WorldWideScience

Sample records for instruction designed specifically

  1. Design Approach and Implementation of Application Specific Instruction Set Processor for SHA-3 BLAKE Algorithm

    Science.gov (United States)

    Zhang, Yuli; Han, Jun; Weng, Xinqian; He, Zhongzhu; Zeng, Xiaoyang

    This paper presents an Application Specific Instruction-set Processor (ASIP) for the SHA-3 BLAKE algorithm family by instruction set extensions (ISE) from an RISC (reduced instruction set computer) processor. With a design space exploration for this ASIP to increase the performance and reduce the area cost, we accomplish an efficient hardware and software implementation of BLAKE algorithm. The special instructions and their well-matched hardware function unit improve the calculation of the key section of the algorithm, namely G-functions. Also, relaxing the time constraint of the special function unit can decrease its hardware cost, while keeping the high data throughput of the processor. Evaluation results reveal the ASIP achieves 335Mbps and 176Mbps for BLAKE-256 and BLAKE-512. The extra area cost is only 8.06k equivalent gates. The proposed ASIP outperforms several software approaches on various platforms in cycle per byte. In fact, both high throughput and low hardware cost achieved by this programmable processor are comparable to that of ASIC implementations.

  2. OBE EAP-EOP Model: A Proposed Instructional Design in English for Specific Purposes

    Science.gov (United States)

    Hernandez, Hjalmar Punla

    2016-01-01

    Outcome-Based Education (OBE) demands innovative Instructional Designs (ID) in the 21st century. Being a descriptive-qualitative research, this paper aimed to (1) identify the ID used in the English language curricula of a private tertiary level institution in the Southern Luzon, Philippines, (2) determined the elements that the ID of the English…

  3. Designing Instructional Materials: Some Guidelines.

    Science.gov (United States)

    Burbank, Lucille; Pett, Dennis

    Guidelines for the design of instructional materials are outlined in this paper. The principles of design are presented in five major categories: (1) general design (structural appeal and personal appeal); (2) instructional design (attention, memory, concept learning, and attitude change); (3) visual design (media considerations, pictures, graphs…

  4. Intelligent Frameworks for Instructional Design.

    Science.gov (United States)

    Spector, J. Michael; And Others

    1992-01-01

    Presents a taxonomy describing various uses of artificial intelligence techniques in automated instructional development systems. Instructional systems development is discussed in relation to the design of computer-based instructional courseware; two systems being developed at the Air Force Armstrong Laboratory are reviewed; and further research…

  5. Instructional Style Meets Classroom Design.

    Science.gov (United States)

    Novelli, Joan

    1991-01-01

    Nine elementary teachers explain how they design their classrooms to match and support their instructional styles. The teachers focus on whole language programs, student portfolios, science activity set-ups, technology transformation, learning center strategies, and space utilization. (SM)

  6. Interior Design: Teacher's Instructional Guide.

    Science.gov (United States)

    Hays, Tricia

    This teacher's instructional guide, which is part of a family and consumer sciences education series focusing on a broad range of employment opportunities, is intended to assist teachers responsible for teaching one- and two-year interior design programs for Texas high school students. The following are among the items included: (1) introductory…

  7. Gestalt Theory and Instructional Design.

    Science.gov (United States)

    Moore, Patrick; Fitz, Chad

    1993-01-01

    Offers a brief overview of Gestalt theory. Shows how six Gestalt principles (proximity, closure, symmetry, figure-ground segregation, good continuation, and similarity) can be applied to improve a reader's comprehension of a badly designed instruction module that uses several graphics. (SR)

  8. Rapid Prototyping: An Alternative Instructional Design Strategy.

    Science.gov (United States)

    Tripp, Steven D.; Bichelmeyer, Barbara

    1990-01-01

    Discusses the nature of instructional design and describes rapid prototyping as a feasible model for instructional system design (ISD). The use of prototyping in software engineering is described, similarities between software design and instructional design are discussed, and an example is given which uses rapid prototyping in designing a…

  9. Toward Instructional Design Principles: Inducing Faraday's Law with Contrasting Cases

    Science.gov (United States)

    Kuo, Eric; Wieman, Carl E.

    2016-01-01

    Although physics education research (PER) has improved instructional practices, there are not agreed upon principles for designing effective instructional materials. Here, we illustrate how close comparison of instructional materials could support the development of such principles. Specifically, in discussion sections of a large, introductory…

  10. MVP and Instructional Systems Design in Online Courses

    Science.gov (United States)

    Franklin, Jennifer L.

    2017-01-01

    This chapter is based on three premises. The first premise is that the use of instructional systems design (ISD) methods is important in online as well as traditional classroom settings. A second premise is that improving the motivational design of instruction brings benefits to teachers and learners alike. The third premise, specific to this…

  11. Motivational Design in Information Literacy Instruction

    Science.gov (United States)

    Hess, Amanda Nichols

    2015-01-01

    Motivational design theory complements instructional design theory and, when used together, both principles can affect learning, knowledge acquisition, and knowledge retention. In information literacy instruction, motivational design exists throughout the appropriate standards documents. However, there is limited current research on the best…

  12. Formal education of curriculum and instructional designers

    NARCIS (Netherlands)

    McKenney, Susan; Visscher-Voerman, Irene

    2013-01-01

    McKenney, S., & Visscher-Voerman, I. (2013). Formal education of curriculum and instructional designers. Educational Designer, 2(6). Available online: http://www.educationaldesigner.org/ed/volume2/issue6/article20/index.htm

  13. A Content Analysis of Instructional Design and Web Design Books: Implications for Inclusion of Web Design in Instructional Design Textbooks

    Science.gov (United States)

    Obilade, Titilola T.; Burton, John K.

    2015-01-01

    This textual content analysis set out to determine the extent to which the theories, principles, and guidelines in 4 standard books of instructional design and technology were also addressed in 4 popular books on web design. The standard books on instructional design and the popular books on web design were chosen by experts in the fields. The…

  14. When innovative instructional designs are too innovative

    DEFF Research Database (Denmark)

    Kjærgaard, Thomas; Wahl, Christian

    2015-01-01

    and it was developed to include, motivate and encourage the students to engage in more situated learning processes. The course is infamous for low attendance and for demotivating the students. The new instructional design utilized teacher-produced video-clips to qualify the students learning in the preparation...... for the lessons and new pedagogical activities during lessons to make the learning process more situated. The video-clips should also include more students through scaffolding the academic reading with video-clips. However, the outcome was not as planned. The students didn’t recognize the video......This paper presents a study of what happens when innovation of an instructional design is too innovative. The study investigates an implementation process of a new instructional design in nursing education. The new instructional design should be a step away for a functionalist approach to learning...

  15. Flexible learning and the design of instruction

    NARCIS (Netherlands)

    Collis, Betty; Nikolova, Iliana

    1998-01-01

    The paper deals with the problem of designing flexible learning and instruction. Flexibility is considered both from the learner's and the designer's perspective. The potential of telematics in the design, development and implementation of flexible and distance learning is discussed. A Method for

  16. Formal education of curriculum and instructional designers

    NARCIS (Netherlands)

    McKenney, Susan; Visscher-Voerman, Irene

    2013-01-01

    In practice, few researchers and designers have strong conceptual understanding of the marriage between the design discipline and scientific research traditions. Rather, most have strong exposure to either research methodologies or instructional design methods, theories and/or practices. Within the

  17. Instructional Design as Manipulation of, or Cooperation with, Learners?

    Science.gov (United States)

    Matthews, Michael T.; Yanchar, Stephen C.

    2018-01-01

    We present a qualitative study of the tension between manipulative and cooperative approaches to instructional design. We found that our participants struggled to resist manipulative tendencies in their work contexts. More specifically, our findings suggest that our participants sought to design with their learners in mind to foster a more…

  18. Librarians and Instructional Designers: Collaboration and Innovation

    Science.gov (United States)

    Eshleman, Joe; Moniz, Richard; Mann, Karen; Eshleman, Kristen

    2016-01-01

    With online education options more ubiquitous and sophisticated than ever, the need for academic librarians to be conversant with digital resources and design thinking has become increasingly important. The way forward is through collaboration with instructional designers, which allows librarians to gain a better understanding of digital resource…

  19. Impact of Instructional Design on Virtual Teamwork

    Science.gov (United States)

    Rawlings, Melody

    2012-01-01

    The purpose of this participatory action research study was to answer the following research question: How does online instructional design impact students' virtual teamwork performance? Through the lens of social constructivism, a qualitative, in-depth multi-case study design was utilized to conduct document analyses, observations, and student…

  20. Universal Design for Instruction: Extending the Universal Design Paradigm to College Instruction

    Science.gov (United States)

    McGuire, Joan M.; Scott, Sally S.

    2006-01-01

    Universal design for instruction (UDI) represents the systematic application of universal design, the construct from architecture and product development, to instructional practices in higher education. In addition to a description of the deliberative process by which UDI was developed, this article provides confirmatory evidence of the validity…

  1. Demonstrating Empathy: A Phenomenological Study of Instructional Designers Making Instructional Strategy Decisions for Adult Learners

    Science.gov (United States)

    Vann, Linda S.

    2017-01-01

    Instructional designers are tasked with making instructional strategy decisions to facilitate achievement of learning outcomes as part of their professional responsibilities. While the instructional design process includes learner analysis, that analysis alone does not embody opportunities to assist instructional designers with demonstrations of…

  2. Motivational Strategies for Instructional Design.

    Science.gov (United States)

    1982-09-24

    ese concepts explains an aspect of .45 the effect of personal expectancies on one’s own behavor . The concept of l f Z (Lefcourt, 1976; Roter, 1966...of studies have shown that extrinsic rewards are not as likely to decrease intrinsic interest if they are unexpected rather than expected ( Green ...Lepper, 1974; Lepper & Green , 1975; Lepper, Green , & Nisbctt, 1973), and in some cases, if they are noncontingent rather than being tied to a specific

  3. A Virtual Library for Instructional Systems Designers.

    Science.gov (United States)

    Kirk, James J.

    During the past three years, the role of the instructional systems designer has taken on greater significance for instructors. This is because many faculty members have been asked to put their entire courses online over the World Wide Web. Instructors are now creating a substantial percentage of the online courses with little or no background in…

  4. General Systems Theory and Instructional Design.

    Science.gov (United States)

    Salisbury, David F.

    The use of general systems theory in the field of instructional systems design (ISD) is explored in this paper. Drawing on work by Young, the writings of 12 representative ISD writers and researchers were surveyed to determine the use of 60 general systems theory concepts by the individual authors. The average number of concepts used by these…

  5. General Systems Theory and Instructional Systems Design.

    Science.gov (United States)

    Salisbury, David F.

    1990-01-01

    Describes basic concepts in the field of general systems theory (GST) and identifies commonalities that exist between GST and instructional systems design (ISD). Models and diagrams that depict system elements in ISD are presented, and two matrices that show how GST has been used in ISD literature are included. (11 references) (LRW)

  6. Designing Genetics Instruction for a Socratic Approach

    Science.gov (United States)

    Idros, Sharifah Norhaidah Syed

    2004-01-01

    Science is at heart a rational activity. Reasoning, being an important component of critical thinking has been successfully taught using Socratic methods. As an approach, the instructor or designer of instruction models an inquiring and probing mind focusing on providing questions and not answers. The main aim has been to allow learners to…

  7. Instructional Design: Its Relevance for CALL.

    Science.gov (United States)

    England, Elaine

    1989-01-01

    Describes an interdisciplinary (language and educational technology departments) instructional design program that is intended to develop back-up computer programs for students taking supplementary English as a second language classes. The program encompasses training programs, the psychology of screen reading, task analysis, and color cueing.…

  8. Rapid Prototyping in Instructional Design: Creating Competencies

    Science.gov (United States)

    Fulton, Carolyn D.

    2010-01-01

    Instructional designers working in rapid prototyping environments currently do not have a list of competencies that help to identify the knowledge, skills, and attitudes (KSAs) required in these workplaces. This qualitative case study used multiple cases in an attempt to identify rapid prototyping competencies required in a rapid prototyping…

  9. Redefining Classroom Culture through Instructional Design

    Science.gov (United States)

    Faryadi, Qais; Bakar, Zainab Abu; Maidinsah, Hamidah; Muhamad, Aminuddin

    2007-01-01

    This critical assessment attempts to define a good instructional design through the eyes and the minds of renowned scholars and the most outspoken educational psychologists such as Gagne, John Keller, Jerome Bruner, and Richard E. Mayer and so on. This examination also discusses ways in directing the mental map of students for better knowledge…

  10. Considerations for Designing Instructional Virtual Environments.

    Science.gov (United States)

    Dennen, Vanessa Paz; Branch, Robert C.

    Virtual reality is an immersive, interactive medium that manipulates the senses in order provide users with simulated experiences in computer-generated worlds. The visual design of virtual reality is an important issue, but literature has tended to stress the medium's instructional potential rather than setting forth a protocol for designing…

  11. Implementing Integrated Multicultural Instructional Design in Management Education

    Science.gov (United States)

    Schultz, Jennifer L.; Higbee, Jeanne L.

    2011-01-01

    This purpose of this paper is to summarize the principles of integrated multicultural instructional design (IMID; Higbee, Goff, & Schultz, in press; Higbee, Schultz, & Goff, 2010) and present specific strategies for incorporating IMID in management education. The primary goal of IMID is to promote the integration of multicultural content…

  12. Software Engineering Design Principles Applied to Instructional Design: What Can We Learn from Our Sister Discipline?

    Science.gov (United States)

    Adnan, Nor Hafizah; Ritzhaupt, Albert D.

    2018-01-01

    The failure of many instructional design initiatives is often attributed to poor instructional design. Current instructional design models do not provide much insight into design processes for creating e-learning instructional solutions. Given the similarities between the fields of instructional design and software engineering, instructional…

  13. Instructional design considerations promoting engineering design self-efficacy

    Science.gov (United States)

    Jackson, Andrew M.

    Engineering design activities are frequently included in technology and engineering classrooms. These activities provide an open-ended context for practicing critical thinking, problem solving, creativity, and innovation---collectively part of the 21st Century Skills which are increasingly needed for success in the workplace. Self-efficacy is a perceptual belief that impacts learning and behavior. It has been shown to directly impact each of these 21st Century Skills but its relation to engineering design is only recently being studied. The purpose of this study was to examine how instructional considerations made when implementing engineering design activities might affect student self-efficacy outcomes in a middle school engineering classroom. Student responses to two self-efficacy inventories related to design, the Engineering Design Self-Efficacy Instrument and Creative Thinking Self-Efficacy Inventory, were collected before and after participation in an engineering design curriculum. Students were also answered questions on specific factors of their experience during the curriculum which teachers may exhibit control over: teamwork and feedback. Results were analyzed using Pearson's correlation coefficients, paired and independent t-tests, and structural equation modeling to better understand patterns for self-efficacy beliefs in students. Results suggested that design self-efficacy and creative thinking self-efficacy are significantly correlated, r(1541) = .783, p classroom strategies for increasing self-efficacy and given specific recommendations related to teamwork and feedback to support students. Finally, although there were weaknesses in the study related to the survey administration, future research opportunities are presented which may build from this work.

  14. Universal Instructional Design Principles for Moodle

    Directory of Open Access Journals (Sweden)

    Tanya Elias

    2010-05-01

    Full Text Available The paper identifies a set of universal instructional design (UID principles appropriate to distance education (DE and tailored to the needs of instructional designers and instructors teaching online. These principles are then used to assess the accessibility level of a sample online course and the availability of options in its LMS platform (Moodle to increase course accessibility. Numerous accessibility-sensitive plug-in modules are found to be available to Moodle users, though relatively few features were included in the sample course analysed. This may be because they have not been made available to instructors at the institutional level. The paper offers a series of recommendations to improve the accessibility of online DE to learners with diverse abilities, disabilities, and needs.

  15. Designing Preclinical Instruction for Psychomotor Skills (III)--Instructional Engineering: Design Phase.

    Science.gov (United States)

    Guenzel, Pamela J.; And Others

    1995-01-01

    In the third of a series of articles on teaching psychomotor skills in dental education, the design of instructional materials is discussed. Steps include identifying appropriate teaching strategies for the tasks; organizing and sequencing subskills; identifying and collecting common errors; and drafting learning exercises for each subskill. (MSE)

  16. Designing Instructional Strategies which Facilitate Learning for Mastery.

    Science.gov (United States)

    Anderson, Lorin W.; Jones, Beau Fly

    The "state of the craft" of instruction within the context of the mastery learning model is discussed. Little has been said in the past about specific instructional strategies that are applicable to particular instructional units or objectives, or to the daily classroom life of teachers. This paper is organized into six major sections. The first…

  17. A Model for Designing Library Instruction for Distance Learning

    Science.gov (United States)

    Rand, Angela Doucet

    2013-01-01

    Providing library instruction in distance learning environments presents a unique set of challenges for instructional librarians. Innovations in computer-mediated communication and advances in cognitive science research provide the opportunity for designing library instruction that meets a variety of student information seeking needs. Using a…

  18. MOOCS AS NEW CONDITIONS FOR INSTRUCTIONAL DESIGN

    DEFF Research Database (Denmark)

    Buhl, Mie; Andreasen, Lars Birch; Karanam, Pushpanadham

    MOOCS AS NEW CONDITIONS FOR INSTRUCTIONAL DESIGN Prof. Karanam Pushpanadham (The Maharaja Sayajirao University of Baroda) Prof. Mie Buhl (Aalborg University) Associate Prof. Lars Birch Andreasen (Aalborg University) ABSTRACT Education at all levels can shape the world of tomorrow, equipping...... education and research institutions and a critical mass of skilled and educated people, no society can ensure genuine sustainable development (UNESCO, 1998). Information and Communication Technologies have entailed changes in the conditions for teaching and learning. New technologies do not in themselves....... With the large-scale development of massive open online courses, MOOCs, new questions have arisen in relation to the planning, organizing and carrying out of the teaching situation. The classical pedagogical questions of what? (content), how? (methods), why? (purpose), and who? (participants) have been...

  19. Design Specification and Verification

    DEFF Research Database (Denmark)

    Staunstrup, Jørgen

    1997-01-01

    This is chapter 7 in an edited book that presents a number of issues of fundamental importance for the design of integrated hardware software products such as embedded, communication, and multimedia systems. This book is the result of a series of Ph.D. courses on hardware/software co-design held...

  20. Reactor helium system, design specification, operation and handling

    International Nuclear Information System (INIS)

    Badrljica, R.

    1984-06-01

    Apart from detailed design specification of the helium cover gas system of the Ra reactor, this document includes description of the operating regime, instructions for manipulations in the system with the aim of achieving and maintaining stationary gas circulation [sr

  1. Designing Preclinical Instruction of Psychomotor Skills (IV)--Instructional Engineering: Evaluation Phase.

    Science.gov (United States)

    Guenzel, Pamela J.; And Others

    1995-01-01

    The fourth article in a four-part series on instructional design discusses evaluation of a psychomotor skills unit taught in preclinical dental education. Issues examined include piloting of instructional materials, analysis and revision of materials based on student performance, syllabus design and content, influence of faculty characteristics,…

  2. Dosimeter design specifications

    International Nuclear Information System (INIS)

    Anon.

    1981-01-01

    The combination dosimeter and security credential holder was developed as part of the effort involved to provide an automated readout and thermoluminescent dosimetry capability at Hanford. The holder is designed to accomodate the thermoluminescent dosimeter card, appropriate filters, the security credential and a snap type clip. The body of the holder is ABS plastic (acrylontrile-butadiene-styrene). The dosimeter holder and card is mold casted providing uniformity of construction

  3. When innovative instructional designs are too innovative: lack of schema

    DEFF Research Database (Denmark)

    Kjærgaard, Thomas; Wahl, Christian

    2015-01-01

    and it was developed to motivate and encourage the students to engage in more situated learning processes. The course is infamous for low attendance and for demotivating the students; hence the new instructional design should motivate students to attend the lessons and to participate. The new instructional design...

  4. Project Management in Instructional Design: ADDIE Is Not Enough

    Science.gov (United States)

    Van Rooij, Shahron Williams

    2010-01-01

    In the digital age, instructional designers must possess both a sound instructional design knowledge base and solid project management skills that will enable them to complete courseware projects on time, on budget and in conformance with client expectations. Project management skills include the ability to apply repeatable processes, along with…

  5. A Symbiosis between Instructional Systems Design and Project Management

    Science.gov (United States)

    Pan, Cheng-Chang

    2012-01-01

    This study is intended to explore a complementary relationship between instructional systems design (ISD) and project management in an attempt to build a plausible case for integrating project management as a distinct course in the core of the graduate instructional systems design programs. It is argued that ISD and project management should form…

  6. What Do Instructional Designers in Higher Education Really Do?

    Science.gov (United States)

    Kumar, Swapna; Ritzhaupt, Albert

    2017-01-01

    What do instructional designers in higher education really do? With the rise in online courses and programs in higher education, this question is especially important. We interviewed eight instructional designers from across the United States using a semi-structured interview protocol. The results were analyzed using the constant comparative…

  7. Preparing Instructional Designers for Game-Based Learning: Part 2

    Science.gov (United States)

    Hirumi, Atsusi; Appelman, Bob; Rieber, Lloyd; Van Eck, Richard

    2010-01-01

    As noted in part I of this article (published in "TechTrends 54"(3)), advances in technology continue to outpace research on the design and effectiveness of instructional (digital video) games. In general, instructional designers know little about game development, commercial video game developers know little about training, education and…

  8. The Need for Imagination and Creativity in Instructional Design

    Science.gov (United States)

    Gibson, Pat

    2013-01-01

    The purpose of this article is to explore the need for imagination and creativity in adult education instructional design both online and face-to-face. It defines both imagination and creativity as well as provides an overview of the history of instructional design. It provides an examination of imagination and its application in educational…

  9. Instructional Design as Knowledge Management: A Knowledge-in-Practice Approach to Choosing Instructional Methods

    Science.gov (United States)

    McIver, Derrick; Fitzsimmons, Stacey; Flanagan, David

    2016-01-01

    Decisions about instructional methods are becoming more complex, with options ranging from problem sets to experiential service-learning projects. However, instructors not trained in instructional design may make these important decisions based on convenience, comfort, or trends. Instead, this article draws on the knowledge management literature…

  10. Computer Assisted Instructional Design for Computer-Based Instruction. Final Report. Working Papers.

    Science.gov (United States)

    Russell, Daniel M.; Pirolli, Peter

    Recent advances in artificial intelligence and the cognitive sciences have made it possible to develop successful intelligent computer-aided instructional systems for technical and scientific training. In addition, computer-aided design (CAD) environments that support the rapid development of such computer-based instruction have also been recently…

  11. Universal Design for Instruction: The Paradigm, Its Principles, and Products for Enhancing Instructional Access

    Science.gov (United States)

    McGuire, Joan M.; Scott, Sally S.; Shaw, Stan F.

    2003-01-01

    Universal Design for Instruction (UDI), a construct that serves as the foundation for the work of a federally funded project at the University of Connecticut, offers an approach to inclusive instruction that is responsive to the diverse learning needs of a changing postsecondary population. In this article elements relating to the implementation…

  12. Using Critical Incidents of Instructional Design and Multimedia Production Activities to Investigate Instructional Designers' Current Practices and Roles

    Science.gov (United States)

    Sugar, William A.; Luterbach, Kenneth J.

    2016-01-01

    Through consideration of critical incidents, this study analyzed 106 effective, ineffective and extraordinary instructional design and multimedia production (MP) activities discussed by 36 instructional design professionals. This evaluation provided insights into these professionals' best and not so best practices during the past 6 months.…

  13. Using Agile Project Management to Enhance the Performance of Instructional Design Teams

    Science.gov (United States)

    Sweeney, David S.; Cifuentes, Lauren

    2010-01-01

    Instructional design models describe in detail methodologies for designing effective instruction. Several widely adopted models include suggestions for managing instructional design projects. However, these suggestions focus on how to manage the instructional design steps rather than the instructional design and development team process. The…

  14. The Value of the Operational Principle in Instructional Design

    Science.gov (United States)

    Gibbons, Andrew S.

    2009-01-01

    Formal design studies are increasing our insight into design processes, including those of instructional design. Lessons are being learned from other design fields, and new techniques and concepts can be imported as they are demonstrated effective. The purpose of this article is to introduce a design concept--the "operational principle"--for…

  15. Educating Instructional Designers: Different Methods for Different Outcomes.

    Science.gov (United States)

    Rowland, Gordon; And Others

    1994-01-01

    Suggests new methods of teaching instructional design based on literature reviews of other design fields including engineering, architecture, interior design, media design, and medicine. Methods discussed include public presentations, visiting experts, competitions, artifacts, case studies, design studios, and internships and apprenticeships.…

  16. Instructional psychology and the design of training simulators

    International Nuclear Information System (INIS)

    Stammers, R.B.

    1985-01-01

    In this paper the role of instructional psychology in simulator design and use is discussed. It is suggested that research and development work has tended to focus upon the face validity of simulators rather than their instructional utility. Dimensions of simulation are reviewed as are the variety of uses to which a simulator may be put. The nature of instructional psychology is briefly described under the following headings: task analysis, the acquisition of knowledge and skill and theories of instruction. Attention is also given to the potential role of computer-based training and the topic of retention of training is introduced. (author)

  17. How to use Gagne's model of instructional design in teaching psychomotor skills.

    Science.gov (United States)

    Khadjooi, Kayvan; Rostami, Kamran; Ishaq, Sauid

    2011-01-01

    Gagne's model of instructional design is based on the information processing model of the mental events that occur when adults are presented with various stimuli and focuses on the learning outcomes and how to arrange specific instructional events to achieve those outcomes. Applying Gagne's nine-step model is an excellent way to ensure an effective and systematic learning program as it gives structure to the lesson plans and a holistic view to the teaching. In this paper, we have chosen a routine practical procedure that junior doctors need to learn: insertion of a peritoneal (ascitic) drain and we use Gagne's "events of instruction" to design a lesson plan for this subject.

  18. Liberating Learning Object Design from the Learning Style of Student Instructional Designers

    Science.gov (United States)

    Akpinar, Yavuz

    2007-01-01

    Learning objects are a new form of learning resource, and the design of these digital environments has many facets. To investigate senior instructional design students' use of reflection tools in designing learning objects, a series of studies was conducted using the Reflective Action Instructional Design and Learning Object Review Instrument…

  19. Identifying Multimedia Production Competencies and Skills of Instructional Design and Technology Professionals: An Analysis of Recent Job Postings

    Science.gov (United States)

    Sugar, William; Hoard, Brent; Brown, Abbie; Daniels, Lee

    2012-01-01

    In an effort to document necessary multimedia production competencies of Instructional Design and Technology graduates, a recent analysis of over 7 months' worth of Instructional Design and Technology job advertisements (n = 615) were conducted. Specific job skills from these postings were categorized and analyzed. The data set includes three job…

  20. INSTRUCTIONAL SYSTEMS DESIGN (ISD: Theory and Practice in Second Life

    Directory of Open Access Journals (Sweden)

    Nil GOKSEL CANBEK

    2011-08-01

    Full Text Available The considerable changes in distance learning related technologies and Web 2.0 tools direct new immersive platforms to serve on the concept of avatar-driven interactions. In this sense, the immersive learning platforms, like Second Life (SL, embrace innovative forms of network based settings for effective community interactions. SL, as an interactive learning milieu, conducts 3D interactions and active education within the context of Instructional Systems Design (ISD which makes learning experiences efficient for both the tutor and learners on the platform designed on social networking. The platform gives an appropriate service to its users to be part of an instructional application of virtual worlds in where learners become connected though online activities. Within the learning theories existing nowadays, instructional designers, who are working in 3D environment like SL, are using mainly cognitive theory and constructivist strategy of learning. According to cognitive learning theory, people learn in different ways that are individually contextual and new trends in Instructional Design (ID had to address these differences. There are number of already approbated instructional models, which are used widely in the process of creation learning courses for 3D environments. The most frequently used model is ADDIE (Assess–Design–Develop–Implement– Evaluate, and the model PIE (Plan-Integrate–Evaluate, that is relatively new and become increasingly popular as it allows easy integration of technology in the classroom-oriented (virtual or real teaching. Based on the above mentioned concerns, this paper will examine the instructional design models used to create immersive courses within SL. Further, the paper will collect ideas on the instructional tools and technologies used for designing SL courses as these new technologies used in this environment draws heavily on andragogy. The paper will also clarify the obstacles on virtual learning

  1. Resisting Technological Gravity: Using Guiding Principles for Instructional Design

    Science.gov (United States)

    McDonald, Jason K.

    2010-01-01

    Instructional designers face tremendous pressure to abandon the essential characteristics of educational approaches, and settle instead for routine practices that do not preserve the level of quality those approaches originally expressed. Because this pressure can be strong enough to affect designers almost as gravity affects objects in the…

  2. A Waterfall Design Strategy for Using Social Media for Instruction

    Science.gov (United States)

    Ahern, Terence C.

    2016-01-01

    Using social media can create a rich learning environment that crosses all content areas. The key to creating this environment is for instructors and designers to match appropriate social media software with the intended learning outcome. This article describes an instructional design strategy that helps educators create learning activities that…

  3. Preparing Instructional Designers for Game-Based Learning: Part 1

    Science.gov (United States)

    Hirumi, Atsusi; Appelman, Bob; Rieber, Lloyd; Van Eck, Richard

    2010-01-01

    Like many rapidly growing industries, advances in video game technology are far outpacing research on its design and effectiveness. Relatively little is understood about how to apply what we know about teaching and learning to optimize game-based learning. For the most part, instructional designers know little about game development and video game…

  4. AN INSTRUCTIONAL DESIGN MODEL FOR BLENDED HIGHER EDUCATION

    Directory of Open Access Journals (Sweden)

    George Hack

    2016-07-01

    Full Text Available Instructional design models that are used by many higher education institutions to guide course design are insufficient for the unique opportunities of blended learning. Many established models are not practical tools for college faculty to use independently in the design of courses. Models like A.D.D.I.E., use a linear approach that can translate more easily into practical stages of course design, yet are historically rooted in the rapid prototyping of educational technologies or for designing military training and are inadequate for the complex demands of higher education, where learning outcomes are geared toward higher order thinking, scientific/clinical reasoning, and a syntheses of ideas into new knowledge. Presented here is an instructional design model that strategically incorporates the nuances of higher education, yet is practically framed to assist faculty with design challenges.

  5. Study of the 5E Instructional Model to Improve the Instructional Design Process of Novice Teachers

    Science.gov (United States)

    Hu, Jiuhua; Gao, Chong; Liu, Yang

    2017-01-01

    This study investigated the effects of 5E instructional model on the teaching processes of novice teachers. First, we conducted a teaching design training project based on the 5E model for 40 novice teachers, and compared pre-texts of the teachers' teaching process from before the training with post-texts obtained immediately following the…

  6. Principals' Perceptions of Instructional Leadership for Middle School Students of Color with Specific Learning Disabilities

    Science.gov (United States)

    Shannon-Luster, Beverly

    2013-01-01

    Instructional leadership is the most important responsibility for principals and the most vulnerable students in need of productive instructional leadership are students of color with specific learning disabilities. Instructional leaders are challenged with creating supportive learning environments and school cultures that promotes the education…

  7. Incorporating Kansei Engineering in Instructional Design: Designing Virtual Reality Based Learning Environments from a Novel Perspective

    Science.gov (United States)

    Chuah, Kee Man; Chen, Chwen Jen; Teh, Chee Siong

    2008-01-01

    In recent years, the application of virtual reality (VR) technology in education is rapidly gaining momentum. The educational benefits offered by such technology have prompted many educators as well as instructional designers to investigate ways to create effective and engaging VR learning. Instructional designers have examined widely the…

  8. Service-Learning Instructional Design Considerations

    Science.gov (United States)

    Maddrell, Jennifer

    2014-01-01

    This paper explores the design of "service-learning" experiences to engage college students in the real-world application of course subject matter. Service learning is an educational approach that combines community service, academic coursework, and work-based applied learning. Based on data gathered during a series of recent interviews…

  9. A Critical Review of Instructional Design Process of Distance Learning System

    Science.gov (United States)

    Chaudry, Muhammad Ajmal; ur-Rahman, Fazal

    2010-01-01

    Instructional design refers to planning, development, delivery and evaluation of instructional system. It is an applied field of study aiming at the application of descriptive research outcomes in regular instructional settings. The present study was designed to critically review the process of instructional design at Allama Iqbal Open University…

  10. Identifying Instructional Strategies Used to Design Mobile Learning in a Corporate Setting

    Science.gov (United States)

    Jackson-Butler, Uletta

    2016-01-01

    The purpose of this qualitative embedded multiple case study was to describe what instructional strategies corporate instructional designers were using to design mobile learning and to understand from their experiences which instructional strategies they believed enhance learning. Participants were five instructional designers who were actively…

  11. Issues in Software Engineering of Relevance to Instructional Design

    Science.gov (United States)

    Douglas, Ian

    2006-01-01

    Software engineering is popularly misconceived as being an upmarket term for programming. In a way, this is akin to characterizing instructional design as the process of creating PowerPoint slides. In both these areas, the construction of systems, whether they are learning or computer systems, is only one part of a systematic process. The most…

  12. The 5L Instructional Design For Exploring Legacies through Biography

    Science.gov (United States)

    Boulware, Beverly J.; Monroe, Eula E.; Wilcox, Bradley Ray

    2013-01-01

    People who have impacted generations have left legacies we can explore today through biographies. The 5L instructional design introduced in this article includes five components: Listen, Learn, Locate, Link, and Legacy. In the "Listen" section, teachers use storytelling and read-alouds to introduce individuals who shaped history. During…

  13. Instructional Design-Based Research on Problem Solving Strategies

    Science.gov (United States)

    Emre-Akdogan, Elçin; Argün, Ziya

    2016-01-01

    The main goal of this study is to find out the effect of the instructional design method on the enhancement of problem solving abilities of students. Teaching sessions were applied to ten students who are in 11th grade, to teach them problem solving strategies which are working backwards, finding pattern, adopting a different point of view,…

  14. Virtual Reality Hypermedia Design Frameworks for Science Instruction.

    Science.gov (United States)

    Maule, R. William; Oh, Byron; Check, Rosa

    This paper reports on a study that conceptualizes a research framework to aid software design and development for virtual reality (VR) computer applications for instruction in the sciences. The framework provides methodologies for the processing, collection, examination, classification, and presentation of multimedia information within hyperlinked…

  15. Instructional Design for the Future of Undergraduate Journalism Education

    Science.gov (United States)

    Farmer, Christopher J.

    2012-01-01

    In the face of communication changes brought on by technology, journalism curriculum needs restructuring while staying true to its core values. Using an instructional design framework, and a case study, this paper proposes a journalism education based on Esser's spheres of influence. Current practices and principles are discussed. A literature…

  16. Instructional Design and Project Management: Complementary or Divergent?

    Science.gov (United States)

    van Rooij, Shahron Williams

    2011-01-01

    This paper reports the results of a study to identify the extent to which organizations that develop educational/training products are committed to project management, as measured by their project management implementation maturity, as a methodology that is separate and distinct from the processes of instructional design. A Web survey was…

  17. Evaluating Online Dialogue on "Security" Using a Novel Instructional Design

    Science.gov (United States)

    Arora, Payal

    2008-01-01

    This paper explores evaluation strategies to gauge the impact of a novel instructional design on international community participation online. This is done by conceptualizing and devising indicators for measuring "engagement" online amongst marginalized adult communities worldwide. In doing so, a review of online evaluation literature is…

  18. What Should Instructional Designers Know about General Systems Theory?

    Science.gov (United States)

    Salisbury, David F.

    1989-01-01

    Describes basic concepts in the field of general systems theory (GST) and explains the relationship between instructional systems design (ISD) and GST. Benefits of integrating GST into the curriculum of ISD graduate programs are discussed, and a short bibliography on GST is included. (LRW)

  19. Designing Interactive Multimedia Instruction To Enable and Enhance Information Literacy.

    Science.gov (United States)

    Amidon, Leslie E.

    2001-01-01

    Addresses key strategies for the design and development of Interactive Multimedia Instruction (IMI) programs for adult learners, focusing on the removal of learning barriers and the incorporation of information literacy principles. Barriers include financial constraints, socio-economic and social class, communication skills, time constraints,…

  20. Designing Online Instruction for Postsecondary Students with Learning Disabilities

    Science.gov (United States)

    Simoncelli, Andrew; Hinson, Janice

    2010-01-01

    This research details the methodologies that could be used to better deliver online course content to students with learning disabilities. Research has shown how the design of the course affects the students' attitudes and performance. This article details the methodology and pedagogical side of the delivery including instructional methods that…

  1. Training in Japan: The Use of Instructional Systems Design.

    Science.gov (United States)

    Taguchi, Mina; Keller, John M.

    This study investigated the kinds of training conducted in Japanese companies and the degree to which instructional systems design (ISD) is implemented. A random sample of 12 Japanese companies in the banking, automobile manufacturing, electrical machinery, wholesale stores, insurance and securities, and transportation industries were surveyed; a…

  2. Instructional Design of a Programming Course

    DEFF Research Database (Denmark)

    Caspersen, Michael Edelgaard; Bennedsen, Jens

    2007-01-01

    We present a brief overview of a model for the human cognitive architecture and three learning theories based on this model: cognitive load theory, cognitive apprenticeship, and worked examples (a key area of cognitive skill acquisition). Based on this brief overview we argue how an introductory...... object-oriented programming course is designed according to results of cognitive science and educational psychology in general and cognitive load theory and cognitive skill acquisition in particular; the principal techniques applied are: worked examples, scaffolding, faded guidance, cognitive...

  3. Effects of instructions and cue subjectiveness on specificity of autobiographical memory recall

    Directory of Open Access Journals (Sweden)

    Jorge J. Ricarte-Trives

    2014-10-01

    Full Text Available The first aim of this study was to determine the power of instructions on the specificity of autobiographical memory as obtained with the Autobiographical Memory Test (AMT; Williams & Broadbent, 1986 and the efficacy of cue word criteria selection based on subjective parameters obtained with a standardized lexical program. Results showed a high power of specific instructions in its written version in contrast to non-directed memory recall to the same list of words three weeks later in a counterbalanced repeated measures within-subjects design. This effect was stronger when subjects previously were faced to the non-specific recovery task. Matched word lists using the "Buscapalabras" program (Davis & Perea, 2005 showed a very similar behaviour. These results point out that the same stimuli can be used repeatedly to obtain voluntary and involuntary retrieval with changes at instructional level. Additionally, standardized lexical programs can be employed to adapt cue-words of memory recall systems controlling for subjective differences related to language parameters (frequency, imageability and familiarity.

  4. The Teacher as Instructional Designer: A Search Through the Curriculum Maze.

    Science.gov (United States)

    Jacko, Carol M.; Garman, Noreen M.

    The vast amount of literature on curriculum and instructional design does not establish a clear frame of reference to help teachers utilize and operationalize concepts and information. Four specific problem areas are of special concern in the literature: (1) the terminology and definitions are confusing; (2) the place of the classroom teacher is…

  5. Instructional Design of Entrepreneurship Courses: Interview Research of Wyoming BRAVO! Entrepreneurs

    Science.gov (United States)

    Kolb, Belinda J.

    2010-01-01

    This qualitative study investigated the opportunity recognition process of Wyoming BRAVO! Entrepreneur (WBE) Award winners or nominees, in order to better inform the learner analysis and organizational strategy components of instructional design, specifically with respect to entrepreneurship courses. This study may be of significance to post…

  6. A Framework for Aligning Instructional Design Strategies with Affordances of CAVE Immersive Virtual Reality Systems

    Science.gov (United States)

    Ritz, Leah T.; Buss, Alan R.

    2016-01-01

    Increasing availability of immersive virtual reality (IVR) systems, such as the Cave Automatic Virtual Environment (CAVE) and head-mounted displays, for use in education contexts is providing new opportunities and challenges for instructional designers. By highlighting the affordances of IVR specific to the CAVE, the authors emphasize the…

  7. Inclusive college teaching: universal design for instruction and diverse learners

    Directory of Open Access Journals (Sweden)

    Joan M. McGuire

    2011-11-01

    Full Text Available Shifts in enrollment patterns are affecting college classrooms and elements of teaching ranging from options for delivering course materials online to multiple methods of assessing learning. With the enrollment of more diverse college learners comes a call to intentionally design instruction that is more inclusive and responsive to multiple learning styles. The notion of Universal Design for Instruction (UDI is examined from its roots in the architectural field to its application as a model for teaching that anticipates diversity including students with disabilities. Principles of UDI are defined, and pedagogical examples are provided. Several implementation projects based on the UDI concept are described as are preliminary results regarding outcomes. Substantive issues are identified that have bearing on the direction this innovative idea will take over the next several years.

  8. Instructional Design Thought Processes of Expert Nurse Educators

    OpenAIRE

    Gross, Monty Dale

    2006-01-01

    This study explores how expert nurse educators design instruction. Six female expert nurse educators volunteered to participate. Each participant had over ten years experience teaching, and all were recognized for their teaching excellence. They also had master's or doctoral degrees. Participants worked in small private schools, community colleges, or large public universities. The methodology was based in developmental research. Qualitative data sources included interviews, think-aloud proto...

  9. Design of the RISC-V Instruction Set Architecture

    OpenAIRE

    Waterman, Andrew Shell

    2016-01-01

    The hardware-software interface, embodied in the instruction set architecture (ISA), is arguably the most important interface in a computer system. Yet, in contrast to nearly all other interfaces in a modern computer system, all commercially popular ISAs are proprietary. A free and open ISA standard has the potential to increase innovation in microprocessor design, reduce computer system cost, and, as Moore’s law wanes, ease the transition to more specialized computational devices.In this d...

  10. Making Design Decisions Visible: Applying the Case-Based Method in Designing Online Instruction

    Directory of Open Access Journals (Sweden)

    Heng Luo,

    2011-01-01

    Full Text Available The instructional intervention in this design case is a self-directed online tutorial that applies the case-based method to teach educators how to design and conduct entrepreneurship programs for elementary school students. In this article, the authors describe the major decisions made in each phase of the design and development process, explicate the rationales behind them, and demonstrate their effect on the production of the tutorial. Based on such analysis, the guidelines for designing case-based online instruction are summarized for the design case.

  11. Investigating Peer Review as a Systemic Pedagogy for Developing the Design Knowledge, Skills, and Dispositions of Novice Instructional Design Students

    Science.gov (United States)

    Brill, Jennifer M.

    2016-01-01

    This research investigated peer review as a contemporary instructional pedagogy for fostering the design knowledge, skills, and dispositions of novice Instructional Design and Technology (IDT) professionals. Participants were graduate students enrolled in an introductory instructional design (ID) course. Survey, artifact, and observation data were…

  12. Investigating Instructional Design Management and Leadership Competencies--A Delphi Study

    Science.gov (United States)

    Gardner, Joel; Chongwony, Lewis; Washington, Tawana

    2018-01-01

    Research in instructional design and educational technology journals typically focuses on the theories, technologies, and processes related to practice of instructional design. There is little research emphasis, however, on leadership and management of instructional design in higher education. Investigating the competencies associated with…

  13. Would Having a Lead Instructional Designer Position Encourage Change in a K-12 Educational Setting?

    Science.gov (United States)

    Morris, John

    2011-01-01

    Adding the position Lead Instructional Designer (LID) will help an educational company or school district to work with principals and instructional designers to implement better instructional design strategies. This type of change creates more jobs and takes added pressure away from schools. The vision is to create better customer service to the…

  14. The Modified Delphi Method to Analyze the Application of Instructional Design Theory to Online Graduate Education

    Science.gov (United States)

    Zeedick, Danielle Marie

    2010-01-01

    During the past several decades, the field of instructional design theory has experienced changes in what is mostly applied to traditional, on-ground education. While instructional design theory has been (and still is being) discussed, constructed, and deconstructed, there has been no agreement among prominent instructional design theory…

  15. Writing and Rewriting the Instructional Design Case: A View from Two Sides

    Directory of Open Access Journals (Sweden)

    Craig D. Howard, Rodney Myers

    2011-01-01

    Full Text Available This article analyzes five problem areas educators grapple with when writing designs cases about learning interventions. The article is written from the vantage point of IJDL’s assistant editor who edited, reviewed, and coordinated the reviews of design cases over a period of two years while also writing his own design case (Howard & Myers, 2010: International Journal of Designs for Learning. The knowledge building genre of the instructional design case is viewed from the perspective of commonalities between articles published in a Tech Trends feature, the Instructional Design Portfolio, and this venue. The areas of concern common among reviews for these publications shed light on how the design case is developing into a rigorous form of educational inquiry. The areas of concern brought up in reviews of cases are discussed in light of the author’s first hand experiences of satisfying reviewers’ concerns and, in turn, coaching other educators through the process of a finalized design case. Those common areas are: (1 situating the design, (2 describing the design, (3 depicting the experience of the design, (4 developing trustworthiness through transparency, analysis, and reflection (5 removing aspects of design cases which confound their purpose. Specific examples from design cases that have gone through peer review describe how author-educators may approach the dissemination of design precedent through the careful documentation of pedagogical designs.

