecohealth Approach in. East Africa. Abstract: Representing East Africa, the National Institute for Medical Research (NIMR, Tanzania), icipe, the. Kigali Health Institute (Rwanda) and the Kamuli local government district authority in Uganda form.

The Role of Integrated Knowledge Translation in Intervention Research.

Science.gov (United States)

Wathen, C Nadine; MacMillan, Harriet L

2018-04-01

There is widespread recognition across the full range of applied research disciplines, including health and social services, about the challenges of integrating scientifically derived research evidence into policy and/or practice decisions. These "disconnects" or "knowledge-practice gaps" between research production and use have spawned a new research field, most commonly known as either "implementation science" or "knowledge translation." The present paper will review key concepts in this area, with a particular focus on "integrated knowledge translation" (IKT)-which focuses on researcher-knowledge user partnership-in the area of mental health and prevention of violence against women and children using case examples from completed and ongoing work. A key distinction is made between the practice of KT (disseminating, communicating, etc.), and the science of KT, i.e., research regarding effective KT approaches. We conclude with a discussion of the relevance of IKT for mental health intervention research with children and adolescents.

Where's the LGBT in integrated care research? A systematic review.

Science.gov (United States)

Hughes, Rachel L; Damin, Catherine; Heiden-Rootes, Katie

2017-09-01

Lesbian, gay, bisexual, and transgender (LGBT) individuals experience more negative health outcomes compared with their heterosexual peers. The health disparities are often related to family and social rejection of the LGBT individuals. Integrated care, and Medical Family Therapy in particular, may aid in addressing the systemic nature of the negative health outcomes. To better understand the current state of the integrated care literature on addressing the health needs of LGBT individuals, a systematic review of the research literature was conducted from January 2000 to January 2016 for articles including integrated health care interventions for LGBT populations. Independent reviewers coded identified articles. Only 8 research articles met criteria for inclusion out of the 2,553 initially identified articles in the search. Results indicated a lack of integrated care research on health care and health needs of LGBT individuals, and none of the articles addressed the use of family or systemic-level interventions. Implications for future research and the need for better education training are discussed. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

From Landscape Research to Landscape Planning : Aspects of Integration, Education and Application

NARCIS (Netherlands)

Tress, B.; Tress, G.; Fry, G.; Opdam, P.F.M.

2006-01-01

Research policy favours projects that integrate disciplinary knowledge and involve non-academic stakeholders. Consequently, integrative concepts - interdisciplinarity and transdisciplinarity - are gaining currency in landscape research and planning. Researchers are excited by the prospect of merging

Rethinking global health research: towards integrative expertise

Directory of Open Access Journals (Sweden)

MacLachlan Malcolm

2009-07-01

Full Text Available Abstract The Bamako Call for Action on Research for Health stresses the importance of inter-disciplinary, inter-ministerial and inter-sectoral working. This challenges much of our current research and postgraduate research training in health, which mostly seeks to produce narrowly focused content specialists. We now need to compliment this type of research and research training, by offering alternative pathways that seek to create expertise, not only in specific narrow content areas, but also in the process and context of research, as well as in the interaction of these different facets of knowledge. Such an approach, developing 'integrative expertise', could greatly facilitate better research utilisation, helping policy makers and practitioners work through more evidence-based practice and across traditional research boundaries.

Development and Piloting of Sustainability Assessment Metrics for Arctic Process Industry in Finland—The Biorefinery Investment and Slag Processing Service Cases

Directory of Open Access Journals (Sweden)

Roope Husgafvel

2017-09-01

Full Text Available Regionally, there has been a lot of focus on the advancement of sustainable arctic industry and circular economy activities within process industry in the Finnish Lapland. In this study, collaboration between university and industry was established facilitated by regional development actors to develop and pilot test a sustainability assessment approach taking into account previous work in this field. The industry partners in this study were a biorefinery investment in the first case and a slag processing service in the second case. As a result of the joint efforts, novel sets of environmental and economic sustainability assessment indicators and associated sub-indicators were developed and the existing set of social indicators was updated. Moreover, environmental and social sustainability assessments were implemented in the biorefinery case accompanied by a separate evaluation of regional economic impacts. In the slag processing case, environmental, economic and social sustainability were assessed. The results of the sustainability assessments indicated very good level of overall performance in both cases. However, specific elements that contributed to lower level of performance included lack of specific sustainability management and reporting approaches and need for better performance in supply chain sustainability, monitoring of greenhouse gas emissions, life cycle thinking and circular economy training. The expected effects of the planned investment on the regional economy were very positive based on the results of the evaluation.

Reviving the carbohydrate economy via multi-product lignocellulose biorefineries.

Science.gov (United States)

Zhang, Y-H Percival

2008-05-01

Before the industrial revolution, the global economy was largely based on living carbon from plants. Now the economy is mainly dependent on fossil fuels (dead carbon). Biomass is the only sustainable bioresource that can provide sufficient transportation fuels and renewable materials at the same time. Cellulosic ethanol production from less costly and most abundant lignocellulose is confronted with three main obstacles: (1) high processing costs (dollars /gallon of ethanol), (2) huge capital investment (dollars approximately 4-10/gallon of annual ethanol production capacity), and (3) a narrow margin between feedstock and product prices. Both lignocellulose fractionation technology and effective co-utilization of acetic acid, lignin and hemicellulose will be vital to the realization of profitable lignocellulose biorefineries, since co-product revenues would increase the margin up to 6.2-fold, where all purified lignocellulose co-components have higher selling prices (> approximately 1.0/kg) than ethanol ( approximately 0.5/kg of ethanol). Isolation of large amounts of lignocellulose components through lignocellulose fractionation would stimulate R&D in lignin and hemicellulose applications, as well as promote new markets for lignin- and hemicellulose-derivative products. Lignocellulose resource would be sufficient to replace significant fractionations (e.g., 30%) of transportation fuels through liquid biofuels, internal combustion engines in the short term, and would provide 100% transportation fuels by sugar-hydrogen-fuel cell systems in the long term.

