WorldWideScience

Sample records for instructional system design

  1. General Systems Theory and Instructional Systems Design.

    Science.gov (United States)

    Salisbury, David F.

    1990-01-01

    Describes basic concepts in the field of general systems theory (GST) and identifies commonalities that exist between GST and instructional systems design (ISD). Models and diagrams that depict system elements in ISD are presented, and two matrices that show how GST has been used in ISD literature are included. (11 references) (LRW)

  2. A Symbiosis between Instructional Systems Design and Project Management

    Science.gov (United States)

    Pan, Cheng-Chang

    2012-01-01

    This study is intended to explore a complementary relationship between instructional systems design (ISD) and project management in an attempt to build a plausible case for integrating project management as a distinct course in the core of the graduate instructional systems design programs. It is argued that ISD and project management should form…

  3. MVP and Instructional Systems Design in Online Courses

    Science.gov (United States)

    Franklin, Jennifer L.

    2017-01-01

    This chapter is based on three premises. The first premise is that the use of instructional systems design (ISD) methods is important in online as well as traditional classroom settings. A second premise is that improving the motivational design of instruction brings benefits to teachers and learners alike. The third premise, specific to this…

  4. A Critical Review of Instructional Design Process of Distance Learning System

    Science.gov (United States)

    Chaudry, Muhammad Ajmal; ur-Rahman, Fazal

    2010-01-01

    Instructional design refers to planning, development, delivery and evaluation of instructional system. It is an applied field of study aiming at the application of descriptive research outcomes in regular instructional settings. The present study was designed to critically review the process of instructional design at Allama Iqbal Open University…

  5. General Systems Theory and Instructional Design.

    Science.gov (United States)

    Salisbury, David F.

    The use of general systems theory in the field of instructional systems design (ISD) is explored in this paper. Drawing on work by Young, the writings of 12 representative ISD writers and researchers were surveyed to determine the use of 60 general systems theory concepts by the individual authors. The average number of concepts used by these…

  6. Intelligent Frameworks for Instructional Design.

    Science.gov (United States)

    Spector, J. Michael; And Others

    1992-01-01

    Presents a taxonomy describing various uses of artificial intelligence techniques in automated instructional development systems. Instructional systems development is discussed in relation to the design of computer-based instructional courseware; two systems being developed at the Air Force Armstrong Laboratory are reviewed; and further research…

  7. A Virtual Library for Instructional Systems Designers.

    Science.gov (United States)

    Kirk, James J.

    During the past three years, the role of the instructional systems designer has taken on greater significance for instructors. This is because many faculty members have been asked to put their entire courses online over the World Wide Web. Instructors are now creating a substantial percentage of the online courses with little or no background in…

  8. A CRITICAL REVIEW OF INSTRUCTIONAL DESIGN PROCESS OF DISTANCE LEARNING SYSTEM

    Directory of Open Access Journals (Sweden)

    Muhammad Ajmal CHAUDRY

    2010-07-01

    Full Text Available Instructional design refers to planning, development, delivery and evaluation of instructional system. It is an applied field of study aiming at the application of descriptive research outcomes in regular instructional settings. The present study was designed to critically review the process of instructional design at Allama Iqbal Open University (AIOU. It was survey study. Population of the study consisted of 120 academicians of different academic department of AIOU. Survey was conducted through questionnaire for academic staff. It was revealed that need assessment is not done before conceiving the outlines of a course. Also the course did not contain sufficient activities, picture and illustrations. It was also found that did not confirm the course objectives. The study recommended that proper of the course writers for distance learning may be arranged.

  9. What Should Instructional Designers Know about General Systems Theory?

    Science.gov (United States)

    Salisbury, David F.

    1989-01-01

    Describes basic concepts in the field of general systems theory (GST) and explains the relationship between instructional systems design (ISD) and GST. Benefits of integrating GST into the curriculum of ISD graduate programs are discussed, and a short bibliography on GST is included. (LRW)

  10. INSTRUCTIONAL SYSTEMS DESIGN (ISD: Theory and Practice in Second Life

    Directory of Open Access Journals (Sweden)

    Nil GOKSEL CANBEK

    2011-08-01

    Full Text Available The considerable changes in distance learning related technologies and Web 2.0 tools direct new immersive platforms to serve on the concept of avatar-driven interactions. In this sense, the immersive learning platforms, like Second Life (SL, embrace innovative forms of network based settings for effective community interactions. SL, as an interactive learning milieu, conducts 3D interactions and active education within the context of Instructional Systems Design (ISD which makes learning experiences efficient for both the tutor and learners on the platform designed on social networking. The platform gives an appropriate service to its users to be part of an instructional application of virtual worlds in where learners become connected though online activities. Within the learning theories existing nowadays, instructional designers, who are working in 3D environment like SL, are using mainly cognitive theory and constructivist strategy of learning. According to cognitive learning theory, people learn in different ways that are individually contextual and new trends in Instructional Design (ID had to address these differences. There are number of already approbated instructional models, which are used widely in the process of creation learning courses for 3D environments. The most frequently used model is ADDIE (Assess–Design–Develop–Implement– Evaluate, and the model PIE (Plan-Integrate–Evaluate, that is relatively new and become increasingly popular as it allows easy integration of technology in the classroom-oriented (virtual or real teaching. Based on the above mentioned concerns, this paper will examine the instructional design models used to create immersive courses within SL. Further, the paper will collect ideas on the instructional tools and technologies used for designing SL courses as these new technologies used in this environment draws heavily on andragogy. The paper will also clarify the obstacles on virtual learning

  11. Rapid Prototyping: An Alternative Instructional Design Strategy.

    Science.gov (United States)

    Tripp, Steven D.; Bichelmeyer, Barbara

    1990-01-01

    Discusses the nature of instructional design and describes rapid prototyping as a feasible model for instructional system design (ISD). The use of prototyping in software engineering is described, similarities between software design and instructional design are discussed, and an example is given which uses rapid prototyping in designing a…

  12. Training in Japan: The Use of Instructional Systems Design.

    Science.gov (United States)

    Taguchi, Mina; Keller, John M.

    This study investigated the kinds of training conducted in Japanese companies and the degree to which instructional systems design (ISD) is implemented. A random sample of 12 Japanese companies in the banking, automobile manufacturing, electrical machinery, wholesale stores, insurance and securities, and transportation industries were surveyed; a…

  13. [Participants-centered Design of Annual Meeting: From the Perspectives of Instructional Systems].

    Science.gov (United States)

    Suzuki, Katsuaki

    2018-01-01

     This paper examines the reform experience of the 10th Annual Meeting of the Japanese Society for Pharmaceutical Palliative Care and Sciences from Instructional Systems perspectives, to check whether it was effective, efficient, and appealing for participants. "Instructional Systems" has been a research area in educational technology for the past 50 years, and has also been applied to training and human resource development in healthcare domains. If an annual meeting is to be designed for participants' learning, then perspectives of Instructional Systems can be applied to interpret the effort of the reform. First, fill in the gaps of participants' knowledge, using before-and-after comparison. Design a conference to meet the needs of its participants by checking why they attend (expectations) and what they bring in (starting status). Second, design the conference as a process of innovation. The bigger the expected changes, the more carefully participants should be prepared to accommodate them. Third, follow plan-do-check-action cycles with data for confirming and revising the new ways of running the meeting. Plan to check "exportability" of the new ways, to assess whether it can be generalized to future meetings.

  14. Computer Assisted Instructional Design for Computer-Based Instruction. Final Report. Working Papers.

    Science.gov (United States)

    Russell, Daniel M.; Pirolli, Peter

    Recent advances in artificial intelligence and the cognitive sciences have made it possible to develop successful intelligent computer-aided instructional systems for technical and scientific training. In addition, computer-aided design (CAD) environments that support the rapid development of such computer-based instruction have also been recently…

  15. Universal Design for Instruction: Extending the Universal Design Paradigm to College Instruction

    Science.gov (United States)

    McGuire, Joan M.; Scott, Sally S.

    2006-01-01

    Universal design for instruction (UDI) represents the systematic application of universal design, the construct from architecture and product development, to instructional practices in higher education. In addition to a description of the deliberative process by which UDI was developed, this article provides confirmatory evidence of the validity…

  16. Designing Instructional Materials: Some Guidelines.

    Science.gov (United States)

    Burbank, Lucille; Pett, Dennis

    Guidelines for the design of instructional materials are outlined in this paper. The principles of design are presented in five major categories: (1) general design (structural appeal and personal appeal); (2) instructional design (attention, memory, concept learning, and attitude change); (3) visual design (media considerations, pictures, graphs…

  17. A Content Analysis of Instructional Design and Web Design Books: Implications for Inclusion of Web Design in Instructional Design Textbooks

    Science.gov (United States)

    Obilade, Titilola T.; Burton, John K.

    2015-01-01

    This textual content analysis set out to determine the extent to which the theories, principles, and guidelines in 4 standard books of instructional design and technology were also addressed in 4 popular books on web design. The standard books on instructional design and the popular books on web design were chosen by experts in the fields. The…

  18. Modelling Web-Based Instructional Systems

    NARCIS (Netherlands)

    Retalis, Symeon; Avgeriou, Paris

    2002-01-01

    The size and complexity of modern instructional systems, which are based on the World Wide Web, bring about great intricacy in their crafting, as there is not enough knowledge or experience in this field. This imposes the use of new instructional design models in order to achieve risk-mitigation,

  19. Social Ecology and Worksite Training and Development: Introducing the Social in Instructional System Design

    Science.gov (United States)

    Weinstein, Marc G.; Shuck, Brad

    2011-01-01

    Human resource development (HRD) is recognized as an interdisciplinary field covering the breadth of behavioral and social sciences. However, since its inception, instructional systems design (ISD), a methodology widely used in the HRD field, has been based on a narrow range of behavioral science. Grounded in general system's theory, the ISD…

  20. Investigating Peer Review as a Systemic Pedagogy for Developing the Design Knowledge, Skills, and Dispositions of Novice Instructional Design Students

    Science.gov (United States)

    Brill, Jennifer M.

    2016-01-01

    This research investigated peer review as a contemporary instructional pedagogy for fostering the design knowledge, skills, and dispositions of novice Instructional Design and Technology (IDT) professionals. Participants were graduate students enrolled in an introductory instructional design (ID) course. Survey, artifact, and observation data were…

  1. Motivational Design in Information Literacy Instruction

    Science.gov (United States)

    Hess, Amanda Nichols

    2015-01-01

    Motivational design theory complements instructional design theory and, when used together, both principles can affect learning, knowledge acquisition, and knowledge retention. In information literacy instruction, motivational design exists throughout the appropriate standards documents. However, there is limited current research on the best…

  2. A Classification Model and an Open E-Learning System Based on Intuitionistic Fuzzy Sets for Instructional Design Concepts

    Science.gov (United States)

    Güyer, Tolga; Aydogdu, Seyhmus

    2016-01-01

    This study suggests a classification model and an e-learning system based on this model for all instructional theories, approaches, models, strategies, methods, and technics being used in the process of instructional design that constitutes a direct or indirect resource for educational technology based on the theory of intuitionistic fuzzy sets…

  3. Improvement of Organizational Performance and Instructional Design: An Analogy Based on General Principles of Natural Information Processing Systems

    Science.gov (United States)

    Darabi, Aubteen; Kalyuga, Slava

    2012-01-01

    The process of improving organizational performance through designing systemic interventions has remarkable similarities to designing instruction for improving learners' performance. Both processes deal with subjects (learners and organizations correspondingly) with certain capabilities that are exposed to novel information designed for producing…

  4. Collaboration Mechanism for Equipment Instruction of Multiple Energy Systems

    Science.gov (United States)

    Wang, Dong; Wang, Tuo; Wang, Qi; Zhang, Zhao; Zhao, Mingyu; Wang, Yinghui

    2018-01-01

    When multiple energy systems execute optimization instructions simultaneously, and the same equipment is Shared, the instruction conflict may occur. Aiming at the above problems, taking into account the control objectives of each system, the characteristics of different systems, such as comprehensive clean energy, energy efficiency, and peak filling, etc., designed the instruction coordination mechanism for the daemon. This mechanism mainly acts on the main station of the system, and form a final optimization instruction. For some specific scenarios, the collaboration mechanism of unlocking the terminal is supplemented. The mechanism determines the specific execution instructions based on the arrival time of the instruction. Finally, the experiment in Tianjin eco-city shows that this algorithm can meet the instruction and collaboration requirements of multi-energy systems, and ensure the safe operation of the equipment.

  5. Demonstrating Empathy: A Phenomenological Study of Instructional Designers Making Instructional Strategy Decisions for Adult Learners

    Science.gov (United States)

    Vann, Linda S.

    2017-01-01

    Instructional designers are tasked with making instructional strategy decisions to facilitate achievement of learning outcomes as part of their professional responsibilities. While the instructional design process includes learner analysis, that analysis alone does not embody opportunities to assist instructional designers with demonstrations of…

  6. Gaming the System: Video Games as a Theoretical Framework for Instructional Design

    OpenAIRE

    Beatty, Ian D.

    2014-01-01

    In order to facilitate analyzing video games as learning systems and instructional designs as games, we present a theoretical framework that integrates ideas from a broad range of literature. The framework describes games in terms of four layers, all sharing similar structural elements and dynamics: a micro-level game focused on immediate problem-solving and skill development, a macro-level game focused on the experience of the game world and story and identity development, and two meta-level...

  7. Engaging Faculty in Telecommunications-Based Instructional Delivery Systems.

    Science.gov (United States)

    Swalec, John J.

    In the design and development of telecommunications-based instructional delivery systems, attention to faculty involvement and training is often overlooked until the system is operational. The Waubonsee Telecommunications Instructional Consortium (TIC), in Illinois, is one network that benefited from early faculty input. Even before the first…

  8. Designing Preclinical Instruction of Psychomotor Skills (IV)--Instructional Engineering: Evaluation Phase.

    Science.gov (United States)

    Guenzel, Pamela J.; And Others

    1995-01-01

    The fourth article in a four-part series on instructional design discusses evaluation of a psychomotor skills unit taught in preclinical dental education. Issues examined include piloting of instructional materials, analysis and revision of materials based on student performance, syllabus design and content, influence of faculty characteristics,…

  9. A Framework for Aligning Instructional Design Strategies with Affordances of CAVE Immersive Virtual Reality Systems

    Science.gov (United States)

    Ritz, Leah T.; Buss, Alan R.

    2016-01-01

    Increasing availability of immersive virtual reality (IVR) systems, such as the Cave Automatic Virtual Environment (CAVE) and head-mounted displays, for use in education contexts is providing new opportunities and challenges for instructional designers. By highlighting the affordances of IVR specific to the CAVE, the authors emphasize the…

  10. Instruction, Feedback and Biometrics: The User Interface for Fingerprint Authentication Systems

    Science.gov (United States)

    Riley, Chris; Johnson, Graham; McCracken, Heather; Al-Saffar, Ahmed

    Biometric authentication is the process of establishing an individual’s identity through measurable characteristics of their behaviour, anatomy or physiology. Biometric technologies, such as fingerprint systems, are increasingly being used in a diverse range of contexts from immigration control, to banking and personal computing. As is often the case with emerging technologies, the usability aspects of system design have received less attention than technical aspects. Fingerprint systems pose a number of challenges for users and past research has identified issues with correct finger placement, system feedback and instruction. This paper describes the development of an interface for fingerprint systems using an iterative, participative design approach. During this process, several different methods for the presentation of instruction and feedback were identified. The different types of instruction and feedback were tested in a study involving 82 participants. The results showed that feedback had a statistically significant effect on overall system performance, but instruction did not. The design recommendations emerging from this study, and the use of participatory design in this context, are discussed.

  11. When innovative instructional designs are too innovative

    DEFF Research Database (Denmark)

    Kjærgaard, Thomas; Wahl, Christian

    2015-01-01

    and it was developed to include, motivate and encourage the students to engage in more situated learning processes. The course is infamous for low attendance and for demotivating the students. The new instructional design utilized teacher-produced video-clips to qualify the students learning in the preparation...... for the lessons and new pedagogical activities during lessons to make the learning process more situated. The video-clips should also include more students through scaffolding the academic reading with video-clips. However, the outcome was not as planned. The students didn’t recognize the video......This paper presents a study of what happens when innovation of an instructional design is too innovative. The study investigates an implementation process of a new instructional design in nursing education. The new instructional design should be a step away for a functionalist approach to learning...

  12. Using Critical Incidents of Instructional Design and Multimedia Production Activities to Investigate Instructional Designers' Current Practices and Roles

    Science.gov (United States)

    Sugar, William A.; Luterbach, Kenneth J.

    2016-01-01

    Through consideration of critical incidents, this study analyzed 106 effective, ineffective and extraordinary instructional design and multimedia production (MP) activities discussed by 36 instructional design professionals. This evaluation provided insights into these professionals' best and not so best practices during the past 6 months.…

  13. Software Engineering Design Principles Applied to Instructional Design: What Can We Learn from Our Sister Discipline?

    Science.gov (United States)

    Adnan, Nor Hafizah; Ritzhaupt, Albert D.

    2018-01-01

    The failure of many instructional design initiatives is often attributed to poor instructional design. Current instructional design models do not provide much insight into design processes for creating e-learning instructional solutions. Given the similarities between the fields of instructional design and software engineering, instructional…

  14. DESIGNING MOTIVATIONAL LEARNING SYSTEMS IN DISTANCE EDUCATION

    Directory of Open Access Journals (Sweden)

    Jale BALABAN-SALI

    2008-07-01

    Full Text Available ABSTRACT The designing of instruction, when considered as a process, is the determination of instructional requirements of the learner and development of functional learning systems in order to meet these requirements. In fact, as a consequence of studies on the development of effective learning systems some instructional design theories have emerged. Among these theories the motivational design theory points out that instructional processes are required to be configured with the strategies which increases the attention, relevance, confidence and satisfaction of the students for an instructional design which ensures the continuity of learning motivation. The studies indicate that the systems which are developed on the basis of mentioned strategies raise the attention of the student during instruction, develop a relevance to the students’ requirements, create a positive expectation for success and help having a satisfaction by reinforcing success. In this article, the empirical studies related with this subject and the suggestions for presenting more effective motivational instructional designs in distance learning are summarized.

  15. Designing Preclinical Instruction for Psychomotor Skills (III)--Instructional Engineering: Design Phase.

    Science.gov (United States)

    Guenzel, Pamela J.; And Others

    1995-01-01

    In the third of a series of articles on teaching psychomotor skills in dental education, the design of instructional materials is discussed. Steps include identifying appropriate teaching strategies for the tasks; organizing and sequencing subskills; identifying and collecting common errors; and drafting learning exercises for each subskill. (MSE)

  16. Liberating Learning Object Design from the Learning Style of Student Instructional Designers

    Science.gov (United States)

    Akpinar, Yavuz

    2007-01-01

    Learning objects are a new form of learning resource, and the design of these digital environments has many facets. To investigate senior instructional design students' use of reflection tools in designing learning objects, a series of studies was conducted using the Reflective Action Instructional Design and Learning Object Review Instrument…

  17. Using Agile Project Management to Enhance the Performance of Instructional Design Teams

    Science.gov (United States)

    Sweeney, David S.; Cifuentes, Lauren

    2010-01-01

    Instructional design models describe in detail methodologies for designing effective instruction. Several widely adopted models include suggestions for managing instructional design projects. However, these suggestions focus on how to manage the instructional design steps rather than the instructional design and development team process. The…

  18. Wisconsin System for Instructional Management: Terminal Operator Manual. Practical Paper No. 19.

    Science.gov (United States)

    Bozeman, William C.; And Others

    The Wisconsin System for Instructional Management (WIS-SIM) is a computer managed instruction (CMI) system designed to improve instructional decision making in order to maximize the educational progress of each child while making efficient use of the available human, material, and financial resources within an organizational structure such as the…

  19. Issues in Software Engineering of Relevance to Instructional Design

    Science.gov (United States)

    Douglas, Ian

    2006-01-01

    Software engineering is popularly misconceived as being an upmarket term for programming. In a way, this is akin to characterizing instructional design as the process of creating PowerPoint slides. In both these areas, the construction of systems, whether they are learning or computer systems, is only one part of a systematic process. The most…

  20. Investigating Instructional Design Management and Leadership Competencies--A Delphi Study

    Science.gov (United States)

    Gardner, Joel; Chongwony, Lewis; Washington, Tawana

    2018-01-01

    Research in instructional design and educational technology journals typically focuses on the theories, technologies, and processes related to practice of instructional design. There is little research emphasis, however, on leadership and management of instructional design in higher education. Investigating the competencies associated with…

  1. Natural Resource Information System. Volume 2: System operating procedures and instructions

    Science.gov (United States)

    1972-01-01

    A total computer software system description is provided for the prototype Natural Resource Information System designed to store, process, and display data of maximum usefulness to land management decision making. Program modules are described, as are the computer file design, file updating methods, digitizing process, and paper tape conversion to magnetic tape. Operating instructions for the system, data output, printed output, and graphic output are also discussed.

  2. Design of the RISC-V Instruction Set Architecture

    OpenAIRE

    Waterman, Andrew Shell

    2016-01-01

    The hardware-software interface, embodied in the instruction set architecture (ISA), is arguably the most important interface in a computer system. Yet, in contrast to nearly all other interfaces in a modern computer system, all commercially popular ISAs are proprietary. A free and open ISA standard has the potential to increase innovation in microprocessor design, reduce computer system cost, and, as Moore’s law wanes, ease the transition to more specialized computational devices.In this d...

  3. Instruction manual for operating the Sensys System for temporary traffic counts

    Science.gov (United States)

    2010-01-01

    This instruction manual provides information and the procedures for using the Sensys System, which was initially designed to operate in a server controlled network, for temporary traffic counts. The instructions will allow the user to fully understan...

  4. Identifying Instructional Strategies Used to Design Mobile Learning in a Corporate Setting

    Science.gov (United States)

    Jackson-Butler, Uletta

    2016-01-01

    The purpose of this qualitative embedded multiple case study was to describe what instructional strategies corporate instructional designers were using to design mobile learning and to understand from their experiences which instructional strategies they believed enhance learning. Participants were five instructional designers who were actively…

  5. Instructional Style Meets Classroom Design.

    Science.gov (United States)

    Novelli, Joan

    1991-01-01

    Nine elementary teachers explain how they design their classrooms to match and support their instructional styles. The teachers focus on whole language programs, student portfolios, science activity set-ups, technology transformation, learning center strategies, and space utilization. (SM)

  6. Gestalt Theory and Instructional Design.

    Science.gov (United States)

    Moore, Patrick; Fitz, Chad

    1993-01-01

    Offers a brief overview of Gestalt theory. Shows how six Gestalt principles (proximity, closure, symmetry, figure-ground segregation, good continuation, and similarity) can be applied to improve a reader's comprehension of a badly designed instruction module that uses several graphics. (SR)

  7. DESIGNING INSTRUCTION FOR THE TRADITIONAL, ADULT, AND DISTANCE LEARNER: A New Engine for Technology-Based Teaching

    Directory of Open Access Journals (Sweden)

    Lawrence A. Tomei

    2011-10-01

    Full Text Available Adult students demand a wider variety of instructional strategies that encompass real-world, interactive, cooperative, and discovery learning experiences.Designing Instruction for the Traditional, Adult, and Distance Learner: A New Engine for Technology-Based Teaching explores how technology impacts the process of devising instructional plans as well as learning itself in adult students. Containing research from leading international experts, this publication proposes realistic and accurate archetypes to assist educators in incorporating state-of-the-art technologies into online instruction.This text proposes a new paradigm for designing, developing, implementing, and assessed technology-based instruction. It addresses three target populations of today's learner: traditional, adult, and distance education. The text proposes a new model of instructional system design (ISD for developing effective technology-based education that involves a five-step process focusing on the learner, learning theories, resources, delivery modalities, and outcomes.

  8. A Model for Designing Library Instruction for Distance Learning

    Science.gov (United States)

    Rand, Angela Doucet

    2013-01-01

    Providing library instruction in distance learning environments presents a unique set of challenges for instructional librarians. Innovations in computer-mediated communication and advances in cognitive science research provide the opportunity for designing library instruction that meets a variety of student information seeking needs. Using a…

  9. What Do Instructional Designers in Higher Education Really Do?

    Science.gov (United States)

    Kumar, Swapna; Ritzhaupt, Albert

    2017-01-01

    What do instructional designers in higher education really do? With the rise in online courses and programs in higher education, this question is especially important. We interviewed eight instructional designers from across the United States using a semi-structured interview protocol. The results were analyzed using the constant comparative…

  10. Formal education of curriculum and instructional designers

    NARCIS (Netherlands)

    McKenney, Susan; Visscher-Voerman, Irene

    2013-01-01

    In practice, few researchers and designers have strong conceptual understanding of the marriage between the design discipline and scientific research traditions. Rather, most have strong exposure to either research methodologies or instructional design methods, theories and/or practices. Within the

  11. Project Management in Instructional Design: ADDIE Is Not Enough

    Science.gov (United States)

    Van Rooij, Shahron Williams

    2010-01-01

    In the digital age, instructional designers must possess both a sound instructional design knowledge base and solid project management skills that will enable them to complete courseware projects on time, on budget and in conformance with client expectations. Project management skills include the ability to apply repeatable processes, along with…

  12. Preparing Instructional Designers for Game-Based Learning: Part 2

    Science.gov (United States)

    Hirumi, Atsusi; Appelman, Bob; Rieber, Lloyd; Van Eck, Richard

    2010-01-01

    As noted in part I of this article (published in "TechTrends 54"(3)), advances in technology continue to outpace research on the design and effectiveness of instructional (digital video) games. In general, instructional designers know little about game development, commercial video game developers know little about training, education and…

  13. Making Design Decisions Visible: Applying the Case-Based Method in Designing Online Instruction

    Directory of Open Access Journals (Sweden)

    Heng Luo,

    2011-01-01

    Full Text Available The instructional intervention in this design case is a self-directed online tutorial that applies the case-based method to teach educators how to design and conduct entrepreneurship programs for elementary school students. In this article, the authors describe the major decisions made in each phase of the design and development process, explicate the rationales behind them, and demonstrate their effect on the production of the tutorial. Based on such analysis, the guidelines for designing case-based online instruction are summarized for the design case.

  14. Flexible learning and the design of instruction

    NARCIS (Netherlands)

    Collis, Betty; Nikolova, Iliana

    1998-01-01

    The paper deals with the problem of designing flexible learning and instruction. Flexibility is considered both from the learner's and the designer's perspective. The potential of telematics in the design, development and implementation of flexible and distance learning is discussed. A Method for

  15. Formal education of curriculum and instructional designers

    NARCIS (Netherlands)

    McKenney, Susan; Visscher-Voerman, Irene

    2013-01-01

    McKenney, S., & Visscher-Voerman, I. (2013). Formal education of curriculum and instructional designers. Educational Designer, 2(6). Available online: http://www.educationaldesigner.org/ed/volume2/issue6/article20/index.htm

  16. Instructional Design as Knowledge Management: A Knowledge-in-Practice Approach to Choosing Instructional Methods

    Science.gov (United States)

    McIver, Derrick; Fitzsimmons, Stacey; Flanagan, David

    2016-01-01

    Decisions about instructional methods are becoming more complex, with options ranging from problem sets to experiential service-learning projects. However, instructors not trained in instructional design may make these important decisions based on convenience, comfort, or trends. Instead, this article draws on the knowledge management literature…

  17. The Implementation of Service-Learning in Graduate Instructional Design Coursework

    Science.gov (United States)

    Stefaniak, Jill E.

    2015-01-01

    This paper describes the design of service-learning experiences with a graduate-level instructional design course. Service-learning provides students with real-life experiences in a situated-learning environment. Students were tasked with working on an instructional design project in a real-world setting to gain consultative experience. This paper…

  18. Universal Instructional Design Principles for Moodle

    Directory of Open Access Journals (Sweden)

    Tanya Elias

    2010-05-01

    Full Text Available The paper identifies a set of universal instructional design (UID principles appropriate to distance education (DE and tailored to the needs of instructional designers and instructors teaching online. These principles are then used to assess the accessibility level of a sample online course and the availability of options in its LMS platform (Moodle to increase course accessibility. Numerous accessibility-sensitive plug-in modules are found to be available to Moodle users, though relatively few features were included in the sample course analysed. This may be because they have not been made available to instructors at the institutional level. The paper offers a series of recommendations to improve the accessibility of online DE to learners with diverse abilities, disabilities, and needs.

  19. The Need for Imagination and Creativity in Instructional Design

    Science.gov (United States)

    Gibson, Pat

    2013-01-01

    The purpose of this article is to explore the need for imagination and creativity in adult education instructional design both online and face-to-face. It defines both imagination and creativity as well as provides an overview of the history of instructional design. It provides an examination of imagination and its application in educational…

  20. Networking systems design and development

    CERN Document Server

    Chao, Lee

    2009-01-01

    Effectively integrating theory and hands-on practice, Networking Systems Design and Development provides students and IT professionals with the knowledge and skills needed to design, implement, and manage fully functioning network systems using readily available Linux networking tools. Recognizing that most students are beginners in the field of networking, the text provides step-by-step instruction for setting up a virtual lab environment at home. Grounded in real-world applications, this book provides the ideal blend of conceptual instruction and lab work to give students and IT professional

  1. A Complete Interactive Graphical Computer-Aided Instruction System.

    Science.gov (United States)

    Abrams, Steven Selby

    The use of interactive graphics in computer-aided instruction systems is discussed with emphasis placed on two requirements of such a system. The first is the need to provide the teacher with a useful tool with which to design and modify teaching sessions tailored to the individual needs and capabilities of the students. The second is the…

  2. Instructional psychology and the design of training simulators

    International Nuclear Information System (INIS)

    Stammers, R.B.

    1985-01-01

    In this paper the role of instructional psychology in simulator design and use is discussed. It is suggested that research and development work has tended to focus upon the face validity of simulators rather than their instructional utility. Dimensions of simulation are reviewed as are the variety of uses to which a simulator may be put. The nature of instructional psychology is briefly described under the following headings: task analysis, the acquisition of knowledge and skill and theories of instruction. Attention is also given to the potential role of computer-based training and the topic of retention of training is introduced. (author)

  3. Educating Instructional Designers: Different Methods for Different Outcomes.

    Science.gov (United States)

    Rowland, Gordon; And Others

    1994-01-01

    Suggests new methods of teaching instructional design based on literature reviews of other design fields including engineering, architecture, interior design, media design, and medicine. Methods discussed include public presentations, visiting experts, competitions, artifacts, case studies, design studios, and internships and apprenticeships.…

  4. Universal Design for Instruction: The Paradigm, Its Principles, and Products for Enhancing Instructional Access

    Science.gov (United States)

    McGuire, Joan M.; Scott, Sally S.; Shaw, Stan F.

    2003-01-01

    Universal Design for Instruction (UDI), a construct that serves as the foundation for the work of a federally funded project at the University of Connecticut, offers an approach to inclusive instruction that is responsive to the diverse learning needs of a changing postsecondary population. In this article elements relating to the implementation…

  5. Human Factors Considerations in the Design of Systems of Computer Managed Instruction

    Science.gov (United States)

    Bozeman, William C.

    1978-01-01

    The findings of this study indicate that a significant portion of the wide variance in the success of the implementation of the Wisconsin System for Instructional Management is attributable to the psychological type of the user. (Author/IRT)

  6. AN INSTRUCTIONAL DESIGN MODEL FOR BLENDED HIGHER EDUCATION

    Directory of Open Access Journals (Sweden)

    George Hack

    2016-07-01

    Full Text Available Instructional design models that are used by many higher education institutions to guide course design are insufficient for the unique opportunities of blended learning. Many established models are not practical tools for college faculty to use independently in the design of courses. Models like A.D.D.I.E., use a linear approach that can translate more easily into practical stages of course design, yet are historically rooted in the rapid prototyping of educational technologies or for designing military training and are inadequate for the complex demands of higher education, where learning outcomes are geared toward higher order thinking, scientific/clinical reasoning, and a syntheses of ideas into new knowledge. Presented here is an instructional design model that strategically incorporates the nuances of higher education, yet is practically framed to assist faculty with design challenges.

  7. Towards an Understanding of Instructional Design Heuristics: An Exploratory Delphi Study

    Science.gov (United States)

    York, Cindy S.; Ertmer, Peggy A.

    2011-01-01

    Evidence suggests that experienced instructional designers often use heuristics and adapted models when engaged in the instructional design problem-solving process. This study used the Delphi technique to identify a core set of heuristics designers reported as being important to the success of the design process. The overarching purpose of the…

  8. Interior Design: Teacher's Instructional Guide.

    Science.gov (United States)

    Hays, Tricia

    This teacher's instructional guide, which is part of a family and consumer sciences education series focusing on a broad range of employment opportunities, is intended to assist teachers responsible for teaching one- and two-year interior design programs for Texas high school students. The following are among the items included: (1) introductory…

  9. Toward Instructional Design Principles: Inducing Faraday's Law with Contrasting Cases

    Science.gov (United States)

    Kuo, Eric; Wieman, Carl E.

    2016-01-01

    Although physics education research (PER) has improved instructional practices, there are not agreed upon principles for designing effective instructional materials. Here, we illustrate how close comparison of instructional materials could support the development of such principles. Specifically, in discussion sections of a large, introductory…

  10. Intelligent Instructional Systems in Military Training.

    Science.gov (United States)

    Fletcher, J.D.; Zdybel, Frank

    Intelligent instructional systems can be distinguished from more conventional approaches by the automation of instructional interaction and choice of strategy. This approach promises to reduce the costs of instructional materials preparation and to increase the adaptability and individualization of the instruction delivered. Tutorial simulation…

  11. When innovative instructional designs are too innovative: lack of schema

    DEFF Research Database (Denmark)

    Kjærgaard, Thomas; Wahl, Christian

    2015-01-01

    and it was developed to motivate and encourage the students to engage in more situated learning processes. The course is infamous for low attendance and for demotivating the students; hence the new instructional design should motivate students to attend the lessons and to participate. The new instructional design...

  12. Design Studios in Instructional Design and Technology: What Are the Possibilities?

    Science.gov (United States)

    Knowlton, Dave S.

    2016-01-01

    Design studios are an innovative way to educate Instructional Design and Technology (IDT) students. This article begins by addressing literature about IDT design studios. One conclusion from this literature is that IDT studios have been theoretically conceptualized. However, much of this conceptualization is insular to the field of IDT and only…

  13. Instructional Design Briefing A Brief Overview in Relation to the China COE

    Energy Technology Data Exchange (ETDEWEB)

    Osburn, Laura Ann [Los Alamos National Laboratory; Glasco, Bethany Lynn [Los Alamos National Laboratory

    2016-11-10

    This introduction provides a roadmap and guidance for the work that will be done by SMEs to prepare NDA course material to be transitioned from LANL to the China COE. It will cover the definition of instructional design; why instructional design is important; role of instructional designer vs an instructor and how they work together; and how this relates to our work in the China COE project.

  14. Librarians and Instructional Designers: Collaboration and Innovation

    Science.gov (United States)

    Eshleman, Joe; Moniz, Richard; Mann, Karen; Eshleman, Kristen

    2016-01-01

    With online education options more ubiquitous and sophisticated than ever, the need for academic librarians to be conversant with digital resources and design thinking has become increasingly important. The way forward is through collaboration with instructional designers, which allows librarians to gain a better understanding of digital resource…

  15. Impact of Instructional Design on Virtual Teamwork

    Science.gov (United States)

    Rawlings, Melody

    2012-01-01

    The purpose of this participatory action research study was to answer the following research question: How does online instructional design impact students' virtual teamwork performance? Through the lens of social constructivism, a qualitative, in-depth multi-case study design was utilized to conduct document analyses, observations, and student…

  16. The Instructed Learning of Form-Function Mappings in the English Article System

    Science.gov (United States)

    Zhao, Helen; MacWhinney, Brian

    2018-01-01

    This article analyzes the instructed learning of the English article system by second language (L2) learners. The Competition Model (MacWhinney, 1987, 2012) was adopted as the theoretical framework for analyzing the cues to article usage and for designing effective computer-based article instruction. Study 1 found that article cues followed a…

  17. Designing Technology-Enabled Instruction to Utilize Learning Analytics

    Science.gov (United States)

    Davies, Randall; Nyland, Robert; Bodily, Robert; Chapman, John; Jones, Brian; Young, Jay

    2017-01-01

    A key notion conveyed by those who advocate for the use of data to enhance instruction is an awareness that learning analytics has the potential to improve instruction and learning but is not currently reaching that potential. Gibbons (2014) suggested that a lack of learning facilitated by current technology-enabled instructional systems may be…

  18. Instructional Design: Its Relevance for CALL.

    Science.gov (United States)

    England, Elaine

    1989-01-01

    Describes an interdisciplinary (language and educational technology departments) instructional design program that is intended to develop back-up computer programs for students taking supplementary English as a second language classes. The program encompasses training programs, the psychology of screen reading, task analysis, and color cueing.…

  19. Case-Based Instructional Practices: A Multiple-Case Study from Torts, Marketing, and Online Instructional Design Classes

    Science.gov (United States)

    Jung, Ji yoon

    2017-01-01

    The purpose of this study is to provide a comprehensive account on case-based instructional practices. Semester-long participant observation records in torts, marketing, and online instructional design classes, instructor interviews, course syllabi and teaching materials were used to describe the within-class complexity of the practices in terms…

  20. PROPOSAL FOR A MOOC INSTRUCTIONAL DESIGN BASED ON THE THEORY DEVELOPMENT AND MASTERY LEARNIG

    Directory of Open Access Journals (Sweden)

    José Emilio Sánchez-García

    2016-07-01

    Full Text Available The first massive open online courses cMOOC lacked an instructional design and have now shifted to models that have an instructional design called xMOOC. This document makes a proposal instructional design for MOOC using the simplified adaptive method SAM inspired by the theory development and strategy of Mastery Learning as part of the research method based on the design of the qualitative paradigm. The results explain and justify the procedure used for the preparation of instructional design. The conclusion that has been reached is that both SAM and strategy Mastery Learning has allowed the instructional design for MOOC easily with emphasis in practice but supported with theoretical, personalized basis by tracking post and considering the learning strategy for the domain.

  1. Incorporating Kansei Engineering in Instructional Design: Designing Virtual Reality Based Learning Environments from a Novel Perspective

    Science.gov (United States)

    Chuah, Kee Man; Chen, Chwen Jen; Teh, Chee Siong

    2008-01-01

    In recent years, the application of virtual reality (VR) technology in education is rapidly gaining momentum. The educational benefits offered by such technology have prompted many educators as well as instructional designers to investigate ways to create effective and engaging VR learning. Instructional designers have examined widely the…

  2. Pilot Test and Evaluation of a System of Computer-Managed Instruction.

    Science.gov (United States)

    Spuck, Dennis W.; Bozeman, William C.

    1978-01-01

    The Wisconsin System for Instructional Management (WIS SIM) was evaluated on three dimensions (functioning, utilization, and effects) and the information gathered was classified into three types--actual, perceptual, and judgmental. The test demonstrates that a system supportive of an individualized system of education can be designed, developed,…

  3. Instruction system upon occurrence of earthquakes

    International Nuclear Information System (INIS)

    Inagaki, Masakatsu; Morikawa, Matsuo; Suzuki, Satoshi; Fukushi, Naomi.

    1987-01-01

    Purpose: To enable rapid re-starting of a nuclear reactor after earthquakes by informing various properties of encountered earthquake to operators and properly displaying the state of damages in comparison with designed standard values of facilities. Constitution: Even in a case where the maximum accelerations due to the movements of earthquakes encountered exceed designed standard values, it may be considered such a case that equipments still remain intact depending on the wave components of the seismic movements and the vibration properties inherent to the equipments. Taking notice of the fact, the instruction device comprises a system that indicates the relationship between the seismic waveforms of earthquakes being encountered and the scram setting values, a system for indicating the comparison between the floor response spectrum of the seismic waveforms of the encountered earthquakes and the designed floor response spectrum used for the design of the equipments and a system for indicating those equipments requiring inspection after the earthquakes. Accordingly, it is possible to improve the operationability upon scram of a nuclear power plant undergoing earthquakes and improve the power saving and safety by clearly defining the inspection portion after the earthquakes. (Kawakami, Y.)

  4. A Design Study of a Multimedia Instructional Grammar Program with Embedded Tracking

    Science.gov (United States)

    Koehler, Natalya A.; Thompson, Ann D.; Phye, Gary D.

    2011-01-01

    This is a design study meant to demonstrate the feasibility of integrating three rather different theoretical perspectives for future efforts in multimedia instructional design. A multimedia instructional grammar program contextualized within the teaching of English as a Second Language (ESL) was developed and evaluated. The program design was…

  5. How Instructional Systems Will Manage Learning

    Science.gov (United States)

    Flanagan, John C.

    1970-01-01

    Discusses trends toward the systems approach in education including the development of effective instructional systems in government and industry; the introduction of teaching machines, programed learning, and computer- assisted instruction; and the increase in both the amount and sophistication of educational research and development. (JF)

  6. Considerations for Designing Instructional Virtual Environments.

    Science.gov (United States)

    Dennen, Vanessa Paz; Branch, Robert C.

    Virtual reality is an immersive, interactive medium that manipulates the senses in order provide users with simulated experiences in computer-generated worlds. The visual design of virtual reality is an important issue, but literature has tended to stress the medium's instructional potential rather than setting forth a protocol for designing…

  7. Content Analysis of Research Trends in Instructional Design Models: 1999-2014

    Science.gov (United States)

    Göksu, Idris; Özcan, Kursat Volkan; Çakir, Recep; Göktas, Yuksel

    2017-01-01

    This study examines studies on instructional design models by applying content analysis. It covers 113 papers published in 44 international Social Science Citation Index (SSCI) and Science Citation Index (SCI) journals. Studies on instructional design models are explored in terms of journal of publication, preferred model, country where the study…

  8. The Value of the Operational Principle in Instructional Design

    Science.gov (United States)

    Gibbons, Andrew S.

    2009-01-01

    Formal design studies are increasing our insight into design processes, including those of instructional design. Lessons are being learned from other design fields, and new techniques and concepts can be imported as they are demonstrated effective. The purpose of this article is to introduce a design concept--the "operational principle"--for…

  9. Design Heuristics in Academic, Corporate, and Military Instruction: More Similar than Different

    Science.gov (United States)

    York, Cindy S.; Ertmer, Peggy A.

