Remote inspection of steam turbine blades

International Nuclear Information System (INIS)

Anon.

1987-01-01

During the past five years Reinhart and Associates, Inc. has been involved in remote examination of L-0 and L-1 steam turbine blade rows of in-place LP turbines using visual and eddy current techniques. These tests have concentrated on the trailing edge and blade-to-rotor attachment (Christmas tree) areas. These remote nondestructive examinations were performed through hand access ports of the inner shell. Since the remote scanning system was in a prototype configuration, the inspection was highly operator-dependent. Refinement of the scanning equipment would considerably improve the efficiency of the test; however, the feasibility of remote in-place inspection of turbine blades was established. To further improve this technology, and to provide for remote inspection of other areas of the blade and additional turbine designs, EPRI is funding a one-year project with Reinhart and Associates, Inc. This project will develop a new system that employs state-of-the-art multifrequency eddy current techniques, a miniature charged coupled device (CCD) television camera, and remote positioning equipment. Project results from the first six months are presented

75 FR 42436 - Houston Pipe Line Company LP-Bammel Storage, Docket No. PR10-51-000, et. al.; Notice of Baseline...

Science.gov (United States)

2010-07-21

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission Houston Pipe Line Company LP--Bammel Storage, Docket No. PR10-51- 000, et. al.; Notice of Baseline Filings July 14, 2010. Houston Pipe Line..., 2010, respectively the applicants listed above submitted their baseline filing of its Statement of...

Licensee contractor and vendor inspection status report

International Nuclear Information System (INIS)

1994-04-01

This periodical covers the results of inspections performed by the NRC's Vendor Inspection Branch that have been distributed to the inspected organizations during the period form January 1994 through March 1994. A list of selected bulletins and information notices involving vendor issues and copies of pertinent correspondence involving vendor issues are also included in this periodical

View of the LP gas supply/demand in Asia and a survey of the Middle East trend; Asia no LP gas jukyu tenbo to Chuto doko chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-09-01

A study was made on the LP gas supply/demand in Asia including an outlook for 2000. Eleven countries in Asia including NIES countries, ASEAN countries, China and India have been continuing their rapid growth of economy and have rapidly been increasing their energy consumption. There, LP gas spreads as a home use fuel, and countries excluding some LP gas producing countries depend considerably upon the import from the Middle East. The LP gas consumption quantity is steadily increasing in China and India having huge population, etc., and dependence of LP gas is increasing upon LP gas producing countries of the Middle East. Nevertheless, in the Middle East, the domestic consumption of LP gas, mostly butane, is increasing. Namely, butane is used as raw material of MTBE, and LP gas as that of petroleum chemicals. The Middle East has a lot of plant projects of a sizable size in the future, which predicts that LP gas export from LP gas producing countries of the Middle East is decreasing. 2 refs., 62 figs., 57 tabs.

LP formulation of asymmetric zero-sum stochastic games

KAUST Repository

Li, Lichun

2014-12-15

This paper provides an efficient linear programming (LP) formulation of asymmetric two player zero-sum stochastic games with finite horizon. In these stochastic games, only one player is informed of the state at each stage, and the transition law is only controlled by the informed player. Compared with the LP formulation of extensive stochastic games whose size grows polynomially with respect to the size of the state and the size of the uninformed player\\'s actions, our proposed LP formulation has its size to be linear with respect to the size of the state and the size of the uninformed player, and hence greatly reduces the computational complexity. A travelling inspector problem is used to demonstrate the efficiency of the proposed LP formulation.

LP formulation of asymmetric zero-sum stochastic games

KAUST Repository

Li, Lichun; Shamma, Jeff S.

2014-01-01

This paper provides an efficient linear programming (LP) formulation of asymmetric two player zero-sum stochastic games with finite horizon. In these stochastic games, only one player is informed of the state at each stage, and the transition law is only controlled by the informed player. Compared with the LP formulation of extensive stochastic games whose size grows polynomially with respect to the size of the state and the size of the uninformed player's actions, our proposed LP formulation has its size to be linear with respect to the size of the state and the size of the uninformed player, and hence greatly reduces the computational complexity. A travelling inspector problem is used to demonstrate the efficiency of the proposed LP formulation.

Inspection of rotor bores, retaining rings and turbine discs utilizing UDRPS

International Nuclear Information System (INIS)

Quinn, J.R.

1990-01-01

New construction in the U.S. utility industry is at a very low level. The average age of plants in increasing almost linearly with time, many units will pass nominal end of life in the next decade. Planned new construction now takes ten years to effect at a minimum. The need for more reliable inspection of high stress utility components is and will continue to be a subject of increased emphasis. Dynacon Systems Inc. has recently introduced into commercial service, a fully automated ultrasonic inspection instrumentation package designed to significantly increase the reliability of turbine/generator rotor shaft, LP disc and generator retaining ring inspections. The package is designed to automate to a very high degree, the entire analysis process, thus eliminating operator error sources. The automated process begins at the ultrasonic pulse generator and ends with the input to fracture mechanics analysis

Flygtninge på langvarig starthjælp

DEFF Research Database (Denmark)

Johansen, Adam; Højland, Marianne; Hansen, Henning

Spørgeskema-, fokusgruppe- og interviewbaseret undersøgelse af personlige og sociale konsekvenser af familiers forsørgelse på starthjælp. Kvalitativ og kvantitativ undersøgelse af starthjælpens konsekvenser for flygtningefamilier med mere end 1 år på starthjælp...

49 CFR 396.11 - Driver vehicle inspection report(s).

Science.gov (United States)

2010-10-01

... INSPECTION, REPAIR, AND MAINTENANCE § 396.11 Driver vehicle inspection report(s). (a) Report required—(1... shall repair any defect or deficiency listed on the driver vehicle inspection report which would be... defect or deficiency has been repaired or that repair is unnecessary before the vehicle is operated again...

Trigonometric bases for matrix weighted Lp-spaces

DEFF Research Database (Denmark)

Nielsen, Morten

2010-01-01

We give a complete characterization of 2π-periodic matrix weights W for which the vector-valued trigonometric system forms a Schauder basis for the matrix weighted space Lp(T;W). Then trigonometric quasi-greedy bases for Lp(T;W) are considered. Quasi-greedy bases are systems for which the simple...

Genetic invalidation of Lp-PLA2 as a therapeutic target

DEFF Research Database (Denmark)

Gregson, John M; Freitag, Daniel F; Surendran, Praveen

2017-01-01

AIMS: Darapladib, a potent inhibitor of lipoprotein-associated phospholipase A2 (Lp-PLA2), has not reduced risk of cardiovascular disease outcomes in recent randomized trials. We aimed to test whether Lp-PLA2 enzyme activity is causally relevant to coronary heart disease. METHODS: In 72...... (Val379Ala (rs1051931)) in PLA2G7, the gene encoding Lp-PLA2. We supplemented de-novo genotyping with information on a further 45,823 coronary heart disease patients and 88,680 controls in publicly available databases and other previous studies. We conducted a systematic review of randomized trials...... to compare effects of darapladib treatment on soluble Lp-PLA2 activity, conventional cardiovascular risk factors, and coronary heart disease risk with corresponding effects of Lp-PLA2-lowering alleles. RESULTS: Lp-PLA2 activity was decreased by 64% (p = 2.4 × 10(-25)) with carriage of any of the four loss...

Lp-dual affine surface area forms of Busemann–Petty type problems

Indian Academy of Sciences (India)

Associated with the notion of Lp-intersection body which was defined ... Lp-dual affine surface area; Lp-intersection body; Busemann–Petty ..... [11] Schneider R, Convex Bodies: The Brunn–Minkowski Theory (1993) (Cambridge: Cam-.

LpMab-19 Recognizes Sialylated O-Glycan on Thr76 of Human Podoplanin.

Science.gov (United States)

Ogasawara, Satoshi; Kaneko, Mika K; Kato, Yukinari

2016-08-26

Human podoplanin (hPDPN) is expressed in lymphatic vessels, pulmonary type-I alveolar cells, and renal glomerulus. The hPDPN/C-type lectin-like receptor-2 (CLEC-2) interaction is involved in platelet aggregation and cancer metastasis. High expression of hPDPN in cancer cells or cancer-associated fibroblasts (CAFs) leads to a poor prognosis for cancer patients. In our previous research, we reported on several anti-hPDPN monoclonal antibodies (mAbs), including LpMab-2, LpMab-3, LpMab-7, LpMab-9, LpMab-12, LpMab-13, and LpMab-17 of mouse IgG 1 subclass, which were produced using CasMab technology. Here we produced a novel anti-hPDPN mAb LpMab-19 of mouse IgG 2b subclass. Flow cytometry revealed that the epitope of LpMab-19 includes O-glycan, which is attached to Thr76 of hPDPN. We further identified the minimum epitope of LpMab-19 as Thr76-Arg79 of hPDPN. Immunohistochemistry revealed that LpMab-19 is useful for detecting not only normal cells, including lymphatic vessels, but also glioblastoma and oral squamous cell carcinoma cells. LpMab-19 could be useful for investigating the physiological function of O-glycosylated hPDPN.

28 CFR 5.501 - Inspection of books and records.

Science.gov (United States)

2010-07-01

... 28 Judicial Administration 1 2010-07-01 2010-07-01 false Inspection of books and records. 5.501... AGENTS REGISTRATION ACT OF 1938, AS AMENDED § 5.501 Inspection of books and records. Officials of the... Act to inspect the books and records listed in § 5.500(a). [Order No. 376-67, 32 FR 6362, Apr. 22...

LEP dominates LP-HEP

Energy Technology Data Exchange (ETDEWEB)

Fraser, Gordon

1991-09-15

CERN's LEP electron-positron collider was the star of this year's major physics meeting - the Joint International Lepton-Photon Symposium and Europhysics Conference on High Energy Physics (LP-HEP) - held in Geneva from 25 July - 1 August.

78 FR 45592 - DeltaPoint Capital IV, LP;

Science.gov (United States)

2013-07-29

..., Suite 160, Pittsford, NY 14534. The financing was contemplated for working capital. The financing is... SMALL BUSINESS ADMINISTRATION [License No. 02/02-0662] DeltaPoint Capital IV, LP; Notice Seeking... given that DeltaPoint Capital IV, L.P., 45 East Avenue, 6th Floor, Rochester, NY 14604, Federal...

75 FR 14576 - Procurement List Additions

Science.gov (United States)

2010-03-26

... Inspection Service, Minneapolis, MN. M.R. Laundry Products NSN: MR 1103--Heavy Duty Laundry Bag. NSN: MR 1104... procurement list. SUMMARY: This action adds to the Procurement List products and services to be furnished by... products and services and impact of the additions on the current or most recent contractors, the Committee...

Sparse Adaptive Channel Estimation Based on lp-Norm-Penalized Affine Projection Algorithm

Directory of Open Access Journals (Sweden)

Yingsong Li

2014-01-01

Full Text Available We propose an lp-norm-penalized affine projection algorithm (LP-APA for broadband multipath adaptive channel estimations. The proposed LP-APA is realized by incorporating an lp-norm into the cost function of the conventional affine projection algorithm (APA to exploit the sparsity property of the broadband wireless multipath channel, by which the convergence speed and steady-state performance of the APA are significantly improved. The implementation of the LP-APA is equivalent to adding a zero attractor to its iterations. The simulation results, which are obtained from a sparse channel estimation, demonstrate that the proposed LP-APA can efficiently improve channel estimation performance in terms of both the convergence speed and steady-state performance when the channel is exactly sparse.

LEP dominates LP-HEP

International Nuclear Information System (INIS)

Fraser, Gordon

1991-01-01

CERN's LEP electron-positron collider was the star of this year's major physics meeting - the Joint International Lepton-Photon Symposium and Europhysics Conference on High Energy Physics (LP-HEP) - held in Geneva from 25 July - 1 August

PuLP/XtraPuLP : Partitioning Tools for Extreme-Scale Graphs

Energy Technology Data Exchange (ETDEWEB)

2017-09-21

PuLP/XtraPulp is software for partitioning graphs from several real-world problems. Graphs occur in several places in real world from road networks, social networks and scientific simulations. For efficient parallel processing these graphs have to be partitioned (split) with respect to metrics such as computation and communication costs. Our software allows such partitioning for massive graphs.

CORN, LP Goldfield Approval

Science.gov (United States)

This November 19, 2015 letter from EPA approves the petition from CORN, LP, Goldfield facility, regarding non-grandfathered ethanol produced through a dry mill process, qualifying under the Clean Air Act for renewable fuel (D-code 6) RINs under the RFS pro

In-service inspection and maintenance schedule for a typical TRIGA Mark-II reactor

International Nuclear Information System (INIS)

Boeck, H.

1996-05-01

This report lists all the systems and components of the TRIGA reactor Vienna which are inspected and maintained in regular intervals. These intervals are categorized in monthly, quarterly, semi-annual and annual inspections. Further the type of inspection and the responsibility for the inspection is shown. For each component specific inspection sheets have been developed, some examples are given in the annex. (author)

75 FR 38514 - Application to Export Electric Energy; Brookfield Energy Marketing LP

Science.gov (United States)

2010-07-02

... Energy Marketing LP AGENCY: Office of Electricity Delivery and Energy Reliability, DOE. ACTION: Notice of application. SUMMARY: Brookfield Energy Marketing LP (BEM LP) has applied for authority to transmit electric... surplus energy purchased from electric utilities, Federal power marketing agencies and other entities...

PROMSYS, Plant Equipment Maintenance and Inspection Scheduling

International Nuclear Information System (INIS)

Morgan, D.L.; Srite, B.E.

1986-01-01

1 - Description of problem or function: PROMSYS is a computer system designed to automate the scheduling of routine maintenance and inspection of plant equipment. This 'programmed maintenance' provides the detailed planning and accomplishment of lubrication, inspection, and similar repetitive maintenance activities which can be scheduled at specified predetermined intervals throughout the year. The equipment items included are the typical pumps, blowers, motors, compressors, automotive equipment, refrigeration units, filtering systems, machine shop equipment, cranes, elevators, motor-generator sets, and electrical switchgear found throughout industry, as well as cell ventilation, shielding, containment, and material handling equipment unique to nuclear research and development facilities. Four related programs are used to produce sorted schedule lists, delinquent work lists, and optional master lists. Five additional programs are used to create and maintain records of all scheduled and unscheduled maintenance history. 2 - Method of solution: Service specifications and frequency are established and stored. The computer program reviews schedules weekly and prints, on schedule cards, instructions for service that is due the following week. The basic output from the computer program comes in two forms: programmed-maintenance schedule cards and programmed-maintenance data sheets. The data sheets can be issued in numerical building, route, and location number sequence as equipment lists, grouped for work assigned to a particular foreman as the foreman's equipment list, or grouped by work charged to a particular work order as the work-order list. Data sheets grouped by equipment classification are called the equipment classification list

Online lektiehjælp

DEFF Research Database (Denmark)

Hansen, Jens Jørgen; Remvig, Kirstin

2016-01-01

vejledningsdidaktik, herunder metoder, modeller og materialer for lektievejledning i regi af Lektier Online. Lektier Online er en organisation ved Statsbiblioteket i Århus, der tilbyder en online lektiecafe, hvor bl.a. gymnasie-elever kan få hjælp af frivillige universitetsstuderende. Dette didaktiske de-sign er et...

2-LP mode few-mode fiber amplifier employing ring-core erbium-doped fiber.

Science.gov (United States)

Ono, Hirotaka; Hosokawa, Tsukasa; Ichii, Kentaro; Matsuo, Shoichiro; Nasu, Hitoshi; Yamada, Makoto

2015-10-19

A fiber amplifier supporting 2 LP modes that employs a ring-core erbium-doped fiber (RC-EDF) is investigated to reduce differential modal gain (DMG). The inner and outer radii of the ring-core of the RC-EDF are clarified for 2-LP mode operation of the amplifier, and are optimized to reduce the DMG. It is shown that using the overlap integral between the erbium-doped core area and the signal power mode distribution is a good way to optimize the inner and outer radii of the ring-core of the RC-EDF and thus minimize the DMG. A fabricated RC-EDF and a constructed 2-LP mode EDFA are described and a small DMG of around 1 dB is realized for LP01, LP11 and LP21 pumping.

Hanford site post-NPH building inspection plan

International Nuclear Information System (INIS)

Wagenblast, G.R. Westinghouse Hanford

1996-01-01

This plan establishes consistent post-NPH building inspection procedures and defines a procedure for prioritization of buildings for inspection to ensure the safety of facilities prior to reentry. Qualification of systems for restart of operation is not included. This plan takes advantage, where possible, of existing national procedures for post-NPH inspection of buildings, of existing structural design and evaluation documentation of Hanford facilities, and current and proposed seismic instrumentation located throughout the Hanford site. A list of buildings, prioritized according to current building safety function and building vulnerability (without regard for or information about a damaging natural forces event) is provided

LpMab-23: A Cancer-Specific Monoclonal Antibody Against Human Podoplanin.

Science.gov (United States)

Yamada, Shinji; Ogasawara, Satoshi; Kaneko, Mika K; Kato, Yukinari

2017-04-01

Human podoplanin (hPDPN), the ligand of C-type lectin-like receptor-2, is involved in cancer metastasis. Until now, many monoclonal antibodies (mAbs) have been established against hPDPN. However, it is still difficult to develop a cancer-specific mAb (CasMab) against hPDPN because the protein sequence of hPDPN expressed in cancer cells is the same as that in normal cells. Herein, we report LpMab-23 of the mouse IgG 1 subclass, a novel CasMab against hPDPN. In an immunohistochemical analysis, LpMab-23 reacted with tumor cells of human oral cancer, but did not react with normal cells such as lymphatic endothelial cells (LECs). In contrast, LpMab-17, another anti-hPDPN mAb, reacted with both tumor cells and LECs. Furthermore, flow cytometric analysis revealed that LpMab-23 reacted with hPDPN-expressing cancer cell lines (LN319, RERF-LC-AI/hPDPN, Y-MESO-14/hPDPN, and HSC3/hPDPN) but showed little reaction with normal cells (LECs and HEK-293T), although another anti-hPDPN mAb, LpMab-7, reacted with both hPDPN-expressing cancer cells and normal cells, indicating that LpMab-23 is a CasMab against hPDPN.

7 CFR 301.91-7 - Assembly and inspection of regulated articles.

Science.gov (United States)

2010-01-01

... Inspectors are assigned to local offices of Plant Protection and Quarantine which are listed in telephone... Inspection Service, Plant Protection and Quarantine, Domestic and Emergency Operations, 4700 River Road Unit... PLANT HEALTH INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE DOMESTIC QUARANTINE NOTICES European Larch...

LibraryH3lp: A New Flexible Chat Reference System

Directory of Open Access Journals (Sweden)

Pam Sessoms

2008-09-01

Full Text Available LibraryH3lp is an integrated IM and web chat system designed specifically for Virtual Reference services in libraries. The software was designed for, and is currently used by, a night-time chat reference collaboraton between several large academic libraries. LibraryH3lp is designed for the workflow of chat reference, supporting multiple simultaneous operators and routing to queues of operators in a particular service area. It also supports web page embeddable chat 'widgets', as well as simultaneous gateways to multiple IM protocols. This article discusses the motivation for the development of the software, and provides an overview of LibraryH3lp's features and technical architecture. Parts of LibraryH3lp are available as open source. The complete application is available as a low-cost hosted service, and will eventually be available to be licensed for local hosting.

76 FR 49760 - Texas Eastern Transmission, LP; Notice of Application

Science.gov (United States)

2011-08-11

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. CP11-524-000] Texas Eastern Transmission, LP; Notice of Application Take notice that on July 29, 2011, Texas Eastern Transmission, LP (Texas Eastern), 5400 Westheimer Court, Houston, Texas 77056-5310, filed with the Federal Energy...

76 FR 7833 - Texas Eastern Transmission, LP; Notice of Application

Science.gov (United States)

2011-02-11

...] Texas Eastern Transmission, LP; Notice of Application Take notice that on January 25, 2011, Texas Eastern Transmission, LP (Texas Eastern), 5400 Westheimer Court, Houston, Texas 77056, filed in the above... TEAM 2012 Project. Specifically, Texas Eastern requests: (i) Authorization under NGA sections 7(b) and...

New low pressure (LP) turbines for NE Krsko

International Nuclear Information System (INIS)

Nemcic, K.; Novsak, M.

2004-01-01

During the evaluation of possible future maintenance strategies on steam turbine in very short period of time, engineering decision was made by NE Krsko in agreement with Owners to replace the existing two Low Pressure (LP) Turbines with new upgrading LP Turbines. This decision is presented with review of the various steam turbine problems as: SCC on turbine discs; blades cracking; erosion-corrosion with comparison of various maintenance options and efforts undertaken by the NE Krsko to improve performance of the original low pressure turbines. This paper presents the NEK approach to solve the possible future problems with steam turbine operation in NE Krsko as pro-active engineering and maintenance activities on the steam turbine. This paper also presents improvements involving retrofits, confined to the main steam turbine path, with major differences between original and new LP Turbines as beneficial replacement because of turbine MWe upgrading and return capital expenditures.(author)

The role of LP gas in eradicating energy poverty

Energy Technology Data Exchange (ETDEWEB)

Kelly, Michael; Behuria, Sarthak

2010-09-15

LP Gas is an ideal solution for dealing with energy poverty. Clean burning, low carbon, extremely efficient, requiring minimal infrastructure or R and D investment and with plentiful long term global supply, LP Gas can be quickly introduced to play an important role in eradicating energy poverty and steering both industrialised and developing countries onto more sustainable energy development paths.

78 FR 43874 - Texas Eastern Transmission, LP; Notice of Application

Science.gov (United States)

2013-07-22

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. CP13-514-000] Texas Eastern Transmission, LP; Notice of Application On July 2, 2013, Texas Eastern Transmission, LP (Texas Eastern) filed... natural gas facilities no longer in service. As described more fully in the Application, Texas Eastern...

76 FR 38381 - Texas Eastern Transmission, LP; Notice of Amendment

Science.gov (United States)

2011-06-30

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. CP11-67-001] Texas Eastern Transmission, LP; Notice of Amendment Take notice that on June 13, 2011, Texas Eastern Transmission, LP (Texas Eastern), 5400 Westheimer Court, Houston, Texas 77056, filed in the above referenced docket an amendment...

77 FR 20015 - Texas Eastern Transmission, LP; Notice of Application

Science.gov (United States)

2012-04-03

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. CP12-88-000] Texas Eastern Transmission, LP; Notice of Application Take notice that on March 19, 2012, Texas Eastern Transmission, LP (Texas Eastern), 5400 Westheimer Court, Houston, Texas 77056-5310, filed an application in Docket No...

77 FR 12045 - Texas Eastern Transmission, LP; Notice of Application

Science.gov (United States)

2012-02-28

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. CP12-68-000] Texas Eastern Transmission, LP; Notice of Application Take notice that on February 16, 2012, Texas Eastern Transmission, LP (Texas Eastern), PO Box 1642, Houston, Texas 77056 filed an application in the above referenced docket...

78 FR 32294 - DeltaPoint Capital IV, L.P., DeltaPoint Capital IV (New York), L.P., License No. 02/02-0662,02/02...

Science.gov (United States)

2013-05-29

... Small Business Investment Act of 1958, as amended (``the Act''), in connection with the financing of a... SMALL BUSINESS ADMINISTRATION DeltaPoint Capital IV, L.P., DeltaPoint Capital IV (New York), L.P., License No. 02/02-0662,02/02-0661; Notice Seeking Exemption Under Section 312 of the Small Business...

78 FR 66352 - Texas Eastern Transmission, LP; Notice of Application

Science.gov (United States)

2013-11-05

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. CP14-9-000] Texas Eastern Transmission, LP; Notice of Application Take notice that on October 17, 2013, Texas Eastern Transmission, LP (Texas Eastern), 5400 Westheimer Court, Houston, Texas 77056, filed an application in Docket No. CP14-9...

78 FR 79687 - Texas Eastern Transmission, LP; Notice of Application

Science.gov (United States)

2013-12-31

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. CP14-29-000] Texas Eastern Transmission, LP; Notice of Application Take notice that on December 10, 2013 Texas Eastern Transmission, LP (Texas Eastern), at 5400 Westheimer Court, Houston, Texas 77056, filed an application in Docket No. CP14...

77 FR 26534 - Texas Eastern Transmission, LP; Notice of Application

Science.gov (United States)

2012-05-04

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. CP12-164-000] Texas Eastern Transmission, LP; Notice of Application Take notice that on April 19, 2012, Texas Eastern Transmission, LP (Texas Eastern), 5400 Westheimer Court, Houston, Texas 77056, filed in Docket No. CP12-164-000, a request...

Diagnostic Inspection of Pipelines for Estimating the State of Stress in Them

Science.gov (United States)

Subbotin, V. A.; Kolotilov, Yu. V.; Smirnova, V. Yu.; Ivashko, S. K.

2017-12-01

The diagnostic inspection used to estimate the technical state of a pipeline is described. The problems of inspection works are listed, and a functional-structural scheme is developed to estimate the state of stress in a pipeline. Final conclusions regarding the actual loading of a pipeline section are drawn upon a cross analysis of the entire information obtained during pipeline inspection.

Significance of Lipiodol-CT in the evaluation of therapeutic effects of Lp-TAE for hepatocellular carcinoma

International Nuclear Information System (INIS)

Jinno, Kenji; Tokuyama, Katuyuki; Yumoto, Yasuhiro

1988-01-01

In 20 lesions of 17 patients treated with arterial infusion of SMANCS dissolved in lipiodol (Lp) and transcatheter arterial embolization (TAE) for hepatocellular carcinoma (HCC), Lp deposition within the tumor were depicted on CT (Lp-CT). The findings of Lp-CT were compared with those of macroscopic, soft X-ray, and histologic examinations for resected specimens. Lp-CT appearance of HCC fell into four types: (I) complete type - round and homogeneous high density area (HDA) - in which Lp was deposited over the whole area; (II) defective type - inhomogeneous HDA - in which Lp was deposited in part of the tumor; (III) aggregated type - aggregation of small HDA; (IV) deficient type - no HDA - in which little or no Lp was deposited. Type I was found in 20 % of the lesions, type II in 25 %, type III in 20 %, and type IV in 35 %. In type I, HCC was of macroscopically nodular form with expansive growth and pseudocapsule and of histologically trabecular form with broad blood spaces and inviable cancer cells. In the other types, similar findings were seen in the necrotic area in which Lp was deposited, whereas scirrhous or compact type of HCC was histologically seen in the area containing viable cancer cells in which no Lp was deposited. The presence or not of Lp deposition, as depicted on CT, was closely correlated with histologic findings, which has significant implications for the evaluation of therapeutic efficacy of TAE with Lp. (Namekawa, K.)

78 FR 11567 - Airworthiness Directives; Gulfstream Aerospace LP (Type Certificate Previously Held by Israel...

Science.gov (United States)

2013-02-19

... Airworthiness Directives; Gulfstream Aerospace LP (Type Certificate Previously Held by Israel Aircraft... Aerospace LP (Type Certificate Previously Held by Israel Aircraft Industries, Ltd.) Model Gulfstream G150... Gulfstream Aerospace LP (Type Certificate Previously Held by Israel Aircraft Industries, Ltd.): Amendment 39...

76 FR 70040 - Airworthiness Directives; Gulfstream Aerospace LP (Type Certificate Previously Held by Israel...

Science.gov (United States)

2011-11-10

... Airworthiness Directives; Gulfstream Aerospace LP (Type Certificate Previously Held by Israel Aircraft... Aerospace LP (type certificate previously held by Israel Aircraft Industries, Ltd.) Model Galaxy and... new AD: 2011-23-07 Gulfstream Aerospace LP (Type Certificate Previously Held by Israel Aircraft...

On $L_p$ Affine Surface Area and Curvature Measures

OpenAIRE

Zhao, Yiming

2015-01-01

The relationship between $L_p$ affine surface area and curvature measures is investigated. As a result, a new representation of the existing notion of $L_p$ affine surface area depending only on curvature measures is derived. Direct proofs of the equivalence between this new representation and those previously known are provided. The proofs show that the new representation is, in a sense, "polar" to that of Lutwak's and "dual" to that of Sch\\"utt & Werner's.

A New Algorithm for Detecting Cloud Height using OMPS/LP Measurements

Science.gov (United States)

Chen, Zhong; DeLand, Matthew; Bhartia, Pawan K.

2016-01-01

The Ozone Mapping and Profiler Suite Limb Profiler (OMPS/LP) ozone product requires the determination of cloud height for each event to establish the lower boundary of the profile for the retrieval algorithm. We have created a revised cloud detection algorithm for LP measurements that uses the spectral dependence of the vertical gradient in radiance between two wavelengths in the visible and near-IR spectral regions. This approach provides better discrimination between clouds and aerosols than results obtained using a single wavelength. Observed LP cloud height values show good agreement with coincident Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) measurements.

46 CFR 153.8 - Procedures for requesting an endorsed Certificate of Inspection.

Science.gov (United States)

2010-10-01

... endorsed Certificate of Inspection that § 153.900 requires for a ship to carry a cargo listed in Table 1... Inspection. 153.8 Section 153.8 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SHIPS CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS...

Amplitude and Recurrence Time of LP activity at Mt. Etna, Italy

Science.gov (United States)

Cauchie, Léna; Saccorotti, Gilberto; Bean, Christopher

2013-04-01

The manifestation of Long-Period (LP) activity is attested on many volcanoes worldwide and is thought to be associated with the resonant oscillations of subsurface, fluid-filled, cracks and conduits. Nonetheless the actual source mechanism that originates the resonance is still unclear. Different models have been proposed so far, including (i) fluid flow instabilities as periodic degassing and (ii) brittle failure in viscous magmas. Since LP activity usually precedes and accompanies volcanic eruption, the understanding of these sources is crucial for the hazard assessment and eruption early warning. The work is aimed at improving the understanding of the LP source mechanism through a statistical analysis of detailed LP catalogues. The behaviour of LP activity is compared with the empirical laws governing earthquakes recurrence (e.g., Gutenberg-Richter [GR] and Gamma-law distributions), in order to understand what relationships, if any, exist between these two apparently different earthquake classes. In particular, about 13000 events were detected on Mount Etna in August 2005 through a STA/LTA method. For this given period, the volcano does not present particular sign of unrest. The manifestation of the LP events is sustained in time over all the period of analysis. From the analysis of the directional properties, it turns out that the events of this first catalog propagate from 2 distinct sources . Furthermore, the events exhibit a high degree of waveform similarity, and provide a criterion for classification/source separation. The events were then grouped into families of comparable waveforms, resulting also in a separation for their source locations. We then used template signals of each family for a Matched-Filtering of the continuous data streams, in order to discriminate small-amplitude events previously undetected by the STA/LTA triggering method. This procedure allowed for a significant enrichment of the catalogues. The retrieved amplitude distributions

Regulatory inspection activities related to inspection planning, plant maintenance and assessment of safety. Proceedings of an international workshop

International Nuclear Information System (INIS)

Van Binnebeek, J.J.; Aubrey, Richard; Grandame, Melvyn; Aro, Ilari; Balloffet, Yves; Klonk, Hartmut; Manzella, Pietro; Koizumi, Hiroyoshi; Bouvrie, E.C. des; Forsberg, Staffan; Lang, Hans-Guenter; Mehew, Robert; Warren, Thomas; Woodhouse, Paul; Gallo, Robert M.; Campbell, Rob; )

1997-01-01

The NEA Committee on Nuclear Regulatory Activities (CNRA) believes that an essential factor in ensuring the safety of nuclear installations is the continuing exchange and analysis of technical information and data. To facilitate this exchange the Committee has established Working Groups and Groups of Experts in specialised topics. CNRA believes that safety inspections are a major element in the regulatory authority's efforts to ensure the safe operation of nuclear facilities. Considering the importance of these issues, the Committee has established a special Working Group on Inspection Practices (WGIP). The purpose of WGIP, is to facilitate the exchange of information and experience related to regulatory safety inspections between CNRA Member countries. This was the 3. international workshop held by the WGIP on regulatory inspection activities. The focus of this workshop was on 3 main topics; Inspection Planning, Plant Maintenance and Assessment of Safety. This document presents the proceedings from the workshop, including: workshop programme, results and conclusions, papers and presentations and the list of participants. The main purpose of the Workshop is to provide a forum of exchange of information on the regulatory inspection activities

Regulatory inspection activities related to inspection planning, plant maintenance and assessment of safety. Proceedings of an international workshop

Energy Technology Data Exchange (ETDEWEB)

Van Binnebeek, J. J. [AIB-Vincotte Nuclear - AVN, Avenue du Roi, 157, B-1060 Brussels (Belgium); Aubrey, Richard; Grandame, Melvyn [Atomic Energy Control Board - AECB, P.O. Box 1046, Station B, 280 Slater Street, Ottawa, Ontario K1P 5S9 (Canada); Aro, Ilari [Finnish Centre for Radiation and Nuclear Safety - STUK, P.O. Box 14, FIN-00881 Helsinki (Finland); Balloffet, Yves [DRIRE Rhone Alpes, 146, rue Pierre Corneille, 69426 Lyon CEDEX 03 (France); Klonk, Hartmut [Bundesamt fuer Strahlenschutz - BfS, Federal Office for Radiation Protection, Postbox 10 01 49, 38201 Salzgitter 1 (Germany); Manzella, Pietro [A.N.P.A., Via V. Brancati, 48, 1-00144 Roma EUR (Italy); Koizumi, Hiroyoshi [Tech. Stan. Dept. - JAPEIC, Shin-Toranomon Bldg., 1-5-11, Akasaka, Minato-ku, Tokyo 107 (Japan); Bouvrie, E.C. des [Ministry of Social Affairs and Employment, Nuclear Safety Dept. KFD, P.O. Box 90804, 2509 LV The Hague (Netherlands); Forsberg, Staffan [Swedish Nuclear Power Inspectorate - SKI, Klarabergsviadukten 90, S-10658 Stockholm (Sweden); Lang, Hans-Guenter [Section Plant Coordination and Inspection, Swiss Federal Nuclear Safety Inspectorate - HSK, CH-5232 Villigen-HSK (Switzerland); Mehew, Robert; Warren, Thomas; Woodhouse, Paul [Health and Safety Executive - NII, St. Peter' s House, Balliol Road, Bootle, Merseyside L20 3LZ (United Kingdom); Gallo, Robert M. [Special Inspection Branch, US Nuclear Regulatory Commission - US NRC, Mail Stop 0-9A1, Washington, DC 20555 (United States); Campbell, Rob [International Atomic Energy Agency - IAEA, P.O. Box 100, A-1400 Vienna (International Atomic Energy Agency (IAEA))

1997-07-01

The NEA Committee on Nuclear Regulatory Activities (CNRA) believes that an essential factor in ensuring the safety of nuclear installations is the continuing exchange and analysis of technical information and data. To facilitate this exchange the Committee has established Working Groups and Groups of Experts in specialised topics. CNRA believes that safety inspections are a major element in the regulatory authority's efforts to ensure the safe operation of nuclear facilities. Considering the importance of these issues, the Committee has established a special Working Group on Inspection Practices (WGIP). The purpose of WGIP, is to facilitate the exchange of information and experience related to regulatory safety inspections between CNRA Member countries. This was the 3. international workshop held by the WGIP on regulatory inspection activities. The focus of this workshop was on 3 main topics; Inspection Planning, Plant Maintenance and Assessment of Safety. This document presents the proceedings from the workshop, including: workshop programme, results and conclusions, papers and presentations and the list of participants. The main purpose of the Workshop is to provide a forum of exchange of information on the regulatory inspection activities.

78 FR 69078 - Houston Pipe Line Company LP; Notice of Application

Science.gov (United States)

2013-11-18

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. CP14-13-000] Houston Pipe Line Company LP; Notice of Application Take notice that on October 28, 2013, Houston Pipe Line Company LP (HPL), 1300 Main Street, Houston, Texas 77002, filed an application in Docket No. CP14-13-000...

Diagnostic value of CRP and Lp(a) in coronary heart disease.

Science.gov (United States)

Erbağci, Ayşe Binnur; Tarakçioğlu, Mehmet; Aksoy, Mehmet; Kocabaş, Ramazan; Nacak, Muradiye; Aynacioğlu, A Sükrü; Sivrikoz, Cumhur

2002-06-01

Increased lipoprotein (a) [Lp(a)] concentration was reported to be an independent risk factor for coronary heart disease (CHD). Recent epidemiological studies affirmed the value of C-reactive protein (CRP) as the strongest, univariate predictor of the cardiovascular events. We decided to establish cut-off levels providing maximum diagnostic efficiency for CHD. In this study we measured CRP and Lp(a) concentrations in patients with angiographically demonstrated CHD (group A, n: 120), patients without any angiographically demonstrable lesion (group B, n: 62) and a group of healthy subjects (group C, n: 41). Data were evaluated correcting for lipid and lipoprotein concentrations, diabetes mellitus, hypertension, smoking, age, and body mass index in men and women. ROC curve based cut-off values (comparing group A versus groups B and C) and associated diagnostic performances of the assays were evaluated. Significant increases were noted in serum CRP concentrations in men and women, in groups A vs. B,A vs. C, B vs. C. Lp(a) concentrations were not different among groups in men but were higher in group A vs. B and C in women. Optimal cut-off levels for CRP in women and men were found as 2.1 and 3.0 mg/l with the diagnostic values of 0.792 and 0.770, respectively. For Lp(a) optimal cut-off levels were found as 22.6 and 9.8 mg/dl with the diagnostic values of 0.612 and 0.596 in women and men, respectively. The CRP level is quite efficient for separation of patients from controls. Therefore keeping in mind the lack of specificity, the CRP level may be a useful tool in the diagnosis of coronary heart disease. However, the Lp(a) level is not efficient enough to support the use of Lp(a) measurement for management of coronary heart disease.

Results of 8th regular inspection of No.2 plant in Hamaoka Nuclear Power Station, Chubu Electric Power Co., Inc

International Nuclear Information System (INIS)

1989-01-01

The 8th regular inspection of No.2 plant in Hamaoka Nuclear Power Station was carried out from January 23 to June 28, 1988. The parallel operation was resumed on June 13, 1988, 143 days after the parallel off. The facilities to be inspected were the reactor proper, reactor cooling system, measurement and control system, fuel facilities, radiation control facilities, waste facilities, reactor containment installation and emergency power generation system. On these facilities to be inspected, the appearance, disassembling, leak, function, performance and other inspections were carried out, and as the result, abnormality was not found. However, during the preparation for running-in after starting up the reactor, the leak from a steam drain piping was found, therefore it was repaired. The works related to this regular inspection were accomplished within the range of allowable radiation dose based on the relevant laws. The maim reconstruction works carried out during the period of this regular inspection were the replacement of the components of cooling seawater pumps, the repair of a steam drain piping in the high pressure injection system and the replacement of LP turbine rotors. (K.I.)

Analysis of error floor of LDPC codes under LP decoding over the BSC

Energy Technology Data Exchange (ETDEWEB)

Chertkov, Michael [Los Alamos National Laboratory; Chilappagari, Shashi [UNIV OF AZ; Vasic, Bane [UNIV OF AZ; Stepanov, Mikhail [UNIV OF AZ

2009-01-01

We consider linear programming (LP) decoding of a fixed low-density parity-check (LDPC) code over the binary symmetric channel (BSC). The LP decoder fails when it outputs a pseudo-codeword which is not a codeword. We propose an efficient algorithm termed the instanton search algorithm (ISA) which, given a random input, generates a set of flips called the BSC-instanton and prove that: (a) the LP decoder fails for any set of flips with support vector including an instanton; (b) for any input, the algorithm outputs an instanton in the number of steps upper-bounded by twice the number of flips in the input. We obtain the number of unique instantons of different sizes by running the ISA sufficient number of times. We then use the instanton statistics to predict the performance of the LP decoding over the BSC in the error floor region. We also propose an efficient semi-analytical method to predict the performance of LP decoding over a large range of transition probabilities of the BSC.

Plasma Lp-PLA2 mass and apoB-lipoproteins that carry Lp-PLA2 decrease after sodium

NARCIS (Netherlands)

Constantinides, Alexander; Kerstens, Michiel N.; Dikkeschei, Bert D.; van Pelt, L. Joost; Tellis, Constantinos C.; Tselepis, Alexandros D.; Dullaart, Robin P. F.

2012-01-01

Eur J Clin Invest 2012; 42 (11): 12351243 Abstract Background Lipoprotein-associated phospholipase A2 (Lp-PLA2) is a novel cardiovascular risk marker, which is predominantly complexed to apolipoprotein (apo) B-containing lipoproteins in human plasma. As increasing dietary sodium intake may decrease

78 FR 24666 - Updates to the List of Plant Inspection Stations

Science.gov (United States)

2013-04-26

... 319 Coffee, Cotton, Fruits, Imports, Logs, Nursery stock, Plant diseases and pests, Quarantine..., laboratory facilities for pest and disease identification, and in some cases, provide facilities for...) division who inspect articles to ensure they are free of plant pests and diseases and otherwise comply with...

Convex Hypersurfaces and $L^p$ Estimates for Schr\\"odinger Equations

OpenAIRE

Zheng, Quan; Yao, Xiaohua; Fan, Da

2004-01-01

This paper is concerned with Schr\\"odinger equations whose principal operators are homogeneous elliptic. When the corresponding level hypersurface is convex, we show the $L^p$-$L^q$ estimate of solution operator in free case. This estimate, combining with the results of fractionally integrated groups, allows us to further obtain the $L^p$ estimate of solutions for the initial data belonging to a dense subset of $L^p$ in the case of integrable potentials.

The Effects of Linguistic Context on Word Recognition in Noise by Elderly Listeners Using Spanish Sentence Lists (SSL)

Science.gov (United States)

Cervera, Teresa; Rosell, Vicente

2015-01-01

This study evaluated the effects of the linguistic context on the recognition of words in noise in older listeners using the Spanish Sentence Lists. These sentences were developed based on the approach of the SPIN test for the English language, which contains high and low predictability (HP and LP) sentences. In addition, the relative contribution…

Exercise manual for the Augmented Computer Exercise for Inspection Training (ACE-IT) software

Energy Technology Data Exchange (ETDEWEB)

Dobranich, P.R.; Widney, T.W.; Goolsby, P.T. [Sandia National Labs., Albuquerque, NM (United States). Cooperative Monitoring Center and Regional Security; Nelson, J.D.; Evanko, D.A. [Ogden Environmental and Energy Services, Inc., Albuquerque, NM (United States)

1997-09-01

The on-site inspection provisions in many current and proposed arms control agreements require extensive preparation and training on the part of both the Inspected Party and the Inspection Team. Current training techniques include table-top inspections and practice inspections. The Augmented Computer Exercise for Inspection Training (ACE-IT), an interactive computer training tool, increases the utility of table-top inspections. ACE-IT has been designed to provide training for a hypothetical challenge inspection under the Chemical Weapons Convention (CWC); however, this training tool can be modified for other inspection regimes. Although ACE-IT provides training from notification of an inspection through post-inspection activities, the primary emphasis of ACE-IT is in the inspection itself--particularly with the concept of managed access. ACE-IT also demonstrates how inspection provisions impact compliance determination and the protection of sensitive information. The Exercise Manual supplements the ACE-IT software by providing general information on on-site inspections and detailed information for the CWC challenge inspection exercise. The detailed information includes the pre-inspection briefing, maps, list of sensitive items, medical records, and shipping records.

A spinach O-acetylserine(thiollyase homologue, SoCSaseLP, suppresses cysteine biosynthesis catalysed by other enzyme isoforms

Directory of Open Access Journals (Sweden)

Miki Noda

2016-06-01

Full Text Available An enzyme, O-acetylserine(thiollyase (OASTL, also known as O-acetylserine sulfhydrylase or cysteine synthase (CSase, catalyses the incorporation of sulfide into O-acetylserine and produces cysteine. We previously identified a cDNA encoding an OASTL-like protein from Spinacia oleracea, (SoCSaseLP, but a recombinant SoCSaseLP produced in Escherichia coli did not show OASTL activity. The exon-intron structure of the SoCSaseLP gene shared conserved structures with other spinach OASTL genes. The SoCSaseLP and a Beta vulgaris homologue protein, KMT13462, comprise a unique clade in the phylogenetic tree of the OASTL family. Interestingly, when the SoCSaseLP gene was expressed in tobacco plants, total OASTL activity in tobacco leaves was reduced. This reduction in total OASTL activity was most likely caused by interference by SoCSaseLP with cytosolic OASTL. To investigate the possible interaction of SoCSaseLP with a spinach cytosolic OASTL isoform SoCSaseA, a pull-down assay was carried out. The recombinant glutathione S-transferase (GST-SoCSaseLP fusion protein was expressed in E. coli together with the histidine-tagged SoCSaseA protein, and the protein extract was subjected to glutathione affinity chromatography. The histidine-tagged SoCSaseA was co-purified with the GST-SoCSaseLP fusion protein, indicating the binding of SoCSaseLP to SoCSaseA. Consistent with this interaction, the OASTL activity of the co-purified SoCSaseA was reduced compared with the activity of SoCSaseA that was purified on its own. These results strongly suggest that SoCSaseLP negatively regulates the activity of other cytosolic OASTL family members by direct interaction.

LP (a) levels and apo (a) phenotypes in urban black South African ...

African Journals Online (AJOL)

300 U/I), intermediate (300 - 700 UII) and high (> 700 UII) plasma Lp (a) ... Tygerberg Hospital, Tygerberg, W Cape ... up to 200-fold difference in Lp (a) concentrations.' In addition, ethnic .... An interesting observation was the large number of phenotypes, Le. ... sample of black Americans with a high-resolution SOS- agarose ...

LP 543-25: A Rare Low-mass Runaway Disk Star

Science.gov (United States)

de la Fuente Marcos, Raúl; de la Fuente Marcos, Carlos

2018-05-01

LP 543-25 or PSS 544-7 is a high proper-motion star located 458 pc from the Sun in the constellation of Canis Minor; it has been argued that it could be a candidate cannonball star ejected by a star cluster. Here, we revisit the issue of the kinematics of this interesting star using Gaia DR2. The heliocentric Galactic velocity components are (U, V, W) = (206, -289, 30) km/s; the corresponding Galactocentric Galactic velocity components show that LP 543-25 is moving in the Galactic plane and away from the Galactic Center at a rate of nearly 200 km/s, which is compatible with an origin in one of the multiple star clusters that inhabit the inner regions of the Milky Way. LP 543-25 appears to be a member of an elusive class of stars, the low-mass runaway stars. It is perhaps one of the closest and less massive runaway stars identified so far.

65 nm LP/GP mix low cost platform for multi-media wireless and consumer applications

Science.gov (United States)

Tavel, B.; Duriez, B.; Gwoziecki, R.; Basso, M. T.; Julien, C.; Ortolland, C.; Laplanche, Y.; Fox, R.; Sabouret, E.; Detcheverry, C.; Boeuf, F.; Morin, P.; Barge, D.; Bidaud, M.; Biénacel, J.; Garnier, P.; Cooper, K.; Chapon, J. D.; Trouiller, Y.; Belledent, J.; Broekaart, M.; Gouraud, P.; Denais, M.; Huard, V.; Rochereau, K.; Difrenza, R.; Planes, N.; Marin, M.; Boret, S.; Gloria, D.; Vanbergue, S.; Abramowitz, P.; Vishnubhotla, L.; Reber, D.; Stolk, P.; Woo, M.; Arnaud, F.

2006-04-01

A complete 65 nm CMOS platform, called LP/GP Mix, has been developed employing thick oxide transistor (IO), Low Power (LP) and General Purpose (GP) devices on the same chip. Dedicated to wireless multi-media and consumer applications, this new triple gate oxide platform is low cost (+1mask only) and saves over 35% of dynamic power with the use of the low operating voltage GP. The LP/GP mix shows competitive digital performance with a ring oscillator (FO = 1) speed equal to 7 ps per stage (GP) and 6T-SRAM static power lower than 10 pA/cell (LP). Compatible with mixed-signal design requirements, transistors show high voltage gain, low mismatch factor and low flicker noise. Moreover, to address mobile phone demands, excellent RF performance has been achieved with FT = 160 GHz for LP and 280 GHz for GP nMOS transistors.

Capped Lp approximations for the composite L0 regularization problem

OpenAIRE

Li, Qia; Zhang, Na

2017-01-01

The composite L0 function serves as a sparse regularizer in many applications. The algorithmic difficulty caused by the composite L0 regularization (the L0 norm composed with a linear mapping) is usually bypassed through approximating the L0 norm. We consider in this paper capped Lp approximations with $p>0$ for the composite L0 regularization problem. For each $p>0$, the capped Lp function converges to the L0 norm pointwisely as the approximation parameter tends to infinity. We point out tha...

49 CFR 213.333 - Automated vehicle inspection systems.

Science.gov (United States)

2010-10-01

... applied (pounds). c = Coefficient of friction between rail/tie which is assigned a nominal value of (0.4... hours of the inspection, output reports that— (1) Provide a continuous plot, on a constant-distance axis... exception report containing a systematic listing of all track geometry conditions which constitute an...