  16. Instructional Design Issues in a Distributed Collaborative Engineering Design (CED) Instructional Environment

    Science.gov (United States)

    Koszalka, Tiffany A.; Wu, Yiyan

    2010-01-01

    Changes in engineering practices have spawned changes in engineering education and prompted the use of distributed learning environments. A distributed collaborative engineering design (CED) course was designed to engage engineering students in learning about and solving engineering design problems. The CED incorporated an advanced interactive…

  17. Case-Based Instructional Practices: A Multiple-Case Study from Torts, Marketing, and Online Instructional Design Classes

    Science.gov (United States)

    Jung, Ji yoon

    2017-01-01

    The purpose of this study is to provide a comprehensive account on case-based instructional practices. Semester-long participant observation records in torts, marketing, and online instructional design classes, instructor interviews, course syllabi and teaching materials were used to describe the within-class complexity of the practices in terms…

  18. Design Studios in Instructional Design and Technology: What Are the Possibilities?

    Science.gov (United States)

    Knowlton, Dave S.

    2016-01-01

    Design studios are an innovative way to educate Instructional Design and Technology (IDT) students. This article begins by addressing literature about IDT design studios. One conclusion from this literature is that IDT studios have been theoretically conceptualized. However, much of this conceptualization is insular to the field of IDT and only…

  19. Applying Case-Based Method in Designing Self-Directed Online Instruction: A Formative Research Study

    Science.gov (United States)

    Luo, Heng; Koszalka, Tiffany A.; Arnone, Marilyn P.; Choi, Ikseon

    2018-01-01

    This study investigated the case-based method (CBM) instructional-design theory and its application in designing self-directed online instruction. The purpose of this study was to validate and refine the theory for a self-directed online instruction context. Guided by formative research methodology, this study first developed an online tutorial…

  20. Monkeys on the Screen?: Multicultural Issues in Instructional Message Design

    Directory of Open Access Journals (Sweden)

    Debbie McAnany

    2009-09-01

    Full Text Available With the shift in numbers between Canadian-born students in the university classroom and the increased number of international students, it is a primary concern for instructors and instructional designers to know and understand learner characteristics in order to create effective instructional messages and materials. Recognizing how culture might shape cognition and learning, we can value and design for the diversity of students and maximize their learning while improving the learning environment for all students. To celebrate cultural diversity and meet the challenges associated with designing for diverse learning styles and educational experiences, this paper offers a review of the literature and proposes a systematic three-fold approach to the creation and evaluation of multicultural instructional messages and materials: first, “Do no harm”; second, “Know your learner”; and third, “Incorporate global concepts and images into instructional messages.” Résumé Avec le renversement des proportions d’étudiants nés au Canada et d’étudiants internationaux qui sont de plus en plus nombreux dans nos universités, connaître et comprendre les caractéristiques des apprenants constitue maintenant une préoccupation majeure pour les instructeurs et les concepteurs pédagogiques afin de créer des messages et du matériel pédagogiques efficaces. En prenant en considération la façon dont la culture peut influencer la cognition et l’apprentissage, nous pouvons tenir compte de la diversité des étudiants lors de la conception et ainsi maximiser leur apprentissage tout en améliorant l’environnement d’apprentissage pour tous les étudiants. Dans le but de célébrer la diversité culturelle tout en relevant les défis associés à la conception pour divers styles d’apprentissage et d’expériences éducatives, le présent article présente un examen de la documentation et propose une approche systématique en trois volets pour

  1. Screen Design Guidelines for Motivation in Interactive Multimedia Instruction: A Survey and Framework for Designers.

    Science.gov (United States)

    Lee, Sung Heum; Boling, Elizabeth

    1999-01-01

    Identifies guidelines from the literature relating to screen design and design of interactive instructional materials. Describes two types of guidelines--those aimed at enhancing motivation and those aimed at preventing loss of motivation--for typography, graphics, color, and animation and audio. Proposes a framework for considering motivation in…

  2. Towards a theory of product design specifications

    DEFF Research Database (Denmark)

    Hansen, Claus Thorp; Andreasen, Mogens Myrup

    2004-01-01

    , which express the customers¿ need and perception of value. In this paper we will scrutinize this assumption. We outline the roles and tasks of the product design specification in order to identify the requirements on a theory of product design specifications and we identify existing theory elements....... In the design methodology literature we find guidelines and methods to compile a product design specification. The contributions are based on the common underlying assumption that it is meaningful and the only feasible approach to interpret the result of a need analysis into a set of technical specifications...... to build such a theory of product design specifications upon....

  3. OER Usage by Instructional Designers and Training Managers in Corporations

    Directory of Open Access Journals (Sweden)

    Anat Cohen

    2015-12-01

    Full Text Available Since the development of Open Educational Resources (OERs, different models regarding the usage of these resources in education have appeared in the literature. Wiley’s 4-Rs model is considered to be one of the leading models. Research based on Wiley’s model shows that using materials without making changes is the most common use. Compared to the extensive literature regarding OER usage in education, the literature barely deals with OER usage by instructional designers or training managers in corporations. The purpose of this research is to examine the OER usage of these two stakeholders, distinguishing between Little and Big OER repositories, in which Little OER repositories such as YouTube and Wikipedia aren’t necessarily designed to fulfill educational purposes. Findings show that these stakeholders almost use only Little repositories and that their usage level is higher than what is documented in the literature: they mostly Revise–modify the form of the resource, and Remix–combine different resources to create new ones. These differences can be explained by the fact that materials from Little OER repositories are raw materials, requiring further editing and adjustment. Significant differences between instructional designers’ and training managers’ usage of OERs were found regarding the Reuse level of resources from internal repositories and the Google Images repository, and the frequency of this Reuse.

  4. Authenticity in the process of learning about Instructional Design

    Directory of Open Access Journals (Sweden)

    Jay R. Wilson

    2010-05-01

    Full Text Available Authentic learning is touted as a powerful learning approach, particularly in the context of problem-based learning (Savery, 2006. Teaching and learning in the area of instructional design appears to offer a strong fit between the tenets of authentic learning and the practice of instructional design. This paper details the efforts to broaden and deepen the understanding of instructional design through a service learning approach to teaching, emphasizing authentic learning and assessment. Students are teamed and assigned to an actual contract with an external client under the supervision of the instructor who acts as project manager for the group. Contracts are negotiated to deliberately offer instructional design services to clients who would not otherwise be able to afford them, such as community-based non-profit groups. The reasons are two fold: first, we want to avoid competing for contracts that would interfere with the business of commercial instructional design groups and contractors; second, we want to impress on our students the idea that instructional design has social importance beyond the profit/loss and cost/effectiveness orientation of many instructional design businesses. In this way, we promote the idea that instructional designers are agents of social change, and their influence crosses interpersonal, professional, institutional and societal dimensions of change (Schwier, Campbell and Kenny, 2007.  Résumé : L’apprentissage authentique est présenté comme une approche efficace en apprentissage, en particulier dans le contexte de l’apprentissage par problèmes (Savery, 2006. Enseigner et apprendre la conception pédagogique semble offrir une correspondance étroite entre les principes de l’apprentissage authentique et la pratique de la conception pédagogique. Cet article présente de manière détaillée les efforts visant à élargir et à approfondir la compréhension qu’ont les étudiants de la conception p

  5. Specifications in early conceptual design work

    DEFF Research Database (Denmark)

    Hansen, Claus Thorp; Andreasen, Mogens Myrup

    2007-01-01

    In early conceptual design the design team is working in an uncertain situation, where the understanding of a need is limited and not much is known about the solution space. In this situation the design team has to both analyse need and explore solution space. Thus, the team has to formulate design...... specifications, which express attractive product goals, and has to synthesise the product idea. The authors of this paper see a challenge to enhance and improve our understanding of the nature of design specifications as a means to support the synthesis of a product idea. In this empirical study we analyse...... the structure and content of design specifications during early ideation activities, where initial design specifications are formulated and a product idea is synthesised. We have analysed specification documents of 19 teams of novice designers. Our analysis indicates that a productive product design...

  6. Instructional Design for Accelerated Macrocognitive Expertise in the Baseball Workplace

    Directory of Open Access Journals (Sweden)

    Peter J. Fadde

    2016-03-01

    Full Text Available The goal of accelerating expertise can leave researchers and trainers in human factors, naturalistic decision making, sport science, and expertise studies concerned about seemingly insufficient application of expert performance theories, findings and methods for training macrocognitive aspects of human performance. Video-occlusion methods perfected by sports expertise researchers have great instructional utility, in some cases offering an effective and inexpensive alternative to high-fidelity simulation. A key problem for instructional designers seems to be that expertise research done in laboratory and field settings doesn’t get adequately translated into workplace training. Therefore, this article presents a framework for better linkage of expertise research/training across laboratory, field, and workplace settings. It also uses a case study to trace the development and implementation of a macrocognitive training program in the very challenging workplace of the baseball batters’ box. This training, which was embedded for a full season in a college baseball team, targeted the perceptual-cognitive skill of pitch recognition that allows expert batters to circumvent limitations of human reaction time in order to hit a 90 mile-per-hour slider. While baseball batting has few analogous skills outside of sports, the instructional design principles of the training program developed to improve batting have wider applicability and implications. Its core operational principle, supported by information processing models but challenged by ecological models, decouples the perception-action link for targeted part-task training of the perception component, in much the same way that motor components routinely are isolated to leverage instructional efficiencies. After targeted perceptual training, perception and action were recoupled via transfer-appropriate tasks inspired by in situ research tasks. Using NCAA published statistics as performance measures

  7. Instructional Design for Accelerated Macrocognitive Expertise in the Baseball Workplace.

    Science.gov (United States)

    Fadde, Peter J

    2016-01-01

    The goal of accelerating expertise can leave researchers and trainers in human factors, naturalistic decision making, sport science, and expertise studies concerned about seemingly insufficient application of expert performance theories, findings and methods for training macrocognitive aspects of human performance. Video-occlusion methods perfected by sports expertise researchers have great instructional utility, in some cases offering an effective and inexpensive alternative to high-fidelity simulation. A key problem for instructional designers seems to be that expertise research done in laboratory and field settings doesn't get adequately translated into workplace training. Therefore, this article presents a framework for better linkage of expertise research/training across laboratory, field, and workplace settings. It also uses a case study to trace the development and implementation of a macrocognitive training program in the very challenging workplace of the baseball batters' box. This training, which was embedded for a full season in a college baseball team, targeted the perceptual-cognitive skill of pitch recognition that allows expert batters to circumvent limitations of human reaction time in order to hit a 90 mile-per-hour slider. While baseball batting has few analogous skills outside of sports, the instructional design principles of the training program developed to improve batting have wider applicability and implications. Its core operational principle, supported by information processing models but challenged by ecological models, decouples the perception-action link for targeted part-task training of the perception component, in much the same way that motor components routinely are isolated to leverage instructional efficiencies. After targeted perceptual training, perception and action were recoupled via transfer-appropriate tasks inspired by in situ research tasks. Using NCAA published statistics as performance measures, the cooperating team

  8. Teaching for physical literacy: Implications to instructional design and PETE

    Directory of Open Access Journals (Sweden)

    Stephen Silverman

    2015-06-01

    Full Text Available Physical education teachers play an important role in helping students' development of the motor skills needed to be physically literate individuals. Research suggests that teacher made instructional design decisions can lead to enhanced motor skill learning. After presenting a model of evidence-based research this paper presents information that will help teachers plan and execute lessons designed to improve students' motor skills. Variables that impact motor skill learning in physical education including time, type of practice, content, presentation and organizational strategies, and student skill level are presented and discussed. A brief section on student attitudes, their relation to motor skill learning and to physical literacy is included. Motor skills are needed for physically literate people to enjoy lifelong physical activity. Physical education teachers and the decisions they make contribute to students' learning and whether the goal of physical literacy is met.

  9. Site-specific waste management instruction - 200-ZP-1 pump-and-treat system

    International Nuclear Information System (INIS)

    Hopkins, G.G.

    1997-01-01

    This Site-Specific Waste Management Instruction (SSWMI) provides guidance for managing waste generated from operation of the 200-ZP-1 Pump-and-Treat (P and T) System, located just north of the Plutonium Finishing Plant in the 200 West Area. The construction and implementation of the 200-ZP-1 P and T System are an integral part of the 200-ZP-1 interim remedial measure activities. The goal of the interim remedial measure activities is to reduce further migration of carbon tetrachloride (CCl 4 ), chloroform, and trichloroethylene (TCE) in the groundwater of the 200 West Area. The P and T system is designed to initiate hydraulic containment of the contaminant mass in the high-concentration portion of the CCl 4 plume. The P and T contaminant removal mechanism consists of a combination of air stripping and vapor-phase granular activated carbon (GAC) adsorption technologies

  10. Learning physics: A comparative analysis between instructional design methods

    Science.gov (United States)

    Mathew, Easow

    The purpose of this research was to determine if there were differences in academic performance between students who participated in traditional versus collaborative problem-based learning (PBL) instructional design approaches to physics curricula. This study utilized a quantitative quasi-experimental design methodology to determine the significance of differences in pre- and posttest introductory physics exam performance between students who participated in traditional (i.e., control group) versus collaborative problem solving (PBL) instructional design (i.e., experimental group) approaches to physics curricula over a college semester in 2008. There were 42 student participants (N = 42) enrolled in an introductory physics course at the research site in the Spring 2008 semester who agreed to participate in this study after reading and signing informed consent documents. A total of 22 participants were assigned to the experimental group (n = 22) who participated in a PBL based teaching methodology along with traditional lecture methods. The other 20 students were assigned to the control group (n = 20) who participated in the traditional lecture teaching methodology. Both the courses were taught by experienced professors who have qualifications at the doctoral level. The results indicated statistically significant differences (p traditional (i.e., lower physics posttest scores and lower differences between pre- and posttest scores) versus collaborative (i.e., higher physics posttest scores, and higher differences between pre- and posttest scores) instructional design approaches to physics curricula. Despite some slight differences in control group and experimental group demographic characteristics (gender, ethnicity, and age) there were statistically significant (p = .04) differences between female average academic improvement which was much higher than male average academic improvement (˜63%) in the control group which may indicate that traditional teaching methods

  11. Towards an Understanding of Instructional Design Heuristics: An Exploratory Delphi Study

    Science.gov (United States)

    York, Cindy S.; Ertmer, Peggy A.

    2011-01-01

    Evidence suggests that experienced instructional designers often use heuristics and adapted models when engaged in the instructional design problem-solving process. This study used the Delphi technique to identify a core set of heuristics designers reported as being important to the success of the design process. The overarching purpose of the…

  12. Design Principles for Online Instruction: A New Kind of Classroom

    Directory of Open Access Journals (Sweden)

    Neil TOPORSKI

    2004-01-01

    Full Text Available In the 1900’s, distance education attempted to mimic the traditional classroom lecture via the transmission of live or “canned” broadcasts, regardless of the technologies used: satellite, television, film, or radio. These kinds of media predisposed DE to closely adhere to the lecture (sit and absorb model, where content was disseminated in about the same time constraints as a traditional class: taught at scheduled times throughout the week–almost anywhere but not always anytime. Moreover, the modes of presentation in classic DE seemed to hinder the kinds of human interactions normally experienced in the traditional classroom, fostering individualized and isolated learning experiences.Online learning is a hybrid between the traditional classroom and the DE experience. Like the traditional classroom, instruction is teacher-facilitated. The student is enrolled in a conventional course with topic (lecture presentations, reading and homework assignments, classroom discussions, and class projects. Unlike the traditional classroom, courses are web-based and distributed from a distance, using an assortment of synchronous and asynchronous computer technologies and offered anywhere and anytime. In this way, online learning is different from the classic DE model by encouraging decentralized and collaborative learning environments. So that in this presentation will be discuss design principles for online instruction as being a new kind of classroom.

  13. Designing Technology-Enabled Instruction to Utilize Learning Analytics

    Science.gov (United States)

    Davies, Randall; Nyland, Robert; Bodily, Robert; Chapman, John; Jones, Brian; Young, Jay

    2017-01-01

    A key notion conveyed by those who advocate for the use of data to enhance instruction is an awareness that learning analytics has the potential to improve instruction and learning but is not currently reaching that potential. Gibbons (2014) suggested that a lack of learning facilitated by current technology-enabled instructional systems may be…

  14. The Design of an Instructional Model Based on Connectivism and Constructivism to Create Innovation in Real World Experience

    Science.gov (United States)

    Jirasatjanukul, Kanokrat; Jeerungsuwan, Namon

    2018-01-01

    The objectives of the research were to (1) design an instructional model based on Connectivism and Constructivism to create innovation in real world experience, (2) assess the model designed--the designed instructional model. The research involved 2 stages: (1) the instructional model design and (2) the instructional model rating. The sample…

  15. Model Adoption Exchange Payment System: Technical Specifications and User Instructions.

    Science.gov (United States)

    Ambrosino, Robert J.

    This user's manual, designed to meet the needs of adoption exchange administrators and program managers for a formal tool to assist them in the overall management and operation of their program, presents the Model Adoption Exchange Payment System (MAEPS), which was developed to improve the delivery of adoption exchange services throughout the…

  16. Applying Instructional Design Theories to Bioinformatics Education in Microarray Analysis and Primer Design Workshops

    Science.gov (United States)

    Shachak, Aviv; Ophir, Ron; Rubin, Eitan

    2005-01-01

    The need to support bioinformatics training has been widely recognized by scientists, industry, and government institutions. However, the discussion of instructional methods for teaching bioinformatics is only beginning. Here we report on a systematic attempt to design two bioinformatics workshops for graduate biology students on the basis of…

  17. Instructional Design Briefing A Brief Overview in Relation to the China COE

    Energy Technology Data Exchange (ETDEWEB)

    Osburn, Laura Ann [Los Alamos National Laboratory; Glasco, Bethany Lynn [Los Alamos National Laboratory

    2016-11-10

    This introduction provides a roadmap and guidance for the work that will be done by SMEs to prepare NDA course material to be transitioned from LANL to the China COE. It will cover the definition of instructional design; why instructional design is important; role of instructional designer vs an instructor and how they work together; and how this relates to our work in the China COE project.

  18. Design Heuristics in Academic, Corporate, and Military Instruction: More Similar than Different

    Science.gov (United States)

    York, Cindy S.; Ertmer, Peggy A.

    2013-01-01

    Despite the fact that the practice of instructional design (ID) began in the U. S. military (Branson et al., 1975; Jeffrey & Bratton-Jeffrey, 2004; Reiser, 2102), there is little known regarding which design and development heuristics military instructional designers deem important to the ID process. The study reported in this article was…

  19. A Design Study of a Multimedia Instructional Grammar Program with Embedded Tracking

    Science.gov (United States)

    Koehler, Natalya A.; Thompson, Ann D.; Phye, Gary D.

    2011-01-01

    This is a design study meant to demonstrate the feasibility of integrating three rather different theoretical perspectives for future efforts in multimedia instructional design. A multimedia instructional grammar program contextualized within the teaching of English as a Second Language (ESL) was developed and evaluated. The program design was…

  20. Aligning Game Activity with Educational Goals: Following a Constrained Design Approach to Instructional Computer Games

    Science.gov (United States)

    Shelton, Brett E.; Scoresby, Jon

    2011-01-01

    We discuss the design, creation and implementation of an instructional game for use in a high school poetry class following a commitment to an educational game design principle of "alignment". We studied groups of instructional designers and an interactive fiction computer game they built. The game was implemented in a 9th grade English classroom…

  1. The Implementation of Service-Learning in Graduate Instructional Design Coursework

    Science.gov (United States)

    Stefaniak, Jill E.

    2015-01-01

    This paper describes the design of service-learning experiences with a graduate-level instructional design course. Service-learning provides students with real-life experiences in a situated-learning environment. Students were tasked with working on an instructional design project in a real-world setting to gain consultative experience. This paper…

  2. PROPOSAL FOR A MOOC INSTRUCTIONAL DESIGN BASED ON THE THEORY DEVELOPMENT AND MASTERY LEARNIG

    Directory of Open Access Journals (Sweden)

    José Emilio Sánchez-García

    2016-07-01

    Full Text Available The first massive open online courses cMOOC lacked an instructional design and have now shifted to models that have an instructional design called xMOOC. This document makes a proposal instructional design for MOOC using the simplified adaptive method SAM inspired by the theory development and strategy of Mastery Learning as part of the research method based on the design of the qualitative paradigm. The results explain and justify the procedure used for the preparation of instructional design. The conclusion that has been reached is that both SAM and strategy Mastery Learning has allowed the instructional design for MOOC easily with emphasis in practice but supported with theoretical, personalized basis by tracking post and considering the learning strategy for the domain.

  3. Engineered waste-package-system design specification

    International Nuclear Information System (INIS)

    1983-05-01

    This report documents the waste package performance requirements and geologic and waste form data bases used in developing the conceptual designs for waste packages for salt, tuff, and basalt geologies. The data base reflects the latest geotechnical information on the geologic media of interest. The parameters or characteristics specified primarily cover spent fuel, defense high-level waste, and commercial high-level waste forms. The specification documents the direction taken during the conceptual design activity. A separate design specification will be developed prior to the start of the preliminary design activity

  4. Design of Learning Objects for Concept Learning: Effects of Multimedia Learning Principles and an Instructional Approach

    Science.gov (United States)

    Chiu, Thomas K. F.; Churchill, Daniel

    2016-01-01

    Literature suggests using multimedia learning principles in the design of instructional material. However, these principles may not be sufficient for the design of learning objects for concept learning in mathematics. This paper reports on an experimental study that investigated the effects of an instructional approach, which includes two teaching…

  5. Content Analysis of Research Trends in Instructional Design Models: 1999-2014

    Science.gov (United States)

    Göksu, Idris; Özcan, Kursat Volkan; Çakir, Recep; Göktas, Yuksel

    2017-01-01

    This study examines studies on instructional design models by applying content analysis. It covers 113 papers published in 44 international Social Science Citation Index (SSCI) and Science Citation Index (SCI) journals. Studies on instructional design models are explored in terms of journal of publication, preferred model, country where the study…

  6. Computer-Assisted Mathematics Instruction for Students with Specific Learning Disability: A Review of the Literature

    Science.gov (United States)

    Stultz, Sherry L.

    2017-01-01

    This review was conducted to evaluate the current body of scholarly research regarding the use of computer-assisted instruction (CAI) to teach mathematics to students with specific learning disability (SLD). For many years, computers are utilized for educational purposes. However, the effectiveness of CAI for teaching mathematics to this specific…

  7. The Effectiveness of Computer-Assisted Instruction for Teaching Mathematics to Students with Specific Learning Disability

    Science.gov (United States)

    Stultz, Sherry L.

    2013-01-01

    Using computers to teach students is not a new idea. Computers have been utilized for educational purposes for over 80 years. However, the effectiveness of these programs for teaching mathematics to students with specific learning disability is unclear. This study was undertaken to determine if computer-assisted instruction was as effective as…

  8. Discipline-Specific Language Instruction for International Students in Introductory Economics

    Science.gov (United States)

    Nguyen, Trien T.; Williams, Julia; Trimarchi, Angela

    2015-01-01

    This paper explores student perceptions of the effects of pairing discipline-specific language instruction with the traditional method of course delivery in economics. Our research involved teaching content-based English as an additional language (EAL) tutorials to a small group of ten international students taking first-year introductory…

  9. Effects of Task Instruction on Autobiographical Memory Specificity in Young and Older Adults

    Science.gov (United States)

    Ford, Jaclyn Hennessey; Rubin, David C.; Giovanello, Kelly S.

    2013-01-01

    Older adults tend to retrieve autobiographical information that is overly general (i.e. not restricted to a single event, termed the overgenerality effect) relative to young adults’ specific memories. A vast majority of studies that have reported overgenerality effects explicitly instruct participants to retrieve specific memories, thereby requiring participants to maintain task goals, inhibit inappropriate responses, and control their memory search. Since these processes are impaired in healthy aging, it is important to determine whether such task instructions influence the magnitude of the overgenerality effect in older adults. In the current study, participants retrieved autobiographical memories during presentation of musical clips. Task instructions were manipulated to separate age-related differences in the specificity of underlying memory representations from age-related differences in following task instructions. Whereas young adults modulated memory specificity based on task demands, older adults did not. These findings suggest that reported rates of overgenerality in older adults’ memories may include age-related differences in memory representation, as well as differences in task compliance. Such findings provide a better understanding of the underlying cognitive mechanisms involved in age-related changes in autobiographical memory and may also be valuable for future research examining effects of overgeneral memory on general well-being. PMID:23915176

  10. Effects of task instruction on autobiographical memory specificity in young and older adults.

    Science.gov (United States)

    Ford, Jaclyn Hennessey; Rubin, David C; Giovanello, Kelly S

    2014-01-01

    Older adults tend to retrieve autobiographical information that is overly general (i.e., not restricted to a single event, termed the overgenerality effect) relative to young adults' specific memories. A vast majority of studies that have reported overgenerality effects explicitly instruct participants to retrieve specific memories, thereby requiring participants to maintain task goals, inhibit inappropriate responses, and control their memory search. Since these processes are impaired in healthy ageing, it is important to determine whether such task instructions influence the magnitude of the overgenerality effect in older adults. In the current study participants retrieved autobiographical memories during presentation of musical clips. Task instructions were manipulated to separate age-related differences in the specificity of underlying memory representations from age-related differences in following task instructions. Whereas young adults modulated memory specificity based on task demands, older adults did not. These findings suggest that reported rates of overgenerality in older adults' memories might include age-related differences in memory representation, as well as differences in task compliance. Such findings provide a better understanding of the underlying cognitive mechanisms involved in age-related changes in autobiographical memory and may also be valuable for future research examining effects of overgeneral memory on general well-being.

  11. Site Specific Waste Management Instruction for the 116-F-4 soil storage unit

    International Nuclear Information System (INIS)

    Hopkins, G.G.

    1996-08-01

    This Site Specific Waste Management Instruction provides guidance for management of waste generated during the excavation and remediation of soil and debris from the 116-4 soil storage unit located at the Hanford Site in Richland, Washington. This document outlines the waste management practices that will be performed in the field to implement federal, state, and US Department of Energy requirements

  12. Interior Design's Role in Educational Specifications.

    Science.gov (United States)

    Keller, Mary Ann

    1986-01-01

    An experienced interior designer, equipped with a well-written educational specification, will specify the best materials and coordinate colors, materials, and furnishings in line with the district's budget. (MLF)

  13. Computational network design from functional specifications

    KAUST Repository

    Peng, Chi Han; Yang, Yong Liang; Bao, Fan; Fink, Daniel; Yan, Dongming; Wonka, Peter; Mitra, Niloy J.

    2016-01-01

    of people in a workspace. Designing such networks from scratch is challenging as even local network changes can have large global effects. We investigate how to computationally create networks starting from only high-level functional specifications

  14. Forum on specification and Design Languages

    CERN Document Server

    Maehne, Torsten

    2015-01-01

    This book brings together a selection of the best papers from the sixteenth edition of the Forum on specification and Design Languages Conference (FDL), which was held in September 2013 in Paris, France. FDL is a well-established international forum devoted to dissemination of research results, practical experiences and new ideas in the application of specification, design and verification languages to the design, modeling and verification of integrated circuits, complex hardware/software embedded systems, and mixed-technology systems. • Covers applications of formal methods for specification, verification and debug; • Includes embedded analog and mixed-signal system design; • Enables model-driven engineering for embedded systems design and development.

  15. Task-Specific Training and Job Design

    OpenAIRE

    Felipe Balmaceda

    2006-01-01

    This paper provides a simple theoretical framework based on a new type of human capital introduced by Gibbons and Waldman (2004), called task-specific training, to understand job design. Mainly, in the presence of task-specific training, promotions might result ex-post in the underutilization of human capital and thus firms at the time of designing jobs should attempt to diversify this risk.

  16. Readability of patient discharge instructions with and without the use of electronically available disease-specific templates.

    Science.gov (United States)

    Mueller, Stephanie K; Giannelli, Kyla; Boxer, Robert; Schnipper, Jeffrey L

    2015-07-01

    Low health literacy is common, leading to patient vulnerability during hospital discharge, when patients rely on written health instructions. We aimed to examine the impact of the use of electronic, patient-friendly, templated discharge instructions on the readability of discharge instructions provided to patients at discharge. We performed a retrospective cohort study of 233 patients discharged from a large tertiary care hospital to their homes following the implementation of a web-based "discharge module," which included the optional use of diagnosis-specific templated discharge instructions. We compared the readability of discharge instructions, as measured by the Flesch Reading Ease Level test (FREL, on a 0-100 scale, with higher scores indicating greater readability) and the Flesch-Kincaid Grade Level test (FKGL, measured in grade levels), between discharges that used templated instructions (with or without modification) versus discharges that used clinician-generated instructions (with or without available templated instructions for the specific discharge diagnosis). Templated discharge instructions were provided to patients in 45% of discharges. Of the 55% of patients that received clinician-generated discharge instructions, the majority (78.1%) had no available templated instruction for the specific discharge diagnosis. Templated discharge instructions had higher FREL scores (71 vs. 57, P readability (a higher FREL score and a lower FKGL score) than the use of clinician-generated discharge instructions. The main reason for clinicians to create discharge instructions was the lack of available templates for the patient's specific discharge diagnosis. Use of electronically available templated discharge instructions may be a viable option to improve the readability of written material provided to patients at discharge, although the library of available templates requires expansion. © The Author 2015. Published by Oxford University Press on behalf of the

  17. Transforming Multidisciplinary Customer Requirements to Product Design Specifications

    Science.gov (United States)

    Ma, Xiao-Jie; Ding, Guo-Fu; Qin, Sheng-Feng; Li, Rong; Yan, Kai-Yin; Xiao, Shou-Ne; Yang, Guang-Wu

    2017-09-01

    With the increasing of complexity of complex mechatronic products, it is necessary to involve multidisciplinary design teams, thus, the traditional customer requirements modeling for a single discipline team becomes difficult to be applied in a multidisciplinary team and project since team members with various disciplinary backgrounds may have different interpretations of the customers' requirements. A new synthesized multidisciplinary customer requirements modeling method is provided for obtaining and describing the common understanding of customer requirements (CRs) and more importantly transferring them into a detailed and accurate product design specifications (PDS) to interact with different team members effectively. A case study of designing a high speed train verifies the rationality and feasibility of the proposed multidisciplinary requirement modeling method for complex mechatronic product development. This proposed research offersthe instruction to realize the customer-driven personalized customization of complex mechatronic product.

  18. Operationalising elaboration theory for simulation instruction design: a Delphi study.

    Science.gov (United States)

    Haji, Faizal A; Khan, Rabia; Regehr, Glenn; Ng, Gary; de Ribaupierre, Sandrine; Dubrowski, Adam

    2015-06-01

    , thereby advancing the agenda of theoretically based instruction design in health care simulation. © 2015 John Wiley & Sons Ltd.

  19. Influence of encoding instructions and response bias on cross-cultural differences in specific recognition.

    Science.gov (United States)

    Paige, Laura E; Amado, Selen; Gutchess, Angela H

    2017-10-01

    Prior cross-cultural research has reported cultural variations in memory. One study revealed that Americans remembered images with more perceptual detail than East Asians (Millar et al. in Cult Brain 1(2-4):138-157, 2013). However, in a later study, this expected pattern was not replicated, possibly due to differences in encoding instructions (Paige et al. in Cortex 91:250-261, 2017). The present study sought to examine when cultural variation in memory-related decisions occur and the role of instructions. American and East Asian participants viewed images of objects while making a Purchase decision or an Approach decision and later completed a surprise recognition test. Results revealed Americans had higher hit rates for specific memory, regardless of instruction type, and a less stringent response criterion relative to East Asians. Additionally, a pattern emerged where the Approach decision enhanced hit rates for specific memory relative to the Purchase decision only when administered first; this pattern did not differ across cultures. Results suggest encoding instructions do not magnify cross-cultural differences in memory. Ultimately, cross-cultural differences in response bias, rather than memory sensitivity per se, may account for findings of cultural differences in memory specificity.

  20. Integrating Virtual Reality (VR) into traditional instructional design ...

    African Journals Online (AJOL)

    PROF. OLIVER OSUAGWA

    2015-12-01

    Dec 1, 2015 ... this technology and presented how to integrat VR with traditional instructional ... training has forced organizations to adopt new .... skills in a safe, controlled environment ... phone charger battery pack [B] connected to.

  1. The Creativity Dimension of Instructional Materials Designed by Prospective Teachers: The Comparison across Domains

    Directory of Open Access Journals (Sweden)

    Ersoy Esen

    2017-01-01

    Full Text Available This study aims at revealing the creativity dimension of the materials designed and developed by the second year students studying at the department of Computer Education and Instructional Technology. A part of the participants has completed the process by designing materials in their own field, information technologies; while some of them have done so by designing materials in the field of mathematics. The data have been retrieved from an experimental study of 13 weeks. “Teaching Material Creativity Rubric” developed by the researchers, has been used as the data collection tool. The rubric has been developed in order to evaluate the creativity dimensions of products. While developing the rubric, the creative product evaluation dimensions of [14] have been a source of inspiration. The products developed by the students have been evaluated through the retrieved data, in terms of their creativity. The rubric developed includes Originality, Practicality & Sensibility, Productivity & Flexibility, Feasibility, Inclusiveness, and Insightfulness dimensions. In this research, the data of the aforementioned dimensions and sub-dimensions have been evaluated. The results present that the creativity level of the products on teaching information technologies, which have been developed by Computer Education and Instructional Technology (CEIT students, is high. It has been argued that the creativity of domain-specifically developed materials is higher, through literature. Keywords: Material Design in Computers, Mathematics Teaching, Originality, Applicability, Creativity, Creativity and Domainswords.

  2. Designing Preclinical Instruction for Psychomotor Skills (II)--Instructional Engineering: Task Analysis.

    Science.gov (United States)

    Knight, G. William; And Others

    1994-01-01

    The first step in engineering the instruction of dental psychomotor skills, task analysis, is explained. A chart details the procedural, cognitive, desired-criteria, and desired-performance analysis of a single task, occlusal preparation for amalgam restoration with carious lesion. (MSE)

  3. A multimedia adult literacy program: Combining NASA technology, instructional design theory, and authentic literacy concepts

    Science.gov (United States)

    Willis, Jerry W.

    1993-01-01

    be the most effective or most desirable way to use computer technology in literacy programs. This project is developing a series of instructional packages that are based on a different instructional model - authentic instruction. The instructional development model used to create these packages is also different. Instead of using the traditional five stage linear, sequential model based on behavioral learning theory, the project uses the recursive, reflective design and development model (R2D2) that is based on cognitive learning theory, particularly the social constructivism of Vygotsky, and an epistemology based on critical theory. Using alternative instructional and instructional development theories, the result of the summer faculty fellowship is LiteraCity, a multimedia adult literacy instructional package that is a simulation of finding and applying for a job. The program, which is about 120 megabytes, is distributed on CD-ROM.

  4. A Conceptual Model for the Design and Delivery of Explicit Thinking Skills Instruction

    Science.gov (United States)

    Kassem, Cherrie L.

    2005-01-01

    Developing student thinking skills is an important goal for most educators. However, due to time constraints and weighty content standards, thinking skills instruction is often embedded in subject matter, implicit and incidental. For best results, thinking skills instruction requires a systematic design and explicit teaching strategies. The…

  5. Retinal waves are unlikely to instruct the formation of eye-specific retinogeniculate projections

    Directory of Open Access Journals (Sweden)

    Chalupa Leo M

    2009-07-01

    Full Text Available Abstract In all mammalian species the projections of the two eyes to the dorsal lateral geniculate nucleus are initially overlapping before gradually forming the eye-specific domains evident at maturity. It is widely thought that retinal waves of neuronal activity play an instructional role in this developmental process. Here, I discuss the myriad reasons why retinal waves are unlikely to have such a role, and suggest that eye-specific molecular cues in combination with neuronal activity are most probably involved in the formation of eye-specific retinogeniculate projections.

  6. Using instructional design process to improve design and development of Internet interventions.

    Science.gov (United States)

    Hilgart, Michelle M; Ritterband, Lee M; Thorndike, Frances P; Kinzie, Mable B

    2012-06-28

    Given the wide reach and extensive capabilities of the Internet, it is increasingly being used to deliver comprehensive behavioral and mental health intervention and prevention programs. Their goals are to change user behavior, reduce unwanted complications or symptoms, and improve health status and health-related quality of life. Internet interventions have been found efficacious in addressing a wide range of behavioral and mental health problems, including insomnia, nicotine dependence, obesity, diabetes, depression, and anxiety. Despite the existence of many Internet-based interventions, there is little research to inform their design and development. A model for behavior change in Internet interventions has been published to help guide future Internet intervention development and to help predict and explain behavior changes and symptom improvement outcomes through the use of Internet interventions. An argument is made for grounding the development of Internet interventions within a scientific framework. To that end, the model highlights a multitude of design-related components, areas, and elements, including user characteristics, environment, intervention content, level of intervention support, and targeted outcomes. However, more discussion is needed regarding how the design of the program should be developed to address these issues. While there is little research on the design and development of Internet interventions, there is a rich, related literature in the field of instructional design (ID) that can be used to inform Internet intervention development. ID models are prescriptive models that describe a set of activities involved in the planning, implementation, and evaluation of instructional programs. Using ID process models has been shown to increase the effectiveness of learning programs in a broad range of contexts. ID models specify a systematic method for assessing the needs of learners (intervention users) to determine the gaps between current

  7. Forum on Specifications and Design Languages 2012

    CERN Document Server

    2014-01-01

    This book brings together a selection of the best papers from the fifteenth edition of the Forum on specification and Design Languages Conference (FDL), which was held in September 2012 at Vienna University of Technology, Vienna, Austria.  FDL is a well-established international forum devoted to dissemination of research results, practical experiences and new ideas in the application of specification, design and verification languages to the design, modeling and verification of integrated circuits, complex hardware/software embedded systems, and mixed-technology systems.  ·         Covers Assertion Based Design, Verification & Debug; ·         Includes language-based modeling and design techniques for embedded systems; ·         Covers design, modeling and verification of mixed physical domain and mixed signal systems that include significant analog parts in electrical and non-electrical domains; ·         Includes formal and semi-formal system level design methods fo...

  8. Site-Specific Waste Management Instruction - 100-DR-1 Group 2 Sites

    International Nuclear Information System (INIS)

    Jackson, R.W.

    1998-01-01

    This site-specific waste management instruction (SSWMI) provides guidance for the management of wastes that may be generated during the excavation and remediation of the 100-DR-1 Group 2 sites. The management of waste generated as a result of these activities will be as directed in this SSWMI. This SSWMI will be revised to incorporate guidance for management of wastes encountered that are not addressed in this SSWMI

  9. Site-specific waste management instruction for the 100-KR-4 Operable Unit drilling

    International Nuclear Information System (INIS)

    Hadley, J.T.

    1996-07-01

    This site-specific waste management instruction provides guidance for the management of waste generated as a result of groundwater well installations in the 100-KR-4 Operable Unit (OU). The well installations are necessary to implement the Remedial Action (RA) option (pump-and-treat using ion exchange) to prevent discharge of hexavalent chromium at levels above those considered protective of aquatic life in the Columbia River and riverbed sediments

  10. Site-specific waste management instruction for the 100-KR-4 Operable Unit drilling. Revision 1

    International Nuclear Information System (INIS)

    Hadley, J.T.

    1996-08-01

    This site-specific waste management instruction provides guidance for the management of waste generated as a result of groundwater well installations in the 100-KR-4 Operable Unit (OU). The well installations are necessary to implement the Remedial Action (RA) option (pump-and-treat using ion exchange) to prevent discharge of hexavalent chromium at levels above those considered protective of aquatic life in the Columbia River and riverbed sediments

  11. Research overview : design specifications for hybrid vehicles

    NARCIS (Netherlands)

    Hofman, T.; Druten, van R.M.

    2004-01-01

    In this paper a method is proposed for determination of the design specifications regarding the energy exchange systems for different chargesustaining hybrid vehicles of different vehicle classes. Hybrid drivetrains for vehicles combine multiple power sources in order to increase the driving

  12. A Comprehensive Rubric for Instructional Design in E-Learning

    Science.gov (United States)

    Debattista, Martin

    2018-01-01

    Purpose: The recognition of practice in online instruction is still subject to interpretation and different approaches as a result of the rapid changes in technology and its effect on society. The purpose of this paper is to address these differences through a synthesis that can be easily accessed and consulted by educators in the field of…

  13. Three Principles of Perception for Instructional Interface Design.

    Science.gov (United States)

    Lohr, Linda L.

    2000-01-01

    Discusses graphical user interfaces used for instructional purposes in educational environments, which promote learning goals, and in support environments, which promote performance goals. Explains three key principles of perception and gives guidelines for their use, including the figure/ground principle, the hierarchy principle, and the gestalt…

  14. Computational network design from functional specifications

    KAUST Repository

    Peng, Chi Han

    2016-07-11

    Connectivity and layout of underlying networks largely determine agent behavior and usage in many environments. For example, transportation networks determine the flow of traffic in a neighborhood, whereas building floorplans determine the flow of people in a workspace. Designing such networks from scratch is challenging as even local network changes can have large global effects. We investigate how to computationally create networks starting from only high-level functional specifications. Such specifications can be in the form of network density, travel time versus network length, traffic type, destination location, etc. We propose an integer programming-based approach that guarantees that the resultant networks are valid by fulfilling all the specified hard constraints and that they score favorably in terms of the objective function. We evaluate our algorithm in two different design settings, street layout and floorplans to demonstrate that diverse networks can emerge purely from high-level functional specifications.

  15. Applying Universal Instructional Design to Course Websites by Using Course Evaluations

    Science.gov (United States)

    Carter, Irene; Leslie, Donald; Kwan, Denise

    2012-01-01

    The authors explore their use of learner-centred teaching strategies and Universal Instructional Design (UID) on course websites. UID is based on universal design, the design of products and environments intended to be usable by all people to the greatest extent possible (Burgstahler & Cory, 2008). UID applies universal design to instructional…

  16. The Impact of an Instructional Intervention Designed to Support Development of Stochastic Understanding of Probability Distribution

    Science.gov (United States)

    Conant, Darcy Lynn

    2013-01-01

    Stochastic understanding of probability distribution undergirds development of conceptual connections between probability and statistics and supports development of a principled understanding of statistical inference. This study investigated the impact of an instructional course intervention designed to support development of stochastic…

  17. An approach to participatory instructional design in secondary education: an exploratory study

    NARCIS (Netherlands)

    Könings, Karen; Brand-Gruwel, Saskia; Van Merriënboer, Jeroen

    2010-01-01

    Könings, K. D., Brand-Gruwel, S., & Van Merriënboer, J. J. G. (2010). An approach to participatory instructional design in secondary education: an exploratory study. Educational Research, 52(1), 45-59.

  18. Evaluating Online Dialogue on “Security” Using a Novel Instructional Design

    NARCIS (Netherlands)

    P.A. Arora (Payal)

    2008-01-01

    textabstractAbstract: This paper explores evaluation strategies to gauge the impact of a novel instructional design on international community participation online. This is done by conceptualizing and devising indicators for measuring “engagement” online amongst marginalized adult communities

  19. Instructional Plans and Situated Learning: The Challenge of Suchman's Theory of Situated Action for Instructional Designers and Instructional Systems.

    Science.gov (United States)

    Streibel, Michael J.