Can We Integrate Qualitative and Quantitative Research in Science Education?

Science.gov (United States)

Niaz, Mansoor

The main objective of this paper is to emphasize the importance of integrating qualitative and quantitative research methodologies in science education. It is argued that the Kuhnian in commensurability thesis (a major source of inspiration for qualitative researchers) represents an obstacle for this integration. A major thesis of the paper is that qualitative researchers have interpreted the increased popularity of their paradigm (research programme) as a revolutionary break through in the Kuhnian sense. A review of the literature in areas relevant to science education shows that researchers are far from advocating qualitative research as the only methodology. It is concluded that competition between divergent approaches to research in science education (cf. Lakatos, 1970) would provide a better forum for a productive sharing of research experiences.

Pretreatment and Fractionation of Wheat Straw for Production of Fuel Ethanol and Value-added Co-products in a Biorefinery

Directory of Open Access Journals (Sweden)

Xiu Zhang

2014-08-01

Full Text Available An integrated process has been developed for a wheat straw biorefinery. In this process, wheat straw was pretreated by soaking in aqueous ammonia (SAA, which extensively removed lignin but preserved high percentages of the carbohydrate fractions for subsequent bioconversion. The pretreatment conditions included 15 wt% NH4OH, 1:10 solid:liquid ratio, 65 oC and 15 hours. Under these conditions, 48% of the original lignin was removed, whereas 98%, 83% and 78% of the original glucan, xylan, and arabinan, respectively, were preserved. The pretreated material was subsequently hydrolyzed with a commercial hemicellulase to produce a solution rich in xylose and low in glucose plus a cellulose-enriched solid residue. The xylose-rich solution then was used for production of value-added products. Xylitol and astaxanthin were selected to demonstrate the fermentability of the xylose-rich hydrolysate. Candida mogii and Phaffia rhodozyma were used for xylitol and astaxanthin fermentation, respectively. The cellulose-enriched residue obtained after the enzymatic hydrolysis of the pretreated straw was used for ethanol production in a fed-batch simultaneous saccharification and fermentation (SSF process. In this process, a commercial cellulase was used for hydrolysis of the glucan in the residue and Saccharomyces cerevisiae, which is the most efficient commercial ethanol-producing organism, was used for ethanol production. Final ethanol concentration of 57 g/l was obtained at 27 wt% total solid loading.

Integrative Mental Health (IMH): paradigm, research, and clinical practice.

Science.gov (United States)

Lake, James; Helgason, Chanel; Sarris, Jerome

2012-01-01

This paper provides an overview of the rapidly evolving paradigm of "Integrative Mental Health (IMH)." The paradigm of contemporary biomedical psychiatry and its contrast to non-allopathic systems of medicine is initially reviewed, followed by an exploration of the emerging paradigm of IMH, which aims to reconcile the bio-psycho-socio-spiritual model with evidence-based methods from traditional healing practices. IMH is rapidly transforming conventional understandings of mental illness and has significant positive implications for the day-to-day practice of mental health care. IMH incorporates mainstream interventions such as pharmacologic treatments, psychotherapy, and psychosocial interventions, as well as alternative therapies such as acupuncture, herbal and nutritional medicine, dietary modification, meditation, etc. Two recent international conferences in Europe and the United States show that interest in integrative mental health care is growing rapidly. In response, the International Network of Integrative Mental Health (INIMH: www.INIMH.org) was established in 2010 with the objective of creating an international network of clinicians, researchers, and public health advocates to advance a global agenda for research, education, and clinical practice of evidence-based integrative mental health care. The paper concludes with a discussion of emerging opportunities for research in IMH, and an exploration of potential clinical applications of integrative mental health care. Copyright © 2012 Elsevier Inc. All rights reserved.

Status of integrated multidisciplinary rotorcraft optimization research at the Langley Research Center

Science.gov (United States)

Mantay, Wayne R.; Adelman, Howard M.

1990-01-01

This paper describes a joint NASA/Army research activity at the Langley Research Center to develop optimization procedures aimed at improving the rotor blade design process by integrating appropriate disciplines and accounting for important interactions among the disciplines. The activity is being guided by a Steering Committee made up of key NASA and Army researchers and managers. The paper describes the optimization formulation in terms of the objective function, design variables, and constraints. The analysis aspects are discussed, and the interdisciplinary interactions are defined in terms of the information that must be transferred among disciplinary analyses as well as the trade-offs between disciplines in determining the details of the design. At this writing, some significant progress has been made. Results given in the paper represent accomplishments in rotor aerodynamic performance optimization for minimum horsepower, rotor dynamic optimization for vibration reduction, approximate analysis of frequencies and mode shapes, rotor structural optimization for minimum weight, and integrated aerodynamic load/dynamics optimization for minimum vibration and weight.

[Research on medical instrument information integration technology based on IHE PCD].

Science.gov (United States)

Zheng, Jianli; Liao, Yun; Yang, Yongyong

2014-06-01

Integrating medical instruments with medical information systems becomes more and more important in healthcare industry. To make medical instruments without standard communication interface possess the capability of interoperating and sharing information with medical information systems, we developed a medical instrument integration gateway based on Integrating the Healthcare Enterprise Patient Care Device (IHE PCD) integration profiles in this research. The core component is an integration engine which is implemented according to integration profiles and Health Level Seven (HL7) messages defined in IHE PCD. Working with instrument specific Javascripts, the engine transforms medical instrument data into HL7 ORU message. This research enables medical instruments to interoperate and exchange medical data with information systems in a standardized way, and is valuable for medical instrument integration, especially for traditional instruments.

