International Nuclear Information System (INIS)
Sena, Rennio F. de; Tambosi, Jose L.; Floriani, Silvia L.; Virmond, Elaine; Schroeder, Horst Fr.; Moreira, Regina F.P.M.; Jose, Humberto J.
2009-01-01
The biosolids (BS) generated in the wastewater treatment process of a meat processing plant were monitored and the priority pollutant content was characterized. The trace metal and organic pollutant content - polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/PCDF) - were determined quantitatively and compared to guideline limits established by the US EPA and EU. PCBs were not detected in the solid samples, while trace metals, PAHs and PCDD/PCDF were detected in concentrations below the limits established by international standards. Toxic equivalent factors were evaluated for the biosolids, and the results proved that these wastes can be safely deposited on land or used in combustion/incineration plants. Since no previous data were found for meat processing waste, comparisons were made using municipal sewage sludge data reported in the literature. Since, this report monitored part of the priority pollutants established by the US EPA for meat and poultry processing wastewater and sludge, the results verified that low pollution loads are generated by the meat processing plant located in the southern part of Brazil. However, the BS generated in the treatment processes are in accordance with the limits established for waste disposal and even for soil fertilizer.
Potential priority pollutants in sewage sludge
DEFF Research Database (Denmark)
Eriksson, Eva; Christensen, Nina; Schmidt, Jens Ejbye
2008-01-01
compounds using their inherent properties and environmental fate it was shown that 99 XOCs could be classified as being hazardous with regard to the solid phase and 23 were found to be priority pollutants in the subsequent hazard assessment. The final selected priority pollutants can act as indicators when...... assessing sludge quality. They were compared with European legislations and discussed in regard for pointing out the need for mitigation such as substitution. Furthermore, the potential need for implementation of sludge treatment trains in order to meet the society's needs was addressed....
Priority pollutant analysis of MHD-derived combustion products
Parks, Katherine D.
An important factor in developing Magnetohydrodynamics (MHD) for commercial applications is environmental impact. Consequently, an effort was initiated to identify and quantify any possible undesirable minute chemical constituents in MHD waste streams, with special emphasis on the priority pollutant species. This paper discusses how priority pollutant analyses were used to accomplish the following goals at the University of Tennessee Space Institute (UTSI): comparison of the composition of solid combustion products collected from various locations along a prototypical MHD flow train during the firing of Illinois No. 6 and Montana Rosebud coals; comparison of solid waste products generated from MHD and conventional power plant technologies; and identification of a suitable disposal option for various MHD derived combustion products. Results from our ongoing research plans for gas phase sampling and analysis of priority pollutant volatiles, semi-volatiles, and metals are discussed.
Determining priorities of current and long-range pollution control projects
Energy Technology Data Exchange (ETDEWEB)
Clark, E O
1977-01-01
The dilemma facing corporations of setting priorities on pollution control projects is reviewed and procedural guidelines outlined. The management must support those assigned to analyze priorities so that they have the opportunity to experiment and make quantitative studies, to evaluate their results, and to make independent recommendations. Priority is then given to the problems of air, noise, water, and land pollution in accordance with the company's environmental record. Each of the four categories, however, has its own legal, technical, and financial aspects that require further priority analysis. Each company must adopt and publish a regularly updated environmental policy that will have public visibility. (DCK)
2011-03-02
..., Reporting and recordkeeping requirements, Superfund, Water pollution control, Water supply. Dated: February... and Hazardous Substances Pollution Contingency Plan; National Priorities List: Partial Deletion of the... Mexico, from the National Priorities List (NPL). The NPL, promulgated pursuant to section 105 of the...
Integrated modelling of Priority Pollutants in stormwater systems
DEFF Research Database (Denmark)
Vezzaro, Luca; Ledin, Anna; Mikkelsen, Peter Steen
2012-01-01
The increasing focus on urban diffuse sources of Priority Pollutants (PPs) has highlighted stormwater as an important contributor to contamination of natural water bodies. This study presents an example of an integrated model developed to be able to quantify PP loads discharged by stormwater...
Ng, Nyuk-Ting; Kamaruddin, Amirah Farhan; Wan Ibrahim, Wan Aini; Sanagi, Mohd Marsin; Abdul Keyon, Aemi S
2018-01-01
The efficiency of the extraction and removal of pollutants from food and the environment has been an important issue in analytical science. By incorporating inorganic species into an organic matrix, a new material known as an organic-inorganic hybrid material is formed. As it possesses high selectivity, permeability, and mechanical and chemical stabilities, organic-inorganic hybrid materials constitute an emerging research field and have become popular to serve as sorbents in various separaton science methods. Here, we review recent significant advances in analytical solid-phase extraction employing organic-inorganic composite/nanocomposite sorbents for the extraction of organic and inorganic pollutants from various types of food and environmental matrices. The physicochemical characteristics, extraction properties, and analytical performances of sorbents are discussed; including morphology and surface characteristics, types of functional groups, interaction mechanism, selectivity and sensitivity, accuracy, and regeneration abilities. Organic-inorganic hybrid sorbents combined with extraction techniques are highly promising for sample preparation of various food and environmental matrixes with analytes at trace levels. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
Evaluation of Pollutant Loads: Organic and Inorganic in River ...
African Journals Online (AJOL)
This study was carried out to determine the organic and inorganic pollutant loads in River Ukoghor of the Lower Benue Basin. Grab water samples were collected from the outlet of the River into River Benue, twice a month in three replications for a period of eight months (April November, 2002) using sterilized one-litre ...
International Nuclear Information System (INIS)
Zhang Changbo; Wu Longhua; Luo Yongming; Zhang Haibo; Christie, Peter
2008-01-01
Principal components analysis (PCA) and correlation analysis were used to estimate the contribution of four components related to pollutant sources on the total variation in concentrations of Cu, Zn, Pb, Cd, As, Se, Hg, Fe and Mn in surface soil samples from a valley in east China with numerous copper and zinc smelters. Results indicate that when carrying out source identification of inorganic pollutants their tendency to migrate in soils may result in differences between the pollutant composition of the source and the receptor soil, potentially leading to errors in the characterization of pollutants using multivariate statistics. The stability and potential migration or movement of pollutants in soils must therefore be taken into account. Soil physicochemical properties may offer additional useful information. Two different mechanisms have been hypothesized for correlations between soil heavy metal concentrations and soil organic matter content and these may be helpful in interpreting the statistical analysis. - Principal components analysis with Varimax rotation can help identify sources of soil inorganic pollutants but pollutant migration and soil properties can exert important effects
2011-09-13
... and Hazardous Substances Pollution Contingency Plan National Priorities List AGENCY: Environmental... protection, Air pollution control, Chemicals, Hazardous Waste, Hazardous substances, Intergovernmental... processing the deletion notice. The online Federal Document Management System (FDMS) did not include required...
2011-09-13
... and Hazardous Substances Pollution Contingency Plan National Priorities List AGENCY: Environmental... pollution control, Chemicals, Hazardous Waste, Hazardous substances, Intergovernmental relations, Penalties... error in processing the direct- final rule. The online Federal Document Management System (FDMS) did not...
2011-01-05
..., Intergovernmental relations, Penalties, Reporting and recordkeeping requirements, Superfund, Water pollution control... and Hazardous Substances Pollution Contingency Plan; National Priorities List: Partial Deletion of the... Site is located in Albuquerque, Bernalillo County, New Mexico. After this deletion, this 62 acres will...
2013-12-06
... Substances Pollution Contingency Plan (NCP). This partial deletion pertains to the soil of 1,154 residential...] National Oil and Hazardous Substances Pollution Contingency Plan; National Priorities List: Partial Deletion of the Omaha Lead Superfund Site AGENCY: Environmental Protection Agency (EPA). ACTION: Final rule...
2013-02-19
... and Hazardous Substances Pollution Contingency Plan National Priorities List: Deletion of the Kerr... Substances Pollution Contingency Plan (NCP). EPA and the State of Illinois, through the Illinois... because we view this as a noncontroversial revision and anticipate no adverse comment. We have explained...
2013-11-19
...] National Oil and Hazardous Substances Pollution Contingency Plan; National Priorities List: Partial... and Hazardous Substances Pollution Contingency Plan (NCP). The EPA and the State of California... Corp Air Station Superfund Site without prior Notice of Intent for Partial Deletion because EPA views...
2011-04-13
... and Hazardous Substance Pollution Contingency Plan National Priorities List: Deletion of the... Substances Pollution Contingency Plan (NCP). EPA and the State of Michigan, through the Michigan Department... Delete because we view this as a noncontroversial revision and anticipate no adverse comment. We have...
2010-07-23
... and Hazardous Substances Pollution Contingency Plan; National Priorities List: Intent to Partially..., as amended, is an appendix of the National Oil and Hazardous Substances Pollution Contingency Plan... Intent for Partial Deletion because EPA views this as a noncontroversial revision and anticipates no...
Ex-Situ Remediation Technologies for Environmental Pollutants: A Critical Perspective.
Kuppusamy, Saranya; Palanisami, Thavamani; Megharaj, Mallavarapu; Venkateswarlu, Kadiyala; Naidu, Ravi
2016-01-01
Pollution and the global health impacts from toxic environmental pollutants are presently of great concern. At present, more than 100 million people are at risk from exposure to a plethora of toxic organic and inorganic pollutants. This review is an exploration of the ex-situ technologies for cleaning-up the contaminated soil, groundwater and air emissions, highlighting their principles, advantages, deficiencies and the knowledge gaps. Challenges and strategies for removing different types of contaminants, mainly heavy metals and priority organic pollutants, are also described.
Priority Substances and Emerging Organic Pollutants in Portuguese Aquatic Environment: A Review.
Ribeiro, Cláudia; Ribeiro, Ana Rita; Tiritan, Maria Elizabeth
Aquatic environments are among the most noteworthy ecosystems regarding chemical pollution due to the anthropogenic pressure. In 2000, the European Commission implemented the Water Framework Directive, with the aim of progressively reducing aquatic chemical pollution of the European Union countries. Therefore, the knowledge about the chemical and ecological status is imperative to determine the overall quality of water bodies. Concerning Portugal, some studies have demonstrated the presence of pollutants in the aquatic environment but an overall report is not available yet. The aim of this paper is to provide a comprehensive review about the occurrence of priority substances included in the Water Framework Directive and some classes of emerging organic pollutants that have been found in Portuguese aquatic environment. The most frequently studied compounds comprise industrial compounds, natural and synthetic estrogens, phytoestrogens, phytosterols, pesticides, pharmaceuticals and personal care products. Concentration of these pollutants ranged from few ng L(-1) to higher values such as 30 μg L(-1) for industrial compounds in surface waters and up to 106 μg L(-1) for the pharmaceutical ibuprofen in wastewaters. Compounds already banned in Europe such as atrazine, alkylphenols and alkylphenol polyethoxylates are still found in surface waters, nevertheless their origin is still poorly understood. Beyond the contamination of the Portuguese aquatic environment by priority substances and emerging organic pollutants, this review also highlights the need of more research on other classes of pollutants and emphasizes the importance of extending this research to other locations in Portugal, which have not been investigated yet.
2013-07-30
... and Hazardous Substances Pollution Contingency Plan; National Priorities List: Deletion of the Craig... Substances Pollution Contingency Plan (NCP). The EPA and the Commonwealth of Pennsylvania, through the... Craig Farm Drum Superfund Site without prior Notice of Intent to Delete because we view this as a...
2011-07-29
... and Hazardous Substances Pollution Contingency Plan; National Priorities List: Notice of Intent for..., as amended, is an appendix of the National Oil and Hazardous Substances Pollution Contingency Plan... PBL Superfund Site without prior Notice of Intent for Deletion because EPA views this as a...
2011-04-01
... and Hazardous Substances Pollution Contingency Plan; National Priorities List: Deletion of the Norwood... amended, is an appendix of the National Oil and Hazardous Substances Pollution Contingency Plan (NCP). The... we view this as a noncontroversial revision and anticipate no adverse comment. We have explained our...
2013-07-24
... and Hazardous Substances Pollution Contingency Plan; National Priorities List: Deletion of the Sola... Pollution Contingency Plan (NCP). The EPA and the State of California, through the Regional Water Quality...., Inc. Superfund Site without prior Notice of Intent to Delete because we view this as a...
2011-06-03
... and Hazardous Substances Pollution Contingency Plan; National Priorities List: Intent To Delete the... Substances Pollution Contingency Plan (NCP). The EPA and the State of Delaware, through the Delaware... Delete because EPA views this as a noncontroversial revision and anticipates no adverse comment. We have...
2011-12-29
... and Hazardous Substances Pollution Contingency Plan; National Priorities List: Deletion of the Hipps..., as amended, is an appendix of the National Oil and Hazardous Substances Pollution Contingency Plan... of Intent to Delete because we view this as a noncontroversial revision and anticipate no adverse...
2013-07-26
... and Hazardous Substances Pollution Contingency Plan; National Priorities List: Deletion of the Cannon... Substances Pollution Contingency Plan (NCP). The EPA and the State of Massachusetts, through the...), Superfund Site without prior Notice of Intent to Delete because we view this as a noncontroversial revision...
2012-11-14
... and Hazardous Substance Pollution Contingency Plan National Priorities List: Deletion of the Waste... and Hazardous Substances Pollution Contingency Plan (NCP). EPA and the State of Michigan, through the...-Holland Lagoons Superfund Site without prior Notice of Intent to Delete because we view this as a...
International Nuclear Information System (INIS)
Marin Galvin, R.; Ripolles Pascual, F.; Santateresa Forcada, E.; Lahora Cano, A.; Mantecon Pascual, R.; Rodriguez Amaro, R.
2009-01-01
Spanish's waste water shoes a conventional pollution, and increased DQO values. Contains several organic and inorganic compounds. For domestic wastewater this situation imply to apply measures of control from the origin and another of environmental education. While WWTP investigated obtain high yielding in treatment of metals, HPA, VOC and alquilphenols, the behaviour versus plaguicides, thin-organic compounds and other organic is more un-favourable. Several substances overpasses the values established in the E-PRTR normative, so in the next future could be experience problems to fulfil the normative about this subject, as well as those related to reuse of treated wastewater and bio-solids generated in the WWP. (Author) 9 refs.
2010-06-15
... and Hazardous Substances Pollution Contingency Plan; National Priorities List: Notice of Intent for... Notice of Intent to Delete the soils of Operable Unit 1 and the underlying ground water of the... National Oil and Hazardous Substances Pollution Contingency Plan (NCP). The EPA and the State of Texas...
2010-09-13
... and Hazardous Substances Pollution Contingency Plan; National Priorities List: Partial Deletion of the... . SUPPLEMENTARY INFORMATION: The portion of the site to be deleted from the NPL is the surface media (soil... further actions. List of Subjects in 40 CFR Part 300 Environmental protection, Air pollution control...
2011-08-15
... and Hazardous Substance Pollution Contingency Plan; National Priorities List: Deletion of the... Substances Pollution Contingency Plan (NCP). The EPA and the State of New Jersey, through the New Jersey... Deletion of the Sayreville Landfill Superfund Site without prior Notice of Intent to Delete because we view...
2013-11-05
...] National Oil and Hazardous Substances Pollution Contingency Plan; National Priorities List: Deletion of the... Substances Pollution Contingency Plan (NCP). The EPA and the State of South Carolina, through the South... because we view this as a noncontroversial revision and anticipate no adverse comment. We have explained...
2013-10-02
...] National Oil and Hazardous Substances Pollution Contingency Plan; National Priorities List: Deletion of the... final Notice of Deletion of the Ludlow Sand & Gravel Superfund Site (Site), located in the Town of Paris..., as amended, is an appendix of the National Oil and Hazardous Substances Pollution Contingency Plan...
2013-08-12
... and Hazardous Substances Pollution Contingency Plan; National Priorities List: Deletion of the Mosley... National Oil and Hazardous Substances Pollution Contingency Plan (NCP). The EPA and the State of Oklahoma... Deletion of the MRSL Superfund Site without prior Notice of Intent to Delete because we view this as a...
2011-11-10
... and Hazardous Substance Pollution Contingency Plan; National Priorities List: Partial Deletion of the...). Refer to Figures 1 to 3 in the deletion docket to view the location of the two parcels being proposed... Substances Pollution Contingency Plan (NCP). This direct final partial deletion is being published by EPA...
2013-10-02
...] National Oil and Hazardous Substances Pollution Contingency Plan; National Priorities List: Deletion of the... Substances Pollution Contingency Plan (NCP). EPA and the State of New York, through the New York State... Deletion of the Site without prior Notice of Intent to Delete because EPA views this as a noncontroversial...
Source-Flux-Fate Modelling of Priority Pollutants in Stormwater Systems
DEFF Research Database (Denmark)
Vezzaro, Luca
quality management. The thesis provides a framework for the trustworthy application of models to estimate PP fluxes from their sources, and through stormwater drainage systems, and to the sink. This fills a knowledge gap regarding stormwater PP and it supplies urban water managers with modelling tools......The increasing focus on management of stormwater Priority Pollutants (PP) enhances the role of mathematical models as support for the assessment of stormwater quality control strategies. This thesis investigates and presents modelling approaches that are suitable to simulate PP fluxes across...... stormwater systems, supporting the development of pollution control strategies. This is obtained by analyzing four study areas: (i) catchment characterization, (ii) pollutant release and transport models, (iii) stormwater treatment models, and (iv) combination of the above into an integrated model. Given...
2010-09-09
... and Hazardous Substance Pollution Contingency Plan; National Priorities List; Intent for Partial... amended, is an Appendix of the National Oil and Hazardous Substances Pollution Contingency Plan (NCP). The... Superfund Site without prior Notice of Intent for Partial Deletion because EPA views this as a...
2011-11-10
... and Hazardous Substance Pollution Contingency Plan National Priorities List: Partial Deletion of the... appendix of the National Oil and Hazardous Substances Pollution Contingency Plan (NCP). EPA and the State... property PINs listed above. The deletion of these two parcels from the Site affects all surface soils...
2010-08-06
... and Hazardous Substance Pollution Contingency Plan; National Priorities List: Intent To Delete the... appendix of the National Oil and Hazardous Substances Pollution Contingency Plan (NCP). The EPA and the... Corporation (Markhams) Superfund Site without prior notice of intent to delete because we view this as a...
Strategies for monitoring of priority pollutant emission barriers
DEFF Research Database (Denmark)
Pettersson, Maria; De Keyser, Webbey; Birch, Heidi
2010-01-01
The objective of Task 7.5 was to develop tools for model-based planning of sampling campaigns in the design of monitoring strategies for priority pollutant emission barriers. Using integrated urban wastewater system (IUWS) models, measurement campaigns can be designed to improve the calibration...... to be implemented in the IUWS model, as well as the sampling and measuring devices that will be used. The simulation results are presented as a Substance Flow Analysis (SFA). These SFAs can be compared with empirical SFAs and can also be used to set up measurement campaigns aiming at gathering information...
Environmental impact of hazardous inorganic materials. Pollution and remediation of soils
Energy Technology Data Exchange (ETDEWEB)
Tokunaga, S.; Hakuta, T. [National Institute of Materials and Chemical Research, Tsukuba (Japan); Barrington, S.; Wasay, S. [McGill University, (Canada)
1998-02-10
Recently, soil pollution has become a grave social problem. This paper reviews history, laws and regulations, current status and measures related to soil pollution, centered by those of Japan. Soil pollution problems in Japan date back to around 1880, when pollution of the Watarase River basin started by waste water exhausted from Asio Mine. Various grave problems have been recorded since then, including the Itai-itai and Minamata Diseases caused by Cd and methyl mercury, respectively, which started in 1945 and 1956, with the result that the government has amended laws/regulations related to treatment and cleaning of industrial wastes. Later, the related laws/regulations have been frequently amended, and the environmental standards related to soil pollution was established in 1991. Treatment for remediation of polluted soils has been effected with the aid of inorganic acids, organic solvents, chelating agents, natural organic acids (such as acetic and formic acids) and biological surface active agents. They must be carefully planned to take into consideration various aspects, such as pH level and other conditions, cost and environmental safety, before being actually used. One of the recommended measures is on-the-site treatment in an enclosed space while regenerating and recycling the agent. 66 refs., 7 figs., 8 tabs.
Inorganic Pollutants in Wet Atmospheric Deposition and the Trajectories of Their Possible Transport
Czech Academy of Sciences Publication Activity Database
Vach, Marek; Skřivan, Petr; Rohovec, Jan; Fišák, Jaroslav; Kubínová, P.; Burian, Miloš
2009-01-01
Roč. 196, 1-4 (2009), s. 369-383 ISSN 0049-6979 R&D Projects: GA ČR GA205/04/0088 Institutional research plan: CEZ:AV0Z30130516; CEZ:AV0Z30420517 Keywords : trajectory analysis * source apportionment * precipitation episodes * inorganic pollutants Subject RIV: DD - Geochemistry Impact factor: 1.676, year: 2009
2010-07-30
... State Registry of Inactive Hazardous Waste Disposal Sites as a ``Class 2 Inactive Hazardous Waste Site..., Chemicals, Hazardous waste, Hazardous substances, Intergovernmental relations, Natural resources, Oil... and Hazardous Substances Pollution Contingency Plan; National Priorities List: Deletion of the SMS...
2012-05-25
... and Hazardous Substances Pollution Contingency Plan; National Priorities List: Partial Deletion of the... the surface soil, unsaturated subsurface soil, surface water and sediments of Operable Unit (OU) 1...: The Environmental Protection Agency (EPA) Region 8 announces the deletion of Operable Unit (OU) 1--the...
2013-08-05
... and Hazardous Substances Pollution Contingency Plan; National Priorities List: Deletion of the... Contingency Plan (NCP). The EPA and the State of Oklahoma, through the Oklahoma Department of Environmental... without prior Notice of Intent to Delete because we view this as a noncontroversial revision and...
2011-08-18
... and Hazardous Substances Pollution Contingency Plan; National Priorities List: Deletion of the... Contingency Plan (NCP). The EPA and the Commonwealth of Puerto Rico, through the Puerto Rico Environmental... Site without prior Notice of Intent to Delete because we view this as a noncontroversial revision and...
Developing risk-based priorities for reducing air pollution in urban settings in Ukraine.
Brody, Michael; Caldwell, Jane; Golub, Alexander
2007-02-01
Ukraine, when part of the former Soviet Union, was responsible for about 25% of its overall industrial production. This aging industrial infrastructure continues to emit enormous volumes of air and water pollution and wastes. The National Report on the State of Environment in Ukraine 1999 (Ukraine Ministry of Environmental Protection [MEP], 2000) shows significant air pollution. There are numerous emissions that have been associated with developmental effects, chronic long-term health effects, and cancer. Ukraine also has been identified as a major source of transboundary air pollution for the eastern Mediterranean region. Ukraine's Environment Ministry is not currently able to strategically target high-priority emissions and lacks the resources to address all these problems. For these reasons, the U.S. Environmental Protection Agency set up a partnership with Ukraine's Ministry of Environmental Protection to strengthen its capacity to set environmental priorities through the use of comparative environmental risk assessment and economic analysis--the Capacity Building Project. The project is also addressing improvements in the efficiency and effectiveness of the use of its National Environmental Protection Fund. The project consists of a series of workshops with Ukrainian MEP officials in comparative risk assessment of air pollutant emissions in several heavily industrialized oblasts; cost-benefit and cost-effectiveness analysis; and environmental finance. Pilot risk assessment analyses have been completed. At the end of the Capacity Building Project it is expected that the use of the National Environmental Protection fund and the regional level oblast environmental protection funds will begin to target and identify the highest health and environmental risk emissions.
2011-07-29
... and Hazardous Substances Pollution Contingency Plan; National Priorities List: Notice of Intent for... Contingency Plan (NCP). The EPA and the State of Texas, through the Texas Commission on Environmental Quality... Notice of Deletion for SMPA Superfund Site without prior Notice of Intent for Deletion because EPA views...
2012-07-25
... and Hazardous Substances Pollution Contingency Plan; National Priorities List: Deletion of the Fort... Contingency Plan (NCP). The EPA and the State of New Jersey, through the NJ Department of Environmental... Intent to Delete because we view this as a noncontroversial revision and anticipate no adverse comment...
Global research priorities to mitigate plastic pollution impacts on marine wildlife
Vegter, Amanda C.; Barletta, Mário; Beck, Cathy A.; Borrero, Jose C.; Burton, Harry; Campbell, Marnie L.; Costa, Monica F.; Eriksen, Marcus; Eriksson, Cecilia; Estrades, Andres; Gilardi, Kirsten V.; Hardesty, Britta D.; do Sul, Juliana A. Ivar; Lavers, Jennifer L.; Lazar, Bojan; Lebreton, Laurent; Nichols, Wallace J.; Ribic, Christine A.; Ryan, Peter G.; Schuyler, Qamar A.; Smith, Stephen D. A.; Takada, Hideshige; Townsend, Kathy A.; Wabnitz, Colette C. C.; Wilcox, Chris; Young, Lindsay C.; Hamann, Mark
2014-01-01
Marine wildlife faces a growing number of threats across the globe, and the survival of many species and populations will be dependent on conservation action. One threat in particular that has emerged over the last 4 decades is the pollution of oceanic and coastal habitats with plastic debris. The increased occurrence of plastics in marine ecosystems mirrors the increased prevalence of plastics in society, and reflects the high durability and persistence of plastics in the environment. In an effort to guide future research and assist mitigation approaches to marine conservation, we have generated a list of 16 priority research questions based on the expert opinions of 26 researchers from around the world, whose research expertise spans several disciplines, and covers each of the world’s oceans and the taxa most at risk from plastic pollution. This paper highlights a growing concern related to threats posed to marine wildlife from microplastics and fragmented debris, the need for data at scales relevant to management, and the urgent need to develop interdisciplinary research and management partnerships to limit the release of plastics into the environment and curb the future impacts of plastic pollution.
Hazardous air pollutants; Yugai taiki osen busshitsu
Energy Technology Data Exchange (ETDEWEB)
Ogata, A
2000-02-14
Hazardous air pollutants (HAPs) are chemical substances listed up since those have a fear of increasing carcinogenic danger even in a small quantity by a long-term exposure. In Europe and Japan, approximately 200 names of substances are known. Concretely, they are particulate substnaces such as floating dusts, gaseous inorganics such as fluorine compound and chroline gas, volatile organic compounds (VOCs). Among those, especially, 22 substances are cited as those that Japan tackles in priority. HAPs explained in this paper mean mostly VOCs such as benzene, tetrachloroethylene and trichloroethylene among those. (NEDO)
Effect of Inorganic Fertilizer on the Microbial degradation of Diesel ...
African Journals Online (AJOL)
The effect of Inorganic Fertilizer (IF) on the microbial degradation of diesel polluted soil in Abeokuta was assessed by collecting Top soil (0 – 15 cm depth) from diesel polluted site of Information and Communication Centre, Federal University of Agriculture, Abeokuta, Nigeria. Inorganic fertilizer was added to the polluted soil ...
Fungal Unspecific Peroxygenases Oxidize the Majority of Organic EPA Priority Pollutants
Directory of Open Access Journals (Sweden)
Alexander Karich
2017-08-01
Full Text Available Unspecific peroxygenases (UPOs are secreted fungal enzymes with promiscuity for oxygen transfer and oxidation reactions. Functionally, they represent hybrids of P450 monooxygenases and heme peroxidases; phylogenetically they belong to the family of heme-thiolate peroxidases. Two UPOs from the basidiomycetous fungi Agrocybe aegerita (AaeUPO and Marasmius rotula (MroUPO converted 35 out of 40 compounds listed as EPA priority pollutants, including chlorinated benzenes and their derivatives, halogenated biphenyl ethers, nitroaromatic compounds, polycyclic aromatic hydrocarbons (PAHs and phthalic acid derivatives. These oxygenations and oxidations resulted in diverse products and—if at all—were limited for three reasons: (i steric hindrance caused by multiple substitutions or bulkiness of the compound as such (e.g., hexachlorobenzene or large PAHs, (ii strong inactivation of aromatic rings (e.g., nitrobenzene, and (iii low water solubility (e.g., complex arenes. The general outcome of our study is that UPOs can be considered as extracellular counterparts of intracellular monooxygenases, both with respect to catalyzed reactions and catalytic versatility. Therefore, they should be taken into consideration as a relevant biocatalytic detoxification and biodegradation tool used by fungi when confronted with toxins, xenobiotics and pollutants in their natural environments.
Energy Technology Data Exchange (ETDEWEB)
Blanchard, C
2000-03-01
This work is made of 5 parts. The first chapter presents the regulatory aspects relative to the polluted sites and soils in France and in Europe in order to allow a better understanding of the stakes of this study. Chapter 2 proposes, first, a bibliographic synthesis of the hydro-mechanical and physico-chemical mechanisms controlling the transfer of pollutants in soils, and then, and exhaustive review of the laboratory tests that allow to evaluate the mobility of pollutants in soils. Chapter 3 is devoted to the experimental study of the interaction between a natural soil and 4 metals (As, Cr, Pb, Zn). It comprises the study of the adsorption-desorption kinetics and the implementation of adsorption-desorption isotherms. This chapter also introduces the notion of speciation (sequential extractions) and shows off the role played by the various constituents of the soil. An experiment of lead-humic acid equilibrium setting-up is proposed to evaluate the phenomenon of complexation on organic matter. Chapter 4 proposes to apply the selected laboratory tests to the previous natural soil artificially polluted in order to characterize the parameters necessary to obtain a mobility scale. The procedures are performed first, on a recently polluted soil and on the same soil after several months of aging. Chapter 5 applies the previously tested procedures to an industrial polluted soil (arsenic, chromium, lead, zinc) in order to propose an elaborated methodology for the evaluation of the mobility of inorganic pollutants. (J.S.)
Arkas, Michael; Allabashi, Roza; Tsiourvas, Dimitris; Mattausch, Eva-Maria; Perfler, Reinhard
2006-04-15
Long-alkyl chain functionalized poly(propylene imine) dendrimer, poly(ethylene imine) hyperbranched polymer, and beta-cyclodextrin derivatives, which are completely insoluble in water, have the property of encapsulating organic pollutants from water. Ceramic porous filters can be impregnated with these compounds resulting in hybrid organic/ inorganic filter modules. These hybrid filter modules were tested for the effective purification of water, by continuous filtration experiments, employing a variety of water pollutants. It has been established that polycyclic aromatic hydrocarbons (PAHs) can be removed very efficiently (more than 95%), and final concentrations of several ppb (microg/ L) are easily obtained. Representatives of the pollutant group of trihalogen methanes (THMs), monoaromatic hydrocarbons (BTX), and pesticides (simazine) can also be removed (>80%), although the filters are saturated considerably faster in these cases.
Harrison, Roy M.; Pio, Casimiro A.
Atmospheric aerosols were sampled with a high volume impactor/diffusion battery system and the collected fractions analysed for their major water-soluble inorganic constituents. Sulphate, nitrate and chloride showed bimodal distributions; sulphate and nitrate were mainly associated with NH 4+, having approximately log-normal distributions with modes at 1.0 μm. In unpolluted maritime air, chlorides appeared as salts of sodium and magnesium with average modes at c. 5 μm, whilst in polluted air masses significant concentrations of ammonium chloride sub-μm aerosols were detected. Sodium nitrate and sodium sulphate aerosols having average modes of c. 3.5 μm were observed in mixed maritime/polluted air masses. The dimensions of these particles indicate formation from absorption of H 2SO 4 and HNO 3 at the surface of marine NaCl particles. The concentration of H + was very low, but the possibility of its neutralization by atmospheric ammonia during sampling was ruled out by parallel air sampling using an 'ammonia denuder'.
Guidelines for determining inputs of inorganic contaminants into estuaries
International Nuclear Information System (INIS)
1987-01-01
This publication describes sampling and sample preparation procedures suitable to obtain unpolluted samples for the purpose of determining river inputs of inorganic pollutants into estuaries. Emphasis is placed on heavy metal pollutants but procedures are suitable, with appropriate modifications for other inorganic pollutants. For example, the collection of samples for mercury may require modifications of handling procedures. River water samples are collected at the most down-river point where no estuarine influences effect results. Samples are collected using a peristaltic pump and separated into aqueous and particulate phases for pollutant analysis. As is the case of all trace pollutant analyses, meticulous care is required to prevent pollution of the sample and in addition to the precautions described in this method, great personal attention is required to minimize sample handling, pollution by smoke, hands, hair, dust, talc from gloves, etc., and to avoid all contact of the samples and reagents with skin and metallic objects. 1 ref., 3 figs, 1 tab
Zhu, Xiaolin; Wu, Guanlan; Lu, Nan; Yuan, Xing; Li, Baikun
2017-02-15
The study presented a sensitive and miniaturized cell-based electrochemical biosensor to assess the toxicity of priority pollutants in the aquatic environment. Human hepatoma (HepG2) cells were used as the biological recognition agent to measure the changes of electrochemical signals and reflect the cell viability. The graphene oxide quantum dots/carboxylated carbon nanotubes hybrid was developed in a facile and green way. Based on the hybrid composite modified pencil graphite electrode, the cell culture and detection vessel was miniaturized to a 96-well plate instead of the traditional culture dish. In addition, three sensitive electrochemical signals attributed to guanine/xanthine, adenine, and hypoxanthine were detected simultaneously. The biosensor was used to evaluate the toxicity of six priority pollutants, including Cd, Hg, Pb, 2,4-dinitrophenol, 2,4,6-trichlorophenol, and pentachlorophenol. The 24h IC 50 values obtained by the electrochemical biosensor were lower than those of conventional MTT assay, suggesting the enhanced sensitivity of the electrochemical assay towards heavy metals and phenols. This platform enables the label-free and sensitive detection of cell physiological status with multi-parameters and constitutes a promising approach for toxicity detection of pollutants. It makes possible for automatical and high-throughput analysis on nucleotide catabolism, which may be critical for life science and toxicology. Copyright © 2016 Elsevier B.V. All rights reserved.
PRIORITIES OF REGIONAL ENVIRONMENTAL POLICY: THE ISSUES OF DIAGNOSTICS
Directory of Open Access Journals (Sweden)
T. I. Kudryavtseva
2010-03-01
Full Text Available Methods of eliciting priority ecological problems are analyzed in the article. The problem of air pollution is considered to be the foreground issue for both the Ural Federal District and Russia; that was due substantiated. An extended technique of setting priorities for air pollutants and techniques for integral ecological and social assessment of air pollution acuteness extent in the region have been offered; calculations for the Ural Federal District have been made according to the techniques mentioned.
Williamson, K.S.; Petty, J.D.; Huckins, J.N.; Lebo, J.A.; Kaiser, E.M.
2002-01-01
High performance liquid chromatography coupled with programmable fluorescence detection was employed for the determination of 15 priority pollutant polycyclic aromatic hydrocarbons (PPPAHs) in water, sediment, and semipermeable membrane devices (SPMDs). Chromatographic separation using this analytical method facilitates selectivity, sensitivity (ppt levels), and can serve as a non-destructive technique for subsequent analysis by other chromatographic and spectroscopic techniques. Extraction and sample cleanup procedures were also developed for water, sediment, and SPMDs using various chromatographic and wet chemical methods. The focus of this publication is to examine the enrichment techniques and the analytical methodologies used in the isolation, characterization, and quantitation of 15 PPPAHs in different sample matrices.
Effects of pollution on freshwater fish
International Nuclear Information System (INIS)
McKim, J.M.; Christensen, G.M.; Tucker, J.H.; Benoit, D.A.; Lewis, M.J.
1974-01-01
Various aspects of pollution effects on fishes are reviewed under the following headings: methodology; water quality; pesticide pollutants; industrial pollutants; domestic pollutants; radioactive pollutants; and other pollutants. A table is presented to show acute and chronic toxicity of inorganic and organic pollutants to freshwater fish. (U.S.)
Occurrence of priority organic pollutants in the fertilizers, China.