    2013-01-01

    Despite the fact that the practice of instructional design (ID) began in the U. S. military (Branson et al., 1975; Jeffrey & Bratton-Jeffrey, 2004; Reiser, 2102), there is little known regarding which design and development heuristics military instructional designers deem important to the ID process. The study reported in this article was…

  10. The Effects of a Computer-Assisted Teaching Material, Designed According to the ASSURE Instructional Design and the ARCS Model of Motivation, on Students' Achievement Levels in a Mathematics Lesson and Their Resulting Attitudes

    Science.gov (United States)

    Karakis, Hilal; Karamete, Aysen; Okçu, Aydin

    2016-01-01

    This study examined the effects that computer-assisted instruction had on students' attitudes toward a mathematics lesson and toward learning mathematics with computer-assisted instruction. The computer software we used was based on the ASSURE Instructional Systems Design and the ARCS Model of Motivation, and the software was designed to teach…

  11. Developing the conceptual instructional design with inquiry-based instruction model of secondary students at the 10th grade level on digestion system and cellular degradation issue

    Science.gov (United States)

    Rotjanakunnatam, Boonthida; Chayaburakul, Kanokporn

    2018-01-01

    The aims of this research study was to develop the conceptual instructional design with the Inquiry-Based Instruction Model (IBIM) of secondary students at the 10th grade level on Digestion System and Cellular Degradation issue using both oxygen and oxygen-degrading cellular nutrients were designed instructional model with a sample size of 45 secondary students at the 10th Grade level. Data were collected by asking students to do a questionnaire pre and post learning processes. The questionnaire consists of two main parts that composed of students' perception questionnaire and the questionnaire that asked the question answer concept for the selected questionnaire. The 10-item Conceptual Thinking Test (CTT) was assessed students' conceptual thinking evaluation that it was covered in two main concepts, namely; Oxygen degradation nutrients and degradation nutrients without oxygen. The data by classifying students' answers into 5 groups and measuring them in frequency and a percentage of students' performances of their learning pre and post activities with the Inquiry-Based Instruction Model were analyzed as a tutorial. The results of this research found that: After the learning activities with the IBIM, most students developed concepts of both oxygen and oxygen-degrading cellular nutrients in the correct, complete and correct concept, and there are a number of students who have conceptual ideas in the wrong concept, and no concept was clearly reduced. However, the results are still found that; some students have some misconceptions, such as; the concept of direction of electron motion and formation of the ATP of bioactivities of life. This cause may come from the nature of the content, the complexity, the continuity, the movement, and the time constraints only in the classroom. Based on this research, it is suggested that some students may take some time, and the limited time in the classroom to their learning activity with content creation content binding and

  12. Authenticity in the process of learning about Instructional Design

    Directory of Open Access Journals (Sweden)

    Jay R. Wilson

    2010-05-01

    Full Text Available Authentic learning is touted as a powerful learning approach, particularly in the context of problem-based learning (Savery, 2006. Teaching and learning in the area of instructional design appears to offer a strong fit between the tenets of authentic learning and the practice of instructional design. This paper details the efforts to broaden and deepen the understanding of instructional design through a service learning approach to teaching, emphasizing authentic learning and assessment. Students are teamed and assigned to an actual contract with an external client under the supervision of the instructor who acts as project manager for the group. Contracts are negotiated to deliberately offer instructional design services to clients who would not otherwise be able to afford them, such as community-based non-profit groups. The reasons are two fold: first, we want to avoid competing for contracts that would interfere with the business of commercial instructional design groups and contractors; second, we want to impress on our students the idea that instructional design has social importance beyond the profit/loss and cost/effectiveness orientation of many instructional design businesses. In this way, we promote the idea that instructional designers are agents of social change, and their influence crosses interpersonal, professional, institutional and societal dimensions of change (Schwier, Campbell and Kenny, 2007.  Résumé : L’apprentissage authentique est présenté comme une approche efficace en apprentissage, en particulier dans le contexte de l’apprentissage par problèmes (Savery, 2006. Enseigner et apprendre la conception pédagogique semble offrir une correspondance étroite entre les principes de l’apprentissage authentique et la pratique de la conception pédagogique. Cet article présente de manière détaillée les efforts visant à élargir et à approfondir la compréhension qu’ont les étudiants de la conception p

  13. Feasibility of Computer Processing of Technical Information on the Design of Instructional Systems. Final Report for the Period 1 July 1972 through 31 March 1973.

    Science.gov (United States)

    Scheffler, F. L.; And Others

    A feasibility study examined the capability of a computer-based system's handling of technical information pertinent to the design of instructional systems. Structured interviews were held to assess the information needs of both researchers and practitioners and an investigation was conducted of 10 computer-based information storage and retrieval…

  14. Redefining Classroom Culture through Instructional Design

    Science.gov (United States)

    Faryadi, Qais; Bakar, Zainab Abu; Maidinsah, Hamidah; Muhamad, Aminuddin

    2007-01-01

    This critical assessment attempts to define a good instructional design through the eyes and the minds of renowned scholars and the most outspoken educational psychologists such as Gagne, John Keller, Jerome Bruner, and Richard E. Mayer and so on. This examination also discusses ways in directing the mental map of students for better knowledge…

  15. BASIC Instructional Program: System Documentation.

    Science.gov (United States)

    Dageforde, Mary L.

    This report documents the BASIC Instructional Program (BIP), a "hands-on laboratory" that teaches elementary programming in the BASIC language, as implemented in the MAINSAIL language, a machine-independent revision of SAIL which should facilitate implementation of BIP on other computing systems. Eight instructional modules which make up…

  16. Computer-based instruction system DIDAK and its application

    International Nuclear Information System (INIS)

    Gvozdjak, L.; Hanulova, L.; Jankovicova, A.; Scepanek, L.

    1983-01-01

    The DIDAK system has been developed for the instruction and training of specialized personnel of nuclear power plants. The structure of the instruction system comprises three processes: the author process, the instruction process and the administration process. Author processes provide the didactic data structure with instruction texts. In the text data base the instruction material is stored in 6 direct access nonformatted files. The instruction system receives information from the text data base and presents it to the student. According to the student's response it creates the preconditions for the further operation of the system which it stores in the data base for administration of instruction. This base contains data on the identification of students, on the instruction process of the individual and the instruction process as a whole. Administrative processes take place in the final stage. They provide information on the general course of instruction and make final evaluations. From the data base of products of the instruction process the said administrative processes produce output information for the teacher. The subject matter of each subject is divided into a finite number of elementary units of subject matter. Each elementary unit provides basic information on the explained subject matter and is followed by a check of the student's knowledge. In dependence on the results of this check the student either advances to a higher level elementary unit or proceeds to an alternative branch of the initial unit. (E.S.)

  17. The Effects of a Computer-Assisted Teaching Material, Designed According to the ASSURE Instructional Design and the ARCS Model of Motivation, on Students’ Achievement Levels in a Mathematics Lesson and Their Resulting Attitudes

    OpenAIRE

    Hilal Karakış; Ayşen Karamete; Aydın Okçu

    2016-01-01

    This study examined the effects that computer-assisted instruction had on students’ attitudes toward a mathematics lesson and toward learning mathematics with computer-assisted instruction. The computer software we used was based on the ASSURE Instructional Systems Design and the ARCS Model of Motivation, and the software was designed to teach fractions to fourth-grade students. The skill levels of these students were gauged before and after receiving the computer-assisted instruction. We str...

  18. Developing Instructional Design to Improve Mathematical Higher Order Thinking Skills of Students

    Science.gov (United States)

    Apino, E.; Retnawati, H.

    2017-02-01

    This study aimed to describe the instructional design to improve the Higher Order Thinking Skills (HOTS) of students in learning mathematics. This research is design research involving teachers and students of class X MIPA 1 MAN Yigyakarta III, Special Region of Yogyakarta, Indonesia. Data collected through focus group discussions and tests. Data analyzed by quantitative descriptive. The results showed that the instructional design developed is effective to improving students’ HOTS in learning mathematics. Instructional design developed generally include three main components: (1) involve students in the activities non-routine problem solving; (2) facilitating students to develop the ability to analyze and evaluate (critical thinking) and the ability to create (creative thinking); and (3) encourage students to construct their own knowledge.

  19. Applying Case-Based Method in Designing Self-Directed Online Instruction: A Formative Research Study

    Science.gov (United States)

    Luo, Heng; Koszalka, Tiffany A.; Arnone, Marilyn P.; Choi, Ikseon

    2018-01-01

    This study investigated the case-based method (CBM) instructional-design theory and its application in designing self-directed online instruction. The purpose of this study was to validate and refine the theory for a self-directed online instruction context. Guided by formative research methodology, this study first developed an online tutorial…

  20. Would Having a Lead Instructional Designer Position Encourage Change in a K-12 Educational Setting?

    Science.gov (United States)

    Morris, John

    2011-01-01

    Adding the position Lead Instructional Designer (LID) will help an educational company or school district to work with principals and instructional designers to implement better instructional design strategies. This type of change creates more jobs and takes added pressure away from schools. The vision is to create better customer service to the…

  1. Rapid Prototyping in Instructional Design: Creating Competencies

    Science.gov (United States)

    Fulton, Carolyn D.

    2010-01-01

    Instructional designers working in rapid prototyping environments currently do not have a list of competencies that help to identify the knowledge, skills, and attitudes (KSAs) required in these workplaces. This qualitative case study used multiple cases in an attempt to identify rapid prototyping competencies required in a rapid prototyping…

  2. Design of dual DC motor control system based on DSP

    Science.gov (United States)

    Shi, Peicheng; Wang, Suo; Xu, Zengwei; Xiao, Ping

    2017-08-01

    Multi-motor control systems are widely used in actual production and life, such as lifting stages, robots, printing systems. This paper through serial communication between PC and DSP, dual DC motor control system consisting of PC as the host computer, DSP as the lower computer with synchronous PWM speed regulation, commutation and selection functions is designed. It sends digital control instructions with host computer serial debugger to lower computer, to instruct the motor to complete corresponding actions. The hardware and software design of the control system are given, and feasibility and validity of the control system are verified by experiments. The expected design goal is achieved.

  3. Virtual tutor systems for robot-assisted instruction

    Science.gov (United States)

    Zhao, Zhijing; Zhao, Deyu; Zhang, Zizhen; Wei, Yongji; Qi, Bingchen; Okawa, Yoshikuni

    2004-03-01

    Virtual Reality technology belongs to advanced computer technology, it has been applied in instruction field and gains obvious effect. At the same time, robot assisted instruction comes true with the continuous development of Robot technology and artificial intelligence technology. This paper introduces a virtual tutor system for robot assisted instruction.

  4. Beyond the Initiatives: Developing instructional leadership in school principals as a system-wide effort to improve the quality of classroom instruction.

    OpenAIRE

    Aguilera, Sondra Denise

    2016-01-01

    This design research effort implemented a series of intervention activities designed to support a small group of elementary school principals improve their instructional leadership practices. The purpose of this research was to improve the skills of principals to lead instructional improvements identified through classroom observations, work with their school-level Instructional Leadership Team (ILT) to create teacher professional development that addresses the instructional improvement, and ...

  5. Designing Genetics Instruction for a Socratic Approach

    Science.gov (United States)

    Idros, Sharifah Norhaidah Syed

    2004-01-01

    Science is at heart a rational activity. Reasoning, being an important component of critical thinking has been successfully taught using Socratic methods. As an approach, the instructor or designer of instruction models an inquiring and probing mind focusing on providing questions and not answers. The main aim has been to allow learners to…

  6. The Modified Delphi Method to Analyze the Application of Instructional Design Theory to Online Graduate Education

    Science.gov (United States)

    Zeedick, Danielle Marie

    2010-01-01

    During the past several decades, the field of instructional design theory has experienced changes in what is mostly applied to traditional, on-ground education. While instructional design theory has been (and still is being) discussed, constructed, and deconstructed, there has been no agreement among prominent instructional design theory…

  7. Resisting Technological Gravity: Using Guiding Principles for Instructional Design

    Science.gov (United States)

    McDonald, Jason K.

    2010-01-01

    Instructional designers face tremendous pressure to abandon the essential characteristics of educational approaches, and settle instead for routine practices that do not preserve the level of quality those approaches originally expressed. Because this pressure can be strong enough to affect designers almost as gravity affects objects in the…

  8. The Design of an Instructional Model Based on Connectivism and Constructivism to Create Innovation in Real World Experience

    Science.gov (United States)

    Jirasatjanukul, Kanokrat; Jeerungsuwan, Namon

    2018-01-01

    The objectives of the research were to (1) design an instructional model based on Connectivism and Constructivism to create innovation in real world experience, (2) assess the model designed--the designed instructional model. The research involved 2 stages: (1) the instructional model design and (2) the instructional model rating. The sample…

  9. Instructional Theory for Teaching Statistics.

    Science.gov (United States)

    Atwood, Jan R.; Dinham, Sarah M.

    Metatheoretical analysis of Ausubel's Theory of Meaningful Verbal Learning and Gagne's Theory of Instruction using the Dickoff and James paradigm produced two instructional systems for basic statistics. The systems were tested with a pretest-posttest control group design utilizing students enrolled in an introductory-level graduate statistics…

  10. Instructional Design as Manipulation of, or Cooperation with, Learners?

    Science.gov (United States)

    Matthews, Michael T.; Yanchar, Stephen C.

    2018-01-01

    We present a qualitative study of the tension between manipulative and cooperative approaches to instructional design. We found that our participants struggled to resist manipulative tendencies in their work contexts. More specifically, our findings suggest that our participants sought to design with their learners in mind to foster a more…

  11. Preparing Instructional Designers for Game-Based Learning: Part 1

    Science.gov (United States)

    Hirumi, Atsusi; Appelman, Bob; Rieber, Lloyd; Van Eck, Richard

    2010-01-01

    Like many rapidly growing industries, advances in video game technology are far outpacing research on its design and effectiveness. Relatively little is understood about how to apply what we know about teaching and learning to optimize game-based learning. For the most part, instructional designers know little about game development and video game…

  12. How to use Gagne's model of instructional design in teaching psychomotor skills.

    Science.gov (United States)

    Khadjooi, Kayvan; Rostami, Kamran; Ishaq, Sauid

    2011-01-01

    Gagne's model of instructional design is based on the information processing model of the mental events that occur when adults are presented with various stimuli and focuses on the learning outcomes and how to arrange specific instructional events to achieve those outcomes. Applying Gagne's nine-step model is an excellent way to ensure an effective and systematic learning program as it gives structure to the lesson plans and a holistic view to the teaching. In this paper, we have chosen a routine practical procedure that junior doctors need to learn: insertion of a peritoneal (ascitic) drain and we use Gagne's "events of instruction" to design a lesson plan for this subject.

  13. Virtual Reality Hypermedia Design Frameworks for Science Instruction.

    Science.gov (United States)

    Maule, R. William; Oh, Byron; Check, Rosa

    This paper reports on a study that conceptualizes a research framework to aid software design and development for virtual reality (VR) computer applications for instruction in the sciences. The framework provides methodologies for the processing, collection, examination, classification, and presentation of multimedia information within hyperlinked…

  14. Comparisons between students' learning achievements of their conventional instruction and the science, technology and social conceptual instructional design on digestion system issue of secondary students at the 10th grade level

    Science.gov (United States)

    Wichalek, Supattra; Chayaburakul, Kanokporn; Santiboon, Toansakul

    2018-01-01

    The purposes of this action research study were 1) to develop learning activities according to the instructional designing model of science, technology, and social (STS) on Digestion Issue, 2) to compare students' learning achievements between their learning activities with the conventional instructional (CIM) and conceptual instructional designing methods of science, technology, and social (STS) on digestion system of secondary students at the 10th grade level with a sample size of 35 experimental student group of their STS learning method, and 91 controlling group in two classes in the first semester in academic year 2016. Using the 4-Instructional Innovative Lesson Plans, the Students' Learning Behaviour Observing Form, the Questionnaire on Teacher Behaviour Interaction (QTBI), the Researcher's Recording Form, the Learning Activity Form, and the Parallel Learning Achievement Test (LAT) were assessed. The results of this research have found that; the Index of Item Objective Congruence (IOC) value ranged from 0.67 to 1.00; the difficulty values were 0.47 and 0.79 for the CIM and STS methods, respectively, the discriminative validity for the LAT was ranged from 0.20 to 0.75. The reliability of the QTBI was 0.79. Students' responses of their learning achievements with the average means scores indicted of the normalized gain values of 0.79 for the STS group, and 0.50 and 0.36 for the CIM groups, respectively. Students' learning achievements of their post-test indicated that of a higher than pre-test, the pre-test and post-test assessments were also differentiated evidence at the 0.05 levels for the STS and CIM groups, significantly. The 22-students' learning outcomes from the STS group evidences at a high level, only of the 9-students' responses in a moderate level were developed of their learning achievements, responsibility.

  15. Cognitive Tutoring based on Intelligent Decision Support in the PENTHA Instructional Design Model

    Science.gov (United States)

    dall'Acqua, Luisa

    2010-06-01

    The research finality of this paper is how to support Authors to develop rule driven—subject oriented, adaptable course content, meta-rules—representing the disciplinary epistemology, model of teaching, Learning Path structure, and assessment parameters—for intelligent Tutoring actions in a personalized, adaptive e-Learning environment. The focus is to instruct the student to be a decision manager for himself, able to recognize the elements of a problem, select the necessary information with the perspective of factual choices. In particular, our research intends to provide some fundamental guidelines for the definition of didactical rules and logical relations, that Authors should provide to a cognitive Tutoring system through the use of an Instructional Design method (PENTHA Model) which proposes an educational environment, able to: increase productivity and operability, create conditions for a cooperative dialogue, developing participatory research activities of knowledge, observations and discoveries, customizing the learning design in a complex and holistic vision of the learning / teaching processes.

  16. Implementing Integrated Multicultural Instructional Design in Management Education

    Science.gov (United States)

    Schultz, Jennifer L.; Higbee, Jeanne L.

    2011-01-01

    This purpose of this paper is to summarize the principles of integrated multicultural instructional design (IMID; Higbee, Goff, & Schultz, in press; Higbee, Schultz, & Goff, 2010) and present specific strategies for incorporating IMID in management education. The primary goal of IMID is to promote the integration of multicultural content…

  17. Applications of decision theory to computer-based adaptive instructional systems

    NARCIS (Netherlands)

    Vos, Hendrik J.

    1988-01-01

    This paper considers applications of decision theory to the problem of instructional decision-making in computer-based adaptive instructional systems, using the Minnesota Adaptive Instructional System (MAIS) as an example. The first section indicates how the problem of selecting the appropriate

  18. Fuel System: Automotive Mechanics Instructional Program. Block 4.

    Science.gov (United States)

    O'Brien, Ralph D.

    The fourth of six instructional blocks in automotive mechanics, the lessons and supportive information in the document provide a guide for teachers in planning an instructional program in automotive fuel systems at the secondary and post secondary level. The material, as organized, is a suggested sequence of instruction within each block. Each…

  19. Cooling System: Automotive Mechanics Instructional Program. Block 6.

    Science.gov (United States)

    O'Brien, Ralph D.

    The last of six instructional blocks in automotive mechanics, the lessons and supportive information in the document provide a guide for teachers in planning an instructional program in the automotive cooling system at the secondary and post secondary level. The material, as organized, is a suggested sequence of instruction within each block. Each…

  20. Instructional Design and Project Management: Complementary or Divergent?

    Science.gov (United States)

    van Rooij, Shahron Williams

    2011-01-01

    This paper reports the results of a study to identify the extent to which organizations that develop educational/training products are committed to project management, as measured by their project management implementation maturity, as a methodology that is separate and distinct from the processes of instructional design. A Web survey was…

  1. Applying Universal Instructional Design to Course Websites by Using Course Evaluations

    Science.gov (United States)

    Carter, Irene; Leslie, Donald; Kwan, Denise

    2012-01-01

    The authors explore their use of learner-centred teaching strategies and Universal Instructional Design (UID) on course websites. UID is based on universal design, the design of products and environments intended to be usable by all people to the greatest extent possible (Burgstahler & Cory, 2008). UID applies universal design to instructional…

  2. Method of Computer-aided Instruction in Situation Control Systems

    Directory of Open Access Journals (Sweden)

    Anatoliy O. Kargin

    2013-01-01

    Full Text Available The article considers the problem of computer-aided instruction in context-chain motivated situation control system of the complex technical system behavior. The conceptual and formal models of situation control with practical instruction are considered. Acquisition of new behavior knowledge is presented as structural changes in system memory in the form of situational agent set. Model and method of computer-aided instruction represent formalization, based on the nondistinct theories by physiologists and cognitive psychologists.The formal instruction model describes situation and reaction formation and dependence on different parameters, effecting education, such as the reinforcement value, time between the stimulus, action and the reinforcement. The change of the contextual link between situational elements when using is formalized.The examples and results of computer instruction experiments of the robot device “LEGO MINDSTORMS NXT”, equipped with ultrasonic distance, touch, light sensors.

  3. Backward Instructional design for an educational open resource in Spanish Vocational Training: The case of the Web Apps Project

    Directory of Open Access Journals (Sweden)

    Cristian Jorge GARCÍA MARCOS

    2017-07-01

    Full Text Available The article is concerned with the instructional design process used to elaborate an educational media developing the Web Applications module curriculum of Microcomputer Systems and Networks Intermediate Level Training Cycle, which belongs to the professional family of Computing and Communications within the studies of Vocational Education and Training. A backward model is followed as instructional design to create the educational media, starting with the learning outcomes and ending with the contents, in a reverse way to the procedure used in other instructional designs. The educational media has been designed based on constructivism as pedagogical principle and it has been used to create projects for the student to be actively involved in the development of their knowledge. The result is an open educational resource composed of six didactic sequences, where the student is expected to achieve higher order thinking skills. In addition to openness in access, use, adaptation and redistribution of material, the article provides a detailed view of the process that has been followed in each phase of instructional design. In this way, the educational resource evolves from being not only open in its content, but also in its design, so that the latter becomes accessible, reusable, adapted and redistributed by others. The full open educational resource can be found at the following link: http://www.cristiangarcia.org/WebAppsProject/index.html

  4. Aligning Game Activity with Educational Goals: Following a Constrained Design Approach to Instructional Computer Games

    Science.gov (United States)

    Shelton, Brett E.; Scoresby, Jon

    2011-01-01

    We discuss the design, creation and implementation of an instructional game for use in a high school poetry class following a commitment to an educational game design principle of "alignment". We studied groups of instructional designers and an interactive fiction computer game they built. The game was implemented in a 9th grade English classroom…

  5. A Waterfall Design Strategy for Using Social Media for Instruction

    Science.gov (United States)

    Ahern, Terence C.

    2016-01-01

    Using social media can create a rich learning environment that crosses all content areas. The key to creating this environment is for instructors and designers to match appropriate social media software with the intended learning outcome. This article describes an instructional design strategy that helps educators create learning activities that…

  6. Cognitive System Engineering Approach to Design of Work Support Systems

    DEFF Research Database (Denmark)

    Rasmussen, Jens

    1995-01-01

    The problem of designing work support systems for flexible, dynamic work environments is discussed and a framework for analysis of work in terms of behavior shaping constraints is described. The application of 'ecological interfaces' presenting to the user a map of the relational structure...... of the work space is advocated from the thesis that a map is a better guidance of discretionary tasks than is a route instruction. For the same reason, support of system design is proposed in terms of maps of the design territory, rather than in terms of guidelines....

  7. Screen Design Guidelines for Motivation in Interactive Multimedia Instruction: A Survey and Framework for Designers.

    Science.gov (United States)

    Lee, Sung Heum; Boling, Elizabeth

    1999-01-01

    Identifies guidelines from the literature relating to screen design and design of interactive instructional materials. Describes two types of guidelines--those aimed at enhancing motivation and those aimed at preventing loss of motivation--for typography, graphics, color, and animation and audio. Proposes a framework for considering motivation in…

  8. Technical guide to criticality alarm system design

    International Nuclear Information System (INIS)

    Greenfield, B.

    2009-01-01

    An instructional manual was created to guide criticality safety engineers through the technical aspects of designing a criticality alarm system (CAS) for Dept. of Energy (DOE) hazard class 1 and 2 facilities. The manual was structured such that it can be used by engineers designing completely new systems and by those who are working with existing facilities. Major design tasks are thoroughly analyzed to provide concise direction for how to complete the analysis. Regulatory and technical performance requirements were both addressed. (authors)

  9. Motivational Measure of the Instruction Compared: Instruction Based on the ARCS Motivation Theory vs Traditional Instruction in Blended Courses

    Science.gov (United States)

    Colakoglu, Ozgur M.; Akdemir, Omur

    2012-01-01

    The ARCS Motivation Theory was proposed to guide instructional designers and teachers who develop their own instruction to integrate motivational design strategies into the instruction. There is a lack of literature supporting the idea that instruction for blended courses if designed based on the ARCS Motivation Theory provides different…

  10. Reactor helium system, design specification, operation and handling

    International Nuclear Information System (INIS)

    Badrljica, R.

    1984-06-01

    Apart from detailed design specification of the helium cover gas system of the Ra reactor, this document includes description of the operating regime, instructions for manipulations in the system with the aim of achieving and maintaining stationary gas circulation [sr

  11. Implications of Two Well-Known Models for Instructional Designers in Distance Education: Dick-Carey versus Morrison-Ross-Kemp

    Science.gov (United States)

    Akbulut, Yavuz

    2007-01-01

    This paper first summarizes, and then compares and contrasts two well-known instructional design models: Dick and Carey Model (DC) and Morrison, Ross and Kemp model (MRK). The target audiences of both models are basically instructional designers. Both models have applications for different instructional design settings. They both see the…

  12. Instructional Design-Based Research on Problem Solving Strategies

    Science.gov (United States)

    Emre-Akdogan, Elçin; Argün, Ziya

    2016-01-01

    The main goal of this study is to find out the effect of the instructional design method on the enhancement of problem solving abilities of students. Teaching sessions were applied to ten students who are in 11th grade, to teach them problem solving strategies which are working backwards, finding pattern, adopting a different point of view,…

  13. Instructional design considerations promoting engineering design self-efficacy

    Science.gov (United States)

    Jackson, Andrew M.

    Engineering design activities are frequently included in technology and engineering classrooms. These activities provide an open-ended context for practicing critical thinking, problem solving, creativity, and innovation---collectively part of the 21st Century Skills which are increasingly needed for success in the workplace. Self-efficacy is a perceptual belief that impacts learning and behavior. It has been shown to directly impact each of these 21st Century Skills but its relation to engineering design is only recently being studied. The purpose of this study was to examine how instructional considerations made when implementing engineering design activities might affect student self-efficacy outcomes in a middle school engineering classroom. Student responses to two self-efficacy inventories related to design, the Engineering Design Self-Efficacy Instrument and Creative Thinking Self-Efficacy Inventory, were collected before and after participation in an engineering design curriculum. Students were also answered questions on specific factors of their experience during the curriculum which teachers may exhibit control over: teamwork and feedback. Results were analyzed using Pearson's correlation coefficients, paired and independent t-tests, and structural equation modeling to better understand patterns for self-efficacy beliefs in students. Results suggested that design self-efficacy and creative thinking self-efficacy are significantly correlated, r(1541) = .783, p classroom strategies for increasing self-efficacy and given specific recommendations related to teamwork and feedback to support students. Finally, although there were weaknesses in the study related to the survey administration, future research opportunities are presented which may build from this work.

  14. The Effects of Instructional Design on Student Engagement with Video Lectures at Cyber Universities

    Directory of Open Access Journals (Sweden)

    Jamie Costley

    2017-05-01

    Full Text Available Aim/Purpose: The number of students enrolled in online courses that use video lectures is on the rise. However, research shows that the number of students watching video lectures is low, and the number watching videos to completion is even lower. Background: This paper seeks to understand this problem by looking for correlations between instructional design and student engagement with video lectures. Methodology: Students at a cyber-university in South Korea (n=1801 were surveyed on their perception of the instructional design used in the courses they took and their engagement with online video lectures. Contribution: This paper contributes to the body of knowledge by demonstrating positive correlations between instructional design, watching, and finishing video lectures. Findings: While most other research has found low levels of online lecture viewership, this paper found significantly higher numbers watching and finishing videos. Other major findings of the paper are that five key elements of instructional design for online learning environments (designing methods, setting the curriculum, establishing time parameters, establishing netiquette, and utilizing the medium effectively all correlated positively with students watching and finishing video lectures. Recommendations for Practitioners\t: Based on findings in this paper, it is recommended that practitioners consider taking actions when designing their instruction for online courses. These include batching their video lectures together by topic, devoting greater resources to helping students utilize the medium, and communicate time parameters in a way that encourages students to view video lectures in a timely manner. Recommendation for Researchers: As the watching of video lectures in this study was mandatory for learners, an interesting area of further research would be to examine whether that decision led to higher numbers of students watching them. Future Research: It is important for

  15. Comparative effectiveness of instructional design features in simulation-based education: systematic review and meta-analysis.

    Science.gov (United States)

    Cook, David A; Hamstra, Stanley J; Brydges, Ryan; Zendejas, Benjamin; Szostek, Jason H; Wang, Amy T; Erwin, Patricia J; Hatala, Rose

    2013-01-01

    Although technology-enhanced simulation is increasingly used in health professions education, features of effective simulation-based instructional design remain uncertain. Evaluate the effectiveness of instructional design features through a systematic review of studies comparing different simulation-based interventions. We systematically searched MEDLINE, EMBASE, CINAHL, ERIC, PsycINFO, Scopus, key journals, and previous review bibliographies through May 2011. We included original research studies that compared one simulation intervention with another and involved health professions learners. Working in duplicate, we evaluated study quality and abstracted information on learners, outcomes, and instructional design features. We pooled results using random effects meta-analysis. From a pool of 10,903 articles we identified 289 eligible studies enrolling 18,971 trainees, including 208 randomized trials. Inconsistency was usually large (I2 > 50%). For skills outcomes, pooled effect sizes (positive numbers favoring the instructional design feature) were 0.68 for range of difficulty (20 studies; p simulation-based education.

  16. Applied CAL on Problem Based Learning Using Gagne’s Instructional Design

    Directory of Open Access Journals (Sweden)

    Sri Sundari Purbohadi

    2014-10-01

    Full Text Available Abstract— In the Problem-Based Learning (PBL model, students are expected to study independently. One of the methods that can improve the ability or skill of learners is using Computer Assisted Learning (CAL. Implementation of CAL in PBL should be able to create Self-Directed Learning (SDL culture through appropriate instructional design and interesting modules. In this paper, the CAL software is developed using multimedia learning principles, convenient appearance, and user-friendly navigation. The CAL’s learning content is designed using Gagne's instructional design. The experiment proved the CAL was able to give effect size 0.89 and developed self-directed learning culture. From the interviews, students were very glad and interested to use the CAL modules because they can learn anytime and can reach the course objectives without a lecturer.

  17. Inclusive college teaching: universal design for instruction and diverse learners

    Directory of Open Access Journals (Sweden)

    Joan M. McGuire

    2011-11-01

    Full Text Available Shifts in enrollment patterns are affecting college classrooms and elements of teaching ranging from options for delivering course materials online to multiple methods of assessing learning. With the enrollment of more diverse college learners comes a call to intentionally design instruction that is more inclusive and responsive to multiple learning styles. The notion of Universal Design for Instruction (UDI is examined from its roots in the architectural field to its application as a model for teaching that anticipates diversity including students with disabilities. Principles of UDI are defined, and pedagogical examples are provided. Several implementation projects based on the UDI concept are described as are preliminary results regarding outcomes. Substantive issues are identified that have bearing on the direction this innovative idea will take over the next several years.

  18. Elementary Students' Learning of Materials Science Practices Through Instruction Based on Engineering Design Tasks

    Science.gov (United States)

    Wendell, Kristen Bethke; Lee, Hee-Sun

    2010-12-01

    Materials science, which entails the practices of selecting, testing, and characterizing materials, is an important discipline within the study of matter. This paper examines how third grade students' materials science performance changes over the course of instruction based on an engineering design challenge. We conducted a case study of nine students who participated in engineering design-based science instruction with the goal of constructing a stable, quiet, thermally comfortable model house. The learning outcome of materials science practices was assessed by clinical interviews conducted before and after the instruction, and the learning process was assessed by students' workbooks completed during the instruction. The interviews included two materials selection tasks for designing a sturdy stepstool and an insulated pet habitat. Results indicate that: (1) students significantly improved on both materials selection tasks, (2) their gains were significantly positively associated with the degree of completion of their workbooks, and (3) students who were highly engaged with the workbook's reflective record-keeping tasks showed the greatest improvement on the interviews. These findings suggest the important role workbooks can play in facilitating elementary students' learning of science through authentic activity such as engineering design.

  19. A Conceptual Model for the Design and Delivery of Explicit Thinking Skills Instruction

    Science.gov (United States)

    Kassem, Cherrie L.

    2005-01-01

    Developing student thinking skills is an important goal for most educators. However, due to time constraints and weighty content standards, thinking skills instruction is often embedded in subject matter, implicit and incidental. For best results, thinking skills instruction requires a systematic design and explicit teaching strategies. The…

  20. Using instructional design process to improve design and development of Internet interventions.

    Science.gov (United States)

    Hilgart, Michelle M; Ritterband, Lee M; Thorndike, Frances P; Kinzie, Mable B

    2012-06-28

    Given the wide reach and extensive capabilities of the Internet, it is increasingly being used to deliver comprehensive behavioral and mental health intervention and prevention programs. Their goals are to change user behavior, reduce unwanted complications or symptoms, and improve health status and health-related quality of life. Internet interventions have been found efficacious in addressing a wide range of behavioral and mental health problems, including insomnia, nicotine dependence, obesity, diabetes, depression, and anxiety. Despite the existence of many Internet-based interventions, there is little research to inform their design and development. A model for behavior change in Internet interventions has been published to help guide future Internet intervention development and to help predict and explain behavior changes and symptom improvement outcomes through the use of Internet interventions. An argument is made for grounding the development of Internet interventions within a scientific framework. To that end, the model highlights a multitude of design-related components, areas, and elements, including user characteristics, environment, intervention content, level of intervention support, and targeted outcomes. However, more discussion is needed regarding how the design of the program should be developed to address these issues. While there is little research on the design and development of Internet interventions, there is a rich, related literature in the field of instructional design (ID) that can be used to inform Internet intervention development. ID models are prescriptive models that describe a set of activities involved in the planning, implementation, and evaluation of instructional programs. Using ID process models has been shown to increase the effectiveness of learning programs in a broad range of contexts. ID models specify a systematic method for assessing the needs of learners (intervention users) to determine the gaps between current

  1. Cognitive Approaches to Automated Instruction.

    Science.gov (United States)

    Regian, J. Wesley, Ed.; Shute, Valerie J., Ed.

    This book contains a snapshot of state-of-the-art research on the design of automated instructional systems. Selected cognitive psychologists were asked to describe their approach to instruction and cognitive diagnosis, the theoretical basis of the approach, its utility and applicability, and the knowledge engineering or task analysis methods…

  2. The Experimental Research on E-Learning Instructional Design Model Based on Cognitive Flexibility Theory

    Science.gov (United States)

    Cao, Xianzhong; Wang, Feng; Zheng, Zhongmei

    The paper reports an educational experiment on the e-Learning instructional design model based on Cognitive Flexibility Theory, the experiment were made to explore the feasibility and effectiveness of the model in promoting the learning quality in ill-structured domain. The study performed the experiment on two groups of students: one group learned through the system designed by the model and the other learned by the traditional method. The results of the experiment indicate that the e-Learning designed through the model is helpful to promote the intrinsic motivation, learning quality in ill-structured domains, ability to resolve ill-structured problem and creative thinking ability of the students.

  3. The impact of design-based modeling instruction on seventh graders' spatial abilities and model-based argumentation

    Science.gov (United States)

    McConnell, William J.

    models to better assist them in scientific argumentation over paper drawing models. In fact, when given a choice, students rarely used paper drawing to assist in argument. There was also a difference in model utility between the two different model types. Participants explicitly used 3D printed models to complete gestural modeling, while participants rarely looked at 2D models when involved in gestural modeling. This study's findings added to current theory dealing with the varied spatial challenges involved in different modes of expressed models. This study found that depth, symmetry and the manipulation of perspectives are typically spatial challenges students will attend to using CAD while they will typically ignore them when drawing using paper and pencil. This study also revealed a major difference in model-based argument in a design-based instruction context as opposed to model-based argument in a typical science classroom context. In the context of design-based instruction, data revealed that design process is an important part of model-based argument. Due to the importance of design process in model-based argumentation in this context, trusted methods of argument analysis, like the coding system of the IASCA, was found lacking in many respects. Limitations and recommendations for further research were also presented.

  4. Holistic School Leadership: Systems Thinking as an Instructional Leadership Enabler

    Science.gov (United States)

    Shaked, Haim; Schechter, Chen

    2016-01-01

    As instructional leadership involves attempts to understand and improve complex systems, this study explored principals' perceptions regarding possible contributions of systems thinking to instructional leadership. Based on a qualitative analysis, systems thinking was perceived by middle and high school principals to contribute to the following…

  5. Instructional Design for the Future of Undergraduate Journalism Education

    Science.gov (United States)

    Farmer, Christopher J.

    2012-01-01

    In the face of communication changes brought on by technology, journalism curriculum needs restructuring while staying true to its core values. Using an instructional design framework, and a case study, this paper proposes a journalism education based on Esser's spheres of influence. Current practices and principles are discussed. A literature…

  6. Designing Online Instruction for Postsecondary Students with Learning Disabilities

    Science.gov (United States)

    Simoncelli, Andrew; Hinson, Janice

    2010-01-01

    This research details the methodologies that could be used to better deliver online course content to students with learning disabilities. Research has shown how the design of the course affects the students' attitudes and performance. This article details the methodology and pedagogical side of the delivery including instructional methods that…

  7. Instructional Design Thought Processes of Expert Nurse Educators

    OpenAIRE

    Gross, Monty Dale

    2006-01-01

    This study explores how expert nurse educators design instruction. Six female expert nurse educators volunteered to participate. Each participant had over ten years experience teaching, and all were recognized for their teaching excellence. They also had master's or doctoral degrees. Participants worked in small private schools, community colleges, or large public universities. The methodology was based in developmental research. Qualitative data sources included interviews, think-aloud proto...

  8. Multimedia Terminal System-on-Chip Design and Simulation

    Directory of Open Access Journals (Sweden)

    Barbieri Ivano

    2005-01-01

    Full Text Available This paper proposes a design approach based on integrated architectural and system-on-chip (SoC simulations. The main idea is to have an efficient framework for the design and the evaluation of multimedia terminals, allowing a fast system simulation with a definable degree of accuracy. The design approach includes the simulation of very long instruction word (VLIW digital signal processors (DSPs, the utilization of a device multiplexing the media streams, and the emulation of the real-time media acquisition. This methodology allows the evaluation of both the multimedia algorithm implementations and the hardware platform, giving feedback on the complete SoC including the interaction between modules and conflicts in accessing either the bus or shared resources. An instruction set architecture (ISA simulator and an SoC simulation environment compose the integrated framework. In order to validate this approach, the evaluation of an audio-video multiprocessor terminal is presented, and the complete simulation test results are reported.

  9. Project-Based Learning with an Online Peer Assessment System in a Photonics Instruction for Enhancing LED Design Skills

    Science.gov (United States)

    Chang, Shu-Hsuan; Wu, Tsung-Chih; Kuo, Yen-Kuang; You, Li-Chih

    2012-01-01

    This study proposed a novel instructional approach, a two-stage LED simulation of Project-based learning (PBL) course with online peer assessment (OPA), and explored how to apply OPA to the different structured problems in a PBL course to enhance students' professional skills in LED design as well as meta-cognitive thinking. The participants of…

  10. A multimedia adult literacy program: Combining NASA technology, instructional design theory, and authentic literacy concepts

    Science.gov (United States)

    Willis, Jerry W.

    1993-01-01

    For a number of years, the Software Technology Branch of the Information Systems Directorate has been involved in the application of cutting edge hardware and software technologies to instructional tasks related to NASA projects. The branch has developed intelligent computer aided training shells, instructional applications of virtual reality and multimedia, and computer-based instructional packages that use fuzzy logic for both instructional and diagnostic decision making. One outcome of the work on space-related technology-supported instruction has been the creation of a significant pool of human talent in the branch with current expertise on the cutting edges of instructional technologies. When the human talent is combined with advanced technologies for graphics, sound, video, CD-ROM, and high speed computing, the result is a powerful research and development group that both contributes to the applied foundations of instructional technology and creates effective instructional packages that take advantage of a range of advanced technologies. Several branch projects are currently underway that combine NASA-developed expertise to significant instructional problems in public education. The branch, for example, has developed intelligent computer aided software to help high school students learn physics and staff are currently working on a project to produce educational software for young children with language deficits. This report deals with another project, the adult literacy tutor. Unfortunately, while there are a number of computer-based instructional packages available for adult literacy instruction, most of them are based on the same instructional models that failed these students when they were in school. The teacher-centered, discrete skill and drill-oriented, instructional strategies, even when they are supported by color computer graphics and animation, that form the foundation for most of the computer-based literacy packages currently on the market may not

  11. Instructional Designers' Media Selection Practices for Distributed Problem-Based Learning Environments

    Science.gov (United States)

    Fells, Stephanie

    2012-01-01

    The design of online or distributed problem-based learning (dPBL) is a nascent, complex design problem. Instructional designers are challenged to effectively unite the constructivist principles of problem-based learning (PBL) with appropriate media in order to create quality dPBL environments. While computer-mediated communication (CMC) tools and…

  12. Learning physics: A comparative analysis between instructional design methods

    Science.gov (United States)

    Mathew, Easow

    The purpose of this research was to determine if there were differences in academic performance between students who participated in traditional versus collaborative problem-based learning (PBL) instructional design approaches to physics curricula. This study utilized a quantitative quasi-experimental design methodology to determine the significance of differences in pre- and posttest introductory physics exam performance between students who participated in traditional (i.e., control group) versus collaborative problem solving (PBL) instructional design (i.e., experimental group) approaches to physics curricula over a college semester in 2008. There were 42 student participants (N = 42) enrolled in an introductory physics course at the research site in the Spring 2008 semester who agreed to participate in this study after reading and signing informed consent documents. A total of 22 participants were assigned to the experimental group (n = 22) who participated in a PBL based teaching methodology along with traditional lecture methods. The other 20 students were assigned to the control group (n = 20) who participated in the traditional lecture teaching methodology. Both the courses were taught by experienced professors who have qualifications at the doctoral level. The results indicated statistically significant differences (p traditional (i.e., lower physics posttest scores and lower differences between pre- and posttest scores) versus collaborative (i.e., higher physics posttest scores, and higher differences between pre- and posttest scores) instructional design approaches to physics curricula. Despite some slight differences in control group and experimental group demographic characteristics (gender, ethnicity, and age) there were statistically significant (p = .04) differences between female average academic improvement which was much higher than male average academic improvement (˜63%) in the control group which may indicate that traditional teaching methods

  13. Applying Instructional Design Theories to Bioinformatics Education in Microarray Analysis and Primer Design Workshops

    Science.gov (United States)

    Shachak, Aviv; Ophir, Ron; Rubin, Eitan

    2005-01-01

    The need to support bioinformatics training has been widely recognized by scientists, industry, and government institutions. However, the discussion of instructional methods for teaching bioinformatics is only beginning. Here we report on a systematic attempt to design two bioinformatics workshops for graduate biology students on the basis of…

  14. System for processing an encrypted instruction stream in hardware

    Science.gov (United States)

    Griswold, Richard L.; Nickless, William K.; Conrad, Ryan C.