Survival associated pathway identification with group Lp penalized global AUC maximization

Directory of Open Access Journals (Sweden)

Liu Zhenqiu

2010-08-01

Full Text Available Abstract It has been demonstrated that genes in a cell do not act independently. They interact with one another to complete certain biological processes or to implement certain molecular functions. How to incorporate biological pathways or functional groups into the model and identify survival associated gene pathways is still a challenging problem. In this paper, we propose a novel iterative gradient based method for survival analysis with group Lp penalized global AUC summary maximization. Unlike LASSO, Lp (p 1. We first extend Lp for individual gene identification to group Lp penalty for pathway selection, and then develop a novel iterative gradient algorithm for penalized global AUC summary maximization (IGGAUCS. This method incorporates the genetic pathways into global AUC summary maximization and identifies survival associated pathways instead of individual genes. The tuning parameters are determined using 10-fold cross validation with training data only. The prediction performance is evaluated using test data. We apply the proposed method to survival outcome analysis with gene expression profile and identify multiple pathways simultaneously. Experimental results with simulation and gene expression data demonstrate that the proposed procedures can be used for identifying important biological pathways that are related to survival phenotype and for building a parsimonious model for predicting the survival times.

Final Report Inspection of Aged/Degraded Containments Program.

Energy Technology Data Exchange (ETDEWEB)

Naus, Dan J [ORNL; Ellingwood, B R [Georgia Institute of Technology; Oland, C Barry [ORNL

2005-09-01

The Inspection of Aged/Degraded Containments Program had primary objectives of (1) understanding the significant factors relating corrosion occurrence, efficacy of inspection, and structural capacity reduction of steel containments and liners of reinforced concrete containments; (2) providing the United States Nuclear Regulatory Commission (USNRC) reviewers a means of establishing current structural capacity margins or estimating future residual structural capacity margins for steel containments, and concrete containments as limited by liner integrity; (3) providing recommendations, as appropriate, on information to be requested of licensees for guidance that could be utilized by USNRC reviewers in assessing the seriousness of reported incidences of containment degradation; and (4) providing technical assistance to the USNRC (as requested) related to concrete technology. Primary program accomplishments have included development of a degradation assessment methodology; reviews of techniques and methods for inspection and repair of containment metallic pressure boundaries; evaluation of high-frequency acoustic imaging, magnetostrictive sensor, electromagnetic acoustic transducer, and multimode guided plate wave technologies for inspection of inaccessible regions of containment metallic pressure boundaries; development of a continuum damage mechanics-based approach for structural deterioration; establishment of a methodology for reliability-based condition assessments of steel containments and liners; and fragility assessments of steel containments with localized corrosion. In addition, data and information assembled under this program has been transferred to the technical community through review meetings and briefings, national and international conference participation, technical committee involvement, and publications of reports and journal articles. Appendix A provides a listing of program reports, papers, and publications; and Appendix B contains a listing of

State of the Art in LP-WAN Solutions for Industrial IoT Services.

Science.gov (United States)

Sanchez-Iborra, Ramon; Cano, Maria-Dolores

2016-05-17

The emergence of low-cost connected devices is enabling a new wave of sensorization services. These services can be highly leveraged in industrial applications. However, the technologies employed so far for managing this kind of system do not fully cover the strict requirements of industrial networks, especially those regarding energy efficiency. In this article a novel paradigm, called Low-Power Wide Area Networking (LP-WAN), is explored. By means of a cellular-type architecture, LP-WAN-based solutions aim at fulfilling the reliability and efficiency challenges posed by long-term industrial networks. Thus, the most prominent LP-WAN solutions are reviewed, identifying and discussing the pros and cons of each of them. The focus is also on examining the current deployment state of these platforms in Spain. Although LP-WAN systems are at early stages of development, they represent a promising alternative for boosting future industrial IIoT (Industrial Internet of Things) networks and services.

State of the Art in LP-WAN Solutions for Industrial IoT Services

Directory of Open Access Journals (Sweden)

Ramon Sanchez-Iborra

2016-05-01

Full Text Available The emergence of low-cost connected devices is enabling a new wave of sensorization services. These services can be highly leveraged in industrial applications. However, the technologies employed so far for managing this kind of system do not fully cover the strict requirements of industrial networks, especially those regarding energy efficiency. In this article a novel paradigm, called Low-Power Wide Area Networking (LP-WAN, is explored. By means of a cellular-type architecture, LP-WAN–based solutions aim at fulfilling the reliability and efficiency challenges posed by long-term industrial networks. Thus, the most prominent LP-WAN solutions are reviewed, identifying and discussing the pros and cons of each of them. The focus is also on examining the current deployment state of these platforms in Spain. Although LP-WAN systems are at early stages of development, they represent a promising alternative for boosting future industrial IIoT (Industrial Internet of Things networks and services.

Guidance for performing site inspections under CERCLA

Energy Technology Data Exchange (ETDEWEB)

1992-09-01

This guidance presents EPA`s site inspection (SI) strategy. The strategy discusses procedural guidelines to investigate potential Superfund (CERCLA) sites for evaluation pursuant to the Hazard Ranking System (HRS), revised in accordance with the Superfund Amendments and Reauthorization Act of 1986. The HRS is the primary means by which EPA evaluates sites for superfund`s National Priorities List (NPL).

Circulating and PBMC Lp-PLA2 associate differently with oxidative stress and subclinical inflammation in nonobese women (menopausal status.

Directory of Open Access Journals (Sweden)

Jean Kyung Paik

Full Text Available BACKGROUND: This study aimed to determine the association of lipoprotein-associated phospholipase A(2 (Lp-PLA(2 activity in circulation and peripheral blood mononuclear cells (PBMCs with inflammatory and oxidative stress markers in nonobese women and according to menopausal status. Lp-PLA(2 activity, a marker for cardiovascular risk is associated with inflammation and oxidative stress. METHODOLOGY/PRINCIPAL FINDINGS: Eighty postmenopausal women (53.0±4.05 yr and 96 premenopausal women (39.7±9.25 yr participated in this study. Lp-PLA(2 activities, interleukin (IL-6, tumor necrosis factor (TNF-α, and IL-1β in plasma as well as in PBMCs were measured. Plasma ox-LDL was also measured. Postmenopausal women demonstrated higher circulating levels of ox-LDL and IL-6, as well as IL-6, TNF-α, and IL-1β in PBMCs, than premenopausal women. In both groups, plasma Lp-PLA(2 activity positively correlated with Lp-PLA(2 activity in PBMCs and plasma ox-LDL. In premenopausal women, Lp-PLA(2 activities in plasma and PBMCs positively correlated with IL-6, TNF-α, and IL-1β in PBMCs. In postmenopausal women, plasma ox-LDL positively correlated with PBMC cytokine production. In subgroup analysis of postmenopausal women according to plasma ox-LDL level (median level: 48.715 U/L, a significant increase in Lp-PLA(2 activity in the plasma but not the PBMCs was found in the high ox-LDL subgroup. Plasma Lp-PLA(2 activity positively correlated with unstimulated PBMC Lp-PLA(2 activity in the low ox-LDL subgroup (r = 0.627, P<0.001, whereas in the high ox-LDL circulating Lp-PLA(2 activity positively correlated with plasma ox-LDL (r = 0.390, P = 0.014 but not with Lp-PLA(2 activity in PBMCs. CONCLUSIONS/SIGNIFICANCE: The lack of relation between circulating Lp-PLA(2 activity and Lp-PLA(2 activity in PBMCs was found in postmenopausal women with high ox-LDL. This may indicate other sources of circulating Lp-PLA(2 activity except PBMC in postmenopausal women

An LP-based heuristic for the fixed charge transportation problem

DEFF Research Database (Denmark)

Klose, Andreas

2007-01-01

The fixed charge transportation problem consists in finding a minimum cost network flow from a set of suppliers to a set of customers. Beside costs proportional to quantities transported, transportation costs also include a fixed charge. The paper describes a linear programming based heuristic...... approach for computing lower and upper bounds on the minimal cost. To this end, the LP relaxation is iteratively strengthened by means of adding cuts; in each iteration the current LP solution is then used to guide a local search heuristic. In addition to standard polyhedral cuts as lifted cover...

78 FR 62614 - Guttman Energy, Inc., PBF Holding Company LLC v. Buckeye Pipe Line Company, L.P., Laurel Pipe...

Science.gov (United States)

2013-10-22

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. OR14-4-000] Guttman Energy, Inc., PBF Holding Company LLC v. Buckeye Pipe Line Company, L.P., Laurel Pipe Line Company, L.P... complaint against Buckeye Pipe Line Company L.P. and Laurel Pipe Line Company L.P. (Respondents) challenging...

Examples of in-service inspections and typical maintenance schedule for low-power research reactors

International Nuclear Information System (INIS)

Boeck, H.

1997-01-01

In-service inspection methods for low-power research reactors are described which have been developed during the past 37 years of the operation of the TRIGA reactor Vienna. Special tools have been developed during this period and their application for maintenance and in-serve inspection is discussed. Two practical in-service inspections at a TRIGA reactor and at a MTR reactor are presented. Further a typical maintenance plan for a TRIGA reactor is listed in the annex. (author)

Condition Assessment Survey (CAS) Program. Deficiency standards and inspections methods manual: Volume 7, 0.07 Conveying

Energy Technology Data Exchange (ETDEWEB)

1993-05-01

System information is given for asset determinant factor/CAS repair codes/CAS cost factors; guide sheet tool & material listing; testing methods; inspection frequency; standard system design life tables; and system work breakdown structure. Deficiency standards and inspection methods are presented for elevators and special conveyors.

76 FR 29234 - Texas Eastern Transmission, LP; Notice of Request Under Blanket Authorization

Science.gov (United States)

2011-05-20

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. CP11-477-000] Texas Eastern Transmission, LP; Notice of Request Under Blanket Authorization Take notice that on May 10, 2011 Texas Eastern Transmission, LP (Texas Eastern), 5400 Westheimer Court, Houston, Texas 77056, filed in Docket No. CP11-477-000...

77 FR 64767 - Airworthiness Directives; Gulfstream Aerospace LP (Type Certificate Previously Held by Israel...

Science.gov (United States)

2012-10-23

... Aerospace LP (Type Certificate Previously Held by Israel Aircraft Industries, Ltd.) Airplanes AGENCY... airworthiness directive (AD) for certain Gulfstream Aerospace LP (Type Certificate previously held by Israel... Certificate previously held by Israel Aircraft Industries, Ltd.) Model Galaxy and Gulfstream 200 airplanes...

78 FR 47546 - Airworthiness Directives; Gulfstream Aerospace LP (Type Certificate Previously Held by Israel...

Science.gov (United States)

2013-08-06

... Airworthiness Directives; Gulfstream Aerospace LP (Type Certificate Previously Held by Israel Aircraft... Gulfstream Aerospace LP (Type Certificate Previously Held by Israel Aircraft Industries, Ltd.) Model... Aviation Authority of Israel (CAAI), which is the aviation authority for Israel, has issued Israeli...

Single-nucleotide polymorphisms in LPA explain most of the ancestry-specific variation in Lp(a levels in African Americans.

Directory of Open Access Journals (Sweden)

Rahul C Deo

2011-01-01

Full Text Available Lipoprotein(a (Lp(a is an important causal cardiovascular risk factor, with serum Lp(a levels predicting atherosclerotic heart disease and genetic determinants of Lp(a levels showing association with myocardial infarction. Lp(a levels vary widely between populations, with African-derived populations having nearly 2-fold higher Lp(a levels than European Americans. We investigated the genetic basis of this difference in 4464 African Americans from the Jackson Heart Study (JHS using a panel of up to 1447 ancestry informative markers, allowing us to accurately estimate the African ancestry proportion of each individual at each position in the genome. In an unbiased genome-wide admixture scan for frequency-differentiated genetic determinants of Lp(a level, we found a convincing peak (LOD = 13.6 at 6q25.3, which spans the LPA locus. Dense fine-mapping of the LPA locus identified a number of strongly associated, common biallelic SNPs, a subset of which can account for up to 7% of the variation in Lp(a level, as well as >70% of the African-European population differences in Lp(a level. We replicated the association of the most strongly associated SNP, rs9457951 (p = 6 × 10(-22, 27% change in Lp(a per allele, ∼5% of Lp(a variance explained in JHS, in 1,726 African Americans from the Dallas Heart Study and found an even stronger association after adjustment for the kringle(IV repeat copy number. Despite the strong association with Lp(a levels, we find no association of any LPA SNP with incident coronary heart disease in 3,225 African Americans from the Atherosclerosis Risk in Communities Study.

75 FR 28485 - Airworthiness Directives; Gulfstream Aerospace LP (Type Certificate Previously Held by Israel...

Science.gov (United States)

2010-05-21

... Airworthiness Directives; Gulfstream Aerospace LP (Type Certificate Previously Held by Israel Aircraft... Gulfstream Aerospace LP (Type Certificate Previously Held by Israel Aircraft Industries, Ltd.): Amendment 39... previously held by Israel Aircraft Industries, Ltd.) Model Gulfstream 100 airplanes; and Model Astra SPX and...

Smell of danger: an analysis of LP-gas odorization

Energy Technology Data Exchange (ETDEWEB)

Cain, W.S.; Turk, A.

1985-03-01

LP-gas derives warning properties from the odorants ethyl mercaptan or thiophane. Laboratory tests have implied that the average person has the ability to smell the odors before leaking LP-gas reaches one-fifth its lower limit of flammability. Generally, however, laboratory tests ignore or discard persons with a poor sense of smell, especially the elderly and persons with certain types of hyposmia. Some persons who apparently can smell the warning agents when directed may otherwise fail to notice or identify them. Elderly men seem particularly vulnerable to instances of incidental anosmia and olfactory agnosia. Psychophysical testing of the warning agents has been rather unsophisticated. There exists neither a standard protocol for testing nor adequate specification of the perceptual properties that might make one warning agent better than another. Without such developments, improvement in warning agents will fail to occur. Possible improvements include increases in concentration, the use of blends to insure more uniform delivery of agent and, to decrease the perceptual vulnerability of relatively insensitive people, use of agents with favorable psychophysical (stimulus-response) functions and use of agents with favorable adaptation characteristics. Even without a change in existing products, it seems advisable to learn more about the vulnerability of LP-gas users and to employ educational means to reduce risks.

Comparative genome analysis of Lactobacillus plantarum GB-LP3 provides candidates of survival-related genetic factors.

Science.gov (United States)

Jeon, Soomin; Jung, Jaehoon; Kim, Kwondo; Yoo, DongAhn; Lee, Chanho; Kang, Jungsun; Cho, Kyungjin; Kang, Dae-Kyung; Kwak, Woori; Yoon, Sook Hee; Kim, Heebal; Cho, Seoae

2017-09-01

Lactobacillus plantarum is found in various environmental niches such as in the gastrointestinal tract of an animal host or a fermented food. This species isolated from a certain environment is known to possess a variety of properties according to inhabited environment's adaptation. However, a causal relationship of a genetic factor and phenotype affected by a specific environment has not been systematically comprehended. L. plantarum GB-LP3 strain was isolated from Korean traditional fermented vegetable and the whole genome of GB-LP3 was sequenced. Comparative genome analysis of GB-LP3, with other 14 L. plantarum strains, was conducted. In addition, genomic island regions were investigated. The assembled whole GB-LP3 genome contained a single circular chromosome of 3,206,111bp with the GC content of 44.7%. In the phylogenetic tree analysis, GB-LP3 was in the closest distance from ZJ316. The genomes of GB-LP3 and ZJ316 have the high level of synteny. Functional genes that are related to prophage, bacteriocin, and quorum sensing were found through comparative genomic analysis with ZJ316 and investigation of genomic islands. dN/dS analysis identified that the gene coding for phosphonate ABC transporter ATP-binding protein is evolutionarily accelerated in GB-LP3. Our study found that potential candidate genes that are affected by environmental adaptation in Korea traditional fermented vegetable. Copyright © 2017. Published by Elsevier B.V.

A new LP formulation of the admission control problem modelled as an MDP under average reward criterion

Science.gov (United States)

Pietrabissa, Antonio

2011-12-01

The admission control problem can be modelled as a Markov decision process (MDP) under the average cost criterion and formulated as a linear programming (LP) problem. The LP formulation is attractive in the present and future communication networks, which support an increasing number of classes of service, since it can be used to explicitly control class-level requirements, such as class blocking probabilities. On the other hand, the LP formulation suffers from scalability problems as the number C of classes increases. This article proposes a new LP formulation, which, even if it does not introduce any approximation, is much more scalable: the problem size reduction with respect to the standard LP formulation is O((C + 1)2/2 C ). Theoretical and numerical simulation results prove the effectiveness of the proposed approach.

Long Period (LP) volcanic earthquake source location at Merapi volcano by using dense array technics

Science.gov (United States)

Metaxian, Jean Philippe; Budi Santoso, Agus; Laurin, Antoine; Subandriyo, Subandriyo; Widyoyudo, Wiku; Arshab, Ghofar

2015-04-01

Since 2010, Merapi shows unusual activity compared to last decades. Powerful phreatic explosions are observed; some of them are preceded by LP signals. In the literature, LP seismicity is thought to be originated within the fluid, and therefore to be representative of the pressurization state of the volcano plumbing system. Another model suggests that LP events are caused by slow, quasi-brittle, low stress-drop failure driven by transient upper-edifice deformations. Knowledge of the spatial distribution of LP events is fundamental for better understanding the physical processes occurring in the conduit, as well as for the monitoring and the improvement of eruption forecasting. LP events recorded at Merapi have a spectral content dominated by frequencies between 0.8 and 3 Hz. To locate the source of these events, we installed a seismic antenna composed of 4 broadband CMG-6TD Güralp stations. This network has an aperture of 300 m. It is located on the site of Pasarbubar, between 500 and 800 m from the crater rim. Two multi-parameter stations (seismic, tiltmeter, S-P) located in the same area, equipped with broadband CMG-40T Güralp sensors may also be used to complete the data of the antenna. The source of LP events is located by using different approaches. In the first one, we used a method based on the measurement of the time delays between the early beginnings of LP events for each array receiver. The observed differences of time delays obtained for each pair of receivers are compared to theoretical values calculated from the travel times computed between grid nodes, which are positioned in the structure, and each receiver. In a second approach, we estimate the slowness vector by using MUSIC algorithm applied to 3-components data. From the slowness vector, we deduce the back-azimuth and the incident angle, which give an estimation of LP source depth in the conduit. This work is part of the Domerapi project funded by French Agence Nationale de la Recherche (https

77 FR 44113 - Airworthiness Directives; Gulfstream Aerospace LP (Type Certificate Previously Held by Israel...

Science.gov (United States)

2012-07-27

... Airworthiness Directives; Gulfstream Aerospace LP (Type Certificate Previously Held by Israel Aircraft... Aerospace LP (Type Certificate previously held by Israel Aircraft Industries, Ltd.) Model Gulfstream G150... to the manufacturer. This action was prompted by a report from the Civil Aviation Authority of Israel...

Lr-Lp Stability of the Incompressible Flows with Nonzero Far-Field Velocity

Directory of Open Access Journals (Sweden)

Jaiok Roh

2011-01-01

Full Text Available We consider the stability of stationary solutions w for the exterior Navier-Stokes flows with a nonzero constant velocity u∞ at infinity. For u∞=0 with nonzero stationary solution w, Chen (1993, Kozono and Ogawa (1994, and Borchers and Miyakawa (1995 have studied the temporal stability in Lp spaces for 11 and obtain Lr-Lp stability as Kozono and Ogawa and Borchers and Miyakawa obtained for u∞=0.

75 FR 8921 - Grant of Authority for Subzone Status; Brightpoint North America L.P. (Cell Phone Kitting and...

Science.gov (United States)

2010-02-26

... Status; Brightpoint North America L.P. (Cell Phone Kitting and Distribution) Indianapolis, IN Pursuant to... the cell phone kitting and distribution facilities of Brightpoint North America L.P., located in... cell phones at the facilities of Brightpoint North America L.P., located in Plainfield, Indiana...

ChLpMab-23: Cancer-Specific Human-Mouse Chimeric Anti-Podoplanin Antibody Exhibits Antitumor Activity via Antibody-Dependent Cellular Cytotoxicity.

Science.gov (United States)

Kaneko, Mika K; Nakamura, Takuro; Kunita, Akiko; Fukayama, Masashi; Abe, Shinji; Nishioka, Yasuhiko; Yamada, Shinji; Yanaka, Miyuki; Saidoh, Noriko; Yoshida, Kanae; Fujii, Yuki; Ogasawara, Satoshi; Kato, Yukinari

2017-06-01

Podoplanin is expressed in many cancers, including oral cancers and brain tumors. The interaction between podoplanin and its receptor C-type lectin-like receptor 2 (CLEC-2) has been reported to be involved in cancer metastasis and tumor malignancy. We previously established many monoclonal antibodies (mAbs) against human podoplanin using the cancer-specific mAb (CasMab) technology. LpMab-23 (IgG 1 , kappa), one of the mouse anti-podoplanin mAbs, was shown to be a CasMab. However, we have not shown the usefulness of LpMab-23 for antibody therapy against podoplanin-expressing cancers. In this study, we first determined the minimum epitope of LpMab-23 and revealed that Gly54-Leu64 peptide, especially Gly54, Thr55, Ser56, Glu57, Asp58, Arg59, Tyr60, and Leu64 of podoplanin, is a critical epitope of LpMab-23. We further produced human-mouse chimeric LpMab-23 (chLpMab-23) and investigated whether chLpMab-23 exerts antibody-dependent cellular cytotoxicity (ADCC) and antitumor activity. In flow cytometry, chLpMab-23 showed high sensitivity against a podoplanin-expressing glioblastoma cell line, LN319, and an oral cancer cell line, HSC-2. chLpMab-23 also showed ADCC activity against podoplanin-expressing CHO cells (CHO/podoplanin). In xenograft models with HSC-2 and CHO/podoplanin, chLpMab-23 exerts antitumor activity using human natural killer cells, indicating that chLpMab-23 could be useful for antibody therapy against podoplanin-expressing cancers.

Estimating the Population Impact of Lp(a) Lowering on the Incidence of Myocardial Infarction and Aortic Stenosis

DEFF Research Database (Denmark)

Afshar, Mehdi; Kamstrup, Pia R; Williams, Ken

2016-01-01

OBJECTIVE: High lipoprotein(a) (Lp[a]) is the most common genetic dyslipidemia and is a causal factor for myocardial infarction (MI) and aortic stenosis (AS). We sought to estimate the population impact of Lp(a) lowering that could be achieved in primary prevention using the therapies in developm......OBJECTIVE: High lipoprotein(a) (Lp[a]) is the most common genetic dyslipidemia and is a causal factor for myocardial infarction (MI) and aortic stenosis (AS). We sought to estimate the population impact of Lp(a) lowering that could be achieved in primary prevention using the therapies...... as measures of the population impact. For MI, the event rate was 4.0% versus 2.8% for high versus low Lp(a) (relative risk, 1.46; 95% confidence interval [CI], 1.45-1.46). The attributable risk was 1.26% (95% CI, 1.24-1.27), corresponding to 31.3% (95% CI, 31.0-31.7) of the excess MI risk in those with high...... and 7.8% for AS. CONCLUSIONS: Lp(a) lowering among the top 20% of the population distribution for Lp(a) could prevent 1 in 14 cases of MI and 1 in 7 cases of AS, suggesting a major impact on reducing the burden of cardiovascular disease. Targeting the top 10% could prevent 1 in 20 MI cases and 1 in 12...

78 FR 11639 - Houston Pipe Line Company LP; Notice of Petition for Rate Approval

Science.gov (United States)

2013-02-19

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. PR13-31-000] Houston Pipe Line Company LP; Notice of Petition for Rate Approval Take notice that on February 1, 2013, Houston Pipe Line Company LP (HPL) filed for approval of rates for transportation service pursuant to section...

TRAC-PF1 code assessment using OECD LOFT LP-FP-1 experiment

International Nuclear Information System (INIS)

Barbero, F.J.

1992-04-01

This report assesses thermal-hydraulic aspects of LOFT LP-FP-1 experiment making use of TRAC-PF1/MOD1. LP-FP-1 experiment studies the system thermal-hydraulic and core thermal response for initial and boundary conditions similar to a large-break design basis LOCA leading to fission product release from the fuel cladding gap region. It also assesses the fission product retention effectiveness of the PWR-ECCS in best estimate conditions

THE RUNAWAY WHITE DWARF LP400-22 HAS A COMPANION

International Nuclear Information System (INIS)

Kilic, Mukremin; Brown, Warren R.; Kenyon, S. J.; Allende Prieto, Carlos; Swift, B.; Liebert, J.; Agueeros, M. A.

2009-01-01

We report the detection of a radial velocity companion to the extremely low-mass white dwarf (WD) LP400-22. The radial velocity of the WD shows variations with a semiamplitude of 119 km s -1 and a 0.98776 day period, which implies a companion mass of M ≥ 0.37 M sun . The optical photometry rules out a main-sequence companion. Thus the invisible companion is another WD or a neutron star. Using proper-motion measurements and the radial velocity of the binary system, we find that it has an unusual Galactic orbit. LP400-22 is moving away from the Galactic center with a velocity of 396 ± 43 km s -1 , which is very difficult to explain by supernova runaway ejection mechanisms. Dynamical interactions with a massive black hole like that in the Galactic center can in principle explain its peculiar velocity, if the progenitor was a triple star system comprised of a close binary and a distant tertiary companion. Until better proper motions become available, we consider LP400-22 to be most likely a halo star with a very unusual orbit.

LP-tee pikeneb Tartust Pärnuni / Sirje Pärismaa

Index Scriptorium Estoniae

Pärismaa, Sirje, 1958-

2015-01-01

Norrast pärit tõenduspõhist koostöökultuuri arendava LP-mudeliga (learning environment and pedagogical analysis) on liitumas seitse kooli Pärnust, Viljandist, Puhjast, Tartust ning kolm lasteaeda

Inspection of the Armed Forces Retirement Home

Science.gov (United States)

2014-07-23

or items on the do not buy list. However, after reviewing the purchase card and convenience check transaction logs, the DoD IG Inspection Team...Contract Management Overall Assesment Since 2004, AFRH and the Treasury Franchise Fund’s BPD Administrative Resource Center have been partnered by an...Abbreviations FISMA Federal Information Security Management Act FLRB Franchise Labor and Relations Branch GAO Government Accountability Office GSA General

21 CFR 207.37 - Inspection of registrations and drug listings.

Science.gov (United States)

2010-04-01

... Management Team (HFD-095), Office of Information Technology, Center for Drug Evaluation and Research, Food...) Information that has become a matter of public knowledge. (x) A list of drug products containing a particular... the information will be available for public disclosure if it has become a matter of public knowledge...

75 FR 14644 - Gemini Investors IV, L.P., Notice Seeking Exemption Under Section 312 of the Small Business...

Science.gov (United States)

2010-03-26

... SMALL BUSINESS ADMINISTRATION [License No. 01/01-0410] Gemini Investors IV, L.P., Notice Seeking... given that Gemini Investors IV, L.P., 20 William Street, Wellesley, MA 02481, a Federal Licensee under... Regulations (13 CFR 107.730). Gemini Investors IV, L.P. proposes to provide equity and debt financing to...

Auxiliary feedwater system risk-based inspection guide for the North Anna nuclear power plants

International Nuclear Information System (INIS)

Nickolaus, J.R.; Moffitt, N.E.; Gore, B.F.; Vo, T.V.

1992-10-01

In a study sponsored by the US Nuclear regulatory Commission (NRC), Pacific Northwest Laboratory has developed and applied a methodology for deriving plant-specific risk-based inspection guidance for the auxiliary feedwater (AFW) system at pressurized water reactors that have not undergone probabilistic risk assessment (PRA). This methodology uses existing PRA results and plant operating experience information. Existing PRA-based inspection guidance information recently developed for the NRC for various plants was used to identify generic component failure modes. This information was then combined with plant-specific and industry-wide component information and failure data to identify failure modes and failure mechanisms for the AFW system at the selected plants. North Anna was selected as a plant for study. The product of this effort is a prioritized listing of AFW failures which have occurred at the plant and at other PWRs. This listing is intended for use by the NRC inspectors in preparation of inspection plans addressing AFW risk important components at the North Anna plant

Lithium in LP944-20

Science.gov (United States)

Pavlenko, Ya. V.; Jones, H. R. A.; Martín, E. L.; Guenther, E.; Kenworthy, M. A.; Zapatero Osorio, M. R.

2007-09-01

We present a new estimate of the lithium abundance in the atmosphere of the brown dwarf LP944-20. Our analysis is based on a self-consistent analysis of low-, intermediate- and high-resolution optical and near-infrared spectra. We obtain logN(Li) = 3.25 +/- 0.25 using fits of our synthetic spectra to the LiI resonance line doublet profiles observed with Very Large Telescope/Ultraviolet-Visual Echelle Spectrograph (VLT/UVES) and Anglo-Australian Telescope/Segmented Pupil/Image Reformatting Array of Lenslets (AAT/SPIRAL). This lithium abundance is over two orders of magnitude larger than previous estimates in the literature. In order to obtain good fits of the resonance lines of KI and RbI and better fits to the TiO molecular absorption around the LiI resonance line, we invoke a semi-empirical model atmosphere with the dusty clouds located above the photosphere. The lithium abundance, however, is not changed by the effects of the dusty clouds. We discuss the implications of our estimate of the lithium abundance in LP944-20 for the understanding of the properties of this benchmark brown dwarf. Based on observations obtained on the European Southern Observatory at Cerro Paranal, Chile, in programs 68.C-0063(A) and 072.C-0110(B), the Anglo-Australian Telescope at Siding Springs Observatory during commissioning observations for SPIRAL (Segmented Pupil/Image Reformatting Array of Lenslets) instrument and the Keck Observatory in Mauna Kea, Hawaii. E-mail: yp@mao.kiev.ua

76 FR 41041 - Special Conditions: Gulfstream Aerospace LP (GALP) Model G250 Airplane, Interaction of Systems...

Science.gov (United States)

2011-07-13

... Conditions No. 25-439-SC] Special Conditions: Gulfstream Aerospace LP (GALP) Model G250 Airplane, Interaction... special conditions are issued for the Gulfstream Aerospace LP (GALP) Model G250 airplane. This airplane...

The lysine-peptoid hybrid LP5 maintain activity under physiological conditions and affects virulence gene expression in Staphylococcus aureus

DEFF Research Database (Denmark)

Gottschalk, Sanne; Ingmer, Hanne; Thomsen, Line E.

2016-01-01

The antimicrobial peptide, LP5, is a lysine-peptoid hybrid, with antimicrobial activity against clinically relevant bacteria. Here, we investigated how various environmental conditions affect the antimicrobial activity of LP5 against Staphylococcus aureus (S. aureus). We found that LP5 maintained...

Statistical Review of Global LP Gas 2002

International Nuclear Information System (INIS)

2002-01-01

This review provides essential production and consumption data from 1991 through 2001. A detailed breakdown of supply and sector demand is given for the year 2001 and historic data on international trade, shipping and pricing is also shown. Statistics pertaining to auto-gas are also included in this edition of Statistical Review of Global LP Gas 2001. (author)

Statistical review of global LP gas 2001

International Nuclear Information System (INIS)

2001-01-01

This review provides essential production and consumption data from 1990 through 2000. A more detailed breakdown of supply and sector demand is given for the year 2000 and historic data on international trade, shipping and pricing is also shown. Statistics pertaining to auto-gas are also included in this edition of Statistical Review of Global LP Gas 2001. (author)

Novel Monoclonal Antibody LpMab-17 Developed by CasMab Technology Distinguishes Human Podoplanin from Monkey Podoplanin.

Science.gov (United States)

Kato, Yukinari; Ogasawara, Satoshi; Oki, Hiroharu; Honma, Ryusuke; Takagi, Michiaki; Fujii, Yuki; Nakamura, Takuro; Saidoh, Noriko; Kanno, Hazuki; Umetsu, Mitsuo; Kamata, Satoshi; Kubo, Hiroshi; Yamada, Mitsuhiro; Sawa, Yoshihiko; Morita, Kei-Ichi; Harada, Hiroyuki; Suzuki, Hiroyoshi; Kaneko, Mika Kato

2016-04-01

Podoplanin (PDPN) is a type-I transmembrane sialoglycoprotein, which possesses a platelet aggregation-stimulating (PLAG) domain in its N-terminus. Among the three PLAG domains, O-glycan on Thr52 of PLAG3 is critical for the binding with C-type lectin-like receptor-2 (CLEC-2) and is essential for platelet-aggregating activity of PDPN. Although many anti-PDPN monoclonal antibodies (mAbs) have been established, almost all mAbs bind to PLAG domains. We recently established CasMab technology to produce mAbs against membranous proteins. Using CasMab technology, we produced a novel anti-PDPN mAb, LpMab-17, which binds to non-PLAG domains. LpMab-17 clearly detected endogenous PDPN of cancer cells and normal cells in Western-blot, flow cytometry, and immunohistochemistry. LpMab-17 recognized glycan-deficient PDPN in flow cytometry, indicating that the interaction between LpMab-17 and PDPN is independent of its glycosylation. The minimum epitope of LpMab-17 was identified as Gly77-Asp82 of PDPN using enzyme-linked immunosorbent assay. Of interest, LpMab-17 did not bind to monkey PDPN, whereas the homology is 94% between human PDPN and monkey PDPN, indicating that the epitope of LpMab-17 is unique compared with the other anti-PDPN mAbs. The combination of different epitope-possessing mAbs could be advantageous for the PDPN-targeting diagnosis or therapy.

75 FR 51451 - Erie Boulevard Hydropower, L.P.; Notice of Intent To File License Application, Filing of Pre...

Science.gov (United States)

2010-08-20

... Hydropower, L.P.; Notice of Intent To File License Application, Filing of Pre-Application Document, and.... Project No.: 7320-040. c. Dated Filed: June 29, 2010. d. Submitted By: Erie Boulevard Hydropower, L.P. e...: John Mudre at (202) 502-8902; or e-mail at [email protected] . j. Erie Boulevard Hydropower, L.P...

Condition Assessment Survey (CAS) Program. Deficiency standards and inspections methods manual: Volume 2, 0.02 Substructure

Energy Technology Data Exchange (ETDEWEB)

1993-05-01

System information is given for asset determinant factor/CAS repair codes/CAS cost factors; guide sheet tool & material listing; testing methods; inspection frequency; standard system design life tables; system work breakdown structure; and general system/material data. System assembly/component deficiencies and inspection methods are given for slabs-on-grade, columns, and column fireproofing.

Poly-(R)-3-hydroxybutyrates (PHB) are Atherogenic Components of Lipoprotein Lp(a).

Science.gov (United States)

Reusch, Rosetta N

2015-12-01

The hypothesis is that poly-(R)-3-hydroxybutyrates (PHB), linear polymers of the ketone body, R-3-hydroxybutyrate (R-3HB), are atherogenic components of lipoprotein Lp(a). PHB are universal constituents of biological cells and are thus components of all foods. Medium chain-length PHB (PHB (PHB are highly insoluble in water, but soluble in lipids in which they exhibit a high intrinsic viscosity. They have a higher density than other cellular lipids and they are very adhesive, i.e. they engage in multiple noncovalent interactions with other molecules and salts via hydrogen, hydrophobic and coordinate bonds, thus producing insoluble deposits. Following digestive processes, PHB enter the circulation in chylomicrons and very low density lipoproteins (VLDL). The majority of the PHB (>70%) are absorbed by albumin, which transports them to the liver for disposal. When the amount of PHB in the diet exceed the capacity of albumin to safely remove them from the circulation, the excess PHB remain in the lipid core of LDL particles that become constituents of lipoprotein Lp(a), and contribute to the formation of arterial deposits. In summary, the presence of PHB – water-insoluble, dense, viscous, adhesive polymers – in the lipid cores of the LDL moieties of Lp(a) particles supports the hypothesis that PHB are atherogenic components of Lp(a).

Auxiliary feedwater system risk-based inspection guide for the Ginna Nuclear Power Plant

International Nuclear Information System (INIS)

Pugh, R.; Gore, B.F.; Vo, T.V.; Moffitt, N.E.

1991-09-01

In a study sponsored by the US Nuclear Regulatory Commission (NRC), Pacific Northwest Laboratory has developed and applied a methodology for deriving plant-specific risk-based inspection guidance for the auxiliary feedwater (AFW) system at pressurized water reactors that have not undergone probabilistic risk assessment (PRA). This methodology uses existing PRA results and plant operating experience information. Existing PRA-based inspection guidance information recently developed for the NRC for various plants was used to identify generic component failure modes. This information was then combined with plant-specific and industry-wide component information and failure data to identify failure modes and failure mechanisms for the AFW system at the selected plants. Ginna was selected as the eighth plant for study. The product of this effort is a prioritized listing of AFW failures which have occurred at the plant and at other PWRs. This listing is intended for use by NRC inspectors in the preparation of inspection plans addressing AFW risk-important components at the Ginna plant. 23 refs., 1 fig., 1 tab

Univariate Lp and ɭ p Averaging, 0 < p < 1, in Polynomial Time by Utilization of Statistical Structure

Directory of Open Access Journals (Sweden)

John E. Lavery

2012-10-01

Full Text Available We present evidence that one can calculate generically combinatorially expensive Lp and lp averages, 0 < p < 1, in polynomial time by restricting the data to come from a wide class of statistical distributions. Our approach differs from the approaches in the previous literature, which are based on a priori sparsity requirements or on accepting a local minimum as a replacement for a global minimum. The functionals by which Lp averages are calculated are not convex but are radially monotonic and the functionals by which lp averages are calculated are nearly so, which are the keys to solvability in polynomial time. Analytical results for symmetric, radially monotonic univariate distributions are presented. An algorithm for univariate lp averaging is presented. Computational results for a Gaussian distribution, a class of symmetric heavy-tailed distributions and a class of asymmetric heavy-tailed distributions are presented. Many phenomena in human-based areas are increasingly known to be represented by data that have large numbers of outliers and belong to very heavy-tailed distributions. When tails of distributions are so heavy that even medians (L1 and l1 averages do not exist, one needs to consider using lp minimization principles with 0 < p < 1.

Equalizer Complexity for 6-LP Mode 112 Gbit/s m-ary DP-QAM Space Division Multiplexed Transmission in Strongly Coupled Few-Mode-Fibers

DEFF Research Database (Denmark)

Asif, Rameez; Ye, Feihong; Morioka, Toshio

2015-01-01

12×12 multiple-input multiple-output (MIMO) adaptive digital signal processing (DSP). Time domain equalization (TDE) is realized to implement the linear adaptive MIMO module that is implemented in blind mode using conventional constant-modulusalgorithm (CMA) for finite impulse response (FIR) adaptive......We have quantified equalizer complexity for transmitting dual-polarized 6-LP modes (LP01, LP11a, LP11b, LP21a, LP21b and LP02) of 112 Gbit/s m-ary QAM (m=4, 16, 32, 64, 256) single carrier signals over 20 km step-index few-mode fiber. The transmitted signals are strongly coupled and recovered using...

Condition Assessment Survey (CAS) Program. Deficiency standards and inspections methods manual: Volume 3, 0.03 Superstructure

Energy Technology Data Exchange (ETDEWEB)

1993-05-01

General information is presented on asset determinant factor/CAS profile codes/CAS cost process; guide sheet tool & material listing; testing methods; inspection frequency; standard system design life tables; system work breakdown structure; and general system/material data. Deficiency standards and inspection methods are presented for beams; pre-engineered building systems; floors; roof structure; stairs; and fireproofing.

76 FR 2432 - Bancshares Capital, L.P.; Notice of Surrender Under 13 CFR 107.1900

Science.gov (United States)

2011-01-13

... SMALL BUSINESS ADMINISTRATION [License No. 10/10-0194] Bancshares Capital, L.P.; Notice of Surrender Under 13 CFR 107.1900 Pursuant to the authority granted to the United States Small Business... 107.1900 of the Small Business Administration Rules and Regulations Bancshares Capital, L.P., 16118...

75 FR 35017 - Brookfield Energy Marketing LP; Supplemental Notice That Initial Market-Based Rate Filing...

Science.gov (United States)

2010-06-21

... Energy Marketing LP; Supplemental Notice That Initial Market-Based Rate Filing Includes Request for... proceeding of Brookfield Energy Marketing LP's application for market-based rate authority, with an... protests and interventions in lieu of paper, using the FERC Online links at http://www.ferc.gov . To...

Validation of ozone profile retrievals derived from the OMPS LP version 2.5 algorithm against correlative satellite measurements

Science.gov (United States)

Kramarova, Natalya A.; Bhartia, Pawan K.; Jaross, Glen; Moy, Leslie; Xu, Philippe; Chen, Zhong; DeLand, Matthew; Froidevaux, Lucien; Livesey, Nathaniel; Degenstein, Douglas; Bourassa, Adam; Walker, Kaley A.; Sheese, Patrick

2018-05-01

The Limb Profiler (LP) is a part of the Ozone Mapping and Profiler Suite launched on board of the Suomi NPP satellite in October 2011. The LP measures solar radiation scattered from the atmospheric limb in ultraviolet and visible spectral ranges between the surface and 80 km. These measurements of scattered solar radiances allow for the retrieval of ozone profiles from cloud tops up to 55 km. The LP started operational observations in April 2012. In this study we evaluate more than 5.5 years of ozone profile measurements from the OMPS LP processed with the new NASA GSFC version 2.5 retrieval algorithm. We provide a brief description of the key changes that had been implemented in this new algorithm, including a pointing correction, new cloud height detection, explicit aerosol correction and a reduction of the number of wavelengths used in the retrievals. The OMPS LP ozone retrievals have been compared with independent satellite profile measurements obtained from the Aura Microwave Limb Sounder (MLS), Atmospheric Chemistry Experiment Fourier Transform Spectrometer (ACE-FTS) and Odin Optical Spectrograph and InfraRed Imaging System (OSIRIS). We document observed biases and seasonal differences and evaluate the stability of the version 2.5 ozone record over 5.5 years. Our analysis indicates that the mean differences between LP and correlative measurements are well within required ±10 % between 18 and 42 km. In the upper stratosphere and lower mesosphere (> 43 km) LP tends to have a negative bias. We find larger biases in the lower stratosphere and upper troposphere, but LP ozone retrievals have significantly improved in version 2.5 compared to version 2 due to the implemented aerosol correction. In the northern high latitudes we observe larger biases between 20 and 32 km due to the remaining thermal sensitivity issue. Our analysis shows that LP ozone retrievals agree well with the correlative satellite observations in characterizing vertical, spatial and temporal

Increased intra-abdominal fat may lower HDL levels by increasing the fractional catabolic rate of Lp A-I in postmenopausal women.

Science.gov (United States)

Vajo, Zoltan; Terry, James G; Brinton, Eliot A

2002-02-01

High-density lipoprotein (HDL) particles without apolipoprotein A-II (Lp A-I) may be more anti-atherogenic than HDL with apo A-II (Lp A-I/AII) and Lp A-I is reported selectively to be reduced in cases of intra-abdominal obesity. We explored the mechanisms of this reduction by studying the turnover of Lp A-I and Lp A-I/A-II in postmenopausal women well characterized for total body, regional and sub-regional adiposity by body mass index (BMI), truncal girth ratio, and abdominal magnetic resonance imaging (MRI), respectively. We tested for possible cause-effect relationships by measuring inter-correlations among these variables. Intra-abdominal fat area correlated strongly and positively with the fractional catabolic rate (FCR) of Lp A-I (r=0.98, P=0.003). Intra-abdominal fat only showed a non-significant trend toward correlation with the FCR of Lp A-I/A-II (r=0.84, P=0.07), and had no correlation with the production or transport rate (TR) of either Lp A-I or Lp A-I/A-II (r=0.48 and 0.02, respectively, P>0.1). Subjects were studied both with and without estrogen replacement, allowing exploration of a possible interaction of adiposity with estrogen effects on HDL turnover. Response of HDL turnover to estrogen did not correlate with adiposity, except for a parameter of waist to hip ratio (WHR), which predicted the increase in LP A-I TR with estrogen (r=0.84, P=0.04). We conclude that intra-abdominal fat may lower HDL levels by increasing the FCR of Lp A-I, suggesting a mechanism by which central adiposity may be proatherogenic.

Modulation of gut barrier function in patients with obstructive jaundice using probiotic LP299v.

Science.gov (United States)

Jones, Claire; Badger, Stephen A; Regan, Mark; Clements, Barry W; Diamond, Tom; Parks, Rowan W; Taylor, Mark A

2013-12-01

This study aimed to determine the effect of LP229v on intestinal permeability and tumour necrosis factor (TNF) p55 receptor concentrations in patients with obstructive jaundice undergoing biliary drainage. Patients undergoing biliary drainage were recruited and randomized into three groups to receive Lactobacillus plantarum 299v (LP299v), inactivated LP299v (placebo) or water. These were administered daily at noon until 7 days after biliary drainage. Intestinal permeability was measured using the lactulose/mannitol (L/M) dual sugar absorption test on admission, the day before biliary drainage and on days 1 and 7 after biliary drainage. Blood and urine were collected to determine the L/M ratio and the TNF p55 receptor levels at each time point. A total of 25 patients were recruited; 12 had choledocholithiasis and nine had a periampullary tumour. Open surgical biliary drainage was performed in nine patients, endoscopic retrograde cholangiopancreatography in 12 and percutaneous transhepatic cholangiography in two. Five patients received LP299v, five received placebo and seven, water. The median L/M ratio was 0.035 (0.018-0.065) at baseline. No difference existed between the groups on admission, before drainage and on day 7 after drainage (P=0.59, 0.175 and 0.61, respectively). The L/M ratio was lower in the LP299v group on day 1 after drainage [0.01 (0.01) vs. 0.18 (0.03-0.3) and 0.11 (0.07-0.14); P=0.37]. Although the TNF p55 receptor levels were lower on day 1 after drainage in the LP299v group (15.3 vs. 30.9 vs. 82.7 ng/ml; P=0.43), the concentration at the four time points was similar (P=0.24, 0.96, 0.43 and 0.68). Pretreatment with probiotic LP299v improves intestinal permeability after biliary drainage and attenuates the inflammatory response. However, a larger multicentre trial is required to determine the effect on clinical outcome.

Dødshjælp, drabsforbud og deontologi

DEFF Research Database (Denmark)

Dige, Morten

2008-01-01

Et velkendt argument imod aktiv dødshjælp har det deontologiske forbud mod drab eller pligten til ikke at slå ihjel som en central præmis. Sådanne deontologiske argumenter spiller en fremtrædende rolle i nylige publikationer fra Det Etiske Råd. For at gælde ukvalificeret, må disse argumenter imid...

76 FR 20518 - Self-Certification and Employee Training of Mail-Order Distributors of Scheduled Listed Chemical...

Science.gov (United States)

2011-04-13

... regulated sellers--i.e., retail stores and mobile retail vendors--of scheduled listed chemical products. To... scheduled listed chemical products at retail. Sales at retail are those sales intended for personal use... available for public inspection online at http://www.regulations.gov and in the Drug Enforcement...

76 FR 12103 - Erie Boulevard Hydropower, L.P; Notice of Settlement Agreement and Soliciting Comments

Science.gov (United States)

2011-03-04

... Hydropower, L.P; Notice of Settlement Agreement and Soliciting Comments Take notice that the following... Boulevard Hydropower, L.P. e. Location: The existing multi-development project is located on the Oswegatchie... 791 (a)-825(r) h. Applicant Contact: Daniel Daoust, Erie Boulevard Hydropower, 33 West 1st Street...

Anti-soluble liver antigen/liver-pancreas (SLA/LP) antibodies in pediatric patients with autoimmune hepatitis.

Science.gov (United States)

Vitozzi, Susana; Djilali-Saiah, Idriss; Lapierre, Pascal; Alvarez, Fernando

2002-12-01

Antibodies against soluble liver antigen/liver-pancreas (SLA/LP) have been associated with severe autoimmune hepatitis (AIH) and poor outcome, but most of these reports have focused on adult patients. The aim of this study was to assess the prevalence and clinical significance of anti-SLA/LP antibodies in a pediatric population with AIH. We developed a quantitative enzyme-linked immunoassay (ELISA), a Western blot (WB) and an immunoprecipitation assay (IPA) based on recombinant cDNA from activated Jurkat cells. The specificity of these tests was validated by testing 200 serum samples from healthy subjects, and from patients with liver and non-liver diseases. Anti-SLA/LP antibodies were found in patients with type 1 and type 2 AIH. The prevalence of these antibodies in patients with type 1 AIH was: 42% when tested by ELISA, 15% by WB and 50% by IPA. In patients with type 2 AIH, the prevalence rates were 42% by ELISA, 18% by WB and 44% by IPA. The mean titer values for anti-SLA/LP antibodies was significantly higher in type 2 AIH (1:1,300 +/- 339) than in type 1 AIH (1:600 +/- 71; p LKM1) and anti-liver cytosol type 1 (LC1) antibodies in sera. The presence of anti-SLA/LP showed a significant female preponderance in type 1 and 2 AIH patients (p = 0.0003 and p = 0.003, respectively), and was significantly correlated with a lower age at diagnosis (p = 0.05) in type 1 AIH patients. In conclusion, anti-SLA/LP antibodies in pediatric patients are associated with both type 1 and 2 AIH.

Plant inspection tours with mobile data logging system

International Nuclear Information System (INIS)

Roesser, U.