Mo, Ce-Hui; Cai, Quan-Ying; Li, Yun-Hui; Zeng, Qiao-Yun
2008-04-15
The use of large quantities of chemical fertilizers is usually associated with environmental problems. A lot of work has been done on the concentrations of heavy metals and radionuclides in chemical fertilizers, but little work has focused on the occurrence of semi-volatile organic compounds (SVOCs). In this study the occurrence of 43 SVOCs listed as priority pollutants in 22 widely used-fertilizers of China was determined by gas chromatography coupled with mass spectrometry. Twenty-six SVOCs were detected with different detection frequencies and concentrations. The most abundant compounds were phthalic acid esters (PAEs; ranging from 1.17 to 2795 microg kg(-1) dry weight, d.w.) and nitroaromatics (up to 9765 microg kg(-1) d.w.), followed by polycyclic aromatic hydrocarbons (PAHs; fertilizers, and the total concentrations of each class of contaminants varied widely, too. The highest levels of sum concentration for 16 PAHs, for 6 PAEs and for nitroaromatics were found in organic fertilizer containing pesticide and soil amendments. Concentrations of SVOCs in coated fertilizers (the controlled release fertilizer with coating) were considerably higher than those in the corresponding fertilizers without coating. The occurrence frequencies of SVOCs in the straight fertilizers (containing only one of the major plant nutrients) were lower than in the other fertilizers.
Effects of pollution on freshwater fish
International Nuclear Information System (INIS)
McKim, J.M.; Anderson, R.L.; Benoit, D.A.; Spehar, R.L.; Stokes, G.N.
1976-01-01
Studies of the effects of pollution on freshwater fish are reviewed. Subjects include: inorganic industrial pollutants, man-made disturbances and radioactive pollutants. Topics include uptake distribution, retention, mortality, and lethal doses
International Nuclear Information System (INIS)
Lacorte, Silvia; Raldua, Demetrio; Martinez, Elena; Navarro, Alicia; Diez, Sergi; Bayona, Josep M.; Barcelo, Damia
2006-01-01
Priority organic pollutants were investigated in sediments and fish collected along the Ebro river basin (NE Spain) to evaluate their occurrence, transport and bioavailability. Sediments were collected in 18 sites and two species of fish were captured in nine sites according to the availability in each area. The sampling sites covered industrial, urban and agricultural areas. Four methods were used to detect 20 organochlorine compounds (OCs), 8 polycyclic aromatic hydrocarbons, 3 organotin compounds, 2 alkylphenols and 40 polybrominated diphenyl ethers (PBDEs) from purified extracts. The contamination pattern was site specific and no downstream increase in concentration of pollutants was observed but rather a generalized low level diffuse pollution. Target compounds were detected in sediments at 0.01 to 2331 μg/kg dry weight, and only OCs and PBDEs were accumulated in benthopelagic fish. Toxicological assessment was performed according to predicted environmental levels and revealed sites where adverse effects could occur. - Organic pollutants were monitored in sediments and fish from the Ebro river basin (NE Spain)
Bytnerowicz, A.; Fenn, M. E.; Fraczek, W.; Johnson, R.; Allen, E. B.
2013-12-01
Dry deposition of gaseous inorganic nitrogenous (N) air pollutants plays an important role in total atmospheric N deposition and its ecological effects in the arid and semi-arid ecosystems. Passive samplers and denuder/ filter pack systems have been used for determining ambient concentrations of ammonia (NH3), nitric oxide (NO), nitrogen dioxide (NO2), and nitric acid vapor (HNO3) in the topographically complex remote areas of the western United States and Canada. Concentrations of the measured pollutants varied significantly between the monitoring areas. Highest NH3, NO2 and HNO3 levels occurred in southern California areas downwind of the Los Angeles Basin and in the western Sierra Nevada impacted by emissions from the California Central Valley and the San Francisco Bay area. Strong spatial gradients of N pollutants were also present in southeastern Alaska due to cruise ship emissions and in the Athabasca Oil Sands Region in Canada affected by oil exploitation. Distribution of these pollutants has been depicted by maps generated by several geostatistical methodologies within the ArcGIS Geostatistical Analyst (ESRI, USA). Such maps help to understand spatial and temporal changes of air pollutants caused by various anthropogenic activities and locally-generated vs. long range-transported air pollutants. Pollution distribution maps for individual N species and gaseous inorganic reactive nitrogen (Nr) have been developed for the southern portion of the Sierra Nevada, Lake Tahoe Basin, San Bernardino Mountains, Joshua Tree National Park and the Athabasca Oil Sands Region. The N air pollution data have been utilized for estimates of dry and total N deposition by a GIS-based inferential method specifically developed for understanding potential ecological impacts in arid and semi-arid areas. The method is based on spatial and temporal distribution of concentrations of major drivers of N dry deposition, their surface deposition velocities and stomatal conductance values
Inorganic Constituents in Coal
Directory of Open Access Journals (Sweden)
Rađenović A.
2006-02-01
Full Text Available Coal contains not only organic matter but also small amounts of inorganic constituents. More thanone hundred different minerals and virtually every element in the periodic table have been foundin coal. Commonly found group minerals in coal are: major (quartz, pyrite, clays and carbonates,minor, and trace minerals. Coal includes a lot of elements of low mass fraction of the orderof w=0.01 or 0.001 %. They are trace elements connected with organic matter or minerals comprisedin coal. The fractions of trace elements usually decrease when the rank of coal increases.Fractions of the inorganic elements are different, depending on the coal bed and basin. A varietyof analytical methods and techniques can be used to determine the mass fractions, mode ofoccurrence, and distribution of organic constituents in coal. There are many different instrumentalmethods for analysis of coal and coal products but atomic absorption spectroscopy – AAS is theone most commonly used. Fraction and mode of occurrence are one of the main factors that haveinfluence on transformation and separation of inorganic constituents during coal conversion.Coal, as an important world energy source and component for non-fuels usage, will be continuouslyand widely used in the future due to its relatively abundant reserves. However, there is aconflict between the requirements for increased use of coal on the one hand and less pollution onthe other. It’s known that the environmental impacts, due to either coal mining or coal usage, canbe: air, water and land pollution. Although, minor components, inorganic constituents can exert asignificant influence on the economic value, utilization, and environmental impact of the coal.
DEFF Research Database (Denmark)
Ren, Jingzheng
2016-01-01
…THE POLITICAL LEADERS of the local government of Chongqing, China, vigorously promote a low-carbon economy and sustainable development to mitigate environmental pollution. Accordingly, research grants focused on this issue were supported by the government, and our group obtained a grant for a pr......…THE POLITICAL LEADERS of the local government of Chongqing, China, vigorously promote a low-carbon economy and sustainable development to mitigate environmental pollution. Accordingly, research grants focused on this issue were supported by the government, and our group obtained a grant...... for a project about industrial park planning and design.…In my view, political priorities based on correct decision-making and market requirements are beneficial for researchers....
International Nuclear Information System (INIS)
1989-01-01
The IOC-UNEP Regional Workshop to Review Priorities for Marine Pollution Monitoring, Research, Control and Abatement in the Wider Caribbean Region (San Jose, 24-30 August 1989) examined a possible general framework for a regionally co-ordinated comprehensive joint IOC/UNEP programme for marine pollution assessment and control in the Wider Caribbean region (CEPPOL). The overall objective of CEPPOL is to establish a regionally co-ordinated comprehensive joint IOC/UNEP Marine Pollution Assessment and Control Programme catering to the immediate and long-term requirements of the Cartagena Convention as well as the requirements of the member States of IOCARIBE. The specific objectives of the programmes are: (i) To organize and carry out a regionally co-ordinated marine pollution monitoring and research programme concentrating on contaminants and pollutants affecting the quality of the marine and coastal environment, as well as the human health in the Wider Caribbean and to interpret/assess the results of the programme as part of the scientific basis for the region; (ii) To generate information on the sources, levels, amounts, trends and effects of marine pollution within the Wider Caribbean region as an additional component of the scientific basis upon which the formulation of proposals for preventive and remedial actions can be based; (iii) To formulate proposals for technical, administrative and legal pollution control, abatement, and preventive measures and to assist the Governments in the region in implementing and evaluating their effectiveness; and (iv) To strengthen and , when necessary, to develop/establish the capabilities of national institutions to carry out marine pollution monitoring and research, as well as to formulate and apply pollution control and abatement measures
Energy Technology Data Exchange (ETDEWEB)
Zhu, Xiaolin; Wu, Guanlan; Lu, Nan [School of Environment, Northeast Normal University, Changchun 130117 (China); Yuan, Xing, E-mail: yuanx@nenu.edu.cn [School of Environment, Northeast Normal University, Changchun 130117 (China); Li, Baikun, E-mail: baikun@engr.uconn.edu [Department of Civil and Environmental Engineering, University of Connecticut, Storrs, CT 06269 (United States)
2017-02-15
Highlights: • Graphene oxide quantum dots/carboxylated carbon nanotubes hybrid was developed. • The cytotoxicity detection vessel was miniaturized to the 96-well plate. • The electrochemical behavior of HepG2 cell was investigated for the first time. • The mixture signal of adenine and hypoxanthine was separated successfully. • The biosensor was used to assess the toxicity of heavy metals and phenols. - Abstract: The study presented a sensitive and miniaturized cell-based electrochemical biosensor to assess the toxicity of priority pollutants in the aquatic environment. Human hepatoma (HepG2) cells were used as the biological recognition agent to measure the changes of electrochemical signals and reflect the cell viability. The graphene oxide quantum dots/carboxylated carbon nanotubes hybrid was developed in a facile and green way. Based on the hybrid composite modified pencil graphite electrode, the cell culture and detection vessel was miniaturized to a 96-well plate instead of the traditional culture dish. In addition, three sensitive electrochemical signals attributed to guanine/xanthine, adenine, and hypoxanthine were detected simultaneously. The biosensor was used to evaluate the toxicity of six priority pollutants, including Cd, Hg, Pb, 2,4-dinitrophenol, 2,4,6-trichlorophenol, and pentachlorophenol. The 24 h IC{sub 50} values obtained by the electrochemical biosensor were lower than those of conventional MTT assay, suggesting the enhanced sensitivity of the electrochemical assay towards heavy metals and phenols. This platform enables the label-free and sensitive detection of cell physiological status with multi-parameters and constitutes a promising approach for toxicity detection of pollutants. It makes possible for automatical and high-throughput analysis on nucleotide catabolism, which may be critical for life science and toxicology.
Occurrence of priority organic pollutants in the fertilizers, China
International Nuclear Information System (INIS)
Mo Cehui; Cai Quanying; Li Yunhui; Zeng Qiaoyun
2008-01-01
The use of large quantities of chemical fertilizers is usually associated with environmental problems. A lot of work has been done on the concentrations of heavy metals and radionuclides in chemical fertilizers, but little work has focused on the occurrence of semi-volatile organic compounds (SVOCs). In this study the occurrence of 43 SVOCs listed as priority pollutants in 22 widely used-fertilizers of China was determined by gas chromatography coupled with mass spectrometry. Twenty-six SVOCs were detected with different detection frequencies and concentrations. The most abundant compounds were phthalic acid esters (PAEs; ranging from 1.17 to 2795 μg kg -1 dry weight, d.w.) and nitroaromatics (up to 9765 μg kg -1 d.w.), followed by polycyclic aromatic hydrocarbons (PAHs; -1 d.w.) and halogenated hydrocarbons ( -1 d.w.). Chlorobenzenes and haloethers occurred generally at low concentrations. There are large variations in concentrations of various compounds in different fertilizers, and the total concentrations of each class of contaminants varied widely, too. The highest levels of sum concentration for 16 PAHs, for 6 PAEs and for nitroaromatics were found in organic fertilizer containing pesticide and soil amendments. Concentrations of SVOCs in coated fertilizers (the controlled release fertilizer with coating) were considerably higher than those in the corresponding fertilizers without coating. The occurrence frequencies of SVOCs in the straight fertilizers (containing only one of the major plant nutrients) were lower than in the other fertilizers
Energy Technology Data Exchange (ETDEWEB)
Marin Galvin, R.; Ripolles Pascual, F.; Santateresa Forcada, E.; Lahora Cano, A.; Mantecon Pascual, R.; Rodriguez Amaro, R.
2009-07-01
Spanish's waste water shoes a conventional pollution, and increased DQO values. Contains several organic and inorganic compounds. For domestic wastewater this situation imply to apply measures of control from the origin and another of environmental education. While WWTP investigated obtain high yielding in treatment of metals, HPA, VOC and alquilphenols, the behaviour versus plaguicides, thin-organic compounds and other organic is more un-favourable. Several substances overpasses the values established in the E-PRTR normative, so in the next future could be experience problems to fulfil the normative about this subject, as well as those related to reuse of treated wastewater and bio-solids generated in the WWP. (Author) 9 refs.
Pan, Lin-Men; Huang, Min-Yan; Guo, Li-Wei
2012-11-01
To study the measures for preventing and controlling the pollution of aqueous extract of Astragali Radix proceeded with inorganic ceramic membrane micro-filtration, in order to find effective measures for preventing and controlling the membrane pollution. The resistance distribution, polymer removal and changes in physical and chemical parameters of the zirconium oxide film of different pore diameters were determined to analyze the state or location of pollutants as well as the regularity of formation. Meanwhile, recoil and ultrasonic physical measures were adopted to strengthen the membrane process, in order to explore the methods for preventing and controlling the membrane pollution. When 0.2 microm of ZrO2 micro-filtrated aqueous extract of Astragali Radix, the rate of pollution was as high as 44.9%. The hole blocking resistance and the concentration polarization resistance were the main filtration resistances, while the surface deposit resistance decreased with the increase in the membrane's hold diameter; after micro-filtration, the liquid turbidity significantly reduced, with slight changes in both pH and viscosity. The 0.2 microm ZrO2 micro-filtration membrane performed better than the 0.05 microm pore size membrane in terms of conductivity. The 0. 2 microm and 0.05 microm pore diameter membranes showed better performance in the removal of pectin. The ultrasonic measure to strengthen membranes is more suitable to this system, with a flux rate up by 41.7%. The membrane optimization process adopts appropriate measures for preventing and controlling the membrane pollution, in order to reduce the membrane pollution, recover membrane performance and increase filtration efficiency.
Alonso, Álvaro; Figueroa, Ricardo; Castro-Díez, Pilar
2017-05-01
The water demand for human activities is rapidly increasing in developing countries. Under these circumstances, preserving aquatic ecosystems should be a priority which requires the development of quality criteria. In this study we perform a preliminary prioritization of the risky substances based on reported ecotoxicological studies and guidelines for the Biobío watershed (Central Chile). Our specific aims are (1) reviewing the scientific information on the aquatic pollution of this watershed, (2) determining the presence and concentration of potential toxic substances in water, sediment and effluents, (3) searching for quality criteria developed by other countries for the selected substances and (4) prioritizing the most risky substances by means of deterministic ecotoxicological risk assessment. We found that paper and mill industries were the main sources of point pollution, while forestry and agriculture were mostly responsible for non-point pollution. The most risky organic substances in the water column were pentachlorophenol and heptachlor, while the most relevant inorganic ones were aluminum, copper, unionized ammonia and mercury. The most risky organic and inorganic substances in the sediment were phenanthrene and mercury, respectively. Our review highlights that an important effort has been done to monitor pollution in the Biobío watershed. However there are emerging pollutants and banned compounds—especially in sediments—that require to be monitored. We suggest that site-specific water quality criteria and sediment quality criteria should be developed for the Biobío watershed, considering the toxicity of mixtures of chemicals to endemic species, and the high natural background level of aluminum in the Biobío.
International Nuclear Information System (INIS)
Calvo Munoz, Maria Luisa
2000-01-01
As mono-cyclic aromatic hydrocarbons (MAH) are a matter of concern in terms of pollution, and are to be monitored due to new regulations regarding air quality control, this research thesis first aims at explaining why these compounds are to be monitored, at recalling their sources, at outlining what we know about their negative impact on health and how this impact is determined, which are the means implemented to monitor these compounds and which are their drawbacks, and at recalling which requirements are defined by European directives. The author then reports a literature survey of the current technology regarding chemical sensors, and identifies the required characteristics of an ideal sensor. The author proposes a review of studied performed on sol-gel process and of inorganic polymer synthesis methods based on sol-gel process. He reports the synthesis and characterization of inorganic or hybrid organic-inorganic host matrices, monolithic or in thin layers, used to produce MAH sensors. A matrix pore local polarity study is reported. Benzene and toluene trapping is studied with respect to the polarity and thickness of the host matrix. Pollutant trapping is directly monitored by their absorption in the near-UV and visible range. The author finally reports the study of interactions between fluorescent probe molecules and pollutants, as well as the effect of an interfering gas (oxygen) on the fluorescence of probe molecules [fr
A review of soil heavy metal pollution from mines in China: pollution and health risk assessment.
Li, Zhiyuan; Ma, Zongwei; van der Kuijp, Tsering Jan; Yuan, Zengwei; Huang, Lei
2014-01-15
Heavy metal pollution has pervaded many parts of the world, especially developing countries such as China. This review summarizes available data in the literature (2005-2012) on heavy metal polluted soils originating from mining areas in China. Based on these obtained data, this paper then evaluates the soil pollution levels of these collected mines and quantifies the risks these pollutants pose to human health. To assess these potential threat levels, the geoaccumulation index was applied, along with the US Environmental Protection Agency (USEPA) recommended method for health risk assessment. The results demonstrate not only the severity of heavy metal pollution from the examined mines, but also the high carcinogenic and non-carcinogenic risks that soil heavy metal pollution poses to the public, especially to children and those living in the vicinity of heavily polluted mining areas. In order to provide key management targets for relevant government agencies, based on the results of the pollution and health risk assessments, Cd, Pb, Cu, Zn, Hg, As, and Ni are selected as the priority control heavy metals; tungsten, manganese, lead-zinc, and antimony mines are selected as the priority control mine categories; and southern provinces and Liaoning province are selected as the priority control provinces. This review, therefore, provides a comprehensive assessment of soil heavy metal pollution derived from mines in China, while identifying policy recommendations for pollution mitigation and environmental management of these mines. © 2013.
ORIGINAL ARTICLES Cost-effectiveness analysis for priority-setting ...
African Journals Online (AJOL)
health outcomes and wasted resources.4-5 It was found that the cost- effectiveness of South ... Priorities for Developing Countries Project was that emergency (and even some elective) ... to control air pollutants found that in South Africa the most cost- effective ..... outdoor air pollution in South Africa in 2000. S Afr Med J ...
Zgheib, S; Moilleron, R; Chebbo, G
2011-01-01
This paper presents the results of the concentrations (μg/L) and fluxes (g/ha) of priority substances in stormwater from three watersheds with different land use patterns (namely, residential, urban dense, high urban density). Samples were collected at the outlet of these watersheds. Thirteen chemical groups were investigated corresponding to 88 individual substances before treatment. Results showed that stormwater discharges contained 55 substances, among them some metals, organotins, PAHs, PCBs, alkylphenols, pesticides, phthalates, cholorophenols and volatile organic compounds. Therefore, stormwater was highly contaminated. However, this contamination was often comparable from site to site, since no significant difference of the pollutant load was observed between the land use patterns.
Energy Technology Data Exchange (ETDEWEB)
Benz, T; Hampp, R; Horsch, F; Filby, G; Fund, N; Gross, S; Hanisch, B; Kilz, E; Seidel, A [comps.
1986-04-01
Levels of adenine nucleotides (ATP, ADP, AMP) and of inorganic phosphate in needles of Picea abies, representing different stages of development and of pollution dependence. Lyophilized needles of Picea abies (Kaelbelescheuer, southern Black Forest) were analyzed for their content of adenine nucleotides (ATP, ADP, AMP: AdN) and of inorganic phosphate (Psub(i)). The metabolite levels were related to needle age, vegetation period and degree of damage (chlorophyll content). The results were as follows: 1) With increasing needle age there is a general decrease in the total AdN-pool. This decrease is most pronounced in very young needles and occurs in both healthy and damaged tissue. 2) The ATP/ADP-ratio of damaged needle is significantly higher than that of healthy ones. 3) Both phosphorylation potential (ATP.(ADP.Psub(i))/sup -1/) and adenylate energy charge ((ATP + 0.5.ADP).(AdN)/sup -1/) are significantly reduced in damaged needles. This is due to relatively higher levels of Psub(i) and of AMP. The results, although incomplete and preliminary, indicate metabolic alterations which have been described for other tissues in response to pollution by photooxidants.
International Nuclear Information System (INIS)
Thakur, Suman; Karak, Niranjan
2014-01-01
An environmentally friendly effective technique was demonstrated to prepare iron oxide/reduced graphene oxide nanohybrid (IO/RGO) at room temperature by using banana peel ash aqueous extract as the base source and Colocasia esculenta leaves aqueous extract as the reducing agent. The nanohybrid was characterized by Fourier transform infrared spectroscopy, X-ray diffractometry, transmission electron microscopy, vibrating sample magnetometry, Raman spectroscopy and thermal studies. The results indicated the decoration of superparamagnetic IO nanoparticles on the surface of the RGO. Both organic and inorganic pollutants were effectively removed from the contaminated water (for Pb 2+ and Cd 2+ within 10 min, whereas for tetrabromobisphenol A within 30 min) by IO/RGO. The study revealed that adsorption followed pseudo-second order kinetics and isotherms were well described by the Langmuir model in all the cases. The thermodynamics parameters (ΔG°, ΔS° and ΔH°) were calculated from the temperature dependent isotherms and indicated that the adsorptions were endothermic and spontaneous. - Highlights: • Eco-friendly one step preparation of iron oxide/reduced graphene oxide nanohybrid. • The nanohybrid has excellent pollutants removal capacity from contaminated water. • Superparamagnetic iron oxide nanoparticles help in easy recycle. • The adsorption processes of pollutants are endothermic and spontaneous
Energy Technology Data Exchange (ETDEWEB)
Thakur, Suman; Karak, Niranjan, E-mail: karakniranjan@yahoo.com
2014-04-01
An environmentally friendly effective technique was demonstrated to prepare iron oxide/reduced graphene oxide nanohybrid (IO/RGO) at room temperature by using banana peel ash aqueous extract as the base source and Colocasia esculenta leaves aqueous extract as the reducing agent. The nanohybrid was characterized by Fourier transform infrared spectroscopy, X-ray diffractometry, transmission electron microscopy, vibrating sample magnetometry, Raman spectroscopy and thermal studies. The results indicated the decoration of superparamagnetic IO nanoparticles on the surface of the RGO. Both organic and inorganic pollutants were effectively removed from the contaminated water (for Pb{sup 2+} and Cd{sup 2+} within 10 min, whereas for tetrabromobisphenol A within 30 min) by IO/RGO. The study revealed that adsorption followed pseudo-second order kinetics and isotherms were well described by the Langmuir model in all the cases. The thermodynamics parameters (ΔG°, ΔS° and ΔH°) were calculated from the temperature dependent isotherms and indicated that the adsorptions were endothermic and spontaneous. - Highlights: • Eco-friendly one step preparation of iron oxide/reduced graphene oxide nanohybrid. • The nanohybrid has excellent pollutants removal capacity from contaminated water. • Superparamagnetic iron oxide nanoparticles help in easy recycle. • The adsorption processes of pollutants are endothermic and spontaneous.
Roebeling, P C; Rocha, J; Nunes, J P; Fidélis, T; Alves, H; Fonseca, S
2014-01-01
Coastal aquatic ecosystems are increasingly affected by diffuse source nutrient water pollution from agricultural activities in coastal catchments, even though these ecosystems are important from a social, environmental and economic perspective. To warrant sustainable economic development of coastal regions, we need to balance marginal costs from coastal catchment water pollution abatement and associated marginal benefits from coastal resource appreciation. Diffuse-source water pollution abatement costs across agricultural sectors are not easily determined given the spatial heterogeneity in biophysical and agro-ecological conditions as well as the available range of best agricultural practices (BAPs) for water quality improvement. We demonstrate how the Soil and Water Assessment Tool (SWAT) can be used to estimate diffuse-source water pollution abatement cost functions across agricultural land use categories based on a stepwise adoption of identified BAPs for water quality improvement and corresponding SWAT-based estimates for agricultural production, agricultural incomes, and water pollution deliveries. Results for the case of dissolved inorganic nitrogen (DIN) surface water pollution by the key agricultural land use categories ("annual crops," "vineyards," and "mixed annual crops & vineyards") in the Vouga catchment in central Portugal show that no win-win agricultural practices are available within the assessed BAPs for DIN water quality improvement. Estimated abatement costs increase quadratically in the rate of water pollution abatement, with largest abatement costs for the "mixed annual crops & vineyards" land use category (between 41,900 and 51,900 € tDIN yr) and fairly similar abatement costs across the "vineyards" and "annual crops" land use categories (between 7300 and 15,200 € tDIN yr). Copyright © by the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America, Inc.
Exploring Citizen Infrastructure and Environmental Priorities in Mumbai, India
Energy Technology Data Exchange (ETDEWEB)
Sperling, Joshua; Romero-Lankao, Patricia; Beig, Gufran
2016-06-01
Many cities worldwide seek to understand local policy priorities among their general populations. This study explores how differences in local conditions and among citizens within and across Mumbai, India shape local infrastructure (e.g. energy, water, transport) and environmental (e.g. managing pollution, climate-related extreme weather events) policy priorities for change that may or may not be aligned with local government action or global environmental sustainability concerns such as low-carbon development. In this rapidly urbanizing city, multiple issues compete for prominence, ranging from improved management of pollution and extreme weather to energy and other infrastructure services. To inform a broader perspective of policy priorities for urban development and risk mitigation, a survey was conducted among over 1200 citizens. The survey explored the state of local conditions, the challenges citizens face, and the ways in which differences in local conditions (socio-institutional, infrastructure, and health-related) demonstrate inequities and influence how citizens perceive risks and rank priorities for the future design and implementation of local planning, policy, and community-based efforts. With growing discussion and tensions surrounding the new urban sustainable development goal, announced by the UN in late September 2015, and a new global urban agenda document to be agreed upon at 'Habitat III', issues on whether sustainable urbanization priorities should be set at the international, national or local level remain controversial. As such, this study aims to first understand determinants of and variations in local priorities across one city, with implications discussed for local-to-global urban sustainability. Findings from survey results indicate the determinants and variation in conditions such as age, assets, levels of participation in residential action groups, the health outcome of chronic asthma, and the infrastructure service of piped
García-Sánchez, Mercedes; Klouza, Martin; Holečková, Zlata; Tlustoš, Pavel; Száková, Jiřina
2016-07-01
On the basis of a previous study performed in our laboratory, the use of organic and inorganic amendments can significantly modify the Hg mobility in soil. We have compared the effectiveness of organic and inorganic amendments such as digestate and fly ash, respectively, reducing the Hg mobility in Chernozem and Luvisol soils differing in their physicochemical properties. Hence, the aim of this work was to compare the impact of digestate and fly ash application on the chemical and biochemical parameters in these two mercury-contaminated soils in a model batch experiment. Chernozem and Luvisol soils were artificially contaminated with Hg and then incubated under controlled conditions for 21 days. Digestate and fly ash were applied to both soils in a dose of 10 and 1.5 %, respectively, and soil samples were collected after 1, 7, 14, and 21 days of incubation. The presence of Hg in both soils negatively affected to processes such as nitrification, provoked a decline in the soil microbial biomass C (soil microbial biomass C (MBC)), and the microbial activities (arylsulfatase, and β-glucosaminidase) in both soils. Meanwhile, the digestate addition to Chernozem and Luvisol soils contaminated with Hg improved the soil chemical properties (pH, dissolved organic carbon (DOC), N (Ntot), inorganic-N forms (N-NH4 (+) and N-NO3 (-))), as consequence of high content in C and N contained in digestate. Likewise, the soil MBC and soil microbial activities (dehydrogenase, arylsulfatase, and β-glucosaminidase) were greatly enhanced by the digestate application in both soils. In contrast, fly ash application did not have a remarkable positive effect when compared to digestate in Chernozem and Luvisol soil contaminated with mercury. These results may indicate that the use of organic amendments such as digestate considerably improved the soil health in Chernozem and Luvisol compared with fly ash, alleviating the detrimental impact of Hg. Probably, the chemical properties present in
Iodine-129 in Seawater Offshore Fukushima: distribution, inorganic speciation, sources, and budget
DEFF Research Database (Denmark)
Hou, Xiaolin; Povinec, Pavel P.; Zhang, Luyuan
2013-01-01
The Fukushima nuclear accident in March 2011 has released a large amount of radioactive pollutants to the environment. Of the pollutants, iodine-129 is a long-lived radionuclide and will remain in the environment for millions of years. This work first report levels and inorganic speciation of 129...
International Nuclear Information System (INIS)
Shah, A. B.; Singh, R. P.
2016-01-01
River water is not only an indispensable source for irrigation but also plays a vital role for drinking water supply for most of the urban municipalities. Water from rivers is pumped at specific sites and after treatment at municipal water treatment plants supplied as domestic potable water supply. The present study was undertaken to assess the suitability of Gomti river water at Gaughat being used as the source of water supply for Lucknow city and to evaluate post-treatment potable water quality at the consumer end by monitoring the levels of inorganic pollutants (nitrate, nitrite, ammonium and phosphate) and heavy metals. Municipal water supply at Gaughat showed marked variations in the levels of p H (7.13-8.63) and electrical conductivity (375.66-571.67μS/cm). The amount of nitrate, nitrite, ammonium and phosphate was observed 26.25, 0.082, 6.9 and 1.82 mg/l respectively at Gaughat. Also, the levels of heavy metals in the municipal water source at Gaughat varied significantly for Fe (0.33-1.65 mg/l), Cu (0.077-0.108 mg/l), Cd (0.03-0.052 mg/l), Pb (0.68-0.96 mg/l) and Cr (0.036-0.065 mg/l). Water at the user end was also contaminated as the concentration of analysed inorganic pollutants and heavy metals were correspondingly higher than observed at the source. While comparing potable water at the user end of Lucknow municipality with the BIS (Drinking Water Specifications) and WHO standards for drinking water, the concentration of all studied heavy metals and other inorganic contaminants were much above the permissible levels, thus posing a serious threat to the public health.
Stormwater Priority Pollutants Versus Surface Water Quality Criteria
DEFF Research Database (Denmark)
Eriksson, Eva; Ledin, Anna; Baun, Anders
2011-01-01
Stormwater in urban areas comprises of a substantial part of the urban water cycle, dominating the flow in many small urban streams, and the pollution levels are sizeable. No stormwater quality criteria were found here and no European or national emission limit values exist. Stormwater pollutants...... however are present in levels exceeding most of the regulated surface water quality criteria and environmental quality standards. Therefore catchment characterisation is needed to chose suitable treatment prior to discharge into receiving surface waters, as the mixing may be insufficient in small streams....
Yang, Qianqi; Li, Zhiyuan; Lu, Xiaoning; Duan, Qiannan; Huang, Lei; Bi, Jun
2018-06-14
Soil heavy metal pollution has been becoming serious and widespread in China. To date, there are few studies assessing the nationwide soil heavy metal pollution induced by industrial and agricultural activities in China. This review obtained heavy metal concentrations in soils of 402 industrial sites and 1041 agricultural sites in China throughout the document retrieval. Based on the database, this review assessed soil heavy metal concentration and estimated the ecological and health risks on a national scale. The results revealed that heavy metal pollution and associated risks posed by cadmium (Cd), lead (Pb) and arsenic (As) are more serious. Besides, heavy metal pollution and associated risks in industrial regions are severer than those in agricultural regions, meanwhile, those in southeast China are severer than those in northwest China. It is worth noting that children are more likely to be affected by heavy metal pollution than adults. Based on the assessment results, Cd, Pb and As are determined as the priority control heavy metals; mining areas are the priority control areas compared to other areas in industrial regions; food crop plantations are the priority control areas in agricultural regions; and children are determined as the priority protection population group. This paper provides a comprehensive ecological and health risk assessment on the heavy metals in soils in Chinese industrial and agricultural regions and thus provides insights for the policymakers regarding exposure reduction and management. Copyright © 2018. Published by Elsevier B.V.
Liu, Zi-Rui; Wang, Yue-Si; Liu, Quan; Liu, Lu-Ning; Zhang, De-Qiang
2011-11-01
Real-time measurements of PM2.5, secondary inorganic compounds in PM2.5 (SO4(2-), NH4(+), and NO3(-)) and related gaseous pollutants were conducted at Mount Dinghu, a regional background station of the Pearl River Delta (PRD), in October and November 2008 by using a conventional R&P TEOM and a system of rapid collection of fine particles and ion chromatography (RCFP-IC). Sources and transportation of atmospheric particles during the experiment were discussed with principal component analysis and backward trajectories calculated using HYSPLIT model. The average daily mass concentrations of PM2.5 were 76.9 microg x m(-3) during sampling period, and average daily mass concentrations of SO4(2-), NH4(+), and NO3(-) were 20.0 microg x m(-3), 6.8 microg x m(-3) and 2.6 microg x m(-3), respectively. The sum of these three secondary inorganic compounds accounted for more than one third of the PM2.5 mass concentration, which had become the major source of atmospheric fine particles at Mount Dinghu. The diurnal variation of PM2.5, SO4(2-), and NH4(+) all showed a "bimodal" distribution with two peaks appeared at 10:00 am and at 16:00 pm, respectively, whereas NO3(-s) howed "single peak" distribution peaked at 10:00 am. The mass concentrations of SO4(2-) in PM2.5 had the similar diurnal variation with that of SO2, SO4(2-) in PM2.5 was mainly transformed from SO2, whereas NO3(-) showed difference diurnal variation with that of NO2, and the second conversion rate of NO2 was far lower than that of SO2. NH4(+) in PM2.5 existed mainly in the form of sulfate, nitrate and chloride. Both of principal component analysis and back trajectory analysis showed that the variations of PM2.5 and secondary inorganic compounds at Mount Dinghu were mainly affected by the long-range transport air mass passed over Guangzhou, Huizhou and other highly industrialized areas which carried air pollutants to the observation site, at the same time local sulfate originated from secondary formation also
Camacho, María; Boada, Luis D; Orós, Jorge; López, Pedro; Zumbado, Manuel; Almeida-González, Maira; Luzardo, Octavio P
2014-05-15
Despite the current environmental concern regarding the risk posed by contamination in marine ecosystems, the concentrations of pollutants in sea turtles have not been thoroughly elucidated. In the current study, we determined the concentrations of 18 organochlorine pesticides (OCPs), 18 polychlorinated biphenyls (PCBs), 16 polycyclic aromatic hydrocarbons (PAHs) and 11 inorganic elements (Cu, Mn, Pb, Zn, Cd, Ni, Cr, As, Al, Hg and Se) for the first time in two sea turtle species (Chelonia mydas and Eretmochelys imbricata). Only five of the 18 analyzed OCPs were detected in both species. The average total OCP concentration was higher in green turtles than in hawksbills (0.33 ng/ml versus 0.20 ng/ml). Higher concentrations of individual congeners and total PCBs were also detected in green turtles than in hawksbills (∑PCBs=0.73ng/ml versus 0.19 ng/ml), and different PCB contamination profiles were observed in these two species. Concerning PAHs, we also observed a different contamination profile and higher levels of contamination in green turtles (∑PAHs=12.06 ng/ml versus 2.95 ng/ml). Di- and tri-cyclic PAHs were predominant in both populations, suggesting a petrogenic origin, rather than urban sources of PAHs. Additionally, all of the samples exhibited detectable levels of the 11 inorganic elements. In this case, we also observed relevant differences between both species. Thus, Zn was the most abundant inorganic element in hawksbills (an essential inorganic element), whereas Ni, a well-known toxicant, was the most abundant inorganic element in green turtles. The presence of contaminants is greater in green turtles relative to hawksbill turtles, suggesting a greater exposure to hazardous chemical contaminants for green turtles. These results provide baseline data for these species that can serve for future monitoring purposes outlined in the EU's Marine Strategy Framework Directive. Copyright © 2014 Elsevier B.V. All rights reserved.
Energy Technology Data Exchange (ETDEWEB)
Hayden, R. S.; Johnson, D. O.; Henricks, J. D.
