WorldWideScience

Sample records for integrated assessment scenarios

  1. Methods for Developing Emissions Scenarios for Integrated Assessment Models

    Energy Technology Data Exchange (ETDEWEB)

    Prinn, Ronald [MIT; Webster, Mort [MIT

    2007-08-20

    The overall objective of this research was to contribute data and methods to support the future development of new emissions scenarios for integrated assessment of climate change. Specifically, this research had two main objectives: 1. Use historical data on economic growth and energy efficiency changes, and develop probability density functions (PDFs) for the appropriate parameters for two or three commonly used integrated assessment models. 2. Using the parameter distributions developed through the first task and previous work, we will develop methods of designing multi-gas emission scenarios that usefully span the joint uncertainty space in a small number of scenarios. Results on the autonomous energy efficiency improvement (AEEI) parameter are summarized, an uncertainty analysis of elasticities of substitution is described, and the probabilistic emissions scenario approach is presented.

  2. Methodology to translate policy assessment problems into scenarios: the example of the SEAMLESS integrated framework

    NARCIS (Netherlands)

    Therond, O.; Belhouchette, H.; Janssen, S.J.C.; Louhichi, K.; Ewert, F.; Bergez, J.E.; Wery, J.; Heckelei, T.; Olsson, J.A.; Leenhardt, D.; Ittersum, van M.K.

    2009-01-01

    Scenario-based approaches in environmental and policy assessment studies are increasingly applied within integrated assessment and modelling frameworks. The SEAMLESS project develops such an integrated framework (SEAMLESS-IF) aiming to assess, ex-ante, impacts of alternative agro-environmental

  3. Integrative Scenario Development

    Directory of Open Access Journals (Sweden)

    Joerg A. Priess

    2014-03-01

    Full Text Available Scenarios are employed to address a large number of future environmental and socioeconomic challenges. We present a conceptual framework for the development of scenarios to integrate the objectives of different stakeholder groups. Based on the framework, land-use scenarios were developed to provide a common base for further research. At the same time, these scenarios assisted regional stakeholders to bring forward their concerns and arrive at a shared understanding of challenges between scientific and regional stakeholders, which allowed them to eventually support regional decision making. The focus on the integration of views and knowledge domains of different stakeholder groups, such as scientists and practitioners, required rigorous and repeated measures of quality control. The application of the integrative concept provided products for both stakeholder groups, and the process of scenario development facilitated cooperation and learning within both the scientist and practitioner groups as well as between the two groups.

  4. Participatory scenario development for integrated assessment of nutrient flows in a Catalan river catchment

    Directory of Open Access Journals (Sweden)

    F. Caille

    2007-11-01

    Full Text Available Rivers in developed regions are under significant stress due to nutrient enrichment generated mainly by human activities. Excess nitrogen and phosphorus emissions are the product of complex dynamic systems influenced by various factors such as demographic, socio-economic and technological development. Using a Catalan river catchment, La Tordera (North-East of Spain, as a case study of an integrated and interdisciplinary environmental assessment of nutrient flows, we present and discuss the development of narrative socio-economic scenarios through a participatory process for the sustainable management of the anthropogenic sources of nutrients, nitrogen and phosphorus. In this context, scenarios are an appropriate tool to assist nutrient emissions modelling, and to assess impacts, possible pathways for socio-economic development and associated uncertainties. Evaluated against the 1993–2003 baseline period, scenarios target the 2030 horizon, i.e. through the implementation process of the Water Framework Directive (Directive 2000/60/EC. After a critical examination of the methodology used in the participatory development of socio-economic scenarios, we present four possible futures (or perspectives for the Catalan river catchment conceived by stakeholders invited to a workshop. Keys to the success of such a participatory process were trust, which enhanced openness, and disagreements, which fostered the group's creativity for scenario development. The translation of narrative socio-economic scenarios into meaningful nutrient emission scenarios is also discussed. By integrating findings of natural sciences and socio-economic analysis, we aim to assist decision makers and stakeholders in evaluating optimal management strategies for the anthropogenic sources of nitrogen and phosphorus.

  5. Loose and Tight GNSS/INS Integrations: Comparison of Performance Assessed in Real Urban Scenarios.

    Science.gov (United States)

    Falco, Gianluca; Pini, Marco; Marucco, Gianluca

    2017-01-29

    Global Navigation Satellite Systems (GNSSs) remain the principal mean of positioning in many applications and systems, but in several types of environment, the performance of standalone receivers is degraded. Although many works show the benefits of the integration between GNSS and Inertial Navigation Systems (INSs), tightly-coupled architectures are mainly implemented in professional devices and are based on high-grade Inertial Measurement Units (IMUs). This paper investigates the performance improvements enabled by the tight integration, using low-cost sensors and a mass-market GNSS receiver. Performance is assessed through a series of tests carried out in real urban scenarios and is compared against commercial modules, operating in standalone mode or featuring loosely-coupled integrations. The paper describes the developed tight-integration algorithms with a terse mathematical model and assesses their efficacy from a practical perspective.

  6. Human health impacts for renewable energy scenarios from the EnerGEO Platform of Integrated Assessment (PIA)

    International Nuclear Information System (INIS)

    Lefevre, Mireille; Gschwind, Benoit; Blanc, Isabelle; Ranchin, Thierry; Cofala, Janusz; Fuss, Sabine

    2013-01-01

    This article reports impact results from running the EnerGEO Platform of Integrated Assessment (PIA) related to human health for different scenarios in Europe. The scenarios were prepared within the EnerGEO project. The idea of this European project is to determine how low carbon scenarios, and in particular scenarios with a high share of renewable energy, affect concentrations of air pollutants and as a consequence affect human health. PM 2.5 concentrations were estimated with the IIASA Greenhouse Gas and Air Pollution Interactions and Synergies (GAINS) model on a time horizon up to the year 2050 for different scenarios. We analyse here the estimation of the Loss of Life Expectancy due to PM 2.5 concentrations for the Baseline scenario taken as a reference and the Maximum renewable power scenario. (orig.)

  7. The EnerGEO Platform of Integrated Assessment (PIA). Environmental assessment of scenarios as a web service

    International Nuclear Information System (INIS)

    Blanc, Isabelle; Gschwind, Benoit; Lefevre, Mireille

    2013-01-01

    With the International Energy Agency estimating that global energy demand will increase between 40 and 50 percent by 2030 (compared to 2003), scientists and policymakers are concerned about the sustainability of the current energy system and what environmental pressures might result from the development of future energy systems. EnerGEO is an ongoing FP7 Project (2009-2013) which assesses the current and future impact of energy use on the environment by linking environmental observation systems with the processes involved in exploiting energy resources. The idea of this European project is to determine how low carbon scenarios, and in particular scenarios with a high share of renewable electricity, affect emissions of air pollutants and greenhouse gases (GHG) and contribute to mitigation of negative energy system impacts on human health and ecosystems. A Platform of Integrated Assessment (PIA) has been elaborated to provide impact results for a selection of scenarios via a set of models (large-scale energy models, Life Cycle Assessment models,..). This PIA is currently available through a web service. The concept of the PIA is detailed and to illustrate its interest, a set of results is given with the use of the simulation mode of the European version of GAINS for a selection of scenarios. (orig.)

  8. Decarbonizing the Global Economy - An Integrated Assessment of Low Carbon Emission Scenarios proposed in Climate Policy

    Science.gov (United States)

    Hokamp, Sascha; Khabbazan, Mohammad Mohammadi

    2017-04-01

    In 2015, the Conference of the Parties (COP 21) reaffirmed to targeting the global mean temperature rise below 2 °C in 2100 while finding no consent on decarbonizing the global economy, and instead, the final agreement called for enhanced scientific investigation of low carbon emission scenarios (UNFCC, 2015). In addition, the Climate Action Network International (CAN) proposes Special Reports to address decarbonization and low carbon development including 1.5 °C scenarios (IPCC, 2016). In response to these developments, we investigate whether the carbon emission cuts, in accordance with the recent climate policy proposals, may reach the climate target. To tackle this research question, we employ the coupled climate-energy-economy integrated assessment Model of INvestment and endogenous technological Development (MIND, cf. Edenhofer et al., 2005, Neubersch et al. 2014). Extending MIND's climate module to the two-box version used in the Dynamic Integrated model of Climate and the Economy (DICE, cf. Nordhaus and Sztorc, 2013, Nordhaus 2014), we perform a cost-effectiveness analysis with constraints on anthropogenic carbon emissions. We show that a climate policy scenario with early decarbonization complies with the 2° C climate target, even without Carbon Capturing and Storage (CCS) or negative emissions (see van Vuuren et al., 2013, for negative emissions). However, using emission inertia of 3.7 percent annually, reflecting the inflexibility on transforming the energy sector, we find a climate policy with moderately low emissions from 2100 onwards at a cost in terms of Balanced Growth Equivalents (BGE, cf. Anthoff and Tol, 2009) of 0.764 % that requires an early (2035 vs. 2120) peak of investments in renewable energy production compared to a business-as-usual scenario. Hence, decarbonizing the global economy and achieving the 2 °C target might still be possible before 2100, but the window of opportunity is beginning to close. References: Anthoff, D., and Tol, R

  9. Integrated environmental assessment of future energy scenarios based on economic equilibrium models

    International Nuclear Information System (INIS)

    Igos, E.; Rugani, B.; Rege, S.; Benetto, E.; Drouet, L.; Zachary, D.; Haas, T.

    2014-01-01

    The future evolution of energy supply technologies strongly depends on (and affects) the economic and environmental systems, due to the high dependency of this sector on the availability and cost of fossil fuels, especially on the small regional scale. This paper aims at presenting the modeling system and preliminary results of a research project conducted on the scale of Luxembourg to assess the environmental impact of future energy scenarios for the country, integrating outputs from partial and computable general equilibrium models within hybrid Life Cycle Assessment (LCA) frameworks. The general equilibrium model for Luxembourg, LUXGEM, is used to evaluate the economic impacts of policy decisions and other economic shocks over the time horizon 2006-2030. A techno-economic (partial equilibrium) model for Luxembourg, ETEM, is used instead to compute operation levels of various technologies to meet the demand for energy services at the least cost along the same timeline. The future energy demand and supply are made consistent by coupling ETEM with LUXGEM so as to have the same macro-economic variables and energy shares driving both models. The coupling results are then implemented within a set of Environmentally-Extended Input-Output (EE-IO) models in historical time series to test the feasibility of the integrated framework and then to assess the environmental impacts of the country. Accordingly, a dis-aggregated energy sector was built with the different ETEM technologies in the EE-IO to allow hybridization with Life Cycle Inventory (LCI) and enrich the process detail. The results show that the environmental impact slightly decreased overall from 2006 to 2009. Most of the impacts come from some imported commodities (natural gas, used to produce electricity, and metalliferous ores and metal scrap). The main energy production technology is the combined-cycle gas turbine plant 'Twinerg', representing almost 80% of the domestic electricity production in Luxembourg

  10. Proposals for enhanced health risk assessment and stratification in an integrated care scenario

    Science.gov (United States)

    Dueñas-Espín, Ivan; Vela, Emili; Pauws, Steffen; Bescos, Cristina; Cano, Isaac; Cleries, Montserrat; Contel, Joan Carles; de Manuel Keenoy, Esteban; Garcia-Aymerich, Judith; Gomez-Cabrero, David; Kaye, Rachelle; Lahr, Maarten M H; Lluch-Ariet, Magí; Moharra, Montserrat; Monterde, David; Mora, Joana; Nalin, Marco; Pavlickova, Andrea; Piera, Jordi; Ponce, Sara; Santaeugenia, Sebastià; Schonenberg, Helen; Störk, Stefan; Tegner, Jesper; Velickovski, Filip; Westerteicher, Christoph; Roca, Josep

    2016-01-01

    Objectives Population-based health risk assessment and stratification are considered highly relevant for large-scale implementation of integrated care by facilitating services design and case identification. The principal objective of the study was to analyse five health-risk assessment strategies and health indicators used in the five regions participating in the Advancing Care Coordination and Telehealth Deployment (ACT) programme (http://www.act-programme.eu). The second purpose was to elaborate on strategies toward enhanced health risk predictive modelling in the clinical scenario. Settings The five ACT regions: Scotland (UK), Basque Country (ES), Catalonia (ES), Lombardy (I) and Groningen (NL). Participants Responsible teams for regional data management in the five ACT regions. Primary and secondary outcome measures We characterised and compared risk assessment strategies among ACT regions by analysing operational health risk predictive modelling tools for population-based stratification, as well as available health indicators at regional level. The analysis of the risk assessment tool deployed in Catalonia in 2015 (GMAs, Adjusted Morbidity Groups) was used as a basis to propose how population-based analytics could contribute to clinical risk prediction. Results There was consensus on the need for a population health approach to generate health risk predictive modelling. However, this strategy was fully in place only in two ACT regions: Basque Country and Catalonia. We found marked differences among regions in health risk predictive modelling tools and health indicators, and identified key factors constraining their comparability. The research proposes means to overcome current limitations and the use of population-based health risk prediction for enhanced clinical risk assessment. Conclusions The results indicate the need for further efforts to improve both comparability and flexibility of current population-based health risk predictive modelling approaches

  11. Proposals for enhanced health risk assessment and stratification in an integrated care scenario.

    Science.gov (United States)

    Dueñas-Espín, Ivan; Vela, Emili; Pauws, Steffen; Bescos, Cristina; Cano, Isaac; Cleries, Montserrat; Contel, Joan Carles; de Manuel Keenoy, Esteban; Garcia-Aymerich, Judith; Gomez-Cabrero, David; Kaye, Rachelle; Lahr, Maarten M H; Lluch-Ariet, Magí; Moharra, Montserrat; Monterde, David; Mora, Joana; Nalin, Marco; Pavlickova, Andrea; Piera, Jordi; Ponce, Sara; Santaeugenia, Sebastià; Schonenberg, Helen; Störk, Stefan; Tegner, Jesper; Velickovski, Filip; Westerteicher, Christoph; Roca, Josep

    2016-04-15

    Population-based health risk assessment and stratification are considered highly relevant for large-scale implementation of integrated care by facilitating services design and case identification. The principal objective of the study was to analyse five health-risk assessment strategies and health indicators used in the five regions participating in the Advancing Care Coordination and Telehealth Deployment (ACT) programme (http://www.act-programme.eu). The second purpose was to elaborate on strategies toward enhanced health risk predictive modelling in the clinical scenario. The five ACT regions: Scotland (UK), Basque Country (ES), Catalonia (ES), Lombardy (I) and Groningen (NL). Responsible teams for regional data management in the five ACT regions. We characterised and compared risk assessment strategies among ACT regions by analysing operational health risk predictive modelling tools for population-based stratification, as well as available health indicators at regional level. The analysis of the risk assessment tool deployed in Catalonia in 2015 (GMAs, Adjusted Morbidity Groups) was used as a basis to propose how population-based analytics could contribute to clinical risk prediction. There was consensus on the need for a population health approach to generate health risk predictive modelling. However, this strategy was fully in place only in two ACT regions: Basque Country and Catalonia. We found marked differences among regions in health risk predictive modelling tools and health indicators, and identified key factors constraining their comparability. The research proposes means to overcome current limitations and the use of population-based health risk prediction for enhanced clinical risk assessment. The results indicate the need for further efforts to improve both comparability and flexibility of current population-based health risk predictive modelling approaches. Applicability and impact of the proposals for enhanced clinical risk assessment require

  12. A long-term, integrated impact assessment of alternative building energy code scenarios in China

    International Nuclear Information System (INIS)

    Yu, Sha; Eom, Jiyong; Evans, Meredydd; Clarke, Leon

    2014-01-01

    China is the second largest building energy user in the world, ranking first and third in residential and commercial energy consumption. Beginning in the early 1980s, the Chinese government has developed a variety of building energy codes to improve building energy efficiency and reduce total energy demand. This paper studies the impact of building energy codes on energy use and CO 2 emissions by using a detailed building energy model that represents four distinct climate zones each with three building types, nested in a long-term integrated assessment framework GCAM. An advanced building stock module, coupled with the building energy model, is developed to reflect the characteristics of future building stock and its interaction with the development of building energy codes in China. This paper also evaluates the impacts of building codes on building energy demand in the presence of economy-wide carbon policy. We find that building energy codes would reduce Chinese building energy use by 13–22% depending on building code scenarios, with a similar effect preserved even under the carbon policy. The impact of building energy codes shows regional and sectoral variation due to regionally differentiated responses of heating and cooling services to shell efficiency improvement. - Highlights: • We assessed long-term impacts of building codes and climate policy using GCAM. • Building energy codes would reduce Chinese building energy use by 13–22%. • The impacts of codes on building energy use vary by climate region and sub-sector

  13. An Integrated Hydro-Economic Modelling Framework to Evaluate Water Allocation Strategies II: Scenario Assessment

    NARCIS (Netherlands)

    George, B.; Malano, H.; Davidson, B.; Hellegers, P.J.G.J.; Bharati, L.; Sylvain, M.

    2011-01-01

    In this paper the results of an assessment of the hydrological and economic implications of reallocating water in the Musi sub-basin, a catchment within the Krishna Basin in India, are reported. Policy makers identified a number of different but plausible scenarios that could apply in the sub-basin,

  14. Integrated transportation scenario planning.

    Science.gov (United States)

    2010-07-01

    Regional land usetransportation scenario planning emerged as a planning technique in U.S. : metropolitan areas in the 1990s. Building on prior work by this research team, this study continues : to track the development and expansion of regional sc...

  15. Representative Agricultural Pathways and Scenarios for Regional Integrated Assessment of Climate Change Impacts, Vulnerability, and Adaptation. 5; Chapter

    Science.gov (United States)

    Valdivia, Roberto O.; Antle, John M.; Rosenzweig, Cynthia; Ruane, Alexander C.; Vervoort, Joost; Ashfaq, Muhammad; Hathie, Ibrahima; Tui, Sabine Homann-Kee; Mulwa, Richard; Nhemachena, Charles; hide

    2015-01-01

    The global change research community has recognized that new pathway and scenario concepts are needed to implement impact and vulnerability assessment where precise prediction is not possible, and also that these scenarios need to be logically consistent across local, regional, and global scales. For global climate models, representative concentration pathways (RCPs) have been developed that provide a range of time-series of atmospheric greenhouse-gas concentrations into the future. For impact and vulnerability assessment, new socio-economic pathway and scenario concepts have also been developed, with leadership from the Integrated Assessment Modeling Consortium (IAMC).This chapter presents concepts and methods for development of regional representative agricultural pathways (RAOs) and scenarios that can be used for agricultural model intercomparison, improvement, and impact assessment in a manner consistent with the new global pathways and scenarios. The development of agriculture-specific pathways and scenarios is motivated by the need for a protocol-based approach to climate impact, vulnerability, and adaptation assessment. Until now, the various global and regional models used for agricultural-impact assessment have been implemented with individualized scenarios using various data and model structures, often without transparent documentation, public availability, and consistency across disciplines. These practices have reduced the credibility of assessments, and also hampered the advancement of the science through model intercomparison, improvement, and synthesis of model results across studies. The recognition of the need for better coordination among the agricultural modeling community, including the development of standard reference scenarios with adequate agriculture-specific detail led to the creation of the Agricultural Model Intercomparison and Improvement Project (AgMIP) in 2010. The development of RAPs is one of the cross-cutting themes in AgMIP's work

  16. Economic assessment of energetic scenarios

    International Nuclear Information System (INIS)

    Grandjean, Alain; Bureau, Dominique; Schubert, Katheline; Henriet, Fanny; Maggiar, Nicolas; Criqui, Patrick; Le Teno, Helene; Baumstark, Luc; Crassous, Renaud; Roques, Fabien

    2013-09-01

    This publication gathers contributions proposed by different members of the Economic Council for a Sustainable Development (CEDD) on the issue of energy transition, and more precisely on scenarios elaborated with respect to energy transition. A first set of contributions addresses models of energy transition (assessment of scenario costs to reach a factor 4; the issue of de-carbonation of energy consumption; study of ELECsim, a tool to highlight costs of scenarios of evolution of the electric power system). The second part addresses arbitrations and choice assessment (the importance of social and economic impacts of scenarios; challenges related to the joint definition of the discount rate and of the evolution of carbon value in time; the issue of assessment of the integration of renewable energies into the power system)

  17. Proposals for enhanced health risk assessment and stratification in an integrated care scenario

    NARCIS (Netherlands)

    Duenas-Espin, Ivan; Vela, Emili; Pauws, Steffen; Bescos, Cristina; Cano, Isaac; Cleries, Montserrat; Carles Contel, Joan; de Manuel Keenoy, Esteban; Garcia-Aymerich, Judith; Gomez-Cabrero, David; Kaye, Rachelle; Lahr, Maarten M. H.; Lluch-Ariet, Magi; Moharra, Montserrat; Monterde, David; Mora, Joana; Nalin, Marco; Pavlickova, Andrea; Piera, Jordi; Ponce, Sara; Santaeugenia, Sebastia; Schonenberg, Helen; Stoerk, Stefan; Tegner, Jesper; Velickovski, Filip; Westerteicher, Christoph; Roca, Josep

    2016-01-01

    Objectives: Population-based health risk assessment and stratification are considered highly relevant for large-scale implementation of integrated care by facilitating services design and case identification. The principal objective of the study was to analyse five health-risk assessment strategies

  18. Proposals for enhanced health risk assessment and stratification in an integrated care scenario

    NARCIS (Netherlands)

    Dueñas-Espín, Ivan; Vela, Emili; Pauws, Steffen; Bescos, Cristina; Cano, Isaac; Cleries, Montserrat; Contel, Joan Carles; de Manuel Keenoy, Esteban; Garcia-Aymerich, Judith; Gomez-Cabrero, David; Kaye, Rachelle; Lahr, Maarten M H; Lluch-Ariet, Magí; Moharra, Montserrat; Monterde, David; Mora, Joana; Nalin, Marco; Pavlickova, Andrea; Piera, Jordi; Ponce, Sara; Santaeugenia, Sebastià; Schonenberg, Helen; Störk, Stefan; Tegner, Jesper; Velickovski, Filip; Westerteicher, Christoph; Roca, Josep

    2016-01-01

    OBJECTIVES: Population-based health risk assessment and stratification are considered highly relevant for large-scale implementation of integrated care by facilitating services design and case identification. The principal objective of the study was to analyse five health-risk assessment strategies

  19. Assessing the Energy and Emissions Implications of Alternative Population Scenarios Using a State-Level Integrated Assessment Model

    Science.gov (United States)

    Shi, W.; Nolte, C. G.; Loughlin, D. H.; Ou, Y.; Smith, S. J.

    2017-12-01

    We use GCAM-USA to examine the sensitivity of energy demands and resulting pollutant emissions and health impacts to differing population projections. The population projections are based on future fertility, mortality, migration and education assumptions consistent with the five Shared Socioeconomic Pathways (SSPs) (Jones and O'Neill, 2016). By using a state-level integrated assessment model, we capture the energy and emissions implications of population changes. Additionally, we overlay heating degree days and cooling degree days calculated from climate change projections to assess the individual and combined impacts of population shifts and climate change. A unique aspect of this work is the explicit representation of important regulatory drivers, such as the Cross-State Air Pollution Rule and vehicle efficiency standards. Preliminary results indicate there are significant differences across population scenarios in both U.S. national and state-level emissions. In this presentation, we will examine the influence of underlying factors such as climate, population, and technology changes on emissions and environmental impacts at 2050.

  20. Life cycle assessment of integrated waste management systems for alternative legacy scenarios of the London Olympic Park

    Energy Technology Data Exchange (ETDEWEB)

    Parkes, Olga, E-mail: o.parkes@ucl.ac.uk; Lettieri, Paola, E-mail: p.lettieri@ucl.ac.uk; Bogle, I. David L.

    2015-06-15

    Highlights: • Application of LCA in planning integrated waste management systems. • Environmental valuation of 3 legacy scenarios for the Olympic Park. • Hot-spot analysis highlights the importance of energy and materials recovery. • Most environmental savings are achieved through materials recycling. • Sensitivity analysis shows importance of waste composition and recycling rates. - Abstract: This paper presents the results of the life cycle assessment (LCA) of 10 integrated waste management systems (IWMSs) for 3 potential post-event site design scenarios of the London Olympic Park. The aim of the LCA study is to evaluate direct and indirect emissions resulting from various treatment options of municipal solid waste (MSW) annually generated on site together with avoided emissions resulting from energy, materials and nutrients recovery. IWMSs are modelled using GaBi v6.0 Product Sustainability software and results are presented based on the CML (v.Nov-10) characterisation method. The results show that IWMSs with advanced thermal treatment (ATT) and incineration with energy recovery have the lowest Global Warming Potential (GWP) than IWMSs where landfill is the primary waste treatment process. This is due to higher direct emissions and lower avoided emissions from the landfill process compared to the emissions from the thermal treatment processes. LCA results demonstrate that significant environmental savings are achieved through substitution of virgin materials with recycled ones. The results of the sensitivity analysis carried out for IWMS 1 shows that increasing recycling rate by 5%, 10% and 15% compared to the baseline scenario can reduce GWP by 8%, 17% and 25% respectively. Sensitivity analysis also shows how changes in waste composition affect the overall result of the system. The outcomes of such assessments provide decision-makers with fundamental information regarding the environmental impacts of different waste treatment options necessary for

  1. AgMIP Climate Data and Scenarios for Integrated Assessment. Chapter 3

    Science.gov (United States)

    Ruane, Alexander C.; Winter, Jonathan M.; McDermid, Sonali P.; Hudson, Nicholas I.

    2015-01-01

    Climate change presents a great challenge to the agricultural sector as changes in precipitation, temperature, humidity, and circulation patterns alter the climatic conditions upon which many agricultural systems rely. Projections of future climate conditions are inherently uncertain owing to a lack of clarity on how society will develop, policies that may be implemented to reduce greenhouse-gas (GHG) emissions, and complexities in modeling the atmosphere, ocean, land, cryosphere, and biosphere components of the climate system. Global climate models (GCMs) are based on well-established physics of each climate component that enable the models to project climate responses to changing GHG concentration scenarios (Stocker et al., 2013).The most recent iteration of the Coupled Model Intercomparison Project (CMIP5; Taylor et al., 2012) utilized representative concentration pathways (RCPs) to cover the range of plausible GHG concentrations out past the year 2100, with RCP8.5 representing an extreme scenario and RCP4.5 representing a lower concentrations scenario (Moss et al., 2010).

  2. Integrated life-cycle assessment of electricity-supply scenarios confirms global environmental benefit of low-carbon technologies.

    Science.gov (United States)

    Hertwich, Edgar G; Gibon, Thomas; Bouman, Evert A; Arvesen, Anders; Suh, Sangwon; Heath, Garvin A; Bergesen, Joseph D; Ramirez, Andrea; Vega, Mabel I; Shi, Lei

    2015-05-19

    Decarbonization of electricity generation can support climate-change mitigation and presents an opportunity to address pollution resulting from fossil-fuel combustion. Generally, renewable technologies require higher initial investments in infrastructure than fossil-based power systems. To assess the tradeoffs of increased up-front emissions and reduced operational emissions, we present, to our knowledge, the first global, integrated life-cycle assessment (LCA) of long-term, wide-scale implementation of electricity generation from renewable sources (i.e., photovoltaic and solar thermal, wind, and hydropower) and of carbon dioxide capture and storage for fossil power generation. We compare emissions causing particulate matter exposure, freshwater ecotoxicity, freshwater eutrophication, and climate change for the climate-change-mitigation (BLUE Map) and business-as-usual (Baseline) scenarios of the International Energy Agency up to 2050. We use a vintage stock model to conduct an LCA of newly installed capacity year-by-year for each region, thus accounting for changes in the energy mix used to manufacture future power plants. Under the Baseline scenario, emissions of air and water pollutants more than double whereas the low-carbon technologies introduced in the BLUE Map scenario allow a doubling of electricity supply while stabilizing or even reducing pollution. Material requirements per unit generation for low-carbon technologies can be higher than for conventional fossil generation: 11-40 times more copper for photovoltaic systems and 6-14 times more iron for wind power plants. However, only two years of current global copper and one year of iron production will suffice to build a low-carbon energy system capable of supplying the world's electricity needs in 2050.

  3. Climate change impact assessment on Veneto and Friuli plain groundwater. Part I: An integrated modeling approach for hazard scenario construction

    International Nuclear Information System (INIS)

    Baruffi, F.; Cisotto, A.; Cimolino, A.; Ferri, M.; Monego, M.; Norbiato, D.; Cappelletto, M.; Bisaglia, M.; Pretner, A.; Galli, A.; Scarinci, A.; Marsala, V.; Panelli, C.; Gualdi, S.; Bucchignani, E.; Torresan, S.; Pasini, S.; Critto, A.

    2012-01-01

    Climate change impacts on water resources, particularly groundwater, is a highly debated topic worldwide, triggering international attention and interest from both researchers and policy makers due to its relevant link with European water policy directives (e.g. 2000/60/EC and 2007/118/EC) and related environmental objectives. The understanding of long-term impacts of climate variability and change is therefore a key challenge in order to address effective protection measures and to implement sustainable management of water resources. This paper presents the modeling approach adopted within the Life + project TRUST (Tool for Regional-scale assessment of groUndwater Storage improvement in adaptation to climaTe change) in order to provide climate change hazard scenarios for the shallow groundwater of high Veneto and Friuli Plain, Northern Italy. Given the aim to evaluate potential impacts on water quantity and quality (e.g. groundwater level variation, decrease of water availability for irrigation, variations of nitrate infiltration processes), the modeling approach integrated an ensemble of climate, hydrologic and hydrogeologic models running from the global to the regional scale. Global and regional climate models and downscaling techniques were used to make climate simulations for the reference period 1961–1990 and the projection period 2010–2100. The simulation of the recent climate was performed using observed radiative forcings, whereas the projections have been done prescribing the radiative forcings according to the IPCC A1B emission scenario. The climate simulations and the downscaling, then, provided the precipitation, temperatures and evapo-transpiration fields used for the impact analysis. Based on downscaled climate projections, 3 reference scenarios for the period 2071–2100 (i.e. the driest, the wettest and the mild year) were selected and used to run a regional geomorphoclimatic and hydrogeological model. The final output of the model ensemble

  4. Climate change impact assessment on Veneto and Friuli plain groundwater. Part I: An integrated modeling approach for hazard scenario construction

    Energy Technology Data Exchange (ETDEWEB)

    Baruffi, F. [Autorita di Bacino dei Fiumi dell' Alto Adriatico, Cannaregio 4314, 30121 Venice (Italy); Cisotto, A., E-mail: segreteria@adbve.it [Autorita di Bacino dei Fiumi dell' Alto Adriatico, Cannaregio 4314, 30121 Venice (Italy); Cimolino, A.; Ferri, M.; Monego, M.; Norbiato, D.; Cappelletto, M.; Bisaglia, M. [Autorita di Bacino dei Fiumi dell' Alto Adriatico, Cannaregio 4314, 30121 Venice (Italy); Pretner, A.; Galli, A. [SGI Studio Galli Ingegneria, via della Provvidenza 13, 35030 Sarmeola di Rubano (PD) (Italy); Scarinci, A., E-mail: andrea.scarinci@sgi-spa.it [SGI Studio Galli Ingegneria, via della Provvidenza 13, 35030 Sarmeola di Rubano (PD) (Italy); Marsala, V.; Panelli, C. [SGI Studio Galli Ingegneria, via della Provvidenza 13, 35030 Sarmeola di Rubano (PD) (Italy); Gualdi, S., E-mail: silvio.gualdi@bo.ingv.it [Centro Euro-Mediterraneo per i Cambiamenti Climatici (CMCC), via Augusto Imperatore 16, 73100 Lecce (Italy); Bucchignani, E., E-mail: e.bucchignani@cira.it [Centro Euro-Mediterraneo per i Cambiamenti Climatici (CMCC), via Augusto Imperatore 16, 73100 Lecce (Italy); Torresan, S., E-mail: torresan@cmcc.it [Centro Euro-Mediterraneo per i Cambiamenti Climatici (CMCC), via Augusto Imperatore 16, 73100 Lecce (Italy); Pasini, S., E-mail: sara.pasini@stud.unive.it [Centro Euro-Mediterraneo per i Cambiamenti Climatici (CMCC), via Augusto Imperatore 16, 73100 Lecce (Italy); Department of Environmental Sciences, Informatics and Statistics, University Ca' Foscari Venice, Calle Larga S. Marta 2137, 30123 Venice (Italy); Critto, A., E-mail: critto@unive.it [Centro Euro-Mediterraneo per i Cambiamenti Climatici (CMCC), via Augusto Imperatore 16, 73100 Lecce (Italy); Department of Environmental Sciences, Informatics and Statistics, University Ca' Foscari Venice, Calle Larga S. Marta 2137, 30123 Venice (Italy); and others

    2012-12-01

    Climate change impacts on water resources, particularly groundwater, is a highly debated topic worldwide, triggering international attention and interest from both researchers and policy makers due to its relevant link with European water policy directives (e.g. 2000/60/EC and 2007/118/EC) and related environmental objectives. The understanding of long-term impacts of climate variability and change is therefore a key challenge in order to address effective protection measures and to implement sustainable management of water resources. This paper presents the modeling approach adopted within the Life + project TRUST (Tool for Regional-scale assessment of groUndwater Storage improvement in adaptation to climaTe change) in order to provide climate change hazard scenarios for the shallow groundwater of high Veneto and Friuli Plain, Northern Italy. Given the aim to evaluate potential impacts on water quantity and quality (e.g. groundwater level variation, decrease of water availability for irrigation, variations of nitrate infiltration processes), the modeling approach integrated an ensemble of climate, hydrologic and hydrogeologic models running from the global to the regional scale. Global and regional climate models and downscaling techniques were used to make climate simulations for the reference period 1961-1990 and the projection period 2010-2100. The simulation of the recent climate was performed using observed radiative forcings, whereas the projections have been done prescribing the radiative forcings according to the IPCC A1B emission scenario. The climate simulations and the downscaling, then, provided the precipitation, temperatures and evapo-transpiration fields used for the impact analysis. Based on downscaled climate projections, 3 reference scenarios for the period 2071-2100 (i.e. the driest, the wettest and the mild year) were selected and used to run a regional geomorphoclimatic and hydrogeological model. The final output of the model ensemble produced

  5. Integrating experimental and numerical methods for a scenario-based quantitative assessment of subsurface energy storage options

    Science.gov (United States)

    Kabuth, Alina; Dahmke, Andreas; Hagrey, Said Attia al; Berta, Márton; Dörr, Cordula; Koproch, Nicolas; Köber, Ralf; Köhn, Daniel; Nolde, Michael; Tilmann Pfeiffer, Wolf; Popp, Steffi; Schwanebeck, Malte; Bauer, Sebastian

    2016-04-01

    Within the framework of the transition to renewable energy sources ("Energiewende"), the German government defined the target of producing 60 % of the final energy consumption from renewable energy sources by the year 2050. However, renewable energies are subject to natural fluctuations. Energy storage can help to buffer the resulting time shifts between production and demand. Subsurface geological structures provide large potential capacities for energy stored in the form of heat or gas on daily to seasonal time scales. In order to explore this potential sustainably, the possible induced effects of energy storage operations have to be quantified for both specified normal operation and events of failure. The ANGUS+ project therefore integrates experimental laboratory studies with numerical approaches to assess subsurface energy storage scenarios and monitoring methods. Subsurface storage options for gas, i.e. hydrogen, synthetic methane and compressed air in salt caverns or porous structures, as well as subsurface heat storage are investigated with respect to site prerequisites, storage dimensions, induced effects, monitoring methods and integration into spatial planning schemes. The conceptual interdisciplinary approach of the ANGUS+ project towards the integration of subsurface energy storage into a sustainable subsurface planning scheme is presented here, and this approach is then demonstrated using the examples of two selected energy storage options: Firstly, the option of seasonal heat storage in a shallow aquifer is presented. Coupled thermal and hydraulic processes induced by periodic heat injection and extraction were simulated in the open-source numerical modelling package OpenGeoSys. Situations of specified normal operation as well as cases of failure in operational storage with leaking heat transfer fluid are considered. Bench-scale experiments provided parameterisations of temperature dependent changes in shallow groundwater hydrogeochemistry. As a

  6. Loose and Tight GNSS/INS Integrations: Comparison of Performance Assessed in Real Urban Scenarios

    OpenAIRE

    Falco, Gianluca; Pini, Marco; Marucco, Gianluca

    2017-01-01

    Global Navigation Satellite Systems (GNSSs) remain the principal mean of positioning in many applications and systems, but in several types of environment, the performance of standalone receivers is degraded. Although many works show the benefits of the integration between GNSS and Inertial Navigation Systems (INSs), tightly-coupled architectures are mainly implemented in professional devices and are based on high-grade Inertial Measurement Units (IMUs). This paper investigates the performanc...

  7. Integration of software for scenario exploration

    International Nuclear Information System (INIS)

    Oyamada, Kiyoshi; Ikeda, Takao

    1999-03-01

    The scenario exploration methodology using shadow models is a variation of the environmental simulation method. Key aspect of the scenario exploration is the use of shadow models which are not corresponding to any specific assumptions on physical processes and, instead, abstract their general features relevant to the effects on nuclide transport in a general manner so that benefit of using simulation approach can be maximized. In developing the shadow models, all the modelling options that have not yet been denied by the experts are kept and parametrized in a very general framework. This, in turn, enables one to treat various types of the uncertainty in performance assessment, i.e., scenario uncertainty, conceptual model uncertainty, mathematical model uncertainty and parameter uncertainty, in a common framework of uncertainty / sensitivity analysis. Objective of the current study is to review / modify the tools which have been developed separately and, thence, not fully consistent from one to the other and to integrate them into a unified methodology and software. Tasks for this are; 1. modification / integration of tools for scenario exploration of nuclide transport in the EBS and the near-field host rock, 2. verification of the software modified and integrated, 3. installation of the software at JNC. (author)

  8. Integrating land use and climate change scenarios and models into assessment of forested watershed services in Southern Thailand.

    Science.gov (United States)

    Trisurat, Yongyut; Eawpanich, Piyathip; Kalliola, Risto

    2016-05-01

    The Thadee watershed, covering 112km(2), is the main source of water for agriculture and household consumption in the Nakhon Srithammarat Province in Southern Thailand. As the natural forests upstream have been largely degraded and transformed to fruit tree and rubber plantations, problems with landslides and flooding have resulted. This research attempts to predict how further land-use/land-cover changes during 2009-2020 and conceivable changes in rainfall may influence the future levels of water yield and sediment load in the Thadee River. Three different land use scenarios (trend, development and conservation) were defined in collaboration with the local stakeholders, and three different rainfall scenarios (average rainfall, climate change and extreme wet) were determined on the basis of literature sources. Spatially explicit empirical modelling was employed to allocate future land demands and to assess the contributions of land use and rainfall changes, considering both their separate and combined effects. The results suggest that substantial land use changes may occur from a large expansion of rubber plantations in the upper sub-watersheds, especially under the development land use scenario. The reduction of the current annual rainfall by approximately 30% would decrease the predicted water yields by 38% from 2009. According to the extreme rainfall scenario (an increase of 36% with respect to current rainfall), an amplification of 50% of the current runoff could result. Sensitivity analyses showed that the predicted soil loss is more responsive to changes in rainfall than to the compared land use scenarios alone. However, very high sediment load and runoff levels were predicted on the basis of combined intensified land use and extreme rainfall scenarios. Three conservation activities-protection, reforestation and a mixed-cropping system-are proposed to maintain the functional watershed services of the Thadee watershed region. Copyright © 2016 Elsevier Inc

  9. Integrated assessment and scenarios simulation of urban water security system in the southwest of China with system dynamics analysis.

    Science.gov (United States)

    Yin, Su; Dongjie, Guan; Weici, Su; Weijun, Gao

    2017-11-01

    The demand for global freshwater is growing, while global freshwater available for human use is limited within a certain time and space. Its security has significant impacts on both the socio-economic system and ecological system. Recently, studies have focused on the urban water security system (UWSS) in terms of either water quantity or water quality. In this study, water resources, water environment, and water disaster issues in the UWSS were combined to establish an evaluation index system with system dynamics (SD) and geographic information systems (GIS). The GIS method performs qualitative analysis from the perspective of the spatial dimension; meanwhile, the SD method performs quantitative calculation about related water security problems from the perspective of the temporal dimension. We established a UWSS model for Guizhou province, China to analyze influencing factors, main driving factors, and system variation law, by using the SD method. We simulated the water security system from 2005 to 2025 under four scenarios (Guiyang scenario, Zunyi scenario, Bijie scenario and combined scenario). The results demonstrate that: (1) the severity of water security in cities is ranked as follows: three cities are secure in Guizhou province, four cities are in basic security and two cities are in a situation of insecurity from the spatial dimension of GIS through water security synthesis; and (2) the major driving factors of UWSS in Guizhou province include agricultural irrigation water demand, soil and water losses area, a ratio increase to the standard of water quality, and investment in environmental protection. A combined scenario is the best solution for UWSS by 2025 in Guizhou province under the four scenarios from the temporal dimension of SD. The results of this study provide a useful suggestion for the management of freshwater for the cities of Guizhou province in southwest China.

  10. Towards an Integrated Assessment Model for Tropospheric Ozone-Emission Inventories, Scenarios and Emission-control Options

    OpenAIRE

    Olsthoorn, X.

    1994-01-01

    IIASA intends to extend its RAINS model for addressing the issue of transboundary ozone air pollution. This requires the development of a VOC-emissions module, VOCs being precursors in ozone formation. The module should contain a Europe-wide emission inventory, a submodule for developing emission scenarios and a database of measures for VOC-emission control, including data about control effectiveness and control costs. It is recommended to use the forthcoming CORINAIR90 inventory for construc...

  11. Hybrid integral-differential simulator of EM force interactions/scenario-assessment tool with pre-computed influence matrix in applications to ITER

    Science.gov (United States)

    Rozov, V.; Alekseev, A.

    2015-08-01

    A necessity to address a wide spectrum of engineering problems in ITER determined the need for efficient tools for modeling of the magnetic environment and force interactions between the main components of the magnet system. The assessment of the operating window for the machine, determined by the electro-magnetic (EM) forces, and the check of feasibility of particular scenarios play an important role for ensuring the safety of exploitation. Such analysis-powered prevention of damages forms an element of the Machine Operations and Investment Protection strategy. The corresponding analysis is a necessary step in preparation of the commissioning, which finalizes the construction phase. It shall be supported by the development of the efficient and robust simulators and multi-physics/multi-system integration of models. The developed numerical model of interactions in the ITER magnetic system, based on the use of pre-computed influence matrices, facilitated immediate and complete assessment and systematic specification of EM loads on magnets in all foreseen operating regimes, their maximum values, envelopes and the most critical scenarios. The common principles of interaction in typical bilateral configurations have been generalized for asymmetry conditions, inspired by the plasma and by the hardware, including asymmetric plasma event and magnetic system fault cases. The specification of loads is supported by the technology of functional approximation of nodal and distributed data by continuous patterns/analytical interpolants. The global model of interactions together with the mesh-independent analytical format of output provides the source of self-consistent and transferable data on the spatial distribution of the system of forces for assessments of structural performance of the components, assemblies and supporting structures. The numerical model used is fully parametrized, which makes it very suitable for multi-variant and sensitivity studies (positioning, off

  12. Scenario-based roadmapping assessing nuclear technology development paths for future nuclear energy system scenarios

    International Nuclear Information System (INIS)

    Van Den Durpel, Luc; Roelofs, Ferry; Yacout, Abdellatif

    2009-01-01

    Nuclear energy may play a significant role in a future sustainable energy mix. The transition from today's nuclear energy system towards a future more sustainable nuclear energy system will be dictated by technology availability, energy market competitiveness and capability to achieve sustainability through the nuclear fuel cycle. Various scenarios have been investigated worldwide each with a diverse set of assumptions on the timing and characteristics of new nuclear energy systems. Scenario-based roadmapping combines the dynamic scenario-analysis of nuclear energy systems' futures with the technology roadmap information published and analysed in various technology assessment reports though integrated within the nuclear technology roadmap Nuclear-Roadmap.net. The advantages of this combination is to allow mutual improvement of scenario analysis and nuclear technology roadmapping providing a higher degree of confidence in the assessment of nuclear energy system futures. This paper provides a description of scenario-based roadmapping based on DANESS and Nuclear-Roadmap.net. (author)

  13. An integrated assessment of energy-water nexus at the state level in the United States: Projections and analyses under different scenarios through 2095

    Science.gov (United States)

    Liu, L.; Patel, P. L.; Hejazi, M. I.; Kyle, P.; Davies, E. G.; Zhou, Y.; Clarke, L.; Edmonds, J.

    2013-12-01

    Water withdrawals for thermoelectric power plants account for approximately half of the total water use in the United States. With growing electricity demands in the future and limited water supplies in many water-scarce states in the U.S., grasping the trade-off between energy and water requires an integrated modeling approach that can capture the interactions among energy, water availability, climate, technology, and economic factors at various scales. In this study, the Global Change Assessment Model (GCAM), a technologically-detailed integrated model of the economy, energy, agriculture and land use, water, and climate systems, with 14 geopolitical regions that are further dissaggregated into up to 18 agro-ecological zones, was extended to model the electricity and water systems at the state level in the U.S. More specifically, GCAM was employed to estimate future state-level electricity generation and demands, and the associated water withdrawals and consumptions under a set of six scenarios with extensive levels of details on generation fuel portfolio, cooling technology mix, and water use intensities. The state-level estimates were compared against available inventories where good agreement was achieved on national and regional levels. We then explored the electric-sector water use up to 2095, focusing on implications from: 1) socioeconomics and growing demands, 2) the adoption of climate mitigation policy (e.g., RCP4.5 W/m2 vs. a reference scenario), 3) the transition of cooling systems, 4) constraints on electricity trading across states (full trading vs. limited trading), and 5) the adoption of water saving technologies. Overall, the fast retirement of once-through cooling, together with the gradual transition from fossil fuels dominant to a mixture of different fuels, accelerate the decline of water withdrawals and correspondingly compensate consumptive water use. Results reveal that U.S. electricity generation expands significantly as population grows

  14. Improving risk assessment by defining consistent and reliable system scenarios

    Directory of Open Access Journals (Sweden)

    B. Mazzorana

    2009-02-01

    Full Text Available During the entire procedure of risk assessment for hydrologic hazards, the selection of consistent and reliable scenarios, constructed in a strictly systematic way, is fundamental for the quality and reproducibility of the results. However, subjective assumptions on relevant impact variables such as sediment transport intensity on the system loading side and weak point response mechanisms repeatedly cause biases in the results, and consequently affect transparency and required quality standards. Furthermore, the system response of mitigation measures to extreme event loadings represents another key variable in hazard assessment, as well as the integral risk management including intervention planning. Formative Scenario Analysis, as a supplement to conventional risk assessment methods, is a technique to construct well-defined sets of assumptions to gain insight into a specific case and the potential system behaviour. By two case studies, carried out (1 to analyse sediment transport dynamics in a torrent section equipped with control measures, and (2 to identify hazards induced by woody debris transport at hydraulic weak points, the applicability of the Formative Scenario Analysis technique is presented. It is argued that during scenario planning in general and with respect to integral risk management in particular, Formative Scenario Analysis allows for the development of reliable and reproducible scenarios in order to design more specifically an application framework for the sustainable assessment of natural hazards impact. The overall aim is to optimise the hazard mapping and zoning procedure by methodologically integrating quantitative and qualitative knowledge.

  15. Trends in scenario development methodologies and integration in NUMO's approach

    International Nuclear Information System (INIS)

    Ebashi, Takeshi; Ishiguro, Katsuhiko; Wakasugi, Keiichiro; Kawamura, Hideki; Gaus, Irina; Vomvoris, Stratis; Martin, Andrew J.; Smith, Paul

    2011-01-01

    The development of scenarios for quantitative or qualitative analysis is a key element of the assessment of the safety of geological disposal systems. As an outcome of an international workshop attended by European and the Japanese implementers, a number of features common to current methodologies could be identified, as well as trends in their evolution over time. In the late nineties, scenario development was often described as a bottom-up process, whereby scenarios were said to be developed in essence from FEP databases. Nowadays, it is recognised that, in practice, the approaches actually adopted are better described as top-down or 'hybrid', taking as their starting point an integrated (top-down) understanding of the system under consideration including uncertainties in initial state, sometimes assisted by the development of 'storyboards'. A bottom-up element remains (hence the term 'hybrid') to the extent that FEP databases or FEP catalogues (including interactions) are still used, but the focus is generally on completeness checking, which occurs parallel to the main assessment process. Recent advances focus on the consistent treatment of uncertainties throughout the safety assessment and on the integration of operational safety and long term safety. (author)

  16. Development of integrated scenarios to assess future conditions of aquatic ecosystems under water scarcity in the Mediterranean - perspectives from the GLOBAQUA project

    Science.gov (United States)

    Huber-Garcia, Verena; Akinsete, Ebun; Gampe, David; Ker Rault, Philippe; Kok, Kasper; Koundouri, Phoebe; Luttik, Joke; Nikulin, Grigory; Pistocchi, Alberto; Souliotis, Ioannis; Ludwig, Ralf

    2017-04-01

    systems experience this and a worsening of the situation can be expected if actions are not taken. To assess future conditions, spatially distributed, integrated scenarios to drive various impact models are inevitable. These simulations then assess future conditions of aquatic ecosystems, both in water quality and quantity, and in the end provide decision support. To achieve this goal, a modeling framework is set up to develop integrated scenarios of changes in climate, land use and water management. These scenarios are based on storylines around various Representative Concentration Pathways (RCPs) and Shared Socio-economic Pathways (SSPs), as established the Intergovernmental Panel on Climate Change (IPCC), and developed in collaboration with project partners and experts. Major challenges stem from the downscaling of these to the regional scale. Projections of future climate conditions originate from the simulations provided through the EURO-CORDEX project. An ensemble of different General Circulation Models (GCMs) driving various Regional Climate Models (RCMs) is available. After a thorough investigation of these projections and an estimation of the uncertainty envelope, a small subset of models was chosen in a carefully conducted selection procedure, following a cluster analysis. These selected simulations were downscaled to better represent the regional conditions and provide the implications of the RCPs in the storylines. The impacts of the SSPs are represented in spatially distributed land use maps developed through the land use change model iCLUE (Conversion of Land Use and its Effects). In a first step knowledge on past land use change is required and an analysis was carried out based on the CORINE land cover data. Extensive expert surveys have been conducted in the case study areas to determine the most important drivers of these changes, considering both, biophysical and socio-economic variables. The results of these were implemented in iCLUE taking into account

  17. Risk assessment of complex accident scenarios

    International Nuclear Information System (INIS)

    Kluegel, Jens-Uwe

    2012-01-01

    The use of methods of risk assessment in accidents in nuclear plants is based on an old tradition. The first consistent systematic study is considered to be the Rasmussen Study of the U.S. Nuclear Regulatory Commission, NRC, WASH-1400. Above and beyond the realm of nuclear technology, there is an extensive range of accident, risk and reliability research into technical-administrative systems. In the past, it has been this area of research which has led to the development of concepts of safety precautions of the type also introduced into nuclear technology (barrier concept, defense in depth, single-failure criterion), where they are now taken for granted as trivial concepts. Also for risk analysis, nuclear technology made use of methods (such as event and fault tree analyses) whose origins were outside the nuclear field. One area in which the use of traditional methods of probabilistic safety analysis is encountering practical problems is risk assessment of complex accident scenarios in nuclear technology. A definition is offered of the term 'complex accident scenarios' in nuclear technology. A number of problems are addressed which arise in the use of traditional PSA procedures in risk assessment of complex accident scenarios. Cases of complex accident scenarios are presented to demonstrate methods of risk assessment which allow robust results to be obtained even when traditional techniques of risk analysis are maintained as a matter of principle. These methods are based on the use of conditional risk metrics. (orig.)

  18. Sustainability assessment framework for scenarios – SAFS

    Energy Technology Data Exchange (ETDEWEB)

    Arushanyan, Yevgeniya, E-mail: yevgeniya.arushanyan@abe.kth.se [KTH Royal Institute of Technology, School of Architecture and the Built Environment, Department of Sustainable Development, Environmental Science and Engineering, Division of Environmental Strategies Research, Drottning Kristinas väg 30, 10044 Stockholm (Sweden); KTH Royal Institute of Technology, Centre for Sustainable Communications (CESC), Lindstedtsvägen 5, 100 44 Stockholm (Sweden); Ekener, Elisabeth; Moberg, Åsa [KTH Royal Institute of Technology, School of Architecture and the Built Environment, Department of Sustainable Development, Environmental Science and Engineering, Division of Environmental Strategies Research, Drottning Kristinas väg 30, 10044 Stockholm (Sweden); KTH Royal Institute of Technology, Centre for Sustainable Communications (CESC), Lindstedtsvägen 5, 100 44 Stockholm (Sweden)

    2017-03-15

    To address current challenges regarding sustainable development and support planning for this form of development, new learning about different possible futures and their potential sustainability implications is needed. One way of facilitating this learning is by combining the futures studies and sustainability assessment (SA) research fields. This paper presents the sustainability assessment framework for scenarios (SAFS), a method developed for assessing the environmental and social risks and opportunities of future scenarios, provides guidelines for its application and demonstrates how the framework can be applied. SAFS suggests assessing environmental and social aspects using a consumption perspective and a life cycle approach, and provides qualitative results. SAFS does not suggest any modelling using precise data, but instead offers guidelines on how to carry out a qualitative assessment, where both the process of assessing and the outcome of the assessment are valuable and can be used as a basis for discussion. The benefits, drawbacks and potential challenges of applying SAFS are also discussed in the paper. SAFS uses systems thinking looking at future societies as a whole, considering both environmental and social consequences. This encourages researchers and decision-makers to consider the whole picture, and not just individual elements, when considering different futures. - Highlights: • The paper presents a new methodological framework for qualitative sustainability assessment of future scenarios with transformative changes. • The framework suggests qualitative assessment with consumption perspective and a life cycle approach. • The paper presents the framework and provides guidelines for its application. • The paper demonstrates on an example how the framework can be applied. • The benefits, drawbacks and challenges of the framework application and the need for further development are discussed.

  19. Sustainability assessment framework for scenarios – SAFS

    International Nuclear Information System (INIS)

    Arushanyan, Yevgeniya; Ekener, Elisabeth; Moberg, Åsa

    2017-01-01

    To address current challenges regarding sustainable development and support planning for this form of development, new learning about different possible futures and their potential sustainability implications is needed. One way of facilitating this learning is by combining the futures studies and sustainability assessment (SA) research fields. This paper presents the sustainability assessment framework for scenarios (SAFS), a method developed for assessing the environmental and social risks and opportunities of future scenarios, provides guidelines for its application and demonstrates how the framework can be applied. SAFS suggests assessing environmental and social aspects using a consumption perspective and a life cycle approach, and provides qualitative results. SAFS does not suggest any modelling using precise data, but instead offers guidelines on how to carry out a qualitative assessment, where both the process of assessing and the outcome of the assessment are valuable and can be used as a basis for discussion. The benefits, drawbacks and potential challenges of applying SAFS are also discussed in the paper. SAFS uses systems thinking looking at future societies as a whole, considering both environmental and social consequences. This encourages researchers and decision-makers to consider the whole picture, and not just individual elements, when considering different futures. - Highlights: • The paper presents a new methodological framework for qualitative sustainability assessment of future scenarios with transformative changes. • The framework suggests qualitative assessment with consumption perspective and a life cycle approach. • The paper presents the framework and provides guidelines for its application. • The paper demonstrates on an example how the framework can be applied. • The benefits, drawbacks and challenges of the framework application and the need for further development are discussed.

  20. Comparison of scenarios for the integrated management of construction and demolition waste by life cycle assessment: A case study in Brazil.

    Science.gov (United States)

    Penteado, Carmenlucia Santos Giordano; Rosado, Laís Peixoto

    2016-10-01

    Brazil, as a result of economic development and strengthening of the construction industry in recent years, is generating an increasing amount of construction and demolition waste (CDW). Hence, environmental assessment of the management systems is vital. A life cycle assessment (LCA) is presented of CDW management in a medium-sized municipality located in the southeast region of Brazil, where the impacts of leaching were not considered due to absence of consistent data. Six different proposed scenarios for the current CDW management situation have been considered. These scenarios comprised the combined use of landfilling, sorting, and recycling, and the use of CDW as paving material for landfill roads, in different percentages. Considering 0.8 ton of waste as the functional unit, the life cycle inventory was performed using primary data obtained from field survey and secondary data from the database Ecoinvent version 3.1, and from the literature. The method CML 2 baseline 2001 was used for environmental impacts evaluation. The results highlight that recycling is beneficial when efficient CDW sorting takes place at construction sites, avoiding the transport of refuse to sorting and recycling facilities, and the distance between the generation source and the recycling unit is within 30 km. Thus, our results are helpful to ensure that the decision-making processes are based on environmental and technical aspects, and not only on economic and political factors, and also provide data and support for other LCA studies on CDW. © The Author(s) 2016.

  1. Predictive integrated modelling for ITER scenarios

    International Nuclear Information System (INIS)

    Artaud, J.F.; Imbeaux, F.; Aniel, T.; Basiuk, V.; Eriksson, L.G.; Giruzzi, G.; Hoang, G.T.; Huysmans, G.; Joffrin, E.; Peysson, Y.; Schneider, M.; Thomas, P.

    2005-01-01

    The uncertainty on the prediction of ITER scenarios is evaluated. 2 transport models which have been extensively validated against the multi-machine database are used for the computation of the transport coefficients. The first model is GLF23, the second called Kiauto is a model in which the profile of dilution coefficient is a gyro Bohm-like analytical function, renormalized in order to get profiles consistent with a given global energy confinement scaling. The package of codes CRONOS is used, it gives access to the dynamics of the discharge and allows the study of interplay between heat transport, current diffusion and sources. The main motivation of this work is to study the influence of parameters such plasma current, heat, density, impurities and toroidal moment transport. We can draw the following conclusions: 1) the target Q = 10 can be obtained in ITER hybrid scenario at I p = 13 MA, using either the DS03 two terms scaling or the GLF23 model based on the same pedestal; 2) I p = 11.3 MA, Q = 10 can be reached only assuming a very peaked pressure profile and a low pedestal; 3) at fixed Greenwald fraction, Q increases with density peaking; 4) achieving a stationary q-profile with q > 1 requires a large non-inductive current fraction (80%) that could be provided by 20 to 40 MW of LHCD; and 5) owing to the high temperature the q-profile penetration is delayed and q = 1 is reached about 600 s in ITER hybrid scenario at I p = 13 MA, in the absence of active q-profile control. (A.C.)

  2. Integrated Hydrological Model-Based Assessment of Stormwater Management Scenarios in Copenhagen’s First Climate Resilient Neighbourhood Using the Three Point Approach

    Directory of Open Access Journals (Sweden)

    Sara Maria Lerer

    2017-11-01

    Full Text Available The city of Copenhagen currently pursues a very ambitious plan to make the city ‘cloudburst proof’ within the next 30 years. The cloudburst management plan has the potential to support the city’s aim to become more green, liveable, and sustainable. In this study, we assessed stormwater system designs using the Three Point Approach (3PA as a framework, where an indicator value for each domain was calculated using state-of-the-art modelling techniques. We demonstrated the methodology on scenarios representing sequential enhancements of the cloudburst management plan for a district that has been appointed to become the first climate resilient neighbourhood in Copenhagen. The results show that if the cloudburst system is exploited to discharge runoff from selected areas that are disconnected from the combined sewer system, then the plan leads to multiple benefits. These include improved flood protection under a 100-years storm (i.e., compliance with the new demands in domain C of the 3PA, reduced surcharge to terrain under a 10-years storm (i.e., compliance with the service goal in domain B of the 3PA and an improved yearly water balance (i.e., better performance in domain A of the 3PA.

  3. Integrated assessment of future potential global change scenarios and their hydrological impacts in coastal aquifers – a new tool to analyse management alternatives in the Plana Oropesa-Torreblanca aquifer

    Directory of Open Access Journals (Sweden)

    D. Pulido-Velazquez

    2018-05-01

    Full Text Available Any change in the components of the water balance in a coastal aquifer, whether natural or anthropogenic, can alter the freshwater–salt water equilibrium. In this sense climate change (CC and land use and land cover (LULC change might significantly influence the availability of groundwater resources in the future. These coastal systems demand an integrated analysis of quantity and quality issues to obtain an appropriate assessment of hydrological impacts using density-dependent flow solutions. The aim of this work is to perform an integrated analysis of future potential global change (GC scenarios and their hydrological impacts in a coastal aquifer, the Plana Oropesa-Torreblanca aquifer. It is a Mediterranean aquifer that extends over 75 km2 in which important historical LULC changes have been produced and are planned for the future. Future CC scenarios will be defined by using an equi-feasible and non-feasible ensemble of projections based on the results of a multi-criteria analysis of the series generated from several regional climatic models with different downscaling approaches. The hydrological impacts of these CC scenarios combined with future LULC scenarios will be assessed with a chain of models defined by a sequential coupling of rainfall-recharge models, crop irrigation requirements and irrigation return models (for the aquifer and its neighbours that feed it, and a density-dependent aquifer approach. This chain of models, calibrated using the available historical data, allow testing of the conceptual approximation of the aquifer behaviour. They are also fed with series representatives of potential global change scenarios in order to perform a sensitivity analysis regarding future scenarios of rainfall recharge, lateral flows coming from the hydraulically connected neighbouring aquifer, agricultural recharge (taking into account expected future LULC changes and sea level rise (SLR. The proposed analysis is valuable for

  4. Scenario drafting to anticipate future developments in technology assessment

    Directory of Open Access Journals (Sweden)

    Retèl Valesca P

    2012-08-01

    Full Text Available Abstract Background Health Technology Assessment (HTA information, and in particular cost-effectiveness data is needed to guide decisions, preferably already in early stages of technological development. However, at that moment there is usually a high degree of uncertainty, because evidence is limited and different development paths are still possible. We developed a multi-parameter framework to assess dynamic aspects of a technology -still in development-, by means of scenario drafting to determine the effects, costs and cost-effectiveness of possible future diffusion patterns. Secondly, we explored the value of this method on the case of the clinical implementation of the 70-gene signature for breast cancer, a gene expression profile for selecting patients who will benefit most from chemotherapy. Methods To incorporate process-uncertainty, ten possible scenarios regarding the introduction of the 70-gene signature were drafted with European experts. Out of 5 most likely scenarios, 3 drivers of diffusion (non-compliance, technical failure, and uptake were quantitatively integrated in a decision-analytical model. For these scenarios, the cost-effectiveness of the 70-gene signature expressed in Incremental Cost-Effectiveness Ratios (ICERs was compared to clinical guidelines, calculated from the past (2005 until the future (2020. Results In 2005 the ICER was €1,9 million/quality-adjusted-life-year (QALY, meaning that the 70-gene signature was not yet cost-effective compared to the current clinical guideline. The ICER for the 70-gene signature improved over time with a range of €1,9 million to €26,145 in 2010 and €1,9 million to €11,123/QALY in 2020 depending on the separate scenario used. From 2010, the 70-gene signature should be cost-effective, based on the combined scenario. The uptake-scenario had strongest influence on the cost-effectiveness. Conclusions When optimal diffusion of a technology is sought, incorporating process

  5. Multi scenario seismic hazard assessment for Egypt

    Science.gov (United States)

    Mostafa, Shaimaa Ismail; Abd el-aal, Abd el-aziz Khairy; El-Eraki, Mohamed Ahmed

    2018-05-01

    Egypt is located in the northeastern corner of Africa within a sensitive seismotectonic location. Earthquakes are concentrated along the active tectonic boundaries of African, Eurasian, and Arabian plates. The study area is characterized by northward increasing sediment thickness leading to more damage to structures in the north due to multiple reflections of seismic waves. Unfortunately, man-made constructions in Egypt were not designed to resist earthquake ground motions. So, it is important to evaluate the seismic hazard to reduce social and economic losses and preserve lives. The probabilistic seismic hazard assessment is used to evaluate the hazard using alternative seismotectonic models within a logic tree framework. Alternate seismotectonic models, magnitude-frequency relations, and various indigenous attenuation relationships were amended within a logic tree formulation to compute and develop the regional exposure on a set of hazard maps. Hazard contour maps are constructed for peak ground acceleration as well as 0.1-, 0.2-, 0.5-, 1-, and 2-s spectral periods for 100 and 475 years return periods for ground motion on rock. The results illustrate that Egypt is characterized by very low to high seismic activity grading from the west to the eastern part of the country. The uniform hazard spectra are estimated at some important cities distributed allover Egypt. The deaggregation of seismic hazard is estimated at some cities to identify the scenario events that contribute to a selected seismic hazard level. The results of this study can be used in seismic microzonation, risk mitigation, and earthquake engineering purposes.

  6. Coordinated Development and Deployment of Scenarios for Sustained Assessment

    Science.gov (United States)

    Lipschultz, F.; Weaver, C. P.; Leidner, A. K.; Delgado, A.; Grambsch, A.

    2017-12-01

    There has been a clear need for a more coordinated Federal government approach for authoritative, climate-relevant scenarios to support growing demands by decision-makers, to meet stakeholder needs for consistent approaches and guidance, and to better address the needs of the impacts, adaptation and vulnerability community. To begin to satisfy these decision-support needs, in early 2015 the U.S. Global Change Research Program (USGCRP) began coordinated production of scenario information for use across a suite of USGCRP activities. These have been implemented in the 4th National Climate Assessment (NCA4), the Climate Science Special Report and the Climate Resilience Toolkit (CRT), all of which are intended to help better organize, summarize, and communicate science to decision-makers as they think about our future. First, USGCRP introduced and implemented an explicit risk-framing approach across the entire scenario enterprise to encourage exploration of tail risks. A suite of scenario products was developed framed around three simplified storylines: `Lower', `Higher', and `Upper Bound' departures from current baselines. Second, USGCRP developed future climate information for the U.S. using Representative Concentration Pathway (RCP) 8.5 and RCP 4.5, including a weighted mean of Global Climate Models and adoption of an improved statistical downscaling approach across USGCRP products. Additional variables were derived from the downscaled parameters for use across USGCRP reports and in the CRT's Climate Explorer tool. Third, and given the need to address other tightly-coupled global changes in a more integrated way, a set of population, housing density, and impervious surface projections were developed based on global scenarios. In addition, USGCRP and the National Ocean Council developed scenarios of future sea-level rise and coastal-flood hazard for the U.S. and integrated them into existing Federal capabilities to support preparedness planning. To better convey these

  7. Application of fuzzy sets and cognitive maps to incorporate social science scenarios in integrated assessment models: A case study of urbanization in Ujung Pandang, Indonesia.

    NARCIS (Netherlands)

    de Kok, Jean-Luc; Titus, Milan; Wind, H.G.

    2000-01-01

    Decision-support systems in the field of integrated water management could benefit considerably from social science knowledge, as many environmental changes are human-induced. Unfortunately the adequate incorporation of qualitative social science concepts in a quantitative modeling framework is not

  8. Integrated Assessment Model Evaluation

    Science.gov (United States)

    Smith, S. J.; Clarke, L.; Edmonds, J. A.; Weyant, J. P.

    2012-12-01

    Integrated assessment models of climate change (IAMs) are widely used to provide insights into the dynamics of the coupled human and socio-economic system, including emission mitigation analysis and the generation of future emission scenarios. Similar to the climate modeling community, the integrated assessment community has a two decade history of model inter-comparison, which has served as one of the primary venues for model evaluation and confirmation. While analysis of historical trends in the socio-economic system has long played a key role in diagnostics of future scenarios from IAMs, formal hindcast experiments are just now being contemplated as evaluation exercises. Some initial thoughts on setting up such IAM evaluation experiments are discussed. Socio-economic systems do not follow strict physical laws, which means that evaluation needs to take place in a context, unlike that of physical system models, in which there are few fixed, unchanging relationships. Of course strict validation of even earth system models is not possible (Oreskes etal 2004), a fact borne out by the inability of models to constrain the climate sensitivity. Energy-system models have also been grappling with some of the same questions over the last quarter century. For example, one of "the many questions in the energy field that are waiting for answers in the next 20 years" identified by Hans Landsberg in 1985 was "Will the price of oil resume its upward movement?" Of course we are still asking this question today. While, arguably, even fewer constraints apply to socio-economic systems, numerous historical trends and patterns have been identified, although often only in broad terms, that are used to guide the development of model components, parameter ranges, and scenario assumptions. IAM evaluation exercises are expected to provide useful information for interpreting model results and improving model behavior. A key step is the recognition of model boundaries, that is, what is inside

  9. Sensitivity of North American agriculture to ENSO-based climate scenarios and their socio-economic consequences: Modeling in an integrated assessment framework

    Energy Technology Data Exchange (ETDEWEB)

    Rosenberg, N.J.; Izaurralde, R.C.; Brown, R.A.; Sands, R.D. [Pacific Northwest National Lab., Richland, WA (United States); Legler, D. [Florida State Univ., Tallahassee, FL (United States). Center for Ocean Atmosphere Prediction Studies; Srinivasan, R. [Texas A and M Univ., College Station, TX (United States). Blacklands Research Center; Tiscareno-Lopez, M.