2006-01-01

The MDE Mobile Data Logging System has been introduced in a number of German power plants for efficient logging, evaluation, and quality-assured documentation of data recorded on plant inspection tours by means of pocket PCs instead of slips of paper. It will be installed in other nuclear power plants in the near future. The MDE system is composed of the pocket PCs for logging data during plant inspection tours, the associated docking stations installed in the respective areas of application, one PC or, if necessary, several PCs with the appropriate user software, and the associated network links. To install the software in the power plant, lists of rooms and measurement stations as well as other positions on an inspection course are transmitted to the MDE system. When the system has been commissioned, inspection tours are planned in accordance with past experience and optimized in the computer. User experience is taken into account in program updates. New functions improve user comfort and ease of evaluation. Additions to the MDE software, and applications in other areas, are tentatively planned and will be implemented as the need arises. (orig.)

Increase in Multicast OFDM Data Rate in PLC Network using Adaptive LP-OFDM

OpenAIRE

Maiga , Ali; Baudais , Jean-Yves; Hélard , Jean-François

2009-01-01

ISBN: 978-1-4244-3523-4; International audience; Linear precoding (LP) technique applied to OFDM systems has already proved its ability to significantly increase the system throughput in a powerline communication (PLC) context. In this paper, we propose resource allocation algorithms based on the LP technique to increase the multicast OFDM systems bit rate. The conventional multicast capacity is limited by the user which experiences the worst channel conditions. To increase the multicast bit ...

Increased risk of coronary artery calcification progression in subjects with high baseline Lp(a) levels: The Kangbuk Samsung Health Study.

Science.gov (United States)

Cho, Jung Hwan; Lee, Da Young; Lee, Eun Seo; Kim, Jihyun; Park, Se Eun; Park, Cheol-Young; Lee, Won-Young; Oh, Ki-Won; Park, Sung-Woo; Rhee, Eun-Jung

2016-11-01

Results from previous studies support the association of lipoprotein(a) [Lp(a)] levels and coronary artery disease risk. In this study, we analyzed the association between baseline Lp(a) levels and future progression of coronary artery calcification (CAC) in apparently healthy Korean adults. A total of 2611 participants (mean age: 41years, 92% mend) who underwent a routine health check-up in 2010 and 2014 were enrolled. Coronary artery calcium score (CACS) were measured by multi-detector computed tomography. Baseline Lp(a) was measured by high-sensitivity immunoturbidimetric assay. Progression of CAC was defined as a change in CACS >0 over four years. Bivariate correlation analyses with baseline Lp(a) and other metabolic parameters revealed age, total cholesterol, HDL-C, LDL-C and CACS to have a significant positive correlation, while body weight, fasting glucose level, blood pressure and triglyceride level were negatively correlated with baseline Lp(a) level. After four years of follow-up, 635 subjects (24.3%) had CAC progression. The participants who had CAC progression were older, composed of more men, more obese, and had higher fasting glucose levels and worse baseline lipid profiles compared to those who did not have CAC progression. The mean serum Lp(a) level was significantly higher in subjects who had CAC progression compared to those who did not (32.5 vs. 28.9mg/dL, p<0.01). When the risk for CAC progression according to baseline Lp(a) was calculated, those with Lp(a) level≥50mg/dL had an odds ratio of 1.333 (95% CI 1.027-1.730) for CAC progression compared to those with Lp(a)<50mg/dL after adjusting for confounding factors. In this study, the subjects who had higher Lp(a) were at significantly higher risk for CAC progression after four years of follow-up, suggesting the role of high Lp(a) in CAC progression. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

77 FR 71585 - Brookfield Energy Marketing LP v. ISO New England Inc.; Notice of Complaint

Science.gov (United States)

2012-12-03

... Energy Marketing LP v. ISO New England Inc.; Notice of Complaint Take notice that on November 21, 2012...), Brookfield Energy Marketing LP (Complainant) filed a formal complaint against ISO New England Inc... notification when a document is added to a subscribed docket(s). For assistance with any FERC Online service...

76 FR 45247 - Tesoro Refining and Marketing Company v. SFPP, L.P.; Notice of Complaint

Science.gov (United States)

2011-07-28

... Refining and Marketing Company v. SFPP, L.P.; Notice of Complaint Take notice that on July 20, 2011... Marketing Company (Complainant) filed a formal complaint against SFPP L.P. (SFPP or Respondent) alleging... with any FERC Online service, please e-mail [email protected] , or call (866) 208-3676 (toll...

Mechanized inspection of steam generator components during manufacture

International Nuclear Information System (INIS)

Otte, H.-J.; Leupoldt, K.; Meister, W.

2009-01-01

the capability of automatic optimizing the inspection speed thus reducing the inspection time to a minimum. Full A-scan (HF information), peak and gate data acquisition can be selected. After performing the inspection resp. the inspection sequences the inspector can check the results before loading them to the network of the manufacturer for final storage on the server. If defects were found these defects can be automatically listed in an indication table providing all information necessary (location, size) to decide on the further procedure. (author)

Sunoco Pipeline, L.P. Clean Water Act Settlement - 2017

Science.gov (United States)

EPA, and the U.S. Department of Justice announced that Sunoco Pipeline, L.P. (Sunoco) has agreed to pay a civil penalty for alleged violation of the Clean Water Act stemming from a 2012 gasoline discharge near Wellington, Ohio.

In service inspection for Superphenix vessels development of ultrasonic techniques available at high temperature

International Nuclear Information System (INIS)

Gondard, C.

1983-12-01

The main and safety vessels of SUPERPHENIX 1 were designed to allow in-service inspections. The remote controlled inspection device MIR was developped for this purpose. The ultrasonic examination has required the development of all new transducers fitted with severe operating conditions prevailing in intervessels interval. A list of problems to be resolved and technological solutions which were found is given. Measurements of acoustical properties on actual probes are compared with theoretical values. It appears that concordance is good and that an in-service inspection using high temperature transducers is possible with a good spatial resolution and signal to noise ratio

Modulation of phosducin-like protein 3 (PhLP3 levels promotes cytoskeletal remodelling in a MAPK and RhoA-dependent manner.

Directory of Open Access Journals (Sweden)

Nandini V L Hayes

Full Text Available Phosducin-like protein 3 (PhLP3 forms a ternary complex with the ATP-dependent molecular chaperone CCT and its folding client tubulin. In vitro studies suggest PhLP3 plays an inhibitory role in β-tubulin folding while conversely in vivo genetic studies suggest PhLP3 is required for the correct folding of β-tubulin. We have a particular interest in the cytoskeleton, its chaperones and their role in determining cellular phenotypes associated with high level recombinant protein expression from mammalian cell expression systems.As studies into PhLP3 function have been largely carried out in non mammalian systems, we examined the effect of human PhLP3 over-expression and siRNA silencing using a single murine siRNA on both tubulin and actin systems in mammalian Chinese hamster ovary (CHO cell lines. We show that over-expression of PhLP3 promotes an imbalance of α and β tubulin subunits, microtubule disassembly and cell death. In contrast, β-actin levels are not obviously perturbed. On-the-other-hand, RNA silencing of PhLP3 increases RhoA-dependent actin filament formation and focal adhesion formation and promotes a dramatic elongated fibroblast-like change in morphology. This was accompanied by an increase in phosphorylated MAPK which has been associated with promoting focal adhesion assembly and maturation. Transient overexpression of PhLP3 in knockdown experiments rescues cells from the morphological change observed during PhLP3 silencing but mitosis is perturbed, probably reflecting a tipping back of the balance of PhLP3 levels towards the overexpression state.Our results support the hypothesis that PhLP3 is important for the maintenance of β-tubulin levels in mammalian cells but also that its modulation can promote actin-based cytoskeletal remodelling by a mechanism linked with MAPK phosphorylation and RhoA-dependent changes. PhLP3 levels in mammalian cells are thus finely poised and represents a novel target for engineering industrially

Condition Assessment Survey (CAS) Program. Deficiency standards and inspections methods manual: Volume 12, 0.12 Sitework

Energy Technology Data Exchange (ETDEWEB)

1993-05-01

General information is presented for asset determinant factor/CAS repair codes/CAS cost factors; guide sheet tool & material listing; testing methods; inspection frequency; standard system design life tables; system work breakdown structure; and general system/material data. Deficiency standards and inspection methods are given for utility distribution systems, central heating, central cooling, electrical, utility support structures, paving roadways/walkways, and tunnels.

Condition Assessment Survey (CAS) Program. Deficiency standards and inspections methods manual: Volume 5, 0.05 Roofing

Energy Technology Data Exchange (ETDEWEB)

1993-05-01

General information is presented for asset determinant factor/CAS repair codes/CAS cost factors; guide sheet tool & material listing; testing methods; inspection frequency; standard system design life tables; and system work breakdown structure. Deficiency standards and inspection methods are presented for built-up membrane; single- ply membrane; metal roofing systems; coated foam membrane; shingles; tiles; parapets; roof drainage system; roof specialties; and skylights.

76 FR 45246 - Tesoro Refining and Marketing Company v. SFPP, L.P.; Notice of Complaint

Science.gov (United States)

2011-07-28

... and Marketing Company v. SFPP, L.P.; Notice of Complaint Take notice that on July 20, 2011, pursuant...), Tesoro Refining and Marketing Company (Tesoro) filed a formal complaint against SFPP, L.P. (SFPP). Tesoro... notification when a document is added to a subscribed docket(s). For assistance with any FERC Online service...

77 FR 28375 - Eagle Rock Desoto Pipeline, L.P.; Notice of Petition for Rate Approval

Science.gov (United States)

2012-05-14

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. PR12-25-000] Eagle Rock Desoto Pipeline, L.P.; Notice of Petition for Rate Approval Take notice that on May 1, 2012, Eagle Rock Desoto Pipeline, L.P. (Desoto) filed a Rate Election pursuant to 284.123(b)(1) of the Commissions...

Auxiliary feedwater system risk-based inspection guide for the Palo Verde Nuclear Power Plant

International Nuclear Information System (INIS)

Bumgardner, J.D.; Moffitt, N.E.; Gore, B.F.; Vo, T.V.; Sloan, J.A.

1993-02-01

In a study sponsored by the US Nuclear Regulatory Commission (NRC), Pacific Northwest Laboratory has developed and applied a methodology for deriving plant-specific risk-based inspection guidance for the auxiliary feedwater (AFW) system at pressurized water reactors that have not undergone probabilistic risk assessment (PRA). This methodology uses existing PRA results and plant operating experience information. Existing PRA-based inspection guidance information recently developed for the NRC for various plants was used to identify generic component failure modes. This information was then combined with plant-specific and industry-wide component information and failure data to identify failure modes and failure mechanisms for the AFW system at the selected plants. Palo Verde was selected as one of a series of plants for study. The product of this effort is a prioritized listing of AFW failures which have occurred at the plant and at other PWRs. This listing is intended for use by NRC inspectors in the preparation of inspection plans addressing AFW risk-important components at the Palo Verde plants

Auxiliary feedwater system risk-based inspection guide for the McGuire nuclear power plant

International Nuclear Information System (INIS)

Bumgardner, J.D.; Lloyd, R.C.; Moffitt, N.E.; Gore, B.F.; Vo, T.V.

1994-05-01

In a study sponsored by the US Nuclear Regulatory Commission (NRC), Pacific Northwest Laboratory has developed and applied a methodology for deriving plant-specific risk-based inspection guidance for the auxiliary feedwater (AFW) system at pressurized water reactors that have not undergone probabilistic risk assessment (PRA). This methodology uses existing PRA results and plant operating experience information. Existing PRA-based inspection guidance information recently developed for the NRC for various plants was used to identify generic component failure modes. This information was then combined with plant-specific and industry-wide component information and failure data to identify failure modes and failure mechanisms for the AFW system at the selected plants. McGuire was selected as one of a series of plants for study. The product of this effort is a prioritized listing of AFW failures which have occurred at the plant and at other PWRs. This listing is intended for use by NRC inspectors in the preparation of inspection plans addressing AFW risk-important components at the McGuire plant

Auxiliary feedwater system risk-based inspection guide for the Maine Yankee Nuclear Power Plant

International Nuclear Information System (INIS)

Gore, B.F.; Vo, T.V.; Moffitt, N.E.; Bumgardner, J.D.

1992-10-01

In a study sponsored by the US Nuclear Regulatory Commission (NRC), Pacific Northwest Laboratory has developed and applied a methodology for deriving plant-specific risk-based inspection guidance for the auxiliary feedwater (AFW) system at pressurized water reactors that have not undergone probabilistic risk assessment (PRA). This methodology uses existing PRA results and plant operating experience information. Existing PRA-based inspection guidance information recently developed for the NRC for various plants was used to identify generic component failure modes. The information was then combined with plant-specific and industry-wide component information and failure data to identify failure modes and failure mechanisms for the AFW system at the selected plants. Maine Yankee was selected as one of a series of plants for study. ne product of this effort is a prioritized listing of AFW failures which have occurred at the plant and at other PWRs. This listing is intended for use by NRC inspectors in the preparation of inspection plans addressing AFW risk-important components at the Maine Yankee plant

Auxiliary feedwater system risk-based inspection guide for the Point Beach nuclear power plant

International Nuclear Information System (INIS)

Lloyd, R.C.; Moffitt, N.E.; Gore, B.F.; Vo, T.V.; Vehec, T.A.

1993-02-01

In a study sponsored by the US Nuclear Regulatory Commission (NRC), Pacific Northwest Laboratory has developed and applied a methodology for deriving plant-specific risk-based inspection guidance for the auxiliary feedwater (AFW) system at pressurized water reactors that have not undergone probabilistic risk assessment (PRA). This methodology uses existing PRA results and plant operating experience information. Existing PRA-based inspection guidance information recently developed for the NRC for various plants was used to identify generic component failure modes. This information was then combined with plant-specific and industry-wide component information and failure data to identify failure modes and failure mechanisms for the AFW system at the selected plants. Point Beach was selected as one of a series of plants for study. The product of this effort is a prioritized listing of AFW failures which have occurred at the plant and at other PWRS. This listing is intended for use by NRC inspectors in the preparation of inspection plans addressing AFW risk-important components at the Point Beach plant

State of the Art in LP-WAN Solutions for Industrial IoT Services

OpenAIRE

Sanchez-Iborra, Ramon; Cano, Maria-Dolores

2016-01-01

The emergence of low-cost connected devices is enabling a new wave of sensorization services. These services can be highly leveraged in industrial applications. However, the technologies employed so far for managing this kind of system do not fully cover the strict requirements of industrial networks, especially those regarding energy efficiency. In this article a novel paradigm, called Low-Power Wide Area Networking (LP-WAN), is explored. By means of a cellular-type architecture, LP-WAN–base...

78 FR 48205 - Ranger Alternative Management, L.P. and Ranger Funds Investment Trust; Notice of Application

Science.gov (United States)

2013-08-07

... Alternative Management, L.P. and Ranger Funds Investment Trust; Notice of Application August 1, 2013. AGENCY... Management, L.P. (``Ranger'') and Ranger Funds Investment Trust (the ``Trust''). Summary of Application... (e) certain registered management investment companies and unit investment trusts outside of the same...

76 FR 66710 - Erie Boulevard Hydropower, L.P.; Notice of Application Accepted for Filing, Soliciting Comments...

Science.gov (United States)

2011-10-27

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Project No. 5984-063] Erie Boulevard Hydropower, L.P.; Notice of Application Accepted for Filing, Soliciting Comments, Motions To Intervene, and....: 5984-063. c. Date Filed: May 10, 2011. d. Applicant: Erie Boulevard Hydropower, L.P. (dba Brookfield...

Specimen loading list for the varying temperature experiment

International Nuclear Information System (INIS)

Qualls, A.L.; Sitterson, R.G.

1998-01-01

The varying temperature experiment HFIR-RB-13J has been assembled and inserted in the reactor. Approximately 5300 specimens were cleaned, inspected, matched, and loaded into four specimen holders. A listing of each specimen loaded into the steady temperature holder, its position in the capsule, and the identification of the corresponding specimen loaded into the varying temperature holder is presented in this report

Validation of ozone profile retrievals derived from the OMPS LP version 2.5 algorithm against correlative satellite measurements

Directory of Open Access Journals (Sweden)

N. A. Kramarova

2018-05-01

Full Text Available The Limb Profiler (LP is a part of the Ozone Mapping and Profiler Suite launched on board of the Suomi NPP satellite in October 2011. The LP measures solar radiation scattered from the atmospheric limb in ultraviolet and visible spectral ranges between the surface and 80 km. These measurements of scattered solar radiances allow for the retrieval of ozone profiles from cloud tops up to 55 km. The LP started operational observations in April 2012. In this study we evaluate more than 5.5 years of ozone profile measurements from the OMPS LP processed with the new NASA GSFC version 2.5 retrieval algorithm. We provide a brief description of the key changes that had been implemented in this new algorithm, including a pointing correction, new cloud height detection, explicit aerosol correction and a reduction of the number of wavelengths used in the retrievals. The OMPS LP ozone retrievals have been compared with independent satellite profile measurements obtained from the Aura Microwave Limb Sounder (MLS, Atmospheric Chemistry Experiment Fourier Transform Spectrometer (ACE-FTS and Odin Optical Spectrograph and InfraRed Imaging System (OSIRIS. We document observed biases and seasonal differences and evaluate the stability of the version 2.5 ozone record over 5.5 years. Our analysis indicates that the mean differences between LP and correlative measurements are well within required ±10 % between 18 and 42 km. In the upper stratosphere and lower mesosphere (> 43 km LP tends to have a negative bias. We find larger biases in the lower stratosphere and upper troposphere, but LP ozone retrievals have significantly improved in version 2.5 compared to version 2 due to the implemented aerosol correction. In the northern high latitudes we observe larger biases between 20 and 32 km due to the remaining thermal sensitivity issue. Our analysis shows that LP ozone retrievals agree well with the correlative satellite observations in characterizing

Acceptance inspection plan 105KE Facility modifications for fuel retrieval subproject

International Nuclear Information System (INIS)

Shen, E.J.

1998-01-01

The acceptance inspection of construction by Fluor Daniel Hanford (FDH) is performed to provide assurance that fabrication, construction, and installation are in accordance with approved contract documents. Approved contract documents used to perform inspections may include specifications, drawings, and contractor submittals such as fabrication drawings, procedures, etc. The amount or degree of inspection activity is tailored to the project as determined by the project team so that the effort and cost expended are commensurate with the importance of the facility in terms of function and safety. Inspections are documented to provide verification of the acceptability of the work performed. This document identifies the inspections and documentation forms to be provided. It is prepared and implemented with the understanding that the construction contractor is fully responsible for compliance with contract documents and for the quality of work performed. Inspections performed are in accordance with approved procedures. The Manager of Acceptance Inspection is responsible for the implementation of this plan and assignment of personnel for the work. Inspections are conducted by personnel who are qualified and certified, to perform their assigned task. The Acceptance Inspection Plan is organized in the Construction Specification Institute (CSI) format to cross reference design specification sections with sections of the AI Plan. In each AI Plan section the applicable specification section subject will be identified followed by the appropriate inspection requirements. General surveillances will be listed when applicable. Acceptance Inspection Reports are provided to document inspections not documented on a test report (i.e., Soil Test Data, Concrete Test Report, NDE/Weld Record, Leak/Pressure Test Certification, Backflow Device Test Report, Nonconformance Report, Deficiency Report, and/or Contractors testing forms)

Acceptance inspection plan 105KW Facility modifications for fuel retrieval subproject

International Nuclear Information System (INIS)

Shen, E.J.

1998-01-01

The acceptance inspection of construction by Fluor Daniel Hanford (FDH) is performed to provide assurance that fabrication, construction, and installation are in accordance with approved contract documents. Approved contract documents used to perform inspections may include specifications, drawings, and contractor submittals such as fabrication drawings, procedures, etc. The amount or degree of inspection activity is tailored to the project as determined by the project team so that the effort and cost expended are commensurate with the importance of the facility in terms of function and safety. Inspections are documented to provide verification of the acceptability of the work performed. This document identifies the inspections and documentation forms to be provided. It is prepared and implemented with the understanding that the construction contractor is fully responsible for compliance with contract documents and for the quality of.work performed. Inspections performed are in accordance with approved procedures. The Manager of Acceptance Inspection is responsible for the implementation of this plan and assignment of personnel for the work. Inspections are conducted by personnel who are qualified and certified to perform their assigned task. The Acceptance Inspection Plan is organized in the Construction Specification Institute (CSI) format to cross reference design specification sections with sections of the AI Plan. In each AI Plan section the applicable specification section subject will be identified followed by the appropriate inspection requirements. General surveillances will be listed when applicable. Acceptance Inspection Reports are provided to document inspections not documented on a test report (i.e., Soil Test Data, Concrete Test Report, NDE/Weld Record, Leak/Pressure Test Certification, Backflow Device Test Report, Nonconformance Report, Deficiency Report, and/or Contractors testing forms)

Serum Lp-PLA2: as a novel viewpoint in periodontal treatment of hyperlipidaemics.

Science.gov (United States)

Fentoğlu, Özlem; Kirzioğlu, Fatma Yeşim; Tözüm Bulut, Memduha; Kurgan, Şivge; Koçak, Havva; Sütcü, Recep; Kale Köroğlu, Banu; Günhan, Meral

2015-01-01

To evaluate the effects of periodontal treatment on serum lipoprotein-associated phospholipase A2 (Lp-PLA2) and C-reactive protein (CRP) levels in hyperlipidaemic patients with periodontitis. The study included 52 hyperlipidaemics and 28 systemically healthy controls (C) with periodontitis. Of the 52 hyperlipidaemics, 29 received a suggested diet (HD), and 23 of them were prescribed statin (HS). Clinical periodontal parameters, serum lipids, Lp-PLA2, and CRP levels were assessed at the baseline and 2 months after the completion of the nonsurgical periodontal treatment (2MPT). Serum parameters were also evaluated 1 week following the periodontal treatment (1WPT). At the baseline, patients in the HS group had a higher percentage of bleeding on probing than those in the C and HD groups. Hyperlipidaemics had higher serum triglyceride levels than the control group at 2MPT compared to the baseline. At 2MPT, the levels of Lp-PLA2 in the HS group were significantly higher compared to the baseline and 1WPT. There were no statistically significant differences in CRP levels between study periods for all groups. The periodontal treatment may affect the inflammatory control of hyperlipidaemic patients with periodontitis via increased Lp-PLA2 levels and severity of the impaired lipid metabolism. These findings may be important regarding the therapeutic strategies for hyperlipidaemics with periodontitis.

Application of risk-informed in-service inspection approach. Pilot study on low pressure emergency core cooling system of NPP Temelin

International Nuclear Information System (INIS)

Horacek, L.; Palyza, J.; Zdarek, J.; Vizina, M.

2004-01-01

In-service inspection (ISI) programme of piping systems based on Riskinformed In-service Inspections (RI-ISI) approach represents for the WWER NPP licensee first overall systematic conceptual solution of the problems associated with design and design modifications of ISI programme for piping systems. The approach enables to consider possible savings and comparison of in-service inspection programmes according to more objective criteria including those calculated in PSA, in contrast to present much empiric experience collected by manufacturers, operators and ISI vendors in the past. Service experience has shown limited correlation between the deterministic ISI requirements and actual field failures or degradation mechanisms. Where field failures have been observed in piping, they have generally been due to either material concerns (e.g., Intergranular Stress Corrosion Cracking) or stress/cycling mechanisms not identified in the original design basis documents (e.g., thermal stratification), and therefore would not be selected for inspection under current requirements. Risk-informed in-service inspections represent integrated multidisciplinary approach to the in-service inspection programme fulfilling the enhanced requirements of the Czech Regulatory Body (SUJB) for defence in depth concept applied to weld joints of safety related components, application of qualified NDT methods/techniques and introducing of inspections for cause approach. Inspections for cause take into account analysis of both active and potential degradation mechanisms specific to piping system concerned. Simultaneously, this approach enables the licensee to reach, in cases justified from safety point of view, economic savings resulting from lowering of both number and extent of performed in-service inspections and optimisation of their performance. RI ISI pilot study based in majority on EPRI methodology implemented for WWER type reactors has been performed for LP ECCS (Low Pressure Emergency

76 FR 81360 - Special Conditions: Gulfstream Aerospace LP (GALP) Model G280 Airplane, Operation Without Normal...

Science.gov (United States)

2011-12-28

... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 25 [Docket No. FAA-2011-1172: Special Conditions No. 25-453-SC] Special Conditions: Gulfstream Aerospace LP (GALP) Model G280... Aerospace LP (GALP) Model G280 airplane. This airplane will have a novel or unusual design feature...

Lp-PLA2 activity is associated with increased risk of diabetic retinopathy: a longitudinal disease progression study.

Science.gov (United States)

Siddiqui, Moneeza K; Kennedy, Gwen; Carr, Fiona; Doney, Alexander S F; Pearson, Ewan R; Morris, Andrew D; Johnson, Toby; McLaughlin, Megan M; Williams, Rachel E; Palmer, Colin N A

2018-06-01

The aim of the study was to examine the association between lipoprotein-associated phospholipase A 2 (Lp-PLA 2 ) activity levels and incident diabetic retinopathy and change in retinopathy grade. This was a cohort study of diabetic participants with serum collected at baseline and routinely collected diabetic retinal screening data. Participants with type 2 diabetes from the GoDARTS (Genetics of Diabetes Audit and Research in Tayside Scotland) cohort were used. This cohort is composed of individuals of white Scottish ancestry from the Tayside region of Scotland. Survival analysis accounting for informative censoring by modelling death as a competing risk was performed for the development of incident diabetic retinopathy from a disease-free state in a 3 year follow-up period (n = 1364) by stratified Lp-PLA 2 activity levels (in quartiles). The same analysis was performed for transitions to more severe grades. The hazard of developing incident diabetic retinopathy was 2.08 times higher (95% CI 1.64, 2.63) for the highest quartile of Lp-PLA 2 activity compared with the lowest. Higher Lp-PLA 2 activity levels were associated with a significantly increased risk for transitions to all grades. The hazards of developing observable (or more severe) and referable (or more severe) retinopathy were 2.82 (95% CI 1.71, 4.65) and 1.87 (95% CI 1.26, 2.77) times higher for the highest quartile of Lp-PLA 2 activity compared with the lowest, respectively. Higher Lp-PLA 2 levels are associated with increased risk of death and the development of incident diabetic retinopathy, as well as transitions to more severe grades of diabetic retinopathy. These associations are independent of calculated LDL-cholesterol and other traditional risk factors. Further, this biomarker study shows that the association is temporally sensitive to the proximity of the event to measurement of Lp-PLA 2.

76 FR 25229 - Special Conditions: Gulfstream Aerospace LP (GALP) Model G250 Airplane, Dynamic Test Requirements...

Science.gov (United States)

2011-05-04

... Memorandum ``Side-Facing Seats on Transport Category Airplanes'' and draft Issue Paper ``Dynamic Test...; Special Conditions No. 25-425-SC] Special Conditions: Gulfstream Aerospace LP (GALP) Model G250 Airplane... are issued for the Gulfstream Aerospace LP (GALP) model G250 airplane. This airplane will have a novel...

77 FR 71680 - Buckeye East Chicago Railroad, LLC-Acquisition and Operation Exemption-Buckeye Partners, L.P.

Science.gov (United States)

2012-12-03

... Chicago Railroad, LLC--Acquisition and Operation Exemption--Buckeye Partners, L.P. Buckeye East Chicago... acquire from Buckeye Partners, L.P., a noncarrier, and to operate approximately 7,065 feet (1.34 miles) of..., 2012. By the Board, Rachel D. Campbell, Director, Office of Proceedings. Jeffrey Herzig, Clearance Unit...

76 FR 66660 - Special Conditions: Gulfstream Aerospace LP (GALP) Model G280 Airplane, Operation Without Normal...

Science.gov (United States)

2011-10-27

... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 25 [Docket No. FAA-2011-1172: Notice No. 25-11-17-SC] Special Conditions: Gulfstream Aerospace LP (GALP) Model G280 Airplane... Aerospace LP (GALP) Model G280 airplane. This airplane will have a novel or unusual design feature...

Antitumor activity of chLpMab-2, a human-mouse chimeric cancer-specific antihuman podoplanin antibody, via antibody-dependent cellular cytotoxicity.

Science.gov (United States)

Kaneko, Mika K; Yamada, Shinji; Nakamura, Takuro; Abe, Shinji; Nishioka, Yasuhiko; Kunita, Akiko; Fukayama, Masashi; Fujii, Yuki; Ogasawara, Satoshi; Kato, Yukinari

2017-04-01

Human podoplanin (hPDPN), a platelet aggregation-inducing transmembrane glycoprotein, is expressed in different types of tumors, and it binds to C-type lectin-like receptor 2 (CLEC-2). The overexpression of hPDPN is involved in invasion and metastasis. Anti-hPDPN monoclonal antibodies (mAbs) such as NZ-1 have shown antitumor and antimetastatic activities by binding to the platelet aggregation-stimulating (PLAG) domain of hPDPN. Recently, we developed a novel mouse anti-hPDPN mAb, LpMab-2, using the cancer-specific mAb (CasMab) technology. In this study we developed chLpMab-2, a human-mouse chimeric anti-hPDPN antibody, derived from LpMab-2. chLpMab-2 was produced using fucosyltransferase 8-knockout (KO) Chinese hamster ovary (CHO)-S cell lines. By flow cytometry, chLpMab-2 reacted with hPDPN-expressing cancer cell lines including glioblastomas, mesotheliomas, and lung cancers. However, it showed low reaction with normal cell lines such as lymphatic endothelial and renal epithelial cells. Moreover, chLpMab-2 exhibited high antibody-dependent cellular cytotoxicity (ADCC) against PDPN-expressing cells, despite its low complement-dependent cytotoxicity. Furthermore, treatment with chLpMab-2 abolished tumor growth in xenograft models of CHO/hPDPN, indicating that chLpMab-2 suppressed tumor development via ADCC. In conclusion, chLpMab-2 could be useful as a novel antibody-based therapy against hPDPN-expressing tumors. © 2017 The Authors. Cancer Medicine published by John Wiley & Sons Ltd.

Genome-wide association study of Lp-PLA(2 activity and mass in the Framingham Heart Study.

Directory of Open Access Journals (Sweden)

Sunil Suchindran

2010-04-01

Full Text Available Lipoprotein-associated phospholipase A(2 (Lp-PLA(2 is an emerging risk factor and therapeutic target for cardiovascular disease. The activity and mass of this enzyme are heritable traits, but major genetic determinants have not been explored in a systematic, genome-wide fashion. We carried out a genome-wide association study of Lp-PLA(2 activity and mass in 6,668 Caucasian subjects from the population-based Framingham Heart Study. Clinical data and genotypes from the Affymetrix 550K SNP array were obtained from the open-access Framingham SHARe project. Each polymorphism that passed quality control was tested for associations with Lp-PLA(2 activity and mass using linear mixed models implemented in the R statistical package, accounting for familial correlations, and controlling for age, sex, smoking, lipid-lowering-medication use, and cohort. For Lp-PLA(2 activity, polymorphisms at four independent loci reached genome-wide significance, including the APOE/APOC1 region on chromosome 19 (p = 6 x 10(-24; CELSR2/PSRC1 on chromosome 1 (p = 3 x 10(-15; SCARB1 on chromosome 12 (p = 1x10(-8 and ZNF259/BUD13 in the APOA5/APOA1 gene region on chromosome 11 (p = 4 x 10(-8. All of these remained significant after accounting for associations with LDL cholesterol, HDL cholesterol, or triglycerides. For Lp-PLA(2 mass, 12 SNPs achieved genome-wide significance, all clustering in a region on chromosome 6p12.3 near the PLA2G7 gene. Our analyses demonstrate that genetic polymorphisms may contribute to inter-individual variation in Lp-PLA(2 activity and mass.

Learning to perceive and recognize a second language: the L2LP model revised.

Science.gov (United States)

van Leussen, Jan-Willem; Escudero, Paola

2015-01-01

We present a test of a revised version of the Second Language Linguistic Perception (L2LP) model, a computational model of the acquisition of second language (L2) speech perception and recognition. The model draws on phonetic, phonological, and psycholinguistic constructs to explain a number of L2 learning scenarios. However, a recent computational implementation failed to validate a theoretical proposal for a learning scenario where the L2 has less phonemic categories than the native language (L1) along a given acoustic continuum. According to the L2LP, learners faced with this learning scenario must not only shift their old L1 phoneme boundaries but also reduce the number of categories employed in perception. Our proposed revision to L2LP successfully accounts for this updating in the number of perceptual categories as a process driven by the meaning of lexical items, rather than by the learners' awareness of the number and type of phonemes that are relevant in their new language, as the previous version of L2LP assumed. Results of our simulations show that meaning-driven learning correctly predicts the developmental path of L2 phoneme perception seen in empirical studies. Additionally, and to contribute to a long-standing debate in psycholinguistics, we test two versions of the model, with the stages of phonemic perception and lexical recognition being either sequential or interactive. Both versions succeed in learning to recognize minimal pairs in the new L2, but make diverging predictions on learners' resulting phonological representations. In sum, the proposed revision to the L2LP model contributes to our understanding of L2 acquisition, with implications for speech processing in general.

Development of inspection and maintenance program for reactor and reactivity control units in HANARO

International Nuclear Information System (INIS)

Cho, Yeong-Garp

1998-01-01

This paper summarizes the overall program for inspection and maintenance of reactor structure and Reactivity Control Units (RCU) of HANARO during lifetime. The long-term plan for in-service inspection is introduced in the viewpoint of the structural integrity of reactor and RCU, and the operability of RCU mechanism. This program includes the list of components to be inspected, the schedule of inspection and maintenance, and the development of special tools and test rig that are required for the remote inspection and maintenance of reactor and RCU components. Preliminary results of the evaluation on the lifetime of RCU components are summarized based on the operation history since the installation of reactor. A test rig will be designed and constructed for the purposes of verifying the prolonged lifetime of RCU components being used, the performance of special tools, and the rehearsal of maintenance work as well. (author)

77 FR 77122 - Pyxis Capital, L.P., et al.;

Science.gov (United States)

2012-12-31

... SECURITIES AND EXCHANGE COMMISSION [Investment Company Act Release No. 30316; 812-13489-01] Pyxis Capital, L.P., et al.; Notice of Application December 21, 2012. AGENCY: Securities and Exchange Commission (the ``Commission''). ACTION: Notice of an application for an order under section 6(c) of the...

Auxiliary feedwater system risk-based inspection guide for the South Texas Project nuclear power plant

International Nuclear Information System (INIS)

Bumgardner, J.D.; Nickolaus, J.R.; Moffitt, N.E.; Gore, B.F.; Vo, T.V.

1993-12-01

In a study sponsored by the US Nuclear Regulatory Commission (NRC), Pacific Northwest Laboratory has developed and applied a methodology for deriving plant-specific risk-based inspection guidance for the auxiliary feedwater (AFW) system at pressurized water reactors that have not undergone probabilistic risk assessment (PRA). This methodology uses existing PRA results and plant operating experience information. Existing PRA-based inspection guidance information recently developed for the NRC for various plants was used to identify generic component failure modes. This information was then combined with plant-specific and industry-wide component information and failure data to identify failure modes and failure mechanisms for the AFW system at the selected plants. South Texas Project was selected as a plant for study. The product of this effort is a prioritized listing of AFW failures which have occurred at the plant and at other PWRs. This listing is intended for use by the NRC inspectors in preparation of inspection plans addressing AFW risk important components at the South Texas Project plant

Auxiliary feedwater system risk-based inspection guide for the Byron and Braidwood nuclear power plants

International Nuclear Information System (INIS)

Moffitt, N.E.; Gore, B.F.; Vo, T.V.

1991-07-01

In a study sponsored by the US Nuclear Regulatory Commission (NRC), Pacific Northwest Laboratory has developed and applied a methodology for deriving plant-specific risk-based inspection guidance for the auxiliary feedwater (AFW) system at pressurized water reactors that have not undergone probabilistic risk assessment (PRA). This methodology uses existing PRA results and plant operating experience information. Existing PRA-based inspection guidance information recently developed for the NRC for various plants was used to identify generic component failure modes. This information was then combined with plant-specific and industry-wide component information and failure data to identify failure modes and failure mechanisms for the AFW system at the selected plants. Byron and Braidwood were selected for the fourth study in this program. The produce of this effort is a prioritized listing of AFW failures which have occurred at the plants and at other PWRs. This listing is intended for use by NRC inspectors in the preparation of inspection plans addressing AFW risk-important components at the Byron/Braidwood plants. 23 refs., 1 fig., 1 tab

Auxiliary feedwater system risk-based inspection guide for the H. B. Robinson nuclear power plant

International Nuclear Information System (INIS)

Moffitt, N.E.; Lloyd, R.C.; Gore, B.F.; Vo, T.V.; Garner, L.W.

1993-08-01

In a study sponsored by the US Nuclear Regulatory Commission (NRC), Pacific Northwest Laboratory has developed and applied a methodology for deriving plant-specific risk-based inspection guidance for the auxiliary feedwater (AFW) system at pressurized water reactors that have not undergone probabilistic risk assessment (PRA). This methodology uses existing PRA results and plant operating experience information. Existing PRA-based inspection guidance information recently developed for the NRC for various plants was used to identify generic component failure modes. This information was then combined with plant-specific and industry-wide component information and failure data to identify failure modes and failure mechanisms for the AFW system at the selected plants. H. B. Robinson was selected as one of a series of plants for study. The product of this effort is a prioritized listing of AFW failures which have occurred at the plant and at other PWRs. This listing is intended for use by NRC inspectors in the preparation of inspection plans addressing AFW risk-important components at the H. B. Robinson plant

Auxiliary feedwater system risk-based inspection guide for the J.M. Farley Nuclear Power Plant

International Nuclear Information System (INIS)

Vo, T.V.; Pugh, R.; Gore, B.F.; Harrison, D.G.

1990-10-01

In a study sponsored by the US Nuclear Regulatory Commission (NRC), Pacific Northwest Laboratory has developed and applied a methodology for deriving plant-specific risk-based inspection guidance for the auxiliary feedwater (AFW) system at pressurized water reactors that have not undergone probabilistic risk assessment(PRA). This methodology uses existing PRA results and plant operating experience information. Existing PRA-based inspection guidance recently developed for the NRC for various plants was used to identify generic component failure modes. This information was then combined with plant-specific and industry-wide component information and failure data to identify failure modes and failure mechanisms for the AFW system at the selected plants. J. M. Farley was selected as the second plant for study. The product of this effort is a prioritized listing of AFW failures which have occurred at the plant and at other PWRs. This listing is intended for use by NRC inspectors in the preparation of inspection plans addressing AFW risk-important at the J. M. Farley plant. 23 refs., 1 fig., 1 tab

Continuous and Lp estimates for the complex Monge-Ampère equation on bounded domains in ℂn

Directory of Open Access Journals (Sweden)

Patrick W. Darko

2002-01-01

Full Text Available Continuous solutions with continuous data and Lp solutions with Lp data are obtained for the complex Monge-Ampère equation on bounded domains, without requiring any smoothness of the domains.

78 FR 28273 - Alpine Investors IV SBIC, LP; Notice Seeking Exemption Under Section 312 of the Small Business...

Science.gov (United States)

2013-05-14

... SMALL BUSINESS ADMINISTRATION [License No. 09/09-0461] Alpine Investors IV SBIC, LP; Notice... hereby given that Alpine Investors IV SBIC, LP, 3 Embarcadero Center, Suite 2330, San Francisco, CA, a...'') Rules and [[Page 28274

78 FR 68044 - Erie Boulevard Hydropower, L.P.; Notice of Scoping Meetings and Environmental Site Review and...

Science.gov (United States)

2013-11-13

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Project No. 7320-042] Erie Boulevard Hydropower, L.P.; Notice of Scoping Meetings and Environmental Site Review and Soliciting Scoping Comments.... Date filed: July 1, 2013. d. Applicant: Erie Boulevard Hydropower, L.P. e. Name of Project: Chasm...

The importance of age and statin therapy in the interpretation of Lp-PLA(2) in ACS patients, and relation to CRP.

Science.gov (United States)

Franeková, J; Kettner, J; Kubíček, Z; Jabor, A

2015-01-01

C-reactive protein (CRP) is a marker of arterial inflammation while lipoprotein-associated phospholipase A(2) (Lp-PLA(2)) is related to plaque instability. The aim of this study was to evaluate the correlation between the risk of unstable plaque presenting as acute coronary syndrome (ACS) and Lp-PLA(2), and to assess the influence of statins on interpretation of Lp-PLA(2). A total of 362 consecutive patients presenting to the emergency department (ED) with acute chest pain suggestive of ACS were evaluated by cardiologists as STEMI, NSTEMI, or unstable angina, and non-ACS. Serum biomarkers measured on admission: troponin I, C-reactive protein (Abbott), and Lp-PLA(2) (DiaDexus). Four groups were defined according to the final diagnosis and history of statin medication: ACS/statin-; ACS/statin+; non-ACS/statin-; non-ACS/statin+. Lp-PLA(2) was highest in ACS/statin- group; statins decreased Lp-PLA(2) both in ACS and non-ACS of about 20 %. Lp-PLA(2) was higher in ACS patients in comparison with non-ACS patients group without respect to statin therapy (pPLA(2) predicted worse outcome (in terms of acute coronary syndrome) effectively in patients up to 62 years; limited prediction was found in older patients. C-reactive protein (CRP) failed to discriminate four groups of patients. Statin therapy and age should be taken into consideration while interpreting Lp-PLA(2) concentrations and lower cut-off values should be used for statin-treated persons.

Condition Assessment Survey (CAS) Program. Deficiency standards and inspections methods manual: Volume 6, 0.06 Interior construction

Energy Technology Data Exchange (ETDEWEB)

1993-05-01

General information is presented for asset determinant factor/CAS repair codes/CAS cost factors; guide sheet tool & material listing; testing methods; inspection frequency; standard system design life tables; system work breakdown structure; and general system/material data. Deficiency standards and inspection methods are presented for conventional and specialty partitions, toilet partitions & accessories, interior doors, paint finishes/coatings/ wall covering systems; floor finishing systems; and ceiling systems.

Condition Assessment Survey (CAS) Program. Deficiency standards and inspections methods manual: Volume 11, 0.11 Specialty systems

Energy Technology Data Exchange (ETDEWEB)

1993-05-01

General information is presented for asset determinant factor/CAS repair codes/CAS cost factors; guide sheet tool & material listing; testing methods; inspection frequency; standard system design life tables; system work breakdown structure; and general system/material data. Deficiency standards and inspection methods are presented for canopies; loading dock systems; tanks; domes (bulk storage, metal framing); louvers & vents; access floors; integrated ceilings; and mezzanine structures.

A list of methods to detect arthropod quarantine pests in Europe

NARCIS (Netherlands)

Augustin, S.; Kogel, de W.J.; Donner, P.; Faccoli, M.; Lees, D.C.; Marini, L.; Mori, N.; Toffolo, E.P.; Quilici, S.; Roques, A.; Yart, A.; Battisti, A.

2012-01-01

A total of 177 species of quarantine arthropods in Europe have been analysed for detection methods that are used in surveillance. This paper provides a link to a list where the methods most frequently used, either alone or in combination, are given for each species. Inspection remains the most

LP 400-22, A Very Low Mass and High-Velocity White Dwarf

Science.gov (United States)

Kawka, Adela; Vennes, Stephane; Oswalt, Terry D.; Smith, J. Allyn; Silvestri, Nicole M.

2006-01-01

We report the identification of LP 400-22 (WD 2234+222) as a very low mass and high-velocity white dwarf. The ultraviolet GALEX and optical photometric colors and a spectral line analysis of LP 400-22 show this star to have an effective temperature of 11,080+/-140 K and a surface gravity of log g = 6.32 +/-0.08. Therefore, this is a helium-core white dwarf with a mass of 0.17 M,. The tangential velocity of this white dwarf is 414+/-43 km/s, making it one of the fastest moving white dwarfs known. We discuss probable evolutionary scenarios for this remarkable object.

Condition Assessment Survey (CAS) Program. Deficiency standards and inspections methods manual: Volume 1, 0.01 Foundations and footings

Energy Technology Data Exchange (ETDEWEB)

1993-05-01

General information is presented for asset determinant factor/CAS repair codes/CAS cost factors; guide sheet tool & material listing; testing methods; inspection frequency; standard system design life tables; system work breakdown structure; and general system/material data. Deficiency standards and inspection methods are given for footings - spread/strip/grade beams; foundation walls; foundation dampproofing/waterproofing; excavation/backfill/ and piles & caissons.

77 FR 20871 - Praesidian Capital Opportunity Fund III, LP; License No. 02/02-0647; Notice Seeking Exemption...

Science.gov (United States)

2012-04-06

... contemplated to fund working capital and capital expenditures. The financing is brought within the purview of... SMALL BUSINESS ADMINISTRATION Praesidian Capital Opportunity Fund III, LP; License No. 02/02- 0647... given that Praesidian Capital Opportunity Fund III, LP, 419 Park Avenue South, New York, NY 10016, a...

75 FR 6414 - Cardinal Growth, L.P.; Notice Seeking Exemption Under Section 312 of the Small Business...

Science.gov (United States)

2010-02-09

... SMALL BUSINESS ADMINISTRATION [License No. 05/75-0257] Cardinal Growth, L.P.; Notice Seeking Exemption Under Section 312 of the Small Business Investment Act, Conflicts of Interest Notice is hereby given that Cardinal Growth, L.P., 311 South Wacker Driver, Suite 5500, Chicago, IL 60606, a Federal...

78 FR 77770 - Ironwood Equity Fund, LP; Notice Seeking Exemption Under Section 312 of the Small Business...

Science.gov (United States)

2013-12-24

... proposes to Finance a small business in which its Associate Ironwood Mezzanine Fund II, LP has an equity... SMALL BUSINESS ADMINISTRATION [ License No. 01171-0406] Ironwood Equity Fund, LP; Notice Seeking Exemption Under Section 312 of the Small Business Investment Act, Conflicts of Interest Notice is hereby...

78 FR 62348 - Erie Boulevard Hydropower, L.P.; Notice of Application Accepted for Filing and Soliciting Motions...

Science.gov (United States)

2013-10-18

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Project No. 7320-042] Erie Boulevard Hydropower, L.P.; Notice of Application Accepted for Filing and Soliciting Motions To Intervene and Protests.... Date filed: July 1, 2013. d. Applicant: Erie Boulevard Hydropower, L.P. e. Name of Project: Chasm...

Sib-pair analysis detects elevated Lp(a) levels and large variation of Lp(a) concentration in subjects with familial defective ApoB

NARCIS (Netherlands)

van der Hoek, Y. Y.; Lingenhel, A.; Kraft, H. G.; Defesche, J. C.; Kastelein, J. J.; Utermann, G.

1997-01-01

Whether or not Lp(a) plasma levels are affected by the apoB R3500Q mutation, which causes Familial Defective apoB (FDB), is still a matter of debate. We have analyzed 300 family members of 13 unrelated Dutch index patients for the apoB mutation and the apolipoprotein(a) [apo(a)] genotype. Total

Sparse filtering with the generalized lp/lq norm and its applications to the condition monitoring of rotating machinery

Science.gov (United States)

Jia, Xiaodong; Zhao, Ming; Di, Yuan; Li, Pin; Lee, Jay

2018-03-01

Sparsity is becoming a more and more important topic in the area of machine learning and signal processing recently. One big family of sparse measures in current literature is the generalized lp /lq norm, which is scale invariant and is widely regarded as normalized lp norm. However, the characteristics of the generalized lp /lq norm are still less discussed and its application to the condition monitoring of rotating devices has been still unexplored. In this study, we firstly discuss the characteristics of the generalized lp /lq norm for sparse optimization and then propose a method of sparse filtering with the generalized lp /lq norm for the purpose of impulsive signature enhancement. Further driven by the trend of industrial big data and the need of reducing maintenance cost for industrial equipment, the proposed sparse filter is customized for vibration signal processing and also implemented on bearing and gearbox for the purpose of condition monitoring. Based on the results from the industrial implementations in this paper, the proposed method has been found to be a promising tool for impulsive feature enhancement, and the superiority of the proposed method over previous methods is also demonstrated.

24 CFR 3282.360 - PIA acceptance of product certification programs or listings.

Science.gov (United States)

2010-04-01

... ENFORCEMENT REGULATIONS Primary Inspection Agencies § 3282.360 PIA acceptance of product certification... 24 Housing and Urban Development 5 2010-04-01 2010-04-01 false PIA acceptance of product certification programs or listings. 3282.360 Section 3282.360 Housing and Urban Development Regulations Relating...

Variation in LPA is associated with Lp(a levels in three populations from the Third National Health and Nutrition Examination Survey.