The GEOSS solution for enabling data interoperability and integrative research.

Science.gov (United States)

Nativi, Stefano; Mazzetti, Paolo; Craglia, Max; Pirrone, Nicola

2014-03-01

Global sustainability research requires an integrative research effort underpinned by digital infrastructures (systems) able to harness data and heterogeneous information across disciplines. Digital data and information sharing across systems and applications is achieved by implementing interoperability: a property of a product or system to work with other products or systems, present or future. There are at least three main interoperability challenges a digital infrastructure must address: technological, semantic, and organizational. In recent years, important international programs and initiatives are focusing on such an ambitious objective. This manuscript presents and combines the studies and the experiences carried out by three relevant projects, focusing on the heavy metal domain: Global Mercury Observation System, Global Earth Observation System of Systems (GEOSS), and INSPIRE. This research work recognized a valuable interoperability service bus (i.e., a set of standards models, interfaces, and good practices) proposed to characterize the integrative research cyber-infrastructure of the heavy metal research community. In the paper, the GEOSS common infrastructure is discussed implementing a multidisciplinary and participatory research infrastructure, introducing a possible roadmap for the heavy metal pollution research community to join GEOSS as a new Group on Earth Observation community of practice and develop a research infrastructure for carrying out integrative research in its specific domain.

GHG sustainability compliance of rapeseed-based biofuels produced in a Danish multi-output biorefinery system

DEFF Research Database (Denmark)

Boldrin, Alessio; Astrup, Thomas Fruergaard

2015-01-01

.g. the European Renewable Energy Directive, RED). The provided calculation methods, however, leave room for interpretation regarding methodological choices, which could significantly affect the resulting emission factors. In this study, GHG reduction factors for a range of biofuels produced in a Danish...... biorefinery system were determined using five different emission allocation principles. The results show that emission savings ranged from -34 % to 71 %, indicating the need for a better definition of regulatory calculation principles. The calculated emission factors differed significantly from default values...... provided in the literature, suggesting that case-specific local conditions should be taken into consideration. A more holistic LCA-based approach proved useful in overcoming some of the issues inherent in the regulatory allocation principles. On this basis, indirect land use change (ILUC) emissions were...

European Research Reloaded : Cooperation and Integration Among Europeanized States

NARCIS (Netherlands)

Holzhacker, Ron; Haverland, Markus

2006-01-01

European integration has had an ever deepening impact on the member states. The first wave of research concerned the process of institution building and policy developments at the European Union (EU) level. The second wave, on Europeanization used the resulting integration as an explanatory factor

A Methodology for Conducting Integrative Mixed Methods Research and Data Analyses

Science.gov (United States)

Castro, Felipe González; Kellison, Joshua G.; Boyd, Stephen J.; Kopak, Albert

2011-01-01

Mixed methods research has gained visibility within the last few years, although limitations persist regarding the scientific caliber of certain mixed methods research designs and methods. The need exists for rigorous mixed methods designs that integrate various data analytic procedures for a seamless transfer of evidence across qualitative and quantitative modalities. Such designs can offer the strength of confirmatory results drawn from quantitative multivariate analyses, along with “deep structure” explanatory descriptions as drawn from qualitative analyses. This article presents evidence generated from over a decade of pilot research in developing an integrative mixed methods methodology. It presents a conceptual framework and methodological and data analytic procedures for conducting mixed methods research studies, and it also presents illustrative examples from the authors' ongoing integrative mixed methods research studies. PMID:22167325

CLARA: an integrated clinical research administration system

Science.gov (United States)

Bian, Jiang; Xie, Mengjun; Hogan, William; Hutchins, Laura; Topaloglu, Umit; Lane, Cheryl; Holland, Jennifer; Wells, Thomas

2014-01-01

Administration of human subject research is complex, involving not only the institutional review board but also many other regulatory and compliance entities within a research enterprise. Its efficiency has a direct and substantial impact on the conduct and management of clinical research. In this paper, we report on the Clinical Research Administration (CLARA) platform developed at the University of Arkansas for Medical Sciences. CLARA is a comprehensive web-based system that can streamline research administrative tasks such as submissions, reviews, and approval processes for both investigators and different review committees on a single integrated platform. CLARA not only helps investigators to meet regulatory requirements but also provides tools for managing other clinical research activities including budgeting, contracting, and participant schedule planning. PMID:24778201

The Future of Nearshore Processes Research: U.S. Integrated Coastal Research Program

Science.gov (United States)

Elko, N.; Feddersen, F.; Foster, D. L.; Hapke, C. J.; Holman, R. A.; McNinch, J.; Mulligan, R. P.; Ozkan-Haller, H. T.; Plant, N. G.; Raubenheimer, B.

2016-02-01

The authors, representing the acting Nearshore Advisory Council, have developed an implementation plan for a U.S. Nearshore Research Program based on the 2015 Future of Nearshore Processes report that was authored by the nearshore community. The objectives of the plan are to link research programs across federal agencies, NGOs, industry, and academia into an integrated national program and to increase academic and NGO participation in federal agency nearshore processes research. A primary recommendation is interagency collaboration to build a research program that will coordinate and fund U.S. nearshore processes research across three broad research themes: 1) long-term coastal evolution due to natural and anthropogenic processes; 2) extreme events; and 3) physical, biological and chemical processes impacting human and ecosystem health. The plan calls for a new program to be developed by an executive committee of federal agency leaders, NGOs, and an academic representative, created similarly to the existing NOPP program. This leadership will be established prior to the 2016 Ocean Sciences meeting and will have agreed on responsibilities and a schedule for development of the research program. To begin to understand the scope of today's U.S. coastal research investment, a survey was distributed to ten federal agency R&D program heads. Six of the ten agencies indicated that they fund coastal research, with a combined annual coastal research budget of nearly 100 million (NSF has not responded). The priority of the three research themes were ranked nearly equally and potential research support ranged from 15-19 million for each theme, with approximately 12 million as direct contribution to academic research. Beyond addressing our fundamental science questions, it is critical that the nearshore community stay organized to represent academic interests on the new executive committee. The program goal is the integration of academic, NGO, and federal agencies.