    1997-09-01

    A group of Canadian, US and Mexican natural resource specialists, organized by the Pacific Northwest National Laboratory (PNNL) under its North American Energy, Environment and Economy (NA3E) Program, has applied a simulation modeling approach to estimating the impact of ENSO-driven climatic variations on the productivity of major crops grown in the three countries. Methodological development is described and results of the simulations presented in this report. EPIC (the Erosion Productivity Impact Calculator) was the agro-ecosystem model selected-for this study. EPIC uses a daily time step to simulate crop growth and yield, water use, runoff and soil erosion among other variables. The model was applied to a set of so-called representative farms parameterized through a specially-assembled Geographic Information System (GIS) to reflect the soils, topography, crop management and weather typical of the regions represented. Fifty one representative farms were developed for Canada, 66 for the US and 23 for Mexico. El Nino-Southern Oscillation (ENSO) scenarios for the EPIC simulations were created using the historic record of sea-surface temperature (SST) prevailing in the eastern tropical Pacific for the period October 1--September 30. Each year between 1960 and 1989 was thus assigned to an ENSO category or state. The ENSO states were defined as El Nino (EN, SST warmer than the long-term mean), Strong El Nino (SEN, much warmer), El Viejo (EV, cooler) and Neutral (within {+-}0.5 C of the long-term mean). Monthly means of temperature and precipitation were then calculated at each farm for the period 1960--1989 and the differences (or anomalies) between the means in Neutral years and EN, SEN and EV years determined. The average monthly anomalies for each ENSO state were then used to create new monthly statistics for each farm and ENSO-state combination. The adjusted monthly statistics characteristic of each ENSO state were then used to drive a stochastic-weather simulator

  10. Scenario Development Workshop Synopsis. Integration Group for the Safety Case - June 2015

    International Nuclear Information System (INIS)

    Smith, Paul; Voinis, Sylvie; Griffault, Lise; De Meredieu, Jean; Kwong, Gloria; ); Van Luik, Abraham; Bailey, Lucy; Capouet, Manuel; Depaus, Christophe; Makino, Hitoshi; Leigh, Christi; Kirkes, Ross; Leino, Jaakko; Niemeyer, Matthias; Wolf, Jens; Watson, Sarah; Franke, Bettina; Ilett, Doug; Pastina, Barbara; Weetjens, Eef

    2016-03-01

    Scenario development and selection describes the collection and organisation of the scientific and technical information relevant to the potential paths of evolution of a radioactive waste disposal facility (repository) that is necessary to assess its long-term performance and safety. In 1999, the NEA held its first workshop on scenario development in Madrid, Spain, with the objective to review the methods for developing scenarios in safety assessments and their application. Since then, the process of scenario development and analysis for the disposal of radioactive waste has changed and, in 2015, the NEA Integration Group for the Safety Case (IGSC) held a second workshop on this topic at its offices in Paris to further evaluate the experience acquired in developing scenarios since 1999. To prepare for this workshop, the IGSC also launched a survey in 2014 to gather the latest scenario development and uncertainty management strategies used in IGSC member countries. The purposes of the workshop were to (i) provide a forum to review and discuss methods for scenario development and their contribution to the development of recent safety cases (since the 1999 workshop); (ii) examine the latest methods and compare their scope, consistency and function within the overall safety assessment process, based on practical experience of applications; and (iii) provide a basis for producing the present report summarising the current status of scenario methodologies, identifying where sufficient methods exist and any outstanding problem areas. This report provides an overview of the state of the art in scenario development related to the long-term safety of geological repositories for radioactive waste. In particular, it discusses how potential scenarios are developed in safety assessments of radioactive waste that contains long-lived radionuclides. Safety assessment is the process of quantitatively and qualitatively evaluating the safety of a repository, often in support of a

  11. Global Water Scarcity Assessment under Post-SRES Scenarios

    Science.gov (United States)

    Hanasaki, N.; Fujimori, S.

    2011-12-01

    A large number of future projections contributed to the fourth Assessment Report of IPCC were based on Special Report on Emission Scenarios (SRES). Processes toward the fifth Assessment Report are under way, and post-SRES scenarios, called Shared Socio-economic Pathways (SSP) are being prepared. One of the key challenges of SSP is provision of detailed socio-economic scenarios compared to SRES for impact, adaptation and vulnerability studies. In this study, a comprehensive global water scarcity assessment was conducted, using a state of the art global water resources model H08 (Hanasaki et al., 2008a, 2008b, 2010). We used a prototype of SSP developed by National Institute for Environmental Studies, Japan. Two sets of socio economic scenarios and two sets of climate scenarios were prepared to run H08 for the period 2001-2100. Socio-economic scenarios include Business As Usual and High Mitigation Capacity. Climate scenarios include Reference and Mitigation which stabilizes green house gas concentration at a certain level. We analyzed the simulation results of four combinations, particularly focusing on the sensitivity of socio-economic scenarios to major water resources indices.

  12. Assessment of nuclear power scenarios allowing for matrix behavior in radiological impact modeling of disposal scenarios

    International Nuclear Information System (INIS)

    Tronche, E.; Boussier, H.

    2000-01-01

    Under the provisions of the 1991 French radioactive waste management law, various fuel cycle scenarios will be assessed and compared in terms of feasibility, flexibility, cost, and ultimate waste radio-toxic inventory. The latter criterion may be further broken down into 'potential radio-toxic inventory' (the radio-toxic inventory of all the radionuclides produced) and 'residual radio-toxic inventory' (the radionuclide fraction reaching the biosphere after migration from the repository). The innovative scientific contribution of this study is to consider a third type of radio-toxic inventory: the potential radio-toxic inventory after conditioning, i.e. taking into account the containment capacity of the radionuclide conditioning matrices. The matrix fraction subjected to alteration over time determines the potential for radionuclide release, hence the notion of the potential radio-toxic inventory after conditioning. An initial comparison of possible scenarios is proposed by considering orders of magnitude for the radionuclide containment capacity of the disposal matrices and for their mobilization potential. All the scenarios investigated are normalized to the same annual electric power production so that a legitimate comparison can be established for the ultimate wasteform produced per year of operation. This approach reveals significant differences among the scenarios considered that do not appear when only the raw potential radio-toxic inventory is taken into account. The matrix containment performance has a decisive effect on the final impact of a given scenario or type of scenario. Pu recycling scenarios thus reduce the potential radio-toxicity by roughly a factor of 50 compared with an open cycle; the gain rises to a factor of about 300 for scenarios in which Pu and the minor actinides are recycled. Interestingly, the results obtained by the use of a dedicated containment matrix for the minor actinides in a scenario limited to Pu recycling were comparable to

  13. Scenarios

    NARCIS (Netherlands)

    Pérez-Soba, Marta; Maas, Rob

    2015-01-01

    We cannot predict the future with certainty, but we know that it is influenced by our current actions, and that these in turn are influenced by our expectations. This is why future scenarios have existed from the dawn of civilization and have been used for developing military, political and economic

  14. Integrating out resonances in strongly-coupled electroweak scenarios

    Directory of Open Access Journals (Sweden)

    Rosell Ignasi

    2017-01-01

    Full Text Available Accepting that there is a mass gap above the electroweak scale, the Electroweak Effective Theory (EWET is an appropriate tool to describe this situation. Since the EWET couplings contain information on the unknown high-energy dynamics, we consider a generic strongly-coupled scenario of electroweak symmetry breaking, where the known particle fields are coupled to heavier states. Then, and by integrating out these heavy fields, we study the tracks of the lightest resonances into the couplings. The determination of the low-energy couplings (LECs in terms of resonance parameters can be made more precise by considering a proper short-distance behaviour on the Lagrangian with heavy states, since the number of resonance couplings is then reduced. Notice that we adopt a generic non-linear realization of the electroweak symmetry breaking with a singlet Higgs.

  15. Socio-economic Scenarios in Climate Assessments (IC11). Synthesis

    International Nuclear Information System (INIS)

    Van Drunen, M.; Berkhout, F.

    2011-09-01

    It is widely recognised that projections of social and economic futures are circumscribed by irreducible uncertainties and ignorance. A common analytical response is to develop scenarios that map a range of alternative possible outcomes. The application of scenarios in climate assessments in the Netherlands was investigated in this report, focusing on the use of the socio-economic scenarios 'Welvaart en Leefomgeving' (WLO - The Future of the Dutch Built Environment). This research was carried out within the Climate Changes Spatial Planning (CcSP) programme. WLO scenarios have been applied in climate assessment studies. WLO generates figures and data that are useful. Nevertheless we encountered several CcSP projects that did not apply any socio-economic scenarios, whilst this seemed necessary based on their objectives. In general, climate assessments make little sense if socio-economic developments are not taken into account. Interestingly, some of the studies that did apply socio-economic scenarios, picked only one or two of the scenarios generated by WLO. From a theoretical point of view this selective 'shopping' may lead to a tunnel vision, because it is impossible to estimate which scenario is more probable than the others. At the other hand it is often impractical to explore all four scenarios. The time horizon of WLO was in several cases too short for climate assessments. As it is probable that the structure of society has changed significantly by 2040, it is difficult to quantitatively support the storylines as was done in WLO, because many model assumptions are not correct anymore. Possibly it is better to take a backcasting approach for the second half of the century for the purpose of the CcSP programme. The two case studies described in this report provide examples of good practice that are likely to be useful in future projects that deal with scenarios. In addition, this study produced an interactive website (www.climatescenarios.nl) that provides key

  16. Linking global scenarios to national assessments: Experiences from the Resources Planning Act (RPA) Assessment

    Science.gov (United States)

    Linda L. Langner; Peter J. Ince

    2012-01-01

    The Resources Planning Act (RPA) Assessment provides a nationally consistent analysis of the status and trends of the Nation's renewable forest resources. A global scenario approach was taken for the 2010 RPA Assessment to provide a shared world view of potential futures. The RPA Assessment scenarios were linked to the global scenarios and climate projections used...

  17. Transdisciplinary knowledge integration : cases from integrated assessment and vulnerability assessment

    NARCIS (Netherlands)

    Hinkel, J.

    2008-01-01

    Keywords: climate change, integrated assessment, knowledge integration, transdisciplinary research, vulnerability, vulnerability assessment.
    This thesis explores how transdisciplinary knowledge integration can be facilitated in the context of integrated assessments and vulnerability

  18. Increasing Interest in Cognitive Psychology Using Scenario-Based Assessment

    Science.gov (United States)

    Cormack, Sophie

    2014-01-01

    Students often perceive cognitive psychology as an abstract and difficult subject with little intrinsic interest. When student feedback identified problems with the traditional essay assessment in a cognitive psychology module, action research led to the development of a forensic scenario-based assessment which successfully increased student…

  19. Integrated assessment briefs

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-04-01

    Integrated assessment can be used to evaluate and clarify resource management policy options and outcomes for decision makers. The defining characteristics of integrated assessment are (1) focus on providing information and analysis that can be understood and used by decision makers rather than for merely advancing understanding and (2) its multidisciplinary approach, using methods, styles of study, and considerations from a broader variety of technical areas than would typically characterize studies produced from a single disciplinary standpoint. Integrated assessment may combine scientific, social, economic, health, and environmental data and models. Integrated assessment requires bridging the gap between science and policy considerations. Because not everything can be valued using a single metric, such as a dollar value, the integrated assessment process also involves evaluating trade-offs among dissimilar attributes. Scientists at Oak Ridge National Laboratory (ORNL) recognized the importance and value of multidisciplinary approaches to solving environmental problems early on and have pioneered the development of tools and methods for integrated assessment over the past three decades. Major examples of ORNL`s experience in the development of its capabilities for integrated assessment are given.

  20. Risk assessment of mitigated domino scenarios in process facilities

    International Nuclear Information System (INIS)

    Landucci, Gabriele; Necci, Amos; Antonioni, Giacomo; Argenti, Francesca; Cozzani, Valerio

    2017-01-01

    The propagation of accidents among process units may lead to severe cascading events or domino effects with catastrophic consequences. Prevention, mitigation and management of domino scenarios is of utmost importance and may be achieved in industrial facilities through the adoption of multiple safety layers. The present study was aimed at developing an innovative methodology to address the quantitative risk assessment (QRA) of domino scenarios accounting for the presence and role of safety barriers. Based on the expected performance of safety barriers, a dedicated event tree analysis allowed the identification and the assessment of the frequencies of the different end-point events deriving from unmitigated and partially mitigated domino chains. Specific criteria were introduced in consequence analysis to consider the mitigation effects of end-point scenarios deriving from safety barriers. Individual and societal risk indexes were calculated accounting for safety barriers and the mitigated scenarios that may result from their actions. The application of the methodology to case-studies of industrial interest proved the importance of introducing a specific systematic and quantitative analysis of safety barrier performance when addressing escalation leading to domino effect. - Highlights: • A methodology was developed to account for safety barrier performance in escalation prevention. • The methodology allows quantitative assessment accounting for safety barrier performance. • A detailed analysis of transient mitigated scenarios is allowed by the developed procedure. • The procedure allows accounting for safety barrier performance in QRA of domino scenarios. • An important reduction in the risk due to domino scenarios is evidenced when considering safety barriers.

  1. Assessement of user needs for climate change scenarios in Switzerland

    Science.gov (United States)

    Fischer, Andreas; Liniger, Mark; Flückiger-Knutti, Jacqueline

    2016-04-01

    There is a growing demand to assess and inform about future climate change and its impacts on society and ecosystems and to deduce appropriate adaptation strategies. The basis for such assessments are reliable and up-to-date climate change scenarios on the local to regional scale. In Switzerland, an important step has been accomplished by the release of the climate scenarios in 2011 ("CH2011"). New climate model simulations, an improved scientific understanding and new statistical downscaling tools make an update of these scenarios necessary. An important component toward the new national scenarios "CH2018" are the consideration of user needs in order to ensure that the new scenarios are user-tailored and hence find a wide applicability. The new CH2018 scenarios are developed in the framework of the recently founded National Center for Climate Services (NCCS). To get a better overview of who the users of climate scenarios are and what they need, a comprehensive market research was undertaken. The survey targeted the most climate-relevant sectors, and considered representatives from administration, research and private companies across Switzerland. The survey comprised several qualitative group interviews with key stakeholders, as well as a written questionaire, answered by more than one hundred users. Additionally, two workshops were organized to gather the needs in dissemination of climate scenarios. The results of the survey show the necessity to classify the user needs according to the level of usage: "intensive users" are mainly researchers who handle large climate scenario data for further use in subsequent impact studies; "extensive users" are usually from administrations or consulting companies and perform simple calculations for specific questions or use provided graphics and tables; "facilitators" are usually from media, NGOs or schools and process and disseminate scenario information for a specific target group. The less intensive the usage of climate

  2. Consistent Posttest Calculations for LOCA Scenarios in LOBI Integral Facility

    Directory of Open Access Journals (Sweden)

    F. Reventós

    2012-01-01

    Full Text Available Integral test facilities (ITFs are one of the main tools for the validation of best estimate thermalhydraulic system codes. The experimental data are also of great value when compared to the experiment-scaled conditions in a full NPP. The LOBI was a single plus a triple-loop (simulated by one loop test facility electrically heated to simulate a 1300 MWe PWR. The scaling factor was 712 for the core power, volume, and mass flow. Primary and secondary sides contained all main active elements. Tests were performed for the characterization of phenomenologies relevant to large and small break LOCAs and special transients in PWRs. The paper presents the results of three posttest calculations of LOBI experiments. The selected experiments are BL-30, BL-44, and A1-84. They are LOCA scenarios of different break sizes and with different availability of safety injection components. The goal of the analysis is to improve the knowledge of the phenomena occurred in the facility in order to use it in further studies related to qualifying nodalizations of actual plants or to establish accuracy data bases for uncertainty methodologies. An example of procedure of implementing changes in a common nodalization valid for simulating tests occurred in a specific ITF is presented along with its confirmation based on posttests results.

  3. Beyond eruptive scenarios: assessing tephra fallout hazard from Neapolitan volcanoes.

    Science.gov (United States)

    Sandri, Laura; Costa, Antonio; Selva, Jacopo; Tonini, Roberto; Macedonio, Giovanni; Folch, Arnau; Sulpizio, Roberto

    2016-04-12

    Assessment of volcanic hazards is necessary for risk mitigation. Typically, hazard assessment is based on one or a few, subjectively chosen representative eruptive scenarios, which use a specific combination of eruptive sizes and intensities to represent a particular size class of eruption. While such eruptive scenarios use a range of representative members to capture a range of eruptive sizes and intensities in order to reflect a wider size class, a scenario approach neglects to account for the intrinsic variability of volcanic eruptions, and implicitly assumes that inter-class size variability (i.e. size difference between different eruptive size classes) dominates over intra-class size variability (i.e. size difference within an eruptive size class), the latter of which is treated as negligible. So far, no quantitative study has been undertaken to verify such an assumption. Here, we adopt a novel Probabilistic Volcanic Hazard Analysis (PVHA) strategy, which accounts for intrinsic eruptive variabilities, to quantify the tephra fallout hazard in the Campania area. We compare the results of the new probabilistic approach with the classical scenario approach. The results allow for determining whether a simplified scenario approach can be considered valid, and for quantifying the bias which arises when full variability is not accounted for.

  4. Combining lifecycle and risk assessments of mineral waste reuse scenarios for decision making support

    International Nuclear Information System (INIS)

    Benetto, Enrico; Tiruta-Barna, Ligia; Perrodin, Yves

    2007-01-01

    Lack of regulations and standards on mineral waste recycling makes Life Cycle Assessment (LCA) and Ecological Risk Assessment (ERA) useful methods for environmental assessment of recycling scenarios. An unsolved problem arises whenever two scenarios of recycling have to be compared according to both ERA and LCA impact results considered simultaneously. A methodology to combine LCA and ERA results and tools toward Integrated Environmental Assessment (IEA) is proposed together with three application examples based on case studies. The most effective combination approach is to define further impact categories for ERA to be considered with the standard LCA ones. Then, the use of a multicriteria analysis method was proved to be an efficient way to rank alternative scenarios with respect to all the results. The key issues to be further researched are discussed and proposals are suggested

  5. An Integrated Scenario Ensemble-Based Framework for Hurricane Evacuation Modeling: Part 1-Decision Support System.

    Science.gov (United States)

    Davidson, Rachel A; Nozick, Linda K; Wachtendorf, Tricia; Blanton, Brian; Colle, Brian; Kolar, Randall L; DeYoung, Sarah; Dresback, Kendra M; Yi, Wenqi; Yang, Kun; Leonardo, Nicholas

    2018-03-30

    This article introduces a new integrated scenario-based evacuation (ISE) framework to support hurricane evacuation decision making. It explicitly captures the dynamics, uncertainty, and human-natural system interactions that are fundamental to the challenge of hurricane evacuation, but have not been fully captured in previous formal evacuation models. The hazard is represented with an ensemble of probabilistic scenarios, population behavior with a dynamic decision model, and traffic with a dynamic user equilibrium model. The components are integrated in a multistage stochastic programming model that minimizes risk and travel times to provide a tree of evacuation order recommendations and an evaluation of the risk and travel time performance for that solution. The ISE framework recommendations offer an advance in the state of the art because they: (1) are based on an integrated hazard assessment (designed to ultimately include inland flooding), (2) explicitly balance the sometimes competing objectives of minimizing risk and minimizing travel time, (3) offer a well-hedged solution that is robust under the range of ways the hurricane might evolve, and (4) leverage the substantial value of increasing information (or decreasing degree of uncertainty) over the course of a hurricane event. A case study for Hurricane Isabel (2003) in eastern North Carolina is presented to demonstrate how the framework is applied, the type of results it can provide, and how it compares to available methods of a single scenario deterministic analysis and a two-stage stochastic program. © 2018 Society for Risk Analysis.

  6. Environmental Assessment of Possible Future Waste Management Scenarios

    Directory of Open Access Journals (Sweden)

    Yevgeniya Arushanyan

    2017-02-01

    Full Text Available Waste management has developed in many countries and will continue to do so. Changes towards increased recovery of resources in order to meet climate targets and for society to transition to a circular economy are important driving forces. Scenarios are important tools for planning and assessing possible future developments and policies. This paper presents a comprehensive life cycle assessment (LCA model for environmental assessments of scenarios and waste management policy instruments. It is unique by including almost all waste flows in a country and also allow for including waste prevention. The results show that the environmental impacts from future waste management scenarios in Sweden can differ a lot. Waste management will continue to contribute with environmental benefits, but less so in the more sustainable future scenarios, since the surrounding energy and transportation systems will be less polluting and also because less waste will be produced. Valuation results indicate that climate change, human toxicity and resource depletion are the most important environmental impact categories for the Swedish waste management system. Emissions of fossil CO2 from waste incineration will continue to be a major source of environmental impacts in these scenarios. The model is used for analyzing environmental impacts of several policy instruments including weight based collection fee, incineration tax, a resource tax and inclusion of waste in a green electricity certification system. The effect of the studied policy instruments in isolation are in most cases limited, suggesting that stronger policy instruments as well as combinations are necessary to reach policy goals as set out in for example the EU action plan on circular economy.

  7. A Methodology to Assess UrbanSim Scenarios

    Science.gov (United States)

    2012-09-01

    reconfigurable modules of video , game-based scenarios, digital tutors, and assessments tailored to learners. They incorporate the use of social...deeper levels for student decisions, it becomes increasingly more problematic to verify the desired underlying pedagogy is present (Wang et al...training impact of the training videos associated with the UrbanSim training package. The research team found that students that watched and implemented

  8. Integrating Future Land Use Scenarios to Evaluate the Spatio-Temporal Dynamics of Landscape Ecological Security

    Directory of Open Access Journals (Sweden)

    Yi Lu

    2016-11-01

    Full Text Available Urban ecological security is the basic principle of national ecological security. However, analyses of the spatial and temporal dynamics of ecological security remain limited, especially those that consider different scenarios of urban development. In this study, an integrated method is proposed that combines the Conversion of Land Use and its Effects (CLUE-S model with the Pressure–State–Response (P-S-R framework to assess landscape ecological security (LES in Huangshan City, China under two scenarios. Our results suggest the following conclusions: (1 the spatial and temporal dynamics of ecological security are closely related to the urbanization process; (2 although the average values of landscape ecological security are similar under different scenarios, the areas of relatively high security levels vary considerably; and (3 spatial heterogeneity in ecological security exists between different districts and counties, and the city center and its vicinity may face relatively serious declines in ecological security in the future. Overall, the proposed method not only illustrates the spatio-temporal dynamics of landscape ecological security under different scenarios but also reveals the anthropogenic effects on ecosystems by differentiating between causes, effects, and human responses at the landscape scale. This information is of great significance to decision-makers for future urban planning and management.

  9. Assessment of environmental impacts following alternative agricultural policy scenarios.

    Science.gov (United States)

    Bárlund, I; Lehtonen, H; Tattari, S

    2005-01-01

    Abstract Finnish agriculture is likely to undergo major changes in the near and intermediate future. The ifuture policy context can be examined at a general level by strategic scenario building. Computer-based modelling in combination with agricultural policy scenarios can in turn create a basis for the assessments of changes in environmental quality following possible changes in Finnish agriculture. The analysis of economic consequences is based on the DREMFIA model, which is applied to study effects of various agricultural policies on land use, animal production, and farmers' income. The model is suitable for an impact analysis covering an extended time span--here up to the year 2015. The changes in land use, obtained with the DREMFIA model assuming rational economic behaviour, form the basis when evaluating environmental impacts of different agricultural policies. The environmental impact assessment is performed using the field scale nutrient transport model ICECREAM. The modelled variables are nitrogen and phosphorus losses in surface runoff and percolation. In this paper the modelling strategy will be presented and highlighted using two case study catchments with varying environmental conditions and land use as an example. In addition, the paper identifies issues arising when connecting policy scenarios with impact modelling.

  10. An inquiry into the potential of scenario analysis for dealing with uncertainty in strategic environmental assessment in China

    International Nuclear Information System (INIS)

    Zhu Zhixi; Bai, Hongtao; Xu He; Zhu Tan

    2011-01-01

    Strategic environmental assessment (SEA) inherently needs to address greater levels of uncertainty in the formulation and implementation processes of strategic decisions, compared with project environmental impact assessment. The range of uncertainties includes internal and external factors of the complex system that is concerned in the strategy. Scenario analysis is increasingly being used to cope with uncertainty in SEA. Following a brief introduction of scenarios and scenario analysis, this paper examines the rationale for scenario analysis in SEA in the context of China. The state of the art associated with scenario analysis applied to SEA in China was reviewed through four SEA case analyses. Lessons learned from these cases indicated the word 'scenario' appears to be abused and the scenario-based methods appear to be misused due to the lack of understanding of an uncertain future and scenario analysis. However, good experiences were also drawn on, regarding how to integrate scenario analysis into the SEA process in China, how to cope with driving forces including uncertainties, how to combine qualitative scenario storylines with quantitative impact predictions, and how to conduct assessments and propose recommendations based on scenarios. Additionally, the ways to improve the application of this tool in SEA were suggested. We concluded by calling for further methodological research on this issue and more practices.

  11. Transport project evaluation: feasibility risk assessment and scenario forecasting

    DEFF Research Database (Denmark)

    Salling, Kim Bang; Leleur, Steen

    2017-01-01

    This paper presents a new approach to transport project assessment in terms of feasibility risk assessment and reference class forecasting. Conventionally, transport project assessment is based upon a Cost-Benefit Analysis (CBA) where evaluation criteria such as Benefit Cost Ratios (BCR...... on the preliminary construction cost estimates. Hereafter, a quantitative risk analysis is provided making use of Monte Carlo simulation. This approach facilitates random input parameters based upon reference class forecasting, hence, a parameter data fit has been performed in order to obtain validated probability...... Scenario Forecasting (RSF) frame. The RSF is anchored in the cost-benefit analysis; thus, it provides decision-makers with a quantitative mean of assessing the transport infrastructure project. First, the RSF method introduces uncertainties within the CBA by applying Optimism Bias uplifts...

  12. FRAPCON-3: Integral assessment

    Energy Technology Data Exchange (ETDEWEB)

    Lanning, D.D.; Berna, G.A.; Berna, G.A.

    1997-12-01

    An integral assessment has been performed for the U.S. Nuclear Regulatory Commission by Pacific Northwest National Laboratory to quantify the predictive capabilities of FRAPCON-3, a steady-state fuel behavior code designed to analyze fuel behavior from beginning-of-life to burnup levels of 65 GWd/MTU. FRAPCON-3 code calculations are shown to compare satisfactorily to a pre-selected set of experimental data with steady-state operating conditions. 30 refs., 27 figs., 18 tabs.

  13. Scenario simulation based assessment of subsurface energy storage

    Science.gov (United States)

    Beyer, C.; Bauer, S.; Dahmke, A.

    2014-12-01

    Energy production from renewable sources such as solar or wind power is characterized by temporally varying power supply. The politically intended transition towards renewable energies in Germany („Energiewende") hence requires the installation of energy storage technologies to compensate for the fluctuating production. In this context, subsurface energy storage represents a viable option due to large potential storage capacities and the wide prevalence of suited geological formations. Technologies for subsurface energy storage comprise cavern or deep porous media storage of synthetic hydrogen or methane from electrolysis and methanization, or compressed air, as well as heat storage in shallow or moderately deep porous formations. Pressure build-up, fluid displacement or temperature changes induced by such operations may affect local and regional groundwater flow, geomechanical behavior, groundwater geochemistry and microbiology. Moreover, subsurface energy storage may interact and possibly be in conflict with other "uses" like drinking water abstraction or ecological goods and functions. An utilization of the subsurface for energy storage therefore requires an adequate system and process understanding for the evaluation and assessment of possible impacts of specific storage operations on other types of subsurface use, the affected environment and protected entities. This contribution presents the framework of the ANGUS+ project, in which tools and methods are developed for these types of assessments. Synthetic but still realistic scenarios of geological energy storage are derived and parameterized for representative North German storage sites by data acquisition and evaluation, and experimental work. Coupled numerical hydraulic, thermal, mechanical and reactive transport (THMC) simulation tools are developed and applied to simulate the energy storage and subsurface usage scenarios, which are analyzed for an assessment and generalization of the imposed THMC

  14. Methodological progress in the development of scenarios for ENRESA-2000 Performance assessment exercise

    International Nuclear Information System (INIS)

    Cortes Martin, A.

    2000-01-01

    ENRESA is carrying out a new safety assessment exercise for a deep geological spent fuel disposal facility located in granite, known as ENRESA-2000. One of the main objectives of this safety analysis is the integration and implementation of all R and D studies performed to date by ENRESA, as well as the identification of those aspects of the assessment which require further investigation. One of the main activities of this exercise is the selection and development of the scenarios to be quantitatively analysed during the assessment, where a scenario is defined as a sufficient number of FEPs (ie relevant features, events and processes) as well as their influence relationships, which explain the behaviour of the disposal system. As a result of these three methods, a definitive list of FEPs will be obtained for the ENRESA-2000 exercise. Once grouped into scenarios, these FEPs will be used to model and calculate consequences. This process of generation and development of scenarios for the ENRESA-2000 performance assessment exercise is presented in this paper. (Author)

  15. Integrated scenarios of regional development in Ceará and Piauí

    NARCIS (Netherlands)

    Döll, Petra; Krol, Martinus S.; Fuhr, Dagmar; Gaiser, T.; Krol, M.S; Frischkorn, H.; de Araújo, J.C.

    2003-01-01

    Scenarios of the future are an important tool for supporting sustainability-oriented regional planning. To assist regional planning in two federal states in semi-arid Northeastern Brazil, Ceará and Piauí, we developed integrated qualitative-quantitative scenarios which show potential developments of

  16. Integrated Scenarios of Regional Development in Two Semi-Arid States of North-Eastern Brazil

    NARCIS (Netherlands)

    Döll, Petra; Krol, Martinus S.

    2002-01-01

    Scenario analysis of the future is an important tool for supporting sustainability-oriented regional planning. To assist regional planning in two federal states in semi-arid North-eastern Brazil, Ceará and Piauí, we developed integrated qualitative¿quantitative scenarios that show potential

  17. Scenario Methodology for Modelling of Future Landscape Developments as Basis for Assessing Ecosystem Services

    Directory of Open Access Journals (Sweden)

    Matthias Rosenberg

    2014-04-01

    Full Text Available The ecosystems of our intensively used European landscapes produce a variety of natural goods and services for the benefit of humankind, and secure the basics and quality of life. Because these ecosystems are still undergoing fundamental changes, the interest of the society is to know more about future developments and their ecological impacts. To describe and analyze these changes, scenarios can be developed and an assessment of the ecological changes can be carried out subsequently. In the project „Landscape Saxony 2050“; a methodology for the construction of exploratory scenarios was worked out. The presented methodology provides a possibility to identify the driving forces (socio-cultural, economic and ecological conditions of the landscape development. It allows to indicate possible future paths which lead to a change of structures and processes in the landscape and can influence the capability to provide ecosystem services. One essential component of the applied technique is that an approach for the assessment of the effects of the landscape changes on ecosystem services is integrated into the developed scenario methodology. Another is, that the methodology is strong designed as participatory, i.e. stakeholders are integrated actively. The method is a seven phase model which provides the option for the integration of the stakeholders‘ participation at all levels of scenario development. The scenario framework was applied to the district of Görlitz, an area of 2100 sq km located at the eastern border of Germany. The region is affected by strong demographic as well as economic changes. The core issue focused on the examination of landscape change in terms of biodiversity. Together with stakeholders, a trend scenario and two alternative scenarios were developed. The changes of the landscape structure are represented in story lines, maps and tables. On basis of the driving forces of the issue areas „cultural / social values“ and

  18. Nuclear spent fuel management scenarios. Status and assessment report

    International Nuclear Information System (INIS)

    Dufek, J.; Arzhanov, V.; Gudowski, W.

    2006-06-01

    The strategy for management of spent nuclear fuel from the Swedish nuclear power programme is interim storage for cooling and decay for about 30 years followed by direct disposal of the fuel in a geologic repository. In various contexts it is of interest to compare this strategy with other strategies that might be available in the future as a result of ongoing research and development. In particular partitioning and transmutation is one such strategy that is subject to considerable R and D-efforts within the European Union and in other countries with large nuclear programmes. To facilitate such comparisons for the Swedish situation, with a planned phase out of the nuclear power programme, SKB has asked the team at Royal Inst. of Technology to describe and explore some scenarios that might be applied to the Swedish programme. The results of this study are presented in this report. The following scenarios were studied by the help of a specially developed computer programme: Phase out by 2025 with direct disposal. Burning plutonium and minor actinides as MOX in BWR. Burning plutonium and minor actinides as MOX in PWR. Burning plutonium and minor actinides in ADS. Combined LWR-MOX plus ADS. For the different scenarios nuclide inventories, waste amounts, costs, additional electricity production etc have been assessed. As a general conclusion it was found that BWR is more efficient for burning plutonium in MOX fuel than PWR. The difference is approximately 10%. Furthermore the BWR produces about 10% less americium inventory. An ADS reactor park can theoretically in an ideal case burn (transmute) 99% of the transuranium isotopes. The duration of such a scenario heavily depends on the interim time needed for cooling the spent fuel before reprocessing. Assuming 10 years for cooling of nuclear fuel from ADS, the duration will be at least 200 years under optimistic technical assumptions. The development and use of advanced pyro-processing with an interim cooling time of only

  19. Nuclear spent fuel management scenarios. Status and assessment report

    Energy Technology Data Exchange (ETDEWEB)

    Dufek, J.; Arzhanov, V.; Gudowski, W. [Royal Inst. of Technology, Stockholm (Sweden). Dept. of Nuclear and Reactor Physics

    2006-06-15

    The strategy for management of spent nuclear fuel from the Swedish nuclear power programme is interim storage for cooling and decay for about 30 years followed by direct disposal of the fuel in a geologic repository. In various contexts it is of interest to compare this strategy with other strategies that might be available in the future as a result of ongoing research and development. In particular partitioning and transmutation is one such strategy that is subject to considerable R and D-efforts within the European Union and in other countries with large nuclear programmes. To facilitate such comparisons for the Swedish situation, with a planned phase out of the nuclear power programme, SKB has asked the team at Royal Inst. of Technology to describe and explore some scenarios that might be applied to the Swedish programme. The results of this study are presented in this report. The following scenarios were studied by the help of a specially developed computer programme: Phase out by 2025 with direct disposal. Burning plutonium and minor actinides as MOX in BWR. Burning plutonium and minor actinides as MOX in PWR. Burning plutonium and minor actinides in ADS. Combined LWR-MOX plus ADS. For the different scenarios nuclide inventories, waste amounts, costs, additional electricity production etc have been assessed. As a general conclusion it was found that BWR is more efficient for burning plutonium in MOX fuel than PWR. The difference is approximately 10%. Furthermore the BWR produces about 10% less americium inventory. An ADS reactor park can theoretically in an ideal case burn (transmute) 99% of the transuranium isotopes. The duration of such a scenario heavily depends on the interim time needed for cooling the spent fuel before reprocessing. Assuming 10 years for cooling of nuclear fuel from ADS, the duration will be at least 200 years under optimistic technical assumptions. The development and use of advanced pyro-processing with an interim cooling time of only

  20. Care and pedagogical production: integration of Public Health System scenarios

    Directory of Open Access Journals (Sweden)

    Túlio Batista Franco

    2007-01-01

    Full Text Available Throughout Brazilian Public Health System's (Centralized Health System - SUS construction history there has been a reasonable investment in the education for the sector. However, it has been frequently noticed by health professionals and managers the fact that this investment in educational programs has not converted into change of healthcare practices. Assuming that education can be used as a tool for changes in health, the text suggests that the pedagogical practices should be directed towards the production of individuals implied with the care production. Hence it proposes to work on a field of subjectivity in addition to cognition. This work reveals the management of the Brazilian public health system and its flows of permanent education, focusing "micromanagement" to think about the context on which they structuralize the diverse scenarios of care production, treating them as Pedagogical Production Units where it would be possible to develop entailed educational methodologies to a general idea of permanent education in health.

  1. CyberCIEGE Scenario Illustrating Integrity Risks to a Military-Like Facility

    National Research Council Canada - National Science Library

    Fielk, Klaus

    2004-01-01

    .... This thesis asked if a Scenario Definition File (SDF) for the CyberCIEGE game could be developed to educate and train players in Information Assurance on matters related to information integrity in a networking environment...

  2. Integrated municipal solid waste scenario model using advanced pretreatment and waste to energy processes

    International Nuclear Information System (INIS)

    Ionescu, Gabriela; Rada, Elena Cristina; Ragazzi, Marco; Mărculescu, Cosmin; Badea, Adrian; Apostol, Tiberiu

    2013-01-01

    Highlights: • Appropriate solution for MSW management in new and future EU countries. • Decrease of landfill disposal applying an Integrated MSW approach. • Technological impediments and environmental assessment. - Abstract: In this paper an Integrated Municipal Solid Waste scenario model (IMSW-SM) with a potential practical application in the waste management sector is analyzed. The model takes into account quantification and characterization of Municipal Solid Waste (MSW) streams from different sources, selective collection (SC), advanced mechanical sorting, material recovery and advanced thermal treatment. The paper provides a unique chain of advanced waste pretreatment stages of fully commingled waste streams, leading to an original set of suggestions and future contributions to a sustainable IMSWS, taking into account real data and EU principles. The selection of the input data was made on MSW management real case studies from two European regions. Four scenarios were developed varying mainly SC strategies and thermal treatment options. The results offer useful directions for decision makers in order to calibrate modern strategies in different realities

  3. An integrated theory of causal scenarios and evidential arguments

    NARCIS (Netherlands)

    Bex, F.J.

    2015-01-01

    In the process of proof alternative stories that explain 'what happened' in a case are tested using arguments based on evidence. Building on the author's earlier hybrid theory, this paper presents a formal theory that combines causal stories and evidential arguments, further integrating the

  4. Human scenarios for the screening assessment. Columbia River Comprehensive Impact Assessment

    International Nuclear Information System (INIS)

    Napier, B.A.; Harper, B.L.; Lane, N.K.; Strenge, D.L.; Spivey, R.B.

    1996-03-01

    Because of past nuclear production operations along the Columbia River, there is intense public and tribal interest in assessing any residual Hanford Site related contamination along the river from the Hanford Reach to the Pacific Ocean. The Columbia River Impact Assessment (CRCIA) was proposed to address these concerns. The assessment of the Columbia River is being conducted in phases. The initial phase is a screening assessment of risk, which addresses current environmental conditions for a range of potential uses. One component of the screening assessment estimates the risk from contaminants in the Columbia River to humans. Because humans affected by the Columbia river are involved in a wide range of activities, various scenarios have been developed on which to base the risk assessments. The scenarios illustrate the range of activities possible by members of the public coming in contact with the Columbia River so that the impact of contaminants in the river on human health can be assessed. Each scenario illustrates particular activity patterns by a specific group. Risk will be assessed at the screening level for each scenario. This report defines the scenarios and the exposure factors that will be the basis for estimating the potential range of risk to human health from Hanford-derived radioactive as well as non-radioactive contaminants associated with the Columbia River

  5. Human scenarios for the screening assessment. Columbia River Comprehensive Impact Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Napier, B.A.; Harper, B.L.; Lane, N.K.; Strenge, D.L.; Spivey, R.B.

    1996-03-01

    Because of past nuclear production operations along the Columbia River, there is intense public and tribal interest in assessing any residual Hanford Site related contamination along the river from the Hanford Reach to the Pacific Ocean. The Columbia River Impact Assessment (CRCIA) was proposed to address these concerns. The assessment of the Columbia River is being conducted in phases. The initial phase is a screening assessment of risk, which addresses current environmental conditions for a range of potential uses. One component of the screening assessment estimates the risk from contaminants in the Columbia River to humans. Because humans affected by the Columbia river are involved in a wide range of activities, various scenarios have been developed on which to base the risk assessments. The scenarios illustrate the range of activities possible by members of the public coming in contact with the Columbia River so that the impact of contaminants in the river on human health can be assessed. Each scenario illustrates particular activity patterns by a specific group. Risk will be assessed at the screening level for each scenario. This report defines the scenarios and the exposure factors that will be the basis for estimating the potential range of risk to human health from Hanford-derived radioactive as well as non-radioactive contaminants associated with the Columbia River.

  6. Developing scenarios to assess future landslide risks: a model-based approach applied to mountainous regions

    Science.gov (United States)

    Vacquie, Laure; Houet, Thomas

    2016-04-01

    In the last century, European mountain landscapes have experienced significant transformations. Natural and anthropogenic changes, climate changes, touristic and industrial development, socio-economic interactions, and their implications in terms of LUCC (land use and land cover changes) have directly influenced the spatial organization and vulnerability of mountain landscapes. This study is conducted as part of the SAMCO project founded by the French National Science Agency (ANR). It aims at developing a methodological approach, combining various tools, modelling platforms and methods, to identify vulnerable regions to landslide hazards accounting for futures LUCC. It presents an integrated approach combining participative scenarios and a LULC changes simulation models to assess the combined effects of LUCC and climate change on landslide risks in the Cauterets valley (French Pyrenees Mountains) up to 2100. Through vulnerability and risk mapping, the objective is to gather information to support landscape planning and implement land use strategies with local stakeholders for risk management. Four contrasting scenarios are developed and exhibit contrasting trajectories of socio-economic development. Prospective scenarios are based on national and international socio-economic contexts relying on existing assessment reports. The methodological approach integrates knowledge from local stakeholders to refine each scenario during their construction and to reinforce their plausibility and relevance by accounting for local specificities, e.g. logging and pastoral activities, touristic development, urban planning, etc. A process-based model, the Forecasting Scenarios for Mountains (ForeSceM) model, developed on the Dinamica Ego modelling platform is used to spatially allocate futures LUCC for each prospective scenario. Concurrently, a spatial decision support tool, i.e. the SYLVACCESS model, is used to identify accessible areas for forestry in scenario projecting logging

  7. Using Advanced Data Mining And Integration In Environmental Prediction Scenarios

    Directory of Open Access Journals (Sweden)

    Habala Ondrej

    2012-01-01

    Full Text Available We present one of the meteorological and hydrological experiments performed in the FP7 project ADMIRE. It serves as an experimental platform for hydrologists, and we have used it also as a testing platform for a suite of advanced data integration and data mining (DMI tools, developed within ADMIRE. The idea of ADMIRE is to develop an advanced DMI platform accessible even to users who are not familiar with data mining techniques. To this end, we have designed a novel DMI architecture, supported by a set of software tools, managed by DMI process descriptions written in a specialized high-level DMI language called DISPEL, and controlled via several different user interfaces, each performing a different set of tasks and targeting different user group.

  8. From Modelling to Execution of Enterprise Integration Scenarios: The GENIUS Tool

    Science.gov (United States)

    Scheibler, Thorsten; Leymann, Frank

    One of the predominant problems IT companies are facing today is Enterprise Application Integration (EAI). Most of the infrastructures built to tackle integration issues are proprietary because no standards exist for how to model, develop, and actually execute integration scenarios. EAI patterns gain importance for non-technical business users to ease and harmonize the development of EAI scenarios. These patterns describe recurring EAI challenges and propose possible solutions in an abstract way. Therefore, one can use those patterns to describe enterprise architectures in a technology neutral manner. However, patterns are documentation only used by developers and systems architects to decide how to implement an integration scenario manually. Thus, patterns are not theoretical thought to stand for artefacts that will immediately be executed. This paper presents a tool supporting a method how EAI patterns can be used to generate executable artefacts for various target platforms automatically using a model-driven development approach, hence turning patterns into something executable. Therefore, we introduce a continuous tool chain beginning at the design phase and ending in executing an integration solution in a completely automatically manner. For evaluation purposes we introduce a scenario demonstrating how the tool is utilized for modelling and actually executing an integration scenario.

  9. Scenario analysis for integrated water resources planning and management under uncertainty in the Zayandehrud river basin

    Science.gov (United States)

    Safavi, Hamid R.; Golmohammadi, Mohammad H.; Sandoval-Solis, Samuel

    2016-08-01

    The goal of this study is to develop and analyze three scenarios in the Zayandehrud river basin in Iran using a model already built and calibrated by Safavi et al. (2015) that has results for the baseline scenario. Results from the baseline scenario show that water demands will be supplied at the cost of depletion of surface and ground water resources, making this scenario undesirable and unsustainable. Supply Management, Demand Management, and Meta (supply and demand management) scenarios are the selected scenarios in this study. They are to be developed and declared into the Zayandehrud model to assess and evaluate the imminent status of the basin. Certain strategies will be employed for this purpose to improve and rectify the current management policies. The five performance criteria of time-based and volumetric reliability, resilience, vulnerability, and maximum deficit will be employed in the process of scenario analysis and evaluation. The results obtained from the performance criteria will be summed up into a so-called 'Water Resources Sustainability Index' to facilitate comparison among the likely trade-offs. Uncertainties arising from historical data, management policies, rainfall-runoff model, demand priorities, and performance criteria are considered in the proposed conceptual framework and modeled by appropriate approaches. Results show that the Supply Management scenario can be used to improve upon the demand supply but that it has no tangible effects on the improvement of the resources in the study region. In this regard, the Demand Management scenario is found to be more effective than the water supply one although it still remains unacceptable. Results of the Meta scenario indicate that both the supply and demand management scenarios must be applied if the water resources are to be safeguarded against degradation and depletion. In other words, the supply management scenario is necessary but not adequate; rather, it must be coupled to the demand

  10. Integral risk assessment

    International Nuclear Information System (INIS)

    Chakraborty, S.; Yadigaroglu, G.

    1991-01-01

    The series of lectures which forms the basis of this book and took place in the winter of 1989/90 at the ETH in Zuerich were held for the purpose of discussing the stage of development of our system of ethics in view of the extremely fast pace of technological progress and the risks which accompany it. Legal, psychological and political aspects of the problem were examined, but the emphasis was placed on ethical aspects. The effects which are examined in conventional risk analyses can be considered as a part of the ethical and social aspects involved, and in turn, the consideration of ethical and social aspects can be viewed as an extension of the conventional form of risk analysis. In any case, among risk experts, the significance of ethical and social factors is uncontested, especially as regards activities which can have far-reaching repurcussions. Some objective difficulties interfere with this goal, however: - No generally acknowledged set of ethical values exists. - Cultural influences and personal motives can interfere. - Normally a risk assessment is carried out in reference to individual facilities and within a small, clearly defined framework. Under certain circumstances, generalizations which are made for complete technological systems can lead to completely different conclusions. One contribution deals with integral views of the risks of atomic energy from an ethical and social perspective. (orig.) [de

  11. Fossil fuel depletion and socio-economic scenarios: An integrated approach

    International Nuclear Information System (INIS)

    Capellán-Pérez, Iñigo; Mediavilla, Margarita; Castro, Carlos de; Carpintero, Óscar; Miguel, Luis Javier

    2014-01-01

    The progressive reduction of high-quality-easy-to-extract energy is a widely recognized and already ongoing process. Although depletion studies for individual fuels are relatively abundant, few of them offer a global perspective of all energy sources and their potential future developments, and even fewer include the demand of the socio-economic system. This paper presents an Economy-Energy-Environment model based on System Dynamics which integrates all those aspects: the physical restrictions (with peak estimations for oil, gas, coal and uranium), the techno-sustainable potential of renewable energy estimated by a novel top-down methodology, the socio-economic energy demands, the development of alternative technologies and the net CO 2 emissions. We confront our model with the basic assumptions of previous Global Environmental Assessment (GEA) studies. The results show that demand-driven evolution, as performed in the past, might be unfeasible: strong energy-supply scarcity is found in the next two decades, especially in the transportation sector before 2020. Electricity generation is unable to fulfill its demand in 2025–2040, and a large expansion of electric renewable energies move us close to their limits. In order to find achievable scenarios, we are obliged to set hypotheses which are hardly used in GEA scenarios, such as zero or negative economic growth. - Highlights: • The paper presents and describes a new Energy–Economy–Environment global model. • GEA scenario dynamics have the potential to lead us to energy resource scarcity in the next 2 decades. • Global forecasts of international agencies show inconsistency in energy constraints. • Renewable energies are only partially able to replace fossil fuels depletion. • Climate change still reaches dangerous dimensions

  12. Sugeno integral ranking of release scenarios in a low and intermediate waste repository

    International Nuclear Information System (INIS)

    Kim, S. Ho; Kim, Tae Woon; Ha, Jae Joo

    2004-01-01

    In the present study, a multi criteria decision-making (MCDM) problem of ranking of important radionuclide release scenarios in a low and intermediate radioactive waste repository is to treat on the basis of λ-fuzzy measures and Sugeno integral. Ranking of important scenarios can lead to the provision of more effective safety measure in a design stage of the repository. The ranking is determined by a relative degree of appropriateness of scenario alternatives. To demonstrate a validation of the proposed approach to ranking of release scenarios, results of the previous AHP study are used and compared with them of the present SIAHP approach. Since the AHP approach uses importance weight based on additive probability measures, the interaction among criteria is ignored. The comparison of scenarios ranking obtained from these two approaches enables us to figure out the effect of different models for interaction among criteria

  13. Integrated Adaptive Scenarios for Ariculture: Synergies and Tradeoffs.

    Science.gov (United States)

    Malek, K.; Rajagopalan, K.; Adam, J. C.; Brady, M.; Stockle, C.; Liu, M.; Kruger, C. E.

    2017-12-01

    A wide variety of factors can drive adaptation of the agricultural production sector in response to climate change. Warming and increased growing season length can lead to adoption of newer plant varieties as well as increases in double cropping systems. Changes in expectations of drought frequency or economic factors could lead to adoption of new technology (such as irrigation technology or water trading systems) or crop choices with a view of reducing farm-level risk, and these choices can result in unintended system wide effects. These are all examples of producer adaptation decisions made with a long-term (multiple decades) view. In addition, producers respond to short-term (current year) shocks - such as drought events - through management strategies that include deficit irrigation, fallowing, nutrient management, and engaging in water trading. The effects of these short- and long-term decisions are not independent, and can drive or be driven by the other. For example, investment in new irrigation systems (long-term) can be driven by expectations of short-term crop productivity losses in drought years. Similarly, the capacity to manage for short-term shocks will depend on crop type and variety as well as adopted irrigation technologies. Our overarching objective is to understand the synergies and tradeoffs that exist when combining three potential long-term adaptation strategies and two short-term adaptation strategies, with a view of understanding the synergies and tradeoffs. We apply the integrated crop-hydrology modeling framework VIC-CropSyst, along with the water management module Yakima RiverWare to address these questions over our test area, the Yakima River basin. We consider adoption of a) more efficient irrigation technologies, slower growing crop varieties, and increased prevalence of double cropping systems as long-term adaptation strategies; and b) fallowing and deficit irrigation as short-term responses to droughts. We evaluate the individual and

  14. Sensitivity assessment of fuel performance codes for LOCA accident scenario

    Energy Technology Data Exchange (ETDEWEB)

    Abe, Alfredo; Gomes, Daniel; Silva, Antonio Teixeira e; Muniz, Rafael O.R. [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil); Giovedi, Claudia; Martins, Marcelo, E-mail: ayabe@ipen.br, E-mail: claudia.giovedi@labrisco.usp.br [Universidade de Sao Paulo (LABRISCO/USP), Sao Paulo, SP (Brazil). Lab. de Análise, Avaliação e Gerenciamento de Risco

    2017-07-01

    FRAPCON code predicts fuel rod performance in LWR (Light Water Reactor) by modeling fuel responses under normal operating conditions and anticipated operational occurrences; FRAPTRAN code is applied for fuel transient under fast transient and accident conditions. The codes are well known and applied for different purposes and one of the use is to address sensitivity analysis considering fuel design parameters associated to fabrication, moreover can address the effect of physical models bias. The objective of this work was to perform an assessment of fuel manufacturing parameters tolerances and fuel models bias using FRAPCON and FRAPTRAN codes for Loss of Coolant Accident (LOCA) scenario. The preliminary analysis considered direct approach taken into account most relevant manufacturing tolerances (lower and upper bounds) related to design parameters and physical models bias without considering their statistical distribution. The simulations were carried out using the data available in the open literature related to the series of LOCA experiment performed at the Halden reactor (specifically IFA-650.5). The manufacturing tolerances associated to design parameters considered in this paper were: enrichment, cladding thickness, pellet diameter, pellet density, and filling gas pressure. The physical models considered were: fuel thermal expansion, fission gas release, fuel swelling, irradiation creep, cladding thermal expansion, cladding corrosion, and cladding hydrogen pickup. The results obtained from sensitivity analysis addressed the impact of manufacturing tolerances and physical models in the fuel cladding burst time observed for the IFA-650.5 experiment. (author)

  15. Sensitivity assessment of fuel performance codes for LOCA accident scenario

    International Nuclear Information System (INIS)

    Abe, Alfredo; Gomes, Daniel; Silva, Antonio Teixeira e; Muniz, Rafael O.R.; Giovedi, Claudia; Martins, Marcelo

    2017-01-01

    FRAPCON code predicts fuel rod performance in LWR (Light Water Reactor) by modeling fuel responses under normal operating conditions and anticipated operational occurrences; FRAPTRAN code is applied for fuel transient under fast transient and accident conditions. The codes are well known and applied for different purposes and one of the use is to address sensitivity analysis considering fuel design parameters associated to fabrication, moreover can address the effect of physical models bias. The objective of this work was to perform an assessment of fuel manufacturing parameters tolerances and fuel models bias using FRAPCON and FRAPTRAN codes for Loss of Coolant Accident (LOCA) scenario. The preliminary analysis considered direct approach taken into account most relevant manufacturing tolerances (lower and upper bounds) related to design parameters and physical models bias without considering their statistical distribution. The simulations were carried out using the data available in the open literature related to the series of LOCA experiment performed at the Halden reactor (specifically IFA-650.5). The manufacturing tolerances associated to design parameters considered in this paper were: enrichment, cladding thickness, pellet diameter, pellet density, and filling gas pressure. The physical models considered were: fuel thermal expansion, fission gas release, fuel swelling, irradiation creep, cladding thermal expansion, cladding corrosion, and cladding hydrogen pickup. The results obtained from sensitivity analysis addressed the impact of manufacturing tolerances and physical models in the fuel cladding burst time observed for the IFA-650.5 experiment. (author)

  16. National Acid Precipitation Assessment Program: 1990 Integrated Assessment report

    International Nuclear Information System (INIS)

    1991-11-01

    The document, the 'Integrated Assessment,' is a summary of the causes and effects of acidic deposition and a comparison of the costs and effectiveness of alternative emission control scenarios. In developing the 'Integrated Assessment,' it was NAPAP's goal to produce a structured compilation of policy-relevant technical information. The Integrated Assessment is based on findings and data from a series of twenty-seven State-of-Science/Technology Reports (SOS/T) on acidic deposition published by NAPAP in 1990. The scope of the documents includes: (1) emissions, atmospheric processes and deposition; (2) effects on surface waters, forests, agricultural crops, exposed materials, human health, and visibility; and (3) control technologies, future emissions, and effects valuation

  17. Assessing climate change impacts, benefits of mitigation, and uncertainties on major global forest regions under multiple socioeconomic and emissions scenarios

    Science.gov (United States)

    John B Kim; Erwan Monier; Brent Sohngen; G Stephen Pitts; Ray Drapek; James McFarland; Sara Ohrel; Jefferson Cole

    2016-01-01

    We analyze a set of simulations to assess the impact of climate change on global forests where MC2 dynamic global vegetation model (DGVM) was run with climate simulations from the MIT Integrated Global System Model-Community Atmosphere Model (IGSM-CAM) modeling framework. The core study relies on an ensemble of climate simulations under two emissions scenarios: a...

  18. Power generation scenarios for Nigeria: An environmental and cost assessment

    International Nuclear Information System (INIS)

    Gujba, H.; Mulugetta, Y.; Azapagic, A.

    2011-01-01

    Exploratory scenarios for the power sector in Nigeria are analysed in this paper using possible pathways within the Nigerian context and then compared against the Government's power expansion plan in the short to medium term. They include two fossil-fuel (FF and CCGT) and two sustainable-development-driven scenarios (SD1 and SD2). The results from the FF scenarios indicate this is the preferred outcome if the aim is to expand electricity access at the lowest capital costs. However, the annual costs and environmental impacts increase significantly as a consequence. The SD1 scenario, characterised by increased penetration of renewables, leads to a reduction of a wide range of environmental impacts while increasing the annual costs slightly. The SD2 scenario, also with an increased share of renewables, is preferred if the aim is to reduce GHG emissions; however, this comes at an increased annual cost. Both the SD1 and SD2 scenarios also show significant increases in the capital investment compared to the Government's plans. These results can be used to help inform future policy in the Nigerian electricity sector by showing explicitly the range of possible trade-offs between environmental impacts and economic costs both in the short and long terms. - Research Highlights: →The power sector in Nigeria is set to grow significantly in near future. →Power sector scenarios are constructed and studied using LCA and economic analysis methods and then compared against the Government's plans. →These include two fossil-fuel and two sustainable-development-driven scenarios. →The results explicitly show the trade-offs between environmental impacts and costs. →Following the fossil fuel paths will reduce capital costs but increase environmental impacts. The renewable energy paths will reduce some environmental impacts but increase the capital costs.

  19. Towards realistic Holocene land cover scenarios: integration of archaeological, palynological and geomorphological records and comparison to global land cover scenarios.

    Science.gov (United States)

    De Brue, Hanne; Verstraeten, Gert; Broothaerts, Nils; Notebaert, Bastiaan

    2016-04-01

    Accurate and spatially explicit landscape reconstructions for distinct time periods in human history are essential for the quantification of the effect of anthropogenic land cover changes on, e.g., global biogeochemical cycles, ecology, and geomorphic processes, and to improve our understanding of interaction between humans and the environment in general. A long-term perspective covering Mid and Late Holocene land use changes is recommended in this context, as it provides a baseline to evaluate human impact in more recent periods. Previous efforts to assess the evolution and intensity of agricultural land cover in past centuries or millennia have predominantly focused on palynological records. An increasing number of quantitative techniques has been developed during the last two decades to transfer palynological data to land cover estimates. However, these techniques have to deal with equifinality issues and, furthermore, do not sufficiently allow to reconstruct spatial patterns of past land cover. On the other hand, several continental and global databases of historical anthropogenic land cover changes based on estimates of global population and the required agricultural land per capita have been developed in the past decennium. However, at such long temporal and spatial scales, reconstruction of past anthropogenic land cover intensities and spatial patterns necessarily involves many uncertainties and assumptions as well. Here, we present a novel approach that combines archaeological, palynological and geomorphological data for the Dijle catchment in the central Belgium Loess Belt in order to arrive at more realistic Holocene land cover histories. Multiple land cover scenarios (> 60.000) are constructed using probabilistic rules and used as input into a sediment delivery model (WaTEM/SEDEM). Model outcomes are confronted with a detailed geomorphic dataset on Holocene sediment fluxes and with REVEALS based estimates of vegetation cover using palynological data from

  20. Consequence Assessment for Potential Scenarios of Radiological Terrorists Events

    International Nuclear Information System (INIS)

    Shin, Hyeongki; Kim, Juyoul

    2007-01-01

    Radiological dispersal device (RDD) means any method used to deliberately disperse radioactive material to create terror or harm. Dirty bomb is an example of RDD, which usually consists of radioactive material and unconventional explosive. Dirty bomb was a problem long before September 11, 2001. In 1987, the Iraqi government tested a one-ton radiological bomb. The Iraqi tests confirmed that a dirty bomb is not effective as weapons of mass destruction (WMD) and that its main value is as a psychological weapon. In 1995, Chechen rebels buried a dirty bomb in a park in Moscow threatening to detonate one in the future if their demands were not met. Another good example of potential dirty bomb effects was an incident in Goiania, Brazil on September 18, 1987, where an orphaned medical source containing 1,375 Ci of Cs-137 resulted the death of four people and extensive environmental contamination. The purposes of radiological terrorists events are not to destroy or damage the target but to disperse radioactivity in the environment. They inflict panic on a public and economic damage by disruption of business. They also have influence on enormous clean-up costs by spreading radioactive contamination including secondary impacts on water supply reservoirs. Generally, two major long-term concerns following a RDD are human health and economic impacts. In this study, we developed potential scenarios of radiological terrorists events and performed their radiological consequence assessments in terms of total effective dose equivalent (TEDE), projected cumulative external and internal dose, and ground deposition of radioactivity

  1. Consequence Assessment for Potential Scenarios of Radiological Terrorists Events

    Energy Technology Data Exchange (ETDEWEB)

    Shin, Hyeongki [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of); Kim, Juyoul [Seoul National University, Seoul (Korea, Republic of)

    2007-07-01

    Radiological dispersal device (RDD) means any method used to deliberately disperse radioactive material to create terror or harm. Dirty bomb is an example of RDD, which usually consists of radioactive material and unconventional explosive. Dirty bomb was a problem long before September 11, 2001. In 1987, the Iraqi government tested a one-ton radiological bomb. The Iraqi tests confirmed that a dirty bomb is not effective as weapons of mass destruction (WMD) and that its main value is as a psychological weapon. In 1995, Chechen rebels buried a dirty bomb in a park in Moscow threatening to detonate one in the future if their demands were not met. Another good example of potential dirty bomb effects was an incident in Goiania, Brazil on September 18, 1987, where an orphaned medical source containing 1,375 Ci of Cs-137 resulted the death of four people and extensive environmental contamination. The purposes of radiological terrorists events are not to destroy or damage the target but to disperse radioactivity in the environment. They inflict panic on a public and economic damage by disruption of business. They also have influence on enormous clean-up costs by spreading radioactive contamination including secondary impacts on water supply reservoirs. Generally, two major long-term concerns following a RDD are human health and economic impacts. In this study, we developed potential scenarios of radiological terrorists events and performed their radiological consequence assessments in terms of total effective dose equivalent (TEDE), projected cumulative external and internal dose, and ground deposition of radioactivity.

  2. Integrating environmental and socioeconomic assessment

    International Nuclear Information System (INIS)

    Branch, K.M.; Cluett, C.; Page, T.L.

    1987-01-01

    Since the passage of the National Environmental Policy Act (NEPA) in 1969, considerable scientific and regulatory attention has been given to the preparation of environmental impact assessments. Part of this attention has been directed to definition of the proper scope of an environmental assessment and to debate about how the ''human environment'' should be addressed. This debate continues, and is reflected in the ongoing evolution of the definition of and relationship between the ''environmental'' and ''socioeconomic'' components of an integrated environmental impact assessment. This paper discusses the need for close integration between the environmental and socioeconomic assessment efforts and examines some of the benefits and difficulties of achieving this integration

  3. Scenario Analysis for the Safety Assessment of Nuclear Waste Repositories: A Critical Review.

    Science.gov (United States)

    Tosoni, Edoardo; Salo, Ahti; Zio, Enrico

    2018-04-01

    A major challenge in scenario analysis for the safety assessment of nuclear waste repositories pertains to the comprehensiveness of the set of scenarios selected for assessing the safety of the repository. Motivated by this challenge, we discuss the aspects of scenario analysis relevant to comprehensiveness. Specifically, we note that (1) it is necessary to make it clear why scenarios usually focus on a restricted set of features, events, and processes; (2) there is not yet consensus on the interpretation of comprehensiveness for guiding the generation of scenarios; and (3) there is a need for sound approaches to the treatment of epistemic uncertainties. © 2017 Society for Risk Analysis.

  4. Data supporting the comparative life cycle assessment of different municipal solid waste management scenarios

    Science.gov (United States)

    Ali Rajaeifar, Mohammad; Tabatabaei, Meisam; Ghanavati, Hossein

    2015-01-01

    Environmental assessment of municipal solid waste (MSW) management scenarios would help to select eco-friendly scenarios. In this study, the inventory data in support of life cycle assessment of different MSW are presented. The scenarios were defined as: anaerobic digestion (AD, Sc-0), landfilling combined with composting (Sc-1), incineration (Sc-2), incineration combined with composting (Sc-3), and AD combined with incineration (Sc-4). The current article contains flowcharts of the different scenarios. Additionally, six supplementary files including inventory data on the different scenarios, data on the different damage assessment categories, normalization, and single scores are presented (Supplementary files 1–6). The analysis of the different scenarios revealed that the most eco-friendly scenario to be implemented in the future would be the combination of AD and incineration (Sc-4). PMID:26217743

  5. Data supporting the comparative life cycle assessment of different municipal solid waste management scenarios

    Directory of Open Access Journals (Sweden)

    Mohammad Ali Rajaeifar

    2015-06-01

    Full Text Available Environmental assessment of municipal solid waste (MSW management scenarios would help to select eco-friendly scenarios. In this study, the inventory data in support of life cycle assessment of different MSW are presented. The scenarios were defined as: anaerobic digestion (AD, Sc-0, landfilling combined with composting (Sc-1, incineration (Sc-2, incineration combined with composting (Sc-3, and AD combined with incineration (Sc-4. The current article contains flowcharts of the different scenarios. Additionally, six supplementary files including inventory data on the different scenarios, data on the different damage assessment categories, normalization, and single scores are presented (Supplementary files 1–6. The analysis of the different scenarios revealed that the most eco-friendly scenario to be implemented in the future would be the combination of AD and incineration (Sc-4.

  6. Technology and Greenhouse Gas Emissions: An Integrated Scenario Analysis using the LBNL-NEMS model

    International Nuclear Information System (INIS)

    Koomey, J.G.; Latiner, S.; Markel, R.J.; Marnay, C.; Richey, R.C.

    1998-01-01

    This report describes an analysis of possible technology-based scenarios for the U.S. energy system that would result in both carbon savings and net economic benefits. We use a modified version of the Energy Information Administration's National Energy Modeling System (LBNL-NEMS) to assess the potential energy, carbon, and bill savings from a portfolio of carbon saving options. This analysis is based on technology resource potentials estimated in previous bottom-up studies, but it uses the integrated LBNL-NEMS framework to assess interactions and synergies among these options. The analysis in this paper builds on previous estimates of possible ''technology paths'' to investigate four major components of an aggressive greenhouse gas reduction strategy: (1) the large scale implementation of demand-side efficiency, comparable in scale to that presented in two recent policy studies on this topic; (2) a variety of ''alternative'' electricity supply-side options, including biomass cofiring, extension of the renewable production tax credit for wind, increased industrial cogeneration, and hydropower refurbishment. (3) the economic retirement of older and less efficient existing fossil-find power plants; and (4) a permit charge of $23 per metric ton of carbon (1996 $/t),l assuming that carbon trading is implemented in the US, and that the carbon permit charge equilibrates at this level. This level of carbon permit charge, as discussed later in the report, is in the likely range for the Clinton Administration's position on this topic

  7. Integrating Simulation Scenarios and Clinical Practices Guided by Concepts of Translational Medicine

    Science.gov (United States)

    Yang, Jing; Huang, Si-min; Li, Ze-jian; Feng, Lie; Lu, Chun-ting

    2018-01-01

    Purpose: To develop a novel method for closely and effectively integrating simulation scenarios and clinical practices to improve clinical skills training in the concepts of translational medicine. Methods: Forty-two and 38 third-year medical students in the classes of 2010 and 2009 at Jinan University were selected as an observation group and a…

  8. Technical Assessment: Integrated Photonics

    Science.gov (United States)

    2015-10-01

    and resources we routinely demand are predicated on the delivery of high-bandwidth services. At the same time, new computing paradigms such as cloud ...state of the art IPCs onshore. Recommendation 11: Continue to implement policies designed to ensure production integrity of IPC technology. This...operators include both content providers such as Netflix, and Amazon , and neutral providers such as Digital Realty, Equinix, and Rackspace. Cloud operators

  9. Process Risk Assessment using Dynamic Simulation of Scenarios

    DEFF Research Database (Denmark)

    Markert, Frank; Kozin, Igor; Duijm, Nijs Jan

    2016-01-01

    identification, description of accident scenarios and using the conventional approach to develop static event trees for events following a loss of containment. Modelling the impacts and consequences needs models to describe the release, dispersion and effect of the hazardous material, as well as models...

  10. Assessing Threat Detection Scenarios through Hypothesis Generation and Testing

    Science.gov (United States)

    2015-12-01

    Publications. Field, A. (2005). Discovering statistics using SPSS (2nd ed.). Thousand Oaks, CA: Sage Publications. Fisher, S. D., Gettys, C. F...therefore, subsequent F statistics are reported using the Huynh-Feldt correction (Greenhouse-Geisser Epsilon > .775). Experienced and inexperienced...change in hypothesis using experience and initial confidence as predictors. In the Dog Day scenario, the regression was not statistically

  11. Scenarios for the assessment of urban exposures after radioactive contamination

    International Nuclear Information System (INIS)

    Silva, D.N.G.; Guimarães, J.R.D.; Rochedo, E.R.R.

    2015-01-01

    Accidents involving radioactive material are not frequent but may include releases of radionuclides to the air, land or waterways. These releases are usually uncontrollable and may lead to doses in the public in excess of the reference levels established by regulations defined by the national regulatory agencies of each country. Although they had occurred sporadically since the last century, it was observed that, after the emergency phase, the public concern is enhanced when they feel that there is an unpreparedness of authorities responsible for remediation actions, due to the lack of definition of strategies to be adopted in the long term after such events. The aim of this work is to describe reference urban scenarios, considering the characteristics observed in residential and free access areas of urban centers. These scenarios were developed based on the counties surrounding the Brazilian nuclear power plant. Considering the counties within 50 km from the nuclear power plant, nine belong to the state of Rio de Janeiro and seven belong to São Paulo state; the highest population densities were observed in five counties of Rio de Janeiro. Based on the different types of residences and outdoor areas observed in these 16 counties, six reference scenarios for urban areas were developed including areas comprised by four types of residential houses (with low, medium and high shielding building material and houses in a row), apartments in buildings, and park areas with lawn and trees. The characteristics of each of these scenarios were raised through Google Earth images considering 1 km 2 of different locations comprised by each type of area defined. In a next step, the information obtained in each scenario shall be used in computer simulations to characterize the effects and consequences on public exposure of the application of decontamination procedures. (authors)

  12. Scenario analysis in environmental impact assessment: Improving explorations of the future

    International Nuclear Information System (INIS)

    Duinker, Peter N.; Greig, Lorne A.