Directory of Open Access Journals (Sweden)

Logan Dumitrescu

2011-01-01

Full Text Available The distribution of lipoprotein(a [Lp(a] levels can differ dramatically across diverse racial/ethnic populations. The extent to which genetic variation in LPA can explain these differences is not fully understood. To explore this, 19 LPA tagSNPs were genotyped in 7,159 participants from the Third National Health and Nutrition Examination Survey (NHANES III. NHANES III is a diverse population-based survey with DNA samples linked to hundreds of quantitative traits, including serum Lp(a. Tests of association between LPA variants and transformed Lp(a levels were performed across the three different NHANES subpopulations (non-Hispanic whites, non-Hispanic blacks, and Mexican Americans. At a significance threshold of p<0.0001, 15 of the 19 SNPs tested were strongly associated with Lp(a levels in at least one subpopulation, six in at least two subpopulations, and none in all three subpopulations. In non-Hispanic whites, three variants were associated with Lp(a levels, including previously known rs6919246 (p = 1.18 × 10(-30. Additionally, 12 and 6 variants had significant associations in non-Hispanic blacks and Mexican Americans, respectively. The additive effects of these associated alleles explained up to 11% of the variance observed for Lp(a levels in the different racial/ethnic populations. The findings reported here replicate previous candidate gene and genome-wide association studies for Lp(a levels in European-descent populations and extend these findings to other populations. While we demonstrate that LPA is an important contributor to Lp(a levels regardless of race/ethnicity, the lack of generalization of associations across all subpopulations suggests that specific LPA variants may be contributing to the observed Lp(a between-population variance.

The effect of an inhibitor of gut serotonin (LP533401) during the induction of periodontal disease.

Science.gov (United States)

Lima, G M G; Corazza, B J M; Moraes, R M; de Oliveira, F E; de Oliveira, L D; Franco, G C N; Perrien, D S; Elefteriou, F; Anbinder, A L

2016-10-01

LP533401 is an inhibitor of tryptophan hydroxylase 1, which regulates serotonin production in the gut. Previous work indicates that LP533401 has an anabolic effect in bone. Thus, we hypothesized that inhibition of gut serotonin production may modulate the host response in periodontal disease. In this study, we aimed to analyze the effects of LP533401 in a rat periodontitis model to evaluate the role of gut serotonin in periodontitis pathophysiology. Twenty-four rats were divided into three groups: treated group (T: ligature-induced periodontal disease and LP533401, 25 mg/kg/d) by gavage; ligature group (L: ligature-induced periodontal disease only); and control group (C: without ligature-induced periodontal disease). After 28 d, radiographic alveolar bone support was measured on digital radiographs, and alveolar bone volume fraction, tissue mineral density and trabeculae characteristics were quantified by microcomputed tomography in the right hemi-mandible. Left hemi-mandibles were decalcified and alveolar bone loss, attachment loss and area of collagen in the gingiva were histologically analyzed. Significant difference between the L and C groups was found, confirming that periodontal disease was induced. We observed no difference between the T and L groups regarding alveolar bone destruction and area of collagen. LP533401 (25 mg/kg/d) for 28 d does not prevent bone loss and does not modulate host response in a rat model of induced periodontal disease. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

78 FR 48177 - Purdue Pharma L.P.; Withdrawal of Approval of a New Drug Application for Oxycontin

Science.gov (United States)

2013-08-07

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2013-N-0883] Purdue Pharma L.P.; Withdrawal of Approval of a New Drug Application for Oxycontin AGENCY: Food and Drug... Purdue Pharma L.P. (Purdue), One Stamford Forum, Stamford, CT 06901-3431. Purdue has voluntarily...

77 FR 11618 - Solutions Capital I, L.P.; Notice Seeking Exemption Under the Small Business Investment Act...

Science.gov (United States)

2012-02-27

... SMALL BUSINESS ADMINISTRATION [License No. 03/03-0247] Solutions Capital I, L.P.; Notice Seeking Exemption Under the Small Business Investment Act, Conflicts of Interest Notice is hereby given that Solutions Capital I, L.P., 1100 Wilson Blvd., Suite 3000, Arlington, VA 22209, a Federal Licensee under the...

76 FR 18210 - Texas Eastern Transmission, LP; Notice of Application

Science.gov (United States)

2011-04-01

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. CP11-138-000] Texas Eastern Transmission, LP; Notice of Application On March 15, 2011, Texas Eastern Transmission Corporation (Texas Eastern), 5400 Westheimer Court, Houston, Texas 77056-5310, filed with the Federal Energy Regulatory...

Prenatal exposure to a maternal LP diet decreases BDNF expression in the brains of the neonatal offspring

Science.gov (United States)

Maternal low protein (LP) diets during gestation cause learning and mernmy impai1ment as well as cognitive deficits in the neonatal and adult offsp1ing. The cellular and molecular mechanism that mediate the deleterious effects of prenatal exposure to a maternal LP diet on cognitive function is egreg...

78 FR 338 - Buckeye Hammond Railroad, L.L.C.; Acquisition and Operation Exemption; Buckeye Partners, L.P.

Science.gov (United States)

2013-01-03

... Railroad, L.L.C.; Acquisition and Operation Exemption; Buckeye Partners, L.P. Buckeye Hammond Railroad, L.L... acquire from Buckeye Partners, L.P., a noncarrier, and to operate approximately 6,797 feet (1.29 miles) of...: December 26, 2012. By the Board, Rachel D. Campbell, Director, Office of Proceedings. Jeffrey Herzig...

78 FR 4842 - Linden VFT, LLC v. Brookfield Energy Marketing, LP, Cargill Power Markets, LLC; Notice of Complaint

Science.gov (United States)

2013-01-23

... v. Brookfield Energy Marketing, LP, Cargill Power Markets, LLC; Notice of Complaint Take notice that... Brookfield Energy Marketing, LP and Cargill Power Markets, LLC (Respondents) alleging that, Respondents... subscribed docket(s). For assistance with any FERC Online service, please email [email protected

RANS simulation of the thermal mixing in HTTF LP during normal operation conditions – High Temperature Test Facility at Oregon State University

International Nuclear Information System (INIS)

Gradecka, Malwina J.; Woods, Brian

2014-01-01

Since High Temperature Gas-cooled Reactors are being considered as the most promising design of upcoming IV Gen reactors, key research areas were identified to address safety aspects of this design. A number of simulations and experiments need to be conducted in this field. In this paper, thermal-hydraulics aspects of coolant flow through Lower Plenum (LP) of HTGR were considered, specifically flow characteristics to identify the risk of temperature stratification in LP and hot spotting on LP floor. Local temperature gradients can cause material degradation. As the power profile is non-uniform across the core, jets of coolant exit the core region at different temperatures and enter the LP impinging on LP floor causing hot spots at LP structure and temperature stratification. To address those issues numerical simulation and an experiment are being developed. The numerical simulation provides coolant flow velocity and temperature fields. The purpose of this study is to investigate the mixing phenomenon in the LP due to risk of the hot streaking and thermal stratification phenomena during normal operation of HTTF. The following aspect are being examined: identification of gas flow behavior in lower plenum of HTTF based on CFD simulations, identification of hot streaking issue in the HTTF lower plenum using CFD tools, and computational investigation of gas mixing efficiency. This paper includes a description of experimental setup of HTTF, guidance for LP CFD modeling, and the results and analysis of CFD simulation. (author)

Norra LP-mudel ajab Eestis juuri / intervjueerinud Sirje Pärismaa

Index Scriptorium Estoniae

2016-01-01

Teaduspõhise LP-mudeli (Learning environment and pedagogical analysis) - abivahendi koolikultuuri parandamiseks ja süsteemsemaks lähenemiseks tekkinud probleemidele - on kasutusele võtnud 10 kooli ja 3 lasteaeda. Norra hariduseksperdid Janne Stoen ja Hanna Jahnsen vastasid Õpetajate Lehe küsimustele

78 FR 64933 - Texas Eastern Transmission, LP; Notice of Application

Science.gov (United States)

2013-10-30

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. CP14-4-000] Texas Eastern Transmission, LP; Notice of Application Take notice that on October 10, 2013, Texas Eastern Transmission, (Texas Eastern), having its principal place of business at 5400 Westheimer Court, Houston, Texas, 77056...

75 FR 79065 - Emergence Capital Partners SBIC, L.P. License No. 09/79-0454; Notice Seeking Exemption Under...

Science.gov (United States)

2010-12-17

... 95113. The financing is contemplated for working capital and general operating purposes. The financing... SMALL BUSINESS ADMINISTRATION Emergence Capital Partners SBIC, L.P. License No. 09/79-0454; Notice... hereby given that Emergence Capital Partners SBIC, L.P., 160 Bovet Road, Suite 300, San Mateo, CA 94402...

75 FR 39588 - Emergence Capital Partners SBIC, L.P.; Notice Seeking Exemption Under Section 312 of the Small...

Science.gov (United States)

2010-07-09

..., San Jose, California 95113. The financing is contemplated for working capital and general operating... SMALL BUSINESS ADMINISTRATION [License No. 09/79-0454] Emergence Capital Partners SBIC, L.P... Notice is hereby given that Emergence Capital Partners SBIC, L.P., 160 Bovet Road, Suite 300, San Mateo...

76 FR 76474 - Emergence Capital Partners SBIC, L.P.; Notice Seeking Exemption Under Section 312 of the Small...

Science.gov (United States)

2011-12-07

..., Emeryville, CA 94608 (``Lithium''). The financing is contemplated for working capital and general operating... SMALL BUSINESS ADMINISTRATION [License No. 09/79-0454] Emergence Capital Partners SBIC, L.P... Notice is hereby given that Emergence Capital Partners SBIC, L.P., 160 Bovet Road, Suite 300, San Mateo...

76 FR 1491 - Emergence Capital Partners SBIC, L.P. License No. 09/79-0454; Notice Seeking Exemption Under...

Science.gov (United States)

2011-01-10

... financing is contemplated for working capital and general operating purposes. The financing is brought... SMALL BUSINESS ADMINISTRATION Emergence Capital Partners SBIC, L.P. License No. 09/79-0454; Notice... hereby given that Emergence Capital Partners SBIC, L.P., 160 Bovet Road, Suite 300, San Mateo, CA 94402...

76 FR 28843 - Emergence Capital Partners SBIC, L.P.; Notice Seeking Exemption Under Section 312 of the Small...

Science.gov (United States)

2011-05-18

... 94404. The financing is contemplated for working capital and general operating purposes. The financing... SMALL BUSINESS ADMINISTRATION [License No. 09/79-0454] Emergence Capital Partners SBIC, L.P... Notice is hereby given that Emergence Capital Partners SBIC, L.P., 160 Bovet Road, Suite 300, San Mateo...

75 FR 32230 - Emergence Capital Partners SBIC, L.P.; Notice Seeking Exemption Under Section 312 of the Small...

Science.gov (United States)

2010-06-07

... is contemplated for working capital and general operating purposes. The financing is brought within... SMALL BUSINESS ADMINISTRATION [License No. 09/79-0454] Emergence Capital Partners SBIC, L.P... Notice is hereby given that Emergence Capital Partners SBIC, L.P., 160 Bovet Road, Suite 300, San Mateo...

46 CFR 153.812 - Inspection for Certificate of Inspection.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Inspection for Certificate of Inspection. 153.812... CARGOES SHIPS CARRYING BULK LIQUID, LIQUEFIED GAS, OR COMPRESSED GAS HAZARDOUS MATERIALS Design and Equipment Testing and Inspection § 153.812 Inspection for Certificate of Inspection. The rules governing the...

Reliability of non-destructive test techniques in the inspection of pipelines used in the oil industry

International Nuclear Information System (INIS)

Carvalho, A.A.; Rebello, J.M.A.; Souza, M.P.V.; Sagrilo, L.V.S.; Soares, S.D.

2008-01-01

The aim of this work is to evaluate the reliability of non-destructive test (NDT) techniques for the inspection of pipeline welds employed in the petroleum industry. Radiography, manual and automatic ultrasonic techniques using pulse-echo and time of flight diffraction (TOFD) were employed. Three classes of defects were analyzed: lack of penetration (LP), lack of fusion (LF) and undercut (UC). The tests were carried out on specimen made from pipelines containing defects, which had been artificially inserted on laying the weld bead. The results showed the superiority of the automatic ultrasonic tests for defect detection compared with the manual ultrasonic and radiographic tests. Additionally, artificial neural networks (ANN) were used in the detection and automatic classification of the defects

75 FR 32230 - Solutions Capital I, L.P.; Notice Seeking Exemption Under Section 312 of the Small Business...

Science.gov (United States)

2010-06-07

... working capital and general corporate purposes. The financing is brought within the purview of Sec. 107... SMALL BUSINESS ADMINISTRATION [License No. 03/03-0247] Solutions Capital I, L.P.; Notice Seeking... given that Solutions Capital I, L.P., 1100 Wilson Blvd., Suite 3000, Arlington, VA 22209, a Federal...

78 FR 78350 - Houston Pipe Line Company, LP; Notice of Intent to Prepare an Environmental Assessment for the...

Science.gov (United States)

2013-12-26

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. CP14-13-000] Houston Pipe Line Company, LP; Notice of Intent to Prepare an Environmental Assessment for the Proposed 24-Inch... Hidalgo County, Texas by Houston Pipe Line Company, LP (HPL). The Commission will use this EA in its...

75 FR 3502 - KLH Capital, L.P.; Notice Seeking Exemption Under 312 of the Small Business Investment Act...

Science.gov (United States)

2010-01-21

... SMALL BUSINESS ADMINISTRATION [License No. 04/04-0296] KLH Capital, L.P.; Notice Seeking Exemption Under 312 of the Small Business Investment Act, Conflicts of Interest Notice is hereby given that KLH Capital, L.P., 101 East Kennedy Boulevard, Suite 3925, Tampa, Florida 33602, a Federal Licensee under the...

The obesity and fatty liver are reduced by plant-derived Pediococcus pentosaceus LP28 in high fat diet-induced obese mice.

Directory of Open Access Journals (Sweden)

Xingrong Zhao

Full Text Available We evaluated the effect of an oral administration of a plant-derived lactic acid bacterium, Pediococcus pentosaceus LP28 (LP28, on metabolic syndrome by using high fat diet-induced obese mice. The obese mice were divided into 2 groups and fed either a high fat or regular diet for 8 weeks. Each group was further divided into 3 groups, which took LP28, another plant-derived Lactobacillus plantarum SN13T (SN13T or no lactic acid bacteria (LAB. The lean control mice were fed a regular diet without inducing obesity prior to the experiment. LP28 reduced body weight gain and liver lipid contents (triglyceride and cholesterol, in mice fed a high fat diet for 8 weeks (40%, 54%, and 70% less than those of the control group without LAB, and P = 0.018, P<0.001, and P = 0.021, respectively, whereas SN13T and the heat treated LP28 at 121°C for 15 min were ineffective. Abdominal visceral fat in the high fat diet mice fed with LP28 was also lower than that without LAB by 44%, although it was not significant but borderline (P = 0.076. The sizes of the adipocytes and the lipid droplets in the livers were obviously decreased. A real-time PCR analyses showed that lipid metabolism-related genes, such as CD36 (P = 0.013, SCD1 encoding stearoyl-CoA desaturase 1 (not significant but borderline, P = 0.066, and PPARγ encoding peroxisome proliferator-activated receptor gamma (P = 0.039, were down-regulated by taking LP28 continuously, when compared with those of the control group. In conclusion, LP28 may be a useful LAB strain for the prevention and reduction of the metabolic syndrome.

IS30-related transposon mediated insertional inactivation of bile salt hydrolase (bsh1) gene of Lactobacillus plantarum strain Lp20.

Science.gov (United States)

Kumar, Rajesh; Grover, Sunita; Kaushik, Jai K; Batish, Virender Kumar

2014-01-01

Lactobacillus plantarum is a flexible and versatile microorganism that inhabits a variety of niches, and its genome may express up to four bsh genes to maximize its survival in the mammalian gut. However, the ecological significance of multiple bsh genes in L. plantarum is still not clearly understood. Hence, this study demonstrated the disruption of bile salt hydrolase (bsh1) gene due to the insertion of a transposable element in L. plantarum Lp20 - a wild strain of human fecal origin. Surprisingly, L. plantarum strain Lp20 produced a ∼2.0 kb bsh1 amplicon against the normal size (∼1.0 kb) bsh1 amplicon of Bsh(+)L. plantarum Lp21. Strain Lp20 exhibited minimal Bsh activity in spite of having intact bsh2, bsh3 and bsh4 genes in its genome and hence had a Bsh(-) phenotype. Cloning and sequence characterization of Lp20 bsh1 gene predicted four individual open reading frames (ORFs) within this region. BLAST analysis of ORF1 and ORF2 revealed significant sequence similarity to the L. plantarum bsh1 gene while ORF3 and ORF4 showed high sequence homology to IS30-family transposases. Since, IS30-related transposon element was inserted within Lp20 bsh1 gene in reverse orientation (3'-5'), it introduced several stop codons and disrupted the protein reading frames of both Bsh1 and transposase. Inverted terminal repeats (GGCAGATTG) of transposon, mediated its insertion at 255-263 nt and 1301-1309 nt positions of Lp20 bsh1 gene. In conclusion, insertion of IS30 related-transposon within the bsh1 gene sequence of L. plantarum strain Lp20 demolished the integrity and functionality of Bsh1 enzyme. Additionally, this transposon DNA sequence remains active among various Lactobacillus spp. and hence harbors the potential to be explored in the development of efficient insertion mutagenesis system. Copyright © 2013 Elsevier GmbH. All rights reserved.

75 FR 28657 - Dell Products LP-Parmer North Location, a Subsidiary of Dell, Inc., Including On-Site Leased...

Science.gov (United States)

2010-05-21

... Spherion Corporation; Round Rock, TX; Dell Products LP--Parmer North One; Austin, TX; Amended Certification... Products LP--Parmer North Location, a Subsidiary of Dell, Inc., Including On-Site Leased Workers From... Act of 1974, as amended (``Act''), 19 U.S.C. 2273, the Department of Labor issued a Certification of...

76 FR 36910 - Astoria Generating Company, L.P., NRG Power Marketing LLC, Arthur Kill Power LLC, Astoria Gas...

Science.gov (United States)

2011-06-23

... Generating Company, L.P., NRG Power Marketing LLC, Arthur Kill Power LLC, Astoria Gas Turbine Power LLC... Generating Company, L.P., NRG Power Marketing LLC, Arthur Kill Power LLC, Astoria Gas Turbine Power [[Page... subscribed docket(s). For assistance with any FERC Online service, please e-mail [email protected

Development of a methodology for conducting an integrated HRA/PRA --. Task 1, An assessment of human reliability influences during LP&S conditions PWRs

Energy Technology Data Exchange (ETDEWEB)

Luckas, W.J.; Barriere, M.T.; Brown, W.S. [Brookhaven National Lab., Upton, NY (United States); Wreathall, J. [Wreathall (John) and Co., Dublin, OH (United States); Cooper, S.E. [Science Applications International Corp., McLean, VA (United States)

1993-06-01

During Low Power and Shutdown (LP&S) conditions in a nuclear power plant (i.e., when the reactor is subcritical or at less than 10--15% power), human interactions with the plant`s systems will be more frequent and more direct. Control is typically not mediated by automation, and there are fewer protective systems available. Therefore, an assessment of LP&S related risk should include a greater emphasis on human reliability than such an assessment made for power operation conditions. In order to properly account for the increase in human interaction and thus be able to perform a probabilistic risk assessment (PRA) applicable to operations during LP&S, it is important that a comprehensive human reliability assessment (HRA) methodology be developed and integrated into the LP&S PRA. The tasks comprising the comprehensive HRA methodology development are as follows: (1) identification of the human reliability related influences and associated human actions during LP&S, (2) identification of potentially important LP&S related human actions and appropriate HRA framework and quantification methods, and (3) incorporation and coordination of methodology development with other integrated PRA/HRA efforts. This paper describes the first task, i.e., the assessment of human reliability influences and any associated human actions during LP&S conditions for a pressurized water reactor (PWR).

Monitoring well inspection and maintenance plan Y-12 Plant, Oak Ridge, Tennessee (revised)

International Nuclear Information System (INIS)

1996-09-01

Inspection and maintenance of groundwater monitoring wells is a primary element of the Oak Ridge Y-12 Plant Groundwater Protection Program (GWPP). This document is the revised groundwater monitoring well inspection and maintenance plan for the U.S. Department of Energy (DOE) Y-12 Plant in Oak Ridge, Tennessee. The plan provides a systematic program for: (1) inspecting the physical condition of monitoring wells at the Y-12 Plant and (2) identifying maintenance needs that will extend the life of each well and ensure that representative groundwater quality samples and hydrologic data are collected from the wells. Original documentation for the Y-12 Plant GWPP monitoring well inspection and maintenance program was provided in HSW, Inc. 1991a. The original revision of the plan specified that only a Monitoring Well Inspection/Maintenance Summary need be updated and reissued each year. Rapid growth of the monitoring well network and changing regulatory requirements have resulted in constant changes to the status of wells (active or inactive) listed on the Monitoring Well Inspection/Maintenance Summary. As a result, a new mechanism to track the status of monitoring wells has been developed and the plan revised to formalize the new business practices. These changes are detailed in Sections 2.4 and 2.5

Inspection planning

International Nuclear Information System (INIS)

Korosec, D.; Levstek, M.F.

2001-01-01

Slovenian Nuclear Safety Administration (SNSA) division of nuclear and radiological safety inspection has developed systematic approach to their inspections. To be efficient in their efforts regarding regular and other types of inspections, in past years, the inspection plan has been developed. It is yearly based and organized on a such systematic way, that all areas of nuclear safety important activities of the licensee are covered. The inspection plan assures appropriate preparation for conducting the inspections, allows the overview of the progress regarding the areas to be covered during the year. Depending on the licensee activities and nature of facility (nuclear power plant, research reactor, radioactive waste storage, others), the plan has different levels of intensity of inspections and also their frequency. One of the basic approaches of the plan is to cover all nuclear and radiological important activities on such way, that all regulatory requests are fulfilled. In addition, the inspection plan is a good tool to improve inspection effectiveness based on previous experience and allows to have the oversight of the current status of fulfillment of planned inspections. Future improvement of the plan is necessary in the light of newest achievements on this field in the nuclear world, that means, new types of inspections are planned and will be incorporated into plan in next year.(author)

Antiglycopeptide Mouse Monoclonal Antibody LpMab-21 Exerts Antitumor Activity Against Human Podoplanin Through Antibody-Dependent Cellular Cytotoxicity and Complement-Dependent Cytotoxicity.

Science.gov (United States)

Kato, Yukinari; Kunita, Akiko; Fukayama, Masashi; Abe, Shinji; Nishioka, Yasuhiko; Uchida, Hiroaki; Tahara, Hideaki; Yamada, Shinji; Yanaka, Miyuki; Nakamura, Takuro; Saidoh, Noriko; Yoshida, Kanae; Fujii, Yuki; Honma, Ryusuke; Takagi, Michiaki; Ogasawara, Satoshi; Murata, Takeshi; Kaneko, Mika K

2017-02-01

The interaction between podoplanin (PDPN) and C-type lectin-like receptor 2 (CLEC-2) is involved in tumor malignancy. We have established many monoclonal antibodies (mAbs) against human podoplanin using the cancer-specific mAb (CasMab) technology. LpMab-21, one of the mouse antipodoplanin mAbs, is of the IgG 2a subclass, and its minimum epitope was determined to be Thr76-Arg79 of the human podoplanin. Importantly, sialic acid is linked to Thr76; therefore, LpMab-21 is an antiglycopeptide mAb (GpMab). In this study, we investigated whether LpMab-21 shows antibody-dependent cellular cytotoxicity (ADCC) and complement-dependent cytotoxicity (CDC) against human podoplanin-expressing cancer cell lines in vitro and also studied its antitumor activities using a xenograft model. LpMab-21 showed high ADCC and CDC activities against not only podoplanin-expressing Chinese hamster ovary cells but also LN319 glioblastoma cells and PC-10 lung cancer cells, both of which endogenously express podoplanin. Furthermore, LpMab-21 decreased tumor growth in vivo, indicating that LpMab-21 could be useful for antibody therapy against human podoplanin-expressing cancers.

76 FR 34692 - Astoria Generating Company, L.P., NRG Power Marketing LLC, Arthur Kill Power LLC, Astoria Gas...

Science.gov (United States)

2011-06-14

... Generating Company, L.P., NRG Power Marketing LLC, Arthur Kill Power LLC, Astoria Gas Turbine Power LLC... Generating Company, L.P., NRG Power Marketing LLC, Arthur Kill Power LLC, Astoria Gas Turbine Power LLC... notification when a document is added to a subscribed docket(s). For assistance with any FERC Online service...

The antimicrobial lysine-peptoid hybrid LP5 inhibits DNA replication and induces the SOS response in Staphylococcus aureus

DEFF Research Database (Denmark)

Gottschalk, Sanne; Ifrah, Dan; Lerche, Sandra

2013-01-01

the growth of S. aureus without ATP leakage. Instead, LP5 bound DNA and inhibited macromolecular synthesis. The binding to DNA also led to inhibition of DNA gyrase and topoisomerase IV and caused induction of the SOS response. CONCLUSIONS: Our data demonstrate that LP5 may have a dual mode of action against...

Relative expression of bacterial and host specific genes associated with probiotic survival and viability in the mice gut fed with Lactobacillus plantarum Lp91.

Science.gov (United States)

Chandran, Archana; Duary, Raj Kumar; Grover, Sunita; Batish, Virender Kumar

2013-11-07

The present investigation was aimed at studying the relative expression of atpD (a key part of F1F0-ATPase operon), bsh (bile salt hydrolase), mub (mucus-binding protein) and MUC2 (mucin) genes in mouse model for establishing the in vivo functional efficacy of Lactobacillus plantarum Lp91 (MTCC5690) by reverse transcription-quantitative PCR (RT-qPCR). The atpD gene was significantly up-regulated to 2.0, 2.4 and 3.2 folds in Lp91 after 15, 30 and 60 min transit in the stomach of mice. The maximal significant (Pstrain Lp5276 after seven days of mice feeding. Simultaneously, mub gene expression increased to 12.8 and 22.7 fold in both Lp91 and Lp5276, respectively. The expression level of MUC2 was at the level of 1.6 and 2.1 fold in the host colon on administration with Lp91 and Lp5276 feeding, respectively. Hence, the expression of atpD, bsh, mub, MUC2 could be considered as prospective and potential biomarkers for screening of novel probiotic lactobacillus strains for optimal functionality in the gut. Copyright © 2013 Elsevier GmbH. All rights reserved.

Auxiliary feedwater system risk-based inspection guide for the Beaver Valley, Units 1 and 2 nuclear power plants

International Nuclear Information System (INIS)

Lloyd, R.C.; Vehec, T.A.; Moffitt, N.E.; Gore, B.F.; Vo, T.V.; Rossbach, L.W.; Sena, P.P. III

1993-02-01

In a study sponsored by the US Nuclear Regulatory Commission (NRC), Pacific Northwest Laboratory has developed and applied a methodology for deriving plant-specific risk-based inspection guidance for the auxiliary feedwater (AFW) system at pressurized water reactors that have not undergone probabilistic risk assessment (PRA). This methodology uses existing PRA results and plant operating experience information. Existing PRA-based inspection guidance information recently developed for the NRC for various plants was used to identify generic component failure modes. This information was then combined with plant-specific and industry-wide component information and failure data to identify failure modes and failure mechanisms for the AFW system at the selected plants. Beaver Valley Units 1 and 2 were selected as two of a series of plants for study. The product of this effort is a prioritized listing of AFW failures which have occurred at the plant and at other PWRs. This listing is intended for use by NRC inspectors in the preparation of inspection plans addressing AFW risk-important components at Beaver Valley Units 1 and 2

Inspection of Piezoceramic Transducers Used for Structural Health Monitoring

Directory of Open Access Journals (Sweden)

Inka Mueller

2017-01-01

Full Text Available The use of piezoelectric wafer active sensors (PWAS for structural health monitoring (SHM purposes is state of the art for acousto-ultrasonic-based methods. For system reliability, detailed information about the PWAS itself is necessary. This paper gives an overview on frequent PWAS faults and presents the effects of these faults on the wave propagation, used for active acousto-ultrasonics-based SHM. The analysis of the wave field is based on velocity measurements using a laser Doppler vibrometer (LDV. New and established methods of PWAS inspection are explained in detail, listing advantages and disadvantages. The electro-mechanical impedance spectrum as basis for these methods is discussed for different sensor faults. This way this contribution focuses on a detailed analysis of PWAS and the need of their inspection for an increased reliability of SHM systems.

Liquid-phase problems in steam turbine LP stages

International Nuclear Information System (INIS)

Blanc-Feraud, P.

1978-01-01

Wet steam formation owing to incipient condensation in final steam turbine pressure stages results in a loss of efficiency and possible rotor blading erosion. The effects of erosion are now clearly understood and quite easily counteracted, but loss of thermodynamics, mechanical and aerodynamic efficiency is still a problem. Only the final LP stages of conventional power station plant operate with wet steam, whereas nuclear plant turbines use it to produce most of their total output [fr

75 FR 45611 - Texas Eastern Transmission LP; Notice of Application

Science.gov (United States)

2010-08-03

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. CP10-471-000] Texas Eastern Transmission LP; Notice of Application July 27, 2010. Take notice that on July 15, 2010, Texas Eastern Transmission (Texas Eastern), P.O. Box 1642, Houston, Texas 77251-1642, filed in Docket No. CP10-471-000, an...

Characterizing the Resolved M6 Dwarf Twin LP 318-218AB

Science.gov (United States)

Moreno Hilario, Elizabeth; Burgasser, Adam J.; Bardalez Gagliuffi, Daniella; Tamiya, Tomoki

2017-01-01

The lowest-mass stars and brown dwarfs are among the most common objects in the Milky Way Galaxy, but theories of their formation and evolution remain poorly constrained. Binary systems are important for understanding the formation of these objects and for making direct orbit and mass measurements to validate evolutionary theories. We report the discovery of LP 318-218, a high proper motion late M dwarf, as a near equal-brightness binary system with a separation of 0.72 arcseconds. Resolved near-infrared spectroscopy confirms the components as nearly identical M6 twins. We using our resolved photometry and spectroscopy to estimate the distance, projected separation and tangential velocity of the system, and confirm common proper motion. We also perform atmosphere model fits to the resolved spectra to assess their physical properties. We place LP 318-218 in context with other widely-separated late M dwarf binaries.

Safety analysis report: packages. LP-12 tritium package (packaging of fissile and other radioactive materials). Final report

International Nuclear Information System (INIS)

Gates, A.A.; McCarthy, P.G.; Edl, J.W.

1975-05-01

Elemental tritium is shipped at low pressure in a stainless steel container (LP-12) within an aluminum vessel and surrounded by 3.9 in.-thick Celotex insulation in a steel drum. Information is presented on the packaging design, evaluation of the structural, thermal, containment, shielding, and criticality characteristics of the package, procedures for loading, unloading, transporting, and testing the LP-12, and quality assurance requirements. (U.S.)

LP DAAC MEaSUREs Project Artifact Tracking Via the NASA Earthdata Collaboration Environment

Science.gov (United States)

Bennett, S. D.

2015-12-01

The Land Processes Distributed Active Archive Center (LP DAAC) is a NASA Earth Observing System (EOS) Data and Information System (EOSDIS) DAAC that supports selected EOS Community non-standard data products such as the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) Global Emissivity Database (GED), and also supports NASA Earth Science programs such as Making Earth System Data Records for Use in Research Environments (MEaSUREs) to contribute in providing long-term, consistent, and mature data products. As described in The LP DAAC Project Lifecycle Plan (Daucsavage, J.; Bennett, S., 2014), key elements within the Project Inception Phase fuse knowledge between NASA stakeholders, data producers, and NASA data providers. To support and deliver excellence for NASA data stewardship, and to accommodate long-tail data preservation with Community and MEaSUREs products, the LP DAAC is utilizing NASA's own Earthdata Collaboration Environment to bridge stakeholder communication divides. By leveraging a NASA supported platform, this poster describes how the Atlassian Confluence software combined with a NASA URS/Earthdata support can maintain each project's members, status, documentation, and artifact checklist. Furthermore, this solution provides a gateway for project communities to become familiar with NASA clients, as well as educating the project's NASA DAAC Scientists for NASA client distribution.

75 FR 76037 - HAVI Logistics, North America a Subsidiary of HAVI Group, LP Including On-Site Leased Workers of...

Science.gov (United States)

2010-12-07

... Logistics, North America a Subsidiary of HAVI Group, LP Including On-Site Leased Workers of Express Personnel Services and the La Salle Network, Bloomingdale, IL; Havi Logistics, North America, Lisle, IL..., applicable to workers of HAVI Logistics, North America, a subsidiary of HAVI Group, LP, including on-site...

77 FR 42353 - Escalate Capital Partners SBIC I, L.P.; Notice Seeking Exemption Under Section 312 of the Small...

Science.gov (United States)

2012-07-18

... Regulations because Escalate Capital Partners SBIC I, L.P. proposes to Finance a small business in which its... SMALL BUSINESS ADMINISTRATION [License No. 06/06-0335] Escalate Capital Partners SBIC I, L.P.; Notice Seeking Exemption Under Section 312 of the Small Business Investment Act, Conflicts of Interest...

76 FR 17180 - KLH Capital II, L.P.; Notice Seeking Exemption Under Section 312 of the Small Business Investment...

Science.gov (United States)

2011-03-28

... SMALL BUSINESS ADMINISTRATION [License No. 04/04-0296] KLH Capital II, L.P.; Notice Seeking Exemption Under Section 312 of the Small Business Investment Act, Conflicts of Interest Notice is hereby given that KLH Capital, L.P., 101 East Kennedy Boulevard, Suite 3925, Tampa, FL, 33602 a Federal...

Advanced inspection technology for non intrusive inspection (NII) program

International Nuclear Information System (INIS)

Zamir Mohamed Daud

2003-01-01

In the current economic environment, plants and facilities are under pressure to introduced cost saving as well as profit maximising measures. Among the many changes in the way things are run is a move towards Risk Based Inspection (RBI), with an emphasis on longer operating periods between shutdowns as well as to utilise components to their maximum capability. Underpinning and RBI program requires good data from an effective online inspections program, which would not require the shutdown of critical components. One methodology of online inspection is known as Non Intrusive Inspection (NII), an inspection philosophy with the objective of replacing internal inspection of a vessel by doing Non Destructive Testing (NDT) and inspections externally. To this end, a variety of advanced NDT techniques are needed to provide accurate online measurements. (Author)

9 CFR 205.105 - Master list and portion thereof distributed to registrants-format.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Master list and portion thereof distributed to registrants-format. 205.105 Section 205.105 Animals and Animal Products GRAIN INSPECTION... means recording on paper by any technology in a form that can be read by humans without special...

Study on the mechanism and efficiency of simulated annealing using an LP optimization benchmark problem - 113

International Nuclear Information System (INIS)

Qianqian, Li; Xiaofeng, Jiang; Shaohong, Zhang

2010-01-01

Simulated Annealing Algorithm (SAA) for solving combinatorial optimization problems is a popular method for loading pattern optimization. The main purpose of this paper is to understand the underlying search mechanism of SAA and to study its efficiency. In this study, a general SAA that employs random pair exchange of fuel assemblies to search for the optimum fuel Loading Pattern (LP) is applied to an exhaustively searched LP optimization benchmark problem. All the possible LPs of the benchmark problem have been enumerated and evaluated via the use of the very fast and accurate Hybrid Harmonics and Linear Perturbation (HHLP) method, such that the mechanism of SA for LP optimization can be explicitly analyzed and its search efficiency evaluated. The generic core geometry itself dictates that only a small number LPs can be generated by performing random single pair exchanges and that the LPs are necessarily mostly similar to the initial LP. This phase space effect turns out to be the basic mechanism in SAA that can explain its efficiency and good local search ability. A measure of search efficiency is introduced which shows that the stochastic nature of SAA greatly influences the variability of its search efficiency. It is also found that using fuel assembly k-infinity distribution as a technique to filter the LPs can significantly enhance the SAA search efficiency. (authors)

78 FR 32294 - Escalate Capital Partners SBIC I, L.P., License No. 06/06-0335; Notice Seeking Exemption Under...

Science.gov (United States)

2013-05-29

..., Suite 309, Austin, TX 78730. The financing is contemplated to provide working capital. The financing is... SMALL BUSINESS ADMINISTRATION Escalate Capital Partners SBIC I, L.P., License No. 06/06-0335... Notice is hereby given that Escalate Capital Partners, SBIC I, L.P., 300 W. 6th Street, Suite 2250...

76 FR 68803 - Escalate Capital Partners SBIC I, L.P.; Notice Seeking Exemption Under Section 312 of the Small...

Science.gov (United States)

2011-11-07

... Courtyard Drive, Suite 309, Austin, TX 78730. The financing is contemplated to provide working capital and... SMALL BUSINESS ADMINISTRATION [License No. 06/06-0335] Escalate Capital Partners SBIC I, L.P... Notice is hereby given that Escalate Capital Partners, SBIC I, L.P., 300 W. 6th Street, Suite 2250...

Lp(a-cholesterol is associated with HDL-cholesterol in overweight and obese African American children and is not an independent risk factor for CVD

Directory of Open Access Journals (Sweden)

Sharma Sushma

2012-01-01

Full Text Available Abstract Background The role of Lipoprotein (a cholesterol {Lp(a-C}as an additional and/or independent risk factor for cardiovascular disease (CVD is not clear. We evaluated the associations between Lp(a-C and other CVD risk factors including plasma lipoprotein concentrations and body fatness in overweight and obese African American children. Methods A cross-sectional analysis was carried out using data from a sample of 121 African American children aged 9-11 years with Body Mass Index (BMI's greater than the 85th percentile. Body height, weight and waist circumference (WC were measured. Fasting plasma concentrations of Lp(a-C, Total cholesterol (TC, High density lipoprotein cholesterol (HDL-C, Very low density lipoprotein cholesterol (VLDL-C, Intermediate density lipoprotein cholesterol (IDL-C, Low density lipoprotein cholesterol (LDL-C, and Triacylglycerides (TAG were analyzed using the vertical auto profile (VAP cholesterol method. Results After adjusting for child age, gender, and pubertal status, Lp(a-C was positively associated with both HDL-C and TC, and negatively associated with VLDL-C and TAG. Including BMIz and WC as additional covariates did not alter the direction of the relationships between Lp(a-C and the other lipoproteins. Finally, after adjusting for the other plasma lipoproteins, Lp(a-C remained strongly associated with HDL-C, whereas the associations of Lp(a-C with the other lipoproteins were not significant when HDL-C was simultaneously included in the regression models. Conclusions Lp(a-C was positively associated with HDL-C and this association is not influenced by other lipoprotein subclasses or by the degree of obesity. We conclude that Lp(a cholesterol is not an independent risk factor for CVD in African American children.

77 FR 22773 - Texas Eastern Transmission, L.P.; Notice of Response

Science.gov (United States)

2012-04-17

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [ Docket No. RP12-318-001] Texas Eastern... order of the Federal Energy Regulatory Commission in the above- captioned proceeding Texas Eastern Transmission, LP (Texas Eastern) submits its response to show cause why it should not be required to file...

TRAC-PF1 MOD1 post test calculations of the OECD LOFT Experiment LP-SB-1

International Nuclear Information System (INIS)

Allen, E.J.

1990-04-01

Analysis of the small, hot leg break, OECD LOFT Experiment LP-SB-1. using the ''best-estimate'' computer code TRAC-PF1/MOD1 is presented. Descriptions of the LOFT facility and the LP-SB-1 experiment are given and development of the TRAC-PF1/MOD1 input model is detailed. The calculations performed in achieving the steady state conditions, from which the experiment was initiated, and the specification of experimental boundary conditions are outlined. 24 refs., 66 figs., 12 tabs

Calculation of frequency of optimal inspection in non-notice inspection game

International Nuclear Information System (INIS)

Kumakura, Shinichi; Gotoh, Yoshiki; Kikuchi, Masahiro

2011-01-01

We consider a non-notice inspection game between an inspection party, who verifies absence of diversion of nuclear materials and misuse of nuclear facility, and a facility operator, who tries them in a nuclear facility. In the game, the payoff for each player, inspection party and facility operator, is composed of various elements (parameters) such as facility type, a type of nuclear material, number of inspection and others. Their payoffs consist of profits and costs (minus profit). Because of random nature by non-notice inspection, its deterrence effect and inspection number could have the potential to affect their payoffs. In this paper, their payoffs taking into consideration of the inspection environment above are represented as a function of inspection number. Then, the optimal number is calculated from a condition on their payoffs for number of inspection. Comparable statics analysis is performed in order to observe the change of inspection number which is equilibrium point by changing these parameters including deterrence effect, because the number derived depends on each parameter within the inspection environment. Based on the analysis results, necessary conditions to reduce the inspection number keeping inspection effect are pointed out. (author)

Meningococcal Serogroup B Bivalent rLP2086 Vaccine Elicits Broad and Robust Serum Bactericidal Responses in Healthy Adolescents

DEFF Research Database (Denmark)

Vesikari, Timo; Østergaard, Lars Jørgen; Diez-Domingo, Javier

2015-01-01

BACKGROUND: Neisseria meningitidis serogroup B (MnB) is a leading cause of invasive meningococcal disease in adolescents and young adults. A recombinant factor H binding protein (fHBP) vaccine (Trumenba(®); bivalent rLP2086) was recently approved in the United States in individuals aged 10-25 years....... Immunogenicity and safety of 2- or 3-dose schedules of bivalent rLP2086 were assessed in adolescents. METHODS: Healthy adolescents (11 to ... bactericidal antibody assay using human complement (hSBA). Safety assessments included local and systemic reactions and adverse events. RESULTS: Bivalent rLP2086 was immunogenic when administered as 2 or 3 doses; the most robust hSBA responses occurred with 3 doses. The proportion of subjects with hSBA titers...

Håndbog i praktisk hjælp eBog

DEFF Research Database (Denmark)

René, Michael

Håndbog i praktisk hjælp er en opslagsbog med masser af nyttig viden om rengøring, hygiejne og opbevaring af fødevarer. Bogen indeholder afsnit om forskellige rengøringsmidler, om rengøring af forskellige materialer og om fjernelse af pletter, og der er en beskrivelse af forholdsregler i forbinde......://michaelrene.com/forfatter/ Anmeldelse: http://www.michaelrene.com/Munksgaard/AnmeldelseHaandbogIpraktiskhjaelp.png...

Håndbog i praktisk hjælp iBog

DEFF Research Database (Denmark)

René, Michael

Håndbog i praktisk hjælp er en opslagsbog med masser af nyttig viden om rengøring, hygiejne og opbevaring af fødevarer. Bogen indeholder afsnit om forskellige rengøringsmidler, om rengøring af forskellige materialer og om fjernelse af pletter, og der er en beskrivelse af forholdsregler i forbinde......://michaelrene.com/forfatter/ Anmeldelse: http://www.michaelrene.com/Munksgaard/AnmeldelseHaandbogIpraktiskhjaelp.png...

The Leptospiral Antigen Lp49 is a Two-Domain Protein with Putative Protein Binding Function

Energy Technology Data Exchange (ETDEWEB)

Oliveira Giuseppe,P.; Oliveira Neves, F.; Nascimento, A.; Gomes Guimaraes, B.

2008-01-01

Pathogenic Leptospira is the etiological agent of leptospirosis, a life-threatening disease that affects populations worldwide. Currently available vaccines have limited effectiveness and therapeutic interventions are complicated by the difficulty in making an early diagnosis of leptospirosis. The genome of Leptospira interrogans was recently sequenced and comparative genomic analysis contributed to the identification of surface antigens, potential candidates for development of new vaccines and serodiagnosis. Lp49 is a membrane-associated protein recognized by antibodies present in sera from early and convalescent phases of leptospirosis patients. Its crystal structure was determined by single-wavelength anomalous diffraction using selenomethionine-labelled crystals and refined at 2.0 Angstroms resolution. Lp49 is composed of two domains and belongs to the all-beta-proteins class. The N-terminal domain folds in an immunoglobulin-like beta-sandwich structure, whereas the C-terminal domain presents a seven-bladed beta-propeller fold. Structural analysis of Lp49 indicates putative protein-protein binding sites, suggesting a role in Leptospira-host interaction. This is the first crystal structure of a leptospiral antigen described to date.

National Program for Inspection of Non-Federal Dams. Shenipsit Dam (CT 00482), Thames River Basin, Stafford, Connecticut. Phase I Inspection Report.

Science.gov (United States)

1980-09-01

calculatec by the Soil Loss Formula (0.1 ton/ac/yr. y±cld). The dosianed heiGht of the structures vill provide st rage for a 50 year sediment...As shown in the above listing the design meet, the c:rr,1 ,ia established in all instances. L B-13 rage -,- n We have discussed with the S. C.S...WALTHAM,* MASS rMdlRie INSPECTION OF Stafford, CT CANIN ENGINEERS INC. WALLINGFORD, CON.NF. DAS CE# 27 785 KC EWNGINEER NO-FD AS DATE Set𔃺 PAGE C-4 S S U

Safety analysis report: packages. LP-50 tritium package (packaging of fissile and other radioactive materials). Final report

International Nuclear Information System (INIS)

Gates, A.A.; McCarthy, P.G.; Edl, J.W.

1975-04-01

Elemental tritium is shipped at low pressure in a stainless steel container (LP-50) sealed within an aluminum vessel and surrounded by a minimum of 4-in. thick Celotex insulation in a steel drum. The structural, thermal, containment, shielding, and criticality safety aspects of this package are evaluated. Procedures for loading and unloading, empty cask transport, acceptance testing and maintenance, and quality assurance requirements for the LP-50 package are described in detail. (U.S.)

Meat inspection for Trichinella in pork, horsemeat and game within the EU: available technology and its present implementation.

Science.gov (United States)

Webster, P; Maddox-Hyttel, C; Nöckler, K; Malakauskas, A; van der Giessen, J; Pozio, E; Boireau, P; Kapel, C M O

2006-01-01

A new EU directive relating to meat inspection for Trichinella, expected to come into force in 2006, imposes important modifications to current legislation. Nevertheless, several issues need more attention. Optimisation of methods, especially concerning sensitivity and digestibility of the meat to be inspected, along with further simplification of the legislation with regard to the number of techniques accepted, is recommended to guarantee that all member states of the EU will be given tools to perform inspection of consumer meat at the same high level. Additionally, there is a need for guidelines and protocols regarding optimal proficiency testing procedures. This paper presents an overview of the current methods for Trichinella meat inspection and their implementation in the EU, listing advantages and disadvantages for each method, including some suggestions for specific points of improvement.

76 FR 65935 - Brucellosis in Swine; Add Texas to List of Validated Brucellosis-Free States

Science.gov (United States)

2011-10-25

... DEPARTMENT OF AGRICULTURE Animal and Plant Health Inspection Service 9 CFR Part 78 [Docket No. APHIS-2011-0005] Brucellosis in Swine; Add Texas to List of Validated Brucellosis- Free States AGENCY... or birth of weak offspring, reduced milk production, and infertility. There is no economically...

Training Lp norm multiple kernel learning in the primal.

Science.gov (United States)

Liang, Zhizheng; Xia, Shixiong; Zhou, Yong; Zhang, Lei

2013-10-01

Some multiple kernel learning (MKL) models are usually solved by utilizing the alternating optimization method where one alternately solves SVMs in the dual and updates kernel weights. Since the dual and primal optimization can achieve the same aim, it is valuable in exploring how to perform Lp norm MKL in the primal. In this paper, we propose an Lp norm multiple kernel learning algorithm in the primal where we resort to the alternating optimization method: one cycle for solving SVMs in the primal by using the preconditioned conjugate gradient method and other cycle for learning the kernel weights. It is interesting to note that the kernel weights in our method can obtain analytical solutions. Most importantly, the proposed method is well suited for the manifold regularization framework in the primal since solving LapSVMs in the primal is much more effective than solving LapSVMs in the dual. In addition, we also carry out theoretical analysis for multiple kernel learning in the primal in terms of the empirical Rademacher complexity. It is found that optimizing the empirical Rademacher complexity may obtain a type of kernel weights. The experiments on some datasets are carried out to demonstrate the feasibility and effectiveness of the proposed method. Copyright © 2013 Elsevier Ltd. All rights reserved.

Spatiotemporal profiles of receptive fields of neurons in the lateral posterior nucleus of the cat LP-pulvinar complex.

Science.gov (United States)

Piché, Marilyse; Thomas, Sébastien; Casanova, Christian

2015-10-01

The pulvinar is the largest extrageniculate thalamic visual nucleus in mammals. It establishes reciprocal connections with virtually all visual cortexes and likely plays a role in transthalamic cortico-cortical communication. In cats, the lateral posterior nucleus (LP) of the LP-pulvinar complex can be subdivided in two subregions, the lateral (LPl) and medial (LPm) parts, which receive a predominant input from the striate cortex and the superior colliculus, respectively. Here, we revisit the receptive field structure of LPl and LPm cells in anesthetized cats by determining their first-order spatiotemporal profiles through reverse correlation analysis following sparse noise stimulation. Our data reveal the existence of previously unidentified receptive field profiles in the LP nucleus both in space and time domains. While some cells responded to only one stimulus polarity, the majority of neurons had receptive fields comprised of bright and dark responsive subfields. For these neurons, dark subfields' size was larger than that of bright subfields. A variety of receptive field spatial organization types were identified, ranging from totally overlapped to segregated bright and dark subfields. In the time domain, a large spectrum of activity overlap was found, from cells with temporally coinciding subfield activity to neurons with distinct, time-dissociated subfield peak activity windows. We also found LP neurons with space-time inseparable receptive fields and neurons with multiple activity periods. Finally, a substantial degree of homology was found between LPl and LPm first-order receptive field spatiotemporal profiles, suggesting a high integration of cortical and subcortical inputs within the LP-pulvinar complex. Copyright © 2015 the American Physiological Society.