    This paper discusses the implications of Lucy Suchman's conclusion that a theory of situated action--i.e., the actual sense that specific users make out of specific Xeroxing events--is truer to the lived experience of Xerox users than a cognitive account of the user's plans--e.g., the hierarchy of subprocedures for how Xerox machines should be…

  20. Discipline-Specific Language Instruction for International Students in Introductory Economics

    Directory of Open Access Journals (Sweden)

    Trien T. Nguyen

    2015-12-01

    Full Text Available This paper explores student perceptions of the effects of pairing discipline-specific language instruction with the traditional method of course delivery in economics. Our research involved teaching content-based English as an additional language (EAL tutorials to a small group of ten international students taking first-year introductory economics courses. These voluntary participants completed pre- and post-treatment assessments with exit interviews at the end of the project. Assessment results and interviews suggest that students perceive that discipline-specific language instruction such as our EAL tutorials assists in the development of increased content and language proficiency. They also believe that vocabulary development is one of the most critical activities to support these goals; reading skills are also important but require more time and commitment than students can afford to give. Despite the students’ interest in the project, their heavy class schedules prevented many from participating; our group was limited to ten students which precludes any assurance of statistical significance. In spite of the limitations, we believe that the project can still contribute valuable qualitative lessons to the literature of content-based language instruction in which the discipline of economics has not been well represented.

  1. Instructional Design for Accelerated Macrocognitive Expertise in the Baseball Workplace

    OpenAIRE

    Fadde, Peter J.

    2016-01-01

    The goal of accelerating expertise can leave researchers and trainers in human factors, naturalistic decision making, sport science, and expertise studies concerned about seemingly insufficient application of expert performance theories, findings and methods for training macrocognitive aspects of human performance. Video-occlusion methods perfected by sports expertise researchers have great instructional utility, in some cases offering an effective and inexpensive alternative to high-fidelity...

  2. Designing Domain-Specific Heterogeneous Architectures from Dataflow Programs

    Directory of Open Access Journals (Sweden)

    Süleyman Savas

    2018-04-01

    Full Text Available The last ten years have seen performance and power requirements pushing computer architectures using only a single core towards so-called manycore systems with hundreds of cores on a single chip. To further increase performance and energy efficiency, we are now seeing the development of heterogeneous architectures with specialized and accelerated cores. However, designing these heterogeneous systems is a challenging task due to their inherent complexity. We proposed an approach for designing domain-specific heterogeneous architectures based on instruction augmentation through the integration of hardware accelerators into simple cores. These hardware accelerators were determined based on their common use among applications within a certain domain.The objective was to generate heterogeneous architectures by integrating many of these accelerated cores and connecting them with a network-on-chip. The proposed approach aimed to ease the design of heterogeneous manycore architectures—and, consequently, exploration of the design space—by automating the design steps. To evaluate our approach, we enhanced our software tool chain with a tool that can generate accelerated cores from dataflow programs. This new tool chain was evaluated with the aid of two use cases: radar signal processing and mobile baseband processing. We could achieve an approximately 4 × improvement in performance, while executing complete applications on the augmented cores with a small impact (2.5–13% on area usage. The generated accelerators are competitive, achieving more than 90% of the performance of hand-written implementations.

  3. A CRITICAL REVIEW OF INSTRUCTIONAL DESIGN PROCESS OF DISTANCE LEARNING SYSTEM

    Directory of Open Access Journals (Sweden)

    Muhammad Ajmal CHAUDRY

    2010-07-01

    Full Text Available Instructional design refers to planning, development, delivery and evaluation of instructional system. It is an applied field of study aiming at the application of descriptive research outcomes in regular instructional settings. The present study was designed to critically review the process of instructional design at Allama Iqbal Open University (AIOU. It was survey study. Population of the study consisted of 120 academicians of different academic department of AIOU. Survey was conducted through questionnaire for academic staff. It was revealed that need assessment is not done before conceiving the outlines of a course. Also the course did not contain sufficient activities, picture and illustrations. It was also found that did not confirm the course objectives. The study recommended that proper of the course writers for distance learning may be arranged.

  4. An Alternative View of the Instructional Design Process: A Response to Smith and Boling

    Science.gov (United States)

    Gibbons, Andrew S.; Yanchar, Stephen C.

    2010-01-01

    A recent literature review by Smith and Boling (2009) critically examines the received view of instructional design in educational technology. Smith and Boling conclude that the foundational literature characterizes design in a way that leads to a constrained understanding of design, especially by novices. They suggest that as a field we move…

  5. Instructional Designers' Media Selection Practices for Distributed Problem-Based Learning Environments

    Science.gov (United States)

    Fells, Stephanie

    2012-01-01

    The design of online or distributed problem-based learning (dPBL) is a nascent, complex design problem. Instructional designers are challenged to effectively unite the constructivist principles of problem-based learning (PBL) with appropriate media in order to create quality dPBL environments. While computer-mediated communication (CMC) tools and…

  6. A pilot study of the effects of RightStart instruction on early numeracy skills of children with specific language impairment.

    Science.gov (United States)

    Mononen, Riikka; Aunio, Pirjo; Koponen, Tuire

    2014-05-01

    This pilot study investigated the effects of an early numeracy program, RightStart Mathematics (RS), on Finnish kindergartners with specific language impairment (SLI). The study applied a pre-test-instruction-post-test design. The children with SLI (n=9, Mage=82.11 months) received RS instruction two to three times a week for 40 min over seven months, which replaced their business-as-usual mathematics instruction. Mathematical skill development among children with SLI was examined at the individual and group levels, and compared to the performance of normal language-achieving age peers (n=32, Mage=74.16 months) who received business-as-usual kindergarten mathematics instruction. The children with SLI began kindergarten with significantly weaker early numeracy skills compared to their peers. Immediately after the instruction phase, there was no significant difference between the groups in counting skills. In Grade 1, the children with SLI performed similarly to their peers in addition and subtraction skills (accuracy) and multi-digit number comparison, but showed weaker skills in arithmetical reasoning and in matching spoken and printed multi-digit numbers. Our pilot study showed encouraging signs that the early numeracy skills of children with SLI can be improved successfully in a kindergarten small-classroom setting with systematic instruction emphasizing visualization. Copyright © 2014 Elsevier Ltd. All rights reserved.

  7. Space shuttle configuration accounting functional design specification

    Science.gov (United States)

    1974-01-01

    An analysis is presented of the requirements for an on-line automated system which must be capable of tracking the status of requirements and engineering changes and of providing accurate and timely records. The functional design specification provides the definition, description, and character length of the required data elements and the interrelationship of data elements to adequately track, display, and report the status of active configuration changes. As changes to the space shuttle program levels II and III configuration are proposed, evaluated, and dispositioned, it is the function of the configuration management office to maintain records regarding changes to the baseline and to track and report the status of those changes. The configuration accounting system will consist of a combination of computers, computer terminals, software, and procedures, all of which are designed to store, retrieve, display, and process information required to track proposed and proved engineering changes to maintain baseline documentation of the space shuttle program levels II and III.

  8. What Is This Thing Called "Design" in Design Research and Instructional Design

    Science.gov (United States)

    Cronje, Johannes

    2013-01-01

    This paper will consider the phenomenon of design research. It will then consider four research positions in social science research. The paper will show how the design perspectives map onto the research paradigms and how by rotating through these paradigms, a design research cycle is formed. Finally, the paper will discuss four research questions…

  9. Instruction by Design, A Report on the Conference on New Instructional Materials in Physics (University of Washington, Seattle, June 21-August 21, 1965).

    Science.gov (United States)

    Commission on Coll. Physics, College Park, MD.

    This review has a section devoted to each of the following conference topics: Monographs, Film, Experiment Sequences, Computer-assisted Instruction, Designing a Unit of Instruction, and Toward New Solutions. Each section contains background discussion on the rationale, philosophy, and importance for improvements in the area being considered. The…

  10. Developing Instructional Design to Improve Mathematical Higher Order Thinking Skills of Students

    Science.gov (United States)

    Apino, E.; Retnawati, H.

    2017-02-01

    This study aimed to describe the instructional design to improve the Higher Order Thinking Skills (HOTS) of students in learning mathematics. This research is design research involving teachers and students of class X MIPA 1 MAN Yigyakarta III, Special Region of Yogyakarta, Indonesia. Data collected through focus group discussions and tests. Data analyzed by quantitative descriptive. The results showed that the instructional design developed is effective to improving students’ HOTS in learning mathematics. Instructional design developed generally include three main components: (1) involve students in the activities non-routine problem solving; (2) facilitating students to develop the ability to analyze and evaluate (critical thinking) and the ability to create (creative thinking); and (3) encourage students to construct their own knowledge.

  11. Salt bridges: geometrically specific, designable interactions.

    Science.gov (United States)

    Donald, Jason E; Kulp, Daniel W; DeGrado, William F

    2011-03-01

    Salt bridges occur frequently in proteins, providing conformational specificity and contributing to molecular recognition and catalysis. We present a comprehensive analysis of these interactions in protein structures by surveying a large database of protein structures. Salt bridges between Asp or Glu and His, Arg, or Lys display extremely well-defined geometric preferences. Several previously observed preferences are confirmed, and others that were previously unrecognized are discovered. Salt bridges are explored for their preferences for different separations in sequence and in space, geometric preferences within proteins and at protein-protein interfaces, co-operativity in networked salt bridges, inclusion within metal-binding sites, preference for acidic electrons, apparent conformational side chain entropy reduction on formation, and degree of burial. Salt bridges occur far more frequently between residues at close than distant sequence separations, but, at close distances, there remain strong preferences for salt bridges at specific separations. Specific types of complex salt bridges, involving three or more members, are also discovered. As we observe a strong relationship between the propensity to form a salt bridge and the placement of salt-bridging residues in protein sequences, we discuss the role that salt bridges might play in kinetically influencing protein folding and thermodynamically stabilizing the native conformation. We also develop a quantitative method to select appropriate crystal structure resolution and B-factor cutoffs. Detailed knowledge of these geometric and sequence dependences should aid de novo design and prediction algorithms. Copyright © 2010 Wiley-Liss, Inc.

  12. Food Design Thinking: A Branch of Design Thinking Specific to Food Design

    Science.gov (United States)

    Zampollo, Francesca; Peacock, Matthew

    2016-01-01

    Is there a need for a set of methods within Design Thinking tailored specifically for the Food Design process? Is there a need for a branch of Design Thinking dedicated to Food Design alone? Chefs are not generally trained in Design or Design Thinking, and we are only just beginning to understand how they ideate and what recourses are available to…

  13. Instructional Design to Measure the Efficacy of Interactive E-Books in a High School Setting

    Science.gov (United States)

    Pabrua Batoon, Maria Victoria; Glasserman Morales, Leonardo David; Yanez Figueroa, Jose Antonio

    2018-01-01

    This article describes a qualitative research analysis on the implementation of interactive ebooks in high school courses using a case study approach. The subjects of the study included seven professors and 16 freshmen who were surveyed and interviewed with a questionnaire designed according to the Kemp Model of Instructional Design. The study…

  14. Design Models as Emergent Features: An Empirical Study in Communication and Shared Mental Models in Instructional

    Science.gov (United States)

    Botturi, Luca

    2006-01-01

    This paper reports the results of an empirical study that investigated the instructional design process of three teams involved in the development of an e-­learning unit. The teams declared they were using the same fast-­prototyping design and development model, and were composed of the same roles (although with a different number of SMEs).…

  15. A Simulation-Based LED Design Project in Photonics Instruction Based on Industry-University Collaboration

    Science.gov (United States)

    Chang, S. -H.; Chen, M. -L.; Kuo, Y. -K.; Shen, Y. -C.

    2011-01-01

    In response to the growing industrial demand for light-emitting diode (LED) design professionals, based on industry-university collaboration in Taiwan, this paper develops a novel instructional approach: a simulation-based learning course with peer assessment to develop students' professional skills in LED design as required by industry as well as…

  16. Using Importance-Performance Analysis to Guide Instructional Design of Experiential Learning Activities

    Science.gov (United States)

    Anderson, Sheri; Hsu, Yu-Chang; Kinney, Judy

    2016-01-01

    Designing experiential learning activities requires an instructor to think about what they want the students to learn. Using importance-performance analysis can assist with the instructional design of the activities. This exploratory study used importance-performance analysis in an online introduction to criminology course. There is limited…

  17. Development and Implementation of an Instructional Design for Effective Teaching of Ecosystem, Biodiversity, and Environmental Issues

    Science.gov (United States)

    Yucel, Elif Ozata; Ozkan, Muhlis

    2015-01-01

    This study aims to develop an instructional design whereby ecosystem, biodiversity, and environmental issues are addressed with a holistic approach that provides more efficient teaching as well as to test the effectiveness of this design. A literature review was carried out and need-assessment was firstly made using the Readiness Test. This review…

  18. Towards Cognitive Load Theory as Guideline for Instructional Design in Science Education

    Science.gov (United States)

    Meissner, Barbara; Bogner, Franz X.

    2013-01-01

    We applied cognitive load theory in an heuristic out-of-school science lesson. The lesson comprises experiments concerning major attributes of NaCl and was designed for 5th to 8th grade students. Our interest focused on whether cognitive load theory provides sufficient guidelines for instructional design in the field of heuristic science…

  19. The Effects of Instructional Design on Student Engagement with Video Lectures at Cyber Universities

    Directory of Open Access Journals (Sweden)

    Jamie Costley

    2017-05-01

    Full Text Available Aim/Purpose: The number of students enrolled in online courses that use video lectures is on the rise. However, research shows that the number of students watching video lectures is low, and the number watching videos to completion is even lower. Background: This paper seeks to understand this problem by looking for correlations between instructional design and student engagement with video lectures. Methodology: Students at a cyber-university in South Korea (n=1801 were surveyed on their perception of the instructional design used in the courses they took and their engagement with online video lectures. Contribution: This paper contributes to the body of knowledge by demonstrating positive correlations between instructional design, watching, and finishing video lectures. Findings: While most other research has found low levels of online lecture viewership, this paper found significantly higher numbers watching and finishing videos. Other major findings of the paper are that five key elements of instructional design for online learning environments (designing methods, setting the curriculum, establishing time parameters, establishing netiquette, and utilizing the medium effectively all correlated positively with students watching and finishing video lectures. Recommendations for Practitioners\t: Based on findings in this paper, it is recommended that practitioners consider taking actions when designing their instruction for online courses. These include batching their video lectures together by topic, devoting greater resources to helping students utilize the medium, and communicate time parameters in a way that encourages students to view video lectures in a timely manner. Recommendation for Researchers: As the watching of video lectures in this study was mandatory for learners, an interesting area of further research would be to examine whether that decision led to higher numbers of students watching them. Future Research: It is important for

  20. User-Centered Design through Learner-Centered Instruction

    Science.gov (United States)

    Altay, Burçak

    2014-01-01

    This article initially demonstrates the parallels between the learner-centered approach in education and the user-centered approach in design disciplines. Afterward, a course on human factors that applies learner-centered methods to teach user-centered design is introduced. The focus is on three tasks to identify the application of theoretical and…

  1. Espoused Theory and Theory-in-Use of Instructional Designers in the Use of Constructivism in Online Writing Instruction Programs

    Science.gov (United States)

    Merrell, Cheryl

    2013-01-01

    Online Writing Instruction (OWI) has become a viable educational alternative in online instruction in the K-12 educational community. To continue to effectively compete in a global society, educators have identified a necessity for instruction that replicates real-world situations and problem-solving tasks which is consistent with constructivism.…

  2. Instructional Design, Facilitation, and Perceived Learning Outcomes: An Exploratory Case Study of a Human Trafficking MOOC for Attitudinal Change

    Science.gov (United States)

    Watson, Sunnie Lee; Loizzo, Jamie; Watson, William R.; Mueller, Chad; Lim, Jieun; Ertmer, Peggy A.

    2016-01-01

    This exploratory case study describes the design and facilitation of a massive open online course (MOOC) for attitudinal change regarding human trafficking. It examines the course from the learners', instructor's, and instructional designer's perspectives. Two interviews with the instructor and instructional designer were conducted, and data from…

  3. Universal Design for Learning: Guidelines for Accessible Online Instruction

    Science.gov (United States)

    Rogers-Shaw, Carol; Carr-Chellman, Davin J.; Choi, Jinhee

    2018-01-01

    Universal Design for Learning (UDL) is a framework for the teaching-learning transaction that conceptualizes knowledge through learner-centered foci emphasizing accessibility, collaboration, and community. Given the importance of access to achieving social justice, UDL is a promising approach to meeting all learners' needs more effectively. In…

  4. Analysis of the effect of specific vocabulary instruction on high school chemistry students' knowledge and understanding

    Science.gov (United States)

    Labrosse, Peggy

    The purpose of this study was to analyze the effects of specific vocabulary instruction on high school chemistry students' knowledge and understanding. Students might be able to formally recite a definition for a term without actually having understood the meaning of the term and its connection to other terms or to related concepts. Researchers (Cassels & Johnstone, 1983; Gabel, 1999; Johnstone, 1991) have been studying the difficulty students have in learning science, particularly chemistry. Gabel (1999) suggests that, "while research into misconceptions (also known as alternative conceptions) and problem-solving has dominated the field for the past 25 years, we are no closer to a solution that would improve the teaching and learning of chemistry" (P. 549). Gabel (1999) relates the difficulty in learning chemistry to use of language. She refers to student difficulty both with words that have more than one meaning in English and with words that are used to mean one idea in chemistry and another idea in every day language. The Frayer Model, a research-based teaching strategy, is a graphic organizer which students use to create meaningful definitions for terms in context (Frayer, Frederick, & Klausmeier, 1969). It was used as the treatment---the specific vocabulary instruction---in this research study. The researcher collected and analyzed data to answer three research questions that focused on the effect of using the Frayer model (a graphic organizer) on high school students' knowledge and understanding of academic language used in chemistry. The research took place in a New England high school. Four intact chemistry classes provided the student participants; two classes were assigned to the treatment group (TG) and two classes were assigned to the control group (CG). The TG received vocabulary instruction on 14 chosen terms using the Frayer Model. The CG received traditional vocabulary instruction with no special attention to the 14 terms selected for this study

  5. The Goal Specificity Effect on Strategy Use and Instructional Efficiency during Computer-Based Scientific Discovery Learning

    Science.gov (United States)

    Kunsting, Josef; Wirth, Joachim; Paas, Fred

    2011-01-01

    Using a computer-based scientific discovery learning environment on buoyancy in fluids we investigated the "effects of goal specificity" (nonspecific goals vs. specific goals) for two goal types (problem solving goals vs. learning goals) on "strategy use" and "instructional efficiency". Our empirical findings close an important research gap,…

  6. Efficacy of the Technological/Engineering Design Approach: Imposed Cognitive Demands within Design-Based Biotechnology Instruction

    Science.gov (United States)

    Wells, John G.

    2016-01-01

    Though not empirically established as an efficacious pedagogy for promoting higher order thinking skills, technological/engineering design-based learning in K-12 STEM education is increasingly embraced as a core instructional method for integrative STEM learning that promotes the development of student critical thinking skills (Honey, Pearson,…

  7. Site-specific waste management instruction for the field sampling organization

    International Nuclear Information System (INIS)

    Bryant, D.L.

    1997-01-01

    The Site-Specific Waste Management Instruction (SSWMI) provides guidance for the management of waste generated from field-sampling activities performed by the Environment Restoration Contractor (ERC) Sampling Organization that are not managed as part of a project SSWMI. Generally, the waste is unused preserved groundwater trip blanks, used and expired calibration solutions, and other similar waste that cannot be returned to an ERC project for disposal. The specific waste streams addressed by this SSWMI are identified in Section 2.0. This SSWMI was prepared in accordance with BHI-EE-02, Environmental Requirements. Waste generated from field sample collection activities should be returned to the project and managed in accordance with the applicable project-specific SSWMI whenever possible. However, returning all field sample collection and associated waste to a project for disposal may not always be practical or cost effective. Therefore, the ERC field sampling organization must manage and arrange to dispose of the waste using the (Bechtel Hanford, Inc. [BHI]) Field Support Waste Management (FSWM) services. This SSWMI addresses those waste streams that are the responsibility of the field sampling organization to manage and make arrangements for disposal

  8. Is the Flipped Classroom Model for All? Correspondence Analysis from Trainee Instructional Media Designers

    Science.gov (United States)

    Pellas, Nikolaos

    2018-01-01

    The educational potentials and challenges of "flipping" a classroom are today well-documented. However, taking into account the contradictory results, literature on the benefits in using the flipped model as a socially inclusive technology-supported instructional design model is still in its infancy. This study seeks to investigate the…

  9. Evaluation of iTunes University Courses through Instructional Design Strategies and m-Learning Framework

    Science.gov (United States)

    Tseng, Hung Wei; Tang, Yingqi; Morris, Betty

    2016-01-01

    As mobile learning technology promotes learning accessibility and flexibility, students benefit from social interactivity and connective learning process which will also foster students' performance and satisfaction on learning content. The primary purpose of this research was to evaluate iTunes U courses based on instructional design strategies…

  10. Designing Reading Instruction for Cultural Minorities: The Case of the Kamehameha Early Education Program.

    Science.gov (United States)

    Calfee, Robert C.; And Others

    This is a report on the Kamehameha Early Education Program (KEEP), a research and development project designed to find ways of improving the school performance of educationally disadvantaged Hawaiian children. The project, implemented in a laboratory school setting and continuously monitored, is described as a reading instruction program for…

  11. Blended/Hybrid Courses: A Review of the Literature and Recommendations for Instructional Designers and Educators

    Science.gov (United States)

    Helms, Samuel A.

    2014-01-01

    This article explores some of the literature on blended/hybrid learning and identifies recommendations for instructional designers and faculty. Terminology and definitions are discussed first including the debate between the words "blended" and "hybrid." A working definition for the article is discussed but the article does not…

  12. Using Diffusion of Innovation Theory to Promote Universally Designed College Instruction

    Science.gov (United States)

    Scott, Sally; McGuire, Joan

    2017-01-01

    Universal Design applied to college instruction has evolved and rapidly spread on an international scale. Diffusion of Innovation theory is described and used to identify patterns of change in this trend. Implications and strategies are discussed for promoting this inclusive approach to teaching in higher education.

  13. Elementary Students' Learning of Materials Science Practices Through Instruction Based on Engineering Design Tasks

    Science.gov (United States)

    Wendell, Kristen Bethke; Lee, Hee-Sun

    2010-12-01

    Materials science, which entails the practices of selecting, testing, and characterizing materials, is an important discipline within the study of matter. This paper examines how third grade students' materials science performance changes over the course of instruction based on an engineering design challenge. We conducted a case study of nine students who participated in engineering design-based science instruction with the goal of constructing a stable, quiet, thermally comfortable model house. The learning outcome of materials science practices was assessed by clinical interviews conducted before and after the instruction, and the learning process was assessed by students' workbooks completed during the instruction. The interviews included two materials selection tasks for designing a sturdy stepstool and an insulated pet habitat. Results indicate that: (1) students significantly improved on both materials selection tasks, (2) their gains were significantly positively associated with the degree of completion of their workbooks, and (3) students who were highly engaged with the workbook's reflective record-keeping tasks showed the greatest improvement on the interviews. These findings suggest the important role workbooks can play in facilitating elementary students' learning of science through authentic activity such as engineering design.

  14. Designing Online Instruction for Success: Future Oriented Motivation and Self-Regulation

    Science.gov (United States)

    Schmidt, Joel T.; Werner, Christian H.

    2007-01-01

    Given the high rate of student drop-out and withdrawal from courses and programs using an online learning format, it is important to consider innovative ways to foster and encourage student success in online environments. One such way is to incorporate aspects of student future orientation into the design of online instruction. This paper presents…

  15. Lights, Camera, Action: Facilitating the Design and Production of Effective Instructional Videos

    Science.gov (United States)

    Di Paolo, Terry; Wakefield, Jenny S.; Mills, Leila A.; Baker, Laura

    2017-01-01

    This paper outlines a rudimentary process intended to guide faculty in K-12 and higher education through the steps involved to produce video for their classes. The process comprises four steps: planning, development, delivery and reflection. Each step is infused with instructional design information intended to support the collaboration between…

  16. The Implementation and Evaluation of an Instructional Design Based on the Interdisciplinary Approach: Conscious Consumer Education

    Science.gov (United States)

    Karakus, Memet; Uyar, Melis Yesilpinar

    2018-01-01

    The aim of this study was to implement and evaluate the instructional design prepared as consumer-oriented and based upon interdisciplinary curriculum. In this study, case study approach, which is one of the qualitative research patterns, was employed. Observations, interviews and document analysis were used to collect data. For analyzing the…

  17. Using the DSAP Framework to Guide Instructional Design and Technology Integration in BYOD Classrooms

    Science.gov (United States)

    Wasko, Christopher W.

    2016-01-01

    The purpose of this study was to determine the suitability of the DSAP Framework to guide instructional design and technology integration for teachers piloting a BYOD (Bring Your Own Device) initiative and to measure the impact the initiative had on the amount and type of technology used in pilot classrooms. Quantitative and qualitative data were…

  18. STEM Teachers' Planned and Enacted Attempts at Implementing Engineering Design-Based Instruction

    Science.gov (United States)

    Capobianco, Brenda M.; Rupp, Madeline

    2014-01-01

    This study investigates grades 5 and 6 science, technology, engineering, and mathematics (STEM) teachers' planned and actualized engineering design-based instruction, the instruments used to characterize their efforts, and the implications this work has for teachers' implementations of an integrated approach to STEM education.…

  19. Scaffolded Instruction Improves Student Understanding of the Scientific Method & Experimental Design

    Science.gov (United States)

    D'Costa, Allison R.; Schlueter, Mark A.

    2013-01-01

    Implementation of a guided-inquiry lab in introductory biology classes, along with scaffolded instruction, improved students' understanding of the scientific method, their ability to design an experiment, and their identification of experimental variables. Pre- and postassessments from experimental versus control sections over three semesters…

  20. Instructional Control of Cognitive Load in the Design of Complex Learning Environments

    NARCIS (Netherlands)

    Kester, Liesbeth; Paas, Fred; Van Merriënboer, Jeroen

    2010-01-01

    Kester, L., Paas, F., & Van Merriënboer, J. J. G. (2010). Instructional control of cognitive load in the design of complex learning environments. In J. L. Plass, R. Moreno, & Roland Brünken (Eds.), Cognitive Load Theory (pp. 109-130). New York: Cambridge University Press.

  1. Cognitive Load Theory, Educational Research, and Instructional Design: Some Food for Thought

    Science.gov (United States)

    de Jong, Ton

    2010-01-01

    Cognitive load is a theoretical notion with an increasingly central role in the educational research literature. The basic idea of cognitive load theory is that cognitive capacity in working memory is limited, so that if a learning task requires too much capacity, learning will be hampered. The recommended remedy is to design instructional systems…

  2. An Instructional Design Framework to Improve Student Learning in a First-Year Engineering Class

    Science.gov (United States)

    Yelamarthi, Kumar; Drake, Eron; Prewett, Matthew

    2016-01-01

    Increasingly, numerous universities have identified benefits of flipped learning environments and have been encouraging instructors to adapt such methodologies in their respective classrooms, at a time when departments are facing significant budget constraints. This article proposes an instructional design framework utilized to strategically…

  3. Instructional Design in Job Skills Training for Welfare Recipients and Displaced Workers

    Science.gov (United States)

    Richardson, Arline; Storberg-Walker, Julia

    2006-01-01

    Scully-Russ (2005) described the low-wage labor market issue and the tendency in academic literature to view the problem as "fixing" the skills of low wageworkers. However, the article does not address instructional design issues surrounding low-wage employee training interventions. This manuscript attempts to discover the key factors surrounding…

  4. Color Research and Its Application to the Design of Instructional Materials.

    Science.gov (United States)

    Pett, Dennis; Wilson, Trudy

    1996-01-01

    Reviews color research and considers its implications for the design of instructional materials. Topics include physiological and psychological effects; color and learning, including attention, search tasks, retention and other objective measures, and non-objective measures; color and the cathode ray tube (CRT); and further research needs.…

  5. Design and Implementation of Instructional Videos for Upper-Division Undergraduate Laboratory Courses

    Science.gov (United States)

    Schmidt-McCormack, Jennifer A.; Muniz, Marc N.; Keuter, Ellie C.; Shaw, Scott K.; Cole, Renée S.

    2017-01-01

    Well-designed laboratories can help students master content and science practices by successfully completing the laboratory experiments. Upper-division chemistry laboratory courses often present special challenges for instruction due to the instrument intensive nature of the experiments. To address these challenges, particularly those associated…

  6. Metacognition and transfer within a course or instructional design rules and metacognition

    NARCIS (Netherlands)

    Vos, Henk

    2006-01-01

    A metacognitive strategy for doing research, included transfer, was taught in a course of nine afternoons. The success of this course raised some questions. How do the students learn? How does metacognition play a role? The course was designed in accordance with several instructional principles. The

  7. Elementary Students' Learning of Materials Science Practices through Instruction Based on Engineering Design Tasks

    Science.gov (United States)

    Wendell, Kristen Bethke; Lee, Hee-Sun

    2010-01-01

    Materials science, which entails the practices of selecting, testing, and characterizing materials, is an important discipline within the study of matter. This paper examines how third grade students' materials science performance changes over the course of instruction based on an engineering design challenge. We conducted a case study of nine…

  8. Fellowship Program in the Design and Development of Instructional Materials. Final Report.

    Science.gov (United States)

    Fleming, Malcolm; Pett, Dennis

    A two-year graduate program leading to a specialists's degree was administered to train individuals in the design of instructional materials for elementary, secondary, vocational and special education curricula. The program sought to achieve a multiplier effect by placing its graduates in positions in which they could help other educators to…

  9. Social Ecology and Worksite Training and Development: Introducing the Social in Instructional System Design

    Science.gov (United States)

    Weinstein, Marc G.; Shuck, Brad

    2011-01-01

    Human resource development (HRD) is recognized as an interdisciplinary field covering the breadth of behavioral and social sciences. However, since its inception, instructional systems design (ISD), a methodology widely used in the HRD field, has been based on a narrow range of behavioral science. Grounded in general system's theory, the ISD…

  10. A Comparison of Interactive Multimedia Instruction Designs Addressing Soldiers Learning Needs

    Science.gov (United States)

    2016-03-01

    animations, and if learners need such cues to support their learning (de Koning et al., 2009). If cues are overused, learners’ attention can be divided...J. P., Paas, F. (2009). Towards a framework for attention cueing in instructional animations: Guidelines for research and design. Educational...information (i.e., contextual content) than familiarization. This design strategy was selected on the basis of discussion with MCoE DOTD, who expressed a

  11. Elementary science teachers' integration of engineering design into science instruction: results from a randomised controlled trial

    Science.gov (United States)

    Maeng, Jennifer L.; Whitworth, Brooke A.; Gonczi, Amanda L.; Navy, Shannon L.; Wheeler, Lindsay B.

    2017-07-01

    This randomised controlled trial used a mixed-methods approach to investigate the frequency and how elementary teachers integrated engineering design (ED) principles into their science instruction following professional development (PD). The ED components of the PD were aligned with Cunningham and Carlsen's [(2014). Teaching engineering practices. Journal of Science Teacher Education, 25, 197-210] guidelines for ED PD and promoted inclusion of ED within science teaching. The treatment group included 219 teachers from 83 schools. Participants in the control group included 145 teachers from 60 schools in a mid-Atlantic state. Data sources, including lesson overviews and videotaped classroom observations, were analysed quantitatively to determine the frequency of ED integration and qualitatively to describe how teachers incorporated ED into instruction after attending the PD. Results indicated more participants who attended the PD (55%) incorporated ED into instruction compared with the control participants (24%), χ2(1, n = 401) = 33.225, p .05) through ED lessons. In ED lessons, students typically conducted research and created and tested initial designs. The results suggest the PD supported teachers in implementing ED into their science instruction and support the efficacy of using Cunningham and Carlsen's (2014) guidelines to inform ED PD design.

  12. DESIGNING INSTRUCTION FOR THE TRADITIONAL, ADULT, AND DISTANCE LEARNER: A New Engine for Technology-Based Teaching

    Directory of Open Access Journals (Sweden)

    Lawrence A. Tomei

    2011-10-01

    Full Text Available Adult students demand a wider variety of instructional strategies that encompass real-world, interactive, cooperative, and discovery learning experiences.Designing Instruction for the Traditional, Adult, and Distance Learner: A New Engine for Technology-Based Teaching explores how technology impacts the process of devising instructional plans as well as learning itself in adult students. Containing research from leading international experts, this publication proposes realistic and accurate archetypes to assist educators in incorporating state-of-the-art technologies into online instruction.This text proposes a new paradigm for designing, developing, implementing, and assessed technology-based instruction. It addresses three target populations of today's learner: traditional, adult, and distance education. The text proposes a new model of instructional system design (ISD for developing effective technology-based education that involves a five-step process focusing on the learner, learning theories, resources, delivery modalities, and outcomes.

  13. History of Science and Instructional Design: The Case of Electromagnetism

    Science.gov (United States)

    Seroglou, Fanny; Koumaras, Panagiotis; Tselfes, Vassilis

    , leads the research subjects to differentiate electrostatic and electrodynamic phenomena. Our proposition is to provide pupils with: a) electrostatic and magnetic experiments where they can observe the similarities and differences as Gardano and Gilbert listed them and b) electrostatic and electrodynamic tasks, inspired by Faraday''s experiments, which provide them with the opportunity to observe the same electric effects produced either by friction or by using a battery or a high-voltage supplier. The trial of these experiments in a number of individual investigations with pupils shows that educational material with strong perceptual features and a design based on certain historical experiments, actually help pupils overcome their alternative ideas.

  14. Electro fluido dynamic techniques to design instructive biomaterials for tissue engineering and drug delivery

    Energy Technology Data Exchange (ETDEWEB)

    Guarino, Vincenzo, E-mail: vguarino@unina.it; Altobelli, Rosaria; Cirillo, Valentina; Ambrosio, Luigi [Institute for Polymers, Composites and Biomaterials, Department of Chemical Sciences & Materials Technology, National Research Council of Italy, V.le Kennedy 54, Naples (Italy)

    2015-12-17

    A large variety of processes and tools is continuously investigated to discover new solutions to design instructive materials with controlled chemical, physical and biological properties for tissue engineering and drug delivery. Among them, electro fluido dynamic techniques (EFDTs) are emerging as an interesting strategy, based on highly flexible and low-cost processes, to revisit old biomaterial’s manufacturing approach by utilizing electrostatic forces as the driving force for the fabrication of 3D architectures with controlled physical and chemical functionalities to guide in vitro and in vivo cell activities. By a rational selection of polymer solution properties and process conditions, EFDTs allow to produce fibres and/or particles at micro and/or nanometric size scale which may be variously assembled by tailored experimental setups, thus giving the chance to generate a plethora of different 3D devices able to incorporate biopolymers (i.e., proteins, polysaccharides) or active molecules (e.g., drugs) for different applications. Here, we focus on the optimization of basic EFDTs - namely electrospinning, electrospraying and electrodynamic atomization - to develop active platforms (i.e., monocomponent, protein and drug loaded scaffolds and µ-scaffolds) made of synthetic (PCL, PLGA) or natural (chitosan, alginate) polymers. In particular, we investigate how to set materials and process parameters to impart specific morphological, biochemical or physical cues to trigger all the fundamental cell–biomaterial and cell– cell cross-talking elicited during regenerative processes, in order to reproduce the complex microenvironment of native or pathological tissues.

  15. Electro fluido dynamic techniques to design instructive biomaterials for tissue engineering and drug delivery

    International Nuclear Information System (INIS)

    Guarino, Vincenzo; Altobelli, Rosaria; Cirillo, Valentina; Ambrosio, Luigi

    2015-01-01

    A large variety of processes and tools is continuously investigated to discover new solutions to design instructive materials with controlled chemical, physical and biological properties for tissue engineering and drug delivery. Among them, electro fluido dynamic techniques (EFDTs) are emerging as an interesting strategy, based on highly flexible and low-cost processes, to revisit old biomaterial’s manufacturing approach by utilizing electrostatic forces as the driving force for the fabrication of 3D architectures with controlled physical and chemical functionalities to guide in vitro and in vivo cell activities. By a rational selection of polymer solution properties and process conditions, EFDTs allow to produce fibres and/or particles at micro and/or nanometric size scale which may be variously assembled by tailored experimental setups, thus giving the chance to generate a plethora of different 3D devices able to incorporate biopolymers (i.e., proteins, polysaccharides) or active molecules (e.g., drugs) for different applications. Here, we focus on the optimization of basic EFDTs - namely electrospinning, electrospraying and electrodynamic atomization - to develop active platforms (i.e., monocomponent, protein and drug loaded scaffolds and µ-scaffolds) made of synthetic (PCL, PLGA) or natural (chitosan, alginate) polymers. In particular, we investigate how to set materials and process parameters to impart specific morphological, biochemical or physical cues to trigger all the fundamental cell–biomaterial and cell– cell cross-talking elicited during regenerative processes, in order to reproduce the complex microenvironment of native or pathological tissues

  16. Electro fluido dynamic techniques to design instructive biomaterials for tissue engineering and drug delivery

    Science.gov (United States)

    Guarino, Vincenzo; Altobelli, Rosaria; Cirillo, Valentina; Ambrosio, Luigi

    2015-12-01

    A large variety of processes and tools is continuously investigated to discover new solutions to design instructive materials with controlled chemical, physical and biological properties for tissue engineering and drug delivery. Among them, electro fluido dynamic techniques (EFDTs) are emerging as an interesting strategy, based on highly flexible and low-cost processes, to revisit old biomaterial's manufacturing approach by utilizing electrostatic forces as the driving force for the fabrication of 3D architectures with controlled physical and chemical functionalities to guide in vitro and in vivo cell activities. By a rational selection of polymer solution properties and process conditions, EFDTs allow to produce fibres and/or particles at micro and/or nanometric size scale which may be variously assembled by tailored experimental setups, thus giving the chance to generate a plethora of different 3D devices able to incorporate biopolymers (i.e., proteins, polysaccharides) or active molecules (e.g., drugs) for different applications. Here, we focus on the optimization of basic EFDTs - namely electrospinning, electrospraying and electrodynamic atomization - to develop active platforms (i.e., monocomponent, protein and drug loaded scaffolds and µ-scaffolds) made of synthetic (PCL, PLGA) or natural (chitosan, alginate) polymers. In particular, we investigate how to set materials and process parameters to impart specific morphological, biochemical or physical cues to trigger all the fundamental cell-biomaterial and cell- cell cross-talking elicited during regenerative processes, in order to reproduce the complex microenvironment of native or pathological tissues.

  17. Applied CAL on Problem Based Learning Using Gagne’s Instructional Design

    Directory of Open Access Journals (Sweden)

    Sri Sundari Purbohadi

    2014-10-01

    Full Text Available Abstract— In the Problem-Based Learning (PBL model, students are expected to study independently. One of the methods that can improve the ability or skill of learners is using Computer Assisted Learning (CAL. Implementation of CAL in PBL should be able to create Self-Directed Learning (SDL culture through appropriate instructional design and interesting modules. In this paper, the CAL software is developed using multimedia learning principles, convenient appearance, and user-friendly navigation. The CAL’s learning content is designed using Gagne's instructional design. The experiment proved the CAL was able to give effect size 0.89 and developed self-directed learning culture. From the interviews, students were very glad and interested to use the CAL modules because they can learn anytime and can reach the course objectives without a lecturer.

  18. Radiological containment selection, design, and specification guide

    International Nuclear Information System (INIS)

    Brown, R.L.

    1994-01-01

    This document provides guidance to Tank Waste Remediation Systems personnel in determining what containment is appropriate for work activities, what containments are available, general applications of each, design criteria, and other information needed to make informed decisions concerning containment application

  19. Design Specifications for Adaptive Real-Time Systems

    Science.gov (United States)

    1991-12-01

    TICfl \\ E CT E Design Specifications for JAN’\\ 1992 Adaptive Real - Time Systems fl Randall W. Lichota U, Alice H. Muntz - December 1991 \\ \\\\/ 0 / r...268-2056 Technical Report CMU/SEI-91-TR-20 ESD-91-TR-20 December 1991 Design Specifications for Adaptive Real - Time Systems Randall W. Lichota Hughes...Design Specifications for Adaptive Real - Time Systems Abstract: The design specification method described in this report treats a software

  20. Reprogrammable Controller Design From High-Level Specification

    Directory of Open Access Journals (Sweden)

    M. Benmohammed

    2003-10-01

    Full Text Available Existing techniques in high-level synthesis mostly assume a simple controller architecture model in the form of a single FSM. However, in reality more complex controller architectures are often used. On the other hand, in the case of programmable processors, the controller architecture is largely defined by the available control-flow instructions in the instruction set. With the wider acceptance of behavioral synthesis, the application of these methods for the design of programmable controllers is of fundamental importance in embedded system technology. This paper describes an important extension of an existing architectural synthesis system targeting the generation of ASIP reprogrammable architectures. The designer can then generate both style of architecture, hardwired and programmable, using the same synthesis system and can quickly evaluate the trade-offs of hardware decisions.

  1. Professionality of Junior High School (SMP) Science Teacher in Preparing Instructional Design of Earth and Space Sciences (IPBA)

    Science.gov (United States)

    Marlina, L.; Liliasari; Tjasyono, B.; Hendayana, S.

    2017-02-01

    The teacher is one important factor in the provision of education in schools. Therefore, improving the quality of education means we need to enhance the quality and the professionalism of teachers. We offer a solution through education and training of junior high school science teachers in developing the instructional design of Earth and Space Sciences (IPBA). IPBA is part of the science subjects which is given to students from elementary school to college. This research is a preliminary study of junior high school science teacher professionalism in creating instructional design IPBA. Mixed method design is used to design the research. Preliminary studies conducted on junior high school science teacher in one MGMPs in South Sumatera, and the respondent are 18 teachers from 13 schools. The educational background of science teachers who teach IPBA not only from physical education but also biology and agriculture. The result of preliminary study showed that the ratio of teachers who teach IPBA are 56% from physic education, 39% from biology, and 5% from agriculture. The subjects of IPBA that considered difficult by teachers are the distribution of sun, moon, and satellite motion; specific processes in lithosphere and atmosphere; and the correlation between lithosphere and atmosphere with the environment. The teachers also face difficulty in preparing media, choosing the right methods in teaching IPBA.

  2. Improving listening comprehension skills relying on metacognitive strategies - focus on vocabulary and specific l2 instruction

    Directory of Open Access Journals (Sweden)

    Jerotijević-Tišma Danica

    2016-01-01

    Full Text Available The present paper aims at investigating the application of an instructional method specifically focused on the expansion of metacognitive awareness and its effect on Serbian EFL students’ listening comprehension. The current study is a follow-up research of a similar study by Vandergrift and Tafaghodtari (2010. However, we sought to expand the previous research by investigating the relationship between the students’ current level of L2 (target language vocabulary and listening test scores. Our study likewise differed in the sample of participants, the target language, teaching and testing material used, and the duration of the very experiment. To answer the proposed research questions we conducted an experiment with 57 Serbian secondary school EFL (English as a Foreign Language learners divided into experimental (n=27 and control group (n=30. The results of the pre- and post-tests of the two groups showed the beneficial effects of developing metacognitive strategies and the strong positive correlation between the level of vocabulary and listening comprehension. The paper underlines important pedagogical implications especially regarding the enhancement of metacognitive awareness and vocabulary proficiency of students in order to improve performance on listening comprehension tasks.

  3. Instructional design in mathematics for undergraduate students based on learning by mistakes approach utilizing scilab assistance

    Science.gov (United States)

    Kartika, H.

    2018-03-01

    The issue related to making mistake while learning such as negative emotion is found while students learn mathematics with the aid of a computer. When the computer output showed a mistake message, the students considered it as a computer software malfunction. Based on this issue, the writer designs an instructional model based on learning by mistake approach and which is Scilab assisted. The method used in this research is research design involving undergraduate students in matrix algebra courses. The data collected throught survey with questionnaire to gain feedback about the approach implemented. The data analyzed using quantitative descriptive. The instructional design proposed is the student act as a mistake corrector while the teacher acts as a mistake maker. Teacher deliberately makes mistakes with the help of Scilab software. On the other hand, students correct, analyze and explain errors resulting from Scilab software. The result of this research is an ICT based instructional design which is expected to be applicable as an alternative learning in directing students to think positively about mistakes in learning. Furthermore, students are also expected to improve their ability in understanding and thinking critically while solving problems and improving themselves in learning mathematics.