1979-03-01
The report describes the procedures used by Argonne National Laboratory to sample surface coal mine effluents in order to obtain field and laboratory data on 110 organic compounds or classes of compounds and 14 metals and minerals that are known as priority pollutants, plus 5-day biochemical oxygen demand (BOD/sub 5/), total organic carbon (TOC), chemical oxygen demand (COD), total dissolved solids (TDS), and total suspended solids (TSS). Included are directions for preparation of sampling containers and equipment, methods of sampling and sample preservation, and field and laboratory protocols, including chain-of-custody procedures. Actual analytical procedures are not described, but their sources are referenced.
International Nuclear Information System (INIS)
Qureshi, I.H.
2001-01-01
Indoor air pollution is a potential risk to human health. Prolonged exposure to indoor pollutants may cause various infectious, allergic and other diseases. Indoor pollutants can emanate from a broad array of internal and external sources. Internal sources include building and furnishing materials, consumer and commercial products, office equipment, micro-organisms, pesticides and human occupants activities. External sources include soil, water supplies and outside makeup air. The main indoor air pollutants of concern are inorganic gases, formaldehyde and other volatile organic compounds, pesticides, radon and its daughters, particulates and microbes. The magnitude of human exposure to indoor pollutants can be estimated or predicted with the help of mathematical models which have been developed using the data from source emission testing and field monitoring of pollutants. In order to minimize human exposure to indoor pollutants, many countries have formulated guidelines / standards for the maximum permissible levels of main pollutants. Acceptable indoor air quality can be achieved by controlling indoor pollution sources and by effective ventilation system for removal of indoor pollutants. (author)
Scavenging of priority organic pollutants from aqueous waste using granular activated carbon
Energy Technology Data Exchange (ETDEWEB)
Singh, S.; Yenkie, M.K.N. [Central Fuel Research Institute, Nagpur (India)
2006-04-15
Many organic compounds present in industrial and domestic wastewaters are carcinogenic in nature. Removal of these organic compounds from wastewater has become a great challenge to wastewater treatment technologies, as many of them are non-biodegradable in nature. Adsorption on granular activated carbon (GAC) has emerged an efficient and economically viable technology for removal of final traces of a broad spectrum of toxic organic compounds from domestic and industrial wastewater. In the present investigation adsorption of some priority organic pollutants, namely phenol, o-cresol, p-nitrophenol, m-methoxyphenol, benzoic acid and salicylic acid on granular activated carbon, was studied in a batch system at laboratory scale. Experiments were carried out to determine adsorption isotherms and kinetics for adsorbate when present in aqueous solutions as single, bi- and tri-solute systems. The commercially available bituminous coal based granular activated carbon Filtrasorb 300 (F-300) was used as adsorbent. The results indicate that p-nitrophenol is most strongly adsorbed as compared to other phenols studied. Aqueous phase solubility of the adsorbate plays a deciding role in multi-component systems as more hydrophobic p-nitrophenol adsorbs to a greater extent than less hydrophobic phenol, o-cresol and m-methoxyphenol. The preferential adsorption of strongly adsorbable solute over a weakly adsorbable one has been observed, as the solutes are competing for the available surface area of the adsorbent for adsorption.
International Nuclear Information System (INIS)
Schulz, H.; Huhn, G.; Schuermann, G.; Popp, P.; Staerk, H.J.
2000-01-01
Scots pine (Pinus sylvestris L.) bark samples were collected at two field sites (Neuglobsow, Roesa) and in different years between 1987 and 1996 in the east of Germany. The barks were analyzed with respect to the following inorganic and organic substances: Al, As, B, Ca, Cd, Ce, Cr, Cu, Fe, Hg, Mo, NH 4 + , Ni, NO 3 - , PO 4 3- , Pb, Sr, SO 4 2- , Ti, V, W, Zr, Zn, benzo(a)pyrene, fluoranthene, pyrene, a-hexachlorocyclohexane (a-HCH) and dichlorodiphenyltrichloroethane (DDT). In addition to bark samples from the site Roesa, 53 test sites were investigated in the Nature Park Duebener Heide. Here, the analysis of the barks aimed at discovering spatial patterns of the above-mentioned substances. Since 1991, most of the determined substances (e.g. sulfate, nitrate, calcium, lead, benzo(a)pyrene, a-HCH) show decreased concentration values in bark samples from both sites. Temporal variations reflect substantial infra-structural changes in eastern Germany, especially at Roesa and in the industrial region around the cities Leipzig, Halle, and Bitterfeld. Moreover, nitrate concentrations in barks are increasing since 1995. The trend can be explained with increased nitrogen emissions from motor traffic and livestock farms. Spatial patterns of sulphate and ammonia reflect inputs from power plants and agriculture in pine stands of the Nature Park Duebener Heide. The results show that barks of pine trees can be used as biomonitoring tools to indicate and characterize depositions of airborne organic and inorganic pollutants. (author)
Setting priorities for ambient air quality objectives
International Nuclear Information System (INIS)
2004-10-01
Alberta has ambient air quality objectives in place for several pollutants, toxic substances and other air quality parameters. A process is in place to determine if additional air quality objectives are required or if existing objectives should be changed. In order to identify the highest priority substances that may require an ambient air quality objective to protect ecosystems and public health, a rigorous, transparent and cost effective priority setting methodology is required. This study reviewed, analyzed and assessed successful priority setting techniques used by other jurisdictions. It proposed an approach for setting ambient air quality objective priorities that integrates the concerns of stakeholders with Alberta Environment requirements. A literature and expert review were used to examine existing priority-setting techniques used by other jurisdictions. An analysis process was developed to identify the strengths and weaknesses of various techniques and their ability to take into account the complete pathway between chemical emissions and damage to human health or the environment. The key strengths and weaknesses of each technique were identified. Based on the analysis, the most promising technique was the tool for the reduction and assessment of chemical and other environmental impacts (TRACI). Several considerations for using TRACI to help set priorities for ambient air quality objectives were also presented. 26 refs, 8 tabs., 4 appendices
Monitoring Of Pollutants In Museum Environment
Directory of Open Access Journals (Sweden)
Ana-Maria Budu
2015-10-01
Full Text Available Art works are affected by environmental factors as light, temperature, humidity. Air pollutants are also implicated in their degradation. The pollution in museums has two sources: the air from outside, which brings usually dust and inorganic particles, and the inside sources – the materials used for casings (sealants, textiles placed on the display cases, varnishes, wood that emanate organic compounds. The dust is composed of particles with a diameter of approximately 2µm or higher, which come from soil (silica or animal and vegetal residues (skin cells, pollen. They facilitate water condensation on objects surface and biologic attack. The inorganic compounds are a result of materials combustion (SO2, NO2, NO and in presence of water they form acidic compounds which affect the museum objects. The organic compounds are usually peroxides, acids, phthalates, formaldehyde. The effects of these pollutants are: soiling, surface discolouration, embrittlement, corrosion. Therefore, conservators are interested in monitoring the pollution degree in the display cases or in the museum air and in analyzing the effects of pollutants on the exhibited objects. They use different methods for pollutants identification, like direct reading devices based on colorimetry, that can be read after few minutes and hours (they interact with the pollutants in atmosphere, or indirect reading samples that require a laboratory. The information gathered is used for the identification of pollution source and to analyze the concentration of pollutants needed to provoke damages on the surfaces of art objects. This paper is a review of pollutants that affect the art objects and of the monitoring systems used for their identification and measuring.
Brumbaugh, William G.; Arms, Jesse W.; Linder, Greg L.; Melton, Vanessa D.
2016-09-19
Between 2010 and 2014, the U.S. Geological Survey completed a series of laboratory and field experiments designed to develop methodology to support the National Park Service’s long-term atmospheric pollutant monitoring efforts in parklands of Arctic Alaska. The goals of this research were to develop passive sampling methods that could be used for long-term monitoring of inorganic pollutants in remote areas of arctic parklands and characterize relations between wet and dry deposition of atmospheric pollutants to that of concentrations accumulated by mosses, specifically the stair-step, splendid feather moss, Hylocomium splendens. Mosses and lichens have been used by National Park Service managers as atmospheric pollutant biomonitors since about 1990; however, additional research is needed to better characterize the dynamics of moss bioaccumulation for various classes of atmospheric pollutants. To meet these research goals, the U.S. Geological Survey investigated the use of passive ionexchange collectors (IECs) that were adapted from the design of Fenn and others (2004). Using a modified IEC configuration, mulitple experiments were completed that included the following: (a) preliminary laboratory and development testing of IECs, (b) pilot-scale validation field studies during 2012 with IECs at sites with instrumental monitoring stations, and (c) deployment of IECs in 2014 at sites in Alaska having known or suspected regional sources of atmospheric pollutants where samples of Hylocomium splendens moss also could be collected for comparison. The targeted substances primarily included ammonium, nitrate, and sulfate ions, and certain toxicologically important trace metals, including cadmium, cobalt, copper, nickel, lead, and zinc.Deposition of atmospheric pollutants is comparatively low throughout most of Alaska; consequently, modifications of the original IEC design were needed. The most notable modification was conversion from a single-stage mixed-bed column to a two
[Snow cover pollution monitoring in Ufa].
Daukaev, R A; Suleĭmanov, R A
2008-01-01
The paper presents the results of examining the snow cover polluted with heavy metals in the large industrial town of Ufa. The level of man-caused burden on the snow cover of the conventional parts of the town was estimated and compared upon exposure to a wide range of snow cover pollutants. The priority snow cover pollutants were identified among the test heavy metals.
A new four-step hierarchy method for combined assessment of groundwater quality and pollution.
Zhu, Henghua; Ren, Xiaohua; Liu, Zhizheng
2017-12-28
A new four-step hierarchy method was constructed and applied to evaluate the groundwater quality and pollution of the Dagujia River Basin. The assessment index system is divided into four types: field test indices, common inorganic chemical indices, inorganic toxicology indices, and trace organic indices. Background values of common inorganic chemical indices and inorganic toxicology indices were estimated with the cumulative-probability curve method, and the results showed that the background values of Mg 2+ (51.1 mg L -1 ), total hardness (TH) (509.4 mg L -1 ), and NO 3 - (182.4 mg L -1 ) are all higher than the corresponding grade III values of Quality Standard for Groundwater, indicating that they were poor indicators and therefore were not included in the groundwater quality assessment. The quality assessment results displayed that the field test indices were mainly classified as grade II, accounting for 60.87% of wells sampled. The indices of common inorganic chemical and inorganic toxicology were both mostly in the range of grade III, whereas the trace organic indices were predominantly classified as grade I. The variabilities and excess ratios of the indices were also calculated and evaluated. Spatial distributions showed that the groundwater with poor quality indices was mainly located in the northeast of the basin, which was well-connected with seawater intrusion. Additionally, the pollution assessment revealed that groundwater in well 44 was classified as "moderately polluted," wells 5 and 8 were "lightly polluted," and other wells were classified as "unpolluted."
Understanding Plant-Microbe Interactions for Phytoremediation of Petroleum-Polluted Soil
Nie, Ming; Wang, Yijing; Yu, Jiayi; Xiao, Ming; Jiang, Lifen; Yang, Ji; Fang, Changming; Chen, Jiakuan; Li, Bo
2011-01-01
Plant-microbe interactions are considered to be important processes determining the efficiency of phytoremediation of petroleum pollution, however relatively little is known about how these interactions are influenced by petroleum pollution. In this experimental study using a microcosm approach, we examined how plant ecophysiological traits, soil nutrients and microbial activities were influenced by petroleum pollution in Phragmites australis, a phytoremediating species. Generally, petroleum pollution reduced plant performance, especially at early stages of plant growth. Petroleum had negative effects on the net accumulation of inorganic nitrogen from its organic forms (net nitrogen mineralization (NNM)) most likely by decreasing the inorganic nitrogen available to the plants in petroleum-polluted soils. However, abundant dissolved organic nitrogen (DON) was found in petroleum-polluted soil. In order to overcome initial deficiency of inorganic nitrogen, plants by dint of high colonization of arbuscular mycorrhizal fungi might absorb some DON for their growth in petroleum-polluted soils. In addition, through using a real-time polymerase chain reaction method, we quantified hydrocarbon-degrading bacterial traits based on their catabolic genes (i.e. alkB (alkane monooxygenase), nah (naphthalene dioxygenase) and tol (xylene monooxygenase) genes). This enumeration of target genes suggests that different hydrocarbon-degrading bacteria experienced different dynamic changes during phytoremediation and a greater abundance of alkB was detected during vegetative growth stages. Because phytoremediation of different components of petroleum is performed by different hydrocarbon-degrading bacteria, plants’ ability of phytoremediating different components might therefore vary during the plant life cycle. Phytoremediation might be most effective during the vegetative growth stages as greater abundances of hydrocarbon-degrading bacteria containing alkB and tol genes were observed
[Monitoring of the chemical composition of snow cover pollution in the Moscow region].
Ermakov, A A; Karpova, E A; Malysheva, A G; Mikhaylova, R I; Ryzhova, I N
2014-01-01
Monitoring of snow cover pollution as an indicator of ambient air pollution in 20 districts in the Moscow region during 2009-2013 was performed. The identification with a quantitative assessment of a wide array of organic compounds and the control of the main physical and chemical and inorganic indices of snow water pollution were carried out. More than 60 organic substances for most of which there are no the hygienic standards were established. The assessment of pollution levels of basic inorganic indices was given by means of the comparing them with the average values in the snow cover in the European territory of Russia and natural content in areas not been exposed to human impact.
Wang, Xiangxue; Fan, Qiaohui; Chen, Zhongshan; Wang, Qi; Li, Jiaxing; Hobiny, Aatef; Alsaedi, Ahmed; Wang, Xiangke
2016-02-01
Graphene oxides (GOs) have come under intense multidisciplinary study because of their unique physicochemical properties and possible applications. The large amount of oxygen-containing functional groups on GOs leads to a high sorption capacity for the removal of various kinds of organic and inorganic pollutants from aqueous solutions in environmental pollution cleanup. However, the lack of selectivity results in difficulty in the selective removal of target pollutants from aqueous solutions in the presence of other coexisting pollutants. Herein, the surface grafting of GOs with special oxygen-containing functional groups using low-temperature plasma techniques and the application of the surface-modified GOs for the efficient removal of organic and inorganic pollutants in environmental pollution are reviewed. This paper gives an account of our research on the application of GO-based nanomaterials in environmental pollution cleanup, including: (1) the synthesis and surface grafting of functional groups on GOs, summarizing various types of low-temperature plasma techniques for the synthesis of graphene/GOs; and (2) the application of graphene/GOs and their composites for the efficient removal of organic and inorganic pollutants from aqueous solutions, including the interaction mechanism according to recently published results. © 2015 The Chemical Society of Japan & Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.
International Nuclear Information System (INIS)
Ramos, Raül; Ramírez, Francisco; Jover, Lluís
2013-01-01
The suitability of sentinel species to monitor environmental pollution is often hampered by an insufficient knowledge on pollutant trophodynamics. We simultaneously evaluated the influence of individuals' trophic position (as revealed by δ 15 N values) and dietary exploitation of particular systems (using δ 13 C and δ 34 S as proxies) on inorganic pollutant concentrations measured on fledglings' feathers of a wide-range feeder, the Yellow-legged Gull (Larus michahellis), sampled at four locations throughout the Western Mediterranean. Concentrations of total Hg and Se in fledgling feathers (2.43 ± 1.30 and 1.16 ± 0.43 μg/g, respectively) were under the threshold points for deleterious effects on seabirds. On the contrary, alarming Pb concentrations were found in one colony (mean: 1.57 ± 2.46 μg/g, range: 0.16–12.13). With the exception of Pb, pollutant concentrations were positively influenced by consumption of marine resources (as suggested by the positive relationship with δ 34 S values), whereas trophic position played a minor role in determining pollutant body burdens. - Graphical abstract: Individual feeding behaviours in wide-range feeders may represent unavoidable knowledge for an appropriate understanding of contaminant acquisition, adding complexity to the study of the dynamic of contaminants throughout food chains. In this case study, pollutant body burden of Yellow-legged gull (Larus michahellis) chicks was highly influenced by dietary exposure, whereas the influence of trophic position was relatively low. Display Omitted Highlights: ► Diet origin (δ 34 S) and trophic position (δ 15 N) were tested relative to Hg, Se, and Pb levels. ► Hg and Se concentrations in gull feathers were highly influenced by δ 34 S signatures. ► Exploited habitat influenced pollutant levels to a greater extent than trophic position. ► Biomagnification processes contribute less to contamination exposure in wide-range feeders. - Pollutant body burden of a wide
Health effects associated with passenger vehicles: monetary values of air pollution.
Marzouk, Mohamed; Madany, Magdy
2012-01-01
Air pollution is regarded as one of the highest priorities in environmental protection in both developed and developing countries. High levels of air pollution have adverse effects on human health that might cause premature death. This study presents the monetary value estimates for the adverse human health effects resulted from ambient air pollution. It aids decision makers to set priorities in the public health relevance of pollution abatement. The main driver of policymaker is the need to reduce the avoidable cardiopulmonary morbidity and mortality from pollutant exposures. The monetary valuation involves 2 steps: (i) relate levels of pollutants to mortality and morbidity (concentration-response relationships) and (ii) apply unit economic values. Cost of air pollution associated with passenger vehicles running over a major traffic bridge (6th of October Elevated Highway) is presented as a case study to demonstrate the use of monetary value of air pollution. The study proves that the cost of air pollution is extremely high and should not be overlooked.
International Nuclear Information System (INIS)
Pontavice, E. du
1976-01-01
Certain provision in international law aim to prevent radioactive marine pollution and others concern compensation of damage from nuclear pollution. Prevention requires regulation of the disposal of wastes from nuclear industry from the operation of nuclear powered ships and from transport of fissile materials. As regards damage, if the measures to limit the extent of the damage come under the law of the sea, the priority of nuclear law over maritime law is clear in respect of financial compensation. (Auth) [fr
Czech Academy of Sciences Publication Activity Database
Farhadi, S.; Dušek, Michal; Siadatnasab, F.; Eigner, Václav; Mokhtari Andani, A.
2017-01-01
Roč. 126, Apr (2017), s. 227-238 ISSN 0277-5387 R&D Projects: GA ČR(CZ) GA15-12653S; GA MŠk LO1603 EU Projects: European Commission(XE) CZ.2.16/3.1.00/24510 Institutional support: RVO:68378271 Keywords : organic–inorganic hybrid * polyoxometallate * dithiocarbamate * adsorption * organic dye pollutants Subject RIV: BM - Solid Matter Physics ; Magnetism OBOR OECD: Condensed matter physics (including formerly solid state physics, supercond.) Impact factor: 1.926, year: 2016
Seasonal dynamics of the inorganic pollution in a Niger Delta River ...
African Journals Online (AJOL)
The level of inorganic anions of the Eleme River over the rainy and dry season periods was investigated. Results indicated that parameters like temperature, conductivity and total dissolved solids were higher during the dry than rainy seasons. Others like pH, phosphate, sulfate and dissolved oxygen had higher rainy than ...
DEFF Research Database (Denmark)
Lützhøft, Hans-Christian Holten; Donner, Erica; Wickman, Tonie
2012-01-01
for this purpose. Methods Existing source classification systems were examined by a multidisciplinary research team, and an optimised SCF was developed. The performance and usability of the SCF were tested using a selection of 25 chemicals listed as priority pollutants in Europe. Results The SCF is structured...... in the form of a relational database and incorporates both qualitative and quantitative source classification and release data. The system supports a wide range of pollution monitoring and management applications. The SCF functioned well in the performance test, which also revealed important gaps in priority...
An overview of environmental pollution and monitoring techniques
International Nuclear Information System (INIS)
Qureshi, I.H.
1997-01-01
Environmental pollution has become a world-wide concern as it is likely to affect the ecological system and human health. The indiscriminate release of harmful chemicals and toxic heavy metals in the environment by industrial, agricultural and other activities of man may adversely affect the quality of our air, water and food resources. These toxic chemicals may find their way to living organisms and human body through food chain and may induce various metabolic disorders. It is, therefore, necessary to assess the quality of environment by measuring the concentration of pollutants in air, water, soil and food materials and to establish base-line level. Since the pollutants are present in extremely small amounts, sensitive and accurate analytical techniques have to be employed to obtain reliable data. Studies on the measurement of essential and toxic inorganic elements in various food items and other materials have been carried out at PINSTECH with a view to assess the safety of diet and to establish baseline values. These values will he helpful, in future, to monitor the degree of pollution and to suggest possible remedial and control measures. The estimation of some of the inorganic pollutants and the techniques used in our laboratories and briefly discussed. (author)
Marine pollution studies in Pakistan by nuclear techniques
International Nuclear Information System (INIS)
Qureshi, R.M.; Mashiatullah, A.; Javed, T.; Tasneem, M.A.
2001-01-01
This paper describes a comprehensive study on pollution aspects of Manora Channel-Karachi Coast, Pakistan. In addition to use of conventional non-nuclear pollution monitoring tools (Coliform population, electrical conductivity, turbidity etc.), we evaluate the role of environmental stable carbon isotope technique (delta /sup 13/C of the total dissolved inorganic carbon-TDIC) to establish marine pollution transport scenario for Manora Channel. Data shows that tidal fluctuations play a key role in distribution of contamination inventories in Manora Channel. (author)
Tsai, Ying I.; Sopajaree, Khajornsak; Chotruksa, Auranee; Wu, Hsin-Ching; Kuo, Su-Ching
2013-10-01
PM10 aerosol was collected between February and April 2010 at an urban site (CMU) and an industrial site (TOT) in Chiang Mai, Thailand, and characteristics and provenance of water-soluble inorganic species, carboxylates, anhydrosugars and sugar alcohols were investigated with particular reference to air quality, framed as episodic or non-episodic pollution. Sulfate, a product of secondary photochemical reactions, was the major inorganic salt in PM10, comprising 25.9% and 22.3% of inorganic species at CMU and TOT, respectively. Acetate was the most abundant monocarboxylate, followed by formate. Oxalate was the dominant dicarboxylate. A high acetate/formate mass ratio indicated that primary traffic-related and biomass-burning emissions contributed to Chiang Mai aerosols during episodic and non-episodic pollution. During episodic pollution carboxylate peaks indicated sourcing from photochemical reactions and/or directly from traffic-related and biomass burning processes and concentrations of specific biomarkers of biomass burning including water-soluble potassium, glutarate, oxalate and levoglucosan dramatically increased. Levoglucosan, the dominant anhydrosugar, was highly associated with water-soluble potassium (r = 0.75-0.79) and accounted for 93.4% and 93.7% of anhydrosugars at CMU and TOT, respectively, during episodic pollution. Moreover, levoglucosan during episodic pollution was 14.2-21.8 times non-episodic lows, showing clearly that emissions from biomass burning are the major cause of PM10 episodic pollution in Chiang Mai. Additionally, the average levoglucosan/mannosan mass ratio during episodic pollution was 14.1-14.9, higher than the 5.73-7.69 during non-episodic pollution, indicating that there was more hardwood burning during episodic pollution. Higher concentrations of glycerol and erythritol during episodic pollution further indicate that biomass burning activities released soil biota from forest and farmland soils.
International Nuclear Information System (INIS)
Schulz, H.; Schulz, U.; Huhn, G.; Schuermann, G.
2000-01-01
A total of 273 pine bark samples collected from various pine stands in Central and East Germany, South Norway, Poland, and Russia was analyzed with respect to 20 inorganic and organic substances (sulphate, nitrate, ammonia, calcium, 3 PAHs, 5 heavy metals, 9 other elements). Multivariate statistics were applied to characterize the multiple exposure of airborne pollutants in terms of major sources, deposition types and impact levels. The former was studied with factor analysis, whilst the latter two were addressed by applying cluster and discrimination analysis. Factor analysis of the concentration values suggest separation into three factors with the following characteristics: Factor 1 shows higher contributions from sulphate and calcium, factor 2 from fluoranthene, benzo(a)pyrene as well as from pyrene, and factor 3 from nitrate and ammonia, respectively. According to results from the cluster analysis, three major deposition types can be identified: 'Industry and House heating', 'Motor traffic', and 'Agriculture'. The first deposition type is characterized by high contents of sulphate and calcium. The other two deposition types contain specific composition profiles for nitrogen-containing components and PAHs. Impact levels are separately classified with the characteristic variables of main deposition types. Finally, discriminant analysis is used to allocate new bark samples to the classified deposition types and impact levels. The results demonstrate the usefulness of multivariate statistical techniques to characterize and evaluate multiple exposure patterns of airborne pollutants in forest ecosystems. (author)
Microbial processes in coastal pollution
International Nuclear Information System (INIS)
Capone, D.G.; Bauer, J.E.
1992-01-01
In this chapter, the authors describe the nature and range of some of the interactions that can occur between the microbiota and environmental contaminants in coastal areas. The implications of such interactions are also discussed. Pollutant types include inorganic nutrients, heavy metals, bulk organics, organic contaminants, pathogenic microorganisms and microbial pollutants. Both the effects of pollutants such as petroleum hydrocarbons on natural microbial populations and the mitigation of contaminant effects by complexation and biodegradation are considered. Finally, several areas of emerging concerns are presented that involve a confluence of biogeochemistry, microbial ecology and applied and public health microbiology. These concerns range in relevance from local/regional to oceanic/global scales. 308 ref
Classification,Hazards and Countermeasures of Agricultural Environmental Pollution Emergencies
Institute of Scientific and Technical Information of China (English)
Xiaoming; CHUAI; Haixia; ZHOU; Jianping; ZHAO; Shubo; CHENG; Jiang; YU
2013-01-01
Agricultural environmental pollution emergencies have become a hot research topic because of the high incidence and influence depth.This paper introduces classification and features of agricultural environmental pollution emergencies:by pollutant type,it falls into organic pollution emergencies and inorganic pollution emergencies;by the approach of entering agricultural environment,it falls into water resource agricultural environmental pollution emergencies and non-water resource agricultural environmental pollution emergencies.Hazards of agricultural environmental pollution emergencies are analyzed from 4 perspectives:personal security,indirect loss,ecological environment and social stability.In view of the hazards,countermeasures are given to deal with the pollution emergencies as(i)establishing a risk evaluation mechanism for agricultural environment;(ii)enhancing the capacity of handling agricultural environmental pollution emergencies;(iii)introducing new management concepts for environmental emergencies,and cultivating keen emergency management consciousness.
Directory of Open Access Journals (Sweden)
Е.Е. Andreeva
2015-12-01
Full Text Available On the base of the comparison of pollutional indexes in the environmental media of the Russian Federation and Moscow city the priority pollutants in ambient air and in water from centralized drinking water supply of Moscow have been established. A hygienic study of the population in Moscow was conducted to assess health risk related to chemical pollution of the ambient air and water from the systems of the centralized drinking water supply. The results of hygienic characteristics of the habitat’s pollution and health risk assessment among the population in Moscow have revealed that the priority risk factors negatively effecting the population are: benzene, nitrogen dioxide, weighed substances, formaldehyde, nitrogen oxide, ozone – for ambient air, and also arsenic and chrome (IV – for water from the systems of the centralized drinking water supply.
International Nuclear Information System (INIS)
Winkels, H.J.; Kroonenberg, S.B.; Lychagin, M.Y.; Marin, G.; Rusakov, G.V.; Kasimov, N.S.
1998-01-01
Six sediment cores were taken in sedimentation zones of the Volga river (located in the southern part of the Russian Federation) and, additionally, 6 sediment cores were taken in several lakes (sedimentation zones) in the central and western part of the Danube delta in Romania. Priority pollutants (8 metals, 7 polychlorinated biphenyls and 10 polycyclic aromatic hydrocarbons) were determined in all samples of all cores. Present-day and historical levels of pollutants since the late 1930s were established through the use of radionuclide time tracers ( 137 Cs, 134 Cs). For the persistent metals and polycyclic aromatic hydrocarbons, trends in the concentration profiles during the last 5 decades are described. Low and hardly changing concentrations of As, Cu, Zn and all studied PAHs were observed during the last five decades in the sediments of the Volga river. Recently deposited sediments show slightly increasing levels for the heavy metals Zn and Cr and As in the Volga delta. For the studied metals and PAHs, maximum concentrations were found around 1987 in the sediments of the Danube delta. Sediments deposited around 1940 and recently deposited sediments in the Danube delta showed lower pollutant levels. If the contents of heavy metals, PAHs and PCBs in the aquatic sediments in the deltas of the rivers Rhine, Danube and Volga are compared, it is clear that the Volga delta is and was the cleanest delta during the last 5 decades. Nowadays the contents of heavy metals (except Cu and Ni), PAHs and PCBs in the aquatic sediments of the river Rhine are still highest compared to the other two rivers. The recent load of heavy metals (except Cd and Zn) in the sediments of the river Danube is the highest compared to the other two rivers. (Copyright (c) 1998 Elsevier Science B.V., Amsterdam. All rights reserved.)
The Outdoor Air Pollution and Brain Health Workshop
Block, Michelle L.; Elder, Alison; Auten, Rick L.; Bilbo, Staci D.; Chen, Honglei; Chen, Jiu-Chiuan; Cory-Slechta, Deborah A.; Costa, Daniel; Diaz-Sanchez, David; Dorman, David C.; Gold, Diane; Gray, Kimberly; Jeng, Hueiwang Anna; Kaufman, Joel D.; Kleinman, Michael T.; Kirshner, Annette; Lawler, Cindy; Miller, David S.; Nadadur, Sri; Ritz, Beate; Semmens, Erin O.; Tonelli, Leonardo H.; Veronesi, Bellina; Wright, Robert O.; Wright, Rosalind
2013-01-01
Accumulating evidence suggests that outdoor air pollution may have a significant impact on central nervous system (CNS) health and disease. To address this issue, the National Institute of Environmental Health Sciences/National Institute of Health convened a panel of research scientists that was assigned the task of identifying research gaps and priority goals essential for advancing this growing field and addressing an emerging human health concern. Here, we review recent findings that have established the effects of inhaled air pollutants in the brain, explore the potential mechanisms driving these phenomena, and discuss the recommended research priorities/approaches that were identified by the panel. PMID:22981845
Progress in Treatment of Oily Wastewater by Inorganic Porous Ceramic Membrane
Directory of Open Access Journals (Sweden)
Dai Xiaoyuan
2017-01-01
Full Text Available The composition and complexity of oily wastewater contains many solid particles, free oil, emulsified oil and so on.It brought about a series of environmental pollution problems when oily wastewater was directly discharged into rivers, lakes and other water bodies. Therefore, researchers are committed to study how to deal with oily wastewater to deal with oily wastewater to apply it to meet the requirements of water injection.Inorganic porous ceramic membrane has excellent properties among many filtering methods. For example, high temperature and high pressure resistance, resistance to acid and alkali, low energy consumption, no pollution to the environment and has a good prospect in the field of oily wastewater treatment, which has attracted the attention of many scholars not only at home but also on abroad. This article describes the present situation of the research on the treatment of oily wastewater by ceramic membrane in recent years, and expounded the significance of the treatment of oily wastewater to people’s lives and makes an expectation for the development of inorganic porous ceramic membrane in the future.
Priority substances in combined sewer overflows: case study of the Paris sewer network.
Gasperi, J; Garnaud, S; Rocher, V; Moilleron, R
2011-01-01
This study was undertaken to supply data on both priority pollutant (PP) occurrence and concentrations in combined sewer overflows (CSOs). A single rain event was studied on 13 sites within the Paris sewer network. For each sample, a total of 66 substances, including metals, polycyclic aromatic hydrocarbons (PAHs), pesticides, organotins, volatile organic compounds, chlorobenzenes, phthalates and alkylphenols were analyzed. Of the 66 compounds analyzed in all, 40 PPs including 12 priority hazardous substances were detected in CSOs. As expected, most metals were present in all samples, reflecting their ubiquitous nature. Chlorobenzenes and most pesticides were never quantified above the limit of quantification, while the majority of the other organic pollutants, except DEHP (median concentration: 22 μg.l(-1)), were found to lie in the μg.l(-1) range. For the particular rain event studied, the pollutant loads discharged by CSOs were evaluated and then compared to pollutant loads conveyed by the Seine River. Under the hydraulic conditions considered and according to the estimations performed, this comparison suggests that CSOs are potentially significant local source of metals, PAHs and DEHP. Depending on the substance, the ratio between the CSO and Seine River loads varied from 0.5 to 26, underscoring the important local impact of CSOs at the scale of this storm for most pollutants.
Hydrothermal synthetic strategies of inorganic semiconducting nanostructures.
Shi, Weidong; Song, Shuyan; Zhang, Hongjie
2013-07-07
Because of their unique chemical and physical properties, inorganic semiconducting nanostructures have gradually played a pivotal role in a variety of research fields, including electronics, chemical reactivity, energy conversion, and optics. A major feature of these nanostructures is the quantum confinement effect, which strongly depends on their size, shape, crystal structure and polydispersity. Among all developed synthetic methods, the hydrothermal method based on a water system has attracted more and more attention because of its outstanding advantages, such as high yield, simple manipulation, easy control, uniform products, lower air pollution, low energy consumption and so on. Precise control over the hydrothermal synthetic conditions is a key to the success of the preparation of high-quality inorganic semiconducting nanostructures. In this review, only the representative hydrothermal synthetic strategies of inorganic semiconducting nanostructures are selected and discussed. We will introduce the four types of strategies based on exterior reaction system adjustment, namely organic additive- and template-free hydrothermal synthesis, organic additive-assisted hydrothermal synthesis, template-assisted hydrothermal synthesis and substrate-assisted hydrothermal synthesis. In addition, the two strategies based on exterior reaction environment adjustment, including microwave-assisted and magnetic field-assisted hydrothermal synthesis, will be also described. Finally, we conclude and give the future prospects of this research area.
Origin of polluted air masses in the Alps. An overview and first results for MONARPOP
International Nuclear Information System (INIS)
Kaiser, August
2009-01-01
The contribution of ZAMG to MONAROP consists of special weather forecasts to control the SOCs sampling procedure and of the analysis of the specific transport processes for SOCs, which is still in progress. In this paper, air pollutant transport into the Alps is demonstrated by examples of inorganic pollutants: Measurements of NO x and ozone provide evidence for air pollutant transport by local wind systems (valley and slope winds), especially at low elevated sites of the Alps. In addition, trajectory analyses for the high elevation sites demonstrate the importance of large scale synoptic air pollutant transport. The effects of these transport processes with different spatial and temporal scales are governed by the physical and chemical properties of the particular pollutant. First results for the high alpine MONARPOP stations show that air masses from east Europe influence mostly Sonnblick (Austria), whereas the influence of the Po basin is strongest at Weissfluhjoch (Switzerland). - Effects of meteorological transport processes on air pollution in the Alps are demonstrated by examples of inorganic pollutants and first conclusions for SOCs are drawn.
40 CFR 35.915 - State priority system and project priorty list.
2010-07-01
... OTHER FEDERAL ASSISTANCE STATE AND LOCAL ASSISTANCE Grants for Construction of Treatment Works-Clean... State priority system shall be based on the following criteria: (A) The severity of the pollution problem; (B) The existing population affected; (C) The need for preservation of high quality waters; and...
International Nuclear Information System (INIS)
Bogachev, V.; Adrianova, G.; Zaitzev, V.; Kalinin, V.; Kovalenko, E.; Makeev, A.; Malikova, L.; Popov, Yu.; Savenkov, A.; Shnyakina, V.