    2016-04-12

    A system and method of processing an encrypted instruction stream in hardware is disclosed. Main memory stores the encrypted instruction stream and unencrypted data. A central processing unit (CPU) is operatively coupled to the main memory. A decryptor is operatively coupled to the main memory and located within the CPU. The decryptor decrypts the encrypted instruction stream upon receipt of an instruction fetch signal from a CPU core. Unencrypted data is passed through to the CPU core without decryption upon receipt of a data fetch signal.

  15. Instruction by Design, A Report on the Conference on New Instructional Materials in Physics (University of Washington, Seattle, June 21-August 21, 1965).

    Science.gov (United States)

    Commission on Coll. Physics, College Park, MD.

    This review has a section devoted to each of the following conference topics: Monographs, Film, Experiment Sequences, Computer-assisted Instruction, Designing a Unit of Instruction, and Toward New Solutions. Each section contains background discussion on the rationale, philosophy, and importance for improvements in the area being considered. The…

  16. Design of Learning Objects for Concept Learning: Effects of Multimedia Learning Principles and an Instructional Approach

    Science.gov (United States)

    Chiu, Thomas K. F.; Churchill, Daniel

    2016-01-01

    Literature suggests using multimedia learning principles in the design of instructional material. However, these principles may not be sufficient for the design of learning objects for concept learning in mathematics. This paper reports on an experimental study that investigated the effects of an instructional approach, which includes two teaching…

  17. Study of the 5E Instructional Model to Improve the Instructional Design Process of Novice Teachers

    Science.gov (United States)

    Hu, Jiuhua; Gao, Chong; Liu, Yang

    2017-01-01

    This study investigated the effects of 5E instructional model on the teaching processes of novice teachers. First, we conducted a teaching design training project based on the 5E model for 40 novice teachers, and compared pre-texts of the teachers' teaching process from before the training with post-texts obtained immediately following the…

  18. Designing Interactive Multimedia Instruction To Enable and Enhance Information Literacy.

    Science.gov (United States)

    Amidon, Leslie E.

    2001-01-01

    Addresses key strategies for the design and development of Interactive Multimedia Instruction (IMI) programs for adult learners, focusing on the removal of learning barriers and the incorporation of information literacy principles. Barriers include financial constraints, socio-economic and social class, communication skills, time constraints,…

  19. From Paper to PDA: Design and Evaluation of a Clinical Ward Instruction on a Mobile Device

    Science.gov (United States)

    Kanstrup, Anne Marie; Stage, Jan

    Mobile devices with small screens and minimal facilities for interaction are increasingly being used in complex human activities for accessing and processing information, while the user is moving. This paper presents a case study of the design and evaluation of a mobile system, which involved transformation of complex text and tables to digital format on a PDA. The application domain was an emergency medical ward, and the user group was junior registrars. We designed a PDA-based system for accessing information, focusing on the ward instruction, implemented a prototype and evaluated it for usability and utility. The evaluation results indicate significant problems in the interaction with the system as well as the extent to which the system is useful for junior registrars in their daily work.

  20. Instructional games and activities for criticality safety training

    International Nuclear Information System (INIS)

    Bullard, B.; McBride, J.

    1993-01-01

    During the past several years, the Training and Management Systems Division (TMSD) staff of Oak Ridge Institute for Science and Education (ORISE) has designed and developed nuclear criticality safety (NCS) training programs that focus on high trainee involvement through the use of instructional games and activities. This paper discusses the instructional game, initial considerations for developing games, advantages and limitations of games, and how games may be used in developing and implementing NCS training. It also provides examples of the various instructional games and activities used in separate courses designed for Martin Marietta Energy Systems (MMES's) supervisors and U.S. Nuclear Regulatory Commission (NRC) fuel facility inspectors

  1. An Instructional Satellite System for the United States: Preliminary Considerations.

    Science.gov (United States)

    DuMolin, James R.; Morgan, Robert P.

    Based on educational, social, political, and other considerations, an instructional satellite system, AVSIN (Ausio-Visual Satellite Instruction), is hypothesized which represents one possible organizational and administrative arrangement for delivering large amounts of quality software to schools and learning centers. The AVSIN system is conceived…

  2. International Instructional Systems: Social Studies

    Science.gov (United States)

    Brant, Jacek; Chapman, Arthur; Isaacs, Tina

    2016-01-01

    This paper reports on research conducted as part of the International Instructional System Study that explored five subject areas across nine jurisdictions in six high-performing countries. The Study's overall aim was to understand what, if anything, there is in common in the curricula and assessment arrangements among the high-performing…

  3. Evaluating Online Dialogue on "Security" Using a Novel Instructional Design

    Science.gov (United States)

    Arora, Payal

    2008-01-01

    This paper explores evaluation strategies to gauge the impact of a novel instructional design on international community participation online. This is done by conceptualizing and devising indicators for measuring "engagement" online amongst marginalized adult communities worldwide. In doing so, a review of online evaluation literature is…

  4. Using Importance-Performance Analysis to Guide Instructional Design of Experiential Learning Activities

    Science.gov (United States)

    Anderson, Sheri; Hsu, Yu-Chang; Kinney, Judy

    2016-01-01

    Designing experiential learning activities requires an instructor to think about what they want the students to learn. Using importance-performance analysis can assist with the instructional design of the activities. This exploratory study used importance-performance analysis in an online introduction to criminology course. There is limited…

  5. A Design-Based Research Case Study Documenting a Constructivist ID Process and Instructional Solution for a Cross-Cultural Workforce

    Science.gov (United States)

    Tracey, Monica W.; Unger, Kelly L.

    2012-01-01

    As the need for instructing a globalized workforce increases, instructional designers must embrace the constraints and the opportunities these projects provide in order to move the field of cross-cultural instructional design (ID) forward. Cross-cultural projects offer multiple avenues for growth in ID practice, overcoming cultural barriers, and a…

  6. Writing and Rewriting the Instructional Design Case: A View from Two Sides

    Directory of Open Access Journals (Sweden)

    Craig D. Howard, Rodney Myers

    2011-01-01

    Full Text Available This article analyzes five problem areas educators grapple with when writing designs cases about learning interventions. The article is written from the vantage point of IJDL’s assistant editor who edited, reviewed, and coordinated the reviews of design cases over a period of two years while also writing his own design case (Howard & Myers, 2010: International Journal of Designs for Learning. The knowledge building genre of the instructional design case is viewed from the perspective of commonalities between articles published in a Tech Trends feature, the Instructional Design Portfolio, and this venue. The areas of concern common among reviews for these publications shed light on how the design case is developing into a rigorous form of educational inquiry. The areas of concern brought up in reviews of cases are discussed in light of the author’s first hand experiences of satisfying reviewers’ concerns and, in turn, coaching other educators through the process of a finalized design case. Those common areas are: (1 situating the design, (2 describing the design, (3 depicting the experience of the design, (4 developing trustworthiness through transparency, analysis, and reflection (5 removing aspects of design cases which confound their purpose. Specific examples from design cases that have gone through peer review describe how author-educators may approach the dissemination of design precedent through the careful documentation of pedagogical designs.

  7. A Symbiosis Between Instructional Systems Design and Project Management / Une symbiose de la conception de matériel pédagogique et de la gestion de projet

    Directory of Open Access Journals (Sweden)

    Cheng-Chang (Sam Pan

    2012-02-01

    Full Text Available This study is intended to explore a complementary relationship between instructional systems design (ISD and project management in an attempt to build a plausible case for integrating project management as a distinct course in the core of the graduate instructional systems design programs. It is argued that ISD and project management should form a symbiosis from a curriculum perspective, in a hope for the prepared instructional designers to create values for customers. An integrated view of ISD and project management is proposed, using three concepts of project management as a reasonable bridge for the integration. Challenges for the proposed view in this position paper are also stated. Cette étude explore la complémentarité de la conception de matériel pédagogique et de la gestion de projets en vue de justifier l’intégration de la gestion de projets à titre de cours distinct au cœur des programmes des cycles supérieurs en conception de matériel pédagogique. L’étude fait valoir l’intérêt d’une symbiose de la conception de matériel pédagogique et de la gestion de projets du point de vue du programme d’études, afin de préparer les concepteurs pédagogiques formés à créer une plus-value pour les clients. Elle propose une vision intégrée de la conception de matériel pédagogique et de la gestion de projets fondée sur trois concepts de la gestion de projets favorisant une telle intégration. Les défis de la vision proposée dans cet exposé de position sont également énoncés.

  8. The 5L Instructional Design For Exploring Legacies through Biography

    Science.gov (United States)

    Boulware, Beverly J.; Monroe, Eula E.; Wilcox, Bradley Ray

    2013-01-01

    People who have impacted generations have left legacies we can explore today through biographies. The 5L instructional design introduced in this article includes five components: Listen, Learn, Locate, Link, and Legacy. In the "Listen" section, teachers use storytelling and read-alouds to introduce individuals who shaped history. During…

  9. Evaluating Online Dialogue on “Security” Using a Novel Instructional Design

    NARCIS (Netherlands)

    P.A. Arora (Payal)

    2008-01-01

    textabstractAbstract: This paper explores evaluation strategies to gauge the impact of a novel instructional design on international community participation online. This is done by conceptualizing and devising indicators for measuring “engagement” online amongst marginalized adult communities

  10. Efficacy of the Technological/Engineering Design Approach: Imposed Cognitive Demands within Design-Based Biotechnology Instruction

    Science.gov (United States)

    Wells, John G.

    2016-01-01

    Though not empirically established as an efficacious pedagogy for promoting higher order thinking skills, technological/engineering design-based learning in K-12 STEM education is increasingly embraced as a core instructional method for integrative STEM learning that promotes the development of student critical thinking skills (Honey, Pearson,…

  11. Defining the "D" in ISD. Part 1: Task-General Instructional Methods.

    Science.gov (United States)

    Clark, Ruth Colvin

    1986-01-01

    The first of two articles designed to provide guidelines for the instructional development phase of instructional systems development focuses on general instructional methods supporting all instructional tasks. Teaching methods that support selective attention, processing in working memory, and connecting in long-term memory are described and…

  12. Instructional Technology, Temper, Technique, and Teacher Empowerment.

    Science.gov (United States)

    Hunter, J. Mark; Garrison, James W.

    1991-01-01

    Scientific management and hierarchical accountability tend to destroy dialogue and issue ideas as orders to be obeyed. Instructional technology packages can actually enslave teachers. The emendation or feedback loop built into all instructional systems should allow educators to alter design in the context of practice and help technologists design…

  13. Computer-aided instruction system

    International Nuclear Information System (INIS)

    Teneze, Jean Claude

    1968-01-01

    This research thesis addresses the use of teleprocessing and time sharing by the RAX IBM system and the possibility to introduce a dialog with the machine to develop an application in which the computer plays the role of a teacher for different pupils at the same time. Two operating modes are thus exploited: a teacher-mode and a pupil-mode. The developed CAI (computer-aided instruction) system comprises a checker to check the course syntax in teacher-mode, a translator to trans-code the course written in teacher-mode into a form which can be processes by the execution programme, and the execution programme which presents the course in pupil-mode

  14. Radioactive contamination mapping system detailed design report

    International Nuclear Information System (INIS)

    Bauer, R.G.; O'Callaghan, P.B.

    1996-08-01

    The Hanford Site's 100 Area production reactors released radioactively and chemically contaminated liquids into the soil column. The primary source of the contaminated liquids was reactor coolant and various waste waters released from planned liquid discharges, as well as pipelines, pipe junctions, and retention basins leaking into the disposal sites. Site remediation involves excavating the contaminated soils using conventional earthmoving techniques and equipment, treating as appropriate, transporting the soils, and disposing the soils at ERDF. To support remediation excavation, disposal, and documentation requirements, an automated radiological monitoring system was deemed necessary. The RCMS (Radioactive Contamination Mapping System) was designed to fulfill this need. This Detailed Design Report provides design information for the RCMS in accordance with Bechtel Hanford, Inc. Engineering Design Project Instructions

  15. Towards Cognitive Load Theory as Guideline for Instructional Design in Science Education

    Science.gov (United States)

    Meissner, Barbara; Bogner, Franz X.

    2013-01-01

    We applied cognitive load theory in an heuristic out-of-school science lesson. The lesson comprises experiments concerning major attributes of NaCl and was designed for 5th to 8th grade students. Our interest focused on whether cognitive load theory provides sufficient guidelines for instructional design in the field of heuristic science…

  16. Instructional Design, Facilitation, and Perceived Learning Outcomes: An Exploratory Case Study of a Human Trafficking MOOC for Attitudinal Change

    Science.gov (United States)

    Watson, Sunnie Lee; Loizzo, Jamie; Watson, William R.; Mueller, Chad; Lim, Jieun; Ertmer, Peggy A.

    2016-01-01

    This exploratory case study describes the design and facilitation of a massive open online course (MOOC) for attitudinal change regarding human trafficking. It examines the course from the learners', instructor's, and instructional designer's perspectives. Two interviews with the instructor and instructional designer were conducted, and data from…

  17. An approach to participatory instructional design in secondary education: an exploratory study

    NARCIS (Netherlands)

    Könings, Karen; Brand-Gruwel, Saskia; Van Merriënboer, Jeroen

    2010-01-01

    Könings, K. D., Brand-Gruwel, S., & Van Merriënboer, J. J. G. (2010). An approach to participatory instructional design in secondary education: an exploratory study. Educational Research, 52(1), 45-59.

  18. Instruction of the CSN on the requirements of the system of management of the nuclear power plants

    International Nuclear Information System (INIS)

    Cid, R.; Santo, A. de; Gil Montes, B.; Toca, A.

    2008-01-01

    The Western European Nations Regulatory Authorities (WENRA) performed a nuclear safety requirements harmonization task, as a result of this work and its implementation, the Spanish Nuclear Safety Counsel (CSN) has the commitment to issue its own Regulation Safety Instructions) to identify the WENRA to level nuclear safety requirements, and to incorporate it in the Spanish regulatory pyramid. However, the Spain nuclear installations meet these requirements through the original criteria to fulfill the regulation of the country that supply the NSSS design, these requirements are not incorporated in our regulation. One of the issues, identified by WENRA, is the implementation of the management system requirements in accord with the IAEA GS-R-3 The Management System for Facilities and Activities. As these regards, the CSN has developed a Safety Instruction, basically endorsing the IAEA GS-R-3. The Safety Instruction is actually in a phase of external comments and should be issued by june 2008. This paper describes the bases for the Safety Instruction, summarises the requirements that would meet the management system for nuclear installations and the activities to perform for its implementations. (Author)

  19. A Framework for Intelligent Instructional Systems: An Artificial Intelligence Machine Learning Approach.

    Science.gov (United States)

    Becker, Lee A.

    1987-01-01

    Presents and develops a general model of the nature of a learning system and a classification for learning systems. Highlights include the relationship between artificial intelligence and cognitive psychology; computer-based instructional systems; intelligent instructional systems; and the role of the learner's knowledge base in an intelligent…

  20. A Comparison of Interactive Multimedia Instruction Designs Addressing Soldiers Learning Needs

    Science.gov (United States)

    2016-03-01

    animations, and if learners need such cues to support their learning (de Koning et al., 2009). If cues are overused, learners’ attention can be divided...J. P., Paas, F. (2009). Towards a framework for attention cueing in instructional animations: Guidelines for research and design. Educational...information (i.e., contextual content) than familiarization. This design strategy was selected on the basis of discussion with MCoE DOTD, who expressed a

  1. Scaffolded Instruction Improves Student Understanding of the Scientific Method & Experimental Design

    Science.gov (United States)

    D'Costa, Allison R.; Schlueter, Mark A.

    2013-01-01

    Implementation of a guided-inquiry lab in introductory biology classes, along with scaffolded instruction, improved students' understanding of the scientific method, their ability to design an experiment, and their identification of experimental variables. Pre- and postassessments from experimental versus control sections over three semesters…

  2. Systems for Instructional Improvement: Creating Coherence from the Classroom to the District Office

    Science.gov (United States)

    Cobb, Paul; Jackson, Kara; Henrick, Erin; Smith, Thomas M.

    2018-01-01

    In "Systems for Instructional Improvement," Paul Cobb and his colleagues draw on their extensive research to propose a series of specific, empirically grounded recommendations that together constitute a theory of action for advancing instruction at scale. The authors outline the elements of a coherent instructional system; describe…

  3. Instructional Design of Entrepreneurship Courses: Interview Research of Wyoming BRAVO! Entrepreneurs

    Science.gov (United States)

    Kolb, Belinda J.

    2010-01-01

    This qualitative study investigated the opportunity recognition process of Wyoming BRAVO! Entrepreneur (WBE) Award winners or nominees, in order to better inform the learner analysis and organizational strategy components of instructional design, specifically with respect to entrepreneurship courses. This study may be of significance to post…

  4. Using Diffusion of Innovation Theory to Promote Universally Designed College Instruction

    Science.gov (United States)

    Scott, Sally; McGuire, Joan

    2017-01-01

    Universal Design applied to college instruction has evolved and rapidly spread on an international scale. Diffusion of Innovation theory is described and used to identify patterns of change in this trend. Implications and strategies are discussed for promoting this inclusive approach to teaching in higher education.

  5. Color Research and Its Application to the Design of Instructional Materials.

    Science.gov (United States)

    Pett, Dennis; Wilson, Trudy

    1996-01-01

    Reviews color research and considers its implications for the design of instructional materials. Topics include physiological and psychological effects; color and learning, including attention, search tasks, retention and other objective measures, and non-objective measures; color and the cathode ray tube (CRT); and further research needs.…

  6. Collaboration systems for classroom instruction

    Science.gov (United States)

    Chen, C. Y. Roger; Meliksetian, Dikran S.; Chang, Martin C.

    1996-01-01

    In this paper we discuss how classroom instruction can benefit from state-of-the-art technologies in networks, worldwide web access through Internet, multimedia, databases, and computing. Functional requirements for establishing such a high-tech classroom are identified, followed by descriptions of our current experimental implementations. The focus of the paper is on the capabilities of distributed collaboration, which supports both synchronous multimedia information sharing as well as a shared work environment for distributed teamwork and group decision making. Our ultimate goal is to achieve the concept of 'living world in a classroom' such that live and dynamic up-to-date information and material from all over the world can be integrated into classroom instruction on a real-time basis. We describe how we incorporate application developments in a geography study tool, worldwide web information retrievals, databases, and programming environments into the collaborative system.

  7. Identifying Multimedia Production Competencies and Skills of Instructional Design and Technology Professionals: An Analysis of Recent Job Postings

    Science.gov (United States)

    Sugar, William; Hoard, Brent; Brown, Abbie; Daniels, Lee

    2012-01-01

    In an effort to document necessary multimedia production competencies of Instructional Design and Technology graduates, a recent analysis of over 7 months' worth of Instructional Design and Technology job advertisements (n = 615) were conducted. Specific job skills from these postings were categorized and analyzed. The data set includes three job…

  8. Monkeys on the Screen?: Multicultural Issues in Instructional Message Design

    Directory of Open Access Journals (Sweden)

    Debbie McAnany

    2009-09-01

    Full Text Available With the shift in numbers between Canadian-born students in the university classroom and the increased number of international students, it is a primary concern for instructors and instructional designers to know and understand learner characteristics in order to create effective instructional messages and materials. Recognizing how culture might shape cognition and learning, we can value and design for the diversity of students and maximize their learning while improving the learning environment for all students. To celebrate cultural diversity and meet the challenges associated with designing for diverse learning styles and educational experiences, this paper offers a review of the literature and proposes a systematic three-fold approach to the creation and evaluation of multicultural instructional messages and materials: first, “Do no harm”; second, “Know your learner”; and third, “Incorporate global concepts and images into instructional messages.” Résumé Avec le renversement des proportions d’étudiants nés au Canada et d’étudiants internationaux qui sont de plus en plus nombreux dans nos universités, connaître et comprendre les caractéristiques des apprenants constitue maintenant une préoccupation majeure pour les instructeurs et les concepteurs pédagogiques afin de créer des messages et du matériel pédagogiques efficaces. En prenant en considération la façon dont la culture peut influencer la cognition et l’apprentissage, nous pouvons tenir compte de la diversité des étudiants lors de la conception et ainsi maximiser leur apprentissage tout en améliorant l’environnement d’apprentissage pour tous les étudiants. Dans le but de célébrer la diversité culturelle tout en relevant les défis associés à la conception pour divers styles d’apprentissage et d’expériences éducatives, le présent article présente un examen de la documentation et propose une approche systématique en trois volets pour

  9. The Effect of the Instructional Media Based on Lecture Video and Slide Synchronization System on Statistics Learning Achievement

    Directory of Open Access Journals (Sweden)

    Partha Sindu I Gede

    2018-01-01

    Full Text Available The purpose of this study was to determine the effect of the use of the instructional media based on lecture video and slide synchronization system on Statistics learning achievement of the students of PTI department . The benefit of this research is to help lecturers in the instructional process i to improve student's learning achievements that lead to better students’ learning outcomes. Students can use instructional media which is created from the lecture video and slide synchronization system to support more interactive self-learning activities. Students can conduct learning activities more efficiently and conductively because synchronized lecture video and slide can assist students in the learning process. The population of this research was all students of semester VI (six majoring in Informatics Engineering Education. The sample of the research was the students of class VI B and VI D of the academic year 2016/2017. The type of research used in this study was quasi-experiment. The research design used was post test only with non equivalent control group design. The result of this research concluded that there was a significant influence in the application of learning media based on lectures video and slide synchronization system on statistics learning result on PTI department.

  10. Elementary science teachers' integration of engineering design into science instruction: results from a randomised controlled trial

    Science.gov (United States)

    Maeng, Jennifer L.; Whitworth, Brooke A.; Gonczi, Amanda L.; Navy, Shannon L.; Wheeler, Lindsay B.

    2017-07-01

    This randomised controlled trial used a mixed-methods approach to investigate the frequency and how elementary teachers integrated engineering design (ED) principles into their science instruction following professional development (PD). The ED components of the PD were aligned with Cunningham and Carlsen's [(2014). Teaching engineering practices. Journal of Science Teacher Education, 25, 197-210] guidelines for ED PD and promoted inclusion of ED within science teaching. The treatment group included 219 teachers from 83 schools. Participants in the control group included 145 teachers from 60 schools in a mid-Atlantic state. Data sources, including lesson overviews and videotaped classroom observations, were analysed quantitatively to determine the frequency of ED integration and qualitatively to describe how teachers incorporated ED into instruction after attending the PD. Results indicated more participants who attended the PD (55%) incorporated ED into instruction compared with the control participants (24%), χ2(1, n = 401) = 33.225, p .05) through ED lessons. In ED lessons, students typically conducted research and created and tested initial designs. The results suggest the PD supported teachers in implementing ED into their science instruction and support the efficacy of using Cunningham and Carlsen's (2014) guidelines to inform ED PD design.

  11. Design compliance matrix waste sample container filling system for nested, fixed-depth sampling system

    International Nuclear Information System (INIS)

    BOGER, R.M.

    1999-01-01

    This design compliance matrix document provides specific design related functional characteristics, constraints, and requirements for the container filling system that is part of the nested, fixed-depth sampling system. This document addresses performance, external interfaces, ALARA, Authorization Basis, environmental and design code requirements for the container filling system. The container filling system will interface with the waste stream from the fluidic pumping channels of the nested, fixed-depth sampling system and will fill containers with waste that meet the Resource Conservation and Recovery Act (RCRA) criteria for waste that contains volatile and semi-volatile organic materials. The specifications for the nested, fixed-depth sampling system are described in a Level 2 Specification document (HNF-3483, Rev. 1). The basis for this design compliance matrix document is the Tank Waste Remediation System (TWRS) desk instructions for design Compliance matrix documents (PI-CP-008-00, Rev. 0)

  12. Evolution of the Instructional Design in a Series of Online Workshops | L’évolution d’un design pédagogique dans le développement d’ateliers en ligne

    Directory of Open Access Journals (Sweden)

    Anne Patry

    2015-11-01

    Full Text Available This case recounts the story of the design and production of a series of online workshops for French-speaking healthcare professionals in Canada. The project spans a couple of years and, despite encountering some challenges, succeeds in large part because of its strong foundation: the instructional design. This case study features an instructional designer from a central Canadian university and three SMEs. The main design issues highlighted are the target population’s limited availability for continuing education, the SME’s lack of knowledge of the instructional design process, the magnitude of this project with its national scope but limited time frame and human resources, as well as personnel changes among the SMEs and the instructional design team. This case outlines how the project team deals with these challenges to produce a series of online workshops that provide high quality training in French to healthcare professionals across Canada.

  13. A Review of What Instructional Designers Do: Questions Answered and Questions Not Asked

    Directory of Open Access Journals (Sweden)

    Richard Kenny

    2005-02-01

    Full Text Available The purpose of this literature review was to determine what evidence there is that instructional designers apply ID Models, as well as to establish what other activities and processes they might use in their professional activities. Only ten articles were located that directly pertained to this topic: seven reporting on empirical research and three case descriptions recounting development experiences. All ten papers pertained to process-based ID models. Results showed that, while instructional designers apparently do make use of process-based ID models, they do not spend the majority of their time working with them nor do they follow them in a rigid fashion. They also engage in a wide variety of other tasks that are not reflected in ID models.

  14. An Alternative View of the Instructional Design Process: A Response to Smith and Boling

    Science.gov (United States)

    Gibbons, Andrew S.; Yanchar, Stephen C.

    2010-01-01

    A recent literature review by Smith and Boling (2009) critically examines the received view of instructional design in educational technology. Smith and Boling conclude that the foundational literature characterizes design in a way that leads to a constrained understanding of design, especially by novices. They suggest that as a field we move…

  15. Designing Instructional Strategies which Facilitate Learning for Mastery.

    Science.gov (United States)

    Anderson, Lorin W.; Jones, Beau Fly

    The "state of the craft" of instruction within the context of the mastery learning model is discussed. Little has been said in the past about specific instructional strategies that are applicable to particular instructional units or objectives, or to the daily classroom life of teachers. This paper is organized into six major sections. The first…

  16. The Teacher as Instructional Designer: A Search Through the Curriculum Maze.

    Science.gov (United States)

    Jacko, Carol M.; Garman, Noreen M.

    The vast amount of literature on curriculum and instructional design does not establish a clear frame of reference to help teachers utilize and operationalize concepts and information. Four specific problem areas are of special concern in the literature: (1) the terminology and definitions are confusing; (2) the place of the classroom teacher is…

  17. Designing flexible instructional space for teaching introductory physics with emphasis on inquiry and collaborative active learning

    Science.gov (United States)

    Bykov, Tikhon

    2010-03-01

    In recent years McMurry University's introductory physics curriculum has gone through a series of significant changes to achieve better integration of traditional course components (lecture/lab/discussion) by means of instructional design and technology. A system of flexible curriculum modules with emphasis on inquiry-based teaching and collaborative active learning has been introduced. To unify module elements, a technology suite has been used that consists of Tablet PC's and software applications including Physlets, tablet-adapted personal response system, PASCO data acquisition systems, and MS One-note collaborative writing software. Adoption of the new teaching model resulted in reevaluation of existing instructional spaces. The new teaching space will be created during the renovation of the McMurry Science Building. This space will allow for easy transitions between lecture and laboratory modes. Movable partitions will be used to accommodate student groups of different sizes. The space will be supportive of small peer-group activities with easy-to-reconfigure furniture, multiple white and black board surfaces and multiple projection screens. The new space will be highly flexible to account for different teaching functions, different teaching modes and learning styles.

  18. Designing Online Instruction for Success: Future Oriented Motivation and Self-Regulation

    Science.gov (United States)

    Schmidt, Joel T.; Werner, Christian H.

    2007-01-01

    Given the high rate of student drop-out and withdrawal from courses and programs using an online learning format, it is important to consider innovative ways to foster and encourage student success in online environments. One such way is to incorporate aspects of student future orientation into the design of online instruction. This paper presents…

  19. Teacher's Guide to Accompany "Artes Latinae," the Encyclopaedia Britannica Latin Instructional System.

    Science.gov (United States)

    Masciantonio, Rudolph; And Others

    This guide, a supplement to the "Artes Latinae Level One Teacher's Manual," prepared for use in the School District of Philadelphia, focuses primarily on how to adapt this course, intended for individualized instruction, to group instruction. Discussion of the multisensory instructional system includes remarks concerning the use of films, study…

  20. Design and Implementation of Instructional Videos for Upper-Division Undergraduate Laboratory Courses

    Science.gov (United States)

    Schmidt-McCormack, Jennifer A.; Muniz, Marc N.; Keuter, Ellie C.; Shaw, Scott K.; Cole, Renée S.

    2017-01-01

    Well-designed laboratories can help students master content and science practices by successfully completing the laboratory experiments. Upper-division chemistry laboratory courses often present special challenges for instruction due to the instrument intensive nature of the experiments. To address these challenges, particularly those associated…

  1. NALDA (Naval Aviation Logistics Data Analysis) CAI (computer aided instruction)

    Energy Technology Data Exchange (ETDEWEB)

    Handler, B.H. (Oak Ridge K-25 Site, TN (USA)); France, P.A.; Frey, S.C.; Gaubas, N.F.; Hyland, K.J.; Lindsey, A.M.; Manley, D.O. (Oak Ridge Associated Universities, Inc., TN (USA)); Hunnum, W.H. (North Carolina Univ., Chapel Hill, NC (USA)); Smith, D.L. (Memphis State Univ., TN (USA))

    1990-07-01

    Data Systems Engineering Organization (DSEO) personnel developed a prototype computer aided instruction CAI system for the Naval Aviation Logistics Data Analysis (NALDA) system. The objective of this project was to provide a CAI prototype that could be used as an enhancement to existing NALDA training. The CAI prototype project was performed in phases. The task undertaken in Phase I was to analyze the problem and the alternative solutions and to develop a set of recommendations on how best to proceed. The findings from Phase I are documented in Recommended CAI Approach for the NALDA System (Duncan et al., 1987). In Phase II, a structured design and specifications were developed, and a prototype CAI system was created. A report, NALDA CAI Prototype: Phase II Final Report, was written to record the findings and results of Phase II. NALDA CAI: Recommendations for an Advanced Instructional Model, is comprised of related papers encompassing research on computer aided instruction CAI, newly developing training technologies, instructional systems development, and an Advanced Instructional Model. These topics were selected because of their relevancy to the CAI needs of NALDA. These papers provide general background information on various aspects of CAI and give a broad overview of new technologies and their impact on the future design and development of training programs. The paper within have been index separately elsewhere.

  2. Dialogue design for the openphone system

    CSIR Research Space (South Africa)

    Ndwe, TJ

    2008-11-01

    Full Text Available relevant information on care-giving issues to caregivers for HIV/Aids-infected children in Botswana. The intended users, the caregivers, can access this information over a telephone line in their local language of Setswana. The system lowers... is an intervention that is complementary to the present method of ineffective lecturing, which remotely instructs on, reminds of and consolidates knowledge on care-giving issues for the caregivers, as written material cannot be supplied. THE DESIGN...

  3. MOOCS AS NEW CONDITIONS FOR INSTRUCTIONAL DESIGN

    DEFF Research Database (Denmark)

    Buhl, Mie; Andreasen, Lars Birch; Karanam, Pushpanadham

    MOOCS AS NEW CONDITIONS FOR INSTRUCTIONAL DESIGN Prof. Karanam Pushpanadham (The Maharaja Sayajirao University of Baroda) Prof. Mie Buhl (Aalborg University) Associate Prof. Lars Birch Andreasen (Aalborg University) ABSTRACT Education at all levels can shape the world of tomorrow, equipping...... education and research institutions and a critical mass of skilled and educated people, no society can ensure genuine sustainable development (UNESCO, 1998). Information and Communication Technologies have entailed changes in the conditions for teaching and learning. New technologies do not in themselves....... With the large-scale development of massive open online courses, MOOCs, new questions have arisen in relation to the planning, organizing and carrying out of the teaching situation. The classical pedagogical questions of what? (content), how? (methods), why? (purpose), and who? (participants) have been...

  4. Wicked ID: Conceptual Framework for Considering Instructional Design as a Wicked Problem

    Directory of Open Access Journals (Sweden)

    Katrin Becker

    2007-02-01

    Full Text Available The process of instructional design has parallels in other design disciplines. Software design is one that has experienced intense attention in the last 30 or so years, and many lessons learned there can be applied to ID. Using software design as a springboard, this concept paper seeks to propose a new approach to ID. It suggests that instructional design is almost always a Wicked Problem. The connection is formed between Wicked Problems as first described by Rittel and Webber in 1973, and the models in and processes of instructional design. The areas of social planning, organizational management and software design all posses some accepted and tested approaches to the solution of Wicked Problems. These will be described, and how they can be applied to ID will be explained. Finally, this paper will propose a meta-model for ID and explain how it can be used in the current context. Résumé : Le processus de conception pédagogique a des similitudes avec d’autres disciplines. La conception de logiciels a fait l’objet d’une grande attention dans les trente dernières années et de nombreuses leçons tirées peuvent s’appliquer à la conception pédagogique. En se basant sur la conception de logiciels, cet article cherche à proposer une nouvelle méthode à la conception pédagogique. Il laisse entendre que la conception pédagogique constitue presque toujours un problème épineux. Le lien est formé entre les problèmes épineux tels que décrits par Rittel et Webber en 1973 et les modèles et processus de la conception pédagogique. Les secteurs de l’organisation sociale, de la gestion des organisations et de la conception de logiciels comptent des méthodes acceptées et validées à la résolution de problèmes épineux. Nous les décrirons et expliquerons comment ils peuvent servir à la conception pédagogique. Enfin, l’article proposera un meta-modèle de la conception pédagogique et expliquera comment il peut servir dans le

  5. Instructional Design for Accelerated Macrocognitive Expertise in the Baseball Workplace.

    Science.gov (United States)

    Fadde, Peter J

    2016-01-01

    The goal of accelerating expertise can leave researchers and trainers in human factors, naturalistic decision making, sport science, and expertise studies concerned about seemingly insufficient application of expert performance theories, findings and methods for training macrocognitive aspects of human performance. Video-occlusion methods perfected by sports expertise researchers have great instructional utility, in some cases offering an effective and inexpensive alternative to high-fidelity simulation. A key problem for instructional designers seems to be that expertise research done in laboratory and field settings doesn't get adequately translated into workplace training. Therefore, this article presents a framework for better linkage of expertise research/training across laboratory, field, and workplace settings. It also uses a case study to trace the development and implementation of a macrocognitive training program in the very challenging workplace of the baseball batters' box. This training, which was embedded for a full season in a college baseball team, targeted the perceptual-cognitive skill of pitch recognition that allows expert batters to circumvent limitations of human reaction time in order to hit a 90 mile-per-hour slider. While baseball batting has few analogous skills outside of sports, the instructional design principles of the training program developed to improve batting have wider applicability and implications. Its core operational principle, supported by information processing models but challenged by ecological models, decouples the perception-action link for targeted part-task training of the perception component, in much the same way that motor components routinely are isolated to leverage instructional efficiencies. After targeted perceptual training, perception and action were recoupled via transfer-appropriate tasks inspired by in situ research tasks. Using NCAA published statistics as performance measures, the cooperating team

  6. Instructional Design for Accelerated Macrocognitive Expertise in the Baseball Workplace

    Directory of Open Access Journals (Sweden)

    Peter J. Fadde

    2016-03-01

    Full Text Available The goal of accelerating expertise can leave researchers and trainers in human factors, naturalistic decision making, sport science, and expertise studies concerned about seemingly insufficient application of expert performance theories, findings and methods for training macrocognitive aspects of human performance. Video-occlusion methods perfected by sports expertise researchers have great instructional utility, in some cases offering an effective and inexpensive alternative to high-fidelity simulation. A key problem for instructional designers seems to be that expertise research done in laboratory and field settings doesn’t get adequately translated into workplace training. Therefore, this article presents a framework for better linkage of expertise research/training across laboratory, field, and workplace settings. It also uses a case study to trace the development and implementation of a macrocognitive training program in the very challenging workplace of the baseball batters’ box. This training, which was embedded for a full season in a college baseball team, targeted the perceptual-cognitive skill of pitch recognition that allows expert batters to circumvent limitations of human reaction time in order to hit a 90 mile-per-hour slider. While baseball batting has few analogous skills outside of sports, the instructional design principles of the training program developed to improve batting have wider applicability and implications. Its core operational principle, supported by information processing models but challenged by ecological models, decouples the perception-action link for targeted part-task training of the perception component, in much the same way that motor components routinely are isolated to leverage instructional efficiencies. After targeted perceptual training, perception and action were recoupled via transfer-appropriate tasks inspired by in situ research tasks. Using NCAA published statistics as performance measures

  7. Method and Tools for Development of Advanced Instructional Systems

    NARCIS (Netherlands)

    Arend, J. van der; Riemersma, J.B.J.

    1994-01-01

    The application of advanced instructional systems (AISs), like computer-based training systems, intelligent tutoring systems and training simulators, is widely spread within the Royal Netherlands Army. As a consequence there is a growing interest in methods and tools to develop effective and

  8. Instructional Control of Cognitive Load in the Design of Complex Learning Environments

    NARCIS (Netherlands)

    Kester, Liesbeth; Paas, Fred; Van Merriënboer, Jeroen

    2010-01-01

    Kester, L., Paas, F., & Van Merriënboer, J. J. G. (2010). Instructional control of cognitive load in the design of complex learning environments. In J. L. Plass, R. Moreno, & Roland Brünken (Eds.), Cognitive Load Theory (pp. 109-130). New York: Cambridge University Press.

  9. Metacognition and transfer within a course or instructional design rules and metacognition

    NARCIS (Netherlands)

    Vos, Henk

    2006-01-01

    A metacognitive strategy for doing research, included transfer, was taught in a course of nine afternoons. The success of this course raised some questions. How do the students learn? How does metacognition play a role? The course was designed in accordance with several instructional principles. The

  10. The Influence of Chinese Character Handwriting Diagnosis and Remedial Instruction System on Learners of Chinese as a Foreign Language

    Science.gov (United States)

    Hsiao, Hsien-Sheng; Chang, Cheng-Sian; Chen, Chiao-Jia; Wu, Chia-Hou; Lin, Chien-Yu

    2015-01-01

    This study designed and developed a Chinese character handwriting diagnosis and remedial instruction (CHDRI) system to improve Chinese as a foreign language (CFL) learners' ability to write Chinese characters. The CFL learners were given two tests based on the CHDRI system. One test focused on Chinese character handwriting to diagnose the CFL…

  11. Instructional design in mathematics for undergraduate students based on learning by mistakes approach utilizing scilab assistance

    Science.gov (United States)

    Kartika, H.

    2018-03-01

    The issue related to making mistake while learning such as negative emotion is found while students learn mathematics with the aid of a computer. When the computer output showed a mistake message, the students considered it as a computer software malfunction. Based on this issue, the writer designs an instructional model based on learning by mistake approach and which is Scilab assisted. The method used in this research is research design involving undergraduate students in matrix algebra courses. The data collected throught survey with questionnaire to gain feedback about the approach implemented. The data analyzed using quantitative descriptive. The instructional design proposed is the student act as a mistake corrector while the teacher acts as a mistake maker. Teacher deliberately makes mistakes with the help of Scilab software. On the other hand, students correct, analyze and explain errors resulting from Scilab software. The result of this research is an ICT based instructional design which is expected to be applicable as an alternative learning in directing students to think positively about mistakes in learning. Furthermore, students are also expected to improve their ability in understanding and thinking critically while solving problems and improving themselves in learning mathematics.

  12. A Simulation-Based LED Design Project in Photonics Instruction Based on Industry-University Collaboration

    Science.gov (United States)

    Chang, S. -H.; Chen, M. -L.; Kuo, Y. -K.; Shen, Y. -C.

    2011-01-01

    In response to the growing industrial demand for light-emitting diode (LED) design professionals, based on industry-university collaboration in Taiwan, this paper develops a novel instructional approach: a simulation-based learning course with peer assessment to develop students' professional skills in LED design as required by industry as well as…

  13. Using innovative instructional technology to meet training needs in public health: a design process.

    Science.gov (United States)

    Millery, Mari; Hall, Michelle; Eisman, Joanna; Murrman, Marita

    2014-03-01

    Technology and distance learning can potentially enhance the efficient and effective delivery of continuing education to the public health workforce. Public Health Training Centers collaborate with instructional technology designers to develop innovative, competency-based online learning experiences that meet pressing training needs and promote best practices. We describe one Public Health Training Center's online learning module design process, which consists of five steps: (1) identify training needs and priority competencies; (2) define learning objectives and identify educational challenges; (3) pose hypotheses and explore innovative, technology-based solutions; (4) develop and deploy the educational experience; and (5) evaluate feedback and outcomes to inform continued cycles of revision and improvement. Examples illustrate the model's application. These steps are discussed within the context of design practices in the fields of education, engineering, and public health. They incorporate key strategies from across these fields, including principles of programmatic design familiar to public health professionals, such as backward design. The instructional technology design process we describe provides a structure for the creativity, collaboration, and systematic strategies needed to develop online learning products that address critical training needs for the public health workforce.

  14. Multi-dimensional design window search system using neural networks in reactor core design

    International Nuclear Information System (INIS)

    Kugo, Teruhiko; Nakagawa, Masayuki

    2000-02-01

    In the reactor core design, many parametric survey calculations should be carried out to decide an optimal set of basic design parameter values. They consume a large amount of computation time and labor in the conventional way. To support directly design work, we investigate a procedure to search efficiently a design window, which is defined as feasible design parameter ranges satisfying design criteria and requirements, in a multi-dimensional space composed of several basic design parameters. We apply the present method to the neutronics and thermal hydraulics fields and develop the multi-dimensional design window search system using it. The principle of the present method is to construct the multilayer neural network to simulate quickly a response of an analysis code through a training process, and to reduce computation time using the neural network without parametric study using analysis codes. The system works on an engineering workstation (EWS) with efficient man-machine interface for pre- and post-processing. This report describes the principle of the present method, the structure of the system, the guidance of the usages of the system, the guideline for the efficient training of neural networks, the instructions of the input data for analysis calculation and so on. (author)

  15. Instructional Simulation of a Commercial Banking System.

    Science.gov (United States)

    Hester, Donald D.