Emerging biorefinery technologies for Indian forest industry to reduce GHG emissions.

Science.gov (United States)

Sharma, Naman; Nainwal, Shubham; Jain, Shivani; Jain, Siddharth

2015-11-01

The production of biofuels as alternative energy source over fossil fuels has gained immense interest over the years as it can contribute significantly to reduce the greenhouse gas (GHG) emissions from energy production and utilization. Also with rapidly increasing fuel price and fall in oil wells, the present scenario forces us to look for an alternative source of energy that will help us in the operation of industrial as well as the transportation sector. The pulp mills in India are one of the many options. The pulp mills in India can help us to produce bio-fuels by thermo-chemical/biochemical conversion of black liquor and wood residues. These technologies include extraction of hemi-cellulose from wooden chips and black liquor, lignin from black liquor, methanol from evaporator condensates, biogas production from waste sludge, syngas production from biomass using gasification and bio-oil production from biomass using pyrolysis. The objective of this paper is to overview these emerging bio-refinery technologies that can be implemented in Indian Forest Industry to get bio-fuels, bio-chemicals and bio-energy to reduce GHG emissions. Copyright © 2015 Elsevier Inc. All rights reserved.

Metabolic engineering of Corynebacterium glutamicum for fermentative production of chemicals in biorefinery.

Science.gov (United States)

Baritugo, Kei-Anne; Kim, Hee Taek; David, Yokimiko; Choi, Jong-Il; Hong, Soon Ho; Jeong, Ki Jun; Choi, Jong Hyun; Joo, Jeong Chan; Park, Si Jae

2018-05-01

Bio-based production of industrially important chemicals provides an eco-friendly alternative to current petrochemical-based processes. Because of the limited supply of fossil fuel reserves, various technologies utilizing microbial host strains for the sustainable production of platform chemicals from renewable biomass have been developed. Corynebacterium glutamicum is a non-pathogenic industrial microbial species traditionally used for L-glutamate and L-lysine production. It is a promising species for industrial production of bio-based chemicals because of its flexible metabolism that allows the utilization of a broad spectrum of carbon sources and the production of various amino acids. Classical breeding, systems, synthetic biology, and metabolic engineering approaches have been used to improve its applications, ranging from traditional amino-acid production to modern biorefinery systems for production of value-added platform chemicals. This review describes recent advances in the development of genetic engineering tools and techniques for the establishment and optimization of metabolic pathways for bio-based production of major C2-C6 platform chemicals using recombinant C. glutamicum.

Variation in the Interpretation of Scientific Integrity in Community-based Participatory Health Research

Science.gov (United States)

Kraemer Diaz, Anne E.; Spears Johnson, Chaya R.; Arcury, Thomas A.

2013-01-01

Community-based participatory research (CBPR) has become essential in health disparities and environmental justice research; however, the scientific integrity of CBPR projects has become a concern. Some concerns, such as appropriate research training, lack of access to resources and finances, have been discussed as possibly limiting the scientific integrity of a project. Prior to understanding what threatens scientific integrity in CBPR, it is vital to understand what scientific integrity means for the professional and community investigators who are involved in CBPR. This analysis explores the interpretation of scientific integrity in CBPR among 74 professional and community research team members from of 25 CBPR projects in nine states in the southeastern United States in 2012. It describes the basic definition for scientific integrity and then explores variations in the interpretation of scientific integrity in CBPR. Variations in the interpretations were associated with team member identity as professional or community investigators. Professional investigators understood scientific integrity in CBPR as either conceptually or logistically flexible, as challenging to balance with community needs, or no different than traditional scientific integrity. Community investigators interpret other factors as important in scientific integrity, such as trust, accountability, and overall benefit to the community. This research demonstrates that the variations in the interpretation of scientific integrity in CBPR call for a new definition of scientific integrity in CBPR that takes into account the understanding and needs of all investigators. PMID:24161098

Brazilian Science and Research Integrity: Where are We? What Next?

Directory of Open Access Journals (Sweden)

Sonia M.R. Vasconcelos

2015-06-01

Full Text Available Building a world-class scientific community requires first-class ingredients at many different levels: funding, training, management, international collaborations, creativity, ethics, and an understanding of research integrity practices. All over the world, addressing these practices has been high on the science policy agenda of major research systems. Universities have a central role in fostering a culture of research integrity, which has posed additional challenges for faculty, students and administrators - but also opportunities. In Brazil, the leading universities and governmental funding agencies are collaborating on this project, but much remains to be done.

Brazilian Science and Research Integrity: Where are We? What Next?

Science.gov (United States)

Vasconcelos, Sonia M R; Sorenson, Martha M; Watanabe, Edson H; Foguel, Debora; Palácios, Marisa

2015-01-01

Building a world-class scientific community requires first-class ingredients at many different levels: funding, training, management, international collaborations, creativity, ethics, and an understanding of research integrity practices. All over the world, addressing these practices has been high on the science policy agenda of major research systems. Universities have a central role in fostering a culture of research integrity, which has posed additional challenges for faculty, students and administrators - but also opportunities. In Brazil, the leading universities and governmental funding agencies are collaborating on this project, but much remains to be done.

Statistical Methodologies to Integrate Experimental and Computational Research

Science.gov (United States)

Parker, P. A.; Johnson, R. T.; Montgomery, D. C.