1996-01-01
The purpose of the research: Development of methods for the remediation of artificial polluted soils and the improvement of polluted lands to ecologically clean agricultural production.The following tasks will be implemented in this project to achieve viable practical solutions: - To determine the priority pollutants, their ecological pathways, and sources of origin. - To form a supervised environmental monitoring data bank throughout the various geo system conditions. - To evaluate the degree of the bio geo system pollution and the influence on the health of the local human populations. - To establish agricultural plant tolerance levels to the priority pollutants. - To calculate the standard concentrations of the priority pollutants for main agricultural plant groups. - To develop a soil remediation methodology incorporating the structural, functional geo system features. - To establish a territory zone division methodology in consideration of the degree of component pollution, plant tolerance to pollutants, plant production conditions, and human health. - Scientific grounding of the soil remediation proposals and agricultural plant material introductions with soil pollution levels and relative plant tolerances to pollutants. Technological Means, Methods, and Approaches Final proposed solutions will be based upon geo system and ecosystem approaches and methodologies. The complex ecological valuation methods of the polluted territories will be used in this investigation. Also, laboratory culture in vitro, application work, and multi-factor field experiments will be conducted. The results will be statistically analyzed using appropriate methods. Expected Results Complex biogeochemical artificial province assessment according to primary pollutant concentrations. Development of agricultural plant tolerance levels relative to the priority pollutants. Assessment of newly introduced plant materials that may possess variable levels of pollution tolerance. Remediation
Water pollution by non-radioactive materials
International Nuclear Information System (INIS)
Dickenbrok, G.
1974-01-01
Water is in constant circulation from the ocean to the earth's atmosphere and back to the ocean. In the course of this cycle, the composition of the water is altered by natural and human influences. Depending on the prevailing conditions, the water may contain solute gases, undissolved substances, inorganic salts, organic compounds, and microorganisms of varying types and concentrations. Many of these substances are known to pollute the water and thus to threaten its various uses. Emitting sources of water pollutants are: waste waters, seepings from open dumpings, mineral fertilizers and biocides washed out from agricultural areas, water pollutants emitted during storage and transport, air pollutants, and erosions from roads. The thermal load is an additional factor. Technical and legal steps are necessary in order to prevent water pollution and to maintain the quality of water required for its various uses. These measures are treated in detail. (orig./AK) [de
Priorities for toxic wastewater management in Pakistan
Energy Technology Data Exchange (ETDEWEB)
Rahman, A. [Sustainable Development Policy Institute, Islamabad (Pakistan)
1996-12-31
This study assesses the number of industries in Pakistan, the total discharge of wastewater, the biological oxygen demand (BOD) load, and the toxicity of the wastewater. The industrial sector is a major contributor to water pollution, with high levels of BOD, heavy metals, and toxic compounds. Only 30 industries have installed water pollution control equipment, and most are working at a very low operational level. Priority industrial sectors for pollution control are medium- to large-scale textile industries and small-scale tanneries and electroplating industries. Each day the textile industries discharge about 85,000 m{sup 3} of wastewater with a high BOD, while the electroplating industries discharge about 23,000 m{sup 3} of highly toxic and hazardous wastewater. Various in-plant modifications can reduce wastewater discharges. Economic incentives, like tax rebates, subsidies, and soft loans, could be an option for motivating medium- to large-scale industries to control water pollution. Central treatment plants may be constructed for treating wastewater generated by small-scale industries. The estimated costs for the treatment of textile and electroplating wastewater are given. The legislative structure in Pakistan is insufficient for control of industrial pollution; not only do existing laws need revision, but more laws and regulations are needed to improve the state of affairs, and enforcement agencies need to be strengthened. 15 refs., 1 fig., 9 tabs.
Towards sustainable pollution management
Jern, N. G. W.
2017-03-01
It is often overlooked pollution control itself may not be entirely free from adverse impact on the environment if considered from a more holistic perspective. For example mechanised wastewater treatment is energy intensive and so has a carbon footprint because of the need to move air to supply oxygen to the aerobic treatment process. The aerobic treatment process then results in excess bio-sludge which requires disposal and if such is not appropriately performed, then there is risk of surface and groundwater contamination. This presentation explores the changes which have been investigated and are beginning to be implemented in wastewater, sludge, and agro-industrial wastes management which are more environmentally benign. Three examples shall be used to illustrate the discussion. The first example uses the conventional sewage treatment system with a unit process arrangement which converts carbonaceous pollutants from soluble and colloidal forms to particulate forms with an aerobic process before attempting energy recovery with an anaerobic process. Such an arrangement does, however, result in a negative energy balance. This is not withstanding the fact there is potentially more energy in sewage than is required to treat it if that energy can be effectively harvested. The latter can be achieved by removing the carbonaceous pollutants before the aerobic process and thereby using the aerobic process for polishing instead of treating. The carbonaceous pollutants so recovered then becomes the feed for the anaerobic process. Unfortunately conventional anaerobic sludge digestion only removes 35-45% of the organic material fed. Since biogas production (and hence energy recovery) is linked to the amount of organic material which can be degraded anaerobically, the effectiveness of the anaerobic digestion process needs to be improved. Contrary to a commonly held belief wherein methanogenesis is the “bottleneck” in anaerobic processes, hydrolysis is in sludge digestion
NSGIC Education | GIS Inventory — Environmental Modeling dataset current as of 1999. A goal of the Baseline Sampling and Analysis program is to determine baseline levels of select priority pollutants...
Mixtures of organic and inorganic substrates, particle size and proportion
International Nuclear Information System (INIS)
Morales-Maldonado, Emilio Raymundo; Casanova-Lugo, Fernando
2015-01-01
The mixtures of organic and inorganic materials used in the preparation of a new material, particle size, proportion and their response in plant were reviewed. Agricultural wastes are considered a pollutant reservoir in Mexico; however, for another perspective this represent an industry with great potential. The nutrients ingested by animals represent nutriments available for plants when properly recycled. The production of compost and vermicompost is an option that minimize the risk of contamination and improve quality. Both processes are an alternative for organic production. The efficiency of irrigation and fertilization are affected for the reducing the volumen of an organic material incresase compaction and compression of roots. The mixtures with inorganic materials are used in the development of a new material to obtain better growing conditions for the plant. (author) [es
Inorganic Fullerene-Like Nanoparticles and Inorganic Nanotubes
Directory of Open Access Journals (Sweden)
Reshef Tenne
2014-11-01
Full Text Available Fullerene-like nanoparticles (inorganic fullerenes; IF and nanotubes of inorganic layered compounds (inorganic nanotubes; INT combine low dimensionality and nanosize, enhancing the performance of corresponding bulk counterparts in their already known applications, as well as opening new fields of their own [1]. This issue gathers articles from the diverse area of materials science and is devoted to fullerene-like nanoparticles and nanotubes of layered sulfides and boron nitride and collects the most current results obtained at the interface between fundamental research and engineering.[...
Impacts of National Decarbonization Targets for Subnational Societal Priorities
Peng, W.; Iyer, G.
2017-12-01
Carbon mitigation has well-recognized linkages with other environmental and socioeconomic priorities, such as air pollution, economic development, employment, etc. While climate change is a global issue, many other societal priorities are local concerns. Since local efforts form the pillars of achieving co-benefits and avoiding dis-benefits at the national level, it is critical to go beyond national-level analyses and focus on the synergies and tradeoffs at the subnational level. Here we use the United States as an example to evaluate the impacts of mid-century national-level deep decarbonization target for state-level societal priorities. Based on the Global Change Assessment Model with state-level details for the US (GCAM-USA), we design two mid-century scenarios: A Reference scenario that assumes the U.S. undertakes no additional climate mitigation policy, and a Deep Decarbonization Scenario that assumes the U.S. achieves the NDC goal through 2025 (26-28% reduction relative to 2005 levels) and then follows a straight-line trajectory to 80% reductions in economy-wide GHG emissions by 2050 relative to 2005. We then compare these two scenarios for a variety of metrics of carbon mitigation and other societal priorities in 2050. We highlight two findings. First, the synergies and tradeoffs of carbon mitigation with other societal goals at the subnational level can be quite different from the national level. For example, while deep decarbonization could improve national energy security by reducing the overall dependence on energy imports, it may exacerbate energy independence goals for some states by increasing inter-state electricity imports. Second, achieving national-level decarbonization target could result in unequal regional impacts across states. We find uneven geographic impacts for air pollution (more co-reductions occur in the eastern states), economic costs (energy prices increase more in the northeastern states) and employment (jobs increase in the western
Waste minimization/pollution prevention study of high-priority waste streams
International Nuclear Information System (INIS)
Ogle, R.B.
1994-03-01
Although waste minimization has been practiced by the Metals and Ceramics (M ampersand C) Division in the past, the effort has not been uniform or formalized. To establish the groundwork for continuous improvement, the Division Director initiated a more formalized waste minimization and pollution prevention program. Formalization of the division's pollution prevention efforts in fiscal year (FY) 1993 was initiated by a more concerted effort to determine the status of waste generation from division activities. The goal for this effort was to reduce or minimize the wastes identified as having the greatest impact on human health, the environment, and costs. Two broad categories of division wastes were identified as solid/liquid wastes and those relating to energy use (primarily electricity and steam). This report presents information on the nonradioactive solid and liquid wastes generated by division activities. More specifically, the information presented was generated by teams of M ampersand C staff members empowered by the Division Director to study specific waste streams
Air pollution: Tropospheric ozone, and wet deposition of sulfate and inorganic nitrogen
John W. Coulston
2009-01-01
The influence of air pollutants on ecosystems in the United States is an important environmental issue. The term âair pollutionâ encompasses a wide range of topics, but acid deposition and ozone are primary concerns in the context of forest health. Acid deposition partially results from emissions of sulfur dioxide, nitrogen oxides, and ammonia that are deposited in wet...
HOW AGRICULTURAL CHEMISTRY CAN CONTRIBUTE TO DEALING WITH PROBLEMS OF ENVIRONMENTAL POLLUTION
Directory of Open Access Journals (Sweden)
Carlo Emanuele Gessa
2010-08-01
Full Text Available Soil is a complex heterogeneous system whose physical, chemical and biological properties regulate interactions with the chemical species which reach its surface. Soil chemistry is an essential tool for understanding and predicting these interactions. Soil is able to immobilize and transform organic and inorganic molecules by different mechanisms, such as complexing and redox reactions. This behaviour gives soil detoxifying capacities towards pollutants which accumulate in the environment. Pollution by heavy metals is regulated by their solubility in soil solution which in turn depends on soil pH and redox properties and metal speciation. Organic and inorganic colloidal soil fractions can promote the immobilisation, degradation, and diffusion of organic molecules such as agrochemicals, solvents, hydrocarbons and other chemicals which reach the soil by anthropic activities. Predicting the fate of xenobiotics in soil, water, air, and plant ecosystems, the recycling of biomass and the decontamination of polluted soils are of major concern to soil chemistry.
Strižak, Zeljka; Ivanković, Dušica; Pröfrock, Daniel; Helmholz, Heike; Cindrić, Ana-Marija; Erk, Marijana; Prange, Andreas
2014-02-01
Cytosolic profiles of several priority pollutant metals (Cu, Cd, Zn, Pb) and metalloid As were analyzed in the digestive gland of the mussel (Mytilus galloprovincialis) sampled at locations with different environmental pollution levels along the Croatian coast in the spring and summer season. Size-exclusion chromatography (SEC) connected to inductively coupled plasma mass spectrometry (ICP-MS) was used to determine selected elements bound to cytosolic biomolecules separated based on their molecular size. Copper, cadmium and zinc eluted mostly associated with high molecular weight (HMW) and medium molecular weight (MMW) biomolecules, but with a more prominent elution in the MMW peak at polluted locations which were probably associated with the 20 kDa metallothionein (MT). Elution of all three metals within this peak was also strongly correlated with cytosolic Cd as strong inducer of MT. Lead mostly eluted in HMW biomolecule range, but in elevated cytosolic Pb concentrations, significant amount eluted in low molecular weight (LMW) biomolecules. Arsenic, on the other hand eluted almost completely in LMW range, but we could not distinguish specific molecular weight biomolecules which would be predominant in detoxification mechanism. Seasonal variability in element abundance within specific peaks was present, although not in the same extent, for all elements and locations, especially for As. The results confirm the suitability of the distribution of selected metals/metalloids among different cytosolic ligands as potential indicator for metal exposure. Obtained findings can also serve as guidelines for further separation and characterization of specific cytosolic metal-binding biomolecules. © 2013.
Phytoremediation of Industrial and Pharmaceutical Pollutants
Directory of Open Access Journals (Sweden)
Swarna Shikha
2016-10-01
Full Text Available Pollution in water bodies and soil is a major and ever-increasing environmental issue nowadays, and most conventional remediation approaches do not provide appropriate solutions. The contamination of soil is a major concern for the environment and needs to be remediated. These pollutants include complex organic compounds, heavy metals released from industries and plants and natural products such as oils from accidental release. Further the nature of pollution will be governed by the source and type of the contaminant, and other inorganic compounds are released into the environment from a number of sources like mining, smelting, electroplating, and farming. Plants can clean up many types of contaminants like metals, pesticides, oils, and explosives. Phytoremediation is emerging as a bio-based and low-cost alternative in the cleanup of heavy metal-contaminated soils.
Zhang, Yuan-zhu; He, Qiu-fang; Jiang, Yong-jun; Li, Yong
2016-04-15
In a karst groundwater system, it develops complex multiple flows because of its special geological structure and unique physical patterns of aquifers. In order to investigate the characteristics and transport patterns of ammonia, nitrite and nitrate in epikarst water and subterranean stream, the water samples were collected monthly in a fast-urbanizing karst region. The results showed distinctive characteristics of three forms of inorganic nitrogen. The concentration of inorganic nitrogen was stable in the epikarst water while it was fluctuant in the subterranean stream. Epikarst water was less affected by rainfall and sewage compared with subterranean stream. In epikarst water, the nitrate concentration was much higher than the ammonia concentration. Dissolved inorganic nitrogen, mainly from non-point source pollution related to agricultural activities, passed in and out of the epikarst water based on a series of physical; chemical and biological processes in the epikarst zone, such as ammonification, adsorption and nitrification. On the contrary, subterranean stream showed a result of NH₄⁺-N > NO₃⁻-N in dry seasons and NO₃⁻-N > NH₄⁺-N in rainy seasons. This can be due to the fact that sanitary and industrial sewage flowed into subterranean river through sinkholes, fissures and grikes in dry season. Dissolved inorganic nitrogen in subterranean river was mainly from the non-point source pollution in wet season. Non-point source pollutants entered into subterranean water by two transport ways, one by penetration along with vadose flow through fissures and grikes, and the other by conduit flow through sinkholes from the surface runoff, soil water flow and epikarst flow. The export flux of DIN was 56.05 kg · (hm² · a)⁻¹, and NH₄⁺-N and NO₃⁻-N accounted for 46.03% and 52.51%, respectively. The contributions of point-source pollution and non point-source pollution to the export flux of DIN were 25.08% and 74.92%, respectively, based on run
An assessment of the effect of industrial pollution on Ibese River ...
African Journals Online (AJOL)
user
downstream trend of increase in organic and inorganic pollution was declared. ... industrialization of the watershed at Ibese area in Ikorodu contributed to the water quality deterioration ... channel to Abuja Village to join the Lagos Lagoon at.
Neutron activation analysis of airborne inorganic pollutants
International Nuclear Information System (INIS)
Oerdoegh, M.; Kalman, L.
1975-01-01
The aim of the studies was to determine the radioactive and non-radioactive pollution of the air in the environment of the atomic reactor WWR-S of the Hungarian Academy of Sciences. Accordingly the investigations were carried out by two ways: the samples were analysed partly without previous irradiation and partly by neutron activation analysis. The use of several filter papers was studied and the most suitable filter paper (Whatman No. 41) was chosen for this investigation. The quantitative determination of more than twenty elements has been performed. First the natural activity of the aerosol samples taken periodically was measured and subsequently they have been analysed after irradiation in the atomic reactor for 1 minute, 1 hour, and 50 hours, respectively. A 45 cm 3 Ge/Li detector/ Nuclear Diodes/ was used in connection with a 1024 channel analyzer /type NTA-512B/. The analyses were made nondestructively, and the gamma-spectra were evaluated by computer. (K.A.)
Directory of Open Access Journals (Sweden)
Mesfin M. Mekonnen
2015-02-01
Full Text Available This paper assesses the sustainability, efficiency and equity of water use in Latin America and the Caribbean (LAC by means of a geographic Water Footprint Assessment (WFA. It aims to provide understanding of water use from both a production and consumption point of view. The study identifies priority basins and areas from the perspectives of blue water scarcity, water pollution and deforestation. Wheat, fodder crops and sugarcane are identified as priority products related to blue water scarcity. The domestic sector is the priority sector regarding water pollution from nitrogen. Soybean and pasture are priority products related to deforestation. We estimate that consumptive water use in crop production could be reduced by 37% and nitrogen-related water pollution by 44% if water footprints were reduced to certain specified benchmark levels. The average WF per consumer in the region is 28% larger than the global average and varies greatly, from 912 m3/year per capita in Nicaragua to 3468 m3/year in Bolivia. Ironically, the LAC region shows significant levels of undernourishment, although there is abundant water and food production in the region and substantial use of land and water for producing export crops like soybean.
Atmospheric Pollution: Its Origins and Prevention.
Meetham, A. R.
Although atmospheric pollution can be reduced or eliminated in many different ways, each way involves questions of economics, the time factor, availability of materials, priority over other urgent reforms, and individual and social psychology. To provide a basis for consideration of these questions, this book gives information not only about the…
Directory of Open Access Journals (Sweden)
S. De
2016-03-01
Full Text Available Landfill leachates are potential threats for environmental degradation. This study was conducted to determine the leachate quality, to identify the dominant pollutants and to evaluate the leachate pollution potential of an active and closed dumping ground of an uncontrolled municipal solid waste landfill site in Kolkata, India using leachate pollution index. The results of the physico-chemical and biological analyses of leachate indicated that landfill site was in its methanogenic phase. Among the analysed leachate pollutants, TDS, BOD5, COD, TKN, NH3-N, Cl¯, TCB, Pb, and Hg surpassed the leachate discharge standards for inland surface water as specified by the municipal solid waste (Management and Handling Rules, 2013 for both the dumping grounds. Moreover the concentrations of total Cr and Zn also exceeded the leachate disposal standards for the active dumping ground. The leachate pollution potentialities of both the active and closed dumping grounds were comparable as the overall LPI obtained 34.02 and 31.80 respectively. The overall LPI, LPI organic (LPIor, LPI inorganic (LPIin and LPI heavy metals (LPIhm of both the dumping grounds largely exceeded the LPI and sub-LPI values for treated leachate before disposal to the inland surface water. In terms of the individual pollution rating, total coliform bacteria, TKN, NH3-N and Hg were identified as the dominant pollutants and major contributing factors for the leachate pollution potential.
International Nuclear Information System (INIS)
De, S.; Maiti, S. K.; Hazra, T.; Debsarkar, A.; Dutta, A.
2016-01-01
Landfill leachates are potential threats for environmental degradation. This study was conducted to determine the leachate quality, to identify the dominant pollutants and to evaluate the leachate pollution potential of an active and closed dumping ground of an uncontrolled municipal solid waste (MSW) landfill site in Kolkata, India using leachate pollution index. The results of the physico-chemical and biological analyses of leachate indicated that landfill site was in its methanogenic phase. Among the analysed leachate pollutants, TDS, BOD5, COD, TKN, NH3-N, Cl¯ , TCB, Pb, and Hg surpassed the leachate discharge standards for inland surface water as specified by the municipal solid waste (management and handling) rules, 2013 for both the dumping grounds. Moreover the concentrations of total Cr and Zn also exceeded the leachate disposal standards for the active dumping ground. The leachate pollution potentialities of both the active and closed dumping grounds were comparable as the overall LPI obtained 34.02 and 31.80 respectively. The overall LPI, LPI organic (LPIor), LPI inorganic (LPIin) and LPI heavy metals (LPIhm) of both the dumping grounds largely exceeded the LPI and sub-LPI values for treated leachate before disposal to the inland surface water. In terms of the individual pollution rating, total coliform bacteria, TKN, NH3-N and Hg were identified as the dominant pollutants and major contributing factors for the leachate pollution potential.
Soil pollution from motor car emissions in the highest region of the Tauern mountains autobahn
International Nuclear Information System (INIS)
Kasperowski, E.; Frank, E.
1990-01-01
In a pilot study, pollutant loads from motor traffic were investigated and quantified in soils and grassland near the autobahn. Near the motorway, increased concentrations of inorganic and organic pollutants were found, depending on distance, both in soil and in grassland. The decreased soil life is also attributed to this. (orig.) [de
Crude oil derived petroleum products in the aquatic environment: priorities for control
International Nuclear Information System (INIS)
Grimwood, M.J.
2001-01-01
The available data on the environmental fate, behaviour and toxicity of five groups of petroleum products is reviewed and the information used to identify the priority of oil products for pollution control to protect the aquatic environment. The oil product groups comprise gasolines, kerosenes, other light fuel oil distillates, residual heavy fuel oils and lubricating oils. (author)
Welcome to Inorganics: A New Open Access, Inclusive Forum for Inorganic Chemistry
Directory of Open Access Journals (Sweden)
Duncan H. Gregory
2013-06-01
Full Text Available One of the beauties of inorganic chemistry is its sheer diversity. Just as chemistry sits at the centre of the sciences, inorganic chemistry sits at the centre of chemistry itself. Inorganic chemists are fortunate in having the entire periodic table at their disposal, providing a palette for the creation of a multitude of rich and diverse compounds and materials from the simplest salts to the most complex of molecular species. It follows that the language of inorganic chemistry can thus be a demanding one, accommodating sub-disciplines with very different perspectives and frames of reference. One could argue that it is the unequivocal breadth of inorganic chemistry that empowers inorganic chemists to work at the interfaces, not just between the traditional Inorganic-Organic-Physical boundaries of the discipline, but in the regions where chemistry borders the other physical and life sciences, engineering and socio-economics. [...
Research on numerical method for multiple pollution source discharge and optimal reduction program
Li, Mingchang; Dai, Mingxin; Zhou, Bin; Zou, Bin
2018-03-01
In this paper, the optimal method for reduction program is proposed by the nonlinear optimal algorithms named that genetic algorithm. The four main rivers in Jiangsu province, China are selected for reducing the environmental pollution in nearshore district. Dissolved inorganic nitrogen (DIN) is studied as the only pollutant. The environmental status and standard in the nearshore district is used to reduce the discharge of multiple river pollutant. The research results of reduction program are the basis of marine environmental management.
Monitoring of priority pollutants in dynamic stormwater discharges from urban areas
DEFF Research Database (Denmark)
Birch, Heidi
The European Water Framework Directive (WFD) from 2000 has put focus on the chemical status of surface waters by the specified Environmental Quality Standard (EQSs) and the requirements for monitoring of surface water quality throughout Europe. When considering the water quality of urban stormwater...... runoff it is evident that surface waters receiving large amount of urban stormwater runoff will be at risk of failing to meet the EQSs. Therefore stormwater treatment is crucial. However, as stormwater quality varies orders of magnitude between sites, stormwater monitoring is important in order to design...... discharges. Sorption of pollutants to particulate matter and dissolved organic carbon is important for both the toxicity of the pollutants and for removal in stormwater treatment systems. Furthermore sorption is important for sampling using the most common types of passive samplers, which are based on uptake...
Recent Trend on Bioremediation of Polluted Salty Soils and Waters Using Haloarchaea
Aracil-Gisbert, Sonia; Torregrosa-Crespo, Javier; Martínez-Espinosa, Rosa María
2018-01-01
Pollution of soils, sediments, and groundwater is a matter of concern at global level. Industrial waste effluents have damaged several environments; thus, pollutant removal has become a priority worldwide. Currently, bioremediation has emerged as an effective solution for these problems, and, indeed, the use of haloarchaea in bioremediation has been tested successfully. A bibliographic review is here presented to show the recent advances in bioremediation of polluted soil and wastewater using...
Environmental Pollution and the Future of Man's Earth
Fisher, Joseph L.
1971-01-01
A sense of priorities concerning pollution problems needs to be established, on the basis of their seriousness. Combinations of incentive and regulation approaches can be utilized, with the main objective being to expand the dimension of responsibility for environmental quality. (SD)
Directory of Open Access Journals (Sweden)
Pramaningsih Vita
2018-01-01
Full Text Available Water Pollution in Karang Mumus River caused society behavior along the river. Daily activity such as bath, washing and defecate at the river. Garbage, sediment, domestic waste and flood are river problems should be solved. Purpose this research is make strategy of water pollution control in the Karang Mumus River. Method used observation in the field, interview to the society, industry, public activity along the river and government of environment department. Further create data using tool of Analysis Hierarchy Process (AHP to get the strategy to control water pollution in the river. Actors have contribute pollution control are government, industry and society. Criteria to pollution control are society participation, low, human resources and sustainable. Alternative of pollution control are unit garbage storage; license loyalty for industry and waste; communal waste water installation; monitoring of water quality. Result for actor priority are government (0.4; Industry (0.4; Society (0.2. Result for priority criteria are society participation (0.338, low (0.288, human resources (0.205 and sustainable (0.169. Result for priority alternative are unit garbage storage (0.433; license loyalty for industry and waste (0.238; communal waste water installation (0.169; monitoring of water quality (0.161.
Pramaningsih, Vita; Suprayogi, Slamet; Purnama, Setyawan
2018-02-01
Water Pollution in Karang Mumus River caused society behavior along the river. Daily activity such as bath, washing and defecate at the river. Garbage, sediment, domestic waste and flood are river problems should be solved. Purpose this research is make strategy of water pollution control in the Karang Mumus River. Method used observation in the field, interview to the society, industry, public activity along the river and government of environment department. Further create data using tool of Analysis Hierarchy Process (AHP) to get the strategy to control water pollution in the river. Actors have contribute pollution control are government, industry and society. Criteria to pollution control are society participation, low, human resources and sustainable. Alternative of pollution control are unit garbage storage; license loyalty for industry and waste; communal waste water installation; monitoring of water quality. Result for actor priority are government (0.4); Industry (0.4); Society (0.2). Result for priority criteria are society participation (0.338), low (0.288), human resources (0.205) and sustainable (0.169). Result for priority alternative are unit garbage storage (0.433); license loyalty for industry and waste (0.238); communal waste water installation (0.169); monitoring of water quality (0.161).
Seiler Pollution Control Systems vitrification process for the treatment of hazardous waste streams
International Nuclear Information System (INIS)
Nuesch, P.C.; Sarko, A.B.
1995-01-01
Seiler Pollution Control Systems, Inc. (Seiler) applies an economical, transportable, compact high temperature vitrification process to recycle and/or stabilize mixed organic/inorganic waste streams. Organic components are gasified by the system and are used as an auxiliary energy source. The inorganic components are melted and bound up molecularly in a glass/ceramic matrix. These glass/ceramics are extremely stable and durable and will pass typical regulatory leachate tests. Waste types that can be processed through the Seiler vitrification system include incinerator flyash, paint sludges, plating wastes, metal hydroxide sludges, low level and mixed radioactive wastes, contaminated soils and sludges, asbestos, and various mixed organic/inorganic residues. For nonradioactive waste streams, a variety of commercially saleable glass/ceramic products can be produced. These materials are marketed either as architectural materials, abrasives, or insulating refractories. The glass/ceramics generated from radioactive waste streams can be formed in a shape that is easily handled, stored, and retrieved. The system, itself is modular and can either be used as a stand alone system or hooked-up in line to existing manufacturing and production facilities. It consists of four sections: feed preparation; preheater; vitrifier/converter, and air pollution control. The vitrification system can use oxygen enriched natural gas or fuel oil for both cost efficiency and to reduce air pollution emissions
The Clean Water Act (CWA) Action Plan Implementation Priorities describes the new approaches to revamp the National Pollutant Discharge Elimination System (NPDES) permitting, compliance and enforcement program.Issued May 11, 2011
Health effects associated with exposure to ambient air pollution.
Samet, Jonathan; Krewski, Daniel
2007-02-01
The World Health Organization has identified ambient air pollution as a high public health priority, based on estimates of air pollution related death and disability-adjusted life years derived in its Global Burden of Disease initiative. The NERAM Colloquium Series on Health and Air Quality was initiated to strengthen the linkage between scientists, policymakers, and other stakeholders by reviewing the current state of science, identifying policy-relevant gaps and uncertainties in the scientific evidence, and proposing a path forward for research and policy to improve air quality and public health. The objective of this paper is to review the current state of science addressing the impacts of air pollution on human health. The paper is one of four background papers prepared for the 2003 NERAM/AirNet Conference on Strategies for Clean Air and Health, the third meeting in the international Colloquium Series. The review is based on the framework and findings of the U.S. National Research Committee (NRC) on Research Priorities for Airborne Particulate Matter and addresses key questions underlying air quality risk management policy decisions.
Prioritizing research for trace pollutants and emerging contaminants in the freshwater environment
Energy Technology Data Exchange (ETDEWEB)
Murray, Kyle E., E-mail: Kyle.Murray@utsa.ed [Center for Water Research, University of Texas at San Antonio, One UTSA Circle, San Antonio, TX 78249-0663 (United States); Thomas, Sheeba M [San Antonio River Authority, San Antonio, TX (United States); Bodour, Adria A [Air Force Center for Engineering and the Environment (AFCEE), Brooks City-Base, TX (United States)
2010-12-15
Organic chemicals have been detected at trace concentrations in the freshwater environment for decades. Though the term trace pollutant indicates low concentrations normally in the nanogram or microgram per liter range, many of these pollutants can exceed an acceptable daily intake (ADI) for humans. Trace pollutants referred to as emerging contaminants (ECs) have recently been detected in the freshwater environment and may have adverse human health effects. Analytical techniques continue to improve; therefore, the number and frequency of detections of ECs are increasing. It is difficult for regulators to restrict use of pollutants that are a human health hazard; scientists to improve treatment techniques for higher priority pollutants; and the public to modify consumption patterns due to the vast number of ECs and the breadth of literature on the occurrence, use, and toxicity. Hence, this paper examines literature containing occurrence and toxicity data for three broad classes of trace pollutants and ECs (industrials, pesticides, and pharmaceuticals and personal care products (PPCPs)), and assesses the relevance of 71 individual compounds. The evaluation indicates that widely used industrials (BPF) and PPCPs (AHTN, HHCB, ibuprofen, and estriol) occur frequently in samples from the freshwater environment but toxicity data were not available; thus, it is important to establish their ADI. Other widely used industrials (BDE-47, BDE-99) and pesticides (benomyl, carbendazim, aldrin, endrin, ethion, malathion, biphenthrin, and cypermethrin) have established ADI values but occurrence in the freshwater environment was not well documented. The highest priority pollutants for regulation and treatment should include industrials (PFOA, PFOS and DEHP), pesticides (diazinon, methoxychlor, and dieldrin), and PPCPs (EE2, carbamazepine, {beta}E2, DEET, triclosan, acetaminophen, and E1) because they occur frequently in the freshwater environment and pose a human health hazard at
Prioritizing research for trace pollutants and emerging contaminants in the freshwater environment
International Nuclear Information System (INIS)
Murray, Kyle E.; Thomas, Sheeba M.; Bodour, Adria A.
2010-01-01
Organic chemicals have been detected at trace concentrations in the freshwater environment for decades. Though the term trace pollutant indicates low concentrations normally in the nanogram or microgram per liter range, many of these pollutants can exceed an acceptable daily intake (ADI) for humans. Trace pollutants referred to as emerging contaminants (ECs) have recently been detected in the freshwater environment and may have adverse human health effects. Analytical techniques continue to improve; therefore, the number and frequency of detections of ECs are increasing. It is difficult for regulators to restrict use of pollutants that are a human health hazard; scientists to improve treatment techniques for higher priority pollutants; and the public to modify consumption patterns due to the vast number of ECs and the breadth of literature on the occurrence, use, and toxicity. Hence, this paper examines literature containing occurrence and toxicity data for three broad classes of trace pollutants and ECs (industrials, pesticides, and pharmaceuticals and personal care products (PPCPs)), and assesses the relevance of 71 individual compounds. The evaluation indicates that widely used industrials (BPF) and PPCPs (AHTN, HHCB, ibuprofen, and estriol) occur frequently in samples from the freshwater environment but toxicity data were not available; thus, it is important to establish their ADI. Other widely used industrials (BDE-47, BDE-99) and pesticides (benomyl, carbendazim, aldrin, endrin, ethion, malathion, biphenthrin, and cypermethrin) have established ADI values but occurrence in the freshwater environment was not well documented. The highest priority pollutants for regulation and treatment should include industrials (PFOA, PFOS and DEHP), pesticides (diazinon, methoxychlor, and dieldrin), and PPCPs (EE2, carbamazepine, βE2, DEET, triclosan, acetaminophen, and E1) because they occur frequently in the freshwater environment and pose a human health hazard at
International Nuclear Information System (INIS)
Ali, N.A.; El-Tamany, E.H.; El-Emary, M.M.
2011-01-01
The main objective of the present work is to perform a comparative laboratory study using an adsorption technique for oil removal from the waste water drained to sea from refineries, offshore and/or onshore petroleum installations. Different crushed adsorbent materials, namely, cotton fibers, charcoal, petroleum coke, agriculture wastes (such as, rice straws, wheat stems, milled dry leaves and lignin), inorganic adsorbents (such as sand, and bricks) and a marine Product (such as sponge) are included in this study. They were tested for oil recovery from laboratory prepared oily salt water samples. Two different Egyptian crude oils varying in their properties and several refined products (gasoline, kerosene, gas oil, diesel oil, fuel oil, lubricating oil) and skimmed oil were employed. Their adsorptive efficiencies were tested. Good results were obtained with sponge and cotton fibers. The used agricultural wastes show better adsorption compared with coke and inorganic adsorbents.
Inorganic aerosols responses to emission changes in Yangtze River Delta, China.
Dong, Xinyi; Li, Juan; Fu, Joshua S; Gao, Yang; Huang, Kan; Zhuang, Guoshun
2014-05-15
The new Chinese National Ambient Air Quality standards (CH-NAAQS) published on Feb. 29th, 2012 listed PM2.5 as criteria pollutant for the very first time. In order to probe into PM2.5 pollution over Yangtze River Delta, the integrated MM5/CMAQ modeling system is applied for a full year simulation to examine the PM2.5 concentration and seasonality, and also the inorganic aerosols responses to precursor emission changes. Total PM2.5 concentration over YRD was found to have strong seasonal variation with higher values in winter months (up to 89.9 μg/m(3) in January) and lower values in summer months (down to 28.8 μg/m(3) in July). Inorganic aerosols were found to have substantial contribution to PM2.5 over YRD, ranging from 37.1% in November to 52.8% in May. Nocturnal production of nitrate (NO3(-)) through heterogeneous hydrolysis of N2O5 was found significantly contribute to high NO3(-) concentration throughout the year. In winter, NO3(-) was found to increase under nitrogen oxides (NOx) emission reduction due to higher production of N2O5 from the excessive ozone (O3) introduced by attenuated titration, which further lead to increase of ammonium (NH4(+)) and sulfate (SO4(2-)), while other seasons showed decrease response of NO3(-). Sensitivity responses of NO3(-) under anthropogenic VOC emission reduction was examined and demonstrated that in urban areas over YRD, NO3(-) formation was actually more sensitive to VOC than NOx due to the O3-involved nighttime chemistry of N2O5, while a reduction of NOx emission may have counter-intuitive effect by increasing concentrations of inorganic aerosols. Copyright © 2014 Elsevier B.V. All rights reserved.
Impact of Acidification on Pollutants Fate and Soil Filtration Function
Directory of Open Access Journals (Sweden)
Jarmila Makovniková
2014-12-01
Full Text Available The objective of this paper was to investigate the effects of simulated acid load on the fate of inorganic pollutants (Cd, Pb, soil sorption potential, soil filtration func-tion. We made use of a short-term acidification pot experiment with grown plant of spring barley cultivated at 4 different soil types (Fluvisol, Cambisol, Stagnosol, Podzol. The potential of soil filtration was evaluated according to the Eq.: [Soil filtration function]=[Potential of soil sorbents]+[Potential of total content of inor-ganic pollutants]. Potential of soil sorbents (PSS is defined by qualitative (pH, or-ganic matter quality - A400/600 and quantitative factors (carbon content-Cox, humus layer thickness-H according to the Eq.:[PSS]=F(pH+F(A465/665+F(Cox*F(H. Acid load significantly influenced soil sorption potential and thus affected increase in Cd and Pb mobility what was reflected in their transfer into the plants. Results of soil filtration function showed significant change of filtration function in Cambisol.