    1991-01-01

    Describes an instructional simulation of a commercial banking system. Identifies the teaching of portfolio theory, market robustness, and the subtleties of institutional constraints and decision making under uncertainty as the project's goals. Discusses the results of applying the simulation in an environment of local and national markets and a…

  16. Lights, Camera, Action: Facilitating the Design and Production of Effective Instructional Videos

    Science.gov (United States)

    Di Paolo, Terry; Wakefield, Jenny S.; Mills, Leila A.; Baker, Laura

    2017-01-01

    This paper outlines a rudimentary process intended to guide faculty in K-12 and higher education through the steps involved to produce video for their classes. The process comprises four steps: planning, development, delivery and reflection. Each step is infused with instructional design information intended to support the collaboration between…

  17. Instructional Design in Job Skills Training for Welfare Recipients and Displaced Workers

    Science.gov (United States)

    Richardson, Arline; Storberg-Walker, Julia

    2006-01-01

    Scully-Russ (2005) described the low-wage labor market issue and the tendency in academic literature to view the problem as "fixing" the skills of low wageworkers. However, the article does not address instructional design issues surrounding low-wage employee training interventions. This manuscript attempts to discover the key factors surrounding…

  18. Fellowship Program in the Design and Development of Instructional Materials. Final Report.

    Science.gov (United States)

    Fleming, Malcolm; Pett, Dennis

    A two-year graduate program leading to a specialists's degree was administered to train individuals in the design of instructional materials for elementary, secondary, vocational and special education curricula. The program sought to achieve a multiplier effect by placing its graduates in positions in which they could help other educators to…

  19. Instructional Transaction Theory: Knowledge Relationships among Processes, Entities, and Activities.

    Science.gov (United States)

    Merrill, M. David; And Others

    1993-01-01

    Discussion of instructional transaction theory focuses on knowledge representation in an automated instructional design expert system. A knowledge structure called PEA-Net (processes, entities, and activities) is explained; the refrigeration process is used as an example; text resources and graphic resources are described; and simulations are…

  20. The relevance of temporal iconicity with instruction manuals for elderly users.

    Science.gov (United States)

    Mertens, Alexander; Nick, Claudia; Krüger, Stefan; Schlick, Christopher M

    2012-01-01

    Gerontolinguistic obtains a growing importance with the increase of elderly users due to Demographic Change. Since acceptance and ease of use of supportive systems for elderly, such as "E-Nursing-Assistants", are highly dependent on the age suitable design of readable instructions, an age-appropriate linguistic concept is of high value for usability. There has been only little research on the relevance of foreign words, signal words, textual arrangement, optical accentuation of key terms and temporal iconicity concerning older users. Thus, an efficient design of age suitable manual instructions within a medical context still remains to be done. The objective of this research was to evaluate the relevance of the previously mentioned factors in the context of written instructions. For this, an empirical survey was designed which was given to 45 study participants. The subjects of the experiment were given 4x3 instructions after a pretest questionnaire. The aim was to execute these instructions as correctly and quickly as possible. Furthermore the instructions were rated regarding comprehensibility with a retrospective questionnaire.

  1. Presentation Time Concerning System-Paced Multimedia Instructions and the Superiority of Learner Pacing

    Science.gov (United States)

    Stiller, Klaus D.; Petzold, Kirstin; Zinnbauer, Peter

    2011-01-01

    The superiority of learner-paced over system-paced instructions was demonstrated in multiple experiments. In these experiments, the system-paced presentations were highly speeded, causing cognitive overload, while the learner-paced instructions allowed adjustments of the presentational flow to the learner's needs by pacing facilities, mostly…

  2. OER Usage by Instructional Designers and Training Managers in Corporations

    Directory of Open Access Journals (Sweden)

    Anat Cohen

    2015-12-01

    Full Text Available Since the development of Open Educational Resources (OERs, different models regarding the usage of these resources in education have appeared in the literature. Wiley’s 4-Rs model is considered to be one of the leading models. Research based on Wiley’s model shows that using materials without making changes is the most common use. Compared to the extensive literature regarding OER usage in education, the literature barely deals with OER usage by instructional designers or training managers in corporations. The purpose of this research is to examine the OER usage of these two stakeholders, distinguishing between Little and Big OER repositories, in which Little OER repositories such as YouTube and Wikipedia aren’t necessarily designed to fulfill educational purposes. Findings show that these stakeholders almost use only Little repositories and that their usage level is higher than what is documented in the literature: they mostly Revise–modify the form of the resource, and Remix–combine different resources to create new ones. These differences can be explained by the fact that materials from Little OER repositories are raw materials, requiring further editing and adjustment. Significant differences between instructional designers’ and training managers’ usage of OERs were found regarding the Reuse level of resources from internal repositories and the Google Images repository, and the frequency of this Reuse.

  3. Cognitive Load Theory, Educational Research, and Instructional Design: Some Food for Thought

    Science.gov (United States)

    de Jong, Ton

    2010-01-01

    Cognitive load is a theoretical notion with an increasingly central role in the educational research literature. The basic idea of cognitive load theory is that cognitive capacity in working memory is limited, so that if a learning task requires too much capacity, learning will be hampered. The recommended remedy is to design instructional systems…

  4. Modifying ADDIE: Incorporating New Technologies in Library Instruction

    Science.gov (United States)

    Campbell, Paul Clayton

    2014-01-01

    There are many instructional design theories to assist librarians in creating effective instructional modules for student learning. ADDIE is a generic instructional design model that has been in existence for more than 30 years and is known for its flexibility in application (Molenda, 2003). Using instructional design theories such as ADDIE helps…

  5. STEM Teachers' Planned and Enacted Attempts at Implementing Engineering Design-Based Instruction

    Science.gov (United States)

    Capobianco, Brenda M.; Rupp, Madeline

    2014-01-01

    This study investigates grades 5 and 6 science, technology, engineering, and mathematics (STEM) teachers' planned and actualized engineering design-based instruction, the instruments used to characterize their efforts, and the implications this work has for teachers' implementations of an integrated approach to STEM education.…

  6. Handbook of Research on Instructional Systems and Educational Technology

    Science.gov (United States)

    Kidd, Terry, Ed.; Morris, Lonnie R., Jr., Ed.

    2017-01-01

    Incorporating new methods and approaches in learning environments is imperative to the development of education systems. By enhancing learning processes, education becomes more attainable at all levels. "The Handbook of Research on Instructional Systems and Educational Technology" is an essential reference source for the latest scholarly…

  7. Slowing Entropy: Instructional Policy Design in New York City, 2011-12. Policy Brief #14-3

    Science.gov (United States)

    Supovitz, Jonathan

    2014-01-01

    How do policymakers craft policies, particularly centered on the Common Core State Standards, to be more resilient and less likely to disintegrate during enactment? Researcher Jonathan Supovitz in "Slowing Entropy: Instructional Policy Design in New York City, 2011-12" examines the design of a New York City Department of Education policy…

  8. DESIGN AND DEVELOPMENT OF AN INTELLIGENT INSTRUCTIVE SYSTEM: Scholastic Tutor (St*

    Directory of Open Access Journals (Sweden)

    Adebiyi MARION O.

    2011-10-01

    Full Text Available Intelligent Tutoring Systems (ITS is an act of impacting knowledge while computer teaches or acts as the tutors which is a supplement to human teachers. The ability to teach each student based on their individual abilities a major advantage posed by ITS and that is why it is being embraced in this work. This work describes the design of an Intelligent Tutoring System that was tagged Scholastic tutor (St*, which has the individual learning and collaborative problem-solving modules. The individual tutoring module was designed to provide appropriate lessons to individuals based on his/her background knowledge level, interest, and learning style and assimilation rate prior to using the tutoring system. A software agent is used to monitor and process these parameters, arrange the learning topic, and exercises, for each individual. The collaborative problem-based tutoring module was designed to present tutorial problems and provides facilities to assist learners with some useful information and advice for problem solving. This is because the present lecturing methodology which is the conventional teaching methodology provides an interactive classroom setting that promotes the open exchange of ideas and allows for the lecturer to communicate directly with the students but has a great disadvantage of not teaching all the students according to their own learning rate and pace. The intelligent tutor solves this problem by providing individualised learning for each student where they can learn according to their own pace and learning abilities it will provide remedy and advice when learners encounter difficulties during learning session. The classical model of ITS architecture has four main modules; domain model, student model, tutoring model and the user interface model.

  9. An Investigation of Psychological Typology as an Intervening Variable in the Implementation of a Computer Managed Instruction System. Technical Report No. 454.

    Science.gov (United States)

    Bozeman, William C.

    This study explores the relationships between psychological types of users as identified by the Myers-Briggs Type Indicator and factors associated with the implementation and utilization of the Wisconsin System for Instructional Management (WIS-SIM), a computer management information system designed to support management processes in…

  10. Instructional Design to Measure the Efficacy of Interactive E-Books in a High School Setting

    Science.gov (United States)

    Pabrua Batoon, Maria Victoria; Glasserman Morales, Leonardo David; Yanez Figueroa, Jose Antonio

    2018-01-01

    This article describes a qualitative research analysis on the implementation of interactive ebooks in high school courses using a case study approach. The subjects of the study included seven professors and 16 freshmen who were surveyed and interviewed with a questionnaire designed according to the Kemp Model of Instructional Design. The study…

  11. CAI多媒體教學軟體之開發模式 Using an Instructional Design Model for Developing a Multimedia CAI Courseware

    Directory of Open Access Journals (Sweden)

    Hsin-Yih Shyu

    1995-09-01

    Full Text Available 無This article outlined a systematic instructional design model for developing a multimedia computer-aided instruction (CAI courseware. The model illustrated roles and tasks as two dimensions necessary in a CAI production teamwork. Four major components (Analysis, Design, Development, and Revise/Evaluation following by totally 25 steps are provided. Eight roles with each competent skills were identified. The model will be useful in serving as a framework for developing a mulrimedia CAI courseware for educators, instructional designers and CAI industry developers.

  12. Evaluation of Instructional Systems RUPS and TABA. Final Report.

    Science.gov (United States)

    O'Neill, Phillip M.

    An investigation was conducted to determine the extent of dissemination of the Research Utilizing Problem Solving (Rups) and Development of Higher Level Thinking Abilities (TABA) instructional systems developed by the Northwest Regional Laboratory (NWREL), the degree of conformity between the RUPS and TABA systems as developed and as used in the…

  13. The Endocrine System [and] Instructor's Guide: The Endocrine System. Health Occupations Education Module: Instructional Materials in Anatomy and Physiology for Pennsylvania Health Occupations Programs.

    Science.gov (United States)

    National Evaluation Systems, Inc., Amherst, MA.

    This module on the endocrine system is one of 17 modules designed for individualized instruction in health occupations education programs at both the secondary and postsecondary levels. It is part of an eight-unit miniseries on anatomy and physiology within the series of 17 modules. Following a preface which explains to the student how to use the…

  14. ASIE Model: An Innovative Instructional Design Model for Teachers in Enhancing and Sustaining the Quality of the 21st Century Learning

    Directory of Open Access Journals (Sweden)

    Ismail Md Zain

    2017-04-01

    Full Text Available An effective and systematic design of instruction will determine the quality of learning and teaching practices. Hence, instructional design models are required, to move from just adopting a standard approach to developing models that have an impact on learners' profiles, creating a much better learning experience, skills, and knowledge both in the classroom and online. The 21st Century Learning Framework requires learners to develop their thinking skills, communication skills, collaborating skills and enhancing their creativity, (4Cs towards establishing "globally competitive learners." An Integral ASIE Instructional Design Model is an innovative 21st Century teachers' designing tool that provides a solution to the above challenges. The Model assist teachers in Planning, Utilizing and Sharing (PLUS instructions with others across nations. It promotes the Professional Learning Community practices where educationist, stakeholders, parents, and corporates work collaboratively ensuring its quality and sustainability in addressing the future employability issues of the learners. Results from 5 Likert Scales Questionnaires given to teachers in workshops and pilot project conducted, shows positive views on the model.

  15. An Instructional Design Framework to Improve Student Learning in a First-Year Engineering Class

    Science.gov (United States)

    Yelamarthi, Kumar; Drake, Eron; Prewett, Matthew

    2016-01-01

    Increasingly, numerous universities have identified benefits of flipped learning environments and have been encouraging instructors to adapt such methodologies in their respective classrooms, at a time when departments are facing significant budget constraints. This article proposes an instructional design framework utilized to strategically…

  16. Is it Possible to Design a Math-Art Instructional Practice? Cases of Pre-service Teachers

    Directory of Open Access Journals (Sweden)

    Işıkhan UĞUREL

    2013-10-01

    Full Text Available To many people, establishing relationships between mathematics and art is difficult or surprising. However, these two disciplines are quite interrelated. Today, the literature of mathematics reveals that there has been an increasing interest in interaction between these two disciplines. As also observed in our country, the studies on relationships between mathematics and art have gained more popularity in mathematics education. There is a course entitled, “Mathematics and Art” offered as one of elective courses and taught for ten years to juniors of the Department of Secondary Mathematics Education, Dokuz Eylül University. The course covers a wide range of activities derived from relationships between mathematics and music to activities derived from those between mathematics and handicraft. In this study, cases of pre-service teachers attending this course were analysed. They were asked to do an instructional design integrating mathematics into art at secondary education level. Their designs were analyzed based on the use of art in which contexts and for what purposes. Furthermore, their designs were analyzed in terms of whether they enhance learning. This qualitative study had a case study design. The participants were 43 pre-service mathematics teachers voluntarily selected from students taking the course. Descriptive analysis was done to analyze the data. As a consequence of the analysis, math-art instructional practices developed by pre-service teachers were clustered under three primary categories (good, average and inadequate. The majority of math-art instructional practices were categorized under the average category. In the study, these categories were described and cases in each category were discussed.

  17. Developing Elementary Math and Science Process Skills Through Engineering Design Instruction

    Science.gov (United States)

    Strong, Matthew G.

    This paper examines how elementary students can develop math and science process skills through an engineering design approach to instruction. The performance and development of individual process skills overall and by gender were also examined. The study, preceded by a pilot, took place in a grade four extracurricular engineering design program in a public, suburban school district. Students worked in pairs and small groups to design and construct airplane models from styrofoam, paper clips, and toothpicks. The development and performance of process skills were assessed through a student survey of learning gains, an engineering design packet rubric (student work), observation field notes, and focus group notes. The results indicate that students can significantly develop process skills, that female students may develop process skills through engineering design better than male students, and that engineering design is most helpful for developing the measuring, suggesting improvements, and observing process skills. The study suggests that a more regular engineering design program or curriculum could be beneficial for students' math and science abilities both in this school and for the elementary field as a whole.

  18. Applying Instructional Design Strategies and Behavior Theory to Household Disaster Preparedness Training.

    Science.gov (United States)

    Thomas, Tracy N; Sobelson, Robyn K; Wigington, Corinne J; Davis, Alyson L; Harp, Victoria H; Leander-Griffith, Michelle; Cioffi, Joan P

    Interventions and media campaigns promoting household disaster preparedness have produced mixed results in affecting behaviors. In large part, this is due to the limited application of instructional design strategies and behavior theory, such as the Transtheoretical Model (TTM). This study describes the development and evaluation of Ready CDC, an intervention designed to increase household disaster preparedness among the Centers for Disease Control and Prevention (CDC) workforce. (1) Describe the instructional design strategies employed in the development of Ready CDC and (2) evaluate the intervention's impact on behavior change and factors influencing stage progression for household disaster preparedness behavior. Ready CDC was adapted from the Federal Emergency Management Agency's (FEMA's) Ready campaign. Offered to CDC staff September 2013-November 2015, it consisted of a preassessment of preparedness attitudes and behaviors, an in-person training, behavioral reinforcement communications, and a 3-month follow-up postassessment. Ready CDC employed well-accepted design strategies, including presenting stimulus material and enhancing transfer of desired behavior. Excluding those in the TTM "maintenance" stage at baseline, this study determined 44% of 208 participants progressed at least 1 stage for developing a written disaster plan. Moreover, assessment of progression by stage found among participants in the "precontemplation" (n = 16), "contemplation" (n = 15), and "preparation" (n = 125) stages at baseline for assembling an emergency kit, 25%, 27%, and 43% moved beyond the "preparation" stage, respectively. Factors influencing stage movement included knowledge, attitudes, and community resiliency but varied depending on baseline stage of change. Employing instructional strategies and behavioral theories in preparedness interventions optimizes the potential for individuals to adopt preparedness behaviors. Study findings suggest that stage movement toward

  19. An Instructional Systems Approach or FAA Student Centered Training.

    Science.gov (United States)

    Federal Aviation Administration (DOT), Washington, DC.

    The Federal Aviation Administration (FAA) Academy has been using a systems approach as part of its training program since 1969. This booklet describes the general characteristics of an instructional system and explains the steps the FAA goes through in implementing the approach. These steps are: 1) recognize a need for training, 2) specify the…

  20. The Personalized System of Instruction: Review and Applications to Distance Education

    Directory of Open Access Journals (Sweden)

    Lyle Grant

    2003-10-01

    Full Text Available The present paper a outlines the basic features of the Personalized System of Instruction (PSI; b provides a brief history of PSI; and c describes the application of PSI to distance education. Some common misconceptions about PSI are also addressed. PSI is presented as a helpful universally applicable set of instructional practices that are well suited to distance teaching and learning.

  1. A remote instruction system empowered by tightly shared haptic sensation

    Science.gov (United States)

    Nishino, Hiroaki; Yamaguchi, Akira; Kagawa, Tsuneo; Utsumiya, Kouichi

    2007-09-01

    We present a system to realize an on-line instruction environment among physically separated participants based on a multi-modal communication strategy. In addition to visual and acoustic information, commonly used communication modalities in network environments, our system provides a haptic channel to intuitively conveying partners' sense of touch. The human touch sensation, however, is very sensitive for delays and jitters in the networked virtual reality (NVR) systems. Therefore, a method to compensate for such negative factors needs to be provided. We show an NVR architecture to implement a basic framework that can be shared by various applications and effectively deals with the problems. We take a hybrid approach to implement both data consistency by client-server and scalability by peer-to-peer models. As an application system built on the proposed architecture, a remote instruction system targeted at teaching handwritten characters and line patterns on a Korea-Japan high-speed research network also is mentioned.

  2. Logic Programs as a Specification and Description Tool in the Design Process of an Intelligent Tutoring System

    OpenAIRE

    Möbus, Claus

    1987-01-01

    We propose the use of logic programs when designing intelligent tutoring systems. With their help we specified the small-step semantics of the learning curriculum, designed the graphical user interface, derived instructions and modelled students' knowledge.

  3. The design of instructional tools affects secondary school students' learning of cardiopulmonary resuscitation (CPR) in reciprocal peer learning: a randomized controlled trial.

    Science.gov (United States)

    Iserbyt, Peter; Byra, Mark

    2013-11-01

    Research investigating design effects of instructional tools for learning Basic Life Support (BLS) is almost non-existent. To demonstrate the design of instructional tools matter. The effect of spatial contiguity, a design principle stating that people learn more deeply when words and corresponding pictures are placed close (i.e., integrated) rather than far from each other on a page was investigated on task cards for learning Cardiopulmonary Resuscitation (CPR) during reciprocal peer learning. A randomized controlled trial. A total of 111 students (mean age: 13 years) constituting six intact classes learned BLS through reciprocal learning with task cards. Task cards combine a picture of the skill with written instructions about how to perform it. In each class, students were randomly assigned to the experimental group or the control. In the control, written instructions were placed under the picture on the task cards. In the experimental group, written instructions were placed close to the corresponding part of the picture on the task cards reflecting application of the spatial contiguity principle. One-way analysis of variance found significantly better performances in the experimental group for ventilation volumes (P=.03, ηp2=.10) and flow rates (P=.02, ηp2=.10). For chest compression depth, compression frequency, compressions with correct hand placement, and duty cycles no significant differences were found. This study shows that the design of instructional tools (i.e., task cards) affects student learning. Research-based design of learning tools can enhance BLS and CPR education. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

  4. Designing Preclinical Instruction for Psychomotor Skills (II)--Instructional Engineering: Task Analysis.

    Science.gov (United States)

    Knight, G. William; And Others

    1994-01-01

    The first step in engineering the instruction of dental psychomotor skills, task analysis, is explained. A chart details the procedural, cognitive, desired-criteria, and desired-performance analysis of a single task, occlusal preparation for amalgam restoration with carious lesion. (MSE)

  5. Motivational elements in user instructions

    NARCIS (Netherlands)

    Loorbach, N.R.

    2013-01-01

    Concerning the design of user instructions, two view can be distinguished. The traditional view considers instructions as purely instrumental documents. The more and more emerging affective view still assumes that above all, instructions should enable readers to perform tasks. But in order to

  6. OBE EAP-EOP Model: A Proposed Instructional Design in English for Specific Purposes

    Science.gov (United States)

    Hernandez, Hjalmar Punla

    2016-01-01

    Outcome-Based Education (OBE) demands innovative Instructional Designs (ID) in the 21st century. Being a descriptive-qualitative research, this paper aimed to (1) identify the ID used in the English language curricula of a private tertiary level institution in the Southern Luzon, Philippines, (2) determined the elements that the ID of the English…

  7. Design Approach and Implementation of Application Specific Instruction Set Processor for SHA-3 BLAKE Algorithm

    Science.gov (United States)

    Zhang, Yuli; Han, Jun; Weng, Xinqian; He, Zhongzhu; Zeng, Xiaoyang

    This paper presents an Application Specific Instruction-set Processor (ASIP) for the SHA-3 BLAKE algorithm family by instruction set extensions (ISE) from an RISC (reduced instruction set computer) processor. With a design space exploration for this ASIP to increase the performance and reduce the area cost, we accomplish an efficient hardware and software implementation of BLAKE algorithm. The special instructions and their well-matched hardware function unit improve the calculation of the key section of the algorithm, namely G-functions. Also, relaxing the time constraint of the special function unit can decrease its hardware cost, while keeping the high data throughput of the processor. Evaluation results reveal the ASIP achieves 335Mbps and 176Mbps for BLAKE-256 and BLAKE-512. The extra area cost is only 8.06k equivalent gates. The proposed ASIP outperforms several software approaches on various platforms in cycle per byte. In fact, both high throughput and low hardware cost achieved by this programmable processor are comparable to that of ASIC implementations.

  8. Instructional design in the development of an online course on Basic Life Support.

    Science.gov (United States)

    Tobase, Lucia; Peres, Heloisa Helena Ciqueto; Almeida, Denise Maria de; Tomazini, Edenir Aparecida Sartorelli; Ramos, Meire Bruna; Polastri, Thatiane Facholi

    2018-03-26

    To develop and evaluate an online course on Basic Life Support. Technological production research of online course guided by the ADDIE (Analysis, Design, Development, Implementation, Evaluation) instructional design model based on Andragogy and the Meaningful Learning Theory. The online course was constructed in the platform Moodle, previously assessed by a group of experts, and then presented to the students of the Nursing School of the University of São Paulo, who assessed it at the end of the course. The course was evaluated by the experts and obtained a mean score of 0.92 (SD 0.15), considered as good quality (between 0.90-0.94), and by the students, with a mean score of 0.95 (SD 0.03), considered as high quality (0.95-1.00). The instructional design used was found to be appropriate to the development of the online course. As an active educational strategy, it contributed to the learning on Basic Life Support during cardiac arrest-related procedures in adults. In view of the need for technological innovations in education and systematization of care in cardiopulmonary resuscitation, the online course allows the establishment of continuous improvement processes in the quality of resuscitation in the care provided by students and professionals.

  9. Instructional design in the development of an online course on Basic Life Support

    Directory of Open Access Journals (Sweden)

    Lucia Tobase

    2018-03-01

    Full Text Available ABSTRACT Objective To develop and evaluate an online course on Basic Life Support. Method Technological production research of online course guided by the ADDIE (Analysis, Design, Development, Implementation, Evaluation instructional design model based on Andragogy and the Meaningful Learning Theory. The online course was constructed in the platform Moodle, previously assessed by a group of experts, and then presented to the students of the Nursing School of the University of São Paulo, who assessed it at the end of the course. Results The course was evaluated by the experts and obtained a mean score of 0.92 (SD 0.15, considered as good quality (between 0.90-0.94, and by the students, with a mean score of 0.95 (SD 0.03, considered as high quality (0.95-1.00. Conclusion The instructional design used was found to be appropriate to the development of the online course. As an active educational strategy, it contributed to the learning on Basic Life Support during cardiac arrest-related procedures in adults. In view of the need for technological innovations in education and systematization of care in cardiopulmonary resuscitation, the online course allows the establishment of continuous improvement processes in the quality of resuscitation in the care provided by students and professionals.

  10. Evaluation of iTunes University Courses through Instructional Design Strategies and m-Learning Framework

    Science.gov (United States)

    Tseng, Hung Wei; Tang, Yingqi; Morris, Betty

    2016-01-01

    As mobile learning technology promotes learning accessibility and flexibility, students benefit from social interactivity and connective learning process which will also foster students' performance and satisfaction on learning content. The primary purpose of this research was to evaluate iTunes U courses based on instructional design strategies…

  11. An Instructional Design Framework to Improve Student Learning in a First-Year Engineering Class

    Directory of Open Access Journals (Sweden)

    Kumar Yelamarthi

    2016-12-01

    Full Text Available Increasingly, numerous universities have identified benefits of flipped learning environments and have been encouraging instructors to adapt such methodologies in their respective classrooms, at a time when departments are facing significant budget constraints. This article proposes an instructional design framework utilized to strategically enhance traditional flipped methodologies in a first-year engineering course, by using low-cost technology aids and proven pedagogical techniques to enhance student learning. Implemented in a first-year engineering course, this modified flipped model demonstrated an improved student awareness of essential engineering concepts and improved academic performance through collaborative and active learning activities, including flipped learning methodologies, without the need for expensive, formal active learning spaces. These findings have been validated through two studies and have shown similar results confirming that student learning is improved by the implementation of multi-pedagogical strategies in-formed by the use of an instructional design in a traditional classroom setting.

  12. Site-specific waste management instruction - 200-ZP-1 pump-and-treat system

    International Nuclear Information System (INIS)

    Hopkins, G.G.

    1997-01-01

    This Site-Specific Waste Management Instruction (SSWMI) provides guidance for managing waste generated from operation of the 200-ZP-1 Pump-and-Treat (P and T) System, located just north of the Plutonium Finishing Plant in the 200 West Area. The construction and implementation of the 200-ZP-1 P and T System are an integral part of the 200-ZP-1 interim remedial measure activities. The goal of the interim remedial measure activities is to reduce further migration of carbon tetrachloride (CCl 4 ), chloroform, and trichloroethylene (TCE) in the groundwater of the 200 West Area. The P and T system is designed to initiate hydraulic containment of the contaminant mass in the high-concentration portion of the CCl 4 plume. The P and T contaminant removal mechanism consists of a combination of air stripping and vapor-phase granular activated carbon (GAC) adsorption technologies

  13. Development and Implementation of an Instructional Design for Effective Teaching of Ecosystem, Biodiversity, and Environmental Issues

    Science.gov (United States)

    Yucel, Elif Ozata; Ozkan, Muhlis

    2015-01-01

    This study aims to develop an instructional design whereby ecosystem, biodiversity, and environmental issues are addressed with a holistic approach that provides more efficient teaching as well as to test the effectiveness of this design. A literature review was carried out and need-assessment was firstly made using the Readiness Test. This review…

  14. School System (Re)design: Developing Educational Infrastructures to Support School Leadership and Teaching Practice

    Science.gov (United States)

    Hopkins, Megan; Woulfin, Sarah L.

    2015-01-01

    A central challenge for local education agencies (i.e., school districts in the United States) undergoing reform is to design systems that facilitate instructional improvement. At the core of these systems are educational infrastructures that bolster capacity building efforts and support teaching and leadership practices. Our goal for this special…

  15. Wisconsin System for Instructional Management: Teachers' Manual for the Unified System. Practical Paper No. 18.

    Science.gov (United States)

    Bozeman, William C.; And Others

    Individualized instruction including continuous progress education and team teaching requires a complexity of organizational structure dissimilar to that of traditional schools. In such systems, teachers must maintain extensive and complex student record systems. This teachers' manual provides an example of a computerized record system developed…

  16. Designing Reading Instruction for Cultural Minorities: The Case of the Kamehameha Early Education Program.

    Science.gov (United States)

    Calfee, Robert C.; And Others

    This is a report on the Kamehameha Early Education Program (KEEP), a research and development project designed to find ways of improving the school performance of educationally disadvantaged Hawaiian children. The project, implemented in a laboratory school setting and continuously monitored, is described as a reading instruction program for…

  17. Is the Flipped Classroom Model for All? Correspondence Analysis from Trainee Instructional Media Designers

    Science.gov (United States)

    Pellas, Nikolaos

    2018-01-01

    The educational potentials and challenges of "flipping" a classroom are today well-documented. However, taking into account the contradictory results, literature on the benefits in using the flipped model as a socially inclusive technology-supported instructional design model is still in its infancy. This study seeks to investigate the…

  18. Instructional Design to Measure the Efficacy of Interactive E-Books in A High School Setting

    Directory of Open Access Journals (Sweden)

    Maria Victoria PABRUA BATOON

    2018-04-01

    Full Text Available This article describes a qualitative research analysis on the implementation of interactive e-books in high school courses using a case study approach. The subjects of the study included seven professors and 16 freshmen who were surveyed and interviewed with a questionnaire designed according to the Kemp Model of Instructional Design. The study revealed that participants use interactive e-books as a technological educational resource. The professors pointed out that the design of the interactive e-books helped students develop essential learning skills: technological ability, reading and writing skills, as well as cognition and metacognition abilities. Furthermore, the students noted that the use of interactive e-books has a positive effect on their grades due to its high audio and visual contents. However, the students indicated that they were allured to chat, to play or to navigate in their mobile device while they were using it. Finally, this study can contribute to the relative knowledge about the use of mobile technology in education, as well as, it aids the professor to make a reflection about the Instructional Design of the educational technological resources used in the classroom to promote better result in the process of learning.

  19. Instructional Design "Postpartum Fitness” for Midwife Staff of Shemiranat (Tehran, Iran Health Network

    Directory of Open Access Journals (Sweden)

    Rita Rahmati Roodsari

    2018-01-01

    Full Text Available Background: One of the postpartum cares lives is supporting and encouraging them more to exercise after delivery and monitoring them. Health care workers, particularly midwives have a great role in the promotion of sport activity. Purpose of this study is Designed training for "postpartum fitness" by Roth well approach for midwives at health network in Shemiranat.Materials and Methods: This research is kind of Instructional design. Sampling was done by using census method Data collection was done by multiple choice tests for knowledge and attitudes of questionnaire and practical assessment exercise was part. After assessment and instructional design and was done Roth well model and Ganyh strategies.Results: Average response to questions in the cognitive domain was 49%. In this study 92% of the employees have positive attitude to importance and impact of the study. The result of the data related to the workplace of participants is health centers (53.3%. Most frequency is for who has less than 5 years’ work experience (50%and most frequency is for official staff (43.3%, most educational level related to bachelors (83.3% and the highest age rate is between 30-40 years old (40%.Conclusion: Positive attitude towards this issue and earn score below %80 indicates a need for staff to learn and raise awareness about the above topic. Create knowledge, training, counseling mothers about this issue are the midwife duties. This reflects a greater emphasis on design education.

  20. Richardson Instructional Management System (RIMS). How to Blend a Computerized Objectives-Referenced Testing System, Distributive Data Processing, and Systemwide Evaluation.

    Science.gov (United States)

    Riegel, N. Blyth

    Recent changes in the structure of curriculum and the instructional system in Texas have required a major reorganization of teaching, evaluating, budgeting, and planning activities in the local education agencies, which has created the need for a database. The history of Richardson Instructional Management System (RIMS), its data processing…

  1. An Evaluation of the Instructional System in Mathematics: 1977-1978.

    Science.gov (United States)

    Frechtling, Joy A.; And Others

    The results of an evaluation of various aspects of the Instructional System in Mathematics (ISM) are presented. ISM is an objectives-based, computer-supported, management system which builds upon a previously developed mathematics curriculum. Questionnaires to school-based personnel and students, in-school observations, and interviews, were used…

  2. Elementary Students' Learning of Materials Science Practices through Instruction Based on Engineering Design Tasks

    Science.gov (United States)

    Wendell, Kristen Bethke; Lee, Hee-Sun

    2010-01-01

    Materials science, which entails the practices of selecting, testing, and characterizing materials, is an important discipline within the study of matter. This paper examines how third grade students' materials science performance changes over the course of instruction based on an engineering design challenge. We conducted a case study of nine…

  3. The Design and Realization of Virtual Machine of Embedded Soft PLC Running System

    Directory of Open Access Journals (Sweden)

    Qingzhao Zeng

    2014-11-01

    Full Text Available Currently soft PLC has been the focus of study object for many countries. Soft PLC system consists of the developing system and running system. A Virtual Machine is an important part in running system even in the whole soft PLC system. It explains and performs intermediate code generated by the developing system and updates I/O status of PLC in order to complete its control function. This paper introduced the implementation scheme and execution process of the embedded soft PLC running system Virtual Machine, and mainly introduced its software implementation method, including the realization of the input sampling program, the realization of the instruction execution program and the realization of output refresh program. Besides, an operation code matching method was put forward in the instruction execution program design. Finally, the test takes PowerPC/P1010 (Freescale as the hardware platform and Vxworks as the operating system, the system test result shows that accuracy, the real-time performance and reliability of Virtual Machine.

  4. Application of Instructional Design Principles in Developing an Online Information Literacy Curriculum.

    Science.gov (United States)

    Mi, Misa

    2016-01-01

    An online information literacy curriculum was developed as an intervention to engage students in independent study and self-assessment of their learning needs and learning outcomes, develop proficiency in information skills, and foster lifelong learning. This column demonstrates how instructional design principles were applied to create the learning experiences integrated into various courses of the medical curriculum to promote active learning of information skills and maximize self-directed learning outcomes for lifelong learning.

  5. ASIE Model: An Innovative Instructional Design Model for Teachers in Enhancing and Sustaining the Quality of the 21st Century Learning

    OpenAIRE

    Ismail Md Zain

    2017-01-01

    An effective and systematic design of instruction will determine the quality of learning and teaching practices. Hence, instructional design models are required, to move from just adopting a standard approach to developing models that have an impact on learners' profiles, creating a much better learning experience, skills, and knowledge both in the classroom and online. The 21st Century Learning Framework requires learners to develop their thinking skills, communication skills, collaborating ...

  6. Design Models as Emergent Features: An Empirical Study in Communication and Shared Mental Models in Instructional

    Science.gov (United States)

    Botturi, Luca

    2006-01-01

    This paper reports the results of an empirical study that investigated the instructional design process of three teams involved in the development of an e-­learning unit. The teams declared they were using the same fast-­prototyping design and development model, and were composed of the same roles (although with a different number of SMEs).…

  7. The Instructional Design of Case Method Combined With Role-Playing in the Soil and Groundwater Training Courses

    Directory of Open Access Journals (Sweden)

    Mei-Yin Hwa

    2013-12-01

    Full Text Available Almost all environmental problems are caused by human. Besides being good at environmental engineering theory and technology, to enhance the ability to solve environmental problems, the environmental practitioners need a closer understanding of the stance of different stakeholders. This study is an instructional design combining both "case method" and "role-playing" into the “Soil and Groundwater Talent Training Courses” in Taipei. The curriculum is based on the hexavalent chromium pollution case in Yunlin County. Each group of students is encouraged to play four roles, inculding leather factory owners, farmers, environmental officials, and soil testing professionals. Each group of students has to propose solution strategies after discussion and consultation. The study adopts a single group posttest design. The qualitative data were analyzed using content analysis. The quantitative data were analyzed through proportion and Pearson correlation. Results were as follows: (1 The solution strategies identified by the students include: “mutual communication”, “consensus-building”, and “the formation of an environmental committee". (2 More than 80% of students were satisfied with the instruction, and they found it helpful in terms of knowledge and skills in doing surveying. A moderate positive correlation exists between students’ participation and learning satisfaction. A reflection concerning this instruction design along with some recommendations are provided.

  8. Interactive orbital proximity operations planning system instruction and training guide

    Science.gov (United States)

    Grunwald, Arthur J.; Ellis, Stephen R.

    1994-01-01

    This guide instructs users in the operation of a Proximity Operations Planning System. This system uses an interactive graphical method for planning fuel-efficient rendezvous trajectories in the multi-spacecraft environment of the space station and allows the operator to compose a multi-burn transfer trajectory between orbit initial chaser and target trajectories. The available task time (window) of the mission is predetermined and the maneuver is subject to various operational constraints, such as departure, arrival, spatial, plume impingement, and en route passage constraints. The maneuvers are described in terms of the relative motion experienced in a space station centered coordinate system. Both in-orbital plane as well as out-of-orbital plane maneuvering is considered. A number of visual optimization aids are used for assisting the operator in reaching fuel-efficient solutions. These optimization aids are based on the Primer Vector theory. The visual feedback of trajectory shapes, operational constraints, and optimization functions, provided by user-transparent and continuously active background computations, allows the operator to make fast, iterative design changes that rapidly converge to fuel-efficient solutions. The planning tool is an example of operator-assisted optimization of nonlinear cost functions.

  9. Instructional Uses of the Lexile Framework.

    Science.gov (United States)

    Stenner, A. Jackson

    The Lexile Framework provides teachers with tools to help them link the results of reading assessment with subsequent instruction, focuses on appropriate-level curriculum for readers at all educational levels, and is designed to be flexible enough to use alongside any type of reading program. Suggested areas for application of this system include:…

  10. The Creativity Dimension of Instructional Materials Designed by Prospective Teachers: The Comparison across Domains

    Directory of Open Access Journals (Sweden)

    Ersoy Esen

    2017-01-01

    Full Text Available This study aims at revealing the creativity dimension of the materials designed and developed by the second year students studying at the department of Computer Education and Instructional Technology. A part of the participants has completed the process by designing materials in their own field, information technologies; while some of them have done so by designing materials in the field of mathematics. The data have been retrieved from an experimental study of 13 weeks. “Teaching Material Creativity Rubric” developed by the researchers, has been used as the data collection tool. The rubric has been developed in order to evaluate the creativity dimensions of products. While developing the rubric, the creative product evaluation dimensions of [14] have been a source of inspiration. The products developed by the students have been evaluated through the retrieved data, in terms of their creativity. The rubric developed includes Originality, Practicality & Sensibility, Productivity & Flexibility, Feasibility, Inclusiveness, and Insightfulness dimensions. In this research, the data of the aforementioned dimensions and sub-dimensions have been evaluated. The results present that the creativity level of the products on teaching information technologies, which have been developed by Computer Education and Instructional Technology (CEIT students, is high. It has been argued that the creativity of domain-specifically developed materials is higher, through literature. Keywords: Material Design in Computers, Mathematics Teaching, Originality, Applicability, Creativity, Creativity and Domainswords.

  11. What do Sharable Instructional Objects Have to do With Intelligent Tutoring Systems, and Vice Versa?

    National Research Council Canada - National Science Library

    Fletcher, J

    2001-01-01

    By reviewing data on classroom and tutorial instruction, this document presents a perspective on the value ot technology-based instruction in general and intelligent tutoring systems (ITSs) in particular...

  12. Evaluation of the TSC Dolphin Computer Assisted Instructional System in the Chapter 1 Program of the District of Columbia Public Schools. Final Report 85-9.

    Science.gov (United States)

    Harris, Carolyn DeMeyer; And Others

    Dolphin is a computer-assisted instruction system used to teach and reinforce skills in reading, language arts, and mathematics. An evaluation of this system was conducted to provide information to TSC Division of Houghton Mifflin regarding its effectiveness and possible modifications to the system. The general design of the evaluation was to…

  13. Teaching for physical literacy: Implications to instructional design and PETE

    Directory of Open Access Journals (Sweden)

    Stephen Silverman

    2015-06-01

    Full Text Available Physical education teachers play an important role in helping students' development of the motor skills needed to be physically literate individuals. Research suggests that teacher made instructional design decisions can lead to enhanced motor skill learning. After presenting a model of evidence-based research this paper presents information that will help teachers plan and execute lessons designed to improve students' motor skills. Variables that impact motor skill learning in physical education including time, type of practice, content, presentation and organizational strategies, and student skill level are presented and discussed. A brief section on student attitudes, their relation to motor skill learning and to physical literacy is included. Motor skills are needed for physically literate people to enjoy lifelong physical activity. Physical education teachers and the decisions they make contribute to students' learning and whether the goal of physical literacy is met.

  14. Design Principles for Online Instruction: A New Kind of Classroom

    Directory of Open Access Journals (Sweden)

    Neil TOPORSKI

    2004-01-01

    Full Text Available In the 1900’s, distance education attempted to mimic the traditional classroom lecture via the transmission of live or “canned” broadcasts, regardless of the technologies used: satellite, television, film, or radio. These kinds of media predisposed DE to closely adhere to the lecture (sit and absorb model, where content was disseminated in about the same time constraints as a traditional class: taught at scheduled times throughout the week–almost anywhere but not always anytime. Moreover, the modes of presentation in classic DE seemed to hinder the kinds of human interactions normally experienced in the traditional classroom, fostering individualized and isolated learning experiences.Online learning is a hybrid between the traditional classroom and the DE experience. Like the traditional classroom, instruction is teacher-facilitated. The student is enrolled in a conventional course with topic (lecture presentations, reading and homework assignments, classroom discussions, and class projects. Unlike the traditional classroom, courses are web-based and distributed from a distance, using an assortment of synchronous and asynchronous computer technologies and offered anywhere and anytime. In this way, online learning is different from the classic DE model by encouraging decentralized and collaborative learning environments. So that in this presentation will be discuss design principles for online instruction as being a new kind of classroom.

  15. Using the DSAP Framework to Guide Instructional Design and Technology Integration in BYOD Classrooms

    Science.gov (United States)

    Wasko, Christopher W.

    2016-01-01

    The purpose of this study was to determine the suitability of the DSAP Framework to guide instructional design and technology integration for teachers piloting a BYOD (Bring Your Own Device) initiative and to measure the impact the initiative had on the amount and type of technology used in pilot classrooms. Quantitative and qualitative data were…

  16. A System for Individualizing Instruction. Practical Answers to U-SAIL Implementation Questions. Monograph No. 4.

    Science.gov (United States)

    Utah System Approach to Individualized Learning Project.

    The U-SAIL system is a practical approach to individualization of instruction in which a problem-solving process is employed to install a program in logical sequential phases. U-SAIL is a nationally validated, successfully replicated, cost-feasible system for individualization of instruction which can be implemented in a variety of settings with…

  17. Supporting Instruction By Defining Conceptual Relevance Of Materials: Alignment Of Resources To An Earth Systems Framework

    Science.gov (United States)

    Menicucci, A. J.; Bean, J. R.