2008-01-01

Development of advanced algorithms for simulating engine flow paths requires the integration of fundamental experiments with the validation of enhanced mathematical models. In this paper, we provide an overview of statistical methods to strategically and efficiently conduct experiments and computational model refinement. Moreover, the integration of experimental and computational research efforts is emphasized. With a statistical engineering perspective, scientific and engineering expertise is combined with statistical sciences to gain deeper insights into experimental phenomenon and code development performance; supporting the overall research objectives. The particular statistical methods discussed are design of experiments, response surface methodology, and uncertainty analysis and planning. Their application is illustrated with a coaxial free jet experiment and a turbulence model refinement investigation. Our goal is to provide an overview, focusing on concepts rather than practice, to demonstrate the benefits of using statistical methods in research and development, thereby encouraging their broader and more systematic application.

Leading Integrated Health and Social Care Systems: Perspectives from Research and Practice.

Science.gov (United States)

Evans, Jenna M; Daub, Stacey; Goldhar, Jodeme; Wojtak, Anne; Purbhoo, Dipti

2016-01-01

As the research evidence on integrated care has evolved over the past two decades, so too has the critical role leaders have for the implementation, effectiveness and sustainability of integrated care. This paper explores what it means to be an effective leader of integrated care initiatives by drawing from the experiences of a leadership team in implementing an award-winning integrated care program in Toronto, Canada. Lessons learned are described and assessed against existing theory and research to identify which skills and behaviours facilitate effective leadership of integrated care initiatives.

Economic Risk Assessment of Early Stage Designs for Glycerol2Valorization in Biorefinery Concepts

DEFF Research Database (Denmark)

Loureiro da Costa Lira Gargalo, Carina; Cheali, Peam; Posada, John A.

2016-01-01

, and discount rate, among others, have high impact on the project’s profitability analysis. Therefore, the profitability was tested under uncertainties by using NPV and MSP as economic metrics. The robust ranking of solutions is presented with respect to minimum economic risk of the project being nonprofitable...... (failure to achieve a positive NPV times the consequential profit loss). It was found that the best potential options for glycerol valorization is through the production of either (i) lactic acid (9 MM$ with 63% probability of failure to achieve a positive NPV); (ii) succinic acid (14 MM$ with 76......%); or finally, (iii) 1,2-propanediol (16 MM$ with 68%). As a risk reduction strategy, a multiproduct biorefinery is suggested which is capable of switching between the production of lactic acid and succinic acid. This solution comes with increased capital investment; however, it leads to more robust NPV...

From agro-industrial wastes to single cell oils: a step towards prospective biorefinery.

Science.gov (United States)

Diwan, Batul; Parkhey, Piyush; Gupta, Pratima

2018-04-23

The reserves of fossil-based fuels, which currently seem sufficient to meet the global demands, is inevitably on the verge of exhaustion. Contemporary raw material for alternate fuel like biodiesel is usually edible plant commodity oils, whose increasing public consumption rate raises the need of finding a non-edible and fungible alternate oil source. In this quest, single cell oils (SCO) from oleaginous yeasts and fungi can provide a sustainable alternate of not only functional but also valuable (polyunsaturated fatty acids (PUFA)-rich) lipids. Researches are been increasingly driven towards increasing the SCO yield in order to realize its commercial importance. However, bulk requirement of expensive synthetic carbon substrate, which inflates the overall SCO production cost, is the major limitation towards complete acceptance of this technology. Even though substrate cost minimization could make the SCO production profitable is uncertain, it is still essential to identify suitable cheap and abundant substrates in an attempt to potentially reduce the overall process economy. One of the most sought-after in-expensive carbon reservoirs, agro-industrial wastes, can be an attractive replacement to expensive synthetic carbon substrates in this regard. The present review assess these possibilities referring to the current experimental investigations on oleaginous yeasts, and fungi reported for conversion of agro-industrial feedstocks into triacylglycerols (TAGs) and PUFA-rich lipids. Multiple associated factors regulating lipid accumulation utilizing such substrates and impeding challenges has been analyzed. The review infers that production of bulk oil in combination to high-value fatty acids, co-production strategies for SCO and different microbial metabolites, and reutilization and value addition to spent wastes could possibly leverage the high operating costs and help in commencing a successful biorefinery. Rigorous research is nevertheless required whether it is

Psychotherapy, psychopathology, research and practice: pathways of connections and integration.

Science.gov (United States)

Castonguay, Louis G

2011-03-01

This paper describes three pathways of connections between different communities of knowledge seekers: integration of psychotherapeutic approaches, integration of psychotherapy and psychopathology, and integration of science and practice. Some of the issues discussed involve the delineation and investigation of common factors (e.g., principles of change), improvement of major forms of psychotherapy, clinical implications of psychopathology research, as well as current and future directions related to practice-research networks. The aim of this paper is to suggest that building bridges across theoretical orientations, scientific fields, professional experiences, and epistemological views may be a fruitful strategy to improve our understanding and the impact of psychotherapy.

Integration Research for Shaping Sustainable Regional Landscapes

Directory of Open Access Journals (Sweden)

David J. Brunckhorst

2005-01-01

Full Text Available Ecological and social systems are complex and entwined. Complex social-ecological systems interact in a multitude of ways at many spatial scales across time. Their interactions can contribute both positive and negative consequences in terms of sustainability and the context in which they exist affecting future landscape change. Non-metropolitan landscapes are the major theatre of interactions where large-scale alteration occurs precipitated by local to global forces of economic, social, and environmental change. Such regional landscape effects are critical also to local natural resource and social sustainability. The institutions contributing pressures and responses consequently shape future landscapes and in turn influence how social systems, resource users, governments, and policy makers perceive those landscapes and their future. Science and policy for “sustainable” futures need to be integrated at the applied “on-ground” level where products and effects of system interactions are fully included, even if unobserved. Government agencies and funding bodies often consider such research as “high-risk.” This paper provides some examples of interdisciplinary research that has provided a level of holistic integration through close engagement with landholders and communities or through deliberately implementing integrative and innovative on-ground experimental models. In retrospect, such projects have to some degree integrated through spatial (if not temporal synthesis, policy analysis, and (new or changed institutional arrangements that are relevant locally and acceptable in business, as well as at broader levels of government and geography. This has provided transferable outcomes that can contribute real options and adaptive capacity for suitable positive futures.