Mixtures of organic and inorganic substrates, particle size and proportion.
Directory of Open Access Journals (Sweden)
Emilio Raymundo Morales-Maldonado
2015-06-01
Full Text Available The objective of this paper was to review the mixtures of organic and inorganic materials used in the preparation of a new material, particle size, proportion, and their response in plant. In Mexico, agricultural waste is considered as a pollutant reservoir; however, from another perspective, this represents an industry with great potential. The nutrients ingested by animals represent nutriments available for plants when properly recycled. An option that minimizes the risk of contamination and improves its quality is the production of compost and vermicompost. Both processes are an alternative to organic production. A material by itself does not meet the optimum conditions. Reducing the volume of an organic material increases compaction and compression of roots, affecting the efficiency of irrigation and fertilization, so it is necessary to make mixtures with inorganic materials, that is used in the development of a new material for better growing conditions of the plant.
Soil aquifer treatment to remove priority organic pollutants in the Llobregat river area
Huerta, Maria; Solé, Josep; Aceves, Mercè; Valhondo González, Cristina; Hernández, Marta; Gullón Santos, Martín
2013-01-01
The Llobregat River is the main source of water supply in this area. This river together with its aquifer has suffered from several damages which had contributed to endanger a suitable ecological and hydrological status; among them, pollution is a serious problem to deal with. In the last decades, the presence of organic pollutants in this river has been demonstrated [1,2]. Some of them are persistent to biological degradation and have shown to survive wastewater treatments almost unaltered a...
Setting priorities for research on pollution reduction functions of agricultural buffers
Michael G. Dosskey
2002-01-01
The success of buffer installation initiatives and programs to reduce nonpoint source pollution of streams on agricultural lands will depend the ability of local planners to locate and design buffers for specific circumstances with substantial and predictable results. Current predictive capabilities are inadequate, and major sources of uncertainty remain. An...
Source apportionment of toxic chemical pollutants at Trombay region
International Nuclear Information System (INIS)
Sahu, S.K.; Pandit, G.G.; Puranik, V.D.
2007-05-01
Anthropogenic activities like industrial production and transportation, a wide range of chemical pollutants such as trace and toxic metals, pesticides, polycyclic aromatic hydrocarbons etc. eventually find their way into various environmental compartments. One of the main issues of environmental pollution is the chemical composition of aerosols and their sources. In spite of all the efforts a considerable part of the atmospheric aerosol mass is still not accounted for. This report describes some of the activities of Environmental Assessment Division which are having direct relevance to the public health and regulatory bodies. Extensive studies were carried out in our laboratories for the Trombay site, over the years; on the organic as well as inorganic pollution in the environment to understand inter compartmental behaviour of these chemical pollutants. In this report an attempt has been made to collect different size fractionated ambient aerosols and to quantify the percentage contribution of each size fraction to the total aerosol mass. Subsequently, an effort has been made for chemical characterization (inorganic, organic and carbon content) of these particulate matter using different analytical techniques. The comprehensive data set on chemical characterization of particulate matter thus generated is being used with receptor modeling techniques to identify the possible sources contributing to the observed concentrations of the measured pollutants. The use of this comprehensive data set in receptor modeling has been helpful in distinguishing the source types in a better way. Receptor modeling techniques are powerful tools that can be used to locate sources of pollutants to the atmosphere. The major advantage of the receptor models is that actual ambient data are used to apportion source contributions, negating the need for dispersion calculations. Pollution sources affecting the sampling site were statistically identified using varimax rotated factor analysis of
[Development and current status of atmospheric pollution].
Elichegaray, C; Bouallala, S; Maitre, A; Ba, M
2009-02-01
Air quality is a public health issue and this article includes a reminder of the related causes and issues and a description of the monitoring of ambient air quality in France. It also provides a review of major developments in recent years of the pollutants measured. Emissions of major air pollutants have declined significantly since the 1970s, and this is reflected in an overall improvement in the quality of ambient air. Nevertheless, various forms of air pollution remain a concern (in the case of photochemical pollution) and health data show that air pollution is still a cause of morbidity and mortality. The fight against air pollution must remain a priority and requires multi-pollutant and multi-effect approaches. The National Health and Environment Program adopted during the Grenelle environment stakeholder consultation processes includes targets for reducing human exposure to air pollution, especially particulate matter, as well as measures to improve indoor air quality. In a context dominated by the struggle against the emission of greenhouse gases, problems of air quality should not be underestimated and policies relating to climate protection must be taken into account.
Health and household air pollution from solid fuel use: the need for improved exposure assessment.
Clark, Maggie L; Peel, Jennifer L; Balakrishnan, Kalpana; Breysse, Patrick N; Chillrud, Steven N; Naeher, Luke P; Rodes, Charles E; Vette, Alan F; Balbus, John M
2013-10-01
Nearly 3 billion people worldwide rely on solid fuel combustion to meet basic household energy needs. The resulting exposure to air pollution causes an estimated 4.5% of the global burden of disease. Large variability and a lack of resources for research and development have resulted in highly uncertain exposure estimates. We sought to identify research priorities for exposure assessment that will more accurately and precisely define exposure-response relationships of household air pollution necessary to inform future cleaner-burning cookstove dissemination programs. As part of an international workshop in May 2011, an expert group characterized the state of the science and developed recommendations for exposure assessment of household air pollution. The following priority research areas were identified to explain variability and reduce uncertainty of household air pollution exposure measurements: improved characterization of spatial and temporal variability for studies examining both short- and long-term health effects; development and validation of measurement technology and approaches to conduct complex exposure assessments in resource-limited settings with a large range of pollutant concentrations; and development and validation of biomarkers for estimating dose. Addressing these priority research areas, which will inherently require an increased allocation of resources for cookstove research, will lead to better characterization of exposure-response relationships. Although the type and extent of exposure assessment will necessarily depend on the goal and design of the cookstove study, without improved understanding of exposure-response relationships, the level of air pollution reduction necessary to meet the health targets of cookstove interventions will remain uncertain.
Energy Technology Data Exchange (ETDEWEB)
Ince, M; Wheatley, A [Loughborough Univ. of Technology (United Kingdom). Dept. of Civil Engineering
1997-12-31
The contents are involvement of the European community, integration of research and development programmes ; surface water quality and pollution incidents; surface water pollution in the UK ; eutrophication ; drinking water quality ; causes and current treatment for removal of pollutants ; future causes of water pollution ; and , water and wastewater research.
International Nuclear Information System (INIS)
Ince, M.; Wheatley, A.
1996-01-01
The contents are involvement of the European community, integration of research and development programmes ; surface water quality and pollution incidents; surface water pollution in the UK ; eutrophication ; drinking water quality ; causes and current treatment for removal of pollutants ; future causes of water pollution ; and , water and wastewater research
The orientation, principles, priorities and aims of the state environmental policy
International Nuclear Information System (INIS)
1998-01-01
This chapter contains: (A) The orientation and priorities of state environmental policy of the government of the Slovak Republic which were approved 18 November 1993 by the resolution No 339. On the basis of the Strategy, principles and priorities of state environmental policy 70 short-terminable aims up to 1996, next 59 middle-terminable of aims up to years 2000 - 2010 and 33 general and partial long-terminable aims up to 2030 and longer were formulated. The Strategy is determined by next 5 branches oriented priorities: (1) air protection before pollutants and the global environmental safety; (2) organization of sufficiency of drinking water and decreasing of pollution of other waters under permissible limits; (3) soil protection before degeneration and organization of non-defected food-stuffs and other wares; (4) minimization of formation, use and good waste liquidate; (5) preservation of bio-diversity, preservation and rational use of natural reserves and optimization of place structure and use of the country. (B) The principles and priorities of state environmental policy determinate implementation and observance of then principles of the state environmental policy. (C) Total 162 aims of the Strategy of the state environmental policy and next followed programs, projects and measures of the environmental policy of the Slovak Republic can be grouped into 4 blocks: (1) the environmental policy in the protection of air, water and before of risk factors, in the nuclear safety and waste economy (environmental safety; (2) the environmental policy in protection of the nature and the country, protection and use of mineral surroundings, soils and forest;; (3) the environmental policy in the economy; (4) the environmental policy in the guidance, education, public information, organization, control and coordination of the ministration on the environment. These aims are grouped into 10 sectors. (D) The government of the Slovak republic has first National environmental
Permeable reactive barriers for pollutant removal from groundwater
International Nuclear Information System (INIS)
Simon, F.G.; Meggyes, T.
2001-01-01
The removal of pollutants from the groundwater using permeable reactive barriers is a novel in-situ groundwater remediation technology. The most relevant decontamination processes used are chemical reduction, oxidation, precipitation and sorption, for which examples are given. Some common organic pollutants are halogenated hydrocarbons, aromatic and nitroaromatic compounds which can be treated in reactive barriers successfully. Lead, chromium and, in particular, uranium are dealt with in great detail among inorganic pollutants because of their occurrence in many European countries. Construction methods for cut-off walls and reactive barriers exhibit similar features. Apart from conventional methods, drilling, deep soil mixing, jet technology, arrays of wells, injected systems and biobarriers are applied to construct permeable reactive barriers. Permeable reactive barriers bear great potential for the future in remediation engineering. (orig.)
Pollutants in drinking water - sources, harmful effects and removal procedures
International Nuclear Information System (INIS)
Qadeer, R.
2005-01-01
The underground water resources available for human consumption are being continuously contaminated by the natural sources and anthropogenic activities. The pollutants include toxic microorganism, inorganic and organic chemicals and radionuclide etc. This is an acute problem in our country, where free style way of disposal of industrial effluents into the natural water bodies contaminates the surface and ground water. These contaminants make their way into human body through contaminated drinking water, which leads to the malfunctioning of the body organs. Details of some pollutants present in drinking water, their source and harmful effects on human beings are reviewed in this communication Merits and demerits of methods used to remove the pollutants from drinking water are also discussed. (author)
[Preliminary determination of organic pollutants in agricultural fertilizers].
Mo, Ce-hui; Li, Yun-hui; Cai, Quan-ying; Zeng, Qiao-yun; Wang, Bo-guang; Li, Hai-qin
2005-05-01
Organic pollutants such as polycyclic aromatic hydrocarbons (PAHs) in agricultural fertilizers are new problem deserved more study. Eight kinds of organic pollutants including 43 compounds classified as US EPA priority pollutants in twenty one agricultural fertilizers which were universally used in China were determined by Gas chromatography-mass spectrum (GC-MS). Three kinds of organic pollutants including more than 5 compounds were detected in most fertilizers, composing mainly of phthalic acid esters (PAEs), nitrobenzenes (NBs) and polycyclic aromatic hydrocarbons (PAHs). There were 26 compounds detected in at least one fertilizer, five of them especially PAEs detected in most fertilizer and even in all fertilizers. Benzo(a)pyrene, a strongly carcinogenic compound was detected in two fertilizers. Higher concentrations of compounds were determined in those fertilizers such as multifunction compound fertilizers and coated fertilizers.
Pressures on industry to move to pollution prevention
International Nuclear Information System (INIS)
Poiasek, R.B.
1991-01-01
In a recent EPA report entitled Reducing Risk: Sorting Priorities and Strategies for Environmental Protection, a recommendation was made that EPA should emphasize pollution prevention as the preferred option for reducing risk. A significant number of states have adopted legislation requiring industry to conduct pollution prevention planning activities and submit reports to the state agencies. Federal legislation may be on the way. Industrial trade organizations are looking at the Chemical Manufacturing Association's Responsible Care: Program. Institutional investment groups are looking at initiatives like the Valdez Principles when selecting its portfolio, each of these initiatives have pollution prevention components. Environmentalists are demanding further attention be paid to pollution prevention. Industry is responding with a variety of programs designed to move them away from the classic end-of-the pipe controls which EPA mandated in previous regulations
Emission of toxic air pollutants from biomass combustion
International Nuclear Information System (INIS)
Houck, J.E.; Barnett, S.G.; Roholt, R.B.; Rock, M.E.
1991-01-01
Combustion of biomass for power generation, home heating, process steam generation, and waste disposal constitutes a major source of air pollutants nationwide. Emissions from hog-fueled boilers, demolition wood-fired power plants, municipal waste incinerators, woodstoves, fireplaces, pellet stoves, agricultural burning, and forestry burning have been characterized for a variety of purposes. These have included risk assessment, permitting, emission inventory development, source profiling for receptor modeling, and control technology evaluations. From the results of the source characterization studies a compilation of emission factors for criteria and non-criteria pollutants are presented here. Key among these pollutants are polycyclic aromatic hydrocarbons, priority pollutant metals, carbon monoxide, sulfur dioxide, nitrous oxides, and PM 10 particles. The emission factors from the biomass combustion processes are compared and contrasted with other pollutant sources. In addition, sampling and analysis procedures most appropriate for characterizing emissions from the biomass combustion sources are also discussed
2012-09-20
... Hanover County Airport Burn Pit Superfund Site AGENCY: Environmental Protection Agency. ACTION: Final rule... Airport Burn Pit Superfund Site (Site) located in Wilmington, North Carolina, from the National Priorities... INFORMATION: The site to be deleted from the NPL is: New Hanover County Airport Burn Pit Superfund Site...
Risk of Air Pollution in Relation to Cancer in the Nordic Countries
DEFF Research Database (Denmark)
Fauser, Patrik; Ketzel, Matthias; Becker, Thomas
Seventeen pollutants (particles, heavy metals, inorganic gases and organic compounds) are for the first time analyzed in a screening of the carcinogenic risk at very high resolution and large scale in ambient air in the Nordic countries. Modelled 2010 annual mean air concentrations show...
International Nuclear Information System (INIS)
Wilson, Rachel Marie; Kucklick, John R.; Balmer, Brian C.; Wells, Randall S.; Chanton, Jeffrey P.; Nowacek, Douglas P.
2012-01-01
Differences in priority organic pollutants (POPs), analyzed by gas chromatography-mass spectrometry, and stable isotope ratios (δ 13 C, δ 34 S, and δ 15 N; analyzed by isotope ratio-mass spectrometry), divide 77 bottlenose dolphins (Tursiops truncatus) from the Florida Gulf Coast into three distinct groups. POP levels reflect human population and historical contamination along the coast. In the least disturbed site, concentrations of ΣPOP in male dolphins were 18,000 ng g −1 ± 6000 (95% confidence interval here and throughout); in the intermediate bay, males had ΣPOP concentrations of 19,000 ng g −1 ± 10,000. St Andrews Bay was home to dolphins with the highest ΣPOP concentrations: 44,000 ng g −1 ± 10,300. δ 34 S and δ 15 N, differed significantly between St. George Sound dolphins and those frequenting each of the other two bays, but not between St. Andrews and St. Joseph Bays. ΣPOP concentrations were statistically higher in dolphins frequenting St. Andrews Bay, but were not significantly different between dolphins occupying St. Joseph Bay and St. George Sound. Thus, using either POP or isotope values alone, we would only be able to identify two dolphin groups, but when POP and isotope data are viewed cumulatively, the results clearly define three distinct communities occupying this region. - Highlights: ► We compare isotopes and POP levels in dolphins occupying three embayments. ► POP levels varied significantly among two embayments separated by < 50 km. ► Differentiation correlated with historical contamination from a SuperFund site. ► Cumulatively, isotopes and POP levels indicate 3 distinct dolphin communities. ► This data provides the first assessment of dolphin POP contamination in the region.
Energy Technology Data Exchange (ETDEWEB)
Wilson, Rachel Marie, E-mail: ryounge@ocean.fsu.edu [Department of EOAS-Oceanography, Florida State University, 117 North Woodward Avenue, Tallahassee, Florida, 32306 (United States); Kucklick, John R. [National Institute of Standards and Technology, Hollings Marine Laboratory, Charleston, 331 Fort Johnson Road, Charleston, South Carolina 29412 (United States); Balmer, Brian C.; Wells, Randall S. [Chicago Zoological Society c/o Mote Marine Laboratory, 1600 Ken Thompson Parkway Sarasota, FL, 34236 (United States); Chanton, Jeffrey P. [Department of EOAS-Oceanography, Florida State University, 117 North Woodward Avenue, Tallahassee, Florida, 32306 (United States); Nowacek, Douglas P. [Nicholas School of the Environment and Pratt School of Engineering, Duke University - Marine Laboratory, 135 Duke Marine Lab Rd., Beaufort, NC 28516 (United States)
2012-05-15
Differences in priority organic pollutants (POPs), analyzed by gas chromatography-mass spectrometry, and stable isotope ratios ({delta}{sup 13}C, {delta}{sup 34}S, and {delta}{sup 15}N; analyzed by isotope ratio-mass spectrometry), divide 77 bottlenose dolphins (Tursiops truncatus) from the Florida Gulf Coast into three distinct groups. POP levels reflect human population and historical contamination along the coast. In the least disturbed site, concentrations of {Sigma}POP in male dolphins were 18,000 ng g{sup -1} {+-} 6000 (95% confidence interval here and throughout); in the intermediate bay, males had {Sigma}POP concentrations of 19,000 ng g{sup -1} {+-} 10,000. St Andrews Bay was home to dolphins with the highest {Sigma}POP concentrations: 44,000 ng g{sup -1} {+-} 10,300. {delta}{sup 34}S and {delta}{sup 15}N, differed significantly between St. George Sound dolphins and those frequenting each of the other two bays, but not between St. Andrews and St. Joseph Bays. {Sigma}POP concentrations were statistically higher in dolphins frequenting St. Andrews Bay, but were not significantly different between dolphins occupying St. Joseph Bay and St. George Sound. Thus, using either POP or isotope values alone, we would only be able to identify two dolphin groups, but when POP and isotope data are viewed cumulatively, the results clearly define three distinct communities occupying this region. - Highlights: Black-Right-Pointing-Pointer We compare isotopes and POP levels in dolphins occupying three embayments. Black-Right-Pointing-Pointer POP levels varied significantly among two embayments separated by < 50 km. Black-Right-Pointing-Pointer Differentiation correlated with historical contamination from a SuperFund site. Black-Right-Pointing-Pointer Cumulatively, isotopes and POP levels indicate 3 distinct dolphin communities. Black-Right-Pointing-Pointer This data provides the first assessment of dolphin POP contamination in the region.
Directory of Open Access Journals (Sweden)
Eloísa Berbel Manaia
2013-06-01
Full Text Available Nowadays, concern over skin cancer has been growing more and more, especially in tropical countries where the incidence of UVA/B radiation is higher. The correct use of sunscreen is the most efficient way to prevent the development of this disease. The ingredients of sunscreen can be organic and/or inorganic sun filters. Inorganic filters present some advantages over organic filters, such as photostability, non-irritability and broad spectrum protection. Nevertheless, inorganic filters have a whitening effect in sunscreen formulations owing to the high refractive index, decreasing their esthetic appeal. Many techniques have been developed to overcome this problem and among them, the use of nanotechnology stands out. The estimated amount of nanomaterial in use must increase from 2000 tons in 2004 to a projected 58000 tons in 2020. In this context, this article aims to analyze critically both the different features of the production of inorganic filters (synthesis routes proposed in recent years and the permeability, the safety and other characteristics of the new generation of inorganic filters.
Effect of environmental air pollution on cardiovascular diseases.
Meo, S A; Suraya, F
2015-12-01
Environmental air pollution has become a leading health concern especially in the developing countries with more urbanization, industrialization and rapidly growing population. Prolonged exposure to air pollution is a risk factor for cardiovascular diseases. The present study aimed to investigate the effects of environmental air pollution on progression of cardiovascular problems. In this study, we identified 6880 published articles through a systematic database including ISI-Web of Science, PubMed and EMBASE. The allied literature was searched by using the key words such as environmental pollution, air pollution, particulate matter pollutants PM 2.5 μm-PM 10 μm. Literature in which environmental air pollution and cardiac diseases were discussed was included. Descriptive information was retrieved from the selected literature. Finally, we included 67 publications and remaining studies were excluded. Environmental pollution can cause high blood pressure, arrhythmias, enhanced coagulation, thrombosis, acute arterial vasoconstriction, atherosclerosis, ischemic heart diseases, myocardial infarction and even heart failure. Environmental air pollution is associated with increased risk of cardiovascular diseases. Environmental pollution exerts its detrimental effects on the heart by developing pulmonary inflammation, systemic inflammation, oxidative stress, endothelial dysfunction and prothrombotic changes. Environmental protection officials must take high priority steps to minimize the air pollution to decrease the prevalence of cardiovascular diseases.
Reactive transport modeling of coupled inorganic and organic processes in groundwater
Energy Technology Data Exchange (ETDEWEB)
Brun, Adam
1997-12-31
The main goals of this project are to develop and apply a reactive transport code for simulation of coupled organic and inorganic processes in the pollution plume in the ground water down-gradient from the Vejen landfill, Denmark. The detailed field investigations in this aquifer have previously revealed a complex pattern of strongly interdependent organic and inorganic processes. These processes occur simultaneously in a flow and transport system where the mixing of reactive species is influenced by the rather complex geology in the vicinity of the landfill. The removal of organic matter is influenced by the presence of various electron acceptors that also are involved in various inorganic geochemical reactions. It was concluded from the investigations that degradation of organic matter, complexation, mineral precipitation and dissolution, ion-exchange and inorganic redox reactions, as a minimum, should be included in the formulation of the model. The coupling of the organic and inorganic processes is developed based on a literature study. All inorganic processes are as an approximation described as equilibriumm processes. The organic processes are described by a maximum degradation rate that is decreased according to the availability of the participants in the processes, the actual pH, and the presence of inhibiting species. The reactive transport code consists of three separate codes, a flow and transport code, a geochemical code, and a biodegradation code. An iterative solution scheme couples the three codes. The coupled code was successfully verified for simple problems for which analytical solutions exist. For more complex problems the code was tested on synthetic cases and expected plume behavior was successfully simulated. Application of the code to the Vejen landfill aquifer was successful to the degree that the redox zonation down-gradient from the landfill was simulated correctly and that several of the simulated plumes showed a reasonable agreement with
Kolebuk, Tomasz; Madej, Daniel; Pieniążek, Rafał; Bilek, Maciej
2015-01-01
Legislation for environmentally protecting surface waters in Poland and the EU is considered a priority because of the large human impact on this environmental feature in both highly industrialised countries as well as those that are agriculturally well developed. The biggest threats are regarded as being sewage arising from economic, industrial and agricultural pollution along with rain water run-off from fields treated with fertilizers. One of the most characteristic indicators of pollution exposure in surface waters are inorganic anions which form the principal components of town sew- age and fertilizers. The estimate the effect that six selected sites of human settlement have on variously sized watercourses running through. The human environmental impact was based on determination of chlorides, nitrates and sulphates concentrations in such waters. Water samples were obtained from the following rivers and towns, respectively; the Nil in Kolbuszowa, the Mleczka in Przeworsk, the San in Jaroslaw, the Wislok in Rzeszow, the Bystrzyca in Olimpow and an unnamed watercourse in Niwiska. Sampling sites were chosen at 4-6 points along each watercourse for a given locality. Analyte levels were measured by ion chromatography using the Dionex ICS 1000 instrument. Mean chlorides concentrations were found to vary from 8.52 (±0.17, n=3) mg/L to 78.41 (±0.19, n=3) mg/L, mean nitrates were 6.76 (±0.00, n=3) mg/L to 23.97 (±1.50, n=3) mg/L and mean sulphates from 29.89 (±1.57, n=3) mg/L to 62.48 (±2.99, n=3) mg/L. The clearest environmental effect of settlements on watercourses were observed for the small to medium sized towns of Kolbuszowa, Przeworsk and Jaroslaw in the form of frequently elevated chlorides levels from sewage. By designating various sampling locations, along the watercourses for measuring the human environmental impact of nearby settlements, it is possible to identify sources of river pollution and thus take appropriate remedial action, as and when
Müller, Werner E G; Schröder, Heinz C; Schroder, Heinz C
2014-01-01
In recent years, inorganic polymers have attracted much attention in nano-biomedicine, in particular in the area of regenerative medicine and drug delivery. This growing interest in inorganic polymers has been further accelerated by the development of new synthetic and analytical methods in the field of nanotechnology and nanochemistry. Examples for biomedical inorganic polymers that had been proven to exhibit biomedical effects and/or have been applied in preclinical or clinical trials are polysilicate / silica glass (such as naturally formed "biosilica" and synthetic "bioglass") and inorganic polyphosphate. Some members of the mentioned biomedical inorganic polymers have already been applied e.g. as "bioglass" for bone repair and bone tissue engineering, or they are used in food processing and in dental care (inorganic polyphosphates). However, there are a number of further biological and medicinal properties of these polymers, which have been elucidated in the last few years but not yet been applied for tr...
A review of ion and metal pollutants in urban green water infrastructures.
Kabir, Md Imran; Daly, Edoardo; Maggi, Federico
2014-02-01
In urban environments, the breakdown of chemicals and pollutants, especially ions and metal compounds, can be favoured by green water infrastructures (GWIs). The overall aim of this review is to set the basis to model GWIs using deterministic approaches in contrast to empirical ones. If a better picture of chemicals and pollutant input and an improved understanding of hydrological and biogeochemical processes affecting these pollutants were known, GWIs could be designed to efficiently retain these pollutants for site-specific meteorological patterns and pollutant load. To this end, we surveyed the existing literature to retrieve a comprehensive dataset of anions and cations, and alkaline and transition metal pollutants incoming to urban environments. Based on this survey, we assessed the pollution load and ecological risk indexes for metals. The existing literature was then surveyed to review the metal retention efficiency of GWIs, and possible biogeochemical processes related to inorganic metal compounds were proposed that could be integrated in biogeochemical models of GWIs. © 2013.
Santos, Patrícia S M; Santos, Eduarda B H; Duarte, Armando C
2014-12-01
Bulk deposition can remove atmospheric organic and inorganic pollutants that may be associated with gaseous, liquid or particulate phases. To the best of our knowledge, few studies have been carried out, which simultaneously analyse the presence of organic and inorganic fractions in rainwater. In the present work, the complementarity of organic and inorganic data was assessed, through crossing data of some organic [DOC (dissolved organic carbon), absorbance at 250 nm (UV250nm), integrated fluorescence] and inorganic [H(+), NH4(+), NO3(-), non sea salt sulphate (NSS-SO4(2-))] parameters measured in bulk deposition in the coastal urban area of Aveiro. The organic and inorganic parameters analysed were positively correlated (pCDOM) came from anthropogenic sources. Furthermore, the inverse correlations observed for the organic and inorganic parameters with the precipitation amount suggest that organic and inorganic fractions were incorporated into the rainwater partially by below-cloud scavenging of airborne particulate matter. This is in accordance with the high values of DOC and NO3(-) found in samples associated with marine air masses, which were linked in part to the contribution of local emissions from vehicular traffic. DOC of bulk deposition was the predominant constituent when compared with the constituents H(+), NH4(+), NO3(-) and NSS-SO4(2-), and consequently bulk deposition flux was also highest for DOC, highlighting the importance of DOC and of anthropogenic ions being simultaneously removed from the atmosphere by bulk deposition. However, it was verified that the contribution of anthropogenic sources to the DOC of bulk deposition may be different for distinct urban areas. Thus, it is recommended that organic and inorganic fractions of bulk deposition are studied together. Copyright © 2014. Published by Elsevier Ltd.
Membrane and Adsorption Processes for Removing of Organics and Inorganics from Urban Wastewaters
Majlinda Daci-Ajvazi; Bashkim Thaçi; Nexhat Daci; Salih Gash
2016-01-01
Since in Kosovo there are still no water purification plants and untreated wastewaters are discharged in environment, in this paper we’ve studied methods for removing of different organic and inorganic pollutants from Kosovo urban wastewaters. For best results we’ve used two methods, reverse osmosis and adsorption. For reverse osmosis, all samples were pretreated with coagulant (FeSO4) and flocculant (CaO) and then treated with reverse osmosis membranes. For adsorption, we used Kosovo coal as...
Pollutants in drinking water: their sources, harmful effects and removal procedures
International Nuclear Information System (INIS)
Qadeer, R.
2004-01-01
The underground water resources available for human consumption are being continuously contaminated by the natural sources and anthropogenic activities. The pollutants include toxic microorganism, inorganic and organic chemical and radionuclide etc. this is an acute problem in our country, where free style way of disposal of industrial effluents into the natural water bodies contaminates the surface and ground water. These contaminants make their way into human body through contaminated drinking water, which leads to the malfunctioning of the body organs. Details of some pollutants present in drinking water, their source and harmful effects on human beings are reviewed in this communication. Merits and demerits of methods used to remove the pollutants from drinking water are also discussed. (author)
Causes and distribution of soil pollution in China
Directory of Open Access Journals (Sweden)
Delang Claudio O.
2017-12-01
Full Text Available China is the most populated country in the world, but has relatively little fertile land, and even less water. Maintaining the quality of its agricultural land is of paramount importance if China wants to feed its very large and growing population. Yet, China is one of the countries with the largest amount of polluted soil. This paper looks at the causes and distribution of soil pollution in China. It first looks at the amount of organic and inorganic soil pollutants and their geographic distribution. It then looks at the causes of soil pollution, making the distinction between agricultural activities, industrial activities, and urbanization. Pollution from agricultural activities stems primarily from the excessive amounts of pesticides and fertilizers used on farmland, and is mainly located in the south, where most of the food is produced. Pollution from industrial activities is due to airborne industrial pollutants that fall on to the land, and is mainly located in the west of the country, where most manufacturing activities take place. Pollution from urbanization is mainly due to the very large amount of solid, liquid and gaseous waste generated in a small area with insufficient treatment facilities, and exhaust fumes from vehicles, and is located around the largest cities, or roads. The result is that one fifth of China’s farmland is polluted, and an area the size of Taiwan is so polluted that farming should not be allowed there at all.
2010-07-01
... HAP Emission Limits for Catalytic Reforming Units 27 Table 27 to Subpart UUU of Part 63 Protection of... Pollutants for Petroleum Refineries: Catalytic Cracking Units, Catalytic Reforming Units, and Sulfur Recovery... Inorganic HAP Emission Limits for Catalytic Reforming Units As stated in § 63.1567(c)(1), you shall meet...
Zhang, J. K.; Ji, D. S.; Liu, Z. R.; Hu, B.; Wang, L. L.; Huang, X. J.; Wang, Y. S.
2015-07-01
In recent years, an increasing amount of attention has been paid to heavy haze pollution in Beijing, China. In addition to Beijing's population of approximately 20 million and its 5 million vehicles, nearby cities and provinces are host to hundreds of heavily polluting industries. In this study, a comparison between observations in January 2013 and January 2014 showed that non-refractory PM1 (NR-PM1) pollution was weaker in January 2014, which was primarily caused by variations in meteorological conditions. For the first time, positive matrix factorization (PMF) was applied to the merged high-resolution mass spectra of organic and inorganic aerosols from aerosol mass spectrometer measurements in Beijing, and the sources and evolution of NR-PM1 in January 2014 were investigated. The two factors, NO3-OA1 and NO3-OA2, were primarily composed of ammonium nitrate, and each showed a different degree of oxidation and diurnal variation. The organic fraction of SO4-OA showed the highest degree of oxidation of all PMF factors. The hydrocarbon-like organic aerosol (OA) and cooking OA factors contained negligible amounts of inorganic species. The coal combustion OA factor contained a high contribution from chloride in its mass spectrum. The NR-PM1 composition showed significant variations in January 2014, in which the contribution of nitrate clearly increased during heavy pollution events. The most effective way to control fine particle pollution in Beijing is through joint prevention and control measures at the regional level, rather than a focus on an individual city, especially for severe haze events.
75 FR 64321 - Interagency Coordinating Committee on Oil Pollution Research (ICCOPR); Public Meeting
2010-10-19
... public meeting in New Orleans, LA to hear comments on the priorities of oil pollution research, including... (NASA) --United States Coast Guard (USCG) --Federal Emergency Management Agency (FEMA), United States...
Pollution Sources in the nile and their environmental impacts
International Nuclear Information System (INIS)
Abd El- Bary, M.R.
1999-01-01
Over the past decades , the natural quality of water sources has been altered by the impact of various human activities and water uses. In Egypt, the Nile River which is considered as the main water source is still a recipient of most of the wastewater discharged by industrial effluents and several agriculture drains contains mixed wastes (sewage and industrial). These wastes includes a variety of pollutants which have considerable potential effect on both water ecosystem and human health. Monitoring of these pollutant is the first step for the improvement and protection of the Nile River .The Nile Research Institute designed a monitoring program includes collection and analysis of samples from 35 stations along the Nile River from Aswan to the Mediterranean Sea and from all points sources of pollution discharge their wastes into the Nile. The most important pollutant in these wastes are heavy metals, organic matters, inorganic compounds and micro organism causing disease
The pollution of the North Sea
International Nuclear Information System (INIS)
1981-01-01
The subject is covered in chapters entitled: the North Sea and its rivers; the uses of the North Sea (shipping; exploitation of oil and gas; fishing; recreation; land reclamation; industrial islands; waste dumping); the nature of the dumping problem (nuclear waste; organic chemicals; inorganic chemicals; oil; sewage; rubble and dredged spoils; ash); pollution legislation; Greenpeace activities in the North Sea (the nuclear campaigns (Windscale; Cap de la Hague; Atlantic waste dumping); the chemical campaigns); what is needed in the future; references; the Oslo Convention. (U.K.)
Water quality assessment of the Borska Reka river using the WPI (Water Pollution Index method
Directory of Open Access Journals (Sweden)
Milijašević Dragana
2011-01-01
Full Text Available The Borska Reka river (47 km long, 373 km2 of basin area is located in eastern Serbia and it is the biggest tributary of the river Veliki Timok. It is also one of the most polluted watercourses in Serbia. Using the data of the Republic Hydrometeorological Service of Serbia, the paper analyzes water pollution using the combined physical-chemical WPI index (water pollution index over two periods: 1993-1996 and 2006-2009. The analysis of parameters showed significantly increased values of heavy metals (especially iron and manganese which are indicators of inorganic pollution (primarily because of mining, but also increased values of organic pollution indicators (Biological Oxygen Demand-BOD5, ammonium, coliform germs, as the result of uncontrolled domestic wastewater discharge.