Pathology Residents Comprise Inspection Team for a CAP Self-Inspection

Directory of Open Access Journals (Sweden)

Stacy G. Beal MD

2017-03-01

Full Text Available We report our experience at the University of Florida in which residents and fellows served as the inspection team for a College of American Pathologists (CAP self-inspection. We aimed to determine whether the CAP self-inspection could serve as a learning opportunity for pathology residents and fellows. To prepare for the inspection, we provided a series of 4 lunchtime seminars covering numerous laboratory management topics relating to inspections and laboratory quality. Preparation for the inspection began approximately 4 months prior to the date of the inspection. The intent was to simulate a CAP peer inspection, with the exception that the date was announced. The associate residency program director served as the team leader. All residents and fellows completed inspector training provided by CAP, and the team leader completed the team leader training. A 20 question pre- and posttest was administered; additionally, an anonymous survey was given after the inspection. The residents’ and fellows’ posttest scores were an average of 15% higher than on the pretest ( P < .01. The surveys as well as subjective comments were overwhelmingly positive. In conclusion, the resident’s and fellow’s experience as an inspector during a CAP self-inspection was a useful tool to learn accreditation and laboratory management.

LP turbine retrofit modernization: Improvements in performance and operation

International Nuclear Information System (INIS)

Groenedaal, J.C.; Fowls, L.G.; Subbiah, R.; Maxwell, B.P.; Persson, B.

1996-01-01

Westinghouse Electric Corporation retrofitted six low pressure (LP) nuclear turbine rotors and associated blade path components at Ringhals 1, a 1960's vintage English Electric (GEC) unit located near Varobacka, Sweden, and operated by Vattenfall AB. This achieved significant performance improvements and provided improved mechanical features over the original equipment. This paper, discusses design, manufacture, installation, operation and project coordination. The retrofit processes employed for these units can be applied to any potential customers units

A comparison of P-3 and LP-3 distribution of peak floods at guddu barrage on indus river

International Nuclear Information System (INIS)

Memon, A.G.

2007-01-01

In this paper P-3 (Pearson-3) and LP-3 (Log-Pearson-3) distributions are fitted on the data of flood peaks at Guddu, for 38 years (1962-1999), Using three methods of estimation namely MOM (Method Of Moments), KLM (Maximum Likelihood Method) and PWM (Power weighted moment). LP-3 distribution appears to be appropriate for modeling the flood data on the basis of i-test, S-K (Simirnov- Kolmogrov) test, Cs (Coefficient of Skewness), RMSE (Root Mean Square Errors), PPCC (Probability Plot Correlation Coefficient) and L-Moment Ratios. MLM is found to be the efficient method. 1.52 million cusecs flood is expected to arrive at Guddu barrage, during next 100 years, when LP-3 distribution is fitted by MLM, i.e. 37% more than its designed capacity of 1.1 million cusecs. (author)

Bivalent rLP2086 Vaccine (Trumenba(®)): A Review in Active Immunization Against Invasive Meningococcal Group B Disease in Individuals Aged 10-25 Years.

Science.gov (United States)

Shirley, Matt; Dhillon, Sohita

2015-10-01

Bivalent rLP2086 vaccine (Trumenba(®)) [hereafter referred to as rLP2086] is a Neisseria meningitidis serogroup B (MenB) vaccine recently licensed in the USA for active immunization to prevent invasive disease caused by MenB in individuals 10-25 years of age. rLP2086, which contains two variants of the meningococcal surface protein factor H-binding protein (fHBP), was approved by the FDA under the accelerated approval pathway after the immunogenicity of the vaccine was demonstrated in several phase II trials. This article reviews the immunogenicity and reactogenicity of rLP2086 as demonstrated in the trials with a focus on the US setting and on use of the vaccine as per FDA-approved labeling. rLP2086 is approved in the USA as a three-dose series administered in a 0-, 2-, and 6-month schedule. In the phase II trials, rLP2086 elicited a robust immune response against a panel of MenB test strains. A strong immune response was evident in a marked proportion of subjects after two vaccine doses, with a further increase after a third dose. The four primary test strains used were selected to be representative of MenB strains prevalent in the USA, with each expressing an fHBP variant heterologous to the vaccine antigens. rLP2086 was generally well tolerated in the trials, with most adverse reactions being mild to moderate in severity. Although some questions remain, including the duration of the protective response, rLP2086 vaccine has the potential to be a valuable tool for the prevention of invasive MenB disease.

LpMab-12 Established by CasMab Technology Specifically Detects Sialylated O-Glycan on Thr52 of Platelet Aggregation-Stimulating Domain of Human Podoplanin.

Directory of Open Access Journals (Sweden)

Yukinari Kato

Full Text Available Podoplanin (PDPN, also known as Aggrus, possesses three tandem repeat of platelet aggregation-stimulating (PLAG domains in its N-terminus. Among the PLAG domains, sialylated O-glycan on Thr52 of PLAG3 is essential for the binding to C-type lectin-like receptor-2 (CLEC-2 and the platelet-aggregating activity of human PDPN (hPDPN. Although various anti-hPDPN monoclonal antibodies (mAbs have been generated, no specific mAb has been reported to target the epitope containing glycosylated Thr52. We recently established CasMab technology to develop mAbs against glycosylated membrane proteins. Herein, we report the development of a novel anti-glycopeptide mAb (GpMab, LpMab-12. LpMab-12 detected endogenous hPDPN by flow cytometry. Immunohistochemical analyses also showed that hPDPN-expressing lymphatic endothelial and cancer cells were clearly labeled by LpMab-12. The minimal epitope of LpMab-12 was identified as Asp49-Pro53 of hPDPN. Furthermore, LpMab-12 reacted with the synthetic glycopeptide of hPDPN, corresponding to 38-54 amino acids (hpp3854: 38-EGGVAMPGAEDDVVTPG-54, which carries α2-6 sialylated N-acetyl-D-galactosamine (GalNAc on Thr52. LpMab-12 did not recognize non-sialylated GalNAc-attached glycopeptide, indicating that sialylated GalNAc on Thr52 is necessary for the binding of LpMab-12 to hPDPN. Thus, LpMab-12 could serve as a new diagnostic tool for determining whether hPDPN possesses the sialylation on Thr52, a site-specific post-translational modification critical for the hPDPN association with CLEC-2.

Vision and Control for UAVs: A Survey of General Methods andof Inexpensive Platforms for Infrastructure Inspection

Directory of Open Access Journals (Sweden)

Koppány Máthé

2015-06-01

Full Text Available Unmanned aerial vehicles (UAVs have gained significant attention in recent years. Low-cost platforms using inexpensive sensor payloads have been shown to provide satisfactory flight and navigation capabilities. In this report, we survey vision and control methods that can be applied to low-cost UAVs, and we list some popular inexpensive platforms and application fields where they are useful. We also highlight the sensor suites used where this information is available. We overview, among others, feature detection and tracking, optical flow and visual servoing, low-level stabilization and high-level planning methods. We then list popular low-cost UAVs, selecting mainly quadrotors. We discuss applications, restricting our focus to the field of infrastructure inspection. Finally, as an example, we formulate two use-cases for railway inspection, a less explored application field, and illustrate the usage of the vision and control techniques reviewed by selecting appropriate ones to tackle these use-cases. To select vision methods, we run a thorough set of experimental evaluations.

76 FR 17180 - C3 Capital Partners II, L.P.; Notice Seeking Exemption Under 312 of the Small Business Investment...

Science.gov (United States)

2011-03-28

... SMALL BUSINESS ADMINISTRATION [License No. 07/07-0113] C3 Capital Partners II, L.P.; Notice Seeking Exemption Under 312 of the Small Business Investment Act, Conflicts of Interest Notice is hereby given that C3 Capital Partners IT, L.P., 4520 Main Street, Suite 1600, Kansas City, Missouri, 64111-7700...

77 FR 5613 - C3 Capital Partners II, L.P.; Notice Seeking Exemption Under 312 of the Small Business Investment...

Science.gov (United States)

2012-02-03

... SMALL BUSINESS ADMINISTRATION [License No. 07/07-0113] C3 Capital Partners II, L.P.; Notice Seeking Exemption Under 312 of the Small Business Investment Act, Conflicts of Interest Notice is hereby given that C3 Capital Partners II, L.P., 4520 Main Street, Suite 1600, Kansas City, Missouri 64111-7700...

Serum LP(A) levels in randomized healthy men from different European countries

NARCIS (Netherlands)

Cigolini, M; Seidell, J C; Zenti, M G; Bonadonna, G; Zambelli, L; Deslypere, J P; Contaldo, F; Cruz, A.; Charzewska, J; Targher, G

Serum lipoprotein(a) [Lp(a)], blood lipids, serum insulin and anthropometric parameters were determined in randomized samples of 38-year-old men living in six European cities: Ede (The Netherlands), Deinze (Belgium), Warsaw (Poland), Lumiar (Portugal), Verona and Naples (respectively in northern and

On Some Isomorphisms between Bounded Linear Maps and Non-Commutative Lp-Spaces

Directory of Open Access Journals (Sweden)

E. J. Atto

2014-04-01

Full Text Available We define a particular space of bounded linear maps using a Von Neumann algebra and some operator spaces. By this, we prove some isomorphisms, and using interpolation in some particular cases, we get analogue of non-commutative Lp spaces.

Ultrasonic inspection

International Nuclear Information System (INIS)

Satittada, Gannaga

1984-01-01

Ultrasonic inspection is one of the most widely used methods for nondestructive inspection. The beam of high-frequency sound wave, ultrasonic wave, is introduced into the material. It travels through the material with some attendant loss of energy and can be reflected at interfaces. The reflected beam is detected and analyzed. Ultrasonic inspection is used to detect flaws in metal parts as well as in welded, brazed and bonded joints during research work and developing production and service. It is also used to detect and locate porosity, pipe, and flakes. In addition, it can be used for the measurement of metal thickness. Ultrasonic inspection is therefore used for quality control and material inspection in all major industries

SmartInspect: Smart Contract Inspection Technical Report

OpenAIRE

Bragagnolo , Santiago; Rocha , Henrique ,; Denker , Marcus; Ducasse , Stéphane

2017-01-01

Smart contracts are embedded procedures stored with the data they act upon. Debugging deployed Smart Contracts is a difficult task since once deployed, the code cannot be reexecuted and inspecting a simple attribute is not easily possible because data is encoded. In this technical report, we present SmartInspect to address the lack of inspectability of a deployed contract. Our solution analyses the contract state by using decompilation techniques and a mirror-based architecture to represent t...

Comparison of Lp(a) concentrations and some potential effects in hemodialysis, CAPD, transplantation, and control groups, and review of the literature.

Science.gov (United States)

Gault, M H; Longerich, L L; Purchase, L; Harnett, J; Breckenridge, C

1995-01-01

Apolipoprotein (a)-Lp(a)-is reported to be an independent risk factor for coronary artery disease and for hemodialysis (HD) access occlusion. Homology with plasminogen may predispose to thrombosis. High concentrations usually have been reported in patients on HD and on continuous ambulatory peritoneal dialysis (CAPD), but near-normal values in many kidney transplants (TP). We used Pharmacia immunoradiometric assay in 52 patients on HD, 58 on CAPD, 94 after TP, and 56 controls. The Lp(a) mean levels for CAPD, HD, TP, and control groups were 738, 647, 348, and 368 U/l and the medians were 542, 537, 96 and 143 U/l, respectively. The means and medians for CAPD and HD were significantly greater than those for TP and controls (p fall 77%). The dominant Apo(a) isoform in 10 of 13 patients on CAPD or HD with high Lp(a) values was the equivalent of S2 (Utermann). Lp(a) in HD or CAPD is often elevated and regulated by both genetic and renal failure factors, but falls after TP with return of renal function and mainly genetic regulation. Lp(a) was not a risk factor for coronary artery disease in HD or CAPD patients and did not fall significantly with two drugs or diet.

Long-reach articulated robots for inspection and mini-invasive interventions in hazardous environments: Recent robotics research, qualification testing, and tool developments

International Nuclear Information System (INIS)

Perrot, Yann; Kammerer, Nolwenn; Measson, Yvan; Verney, Alexandre; Gargiulo, Laurent; Houry, Michael; Keller, Delphine; Piolain, Gerard

2012-01-01

The Interactive Robotics Laboratory of CEA LIST is in charge of the development of remote handling technologies to meet energy industry requirements. This paper reports the research and development activities in advanced robotics systems for inspection or light intervention in hazardous environments with limited access such as blind hot cells in the nuclear industry or the thermonuclear experimental Tokamak fusion reactor. A long-reach carrier robot called the articulated inspection arm (AIA) and diagnostics and tools for inspection or intervention are described. Finally experimental field tests are presented and actual challenges in modeling the robot's flexibilities are discussed. (authors)

Prospects for CW and LP operation of the European XFEL in hard X-ray regime

International Nuclear Information System (INIS)

Brinkmann, R.; Schneidmiller, E.A.; Sekutowicz, J.; Yurkov, M.V.

2014-03-01

The European XFEL will operate nominally at 17.5 GeV in SP (short pulse) mode with 0.65 ms long bunch train and 10 Hz repetition rate. A possible upgrade of the linac to CW (continuous wave) or LP (long pulse) modes with a corresponding reduction of electron beam energy is under discussion since many years. Recent successes in the dedicated R and D program allow to forecast a technical feasibility of such an upgrade in the foreseeable future. One of the challenges is to provide sub-Aangstrom FEL operation in CW and LP modes. In this paper we perform a preliminary analysis of a possible operation of the European XFEL in the hard X-ray regime in CW and LP modes with the energies of 7 GeV and 10 GeV, respectively. We consider lasing in the baseline XFEL undulator as well as in a new undulator with a reduced period. We show that, with reasonable requirements on electron beam quality, lasing on the fundamental will be possible in sub-Aangstrom regime. As an option for generation of brilliant photon beams at short wavelengths we also consider harmonic lasing that has recently attracted a significant attention.

Comparative Genomic Analysis of Lactobacillus plantarum GB-LP1 Isolated from Traditional Korean Fermented Food.

Science.gov (United States)

Yu, Jihyun; Ahn, Sojin; Kim, Kwondo; Caetano-Anolles, Kelsey; Lee, Chanho; Kang, Jungsun; Cho, Kyungjin; Yoon, Sook Hee; Kang, Dae-Kyung; Kim, Heebal

2017-08-28

As probiotics play an important role in maintaining a healthy gut flora environment through antitoxin activity and inhibition of pathogen colonization, they have been of interest to the medical research community for quite some time now. Probiotic bacteria such as Lactobacillus plantarum , which can be found in fermented food, are of particular interest given their easy accessibility. We performed whole-genome sequencing and genomic analysis on a GB-LP1 strain of L. plantarum isolated from Korean traditional fermented food; this strain is well known for its functions in immune response, suppression of pathogen growth, and antitoxin effects. The complete genome sequence of GB-LP1 is a single chromosome of 3,040,388 bp with 2,899 predicted open reading frames. Genomic analysis of GB-LP1 revealed two CRISPR regions and genes showing accelerated evolution, which may have antibiotic and antitoxin functions. The aim of the present study was to predict strain specific-genomic characteristics and assess the potential of this new strain as lactic acid bacteria at the genomic level using in silico analysis. These results provide insight into the L. plantarum species as well as confirm the possibility of its utility as a candidate probiotic.

Prospects for CW and LP operation of the European XFEL in hard X-ray regime

Energy Technology Data Exchange (ETDEWEB)

Brinkmann, R.; Schneidmiller, E.A.; Sekutowicz, J.; Yurkov, M.V.

2014-03-15

The European XFEL will operate nominally at 17.5 GeV in SP (short pulse) mode with 0.65 ms long bunch train and 10 Hz repetition rate. A possible upgrade of the linac to CW (continuous wave) or LP (long pulse) modes with a corresponding reduction of electron beam energy is under discussion since many years. Recent successes in the dedicated R and D program allow to forecast a technical feasibility of such an upgrade in the foreseeable future. One of the challenges is to provide sub-Aangstrom FEL operation in CW and LP modes. In this paper we perform a preliminary analysis of a possible operation of the European XFEL in the hard X-ray regime in CW and LP modes with the energies of 7 GeV and 10 GeV, respectively. We consider lasing in the baseline XFEL undulator as well as in a new undulator with a reduced period. We show that, with reasonable requirements on electron beam quality, lasing on the fundamental will be possible in sub-Aangstrom regime. As an option for generation of brilliant photon beams at short wavelengths we also consider harmonic lasing that has recently attracted a significant attention.

RPII Inspection and Licensing Activities and Annual Inspection Programme for 2011

International Nuclear Information System (INIS)

2010-07-01

The objective of this report is to provide an overview of inspection activities of the Radiological Protection Institute of Ireland, to examine the evolution in licensee numbers and to outline the rationale in developing annual inspection programmes. All inspection activities are now carried out within the framework of a quality management system including: inspection planning, the training of inspectors, the conduct of inspections as well as inspection follow up and review. The report also provides an overview of the main features of the quality system

RPII Inspection and Licensing Activities and Annual Inspection Programme for 2013

International Nuclear Information System (INIS)

2013-04-01

The objective of this report is to provide an overview of inspection activities of the Radiological Protection Institute of Ireland RPII, to examine the evolution in licensee numbers and to outline the rationale in developing annual inspection programmes. All inspection activities are now carried out within the framework of a quality management system including inspection planning, the training of inspectors, the conduct of inspections as well as post inspection follow up and review. This report also provides an overview of the main features of the quality system

Development of an ITER relevant inspection robot

Energy Technology Data Exchange (ETDEWEB)

Gargiulo, L.; Bayetti, P.; Cordier, J.J.; Grisolia, C.; Hatchressian, J.C. [Association Euratom-CEA, Cadarache (France). Dept. de Recherche sur la Fusion Controlee; Friconneau, J.P.; Keller, D.; Perrot, Y. [CEA-LIST Robotics and Interactive Systems Unit, Fontenay aux Roses (France)

2007-07-01

Robotic operations are one of the major maintenance challenges for ITER and future fusion reactors. In particular, in vessel inspection operations without loss of conditioning could be very useful. Within this framework, the aim of the project called AIA (Articulated Inspection Arm) is to demonstrate the feasibility of a multi-purpose in-vessel Remote Handling inspection system using a long reach, limited payload carrier (up to 10 kg). It is composed of 5 segments with 11 degrees of freedom and a total range of 8 m. The project is currently developed by the CEA within the European workprogramme. Its first in situ tests are planned this summer on the Tore Supra tokamak at Cadarache (France). They will validate chosen concepts for operations under ITER relevant vacuum and temperature conditions. After qualification, the arm will constitute a promising tool for generic application. Several processes are already considered for ITER maintenance and will be demonstrated on the AIA robot carrier: - The first embedded process is the viewing system. It is currently being manufactured and will allow for close visual inspection of the complex Plasma Facing Components (limiters, neutralisers, RF antennae, diagnostic windows, etc.). - In situ localisation of leakage based on helium sniffer is also studied to improve maintenance operations. - Finally the laser ablation system for PFC detritiation, also developed in CEA laboratories, is being fitted to be implanted into the robot and put into operation in Tore Supra. This paper deals with the integration of the robot in the Tore Supra tokamak and the advances in the development of the listed processes. It also introduces the current test campaign aiming to qualify the robot performance and reliability under vacuum and temperature conditions. (orig.)

Development of an ITER relevant inspection robot

Energy Technology Data Exchange (ETDEWEB)

Gargiulo, Laurent [Association Euratom-CEA, Departement de Recherche sur la Fusion Controlee, CE Cadarache 13108 (France)], E-mail: laurent.gargiulo@cea.fr; Bayetti, Pascal; Bruno, Vincent; Cordier, Jean-Jacques [Association Euratom-CEA, Departement de Recherche sur la Fusion Controlee, CE Cadarache 13108 (France); Friconneau, Jean-Pierre [CEA-LIST Robotics and Interactive Systems Unit, CE Fontenay Aux Roses (France); Grisolia, Christian; Hatchressian, Jean-Claude; Houry, Michael [Association Euratom-CEA, Departement de Recherche sur la Fusion Controlee, CE Cadarache 13108 (France); Keller, Delphine; Perrot, Yann [CEA-LIST Robotics and Interactive Systems Unit, CE Fontenay Aux Roses (France)

2008-12-15

Robotic operations are one of the major maintenance challenges for ITER and future fusion reactors. In particular, in-vessel inspection operations without loss of conditioning will be mandatory. In this context, an Articulated Inspection Arm (AIA) is currently developed by the CEA within the European work programme framework, which aims at demonstrating the feasibility of a multi-purpose in-vessel Remote Handling inspection system using a long reach, limited payload carrier (up to 10 kg). It is composed of 5 segments with 8 degrees of freedom and a total range of 8 m. The first in situ tests will take place by the end of 2007 on the Tore Supra Tokamak at Cadarache (France). They will validate concepts for operations under ITER relevant vacuum and temperature conditions. After qualification, the arm will constitute a promising tool for various applications. Several processes are already considered for ITER maintenance and will be demonstrated on the AIA robot carrier: - The first embedded process is the viewing system. It is already manufactured and will allow close visual inspection of the complex Plasma Facing Components (PFC) (limiters, neutralisers, RF antenna, diagnostic windows, etc.). - In situ localisation of water leakage based on a helium sniffing system is also being studied to improve and facilitate maintenance operations. - Finally a laser ablation system for PFC detritiation, developed in CEA laboratories, is being fitted to be implemented on the robot for future operation in Tore Supra. This paper deals with the integration of the robot into Tore Supra and the progress in the development of the processes listed above. It also describes the current test campaign aiming to qualify the robot performance and reliability under vacuum and temperature conditions.

Development of an ITER relevant inspection robot

International Nuclear Information System (INIS)

Gargiulo, L.; Bayetti, P.; Cordier, J.J.; Grisolia, C.; Hatchressian, J.C.

2007-01-01

Robotic operations are one of the major maintenance challenges for ITER and future fusion reactors. In particular, in vessel inspection operations without loss of conditioning could be very useful. Within this framework, the aim of the project called AIA (Articulated Inspection Arm) is to demonstrate the feasibility of a multi-purpose in-vessel Remote Handling inspection system using a long reach, limited payload carrier (up to 10 kg). It is composed of 5 segments with 11 degrees of freedom and a total range of 8 m. The project is currently developed by the CEA within the European workprogramme. Its first in situ tests are planned this summer on the Tore Supra tokamak at Cadarache (France). They will validate chosen concepts for operations under ITER relevant vacuum and temperature conditions. After qualification, the arm will constitute a promising tool for generic application. Several processes are already considered for ITER maintenance and will be demonstrated on the AIA robot carrier: - The first embedded process is the viewing system. It is currently being manufactured and will allow for close visual inspection of the complex Plasma Facing Components (limiters, neutralisers, RF antennae, diagnostic windows, etc.). - In situ localisation of leakage based on helium sniffer is also studied to improve maintenance operations. - Finally the laser ablation system for PFC detritiation, also developed in CEA laboratories, is being fitted to be implanted into the robot and put into operation in Tore Supra. This paper deals with the integration of the robot in the Tore Supra tokamak and the advances in the development of the listed processes. It also introduces the current test campaign aiming to qualify the robot performance and reliability under vacuum and temperature conditions. (orig.)

Development of an ITER relevant inspection robot

International Nuclear Information System (INIS)

Gargiulo, Laurent; Bayetti, Pascal; Bruno, Vincent; Cordier, Jean-Jacques; Friconneau, Jean-Pierre; Grisolia, Christian; Hatchressian, Jean-Claude; Houry, Michael; Keller, Delphine; Perrot, Yann

2008-01-01

Robotic operations are one of the major maintenance challenges for ITER and future fusion reactors. In particular, in-vessel inspection operations without loss of conditioning will be mandatory. In this context, an Articulated Inspection Arm (AIA) is currently developed by the CEA within the European work programme framework, which aims at demonstrating the feasibility of a multi-purpose in-vessel Remote Handling inspection system using a long reach, limited payload carrier (up to 10 kg). It is composed of 5 segments with 8 degrees of freedom and a total range of 8 m. The first in situ tests will take place by the end of 2007 on the Tore Supra Tokamak at Cadarache (France). They will validate concepts for operations under ITER relevant vacuum and temperature conditions. After qualification, the arm will constitute a promising tool for various applications. Several processes are already considered for ITER maintenance and will be demonstrated on the AIA robot carrier: - The first embedded process is the viewing system. It is already manufactured and will allow close visual inspection of the complex Plasma Facing Components (PFC) (limiters, neutralisers, RF antenna, diagnostic windows, etc.). - In situ localisation of water leakage based on a helium sniffing system is also being studied to improve and facilitate maintenance operations. - Finally a laser ablation system for PFC detritiation, developed in CEA laboratories, is being fitted to be implemented on the robot for future operation in Tore Supra. This paper deals with the integration of the robot into Tore Supra and the progress in the development of the processes listed above. It also describes the current test campaign aiming to qualify the robot performance and reliability under vacuum and temperature conditions

Inspection vehicle

International Nuclear Information System (INIS)

Takahashi, Masaki; Omote, Tatsuyuki; Yoneya, Yutaka; Tanaka, Keiji; Waki, Tetsuro; Yoshida, Tomiji; Kido, Tsuyoshi.

1993-01-01

An inspection vehicle comprises a small-sized battery directly connected with a power motor or a direct power source from trolly lines and a switching circuit operated by external signals. The switch judges advance or retreat by two kinds of signals and the inspection vehicle is recovered by self-running. In order to recover the abnormally stopped inspection vehicle to the targeted place, the inspection vehicle is made in a free-running state by using a clutch mechanism and is pushed by an other vehicle. (T.M.)

Pre-service inspection and in-service inspection in Japan

International Nuclear Information System (INIS)

Uebayashi, T.; Miyake, Y.

1985-01-01

To ensure the safety of nuclear power plant, pre-service inspection/in-service inspection (PSI/ISI) has an important role, and informations obtained from various inspections during plant shut-down period are contributing to establish effective preventive maintenance activities for plant facilities. It might be said that the high level of availability of Japanese light-water nuclear power plants in these two or three years has been achieved by those efforts. In case of Japan, inspections to be carried out during scheduled plant shut-down period are not limited to code requirements but include many other inspections which are mostly reflected from troubles experienced in both domestic and overseas plants. Usually, those additional inspections are performed by Ministry of Trade and Industries' (MITI's) regulator and/or tentative requirement and considered as ISI in broad meaning. To achieve high availability of plant, it is essential to avoid unscheduled shut-down and to shorten inspection period. The developments of new technology to perform effective ISI for operating plants are continued, but on the other hand it is also very important to pay a great consideration to inspectability of the plants at the stage of plant engineering. With the leadership of MITI, improvement and standardization of light-water nuclear power plant has been proceeded and newly constructed plants have great advantage from the point of view on ISI

Beltzville Lake Condition Report, Dam, Outlet Works and Spillway, Periodic Inspection Reports Number 3 and 4, September 1972 and August 1973.

Science.gov (United States)

1974-06-01

Service Bridge 34 Elevation and Structural Details - Spillway Bridge Appendix B List of Attendees - Periodic Inspections Nos. 3 & 4 0 d U c 0 0 4) ) W S...pressure cells with Casagrande- type open piezometers since these instruments appear to provide more serviceability and reliability. .1it. the exception of...ir.stallation of ten additional surface settlement pipes was recommetded 1-.-d adopted. in a. ,(,- lance with the inspection recommended in Fesign Yemorandlur c

Regulatory inspection practices for industrial safety (electrical, mechanical, material handling and conventional aspects)

International Nuclear Information System (INIS)

Agarwal, K.

2017-01-01

Regulatory Inspection (RI) of BARC facilities and projects are carried out under the guidance of BARC Safety Council (BSC) Secretariat. Basically facilities and projects have been divided into two board categories viz. radiological facilities and non-radiological facilities. The Rls of radiological facilities should be carried out under OPSRC and of non-radiological facilities under CFSRC. Periodicity of inspection shall be at least once in a year. The RI of projects is carried out under concerned DSRC. RI practices with industrial safety which includes electrical, mechanical, material handling and conventional aspect for these facilities starts with check lists. The inspection areas are prepared in the form of checklists which includes availability of approved documents, compliance status of previous RIT and various safety committee's recommendations, radiological status of facilities, prompt reporting of safety related unusual occurrences, major incident, site visit for verification of actual status of system/plant. The practices for inspection in the area of electrical safety shall include checking of maintenance procedure for all critical class IV system equipment's such as HT panel, LT panel, transformer and motors. Load testing of Class III system such as D.G. set etc. shall be carried out as technical specification surveillance schedule. Status of aviation lights, number of qualified staff, availability of qualified staff etc. shall be form of inspection

75 FR 6200 - Equitrans, L.P.; Notice of Request Under Blanket Authorization

Science.gov (United States)

2010-02-08

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. CP10-46-000] Equitrans, L.P..., Monongalia, and Wetzel Counties, West Virginia and to make certain modifications to compressor engines at [email protected] or call toll-free, (866) 208-3676 or TTY, (202) 502-8659. Specifically, Equitrans...

76 FR 61682 - Panhandle Eastern Pipe Line Company, LP; Notice of Application

Science.gov (United States)

2011-10-05

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. CP11-546-000] Panhandle Eastern Pipe Line Company, LP; Notice of Application On September 16, 2011, Panhandle Eastern Pipe Line... free). For TTY, call (202) 502-8659. Comment Date: 5 p.m. Eastern Time on October 19, 2011. Dated...

LP-THAE induced tumor cell apoptosis of rabbit VX2 liver carcinoma

International Nuclear Information System (INIS)

Chen Shengli; Quan Yi; Huang Zicheng; Chen Guodong; Zhu Dongliang

2007-01-01

Objective: To research tumor cell apoptosis induced by Lp-THAE of rabbit VX2 liver implanted tumor. Methods: 27 New Zealand white rabbits implanted with VX2 tumor at left middle lobe of the liver divided into three groups: Group A(n= 9) Lp-THAE: treated through transhepatic artery catheterization; Group B(n=9) THAI and Group C(n=9) as control. The rabbits were executed at second to fifth day after treatment. HE dye microscopy was taken for counting the typical apoptosis cells and calculating apoptosis index (ApI). FITC-AnnexinV/PI assay was used for measuring apoptosis by flow cytometry. Results: The ApI of tumor central area and marginal area were (17.769±2.417)%, (4.129±1.172)%, P<0.01. The percentages of tumor cell apoptosis and tumor cell necrosis were (16.483±1.404)%, (9.478±0.964)%, P<0.01 and (43.559±5.053)%, (33.460±1.840)%, P=0.093. The total percentages of tumor cell apoptosis and necrosis were (60.042±13.979)%, (42.938±8.979)%, P< 0.01, at tumor center and marginal area in THAE group respectively. The ApI, percentages of tumor cell apoptosis and necrosis in THAE group were significantly higher than those of THAI group (P<0.01). The percentages of tumor cell apoptosis at tumor center area in THAE group were significantly higher than those of tumor marginal area(P<0.01). Conclusion: Induced tumor cell apoptosis and necrosis are two mechanisms of action for Lp-THAE treatment of liver carcinoma. (authors)

Optimal design for crosstalk analysis in 12-core 5-LP mode homogeneous multicore fiber for different lattice structure

Science.gov (United States)

Kumar, Dablu; Ranjan, Rakesh

2018-03-01

12-Core 5-LP mode homogeneous multicore fibers have been proposed for analysis of inter-core crosstalk and dispersion, with four different lattice structures (circular, 2-ring, square lattice, and triangular lattice) having cladding diameter of 200 μm and a fixed cladding thickness of 35 μm. The core-to-core crosstalk impact has been studied numerically with respect to bending radius, core pitch, transmission distance, wavelength, and core diameter for all 5-LP modes. In anticipation of further reduction in crosstalk levels, the trench-assisted cores have been incorporated for all respective designs. Ultra-low crosstalk (-138 dB/100 km) has been achieved through the triangular lattice arrangement, with trench depth Δ2 = -1.40% for fundamental (LP01) mode. It has been noted that the impact of mode polarization on crosstalk behavior is minor, with difference in crosstalk levels between two polarized spatial modes as ≤0.2 dB. Moreover, the optimized cladding diameter has been obtained for all 5-LP modes for a target value of crosstalk of -50 dB/100 km, with all the core arrangements. The dispersion characteristic has also been analyzed with respect to wavelength, which is nearly 2.5 ps/nm km at operating wavelength 1550 nm. The relative core multiplicity factor (RCMF) for the proposed design is obtained as 64.

Software Formal Inspections Guidebook

Science.gov (United States)

1993-01-01

The Software Formal Inspections Guidebook is designed to support the inspection process of software developed by and for NASA. This document provides information on how to implement a recommended and proven method for conducting formal inspections of NASA software. This Guidebook is a companion document to NASA Standard 2202-93, Software Formal Inspections Standard, approved April 1993, which provides the rules, procedures, and specific requirements for conducting software formal inspections. Application of the Formal Inspections Standard is optional to NASA program or project management. In cases where program or project management decide to use the formal inspections method, this Guidebook provides additional information on how to establish and implement the process. The goal of the formal inspections process as documented in the above-mentioned Standard and this Guidebook is to provide a framework and model for an inspection process that will enable the detection and elimination of defects as early as possible in the software life cycle. An ancillary aspect of the formal inspection process incorporates the collection and analysis of inspection data to effect continual improvement in the inspection process and the quality of the software subjected to the process.

Server scheduling in the Lp norm: A rising tide lifts all boat

NARCIS (Netherlands)

Bansal, N.; Pruhs, K.R.

2003-01-01

Often server systems do not implement the best known algorithms for optimizing average Quality of Service (QoS) out of concern of that these algorithms may be insufficiently fair to individual jobs. The standard method for balancing average QoS and fairness is optimize the Lp metric, 1

Influence of fruit drinks with or without lactobacillus Lp299v on the gastrointestinal uptake of paracetamol in man

Directory of Open Access Journals (Sweden)

Edvinsson Lars

2009-03-01

Full Text Available Abstract Background Clinical observations have revealed that patients throw up undigested paracetamol tablets several hours following intake of rosehip drink with Lp299v (Proviva. The purpose of this study was to demonstrate if this translates into altered plasma levels of paracetamol in nineteen healthy subjects consuming 200 ml of water, Rose hip drink or Proviva together with 1.5 gram of paracetamol. Findings The concentration of paracetamol in plasma increased rapidly when the paracetamol-containing tablets were consumed together with water and after 30 minutes a median level of 90 μmol/l was reached (a 95% confidence interval of 57,161. The corresponding 30 minutes values of paracetamol levels in the presence of rosehip with or without Lp299v were 0 μmol/l (95% confidence intervals contain only zero for both rosehip treatments. There were significant differences in AUC, maximal paracetamol concentration and in time to maximal paracetamol concentration. The median maximal paracetamol concentration was 147 μmol/l for water, which is significantly higher than the median for rosehip drink with Lp299v,113.5 μmol/l, and than the median for rosehip-drink without Lp299v, 106.5 μmol/l (p = 0.002, and p = 0.003; there were no significant difference between rosehip drink with or without Lp299v (p > 0.3. Conclusion We have demonstrated an interaction between the uptake of paracetamol and the solvent in rosehip drink/Provia which mainly consists of long chain carbohydrates. This may in the clinic translate to the use of more drug than it is necessary.

Risk Assessment in the Istanbul Strait Using Black Sea MOU Port State Control Inspections

Directory of Open Access Journals (Sweden)

Esma Gül Emecen Kara

2016-04-01

Full Text Available The Istanbul Strait has intense maritime traffic while, at the same time, it poses significant navigational challenges. Due to these properties, there is always a high risk arising from maritime shipping in this region. Especially, substandard ships threaten life, as well as the marine environment. In this aspect, Black Sea Memorandum of Understanding (MOU Port State Control Inspections are important for maritime safety in the Istanbul Strait, because they directly reflect the performance of ships passing through the Istanbul Strait. Stringent and effective inspections assist in the enhancement of navigation safety and help to develop sustainable environment management. In this context, this study aims to assess maritime safety for the Strait region concerning passing flag states. Firstly, to assess the performance of flag states in general, the Black Sea MOU Black-Grey-White lists were generated for the period 2004–2014 and the change in the performance of these flags was examined. Secondly, the risk level of each flag state passing from the Strait region was determined using the method of weighted points based on the Black-Grey-White List, deficiency index level, casualty index level, and passing index level.

Shell Inspection History and Current CMM Inspection Efforts

Energy Technology Data Exchange (ETDEWEB)

Montano, Joshua Daniel [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-01-26

The following report provides a review of past and current CMM Shell Inspection efforts. Calibration of the Sheffield rotary contour gauge has expired and the primary inspector, Matthew Naranjo, has retired. Efforts within the Inspection team are transitioning from maintaining and training new inspectors on Sheffield to off-the-shelf CMM technology. Although inspection of a shell has many requirements, the scope of the data presented in this report focuses on the inner contour, outer contour, radial wall thickness and mass comparisons.

Randomization of inspections

International Nuclear Information System (INIS)

Markin, J.T.

1989-01-01

As the numbers and complexity of nuclear facilities increase, limitations on resources for international safeguards may restrict attainment of safeguards goals. One option for improving the efficiency of limited resources is to expand the current inspection regime to include random allocation of the amount and frequency of inspection effort to material strata or to facilities. This paper identifies the changes in safeguards policy, administrative procedures, and operational procedures that would be necessary to accommodate randomized inspections and identifies those situations where randomization can improve inspection efficiency and those situations where the current nonrandom inspections should be maintained. 9 refs., 1 tab

76 FR 14387 - Texas Eastern Transmission, LP; Notice of Request Under Blanket Authorization

Science.gov (United States)

2011-03-16

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. CP11-118-000] Texas Eastern... Eastern Transmission, LP (Texas Eastern), Post Office Box 1642, Houston, Texas 77251-1642, filed in Docket... West Cameron Blocks 566, 565, and 548, offshore Louisiana, under Texas Eastern's blanket certificate...

Immunogenicity, Safety, and Tolerability of Bivalent rLP2086 Meningococcal Group B Vaccine Administered Concomitantly With Diphtheria, Tetanus, and Acellular Pertussis and Inactivated Poliomyelitis Vaccines to Healthy Adolescents.

Science.gov (United States)

Vesikari, Timo; Wysocki, Jacek; Beeslaar, Johannes; Eiden, Joseph; Jiang, Qin; Jansen, Kathrin U; Jones, Thomas R; Harris, Shannon L; O'Neill, Robert E; York, Laura J; Perez, John L

2016-06-01

Concomitant administration of bivalent rLP2086 (Trumenba [Pfizer, Inc] and diphtheria, tetanus, and acellular pertussis and inactivated poliovirus vaccine (DTaP/IPV) was immunologically noninferior to DTaP/IPV and saline and was safe and well tolerated. Bivalent rLP2086 elicited robust and broad bactericidal antibody responses to diverse Neisseria meningitidis serogroup B strains expressing antigens heterologous to vaccine antigens after 2 and 3 vaccinations. Bivalent rLP2086, a Neisseria meningitidis serogroup B (MnB) vaccine (Trumenba [Pfizer, Inc]) recently approved in the United States to prevent invasive MnB disease in individuals aged 10-25 years, contains recombinant subfamily A and B factor H binding proteins (fHBPs). This study evaluated the coadministration of Repevax (diphtheria, tetanus, and acellular pertussis and inactivated poliovirus vaccine [DTaP/IPV]) (Sanofi Pasteur MSD, Ltd) and bivalent rLP2086. Healthy adolescents aged ≥11 to B proteins different from the vaccine antigens. Participants were randomly assigned to receive bivalent rLP2086 + DTaP/IPV (n = 373) or saline + DTaP/IPV (n = 376). Immune responses to DTaP/IPV in participants who received bivalent rLP2086 + DTaP/IPV were noninferior to those in participants who received saline + DTaP/IPV.The proportions of bivalent rLP2086 + DTaP/IPV recipients with prespecified seroprotective hSBA titers to the 4 MnB test strains were 55.5%-97.3% after vaccination 2 and 81.5%-100% after vaccination 3. The administration of bivalent rLP2086 was well tolerated and resulted in few serious adverse events. Immune responses to DTaP/IPV administered with bivalent rLP2086 to adolescents were noninferior to DTaP/IPV administered alone. Bivalent rLP2086 was well tolerated and elicited substantial and broad bactericidal responses to diverse MnB strains in a high proportion of recipients after 2 vaccinations, and these responses were further enhanced after 3 vaccinations.ClinicalTrials.gov identifier NCT01323270

Inspection of internal tank welds using the ACFM inspection method

International Nuclear Information System (INIS)

Topp, D.A.; Lugg, M.C.

2009-01-01

The paper describes recent developments of the ACFM technique and describes several case studies where ACFM has been used to inspect the internal plate welds on large steel storage tanks in refineries. For weld inspection, conventional methods such as magnetic particle inspection or vacuum box testing are generally used. This paper presents comparisons of the results from ACFM with those from the conventional methods, from which conclusions are drawn as to the benefits this technique offers in terms of cost, time savings and inspection reliability. (author)

Condition Assessment Survey (CAS) Program. Deficiency standards and inspections methods manual: Volume 8, 0.08 Mechanical, Book 1

Energy Technology Data Exchange (ETDEWEB)

1993-05-01

System information is presented for asset determinant factor/CAS repair codes/CAS cost factors; guide sheet too & material listing; testing methods; inspection frequency; standard system design life tables; and system work breakdown structure. Deficiency standards are given for plumbing, fire protection, heating, cooling, and special (drinking water cooling systems).

RPII Inspection and Licensing Activities and Annual Inspection Programme for 2012

International Nuclear Information System (INIS)

2012-04-01

The purpose of this document is to promote transparency in the activities of the RPII. It explains aspects of the internal workings of the Regulation and Information Management Division of the Institute to aid understanding of the processes and decisions of that Division which may impact on licensees and other interested parties. The objective of the report is to provide an overview of inspection activities of the RPII, to examine the evolution in licensee numbers and to outline the rationale in developing annual inspection programmes. All inspection activities are now carried out within the framework of a quality management system including; inspection planning, the training of inspectors, the conduct of inspections, as well as post inspection follow up and review. This report also provides an overview of the main features of the quality system

76 FR 22804 - Technical Amendment to List of CBP Preclearance Offices in Foreign Countries: Addition of Dublin...

Science.gov (United States)

2011-04-25

...] Technical Amendment to List of CBP Preclearance Offices in Foreign Countries: Addition of Dublin, Ireland... Border Protection (CBP) has added a preclearance station in Dublin, Ireland. CBP officers at preclearance... agriculture laws, as well as other laws enforced by CBP at the U.S. border. Such inspections and examinations...

Study on Classification Accuracy Inspection of Land Cover Data Aided by Automatic Image Change Detection Technology

Science.gov (United States)

Xie, W.-J.; Zhang, L.; Chen, H.-P.; Zhou, J.; Mao, W.-J.

2018-04-01

The purpose of carrying out national geographic conditions monitoring is to obtain information of surface changes caused by human social and economic activities, so that the geographic information can be used to offer better services for the government, enterprise and public. Land cover data contains detailed geographic conditions information, thus has been listed as one of the important achievements in the national geographic conditions monitoring project. At present, the main issue of the production of the land cover data is about how to improve the classification accuracy. For the land cover data quality inspection and acceptance, classification accuracy is also an important check point. So far, the classification accuracy inspection is mainly based on human-computer interaction or manual inspection in the project, which are time consuming and laborious. By harnessing the automatic high-resolution remote sensing image change detection technology based on the ERDAS IMAGINE platform, this paper carried out the classification accuracy inspection test of land cover data in the project, and presented a corresponding technical route, which includes data pre-processing, change detection, result output and information extraction. The result of the quality inspection test shows the effectiveness of the technical route, which can meet the inspection needs for the two typical errors, that is, missing and incorrect update error, and effectively reduces the work intensity of human-computer interaction inspection for quality inspectors, and also provides a technical reference for the data production and quality control of the land cover data.

76 FR 57087 - Stone Harbor Investment Partners LP, et al.; Notice of Application

Science.gov (United States)

2011-09-15

... SECURITIES AND EXCHANGE COMMISSION [Investment Company Act Release No. 29784; File No. 812-13931] Stone Harbor Investment Partners LP, et al.; Notice of Application September 7, 2011. AGENCY: Securities..., or cause more than 10% of the acquired company's voting stock to be owned by investment companies and...

76 FR 65507 - Notice of Petition for Rate Approval; Eagle Ford Midstream, LP

Science.gov (United States)

2011-10-21

... Petition for Rate Approval; Eagle Ford Midstream, LP Take notice that on October 11, 2011, (Eagle Ford..., and its initial baseline Statement of Operating Conditions. Eagle Ford states that it is an existing..., currently providing intrastate services to its customers. Eagle Ford proposed rates for Section 311...

Technology Assessment of the Inspection Readiness Plan in Chemical Weapons Convention Challenge Inspections

National Research Council Canada - National Science Library

Woodley, Anthony

1998-01-01

...) Challenge Inspections. The CWC is an intrusive inspection. The Challenge Inspection allows for a team of international inspectors to inspect on very short notice a naval facility suspected of violating the CWC...

Process Improvement to the Inspection Readiness Plan in Chemical Weapons Convention Challenge Inspections

National Research Council Canada - National Science Library

Triplett, William

1997-01-01

...) Challenge Inspection. The CWC is an intensive inspection. The Challenge Inspection allows for a team of international inspectors to inspect a naval facility suspected of violating the CWC on very short notice...

General inspection strategy for fault diagnosis-minimizing the inspection costs

International Nuclear Information System (INIS)

Reinertsen, Rune; Wang Xiaozhong

1995-01-01

In this paper, a general inspection strategy for system fault diagnosis is presented. The procedure presented in this paper, is an improvement of methods described in papers by , and . This general strategy provides the optimal inspection procedure when the inspections require unequal effort and the minimum cut set probabilities are unequal. This feature makes the procedure described in this paper more useful for practical applications than the most recent procedure presented in the paper by Najmus-Saqib and Ishaque, which requires the minimum cut set probabilities to be equal. The inspection strategy described in this paper is based on first inspecting the basic event that will provide the maximum information gain per unit cost invested. The information gain is measured by the decrease of Shannon entropy. A detailed tutorial example is presented

Cargo container inspection test program at ARPA's Nonintrusive Inspection Technology Testbed

Science.gov (United States)

Volberding, Roy W.; Khan, Siraj M.

1994-10-01

An x-ray-based cargo inspection system test program is being conducted at the Advanced Research Project Agency (ARPA)-sponsored Nonintrusive Inspection Technology Testbed (NITT) located in the Port of Tacoma, Washington. The test program seeks to determine the performance that can be expected from a dual, high-energy x-ray cargo inspection system when inspecting ISO cargo containers. This paper describes an intensive, three-month, system test involving two independent test groups, one representing the criminal smuggling element and the other representing the law enforcement community. The first group, the `Red Team', prepares ISO containers for inspection at an off-site facility. An algorithm randomly selects and indicates the positions and preparation of cargoes within a container. The prepared container is dispatched to the NITT for inspection by the `Blue Team'. After in-gate processing, it is queued for examination. The Blue Team inspects the container and decides whether or not to pass the container. The shipment undergoes out-gate processing and returns to the Red Team. The results of the inspection are recorded for subsequent analysis. The test process, including its governing protocol, the cargoes, container preparation, the examination and results available at the time of submission are presented.

Inspection Database

Data.gov (United States)

U.S. Department of Health & Human Services — FDA is disclosing the final inspection classification for inspections related to currently marketed FDA-regulated products. The disclosure of this information is not...

Evaluation of Protective Immune Responses Induced by Recombinant TrxLp and ENO2 Proteins against Toxoplasma gondii Infection in BALB/c Mice

Directory of Open Access Journals (Sweden)

Meng Wang

2016-01-01

Full Text Available Toxoplasma gondii is an obligate intracellular parasitic protozoan that can infect almost all species of warm-blooded animals. As any chemical-based drugs could not act against the tissue cyst stage of T. gondii, vaccination may be one of the ideal control strategies. In the present study, two new vaccine candidates, named TgENO2 and TgTrxLp, were purified from Escherichia coli with pET-30a(+ expression system and then were injected into BALB/c mice to evaluate the protective efficacy against acute and chronic toxoplasmosis. The results showed that both the recombinant proteins, either alone or in combination, could elicit strong humoral and cellular immune responses with a higher level of IgG antibodies, IFN-γ, IL-2, CD4+, and CD8+ T cells as compared to those in mice from control groups. After acute challenge with tachyzoites of the GJS strain, mice immunized with rTgTrxLp (8±2.77 d, rTgENO2 (7.4±1.81 d, and rTgTrxLp + rTgENO2 (8.38±4.57 d proteins showed significantly longer survival time than those that received Freund’s adjuvant (6.78±2.08 d and PBS (6.38±4.65 d (χ2 = 9.687, df = 4, P=0.046. The protective immunity of rTgTrxLp, rTgENO2, and rTgTrxLp + rTgENO2 proteins against chronic T. gondii infection showed 69.77%, 58.14%, and 20.93% brain cyst reduction as compared to mice that received PBS. The present study suggested that both TgENO2 and TgTrxLp were potential candidates for the development of multicomponent vaccines against toxoplasmosis.