    2007-01-01

    Scenarios and scenario analysis have become popular approaches in organizational planning and participatory exercises in pursuit of sustainable development. However, they are little used, at least in any formal way, in environmental impact assessment (EIA). This is puzzling because EIA is a process specifically dedicated to exploring options for more-sustainable (i.e., less environmentally damaging) futures. In this paper, we review the state of the art associated with scenarios and scenario analysis, and describe two areas where scenario analysis could be particularly helpful in EIA: (a) in defining future developments for cumulative effects assessment; and (b) in considering the influence of contextual change - e.g. climate change - on impact forecasts for specific projects. We conclude by encouraging EIA practitioners to learn about the promise of scenario-based analysis and implement scenario-based methods so that EIA can become more effective in fostering sustainable development

  13. Professional training in physiotherapy: barriers to the diversification of practical learning scenarios and for teaching-service integration

    Directory of Open Access Journals (Sweden)

    Ana Paula Maihack Gauer

    2018-06-01

    Full Text Available Abstract Introduction: Professional training in health, at present, aims to develop competencies and skills for a performance according the principles of the Unified Health System (SUS, in Portuguese. In this sense, the Ministries of Health and Education have set up devices for training reorientation that prioritize teaching-service integration and diversification of learning scenarios. Objective: To describe barriers to the diversification of practical learning scenarios and for teaching-service integration in a physiotherapy course from the perspective of teachers and students. Methods: This is a qualitative research developed according to the case study method, with the participation of 16 students and 11 teachers-physiotherapists. During the data collection three focus groups were established, two with students and one with professors, besides individual interviews with both the course coordinator and the pedagogical articulator of the National Program for the Reorientation of Professional Health Training of the assessed course. Data were analyzed through thematic content analysis. Results: Among the identified barriers there are students’ low participation in public health services; saturation of public health services for students to carry out practical activities; low number of physiotherapists in Primary Care; indirect relationship of Clinical School with SUS. Conclusion: In order to improve the teaching-service interaction and to diversify the learning scenarios it is necessary to prioritize an integrated planning of actions to overcome identified barriers, including the participation of both the university managers and health services.

  14. State Program Integrity Assessment (SPIA)

    Data.gov (United States)

    U.S. Department of Health & Human Services — The State Program Integrity Assessment (SPIA) is the Centers for Medicare and Medicaid Services (CMS) first national data collection on state Medicaid program...

  15. Integrated Environmental Assessment Modelling

    Energy Technology Data Exchange (ETDEWEB)

    Guardanz, R; Gimeno, B S; Bermejo, V; Elvira, S; Martin, F; Palacios, M; Rodriguez, E; Donaire, I [Ciemat, Madrid (Spain)

    2000-07-01

    This report describes the results of the Spanish participation in the project Coupling CORINAIR data to cost-effect emission reduction strategies based on critical threshold. (EU/LIFE97/ENV/FIN/336). The subproject has focused on three tasks. Develop tools to improve knowledge on the spatial and temporal details of emissions of air pollutants in Spain. Exploit existing experimental information on plant response to air pollutants in temperate ecosystem and Integrate these findings in a modelling framework that can asses with more accuracy the impact of air pollutants to temperate ecosystems. The results obtained during the execution of this project have significantly improved the models of the impact of alternative emission control strategies on ecosystems and crops in the Iberian Peninsula. (Author) 375 refs.

  16. Socio-economic scenario development for the assessment of climate change impacts on agricultural land use: a pairwise comparison approach

    DEFF Research Database (Denmark)

    Abildtrup, Jens; Audsley, E.; Fekete-Farkas, M.

    2006-01-01

    Assessment of the vulnerability of agriculture to climate change is strongly dependent on concurrent changes in socio-economic development pathways. This paper presents an integrated approach to the construction of socio-economic scenarios required for the analysis of climate change impacts...... on European agricultural land use. The scenarios are interpreted from the storylines described in the intergovernmental panel on climate change (IPCC) special report on emission scenarios (SRES), which ensures internal consistency between the evolution of socio-economics and climate change. A stepwise...... downscaling procedure based on expert-judgement and pairwise comparison is presented to obtain quantitative socio-economic parameters, e.g. prices and productivity estimates that are input to the ACCELERATES integrated land use model. In the first step, the global driving forces are identified and quantified...

  17. SIMGERE: software para avaliação de cenários de gestão integrada de resíduos sólidos domiciliares SIMGERE: software to assess scenarios of integrated household solid waste management

    Directory of Open Access Journals (Sweden)

    Luciana Miyoko Massukado

    2006-06-01

    Full Text Available Este artigo apresenta o desenvolvimento de um sistema de apoio à decisão como ferramenta para analisar diferentes cenários de gestão integrada de resíduos sólidos domiciliares. O SIMGERE, nome do software, foi desenvolvido para auxiliar as Administrações Públicas Municipais na gestão dos resíduos sólidos domiciliares por meio da simulação de cenários, mostrando os efeitos que poderão ocorrer a partir de possíveis mudanças nas estratégias da gestão. Para tanto, foi definido e delimitado o campo de trabalho do sistema de apoio à decisão seguindo-se para a construção do modelo conceitual com base no conhecimento adquirido na literatura pertinente, para depois traduzi-lo em telas de ação e fluxogramas de decisão. Terminados estes procedimentos iniciou-se a codificação do modelo em linguagem de programação (Delphi 6.0. Paralelamente foram realizados testes de validação do sistema quanto a usabilidade e coerência, sendo os erros ajustados. Finalmente, foram gerados os arquivos executáveis do sistema para sua instalação e posterior disponibilização.This paper presents a development of decision support system tool to analyze household solid waste management scenarios. SIMGERE, software's name, was developed to aid Municipal Administration in the management of their household solid waste through the simulation of scenarios, showing the effects that can happen if some targets were changed in the management. The development of the method consisted in defining and delimiting the work field of decision support system, followed by the construction of a conceptual model based on the acquired knowledge. The model was then translated in action screens and decision workflows, which were programmed in Delphi 6.0. At the same time tests of system validation were accomplished in two ways - first on program's usability and second on the coherence of results, being the adjusted mistakes. Finally, the executable files of the

  18. The advanced scenario analysis for performance assessment of geological disposal. Pt. 3. Main document

    International Nuclear Information System (INIS)

    Ohkubo, Hiroo

    2004-02-01

    In 'H12 Project to Establish Technical Basis for HLW Disposal in Japan' an approach that is based on an international consensus was adopted to develop scenarios to be considered in performance assessment. Adequacy of the approach was, in general term, appreciated through the peer review. However it was also suggested that there are issues related to improving transparency and traceability of the procedure. Therefore, in the current financial year, in the first place a scenario development methodology was constructed taking into account the requirements identified last year. Furthermore a practical work-frame was developed to support the activities related to the scenario development. This work-frame was applied to an example scenario to check its applicability and identify issues for further research. Secondly, scenario analysis method with regard to perturbation scenario has been studied. First of all, a survey of perturbation scenario discussed in different countries has been carried out and its assessment has been examined. Especially, in Japan, technical information has been classified in order to assess three scenarios, which are seismic activity, faulting and igneous activity. Then, on the basis of assumed occurrence pattern and influence pattern for each perturbation scenario, variant type that should be considered in this analysis has been identified, and the concept of treatment, modeling data and requirements have been clarified. As a result of these researches, a future direction for advanced scenario analysis on performance assessment has been indicated, as well as associated issues to be discussed have been clarified. (author)

  19. Climate change mitigation: comparative assessment of Malaysian and ASEAN scenarios.

    Science.gov (United States)

    Rasiah, Rajah; Ahmed, Adeel; Al-Amin, Abul Quasem; Chenayah, Santha

    2017-01-01

    This paper analyses empirically the optimal climate change mitigation policy of Malaysia with the business as usual scenario of ASEAN to compare their environmental and economic consequences over the period 2010-2110. A downscaling empirical dynamic model is constructed using a dual multidisciplinary framework combining economic, earth science, and ecological variables to analyse the long-run consequences. The model takes account of climatic variables, including carbon cycle, carbon emission, climatic damage, carbon control, carbon concentration, and temperature. The results indicate that without optimal climate policy and action, the cumulative cost of climate damage for Malaysia and ASEAN as a whole over the period 2010-2110 would be MYR40.1 trillion and MYR151.0 trillion, respectively. Under the optimal policy, the cumulative cost of climatic damage for Malaysia would fall to MYR5.3 trillion over the 100 years. Also, the additional economic output of Malaysia will rise from MYR2.1 billion in 2010 to MYR3.6 billion in 2050 and MYR5.5 billion in 2110 under the optimal climate change mitigation scenario. The additional economic output for ASEAN would fall from MYR8.1 billion in 2010 to MYR3.2 billion in 2050 before rising again slightly to MYR4.7 billion in 2110 in the business as usual ASEAN scenario.

  20. An integrated pipeline to create and experience compelling scenarios in virtual reality

    Science.gov (United States)

    Springer, Jan P.; Neumann, Carsten; Reiners, Dirk; Cruz-Neira, Carolina

    2011-03-01

    One of the main barriers to create and use compelling scenarios in virtual reality is the complexity and time-consuming efforts for modeling, element integration, and the software development to properly display and interact with the content in the available systems. Still today, most virtual reality applications are tedious to create and they are hard-wired to the specific display and interaction system available to the developers when creating the application. Furthermore, it is not possible to alter the content or the dynamics of the content once the application has been created. We present our research on designing a software pipeline that enables the creation of compelling scenarios with a fair degree of visual and interaction complexity in a semi-automated way. Specifically, we are targeting drivable urban scenarios, ranging from large cities to sparsely populated rural areas that incorporate both static components (e. g., houses, trees) and dynamic components (e. g., people, vehicles) as well as events, such as explosions or ambient noise. Our pipeline has four basic components. First, an environment designer, where users sketch the overall layout of the scenario, and an automated method constructs the 3D environment from the information in the sketch. Second, a scenario editor used for authoring the complete scenario, incorporate the dynamic elements and events, fine tune the automatically generated environment, define the execution conditions of the scenario, and set up any data gathering that may be necessary during the execution of the scenario. Third, a run-time environment for different virtual-reality systems provides users with the interactive experience as designed with the designer and the editor. And fourth, a bi-directional monitoring system that allows for capturing and modification of information from the virtual environment. One of the interesting capabilities of our pipeline is that scenarios can be built and modified on-the-fly as they are

  1. Modelling regional land change scenarios to assess land abandonment and reforestation dynamics in the Pyrenees (France)

    Science.gov (United States)

    Vacquie, Laure; Houet, Thomas; Sohl, Terry L.; Reker, Ryan R.; Sayler, Kristi L.

    2015-01-01

    Over the last decades and centuries, European mountain landscapes have experienced substantial transformations. Natural and anthropogenic LULC changes (land use and land cover changes), especially agro-pastoral activities, have directly influenced the spatial organization and composition of European mountain landscapes. For the past sixty years, natural reforestation has been occurring due to a decline in both agricultural production activities and rural population. Stakeholders, to better anticipate future changes, need spatially and temporally explicit models to identify areas at risk of land change and possible abandonment. This paper presents an integrated approach combining forecasting scenarios and a LULC changes simulation model to assess where LULC changes may occur in the Pyrenees Mountains, based on historical LULC trends and a range of future socio-economic drivers. The proposed methodology considers local specificities of the Pyrenean valleys, sub-regional climate and topographical properties, and regional economic policies. Results indicate that some regions are projected to face strong abandonment, regardless of the scenario conditions. Overall, high rates of change are associated with administrative regions where land productivity is highly dependent on socio-economic drivers and climatic and environmental conditions limit intensive (agricultural and/or pastoral) production and profitability. The combination of the results for the four scenarios allows assessments of where encroachment (e.g. colonization by shrublands) and reforestation are the most probable. This assessment intends to provide insight into the potential future development of the Pyrenees to help identify areas that are the most sensitive to change and to guide decision makers to help their management decisions.

  2. Scenario driven data modelling: a method for integrating diverse sources of data and data streams

    Science.gov (United States)

    2011-01-01

    Background Biology is rapidly becoming a data intensive, data-driven science. It is essential that data is represented and connected in ways that best represent its full conceptual content and allows both automated integration and data driven decision-making. Recent advancements in distributed multi-relational directed graphs, implemented in the form of the Semantic Web make it possible to deal with complicated heterogeneous data in new and interesting ways. Results This paper presents a new approach, scenario driven data modelling (SDDM), that integrates multi-relational directed graphs with data streams. SDDM can be applied to virtually any data integration challenge with widely divergent types of data and data streams. In this work, we explored integrating genetics data with reports from traditional media. SDDM was applied to the New Delhi metallo-beta-lactamase gene (NDM-1), an emerging global health threat. The SDDM process constructed a scenario, created a RDF multi-relational directed graph that linked diverse types of data to the Semantic Web, implemented RDF conversion tools (RDFizers) to bring content into the Sematic Web, identified data streams and analytical routines to analyse those streams, and identified user requirements and graph traversals to meet end-user requirements. Conclusions We provided an example where SDDM was applied to a complex data integration challenge. The process created a model of the emerging NDM-1 health threat, identified and filled gaps in that model, and constructed reliable software that monitored data streams based on the scenario derived multi-relational directed graph. The SDDM process significantly reduced the software requirements phase by letting the scenario and resulting multi-relational directed graph define what is possible and then set the scope of the user requirements. Approaches like SDDM will be critical to the future of data intensive, data-driven science because they automate the process of converting

  3. Risk assessment by convergence methodology in RDD scenarios

    International Nuclear Information System (INIS)

    Araujo, Olga Maria Oliveira de; Andrade, Edson Ramos de; Rebello, Wilson Freitas; Silva, Gabriel Fidalgo Queiroz da

    2015-01-01

    An RDD event occurs by explosion and radioactive material dispersion where particles containing radioactive material can reach great distances from original point of the explosion and generating a plume of contamination. The use of a RDD is regarded as the most likely scenario involving radiological terrorist material. Accurate information on the population and the estimated dose are essential for analysis during the decision process. This work intends to present a proposal for a convergence of methodologies using the computer simulation codes Hotspot Health Physics 3.0 and the statistical model Radiation Effects Research Foundation (RERF) to calculate the approximate dose depending on the distance of the original point of the explosion of an RDD. From those data, the relative risk of developing tumors is estimated, as well as the probability of causation. At a later stage, the proposed combination of actions intended to help the decision-making and employment response personnel in emergency protection measures, such as sheltering and evacuation through the RESRAD-RDD software. The convergence of the proposed methodology can accelerate the process of acquiring information during the first hours of a radiological scenario and provide proper management of medical response and organization of the overall response. (author)

  4. Risk assessment by convergence methodology in RDD scenarios

    Energy Technology Data Exchange (ETDEWEB)

    Araujo, Olga Maria Oliveira de; Andrade, Edson Ramos de; Rebello, Wilson Freitas; Silva, Gabriel Fidalgo Queiroz da, E-mail: olgafisica2013@hotmail.com, E-mail: fisica.dna@gmail.com, E-mail: rebello@ime.eb.br, E-mail: profgabriel.fisica@gmail.com [Instituto Militar de Engenharia (IME), Rio de Janeiro, RJ (Brazil). Secao de Engenharia Nuclear

    2015-07-01

    An RDD event occurs by explosion and radioactive material dispersion where particles containing radioactive material can reach great distances from original point of the explosion and generating a plume of contamination. The use of a RDD is regarded as the most likely scenario involving radiological terrorist material. Accurate information on the population and the estimated dose are essential for analysis during the decision process. This work intends to present a proposal for a convergence of methodologies using the computer simulation codes Hotspot Health Physics 3.0 and the statistical model Radiation Effects Research Foundation (RERF) to calculate the approximate dose depending on the distance of the original point of the explosion of an RDD. From those data, the relative risk of developing tumors is estimated, as well as the probability of causation. At a later stage, the proposed combination of actions intended to help the decision-making and employment response personnel in emergency protection measures, such as sheltering and evacuation through the RESRAD-RDD software. The convergence of the proposed methodology can accelerate the process of acquiring information during the first hours of a radiological scenario and provide proper management of medical response and organization of the overall response. (author)

  5. Feasibility of integrating a multi-camera optical tracking system in intra-operative electron radiation therapy scenarios

    International Nuclear Information System (INIS)

    García-Vázquez, V; Marinetto, E; Santos-Miranda, J A; Calvo, F A; Desco, M; Pascau, J

    2013-01-01

    Intra-operative electron radiation therapy (IOERT) combines surgery and ionizing radiation applied directly to an exposed unresected tumour mass or to a post-resection tumour bed. The radiation is collimated and conducted by a specific applicator docked to the linear accelerator. The dose distribution in tissues to be irradiated and in organs at risk can be planned through a pre-operative computed tomography (CT) study. However, surgical retraction of structures and resection of a tumour affecting normal tissues significantly modify the patient's geometry. Therefore, the treatment parameters (applicator dimension, pose (position and orientation), bevel angle, and beam energy) may require the original IOERT treatment plan to be modified depending on the actual surgical scenario. We propose the use of a multi-camera optical tracking system to reliably record the actual pose of the IOERT applicator in relation to the patient's anatomy in an environment prone to occlusion problems. This information can be integrated in the radio-surgical treatment planning system in order to generate a real-time accurate description of the IOERT scenario. We assessed the accuracy of the applicator pose by performing a phantom-based study that resembled three real clinical IOERT scenarios. The error obtained (2 mm) was below the acceptance threshold for external radiotherapy practice, thus encouraging future implementation of this approach in real clinical IOERT scenarios. (paper)

  6. The Preventable Risk Integrated ModEl and Its Use to Estimate the Health Impact of Public Health Policy Scenarios

    Directory of Open Access Journals (Sweden)

    Peter Scarborough

    2014-01-01

    Full Text Available Noncommunicable disease (NCD scenario models are an essential part of the public health toolkit, allowing for an estimate of the health impact of population-level interventions that are not amenable to assessment by standard epidemiological study designs (e.g., health-related food taxes and physical infrastructure projects and extrapolating results from small samples to the whole population. The PRIME (Preventable Risk Integrated ModEl is an openly available NCD scenario model that estimates the effect of population-level changes in diet, physical activity, and alcohol and tobacco consumption on NCD mortality. The structure and methods employed in the PRIME are described here in detail, including the development of open source code that will support a PRIME web application to be launched in 2015. This paper reviews scenario results from eleven papers that have used the PRIME, including estimates of the impact of achieving government recommendations for healthy diets, health-related food taxes and subsidies, and low-carbon diets. Future challenges for NCD scenario modelling, including the need for more comparisons between models and the improvement of future prediction of NCD rates, are also discussed.

  7. Evaluating hydrological response to forecasted land-use change—scenario testing with the automated geospatial watershed assessment (AGWA) tool

    Science.gov (United States)

    Kepner, William G.; Semmens, Darius J.; Hernandez, Mariano; Goodrich, David C.

    2009-01-01

    Envisioning and evaluating future scenarios has emerged as a critical component of both science and social decision-making. The ability to assess, report, map, and forecast the life support functions of ecosystems is absolutely critical to our capacity to make informed decisions to maintain the sustainable nature of our ecosystem services now and into the future. During the past two decades, important advances in the integration of remote imagery, computer processing, and spatial-analysis technologies have been used to develop landscape information that can be integrated with hydrologic models to determine long-term change and make predictive inferences about the future. Two diverse case studies in northwest Oregon (Willamette River basin) and southeastern Arizona (San Pedro River) were examined in regard to future land use scenarios relative to their impact on surface water conditions (e.g., sediment yield and surface runoff) using hydrologic models associated with the Automated Geospatial Watershed Assessment (AGWA) tool. The base reference grid for land cover was modified in both study locations to reflect stakeholder preferences 20 to 60 yrs into the future, and the consequences of landscape change were evaluated relative to the selected future scenarios. The two studies provide examples of integrating hydrologic modeling with a scenario analysis framework to evaluate plausible future forecasts and to understand the potential impact of landscape change on ecosystem services.

  8. Feature, Event, and Process Screening and Scenario Development for the Yucca Mountain Total System Performance Assessment

    International Nuclear Information System (INIS)

    Barnard, R.; Barr, G.; Burch, P.; Freeze, G.; Rechard, R.; Schenker, A.; Swift, P.

    1999-01-01

    Scenario development has two primary purposes in the design and documentation of post-closure performance assessments in a regulatory setting. First, scenario development ensures a sufficiently comprehensive consideration of the possible future states of the system. Second, scenario development identifies the important scenarios that must be considered in quantitative analyses of the total system performance assessment (TSPA). Section 2.0 of this report describes the scenario development process. Steps in the process are described in Section 2.1, and terms introduced in this section are defined in Section 2.2. The electronic database used to document the process is described in Section 3, and Section 4 provides a summary of the current status of the YMP scenario development work. Section 5 contains acknowledgments, and Section 6 contains a list of the references cited

  9. Integrating surrogate models into subsurface simulation framework allows computation of complex reactive transport scenarios

    Science.gov (United States)

    De Lucia, Marco; Kempka, Thomas; Jatnieks, Janis; Kühn, Michael

    2017-04-01

    Reactive transport simulations - where geochemical reactions are coupled with hydrodynamic transport of reactants - are extremely time consuming and suffer from significant numerical issues. Given the high uncertainties inherently associated with the geochemical models, which also constitute the major computational bottleneck, such requirements may seem inappropriate and probably constitute the main limitation for their wide application. A promising way to ease and speed-up such coupled simulations is achievable employing statistical surrogates instead of "full-physics" geochemical models [1]. Data-driven surrogates are reduced models obtained on a set of pre-calculated "full physics" simulations, capturing their principal features while being extremely fast to compute. Model reduction of course comes at price of a precision loss; however, this appears justified in presence of large uncertainties regarding the parametrization of geochemical processes. This contribution illustrates the integration of surrogates into the flexible simulation framework currently being developed by the authors' research group [2]. The high level language of choice for obtaining and dealing with surrogate models is R, which profits from state-of-the-art methods for statistical analysis of large simulations ensembles. A stand-alone advective mass transport module was furthermore developed in order to add such capability to any multiphase finite volume hydrodynamic simulator within the simulation framework. We present 2D and 3D case studies benchmarking the performance of surrogates and "full physics" chemistry in scenarios pertaining the assessment of geological subsurface utilization. [1] Jatnieks, J., De Lucia, M., Dransch, D., Sips, M.: "Data-driven surrogate model approach for improving the performance of reactive transport simulations.", Energy Procedia 97, 2016, p. 447-453. [2] Kempka, T., Nakaten, B., De Lucia, M., Nakaten, N., Otto, C., Pohl, M., Chabab [Tillner], E., Kühn, M

  10. Integration scenarios of Demand Response into electricity markets: Load shifting, financial savings and policy implications

    International Nuclear Information System (INIS)

    Feuerriegel, Stefan; Neumann, Dirk

    2016-01-01

    Demand Response allows for the management of demand side resources in real-time; i.e. shifting electricity demand according to fluctuating supply. When integrated into electricity markets, Demand Response can be used for load shifting and as a replacement for both control reserve and balancing energy. These three usage scenarios are compared based on historic German data from 2011 to determine that load shifting provides the highest benefit: its annual financial savings accumulate to €3.110 M for both households and the service sector. This equals to relative savings of 2.83% compared to a scenario without load shifting. To improve Demand Response integration, the proposed model suggests policy implications: reducing bid sizes, delivery periods and the time-lag between market transactions and delivery dates in electricity markets. - Highlights: •Comparison of 3 scenarios to integrate Demand Response into electricity markets. •These are: optimize procurement, offer as control reserve, avoid balancing energy. •Ex post simulation to quantify financial impact and policy implications. •Highest savings from load shifting with a cost reduction of 3%. •Model suggests reducing bid sizes, delivery periods and time lags as policy issues.

  11. Integrated assessment of climate change

    International Nuclear Information System (INIS)

    Morgan, M.G.

    1994-01-01

    Many researchers are working on all the separate parts of the climate problem. The objective of integrated assessment is to put the results from this work together in order to look carefully at the big picture so as to: (1) keep a proper sense of perspective about the problem, since climate change will occur in the presence of many other natural and human changes; (2) develop the understanding necessary to support informed decision making by many different key public and private actors around the world; and (3) assure that the type and mix of climate-related research that is undertaken will be as useful as possible to decisions makers in both the near and long term. This paper outlines a set of design guidelines for formulating integrated assessment programs and projects and then outlines some of the current problems and opportunities. Selected points are illustrated by drawing on results from the integrated assessment research now in progress at Carnegie Mellon University

  12. Combining integrated models and participatory methods to quantify water and agricultural trade-offs linked to different rural development scenarios

    Science.gov (United States)

    Rivas, David; Willaarts, Barbara; García, Ángel de Miguel; Tarquis, Ana Maria

    2017-04-01

    This study explores the water and agricultural tradeoffs linked to three different rural development scenarios in the Cega-Eresma-Adaja basin (CEA) in Central Spain. Agriculture is a key socioeconomic activity in CEA, and nearly 44% of the basin is devoted to croplands and pastures. Irrigated agriculture accounts for 12% of the cropland area and is currently using over 84% of available water resources. To define the three scenarios for CEA, we conducted a workshop with local stakeholders to infer how contrasting evolutions of EU agricultural, water and environmental policies could affect the local land use and agricultural management using participatory mapping techniques. The three scenarios reflect 1) a business as usual (BAU) rural development; 2) a land sharing strategy (LSH); and 3) a land sparing (LSP) situation. The integrated Soil Water Assessment Tool (SWAT) was used to model the changes in water use (hm^3/year) and agricultural productivity (ton/year) under each scenario. To account for changes in agricultural land use and management, the model integrates a large set of agricultural patterns obtained from combining high resolution remote sensing images (20m x 20m) for the years 2011-2015, agricultural productivity from survey by municipality and land use information obtained from the national map SIOSE2011 (1:50.000). Model calibration and sensitivity analysis were performed using SWAT-CUP/SUFI2 The period of the years 2005 to 2008 were used for parameter calibration and validation period extending between 2009 and 2014. The predicted daily streamflow presents a correlation coefficient of 0.76 and a NS coefficient of 0.81. The preliminary results reveal that under a BAU and a LSP scenario agricultural production and water demand will increase significantly (>25%) despite the improvements in water use efficiency and agricultural productivity. Under these scenarios, allocated water is likely to exceed the natural renewable water resources compromising the

  13. Identification and Selection of Alternative Scenarios in LCA Studies of Integrated Waste Management Systems: A Review of Main Issues and Perspectives

    Directory of Open Access Journals (Sweden)

    Andrea Raggi

    2012-09-01

    Full Text Available Life Cycle Assessment (LCA is a decision support tool that can be used to assess the environmental performance of an integrated waste management system or to identify the system with the best performance through a comparative analysis of different scenarios. The results of the analysis depend primarily on how the scenarios to be compared are defined, that is on which waste fractions are assumed to be sent to certain treatments/destinations and in what amounts. This paper reviews LCAs of integrated waste management systems with the aim of exploring how the scenarios to be compared are defined in the preliminary phase of an LCA. This critical review highlighted that various criteria, more or less subjective, are generally used for the definition of scenarios. Furthermore, the number of scenarios identified and compared is generally limited; this may entail that only the best option among a limited set of possibilities can be selected, instead of identifying the best of all possible combinations. As a result, the advisability of identifying an integrated life cycle-based methodological approach that allows finding the most environmentally sound scenario among all of those that are theoretically possible is stressed.

  14. Challenges of electricity production scenarios modelling for life cycle assessment of environmental impacts

    Energy Technology Data Exchange (ETDEWEB)

    Blanc, Isabelle; Beloin-Saint-Pierre, Didier [MINES ParisTech, Sophia Antipolis (France). Observation, Impacts, Energy Center

    2013-07-01

    This communication presents a first attempt at making a life cycle assessment of prospective electricity production scenarios which were designed in the EnerGEO project. We start by a basic review of system (in this case, scenario) modelling expectations in today's LCA study. We then review some of the challenges of implementation due to the lack of detailed description of present and future electricity production systems. The importance of a detailed description is then shown with an evaluation of uncertainty of life cycle impact assessment results for three scenarios of German electricity production in 2030. The significant uncertainties we found, prevent us from detecting a relevant trend or making any comparison between the three chosen scenarios. We finally come to the conclusion that the LCA methodology will become relevant for the environmental assessment of electricity production scenarios when many more detailed information are accounted to describe future technologies, structures and sources of energy. (orig.)

  15. Challenges of electricity production scenarios modelling for life cycle assessment of environmental impacts

    International Nuclear Information System (INIS)

    Blanc, Isabelle; Beloin-Saint-Pierre, Didier

    2013-01-01

    This communication presents a first attempt at making a life cycle assessment of prospective electricity production scenarios which were designed in the EnerGEO project. We start by a basic review of system (in this case, scenario) modelling expectations in today's LCA study. We then review some of the challenges of implementation due to the lack of detailed description of present and future electricity production systems. The importance of a detailed description is then shown with an evaluation of uncertainty of life cycle impact assessment results for three scenarios of German electricity production in 2030. The significant uncertainties we found, prevent us from detecting a relevant trend or making any comparison between the three chosen scenarios. We finally come to the conclusion that the LCA methodology will become relevant for the environmental assessment of electricity production scenarios when many more detailed information are accounted to describe future technologies, structures and sources of energy. (orig.)

  16. Preparing suitable climate scenario data to assess impacts on local food safety

    NARCIS (Netherlands)

    Liu, C.; Hofstra, N.; Leemans, R.

    2015-01-01

    Quantification of climate change impacts on food safety requires food safety assessment with different past and future climate scenario data to compare current and future conditions. This study presents a tool to prepare climate and climate change data for local food safety scenario analysis and

  17. Scenarios for the Hanford Immobilized Low-Activity Waste (ILAW) performance assessment

    International Nuclear Information System (INIS)

    MANN, F.M.

    1999-01-01

    Scenarios describing representative exposure cases associated with the disposal of low activity waste from the Hanford Waste Tanks have been defined. These scenarios are based on guidance from the Department of Energy, the U.S. Nuclear Regulatory Commission, and previous Hanford waste disposal performance assessments

  18. Economic and environmental assessment of cellulosic ethanol production scenarios annexed to a typical sugar mill.

    Science.gov (United States)

    Ali Mandegari, Mohsen; Farzad, Somayeh; Görgens, Johann F

    2017-01-01

    In this work different biorefinery scenarios were investigated, concerning the co-production of bioethanol and electricity from available lignocellulose at a typical sugar mill, as possible extensions to the current combustion of bagasse for steam and electricity production and burning trash on-filed. In scenario 1, the whole bagasse and brown leaves is utilized in a biorefinery and coal is burnt in the existing inefficient sugar mill boiler. Scenario 2 & 3 are assumed with a new centralized CHP unit without/with coal co-combustion, respectively. Also, through scenarios 4 & 5, the effect of water insoluble loading were studied. All scenarios provided energy for the sugarmill and the ethanol plant, with the export of surplus electricity. Economic analysis determined that scenario 1 was the most viable scenario due to less capital cost and economies-of scale. Based on Life Cycle Assessment (LCA) results, scenario 2 outperformed the other scenarios, while three scenarios showed lower contribution to environmental burdens than the current situation. Copyright © 2016 Elsevier Ltd. All rights reserved.

  19. Finding the Optimum Scenario in Risk-benefit Assessment: An Example on Vitamin D

    DEFF Research Database (Denmark)

    Berjia, Firew Lemma; Hoekstra, J.; Verhagen, H.

    2014-01-01

    when changing from the reference to the optimum scenario. Conclusion: The method allowed us to find the optimum serum level in the vitamin D example. Additional case studies are needed to further validate the applicability of the approach to other nutrients or foods, especially with regards...... a method for finding the optimum scenario that provides maximum net health gains. Methods: A multiple scenario simulation. The method is presented using vitamin D intake in Denmark as an example. In addition to the reference scenario, several alternative scenarios are simulated to detect the scenario...... that provides maximum net health gains. As a common health metric, Disability Adjusted Life Years (DALY) has been used to project the net health effect by using the QALIBRA (Quality of Life for Benefit Risk Assessment) software. Results: The method used in the vitamin D example shows that it is feasible to find...

  20. Instruments to assess integrated care

    DEFF Research Database (Denmark)

    Lyngsø, Anne Marie; Godtfredsen, Nina Skavlan; Høst, Dorte

    2014-01-01

    INTRODUCTION: Although several measurement instruments have been developed to measure the level of integrated health care delivery, no standardised, validated instrument exists covering all aspects of integrated care. The purpose of this review is to identify the instruments concerning how to mea...... was prevalent. It is uncertain whether development of a single 'all-inclusive' model for assessing integrated care is desirable. We emphasise the continuing need for validated instruments embedded in theoretical contexts.......INTRODUCTION: Although several measurement instruments have been developed to measure the level of integrated health care delivery, no standardised, validated instrument exists covering all aspects of integrated care. The purpose of this review is to identify the instruments concerning how...... to measure the level of integration across health-care sectors and to assess and evaluate the organisational elements within the instruments identified. METHODS: An extensive, systematic literature review in PubMed, CINAHL, PsycINFO, Cochrane Library, Web of Science for the years 1980-2011. Selected...

  1. Reference Scenario Forecasting: A New Approach to Transport Project Assessment

    DEFF Research Database (Denmark)

    Salling, Kim Bang; Leleur, Steen; Skougaard, Britt Zoëga

    2010-01-01

    This paper presents a new approach to transport project assessment in terms of feasibility risk assessment and reference class forecasting. Normally, transport project assessment is based upon a cost-benefit approach where evaluation criteria such as net present values are obtained. Recent research...... construction cost estimates. Hereafter, a quantitative risk analysis is provided making use of Monte Carlo simulation. This stochastic approach facilitates random input parameters based upon reference class forecasting, hence, a parameter data fit has been performed in order to obtain validated probability...... forecasting (RSF) frame. The RSF is anchored in the cost-benefit analysis (CBA), thus, it provides decision-makers with a quantitative mean of assessing the transport infrastructure project. First, the RSF method introduces uncertainties within the CBA by applying Optimism Bias uplifts on the preliminary...

  2. The definition and treatment of scenarios in a probabilistic systems assessment

    Energy Technology Data Exchange (ETDEWEB)

    Andres, T.H.; Goodwin, B.W

    1998-03-01

    Concepts for the disposal of nuclear waste generally involve the use of multiple barriers, both man-made and natural, to isolate the waste from man's environment for very long periods of time. To assess the safety of these concepts, postclosure safety assessments are conducted to study the types, ranges and probabilities of potential impacts caused by wastes penetrating these barriers. Within the Canadian context, postclosure safety assessments must estimate radiological risk for comparison with regulatory criteria. The definition of radiological risk introduces a requirement to identify and then evaluate scenarios that describe quantitatively the possible behaviour of a disposal system and its surroundings for at least 10{sup 4} years. This report examines the connection between the identification and evaluation of scenarios. It shows how a large collection of factors can be combined to form simple scenarios, and how a large number of simple scenarios can be grouped into a manageably small number of compound scenarios. The compound scenarios, notably the 'central' scenario, can be evaluated using a probabilistic systems assessment code such as SYVAC3 (SYstems Variability Analysis Code, generation 3) to estimate the radiological risk and other environmental impacts. Examples are taken from a long-term performance assessment study to demonstrate a pragmatic application of the procedure. (author)

  3. The definition and treatment of scenarios in a probabilistic systems assessment

    International Nuclear Information System (INIS)

    Andres, T.H.; Goodwin, B.W.

    1998-03-01

    Concepts for the disposal of nuclear waste generally involve the use of multiple barriers, both man-made and natural, to isolate the waste from man's environment for very long periods of time. To assess the safety of these concepts, postclosure safety assessments are conducted to study the types, ranges and probabilities of potential impacts caused by wastes penetrating these barriers. Within the Canadian context, postclosure safety assessments must estimate radiological risk for comparison with regulatory criteria. The definition of radiological risk introduces a requirement to identify and then evaluate scenarios that describe quantitatively the possible behaviour of a disposal system and its surroundings for at least 10 4 years. This report examines the connection between the identification and evaluation of scenarios. It shows how a large collection of factors can be combined to form simple scenarios, and how a large number of simple scenarios can be grouped into a manageably small number of compound scenarios. The compound scenarios, notably the 'central' scenario, can be evaluated using a probabilistic systems assessment code such as SYVAC3 (SYstems Variability Analysis Code, generation 3) to estimate the radiological risk and other environmental impacts. Examples are taken from a long-term performance assessment study to demonstrate a pragmatic application of the procedure. (author)

  4. Life cycle assessment of cell phones in Brazil based on two reverse logistics scenarios

    Directory of Open Access Journals (Sweden)

    Daniela da Gama e Silva Volpe Moreira de Moraes

    2014-12-01

    Full Text Available This article is a result of a cell phone collection obtained at the Center for Information Technology Renato Archer (CTI under the AMBIENTRONIC Program, an initiative that supports the Brazilian electronic sector in the development of technologies for sustainability. The objective of this article is to assess two reverse logistic scenarios of cell phones using the technique of life-cycle assessment (LCA. The first scenario reflects the current scenario in Brazil, where batteries are recycled in Brazil and the other parts of the phones are outsourced to Europe. The second scenario is a proposal of full treatment in Brazil. The results indicate that the second scenario has a lower potential impact with important reduction of acidification, photochemical oxidation, eutrophication and the use of non-renewable energy. Furthermore, fully implementing reverse logistics in Brazil will enable socioeconomic benefits from the sale of materials and the generation of employment and income.

  5. Using Performance in Multiple Simulated Scenarios to Assess Bronchoscopy Skills

    DEFF Research Database (Denmark)

    Konge, Lars; Arendrup, Henrik; Buchwald, Christian von

    2011-01-01

    using a standardized scoring form. Methods: The test was administered on a virtual reality bronchoscopy simulator to a total of 42 test subjects (14 senior consultants, 14 trainees and 14 medical students). The inter-rater reliability of the test procedure was explored according to examination of test......Background: International guidelines suggest that trainees should perform at least 100 flexible bronchoscopies in a supervised setting, but this number is not evidence based. An objective assessment method could provide educational feedback to trainees and help supervisors decide when basic...... competency is established. No former assessment instrument has been able to distinguish between trainees and experts. Objectives: The aim of this study was to explore the validity and reliability of a new assessment procedure relating to testing operators across multiple tasks with increasing difficulty...

  6. Assessing climate change impacts, benefits of mitigation, and uncertainties on major global forest regions under multiple socioeconomic and emissions scenarios

    Science.gov (United States)

    Kim, John B.; Monier, Erwan; Sohngen, Brent; Pitts, G. Stephen; Drapek, Ray; McFarland, James; Ohrel, Sara; Cole, Jefferson

    2017-04-01

    We analyze a set of simulations to assess the impact of climate change on global forests where MC2 dynamic global vegetation model (DGVM) was run with climate simulations from the MIT Integrated Global System Model-Community Atmosphere Model (IGSM-CAM) modeling framework. The core study relies on an ensemble of climate simulations under two emissions scenarios: a business-as-usual reference scenario (REF) analogous to the IPCC RCP8.5 scenario, and a greenhouse gas mitigation scenario, called POL3.7, which is in between the IPCC RCP2.6 and RCP4.5 scenarios, and is consistent with a 2 °C global mean warming from pre-industrial by 2100. Evaluating the outcomes of both climate change scenarios in the MC2 model shows that the carbon stocks of most forests around the world increased, with the greatest gains in tropical forest regions. Temperate forest regions are projected to see strong increases in productivity offset by carbon loss to fire. The greatest cost of mitigation in terms of effects on forest carbon stocks are projected to be borne by regions in the southern hemisphere. We compare three sources of uncertainty in climate change impacts on the world’s forests: emissions scenarios, the global system climate response (i.e. climate sensitivity), and natural variability. The role of natural variability on changes in forest carbon and net primary productivity (NPP) is small, but it is substantial for impacts of wildfire. Forest productivity under the REF scenario benefits substantially from the CO2 fertilization effect and that higher warming alone does not necessarily increase global forest carbon levels. Our analysis underlines why using an ensemble of climate simulations is necessary to derive robust estimates of the benefits of greenhouse gas mitigation. It also demonstrates that constraining estimates of climate sensitivity and advancing our understanding of CO2 fertilization effects may considerably reduce the range of projections.

  7. Development of Digital Mock-Up for the Assessment of Dismantling Scenarios

    International Nuclear Information System (INIS)

    Kim, Sung-Kyun; Park, Hee-Sung; Lee, Kune-Woo; Jung, Chong-Hun

    2008-01-01

    As the number of superannuated research reactors and nuclear power plants increase, dismantling nuclear power facilities has become a big issue. However, decommissioning a nuclear facility is still a costly and possibly hazardous task. So prior to an actual decommission, what should be done foremost is to establish a proper procedure. Due to the fact that a significant difference in cost, exposure to a radiation, and safety might occur, a proper procedure is imperative for the entire engineering process. The purpose of this paper is to develop a system for evaluating the decommissioning scenarios logically and systematically. So a digital mockup system with functions such as a dismantling schedule, decommissioning costs, wastes, worker's exposure dose, and a radiation distribution was developed. Also on the basis of the quantitative information calculated from a DMU system and the data evaluated by decommissioning experts about qualitatively evaluating the items, the best decommissioning scenarios were established by using the analytic hierarchy process (AHP) method. Finally, the DMU was implemented in the thermal column of KRR-1 and adequate scenarios were provided after comparing and analyzing the two scenarios. In this paper, we developed the virtual environment of KRR-1 by using computer graphic technology and simulating the dismantling processes. The data-computing modules were also developed for quantitatively comparing the decommissioning scenarios. The decommissioning DMU system was integrated with both the VE system and the data-computing modules. In addition, we presented a decision-making method for selecting the best decommissioning scenario through the AHP. So the scenarios can be evaluated logically and quantitatively through the decommissioning DMU. As an implementation of the AHP, the plasma cutting scenario and the nibbler cutting scenario of the thermal column were prioritized. The fact that the plasma cutting scenario ranked the better than the

  8. Scenario drafting to anticipate future developments in technology assessment

    NARCIS (Netherlands)

    Retel, Valesca; Retel, V.P.; Joore, M.A.; Rutgers, E.J.; van Harten, Willem H.

    2012-01-01

    Background Health Technology Assessment (HTA) information, and in particular cost-effectiveness data is needed to guide decisions, preferably already in early stages of technological development. However, at that moment there is usually a high degree of uncertainty, because evidence is limited and

  9. SCHRAADLO: Assessment of SCHRAADLO-T performance for S scenario

    International Nuclear Information System (INIS)

    Horyna, J.

    1996-01-01

    The model SCHRAADLO has been developed to assess the environmental impact of nuclear facilities. It is a dynamic compartmental model. The model is driven by daily air concentration and daily precipitation rate. The output are time dependent concentrations in soil, different types of meat and plants, milk and whole body. There are not included aquatic and seminatural food chains. Calculations of contamination of fungi have been performed separately. 8 figs, 2 tabs

  10. Scenario based approach for multiple source Tsunami Hazard assessment for Sines, Portugal

    Science.gov (United States)

    Wronna, M.; Omira, R.; Baptista, M. A.

    2015-08-01

    In this paper, we present a scenario-based approach for tsunami hazard assessment for the city and harbour of Sines - Portugal, one of the test-sites of project ASTARTE. Sines holds one of the most important deep-water ports which contains oil-bearing, petrochemical, liquid bulk, coal and container terminals. The port and its industrial infrastructures are facing the ocean southwest towards the main seismogenic sources. This work considers two different seismic zones: the Southwest Iberian Margin and the Gloria Fault. Within these two regions, we selected a total of six scenarios to assess the tsunami impact at the test site. The tsunami simulations are computed using NSWING a Non-linear Shallow Water Model With Nested Grids. In this study, the static effect of tides is analysed for three different tidal stages MLLW (mean lower low water), MSL (mean sea level) and MHHW (mean higher high water). For each scenario, inundation is described by maximum values of wave height, flow depth, drawback, runup and inundation distance. Synthetic waveforms are computed at virtual tide gauges at specific locations outside and inside the harbour. The final results describe the impact at Sines test site considering the single scenarios at mean sea level, the aggregate scenario and the influence of the tide on the aggregate scenario. The results confirm the composite of Horseshoe and Marques Pombal fault as the worst case scenario. It governs the aggregate scenario with about 60 % and inundates an area of 3.5 km2.

  11. Exposure scenario libraries as a tool for exposure assessment

    International Nuclear Information System (INIS)

    Jiménez, Araceli Sánchez; Rashid, Shahzad; Van Tongeren, Martie; Brouwer, Derk; Fransman, Wouter; Fito, Carlos; Boulougouris, George

    2015-01-01

    The development of nanotechnology has reached a point where it is being widely applied, and numerous nanomaterials and nano-enabled products are handled across a broad range of industrial sectors. Exposure extends beyond occupational settings as products containing nanomaterials are used by different consumer groups.Despite the knowledge on their toxic effects is growing there is still not OEL for most NMS and therefore the precautionary approach is still used where levels are kept as low as possible Therefore there is a need to assess workers and consumers exposure. (paper)

  12. From Seismic Scenarios to Earthquake Risk Assessment: A Case Study for Iquique, Chile.

    Science.gov (United States)

    Aguirre, P.; Fortuno, C.; Martin, J. C. D. L. L.; Vasquez, J.

    2015-12-01

    Iquique is a strategic city and economic center in northern Chile, and is located in a large seismic gap where a megathrust earthquake and tsunami is expected. Although it was hit by a Mw 8.2 earthquake on April 1st 2014, which caused moderate damage, geophysical evidence still suggests that there is potential for a larger event, so a thorough risk assessment is key to understand the physical, social, and economic effects of such potential event, and devise appropriate mitigation plans. Hence, Iquique has been selected as a prime study case for the implementation of a risk assessment platform in Chile. Our study integrates research on three main elements of risk calculations: hazard evaluation, exposure model, and physical vulnerabilities. To characterize the hazard field, a set of synthetic seismic scenarios have been developed based on plate interlocking and the residual slip potential that results from subtracting the slip occurred during the April 1st 2014 rupture fault mechanism, obtained using InSAR+GPS inversion. Additional scenarios were developed based of the fault rupture model of the Maule 2010 Mw 8.8 earthquake and on the local plate locking models in northern Chile. These rupture models define a collection of possible realizations of earthquake geometries parameterized in terms of critical variables like slip magnitude, rise time, mean propagation velocity, directivity, and other, which are propagated to obtain a hazard map for Iquique (e.g. PGA, PGV, PDG). Furthermore, a large body of public and local data was used to construct a detailed exposure model for Iquique, including aggregated building count, demographics, essential facilities, and lifelines. This model together with the PGA maps for the April 1st 2014 earthquake are used to calibrate HAZUS outputs against observed damage, and adjust the fragility curves of physical systems according to more detailed analyses of typical Chilean building types and their structural properties, plus historical

  13. Future scenarios: a technical document supporting the Forest Service 2010 RPA Assessment

    Science.gov (United States)

    . USDA Forest Service.

    2012-01-01

    The Forest and Rangeland Renewable Resources Planning Act of 1974 (RPA) mandates a periodic assessment of the conditions and trends of the Nation's renewable resources on forests and rangelands. The RPA Assessment includes projections of resource conditions and trends 50 years into the future. The 2010 RPA Assessment used a set of future scenarios to provide a...

  14. Development of safety assessment method for human intrusion scenario in Japan. Part 1. Drilling scenario database for safety assessment of geological disposal (Contract research)

    International Nuclear Information System (INIS)

    Nagasawa, Hirokazu; Takeda, Seiji; Kimura, Hideo; Sasaki, Toshihisa

    2010-11-01

    In deep geological disposal or intermediate depth disposal, human intrusion, i.e. accidental excavation or drilling into the disposal site, may make a direct or an indirect effect on the disposal system. Safety assessment method for the human intrusion scenario, that is, the evaluation code of radiological effect from the human intrusion and the data to examine the reduction of the probability of the human intrusion occurring, is essential for the future safety regulation. Assuming that drilling action into the disposal site leads to the human proximity to the radioactive waste or the damage to the barrier system (drilling scenario), we have collected both the data on borehole drilling implemented in Japan and information on actual situation of drilling activities. Based on the data and information, we provide concrete exposure scenarios associated with borehole drilling in the vicinity of the repository and model for estimating the frequency on borehole reaching the depth of repository. The frequency is characterized with the relation to objective of excavation, geographical features, and region in Japan etc. We have developed an assembly of the information mentioned above as database, including the model parameters used in the code to assess radiation dose for drilling scenario. (author)

  15. TA-54 (Area G) Risk Assessment from Extreme Wildfire Scenarios

    Energy Technology Data Exchange (ETDEWEB)

    Linn, Rodman Ray [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Koo, Eunmo [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Honig, Kristen Ann [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); White, Judith [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Funk, David John [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-08-10

    Los Alamos National Laboratory (LANL) and surrounding areas have been exposed to at least four significant wildfires since 1977 and there have been numerous others within 50 miles of LANL. Based on this history, wildfires are considered a risk to LANL facilities and their contents. While many LANL facilities are at risk to wildfire to some degree, they are found in a wide variety of conditions, thus they have varying sensitivities to wildfires. Additionally, LANL facilities have various functions and different assets, so they have a wide range of values or consequences if compromised. Therefore, determining the risks and precautions that are warranted to mitigate these risks must be done on a case-by-case basis. In an effort to assess possible wildfire risks to sensitive materials stored in a Perma-Con® in dome TA-54-0375, a conventional fire risk analysis was performed. This conventional risk analysis is documented in Engineering Evaluation Form AP-FIRE-001-FM1, which is dated 9/28/2015 and was titled ‘Wildland Fire Exposure Evaluation for Building TA-54-0375’ (Hall 2015). This analysis acknowledged that there was significant chance of wildfire in the vicinity of TA-54-0375, but the amount of combustible material surrounding the building was deemed low. The wildland fuels that were closest to the building were largely fine fuels and were not expected to have significant duration of heat release. The prevailing winds at this location are from the south and southwest and the nearest significant upwind fuels (tree crowns or unmown grasses) are at least 300 feet away. Based on these factors the conventional wildland fire risk to TA-54-0375 was deemed minimal, “Acceptable As Is, No Action Required.” This risk evaluation was based on a combined assessment of low probability of wildfires arriving at the site from other directions (where higher fuel loadings might be present) as well as the effective setback of fuels in the direction that fire is

  16. Capacity Model and Constraints Analysis for Integrated Remote Wireless Sensor and Satellite Network in Emergency Scenarios

    Science.gov (United States)

    Zhang, Wei; Zhang, Gengxin; Dong, Feihong; Xie, Zhidong; Bian, Dongming

    2015-01-01

    This article investigates the capacity problem of an integrated remote wireless sensor and satellite network (IWSSN) in emergency scenarios. We formulate a general model to evaluate the remote sensor and satellite network capacity. Compared to most existing works for ground networks, the proposed model is time varying and space oriented. To capture the characteristics of a practical network, we sift through major capacity-impacting constraints and analyze the influence of these constraints. Specifically, we combine the geometric satellite orbit model and satellite tool kit (STK) engineering software to quantify the trends of the capacity constraints. Our objective in analyzing these trends is to provide insights and design guidelines for optimizing the integrated remote wireless sensor and satellite network schedules. Simulation results validate the theoretical analysis of capacity trends and show the optimization opportunities of the IWSSN. PMID:26593919

  17. Capacity Model and Constraints Analysis for Integrated Remote Wireless Sensor and Satellite Network in Emergency Scenarios.

    Science.gov (United States)

    Zhang, Wei; Zhang, Gengxin; Dong, Feihong; Xie, Zhidong; Bian, Dongming

    2015-11-17

    This article investigates the capacity problem of an integrated remote wireless sensor and satellite network (IWSSN) in emergency scenarios. We formulate a general model to evaluate the remote sensor and satellite network capacity. Compared to most existing works for ground networks, the proposed model is time varying and space oriented. To capture the characteristics of a practical network, we sift through major capacity-impacting constraints and analyze the influence of these constraints. Specifically, we combine the geometric satellite orbit model and satellite tool kit (STK) engineering software to quantify the trends of the capacity constraints. Our objective in analyzing these trends is to provide insights and design guidelines for optimizing the integrated remote wireless sensor and satellite network schedules. Simulation results validate the theoretical analysis of capacity trends and show the optimization opportunities of the IWSSN.

  18. Scenario development for the Waste Isolation Pilot Plant: Building confidence in the assessment

    International Nuclear Information System (INIS)

    Galson, D.A.; Swift, P.N.

    1994-01-01

    Scenario developments is part of the iterative performance assessment (PA) process for the Waste Isolation Pilot Plant (WIPP). Scenario development for the WIPP has been the subject of intense external review, and is certain to be the subject of continued scrutiny as the project proceeds toward regulatory compliance. The principal means of increasing confidence is this aspect of the PA will be through the use of a systematic and thorough procedure toward developing the scenarios and conceptual models on which the assessment is to be based. Early and ongoing interaction with project reviewers can assist with confidence building. Quality of argument and clarity of presentation in PA will be of key concern. Appropriate tools are required for documenting and tracking assumptions, through a single assessment phase, and between iterative assessment phases. Risks associated with future human actions are of particular concern to the WIPP project, and international consensus on the principles for incorporation of future human actions in assessments would be valuable

  19. Scenario development for the Waste Isolation Pilot Plant: Building confidence in the assessment

    International Nuclear Information System (INIS)

    Galson, D.A.; Swift, P.N.

    1994-07-01

    Scenario development is part of the iterative performance assessment (PA) process for the Waste Isolation Pilot Plant (WIPP). Scenario development for the WIPP has been the subject of intense external review and is certain to be the subject of continued scrutiny as the project proceeds toward regulatory compliance. The principal means of increasing confidence in this aspect of the PA will be through the use of the systematic and thorough procedure toward developing the scenarios and conceptual models on which the assessment is to be based. Early and ongoing interaction with project reviewers can assist with confidence building. Quality of argument and clarity of presentation in PA will be of key concern. Appropriate tools are required for documenting and tracking assumptions, through a single assessment phase, and between iterative assessment phases. Risks associated with future human actions are of particular concern to the WIPP project, and international consensus on the principles for incorporation of future human actions in assessments would be valuable

  20. Remediation strategies after nuclear or radiological accidents: part 2 - accident scenarios for assessing effectiveness of cleanup procedures

    International Nuclear Information System (INIS)

    Rochedo, Elaine R.R.

    2009-01-01

    The selection of protective measures and remediation strategies after an accident needs to be based on previously established criteria, to minimize unnecessary stress and the exposures involved in cleanup operations that are not effective in reducing doses to the public. In a first stage, a database describing the countermeasures has been developed including their efficiency on removing contamination from surfaces. However, to assess the effectiveness of cleanup procedures in reducing doses to members of the public, it was necessary to derive specific scenarios in order to simulate the long term behavior of the material in the environment, since the contribution of different surfaces to doses changes with time after contamination. A basic release and exposure scenario was developed to assess the dose reduction due to the mostly used procedures. Exposure scenarios were selected to fit the surroundings of the Brazilian nuclear power plants in Angra dos Reis. Simulations were performed using SIEM, the integrated system for dose assessment after contamination events, developed at IRD. The contamination of urban environments was assessed for Cs-137, as this was found to be the most relevant long term radionuclide to contribute to doses to member of the public. The effects on reducing external exposures were assessed for periods up to 50 years after the contamination. For agricultural areas, the focus was on ingestion doses from contamination with I-131 for periods up to 1 year after contamination. Results will be complemented on the database in order to support multi-criteria decision making processes after accidents. (author)

  1. Remediation strategies after nuclear or radiological accidents: part 2 - accident scenarios for assessing effectiveness of cleanup procedures

    Energy Technology Data Exchange (ETDEWEB)

    Rochedo, Elaine R.R. [Comissao Nacional de Energia Nuclear (CNEN-RJ), Rio de Janeiro, RJ (Brazil). Coordenacao de Instalacoes Nucleares], e-mail: erochedo@cnen.gov.br; Silva, Diogo N.G.; Wasserman, Maria A.V.; Conti, Luiz F.C. [Instituto de Radioprotecao e Dosimetria (IRD/CNEN-RJ), Rio de Janeiro, RJ (Brazil)], e-mail: dneves@ird.gov.br, e-mail: angelica@ird.gov.br, e-mail: lfcconti@ird.gov.br

    2009-07-01

    The selection of protective measures and remediation strategies after an accident needs to be based on previously established criteria, to minimize unnecessary stress and the exposures involved in cleanup operations that are not effective in reducing doses to the public. In a first stage, a database describing the countermeasures has been developed including their efficiency on removing contamination from surfaces. However, to assess the effectiveness of cleanup procedures in reducing doses to members of the public, it was necessary to derive specific scenarios in order to simulate the long term behavior of the material in the environment, since the contribution of different surfaces to doses changes with time after contamination. A basic release and exposure scenario was developed to assess the dose reduction due to the mostly used procedures. Exposure scenarios were selected to fit the surroundings of the Brazilian nuclear power plants in Angra dos Reis. Simulations were performed using SIEM, the integrated system for dose assessment after contamination events, developed at IRD. The contamination of urban environments was assessed for Cs-137, as this was found to be the most relevant long term radionuclide to contribute to doses to member of the public. The effects on reducing external exposures were assessed for periods up to 50 years after the contamination. For agricultural areas, the focus was on ingestion doses from contamination with I-131 for periods up to 1 year after contamination. Results will be complemented on the database in order to support multi-criteria decision making processes after accidents. (author)

  2. Using MFM methodology to generate and define major accident scenarios for quantitative risk assessment studies

    DEFF Research Database (Denmark)

    Hua, Xinsheng; Wu, Zongzhi; Lind, Morten

    2017-01-01

    to calculate likelihood of each MAS. Combining the likelihood of each scenario with a qualitative risk matrix, each major accident scenario is thereby ranked for consideration for detailed consequence analysis. The methodology is successfully highlighted using part of BMA-process for production of hydrogen......Generating and defining Major Accident Scenarios (MAS) are commonly agreed as the key step for quantitative risk assessment (QRA). The aim of the study is to explore the feasibility of using Multilevel Flow Modeling (MFM) methodology to formulating MAS. Traditionally this is usually done based...

  3. Development of exposure scenarios for CERCLA risk assessments at the Savannah River Site

    Energy Technology Data Exchange (ETDEWEB)

    Nix, D.W.; Immel, J.W. [Westinghouse Savannah River Co., Aiken, SC (United States); Phifer, M.A. [Tennessee Univ., Knoxville, TN (United States). Dept. of Civil Engineering

    1992-12-31

    A CERCLA Baseline Risk Assessment (BRA) is performed to determine if there are any potential risks to human health and the environment from waste unit at SRS. The SRS has numerous waste units to evaluate in the RFMU and CMS/FS programs and, in order to provide a consistent approach, four standard exposure scenarios were developed for exposure assessments to be used in human health risk assessments. The standard exposure scenarios are divided into two temporal categories: (a) Current Land Use in the BRA, and (b) Future Land Use in the RERA. The Current Land Use scenarios consist of the evaluation of human health risk for Industrial Exposure (of a worker not involved in waste unit characterization or remediation), a Trespasser, a hypothetical current On-site Resident, and an Off-site Resident. The Future Land Use scenario considers exposure to an On-site Resident following termination of institutional control in the absence of any remedial action (No Action Alternative), as well as evaluating potential remedial alternatives against the four scenarios from the BRA. A critical facet in the development of a BRA or RERA is the scoping of exposure scenarios that reflect actual conditions at a waste unit, rather than using factors such as EPA Standard Default Exposure Scenarios (OSWER Directive 9285.6-03) that are based on upper-bound exposures that tend to reflect worst case conditions. The use of site-specific information for developing risk assessment exposure scenarios will result in a more realistic estimate of Reasonable Maximum Exposure for SRS waste units.

  4. Development of exposure scenarios for CERCLA risk assessments at the Savannah River Site

    International Nuclear Information System (INIS)

    Nix, D.W.; Immel, J.W.; Phifer, M.A.

    1992-01-01

    A CERCLA Baseline Risk Assessment (BRA) is performed to determine if there are any potential risks to human health and the environment from waste unit at SRS. The SRS has numerous waste units to evaluate in the RFMU and CMS/FS programs and, in order to provide a consistent approach, four standard exposure scenarios were developed for exposure assessments to be used in human health risk assessments. The standard exposure scenarios are divided into two temporal categories: (a) Current Land Use in the BRA, and (b) Future Land Use in the RERA. The Current Land Use scenarios consist of the evaluation of human health risk for Industrial Exposure (of a worker not involved in waste unit characterization or remediation), a Trespasser, a hypothetical current On-site Resident, and an Off-site Resident. The Future Land Use scenario considers exposure to an On-site Resident following termination of institutional control in the absence of any remedial action (No Action Alternative), as well as evaluating potential remedial alternatives against the four scenarios from the BRA. A critical facet in the development of a BRA or RERA is the scoping of exposure scenarios that reflect actual conditions at a waste unit, rather than using factors such as EPA Standard Default Exposure Scenarios (OSWER Directive 9285.6-03) that are based on upper-bound exposures that tend to reflect worst case conditions. The use of site-specific information for developing risk assessment exposure scenarios will result in a more realistic estimate of Reasonable Maximum Exposure for SRS waste units

  5. Scenario Development and Delphi Application in Life Cycle Assessment for Assessing Environmental Impact of New Technology Case Study: Removal of Wind Turbines Project

    Directory of Open Access Journals (Sweden)

    Devina Fitrika Dewi

    2016-05-01

    Full Text Available Certain technology is intended to create eco-efficient products or process or is developed as answer to the recent challenge. This kind of technology consequently can also create another impact therefore it shall be assessed and analyzed.The focus of the study is on assessment method namely Life Cycle Analysis (LCA, Scenario development and Delphi application. The objective is to understand benefits and drawbacks of the combined methodology and observe practicality of its implementation for assessing new technology. The distinctive feature comes from the combination of social and technological foresight (as Delphi application and future studies (as Scenario development which are applied in the environmental assessment of a product (by Life Cycle Analysis.The utilization of LCA-Scenario-Delphi case study as an explanatory example is presented in the Removal Wind Turbines Project by the Danish Energy Agency. The wind turbine is considered new technology with some of it phases are yet to occur, for example: removal of turbines after phase out stage. Technology Assessment by LCA-Scenario-Delphi is complicated procedure, but necessary to validate the results. The drawbacks of this procedure are extensive time it consumes and the dependency on public participation and/or expert willingness to participate. Nonetheless, its advantages are due to its interactive feature; integration of knowledge from different areas of expertise and its assessment’s characteristic which focuses on process.

  6. Cyber/Physical Security Vulnerability Assessment Integration

    International Nuclear Information System (INIS)

    MacDonald, Douglas G.; Key, Brad; Clements, Samuel L.; Hutton, William J.; Craig, Philip A.; Patrick, Scott W.; Crawford, Cary E.

    2011-01-01

    This internally funded Laboratory-Directed R and D project by the Pacific Northwest National Laboratory, in conjunction with QinetiQ North America, is intended to identify and properly assess areas of overlap (and interaction) in the vulnerability assessment process between cyber security and physical protection. Existing vulnerability analysis (VA) processes and software tools exist, and these are heavily utilized in the determination of predicted vulnerability within the physical and cyber security domains. These determinations are normally performed independently of one another, and only interact on a superficial level. Both physical and cyber security subject matter experts have come to realize that though the various interactive elements exist, they are not currently quantified in most periodic security assessments. This endeavor aims to evaluate both physical and cyber VA techniques and provide a strategic approach to integrate the interdependent relationships of each into a single VA capability. This effort will also transform the existing suite of software currently utilized in the physical protection world to more accurately quantify the risk associated with a blended attack scenario. Performance databases will be created to support the characterization of the cyber security elements, and roll them into prototype software tools. This new methodology and software capability will enable analysts to better identify and assess the overall risk during a vulnerability analysis.

  7. Finding the Optimum Scenario in Risk-benefit Assessment: An Example on Vitamin D

    DEFF Research Database (Denmark)

    Berjia, Firew Lemma; Hoekstra, J.; Verhagen, H.

    2014-01-01

    an optimum scenario that provides maximum net health gain in health risk-benefit assessment of dietary exposure as expressed by serum vitamin D level. With regard to the vitamin D assessment, a considerable health gain is observed due to the reduction of risk of other cause mortality, fall and hip fractures......Background: In risk-benefit assessment of food and nutrients, several studies so far have focused on comparison of two scenarios to weigh the health effect against each other. One obvious next step is finding the optimum scenario that provides maximum net health gains. Aim: This paper aims to show...... that provides maximum net health gains. As a common health metric, Disability Adjusted Life Years (DALY) has been used to project the net health effect by using the QALIBRA (Quality of Life for Benefit Risk Assessment) software. Results: The method used in the vitamin D example shows that it is feasible to find...

  8. Scenario analysis for the postclosure assessment of the Canadian concept for nuclear fuel waste disposal

    Energy Technology Data Exchange (ETDEWEB)

    Goodwin, B W; Stephens, M E; Davison, C C; Johnson, L H; Zach, R

    1994-12-01

    AECL Research has developed and evaluated a concept for disposal of Canada`s nuclear fuel waste involving deep underground disposal of the waste in intrusive igneous rock of the Canadian Shield. The postclosure assessment of this concept focusses on the effects on human health and the environment due to potential contaminant releases into the biosphere after the disposal vault is closed. Both radiotoxic and chemically toxic contaminants are considered. One of the steps in the postclosure assessment process is scenario analysis. Scenario analysis identifies factors that could affect the performance of the disposal system and groups these factors into scenarios that require detailed quantitative evaluation. This report documents a systematic procedure for scenario analysis that was developed for the postclosure assessment and then applied to the study of a hypothetical disposal system. The application leads to a comprehensive list of factors and a set of scenarios that require further quantitative study. The application also identifies a number of other factors and potential scenarios that would not contribute significantly to environmental and safety impacts for the hypothetical disposal system. (author). 46 refs., 3 tabs., 3 figs., 2 appendices.

  9. Scenario analysis for the postclosure assessment of the Canadian concept for nuclear fuel waste disposal

    International Nuclear Information System (INIS)

    Goodwin, B.W.; Stephens, M.E.; Davison, C.C.; Johnson, L.H.; Zach, R.

    1994-12-01

    AECL Research has developed and evaluated a concept for disposal of Canada's nuclear fuel waste involving deep underground disposal of the waste in intrusive igneous rock of the Canadian Shield. The postclosure assessment of this concept focusses on the effects on human health and the environment due to potential contaminant releases into the biosphere after the disposal vault is closed. Both radiotoxic and chemically toxic contaminants are considered. One of the steps in the postclosure assessment process is scenario analysis. Scenario analysis identifies factors that could affect the performance of the disposal system and groups these factors into scenarios that require detailed quantitative evaluation. This report documents a systematic procedure for scenario analysis that was developed for the postclosure assessment and then applied to the study of a hypothetical disposal system. The application leads to a comprehensive list of factors and a set of scenarios that require further quantitative study. The application also identifies a number of other factors and potential scenarios that would not contribute significantly to environmental and safety impacts for the hypothetical disposal system. (author). 46 refs., 3 tabs., 3 figs., 2 appendices

  10. Using scenarios of North Slope energy and resource development to assess research and monitoring needs

    Science.gov (United States)

    Payne, J. F.

    2016-12-01

    Significant Arctic environmental and socio-economic change has been observed on the North Slope of Alaska, presenting challenges for resident communities and management agencies that need to adapt to future changes that are difficult to model or predict. Continued climate change coupled with new or modified energy development could substantially alter the landscape and ecosystem in the future. The North Slope Science Initiative (NSSI) recognized the value of using a participatory scenarios process to consider plausible future energy and resource development scenarios through the year 2040 to help identify and prioritize research and monitoring needs on the North Slope. The scenarios process engaged diverse stakeholders, including subject matter experts and local knowledge holders. Through identification and ranking of key drivers and uncertainties relevant to the focus of the study, a series of spatially explicit scenarios was developed, analyzed in terms of low, medium and high development activities. Climate change and economic factors were key drivers affecting plausible energy development scenarios. The implications from each of the scenarios were then used to identify important research and monitoring activities and their relevant spatial scales. The scenarios project identified over 40 research and monitoring needs. The top five research needs addressed data gaps and key concerns related to how the scenarios could affect: hunting and trapping on land, health and community well-being, permafrost and hydrology, marine mammal subsistence and potential marine oil spills. The use of a participatory scenarios process was essential for identifying a range of plausible energy and resource development scenarios using a framework that involved a systematic assessment of complex interacting drivers of change, consideration of key uncertainties, and transparency throughout the project.

  11. Construction of climate change scenarios from transient climate change experiments for the IPCC impacts assessment

    International Nuclear Information System (INIS)

    Viner, D.; Hulme, M.; Raper, S.C.B.; Jones, P.D.

    1994-01-01

    This paper outlines the different methods which may be used for the construction of regional climate change scenarios. The main focus of the paper is the construction of global climate change scenarios from climate change experiments carried out using General Circulation Models (GCMS) An introduction to some GCM climate change experiments highlights the difference between model types and experiments (e.g., equilibrium or transient). The latest generation of climate change experiments has been performed using fully coupled ocean-atmosphere GCMS. These allow transient simulations of climate change to be performed with respect to a given greenhouse gas forcing scenario. There are, however, a number of problems with these simulations which pose difficulties for the construction of climate change scenarios for use in climate change impacts assessment. The characteristics of the transient climate change experiments which pose difficulties for the construction of climate change scenarios are discussed. Three examples of these problems are: different climate change experiments use different greenhouse gas concentration scenarios; the 'cold-start' problem makes it difficult to link future projections of climate change to a given calendar year; a drift of the climate is noticeable in the control simulations. In order to construct climate change scenarios for impacts assessment a method has therefore to be employed which addresses these problems. At present the climate modeling and climate change impacts communities are somewhat polarized in their approach to spatial scales. Current GCMs model the climate at resolutions larger than 2.5 x 3.75 degree, while the majority of impacts assessment studies are undertaken at scales below 50km (or 0.5 degree). This paper concludes by addressing the problems in bringing together these two different modeling perspectives by presenting a number of regional climate change scenarios. 35 refs., 8 figs., 2 tabs

  12. Decommissioning of offshore oil and gas facilities: a comparative assessment of different scenarios.

    Science.gov (United States)

    Ekins, Paul; Vanner, Robin; Firebrace, James

    2006-06-01

    A material and energy flow analysis, with corresponding financial flows, was carried out for different decommissioning scenarios for the different elements of an offshore oil and gas structure. A comparative assessment was made of the non-financial (especially environmental) outcomes of the different scenarios, with the reference scenario being to leave all structures in situ, while other scenarios envisaged leaving them on the seabed or removing them to shore for recycling and disposal. The costs of each scenario, when compared with the reference scenario, give an implicit valuation of the non-financial outcomes (e.g. environmental improvements), should that scenario be adopted by society. The paper concludes that it is not clear that the removal of the topsides and jackets of large steel structures to shore, as currently required by regulations, is environmentally justified; that concrete structures should certainly be left in place; and that leaving footings, cuttings and pipelines in place, with subsequent monitoring, would also be justified unless very large values were placed by society on a clear seabed and trawling access.