    2017-12-01

    Environmental, geological, and climatological sciences are important facets of physical science education. However, it is often difficult for educators to acquire the necessary resources to facilitate content explanations, and demonstration of the conceptual links between individual lessons. The Understanding Global Change (UGC) Project at the University of California Museum of Paleontology (UCMP) at UC Berkeley is aligning new and existing Earth systems educational resources that are high-quality, interactive and inquiry based. Learning resources are organized by the UGC framework topics (Causes of Change, How the Earth System Works, and Measurable Changes), and focus on exploring topic relationships. Resources are currently aligned with both the UGC framework and the Next Generation Science Standards (NGSS), facilitating broad utility among K-16 educators. The overarching goal of the UGC Project is to provide the necessary resources that guide the construction of coherent, interdisciplinary instructional units. These units can be reinforced through system models, providing visual learning scaffolds for assessments of student content knowledge. Utilizing the central framework of UGC alleviates the long-standing problem of creating coherent instructional units from multiple learning resources, each organized and categorized independently across multiple platforms that may not provide explicit connections among Earth science subjects UGC topic cross listing of learning modules establishes conceptual links. Each resource is linked across several Earth system components, facilitating exploration of relationships and feedbacks between processes. Cross listed topics are therefore useful for development of broad picture learning goals via targeted instructional units. We also anticipate cultivating summaries of the explicit conceptual links explored in each resource from both current teachers and content specialists. Insructional units currated and aligned under the UGC

  18. Design of barrier bucket kicker control system

    Science.gov (United States)

    Ni, Fa-Fu; Wang, Yan-Yu; Yin, Jun; Zhou, De-Tai; Shen, Guo-Dong; Zheng, Yang-De.; Zhang, Jian-Chuan; Yin, Jia; Bai, Xiao; Ma, Xiao-Li

    2018-05-01

    The Heavy-Ion Research Facility in Lanzhou (HIRFL) contains two synchrotrons: the main cooler storage ring (CSRm) and the experimental cooler storage ring (CSRe). Beams are extracted from CSRm, and injected into CSRe. To apply the Barrier Bucket (BB) method on the CSRe beam accumulation, a new BB technology based kicker control system was designed and implemented. The controller of the system is implemented using an Advanced Reduced Instruction Set Computer (RISC) Machine (ARM) chip and a field-programmable gate array (FPGA) chip. Within the architecture, ARM is responsible for data presetting and floating number arithmetic processing. The FPGA computes the RF phase point of the two rings and offers more accurate control of the time delay. An online preliminary experiment on HIRFL was also designed to verify the functionalities of the control system. The result shows that the reference trigger point of two different sinusoidal RF signals for an arbitrary phase point was acquired with a matched phase error below 1° (approximately 2.1 ns), and the step delay time better than 2 ns were realized.

  19. Computer-aided instruction system; Systeme d'enseignement programme par ordinateur

    Energy Technology Data Exchange (ETDEWEB)

    Teneze, Jean Claude

    1968-12-18

    This research thesis addresses the use of teleprocessing and time sharing by the RAX IBM system and the possibility to introduce a dialog with the machine to develop an application in which the computer plays the role of a teacher for different pupils at the same time. Two operating modes are thus exploited: a teacher-mode and a pupil-mode. The developed CAI (computer-aided instruction) system comprises a checker to check the course syntax in teacher-mode, a translator to trans-code the course written in teacher-mode into a form which can be processes by the execution programme, and the execution programme which presents the course in pupil-mode.

  20. Blended/Hybrid Courses: A Review of the Literature and Recommendations for Instructional Designers and Educators

    Science.gov (United States)

    Helms, Samuel A.

    2014-01-01

    This article explores some of the literature on blended/hybrid learning and identifies recommendations for instructional designers and faculty. Terminology and definitions are discussed first including the debate between the words "blended" and "hybrid." A working definition for the article is discussed but the article does not…

  1. Espoused Theory and Theory-in-Use of Instructional Designers in the Use of Constructivism in Online Writing Instruction Programs

    Science.gov (United States)

    Merrell, Cheryl

    2013-01-01

    Online Writing Instruction (OWI) has become a viable educational alternative in online instruction in the K-12 educational community. To continue to effectively compete in a global society, educators have identified a necessity for instruction that replicates real-world situations and problem-solving tasks which is consistent with constructivism.…

  2. The Impact of an Instructional Intervention Designed to Support Development of Stochastic Understanding of Probability Distribution

    Science.gov (United States)

    Conant, Darcy Lynn

    2013-01-01

    Stochastic understanding of probability distribution undergirds development of conceptual connections between probability and statistics and supports development of a principled understanding of statistical inference. This study investigated the impact of an instructional course intervention designed to support development of stochastic…

  3. Development of a system to support welding design of nuclear power plants

    International Nuclear Information System (INIS)

    Kataoka, S.; Okamoto, A.

    1991-01-01

    This paper describes about an expert system that supports engineers to make welding design for nuclear power plants. In the welding design, engineers must consider a lot of things; the weldability of the material, the weld deformation, the residual stress predicted, the strength of the weld joint, the configuration of the structure and so on. For easy consultation, the computer system that can provide advice and information about the welding technology is desirable to the engineers. The system was developed on a personal computer of Macintosh utilizing a card type data base, HyperCard. It supports an engineer in the following tasks. a. Advice using the instance of troubles caused by the welding design. b. Tutorial instruction for the knowledge of welding. c. Recommendation for the welding design. d. Data display of the base metal and the weld. (author)

  4. Learning Designs using Flipped Classroom Instruction | Conception d’apprentissage à l’aide de l’instruction en classe inversée

    Directory of Open Access Journals (Sweden)

    Amber Danielle Mazur

    2015-05-01

    Full Text Available The flipped classroom is an instructional model that leverages technology-enhanced instruction outside of class time in order to maximize student engagement and learning during class time. As part of an action research study, the authors synthesize reflections about three learning designs and how the flipped classroom model can support teaching, learning and assessment through: (1 guided collaborative discussion, (2 tabletop white boarding and (3 the development of augmented reality auras. Principles for teaching effectiveness are used as a lens to guide the reflection on the benefits and challenges with each of the learning designs. Findings suggest that flipped classroom models that emphasize collaborative learning, group work and accessibility can enable and support inquiry-based learning. Recommendations are provided for educators interested in designing learning using a flipped classroom instructional model, as well as suggestions for future action research agendas. La classe inversée est un modèle pédagogique qui met à profit l’apprentissage hors des heures en classe et qui est rehaussé par la technologie pour maximiser l’engagement et l’apprentissage des apprenants en classe. Dans le cadre de cette étude de recherche-action, les auteurs résument les réflexions sur la façon dont le modèle de la classe inversée peut appuyer l’enseignement, l’apprentissage et l’évaluation par la mise en œuvre de trois conceptions d’apprentissage par investigation : 1 discussion collaborative guidée, 2 tableau blanc de table et 3 développement d’auras en réalité augmentée. Les principes d’enseignement de l’efficacité sont utilisés comme optique guidant la réflexion sur les avantages et les défis de chacune des conceptions d’apprentissage. Les conclusions suggèrent que les modèles de classes inversées qui mettent l’accent sur l’apprentissage collaboratif, le travail en groupe et l’accessibilité peuvent

  5. RISC & DSP System Application Design using VHDL

    OpenAIRE

    Rachana Solanki; Vinay Gupta

    2014-01-01

    The Reduced Instruction Set Computer (RISC) processor use fewer instructions with simple constructs, therefore they can be executed much faster within the CPU without having to use memory as often. It reduce execution time by simplifying the instruction set of the computer. The DSP processors are perform the operation such as Discrete Cosine transform (DCT), Inverse DCT, Discrete Fourier Transform (DFT) and Fast Fourier Transform (FFT) are performed by DSP system. This paper represent the des...

  6. Computer-Assisted Instruction: Authoring Languages. ERIC Digest.

    Science.gov (United States)

    Reeves, Thomas C.

    One of the most perplexing tasks in producing computer-assisted instruction (CAI) is the authoring process. Authoring is generally defined as the process of turning the flowcharts, control algorithms, format sheets, and other documentation of a CAI program's design into computer code that will operationalize the simulation on the delivery system.…

  7. Design of a pneumatic system for the development of skills among aeronautics maintenance technology students

    OpenAIRE

    Calderón Pérez, Jorge Luis; Cruz Rico, Oliver; Ospina Martínez, Darwin

    2016-01-01

    Introduction: This article is the result of the “Design and installation of a pneumatic system for Aeronautics Maintenance Technology students’ instruction (TMA)”. The research was conducted during 2014 and 2015 by the Police Aviation School research group (esavi), attached to the National Directorate of Schools (DINAE). Methodology: design and construction of a lab with a pneumatic system for handling aviation materials and structures by the Aeronautics Maintenance Technology students. The p...

  8. The Measurement of Instructional Accomplishments.

    Science.gov (United States)

    Fraley, Lawrence E.; Vargas, Ernest A.

    Instructional System Technology in recent years has been characterized by an increase in individualized instruction and the modularization of the curriculum. In traditional systems the learners are forced to take blocks of instruction the size of entire courses and these are much too large. The courses can now be broken down into conceptual…

  9. Effectiveness of Facebook Based Learning to Enhance Creativity among Islamic Studies Students by Employing Isman Instructional Design Model

    Science.gov (United States)

    Alias, Norlidah; Siraj, Saedah; Daud, Mohd Khairul Azman Md; Hussin, Zaharah

    2013-01-01

    The study examines the effectiveness of Facebook based learning to enhance creativity among Islamic Studies students in the secondary educational setting in Malaysia. It describes the design process by employing the Isman Instructional Design Model. A quantitative study was carried out using experimental method and background survey. The…

  10. Students’ Aesthetics Experience, Creative Self-Efficacy and Creativity: Is Creativity Instruction Effective?

    Directory of Open Access Journals (Sweden)

    Yuan-Cheng Chang

    2016-12-01

    Full Text Available Based on creativity component theory, creativity system theory and creative self-efficacy theory, this study aims to explore the influence of college students’ aesthetics experience and creative self-efficacy on their creativity and the role of creativity instruction as a mediator variable. The participants were 338 college design majors in 50 teams who were working on their graduation exhibitions, and 50 advising professors from departments related to design. Hierarchical Linear Models were applied for analysis. The result showed that instruction on enhancing students’ creative intention positively affect students’ aesthetics experience. Students’ aesthetics experience affects their creativity and creative self-efficacy. Creativity instruction with focus on creativity skills by means of promoting aesthetic attitude, aesthetic understanding, and offering complete experiences had a moderating effect on students’ perception toward creative product. However, there was a negative moderating effect of creative instruction on perceived aesthetic pleasure and students’ perception toward creative product. There was no moderating effect of creative instruction on the relationship between students’ creative self-efficacy and creativity. Accordingly, the study concluded that in order to enhance students’ creativity, universities should stress on the development of students’ aesthetics experiences and re-evaluation of approaches to creativity instruction.

  11. Validation of the Instructional Materials Motivation Survey (IMMS) in a self-directed instructional setting aimed at working with technology

    NARCIS (Netherlands)

    Loorbach, N.R.; Peters, O.; Karreman, Joyce; Steehouder, M.F.

    2015-01-01

    The ARCS Model of Motivational Design has been used myriad times to design motivational instructions that focus on attention, relevance, confidence and satisfaction in order to motivate students. The Instructional Materials Motivation Survey (IMMS) is a 36-item situational measure of people's

  12. Measuring lip force by oral screens Part 2: The importance of screen design, instruction and suction.

    Science.gov (United States)

    Wertsén, Madeleine; Stenberg, Manne

    2017-10-01

    The aim of this study was to find a reliable method for measuring lip force and to find the most important factors that influence the measurements in terms of magnitude and variability. The hypothesis tested was that suction is involved and thus the instruction and the design of the oral screen are of importance when measuring lip force. This is a methodological study in a healthy population. This study was conducted in a general community. The designs of the screens were soft and hard prefabricated screens and 2 semi-individually made with a tube allowing air to pass. The screens and the instructions squeeze or suck were tested on 29 healthy adults, one at a time and on 4 occasions. The test order of the screens was randomized. Data were collected during 4 consecutive days, and the procedure was repeated after 1 month. The participants were 29 healthy adult volunteers. The instruction was an important mean to distinguish between squeezing and sucking. The design of the screen affected the lip force so that it increases in relation to the projected area of the screen. A screen design with a tube allowing air to pass made it possible to avoid suction when squeezing. By measuring with and without allowing air to pass, it was possible to distinguish between suction related and not suction related lip force. The additional screen pressure when sucking was related to the ability to produce a negative intraoral pressure. In conclusion lip force increases in relation to the projected area of the screen, sucking generally increases the measured lip force and the additional screen pressure when sucking is related to the ability to produce a negative intraoral pressure.

  13. Content-Based Instruction Approach In Instructional Multimedia For English Learning

    OpenAIRE

    Farani, Rizki

    2016-01-01

    Content-based Instruction (CBI) is an approach in English learning that integrates certain topic and English learning objectives. This approach focuses on using English competencies as a “bridge” to comprehend certain topic or theme in English. Nowadays, this approach can be used in instructional multimedia to support English learning by using computer. Instructional multimedia with computer system refers to the sequential or simultaneous use of variety of media formats in a given presentatio...

  14. Using the Cognitive Apprenticeship Web-Based Argumentation System to Improve Argumentation Instruction

    Science.gov (United States)

    Tsai, Chun-Yen; Jack, Brady Michael; Huang, Tai-Chu; Yang, Jin-Tan

    2012-01-01

    This study investigated how the instruction of argumentation skills could be promoted by using an online argumentation system. This system entitled "Cognitive Apprenticeship Web-based Argumentation" (CAWA) system was based on cognitive apprenticeship model. One hundred eighty-nine fifth grade students took part in this study. A quasi-experimental…

  15. Towards the design of 3D multiscale instructive tissue engineering constructs: Current approaches and trends.

    Science.gov (United States)

    Oliveira, Sara M; Reis, Rui L; Mano, João F

    2015-11-01

    The design of 3D constructs with adequate properties to instruct and guide cells both in vitro and in vivo is one of the major focuses of tissue engineering. Successful tissue regeneration depends on the favorable crosstalk between the supporting structure, the cells and the host tissue so that a balanced matrix production and degradation are achieved. Herein, the major occurring events and players in normal and regenerative tissue are overviewed. These have been inspiring the selection or synthesis of instructive cues to include into the 3D constructs. We further highlight the importance of a multiscale perception of the range of features that can be included on the biomimetic structures. Lastly, we focus on the current and developing tissue-engineering approaches for the preparation of such 3D constructs: top-down, bottom-up and integrative. Bottom-up and integrative approaches present a higher potential for the design of tissue engineering devices with multiscale features and higher biochemical control than top-down strategies, and are the main focus of this review. Copyright © 2015 Elsevier Inc. All rights reserved.

  16. Combining instruction prefetching with partial cache locking to improve WCET in real-time systems.

    Directory of Open Access Journals (Sweden)

    Fan Ni

    Full Text Available Caches play an important role in embedded systems to bridge the performance gap between fast processor and slow memory. And prefetching mechanisms are proposed to further improve the cache performance. While in real-time systems, the application of caches complicates the Worst-Case Execution Time (WCET analysis due to its unpredictable behavior. Modern embedded processors often equip locking mechanism to improve timing predictability of the instruction cache. However, locking the whole cache may degrade the cache performance and increase the WCET of the real-time application. In this paper, we proposed an instruction-prefetching combined partial cache locking mechanism, which combines an instruction prefetching mechanism (termed as BBIP with partial cache locking to improve the WCET estimates of real-time applications. BBIP is an instruction prefetching mechanism we have already proposed to improve the worst-case cache performance and in turn the worst-case execution time. The estimations on typical real-time applications show that the partial cache locking mechanism shows remarkable WCET improvement over static analysis and full cache locking.

  17. Combining instruction prefetching with partial cache locking to improve WCET in real-time systems.

    Science.gov (United States)

    Ni, Fan; Long, Xiang; Wan, Han; Gao, Xiaopeng

    2013-01-01

    Caches play an important role in embedded systems to bridge the performance gap between fast processor and slow memory. And prefetching mechanisms are proposed to further improve the cache performance. While in real-time systems, the application of caches complicates the Worst-Case Execution Time (WCET) analysis due to its unpredictable behavior. Modern embedded processors often equip locking mechanism to improve timing predictability of the instruction cache. However, locking the whole cache may degrade the cache performance and increase the WCET of the real-time application. In this paper, we proposed an instruction-prefetching combined partial cache locking mechanism, which combines an instruction prefetching mechanism (termed as BBIP) with partial cache locking to improve the WCET estimates of real-time applications. BBIP is an instruction prefetching mechanism we have already proposed to improve the worst-case cache performance and in turn the worst-case execution time. The estimations on typical real-time applications show that the partial cache locking mechanism shows remarkable WCET improvement over static analysis and full cache locking.

  18. A comparison of video modeling, text-based instruction, and no instruction for creating multiple baseline graphs in Microsoft Excel.

    Science.gov (United States)

    Tyner, Bryan C; Fienup, Daniel M

    2015-09-01

    Graphing is socially significant for behavior analysts; however, graphing can be difficult to learn. Video modeling (VM) may be a useful instructional method but lacks evidence for effective teaching of computer skills. A between-groups design compared the effects of VM, text-based instruction, and no instruction on graphing performance. Participants who used VM constructed graphs significantly faster and with fewer errors than those who used text-based instruction or no instruction. Implications for instruction are discussed. © Society for the Experimental Analysis of Behavior.

  19. Instructional Design as Resource for the Strengthening of the Regional Identity

    Directory of Open Access Journals (Sweden)

    Carol del Carmen Terán González

    2017-05-01

    Full Text Available The present investigation takes as a fundamental goal, the elaboration of an instructional digital design that contributes to the strengthening of the regional identity of the students. The study is based on the theoretical postulates of: UNESCO (2004, CBN (1997, Ausubel (1983, Vygotsky, Rodríguez (2001, Careaga (2001, Galvis (1992, Pastorini, (2000, Salazar (2008, Rosario (2005, Bernice McCarthy (1987, among others. The same one, adopted the type of descriptive investigation, with a field design placed in the modality of viable project. The population is constituted by 12 teachers, and 40 students of the sixth degree. For the diagnostic phase a questionnaire will be applied with 14 items for teachers and students, the validation will be of content across the experts' judgment. In conclusion, there exists weakness for the constitutive elements of the historical memory as part of the regional identity.

  20. Masters Thesis- Criticality Alarm System Design Guide with Accompanying Alarm System Development for the Radioisotope Production Laboratory in Richland, Washington

    Energy Technology Data Exchange (ETDEWEB)

    Greenfield, Bryce A. [Univ. of New Mexico, Albuquerque, NM (United States)

    2009-12-01

    A detailed instructional manual was created to guide criticality safety engineers through the process of designing a criticality alarm system (CAS) for Department of Energy (DOE) hazard class 1 and 2 facilities. Regulatory and technical requirements were both addressed. A list of design tasks and technical subtasks are thoroughly analyzed to provide concise direction for how to complete the analysis. An example of the application of the design methodology, the Criticality Alarm System developed for the Radioisotope Production Laboratory (RPL) of Richland, Washington is also included. The analysis for RPL utilizes the Monte Carlo code MCNP5 for establishing detector coverage in the facility. Significant improvements to the existing CAS were made that increase the reliability, transparency, and coverage of the system.

  1. Designing System Reforms: Using a Systems Approach to Translate Incident Analyses into Prevention Strategies

    Science.gov (United States)

    Goode, Natassia; Read, Gemma J. M.; van Mulken, Michelle R. H.; Clacy, Amanda; Salmon, Paul M.

    2016-01-01

    Advocates of systems thinking approaches argue that accident prevention strategies should focus on reforming the system rather than on fixing the “broken components.” However, little guidance exists on how organizations can translate incident data into prevention strategies that address the systemic causes of accidents. This article describes and evaluates a series of systems thinking prevention strategies that were designed in response to the analysis of multiple incidents. The study was undertaken in the led outdoor activity (LOA) sector in Australia, which delivers supervised or instructed outdoor activities such as canyoning, sea kayaking, rock climbing and camping. The design process involved workshops with practitioners, and focussed on incident data analyzed using Rasmussen's AcciMap technique. A series of reflection points based on the systemic causes of accidents was used to guide the design process, and the AcciMap technique was used to represent the prevention strategies and the relationships between them, leading to the creation of PreventiMaps. An evaluation of the PreventiMaps revealed that all of them incorporated the core principles of the systems thinking approach and many proposed prevention strategies for improving vertical integration across the LOA system. However, the majority failed to address the migration of work practices and the erosion of risk controls. Overall, the findings suggest that the design process was partially successful in helping practitioners to translate incident data into prevention strategies that addressed the systemic causes of accidents; refinement of the design process is required to focus practitioners more on designing monitoring and feedback mechanisms to support decisions at the higher levels of the system. PMID:28066296

  2. A Model of Research Paper Writing Instructional Materials for Academic Writing Course: "Needs & Documents Analysis and Model Design"

    Science.gov (United States)

    Ghufron, M. Ali; Saleh, Mursid; Warsono; Sofwan, Ahmad

    2016-01-01

    This study aimed at designing a model of instructional materials for Academic Writing Course focusing on research paper writing. The model was designed based on the Curriculum at the English Education Study Program, Faculty of Language and Art Education of IKIP PGRI Bojonegoro, East Java, Indonesia. This model was developed in order to improve…

  3. The Identification, Implementation, and Evaluation of Critical User Interface Design Features of Computer-Assisted Instruction Programs in Mathematics for Students with Learning Disabilities

    Science.gov (United States)

    Seo, You-Jin; Woo, Honguk

    2010-01-01

    Critical user interface design features of computer-assisted instruction programs in mathematics for students with learning disabilities and corresponding implementation guidelines were identified in this study. Based on the identified features and guidelines, a multimedia computer-assisted instruction program, "Math Explorer", which delivers…

  4. Theory Interpretation of Control System and Design Practice

    International Nuclear Information System (INIS)

    Jung, Heon Sul

    2003-11-01

    This book tells of theory interpretation of control system and design practice using automatic balancing weighing machine , including what control is, basic use of CEM Tool such as summary, work environment of CEM Tool, Symbol of CEM Tool, instruction of CEM Tool, drawing graph, and practice of making of CEM Tool, basic use of SIM Tool, driving test of sensor measurement motor such as LED, Pulse pick-up, answer test of RC circuit, structure of balancing weighing machine and wheel mathematical model, analysis of time response and frequency response of balancing weighing machine, and mathematical model and material property of balancing weighing machine.

  5. Evaluating the Instructional Architecture of Web-Based Learning Tools (WBLTs): Direct Instruction vs. Constructivism Revisited

    Science.gov (United States)

    Kay, Robin

    2013-01-01

    Web-based learning tools (WBLTs), also known as learning objects, have been evaluated with a wide range of metrics, but rarely with respect to pedagogical design. The current study evaluated the impact of instructional architecture (direct instruction vs. constructive-based) on middle (n = 333)

  6. Design and implementation of five-axis transformation function in CNC system

    Directory of Open Access Journals (Sweden)

    Wang Feng

    2014-04-01

    Full Text Available To implement five-axis functions in CNC system, based on domestic system Lan Tian series, an improved design method for the system software structure is proposed in this paper. The numerical control kernel of CNC system is divided into the task layer and the motion layer. A five-axis transformation unit is integrated into the motion layer. After classifying five-axis machines into different types and analyzing their geometry information, the five-axis kinematic library is designed according to the abstract factory pattern. Furthermore, by taking CA spindle-tilting machine as an example, the forward and the inverse kinematic transformations are deduced. Based on the new software architecture and the five-axis kinematic library, algorithms of RTCP (rotation tool center point control and 3D radius compensation for end-milling are designed and realized. The milling results show that, with five-axis functions based on such software structure, the instructions with respect to the cutter’s position and orientation can be directly carried out in the CNC system.

  7. The Implementation and Evaluation of an Instructional Design Based on the Interdisciplinary Approach: Conscious Consumer Education

    Science.gov (United States)

    Karakus, Memet; Uyar, Melis Yesilpinar

    2018-01-01

    The aim of this study was to implement and evaluate the instructional design prepared as consumer-oriented and based upon interdisciplinary curriculum. In this study, case study approach, which is one of the qualitative research patterns, was employed. Observations, interviews and document analysis were used to collect data. For analyzing the…

  8. Enabling People with Developmental Disabilities to Actively Follow Simple Instructions and Perform Designated Occupational Activities According to Simple Instructions with Battery-Free Wireless Mice by Controlling Environmental Stimulation

    Science.gov (United States)

    Shih, Ching-Hsiang; Chang, Man-Ling

    2012-01-01

    This study extended Battery-free wireless mouse functionality to assess whether two people with developmental disabilities would be able to actively perform designated simple occupational activities according to simple instructions by controlling their favorite environmental stimulation using Battery-free wireless mice with a newly developed…

  9. Emergency lighting system for compliance with the IS-30 and further than the foundations of design events

    International Nuclear Information System (INIS)

    Tejeda Sanchez, C.

    2014-01-01

    Autonomy and vulnerability to fire requirements of the emergency lighting systems, established in CSN instruction IS-30, and in commitments to deal with the consequences of events more beyond the bases of design, the design of a new lighting system required of emergency in the Almaraz Nuclear power plant. The design process consists of three phases: study of needs, definition of detailed design and requirements. During these phases is defined distribution and models luminaire lighting studies and specifications. Through the adaptation of the system to the needs of each area of the plant is It achieves compliance with the objectives defined by the CSN. (Author)

  10. Effects of a Weight Training Personalized System of Instruction Course on Fitness Levels and Knowledge

    Science.gov (United States)

    Pritchard, Tony; Penix, Kellie; Colquitt, Gavin; McCollum, Starla

    2012-01-01

    Effective instruction in a university physical activity program is essential if the program desires to meet the National Association for Sport and Physical Education (NASPE, 1998) guidelines for an appropriate college/university physical activity instructional program. To meet these guidelines, an instructor can use the Personalized System of…

  11. There Is More Variation "within" than "across" Domains: An Interview with Paul A. Kirschner about Applying Cognitive Psychology-Based Instructional Design Principles in Mathematics Teaching and Learning

    Science.gov (United States)

    Kirschner, Paul A.; Verschaffel, Lieven; Star, Jon; Van Dooren, Wim

    2017-01-01

    In this interview we asked Paul A. Kirschner about his comments and reflections regarding the idea to apply cognitive psychology-based instructional design principles to mathematics education and some related issues. With a main focus on cognitive psychology, educational psychology, educational technology and instructional design, this…

  12. Rethinking Instructional Technology to Improve Pedagogy for Digital Literacy: A Design Case in a Graduate Early Childhood Education Course

    Science.gov (United States)

    Langub, Lee Woodham; Lokey-Vega, Anissa

    2017-01-01

    Digital literacy is an important aspect to consider within teacher education as a way to address twenty-first century learner needs, particularly in early childhood contexts where developmental concerns should be paramount in making instructional design decisions. This article is a design case of a graduate level early childhood education…

  13. Elementary Science Teachers' Integration of Engineering Design into Science Instruction: Results from a Randomised Controlled Trial

    Science.gov (United States)

    Maeng, Jennifer L.; Whitworth, Brooke A.; Gonczi, Amanda L.; Navy, Shannon L.; Wheeler, Lindsay B.

    2017-01-01

    This randomised controlled trial used a mixed-methods approach to investigate the frequency and how elementary teachers integrated engineering design (ED) principles into their science instruction following professional development (PD). The ED components of the PD were aligned with Cunningham and Carlsen's [(2014). "Teaching engineering…

  14. A Comparison of Video Modeling, Text-Based Instruction, and No Instruction for Creating Multiple Baseline Graphs in Microsoft Excel

    Science.gov (United States)

    Tyner, Bryan C.; Fienup, Daniel M.

    2015-01-01

    Graphing is socially significant for behavior analysts; however, graphing can be difficult to learn. Video modeling (VM) may be a useful instructional method but lacks evidence for effective teaching of computer skills. A between-groups design compared the effects of VM, text-based instruction, and no instruction on graphing performance.…

  15. Design and Implementation of English for Academic Purpose Online Learning System Based on Browser/Server Framework

    Directory of Open Access Journals (Sweden)

    Yan Gong

    2018-03-01

    Full Text Available Today, with the rapid development of the information age, the education reform tends to be internationalized. The tertiary-level EFL education in colleges and universities has also changed its original model with focuses on cultivating gen-eral-purpose linguistic skills to one on students' English for Academic Purpose (EAP. EAP English instruction has been vigorously popularized in research-based universities. To achieve the informationized and standardized management for EAP English instruction work in the universities, in this paper, we design and develop a EAP English online learning system with B / S as the system develop-ment framework by which the system's overall functions are designed. MySQL is chosen as a database development tool used to implement the main object mod-ule, while JSP technology is used to support the cross-platform mechanism in order to access to diversified data sources. It is proved by the test on system op-eration that this system features operability, easy to use and maintain, and enables to meet the needs of university students for EAP English learning and teaching management, improves the students’ EAP English learning model and efficiency.

  16. Acquiring Science and Social Studies Knowledge in Kindergarten through Fourth Grade: Conceptualization, Design, Implementation, and Efficacy Testing of Content-Area Literacy Instruction (CALI)

    Science.gov (United States)

    Connor, Carol McDonald; Dombek, Jennifer; Crowe, Elizabeth C.; Spencer, Mercedes; Tighe, Elizabeth L.; Coffinger, Sean; Zargar, Elham; Wood, Taffeta; Petscher, Yaacov

    2017-01-01

    With national focus on reading and math achievement, science and social studies have received less instructional time. Yet, accumulating evidence suggests that content knowledge is an important predictor of proficient reading. Starting with a design study, we developed content-area literacy instruction (CALI) as an individualized (or personalized)…

  17. Using Instructional Design, Analyze, Design, Develop, Implement, and Evaluate, to Develop e-Learning Modules to Disseminate Supported Employment for Community Behavioral Health Treatment Programs in New York State.

    Science.gov (United States)

    Patel, Sapana R; Margolies, Paul J; Covell, Nancy H; Lipscomb, Cristine; Dixon, Lisa B

    2018-01-01

    Implementation science lacks a systematic approach to the development of learning strategies for online training in evidence-based practices (EBPs) that takes the context of real-world practice into account. The field of instructional design offers ecologically valid and systematic processes to develop learning strategies for workforce development and performance support. This report describes the application of an instructional design framework-Analyze, Design, Develop, Implement, and Evaluate (ADDIE) model-in the development and evaluation of e-learning modules as one strategy among a multifaceted approach to the implementation of individual placement and support (IPS), a model of supported employment for community behavioral health treatment programs, in New York State. We applied quantitative and qualitative methods to develop and evaluate three IPS e-learning modules. Throughout the ADDIE process, we conducted formative and summative evaluations and identified determinants of implementation using the Consolidated Framework for Implementation Research (CFIR). Formative evaluations consisted of qualitative feedback received from recipients and providers during early pilot work. The summative evaluation consisted of levels 1 and 2 (reaction to the training, self-reported knowledge, and practice change) quantitative and qualitative data and was guided by the Kirkpatrick model for training evaluation. Formative evaluation with key stakeholders identified a range of learning needs that informed the development of a pilot training program in IPS. Feedback on this pilot training program informed the design document of three e-learning modules on IPS: Introduction to IPS, IPS Job development, and Using the IPS Employment Resource Book . Each module was developed iteratively and provided an assessment of learning needs that informed successive modules. All modules were disseminated and evaluated through a learning management system. Summative evaluation revealed that

  18. Integrating Virtual Reality (VR) into traditional instructional design ...

    African Journals Online (AJOL)

    PROF. OLIVER OSUAGWA

    2015-12-01

    Dec 1, 2015 ... this technology and presented how to integrat VR with traditional instructional ... training has forced organizations to adopt new .... skills in a safe, controlled environment ... phone charger battery pack [B] connected to.

  19. Visible Wavelength Division Multiplex System for use as a Instructional Lab System for Higher Education

    OpenAIRE

    Fischer, Ulrich H. P.; Schmidt, Michael; Volmer, Tino; Weigl, Bjoern; Just, Jens-Uwe

    2007-01-01

    The demand for high-speed digital communication such as data, video, and the broadband Internet increases, the required throughput of the modules in communications systems will also increase. In this paper we present an instruction system, which works on the basis of a wavelength division multiplex (WDM) system in the visible spectrum. It is specialised for the academic training at universities to demonstrate the principles of the WDM techniques. It works platform independent in combination w...

  20. Design of virtual SCADA simulation system for pressurized water reactor

    International Nuclear Information System (INIS)

    Wijaksono, Umar; Abdullah, Ade Gafar; Hakim, Dadang Lukman

    2016-01-01

    The Virtual SCADA system is a software-based Human-Machine Interface that can visualize the process of a plant. This paper described the results of the virtual SCADA system design that aims to recognize the principle of the Nuclear Power Plant type Pressurized Water Reactor. This simulation uses technical data of the Nuclear Power Plant Unit Olkiluoto 3 in Finland. This device was developed using Wonderware Intouch, which is equipped with manual books for each component, animation links, alarm systems, real time and historical trending, and security system. The results showed that in general this device can demonstrate clearly the principles of energy flow and energy conversion processes in Pressurized Water Reactors. This virtual SCADA simulation system can be used as instructional media to recognize the principle of Pressurized Water Reactor

  1. Design of virtual SCADA simulation system for pressurized water reactor

    Energy Technology Data Exchange (ETDEWEB)

    Wijaksono, Umar, E-mail: umar.wijaksono@student.upi.edu; Abdullah, Ade Gafar; Hakim, Dadang Lukman [Electrical Power System Research Group, Department of Electrical Engineering Education, Jl. Dr. Setiabudi No. 207 Bandung, Indonesia 40154 (Indonesia)

    2016-02-08

    The Virtual SCADA system is a software-based Human-Machine Interface that can visualize the process of a plant. This paper described the results of the virtual SCADA system design that aims to recognize the principle of the Nuclear Power Plant type Pressurized Water Reactor. This simulation uses technical data of the Nuclear Power Plant Unit Olkiluoto 3 in Finland. This device was developed using Wonderware Intouch, which is equipped with manual books for each component, animation links, alarm systems, real time and historical trending, and security system. The results showed that in general this device can demonstrate clearly the principles of energy flow and energy conversion processes in Pressurized Water Reactors. This virtual SCADA simulation system can be used as instructional media to recognize the principle of Pressurized Water Reactor.

  2. Microcomputer Applications for Library Instruction: Automation of Test and Assignment Scoring, and Student Record Keeping.

    Science.gov (United States)

    Sugranes, Maria R.; Snider, Larry C.

    1985-01-01

    Describes the development of an automated library instruction records management system using microcomputer technology. Development described includes assessment of need, exploration of options, system design, and operational development. System products are identified and operational results are reported based on actual system performance.…

  3. Designing Home-Based Telemedicine Systems for the Geriatric Population: An Empirical Study.

    Science.gov (United States)

    Narasimha, Shraddhaa; Agnisarman, Sruthy; Chalil Madathil, Kapil; Gramopadhye, Anand; McElligott, James T

    2018-02-01

    Background and Introduction: Telemedicine, the process of providing healthcare remotely using communication devices, has the potential to be useful for the geriatric population when specifically designed for this age group. This study explored the design of four video telemedicine systems currently available and outlined issues with these systems that impact usability among the geriatric population. Based on the results, design suggestions were developed to improve telemedicine systems for this population. Using a between-subjects experimental design, the study considered four telemedicine systems used in Medical University of South Carolina. The study was conducted at a local retirement home. The participant pool consisted of 40 adults, 60 years or older. The dependent measures used were the mean times for telemedicine session initiation and video session, mean number of errors, post-test satisfaction ratings, the NASA-Task Load Index (NASA-TLX) workload measures, and the IBM-Computer Systems Usability Questionnaire measures. Statistical significance was found among the telemedicine systems' initiation times. The analysis of the qualitative data revealed several issues, including lengthy e-mail content, icon placement, and chat box design, which affect the usability of these systems for the geriatric population. Human factor-based design modifications, including short, precise e-mail content, appropriately placed icons, and the inclusion of instructions, are recommended to address the issues found in the qualitative study.

  4. A Comprehensive Evaluation Rubric for Assessing Instructional Apps

    Science.gov (United States)

    Lee, Cheng-Yuan; Cherner, Todd Sloan

    2015-01-01

    There is a pressing need for an evaluation rubric that examines all aspects of educational apps designed for instructional purposes. In past decades, many rubrics have been developed for evaluating educational computer-based programs; however, rubrics designed for evaluating the instructional implications of educational apps are scarce. When an…

  5. Faculty professional development in emergent pedagogies for instructional innovation in dental education.

    Science.gov (United States)

    Zheng, M; Bender, D; Nadershahi, N

    2017-05-01

    Innovative pedagogies have significantly impacted health professions' education, dental education included. In this context, faculty, defined in this study as instructor in higher education, has been increasingly required to hone their instructional skills. The purpose of this exploratory study was to share the design, implementation and preliminary outcomes of two programmes to enhance dental faculty's instructional skills, the Teaching and Learning Seminar Series and the Course Director Orientation. Data sources included faculty and student surveys developed and administered by the researchers; data extracted from the learning management system; reports from the learning analytics tool; and classroom observations. Participants' satisfaction, self-reported learning, instructional behavioural change, and impact on student learning behaviours and institutional practice were assessed borrowing from Kirkpatrick's 4-level model of evaluation of professional development effectiveness. Initial findings showed that faculty in both programmes reported positive learning experiences. Participants reported that the programmes motivated them to improve instructional practice and improved their knowledge of instructional innovation. Some faculty reported implementation of new instructional strategies and tools, which helped create an active and interactive learning environment that was welcomed by their students. The study contributes to literature and best practice in health sciences faculty development in pedagogy and may guide other dental schools in designing professional development programmes. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  6. Evaluation of a pictograph enhancement system for patient instruction: a recall study.

    Science.gov (United States)

    Zeng-Treitler, Qing; Perri, Seneca; Nakamura, Carlos; Kuang, Jinqiu; Hill, Brent; Bui, Duy Duc An; Stoddard, Gregory J; Bray, Bruce E

    2014-01-01

    We developed a novel computer application called Glyph that automatically converts text to sets of illustrations using natural language processing and computer graphics techniques to provide high quality pictographs for health communication. In this study, we evaluated the ability of the Glyph system to illustrate a set of actual patient instructions, and tested patient recall of the original and Glyph illustrated instructions. We used Glyph to illustrate 49 patient instructions representing 10 different discharge templates from the University of Utah Cardiology Service. 84 participants were recruited through convenience sampling. To test the recall of illustrated versus non-illustrated instructions, participants were asked to review and then recall a set questionnaires that contained five pictograph-enhanced and five non-pictograph-enhanced items. The mean score without pictographs was 0.47 (SD 0.23), or 47% recall. With pictographs, this mean score increased to 0.52 (SD 0.22), or 52% recall. In a multivariable mixed effects linear regression model, this 0.05 mean increase was statistically significant (95% CI 0.03 to 0.06, pillustration is a novel approach to improve the comprehension and recall of discharge instructions. Our results showed a statistically significant in recall with automated illustrations. Subjects with no-colleague education and younger subjects appeared to benefit more from the illustrations than others. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  7. Instructional Cost Analysis: History and Present Inadequacies.

    Science.gov (United States)

    Humphrey, David A.

    The cost analysis of instruction is conducted according to principles of teaching and learning that have often become historically dated. Using today's costing systems prevents determination of whether cost effectiveness actually exists. The patterns of instruction in higher education and the systems employed for instructional cost analysis are…

  8. Computer Managed Instruction - Is It A System For Your School?

    Science.gov (United States)

    Bozeman, William C.

    1979-01-01

    Presented is a primer providing the distinction between computer-assisted instruction and computer-managed instruction (CMI), as well as application notes on how CMI contributes to cost-effective achievement of individualized instruction and enhanced student learning. (Author/BB)

  9. CNC Turning Technician. A Competency-Based Instructional System.

    Science.gov (United States)

    Sloan, Kelly; Hilley, Robert

    This competency-based curriculum guide for instructing students in using computer numerically controlled (CNC) turning machines is one of a series of instructional guides for the machinist field developed in Oklahoma. Although developed jointly with Baxter Technologies Corporation and oriented toward the Baxter Vo-Tec 2000 Future Builder CNC…

  10. Designing evidence-based medicine training to optimize the transfer of skills from the classroom to clinical practice: applying the four component instructional design model.

    Science.gov (United States)

    Maggio, Lauren A; Cate, Olle Ten; Irby, David M; O'Brien, Bridget C

    2015-11-01

    Evidence-based medicine (EBM) skills, although taught in medical schools around the world, are not optimally practiced in clinical environments because of multiple barriers, including learners' difficulty transferring EBM skills learned in the classroom to clinical practice. This lack of skill transfer may be partially due to the design of EBM training. To facilitate the transfer of EBM skills from the classroom to clinical practice, the authors explore one instructional approach, called the Four Component Instructional Design (4C/ID) model, to guide the design of EBM training. On the basis of current cognitive psychology, including cognitive load theory, the premise of the 4C/ID model is that complex skills training, such as EBM training, should include four components: learning tasks, supportive information, procedural information, and part-task practice. The combination of these four components can inform the creation of complex skills training that is designed to avoid overloading learners' cognitive abilities; to facilitate the integration of the knowledge, skills, and attitudes needed to execute a complex task; and to increase the transfer of knowledge to new situations. The authors begin by introducing the 4C/ID model and describing the benefits of its four components to guide the design of EBM training. They include illustrative examples of educational practices that are consistent with each component and that can be applied to teaching EBM. They conclude by suggesting that medical educators consider adopting the 4C/ID model to design, modify, and/or implement EBM training in classroom and clinical settings.

  11. Students' Appraisal of the Quality of Instruction in Clothing and ...

    African Journals Online (AJOL)

    FIRST LADY

    value of the quality of instruction in the teaching of Clothing and Textiles in ... Nigerian educational system althoughArubayi's (2003) research findings revealed that ... assessments, ratings or evaluation of academic staff in Nigeria, have either .... The design of this research work was ex-post facto and descriptive in nature.

  12. Using Technology and Assessment to Personalize Instruction: Preventing Reading Problems.

    Science.gov (United States)

    Connor, Carol McDonald

    2017-09-15

    Children who fail to learn to read proficiently are at serious risk of referral to special education, grade retention, dropping out of high school, and entering the juvenile justice system. Accumulating research suggests that instruction regimes that rely on assessment to inform instruction are effective in improving the implementation of personalized instruction and, in turn, student learning. However, teachers find it difficult to interpret assessment results in a way that optimizes learning opportunities for all of the students in their classrooms. This article focuses on the use of language, decoding, and comprehension assessments to develop personalized plans of literacy instruction for students from kindergarten through third grade, and A2i technology designed to support teachers' use of assessment to guide instruction. Results of seven randomized controlled trials demonstrate that personalized literacy instruction is more effective than traditional instruction, and that sustained implementation of personalized literacy instruction first through third grade may prevent the development of serious reading problems. We found effect sizes from .2 to .4 per school year, which translates into about a 2-month advantage. These effects accumulated from first through third grade with a large effect size (d = .7) equivalent to a full grade-equivalent advantage on standardize tests of literacy. These results demonstrate the efficacy of technology-supported personalized data-driven literacy instruction to prevent serious reading difficulties. Implications for translational prevention research in education and healthcare are discussed.