Research Integrity and Peer Review-past highlights and future directions.

Science.gov (United States)

Boughton, Stephanie L; Kowalczuk, Maria K; Meerpohl, Joerg J; Wager, Elizabeth; Moylan, Elizabeth C

2018-01-01

In May 2016, we launched Research Integrity and Peer Review , an international, open access journal with fully open peer review (reviewers are identified on their reports and named reports are published alongside the article) to provide a home for research on research and publication ethics, research reporting, and research on peer review. As the journal enters its third year, we reflect on recent events and highlights for the journal and explore how the journal is faring in terms of gender and diversity in peer review. We also share the particular interests of our Editors-in-Chief regarding models of peer review, reporting quality, common research integrity issues that arise during the publishing process, and how people interact with the published literature. We continue to encourage further research into peer review, research and publication ethics and research reporting, as we believe that all new initiatives should be evidence-based. We also remain open to constructive discussions of the developments in the field that offer new solutions.

Fusion Ignition Research Experiment System Integration

International Nuclear Information System (INIS)

Brown, T.

1999-01-01

The FIRE (Fusion Ignition Research Experiment) configuration has been designed to meet the physics objectives and subsystem requirements in an arrangement that allows remote maintenance of in-vessel components and hands-on maintenance of components outside the TF (toroidal-field) boundary. The general arrangement consists of sixteen wedged-shaped TF coils that surround a free-standing central solenoid (CS), a double-wall vacuum vessel and internal plasma-facing components. A center tie rod is used to help support the vertical magnetic loads and a compression ring is used to maintain wedge pressure in the inboard corners of the TF coils. The magnets are liquid nitrogen cooled and the entire device is surrounded by a thermal enclosure. The double-wall vacuum vessel integrates cooling and shielding in a shape that maximizes shielding of ex-vessel components. The FIRE configuration development and integration process has evolved from an early stage of concept selection to a higher level of machine definition and component details. This paper describes the status of the configuration development and the integration of the major subsystem components

Production of biofuels and biomolecules in the framework of circular economy: A regional case study.

Science.gov (United States)

Jacquet, Nicolas; Haubruge, Eric; Richel, Aurore

2015-12-01

Faced to the economic and energetic context of our society, it is widely recognised that an alternative to fossil fuels and oil-based products will be needed in the nearest future. In this way, development of urban biorefinery could bring many solutions to this problem. Study of the implementation of urban biorefinery highlights two sustainable configurations that provide solutions to the Walloon context by promoting niche markets, developing circular economy and reducing transport of supply feedstock. First, autonomous urban biorefineries are proposed, which use biological waste for the production of added value molecules and/or finished products and are energetically self-sufficient. Second, integrated urban biorefineries, which benefit from an energy supply from a nearby industrial activity. In the Walloon economic context, these types of urban biorefineries could provide solutions by promoting niche markets, developing a circular economy model, optimise the transport of supply feedstock and contribute to the sustainable development. © The Author(s) 2015.

Scale Up of Malonic Acid Fermentation Process: Cooperative Research and Development Final Report, CRADA Number CRD-16-612

Energy Technology Data Exchange (ETDEWEB)

Schell, Daniel J [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2018-04-16

The goal of this work is to use the large fermentation vessels in the National Renewable Energy Laboratory's (NREL) Integrated Biorefinery Research Facility (IBRF) to scale-up Lygos' biological-based process for producing malonic acid and to generate performance data. Initially, work at the 1 L scale validated successful transfer of Lygos' fermentation protocols to NREL using a glucose substrate. Outside of the scope of the CRADA with NREL, Lygos tested their process on lignocellulosic sugars produced by NREL at Lawrence Berkeley National Laboratory's (LBNL) Advanced Biofuels Process Development Unit (ABPDU). NREL produced these cellulosic sugar solutions from corn stover using a separate cellulose/hemicellulose process configuration. Finally, NREL performed fermentations using glucose in large fermentors (1,500- and 9,000-L vessels) to intermediate product and to demonstrate successful performance of Lygos' technology at larger scales.

Integrity of the marriage and family therapy research literature: perceptions and recommendations.

Science.gov (United States)

Brock, Gregory W; Whiting, Jason B; Matern, Brianne; Fife, Stephen T

2009-04-01

Reports of falsification, fabrication, plagiarism, and other violations of research integrity across the sciences are on the increase. Joining with other disciplines to actively protect the integrity of the marriage and family therapy (MFT) research literature is of utmost importance to both the discipline and the future of the profession. To inform the issues raised, results are presented of an informal survey among MFT clinical members on their perceptions about the literature together with their preferences for how best to protect its integrity. This article initiates an important discussion about the honesty of MFT research.

Fractionation of bamboo culms by autohydrolysis, organosolv delignification and extended delignification: understanding the fundamental chemistry of the lignin during the integrated process.