  13. US National Climate Assessment (NCA) Scenarios for Assessing Our Climate Future: Issues and Methodological Perspectives Background Whitepaper for Participants

    Energy Technology Data Exchange (ETDEWEB)

    Moss, Richard H.; Engle, Nathan L.; Hall, John; Jacobs, Kathy; Lempert, Rob; Mearns, L. O.; Melillo, Jerry; Mote, Phil; O' Brien, Sheila; Rosenzweig, C.; Ruane, Alex; Sheppard, Stephen; Vallario, Robert W.; Wiek, Arnim; Wilbanks, Thomas

    2011-10-01

    This whitepaper is intended to provide a starting point for discussion at a workshop for the National Climate Assessment (NCA) that focuses on the use and development of scenarios. The paper will provide background needed by participants in the workshop in order to review options for developing and using scenarios in NCA. The paper briefly defines key terms and establishes a conceptual framework for developing consistent scenarios across different end uses and spatial scales. It reviews uses of scenarios in past U.S. national assessments and identifies potential users of and needs for scenarios for both the report scheduled for release in June 2013 and to support an ongoing distributed assessment process in sectors and regions around the country. Because scenarios prepared for the NCA will need to leverage existing research, the paper takes account of recent scientific advances and activities that could provide needed inputs. Finally, it considers potential approaches for providing methods, data, and other tools for assessment participants. We note that the term 'scenarios' has many meanings. An important goal of the whitepaper (and portions of the workshop agenda) is pedagogical (i.e., to compare different meanings and uses of the term and make assessment participants aware of the need to be explicit about types and uses of scenarios). In climate change research, scenarios have been used to establish bounds for future climate conditions and resulting effects on human and natural systems, given a defined level of greenhouse gas emissions. This quasi-predictive use contrasts with the way decision analysts typically use scenarios (i.e., to consider how robust alternative decisions or strategies may be to variation in key aspects of the future that are uncertain). As will be discussed, in climate change research and assessment, scenarios describe a range of aspects of the future, including major driving forces (both human activities and natural processes

  14. Integrated method to optimize well connection and platform placement on a multi-reservoir scenario

    Energy Technology Data Exchange (ETDEWEB)

    Sousa, Sergio Henrique Guerra de; Madeira, Marcelo Gomes; Franca, Martha Salles [Halliburton, Rio de Janeiro, RJ (Brazil); Mota, Rosane Oliveira; Silva, Edilon Ribeiro da; King, Vanessa Pereira Spear [Petroleo Brasileiro S.A. (PETROBRAS), Rio de Janeiro, RJ (Brazil)

    2012-07-01

    This paper describes a workflow created to optimize the platform placement and well-platform connections on a multi reservoir scenario using an integrated reservoir simulator paired with an optimization engine. The proposed methodology describes how a new platform, being incorporated into a pre-existing asset, can be better used to develop newly-discovered fields, while helping increase the production of existing fields by sharing their production load. The sharing of production facilities is highly important in Brazilian offshore assets because of their high price (a few billion dollars per facility) and the fact that total production is usually limited to the installed capacity of liquid processing, which is an important constraint on high water-cut well production rates typical to this region. The case study asset used to present the workflow consists of two deep water oil fields, each one developed by its own production platform, and a newly-discovered field with strong aquifer support that will be entirely developed with a new production platform. Because this new field should not include injector wells owing to the strong aquifer presence, the idea is to consider reconnecting existing wells from the two pre-existing fields to better use the production resources. In this scenario, the platform location is an important optimization issue, as a balance between supporting the production of the planned wells on the new field and the production of re-routed wells from the existing fields must be reached to achieve improved overall asset production. If the new platform is too far away from any interconnected production well, pressure-drop issues along the pipeline might actually decrease production from the existing fields rather than augment it. The main contribution of this work is giving the reader insights on how to model and optimize these complex decisions to generate high-quality scenarios. (author)

  15. A Systematic Approach to Explorative Scenario Analysis in Emergy Assessment with Emphasis on Resilience

    DEFF Research Database (Denmark)

    Kamp, Andreas; Østergård, Hanne

    2016-01-01

    Fossil energy depletion (specifically peak oil) and climate change are imagined to profoundly affect human civilisation. This motivates assessment of resilience, a concept associated with the ability to persist and maintain function. Explorative scenarios may be used to cast light on what......-site renewable inputs, (3) slowly renewable inputs, (4) direct labour and (5) indirect labour. We consider the existing EmA indicators of biophysical efficiency (the unit emergy value, UEV), the degree of dependence on free, renewable, natural flows of energy (%R) and the degree of dependence on local inputs...... systems that rely primarily on on-site renewable resources appear less sensitive to societal changes. The significance of labour inputs varies among scenarios, and a higher percentage of labour inputs leads to increasing UEV in a Green Tech scenario but lower UEV in more radical energy decent scenarios...

  16. Study on probability distribution of fire scenarios in risk assessment to emergency evacuation

    International Nuclear Information System (INIS)

    Chu Guanquan; Wang Jinhui

    2012-01-01

    Event tree analysis (ETA) is a frequently-used technique to analyze the probability of probable fire scenario. The event probability is usually characterized by definite value. It is not appropriate to use definite value as these estimates may be the result of poor quality statistics and limited knowledge. Without addressing uncertainties, ETA will give imprecise results. The credibility of risk assessment will be undermined. This paper presents an approach to address event probability uncertainties and analyze probability distribution of probable fire scenario. ETA is performed to construct probable fire scenarios. The activation time of every event is characterized as stochastic variable by considering uncertainties of fire growth rate and other input variables. To obtain probability distribution of probable fire scenario, Markov Chain is proposed to combine with ETA. To demonstrate the approach, a case study is presented.

  17. Analysis of global warming stabilization scenarios. The Asian-Pacific Integrated Model

    International Nuclear Information System (INIS)

    Kainuma, Mikiko; Morita, Tsuneyuki; Masui, Toshihiko; Takahashi, Kiyoshi; Matsuoka, Yuzuru

    2004-01-01

    This paper analyzes the economic and climatic impacts of the EMF 19 emission scenarios. A reference scenario, three emission scenarios targeting 550 ppmv atmospheric concentration, and three tax scenarios are analyzed. The profiles of energy consumption and economic losses of each policy scenario are compared to the reference scenario. The model also estimates that global mean temperature will increase 1.7-2.9 C in 2100, and the sea level will rise 40-51 cm, compared to the 1990 levels under the EMF scenarios. Impacts on food productivity and malaria infection are estimated to be very severe in some countries in the Asian region

  18. Downscaling SSPs in the GBM Delta - Integrating Science, Modelling and Stakeholders Through Qualitative and Quantitative Scenarios

    Science.gov (United States)

    Allan, Andrew; Barbour, Emily; Salehin, Mashfiqus; Munsur Rahman, Md.; Hutton, Craig; Lazar, Attila

    2016-04-01

    A downscaled scenario development process was adopted in the context of a project seeking to understand relationships between ecosystem services and human well-being in the Ganges-Brahmaputra delta. The aim was to link the concerns and priorities of relevant stakeholders with the integrated biophysical and poverty models used in the project. A 2-stage process was used to facilitate the connection between stakeholders concerns and available modelling capacity: the first to qualitatively describe what the future might look like in 2050; the second to translate these qualitative descriptions into the quantitative form required by the numerical models. An extended, modified SSP approach was adopted, with stakeholders downscaling issues identified through interviews as being priorities for the southwest of Bangladesh. Detailed qualitative futures were produced, before modellable elements were quantified in conjunction with an expert stakeholder cadre. Stakeholder input, using the methods adopted here, allows the top-down focus of the RCPs to be aligned with the bottom-up approach needed to make the SSPs appropriate at the more local scale, and also facilitates the translation of qualitative narrative scenarios into a quantitative form that lends itself to incorporation of biophysical and socio-economic indicators. The presentation will describe the downscaling process in detail, and conclude with findings regarding the importance of stakeholder involvement (and logistical considerations), balancing model capacity with expectations and recommendations on SSP refinement at local levels.

  19. Downscaling SSPs in Bangladesh - Integrating Science, Modelling and Stakeholders Through Qualitative and Quantitative Scenarios

    Science.gov (United States)

    Allan, A.; Barbour, E.; Salehin, M.; Hutton, C.; Lázár, A. N.; Nicholls, R. J.; Rahman, M. M.

    2015-12-01

    A downscaled scenario development process was adopted in the context of a project seeking to understand relationships between ecosystem services and human well-being in the Ganges-Brahmaputra delta. The aim was to link the concerns and priorities of relevant stakeholders with the integrated biophysical and poverty models used in the project. A 2-stage process was used to facilitate the connection between stakeholders concerns and available modelling capacity: the first to qualitatively describe what the future might look like in 2050; the second to translate these qualitative descriptions into the quantitative form required by the numerical models. An extended, modified SSP approach was adopted, with stakeholders downscaling issues identified through interviews as being priorities for the southwest of Bangladesh. Detailed qualitative futures were produced, before modellable elements were quantified in conjunction with an expert stakeholder cadre. Stakeholder input, using the methods adopted here, allows the top-down focus of the RCPs to be aligned with the bottom-up approach needed to make the SSPs appropriate at the more local scale, and also facilitates the translation of qualitative narrative scenarios into a quantitative form that lends itself to incorporation of biophysical and socio-economic indicators. The presentation will describe the downscaling process in detail, and conclude with findings regarding the importance of stakeholder involvement (and logistical considerations), balancing model capacity with expectations and recommendations on SSP refinement at local levels.

  20. Assessing economic impact of storm surge under projected sea level rise scenarios

    Science.gov (United States)

    Del Angel, D. C.; Yoskowitz, D.

    2017-12-01

    Global sea level is expected to rise 0.2-2m by the year 2100. Rising sea level is expected to have a number of impacts such as erosion, saltwater intrusion, and decline in coastal wetlands; all which have direct and indirect socio-economic impact to coastal communities. By 2050, 25% of the world's population will reside within flood-prone areas. These statistics raise a concern for the economic cost that sea level and flooding has on the growing coastal communities. Economic cost of storm surge inundation and rising seas may include loss or damage to public facilities and infrastructure that may become temporarily inaccessible, as well as disruptions to business and services. This goal of this project is to assess economic impacts of storms under four SLR scenarios including low, intermediate-low, intermediate-high, and high (0.2m, 0.5m, 1.2m and 2m, respectively) in the Northern Gulf of Mexico region. To assess flooding impact on communities from storm surge, this project utilizes HAZUS-MH software - a Geographic Information System (GIS)-based modeling tool developed by the Federal Emergency Management Agency - to estimate physical, economic, and social impacts of natural disasters such as floods, earthquakes and hurricanes. The HAZUS database comes integrated with aggregate and site specific inventory which includes: demographic data, general building stock, agricultural statistics, vehicle inventory, essential facilities, transportation systems, utility systems (among other sensitive facilities). User-defined inundation scenarios will serve to identify assets at risk and damage estimates will be generated using the Depth Damage Function included in the HAZUS software. Results will focus on 3 communities in the Gulf and highlight changes in storm flood impact. This approach not only provides a method for economic impact assessment but also begins to create a link between ecosystem services and natural and nature-based features such as wetlands, beaches and dunes

  1. A global assessment of gross and net land change dynamics for current conditions and future scenarios

    Science.gov (United States)

    Fuchs, Richard; Prestele, Reinhard; Verburg, Peter H.

    2018-05-01

    The consideration of gross land changes, meaning all area gains and losses within a pixel or administrative unit (e.g. country), plays an essential role in the estimation of total land changes. Gross land changes affect the magnitude of total land changes, which feeds back to the attribution of biogeochemical and biophysical processes related to climate change in Earth system models. Global empirical studies on gross land changes are currently lacking. Whilst the relevance of gross changes for global change has been indicated in the literature, it is not accounted for in future land change scenarios. In this study, we extract gross and net land change dynamics from large-scale and high-resolution (30-100 m) remote sensing products to create a new global gross and net change dataset. Subsequently, we developed an approach to integrate our empirically derived gross and net changes with the results of future simulation models by accounting for the gross and net change addressed by the land use model and the gross and net change that is below the resolution of modelling. Based on our empirical data, we found that gross land change within 0.5° grid cells was substantially larger than net changes in all parts of the world. As 0.5° grid cells are a standard resolution of Earth system models, this leads to an underestimation of the amount of change. This finding contradicts earlier studies, which assumed gross land changes to appear in shifting cultivation areas only. Applied in a future scenario, the consideration of gross land changes led to approximately 50 % more land changes globally compared to a net land change representation. Gross land changes were most important in heterogeneous land systems with multiple land uses (e.g. shifting cultivation, smallholder farming, and agro-forestry systems). Moreover, the importance of gross changes decreased over time due to further polarization and intensification of land use. Our results serve as an empirical database for

  2. Seismic Hazard Assessment for a Characteristic Earthquake Scenario: Probabilistic-Deterministic Method

    Science.gov (United States)

    mouloud, Hamidatou

    2016-04-01

    The objective of this paper is to analyze the seismic activity and the statistical treatment of seismicity catalog the Constantine region between 1357 and 2014 with 7007 seismic event. Our research is a contribution to improving the seismic risk management by evaluating the seismic hazard in the North-East Algeria. In the present study, Earthquake hazard maps for the Constantine region are calculated. Probabilistic seismic hazard analysis (PSHA) is classically performed through the Cornell approach by using a uniform earthquake distribution over the source area and a given magnitude range. This study aims at extending the PSHA approach to the case of a characteristic earthquake scenario associated with an active fault. The approach integrates PSHA with a high-frequency deterministic technique for the prediction of peak and spectral ground motion parameters in a characteristic earthquake. The method is based on the site-dependent evaluation of the probability of exceedance for the chosen strong-motion parameter. We proposed five sismotectonique zones. Four steps are necessary: (i) identification of potential sources of future earthquakes, (ii) assessment of their geological, geophysical and geometric, (iii) identification of the attenuation pattern of seismic motion, (iv) calculation of the hazard at a site and finally (v) hazard mapping for a region. In this study, the procedure of the earthquake hazard evaluation recently developed by Kijko and Sellevoll (1992) is used to estimate seismic hazard parameters in the northern part of Algeria.

  3. Feature, event, and process screening and scenario development for the yucca mountain total system performance assessment

    International Nuclear Information System (INIS)

    Swift, P.; Barr, G.; Barnard, R.; Rechard, R.; Schenker, A.; Freeze, G.; Burck, P.

    2001-01-01

    Scenario development has two primary purposes in the design and documentation of postclosure performance assessments in a regulatory setting. First, scenario development ensures a sufficiently comprehensive consideration of the possible future states of the system. Second, scenario development identifies the important scenarios that must be considered in quantitative analyses of the total system performance assessment (TSPA). To ensure clear documentation of the treatment of potentially relevant future states of the system in the Yucca Mountain license application (LA), the US Department of Energy (DOE) has chosen to adopt a scenario development process based on the methodology developed by Cranwell et al. (1990) for the US Nuclear Regulatory Commission (NRC). Although the process, described below, has been modified somewhat as a result of experience gained in the last decade, the underlying methodology is consistent with that outlined by the DOE in the 1988 Site Characterization Plan for the Yucca Mountain Project (YMP) (U.S. DOE, 1988). The approach is fundamentally the same as that used in many performance assessments, including the most recent analysis of the Yucca Mountain repository by the NRC (Wescott et al., 1995). The approach has also been used by the DOE for the Waste Isolation Pilot Plant (WIPP) (U.S. DOE, 1996), by the Nuclear Energy Agency (NEA) of the Organisation for Economic Co-Operation and Development (OECD), and by other radioactive waste programs internationally. Section 2.0 of this report describes the scenario development process. Steps in the process are described in Section 2.1, and terms introduced in this section are defined in Section 2.2. The electronic database used to document the process is described in Section 3, and Section 4 provides a summary of the current status of the YMP scenario development work. Section 5 contains acknowledgments, and Section 6 contains a list of the references cited. (authors)

  4. Integrated Assessment for an Integrated Curriculum.

    Science.gov (United States)

    Mockrish, Rob

    1989-01-01

    In a sixth grade science classroom for able students, major grades are broken down into four categories: lab reports, projects, creative writing, and written tests. These four components of assessment structure how the curriculum content is presented. (JDD)

  5. Scenario Simulation-Based Assessment of Trip Difficulty for Urban Residents under Rainstorm Waterlogging

    Directory of Open Access Journals (Sweden)

    Yingyue Sun

    2012-05-01

    Full Text Available In this study, an experiment was performed to assess the trip difficulty for urban residents of different age groups walking in various depths of water, and the data were corroborated with the real urban rainstorm waterlogging scenarios in downtown (Daoli district Ha-Erbin (China. Mathematical models of urban rainstorm waterlogging were constructed using scenario simulation methods, aided by the GIS spatial analysis technology and hydrodynamic analysis of the waterway systems in the study area. Then these models were used to evaluate the impact of waterlogging on the safety of residents walking in the affected area. Results are summarized as: (1 for an urban rainstorm waterlogging scenario reoccurring once every 10 years, three grid regions would have waterlogging above 0.5 m moving at a velocity of 1.5 m/s. Under this scenario, waterlogging would accumulate on traffic roads only in small areas, affecting the safety and mobility of residents walking in the neighborhood; (2 for an urban rainstorm waterlogging scenario reoccurring once every 20 years, 13 grids experienced the same waterlogging situation affecting a larger area of the city; (3 for an urban rainstorm waterlogging scenario reoccurring once every 50 years, 86 grid regions were affected (waterlogging above 0.5 m moving at 1.5 m/s, and those areas would become impassable for residents.

  6. Environmental and climate security: improving scenario methodologies for science and risk assessment

    Science.gov (United States)

    Briggs, C. M.; Carlsen, H.

    2010-12-01

    Governments and popular discussions have increasingly referred to concepts of ‘climate security’, often with reference to IPCC data. Development of effective methodologies to translate complex, scientific data into risk assessments has lagged, resulting in overly simplistic political assumptions of potential impacts. Climate security scenarios have been developed for use by security and military agencies, but effective engagement by scientific communities requires an improved framework. Effective use of data requires improvement both of climate projections, and the mapping of cascading impacts across interlinked, complex systems. In this research we propose a process for systematic generation of subsets of scenarios (of arbitrary size) from a given set of variables with possible interlinkages. The variables could include climatic changes as well as other global changes of concerns in a security context. In coping with possible challenges associated with the nexus of climate change and security - where deep structural uncertainty and possible irreversible changes are of primary interest - it is important to explore the outer limits of the relevant uncertainties. Therefore the proposed process includes a novel method that will help scenario developers in generating scenario sets where the scenarios are in a quantifiable sense maximally different and therefore best ‘span’ the whole set of scenarios. When downscaled onto a regional level, this process can provide guidance to potentially significant and abrupt geophysical changes, where high uncertainty has often prevented communication of risks. Potential physical changes can then be used as starting points for mapping cascading effects across networks, including topological analysis to identify critically vulnerable nodes and fragile systems, the existence of positive or negative feedback loops, and possible intervention points. Advanced knowledge of both potential geo-physical shifts and related non

  7. Study of impurity effects on CFETR steady-state scenario by self-consistent integrated modeling

    Science.gov (United States)

    Shi, Nan; Chan, Vincent S.; Jian, Xiang; Li, Guoqiang; Chen, Jiale; Gao, Xiang; Shi, Shengyu; Kong, Defeng; Liu, Xiaoju; Mao, Shifeng; Xu, Guoliang

    2017-12-01

    Impurity effects on fusion performance of China fusion engineering test reactor (CFETR) due to extrinsic seeding are investigated. An integrated 1.5D modeling workflow evolves plasma equilibrium and all transport channels to steady state. The one modeling framework for integrated tasks framework is used to couple the transport solver, MHD equilibrium solver, and source and sink calculations. A self-consistent impurity profile constructed using a steady-state background plasma, which satisfies quasi-neutrality and true steady state, is presented for the first time. Studies are performed based on an optimized fully non-inductive scenario with varying concentrations of Argon (Ar) seeding. It is found that fusion performance improves before dropping off with increasing {{Z}\\text{eff}} , while the confinement remains at high level. Further analysis of transport for these plasmas shows that low-k ion temperature gradient modes dominate the turbulence. The decrease in linear growth rate and resultant fluxes of all channels with increasing {{Z}\\text{eff}} can be traced to impurity profile change by transport. The improvement in confinement levels off at higher {{Z}\\text{eff}} . Over the regime of study there is a competition between the suppressed transport and increasing radiation that leads to a peak in the fusion performance at {{Z}\\text{eff}} (~2.78 for CFETR). Extrinsic impurity seeding to control divertor heat load will need to be optimized around this value for best fusion performance.

  8. Integrating the views and perceptions of UK energy professionals in future energy scenarios to inform policymakers

    International Nuclear Information System (INIS)

    Parkes, Gareth; Spataru, Catalina

    2017-01-01

    The Energy Institute (EI) developed its first Energy Barometer survey in 2015 which aims to understand professionals’ views and opinions of energy priorities, policies and technologies. 543 UK energy professionals from across the energy sector were surveyed. Following the survey, 79% of UK energy professionals believe their sector is not effectively communicating with the public. This suggests there is an urgent need to better understand how to use surveys in a more methodological way. Developed in conjunction with the EI, this paper presents the Energy Barometer survey methodology and results to achieve a better understanding of UK energy professionals’ current perceptions and future priorities. The paper makes two contributions to enhance the UK's energy debate. First, it provides the first results in a longitudinal assessment of energy professionals’ views of energy policy issues and discusses the implications for future policymaking. Second, it identifies opportunities for Energy Barometer findings to feed into scenarios development. A comparison with other studies was undertaken. It has been shown that the views of professionals working across the sector are aligned with decentralised approaches to decarbonisation. In particular, professionals expect action from policymakers to coordinate, engage with and encourage investment in energy efficiency. - Highlights: • 543 UK energy professionals from across the energy sector were surveyed. • Aiming to better understand views and opinions of energy priorities, policies and technologies. • A comparison of the methodology and results with other studies was undertaken. • Considers contributions of results to energy system scenario development. • Identifies particular need for increased energy efficiency investment.

  9. QTI for self-assessment and embeddedassessment in competence oriented scenarios: The Agora Case

    NARCIS (Netherlands)

    Santos, Patricia; Llobet, Wenceslao; Hernández-Leo, Davinia; Blat, Josep

    2009-01-01

    Santos, P., Llobet, W., Hernández-Leo, D., & Blat J. (2009). QTI for self-assessment and embeddedassessment in competence oriented scenarios: The Agora Case. Proceedings of the International Conference on Intelligent Networking and Collaborative Systems (INCoS 2009). November, 4-6, 2009, Barcelona,

  10. Livrable D6.1 of the PERSEE project : Perceptual Assessment : Definition of the scenarios

    OpenAIRE

    Wang , Junle; Gautier , Josselin; Bosc , Emilie; Li , Jing; Ricordel , Vincent

    2011-01-01

    62; Livrable D6,1 du projet ANR PERSEE; Ce rapport a été réalisé dans le cadre du projet ANR PERSEE (n° ANR-09-BLAN-0170). Exactement il correspond au livrable D6.1 du projet. Son titre : Perceptual Assessment : Definition of the scenarios

  11. Choosing and using climate change scenarios for ecological-impact assessments and conservation decisions

    Science.gov (United States)

    Amy K. Snover,; Nathan J. Mantua,; Littell, Jeremy; Michael A. Alexander,; Michelle M. McClure,; Janet Nye,

    2013-01-01

    Increased concern over climate change is demonstrated by the many efforts to assess climate effects and develop adaptation strategies. Scientists, resource managers, and decision makers are increasingly expected to use climate information, but they struggle with its uncertainty. With the current proliferation of climate simulations and downscaling methods, scientifically credible strategies for selecting a subset for analysis and decision making are needed. Drawing on a rich literature in climate science and impact assessment and on experience working with natural resource scientists and decision makers, we devised guidelines for choosing climate-change scenarios for ecological impact assessment that recognize irreducible uncertainty in climate projections and address common misconceptions about this uncertainty. This approach involves identifying primary local climate drivers by climate sensitivity of the biological system of interest; determining appropriate sources of information for future changes in those drivers; considering how well processes controlling local climate are spatially resolved; and selecting scenarios based on considering observed emission trends, relative importance of natural climate variability, and risk tolerance and time horizon of the associated decision. The most appropriate scenarios for a particular analysis will not necessarily be the most appropriate for another due to differences in local climate drivers, biophysical linkages to climate, decision characteristics, and how well a model simulates the climate parameters and processes of interest. Given these complexities, we recommend interaction among climate scientists, natural and physical scientists, and decision makers throughout the process of choosing and using climate-change scenarios for ecological impact assessment.

  12. Assessing the Psychometric Properties of a Scenario-Based Measure of Achievement Guilt and Shame

    Science.gov (United States)

    Thompson, Ted; Sharp, Jessica; Alexander, James

    2008-01-01

    In this study, the psychometric properties of the scenario-based Achievement Guilt and Shame Scale (AGSS) were established. The AGSS and scales assessing interpersonal guilt and shame, high standards, overgeneralization, self-criticism, self-esteem, academic self-concept, fear of failure, and tendency to respond in a socially desirable manner were…

  13. Integrating climate change in transportation and land use scenario planning : an example from central New Mexico

    Science.gov (United States)

    2015-04-01

    The Central New Mexico Climate Change Scenario Planning Project, an Interagency Transportation, Land Use, and Climate Change Initiative, utilized a scenario planning process to develop a multiagency transportation- and land use-focused development st...

  14. Pesticide exposure assessment for surface waters in the EU. Part 2: Determination of statistically based run-off and drainage scenarios for Germany.

    Science.gov (United States)

    Bach, Martin; Diesner, Mirjam; Großmann, Dietlinde; Guerniche, Djamal; Hommen, Udo; Klein, Michael; Kubiak, Roland; Müller, Alexandra; Preuss, Thomas G; Priegnitz, Jan; Reichenberger, Stefan; Thomas, Kai; Trapp, Matthias

    2017-05-01

    In order to assess surface water exposure to active substances of plant protection products (PPPs) in the European Union (EU), the FOCUS (FOrum for the Co-ordination of pesticide fate models and their USe) surface water workgroup introduced four run-off and six drainage scenarios for Step 3 of the tiered FOCUSsw approach. These scenarios may not necessarily represent realistic worst-case situations for the different Member States of the EU. Hence, the suitability of the scenarios for risk assessment in the national authorisation procedures is not known. Using Germany as an example, the paper illustrates how national soil-climate scenarios can be developed to model entries of active substances into surface waters from run-off and erosion (using the model PRZM) and from drainage (using the model MACRO). In the authorisation procedure for PPPs on Member State level, such soil-climate scenarios can be used to determine exposure endpoints with a defined overall percentile. The approach allows the development of national specific soil-climate scenarios and to calculate percentile-based exposure endpoints. The scenarios have been integrated into a software tool analogous to FOCUS-SWASH which can be used in the future to assess surface water exposure in authorisation procedures of PPPs in Germany. © 2017 The Authors. Pest Management Science published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry. © 2017 The Authors. Pest Management Science published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

  15. Electricity and heat system development scenarios integrated in the energy system sustainable development in Romania in the period 2005 - 2025

    International Nuclear Information System (INIS)

    Marin, Otilia; Leca, Aureliu

    2004-01-01

    After 50 years of centralized economy, since 1989, Romania faces many challenges related to the internal conditions and to the new trends in energy markets over the world as: the existing low efficiency and availability, fast structural changes; the decentralization and privatization of the energy sector with new structures and entities; integration in EU and NATO structures. At present, with transition from the national vertical integrated monopolies to an open market, the determination of the global optimum development scenario of the power and heat sector becomes more important in order to find the policy which can lead the own strategies of different companies involved on market to a sustainable development of the society. The paper presents four long term development scenarios of the electricity and heat sector quantified from different points of view: technical, economical, environmental, social criteria, security of supply, risk diminishing etc and it continues by determining the long term global optimum development scenario integrated in the sustainable energy system. (authors)

  16. Vulnerabilities to agricultural production shocks: An extreme, plausible scenario for assessment of risk for the insurance sector

    Directory of Open Access Journals (Sweden)

    Tobias Lunt

    2016-01-01

    Full Text Available Climate risks pose a threat to the function of the global food system and therefore also a hazard to the global financial sector, the stability of governments, and the food security and health of the world’s population. This paper presents a method to assess plausible impacts of an agricultural production shock and potential materiality for global insurers. A hypothetical, near-term, plausible, extreme scenario was developed based upon modules of historical agricultural production shocks, linked under a warm phase El Niño-Southern Oscillation (ENSO meteorological framework. The scenario included teleconnected floods and droughts in disparate agricultural production regions around the world, as well as plausible, extreme biotic shocks. In this scenario, global crop yield declines of 10% for maize, 11% for soy, 7% for wheat and 7% for rice result in quadrupled commodity prices and commodity stock fluctuations, civil unrest, significant negative humanitarian consequences and major financial losses worldwide. This work illustrates a need for the scientific community to partner across sectors and industries towards better-integrated global data, modeling and analytical capacities, to better respond to and prepare for concurrent agricultural failure. Governments, humanitarian organizations and the private sector collectively may recognize significant benefits from more systematic assessment of exposure to agricultural climate risk.

  17. Projecting county-level populations under three future scenarios: a technical document supporting the Forest Service 2010 RPA Assessment

    Science.gov (United States)

    Stanley J. Zarnoch; H. Ken Cordell; Carter J. Betz

    2010-01-01

    County-level population projections from 2010 to 2060 are developed under three national population growth scenarios for reporting in the 2010 Renewable Resources Planning Act (RPA) Assessment. These population growth scenarios are tied to global futures scenarios defined by the Intergovernmental Panel on Climate Change (IPCC), a program within the United Nations...

  18. Development of exposure scenarios for CERCLA risk assessments at the Savannah River Site (U)

    International Nuclear Information System (INIS)

    Nix, D.W.; Immel, J.W.; Phifer, M.A.

    1992-01-01

    Environmental Restoration (ER) activities at the Savannah River Site (SRS) begin with the characterization of inactive hazardous, radioactive and mixed waste disposal areas by a combined Resource Conservation Recovery Act (RCRA) Facility Investigation (RFI)/Comprehensive Environmental Response, Compensation and Liability Act (CERCLA) Remedial Investigation (Rl) followed by evaluation of remedial alternatives in a RCRA Corrective Measures Study (CMS)/CERCLA Feasibility Study (FS). A CERCLA Baseline Risk Assessment (BRA) is performed during the RFVRI characterization to determine if there are any potential risks to human health or the environment from the waste unit. If it is determined that there is need for remedial action, a Risk Evaluation of Remedial Alternatives (RERA) is performed as part of the CMS/FS to provide a basis for selecting a remedy that is protective of human health and the environment. The SRS has numerous waste units to evaluate in the RFI/RI and CMS/FS programs and, in order to provide a consistent approach, four standard exposure scenarios were developed for exposure assessments to be used in human health risk assessments. The standard exposure scenarios are divided into two temporal categories: (a) Current Land Use in the BRA, and (b) Future Land Use in the RERA. The Current Land Use scenarios consist of the evaluation of human health risk for Industrial Exposure (of a worker not involved in waste unit characterization or remediation), a Trespasser, a hypothetical current On-site Resident, and an Off-site Resident. The Future Land Use scenario considers exposure to an On-site Resident following termination of institutional control in the absence of any remedial action (No Action Alternative), as well as evaluating potential remedial alternatives against the four scenarios from the BRA. A critical facet in the development of a BRA or RERA is the seeping of exposure scenarios that reflect actual conditions at a waste unit, rather than using

  19. Securing the future in the anthropocene: A critical analysis of the millennium ecosystem assessment scenarios

    Directory of Open Access Journals (Sweden)

    Robert P. Marzec

    2018-05-01

    Full Text Available This commentary analyzes the ontological character of the United Nations’ Millennium Ecosystem Assessment (2005 and its attempt to imagine business-as-usual and transformative human-environmental futures. The Millennium Ecosystem Assessment (MA constitutes the first and most significant attempt by an international political body to incorporate environmental concerns into the field of imaginative scenario building. In addition to its lengthy report on the threatened status of planetary ecosystems, the MA contains extensive “future scenarios” that imagine how human-environmental relations might unfold over the course of the twenty-first century. These scenarios arise out of the lineage of military scenarios generated during the Cold War, and continue to inform UN assessments in the present. This commentary explores how a politico-military concern for security informs the framework of the scenarios, and limits how the MA characterizes the fundamental human act of narration. In the process, the commentary explores alternative ontologies of narration and how these may lead to more transformative narratological interventions.

  20. Scenario sensitivity analyses performed on the PRESTO-EPA LLW risk assessment models

    International Nuclear Information System (INIS)

    Bandrowski, M.S.

    1988-01-01

    The US Environmental Protection Agency (EPA) is currently developing standards for the land disposal of low-level radioactive waste. As part of the standard development, EPA has performed risk assessments using the PRESTO-EPA codes. A program of sensitivity analysis was conducted on the PRESTO-EPA codes, consisting of single parameter sensitivity analysis and scenario sensitivity analysis. The results of the single parameter sensitivity analysis were discussed at the 1987 DOE LLW Management Conference. Specific scenario sensitivity analyses have been completed and evaluated. Scenario assumptions that were analyzed include: site location, disposal method, form of waste, waste volume, analysis time horizon, critical radionuclides, use of buffer zones, and global health effects

  1. Assessment of disruptive scenarios of a Canadian used fuel repository in crystalline rock

    Energy Technology Data Exchange (ETDEWEB)

    Gobien, M.; Garisto, F.; Hunt, N.; Kremer, E.P. [Nuclear Waste Management Organization (NWMO), Toronto, Ontario (Canada)

    2015-06-15

    The NWMO has recently extended its modelling capabilities by performing simulations for four disruptive scenarios that, to date, have not yet been examined in detail. These scenarios complement those considered in an existing postclosure safety assessment for a conceptual geological repository located in a hypothetical crystalline rock formation. The four new disruptive scenarios are: Shaft Seal Failure, Undetected Fault, Open or Poorly Sealed Borehole and Open Borehole Due to Inadvertent Human Intrusion. All simulations are based on the FRAC3DVS-OPG Site-Scale Model. The Site-Scale Model includes a simplified representation of the full repository and a portion of the surrounding sub-regional flow system. All transport simulations are performed with only the radionuclide I-129. Transport rates to the surface and a domestic water supply well are compared to the Reference Case results from an earlier case study documented in Reference. (author)

  2. Assessment of disruptive scenarios of a Canadian used fuel repository in crystalline rock

    Energy Technology Data Exchange (ETDEWEB)

    Gobien, M.; Garisto, F.; Hunt, N.; Kremer, E.P., E-mail: mgobien@nwmo.ca [Nuclear Waste Management Organization, Toronto, ON (Canada)

    2015-07-01

    The NWMO has recently extended its modelling capabilities by performing simulations for four disruptive scenarios that, to date, have not yet been examined in detail. These scenarios complement those considered in an existing postclosure safety assessment for a conceptual geological repository located in a hypothetical crystalline rock formation. The four new disruptive scenarios are: Shaft Seal Failure, Undetected Fault, Open or Poorly Sealed Borehole and Open Borehole Due to Inadvertent Human Intrusion. All simulations are based on the FRAC3DVS-OPG [1] Site-Scale Model [2]. The Site-Scale Model includes a simplified representation of the full repository and a portion of the surrounding sub-regional flow system. All transport simulations are performed with only the radionuclide I-129. Transport rates to the surface and a domestic water supply well are compared to the Reference Case results from an earlier case study documented in Reference [2]. (author)

  3. Assessment of disruptive scenarios of a Canadian used fuel repository in crystalline rock

    International Nuclear Information System (INIS)

    Gobien, M.; Garisto, F.; Hunt, N.; Kremer, E.P.

    2015-01-01

    The NWMO has recently extended its modelling capabilities by performing simulations for four disruptive scenarios that, to date, have not yet been examined in detail. These scenarios complement those considered in an existing postclosure safety assessment for a conceptual geological repository located in a hypothetical crystalline rock formation. The four new disruptive scenarios are: Shaft Seal Failure, Undetected Fault, Open or Poorly Sealed Borehole and Open Borehole Due to Inadvertent Human Intrusion. All simulations are based on the FRAC3DVS-OPG [1] Site-Scale Model [2]. The Site-Scale Model includes a simplified representation of the full repository and a portion of the surrounding sub-regional flow system. All transport simulations are performed with only the radionuclide I-129. Transport rates to the surface and a domestic water supply well are compared to the Reference Case results from an earlier case study documented in Reference [2]. (author)

  4. Integrated environmental and economic assessment of waste management systems

    DEFF Research Database (Denmark)

    Martinez Sanchez, Veronica

    in the “Optimization approach” the scenarios are the results of an optimization process. • The cost approach describes cost principles and level of LCA integration. Conventional and Environmental LCCs are financial assessments, i.e. include marketed goods/services, but while Environmental LCCs include environmental...... assessment of SWM systems alongside environmental impacts assessment to take budget constrains into account. In light of the need for combined environmental and economic assessment of SWM, this PhD thesis developed a consistent and comprehensive method for integrated environmental and economic assessment...... of SWM technologies and systems. The method resulted from developing further the generic Life Cycle Costing (LCC) framework suggested by Hunkeler et al. (2008) and Swarr et al. (2011) to apply it on the field of SWM. The method developed includes: two modelling approaches (Accounting and Optimization...

  5. Environmental assessment of amine-based carbon capture Scenario modelling with life cycle assessment (LCA)

    Energy Technology Data Exchange (ETDEWEB)

    Brekke, Andreas; Askham, Cecilia; Modahl, Ingunn Saur; Vold, Bjoern Ivar; Johnsen, Fredrik Moltu

    2012-07-01

    This report contains a first attempt at introducing the environmental impacts associated with amines and derivatives in a life cycle assessment (LCA) of gas power production with carbon capture and comparing these with other environmental impacts associated with the production system. The report aims to identify data gaps and methodological challenges connected both to modelling toxicity of amines and derivatives and weighting of environmental impacts. A scenario based modelling exercise was performed on a theoretical gas power plant with carbon capture, where emission levels of nitrosamines were varied between zero (gas power without CCS) to a worst case level (outside the probable range of actual carbon capture facilities). Because of extensive research and development in the areas of solvents and emissions from carbon capture facilities in the latter years, data used in the exercise may be outdated and results should therefore not be taken at face value.The results from the exercise showed: According to UseTox, emissions of nitrosamines are less important than emissions of formaldehyde with regard to toxicity related to operation of (i.e. both inputs to and outputs from) a carbon capture facility. If characterisation factors for emissions of metals are included, these outweigh all other toxic emissions in the study. None of the most recent weighting methods in LCA include characterisation factors for nitrosamines, and these are therefore not part of the environmental ranking.These results shows that the EDecIDe project has an important role to play in developing LCA methodology useful for assessing the environmental performance of amine based carbon capture in particular and CCS in general. The EDecIDe project will examine the toxicity models used in LCA in more detail, specifically UseTox. The applicability of the LCA compartment models and site specificity issues for a Norwegian/Arctic situation will be explored. This applies to the environmental compartments

  6. Integrated Assessment of Carbon Dioxide Removal

    Science.gov (United States)

    Rickels, W.; Reith, F.; Keller, D.; Oschlies, A.; Quaas, M. F.

    2018-03-01

    To maintain the chance of keeping the average global temperature increase below 2°C and to limit long-term climate change, removing carbon dioxide from the atmosphere (carbon dioxide removal, CDR) is becoming increasingly necessary. We analyze optimal and cost-effective climate policies in the dynamic integrated assessment model (IAM) of climate and the economy (DICE2016R) and investigate (1) the utilization of (ocean) CDR under different climate objectives, (2) the sensitivity of policies with respect to carbon cycle feedbacks, and (3) how well carbon cycle feedbacks are captured in the carbon cycle models used in state-of-the-art IAMs. Overall, the carbon cycle model in DICE2016R shows clear improvements compared to its predecessor, DICE2013R, capturing much better long-term dynamics and also oceanic carbon outgassing due to excess oceanic storage of carbon from CDR. However, this comes at the cost of a (too) tight short-term remaining emission budget, limiting the model suitability to analyze low-emission scenarios accurately. With DICE2016R, the compliance with the 2°C goal is no longer feasible without negative emissions via CDR. Overall, the optimal amount of CDR has to take into account (1) the emission substitution effect and (2) compensation for carbon cycle feedbacks.

  7. Integrated discharge scenario for high-temperature helical plasma on LHD

    International Nuclear Information System (INIS)

    Nagaoka, K.; Takahashi, H.; Murakami, S.

    2014-10-01

    Discharge scenario of high temperature plasma with helical configuration has been significantly progressed. The increase of central ion temperature due to reduction of wall recycling was clearly observed. The neutral particle profile was measured with a high-dynamic range of Balmer-α spectroscopy, and the reduction of neutral density was identified after helium conditioning main discharges. The peaking of ion heating profile and the reduction of charge exchange loss of energetic ions play an important role for improvement of ion heat transport in the core. The ion ITB and electron ITB have been successfully integrated due to superposition of centrally focused electron cyclotron heating to the ion ITB plasma, and the high temperature regime of T i ∼T e has been significantly extended. The normalized temperature gradient of ion and electron (R/L T ) were observed to exceed 10, indicating the significant improvement of both ion and electron heat transports at the barrier position. The positive radial electric field was observed by heavy ion beam probe, while the negative radial electric field was observed in ion ITB plasmas. The ion temperature gradient was observed to decrease with the increase of temperature ratio (T e /T i ). This experiment demonstrated that the profile control is a key to combine ion ITB and electron ITB and have a potential to improve the performance of helical plasmas. (author)

  8. Innovative method of RES integration into the regional energy development scenarios

    International Nuclear Information System (INIS)

    Klevas, Valentinas; Biekša, Kestutis; Murauskaitė, Lina

    2014-01-01

    Scarcity or abundance of energy resources usually depends on physical and geographical conditions in the region. However, the energy flow in the region also depends on the efficient use of energy resources, the consumption rate of energy and the possibility to use local renewable and non-renewable energy resources. Production, distribution and the use of energy resources in the region are the challenges for central and local government, business and social service, customers and other stakeholders. Development of regional energy economy should be optimized according to the available energy flow in the region using a network system analysis method, which provides solutions for developing sustainable energy economy models. The network system analysis method enables to optimize the use of local and renewable resources at the regional level and reveals available local energy resources. An efficient use of available regional resources and the use of renewable energy sources (RES) should be the main goals for the development of regional energy system. RES can compete with traditional fossil fuel with the condition that all hidden aspects are revealed. The network system analysis method enables to indicate energy flows in the region as well as indicate pros and cons of using renewable energy technologies. - Highlights: • RES integration into the regional energy development scenarios is done. • Innovative process network system (PNS) analysis method is used. • PNS method is used to optimize the use of local and renewable resources. • Analysis of energy flow in region using PNS method is done

  9. Development of a computer tool to support scenario analysis for safety assessment of HLW geological disposal

    International Nuclear Information System (INIS)

    Makino, Hitoshi; Kawamura, Makoto; Wakasugi, Keiichiro; Okubo, Hiroo; Takase, Hiroyasu

    2007-02-01

    In 'H12 Project to Establishing Technical Basis for HLW Disposal in Japan' a systematic approach that was based on an international consensus was adopted to develop scenarios to be considered in performance assessment. Adequacy of the approach was, in general term, appreciated through the domestic and international peer review. However it was also suggested that there were issues related to improving transparency and traceability of the procedure. To achieve this, improvement of scenario analysis method has been studied. In this study, based on an improvement method for treatment of FEP interaction a computer tool to support scenario analysis by specialists of performance assessment has been developed. Anticipated effects of this tool are to improve efficiency of complex and time consuming scenario analysis work and to reduce possibility of human errors in this work. This tool also enables to describe interactions among a vast number of FEPs and the related information as interaction matrix, and analysis those interactions from a variety of perspectives. (author)

  10. Comparison of the results of climate change impact assessment between RCP8.5 and SSP2 scenarios

    Science.gov (United States)

    Lee, D. K.; Park, J. H.; Park, C.; Kim, S.

    2017-12-01

    Climate change scenarios are mainly published by the Intergovernmental Panel on Climate Change (IPCC), and include SRES (Special Report on Emission Scenario) scenarios (IPCC Third Report), RCP (Representative Concentration Pathways) scenarios (IPCC 5th Report), and SSP (Shared Socioeconomic Pathways) scenarios. Currently widely used RCP scenarios are based on how future greenhouse gas concentrations will change. In contrast, SSP scenarios are that predict how climate change will change in response to socio-economic indicators such as population, economy, land use, and energy change. In this study, based on RCP 8.5 climate data, we developed a new Korean scenario using the future social and economic scenarios of SSP2. In the development of the scenario, not only Korea's emissions but also China and Japan's emissions were considered in terms of space. In addition, GHG emissions and air pollutant emissions were taken into consideration. Using the newly developed scenarios, the impacts assessments of the forest were evaluated and the impacts were evaluated using the RCP scenarios. The average precipitation is similar to the SSP2 scenario and the RCP8.5 scenario, but the SSP2 scenario shows the maximum value is lower than RCP8.5 scenario. This is because the SSP2 scenario simulates the summer precipitation weakly. The temperature distribution is similar for both scenarios, and it can be seen that the average temperature in the 2090s is higher than that in the 2050s. At present, forest net primary productivity of Korea is 693 tC/km2, and it is 679 tC/km2 when SSP2 scenario is applied. Also, the damage of forest by ozone is about 4.1-5.1%. On the other hand, when SSP2 scenario is applied, the forest net primary productivity of Korea is 607 tC/km2 and the forest net primary productivity of RCP8.5 scenario is 657 tC/km2. The analysis shows that the damage caused by climate change is reduced by 14.2% for the SSP2 scenario and 6.9% for the RCP8.5 scenario. The damage caused

  11. Sustainable BECCS pathways evaluated by an integrated assessment model

    Science.gov (United States)

    Kato, E.

    2017-12-01

    Negative emissions technologies, particularly Bioenergy with Carbon Capture and Storage (BECCS), are key components of mitigation strategies in ambitious future socioeconomic scenarios analysed by integrated assessment models. Generally, scenarios aiming to keep mean global temperature rise below 2°C above pre-industrial would require net negative carbon emissions in the end of the 21st century. Also, in the context of Paris agreement which acknowledges "a balance between anthropogenic emissions by sources and removals by sinks of greenhouse gases in the second half of this century", RD&D for the negative emissions technologies in this decade has a crucial role for the possibility of early deployment of the technology. Because of the requirement of potentially extensive use of land and water for producing the bioenergy feedstock to get the anticipated level of gross negative emissions, researches on how to develop sustainable scenarios of BECCS is needed. Here, we present BECCS deployment scenarios that consider economically viable flow of bioenergy system including power generation and conversion process to liquid and gaseous fuels for transportation and heat with consideration of sustainable global biomass use. In the modelling process, detailed bioenergy representations, i.e. various feedstock and conversion technologies with and without CCS, are implemented in an integrated assessment (IA) model GRAPE (Global Relationship Assessment to Protect the Environment). Also, to overcome a general discrepancy about assumed future agricultural yield between 'top-down' IA models and 'bottom-up' estimates, which would crucially affect the land-use pattern, we applied yields change of food and energy crops consistent with process-based biophysical crop models in consideration of changing climate conditions. Using the framework, economically viable strategy for implementing sustainable bioenergy and BECCS flow are evaluated in the scenarios targeting to keep global average

  12. The integration of renewable energies into the German transmission grid—A scenario comparison

    International Nuclear Information System (INIS)

    Schroeder, Andreas; Oei, Pao-Yu; Sander, Aram; Hankel, Lisa; Laurisch, Lilian Charlotte

    2013-01-01

    This article presents a quantitative assessment of the need for electricity transmission capacity investments in Germany for 2030. Congestion is analyzed and its possible relief through appropriate grid reinforcements as those described in the Ten Year Network Development Plan (TYNDP) of the European Commission. Congestion is investigated in three scenarios which differ in the location of power resources and the line expansion projects accomplished. Results show that the TYNDP and overlay line projects proposed in 2011 are not sufficient measures to cope with the increasing demand for transmission capacity. The paper also concludes that if power generation resources are moved closer to demand centers grid bottlenecks can be partly relieved by 2030. The introduction of a high-voltage direct current (HVDC) backbone grid does not relieve congestion significantly. - Highlights: • The need for power transmission capacity in Germany for 2030 is assessed. • The TYNDP is insufficient to cope with increasing demand for transmission. • If generation is moved closer to demand grid bottlenecks are partly relieved. • An HVDC backbone grid does not relieve congestion significantly

  13. Assessment of post closure radioactive safety for the Korean reference disposal system: development of scenarios and quantitative assessment

    International Nuclear Information System (INIS)

    Kang, C. H.; Hwang, Y. S.; Lee, Y. M.

    2005-01-01

    The total system performance assessment (TSPA) on the Korean reference disposal system has been performed for different types of scenarios. Firstly two reference scenarios, the natural discharge and well ones are developed assessed. The natural discharge scenario assumes that a radionuclide is released from a waste container with an average lifetime of 1,000 years by intruding groundwater to a biosphere through a bentonite buffer and a natural barrier composed of a fractured porous rock and a major water conducting feature (MWCF). The well scenario describes that a radionuclide passing through a buffer enters a fractured rock which is intersected with a drinking well. Two scenarios are named as R1 and R2 respectively. The third scenario is for the initial waste container failure case. A waste container is apt to have initial defects during manufacturing and transportation to a deposition hole. The probability function of the ratio of waste container failure is assumed based on the engineering sense. The rest of waste containers are assumed to have full function of isolation of hazardous nuclides during the lifetime. This initial container failure scenario (ICF) has two different variations: one with a lifetime of 1,000 years ana the other with 10,000 years. Two variations are assessed for two different biosphere, natural discharge and well. The forth one is to assess the impact of excavation disturbed zones. Deposition tunnels are excavated by tunnel boring machine (TBM) or controlled blast (CB). The disturbed zone in assumed to be 30 cm and 1 meter for TBN and CB respectively. Six cases are developed for the EDZ scenarios considering all possible combination of changes in permeability a fracture aperture, and a porosity of a fractured rock. The fifth scenario stipulates the change of long term climate (LTC). The ice age assumed to be prevailed again after a few tens of thousand years. The advent of the ice age alters groundwater composition, pathways, and most

  14. Toward refined environmental scenarios for ecological risk assessment of down-the-drain chemicals in freshwater environments.

    Science.gov (United States)

    Franco, Antonio; Price, Oliver R; Marshall, Stuart; Jolliet, Olivier; Van den Brink, Paul J; Rico, Andreu; Focks, Andreas; De Laender, Frederik; Ashauer, Roman

    2017-03-01

    Current regulatory practice for chemical risk assessment suffers from the lack of realism in conventional frameworks. Despite significant advances in exposure and ecological effect modeling, the implementation of novel approaches as high-tier options for prospective regulatory risk assessment remains limited, particularly among general chemicals such as down-the-drain ingredients. While reviewing the current state of the art in environmental exposure and ecological effect modeling, we propose a scenario-based framework that enables a better integration of exposure and effect assessments in a tiered approach. Global- to catchment-scale spatially explicit exposure models can be used to identify areas of higher exposure and to generate ecologically relevant exposure information for input into effect models. Numerous examples of mechanistic ecological effect models demonstrate that it is technically feasible to extrapolate from individual-level effects to effects at higher levels of biological organization and from laboratory to environmental conditions. However, the data required to parameterize effect models that can embrace the complexity of ecosystems are large and require a targeted approach. Experimental efforts should, therefore, focus on vulnerable species and/or traits and ecological conditions of relevance. We outline key research needs to address the challenges that currently hinder the practical application of advanced model-based approaches to risk assessment of down-the-drain chemicals. Integr Environ Assess Manag 2017;13:233-248. © 2016 SETAC. © 2016 SETAC.

  15. Environmental assessment of low-organic waste landfill scenarios by means of life-cycle assessment modelling (EASEWASTE)

    DEFF Research Database (Denmark)

    Manfredi, Simone; Christensen, Thomas Højlund; Scharff, H.

    2010-01-01

    for in the life-cycle impact assessment calculation, the small gas generation in low-organic waste landfills reduced the actual potential for energy generation and therefore the environmental savings obtained were reduced proportionally. Groundwater pollution from input of leachate was also evaluated and the WHO......The environmental performance of two low-organic waste landfill scenarios ('low-organic-energy' and 'low-organic-flare') was developed and compared with two household waste landfill scenarios ('household-energy' and 'household-flare') by means of LCA-modelling. The LCA-modelling was made for 1...

  16. Assessing scenario and parametric uncertainties in risk analysis: a model uncertainty audit

    International Nuclear Information System (INIS)

    Tarantola, S.; Saltelli, A.; Draper, D.

    1999-01-01

    In the present study a process of model audit is addressed on a computational model used for predicting maximum radiological doses to humans in the field of nuclear waste disposal. Global uncertainty and sensitivity analyses are employed to assess output uncertainty and to quantify the contribution of parametric and scenario uncertainties to the model output. These tools are of fundamental importance for risk analysis and decision making purposes

  17. Scenario based approach for multiple source Tsunami Hazard assessment for Sines, Portugal

    OpenAIRE

    M. Wronna; R. Omira; M. A. Baptista

    2015-01-01

    In this paper, we present a scenario-based approach for tsunami hazard assessment for the city and harbour of Sines – Portugal, one of the test-sites of project ASTARTE. Sines holds one of the most important deep-water ports which contains oil-bearing, petrochemical, liquid bulk, coal and container terminals. The port and its industrial infrastructures are facing the ocean southwest towards the main seismogenic sources. This work considers two different seis...

  18. Choosing and using climate-change scenarios for ecological-impact assessments and conservation decisions.

    Science.gov (United States)

    Snover, Amy K; Mantua, Nathan J; Littell, Jeremy S; Alexander, Michael A; McClure, Michelle M; Nye, Janet

    2013-12-01

    Increased concern over climate change is demonstrated by the many efforts to assess climate effects and develop adaptation strategies. Scientists, resource managers, and decision makers are increasingly expected to use climate information, but they struggle with its uncertainty. With the current proliferation of climate simulations and downscaling methods, scientifically credible strategies for selecting a subset for analysis and decision making are needed. Drawing on a rich literature in climate science and impact assessment and on experience working with natural resource scientists and decision makers, we devised guidelines for choosing climate-change scenarios for ecological impact assessment that recognize irreducible uncertainty in climate projections and address common misconceptions about this uncertainty. This approach involves identifying primary local climate drivers by climate sensitivity of the biological system of interest; determining appropriate sources of information for future changes in those drivers; considering how well processes controlling local climate are spatially resolved; and selecting scenarios based on considering observed emission trends, relative importance of natural climate variability, and risk tolerance and time horizon of the associated decision. The most appropriate scenarios for a particular analysis will not necessarily be the most appropriate for another due to differences in local climate drivers, biophysical linkages to climate, decision characteristics, and how well a model simulates the climate parameters and processes of interest. Given these complexities, we recommend interaction among climate scientists, natural and physical scientists, and decision makers throughout the process of choosing and using climate-change scenarios for ecological impact assessment. Selección y Uso de Escenarios de Cambio Climático para Estudios de Impacto Ecológico y Decisiones de Conservación. © 2013 Society for Conservation Biology.

  19. Risk Analysis for Road Tunnels – A Metamodel to Efficiently Integrate Complex Fire Scenarios

    DEFF Research Database (Denmark)

    Berchtold, Florian; Knaust, Christian; Arnold, Lukas

    2018-01-01

    Fires in road tunnels constitute complex scenarios with interactions between the fire, tunnel users and safety measures. More and more methodologies for risk analysis quantify the consequences of these scenarios with complex models. Examples for complex models are the computational fluid dynamics...... complex scenarios in risk analysis. To face this challenge, we improved the metamodel used in the methodology for risk analysis presented on ISTSS 2016. In general, a metamodel quickly interpolates the consequences of few scenarios simulated with the complex models to a large number of arbitrary scenarios...... used in risk analysis. Now, our metamodel consists of the projection array-based design, the moving least squares method, and the prediction interval to quantify the metamodel uncertainty. Additionally, we adapted the projection array-based design in two ways: the focus of the sequential refinement...

  20. Project SAFE. Update of the SFR-1 safety assessment. Phase 1. Appendix A2: Scenarios

    International Nuclear Information System (INIS)

    Skagius, K.; Wiborgh, M.

    1998-01-01

    This appendix gives a short description of the scenario methodology adopted in the previous safety assessment of SFR. Since then new methodologies for developing structured descriptions of how processes and interactions between processes affect the evolution of a repository system. Two such methods are briefly described. These methods are very similar, but they differ in the way the system is graphically structured. One of the methods is based on Process Influence Diagrams, PID, and the other on Interaction matrices. It is proposed that the method based on Interaction matrices is used for the scenario work in project SAFE. The main reason for this is that the method already has been applied by SKB, which means that it will be possible to use already existing procedures and documentation systems. The proposed procedure involves the development of Interaction matrices for a defined Reference scenario and the use of these matrices to illustrate the effect of different Scenario initiating FEPs. The proposed procedure is described in this appendix

  1. Safety case methodology for decommissioning of research reactors. Assessment of the long term impact of a flooding scenario

    International Nuclear Information System (INIS)

    Vladescu, G.; Banciu, O.

    1999-01-01

    The paper contains the assessment methodology of a Safety Case fuel decommissioning of research reactors, taking into account the international approach principles. The paper also includes the assessment of a flooding scenario for a decommissioned research reactor (stage 1 of decommissioning). The scenario presents the flooding of reactor basement, radionuclide migration through environment and long term radiological impact for public. (authors)

  2. Influence of ecohydrologic feedbacks from simulated crop growth on integrated regional hydrologic simulations under climate scenarios

    Science.gov (United States)

    van Walsum, P. E. V.; Supit, I.

    2012-06-01

    Hydrologic climate change modelling is hampered by climate-dependent model parameterizations. To reduce this dependency, we extended the regional hydrologic modelling framework SIMGRO to host a two-way coupling between the soil moisture model MetaSWAP and the crop growth simulation model WOFOST, accounting for ecohydrologic feedbacks in terms of radiation fraction that reaches the soil, crop coefficient, interception fraction of rainfall, interception storage capacity, and root zone depth. Except for the last, these feedbacks are dependent on the leaf area index (LAI). The influence of regional groundwater on crop growth is included via a coupling to MODFLOW. Two versions of the MetaSWAP-WOFOST coupling were set up: one with exogenous vegetation parameters, the "static" model, and one with endogenous crop growth simulation, the "dynamic" model. Parameterization of the static and dynamic models ensured that for the current climate the simulated long-term averages of actual evapotranspiration are the same for both models. Simulations were made for two climate scenarios and two crops: grass and potato. In the dynamic model, higher temperatures in a warm year under the current climate resulted in accelerated crop development, and in the case of potato a shorter growing season, thus partly avoiding the late summer heat. The static model has a higher potential transpiration; depending on the available soil moisture, this translates to a higher actual transpiration. This difference between static and dynamic models is enlarged by climate change in combination with higher CO2 concentrations. Including the dynamic crop simulation gives for potato (and other annual arable land crops) systematically higher effects on the predicted recharge change due to climate change. Crop yields from soils with poor water retention capacities strongly depend on capillary rise if moisture supply from other sources is limited. Thus, including a crop simulation model in an integrated

  3. Integrated Environmental Assessment Part III: ExposureAssessment

    Energy Technology Data Exchange (ETDEWEB)

    McKone, Thomas E.; Small, Mitchell J.

    2006-06-01

    Human exposure assessment is a key step in estimating the environmental and public health burdens that result chemical emissions in the life cycle of an industrial product or service. This column presents the third in a series of overviews of the state of the art in integrated environmental assessment - earlier columns described emissions estimation (Frey and Small, 2003) and fate and transport modeling (Ramaswami, et al., 2004). When combined, these first two assessment elements provide estimates of ambient concentrations in the environment. Here we discuss how both models and measurements are used to translate ambient concentrations into metrics of human and ecological exposure, the necessary precursors to impact assessment. Exposure assessment is the process of measuring and/or modeling the magnitude, frequency and duration of contact between a potentially harmful agent and a target population, including the size and characteristics of that population (IPCS, 2001; Zartarian, et al., 2005). Ideally the exposure assessment process should characterize the sources, routes, pathways, and uncertainties in the assessment. Route of exposure refers to the way that an agent enters the receptor during an exposure event. Humans contact pollutants through three routes--inhalation, ingestion, and dermal uptake. Inhalation occurs in both outdoor environments and indoor environments where most people spend the majority of their time. Ingestion includes both water and food, as well as soil and dust uptake due to hand-to-mouth activity. Dermal uptake occurs through contacts with consumer products; indoor and outdoor surfaces; the water supply during washing or bathing; ambient surface waters during swimming or boating; soil during activities such as work, gardening, and play; and, to a lesser extent, from the air that surrounds us. An exposure pathway is the course that a pollutant takes from an ambient environmental medium (air, soil, water, biota, etc), to an exposure medium

  4. Comparative energy and exergy performance assessments of a microcogenerator unit in different electricity mix scenarios

    International Nuclear Information System (INIS)

    Gonçalves, Pedro; Angrisani, Giovanni; Roselli, Carlo; Gaspar, Adélio R.; Gameiro da Silva, Manuel

    2013-01-01

    Highlights: • Experimental and energy–exergy modelling of a 6 kW micro-combined heat and power unit. • Evaluation of energy and exergy efficiencies for performance assessment. • Use of exergy and energy indicators for comparison with a reference system. • Use of different renewables supply options into the electric and heat reference system. • The electric grid mix of Portugal and Italy is used and discussed. - Abstract: The Directive 2004/8/EC on the promotion of cogeneration proposes a comparative indicator based on primary energy savings, neglecting some important thermodynamic aspects, such as exergy. This study aims to compare and discuss the usefulness of a set of complementary indicators for performance assessments of cogeneration systems, concerning thermodynamic principles based on first and second law (the exergy approach). As case study, a 6 kW electric output micro-combined heat and power unit was experimentally tested and a model of the unit was developed in TRNSYS. Considering as reference a set of different heat and electricity scenarios, including the actual electric mixes of Portugal and Italy, the indicators case incon (PES) and Primary and Total Irreversibilities Savings (PIS and TIS), as well as energy and exergy renewability ratios were assessed and discussed. The results show that the use of MCHP has higher advantages for the Italian electric grid, than an equivalent scenario considering the Portuguese electric network as reference. As result, for a particular scenario analysed, PES and PIS have 3% and 6% for Portugal, and 10% and 18% for Italy, respectively. Furthermore, for one particular scenario evaluated, the indicators energetic and exergetic renewability ratios have 23% and 14%, respectively for the Portuguese electric grid, and 19% and 10% for the Italian electric system

  5. Including the temporal change in PM{sub 2.5} concentration in the assessment of human health impact: Illustration with renewable energy scenarios to 2050

    Energy Technology Data Exchange (ETDEWEB)

    Gschwind, Benoit, E-mail: benoit.gschwind@mines-paristech.fr [Centre Observation, Impacts, Energy, MINES ParisTech, 1 rue Claude Daunesse, CS 10207, F-06904 Sophia Antipolis (France); Lefevre, Mireille, E-mail: mireille.lefevre@mines-paristech.fr [Centre Observation, Impacts, Energy, MINES ParisTech, 1 rue Claude Daunesse, CS 10207, F-06904 Sophia Antipolis (France); Blanc, Isabelle, E-mail: isabelle.blanc@mines-paristech.fr [Centre Observation, Impacts, Energy, MINES ParisTech, 1 rue Claude Daunesse, CS 10207, F-06904 Sophia Antipolis (France); Ranchin, Thierry, E-mail: thierry.ranchin@mines-paristech.fr [Centre Observation, Impacts, Energy, MINES ParisTech, 1 rue Claude Daunesse, CS 10207, F-06904 Sophia Antipolis (France); Wyrwa, Artur, E-mail: awyrwa@agh.edu.pl [AGH University of Science and Technology, Al. Mickiewicza 30, Krakow 30-059 (Poland); Drebszok, Kamila [AGH University of Science and Technology, Al. Mickiewicza 30, Krakow 30-059 (Poland); Cofala, Janusz, E-mail: cofala@iiasa.ac.at [International Institute for Applied Systems Analysis, Schlossplatz 1, 2067 Laxenburg (Austria); Fuss, Sabine, E-mail: fuss@mcc-berlin.net [International Institute for Applied Systems Analysis, Schlossplatz 1, 2067 Laxenburg (Austria); Mercator Research Institute on Global Commons and Climate Change, Torgauer Str. 12-15, 10829 Berlin (Germany)

    2015-04-15

    This article proposes a new method to assess the health impact of populations exposed to fine particles (PM{sub 2.5}) during their whole lifetime, which is suitable for comparative analysis of energy scenarios. The method takes into account the variation of particle concentrations over time as well as the evolution of population cohorts. Its capabilities are demonstrated for two pathways of European energy system development up to 2050: the Baseline (BL) and the Low Carbon, Maximum Renewable Power (LC-MRP). These pathways were combined with three sets of assumptions about emission control measures: Current Legislation (CLE), Fixed Emission Factors (FEFs), and the Maximum Technically Feasible Reductions (MTFRs). Analysis was carried out for 45 European countries. Average PM{sub 2.5} concentration over Europe in the LC-MRP/CLE scenario is reduced by 58% compared with the BL/FEF case. Health impacts (expressed in days of loss of life expectancy) decrease by 21%. For the LC-MRP/MTFR scenario the average PM{sub 2.5} concentration is reduced by 85% and the health impact by 34%. The methodology was developed within the framework of the EU's FP7 EnerGEO project and was implemented in the Platform of Integrated Assessment (PIA). The Platform enables performing health impact assessments for various energy scenarios. - Highlights: • A new method to assess health impact of PM{sub 2.5} for energy scenarios is proposed. • An algorithm to compute Loss of Life Expectancy attributable to exposure to PM{sub 2.5} is depicted. • Its capabilities are demonstrated for two pathways of European energy system development up to 2050. • Integrating the temporal evolution of PM{sub 2.5} is of great interest for assessing the potential impacts of energy scenarios.

  6. TURVA-2012: Assessment of radionuclide release scenarios for the repository system

    International Nuclear Information System (INIS)

    Smith, Paul; Poteri, Antti; Nordman, Henrik; Cormenzana, Jose Luis; Snellman, Margit; Marcos, Nuria; Hjerpe, Thomas; Koskinen, Lasse

    2014-01-01

    TURVA-2012 is Posiva's safety case in support of the Preliminary Safety Analysis Report (PSAR) and application for a construction licence for a repository for disposal of spent nuclear fuel at the Olkiluoto site in south-western Finland. This paper gives a summary of the analyses of the radionuclide release scenarios formulated in a companion paper, TURVA-2012: Formulation of Radionuclide Release Scenarios (Marcos, 2014). The scenarios and the analyses take into account major uncertainties in the initial state of the barriers and possible paths for the evolution of the repository system identified in a further paper: TURVA-2012: Performance Assessment (Hellae, 2014). For each scenario, calculation cases are analysed to evaluate compliance of the proposed repository with regulatory requirements on radiological protection, as well as to illustrate the impact of specific uncertainties or combinations of uncertainties on the calculated results. Each case illustrates different possibilities for how the repository might evolve and perform over time, taking into account uncertainties in the models and parameter values used to represent radionuclide release, retention and transport and, for biosphere assessment calculation cases, radiation exposure. The calculation cases each address a single, failed canister, where three possible modes of failure are considered: - The presence of an initial defect in the copper overpack of the canister that penetrates the overpack completely (subsequent corrosion of the insert may then lead to an enlargement of the defect). - Corrosion of the copper overpack, which occurs most rapidly in scenarios in which buffer density is reduced, e.g. by erosion. - Shear movements on fractures intersecting the deposition holes. However, the likelihood and consequences of more than one canister failure occurring during the assessment time fame are also considered, generally based on the findings from the single canister calculations. Quantitative

  7. Integration of a modeling task in water policy design - Example of a prospective scenarios approach on an agricultural catchment

    Science.gov (United States)

    Moreau, P.; Raimbault, T.; Durand, P.; Gascuel-Odoux, C.; Salmon-Monviola, J.; Masson, V.; Cordier, M. O.