The phosducin-like protein PhLP1 impacts regulation of glycoside hydrolases and light response in Trichoderma reesei

Directory of Open Access Journals (Sweden)

Tisch Doris

2011-12-01

Full Text Available Abstract Background In the biotechnological workhorse Trichoderma reesei (Hypocrea jecorina transcription of cellulase genes as well as efficiency of the secreted cellulase mixture are modulated by light. Components of the heterotrimeric G-protein pathway interact with light-dependent signals, rendering this pathway a key regulator of cellulase gene expression. Results As regulators of heterotrimeric G-protein signaling, class I phosducin-like proteins, are assumed to act as co-chaperones for G-protein beta-gamma folding and exert their function in response to light in higher eukaryotes. Our results revealed light responsive transcription of the T. reesei class I phosducin-like protein gene phlp1 and indicate a light dependent function of PhLP1 also in fungi. We showed the functions of PhLP1, GNB1 and GNG1 in the same pathway, with one major output being the regulation of transcription of glycoside hydrolase genes including cellulase genes in T. reesei. We found no direct correlation between the growth rate and global regulation of glycoside hydrolases, which suggests that regulation of growth does not occur only at the level of substrate degradation efficiency. Additionally, PhLP1, GNB1 and GNG1 are all important for proper regulation of light responsiveness during long term exposure. In their absence, the amount of light regulated genes increased from 2.7% in wild type to 14% in Δphlp1. Besides from the regulation of degradative enzymes, PhLP1 was also found to impact on the transcription of genes involved in sexual development, which was in accordance with decreased efficiency of fruiting body formation in Δphlp1. The lack of GNB1 drastically diminished ascospore discharge in T. reesei. Conclusions The heterotrimeric G-protein pathway is crucial for the interconnection of nutrient signaling and light response of T. reesei, with the class I phosducin-like protein PhLP1, GNB1 and GNG1 acting as important nodes, which influence light

Optical fiber inspection system

Science.gov (United States)

Moore, Francis W.

1987-01-01

A remote optical inspection system including an inspection head. The inspection head has a passageway through which pellets or other objects are passed. A window is provided along the passageway through which light is beamed against the objects being inspected. A plurality of lens assemblies are arranged about the window so that reflected light can be gathered and transferred to a plurality of coherent optical fiber light guides. The light guides transfer the light images to a television or other image transducer which converts the optical images into a representative electronic signal. The electronic signal can then be displayed on a signal viewer such as a television monitor for inspection by a person. A staging means can be used to support the objects for viewing through the window. Routing means can be used to direct inspected objects into appropriate exit passages for accepted or rejected objects. The inspected objects are advantageously fed in a singular manner to the staging means and routing means. The inspection system is advantageously used in an enclosure when toxic or hazardous materials are being inspected.

75 FR 57844 - Airworthiness Directives; Gulfstream Aerospace LP (Type Certificate Previously Held by Israel...

Science.gov (United States)

2010-09-23

... Airworthiness Directives; Gulfstream Aerospace LP (Type Certificate Previously Held by Israel Aircraft... Previously Held by Israel Aircraft Industries, Ltd.): Amendment 39-16438. Docket No. FAA-2010-0555... (Type Certificate previously held by Israel Aircraft Industries, Ltd.) Model Galaxy and Gulfstream 200...

76 FR 65717 - Erie Boulevard Hydropower, L.P.; Notice of Availability of Environmental Assessment

Science.gov (United States)

2011-10-24

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Project No. 2713-082-New York] Erie Boulevard Hydropower, L.P.; Notice of Availability of Environmental Assessment In accordance with the National Environmental Policy Act of 1969 and the Federal Energy Regulatory Commission's (Commission...

Efficacy and safety of the probiotic Lactobacillus paracasei LP-33 in allergic rhinitis

DEFF Research Database (Denmark)

Costa, D J; Marteau, P; Amouyal, M

2014-01-01

BACKGROUND/OBJECTIVES: An imbalance between Th1 and Th2 cells is involved in allergic rhinitis (AR) that may be improved by probiotics. To test the efficacy of the probiotic Lactobacillus paracasei subsp. paracasei LP-33, a double-blind, placebo-controlled, randomized trial was carried out in pat...

76 FR 25330 - Texas Eastern Transmission, LP; Notice of Request Under Blanket Authorization

Science.gov (United States)

2011-05-04

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. CP11-216-000] Texas Eastern... Eastern Transmission, LP (Texas Eastern), 5400 Westheimer Court, Houston, Texas 77056, filed in Docket No... in the termination of any services to Texas Eastern's customers, all as more fully set forth in the...

Regulatory inspection of the egyptian gamma irradiator using a proposed inspection checklist

International Nuclear Information System (INIS)

Abdel-Ghani, A.H.

2000-01-01

Regulatory inspections are one of the most important elements of a regulatory programme. It shall be performed in all areas of the regulatory responsibility and during all phases of siting, design, construction, commissioning, operation, maintenance and decommissioning of an irradiator facility. The egyptian mega gamma irradiator operating since december 1979 has a Co-60 source of about 400 kilo curies and is used mainly for sterilization of medical supplies and pharmaceuticals and for preservation of some food stuffs. The constructor (Nordion international Inc.) recommended an extensive inspection programme. In accordance with the international and national (2.3) regulations as well as the licensing conditions, the competent authority (NCNSRC) shall perform regulatory inspections both announced and unannounced. In order to facilitate the inspection task and to harmonize the inspection reports a checklist for inspection is proposed which can be used also as an inspection report form

78 FR 54861 - Inspection, Repair, and Maintenance; Driver-Vehicle Inspection Report

Science.gov (United States)

2013-09-06

... No. FMCSA-2012-0336] RIN 2126-AB46 Inspection, Repair, and Maintenance; Driver-Vehicle Inspection... Federal Register of August 7, 2013, regarding driver vehicle inspection reports. The corrections involve..., Vehicle and Roadside Operations Division, Office of Bus and Truck Standards and Operations, Federal Motor...

Additive Manufacturing Infrared Inspection

Science.gov (United States)

Gaddy, Darrell; Nettles, Mindy

2015-01-01

The Additive Manufacturing Infrared Inspection Task started the development of a real-time dimensional inspection technique and digital quality record for the additive manufacturing process using infrared camera imaging and processing techniques. This project will benefit additive manufacturing by providing real-time inspection of internal geometry that is not currently possible and reduce the time and cost of additive manufactured parts with automated real-time dimensional inspections which deletes post-production inspections.

Health products inspection

International Nuclear Information System (INIS)

Stoltz, M.

2009-01-01

To protect public health, the Health Products Inspection is a public service mission where the application of regulations concerning activities on human health products and cosmetic products is verified. This mission permits a global approach to assess the health products risk-based benefit and, in monitoring by laboratory testing and by on site inspections, to verify their compliance with appropriate regulations. The seventy five inspectors perform about eight hundred inspections per year, in France and abroad. These inspections are related to data provided in the health products assessment and also to manufacturing and delivery practices. The French inspection body is also involved in the training of foreign inspectors and in the harmonization of national, European and international practices either for operators than for the competent authorities. (author)

76 FR 46287 - Erie Boulevard Hydropower, L.P.; Notice of Availability of Environmental Assessment

Science.gov (United States)

2011-08-02

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Project No. 2047-049] Erie Boulevard Hydropower, L.P.; Notice of Availability of Environmental Assessment In accordance with the National Environmental Policy Act of 1969 and the Federal Energy Regulatory Commission's (Commission or FERC) regulations...

Information-Driven Inspections

International Nuclear Information System (INIS)

Laughter, Mark D.; Whitaker, J. Michael; Lockwood, Dunbar

2010-01-01

New uranium enrichment capacity is being built worldwide in response to perceived shortfalls in future supply. To meet increasing safeguards responsibilities with limited resources, the nonproliferation community is exploring next-generation concepts to increase the effectiveness and efficiency of safeguards, such as advanced technologies to enable unattended monitoring of nuclear material. These include attribute measurement technologies, data authentication tools, and transmission and security methods. However, there are several conceptual issues with how such data would be used to improve the ability of a safeguards inspectorate such as the International Atomic Energy Agency (IAEA) to reach better safeguards conclusions regarding the activities of a State. The IAEA is pursuing the implementation of information-driven safeguards, whereby all available sources of information are used to make the application of safeguards more effective and efficient. Data from continuous, unattended monitoring systems can be used to optimize on-site inspection scheduling and activities at declared facilities, resulting in fewer, better inspections. Such information-driven inspections are the logical evolution of inspection planning - making use of all available information to enhance scheduled and randomized inspections. Data collection and analysis approaches for unattended monitoring systems can be designed to protect sensitive information while enabling information-driven inspections. A number of such inspections within a predetermined range could reduce inspection frequency while providing an equal or greater level of deterrence against illicit activity, all while meeting operator and technology holder requirements and reducing inspector and operator burden. Three options for using unattended monitoring data to determine an information-driven inspection schedule are to (1) send all unattended monitoring data off-site, which will require advances in data analysis techniques to

INSPECT: a package of computer programs for planning safeguards inspections

International Nuclear Information System (INIS)

Wincek, M.A.; Mullen, M.F.

1979-04-01

As part of the U.S. program to provide technical assistance to the International Atomic Energy Agency, a package of computer programs was developed for use in planning safeguards inspections of various types of nuclear facilities. The INSPECT software package is a set of five interactive FORTRAN programs which can be used to calculate the variance components of the MUF (Material Unaccounted For) statistic, the variance components of the D (difference) statistic, attribute and variables sampling plans, a measure of the effectiveness of the inspection, and a measurement of the cost of implementing the inspection plan. This report describes the programs and explains how to use them

Fuel inspection device

International Nuclear Information System (INIS)

Tsuji, Tadashi.

1990-01-01

The fuel inspection device of the present invention has a feature of obtaining an optimum illumination upon fuel rod interval inspection operation in a fuel pool. That is, an illumination main body used underwater is connected to a cable which is led out on a floor. A light control device is attached to the other end of the cable and an electric power cable is connected to the light control device. A light source (for example, incandescent lamp) is incorporated in the casing of the illumination main body, and a diffusion plate is disposed at the front to provide a plane light source. The light control device has a light control knob capable of remote-controlling the brightness of the light of the illumination main body. In the fuel inspection device thus constituted, halation is scarcely caused on the image screen upon inspection of fuels by a submerged type television camera to facilitate control upon inspection. Accordingly, efficiency of the fuel inspection can be improved to shorten the operation time. (I.S.)

A randomized, phase 1/2 trial of the safety, tolerability, and immunogenicity of bivalent rLP2086 meningococcal B vaccine in healthy infants.

Science.gov (United States)

Martinon-Torres, Federico; Gimenez-Sanchez, Francisco; Bernaola-Iturbe, Enrique; Diez-Domingo, Javier; Jiang, Qin; Perez, John L

2014-09-08

Neisseria meningitidis serogroup B (MnB) is a major cause of invasive meningococcal disease in infants. A conserved, surface-exposed lipoprotein, LP2086 (a factor H-binding protein [fHBP]), is a promising MnB vaccine target. A bivalent, recombinant vaccine targeting the fHBP (rLP2086) of MnB was developed. This phase 1/2 clinical study was designed to assess the immunogenicity, safety, and tolerability of a 4-dose series of the rLP2086 vaccine at 20-, 60-, 120-, or 200-μg dose levels in vaccine-naive infants when given with routine childhood vaccines. The study was to consist of two phases: a single-blind sentinel phase and an open-label full enrollment phase. During the sentinel phase, randomization of subjects to the next higher dose was delayed pending a 14-day safety review of dose 1 of the preceding dose cohort. The full enrollment phase was to occur after completion of the sentinel phase. Local reactions were generally mild and adverse events infrequent; however, after only 46 infants were randomized into the study, fever rates were 64% and 90% in subjects receiving one 20- or 60-μg rLP2086 dose, respectively. Most fevers were group and 1 subject in the 60-μg group experienced fevers >39.0°C; no fevers were >40.0°C. Due to these high fever rates, the study was terminated early. No immunogenicity data were collected. This report discusses the safety and acceptability of rLP2086 in infants after one 20- or 60-μg dose. Due to the high fever rate experienced in the 20- and 60-μg groups, rLP2086 in the current formulation may not be acceptable for infants. Copyright © 2014. Published by Elsevier Ltd.

Inspection of training activities by the NRC's Office of Inspection and Enforcement

International Nuclear Information System (INIS)

Ruhlman, W.A.

1975-01-01

New requirements in the Code of Federal Regulations, the issuance of new Regulatory Guides and ANSI Standards, have indicated the increased emphasis being placed on training by forces in the Nuclear Industry and the Nuclear Regulatory Commission. A brief description is presented of the functions of the Office of Inspection and Enforcement in the training areas. Three areas are examined: general inspection techniques; training inspection scope; and training inspection bases

OSE inspection of protection program operations field perspective of inspections

International Nuclear Information System (INIS)

Brown, R.W.; Martin, H.R.

1987-01-01

Protection Program Operations includes three functional areas: Physical Protection Systems, Protective Forces, and System Performance Testing. The Office of Security Evaluations (OSE) inspects field offices in these areas by evaluating programs relative to Standards and Criteria and by performing a variety of exercises and other types of tests to assure protective systems are effective and maintained at a proper level to meet the defined threat. Their perception of the OSE inspections has been positive. The approach taken by ID, with key areas/activities emphasized, during each phase of the field inspection process is described in this report. The most important areas for field offices to concentrate are: inspection preparations through self-evaluation, improving communications, assigning knowledgeable trusted agents, increasing awareness of facility procedures and operations, and assuring daily validations of inspected areas. Emphasis is placed on striving for a balance in reporting both positive and negative findings, and for consistency between ratings and the importance of report findings. OSE efforts to develop improved rating methodologies are encouraged

77 FR 58323 - Airworthiness Directives; Gulfstream Aerospace LP (Type Certificate Previously Held by Israel...

Science.gov (United States)

2012-09-20

... Aerospace LP (Type Certificate Previously Held by Israel Aircraft Industries, Ltd.) Airplanes AGENCY... Previously Held by Israel Aircraft Industries, Ltd.) Model Gulfstream G150 airplanes. This proposed AD was.... Discussion The Civil Aviation Authority of Israel (CAAI), which is the aviation authority for Israel, has...

77 FR 32069 - Airworthiness Directives; Gulfstream Aerospace LP (Type Certificate Previously Held by Israel...

Science.gov (United States)

2012-05-31

... Aerospace LP (Type Certificate Previously Held by Israel Aircraft Industries, Ltd.) Airplanes AGENCY... previously held by Israel Aircraft Industries, Ltd.) Model Galaxy and Gulfstream 200 airplanes. This proposed... receive about this proposed AD. Discussion The Civil Aviation Authority of Israel (CAAI), which is the...

Operation of an ITER relevant inspection robot on Tore Supra tokamak

Energy Technology Data Exchange (ETDEWEB)

Gargiulo, Laurent [CEA, IRFM, F-13108 Saint-Paul-lez-Durance (France)], E-mail: laurent.gargiulo@cea.fr; Bayetti, Pascal; Bruno, Vincent; Hatchressian, Jean-Claude; Hernandez, Caroline; Houry, Michael [CEA, IRFM, F-13108 Saint-Paul-lez-Durance (France); Keller, Delphine [CEA, LIST, Service de Robotique Interactive, F-92265 Fontenay aux Roses (France); Martins, Jean-Pierre [CEA, IRFM, F-13108 Saint-Paul-lez-Durance (France); Measson, Yvan; Perrot, Yann [CEA, LIST, Service de Robotique Interactive, F-92265 Fontenay aux Roses (France); Samaille, Frank [CEA, IRFM, F-13108 Saint-Paul-lez-Durance (France)

2009-06-15

Robotic operations are one of the major maintenance challenges for ITER and future fusion reactors. CEA has developed a multipurpose carrier able to realize deployments in the plasma vessel without breaking the Ultra High Vacuum (UHV) and temperature conditioning. A 6 years R and D programme was jointly conducted by CEA-LIST Interactive Robotics Unit and the Institute for Magnetic Fusion Research (IRFM) in order to demonstrate the feasibility and reliability of an in-vessel inspection robot relevant to ITER requirements. The Articulated Inspection Arm robot (AIA) is an 8-m long multilink carrier with a payload up to 10 kg operable between plasma under tokamak conditioning environment; its geometry allows a complete close inspection of Plasma Facing Components (PFCs) of the Tore Supra vessel. Different tools are being developed by CEA to be plugged at the front head of the carrier. The diagnostic presently in operation consists in a viewing system offering accurate visual inspection of PFCs. Leak detection of first wall based on helium sniffing and laser compact system for carbon co-deposited layers characterizations or treatments are also considered for demonstration. In April 2008, the AIA robot equipped with its vision diagnostic has realized a complete deployment into Tore Supra and the first closed inspection of the vessel under UHV conditions. During the upcoming experimental campaign, the same operation will be performed under relevant conditions (10{sup -6} Pa and 120 deg. C) after a conditioning phase at 200 deg. C to avoid outgassing pollution of the chamber. This paper describes the different steps of the project development, robot capabilities with the present operations conducted on Tore Supra and future requirements for making the robot a tool for tokamak routine operation.

Effect of nicotine on melanogenesis and antioxidant status in HEMn-LP melanocytes

International Nuclear Information System (INIS)

Delijewski, Marcin; Beberok, Artur; Otręba, Michał; Wrześniok, Dorota; Rok, Jakub; Buszman, Ewa

2014-01-01

Nicotine is a natural ingredient of tobacco plants and is responsible for the addictive properties of tobacco. Nowadays nicotine is also commonly used as a form of smoking cessation therapy. It is suggested that nicotine may be accumulated in human tissues containing melanin. This may in turn affect biochemical processes in human cells producing melanin. The aim of this study was to examine the effect of nicotine on melanogenesis and antioxidant status in cultured normal human melanocytes HEMn-LP. Nicotine induced concentration-dependent loss in melanocytes viability. The value of EC 50 was determined to be 7.43 mM. Nicotine inhibited a melanization process in human light pigmented melanocytes and caused alterations of antioxidant defense system. Significant changes in cellular antioxidant enzymes: superoxide dismutase and catalase activities and in hydrogen peroxide content were stated. The obtained results may explain a potential influence of nicotine on biochemical processes in melanocytes in vivo during long term exposition to nicotine. - Graphical abstract: Nicotine inhibits melanogenesis and induces oxidative stress in HEMn-LP melanocytes. - Highlights: • Nicotine induces concentration-dependent loss in melanocytes viability. • Nicotine in non-cytotoxic concentrations inhibits melanogenesis. • Nicotine in higher concentrations induces oxidative stress

Effect of nicotine on melanogenesis and antioxidant status in HEMn-LP melanocytes

Energy Technology Data Exchange (ETDEWEB)

Delijewski, Marcin; Beberok, Artur; Otręba, Michał; Wrześniok, Dorota; Rok, Jakub; Buszman, Ewa, E-mail: ebuszman@sum.edu.pl

2014-10-15

Nicotine is a natural ingredient of tobacco plants and is responsible for the addictive properties of tobacco. Nowadays nicotine is also commonly used as a form of smoking cessation therapy. It is suggested that nicotine may be accumulated in human tissues containing melanin. This may in turn affect biochemical processes in human cells producing melanin. The aim of this study was to examine the effect of nicotine on melanogenesis and antioxidant status in cultured normal human melanocytes HEMn-LP. Nicotine induced concentration-dependent loss in melanocytes viability. The value of EC{sub 50} was determined to be 7.43 mM. Nicotine inhibited a melanization process in human light pigmented melanocytes and caused alterations of antioxidant defense system. Significant changes in cellular antioxidant enzymes: superoxide dismutase and catalase activities and in hydrogen peroxide content were stated. The obtained results may explain a potential influence of nicotine on biochemical processes in melanocytes in vivo during long term exposition to nicotine. - Graphical abstract: Nicotine inhibits melanogenesis and induces oxidative stress in HEMn-LP melanocytes. - Highlights: • Nicotine induces concentration-dependent loss in melanocytes viability. • Nicotine in non-cytotoxic concentrations inhibits melanogenesis. • Nicotine in higher concentrations induces oxidative stress.

Strain and temperature characteristics of the LP11 mode based on a few-mode fiber Bragg grating and core-offset splicing

Science.gov (United States)

Jin, Wenxing; Xu, Yao; Jiang, Youchao; Wu, Yue; Yao, Shuzhi; Xiao, Shiying; Qi, Yanhui; Ren, Wenhua; Jian, Shuisheng

2018-02-01

We propose and demonstrate a ring fiber laser based on a few-mode fiber Bragg grating for strain and temperature sensing using only the LP11 mode. The core-offset splicing method is used to ensure effective coupling from the fundamental mode to the LP11 mode. A stable erbium-doped fiber laser operating as a single LP11 mode with a 3 dB linewidth of about 0.02 nm and an optical signal-to-noise ratio over 42 dB is achieved by appropriately adjusting the polarization controller between the optical circulator and the few-mode fiber Bragg grating. A high axial strain sensitivity of 0.8778 pm μ\\varepsilon-1 and a temperature sensitivity of 9.9214 pm °C-1 are achieved with the advantages of all-fiber, simple construction and easy control.

Safety and immunogenicity of a meningococcal B bivalent rLP2086 vaccine in healthy toddlers aged 18-36 months: a phase 1 randomized-controlled clinical trial.

Science.gov (United States)

Marshall, Helen S; Richmond, Peter C; Nissen, Michael D; Jiang, Qin; Anderson, Annaliesa S; Jansen, Kathrin U; Reynolds, Graham; Ziegler, John B; Harris, Shannon L; Jones, Thomas R; Perez, John L

2012-10-01

A bivalent, recombinant, factor H-binding protein (rLP2086) vaccine was developed to protect against invasive Neisseria meningitidis serogroup B (MnB) in children and adolescents. Healthy toddlers (N = 99) were enrolled to 3 ascending dose-level cohorts (20, 60 or 200 μg). Within each cohort (n = 33), subjects were randomized to receive an initial formulation of the bivalent rLP2086 vaccine at 0, 1 and 6 months or hepatitis A vaccine/placebo control (2:1 ratio). Reactogenicity was assessed by parental reporting of local and systemic reactions using electronic diaries and reports of unsolicited adverse events. Immunogenicity was assessed by serum bactericidal activity assay using human complement and rLP2086-specific IgG binding. The vaccine was considered to be well tolerated. Tenderness was the most frequently reported local reaction. Upper respiratory tract infection was the most commonly reported adverse event and occurred more frequently in the control group. Three cases (200 μg dose) of severe erythema that did not interfere with limb movement were reported. Four toddlers developed fever >40.0°C, 3 in the 200 μg group and 1 in the 60 μg group. Postdose 3, seroconversion (serum bactericidal activity assay using human complement ≥4-fold rise from baseline) was observed in 61.1-88.9% of participants against MnB strains expressing LP2086 variants homologous or nearly homologous to vaccine antigens and 11.1-44.4% against MnB strains expressing heterologous LP2086 variants. Seroconversion was observed in 77.8-100% of participants against additional, exploratory MnB strains expressing vaccine-homologous or heterologous LP2086 variants. This study shows that the bivalent rLP2086 vaccine is well tolerated and immunogenic in toddlers.

Benchmarking on Inspection Practices. First Triennial Report of the Working Group on Inspection Practices

International Nuclear Information System (INIS)

2017-01-01

The WGIP Nuclear Power Plant (NPP) Observed Inspection Practices Program is intended to promote co-operation and learning among member countries and to collect and provide them with information for improving the effectiveness of existing regulatory inspection practices. This is accomplished by observing how inspections are carried out by other member countries and issuing a WGIP observed inspection report that includes observations (e.g. inspection techniques, obstacles encountered), lessons learnt and potential commendable practices that could be used by a regulatory body. This first triennial report documents the results of a consistency check performed between all six WGIP observed inspection reports and ratifies certain observations, lessons learnt and potential commendable practices identified by WGIP observed inspection participants

76 FR 41432 - Airworthiness Directives; Gulfstream Aerospace LP (Type Certificate Previously Held by Israel...

Science.gov (United States)

2011-07-14

... Aerospace LP (Type Certificate Previously Held by Israel Aircraft Industries, Ltd.) Model Galaxy, Gulfstream... proposed AD. Discussion The Civil Aviation Authority (CAA), which is the aviation authority for Israel, has... Held by Israel Aircraft Industries, Ltd.): Docket No. FAA-2011-0716; Directorate Identifier 2011-NM-013...

75 FR 36296 - Airworthiness Directives; Gulfstream Aerospace LP (Type Certificate Previously Held by Israel...

Science.gov (United States)

2010-06-25

... Airworthiness Directives; Gulfstream Aerospace LP (Type Certificate Previously Held by Israel Aircraft... contact we receive about this proposed AD. Discussion The Civil Aviation Authority of Israel (CAAI), which is the aviation authority for Israel, has issued Israeli Airworthiness Directive 01-10-01-07R1, dated...

The Effects of Curcuma longa L., Purple Sweet Potato, and Mixtures of the Two on Immunomodulation in C57BL/6J Mice Infected with LP-BM5 Murine Leukemia Retrovirus.

Science.gov (United States)

Park, Soo-Jeung; Lee, Dasom; Lee, Minhee; Kwon, Han-Ol; Kim, Hyesook; Park, Jeongjin; Jeon, Woojin; Cha, Minseok; Jun, Suhwa; Park, Kwangjin; Lee, Jeongmin

2018-06-04

The immune response is stimulated to protect the body from external antigens and is controlled by several types of immune cells. In the present study, the immunomodulatory effects of Curcuma longa L., purple sweet potato, and mixtures of the two (CPM) were investigated in C57BL/6 mice infected with LP-BM5 murine leukemia virus (MuLV). Mice were divided into seven groups as follows: normal control, infected control (LP-BM5 MuLV infection), positive control (LP-BM5 MuLV infection+dietary supplement of red ginseng 300 mg/kg body weight), the original powder of C. longa L. (C; LP-BM5 MuLV infection+dietary supplement of C 189 mg/kg body weight), the original powder of purple sweet potato (P; LP-BM5 MuLV infection+dietary supplement of P 1811 mg/kg body weight), CPM Low (CPL; LP-BM5 MuLV infection+CPM 2 g/kg body weight), and CPM High (CPH; LP-BM5 MuLV infection+CPM 5 g/kg body weight). Dietary supplementation lasted for 12 weeks. Dietary supplementation of CPM inhibited LP-BM5 MuLV-induced lymphadenopathy and splenomegaly and inhibited reduction of messenger RNA (mRNA) expression of major histocompatibility complex (MHC) I and II. Moreover, CPM reduced the decrease in T- and B cell proliferation, reduced the population of CD4(+)/CD8(+) T cells, and remedied the unbalanced production of T helper-1 (Th1)/T helper-2 (Th2) cytokines in LP-BM5 MuLV-infected mice. In addition, CPM inhibited reduction of phagocytosis in peritoneal macrophages and decreased serum levels of immunoglobulin A (IgA), immunoglobulin E (IgE), and immunoglobulin G (IgG). These results suggest that CPM had a positive effect on immunomodulation in C57BL/6 mice induced by LP-BM5 leukemia retrovirus infection.

Increased hepatic cholesterol esterification with essential fatty acid deficiency (EFAD): relationship to plasma lipoprotein (LP) cholesterol content

International Nuclear Information System (INIS)

Ney, D.M.; Ziboh, V.A.; Schneeman, B.O.

1986-01-01

EFAD in the rat is associated with hepatic accumulation of esterified cholesterol and altered distribution of cholesterol between plasma and hepatic tissue. Little is known regarding the impact of EFAD on LP composition. To determine the relationship between hepatic cholesterol esterification and plasma lP composition in control (C) and EFAD male Wistar rats, the authors induced EFAD with continuous intragastric (IG) infusion of EFA-free solutions containing 3.5% of calories as triolein for 7 and 14 days. C animals received IG infusion of solutions containing 3.5% of calories as linoleic acid. Data in the EFAD groups reveal: (i) marked decreases in hepatic EFAs and increases in monoenoic acids; (ii) progressive increases in hepatic content of triglyceride and esterified cholesterol with 7 and 14 days of feeding; (iii) assay of acyl CoA:cholesterol acyltransferase activity in hepatic tissue using 14 C-cholesterol demonstrates an increase in hepatic cholesterol esterification when compared to C animals. Increased hepatic cholesterol esterification correlates with elevated levels of esterified cholesterol in plasma VLDL and HDL particles. These data indicate that the elevated levels of cholesterol esters in LP particles is due, at least in part, to increased hepatic cholesterol esterification with EFAD

Remarks on the Phragmen-Lindelof theorem for Lp-viscosity solutions of fully nonlinear PDEs with unbounded ingredients

Directory of Open Access Journals (Sweden)

Kazushige Nakagawa

2009-11-01

Full Text Available The Phragmen-Lindelof theorem for Lp-viscosity solutions of fully nonlinear second order elliptic partial differential equations with unbounded coefficients and inhomogeneous terms is established.

Seismic aftershock monitoring for on-site inspection purposes. Experience from Integrated Field Exercise 2008.

Science.gov (United States)

Labak, P.; Arndt, R.; Villagran, M.

2009-04-01

One of the sub-goals of the Integrated Field Experiment in 2008 (IFE08) in Kazakhstan was testing the prototype elements of the Seismic aftershock monitoring system (SAMS) for on-site inspection purposes. The task of the SAMS is to collect the facts, which should help to clarify nature of the triggering event. Therefore the SAMS has to be capable to detect and identify events as small as magnitude -2 in the inspection area size up to 1000 km2. Equipment for 30 mini-arrays and 10 3-component stations represented the field equipment of the SAMS. Each mini-array consisted of a central 3-component seismometer and 3 vertical seismometers at the distance about 100 m from the central seismometer. The mini-arrays covered approximately 80% of surrogate inspection area (IA) on the territory of former Semipalatinsk test site. Most of the stations were installed during the first four days of field operations by the seismic sub-team, which consisted of 10 seismologists. SAMS data center comprised 2 IBM Blade centers and 8 working places for data archiving, detection list production and event analysis. A prototype of SAMS software was tested. Average daily amount of collected raw data was 15-30 GB and increased according to the amount of stations entering operation. Routine manual data screening and data analyses were performed by 2-6 subteam members. Automatic screening was used for selected time intervals. Screening was performed using the Sonoview program in frequency domain and using the Geotool and Hypolines programs for screening in time domain. The screening results were merged into the master event list. The master event list served as a basis of detailed analysis of unclear events and events identified to be potentially in the IA. Detailed analysis of events to be potentially in the IA was performed by the Hypoline and Geotool programs. In addition, the Hyposimplex and Hypocenter programs were also used for localization of events. The results of analysis were integrated

47 CFR 74.1204 - Protection of FM broadcast, FM Translator and LP100 stations.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 4 2010-10-01 2010-10-01 false Protection of FM broadcast, FM Translator and... SERVICES FM Broadcast Translator Stations and FM Broadcast Booster Stations § 74.1204 Protection of FM broadcast, FM Translator and LP100 stations. (a) An application for an FM translator station will not be...

How Agencies Inspect. A Comparative Study of Inspection Policies in Eight Swedish Government Agencies

International Nuclear Information System (INIS)

Lindblom, Lars; Clausen, Jonas; Edvardsson, Karin; Hayenhielm, Madeleine; Hermansson, Helene; Nihlen, Jessica; Palm, Elin; Ruden, Christina; Wikman, Per; Hansson, Sven Ove

2003-04-01

Eight Swedish authorities with inspection tasks in the areas of health, safety, and environmental protection have been compared, namely the authorities responsible for nuclear safety, radiation protection, railway, marine and aviation safety, environmental protection, chemicals control, and health and safety on workplaces. Significant differences in inspection policies and practices between the authorities were found, such as: diverging definitions of supervision and inspection that complicate comparisons, different priority-setting principles for inspections, variations in inspection frequencies (between 13 and 0.03 inspections per company and year), different practices with respect to notifying companies before inspection visits, and in particular, large differences in the extent to which non-compliance with regulations is reported to legal authorities. It was concluded that these agencies have much to gain from increasing their cooperation in methods development, evaluation studies, and education of inspectors

Incore inspection device

International Nuclear Information System (INIS)

Ogisu, Tatsuki; Taguchi, Kosei.

1995-01-01

The device of the present invention can inspect surfaces of equipments in reactor water in a nuclear reactor in a state of atmospheric air. Namely, an inspection device is movable forwardly and backwardly in a water-proof vessel. An annular sucker with pleats is disposed to the outer side of a lid of the water-proof vessel. A television camera for an under water monitoring is disposed to the inner side of the lid of the water-proof vessel by way of a partitioning wall with lid. Transferring screws are disposed at the back and on the side of the water-proof vessel. In the device having such a constitution, (1) the inside of the water-proof vessel is at first made water-tight by closing the partitioning wall with lid, (2) the back and the side screws are operated by the guide of the underwater monitoring television camera, to transfer the water-proof vessel to the surface of the reactor core to be inspected, (3) the annular sucker with pleats is urged on the surface to be inspected by the back screw, to fix the water-proof vessel, (4) reactor water in a space of the annular sucker with pleats is discharged and replaced with air, and (5) the lid of the partition wall with lid is opened and the inspection device is disposed at a position of the underwater monitoring television camera, to inspect the surface to be inspected in a state of atmospheric air. (I.S.)

Pressurized water reactor inspection procedures

International Nuclear Information System (INIS)

Heinrich, D.; Mueller, G.; Otte, H.J.; Roth, W.

1998-01-01

Inspections of the reactor pressure vessels of pressurized water reactors (PWR) so far used to be carried out with different central mast manipulators. For technical reasons, parallel inspections of two manipulators alongside work on the refueling cavity, so as to reduce the time spent on the critical path in a revision outage, are not possible. Efforts made to minimize the inspection time required with one manipulator have been successful, but their effects are limited. Major reductions in inspection time can be achieved only if inspections are run with two manipulators in parallel. The decentralized manipulator built by GEC Alsthom Energie and so far emmployed in boiling water reactors in the USA, Spain, Switzerland and Japan allows two systems to be used in parallel, thus reducing the time required for standard inspection of a pressure vessel from some six days to three days. These savings of approximately three days are made possible without any compromises in terms of positioning by rail-bound systems. During inspection, the reactor refueling cavity is available for other revision work without any restrictions. The manipulator can be used equally well for inspecting standard PWR, PWR with a thermal shield, for inspecting the land between in-core instrumentation nozzles, BWR with and without jet pumps (complementary inspection), and for inspecting core support shrouds. (orig.) [de

Sensitivity analysis for CORSOR models simulating fission product release in LOFT-LP-FP-2 severe accident experiment

Energy Technology Data Exchange (ETDEWEB)

Hoseyni, Seyed Mohsen [Islamic Azad Univ., Tehran (Iran, Islamic Republic of). Dept. of Basic Sciences; Islamic Azad Univ., Tehran (Iran, Islamic Republic of). Young Researchers and Elite Club; Pourgol-Mohammad, Mohammad [Sahand Univ. of Technology, Tabriz (Iran, Islamic Republic of). Dept. of Mechanical Engineering; Yousefpour, Faramarz [Nuclear Science and Technology Research Institute, Tehran (Iran, Islamic Republic of)

2017-03-15

This paper deals with simulation, sensitivity and uncertainty analysis of LP-FP-2 experiment of LOFT test facility. The test facility simulates the major components and system response of a pressurized water reactor during a LOCA. MELCOR code is used for predicting the fission product release from the core fuel elements in LOFT LP-FP-2 experiment. Moreover, sensitivity and uncertainty analysis is performed for different CORSOR models simulating release of fission products in severe accident calculations for nuclear power plants. The calculated values for the fission product release are compared under different modeling options to the experimental data available from the experiment. In conclusion, the performance of 8 CORSOR modeling options is assessed for available modeling alternatives in the code structure.

Research on the Dividend Policy of Listed Company and Fluctuation Effect of Stock Market

Directory of Open Access Journals (Sweden)

Wang Hua

2015-01-01

Full Text Available Based on the dividend policy and theory, this article takes the events that A stock of all the listed banking companies (16 in total issued dividend in the CSI stock market for 5 years from 2008 to 2012 as the investigation samples to inspect the relevance of dividend policy with the fluctuation of stock price and transaction volume, thus to prove the dividend policy is an efficient mechanism for information transmission.

77 FR 73089 - Cambria Investment Management, L.P. and Cambria ETF Trust; Notice of Application

Science.gov (United States)

2012-12-07

... Investment Management, L.P. and Cambria ETF Trust; Notice of Application November 30, 2012. AGENCY... (e) certain registered management investment companies and unit investment trusts outside of the same... Jennifer L. Sawin, Branch Chief, at (202) 551-6821 (Division of Investment Management, Office of Investment...

77 FR 74884 - Cambria Investment Management, L.P. and Cambria ETF Trust; Notice of Application

Science.gov (United States)

2012-12-18

... Investment Management, L.P. and Cambria ETF Trust; Notice of Application December 12, 2012. AGENCY... request an order that permits: (a) Actively-managed series of certain open-end management investment... registered management investment companies and unit investment trusts outside of the same group of investment...

QTL list - PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available List Contact us PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods ...Policy | Contact Us QTL list - PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods | LSDB Archive ...

Marker list - PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available List Contact us PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods ...Database Site Policy | Contact Us Marker list - PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods | LSDB Archive ...

Development of a robotic nozzle inspection with a flexible transducer array

International Nuclear Information System (INIS)

Dobigny, Blandine; Wattiau, Olivier; Bey, Sebastien; Vanhoye, Arnaud; Ancrenaz, Patrick; Dumas, Philippe; Fournier, Laurent

2016-01-01

The evaluation of the integrity of the nuclear plant components is a major issue. It is mandatory to assess the degradation due to the aging. NDE aim is to detect potential defects, resulting of thermal fatigue, and to be able to evaluate their dimensions. Ultrasonic non destructive testing has demonstrated its efficiency for detection and characterization of such defects and industrial probes offer satisfactory results in various applications. However, the complex geometry of some components (nozzle,..) severely limits the inspection performances. Indeed, the use of conventional probes is restricted to regular surfaces. Flexible transducer arrays technology provides an attractive solution in ultrasonic NDT for the inspection of complex geometry components. Its ability to conform to the wavy surface of the component and to ensure a good coupling when the limits of conventional probes are reached, makes it suitable for the characterization of a defect detected in a nozzle. To develop and implement a flexible probe inspection of a nozzle weld, several skills are needed: especially ultrasonic, robotic, simulation skills. Moreover, an innovative tool dedicated to delay laws and probe position calculation is used to optimize the performance of such phased array probes. In the framework of a partnership, EDF, the CEA LIST and AREVA have developed a robotic inspection tool able to be operate on nuclear site, in order to characterize defects located in the inner radius of a nozzle with a flexible transducer array. The article describes the use of the new tools developed for the nozzle case. It also presents acquisition results and the contribution of this technology of potential defect characterization. These results are compared to classical phased-array methods.

From PISC to risk informed inspection

International Nuclear Information System (INIS)

Crutzen, S.; Lemaitre, P.; Fabbri, L.

1998-01-01

In this paper the correlation between inspection effectiveness, inspection qualification and risk informed inspection will be treated in view of harmonisation of inspection of nuclear plant components. Through the different phases of the PISC programme the necessity has been demonstrated to show the effectiveness of the inspection through a formal process of qualification in order to ensure that a certain level of effectiveness has been reached. Inspection qualification is indeed the way to quantify the capability level of inspection techniques used. The targets to be met by the inspection is information which should be obtained from risk based analyses. (author)

77 FR 66651 - Salient Advisors, L.P. and MarketShares ETF Trust; Notice of Application

Science.gov (United States)

2012-11-06

... Advisors, L.P. and MarketShares ETF Trust; Notice of Application October 31, 2012 AGENCY: Securities and... ETF Trust (the ``Trust''). Summary of Application: Applicants request an order that permits: (a... statutory trust. The Trust will initially offer one series, the Salient MLP and Energy Infrastructure ETF...

Implementing and analyzing the multi-threaded LP-inference

Science.gov (United States)

Bolotova, S. Yu; Trofimenko, E. V.; Leschinskaya, M. V.

2018-03-01

The logical production equations provide new possibilities for the backward inference optimization in intelligent production-type systems. The strategy of a relevant backward inference is aimed at minimization of a number of queries to external information source (either to a database or an interactive user). The idea of the method is based on the computing of initial preimages set and searching for the true preimage. The execution of each stage can be organized independently and in parallel and the actual work at a given stage can also be distributed between parallel computers. This paper is devoted to the parallel algorithms of the relevant inference based on the advanced scheme of the parallel computations “pipeline” which allows to increase the degree of parallelism. The author also provides some details of the LP-structures implementation.

RIMACS, Reactor Inspection Main Control System

International Nuclear Information System (INIS)

2008-01-01

1 - Description of program or function: RIMACS prepares for automatic inspection files on each inspection item for the reactor. These automatic inspection files provide the data to move RIROB (Reactor Inspection Robot) with laser by interpreting the coordinates of LASPO (Laser Positioner) and the laser detecting device of RIROB in three dimensional space. In addition, when RIROB arrives at the inspecting location, the files provide all values of the manipulator's motions to acquire the ultrasonic data. RIMACS provides various modules in order to perform these complex functions, and the functions are programmed on graphic user interface for the convenience of the user. RIMACS provides various functions, such as insertion of reactor production data, selection of the reactor for inspection, the creation of automatic inspection file, the selection of the inspection item, inspection simulation, and automatic inspection procedures. It also provides all other functions, which are necessary for the inspection, such as operating program download and manual control of LASPO and RIROB, the inspection simulation and the inspection status display by means of the graphic screen, and SODAS (ultra-Sonic Data Acquisition System) drive verification. 2 - Methods: Moving path and operation procedures for inspection robot are generated automatically with Kinematics algorithm. 3 - Restrictions on the complexity of the problem: A graphics display with MS-Window capability is required

The lipid- and lipoprotein- [LDL-Lp(a)] apheresis techniques. Updating.

Science.gov (United States)

Stefanutti, C; Morozzi, C; Perrone, G; Di Giacomo, S; Vivenzio, A; D'Alessandri, G

2012-01-01

Therapeutic plasmapheresis allows the extracorporeal removal of plasmatic lipoproteins (Lipid-apheresis) (LA). It can be non selective (non specific), semi - selective or selective low density lipoprotein-lipoprotein(a) (specific [LDL- Lp(a)] apheresis) (Lipoprotein apheresis, LDLa). The LDL removal rate is a perfect parameter to assess the system efficiency. Plasma-Exchange (PEX) cannot be considered either specific nor, selective. In PEX the whole blood is separated into plasma and its corpuscular components usually through centrifugation or rather filtration. The corpuscular components mixed with albumin solution plus saline (NaCl 0.9%) solution at 20%-25%, are then reinfused to the patient, to substitute the plasma formerly removed. PEX eliminates atherogenic lipoproteins, but also other essential plasma proteins, such as albumin, immunoglobulins, and hemocoagulatory mediators. Cascade filtration (CF) is a method based on plasma separation and removal of plasma proteins through double filtration. During the CF two hollow-fiber filters with pores of different diameter are used to eliminate the plasma components of different weight and molecular diameter. A CF system uses a first polypropylene filter with 0.55 µm diameter pores and a second one of diacetate of cellulose with 0.02 µm pores. The first filter separates the whole blood, and the plasma is then perfused through a second filter which allows the recovery of molecules with a diameter lower than 0.02 µm, and the removal of molecules larger in diameter as apoB100-containing lipoproteins. Since both albumin and immunoglobulins are not removed, or to a negligible extent, plasma-expanders, substitution fluids, and in particular albumin, as occurs in PEX are not needed. CF however, is characterized by lower selectivity since removes also high density lipoprotein (HDL) particles which have an antiatherogenic activity. In the 80's, a variation of Lipid-apheresis has been developed which allows the LDL

Technical objectives of inspection

International Nuclear Information System (INIS)

Sorenson, R.J.; Stewart, K.B.; Schneider, R.A.

1976-01-01

The various technical objectives of inspection are discussed in a very general manner. The discussion includes how the inspection function is related to the assumed threat, the various degrees of assurance and reliance on criteria, and the hierarchy of assurance which is obtained from the various types or levels of inspection

Development and Applicability Demonstration of a Remote Inspection Module for Inspection of Reactor Internals in an SFR

International Nuclear Information System (INIS)

Kim, Hoewoong; Joo, Youngsang; Park, Changgyu; Kim, Jongbum; Bae, Jinho

2014-01-01

Since liquid sodium is optically opaque, the ultrasonic inspection technique has been mainly employed for inspection of reactor internals in a Sodium-cooled Fast Reactor (SFR). Until now, two types of ultrasonic sensors have been mainly developed; immersion and waveguide sensors. An immersion sensor can provide a high-resolution image, but it may have problems in terms of reliability and life time because the sensor is exposed to high temperature during inspection. On the other hand, a waveguide sensor can maintain its performance during long-term inspection in high temperature because it installs an ultrasonic transducer in a cold region even though such a high-frequency ultrasonic wave cannot be used owing to the long propagation distance [4-6]. In this work, a remote inspection module employing four 10 m long waveguide sensors was newly developed and several performance tests were carried out in water to demonstrate the applicability of the developed remote inspection module to inspection of reactor internals in an SFR. In this work, a remote inspection module for inspection of reactor internals in an SFR was newly developed. The developed remote inspection module employs four 10 m long waveguide sensors for multiple inspection applications: a horizontal beam waveguide sensor for ranging inspection, two vertical beam waveguide sensors for viewing inspection and a 45 .deg. angle beam waveguide sensor for identification inspection. Several performance tests such as ranging, viewing and identification inspections were carried out for simulated nuclear fuel assembly specimens in water, and the applicability of the developed remote inspection module to inspection of reactor internals in an SFR was demonstrated

Development and Applicability Demonstration of a Remote Inspection Module for Inspection of Reactor Internals in an SFR

Energy Technology Data Exchange (ETDEWEB)

Kim, Hoewoong; Joo, Youngsang; Park, Changgyu; Kim, Jongbum [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Bae, Jinho [National Fusion Research Institute, Daejeon (Korea, Republic of)

2014-05-15

Since liquid sodium is optically opaque, the ultrasonic inspection technique has been mainly employed for inspection of reactor internals in a Sodium-cooled Fast Reactor (SFR). Until now, two types of ultrasonic sensors have been mainly developed; immersion and waveguide sensors. An immersion sensor can provide a high-resolution image, but it may have problems in terms of reliability and life time because the sensor is exposed to high temperature during inspection. On the other hand, a waveguide sensor can maintain its performance during long-term inspection in high temperature because it installs an ultrasonic transducer in a cold region even though such a high-frequency ultrasonic wave cannot be used owing to the long propagation distance [4-6]. In this work, a remote inspection module employing four 10 m long waveguide sensors was newly developed and several performance tests were carried out in water to demonstrate the applicability of the developed remote inspection module to inspection of reactor internals in an SFR. In this work, a remote inspection module for inspection of reactor internals in an SFR was newly developed. The developed remote inspection module employs four 10 m long waveguide sensors for multiple inspection applications: a horizontal beam waveguide sensor for ranging inspection, two vertical beam waveguide sensors for viewing inspection and a 45 .deg. angle beam waveguide sensor for identification inspection. Several performance tests such as ranging, viewing and identification inspections were carried out for simulated nuclear fuel assembly specimens in water, and the applicability of the developed remote inspection module to inspection of reactor internals in an SFR was demonstrated.

Inspection Strategies for Concrete Bridges

DEFF Research Database (Denmark)

Sørensen, John Dalsgaard; Thoft-Christensen, Palle

1989-01-01

In this paper an optimal inspection strategy for concrete bridges based on periodic routine and detailed inspections is presented. The failure mode considered is corrosion of the reinforcement due to chlorides. A simple modelling of the corrosion and of the inspection strategy is presented....... The optimal inspection strategy is determined from an optimization problem, where the design variables are time intervals between detailed inspections and the concrete cover. The strategy is illustrated on a simple structure, namely a reinforced concrete beam....

9 CFR 381.76 - Post-mortem inspection, when required; extent; traditional, Streamlined Inspection System (SIS...

Science.gov (United States)

2010-01-01

...; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION POULTRY PRODUCTS... (NELS) Inspection System, both of which shall be used only for broilers and cornish game hens; the New... Inspection. (i) The SIS shall be used only for broilers and cornish game hens if: (a) The Administrator...

Influence of fruit drinks with or without lactobacillus Lp299v on the gastrointestinal uptake of paracetamol in man

DEFF Research Database (Denmark)

Akerman, Ulrika; Edvinsson, Lars

2009-01-01

subjects consuming 200 ml of water, Rose hip drink or Proviva together with 1.5 gram of paracetamol. FINDINGS: The concentration of paracetamol in plasma increased rapidly when the paracetamol-containing tablets were consumed together with water and after 30 minutes a median level of 90 mumol/l was reached...... concentration and in time to maximal paracetamol concentration. The median maximal paracetamol concentration was 147 mumol/l for water, which is significantly higher than the median for rosehip drink with Lp299v,113.5 mumol/l, and than the median for rosehip-drink without Lp299v, 106.5 mumol/l (p = 0.002, and p...