  4. The Experimental Research on E-Learning Instructional Design Model Based on Cognitive Flexibility Theory

    Science.gov (United States)

    Cao, Xianzhong; Wang, Feng; Zheng, Zhongmei

    The paper reports an educational experiment on the e-Learning instructional design model based on Cognitive Flexibility Theory, the experiment were made to explore the feasibility and effectiveness of the model in promoting the learning quality in ill-structured domain. The study performed the experiment on two groups of students: one group learned through the system designed by the model and the other learned by the traditional method. The results of the experiment indicate that the e-Learning designed through the model is helpful to promote the intrinsic motivation, learning quality in ill-structured domains, ability to resolve ill-structured problem and creative thinking ability of the students.

  5. An Instructional Design Framework to Improve Student Learning in a First-Year Engineering Class

    Directory of Open Access Journals (Sweden)

    Kumar Yelamarthi

    2016-12-01

    Full Text Available Increasingly, numerous universities have identified benefits of flipped learning environments and have been encouraging instructors to adapt such methodologies in their respective classrooms, at a time when departments are facing significant budget constraints. This article proposes an instructional design framework utilized to strategically enhance traditional flipped methodologies in a first-year engineering course, by using low-cost technology aids and proven pedagogical techniques to enhance student learning. Implemented in a first-year engineering course, this modified flipped model demonstrated an improved student awareness of essential engineering concepts and improved academic performance through collaborative and active learning activities, including flipped learning methodologies, without the need for expensive, formal active learning spaces. These findings have been validated through two studies and have shown similar results confirming that student learning is improved by the implementation of multi-pedagogical strategies in-formed by the use of an instructional design in a traditional classroom setting.

  6. Cognitive Tutoring based on Intelligent Decision Support in the PENTHA Instructional Design Model

    Science.gov (United States)

    dall'Acqua, Luisa

    2010-06-01

    The research finality of this paper is how to support Authors to develop rule driven—subject oriented, adaptable course content, meta-rules—representing the disciplinary epistemology, model of teaching, Learning Path structure, and assessment parameters—for intelligent Tutoring actions in a personalized, adaptive e-Learning environment. The focus is to instruct the student to be a decision manager for himself, able to recognize the elements of a problem, select the necessary information with the perspective of factual choices. In particular, our research intends to provide some fundamental guidelines for the definition of didactical rules and logical relations, that Authors should provide to a cognitive Tutoring system through the use of an Instructional Design method (PENTHA Model) which proposes an educational environment, able to: increase productivity and operability, create conditions for a cooperative dialogue, developing participatory research activities of knowledge, observations and discoveries, customizing the learning design in a complex and holistic vision of the learning / teaching processes.

  7. A Review of What Instructional Designers Do: Questions Answered and Questions Not Asked

    Directory of Open Access Journals (Sweden)

    Richard Kenny

    2005-02-01

    Full Text Available The purpose of this literature review was to determine what evidence there is that instructional designers apply ID Models, as well as to establish what other activities and processes they might use in their professional activities. Only ten articles were located that directly pertained to this topic: seven reporting on empirical research and three case descriptions recounting development experiences. All ten papers pertained to process-based ID models. Results showed that, while instructional designers apparently do make use of process-based ID models, they do not spend the majority of their time working with them nor do they follow them in a rigid fashion. They also engage in a wide variety of other tasks that are not reflected in ID models.

  8. Conceptual TRU waste container design specifications

    International Nuclear Information System (INIS)

    Doty, J.W.; Peterson, J.B.

    1978-01-01

    A contractor questionnaire was used to gather pertinent data. Site visits were made to formulate an integrated contractor consensus; a packaging meeting was held to examine, discuss, and integrate packaging philosophies; and data collected from these activities and from Task Force meetings were consolidated to provide input to the Basic Application Checklist and Criteria Checklists. Conceptual Design Criteria were developed from an analysis and evaluation of the application data against federal regulations and interim/terminal storage constraints

  9. Gaming the System: Video Games as a Theoretical Framework for Instructional Design

    OpenAIRE

    Beatty, Ian D.

    2014-01-01

    In order to facilitate analyzing video games as learning systems and instructional designs as games, we present a theoretical framework that integrates ideas from a broad range of literature. The framework describes games in terms of four layers, all sharing similar structural elements and dynamics: a micro-level game focused on immediate problem-solving and skill development, a macro-level game focused on the experience of the game world and story and identity development, and two meta-level...

  10. Application of Instructional Design Principles in Developing an Online Information Literacy Curriculum.

    Science.gov (United States)

    Mi, Misa

    2016-01-01

    An online information literacy curriculum was developed as an intervention to engage students in independent study and self-assessment of their learning needs and learning outcomes, develop proficiency in information skills, and foster lifelong learning. This column demonstrates how instructional design principles were applied to create the learning experiences integrated into various courses of the medical curriculum to promote active learning of information skills and maximize self-directed learning outcomes for lifelong learning.

  11. To argumentate in quantum physics. Instruction-specific argumentation aids; Argumentieren in der Quantenphysik. Unterrichtsspezifische Argumentationshilfen

    Energy Technology Data Exchange (ETDEWEB)

    Friege, Gunnar; Scholz, Ruediger (eds.)

    2017-07-01

    In this book aids for the instruction of quantum physics are described. Especially considered are the conception of the photon, quantum interference, entanglement, the photoelectric effect, and coincidence experiments. (HSI)

  12. [Participants-centered Design of Annual Meeting: From the Perspectives of Instructional Systems].

    Science.gov (United States)

    Suzuki, Katsuaki

    2018-01-01

     This paper examines the reform experience of the 10th Annual Meeting of the Japanese Society for Pharmaceutical Palliative Care and Sciences from Instructional Systems perspectives, to check whether it was effective, efficient, and appealing for participants. "Instructional Systems" has been a research area in educational technology for the past 50 years, and has also been applied to training and human resource development in healthcare domains. If an annual meeting is to be designed for participants' learning, then perspectives of Instructional Systems can be applied to interpret the effort of the reform. First, fill in the gaps of participants' knowledge, using before-and-after comparison. Design a conference to meet the needs of its participants by checking why they attend (expectations) and what they bring in (starting status). Second, design the conference as a process of innovation. The bigger the expected changes, the more carefully participants should be prepared to accommodate them. Third, follow plan-do-check-action cycles with data for confirming and revising the new ways of running the meeting. Plan to check "exportability" of the new ways, to assess whether it can be generalized to future meetings.

  13. A Classification Model and an Open E-Learning System Based on Intuitionistic Fuzzy Sets for Instructional Design Concepts

    Science.gov (United States)

    Güyer, Tolga; Aydogdu, Seyhmus

    2016-01-01

    This study suggests a classification model and an e-learning system based on this model for all instructional theories, approaches, models, strategies, methods, and technics being used in the process of instructional design that constitutes a direct or indirect resource for educational technology based on the theory of intuitionistic fuzzy sets…

  14. FPGA fabric specific optimization for RLT design

    International Nuclear Information System (INIS)

    Perwaiz, A.; Khan, S.A.

    2010-01-01

    This paper proposes a technique custom to the optimization requirements suited for a particular family of Field Programmable Gate Arrays (FPGAs). As FPGAs have introduced re configurable black boxes there is a need to perform optimization across FPGAs slice fabric in order to achieve optimum performance. Though the Register Transfer Level (RTL) Hardware Descriptive Language (HDL) code should be technology independent but in many design instances it is imperative to understand the target technology especially once the target device embeds dedicated arithmetic blocks. No matter what the degree of optimization of the algorithm is, the configuration of target device plays an important role as far as the device utilization and path delays are concerned Index Terms: Field Programmable Gate Arrays (FPGA), Compression Tree, Bit Width Reduction, Look Ahead Pipelining. (author)

  15. Using innovative instructional technology to meet training needs in public health: a design process.

    Science.gov (United States)

    Millery, Mari; Hall, Michelle; Eisman, Joanna; Murrman, Marita

    2014-03-01

    Technology and distance learning can potentially enhance the efficient and effective delivery of continuing education to the public health workforce. Public Health Training Centers collaborate with instructional technology designers to develop innovative, competency-based online learning experiences that meet pressing training needs and promote best practices. We describe one Public Health Training Center's online learning module design process, which consists of five steps: (1) identify training needs and priority competencies; (2) define learning objectives and identify educational challenges; (3) pose hypotheses and explore innovative, technology-based solutions; (4) develop and deploy the educational experience; and (5) evaluate feedback and outcomes to inform continued cycles of revision and improvement. Examples illustrate the model's application. These steps are discussed within the context of design practices in the fields of education, engineering, and public health. They incorporate key strategies from across these fields, including principles of programmatic design familiar to public health professionals, such as backward design. The instructional technology design process we describe provides a structure for the creativity, collaboration, and systematic strategies needed to develop online learning products that address critical training needs for the public health workforce.

  16. The Hierarchical Specification and Mechanical Verification of the SIFT Design

    Science.gov (United States)

    1983-01-01

    The formal specification and proof methodology employed to demonstrate that the SIFT computer system meets its requirements are described. The hierarchy of design specifications is shown, from very abstract descriptions of system function down to the implementation. The most abstract design specifications are simple and easy to understand, almost all details of the realization were abstracted out, and are used to ensure that the system functions reliably and as intended. A succession of lower level specifications refines these specifications into more detailed, and more complex, views of the system design, culminating in the Pascal implementation. The section describes the rigorous mechanical proof that the abstract specifications are satisfied by the actual implementation.

  17. Implications of Two Well-Known Models for Instructional Designers in Distance Education: Dick-Carey versus Morrison-Ross-Kemp

    Science.gov (United States)

    Akbulut, Yavuz

    2007-01-01

    This paper first summarizes, and then compares and contrasts two well-known instructional design models: Dick and Carey Model (DC) and Morrison, Ross and Kemp model (MRK). The target audiences of both models are basically instructional designers. Both models have applications for different instructional design settings. They both see the…

  18. Transit safety retrofit package development : architecture and design specifications.

    Science.gov (United States)

    2014-05-01

    The Architecture and Design Specifications capture the TRP system architecture and design that fulfills the technical : objectives stated in the TRP requirements document. : The document begins with an architectural overview that identifies and descr...

  19. Measuring lip force by oral screens Part 2: The importance of screen design, instruction and suction.

    Science.gov (United States)

    Wertsén, Madeleine; Stenberg, Manne

    2017-10-01

    The aim of this study was to find a reliable method for measuring lip force and to find the most important factors that influence the measurements in terms of magnitude and variability. The hypothesis tested was that suction is involved and thus the instruction and the design of the oral screen are of importance when measuring lip force. This is a methodological study in a healthy population. This study was conducted in a general community. The designs of the screens were soft and hard prefabricated screens and 2 semi-individually made with a tube allowing air to pass. The screens and the instructions squeeze or suck were tested on 29 healthy adults, one at a time and on 4 occasions. The test order of the screens was randomized. Data were collected during 4 consecutive days, and the procedure was repeated after 1 month. The participants were 29 healthy adult volunteers. The instruction was an important mean to distinguish between squeezing and sucking. The design of the screen affected the lip force so that it increases in relation to the projected area of the screen. A screen design with a tube allowing air to pass made it possible to avoid suction when squeezing. By measuring with and without allowing air to pass, it was possible to distinguish between suction related and not suction related lip force. The additional screen pressure when sucking was related to the ability to produce a negative intraoral pressure. In conclusion lip force increases in relation to the projected area of the screen, sucking generally increases the measured lip force and the additional screen pressure when sucking is related to the ability to produce a negative intraoral pressure.

  20. A Multi-Institutional Project to Develop Discipline-Specific Data Literacy Instruction for Graduate Students

    Science.gov (United States)

    Wright, S. J.; Fosmire, M.; Jeffryes, J.; Stowell Bracke, M.; Westra, B.

    2012-12-01

    What data stewardship skills are needed by future scientists to fulfill their professional responsibilities and take advantage of opportunities in e-science? How can academic librarians contribute their expertise in information organization, dissemination and preservation to better serve modern science? With support from the Institute of Museum and Library Services (IMLS), four research libraries have formed a partnership to address these questions. The aims of the partnership are to identify the data stewardship skills, including data management and curation, needed by graduate students at the research discipline level, to identify trends that extend across the Science, Technology, Engineering, and Mathematics (STEM) disciplines, and to collaborate with faculty to develop and implement "data information literacy" (DIL) curricula to address those needs. Over the course of the first year, the authors have been working closely with faculty in hydrology, civil engineering, ecology/environmental science, and natural resources. At the outset, we performed structured interviews with faculty and graduate students using a modified version of the Data Curation Profiles Toolkit (http://datacurationprofiles.org) to gather detailed information about the practices, limitations, needs, and opportunities for improving data management and curation practices in each group. Project teams also conducted discipline-based literature reviews and environmental scans of the available resources pertaining to data management and curation issues to identify how (or if) these topics are currently addressed by the discipline. The results were used to develop and implement specific instructional interventions attuned to the needs of each research group. We will share the results of our interviews and information-gathering, summarizing similarities and differences in the data stewardship needs expressed by the graduate students and faculty from different STEM disciplines. We will also discuss

  1. Site Specific Waste Management Instructions for loading and shipment of category 3 investigation derived waste to ERDF

    International Nuclear Information System (INIS)

    Corriveau, C.E.; Wolf, D.M.

    1996-08-01

    This Site Specific Waste Management Instruction (SSWMI) provides guidance for management of containerized investigation-derived waste being loaded and transported to the Environmental Restoration Disposal Facility. The SSWMI outlines the waste management practices that will be performed in the field to implement federal, state, and US Department of Energy requirements. Additional guidance for waste packaging, marking, labeling and shipping is provided (US DOT rules in 49 CFR have precedence)

  2. Instructional Design to Measure the Efficacy of Interactive E-Books in A High School Setting

    Directory of Open Access Journals (Sweden)

    Maria Victoria PABRUA BATOON

    2018-04-01

    Full Text Available This article describes a qualitative research analysis on the implementation of interactive e-books in high school courses using a case study approach. The subjects of the study included seven professors and 16 freshmen who were surveyed and interviewed with a questionnaire designed according to the Kemp Model of Instructional Design. The study revealed that participants use interactive e-books as a technological educational resource. The professors pointed out that the design of the interactive e-books helped students develop essential learning skills: technological ability, reading and writing skills, as well as cognition and metacognition abilities. Furthermore, the students noted that the use of interactive e-books has a positive effect on their grades due to its high audio and visual contents. However, the students indicated that they were allured to chat, to play or to navigate in their mobile device while they were using it. Finally, this study can contribute to the relative knowledge about the use of mobile technology in education, as well as, it aids the professor to make a reflection about the Instructional Design of the educational technological resources used in the classroom to promote better result in the process of learning.

  3. Instructional Design "Postpartum Fitness” for Midwife Staff of Shemiranat (Tehran, Iran Health Network

    Directory of Open Access Journals (Sweden)

    Rita Rahmati Roodsari

    2018-01-01

    Full Text Available Background: One of the postpartum cares lives is supporting and encouraging them more to exercise after delivery and monitoring them. Health care workers, particularly midwives have a great role in the promotion of sport activity. Purpose of this study is Designed training for "postpartum fitness" by Roth well approach for midwives at health network in Shemiranat.Materials and Methods: This research is kind of Instructional design. Sampling was done by using census method Data collection was done by multiple choice tests for knowledge and attitudes of questionnaire and practical assessment exercise was part. After assessment and instructional design and was done Roth well model and Ganyh strategies.Results: Average response to questions in the cognitive domain was 49%. In this study 92% of the employees have positive attitude to importance and impact of the study. The result of the data related to the workplace of participants is health centers (53.3%. Most frequency is for who has less than 5 years’ work experience (50%and most frequency is for official staff (43.3%, most educational level related to bachelors (83.3% and the highest age rate is between 30-40 years old (40%.Conclusion: Positive attitude towards this issue and earn score below %80 indicates a need for staff to learn and raise awareness about the above topic. Create knowledge, training, counseling mothers about this issue are the midwife duties. This reflects a greater emphasis on design education.

  4. Computer Instruction in Handwriting, Spelling, and Composing for Students with Specific Learning Disabilities in Grades 4 to 9.

    Science.gov (United States)

    Berninger, Virginia W; Nagy, William; Tanimoto, Steve; Thompson, Rob; Abbott, Robert D

    2015-02-01

    Effectiveness of iPad computerized writing instruction was evaluated for 4 th to 9 th graders ( n =35) with diagnosed specific learning disabilities (SLDs) affecting writing: dysgraphia (impaired handwriting), dyslexia (impaired spelling), and oral and written language learning disability (OWL LD) (impaired syntax composing). Each of the 18 two-hour lessons had multiple learning activities aimed at improving subword - (handwriting), word - (spelling), and syntax - (sentence composing) level language skills by engaging all four language systems (listening, speaking, reading, and writing) to create a functional writing system. To evaluate treatment effectiveness, normed measures of handwriting, spelling, and composing were used with the exception of one non-normed alphabet writing task. Results showed that the sample as a whole improved significantly from pretest to posttest in three handwriting measures, four spelling measures, and both written and oral syntax construction measures. All but oral syntax was evaluated with pen and paper tasks, showing that the computer writing instruction transferred to better writing with pen and paper. Performance on learning activities during instruction correlated with writing outcomes; and individual students tended to improve in the impaired skill associated with their diagnosis. Thus, although computers are often used in upper elementary school and middle school in the United States (US) for accommodations (alternatives to pen and paper) for students with persisting SLDs affecting writing, this study shows computers can also be used for Tier 3 instruction to improve the writing skills of students in grades 4 to 9 with history of persisting writing disabilities.

  5. Computer Instruction in Handwriting, Spelling, and Composing for Students with Specific Learning Disabilities in Grades 4 to 9

    Science.gov (United States)

    Berninger, Virginia W.; Nagy, William; Tanimoto, Steve; Thompson, Rob; Abbott, Robert D.

    2014-01-01

    Effectiveness of iPad computerized writing instruction was evaluated for 4th to 9th graders (n=35) with diagnosed specific learning disabilities (SLDs) affecting writing: dysgraphia (impaired handwriting), dyslexia (impaired spelling), and oral and written language learning disability (OWL LD) (impaired syntax composing). Each of the 18 two-hour lessons had multiple learning activities aimed at improving subword- (handwriting), word- (spelling), and syntax- (sentence composing) level language skills by engaging all four language systems (listening, speaking, reading, and writing) to create a functional writing system. To evaluate treatment effectiveness, normed measures of handwriting, spelling, and composing were used with the exception of one non-normed alphabet writing task. Results showed that the sample as a whole improved significantly from pretest to posttest in three handwriting measures, four spelling measures, and both written and oral syntax construction measures. All but oral syntax was evaluated with pen and paper tasks, showing that the computer writing instruction transferred to better writing with pen and paper. Performance on learning activities during instruction correlated with writing outcomes; and individual students tended to improve in the impaired skill associated with their diagnosis. Thus, although computers are often used in upper elementary school and middle school in the United States (US) for accommodations (alternatives to pen and paper) for students with persisting SLDs affecting writing, this study shows computers can also be used for Tier 3 instruction to improve the writing skills of students in grades 4 to 9 with history of persisting writing disabilities. PMID:25378768

  6. Instruction to Help Young Children Develop Language and Literacy Skills: The Roles of Program Design and Instructional Guidance

    Science.gov (United States)

    Gunn, Barbara; Vadasy, Patricia; Smolkowski, Keith

    2011-01-01

    This article discusses the kinds of instructional activities that young children need to develop basic language and literacy skills based on recent research and program evaluations. This includes approaches to develop alphabetic understanding, phonological awareness, vocabulary, and oral language. Activities and materials from the Pre-kindergarten…

  7. A Design-Based Research Case Study Documenting a Constructivist ID Process and Instructional Solution for a Cross-Cultural Workforce

    Science.gov (United States)

    Tracey, Monica W.; Unger, Kelly L.

    2012-01-01

    As the need for instructing a globalized workforce increases, instructional designers must embrace the constraints and the opportunities these projects provide in order to move the field of cross-cultural instructional design (ID) forward. Cross-cultural projects offer multiple avenues for growth in ID practice, overcoming cultural barriers, and a…

  8. Instructional design in the development of an online course on Basic Life Support.

    Science.gov (United States)

    Tobase, Lucia; Peres, Heloisa Helena Ciqueto; Almeida, Denise Maria de; Tomazini, Edenir Aparecida Sartorelli; Ramos, Meire Bruna; Polastri, Thatiane Facholi

    2018-03-26

    To develop and evaluate an online course on Basic Life Support. Technological production research of online course guided by the ADDIE (Analysis, Design, Development, Implementation, Evaluation) instructional design model based on Andragogy and the Meaningful Learning Theory. The online course was constructed in the platform Moodle, previously assessed by a group of experts, and then presented to the students of the Nursing School of the University of São Paulo, who assessed it at the end of the course. The course was evaluated by the experts and obtained a mean score of 0.92 (SD 0.15), considered as good quality (between 0.90-0.94), and by the students, with a mean score of 0.95 (SD 0.03), considered as high quality (0.95-1.00). The instructional design used was found to be appropriate to the development of the online course. As an active educational strategy, it contributed to the learning on Basic Life Support during cardiac arrest-related procedures in adults. In view of the need for technological innovations in education and systematization of care in cardiopulmonary resuscitation, the online course allows the establishment of continuous improvement processes in the quality of resuscitation in the care provided by students and professionals.

  9. Instructional design in the development of an online course on Basic Life Support

    Directory of Open Access Journals (Sweden)

    Lucia Tobase

    2018-03-01

    Full Text Available ABSTRACT Objective To develop and evaluate an online course on Basic Life Support. Method Technological production research of online course guided by the ADDIE (Analysis, Design, Development, Implementation, Evaluation instructional design model based on Andragogy and the Meaningful Learning Theory. The online course was constructed in the platform Moodle, previously assessed by a group of experts, and then presented to the students of the Nursing School of the University of São Paulo, who assessed it at the end of the course. Results The course was evaluated by the experts and obtained a mean score of 0.92 (SD 0.15, considered as good quality (between 0.90-0.94, and by the students, with a mean score of 0.95 (SD 0.03, considered as high quality (0.95-1.00. Conclusion The instructional design used was found to be appropriate to the development of the online course. As an active educational strategy, it contributed to the learning on Basic Life Support during cardiac arrest-related procedures in adults. In view of the need for technological innovations in education and systematization of care in cardiopulmonary resuscitation, the online course allows the establishment of continuous improvement processes in the quality of resuscitation in the care provided by students and professionals.

  10. Wicked ID: Conceptual Framework for Considering Instructional Design as a Wicked Problem

    Directory of Open Access Journals (Sweden)

    Katrin Becker

    2007-02-01

    Full Text Available The process of instructional design has parallels in other design disciplines. Software design is one that has experienced intense attention in the last 30 or so years, and many lessons learned there can be applied to ID. Using software design as a springboard, this concept paper seeks to propose a new approach to ID. It suggests that instructional design is almost always a Wicked Problem. The connection is formed between Wicked Problems as first described by Rittel and Webber in 1973, and the models in and processes of instructional design. The areas of social planning, organizational management and software design all posses some accepted and tested approaches to the solution of Wicked Problems. These will be described, and how they can be applied to ID will be explained. Finally, this paper will propose a meta-model for ID and explain how it can be used in the current context. Résumé : Le processus de conception pédagogique a des similitudes avec d’autres disciplines. La conception de logiciels a fait l’objet d’une grande attention dans les trente dernières années et de nombreuses leçons tirées peuvent s’appliquer à la conception pédagogique. En se basant sur la conception de logiciels, cet article cherche à proposer une nouvelle méthode à la conception pédagogique. Il laisse entendre que la conception pédagogique constitue presque toujours un problème épineux. Le lien est formé entre les problèmes épineux tels que décrits par Rittel et Webber en 1973 et les modèles et processus de la conception pédagogique. Les secteurs de l’organisation sociale, de la gestion des organisations et de la conception de logiciels comptent des méthodes acceptées et validées à la résolution de problèmes épineux. Nous les décrirons et expliquerons comment ils peuvent servir à la conception pédagogique. Enfin, l’article proposera un meta-modèle de la conception pédagogique et expliquera comment il peut servir dans le

  11. Improvement of Organizational Performance and Instructional Design: An Analogy Based on General Principles of Natural Information Processing Systems

    Science.gov (United States)

    Darabi, Aubteen; Kalyuga, Slava

    2012-01-01

    The process of improving organizational performance through designing systemic interventions has remarkable similarities to designing instruction for improving learners' performance. Both processes deal with subjects (learners and organizations correspondingly) with certain capabilities that are exposed to novel information designed for producing…

  12. Designing Epigenome Editors: Considerations of Biochemical and Locus Specificities.

    Science.gov (United States)

    Sen, Dilara; Keung, Albert J

    2018-01-01

    The advent of locus-specific protein recruitment technologies has enabled a new class of studies in chromatin biology. Epigenome editors enable biochemical modifications of chromatin at almost any specific endogenous locus. Their locus specificity unlocks unique information including the functional roles of distinct modifications at specific genomic loci. Given the growing interest in using these tools for biological and translational studies, there are many specific design considerations depending on the scientific question or clinical need. Here we present and discuss important design considerations and challenges regarding the biochemical and locus specificities of epigenome editors. These include how to account for the complex biochemical diversity of chromatin; control for potential interdependency of epigenome editors and their resultant modifications; avoid sequestration effects; quantify the locus specificity of epigenome editors; and improve locus specificity by considering concentration, affinity, avidity, and sequestration effects.

  13. Instructions for submittal and control of FFTF design documents and design related documentation

    International Nuclear Information System (INIS)

    Grush, R.E.

    1976-10-01

    This document provides the system and requirements for management of FFTF technical data prepared by Westinghouse Hanford (HEDL), and design contractors, the construction contractor and lower tier equipment suppliers. Included in this document are provisions for the review, approval, release, change control, and accounting of FFTF design disclosure and base documentation. Also included are provisions for submittal of other design related documents for review and approval consistent with applicable requirements of RDT-Standard F 2-2, ''Quality Assurance Program Requirements.''

  14. Developing Elementary Math and Science Process Skills Through Engineering Design Instruction

    Science.gov (United States)

    Strong, Matthew G.

    This paper examines how elementary students can develop math and science process skills through an engineering design approach to instruction. The performance and development of individual process skills overall and by gender were also examined. The study, preceded by a pilot, took place in a grade four extracurricular engineering design program in a public, suburban school district. Students worked in pairs and small groups to design and construct airplane models from styrofoam, paper clips, and toothpicks. The development and performance of process skills were assessed through a student survey of learning gains, an engineering design packet rubric (student work), observation field notes, and focus group notes. The results indicate that students can significantly develop process skills, that female students may develop process skills through engineering design better than male students, and that engineering design is most helpful for developing the measuring, suggesting improvements, and observing process skills. The study suggests that a more regular engineering design program or curriculum could be beneficial for students' math and science abilities both in this school and for the elementary field as a whole.

  15. Instructional design strategies for developing an interactive video educational program for pregnant teens: a pilot study.

    Science.gov (United States)

    Levenson, P M; Morrow, J R; Smith, P

    1984-01-01

    One hundred forty-six teens attending an urban maternity hospital's prenatal clinic completed a questionnaire designed to assist in the development of educational programs utilizing computer-assisted television instruction or interactive video. Ninety-five percent of the teens agreed that additional information about desirable health behaviors during pregnancy would be helpful. Forty-six percent preferred obtaining information from a health professional at the hospital. Although 90% said that the race of the narrator for a film show was unimportant, responses regarding racial preference corresponded to the racial distribution of participants. Seventy-six percent of the teens preferred the narrator to be younger than 35 years of age, and 54% preferred a female narrator. Race was associated with video game experiences, preferences about the narrator's age and race, and favorite television shows. Age was not associated with responses to any of the questions. Although only 19% had ever used a computer, 98% stated they would like to try a computer with assistance. More than half (55%) knew how to type and 83% had played video games; of those who had played video games, 93% said they enjoyed doing so. Eighty-three percent of the respondents always or sometimes enjoyed cartoons. Favorite television shows and cartoon characters were identified. The design implications of the teens' preferences to the development of instruction using computers coupled with other emerging technologies are discussed.

  16. Towards the design of 3D multiscale instructive tissue engineering constructs: Current approaches and trends.

    Science.gov (United States)

    Oliveira, Sara M; Reis, Rui L; Mano, João F

    2015-11-01

    The design of 3D constructs with adequate properties to instruct and guide cells both in vitro and in vivo is one of the major focuses of tissue engineering. Successful tissue regeneration depends on the favorable crosstalk between the supporting structure, the cells and the host tissue so that a balanced matrix production and degradation are achieved. Herein, the major occurring events and players in normal and regenerative tissue are overviewed. These have been inspiring the selection or synthesis of instructive cues to include into the 3D constructs. We further highlight the importance of a multiscale perception of the range of features that can be included on the biomimetic structures. Lastly, we focus on the current and developing tissue-engineering approaches for the preparation of such 3D constructs: top-down, bottom-up and integrative. Bottom-up and integrative approaches present a higher potential for the design of tissue engineering devices with multiscale features and higher biochemical control than top-down strategies, and are the main focus of this review. Copyright © 2015 Elsevier Inc. All rights reserved.

  17. Surgeon Design Interface for Patient-Specific Concentric Tube Robots.

    Science.gov (United States)

    Morimoto, Tania K; Greer, Joseph D; Hsieh, Michael H; Okamura, Allison M

    2016-06-01

    Concentric tube robots have potential for use in a wide variety of surgical procedures due to their small size, dexterity, and ability to move in highly curved paths. Unlike most existing clinical robots, the design of these robots can be developed and manufactured on a patient- and procedure-specific basis. The design of concentric tube robots typically requires significant computation and optimization, and it remains unclear how the surgeon should be involved. We propose to use a virtual reality-based design environment for surgeons to easily and intuitively visualize and design a set of concentric tube robots for a specific patient and procedure. In this paper, we describe a novel patient-specific design process in the context of the virtual reality interface. We also show a resulting concentric tube robot design, created by a pediatric urologist to access a kidney stone in a pediatric patient.

  18. Safety of Nuclear Power Plants: Design. Specific Safety Requirements

    International Nuclear Information System (INIS)

    2012-01-01

    On the basis of the principles included in the Fundamental Safety Principles, IAEA Safety Standards Series No. SF-1, this Safety Requirements publication establishes requirements applicable to the design of nuclear power plants. It covers the design phase and provides input for the safe operation of the power plant. It elaborates on the safety objective, safety principles and concepts that provide the basis for deriving the safety requirements that must be met for the design of a nuclear power plant. Contents: 1. Introduction; 2. Applying the safety principles and concepts; 3. Management of safety in design; 4. Principal technical requirements; 5. General plant design; 6. Design of specific plant systems.

  19. From Paper to PDA: Design and Evaluation of a Clinical Ward Instruction on a Mobile Device

    Science.gov (United States)

    Kanstrup, Anne Marie; Stage, Jan

    Mobile devices with small screens and minimal facilities for interaction are increasingly being used in complex human activities for accessing and processing information, while the user is moving. This paper presents a case study of the design and evaluation of a mobile system, which involved transformation of complex text and tables to digital format on a PDA. The application domain was an emergency medical ward, and the user group was junior registrars. We designed a PDA-based system for accessing information, focusing on the ward instruction, implemented a prototype and evaluated it for usability and utility. The evaluation results indicate significant problems in the interaction with the system as well as the extent to which the system is useful for junior registrars in their daily work.

  20. Instructional Design as Resource for the Strengthening of the Regional Identity

    Directory of Open Access Journals (Sweden)

    Carol del Carmen Terán González

    2017-05-01

    Full Text Available The present investigation takes as a fundamental goal, the elaboration of an instructional digital design that contributes to the strengthening of the regional identity of the students. The study is based on the theoretical postulates of: UNESCO (2004, CBN (1997, Ausubel (1983, Vygotsky, Rodríguez (2001, Careaga (2001, Galvis (1992, Pastorini, (2000, Salazar (2008, Rosario (2005, Bernice McCarthy (1987, among others. The same one, adopted the type of descriptive investigation, with a field design placed in the modality of viable project. The population is constituted by 12 teachers, and 40 students of the sixth degree. For the diagnostic phase a questionnaire will be applied with 14 items for teachers and students, the validation will be of content across the experts' judgment. In conclusion, there exists weakness for the constitutive elements of the historical memory as part of the regional identity.

  1. 13th Forum for Specification and Design Languages (FDL) conference

    CERN Document Server

    Morawiec, Adam; System Specification and Design Languages : Selected Contributions from FDL 2010

    2012-01-01

    This book brings together a selection of the best papers from the thirteenth edition of the Forum on specification and Design Languages Conference (FDL), which was held in Southampton, UK in September 2010.  FDL is a well established international forum devoted to dissemination of research results, practical experiences and new ideas in the application of specification, design and verification languages to the design, modelling and verification of integrated circuits, complex hardware/software embedded systems, and mixed-technology systems. Covers design verification, automatic synthesis and mechanized debug aids; Includes language-based modeling and design techniques for embedded systems; Covers design, modeling and verification of mixed physical domain and mixed signal systems that include significant analog parts in electrical and non-electrical domains; Includes formal and semi-formal system level design methods for complex embedded systems based on the Unified Modelling Language (UML) and Model Driven E...

  2. Computerized Writing and Reading Instruction for Students in Grades 4 to 9 With Specific Learning Disabilities Affecting Written Language

    Science.gov (United States)

    Tanimoto, Steven; Thompson, Rob; Berninger, Virginia W.; Nagy, William; Abbott, Robert D.

    2015-01-01

    Computer scientists and educational researchers evaluated effectiveness of computerized instruction tailored to evidence-based impairments in specific learning disabilities (SLDs) in students in grades 4 to 9 with persisting SLDs despite prior extra help. Following comprehensive, evidence-based differential diagnosis for dysgraphia (impaired handwriting), dyslexia (impaired word reading and spelling), and oral and written language learning disability (OWL LD), students completed 18 sessions of computerized instruction over about 3 months. The 11 students taught letter formation with sequential, numbered, colored arrow cues with full contours who wrote letters on lines added to iPAD screen showed more and stronger treatment effects than the 21 students taught using only visual motion cues for letter formation who wrote on an unlined computer monitor. Teaching to all levels of language in multiple functional language systems (by ear, eye, mouth, and hand) close in time resulted in significant gains in reading and writing skills for the group and in diagnosed SLD hallmark impairments for individuals; also, performance on computerized learning activities correlated with treatment gains. Results are discussed in reference to need for both accommodations and explicit instruction for persisting SLDs and the potential for computers to teach handwriting, morphophonemic orthographies, comprehension, and composition. PMID:26858470

  3. Applying Instructional Design Strategies and Behavior Theory to Household Disaster Preparedness Training.

    Science.gov (United States)

    Thomas, Tracy N; Sobelson, Robyn K; Wigington, Corinne J; Davis, Alyson L; Harp, Victoria H; Leander-Griffith, Michelle; Cioffi, Joan P

    Interventions and media campaigns promoting household disaster preparedness have produced mixed results in affecting behaviors. In large part, this is due to the limited application of instructional design strategies and behavior theory, such as the Transtheoretical Model (TTM). This study describes the development and evaluation of Ready CDC, an intervention designed to increase household disaster preparedness among the Centers for Disease Control and Prevention (CDC) workforce. (1) Describe the instructional design strategies employed in the development of Ready CDC and (2) evaluate the intervention's impact on behavior change and factors influencing stage progression for household disaster preparedness behavior. Ready CDC was adapted from the Federal Emergency Management Agency's (FEMA's) Ready campaign. Offered to CDC staff September 2013-November 2015, it consisted of a preassessment of preparedness attitudes and behaviors, an in-person training, behavioral reinforcement communications, and a 3-month follow-up postassessment. Ready CDC employed well-accepted design strategies, including presenting stimulus material and enhancing transfer of desired behavior. Excluding those in the TTM "maintenance" stage at baseline, this study determined 44% of 208 participants progressed at least 1 stage for developing a written disaster plan. Moreover, assessment of progression by stage found among participants in the "precontemplation" (n = 16), "contemplation" (n = 15), and "preparation" (n = 125) stages at baseline for assembling an emergency kit, 25%, 27%, and 43% moved beyond the "preparation" stage, respectively. Factors influencing stage movement included knowledge, attitudes, and community resiliency but varied depending on baseline stage of change. Employing instructional strategies and behavioral theories in preparedness interventions optimizes the potential for individuals to adopt preparedness behaviors. Study findings suggest that stage movement toward

  4. Asthma in the community: Designing instruction to help students explore scientific dilemmas that impact their lives

    Science.gov (United States)

    Tate, Erika Dawn

    School science instruction that connects to students' diverse home, cultural, or linguistic experiences can encourage lifelong participation in the scientific dilemmas that impact students' lives. This dissertation seeks effective ways to support high school students as they learn complex science topics and use their knowledge to transform their personal and community environments. Applying the knowledge integration perspective, I collaborated with education, science, and community partners to design a technology enhanced science module, Improving Your Community's Asthma Problem. This exemplar community science curriculum afforded students the opportunity to (a) investigate a local community health issue, (b) interact with relevant evidence related to physiology, clinical management, and environmental risks, and (c) construct an integrated understanding of the asthma problem in their community. To identify effective instructional scaffolds that engage students in the knowledge integration process and prepare them to participate in community science, I conducted 2 years of research that included 5 schools, 10 teachers, and over 500 students. This dissertation reports on four studies that analyzed student responses on pre-, post-, and embedded assessments. Researching across four design stages, the iterative design study investigated how to best embed the visualizations of the physiological processes breathing, asthma attack, and the allergic immune response in an inquiry activity and informed evidence-based revisions to the module. The evaluation study investigated the impact of this revised Asthma module across multiple classrooms and differences in students' prior knowledge. Combining evidence of student learning from the iterative and evaluation studies with classroom observations and teacher interviews, the longitudinal study explored the impact of teacher practices on student learning in years 1 and 2. In the final chapter, I studied how the Asthma module and

  5. Instruction in Divergent Thinking for Conceptual Design: A Case Study Based on a Corkscrew

    OpenAIRE

    Ying-Chieh Liu; Chin-Yu Kao; Amaresh Chakrabarti

    2015-01-01

    Abstraction is a powerful tool for designers in the conceptual design stage. Such abstractions take various forms, and little is known as to how a particular method of abstraction would support designers in specific design cases. A method is proposed which includes a deliberate step for divergent thinking. The method presents learners with an abstract representation of an existing artifact, and encourages them to explore potential concepts that are different in style but are based on the same...

  6. Aligning the Quantum Perspective of Learning to Instructional Design: Exploring the Seven Definitive Questions

    Directory of Open Access Journals (Sweden)

    Katherine J. Janzen

    2011-11-01

    Full Text Available This paper builds upon a foundational paper (under review which explores the rudiments of the quantum perspective of learning. The quantum perspective of learning uses the principles of exchange theory or borrowed theory from the field of quantum holism pioneered by quantum physicist David Bohm (1971, 1973 to understand learning in a new way. Bohm proposes that everything exists as wholes, rather than as parts, and that everything is connected. Similarly, the quantum perspective of learning proposes that individuals learn in holistic ways as they interact with temporal and in infinitely extending virtual worlds. Further, according to the quantum perspective of learning, learners have infinite potential. In this paper, the quantum perspective of learning is examined utilizing a combination of Schunk’s (1991 and Ertmer and Newby’s (1993 definitive questions for aligning learning theory with instructional design. These seven definitive questions focus on how learning happens, influential factors in learning, the role of memory, transfer of knowledge, modalities of learning that can best explain the quantum perspective of learning, applicable assumptions, and a discussion of how instruction can be organized to optimize learning. Examples of strategies that facilitate the quantum perspective of learning are provided.

  7. Designing flexible instructional space for teaching introductory physics with emphasis on inquiry and collaborative active learning

    Science.gov (United States)

    Bykov, Tikhon

    2010-03-01

    In recent years McMurry University's introductory physics curriculum has gone through a series of significant changes to achieve better integration of traditional course components (lecture/lab/discussion) by means of instructional design and technology. A system of flexible curriculum modules with emphasis on inquiry-based teaching and collaborative active learning has been introduced. To unify module elements, a technology suite has been used that consists of Tablet PC's and software applications including Physlets, tablet-adapted personal response system, PASCO data acquisition systems, and MS One-note collaborative writing software. Adoption of the new teaching model resulted in reevaluation of existing instructional spaces. The new teaching space will be created during the renovation of the McMurry Science Building. This space will allow for easy transitions between lecture and laboratory modes. Movable partitions will be used to accommodate student groups of different sizes. The space will be supportive of small peer-group activities with easy-to-reconfigure furniture, multiple white and black board surfaces and multiple projection screens. The new space will be highly flexible to account for different teaching functions, different teaching modes and learning styles.

  8. Mathematical design of a novel input/instruction device using a moving acoustic emitter

    Science.gov (United States)

    Wang, Xianchao; Guo, Yukun; Li, Jingzhi; Liu, Hongyu

    2017-10-01

    This paper is concerned with the mathematical design of a novel input/instruction device using a moving emitter. The emitter acts as a point source and can be installed on a digital pen or worn on the finger of the human being who desires to interact/communicate with the computer. The input/instruction can be recognized by identifying the moving trajectory of the emitter performed by the human being from the collected wave field data. The identification process is modelled as an inverse source problem where one intends to identify the trajectory of a moving point source. There are several salient features of our study which distinguish our result from the existing ones in the literature. First, the point source is moving in an inhomogeneous background medium, which models the human body. Second, the dynamical wave field data are collected in a limited aperture. Third, the reconstruction method is independent of the background medium, and it is totally direct without any matrix inversion. Hence, it is efficient and robust with respect to the measurement noise. Both theoretical justifications and computational experiments are presented to verify our novel findings.

  9. Specification styles in distributed systems design and verification

    NARCIS (Netherlands)

    Vissers, C.A.; Scollo, Giuseppe; van Sinderen, Marten J.; Brinksma, Hendrik

    1991-01-01

    Substantial experience with the use of formal specification languages in the design of distributed systems has shown that finding appropriate structures for formal specifications presents a serious, and often underestimated problem. Its solutions are of great importance for ensuring the quality of

  10. Automated Design of Application-Specific Smart Camera Architectures

    NARCIS (Netherlands)

    Caarls, W.

    2008-01-01

    Parallel heterogeneous multiprocessor systems are often shunned in embedded system design, not only because of their design complexity but because of the programming burden. Programs for such systems are architecture-dependent: the application developer needs architecture-specific knowledge to

  11. Site-specific design optimization of wind turbines

    DEFF Research Database (Denmark)

    Fuglsang, P.; Bak, C.; Schepers, J.G.

    2002-01-01

    This article reports results from a European project, where site characteristics were incorporated into the design process of wind turbines, to enable site-specific design. Two wind turbines of different concept were investigated at six different sites comprising normal flat terrain, offshore...... and complex terrain wind farms. Design tools based on numerical optimization and aeroelastic calculations were combined with a cost model to allow optimization for minimum cost of energy. Different scenarios were optimized ranging from modifications of selected individual components to the complete design...... of a new wind turbine. Both annual energy yield and design-determining loads depended on site characteristics, and this represented a potential for site-specific design. The maximum variation in annual energy yield was 37% and the maximum variation in blade root fatigue loads was 62%. Optimized site...