Energy Technology Data Exchange (ETDEWEB)
Biazini Filho, Francisco L.; Sordi, Gian-Maria, E-mail: gian@atomo.com.br, E-mail: Francisco.biazini@usp.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)
2013-07-01
The aim of this paper is to indicate the priorities in the themes and issues to integrate the social responsibilities (SR) in of the peaceful use of nuclear energy. The ABNT NBR ISO 26000 - Guidance on Social Responsibility{sub (1)}. Social responsibility should be an integral part of core organizational strategy, with assigned responsibilities and accountability at all appropriate levels of the organization. It should be reflected in decision making and considered in implementing activities. The process suggested is: 1 - determining relevance; 2 - determining significance and 3 - establishing priorities for addressing issues. The relevancies of each issue are established for us, in this paper, from the activities of the peaceful use of nuclear energy. For each relevant issue the priority are established and are: Core subject : The environment 6.5: Issue 1 : Prevention of pollution 6.5.3: Offers guidances to recognized authority sources on how to measure, assess, prevent or control the most common forms of pollution, including emissions to air, discharge waters, toxic products, waste management, biological agents, odors, visual pollution, among others. Core subject : The environment 6.5: Issue 2 : Sustainable resource use 6.5.4: Presents a series of actions aimed at the more smart use of resources, including energy efficiency, conservation, access and use of water, and extracting the most efficiency in the use of materials, renewable or not, reusing or recycling these resources whenever possible. Core subject : Community involvement and development 6.8: Issue 6 : Health 6.8.8: The organization must appreciate to eliminate the negative impacts of their activities on people's health, contributing as possible pair increase access to medicines and sanitation, as well as raise awareness about the disease as much as healthy lifestyles. In the next jobs we should consider the following to determine whether an action to address these 3 issues. (author)
International Nuclear Information System (INIS)
Biazini Filho, Francisco L.; Sordi, Gian-Maria
2013-01-01
The aim of this paper is to indicate the priorities in the themes and issues to integrate the social responsibilities (SR) in of the peaceful use of nuclear energy. The ABNT NBR ISO 26000 - Guidance on Social Responsibility (1) . Social responsibility should be an integral part of core organizational strategy, with assigned responsibilities and accountability at all appropriate levels of the organization. It should be reflected in decision making and considered in implementing activities. The process suggested is: 1 - determining relevance; 2 - determining significance and 3 - establishing priorities for addressing issues. The relevancies of each issue are established for us, in this paper, from the activities of the peaceful use of nuclear energy. For each relevant issue the priority are established and are: Core subject : The environment 6.5: Issue 1 : Prevention of pollution 6.5.3: Offers guidances to recognized authority sources on how to measure, assess, prevent or control the most common forms of pollution, including emissions to air, discharge waters, toxic products, waste management, biological agents, odors, visual pollution, among others. Core subject : The environment 6.5: Issue 2 : Sustainable resource use 6.5.4: Presents a series of actions aimed at the more smart use of resources, including energy efficiency, conservation, access and use of water, and extracting the most efficiency in the use of materials, renewable or not, reusing or recycling these resources whenever possible. Core subject : Community involvement and development 6.8: Issue 6 : Health 6.8.8: The organization must appreciate to eliminate the negative impacts of their activities on people's health, contributing as possible pair increase access to medicines and sanitation, as well as raise awareness about the disease as much as healthy lifestyles. In the next jobs we should consider the following to determine whether an action to address these 3 issues. (author)
Essue, Beverley M; Kapiriri, Lydia
2018-02-20
The double burden of infectious diseases coupled with noncommunicable diseases poses unique challenges for priority setting and for achieving equitable action to address the major causes of disease burden in health systems already impacted by limited resources. Noncommunicable disease control is an important global health and development priority. However, there are challenges for translating this global priority into local priorities and action. The aim of this study was to evaluate the influence of national, sub-national and global factors on priority setting for noncommunicable disease control in Uganda and examine the extent to which priority setting was successful. A mixed methods design that used the Kapiriri & Martin framework for evaluating priority setting in low income countries. The evaluation period was 2005-2015. Data collection included a document review (policy documents (n = 19); meeting minutes (n = 28)), media analysis (n = 114) and stakeholder interviews (n = 9). Data were analysed according to the Kapiriri & Martin (2010) framework. Priority setting for noncommunicable diseases was not entirely fair nor successful. While there were explicit processes that incorporated relevant criteria, evidence and wide stakeholder involvement, these criteria were not used systematically or consistently in the contemplation of noncommunicable diseases. There were insufficient resources for noncommunicable diseases, despite being a priority area. There were weaknesses in the priority setting institutions, and insufficient mechanisms to ensure accountability for decision-making. Priority setting was influenced by the priorities of major stakeholders (i.e. development assistance partners) which were not always aligned with national priorities. There were major delays in the implementation of noncommunicable disease-related priorities and in many cases, a failure to implement. This evaluation revealed the challenges that low income countries are
Laws of the electrochemical soils remediation from petroleum pollution
Energy Technology Data Exchange (ETDEWEB)
Korolev, V.A. [Moscow State Univ. (Russian Federation)
2001-07-01
The man-caused petroleum pollution of humus and soils in places of oil production, and also the pollution of geological environment by petroleum is carried out in growing scales. Very much frequently of ground and soils become soiled by petroleum at failures during transportation of petroleum. The humus and clay soils polluted by petroleum causes destruction ecosystems and landscapes. Therefore finding - out of the nature and mechanisms of interaction water-saturated dispersed soils with the liquid hydrocarbons becomes one of priority problems in the field of ecological geology. The development of methods of electrochemical clearing soils from the liquid hydrocarbons pollution is the important task too. Therefore, the study of dependences of a double electrical layer (DEL) parameters of the water-petroleum-saturated caolinite clay and electrochemical migration in it of petroleum was the purpose of the present work. (orig.)
Groundwater quality deterioration as a result of anthropogenic organic air pollution
International Nuclear Information System (INIS)
Renner, I.; Schleyer, R.; Muehlhausen, D.
1990-01-01
For monitoring the atmospherical depositions of organic materials in soil and in particular groundwater, we measured in rain water, soil seepage water and groundwater from four measuring stations in hessian forest areas the AOX sum parameter (organic halogen compounds which can be adsorbed) and numerous single compounds, above all chlorinated hydrocarbons. Anthropogenic organic pollutants are found in all precipitations. Their concentrations are clearly increased as compared to the open land. Of special importance are the atmospherical reaction products of the primary emissions, for example trichloroacetic acid. In analogy to inorganic pollutants, organic pollutant depositions affect above all poorly protected water-bearing strata with thin topsoil layers with a low capacity for adsorption and buffering. Harmful concentrations may be reached here in some cases. (orig.) [de
Schwarzinger, Michaël; Mohamed, Mostafa K; Gad, Rita R; Dewedar, Sahar; Fontanet, Arnaud; Carrat, Fabrice; Luchini, Stéphane
2010-12-20
Hepatitis C virus (HCV) recently emerged as a major public health hazard in Egypt. However, dramatic healthcare budget constraints limit access to the costly treatment. We assessed risk perception and priority setting for intervention among HCV, unsafe water, and outdoor air pollution in Cairo city. A survey was conducted in the homes of a representative sample of household heads in Cairo city. Risk perception was assessed using the "psychometric paradigm" where health hazards are evaluated according to several attributes and then summarized by principal component analysis. Priority setting was assessed by individual ranking of interventions reducing health hazards by 50% over five years. The Condorcet method was used to aggregate individual rankings of the three interventions (main study) or two of three interventions (validation study). Explanatory factors of priority setting were explored in multivariate generalized logistic models. HCV was perceived as having the most severe consequences in terms of illness and out-of-pocket costs, while outdoor air pollution was perceived as the most uncontrollable risk. In the main study (n = 2,603), improved water supply received higher priority than both improved outdoor air quality (60.1%, P report of HCV-related diseases in the household, and perception of HCV as the most severe risk were significantly associated to setting HCV treatment as the first priority. The Cairo community prefers to further improving water supply as compared to improved outdoor air quality and screening and treatment of chronic hepatitis C.
Roebeling, P C; Cunha, M C; Arroja, L; van Grieken, M E
2015-01-01
Marine ecosystems are affected by water pollution originating from coastal catchments. The delivery of water pollutants can be reduced through water pollution abatement as well as water pollution treatment. Hence, sustainable economic development of coastal regions requires balancing of the marginal costs from water pollution abatement and/or treatment and the associated marginal benefits from marine resource appreciation. Water pollution delivery reduction costs are, however, not equal across abatement and treatment options. In this paper, an optimal control approach is developed and applied to explore welfare maximizing rates of water pollution abatement and/or treatment for efficient diffuse source water pollution management in terrestrial-marine systems. For the case of diffuse source dissolved inorganic nitrogen water pollution in the Tully-Murray region, Queensland, Australia, (agricultural) water pollution abatement cost, (wetland) water pollution treatment cost and marine benefit functions are determined to explore welfare maximizing rates of water pollution abatement and/or treatment. Considering partial (wetland) treatment costs and positive water quality improvement benefits, results show that welfare gains can be obtained, primarily, through diffuse source water pollution abatement (improved agricultural management practices) and, to a minor extent, through diffuse source water pollution treatment (wetland restoration).
Priority setting: what constitutes success? A conceptual framework for successful priority setting.
Sibbald, Shannon L; Singer, Peter A; Upshur, Ross; Martin, Douglas K
2009-03-05
The sustainability of healthcare systems worldwide is threatened by a growing demand for services and expensive innovative technologies. Decision makers struggle in this environment to set priorities appropriately, particularly because they lack consensus about which values should guide their decisions. One way to approach this problem is to determine what all relevant stakeholders understand successful priority setting to mean. The goal of this research was to develop a conceptual framework for successful priority setting. Three separate empirical studies were completed using qualitative data collection methods (one-on-one interviews with healthcare decision makers from across Canada; focus groups with representation of patients, caregivers and policy makers; and Delphi study including scholars and decision makers from five countries). This paper synthesizes the findings from three studies into a framework of ten separate but interconnected elements germane to successful priority setting: stakeholder understanding, shifted priorities/reallocation of resources, decision making quality, stakeholder acceptance and satisfaction, positive externalities, stakeholder engagement, use of explicit process, information management, consideration of values and context, and revision or appeals mechanism. The ten elements specify both quantitative and qualitative dimensions of priority setting and relate to both process and outcome components. To our knowledge, this is the first framework that describes successful priority setting. The ten elements identified in this research provide guidance for decision makers and a common language to discuss priority setting success and work toward improving priority setting efforts.
Reis, S.; Vieno, M.; Beck, R.; Ots, R.; Moring, A.; Steinle, S.; Heal, M. R.; Doherty, R. M.
2014-12-01
Urban air pollution and its effects on human health remain to be a challenge in spite of substantial reductions in the emissions of air pollutants (e.g. sulphur dioxide, nitrogen oxides) over the past decades in Europe. While primary pollutants play a vital role in urban air pollution, recent model studies highlight and quantify the relevance of long-range transport of secondary pollution (e.g. secondary inorganic aerosols such as ammonium sulphates and nitrates, or ground level ozone) for the exceedance of local air quality limit values in urban areas across Europe. This contribution can be seen in recurring episodes, for instance in spring 2014, with very high levels of fine particulate matter (PM2.5) in Paris, London and other European cities, as well as in elevated background levels throughout the year. While we will focus on the contribution to exceedances of PM2.5 limit values here, this transboundary transport has wider implications for the deposition of reactive nitrogen far from the source as well. As local authorities are tasked with ensuring the attainment of air quality limit values, exceedances caused by long-range transport, with emissions originating from sources outside of their jurisdiction present substantial challenges. Furthermore, while policy measures have successfully addressed emissions from large point sources in the past, and made progress towards reducing pollution from road vehicles, emissions of ammonia from agricultural sources - a key component for the long-range transport of secondary inorganic aerosols - have remained relatively stable in Europe. Using the example of Europe and the UK, we demonstrate in our presentation how atmospheric chemistry transport modelling across different scales (from regional to local) can provide vital insight in the mechanisms of and relative contributions to the formation of secondary inorganic aerosols. In addition, we illustrate how this modelling capability can inform the design of efficient control
San, Vibol; Spoann, Vin; Schmidt, Johannes
2018-02-15
Approximately 56% out of the total 1302 Cambodian firms are operated in the Capital city of Cambodia. The necessary information on industrial pollution to set strategies, priorities and action plans on environmental protection issues is absent in Cambodia. In the absence of this data, effective environmental protection cannot be implemented. The objective of this study is to estimate industrial pollution load by employing the Industrial Pollution Projection System, a rapid environmental management tool for assessment of pollution load, to produce a scientific rational basis for preparing future policy direction to reduce industrial pollution in Phnom Penh city. Factory data between 1994 and 2014 obtained from the Ministry of Industry and Handicraft of Cambodia were used in our study. Due to the high number of employees, the total environmental load generated in Phnom Penh city was estimated to be 476,981Mg in 2014. Phnom Penh city generated 189,109Mg of VOC, 165,411Mg of toxic chemicals to air, 38,523Mg of toxic chemicals to land, and 28,968Mg of SO 2 in 2014. The results of the estimation show that the Textiles and Apparel sector was the highest generators of toxic chemicals into land and air, and toxic metals into land, air and water, while the Basic Metal sector was the greatest contributor of toxic chemicals to water. The Textiles and Apparel sector alone emitted 436,016Mg of total pollution load. The results indicate that the Dangkao and Meanchey districts were the greatest emitters of all pollutants in Phnom Penh. The results suggest that reduction in industrial pollution could be achieved by focusing on the most polluting sectors and areas. Adopting waste minimization strategies, which include cleaner production processes, will not only reduce the cost of controlling pollution, it will also make manufacturing more efficient thereby increasing profits while reducing pollution load in the long run. Copyright © 2017 Elsevier B.V. All rights reserved.
Setting conservation priorities.
Wilson, Kerrie A; Carwardine, Josie; Possingham, Hugh P
2009-04-01
A generic framework for setting conservation priorities based on the principles of classic decision theory is provided. This framework encapsulates the key elements of any problem, including the objective, the constraints, and knowledge of the system. Within the context of this framework the broad array of approaches for setting conservation priorities are reviewed. While some approaches prioritize assets or locations for conservation investment, it is concluded here that prioritization is incomplete without consideration of the conservation actions required to conserve the assets at particular locations. The challenges associated with prioritizing investments through time in the face of threats (and also spatially and temporally heterogeneous costs) can be aided by proper problem definition. Using the authors' general framework for setting conservation priorities, multiple criteria can be rationally integrated and where, how, and when to invest conservation resources can be scheduled. Trade-offs are unavoidable in priority setting when there are multiple considerations, and budgets are almost always finite. The authors discuss how trade-offs, risks, uncertainty, feedbacks, and learning can be explicitly evaluated within their generic framework for setting conservation priorities. Finally, they suggest ways that current priority-setting approaches may be improved.
Strategies to water pollution control in western China
Institute of Scientific and Technical Information of China (English)
JIANGWenchao; CHENGJijian; LONGTengrui; HEQiang
2003-01-01
Problems of and main limiting factors to Chinese western eco-environment are analyzea firstly and principles of integrating water pollution control with water resources planning and management, with ecological construction and with economic development planning and setting control priorities according to local conditions are proposed. Following strategies for water pollution control are suggested: 1) a master plan for western area need to be established as soon as possible; 2) total emission control should be regarded as the basic policy and measures such as clean production, charging and subsidy need to be implemented; 3) point sources pollution control should be considered the main task in short term and centralized wasteweter treatment plants by using sustainable processes should be constructed primarily for large and medium-size cities with heavier pollution; 4) sound institutional and regulation systems need to be established to create an enabling environment; 5) multiple investment system should be established; and 6) studies of pragmatic theories and methodologies for water pollution control and cost-effective technologies appropriate to western area, and training of local technicians need to be enhanced as well.
International Nuclear Information System (INIS)
Pavlicek, Z.; Barta, C.; Jursova, L.
1986-01-01
An inorganic liquid scintillator is designed which contains 1 to 30 wt.% of an inorganic molecular compound as the basic active component; the compound contains a cation with an atomic number higher than 47 and a halogen anion. The basic inorganic component is dissolved in water or in an organic solvent in form of non-dissociated molecules or self-complexes in which the bond is preserved between the cation and anion components. The light yield from these scintillators ranges between 70 and 150% of the light yield of a standard organic scintillator based on toluene. They are advantageous in that that they allow to increase the water content in the sample to up to 100%. (M.D.)
Land use and water pollution in Puerto Rico
International Nuclear Information System (INIS)
Arbona, S.I.
1991-01-01
In Puerto Rico, previous water-quality analyses have indicated that most surface-water bodies, as well as ground water, are polluted with both organic and inorganic substances. Contributions to water-quality deterioration come from point and nonpoint sources. These pose a threat on a densely populated island. Urban and industrial development occurred rapidly with a lag in the required infrastructure for expansion. Water pollution has been a by-product of this process and is regarded as the most serious environmental problem on the island. This study examines water-quality parameters in three hydrological basins. It attempts to determine how extensive a problem it is and how the concentration of pollutants compare in different land-use situations. A total of 33 sampling sites distributed among the three watersheds was chosen. Fifteen water-quality parameters were examined. All of the water bodies in spatial association with the land use considered presented detectable concentrations of the selected water-quality parameters
Directory of Open Access Journals (Sweden)
Irwan Ramadhan Ritonga
2013-06-01
Full Text Available Normal 0 false false false IN X-NONE X-NONE MicrosoftInternetExplorer4 Normal 0 false false false IN X-NONE X-NONE MicrosoftInternetExplorer4 Inorganic carbon is closely related to the calcification process (CaCO3, which is the main constituent of coral reefs or microorganisms that exist in the oceans such as foraminifera and cocolitoporit. Inorganic carbon is also closely linked to the chemical processes that occur when carbon dioxide gas (CO2 dissolved in water. The research of inorganic carbon in the waters of Beras Basah was carried out in January, February and March 2012. The purpose of this study was to understand the distribution and concentration of total inorganic carbon (CT in coral reef and seagrass ecosystems as well as the correlation of Beras Basah. The results showed that the concentration of total inorganic carbon (CT in January average 1166.503 μmol/kgSW, February average 1115.599 μmol/kgSW, and then in March the average 987.443 μmol/kgSW. Distribution patterns of total inorganic carbon (CT is vectoral, where in January, the concentration of total inorganic carbon (CT was highest in the Southeast region, was in February in the South and Southeast, while in March shifted to North region of Beras Basah Island. The concentration difference is thought to be influenced by pH and the seasons, tides, biochemical processes, and biological activity. Normal 0 false false false IN X-NONE X-NONE MicrosoftInternetExplorer4 Doi: 10.12777/ijse.5.1.1-5 [How to cite this article: Ritonga, I.R., Supriharyono, and Henderarto, B. (2013. Distribution of Coral Reef and Seagrass Ecosystems’s Inorganic Carbon in the Waters of Beras Basah Bontang, East Kalimantan. International Journal of Science and Engineering, 5(1,1-6. Doi: 10.12777/ijse.5.1.1-5]
Inorganic and organic contaminants in Alaskan shorebird eggs.
Saalfeld, David T; Matz, Angela C; McCaffery, Brian J; Johnson, Oscar W; Bruner, Phil; Lanctot, Richard B
2016-05-01
Many shorebird populations throughout North America are thought to be declining, with potential causes attributed to habitat loss and fragmentation, reduced prey availability, increased predation, human disturbance, and increased exposure to environmental pollutants. Shorebirds may be particularly vulnerable to contaminant exposure throughout their life cycle, as they forage primarily on invertebrates in wetlands, where many contaminants accumulate disproportionately in the sediments. Therefore, it is important to document and monitor shorebird populations thought to be at risk and assess the role that environmental contaminants may have on population declines. To investigate potential threats and provide baseline data on shorebird contaminant levels in Alaskan shorebirds, contaminant concentrations were evaluated in shorebird eggs from 16 species residing in seven geographic distinct regions of Alaska. Similar to previous studies, low levels of most inorganic and organic contaminants were found, although concentrations of several inorganic and organic contaminants were higher than those of previous studies. For example, elevated strontium levels were observed in several species, especially black oystercatcher (Haematopus bachmani) sampled in Prince William Sound, Alaska. Additionally, contaminant concentrations varied among species, with significantly higher concentrations of inorganic contaminants found in eggs of pectoral sandpiper (Calidris melanotos), semipalmated sandpiper (Calidris pusilla), black oystercatcher, and bar-tailed godwit (Limosa lapponica). Similarly, significantly higher concentrations of some organic contaminants were found in the eggs of American golden plover (Pluvialis dominica), black-bellied plover (Pluvialis squatarola), pacific golden plover (Pluvialis fulva), bar-tailed godwit, and semipalmated sandpiper. Despite these elevated levels, current concentrations of contaminants in shorebird eggs suggest that breeding environments are
Concentrations and speciation of arsenic in groundwater polluted by warfare agents
International Nuclear Information System (INIS)
Daus, Birgit; Hempel, Michael; Wennrich, Rainer; Weiss, Holger
2010-01-01
Groundwater polluted with phenylarsenicals from former warfare agent deposits and their metabolites was investigated with respect to the behavior of relevant arsenic species. Depth profiles at the estimated source and at about 1 km downgradient from the source zone were sampled. The source zone is characterized by high total arsenic concentrations up to 16 mg L -1 and is dominated by organic arsenic compounds. The concentrations in the downgradient region are much lower (up to 400 μg L -1 ) and show a high proportion of inorganic arsenic species. Iron precipitation seems to be an effective mechanism to prevent dispersion of inorganic arsenic as well as phenylarsonic acid. Reductive conditions were observed in the deeper zone with predominant occurrence of trivalent arsenic species. The inorganic species are in redox equilibrium, whereas the phenylarsenic compounds have variable proportions. Methylphenylarsinic acid was identified in groundwater in traces which indicates microbial degradation activity. - The environmental fate and behavior of phenylarsenicals in groundwater are influenced by the geochemical environment.
Concentrations and speciation of arsenic in groundwater polluted by warfare agents
Energy Technology Data Exchange (ETDEWEB)
Daus, Birgit, E-mail: birgit.daus@ufz.d [UFZ - Helmholtz Centre for Environmental Research, Department of Groundwater Remediation, Permoserstrasse 15, 04318 Leipzig (Germany); Hempel, Michael [UFZ - Helmholtz Centre for Environmental Research, Department of Groundwater Remediation, Permoserstrasse 15, 04318 Leipzig (Germany); Wennrich, Rainer [Department of Analytical Chemistry, Permoserstrasse 15, 04318 Leipzig (Germany); Weiss, Holger [UFZ - Helmholtz Centre for Environmental Research, Department of Groundwater Remediation, Permoserstrasse 15, 04318 Leipzig (Germany)
2010-11-15
Groundwater polluted with phenylarsenicals from former warfare agent deposits and their metabolites was investigated with respect to the behavior of relevant arsenic species. Depth profiles at the estimated source and at about 1 km downgradient from the source zone were sampled. The source zone is characterized by high total arsenic concentrations up to 16 mg L{sup -1} and is dominated by organic arsenic compounds. The concentrations in the downgradient region are much lower (up to 400 {mu}g L{sup -1}) and show a high proportion of inorganic arsenic species. Iron precipitation seems to be an effective mechanism to prevent dispersion of inorganic arsenic as well as phenylarsonic acid. Reductive conditions were observed in the deeper zone with predominant occurrence of trivalent arsenic species. The inorganic species are in redox equilibrium, whereas the phenylarsenic compounds have variable proportions. Methylphenylarsinic acid was identified in groundwater in traces which indicates microbial degradation activity. - The environmental fate and behavior of phenylarsenicals in groundwater are influenced by the geochemical environment.
Y. Serengil; A. Augustaitis; Andrzej Bytnerowicz; Nancy Grulke; A.R. Kozovitz; R. Matyssek; G. Müller-Starck; M. Schaub; G. Wieser; A.A. Coskun; E. Paoletti
2011-01-01
Climate change and air pollution are two of the anthropogenic stressors that require international collaboration. Influence mechanisms and combating strategies towards them have similarities to some extent. Impacts of air pollution and climate change have long been studied under IUFRO Research Group 7.01 and state of the art findings are presented at biannual meetings...
Air pollution control policy in Switzerland
Energy Technology Data Exchange (ETDEWEB)
Leutert, G. [Forests and Landscape, Berne (Switzerland). Federal Office of Environment
1995-12-31
The legal basis of the Swiss air pollution control policy is set by the Federal Law on the Protection of the Environment, which came into force in 1985. It aims to protect human beings, animals and plants, their biological communities and habitats against harmful effects or nuisances and to maintain the fertility of the soil. The law is source-oriented (by emission standards) as well as effect-oriented (by ambient air quality standards). To link both elements a two-stage approach is applied. In the first stage preventive measures are taken at the emitting sources, irrespective of existing air pollution levels. Emissions have to be limited by early preventive measures as much as technical and operational conditions allow and as far as economically acceptable (prevention principle). By this, air pollution shall be kept as low as possible as a matter of principle, without the environment having to be in danger first. In a second stage the measures are strengthened or backed up by additional measures if ambient air quality standards laid down in the Ordinance on Air Pollution Control are exceeded. At this second stage, protection of man and his environment has priority over economic considerations. (author)
Air pollution control policy in Switzerland
Energy Technology Data Exchange (ETDEWEB)
Leutert, G [Forests and Landscape, Berne (Switzerland). Federal Office of Environment
1996-12-31
The legal basis of the Swiss air pollution control policy is set by the Federal Law on the Protection of the Environment, which came into force in 1985. It aims to protect human beings, animals and plants, their biological communities and habitats against harmful effects or nuisances and to maintain the fertility of the soil. The law is source-oriented (by emission standards) as well as effect-oriented (by ambient air quality standards). To link both elements a two-stage approach is applied. In the first stage preventive measures are taken at the emitting sources, irrespective of existing air pollution levels. Emissions have to be limited by early preventive measures as much as technical and operational conditions allow and as far as economically acceptable (prevention principle). By this, air pollution shall be kept as low as possible as a matter of principle, without the environment having to be in danger first. In a second stage the measures are strengthened or backed up by additional measures if ambient air quality standards laid down in the Ordinance on Air Pollution Control are exceeded. At this second stage, protection of man and his environment has priority over economic considerations. (author)
Quantification of Heavy Metals and Other Inorganic Contaminants on the Productivity of Microalgae.
Napan, Katerine; Hess, Derek; McNeil, Brian; Quinn, Jason C
2015-07-10
Increasing demand for renewable fuels has researchers investigating the feasibility of alternative feedstocks, such as microalgae. Inherent advantages include high potential yield, use of non-arable land and integration with waste streams. The nutrient requirements of a large-scale microalgae production system will require the coupling of cultivation systems with industrial waste resources, such as carbon dioxide from flue gas and nutrients from wastewater. Inorganic contaminants present in these wastes can potentially lead to bioaccumulation in microalgal biomass negatively impact productivity and limiting end use. This study focuses on the experimental evaluation of the impact and the fate of 14 inorganic contaminants (As, Cd, Co, Cr, Cu, Hg, Mn, Ni, Pb, Sb, Se, Sn, V and Zn) on Nannochloropsis salina growth. Microalgae were cultivated in photobioreactors illuminated at 984 µmol m(-2) sec(-1) and maintained at pH 7 in a growth media polluted with inorganic contaminants at levels expected based on the composition found in commercial coal flue gas systems. Contaminants present in the biomass and the medium at the end of a 7 day growth period were analytically quantified through cold vapor atomic absorption spectrometry for Hg and through inductively coupled plasma mass spectrometry for As, Cd, Co, Cr, Cu, Mn, Ni, Pb, Sb, Se, Sn, V and Zn. Results show N. salina is a sensitive strain to the multi-metal environment with a statistical decrease in biomass yieldwith the introduction of these contaminants. The techniques presented here are adequate for quantifying algal growth and determining the fate of inorganic contaminants.
Saxena, Gaurav; Chandra, Ram; Bharagava, Ram Naresh
Leather industries are key contributors in the economy of many developing countries, but unfortunately they are facing serious challenges from the public and governments due to the associated environmental pollution. There is a public outcry against the industry due to the discharge of potentially toxic wastewater having alkaline pH, dark brown colour, unpleasant odour, high biological and chemical oxygen demand, total dissolved solids and a mixture of organic and inorganic pollutants. Various environment protection agencies have prioritized several chemicals as hazardous and restricted their use in leather processing however; many of these chemicals are used and discharged in wastewater. Therefore, it is imperative to adequately treat/detoxify the tannery wastewater for environmental safety. This paper provides a detail review on the environmental pollution and toxicity profile of tannery wastewater and chemicals. Furthermore, the status and advances in the existing treatment approaches used for the treatment and/or detoxification of tannery wastewater at both laboratory and pilot/industrial scale have been reviewed. In addition, the emerging treatment approaches alone or in combination with biological treatment approaches have also been considered. Moreover, the limitations of existing and emerging treatment approaches have been summarized and potential areas for further investigations have been discussed. In addition, the clean technologies for waste minimization, control and management are also discussed. Finally, the international legislation scenario on discharge limits for tannery wastewater and chemicals has also been discussed country wise with discharge standards for pollution prevention due to tannery wastewater.
Linking toxicity profiles to pollutants in sludge and sediments
Czech Academy of Sciences Publication Activity Database
Stiborová, H.; Kolář, Michal; Vrkoslavová, J.; Pulkrabová, J.; Hajslova, J.; Demnerová, K.; Uhlík, O.
2017-01-01
Roč. 321, zima (2017), s. 672-680 ISSN 0304-3894 R&D Projects: GA ČR(CZ) GA15-02328S Institutional support: RVO:68378050 Keywords : polycyclic aromatic-hydrocarbons * Toxicity * Contamination * Sludge * Sediments * Priority pollutants * Constrained correspondence analysis (CCS) Subject RIV: EB - Genetics ; Molecular Biology OBOR OECD: Other biological topics Impact factor: 6.065, year: 2016
Pollution control and environmental monitoring efforts at DOE's Coal-Fired Flow Facility
International Nuclear Information System (INIS)
Attig, R.C.; Crawford, L.W.; Lynch, T.P.; Sheth, A.C.
1991-01-01
Proof-of-Concept (POC) scale demonstration of such technology is currently being carried out at the US Department of Energy's (DOE's) Coal-Fired Flow Facility (CFFF), located at The University of Tennessee Space Institute (UTSI) in Tullahoma, Tennessee and at the Component Development and Integration Facility in Butte, Montana. The CFFF is dedicated to the evaluation of downstream (steam cycle) components and technology that may be considered for a full-scale MHD system. The objectives of the CFFF testing include the demonstration of various pollution control devices and techniques at a scale sufficient for future scale-up. The CFFF offers a unique test environment in which emissions control techniques can be developed and evaluated through emissions and environmental monitoring. Results thus far have demonstrated the ability of sulfur oxide (SO x ), nitrogen oxide (NO x ) and particulate emissions well below the New Source Performance Standards (NSPS). Regeneration of the potassium sulfate to produce sulfur-free compounds also has been demonstrated. The experimental program at the CFFF is now aimed at determining the optimum conditions for future commercial scale designs. Because of increased interests in Air Toxics, measurements of nitrous oxide (N 2 O), a potential greenhouse gas, priority pollutants (inorganic as well as organics), and chlorine-containing species (Cl 2 and HCl) are also included in our ongoing efforts. Environmental monitoring activities are being pursued to develop an environmental impact assessment data base. These include the use of three ambient air sites to determine the impacts of gaseous and particulate emissions, five lake water sites to determine impacts due to process water discharges and seven sites to collect terrestrial data on possible soil contamination and tree growth. In this paper, we will summarize the status of our ongoing environmental program. 16 refs., 15 figs., 3 tabs
Method for the prioritization of areas experiencing microbial pollution of surface water
CSIR Research Space (South Africa)
Venter, SN
1998-01-01
Full Text Available The increased threat of faecal pollution in recent years and the high priority of protecting human health by the government led to the initiation of a national microbial monitoring programme for surface water in South Africa. According to the design...
Directory of Open Access Journals (Sweden)
Dewedar Sahar
2010-12-01
Full Text Available Abstract Background Hepatitis C virus (HCV recently emerged as a major public health hazard in Egypt. However, dramatic healthcare budget constraints limit access to the costly treatment. We assessed risk perception and priority setting for intervention among HCV, unsafe water, and outdoor air pollution in Cairo city. Methods A survey was conducted in the homes of a representative sample of household heads in Cairo city. Risk perception was assessed using the "psychometric paradigm" where health hazards are evaluated according to several attributes and then summarized by principal component analysis. Priority setting was assessed by individual ranking of interventions reducing health hazards by 50% over five years. The Condorcet method was used to aggregate individual rankings of the three interventions (main study or two of three interventions (validation study. Explanatory factors of priority setting were explored in multivariate generalized logistic models. Results HCV was perceived as having the most severe consequences in terms of illness and out-of-pocket costs, while outdoor air pollution was perceived as the most uncontrollable risk. In the main study (n = 2,603, improved water supply received higher priority than both improved outdoor air quality (60.1%, P P Conclusions The Cairo community prefers to further improving water supply as compared to improved outdoor air quality and screening and treatment of chronic hepatitis C.
Balancing energy, development and climate priorities in India. Current trends and future projections
International Nuclear Information System (INIS)
Shukla, P.R.; Garg, A.; Dhar, S.; Halsnaes, K.
2007-09-01
This report gives a short introduction to the project: Projecting future energy demand: Balancing development, energy and climate priorities in large developing countries. Furthermore, the report analyses Indian energy, development and climate change, followed by an assessment of cross-country results that gives a range of key indicators of the relationship between economic growth, energy, and local and global pollutants. The focus is on the energy sector policies that mainstream climate interests within development choices. (BA)
Potential of cold-adapted microorganisms for bioremediation of oil-polluted Alpine soils
International Nuclear Information System (INIS)
Margesin, R.
2000-01-01
The environmental contamination by organic pollutants is a widespread problem in all climates. The most widely distributed pollution can be attributed to oil contamination. Bioremediation methods can provide efficient, inexpensive and environmentally safe cleanup tools. The role of cold-adapted microorganisms for the bioremediation of experimentally and chronically oil-contaminated Alpine soils was evaluated in the studies described. The results demonstrated that there is a considerable potential for oil bioremediation in Alpine soils. Oil biodegradation can be significantly enhanced by biostimulation (inorganic nutrient supply), but a complete oil elimination is not possible by employing biological decontamination alone. (Author)
Gevaert, Veerle; Verdonck, Frederik; Benedetti, Lorenzo; De Keyser, Webbey; De Baets, Bernard
2009-06-01
The European Water Framework Directive (WFD) aims at achieving a good ecological and chemical status of surface waters in river basins by 2015. The chemical status is considered good if the Environmental Quality Standards (EQSs) are met for all substances listed on the priority list and eight additional specific emerging substances. To check compliance with these standards, the WFD requires the establishment of monitoring programmes. The minimum measuring frequency for priority substances is currently set at once per month. This can result in non-representative sampling and increased probability of misinterpretation of the surface water quality status. To assist in the classification of the water body, the combined use of monitoring data and pollutant fate models is recommended. More specifically, dynamic models are suggested, as possible exceedance of the quality standards can be predicted by such models. In the presented work, four realistic scenarios are designed and discussed to illustrate the usefulness of dynamic pollutant fate models for implementing the WFD. They comprise a combination of two priority substances and two rivers, representative for Western Europe.
Zhao, Bin; Wu, Wenjing; Wang, Shuxiao; Xing, Jia; Chang, Xing; Liou, Kuo-Nan; Jiang, Jonathan H.; Gu, Yu; Jang, Carey; Fu, Joshua S.; Zhu, Yun; Wang, Jiandong; Lin, Yan; Hao, Jiming
2017-10-01
The Beijing-Tianjin-Hebei (BTH) region has been suffering from the most severe fine-particle (PM2. 5) pollution in China, which causes serious health damage and economic loss. Quantifying the source contributions to PM2. 5 concentrations has been a challenging task because of the complicated nonlinear relationships between PM2. 5 concentrations and emissions of multiple pollutants from multiple spatial regions and economic sectors. In this study, we use the extended response surface modeling (ERSM) technique to investigate the nonlinear response of PM2. 5 concentrations to emissions of multiple pollutants from different regions and sectors over the BTH region, based on over 1000 simulations by a chemical transport model (CTM). The ERSM-predicted PM2. 5 concentrations agree well with independent CTM simulations, with correlation coefficients larger than 0.99 and mean normalized errors less than 1 %. Using the ERSM technique, we find that, among all air pollutants, primary inorganic PM2. 5 makes the largest contribution (24-36 %) to PM2. 5 concentrations. The contribution of primary inorganic PM2. 5 emissions is especially high in heavily polluted winter and is dominated by the industry as well as residential and commercial sectors, which should be prioritized in PM2. 5 control strategies. The total contributions of all precursors (nitrogen oxides, NOx; sulfur dioxides, SO2; ammonia, NH3; non-methane volatile organic compounds, NMVOCs; intermediate-volatility organic compounds, IVOCs; primary organic aerosol, POA) to PM2. 5 concentrations range between 31 and 48 %. Among these precursors, PM2. 5 concentrations are primarily sensitive to the emissions of NH3, NMVOC + IVOC, and POA. The sensitivities increase substantially for NH3 and NOx and decrease slightly for POA and NMVOC + IVOC with the increase in the emission reduction ratio, which illustrates the nonlinear relationships between precursor emissions and PM2. 5 concentrations. The contributions of primary
Urban air pollution in Latin America and the Caribbean
International Nuclear Information System (INIS)
Romieu, I.; Weitzenfeld, H.; Finkelman, J.