78 FR 42889 - Pipeline Safety: Reminder of Requirements for Utility LP-Gas and LPG Pipeline Systems

Science.gov (United States)

2013-07-18

... DEPARTMENT OF TRANSPORTATION Pipeline and Hazardous Materials Safety Administration 49 CFR Part 192 [Docket No. PHMSA-2013-0097] Pipeline Safety: Reminder of Requirements for Utility LP-Gas and LPG Pipeline Systems AGENCY: Pipeline and Hazardous Materials Safety Administration (PHMSA), DOT. ACTION...

Inspection of disposal canisters components

International Nuclear Information System (INIS)

Pitkaenen, J.

2013-12-01

This report presents the inspection techniques of disposal canister components. Manufacturing methods and a description of the defects related to different manufacturing methods are described briefly. The defect types form a basis for the design of non-destructive testing because the defect types, which occur in the inspected components, affect to choice of inspection methods. The canister components are to nodular cast iron insert, steel lid, lid screw, metal gasket, copper tube with integrated or separate bottom, and copper lid. The inspection of copper material is challenging due to the anisotropic properties of the material and local changes in the grain size of the copper material. The cast iron insert has some acoustical material property variation (attenuation, velocity changes, scattering properties), which make the ultrasonic inspection demanding from calibration point of view. Mainly three different methods are used for inspection. Ultrasonic testing technique is used for inspection of volume, eddy current technique, for copper components only, and visual testing technique are used for inspection of the surface and near surface area

Radiation control in the nondestructive inspection

International Nuclear Information System (INIS)

Kariya, Yukihiro

1982-01-01

In the early days of radiation nondestructive inspection about ten years ago, the loss of radiation sources and careless radiation exposure gave the impression of radiography inspection being immediately slipshod management. In this problem, the peculiar nature of the business in this field is involved. In Nondestructive Inspection Co., Ltd., besides the safety management of radioisotopes, the radiation exposure control of personnel in the regular inspection of nuclear power plants has become increasingly important. The following matters are described: radiation utilization in nondestructive inspection (X- and #betta#-ray radiography, #betta#-ray leak test on shield), radiation control problems in nondestructive inspection business (the peculiar aspects of the business, the analysis of the incidents related with nondestructive inspection), and the practice of radiation control in nondestructive inspection in Nondestructive Inspection Co., Ltd. (Mori, K.)

76 FR 71014 - Idaho Power Company, IDACORP Energy, L.P., IDACORP, Inc.; Notice of Petition

Science.gov (United States)

2011-11-16

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. IN03-9-000] Idaho Power Company, IDACORP Energy, L.P., IDACORP, Inc.; Notice of Petition Take notice that on September 9, 2011..., 2003,\\1\\ filed a petition to terminate Appendix B, Appendix C, and Appendix E to the Settlement...

77 FR 30589 - SteelRiver Infrastructure Partners LP, SteelRiver Infrastructure Associates LLC, SteelRiver...

Science.gov (United States)

2012-05-23

... will acquire all of the common stock of Patriot from Patriot Rail Holdings LLC, and thereby indirect... America LP, and Patriot Funding LLC--Control Exemption--Patriot Rail Corp., et al. SteelRiver... notice of exemption to acquire control of Patriot Rail Corp. (Patriot) and its rail carrier subsidiaries...

Estimation of inspection effort

International Nuclear Information System (INIS)

Mullen, M.F.; Wincek, M.A.

1979-06-01

An overview of IAEA inspection activities is presented, and the problem of evaluating the effectiveness of an inspection is discussed. Two models are described - an effort model and an effectiveness model. The effort model breaks the IAEA's inspection effort into components; the amount of effort required for each component is estimated; and the total effort is determined by summing the effort for each component. The effectiveness model quantifies the effectiveness of inspections in terms of probabilities of detection and quantities of material to be detected, if diverted over a specific period. The method is applied to a 200 metric ton per year low-enriched uranium fuel fabrication facility. A description of the model plant is presented, a safeguards approach is outlined, and sampling plans are calculated. The required inspection effort is estimated and the results are compared to IAEA estimates. Some other applications of the method are discussed briefly. Examples are presented which demonstrate how the method might be useful in formulating guidelines for inspection planning and in establishing technical criteria for safeguards implementation

Bridging of inspection with corrosion management

International Nuclear Information System (INIS)

Zamaluddin Ali; Mohd Hawari Hassan; Rohana Jaafar

2009-01-01

Formerly, Inspection and Corrosion Engineers have less interaction and sharing of information to each other even they are working in the same plant or organization. Inspection finding either from visual inspection or NDT techniques rarely shared with corrosion engineers. Similarly corrosion engineers rarely discussed their corrosion prediction and potential damage mechanism with inspection engineers. A demanding request of more holistic plant safety and asset integrity promoted the introduction and implementation of Risk Based Inspection (RBI). RBI analysis demands the input mainly from both disciplines i.e. Inspection and Corrosion Engineers. Most of RBI methodologies are once-off analysis approach which also promoted once-off interaction between Inspection and Corrosion Engineers. PETRONAS has developed a methodology with supporting software, integrating both Inspection and Corrosion disciplines. PETRONAS Risk Based Inspection (PRBI) is intended to promote continuous integration of Inspection and Corrosion management of the plant through out the whole life cycle starting from the design stage to fabrication, operation and decommissions stage. (author)

Postirradiation examination results from the LP-FP-2 center fuel module

International Nuclear Information System (INIS)

Jensen, S.M.; Akers, D.W.

1990-01-01

The LP-FP-2 experiment was conducted on July 9, 1985 in the Loss of Fluid Test (LOFT) facility located at the Idaho National Engineering Laboratory (INEL). The primary purpose of this experiment was to provide information of the release, transport, and deposition of fission products and aerosols during a sever core damage event performed in a large scale nuclear reactor facility. Postirradiation nondestructive and destructive examinations of the fuel bundle provided information to assist in achieving this objective, as well as providing information on the material behavior and interactions that occurred within the fuel bundle during this sever core damage experiment. This was a large-scale integral test, incorporating an 11 x 11 array of fuel rods, control rods, and instrumentation tubes, with an active core length of 1.68 m. Peak temperatures in the fuel bundle exceeded 2100 K or approximately 4.5 min, with localized peak temperatures exceeding the melting point of the UO 2 fuel (3120 K). Large amounts of zircaloy oxidation and material relocation occurred during the experiment. The transient phase was terminated by a rapid reflood of cooling water, which resulted in significant oxidation and hydrogen generation. Zircaloy oxidation during the reflood period caused a rapid temperature excursion to occur in the upper two-thirds of the fuel bundle. This article summarizes the data and analysis from the postirradiation examinations of the LP-FP-2 fuel bundle. 12 refs., 39 figs., 8 tabs

PDBlocal: A web-based tool for local inspection of biological macromolecular 3D structures

Directory of Open Access Journals (Sweden)

Pan Wang

2018-03-01

Full Text Available Functional research on biological macromolecules must focus on specific local regions. PDBlocal is a web-based tool developed to overcome the limitations of traditional molecular visualization tools for three-dimensional (3D inspection of local regions. PDBlocal provides an intuitive and easy-to-manipulate web page interface and some new useful functions. It can keep local regions flashing, display sequence text that is dynamically consistent with the 3D structure in local appearance under multiple local manipulations, use two scenes to help users inspect the same local region with different statuses, list all historical manipulation statuses with a tree structure, allow users to annotate regions of interest, and save all historical statuses and other data to a web server for future research. PDBlocal has met expectations and shown satisfactory performance for both expert and novice users. This tool is available at http://labsystem.scuec.edu.cn/pdblocal/.

Listening to people to cure people: the LpCp - tool, an instrument to evaluate hospital humanization.

Science.gov (United States)

Buffoli, M; Bellini, E; Bellagarda, A; Di Noia, M; Nickolova, M; Capolongo, S

2014-01-01

In the healthcare environment, nowadays, only a few among the available evaluation systems pay enough attention to certain social sustainability aspects. Among these, humanization plays a key role in an environment, like hospitals, where the mental and physical well-being of patients and healthcare operators is crucial. Our research project, known as 'SustHealth', is focused on the deficiencies of the evaluation methodology and aims at developing an assessment system related to a questionnaire-based investigation capable of revealing the most influential conditions and dynamics in people's hospital experience, while also recommending areas in hospitals where efforts can be made to sustain improvement strategies. The humanization of healthcare structures began with a significant investigation to assess all the major evaluation tools in both hospitals - to better understand the physical and emotional interactions in the structure-user ratio - and other areas. This helped understand the strengths and criticalities of the systems that were examined. This first step also allowed to shed light on the most important aspects to keep in mind when developing an evaluation system. During the operational steps an all-new LpCp - tool (Listening to people to Cure people) was created, which includes a questionnaire-based investigation and processing software, and its application for beta-testing in a 600-bed hospital in Milan. The LpCp - tool proved to be effective and capable of finding the deficiencies and potential in the examined hospital. Considering different themes through alternative viewpoints (staff, patients/visitors, technicians, etc.), the tool has allowed underlining different perceptions of the same place and also provided sound information to guide healthcare management in taking informed decisions about specific problems or users. Former interesting results show an inadequate appraisal about e.g. on-site facilities or recreational activities and a lack of

Gentilly 2 steam generators Spring 2000 outage: tubesheet waterlance cleaning and inspection; upper bundle inspection

International Nuclear Information System (INIS)

Akeroyd, J.K.; Plante, S.

2000-01-01

A review of the secondary side maintenance activities recently completed during the Gentilly 2 Annual Spring 2000 Maintenance Outage. Activities included: 1) Tubesheet intertube waterlance cleaning and visual inspection, 2) First tube support plate, in-bundle visual inspection of the hot leg, and 3) Upper bundle tube support plate visual inspection. A description of the waterlancing and inspection equipment and setup in the RB at Gentilly 2 is provided. Several innovative techniques were successfully employed and yielded savings in critical path duration, labour and personnel radiation dose. These included accessing the SG tubesheet region through one handhole only and sludge removal utilizing the SG blowdown system. Plant personnel judged tubesheet sludge removal successful. Before and after results of the cleaning process along with samples of the visual inspection results are provided. Inspection of the first support plate, which was a repeat of an inspection done in 1997, was conducted along with an in-bundle inspection of the upper tube supports. Results are presented along with a discussion of the implications for future steam generator maintenance. (author)

78 FR 69147 - Ranger Alternative Management, L.P. and Ranger Funds Investment Trust; Notice of Application

Science.gov (United States)

2013-11-18

...] Ranger Alternative Management, L.P. and Ranger Funds Investment Trust; Notice of Application November 12... Application: Applicants request an order that would permit (a) certain open-end management investment... Units; and (e) certain registered management investment companies and unit investment trusts outside of...

Flamanville 3 EPR, Safety Assessment and On-site Inspections

International Nuclear Information System (INIS)

Piedagnel, Corinne; Tarallo, Francois; Monnot, Bernard

2011-01-01

As a Technical Support Organisation of the French Safety Authority (ASN), the IRSN carries out the safety assessment of EPR project design and participates in the ASN inspections performed at the construction site and in factories. The design assessment consists in defining the safety functions which should be ensured by civil structures, evaluating the EPR Technical Code for Civil works (ETC-C) in which EdF has defined design criteria and construction rules, and carrying out a detailed assessment of a selection of safety-related structures. Those detailed assessments do not consist of a technical control but of an analysis whose objectives are to ensure that design and demonstrations are robust, in accordance with safety and regulatory rules. Most assessments led IRSN to ask EdF to provide additional justification sometimes involving significant modifications. In the light of those complementary justifications and modifications, IRSN concluded that assessments carried out on design studies were globally satisfactory. The participation of IRSN to the on-site inspections led by ASN is a part of the global control of the compliance of the reactor with its safety objectives. For that purpose IRSN has defined a methodology and an inspection program intended to ASN: based on safety functions associated with civil works (confinement and resistance to aggressions), the corresponding behaviour requirements are identified and linked to a list of main civil works elements. During the inspections, deviations to the project's technical specifications or to the rules of the art were pointed out by IRSN. Those deviations cover various items, such as concrete fabrication, concrete pouring methodology, lack of reinforcement in some structures, unadapted welding procedures of the containment leak-tight steel liner and unsatisfactory treatment of concreting joints. The analysis of those problems has revealed flaws in the organisation of the contractors teams together with an

A study on improvements of inspection efficiency with remote transmission of inspection data

International Nuclear Information System (INIS)

Kikuchi, Masahiro

2010-01-01

Current information networks technology brought secure and convenient condition of information transmission, so that inspectorates intend to apply such technology to optimize current inspection efforts. IAEA established the Remote Monitoring Project (RMP) in 1996 and started to draft safeguards concepts, and approaches to refer the implementation of remote monitoring technology and to compromise with relationship between current inspection activities and the remote monitoring technologies. Although communications costs and conditions of secured communication should be further investigated, the technologies would have a possibility to reduce current inspection efforts. We would face at the step to study on the several issues such as what measures could be candidate to use, how much cost we needs, what kind of technical risks would be concerned, further improvements could be achieved by comparison with current inspection costs and effectiveness. This paper reports on the expectation points and relevant technical attention points which are related to apply unattended inspection system with remote data transmission to the flows and inventory verification of item and bulk facility, respectively, in order to improve inspection efforts. (author)

Study on the inspection item and inspection method of HTGR fuel

International Nuclear Information System (INIS)

Na, Sang Ho; Kim, Y. K.; Jeong, K. C.; Oh, S. C.; Cho, M. S.; Kim, Y. M.; Lee, Y. W.

2006-01-01

The type of HTGR(High Temperature Gas-cooled Reactor) fuel is different according to the reactor type. Generally the HTGR fuel has two types. One is a block type, which is manufactured in Japan or America. And the other is a pebble type, which is manufactured in China. Regardless of the fuel type, the fuel manufacturing process started from the coated particle, which is consisted of fuel kernel and the 4 coating layers. Korea has a plan to fabricate a HTGR fuel in near future. The appropriate quality inspection standards are requested to produce a sound and reliable coated particle for HTGR fuel. Therefore, the inspection items and the inspection methods of HTGR fuel between Japan and China, which countries have the manufacturing process, are investigated to establish a proper inspection standards of our product characteristics

Epstein-Barr virus nuclear antigen EBNA-LP is essential for transforming naïve B cells, and facilitates recruitment of transcription factors to the viral genome.

Science.gov (United States)

Szymula, Agnieszka; Palermo, Richard D; Bayoumy, Amr; Groves, Ian J; Ba Abdullah, Mohammed; Holder, Beth; White, Robert E

2018-02-01

The Epstein-Barr virus (EBV) nuclear antigen leader protein (EBNA-LP) is the first viral latency-associated protein produced after EBV infection of resting B cells. Its role in B cell transformation is poorly defined, but it has been reported to enhance gene activation by the EBV protein EBNA2 in vitro. We generated EBNA-LP knockout (LPKO) EBVs containing a STOP codon within each repeat unit of internal repeat 1 (IR1). EBNA-LP-mutant EBVs established lymphoblastoid cell lines (LCLs) from adult B cells at reduced efficiency, but not from umbilical cord B cells, which died approximately two weeks after infection. Adult B cells only established EBNA-LP-null LCLs with a memory (CD27+) phenotype. Quantitative PCR analysis of virus gene expression after infection identified both an altered ratio of the EBNA genes, and a dramatic reduction in transcript levels of both EBNA2-regulated virus genes (LMP1 and LMP2) and the EBNA2-independent EBER genes in the first 2 weeks. By 30 days post infection, LPKO transcription was the same as wild-type EBV. In contrast, EBNA2-regulated cellular genes were induced efficiently by LPKO viruses. Chromatin immunoprecipitation revealed that EBNA2 and the host transcription factors EBF1 and RBPJ were delayed in their recruitment to all viral latency promoters tested, whereas these same factors were recruited efficiently to several host genes, which exhibited increased EBNA2 recruitment. We conclude that EBNA-LP does not simply co-operate with EBNA2 in activating gene transcription, but rather facilitates the recruitment of several transcription factors to the viral genome, to enable transcription of virus latency genes. Additionally, our findings suggest that EBNA-LP is essential for the survival of EBV-infected naïve B cells.

Epstein-Barr virus nuclear antigen EBNA-LP is essential for transforming naïve B cells, and facilitates recruitment of transcription factors to the viral genome

Science.gov (United States)

Szymula, Agnieszka; Palermo, Richard D.; Bayoumy, Amr; Groves, Ian J.

2018-01-01

The Epstein-Barr virus (EBV) nuclear antigen leader protein (EBNA-LP) is the first viral latency-associated protein produced after EBV infection of resting B cells. Its role in B cell transformation is poorly defined, but it has been reported to enhance gene activation by the EBV protein EBNA2 in vitro. We generated EBNA-LP knockout (LPKO) EBVs containing a STOP codon within each repeat unit of internal repeat 1 (IR1). EBNA-LP-mutant EBVs established lymphoblastoid cell lines (LCLs) from adult B cells at reduced efficiency, but not from umbilical cord B cells, which died approximately two weeks after infection. Adult B cells only established EBNA-LP-null LCLs with a memory (CD27+) phenotype. Quantitative PCR analysis of virus gene expression after infection identified both an altered ratio of the EBNA genes, and a dramatic reduction in transcript levels of both EBNA2-regulated virus genes (LMP1 and LMP2) and the EBNA2-independent EBER genes in the first 2 weeks. By 30 days post infection, LPKO transcription was the same as wild-type EBV. In contrast, EBNA2-regulated cellular genes were induced efficiently by LPKO viruses. Chromatin immunoprecipitation revealed that EBNA2 and the host transcription factors EBF1 and RBPJ were delayed in their recruitment to all viral latency promoters tested, whereas these same factors were recruited efficiently to several host genes, which exhibited increased EBNA2 recruitment. We conclude that EBNA-LP does not simply co-operate with EBNA2 in activating gene transcription, but rather facilitates the recruitment of several transcription factors to the viral genome, to enable transcription of virus latency genes. Additionally, our findings suggest that EBNA-LP is essential for the survival of EBV-infected naïve B cells. PMID:29462212

The Ontario hydro low pressure turbine disc inspection program automated ultrasonic inspection systems - an overview

International Nuclear Information System (INIS)

Huggins, J.W.; Chopcian, M.; Grabish, M.

1990-01-01

An overview of the Ontario Hydro Low Pressure Turbine Disc Inspection Program is presented. The ultrasonic inspection systems developed in-house to inspect low pressure turbine discs at Pickering and Bruce Nuclear Generating stations are described. Three aspects of the program are covered: PART I - Background to inspection program, disc cracking experience, and development of an in-house inspection capability: PART II - System development requirements; ultrasonic equipment, electromechanical subsystems and instrumentation console: PART III - Customized software for flaw detection, sizing, data acquisition/storage, advanced signal processing, reports, documentation and software based diagnostics

Registered plant list - PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available List Contact us PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods ...the Plant DB link list in simple search page) Genome analysis methods Presence or... absence of Genome analysis methods information in this DB (link to the Genome analysis methods information ...base Site Policy | Contact Us Registered plant list - PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods | LSDB Archive ...

A Novel Method of Autonomous Inspection for Transmission Line based on Cable Inspection Robot LiDAR Data

Directory of Open Access Journals (Sweden)

Xinyan Qin

2018-02-01

Full Text Available With the growth of the national economy, there is increasing demand for electricity, which forces transmission line corridors to become structurally complicated and extend to complex environments (e.g., mountains, forests. It is a great challenge to inspect transmission line in these regions. To address these difficulties, a novel method of autonomous inspection for transmission line is proposed based on cable inspection robot (CIR LiDAR data, which mainly includes two steps: preliminary inspection and autonomous inspection. In preliminary inspection, the position and orientation system (POS data is used for original point cloud dividing, ground point filtering, and structured partition. A hierarchical classification strategy is established to identify the classes and positions of the abnormal points. In autonomous inspection, CIR can autonomously reach the specified points through inspection planning. These inspection targets are imaged with PTZ (pan, tilt, zoom cameras by coordinate transformation. The feasibility and effectiveness of the proposed method are verified by test site experiments and actual line experiments, respectively. The proposed method greatly reduces manpower and improves inspection accuracy, providing a theoretical basis for intelligent inspection of transmission lines in the future.

OSE inspections: A different perspective

International Nuclear Information System (INIS)

Ware, J.H.

1987-01-01

The Office of Security Evaluation (OSE) is a staff activity of the Assistant Secretary for Defense Programs (ASDP) and is responsible for the conduct of an inspection and evaluation program. The OSE Inspection Division conducts assessments of the effectiveness of Department of Energy (DOE) Safeguards and Security policies and protection programs. The inspections are conducted by OSE Inspectors and Support Specialists. Prior to the author's participation in the inspection of the San Francisco Operations Office, a DOE Field Office employee had never played an active role in an OSE Inspection of another field office. This paper discloses his experience as an OSE Inspector

Endoscopic inspection of steam turbines

International Nuclear Information System (INIS)

Maliniemi, H.; Muukka, E.

1990-01-01

For over ten years, Imatran Voima Oy (IVO) has developed, complementary inspection methods for steam turbine condition monitoring, which can be applied both during operation and shutdown. One important method used periodically during outages is endoscopic inspection. The inspection is based on the method where the internal parts of the turbine is inspected through access borings with endoscope and where the magnified figures of the internal parts is seen on video screen. To improve inspection assurance, an image-processing based pattern recognition method for cracks has been developed for the endoscopic inspection of turbine blades. It is based on the deduction conditions derived from the crack shape. The computer gives an alarm of a crack detection and prints a simulated image of the crack, which is then checked manually

78 FR 17389 - Texas Eastern Transmission, LP; Notice of Application for Certificate of Public Convenience and...

Science.gov (United States)

2013-03-21

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket Nos. CP13-84-000; PF12-19-000] Texas Eastern Transmission, LP; Notice of Application for Certificate of Public Convenience and Necessity and Authorization for Abandonment Take notice that on February 27, 2013, Texas Eastern...

75 FR 71122 - Erie Boulevard Hydropower L.P.; Notice of Scoping Meetings and Environmental Site Review

Science.gov (United States)

2010-11-22

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Project No. 7518-012--New York] Erie Boulevard Hydropower L.P.; Notice of Scoping Meetings and Environmental Site Review November 15, 2010. Commission staff will be conducting two public scoping meetings and an environmental site review in support...

Packaging supplier inspection guide

International Nuclear Information System (INIS)

Stromberg, H.M.; Gregg, R.E.; Kido, C.; Boyle, C.D.

1991-05-01

This is document is a guide for conducting quality assurance inspections of transportations packaging suppliers, where suppliers are defined as designers, fabricators, distributors, users, or owners of transportation packaging. This document can be used during an inspection to determine regulatory compliance within the requirements of 10 Code of Federal Regulations, Part 71, Subpart H (10 CFR 71.101--71.135). The guidance described in this document provides a framework for an inspection. It provides the inspector with the flexibility to adapt the methods and concepts presented here to meet the needs of the particular facility being inspected. The guide was developed to ensure a structured and consistent approach for inspections. The method treats each activity at a supplier facility as a separate entity (or functional element), and combines the activities within the framework of an ''inspection tree.'' The method separates each functional element into several areas of performance and then identifies guidelines, based on regulatory requirements, to be used to qualitatively rate each area. This document was developed to serve as a field manual to facilitate the work of inspectors. 1 ref., 1 fig., 5 tabs

Periodic and in-service inspection programs

International Nuclear Information System (INIS)

Dinu, M.

2000-01-01

Periodic and in-service inspection programs for Cernavoda NPP consists of periodic inspections of CANDU NPP components CSAN N-285.4 and CSAN N-285.4, in-service inspections and repair and modifications general inspection. Periodic inspection program document (PIPD) determines the systems and components subject to inspection, the category of the inspection, techniques, areas and other details.The current status of the inspection programs is presented, including containment , erosion/corrosion, pressure vessel support and snubbers, main steam lines inspection programs. Qualification program in Cernavoda NPP involves equipment qualification in the on-site laboratory, yearly certification, special equipment qualification in the National Institute of Metrology. All procedures are approved by the ISCIR (regulatory body for pressure vessel and lifting equipment) and CNCAN (National Commission on Nuclear Activities Control). Qualification of the personnel is performed according to the ISCIR Technical prescription CR 11/82 for up to 3 year period. Final qualification and licensing is performed by CNCAN

Enabling inspection solutions for future mask technologies through the development of massively parallel E-Beam inspection

Science.gov (United States)

Malloy, Matt; Thiel, Brad; Bunday, Benjamin D.; Wurm, Stefan; Jindal, Vibhu; Mukhtar, Maseeh; Quoi, Kathy; Kemen, Thomas; Zeidler, Dirk; Eberle, Anna Lena; Garbowski, Tomasz; Dellemann, Gregor; Peters, Jan Hendrik

2015-09-01

The new device architectures and materials being introduced for sub-10nm manufacturing, combined with the complexity of multiple patterning and the need for improved hotspot detection strategies, have pushed current wafer inspection technologies to their limits. In parallel, gaps in mask inspection capability are growing as new generations of mask technologies are developed to support these sub-10nm wafer manufacturing requirements. In particular, the challenges associated with nanoimprint and extreme ultraviolet (EUV) mask inspection require new strategies that enable fast inspection at high sensitivity. The tradeoffs between sensitivity and throughput for optical and e-beam inspection are well understood. Optical inspection offers the highest throughput and is the current workhorse of the industry for both wafer and mask inspection. E-beam inspection offers the highest sensitivity but has historically lacked the throughput required for widespread adoption in the manufacturing environment. It is unlikely that continued incremental improvements to either technology will meet tomorrow's requirements, and therefore a new inspection technology approach is required; one that combines the high-throughput performance of optical with the high-sensitivity capabilities of e-beam inspection. To support the industry in meeting these challenges SUNY Poly SEMATECH has evaluated disruptive technologies that can meet the requirements for high volume manufacturing (HVM), for both the wafer fab [1] and the mask shop. Highspeed massively parallel e-beam defect inspection has been identified as the leading candidate for addressing the key gaps limiting today's patterned defect inspection techniques. As of late 2014 SUNY Poly SEMATECH completed a review, system analysis, and proof of concept evaluation of multiple e-beam technologies for defect inspection. A champion approach has been identified based on a multibeam technology from Carl Zeiss. This paper includes a discussion on the

Evaluation of smoothing in an iterative lp-norm minimization algorithm for surface-based source localization of MEG

Science.gov (United States)

Han, Jooman; Sic Kim, June; Chung, Chun Kee; Park, Kwang Suk

2007-08-01

The imaging of neural sources of magnetoencephalographic data based on distributed source models requires additional constraints on the source distribution in order to overcome ill-posedness and obtain a plausible solution. The minimum lp norm (0 temporal gyrus.

Examination of the association between announced inspections and inspection scores.

Science.gov (United States)

Waters, A Blake; VanDerslice, James; Porucznik, Christina A; Kim, Jaewhan; DeLegge, Royal; Durrant, Lynne

2013-09-01

In 2010 the Salt Lake Valley Health Department conducted a pilot of an announced inspection program utilizing a randomized assignment of restaurants to an intervention group with announced inspections and a control group that remained on the usual schedule of unannounced inspections. After adjusting for food type, visible kitchen, outside quality assurance, season, and standardized inspector, significant reductions were found in the odds ratios of personal hygiene (adjusted odds ratios [aOR] = 0.11, p = .00) and equipment cleanliness (aOR = 0.19, p = .00) violations. In the models for the control group, none of the odds ratios were statistically different from one, indicating no change in the postintervention time period as compared to the preintervention period.

Overview of the software inspection process

Energy Technology Data Exchange (ETDEWEB)

Lane, G.L.; Dabbs, R. [Sandia National Labs., Albuquerque, NM (United States)

1997-11-01

This tutorial introduces attendees to the Inspection Process and teaches them how to organize and participate in a software inspection. The tutorial advocates the benefits of inspections and encourages attendees to socialize the inspection process in their organizations.

Cytoarchitecture of the human lateral occipital cortex: mapping of two extrastriate areas hOc4la and hOc4lp.

Science.gov (United States)

Malikovic, Aleksandar; Amunts, Katrin; Schleicher, Axel; Mohlberg, Hartmut; Kujovic, Milenko; Palomero-Gallagher, Nicola; Eickhoff, Simon B; Zilles, Karl

2016-05-01

The microstructural correlates of the functional segregation of the human lateral occipital cortex are largely unknown. Therefore, we analyzed the cytoarchitecture of this region in ten human post-mortem brains using an observer-independent and statistically testable parcellation method to define the position and extent of areas in the lateral occipital cortex. Two new cytoarchitectonic areas were found: an anterior area hOc4la and a posterior area hOc4lp. hOc4la was located behind the anterior occipital sulcus in rostral and ventral portions of this region where it occupies the anterior third of the middle and inferior lateral occipital gyri. hOc4lp was found in caudal and dorsal portions of this region where it extends along the superior and middle lateral occipital gyri. The cytoarchitectonic areas were registered to 3D reconstructions of the corresponding brains, which were subsequently spatially normalized to the Montreal Neurological Institute reference space. Continuous probabilistic maps of both areas based on the analysis of ten brains were generated to characterize their inter-subject variability in location and size. The maps of hOc4la and hOc4lp were then used as seeds for meta-analytic connectivity modeling and quantitative functional decoding to identify their co-activation patterns and assignment to functional domains. Convergent evidence from their location, topography, size, functional domains and connectivity indicates that hOc4la and hOc4lp are the potential anatomical correlates of the functionally defined lateral occipital areas LO-1 and LO-2.

Fully Employing Software Inspections Data

Science.gov (United States)

Shull, Forrest; Feldmann, Raimund L.; Seaman, Carolyn; Regardie, Myrna; Godfrey, Sally

2009-01-01

Software inspections provide a proven approach to quality assurance for software products of all kinds, including requirements, design, code, test plans, among others. Common to all inspections is the aim of finding and fixing defects as early as possible, and thereby providing cost savings by minimizing the amount of rework necessary later in the lifecycle. Measurement data, such as the number and type of found defects and the effort spent by the inspection team, provide not only direct feedback about the software product to the project team but are also valuable for process improvement activities. In this paper, we discuss NASA's use of software inspections and the rich set of data that has resulted. In particular, we present results from analysis of inspection data that illustrate the benefits of fully utilizing that data for process improvement at several levels. Examining such data across multiple inspections or projects allows team members to monitor and trigger cross project improvements. Such improvements may focus on the software development processes of the whole organization as well as improvements to the applied inspection process itself.

Piping inspection round robin

International Nuclear Information System (INIS)

Heasler, P.G.; Doctor, S.R.

1996-04-01

The piping inspection round robin was conducted in 1981 at the Pacific Northwest National Laboratory (PNNL) to quantify the capability of ultrasonics for inservice inspection and to address some aspects of reliability for this type of nondestructive evaluation (NDE). The round robin measured the crack detection capabilities of seven field inspection teams who employed procedures that met or exceeded the 1977 edition through the 1978 addenda of the American Society of Mechanical Engineers (ASME) Section 11 Code requirements. Three different types of materials were employed in the study (cast stainless steel, clad ferritic, and wrought stainless steel), and two different types of flaws were implanted into the specimens (intergranular stress corrosion cracks (IGSCCs) and thermal fatigue cracks (TFCs)). When considering near-side inspection, far-side inspection, and false call rate, the overall performance was found to be best in clad ferritic, less effective in wrought stainless steel and the worst in cast stainless steel. Depth sizing performance showed little correlation with the true crack depths

75 FR 13755 - Freeport LNG Development, L.P.; Application To Amend Blanket Authorization To Export Liquefied...

Science.gov (United States)

2010-03-23

... Delaware limited partnership with one general partner, Freeport LNG-GP, Inc., a Delaware corporation, which...). Freeport LNG's limited partners are: (1) Freeport LNG Investments, LLLP, a Delaware limited liability limited partnership, which owns a 45% limited partnership interest in Freeport LNG; (2) Cheniere FLNG, L.P...

Quality assurance for IAEA inspection planning

International Nuclear Information System (INIS)

Markin, J.T.

1986-01-01

Under the provisions of the Treaty on Nonproliferation of Nuclear Weapons and other agreements with states, the International Atomic Energy Agency (IAEA) conducts inspections at nuclear facilities to confirm that their operation is consistent with the peaceful use of nuclear material. The Department of Safeguards at the IAEA is considering a quality assurance program for activities related to the planning of these facility inspections. In this report, we summarize recent work in writing standards for planning inspections at the types of facilities inspected by the IAEA. The standards specify the sequence of steps in planning inspections, which are: (1) administrative functions, such as arrangements for visas and travel, and communications with the state to confirm facility operating schedules and the state's acceptance of the assigned inspectors; (2) technical functions including a specification of the required inspection activities, determination of personnel and equipment resources, and a schedule for implementing the inspection activities at the facility; and (3) management functions, such as pre- and post-inspection briefings, where the planned and implemented inspection activities are reviewed

In-service inspection techniques

International Nuclear Information System (INIS)

Backfisch, W.; Zipser, R.R.

1980-01-01

The owner of a nuclear power plant (NPP) is obligated and interested to maintain - by regular maintenance and in-service inspections - the operational safety and availability of the plant for the subsequent operating period in a condition, as is specified as the basis of the erection and the last operational permits. In-service inspections are performed to verify the operational safety, and maintenance work is performed to guarantee the availability. Below, the typical in-service inspections of a light-water reactor NPP (operated on a pressurized-water reactor or on a boiling-water reactor) are described with details and examples of typical inspections, especially of recurrent performance tests of the systems. (orig./RW)

Detailed simulation of ultrasonic inspections

International Nuclear Information System (INIS)

Chaplin, K.R.; Douglas, S.R.; Dunford, D.

1997-01-01

Simulation of ultrasonic inspection of engineering components have been performed at the Chalk River Laboratories of AECL for over 10 years. The computer model, called EWE for Elastic Wave Equations, solves the Elastic Wave Equations using a novel finite difference scheme. It simulates the propagation of an ultrasonic wave from the transducer to a flaw, the scatter of waves from the flaw, and measurement of signals at a receive transducer. Regions of different materials, water and steel for example, can be simulated. In addition, regions with slightly different material properties from the parent material can be investigated. The two major types of output are displays of the ultrasonic waves inside the component and the corresponding A-scans. EPRI and other organizations have used ultrasonic models for: defining acceptable ultrasonic inspection procedures, designing and evaluating inspection techniques, and for quantifying inspection reliability. The EWE model has been applied to the inspection of large pipes in a nuclear plant, gas pipeline welds and steam generator tubes. Most recent work has dealt with the ultrasonic inspection of pressure tubes in CANDU reactors. Pressure tube inspections can reliably detect and size defects; however, there are improvements that can be made. For example, knowing the sharpness of a flaw-tip is crucial for fitness for service assessments. Computer modelling of the ultrasonic inspection of flaws with different root radius has suggested inspection techniques that provide flaw tip radius information. A preliminary investigation of these methods has been made in the laboratory. The basis for the model will be reviewed at the presentation. Then the results of computer simulations will be displayed on a PC using an interactive program that analyzes simulated A-scans. This software tool gives inspection staff direct access to the results of computer simulations. (author)

Comparison of API 510 pressure vessels inspection planning with API 581 risk-based inspection planning approaches

International Nuclear Information System (INIS)

Shishesaz, Mohammad Reza; Nazarnezhad Bajestani, Mohammad; Hashemi, Seyed Javad; Shekari, Elahe

2013-01-01

To ensure mechanical integrity, all pressure vessels shall be inspected at the intervals provided in inspection codes or based on a risk-based inspection (RBI) assessment. The RBI assessment may allow previously established inspection intervals to be extended. This paper describes the methodology, analysis and results of two RBI studies conducted on 293 pressure vessel components in two crude oil distillation units. Based on API RBI methodology in API 581 (2008), risk target concept was used for determining inspection dates. It was shown that when thinning is the major active damage, the RBI recommended intervals are as long as twice the API 510 intervals. This paper summarizes that, as a fundamental step in the risk calculation, RBI has a more defined methodology for evaluating equipment for multiple damage mechanisms and a more defined approach to specify the use of other inspection technologies beyond the traditional visual, ultrasonic, and radiography tests. -- Highlights: • RBI calculated inspection intervals are as long as twice of API 510 inspection code. • Two case studies verified the advantage of RBI in inspection planning. • RBI is a more reliable methodology when evaluating multiple damage mechanisms. • Damage factor calculations can be used for determining RSFa value in FFS assessments

76 FR 63918 - Tesoro Refining and Marketing Company v. SFPP, L.P.; Notice of Complaint

Science.gov (United States)

2011-10-14

... and Marketing Company v. SFPP, L.P.; Notice of Complaint Take notice that on October 5, 2011, pursuant... section 1(13) of the Interstate Commerce Act (ICA), 49 U.S.C. App. 13(1), Tesoro Refining and Marketing... document is added to a subscribed docket(s). For assistance with any FERC Online service, please e-mail...

OSE inspection of computer security: Review

International Nuclear Information System (INIS)

Jaehne, E.M.

1987-01-01

The inspection process within the Department of Energy (DOE) serves the function of analyzing and reporting on the performance of security measures and controls in specific areas at sites throughout DOE. Three aspects of this process are discussed based on experience in computer security: Policy basis of performance inspections; Role and form of standards and criteria in inspections; and Conducting an inspection using the standards and criteria. Inspections are based on DOE and other applicable policy in each area. These policy statements have a compliance orientation in which the paper trail is often more clearly discernible than the security intention. The relationship of policy to performance inspections is discussed. To facilitate bridging the gap between the paper trail and the security intention defined by policy, standards and criteria were developed in each area. The consensus process and structure of the resulting product for computer security are discussed. Standards and criteria are inspection tools that support the site in preparing for an inspection and the inspector in conducting one. They form a systematic approach that facilitates consistency in the analysis and reporting of inspection results. Experience using the computer security standards and criteria is discussed

The interactive on-site inspection system: An information management system to support arms control inspections

Energy Technology Data Exchange (ETDEWEB)

DeLand, S.M.; Widney, T.W.; Horak, K.E.; Caudell, R.B.; Grose, E.M.

1996-12-01

The increasing use of on-site inspection (OSI) to meet the nation`s obligations with recently signed treaties requires the nation to manage a variety of inspection requirements. This document describes a prototype automated system to assist in the preparation and management of these inspections.

UF{sub 6} cylinder inspections at PGDP

Energy Technology Data Exchange (ETDEWEB)

Lamb, G.W.; Whinnery, W.N. [Martin Marietta Energy Systems, Inc., Paducah, KY (United States)

1991-12-31

Routine inspections of all UF{sub 6} cylinders at the Paducah Gaseous Diffusion Plant have been mandated by the Department of Energy. A specific UF{sub 6} cylinder inspection procedure for what items to inspect and training for the operators prior to inspection duty are described. The layout of the cylinder yards and the forms used in the inspections are shown. The large number of cylinders (>30,000) to inspect and the schedule for completion on the mandated time table are discussed. Results of the inspections and the actions to correct the deficiencies are explained. Future inspections and movement of cylinders for relocation of certain cylinder yards are defined.

10 CFR 21.41 - Inspections.

Science.gov (United States)

2010-01-01

... 10 Energy 1 2010-01-01 2010-01-01 false Inspections. 21.41 Section 21.41 Energy NUCLEAR REGULATORY COMMISSION REPORTING OF DEFECTS AND NONCOMPLIANCE Inspections, Records § 21.41 Inspections. Each individual, corporation, partnership, dedicating entity, or other entity subject to the regulations in this part shall...

Coupled-Flow Simulation of HP-LP Turbines Has Resulted in Significant Fuel Savings

Science.gov (United States)

Veres, Joseph P.

2001-01-01

Our objective was to create a high-fidelity Navier-Stokes computer simulation of the flow through the turbines of a modern high-bypass-ratio turbofan engine. The simulation would have to capture the aerodynamic interactions between closely coupled high- and low-pressure turbines. A computer simulation of the flow in the GE90 turbofan engine's high-pressure (HP) and low-pressure (LP) turbines was created at GE Aircraft Engines under contract with the NASA Glenn Research Center. The three-dimensional steady-state computer simulation was performed using Glenn's average-passage approach named APNASA. The areas upstream and downstream of each blade row mutually interact with each other during engine operation. The embedded blade row operating conditions are modeled since the average passage equations in APNASA actively include the effects of the adjacent blade rows. The turbine airfoils, platforms, and casing are actively cooled by compressor bleed air. Hot gas leaks around the tips of rotors through labyrinth seals. The flow exiting the high work HP turbines is partially transonic and, therefore, has a strong shock system in the transition region. The simulation was done using 121 processors of a Silicon Graphics Origin 2000 (NAS 02K) cluster at the NASA Ames Research Center, with a parallel efficiency of 87 percent in 15 hr. The typical average-passage analysis mesh size per blade row was 280 by 45 by 55, or approx.700,000 grid points. The total number of blade rows was 18 for a combined HP and LP turbine system including the struts in the transition duct and exit guide vane, which contain 12.6 million grid points. Design cycle turnaround time requirements ran typically from 24 to 48 hr of wall clock time. The number of iterations for convergence was 10,000 at 8.03x10(exp -5) sec/iteration/grid point (NAS O2K). Parallel processing by up to 40 processors is required to meet the design cycle time constraints. This is the first-ever flow simulation of an HP and LP

77 FR 52018 - Oxy Midstream Strategic Development, LLC, Magellan Midstream Partners, L.P.; Notice of Petition...

Science.gov (United States)

2012-08-28

... Strategic Development, LLC, Magellan Midstream Partners, L.P.; Notice of Petition for Declaratory Order Take... will transport crude oil from the Permian Basin, which is sourced in West Texas and New Mexico, to the... available for review in the Commission's Public Reference Room in Washington, DC. There is an eSubscription...

Northeast Inspection Services, Inc. boresonic inspection system evaluation

International Nuclear Information System (INIS)

Nottingham, L.D.; Sabourin, P.F.; Presson, J.H.

1993-04-01

Turbine rotor reliability and remaining life assessment are continuing concerns to electric utilities. Over the years, boresonic inspection and evaluation have served as primary components in rotor remaining life assessment. Beginning with an evaluation of TREES by EPRI in 1982, a series of reports that document the detection and sizing capabilities of several boresonic systems have been made available. These studies should provide utilities with a better understanding of system performance and lead to improved reliability when predicting rotor remaining life. In 1990, the procedures followed for evaluating rotor boresonic performance capabilities were changed to transfer a greater portion of the data analysis function to the participating vendor. This change from previous policy was instituted so that the evaluation results would better reflect the ''final answer'' that a vendor would provide in a real rotor inspection and also to reduce the cost of an evaluation. Among the first vendors to participate in the new performance demonstration was Northeast Inspection Services, Inc. (NISI). The tests reported herein were conducted by NISI personnel under the guidelines of the new plan. Details of the new evaluation plan are also presented. Rotor bore blocks containing surface-connected fatigue cracks, embedded glass beads, and embedded radial-axial oriented disks were used in the evaluation. Data were collected during twenty-five independent passes through the blocks. The evaluation consisted of statistical characterization of the detection capabilities, flaw sizing and location accuracy, and repeatability of the inspection system. The results of the evaluation are included in this report

Computerized automated remote inspection system

International Nuclear Information System (INIS)

The automated inspection system utilizes a computer to control the location of the ultrasonic transducer, the actual inspection process, the display of the data, and the storage of the data on IBM magnetic tape. This automated inspection equipment provides two major advantages. First, it provides a cost savings, because of the reduced inspection time, made possible by the automation of the data acquisition, processing, and storage equipment. This reduced inspection time is also made possible by a computerized data evaluation aid which speeds data interpretation. In addition, the computer control of the transducer location drive allows the exact duplication of a previously located position or flaw. The second major advantage is that the use of automated inspection equipment also allows a higher-quality inspection, because of the automated data acquisition, processing, and storage. This storage of data, in accurate digital form on IBM magnetic tape, for example, facilitates retrieval for comparison with previous inspection data. The equipment provides a multiplicity of scan data which will provide statistical information on any questionable volume or flaw. An automatic alarm for location of all reportable flaws reduces the probability of operator error. This system has the ability to present data on a cathode ray tube as numerical information, a three-dimensional picture, or ''hard-copy'' sheet. One important advantage of this system is the ability to store large amounts of data in compact magnetic tape reels

Automated Inspection of Aircraft

Science.gov (United States)

1998-04-01

This report summarizes the development of a robotic system designed to assist aircraft inspectors by remotely deploying non-destructive inspection (NDI) sensors and acquiring, processing, and storing inspection data. Carnegie Mellon University studie...

AECL experience in fuel channel inspection

Energy Technology Data Exchange (ETDEWEB)

Van Drunen, G. [Atomic Energy of Canada Limited, Chalk River, Ontario (Canada); Gunn, R. [Atomic Energy of Canada Limited, Mississauga, Ontario (Canada); Mayo, W.R. [Atomic Energy of Canada Limited, Chalk River, Ontario (Canada); Scott, D.A. [Atomic Energy of Canada Limited, Mississauga, Ontario (Canada)

1999-06-01

Inspection of CANDU fuel channels (FC) is performed to ensure safe and economic reactor operation. CANDU reactor FCs have features that make them a unique non-destructive testing (NDT) challenge. The thin, 4 mm pressure-tube wall means flaws down to about 0.1 mm deep must be reliably detected and characterized. This is one to two orders of magnitude smaller than is usually considered of significant concern for steel piping and pressure vessels. A second unique feature is that inspection sensors must operate in the reactor core--often within 20 cm of highly radioactive fuel. Work on inspection of CANDU reactor FCs at AECL dates back over three decades. In that time, AECL staff have provided equipment and conducted or supervised in-service inspections in about 250 FCs, in addition to over 8000 pre-service FCs. These inspections took place at every existing CANDU reactor except those in India and Romania. Early FC inspections focussed on measurement of changes in dimensions (gauging) resulting from exposure to a combination of neutrons, stress and elevated temperature. Expansion of inspection activities to include volumetric inspection (for flaws) started in the mid-1970s with the discovery of delayed hydride cracking in Pickering 3 and 4 rolled joints. Recognition of other types of flaw mechanisms in the 1980s led to further expansion in both pre-service and in-service inspections. These growing requirements, to meet regulatory as well as economic needs, led to the development of a wide spectrum of inspection technology that now includes tests for hydrogen concentration, structural integrity of core components, flaws, and dimensional change. This paper reviews current CANDU reactor FC inspection requirements. The equipment and techniques developed to satisfy these requirements are also described. The paper concludes with a discussion of work in progress in AECL aimed at providing state-of-the-art FC inspection services. (author)

Operational inspections

International Nuclear Information System (INIS)

Bystersky, M.

1997-01-01

Special equipment is described, designed for inspection of reactor pressure vessels performed from the inside. Central shaft manipulator ZMM-5 is available for crack detection control using ultrasound and eddy currents, for visual check of surfaces, repair works at the reactor pressure vessel, and hardness measurements. The manipulator consists of the manipulator bridge, a cable container, shaft segments, a control mechanism and auxiliary parts. Eight inspections were performed at the Bohunice nuclear power plant and two at the Paks nuclear power plant. (M.D.)

Experience on inspection at PFPF

International Nuclear Information System (INIS)

Aoki, I.; Yamamoto, Y.; Takahashi, Saburo; Ooshima, Hirofumi; Kuniyasu, Kazufusa.

1993-01-01

In order to reduce a personal radiation exposure, Plutonium Fuel Production Facility (PFPF) introduced an automated MOX fabrication technology. Safeguards system for the PFPF was designed and installed so as to be compatible with automated process operation as much as possible. Introduction of these system in PFPF made possible to do the inspection measurements with unattended mode and Near Real Time Material Accountancy (NRTA), consequently inspection has been carrying out effectively and efficiently. This paper describes the new Inspection activities as a comparison with old Inspection activities based on our experience. (author)

7 CFR 927.60 - Inspection and certification.

Science.gov (United States)

2010-01-01

... WASHINGTON Order Regulating Handling Inspection § 927.60 Inspection and certification. (a) Handlers shall ship only fresh pears inspected by the Federal-State Inspection Service or under a program developed by... 7 Agriculture 8 2010-01-01 2010-01-01 false Inspection and certification. 927.60 Section 927.60...

RPII Inspection and Licensing Activities and Annual Inspection Programme for 2014

International Nuclear Information System (INIS)

Fennell, S.