  12. Slowing Entropy: Instructional Policy Design in New York City, 2011-12. Policy Brief #14-3

    Science.gov (United States)

    Supovitz, Jonathan

    2014-01-01

    How do policymakers craft policies, particularly centered on the Common Core State Standards, to be more resilient and less likely to disintegrate during enactment? Researcher Jonathan Supovitz in "Slowing Entropy: Instructional Policy Design in New York City, 2011-12" examines the design of a New York City Department of Education policy…

  13. Effectiveness of Facebook Based Learning to Enhance Creativity among Islamic Studies Students by Employing Isman Instructional Design Model

    Science.gov (United States)

    Alias, Norlidah; Siraj, Saedah; Daud, Mohd Khairul Azman Md; Hussin, Zaharah

    2013-01-01

    The study examines the effectiveness of Facebook based learning to enhance creativity among Islamic Studies students in the secondary educational setting in Malaysia. It describes the design process by employing the Isman Instructional Design Model. A quantitative study was carried out using experimental method and background survey. The…

  14. Rethinking Instructional Technology to Improve Pedagogy for Digital Literacy: A Design Case in a Graduate Early Childhood Education Course

    Science.gov (United States)

    Langub, Lee Woodham; Lokey-Vega, Anissa

    2017-01-01

    Digital literacy is an important aspect to consider within teacher education as a way to address twenty-first century learner needs, particularly in early childhood contexts where developmental concerns should be paramount in making instructional design decisions. This article is a design case of a graduate level early childhood education…

  15. A Model of Research Paper Writing Instructional Materials for Academic Writing Course: "Needs & Documents Analysis and Model Design"

    Science.gov (United States)

    Ghufron, M. Ali; Saleh, Mursid; Warsono; Sofwan, Ahmad

    2016-01-01

    This study aimed at designing a model of instructional materials for Academic Writing Course focusing on research paper writing. The model was designed based on the Curriculum at the English Education Study Program, Faculty of Language and Art Education of IKIP PGRI Bojonegoro, East Java, Indonesia. This model was developed in order to improve…

  16. Video Games: A Human Factors Guide to Visual Display Design and Instructional System Design

    Science.gov (United States)

    1984-04-01

    Abstract K Electronic video games have many of the same technological and psychological characteristics that are found in military computer-based...employed as learning vehicles, the especially compelling characteristics of electronic video games have not been fully explored for possible exploitation...new electronic video games . !? Accordingly, the following experiment was designed to determine those m dimensions along which electronic

  17. Application software, domain-specific languages, and language design assistants

    OpenAIRE

    Heering, Jan

    2000-01-01

    textabstractWhile application software does the real work, domain-specific languages (DSLs) are tools to help produce it efficiently, and language design assistants in turn are meta-tools to help produce DSLs quickly. DSLs are already in wide use (HTML for web pages, Excel macros for spreadsheet applications, VHDL for hardware design, ...), but many more will be needed for both new as well as existing application domains. Language design assistants to help develop them currently exist only in...

  18. Developing the conceptual instructional design with inquiry-based instruction model of secondary students at the 10th grade level on digestion system and cellular degradation issue

    Science.gov (United States)

    Rotjanakunnatam, Boonthida; Chayaburakul, Kanokporn

    2018-01-01

    The aims of this research study was to develop the conceptual instructional design with the Inquiry-Based Instruction Model (IBIM) of secondary students at the 10th grade level on Digestion System and Cellular Degradation issue using both oxygen and oxygen-degrading cellular nutrients were designed instructional model with a sample size of 45 secondary students at the 10th Grade level. Data were collected by asking students to do a questionnaire pre and post learning processes. The questionnaire consists of two main parts that composed of students' perception questionnaire and the questionnaire that asked the question answer concept for the selected questionnaire. The 10-item Conceptual Thinking Test (CTT) was assessed students' conceptual thinking evaluation that it was covered in two main concepts, namely; Oxygen degradation nutrients and degradation nutrients without oxygen. The data by classifying students' answers into 5 groups and measuring them in frequency and a percentage of students' performances of their learning pre and post activities with the Inquiry-Based Instruction Model were analyzed as a tutorial. The results of this research found that: After the learning activities with the IBIM, most students developed concepts of both oxygen and oxygen-degrading cellular nutrients in the correct, complete and correct concept, and there are a number of students who have conceptual ideas in the wrong concept, and no concept was clearly reduced. However, the results are still found that; some students have some misconceptions, such as; the concept of direction of electron motion and formation of the ATP of bioactivities of life. This cause may come from the nature of the content, the complexity, the continuity, the movement, and the time constraints only in the classroom. Based on this research, it is suggested that some students may take some time, and the limited time in the classroom to their learning activity with content creation content binding and

  19. The importance of the instructional guide in the design of virtual learning environments

    Directory of Open Access Journals (Sweden)

    Aida Mercedes Gomez-Suarez

    2017-07-01

    Full Text Available The appropriation of information and communication technologies (ICTs in the processes of teaching and learning is one of the main challenges of educational institutions and teachers in the current society of knowledge, as responsible for a use Rational and meaningful use of its digital educational resources (RED. This involves developing competencies in the implementation of ICT in the classroom to enrich the learning environments. This article presents a reflection on the instructional guide as a didactic tool in the elaboration of RED that facilitates the design of these resources to support the activities of the classroom in these processes. This reflection is the result of a research on the subject carried out in a context of university teaching

  20. The Effects of a Computer-Assisted Teaching Material, Designed According to the ASSURE Instructional Design and the ARCS Model of Motivation, on Students' Achievement Levels in a Mathematics Lesson and Their Resulting Attitudes

    Science.gov (United States)

    Karakis, Hilal; Karamete, Aysen; Okçu, Aydin

    2016-01-01

    This study examined the effects that computer-assisted instruction had on students' attitudes toward a mathematics lesson and toward learning mathematics with computer-assisted instruction. The computer software we used was based on the ASSURE Instructional Systems Design and the ARCS Model of Motivation, and the software was designed to teach…

  1. Backward Instructional design for an educational open resource in Spanish Vocational Training: The case of the Web Apps Project

    Directory of Open Access Journals (Sweden)

    Cristian Jorge GARCÍA MARCOS

    2017-07-01

    Full Text Available The article is concerned with the instructional design process used to elaborate an educational media developing the Web Applications module curriculum of Microcomputer Systems and Networks Intermediate Level Training Cycle, which belongs to the professional family of Computing and Communications within the studies of Vocational Education and Training. A backward model is followed as instructional design to create the educational media, starting with the learning outcomes and ending with the contents, in a reverse way to the procedure used in other instructional designs. The educational media has been designed based on constructivism as pedagogical principle and it has been used to create projects for the student to be actively involved in the development of their knowledge. The result is an open educational resource composed of six didactic sequences, where the student is expected to achieve higher order thinking skills. In addition to openness in access, use, adaptation and redistribution of material, the article provides a detailed view of the process that has been followed in each phase of instructional design. In this way, the educational resource evolves from being not only open in its content, but also in its design, so that the latter becomes accessible, reusable, adapted and redistributed by others. The full open educational resource can be found at the following link: http://www.cristiangarcia.org/WebAppsProject/index.html

  2. The Effects of a Computer-Assisted Teaching Material, Designed According to the ASSURE Instructional Design and the ARCS Model of Motivation, on Students’ Achievement Levels in a Mathematics Lesson and Their Resulting Attitudes

    OpenAIRE

    Hilal Karakış; Ayşen Karamete; Aydın Okçu

    2016-01-01

    This study examined the effects that computer-assisted instruction had on students’ attitudes toward a mathematics lesson and toward learning mathematics with computer-assisted instruction. The computer software we used was based on the ASSURE Instructional Systems Design and the ARCS Model of Motivation, and the software was designed to teach fractions to fourth-grade students. The skill levels of these students were gauged before and after receiving the computer-assisted instruction. We str...

  3. Design specifications for manufacturability of MCM-C multichip modules

    Energy Technology Data Exchange (ETDEWEB)

    Allen, C.; Blazek, R.; Desch, J.; Elarton, J.; Kautz, D.; Markley, D.; Morgenstern, H.; Stewart, R.; Warner, L.

    1995-06-01

    The scope of this document is to establish design guidelines for electronic circuitry packaged as multichip modules of the ceramic substrate variety, although many of these guidelines are applicable to other types of multichip modules. The guidelines begin with prerequisite information which must be developed between customer and designer of the multichip module. The core of the guidelines focuses on the many considerations that must be addressed during the multichip module design. The guidelines conclude with the resulting deliverables from the design which satisfy customer requirements and/or support the multichip module fabrication and testing processes. Considerable supporting information, checklists, and design constraints are captured in specific appendices and used as reference information in the main body text. Finally some real examples of multichip module design are presented.

  4. Patient-specific hip prostheses designed by surgeons

    Directory of Open Access Journals (Sweden)

    Coigny Florian

    2016-09-01

    Full Text Available Patient-specific bone and joint replacement implants lead to better functional and aesthetic results than conventional methods [1], [2], [3]. But extracting 3D shape information from CT Data and designing individual implants is demanding and requires multiple surgeon-to-engineer interactions. For manufacturing purposes, Additive Manufacturing offers various advantages, especially for low volume manufacturing parts, such as patient specific implants. To ease these new approaches and to avoid surgeon-to-engineer interactions a new design software approach is needed which offers highly automated and user friendly planning steps.

  5. Design of multi-specificity in protein interfaces.

    Directory of Open Access Journals (Sweden)

    Elisabeth L Humphris

    2007-08-01

    Full Text Available Interactions in protein networks may place constraints on protein interface sequences to maintain correct and avoid unwanted interactions. Here we describe a "multi-constraint" protein design protocol to predict sequences optimized for multiple criteria, such as maintaining sets of interactions, and apply it to characterize the mechanism and extent to which 20 multi-specific proteins are constrained by binding to multiple partners. We find that multi-specific binding is accommodated by at least two distinct patterns. In the simplest case, all partners share key interactions, and sequences optimized for binding to either single or multiple partners recover only a subset of native amino acid residues as optimal. More interestingly, for signaling interfaces functioning as network "hubs," we identify a different, "multi-faceted" mode, where each binding partner prefers its own subset of wild-type residues within the promiscuous binding site. Here, integration of preferences across all partners results in sequences much more "native-like" than seen in optimization for any single binding partner alone, suggesting these interfaces are substantially optimized for multi-specificity. The two strategies make distinct predictions for interface evolution and design. Shared interfaces may be better small molecule targets, whereas multi-faceted interactions may be more "designable" for altered specificity patterns. The computational methodology presented here is generalizable for examining how naturally occurring protein sequences have been selected to satisfy a variety of positive and negative constraints, as well as for rationally designing proteins to have desired patterns of altered specificity.

  6. Maximizing the Production of Biogas in an Instructional Manipulative Designed to Teach Energy Concepts to High School Students

    Science.gov (United States)

    McCall, Shakira Renee

    In an effort to stress the benefits of the application of renewable energy to the next generation of science, technology, engineering, arts, and mathematics (STEAM) professionals, instructional modules on energy and biogas were integrated into a summer camp curriculum that challenged students to apply STEAM concepts in the design and development of chain reaction machines. Each module comprised an interactive presentations and a hands-on component where students operated a manipulative relevant to the content. During summer 2013, this camp was implemented at two high schools in Arizona and one in Trinidad and Tobago. Assessments showed that the overall modules were effective in helping students learn and retain the information presented on energy and biogas production. To improve future implementations of these modules, specifically the module on biogas production, the anaerobic digester was redesigned. In addition, a designed experiment was conducted to determine how to optimize the influent and operational environment that is available in an average high school classroom to generate maximum biogas yield. Eight plug-flow anaerobic digesters made of PVC piping and fixtures were used in a 2x3 factorial design assessing: co-digestion (20mL or 50mL) used cooking oil, temperature (25°C or 40°C), and addition of inoculum (0mL or 200mL). Biogas production was captured at two intervals over a 30-day period, and the experiments were replicated three times. Results showed that temperature at 40°C significantly increased biogas production and should be used over 25°C when using anaerobic digesters. Other factors that may potentially increase biogas production are combination of temperature at 40°C and 50mL of used cooking oil. In the future, the improvements made in the design of the anaerobic digester, and the applications of the finding from the experimental design, are expected to lead to an improved manipulative for teaching students about biogas production.

  7. An Arts-Based Instructional Model for Student Creativity in Engineering Design

    Directory of Open Access Journals (Sweden)

    Brian Laduca

    2017-02-01

    Full Text Available Over the past twenty years, nearly all job growth in the United States has emerged from new companies and organizations with assumedly innovative products, services, and practices. Yet, the nurturing of student creative thinking and problem solving is infrequent in engineering education. Inherent to developing these creativity skills and attributes is the need to be exposed to difference — in people and environment. Engineering education rarely offers such opportunities. Additionally, engineering students are rarely presented opportunities to develop designs responding to real human problems. This paper puts forth a new instructional model to address these needs by utilizing arts processes and practices as catalysts for both creativity development in students and transdisciplinary collaboration on problems addressing deep human needs. This model is premised on the substantiated role of the arts in developing creativity and growing understanding of the human condition. This art-based instructional model was piloted as exploratory pedagogical research during the summers of 2015 and 2016 as a partnership between the Arts Nexus (IAN and the School of Engineering at the University of Dayton. In each year, this program supported twelve student interns from engineering, business, science, the arts, and the humanities to develop innovative technologies and services meeting client needs. Student growth in creative problem-solving and transdisciplinary collaboration, as well as the success of the completed innovation technology prototype were assessed by the project mentors and participating students via survey evaluations and narrative responses. The assessment results revealed substantial student growth in student creativity and transdisciplinary collaboration and a remarkably strong evaluation of the success of the students’ innovations. Also realized for all students was a transformation in their perception of their place in the world as

  8. Extracellular sugar modifications provide instructive and cell-specific information for axon-guidance choices.

    NARCIS (Netherlands)

    Bulow, H.E.; Tjoe, N.; Townley, R.A.; Didiano, D.; Kuppevelt, A.H.M.S.M. van; Hobert, O.

    2008-01-01

    Heparan sulfates (HSs) are extraordinarily complex extracellular sugar molecules that are critical components of multiple signaling systems controlling neuronal development. The molecular complexity of HSs arises through a series of specific modifications, including sulfations of sugar residues and

  9. Specification, Design, and Analysis of Advanced HUMS Architectures

    Science.gov (United States)

    Mukkamala, Ravi

    2004-01-01

    During the two-year project period, we have worked on several aspects of domain-specific architectures for HUMS. In particular, we looked at using scenario-based approach for the design and designed a language for describing such architectures. The language is now being used in all aspects of our HUMS design. In particular, we have made contributions in the following areas. 1) We have employed scenarios in the development of HUMS in three main areas. They are: (a) To improve reusability by using scenarios as a library indexing tool and as a domain analysis tool; (b) To improve maintainability by recording design rationales from two perspectives - problem domain and solution domain; (c) To evaluate the software architecture. 2) We have defined a new architectural language called HADL or HUMS Architectural Definition Language. It is a customized version of xArch/xADL. It is based on XML and, hence, is easily portable from domain to domain, application to application, and machine to machine. Specifications written in HADL can be easily read and parsed using the currently available XML parsers. Thus, there is no need to develop a plethora of software to support HADL. 3) We have developed an automated design process that involves two main techniques: (a) Selection of solutions from a large space of designs; (b) Synthesis of designs. However, the automation process is not an absolute Artificial Intelligence (AI) approach though it uses a knowledge-based system that epitomizes a specific HUMS domain. The process uses a database of solutions as an aid to solve the problems rather than creating a new design in the literal sense. Since searching is adopted as the main technique, the challenges involved are: (a) To minimize the effort in searching the database where a very large number of possibilities exist; (b) To develop representations that could conveniently allow us to depict design knowledge evolved over many years; (c) To capture the required information that aid the

  10. Artefact specification, design, and production as a process of communication

    DEFF Research Database (Denmark)

    Galle, Per

    1999-01-01

    about communication as literal ‘transmission’ or ‘sharing’ of ideas. It is then explained how the initial artefact specification, the design representation, and ultimately the artefact itself can all be seen as symbolic expressions of ideas that are communicated, and it is shown how the conditions...... for the success of communication carry over to the artefact production process. The purpose of the analysis is to provide a conceptual background for the study of various aspects of artefact production, such as design, or the development of computer-based tools for collaborative design, product modelling...

  11. Classroom observation data and instruction in primary mathematics education: improving design and rigour

    Science.gov (United States)

    Thompson, Carla J.; Davis, Sandra B.

    2014-06-01

    The use of formal observation in primary mathematics classrooms is supported in the literature as a viable method of determining effective teaching strategies and appropriate tasks for inclusion in the early years of mathematics learning. The twofold aim of this study was to (a) investigate predictive relationships between primary mathematics classroom observational data and student achievement data, and (b) to examine the impact of providing periodic classroom observational data feedback to teachers using a Relational-Feedback-Intervention (RFI) Database Model. This observational research effort focused on an empirical examination of student engagement levels in time spent on specific learning activities observed in primary mathematics classrooms as predictors of student competency outcomes in mathematics. Data were collected from more than 2,000 primary classroom observations in 17 primary schools during 2009-2011 and from standardised end-of-year tests for mathematics achievement. Results revealed predictive relationships among several types of teaching and learning tasks with student achievement. Specifically, the use of mathematics concepts, technology and hands-on materials in primary mathematics classrooms was found to produce substantive predictors of increased student mathematics achievement. Additional findings supported the use of periodic classroom observation data reporting as a positive influence on teachers' decisions in determining instructional tasks for inclusion in primary mathematics classrooms. Study results indicate classroom observational research involving a RFI Database Model is a productive tool for improving teaching and learning in primary mathematics classrooms.

  12. Baseline design of an OTEC pilot plantship. Volume C. Specifications

    Energy Technology Data Exchange (ETDEWEB)

    Glosten, L. R.; Bringloe, Thomas; Soracco, Dave; Fenstermacher, Earl; Magura, Donald; Sander, Olof; Richards, Dennis; Seward, Jerry

    1979-05-01

    Volume C is part of a three-volume report that presents a baseline engineering design of an Ocean Thermal Energy Conversion (OTEC) plantship. This volume provides the specifications for the hull, cold-water pipe, ship outfitting and machinery, OTEC power system, electrical system, and folded-tube heat exchangers.

  13. Application software, domain-specific languages, and language design assistants

    NARCIS (Netherlands)

    J. Heering (Jan)

    2000-01-01

    textabstractWhile application software does the real work, domain-specific languages (DSLs) are tools to help produce it efficiently, and language design assistants in turn are meta-tools to help produce DSLs quickly. DSLs are already in wide use (HTML for web pages, Excel macros for spreadsheet

  14. An Instructional Design Model for Developing a Computer Curriculum To Increase Employee Productivity in a Pharmaceutical Company.

    Science.gov (United States)

    Stumpf, Mark R.

    This report presents an instructional design model that was developed for use by the End-Users Computing department of a large pharmaceutical company in developing effective--but not lengthy--microcomputer training seminars to train office workers and executives in the proper use of computers and thus increase their productivity. The 14 steps of…

  15. Investigating Peer Review as an Intentional Learning Strategy to Foster Collaborative Knowledge-Building in Students of Instructional Design

    Science.gov (United States)

    Brill, Jennifer M.; Hodges, Charles B.

    2011-01-01

    Peer review has been advocated for as an intentional strategy to support the knowledge and skill attainment of adult learners preparing for professional practice, including those students preparing for instructional design and technology practice. The purposes of this article are to discuss the practical application of peer review as an…

  16. Using Web-Based Instruction to Teach Music Theory in the Piano Studio: Defining, Designing, and Implementing an Integrative Approach

    Science.gov (United States)

    Carney, Robert D.

    2010-01-01

    This dissertation rationalizes the best use of Web-based instruction (WBI) for teaching music theory to private piano students in the later primary grades. It uses an integrative research methodology for defining, designing, and implementing a curriculum that includes WBI. Research from the fields of music education, educational technology,…

  17. Elementary Science Teachers' Integration of Engineering Design into Science Instruction: Results from a Randomised Controlled Trial

    Science.gov (United States)

    Maeng, Jennifer L.; Whitworth, Brooke A.; Gonczi, Amanda L.; Navy, Shannon L.; Wheeler, Lindsay B.

    2017-01-01

    This randomised controlled trial used a mixed-methods approach to investigate the frequency and how elementary teachers integrated engineering design (ED) principles into their science instruction following professional development (PD). The ED components of the PD were aligned with Cunningham and Carlsen's [(2014). "Teaching engineering…

  18. Tech Select Decision Aide: A Mobile Application to Facilitate Just-in-Time Decision Support for Instructional Designers

    Science.gov (United States)

    Dabbagh, Nada; Fake, Helen

    2017-01-01

    With the ubiquitous use of mobile technologies and the increasing demand for just-in-time training, there is a need to prepare and support instructional designers and educators to meet the pedagogical and technological development requirements of their target audience in the most effective and efficient way. This paper reviews the iterative…

  19. Project-Based Learning with an Online Peer Assessment System in a Photonics Instruction for Enhancing LED Design Skills

    Science.gov (United States)

    Chang, Shu-Hsuan; Wu, Tsung-Chih; Kuo, Yen-Kuang; You, Li-Chih

    2012-01-01

    This study proposed a novel instructional approach, a two-stage LED simulation of Project-based learning (PBL) course with online peer assessment (OPA), and explored how to apply OPA to the different structured problems in a PBL course to enhance students' professional skills in LED design as well as meta-cognitive thinking. The participants of…

  20. Comparative effectiveness of instructional design features in simulation-based education: systematic review and meta-analysis.

    Science.gov (United States)

    Cook, David A; Hamstra, Stanley J; Brydges, Ryan; Zendejas, Benjamin; Szostek, Jason H; Wang, Amy T; Erwin, Patricia J; Hatala, Rose

    2013-01-01

    Although technology-enhanced simulation is increasingly used in health professions education, features of effective simulation-based instructional design remain uncertain. Evaluate the effectiveness of instructional design features through a systematic review of studies comparing different simulation-based interventions. We systematically searched MEDLINE, EMBASE, CINAHL, ERIC, PsycINFO, Scopus, key journals, and previous review bibliographies through May 2011. We included original research studies that compared one simulation intervention with another and involved health professions learners. Working in duplicate, we evaluated study quality and abstracted information on learners, outcomes, and instructional design features. We pooled results using random effects meta-analysis. From a pool of 10,903 articles we identified 289 eligible studies enrolling 18,971 trainees, including 208 randomized trials. Inconsistency was usually large (I2 > 50%). For skills outcomes, pooled effect sizes (positive numbers favoring the instructional design feature) were 0.68 for range of difficulty (20 studies; p simulation-based education.

  1. Molecular design of sequence specific DNA alkylating agents.

    Science.gov (United States)

    Minoshima, Masafumi; Bando, Toshikazu; Shinohara, Ken-ichi; Sugiyama, Hiroshi

    2009-01-01

    Sequence-specific DNA alkylating agents have great interest for novel approach to cancer chemotherapy. We designed the conjugates between pyrrole (Py)-imidazole (Im) polyamides and DNA alkylating chlorambucil moiety possessing at different positions. The sequence-specific DNA alkylation by conjugates was investigated by using high-resolution denaturing polyacrylamide gel electrophoresis (PAGE). The results showed that polyamide chlorambucil conjugates alkylate DNA at flanking adenines in recognition sequences of Py-Im polyamides, however, the reactivities and alkylation sites were influenced by the positions of conjugation. In addition, we synthesized conjugate between Py-Im polyamide and another alkylating agent, 1-(chloromethyl)-5-hydroxy-1,2-dihydro-3H-benz[e]indole (seco-CBI). DNA alkylation reactivies by both alkylating polyamides were almost comparable. In contrast, cytotoxicities against cell lines differed greatly. These comparative studies would promote development of appropriate sequence-specific DNA alkylating polyamides against specific cancer cells.

  2. There Is More Variation "within" than "across" Domains: An Interview with Paul A. Kirschner about Applying Cognitive Psychology-Based Instructional Design Principles in Mathematics Teaching and Learning

    Science.gov (United States)

    Kirschner, Paul A.; Verschaffel, Lieven; Star, Jon; Van Dooren, Wim

    2017-01-01

    In this interview we asked Paul A. Kirschner about his comments and reflections regarding the idea to apply cognitive psychology-based instructional design principles to mathematics education and some related issues. With a main focus on cognitive psychology, educational psychology, educational technology and instructional design, this…

  3. Engaging design materials, formats and Framings in specific, situated co-designing

    DEFF Research Database (Denmark)

    Agger Eriksen, Mette

    Engaging co-designers in specific situations of co- designing often also means engaging tangible working materials. However, it can be challenging, so rather than seeing it as applying design methods, the paper propose applying what I call a micro-material perspective. The practical concept captu......-design situations" clustered in three quite well- known types of co-design situations framed for; Exploring Current Use(r) Practices, Mapping Networks and Co-Designing (Possible) Futures.......Engaging co-designers in specific situations of co- designing often also means engaging tangible working materials. However, it can be challenging, so rather than seeing it as applying design methods, the paper propose applying what I call a micro-material perspective. The practical concept...... captures both paying attention to the physical design materials, the formats of their exploration and the framings of focus when understanding and planning such specific co-design situations. To exemplify applying the perspective, the paper describes and discusses six specific examples of "co...

  4. KEEFEKTIFAN PEMBELAJARAN MODEL DESIGNED STUDENT-CENTERED INSTRUCTIONAL TERHADAP KEMAMPUAN REPRESENTASI PESERTA DIDIK

    Directory of Open Access Journals (Sweden)

    Ajeng Alisa Narulita

    2013-11-01

    Full Text Available Tujuan dari penelitian ini adalah untuk mengetahui (1 apakah kemampuan representasi matematika peserta didik kelas VIII yang diberi pembelajaran dengan model Designed Student-Centered Instructional (DSCI pada mencapai ketuntasan belajar atau tidakdan (2 apakah kemampuan representasi matematika peserta didik kelas VIII yang diberi pembelajaran dengan model DSCI lebih baik dibandingkan dengan pembelajaran dengan model ekspositori. Hal tersebut yang akan menentukan apakah model DSCI efektif digunakan dalam meningkatkan kemampuan representasi matematika atau tidak.Penelitian ini merupakan penelitian eksperimen dengan populasi seluruh peserta didik kelas VIII SMP Negeri 3 Cilacap tahun ajaran 2012/2013. Sampel diambil secara acak melalui teknik area (cluster sampling sehingga diperoleh kelas VIII A sebagai kelompok eksperimen dan dan kelas VIII B sebagai kelompok kontrol. Setelah dilakukan penelitian diperoleh simpulan bahwa (1 rata-rata kemampuan representasi peserta didik kelas VIII yang diberi pembelajaran dengan model DSCI mencapai ketuntasan belajar dan (2 rata-rata kemampuan representasi peserta didik kelas VIII yang diberi pembelajaran dengan model DSCI lebih baik dibandingkan dengan pembelajaran dengan model ekspositori.

  5. Processing Instruction: A Review of Issues

    Science.gov (United States)

    Rasuki, Muhlisin

    2017-01-01

    This paper provides a critical review of Processing Instruction (PI). This type of instructional option was specifically designed to help second/foreign language (L2) learners grasp meaning manifested in the use of particular grammatical forms in a target language effectively through the provision of input. In this way, PI attempts to help…

  6. Analysis of owner design specifications for snubbers. Report 2

    Energy Technology Data Exchange (ETDEWEB)

    Butler, J.H.

    1977-08-05

    The report discusses and evaluates the adequacy of buyer specifications for snubbers. Technical specifications for snubbers (hydraulic and mechanical) were studied in detail in an effort to define the ''fundamental needs'' of the industry with respect to characteristics of snubbers during operation. In the course of this study, it was determined that there is insufficient consensus among users to make such a definition. Authorities in the fields of structural dynamics, structural systems design, and snubber design were also consulted for additional information. Information from these sources is incorporated to identify the fundamental areas of concern, areas where consensus is lacking, and problems to be resolved in order to establish meaningful standards for this equipment.

  7. Analysis of owner design specifications for snubbers. Report 2

    International Nuclear Information System (INIS)

    Butler, J.H.

    1977-01-01

    The report discusses and evaluates the adequacy of buyer specifications for snubbers. Technical specifications for snubbers (hydraulic and mechanical) were studied in detail in an effort to define the ''fundamental needs'' of the industry with respect to characteristics of snubbers during operation. In the course of this study, it was determined that there is insufficient consensus among users to make such a definition. Authorities in the fields of structural dynamics, structural systems design, and snubber design were also consulted for additional information. Information from these sources is incorporated to identify the fundamental areas of concern, areas where consensus is lacking, and problems to be resolved in order to establish meaningful standards for this equipment

  8. Designing and Developing Game-Like Learning Experience in Virtual Worlds: Challenges and Design Decisions of Novice Instructional Designers

    Science.gov (United States)

    Yilmaz, Turkan Karakus; Cagiltay, Kursat

    2016-01-01

    Many virtual worlds have been adopted for implementation within educational settings because they are potentially useful for building effective learning environments. Since the flexibility of virtual worlds challenges to obtain effective and efficient educational outcomes, the design of such platforms need more attention. In the present study, the…

  9. Learning Designs using Flipped Classroom Instruction | Conception d’apprentissage à l’aide de l’instruction en classe inversée

    Directory of Open Access Journals (Sweden)

    Amber Danielle Mazur

    2015-05-01

    Full Text Available The flipped classroom is an instructional model that leverages technology-enhanced instruction outside of class time in order to maximize student engagement and learning during class time. As part of an action research study, the authors synthesize reflections about three learning designs and how the flipped classroom model can support teaching, learning and assessment through: (1 guided collaborative discussion, (2 tabletop white boarding and (3 the development of augmented reality auras. Principles for teaching effectiveness are used as a lens to guide the reflection on the benefits and challenges with each of the learning designs. Findings suggest that flipped classroom models that emphasize collaborative learning, group work and accessibility can enable and support inquiry-based learning. Recommendations are provided for educators interested in designing learning using a flipped classroom instructional model, as well as suggestions for future action research agendas. La classe inversée est un modèle pédagogique qui met à profit l’apprentissage hors des heures en classe et qui est rehaussé par la technologie pour maximiser l’engagement et l’apprentissage des apprenants en classe. Dans le cadre de cette étude de recherche-action, les auteurs résument les réflexions sur la façon dont le modèle de la classe inversée peut appuyer l’enseignement, l’apprentissage et l’évaluation par la mise en œuvre de trois conceptions d’apprentissage par investigation : 1 discussion collaborative guidée, 2 tableau blanc de table et 3 développement d’auras en réalité augmentée. Les principes d’enseignement de l’efficacité sont utilisés comme optique guidant la réflexion sur les avantages et les défis de chacune des conceptions d’apprentissage. Les conclusions suggèrent que les modèles de classes inversées qui mettent l’accent sur l’apprentissage collaboratif, le travail en groupe et l’accessibilité peuvent

  10. Educational Modelling Language and Learning Design: new challenges for instructional re-usability and personalized learning

    NARCIS (Netherlands)

    Hummel, Hans; Manderveld, Jocelyn; Tattersall, Colin; Koper, Rob

    2003-01-01

    Published: Hummel, H. G. K., Manderveld, J. M., Tattersall, C.,& Koper, E. J. R. (2004). Educational Modelling Language: new challenges for instructional re-usability and personalized learning. International Journal of Learning Technology, 1, 1, 110-111.

  11. Human Factors Considerations in the Design of Systems of Computer Managed Instruction

    Science.gov (United States)

    Bozeman, William C.

    1978-01-01

    The findings of this study indicate that a significant portion of the wide variance in the success of the implementation of the Wisconsin System for Instructional Management is attributable to the psychological type of the user. (Author/IRT)

  12. Design and Evaluation of Health Literacy Instructional Video for Pharmacy Students

    OpenAIRE

    Catherine Santanello, PhD; Lakesha M Butler, PharmD, BCPS; Radhika Devraj, PhD

    2013-01-01

    Objectives: 1) To describe the development of a health literacy video tailored for pharmacy students. 2) To compare the use of a health literacy video as an instructional method to a previously used health literacy instructional strategy by using both and: a) assessing pharmacy students' perceptions of their ability to communicate with low health literacy patients and b) assessing pharmacy students' perceptions of their overall understanding of the role of health literacy in a pharmacy settin...

  13. LEARNING MATERIALS SELECTION FOR DIFFERENTIATED INSTRUCTION OF ENGLISH FOR SPECIFIC PURPOSES OF FUTURE PROFESSIONALS IN THE FIELD OF INFORMATION TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    Oksana Synekop

    2017-09-01

    formation of competencies in listening, speaking, reading and writing of English for Specific Purposes is determined. So, the defined learning material selection will serve as a basis for consideration of stages in the differentiated instruction of English for Specific Purposes of future professionals in the field of information technology at university level.

  14. Design patterns for instructional materials that foster proficiency at analyzing and interpreting complex geoscience data

    Science.gov (United States)

    Kastens, K. A.; Krumhansl, R.

    2016-12-01

    The Next Generation Science Standards incorporate a stronger emphasis on having students work with data than did prior standards. This emphasis is most obvious in Practice 4: Analyzing and Interpreting Data, but also permeates performance expectations built on Practice 2 when students test models, Practice 6 when students construct explanations, and Practice 7 when student test claims with evidence. To support curriculum developers who wish to guide high school students towards more sophisticated engagement with complex data, we analyzed a well-regarded body of instructional materials designed for use in introductory college courses (http://serc.carleton.edu/integrate/teaching_materials/). Our analysis sought design patterns that can be reused for a variety of topics at the high school or college level. We found five such patterns, each of which was used in at least half of the modules analyzed. We describe each pattern, provide an example, and hypothesize a theory of action that could explain how the sequence of activities leverages known perceptual, cognitive and/or social processes to foster learning from and about data. In order from most to least frequent, the observed design patterns are as follows: In Data Puzzles, students respond to guiding questions about high-value snippets of data pre-selected and sequenced by the curriculum developer to lead to an Aha! inference. In Pooling Data to See the Big Picture, small groups analyze different instances of analogous phenomenon (e.g. different hurricanes, or different divergent plate boundaries) and pool their insights to extract the commonalities that constitute the essence of that phenomenon. In Make a Decision or Recommendation, students combine geoscience data with other factors (such as economic or environmental justice concerns) to make a decision or recommendation about a human or societal action. In Predict-Observe-Explain, students make a prediction about what the Earth will look like under conditions

  15. An analysis of program planning in schools with emerging excellence in science instructional design

    Science.gov (United States)

    Carroll, Karen Marie

    Science educators agree on many of the program elements that characterize exemplary science instructional programs, but it has not been clear how the processes of planning and implementation lead to excellence in program design. This study focuses on two K--12 school clusters located in unified school districts and one K--12 school cluster spanning two non-unified districts that are in the midst of building new science programs. The clusters were selected for support by an organization of educators, scientists, and businesspersons because they were recognized as likely to produce good programs. The investigation centers on three research questions: (1) To what extent have schools engaged in science education reform achieved excellence? (2) How did schools engaged in science program improvement go about achieving their goals, and (3) What contextual factors are most closely related to the realization of quality program elements? The degree to which each program studied met indicators of quality suggested by the National Science Education Standards (NSES) are described according to an Innovation Configuration (IC) Chart. Using a Stream Diagnostic method of analysis, levels of practice were associated with contextual factors categorized as Social, Organizing, and Resource. Findings reveal the importance of a balanced and synchronized function of all components, including administrative commitment, teacher participation, and favorable logistical aspects. Individual reform projects were more likely to be successful if they included exemplary program elements and mechanisms for program managers to access district personnel and procedures needed to implement programs. A review of the cluster case histories also revealed the positive impact of cooperation between the funding organization and the project, the degree to which professional development is directly related to the new program, and the availability of resources and support for each exemplary program element.

  16. Increased Specificity of Wechsler Adult Intelligence Scale-Third Edition Matrix Reasoning Test Instructions and Time Limits

    Science.gov (United States)

    Callens, Andy M.; Atchison, Timothy B.; Engler, Rachel R.

    2009-01-01

    Instructions for the Matrix Reasoning Test (MRT) of the Wechsler Adult Intelligence Scale-Third Edition were modified by explicitly stating that the subtest was untimed or that a per-item time limit would be imposed. The MRT was administered within one of four conditions: with (a) standard administration instructions, (b) explicit instructions…

  17. Contrasting two models of academic self-efficacy--domain-specific versus cross-domain--in children receiving and not receiving special instruction in mathematics.

    Science.gov (United States)

    Jungert, Tomas; Hesser, Hugo; Träff, Ulf

    2014-10-01

    In social cognitive theory, self-efficacy is domain-specific. An alternative model, the cross-domain influence model, would predict that self-efficacy beliefs in one domain might influence performance in other domains. Research has also found that children who receive special instruction are not good at estimating their performance. The aim was to test two models of how self-efficacy beliefs influence achievement, and to contrast children receiving special instruction in mathematics with normally-achieving children. The participants were 73 fifth-grade children who receive special instruction and 70 children who do not receive any special instruction. In year four and five, the children's skills in mathematics and reading were assessed by national curriculum tests, and in their fifth year, self-efficacy in mathematics and reading were measured. Structural equation modeling showed that in domains where children do not receive special instruction in mathematics, self-efficacy is a mediating variable between earlier and later achievement in the same domain. Achievement in mathematics was not mediated by self-efficacy in mathematics for children who receive special instruction. For normal achieving children, earlier achievement in the language domain had an influence on later self-efficacy in the mathematics domain, and self-efficacy beliefs in different domains were correlated. Self-efficacy is mostly domain specific, but may play a different role in academic performance depending on whether children receive special instruction. The results of the present study provided some support of the Cross-Domain Influence Model for normal achieving children. © 2014 Scandinavian Psychological Associations and John Wiley & Sons Ltd.

  18. Oxaliplatin loaded PLAGA microspheres: design of specific release profiles.

    Science.gov (United States)

    Lagarce, F; Cruaud, O; Deuschel, C; Bayssas, M; Griffon-Etienne, G; Benoit, J

    2002-08-21

    Oxaliplatin loaded PLAGA microspheres have been prepared by solvent extraction process. Parameters affecting the release kinetics in vitro have been studied in order to design specific release profiles suitable for direct intra-tumoral injection. By varying the nature and the relative proportions of different polymers we managed to prepare microspheres with good encapsulation efficiency (75-90%) and four different release profiles: zero order kinetics (type II) and the classical sigmoïd release profile with three different sizes of plateau and burst. These results, if correlated with in vivo activity, are promising to enhance effectiveness of local tumor treatment.

  19. Integrating Cloud-Computing-Specific Model into Aircraft Design

    Science.gov (United States)

    Zhimin, Tian; Qi, Lin; Guangwen, Yang

    Cloud Computing is becoming increasingly relevant, as it will enable companies involved in spreading this technology to open the door to Web 3.0. In the paper, the new categories of services introduced will slowly replace many types of computational resources currently used. In this perspective, grid computing, the basic element for the large scale supply of cloud services, will play a fundamental role in defining how those services will be provided. The paper tries to integrate cloud computing specific model into aircraft design. This work has acquired good results in sharing licenses of large scale and expensive software, such as CFD (Computational Fluid Dynamics), UG, CATIA, and so on.

  20. The Instructional Design of Case Method Combined With Role-Playing in the Soil and Groundwater Training Courses

    Directory of Open Access Journals (Sweden)

    Mei-Yin Hwa

    2013-12-01

    Full Text Available Almost all environmental problems are caused by human. Besides being good at environmental engineering theory and technology, to enhance the ability to solve environmental problems, the environmental practitioners need a closer understanding of the stance of different stakeholders. This study is an instructional design combining both "case method" and "role-playing" into the “Soil and Groundwater Talent Training Courses” in Taipei. The curriculum is based on the hexavalent chromium pollution case in Yunlin County. Each group of students is encouraged to play four roles, inculding leather factory owners, farmers, environmental officials, and soil testing professionals. Each group of students has to propose solution strategies after discussion and consultation. The study adopts a single group posttest design. The qualitative data were analyzed using content analysis. The quantitative data were analyzed through proportion and Pearson correlation. Results were as follows: (1 The solution strategies identified by the students include: “mutual communication”, “consensus-building”, and “the formation of an environmental committee". (2 More than 80% of students were satisfied with the instruction, and they found it helpful in terms of knowledge and skills in doing surveying. A moderate positive correlation exists between students’ participation and learning satisfaction. A reflection concerning this instruction design along with some recommendations are provided.

  1. The Identification, Implementation, and Evaluation of Critical User Interface Design Features of Computer-Assisted Instruction Programs in Mathematics for Students with Learning Disabilities

    Science.gov (United States)

    Seo, You-Jin; Woo, Honguk

    2010-01-01

    Critical user interface design features of computer-assisted instruction programs in mathematics for students with learning disabilities and corresponding implementation guidelines were identified in this study. Based on the identified features and guidelines, a multimedia computer-assisted instruction program, "Math Explorer", which delivers…

  2. Acquiring Science and Social Studies Knowledge in Kindergarten through Fourth Grade: Conceptualization, Design, Implementation, and Efficacy Testing of Content-Area Literacy Instruction (CALI)

    Science.gov (United States)

    Connor, Carol McDonald; Dombek, Jennifer; Crowe, Elizabeth C.; Spencer, Mercedes; Tighe, Elizabeth L.; Coffinger, Sean; Zargar, Elham; Wood, Taffeta; Petscher, Yaacov

    2017-01-01

    With national focus on reading and math achievement, science and social studies have received less instructional time. Yet, accumulating evidence suggests that content knowledge is an important predictor of proficient reading. Starting with a design study, we developed content-area literacy instruction (CALI) as an individualized (or personalized)…

  3. BBN based Quantitative Assessment of Software Design Specification

    International Nuclear Information System (INIS)

    Eom, Heung-Seop; Park, Gee-Yong; Kang, Hyun-Gook; Kwon, Kee-Choon; Chang, Seung-Cheol

    2007-01-01

    Probabilistic Safety Assessment (PSA), which is one of the important methods in assessing the overall safety of a nuclear power plant (NPP), requires quantitative reliability information of safety-critical software, but the conventional reliability assessment methods can not provide enough information for PSA of a NPP. Therefore current PSA which includes safety-critical software does not usually consider the reliability of the software or uses arbitrary values for it. In order to solve this situation this paper proposes a method that can produce quantitative reliability information of safety-critical software for PSA by making use of Bayesian Belief Networks (BBN). BBN has generally been used to model an uncertain system in many research fields including the safety assessment of software. The proposed method was constructed by utilizing BBN which can combine the qualitative and the quantitative evidence relevant to the reliability of safety critical software. The constructed BBN model can infer a conclusion in a formal and a quantitative way. A case study was carried out with the proposed method to assess the quality of software design specification (SDS) of safety-critical software that will be embedded in a reactor protection system. The intermediate V and V results of the software design specification were used as inputs to the BBN model

  4. Refining SCJ Mission Specifications into Parallel Handler Designs

    Directory of Open Access Journals (Sweden)

    Frank Zeyda

    2013-05-01

    Full Text Available Safety-Critical Java (SCJ is a recent technology that restricts the execution and memory model of Java in such a way that applications can be statically analysed and certified for their real-time properties and safe use of memory. Our interest is in the development of comprehensive and sound techniques for the formal specification, refinement, design, and implementation of SCJ programs, using a correct-by-construction approach. As part of this work, we present here an account of laws and patterns that are of general use for the refinement of SCJ mission specifications into designs of parallel handlers used in the SCJ programming paradigm. Our notation is a combination of languages from the Circus family, supporting state-rich reactive models with the addition of class objects and real-time properties. Our work is a first step to elicit laws of programming for SCJ and fits into a refinement strategy that we have developed previously to derive SCJ programs.

  5. Reactor protection system design using application specific integrated circuits

    International Nuclear Information System (INIS)

    Battle, R.E.; Bryan, W.L.; Kisner, R.A.; Wilson, T.L. Jr.