    2010-05-01

    To meet the objectives of the Water Framework Directive in terms of nitrate pollution of surface water, numerous mitigation options have been proposed. To support stakeholders' decision prior to the implementation of regulations, scenario analysis by models can be used as a prospective approach. The work developed an extensive virtual experiment design from an initial basic requirement of catchment managers. Specific objectives were (1) to test the ability of a distributed model (TNT2) to simulate hydrology and hydrochemistry on a watershed with a high diversity of production systems, (2) to analyse a large set of scenarios and their effects on water quality and (3) to propose an effective mode of communication between research scientists and catchment managers. The focus of the scenario, in accord with catchment managers' requirement, is put on winter catch crop (CC). 5 conditions of implantation in rotations, 3 CC durations and 2 CC harvest modes were tested. CC is favoured by managers because of its simplicity to implement on fields and its relative low influence on farm strategy. Calibration and validation periods were run from 1998 to 2007 and scenario simulation period from 2007 to 2020. Results have been provided, for each scenario, by compartment (soil, atmosphere, plant uptake, water) but especially in the form of nitrogen mass balance at the catchment scale. The scenarios were ranked by integrating positive and negative effects of each measure. This 3-step-process: translation of a simple stakeholder question into extensive set of scenarios (complexification) - modeling process and data analysis - restitution to catchments' manager into a simple integrative form (simplification), gives an operational tool for decision support. In term of water quality, the best improvements in nitrate concentrations at the outlet reached a decrease of 0.8 mgL-1 compared to a "business as usual" scenario and were achieved by exporting the CC residue, by extending CC

  8. A methodology for analysing human errors of commission in accident scenarios for risk assessment

    International Nuclear Information System (INIS)

    Kim, J. H.; Jung, W. D.; Park, J. K

    2003-01-01

    As the concern on the impact of the operator's inappropriate interventions, so-called Errors Of Commissions(EOCs), on the plant safety has been raised, the interest in the identification and analysis of EOC events from the risk assessment perspective becomes increasing accordingly. To this purpose, we propose a new methodology for identifying and analysing human errors of commission that might be caused from the failures in situation assessment and decision making during accident progressions given an initiating event. The proposed methodology was applied to the accident scenarios of YGN 3 and 4 NPPs, which resulted in about 10 EOC situations that need careful attention

  9. Design and assessment of long-term sustainable transport system scenarios

    Energy Technology Data Exchange (ETDEWEB)

    Nijkamp, P.; Rienstra, S.A.; Vleugel, J.M. [Systems and Control Group, Faculty of Mechanical and Marine Engineering, Delft University of Technology, Delft (Netherlands)

    1995-03-01

    Current trends in transport indicate that the system is moving away from a sustainable development because of a sky-rocketing mobility growth and a modal shift towards the most polluting modes. These trends are reinforced by several underlying factors, which may be found in the spatial, institutional, economic and social/psychological fields. It may be concluded that major changes in technology, public policy as well as in the behaviour of individuals are necessary to make the transport system more compatible with environmental sustainability. This provokes the need for assessing a set of future images for transport in relation to the environment. In this paper expert scenarios are constructed on the basis of the recently developed `spider model`. Based on a set of distinct characteristics of a transport system, represented by eight axes in the above mentioned fields, an evaluation framework is constructed, which visualizes the main discussed driving forces. Scenarios can be constructed by connecting points on the successive axes, which may lead to entirely different transport systems. An expected and desired scenario are constructed next, by means of opinions of Dutch transport experts, which have been investigated by means of a nation-wide survey. The expected scenario indicates that many current trends will continue, while the transport system is largely the same as the current one. The desired scenario on the other hand, gives a more collective system, in which also many new modes are operating. The conclusion is that expected trends may not lead to a sustainable transport system, but that the desired road will be very hard to follow. 5 figs., 2 tabs., 27 refs.

  10. Assessment of doses due to radionuclides in sewage sludge for different scenario of its use

    International Nuclear Information System (INIS)

    Lydagiene, R.; Morkunas, G.; Pilkyte, L.

    2003-01-01

    Assessment of doses due to radionuclides in sewage sludge for different scenarios of its use was made for sewage plant storage in Visaginas, Rimses district, Karlu village. Calculations of individual and collective doses were made on the basis of results of measurements. Two potential exposure pathways from radionuclides in sewage sludge were considered and two scenarios descriptions were made. The first scenario is when the sludge is using for fertilization, and the second one - the sludge is covered with soil. Using program Environ-Calc made by American Chemical Society the number of samples needed to be sampled was optimized. 38 sewage samples were collected for gamma spectrometrical measurements and 10 samples - for measurements of tritium activity. Results of measurements pointed out that the sludge has no higher activity of tritium that background ones. The only two man made radionuclides 60 Co and 137 Cs were found by gamma spectrometry in the sludge. Average activity for the fresh weight in the samples of 60 Co was 42 Bq/kg, 137 Cs - 10 Bq/kg. Concentration of natural radionuclides was in the same range as in any soil samples from Lithuania. The dose for the first scenario for 1 years child will be 12 μSv, for adult - 9,4 μSv. In another scenario doses for the workers in sewage plant were estimated as 0,76 mSv. Collective dose in case of use of sewage sludge for fertilizers will be 4,4*10 -3 man Sv. The lowest doses will be when the sewage storage is covered using soil. (author)

  11. Scenario for a Short-Term Probabilistic Seismic Hazard Assessment (PSHA in Chiayi, Taiwan

    Directory of Open Access Journals (Sweden)

    Chung-Han Chan

    2013-01-01

    Full Text Available Using seismic activity and the Meishan earthquake sequence that occurred from 1904 to 1906, a scenario for short-term probabilistic seismic hazards in the Chiayi region of Taiwan is assessed. The long-term earthquake occurrence rate in Taiwan was evaluated using a smoothing kernel. The highest seismicity rate was calculated around the Chiayi region. To consider earthquake interactions, the rate-and-state friction model was introduced to estimate the seismicity rate evolution due to the Coulomb stress change. As imparted by the 1904 Touliu earthquake, stress changes near the 1906 Meishan and Yangshuigang epicenters was higher than the magnitude of tidal triggering. With regard to the impact of the Meishan earthquake, the region close to the Yangshuigang earthquake epicenter had a +0.75 bar stress increase. The results indicated significant interaction between the three damage events. Considering the path and site effect using ground motion prediction equations, a probabilistic seismic hazard in the form of a hazard evolution and a hazard map was assessed. A significant elevation in hazards following the three earthquakes in the sequence was determined. The results illustrate a possible scenario for seismic hazards in the Chiayi region which may take place repeatly in the future. Such scenario provides essential information on earthquake preparation, devastation estimations, emergency sheltering, utility restoration, and structure reconstruction.

  12. Quantitative assessment of safety barrier performance in the prevention of domino scenarios triggered by fire

    International Nuclear Information System (INIS)

    Landucci, Gabriele; Argenti, Francesca; Tugnoli, Alessandro; Cozzani, Valerio

    2015-01-01

    The evolution of domino scenarios triggered by fire critically depends on the presence and the performance of safety barriers that may have the potential to prevent escalation, delaying or avoiding the heat-up of secondary targets. The aim of the present study is the quantitative assessment of safety barrier performance in preventing the escalation of fired domino scenarios. A LOPA (layer of protection analysis) based methodology, aimed at the definition and quantification of safety barrier performance in the prevention of escalation was developed. Data on the more common types of safety barriers were obtained in order to characterize the effectiveness and probability of failure on demand of relevant safety barriers. The methodology was exemplified with a case study. The results obtained define a procedure for the estimation of safety barrier performance in the prevention of fire escalation in domino scenarios. - Highlights: • We developed a methodology for the quantitative assessment of safety barriers. • We focused on safety barriers aimed at preventing domino effect triggered by fire. • We obtained data on effectiveness and availability of the safety barriers. • The methodology was exemplified with a case study of industrial interest. • The results showed the role of safety barriers in preventing fired domino escalation

  13. Life cycle assessment of four municipal solid waste management scenarios in China.

    Science.gov (United States)

    Hong, Jinglan; Li, Xiangzhi; Zhaojie, Cui

    2010-11-01

    A life cycle assessment was carried out to estimate the environmental impact of municipal solid waste. Four scenarios mostly used in China were compared to assess the influence of various technologies on environment: (1) landfill, (2) incineration, (3) composting plus landfill, and (4) composting plus incineration. In all scenarios, the technologies significantly contribute to global warming and increase the adverse impact of non-carcinogens on the environment. The technologies played only a small role in the impact of carcinogens, respiratory inorganics, terrestrial ecotoxicity, and non-renewable energy. Similarly, the influence of the technologies on the way other elements affect the environment was ignorable. Specifically, the direct emissions from the operation processes involved played an important role in most scenarios except for incineration, while potential impact generated from transport, infrastructure and energy consumption were quite small. In addition, in the global warming category, highest potential impact was observed in landfill because of the direct methane gas emissions. Electricity recovery from methane gas was the key factor for reducing the potential impact of global warming. Therefore, increasing the use of methane gas to recover electricity is highly recommended to reduce the adverse impact of landfills on the environment. Copyright © 2010 Elsevier Ltd. All rights reserved.

  14. Life cycle assessment of four municipal solid waste management scenarios in China

    International Nuclear Information System (INIS)

    Hong Jinglan; Li Xiangzhi; Zhaojie Cui

    2010-01-01

    A life cycle assessment was carried out to estimate the environmental impact of municipal solid waste. Four scenarios mostly used in China were compared to assess the influence of various technologies on environment: (1) landfill, (2) incineration, (3) composting plus landfill, and (4) composting plus incineration. In all scenarios, the technologies significantly contribute to global warming and increase the adverse impact of non-carcinogens on the environment. The technologies played only a small role in the impact of carcinogens, respiratory inorganics, terrestrial ecotoxicity, and non-renewable energy. Similarly, the influence of the technologies on the way other elements affect the environment was ignorable. Specifically, the direct emissions from the operation processes involved played an important role in most scenarios except for incineration, while potential impact generated from transport, infrastructure and energy consumption were quite small. In addition, in the global warming category, highest potential impact was observed in landfill because of the direct methane gas emissions. Electricity recovery from methane gas was the key factor for reducing the potential impact of global warming. Therefore, increasing the use of methane gas to recover electricity is highly recommended to reduce the adverse impact of landfills on the environment.

  15. Scenario-based earthquake hazard and risk assessment for Baku (Azerbaijan

    Directory of Open Access Journals (Sweden)

    G. Babayev

    2010-12-01

    Full Text Available A rapid growth of population, intensive civil and industrial building, land and water instabilities (e.g. landslides, significant underground water level fluctuations, and the lack of public awareness regarding seismic hazard contribute to the increase of vulnerability of Baku (the capital city of the Republic of Azerbaijan to earthquakes. In this study, we assess an earthquake risk in the city determined as a convolution of seismic hazard (in terms of the surface peak ground acceleration, PGA, vulnerability (due to building construction fragility, population features, the gross domestic product per capita, and landslide's occurrence, and exposure of infrastructure and critical facilities. The earthquake risk assessment provides useful information to identify the factors influencing the risk. A deterministic seismic hazard for Baku is analysed for four earthquake scenarios: near, far, local, and extreme events. The seismic hazard models demonstrate the level of ground shaking in the city: PGA high values are predicted in the southern coastal and north-eastern parts of the city and in some parts of the downtown. The PGA attains its maximal values for the local and extreme earthquake scenarios. We show that the quality of buildings and the probability of their damage, the distribution of urban population, exposure, and the pattern of peak ground acceleration contribute to the seismic risk, meanwhile the vulnerability factors play a more prominent role for all earthquake scenarios. Our results can allow elaborating strategic countermeasure plans for the earthquake risk mitigation in the Baku city.

  16. The development of climatic scenarios for assessing impacts of climate change

    Energy Technology Data Exchange (ETDEWEB)

    Carter, T; Tuomenvirta, H [Finnish Meteorological Inst., Helsinki (Finland); Posch, M [National Inst. of Public Health and the Environment, Bilthoven (Netherlands)

    1996-12-31

    There is a growing recognition that mitigation measures for limiting future global changes in climate due to the enhanced greenhouse effect are unlikely to prevent some changes from occurring. Thus, if climate changes appear to be unavoidable, there is an increased need to evaluate their likely impacts on natural systems and human activities. Most impacts of climate change need to be examined at a regional scale, and their assessment requires up-to-date information on future regional climate changes. Unfortunately, accurate predictions of regional climate are not yet available. Instead, it is customary to construct climatic scenarios, which are plausible representations of future climate based on the best available information. This presentation outlines seven principles of climatic scenario development for impact studies, briefly describing some of the strengths and weaknesses of available methods and then illustrating one approach adopted in Finland

  17. Assessment actions and communication of solid cancer development risk in scenarios RDD based on computational simulation

    Energy Technology Data Exchange (ETDEWEB)

    Bulhosa, V.M.; Lima, Z.R. de, E-mail: valquiriambrj@gmail.com, E-mail: zelmolima@yahoo.com.br [Instituto de Engenharia Nuclear (PPGIEN/IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil); Andrade, E.R. de, E-mail: fisica.dna@gmail.com [Instituto Militar de Engenharia (IME), Rio de Janeiro, RJ (Brazil)

    2017-07-01

    The complex scenario involving the disposal of radioactive material into the environment can lead to population exposure and serious issues with its unfolding events. In this context, a methodology capable of providing useful basic information, with the least amount of scenario-specific-information, for immediate and future risk assessment is of relevance. For this work a simulation of a RDD involving cesium-137 will be considered, coupling the results of the Health Physics Code System for Evaluating Accidents Involving Radioactive Materials software (HOTSPOT 3.0.3) and the epidemiological equations of the Radiation Effects Research Foundation (RERF) to support the decision making process. The results of the simulation will be used to help quantify the number of general individuals allocated to areas of higher radiological risk and of interest to medical care by providing the scientific data to develop a more appropriate approach to risk and its communication to the affected population. (author)

  18. Assessment actions and communication of solid cancer development risk in scenarios RDD based on computational simulation

    International Nuclear Information System (INIS)

    Bulhosa, V.M.; Lima, Z.R. de; Andrade, E.R. de

    2017-01-01

    The complex scenario involving the disposal of radioactive material into the environment can lead to population exposure and serious issues with its unfolding events. In this context, a methodology capable of providing useful basic information, with the least amount of scenario-specific-information, for immediate and future risk assessment is of relevance. For this work a simulation of a RDD involving cesium-137 will be considered, coupling the results of the Health Physics Code System for Evaluating Accidents Involving Radioactive Materials software (HOTSPOT 3.0.3) and the epidemiological equations of the Radiation Effects Research Foundation (RERF) to support the decision making process. The results of the simulation will be used to help quantify the number of general individuals allocated to areas of higher radiological risk and of interest to medical care by providing the scientific data to develop a more appropriate approach to risk and its communication to the affected population. (author)

  19. Assessment of Meteorological Drought Indices in Korea Using RCP 8.5 Scenario

    Directory of Open Access Journals (Sweden)

    Dongwoo Jang

    2018-03-01

    Full Text Available Diverse drought indices have been developed and used across the globe to assess and monitor droughts. Among them, the Standardized Precipitation Index (SPI and Reconnaissance Drought Index (RDI are drought indices that have been recently developed and are being used in the world’s leading countries. This study took place in Korea’s major observatories for drought prediction until 2100, using the Representative Concentration Pathway (RCP 8.5 scenario. On the basis of the drought index measured by SPI, future climates were forecast to be humid, as the index would rise over time. In contrast, the RDI, which takes evapotranspiration into account, anticipated dry climates, with the drought index gradually falling over time. From the analysis of the drought index through the RCP 8.5 scenario, extreme drought intensity will be more likely to occur due to rising temperatures. To obtain the diversity of drought prediction, the evapotranspiration was deemed necessary for calculating meteorological droughts.

  20. Future scenario development within life cycle assessment of waste management systems

    DEFF Research Database (Denmark)

    Bisinella, Valentina

    Life Cycle Assessment (LCA) is an acknowledged tool for quantifying the sustainability of waste management solutions. However, the use of LCA for decision-making is hindered by the strong dependency of the LCA results on the assumptions regarding the future conditions in which the waste management...... solutions will operate. Future scenario methods from the management engineering field may provide valid approaches for formulating consistent assumptions on future conditions for the waste management system modelled with LCA. However, the standardized LCA procedure currently does not offer much guidance...... field. The quantitative modelling implications were tested within real-scale LCA models focusing on the management of residual waste in Denmark. In a wide range of scenarios, this thesis addressed the influence on the LCA model results of realistic technology and waste composition uncertainties, as well...

  1. Assessment actions and communication of solid cancer development risk in scenarios RDD based on computational simulation

    International Nuclear Information System (INIS)

    Bulhosa, Valquiria Miranda; Lima, Zelmo R. de; Andrade, Edson Ramos de

    2017-01-01

    The complex scenario involving the disposal of radioactive material into the environment can lead to population exposure and serious issues with its unfolding events. In this context, a methodology capable of providing useful basic information, with the least amount of scenario-specific-information, for immediate and future risk assessment is of relevance. For this work a simulation of a Radiological Dispersal Devices involving cesium 137 will be considered, coupling the results of the Health Physics Code System for Evaluating Accidents Involving Radioactive Materials software (HotSpot 3.0.3) and the epidemiological equations of the Radiation Effects Research Foundation (RERF) to support the decision making process. The results of the simulation will be used to help quantify the number of general individuals allocated to areas of higher radiological risk and of interest to medical care by providing the scientific data to develop a more appropriate approach to risk and its communication to the affected population. (author)

  2. Assessment actions and communication of solid cancer development risk in scenarios RDD based on computational simulation

    Energy Technology Data Exchange (ETDEWEB)

    Bulhosa, Valquiria Miranda; Lima, Zelmo R. de, E-mail: valquiriambrj@gmail.com, E-mail: zelmolima@yahoo.com.br [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil); Andrade, Edson Ramos de, E-mail: fisica.dna@gmail.com [Instituto Militar de Engenharia (IME), Rio de Janeiro, RJ (Brazil)

    2017-07-01

    The complex scenario involving the disposal of radioactive material into the environment can lead to population exposure and serious issues with its unfolding events. In this context, a methodology capable of providing useful basic information, with the least amount of scenario-specific-information, for immediate and future risk assessment is of relevance. For this work a simulation of a Radiological Dispersal Devices involving cesium 137 will be considered, coupling the results of the Health Physics Code System for Evaluating Accidents Involving Radioactive Materials software (HotSpot 3.0.3) and the epidemiological equations of the Radiation Effects Research Foundation (RERF) to support the decision making process. The results of the simulation will be used to help quantify the number of general individuals allocated to areas of higher radiological risk and of interest to medical care by providing the scientific data to develop a more appropriate approach to risk and its communication to the affected population. (author)

  3. The development of climatic scenarios for assessing impacts of climate change

    International Nuclear Information System (INIS)

    Carter, T.; Tuomenvirta, H.; Posch, M.

    1995-01-01

    There is a growing recognition that mitigation measures for limiting future global changes in climate due to the enhanced greenhouse effect are unlikely to prevent some changes from occurring. Thus, if climate changes appear to be unavoidable, there is an increased need to evaluate their likely impacts on natural systems and human activities. Most impacts of climate change need to be examined at a regional scale, and their assessment requires up-to-date information on future regional climate changes. Unfortunately, accurate predictions of regional climate are not yet available. Instead, it is customary to construct climatic scenarios, which are plausible representations of future climate based on the best available information. This presentation outlines seven principles of climatic scenario development for impact studies, briefly describing some of the strengths and weaknesses of available methods and then illustrating one approach adopted in Finland

  4. The development of climatic scenarios for assessing impacts of climate change

    Energy Technology Data Exchange (ETDEWEB)

    Carter, T.; Tuomenvirta, H. [Finnish Meteorological Inst., Helsinki (Finland); Posch, M. [National Inst. of Public Health and the Environment, Bilthoven (Netherlands)

    1995-12-31

    There is a growing recognition that mitigation measures for limiting future global changes in climate due to the enhanced greenhouse effect are unlikely to prevent some changes from occurring. Thus, if climate changes appear to be unavoidable, there is an increased need to evaluate their likely impacts on natural systems and human activities. Most impacts of climate change need to be examined at a regional scale, and their assessment requires up-to-date information on future regional climate changes. Unfortunately, accurate predictions of regional climate are not yet available. Instead, it is customary to construct climatic scenarios, which are plausible representations of future climate based on the best available information. This presentation outlines seven principles of climatic scenario development for impact studies, briefly describing some of the strengths and weaknesses of available methods and then illustrating one approach adopted in Finland

  5. Assessing hydrologic impacts of future Land Change scenarios in the San Pedro River (U.S./Mexico)

    Science.gov (United States)

    Kepner, W. G.; Burns, S.; Sidman, G.; Levick, L.; Goodrich, D. C.; Guertin, P.; Yee, W.; Scianni, M.

    2012-12-01

    An approach was developed to characterize the hydrologic impacts of urban expansion through time for the San Pedro River, a watershed of immense international importance that straddles the U.S./Mexico border. Future urban growth is a key driving force altering local and regional hydrology and is represented by decadal changes in housing density maps from 2010 to 2100 derived from the Integrated Climate and Land-Use Scenarios (ICLUS) database. ICLUS developed future housing density maps by adapting the Intergovernmental Panel on Climate Change (IPCC) Special Report on Emissions Scenarios (SRES) social, economic, and demographic storylines to the conterminous United States. To characterize the hydrologic impacts of future growth, the housing density maps were reclassified to National Land Cover Database 2006 land cover classes and used to parameterize the Soil and Water Assessment Tool (SWAT) using the Automated Geospatial Watershed Assessment (AGWA) tool. The presentation will report 1) the methodology for adapting the ICLUS data for use in AGWA as an approach to evaluate basin-wide impacts of development on water-quantity and -quality, 2) initial results of the application of the methodology, and 3) discuss implications of the analysis.

  6. Integrated climate change risk assessment:

    DEFF Research Database (Denmark)

    Kaspersen, Per Skougaard; Halsnæs, Kirsten

    2017-01-01

    Risk assessments of flooding in urban areas during extreme precipitation for use in, for example, decision-making regarding climate adaptation, are surrounded by great uncertainties stemming from climate model projections, methods of downscaling and the assumptions of socioeconomic impact models...... to address the complex linkages between the different kinds of data required in assessing climate adaptation. It emphasizes that the availability of spatially explicit data can reduce the overall uncertainty of the risk assessment and assist in identifying key vulnerable assets. The usefulness...... of such a framework is demonstrated by means of a risk assessment of flooding from extreme precipitation for the city of Odense, Denmark. A sensitivity analysis shows how the presence of particularly important assets, such as cultural and historical heritage, may be addressed in assessing such risks. The output...

  7. Life cycle assessment and residue leaching: The importance of parameter, scenario and leaching data selection

    Energy Technology Data Exchange (ETDEWEB)

    Allegrini, E., E-mail: elia@env.dtu.dk [Technical University of Denmark, Department of Environmental Engineering, Building 115, 2800 Lyngby (Denmark); Butera, S. [Technical University of Denmark, Department of Environmental Engineering, Building 115, 2800 Lyngby (Denmark); Kosson, D.S. [Vanderbilt University, Department of Civil and Environmental Engineering, Box 1831 Station B, Nashville, TN 37235 (United States); Van Zomeren, A. [Energy Research Centre of the Netherlands (ECN), Department of Environmental Risk Assessment, P.O. Box 1, 1755 ZG Petten (Netherlands); Van der Sloot, H.A. [Hans van der Sloot Consultancy, Dorpsstraat 216, 1721 BV Langedijk (Netherlands); Astrup, T.F. [Technical University of Denmark, Department of Environmental Engineering, Building 115, 2800 Lyngby (Denmark)

    2015-04-15

    Highlights: • Relevance of metal leaching in waste management system LCAs was assessed. • Toxic impacts from leaching could not be disregarded. • Uncertainty of toxicity, due to background activities, determines LCA outcomes. • Parameters such as pH and L/S affect LCA results. • Data modelling consistency and coverage within an LCA are crucial. - Abstract: Residues from industrial processes and waste management systems (WMSs) have been increasingly reutilised, leading to landfilling rate reductions and the optimisation of mineral resource utilisation in society. Life cycle assessment (LCA) is a holistic methodology allowing for the analysis of systems and products and can be applied to waste management systems to identify environmental benefits and critical aspects thereof. From an LCA perspective, residue utilisation provides benefits such as avoiding the production and depletion of primary materials, but it can lead to environmental burdens, due to the potential leaching of toxic substances. In waste LCA studies where residue utilisation is included, leaching has generally been neglected. In this study, municipal solid waste incineration bottom ash (MSWI BA) was used as a case study into three LCA scenarios having different system boundaries. The importance of data quality and parameter selection in the overall LCA results was evaluated, and an innovative method to assess metal transport into the environment was applied, in order to determine emissions to the soil and water compartments for use in an LCA. It was found that toxic impacts as a result of leaching were dominant in systems including only MSWI BA utilisation, while leaching appeared negligible in larger scenarios including the entire waste system. However, leaching could not be disregarded a priori, due to large uncertainties characterising other activities in the scenario (e.g. electricity production). Based on the analysis of relevant parameters relative to leaching, and on general results

  8. Assessing the Formation of Experience-Based Gender Expectations in an Implicit Learning Scenario

    Directory of Open Access Journals (Sweden)

    Anton Öttl

    2017-09-01

    Full Text Available The present study investigates the formation of new word-referent associations in an implicit learning scenario, using a gender-coded artificial language with spoken words and visual referents. Previous research has shown that when participants are explicitly instructed about the gender-coding system underlying an artificial lexicon, they monitor the frequency of exposure to male vs. female referents within this lexicon, and subsequently use this probabilistic information to predict the gender of an upcoming referent. In an explicit learning scenario, the auditory and visual gender cues are necessarily highlighted prior to acqusition, and the effects previously observed may therefore depend on participants' overt awareness of these cues. To assess whether the formation of experience-based expectations is dependent on explicit awareness of the underlying coding system, we present data from an experiment in which gender-coding was acquired implicitly, thereby reducing the likelihood that visual and auditory gender cues are used strategically during acquisition. Results show that even if the gender coding system was not perfectly mastered (as reflected in the number of gender coding errors, participants develop frequency based expectations comparable to those previously observed in an explicit learning scenario. In line with previous findings, participants are quicker at recognizing a referent whose gender is consistent with an induced expectation than one whose gender is inconsistent with an induced expectation. At the same time however, eyetracking data suggest that these expectations may surface earlier in an implicit learning scenario. These findings suggest that experience-based expectations are robust against manner of acquisition, and contribute to understanding why similar expectations observed in the activation of stereotypes during the processing of natural language stimuli are difficult or impossible to suppress.

  9. Philosophy of integrity assessment of engineering components

    International Nuclear Information System (INIS)

    Chaudhuri, Satyabrata

    2008-01-01

    Integrity assessment of engineering components in power plants and process industries has attracted global attention from the viewpoint of safety and economy for their optimum utilization. This paper describes some aspects of philosophy of component integrity such as life assessment technology, materials used and the factors limiting the serviceability of the components operating at high temperatures and pressures. Numerous investigations have been carried out all over the world to study changes in microstructure and material property due to prolonged service of the components to decide their further serviceability. This paper includes case studies on integrity assessment of service-exposed components carried out in our laboratory as well

  10. Radioactive waste assessment using 'moderate growth in nuclear electricity generation' scenario

    International Nuclear Information System (INIS)

    Richardson, J.A.; Goodill, D.R.; Tymons, B.J.

    1985-05-01

    This report describes an assessment of radioactive waste management arisings from a defined nuclear power generation scenario -Scheme 3. Scheme 3 assumes a moderate growth in nuclear generation scenario with raw waste arisings from 3 main groups: (i) existing and committed commercial reactors; (ii) fuel reprocessing plants; (iii) research, industry and medicine. No decommissioning wastes are considered except for arisings from the final fuel cores from decommissioned reactors. The study uses the SIMULATION2 code which models waste material flows through the system. With a knowledge of the accumulations and average production rates of the raw wastes and their isotopic compositions (or total activities), the rates at which conditioned wastes become available for transportation and disposal are calculated, with specific activity levels. The data bases for the inventory calculations and the assumptions concerning future operation of nuclear facilities were those current in 1983. Both the inventory data and plans for the future of existing nuclear installations have been updated since these calculations were completed. Therefore the results from this assessment do not represent the most up-to-date information available. The report does, however, illustrate the methodology of assessment, and indicates the type of information that can be generated. (author)

  11. Validity Evidence for a Serious Game to Assess Performance on Critical Pediatric Emergency Medicine Scenarios.

    Science.gov (United States)

    Gerard, James M; Scalzo, Anthony J; Borgman, Matthew A; Watson, Christopher M; Byrnes, Chelsie E; Chang, Todd P; Auerbach, Marc; Kessler, David O; Feldman, Brian L; Payne, Brian S; Nibras, Sohail; Chokshi, Riti K; Lopreiato, Joseph O

    2018-01-26

    We developed a first-person serious game, PediatricSim, to teach and assess performances on seven critical pediatric scenarios (anaphylaxis, bronchiolitis, diabetic ketoacidosis, respiratory failure, seizure, septic shock, and supraventricular tachycardia). In the game, players are placed in the role of a code leader and direct patient management by selecting from various assessment and treatment options. The objective of this study was to obtain supportive validity evidence for the PediatricSim game scores. Game content was developed by 11 subject matter experts and followed the American Heart Association's 2011 Pediatric Advanced Life Support Provider Manual and other authoritative references. Sixty subjects with three different levels of experience were enrolled to play the game. Before game play, subjects completed a 40-item written pretest of knowledge. Game scores were compared between subject groups using scoring rubrics developed for the scenarios. Validity evidence was established and interpreted according to Messick's framework. Content validity was supported by a game development process that involved expert experience, focused literature review, and pilot testing. Subjects rated the game favorably for engagement, realism, and educational value. Interrater agreement on game scoring was excellent (intraclass correlation coefficient = 0.91, 95% confidence interval = 0.89-0.9). Game scores were higher for attendings followed by residents then medical students (Pc game and written test scores (r = 0.84, P game scores to assess knowledge of pediatric emergency medicine resuscitation.

  12. Scenario-neutral Food Security Risk Assessment: A livestock Heat Stress Case Study

    Science.gov (United States)

    Broman, D.; Rajagopalan, B.; Hopson, T. M.

    2015-12-01

    Food security risk assessments can provide decision-makers with actionable information to identify critical system limitations, and alternatives to mitigate the impacts of future conditions. The majority of current risk assessments have been scenario-led and results are limited by the scenarios - selected future states of the world's climate system and socioeconomic factors. A generic scenario-neutral framework for food security risk assessments is presented here that uses plausible states of the world without initially assigning likelihoods. Measures of system vulnerabilities are identified and system risk is assessed for these states. This framework has benefited greatly by research in the water and natural resource fields to adapt their planning to provide better risk assessments. To illustrate the utility of this framework we develop a case study using livestock heat stress risk within the pastoral system of West Africa. Heat stress can have a major impact not only on livestock owners, but on the greater food production system, decreasing livestock growth, milk production, and reproduction, and in severe cases, death. A heat stress index calculated from daily weather is used as a vulnerability measure and is computed from historic daily weather data at several locations in the study region. To generate plausible states, a stochastic weather generator is developed to generate synthetic weather sequences at each location, consistent with the seasonal climate. A spatial model of monthly and seasonal heat stress provide projections of current and future livestock heat stress measures across the study region, and can incorporate in seasonal climate and other external covariates. These models, when linked with empirical thresholds of heat stress risk for specific breeds offer decision-makers with actionable information for use in near-term warning systems as well as for future planning. Future assessment can indicate under which states livestock are at greatest risk

  13. An Integrated Modelling System to Predict Hydrological Processes under Climate and Land-Use/Cover Change Scenarios

    Directory of Open Access Journals (Sweden)

    Babak Farjad

    2017-10-01

    Full Text Available This study proposes an integrated modeling system consisting of the physically-based MIKE SHE/MIKE 11 model, a cellular automata model, and general circulation models (GCMs scenarios to investigate the independent and combined effects of future climate and land-use/land-cover (LULC changes on the hydrology of a river system. The integrated modelling system is applied to the Elbow River watershed in southern Alberta, Canada in conjunction with extreme GCM scenarios and two LULC change scenarios in the 2020s and 2050s. Results reveal that LULC change substantially modifies the river flow regime in the east sub-catchment, where rapid urbanization is occurring. It is also shown that the change in LULC causes an increase in peak flows in both the 2020s and 2050s. The impacts of climate and LULC change on streamflow are positively correlated in winter and spring, which intensifies their influence and leads to a significant rise in streamflow, and, subsequently, increases the vulnerability of the watershed to spring floods. This study highlights the importance of using an integrated modeling approach to investigate both the independent and combined impacts of climate and LULC changes on the future of hydrology to improve our understanding of how watersheds will respond to climate and LULC changes.

  14. The role of the uncertainty in assessing future scenarios of water shortage in alluvial aquifers

    Science.gov (United States)

    Romano, Emanuele; Camici, Stefania; Brocca, Luca; Moramarco, Tommaso; Guyennon, Nicolas; Preziosi, Elisabetta

    2015-04-01

    There are many evidences that the combined effects of variations in precipitation and temperature due to climate change can result in a significant change of the recharge to groundwater at different time scales. A possible reduction of effective infiltration can result in a significant decrease, temporary or permanent, of the availability of the resource and, consequently, the sustainable pumping rate should be reassessed. In addition to this, one should also consider the so called indirect impacts of climate change, resulting from human intervention (e.g. augmentation of abstractions) which are feared to be even more important than the direct ones in the medium term: thus, a possible increase of episodes of shortage (i.e. the inability of the groundwater system to completely supply the water demand) can result both from change in the climate forcing and change in the demand. In order to assess future scenarios of water shortage a modelling chain is often used. It includes: 1) the use of General Circulation Models to estimate changes in temperature and precipitation; 2) downscaling procedures to match modeling scenarios to the observed meteorological time series; 3) soil-atmosphere modelling to estimate the time variation of the recharge to the aquifer; 4) groundwater flow models to simulate the water budget and piezometric head evolution; 5) future scenarios of groundwater quantitative status that include scenarios of demand variation. It is well known that each of these processing steps is affected by an intrinsic uncertainty that propagates through the whole chain leading to a final uncertainty on the piezometric head scenarios. The estimate of such an uncertainty is a key point for a correct management of groundwater resources, in case of water shortage due to prolonged droughts as well as for planning purposes. This study analyzes the uncertainty of the processing chain from GCM scenarios to its impact on an alluvial aquifer in terms of exploitation

  15. Multiple methods for multiple futures: Integrating qualitative scenario planning and quantitative simulation modeling for natural resource decision making

    Science.gov (United States)

    Symstad, Amy J.; Fisichelli, Nicholas A.; Miller, Brian W.; Rowland, Erika; Schuurman, Gregor W.

    2017-01-01

    Scenario planning helps managers incorporate climate change into their natural resource decision making through a structured “what-if” process of identifying key uncertainties and potential impacts and responses. Although qualitative scenarios, in which ecosystem responses to climate change are derived via expert opinion, often suffice for managers to begin addressing climate change in their planning, this approach may face limits in resolving the responses of complex systems to altered climate conditions. In addition, this approach may fall short of the scientific credibility managers often require to take actions that differ from current practice. Quantitative simulation modeling of ecosystem response to climate conditions and management actions can provide this credibility, but its utility is limited unless the modeling addresses the most impactful and management-relevant uncertainties and incorporates realistic management actions. We use a case study to compare and contrast management implications derived from qualitative scenario narratives and from scenarios supported by quantitative simulations. We then describe an analytical framework that refines the case study’s integrated approach in order to improve applicability of results to management decisions. The case study illustrates the value of an integrated approach for identifying counterintuitive system dynamics, refining understanding of complex relationships, clarifying the magnitude and timing of changes, identifying and checking the validity of assumptions about resource responses to climate, and refining management directions. Our proposed analytical framework retains qualitative scenario planning as a core element because its participatory approach builds understanding for both managers and scientists, lays the groundwork to focus quantitative simulations on key system dynamics, and clarifies the challenges that subsequent decision making must address.

  16. Life cycle assessment and residue leaching: the importance of parameter, scenario and leaching data selection.

    Science.gov (United States)

    Allegrini, E; Butera, S; Kosson, D S; Van Zomeren, A; Van der Sloot, H A; Astrup, T F

    2015-04-01

    Residues from industrial processes and waste management systems (WMSs) have been increasingly reutilised, leading to landfilling rate reductions and the optimisation of mineral resource utilisation in society. Life cycle assessment (LCA) is a holistic methodology allowing for the analysis of systems and products and can be applied to waste management systems to identify environmental benefits and critical aspects thereof. From an LCA perspective, residue utilisation provides benefits such as avoiding the production and depletion of primary materials, but it can lead to environmental burdens, due to the potential leaching of toxic substances. In waste LCA studies where residue utilisation is included, leaching has generally been neglected. In this study, municipal solid waste incineration bottom ash (MSWI BA) was used as a case study into three LCA scenarios having different system boundaries. The importance of data quality and parameter selection in the overall LCA results was evaluated, and an innovative method to assess metal transport into the environment was applied, in order to determine emissions to the soil and water compartments for use in an LCA. It was found that toxic impacts as a result of leaching were dominant in systems including only MSWI BA utilisation, while leaching appeared negligible in larger scenarios including the entire waste system. However, leaching could not be disregarded a priori, due to large uncertainties characterising other activities in the scenario (e.g. electricity production). Based on the analysis of relevant parameters relative to leaching, and on general results of the study, recommendations are provided regarding the use of leaching data in LCA studies. Copyright © 2014 Elsevier Ltd. All rights reserved.

  17. Life cycle assessment of municipal solid waste management scenarios on the small island of Mauritius.

    Science.gov (United States)

    Rajcoomar, Avinash; Ramjeawon, Toolseeram

    2017-03-01

    The aim of this study was to use the life cycle assessment tool to assess, from an environmental point of view, the different possible municipal solid waste (MSW) management scenarios for the island of Mauritius. The scenarios include landfilling with energy recovery (S1), incineration with energy recovery (S2), composting, incineration and landfilling (S3) and finally composting, recycling, incineration and landfilling (S4). The MSW generated in 2010 was selected as the functional unit. Foreground data were collected through surveys and literature. Background data were obtained from ecoinvent data in SimaPro 8 libraries. The scenarios were compared both through the CML-IA baseline-midpoint method and the ReCiPe end-point method. From the midpoint method, the results obtained indicates that landfilling (S1) has the greatest impact in all the analyzed impact categories except ozone layer depletion and human toxicity, while incineration (S2) has the least impact on almost all the analyzed damage categories except in global warming potential and human toxicity. The collection and transportation of waste has a significant impact on the environment. From the end-point method, S4 reduces the damage impact categories on Human Health, Ecosystems and Resources due to the recycling process. S3 is not favorable due to the impact caused by the composting process. However, it is also very important to emphasize that for incineration, the best available technology with energy recovery shall be considered. It is recommended that S2 and S4 are considered for strategic planning.

  18. Shipping and shipbuilding scenario evaluations through integration of maritime and macroeconomic models

    NARCIS (Netherlands)

    Pruyn, J.F.J.

    2013-01-01

    This research focusses on the use of consistent scenarios to help ship owners, banks and other parties with an interest the maritime business get a better grip on the future. Three levels of detail can be distinguished for the maritime industry. The macroeconomic level is the highest and focusses on

  19. Landscape ecological assessment: a tool for integrating biodiversity issues in strategic environmental assessment and planning.

    Science.gov (United States)

    Mörtberg, U M; Balfors, B; Knol, W C

    2007-03-01

    To achieve a sustainable development, impacts on biodiversity of urbanisation, new infrastructure projects and other land use changes must be considered on landscape and regional scales. This requires that important decisions are made after a systematic evaluation of environmental impacts. Landscape ecology can provide a conceptual framework for the assessment of consequences of long-term development processes like urbanisation on biodiversity components, and for evaluating and visualising the impacts of alternative planning scenarios. The aim of this paper was to develop methods for integrating biodiversity issues in planning and strategic environmental assessment in an urbanising environment, on landscape and regional levels. In order to test developed methods, a case study was conducted in the region of Stockholm, the capital of Sweden, and the study area embraced the city centre, suburbs and peri-urban areas. Focal species were tested as indicators of habitat quality, quantity and connectivity in the landscape. Predictive modelling of habitat distribution in geographic information systems involved the modelling of focal species occurrences based on empirical data, incorporated in a landscape ecological decision support system. When habitat models were retrieved, they were applied on future planning scenarios in order to predict and assess the impacts on focal species. The scenario involving a diffuse exploitation pattern had the greatest negative impacts on the habitat networks of focal species. The scenarios with concentrated exploitation also had negative impacts, although they were possible to mitigate quite easily. The predictions of the impacts on habitats networks of focal species made it possible to quantify, integrate and visualise the effects of urbanisation scenarios on aspects of biodiversity on a landscape level.

  20. Techno-economic viability assessments of greener propulsion technology under potential environmental regulatory policy scenarios

    International Nuclear Information System (INIS)

    Nalianda, D.K.; Kyprianidis, K.G.; Sethi, V.; Singh, R.

    2015-01-01

    Highlights: • An advanced method is presented for techno-economic assessment under potential environmental regulatory policy scenarios. • The viability of the contra-rotating open rotor concept is investigated under various environmental policies. • CO_2 taxation is needed to drive the aerospace industry towards greener solutions. - Abstract: Sustainability of the aviation industry, as any other industry, depends on the elasticity of demand for the product and profitability through minimising operating costs. Of paramount importance is assessing and understanding the interdependency and effects of environmentally optimised solutions and emission mitigation policies. This paper describes the development and application of assessment methodologies to better understand the effects of environmental taxation/energy policies aimed at environmental pollution reduction and the future potential economic impact they may have on the adaptation of “greener” novel technologies. These studies are undertaken using a Techno-economic Environmental Risk Assessment approach. The methodology demonstrated allows the assessment of the economic viability of new technologies compared to conventional technologies, for various CO_2 emission taxation and fuel price scenarios. It considers relative increases in acquisition price and maintenance costs. A study undertaken as a ‘proof of concept’ compares a Counter Rotating Open Rotor aircraft with a conventional aircraft for short range operations. It indicates that at current fuel price and with no carbon taxation, a highly fuel efficient technology, such as the one considered, could be rendered economically unviable. The work goes on to demonstrate that in comparison to the conventional aircraft, any economic benefits that may be accrued from improvement in fuel consumption through such a technology, may well be negated through increases in acquisition price and maintenance costs. The work further demonstrates that if policy

  1. Preliminary assessment of the health and environmental effects of coal utilization in the midwest. Volume I. Energy scenarios, technology characterizations, air and water resource impacts, and health effects

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-01-01

    An initial evaluation of the major health and environmental issues associated with increased coal use in the six midwestern states of Illinois, Indiana, Michigan, Minnesota, Ohio, and Wisconsin is presented. Using an integrated assessment approach, the evaluation proceeds from a base-line scenario of energy demand and facility siting for the period 1975 to 2020. Emphasis is placed on impacts from coal extraction, land reclamation, coal combustion for electrical generation, and coal gasification. The range of potential impacts and constraints is illustrated by a second scenario that represents an expected upper limit for coal utilization in Illinois. Included are: (1) a characterization of the energy demand and siting scenarios, coal related technologies, and coal resources, and (2) the related impacts on air quality, water availability, water quality, and human health.

  2. Using a Numerical Model to Assess the Geomorphic Impacts of Forest Management Scenarios on Streams

    Science.gov (United States)

    Davidson, S. L.; Eaton, B. C.

    2014-12-01

    In-stream large wood governs the morphology of many small to intermediate streams, while riparian vegetation influences bank strength and channel pattern. Forest management practices such as harvesting and fire suppression therefore dramatically influence channel processes and associated aquatic habitat. The primary objective of this research is to compare the impacts of three common forest scenarios - natural fire disturbance, forest harvesting with a riparian buffer, and fire suppression - on the volume of in-channel wood and the complexity of aquatic habitat in channels at a range of scales. Each scenario is explored through Monte Carlo simulations run over a period of 1000 years using a numerical reach scale channel simulator (RSCS), with variations in tree toppling rate and forest density used to represent each forest management trajectory. The habitat complexity associated with each scenario is assessed based on the area of the bed occupied by pools and spawning sized sediment, the availability of wood cover, and the probability of avulsion. Within the fire scenario, we also use the model to separately investigate the effects of root decay and recovery on equilibrium channel geometry by varying the rooting depth and associated bank strength through time. The results show that wood loading and habitat complexity are influenced by the timing and magnitude of wood recruitment, as well as channel scale. The forest harvesting scenario produces the lowest wood loads and habitat complexity so long as the buffer width is less than the average mature tree height. The natural fire cycle produces the greatest wood loading and habitat complexity, but also the greatest variability because these streams experience significant periods without wood recruitment as forests regenerate. In reaches that experience recurrent fires, width increases in the post-fire period as roots decay, at times producing a change in channel pattern when a threshold width to depth ratio is

  3. Stimulating Learning with Integrated Assessments in Construction Education

    Directory of Open Access Journals (Sweden)

    Imriyas Kamardeen

    2014-09-01

    Full Text Available Quality of learning students experience is heavily dependent on the effectiveness of course design. Assessments are a key component in course design and students determine their level of involvement in a learning activity based on whether it is assessed or not. Assessments are therefore a powerful tool that lecturers can utilise to drive learning. However, designing effective assessments to stimulate learning is challenging in the presence of disciplinary, contextual dimensions. A case study approach is adopted to demonstrate how effective integrated assessment schemes may be developed and implemented for construction education. The scheme in the case study amalgamated case-based learning, online quizzes and adaptive eTests to provide a variety of assessments, aligned with lecture topics and contemporary real-word scenarios. It was found that the presence of both formative and summative tasks in the assessment scheme complemented each other, kept students constantly motivated and engaged in learning, and resulted in a good learning experience for them. The study provide evidence, and valuable insights and tips for lecturers in similar degree programs as to how they could modify pedagogical styles in their courses for better learning experiences for students and improved teaching ratings for themselves. Keywords: Pedagogy, Integrated assessment, Case-based learning, Online quiz, Adaptive eLearning

  4. Stimulating Learning with Integrated Assessments in Construction Education

    Directory of Open Access Journals (Sweden)

    Imriyas Kamardeen

    2014-09-01

    Full Text Available Quality of learning students experience is heavily dependent on the effectiveness of course design. Assessments are a key component in course design and students determine their level of involvement in a learning activity based on whether it is assessed or not. Assessments are therefore a powerful tool that lecturers can utilise to drive learning. However, designing effective assessments to stimulate learning is challenging in the presence of disciplinary, contextual dimensions. A case study approach is adopted to demonstrate how effective integrated assessment schemes may be developed and implemented for construction education. The scheme in the case study amalgamated case-based learning, online quizzes and adaptive eTests to provide a variety of assessments, aligned with lecture topics and contemporary real-word scenarios. It was found that the presence of both formative and summative tasks in the assessment scheme complemented each other, kept students constantly motivated and engaged in learning, and resulted in a good learning experience for them. The study provide evidence, and valuable insights and tips for lecturers in similar degree programs as to how they could modify pedagogical styles in their courses for better learning experiences for students and improved teaching ratings for themselves.   Keywords: Pedagogy, Integrated assessment, Case-based learning, Online quiz, Adaptive eLearning

  5. Assessment of climate change scenarios for Saudi Arabia using data from global climate models

    International Nuclear Information System (INIS)

    Husain, T.; Chowdhury, S.

    2009-01-01

    This study assesses available scientific information and data to predict changes in the climatic parameters in Saudi Arabia for understanding the impacts for mitigation and/or adaptation. Meteorological data from 26 synoptic stations were analyzed in this study. Various climatic change scenarios were reviewed and A 2 and B 2 climatic scenario families were selected. In order to assess long-term global impact, global climatic models were used to simulate changes in temperature, precipitation, relative humidity, solar radiation, and wind circulation. Using global climate model (GCM), monthly time series data was retrieved for Longitude 15 o N to 35 o N and 32.5 o E to 60 o E covering the Kingdom of Saudi Arabia from 1970 to 2100 for all grids. Taking averages of 1970 to 2003 as baseline, change in temperature, relative humidity and precipitation were estimated for the base period. A comparative evaluation was performed for predictive capabilities of these models for temperature, precipitation and relative humidity. Available meteorological data from 1970 to 2003 was used to determine trends. This paper discusses the inconsistency in these parameters for decision-making and recommends future studies by linking global climate models with a suitable regional climate modeling tool. (author)

  6. Conceptualizing sustainable development. An assessment methodology connecting values, knowledge, worldviews and scenarios

    International Nuclear Information System (INIS)

    De Vries, Bert J.M.; Petersen, Arthur C.

    2009-01-01

    Sustainability science poses severe challenges to classical disciplinary science. To bring the perspectives of diverse disciplines together in a meaningful way, we describe a novel methodology for sustainability assessment of a particular social-ecological system, or country. Starting point is that a sustainability assessment should investigate the ability to continue and develop a desirable way of living vis-a-vis later generations and life elsewhere on the planet. Evidently, people hold different values and beliefs about the way societies sustain quality of life for their members. The first step, therefore, is to analyze people's value orientations and the way in which they interpret sustainability problems i.e. their beliefs. The next step is to translate the resulting worldviews into model-based narratives, i.e. scenarios. The qualitative and quantitative outcomes are then investigated in terms of associated risks and opportunities and robustness of policy options. The Netherlands Environmental Assessment Agency (PBL) has followed this methodology, using extensive surveys among the Dutch population. In its First Sustainability Outlook (2004), the resulting archetypical worldviews became the basis for four different scenarios for policy analysis, with emphases on the domains of transport, energy and food. The goal of the agency's Sustainability Outlooks is to show that choices are inevitable in policy making for sustainable development, to indicate which positive and negative impacts one can expect of these choices (trade-offs), and to identify options that may be robust under several worldviews. The conceptualization proposed here is both clear and applicable in practical sustainability assessments for policy making. (author)

  7. Integrated modeling of agricultural scenarios (IMAS) to support pesticide action plans: the case of the Coulonge drinking water catchment area (SW France).

    Science.gov (United States)

    Vernier, Françoise; Leccia-Phelpin, Odile; Lescot, Jean-Marie; Minette, Sébastien; Miralles, André; Barberis, Delphine; Scordia, Charlotte; Kuentz-Simonet, Vanessa; Tonneau, Jean-Philippe

    2017-03-01

    Non-point source pollution is a cause of major concern within the European Union. This is reflected in increasing public and political focus on a more sustainable use of pesticides, as well as a reduction in diffuse pollution. Climate change will likely to lead to an even more intensive use of pesticides in the future, affecting agriculture in many ways. At the same time, the Water Framework Directive (WFD) and associated EU policies called for a "good" ecological and chemical status to be achieved for water bodies by the end of 2015, currently delayed to 2021-2027 due to a lack of efficiency in policies and timescale of resilience for hydrosystems, especially groundwater systems. Water managers need appropriate and user-friendly tools to design agro-environmental policies. These tools should help them to evaluate the potential impacts of mitigation measures on water resources, more clearly define protected areas, and more efficiently distribute financial incentives to farmers who agree to implement alternative practices. At present, a number of reports point out that water managers do not use appropriate information from monitoring or models to make decisions and set environmental action plans. In this paper, we propose an integrated and collaborative approach to analyzing changes in land use, farming systems, and practices and to assess their effects on agricultural pressure and pesticide transfers to waters. The integrated modeling of agricultural scenario (IMAS) framework draws on a range of data and expert knowledge available within areas where a pesticide action plan can be defined to restore the water quality, French "Grenelle law" catchment areas, French Water Development and Management Plan areas, etc. A so-called "reference scenario" represents the actual soil occupation and pesticide-spraying practices used in both conventional and organic farming. A number of alternative scenarios are then defined in cooperation with stakeholders, including socio

  8. Energy-Efficient Transmissions for Remote Wireless Sensor Networks: An Integrated HAP/Satellite Architecture for Emergency Scenarios

    Science.gov (United States)

    Dong, Feihong; Li, Hongjun; Gong, Xiangwu; Liu, Quan; Wang, Jingchao

    2015-01-01

    A typical application scenario of remote wireless sensor networks (WSNs) is identified as an emergency scenario. One of the greatest design challenges for communications in emergency scenarios is energy-efficient transmission, due to scarce electrical energy in large-scale natural and man-made disasters. Integrated high altitude platform (HAP)/satellite networks are expected to optimally meet emergency communication requirements. In this paper, a novel integrated HAP/satellite (IHS) architecture is proposed, and three segments of the architecture are investigated in detail. The concept of link-state advertisement (LSA) is designed in a slow flat Rician fading channel. The LSA is received and processed by the terminal to estimate the link state information, which can significantly reduce the energy consumption at the terminal end. Furthermore, the transmission power requirements of the HAPs and terminals are derived using the gradient descent and differential equation methods. The energy consumption is modeled at both the source and system level. An innovative and adaptive algorithm is given for the energy-efficient path selection. The simulation results validate the effectiveness of the proposed adaptive algorithm. It is shown that the proposed adaptive algorithm can significantly improve energy efficiency when combined with the LSA and the energy consumption estimation. PMID:26404292

  9. Energy-Efficient Transmissions for Remote Wireless Sensor Networks: An Integrated HAP/Satellite Architecture for Emergency Scenarios

    Directory of Open Access Journals (Sweden)

    Feihong Dong

    2015-09-01

    Full Text Available A typical application scenario of remote wireless sensor networks (WSNs is identified as an emergency scenario. One of the greatest design challenges for communications in emergency scenarios is energy-efficient transmission, due to scarce electrical energy in large-scale natural and man-made disasters. Integrated high altitude platform (HAP/satellite networks are expected to optimally meet emergency communication requirements. In this paper, a novel integrated HAP/satellite (IHS architecture is proposed, and three segments of the architecture are investigated in detail. The concept of link-state advertisement (LSA is designed in a slow flat Rician fading channel. The LSA is received and processed by the terminal to estimate the link state information, which can significantly reduce the energy consumption at the terminal end. Furthermore, the transmission power requirements of the HAPs and terminals are derived using the gradient descent and differential equation methods. The energy consumption is modeled at both the source and system level. An innovative and adaptive algorithm is given for the energy-efficient path selection. The simulation results validate the effectiveness of the proposed adaptive algorithm. It is shown that the proposed adaptive algorithm can significantly improve energy efficiency when combined with the LSA and the energy consumption estimation.

  10. Energy-Efficient Transmissions for Remote Wireless Sensor Networks: An Integrated HAP/Satellite Architecture for Emergency Scenarios.

    Science.gov (United States)

    Dong, Feihong; Li, Hongjun; Gong, Xiangwu; Liu, Quan; Wang, Jingchao

    2015-09-03

    A typical application scenario of remote wireless sensor networks (WSNs) is identified as an emergency scenario. One of the greatest design challenges for communications in emergency scenarios is energy-efficient transmission, due to scarce electrical energy in large-scale natural and man-made disasters. Integrated high altitude platform (HAP)/satellite networks are expected to optimally meet emergency communication requirements. In this paper, a novel integrated HAP/satellite (IHS) architecture is proposed, and three segments of the architecture are investigated in detail. The concept of link-state advertisement (LSA) is designed in a slow flat Rician fading channel. The LSA is received and processed by the terminal to estimate the link state information, which can significantly reduce the energy consumption at the terminal end. Furthermore, the transmission power requirements of the HAPs and terminals are derived using the gradient descent and differential equation methods. The energy consumption is modeled at both the source and system level. An innovative and adaptive algorithm is given for the energy-efficient path selection. The simulation results validate the effectiveness of the proposed adaptive algorithm. It is shown that the proposed adaptive algorithm can significantly improve energy efficiency when combined with the LSA and the energy consumption estimation.

  11. Diagnostic health risk assessment of electronic waste on the general population in developing countries' scenarios

    International Nuclear Information System (INIS)

    Frazzoli, Chiara; Orisakwe, Orish Ebere; Dragone, Roberto; Mantovani, Alberto

    2010-01-01

    E-waste is the generic name for technological waste. Even though aspects related to e-waste environmental pollution and human exposure are known, scientific assessments are missing so far on the actual risks for health sustainability of the general population exposed to e-waste scenarios, such as illicit dumping, crude recycling and improper treatment and disposal. In fact, further to occupational and direct local exposure, e-waste scenarios may impact on the environment-to-food chain, thus eliciting a widespread and repeated exposure of the general population to mixtures of toxicants, mainly toxic chemical elements, polycyclic aromatic hydrocarbons and persistent organic pollutants. In the absence of any clear policy on e-waste flow management, the situation in the e-waste receiver countries may become quite scary; accordingly, here we address a diagnostic risk assessment of health issues potentially elicited by e-waste related mixtures of toxicants. Scientific evidence available so far (mainly from China) is discussed with special attention to the concept of health sustainability, i.e. the poor health burden heritage perpetuated through the mother-to-child dyad. Endocrine disruption and neurotoxicity are specifically considered as examples of main health burden issues relevant to perpetuation through life cycle and across generations; toxicological information are considered along with available data on environmental and food contamination and human internal exposure. The risk from exposure to e-waste related mixtures of toxicants of vulnerable subpopulation like breast-fed infants is given special attention. The diagnostic risk assessment demonstrates how e-waste exposure poses an actual public health emergency, as it may entrain significant health risks also for generations to come. Exposure scenarios as well as specific chemicals of major concern may vary in different contexts; for instance, only limited information is available on e-waste related exposures in

  12. Real-geographic-scenario-based virtual social environments: integrating geography with social research

    OpenAIRE

    Min Chen; Li He; Hui Lin; Chunxiao Zhang; Mingyuan Hu

    2013-01-01

    Existing online virtual worlds, or electronic environments, are of great significance to social science research, but are somewhat lacking in rigour. One reason is that users might not participate in those virtual worlds in the way they act in real daily life, communicating with each other in familiar environments and interacting with natural phenomena under the constraints of the human–land relationship. To help solve this problem we propose the real-geographic-scenario-based virtual social ...

  13. From regulation through integration to? Three scenarios for the future of electricity in Europe

    Energy Technology Data Exchange (ETDEWEB)

    Larsen, E.R. [Department of Management, University of Bologna, Bologna (Italy)

    1998-04-01

    A major change is underway in the European Union electricity sector, where the electricity market will be partly opened for competition. There is a required minimum opening of the generation market, although countries may exceed it. However, given the very different structures, technological mixes and national cultures, will a single market be possible? This paper outlines three different scenarios of how the European electricity market might evolve. (au)

  14. Assessment of hi-resolution multi-ensemble statistical downscaling regional climate scenarios over Japan

    Science.gov (United States)

    Dairaku, K.

    2017-12-01

    The Asia-Pacific regions are increasingly threatened by large scale natural disasters. Growing concerns that loss and damages of natural disasters are projected to further exacerbate by climate change and socio-economic change. Climate information and services for risk assessments are of great concern. Fundamental regional climate information is indispensable for understanding changing climate and making decisions on when and how to act. To meet with the needs of stakeholders such as National/local governments, spatio-temporal comprehensive and consistent information is necessary and useful for decision making. Multi-model ensemble regional climate scenarios with 1km horizontal grid-spacing over Japan are developed by using CMIP5 37 GCMs (RCP8.5) and a statistical downscaling (Bias Corrected Spatial Disaggregation (BCSD)) to investigate uncertainty of projected change associated with structural differences of the GCMs for the periods of historical climate (1950-2005) and near future climate (2026-2050). Statistical downscaling regional climate scenarios show good performance for annual and seasonal averages for precipitation and temperature. The regional climate scenarios show systematic underestimate of extreme events such as hot days of over 35 Celsius and annual maximum daily precipitation because of the interpolation processes in the BCSD method. Each model projected different responses in near future climate because of structural differences. The most of CMIP5 37 models show qualitatively consistent increase of average and extreme temperature and precipitation. The added values of statistical/dynamical downscaling methods are also investigated for locally forced nonlinear phenomena, extreme events.

  15. Integrating Ecohealth Assessment in the Americas | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    However, very few impact assessment laws are adequately implemented in Latin ... Integrated eco-health assessment law in the Americas : a hemispheric research ... IWRA/IDRC webinar on climate change and adaptive water management. International Water Resources Association, in close collaboration with IDRC, ...

  16. PRESSCA: A regional operative Early Warning System for landslides risk scenario assessment

    Science.gov (United States)

    Ponziani, Francesco; Stelluti, Marco; Berni, Nicola; Brocca, Luca; Moramarco, Tommaso

    2013-04-01

    recently coupled with quantitative rainfall and temperature forecasts (given by the COSMO ME local scale models for Umbria) to extend the prediction up to 72 hours forecast. The main output is constituted by four spatially distributed early warning indicators (normal, caution, warning, alarm), in compliance with national and regional law, based on the comparison between the observed (forecasted) rainfall and the dynamic thresholds. The early warning indicators, calculated over the whole regional territory, are combined with susceptibility and vulnerability layers using a WEB-GIS platform, in order to build a near real time risk scenario. The main outcome of the system is a spatially distributed landslide hazard map with the highlight of areas where local risk situations may arise due to landslides induced by the interaction between meteorological forcing and the presence of vulnerability elements. The System is inclusive of specific sections dedicated to areas with specific risks (as debris flows prone areas), with specific thresholds. The main purpose of this study is firstly to describe the operational early warning system. Then, the integration of near real-time soil moisture data obtained through the satellite sensor ASCAT (Advanced SCATterometer) within the system is shown. This could allow enhancing the reliability of the modelled soil moisture data over the regional territory. The recent rainfall event of 11-14 November 2012 is used as case study. Reported triggered landslides are studied and used in order to check/refine the early warning system.

  17. Assessing the Robustness of Green Infrastructure under Stochastic Design Storms and Climate Change Scenarios

    Science.gov (United States)

    Chui, T. F. M.; Yang, Y.

    2017-12-01

    Green infrastructures (GI) have been widely used to mitigate flood risk, improve surface water quality, and to restore predevelopment hydrologic regimes. Commonly-used GI include, bioretention system, porous pavement and green roof, etc. They are normally sized to fulfil different design criteria (e.g. providing certain storage depths, limiting peak surface flow rates) that are formulated for current climate conditions. While GI commonly have long lifespan, the sensitivity of their performance to climate change is however unclear. This study first proposes a method to formulate suitable design criteria to meet different management interests (e.g. different levels of first flush reduction and peak flow reduction). Then typical designs of GI are proposed. In addition, a high resolution stochastic design storm generator using copulas and random cascade model is developed, which is calibrated using recorded rainfall time series. Then, few climate change scenarios are generated by varying the duration and depth of design storms, and changing the parameters of the calibrated storm generator. Finally, the performance of GI with typical designs under the random synthesized design storms are then assessed using numerical modeling. The robustness of the designs is obtained by the comparing their performance in the future scenarios to the current one. This study overall examines the robustness of the current GI design criteria under uncertain future climate conditions, demonstrating whether current GI design criteria should be modified to account for climate change.

  18. Development of sea level rise scenarios for climate change assessments of the Mekong Delta, Vietnam

    Science.gov (United States)

    Doyle, Thomas W.; Day, Richard H.; Michot, Thomas C.

    2010-01-01

    Rising sea level poses critical ecological and economical consequences for the low-lying megadeltas of the world where dependent populations and agriculture are at risk. The Mekong Delta of Vietnam is one of many deltas that are especially vulnerable because much of the land surface is below mean sea level and because there is a lack of coastal barrier protection. Food security related to rice and shrimp farming in the Mekong Delta is currently under threat from saltwater intrusion, relative sea level rise, and storm surge potential. Understanding the degree of potential change in sea level under climate change is needed to undertake regional assessments of potential impacts and to formulate adaptation strategies. This report provides constructed time series of potential sea level rise scenarios for the Mekong Delta region by incorporating (1) aspects of observed intra- and inter-annual sea level variability from tide records and (2) projected estimates for different rates of regional subsidence and accelerated eustacy through the year 2100 corresponding with the Intergovernmental Panel on Climate Change (IPCC) climate models and emission scenarios.

  19. Using Optimal Land-Use Scenarios to Assess Trade-Offs between Conservation, Development, and Social Values.

    Science.gov (United States)

    Adams, Vanessa M; Pressey, Robert L; Álvarez-Romero, Jorge G

    2016-01-01

    Development of land resources can contribute to increased economic productivity but can also negatively affect the extent and condition of native vegetation, jeopardize the persistence of native species, reduce water quality, and erode ecosystem services. Spatial planning must therefore balance outcomes for conservation, development, and social goals. One approach to evaluating these trade-offs is scenario planning. In this paper we demonstrate methods for incorporating stakeholder preferences into scenario planning through both defining scenario objectives and evaluating the scenarios that emerge. In this way, we aim to develop spatial plans capable of informing actual land-use decisions. We used a novel approach to scenario planning that couples optimal land-use design and social evaluation of environmental outcomes. Four land-use scenarios combined differences in total clearing levels (10% and 20%) in our study region, the Daly Catchment Australia, with the presence or absence of spatial precincts to concentrate irrigated agriculture. We used the systematic conservation planning tool Marxan with Zones to optimally plan for multiple land-uses that met objectives for both conservation and development. We assessed the performance of the scenarios in terms of the number of objectives met and the degree to which existing land-use policies were compromised (e.g., whether clearing limits in existing guidelines were exceeded or not). We also assessed the land-use scenarios using expected stakeholder satisfaction with changes in the catchment to explore how the scenarios performed against social preferences. There were a small fraction of conservation objectives with high conservation targets (100%) that could not be met due to current land uses; all other conservation and development objectives were met in all scenarios. Most scenarios adhered to the existing clearing guidelines with only marginal exceedances of limits, indicating that the scenario objectives were

  20. Using Optimal Land-Use Scenarios to Assess Trade-Offs between Conservation, Development, and Social Values.

    Directory of Open Access Journals (Sweden)

    Vanessa M Adams

    Full Text Available Development of land resources can contribute to increased economic productivity but can also negatively affect the extent and condition of native vegetation, jeopardize the persistence of native species, reduce water quality, and erode ecosystem services. Spatial planning must therefore balance outcomes for conservation, development, and social goals. One approach to evaluating these trade-offs is scenario planning. In this paper we demonstrate methods for incorporating stakeholder preferences into scenario planning through both defining scenario objectives and evaluating the scenarios that emerge. In this way, we aim to develop spatial plans capable of informing actual land-use decisions. We used a novel approach to scenario planning that couples optimal land-use design and social evaluation of environmental outcomes. Four land-use scenarios combined differences in total clearing levels (10% and 20% in our study region, the Daly Catchment Australia, with the presence or absence of spatial precincts to concentrate irrigated agriculture. We used the systematic conservation planning tool Marxan with Zones to optimally plan for multiple land-uses that met objectives for both conservation and development. We assessed the performance of the scenarios in terms of the number of objectives met and the degree to which existing land-use policies were compromised (e.g., whether clearing limits in existing guidelines were exceeded or not. We also assessed the land-use scenarios using expected stakeholder satisfaction with changes in the catchment to explore how the scenarios performed against social preferences. There were a small fraction of conservation objectives with high conservation targets (100% that could not be met due to current land uses; all other conservation and development objectives were met in all scenarios. Most scenarios adhered to the existing clearing guidelines with only marginal exceedances of limits, indicating that the scenario

  1. Integrated monitoring and assessment of air pollution

    Energy Technology Data Exchange (ETDEWEB)

    Hertel, O.

    2009-09-15

    Improved quality, better understanding of processes and optimisation of allocated resources, these are the main advantages of applying Integrated Monitoring and Assessment (IMA) in air quality management. The IMA is defined as the combined use of measurements and model calculations. The use of IMA is demonstrated with examples with different aims: to obtain data for air pollution in urban streets, to assess human exposure to traffic air pollution, and to assess atmospheric deposition of nitrogen compounds to marine and terrestrial ecosystems. (author)

  2. The use of engineering design scenarios to assess student knowledge of global, societal, economic, and environmental contexts

    Science.gov (United States)

    McKenna, Ann F.; Hynes, Morgan M.; Johnson, Amy M.; Carberry, Adam R.

    2016-07-01

    Product archaeology as an educational approach asks engineering students to consider and explore the broader societal and global impacts of a product's manufacturing, distribution, use, and disposal on people, economics, and the environment. This study examined the impact of product archaeology in a project-based engineering design course on student attitudes and perceptions about engineering and abilities to extend and refine knowledge about broader contexts. Two design scenarios were created: one related to dental hygiene and one related to vaccination delivery. Design scenarios were used to (1) assess knowledge of broader contexts, and (2) test variability of student responses across different contextual situations. Results from pre- to post-surveying revealed improved student perceptions of knowledge of broader contexts. Significant differences were observed between the two design scenarios. The findings support the assumption that different design scenarios elicit consideration of different contexts and design scenarios can be constructed to target specific contextual considerations.

  3. Scenario-based potential effects of carbon trading in China: An integrated approach

    International Nuclear Information System (INIS)

    Zhang, Cheng; Wang, Qunwei; Shi, Dan; Li, Pengfei; Cai, Wanhuan

    2016-01-01

    Highlights: • Carbon dioxide shadow price shows a negative asymmetrical correlation with carbon dioxide emissions in China. • The implements of carbon trading can bring Porter Hypothesis effect significantly. • Provincial carbon trading can reduce carbon intensity by 19.79–25.24% in China. - Abstract: Using China’s provincial panel data and national panel data of OECD (Organization for Economic Co-operation and Development) and BRICS (Five major emerging national economies: Brazil, Russia, India, China and South Africa), this paper simulates the scenario-based potential effect of carbon trading in China. Analysis methods included Stochastic Frontier Analysis, Difference-in-differences Model, and Nonlinear Programming Technique. Results indicated that in a theory-based view of carbon trading, the shadow price of carbon dioxide generally rises, with a non-linear negative correlation with carbon dioxide emissions. In different regions, the shadow price of carbon dioxide presents a digressive tendency among eastern, central, and western areas, with divergent gaps between and within areas. When the greatest goal is assumed to reduce national carbon intensity as much as possible at the given national GDP (Gross Domestic Product) (Scenario I), carbon trading has the effect of reducing carbon intensity by 19.79%, with the consideration of Porter Hypothesis effect. If the rigid constraint of national GDP is relaxed, and the dual constraint of both economic growth and environment protection in each region is introduced (Scenario II), the resulting effect is a reduced carbon intensity of 25.24%. China’s general carbon intensity in 2012 was higher than goals set at the Copenhagen Conference, but lagged behind the goal of Twelfth Five-Year Plan for National Economy. This study provides realistic and significant technical support for the government to use in designing and deploying a national carbon trading market.

  4. Life cycle assessment and residue leaching: The importance of parameter, scenario and leaching data selection

    DEFF Research Database (Denmark)

    Allegrini, Elisa; Butera, Stefania; Kosson, D.S.

    2015-01-01

    of systems and products and can be applied to waste management systems to identify environmental benefits and critical aspects thereof. From an LCA perspective, residue utilisation provides benefits such as avoiding the production and depletion of primary materials, but it can lead to environmental burdens......Residues from industrial processes and waste management systems (WMSs) have been increasingly reutilised, leading to landfilling rate reductions and the optimisation of mineral resource utilisation in society. Life cycle assessment (LCA) is a holistic methodology allowing for the analysis......, due to the potential leaching of toxic substances. In waste LCA studies where residue utilisation is included, leaching has generally been neglected. In this study, municipal solid waste incineration bottom ash (MSWI BA) was used as a case study into three LCA scenarios having different system...