1991-01-01
Urban air pollution has become an increasing problem in Latin America and the Caribbean. One reason is the rapid expansion in the size of the urban population. This phenomenon is associated with an increase in the number of vehicles and in energy utilization which, in addition to industrial processes often concentrated in the cities, are the primary sources of air pollution i n Latin American cities. The air quality standards established in such countries are frequently exceeded although control programs have been implemented. The urban areas more affected by anthropogenic pollutant emissions are Sao Paulo, Brazil; Santiago, Chile; and Mexico City. In Latin America, the population of cities with high priority air pollution problems include approximately 81 million people or 26.5 percent of the total urban population of Latin America, corresponding to 30 million children (<15 years), 47 million adults (15-59 years) and 4 million elderly people (≥60 years) who are exposed to air pollutant levels that exceed World Health Organization (WHO) guidelines for adequate health protection
Pollution Impact and Alternative Treatment for Produced Water
Hedar, Yusran; Budiyono
2018-02-01
Oil and gas exploration and production are two of the activities that potentially cause pollution and environmental damage. The largest waste generated from this activity is produced water. Produced water contains hazardous pollutants of both organic and inorganic materials, so that the produced water of oil and gas production cannot be discharged directly to the environment. Uncontrolled discharge can lead to the environmental damage, killing the life of water and plants. The produced water needs to be handled and fulfill the quality standards before being discharged to the environment. Several studies to reduce the contaminants in the produced water were conducted by researchers. Among them were gravity based separation - flotation, separation technique based on filtration, and biological process treatment. Therefore, some of these methods can be used as an alternative waste handling of produced water.
International Nuclear Information System (INIS)
Koopmann, C.; Faller, J.; Bernem, K.H. van; Prange, A.; Mueller, A.
1994-01-01
From June 1989 to June 1992 a mapping of inorganic and organic pollutants in the sediments from the entire German Wadden Sea has been carried out. Following the guidelines of the national (Bund/Laender-Messprogramm) and international monitoring programmes for the North Sea (Joint Monitoring Programme) distribution patterns of pollutants according to their type and concentration have been determined in the course of this investigation and the main pollution areas have been established. Based on the results of the mapping of pollutants, as well as on the first findings of the biological mapping, a concept for the monitoring of pollutants in eulittoral sediments of the German Wadden Sea has been developed. (orig.) [de
Sampling of Atmospheric Precipitation and Deposits for Analysis of Atmospheric Pollution
Skarżyńska, K.; Polkowska, Ż; Namieśnik, J.
2006-01-01
This paper reviews techniques and equipment for collecting precipitation samples from the atmosphere (fog and cloud water) and from atmospheric deposits (dew, hoarfrost, and rime) that are suitable for the evaluation of atmospheric pollution. It discusses the storage and preparation of samples for analysis and also presents bibliographic information on the concentration ranges of inorganic and organic compounds in the precipitation and atmospheric deposit samples.
Cleaveland, Rance; Luettgen, Gerald; Natarajan, V.
1999-01-01
This paper surveys the semantic ramifications of extending traditional process algebras with notions of priority that allow for some transitions to be given precedence over others. These enriched formalisms allow one to model system features such as interrupts, prioritized choice, or real-time behavior. Approaches to priority in process algebras can be classified according to whether the induced notion of preemption on transitions is global or local and whether priorities are static or dynamic. Early work in the area concentrated on global pre-emption and static priorities and led to formalisms for modeling interrupts and aspects of real-time, such as maximal progress, in centralized computing environments. More recent research has investigated localized notions of pre-emption in which the distribution of systems is taken into account, as well as dynamic priority approaches, i.e., those where priority values may change as systems evolve. The latter allows one to model behavioral phenomena such as scheduling algorithms and also enables the efficient encoding of real-time semantics. Technically, this paper studies the different models of priorities by presenting extensions of Milner's Calculus of Communicating Systems (CCS) with static and dynamic priority as well as with notions of global and local pre- emption. In each case the operational semantics of CCS is modified appropriately, behavioral theories based on strong and weak bisimulation are given, and related approaches for different process-algebraic settings are discussed.
Corrosion of AISI 304 stainless steel in polluted seawater
International Nuclear Information System (INIS)
Brankevich, G.; Guiamet, P.; Videla, H.A.
1987-01-01
The sequence of microbiofouling settlement on AISI 304 stain steel samples exposed to polluted harbor sea water of a power cooling water intake is studied. The firts sates of bacterial colonization are followed by means of scanning electron microscopy during two weeks of exposure. The relation between microbiofouling and corrosion is also followed by scanning electron microscopy and evaluated through electrochemical polarization experiments. The results obtained show that microbial colonization and extracellular polimeric substances forming the biofilms have a marked influence on the electrochemical behaviour of stainless steel in sea water. Laboratory experiments using inorganic chloride solutions or artificial sea water show a considerably lesser attack of the metal than those performed 'in situ' with natural sea water. Passivity breadown is highly facilitated when complex biological and inorganic deposits (fouling) have settled on the metal surface. (Author) [pt
Center for BioBased Binders and Pollution Reduction Technology
Energy Technology Data Exchange (ETDEWEB)
Thiel, Jerry [Univ. of Northern Iowa, Cedar Falls, IA (United States)
2013-07-01
Funding will support the continuation of the Center for Advanced Bio-based Binders and Pollution Reduction Technology Center (CABB) in the development of bio-based polymers and emission reduction technologies for the metal casting industry. Since the formation of the center several new polymers based on agricultural materials have been developed. These new materials have show decreases in hazardous air pollutants, phenol and formaldehyde as much as 50 to 80% respectively. The polymers termed bio-polymers show a great potential to utilize current renewable agricultural resources to replace petroleum based products and reduce our dependence on importing of foreign oil. The agricultural technology has shown drastic reductions in the emission of hazardous air pollutants and volatile organic compounds and requires further development to maintain competitive costs and productivity. The project will also research new and improved inorganic binders that promise to eliminate hazardous emissions from foundry casting operations and allow for the beneficial reuse of the materials and avoiding the burdening of overcrowded landfills.
Directory of Open Access Journals (Sweden)
Ina Bulskaya
2014-03-01
Full Text Available The aim of this paper was to study the inorganic constituents of snow and snowmelt surface runoff in a case study of the city of Brest and to indicate components that could pose a threat to the environment. Samples of snow and snowmelt runoff were analysed for the following parameters: total suspended solids, pH, the contents of nitrate, phosphate and ammonium ions, and of heavy metals. The concentrations of most of these pollutants were higher in the snowmelt runoff than in snow. The concentrations of pollutants in the snowmelt surface runoff exceeded the levels established by national regulations (maximum permissible concentrations.
Room-temperature ductile inorganic semiconductor
Shi, Xun; Chen, Hongyi; Hao, Feng; Liu, Ruiheng; Wang, Tuo; Qiu, Pengfei; Burkhardt, Ulrich; Grin, Yuri; Chen, Lidong
2018-05-01
Ductility is common in metals and metal-based alloys, but is rarely observed in inorganic semiconductors and ceramic insulators. In particular, room-temperature ductile inorganic semiconductors were not known until now. Here, we report an inorganic α-Ag2S semiconductor that exhibits extraordinary metal-like ductility with high plastic deformation strains at room temperature. Analysis of the chemical bonding reveals systems of planes with relatively weak atomic interactions in the crystal structure. In combination with irregularly distributed silver-silver and sulfur-silver bonds due to the silver diffusion, they suppress the cleavage of the material, and thus result in unprecedented ductility. This work opens up the possibility of searching for ductile inorganic semiconductors/ceramics for flexible electronic devices.
Inorganic chemistry of earliest sediments
International Nuclear Information System (INIS)
Ochiai, E.I.
1983-01-01
A number of inorganic elements are now known to be essential to organisms. Chemical evolutionary processes involving carbon, hydrogen, nitrogen and oxygen have been studied intensively and extensively, but the other essential elements have been rather neglected in the studies of chemical and biological evolution. This article attempts to assess the significance of inorganic chemistry in chemical and biological evolutionary processes on the earth. Emphasis is placed on the catalytic effects of inorganic elements and compounds, and also on possible studies on the earliest sediments, especially banded iron formation and stratabound copper from the inorganic point of view in the hope of shedding some light on the evolution of the environment and the biological effects on it. (orig./WL)
Nanostructures in environmental pollution detection, monitoring, and remediation
Directory of Open Access Journals (Sweden)
A. Vaseashta et al
2007-01-01
Full Text Available We present preliminary results of our joint investigations to monitor and mitigate environmental pollution, a leading contributor to chronic and deadly health disorders and diseases affecting millions of people each year. Using nanotechnology-based gas sensors; pollution is monitored at several ground stations. The sensor unit is portable, provides instantaneous ground pollution concentrations accurately, and can be readily deployed to disseminate real-time pollution data to a web server providing a topological overview of monitored locations. We are also employing remote sensing technologies with high-spatial and spectral resolution to model urban pollution using satellite images and image processing. One of the objectives of this investigation is to develop a unique capability to acquire, display and assimilate these valuable sources of data to accurately assess urban pollution by real-time monitoring using commercial sensors fabricated using nanofabrication technologies and satellite imagery. This integrated tool will be beneficial towards prediction processes to support public awareness and establish policy priorities for air quality in polluted areas. The complex nature of environmental pollution data mining requires computing technologies that integrate multiple sources and repositories of data over multiple networking systems and platforms that must be accurate, secure, and reliable. An evaluation of information security risks and strategies within an environmental information system is presented. In addition to air pollution, we explore the efficacy of nanostructured materials in the detection and remediation of water pollution. We present our results of sorption on advanced nanomaterials-based sorbents that have been found effective in the removal of cadmium and arsenic from water streams.
The Role of Plant–Microbe Interactions and Their Exploitation for Phytoremediation of Air Pollutants
Weyens, Nele; Thijs, Sofie; Popek, Robert; Witters, Nele; Przybysz, Arkadiusz; Espenshade, Jordan; Gawronska, Helena; Vangronsveld, Jaco; Gawronski, Stanislaw W.
2015-01-01
Since air pollution has been linked to a plethora of human health problems, strategies to improve air quality are indispensable. Despite the complexity in composition of air pollution, phytoremediation was shown to be effective in cleaning air. Plants are known to scavenge significant amounts of air pollutants on their aboveground plant parts. Leaf fall and runoff lead to transfer of (part of) the adsorbed pollutants to the soil and rhizosphere below. After uptake in the roots and leaves, plants can metabolize, sequestrate and/or excrete air pollutants. In addition, plant-associated microorganisms play an important role by degrading, detoxifying or sequestrating the pollutants and by promoting plant growth. In this review, an overview of the available knowledge about the role and potential of plant–microbe interactions to improve indoor and outdoor air quality is provided. Most importantly, common air pollutants (particulate matter, volatile organic compounds and inorganic air pollutants) and their toxicity are described. For each of these pollutant types, a concise overview of the specific contributions of the plant and its microbiome is presented. To conclude, the state of the art and its related future challenges are presented. PMID:26516837
Charting the trends in nuclear techniques for analysis of inorganic environmental pollutants
International Nuclear Information System (INIS)
Braun, T.
1986-01-01
Publications in Analytical Abstracts in the period 1975-1984 and papers presented at the Modern Trends in Activation Analysis international conferences series in the period 1961-1986 have been used as an empirical basis for assessing general trends in research and publication activity. Some ebbs and flows in the speciality of instrumental techniques for analysis of environmental trace pollutants are revealed by a statistical analysis of the publications. (author)
Priority setting and economic appraisal: whose priorities--the community or the economist?
Green, A; Barker, C
1988-01-01
Scarce resources for health require a process for setting priorities. The exact mechanism chosen has important implications for the type of priorities and plans set, and in particular their relationship to the principles of primary health care. One technique increasingly advocated as an aid to priority setting is economic appraisal. It is argued however that economic appraisal is likely to reinforce a selective primary health care approach through its espousal of a technocratic medical model and through its hidden but implicit value judgements. It is suggested that urgent attention is needed to develop approaches to priority setting that incorporate the strengths of economic appraisal, but that are consistent with comprehensive primary health care.
Energy Technology Data Exchange (ETDEWEB)
Jörundsdóttir, Hrönn Ólína, E-mail: hronn.o.jorundsdottir@matis.is [Matis Ltd., Icelandic Food and Biotech R and D, Vinlandsleid 12, 113 Reykjavik (Iceland); Jensen, Sophie [Matis Ltd., Icelandic Food and Biotech R and D, Vinlandsleid 12, 113 Reykjavik (Iceland); Hylland, Ketil; Holth, Tor Fredrik [Department of Biosciences, University of Oslo, P.O. Box 1066 Blindern, N-0316 Oslo (Norway); Gunnlaugsdóttir, Helga [Matis Ltd., Icelandic Food and Biotech R and D, Vinlandsleid 12, 113 Reykjavik (Iceland); Svavarsson, Jörundur [University of Iceland, Department of Life and Environmental Sciences, Askja - Natural Science Building, Sturlugata 7, 101 Reykjavík (Iceland); Ólafsdóttir, Ásdís [The University of Iceland´s Research Centre in Sudurnes, Gardvegi 1, 245 Sandgerdi (Iceland); El-Taliawy, Haitham [Matis Ltd., Icelandic Food and Biotech R and D, Vinlandsleid 12, 113 Reykjavik (Iceland); Rigét, Frank; Strand, Jakob [Department of Bioscience, Arctic Research Centre, Aarhus University, Frederiksborgvej 399, PO Box 358, DK-4000 Roskilde (Denmark); Nyberg, Elisabeth; Bignert, Anders [Swedish Museum of Natural History, P.O. Box 50007, 104 05 Stockholm (Sweden); Hoydal, Katrin S. [The Faroese Environment Agency, Traðagøta 38, P.O. Box 2048, FO-165 Argir, the Faroe Islands (Faroe Islands); Halldórsson, Halldór Pálmar [The University of Iceland´s Research Centre in Sudurnes, Gardvegi 1, 245 Sandgerdi (Iceland)
2014-09-15
As the ice cap of the Arctic diminishes due to global warming, the polar sailing route will be open larger parts of the year. These changes are likely to increase the pollution load on the pristine Arctic due to large vessel traffic from specific contaminant groups, such as polycyclic aromatic hydrocarbons (PAHs). A well-documented baseline for PAH concentrations in the biota in the remote regions of the Nordic Seas and the sub-Arctic is currently limited, but will be vital in order to assess future changes in PAH contamination in the region. Blue mussels (Mytilus edulis) were collected from remote sites in Greenland, Iceland, the Faroe Islands, Norway and Sweden as well as from urban sites in the same countries for comparison. Cod (Gadus morhua) was caught north of Iceland and along the Norwegian coast. Sixteen priority PAH congeners and the inorganic trace elements arsenic, cadmium, mercury and lead were analysed in the blue mussel samples as well as PAH metabolites in cod bile. Σ{sub 16}PAHs ranged from 28 ng/g dry weight (d.w.) (Álftafjörður, NW Iceland) to 480 ng/g d.w. (Ísafjörður, NW Iceland). Mussel samples from Mjóifjörður, East Iceland and Maarmorilik, West Greenland, contained elevated levels of Σ{sub 16}PAHs, 370 and 280 ng/g d.w., respectively. Levels of inorganic trace elements varied with highest levels of arsenic in mussels from Ísafjörður, Iceland (79 ng/g d.w.), cadmium in mussels from Mjóifjörður, Iceland (4.3 ng/g d.w.), mercury in mussels from Sørenfjorden, Norway (0.23 ng/g d.w.) and lead in mussels from Maarmorilik, Greenland (21 ng/g d.w.). 1-OH-pyrene was only found above limits of quantification (0.5 ng/mL) in samples from the Norwegian coast, ranging between 44 and 140 ng/ml bile. Generally, PAH levels were low in mussels from the remote sites investigated in the study, which indicates limited current effect on the environment. - Highlights: • Low levels of PAHs in blue mussels from remote areas of the Arctic. • Low
International Nuclear Information System (INIS)
McColl, S.; Gower, S.; Hicks, J.; Shortreed, J.; Craig, L.
2004-01-01
This paper presents the concept and methodologies behind the development of a health effects priority ranking tool for the reduction of air emissions from oil refineries. The Health Effects Indicators Decision Index- Versions 2 (Heidi II) was designed to assist policy makers in prioritizing air emissions reductions on the basis of estimated risk to human health. Inputs include facility level rankings of potential health impacts associated with carcinogenic air toxics, non-carcinogenic air toxics and criteria air contaminants for each of the 20 refineries in Canada. Rankings of estimated health impacts are presented on predicted incidence of health effects. Heidi II considers site-specific annual pollutant emission data, ambient air concentrations associated with releases and concentration response functions for various types of health effects. Additional data includes location specific background air concentrations, site-specific population densities, and the baseline incidence of different health effects endpoints, such as cancer, non-cancer illnesses and cardiorespiratory illnesses and death. Air pollutants include the 29 air toxics reported annually in Environment Canada's National Pollutant Release Inventory. Three health impact ranking outputs are provided for each facility: ranking of pollutants based on predicted number of annual cases of health effects; ranking of pollutants based on simplified Disability Adjusted Life Years (DALYs); and ranking of pollutants based on more complex DALYs that consider types of cancer, systemic disease or types of cardiopulmonary health effects. Rankings rely on rough statistical estimates of predicted incidence rates for health endpoints. The models used to calculate rankings can provide useful guidance by comparing estimated health impacts. Heidi II has demonstrated that it is possible to develop a consistent and objective approach for ranking priority reductions of air emissions. Heidi II requires numerous types and
Inorganic treatments for the consolidation and protection of stone artefacts
Directory of Open Access Journals (Sweden)
Mauro Matteini
2008-04-01
Full Text Available Consolidation and protection are two of the principal kinds of treatments through which the decay of old statues, stone facades, plasters and mural paintings caused by both natural atmospheric agents and, above all in the last five decades, by atmospheric pollution, is faced. The most traditional approach has been and is mainly based on the use of organic polymeric materials. They offer the advantage of easy application procedures and the possibility to obtain, at short times, very satisfying results. Different is their behaviour at long times. Some drawbacks come out over time both under the esthetical point of view as well as to the durability, compatibility and efficacy. Particularly critical is the situation when porous materials and soluble salts - gypsum above all - are simultaneously present. In such a situation inorganic treatments demonstrate to be much more appropriate. They assure durable and compatible results. In the present paper two of the most efficient and appropriate inorganic methods are reviewed in detail: the barium hydroxide method, both as desulfating and consolidating agent, and the ammonium oxalate method as passivating agent, consolidant and as a treatment capable of improving the natural colour contrast of the stone, when it is lost due to decay processes.
Marine environment pollution: The contribution of mass spectrometry to the study of seawater.
Magi, Emanuele; Di Carro, Marina
2016-09-09
The study of marine pollution has been traditionally addressed to persistent chemicals, generally known as priority pollutants; a current trend in environmental analysis is a shift toward "emerging pollutants," defined as newly identified or previously unrecognized contaminants. The present review is focused on the peculiar contribution of mass spectrometry (MS) to the study of pollutants in the seawater compartment. The work is organized in five paragraphs where the most relevant groups of pollutants, both "classical" and "emerging," are presented and discussed, highlighting the relative data obtained by the means of different MS techniques. The hyphenation of MS and separative techniques, together with the development of different ion sources, makes MS and tandem MS the analytical tool of choice for the determination of trace organic contaminants in seawater. © 2016 Wiley Periodicals, Inc. Mass Spec Rev. © 2016 Wiley Periodicals, Inc.
Directory of Open Access Journals (Sweden)
Audrius Čereška
2016-06-01
Full Text Available Air pollution with various materials, particularly with aerosols, increases with the advances in technological development. This is a complicated global problem. One of the priorities in achieving sustainable development is the reduction of harmful technological effects on the environment and human health. It is a responsibility of researchers to search for effective methods of reducing pollution. The reliable results can be obtained by combining the approaches used in various fields of science and technology. This paper aims to demonstrate the effectiveness of the multiple attribute decision-making (MADM methods in investigating and solving the environmental pollution problems. The paper presents the study of the process of the evaporation of a toxic liquid based on using the MADM methods. A schematic view of the test setup is presented. The density, viscosity, and rate of the released vapor flow are measured and the dependence of the variation of the solution concentration on its temperature is determined in the experimental study. The concentration of hydrochloric acid solution (HAS varies in the range from 28% to 34%, while the liquid is heated from 50 to 80 °C. The variations in the parameters are analyzed using the well-known VIKOR and COPRAS MADM methods. For determining the criteria weights, a new CILOS (Criterion Impact LOSs method is used. The experimental results are arranged in the priority order, using the MADM methods. Based on the obtained data, the technological parameters of production, ensuring minimum environmental pollution, can be chosen.
45 CFR 2531.20 - Funding priorities.
2010-10-01
... priorities. The Corporation may choose to set priorities (and to periodically revise such priorities) that... given fiscal year. In setting these priorities, the Corporation will seek to concentrate funds on those... 45 Public Welfare 4 2010-10-01 2010-10-01 false Funding priorities. 2531.20 Section 2531.20 Public...
Directory of Open Access Journals (Sweden)
Dojčinović Biljana P.
2012-01-01
Full Text Available Inorganic salts improve the coloration of textiles, which increase pollution load on dyehouse effluent in general. Decolorization of reactive textile dye C.I. Reactive Black 5 was studied using Advanced Oxidation Processes (AOPs in a non-thermal plasma reactor, based on coaxial water falling film Dielectric Barrier Discharge (DBD. Initial dye concentration in the solution was 40.0 mg L-1. The effects of addition of inorganic salt different high concentrations (NaCl, Na2SO4 and Na2CO3 on the degree of decolorization were studied. Recirculation of dye solution through the DBD reactor with applied energy density 45-315 kJ L-1 was used. The influence of residence time was investigated after 5 minutes and 24 hours of plasma treatment. Decolorization of the dyes was monitored by spectrophotometric measurement. Changes of pH values and the conductivity of dye solution after each recirculation were tested. The most effective decolorization of over 90% was obtained with the addition of NaCl (50 g L-1, applied energy density of 135 kJ L-1 and after residence time of 24 hours of plasma treatment. Decolorization of solutions containing inorganic salts Na2SO4 and Na2CO3 were lower than for the solution without salt.
Pollution Impact and Alternative Treatment for Produced Water
Directory of Open Access Journals (Sweden)
Hedar Yusran
2018-01-01
Full Text Available Oil and gas exploration and production are two of the activities that potentially cause pollution and environmental damage. The largest waste generated from this activity is produced water. Produced water contains hazardous pollutants of both organic and inorganic materials, so that the produced water of oil and gas production cannot be discharged directly to the environment. Uncontrolled discharge can lead to the environmental damage, killing the life of water and plants. The produced water needs to be handled and fulfill the quality standards before being discharged to the environment. Several studies to reduce the contaminants in the produced water were conducted by researchers. Among them were gravity based separation - flotation, separation technique based on filtration, and biological process treatment. Therefore, some of these methods can be used as an alternative waste handling of produced water.
Negative impact of inorganic pollutants transport from landfill
International Nuclear Information System (INIS)
Lima Cazorla, Lazaro; Olivares Rieumnot, Susana; De La Rosa Medero, Daniel; Santana, Jorge Luis; Garcia, Damarys; Melchor, Kenia; Garcia, Mercedes; Aguilera, Yuri
2006-01-01
Heavy metals concentrations are evaluated in four sampling stations located in the Almendares river to estimate the influence of the leachate from 100 street landfill. The studied metals were Ni, Cr, Cd, Pb, Cu and Zn and the determinations were carried out in waters and sediments in March 2004. In the case of the waters the contents of dissolved metals were low, in most of the cases less than the levels recommended in the drinking water guidelines for Cuba. The high organic matter content and pH values of the water (higher to 7) are factors that may contribute to the precipitation of metals. The contents of metals in the river Almendares sediments were high in most of the cases. The highest metals levels were found in the sampling station located near the landfill. A decrease of the metals content was verified in the sediments when the distance of the evaluated polluting source was increased. Taken into account the enrichment factors for Cr, Cd, Pb, Cu y Zn the total content surpass the level for a lithogenous material. Furthermore, it shows the importance of the anthropogenic metals inputs. Using the method of sequential extractions we found that the organic matter in the sediment fulfils an important role in the immobilization of the metals. The results obtained in the investigation indicate that 100 street leachate could constitute an important source of contamination of the river related to heavy metals. That's why it is necessary to implement a solution for the treatment of the leachate or for to avoid the disposition in the river
Latest Achievements on Climate Change and Forest Interactions in a Polluted Environment
DEFF Research Database (Denmark)
Carriero, Giulia; Tuovinen, Juha-Pekka; Clarke, Nicholas
2014-01-01
the information from European forest research/monitoring networks; the development of a new concept of forest sites for research and monitoring (Supersites); the identification of the main knowledge gaps; and the definition of priorities for forest adaptation to climate change in a polluted environment...... pollution dynamics into prospects for forest research and monitoring, with focus on the carbon, ozone, nitrogen and water budgets. The aim of this paper is to summarize scientific activities and achievements of MAFor: the creation of a meta-database for highlighting the available data and integrating...
Huang, Yi-Min; Liu, Zi-Rui; Chen, Hong; Wang, Yue-Si
2013-04-01
To investigate the size distribution characteristics of water soluble inorganic ions in haze days, the particle samples were collected by two Andersen cascade impactors in Beijing during summer and winter time and each sampling period lasted two weeks. Online measurement of PM10 and PM2.5 using TEOM were also conducted at the same time. Sources and formation mechanism of water soluble inorganic ions were analyzed based on their size distributions. The results showed that average concentrations of PM10 and PM 2.5 were (245.5 +/- 8.4) microg x m(-3) and (120.2 +/- 2.0) microg x m(-3) during summer haze days (SHD), and were (384.2 +/- 30.2) microg x m(-3) and (252.7 +/- 47.1) microg x m(-3) during winter haze days (WHD), which suggested fine particles predominated haze pollution episode in both seasons. Total water-soluble inorganic ions concentrations were higher in haze days than those in non-haze days, especially in fine particles. Furthermore, concentrations of secondary inorganic ions (SO4(2-), NO3(-) and NH4(+)) increased quicker than other inorganic ions in fine particles during haze days, indicating secondary inorganic ions played an important role in the formation of haze pollution. Similar size distributions were found for all Sinorganic water soluble ions except for NO3(-), during SHD and WHD. SO4(2-) and NH4(+) dominated in the fine mode (PM1.0) while Mg2+ and Ca2+ accumulated in coarse fraction, Na+, Cl- and K+ showed a bimodal distribution. For NO3(-), however, it showed a bimodal distribution during SHD and a unimodal distribution dominated in the fine fraction was found during WHD. The average mass median aerodynamic diameter (MMAD) of SO4(2-) was 0.64 microm in SHD, which suggested the formation of SO4(2-) was mainly attributed to in-cloud processes. Furthermore, a higher apparent conversion rate of sulfur dioxide (SOR) was found in SHD, indicating more fine particles were produced by photochemical reaction in haze days than that in non-haze days. The
International Nuclear Information System (INIS)
Genet, M.; Brandel, V.
1988-01-01
The optimum pH and concentration values of thorium salts and oxoacids or oxoacid salts which lead to transparent and stable inorganic gels have been determined. The isotherm drying process of the gel at 50 0 C leads successively to a partly dehydrated gel, then, to the formation of an unusual liquid phase and, finally to a dry amorphous solid phase which is still transparent. This kind of transparent inorganic gels and amorphous phase can be used as matrices for spectroscopic studies [fr
Hayward, J. A.
Agricultural extension is one component in an array including research, training, education, marketing, international trade, etc. which develop together to bring about growth, and sustained growth determines the priorities for extension. These priorities depend inevitably on the stage of development of a country or region, and on the current…
Demkowska, Ilona; Polkowska, Żaneta; Kiełbratowska, Bogumiła; Namieśnik, Jacek
2010-11-01
Tobacco smoking constitutes a significant source of indoor air pollution. Various chemical compounds that are emitted during tobacco smoking can have a direct cytotoxic effect on spermatozoa by damaging DNA. There is some evidence that tobacco smoking in men could affect male fertility. The goals of this study were to find relationships between thiocyanates (as biomarkers of environmental tobacco smoke exposure) and other inorganic ions in human semen samples and present the effectiveness of the proposed sample preparation procedure combined with ion chromatography technique for the determination of inorganic ions, especially thiocyanates, in human semen samples collected from heavy, moderate, and passive smokers, as well as nonsmoking individuals.
Energy Technology Data Exchange (ETDEWEB)
Boehm, E.; Hillenbrand, T.; Marscheider-Weidemann, F.; Mueller, B.; Wiederhold, J.; Herrchen, M.; Klein, M.
2002-12-01
The Water Framework Directive (2000/60/EC) is a new instrument, that inter alia has replaced, harmonized and further developed the control and reduction of point and diffuse discharges of dangerous substances according to Council Directive 76/464/EEC. Article 16 of the Water Framework Directive set out a 'Strategy against pollution of water' which demands specific measures against pollution of water by individual pollutants or groups of pollutants presenting a significant risk to or via the aquatic environment (e.g. by drinking water consumed). For these priority substances community-wide water quality standards and emission controls have to be established. On the basis of Article 16 of Directive 2000/60/EC a list of 33 priority substances has been adopted by the decision of the European Parliament and of the Council of November 2001. This list identifies 11 priority hazardous substances, 14 substances subject to a review for identification as possible priority hazardous substance and 8 priority substances. The Commission will make a proposal for the final classification of the 'substances subject to a review' (priority hazardous or priority substances) not later than 12 months after adoption of this list. The planned measures aim at the cessation or phasing out of discharges, emissions and losses to the aquatic environment within 20 years for the priority hazardous substances and at the progressive reduction for the priority substances. In this project the available data for these 33 substances resp. groups of substances for the Federal Republic of Germany were put forward and described in a standardized pattern. This pattern includes the following items: nomenclature and properties of the substances, monitoring data, production and fields of application of these substances, existing regulations in Germany, releases to environment and possibilities to reduce discharges to the aquatic environment. The basis of the data is the year 2000 as far as
Hanford Site waste minimization and pollution prevention awareness program plan
International Nuclear Information System (INIS)
1994-05-01
The Hanford Site WMin/P2 program is an organized, comprehensive, and continual effort to systematically reduce the quantity and toxicity of hazardous, radioactive, mixed, and sanitary wastes; conserve resources; and prevent or minimize pollutant releases to all environmental media from all Site activities. The Hanford Site WMin/P2 program plan reflects national and DOE waste minimization and pollution prevention goals and policies, and represents an ongoing effort to make WMin/P2 part of the Site operating philosophy. In accordance with these policies, a hierarchical approach to environmental management has been adopted and is applied to all types of polluting and waste generating activities. Pollution prevention and waste minimization through source reduction are first priority in the Hanford WMin/P2 program, followed by environmentally safe recycling. Treatment to reduce the quantity, toxicity, and/or mobility will be considered only when prevention or recycling are not possible or practical. Environmentally safe disposal is the last option
Abaya, Leilani M; Wiegner, Tracy N; Colbert, Steven L; Beets, James P; Carlson, Kaile'a M; Kramer, K Lindsey; Most, Rebecca; Couch, Courtney S
2018-04-01
Sewage pollution is contributing to the global decline of coral reefs. Identifying locations where it is entering waters near reefs is therefore a management priority. Our study documented shoreline sewage pollution hotspots in a coastal community with a fringing coral reef (Puakō, Hawai'i) using dye tracer studies, sewage indicator measurements, and a pollution scoring tool. Sewage reached shoreline waters within 9 h to 3 d. Fecal indicator bacteria concentrations were high and variable, and δ 15 N macroalgal values were indicative of sewage at many stations. Shoreline nutrient concentrations were two times higher than those in upland groundwater. Pollution hotspots were identified with a scoring tool using three sewage indicators. It confirmed known locations of sewage pollution from dye tracer studies. Our study highlights the need for a multi-indicator approach and scoring tool to identify sewage pollution hotspots. This approach will be useful for other coastal communities grappling with sewage pollution. Copyright © 2018 Elsevier Ltd. All rights reserved.
Golub, Alexander; Strukova, Elena
2008-01-01
Since 1997, more than 30 health-risk analyses were conducted using Russian data sets. These studies demonstrated that air pollution is the most important environmental contributor toward morbidity and mortality risk in Russia, with 90% of the total human health risk coming from the criteria pollutants total suspended particulate (TSP), SO2, and NO(x). This article contributes to the ongoing discussion of the magnitude of this health issue in Russia by providing an estimate of both the mortality rate attributed to airborne pollutants and the associated economic damages. The 90% confidence interval of mortality is 46,000-132,000, and the associated economic damages are between 2.6 and 6.5% of gross domestic product (GDP). The largest source of uncertainty in mortality is the concentration-response parameter, accounting for 50-60% of the total variability in the estimate. The point estimate of 87,000 implies that mortality due to airborne pollutants is threefold higher than reported due to tuberculosis, twofold due to transportation accidents, and about the same as that from suicide and homicide combined. By 2002 there was enough evidence regarding potential health hazard and air pollution exposure in Russia to start environmental management reform. In 2004 Russia officially adopted guidelines for health risk analysis associated with air pollution. The next step is to use this health-risk assessment approach as a lead for sensible reforms of the emissions-permit system and environmental finance.
Priorities of statutory claimants
International Nuclear Information System (INIS)
Pawluck, B.K.; Prowse, J.T.
1996-01-01
The statutory rights that unpaid creditors have when an oil or gas operator is placed in bankruptcy, were evaluated. Those statutory rights may give priority to their claims against the operator. Fifteen topics dealing with statutory priorities were examined, focusing on the change in priorities which would occur if the insolvent operator were placed in bankruptcy. The topics were: (1) Summary of statutory federal and provincial priorities, (2) Revenue Canada - source deductions/deemed trust, (3) Revenue Canada - source deductions/enhanced requirement to pay, (4) Revenue Canada - goods and service tax (GST)/deemed trust, (5) Revenue Canada - GST/enhanced requirement to pay, (6) Federal income taxes, (7) Validity of provincially legislated priority provisions in bankruptcy, (8) Provincially authorized municipal taxes - real property, (9) Provincial workers' compensation board, (10) Provincially legislated wages, overtime pay and holiday pay, (11) Provincially legislated severance/termination pay, (12) Provincially legislated successor employer obligations, (13) Provincially legislated private employment pension plans, (14) Provincial health care insurance premiums, and (15) Provincial freehold mineral rights tax
Organic pollutant removal from edible oil process wastewater using electrocoagulation
Sharma, S.; Can, O. T.; Hammed, M.; Nawarathna, D.; Simsek, H.
2018-03-01
Wastewaters generated from vegetable oil industries contain a high concentration of organic pollutants that are detrimental to the aquatic ecosystem. Electrochemical processes are gaining importance in the treatment of inorganic and resistant organic pollutants in wastewaters. In this study, electrocoagulation (EC) was applied to remove organic pollutants and oil and grease from canola oil wastewater using aluminum (Al) and iron (Fe) electrodes. The application of EC in the wastewater achieved more than 80% removal of organic carbon and nearly 100% removal of suspended solids (SS). The effectiveness of EC is influenced mainly by current density, pH, electrolyte (NaCl), electrode contact time and electrode type. It was observed that Al electrode combination yielded better removal at a lesser time compared to that of Fe electrodes. However, varying current densities had its significance in terms of coagulation time only. Increase in current density achieved decrease in coagulation time. Both Al and Fe could remove between 52-59% of oil and grease from canola oil wastewater
The Chemophytostabilisation Process of Heavy Metal Polluted Soil.