    1992-01-01

    Implementing reactor protection systems (RPS) or other engineering safeguard systems with application specific integrated circuits (ASICs) offers significant advantages over conventional analog or software based RPSs. Conventional analog RPSs suffer from setpoints drifts and large numbers of discrete analog electronics, hardware logic, and relays which reduce reliability because of the large number of potential failures of components or interconnections. To resolve problems associated with conventional discrete RPSs and proposed software based RPS systems, a hybrid analog and digital RPS system implemented with custom ASICs is proposed. The actual design of the ASIC RPS resembles a software based RPS but the programmable software portion of each channel is implemented in a fixed digital logic design including any input variable computations. Set point drifts are zero as in proposed software systems, but the verification and validation of the computations is made easier since the computational logic an be exhaustively tested. The functionality is assured fixed because there can be no future changes to the ASIC without redesign and fabrication. Subtle error conditions caused by out of order evaluation or time dependent evaluation of system variables against protection criteria are eliminated by implementing all evaluation computations in parallel for simultaneous results. On- chip redundancy within each RPS channel and continuous self-testing of all channels provided enhanced assurance that a particular channel is available and faults are identified as soon as possible for corrective actions. The use of highly integrated ASICs to implement channel electronics rather than the use of discrete electronics greatly reduces the total number of components and interconnections in the RPS to further increase system reliability. A prototype ASIC RPS channel design and the design environment used for ASIC RPS systems design is discussed

  6. CAI多媒體教學軟體之開發模式 Using an Instructional Design Model for Developing a Multimedia CAI Courseware

    Directory of Open Access Journals (Sweden)

    Hsin-Yih Shyu

    1995-09-01

    Full Text Available 無This article outlined a systematic instructional design model for developing a multimedia computer-aided instruction (CAI courseware. The model illustrated roles and tasks as two dimensions necessary in a CAI production teamwork. Four major components (Analysis, Design, Development, and Revise/Evaluation following by totally 25 steps are provided. Eight roles with each competent skills were identified. The model will be useful in serving as a framework for developing a mulrimedia CAI courseware for educators, instructional designers and CAI industry developers.

  7. A systematic design method for robust synthetic biology to satisfy design specifications.

    Science.gov (United States)

    Chen, Bor-Sen; Wu, Chih-Hung

    2009-06-30

    Synthetic biology is foreseen to have important applications in biotechnology and medicine, and is expected to contribute significantly to a better understanding of the functioning of complex biological systems. However, the development of synthetic gene networks is still difficult and most newly created gene networks are non-functioning due to intrinsic parameter uncertainties, external disturbances and functional variations of intra- and extra-cellular environments. The design method for a robust synthetic gene network that works properly in a host cell under these intrinsic parameter uncertainties and external disturbances is the most important topic in synthetic biology. In this study, we propose a stochastic model that includes parameter fluctuations and external disturbances to mimic the dynamic behaviors of a synthetic gene network in the host cell. Then, based on this stochastic model, four design specifications are introduced to guarantee that a synthetic gene network can achieve its desired steady state behavior in spite of parameter fluctuations, external disturbances and functional variations in the host cell. We propose a systematic method to select a set of appropriate design parameters for a synthetic gene network that will satisfy these design specifications so that the intrinsic parameter fluctuations can be tolerated, the external disturbances can be efficiently filtered, and most importantly, the desired steady states can be achieved. Thus the synthetic gene network can work properly in a host cell under intrinsic parameter uncertainties, external disturbances and functional variations. Finally, a design procedure for the robust synthetic gene network is developed and a design example is given in silico to confirm the performance of the proposed method. Based on four design specifications, a systematic design procedure is developed for designers to engineer a robust synthetic biology network that can achieve its desired steady state behavior

  8. The impact of design-based modeling instruction on seventh graders' spatial abilities and model-based argumentation

    Science.gov (United States)

    McConnell, William J.

    Due to the call of current science education reform for the integration of engineering practices within science classrooms, design-based instruction is receiving much attention in science education literature. Although some aspect of modeling is often included in well-known design-based instructional methods, it is not always a primary focus. The purpose of this study was to better understand how design-based instruction with an emphasis on scientific modeling might impact students' spatial abilities and their model-based argumentation abilities. In the following mixed-method multiple case study, seven seventh grade students attending a secular private school in the Mid-Atlantic region of the United States underwent an instructional intervention involving design-based instruction, modeling and argumentation. Through the course of a lesson involving students in exploring the interrelatedness of the environment and an animal's form and function, students created and used multiple forms of expressed models to assist them in model-based scientific argument. Pre/post data were collected through the use of The Purdue Spatial Visualization Test: Rotation, the Mental Rotation Test and interviews. Other data included a spatial activities survey, student artifacts in the form of models, notes, exit tickets, and video recordings of students throughout the intervention. Spatial abilities tests were analyzed using descriptive statistics while students' arguments were analyzed using the Instrument for the Analysis of Scientific Curricular Arguments and a behavior protocol. Models were analyzed using content analysis and interviews and all other data were coded and analyzed for emergent themes. Findings in the area of spatial abilities included increases in spatial reasoning for six out of seven participants, and an immense difference in the spatial challenges encountered by students when using CAD software instead of paper drawings to create models. Students perceived 3D printed

  9. An integrated in silico approach to design specific inhibitors targeting human poly(a-specific ribonuclease.

    Directory of Open Access Journals (Sweden)

    Dimitrios Vlachakis

    Full Text Available Poly(A-specific ribonuclease (PARN is an exoribonuclease/deadenylase that degrades 3'-end poly(A tails in almost all eukaryotic organisms. Much of the biochemical and structural information on PARN comes from the human enzyme. However, the existence of PARN all along the eukaryotic evolutionary ladder requires further and thorough investigation. Although the complete structure of the full-length human PARN, as well as several aspects of the catalytic mechanism still remain elusive, many previous studies indicate that PARN can be used as potent and promising anti-cancer target. In the present study, we attempt to complement the existing structural information on PARN with in-depth bioinformatics analyses, in order to get a hologram of the molecular evolution of PARNs active site. In an effort to draw an outline, which allows specific drug design targeting PARN, an unequivocally specific platform was designed for the development of selective modulators focusing on the unique structural and catalytic features of the enzyme. Extensive phylogenetic analysis based on all the publicly available genomes indicated a broad distribution for PARN across eukaryotic species and revealed structurally important amino acids which could be assigned as potentially strong contributors to the regulation of the catalytic mechanism of PARN. Based on the above, we propose a comprehensive in silico model for the PARN's catalytic mechanism and moreover, we developed a 3D pharmacophore model, which was subsequently used for the introduction of DNP-poly(A amphipathic substrate analog as a potential inhibitor of PARN. Indeed, biochemical analysis revealed that DNP-poly(A inhibits PARN competitively. Our approach provides an efficient integrated platform for the rational design of pharmacophore models as well as novel modulators of PARN with therapeutic potential.

  10. Using Heuristic Task Analysis to Create Web-Based Instructional Design Theory

    Science.gov (United States)

    Fiester, Herbert R.

    2010-01-01

    The first purpose of this study was to identify procedural and heuristic knowledge used when creating web-based instruction. The second purpose of this study was to develop suggestions for improving the Heuristic Task Analysis process, a technique for eliciting, analyzing, and representing expertise in cognitively complex tasks. Three expert…

  11. Towards a framework for attention cueing in instructional animations: Guidelines for research and design

    NARCIS (Netherlands)

    B.B. de Koning (Björn); H.K. Tabbers (Huib); R.M.J.P. Rikers (Remy); G.W.C. Paas (Fred)

    2009-01-01

    textabstractThis paper examines the transferability of successful cueing approaches from text and static visualization research to animations. Theories of visual attention and learning as well as empirical evidence for the instructional effectiveness of attention cueing are reviewed and, based on

  12. The Use of a Well-Designed Instructional Guideline in Online MBA Teaching

    Science.gov (United States)

    Duesing, Robert J.; Ling, Juan; Yang, Jiaqin

    2016-01-01

    This study investigated the positive impact of a teaching practice on student learning outcomes in an online MBA program. An instructional project guideline was developed to help online students enhance their achieving required learning objectives corresponding to five categories of Bloom's Taxonomy. The course learning objectives are based on…

  13. Three worlds of instructional design: State of the art and future directions

    NARCIS (Netherlands)

    Merriënboer, J.J.G. van; Kirschner, P.A.

    Three worlds of ID are distinguished. The World of Knowledge stresses the analysis of learning outcomes in knowledge structures and the selection of instructional strategies for particular outcomes; the World of Learning focuses on particular learning processes and the synthesis of strategies that

  14. Meeting 2020 Workforce Goals: The Role of Industry-College Collaboration and Goals for Instructional Design

    Science.gov (United States)

    Yarnall, Louise

    2014-01-01

    Since the 1990s, federal programs for workforce training have aimed to transform the role of community colleges from narrow contract training to a broader role that encompasses strategic instructional program planning and innovation to support lifelong learning for a changing workforce and economic development (Jacobs & Teahen, 1996). Yet, to…

  15. Making It Happen: Using Differentiated Instruction, Retrofit Framework, and Universal Design for Learning

    Science.gov (United States)

    Stanford, Barbara; Reeves, Stacy

    2009-01-01

    When children of diverse disabilities and students with ELL rulings are included in traditional classrooms, regular education teachers face a dilemma: How to teach the standard curriculum and teach the new inclusion students? How do they teach students with different heritages and linguistic backgrounds? Differentiated Instruction (DI) is content,…

  16. Click, Clack, Moo: Designing Effective Reading Instruction for Children in Preschool and Early Primary Grades

    Science.gov (United States)

    Barclay, Kathy

    2009-01-01

    As teachers have struggled to implement scientifically based instructional practices in reading, some researchers have begun to focus on ways to "boost the value of reading aloud to young children". Such studies seek ways to promote oral language as well as comprehension and vocabulary through read-aloud experiences. Interactive read-alouds…

  17. Applying the Science of Learning: Evidence-Based Principles for the Design of Multimedia Instruction

    Science.gov (United States)

    Mayer, Richard E.

    2008-01-01

    During the last 100 years, a major accomplishment of psychology has been the development of a science of learning aimed at understanding how people learn. In attempting to apply the science of learning, a central challenge of psychology and education is the development of a science of instruction aimed at understanding how to present material in…

  18. Playing, Debugging, Learning: A Proposal between Game and Instructional Designs via Extended Prototyping

    Science.gov (United States)

    Gandolfi, Enrico

    2018-01-01

    This article investigates the phenomenon of open and participative development (e.g. beta testing, Kickstarter projects)--i.e. extended prototyping--in digital entertainment as a potential source of insights for instructional interventions. Despite the increasing popularity of this practice and the potential implications for educators and…

  19. Improving the development of instructional software : Three building-block solutions to interrelate design and production

    NARCIS (Netherlands)

    Boot, E.W.; Merrienboer, J.J.G. van; Theunissen, N.C.M.

    2008-01-01

    Currently, there is a focus on authentic tasks as the driving force for learning in integrated e-learning systems. This sets new criteria for instructional software, which should become much more flexible and allow for domain modeling and pedagogical modeling. A theoretical analysis and a survey (n

  20. A Study in Instructional Design: A Multi-Modal Approach to Business Logistics.

    Science.gov (United States)

    Griffin, Robert E.; And Others

    Pennsylvania State University provided financial grants and support services to faculty members for improvement of instruction. Funds were provided for released time for faculty, audiovisual production materials, and research and evaluation. An extension course in business logistics was developed using these funds. Lecture presentations were…

  1. Promoting Students' Emotions and Achievement--Instructional Design and Evaluation of the ECOLE-Approach

    Science.gov (United States)

    Glaser-Zikuda, Michaela; Fuss, Stefan; Laukenmann, Matthias; Metz, Kerstin; Randler, Christoph

    2005-01-01

    Emotions such as interest and anxiety are part of the learning process as well as cognition and motivation. In view of this, educational science should take emotional aspects of instruction into account. The "ECOLE"-approach ("Emotional and Cognitive Aspects of Learning") presented in this paper is a theoretically guided…

  2. STRUCTURAL AND DESIGN SPECIFICS OF SPACE GRID SYSTEMS

    Directory of Open Access Journals (Sweden)

    G. M. Gasii

    2017-01-01

    Full Text Available The aim of the study is to identify main trends in the development of space grid structures. In order to reach the purpose it is necessary to conduct a review of the known structural concepts, nodal connections and specifics of the space grid structures and to make conclusions on feasibility improvement of the considered structural concepts that make it possible to develop new solutions without disadvantages residing in the analogues. Analysis of papers written by foreign and national scientists and devoted to theoretical, numerical and experimental studies of stress-strain state, influence of different factors on it and geometrical optimization and designing of space grid structures has been conducted in order to achieve the objectives. Space grid structures and, in particular, flat double-layer grid and most frequent nodes have been studied in the paper. The paper contains a short review of the history on development of space grid structures. It has been found that a rapid development of structural designs was caused by scientific and technical progress and, in particular, improvement of physical and mechanical properties of materials, development of calculation methods, application of software systems for simulating behavior of the structure under load, which significantly increased the calculation accuracy and reduced complexity of design. It has been also established that main parameters that have influence on effectiveness of a structural design are geometric dimensions of its modular elements, ratio of its depth to the span. The world experience on development of connection components has been studied in the paper. The paper presents general classification of nodal connections. Main advantages and disadvantages of existing space grid structures are highlighted and it allows to determine possible methods for their improvement. Theoretical research has permitted to establish that the main direction of spatial grid structures improvement

  3. Understanding science teaching effectiveness: examining how science-specific and generic instructional practices relate to student achievement in secondary science classrooms

    Science.gov (United States)

    Mikeska, Jamie N.; Shattuck, Tamara; Holtzman, Steven; McCaffrey, Daniel F.; Duchesneau, Nancy; Qi, Yi; Stickler, Leslie

    2017-12-01

    In order to create conditions for students' meaningful and rigorous intellectual engagement in science classrooms, it is critically important to help science teachers learn which strategies and approaches can be used best to develop students' scientific literacy. Better understanding how science teachers' instructional practices relate to student achievement can provide teachers with beneficial information about how to best engage their students in meaningful science learning. To address this need, this study examined the instructional practices that 99 secondary biology teachers used in their classrooms and employed regression to determine which instructional practices are predictive of students' science achievement. Results revealed that the secondary science teachers who had well-managed classroom environments and who provided opportunities for their students to engage in student-directed investigation-related experiences were more likely to have increased student outcomes, as determined by teachers' value-added measures. These findings suggest that attending to both generic and subject-specific aspects of science teachers' instructional practice is important for understanding the underlying mechanisms that result in more effective science instruction in secondary classrooms. Implications about the use of these observational measures within teacher evaluation systems are discussed.

  4. Novel designs for application specific MEMS pressure sensors.

    Science.gov (United States)

    Fragiacomo, Giulio; Reck, Kasper; Lorenzen, Lasse; Thomsen, Erik V

    2010-01-01

    In the framework of developing innovative microfabricated pressure sensors, we present here three designs based on different readout principles, each one tailored for a specific application. A touch mode capacitive pressure sensor with high sensitivity (14 pF/bar), low temperature dependence and high capacitive output signal (more than 100 pF) is depicted. An optical pressure sensor intrinsically immune to electromagnetic interference, with large pressure range (0-350 bar) and a sensitivity of 1 pm/bar is presented. Finally, a resonating wireless pressure sensor power source free with a sensitivity of 650 KHz/mmHg is described. These sensors will be related with their applications in harsh environment, distributed systems and medical environment, respectively. For many aspects, commercially available sensors, which in vast majority are piezoresistive, are not suited for the applications proposed.

  5. Design - manufacturing and characterization of specific ultrasonic probes

    International Nuclear Information System (INIS)

    Petit, J.

    1985-01-01

    Optimization of ultrasonic examinations requires essentially to determine precisely parameters used for manufacturing of probes and to check characteristics of beams used. The system presented permits an automatic determination of dimensions of beams in conditions which are totally representative of those of their use. In the field of ultrasonic examinations a good estimate or knowledge of sound beams is of great help to solve difficult examination problems. The FRAMATOME's Centre d'Etude et de Recherche en Essais Non Destructifs (CEREND) : (Study and Research Center in Non-Destructive Testing) has developed and elaborated various techniques in order to improve ultrasonic examinations with specific probes. These techniques concern design, manufacturing and characterization of these probes

  6. Novel Designs for Application Specific MEMS Pressure Sensors

    Directory of Open Access Journals (Sweden)

    Erik V. Thomsen

    2010-10-01

    Full Text Available In the framework of developing innovative microfabricated pressure sensors, we present here three designs based on different readout principles, each one tailored for a specific application. A touch mode capacitive pressure sensor with high sensitivity (14 pF/bar, low temperature dependence and high capacitive output signal (more than 100 pF is depicted. An optical pressure sensor intrinsically immune to electromagnetic interference, with large pressure range (0–350 bar and a sensitivity of 1 pm/bar is presented. Finally, a resonating wireless pressure sensor power source free with a sensitivity of 650 KHz/mmHg is described. These sensors will be related with their applications in  harsh environment, distributed systems and medical environment, respectively. For many aspects, commercially available sensors, which in vast majority are piezoresistive, are not suited for the applications proposed.

  7. An overview of field specific designs of microbial EOR

    Energy Technology Data Exchange (ETDEWEB)

    Robertson, E.P.; Bala, G.A.; Fox, S.L.; Jackson, J.D.; Thomas, C.P.

    1995-12-01

    The selection and design of a microbial enhanced oil recovery (MEOR) process for application in a specific field involves geological, reservoir, and biological characterization. Microbially mediated oil recovery mechanisms (biogenic gas, biopolymers, and biosurfactants) are defined by the types of microorganisms used. The engineering and biological character of a given reservoir must be understood to correctly select a microbial system to enhance oil recovery. The objective of this paper is to discuss the methods used to evaluate three fields with distinct characteristics and production problems for the applicability of MEOR technology. Reservoir characteristics and laboratory results indicated that MEOR would not be applicable in two of the three fields considered. The development of a microbial oil recovery process for the third field appeared promising. Development of a bacterial consortium capable of producing the desired metabolites was initiated and field isolates were characterized.

  8. An overview of field-specific designs of microbial EOR

    Energy Technology Data Exchange (ETDEWEB)

    Robertson, E.P.; Bala, G.A.; Fox, S.L.; Jackson, J.D.; Thomas, C.P. [Idaho National Engineering Lab., Idaho Falls, ID (United States)

    1995-12-31

    The selection and design of an MEOR process for application in a specific field involves geological, reservoir, and biological characterization. Microbially mediated oil recovery mechanisms (bigenic gas, biopolymers, and biosurfactants) are defined by the types of microorganisms used. The engineering and biological character of a given reservoir must be understood to correctly select a microbial system to enhance oil recovery. This paper discusses the methods used to evaluate three fields with distinct characteristics and production problems for the applicability of MEOR would not be applicable in two of the three fields considered. The development of a microbial oil recovery process for the third field appeared promising. Development of a bacterial consortium capable of producing the desired metabolites was initiated, and field isolates were characterized.

  9. A new specifically designed forceps for chest drain insertion.

    LENUS (Irish Health Repository)

    Andrews, Emmet

    2012-02-03

    Insertion of a chest drain can be associated with serious complications. It is recommended that the drain is inserted with blunt dissection through the chest wall but there is no specific instrument to aid this task. We describe a new reusable forceps that has been designed specifically to facilitate the insertion of chest drains.A feasibility study of its use in patients who required a chest drain as part of elective cardiothoracic operations was undertaken. The primary end-point was successful and accurate placement of the drain. The operators also completed a questionnaire rating defined aspects of the procedure. The new instrument was used to insert the chest drain in 30 patients (19 male, 11 female; median age 61.5 years (range 16-81 years)). The drain was inserted successfully without the trocar in all cases and there were no complications. Use of the instrument rated as significantly easier relative to experience of previous techniques in all specified aspects. The new device can be used to insert intercostal chest drains safely and efficiently without using the trocar or any other instrument.

  10. Is it Possible to Design a Math-Art Instructional Practice? Cases of Pre-service Teachers

    Directory of Open Access Journals (Sweden)

    Işıkhan UĞUREL

    2013-10-01

    Full Text Available To many people, establishing relationships between mathematics and art is difficult or surprising. However, these two disciplines are quite interrelated. Today, the literature of mathematics reveals that there has been an increasing interest in interaction between these two disciplines. As also observed in our country, the studies on relationships between mathematics and art have gained more popularity in mathematics education. There is a course entitled, “Mathematics and Art” offered as one of elective courses and taught for ten years to juniors of the Department of Secondary Mathematics Education, Dokuz Eylül University. The course covers a wide range of activities derived from relationships between mathematics and music to activities derived from those between mathematics and handicraft. In this study, cases of pre-service teachers attending this course were analysed. They were asked to do an instructional design integrating mathematics into art at secondary education level. Their designs were analyzed based on the use of art in which contexts and for what purposes. Furthermore, their designs were analyzed in terms of whether they enhance learning. This qualitative study had a case study design. The participants were 43 pre-service mathematics teachers voluntarily selected from students taking the course. Descriptive analysis was done to analyze the data. As a consequence of the analysis, math-art instructional practices developed by pre-service teachers were clustered under three primary categories (good, average and inadequate. The majority of math-art instructional practices were categorized under the average category. In the study, these categories were described and cases in each category were discussed.

  11. ASIE Model: An Innovative Instructional Design Model for Teachers in Enhancing and Sustaining the Quality of the 21st Century Learning

    OpenAIRE

    Ismail Md Zain

    2017-01-01

    An effective and systematic design of instruction will determine the quality of learning and teaching practices. Hence, instructional design models are required, to move from just adopting a standard approach to developing models that have an impact on learners' profiles, creating a much better learning experience, skills, and knowledge both in the classroom and online. The 21st Century Learning Framework requires learners to develop their thinking skills, communication skills, collaborating ...

  12. Logic Programs as a Specification and Description Tool in the Design Process of an Intelligent Tutoring System

    OpenAIRE

    Möbus, Claus

    1987-01-01

    We propose the use of logic programs when designing intelligent tutoring systems. With their help we specified the small-step semantics of the learning curriculum, designed the graphical user interface, derived instructions and modelled students' knowledge.

  13. Animating Instructional Materials in Computer Education: An Approach to Designing and Teaching Concepts in Data Structures Using LATEX

    Directory of Open Access Journals (Sweden)

    Damilola Osikoya

    2012-08-01

    Full Text Available Animation gives a different perception on what is being visually presented. Research has shown that students are likely to understand what is being taught from the combination of animation and text than just with text. Students easily understand scientific concepts in narrative and animated forms. Data structure is a way of storing and arranging data. The efficacy of searching these stored data is very important, so is it vital that they are stored with the right algorithm. This paper presents animations designed to support teaching in computer education. Our main focus is to present controlled animated instructional materials in teaching topics in data structures. We have created three scientifically animated instructional materials in data structures consisting of the Stacks, Queues and Trees. These scientific spheres have been chosen to demonstrate the basic ideas of this work, because of its simplicity in representing the animations. We hope to develop reasonable sets of instructional material of different subject areas that will be stored in a database repository. These are intended to be delivered to students through an e-learning website and/or Mobile phones to support them with additional learning opportunities.

  14. Climate-specific design of tropical housing and buildings (Garissa ...

    African Journals Online (AJOL)

    design stages to make better use of passive solar energy in urban planning and building design for better indoor ... Keywords:Climatic design, Solar energy, Passive architecture, Thermal comfort, Human comfort, ARCHIPAK, Garissa, Kenya.

  15. Browsing while reading: effects of instructional design and learners' prior knowledge

    Directory of Open Access Journals (Sweden)

    Theimo Müller-Kalthoff

    2006-12-01

    Full Text Available One of the key reasons that multimedia, and particularly hypertext systems, are gaining in importance is that they inspire hopes of optimizing learners' processes of knowledge construction. The present study is concerned with the respective influence of individual learner variables (i.e. particularly domain-specific prior knowledge on the use of different design attributes. Thirty-six university students worked through a hierarchically structured two-part hypertext about the psychology of memory under two experimental browsing conditions (reduced versus free browsing. Results show that deeper-level comprehension (i.e. structural knowledge was predicted by the interaction of experimental condition and prior knowledge, but that simply retaining facts was not. Participants with low prior knowledge performed better on the comprehension test if they had worked on the version with reduced access. Moreover, the version with reduced access helped to reduce feelings of disorientation. The measure of disorientation also appeared to be closely linked with the individual's computer experience, self-concept of computer ability and subject-related interest. The main implications for educational practice relate to the design of an adaptive multimedia and hypertext learning system and the successful learning with it.

  16. Measurement of Spray Drift with a Specifically Designed Lidar System.

    Science.gov (United States)

    Gregorio, Eduard; Torrent, Xavier; Planas de Martí, Santiago; Solanelles, Francesc; Sanz, Ricardo; Rocadenbosch, Francesc; Masip, Joan; Ribes-Dasi, Manel; Rosell-Polo, Joan R

    2016-04-08

    Field measurements of spray drift are usually carried out by passive collectors and tracers. However, these methods are labour- and time-intensive and only provide point- and time-integrated measurements. Unlike these methods, the light detection and ranging (lidar) technique allows real-time measurements, obtaining information with temporal and spatial resolution. Recently, the authors have developed the first eye-safe lidar system specifically designed for spray drift monitoring. This prototype is based on a 1534 nm erbium-doped glass laser and an 80 mm diameter telescope, has scanning capability, and is easily transportable. This paper presents the results of the first experimental campaign carried out with this instrument. High coefficients of determination (R² > 0.85) were observed by comparing lidar measurements of the spray drift with those obtained by horizontal collectors. Furthermore, the lidar system allowed an assessment of the drift reduction potential (DRP) when comparing low-drift nozzles with standard ones, resulting in a DRP of 57% (preliminary result) for the tested nozzles. The lidar system was also used for monitoring the evolution of the spray flux over the canopy and to generate 2-D images of these plumes. The developed instrument is an advantageous alternative to passive collectors and opens the possibility of new methods for field measurement of spray drift.

  17. Design of HIFU Transducers to Generate Specific Nonlinear Ultrasound Fields

    Science.gov (United States)

    Khokhlova, Vera A.; Yuldashev, Petr V.; Rosnitskiy, Pavel B.; Maxwell, Adam D.; Kreider, Wayne; Bailey, Michael R.; Sapozhnikov, Oleg A.

    Various clinical applications of high intensity focused ultrasound (HIFU) have different requirements on the pressure level and degree of nonlinear waveform distortion at the focus. Applications that utilize nonlinear waves with developed shocks are of growing interest, for example, for mechanical disintegration as well as for accelerated thermal ablation oftissue. In this work, an inverse problem of determining transducer parameters to enable formation of shockswith desired amplitude at the focus is solved. The solution was obtained by performing multipledirect simulations of the parabolic Khokhlov-Zabolotskaya-Kuznetsov (KZK) equation for various parameters of the source. It is shown that results obtained within the parabolic approximation can be used to describe the focal region of single element spherical sourcesas well as complex transducer arrays. It is also demonstrated that the focal pressure level at which fully developed shocksare formed mainly depends on the focusing angle of the source and only slightly depends on its aperture and operating frequency. Using the simulation results, a 256-element HIFU array operating at 1.5 MHz frequency was designed for a specific application of boiling-histotripsy that relies on the presence of 90-100 MPa shocks at the focus. The size of the array elements and focusing angle of the array were chosen to satisfy technical limitations on the intensity at the array elements and desired shock amplitudes in the focal waveform. Focus steering capabilities of the array were analysed using an open-source T-Array software developed at Moscow State University.

  18. Evolution of the Instructional Design in a Series of Online Workshops | L’évolution d’un design pédagogique dans le développement d’ateliers en ligne

    Directory of Open Access Journals (Sweden)

    Anne Patry

    2015-11-01

    Full Text Available This case recounts the story of the design and production of a series of online workshops for French-speaking healthcare professionals in Canada. The project spans a couple of years and, despite encountering some challenges, succeeds in large part because of its strong foundation: the instructional design. This case study features an instructional designer from a central Canadian university and three SMEs. The main design issues highlighted are the target population’s limited availability for continuing education, the SME’s lack of knowledge of the instructional design process, the magnitude of this project with its national scope but limited time frame and human resources, as well as personnel changes among the SMEs and the instructional design team. This case outlines how the project team deals with these challenges to produce a series of online workshops that provide high quality training in French to healthcare professionals across Canada.

  19. Optimising adherence to childhood pneumonia treatment: the design and development of patient instructions and a job aid for amoxicillin dispersible tablets.

    Science.gov (United States)

    Ebels, Kelly; Faulx, Dunia; Gerth-Guyette, Emily; Murunga, Peninah; Mahapatro, Samarendra; Das, Manoja Kumar; Ginsburg, Amy Sarah

    2016-01-01

    Pneumonia is the leading cause of death from infection in children worldwide. Despite global treatment recommendations that call for children with pneumonia to receive amoxicillin dispersible tablets, only one-third of children with pneumonia receive any antibiotics and many do not complete the full course of treatment. Poor adherence to antibiotics may be driven in part by a lack of user-friendly treatment instructions. In order to optimise childhood pneumonia treatment adherence at the community level, we developed a user-friendly product presentation for caregivers and a job aid for healthcare providers (HCPs). This paper aims to document the development process and offers a model for future health communication tools. We employed an iterative design process that included document review, key stakeholder interviews, engagement with a graphic designer and pre-testing design concepts among target users in India and Kenya. The consolidated criteria for reporting qualitative research were used in the description of results. Though resources for pneumonia treatment are available in some countries, their content is incomplete and inconsistent with global recommendations. Document review and stakeholder interviews provided the information necessary to convey to caregivers and recommendations for how to present this information. Target users in India and Kenya confirmed the need to support better treatment adherence, recommended specific modifications to design concepts and suggested the development of a companion job aid. There was a consensus among caregivers and HCPs that these tools would be helpful and improve adherence behaviours. The development of user-friendly instructions for medications for use in low-resource settings is a critically important but time-intensive and resource-intensive process that should involve engagement with target audiences. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence

  20. Collaboration Mechanism for Equipment Instruction of Multiple Energy Systems

    Science.gov (United States)

    Wang, Dong; Wang, Tuo; Wang, Qi; Zhang, Zhao; Zhao, Mingyu; Wang, Yinghui

    2018-01-01

    When multiple energy systems execute optimization instructions simultaneously, and the same equipment is Shared, the instruction conflict may occur. Aiming at the above problems, taking into account the control objectives of each system, the characteristics of different systems, such as comprehensive clean energy, energy efficiency, and peak filling, etc., designed the instruction coordination mechanism for the daemon. This mechanism mainly acts on the main station of the system, and form a final optimization instruction. For some specific scenarios, the collaboration mechanism of unlocking the terminal is supplemented. The mechanism determines the specific execution instructions based on the arrival time of the instruction. Finally, the experiment in Tianjin eco-city shows that this algorithm can meet the instruction and collaboration requirements of multi-energy systems, and ensure the safe operation of the equipment.

  1. How secondary school students conceptualize infrared radiation-matter interaction? Findings from a research study and implications for an instructional design

    International Nuclear Information System (INIS)

    Hernández, María Isabel; Ríos, Raquel; Pintó, Roser

    2015-01-01

    This study has been carried out within the REVIR scenario, which is a project promoting that secondary school students have access to a computerized laboratory at the Faculty of Education of our university and work in small groups during four hours with specific instructional material. One of the laboratory sessions included in the REVIR project deals with IR radiation-matter interaction, and is addressed to post-compulsory secondary students (16–18 year-old students). Within this framework, we have conducted a research study to analyse students’ conceptualizations of the processes or mechanisms that take place in IR radiation-matter interaction (energy transfer, selective absorption), and its effects at a macroscopic level (temperature increase) and at a molecular level (vibration). For data collection, a question was posed to all students at the end of each REVIR session, asking students to relate what was described in an article about the application of an IR laser for acne treatment to what they had learnt throughout the session. The analysis of the 67 students’ answers to that question revealed that many students explained the effects of the IR laser in vague terms, often repeating information included in the article, without explaining absorption of IR radiation in terms of energy. In consecutive versions of the instructional material, more oriented application questions were added after the article and explicit discussion around synthesis and exploratory (of students’ previous ideas) questions was carried out during the session. From the analysis of 49 and 119 students’ answers in consecutive later versions, we found that the introduction of these changes resulted in a greater number of students’ descriptions in macroscopic and microscopic terms, and a lower number of answers simply repeating information extracted from the reading. Furthermore, more students explicitly explained absorption in terms of energy associated to IR light. Implications

  2. Pre-service teachers' competencies for technology integration: Insights from a mathematics-specific instructional technology course

    NARCIS (Netherlands)

    Agyei, D.D.; Voogt, Joke; Resta, P.

    2012-01-01

    A combination of various measures (self-report, learning outcomes and written reports) was employed to investigate 104 pre-service teachers’ competencies in spreadsheet integration after enrolling in an Instructional Technology course. The pre-service teachers engaged in a “learning technology by

  3. Pre-Service Teachers' TPACK Competencies for Spreadsheet Integration: Insights from a Mathematics-Specific Instructional Technology Course

    Science.gov (United States)

    Agyei, Douglas D.; Voogt, Joke M.

    2015-01-01

    This article explored the impact of strategies applied in a mathematics instructional technology course for developing technology integration competencies, in particular in the use of spreadsheets, in pre-service teachers. In this respect, 104 pre-service mathematics teachers from a teacher training programme in Ghana enrolled in the mathematics…

  4. Pre-service teachers’ TPACK competencies for spreadsheet integration: insights from a mathematics-specific instructional technology course

    NARCIS (Netherlands)

    Agyei, D.D.; Voogt, J.M.

    2015-01-01

    This article explored the impact of strategies applied in a mathematics instructional technology course for developing technology integration competencies, in particular in the use of spreadsheets, in pre-service teachers. In this respect, 104 pre-service mathematics teachers from a teacher training

  5. Flaws in current human training protocols for spontaneous Brain-Computer Interfaces: lessons learned from instructional design

    Directory of Open Access Journals (Sweden)

    Fabien eLotte

    2013-09-01

    Full Text Available While recent research on Brain-Computer Interfaces (BCI has highlighted their potential for many applications, they remain barely used outside laboratories. The main reason is their lack of robustness. Indeed, with current BCI, mental state recognition is usually slow and often incorrect. Spontaneous BCI (i.e., mental imagery-based BCI often rely on mutual learning efforts by the user and the machine, with BCI users learning to produce stable EEG patterns (spontaneous BCI control being widely acknowledged as a skill while the computer learns to automatically recognize these EEG patterns, using signal processing. Most research so far was focused on signal processing, mostly neglecting the human in the loop. However, how well the user masters the BCI skill is also a key element explaining BCI robustness. Indeed, if the user is not able to produce stable and distinct EEG patterns, then no signal processing algorithm would be able to recognize them. Unfortunately, despite the importance of BCI training protocols, they have been scarcely studied so far, and used mostly unchanged for years.In this paper, we advocate that current human training approaches for spontaneous BCI are most likely inappropriate. We notably study instructional design literature in order to identify the key requirements and guidelines for a successful training procedure that promotes a good and efficient skill learning. This literature study highlights that current spontaneous BCI user training procedures satisfy very few of these requirements and hence are likely to be suboptimal. We therefore identify the flaws in BCI training protocols according to instructional design principles, at several levels: in the instructions provided to the user, in the tasks he/she has to perform, and in the feedback provided. For each level, we propose new research directions that are theoretically expected to address some of these flaws and to help users learn the BCI skill more efficiently.

  6. Enabling People with Developmental Disabilities to Actively Follow Simple Instructions and Perform Designated Occupational Activities According to Simple Instructions with Battery-Free Wireless Mice by Controlling Environmental Stimulation

    Science.gov (United States)

    Shih, Ching-Hsiang; Chang, Man-Ling

    2012-01-01

    This study extended Battery-free wireless mouse functionality to assess whether two people with developmental disabilities would be able to actively perform designated simple occupational activities according to simple instructions by controlling their favorite environmental stimulation using Battery-free wireless mice with a newly developed…

  7. Embracing Student Experience in Inclusive Design Education through Learner-Centred Instruction

    Science.gov (United States)

    Altay, Burçak; Ballice, Gülnur; Bengisu, Ebru; Alkan-Korkmaz, Sevinç; Paykoç, Eda

    2016-01-01

    This paper explores the process and outcome of using learner-centred methods to develop students' empathic design abilities during an educational workshop on inclusive design. In the first section of the paper, we suggest the significance of incorporating inclusive design within the education of design disciplines. Then, we introduce a workshop on…

  8. Scaffolding in Assisted Instruction

    Directory of Open Access Journals (Sweden)

    2007-01-01

    Full Text Available On-The-Job Training, developed as direct instruction, is one of the earliest forms of training. This method is still widely in use today because it requires only a person who knows how to do the task, and the tools the person uses to do the task. This paper is intended to be a study of the methods used in education in Knowledge Society, with more specific aspects in training the trainers; as a result of this approach, it promotes scaffolding in assisted instruction as a reflection of the digital age for the learning process. Training the trainers in old environment with default techniques and designing the learning process in assisted instruction, as an application of the Vygotskian concept of the zone of proximal development (ZPD to the area of computer literacy for the younger users, generate diversity in educational communities and requires standards for technology infrastructure, standards for the content, developed as a concepts map, and applications for personalized in-struction, based on ZPD theory.

  9. Conceptual design of small-sized HTGR system (1). Major specifications and system designs

    International Nuclear Information System (INIS)

    Ohashi, Hirofumi; Sato, Hiroyuki; Tazawa, Yujiro; Yan, Xing L.; Tachibana, Yukio

    2011-06-01

    Japan Atomic Energy Agency (JAEA) has started a conceptual design of a 50MWt small-sized high temperature gas cooled reactor (HTGR) for steam supply and electricity generation (HTR50S), which is a first-of-kind of the commercial plant or a demonstration plant of a small-sized HTGR system for steam supply to the industries and district heating and electricity generation by a steam turbine, to deploy in developing countries in the 2030s. The design philosophy is that the HTR50S is a high advanced reactor, which is reducing the R and D risk based on the HTTR design, upgrading the performance and reducing the cost for commercialization by utilizing the knowledge obtained by the HTTR operation and the GTHTR300 design. The major specifications of the HTR50S were determined and targets of the technology demonstration using the HTR50S (e.g., the increasing the power density, reduction of the number of uranium enrichment in the fuel, increasing the burn up, side-by-side arrangement between the reactor pressure vessel and the steam generator) were identified. In addition, the system design of HTR50S, which offers the capability of electricity generation, cogeneration of electricity and steam for a district heating and industries, was performed. Furthermore, a market size of small-sized HTGR systems was investigated. (author)

  10. Designing instruction to support mechanical reasoning: Three alternatives in the simple machines learning environment

    Science.gov (United States)

    McKenna, Ann Frances

    2001-07-01

    Creating a classroom environment that fosters a productive learning experience and engages students in the learning process is a complex endeavor. A classroom environment is dynamic and requires a unique synergy among students, teacher, classroom artifacts and events to achieve robust understanding and knowledge integration. This dissertation addresses this complex issue by developing, implementing, and investigating the simple machines learning environment (SIMALE) to support students' mechanical reasoning and understanding. SIMALE was designed to support reflection, collaborative learning, and to engage students in generative learning through multiple representations of concepts and successive experimentation and design activities. Two key components of SIMALE are an original web-based software tool and hands-on Lego activities. A research study consisting of three treatment groups was created to investigate the benefits of hands-on and web-based computer activities on students' analytic problem solving ability, drawing/modeling ability, and conceptual understanding. The study was conducted with two populations of students that represent a diverse group with respect to gender, ethnicity, academic achievement and social/economic status. One population of students in this dissertation study participated from the Mathematics, Engineering, and Science Achievement (MESA) program that serves minorities and under-represented groups in science and mathematics. The second group was recruited from the Academic Talent Development Program (ATDP) that is an academically competitive outreach program offered through the University of California at Berkeley. Results from this dissertation show success of the SIMALE along several dimensions. First, students in both populations achieved significant gains in analytic problem solving ability, drawing/modeling ability, and conceptual understanding. Second, significant differences that were found on pre-test measures were eliminated

  11. Dowel Bar Retrofit Mix Design and Specification : Technical Report

    Science.gov (United States)

    2012-01-01

    Current INDOT specifications for repair materials to be used in dowel bar retrofit (DBR) applications (Sections 507.08 and 901.07 of INDOTs Book of Specifications) are based, in large part, on the requirements of ASTM C 928 and the manufacturer-pr...

  12. Designing evidence-based medicine training to optimize the transfer of skills from the classroom to clinical practice: applying the four component instructional design model.

    Science.gov (United States)

    Maggio, Lauren A; Cate, Olle Ten; Irby, David M; O'Brien, Bridget C

    2015-11-01

    Evidence-based medicine (EBM) skills, although taught in medical schools around the world, are not optimally practiced in clinical environments because of multiple barriers, including learners' difficulty transferring EBM skills learned in the classroom to clinical practice. This lack of skill transfer may be partially due to the design of EBM training. To facilitate the transfer of EBM skills from the classroom to clinical practice, the authors explore one instructional approach, called the Four Component Instructional Design (4C/ID) model, to guide the design of EBM training. On the basis of current cognitive psychology, including cognitive load theory, the premise of the 4C/ID model is that complex skills training, such as EBM training, should include four components: learning tasks, supportive information, procedural information, and part-task practice. The combination of these four components can inform the creation of complex skills training that is designed to avoid overloading learners' cognitive abilities; to facilitate the integration of the knowledge, skills, and attitudes needed to execute a complex task; and to increase the transfer of knowledge to new situations. The authors begin by introducing the 4C/ID model and describing the benefits of its four components to guide the design of EBM training. They include illustrative examples of educational practices that are consistent with each component and that can be applied to teaching EBM. They conclude by suggesting that medical educators consider adopting the 4C/ID model to design, modify, and/or implement EBM training in classroom and clinical settings.

  13. Specific Cooperative Analysis and Design in General Hypermedia Development

    DEFF Research Database (Denmark)

    Grønbæk, Kaj; Mogensen, Preben Holst

    1994-01-01

    activities. We demonstrate how these activities informed the general hypermedia framework and application design. Use scenarios and prototypes with example data from the users’ daily work were used as sources both to trigger design ideas and new insights regarding work practice. Mutual challenging...

  14. A requirements specification for a software design support system

    Science.gov (United States)

    Noonan, Robert E.

    1988-01-01

    Most existing software design systems (SDSS) support the use of only a single design methodology. A good SDSS should support a wide variety of design methods and languages including structured design, object-oriented design, and finite state machines. It might seem that a multiparadigm SDSS would be expensive in both time and money to construct. However, it is proposed that instead an extensible SDSS that directly implements only minimal database and graphical facilities be constructed. In particular, it should not directly implement tools to faciliate language definition and analysis. It is believed that such a system could be rapidly developed and put into limited production use, with the experience gained used to refine and evolve the systems over time.

  15. Cultivating Collaborations: Site Specific Design for Embodied Science Learning.

    Science.gov (United States)

    Gill, Katherine; Glazier, Jocelyn; Towns, Betsy

    2018-05-21

    Immersion in well-designed outdoor environments can foster the habits of mind that enable critical and authentic scientific questions to take root in students' minds. Here we share two design cases in which careful, collaborative, and intentional design of outdoor learning environments for informal inquiry provide people of all ages with embodied opportunities to learn about the natural world, developing the capacity for understanding ecology and the ability to empathize, problem-solve and reflect. Embodied learning, as facilitated by and in well-designed outdoor learning environments, leads students to develop new ways of seeing, new scientific questions, new ways to connect with ideas, with others and new ways of thinking about the natural world. Using examples from our collaborative practices as experiential learning designers, we illustrate how creating the habits of mind critical to creating scientists, science-interested, and science-aware individuals benefits from providing students spaces to engage in embodied learning in nature. We show how public landscapes designed in creative partnerships between educators, scientists, designers and the public have potential to amplify science learning for all.

  16. Processing Instruction: A review of issues

    OpenAIRE

    Muhlisin Rasuki

    2017-01-01

    This paper provides a critical review of Processing Instruction (PI). This type of instructional option was specifically designed to help second/foreign language (L2) learners grasp meaning manifested in the use of particular grammatical forms in a target language effectively through the provision of input. In this way, PI attempts to help learners develop grammatical competence in a target language in ways that foster their comprehension and production skills. The paper starts with outlining...

  17. IMS Learning Design Specification (version 1.0)

    NARCIS (Netherlands)

    Koper, Rob; Olivier, Bill; Anderson, Thor

    2003-01-01

    Information Model is the core document with the actual specification, the other documents and schema's are derived from the Information Model. When you see any inconsistency between documents, look at the Information Model for the correct interpretation.

  18. Formal methods in design and verification of functional specifications

    International Nuclear Information System (INIS)

    Vaelisuo, H.