  13. Effect of Personalized System of Instruction on Health-Related Fitness Knowledge and Class Time Physical Activity

    Science.gov (United States)

    Prewitt, Steven L.; Hannon, James C.; Colquitt, Gavin; Brusseau, Timothy A.; Newton, Maria; Shaw, Janet

    2015-01-01

    In previous studies, researchers have identified a general low level of health-related fitness (HRF) knowledge among secondary students that can effect levels of physical activity (PA). An instructional strategy that may increase HRF knowledge without decreasing PA is the personalized system of instruction (PSI). Two classes from a private urban…

  14. Training Higher Education Teachers for Instructional Design of Competency-based Education: Product-oriented versus Process-oriented Worked Examples

    NARCIS (Netherlands)

    Hoogveld, Bert; Paas, Fred; Jochems, Wim

    2007-01-01

    Teachers involved in the development of competency-based higher education (CBE) are expected to fulfil a new role of instructional designer. As a consequence, they are confronted with the problem to translate abstract new curriculum principles into concrete learning tasks. Recent studies have shown

  15. Designing Computer-Supported Complex Systems Curricula for the Next Generation Science Standards in High School Science Classrooms

    Directory of Open Access Journals (Sweden)

    Susan A. Yoon

    2016-12-01

    Full Text Available We present a curriculum and instruction framework for computer-supported teaching and learning about complex systems in high school science classrooms. This work responds to a need in K-12 science education research and practice for the articulation of design features for classroom instruction that can address the Next Generation Science Standards (NGSS recently launched in the USA. We outline the features of the framework, including curricular relevance, cognitively rich pedagogies, computational tools for teaching and learning, and the development of content expertise, and provide examples of how the framework is translated into practice. We follow this up with evidence from a preliminary study conducted with 10 teachers and 361 students, aimed at understanding the extent to which students learned from the activities. Results demonstrated gains in students’ complex systems understanding and biology content knowledge. In interviews, students identified influences of various aspects of the curriculum and instruction framework on their learning.

  16. An Instructional Design Model for Developing a Computer Curriculum To Increase Employee Productivity in a Pharmaceutical Company.

    Science.gov (United States)

    Stumpf, Mark R.

    This report presents an instructional design model that was developed for use by the End-Users Computing department of a large pharmaceutical company in developing effective--but not lengthy--microcomputer training seminars to train office workers and executives in the proper use of computers and thus increase their productivity. The 14 steps of…

  17. Tech Select Decision Aide: A Mobile Application to Facilitate Just-in-Time Decision Support for Instructional Designers

    Science.gov (United States)

    Dabbagh, Nada; Fake, Helen

    2017-01-01

    With the ubiquitous use of mobile technologies and the increasing demand for just-in-time training, there is a need to prepare and support instructional designers and educators to meet the pedagogical and technological development requirements of their target audience in the most effective and efficient way. This paper reviews the iterative…

  18. Receiver-exciter controller design

    Science.gov (United States)

    Jansma, P. A.

    1982-01-01

    A description of the general design of both the block 3 and block 4 receiver-exciter controllers for the Deep Space Network (DSN) Mark IV-A System is presented along with the design approach. The controllers are designed to enable the receiver-exciter subsystem (RCV) to be configured, calibrated, initialized and operated from a central location via high level instructions. The RECs are designed to be operated under the control of the DMC subsystem. The instructions are in the form of standard subsystem blocks (SSBs) received via the local area network (LAN). The centralized control provided by RECs and other DSCC controllers in Mark IV-A is intended to reduce DSN operations costs from the Mark III era.

  19. Instructable autonomous agents. Ph.D. Thesis

    Science.gov (United States)

    Huffman, Scott Bradley

    1994-01-01

    In contrast to current intelligent systems, which must be laboriously programmed for each task they are meant to perform, instructable agents can be taught new tasks and associated knowledge. This thesis presents a general theory of learning from tutorial instruction and its use to produce an instructable agent. Tutorial instruction is a particularly powerful form of instruction, because it allows the instructor to communicate whatever kind of knowledge a student needs at whatever point it is needed. To exploit this broad flexibility, however, a tutorable agent must support a full range of interaction with its instructor to learn a full range of knowledge. Thus, unlike most machine learning tasks, which target deep learning of a single kind of knowledge from a single kind of input, tutorability requires a breadth of learning from a broad range of instructional interactions. The theory of learning from tutorial instruction presented here has two parts. First, a computational model of an intelligent agent, the problem space computational model, indicates the types of knowledge that determine an agent's performance, and thus, that should be acquirable via instruction. Second, a learning technique, called situated explanation specifies how the agent learns general knowledge from instruction. The theory is embodied by an implemented agent, Instructo-Soar, built within the Soar architecture. Instructo-Soar is able to learn hierarchies of completely new tasks, to extend task knowledge to apply in new situations, and in fact to acquire every type of knowledge it uses during task performance - control knowledge, knowledge of operators' effects, state inferences, etc. - from interactive natural language instructions. This variety of learning occurs by applying the situated explanation technique to a variety of instructional interactions involving a variety of types of instructions (commands, statements, conditionals, etc.). By taking seriously the requirements of flexible

  20. Towards a Person-Centered Model of Instruction: Can An Emphasis on the Personal Enhance Instruction in Cyberspace?

    Science.gov (United States)

    Miller, Christopher; Mazur, Joan M.

    2001-01-01

    A person-centered instructional design model was developed for virtual, Web-based environments, based on the work of Carl Rogers. This model attempts to address several issues raised in the literature. A person-centered instructional model is described and contrasted with instructionalist and constructivist approaches. Theoretical and practical…

  1. Instructional skills evaluation in nuclear industry training

    International Nuclear Information System (INIS)

    Mazour, T.J.; Ball, F.M.

    1985-11-01

    This report provides information to nuclear power plant training managers and their staffs concerning the job performance requirements of instructional personnel to implement prformance-based training programs (also referred to as the Systems Approach Training). The information presented in this report is a compilation of information and lessons learned in the nuclear power industry and in other industries using performance-based training programs. The job performance requirements in this report are presented as instructional skills objectives. The process used to develop the instructional skills objectives is described. Each objective includes an Instructional Skills Statement describing the behavior that is expected and an Instructional Skills Standard describing the skills/knowledge that the individual should possess in order to have achieved mastery. The instructional skills objectives are organized according to the essential elements of the Systems Approach to Training and are cross-referenced to three categories of instructional personnel: developers of instruction, instructors, and instructional managers/supervisors. Use of the instructional skills objectives is demonstrated for reviewing instructional staff training and qualification programs, developing criterion-tests, and reviewing the performance and work products of individual staff members. 22 refs

  2. Mathematical design of a novel input/instruction device using a moving acoustic emitter

    Science.gov (United States)

    Wang, Xianchao; Guo, Yukun; Li, Jingzhi; Liu, Hongyu

    2017-10-01

    This paper is concerned with the mathematical design of a novel input/instruction device using a moving emitter. The emitter acts as a point source and can be installed on a digital pen or worn on the finger of the human being who desires to interact/communicate with the computer. The input/instruction can be recognized by identifying the moving trajectory of the emitter performed by the human being from the collected wave field data. The identification process is modelled as an inverse source problem where one intends to identify the trajectory of a moving point source. There are several salient features of our study which distinguish our result from the existing ones in the literature. First, the point source is moving in an inhomogeneous background medium, which models the human body. Second, the dynamical wave field data are collected in a limited aperture. Third, the reconstruction method is independent of the background medium, and it is totally direct without any matrix inversion. Hence, it is efficient and robust with respect to the measurement noise. Both theoretical justifications and computational experiments are presented to verify our novel findings.

  3. Preparing Instructional Objectives: Agony or Ecstasy?

    Science.gov (United States)

    Roberts, Wesley K.

    This paper 1) discusses the problems encountered in preparing objectives for instructional programs; 2) describes an informal research project in which seven instructional designers working on the same project attempted to determine agreement on an objective; and 3) suggests how to prepare objectives so that difficulties can be minimized. One…

  4. Web-Based Instruction (WBI): An Introduction.

    Science.gov (United States)

    Khan, Badrul H.

    1998-01-01

    Advances in information technology, coupled with changes in society, are creating new paradigms for education. The Web, as a medium of learning and instruction, has the potential to support the creation of well-designed resources. A table of features and components associated with Web-based instruction learning environments is provided.…

  5. A Report on the Research and Development of Instructional Simulation.

    Science.gov (United States)

    West, Charles K.; And Others

    The purpose of this report is to communicate findings on current knowledge of simulation design, development, and evaluation. Research on this project was guided by questions posed by the Defense Systems Management College in Fort Belvoir, Virginia. These questions fall into three categories: the constituents of good instructional simulations, the…

  6. Improving the development of instructional software : Three building-block solutions to interrelate design and production

    NARCIS (Netherlands)

    Boot, E.W.; Merrienboer, J.J.G. van; Theunissen, N.C.M.

    2008-01-01

    Currently, there is a focus on authentic tasks as the driving force for learning in integrated e-learning systems. This sets new criteria for instructional software, which should become much more flexible and allow for domain modeling and pedagogical modeling. A theoretical analysis and a survey (n

  7. Instructional Support System--Occupational Education II. ISSOE Automotive Mechanics Content Validation.

    Science.gov (United States)

    Abramson, Theodore

    A study was conducted to validate the Instructional Support System-Occupational Education (ISSOE) automotive mechanics curriculum. The following four steps were undertaken: (1) review of the ISSOE materials in terms of their "validity" as task statements; (2) a comparison of the ISSOE tasks to the tasks included in the V-TECS Automotive…

  8. 電腦輔助教學與個別教學結合: 電腦輔助教學課堂應用初探 Computer-Assisted Instruction Under the Management of Individualized Instruction: A Classroom Management Approach of CAI

    Directory of Open Access Journals (Sweden)

    Sunny S. J. Lin

    1988-03-01

    Full Text Available 無First reviews the development of Computer. Assisted Instruction (CAI in Taiwan. This study describes the training of teachers from different levels of schools to design CAI coursewares, and the planning of CAI courseware bank possesses 2,000 supplemental coursewares. Some CAI's c1assroom application system should be carefully established to prevent the easy abuse of a CAI courseware as an instructional plan. The study also claims to steer CAI in our elemantary and secondary education could rely on the mastery learning as the instructional plan. In this case, CAI must limit its role as the formative test and remedial material only. In the higher education , the Keller's Personalized System of Instruction could be an effective c1assroom management system. Therefore, CAI will offer study guide and formative test only. Using these 2 instructional system may enhance student's achievement , and speed up the learning rate at the same time. Combining with individualized instruction and CAI will be one of the most workable approach in current c1assroom . The author sets up an experiment 10 varify their effectiveness and efficiency in the near future.

  9. Cultural dimensions of learning: Addressing the challenges of multicultural instruction

    Directory of Open Access Journals (Sweden)

    Patrick Parrish

    2010-05-01

    Full Text Available The growing multicultural nature of education and training environments makes it critical that instructors and instructional designers, especially those working in online learning environments, develop skills to deliver culturally sensitive and culturally adaptive instruction. This article explores research into cultural differences to identify those dimensions of culture that are most likely to impact instructional situations. It presents these in the cultural dimensions of learning framework (CDLF, which describes a set of eight cultural parameters regarding social relationships, epistemological beliefs, and temporal perceptions, and illustrates their spectrums of variability as they might be exhibited in instructional situations. The article also explores the literature on instructional design and culture for guidelines on addressing the cross-cultural challenges faced by instructional providers. It suggests that these challenges can be overcome through increased awareness, culturally sensitive communication, modified instructional design processes, and efforts to accommodate the most critical cultural differences. Finally, it describes the use of the CDLF questionnaire as a tool to illuminate the range of preferences existing among learners and to discover the potential range of strategies and tactics that might be useful for a given set of learners.

  10. A Closer Look at Split Visual Attention in System- and Self-Paced Instruction in Multimedia Learning

    Science.gov (United States)

    Schmidt-Weigand, Florian; Kohnert, Alfred; Glowalla, Ulrich

    2010-01-01

    Two experiments examined visual attention distribution in learning from text and pictures. Participants watched a 16-step multimedia instruction on the formation of lightning. In Experiment 1 (N=90) the instruction was system-paced (fast, medium, slow pace), while it was self-paced in Experiment 2 (N=31). In both experiments the text modality was…

  11. Asthma in the community: Designing instruction to help students explore scientific dilemmas that impact their lives

    Science.gov (United States)

    Tate, Erika Dawn

    School science instruction that connects to students' diverse home, cultural, or linguistic experiences can encourage lifelong participation in the scientific dilemmas that impact students' lives. This dissertation seeks effective ways to support high school students as they learn complex science topics and use their knowledge to transform their personal and community environments. Applying the knowledge integration perspective, I collaborated with education, science, and community partners to design a technology enhanced science module, Improving Your Community's Asthma Problem. This exemplar community science curriculum afforded students the opportunity to (a) investigate a local community health issue, (b) interact with relevant evidence related to physiology, clinical management, and environmental risks, and (c) construct an integrated understanding of the asthma problem in their community. To identify effective instructional scaffolds that engage students in the knowledge integration process and prepare them to participate in community science, I conducted 2 years of research that included 5 schools, 10 teachers, and over 500 students. This dissertation reports on four studies that analyzed student responses on pre-, post-, and embedded assessments. Researching across four design stages, the iterative design study investigated how to best embed the visualizations of the physiological processes breathing, asthma attack, and the allergic immune response in an inquiry activity and informed evidence-based revisions to the module. The evaluation study investigated the impact of this revised Asthma module across multiple classrooms and differences in students' prior knowledge. Combining evidence of student learning from the iterative and evaluation studies with classroom observations and teacher interviews, the longitudinal study explored the impact of teacher practices on student learning in years 1 and 2. In the final chapter, I studied how the Asthma module and

  12. Three Principles of Perception for Instructional Interface Design.

    Science.gov (United States)

    Lohr, Linda L.

    2000-01-01

    Discusses graphical user interfaces used for instructional purposes in educational environments, which promote learning goals, and in support environments, which promote performance goals. Explains three key principles of perception and gives guidelines for their use, including the figure/ground principle, the hierarchy principle, and the gestalt…

  13. Processing Instruction: A Review of Issues

    Science.gov (United States)

    Rasuki, Muhlisin

    2017-01-01

    This paper provides a critical review of Processing Instruction (PI). This type of instructional option was specifically designed to help second/foreign language (L2) learners grasp meaning manifested in the use of particular grammatical forms in a target language effectively through the provision of input. In this way, PI attempts to help…

  14. Using Instructional Design, Analyze, Design, Develop, Implement, and Evaluate, to Develop e-Learning Modules to Disseminate Supported Employment for Community Behavioral Health Treatment Programs in New York State

    Directory of Open Access Journals (Sweden)

    Sapana R. Patel

    2018-05-01

    management system. Summative evaluation revealed that learners rated the modules positively, and self-report of knowledge acquisition was high (mean range: 4.4–4.6 out of 5. About half of learners indicated that they would change their practice after watching the modules (range: 48–51%. All learners who completed the level 1 evaluation demonstrated 80% or better mastery of knowledge on the level 2 evaluation embedded in each module. The CFIR was used to identify implementation barriers and facilitators among the evaluation data which facilitated planning for subsequent implementation support activities in the IPS initiative.ConclusionInstructional design approaches such as ADDIE may offer implementation scientists and practitioners a flexible and systematic approach for the development of e-learning modules as a single component or one strategy in a multifaceted approach for training in EBPs.

  15. Sense of Accomplishment Is Modulated by a Proper Level of Instruction and Represented in the Brain Reward System.

    Science.gov (United States)

    Nakai, Tomoya; Nakatani, Hironori; Hosoda, Chihiro; Nonaka, Yulri; Okanoya, Kazuo

    2017-01-01

    Problem-solving can be facilitated with instructions or hints, which provide information about given problems. The proper amount of instruction that should be provided for learners is controversial. Research shows that tasks with intermediate difficulty induce the largest sense of accomplishment (SA), leading to an intrinsic motivation for learning. To investigate the effect of instructions, we prepared three instruction levels (No hint, Indirect hint, and Direct hint) for the same insight-problem types. We hypothesized that indirect instructions impose intermediate difficulty for each individual, thereby inducing the greatest SA per person. Based on previous neuroimaging studies that showed involvement of the bilateral caudate in learning and motivation, we expected SA to be processed in this reward system. We recruited twenty-one participants, and investigated neural activations during problem solving by functional magnetic resonance imaging (fMRI). We confirmed that the Indirect hint, which imposed intermediate difficulty, induced the largest SA among the three instruction types. Using fMRI, we showed that activations in the bilateral caudate and anterior cingulate cortex (ACC) were significantly modulated by SA. In the bilateral caudate, the indirect hint induced the largest activation, while the ACC seemed to reflect the difference between correct and incorrect trials. Importantly, such activation pattern was independent of notations (number or letter). Our results indicate that SA is represented in the reward system, and that the Indirect instruction effectively induces such sensation.

  16. The Design, Development and Evaluation of a Virtual Reality Based Learning Environment

    Science.gov (United States)

    Chen, Chwen Jen

    2006-01-01

    Many researchers and instructional designers increasingly recognise the benefits of utilising three dimensional virtual reality (VR) technology in instruction. In general, there are two types of VR system, the immersive system and the non-immersive system. This article focuses on the latter system that merely uses the conventional personal…

  17. Assessing the Student-Instructional Setting Interface Using an Eco-Behavioral Observation System.

    Science.gov (United States)

    Hendrickson, Jo M.

    1992-01-01

    An eco-behavioral observation system was developed for use with students with behavior disorders or emotional disturbances. Discussed are the ecosystem definition, the student-instructional setting interface, and the assessment procedure, including evaluation of the quality of academic responding, program evaluation, staff development, and…

  18. Human factors analysis and design methods for nuclear waste retrieval systems. Volume III. User's guide for the computerized event-tree analysis technique

    International Nuclear Information System (INIS)

    Casey, S.M.; Deretsky, Z.

    1980-08-01

    This document provides detailed instructions for using the Computerized Event-Tree Analysis Technique (CETAT), a program designed to assist a human factors analyst in predicting event probabilities in complex man-machine configurations found in waste retrieval systems. The instructions contained herein describe how to (a) identify the scope of a CETAT analysis, (b) develop operator performance data, (c) enter an event-tree structure, (d) modify a data base, and (e) analyze event paths and man-machine system configurations. Designed to serve as a tool for developing, organizing, and analyzing operator-initiated event probabilities, CETAT simplifies the tasks of the experienced systems analyst by organizing large amounts of data and performing cumbersome and time consuming arithmetic calculations. The principal uses of CETAT in the waste retrieval development project will be to develop models of system reliability and evaluate alternative equipment designs and operator tasks. As with any automated technique, however, the value of the output will be a function of the knowledge and skill of the analyst using the program

  19. Prescriptive Training Courseware: IS-Design Methodology

    Directory of Open Access Journals (Sweden)

    Elspeth McKay

    2018-03-01

    Full Text Available Information systems (IS research is found in many diverse communities. This paper explores the human-dimension of human-computer interaction (HCI to present IS-design practice in the light of courseware development. Assumptions are made that online courseware provides the perfect solution for maintaining a knowledgeable, well skilled workforce. However, empirical investigations into the effectiveness of information technology (IT-induced training solutions are scarce. Contemporary research concentrates on information communications technology (ICT training tools without considering their effectiveness. This paper offers a prescriptive IS-design methodology for managing the requirements for efficient and effective courseware development. To develop the methodology, we examined the main instructional design (ID factors that affect the design of IT-induced training programs. We also examined the tension between maintaining a well-skilled workforce and effective instructional systems design (ISD practice by probing the current ID models used by courseware developers since 1990. An empirical research project, which utilized this IS-design methodology investigated the effectiveness of using IT to train government employees in introductory ethics; this was a study that operationalized the interactive effect of cognitive preference and instructional format on training performance outcomes. The data was analysed using Rasch item response theory (IRT that models the discrimination of people’s performance relative to each other’s performance and the test-items’ difficulty relative to each test-item on the same logit scale. The findings revealed that IS training solutions developed using this IS-design methodology can be adapted to provide trainees with their preferred instructional mode and facilitate cost effective eTraining outcomes.

  20. A Comprehensive Evaluation Rubric for Assessing Instructional Apps

    Directory of Open Access Journals (Sweden)

    Cheng-Yuan Lee

    2015-01-01

    Full Text Available There is a pressing need for an evaluation rubric that examines all aspects of educational apps designed for instructional purposes. In past decades, many rubrics have been developed for evaluating educational computer-based programs; however, rubrics designed for evaluating the instructional implications of educational apps are scarce. When an Internet search for existing rubrics was conducted, only two such rubrics were found, and the evaluation criteria used in those rubrics was not clearly linked to previously conducted research nor were their evaluative dimensions clearly defined. These shortcomings result in reviewers being unable to use those rubrics to provide teachers with a precise analysis of an educational app’s instructional potential. In response, this paper presents a comprehensive rubric with 24-evaluative dimensions tailored specifically to analyze the educational potential of instructional apps.

  1. Investigating Peer Review as an Intentional Learning Strategy to Foster Collaborative Knowledge-Building in Students of Instructional Design

    Science.gov (United States)

    Brill, Jennifer M.; Hodges, Charles B.

    2011-01-01

    Peer review has been advocated for as an intentional strategy to support the knowledge and skill attainment of adult learners preparing for professional practice, including those students preparing for instructional design and technology practice. The purposes of this article are to discuss the practical application of peer review as an…

  2. Diseño instruccional: oficio, fase y proceso Desenho instruccional: ofício, fase e processo Instructional Design: Role, Phase and Process

    Directory of Open Access Journals (Sweden)

    Andrés Chiappe. Laverde

    2008-12-01

    ício.The article offers a conceptual look at instructional design as a term now being used frequently in processes to generate educational material and virtual learning environments. It begins with a review of the history and evolution of instructional design and ends with a theoretical proposal. The objective of the article is to construct a critical proposal in response to the current debate over instructional design. The proposal places special emphasis on differences compared to the models that have served historically as the principal reference on this subject. To accomplish this, the term instruction is examined in depth, so as to arrive at a comprehensive approach to the globality of instructional design. The importance of identifying both the profile and the particular role of an instructional designer is emphasized as a way to establish a frame of reference for defining the practice of instructional design, the relationships constructed by institutional designers, and the interdisciplinary knowledge particular to their role.

  3. Instructional Design Issues in a Distributed Collaborative Engineering Design (CED) Instructional Environment

    Science.gov (United States)

    Koszalka, Tiffany A.; Wu, Yiyan

    2010-01-01

    Changes in engineering practices have spawned changes in engineering education and prompted the use of distributed learning environments. A distributed collaborative engineering design (CED) course was designed to engage engineering students in learning about and solving engineering design problems. The CED incorporated an advanced interactive…

  4. Construct Validation--Community College Instructional Development Inventory

    Science.gov (United States)

    Xiong, Soua; Delgado, Nexi; Wood, J. Luke; Harris, Frank, III

    2017-01-01

    This white paper describes the construct validation of the Community College Instructional Development Inventory (CC-IDI). The CC-IDI is an institutional assessment tool designed to inform professional development programming for instructional faculty. The instrument was developed to serve as a standardized assessment tool to determine the…

  5. Instruction of the CSN on the requirements of the system of management of the nuclear power plants; Instruccion del CSN sobre los requisitos del sistema de gestion de las instalaciones nucleares

    Energy Technology Data Exchange (ETDEWEB)

    Cid, R.; Santo, A. de; Gil Montes, B.; Toca, A.

    2008-07-01

    The Western European Nations Regulatory Authorities (WENRA) performed a nuclear safety requirements harmonization task, as a result of this work and its implementation, the Spanish Nuclear Safety Counsel (CSN) has the commitment to issue its own Regulation Safety Instructions) to identify the WENRA to level nuclear safety requirements, and to incorporate it in the Spanish regulatory pyramid. However, the Spain nuclear installations meet these requirements through the original criteria to fulfill the regulation of the country that supply the NSSS design, these requirements are not incorporated in our regulation. One of the issues, identified by WENRA, is the implementation of the management system requirements in accord with the IAEA GS-R-3 The Management System for Facilities and Activities. As these regards, the CSN has developed a Safety Instruction, basically endorsing the IAEA GS-R-3. The Safety Instruction is actually in a phase of external comments and should be issued by june 2008. This paper describes the bases for the Safety Instruction, summarises the requirements that would meet the management system for nuclear installations and the activities to perform for its implementations. (Author)

  6. Professionality of Junior High School (SMP) Science Teacher in Preparing Instructional Design of Earth and Space Sciences (IPBA)

    Science.gov (United States)

    Marlina, L.; Liliasari; Tjasyono, B.; Hendayana, S.

    2017-02-01

    The teacher is one important factor in the provision of education in schools. Therefore, improving the quality of education means we need to enhance the quality and the professionalism of teachers. We offer a solution through education and training of junior high school science teachers in developing the instructional design of Earth and Space Sciences (IPBA). IPBA is part of the science subjects which is given to students from elementary school to college. This research is a preliminary study of junior high school science teacher professionalism in creating instructional design IPBA. Mixed method design is used to design the research. Preliminary studies conducted on junior high school science teacher in one MGMPs in South Sumatera, and the respondent are 18 teachers from 13 schools. The educational background of science teachers who teach IPBA not only from physical education but also biology and agriculture. The result of preliminary study showed that the ratio of teachers who teach IPBA are 56% from physic education, 39% from biology, and 5% from agriculture. The subjects of IPBA that considered difficult by teachers are the distribution of sun, moon, and satellite motion; specific processes in lithosphere and atmosphere; and the correlation between lithosphere and atmosphere with the environment. The teachers also face difficulty in preparing media, choosing the right methods in teaching IPBA.

  7. The equivalence of learning paths in early science instruction: effect of direct instruction and discovery learning.

    Science.gov (United States)

    Klahr, David; Nigam, Milena

    2004-10-01

    In a study with 112 third- and fourth-grade children, we measured the relative effectiveness of discovery learning and direct instruction at two points in the learning process: (a) during the initial acquisition of the basic cognitive objective (a procedure for designing and interpreting simple, unconfounded experiments) and (b) during the subsequent transfer and application of this basic skill to more diffuse and authentic reasoning associated with the evaluation of science-fair posters. We found not only that many more children learned from direct instruction than from discovery learning, but also that when asked to make broader, richer scientific judgments, the many children who learned about experimental design from direct instruction performed as well as those few children who discovered the method on their own. These results challenge predictions derived from the presumed superiority of discovery approaches in teaching young children basic procedures for early scientific investigations.

  8. A Model of an Expanded-Frame Hypermedia Knowledge-Base for Instruction.

    Science.gov (United States)

    Lacy, Mark J.; Wood, R. Kent

    1993-01-01

    Argues that current computer-based instruction does not exploit the instructional possibilities of computers. Critiques current models of computer-based instruction: behaviorist as too linear and constructivist as too unstructured. Offers a design model of Expanded-frame Hypermedia Knowledge-bases as an instructional approach allowing hypermedia…

  9. Designing Online Software for Teaching the Concept of Variable That Facilitates Mental Interaction with the Material: Systemic Approach

    Science.gov (United States)

    Koehler, Natalya A.; Thompson, Ann D.; Correia, Ana-Paula; Hagedorn, Linda Serra

    2015-01-01

    Our case study is a response to the need for research and reporting on specific strategies employed by software designers to produce effective multimedia instructional solutions. A systemic approach for identifying appropriate software features and conducting a formative evaluation that evaluates both the overall effectiveness of the multimedia…

  10. Consumption estimation in system design for real time embedded applications; Estimation de la consommation dans la conception systeme des applications embarquees temps reel

    Energy Technology Data Exchange (ETDEWEB)

    Laurent, J.

    2002-12-15

    Today, power and energy consumption have become, as time and area, an important constraint when you design a system. Indeed modern applications use more and more processing and memory resources so these lead a significant increase of consumption. Furthermore, embedded software impact is preponderant in real time system so the code optimisation has a great impact onto the consumption constraint. Several research teams have already developed estimation methodologies for processor but almost are at instruction level (ILPA). With this kind of method you have to measure the consumption of each instruction of the instruction set and also the inter-instruction consumption overhead. For complex architecture, this kind of methodology is not adapted due to the prohibitive number of consumption measures. So the characterisation time of this kind of architecture is too important furthermore with this method is very difficult to take into account the external environment. For actual architecture another method is needed to reduce the characterisation time while preserving the accuracy. The reduction of the characterisation time have to be realized by increasing the abstraction level. So, we propose here a new approach based on a functional and architectural analysis of the target in consumption point of view (FLPA). Our methodology has two steps: the first one is a modeling step and the second is estimation step. (author)

  11. Designing for the ISD Life Cycle.

    Science.gov (United States)

    Wallace, Guy W.; Hybert, Peter R.; Smith, Kelly R.; Blecke, Brian D.

    2002-01-01

    Outlines the recent criticisms of traditional ISD (Instructional Systems Design) and discusses the implications that impact the life cycle costs of T&D (Training and Development) projects and their ROI (Return On Investment) potential. Describes a modified approach to ISD which mimics the modular approach of systems engineering design.…

  12. The Respiratory System. Instructional Materials in Anatomy and Physiology for Pennsylvania Health Occupations Programs.

    Science.gov (United States)

    National Evaluation Systems, Inc., Amherst, MA.

    This instructional modular unit with instructor's guide provides materials on aspects of one of the major systems of the human body--the respiratory system. Its purpose is to introduce the student to the structures and functions of the human respiratory system--and the interrelationships of the two--and to famlliarize the student with some of the…

  13. Interactive computer-assisted instruction in acid-base physiology for mobile computer platforms.

    Science.gov (United States)

    Longmuir, Kenneth J

    2014-03-01

    In this project, the traditional lecture hall presentation of acid-base physiology in the first-year medical school curriculum was replaced by interactive, computer-assisted instruction designed primarily for the iPad and other mobile computer platforms. Three learning modules were developed, each with ∼20 screens of information, on the subjects of the CO2-bicarbonate buffer system, other body buffer systems, and acid-base disorders. Five clinical case modules were also developed. For the learning modules, the interactive, active learning activities were primarily step-by-step learner control of explanations of complex physiological concepts, usually presented graphically. For the clinical cases, the active learning activities were primarily question-and-answer exercises that related clinical findings to the relevant basic science concepts. The student response was remarkably positive, with the interactive, active learning aspect of the instruction cited as the most important feature. Also, students cited the self-paced instruction, extensive use of interactive graphics, and side-by-side presentation of text and graphics as positive features. Most students reported that it took less time to study the subject matter with this online instruction compared with subject matter presented in the lecture hall. However, the approach to learning was highly examination driven, with most students delaying the study of the subject matter until a few days before the scheduled examination. Wider implementation of active learning computer-assisted instruction will require that instructors present subject matter interactively, that students fully embrace the responsibilities of independent learning, and that institutional administrations measure instructional effort by criteria other than scheduled hours of instruction.

  14. Flaws in current human training protocols for spontaneous Brain-Computer Interfaces: lessons learned from instructional design

    Directory of Open Access Journals (Sweden)

    Fabien eLotte

    2013-09-01

    Full Text Available While recent research on Brain-Computer Interfaces (BCI has highlighted their potential for many applications, they remain barely used outside laboratories. The main reason is their lack of robustness. Indeed, with current BCI, mental state recognition is usually slow and often incorrect. Spontaneous BCI (i.e., mental imagery-based BCI often rely on mutual learning efforts by the user and the machine, with BCI users learning to produce stable EEG patterns (spontaneous BCI control being widely acknowledged as a skill while the computer learns to automatically recognize these EEG patterns, using signal processing. Most research so far was focused on signal processing, mostly neglecting the human in the loop. However, how well the user masters the BCI skill is also a key element explaining BCI robustness. Indeed, if the user is not able to produce stable and distinct EEG patterns, then no signal processing algorithm would be able to recognize them. Unfortunately, despite the importance of BCI training protocols, they have been scarcely studied so far, and used mostly unchanged for years.In this paper, we advocate that current human training approaches for spontaneous BCI are most likely inappropriate. We notably study instructional design literature in order to identify the key requirements and guidelines for a successful training procedure that promotes a good and efficient skill learning. This literature study highlights that current spontaneous BCI user training procedures satisfy very few of these requirements and hence are likely to be suboptimal. We therefore identify the flaws in BCI training protocols according to instructional design principles, at several levels: in the instructions provided to the user, in the tasks he/she has to perform, and in the feedback provided. For each level, we propose new research directions that are theoretically expected to address some of these flaws and to help users learn the BCI skill more efficiently.

  15. 一种嵌入式MPU指令译码器设计%Design of Instruction Decoder for Use in China for an Embedded MPU

    Institute of Scientific and Technical Information of China (English)

    刘诗斌; 高德远; 樊晓桠; 李树国

    2001-01-01

    NPU Aviation Microelectronics Center has done systematic research as a part of China′s drive to be less and less dependent on importee microelectronic products . The design of instruction decoder is but a part of our MPU (microprocessor unit) project. The MPU is compatible with Intel microprocessor at instruction level . We analyzed and classified the structure of the complex instruction set and designed the decoder with due attention to its input and output. After comparing 2 feasible input schemes, we designed an eight-state state machine to so control the process of instruction input that it can be processed by decoder circuitea sily. We used table technique to generate entry address of micro program, soas to decouple the design of decoder circuit from that of the micro programs. The decoder was located in the middle of the MPU′s instruction pipeline. The length of the output queue influences the performance of the MPU. We used M/M/1/K model to analyze the queue system and determine the queue length. After embedding the decoder in MPU, we used three programs with real meaning to test the decoder. The decoder worked well with MPU and the results obtained were the same as those obtained with the Intel 8X86 PC computer.%针对与Intel系列微处理器兼容的嵌入式微处理器单元(MPU),讨论其译码器的设计问题。通 过分析比较两种可行的读入方案,择优选用了在状态机控制下的指令读入机制,并设计了具 有8个状态的状态机来控制指令读入,实现了复杂指令简单化的目的。采用表格技术将译码 器与微程序的设计分离。译码器位于MPU指令流水线的中部,其输出队列的长度影响MPU的性 能,文中近似采用M/M/1/K排队系统的分析方法,确定了输出队列长度。译码器与MP U的其 它部分联调完成后,使用具有实际意义的应用程序进行测试的结果表明,该译码器的设计是 合理有效的。

  16. Diagrammatic Representational Constraints of Spatial Scale in Earth-Moon System Astronomy Instruction

    Science.gov (United States)

    Taylor, Roger S.; Grundstrom, Erika D.

    2011-01-01

    Given that astronomy heavily relies on visual representations it is especially likely for individuals to assume that instructional materials, such as visual representations of the Earth-Moon system (EMS), would be relatively accurate. However, in our research, we found that images in middle-school textbooks and educational webpages were commonly…

  17. Implicit and Explicit Instruction of Spelling Rules

    Science.gov (United States)

    Kemper, M. J.; Verhoeven, L.; Bosman, A. M. T.

    2012-01-01

    The study aimed to compare the differential effectiveness of explicit and implicit instruction of two Dutch spelling rules. Students with and without spelling disabilities were instructed a spelling rule either implicitly or explicitly in two experiments. Effects were tested in a pretest-intervention-posttest control group design. Experiment 1…

  18. Design and Evaluation of Health Literacy Instructional Video for Pharmacy Students

    OpenAIRE

    Catherine Santanello, PhD; Lakesha M Butler, PharmD, BCPS; Radhika Devraj, PhD

    2013-01-01

    Objectives: 1) To describe the development of a health literacy video tailored for pharmacy students. 2) To compare the use of a health literacy video as an instructional method to a previously used health literacy instructional strategy by using both and: a) assessing pharmacy students' perceptions of their ability to communicate with low health literacy patients and b) assessing pharmacy students' perceptions of their overall understanding of the role of health literacy in a pharmacy settin...

  19. An Instructional Design Model with the Cultivating Research-Based Learning Strategies for Fostering Teacher Students' Creative Thinking Abilities

    Science.gov (United States)

    Khuana, Khwanchai; Khuana, Tanthip; Santiboon, Toansakul

    2017-01-01

    Designing the instructional model with the innovative the "Research-Based Learning Strategy Lesson Plans" of the effectiveness of the processing performance and the resulting performance (E1/E2) with the IOC value determining standardized criteria of 80/80 were developed. Students' perceptions were assessed with the 30-item…

  20. Aligning the Quantum Perspective of Learning to Instructional Design: Exploring the Seven Definitive Questions

    Directory of Open Access Journals (Sweden)

    Katherine J. Janzen

    2011-11-01

    Full Text Available This paper builds upon a foundational paper (under review which explores the rudiments of the quantum perspective of learning. The quantum perspective of learning uses the principles of exchange theory or borrowed theory from the field of quantum holism pioneered by quantum physicist David Bohm (1971, 1973 to understand learning in a new way. Bohm proposes that everything exists as wholes, rather than as parts, and that everything is connected. Similarly, the quantum perspective of learning proposes that individuals learn in holistic ways as they interact with temporal and in infinitely extending virtual worlds. Further, according to the quantum perspective of learning, learners have infinite potential. In this paper, the quantum perspective of learning is examined utilizing a combination of Schunk’s (1991 and Ertmer and Newby’s (1993 definitive questions for aligning learning theory with instructional design. These seven definitive questions focus on how learning happens, influential factors in learning, the role of memory, transfer of knowledge, modalities of learning that can best explain the quantum perspective of learning, applicable assumptions, and a discussion of how instruction can be organized to optimize learning. Examples of strategies that facilitate the quantum perspective of learning are provided.

  1. Scaffolding in Assisted Instruction

    Directory of Open Access Journals (Sweden)

    2007-01-01

    Full Text Available On-The-Job Training, developed as direct instruction, is one of the earliest forms of training. This method is still widely in use today because it requires only a person who knows how to do the task, and the tools the person uses to do the task. This paper is intended to be a study of the methods used in education in Knowledge Society, with more specific aspects in training the trainers; as a result of this approach, it promotes scaffolding in assisted instruction as a reflection of the digital age for the learning process. Training the trainers in old environment with default techniques and designing the learning process in assisted instruction, as an application of the Vygotskian concept of the zone of proximal development (ZPD to the area of computer literacy for the younger users, generate diversity in educational communities and requires standards for technology infrastructure, standards for the content, developed as a concepts map, and applications for personalized in-struction, based on ZPD theory.

  2. Impacts of insufficient instructional materials on teaching biology: Higher education systems in focus

    Directory of Open Access Journals (Sweden)

    Sutuma Edessa

    2017-01-01

    Full Text Available Abstract The purpose of this study was to assess and determine impacts of insufficient instructional materials and ineffective lesson delivery methods on teaching in biology higher education. The participants of this study were 60 trainees who graduated in Bachelor of Sciences from eight public universities in majoring biology. Data for the study was collected while these trainees were attending the course of Biology Teaching Methods in the Post Graduate Diploma in Teaching, both in the regular and summer 2015/2016 training programs at Addis Ababa University. The study employs a mixed method design of both qualitative and quantitative data evaluations. Data was collected through classroom observations and interviews with the trainees. The findings indicated that insufficient instructional materials and ineffective teaching methods in higher education had negative impacts; that have affected the skills of performing biological tasks of graduates 71%. In the course of the Post Graduate Diploma in Teaching training, trainees were unsuccessful to conduct essential biological tasks expected from graduates of biology upon the completion of their undergraduate study program. The study was concluded with emphasis on the need to integrate theory and practice through using adequate instructional materials and proper teaching methods in the higher education biology teaching.

  3. User-Centred Design for Chinese-Oriented Spoken English Learning System

    Science.gov (United States)

    Yu, Ping; Pan, Yingxin; Li, Chen; Zhang, Zengxiu; Shi, Qin; Chu, Wenpei; Liu, Mingzhuo; Zhu, Zhiting

    2016-01-01

    Oral production is an important part in English learning. Lack of a language environment with efficient instruction and feedback is a big issue for non-native speakers' English spoken skill improvement. A computer-assisted language learning system can provide many potential benefits to language learners. It allows adequate instructions and instant…

  4. Using Web-Based Instruction to Teach Music Theory in the Piano Studio: Defining, Designing, and Implementing an Integrative Approach

    Science.gov (United States)

    Carney, Robert D.

    2010-01-01

    This dissertation rationalizes the best use of Web-based instruction (WBI) for teaching music theory to private piano students in the later primary grades. It uses an integrative research methodology for defining, designing, and implementing a curriculum that includes WBI. Research from the fields of music education, educational technology,…

  5. Systematic Development of Instruction for Non-Residential Colleges.

    Science.gov (United States)

    Yelon, Stephen L.

    Nonresidential colleges are well-developed instructional systems that take into account system resources and constraints, system goals, human learning and communication principles, and subject matter structure. This document presents a discussion of 2 such instructional systems, the British Open University and New York's Empire State College, and…

  6. Perspectives and Plans for Graduate Studies. 11. Engineering 1974. E. Industrial Engineering and Systems Design. Report No. 74-22.

    Science.gov (United States)

    Ontario Council on Graduate Studies, Toronto. Advisory Committee on Academic Planning.

    On the instruction of the Council of Ontario Universities, the Advisory Committee on Academic Planning in cooperation with the Committee of Ontario Deans of Engineering has conducted a planning assessment for doctoral work in industrial engineering and systems design. Recommendations for doctoral work in engineering studies are presented.…

  7. Categories for Observing Language Arts Instruction (COLAI).

    Science.gov (United States)

    Benterud, Julianna G.

    Designed to study individual use of time spent in reading during regularly scheduled language arts instruction in a natural classroom setting, this coding sheet consists of nine categories: (1) engagement, (2) area of language arts, (3) instructional setting, (4) partner (teacher or pupil(s)), (5) source of content, (6) type of unit, (7) assigned…

  8. Cognitive Theory of Multimedia Learning, Instructional Design Principles, and Students with Learning Disabilities in Computer-Based and Online Learning Environments

    Science.gov (United States)

    Greer, Diana L.; Crutchfield, Stephen A.; Woods, Kari L.

    2013-01-01

    Struggling learners and students with Learning Disabilities often exhibit unique cognitive processing and working memory characteristics that may not align with instructional design principles developed with typically developing learners. This paper explains the Cognitive Theory of Multimedia Learning and underlying Cognitive Load Theory, and…

  9. Bibliographic Instruction and the Development of Online Catalogs.

    Science.gov (United States)

    McDonald, David R.; Searing, Susan E.