Science.gov (United States)

Wen, Jia-Long; Sun, Shao-Ni; Yuan, Tong-Qi; Xu, Feng; Sun, Run-Cang

2013-12-01

Bamboo (Phyllostachys pubescens) was successfully fractionated using a three-step integrated process: (1) autohydrolysis pretreatment facilitating xylooligosaccharide (XOS) production (2) organosolv delignification with organic acids to obtain high-purity lignin, and (3) extended delignification with alkaline hydrogen peroxide (AHP) to produce purified pulp. The integrated process was comprehensively evaluated by component analysis, SEM, XRD, and CP-MAS NMR techniques. Emphatically, the fundamental chemistry of the lignin fragments obtained from the integrated process was thoroughly investigated by gel permeation chromatography and solution-state NMR techniques (quantitative (13)C, 2D-HSQC, and (31)P-NMR spectroscopies). It is believed that the integrated process facilitate the production of XOS, high-purity lignin, and purified pulp. Moreover, the enhanced understanding of structural features and chemical reactivity of lignin polymers will maximize their utilizations in a future biorefinery industry. Copyright © 2013 Elsevier Ltd. All rights reserved.

An overview of integrated flight-propulsion controls flight research on the NASA F-15 research airplane

Science.gov (United States)

Burcham, Frank W., Jr.; Gatlin, Donald H.; Stewart, James F.

1995-01-01

The NASA Dryden Flight Research Center has been conducting integrated flight-propulsion control flight research using the NASA F-15 airplane for the past 12 years. The research began with the digital electronic engine control (DEEC) project, followed by the F100 Engine Model Derivative (EMD). HIDEC (Highly Integrated Digital Electronic Control) became the umbrella name for a series of experiments including: the Advanced Digital Engine Controls System (ADECS), a twin jet acoustics flight experiment, self-repairing flight control system (SRFCS), performance-seeking control (PSC), and propulsion controlled aircraft (PCA). The upcoming F-15 project is ACTIVE (Advanced Control Technology for Integrated Vehicles). This paper provides a brief summary of these activities and provides background for the PCA and PSC papers, and includes a bibliography of all papers and reports from the NASA F-15 project.

A conceptual lignocellulosic 'feed+fuel' biorefinery and its application to the linked biofuel and cattle raising industries in Brazil

International Nuclear Information System (INIS)

Mathews, John A.; Tan Hao; Moore, Michael J.B.; Bell, Geoff

2011-01-01

It has been argued by some that the substitution of biofuels for gasoline could increase greenhouse gas (GHG) emissions, rather than reduce them. The increase is attributed to the indirect land use change effects of planting new grain and corn crops around the world to replace those progressively being devoted to ethanol production. In this paper, indirect effects are minimised by allowing land to be used for both food and fuel, rather than for one or the other. We present a sugarcane 'feed+fuel' biorefinery, which produces bioethanol and yeast biomass, a source of single-cell protein (SCP), that can be used as a high-protein animal feed supplement. The yeast SCP can partially substitute for grass in the feed of cattle grazing on pasture and thereby potentially release land for increased sugarcane production, with minimal land use change effects. Applying the concept conservatively to the Brazilian ethanol and livestock industry our model demonstrates that it would be technically feasible to raise ethanol production threefold from the current level of 27 GL to over 92 GL. The extra ethanol would meet biofuel market mandates in the US without bringing any extra land into agricultural or pastoral use. The analysis demonstrates a viable way to increase biofuel and food production by linking two value chains as called for by industrial ecology studies. - Highlights: → A proposed sugarcane 'feed+fuel' biorefinery producing bioethanol and yeast. → Yeast used as a high-protein animal feed supplement. → In cattle grazing, yeast substitutes for grass to release land for biomass production. → In Brazil our model demonstrates ethanol production raised threefold.

Integrating Research Competencies in Massage Therapy Education.

Science.gov (United States)

Hymel, Glenn M.

The massage therapy profession is currently engaged in a competency-based education movement that includes an emphasis on promoting massage therapy research competencies (MTRCs). A systems-based model for integrating MTRCs into massage therapy education was therefore proposed. The model and an accompanying checklist describe an approach to…

Methods in Entrepreneurship Education Research: A Review and Integrative Framework

DEFF Research Database (Denmark)

Blenker, Per; Trolle Elmholdt, Stine; Frederiksen, Signe Hedeboe

2014-01-01

is fragmented both conceptually and methodologically. Findings suggest that the methods applied in entrepreneurship education research cluster in two groups: 1. quantitative studies of the extent and effect of entrepreneurship education, and 2. qualitative single case studies of different courses and programmes....... It integrates qualitative and quantitative techniques, the use of research teams consisting of insiders (teachers studying their own teaching) and outsiders (research collaborators studying the education) as well as multiple types of data. To gain both in-depth and analytically generalizable studies...... a variety of helpful methods, explore the potential relation between insiders and outsiders in the research process, and discuss how different types of data can be combined. The integrated framework urges researchers to extend investments in methodological efforts and to enhance the in-depth understanding...

Perceptions That Influence the Maintenance of Scientific Integrity in Community-Based Participatory Research

Science.gov (United States)

Kraemer Diaz, Anne E.; Spears Johnson, Chaya R.; Arcury, Thomas A.

2015-01-01

Scientific integrity is necessary for strong science; yet many variables can influence scientific integrity. In traditional research, some common threats are the pressure to publish, competition for funds, and career advancement. Community-based participatory research (CBPR) provides a different context for scientific integrity with additional and…

Integrated modelling of ecosystem services and energy systems research

Science.gov (United States)

Agarwala, Matthew; Lovett, Andrew; Bateman, Ian; Day, Brett; Agnolucci, Paolo; Ziv, Guy