    1995-01-01

    It is claimed that formal methods should be applied already when specifying the functioning of the control/monitoring system, i.e. when planning how to implement the desired operation of the plant. Formal methods are seen as a way to mechanize and thus automate part of the planning. All mathematical methods which can be applied on related problem solving should be considered as formal methods. Because formal methods can only support the designer, not replace him/her, they must be integrated into a design support tool. Such a tool must also aid the designer in getting the correct conception of the plant and its behaviour. The use of a hypothetic design support tool is illustrated to clarify the requirements such a tool should fulfill. (author). 3 refs, 5 figs

  19. Instructional designing the STEM education model for fostering creative thinking abilities in physics laboratory environment classes

    Science.gov (United States)

    Chanthala, Chumpon; Santiboon, Toansakul; Ponkham, Kamon

    2018-01-01

    To investigate the effects of students' activity-based on learning approaching management through the STEM Education Instructional Model for fostering their creative thinking abilities of their learning achievements in physics laboratory classroom environments with the sample size consisted of 48 students at the 10th grade level in two classes in Mahasarakham University Demonstration School(Secondary Division) in Thailand. Students' creative thinking abilities were assessed with the with the 24-item GuilfordCreative Thinking Questionnaire (GCTQ). Students' perceptions of their physics classroom learning environments were obtained using the 35-item Physics Laboratory Environment Inventory (PLEI). Associations between students' learning achievements of their post-test assessment indicated that 26% of the coefficient predictive value (R2) of the variance in students' creative thinking abilities was attributable to their perceptions for the GCTQ. Students' learning outcomes of their post-test assessment, the R2value indicated that 35% of the variances for the PLEI, the R2value indicated that 63% of the variances for their creative thinking abilities were attributable to theiraffecting the activity-based on learning for fostering their creative thinking are provided.

  20. Implementation of an active instructional design for teaching the concepts of current, voltage and resistance

    Science.gov (United States)

    Orlaineta-Agüero, S.; Del Sol-Fernández, S.; Sánchez-Guzmán, D.; García-Salcedo, R.

    2017-01-01

    In the present work we show the implementation of a learning sequence based on an active learning methodology for teaching Physics, this proposal tends to promote a better learning in high school students with the use of a comic book and it combines the use of different low-cost experimental activities for teaching the electrical concepts of Current, Resistance and Voltage. We consider that this kind of strategy can be easily extrapolated to higher-education levels like Engineering-college/university level and other disciplines of Science. To evaluate this proposal, we used some conceptual questions from the Electric Circuits Concept Evaluation survey developed by Sokoloff and the results from this survey was analysed with the Normalized Conceptual Gain proposed by Hake and the Concentration Factor that was proposed by Bao and Redish, to identify the effectiveness of the methodology and the models that the students presented after and before the instruction, respectively. We found that this methodology was more effective than only the implementation of traditional lectures, we consider that these results cannot be generalized but gave us the opportunity to view many important approaches in Physics Education; finally, we will continue to apply the same experiment with more students, in the same and upper levels of education, to confirm and validate the effectiveness of this methodology proposal.

  1. Making Communication Matter: Integrating Instruction, Projects and Assignments to Teach Writing and Design

    Science.gov (United States)

    Riddell, William T.; Courtney, Jennifer; Constans, Eric; Dahm, Kevin; Harvey, Roberta; von Lockette, Paris

    2010-01-01

    An integrated technical writing and design course has been developed at Rowan University. This course was developed using aspects of project-based learning and recent discussions about design education, as well as pedagogical approaches from the write-to-learn and the writing in the disciplines (WID) movements. The result is a course where the…

  2. Fifth Graders' Learning about Simple Machines through Engineering Design-Based Instruction Using LEGO™ Materials

    Science.gov (United States)

    Marulcu, Ismail; Barnett, Mike

    2013-01-01

    This study is part of a 5-year National Science Foundation-funded project, Transforming Elementary Science Learning Through LEGO™ Engineering Design. In this study, we report on the successes and challenges of implementing an engineering design-based and LEGO™-oriented unit in an urban classroom setting and we focus on the impact of the unit on…

  3. The House of Quality: Using QFD for Instructional Design in Distance Education.

    Science.gov (United States)

    Murgatroyd, Stephen

    1993-01-01

    Examines the use of Quality Function Deployment (QFD) methods for the design, development, and delivery of courses and programs through distance education. Topics discussed include problems in implementing QFD; implementation of QFD in training design; and QFD's contribution to service quality improvement in distance education. (Contains 28…

  4. The future of the IMS Learning Design specification: a critical look

    NARCIS (Netherlands)

    Sloep, Peter

    2009-01-01

    P. B. Sloep (2009). The future of the IMS Learning Design specification: a critical look. Presentation at the IMS Learning Design seminar 'The future of IMS Learning Design'. December, 10, 2009, Wollongong, Australia: University of Wollongong.

  5. Tissue-specific designs of stem cell hierarchies

    NARCIS (Netherlands)

    Visvader, Jane E.; Clevers, Hans

    2016-01-01

    Recent work in the field of stem cell biology suggests that there is no single design for an adult tissue stem cell hierarchy, and that different tissues employ distinct strategies to meet their self-renewal and repair requirements. Stem cells may be multipotent or unipotent, and can exist in

  6. Tissue-specific designs of stem cell hierarchies

    NARCIS (Netherlands)

    Visvader, Jane E; Clevers, Hans

    Recent work in the field of stem cell biology suggests that there is no single design for an adult tissue stem cell hierarchy, and that different tissues employ distinct strategies to meet their self-renewal and repair requirements. Stem cells may be multipotent or unipotent, and can exist in

  7. Designing English for Specific Purposes Course for Computer Science Students

    Science.gov (United States)

    Irshad, Isra; Anwar, Behzad

    2018-01-01

    The aim of this study was to design English for Academic Purposes (EAP) course for University students enrolled in the Computer Science Department. For this purpose, academic English language needs of the students were analyzed by using a 5 point Likert scale questionnaire. Additionally, interviews were also conducted with four faculty members of…

  8. Equipment Specific Optimum Blast-Design Using Genetic Algorithm

    Directory of Open Access Journals (Sweden)

    Rahul Upadhyay

    2015-08-01

    Full Text Available Design of blasting parameters plays an important role in the optimization of mining cost as well as cost of subsequent processing of ore. Drilling and handling costs are the major mining cost. This work presents an indirect optimization model for mining cost through optimization of blasting parameters for a particular set of drilling and loading equipment.

  9. Hypothetical learning trajectory design on the history of Indonesian independence struggle in Mathematics logic instruction

    Directory of Open Access Journals (Sweden)

    Dra Nurjanah

    2017-12-01

    Full Text Available The research was aimed at developing learning resources for mathematics logic using the hypothetical learning trajectory designed through reflection on the history of Indonesian independence struggle. The study was carried out at the Department of Mathematics Education of the Faculty of Teacher Training and Educational Sciences Nusantara Islamic University (Uninus. The study used design research consisted of three stages: preparing the experiments, design the experiments, and retrospective analysis. Preparing the experiments stage has been completed and design the experiments stage is currently under preparation. The main activities accomplished in preparing the experiments stage consisted of: studies of Indonesian independence struggle, curriculum analysis, literature review, and early prototype design. Design the experiments phase has enabled the development of the research instruments. The learning trajectory which has been designed in the first stage involved: reflections on the history of Indonesian independence struggle; implication and bi-implication; implication, bi-implication and their truth in the context of the history of the Indonesian independence struggle; and implication, bi-implication and their truth in the context of mathematics. Based on the results of discussions with colleagues, the students’ ability in mathematical thinking can be developed by using the history of Indonesian independence struggle as the context of learning in a mathematics logics course.

  10. Designing instruction and learning for cognitively gifted pupils in preschool and primary school

    NARCIS (Netherlands)

    Mooij, Ton

    2012-01-01

    Mooij, T. (2013). Designing education and learning for cognitively gifted pupils in preschool and primary school. International Journal of Inclusive Education, 17(6), 597-613. doi:10.1080/13603116.2012.696727

  11. The design and application of effective written instructional material: a review of published work.

    Science.gov (United States)

    Mayberry, John F

    2007-09-01

    This review will consider the evidence base for the format of educational material drawing on academic papers and the practice of the design industry. The core issues identified from the review are drawn together in guidelines for educational posters, text and web based material. The review deals with the design of written material both for use in leaflets and books as well as the impact of factors such as font type and size as well as colour on poster design. It sets these aspects of educational material within a research framework, which looks at impact on learning and subsequent change in practice. These issues are examined through a practical example of a poster designed for a regional gastroenterology meeting.

  12. Septa design for a prostate specific PET camera

    International Nuclear Information System (INIS)

    Qi, Jinyi; Huber, Jennifer S.; Huesman, Ronald H.; Moses, William W.; Derenzo, Stephen E.; Budinger, Thomas F.

    2003-01-01

    The recent development of new prostate tracers has motivated us to build a low cost PET camera optimized to image the prostate. Coincidence imaging of positron emitters is achieved using a pair of external curved detector banks. The bottom bank is fixed below the patient bed, and the top bank moves upward for patient access and downward for maximum sensitivity. In this paper, we study the design of septa for the prostate camera using Monte Carlo simulations. The system performance is measured by the detectability of a prostate lesion. We have studied 17 septa configurations. The results show that the design of septa has a large impact on the lesion detection at a given activity concentration. Significant differences are also observed between the lesion detectability and the conventional noise equivalent count (NEC) performance, indicating that the NEC is not appropriate for the detection task

  13. Challenges in resonant cavity biosensor design: collection efficiency and specificity

    Science.gov (United States)

    Armani, Andrea M.; Mehrabani, Simin; Sun, Victoria; McBirney, Samantha; Hawk, Rasheeda M.; Gungor, Eda; Lee, Michele

    2014-03-01

    Optical cavities have successfully demonstrated the ability to detect a wide range of analytes with exquisite sensitivity. However, optimizing other parameters of the system, such as collection efficiency and specificity, have remained elusive. This presentation will discuss some of the recent work in this area, including 3D COMSOL Multiphysics models including mass transfer and binding kinetics of different cavity geometries and covalent attachment methods for a wide range of biological and synthetic moieties. A few representative experimental demonstrations will also be presented.

  14. The design of instructional tools affects secondary school students' learning of cardiopulmonary resuscitation (CPR) in reciprocal peer learning: a randomized controlled trial.

    Science.gov (United States)

    Iserbyt, Peter; Byra, Mark

    2013-11-01

    Research investigating design effects of instructional tools for learning Basic Life Support (BLS) is almost non-existent. To demonstrate the design of instructional tools matter. The effect of spatial contiguity, a design principle stating that people learn more deeply when words and corresponding pictures are placed close (i.e., integrated) rather than far from each other on a page was investigated on task cards for learning Cardiopulmonary Resuscitation (CPR) during reciprocal peer learning. A randomized controlled trial. A total of 111 students (mean age: 13 years) constituting six intact classes learned BLS through reciprocal learning with task cards. Task cards combine a picture of the skill with written instructions about how to perform it. In each class, students were randomly assigned to the experimental group or the control. In the control, written instructions were placed under the picture on the task cards. In the experimental group, written instructions were placed close to the corresponding part of the picture on the task cards reflecting application of the spatial contiguity principle. One-way analysis of variance found significantly better performances in the experimental group for ventilation volumes (P=.03, ηp2=.10) and flow rates (P=.02, ηp2=.10). For chest compression depth, compression frequency, compressions with correct hand placement, and duty cycles no significant differences were found. This study shows that the design of instructional tools (i.e., task cards) affects student learning. Research-based design of learning tools can enhance BLS and CPR education. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

  15. Case Studies of Secondary School Teachers Designing Socioscientific Issues-Based Instruction and Their Students' Socioscientific Reasoning

    Science.gov (United States)

    Karahan, Engin

    Addressing socioscientific issues (SSI) has been one of the main focuses in science education since the Science, Technology, and Society (STS) movement in the 1970s (Levinson, 2006); however, teaching controversial socioscientific issues has always been challenging for teachers (Dillon, 1994; Osborne, Duschl, & Fairbrother, 2002). Although teachers exhibit positive attitudes for using controversial socioscientific issues in their science classrooms, only a small percentage of them actually incorporate SSI content into their science curricula on a regular basis (Sadler, Amirshokoohi, Kazempour, & Allspaw, 2006; Lee & Witz, 2009). The literature in science education has highlighted the signi?cant relationships among teacher beliefs, teaching practices, and student learning (Bryan & Atwater, 2002; King, Shumow, & Lietz, 2001; Lederman, 1992). Despite the fact that the case studies present a relatively detailed picture of teachers' values and motivations for teaching SSI (e.g. Lee, 2006; Lee & Witz, 2009; Reis & Galvao, 2004), these studies still miss the practices of these teachers and potential outcomes for their students. Therefore, there is a great need for in-depth case studies that would focus on teachers' practices of designing and teaching SSI-based learning environments, their deeper beliefs and motivations for teaching SSI, and their students' response to these practices (Lee, 2006). This dissertation is structured as three separate, but related, studies about secondary school teachers' experiences of designing and teaching SSI-based classes and their students' understanding of science and SSI reasoning. The case studies in this dissertation seek answers for (1) teachers' practices of designing and teaching SSI-based instruction, as well as its relation to their deeper personal beliefs and motivations to teach SSI, and (2) how their students respond to their approaches of teaching SSI in terms of their science understanding and SSI reasoning. The first paper

  16. A Proposed Multimedia Cone of Abstraction: Updating a Classic Instructional Design Theory

    Science.gov (United States)

    Baukal, Charles E.; Ausburn, Floyd B.; Ausburn, Lynna J.

    2013-01-01

    Advanced multimedia techniques offer significant learning potential for students. Dale (1946, 1954, 1969) developed a Cone of Experience (CoE) which is a hierarchy of learning experiences ranging from direct participation to abstract symbolic expression. This paper updates the CoE for today's technology and learning context, specifically focused…

  17. Catalog of Vocational Education and Related Programs Designed for Instruction of American Indians.

    Science.gov (United States)

    McBain, Susan; And Others

    To plan a curriculum for a vocationally based community school in Navajo, New Mexico, the Navajo Department of Education (with assistance from the American Institutes for Research) surveyed the nation for vocational education programs which had been developed or adapted specifically for use with American Indians or Alaska Natives. State directors…

  18. Applying Cognitive Psychology Based Instructional Design Principles in Mathematics Teaching and Learning: Introduction

    Science.gov (United States)

    Verschaffel, Lieven; Van Dooren, W.; Star, J.

    2017-01-01

    This special issue comprises contributions that address the breadth of current lines of recent research from cognitive psychology that appear promising for positively impacting students' learning of mathematics. More specifically, we included contributions (a) that refer to cognitive psychology based principles and techniques, such as explanatory…

  19. Using Online Peer Assessment in an Instructional Technology and Material Design Course through Social Media

    Science.gov (United States)

    Demir, Mehmet

    2018-01-01

    This study was designed to investigate the student teachers perceptions about and benefits and challenges of using Facebook as an online peer assessment tool for the student teachers' works. The study group included 24 student teachers in science education department of a state university located in the southeast region of Turkey. A case study…

  20. Social Representations of Cybersecurity by University Students and Implications for Instructional Design

    Science.gov (United States)

    Pawlowski, Suzanne D.; Jung, Yoonhyuk

    2015-01-01

    Cybersecurity has become an essential topic in introductory information systems (IS) core courses. As an aid to course design, the exploratory research in this paper uses a social representations lens to elucidate the perceptions of cybersecurity and cybersecurity threats held by students. Analysis of qualitative survey data from 152 students at a…

  1. A Novel Instructional Approach to the Design of Standard Controllers: Using Inversion Formulae

    Science.gov (United States)

    Ntogramatzidis, Lorenzo; Zanasi, Roberto; Cuoghi, Stefania

    2014-01-01

    This paper describes a range of design techniques for standard compensators (Lead-Lag networks and PID controllers) that have been applied to the teaching of many undergraduate control courses throughout Italy over the last twenty years, but that have received little attention elsewhere. These techniques hinge upon a set of simple formulas--herein…

  2. Toward a Current, Comprehensive, Integrative, and Flexible Model of Motivation for Instructional Design

    Science.gov (United States)

    Hardre, Patricia L.; Miller, Raymond B.

    2006-01-01

    Workplace motivation historically has been an HR function, with ID as a training function. This division produces a split between motivation and training, leaving them isolated from one another. Intervention design needs to include motivation throughout its phases, to maximize motivating opportunities for performance improvement. The current…

  3. Assessment in the Context of Mathematics Instruction Reform: The Design of Assessment in the QUASAR Project.

    Science.gov (United States)

    Silver, Edward A.; Lane, Suzanne

    Recent reports on mathematics education reform have focused the attention of educational practitioners and policymakers on new goals for mathematics education and new descriptions of mathematical proficiency. QUASAR is a national project (Quantitative Understanding: Amplifying Student Achievement and Reasoning) designed to improve the mathematics…

  4. Inclusive Instruction: Perceptions of Community College Faculty and Students Pertaining to Universal Design

    Science.gov (United States)

    Gawronski, Michael; Kuk, Linda; Lombardi, Allison R.

    2016-01-01

    This study examined community college faculty (n = 179) and student (n = 449) attitudes and actions toward inclusive teaching practices based on tenets of Universal Design. Two online surveys, the Inclusive Teaching Strategies Inventory (ITSI) and the Inclusive Teaching Strategies Inventory-Student (ITSI-S), were administered at a medium-sized…

  5. Transfer of Learning in Management Training: Building the Payoff Into the Instructional Design.

    Science.gov (United States)

    Kruger, Michael J.; May, Gregory D.

    1986-01-01

    Describes two reinforcement techniques designed to ensure transfer of learning from management training courses to the workplace: (1) participant journal writing to capture management insights occurring during training and (2) support groups providing encouragement, feedback, and accountability. Results of an evaluation of the techniques'…

  6. Dialectical Inquiry as an Instructional Heuristic in Organization Theory and Design.

    Science.gov (United States)

    Dehler, Gordon E.; Welsh, M. Ann

    1993-01-01

    A strategy for teaching undergraduate organization theory and design uses dialectical inquiry (thesis-antithesis-synthesis) and involves students actively in classroom learning. Concepts are introduced through dichotomies as typically introduced in texts; discussion elaborates grey areas. Case analysis by this method conveys the often ambiguous…

  7. Debunking the Librarian "Gene": Designing Online Information Literacy Instruction for Incoming Library Science Students

    Science.gov (United States)

    Lamb, Annette

    2017-01-01

    Information workers are not born information fluent. Like other students, incoming library science students enter graduate programs with a broad range of information and technology skills. The aim of this study was to determine if systematically designed online tutorials would be effective in preparing university students with information literacy…

  8. Innovation in Higher Education: The Influence of Classroom Design and Instructional Technology

    Science.gov (United States)

    Siegel, Christine; Claydon, Jennifer

    2016-01-01

    The current work seeks to explore University professors' perspectives on teaching and learning in an innovative classroom characterized by flexible design of space, furniture and technology. The study took place during the 2015-2016 academic year at Fairfield University, a Masters comprehensive university in the Northeastern United States.…

  9. Web Consulting for Non-Academic Educational Missions: How Instructional Design Offers a Competitive Advantage

    Science.gov (United States)

    Cates, Ward Mitchell; Mattke, Paige Hawkins

    2013-01-01

    Based on a recently completed study of education directors at science museums, this article addresses how design-and-development consultants might use those findings to enhance the way in which they propose and deliver Website services to non-academic organizations with either primary or complementary educational missions. After a very brief…

  10. An Approach to Participatory Instructional Design in Secondary Education: An Exploratory Study

    Science.gov (United States)

    Konings, Karen D.; Brand-Gruwel, Saskia; van Merrienboer, Jeroen J. G.

    2010-01-01

    Background: Teachers have limited insight in students' perspectives on education, although these perspectives influence quality of learning. As students' and teachers' perspectives differ considerably, there is a need for teachers to learn more about students' experiences and ideas about education. Participatory design might be a good strategy for…

  11. Designing and Using an Open Graphic Interface for Instruction in Geometrical Optics.

    Science.gov (United States)

    Ronen, Miky; And Others

    1993-01-01

    Discusses conceptual difficulties in the field of geometrical optics and describes RAY, a microcomputer-based graphic interface that was designed to serve as a teaching aid and as a learning environment. The ability to combine theory and formal representations with real demonstrations and experiments is discussed. (Contains seven references.) (LRW)

  12. Teaching in Cyberspace: Online versus Traditional Instruction Using a Waiting-List Experimental Design

    Science.gov (United States)

    Poirier, Christopher R.; Feldman, Robert S.

    2004-01-01

    To test the effectiveness of an online introductory psychology course, we randomly assigned students to a large, traditional course or to an online course from a population of students who indicated that either course type was acceptable using a "waiting list" experimental design. Students in the online course performed better on exams and equally…

  13. Instructional Design Changes in an Undergraduate A&P Course to Facilitate Student Engagement and Interest

    Science.gov (United States)

    Hurtt, Barbekka; Bryant, Jennifer

    2016-01-01

    We describe changes in an undergraduate anatomy and physiology (A&P) curriculum designed to address educational goals at a private, comprehensive university. Educational goals included making course material more relevant to students' future career interests, exposing students to professionals in their careers of interest, and incorporating…

  14. Exemplary Design Envelope Specification for Standard Modular Hydropower Technology

    Energy Technology Data Exchange (ETDEWEB)

    Witt, Adam M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Smith, Brennan T. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Tsakiris, Achilleas [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Univ. of Tennessee, Knoxville, TN (United States); Papanicolaou, Thanos [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Univ. of Tennessee, Knoxville, TN (United States); Pries, Jason L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Burress, Timothy A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Stewart, Kevin M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Lee, Kyutae [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); DeNeale, Scott T. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Bevelhimer, Mark S. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Pracheil, Brenda M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); McManamay, Ryan A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Ekici, Kivanc [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Univ. of Tennessee, Knoxville, TN (United States); Kutz, Benjamin [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Univ. of Tennessee, Knoxville, TN (United States); Curd, Shelaine L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Bishop, Norm [Knight Piesold, Denver, CO (United States); Welch, Tim [U.S. Department of Energy (DOE), Washington, DC (United States). Office of Energy Efficiency and Renewable Energy (EERE); Rabon, Daniel [U.S. Department of Energy (DOE), Washington, DC (United States). Office of Energy Efficiency and Renewable Energy (EERE); Fernandez, Alisha [McKeown and Associates, Moberly, MO (United States)

    2017-02-01

    Hydropower is an established, affordable renewable energy generation technology supplying nearly 18% of the electricity consumed globally. A hydropower facility interacts continuously with the surrounding water resource environment, causing alterations of varying magnitude in the natural flow of water, energy, fish, sediment, and recreation upstream and downstream. A universal challenge in facility design is balancing the extraction of useful energy and power system services from a stream with the need to maintain ecosystem processes and natural environmental function. On one hand, hydroelectric power is a carbon-free, renewable, and flexible asset to the power system. On the other, the disruption of longitudinal connectivity and the artificial barrier to aquatic movement created by hydraulic structures can produce negative impacts that stress fresh water environments. The growing need for carbon-free, reliable, efficient distributed energy sources suggests there is significant potential for hydropower projects that can deploy with low installed costs, enhanced ecosystem service offerings, and minimal disruptions of the stream environment.

  15. Self-Regulated Strategy Development Instruction for Teaching Multi-Step Equations to Middle School Students Struggling in Math

    Science.gov (United States)

    Cuenca-Carlino, Yojanna; Freeman-Green, Shaqwana; Stephenson, Grant W.; Hauth, Clara

    2016-01-01

    Six middle school students identified as having a specific learning disability or at risk for mathematical difficulties were taught how to solve multi-step equations by using the self-regulated strategy development (SRSD) model of instruction. A multiple-probe-across-pairs design was used to evaluate instructional effects. Instruction was provided…

  16. NASIS data base management system - IBM 360/370 OS MVT implementation. 4: Program design specifications

    Science.gov (United States)

    1973-01-01

    The design specifications for the programs and modules within the NASA Aerospace Safety Information System (NASIS) are presented. The purpose of the design specifications is to standardize the preparation of the specifications and to guide the program design. Each major functional module within the system is a separate entity for documentation purposes. The design specifications contain a description of, and specifications for, all detail processing which occurs in the module. Sub-modules, reference tables, and data sets which are common to several modules are documented separately.

  17. Professional oral hygiene treatment and detailed oral hygiene instructions in patients affected by mucous membrane pemphigoid with specific gingival localization: a pilot study in 12 patients.

    Science.gov (United States)

    Arduino, P G; Lopetuso, E; Carcieri, P; Giacometti, S; Carbone, M; Tanteri, C; Broccoletti, R

    2012-05-01

    The aim of this prospective case series was to assess the clinical efficiency of an oral hygiene protocol in patients affected by mucous membrane pemphigoid (MMP) with specific gingival localization, before starting any medical treatment. Patients received oral hygiene instruction followed by non-surgical periodontal therapy including oral hygiene instructions in a 3-week cohort study. Clinical outcome variables were recorded at baseline and 5 weeks after intervention and included, as periodontal parameters, full mouth plaque (FMPS) and bleeding (FMBS) scores and patient-related outcomes (visual analogue score of pain). A total of 12 patients were recruited. The mean age at presentation was 59.5 ± 14.52 years. Five weeks after finishing the oral hygiene and periodontal therapy protocol, a statistical significant reduction was observed for FMPS (P = 0.001), FMBS (P = 0.022) and reported pain (P = 0.0028). Professional oral hygiene procedures and non-surgical periodontal therapy are connected with improvement of gingival status and decrease in gingival-related pain, in female patients affected by MMP with specific gingival localization. © 2011 John Wiley & Sons A/S.

  18. Psychosocial Risks Generated By Assets Specific Design Software

    Science.gov (United States)

    Remus, Furtună; Angela, Domnariu; Petru, Lazăr

    2015-07-01

    The human activity concerning an occupation is resultant from the interaction between the psycho-biological, socio-cultural and organizational-occupational factors. Tehnological development, automation and computerization that are to be found in all the branches of activity, the level of speed in which things develop, as well as reaching their complexity, require less and less physical aptitudes and more cognitive qualifications. The person included in the work process is bound in most of the cases to come in line with the organizational-occupational situations that are specific to the demands of the job. The role of the programmer is essencial in the process of execution of ordered softwares, thus the truly brilliant ideas can only come from well-rested minds, concentrated on their tasks. The actual requirements of the jobs, besides the high number of benefits and opportunities, also create a series of psycho-social risks, which can increase the level of stress during work activity, especially for those who work under pressure.

  19. Motivational Measure of the Instruction Compared: Instruction Based on the ARCS Motivation Theory vs Traditional Instruction in Blended Courses

    Science.gov (United States)

    Colakoglu, Ozgur M.; Akdemir, Omur

    2012-01-01

    The ARCS Motivation Theory was proposed to guide instructional designers and teachers who develop their own instruction to integrate motivational design strategies into the instruction. There is a lack of literature supporting the idea that instruction for blended courses if designed based on the ARCS Motivation Theory provides different…

  20. Combinatorial design of a nanobody that specifically targets structured RNAs.

    Science.gov (United States)

    Cawez, F; Duray, E; Hu, Y; Vandenameele, J; Romão, E; Vincke, C; Dumoulin, M; Galleni, M; Muyldermans, S; Vandevenne, M

    2018-04-11

    Recent advances in transcriptome sequencing and analysis have revealed the complexity of the human genome. The majority (≈ 98%) of cellular transcripts is not translated into proteins and represents a vast, unchartered world of functional non-coding RNAs (ncRNAs). Most of them adopt a well-defined 3D structure to achieve their biological functions. However, only very few RNA structures are currently available which reflects the challenges associated with RNA crystallization. Nevertheless, these structures would represent a critical step in understanding functions of ncRNAs and their molecular mechanisms in the cell. The overall goal of this study is to develop an innovative and versatile tool to facilitate the functional study and crystallization of structured RNAs (stRNAs). In this work, we have engineered an antibody fragment from camelid heavy-chain antibody (nanobody) able to specifically bind with low nanomolar affinity to stRNA while no binding could be detected for single-stranded DNA/RNA, double-stranded DNA/RNA or a negatively charged protein. However, this nanobody recognizes different and non-related stRNAs, this observation suggests that it binds to an epitope shared by these stRNAs. Finally, our data also show that the binding of the nanobody doesn't alter the secondary structure content of the stRNA as well as its unfolding/refolding processes during heat treatment. This work constitutes a successful proof-of-concept demonstrating that nanobodies can be engineered to recognize RNA-related epitopes. Copyright © 2018. Published by Elsevier Ltd.

  1. An Evaluation of the Instruction Carried out with Printed Laboratory Materials Designed in Accordance with 5E Model: Reflection of Light and Image on a Plane Mirror

    Science.gov (United States)

    Ayvaci, Hakan Sevki; Yildiz, Mehmet; Bakirci, Hasan

    2015-01-01

    This study employed a print laboratory material based on 5E model of constructivist learning approach to teach reflection of light and Image on a Plane Mirror. The effect of the instruction which conducted with the designed print laboratory material on academic achievements of prospective science and technology teachers and their attitudes towards…

  2. Training Higher Education Teachers for Instructional Design of Competency-based Education: Product-oriented versus Process-oriented Worked Examples

    NARCIS (Netherlands)

    Hoogveld, Bert; Paas, Fred; Jochems, Wim

    2007-01-01

    Teachers involved in the development of competency-based higher education (CBE) are expected to fulfil a new role of instructional designer. As a consequence, they are confronted with the problem to translate abstract new curriculum principles into concrete learning tasks. Recent studies have shown

  3. There is more variation within than across domains: an interview with Paul A. Kirschner about applying cognitive psychology based instructional design principles in mathematics teaching and learning

    NARCIS (Netherlands)

    Kirschner, Paul A.; Verschaffel, Lieven; Star, Jon; Van Dooren, Wim

    2018-01-01

    In this interview we asked Paul A. Kirschner about his comments and reflections regarding the idea to apply cognitive psychology-based instructional design principles to mathematics education and some related issues. With a main focus on cognitive psychology, educational psychology, educational

  4. Cognitive Theory of Multimedia Learning, Instructional Design Principles, and Students with Learning Disabilities in Computer-Based and Online Learning Environments

    Science.gov (United States)

    Greer, Diana L.; Crutchfield, Stephen A.; Woods, Kari L.

    2013-01-01

    Struggling learners and students with Learning Disabilities often exhibit unique cognitive processing and working memory characteristics that may not align with instructional design principles developed with typically developing learners. This paper explains the Cognitive Theory of Multimedia Learning and underlying Cognitive Load Theory, and…

  5. Feasibility of Computer Processing of Technical Information on the Design of Instructional Systems. Final Report for the Period 1 July 1972 through 31 March 1973.

    Science.gov (United States)

    Scheffler, F. L.; And Others

    A feasibility study examined the capability of a computer-based system's handling of technical information pertinent to the design of instructional systems. Structured interviews were held to assess the information needs of both researchers and practitioners and an investigation was conducted of 10 computer-based information storage and retrieval…

  6. ASIE Model: An Innovative Instructional Design Model for Teachers in Enhancing and Sustaining the Quality of the 21st Century Learning

    Directory of Open Access Journals (Sweden)

    Ismail Md Zain

    2017-04-01

    Full Text Available An effective and systematic design of instruction will determine the quality of learning and teaching practices. Hence, instructional design models are required, to move from just adopting a standard approach to developing models that have an impact on learners' profiles, creating a much better learning experience, skills, and knowledge both in the classroom and online. The 21st Century Learning Framework requires learners to develop their thinking skills, communication skills, collaborating skills and enhancing their creativity, (4Cs towards establishing "globally competitive learners." An Integral ASIE Instructional Design Model is an innovative 21st Century teachers' designing tool that provides a solution to the above challenges. The Model assist teachers in Planning, Utilizing and Sharing (PLUS instructions with others across nations. It promotes the Professional Learning Community practices where educationist, stakeholders, parents, and corporates work collaboratively ensuring its quality and sustainability in addressing the future employability issues of the learners. Results from 5 Likert Scales Questionnaires given to teachers in workshops and pilot project conducted, shows positive views on the model.

  7. An Expert Instructor's Use of Social Congruence, Cognitive Congruence, and Expertise in an Online Case-Based Instructional Design Course

    Science.gov (United States)

    Watson, Sunnie Lee; Koehler, Adrie A.; Ertmer, Peggy; Kim, WooRi; Rico, Rudy

    2018-01-01

    Promoting and sustaining effective discussion--that which contributes to learning--is a skill that eludes many instructors (Darling-Hammond, 2008; Ge, Yamashiro, & Lee, 2000). This study explored the role and strategies of an expert instructor in an online advanced instructional design (ID) course that utilized a case-based learning (CBL)…

  8. Teaching, Doing, and Sharing Project Management in a Studio Environment: The Development of an Instructional Design Open-Source Project Management Textbook

    Science.gov (United States)

    Randall, Daniel L.; Johnson, Jacquelyn C.; West, Richard E.; Wiley, David A.

    2013-01-01

    In this article, the authors present an example of a project-based course within a studio environment that taught collaborative innovation skills and produced an open-source project management textbook for the field of instructional design and technology. While innovation plays an important role in our economy, and many have studied how to teach…

  9. An Instructional Design Model with the Cultivating Research-Based Learning Strategies for Fostering Teacher Students' Creative Thinking Abilities

    Science.gov (United States)

    Khuana, Khwanchai; Khuana, Tanthip; Santiboon, Toansakul

    2017-01-01

    Designing the instructional model with the innovative the "Research-Based Learning Strategy Lesson Plans" of the effectiveness of the processing performance and the resulting performance (E1/E2) with the IOC value determining standardized criteria of 80/80 were developed. Students' perceptions were assessed with the 30-item…

  10. DESIGN AND DEVELOPMENT OF AN INTELLIGENT INSTRUCTIVE SYSTEM: Scholastic Tutor (St*

    Directory of Open Access Journals (Sweden)

    Adebiyi MARION O.

    2011-10-01

    Full Text Available Intelligent Tutoring Systems (ITS is an act of impacting knowledge while computer teaches or acts as the tutors which is a supplement to human teachers. The ability to teach each student based on their individual abilities a major advantage posed by ITS and that is why it is being embraced in this work. This work describes the design of an Intelligent Tutoring System that was tagged Scholastic tutor (St*, which has the individual learning and collaborative problem-solving modules. The individual tutoring module was designed to provide appropriate lessons to individuals based on his/her background knowledge level, interest, and learning style and assimilation rate prior to using the tutoring system. A software agent is used to monitor and process these parameters, arrange the learning topic, and exercises, for each individual. The collaborative problem-based tutoring module was designed to present tutorial problems and provides facilities to assist learners with some useful information and advice for problem solving. This is because the present lecturing methodology which is the conventional teaching methodology provides an interactive classroom setting that promotes the open exchange of ideas and allows for the lecturer to communicate directly with the students but has a great disadvantage of not teaching all the students according to their own learning rate and pace. The intelligent tutor solves this problem by providing individualised learning for each student where they can learn according to their own pace and learning abilities it will provide remedy and advice when learners encounter difficulties during learning session. The classical model of ITS architecture has four main modules; domain model, student model, tutoring model and the user interface model.

  11. Comprehension with Instructional Media for Middle School Science: Holistic Performative Design Strategy and Cognitive Load

    Science.gov (United States)

    Peterson, Matthew Owen

    This study identifies three distinct levels of text-image integration in page design in a linear relationship of lesser to greater integration: prose primary, prose subsumed, and fully integrated strategies. Science textbook pages were redesigned according to these holistic design strategies for 158 7th-grade students. There were three separate treatment tests, as well as a pre-test and post-test, and pilot tests with both undergraduate students and the subjects themselves. Subjects found the fully integrated strategy to produce the most visually interesting designs and the prose primary strategy to produce the least interesting, with prose subsumed definitively in between (according to 95% confidence intervals). The strategy employed significantly altered interest in science subject matter in one of three treatments (ANOVA, P=0.0446), where a Student's t-test revealed that the prose subsumed strategy produced higher interest in subject matter than prose primary. The strategy employed significantly altered comprehension of abstract relationships in one of three treatments (ANOVA, P=0.0202), where a Student's t-test revealed that the fully integrated strategy resulted in greater comprehension than prose primary. For the same treatment condition significant differences were found through ANOVA for factual-level knowledge (P=0.0289) but not conceptual-level knowledge ( P=0.0586). For factual-level knowledge prose primary resulted in lesser comprehension than both prose subsumed and fully integrated. Comprehension is defined according to cognitive load theory. No strategy impact on perception of task difficulty was found. This study was approved by North Carolina State University's Institutional Review Board and Wake County Public School System's Research Review Committee.

  12. Application analysis tools for ASIP design: application profiling and instruction-set customization

    National Research Council Canada - National Science Library

    Karuri, Kingshuk; Leupers, Ranier

    2011-01-01

    ... of the operating system they are targeting and execute them on the main application processor in the SmartPhone. However these are not the only applications that need to run on the SmartPhone. There are many underlying applications, or lets better call them algorithms, that have very demanding performance and power consumption targets, yet need to be flexible. Here is where the custom processor comes into play for the implementation of algorithms that will have certain variability but are covering a narrow enough design sp...

  13. Comparisons between students' learning achievements of their conventional instruction and the science, technology and social conceptual instructional design on digestion system issue of secondary students at the 10th grade level

    Science.gov (United States)

    Wichalek, Supattra; Chayaburakul, Kanokporn; Santiboon, Toansakul

    2018-01-01

    The purposes of this action research study were 1) to develop learning activities according to the instructional designing model of science, technology, and social (STS) on Digestion Issue, 2) to compare students' learning achievements between their learning activities with the conventional instructional (CIM) and conceptual instructional designing methods of science, technology, and social (STS) on digestion system of secondary students at the 10th grade level with a sample size of 35 experimental student group of their STS learning method, and 91 controlling group in two classes in the first semester in academic year 2016. Using the 4-Instructional Innovative Lesson Plans, the Students' Learning Behaviour Observing Form, the Questionnaire on Teacher Behaviour Interaction (QTBI), the Researcher's Recording Form, the Learning Activity Form, and the Parallel Learning Achievement Test (LAT) were assessed. The results of this research have found that; the Index of Item Objective Congruence (IOC) value ranged from 0.67 to 1.00; the difficulty values were 0.47 and 0.79 for the CIM and STS methods, respectively, the discriminative validity for the LAT was ranged from 0.20 to 0.75. The reliability of the QTBI was 0.79. Students' responses of their learning achievements with the average means scores indicted of the normalized gain values of 0.79 for the STS group, and 0.50 and 0.36 for the CIM groups, respectively. Students' learning achievements of their post-test indicated that of a higher than pre-test, the pre-test and post-test assessments were also differentiated evidence at the 0.05 levels for the STS and CIM groups, significantly. The 22-students' learning outcomes from the STS group evidences at a high level, only of the 9-students' responses in a moderate level were developed of their learning achievements, responsibility.

  14. Impact of Maple(TM) on the design, instruction and performance in an undergraduate physics mathematical methods course

    Science.gov (United States)

    Runge, Alan Paul

    1997-10-01

    A traditional undergraduate physics course on mathematical methods has been redesigned to incorporate the use of Maplesp{sc {TM}}, a computer algebra program, during all aspects of the course. Topics covered were: complex number theory; series approximations; matrix theory; partial differentiation; vector algebra; and vector calculus. Five undergraduate students were enrolled, from sophomore to senior in academic class standing. A qualitative case study methodology was used to describe the changes in the course design resulting from the incorporation of Maplesp{sc {TM}} and their impact on the instruction of the course, and to determine the effects on the students' learning and development of problem solving skills in physics using Maplesp{sc {TM}} as a problem solving tool. The impact of using Maplesp{sc {TM}} on the number and types of interactions is presented. The entire semester long course was included in this study. Each class session is described in detail. Examples of the Maplesp{sc {TM}} materials used are given. The use of the Maplesp{sc {TM}} program was allowed on all homework and exams with each student having their own computer during class. Constraints were made so that the assessment emphasis remained on the mathematics and the conceptual understanding of the problem solving methods. All of the students demonstrated some level of proficiency in using Maplesp{TM} to solve the assigned problems. Strategies for effectively using Maplesp{TM} were presented and were individualized by the students. The students reported positive and negative impacts of using Maplesp{sc {TM}}. All of the students satisfactorily completed the course requirements, receiving final course grades from B to A+. All of them continued to voluntarily use Maplesp{sc {TM}} during the following semester. Instructional methods used included various lecture techniques without Maplesp{sc {TM}} assistance, lectures and demonstrations using only Maplesp{sc {TM}}, and student tasks

  15. Learning strategy preferences, verbal-visual cognitive styles, and multimedia preferences for continuing engineering education instructional design

    Science.gov (United States)

    Baukal, Charles Edward, Jr.

    A literature search revealed very little information on how to teach working engineers, which became the motivation for this research. Effective training is important for many reasons such as preventing accidents, maximizing fuel efficiency, minimizing pollution emissions, and reducing equipment downtime. The conceptual framework for this study included the development of a new instructional design framework called the Multimedia Cone of Abstraction (MCoA). This was developed by combining Dale's Cone of Experience and Mayer's Cognitive Theory of Multimedia Learning. An anonymous survey of 118 engineers from a single Midwestern manufacturer was conducted to determine their demographics, learning strategy preferences, verbal-visual cognitive styles, and multimedia preferences. The learning strategy preference profile and verbal-visual cognitive styles of the sample were statistically significantly different than the general population. The working engineers included more Problem Solvers and were much more visually-oriented than the general population. To study multimedia preferences, five of the seven levels in the MCoA were used. Eight types of multimedia were compared in four categories (types in parantheses): text (text and narration), static graphics (drawing and photograph), non-interactive dynamic graphics (animation and video), and interactive dynamic graphics (simulated virtual reality and real virtual reality). The first phase of the study examined multimedia preferences within a category. Participants compared multimedia types in pairs on dual screens using relative preference, rating, and ranking. Surprisingly, the more abstract multimedia (text, drawing, animation, and simulated virtual reality) were preferred in every category to the more concrete multimedia (narration, photograph, video, and real virtual reality), despite the fact that most participants had relatively little prior subject knowledge. However, the more abstract graphics were only slightly

  16. Pilot-Scale Laboratory Instruction for Chemical Engineering: The Specific Case of the Pilot-Unit Leading Group

    Science.gov (United States)

    Billet, Anne-Marie; Camy, Severine; Coufort-Saudejaud, Carole

    2010-01-01

    This paper presents an original approach for Chemical Engineering laboratory teaching that is currently applied at INP-ENSIACET (France). This approach, referred to as "pilot-unit leading group" is based on a partial management of the laboratories by the students themselves who become temporarily in charge of one specific laboratory. In…

  17. Text, pictures or animations in instructions for use : a validation of different media for specific types of information

    NARCIS (Netherlands)

    Westendorp, P.H.; Ensink, T.; Sauer, C.

    1996-01-01

    The Bieger and Glock taxonomy of information types is applied to test the relative effectiveness of text, pictures and animation in on-line help systems. On the basis of this taxonomy seven versions of an on-line help system for telephones were designed, varying text, picture and animation for the

  18. Effects of preparatory and action planning instructions on situation-specific and general fruit and snack intake

    NARCIS (Netherlands)

    de Bruijn, G.-J.; Nguyen, M.H.; Rhodes, R.E.; van Osch, L.

    Evidence to date suggests heterogeneity in the effects of implementation intentions on health behaviour, including diet. Additional variables and study designs may impact on their effectiveness. Preparatory action, such as making sure fruits are available for consumption, may be an important

  19. 77 FR 45282 - NRC Position on the Relationship Between General Design Criteria and Technical Specification...

    Science.gov (United States)

    2012-07-31

    ... Position on the Relationship Between General Design Criteria and Technical Specification Operability AGENCY... relationship between the general design criteria (GDC) for nuclear power plants and technical specification... Communications Branch, Division of Policy and Rulemaking, Office Nuclear Reactor Regulation, Mail Stop: OWFN-12-D...

  20. From customer needs to partners network specifications: (Design-Manufacturing-Supply) needs matrix

    OpenAIRE

    Zouggar , Salah; Zolghadri , Marc; Girard , P.

    2008-01-01

    New Product Design (NPD) projects consider sequentially various phases of new product design project: customer needs clarification, product specifications, design process, partners selection. Such sequencing ignores possible impacts of partners on the way that the product will be designed and realised. This paper explores early consideration of the partners network for building up relevant partnerships in NPD projects. We attempt to highlight the gain of visibility through suggested Design, M...