    1983-01-01

    Discusses the definition of an online library catalog; five factors to be considered by the online catalog designer; user-computer communication (error messages, help screens, prompts, unnatural language); online tutorials and offline instruction offered by bibliographic instruction librarians; and the current situation. Nine references are…

  10. Improve Student Understanding Ability Through Gamification in Instructional Media Based Explicit Instruction

    Science.gov (United States)

    Firdausi, N.; Prabawa, H. W.; Sutarno, H.

    2017-02-01

    In an effort to maximize a student’s academic growth, one of the tools available to educators is the explicit instruction. Explicit instruction is marked by a series of support or scaffold, where the students will be guided through the learning process with a clear statement of purpose and a reason for learning new skills, a clear explanation and demonstration of learning targets, supported and practiced with independent feedback until mastery has been achieved. The technology development trend of todays, requires an adjustment in the development of learning object that supports the achievement of explicit instruction targets. This is where the gamification position is. In the role as a pedagogical strategy, the use of gamification preformance study class is still relatively new. Gamification not only use the game elements and game design techniques in non-game contexts, but also to empower and engage learners with the ability of motivation on learning approach and maintains a relaxed atmosphere. With using Reseach and Development methods, this paper presents the integration of technology (which in this case using the concept of gamification) in explicit instruction settings and the impact on the improvement of students’ understanding.

  11. The Effect of Individualized Instruction System on the Academic Achievement Scores of Students

    Directory of Open Access Journals (Sweden)

    Ferhat Bahçeci

    2016-01-01

    Full Text Available A web-based learning portal offering individualized learning was developed by utilizing rule-based knowledge representation and artificial intelligence techniques of expert systems in order to reduce the uncertainties of learning to minimum and to construct an intelligent tutoring system. This portal offers individualized learning content based on the individual’s level of cognitive knowledge. In order to determine the effects of the developed system on the student achievement, the system was tested in an 8-week-long study on the students of Software Engineering Department of Technology Faculty. The pretest-posttest control group experimental design was used in the study. The experimental group received education with Individualized Instruction Portal while the control group received education in traditional learning environment. Academic achievement test was used as the data collection tool. In order to test the research hypotheses, data obtained from the data collection tools were analysed in terms of frequency, percentages, and dependent-independent t-test with statistical software program. Based on the results, no significant differences were found between the groups in terms of the pretest. On the other hand, significant differences were found between experimental and control group in terms of the posttest. It was concluded that individualized learning portal had positive effect on the students’ learning when used in combination with traditional learning environment.

  12. Typology of after-hours care instructions for patients

    Science.gov (United States)

    Bordman, Risa; Bovett, Monica; Drummond, Neil; Crighton, Eric J.; Wheler, David; Moineddin, Rahim; White, David

    2007-01-01

    OBJECTIVE To develop a typology of after-hours care (AHC) instructions and to examine physician and practice characteristics associated with each type of instruction. DESIGN Cross-sectional telephone survey. Physicians’ offices were called during evenings and weekends to listen to their messages regarding AHC. All messages were categorized. Thematic analysis of a subset of messages was conducted to develop a typology of AHC instructions. Logistic regression analysis was used to identify associations between physician and practice characteristics and the instructions left for patients. SETTING Family practices in the greater Toronto area. PARTICIPANTS Stratified random sample of family physicians providing office-based primary care. MAIN OUTCOME MEASURES Form of response (eg, answering machine), content of message, and physician and practice characteristics. RESULTS Of 514 after-hours messages from family physicians’ offices, 421 were obtained from answering machines, 58 were obtained from answering services, 23 had no answer, 2 gave pager numbers, and 10 had other responses. Message content ranged from no AHC instructions to detailed advice; 54% of messages provided a single instruction, and the rest provided a combination of instructions. Content analysis identified 815 discrete instructions or types of response that were classified into 7 categories: 302 instructed patients to go to an emergency department; 122 provided direct contact with a physician; 115 told patients to go to a clinic; 94 left no directions; 76 suggested calling a housecall service; 45 suggested calling Telehealth; and 61 suggested other things. About 22% of messages only advised attending an emergency department, and 18% gave no advice at all. Physicians who were female, had Canadian certification in family medicine, held hospital privileges, or had attended a Canadian medical school were more likely to be directly available to their patients. CONCLUSION Important issues identified

  13. Instructional Partners, Principals, Teachers, and Instructional Assistants.

    Science.gov (United States)

    Indiana State Dept. of Public Instruction, Indianapolis.

    This handbook examines various topics of interest and concern to teachers as they work with instructional assistants forming a classroom instructional partnership and functioning as a team. These topics include: (1) instructional assistant qualifications; (2) duties--instructional, classroom clerical, auxillary; (3) factors to be considered when…

  14. Knowledge Based Artificial Augmentation Intelligence Technology: Next Step in Academic Instructional Tools for Distance Learning

    Science.gov (United States)

    Crowe, Dale; LaPierre, Martin; Kebritchi, Mansureh

    2017-01-01

    With augmented intelligence/knowledge based system (KBS) it is now possible to develop distance learning applications to support both curriculum and administrative tasks. Instructional designers and information technology (IT) professionals are now moving from the programmable systems era that started in the 1950s to the cognitive computing era.…

  15. Animating Instructional Materials in Computer Education: An Approach to Designing and Teaching Concepts in Data Structures Using LATEX

    Directory of Open Access Journals (Sweden)

    Damilola Osikoya

    2012-08-01

    Full Text Available Animation gives a different perception on what is being visually presented. Research has shown that students are likely to understand what is being taught from the combination of animation and text than just with text. Students easily understand scientific concepts in narrative and animated forms. Data structure is a way of storing and arranging data. The efficacy of searching these stored data is very important, so is it vital that they are stored with the right algorithm. This paper presents animations designed to support teaching in computer education. Our main focus is to present controlled animated instructional materials in teaching topics in data structures. We have created three scientifically animated instructional materials in data structures consisting of the Stacks, Queues and Trees. These scientific spheres have been chosen to demonstrate the basic ideas of this work, because of its simplicity in representing the animations. We hope to develop reasonable sets of instructional material of different subject areas that will be stored in a database repository. These are intended to be delivered to students through an e-learning website and/or Mobile phones to support them with additional learning opportunities.

  16. Anaerobic Digestion. Selected Instructional Activities and References. Instructional Resources Monograph Series.

    Science.gov (United States)

    Townsend, Robert D., Comp.

    Focusing specifically on the wastewater treatment process of anaerobic digestion, this document identifies instructional and reference materials for use by professionals in the field in the development and implementation of new programs or in the updating of existing programs. It is designed to help trainers, plant operators, educators, engineers,…

  17. Instructional design strategies for developing an interactive video educational program for pregnant teens: a pilot study.

    Science.gov (United States)

    Levenson, P M; Morrow, J R; Smith, P

    1984-01-01

    One hundred forty-six teens attending an urban maternity hospital's prenatal clinic completed a questionnaire designed to assist in the development of educational programs utilizing computer-assisted television instruction or interactive video. Ninety-five percent of the teens agreed that additional information about desirable health behaviors during pregnancy would be helpful. Forty-six percent preferred obtaining information from a health professional at the hospital. Although 90% said that the race of the narrator for a film show was unimportant, responses regarding racial preference corresponded to the racial distribution of participants. Seventy-six percent of the teens preferred the narrator to be younger than 35 years of age, and 54% preferred a female narrator. Race was associated with video game experiences, preferences about the narrator's age and race, and favorite television shows. Age was not associated with responses to any of the questions. Although only 19% had ever used a computer, 98% stated they would like to try a computer with assistance. More than half (55%) knew how to type and 83% had played video games; of those who had played video games, 93% said they enjoyed doing so. Eighty-three percent of the respondents always or sometimes enjoyed cartoons. Favorite television shows and cartoon characters were identified. The design implications of the teens' preferences to the development of instruction using computers coupled with other emerging technologies are discussed.

  18. 162.5 MHz digital low-level radio frequency control monitoring system design and implementation

    International Nuclear Information System (INIS)

    Zhang Ruifeng; Wang Xianwu; Xu Zhe; Yi Xiaoping

    2014-01-01

    162.5 MHz high-frequency low-level control system self-developed by Institute of Modern Physics for ADS project took digital technology. All parameters' reading and writing, including loop parameter setting, open and close-loop operation, and condition monitoring, were achieved through the monitoring system. The system used lightweight client-server working mode that client running in the PC sent command data, server running on high-frequency digital low level system responded instructions to complete parameter monitoring and control. The system consisted of three parts. Firstly, server hardware system was constructed based on Atera Stratix Ⅲ family of field-programmable gate array (FPGA) development board. Secondly, the server software system was designed based on Micro C/OS Ⅱ real-time operating systems and lightweight TCP/IP protocol stack, and finally a client PC program was designed based on MFC. After a long test, it was indicated that the monitoring system works properly and stably. TCP sends and receives throughput reached 11.931038 Mbps and 8.117624 Mbps. (authors)

  19. Effects of socioscientific issues-based instruction on argumentation ability and biology concepts of upper secondary school students

    Science.gov (United States)

    Faelt, Surasak; Samiphak, Sara; Pattaradilokrat, Sittiporn

    2018-01-01

    Argumentation skill is an essential skill needed in students, and one of the competencies in scientific literacy. Through arguing on socioscientific issues, students may gain deeper conceptual understanding. The purpose of this research is to examine the efficacy of a socioscientific issues-based instruction compared with an inquirybased instruction. This is to determine which one is better in promoting 10th grade students' argumentation ability and biology concepts of digestive system and cellular respiration. The forty 10th grade students included in this study were from two mathematics-science program classes in a medium-sized secondary school located in a suburb of Buriram province, Thailand. The research utilizes a quasi-experimental design; pre-test post-test control group design. We developed and implemented 4 lesson plans for both socioscientific issues-based instruction and inquiry-based instruction. Ten weeks were used to collect the data. A paper-based questionnaire and informal interviews were designed to test students' argumentation ability, and the two-tier multiple-choice test was designed to test their biology concepts. This research explore qualitatively and quantitatively students' argumentation abilities and biology concepts, using arithmetic mean, mean of percentage, standard deviation and t-test. Results show that there is no significant difference between the two group regarding mean scores of the argumentation ability. However, there is significant difference between the two groups regarding mean scores of the biology concepts. This suggests that socioscientific issues-based instruction could be used to improve students' biology concepts.

  20. Experimental study of liquid-metal target designs of accelerating-controlled systems

    International Nuclear Information System (INIS)

    Iarmonov, Mikhail; Makhov, Kirill; Novozhilova, Olga; Meluzov, A.G.; Beznosov, A.V.

    2011-01-01

    Models of a liquid-metal target of an accelerator-controlled system have been experimentally studied at the Nizhny Novgorod State Technical University to develop an optimal design of the flow part of the target. The main explored variants of liquid-metal targets are: Design with a diaphragm (firm-and-impervious plug) mounted on the pipe tap of particle transport from the accelerator cavity to the working cavity of the liquid-metal target. Design without a diaphragm on the pipe tab of particle transport from the accelerator. The study was carried out in a high-temperature liquid-metal test bench under the conditions close to full-scale ones: the temperature of the eutectic lead-bismuth alloy was 260degC - 400degC, the coolant mass flow was 5-80 t/h, and the rarefaction in the gas cavity was 10 5 Pa, the coefficient of geometric similarity equal to 1. The experimental studies of hydrodynamic characteristics of flow parts in the designs of targets under full-scale conditions indicated high efficiency of a target in triggering, operating, and deactivating modes. Research and technology instructions for designs of the flow part of the liquid-metal target, the target design as a whole, and the target circuit of accelerator-controlled systems were formulated as a result of the studies. (author)

  1. Students’ Aesthetics Experience, Creative Self-Efficacy and Creativity: Is Creativity Instruction Effective?

    OpenAIRE

    Yuan-Cheng Chang; Chia-Chun Hsiao

    2016-01-01

    Based on creativity component theory, creativity system theory and creative self-efficacy theory, this study aims to explore the influence of college students’ aesthetics experience and creative self-efficacy on their creativity and the role of creativity instruction as a mediator variable. The participants were 338 college design majors in 50 teams who were working on their graduation exhibitions, and 50 advising professors from departments related to design. Hierarchical Linear Models were ...

  2. Instructional Psychology 1976 - 1981,

    Science.gov (United States)

    1982-06-01

    business it is to carry out applied work in the design of instructional content and delivery. These organizations include specialized divisions of...34learning disabilities" label: An experimental analysis. Comtemporary Educational Psychology, 1977, 2, 292-297. Allington, R. L. Sensitivity to

  3. Initial Progress Rates as Related to Performance in a Personalized System of Instruction

    Science.gov (United States)

    Henneberry, John K.

    1976-01-01

    Discusses research which explored the hypothesis that students who are fast starters in a personalized system of instruction psychology course would perform better and maintain faster course progress rates than slow starters. Findings indicate that students' starting pace is predictive of course performance and subsequent progress rates.…

  4. Principals' Instructional Leadership within a Teacher Performance Appraisal System: Enhancing Students' Academic Success

    Science.gov (United States)

    Ovando, Martha N.; Ramirez, Alfredo, Jr.

    2007-01-01

    The purpose of this study was to identify principals' instructional leadership actions within a comprehensive teacher evaluation system in successful schools rated as recognized or exemplary by the accountability measures in place. The study followed a multiple case study approach. Participants included six school administrators within the same…

  5. Effects of an Intelligent Web-Based English Instruction System on Students' Academic Performance

    Science.gov (United States)

    Jia, J.; Chen, Y.; Ding, Z.; Bai, Y.; Yang, B.; Li, M.; Qi, J.

    2013-01-01

    This research conducted quasi-experiments in four middle schools to evaluate the long-term effects of an intelligent web-based English instruction system, Computer Simulation in Educational Communication (CSIEC), on students' academic attainment. The analysis of regular examination scores and vocabulary test validates the positive impact of CSIEC,…

  6. Leading for Instructional Improvement in the Context of Accountability: Central Office Leadership

    Science.gov (United States)

    Rigby, Jessica Goodman; Corriell, Rebecca; Kuhl, Katie J.

    2018-01-01

    This case was written to help prepare central office leaders who are expected to design systems and lead toward instructional improvement in the context of both educational accountability and implementation of standards with increased rigor. The intent of this case study is to encourage educators to examine the complex and multiple challenges of…

  7. Cooperative learning as applied to resident instruction in radiology reporting.

    Science.gov (United States)

    Mueller, Donald; Georges, Alexandra; Vaslow, Dale

    2007-12-01

    The study is designed to evaluate the effectiveness of an active form of resident instruction, cooperative learning, and the residents' response to that form of instruction. The residents dictated three sets of reports both before and after instruction in radiology reporting using the cooperative learning method. The reports were evaluated for word count, Flesch-Kincaid grade level, advancement on clinical spectrum, clarity, and comparison to prior reports. The reports were evaluated for changes in performance characteristics between the pre- and postinstruction dictations. The residents' response to this form of instruction was evaluated by means of a questionnaire. The instruction was effective in changing the resident dictations. The results became shorter (Pcooperative learning activities. The least positive responses related to the amount of time devoted to the project. Sixty-three percent of respondents stated that the time devoted to the project was appropriate. Cooperative learning can be an effective tool in the setting of the radiology residency. Instructional time requirements must be strongly considered in designing a cooperative learning program.

  8. “Clicking” with your audience: Evaluating the use of personal response systems in library instruction

    Directory of Open Access Journals (Sweden)

    Emily K. Chan

    2011-03-01

    Full Text Available University of the Pacific librarians used personal response systems (PRS or clickers in first-year mandatory library instructional sessions to assess their effects on student engagement and retention of learning outcomes. Students who utilized clickers during their library session reported greater enjoyment and encouragement to participate (n=291. Students in the sessions not utilizing the clickers achieved better learning outcomes than their counterparts who utilized clickers (n=326. The implications of these results are discussed, specifically within the context of pedagogy and tailoring instruction to the Millennial generation.

  9. GCtool for fuel cell systems design and analysis : user documentation.

    Energy Technology Data Exchange (ETDEWEB)

    Ahluwalia, R.K.; Geyer, H.K.

    1999-01-15

    GCtool is a comprehensive system design and analysis tool for fuel cell and other power systems. A user can analyze any configuration of component modules and flows under steady-state or dynamic conditions. Component models can be arbitrarily complex in modeling sophistication and new models can be added easily by the user. GCtool also treats arbitrary system constraints over part or all of the system, including the specification of nonlinear objective functions to be minimized subject to nonlinear, equality or inequality constraints. This document describes the essential features of the interpreted language and the window-based GCtool environment. The system components incorporated into GCtool include a gas flow mixer, splitier, heater, compressor, gas turbine, heat exchanger, pump, pipe, diffuser, nozzle, steam drum, feed water heater, combustor, chemical reactor, condenser, fuel cells (proton exchange membrane, solid oxide, phosphoric acid, and molten carbonate), shaft, generator, motor, and methanol steam reformer. Several examples of system analysis at various levels of complexity are presented. Also given are instructions for generating two- and three-dimensional plots of data and the details of interfacing new models to GCtool.

  10. Literacity: A multimedia adult literacy package combining NASA technology, recursive ID theory, and authentic instruction theory

    Science.gov (United States)

    Willis, Jerry; Willis, Dee Anna; Walsh, Clare; Stephens, Elizabeth; Murphy, Timothy; Price, Jerry; Stevens, William; Jackson, Kevin; Villareal, James A.; Way, Bob

    1994-01-01

    An important part of NASA's mission involves the secondary application of its technologies in the public and private sectors. One current application under development is LiteraCity, a simulation-based instructional package for adults who do not have functional reading skills. Using fuzzy logic routines and other technologies developed by NASA's Information Systems Directorate and hypermedia sound, graphics, and animation technologies the project attempts to overcome the limited impact of adult literacy assessment and instruction by involving the adult in an interactive simulation of real-life literacy activities. The project uses a recursive instructional development model and authentic instruction theory. This paper describes one component of a project to design, develop, and produce a series of computer-based, multimedia instructional packages. The packages are being developed for use in adult literacy programs, particularly in correctional education centers. They use the concepts of authentic instruction and authentic assessment to guide development. All the packages to be developed are instructional simulations. The first is a simulation of 'finding a friend a job.'

  11. Processing Instruction: A review of issues

    OpenAIRE

    Muhlisin Rasuki

    2017-01-01

    This paper provides a critical review of Processing Instruction (PI). This type of instructional option was specifically designed to help second/foreign language (L2) learners grasp meaning manifested in the use of particular grammatical forms in a target language effectively through the provision of input. In this way, PI attempts to help learners develop grammatical competence in a target language in ways that foster their comprehension and production skills. The paper starts with outlining...

  12. An Arts-Based Instructional Model for Student Creativity in Engineering Design

    Directory of Open Access Journals (Sweden)

    Brian Laduca

    2017-02-01

    Full Text Available Over the past twenty years, nearly all job growth in the United States has emerged from new companies and organizations with assumedly innovative products, services, and practices. Yet, the nurturing of student creative thinking and problem solving is infrequent in engineering education. Inherent to developing these creativity skills and attributes is the need to be exposed to difference — in people and environment. Engineering education rarely offers such opportunities. Additionally, engineering students are rarely presented opportunities to develop designs responding to real human problems. This paper puts forth a new instructional model to address these needs by utilizing arts processes and practices as catalysts for both creativity development in students and transdisciplinary collaboration on problems addressing deep human needs. This model is premised on the substantiated role of the arts in developing creativity and growing understanding of the human condition. This art-based instructional model was piloted as exploratory pedagogical research during the summers of 2015 and 2016 as a partnership between the Arts Nexus (IAN and the School of Engineering at the University of Dayton. In each year, this program supported twelve student interns from engineering, business, science, the arts, and the humanities to develop innovative technologies and services meeting client needs. Student growth in creative problem-solving and transdisciplinary collaboration, as well as the success of the completed innovation technology prototype were assessed by the project mentors and participating students via survey evaluations and narrative responses. The assessment results revealed substantial student growth in student creativity and transdisciplinary collaboration and a remarkably strong evaluation of the success of the students’ innovations. Also realized for all students was a transformation in their perception of their place in the world as

  13. DEVELOPMENT OF MULTIMEDIA-BASED INSTRUCTIONAL OF NATURAL SCIENCE IN SOLAR SYSTEM MATERIAL IN THE GRADE IX FOR HEARING IMPAIRMENT STUDENTS

    Directory of Open Access Journals (Sweden)

    Nurvita Dwi Andriani

    2016-12-01

    Full Text Available Hearing impairment students have limitation in obtaining information. Hearing impairment students needs a multimedia-based instructional to visualize a subject matter as a learning experience. This study was aimed at producing a theoretically and empirically valid multimedia-based instructional of Natural Science in Solar System material which is reviewed by experts and could be implemented in Segment B of SMPLB (Hearing impairment students. This study employed a research and development (R&D model by William W. Lee and Diana L. Owens. Overall, the multimedia-based instructional of Natural Science in Solar System material for Segment B of SMPLB (Hearing impairment students was valid

  14. Designing information systems

    CERN Document Server

    Blethyn, Stanley G

    2014-01-01

    Designing Information Systems focuses on the processes, methodologies, and approaches involved in designing information systems. The book first describes systems, management and control, and how to design information systems. Discussions focus on documents produced from the functional construction function, users, operators, analysts, programmers and others, process management and control, levels of management, open systems, design of management information systems, and business system description, partitioning, and leveling. The text then takes a look at functional specification and functiona

  15. Using a Personalized System of Instruction to Improve the Writing Skills of Undergraduates.

    Science.gov (United States)

    Allen, George J.

    1984-01-01

    A traditional abnormal psychology course was restructured to emphasize writing using a personalized system of instruction. The major benefit was that students showed significant improvement in writing style and clarity. The major costs of the course were the high student turnover and the abnormally large workload for students and instructor. (RM)

  16. The importance of the instructional guide in the design of virtual learning environments

    Directory of Open Access Journals (Sweden)

    Aida Mercedes Gomez-Suarez

    2017-07-01

    Full Text Available The appropriation of information and communication technologies (ICTs in the processes of teaching and learning is one of the main challenges of educational institutions and teachers in the current society of knowledge, as responsible for a use Rational and meaningful use of its digital educational resources (RED. This involves developing competencies in the implementation of ICT in the classroom to enrich the learning environments. This article presents a reflection on the instructional guide as a didactic tool in the elaboration of RED that facilitates the design of these resources to support the activities of the classroom in these processes. This reflection is the result of a research on the subject carried out in a context of university teaching

  17. CCP-NAP operator instructions at ANL

    International Nuclear Information System (INIS)

    Tantillo, V.V.

    1986-03-01

    CCP-NAP Operator Instructions at ANL (ANL/TM 435) supplements the CCPGUIDE (Category 26) prepared by the National Magnetic Fusion Energy Computer Center (NMFECC), Lawrence Livermore National Laboratory. The instructions in CCP-NAP Operator Instructions at ANL serve as a reference guide for Computing Services operators when operator intervention is necessary for ANL's MFEnet Nodes located in Building 221, Room A-134. Use this document in conjunction with the CCPGUIDE. The CCPGUIDE, a guide for network operators, outlines the procedures for loading the Communications Control Processor (CCP) and monitoring its activity. The CCPGUIDE contains detailed information on Software Loading, System Status, System Monitoring, Command Summary, etc. The material in this document is the result of additional information provided by Jim Morton and Jim Gigliaridi (NMFECC) when our Argonne National Laboratory/Computing Services MFEnet Nodes were installed. This document provides two formats: QUICK instructions and procedures, and detailed general text

  18. How the Framing of Instructional Coaching as a Lever for Systemic or Individual Reform Influences the Enactment of Coaching

    Science.gov (United States)

    Mangin, Melinda M.; Dunsmore, KaiLonnie

    2015-01-01

    Purpose: Instructional coaching is framed as both a means for systemic and individual reform. These competing conceptualizations of coaching as a mechanism for change have not been systematically examined, and therefore, we know little about how the framing of instructional coaching initiatives affects the enactment of coaching. In response to…

  19. An Instructional Strategy Framework for Online Learning Environments.

    Science.gov (United States)

    Johnson, Scott D.; Aragon, Steven R.

    The rapid growth of Web-based instruction has raised many questions about the quality of online courses. It appears that many online courses are simply modeled after traditional forms of instruction instead of incorporating a design that takes advantage of the unique capabilities of Web-based learning environments. This paper describes a research…

  20. Interactive computer-based instruction: Basic material control and accounting demonstration

    International Nuclear Information System (INIS)

    Keisch, B.

    1993-01-01

    The use of interactive, computer-based training (CBT) courses can be a time- and resource-saving alternative to formal instruction in a classroom milieu. With CBT, students can proceed at their own pace, fit the study course into their schedule, and avoid the extra time and effort involved in travel and other special arrangements. The demonstration given here is an abbreviated, annotated version of a recently developed course in basic material control and accounting designed for the MC and A novice. The system used is ''Quest'' which includes multi-media capabilities, individual scoring, and built-in result-reporting capabilities for the course administrator. Efficient instruction and training are more important than ever because of the growing numbers of relatively inexperienced persons becoming active in safeguards

  1. Hydraulic Analysis of the Contribution of Emergency Water to C. N. Almaraz Systems Affected as a Result of the Complementary Technical Instructions issued by the CSN after Fukushima

    International Nuclear Information System (INIS)

    Vilar Carmona, G.; Puertas Munoz, S.; Arguello Tara, A.; Sanz Roman, F. J.

    2013-01-01

    This paper presents the study and hydraulic analysis of the capacity required contribution of emergency water to the Almaraz NPP to power systems deal with the accidental events outside the bases of design defined in the Complementary technical instructions generated by the CSN after Fukushima. Through the program of balanced hydraulic SBAL, developed by entrepreneurs Grouped (EE.AA) and used in multiple security systems analysis, and based on designs and requirements to be fulfilled by the Almaraz NPP of the different strategies are set, have developed a series of hydraulic models that they have allowed the definition and dimensioning of the portable media and the new connections required in the central systems.

  2. VLSI System Implementation of 200 MHz, 8-bit, 90nm CMOS Arithmetic and Logic Unit (ALU Processor Controller

    Directory of Open Access Journals (Sweden)

    Fazal NOORBASHA

    2012-08-01

    Full Text Available In this present study includes the Very Large Scale Integration (VLSI system implementation of 200MHz, 8-bit, 90nm Complementary Metal Oxide Semiconductor (CMOS Arithmetic and Logic Unit (ALU processor control with logic gate design style and 0.12µm six metal 90nm CMOS fabrication technology. The system blocks and the behaviour are defined and the logical design is implemented in gate level in the design phase. Then, the logic circuits are simulated and the subunits are converted in to 90nm CMOS layout. Finally, in order to construct the VLSI system these units are placed in the floor plan and simulated with analog and digital, logic and switch level simulators. The results of the simulations indicates that the VLSI system can control different instructions which can divided into sub groups: transfer instructions, arithmetic and logic instructions, rotate and shift instructions, branch instructions, input/output instructions, control instructions. The data bus of the system is 16-bit. It runs at 200MHz, and operating power is 1.2V. In this paper, the parametric analysis of the system, the design steps and obtained results are explained.

  3. A Criterion-Referenced Approach to Student Ratings of Instruction

    Science.gov (United States)

    Meyer, J. Patrick; Doromal, Justin B.; Wei, Xiaoxin; Zhu, Shi

    2017-01-01

    We developed a criterion-referenced student rating of instruction (SRI) to facilitate formative assessment of teaching. It involves four dimensions of teaching quality that are grounded in current instructional design principles: Organization and structure, Assessment and feedback, Personal interactions, and Academic rigor. Using item response…

  4. Long multiplication by instruction sequences with backward jump instructions

    NARCIS (Netherlands)

    Bergstra, J.A.; Middelburg, C.A.

    2013-01-01

    For each function on bit strings, its restriction to bit strings of any given length can be computed by a finite instruction sequence that contains only instructions to set and get the content of Boolean registers, forward jump instructions, and a termination instruction. Backward jump instructions

  5. Design issues on using FPGA-based I and C systems in nuclear reactors

    Energy Technology Data Exchange (ETDEWEB)

    Farias, Marcos S.; Carvalho, Paulo Victor R. de; Santos, Isaac Jose A.L. dos; Lacerda, Fabio de, E-mail: msantana@ien.gov.br, E-mail: paulov@ien.gov.br, E-mail: luquetti@ien.gov.br, E-mail: acerda@ien.gov.br [Instituto de Engenharia Nuclear (IEN/CNEN-RJ), Rio de Janeiro, RJ (Brazil). Div. de Engenharia Nuclear

    2015-07-01

    The FPGA (field programmable gate array) is widely used in various fields of industry. FPGAs can be used to perform functions that are safety critical and require high reliability, like in automobiles, aircraft control and assistance and mission-critical applications in the aerospace industry. With these merits, FPGAs are receiving increased attention worldwide for application in nuclear plant instrumentation and control (I and C) systems, mainly for Reactor Protection System (RPS). Reasons for this include the fact that conventional analog electronics technologies are become obsolete. I and C systems of new Reactors have been designed to adopt the digital equipment such as PLC (Programmable Logic Controller) and DCS (Distributed Control System). But microprocessors-based systems may not be simply qualified because of its complex characteristics. For example, microprocessor cores execute one instruction at a time, and an operating system is needed to manage the execution of programs. In turn, FPGAs can run without an operating system and the design architecture is inherently parallel. In this paper we aim to assess these and other advantages, and the limitations, on FPGA-based solutions, considering the design guidelines and regulations on the use of FPGAs in Nuclear Plant I and C Systems. We will also examine some circuit design techniques in FPGA to help mitigate failures and provide redundancy. The objective is to show how FPGA-based systems can provide cost-effective options for I and C systems in modernization projects and to the RMB (Brazilian Multipurpose Reactor), ensuring safe and reliable operation, meeting licensing requirements, such as separation, redundancy and diversity. (author)

  6. Effects of interactive instructional techniques in a web-based peripheral nervous system component for human anatomy.

    Science.gov (United States)

    Allen, Edwin B; Walls, Richard T; Reilly, Frank D

    2008-02-01

    This study investigated the effects of interactive instructional techniques in a web-based peripheral nervous system (PNS) component of a first year medical school human anatomy course. Existing data from 9 years of instruction involving 856 students were used to determine (1) the effect of web-based interactive instructional techniques on written exam item performance and (2) differences between student opinions of the benefit level of five different types of interactive learning objects used. The interactive learning objects included Patient Case studies, review Games, Simulated Interactive Patients (SIP), Flashcards, and unit Quizzes. Exam item analysis scores were found to be significantly higher (p < 0.05) for students receiving the instructional treatment incorporating the web-based interactive learning objects than for students not receiving this treatment. Questionnaires using a five-point Likert scale were analysed to determine student opinion ratings of the interactive learning objects. Students reported favorably on the benefit level of all learning objects. Students rated the benefit level of the Simulated Interactive Patients (SIP) highest, and this rating was significantly higher (p < 0.05) than all other learning objects. This study suggests that web-based interactive instructional techniques improve student exam performance. Students indicated a strong acceptance of Simulated Interactive Patient learning objects.

  7. A Comprehensive Rubric for Instructional Design in E-Learning

    Science.gov (United States)

    Debattista, Martin

    2018-01-01

    Purpose: The recognition of practice in online instruction is still subject to interpretation and different approaches as a result of the rapid changes in technology and its effect on society. The purpose of this paper is to address these differences through a synthesis that can be easily accessed and consulted by educators in the field of…

  8. Reprogrammable Controller Design From High-Level Specification

    Directory of Open Access Journals (Sweden)

    M. Benmohammed

    2003-10-01

    Full Text Available Existing techniques in high-level synthesis mostly assume a simple controller architecture model in the form of a single FSM. However, in reality more complex controller architectures are often used. On the other hand, in the case of programmable processors, the controller architecture is largely defined by the available control-flow instructions in the instruction set. With the wider acceptance of behavioral synthesis, the application of these methods for the design of programmable controllers is of fundamental importance in embedded system technology. This paper describes an important extension of an existing architectural synthesis system targeting the generation of ASIP reprogrammable architectures. The designer can then generate both style of architecture, hardwired and programmable, using the same synthesis system and can quickly evaluate the trade-offs of hardware decisions.

  9. Teacher Candidate Technology Integration: For Student Learning or Instruction?

    Science.gov (United States)

    Clark, Cynthia; Zhang, Shaoan; Strudler, Neal

    2015-01-01

    Transfer of instructional technology knowledge for student-centered learning by teacher candidates is investigated in this study. Using the transfer of learning theoretical framework, a mixed methods research design was employed to investigate whether secondary teacher candidates were able to transfer the instructional technology knowledge for…

  10. Instructions for submittal and control of FFTF design documents and design related documentation

    International Nuclear Information System (INIS)

    Grush, R.E.

    1976-10-01

    This document provides the system and requirements for management of FFTF technical data prepared by Westinghouse Hanford (HEDL), and design contractors, the construction contractor and lower tier equipment suppliers. Included in this document are provisions for the review, approval, release, change control, and accounting of FFTF design disclosure and base documentation. Also included are provisions for submittal of other design related documents for review and approval consistent with applicable requirements of RDT-Standard F 2-2, ''Quality Assurance Program Requirements.''

  11. Apparel. Teacher's Instructional Guide.

    Science.gov (United States)

    Rambo, Patti

    This instructional guide for a one-half credit technological laboratory course for grades 10-12 focuses on apparel from the perspectives of personal decision making related to apparel, the apparel industry, and career preparation. Introductory materials are a course description; overview of course design; facilities, equipment, and resources; and…

  12. You Are Not Logged In: Context and Interpersonal Meaning of Instructions and Links in a typical Learning Management System

    Directory of Open Access Journals (Sweden)

    Hakeem Olafemi Ogunmuyiwa

    2016-11-01

    Full Text Available It is common knowledge that the incorporation of Learning Management Systems (LMS in ESL/EFL instruction has enhanced learners understanding of the language just as it has helped teachers in monitoring students’ progress. However, the use of these eLearning platforms can be quite challenging for EFL learners who are yet to be proficient in the English language. This is because all course information and instructions are offered in the language. Following the notion of context and language metafunctions by Halliday (1985 and his followers, analysis of some linguistic expressions in typical learning management systems is conducted. I show how context and interpersonal meanings are established, and how they can enhance learners’ comprehension of information and instructions. The linguistic expressions used as data are sourced from student-specific pages of the web-based Learning Management System (Blackboard and the Modular Object-Oriented Dynamic Learning Environment (Moodle as adapted in colleges and institutes in Saudi Arabia.

  13. Cultural dimensions of learning: Addressing the challenges of multicultural instruction

    OpenAIRE

    Patrick Parrish; Jennifer A. Linder-VanBerschot

    2010-01-01

    The growing multicultural nature of education and training environments makes it critical that instructors and instructional designers, especially those working in online learning environments, develop skills to deliver culturally sensitive and culturally adaptive instruction. This article explores research into cultural differences to identify those dimensions of culture that are most likely to impact instructional situations. It presents these in the cultural dimensions of learning framewor...

  14. Multimedia instructions and cognitive load theory: effects of modality and cueing.

    Science.gov (United States)

    Tabbers, Huib K; Martens, Rob L; van Merriënboer, Jeroen J G

    2004-03-01

    Recent research on the influence of presentation format on the effectiveness of multimedia instructions has yielded some interesting results. According to cognitive load theory (Sweller, Van Merriënboer, & Paas, 1998) and Mayer's theory of multimedia learning (Mayer, 2001), replacing visual text with spoken text (the modality effect) and adding visual cues relating elements of a picture to the text (the cueing effect) both increase the effectiveness of multimedia instructions in terms of better learning results or less mental effort spent. The aim of this study was to test the generalisability of the modality and cueing effect in a classroom setting. The participants were 111 second-year students from the Department of Education at the University of Gent in Belgium (age between 19 and 25 years). The participants studied a web-based multimedia lesson on instructional design for about one hour. Afterwards they completed a retention and a transfer test. During both the instruction and the tests, self-report measures of mental effort were administered. Adding visual cues to the pictures resulted in higher retention scores, while replacing visual text with spoken text resulted in lower retention and transfer scores. Only a weak cueing effect and even a reverse modality effect have been found, indicating that both effects do not easily generalise to non-laboratory settings. A possible explanation for the reversed modality effect is that the multimedia instructions in this study were learner-paced, as opposed to the system-paced instructions used in earlier research.

  15. Axioms for behavioural congruence of single-pass instruction sequences

    NARCIS (Netherlands)

    Bergstra, J.A.; Middelburg, C.A.

    2017-01-01

    In program algebra, an algebraic theory of single-pass instruction sequences, three congruences on instruction sequences are paid attention to: instruction sequence congruence, structural congruence, and behavioural congruence. Sound and complete axiom systems for the first two congruences were

  16. Developing Marine Science Instructional Materials Using Integrated Scientist-Educator Collaborative Design Teams: A Discussion of Challenges and Success Developing Real Time Data Projects for the COOL Classroom

    Science.gov (United States)

    McDonnell, J.; Duncan, R. G.; Glenn, S.

    2007-12-01

    Current reforms in science education place increasing demands on teachers and students to engage not only with scientific content but also to develop an understanding of the nature of scientific inquiry (AAAS, 1993; NRC, 1996). Teachers are expected to engage students with authentic scientific practices including posing questions, conducting observations, analyzing data, developing explanations and arguing about them using evidence. This charge is challenging for many reasons most notably the difficulty in obtaining meaningful data about complex scientific phenomena that can be used to address relevant scientific questions that are interesting and understandable to K-12 students. We believe that ocean sciences provide an excellent context for fostering scientific inquiry in the classroom. Of particular interest are the technological and scientific advances of Ocean Observing Systems, which allow scientists to continuously interact with instruments, facilities, and other scientists to explore the earth-ocean- atmosphere system remotely. Oceanographers are making long-term measurements that can also resolve episodic oceanic processes on a wide range of spatial and temporal scales crucial to resolving scientific questions related to Earth's climate, geodynamics, and marine ecosystems. The availability of a diverse array of large data sets that are easily accessible provides a unique opportunity to develop inquiry-based learning environments in which students can explore many important questions that reflect current research trends in ocean sciences. In addition, due to the interdisciplinary nature of the ocean sciences these data sets can be used to examine ocean phenomena from a chemical, physical, or biological perspective; making them particularly useful for science teaching across the disciplines. In this session we will describe some of the efforts of the Centers for Ocean Sciences Education Excellence- Mid Atlantic (COSEE MA) to develop instructional materials

  17. The nature of instructional effects in color constancy.

    Science.gov (United States)

    Radonjić, Ana; Brainard, David H

    2016-06-01

    The instructions subjects receive can have a large effect on experimentally measured color constancy, but the nature of these effects and how their existence should inform our understanding of color perception remains unclear. We used a factorial design to measure how instructional effects on constancy vary with experimental task and stimulus set. In each of 2 experiments, we employed both a classic adjustment-based asymmetric matching task and a novel color selection task. Four groups of naive subjects were instructed to make adjustments/selections based on (a) color (neutral instructions); (b) the light reaching the eye (physical spectrum instructions); (c) the actual surface reflectance of an object (objective reflectance instructions); or (d) the apparent surface reflectance of an object (apparent reflectance instructions). Across the 2 experiments we varied the naturalness of the stimuli. We find clear interactions between instructions, task, and stimuli. With simplified stimuli (Experiment 1), instructional effects were large and the data revealed 2 instruction-dependent patterns. In 1 (neutral and physical spectrum instructions) constancy was low, intersubject variability was also low, and adjustment-based and selection-based constancy were in agreement. In the other (reflectance instructions) constancy was high, intersubject variability was large, adjustment-based constancy deviated from selection-based constancy and for some subjects selection-based constancy increased across sessions. Similar patterns held for naturalistic stimuli (Experiment 2), although instructional effects were smaller. We interpret these 2 patterns as signatures of distinct task strategies-1 is perceptual, with judgments based primarily on the perceptual representation of color; the other involves explicit instruction-driven reasoning. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

  18. Designing learning environments to teach interactive Quantum Physics

    NARCIS (Netherlands)

    Gómez Puente, S.M.; Swagten, H.J.M.

    2012-01-01

    This study aims at describing and analysing systematically an interactive learning environment designed to teach Quantum Physics, a second-year physics course. The instructional design of Quantum Physics is a combination of interactive lectures (using audience response systems), tutorials and

  19. Evaluation of a Theory of Instructional Sequences for Physics Instruction

    Science.gov (United States)

    Wackermann, Rainer; Trendel, Georg; Fischer, Hans E.

    2010-05-01

    The background of the study is the theory of basis models of teaching and learning, a comprehensive set of models of learning processes which includes, for example, learning through experience and problem-solving. The combined use of different models of learning processes has not been fully investigated and it is frequently not clear under what circumstances a particular model should be used by teachers. In contrast, the theory under investigation here gives guidelines for choosing a particular model and provides instructional sequences for each model. The aim is to investigate the implementation of the theory applied to physics instruction and to show if possible effects for the students may be attributed to the use of the theory. Therefore, a theory-oriented education programme for 18 physics teachers was developed and implemented in the 2005/06 school year. The main features of the intervention consisted of coaching physics lessons and video analysis according to the theory. The study follows a pre-treatment-post design with non-equivalent control group. Findings of repeated-measures ANOVAs show large effects for teachers' subjective beliefs, large effects for classroom actions, and small to medium effects for student outcomes such as perceived instructional quality and student emotions. The teachers/classes that applied the theory especially well according to video analysis showed the larger effects. The results showed that differentiating between different models of learning processes improves physics instruction. Effects can be followed through to student outcomes. The education programme effect was clearer for classroom actions and students' outcomes than for teachers' beliefs.

  20. Processing Instruction: A review of issues

    Directory of Open Access Journals (Sweden)

    Muhlisin Rasuki

    2017-07-01

    Full Text Available This paper provides a critical review of Processing Instruction (PI. This type of instructional option was specifically designed to help second/foreign language (L2 learners grasp meaning manifested in the use of particular grammatical forms in a target language effectively through the provision of input. In this way, PI attempts to help learners develop grammatical competence in a target language in ways that foster their comprehension and production skills. The paper starts with outlining main characteristics of PI which distinguish it from other types of L2 grammar instruction. Then, a large body of research attempting to investigate the relative efficacy of PI is scrutinized. The paper concludes with a number of important issues that future studies on PI need to address.