2016-04-01

The UK Government is formally committed to reducing carbon emissions and protecting and improving natural capital and the environment. However, actually delivering on these objectives requires an integrated approach to addressing two parallel challenges: de-carbonising future energy system pathways; and safeguarding natural capital to ensure the continued flow of ecosystem services. Although both emphasise benefiting from natural resources, efforts to connect natural capital and energy systems research have been limited, meaning opportunities to improve management of natural resources and meet society's energy needs could be missed. The ecosystem services paradigm provides a consistent conceptual framework that applies in multiple disciplines across the natural and economic sciences, and facilitates collaboration between them. At the forefront of the field, integrated ecosystem service - economy models have guided public- and private-sector decision making at all levels. Models vary in sophistication from simple spreadsheet tools to complex software packages integrating biophysical, GIS and economic models and draw upon many fields, including ecology, hydrology, geography, systems theory, economics and the social sciences. They also differ in their ability to value changes in natural capital and ecosystem services at various spatial and temporal scales. Despite these differences, current models share a common feature: their treatment of energy systems is superficial at best. In contrast, energy systems research has no widely adopted, unifying conceptual framework that organises thinking about key system components and interactions. Instead, the literature is organised around modelling approaches, including life cycle analyses, econometric investigations, linear programming and computable general equilibrium models. However, some consistencies do emerge. First, often contain a linear set of steps, from exploration to resource supply, fuel processing, conversion

Quantifying complexity in translational research: an integrated approach.

Science.gov (United States)

Munoz, David A; Nembhard, Harriet Black; Kraschnewski, Jennifer L

2014-01-01

The purpose of this paper is to quantify complexity in translational research. The impact of major operational steps and technical requirements is calculated with respect to their ability to accelerate moving new discoveries into clinical practice. A three-phase integrated quality function deployment (QFD) and analytic hierarchy process (AHP) method was used to quantify complexity in translational research. A case study in obesity was used to usability. Generally, the evidence generated was valuable for understanding various components in translational research. Particularly, the authors found that collaboration networks, multidisciplinary team capacity and community engagement are crucial for translating new discoveries into practice. As the method is mainly based on subjective opinion, some argue that the results may be biased. However, a consistency ratio is calculated and used as a guide to subjectivity. Alternatively, a larger sample may be incorporated to reduce bias. The integrated QFD-AHP framework provides evidence that could be helpful to generate agreement, develop guidelines, allocate resources wisely, identify benchmarks and enhance collaboration among similar projects. Current conceptual models in translational research provide little or no clue to assess complexity. The proposed method aimed to fill this gap. Additionally, the literature review includes various features that have not been explored in translational research.

Leading with integrity: a qualitative research study.

Science.gov (United States)

Storr, Loma

2004-01-01

This research paper gives an account of a study into the relationship between leadership and integrity. There is a critical analysis of the current literature for effective, successful and ethical leadership particularly, integrity. The purpose and aim of this paper is to build on the current notions of leadership within the literature, debate contemporary approaches, focussing specifically on practices within the UK National Health Service in the early 21st century. This leads to a discussion of the literature on ethical leadership theory, which includes public service values, ethical relationships and leading with integrity. A small study was undertaken consisting of 18 interviews with leaders and managers within a District General HospitaL Using the Repertory Grid technique and analysis 15 themes emerged from the constructs elicited, which were compared to the literature for leadership and integrity and other studies. As well as finding areas of overlap, a number of additional constructs were elicited which suggested that effective leadership correlates with integrity and the presence of integrity will improve organisational effectiveness. The study identified that perceptions of leadership character and behaviour are used to judge the effectiveness and integrity of a leader. However, the ethical implications and consequences of leaders' scope of power and influence such as policy and strategy are somewhat neglected and lacking in debate. The findings suggest that leaders are not judged according to the ethical nature of decision making, and leading and managing complex change but that the importance of integrity and ethical leadership correlated with higher levels of hierarchical status and that it is assumed by virtue of status and success that leaders lead with integrity. Finally, the findings of this study seem to suggest that nurse leadership capability is developing as a consequence of recent national investment.

Considerations for future education in integrative landscape research

NARCIS (Netherlands)

Tress, G.; Tress, B.; Fry, G.; Opdam, P.F.M.; Ahern, J.F.; Antrop, M.; Hartig, T.; Hobbs, R.; Miller, D.; Silbernagel, J.M.; Winder, N.

2006-01-01

This chapter discusses challenges for PhD students involved in integrative landscape research. These challenges include terminology, epistemology, expectations, stakeholder involvement, organizational barriers, communicating and publishing, as well as career development. The chapter presents

A Triangular Approach to Integrate Research, Education and Practice in Higher Engineering Education

Science.gov (United States)

Heikkinen, Eetu-Pekka; Jaako, Juha; Hiltunen, Jukka

2017-01-01

Separate approaches in engineering education, research and practice are not very useful when preparing students for working life; instead, integration of education, research and industrial practices is needed. A triangular approach (TA) as a method to accomplish this integration and as a method to provide students with integrated expertise is…

Integrating Ecological and Social Knowledge: Learning from CHANS Research

Directory of Open Access Journals (Sweden)

Bruce Shindler

2017-03-01

Full Text Available Scientists are increasingly called upon to integrate across ecological and social disciplines to tackle complex coupled human and natural system (CHANS problems. Integration of these disciplines is challenging and many scientists do not have experience with large integrated research projects. However, much can be learned about the complicated process of integration from such efforts. We document some of these lessons from a National Science Foundation-funded CHANS project (Forests, People, Fire and present considerations for developing and engaging in coupled human and natural system projects. Certainly we are not the first to undertake this endeavor, and many of our findings complement those of other research teams. We focus here on the process of coming together, learning to work as an integrated science team, and describe the challenges and opportunities of engaging stakeholders (agency personnel and citizen communities of interests in our efforts. Throughout this project our intention was to foster dialogue among diverse interests and, thus, incorporate this knowledge into uncovering primary social and ecological drivers of change. A primary tool was an agent-based model, Envision, that used this information in landscape simulation, visualization models, and scenario development. Although integration can be an end in itself, the proof of value in the approach can be the degree to which it provides new insights or tools to CHANS, including closer interaction among multiple stakeholders, that could not have been reached without it.