  1. Adapt Design: A Methodology for Enabling Modular Design for Mission Specific SUAS

    Science.gov (United States)

    2016-08-24

    GoPro GoPro ® TABLE 3. PAYLOAD FERRY MISSION REQUIREMENTS AND RESULTING DESIGN VALUES Requirement Target Value Returned Design Returned 3-D...frame taken from the GoPro ® camera feed. Figure 19 shows a fixed wing SUAS built for a similar reconnaissance mission. The results in Table 4 show

  2. Preliminary design of the Carrisa Plains solar central receiver power plant. Volume II. Plant specifications

    Energy Technology Data Exchange (ETDEWEB)

    Price, R. E.

    1983-12-31

    The specifications and design criteria for all plant systems and subsystems used in developing the preliminary design of Carrisa Plains 30-MWe Solar Plant are contained in this volume. The specifications have been organized according to plant systems and levels. The levels are arranged in tiers. Starting at the top tier and proceeding down, the specification levels are the plant, system, subsystem, components, and fabrication. A tab number, listed in the index, has been assigned each document to facilitate document location.

  3. Design specifications for ASME B and PV Code Section III nuclear class 1 piping

    International Nuclear Information System (INIS)

    Richardson, J.A.

    1978-01-01

    ASME B and PV Code Section III code regulations for nuclear piping requires that a comprehensive Design Specification be developed for ensuring that the design and installation of the piping meets all code requirements. The intent of this paper is to describe the code requirements, discuss the implementation of these requirements in a typical Class 1 piping design specification, and to report on recent piping failures in operating light water nuclear power plants in the US. (author)

  4. Motivational elements in user instructions

    NARCIS (Netherlands)

    Loorbach, N.R.

    2013-01-01

    Concerning the design of user instructions, two view can be distinguished. The traditional view considers instructions as purely instrumental documents. The more and more emerging affective view still assumes that above all, instructions should enable readers to perform tasks. But in order to

  5. Application of Evolution Strategies to the Design of Tracking Filters with a Large Number of Specifications

    Directory of Open Access Journals (Sweden)

    Jesús García Herrero

    2003-07-01

    Full Text Available This paper describes the application of evolution strategies to the design of interacting multiple model (IMM tracking filters in order to fulfill a large table of performance specifications. These specifications define the desired filter performance in a thorough set of selected test scenarios, for different figures of merit and input conditions, imposing hundreds of performance goals. The design problem is stated as a numeric search in the filter parameters space to attain all specifications or at least minimize, in a compromise, the excess over some specifications as much as possible, applying global optimization techniques coming from evolutionary computation field. Besides, a new methodology is proposed to integrate specifications in a fitness function able to effectively guide the search to suitable solutions. The method has been applied to the design of an IMM tracker for a real-world civil air traffic control application: the accomplishment of specifications defined for the future European ARTAS system.

  6. Design of the real time systems using temporal logic specifications: a case study

    Directory of Open Access Journals (Sweden)

    A. Ursu

    1996-07-01

    Full Text Available An implementation method for real time systems is proposed in this article. The implementation starts with the design of the functional specifications of the systems behaviour. The functional specifications are introduced as a set of rules describing the partial time ordering of the actions performed by the system. These rules are then written in terms of temporal logic formulae. The temporal logic formulae are checked using Z.Manna-P.Wolper satisfiability analysis procedure [1]. It is known that this procedure generates a state-graph which can be regarded as a state- based automaton of the system. The sate-based automaton is used then to generate the dual (inverted automaton of the system. The dual automaton is called action-based automaton and can be created using the procedure proposed by authors in [4,5]. Using the action-based automaton of the system the design method introduced in [5,6] is applied to implement the system driver in a systematic manner which can be computerised. The method proposed in this paper is an efficient complementation and generalisation of the results [4,5,6] mentioned above. The method is used for a case study. An elevator control system is designed using the proposed method. The design is carried out in a systematic manner which includes: a design of functional specifications, b design of temporal logic specifications, c satisfiability analysis of temporal logic specifications, d design of the state-based automaton of the specifications, e design of the action-based automaton of the system, f design of the transition activation conditions, g design of the action activation conditions, h design of the functional model of the elevator control system, i implementation of the elevator's actions, j design of the elevator control system driver.

  7. HAL/SM system functional design specification. [systems analysis and design analysis of central processing units

    Science.gov (United States)

    Ross, C.; Williams, G. P. W., Jr.

    1975-01-01

    The functional design of a preprocessor, and subsystems is described. A structure chart and a data flow diagram are included for each subsystem. Also a group of intermodule interface definitions (one definition per module) is included immediately following the structure chart and data flow for a particular subsystem. Each of these intermodule interface definitions consists of the identification of the module, the function the module is to perform, the identification and definition of parameter interfaces to the module, and any design notes associated with the module. Also described are compilers and computer libraries.

  8. Safety of Nuclear Power Plants: Design. Specific Safety Requirements (Chinese Ed.)

    International Nuclear Information System (INIS)

    2012-01-01

    On the basis of the principles included in the Fundamental Safety Principles, IAEA Safety Standards Series No. SF-1, this Safety Requirements publication establishes requirements applicable to the design of nuclear power plants. It covers the design phase and provides input for the safe operation of the power plant. It elaborates on the safety objective, safety principles and concepts that provide the basis for deriving the safety requirements that must be met for the design of a nuclear power plant. Contents: 1. Introduction; 2. Applying the safety principles and concepts; 3. Management of safety in design; 4. Principal technical requirements; 5. General plant design; 6. Design of specific plant systems.

  9. Safety of Nuclear Power Plants: Design. Specific Safety Requirements (French Ed.)

    International Nuclear Information System (INIS)

    2012-01-01

    On the basis of the principles included in the Fundamental Safety Principles, IAEA Safety Standards Series No. SF-1, this Safety Requirements publication establishes requirements applicable to the design of nuclear power plants. It covers the design phase and provides input for the safe operation of the power plant. It elaborates on the safety objective, safety principles and concepts that provide the basis for deriving the safety requirements that must be met for the design of a nuclear power plant. Contents: 1. Introduction; 2. Applying the safety principles and concepts; 3. Management of safety in design; 4. Principal technical requirements; 5. General plant design; 6. Design of specific plant systems.

  10. Safety of Nuclear Power Plants: Design. Specific Safety Requirements (Arabic Ed.)

    International Nuclear Information System (INIS)

    2012-01-01

    On the basis of the principles included in the Fundamental Safety Principles, IAEA Safety Standards Series No. SF-1, this Safety Requirements publication establishes requirements applicable to the design of nuclear power plants. It covers the design phase and provides input for the safe operation of the power plant. It elaborates on the safety objective, safety principles and concepts that provide the basis for deriving the safety requirements that must be met for the design of a nuclear power plant. Contents: 1. Introduction; 2. Applying the safety principles and concepts; 3. Management of safety in design; 4. Principal technical requirements; 5. General plant design; 6. Design of specific plant systems.

  11. Enabling People with Developmental Disabilities to Actively Follow Simple Instructions and Perform Designated Physical Activities According to Simple Instructions with Nintendo Wii Balance Boards by Controlling Environmental Stimulation

    Science.gov (United States)

    Shih, Ching-Hsiang; Chung, Chiao-Chen; Shih, Ching-Tien; Chen, Ling-Che

    2011-01-01

    The latest researches have adopted software technology turning the Nintendo Wii Balance Board into a high performance standing location detector. This study extended Wii Balance Board functionality to assess whether two people with developmental disabilities would be able to actively perform designated physical activities according to simple…

  12. 18th edition of the Forum on specification and Design Languages Conference

    CERN Document Server

    Wille, Robert

    2016-01-01

    This book brings together a selection of the best papers from the eighteenth edition of the Forum on specification and Design Languages Conference (FDL), which took place on September 14-16, 2015, in Barcelona, Spain. FDL is a well-established international forum devoted to dissemination of research results, practical experiences and new ideas in the application of specification, design and verification languages to the design, modeling and verification of integrated circuits, complex hardware/software embedded systems, and mixed-technology systems. Covers Assertion Based Design, Verification & Debug; Includes language-based modeling and design techniques for embedded systems; Covers design, modeling and verification of mixed physical domain and mixed signal systems that include significant analog parts in electrical and non-electrical domains; Includes formal and semi-formal system level design methods for complex embedded systems based on the Unified Modelling Language (UML) and Model Driven Engineering...

  13. 17th edition of the Forum on specification and Design Languages Conference

    CERN Document Server

    Pasaje, Julio

    2016-01-01

    This book brings together a selection of the best papers from the seventeenth edition of the Forum on specification and Design Languages Conference (FDL), which took place on October 14-16, 2014, in Munich, Germany.  FDL is a well-established international forum devoted to dissemination of research results, practical experiences and new ideas in the application of specification, design and verification languages to the design, modeling and verification of integrated circuits, complex hardware/software embedded systems, and mixed-technology systems.   •Covers Assertion Based Design, Verification & Debug; •Includes language-based modeling and design techniques for embedded systems; •Covers design, modeling and verification of mixed physical domain and mixed signal systems; •Includes formal and semi-formal system level design methods for complex embedded systems based on the Unified Modelling Language (UML) and Model Driven Engineering (MDE); •Covers parallel architectures – both as platforms f...

  14. Engaging Gatekeepers, Optimizing Decision Making, and Mitigating Bias: Design Specifications for Systemic Diversity Interventions.

    Science.gov (United States)

    Vinkenburg, Claartje J

    2017-06-01

    In this contribution to the Journal of Applied Behavioral Science Special Issue on Understanding Diversity Dynamics in Systems: Social Equality as an Organization Change Issue, I develop and describe design specifications for systemic diversity interventions in upward mobility career systems, aimed at optimizing decision making through mitigating bias by engaging gatekeepers. These interventions address the paradox of meritocracy that underlies the surprising lack of diversity at the top of the career pyramid in these systems. I ground the design specifications in the limited empirical evidence on "what works" in systemic interventions. Specifically, I describe examples from interventions in academic settings, including a bias literacy program, participatory modeling, and participant observation. The design specifications, paired with inspirational examples of successful interventions, should assist diversity officers and consultants in designing and implementing interventions to promote the advancement to and representation of nondominant group members at the top of the organizational hierarchy.

  15. System design specification Brayton Isotope Power System (BIPS) Flight System (FS), and Ground Demonstration System (GDS)

    International Nuclear Information System (INIS)

    1976-01-01

    The system design specification for ground demonstration, development, and flight qualification of a Brayton Isotope Power System (BIPS) is presented. The requirements for both a BIPS conceptual Flight System (FS) and a Ground Demonstration System (GDS) are defined

  16. Specification of Behavioural Requirements within Compositional Multi-Agent System Design

    OpenAIRE

    Herlea, D.E.; Jonker, C.M.; Treur, J.; Wijngaards, N.J.E.

    1999-01-01

    In this paper it is shown how informal and formal specification of behavioural requirements and scenarios for agents and multi-agent systems can be integrated within multi-agent system design. In particular, it is addressed how a compositional

  17. Practical Findings from Applying the PSD Model for Evaluating Software Design Specifications

    Science.gov (United States)

    Räisänen, Teppo; Lehto, Tuomas; Oinas-Kukkonen, Harri

    This paper presents practical findings from applying the PSD model to evaluating the support for persuasive features in software design specifications for a mobile Internet device. On the one hand, our experiences suggest that the PSD model fits relatively well for evaluating design specifications. On the other hand, the model would benefit from more specific heuristics for evaluating each technique to avoid unnecessary subjectivity. Better distinction between the design principles in the social support category would also make the model easier to use. Practitioners who have no theoretical background can apply the PSD model to increase the persuasiveness of the systems they design. The greatest benefit of the PSD model for researchers designing new systems may be achieved when it is applied together with a sound theory, such as the Elaboration Likelihood Model. Using the ELM together with the PSD model, one may increase the chances for attitude change.

  18. A simplified approach to control system specification and design using domain modelling and mapping

    International Nuclear Information System (INIS)

    Ludgate, G.A.

    1992-01-01

    Recent developments in the field of accelerator-domain and computer-domain modelling have led to a better understanding of the 'art' of control system specification and design. It now appears possible to 'compile' a control system specification to produce the architectural design. The information required by the 'compiler' is discussed and one hardware optimization algorithm presented. The desired characteristics of the hardware and software components of a distributed control system architecture are discussed and the shortcomings of some commercial products. (author)

  19. Anaerobic Digestion. Selected Instructional Activities and References. Instructional Resources Monograph Series.

    Science.gov (United States)

    Townsend, Robert D., Comp.

    Focusing specifically on the wastewater treatment process of anaerobic digestion, this document identifies instructional and reference materials for use by professionals in the field in the development and implementation of new programs or in the updating of existing programs. It is designed to help trainers, plant operators, educators, engineers,…

  20. Diseño instruccional: oficio, fase y proceso Desenho instruccional: ofício, fase e processo Instructional Design: Role, Phase and Process

    Directory of Open Access Journals (Sweden)

    Andrés Chiappe. Laverde

    2008-12-01

    ício.The article offers a conceptual look at instructional design as a term now being used frequently in processes to generate educational material and virtual learning environments. It begins with a review of the history and evolution of instructional design and ends with a theoretical proposal. The objective of the article is to construct a critical proposal in response to the current debate over instructional design. The proposal places special emphasis on differences compared to the models that have served historically as the principal reference on this subject. To accomplish this, the term instruction is examined in depth, so as to arrive at a comprehensive approach to the globality of instructional design. The importance of identifying both the profile and the particular role of an instructional designer is emphasized as a way to establish a frame of reference for defining the practice of instructional design, the relationships constructed by institutional designers, and the interdisciplinary knowledge particular to their role.

  1. Optimal Multitrial Prediction Combination and Subject-Specific Adaptation for Minimal Training Brain Switch Designs

    NARCIS (Netherlands)

    Spyrou, L.; Blokland, Y.M.; Farquhar, J.D.R.; Bruhn, J.

    2016-01-01

    Brain-Computer Interface (BCI) systems are traditionally designed by taking into account user-specific data to enable practical use. More recently, subject independent (SI) classification algorithms have been developed which bypass the subject specific adaptation and enable rapid use of the system.

  2. Optimal multitrial prediction combination and subject-specific adaptation for minimal training brain switch designs

    NARCIS (Netherlands)

    Spyrou, L.; Blokland, Y.M.; Farquhar, J.D.R.; Bruhn, J.

    2016-01-01

    Brain-Computer Interface systems are traditionally designed by taking into account user-specific data to enable practical use. More recently, subject independent (SI) classification algorithms have been developed which bypass the subject specific adaptation and enable rapid use of the system. A

  3. Visual Approach and Design: The Appropriate Characteristics of Instructional Photos as a Tool to Support Elementary Setting in Kuwait

    Science.gov (United States)

    Buhamad, Ali

    2016-01-01

    This study provided a guide for appropriate characteristics of Instructional Photo to be used by teachers, trainers, coaches, instructors, and anyone else who desires to deliver knowledge and present content with visual meaning to elementary students in the state of Kuwait as a teaching style that supports teachers, facilitates clarification, and…

  4. Instructional Design for Advanced Learners: Establishing Connections between the Theoretical Frameworks of Cognitive Load and Deliberate Practice

    NARCIS (Netherlands)

    Van Gog, Tamara; Ericsson, K. A.; Rikers, Remy; Paas, Fred

    2007-01-01

    Cognitive load theory (CLT) has been successful in identifying instructional formats that are more effective and efficient than conventional problem solving in the initial, novice phase of skill acquisition. However, recent findings regarding the “expertise reversal effect” have begun to stimulate

  5. General Education Issues, Distance Education Practices: Building Community and Classroom Interaction through the Integration of Curriculum, Instructional Design, and Technology.

    Science.gov (United States)

    Childers, Jeri L.; Berner, R. Thomas

    2000-01-01

    Examines the issues in a case study surrounding the integration of videoconferencing and Web-based instruction to bring the literature of journalism to life for undergraduate students. Sets forth examples of principles and practices for successful integration of distance education and general education. Also describes the students' reactions in…

  6. A Design of Computer Aided Instructions (CAI) for Undirected Graphs in the Discrete Math Tutorial (DMT). Part 1.

    Science.gov (United States)

    1990-06-01

    The objective of this thesis research is to create a tutorial for teaching aspects of undirected graphs in discrete math . It is one of the submodules...of the Discrete Math Tutorial (DMT), which is a Computer Aided Instructional (CAI) tool for teaching discrete math to the Naval Academy and the

  7. A Design of Computer Aided Instructions (CAI) for Undirected Graphs in the Discrete Math Tutorial (DMT). Part 2

    Science.gov (United States)

    1990-06-01

    The objective of this thesis research is to create a tutorial for teaching aspects of undirected graphs in discrete math . It is one of the submodules...of the Discrete Math Tutorial (DMT), which is a Computer Aided Instructional (CAI) tool for teaching discrete math to the Naval Academy and the

  8. Potentials for site-specific design of MW sized wind turbines

    DEFF Research Database (Denmark)

    Thomsen, K.; Fuglsang, P.; Schepers, G.

    2001-01-01

    The potential for site specific design of MW sized wind turbines is quantified by comparing design loads for wind turbines installed at a range of different sites. The sites comprise on-shore normal flat terrain stand-alone conditions and wind farm conditions together with offshore and mountainous...

  9. Better Educational Website Interface Design: The Implications from Gender-Specific Preferences in Graduate Students

    Science.gov (United States)

    Hsu, Yu-chang

    2006-01-01

    This study investigated graduate students gender-specific preferences for certain website interface design features, intending to generate useful information for instructors in choosing and for website designers in creating educational websites. The features investigated in this study included colour value, major navigation buttons placement, and…

  10. Effects of multimedia vocabulary instruction on adolescents with learning disabilities.

    Science.gov (United States)

    Kennedy, Michael J; Deshler, Donald D; Lloyd, John Wills

    2015-01-01

    The purpose of this experimental study is to investigate the effects of using content acquisition podcasts (CAPs), an example of instructional technology, to provide vocabulary instruction to adolescents with and without learning disabilities (LD). A total of 279 urban high school students, including 30 with LD in an area related to reading, were randomly assigned to one of four experimental conditions with instruction occurring at individual computer terminals over a 3-week period. Each of the four conditions contained different configurations of multimedia-based instruction and evidence-based vocabulary instruction. Dependent measures of vocabulary knowledge indicated that students with LD who received vocabulary instruction using CAPs through an explicit instructional methodology and the keyword mnemonic strategy significantly outperformed other students with LD who were taught using the same content, but with multimedia instruction that did not adhere to a specific theoretical design framework. Results for general education students mirrored those for students with LD. Students also completed a satisfaction measure following instruction with multimedia and expressed overall agreement that CAPs are useful for learning vocabulary terms. © Hammill Institute on Disabilities 2013.

  11. Creating Tic Suppression: Comparing the Effects of Verbal Instruction to Differential Reinforcement

    Science.gov (United States)

    Woods, Douglas W.; Himle, Michael B.

    2004-01-01

    The purpose of this study was to compare two methods designed to produce tic reduction in 4 children with Tourette's syndrome. Specifically, a verbal instruction not to engage in tics was compared to a verbal instruction plus differential reinforcement of zero-rate behavior (DRO). Results showed that the DRO-enhanced procedure yielded greater…

  12. Design of application specific long period waveguide grating filters using adaptive particle swarm optimization algorithms

    International Nuclear Information System (INIS)

    Semwal, Girish; Rastogi, Vipul

    2014-01-01

    We present design optimization of wavelength filters based on long period waveguide gratings (LPWGs) using the adaptive particle swarm optimization (APSO) technique. We demonstrate optimization of the LPWG parameters for single-band, wide-band and dual-band rejection filters for testing the convergence of APSO algorithms. After convergence tests on the algorithms, the optimization technique has been implemented to design more complicated application specific filters such as erbium doped fiber amplifier (EDFA) amplified spontaneous emission (ASE) flattening, erbium doped waveguide amplifier (EDWA) gain flattening and pre-defined broadband rejection filters. The technique is useful for designing and optimizing the parameters of LPWGs to achieve complicated application specific spectra. (paper)

  13. Control system design specification of advanced spent fuel management process units

    Energy Technology Data Exchange (ETDEWEB)

    Ahn, S. H.; Kim, S. H.; Yoon, J. S

    2003-06-01

    In this study, the design specifications of instrumentation and control system for advanced spent fuel management process units are presented. The advanced spent fuel management process consists of several process units such as slitting device, dry pulverizing/mixing device, metallizer, etc. In this study, the control and operation characteristics of the advanced spent fuel management mockup process devices and the process devices developed in 2001 and 2002 are analysed. Also, a integral processing system of the unit process control signals is proposed, which the operation efficiency is improved. And a redundant PLC control system is constructed which the reliability is improved. A control scheme is proposed for the time delayed systems compensating the control performance degradation caused by time delay. The control system design specification is presented for the advanced spent fuel management process units. This design specifications can be effectively used for the detail design of the advanced spent fuel management process.

  14. From ergonomics to design specifications: contributions to the design of a processing machine in a tire company.

    Science.gov (United States)

    Moraes, A S P; Arezes, P M; Vasconcelos, R

    2012-01-01

    The development of ergonomics' recommendations, guidelines and standards are attempts to promote the integration of ergonomics into industrial contexts. Such developments result from several sources and professionals and represent the effort that has been done to develop healthier and safer work environments. However, the availability of large amount of data and documents regarding ergonomics does not guarantee their applicability. The main goal of this paper is to use a specific case to demonstrate how ergonomics criteria were developed in order to contribute to the design of workplaces. Based on the obtained results from research undertaken in a tire company, it was observed that the ergonomics criteria should be presented as design specifications in order to be used by engineers and designers. In conclusion, it is observed that the multiple constraint environment impeded the appliance of the ergonomics criteria. It was also observed that the knowledge on technical design and the acquaintance with ergonomic standards, the level of integration in the design team, and the ability to communicate with workers and other technical staff have paramount importance in integrating ergonomics criteria into the design process.

  15. The development of a patient-specific method for physiotherapy goal setting: a user-centered design.

    Science.gov (United States)

    Stevens, Anita; Köke, Albère; van der Weijden, Trudy; Beurskens, Anna

    2018-08-01

    To deliver client-centered care, physiotherapists need to identify the patients' individual treatment goals. However, practical tools for involving patients in goal setting are lacking. The purpose of this study was to improve the frequently used Patient-Specific Complaints instrument in Dutch physiotherapy, and to develop it into a feasible method to improve physiotherapy goal setting. An iterative user-centered design was conducted in co-creation with the physiotherapists and patients, in three phases. Their needs and preferences were identified by means of group meetings and questionnaires. The new method was tested in several field tests in physiotherapy practices. Four main objectives for improvement were formulated: clear instructions for the administration procedure, targeted use across the physiotherapy process, client-activating communication skills, and a client-centered attitude of the physiotherapist. A theoretical goal-setting framework and elements of shared decision making were integrated into the new-called, Patient-Specific Goal-setting method, together with a practical training course. The user-centered approach resulted in a goal-setting method that is fully integrated in the physiotherapy process. The new goal-setting method contributes to a more structured approach to goal setting and enables patient participation and goal-oriented physiotherapy. Before large-scale implementation, its feasibility in physiotherapy practice needs to be investigated. Implications for rehabilitation Involving patients and physiotherapists in the development and testing of a goal-setting method, increases the likelihood of its feasibility in practice. The integration of a goal-setting method into the physiotherapy process offers the opportunity to focus more fully on the patient's goals. Patients should be informed about the aim of every step of the goal-setting process in order to increase their awareness and involvement. Training physiotherapists to use a patient-specific

  16. Safety of Nuclear Power Plants: Design. Specific Safety Requirements (Spanish Edition)

    International Nuclear Information System (INIS)

    2012-01-01

    This publication is a revision of Safety Requirements No. NS-R-1, Safety of Nuclear Power Plants: Design. It establishes requirements applicable to the design of nuclear power plants and elaborates on the safety objective, safety principles and concepts that provide the basis for deriving the safety requirements that must be met for the design of a nuclear power plant. It will be useful for organizations involved in the design, manufacture, construction, modification, maintenance, operation and decommissioning of nuclear power plants, as well as for regulatory bodies. Contents: 1. Introduction; 2. Applying the safety principles and concepts; 3. Management of safety in design; 4. Principal technical requirements; 5. General plant design; 6. Design of specific plant systems.

  17. Safety of Nuclear Power Plants: Design. Specific Safety Requirements (Russian Edition)

    International Nuclear Information System (INIS)

    2012-01-01

    This publication is a revision of Safety Requirements No. NS-R-1, Safety of Nuclear Power Plants: Design. It establishes requirements applicable to the design of nuclear power plants and elaborates on the safety objective, safety principles and concepts that provide the basis for deriving the safety requirements that must be met for the design of a nuclear power plant. It will be useful for organizations involved in the design, manufacture, construction, modification, maintenance, operation and decommissioning of nuclear power plants, as well as for regulatory bodies. Contents: 1. Introduction; 2. Applying the safety principles and concepts; 3. Management of safety in design; 4. Principal technical requirements; 5. General plant design; 6. Design of specific plant systems.

  18. Designs of precoding for LTE TDD using cell specific reference signals

    DEFF Research Database (Denmark)

    Sun, Fan; Lu, Lu; Sørensen, Troels Bundgaard

    2010-01-01

    We design non-codebook-based Multiple-Input Multiple-Output (MIMO) precoding schemes using multiple cell-specific reference signals patterns for the time division duplex (TDD) mode of LTE, where channel reciprocity can be exploited. Previously proposed non-codebookbased precoding schemes typically...... use UE specific reference signals for demodulation. Cell specific reference signals are however always allocated for the transmission of common control signalling, mobility measurements and downlink channel quality measurements. In order to save the resources occupied by UE specific reference signals...

  19. Specification and Design of Electrical Flight System Architectures with SysML

    Science.gov (United States)

    McKelvin, Mark L., Jr.; Jimenez, Alejandro

    2012-01-01

    Modern space flight systems are required to perform more complex functions than previous generations to support space missions. This demand is driving the trend to deploy more electronics to realize system functionality. The traditional approach for the specification, design, and deployment of electrical system architectures in space flight systems includes the use of informal definitions and descriptions that are often embedded within loosely coupled but highly interdependent design documents. Traditional methods become inefficient to cope with increasing system complexity, evolving requirements, and the ability to meet project budget and time constraints. Thus, there is a need for more rigorous methods to capture the relevant information about the electrical system architecture as the design evolves. In this work, we propose a model-centric approach to support the specification and design of electrical flight system architectures using the System Modeling Language (SysML). In our approach, we develop a domain specific language for specifying electrical system architectures, and we propose a design flow for the specification and design of electrical interfaces. Our approach is applied to a practical flight system.

  20. Custom-Designed Molecular Scissors for Site-Specific Manipulation of the Plant and Mammalian Genomes

    Science.gov (United States)

    Kandavelou, Karthikeyan; Chandrasegaran, Srinivasan

    Zinc finger nucleases (ZFNs) are custom-designed molecular scissors, engineered to cut at specific DNA sequences. ZFNs combine the zinc finger proteins (ZFPs) with the nonspecific cleavage domain of the FokI restriction enzyme. The DNA-binding specificity of ZFNs can be easily altered experimentally. This easy manipulation of the ZFN recognition specificity enables one to deliver a targeted double-strand break (DSB) to a genome. The targeted DSB stimulates local gene targeting by several orders of magnitude at that specific cut site via homologous recombination (HR). Thus, ZFNs have become an important experimental tool to make site-specific and permanent alterations to genomes of not only plants and mammals but also of many other organisms. Engineering of custom ZFNs involves many steps. The first step is to identify a ZFN site at or near the chosen chromosomal target within the genome to which ZFNs will bind and cut. The second step is to design and/or select various ZFP combinations that will bind to the chosen target site with high specificity and affinity. The DNA coding sequence for the designed ZFPs are then assembled by polymerase chain reaction (PCR) using oligonucleotides. The third step is to fuse the ZFP constructs to the FokI cleavage domain. The ZFNs are then expressed as proteins by using the rabbit reticulocyte in vitro transcription/translation system and the protein products assayed for their DNA cleavage specificity.

  1. Design for Additive Bio-Manufacturing: From Patient-Specific Medical Devices to Rationally Designed Meta-Biomaterials.

    Science.gov (United States)

    Zadpoor, Amir A

    2017-07-25

    Recent advances in additive manufacturing (AM) techniques in terms of accuracy, reliability, the range of processable materials, and commercial availability have made them promising candidates for production of functional parts including those used in the biomedical industry. The complexity-for-free feature offered by AM means that very complex designs become feasible to manufacture, while batch-size-indifference enables fabrication of fully patient-specific medical devices. Design for AM (DfAM) approaches aim to fully utilize those features for development of medical devices with substantially enhanced performance and biomaterials with unprecedented combinations of favorable properties that originate from complex geometrical designs at the micro-scale. This paper reviews the most important approaches in DfAM particularly those applicable to additive bio-manufacturing including image-based design pipelines, parametric and non-parametric designs, metamaterials, rational and computationally enabled design, topology optimization, and bio-inspired design. Areas with limited research have been identified and suggestions have been made for future research. The paper concludes with a brief discussion on the practical aspects of DfAM and the potential of combining AM with subtractive and formative manufacturing processes in so-called hybrid manufacturing processes.

  2. Design for Additive Bio-Manufacturing: From Patient-Specific Medical Devices to Rationally Designed Meta-Biomaterials

    Directory of Open Access Journals (Sweden)

    Amir A. Zadpoor

    2017-07-01

    Full Text Available Recent advances in additive manufacturing (AM techniques in terms of accuracy, reliability, the range of processable materials, and commercial availability have made them promising candidates for production of functional parts including those used in the biomedical industry. The complexity-for-free feature offered by AM means that very complex designs become feasible to manufacture, while batch-size-indifference enables fabrication of fully patient-specific medical devices. Design for AM (DfAM approaches aim to fully utilize those features for development of medical devices with substantially enhanced performance and biomaterials with unprecedented combinations of favorable properties that originate from complex geometrical designs at the micro-scale. This paper reviews the most important approaches in DfAM particularly those applicable to additive bio-manufacturing including image-based design pipelines, parametric and non-parametric designs, metamaterials, rational and computationally enabled design, topology optimization, and bio-inspired design. Areas with limited research have been identified and suggestions have been made for future research. The paper concludes with a brief discussion on the practical aspects of DfAM and the potential of combining AM with subtractive and formative manufacturing processes in so-called hybrid manufacturing processes.

  3. A Strategy for Material-specific e-Textile Interaction Design

    DEFF Research Database (Denmark)

    Gowrishankar, Ramyah; Bredies, Katharina; Ylirisku, Salu

    2017-01-01

    The interaction design of e-Textile products are often characterized by conventions adopted from electronic devices rather than developing interactions that can be specific to e-Textiles. We argue that textile materials feature a vast potential for the design of novel digital interactions....... Especially the shape-reformation capabilities of textiles may inform the design of expressive and aesthetically rewarding applications. In this chapter, we propose ways in which the textileness of e-Textiles can be better harnessed. We outline an e-Textile Interaction Design strategy that is based...... on defining the material-specificity of e-Textiles as its ability to deform in ways that match the expectations we have of textile materials. It embraces an open-ended exploration of textile-related interactions (for e.g. stretching, folding, turning-inside-out etc.) and their potential for electronic...

  4. Graded territories: Towards the design, specification and simulation of materially graded bending active structures

    DEFF Research Database (Denmark)

    Nicholas, Paul; Tamke, Martin; Ramsgaard Thomsen, Mette

    2012-01-01

    these structures, the property of bending is activated and varied through bespoke material means so as to match a desired form. Within the architectural design process, formal control depends upon design approaches for material specification and simulation that consider behavior at the level of the material...... element as well as the structure. We describe an evolving approach to material specification and simulation, and highlight the digital and material considerations that frame the process.......The ability to make materials with bespoke behavior affords new perspectives on incorporating material properties within the design process not available through natural materials. This paper reports the design and assembly of two bending-active, fibre-reinforced composite structures. Within...

  5. Interim performance specifications for conceptual waste-package designs for geologic isolation in salt repositories

    International Nuclear Information System (INIS)

    1983-06-01

    The interim performance specifications and data requirements presented apply to conceptual waste package designs for all waste forms which will be isolated in salt geologic repositories. The waste package performance specifications and data requirements respond to the waste package performance criteria. Subject areas treated include: containment and controlled release, operational period safety, criticality control, identification, and waste package performance testing requirements. This document was generated for use in the development of conceptual waste package designs in salt. It will be revised as additional data, analyses, and regulatory requirements become available

  6. Mod-5A wind turbine generator program design report. Volume 4: Drawings and specifications, book 3

    Science.gov (United States)

    1984-01-01

    The design, development and analysis of the 7.3 MW MOD-5A wind turbine generator is documented. This volume contains the drawings and specifications developed for the final design. This volume is divided into 5 books of which this is the third, containing drawings 47A380074 through 47A380126. A full breakdown parts listing is provided as well as a where used list.

  7. Processing Instruction: A review of issues

    Directory of Open Access Journals (Sweden)

    Muhlisin Rasuki

    2017-07-01

    Full Text Available This paper provides a critical review of Processing Instruction (PI. This type of instructional option was specifically designed to help second/foreign language (L2 learners grasp meaning manifested in the use of particular grammatical forms in a target language effectively through the provision of input. In this way, PI attempts to help learners develop grammatical competence in a target language in ways that foster their comprehension and production skills. The paper starts with outlining main characteristics of PI which distinguish it from other types of L2 grammar instruction. Then, a large body of research attempting to investigate the relative efficacy of PI is scrutinized. The paper concludes with a number of important issues that future studies on PI need to address.

  8. Spaceborne computer executive routine functional design specification. Volume 2: Computer executive design for space station/base

    Science.gov (United States)

    Kennedy, J. R.; Fitzpatrick, W. S.

    1971-01-01

    The computer executive functional system design concepts derived from study of the Space Station/Base are presented. Information Management System hardware configuration as directly influencing the executive design is reviewed. The hardware configuration and generic executive design requirements are considered in detail in a previous report (System Configuration and Executive Requirements Specifications for Reusable Shuttle and Space Station/Base, 9/25/70). This report defines basic system primitives and delineates processes and process control. Supervisor states are considered for describing basic multiprogramming and multiprocessing systems. A high-level computer executive including control of scheduling, allocation of resources, system interactions, and real-time supervisory functions is defined. The description is oriented to provide a baseline for a functional simulation of the computer executive system.

  9. A Comprehensive Evaluation Rubric for Assessing Instructional Apps

    Directory of Open Access Journals (Sweden)

    Cheng-Yuan Lee

    2015-01-01

    Full Text Available There is a pressing need for an evaluation rubric that examines all aspects of educational apps designed for instructional purposes. In past decades, many rubrics have been developed for evaluating educational computer-based programs; however, rubrics designed for evaluating the instructional implications of educational apps are scarce. When an Internet search for existing rubrics was conducted, only two such rubrics were found, and the evaluation criteria used in those rubrics was not clearly linked to previously conducted research nor were their evaluative dimensions clearly defined. These shortcomings result in reviewers being unable to use those rubrics to provide teachers with a precise analysis of an educational app’s instructional potential. In response, this paper presents a comprehensive rubric with 24-evaluative dimensions tailored specifically to analyze the educational potential of instructional apps.

  10. Design and Verification of Application Specific Integrated Circuits in a Network of Online Labs

    Directory of Open Access Journals (Sweden)

    A.Y. Al-Zoubi

    2009-08-01

    Full Text Available A solution to implement a remote laboratory for testing and designing analog Application-Specific Integrated Circuits of the type (ispPAC10 is presented. The application allows electrical engineering students to access and perform measurements and conduct analog electronics experiments over the internet. PAC-Designer software, running on a Citrix server, is used in the circuit design in which the signals are generated and the responses are acquired by a data acquisition board controlled by LabVIEW. Three interconnected remote labs located in three different continents will be implementing the proposed system.

  11. Mod-5A Wind Turbine Generator Program Design Report. Volume 4: Drawings and Specifications, Book 1

    Science.gov (United States)

    1984-01-01

    The design, development and analysis of the 7.3 MW MOD-5A wind turbine generator is documented. Volume 4 contains the drawings and specifications that were developed in preparation for building the MOD-5A wind turbine generator. This is the first of five books of volume four. It contains structural design criteria, generator step-up transformer specs, specs for design, fabrication and testing of the system, specs for the ground control enclosure, systems specs, slip ring specs, and control system specs.

  12. Just-in-time Design and Additive Manufacture of Patient-specific Medical Implants

    Science.gov (United States)

    Shidid, Darpan; Leary, Martin; Choong, Peter; Brandt, Milan

    Recent advances in medical imaging and manufacturing science have enabled the design and production of complex, patient-specific orthopaedic implants. Additive Manufacture (AM) generates three-dimensional structures layer by layer, and is not subject to the constraints associated with traditional manufacturing methods. AM provides significant opportunities for the design of novel geometries and complex lattice structures with enhanced functional performance. However, the design and manufacture of patient-specific AM implant structures requires unique expertise in handling various optimization platforms. Furthermore, the design process for complex structures is computationally intensive. The primary aim of this research is to enable the just-in-time customisation of AM prosthesis; whereby AM implant design and manufacture be completed within the time constraints of a single surgical procedure, while minimising prosthesis mass and optimising the lattice structure to match the stiffness of the surrounding bone tissue. In this research, a design approach using raw CT scan data is applied to the AM manufacture of femoral prosthesis. Using the proposed just-in-time concept, the mass of the prosthesis was rapidly designed and manufactured while satisfying the associated structural requirements. Compressive testing of lattice structures manufactured using proposed method shows that the load carrying capacity of the resected composite bone can be recovered by up to 85% and the compressive stiffness of the AM prosthesis is statistically indistinguishable from the stiffness of the initial bone.

  13. Cofactor specificity switch in Shikimate dehydrogenase by rational design and consensus engineering.

    Science.gov (United States)

    García-Guevara, Fernando; Bravo, Iris; Martínez-Anaya, Claudia; Segovia, Lorenzo

    2017-08-01

    Consensus engineering has been used to design more stable variants using the most frequent amino acid at each site of a multiple sequence alignment; sometimes consensus engineering modifies function, but efforts have mainly been focused on studying stability. Here we constructed a consensus Rossmann domain for the Shikimate dehydrogenase enzyme; separately we decided to switch the cofactor specificity through rational design in the Escherichia coli Shikimate dehydrogenase enzyme and then analyzed the effect of consensus mutations on top of our design. We found that consensus mutations closest to the 2' adenine moiety increased the activity in our design. Consensus engineering has been shown to result in more stable proteins and our findings suggest it could also be used as a complementary tool for increasing or modifying enzyme activity during design. © The Author 2017. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

  14. Assessing cost-effectiveness of specific LID practice designs in response to large storm events

    Science.gov (United States)

    Chui, Ting Fong May; Liu, Xin; Zhan, Wenting

    2016-02-01

    Low impact development (LID) practices have become more important in urban stormwater management worldwide. However, most research on design optimization focuses on relatively large scale, and there is very limited information or guideline regarding individual LID practice designs (i.e., optimal depth, width and length). The objective of this study is to identify the optimal design by assessing the hydrological performance and the cost-effectiveness of different designs of LID practices at a household or business scale, and to analyze the sensitivity of the hydrological performance and the cost of the optimal design to different model and design parameters. First, EPA SWMM, automatically controlled by MATLAB, is used to obtain the peak runoff of different designs of three specific LID practices (i.e., green roof, bioretention and porous pavement) under different design storms (i.e., 2 yr and 50 yr design storms of Hong Kong, China and Seattle, U.S.). Then, life cycle cost is estimated for the different designs, and the optimal design, defined as the design with the lowest cost and at least 20% peak runoff reduction, is identified. Finally, sensitivity of the optimal design to the different design parameters is examined. The optimal design of green roof tends to be larger in area but thinner, while the optimal designs of bioretention and porous pavement tend to be smaller in area. To handle larger storms, however, it is more effective to increase the green roof depth, and to increase the area of the bioretention and porous pavement. Porous pavement is the most cost-effective for peak flow reduction, followed by bioretention and then green roof. The cost-effectiveness, measured as the peak runoff reduction/thousand Dollars of LID practices in Hong Kong (e.g., 0.02 L/103 US s, 0.15 L/103 US s and 0.93 L/103 US s for green roof, bioretention and porous pavement for 2 yr storm) is lower than that in Seattle (e.g., 0.03 L/103 US s, 0.29 L/103 US s and 1.58 L/103 US s for

  15. Designing Class Activities to Meet Specific Core Training Competencies: A Developmental Approach

    Science.gov (United States)

    Guth, Lorraine J.; McDonnell, Kelly A.

    2004-01-01

    This article presents a developmental model for designing and utilizing class activities to meet specific Association for Specialists in Group Work (ASGW) core training competencies for group workers. A review of the relevant literature about teaching group work and meeting core training standards is provided. The authors suggest a process by…

  16. Buffer Rod Design for Measurement of Specific Gravity in the Processing of Industrial Food Batters

    DEFF Research Database (Denmark)

    Fox, Paul D.; Smith, Penny Probert

    2002-01-01

    A low cost perspex buffer rod design for the measurement of specific gravity during the processing of industrial food batters is reported. Operation was conducted in pulsed mode using a 2.25 MHz, 15 mm diameter transducer and the intensity and an analytic calibration curve relating buffer rod...

  17. Production of specific structured lipids by enzymatic interesterification: optimization of the reaction by response surface design

    DEFF Research Database (Denmark)

    Xu, Xuebing; Skands, Anja Rebecca Havegaard; Adler-Nissen, Jens

    1998-01-01

    Rapeseed oil and capric acid were interesterified in solvent-free media catalyzed by Lipozyme IM (Rhizomucor miehei) to produce specific-structured lipids (SSLs). The process was optimized by response surface design concerning the effects of acyl migration and the by-products of diacylglycerols...

  18. Mod-5A wind turbine generator program design report. Volume 4: Drawings and specifications, book 5

    Science.gov (United States)

    1984-01-01

    The design, development and analysis of the 7.3 MW MOD-5A wind turbine generator is documented. There are four volumes. This volume contains the drawings and specifications that were developed in preparation for building the MOD-5A wind turbine generator. Detail drawings of several assemblies and subassemblies are given. This is the fifth book of volume 4.

  19. 7 CFR 1717.605 - Design standards, plans and specifications, construction standards, and RUS accepted materials.

    Science.gov (United States)

    2010-01-01

    ..., construction standards, and RUS accepted materials. 1717.605 Section 1717.605 Agriculture Regulations of the... standards, plans and specifications, construction standards, and RUS accepted materials. All borrowers... system design, construction standards, and the use of RUS accepted materials. Borrowers must comply with...

  20. Tolerance design of patient-specific range QA using the DMAIC framework in proton therapy.

    Science.gov (United States)

    Rah, Jeong-Eun; Shin, Dongho; Manger, Ryan P; Kim, Tae Hyun; Oh, Do Hoon; Kim, Dae Yong; Kim, Gwe-Ya

    2018-02-01

    To implement the DMAIC (Define-Measure-Analyze-Improve-Control) can be used for customizing the patient-specific QA by designing site-specific range tolerances. The DMAIC framework (process flow diagram, cause and effect, Pareto chart, control chart, and capability analysis) were utilized to determine the steps that need focus for improving the patient-specific QA. The patient-specific range QA plans were selected according to seven treatment site groups, a total of 1437 cases. The process capability index, C pm was used to guide the tolerance design of patient site-specific range. For prostate field, our results suggested that the patient range measurements were capable at the current tolerance level of ±1 mm in clinical proton plans. For other site-specific ranges, we analyzed that the tolerance tends to be overdesigned to insufficient process capability calculated by the patient-specific QA data. The customized tolerances were calculated for treatment sites. Control charts were constructed to simulate the patient QA time before and after the new tolerances were implemented. It is found that the total simulation QA time was decreased on average of approximately 20% after establishing new site-specific range tolerances. We simulated the financial impact of this project. The QA failure for whole process in proton therapy would lead up to approximately 30% increase in total cost. DMAIC framework can be used to provide an effective QA by setting customized tolerances. When tolerance design is customized, the quality is reasonably balanced with time and cost demands. © 2017 American Association of Physicists in Medicine.