  1. IBES: A Tool for Creating Instructions Based on Event Segmentation

    Directory of Open Access Journals (Sweden)

    Katharina eMura

    2013-12-01

    Full Text Available Receiving informative, well-structured, and well-designed instructions supports performance and memory in assembly tasks. We describe IBES, a tool with which users can quickly and easily create multimedia, step-by-step instructions by segmenting a video of a task into segments. In a validation study we demonstrate that the step-by-step structure of the visual instructions created by the tool corresponds to the natural event boundaries, which are assessed by event segmentation and are known to play an important role in memory processes. In one part of the study, twenty participants created instructions based on videos of two different scenarios by using the proposed tool. In the other part of the study, ten and twelve participants respectively segmented videos of the same scenarios yielding event boundaries for coarse and fine events. We found that the visual steps chosen by the participants for creating the instruction manual had corresponding events in the event segmentation. The number of instructional steps was a compromise between the number of fine and coarse events. Our interpretation of results is that the tool picks up on natural human event perception processes of segmenting an ongoing activity into events and enables the convenient transfer into meaningful multimedia instructions for assembly tasks. We discuss the practical application of IBES, for example, creating manuals for differing expertise levels, and give suggestions for research on user-oriented instructional design based on this tool.

  2. IBES: a tool for creating instructions based on event segmentation.

    Science.gov (United States)

    Mura, Katharina; Petersen, Nils; Huff, Markus; Ghose, Tandra

    2013-12-26

    Receiving informative, well-structured, and well-designed instructions supports performance and memory in assembly tasks. We describe IBES, a tool with which users can quickly and easily create multimedia, step-by-step instructions by segmenting a video of a task into segments. In a validation study we demonstrate that the step-by-step structure of the visual instructions created by the tool corresponds to the natural event boundaries, which are assessed by event segmentation and are known to play an important role in memory processes. In one part of the study, 20 participants created instructions based on videos of two different scenarios by using the proposed tool. In the other part of the study, 10 and 12 participants respectively segmented videos of the same scenarios yielding event boundaries for coarse and fine events. We found that the visual steps chosen by the participants for creating the instruction manual had corresponding events in the event segmentation. The number of instructional steps was a compromise between the number of fine and coarse events. Our interpretation of results is that the tool picks up on natural human event perception processes of segmenting an ongoing activity into events and enables the convenient transfer into meaningful multimedia instructions for assembly tasks. We discuss the practical application of IBES, for example, creating manuals for differing expertise levels, and give suggestions for research on user-oriented instructional design based on this tool.

  3. Instructional immediacy in elearning.

    Science.gov (United States)

    Walkem, Kerrie

    2014-01-01

    Instructor immediacy has been positively associated with many desirable academic outcomes including increased student learning. This study extends existing understanding of instructional immediacy behaviours in elearning by describing postgraduate nursing students' reflections on their own experience. An exploratory, descriptive survey design was used to collect qualitative data. Participants were asked what behaviours or activities help to create rapport or a positive interpersonal connection (immediacy) between students and their online teacher(s). Thematic analysis of the data revealed three main themes: acknowledging and affirming student's personal and professional responsibilities; providing clear and timely information; and utilising rich media. These findings give lecturers insight into instructional strategies they may adopt to increase immediacy in elearning and hence improve student learning outcomes.

  4. Revising the IDEA Student Ratings of Instruction System 2002-2011 Data. IDEA Technical Report No. 18

    Science.gov (United States)

    Benton, Stephen L.; Li, Dan; Brown, Ron; Guo, Meixi; Sullivan, Patricia

    2015-01-01

    This report describes the processes undertaken to revise the IDEA Student Ratings of Instruction (SRI) system. The previous revision occurred in 1999, as described in IDEA Technical Report No. 11, "Revising the IDEA System for Obtaining Student Ratings of Instructors and Courses" (Hoyt, Chen, Pallett, & Gross, 1999). The procedures…

  5. Instructional Technology in the Armed Forces.

    Science.gov (United States)

    Hitchens, Howard B., Jr.

    Broad areas of communications media used in technical training in specific occupational skills within the armed forces are examined in the first part of this report. These areas include: traditional audiovisual media, television, the techniques of programed instruction and instructional systems development, and the use of computers. In the second…

  6. A Study of Job Demands and Curriculum Development in Agricultural Training Related to the Muskegon County Wastewater Management System. Final Report. Volume III. Student Terminal Performance Objectives and Instructional Modules.

    Science.gov (United States)

    Fisher, Harold S.; And Others

    This is the third volume of a four-volume report of a research project designed to (1) identify job needs for agricultural occupations which will result from the Muskegon County Wastewater Management System and perform a task analysis on each occupation, (2) develop instructional modules and determine their place in either high school or 2-year…

  7. An Expert Instructor's Use of Social Congruence, Cognitive Congruence, and Expertise in an Online Case-Based Instructional Design Course

    Science.gov (United States)

    Watson, Sunnie Lee; Koehler, Adrie A.; Ertmer, Peggy; Kim, WooRi; Rico, Rudy

    2018-01-01

    Promoting and sustaining effective discussion--that which contributes to learning--is a skill that eludes many instructors (Darling-Hammond, 2008; Ge, Yamashiro, & Lee, 2000). This study explored the role and strategies of an expert instructor in an online advanced instructional design (ID) course that utilized a case-based learning (CBL)…

  8. Development and Testing of an Experimental Polysensory Instructional System for Teaching Electric Arc Welding Processes. Report No. 24. Final Report.

    Science.gov (United States)

    Sergeant, Harold A.

    The population of the study consisted of 15 high school industrial arts students, 10 freshman and sophomore college students, and 10 adults. A polysensory, self-pacing instructional system was developed which included (1) pretests and post tests, (2) a general instruction book, (3) equipment to practice arc welding, (4) programed instruction…

  9. Bibliographic Instruction in the 21st Century.

    Science.gov (United States)

    Poirier, Gayle

    2000-01-01

    Discusses bibliographic instruction in libraries. Topics include a history of bibliographic instruction; the Internet and electronic searching; librarians' use of technology; defining information needs; locating and accessing information, including classification systems and Boolean searching; evaluating information; using and communication…

  10. Reactor System Design

    International Nuclear Information System (INIS)

    Chi, S. K.; Kim, G. K.; Yeo, J. W.

    2006-08-01

    SMART NPP(Nuclear Power Plant) has been developed for duel purpose, electricity generation and energy supply for seawater desalination. The objective of this project IS to design the reactor system of SMART pilot plant(SMART-P) which will be built and operated for the integrated technology verification of SMART. SMART-P is an integral reactor in which primary components of reactor coolant system are enclosed in single pressure vessel without connecting pipes. The major components installed within a vessel includes a core, twelve steam generator cassettes, a low-temperature self pressurizer, twelve control rod drives, and two main coolant pumps. SMART-P reactor system design was categorized to the reactor coe design, fluid system design, reactor mechanical design, major component design and MMIS design. Reactor safety -analysis and performance analysis were performed for developed SMART=P reactor system. Also, the preparation of safety analysis report, and the technical support for licensing acquisition are performed

  11. Control system design guide

    Energy Technology Data Exchange (ETDEWEB)

    Sellers, David; Friedman, Hannah; Haasl, Tudi; Bourassa, Norman; Piette, Mary Ann

    2003-05-01

    The ''Control System Design Guide'' (Design Guide) provides methods and recommendations for the control system design process and control point selection and installation. Control systems are often the most problematic system in a building. A good design process that takes into account maintenance, operation, and commissioning can lead to a smoothly operating and efficient building. To this end, the Design Guide provides a toolbox of templates for improving control system design and specification. HVAC designers are the primary audience for the Design Guide. The control design process it presents will help produce well-designed control systems that achieve efficient and robust operation. The spreadsheet examples for control valve schedules, damper schedules, and points lists can streamline the use of the control system design concepts set forth in the Design Guide by providing convenient starting points from which designers can build. Although each reader brings their own unique questions to the text, the Design Guide contains information that designers, commissioning providers, operators, and owners will find useful.

  12. Cultural Dimensions of Learning: Addressing the Challenges of Multicultural Instruction

    Science.gov (United States)

    Parrish, Patrick; Linder-VanBerschot, Jennifer A.

    2010-01-01

    The growing multicultural nature of education and training environments makes it critical that instructors and instructional designers, especially those working in online learning environments, develop skills to deliver culturally sensitive and culturally adaptive instruction. This article explores research into cultural differences to identify…

  13. Combat Systems Department Employee Recognition System

    National Research Council Canada - National Science Library

    1996-01-01

    This handbook contains two types of information: guidelines and instructions. The guidelines provide a foundation of purpose, assumptions, principles, expectations and attributes the Employee Recognition System is designed to reflect...

  14. Instructional strategies to improve women's attitudes toward science

    Science.gov (United States)

    Newbill, Phyllis Leary

    Although negative attitudes toward science are common among women and men in undergraduate introductory science classes, women's attitudes toward science tend to be more negative than men's. The reasons for women's negative attitudes toward science include lack of self-confidence, fear of association with social outcasts, lack of women role models in science, and the fundamental differences between traditional scientific and feminist values. Attitudes are psychological constructs theorized to be composed of emotional, cognitive, and behavioral components. Attitudes serve functions, including social expressive, value expressive, utilitarian, and defensive functions, for the people who hold them. To change attitudes, the new attitudes must serve the same function as the old one, and all three components must be treated. Instructional designers can create instructional environments to effect attitude change. In designing instruction to improve women's attitudes toward science, instructional designers should (a) address the emotions that are associated with existing attitudes, (b) involve credible, attractive women role models, and (c) address the functions of the existing attitudes. Two experimental instructional modules were developed based on these recommendations, and two control modules were developed that were not based on these recommendations. The asynchronous, web-based modules were administered to 281 undergraduate geology and chemistry students at two universities. Attitude assessment revealed that attitudes toward scientists improved significantly more in the experimental group, although there was no significant difference in overall attitudes toward science. Women's attitudes improved significantly more than men's in both the experimental and control groups. Students whose attitudes changed wrote significantly more in journaling activities associated with the modules. Qualitative analysis of journals revealed that the guidelines worked exactly as predicted

  15. Instructional Strategies to Support Creativity and Innovation in Education

    Science.gov (United States)

    Seechaliao, Thapanee

    2017-01-01

    The purpose of the study focused on the instructional strategies that support creation of creative and innovative education. The sample for this study consisted of 11 experts in the field of instructional strategies that support innovation of education. Among them, five were specialists in design and development of teaching and learning, three…

  16. Invention Versus Direct Instruction: For Some Content, It's a Tie

    Science.gov (United States)

    Chase, Catherine C.; Klahr, David

    2017-12-01

    An important, but as yet unresolved pedagogical question is whether discovery-oriented or direct instruction methods lead to greater learning and transfer. We address this issue in a study with 101 fourth and fifth grade students that contrasts two distinct instructional methods. One is a blend of discovery and direct instruction called Invent-then-Tell (IT), and the other is a version of direct instruction called Tell-then-Practice (TP). The relative effectiveness of these methods is compared in the context of learning a critical inquiry skill—the control-of-variables strategy. Previous research has demonstrated the success of IT over TP for teaching deep domain structures, while other research has demonstrated the superiority of direct instruction for teaching simple experimental design, a domain-general inquiry skill. In the present study, students in both conditions made equally large gains on an immediate assessment of their application and conceptual understanding of experimental design, and they also performed similarly on a test of far transfer. These results were fairly consistent across school populations with various levels of prior achievement and socioeconomic status. Findings suggest that broad claims about the relative effectiveness of these two distinct methods should be conditionalized by particular instructional contexts, such as the type of knowledge being taught.

  17. Computer System Design System-on-Chip

    CERN Document Server

    Flynn, Michael J

    2011-01-01

    The next generation of computer system designers will be less concerned about details of processors and memories, and more concerned about the elements of a system tailored to particular applications. These designers will have a fundamental knowledge of processors and other elements in the system, but the success of their design will depend on the skills in making system-level tradeoffs that optimize the cost, performance and other attributes to meet application requirements. This book provides a new treatment of computer system design, particularly for System-on-Chip (SOC), which addresses th

  18. Improving physics instruction by analyzing video games

    Science.gov (United States)

    Beatty, Ian D.

    2013-01-01

    Video games can be very powerful teaching systems, and game designers have become adept at optimizing player engagement while scaffolding development of complex skills and situated knowledge. One implication is that we might create games to teach physics. Another, which I explore here, is that we might learn to improve classroom physics instruction by studying effective games. James Gee, in his book What Video Games Have to Teach Us About Learning and Literacy (2007), articulates 36 principles that make good video games highly effective as learning environments. In this theoretical work, I identify 16 themes running through Gee's principles, and explore how these themes and Gee's principles could be applied to the design of an on-campus physics course. I argue that the process pushes us to confront aspects of learning that physics instructors and even physics education researchers generally neglect, and suggest some novel ideas for course design.

  19. Student-Centered Instruction and Academic Achievement: Linking Mechanisms of Educational Inequality to Schools’ Instructional Strategy

    DEFF Research Database (Denmark)

    Andersen, Ida Gran; Andersen, Simon Calmar

    2017-01-01

    educational inequality. We analyze whether the impact of student-centered instructional strategies on academic achievement differs for students with different socioeconomic backgrounds. Results suggest that a student-centered instructional strategy has a negative impact on academic achievement in general......, and for students with low parental education in particular. Our findings support the argument that the instructional strategy of schools is an important mechanism in generating educational inequality through the stratification of learning opportunities.......Research in the sociology of education argues that the educational system provides different learning opportunities for students with different socioeconomic backgrounds and that this circumstance makes the educational process an important institutional context for the reproduction of educational...

  20. Development of core thermal-hydraulics module for intelligent reactor design system (IRDS)

    International Nuclear Information System (INIS)

    Kugo, Teruhiko; Nakagawa, Masayuki; Fujii, Sadao.

    1994-08-01

    We have developed an innovative reactor core thermal-hydraulics module where a designer can easily and efficiently evaluate his design concept of a new type reactor in the thermal-hydraulics field. The main purpose of this module is to decide a feasible range of basic design parameters of a reactor core in a conceptual design stage of a new type reactor. The module is to be implemented in Intelligent Reactor Design System (IRDS). The module has the following characteristics; 1) to deal with several reactor types, 2) four thermal hydraulics and fuel behavior analysis codes are installed to treat different type of reactors and design detail, 3) to follow flexibly modification of a reactor concept, 4) to provide analysis results in an understandable way so that a designer can easily evaluate feasibility of his concept, and so on. The module runs on an engineering workstation (EWS) and has a user-friendly man-machine interface on a pre- and post-processing. And it is equipped with a function to search a feasible range called as Design Window, for two design parameters by artificial intelligence (AI) technique and knowledge engineering. In this report, structure, guidance for users of an usage of the module and instruction of input data for analysis modules are presented. (author)

  1. Book Club Plus: A Conceptual Framework To Organize Literacy Instruction.

    Science.gov (United States)

    Raphael, Taffy E.; Florio-Ruane, Susan; George, MariAnne

    2001-01-01

    Notes that finding time for skills instruction without replacing literature discussion and writers' workshop requires a strong organizational framework for literacy instruction. Suggests that teachers need principled, conceptual frameworks to guide their thoughts and actions. Describes a framework, Book Club Plus, designed by a practitioner…

  2. Interservice Procedures for Instructional Systems Development. Phase 4 and 5. Implement and Control

    Science.gov (United States)

    1975-08-01

    FIGUREIZ.2: Flowchart ot Block]Z.1: IMPLEMENT INSTRUCTIONAL MANAGEMENT PLAN BLOCK IV.2: CONDUCT INSTRUCTION LEA Oa.lNUt kaP INSTRUCTIONAL INIIANAI EL...DOCUMENTATION 2.1 [ BTAIN REQUIRED _ _ I 2.J2 CONDUCT INSTRUCTION 1 1 AND DOCUMENT OBSERVATIONS 2.3 ACTIVITIES 2.4 I BLOCK FIGURE ]V.3: Flowchart of...not have the entry skills. The entry skills determi- nation is important to know whether to place the students at the beginn - ing or provide

  3. Effects of multimedia vocabulary instruction on adolescents with learning disabilities.

    Science.gov (United States)

    Kennedy, Michael J; Deshler, Donald D; Lloyd, John Wills

    2015-01-01

    The purpose of this experimental study is to investigate the effects of using content acquisition podcasts (CAPs), an example of instructional technology, to provide vocabulary instruction to adolescents with and without learning disabilities (LD). A total of 279 urban high school students, including 30 with LD in an area related to reading, were randomly assigned to one of four experimental conditions with instruction occurring at individual computer terminals over a 3-week period. Each of the four conditions contained different configurations of multimedia-based instruction and evidence-based vocabulary instruction. Dependent measures of vocabulary knowledge indicated that students with LD who received vocabulary instruction using CAPs through an explicit instructional methodology and the keyword mnemonic strategy significantly outperformed other students with LD who were taught using the same content, but with multimedia instruction that did not adhere to a specific theoretical design framework. Results for general education students mirrored those for students with LD. Students also completed a satisfaction measure following instruction with multimedia and expressed overall agreement that CAPs are useful for learning vocabulary terms. © Hammill Institute on Disabilities 2013.

  4. Using Interactive Video Instruction To Enhance Public Speaking Instruction.

    Science.gov (United States)

    Cronin, Michael W.; Kennan, William R.

    Noting that interactive video instruction (IVI) should not and cannot replace classroom instruction, this paper offers an introduction to interactive video instruction as an innovative technology that can be used to expand pedagogical opportunities in public speaking instruction. The paper: (1) defines the distinctive features of IVI; (2) assesses…

  5. Effects of instructions and cue subjectiveness on specificity of autobiographical memory recall

    Directory of Open Access Journals (Sweden)

    Jorge J. Ricarte-Trives

    2014-10-01

    Full Text Available The first aim of this study was to determine the power of instructions on the specificity of autobiographical memory as obtained with the Autobiographical Memory Test (AMT; Williams & Broadbent, 1986 and the efficacy of cue word criteria selection based on subjective parameters obtained with a standardized lexical program. Results showed a high power of specific instructions in its written version in contrast to non-directed memory recall to the same list of words three weeks later in a counterbalanced repeated measures within-subjects design. This effect was stronger when subjects previously were faced to the non-specific recovery task. Matched word lists using the "Buscapalabras" program (Davis & Perea, 2005 showed a very similar behaviour. These results point out that the same stimuli can be used repeatedly to obtain voluntary and involuntary retrieval with changes at instructional level. Additionally, standardized lexical programs can be employed to adapt cue-words of memory recall systems controlling for subjective differences related to language parameters (frequency, imageability and familiarity.

  6. Teaching, Doing, and Sharing Project Management in a Studio Environment: The Development of an Instructional Design Open-Source Project Management Textbook

    Science.gov (United States)

    Randall, Daniel L.; Johnson, Jacquelyn C.; West, Richard E.; Wiley, David A.

    2013-01-01

    In this article, the authors present an example of a project-based course within a studio environment that taught collaborative innovation skills and produced an open-source project management textbook for the field of instructional design and technology. While innovation plays an important role in our economy, and many have studied how to teach…

  7. Video Games: A Human Factors Guide to Visual Display Design and Instructional System Design

    Science.gov (United States)

    1984-04-01

    Abstract K Electronic video games have many of the same technological and psychological characteristics that are found in military computer-based...employed as learning vehicles, the especially compelling characteristics of electronic video games have not been fully explored for possible exploitation...new electronic video games . !? Accordingly, the following experiment was designed to determine those m dimensions along which electronic

  8. The Digestive System [and] Instructor's Guide. Instructional Materials in Anatomy and Physiology for Pennsylvania Health Occupations Programs.

    Science.gov (United States)

    National Evaluation Systems, Inc., Amherst, MA.

    This instructional modular unit wlth instructor's guide provides materials on important aspects of one of the major systems of the human body--the digestive system. Its purpose is to introduce the student to the structures and functions of the human digestive system--and the interrelationships of the two--and to familiarize the student with some…

  9. A Measurement Model of Microgenetic Transfer for Improving Instructional Outcomes

    Science.gov (United States)

    Pavlik, Philip I., Jr.; Yudelson, Michael; Koedinger, Kenneth R.

    2015-01-01

    Efforts to improve instructional task design often make reference to the mental structures, such as "schemas" (e.g., Gick & Holyoak, 1983) or "identical elements" (Thorndike & Woodworth, 1901), that are common to both the instructional and target tasks. This component based (e.g., Singley & Anderson, 1989) approach…

  10. VLSI design

    CERN Document Server

    Einspruch, Norman G

    1986-01-01

    VLSI Electronics Microstructure Science, Volume 14: VLSI Design presents a comprehensive exposition and assessment of the developments and trends in VLSI (Very Large Scale Integration) electronics. This volume covers topics that range from microscopic aspects of materials behavior and device performance to the comprehension of VLSI in systems applications. Each article is prepared by a recognized authority. The subjects discussed in this book include VLSI processor design methodology; the RISC (Reduced Instruction Set Computer); the VLSI testing program; silicon compilers for VLSI; and special

  11. The Effectiveness of Web-Based Instruction: An Initial Inquiry

    Directory of Open Access Journals (Sweden)

    Tatana M. Olson

    2002-10-01

    Full Text Available As the use of Web-based instruction increases in the educational and training domains, many people have recognized the importance of evaluating its effects on student outcomes such as learning, performance, and satisfaction. Often, these results are compared to those of conventional classroom instruction in order to determine which method is “better.” However, major differences in technology and presentation rather than instructional content can obscure the true relationship between Web-based instruction and these outcomes. Computer-based instruction (CBI, with more features similar to Web-based instruction, may be a more appropriate benchmark than conventional classroom instruction. Furthermore, there is little consensus as to what variables should be examined or what measures of learning are the most appropriate, making comparisons between studies difficult and inconclusive. In this article, we review the historical findings of CBI as an appropriate benchmark to Web-based instruction. In addition, we review 47 reports of evaluations of Web-based courses in higher education published between 1996 and 2002. A tabulation of the documented findings into eight characteristics is offered, along with our assessments of the experimental designs, effect sizes, and the degree to which the evaluations incorporated features unique to Web-based instruction.

  12. Comparison of Effects of Teaching English to Thai Undergraduate Teacher-Students through Cross-Curricular Thematic Instruction Program Based on Multiple Intelligence Theory and Conventional Instruction

    Science.gov (United States)

    Rattanavich, Saowalak

    2013-01-01

    This study is aimed at comparing the effects of teaching English to Thai undergraduate teacher-students through cross-curricular thematic instruction program based on multiple intelligence theory and through conventional instruction. Two experimental groups, which utilized Randomized True Control Group-Pretest-posttest Time Series Design and…

  13. Learning and performance under alternative instructional manifestations of experimental practice

    Science.gov (United States)

    Ford, Michael J.

    Before we can understand how students learn "to do" science, we must make explicit our assumptions about what scientific practice is. This study compares the learning outcomes of two sixth-grade instructional units on experimentation, each based on a particular characterization of practice. In one unit, instruction focused on acquisition and application of the control of variables strategy (CVS; Chen & Klahr, 1999), which is consistent with a popular conception of science education, stemming from Piaget, as the mastery of logical forms. In the other unit, students designed experimental apparatus to answer a target question, and instruction emphasized practices of rendering and transforming the material world in ways that support scientific understanding. Students in both groups were assessed for CVS acquisition and subsequent experimental performance on a novel task, and group performances on these assessments different across instructional conditions. I will argue that student understandings of goals, norms of instructional expectation, and strategies explain these differences, in some cases by supporting performance and in other cases by hindering it. I will also argue that the results question the role typically attributed to logical method in learning to design experiments.

  14. Teacher perspectives on whole-task information literacy instruction

    NARCIS (Netherlands)

    Wopereis, Iwan; Frerejean, Jimmy; Brand-Gruwel, Saskia

    2017-01-01

    This paper presents results of an explorative study on perceived merits of contemporary holistic approaches to designing information literacy instruction in a university setting. Seven teachers in educational sciences evaluated their premaster’s course on conducting a literature review designed

  15. Teacher perspectives on whole-task information literacy instruction

    NARCIS (Netherlands)

    Wopereis, Iwan; Frerejean, Jimmy; Brand-Gruwel, Saskia

    2018-01-01

    This paper presents results of an explorative study on perceived merits of contemporary holistic approaches to designing information literacy instruction in a university setting. Seven teachers in educational sciences evaluated their premaster’s course on conducting a literature review designed

  16. Optical system design

    CERN Document Server

    Fischer, Robert F

    2008-01-01

    Honed for more than 20 years in an SPIE professional course taught by renowned optical systems designer Robert E. Fischer, Optical System Design, Second Edition brings you the latest cutting-edge design techniques and more than 400 detailed diagrams that clearly illustrate every major procedure in optical design. This thoroughly updated resource helps you work better and faster with computer-aided optical design techniques, diffractive optics, and the latest applications, including digital imaging, telecommunications, and machine vision. No need for complex, unnecessary mathematical derivations-instead, you get hundreds of examples that break the techniques down into understandable steps. For twenty-first century optical design without the mystery, the authoritative Optical Systems Design, Second Edition features: Computer-aided design use explained through sample problems Case studies of third-millennium applications in digital imaging, sensors, lasers, machine vision, and more New chapters on optomechanic...

  17. Evaluating the Diagnostic Validity of the Facet-Based Formative Assessment System

    Science.gov (United States)

    DeBarger, Angela H.; DiBello, Louis; Minstrell, Jim; Stout, William; Pellegrino, James; Haertel, Geneva; Feng, Mingyu

    2011-01-01

    The research design and team constitute a multidisciplinary attack on problems of educational and assessment design in physics instruction. Components of the research include: (a) an Evidence-Centered Design analysis of Diagnoser instructional materials and assessments that provides a view of the evidentiary coherence of the existing system; (b)…

  18. Technology-Assisted Sheltered Instruction: Instructional Streaming Video in an EFL Multi-Purpose Computer Course

    Science.gov (United States)

    Huang, Yun-Hsuan; Chuang, Tsung-Yen

    2016-01-01

    Content-based instruction (CBI) has been widely adopted for decades. However, existing CBI models cannot always be effectively put into practice, especially for learners of lower English proficiency in English as a foreign language (EFL) context. This study examined an animation design course adopting CBI to promote reading abilities of English…

  19. Instruction to Help Young Children Develop Language and Literacy Skills: The Roles of Program Design and Instructional Guidance

    Science.gov (United States)

    Gunn, Barbara; Vadasy, Patricia; Smolkowski, Keith

    2011-01-01

    This article discusses the kinds of instructional activities that young children need to develop basic language and literacy skills based on recent research and program evaluations. This includes approaches to develop alphabetic understanding, phonological awareness, vocabulary, and oral language. Activities and materials from the Pre-kindergarten…

  20. Design an optimum safety policy for personnel safety management - A system dynamic approach

    International Nuclear Information System (INIS)

    Balaji, P.

    2014-01-01

    Personnel safety management (PSM) ensures that employee's work conditions are healthy and safe by various proactive and reactive approaches. Nowadays it is a complex phenomenon because of increasing dynamic nature of organisations which results in an increase of accidents. An important part of accident prevention is to understand the existing system properly and make safety strategies for that system. System dynamics modelling appears to be an appropriate methodology to explore and make strategy for PSM. Many system dynamics models of industrial systems have been built entirely for specific host firms. This thesis illustrates an alternative approach. The generic system dynamics model of Personnel safety management was developed and tested in a host firm. The model was undergone various structural, behavioural and policy tests. The utility and effectiveness of model was further explored through modelling a safety scenario. In order to create effective safety policy under resource constraint, DOE (Design of experiment) was used. DOE uses classic designs, namely, fractional factorials and central composite designs. It used to make second order regression equation which serve as an objective function. That function was optimized under budget constraint and optimum value used for safety policy which shown greatest improvement in overall PSM. The outcome of this research indicates that personnel safety management model has the capability for acting as instruction tool to improve understanding of safety management and also as an aid to policy making

  1. Design an optimum safety policy for personnel safety management - A system dynamic approach

    Energy Technology Data Exchange (ETDEWEB)

    Balaji, P. [The Glocal University, Mirzapur Pole, Delhi- Yamuntori Highway, Saharanpur 2470001 (India)

    2014-10-06

    Personnel safety management (PSM) ensures that employee's work conditions are healthy and safe by various proactive and reactive approaches. Nowadays it is a complex phenomenon because of increasing dynamic nature of organisations which results in an increase of accidents. An important part of accident prevention is to understand the existing system properly and make safety strategies for that system. System dynamics modelling appears to be an appropriate methodology to explore and make strategy for PSM. Many system dynamics models of industrial systems have been built entirely for specific host firms. This thesis illustrates an alternative approach. The generic system dynamics model of Personnel safety management was developed and tested in a host firm. The model was undergone various structural, behavioural and policy tests. The utility and effectiveness of model was further explored through modelling a safety scenario. In order to create effective safety policy under resource constraint, DOE (Design of experiment) was used. DOE uses classic designs, namely, fractional factorials and central composite designs. It used to make second order regression equation which serve as an objective function. That function was optimized under budget constraint and optimum value used for safety policy which shown greatest improvement in overall PSM. The outcome of this research indicates that personnel safety management model has the capability for acting as instruction tool to improve understanding of safety management and also as an aid to policy making.

  2. Design an optimum safety policy for personnel safety management - A system dynamic approach

    Science.gov (United States)

    Balaji, P.

    2014-10-01

    Personnel safety management (PSM) ensures that employee's work conditions are healthy and safe by various proactive and reactive approaches. Nowadays it is a complex phenomenon because of increasing dynamic nature of organisations which results in an increase of accidents. An important part of accident prevention is to understand the existing system properly and make safety strategies for that system. System dynamics modelling appears to be an appropriate methodology to explore and make strategy for PSM. Many system dynamics models of industrial systems have been built entirely for specific host firms. This thesis illustrates an alternative approach. The generic system dynamics model of Personnel safety management was developed and tested in a host firm. The model was undergone various structural, behavioural and policy tests. The utility and effectiveness of model was further explored through modelling a safety scenario. In order to create effective safety policy under resource constraint, DOE (Design of experiment) was used. DOE uses classic designs, namely, fractional factorials and central composite designs. It used to make second order regression equation which serve as an objective function. That function was optimized under budget constraint and optimum value used for safety policy which shown greatest improvement in overall PSM. The outcome of this research indicates that personnel safety management model has the capability for acting as instruction tool to improve understanding of safety management and also as an aid to policy making.

  3. Enhancing Teacher Utilization of Complex Instructional Systems.

    Science.gov (United States)

    Shore, Ann; Daniel, Dan

    This paper describes a research and development effort by Jostens Learning Corporation that resulted in the Renaissance Information Management System (RIMS), an information-management user interface for an integrated learning system that is designed to overcome two major obstacles to the use of computer systems by classroom teachers--limited…

  4. Guidelines for the Integration of Instructional Television in Speech and Hearing Facilities.

    Science.gov (United States)

    Borich, Gary D.

    To devise an efficient instructional television system, the planner must first identify and assess objectives for target audiences; allow for construction of a flexible, expansible system; plan for exchangeable instructional tapes; observe instructional procedures for large class, small group, and remote location operations; consider types of…

  5. Instructional Technology in Brazil: A Status Report

    Science.gov (United States)

    Saettler, Paul

    1973-01-01

    A status report on the evolving conceptions of instructional technology and current applications in Brazil. A complementary purpose is to summarize those conditions which vitally influence the general characteristics of the Brazilian educational system and the nature of instructional technology in this major developing country of the world.…

  6. Effect of Music-Integrated Instruction on First Graders' Reading Fluency

    Science.gov (United States)

    Bryant, Kerry G.

    2012-01-01

    The study examined music-integrated (MI) instruction, framed by automatic information processing theory and elements of prosody. A quasi-experimental, pre- and posttest design was utilized to ascertain the effect of MI instruction on reading fluency among first grade students. Subjects were students in two public elementary schools in Georgia. To…

  7. Shifting the paradigm of music instruction: Implications of embodiment stemming from an augmented reality guitar learning system

    Directory of Open Access Journals (Sweden)

    Joseph Roland Keebler

    2014-05-01

    Full Text Available Musical instruction often includes materials that can act as a barrier to learning. New technologies using augmented reality may aid in reducing the initial difficulties involved in learning music by lowering these barriers characteristic of traditional instructional materials. Therefore, this set of studies examined a novel augmented reality guitar learning system (i.e., the Fretlight® guitar in regards to current theories of embodied music cognition. Specifically, we examined the effects of using this system in comparison to a standard instructional material (i.e. diagrams. First, we review major theories related to musical embodiment and specify a niche within this research space we call embodied music technology for learning. Following, we explicate two parallel experiments that were conducted to address the learning effects of this system. Experiment 1 examined short-term learning effects within one experimental session, while Experiment 2 examined both short-term and long-term effects across two sessions spaced at a two-week interval. Analyses demonstrated that, for many of our dependent variables, all participants increased in performance across time. Further, the Fretlight® condition consistently led to significantly better outcomes via interactive effects, including significantly better long term retention for the learned information across a two week time interval. These results are discussed in the context of embodied cognition theory as it relates to music. Potential limitations and avenues for future research are described.

  8. A Case Study: Implementing an Interactive Video Instruction System in Teaching Electronics and Industrial Maintenance.

    Science.gov (United States)

    Shipe, Ron; And Others

    A study examined the development and implementation of an interactive video instruction system for teaching electronics and industrial maintenance at the University of Tennessee. The specific purposes of the study were to document unusual problems that may be encountered when this new technology is implemented, suggest corrective actions, and…

  9. Designing Learning Environments to Teach Interactive Quantum Physics

    Science.gov (United States)

    Puente, Sonia M. Gomez; Swagten, Henk J. M.

    2012-01-01

    This study aims at describing and analysing systematically an interactive learning environment designed to teach Quantum Physics, a second-year physics course. The instructional design of Quantum Physics is a combination of interactive lectures (using audience response systems), tutorials and self-study in unit blocks, carried out with small…

  10. MATH INSTRUCTIONAL MEDIA DESIGN USING COMPUTER FOR COMPLETION OF TWO-VARIABLES LINEAR EQUATION SYSTEM BY ELIMINATION METHOD

    Directory of Open Access Journals (Sweden)

    Nurbaiti

    2017-03-01

    Full Text Available Science and technology have been rapidly evolved in some fields of knowledge, including mathematics. Such development can contribute to improvements on the learning process that encourage students and teachers to enhance their abilities and performances. In delivering the material on the linear equation system with two variables (SPLDV, the conventional teaching method where teachers become the center of the learning process is still well-practiced. This method would cause the students get bored and have difficulties to understand the concepts they are learning. Therefore, in order to the learning of SPLDV easy, an interesting, interactive media that the students and teachers can apply is necessary. This media is designed using GUI MATLAB and named as students’ electronic worksheets (e-LKS. This program is intended to help students in finding and understanding the SPLDV concepts more easily. This program is also expected to improve students’ motivation and creativity in learning the material. Based on the test using the System Usability Scale (SUS, the design of interactive mathematics learning media of the linear equation system with Two Variables (SPLDV gets grade B (excellent, meaning that this learning media is proper to be used for Junior High School students of grade VIII.

  11. Getting to the point: attempting to improve juror comprehension of capital penalty phase instructions.

    Science.gov (United States)

    Smith, Amy E; Haney, Craig

    2011-10-01

    This research examined the effects of several versions of capital penalty phase instructions on juror comprehension. Study One documented the impact of California's recently implemented "plain language" instruction. It showed that although the new instruction has clear advantages over the previous version, significant comprehension problems remain. Study Two evaluated several modified instructions designed to enhance comprehension. Participants heard either a standard patterned instruction or one of two alternatives-a psycholinguistically improved instruction, or a "pinpoint" instruction using case-related facts to illustrate key terms-in a simulated death penalty sentencing phase. Persons who heard modified instructions demonstrated higher levels of comprehension on virtually every measure as compared to those in the standard instruction condition.

  12. Instruction understanding for intelligent robots in nuclear facilities

    International Nuclear Information System (INIS)

    Kambayashi, Shaw; Abe, Yasuaki

    1993-01-01

    As a first step to realize an autonomous mobile robot for plant maintenance, where the robot is capable to understand instructions written in natural languages, we have developed a prototype of instruction understanding system which makes the robot construct its motion sequences to approach instrumentations and inspect them from input sentences written in Japanese. In the prototype system, the instruction understanding and planning capabilities are integrated by an inference engine which consists of a cyclic operation of three processings, i.e., sensing, decision, and execution. Based on environmental data and current states of the robot, a proper process such as natural language processing is triggered by the decision part of the inference engine to accomplish the input instructions. The multiple- and dynamic-planning capabilities, which are necessary to cope with dynamic changes of environments surrounding the robot, are achieved by utilizing the cyclic inference engine together with a set of the inference packets which keep intermediate results of natural language processing and planning for respective input instructions. (orig.)

  13. Design of Processors with Reconfigurable Microarchitecture

    Directory of Open Access Journals (Sweden)

    Andrey Mokhov

    2014-01-01

    Full Text Available Energy becomes a dominating factor for a wide spectrum of computations: from intensive data processing in “big data” companies resulting in large electricity bills, to infrastructure monitoring with wireless sensors relying on energy harvesting. In this context it is essential for a computation system to be adaptable to the power supply and the service demand, which often vary dramatically during runtime. In this paper we present an approach to building processors with reconfigurable microarchitecture capable of changing the way they fetch and execute instructions depending on energy availability and application requirements. We show how to use Conditional Partial Order Graphs to formally specify the microarchitecture of such a processor, explore the design possibilities for its instruction set, and synthesise the instruction decoder using correct-by-construction techniques. The paper is focused on the design methodology, which is evaluated by implementing a power-proportional version of Intel 8051 microprocessor.

  14. Exploring Customization in Higher Education: An Experiment in Leveraging Computer Spreadsheet Technology to Deliver Highly Individualized Online Instruction to Undergraduate Business Students

    Science.gov (United States)

    Kunzler, Jayson S.

    2012-01-01

    This dissertation describes a research study designed to explore whether customization of online instruction results in improved learning in a college business statistics course. The study involved utilizing computer spreadsheet technology to develop an intelligent tutoring system (ITS) designed to: a) collect and monitor individual real-time…

  15. Automatically fused instructions : algorithms for the customization of the instruction, set of a recon?gurable architecture

    NARCIS (Netherlands)

    Galuzzi, C.

    2009-01-01

    In this dissertation, we address the design of algorithms for the automatic identi?cation and selection of complex application-speci?c instructions used to speed up the execution of applications on recon?gurable architectures. The computationally intensive portions of an application are analyzed and

  16. Comparing problem-based learning and lecture as methods to teach whole-systems design to engineering students

    Science.gov (United States)

    Dukes, Michael Dickey

    The objective of this research is to compare problem-based learning and lecture as methods to teach whole-systems design to engineering students. A case study, Appendix A, exemplifying successful whole-systems design was developed and written by the author in partnership with the Rocky Mountain Institute. Concepts to be tested were then determined, and a questionnaire was developed to test students' preconceptions. A control group of students was taught using traditional lecture methods, and a sample group of students was taught using problem-based learning methods. After several weeks, the students were given the same questionnaire as prior to the instruction, and the data was analyzed to determine if the teaching methods were effective in correcting misconceptions. A statistically significant change in the students' preconceptions was observed in both groups on the topic of cost related to the design process. There was no statistically significant change in the students' preconceptions concerning the design process, technical ability within five years, and the possibility of drastic efficiency gains with current technologies. However, the results were inconclusive in determining that problem-based learning is more effective than lecture as a method for teaching the concept of whole-systems design, or vice versa.

  17. An Investigation of the Fundamental Characteristics in Quality Online Spanish Instruction

    Science.gov (United States)

    Don, Margaret Rose

    2005-01-01

    This article presents research findings investigating the fundamental characteristics in online Spanish instruction (at the university level in the United States) designed to maximize learning outcomes. The researcher collected data to develop a rubric of the fundamental characteristic in online Spanish instruction and then to determine whether…

  18. KEEFEKTIFAN PEMBELAJARAN MODEL DESIGNED STUDENT-CENTERED INSTRUCTIONAL TERHADAP KEMAMPUAN REPRESENTASI PESERTA DIDIK

    Directory of Open Access Journals (Sweden)

    Ajeng Alisa Narulita

    2013-11-01

    Full Text Available Tujuan dari penelitian ini adalah untuk mengetahui (1 apakah kemampuan representasi matematika peserta didik kelas VIII yang diberi pembelajaran dengan model Designed Student-Centered Instructional (DSCI pada mencapai ketuntasan belajar atau tidakdan (2 apakah kemampuan representasi matematika peserta didik kelas VIII yang diberi pembelajaran dengan model DSCI lebih baik dibandingkan dengan pembelajaran dengan model ekspositori. Hal tersebut yang akan menentukan apakah model DSCI efektif digunakan dalam meningkatkan kemampuan representasi matematika atau tidak.Penelitian ini merupakan penelitian eksperimen dengan populasi seluruh peserta didik kelas VIII SMP Negeri 3 Cilacap tahun ajaran 2012/2013. Sampel diambil secara acak melalui teknik area (cluster sampling sehingga diperoleh kelas VIII A sebagai kelompok eksperimen dan dan kelas VIII B sebagai kelompok kontrol. Setelah dilakukan penelitian diperoleh simpulan bahwa (1 rata-rata kemampuan representasi peserta didik kelas VIII yang diberi pembelajaran dengan model DSCI mencapai ketuntasan belajar dan (2 rata-rata kemampuan representasi peserta didik kelas VIII yang diberi pembelajaran dengan model DSCI lebih baik dibandingkan dengan pembelajaran dengan model ekspositori.

  19. The study of Kruskal's and Prim's algorithms on the Multiple Instruction and Single Data stream computer system

    Directory of Open Access Journals (Sweden)

    A. Yu. Popov

    2015-01-01

    Full Text Available Bauman Moscow State Technical University is implementing a project to develop operating principles of computer system having radically new architecture. A developed working model of the system allowed us to evaluate an efficiency of developed hardware and software. The experimental results presented in previous studies, as well as the analysis of operating principles of new computer system permit to draw conclusions regarding its efficiency in solving discrete optimization problems related to processing of sets.The new architecture is based on a direct hardware support of operations of discrete mathematics, which is reflected in using the special facilities for processing of sets and data structures. Within the framework of the project a special device was designed, i.e. a structure processor (SP, which improved the performance, without limiting the scope of applications of such a computer system.The previous works presented the basic principles of the computational process organization in MISD (Multiple Instructions, Single Data system, showed the structure and features of the structure processor and the general principles to solve discrete optimization problems on graphs.This paper examines two search algorithms of the minimum spanning tree, namely Kruskal's and Prim's algorithms. It studies the implementations of algorithms for two SP operation modes: coprocessor mode and MISD one. The paper presents results of experimental comparison of MISD system performance in coprocessor mode with mainframes.

  20. A Qualitative Study of the Job Challenges of Instructional Deans in the Technical College System of Georgia

    Science.gov (United States)

    Alford, Perrin J.

    2014-01-01

    The Technical College System of Georgia serves the people and the state by creating a system of technical education whose purpose is to use the latest technology and easy access for all adult Georgians and corporate citizens. Within each technical college is a hierarchy of faculty, staff, and administrators. The instructional deans serve a vital…