2014-04-01

The purpose of this document is to promote transparency in the activities of the Radiological Protection Institute of Ireland discussed herein. It explains aspects of the internal workings of the Regulation and Information Management Division of the RPII to aid understanding of the processes and decisions of that Division which may impact on licensees and other interested parties. Every effort has been made to ensure the accuracy and completeness of information contained herein, but the RPII does not warrant such accuracy or completeness and lists of procedures and criteria may not be exhaustive. The reader should also bear in mind that the actual inspection programme and related procedures or criteria may be altered or revised in the course of the year in response to new developments. This is a guidance and information document and, while the RPII is available to advise and assist generally with regulatory queries, the information so provided or contained in this document is of a general nature and is not intended to address the specific circumstances of any particular party. This document is not intended as a legal interpretation of the legislation that applies to the RPII or of the obligations of parties operating in spheres covered by that legislation. Parties wishing to be advised on such matters should consult their legal advisers

ROBOTIC TANK INSPECTION END EFFECTOR

International Nuclear Information System (INIS)

Rachel Landry

1999-01-01

The objective of this contract between Oceaneering Space Systems (OSS) and the Department of Energy (DOE) was to provide a tool for the DOE to inspect the inside tank walls of underground radioactive waste storage tanks in their tank farms. Some of these tanks are suspected to have leaks, but the harsh nature of the environment within the tanks precludes human inspection of tank walls. As a result of these conditions only a few inspection methods can fulfill this task. Of the methods available, OSS chose to pursue Alternating Current Field Measurement (ACFM), because it does not require clean surfaces for inspection, nor any contact with the Surface being inspected, and introduces no extra by-products in the inspection process (no coupling fluids or residues are left behind). The tool produced by OSS is the Robotic Tank Inspection End Effector (RTIEE), which is initially deployed on the tip of the Light Duty Utility Arm (LDUA). The RTEE combines ACFM with a color video camera for both electromagnetic and visual inspection The complete package consists of an end effector, its corresponding electronics and software, and a user's manual to guide the operator through an inspection. The system has both coarse and fine inspection modes and allows the user to catalog defects and suspected areas of leakage in a database for further examination, which may lead to emptying the tank for repair, decommissioning, etc.. The following is an updated report to OSS document OSS-21100-7002, which was submitted in 1995. During the course of the contract, two related sub-tasks arose, the Wall and Coating Thickness Sensor and the Vacuum Scarifying and Sampling Tool Assembly. The first of these sub-tasks was intended to evaluate the corrosion and wall thinning of 55-gallon steel drums. The second was retrieved and characterized the waste material trapped inside the annulus region of the underground tanks on the DOE's tank farms. While these sub-tasks were derived from the original intent

Nuclear reactor vessel surface inspecting technique applying electric resistance probe

International Nuclear Information System (INIS)

Yamaguchi, T.; Enami, K.; Yoshioka, M.

1975-01-01

A new technique for inspecting the inner surface of the PWR type nuclear reactor vessel by use of an electric resistance probe is introduced, centering on a data processing system. This system is composed of a mini-computer, a system typewriter, an interface unit, a D-A converter and controller, and X-Y recorder and others. Its functions are judging flaws and making flaw detection maps. In order to judge flaws by flaw detection signals, three kinds of flaw judging methods have been developed. In case there is a flaw, its position and depth are calculated and listed on the system typewriter. The flaw detection maps are expressed in four kinds of modes and they are displayed on the X-Y recorder. (auth.)

Nonlinear optics in the LP(02) higher-order mode of a fiber.

Science.gov (United States)

Chen, Y; Chen, Z; Wadsworth, W J; Birks, T A

2013-07-29

The distinct disperion properties of higher-order modes in optical fibers permit the nonlinear generation of radiation deeper into the ultraviolet than is possible with the fundamental mode. This is exploited using adiabatic, broadband mode convertors to couple light efficiently from an input fundamental mode and also to return the generated light to an output fundamental mode over a broad spectral range. For example, we generate visible and UV supercontinuum light in the LP(02) mode of a photonic crystal fiber from sub-ns pulses with a wavelength of 532 nm.

International cooperation in production inspections

International Nuclear Information System (INIS)

Limousin, S.

2009-01-01

Nuclear pressure equipment, like the reactor pressure vessel or steam generators, are manufactured in many countries all around the world. As only few reactors were built in the 90's, most of the nuclear safety authorities have lost part of their know how in component manufacturing oversight. For these two reasons, vendor inspection is a key area for international cooperation. On the one hand, ASN has bilateral relationships with several countries (USA, Finland, China...) to fulfill specific purposes. On the other hand, ASN participates in international groups like the MDEP ( Multinational Design Evaluation Program). A MDEP working group dedicated to vendor inspection cooperation enables exchanges of informations (inspection program plan, inspection findings...) among the regulators. Join inspections are organized. International cooperation could lead in the long term to an harmonization of regulatory practices. (author)

How to share inspection practices internationally?

International Nuclear Information System (INIS)

Zerger, B.

2009-01-01

ASN strives to share practices with its foreign counterparts in order to develop and adopt best practice worldwide. With regard to inspection practices, the exchanges are made with AEN, in particular within the context of the Working Group on Inspection Practices (WGIP). As well as being very rewarding, the exchanges sometimes come up against marked differences in terms of inspection organisation and even in the meaning given to the inspections. The WGIP endeavors, however, to make inspection practice recommendations that are as functional and feasible as possible. (author)

Towards formalization of inspection using petrinets

International Nuclear Information System (INIS)

Javed, M.; Naeem, M.; Bahadur, F.; Wahab, A.

2014-01-01

Achieving better quality software has always been a challenge for software developers. Inspection is one of the most efficient techniques, which ensure the quality of software during its development. To the best of our knowledge, current inspection techniques are not realized by any formal approach. In this paper, we propose an inspection technique, which is not only backed by the formal mathematical semantics of Petri nets, but also supports inspecting concurrent processes. We also use a case study of an agent based distributed processing system to demonstrate the inspection of concurrent processes. (author)

Ultrasonic inspection of inpile tubes

International Nuclear Information System (INIS)

Boyd, D.M.; Bossi, H.

1985-01-01

The in-service inspection (ISI) of inpile tubes can be performed accurately and safely with a semiautomatic ultrasonic inspection system. The ultrasonic technique uses a set of multiple transducers to detect and size cracks, voids, and laminations radially and circumferentially. Welds are also inspected for defects. The system is designed to inspect stainless steel and Inconel tubes ranging from 53.8 mm (2.12 in.) to 101.6 mm (4 in.) inner diameter with wall thickness on the order of 5 mm. The inspection head contains seven transducers mounted in a surface-following device. Six angle-beam transducers generate shear waves in the tubes. Two of the six are oriented to detect circumferential cracks, and two detect axial cracks. Although each of these four transducers is used in the pulse-echo mode, they are oriented in aligned sets so pitch-catch operation is possible if desired. The remaining angle-beam transducers are angulated to detect flaws that are off axial or circumferential orientation. The seventh transducer is used for longitudinal inspection and detects and sizes laminar-type defects

Usability inspection to improve an electronic provincial medication repository.

Science.gov (United States)

Kitson, Nicole A; Price, Morgan; Bowen, Michael; Lau, Francis

2013-01-01

Medication errors are a significant source of actual and potential harm for patients. Community medication records have the potential to reduce medication errors, but they can also introduce unintended consequences when there is low fit to task (low cognitive fit). PharmaNet is a provincially managed electronic repository that contains the records for community-based pharmacy-dispensed medications in British Columbia. This research explores the usability of PharmaNet, as a representative community-based medication repository. We completed usability inspections of PharmaNet through vendor applications. Vendor participants were asked to complete activity-driven scenarios, which highlighted aspects of medication management workflow. Screen recording was later reviewed. Heuristics were applied to explore usability issues and improvement opportunities. Usability inspection was conducted with four PharmaNet applications. Ninety-six usability issues were identified; half of these had potential implications for patient safety. These were primarily related to login and logout procedures; display of patient name; display of medications; update and display of alert information; and the changing or discontinuation of medications. PharmaNet was designed primarily to support medication dispensing and billing activities by community pharmacies, but is also used to support care providers with monitoring and prescribing activities. As such, some of the features do not have a strong fit for other clinical activities. To improve fit, we recommend: having a Current Medications List and Displaying Medication Utilization Charts.

System Enhancements for Mechanical Inspection Processes

Science.gov (United States)

Hawkins, Myers IV

2011-01-01

Quality inspection of parts is a major component to any project that requires hardware implementation. Keeping track of all of the inspection jobs is essential to having a smooth running process. By using HTML, the programming language ColdFusion, and the MySQL database, I created a web-based job management system for the 170 Mechanical Inspection Group that will replace the Microsoft Access based management system. This will improve the ways inspectors and the people awaiting inspection view and keep track of hardware as it is in the inspection process. In the end, the management system should be able to insert jobs into a queue, place jobs in and out of a bonded state, pre-release bonded jobs, and close out inspection jobs.

Stakeholder participation for the legacy ponds and legacy silos (LP and LS) facility at Sellafield, Cumbria. UK: the nature and effectiveness of the dialogue - 16030

International Nuclear Information System (INIS)

Whitton, John

2009-01-01

The Legacy Ponds and Silos (LP and S) facilities are part of the UK nuclear legacy located at the Sellafield Site, Cumbria. There are four individual facilities containing nuclear wastes that have accumulated over a period of approximately 50 years. Waste retrieval and conditioning, in preparation for decommissioning, is currently being carried out by the site operator. LP and S have recently proposed a re-engagement with stakeholders following the initial engagement in December 2005. This paper reviews this earlier engagement in terms of the nature of dialogue that was carried out when compared against definitions of deliberation provided in the literature. The aim of this paper is to provide those planning future engagement with a better understanding of how the nature of dialogue can vary and uses participation and deliberation as indicators of effective engagement. A concern of those working towards a programme of effective stakeholder participation in 2005 was how to ensure genuine dialogue and stakeholder representation in such a strictly controlled and regulated environment with a technical complexity that challenges technical specialist and lay person alike. LP and S recognised that effective dialogue with stakeholders on the available technical options and their associated societal impacts would form a significant part of this process if options were to prove resilient. However, the challenge presented to LP and S was how to engage stakeholders on a variety of projects, whilst ensuring the output could be used by the projects as part of their technical decision making. Initial contact was made with stakeholders in December 2005, as part of a 'Baseline' Best Practicable Environmental Option (BPEO) study. A BPEO study leads to decisions on waste management based on an integrated assessment of alternative options, on the basis of factors such as the occupational and environmental risks, the environmental impacts, costs and social implications of the options

Optimising import phytosanitary inspection

NARCIS (Netherlands)

Surkov, I.

2007-01-01

Keywords: quarantine pest, plant health policy, optimization, import phytosanitary inspection, ‘reduced checks’, optimal allocation of resources, multinomial logistic regression, the Netherlands World trade is a major vector of spread of quarantine plant pests. Border phytosanitary inspection

Magnetic particle inspection

Science.gov (United States)

Sastri, Sankar

1990-01-01

The purpose of this experiment is to familiarize the student with magnetic particle inspection and relate it to classification of various defects. Magnetic particle inspection is a method of detecting the presence of cracks, laps, tears, inclusions, and similar discontinuities in ferromagnetic materials such as iron and steel. This method will most clearly show defects that are perpendicular to the magnetic field. The Magnaglo method uses a liquid which is sprayed on the workpiece to be inspected, and the part is magnetized at the same time. The workpiece is then viewed under a black light, and the presence of discontinuity is shown by the formation of a bright indication formed by the magnetic particles over the discontinuity. The equipment and experimental procedures are described.

Ultrasonic inspections of fuel alignment pins

International Nuclear Information System (INIS)

Rathgeb, W.; Schmid, R.

1994-01-01

As a remedy to the practical problem of defects in fuel alignment pins made of Inconel X750, an inspection technique has been developed which fully meets the requirements of detecting defects. The newly used fuel alignment pins made of austenite are easy to test and therefore satisfy the necessity of further inspections.For the fuel alignment pins of the upper core structure a safe and fast inspection technique was made available. The inspection sensitivity is high and it is possible to give quantitative directions concerning defect orientation and depth. After the required inspections had been concluded in 1989, a total of 18 inspections were carried out in various national and international nuclear power plants in the following years. During this time more than 6000 fuel alignment pines were examined.For the fuel alignment pins the inspection technique provided could increase the understanding of the defect process. This technique contributed to the development of an adaptive and economical repair strategy. ((orig.))

PWR vessel inspection performance improvements

International Nuclear Information System (INIS)

Blair Fairbrother, D.; Bodson, Francis

1998-01-01

A compact robot for ultrasonic inspection of reactor vessels has been developed that reduces setup logistics and schedule time for mandatory code inspections. Rather than installing a large structure to access the entire weld inspection area from its flange attachment, the compact robot examines welds in overlapping patches from a suction cup anchor to the shell wall. The compact robot size allows two robots to be operated in the vessel simultaneously. This significantly reduces the time required to complete the inspection. Experience to date indicates that time for vessel examinations can be reduced to fewer than four days. (author)

Employing innovative techniques to reduce inspection times

International Nuclear Information System (INIS)

Heumueller, R.; Guse, G.; Dirauf, F.; Fischer, E.

1997-01-01

Shorter inspection periods mean lower revision costs and less tight revision schedules, but must not detract from the quality of inspection findings. This requirement imposes upon the company performing the inspection the need for top achievements both in quality management and in the use of innovative techniques. Flexible equipment systems and inspection techniques adapted to specific purposes are able to reduce inspection times in many inspection jobs. As part of a complete system designed to reduce inspection times, the new Saphir (Siemens Alok Phased Array Integrated Reliable UT-System) inspection equipment system is the core of most of the recent innovations. Being an integrated inspection equipment system, it is able to handle conventional US probes as well as arrays and phased arrays. It is open for further matching to specific inspection and administrative requirements and developments, and it may be incorporated in the network of an integrated system with a database. A technological leap in probe design in the past few years has allowed controllable wave fields to be generated which are in no way inferior to those of conventional probes with fixed angles of incidence. In this way, a number of inspection techniques can be implemented with a single probe. This reduces inspection times, setup and retooling times, and doses. Typical examples already used in practice are the LLT (longitudinal-longitudinal-transverse waves) technique and the integration of inspections for longitudinal and transverse defects in a single run. In the near future, surfaces with complicated curvatures will be inspected by novel modular robot systems consisting of individual modules of linear axes and rotational axes. (orig.) [de

Automated PCB Inspection System

Directory of Open Access Journals (Sweden)

Syed Usama BUKHARI

2017-05-01

Full Text Available Development of an automated PCB inspection system as per the need of industry is a challenging task. In this paper a case study is presented, to exhibit, a proposed system for an immigration process of a manual PCB inspection system to an automated PCB inspection system, with a minimal intervention on the existing production flow, for a leading automotive manufacturing company. A detailed design of the system, based on computer vision followed by testing and analysis was proposed, in order to aid the manufacturer in the process of automation.

78 FR 77770 - Aldine Capital Fund II, L.P.; Notice Seeking Exemption Under Section 312 of the Small Business...

Science.gov (United States)

2013-12-24

... financing to Koontz-Wagner Maintenance Services, LLC., 3801 Voorde Drive, South Bend, IN 46628. The....P. is an Associate of Aldine Capital Fund II, L.P. and owns more than ten percent of Koontz- Wagner...

Nuclear Technology. Course 30: Mechanical Inspection. Module 30-6, Protective Coating Inspection.

Science.gov (United States)

Espy, John

This sixth in a series of eight modules for a course titled Mechanical Inspection describes the duties of the nuclear quality assurance/quality control technician that are associated with protective coatings, and the national standards that govern the selection, application, and inspection of protective coatings for the reactor containment…

Evaluating Heuristics for Planning Effective and Efficient Inspections

Science.gov (United States)

Shull, Forrest J.; Seaman, Carolyn B.; Diep, Madeline M.; Feldmann, Raimund L.; Godfrey, Sara H.; Regardie, Myrna

2010-01-01

A significant body of knowledge concerning software inspection practice indicates that the value of inspections varies widely both within and across organizations. Inspection effectiveness and efficiency can be measured in numerous ways, and may be affected by a variety of factors such as Inspection planning, the type of software, the developing organization, and many others. In the early 1990's, NASA formulated heuristics for inspection planning based on best practices and early NASA inspection data. Over the intervening years, the body of data from NASA inspections has grown. This paper describes a multi-faceted exploratory analysis performed on this · data to elicit lessons learned in general about conducting inspections and to recommend improvements to the existing heuristics. The contributions of our results include support for modifying some of the original inspection heuristics (e.g. Increasing the recommended page rate), evidence that Inspection planners must choose between efficiency and effectiveness, as a good tradeoff between them may not exist, and Identification of small subsets of inspections for which new inspection heuristics are needed. Most Importantly, this work illustrates the value of collecting rich data on software Inspections, and using it to gain insight into, and Improve, inspection practice.

'LDL-C' = LDL-C + Lp(a)-C: implications of achieved ultra-low LDL-C levels in the proprotein convertase subtilisin/kexin type 9 era of potent LDL-C lowering.

Science.gov (United States)

Yeang, Calvin; Witztum, Joseph L; Tsimikas, Sotirios

2015-06-01

The measurement that is termed 'LDL-cholesterol' (LDL-C) includes the cholesterol content of lipoprotein(a) [Lp(a)-C], which can contribute approximately 30-45% to measured LDL-C levels as a percentage of its mass. We review the implications of achieved very low LDL-C levels in patients treated with potent LDL-C-lowering agents in the context of varying Lp(a) levels. Combination therapy with statins, ezetimibe, and proprotein convertase subtilisin/kexin type 9 (PCSK9) inhibitors can lower LDL-C to unprecedentedly low levels. Recent PCSK9 trials have shown that routine achievement of mean LDL-C less than 50 mg/dl is feasible, along with the modest reductions in Lp(a). Many patients will achieve LDL-C less than 25 mg/dl with concomitantly elevated Lp(a) levels that contribute substantially to the measured 'LDL-C'. Therefore, it is possible that some of these patients may have little to no circulating LDL-C. As the new era of ultralow LDL-C levels ensues, it is imperative to understand the contribution of Lp(a)-C to measured LDL-C and the consequences of achieving ultralow or potentially absent LDL-C in the setting of elevated Lp(a) levels and possibly free apo(a). We review this concept and suggest avenues of research, including analyses of existing datasets in current clinical trials and new research studies, to understand its pathophysiological and clinical significance.

Assessment of core damage models in SCDAP/RELAP5 during OECD LOFT LP-FP-2

International Nuclear Information System (INIS)

Coryell, E.W.

1991-01-01

The US Nuclear Regulatory Commission has sponsored a program to apply the SCDAP/RELAP5 code to analysis of the transient and reflood phases of the OECD LOFT LP-FP-2 Experiment. The principal objectives of the LP-FP-2 experiment were to determine the fission product release from the fuel during the early phases of a severe fuel damage scenario and to examine the phenomena controlling fission product transport in a vapor/aerosol environment. Calculations with the SCDAP/RELAP5 code, developed at the INEL with NRC support, have been performed to (1) examine the phenomena controlling the progression of both transient and reflood phases of the experiment, (2) enhance our understanding of the phenomena occurring during reflood and add credence to the postulated phenomenological sequence, (3) assess the ability of SCDAP/RELAP5 to examine severe fuel damage issues and phenomena, and (4) identify code strengths and deficiencies with the intent of prioritizing code improvements. Results indicate that the code is able to analyze the early phases of severe fuel damage reasonably well, with potential deficiencies in modelling interaction between molten control rod material and intact fuel

75 FR 39244 - Arizona Public Service Company, Sequent Energy Management, L.P.; Notice of Joint Petition for...

Science.gov (United States)

2010-07-08

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. PR10-45-000] Arizona Public Service Company, Sequent Energy Management, L.P.; Notice of Joint Petition for Clarification, or in the Alternative, Request for Limited Waiver June 30, 2010. Take notice that on June 25, 2010, Arizona Public...

76 FR 59682 - Erie Boulevard Hydropower L.P.; Notice of Dispute Resolution Panel Meeting and Technical Conference

Science.gov (United States)

2011-09-27

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Project No. 7518-012] Erie Boulevard Hydropower L.P.; Notice of Dispute Resolution Panel Meeting and Technical Conference On September 16, 2011, Commission staff, in response to the filing of notice of study dispute by the New York State Department of...

INSPECT: a package of computer programs for planning and evaluating safeguards inspections

International Nuclear Information System (INIS)

Mullen, M.F.

1980-01-01

As part of the US Program of Technical Assistance to IAEA Safeguards, PNL has developed a package of computer programs, called INSPECT, that can be used in planning and evaluating safeguards inspections of various types of nuclear facilities. The programs are based on the statistical methods described in Part F of the IAEA Safeguards Technical Manual and can be used to calculate the variance components of the MUF (Material Unaccounted For) statistic, the variance components of the D (difference) statistic, attribute and variables sampling plans, and a measure of the effectiveness of the inspection plan. The paper describes the programs, reviews a number of applications, and indicates areas for future work

Reliability-Based Inspection Planning for Structural Systems

DEFF Research Database (Denmark)

Sørensen, John Dalsgaard

1993-01-01

A general model for reliability-based optimal inspection and repair strategies for structural systems is described. The total expected costs in the design lifetime is minimized with the number of inspections, the inspection times and efforts as decision variables. The equivalence of this model...... with a preposterior analysis from statistical decision theory is discussed. It is described how information obtained by an inspection can be used in a repair decision. Stochastic models for inspection, measurement and repair actions are presented. The general model is applied for inspection and repair planning...

New Swedish regulations in the area of plant inspection and in-service inspection

International Nuclear Information System (INIS)

Hansson, B.

1998-01-01

History and present status od Swedish regulations in the field of NPP inspection and in-service inspection are described. The presentation focuses on the development of regulations and establishing new ones. A description of different organisations involved is included

9 CFR 381.67 - Young chicken and squab slaughter inspection rate maximums under traditional inspection procedure.

Science.gov (United States)

2010-01-01

... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Young chicken and squab slaughter... INSPECTION REGULATIONS Operating Procedures § 381.67 Young chicken and squab slaughter inspection rate... inspector per minute under the traditional inspection procedure for the different young chicken and squab...

7 CFR 57.925 - Inspection of imported eggs.

Science.gov (United States)

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Inspection of imported eggs. 57.925 Section 57.925... AGRICULTURAL MARKETING ACT OF 1946 AND THE EGG PRODUCTS INSPECTION ACT (CONTINUED) INSPECTION OF EGGS (EGG PRODUCTS INSPECTION ACT) Regulations Governing the Inspection of Eggs Imports § 57.925 Inspection of...

46 CFR 107.211 - Original Certificate of Inspection.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Original Certificate of Inspection. 107.211 Section 107... INSPECTION AND CERTIFICATION Inspection and Certification § 107.211 Original Certificate of Inspection. (a) The owner or builder of a unit applies for an inspection for an original Certificate of Inspection by...

9 CFR 381.309 - Finished product inspection.

Science.gov (United States)

2010-01-01

... Section 381.309 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY INSPECTION AND CERTIFICATION POULTRY PRODUCTS INSPECTION REGULATIONS Canning and Canned Products § 381.309...

Inspection system performance test procedure

International Nuclear Information System (INIS)

Jensen, C.E.

1995-01-01

This procedure establishes requirements to administer a performance demonstration test. The test is to demonstrate that the double-shell tank inspection system (DSTIS) supplied by the contractor performs in accordance with the WHC-S-4108, Double-Shell Tank Ultrasonic Inspection Performance Specification, Rev. 2-A, January, 1995. The inspection system is intended to provide ultrasonic (UT) and visual data to determine integrity of the Westinghouse Hanford Company (WHC) site underground waste tanks. The robotic inspection system consists of the following major sub-systems (modules) and components: Mobile control center; Deployment module; Cable management assembly; Robot mechanism; Ultrasonic testing system; Visual testing system; Pneumatic system; Electrical system; and Control system

Robotic inspection technology-process an toolbox

Energy Technology Data Exchange (ETDEWEB)

Hermes, Markus [ROSEN Group (United States). R and D Dept.

2005-07-01

Pipeline deterioration grows progressively with ultimate aging of pipeline systems (on-plot and cross country). This includes both, very localized corrosion as well as increasing failure probability due to fatigue cracking. Limiting regular inspecting activities to the 'scrapable' part of the pipelines only, will ultimately result into a pipeline system with questionable integrity. The confidence level in the integrity of these systems will drop below acceptance levels. Inspection of presently un-inspectable sections of the pipeline system becomes a must. This paper provides information on ROSEN's progress on the 'robotic inspection technology' project. The robotic inspection concept developed by ROSEN is based on a modular toolbox principle. This is mandatory. A universal 'all purpose' robot would not be reliable and efficient in resolving the postulated inspection task. A preparatory Quality Function Deployment (QFD) analysis is performed prior to the decision about the adequate robotic solution. This enhances the serviceability and efficiency of the provided technology. The word 'robotic' can be understood in its full meaning of Recognition - Strategy - Motion - Control. Cooperation of different individual systems with an established communication, e.g. utilizing Bluetooth technology, support the robustness of the ROSEN robotic inspection approach. Beside the navigation strategy, the inspection strategy is also part of the QFD process. Multiple inspection technologies combined on a single carrier or distributed across interacting container must be selected with a clear vision of the particular goal. (author)

Inspections - a cost effective approach

International Nuclear Information System (INIS)

Joseph, C.

1981-01-01

This paper describes a cost effective approach for inspections of Computerized Nuclear Materials Control and Accounting Systems (CNMCAS). Highlighted is the capability to conduct an inspection program via portable telephone terminals from off-site locations. The program can be applied to various materials management functions including materials control, quality assurance, and materials accounting. The system is designed to facilitate inspections by both external and internal groups

Can non-destructive inspection be reliable

International Nuclear Information System (INIS)

Silk, M.G.; Stoneham, A.M.; Temple, J.A.G.

1988-01-01

The paper on inspection is based on the book ''The reliability of non-destructive inspection: assessing the assessment of structures under stress'' by the present authors (published by Adam Hilger 1987). Emphasis is placed on the reliability of inspection and whether cracks in welds or flaws in components can be detected. The need for non-destructive testing and the historical attitudes to non-destructive testing are outlined, along with the case of failure. Factors influencing reliable inspection are discussed, and defect detection trials involving round robin tests are described. The development of reliable inspection techniques and the costs of reliability and unreliability are also examined. (U.K.)

Development of radioactive materials inspection system

International Nuclear Information System (INIS)

Yang Lu; Wang Guobao; Chen Yuhua; Li Latu; Zhang Sujing

2005-01-01

Radioactive materials inspection system which is applied to inspect the horror activities of radioactive materials and its illegal transfer. The detector sections are made of highly stable and credible material. It has high sensitivity to radioactive materials. The inspect lowest limit of inspection is the 2-3 times to the background, the energy range is 30 keV-2.5 MeV and the response time is 0.5 s. Inspection message can be transmitted through wired or wireless web to implement remote control. The structure of the system is small, light and convenient. It is ideal for protecting society and public from the harm of the radiation. (authors)

Lean Construction Applications for Bridge Inspection

Science.gov (United States)

2017-10-01

Lean philosophy was used to analyze the efficiency of bridge inspection. Emphasis was put on identifying activities that add value to the final output, an owner approved bridge inspection report. 26 bridge inspections were shadowed. Time spent on bri...

9 CFR 318.309 - Finished product inspection.

Science.gov (United States)

2010-01-01

... Section 318.309 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE AGENCY ORGANIZATION AND TERMINOLOGY; MANDATORY MEAT AND POULTRY PRODUCTS INSPECTION AND VOLUNTARY... Canning and Canned Products § 318.309 Finished product inspection. (a) Finished product inspections must...

Development of inspection robots for bridge cables.

Science.gov (United States)

Yun, Hae-Bum; Kim, Se-Hoon; Wu, Liuliu; Lee, Jong-Jae

2013-01-01

This paper presents the bridge cable inspection robot developed in Korea. Two types of the cable inspection robots were developed for cable-suspension bridges and cable-stayed bridge. The design of the robot system and performance of the NDT techniques associated with the cable inspection robot are discussed. A review on recent advances in emerging robot-based inspection technologies for bridge cables and current bridge cable inspection methods is also presented.

Runway Inspection by RPAS

Directory of Open Access Journals (Sweden)

Stanislav Absolon

2015-10-01

Full Text Available This article discusses the use of the RPAS for the inspection of the airport operating areas. The paper compares the current process of the inspection of the airport operating areas by the airport staff with the possibilities which are offered by the use of the modern technology RPAS. The following text also describes how to inspect airport operating areas by the RPAS, specific technical possibilities and the applicable technical solutions. Furthermore there are variants of piloting the RPAS, comparing usable equipment, equipment for video recording and the possibility of using thermal imaging camera in the article.

Non-destructive inservice inspections

International Nuclear Information System (INIS)

Kauppinen, P.; Sarkimo, M.; Lahdenperae, K.

1998-01-01

In order to assess the possible damages occurring in the components and structures of operating nuclear power plants during service the main components and structures are periodically inspected by non-destructive testing techniques. The reliability of non-destructive testing techniques applied in these inservice inspections is of major importance because the decisions concerning the needs for repair of components are mainly based on the results of inspections. One of the targets of this research program has been to improve the reliability of non-destructive testing. This has been addressed in the sub-projects which are briefly summarised here. (author)

9 CFR 355.7 - Inauguration of inspection.

Science.gov (United States)

2010-01-01

... INSPECTION AND CERTIFICATION CERTIFIED PRODUCTS FOR DOGS, CATS, AND OTHER CARNIVORA; INSPECTION... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Inauguration of inspection. 355.7 Section 355.7 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE, DEPARTMENT OF AGRICULTURE...

78 FR 54886 - Texas Eastern Transmission, LP; Notice of Intent To Prepare an Environmental Assessment for the...

Science.gov (United States)

2013-09-06

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. PF13-15-000] Texas Eastern Transmission, LP; Notice of Intent To Prepare an Environmental Assessment for the Planned Ohio Pipeline Energy Network Project, Request for Comments on Environmental Issues, and Notice of Public Scoping Meetings The staff of the Federal Energy...

Developing the information management system for safeguards national inspection

International Nuclear Information System (INIS)

Park, S. J.; Jeon, I.; Park, W. S.; Min, K. S.

2003-01-01

The inspection information management system for safeguards national inspection is aimed to do the national safeguards inspection with efficiency, and to decrease the inspector's load to write inspection report by systematizing the inspection jobs and sharing the inspection data. National safeguards inspection is consisted two large jobs. The first is the national safeguards supporting job of managing to support the national inspection mission. The other is the writing a national inspection report after completing the national inspection. Before the developing of inspection information management system, the official tools(spread sheet, word processor) are usually used. But there is problem to share the data, to produce the statistics data. To solve the these problem, we developed the inspection information management system that process the job from initial to final inspection work, and opened user education. This paper explain the procedure of developing the inspection information management system for safeguards national inspection

In-service inspection of pressurized water reactors

International Nuclear Information System (INIS)

Rapin, M.; Saglio, R.

1983-01-01

French legislation, which is more demanding than in other countries, had led Electricite de France, the State-owned utility, to acquire better performance in-service inspection facilities than those which existed previously. This fact has spurred the industrial development of the new technical facilities which are used worldwide today. This article presents the ''in-service inspection machine'' (MIS) for the inspection of the welds of a PWR vessel, and the inspection device of steam generator tubes; the MIS allow a remote-viewing, ultrasonic and gamma-graphic inspection; Foucault currents are the only one method adapted to the inspection steam generator tubes [fr

Listings.

Science.gov (United States)

1994-12-07

Nursing Standard regrets that it is no longer able to take listings over the telephone because of unprecedented demand. Readers are reminded that the listings section is for the use of charitable and professional organisations, unions and health authorities to publicise forthcoming events. Listings should contain all relevant details and be posted or faxed to Susan Blood-worth, Nursing Standard, Viking House, 17-19 Peterborough Road, Harrotc. Middlesex HA 1 2AX. Fax: 081-423 3867.

A locomotive inspection robot for turbine building interior inspection in nuclear power plants

International Nuclear Information System (INIS)

Obama, M.; Ozaki, F.; Asano, K.

1985-01-01

A locomotive inspection robot, named Turbine Building Inspection System (TBIS), has been developed for turbine building interior inspections in nuclear power plants. This robot is made up of a vehicle, a telescopic support, turning head and a multijoint arm which has dual TV cameras and a diagnostic rod on its tip. The multijoint arm has 17 degrees of freedom and its length is 243 cm. Minimum and maximum heights for the multijoint arm shoulder are 1.5 meter and 4 meters respectively. The total degree of freedom in the combination of the multijoint arm, turning head and telescopic support is 19 and the area, it is capable of inspecting, is equal to the cylindrical dome whose height and diameter are 6.4 meters and 4.8 meters respectively. The design philosophy, hardware structure and operation method of the TBIS are described. 2 refs.; 10 figs

Wafer plane inspection for advanced reticle defects

Science.gov (United States)

Nagpal, Rajesh; Ghadiali, Firoz; Kim, Jun; Huang, Tracy; Pang, Song

2008-05-01

Readiness of new mask defect inspection technology is one of the key enablers for insertion & transition of the next generation technology from development into production. High volume production in mask shops and wafer fabs demands a reticle inspection system with superior sensitivity complemented by a low false defect rate to ensure fast turnaround of reticle repair and defect disposition (W. Chou et al 2007). Wafer Plane Inspection (WPI) is a novel approach to mask defect inspection, complementing the high resolution inspection capabilities of the TeraScanHR defect inspection system. WPI is accomplished by using the high resolution mask images to construct a physical mask model (D. Pettibone et al 1999). This mask model is then used to create the mask image in the wafer aerial plane. A threshold model is applied to enhance the inspectability of printing defects. WPI can eliminate the mask restrictions imposed on OPC solutions by inspection tool limitations in the past. Historically, minimum image restrictions were required to avoid nuisance inspection stops and/or subsequent loss of sensitivity to defects. WPI has the potential to eliminate these limitations by moving the mask defect inspections to the wafer plane. This paper outlines Wafer Plane Inspection technology, and explores the application of this technology to advanced reticle inspection. A total of twelve representative critical layers were inspected using WPI die-to-die mode. The results from scanning these advanced reticles have shown that applying WPI with a pixel size of 90nm (WPI P90) captures all the defects of interest (DOI) with low false defect detection rates. In validating CD predictions, the delta CDs from WPI are compared against Aerial Imaging Measurement System (AIMS), where a good correlation is established between WPI and AIMSTM.

76 FR 77583 - Vantage Pipeline US LP; Notice of Intent To Prepare an Environmental Assessment and Request for...

Science.gov (United States)

2011-12-13

... DEPARTMENT OF STATE [Public Notice 7728] Vantage Pipeline US LP; Notice of Intent To Prepare an... Section 106 of the National Historic Preservation Act for the Proposed Vantage Pipeline Project December 9... (EA) that will discuss the environmental impacts of the Vantage Pipeline Project involving...

Development of Inspection Robots for Bridge Cables

Directory of Open Access Journals (Sweden)

Hae-Bum Yun

2013-01-01

Full Text Available This paper presents the bridge cable inspection robot developed in Korea. Two types of the cable inspection robots were developed for cable-suspension bridges and cable-stayed bridge. The design of the robot system and performance of the NDT techniques associated with the cable inspection robot are discussed. A review on recent advances in emerging robot-based inspection technologies for bridge cables and current bridge cable inspection methods is also presented.

Developing the information management system for safeguards national inspection

Energy Technology Data Exchange (ETDEWEB)

Park, S. J.; Jeon, I.; Park, W. S.; Min, K. S. [KAERI, Taejon (Korea, Republic of)

2003-10-01

The inspection information management system for safeguards national inspection is aimed to do the national safeguards inspection with efficiency, and to decrease the inspector's load to write inspection report by systematizing the inspection jobs and sharing the inspection data. National safeguards inspection is consisted two large jobs. The first is the national safeguards supporting job of managing to support the national inspection mission. The other is the writing a national inspection report after completing the national inspection. Before the developing of inspection information management system, the official tools(spread sheet, word processor) are usually used. But there is problem to share the data, to produce the statistics data. To solve the these problem, we developed the inspection information management system that process the job from initial to final inspection work, and opened user education. This paper explain the procedure of developing the inspection information management system for safeguards national inspection.

Influence of fruit drinks with or without lactobacillus Lp299v on the gastrointestinal uptake of paracetamol in man

DEFF Research Database (Denmark)

Akerman, Ulrika; Edvinsson, Lars

2009-01-01

BACKGROUND: Clinical observations have revealed that patients throw up undigested paracetamol tablets several hours following intake of rosehip drink with Lp299v (Proviva). The purpose of this study was to demonstrate if this translates into altered plasma levels of paracetamol in nineteen healthy...... subjects consuming 200 ml of water, Rose hip drink or Proviva together with 1.5 gram of paracetamol. FINDINGS: The concentration of paracetamol in plasma increased rapidly when the paracetamol-containing tablets were consumed together with water and after 30 minutes a median level of 90 mumol/l was reached...... (a 95% confidence interval of 57,161). The corresponding 30 minutes values of paracetamol levels in the presence of rosehip with or without Lp299v were 0 mumol/l (95% confidence intervals contain only zero for both rosehip treatments). There were significant differences in AUC, maximal paracetamol...

Thermographic inspection of pipes, tanks, and containment liners

Energy Technology Data Exchange (ETDEWEB)

Renshaw, Jeremy B., E-mail: jrenshaw@epri.com; Muthu, Nathan [Electric Power Research Institute, 1300 West WT Harris Blvd., Charlotte, NC 28262 (United States); Lhota, James R.; Shepard, Steven M., E-mail: sshepard@thermalwave.com [Thermal Wave Imaging, 845 Livernois St., Ferndale, MI 48220 (United States)

2015-03-31

Nuclear power plants are required to operate at a high level of safety. Recent industry and license renewal commitments aim to further increase safety by requiring the inspection of components that have not traditionally undergone detailed inspected in the past, such as tanks and liners. NEI 09-14 requires the inspection of buried pipes and tanks while containment liner inspections are required as a part of license renewal commitments. Containment liner inspections must inspect the carbon steel liner for defects - such as corrosion - that could threaten the pressure boundary and ideally, should be able to inspect the surrounding concrete for foreign material that could be in contact with the steel liner and potentially initiate corrosion. Such an inspection requires a simultaneous evaluation of two materials with very different material properties. Rapid, yet detailed, inspection results are required due to the massive size of the tanks and containment liners to be inspected. For this reason, thermal NDE methods were evaluated to inspect tank and containment liner mockups with simulated defects. Thermographic Signal Reconstruction (TSR) was utilized to enhance the images and provide detailed information on the sizes and shapes of the observed defects. The results show that thermographic inspection is highly sensitive to the defects of interest and is capable of rapidly inspecting large areas.

7 CFR 75.21 - Grain sample inspection.

Science.gov (United States)

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Grain sample inspection. 75.21 Section 75.21... AND CERTIFICATION OF QUALITY OF AGRICULTURAL AND VEGETABLE SEEDS Inspection § 75.21 Grain sample inspection. A sample inspection shall be performed by examining official grain samples received from FGIS to...

7 CFR 868.44 - New original inspection.

Science.gov (United States)

2010-01-01

... 7 Agriculture 7 2010-01-01 2010-01-01 false New original inspection. 868.44 Section 868.44... FOR CERTAIN AGRICULTURAL COMMODITIES Regulations Original Inspection Service § 868.44 New original... applicant may request a new original inspection on any previously inspected lot; except that a new original...

49 CFR 396.13 - Driver inspection.

Science.gov (United States)

2010-10-01

... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR CARRIER SAFETY REGULATIONS INSPECTION, REPAIR, AND MAINTENANCE § 396.13 Driver inspection. Before driving a motor vehicle, the driver shall: (a) Be satisfied that the motor vehicle is in safe operating condition; (b) Review the last driver vehicle inspection...

Laser Safety Inspection Criteria

International Nuclear Information System (INIS)

Barat, K

2005-01-01

A responsibility of the Laser Safety Officer (LSO) is to perform laser safety audits. The American National Standard Z136.1 Safe use of Lasers references this requirement in several sections: (1) Section 1.3.2 LSO Specific Responsibilities states under Hazard Evaluation, ''The LSO shall be responsible for hazards evaluation of laser work areas''; (2) Section 1.3.2.8, Safety Features Audits, ''The LSO shall ensure that the safety features of the laser installation facilities and laser equipment are audited periodically to assure proper operation''; and (3) Appendix D, under Survey and Inspections, it states, ''the LSO will survey by inspection, as considered necessary, all areas where laser equipment is used''. Therefore, for facilities using Class 3B and or Class 4 lasers, audits for laser safety compliance are expected to be conducted. The composition, frequency and rigueur of that inspection/audit rests in the hands of the LSO. A common practice for institutions is to develop laser audit checklists or survey forms. In many institutions, a sole Laser Safety Officer (LSO) or a number of Deputy LSO's perform these audits. For that matter, there are institutions that request users to perform a self-assessment audit. Many items on the common audit list and the associated findings are subjective because they are based on the experience and interest of the LSO or auditor in particular items on the checklist. Beam block usage is an example; to one set of eyes a particular arrangement might be completely adequate, while to another the installation may be inadequate. In order to provide more consistency, the National Ignition Facility Directorate at Lawrence Livermore National Laboratory (NIF-LLNL) has established criteria for a number of items found on the typical laser safety audit form. These criteria are distributed to laser users, and they serve two broad purposes: first, it gives the user an expectation of what will be reviewed by an auditor, and second, it is an

Do school inspections improve primary school performance?

OpenAIRE

Dinand Webbink; Rob Luginbuhl; I. de Wolf

2007-01-01

Inspectors from the Dutch Inspectorate of Education inspect primary schools, write inspection reports on each inspected school, and make recommendations as to how each school can improve. We test whether these inspections result in better school performance. Using a fixed-effects model, we find evidence that school inspections do lead to measurably better school performance. Our assessment of school performance is based on the Cito test scores of pupils in their final year of primary school. ...

L_p- and S_{p,q}^rB-discrepancy of (order 2) digital nets

OpenAIRE

Markhasin, Lev

2014-01-01

Dick proved that all order $2$ digital nets satisfy optimal upper bounds of the $L_2$-discrepancy. We give an alternative proof for this fact using Haar bases. Furthermore, we prove that all digital nets satisfy optimal upper bounds of the $S_{p,q}^r B$-discrepancy for a certain parameter range and enlarge that range for order $2$ digitals nets. $L_p$-, $S_{p,q}^r F$- and $S_p^r H$-discrepancy is considered as well.

Travelling type monitoring and inspection device

International Nuclear Information System (INIS)

Ito, Takao; Maruki, Hideaki.

1994-01-01

The present invention sufficiently ensures video output images even if lenses of a television camera of a monitoring means are degraded to reduce the quantity of transmission light. That is, a light amount control mechanism capable of controlling the quantity of illumination light irradiated from an illumination device at an output level of a sensor of an inspection device main body. A test chart for measuring a luminance which is an output level of the sensor is disposed. During plant operation, the lenses of the television camera undergo influences of radioactivity and are degraded to reduce the quantity of transmission light on every periodical monitoring and inspection using a travelling type monitoring inspection device. In this case, the test chart disposed near the equipment to be monitored and inspected is caught by the television camera to measure a sensor output luminance. Then, the light amount control mechanism of the illumination device is controlled so as to provide a luminance which has been set at an initial stage of the plant inspection. With such procedures, video data of the objective equipment to be monitored and inspected can be obtained at a constant luminance during inspection. (I.S.)

Integrating theory and data to create an online self-management programme for adults with type 2 diabetes: HeLP-Diabetes

Directory of Open Access Journals (Sweden)

Kingshuk Pal

2015-10-01

This protocol demonstrates a multi-disciplinary approach to combining evidence from multiple sources to create ’HeLP-Diabetes’: a theory and evidence based online self-management intervention for adults with type 2 diabetes.

Magnetic rubber inspection (MRI)

International Nuclear Information System (INIS)

Carro, L.

1997-01-01

Magnetic Rubber Inspection (MRI) was developed to inspect for small cracks and flaws encountered in high performance aircraft. A formula of very fine magnetic particles immersed in a room temperature curing rubber is catalysed and poured into dams (retainers) on the surface of the part to be inspected. Inducing a magnetic field then causes the particles to be drawn to discontinuities in the component under test. These indicating particles are held to the discontinuity by magnetic attraction, as the rubber cures. The solid rubber cast (Replica) is then removed and examined under a microscope for indicating lines of particle concentrations. 3 refs., 6 figs

76 FR 77580 - Contemporary Healthcare Senior Lien Fund I, LP; Notice Seeking Exemption Under Section 312 of the...

Science.gov (United States)

2011-12-13

... closing costs and for working capital purposes. The financing is brought within the purview of Sec. 107... SMALL BUSINESS ADMINISTRATION [License No. 02/02-0649] Contemporary Healthcare Senior Lien Fund I, LP; Notice Seeking Exemption Under Section 312 of the Small Business Investment Act, Conflicts of...

78 FR 57444 - Eagle Fund III-A, L.P.; Notice Seeking Exemption Under the Small Business Investment Act...

Science.gov (United States)

2013-09-18

... the Small Business Investment Act of 1958, as amended (the ``Act''), in connection with the financing..., Financings which Constitute Conflicts of Interest, of the Small Business Administration (``SBA'') Rules and... SMALL BUSINESS ADMINISTRATION [License No. 07/07-0117] Eagle Fund III-A, L.P.; Notice Seeking...

DETERMINATION OF LEVEL OF FOOD ADDITIVES IN Labisia pumila (LP) BEVERAGES CONSUMED IN KUANTAN, MALAYSIA

OpenAIRE

Iwansyah, Ade Chandra; Yusoff, Masithah Mohammad; Kormin, Faridah

2013-01-01

The content levels of several food additives (gallic acid, benzoic acid and caffeine) in commercial Labisia pumila (LP) beverage samples in Kuantan, Malaysia were determined by high performances liquid chromatography (HPLC). These analytical measurements were undertaken primarily to assess the compliance of content levels of the investigated food additives and their daily intake doses with permissible levels. The results obtained from this study indicated that the average levels of GA, caffei...

29 CFR 1960.31 - Inspections by OSHA.

Science.gov (United States)

2010-07-01

... 29 Labor 9 2010-07-01 2010-07-01 false Inspections by OSHA. 1960.31 Section 1960.31 Labor... MATTERS Inspection and Abatement § 1960.31 Inspections by OSHA. (a) The Secretary or the Secretary's... scheduled inspections as an integral part of OSHA's evaluation of an agency's safety and health program in...

License - PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods | LSDB Archive [Life Science Database Archive metadata

Lifescience Database Archive (English)

Full Text Available List Contact us PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods ...t list, Marker list, QTL list, Plant DB link & Genome analysis methods © Satoshi ... Policy | Contact Us License - PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods | LSDB Archive ...

Container Inspection Utilizing 14 MeV Neutrons

Science.gov (United States)

Valkovic, Vladivoj; Sudac, Davorin; Nad, Karlo; Obhodas, Jasmina

2016-06-01

A proposal for an autonomous and flexible ship container inspection system is presented. This could be accomplished by the incorporation of an inspection system on various container transportation devices (straddle carriers, yard gentry cranes, automated guided vehicles, trailers). The configuration is terminal specific and it should be defined by the container terminal operator. This enables that no part of the port operational area is used for inspection. The inspection scenario includes container transfer from ship to transportation device with the inspection unit mounted on it. The inspection is performed during actual container movement to the container location. A neutron generator without associated alpha particle detection is used. This allows the use of higher neutron intensities (5 × 109 - 1010 n/s in 4π). The inspected container is stationary in the “inspection position” on the transportation device while the “inspection unit” moves along its side. The following analytical methods will be used simultaneously: neutron radiography, X-ray radiography, neutron activation analysis, (n, γ) and (n,n'γ) reactions, neutron absorption. and scattering, X-ray backscattering. The neutron techniques will utilize “smart collimators” for neutrons and gamma rays, both emitted and detected. The inspected voxel is defined by the intersection of the neutron generator and the detectors solid angles. The container inspection protocol is based on identification of discrepancies between the cargo manifest, elemental “fingerprint” and radiography profiles. In addition, the information on container weight is obtained during the container transport and screening by measuring of density of material in the container.

Bedre ældrepleje - ved hjælp af Marte Meo metoden

DEFF Research Database (Denmark)

Meyer, Helle; Schjoldager, Helle Højbo

Projektet (forløb efteråret 2008 - foråret 2009) havde til formål at give personalet ved boformer for borgere med demens indsigt i og redskaber til at kommunikere med borgeren på en for begge parter anerkendende måde - ved hjælp af Marte Meo metoden. Det konkluderes at implementering af Marte Meo...... metoden har medført, at personalet har udviklet deres samspil og kommunikation med borgerne på en måde, der synes at fremme borgerens trivsel, værdighed og livsglæde og dermed bidrage til en øget livskvalitet. En række faktorer der henholdsvis fremmer og hæmmer implementeringen af Marte Meo metoden...

DisLexList

DEFF Research Database (Denmark)

2013-01-01

DisLexList is a simple analysis script for the generation of lists of lexemes in discourses, and may be used as a tool in discourse analysis (critical and otherwise). DisLexList is, in its current state, able to generate simple word lists and lexeme list based on output from VISL's flat structure...

Automated ultrasonic inspection of nuclear plant components

International Nuclear Information System (INIS)

Baron, J.A.; Dolbey, M.P.

1982-01-01

For reasons of safety and efficiency, automated systems are used in performing ultrasonic inspection of nuclear components. An automated system designed specifically for the inspection of headers in a nuclear plant is described. In-service inspection results obtained with this system are shown to correlate with pre-service inspection results obtained by manual methods

14 CFR 145.223 - FAA inspections.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false FAA inspections. 145.223 Section 145.223... OTHER CERTIFICATED AGENCIES REPAIR STATIONS Operating Rules § 145.223 FAA inspections. (a) A certificated repair station must allow the FAA to inspect that repair station at any time to determine...

Generator acceptance test and inspection report