  5. Risk assessment of integrated electronic health records.

    Science.gov (United States)

    Bjornsson, Bjarni Thor; Sigurdardottir, Gudlaug; Stefansson, Stefan Orri

    2010-01-01

    The paper describes the security concerns related to Electronic Health Records (EHR) both in registration of data and integration of systems. A description of the current state of EHR systems in Iceland is provided, along with the Ministry of Health's future vision and plans. New legislation provides the opportunity for increased integration of EHRs and further collaboration between institutions. Integration of systems, along with greater availability and access to EHR data, requires increased security awareness since additional risks are introduced. The paper describes the core principles of information security as it applies to EHR systems and data. The concepts of confidentiality, integrity, availability, accountability and traceability are introduced and described. The paper discusses the legal requirements and importance of performing risk assessment for EHR data. Risk assessment methodology according to the ISO/IEC 27001 information security standard is described with examples on how it is applied to EHR systems.

  6. WEB-GIS FOR ASSESSING SCENARIOS OF USING NATURAL RESOURCE POTENTIAL OF SOUTHERN MACROREGION

    Directory of Open Access Journals (Sweden)

    O. E. Аrkhipova

    2017-01-01

    Full Text Available The article is devoted to the use of geoinformation technologies, including “cloud” services, for assessing the natural resource potential of the southern macroregion. The toolkit has been proposed to evaluate various scenarios of social and economic development of the regions and the associated use of the natural resource potential of the southern region. The geoinformation system for the regions of the South of Russia and a web application have been created.The methodology for assessing scenarios for usind the natural resource potential of the southern macroregion have been developed using ArcGis Online cloud technology. This technology allows you to run and maintain software and store data on the server by creating a private or combined cloud. Web-GIS are created on the basis of the interactive designer Story Map Journal℠.The relations in the nature-society system are evaluated on the example of two subjects of the Russian Federation that are part of the Southern and North-Caucasian federal districts – Rostov region and the Kabardino-Balkarian Republic. Investigation of the natural resource potential of the southern regions of Russia involves comparing the available reserves of a particular type of resources and the degree of their use. A comparison of the potential resource reserve and the real intensity of its consumption in the municipalities of these regions formed the basis for interpreting the obtained estimates of the efficiency of using of the natural resource potential. Quantitative estimates are obtained at the level of municipal regions using developed software tools that combine GIS, databases and mathematical modeling.

  7. Review of scenario selection approaches for performance assessment of high-level waste repositories and related issues

    International Nuclear Information System (INIS)

    Banano, E.J.; Baca, R.G.

    1995-08-01

    The selection of scenarios representing plausible realizations of the future conditions-with associated probabilities of occurrence-that can affect the long-term performance of a high-level radioactive waste (HLW) repository is the commonly used method for treating the uncertainty in the prediction of the future states of the system. This method, conventionally referred to as the ''scenario approach,'' while common is not the only method to deal with this uncertainty; other method ''ch as the environmental simulation approach (ESA), have also been proposed. Two of the difficulties with the scenario approach are the lack of uniqueness in the definition of the term ''scenario'' and the lack of uniqueness in the approach to formulate scenarios, which relies considerably on subjective judgments. Consequently, it is difficult to assure that a complete and unique set of scenarios can be defined for use in a performance assessment. Because scenarios are key to the determination of the long-term performance of the repository system, this lack of uniqueness can present a considerable challenge when attempting to reconcile the set of scenarios, and their level of detail, obtained using different approaches, particularly among proponents and regulators of a HLW repository

  8. Review of scenario selection approaches for performance assessment of high-level waste repositories and related issues.

    Energy Technology Data Exchange (ETDEWEB)

    Banano, E.J. [Beta Corporation International, Albuquerque, NM (United States); Baca, R.G. [Southwest Research Inst., San Antonio, TX (United States). Center for Nuclear Waste Regulatory Analyses

    1995-08-01

    The selection of scenarios representing plausible realizations of the future conditions-with associated probabilities of occurrence-that can affect the long-term performance of a high-level radioactive waste (HLW) repository is the commonly used method for treating the uncertainty in the prediction of the future states of the system. This method, conventionally referred to as the ``scenario approach,`` while common is not the only method to deal with this uncertainty; other method ``ch as the environmental simulation approach (ESA), have also been proposed. Two of the difficulties with the scenario approach are the lack of uniqueness in the definition of the term ``scenario`` and the lack of uniqueness in the approach to formulate scenarios, which relies considerably on subjective judgments. Consequently, it is difficult to assure that a complete and unique set of scenarios can be defined for use in a performance assessment. Because scenarios are key to the determination of the long-term performance of the repository system, this lack of uniqueness can present a considerable challenge when attempting to reconcile the set of scenarios, and their level of detail, obtained using different approaches, particularly among proponents and regulators of a HLW repository.

  9. Bringing Water into an Integrated Assessment Framework

    Energy Technology Data Exchange (ETDEWEB)

    Izaurralde, Roberto C.; Thomson, Allison M.; Sands, Ronald; Pitcher, Hugh M.

    2010-11-30

    We developed a modeling capability to understand how water is allocated within a river basin and examined present and future water allocations among agriculture, energy production, other human requirements, and ecological needs. Water is an essential natural resource needed for food and fiber production, household and industrial uses, energy production, transportation, tourism and recreation, and the functioning of natural ecosystems. Anthropogenic climate change and population growth are anticipated to impose unprecedented pressure on water resources during this century. Pacific Northwest National Laboratory (PNNL) researchers have pioneered the development of integrated assessment (IA) models for the analysis of energy and economic systems under conditions of climate change. This Laboratory Directed Research and Development (LDRD) effort led to the development of a modeling capability to evaluate current and future water allocations between human requirements and ecosystem services. The Water Prototype Model (WPM) was built in STELLA®, a computer modeling package with a powerful interface that enables users to construct dynamic models to simulate and integrate many processes (biological, hydrological, economics, sociological). A 150,404-km2 basin in the United States (U.S.) Pacific Northwest region served as the platform for the development of the WPM. About 60% of the study basin is in the state of Washington with the rest in Oregon. The Columbia River runs through the basin for 874 km, starting at the international border with Canada and ending (for the purpose of the simulation) at The Dalles dam. Water enters the basin through precipitation and from streamflows originating from the Columbia River at the international border with Canada, the Spokane River, and the Snake River. Water leaves the basin through evapotranspiration, consumptive uses (irrigation, livestock, domestic, commercial, mining, industrial, and off-stream power generation), and streamflow

  10. Radioactive waste assessment using 'minimum waste generation' scenario - summary report March 1984

    International Nuclear Information System (INIS)

    Richardson, J.A.; Goodill, D.R.; Tymons, B.J.

    1984-11-01

    This report describes an assessment of radioactive waste management arisings from a defined nuclear power generation - Scheme 1. Scheme 1 assumes a minimum waste generation scenario with raw waste arisings from 3 main groups; (i) existing and committed commercial reactors; (ii) fuel reprocessing plants, (iii) research, industry and medicine. No decommissioning wastes are considered except for arisings from the final fuel cores from decommissioned reactors. The study uses the SIMULATION2 code which models waste material flows through the system. With a knowledge of the accumulations and average production rates of the raw wastes and their isotopic compositions (or total activities), the rates at which conditioned wastes become available for transportation and disposal are calculated, with specific activity levels. The data bases for the inventory calculations and the assumptions concerning future operation of nuclear facilities were those current in 1983. Both the inventory data and plans for the future of existing nuclear installations have been updated since these calculations were completed. Therefore the results from this assessment do not represent the most up-to-date information available. The report does, however, illustrate the methodology of assessment and indicates the type of information that can be generated. (author)

  11. Integrated Nitrogen and Flow Modelling (INCA) in a Boreal River Basin Dominated by Forestry: Scenarios of Environmental Change

    International Nuclear Information System (INIS)

    Rankinen, Katri; Lepistoe, Ahti; Granlund, Kirsti

    2004-01-01

    A new version (v1.7) of the Integrated Nitrogen in CAtchments model(INCA) was applied to the northern boreal Simojoki river basin (3160 km 2 ) in Finland. The INCA model is a semi-distributed, dynamic nitrogen (N) process model which simulates N transport and processes in catchments. The INCA model was applied to model flow and seasonal inorganic N dynamics of the river Simojoki basin over the period 1994-1996, and validated for two more years. Both calibration and validation of the model were successful. The model was able to simulate annual dynamics of inorganic N concentrations in the river. The effects of forest management and atmospheric deposition on inorganic N fluxes to the sea in 2010 were studied. Three scenarios were applied for forestry practices and two for deposition. The effects of forest cutting scenarios and atmospheric deposition scenarios on inorganic N flux to the sea were small. The combination of the maximum technically possible reduction of N deposition and a decrease of 100% in forest cutting and peat mining areas decreased NO 3 - -N flux by 6.0% and NH 4 + -N flux by 3.1%

  12. Integrated assessment of dispersed energy resources deployment

    Energy Technology Data Exchange (ETDEWEB)

    Marnay, Chris; Blanco, Raquel; Hamachi, Kristina S.; Kawaan, Cornelia P.; Osborn, Julie G.; Rubio, F. Javier

    2000-06-01

    The goal of this work is to create an integrated framework for forecasting the adoption of distributed energy resources (DER), both by electricity customers and by the various institutions within the industry itself, and for evaluating the effect of this adoption on the power system, particularly on the overall reliability and quality of electrical service to the end user. This effort and follow on contributions are intended to anticipate and explore possible patterns of DER deployment, thereby guiding technical work on microgrids towards the key technical problems. An early example of this process addressed is the question of possible DER adopting customer disconnection. A deployment scenario in which many customers disconnect from their distribution company (disco) entirely leads to a quite different set of technical problems than a scenario in which customers self generate a significant share or all of their on-site electricity requirements and additionally buy and sell energy and ancillary services (AS) locally and/or into wider markets. The exploratory work in this study suggests that the economics under which customers disconnect entirely are unlikely.

  13. The importance of meteorology in the environmental impacts assessment of nuclear power plants: scenarios studies using geographic information system

    International Nuclear Information System (INIS)

    Leao, I.L.B.; Biagio, R.M.S.; Costa, E.M.; Alves, R.N.

    1999-01-01

    The Brazilian Nuclear Power Plant (CNAAA) is located in a very complex region of the state of Rio de Janeiro. The environmental impact caused by the normal operation of such installation can be better evaluated by using an integrated approach, in which a geographical information system plays a very important role. In this study, environmental scenarios are integrated with some extreme and representative meteorological situations. (author)

  14. Integration of power over fiber on RoF systems in different scenarios

    Science.gov (United States)

    Vázquez, C.; Montero, D. S.; Pinzón, P. J.; López-Cardona, J. D.; Contreras, P.; Tapetado, A.

    2017-01-01

    Future high capacity of the 5th Generation radio environment will boost transport networks to be adapted. The high bandwidth, together with stringent delay and jitter requirements, make dedicated optical connectivity a preferred solution for fronthaul. Those Radio Access Networks apart from higher capacity and lower latency should have higher energy efficiency. In order to cover this aspect, power over fiber has been pointed out as a key technology for that purpose having in mind that control plane will be centralized on future Cloud RAN and that sometimes Remote Radio Heads should be deployed in places lacking external power supply in order to fulfill the desired coverage. In this paper, different scenarios on potential demanding environments of power over fiber on Radio over Fiber systems such as automotive, in-house and remote mobile fronthaul will be discussed. Some tests on power over fiber systems based on different optical fibers are provided.

  15. Updates to the Demographic and Spatial Allocation Models to Produce Integrated Climate and Land Use Scenarios (ICLUS) (Final Report, Version 2)

    Science.gov (United States)

    EPA's announced the availability of the final report, Updates to the Demographic and Spatial Allocation Models to Produce Integrated Climate and Land Use Scenarios (ICLUS) (Version 2). This update furthered land change modeling by providing nationwide housing developmen...

  16. Assessment of Alternative Scenarios for CO2 Reduction Potential in the Residential Building Sector

    Directory of Open Access Journals (Sweden)

    Young-Sun Jeong

    2017-03-01

    Full Text Available The South Korean government announced its goals of reducing the country’s CO2 emissions by up to 30% below the business as usual (BAU projections by 2020 in 2009 and 37% below BAU projections by 2030 in 2015. This paper explores the potential energy savings and reduction in CO2 emissions offered by residential building energy efficiency policies and plans in South Korea. The current and future energy consumption and CO2 emissions in the residential building were estimated using an energy–environment model from 2010 to 2030. The business as usual scenario is based on the energy consumption characteristic of residential buildings using the trends related to socio-economic prospects and the number of dwellings. The alternative scenarios took into account energy efficiency for new residential buildings (scenario I, refurbishment of existing residential buildings (scenario II, use of highly efficient boilers (scenario III, and use of a solar thermal energy system (scenario IV. The results show that energy consumption in the residential building sector will increase by 33% between 2007 and 2030 in the BAU scenario. Maximum reduction in CO2 emissions in the residential building sector of South Korea was observed by 2030 in scenario I. In each alternative scenario analysis, CO2 emissions were 12.9% lower than in the business as usual scenario by the year 2030.

  17. Assessment of riverine load of contaminants to European seas under policy implementation scenarios: an example with 3 pilot substances.

    Science.gov (United States)

    Marinov, Dimitar; Pistocchi, Alberto; Trombetti, Marco; Bidoglio, Giovanni

    2014-01-01

    An evaluation of conventional emission scenarios is carried out targeting a possible impact of European Union (EU) policies on riverine loads to the European seas for 3 pilot pollutants: lindane, trifluralin, and perfluorooctane sulfonate (PFOS). The policy scenarios are investigated to the time horizon of year 2020 starting from chemical-specific reference conditions and considering different types of regulatory measures including business as usual (BAU), current trend (CT), partial implementation (PI), or complete ban (PI ban) of emissions. The scenario analyses show that the model-estimated lindane load of 745 t to European seas in 1995, based on the official emission data, would be reduced by 98.3% to approximately 12.5 t in 2005 (BAU scenario), 10 years after the start of the EU regulation of this chemical. The CT and PI ban scenarios indicate a reduction of sea loads of lindane in 2020 by 74% and 95%, respectively, when compared to the BAU estimate. For trifluralin, an annual load of approximately 61.7 t is estimated for the baseline year 2003 (BAU scenario), although the applied conservative assumptions related to pesticide use data availability in Europe. Under the PI (ban) scenario, assuming only small residual emissions of trifluralin, we estimate a sea loading of approximately 0.07 t/y. For PFOS, the total sea load from all European countries is estimated at approximately 5.8 t/y referred to 2007 (BAU scenario). Reducing the total load of PFOS below 1 t/y requires emissions to be reduced by 84%. The analysis of conventional scenarios or scenario typologies for emissions of contaminants using simple spatially explicit GIS-based models is suggested as a viable, affordable exercise that may support the assessment of implementation of policies and the identification or negotiation of emission reduction targets. © 2013 SETAC.

  18. Implementation and outcome evaluation of high-fidelity simulation scenarios to integrate cognitive and psychomotor skills for Korean nursing students.

    Science.gov (United States)

    Ahn, Heejung; Kim, Hyun-Young

    2015-05-01

    This study is involved in designing high-fidelity simulations reflecting the Korean nursing education environment. In addition, it evaluated the simulations by nursing students' learning outcomes and perceptions of the simulation design features. A quantitative design was used in two separate phases. For the first phase, five nursing experts participated in verifying the appropriateness of two simulation scenarios that reflected the intended learning objectives. For the second phase, 69 nursing students in the third year of a bachelor's degree at a nursing school participated in evaluating the simulations and were randomized according to their previous course grades. The first phase verified the two simulation scenarios using a questionnaire. The second phase evaluated students' perceptions of the simulation design, self-confidence, and critical thinking skills using a quasi-experimental post-test design. ANCOVA was used to compare the experimental and control groups, and correlation coefficient analysis was used to determine the correlation among them. We created 2 simulation scenarios to integrate cognitive and psychomotor skills according to the learning objectives and clinical environment in Korea. The experimental group had significantly higher scores on self-confidence in the first scenario. The positive correlations between perceptions of the simulation design features, self-confidence, and critical thinking skill scores were statistically significant. Students with a more positive perception of the design features of the simulations had better learning outcomes. Based on this result, simulations need to be designed and implemented with more differentiation in order to be perceived more appropriately by students. Copyright © 2015 Elsevier Ltd. All rights reserved.

  19. Estimating insured residential losses from large flood scenarios on the Tone River, Japan - a data integration approach

    Science.gov (United States)

    Okada, T.; McAneney, K. J.; Chen, K.

    2011-12-01

    Flooding on the Tone River, which drains the largest catchment area in Japan and is now home to 12 million people, poses significant risk to the Greater Tokyo Area. In April 2010, an expert panel in Japan, the Central Disaster Prevention Council, examined the potential for large-scale flooding and outlined possible mitigation measures in the Greater Tokyo Area. One of the scenarios considered closely mimics the pattern of flooding that occurred with the passage of Typhoon Kathleen in 1947 and would potentially flood some 680 000 households above floor level. Building upon that report, this study presents a Geographical Information System (GIS)-based data integration approach to estimate the insurance losses for residential buildings and contents as just one component of the potential financial cost. Using a range of publicly available data - census information, location reference data, insurance market information and flood water elevation data - this analysis finds that insurance losses for residential property alone could reach approximately 1 trillion JPY (US 12.5 billion). Total insurance losses, including commercial and industrial lines of business, are likely to be at least double this figure with total economic costs being much greater again. The results are sensitive to the flood scenario assumed, position of levee failures, local flood depths and extents, population and building heights. The Average Recurrence Interval (ARI) of the rainfall following Typhoon Kathleen has been estimated to be on the order of 200 yr; however, at this juncture it is not possible to put an ARI on the modelled loss since we cannot know the relative or joint probability of the different flooding scenarios. It is possible that more than one of these scenarios could occur simultaneously or that levee failure at one point might lower water levels downstream and avoid a failure at all other points. In addition to insurance applications, spatial analyses like that presented here have

  20. The assessment of natural flood management measures as a climate change adaptation option through land use scenarios

    Science.gov (United States)

    Iacob, Oana; Rowan, John; Brown, Iain; Ellis, Chris

    2014-05-01

    Climate change is one of the most pressing issues facing civil society. Greater variability and more frequent extremes of temperature and precipitation will result in increased flood risk and corresponding social, economic and environmental impacts. Complementing more traditional structurally-based engineering interventions an important additional adaptation strategy is through natural flood management (NFM) measures utilising natural soil, wetland and groundwater storage at the catchment scale to attenuate runoff generation and downstream flooding. Such schemes have multiple co-benefits including improved water quality, biodiversity and amenity and so contribute to greater resilience to uncertain climate futures. As a case-study of a more integrated approach to land use planning we here consider the policy target of the Scottish Government to expand woodland in Scotland by 100,000 ha by 2025 from the current 3 000 ha/year. In this paper we examine runoff response under different woodland expansion scenarios using climate projections obtained from the UK Climate Projections (UKCP09). Woodland creation has recognised potential as a NFM measure, but locating this new planting is constrained by physical and cultural constraints. Land use choices in the future will also strongly reflect emergent socio-economic contexts, here assessed through scenario analysis. The distributed hydrological model WaSiM-ETH was utilised for the analysis using the case-study of the Tarland catchment, a tributary of the River Dee. Terrain data were obtained on a 50 m grid and the model calibrated using meteorological and river gauge data from 2005 to 2007 following a manual and an automatic calibration process. This novel approach highlights that land use change should be carefully managed for planned benefits and to avoid unintended consequences, such as changing the timing of tributary flood responses. Whilst woodland expansion may only provide modest gains in flood reductions the co

  1. Integration and Assessment of Multiple Mobile Manipulators in a Real-World Industrial Production Facility

    DEFF Research Database (Denmark)

    Bøgh, Simon; Schou, Casper; Rühr, Thomas

    2014-01-01

    This paper presents a large-scale research experiment carried out within the TAPAS project, where multiple mobile manipulators were integrated and assessed in an industrial context. We consider an industrial scenario in which mobile manipulators naturally extend automation of logistic tasks towar...

  2. Assessment of integrity of structures containing cracks

    International Nuclear Information System (INIS)

    Townley, C.H.A.

    1976-01-01

    The object of the investigations is to provide a method of assessing the safety and integrity of structures containing cracklike defects. Estimated load at which the cracked structure will fail is compared with the highest load likely to be applied in service

  3. Integrated assessment models of global climate change

    International Nuclear Information System (INIS)

    Parson, E.A.; Fisher-Vanden, K.

    1997-01-01

    The authors review recent work in the integrated assessment modeling of global climate change. This field has grown rapidly since 1990. Integrated assessment models seek to combine knowledge from multiple disciplines in formal integrated representations; inform policy-making, structure knowledge, and prioritize key uncertainties; and advance knowledge of broad system linkages and feedbacks, particularly between socio-economic and bio-physical processes. They may combine simplified representations of the socio-economic determinants of greenhouse gas emissions, the atmosphere and oceans, impacts on human activities and ecosystems, and potential policies and responses. The authors summarize current projects, grouping them according to whether they emphasize the dynamics of emissions control and optimal policy-making, uncertainty, or spatial detail. They review the few significant insights that have been claimed from work to date and identify important challenges for integrated assessment modeling in its relationships to disciplinary knowledge and to broader assessment seeking to inform policy- and decision-making. 192 refs., 2 figs

  4. Assessing the Sustainability of EU Timber Consumption Trends: Comparing Consumption Scenarios with a Safe Operating Space Scenario for Global and EU Timber Supply

    Directory of Open Access Journals (Sweden)

    Meghan O’Brien

    2017-12-01

    Full Text Available The growing demand for wood to meet EU renewable energy targets has increasingly come under scrutiny for potentially increasing EU import dependence and inducing land use change abroad, with associated impacts on the climate and biodiversity. This article builds on research accounting for levels of primary timber consumption—e.g., toward forest footprints—and developing reference values for benchmarking sustainability—e.g., toward land use targets—in order to improve systemic monitoring of timber and forest use. Specifically, it looks at future trends to assess how current EU policy may impact forests at an EU and global scale. Future demand scenarios are based on projections derived and adapted from the literature to depict developments under different scenario assumptions. Results reveal that by 2030, EU consumption levels on a per capita basis are estimated to be increasingly disproportionate compared to the rest of the world. EU consumption scenarios based on meeting around a 40% share of the EU renewable energy targets with timber would overshoot both the EU and global reference value range for sustainable supply capacities in 2030. Overall, findings support literature pointing to an increased risk of problem shifting relating to both how much and where timber needed for meeting renewable energy targets is sourced. It is argued that a sustainable level of timber consumption should be characterized by balance between supply (what the forest can provide on a sustainable basis and demand (how much is used on a per capita basis, considering the concept of fair shares. To this end, future research should close data gaps, increase methodological robustness and address the socio-political legitimacy of the safe operating space concept towards targets in the future. A re-use of timber within the economy should be supported to increase supply options.

  5. Influence of feedbacks from simulated crop growth on integrated regional hydrologic simulations under climate scenarios

    Science.gov (United States)

    van Walsum, P. E. V.

    2011-11-01

    Climate change impact modelling of hydrologic responses is hampered by climate-dependent model parameterizations. Reducing this dependency was one of the goals of extending the regional hydrologic modelling system SIMGRO with a two-way coupling to the crop growth simulation model WOFOST. The coupling includes feedbacks to the hydrologic model in terms of the root zone depth, soil cover, leaf area index, interception storage capacity, crop height and crop factor. For investigating whether such feedbacks lead to significantly different simulation results, two versions of the model coupling were set up for a test region: one with exogenous vegetation parameters, the "static" model, and one with endogenous simulation of the crop growth, the "dynamic" model WOFOST. The used parameterization methods of the static/dynamic vegetation models ensure that for the current climate the simulated long-term average of the actual evapotranspiration is the same for both models. Simulations were made for two climate scenarios. Owing to the higher temperatures in combination with a higher CO2-concentration of the atmosphere, a forward time shift of the crop development is simulated in the dynamic model; the used arable land crop, potatoes, also shows a shortening of the growing season. For this crop, a significant reduction of the potential transpiration is simulated compared to the static model, in the example by 15% in a warm, dry year. In consequence, the simulated crop water stress (the unit minus the relative transpiration) is lower when the dynamic model is used; also the simulated increase of crop water stress due to climate change is lower; in the example, the simulated increase is 15 percentage points less (of 55) than when a static model is used. The static/dynamic models also simulate different absolute values of the transpiration. The difference is most pronounced for potatoes at locations with ample moisture supply; this supply can either come from storage release of a

  6. An assessment of the potentials of nuclear power and carbon capture and storage in the long-term global warming mitigation options based on Asian Modeling Exercise scenarios

    International Nuclear Information System (INIS)

    Mori, Shunsuke

    2012-01-01

    This paper presents an evaluation of global warming mitigation options based on scenarios from the Asian Modeling Exercise. Using an extended version of the integrated assessment model MARIA-23 (Multiregional Approach for Resource and Industry Allocation), we analyze nuclear fuel recycling options, carbon capture and storage technologies (CCS), and biomass utilization. To assess the potential implications of decreased social acceptance of nuclear power in the wake of the Fukushima nuclear accident, additional scenarios including a nuclear power expansion limitation, are analyzed. We also evaluate MARIA-23 model simulation estimates of long-term contributions and interrelationships among nuclear power, biomass, and CCS. Finally, potential costs of nuclear limitation under carbon control policies are assessed. The simulation results in this paper suggest the following: (1) under the reference scenario, global GDP losses in climate limitation scenarios range from 1.3% per year to 3.9% per year in 2060, rising to between 3.5% per year and 4.5% per year in 2100; (2) the use of nuclear fuel reprocessing technologies increase rapidly in all carbon control policy scenarios; (3) under a scenario where the price of CO 2 is $30 and nuclear power expansion is strictly limited, GDP losses increase significantly—from 4.5% per year to 6.4% per year by 2100; (4) nuclear power and CCS are substitute mitigation technologies. With nuclear power technology available CCS deployment reaches approximately 15,000 Mt-CO 2 per year by 2010; without a nuclear power option, CCS deployment rises to more than 80,000 Mt-CO 2 per year; and (5) biomass utilization cannot fully compensate for limitations to nuclear power expansion in policy scenarios. In addition to examining the role of these three technologies on global scales, we report results for several major Asian regions, namely Japan, China, and India. China tends to deploy nuclear power (if available) in response to rapidly growing

  7. Online scenario labeling using a hidden Markov model for assessment of nuclear plant state

    International Nuclear Information System (INIS)

    Zamalieva, Daniya; Yilmaz, Alper; Aldemir, Tunc

    2013-01-01

    By taking into account both aleatory and epistemic uncertainties within the same probabilistic framework, dynamic event trees (DETs) provide more comprehensive and systematic coverage of possible scenarios following an initiating event compared to conventional event trees. When DET generation algorithms are applied to complex realistic systems, extremely large amounts of data can be produced due to both the large number of scenarios generated following a single initiating event and the large number of data channels that represent these scenarios. In addition, the computational time required for the simulation of each scenario can be very large (e.g. about 24 h of serial run simulation time for a 4 h station blackout scenario). Since scenarios leading to system failure are more of interest, a method is proposed for online labeling of scenarios as failure or non-failure. The algorithm first trains a Hidden Markov Model, which represents the behavior of non-failure scenarios, using a training set from previous simulations. Then, the maximum likelihoods of sample failure and non-failure scenarios fitting this model are computed. These values are used to determine the timestamp at which the labeling of a certain scenario should be performed. Finally, during the succeeding timestamps, the likelihood of each scenario fitting the learned model is computed, and a dynamic thresholding based on the previously calculated likelihood values is applied. The scenarios whose likelihood is higher than the threshold are labeled as non-failure. The proposed algorithm can further delay the non-failure scenarios or discontinue them in order to redirect the computational resources toward the failure scenarios, and reduce computational time and complexity. Experiments using RELAP5/3D model of a fast reactor utilizing an Reactor Vessel Auxiliary Cooling System (RVACS) passive decay heat removal system and dynamic analysis of a station blackout (SBO) event show that the proposed method is

  8. Exposure scenarios for workers

    NARCIS (Netherlands)

    Marquart, H.; Northage, C.; Money, C.

    2007-01-01

    The new European chemicals legislation REACH (Registration, Evaluation, Authorisation and restriction of Chemicals) requires the development of Exposure Scenarios describing the conditions and risk management measures needed for the safe use of chemicals. Such Exposure Scenarios should integrate

  9. Optimizing Aggregation Scenarios for Integrating Renewable Energy into the U.S. Electric Grid

    Science.gov (United States)

    Corcoran, B. A.; Jacobson, M. Z.

    2010-12-01

    This study is an analysis of 2006 and 2007 electric load data, wind speed and solar irradiance data, and existing hydroelectric, geothermal, and other power plant data to quantify benefits of aggregating clean electric power from various Federal Energy Regulatory Commission (FERC) regions in the contiguous United States. First, various time series, statistics, and probability methods are applied to the electric load data to determine if there are any desirable demand-side results—specifically reducing variability and/or coincidence of peak events, which could reduce the amount of required carbon-based generators—in combining the electricity demands from geographically and temporally diverse areas. Second, an optimization algorithm is applied to determine the least-cost portfolio of energy resources to meet the electric load for a range of renewable portfolio standards (RPS’s) for each FERC region and for various aggregation scenarios. Finally, the installed capacities, ramp rates, standard deviation, and corresponding generator requirements from these optimization test runs are compared against the transmission requirements to determine the most economical organizational structure of the contiguous U.S. electric grid. Ideally, results from this study will help to justify and identify a possible structure of a federal RPS and offer insight into how to best organize regions for transmission planning.

  10. Construct and face validity of the educational computer-based environment (ECE) assessment scenarios for basic endoneurosurgery skills.

    Science.gov (United States)

    Cagiltay, Nergiz Ercil; Ozcelik, Erol; Sengul, Gokhan; Berker, Mustafa

    2017-11-01

    In neurosurgery education, there is a paradigm shift from time-based training to criterion-based model for which competency and assessment becomes very critical. Even virtual reality simulators provide alternatives to improve education and assessment in neurosurgery programs and allow for several objective assessment measures, there are not many tools for assessing the overall performance of trainees. This study aims to develop and validate a tool for assessing the overall performance of participants in a simulation-based endoneurosurgery training environment. A training program was developed in two levels: endoscopy practice and beginning surgical practice based on four scenarios. Then, three experiments were conducted with three corresponding groups of participants (Experiment 1, 45 (32 beginners, 13 experienced), Experiment 2, 53 (40 beginners, 13 experienced), and Experiment 3, 26 (14 novices, 12 intermediate) participants). The results analyzed to understand the common factors among the performance measurements of these experiments. Then, a factor capable of assessing the overall skill levels of surgical residents was extracted. Afterwards, the proposed measure was tested to estimate the experience levels of the participants. Finally, the level of realism of these educational scenarios was assessed. The factor formed by time, distance, and accuracy on simulated tasks provided an overall performance indicator. The prediction correctness was very high for the beginners than the one for experienced surgeons in Experiments 1 and 2. When non-dominant hand is used in a surgical procedure-based scenario, skill levels of surgeons can be better predicted. The results indicate that the scenarios in Experiments 1 and 2 can be used as an assessment tool for the beginners, and scenario-2 in Experiment 3 can be used as an assessment tool for intermediate and novice levels. It can be concluded that forming the balance between perceived action capacities and skills is

  11. Development of integrated scenarios to attain the environmental aims of the national sustainability strategy; Entwicklung von integrierten Szenarien zur Erreichung der umweltbezogenen Ziele der Nationalen Nachhaltigkeitsstrategie

    Energy Technology Data Exchange (ETDEWEB)

    Fink, Alexander; Rammig, Hanna [ScMI AG Paderborn (Germany)

    2013-02-15

    The national sustainability strategy (NHS) shall significantly shape the direction of the sustainable development in Germany. It is aim of the project ''Development of integrated scenarios to attain the environmental aims of the national sustainability strategy'' to develop different options, of how to possibly approach the environmental aims of the national sustainability strategy. In a first step external scenarios were developed, which describe the national sustainability strategy. In a first step external scenarios were developed, which describe the external context for the embodiment of sustainability. In a second step, option scenarios which show alternatives for different actor groups were built for the three areas ''Leisure time, living and alimentation''. In a third step the combination of the different external scenarios and internal options has been conducted, how do the different solution areas fit to the external scenarios.

  12. Probabilistic Harmonic Analysis on Distributed Photovoltaic Integration Considering Typical Weather Scenarios

    Science.gov (United States)

    Bin, Che; Ruoying, Yu; Dongsheng, Dang; Xiangyan, Wang

    2017-05-01

    Distributed Generation (DG) integrating to the network would cause the harmonic pollution which would cause damages on electrical devices and affect the normal operation of power system. On the other hand, due to the randomness of the wind and solar irradiation, the output of DG is random, too, which leads to an uncertainty of the harmonic generated by the DG. Thus, probabilistic methods are needed to analyse the impacts of the DG integration. In this work we studied the harmonic voltage probabilistic distribution and the harmonic distortion in distributed network after the distributed photovoltaic (DPV) system integrating in different weather conditions, mainly the sunny day, cloudy day, rainy day and the snowy day. The probabilistic distribution function of the DPV output power in different typical weather conditions could be acquired via the parameter identification method of maximum likelihood estimation. The Monte-Carlo simulation method was adopted to calculate the probabilistic distribution of harmonic voltage content at different frequency orders as well as the harmonic distortion (THD) in typical weather conditions. The case study was based on the IEEE33 system and the results of harmonic voltage content probabilistic distribution as well as THD in typical weather conditions were compared.

  13. Assessing Regional Scale Variability in Extreme Value Statistics Under Altered Climate Scenarios

    Energy Technology Data Exchange (ETDEWEB)

    Brunsell, Nathaniel [Univ. of Kansas, Lawrence, KS (United States); Mechem, David [Univ. of Kansas, Lawrence, KS (United States); Ma, Chunsheng [Wichita State Univ., KS (United States)

    2015-02-20

    validity of an innovative multi–resolution information theory approach, and the ability of the RCM modeling framework to represent the low-frequency modulation of extreme climate events. Once the skill of the modeling and analysis methodology has been established, we will apply the same approach for the AR5 (IPCC Fifth Assessment Report) climate change scenarios in order to assess how climate extremes and the the influence of lowfrequency variability on climate extremes might vary under changing climate. The research specifically addresses the DOE focus area 2. Simulation of climate extremes under a changing climate. Specific results will include (1) a better understanding of the spatial and temporal structure of extreme events, (2) a thorough quantification of how extreme values are impacted by low-frequency climate teleconnections, (3) increased knowledge of current regional climate models ability to ascertain these influences, and (4) a detailed examination of the how the distribution of extreme events are likely to change under different climate change scenarios. In addition, this research will assess the ability of the innovative wavelet information theory approach to characterize extreme events. Any and all of these results will greatly enhance society’s ability to understand and mitigate the regional ramifications of future global climate change.

  14. Life cycle assessment of Italian citrus-based products. Sensitivity analysis and improvement scenarios.

    Science.gov (United States)

    Beccali, Marco; Cellura, Maurizio; Iudicello, Maria; Mistretta, Marina

    2010-07-01

    Though many studies concern the agro-food sector in the EU and Italy, and its environmental impacts, literature is quite lacking in works regarding LCA application on citrus products. This paper represents one of the first studies on the environmental impacts of citrus products in order to suggest feasible strategies and actions to improve their environmental performance. In particular, it is part of a research aimed to estimate environmental burdens associated with the production of the following citrus-based products: essential oil, natural juice and concentrated juice from oranges and lemons. The life cycle assessment of these products, published in a previous paper, had highlighted significant environmental issues in terms of energy consumption, associated CO(2) emissions, and water consumption. Starting from such results the authors carry out an improvement analysis of the assessed production system, whereby sustainable scenarios for saving water and energy are proposed to reduce environmental burdens of the examined production system. In addition, a sensitivity analysis to estimate the effects of the chosen methods will be performed, giving data on the outcome of the study. Uncertainty related to allocation methods, secondary data sources, and initial assumptions on cultivation, transport modes, and waste management is analysed. The results of the performed analyses allow stating that every assessed eco-profile is differently influenced by the uncertainty study. Different assumptions on initial data and methods showed very sensible variations in the energy and environmental performances of the final products. Besides, the results show energy and environmental benefits that clearly state the improvement of the products eco-profile, by reusing purified water use for irrigation, using the railway mode for the delivery of final products, when possible, and adopting efficient technologies, as the mechanical vapour recompression, in the pasteurisation and

  15. Quantitative assessment of integrated phrenic nerve activity.

    Science.gov (United States)

    Nichols, Nicole L; Mitchell, Gordon S

    2016-06-01

    Integrated electrical activity in the phrenic nerve is commonly used to assess within-animal changes in phrenic motor output. Because of concerns regarding the consistency of nerve recordings, activity is most often expressed as a percent change from baseline values. However, absolute values of nerve activity are necessary to assess the impact of neural injury or disease on phrenic motor output. To date, no systematic evaluations of the repeatability/reliability have been made among animals when phrenic recordings are performed by an experienced investigator using standardized methods. We performed a meta-analysis of studies reporting integrated phrenic nerve activity in many rat groups by the same experienced investigator; comparisons were made during baseline and maximal chemoreceptor stimulation in 14 wild-type Harlan and 14 Taconic Sprague Dawley groups, and in 3 pre-symptomatic and 11 end-stage SOD1(G93A) Taconic rat groups (an ALS model). Meta-analysis results indicate: (1) consistent measurements of integrated phrenic activity in each sub-strain of wild-type rats; (2) with bilateral nerve recordings, left-to-right integrated phrenic activity ratios are ∼1.0; and (3) consistently reduced activity in end-stage SOD1(G93A) rats. Thus, with appropriate precautions, integrated phrenic nerve activity enables robust, quantitative comparisons among nerves or experimental groups, including differences caused by neuromuscular disease. Copyright © 2015 Elsevier B.V. All rights reserved.

  16. The use of scenarios as the basis for combined assessment of climate change mitigation and adaptation

    NARCIS (Netherlands)

    van Vuuren, D.P.; Isaac, M.; Kundzewicz, Z.W.; Arnell, N.; Barker, T.; Criqui, P.; Berkhout, F.; Hilderink, H.; Hinkel, J.; Hof, Andries; Kitous, A.; Kram, T.; Mechler, R.; Scrieciu, S.

    2011-01-01

    Scenarios are used to explore the consequences of different adaptation and mitigation strategies under uncertainty. In this paper, two scenarios are used to explore developments with (1) no mitigation leading to an increase of global mean temperature of 4 °C by 2100 and (2) an ambitious mitigation

  17. Structural integrity assessment of piping components

    International Nuclear Information System (INIS)

    Kushwaha, H.S.; Chattopadhyay, J.

    2008-01-01

    Integrity assessment of piping components is very essential for safe and reliable operation of power plants. Over the last several decades, considerable work has been done throughout the world to develop a methodology for integrity assessment of pipes and elbows, appropriate for the material involved. However, there is scope of further development/improvement of issues, particularly for pipe bends, that are important for accurate integrity assessment of piping. Considering this aspect, a comprehensive Component Integrity Test Program was initiated in 1998 at Bhabha Atomic Research Centre (BARC), India. In this program, both theoretical and experimental investigations were undertaken to address various issues related to the integrity assessment of pipes and elbows. Under the experimental investigations, fracture mechanics tests have been conducted on pipes and elbows of 200-400 mm nominal bore (NB) diameter with various crack configurations and sizes under different loading conditions. Tests on small tensile and three point bend specimens, machined from the tested pipes, have also been done to evaluate the actual stress-strain and fracture resistance properties of pipe/elbow material. The load-deflection curve and crack initiation loads predicted by non-linear finite element analysis matched well with the experimental results. The theoretical collapse moments of throughwall circumferentially cracked elbows, predicted by the recently developed equations, are found to be closer to the test data compared to the other existing equations. The role of stress triaxialities ahead of crack tip is also shown in the transferability of J-Resistance curve from specimen to component. The cyclic loading and system compliance effect on the load carrying capacity of piping components are investigated and new recommendations are made. (author)

  18. IkusaSA. Integrated Assessment for Sustainability

    CSIR Research Space (South Africa)

    Scholes, RJ

    2012-10-01

    Full Text Available , have intended and unintended consequences across a range of important issues. The IkusaSA model system comprises: ? A South African national IAM nested within one or more ?state-of-the-art? global IAMs that predict trade, climate change and human... the country and internationally. The IkusaSA mission is to establish Integrated Assessment Modeling (IAM) in South Africa. The goal is to put in place the tools for an integrated planning approach and provide effective information sharing mechanisms...

  19. A global assessment of gross and net land change dynamics for current conditions and future scenarios

    Directory of Open Access Journals (Sweden)

    R. Fuchs

    2018-05-01

    Full Text Available The consideration of gross land changes, meaning all area gains and losses within a pixel or administrative unit (e.g. country, plays an essential role in the estimation of total land changes. Gross land changes affect the magnitude of total land changes, which feeds back to the attribution of biogeochemical and biophysical processes related to climate change in Earth system models. Global empirical studies on gross land changes are currently lacking. Whilst the relevance of gross changes for global change has been indicated in the literature, it is not accounted for in future land change scenarios. In this study, we extract gross and net land change dynamics from large-scale and high-resolution (30–100 m remote sensing products to create a new global gross and net change dataset. Subsequently, we developed an approach to integrate our empirically derived gross and net changes with the results of future simulation models by accounting for the gross and net change addressed by the land use model and the gross and net change that is below the resolution of modelling. Based on our empirical data, we found that gross land change within 0.5° grid cells was substantially larger than net changes in all parts of the world. As 0.5° grid cells are a standard resolution of Earth system models, this leads to an underestimation of the amount of change. This finding contradicts earlier studies, which assumed gross land changes to appear in shifting cultivation areas only. Applied in a future scenario, the consideration of gross land changes led to approximately 50 % more land changes globally compared to a net land change representation. Gross land changes were most important in heterogeneous land systems with multiple land uses (e.g. shifting cultivation, smallholder farming, and agro-forestry systems. Moreover, the importance of gross changes decreased over time due to further polarization and intensification of land use. Our results serve as

  20. Analysis of multiple failure accident scenarios for development of probabilistic safety assessment model for KALIMER-600

    International Nuclear Information System (INIS)

    Kim, T.W.; Suk, S.D.; Chang, W.P.; Kwon, Y.M.; Jeong, H.Y.; Lee, Y.B.; Ha, K.S.; Kim, S.J.

    2009-01-01

    A sodium-cooled fast reactor (SFR), KALIMER-600, is under development at KAERI. Its fuel is the metal fuel of U-TRU-Zr and it uses sodium as coolant. Its advantages are found in the aspects of an excellent uranium resource utilization, inherent safety features, and nonproliferation. The probabilistic safety assessment (PSA) will be one of the initiating subjects for designing it from the aspects of a risk informed design (RID) as well as a technology-neutral licensing (TNL). The core damage is defined as coolant voiding, fuel melting, or cladding damage. Accident scenarios which lead to the core damage should be identified for the development of a Level-1 PSA model. The SSC-K computer code is used to identify the conditions which lead to core damage. KALIMER-600 has passive safety features such as passive shutdown functions, passive pump coast-down features, and passive decay heat removal systems. It has inherent reactivity feedback effects such as Doppler, sodium void, core axial expansion, control rod axial expansion, core radial expansion, etc. The accidents which are analyzed are the multiple failure accidents such as an unprotected transient overpower, a loss of flow, and a loss of heat sink events with degraded safety systems or functions. The safety functions to be considered here are a reactor trip, inherent reactivity feedback features, the pump coast-down, and the passive decay heat removal. (author)

  1. Fabric-skin models to assess infection transfer for impetigo contagiosa in a kindergarten scenario.

    Science.gov (United States)

    Gerhardts, A; Henze, S V; Bockmühl, D; Höfer, D

    2015-06-01

    Children in community bodies like kindergartens are predisposed to suffer from impetigo. To consider important measures for infection prevention, direct and indirect transmission routes of pathogens must be revealed. Therefore, we studied the role of skin and fabrics in the spread of the impetigo pathogen Staphylococcus aureus and the strain Streptococcus equi (surrogate to Streptococcus pyogenes) in order to assess infection transfer in realistic scenarios. The transmission of test strains was studied with standardized fabric-skin models using a technical artificial skin and fabrics of different fiber types commonly occurring in German kindergartens. In synthetic pus, both test strains persisted on artificial skin and fabrics for at least 4 h. Friction enhanced transfer, depending on the fiber type or fabric construction. In a skin-to-skin setup, the total transfer was higher than via fabrics and no decrease in the transmission rates from donor to recipients could be observed after successive direct skin contacts. Children in kindergartens may be at risk of transmission for impetigo pathogens, especially via direct skin contact, but also by the joint use of fabrics, like towels or handicraft materials. Fabric-skin models used in this study enable further insight into the transmission factors for skin infections on the basis of a practical approach.

  2. Comparative assessment of the European and Latin American scenarios for NORM/TENORM exposure

    International Nuclear Information System (INIS)

    Steinhaeusler, F.; Paschoa, A.S.

    2002-01-01

    The geological formation of the areas of high natural radioactivity are usually associated with mineral ores commercially important. As a consequence, extracting industries are installed in or near those areas. Several industrial products and byproducts can be obtained from thorium, uranium and potassium rich mineral ores, for example: niobium concentrate from pyrochlore; monazite, ilmenite, rutile and zirconite concentrates from monazite sands; phosphate fertilizers from apatite; tin and lead from cassiterite; gold and copper form a variety of thorium and uranium rich mineral matrices. Other industries like oil- and natural gas production and processing, production of thoriated tungsten lamps, welding, gas mantles and pigments produce non-negligible amounts of wastes containing technologically enhanced naturally occurring radioactive materials (TENORM). In addition, quite frequently unknown amounts of natural radionuclides end up embedded in a variety of consumer products. Thus, naturally occurring radioactive materials (NORM) as well as TENORM in consumer products and/or industrial wastes may be of importance as far as human exposures are concerned. This work will present a comparative assessment of the radiological significance of different NORM/TENORM exposure scenarios in Europe and Latin America. (author)

  3. Assessment and comparison of total RF-EMF exposure in femtocell and macrocell base station scenarios.

    Science.gov (United States)

    Aerts, Sam; Plets, David; Verloock, Leen; Martens, Luc; Joseph, Wout

    2014-12-01

    The indoor coverage of a mobile service can be drastically improved by deployment of an indoor femtocell base station (FBS). However, the impact of its proximity on the total exposure of the human body to radio-frequency (RF) electromagnetic fields (EMFs) is unknown. Using a framework designed for the combination of near-field and far-field exposure, the authors assessed and compared the RF-EMF exposure of a mobile-phone (MP) user that is either connected to an FBS or a conventional macrocell base station while in an office environment. It is found that, in average macrocell coverage and MP use-time conditions and for Universal Mobile Telecommunications System technology, the total exposure can be reduced by a factor of 20-40 by using an FBS, mostly due to the significant decrease in the output power of the MP. In general, the framework presented in this study can be used for any exposure scenario, featuring any number of technologies, base stations and/or access points, users and duration. © The Author 2013. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

  4. Women's Drinking Decisions in Heterosocial Situations: Development and Validation of Scenarios to Assess Influence of Attraction and Risk-Awareness.

    Science.gov (United States)

    Noel, Nora E; Ogle, Richard L; Maisto, Stephen A; Jackson, Lee A; Loomis, Randi B; Heaton, Jennifer A

    2016-07-01

    These three related studies created a set of ecologically valid scenarios for assessing relative associations of both attraction and sexual coercion risk-recognition in college women's heterosocial situational drinking decisions. The first study constructed nine scenarios using input from heterosexual drinking women in the age cohort (18-30) most likely to experience alcohol-related sexual coercion. In the second study, 50 female undergraduates (ages 18-25) assessed the salience of three important dimensions (attraction, risk, and realism) in these scenarios. The third study was a factor analysis (and a follow-up confirmatory factor analysis) of the elements of coercion-risk as perceived by the target group with two female samples recruited 1 year apart (Sample 1: N = 157, ages 18-29); Sample 2: N = 157, ages 18-30). Results confirmed that the scenarios could be a useful vehicle for assessing how women balance out risk and attraction to make in-the moment heterosocial drinking decisions. The factor analysis showed participants perceived two types of situations, based on whether the male character was "Familiar" or "Just Met" and perceived themselves as happier and more excited with Familiar males. However, in contrast to HIV risk studies, Familiar males were perceived as higher risk for unwanted sex. Future research will use the six scenarios that emerged from the factor analysis to study how attraction and risk perception differentially affect young adult women's social drinking decisions.

  5. Integrating Collaboration, Adaptive Management, and Scenario-Planning: Experiences at Las Cienegas National Conservation Area

    Directory of Open Access Journals (Sweden)

    Jeremy K. Caves

    2013-09-01

    response to climate change, and (2 incorporating scenario planning into CAM to explore how climate change may interact with other drivers and alter options for the future, to identify robust management actions, and to prioritize ecological monitoring efforts. The experiences at LCNCA demonstrate how collaboration and adaptive management can be used to improve social and environmental outcomes and, with modifications, may help address the full range of complexity and change that threatens to overwhelm even the best efforts to sustain public lands.

  6. Development of Integrated Real-Time Control of Internal Transport Barriers in Advanced Operation Scenarios on JET

    International Nuclear Information System (INIS)

    Moreau, D.; Crisanti, F.; Laborde, L.

    2005-01-01

    An important experimental programme is in progress on JET to investigate plasma control schemes which, with a limited number of actuators, could eventually enable ITER to sustain steady state burning plasmas in an 'advanced tokamak' operation scenario. A multi-variable model-based technique was recently developed for the simultaneous control of several plasma parameter profiles in discharges with internal transport barriers (ITB), using lower hybrid current drive (LHCD) together with neutral beam injection (NBI) and ion cyclotron resonance heating (ICRH). The proposed distributed-parameter control scheme relies on the experimental identification of an integral linear response model operator and retains the intrinsic couplings between the plasma parameter profiles. A first set of experiments was performed to control the current density profile in the low-density/low-power LH-driven phase of the JET advanced scenarios, using only one actuator (LHCD) and a simplified (lumped-parameter) version of the control scheme. Several requested steady state magnetic equilibria were thus obtained and sustained for about 7s, up to full relaxation of the ohmic current throughout the plasma. A second set of experiments was dedicated to the control of the q-profile with 3 actuators (LHCD, NBI and ICRH) during the intense heating phase of advanced scenarios. The safety factor profile was also shown to approach a requested profile within about 5s. The achieved plasma equilibrium was close to steady state. Finally, during the recent high power experimental campaign, experiments have been conducted in a 3T/1.7MA plasma, achieving the simultaneous control of the current density and electron temperature profiles in ITB plasmas. Here, the distributed-parameter version of the algorithm was used for the first time, again with 3 actuators. Real-time control was applied during 7s, and allowed to reach successfully different target q-profiles (monotonic and reversed-shear ones) and different ITB

  7. Development of integrated real-time control of internal transport barriers in advanced operation scenarios on Jet

    Energy Technology Data Exchange (ETDEWEB)

    Moreau, D.; Laborde, L.; Litaudon, X.; Mazon, D.; Zabeo, L.; Joffrin, E.; Lennholm, M. [Association Euratom-CEA, Centre d' Etudes de Cadarache, 13 - Saint-Paul-lez-Durance (France). Dept. de Recherches sur la Fusion Controlee; Moreau, D. [EFDA-JET CSU, Culham Science Centre, Abingdon, OX (United Kingdom); Crisanti, F.; Pericoli-Ridolfini, V.; Riva, M.; Tuccillo, A. [Euratom-ENEA Association, C.R. Frascati (Italy); Murari, A. [Euratom-ENEA Association, Consorzio RFX, Padova (Italy); Tala, T. [Euratom-TEKES Association, VTT Processes (Finland); Albanese, R.; Ariola, M.; Tommasi, G. de; Pironti, A. [Euratom-ENEA Association, CREATE, Napoli (Italy); Felton, R.; Zastrow, K.D. [Euratom-UKAEA Association, Culham Science Centre, Abingdon(United Kingdom); Baar, M. de; Vries, P. de [Euratom-FOM Association, TEC Cluster, Nieuwegein (Netherlands); La Luna, E. de [Euratom-CIEMAT Association, CIEMAT, Madrid (Spain)

    2004-07-01

    An important experimental programme is in progress on JET to investigate plasma control schemes which, with a limited number of actuators, could eventually enable ITER to sustain steady state burning plasmas in an 'advanced tokamak' operation scenario. A multi-variable model-based technique was recently developed for the simultaneous control of several plasma parameter profiles in discharges with internal transport barriers (ITB), using lower hybrid current drive (LHCD) together with neutral beam injection (NBI) and ion cyclotron resonance heating (ICRH). The proposed distributed-parameter control scheme relies on the experimental identification of an integral linear response model operator and retains the intrinsic couplings between the plasma parameter profiles. A first set of experiments was performed to control the current density profile in the low-density/low-power LH-driven phase of the JET advanced scenarios, using only one actuator (LHCD) and a simplified (lumped-parameter) version of the control scheme. Several requested steady state magnetic equilibria were thus obtained and sustained for about 7 s, up to full relaxation of the ohmic current throughout the plasma. A second set of experiments was dedicated to the control of the q-profile with 3 actuators (LHCD, NBI and ICRH) during the intense heating phase of advanced scenarios. The safety factor profile was also shown to approach a requested profile within about 5 s. The achieved plasma equilibrium was close to steady state. Finally, during the recent high power experimental campaign, experiments have been conducted in a 3 T / 1.7 MA plasma, achieving the simultaneous control of the current density and electron temperature profiles in ITB plasmas. Here, the distributed-parameter version of the algorithm was used for the first time, again with 3 actuators. Real-time control was applied during 7 s, and allowed to reach successfully different target q-profiles (monotonic and reversed-shear ones

  8. Development of integrated real-time control of internal transport barriers in advanced operation scenarios on Jet

    International Nuclear Information System (INIS)

    Moreau, D.; Laborde, L.; Litaudon, X.; Mazon, D.; Zabeo, L.; Joffrin, E.; Lennholm, M.; Crisanti, F.; Pericoli-Ridolfini, V.; Riva, M.; Tuccillo, A.; Murari, A.; Tala, T.; Albanese, R.; Ariola, M.; Tommasi, G. de; Pironti, A.; Felton, R.; Zastrow, K.D.; Baar, M. de; Vries, P. de; La Luna, E. de

    2004-01-01

    An important experimental programme is in progress on JET to investigate plasma control schemes which, with a limited number of actuators, could eventually enable ITER to sustain steady state burning plasmas in an 'advanced tokamak' operation scenario. A multi-variable model-based technique was recently developed for the simultaneous control of several plasma parameter profiles in discharges with internal transport barriers (ITB), using lower hybrid current drive (LHCD) together with neutral beam injection (NBI) and ion cyclotron resonance heating (ICRH). The proposed distributed-parameter control scheme relies on the experimental identification of an integral linear response model operator and retains the intrinsic couplings between the plasma parameter profiles. A first set of experiments was performed to control the current density profile in the low-density/low-power LH-driven phase of the JET advanced scenarios, using only one actuator (LHCD) and a simplified (lumped-parameter) version of the control scheme. Several requested steady state magnetic equilibria were thus obtained and sustained for about 7 s, up to full relaxation of the ohmic current throughout the plasma. A second set of experiments was dedicated to the control of the q-profile with 3 actuators (LHCD, NBI and ICRH) during the intense heating phase of advanced scenarios. The safety factor profile was also shown to approach a requested profile within about 5 s. The achieved plasma equilibrium was close to steady state. Finally, during the recent high power experimental campaign, experiments have been conducted in a 3 T / 1.7 MA plasma, achieving the simultaneous control of the current density and electron temperature profiles in ITB plasmas. Here, the distributed-parameter version of the algorithm was used for the first time, again with 3 actuators. Real-time control was applied during 7 s, and allowed to reach successfully different target q-profiles (monotonic and reversed-shear ones) and

  9. Broadband Ground Motion Simulation Recipe for Scenario Hazard Assessment in Japan

    Science.gov (United States)

    Koketsu, K.; Fujiwara, H.; Irikura, K.

    2014-12-01

    codes using ground motions from the 2005 Fukuoka earthquake. Irikura and Miyake (2011) summarized the latter validations, concluding that the ground motions were successfully simulated as shown in the figure. This indicates that the recipe has enough potential to generate broadband ground motions for scenario hazard assessment in Japan.

  10. Integrated Climate Change Impacts Assessment in California

    Science.gov (United States)

    Cayan, D. R.; Franco, G.; Meyer, R.; Anderson, M.; Bromirski, P. D.

    2014-12-01

    This paper summarizes lessons learned from an ongoing series of climate change assessments for California, conducted by the scientific community and State and local agencies. A series of three Assessments have considered vulnerability and adaptation issues for both managed and natural systems. California's vulnerability is many faceted, arising because of an exceptionally drought prone climate, open coast and large estuary exposure to sea level rise, sensitive ecosystems and complex human footprint and economy. Key elements of the assessments have been a common set of climate and sea-level rise scenarios, based upon IPCC GCM simulations. Regionalized and localized output from GCM projections was provided to research teams investigating water supply, agriculture, coastal resources, ecosystem services, forestry, public health, and energy demand and hydropower generation. The assessment results are helping to investigate the broad range of uncertainty that is inherent in climate projections, and users are becoming better equipped to process an envelope of potential climate and impacts. Some projections suggest that without changes in California's present fresh-water delivery system, serious water shortages would take place, but that technical solutions are possible. Under a warmer climate, wildfire vulnerability is heightened markedly in some areas--estimated increases in burned area by the end of the 21st Century exceed 100% of the historical area burned in much of the forested areas of Northern California Along California coast and estuaries, projected rise in mean sea level will accelerate flooding occurrences, prompting the need for better education and preparedness. Many policymakers and agency personnel in California are factoring in results from the assessments and recognize the need for a sustained assessment process. An ongoing challenge, of course, is to achieve more engagement with a broader community of decision makers, and notably with the private sector.

  11. Mobility, Context and Cloud – Exploring Integration Issues in a Meeting Room Scenario

    Directory of Open Access Journals (Sweden)

    Tor-Morten Grønli

    2012-04-01

    Full Text Available In this paper we pursue the context-aware paradigm in a distributed mobile environment. Context-awareness plays a significant role in the domain of implicit human computer interaction and we present an intelligent context-aware meeting room application. The distributed mobile application consists of multiple mobile operating system clients, a Google Android based presenter that, through proximity technology, communicates with a server in the meeting room, and a Google Cloud backend server. Over 40 users have evaluated the application. Results show that the context aware meeting room was well received by users who displayed a strong positive bias towards cloud integration and, in particular, automatic meeting-note push. We conclude that our context-aware meeting assistant can provide valuable assistance to end users and that there is promise for such use of heterogeneous mobile context-aware platforms.

  12. Environmental influences on mate preferences as assessed by a scenario manipulation experiment.

    Science.gov (United States)

    Marzoli, Daniele; Moretto, Francesco; Monti, Aura; Tocci, Ornella; Roberts, S Craig; Tommasi, Luca

    2013-01-01

    Many evolutionary psychology studies have addressed the topic of mate preferences, focusing particularly on gender and cultural differences. However, the extent to which situational and environmental variables might affect mate preferences has been comparatively neglected. We tested 288 participants in order to investigate the perceived relative importance of six traits of an ideal partner (wealth, dominance, intelligence, height, kindness, attractiveness) under four different hypothetical scenarios (status quo/nowadays, violence/post-nuclear, poverty/resource exhaustion, prosperity/global well-being). An equal number of participants (36 women, 36 men) was allotted to each scenario; each was asked to allocate 120 points across the six traits according to their perceived value. Overall, intelligence was the trait to which participants assigned most importance, followed by kindness and attractiveness, and then by wealth, dominance and height. Men appraised attractiveness as more valuable than women. Scenario strongly influenced the relative importance attributed to traits, the main finding being that wealth and dominance were more valued in the poverty and post-nuclear scenarios, respectively, compared to the other scenarios. Scenario manipulation generally had similar effects in both sexes, but women appeared particularly prone to trade off other traits for dominance in the violence scenario, and men particularly prone to trade off other traits for wealth in the poverty scenario. Our results are in line with other correlational studies of situational variables and mate preferences, and represent strong evidence of a causal relationship of environmental factors on specific mate preferences, corroborating the notion of an evolved plasticity to current ecological conditions. A control experiment seems to suggest that our scenarios can be considered as realistic descriptions of the intended ecological conditions.

  13. Environmental influences on mate preferences as assessed by a scenario manipulation experiment.

    Directory of Open Access Journals (Sweden)

    Daniele Marzoli

    Full Text Available Many evolutionary psychology studies have addressed the topic of mate preferences, focusing particularly on gender and cultural differences. However, the extent to which situational and environmental variables might affect mate preferences has been comparatively neglected. We tested 288 participants in order to investigate the perceived relative importance of six traits of an ideal partner (wealth, dominance, intelligence, height, kindness, attractiveness under four different hypothetical scenarios (status quo/nowadays, violence/post-nuclear, poverty/resource exhaustion, prosperity/global well-being. An equal number of participants (36 women, 36 men was allotted to each scenario; each was asked to allocate 120 points across the six traits according to their perceived value. Overall, intelligence was the trait to which participants assigned most importance, followed by kindness and attractiveness, and then by wealth, dominance and height. Men appraised attractiveness as more valuable than women. Scenario strongly influenced the relative importance attributed to traits, the main finding being that wealth and dominance were more valued in the poverty and post-nuclear scenarios, respectively, compared to the other scenarios. Scenario manipulation generally had similar effects in both sexes, but women appeared particularly prone to trade off other traits for dominance in the violence scenario, and men particularly prone to trade off other traits for wealth in the poverty scenario. Our results are in line with other correlational studies of situational variables and mate preferences, and represent strong evidence of a causal relationship of environmental factors on specific mate preferences, corroborating the notion of an evolved plasticity to current ecological conditions. A control experiment seems to suggest that our scenarios can be considered as realistic descriptions of the intended ecological conditions.

  14. Integrated deterministic and probabilistic safety assessment: Concepts, challenges, research directions

    International Nuclear Information System (INIS)

    Zio, Enrico

    2014-01-01

    Highlights: • IDPSA contributes to robust risk-informed decision making in nuclear safety. • IDPSA considers time-dependent interactions among component failures and system process. • Also, IDPSA considers time-dependent interactions among control and operator actions. • Computational efficiency by advanced Monte Carlo and meta-modelling simulations. • Efficient post-processing of IDPSA output by clustering and data mining. - Abstract: Integrated deterministic and probabilistic safety assessment (IDPSA) is conceived as a way to analyze the evolution of accident scenarios in complex dynamic systems, like nuclear, aerospace and process ones, accounting for the mutual interactions between the failure and recovery of system components, the evolving physical processes, the control and operator actions, the software and firmware. In spite of the potential offered by IDPSA, several challenges need to be effectively addressed for its development and practical deployment. In this paper, we give an overview of these and discuss the related implications in terms of research perspectives

  15. Integrated deterministic and probabilistic safety assessment: Concepts, challenges, research directions

    Energy Technology Data Exchange (ETDEWEB)

    Zio, Enrico, E-mail: enrico.zio@ecp.fr [Ecole Centrale Paris and Supelec, Chair on System Science and the Energetic Challenge, European Foundation for New Energy – Electricite de France (EDF), Grande Voie des Vignes, 92295 Chatenay-Malabry Cedex (France); Dipartimento di Energia, Politecnico di Milano, Via Ponzio 34/3, 20133 Milano (Italy)

    2014-12-15

    Highlights: • IDPSA contributes to robust risk-informed decision making in nuclear safety. • IDPSA considers time-dependent interactions among component failures and system process. • Also, IDPSA considers time-dependent interactions among control and operator actions. • Computational efficiency by advanced Monte Carlo and meta-modelling simulations. • Efficient post-processing of IDPSA output by clustering and data mining. - Abstract: Integrated deterministic and probabilistic safety assessment (IDPSA) is conceived as a way to analyze the evolution of accident scenarios in complex dynamic systems, like nuclear, aerospace and process ones, accounting for the mutual interactions between the failure and recovery of system components, the evolving physical processes, the control and operator actions, the software and firmware. In spite of the potential offered by IDPSA, several challenges need to be effectively addressed for its development and practical deployment. In this paper, we give an overview of these and discuss the related implications in terms of research perspectives.

  16. Identification of scenarios in the safety assessment of a deep geological site for radioactive waste disposal

    International Nuclear Information System (INIS)

    Escalier des Orres, P.; Devillers, C.; Cernes, A.

    1990-01-01

    The selection and qualification procedure of a site for radioactive wastes disposal in a deep geologic formation, has begun in France in the early eighties. The public authorities, on ANDRA's proposal, has preselected in 1987 four sites, each of them corresponding to a type of geologic formations (granite, clay, salt and shale). Within two years, one of these sites will be chosen for the location of an underground laboratory. The safety analysis for the site's qualification uses evolution scenarios of the repository and its environment, chosen according to a deterministic method. With an appropriate detail level, are defined a reference scenario and scenario with random events. 4 refs., 1 tab [fr

  17. Assessing hydrological drought risk for the irrigation sector in future climate scenarios: lessons learned from the Apulia case study (Italy)

    Science.gov (United States)

    Critto, Andrea; Torresan, Silvia; Ronco, Paolo; Zennaro, Federica; Santini, Monia; Trabucco, Antonio; Marcomini, Antonio

    2016-04-01

    Climate change is already affecting the frequency of drought events which may threaten the current stocks of water resources and thus the availability of freshwater for the irrigation. The achievement of a sustainable equilibrium between the availability of water resources and the irrigation demand is essentially related to the planning and implementation of evidence-based adaptation strategies and actions. In this sense, the improvement (of existing) and the development of (new) appropriate risk assessment methods and tools to evaluate the impact of drought events on irrigated crops is fundamental in order to assure that the agricultural yields are appropriate to meet the current and future food and market demand. This study evaluates the risk of hydrological drought on the irrigated agronomic compartment of Apulia, a semi-arid region in Southern Italy. We applied a stepwise Regional Risk Assessment (RRA) procedure, based on the consecutive analysis of hazards, exposure, vulnerability and risks, integrating the qualitative and quantitative available information. Future climate projections for the timeframes 2021-2050 and 2041-2070 were provided by COSMO-CLM under the radiative forcing RCP4.5 and RCP8.5. The run-off feeding the water stocks of the most important irrigation reservoirs in Apulia was then modeled with Arc-SWAT. Hence, the hazard analysis was carried out in order to estimate the degree of fulfillment of actual irrigation demand satisfied by water supply of different reservoirs in future scenarios. Vulnerability of exposed irrigated crops was evaluated depending on three factors accounting for crop yield variation vs water stress, water losses along the irrigation network, diversification of water supply. Resulting risk and vulnerability maps allowed: the identification of Reclamation Consortia at higher risk of not fulfilling their future irrigation demand (e.g. Capitanata Reclamation Consortia in RCP8.5 2041-2070 scenario); the ranking of most

  18. Estimating insured residential losses from large flood scenarios on the Tone River, Japan – a data integration approach

    Directory of Open Access Journals (Sweden)

    T. Okada

    2011-12-01

    Full Text Available Flooding on the Tone River, which drains the largest catchment area in Japan and is now home to 12 million people, poses significant risk to the Greater Tokyo Area. In April 2010, an expert panel in Japan, the Central Disaster Prevention Council, examined the potential for large-scale flooding and outlined possible mitigation measures in the Greater Tokyo Area. One of the scenarios considered closely mimics the pattern of flooding that occurred with the passage of Typhoon Kathleen in 1947 and would potentially flood some 680 000 households above floor level. Building upon that report, this study presents a Geographical Information System (GIS-based data integration approach to estimate the insurance losses for residential buildings and contents as just one component of the potential financial cost. Using a range of publicly available data – census information, location reference data, insurance market information and flood water elevation data – this analysis finds that insurance losses for residential property alone could reach approximately 1 trillion JPY (US$ 12.5 billion. Total insurance losses, including commercial and industrial lines of business, are likely to be at least double this figure with total economic costs being much greater again. The results are sensitive to the flood scenario assumed, position of levee failures, local flood depths and extents, population and building heights. The Average Recurrence Interval (ARI of the rainfall following Typhoon Kathleen has been estimated to be on the order of 200 yr; however, at this juncture it is not possible to put an ARI on the modelled loss since we cannot know the relative or joint probability of the different flooding scenarios. It is possible that more than one of these scenarios could occur simultaneously or that levee failure at one point might lower water levels downstream and avoid a failure at all other points. In addition to insurance applications, spatial analyses like

  19. Integrated doses calculation in evacuation scenarios of the neutron generator facility at Missouri S&T

    Energy Technology Data Exchange (ETDEWEB)

    Sharma, Manish K.; Alajo, Ayodeji B., E-mail: alajoa@mst.edu

    2016-08-11

    Any source of ionizing radiations could lead to considerable dose acquisition to individuals in a nuclear facility. Evacuation may be required when elevated levels of radiation is detected within a facility. In this situation, individuals are more likely to take the closest exit. This may not be the most expedient decision as it may lead to higher dose acquisition. The strategy followed in preventing large dose acquisitions should be predicated on the path that offers least dose acquisition. In this work, the neutron generator facility at Missouri University of Science and Technology was analyzed. The Monte Carlo N-Particle (MCNP) radiation transport code was used to model the entire floor of the generator's building. The simulated dose rates in the hallways were used to estimate the integrated doses for different paths leading to exits. It was shown that shortest path did not always lead to minimum dose acquisition and the approach was successful in predicting the expedient path as opposed to the approach of taking the nearest exit.

  20. Exposure Scenarios and Unit Dose Factors for the Hanford Immobilized Low Activity Tank Waste Performance Assessment

    Energy Technology Data Exchange (ETDEWEB)

    RITTMANN, P.D.

    1999-12-29

    Exposure scenarios are defined to identify potential pathways and combinations of pathways that could lead to radiation exposure from immobilized tank waste. Appropriate data and models are selected to permit calculation of dose factors for each exposure

  1. Assessment and modeling of inductive and non-inductive scenarios for ITER

    International Nuclear Information System (INIS)

    Boucher, D.; Vayakis, G.; Moreau, D.

    1999-01-01

    This paper presents recent developments in modeling and simulations of ITER performances and scenarios. The first part presents an improved modeling of coupled divertor/main plasma operation including the simulation of the measurements involved in the control loop. The second part explores the fusion performances predicted under non-inductive operation with internal transport barrier. The final part covers a detailed scenario for non-inductive operation using a reverse shear configuration with lower hybrid and fast wave current drive. (author)

  2. An Event-Based Approach to Design a Teamwork Training Scenario and Assessment Tool in Surgery.

    Science.gov (United States)

    Nguyen, Ngan; Watson, William D; Dominguez, Edward

    2016-01-01

    Simulation is a technique recommended for teaching and measuring teamwork, but few published methodologies are available on how best to design simulation for teamwork training in surgery and health care in general. The purpose of this article is to describe a general methodology, called event-based approach to training (EBAT), to guide the design of simulation for teamwork training and discuss its application to surgery. The EBAT methodology draws on the science of training by systematically introducing training exercise events that are linked to training requirements (i.e., competencies being trained and learning objectives) and performance assessment. The EBAT process involves: Of the 4 teamwork competencies endorsed by the Agency for Healthcare Research Quality and Department of Defense, "communication" was chosen to be the focus of our training efforts. A total of 5 learning objectives were defined based on 5 validated teamwork and communication techniques. Diagnostic laparoscopy was chosen as the clinical context to frame the training scenario, and 29 KSAs were defined based on review of published literature on patient safety and input from subject matter experts. Critical events included those that correspond to a specific phase in the normal flow of a surgical procedure as well as clinical events that may occur when performing the operation. Similar to the targeted KSAs, targeted responses to the critical events were developed based on existing literature and gathering input from content experts. Finally, a 29-item EBAT-derived checklist was created to assess communication performance. Like any instructional tool, simulation is only effective if it is designed and implemented appropriately. It is recognized that the effectiveness of simulation depends on whether (1) it is built upon a theoretical framework, (2) it uses preplanned structured exercises or events to allow learners the opportunity to exhibit the targeted KSAs, (3) it assesses performance, and (4

  3. Fuel pin integrity assessment under large scale transients

    International Nuclear Information System (INIS)

    Dutta, B.K.

    2006-01-01

    The integrity of fuel rods under normal, abnormal and accident conditions is an important consideration during fuel design of advanced nuclear reactors. The fuel matrix and the sheath form the first barrier to prevent the release of radioactive materials into the primary coolant. An understanding of the fuel and clad behaviour under different reactor conditions, particularly under the beyond-design-basis accident scenario leading to large scale transients, is always desirable to assess the inherent safety margins in fuel pin design and to plan for the mitigation the consequences of accidents, if any. The severe accident conditions are typically characterized by the energy deposition rates far exceeding the heat removal capability of the reactor coolant system. This may lead to the clad failure due to fission gas pressure at high temperature, large- scale pellet-clad interaction and clad melting. The fuel rod performance is affected by many interdependent complex phenomena involving extremely complex material behaviour. The versatile experimental database available in this area has led to the development of powerful analytical tools to characterize fuel under extreme scenarios

  4. Assessments of long-term effects of CO2 and 14C: Various energy scenarios

    International Nuclear Information System (INIS)

    Matthies, M.; Paretzke, H.G.

    1982-01-01

    A non-linear model for the global carbon cycle has been developed and applied for prognostic assessment of concentrations of CO 2 from the combustion of fossil fuel and of radiocarbon released from facilities of the nuclear fuel cycle. The model is built up from two boxes for the atmosphere (stratosphere, troposphere), three boxes for the ocean (mixed surface layer, deep sea and sediments), and two boxes for the biosphere (short-and long-lived biota) with non-linear troposphere-biota and troposphere-ocean surface layer exchange rates and linear fluxes between the other reservoirs. Two different models are used for the man-made reduction of the biomass: (a) no deforestation function, and (b) slightly growing deforestation function. The three scenarios considered are: (I) annual energy growth rates of 2% and 4%, no nuclear power; (II) an upper, lower and medium estimate of replacement of fossil fuels by nuclear power. In addition, two assumptions concerning the decontamination of 14 C in the nuclear power plant effluents were made: one in which 14 C is released completely, and one with a decontamination factor of 4. Assuming logistic source functions for the increase of fossil-fuel combustion and an exponential growth of nuclear power until the year 2020, by around 2100 the CO 2 concentration of the troposphere will reach concentrations twice to five times as high as the pre-industrial level. Various environmental effects of this increasing CO 2 level are briefly discussed. The specific 14 C activity of the atmosphere is decreased. Up to the year 2200, the specific activity will be lower than the pre-industrial level. The individual lifetime dose commitments (70 years) are found between 0.85 and 0.45 mSv (pre-industrial value: 0.73 mSv)

  5. Assessing Hydrologic Impacts of Future Land Cover Change Scenarios in the South Platte River Basin (CO, WY, & NE) and the San Pedro River Basin (U.S./Mexico).

    Science.gov (United States)

    Barlow, J. E.; Burns, I. S.; Guertin, D. P.; Kepner, W. G.; Goodrich, D. C.

    2016-12-01

    Long-term land-use and land cover change and their associated impacts pose critical challenges to sustaining vital hydrological ecosystem services for future generations. In this study, a methodology to characterize hydrologic impacts from future urban growth through time that was developed and applied on the San Pedro River Basin was expanded and utilized on the South Platte River Basin as well. Future urban growth is represented by housing density maps generated in decadal intervals from 2010 to 2100, produced by the U.S. Environmental Protection Agency (EPA) Integrated Climate and Land-Use Scenarios (ICLUS) project. ICLUS developed future housing density maps by adapting the Intergovernmental Panel on Climate Change (IPCC) Special Report on Emissions Scenarios (SRES) social, economic, and demographic storylines to the conterminous United States. To characterize hydrologic impacts from future growth, the housing density maps were reclassified to National Land Cover Database (NLCD) 2006 land cover classes and used to parameterize the Soil and Water Assessment Tool (SWAT) using the Automated Geospatial Watershed Assessment (AGWA) tool. The objectives of this project were to 1) develop and implement a methodology for adapting the ICLUS data for use in AGWA as an approach to evaluate impacts of development on water-quantity and -quality, 2) present, evaluate, and compare results from scenarios for watersheds in two different geographic and climatic regions, 3) determine watershed specific implications of this type of future land cover change analysis.

  6. Office of Integrated Assessment and Policy Analysis

    International Nuclear Information System (INIS)

    Parzyck, D.C.

    1980-01-01

    The mission of the Office of Integrated Assessments and Policy Analysis (OIAPA) is to examine current and future policies related to the development and use of energy technologies. The principal ongoing research activity to date has focused on the impacts of several energy sources, including coal, oil shale, solar, and geothermal, from the standpoint of the Resource Conservation and Recovery Act. An additional project has recently been initiated on an evaluation of impacts associated with the implementation of the Toxic Substances Control Act. The impacts of the Resource Conservation and Recovery Act and the Toxic Substances Control Act on energy supply constitute the principal research focus of OIAPA for the near term. From these studies a research approach will be developed to identify certain common elements in the regulatory evaluation cycle as a means of evaluating subsequent environmental, health, and socioeconomic impact. It is planned that an integrated assessment team examine studies completed or underway on the following aspects of major regulations: health, risk assessment, testing protocols, environment control cost/benefits, institutional structures, and facility siting. This examination would assess the methodologies used, determine the general applicability of such studies, and present in a logical form information that appears to have broad general application. A suggested action plan for the State of Tennessee on radioactive and hazardous waste management is outlined

  7. Assessing Extinction Risk: Integrating Genetic Information

    Directory of Open Access Journals (Sweden)

    Jason Dunham

    1999-06-01

    Full Text Available Risks of population extinction have been estimated using a variety of methods incorporating information from different spatial and temporal scales. We briefly consider how several broad classes of extinction risk assessments, including population viability analysis, incidence functions, and ranking methods integrate information on different temporal and spatial scales. In many circumstances, data from surveys of neutral genetic variability within, and among, populations can provide information useful for assessing extinction risk. Patterns of genetic variability resulting from past and present ecological and demographic events, can indicate risks of extinction that are otherwise difficult to infer from ecological and demographic analyses alone. We provide examples of how patterns of neutral genetic variability, both within, and among populations, can be used to corroborate and complement extinction risk assessments.

  8. ASSESSMENT AND DECISION MAKING SCENARIO OF CARBON EMISSION IN SUGAR INDUSTRY BASED ON ENERGY CONSUMPTION USING SYSTEM DYNAMICS

    Directory of Open Access Journals (Sweden)

    CHAIRUL SALEH

    2016-04-01

    Full Text Available This research is conducted to assess and create some scenarios in the sugar industry, which aimed to decrease the production of CO2 emissions in PT Madubaru. In this research, the assessment of CO2 emission is based on the energy consumption used in supply chain activities during the production period in 2014. The problem faced in this research is the used of energy for transportation and production in a complex condition. Thus, simulation modeling based on system dynamic has been proposed to build the assessment model and create a scenario. The result shows that PT Madubaru produces around 174,246,500 kg in 171 days or during the production period in 2014. It means that the amount of CO2 emission in a day is around 1,018,985 kg. Two scenarios haves been developeded in order to reduce CO2 emissions. First, changing the old type boiler with the new one by increasing 155% fuel efficiency. This scenario is proven to reduce the amount of CO2 by 44% or become 98,800,400 kg. Second, eliminating the use of lorry which reduce the 0.2% of CO2 emission or equal to 387,600 kg.

  9. Transport energy demand in Andorra. Assessing private car futures through sensitivity and scenario analysis

    International Nuclear Information System (INIS)

    Travesset-Baro, Oriol; Gallachóir, Brian P.Ó.; Jover, Eric; Rosas-Casals, Marti

    2016-01-01

    This paper presents a model which estimates current car fleet energy consumption in Andorra and forecasts such consumption as a reference scenario. The base-year model is built through a bottom-up methodology using vehicle registration and technical inspection data. The model forecasts energy consumption up to 2050, taking into account the fleet structure, the car survival profile, trends in activity of the various car categories, and the fuel price and income elasticities that affect car stock and total fleet activity. It provides an initial estimate of private car energy demand in Andorra and charts a baseline scenario that describes a hypothetical future based on historical trends. A local sensitivity analysis is conducted to determine the most sensitive input parameters and study the effect of its variability. In addition, the scenario analysis explores the most uncertain future aspects which can cause important variability in the results with respect to the Reference scenario and provides a broad estimate of potential energy savings related to different policy strategies. - Highlights: •A private car energy model is built using aggregated available data. •Andorra's current car fleet energy consumption is estimated and forecasted to 2050. •Potential energy savings have been estimated using sensitivity and scenario analysis.

  10. Performance Assessment of a Solar-Assisted Desiccant-Based Air Handling Unit Considering Different Scenarios

    Directory of Open Access Journals (Sweden)

    Giovanni Angrisani

    2016-09-01

    Full Text Available In this paper, three alternative layouts (scenarios of an innovative solar-assisted hybrid desiccant-based air handling unit (AHU are investigated through dynamic simulations. Performance is evaluated with respect to a reference system and compared to those of the innovative plant without modifications. For each scenario, different collector types, surfaces and tilt angles are considered. The effect of the solar thermal energy surplus exploitation for other low-temperature uses is also investigated. The first alternative scenario consists of the recovery of the heat rejected by the condenser of the chiller to pre-heat the regeneration air. The second scenario considers the pre-heating of regeneration air with the warmer regeneration air exiting the desiccant wheel (DW. The last scenario provides pre-cooling of the process air before entering the DW. Results reveal that the plants with evacuated solar collectors (SC can ensure primary energy savings (15%–24% and avoid equivalent CO2 emissions (14%–22%, about 10 percentage points more than those with flat-plate collectors, when the solar thermal energy is used only for air conditioning and the collectors have the best tilt angle. If all of the solar thermal energy is considered, the best results with evacuated tube collectors are approximately 73% in terms of primary energy saving, 71% in terms of avoided equivalent CO2 emissions and a payback period of six years.

  11. A method for scenario-based risk assessment for robust aerospace systems

    Science.gov (United States)

    Thomas, Victoria Katherine

    involved in completing the modeling and simulation are: Alternative Solution Modeling, Uncertainty Quantification, Risk Assessment, and Risk Mitigation. Focus area three consists of Decision Support. In this area a decision support interface is created that allows for game playing between solution alternatives and risk mitigation. A multi-attribute decision making process is also implemented to aid in decision making. A demonstration problem inspired by Airbus' mid 1980s decision to break into the widebody long-range market was developed to illustrate the use of this method. The results showed that the method is able to capture additional types of risk than previous analysis methods, particularly at the early stages of aircraft design. It was also shown that the method can be used to help create a system that is robust to external environmental factors. The addition of an external environment risk analysis in the early stages of conceptual design can add another dimension to the analysis of feasibility and viability. The ability to take risk into account during the early stages of the design process can allow for the elimination of potentially feasible and viable but too-risky alternatives. The addition of a scenario-based analysis instead of a traditional probabilistic analysis enabled uncertainty to be effectively bound and examined over a variety of potential futures instead of only a single future. There is also potential for a product to be groomed for a specific future that one believes is likely to happen, or for a product to be steered during design as the future unfolds.

  12. Using Scenarios to Assess Policy Mixes for Resource Efficiency and Eco-Innovation in Different Fiscal Policy Frameworks

    Directory of Open Access Journals (Sweden)

    Laurent Bontoux

    2016-03-01

    Full Text Available There is no longer any doubt that the European Union needs to manage a transition towards a sustainable economy and society. The complexity of such an enterprise is creating major challenges that require a future oriented systemic approach, looking at the EU economy and society as a whole, and going beyond current agendas and policies. The purpose of the JRC foresight study “2035: Paths towards a sustainable EU economy” was to explore how this could be possible. Resource efficiency was at the core of the reflection. This created a context where the fiscal framework was perceived by the experts involved as essential in driving (or hindering the evolution towards a more sustainable future. Societal values (individualistic or collaborative were selected as the other axis around which to construct four scenarios. A large number of other drivers of change were taken into account to construct scenarios of a sufficient depth and detail to generate a systemic understanding. The scenarios were used in an original way to help experts identify which policy mixes would be best adapted to push each scenario towards a more sustainable future, while respecting its own logic and constraints. For each scenario, 6 policy domains considered the most relevant were selected among more than 50. Research and innovation, new business models and education were considered important for all four scenarios. The other domains were natural resources management, regulation, ethics, employment, transparency, governance, social protection, and systems integration. The study illustrates how powerful a policy framework which is fiscally supportive of environmental sustainability can be in supporting resource efficiency and that this can be achieved in very different ways depending on the prevailing social values. It also shows how a combination of actions in other policy areas can be used to drive sustainability further. In sum, this work illustrates how the creative use of

  13. Regional Issue Identification and Assessment (RIIA): an analysis of the mid-range projection, Series C Scenario

    Energy Technology Data Exchange (ETDEWEB)

    Honea, B.; Hillsman, E.

    1979-10-01

    The Department of Energy has hypothesized a number of alternate energy futures as part of its energy planning and analysis programs. How a proposed energy future called the Mid-Range Projection Series C Scenario would affect Federal Region VI (Arkansas, Louisiana, Oklahoma, Texas, and New Mexico) is examined in this report. This scenario assumes a medium supply and a medium demand for fuel through 1990, and it incorporates the fuel-switching provisions of the Energy Supply and Environmental Coordination Act. The report portrays the major regional environmental, human health and safety, socioeconomic, and institutional effects that might result from the realization of the Series C Scenario. This discussion should serve as a basis for further assessments, as it identifies some issues of major concern for Region VI that must be addressed in more depth.

  14. Integrity Assessment of GOH Heater Tube

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Bong Sang; Hong, J. H.; Oh, Y. J.; Yoon, J. H.; Oh, J. M. [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1997-08-01

    An assessment of structural integrity of ASTM A312-TP347 GOH heater tube was performed. The surface notches which had been produced during tube manufacturing process were analyzed microscopically. Chemical analysis, hardness tests, tensile tests, and J-Integral fracture resistance tests were carried out to compare the mechanical properties with those of the material specification and also with the other material of the same type. The test results showed the mechanical properties of the GOH tube material are within the specification range. An elastic-plastic fracture mechanics analysis based on the DPFAD method reveals the tube an appropriate safety margin for the normal operation. 13 refs., 5 tabs., 24 figs. (author)

  15. Multi-hazard Assessment and Scenario Toolbox (MhAST): A Framework for Analyzing Compounding Effects of Multiple Hazards

    Science.gov (United States)

    Sadegh, M.; Moftakhari, H.; AghaKouchak, A.

    2017-12-01

    Many natural hazards are driven by multiple forcing variables, and concurrence/consecutive extreme events significantly increases risk of infrastructure/system failure. It is a common practice to use univariate analysis based upon a perceived ruling driver to estimate design quantiles and/or return periods of extreme events. A multivariate analysis, however, permits modeling simultaneous occurrence of multiple forcing variables. In this presentation, we introduce the Multi-hazard Assessment and Scenario Toolbox (MhAST) that comprehensively analyzes marginal and joint probability distributions of natural hazards. MhAST also offers a wide range of scenarios of return period and design levels and their likelihoods. Contribution of this study is four-fold: 1. comprehensive analysis of marginal and joint probability of multiple drivers through 17 continuous distributions and 26 copulas, 2. multiple scenario analysis of concurrent extremes based upon the most likely joint occurrence, one ruling variable, and weighted random sampling of joint occurrences with similar exceedance probabilities, 3. weighted average scenario analysis based on a expected event, and 4. uncertainty analysis of the most likely joint occurrence scenario using a Bayesian framework.

  16. Hydrological and water quality impact assessment of a Mediterranean limno-reservoir under climate change and land use management scenarios

    Science.gov (United States)

    Molina-Navarro, Eugenio; Trolle, Dennis; Martínez-Pérez, Silvia; Sastre-Merlín, Antonio; Jeppesen, Erik

    2014-02-01

    Water scarcity and water pollution constitute a big challenge for water managers in the Mediterranean region today and will exacerbate in a projected future warmer world, making a holistic approach for water resources management at the catchment scale essential. We expanded the Soil and Water Assessment Tool (SWAT) model developed for a small Mediterranean catchment to quantify the potential effects of various climate and land use change scenarios on catchment hydrology as well as the trophic state of a new kind of waterbody, a limno-reservoir (Pareja Limno-reservoir), created for environmental and recreational purposes. We also checked for the possible synergistic effects of changes in climate and land use on water flow and nutrient exports from the catchment. Simulations showed a noticeable impact of climate change in the river flow regime and consequently the water level of the limno-reservoir, especially during summer, complicating the fulfillment of its purposes. Most of the scenarios also predicted a deterioration of trophic conditions in the limno-reservoir. Fertilization and soil erosion were the main factors affecting nitrate and total phosphorus concentrations. Combined climate and land use change scenarios showed noticeable synergistic effects on nutrients exports, relative to running the scenarios individually. While the impact of fertilization on nitrate export is projected to be reduced with warming in most cases, an additional 13% increase in the total phosphorus export is expected in the worst-case combined scenario compared to the sum of individual scenarios. Our model framework may help water managers to assess and manage how these multiple environmental stressors interact and ultimately affect aquatic ecosystems.

  17. Economic consequences assessment for scenarios and actual accidents do the same methods apply

    International Nuclear Information System (INIS)

    Brenot, J.

    1991-01-01

    Methods for estimating the economic consequences of major technological accidents, and their corresponding computer codes, are briefly presented with emphasis on the basic choices. When applied to hypothetic scenarios, those methods give results that are of interest for risk managers with a decision aiding perspective. Simultaneously the various costs, and the procedures for their estimation are reviewed for some actual accidents (Three Mile Island, Chernobyl,..). These costs are used in a perspective of litigation and compensation. The comparison of the methods used and cost estimates obtained for scenarios and actual accidents shows the points of convergence and discrepancies that are discussed

  18. Advanced structural integrity assessment procedures. Working material

    International Nuclear Information System (INIS)

    1994-01-01

    The purpose of the meeting was to provide an international forum for discussion on recent results in research and utility practice in the field of methodology for the structural integrity assessment of components including relevant non-codified procedures. The scope of the meeting included deterministic and probabilistic approaches. The papers covered the following topics: Leak-before-break concepts; non-destructive examination (NDE) and surveillance results; statistical evaluation of non-destructive examination data; pressurized thermal shock evaluation; fatigue effects (including vibration); and verification qualification. The meeting was attended by 32 specialists from 8 countries. Refs, figs and tabs

  19. A study of reactor vessel integrity assessment

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jae Hoon [Korea Institute of Nuclear Safety, Taejon (Korea, Republic of); Kim, Jong Kyung; Shin, Chang Ho; Seo, Bo Kyun [Hanyang Univ., Seoul (Korea, Republic of)

    1999-02-15

    The fast neutron fluence at the Reactor Pressure Vessel(RPV) of KNGR designed for 60 years lifetime was calculated by full-scope Monte Carlo simulation for reactor vessel integrity assessment. KNGR core geometry was modeled on a three-dimensional representation of the one-sixteenth of the reactor in-vessel component. Each fuel assemblies were modeled explicitly, and each fuel pins were axially divided into 5 segments. The maximum flux of 4.3 x 10{sup 10} neutrons/cm{sup 2}. sec at the RPV was obtained by tallying neutrons crossing the beltline of inner surface of the RPV.

  20. Integrated Deterministic-Probabilistic Safety Assessment Methodologies

    Energy Technology Data Exchange (ETDEWEB)

    Kudinov, P.; Vorobyev, Y.; Sanchez-Perea, M.; Queral, C.; Jimenez Varas, G.; Rebollo, M. J.; Mena, L.; Gomez-Magin, J.

    2014-02-01

    IDPSA (Integrated Deterministic-Probabilistic Safety Assessment) is a family of methods which use tightly coupled probabilistic and deterministic approaches to address respective sources of uncertainties, enabling Risk informed decision making in a consistent manner. The starting point of the IDPSA framework is that safety justification must be based on the coupling of deterministic (consequences) and probabilistic (frequency) considerations to address the mutual interactions between stochastic disturbances (e.g. failures of the equipment, human actions, stochastic physical phenomena) and deterministic response of the plant (i.e. transients). This paper gives a general overview of some IDPSA methods as well as some possible applications to PWR safety analyses. (Author)

  1. How to manage uncertainty in future Life Cycle Assessment (LCA) scenarios addressing the effect of climate change in crop production

    DEFF Research Database (Denmark)

    Niero, Monia; Ingvordsen, Cathrine Heinz; Bagger Jørgensen, Rikke

    2015-01-01

    When Life Cycle Assessment (LCA) is used to provide insights on how to pursue future food demand, it faces the challenge to describe scenarios of the future in which the environmental impacts occur. In the case of future crop production, the effects of climate change should be considered. In this......When Life Cycle Assessment (LCA) is used to provide insights on how to pursue future food demand, it faces the challenge to describe scenarios of the future in which the environmental impacts occur. In the case of future crop production, the effects of climate change should be considered....... In this context, the objectives of this paper are two-fold: (i) to recommend an approach to deal with uncertainty in scenario analysis for LCA of crop production in a changed climate, when the goal of the study is to suggest strategies for adaptation of crop cultivation practices towards low environmental impacts...... climate, soil, water loss and production parameters. Secondly, the handling of these factors in the inventory modeling is discussed and finally implemented in the case study. Our approach follows a 3-step procedure consisting of: (1) definition of a baseline scenario at the Life Cycle Inventory (LCI...

  2. WP 2 Report: Integrated Status Quo and Trends Assessment in Wuxi. Overview of WP 2 Results

    Energy Technology Data Exchange (ETDEWEB)

    Dienst, Carmen; Hoeller, Samuel; Saurat, Mathieu; Schneider, Clemens; Xia-Bauer, Chun (Wuppertal Institute (Germany)); Oberheitmann, Andreas (China Environmental Research (China)); Fischer, Tom; Gemmer, Marco; Jiang Tong (China Meteorological Administration, National Climate Centre (China)); Wang Can; Wang Haoping (Tsinghua University, Research Centre for International Environmental Policy (China)); Ren Hongyan; Sui Xinying (Wuxi Low Carbon Development Research Centre (China))

    2013-04-01

    The overall project will scientifically explore the Low Carbon Future City (LCFC) concept in two case studies: the German region of Dusseldorf and the Chinese city of Wuxi, Jiangsu Province. The Wuppertal Institute together with a consortium of Chinese scientific institutes is developing integrated low carbon city strategies for the two pilot regions. The project is funded by the German Stiftung Mercator. Provided in this report, as part of the scientific analysis of the Chinese pilot region, is a comprehensive status quo and trends assessment of greenhouse gas emissions, climate change and resource use in Wuxi. It includes a GHG inventory, a business-as-usual scenario for GHG emissions, scenarios for future climate change and its impacts as well as an analysis of future resource use in the energy and buildings sector of Wuxi. Based on this assessment, the authors have selected key sectors for which low carbon scenarios as well as policy strategies will be finalised.

  3. The Integrated Assessment of Land Degradation

    Directory of Open Access Journals (Sweden)

    Luca Salvati

    Full Text Available This paper reviews recent findings on the complex field of land degradation (LD with focus on the Mediterranean Basin and Italy, in particular. The LD definition and assessment methods are examined in the light of the most important natural and human driving forces of the phenomenon, such as land use and climate changes.Various methodological issues are dealt with from multidisciplinary perspective with the aim of providing the ground for the development of integrated approaches: monitoring needs, assessment of costs, development of mitigation strategies, etc. Factors affecting land vulnerability to degradation are classified into bio-physical and socio-economic drivers with some examples of applications in Italy. The role of determinants such as agricultural development, population growth, and urban sprawl is recognised as important but still ambiguous and thus needs further studies. Based on these findings, policy responses aimed at mitigating LD and thus reducing desertification risk are discussed and methodological proposal are presented.

  4. Chapter 4: Overview of the vegetation management treatment economic analysis module in the integrated landscape assessment project

    Science.gov (United States)

    Xiaoping Zhou; Miles A. Hemstrom

    2014-01-01

    Forest land provides various ecosystem services, including timber, biomass, and carbon sequestration. Estimating trends in these ecosystem services is essential for assessing potential outcomes of landscape management scenarios. However, the state-and transition models used in the Integrated Landscape Assessment Project for simulating landscape changes over time do not...

  5. Attack Trees for Practical Security Assessment: Ranking of Attack Scenarios with ADTool 2.0

    NARCIS (Netherlands)

    Gadyatskaya, Olga; Jhawar, Ravi; Kordy, P.T.; Lounis, Karim; Mauw, Sjouke; Trujillo-Rasua, Rolando

    2016-01-01

    In this tool demonstration paper we present the ADTool2.0: an open-source software tool for design, manipulation and analysis of attack trees. The tool supports ranking of attack scenarios based on quantitative attributes entered by the user; it is scriptable; and it incorporates attack trees with

  6. Environmental and economic assessment of protected crops in four European scenarios

    NARCIS (Netherlands)

    Torrellas, M.; Antón, A.; Ruijs, M.N.A.; Garcia Victoria, N.; Stanghellini, C.; Montero, J.I.

    2012-01-01

    In this study we analysed the environmental and economic profile of current agricultural practices for greenhouse crops, in cold and warm climates in Europe, using four scenarios as reference systems: tomato crop in a plastic greenhouse in Spain, and in glasshouses in Hungary and the Netherlands,

  7. Waste management in the Irkutsk region, Siberia, Russia: An environmental assessment of alternative development scenarios.

    Science.gov (United States)

    Starostina, Vlada; Damgaard, Anders; Eriksen, Marie K; Christensen, Thomas H

    2018-04-01

    The current waste management system, handling around 500,000 t of household, commercial, and institutional waste annually in the Irkutsk region, Siberia, is based on landfilling in an old landfill with no controls of leachate and gas. Life-cycle assessment modelling of the current system shows that it is a major load on the environment, while the simulation of seven alternative systems results in large savings in many impact categories. With respect to climate change, it is estimated that a saving of about 1200 kg CO 2 equivalents is possible per year, per inhabitant, which is a significant reduction in greenhouse gas emissions. The best alternatives involve efficient energy recovery from waste and recycling by source separation for commercial and institutional waste, the major waste type in the Irkutsk region. Recycling of household waste seems less attractive, and it is therefore recommended only to consider this option after experience has been gained with the commercial and institutional waste. Sensitivity analysis shows that recovery of energy - in particular electricity, heat, and steam - from waste is crucial to the environmental performance of the waste management system. This relates to the efficiencies of energy recovery as well as what the recovered energy substitutes, that is, the 'dirtier' the off-set energy, the higher the environmental savings for the waste management system. Since recovered energy may be utilised by only a few energy grids or industrial users, it is recommended to perform additional local assessments of the integration of the waste energy into existing systems and facilities.

  8. Future Extreme Heat Scenarios to Enable the Assessment of Climate Impacts on Public Health over the Coterminous U.S.

    Science.gov (United States)

    Quattrochi, Dale A.; Crosson, William L.; Al-Hamdan, Mohammad Z.; Estes, Maurice G., Jr.

    2013-01-01

    In the United States, extreme heat is the most deadly weather-related hazard. In the face of a warming climate and urbanization, which contributes to local-scale urban heat islands, it is very likely that extreme heat events (EHEs) will become more common and more severe in the U.S. This research seeks to provide historical and future measures of climate-driven extreme heat events to enable assessments of the impacts of heat on public health over the coterminous U.S. We use atmospheric temperature and humidity information from meteorological reanalysis and from Global Climate Models (GCMs) to provide data on past and future heat events. The focus of research is on providing assessments of the magnitude, frequency and geographic distribution of extreme heat in the U.S. to facilitate public health studies. In our approach, long-term climate change is captured with GCM outputs, and the temporal and spatial characteristics of short-term extremes are represented by the reanalysis data. Two future time horizons for 2040 and 2090 are compared to the recent past period of 1981- 2000. We characterize regional-scale temperature and humidity conditions using GCM outputs for two climate change scenarios (A2 and A1B) defined in the Special Report on Emissions Scenarios (SRES). For each future period, 20 years of multi-model GCM outputs are analyzed to develop a 'heat stress climatology' based on statistics of extreme heat indicators. Differences between the two future and the past period are used to define temperature and humidity changes on a monthly time scale and regional spatial scale. These changes are combined with the historical meteorological data, which is hourly and at a spatial scale (12 km), to create future climate realizations. From these realizations, we compute the daily heat stress measures and related spatially-specific climatological fields, such as the mean annual number of days above certain thresholds of maximum and minimum air temperatures, heat indices

  9. Assessing risks and uncertainties in forest dynamics under different management scenarios and climate change

    Directory of Open Access Journals (Sweden)

    Matthias Albert

    2015-05-01

    Full Text Available Background Forest management faces a climate induced shift in growth potential and increasing current and emerging new risks. Vulnerability analysis provides decision support based on projections of natural resources taking risks and uncertainties into account. In this paper we (1 characterize differences in forest dynamics under three management scenarios, (2 analyse the effects of the three scenarios on two risk factors, windthrow and drought stress, and (3 quantify the effects and the amount of uncertainty arising from climate projections on height increment and drought stress. Methods In four regions in northern Germany, we apply three contrasting management scenarios and project forest development under climate change until 2070. Three climate runs (minimum, median, maximum based on the emission scenario RCP 8.5 control the site-sensitive forest growth functions. The minimum and maximum climate run define the range of prospective climate development. Results The projections of different management regimes until 2070 show the diverging medium-term effects of thinnings and harvests and long-term effects of species conversion on a regional scale. Examples of windthrow vulnerability and drought stress reveal how adaptation measures depend on the applied management path and the decision-maker’s risk attitude. Uncertainty analysis shows the increasing variability of drought risk projections with time. The effect of climate projections on height growth are quantified and uncertainty analysis reveals that height growth of young trees is dominated by the age-trend whereas the climate signal in height increment of older trees is decisive. Conclusions Drought risk is a serious issue in the eastern regions independent of the applied silvicultural scenario, but adaptation measures are limited as the proportion of the most drought tolerant species Scots pine is already high. Windthrow risk is no serious overall threat in any region, but adequate

  10. Integration of spatial and temporal data for the definition of different landslide hazard scenarios in the area north of Lisbon (Portugal

    Directory of Open Access Journals (Sweden)

    J. L. Zêzere

    2004-01-01

    Full Text Available A general methodology for the probabilistic evaluation of landslide hazard is applied, taking in account both the landslide susceptibility and the instability triggering factors, mainly rainfall. The method is applied in the Fanhões-Trancão test site (north of Lisbon, Portugal where 100 shallow translational slides were mapped and integrated into a GIS database. For the landslide susceptibility assessment it is assumed that future landslides can be predicted by statistical relationships between past landslides and the spatial data set of the predisposing factors (slope angle, slope aspect, transversal slope profile, lithology, superficial deposits, geomorphology, and land use. Susceptibility is evaluated using algorithms based on statistical/probabilistic analysis (Bayesian model over unique-condition terrain units in a raster basis. The landslide susceptibility map is prepared by sorting all pixels according to the pixel susceptibility value in descending order. In order to validate the results of the susceptibility ana- lysis, the landslide data set is divided in two parts, using a temporal criterion. The first subset is used for obtaining a prediction image and the second subset is compared with the prediction results for validation. The obtained prediction-rate curve is used for the quantitative interpretation of the initial susceptibility map. Landslides in the study area are triggered by rainfall. The integration of triggering information in hazard assessment includes (i the definition of thresholds of rainfall (quantity-duration responsible for past landslide events; (ii the calculation of the relevant return periods; (iii the assumption that the same rainfall patterns (quantity/duration which produced slope instability in the past will produce the same effects in the future (i.e. same types of landslides and same total affected area. The landslide hazard is present as the probability of each pixel to be affected by a slope movement

  11. An improved particle filter and its application to an INS/GPS integrated navigation system in a serious noisy scenario

    International Nuclear Information System (INIS)

    Wang, Xuemei; Ni, Wenbo

    2016-01-01

    For loosely coupled INS/GPS integrated navigation systems with low-cost and low-accuracy microelectromechanical device inertial sensors, in order to obtain enough accuracy, a full-state nonlinear dynamic model rather than a linearized error model is much more preferable. Particle filters are particularly for nonlinear and non-Gaussian situations, but typical bootstrap particle filters (BPFs) and some improved particle filters (IPFs) such as auxiliary particle filters (APFs) and Gaussian particle filters (GPFs) cannot solve the mismatch between the importance function and the likelihood function very well. The predicted particles propagated through inertial navigation equations cannot be scattered with certainty within the effective range of current observation when there are large drift errors of the inertial sensors. Therefore, the current observation cannot play the correction role well and these particle filters are invalid to some extent. The proposed IPF firstly estimates the corresponding state bias errors according to the current observation and then corrects the bias errors of the predicted particles before determining the weights and resampling the particles. Simulations and practical experiments both show that the proposed IPF can effectively solve the mismatch between the importance function and the likelihood function of a BPF and compensate the accumulated errors of INSs very well. It has great robustness in a serious noisy scenario. (paper)

  12. Assessing Orchestrated Simulation Through Modeling to Quantify the Benefits of Unmanned-Teaming in a Tactical ASW Scenario

    Science.gov (United States)

    2018-03-01

    be used by the model to create pseudo- random behavior for agents. This process is a critical aspect of the simulation because it allows for the...ORCHESTRATED SIMULATION THROUGH MODELING TO QUANTIFY THE BENEFITS OF UNMANNED–MANNED TEAMING IN A TACTICAL ASW SCENARIO by Preston T. Tilus March...Leave blank) 2. REPORT DATE March 2018 3. REPORT TYPE AND DATES COVERED Master’s thesis 4. TITLE AND SUBTITLE ASSESSING ORCHESTRATED SIMULATION

  13. Tsunamigenic scenarios for southern Peru and northern Chile seismic gap: Deterministic and probabilistic hybrid approach for hazard assessment

    Science.gov (United States)

    González-Carrasco, J. F.; Gonzalez, G.; Aránguiz, R.; Yanez, G. A.; Melgar, D.; Salazar, P.; Shrivastava, M. N.; Das, R.; Catalan, P. A.; Cienfuegos, R.

    2017-12-01

    Plausible worst-case tsunamigenic scenarios definition plays a relevant role in tsunami hazard assessment focused in emergency preparedness and evacuation planning for coastal communities. During the last decade, the occurrence of major and moderate tsunamigenic earthquakes along worldwide subduction zones has given clues about critical parameters involved in near-field tsunami inundation processes, i.e. slip spatial distribution, shelf resonance of edge waves and local geomorphology effects. To analyze the effects of these seismic and hydrodynamic variables over the epistemic uncertainty of coastal inundation, we implement a combined methodology using deterministic and probabilistic approaches to construct 420 tsunamigenic scenarios in a mature seismic gap of southern Peru and northern Chile, extended from 17ºS to 24ºS. The deterministic scenarios are calculated using a regional distribution of trench-parallel gravity anomaly (TPGA) and trench-parallel topography anomaly (TPTA), three-dimensional Slab 1.0 worldwide subduction zones geometry model and published interseismic coupling (ISC) distributions. As result, we find four higher slip deficit zones interpreted as major seismic asperities of the gap, used in a hierarchical tree scheme to generate ten tsunamigenic scenarios with seismic magnitudes fluctuates between Mw 8.4 to Mw 8.9. Additionally, we construct ten homogeneous slip scenarios as inundation baseline. For the probabilistic approach, we implement a Karhunen - Loève expansion to generate 400 stochastic tsunamigenic scenarios over the maximum extension of the gap, with the same magnitude range of the deterministic sources. All the scenarios are simulated through a non-hydrostatic tsunami model Neowave 2D, using a classical nesting scheme, for five coastal major cities in northern Chile (Arica, Iquique, Tocopilla, Mejillones and Antofagasta) obtaining high resolution data of inundation depth, runup, coastal currents and sea level elevation. The

  14. Long term safety assessment of geological waste disposal systems: issues on release scenarios

    International Nuclear Information System (INIS)

    Khan, S.A.; Qureshi, A.A.

    1995-01-01

    Geological insolation of high level nuclear waste is an attractive waste disposal concept. However, long term safety demonstration of this concept is a major challenge to the operators, regulators and the scientific community. Identification of the factors responsible for the release of radionuclides from geosphere to biosphere,is first step in this regard. Current understanding of the release scenarios indicates that faulting, ground after percolation, seismicity, volcanism and human intrusion are the dominating release factors for most of the candidate rock formations. The major source of uncertainties is the probability values of various release events due to random nature of catastrophic geological events and past poor historical records of the frequencies of such events. There is consensus among the experts that the waste release via human intrusion is the most unpredictable scenario at present state of the knowledge. (author)

  15. Development of exploratory approach for scenario analysis in the performance assessment of geological disposal

    International Nuclear Information System (INIS)

    Makino, Hitoshi; Ishiguro, Katsuhiko; Umeki, Hiroyuki; Oyamada, Kiyoshi; Takase, Hiroyasu; Grindrod, Peter

    1998-01-01

    It becomes difficult to apply the ordinary method for scenario analysis as number of the processes and complexity in their interrelations are increased. For this problem, an exploratory approach, that can perform scenario analysis on wider range of problems, was developed. The approach includes ensemble runs of a mass transport model, that was developed as a generic and flexible model and can cover effects of various processes on the mass transport, and analysis of sensitivity structure among the input and output space of the ensemble runs. The technique of clustering and principal component analysis were applied in the approach. As the result of its test application, applicability of the approach was confirmed to identify important processes from number of the processes in the systematic and objective manner. (author)

  16. High estimates of supply constrained emissions scenarios for long-term climate risk assessment

    International Nuclear Information System (INIS)

    Ward, James D.; Mohr, Steve H.; Myers, Baden R.; Nel, Willem P.

    2012-01-01

    The simulated effects of anthropogenic global warming have become important in many fields and most models agree that significant impacts are becoming unavoidable in the face of slow action. Improvements to model accuracy rely primarily on the refinement of parameter sensitivities and on plausible future carbon emissions trajectories. Carbon emissions are the leading cause of global warming, yet current considerations of future emissions do not consider structural limits to fossil fuel supply, invoking a wide range of uncertainty. Moreover, outdated assumptions regarding the future abundance of fossil energy could contribute to misleading projections of both economic growth and climate change vulnerability. Here we present an easily replicable mathematical model that considers fundamental supply-side constraints and demonstrate its use in a stochastic analysis to produce a theoretical upper limit to future emissions. The results show a significant reduction in prior uncertainty around projected long term emissions, and even assuming high estimates of all fossil fuel resources and high growth of unconventional production, cumulative emissions tend to align to the current medium emissions scenarios in the second half of this century. This significant finding provides much-needed guidance on developing relevant emissions scenarios for long term climate change impact studies. - Highlights: ► GHG emissions from conventional and unconventional fossil fuels modelled nationally. ► Assuming worst-case: large resource, high growth, rapid uptake of unconventional. ► Long-term cumulative emissions align well with the SRES medium emissions scenario. ► High emissions are unlikely to be sustained through the second half of this century. ► Model designed to be easily extended to test other scenarios e.g. energy shortages.

  17. Regional and urban downscaling of global climate scenarios for health impact assessments

    Energy Technology Data Exchange (ETDEWEB)

    San Jose, R.; Perez, J.L.; Perez, L.; Gonzalez, R.M.; Pecci, J.; Garzon, A.; Palacios, M.

    2015-07-01

    In this contribution we have used global climate RCP IPCC scenarios to produce climate and air pollution maps at regional (25 km resolution) and urban scale with 200 m spatial resolution over Europe and five European cities in order to investigate the impact on meteorological variables and pollutant concentrations . We have used the very well known mesoscale meeorological model WRF-Chem (NOAA, US). We have used 2011 as control past year and two RCP scenarios from CCSM global climate model with 4.5 W/m2 and 8.5 W/m2 for 2030, 2050 and 2100 years. After running WRF-Chem model, using the boundary conditions provided by RCP scenarios with the emissions of 2011, we have performed a detailed downscaling process using CALMET diagnostic model to obtain a full 200 m spatial resolution map of five European cities (London, Antwerp, Madrid, Milan, and Helsinki). We will show the results and the health impacts for future RCP IPCC climate scenarios in comparison with the 2011 control year information for climate and health indicators. Finnally, we have also investigated the impact of the aerosol effects in the short wave radiation mean value. Two simulations with the WRF-Chem model have been performed over Europe in 2010. A baseline simulation without any feedback effects and a second simulation including the direct effects affecting the solar radiation reaching the surface as well as the indirect aerosol effect with potential impacts on increasing or decreasing the precipitation rates. Aerosol effects produce an increase of incoming radiation over Atlantic Ocean (up to 70%) because the prescribed aerosol concentrations in the WRF-Chem without feedbacks is substantially higher than the aerosol concentrations produced when we activate the feedback effects. The decrease in solar radiation in the Sahara area (10%) is found to be produced because the prescribed aerosol concentration in the {sup n}o feedback{sup s}imulation is lower than when we activate the feedback effects. (Author)

  18. Scenario based seismic hazard assessment and its application to the seismic verification of relevant buildings

    Science.gov (United States)

    Romanelli, Fabio; Vaccari, Franco; Altin, Giorgio; Panza, Giuliano

    2016-04-01

    The procedure we developed, and applied to a few relevant cases, leads to the seismic verification of a building by: a) use of a scenario based neodeterministic approach (NDSHA) for the calculation of the seismic input, and b) control of the numerical modeling of an existing building, using free vibration measurements of the real structure. The key point of this approach is the strict collaboration, from the seismic input definition to the monitoring of the response of the building in the calculation phase, of the seismologist and the civil engineer. The vibrometry study allows the engineer to adjust the computational model in the direction suggested by the experimental result of a physical measurement. Once the model has been calibrated by vibrometric analysis, one can select in the design spectrum the proper range of periods of interest for the structure. Then, the realistic values of spectral acceleration, which include the appropriate amplification obtained through the modeling of a "scenario" input to be applied to the final model, can be selected. Generally, but not necessarily, the "scenario" spectra lead to higher accelerations than those deduced by taking the spectra from the national codes (i.e. NTC 2008, for Italy). The task of the verifier engineer is to act so that the solution of the verification is conservative and realistic. We show some examples of the application of the procedure to some relevant (e.g. schools) buildings of the Trieste Province. The adoption of the scenario input has given in most of the cases an increase of critical elements that have to be taken into account in the design of reinforcements. However, the higher cost associated with the increase of elements to reinforce is reasonable, especially considering the important reduction of the risk level.

  19. Regional and urban down scaling of global climate scenarios for health impact assessments

    Energy Technology Data Exchange (ETDEWEB)

    San Jose, R.; Perez, J. L.; Perez, L.; Gonzalez, R. M.; Pecci, J.; Garzon, A.; Palacios, M.

    2015-07-01

    In this contribution we have used global climate RCP IPCC scenarios to produce climate and air pollution maps at regional (25 km resolution) and urban scale with 200 m spatial resolution over Europe and five European cities in order to investigate the impact on meteorological variables and pollutant concentrations . We have used the very well known mesoscale meteorological model WRF-Chem (NOAA, US). We have used 2011 as control past year and two RCP scenarios from CCSM global climate model with 4.5 W/m2 and 8.5 W/m2 for 2030, 2050 and 2100 years. After running WRF-Chem model, using the boundary conditions provided by RCP scenarios with the emissions of 2011, we have performed a detailed down scaling process using CALMET diagnostic model to obtain a full 200 m spatial resolution map of five European cities (London, Antwerp, Madrid, Milan, and Helsinki). We will show the results and the health impacts for future RCP IPCC climate scenarios in comparison with the 2011 control year information for climate and health indicators. Finally, we have also investigated the impact of the aerosol effects in the short wave radiation mean value. Two simulations with the WRF-Chem model have been performed over Europe in 2010. A baseline simulation without any feedback effects and a second simulation including the direct effects affecting the solar radiation reaching the surface as well as the indirect aerosol effect with potential impacts on increasing or decreasing the precipitation rates. Aerosol effects produce an increase of incoming radiation over Atlantic Ocean (up to 70%) because the prescribed aerosol concentrations in the WRF-Chem without feedbacks is substantially higher than the aerosol concentrations produced when we activate the feedback effects. The decrease in solar radiation in the Sahara area (10%) is found to be produced because the prescribed aerosol concentration in the no feedback simulation is lower than when we activate the feedback effects. (Author)

  20. An integrated Riverine Environmental Flow Decision Support System (REFDSS) to evaluate the ecological effects of alternative flow scenarios on river ecosystems

    Science.gov (United States)

    Maloney, Kelly O.; Talbert, Colin B.; Cole, Jeffrey C.; Galbraith, Heather S.; Blakeslee, Carrie J.; Hanson, Leanne; Holmquist-Johnson, Christopher L.

    2015-01-01

    In regulated rivers, managers must evaluate competing flow release scenarios that attempt to balance both human and natural needs. Meeting these natural flow needs is complex due to the myriad of interacting physical and hydrological factors that affect ecosystems. Tools that synthesize the voluminous scientific data and models on these factors will facilitate management of these systems. Here, we present the Riverine Environmental Flow Decision Support System (REFDSS), a tool that enables evaluation of competing flow scenarios and other variables on instream habitat. We developed a REFDSS for the Upper Delaware River, USA, a system that is regulated by three headwater reservoirs. This version of the REFDSS has the ability to integrate any set of spatially explicit data and synthesizes modeled discharge for three competing management scenarios, flow-specific 2-D hydrodynamic modeled estimates of local hydrologic conditions (e.g., depth, velocity, shear stress, etc.) at a fine pixel-scale (1 m2), and habitat suitability criteria (HSC) for a variety of taxa. It contains all individual model outputs, computationally integrates these data, and outputs the amount of potentially available habitat for a suite of species of interest under each flow release scenario. Users have the flexibility to change the time period of interest and vary the HSC. The REFDSS was developed to enable side-by-side evaluation of different flow management scenarios and their effects on potential habitat availability, allowing managers to make informed decisions on the best flow scenarios. An exercise comparing two alternative flow scenarios to a baseline scenario for several key species is presented. The Upper Delaware REFDSS was robust to minor changes in HSC (± 10 %). The general REFDSS platform was developed as a user-friendly Windows desktop application that was designed to include other potential parameters of interest (e.g., temperature) and for transferability to other riverine systems.

  1. Climate change impact assessment on flow regime by incorporating spatial correlation and scenario uncertainty

    Science.gov (United States)

    Vallam, P.; Qin, X. S.

    2017-07-01

    Flooding risk is increasing in many parts of the world and may worsen under climate change conditions. The accuracy of predicting flooding risk relies on reasonable projection of meteorological data (especially rainfall) at the local scale. The current statistical downscaling approaches face the difficulty of projecting multi-site climate information for future conditions while conserving spatial information. This study presents a combined Long Ashton Research Station Weather Generator (LARS-WG) stochastic weather generator and multi-site rainfall simulator RainSim (CLWRS) approach to investigate flow regimes under future conditions in the Kootenay Watershed, Canada. To understand the uncertainty effect stemming from different scenarios, the climate output is fed into a hydrologic model. The results showed different variation trends of annual peak flows (in 2080-2099) based on different climate change scenarios and demonstrated that the hydrological impact would be driven by the interaction between snowmelt and peak flows. The proposed CLWRS approach is useful where there is a need for projection of potential climate change scenarios.

  2. Assessing groundwater pollution hazard changes under different socio-economic and environmental scenarios in an agricultural watershed

    Energy Technology Data Exchange (ETDEWEB)

    Lima, M. Lourdes, E-mail: mlima@mdp.edu.ar [Instituto de Geología de Costas y del Cuaternario, FCEyN, Universidad Nacional de Mar del Plata, Funes 3350, Nivel 1, 7600 Mar del Plata (Argentina); Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET) (Argentina); Romanelli, Asunción, E-mail: aromanel@mdp.edu.ar [Instituto de Geología de Costas y del Cuaternario, FCEyN, Universidad Nacional de Mar del Plata, Funes 3350, Nivel 1, 7600 Mar del Plata (Argentina); Instituto de Investigaciones Marinas y Costeras (IIMyC), Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET) (Argentina); Massone, Héctor E., E-mail: hmassone@mdp.edu.ar [Instituto de Geología de Costas y del Cuaternario, FCEyN, Universidad Nacional de Mar del Plata, Funes 3350, Nivel 1, 7600 Mar del Plata (Argentina)

    2015-10-15

    This paper proposes a modeling approach for assessing changes in groundwater pollution hazard under two different socio-economic and environmental scenarios: The first one considers an exponential growth of agriculture land-use (Relegated Sustainability), while the other deals with regional economic growth, taking into account, the restrictions put on natural resources use (Sustainability Reforms). The recent (2011) and forecasted (2030) groundwater pollution hazard is evaluated based on hydrogeological parameters and, the impact of land-use changes in the groundwater system, coupling together a land-use change model (Dyna-CLUE) with a groundwater flow model (MODFLOW), as inputs to a decision system support (EMDS). The Dulce Stream Watershed (Pampa Plain, Argentina) was chosen to test the usefulness and utility of this proposed method. It includes a high level of agricultural activities, significant local extraction of groundwater resources for drinking water and irrigation and extensive available data regarding aquifer features. The Relegated Sustainability Scenario showed a negative change in the aquifer system, increasing (+ 20%; high–very high classes) the contribution to groundwater pollution hazard throughout the watershed. On the other hand, the Sustainability Reforms Scenario displayed more balanced land-use changes with a trend towards sustainability, therefore proposing a more acceptable change in the aquifer system for 2030 with a possible 2% increase (high–very high classes) in groundwater pollution hazard. Results in the recent scenario (2011) showed that 54% of Dulce Stream Watershed still shows a moderate to a very low contribution to groundwater pollution hazard (mainly in the lower area). Therefore, from the point of view of natural resource management, this is a positive aspect, offering possibilities for intervention in order to prevent deterioration and protect this aquifer system. However, since it is quite possible that this aquifer status

  3. Actuarial assessment of future loss scenarios in the German insurance sector

    Science.gov (United States)

    Kubik, A.; Boehm, U.; Born, K.; Broecker, U.; Buechner, M.; Burghoff, O.; Donat, M.; Gerstengarbe, F. W.; Hattermann, F. F.; Held, H.; Kuecken, M.; Leckebusch, G. C.; Ludwig, P.; Nocke, T.; Oesterle, H.; Pardowitz, T.; Pinto, J. G.; Prahl, B. F.; Ulbrich, U.; Werner, P. C.

    2012-04-01

    The German Insurance Association (GDV) analyzed the impacts of climate change for the German insurance market. The work was conducted in cooperation with Potsdam Institute for Climate Impact Research, Freie Universität Berlin and University of Cologne. Different approaches and data sets were used to analyze the impacts of winter storm, hail and floods. High-resolution loss records to residential buildings in Germany were provided. These daily records are available on a fine spatial level of administrative districts from 1997-2007. For the period of 1984-2008 daily losses to residential buildings were derived from motor vehicle own damage insurance, which shows a surprisingly high correlation between building losses and motor vehicle losses caused by natural hazards. Loss functions from GDVs own flood risk model were made available to estimate flood losses. As climate change will progress the mean annual losses in the private residential building insurance might increase. Until 2100 losses due to winter storm could rise by more than 50%. The increase is mainly attributable to the intensification of individual exceptionally severe storms. Climate change will also result in an increase of flood losses. By the end of the century mean losses are expected to be twice as high - depending on the given scenario they could remain constant or triple. Conversely extreme events with high cumulative losses are expected to become significantly more frequent. Storms with a today's return period of 50 years might occur every 10 years at the end of the century. Floods, now returning every 50 years, could arise every 25 years. For the first time hailstorms have been analyzed. It was noticed, that in particular East Germany might be hit more frequently. Despite these findings, i.e. the cost of insurance against natural hazards might increase, the extent of such an increase in Germany should still remain within limits that can be mastered by the insurance companies. But we have to

  4. Safety assessment on the human intrusion scenarios of near surface disposal facility for low and very low level radioactive waste

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Sung Wook; Park, Jin Baek [Korea Radioactive Waste Agency, Daejeon (Korea, Republic of); Park, Sang Ho [Chungnam National University, Daejeon (Korea, Republic of)

    2016-03-15

    The second-stage near surface disposal facility for low and very low level radioactive waste's permanent disposal is to be built. During the institutional control period, the inadvertent intrusion of the general public is limited. But after the institutional control period, the access to the general public is not restricted. Therefore human who has purpose of residence and resource exploration can intrude the disposal facility. In this case, radioactive effects to the intruder should be limited within regulatory dose limits. This study conducted the safety assessment of human intrusion on the second-stage surface disposal facility through drilling and post drilling scenario. Results of drilling and post drilling scenario were satisfied with regulatory dose limits. The result showed that post-drilling scenario was more significant than drilling scenario. According to the human intrusion time and behavior after the closure of the facility, dominant radionuclide contributing to the intruder was different. Sensitivity analyses on the parameters about the human behavior were also satisfied with regulatory dose limits. Especially, manual redistribution factor was the most sensitive parameter on exposure dose. A loading plan of spent filter waste and dry active waste was more effective than a loading plan of spent filter waste and other wastes for the radiological point of view. These results can be expected to provide both robustness and defense in depth for the development of safety case further.

  5. Biodiversity losses and conservation trade-offs: Assessing future urban growth scenarios for a North American trade corridor

    Science.gov (United States)

    Villarreal, Miguel; Norman, Laura M.; Wallace, Cynthia S.A.; Boykin, Kenneth

    2013-01-01

    The Sonoran Desert and Apache Highlands ecoregions of North America are areas of exceptionally high plant and vertebrate biodiversity. However, much of the vertebrate biodiversity is supported by only a few vegetation types with limited distributions, some of which are increasingly threatened by changing land uses. We assessed the impacts of two future urban growth scenarios on biodiversity in a binational watershed in Arizona, USA and Sonora, Mexico. We quantified and mapped terrestrial vertebrate species richness using Wildlife Habitat Relation models and validated the results with data from National Park Service biological inventories. Future urban growth, based on historical trends, was projected to the year 2050 for 1) a “Current Trends” scenario and, 2) a “Megalopolis” scenario that represented a transnational growth corridor with open-space conservation attributes. Based on Current Trends, 45% of existing riparian woodland (267 of 451species), and 34% of semi-desert grasslands (215 of 451 species) will be lost, whereas, in the Megalopolis scenario, these types would decline by 44% and 24% respectively. Outcomes of the two models suggest a trade-off at the taxonomic class level: Current Trends would reduce and fragment mammal and herpetofauna habitat, while Megalopolis would result in loss of avian-rich riparian habitat.

  6. ICUD-0530 Scenario based risk assessment of the dispersion of E-coli from combined sewer overflow to a fresh-water lake

    DEFF Research Database (Denmark)

    Rasmussen, Michael Robdrup; Thorndahl, Søren Liedtke; Nielsen, Jesper Ellerbæk

    2017-01-01

    A scenario based risk assessment method is used to evaluate how combined sewer overflow (CSO) affects a nearby bathing beach in Skanderborg, Denmark. The method combines an urban drainage model with a 3D CFD model to pre-simulate 60 different scenarios, used for assessing the risk of poor bathing...

  7. Updates to the Demographic and Spatial Allocation Models to Produce Integrated Climate and Land Use Scenarios (ICLUS) (Version 2) (External Review Draft)

    Science.gov (United States)

    EPA announced the availability of the draft report, Updates to the Demographic and Spatial Allocation Models to Produce Integrated Climate and Land Use Scenarios (ICLUS) for a 30-day public comment period. The ICLUS version 2 (v2) modeling tool furthered land change mod...

  8. Integrity assessment of a storage tank

    Energy Technology Data Exchange (ETDEWEB)

    Goncalves, Osorio Correa; Santos, Jose Henrique Gomes dos; Carvalho, Alexis Fernandes [PETROBRAS Transporte S.A. (TRANSPETRO), Rio de Janeiro, RJ (Brazil)

    2005-07-01

    In the last internal inspection of a 5000 bbl freshwater storage tank located in a shipping terminal, widespread pitting corrosion was detected on the shell courses. In some of these pits, its depth was such that the remaining thickness was bellow the minimum thickness required according to the design code. Nevertheless, this approach is overly conservative since it does not consider the pits size, depth and spacing. Thanks to advances in stress analysis, new tools are available for the evaluation of damaged equipment widely employed in the oil industry such as pressure vessels, piping and storage tanks. In the present work, the authors present the integrity assessment performed on this tank using the Fitness for Service approach using the methods and procedures contained in the document API RP 579 (Fitness-for-service). (author)

  9. Scenario-based resilience assessment framework for critical infrastructure systems: Case study for seismic resilience of seaports

    International Nuclear Information System (INIS)

    Shafieezadeh, Abdollah; Ivey Burden, Lindsay

    2014-01-01

    A number of metrics in the past have been proposed and numerically implemented to assess the overall performance of large systems during natural disasters and their recovery in the aftermath of the events. Among such performance measures, resilience is a reliable metric. This paper proposes a probabilistic framework for scenario-based resilience assessment of infrastructure systems. The method accounts for uncertainties in the process including the correlation of the earthquake intensity measures, fragility assessment of structural components, estimation of repair requirements, the repair process, and finally the service demands. The proposed method is applied to a hypothetical seaport terminal and the system level performance of the seaport is assessed using various performance metrics. Results of this analysis have shown that medium to large seismic events may significantly disrupt the operation of seaports right after the event and the recovery process may take months. The proposed framework will enable port stakeholders to systematically assess the most-likely performance of the system during expected future earthquake events. - Highlights: • A scenario-based framework for seismic resilience assessment of systems is presented. • Seismic resilience of a hypothetical seaport with realistic settings is studied. • Berth availability is found to govern seaport functionality following earthquakes

  10. A stochastic dynamic model to assess land use change scenarios on the ecological status of fluvial water bodies under the Water Framework Directive

    Energy Technology Data Exchange (ETDEWEB)

    Hughes, Samantha Jane, E-mail: shughes@utad.pt [Fluvial Ecology Laboratory, CITAB – Centre for the Research and Technology of Agro-Environment and Biological Sciences, University of Trás-os-Montes e Alto Douro, Vila Real (Portugal); Cabral, João Alexandre, E-mail: jcabral@utad.pt [Laboratory of Applied Ecology, CITAB – Centre for the Research and Technology of Agro-Environment and Biological Sciences, University of Trás-os-Montes e Alto Douro, Vila Real (Portugal); Bastos, Rita, E-mail: ritabastos@utad.pt [Laboratory of Applied Ecology, CITAB – Centre for the Research and Technology of Agro-Environment and Biological Sciences, University of Trás-os-Montes e Alto Douro, Vila Real (Portugal); Cortes, Rui, E-mail: rcortes@utad.pt [Fluvial Ecology Laboratory, CITAB – Centre for the Research and Technology of Agro-Environment and Biological Sciences, University of Trás-os-Montes e Alto Douro, Vila Real (Portugal); Vicente, Joana, E-mail: jsvicente@fc.up.pt [Centro de Investigacão em Biodiversidade e Recursos Genéticos (CIBIO), Faculdade de Ciências, Universidade do Porto, Porto (Portugal); Eitelberg, David, E-mail: d.a.eitelberg@vu.nl [Faculty of Earth and Life Sciences, VU University Amsterdam, De Boelelaan 1087, 1081 HV Amsterdam (Netherlands); Yu, Huirong, E-mail: h.yu@vu.nl [Faculty of Earth and Life Sciences, VU University Amsterdam, De Boelelaan 1087, 1081 HV Amsterdam (Netherlands); College of Resources and Environmental Sciences, China Agricultural University, 2 Yuanmingyuan W. Road, Haidian District, Beijing 100193 (China); and others

    2016-09-15

    This method development paper outlines an integrative stochastic dynamic methodology (StDM) framework to anticipate land use (LU) change effects on the ecological status of monitored and non-monitored lotic surface waters under the Water Framework Directive (WFD). Tested in the Alto Minho River Basin District in North West Portugal, the model is an innovative step towards developing a decision-making and planning tool to assess the influence impacts such as LU change and climate change on these complex systems. Comprising a series of sequential steps, a Generalized Linear Model based, competing model Multi Model Inference (MMI) approach was used for parameter estimation to identify principal land use types (distal factors) driving change in biological and physicochemical support elements (proximal factors) in monitored water bodies. The framework integrated MMI constants and coefficients of selected LU categories in the StDM simulations and spatial projections to simulate the ecological status of monitored and non-monitored lotic waterbodies in the test area under 2 scenarios of (1) LU intensification and (2) LU extensification. A total of 100 simulations were run for a 50 year period for each scenario. Spatially dynamic projections of WFD metrics were obtained, taking into account the occurrence of stochastic wildfire events which typically occur in the study region and are exacerbated by LU change. A marked projected decline to “Moderate” ecological status for most waterbodies was detected under intensification but little change under extensification; only a few waterbodies fell to “moderate” status. The latter scenario describes the actual regional socio-economic situation of agricultural abandonment due to rural poverty, partly explaining the projected lack of change in ecological status. Based on the WFD “one out all out” criterion, projected downward shifts in ecological status were due to physicochemical support elements, namely increased

  11. A stochastic dynamic model to assess land use change scenarios on the ecological status of fluvial water bodies under the Water Framework Directive

    International Nuclear Information System (INIS)

    Hughes, Samantha Jane; Cabral, João Alexandre; Bastos, Rita; Cortes, Rui; Vicente, Joana; Eitelberg, David; Yu, Huirong

    2016-01-01

    This method development paper outlines an integrative stochastic dynamic methodology (StDM) framework to anticipate land use (LU) change effects on the ecological status of monitored and non-monitored lotic surface waters under the Water Framework Directive (WFD). Tested in the Alto Minho River Basin District in North West Portugal, the model is an innovative step towards developing a decision-making and planning tool to assess the influence impacts such as LU change and climate change on these complex systems. Comprising a series of sequential steps, a Generalized Linear Model based, competing model Multi Model Inference (MMI) approach was used for parameter estimation to identify principal land use types (distal factors) driving change in biological and physicochemical support elements (proximal factors) in monitored water bodies. The framework integrated MMI constants and coefficients of selected LU categories in the StDM simulations and spatial projections to simulate the ecological status of monitored and non-monitored lotic waterbodies in the test area under 2 scenarios of (1) LU intensification and (2) LU extensification. A total of 100 simulations were run for a 50 year period for each scenario. Spatially dynamic projections of WFD metrics were obtained, taking into account the occurrence of stochastic wildfire events which typically occur in the study region and are exacerbated by LU change. A marked projected decline to “Moderate” ecological status for most waterbodies was detected under intensification but little change under extensification; only a few waterbodies fell to “moderate” status. The latter scenario describes the actual regional socio-economic situation of agricultural abandonment due to rural poverty, partly explaining the projected lack of change in ecological status. Based on the WFD “one out all out” criterion, projected downward shifts in ecological status were due to physicochemical support elements, namely increased

  12. Distributed Energy Resources and Dynamic Microgrid: An Integrated Assessment

    Science.gov (United States)

    Shang, Duo Rick

    The overall goal of this thesis is to improve understanding in terms of the benefit of DERs to both utility and to electricity end-users when integrated in power distribution system. To achieve this goal, a series of two studies was conducted to assess the value of DERs when integrated with new power paradigms. First, the arbitrage value of DERs was examined in markets with time-variant electricity pricing rates (e.g., time of use, real time pricing) under a smart grid distribution paradigm. This study uses a stochastic optimization model to estimate the potential profit from electricity price arbitrage over a five-year period. The optimization process involves two types of PHEVs (PHEV-10, and PHEV-40) under three scenarios with different assumptions on technology performance, electricity market and PHEV owner types. The simulation results indicate that expected arbitrage profit is not a viable option to engage PHEVs in dispatching and in providing ancillary services without more favorable policy and PHEV battery technologies. Subsidy or change in electricity tariff or both are needed. Second, it examined the concept of dynamic microgrid as a measure to improve distribution resilience, and estimates the prices of this emerging service. An economic load dispatch (ELD) model is developed to estimate the market-clearing price in a hypothetical community with single bid auction electricity market. The results show that the electricity market clearing price on the dynamic microgrid is predominantly decided by power output and cost of electricity of each type of DGs. At circumstances where CHP is the only source, the electricity market clearing price in the island is even cheaper than the on-grid electricity price at normal times. Integration of PHEVs in the dynamic microgrid will increase electricity market clearing prices. It demonstrates that dynamic microgrid is an economically viable alternative to enhance grid resilience.

  13. Grassland futures in Great Britain - Productivity assessment and scenarios for land use change opportunities.

    Science.gov (United States)

    Qi, Aiming; Holland, Robert A; Taylor, Gail; Richter, Goetz M

    2018-09-01

    To optimise trade-offs provided by future changes in grassland use intensity, spatially and temporally explicit estimates of respective grassland productivities are required at the systems level. Here, we benchmark the potential national availability of grassland biomass, identify optimal strategies for its management, and investigate the relative importance of intensification over reversion (prioritising productivity versus environmental ecosystem services). Process-conservative meta-models for different grasslands were used to calculate the baseline dry matter yields (DMY; 1961-1990) at 1km 2 resolution for the whole UK. The effects of climate change, rising atmospheric [CO 2 ] and technological progress on baseline DMYs were used to estimate future grassland productivities (up to 2050) for low and medium CO 2 emission scenarios of UKCP09. UK benchmark productivities of 12.5, 8.7 and 2.8t/ha on temporary, permanent and rough-grazing grassland, respectively, accounted for productivity gains by 2010. By 2050, productivities under medium emission scenario are predicted to increase to 15.5 and 9.8t/ha on temporary and permanent grassland, respectively, but not on rough grassland. Based on surveyed grassland distributions for Great Britain in 2010 the annual availability of grassland biomass is likely to rise from 64 to 72milliontonnes by 2050. Assuming optimal N application could close existing productivity gaps of ca. 40% a range of management options could deliver additional 21∗10 6 tonnes of biomass available for bioenergy. Scenarios of changes in grassland use intensity demonstrated considerable scope for maintaining or further increasing grassland production and sparing some grassland for the provision of environmental ecosystem services. Copyright © 2018 The Authors. Published by Elsevier B.V. All rights reserved.

  14. Assessing cost-effectiveness of bioretention on stormwater in response to climate change and urbanization for future scenarios

    Science.gov (United States)

    Wang, Mo; Zhang, Dongqing; Adhityan, Appan; Ng, Wun Jern; Dong, Jianwen; Tan, Soon Keat

    2016-12-01

    Bioretention, as a popular low impact development practice, has become more important to mitigate adverse impacts on urban stormwater. However, there is very limited information regarding ensuring the effectiveness of bioretention response to uncertain future challenges, especially when taking into consideration climate change and urbanization. The main objective of this paper is to identify the cost-effectiveness of bioretention by assessing the hydrology performance under future scenarios modeling. First, the hydrology model was used to obtain peak runoff and TSS loads of bioretention with variable scales under different scenarios, i.e., different Representative Concentration Pathways (RCPs) and Shared Socio-economic reference Pathways (SSPs) for 2-year and 10-year design storms in Singapore. Then, life cycle costing (LCC) and life cycle assessment (LCA) were estimated for bioretention, and the cost-effectiveness was identified under different scenarios. Our finding showed that there were different degree of responses to 2-year and 10-year design storms but the general patterns and insights deduced were similar. The performance of bioretenion was more sensitive to urbanization than that for climate change in the urban catchment. In addition, it was noted that the methodology used in this study was generic and the findings could be useful as reference for other LID practices in response to climate change and urbanization.

  15. Assessment of future agricultural conditions in southwestern Africa using fuzzy logic and high-resolution climate model scenarios

    Directory of Open Access Journals (Sweden)

    Weinzierl, Thomas

    2015-12-01

    Full Text Available Climate change is expected to have a major impact on the arid savanna regions of southwestern Africa, such as the Okavango Basin. Precipitation is a major constraint for agriculture in countries like Namibia and Botswana and assessments of future crop growth conditions are in high demand. This GIS-based approach uses reanalysis data and climate model output for two scenarios and compares them to the precipitation requirements of the five most important crops grown in the region: maize, pearl millet, sorghum, cassava and cow pea. It also takes into account the dominant soil types, as plant growth is also limited by nutrient-poor soils with unfavorable physical and chemical properties. The two factors are then combined using a fuzzy logic algorithm. The assessment visualizes the expected shifts in suitable zones and identifies areas where farming without irrigation may experience a decline in yields or may even no longer be possible at the end of the 21st century. The results show that pearl millet is the most suitable crop in all scenarios while especially the cultivation of maize, sorghum and cow pea may be affected by a possible reduction of precipitation under the high-emission scenario.

  16. HANFORD Pu-238 DRUM INTEGRITY ASSESSMENT

    International Nuclear Information System (INIS)

    CANNELL, G.R.

    2004-01-01

    Hanford is presently retrieving contact-handled, transuranic (CH-TRU) waste drums from the site's Low-Level Burial Grounds (LLBG) for processing and disposition. A subgroup of these drums (12 total), referred to as Pu-238 drums, has some unique characteristics that may impact the current drum handling and processing activities. These characteristics include content, shielding, thermal, pressurization and criticality issues. An effort to evaluate these characteristics, for the purpose of developing a specific plan for safe retrieval of the Pu-238 drums, is underway. In addition to the above evaluation, the following integrity assessment of the inner container material and/or confinement properties, with primary emphasis on the Source Capsule (primary confinement barrier) and Shipping Container has been performed. Assessment included review of the inner container materials and the potential impact the service history may have had on material and/or confinement properties. Several environmental degradation mechanisms were considered with the objective of answering the following question: Is it likely the container material and/or confinement properties have been significantly altered as a result of service history?

  17. Assessing the environmental costs and benefits of plantations under future carbon pricing scenarios

    Science.gov (United States)

    Jackson, R. B.; Barrett, D. J.; Farley, K.; Guenther, A.; Jobbágy, E. G.; Murray, B. C.; McCarl, B. A.; Schlesinger, W. H.

    2004-12-01

    Carbon sequestration programs are gaining attention globally as a means to offset increasing fossil fuel emissions and atmospheric carbon dioxide concentrations. We are examining scenarios of C sequestration in four regions of the world: the U.S., South America, China, and Australia. The analysis uses economic models to predict where the plantations will be grown and then categorizes the other biogeochemical changes that will likely occur. The goals of the project include: 1) Evaluating the assumptions behind C sequestration programs for plantations, including the importance of rotation rates, a full accounting of carbon costs (e.g., planting and site preparation), and how the C would be stored and safeguarded. 2) Examining the scale of the process needed to make a substantial contribution to offset fossil fuel emissions (see below). The scenario we have chosen to evaluate is one that addresses the consequences of storing 1 PgC yr-1 for 50 years. 3) Determining and summarizing the evidence for other biogeochemical changes that will likely occur. Some of the factors to be evaluated include soil acidification, changes in water fluxes and water-table dynamics, nutrient losses, changes in soil fauna and biodiversity, volatile organic carbon emissions, and erosion. 4) A final goal of the project is to make concrete recommendations for where plantations may be the most beneficial in terms of C storage and other environmental benefits, such as the amelioration of salinity and groundwater upwelling in Australia.

  18. Modeling potential scenarios of the Tangjiashan Lake outburst and risk assessment in the downstream valley

    Science.gov (United States)

    Kidyaeva, Vera; Chernomorets, Sergey; Krylenko, Inna; Wei, Fangqiang; Petrakov, Dmitry; Su, Pengcheng; Yang, Hongjuan; Xiong, Junnan

    2017-09-01

    This research is devoted to Tangjiashan Lake, a quake landslide-dammed lake, situated in Sichuan Province, China, which was formed by a landslide triggered by the Wenchuan Earthquake on 12 May 2008. A STREAM_2D two-dimensional hydrodynamic model of Russia was applied to simulate the process of two flood scenarios: 1, lake dam outbreak, and 2, dam overtopping. An artificial dam outbreak was made after the earthquake to lower the water level of the lake in 2008, which led to a great flood with a maximum water discharge of more than 6400 m3/s. The negative impact of the flood was reduced by a timely evacuation of the population. Flood hazards still remain in the event of new landslides into the lake and lake dam overtopping (Scenario 2), in which case a maximum water discharge at the dam crest would reach 5000 m3/s, placing the population of Shabacun and Shilingzi villages in the zone of flood impact.

  19. Scenario comparisons of gasification technology using energy life cycle assessment for bioenergy recovery from rice straw in Taiwan

    International Nuclear Information System (INIS)

    Shie, J.L.; Lee, C.H.; Chen, C.S.; Lin, K.L.; Chang, C.Y.

    2014-01-01

    Highlights: • The energy balances of potential gasification technology and limitation boundary are evaluated. • The transportation and pre-treatment are the greatest parts of energy use. • Every technology process has positive energy benefits at all on-site pre-treatment cases. • The optimal ranges of transportation distance and treatment capacity are suggested. • The optimal technology from the tendency model is addressed. - Abstract: This study uses different scenarios to evaluate, by means of energy life-cycle assessments (ELCAs), the energy balance of potential gasification technology and limitation boundaries in Taiwan. Rice straw is chosen as the target material in this study because it is the most significant agriculture waste in Taiwan. Energy products include syngas (CO + H 2 ), methane, carbon dioxide and carbon black residue. The scenarios simulate capacities of 50,000–200,000 tons/year. The distances of collection and transportation are calculated by a circular area 50–100 km in diameter. Also, the on-site and off-site pretreatments of rice straw are evaluated. For this optimum scenario case, the average of the total input energy for the assessed systems is about 15.9% of the average output energy; the value of the net energy balance (NEB) is 0.841. Every technological process has positive energy benefits at all on-site scenario cases. As the capacity is increased, the energy consumption required for transportation increases and the values of the energy indicators decrease. According to the limitation boundaries from the tendency model at on-site cases, the suggested transportation distance and treatment capacity are below 114.72 km and 251,533 tons/year, respectively, while the energy return on investment (EROI) value is greater than 1

  20. Earthquake induced liquefaction hazard, probability and risk assessment in the city of Kolkata, India: its historical perspective and deterministic scenario

    Science.gov (United States)

    Nath, Sankar Kumar; Srivastava, Nishtha; Ghatak, Chitralekha; Adhikari, Manik Das; Ghosh, Ambarish; Sinha Ray, S. P.

    2018-01-01

    Liquefaction-induced ground failure is one amongst the leading causes of infrastructure damage due to the impact of large earthquakes in unconsolidated, non-cohesive, water saturated alluvial terrains. The city of Kolkata is located on the potentially liquefiable alluvial fan deposits of Ganga-Bramhaputra-Meghna Delta system with subsurface litho-stratigraphic sequence comprising of varying percentages of clay, cohesionless silt, sand, and gravel interbedded with decomposed wood and peat. Additionally, the region has moderately shallow groundwater condition especially in the post-monsoon seasons. In view of burgeoning population, there had been unplanned expansion of settlements in the hazardous geological, geomorphological, and hydrological conditions exposing the city to severe liquefaction hazard. The 1897 Shillong and 1934 Bihar-Nepal earthquakes both of M w 8.1 reportedly induced Modified Mercalli Intensity of IV-V and VI-VII respectively in the city reportedly triggering widespread to sporadic liquefaction condition with surface manifestation of sand boils, lateral spreading, ground subsidence, etc., thus posing a strong case for liquefaction potential analysis in the terrain. With the motivation of assessing seismic hazard, vulnerability, and risk of the city of Kolkata through a consorted federal funding stipulated for all the metros and upstart urban centers in India located in BIS seismic zones III, IV, and V with population more than one million, an attempt has been made here to understand the liquefaction susceptibility condition of Kolkata under the impact of earthquake loading employing modern multivariate techniques and also to predict deterministic liquefaction scenario of the city in the event of a probabilistic seismic hazard condition with 10% probability of exceedance in 50 years and a return period of 475 years. We conducted in-depth geophysical and geotechnical investigations in the city encompassing 435 km2 area. The stochastically

  1. Clear Channel Assessment in Integrated Medical Environments

    Directory of Open Access Journals (Sweden)

    Bin Zhen

    2008-03-01

    Full Text Available Complementary WLAN and WPAN technologies as well as other wireless technologies will play a fundamental role in the medical environments to support ubiquitous healthcare delivery. This paper investigates clear channel assessment (CCA and its impact on the coexistence of WLAN (IEEE 802.11 high rate direct sequence spread spectrum (HR/DSSS PHY and WPAN (IEEE 802.15.4b in the 2.4 GHz industrial, scientific, and medical (ISM band. We derived closed-form expressions of both energy-based CCA and feature-based CCA. We qualified unequal sensing abilities between them and termed this inequality asymmetric CCA, which is different from the traditional “hidden node” or “exposed node” issues in the homogeneous network. The energy-based CCA was considered in the considered integrated medical environment because the 2.4 GHz ISM band is too crowded to apply feature-based CCA. The WPAN is oversensitive to the 802.11 HR/DSSS signals and the WLAN is insensitive to the 802.15.4b signals. Choosing an optimal CCA threshold requires some prior knowledge of the underlying signals. In the integrated medical environment we considered here, energy-based CCA can effectively avoid possible packet collisions when they are close within the “heterogeneous exclusive CCA range” (HECR. However, when they are separated beyond the HECR, WPAN can still sense the 802.11 HR/DSSS signals, but WLAN loses its sense to the 802.15.4b signals. The asymmetric CCA leads to WPAN traffic in a position secondary to WLAN traffic.

  2. Clear Channel Assessment in Integrated Medical Environments

    Directory of Open Access Journals (Sweden)

    Hara Shinsuke

    2008-01-01

    Full Text Available Abstract Complementary WLAN and WPAN technologies as well as other wireless technologies will play a fundamental role in the medical environments to support ubiquitous healthcare delivery. This paper investigates clear channel assessment (CCA and its impact on the coexistence of WLAN (IEEE 802.11 high rate direct sequence spread spectrum (HR/DSSS PHY and WPAN (IEEE 802.15.4b in the 2.4 GHz industrial, scientific, and medical (ISM band. We derived closed-form expressions of both energy-based CCA and feature-based CCA. We qualified unequal sensing abilities between them and termed this inequality asymmetric CCA, which is different from the traditional "hidden node" or "exposed node" issues in the homogeneous network. The energy-based CCA was considered in the considered integrated medical environment because the 2.4 GHz ISM band is too crowded to apply feature-based CCA. The WPAN is oversensitive to the 802.11 HR/DSSS signals and the WLAN is insensitive to the 802.15.4b signals. Choosing an optimal CCA threshold requires some prior knowledge of the underlying signals. In the integrated medical environment we considered here, energy-based CCA can effectively avoid possible packet collisions when they are close within the "heterogeneous exclusive CCA range" (HECR. However, when they are separated beyond the HECR, WPAN can still sense the 802.11 HR/DSSS signals, but WLAN loses its sense to the 802.15.4b signals. The asymmetric CCA leads to WPAN traffic in a position secondary to WLAN traffic.

  3. It's the Heat AND the Humidity -- Assessment of Extreme Heat Scenarios to Enable the Assessment of Climate Impacts on Public Health

    Science.gov (United States)

    Crosson, William L; Al-Hamdan, Mohammad Z.; Economou, Sigrid, A.; Estes, Maurice G.; Estes, Sue M.; Puckett, Mark; Quattrochi, Dale A

    2013-01-01

    In the United States, extreme heat is the most deadly weather-related hazard. In the face of a warming climate and urbanization, which contributes to local-scale urban heat islands, it is very likely that extreme heat events (EHEs) will become more common and more severe in the U.S. In a NASA-funded project supporting the National Climate Assessment, we are providing historical and future measures of extreme heat to enable assessments of the impacts of heat on public health over the coterminous U.S. We use atmospheric temperature and humidity information from meteorological reanalysis and from Global Climate Models (GCMs) to provide data on past and future heat events. The project s emphasis is on providing assessments of the magnitude, frequency and geographic distribution of extreme heat in the U.S. to facilitate public health studies. In our approach, long-term climate change is captured with GCM output, and the temporal and spatial characteristics of short-term extremes are represented by the reanalysis data. Two future time horizons, 2040 and 2090, are the focus of future assessments; these are compared to the recent past period of 1981-2000. We are characterizing regional-scale temperature and humidity conditions using GCM output for two climate change scenarios (A2 and A1B) defined in the Special Report on Emissions Scenarios (SRES). For each future period, 20 years of multi-model GCM output have been analyzed to develop a heat stress climatology based on statistics of extreme heat indicators. Differences between the two future and past periods have been used to define temperature and humidity changes on a monthly time scale and regional spatial scale. These changes, combined with hourly historical meteorological data at a spatial scale (12 km) much finer than that of GCMs, enable us to create future climate realizations, from which we compute the daily heat stress measures and related spatially-specific climatological fields. These include the mean annual

  4. Integrated modelling of economic-energy-environment scenarios - The impact of China and India's economic growth on energy use and CO2 emissions

    International Nuclear Information System (INIS)

    Roques, F.; Sassi, O.; Guivarch, C.; Waisman, H.; Crassous, R.; Hourcade, J.Ch.

    2009-03-01

    A hybrid framework coupling the bottom-up energy sector WEM model with the top-down general equilibrium model IMACLIM-R is implemented to capture the macro-economic feedbacks of Chinese and Indian economic growth on energy and emissions scenarios. The iterative coupling procedure captures the detailed representation of energy use and supply while ensuring the micro-economic and macro-economic consistency of the different scenarios studied. The dual representation of the hybrid model facilitates the incorporation of energy sector expertise in internally consistent scenarios. The paper describes how the hybrid model was used to assess the effect of uncertainty on economic growth in China and India in the energy and emissions scenarios of the International Energy Agency. (authors)

  5. Assessing Land Use-Cover Changes and Modelling Change Scenarios in Two Mountain Spanish National Parks

    Directory of Open Access Journals (Sweden)

    Javier Martínez-Vega

    2017-11-01

    Full Text Available Land Use-Cover Changes (LUCCs are one of the main problems for the preservation of biodiversity. Protected Areas (PAs do not escape this threat. Some processes, such as intensive recreational use, forest fires or the expansion of artificial areas taking place inside and around them in response to their appeal, question their environmental sustainability and their efficiency. In this paper, we analyze the LUCCs that took place between 1990 and 2006 in two National Parks (NPs belonging to the Spanish network and in their surroundings: Ordesa and Monte Perdido (Ordesa NP and Sierra de Guadarrama (Guadarrama NP. We also simulate land use changes between 2006 and 2030 by means of Artificial Neural Networks (ANNs, taking into account two scenarios: trend and green. Finally, we perform a multi-temporal analysis of natural habitat fragmentation in each NP. The results show that the NPs analyzed are well-preserved and have seen hardly any significant LUCCs inside them. However, Socioeconomic Influence Zones (SIZs and buffers are subject to different dynamics. In the SIZ and buffer of the Ordesa NP, there has been an expansion of built-up areas (annual rate of change = +1.19 around small urban hubs and ski resorts. There has also been a gradual recovery of natural areas, which had been interrupted by forest fires. The invasion of sub-alpine grasslands by shrubs is clear (+2735 ha. The SIZ and buffer of the Guadarrama NP are subject to urban sprawl in forest areas and to the construction of road infrastructures (+5549 ha and an annual rate of change = +1.20. Industrial area has multiplied by 3.3 in 20 years. The consequences are an increase in the Wildland-Urban Interface (WUI, greater risk of forest fires and greater fragmentation of natural habitats (+0.04 in SIZ. In the change scenarios, if conditions change as expected, the specific threats facing each NP can be expected to increase. There are substantial differences between the scenarios depending on

  6. Worst-Case Scenario Tsunami Hazard Assessment in Two Historically and Economically Important Districts in Eastern Sicily (Italy)

    Science.gov (United States)

    Armigliato, A.; Tinti, S.; Pagnoni, G.; Zaniboni, F.; Paparo, M. A.

    2015-12-01

    The portion of the eastern Sicily coastline (southern Italy), ranging from the southern part of the Catania Gulf (to the north) down to the southern-eastern end of the island, represents a very important geographical domain from the industrial, commercial, military, historical and cultural points of view. Here the two major cities of Augusta and Siracusa are found. In particular, the Augusta bay hosts one of the largest petrochemical poles in the Mediterranean, and Siracusa is listed among the UNESCO World Heritage Sites since 2005. This area was hit by at least seven tsunamis in the approximate time interval from 1600 BC to present, the most famous being the 365, 1169, 1693 and 1908 tsunamis. The choice of this area as one of the sites for the testing of innovative methods for tsunami hazard, vulnerability and risk assessment and reduction is then fully justified. This is being developed in the frame of the EU Project called ASTARTE - Assessment, STrategy And Risk Reduction for Tsunamis in Europe (Grant 603839, 7th FP, ENV.2013.6.4-3). We assess the tsunami hazard for the Augusta-Siracusa area through the worst-case credible scenario technique, which can be schematically divided into the following steps: 1) Selection of five main source areas, both in the near- and in the far-field (Hyblaean-Malta escarpment, Messina Straits, Ionian subduction zone, Calabria offshore, western Hellenic Trench); 2) Choice of potential and credible tsunamigenic faults in each area: 38 faults were selected, with properly assigned magnitude, geometry and focal mechanism; 3) Computation of the maximum tsunami wave elevations along the eastern Sicily coast on a coarse grid (by means of the in-house code UBO-TSUFD) and extraction of the 9 scenarios that produce the largest effects in the target areas of Augusta and Siracusa; 4) For each of the 9 scenarios we run numerical UBO-TSUFD simulations over a set of five nested grids, with grid cells size decreasing from 3 km in the open Ionian

  7. Contrasting safety assessments of a runway incursion scenario: Event sequence analysis versus multi-agent dynamic risk modelling

    International Nuclear Information System (INIS)

    Stroeve, Sybert H.; Blom, Henk A.P.; Bakker, G.J.

    2013-01-01

    In the safety literature it has been argued, that in a complex socio-technical system safety cannot be well analysed by event sequence based approaches, but requires to capture the complex interactions and performance variability of the socio-technical system. In order to evaluate the quantitative and practical consequences of these arguments, this study compares two approaches to assess accident risk of an example safety critical sociotechnical system. It contrasts an event sequence based assessment with a multi-agent dynamic risk model (MA-DRM) based assessment, both of which are performed for a particular runway incursion scenario. The event sequence analysis uses the well-known event tree modelling formalism and the MA-DRM based approach combines agent based modelling, hybrid Petri nets and rare event Monte Carlo simulation. The comparison addresses qualitative and quantitative differences in the methods, attained risk levels, and in the prime factors influencing the safety of the operation. The assessments show considerable differences in the accident risk implications of the performance of human operators and technical systems in the runway incursion scenario. In contrast with the event sequence based results, the MA-DRM based results show that the accident risk is not manifest from the performance of and relations between individual human operators and technical systems. Instead, the safety risk emerges from the totality of the performance and interactions in the agent based model of the safety critical operation considered, which coincides very well with the argumentation in the safety literature.

  8. Bridging information requirements and information needs assessment: do scenarios and vignettes provide a link?

    Directory of Open Access Journals (Sweden)

    Christine Urquhart

    2001-01-01

    Full Text Available The aim of the paper is to compare the philosophies of the vignette and critical incident techniques in information behaviour research, with the methodologies used in object oriented analysis such as use case scenarios and CRC (class, responsibility, collaboration cards. The principles of object oriented analysis are outlined, noting the emphasis on obtaining the "storyline" or "scripts" for information requirements analysis through use cases and CRC cards.  The critical incident technique and vignettes are used to obtain valid interpretations of users" information behaviour, using a storyline approach for data collection (and analysis which is similar to that of object oriented analysis. Some examples illustrate how techniques developed in object oriented analysis could be used for data display in information behaviour studies. Concludes that the methods developed by software engineering could be adapted usefully for information behaviour research.

  9. Environmental implications of large-scale adoption of wind power: a scenario-based life cycle assessment

    International Nuclear Information System (INIS)

    Arvesen, Anders; Hertwich, Edgar G

    2011-01-01

    We investigate the potential environmental impacts of a large-scale adoption of wind power to meet up to 22% of the world’s growing electricity demand. The analysis builds on life cycle assessments of generic onshore and offshore wind farms, meant to represent average conditions for global deployment of wind power. We scale unit-based findings to estimate aggregated emissions of building, operating and decommissioning wind farms toward 2050, taking into account changes in the electricity mix in manufacturing. The energy scenarios investigated are the International Energy Agency’s BLUE scenarios. We estimate 1.7–2.6 Gt CO 2 -eq climate change, 2.1–3.2 Mt N-eq marine eutrophication, 9.2–14 Mt NMVOC photochemical oxidant formation, and 9.5–15 Mt SO 2 -eq terrestrial acidification impact category indicators due to global wind power in 2007–50. Assuming lifetimes 5 yr longer than reference, the total climate change indicator values are reduced by 8%. In the BLUE Map scenario, construction of new capacity contributes 64%, and repowering of existing capacity 38%, to total cumulative greenhouse gas emissions. The total emissions of wind electricity range between 4% and 14% of the direct emissions of the replaced fossil-fueled power plants. For all impact categories, the indirect emissions of displaced fossil power are larger than the total emissions caused by wind power.

  10. Distributional aspects of emissions in climate change integrated assessment models

    International Nuclear Information System (INIS)

    Cantore, Nicola

    2011-01-01

    The recent failure of Copenhagen negotiations shows that concrete actions are needed to create the conditions for a consensus over global emission reduction policies. A wide coalition of countries in international climate change agreements could be facilitated by the perceived fairness of rich and poor countries of the abatement sharing at international level. In this paper I use two popular climate change integrated assessment models to investigate the path and decompose components and sources of future inequality in the emissions distribution. Results prove to be consistent with previous empirical studies and robust to model comparison and show that gaps in GDP across world regions will still play a crucial role in explaining different countries contributions to global warming. - Research highlights: → I implement a scenario analysis with two global climate change models. → I analyse inequality in the distribution of emissions. → I decompose emissions inequality components. → I find that GDP per capita is the main Kaya identity source of emissions inequality. → Current rich countries will mostly remain responsible for emissions inequality.

  11. Assessment of reactor vessel integrity (ARVI)

    Energy Technology Data Exchange (ETDEWEB)

    Sehgal, B.R. E-mail: sehgal@ne.kth.se; Theerthan, A.; Giri, A.; Karbojian, A.; Willschuetz, H.G.; Kymaelaeinen, O.; Vandroux, S.; Bonnet, J.M.; Seiler, J.M.; Ikkonen, K.; Sairanen, R.; Bhandari, S.; Buerger, M.; Buck, M.; Widmann, W.; Dienstbier, J.; Techy, Z.; Kostka, P.; Taubner, R.; Theofanous, T.; Dinh, T.N

    2003-04-01

    The cost-shared project ARVI (assessment of reactor vessel integrity) involves a total of nine organisations from Europe and USA. The objective of the ARVI Project is to resolve the safety issues that remain unresolved for the melt vessel interaction phase of the in-vessel progression of a severe accident. The work consists of experiments and analysis development. Four tests were performed in the EC-FOREVER Programme, in which failure was achieved in-vessels employing the French pressure vessel steel. The tests were analysed with the commercial code ANSYS-Multiphysics, and the codes SYSTUS+ and PASULA, and quite good agreement was achieved for the failure location. Natural convection experiments in stratified pools have been performed in the SIMECO and the COPO facilities, which showed that much greater heat is transferred downwards for immiscible layers or before layers mix. A model for gap cooling and a set of simplified models for the system codes have been developed. MVITA code calculations have been performed for the Czech and Hungarian VVERs, towards evaluation of the in-vessel melt retention accident management scheme. Tests have been performed at the ULPU facility with organised flow for vessel external cooling. Considerable enhancement of the critical heat flux (CHF) was obtained. The ARVI Project has reached the halfway stage. This paper presents the results obtained thus far from the project.

  12. Assessment and comparison of two early warning indicator methods in the perspective of prevention of atypical accident scenarios

    International Nuclear Information System (INIS)

    Paltrinieri, Nicola; Øien, Knut; Cozzani, Valerio

    2012-01-01

    Some severe major accidents occurred in Europe in recent years (e.g. the Vapour Cloud Explosion at Buncefield in 2005), which were not foreseen by their site “Seveso-II” safety reports. Detailed analyses of such “atypical” scenarios demonstrated that they are the result of a number of failures at different technical and organizational levels. Thus, their prevention is a major challenge and must be coordinated through different kinds of approaches, among which improved early detection plays an important role. Proactive methodologies for the development of early warning indicators can unveil early deviations in the causal chain. Two examples are the Resilience-based Early Warning Indicator (REWI) method and the so-called “Dual Assurance” method. The aim of this study was to analyse the possible integration of early warning indicators in the hazard identification process. A Buncefield-like site was analysed to obtain indicators that were compared with the actual causes that led to the accident at Buncefield (and to similar accident scenarios). The results show that indicators from both methods could have prevented the accidents from happening. However, one main difference is related to the issue of hazard identification, which is fundamental for the prevention of atypical accident scenarios. The REWI method is not dependent on the outcome of the hazard identification process. Instead it provides complementarities to the first prevention approach (improved identification of atypical scenarios), demonstrating that a mutual activity would be an effective strategy in which human, organizational, cultural and technical factors are treated in an integrated manner. - Highlights: ► Early warning indicators were created through 2 methods for the Buncefield oil depot. ► A general capacity to cover causes of atypical events was demonstrated. ► The Dual Assurance method showed to mainly cover operability failures. ► The REWI method showed to promote acts

  13. New ways for the integrated appraisal of national energy scenarios: The case of renewable energy use in Austria

    International Nuclear Information System (INIS)

    Madlener, Reinhard; Kowalski, Katharina; Stagl, Sigrid

    2007-01-01

    Increasing the contribution of renewable energy sources in heat and electricity production is a nationally and internationally acknowledged aim for sustainable development. In this context, the participatory development and appraisal of energy scenarios can be useful for enabling stakeholders to explore future energy options and for supporting the national policy discourse. The five renewable energy scenarios considered refer to Austria in the year 2020. The innovative methodology applied, which was developed as part of the ARTEMIS project, examines possible energy futures paths by combining (1) scenario development; (2) multi-criteria evaluation; and (3) a participatory process with stakeholders and energy experts on the national level. Economic, social, environmental and technological impacts as well as revealed social preferences are used for the ranking of the scenarios. Due to the paramount importance of bioenergy in Austria, special emphasis in the scenario development is put on the contribution of biomass. Two main bioenergy issues and their consideration in the ARTEMIS project are explicitly addressed in this paper: the cascadic utilisation of biomass resources and the demand for land area and land area conflicts. Overall, we demonstrate how the methodology can be applied in practice and what insights policy-makers can gain from it. We also explore the methodology's limitations, especially regarding the effort required for participatory scenario building and the availability of stakeholders

  14. Assessment of the Future Health Burden Attributable to Undernutrition under the Latest Scenario Framework for Climate Change Research

    Science.gov (United States)

    Ishida, Hiroyuki; Kobayashi, Shota; Yoshikawa, Sayaka; Kanae, Shinjiro; Hasegawa, Tomoko; Fujimori, Shinichiro; Shin, Yonghee; Takahashi, Kiyoshi; Masui, Toshihiko; Tanaka, Akemi; Honda, Yasushi

    2014-05-01

    There are growing concerns that future food security will be negatively affected by various factors, such as changes in socioeconomic and climate conditions. The health burden attributable to childhood undernutrition is among the most severe problems related to food crisis in the world. This study assessed the health burden attributable to childhood underweight through 2050 focusing on disability-adjusted life years (DALYs), by considering the latest scenarios for climate change studies (Representative Concentration Pathways (RCPs) and Shared Socioeconomic Pathways (SSPs)) and conducting sensitivity analysis. We used three SSPs (SSP1, SSP2 and SSP3) as future population and gross domestic products (GDP), three RCPs (RCP2.6, RCP4.5 and RCP8.5) for a greenhouse gas emissions constraint, and 12 Global Circulation Models (12 GCMs) to estimate climate conditions. A regression model for estimating DALYs attributable to childhood underweight (DAtU) was developed using the relationship between DAtU and childhood stunting. A logarithmic relationship was proposed for the regression model. We combined a global computable general equilibrium model, a crop model (M-GAEZ), and two regression models to assess the future health burden. We found that i) world total DAtU decreases from 2005 by 23 ~ 60% in 2030 depending on the socioeconomic scenarios. DAtU decreases further by 2050 for SSP1 and SSP2 scenario, whereas it slightly increases for SSP3. Per capita DAtU also decreases in all regions under either scenario in 2050, but the decreases vary significantly by regions and scenarios. ii) the impact of climate change is relatively small in the framework of this study but, on the other hand, socioeconomic conditions have a great impact on the future health burden. The impact of changes in socioeconomic conditions on the health burden is greater in the regions where current health burden is high. iii) parameter uncertainty of the regression models is the second largest factor on

  15. Environmental implications of United States coal exports: a comparative life cycle assessment of future power system scenarios.

    Science.gov (United States)

    Bohnengel, Barrett; Patiño-Echeverri, Dalia; Bergerson, Joule

    2014-08-19

    Stricter emissions requirements on coal-fired power plants together with low natural gas prices have contributed to a recent decline in the use of coal for electricity generation in the United States. Faced with a shrinking domestic market, many coal companies are taking advantage of a growing coal export market. As a result, U.S. coal exports hit an all-time high in 2012, fueled largely by demand in Asia. This paper presents a comparative life cycle assessment of two scenarios: a baseline scenario in which coal continues to be burned domestically for power generation, and an export scenario in which coal is exported to Asia. For the coal export scenario we focus on the Morrow Pacific export project being planned in Oregon by Ambre Energy that would ship 8.8 million tons of Powder River Basin (PRB) coal annually to Asian markets via rail, river barge, and ocean vessel. Air emissions (SOx, NOx, PM10 and CO2e) results assuming that the exported coal is burned for electricity generation in South Korea are compared to those of a business as usual case in which Oregon and Washington's coal plants, Boardman and Centralia, are retrofitted to comply with EPA emissions standards and continue their coal consumption. Findings show that although the environmental impacts of shipping PRB coal to Asia are significant, the combination of superior energy efficiency among newer South Korean coal-fired power plants and lower emissions from U.S. replacement of coal with natural gas could lead to a greenhouse gas reduction of 21% in the case that imported PRB coal replaces other coal sources in this Asian country. If instead PRB coal were to replace natural gas or nuclear generation in South Korea, greenhouse gas emissions per unit of electricity generated would increase. Results are similar for other air emissions such as SOx, NOx and PM. This study provides a framework for comparing energy export scenarios and highlights the importance of complete life cycle assessment in

  16. Tree Simulation Techniques for Integrated Safety Assessment

    International Nuclear Information System (INIS)

    Melendez Asensio, E.; Izquierdo Rocha, J.M.; Sanchez Perez, M.; Hortal Reymundo, J.; Perez Mulas, A.

    1999-01-01

    In the development of a PSA a central role is played by the construction of the event trees that, stemming from each initiating event considered, will finally lead to the calculation of the core damage frequency (CDF). This construction is extensively done by means of expert judgement, performing simulation of the sequences only when some doubt arises (typically for small break LOCAs) using integrated codes. Transient analysis done within the framework of the PSA has important simplifications that affect the transient simulation, specially in relation with the control and protection systems, and may not identify complicated sequences. Specialised simulation tools such as RELAP5 have been used only at very specific points of the PSAs due to time and model complexity constraints. On the other hand, a large amount of work and expertise has been laid in the development of simulation tools, independently of the PSA effort. Tools simplified in the phenomena they consider, but complete in the treatment of automatic and manual control and protection systems are now available for automatic generation and testing of the sequences appearing in the Event Trees. Additionally, an increasing effort and interest has been spent in the development of efficient means for the representation of the Emergency Operating Procedures, which, incorporated into the simulating tool would make a more realistic picture of the real plant performance. At present; both types of analyses - transient and probabilistic - can converge to be able to dynamically generate an Event Tree while taking into account the actual performance of the control and protection systems of the plant and the operator actions. Such a tool would allow for an assessment of the Event Trees, and, if fed with probabilistic data, can provide results of the same nature. Key aspects of this approach that imply new theoretical as well as practical developments in addition to those traditionally covered by classical simulation

  17. The Dose Assessment in the Vault Test Case of Near-Surface Disposal Facility for Drinking Water Scenario

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Tae Hyoung; Choi, Byung Seon; Moon, Jei Kwon [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Park, Jae Woo [Jeju National University, Jeju (Korea, Republic of)

    2012-05-15

    It is generally accepted that the radionuclides contained in the radioactive wastes will be eventually released and these will be transported to the accessible environment (near-field, far-field, biosphere). Therefore, the long-term safety assessment of near-surface radioactive waste disposal should be required by modeling the expected release of radionuclides from the repository, far-field area, and biosphere. Finally, the effective dose rate should be estimated through the released radionuclides. In this study, the radiological dose was evaluated for the reference near-surface radioactive waste disposal facility in Vaalputs, South Africa, which has been selected as a part of IAEA coordinated research program on improvement of safety assessment methodologies(ISAM). The assessment of radiological dose was performed for drinking water scenario from a well. The release and transport of radionuclides in disposal system were simulated by GoldSim. This approach suggested the time variation of effective dose over long-term period. And the results from this approach were compared with another approach method for the same facility and scenario

  18. The Dose Assessment in the Vault Test Case of Near-Surface Disposal Facility for Drinking Water Scenario

    International Nuclear Information System (INIS)

    Kim, Tae Hyoung; Choi, Byung Seon; Moon, Jei Kwon; Park, Jae Woo

    2012-01-01

    It is generally accepted that the radionuclides contained in the radioactive wastes will be eventually released and these will be transported to the accessible environment (near-field, far-field, biosphere). Therefore, the long-term safety assessment of near-surface radioactive waste disposal should be required by modeling the expected release of radionuclides from the repository, far-field area, and biosphere. Finally, the effective dose rate should be estimated through the released radionuclides. In this study, the radiological dose was evaluated for the reference near-surface radioactive waste disposal facility in Vaalputs, South Africa, which has been selected as a part of IAEA coordinated research program on improvement of safety assessment methodologies(ISAM). The assessment of radiological dose was performed for drinking water scenario from a well. The release and transport of radionuclides in disposal system were simulated by GoldSim. This approach suggested the time variation of effective dose over long-term period. And the results from this approach were compared with another approach method for the same facility and scenario

  19. A Qualitative Assessment Of Diversion Scenarios For A Example Sodium Fast Reactor Using The Gen IV PR And PP Methodology

    International Nuclear Information System (INIS)

    Zentner, Michael D.

    2008-01-01

    A working group was created in 2002 by the Generation IV International Forum (GIF) for the purpose of developing an internationally accepted methodology for assessing the Proliferation Resistance of a nuclear energy system (NES) and its individual elements. A two year case study is being performed by the experts group using this methodology to assess the proliferation resistance of a hypothetical NES called the Example Sodium Fast Reactor (ESFR). This work demonstrates how the PR and PP methodology can be used to provide important information at various levels of details to NES designers, safeguard administrators and decision makers. The study analyzes the response of the complete ESFR nuclear energy system to different proliferation and theft strategies. The challenges considered include concealed diversion, concealed misuse and 'break out' strategies. This paper describes the work done in performing a qualitative assessment of concealed diversion scenarios from the ESFR.

  20. A Qualitative Assessment of Diversion Scenarios for an Example Sodium Fast Reactor Using the GEN IV PR and PP Methodology

    International Nuclear Information System (INIS)

    Zentner, Michael D.; Coles, Garill A.; Therios, Ike

    2012-01-01

    FAST REACTORS;NUCLEAR ENERGY;NUCLEAR MATERIALS MANAGEMENT;PROLIFERATION;SAFEGUARDS;THEFT; A working group was created in 2002 by the Generation IV International Forum (GIF) for the purpose of developing an internationally accepted methodology for assessing the Proliferation Resistance of a nuclear energy system (NES) and its individual elements. A two year case study is being performed by the experts group using this methodology to assess the proliferation resistance of a hypothetical NES called the Example Sodium Fast Reactor (ESFR). This work demonstrates how the PR and PP methodology can be used to provide important information at various levels of details to NES designers, safeguard administrators and decision makers. The study analyzes the response of the complete ESFR nuclear energy system to different proliferation and theft strategies. The challenges considered include concealed diversion, concealed misuse and 'break out' strategies. This paper describes the work done in performing a qualitative assessment of concealed diversion scenarios from the ESFR.

  1. Integrated assessment models of climate change. An incomplete overview

    International Nuclear Information System (INIS)

    Dowlatabadi, H.

    1995-01-01

    Integrated assessment is a trendy phrase that has recently entered the vocabulary of folks in Washington, DC and elsewhere. The novelty of the term in policy analysis and policy making circles belies the longevity of this approach in the sciences and past attempts at their application to policy issues. This paper is an attempt at providing an overview of integrated assessment with a special focus on policy motivated integrated assessments of climate change. The first section provides an introduction to integrated assessments in general, followed by a discussion of the bounds to the climate change issue. The next section is devoted to a taxonomy of the policy motivated models. Then the integrated assessment effort at Carnegie Mellon is described briefly. A perspective on the challenges ahead in successful representation of natural and social dynamics in integrated assessments of global climate change is presented in the final section. (Author)

  2. An integrated assessment of regional air pollution and climate change in Europe: findings of the AIR-CLIM project

    NARCIS (Netherlands)

    Alcamo, J.; Mayerhofer, P.; Guardans, R.; Harmelen, T. van; Minnen, J. van; Onigkeit, J.; Posch, M.; Vries, B. de

    2002-01-01

    This paper presents results of an assessment of the linkages between regional air pollution and climate change in Europe (the AIR-CLIM Project). The main research tool was an integrated modeling framework and the main product was a consistent set of long-term scenarios covering Europe between 1995

  3. Statistical downscaling of the French Mediterranean climate: assessment for present and projection in an anthropogenic scenario

    Directory of Open Access Journals (Sweden)

    C. Lavaysse

    2012-03-01

    Full Text Available The Mediterranean basin is a particularly vulnerable region to climate change, featuring a sharply contrasted climate between the North and South and governed by a semi-enclosed sea with pronounced surrounding topography covering parts of the Europe, Africa and Asia regions. The physiographic specificities contribute to produce mesoscale atmospheric features that can evolve to high-impact weather systems such as heavy precipitation, wind storms, heat waves and droughts. The evolution of these meteorological extremes in the context of global warming is still an open question, partly because of the large uncertainty associated with existing estimates produced by global climate models (GCM with coarse horizontal resolution (~200 km. Downscaling climatic information at a local scale is, thus, needed to improve the climate extreme prediction and to provide relevant information for vulnerability and adaptation studies. In this study, we investigate wind, temperature and precipitation distributions for past recent climate and future scenarios at eight meteorological stations in the French Mediterranean region using one statistical downscaling model, referred as the "Cumulative Distribution Function transform" (CDF-t approach. A thorough analysis of the uncertainty associated with statistical downscaling and bi-linear interpolation of large-scale wind speed, temperature and rainfall from reanalyses (ERA-40 and three GCM historical simulations, has been conducted and quantified in terms of Kolmogorov-Smirnov scores. CDF-t produces a more accurate and reliable local wind speed, temperature and rainfall. Generally, wind speed, temperature and rainfall CDF obtained with CDF-t are significantly similar with the observed CDF, even though CDF-t performance may vary from one station to another due to the sensitivity of the driving large-scale fields or local impact. CDF-t has then been applied to climate simulations of the 21st century under B1 and A2 scenarios

  4. DEEPENING SERVICES MARKET INTEGRATION - A CRITICAL ASSESSMENT

    Directory of Open Access Journals (Sweden)

    Jacques Pelkmans

    2007-12-01

    Full Text Available The greatest asset of the European Union is undoubtedly its internal market. However, the internal market is not completed: it suffers from a giant hole with respect to many services. The present contribution addresses the status of services in the internal market and, in particular, the horizontal liberalisation (or, the lack of it of services outside the two large sectors which greatly deepened market integration (6 modes of transport and 3 financial services markets. Because a horizontal perspective on services in the EU is still little understood, it is briefly summarized what services really are and how their regulatory logic in the internal market can help to classify them. The (strong economic case for deepening services market integration is built on recent empirical economic analysis as well as simulation. This is followed by a discussion, with flowchart, of the Bolkestein draft directive, against the backdrop of the frustrating lack of, or at best, selective progress on services for decades. A survey of economic impact studies of the draft directive is provided, too, underpinning its importance even when the infamous origin principle is taken out. Some light is subsequently shed on the tumultuous politicisation of the services debate. Emphasis is laid on the socio-economic context (which, it is submitted, sharpened the discussion at times into polarisation and a series of other factors such as the diversity of the national regulatory frameworks of services and the labour employed, the complexity of the draft directive, the potentially radical nature of the origin principle (especially for those not aware of the case law of the ECJ, the dominant role of the EP and the opportunism of leading national politicians. Finally, directive 2006/123 –meanwhile in force – is explained and briefly assessed. Apart from the conspicuous manifestation of 'Angst' in drafting the directive, the (de merits are set out. The conclusion is that a badly

  5. National and global greenhouse gas dynamics of different forest management and wood use scenarios: a model-based assessment

    International Nuclear Information System (INIS)

    Werner, Frank; Taverna, Ruedi; Hofer, Peter; Thuerig, Esther; Kaufmann, Edgar

    2010-01-01

    An increased use of wood products and an adequate management of forests can help to mitigate climate change. However, planning horizons and response time to changes in forest management are usually long and the respective GHG effects related to the use of wood depend on the availability of harvested wood. Therefore, an integral long-term strategic approach is required to formulate the most effective forest and wood management strategies for mitigating climate change. The greenhouse gas (GHG) dynamics related to the production, use and disposal of wood products are manifold and show a complex time pattern. On the one hand, wood products can be considered as a carbon pool, as is the forest itself. On the other hand, an increased use of wood can lead to the substitution of usually more energy-intense materials and to the substitution of fossil fuels when the thermal energy of wood is recovered. Country-specific import/export flows of wood products and their alternative products as well as their processing stage have to be considered if substitution effects are assessed on a national basis. We present an integral model-based approach to evaluate the GHG impacts of various forest management and wood use scenarios. Our approach allows us to analyse the complex temporal and spatial patterns of GHG emissions and removals including trade-offs of different forest management and wood use strategies. This study shows that the contributions of the forestry and timber sector to mitigate climate change can be optimized with the following key recommendations: (1) the maximum possible, sustainable increment should be generated in the forest, taking into account biodiversity conservation as well as the long-term preservation of soil quality and growth performance; (2) this increment should be harvested continuously; (3) the harvested wood should be processed in accordance with the principle of cascade use, i.e. first be used as a material as long as possible, preferably in

  6. SYSNET: A salt-site systems network model for scenario assessments

    International Nuclear Information System (INIS)

    Reeves, M.; Banda, R.S.

    1986-12-01

    This document contains a description of the initial version of the systems model SYSNET. This model is being developed to analyze potentially disruptive scenarios of salt repository systems. Currently the model features a general three-dimensional network topology and simulates the processes of flow, heat transport in rock, heat transport in fluid, brine transport, salt creep dissolution, and precipitation. Of necessity, the SYSNET Code uses relatively simple semi-analytic algorithms so that it may be implemented statistically. Uncertain parameters may be sampled with a compatible preprocessor and then analyzed statistically with a compatible postprocessor. When used in this fashion, SYSNET may be caused to calculate distributions of various performance measures and sensitivities of performance measures to uncertain parameters. The ultimate objective of the SYSNET development is to prioritize data needs by computing sensitivities relative to a particular performance measure, namely the 10,000-year cumulative release, and to evaluate repository systems for compliance with the US Environmental Protection Agency (EPA) Standard. 16 refs., 25 figs., 31 tabs

  7. Serviceability Assessment for Cascading Failures in Water Distribution Network under Seismic Scenario

    Directory of Open Access Journals (Sweden)

    Qing Shuang

    2016-01-01

    Full Text Available The stability of water service is a hot point in industrial production, public safety, and academic research. The paper establishes a service evaluation model for the water distribution network (WDN. The serviceability is measured in three aspects: (1 the functionality of structural components under disaster environment; (2 the recognition of cascading failure process; and (3 the calculation of system reliability. The node and edge failures in WDN are interrelated under seismic excitations. The cascading failure process is provided with the balance of water supply and demand. The matrix-based system reliability (MSR method is used to represent the system events and calculate the nonfailure probability. An example is used to illustrate the proposed method. The cascading failure processes with different node failures are simulated. The serviceability is analyzed. The critical node can be identified. The result shows that the aged network has a greater influence on the system service under seismic scenario. The maintenance could improve the antidisaster ability of WDN. Priority should be given to controlling the time between the initial failure and the first secondary failure, for taking postdisaster emergency measures within this time period can largely cut down the spread of cascade effect in the whole WDN.

  8. Energy assessment of second generation (2G) ethanol production from wheat straw in Indian scenario.

    Science.gov (United States)

    Mishra, Archana; Kumar, Akash; Ghosh, Sanjoy

    2018-03-01

    Impact of second-generation ethanol (2G) use in transportation sector mainly depends upon energy efficiency of entire production process. The objective of present study was to determine energy efficiency of a potential lignocellulosic feedstock; wheat straw and its conversion into cellulosic ethanol in Indian scenario. Energy efficiency was determined by calculating Net energy ratio (NER), i.e. ratio of output energy obtained by ethanol and input energy used in ethanol production. Energy consumption and generation at each step is calculated briefly (11,837.35 MJ/ha during Indian dwarf irrigated variety of wheat crop production and 7.1148 MJ/kg straw during ethanol production stage). Total energy consumption is calculated as 8.2988 MJ/kg straw whereas energy generation from ethanol is 15.082 MJ/kg straw; resulting into NER > 1. Major portion of agricultural energy input is contributed by diesel and fertilisers whereas refining process of wheat straw feedstock to ethanol and by-products require mainly in the form of steam and electricity. On an average, 1671.8 kg water free ethanol, 930 kg lignin rich biomass (for combustion), and 561 kg C5-molasses (for fodder) per hectare are produced. Findings of this study, net energy ratio (1.81) and figure of merit (14.8028 MJ/nil kg carbon) proves wheat straw as highest energy efficient lignocellulosic feedstock for the country.

  9. Scenario-Based Assessment of User Needs for Point-of-Care Robots.

    Science.gov (United States)

    Lee, Hyeong Suk; Kim, Jeongeun

    2018-01-01

    This study aimed to derive specific user requirements and barriers in a real medical environment to define the essential elements and functions of two types of point-of-care (POC) robot: a telepresence robot as a tool for teleconsultation, and a bedside robot to provide emotional care for patients. An analysis of user requirements was conducted; user needs were gathered and identified, and detailed, realistic scenarios were created. The prototype robots were demonstrated in physical environments for envisioning and evaluation. In all, three nurses and three clinicians participated as evaluators to observe the demonstrations and evaluate the robot systems. The evaluators were given a brief explanation of each scene and the robots' functionality. Four major functions of the teleconsultation robot were defined and tested in the demonstration. In addition, four major functions of the bedside robot were evaluated. Among the desired functions for a teleconsultation robot, medical information delivery and communication had high priority. For a bedside robot, patient support, patient monitoring, and healthcare provider support were the desired functions. The evaluators reported that the teleconsultation robot can increase support from and access to specialists and resources. They mentioned that the bedside robot can improve the quality of hospital life. Problems identified in the demonstration were those of space conflict, communication errors, and safety issues. Incorporating this technology into healthcare services will enhance communication and teamwork skills across distances and thereby facilitate teamwork. However, repeated tests will be needed to evaluate and ensure improved performance.

  10. Scenario exploration approach for performance assessment of geological disposal system (III)

    International Nuclear Information System (INIS)

    Oyamada, Kiyoshi; Ikeda, Takao

    1999-02-01

    In order to underpin and defend the definition of calculation cases and simplified PA models, we discuss a complementary approach which reverses the standard procedure of scenario development and case definition described above. We design a set of extremely flexible mathematical tools called Shadow Models' for the particular purpose of 'scanning' the whole parameter/model space which has not yet been rejected by the experts rather than scrutinizing it. The SSTM was used extensively to generate an ensemble of stochastic realizations of the possible nuclide transport behaviour within the EBS. The principal component analysis on the ensemble and the analysis of the contribution of input parameter variations to the output variations reconstructed the existing knowledge concerning the sensitivity structure for the reference cases in a more formal and quantitative way. In addition, an analysis on the subset of realizations corresponding to high peak release rate revealed a critical combination and sequence of events that could potentially lead to a significantly higher release rate than that of the reference cases. In the current financial year, the objective of the study is: (1) To extend the methodology further and develop a shadow model for nuclide transport through near-field host rock which is represented as a time-dependent channel network with dual porosity; (2) To apply the near-field shadow transport model in the stochastic mode and explore the sensitivity structure; (3) To run the near-field shadow transport model in the deterministic mode to investigate effects of some physical events. (author)

  11. A metric space for Type Ia supernova spectra: a new method to assess explosion scenarios

    Science.gov (United States)

    Sasdelli, Michele; Hillebrandt, W.; Kromer, M.; Ishida, E. E. O.; Röpke, F. K.; Sim, S. A.; Pakmor, R.; Seitenzahl, I. R.; Fink, M.

    2017-04-01

    Over the past years, Type Ia supernovae (SNe Ia) have become a major tool to determine the expansion history of the Universe, and considerable attention has been given to, both, observations and models of these events. However, until now, their progenitors are not known. The observed diversity of light curves and spectra seems to point at different progenitor channels and explosion mechanisms. Here, we present a new way to compare model predictions with observations in a systematic way. Our method is based on the construction of a metric space for SN Ia spectra by means of linear principal component analysis, taking care of missing and/or noisy data, and making use of partial least-squares regression to find correlations between spectral properties and photometric data. We investigate realizations of the three major classes of explosion models that are presently discussed: delayed-detonation Chandrasekhar-mass explosions, sub-Chandrasekhar-mass detonations and double-degenerate mergers, and compare them with data. We show that in the principal component space, all scenarios have observed counterparts, supporting the idea that different progenitors are likely. However, all classes of models face problems in reproducing the observed correlations between spectral properties and light curves and colours. Possible reasons are briefly discussed.

  12. Validation of a scenario-based assessment of critical thinking using an externally validated tool.

    Science.gov (United States)

    Buur, Jennifer L; Schmidt, Peggy; Smylie, Dean; Irizarry, Kris; Crocker, Carlos; Tyler, John; Barr, Margaret

    2012-01-01

    With medical education transitioning from knowledge-based curricula to competency-based curricula, critical thinking skills have emerged as a major competency. While there are validated external instruments for assessing critical thinking, many educators have created their own custom assessments of critical thinking. However, the face validity of these assessments has not been challenged. The purpose of this study was to compare results from a custom assessment of critical thinking with the results from a validated external instrument of critical thinking. Students from the College of Veterinary Medicine at Western University of Health Sciences were administered a custom assessment of critical thinking (ACT) examination and the externally validated instrument, California Critical Thinking Skills Test (CCTST), in the spring of 2011. Total scores and sub-scores from each exam were analyzed for significant correlations using Pearson correlation coefficients. Significant correlations between ACT Blooms 2 and deductive reasoning and total ACT score and deductive reasoning were demonstrated with correlation coefficients of 0.24 and 0.22, respectively. No other statistically significant correlations were found. The lack of significant correlation between the two examinations illustrates the need in medical education to externally validate internal custom assessments. Ultimately, the development and validation of custom assessments of non-knowledge-based competencies will produce higher quality medical professionals.

  13. Assessment of reactor vessel integrity (ARVI)

    Energy Technology Data Exchange (ETDEWEB)

    Sehgal, B.R. [Division of Nuclear Power Safety (NPS), Royal Institute of Technology (KTH), Drottning Kristinas Vaeg 33A, 10044 Stockholm (Sweden)]. E-mail: sehgal@ne.kth.se; Karbojian, A. [Division of Nuclear Power Safety (NPS), Royal Institute of Technology (KTH), Drottning Kristinas Vaeg 33A, 10044 Stockholm (Sweden); Giri, A. [Division of Nuclear Power Safety (NPS), Royal Institute of Technology (KTH), Drottning Kristinas Vaeg 33A, 10044 Stockholm (Sweden); Kymaelaeinen, O. [FortumEngNP (Finland); Bonnet, J.M. [CEA (France); Ikkonen, K. [Division of Nuclear Power Safety (NPS), Royal Institute of Technology (KTH), Drottning Kristinas Vaeg 33A, 10044 Stockholm (Sweden); Sairanen, R. [VTT (Finland); Bhandari, S. [FRAMATOME (France); Buerger, M. [USTUTT (Germany); Dienstbier, J. [NRI Rez (Czech Republic); Techy, Z. [VEIKI (Hungary); Theofanous, T. [UCSB (United States)

    2005-02-01

    The assessment of reactor vessel integrity (ARVI) project involved a total of nine organizations from Europe and USA. The work consisted of experiments and analysis development. The modeling activities in the area of structural analyses were focused on the support of EC-FOREVER experiments as well as on the exploitation of the data obtained from those experiments for modeling of creep deformation and the validation of the industry structural codes. Work was also performed for extension of melt natural convection analyses to consideration of stratification, and mixing (in the CFD codes). Other modeling activities were for (1) gap cooling CHF and (2) developing simple models for system code. Finally, the methodology and data was applied for the design of IVMR severe accident management scheme for VVER-440/213 plants. The work was broken up into five packages. They were divided into tasks, which were performed by different partners. The major experimental project continued was EC-FOREVER in which data was obtained on in-vessel melt pool coolability. In previous EC-FOREVER experiments data was obtained on melt pool natural convection and lower head creep failure and rupture. Those results obtained were related to the following issues: (1) multiaxial creep laws for different vessel steels (2) effects of penetrations, and (3) mode and location of lower head failure. The two EC-FOREVER tests reported here are related to (a) the effectiveness of gap cooling and (b) water ingression for in vessel melt coolability. Two other experimental projects were also conducted. One was the COPO experiments, which was concerned with the effects of stratification and metal layer on the thermal loads on the lower head wall during melt pool convection. The second experimental project was conducted at ULPU facility, which provided data and correlations of CHF due to the external cooling of the lower head.

  14. Assessment of the water supply:demand ratios in a Mediterranean basin under different global change scenarios and mitigation alternatives.

    Science.gov (United States)

    Boithias, Laurie; Acuña, Vicenç; Vergoñós, Laura; Ziv, Guy; Marcé, Rafael; Sabater, Sergi

    2014-02-01

    Spatial differences in the supply and demand of ecosystem services such as water provisioning often imply that the demand for ecosystem services cannot be fulfilled at the local scale, but it can be fulfilled at larger scales (regional, continental). Differences in the supply:demand (S:D) ratio for a given service result in different values, and these differences might be assessed with monetary or non-monetary metrics. Water scarcity occurs where and when water resources are not enough to meet all the demands, and this affects equally the service of water provisioning and the ecosystem needs. In this study we assess the value of water in a Mediterranean basin under different global change (i.e. both climate and anthropogenic changes) and mitigation scenarios, with a non-monetary metric: the S:D ratio. We computed water balances across the Ebro basin (North-East Spain) with the spatially explicit InVEST model. We highlight the spatial and temporal mismatches existing across a single hydrological basin regarding water provisioning and its consumption, considering or not, the environmental demand (environmental flow). The study shows that water scarcity is commonly a local issue (sub-basin to region), but that all demands are met at the largest considered spatial scale (basin). This was not the case in the worst-case scenario (increasing demands and decreasing supply), as the S:D ratio at the basin scale was near 1, indicating that serious problems of water scarcity might occur in the near future even at the basin scale. The analysis of possible mitigation scenarios reveals that the impact of global change may be counteracted by the decrease of irrigated areas. Furthermore, the comparison between a non-monetary (S:D ratio) and a monetary (water price) valuation metrics reveals that the S:D ratio provides similar values and might be therefore used as a spatially explicit metric to valuate the ecosystem service water provisioning. © 2013.

  15. Scenarios for an integrated sustainability policy - using the example of the ''Sustainable City 2030''. Vol. 4; Szenarien fuer eine integrierte Nachhaltigkeitspolitik - am Beispiel: Die nachhaltige Stadt 2030. Bd. 4. Der Szenario-Prozess - Dokumentation der Prozessergebnisse (Materialband)

    Energy Technology Data Exchange (ETDEWEB)

    Gassner, Robert [Institut fuer Zukunftsstudien und Technologiebewertung gGmbH (IZT), Berlin (Germany)

    2013-04-15

    This project was carried out by a consortium by the Institute for Futures Studies and Technology Assessment (Berlin, Federal Republic of Germany) and German Institute of Urban Affairs (Berlin, Federal Republic of Germany) in the period between December 2009 and November 2012. The project deals with the design of sustainable urban living environments. In a preliminary planning phase, the policy challenges and actors with their interests and future expectations for the project phase have been developed. In the main phase of the project, a systematic, participatory scenario process is used. In this, first normative scenarios for the Sustainable City 2030 Council were developed. From this, options for action, elements of strategy and practical networking approaches for integrated sustainability policies were derived and substantiated with respect to the operational implementation and practical cooperation in the environmental department.

  16. A stochastic Forest Fire Model for future land cover scenarios assessment

    Directory of Open Access Journals (Sweden)

    M. D'Andrea

    2010-10-01

    Full Text Available Land cover is affected by many factors including economic development, climate and natural disturbances such as wildfires. The ability to evaluate how fire regimes may alter future vegetation, and how future vegetation may alter fire regimes, would assist forest managers in planning management actions to be carried out in the face of anticipated socio-economic and climatic change. In this paper, we present a method for calibrating a cellular automata wildfire regime simulation model with actual data on land cover and wildfire size-frequency. The method is based on the observation that many forest fire regimes, in different forest types and regions, exhibit power law frequency-area distributions. The standard Drossel-Schwabl cellular automata Forest Fire Model (DS-FFM produces simulations which reproduce this observed pattern. However, the standard model is simplistic in that it considers land cover to be binary – each cell either contains a tree or it is empty – and the model overestimates the frequency of large fires relative to actual landscapes. Our new model, the Modified Forest Fire Model (MFFM, addresses this limitation by incorporating information on actual land use and differentiating among various types of flammable vegetation. The MFFM simulation model was tested on forest types with Mediterranean and sub-tropical fire regimes. The results showed that the MFFM was able to reproduce structural fire regime parameters for these two regions. Further, the model was used to forecast future land cover. Future research will extend this model to refine the forecasts of future land cover and fire regime scenarios under climate, land use and socio-economic change.

  17. An assessment of the radiological scenario around uranium mines in Singhbhum East district, Jharkhand, India.

    Science.gov (United States)

    Tripathi, R M; Sahoo, S K; Mohapatra, S; Patra, A C; Lenka, P; Dubey, J S; Jha, V N; Puranik, V D

    2012-07-01

    The present work deals with the prevalent radiological scenario around uranium-mining sites in the Singhbhum East district of Jharkhand state, India. The concentration of naturally occurring radioactive materials (NORMs) was estimated from 27 soil samples collected around three regions in the study area, namely Bagjata, Turamdih and Jaduguda. The mean activity concentrations of (238)U in Bagjata, Turamdih and Jaduguda regions were found to be 128.6, 95.7 and 49.2 Bq kg(-1), respectively. Similarly for (232)Th and (40)K the activity concentrations were found to be 57.3, 78.4, 68.9 and 530, 425 and 615 Bq kg(-1) in the Bagjata, Turamdih and Jaduguda regions, respectively, which are comparable with other reported values worldwide, except for some high values. The calculated gamma dose rate, obtained from the concentrations of (238)U, (232)Th and (40)K in the samples, was compared with the observed dose rate in air. A good correlation (0.96) was observed between the calculated and the observed gamma dose rate. The annual outdoor effective dose rate was estimated and the values falls between 0.04-0.3, 0.07-0.3 and 0.07-.14 mSv y(-1) with mean values of 0.14, 0.12 and 0.11 mSv y(-1) for the Bagjata, Turamdih and Jaduguda regions, respectively. The terrestrial dose rates in all the three regions are comparable with other reported values worldwide, except for a few high values in Greece, Rio Grande Do Norte (Brazil) and Kalpakkam (India).

  18. Development of Integrated Code for Risk Assessment (INCORIA) for Physical Protection System

    International Nuclear Information System (INIS)

    Jang, Sung Soon; Seo, Hyung Min; Yoo, Ho Sik

    2010-01-01

    A physical protection system (PPS) integrates people, procedures and equipment for the protection of assets or facilities against theft, sabotage or other malevolent human attacks. Among critical facilities, nuclear facilities and nuclear weapon sites require the highest level of PPS. After the September 11, 2001 terrorist attacks, international communities, including the IAEA, have made substantial efforts to protect nuclear material and nuclear facilities. The international flow on nuclear security is using the concept or risk assessment. The concept of risk assessment is firstly devised by nuclear safety people. They considered nuclear safety including its possible risk, which is the frequency of failure and possible consequence. Nuclear security people also considers security risk, which is the frequency of threat action, vulnerability, and consequences. The concept means that we should protect more when the credible threat exists and the possible radiological consequence is high. Even if there are several risk assessment methods of nuclear security, the application needs the help of tools because of a lot of calculation. It's also hard to find tools for whole phase of risk assessment. Several codes exist for the part of risk assessment. SAVI are used for vulnerability of PPS. Vital area identification code is used for consequence analysis. We are developing Integrated Code for Risk Assessment (INCORIA) to apply risk assessment methods for nuclear facilities. INCORIA evaluates PP-KINAC measures and generation tools for threat scenario. PP-KINAC is risk assessment measures for physical protection system developed by Hosik Yoo and is easy to apply. A threat scenario tool is used to generate threat scenario, which is used as one of input value to PP-KINAC measures

  19. Effect of Engaging Trainees by Assessing Peer Performance: A Randomised Controlled Trial Using Simulated Patient Scenarios

    Directory of Open Access Journals (Sweden)

    Charlotte Loumann Krogh

    2014-01-01

    Full Text Available Introduction. The aim of this study was to explore the learning effect of engaging trainees by assessing peer performance during simulation-based training. Methods. Eighty-four final year medical students participated in the study. The intervention involved trainees assessing peer performance during training. Outcome measures were in-training performance and performance, both of which were measured two weeks after the course. Trainees’ performances were videotaped and assessed by two expert raters using a checklist that included a global rating. Trainees’ satisfaction with the training was also evaluated. Results. The intervention group obtained a significantly higher overall in-training performance score than the control group: mean checklist score 20.87 (SD 2.51 versus 19.14 (SD 2.65 P=0.003 and mean global rating 3.25 SD (0.99 versus 2.95 (SD 1.09 P=0.014. Postcourse performance did not show any significant difference between the two groups. Trainees who assessed peer performance were more satisfied with the training than those who did not: mean 6.36 (SD 1.00 versus 5.74 (SD 1.33 P=0.025. Conclusion. Engaging trainees in the assessment of peer performance had an immediate effect on in-training performance, but not on the learning outcome measured two weeks later. Trainees had a positive attitude towards the training format.

  20. Method for assessing wind power integration in a hydro based power system

    International Nuclear Information System (INIS)

    Norheim, I.; Palsson, M.; Tande, J.O.G.; Uhlen, K.

    2006-01-01

    The present paper demonstrates a method for assessment of how much wind power that can be integrated in a system with limited transmission capacity. Based on hydro inflow data and wind measurements (for different locations of planned wind farms in an area) it is possible to assess how much wind power that can be fed into a certain point in the transmission network without violating the transmission capacity limits. The proposed method combines the use of market modelling and detailed network analysis in order to assess the probability of network congestions rather than focusing on extreme cases. By computing the probability distribution of power flow on critical corridors in the grid it is possible to assess the likelihood of network congestions and the amount of energy that must be curtailed to fulfil power system security requirements (n-1). This way the assessment is not only made of worst case scenarios, assuming maximal flow from hydro plants and maximal wind power production. As extreme case scenarios are short term and may be solved by market mechanisms or automatic system protection schemes (disconnection of wind power or hydro power), the proposed method may reveal that it would be economic to install more wind power than if only based on analysis of worst case scenarios. (orig.)

  1. Life Cycle Assessment of Biogas Production from Marine Macroalgae: a Latvian Scenario

    Science.gov (United States)

    Pilicka, Iluta; Blumberga, Dagnija; Romagnoli, Francesco

    2011-01-01

    There is potential environmental benefit to be gained from the use of algae because of their ability to fix CO2, no need for direct land use and utilization of bio-waste (rich in potassium, phosphate and nitrogen based compounds) as a nutrients. The aim of the research is to assess the impact of biogas production and the final use in a cogeneration unit system from a Life Cycle Assessment (LCA) in comparison with a similar reference system using a non-renewable source (e.g. natural gas). The paper is intended to be a preliminary study for understanding the implementation of this novel technology in a Latvian context.

  2. JAXA's Space Exploration Scenario

    Science.gov (United States)

    Sato, N. S.

    2018-04-01

    Japan Aerospace Exploration Agency (JAXA) has been studying space exploration scenario, including human exploration for Japan since 2015, which encompasses goals, knowledge gap assessment, and architecture. assessment, and technology roadmap.

  3. Scenarios of long-term farm structural change for application in climate change impact assessment

    NARCIS (Netherlands)

    Mandryk, M.; Reidsma, P.; Ittersum, van M.K.

    2012-01-01

    Towards 2050, climate change is one of the possible drivers that will change the farming landscape, but market, policy and technological development may be at least equally important. In the last decade, many studies assessed impacts of climate change and specific adaptation strategies. However,

  4. Waste management in the Irkutsk region, Siberia, Russia: An environmental assessment of alternative development scenarios

    DEFF Research Database (Denmark)

    Starostina, Vlada; Damgaard, Anders; Eriksen, Marie Kampmann

    2018-01-01

    The current waste management system, handling around 500,000 t of household, commercial, and institutional waste annually in the Irkutsk region, Siberia, is based on landfilling in an old landfill with no controls of leachate and gas. Life-cycle assessment modelling of the current system shows th...

  5. Assessment of irrigated maize yield response to climate change scenarios in Portugal

    NARCIS (Netherlands)

    Yang, Chenyao; Fraga, Helder; Ieperen, van W.; Andrade Santos, João

    2017-01-01

    Maize is an important crop for the Portuguese agricultural sector. Future climate change, with warmer and dryer conditions in this Mediterranean environment, will challenge this high-water demanding crop. The present study aims at assessing the response of maize yield, growth cycle, seasonal water

  6. AN ASSESSMENT OF THE INTEGRATED PEST MANAGEMENT ...

    African Journals Online (AJOL)

    Integrated Pest Management Collaborative Research Support Program) has been applying a farmer participatory IPM strategy at on-farm research sites in eastern Uganda since 1995. Following five years of project implementation an evaluation ...

  7. Simulating and evaluating best management practices for integrated landscape management scenarios in biofuel feedstock production: Evaluating Best Management Practices for Biofuel Feedstock Production

    Energy Technology Data Exchange (ETDEWEB)

    Ha, Miae [Argonne National Laboratory, Lemont IL 60439 USA; Wu, May [Argonne National Laboratory, Lemont IL 60439 USA

    2015-09-08

    Sound crop and land management strategies can maintain land productivity and improve the environmental sustainability of agricultural crop and feedstock production. This study evaluates the improvement of water sustainability through an integrated landscaping management strategy, where landscaping design, land management operations, crop systems, and agricultural best management practices (BMPs) play equal roles. The strategy was applied to the watershed of the South Fork Iowa River in Iowa, with a focus on implementing riparian buffers and converting low productivity land to provide cellulosic biomass while benefiting soil and water quality. The Soil and Water Assessment Tool (SWAT) was employed to simulate the impact of integrated landscape design on nutrients, suspended sediments, and flow on the watershed and subbasin scales. First, the study evaluated the representation of buffer strip as a vegetative barrier and as a riparian buffer using trapping efficiency and area ratio methods in SWAT. For the riparian buffer, the area ratio method tends to be more conservative, especially in nitrate loadings, while the trapping efficiency method generates more optimistic results. The differences between the two methods increase with buffer width. The two methods may not be comparable for the field-scale vegetative barrier simulation because of limitations in model spatial resolution. Landscape scenarios were developed to quantify water quality under (1) current land use, (2) partial land conversion to switchgrass, and (3) riparian buffer implementation. Results show that when low productivity land (15.2% of total watershed land area) is converted to grow switchgrass, suspended sediment, total nitrogen, total phosphorus, and nitrate loadings are reduced by 69.3%, 55.5%, 46.1%, and 13.4%, respectively, in the watershed surface streams. The reduction was less extensive when riparian buffer strips (30 m or 50 m) were applied to the stream network at 1.4% of total land area

  8. Uncertainty of fast biological radiation dose assessment for emergency response scenarios.

    Science.gov (United States)

    Ainsbury, Elizabeth A; Higueras, Manuel; Puig, Pedro; Einbeck, Jochen; Samaga, Daniel; Barquinero, Joan Francesc; Barrios, Lleonard; Brzozowska, Beata; Fattibene, Paola; Gregoire, Eric; Jaworska, Alicja; Lloyd, David; Oestreicher, Ursula; Romm, Horst; Rothkamm, Kai; Roy, Laurence; Sommer, Sylwester; Terzoudi, Georgia; Thierens, Hubert; Trompier, Francois; Vral, Anne; Woda, Clemens

    2017-01-01

    Reliable dose estimation is an important factor in appropriate dosimetric triage categorization of exposed individuals to support radiation emergency response. Following work done under the EU FP7 MULTIBIODOSE and RENEB projects, formal methods for defining uncertainties on biological dose estimates are compared using simulated and real data from recent exercises. The results demonstrate that a Bayesian method of uncertainty assessment is the most appropriate, even in the absence of detailed prior information. The relative accuracy and relevance of techniques for calculating uncertainty and combining assay results to produce single dose and uncertainty estimates is further discussed. Finally, it is demonstrated that whatever uncertainty estimation method is employed, ignoring the uncertainty on fast dose assessments can have an importa