Grobelak, Anna; Napora, Anna
2015-01-01
Industrial areas are characterised by soil degradation processes that are related primarily to the deposition of heavy metals. Areas contaminated with metals are a serious source of risk due to secondary pollutant emissions and metal leaching and migration in the soil profile and into the groundwater. Consequently, the optimal solution for these areas is to apply methods of remediation that create conditions for the restoration of plant cover and ensure the protection of groundwater against pollution. Remediation activities that are applied to large-scale areas contaminated with heavy metals should mainly focus on decreasing the degree of metal mobility in the soil profile and metal bioavailability to levels that are not phytotoxic. Chemophytostabilisation is a process in which soil amendments and plants are used to immobilise metals. The main objective of this research was to investigate the effects of different doses of organic amendments (after aerobic sewage sludge digestion in the food industry) and inorganic amendments (lime, superphosphate, and potassium phosphate) on changes in the metals fractions in soils contaminated with Cd, Pb and Zn during phytostabilisation. In this study, the contaminated soil was amended with sewage sludge and inorganic amendments and seeded with grass (tall fescue) to increase the degree of immobilisation of the studied metals. The contaminated soil was collected from the area surrounding a zinc smelter in the Silesia region of Poland (pH 5.5, Cd 12 mg kg-1, Pb 1100 mg kg-1, Zn 700 mg kg-1). A plant growth experiment was conducted in a growth chamber for 5 months. Before and after plant growth, soil subsamples were subjected to chemical and physical analyses. To determine the fractions of the elements, a sequential extraction method was used according to Zeien and Brümmer. Research confirmed that the most important impacts on the Zn, Cd and Pb fractions included the combined application of sewage sludge from the food industry and
The Chemophytostabilisation Process of Heavy Metal Polluted Soil.
Directory of Open Access Journals (Sweden)
Anna Grobelak
Full Text Available Industrial areas are characterised by soil degradation processes that are related primarily to the deposition of heavy metals. Areas contaminated with metals are a serious source of risk due to secondary pollutant emissions and metal leaching and migration in the soil profile and into the groundwater. Consequently, the optimal solution for these areas is to apply methods of remediation that create conditions for the restoration of plant cover and ensure the protection of groundwater against pollution. Remediation activities that are applied to large-scale areas contaminated with heavy metals should mainly focus on decreasing the degree of metal mobility in the soil profile and metal bioavailability to levels that are not phytotoxic. Chemophytostabilisation is a process in which soil amendments and plants are used to immobilise metals. The main objective of this research was to investigate the effects of different doses of organic amendments (after aerobic sewage sludge digestion in the food industry and inorganic amendments (lime, superphosphate, and potassium phosphate on changes in the metals fractions in soils contaminated with Cd, Pb and Zn during phytostabilisation. In this study, the contaminated soil was amended with sewage sludge and inorganic amendments and seeded with grass (tall fescue to increase the degree of immobilisation of the studied metals. The contaminated soil was collected from the area surrounding a zinc smelter in the Silesia region of Poland (pH 5.5, Cd 12 mg kg-1, Pb 1100 mg kg-1, Zn 700 mg kg-1. A plant growth experiment was conducted in a growth chamber for 5 months. Before and after plant growth, soil subsamples were subjected to chemical and physical analyses. To determine the fractions of the elements, a sequential extraction method was used according to Zeien and Brümmer. Research confirmed that the most important impacts on the Zn, Cd and Pb fractions included the combined application of sewage sludge from the
Environmental assessment for 881 Hillside (High Priority Sites) interim remedial action
International Nuclear Information System (INIS)
1990-01-01
This Environmental Assessment evaluates the impact of an interim remedial action proposed for the High Priority Sites (881 Hillside Area) at the Rocky Flats Plant (RFP). This interim action is to be conducted to minimize the release of hazardous substances from the 881 Hillside Area that pose a potential long-term threat to public health and the environment. This document integrates current site characterization data and environmental analyses required by the Comprehensive Environmental Response, Compensation and Liability Act (CERCLA) or ''Superfund'' process, into an environmental assessment pursuant to the National Environmental Policy Act (NEPA). Characterization of the 881 Hillside Area is continuing. Consequently, a final remedial action has not yet been proposed. Environmental impacts associated with the proposed interim remedial action and reasonable alternatives designed to remove organic and inorganic contaminants, including radionuclides, from alluvial groundwater in the 881 Hillside Area are addressed. 24 refs., 5 figs., 23 tabs
2011-07-29
... recordkeeping requirements, Superfund, Water pollution control, Water supply. Dated: July 22, 2011. Al..., engine repairs, and line leak repairs followed by pressure tests. A flare was located on-site to burn excess gases and liquids produced during facility operations. The surface water migration pathway was...
Directory of Open Access Journals (Sweden)
E. Morabito
2014-01-01
Full Text Available The Venice Lagoon is subjected to long-range transport of contaminants via aerosol from the near Po Valley. Moreover, it is an area with significant local anthropogenic emissions due to the industrial area of Porto Marghera, the urban centres, and the glass factories and with emissions by ships traffic within the Lagoon. Furthermore, since 2005, the Lagoon has also been affected by the construction of the MOSE (Modulo Sperimentale Elettromeccanico—Electromechanical Experimental Module mobile dams, as a barrier against the high tide. This work presents and discusses the results from chemical analyses of bulk depositions, carried out in different sites of the Venice Lagoon. Fluxes of pollutants were also statistically analysed on PCA with the aim of investigating the spatial variability of depositions and their correlation with precipitations. Fluxes of inorganic pollutants depend differently on precipitations, while organic compounds show a more seasonal trend. The statistical analysis showed that the site in the northern Lagoon has lower and almost homogeneous fluxes of pollutants, while the other sites registered more variable concentrations. The study also provided important information about the annual trend of pollutants and their evolution over a period of about five years, from 2005 to 2010.
Hybrid polymer-inorganic photovoltaic cells
Beek, W.J.E.; Janssen, R.A.J.; Merhari, L.
2009-01-01
Composite materials made from organic conjugated polymers and inorganic semiconductors such as metal oxides attract considerable interest for photovoltaic applications. Hybrid polymer-inorganic solar cells offer the opportunity to combine the beneficial properties of the two materials in charge
Directory of Open Access Journals (Sweden)
B. Zhao
2017-10-01
Full Text Available The Beijing–Tianjin–Hebei (BTH region has been suffering from the most severe fine-particle (PM2. 5 pollution in China, which causes serious health damage and economic loss. Quantifying the source contributions to PM2. 5 concentrations has been a challenging task because of the complicated nonlinear relationships between PM2. 5 concentrations and emissions of multiple pollutants from multiple spatial regions and economic sectors. In this study, we use the extended response surface modeling (ERSM technique to investigate the nonlinear response of PM2. 5 concentrations to emissions of multiple pollutants from different regions and sectors over the BTH region, based on over 1000 simulations by a chemical transport model (CTM. The ERSM-predicted PM2. 5 concentrations agree well with independent CTM simulations, with correlation coefficients larger than 0.99 and mean normalized errors less than 1 %. Using the ERSM technique, we find that, among all air pollutants, primary inorganic PM2. 5 makes the largest contribution (24–36 % to PM2. 5 concentrations. The contribution of primary inorganic PM2. 5 emissions is especially high in heavily polluted winter and is dominated by the industry as well as residential and commercial sectors, which should be prioritized in PM2. 5 control strategies. The total contributions of all precursors (nitrogen oxides, NOx; sulfur dioxides, SO2; ammonia, NH3; non-methane volatile organic compounds, NMVOCs; intermediate-volatility organic compounds, IVOCs; primary organic aerosol, POA to PM2. 5 concentrations range between 31 and 48 %. Among these precursors, PM2. 5 concentrations are primarily sensitive to the emissions of NH3, NMVOC + IVOC, and POA. The sensitivities increase substantially for NH3 and NOx and decrease slightly for POA and NMVOC + IVOC with the increase in the emission reduction ratio, which illustrates the nonlinear relationships between precursor emissions and PM
INFLUENCE OF INORGANIC COMPOUNDS ON THE PROCESS OF PHOTOCATALYSIS OF BIOLOGICALLY ACTIVE COMPOUNDS
Directory of Open Access Journals (Sweden)
Edyta Kudlek
2017-07-01
Full Text Available Constant increase in concentration of organic micropollutants in the water environment influences the development of methods for their effective elimination from various matrices released into aquatic ecosystems. One of widely described in literature processes for the decomposition of hardly-biodegradable pollutants is the process of heterogeneous photocatalysis. The paper presents the influence of inorganic substances on the decomposition of polycyclic aromatic hydrocarbons (anthracene and benzo[a]pyrene, industrial admixtures - octylphenol and pharmaceutical compounds - diclofenac in the photocatalysis process conducted in the presence of TiO2. It has been shown that the presence of Cl- ions did not affect the photochemical reaction of the micropollutant decomposition. Whereas, the presence of CO3(2-, SO4(2- and HPO4(2- ions inhibited the decolonization of octylphenol and diclofenac, while the degradation efficiency of anthracene and benzo[a]pyrene was reduced only by the presence of CO3(2- and HCO3- anions. The photooxidation of micropollutants in solutions containing Al(3+ oraz Fe(3+ cations proceeded with a much lower efficiency than that for solution without inorganic compounds. The analysis of the kinetics of the photocatalytic decomposition of selected micropollutants show a decrease in the reaction rate constant and an increase in their half-life due to the blocking of theactive semiconductor centers by inorganic compounds. In addition,the toxicological analysis inducated the generation of micropollutant oxidation by-products, which aggravate the quality of treated aqueous solutions.
2014-08-14
The Assistant Secretary for Special Education and Rehabilitative Services announces a priority under the Assistive Technology Alternative Financing Program administered by the Rehabilitation Services Administration (RSA). The Assistant Secretary may use this priority for competitions in fiscal year (FY) 2014 and later years. This priority is designed to ensure that the Department funds high-quality assistive technology (AT) alternative financing programs (AFPs) that meet rigorous standards in order to enable individuals with disabilities to access and acquire assistive technology devices and services necessary to achieve education, community living, and employment goals.
Need for new perspectives in pollution control
Energy Technology Data Exchange (ETDEWEB)
Charles, F M
1977-01-01
Environmental responsibility by corporations, nations, and society as a whole requires a national environment to nurture commitment and relax tensions between the private and public sectors. A review of the progress made in meeting the 1972 Water Pollution Control Act's goals demonstrates industry's commitment to both the cause and the timetable set by the Act. Speaking for Union Carbide, the author uses capital outlay, the number of employees involved in pollution abatement, and the number of technical advances developed by the corporation to improve pollution problems to illustrate his points. Municipalities, by contrast, lag in meeting the required upgrading of municipal waste water treatment. When the 1972 Act was written it was assumed that prosperity would continue and the goal of ''best available'' control technology in place for industrial waste water seemed reasonable. New priorities have emerged, however, and the case is made for postponing the requirements until the social and economic effects are more certain and until the goals can be re-evaluated to see if the costs and benefits justify a zero discharge goal. (DCK)
QUEUEING DISCIPLINES BASED ON PRIORITY MATRIX
Directory of Open Access Journals (Sweden)
Taufik I. Aliev
2014-11-01
Full Text Available The paper deals with queueing disciplines for demands of general type in queueing systems with multivendor load. A priority matrix is proposed to be used for the purpose of mathematical description of such disciplines, which represents the priority type (preemptive priority, not preemptive priority or no priority between any two demands classes. Having an intuitive and simple way of priority assignment, such description gives mathematical dependencies of system operation characteristics on its parameters. Requirements for priority matrix construction are formulated and the notion of canonical priority matrix is given. It is shown that not every matrix, constructed in accordance with such requirements, is correct. The notion of incorrect priority matrix is illustrated by an example, and it is shown that such matrixes do not ensure any unambiguousness and determinacy in design of algorithm, which realizes corresponding queueing discipline. Rules governing construction of correct matrixes are given for canonical priority matrixes. Residence time for demands of different classes in system, which is the sum of waiting time and service time, is considered as one of the most important characteristics. By introducing extra event method Laplace transforms for these characteristics are obtained, and mathematical dependencies are derived on their basis for calculation of two first moments for corresponding characteristics of demands queueing
Land cover, land use changes and air pollution in Asia: a synthesis
Vadrevu, Krishna; Ohara, Toshimasa; Justice, Chris
2017-12-01
A better understanding of land cover/land use changes (LCLUC) and their interactions with the atmospheric environment is essential for the sustainable management of natural resources, environmental protection, air quality, agricultural planning and food security. The 15 papers published in this focus issue showcase a variety of studies relating to drivers and impacts of LCLUC and air pollution in different South/Southeast Asian (S/SEA) countries. This synthesis article, in addition to giving context to the articles in this focus issue, also reviews the broad linkages between population, LCLUC and air pollution. Additionally, we identify knowledge gaps and research priorities that are essential in addressing air pollution issues in the region. We conclude that for effective pollution mitigation in S/SEA countries, quantifying drivers, sources and impacts of pollution need a thorough data analysis through ground-based instrumentation, models and integrated research approaches. We also stress the need for the development of sustainable technologies and strengthening the scientific and resource management communities through capacity building and training activities to address air pollution issues in S/SEA countries.
International Nuclear Information System (INIS)
Morani, Arianna; Nowak, David J.; Hirabayashi, Satoshi; Calfapietra, Carlo
2011-01-01
Highest priority zones for tree planting within New York City were selected by using a planting priority index developed combining three main indicators: pollution concentration, population density and low canopy cover. This new tree population was projected through time to estimate potential air quality and carbon benefits. Those trees will likely remove more than 10 000 tons of air pollutants and a maximum of 1500 tons of carbon over the next 100 years given a 4% annual mortality rate. Cumulative carbon storage will be reduced through time as carbon loss through tree mortality outweighs carbon accumulation through tree growth. Model projections are strongly affected by mortality rate whose uncertainties limit estimations accuracy. Increasing mortality rate from 4 to 8% per year produce a significant decrease in the total pollution removal over a 100 year period from 11 000 tons to 3000 tons. - Highlights: → The manuscript is part of the IUFRO Special section 'Adaptation of Forest Ecosystems to Air Pollution and Climate Change' (Elena Paoletti and Yusuf Serengil Eds.) approved by William J. Manning. → It has been already peer-reviewed and accepted outside EES. → The reference number of this manuscript is IUFRO49. - Carbon and air pollutant uptake by urban forests are highly influenced by mortality rates.
Energy Technology Data Exchange (ETDEWEB)
Morani, Arianna [Institute of Agro-Environmental and Forest Biology (IBAF), National Research Council (CNR) Via Salaria km 29300, 00015 Monterotondo Scalo, Roma (Italy); Nowak, David J.; Hirabayashi, Satoshi [USDA Forest Service, Northern Research Station, 5 Moon Library, SUNY-ESF, Syracuse, NY 13210 (United States); Calfapietra, Carlo, E-mail: carlo.calfapietra@ibaf.cnr.it [Institute of Agro-Environmental and Forest Biology (IBAF), National Research Council (CNR) Via Salaria km 29300, 00015 Monterotondo Scalo, Roma (Italy)
2011-05-15
Highest priority zones for tree planting within New York City were selected by using a planting priority index developed combining three main indicators: pollution concentration, population density and low canopy cover. This new tree population was projected through time to estimate potential air quality and carbon benefits. Those trees will likely remove more than 10 000 tons of air pollutants and a maximum of 1500 tons of carbon over the next 100 years given a 4% annual mortality rate. Cumulative carbon storage will be reduced through time as carbon loss through tree mortality outweighs carbon accumulation through tree growth. Model projections are strongly affected by mortality rate whose uncertainties limit estimations accuracy. Increasing mortality rate from 4 to 8% per year produce a significant decrease in the total pollution removal over a 100 year period from 11 000 tons to 3000 tons. - Highlights: > The manuscript is part of the IUFRO Special section 'Adaptation of Forest Ecosystems to Air Pollution and Climate Change' (Elena Paoletti and Yusuf Serengil Eds.) approved by William J. Manning. > It has been already peer-reviewed and accepted outside EES. > The reference number of this manuscript is IUFRO49. - Carbon and air pollutant uptake by urban forests are highly influenced by mortality rates.
Thornton, Steven F.; Tellam, John H.; Lerner, David N.
2000-05-01
The attenuation of inorganic contaminants in acetogenic and methanogenic landfill leachate by calcareous and carbonate-deficient, oxide-rich Triassic sandstone aquifer materials from the English Midlands was examined in laboratory columns. Aqueous equilibrium speciation modelling, simple transport modelling and chemical mass balance approaches are used to evaluate the key processes and aquifer geochemical properties controlling contaminant fate. The results indicate that leachate-rock interactions are dominated by ion-exchange processes, acid-base and redox reactions and sorption/precipitation of metal species. Leachate NH 4 is attenuated by cation exchange with the aquifer sediments; however, NH 4 migration could be described with a simple model using retardation factors. Organic acids in the acetogenic leachate buffered the system pH at low levels during flushing of the calcareous aquifer material. In contrast, equilibrium with Al oxyhydroxide phases initially buffered pH (˜4.5) during flushing of the carbonate-deficient sandstone with methanogenic leachate. This led to the mobilisation of sorbed and oxide-bound heavy metals from the aquifer sediment which migrated as a concentrated pulse at the leachate front. Abiotic reductive dissolution of Mn oxyhydroxides on each aquifer material by leachate Fe 2+ maintains high concentrations of dissolved Mn and buffers the leachate inorganic redox system. This feature is analogous to the Mn-reducing zones found in leachate plumes and in the experiments provides a sink for the leachate Fe load and other heavy metals. The availability of reactive solid phase Mn oxyhydroxides limits the duration of redox buffering and Fe attenuation by these aquifer sediments. Aquifer pH and redox buffering capacity exert a fundamental influence on leachate inorganic contaminant fate in these systems. The implications for the assessment of aquifer vulnerability at landfills are discussed and simple measurements of aquifer properties which
Inorganic and geological materials
International Nuclear Information System (INIS)
Dinnin, J.I.
1975-01-01
Recently described methods for applied inorganic analysis are reviewed from an interdisciplinary standpoint. Abstracts and periodical literature up to Nov. 1974, are included for consideration. The following areas of interest are covered: general reviews of inorganic analytical techniques; analytical techniques, areas of application, and analysis of individual elements. Selected books, monographs, and review articles on the analytical chemistry of the elements are listed. (416 references.) (U.S.)
International Occupational Therapy Research Priorities.
Mackenzie, Lynette; Coppola, Susan; Alvarez, Liliana; Cibule, Lolita; Maltsev, Sergey; Loh, Siew Yim; Mlambo, Tecla; Ikiugu, Moses N; Pihlar, Zdenka; Sriphetcharawut, Sarinya; Baptiste, Sue; Ledgerd, Richard
2017-04-01
Occupational therapy is a global profession represented by the World Federation of Occupational Therapists (WFOT). International research priorities are needed for strategic guidance on global occupational therapy practice. The objective of this study was to develop international research priorities to reflect global occupational therapy practice. A Delphi study using three rounds of electronic surveys, distributed to WFOT member organizations and WFOT accredited universities, was conducted. Data were analyzed after each round, and priorities were presented for rating and ranking in order of importance. Forty-six (53%) out of 87 WFOT member countries participated in the Delphi process. Eight research priorities were confirmed by the final electronic survey round. Differences were observed in rankings given by member organizations and university respondents. Despite attrition at Round 3, the final research priorities will help to focus research efforts in occupational therapy globally. Follow-up research is needed to determine how the research priorities are being adopted internationally.
DEFF Research Database (Denmark)
Brodal, Gerth Stølting
2013-01-01
Back in 1964 Williams introduced the binary heap as a basic priority queue data structure supporting the operations Insert and ExtractMin in logarithmic time. Since then numerous papers have been published on priority queues. This paper tries to list some of the directions research on priority qu...
Attachment of inorganic moieties onto aliphatic polyurethanes
Directory of Open Access Journals (Sweden)
Eliane Ayres
2007-06-01
Full Text Available Polyurethanes have been used in a series of applications due basically to their versatility in terms of controlling the behavior by altering basically the type of reagents used. However, for more specific and advanced applications, such as in membranes, biomaterials and sensors, well-organized and defined chemical functionalities are necessary. In this work, inorganic functionalities were incorporated into aliphatic polyurethanes (PU having different macromolecular architectures. Polyurethanes were synthesized using a polyether diol and dicyclohexylmethane 4,4' diisocyanate (H12-MDI. Polyurethanes having carboxylic acid groups were also produced by introducing 2,2- bis (hydroxymethyl propionic acid in the polymerization process. Inorganic functionalities were inserted into polyurethanes by reacting isocyanate end capped chains with aminopropyltriethoxysilane followed by tetraethoxysilane. PU having carboxylic acid groups yielded transparent samples after the incorporation of inorganic entities, as an evidence of smaller and better dispersed inorganic entities in the polymer network. FTIR and swelling measurements showed that polyurethanes having carboxylic acid groups had inorganic domains less packed, condensed and cross-linked when compared to polyurethanes with no carboxylic acid groups. Results also suggested that the progressive incorporation of inorganic moieties in both types of polyurethanes occurred in regions previously activated with inorganic functionalities, instead of by the creation of new domains. The temperatures of thermal decomposition and glass transition were also shifted to higher temperatures when inorganic functionalities were incorporated into polyurethanes.
Energy Technology Data Exchange (ETDEWEB)
Meller, E
1987-02-01
Increasing acceptance of pollution control tasks call for enhanced innovative power both of industry and politics. One pre-requisite of boosting innovation is an environmental policy concept fit into the framework of the economic policy: A clear environmental strategy stating priorities and foreseeable, fixed data for the required adjustment of industry, selection of pollution control measures by means of verifiable cost-benefit analyses in cooperation with industry, embedding environmental policy in the context of the free market system and harmonization of means and methods on an international level. (orig./HSCH).
The impact of ambient air pollution on the human blood metabolome.
Vlaanderen, J J; Janssen, N A; Hoek, G; Keski-Rahkonen, P; Barupal, D K; Cassee, F R; Gosens, I; Strak, M; Steenhof, M; Lan, Q; Brunekreef, B; Scalbert, A; Vermeulen, R C H
2017-07-01
Biological perturbations caused by air pollution might be reflected in the compounds present in blood originating from air pollutants and endogenous metabolites influenced by air pollution (defined here as part of the blood metabolome). We aimed to assess the perturbation of the blood metabolome in response to short term exposure to air pollution. We exposed 31 healthy volunteers to ambient air pollution for 5h. We measured exposure to particulate matter, particle number concentrations, absorbance, elemental/organic carbon, trace metals, secondary inorganic components, endotoxin content, gaseous pollutants, and particulate matter oxidative potential. We collected blood from the participants 2h before and 2 and 18h after exposure. We employed untargeted metabolite profiling to monitor 3873 metabolic features in 493 blood samples from these volunteers. We assessed lung function using spirometry and six acute phase proteins in peripheral blood. We assessed the association of the metabolic features with the measured air pollutants and with health markers that we previously observed to be associated with air pollution in this study. We observed 89 robust associations between air pollutants and metabolic features two hours after exposure and 118 robust associations 18h after exposure. Some of the metabolic features that were associated with air pollutants were also associated with acute health effects, especially changes in forced expiratory volume in 1s. We successfully identified tyrosine, guanosine, and hypoxanthine among the associated features. Bioinformatics approach Mummichog predicted enriched pathway activity in eight pathways, among which tyrosine metabolism. This study demonstrates for the first time the application of untargeted metabolite profiling to assess the impact of air pollution on the blood metabolome. Copyright © 2017 Elsevier Inc. All rights reserved.
Kasiotis, Konstantinos M; Emmanouil, Christina; Anastasiadou, Pelagia; Papadi-Psyllou, Asimina; Papadopoulos, Antonis; Okay, Oya; Machera, Kyriaki
2015-01-01
Persistent chemicals and emerging pollutants are continuously detected in marine waters and biota. Out of these, polycyclic aromatic hydrocarbons (PAHs) and organochlorine pesticides (OCs) are significant contaminants with decades of presence in the marine environment. The Mediterranean Sea is an ecosystem directly affected by a variety of anthropogenic activities including industry, municipal, touristic, commercial and agricultural. The Mediterranean mussel (Mytilus galloprovincialis) is a filter feeder, which presents wide distribution. In this regard, the specific organism was used as a biological indicator for the monitoring and evaluation of pollution in the studied areas with focus on the mentioned chemical groups. Pristine Turkish sites with minimum effect from anthropogenic activities, in contrast with Greek sites which were subjected to heavy industrial and shipping activity, were selected. A gas chromatographic tandem mass spectrometric method (GC-MS/MS) was developed and validated to monitor 34 compounds (16 EPA priority PAHs and 18 OCs). Analyses of mussel samples in 2011 from sites with the limited anthropogenic pollution shores have shown the occurrence of 11 pollutants (6 PAHs, 5 OCs), while in the samples from sites with intensive activity and expected pollution, 12 PAHs and 6 OCs were detected. Biochemical and biological responses studied only in mussels samples from the sites with the highest contamination showed a situation that was under strong seasonal influence. The intensity of the response was also influenced by deployment duration. Noteworthy correlations were detected among biochemical/biological effects and between mussel body burden and these effects. Continuous monitoring of priority pollutants of East Mediterranean Sea is vital both for ecological and human risk assessment purposes. Copyright © 2014 Elsevier Ltd. All rights reserved.
2013-01-01
Last week the European Strategy Group met in Erice (Italy) to distil reams of input and months of discussion into a concise document outlining an updated Strategy for European Particle Physics. The result is a document that will be presented to the Council for feedback next month, before final approval by the Council at a special meeting in Brussels on 29 May. The Strategy process was important when it began in 2005, and is even more so today with important discoveries behind us and a changing global landscape for particle physics ahead. The draft update, it’s fair to say, contains few surprises, but there are nevertheless some weighty issues for the Council to deliberate. The top priority is, of course, the full exploitation of the LHC, but the Strategy goes further, stating unambiguously that Europe’s top priority should be the high-luminosity upgrade of the machine. Other high-priority items are accelerator R&D to ensure the long-term global future of the field. O...
Pérez-López, M; De la Casa-Resino, I; Hernández-Moreno, D; Galeano, J; Míguez-Santiyán, M P; de Castro-Lorenzo, A; Otero-Filgueiras, M; Rivas-López, O; Soler, F
2016-10-01
The aim of this study was to determine the levels of different inorganic elements (lead [Pb], mercury [Hg], and arsenic [As]) and persistent chlorinated pollutants (including polychlorinated biphenyls [PCBs] and organochlorine pesticides [OCPs]) in blood and plasma of White stork (Ciconia ciconia) nestlings from northwest (NW) Spain. The concentrations of PCBs were lower than the limit of detection in all samples. The OCPs γ-HCH, 4,4'-DDE, HCB, and endosulfan were detected most frequently in plasma from White stork nestlings. These OCPs were detected in 98, 54, 39, and 37 % of all samples, respectively. However, the concentrations of organic pollutants were lower than the risk thresholds for birds. The mean levels of the inorganic elements Pb, Hg, and As were found to be 36.92 ± 33.48, 16.48 ± 12.87, and 9.813 ± 13.84 µg/L, respectively. These levels were also lower than the risk thresholds for birds. This study not only provides a snapshot of the levels of both inorganic and organic contaminants in wild White storks in NW Spain, it also provides a useful baseline for biomonitoring levels of the measured contaminants in this area.
15 CFR 700.11 - Priority ratings.
2010-01-01
... OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE NATIONAL SECURITY INDUSTRIAL BASE REGULATIONS DEFENSE PRIORITIES AND ALLOCATIONS SYSTEM Industrial Priorities § 700.11 Priority ratings. (a) Levels of...
Engineered inorganic core/shell nanoparticles
Energy Technology Data Exchange (ETDEWEB)
Mélinon, Patrice, E-mail: patrice.melinon@univ-lyon1.fr [Institut Lumière matière Université Claude Bernard Lyon 1 et CNRS et OMNT, Domaine Scientifique de la Doua, Bâtiment Léon Brillouin, 43 Boulevard du 11 Novembre 1918, F 69622 Villeurbanne (France); Begin-Colin, Sylvie [IPCMS et OMNT, 23 rue du Loess BP 43, 67034 STRASBOURG Cedex 2 (France); Duvail, Jean Luc [IMN UMR 6502 et OMNT Campus Sciences : 2 rue de la Houssinire, BP32229, 44322 Nantes Cedex3 (France); Gauffre, Fabienne [SPM et OMNT : Institut des sciences chimiques de Rennes - UMR 6226, 263 Avenue du General Leclerc, CS 74205, 35042 RENNES Cedex (France); Boime, Nathalie Herlin [IRAMIS-NIMBE, Laboratoire Francis Perrin (CEA CNRS URA 2453) et OMNT, Bat 522, CEA Saclay, 91191 Gif sur Yvette Cedex (France); Ledoux, Gilles [Institut Lumière Matière Université Claude Bernard Lyon 1 et CNRS et OMNT, Domaine Scientifique de la Doua, Bâtiment Alfred Kastler 43 Boulevard du 11 Novembre 1918 F 69622 Villeurbanne (France); Plain, Jérôme [Universit de technologie de Troyes LNIO-ICD, CNRS et OMNT 12 rue Marie Curie - CS 42060 - 10004 Troyes cedex (France); Reiss, Peter [CEA Grenoble, INAC-SPrAM, UMR 5819 CEA-CNRS-UJF et OMNT, Grenoble cedex 9 (France); Silly, Fabien [CEA, IRAMIS, SPEC, TITANS, CNRS 2464 et OMNT, F-91191 Gif sur Yvette (France); Warot-Fonrose, Bénédicte [CEMES-CNRS, Université de Toulouse et OMNT, 29 rue Jeanne Marvig F 31055 Toulouse (France)
2014-10-20
It has been for a long time recognized that nanoparticles are of great scientific interest as they are effectively a bridge between bulk materials and atomic structures. At first, size effects occurring in single elements have been studied. More recently, progress in chemical and physical synthesis routes permitted the preparation of more complex structures. Such structures take advantages of new adjustable parameters including stoichiometry, chemical ordering, shape and segregation opening new fields with tailored materials for biology, mechanics, optics magnetism, chemistry catalysis, solar cells and microelectronics. Among them, core/shell structures are a particular class of nanoparticles made with an inorganic core and one or several inorganic shell layer(s). In earlier work, the shell was merely used as a protective coating for the core. More recently, it has been shown that it is possible to tune the physical properties in a larger range than that of each material taken separately. The goal of the present review is to discuss the basic properties of the different types of core/shell nanoparticles including a large variety of heterostructures. We restrict ourselves on all inorganic (on inorganic/inorganic) core/shell structures. In the light of recent developments, the applications of inorganic core/shell particles are found in many fields including biology, chemistry, physics and engineering. In addition to a representative overview of the properties, general concepts based on solid state physics are considered for material selection and for identifying criteria linking the core/shell structure and its resulting properties. Chemical and physical routes for the synthesis and specific methods for the study of core/shell nanoparticle are briefly discussed.
Xie, Y.; Nie, W.; Ding, A.; Huang, X.
2015-12-01
Yangtze River Delta (YRD) is one of the most typical monsoon area with probably the most largest population intensity in the world. With sharply economic development and the large anthropogenic emissions, fine particle pollution have been one of the major air quality problem and may further have impact on the climate system. Though a lot of control policy (sulfur emission have been decreasing from 2007) have been conducted in the region, studies showed the sulfate in fine particles still take major fraction as the nitrate from nitrogen oxides increased significantly. In this study, the role of inorganic chemical compositions in fine particles was investigated with two years in-situ observation. Sulfate and Nitrate contribute to fine particle mass equally in general, but sulfate contributes more during summer and nitrate played more important role in winter. Using lagrangian dispersion backward modeling and source contribution clustering method, the impact of airmass coming from different source region (industrial, dust, biogenic emissions, etc) on fine particle inorganic compositions were discussed. Furthermore, we found two unique cases showing in-situ implications for sulfate formation by nitrogen dioxide oxidation mechanisms. It was showed that the mixing of anthropogenic pollutants with long-range transported mineral dust and biomass burning plume would enhance the sulfate formation by different chemistry mechanisms. This study focus on the complex aspects of fine particle formation in airmasses from different source regions: . It highlights the effect of NOx in enhancing the atmospheric oxidization capacity and indicates a potentially very important impact of increasing NOx on air pollution formation and regional climate change in East Asia.
The effects of air pollution on the health of children.
Buka, Irena; Koranteng, Samuel; Osornio-Vargas, Alvaro R
2006-10-01
The present article is intended to inform paediatricians about the associations between ambient air pollution and adverse health outcomes in children within the context of current epidemiological evidence.The majority of the current literature pertains to adverse respiratory health outcomes, including asthma, other respiratory symptoms, and deficits in lung function and growth, as well as exposure to ambient levels of criteria air pollutants. In addition to the above, the present article highlights mortality, pregnancy outcomes, vitamin D deficiency and alteration in the immune system of children.Some of the data on the impact of improved air quality on children's health are provided, including the reduction of air pollution in former East Germany following the reunification of Germany, as well as the reduction in the rates of childhood asthma events during the 1996 Summer Olympics in Atlanta, Georgia, due to a reduction in local motor vehicle traffic. However, there are many other toxic air pollutants that are regularly released into the air. These pollutants, which are not regularly monitored and have not been adequately researched, are also potentially harmful to children.Significant morbidity and mortality is attributed to ambient air pollution, resulting in a significant economic cost to society. As Canada's cities grow, air pollution issues need to be a priority in order to protect the health of children and support sustainable development for future generations.
Fate, behaviour and weathering of priority HNS in the marine environment: An online tool.
Cunha, Isabel; Oliveira, Helena; Neuparth, Teresa; Torres, Tiago; Santos, Miguel Machado
2016-10-15
Literature data and data obtained with modelling tools were compiled to derive the physicochemical behaviour of 24 priority Hazardous and Noxious Substances (HNS), as a proxy to improve environmental, public health and political issues in relation to HNS spills. Parameters that rule the HNS behaviour in water and those that determine their distribution and persistence in the environment, such as fugacity, physicochemical degradation, biodegradation, bioaccumulation/biotransformation and aquatic toxicity, were selected. Data systematized and produced in the frame of the Arcopol Platform project was made available through a public database (http://www.ciimar.up.pt/hns/substances.php). This tool is expected to assist stakeholders involved in HNS spills preparedness and response, policy makers and legislators, as well as to contribute to a current picture of the scientific knowledge on the fate, behaviour, weathering and toxicity of priority HNS, being essential to support future improvements in maritime safety and coastal pollution response before, during and after spill incidents. Copyright © 2016 Elsevier Ltd. All rights reserved.
An overview of the bioremediation of inorganic contaminants
International Nuclear Information System (INIS)
Bolton, H. Jr.; Gorby, Y.A.
1995-01-01
Bioremediation, or the biological treatment of wastes, usually is associated with the remediation of organic contaminants. Similarly, there is an increasing body of literature and expertise in applying biological systems to assist in the bioremediation of soils, sediments, and water contaminated with inorganic compounds including metals, radionuclides, nitrates, and cyanides. Inorganic compounds can be toxic both to humans and to organisms used to remediate these contaminants. However, in contrast to organic contaminants, most inorganic contaminants cannot be degraded, but must be remediated by altering their transport properties. Immobilization, mobilization, or transformation of inorganic contaminants via bioaccumulation, biosorption, oxidation, reduction, methylation, demethylation, metal-organic complexation, ligand degradation, and phytoremediation are the various processes applied in the bioremediation of inorganic compounds. This paper briefly describes these processes, referring to other contributors in this book as examples when possible, and summarize the factors that must be considered when choosing bioremediation as a cleanup technology for inorganics. Understanding the current state of knowledge as well as the limitations for bioremediation of inorganic compounds will assist in identifying and implementing successful remediation strategies at sites containing inorganic contaminants. 79 refs
Institute of Scientific and Technical Information of China (English)
张栋; 刘兴元; 赵红挺
2016-01-01
Summary Biochar is a carbon-rich product obtained from thermal treatment and pyrolysis of various plant-and animal-based biomass.The biomass for preparation of biochar had extensive sources,and the treatment is usually easy-operation,mainly thermochemical decomposition under a poor-oxygen condition.Biochar has been considered as a low-cost and high-efficiency sorbent for both organic and inorganic contaminants including heavy metals, radioactive elements,nitrogen and phosphate,due to its abundant O-containing functional groups and surface charges,advanced micro-and macro-pore structures,and rich carbon content. In this paper,recent research progress on biochar with regards to its mechanisms and potential applications in remediation of inorganic contaminated soils was reviewed.The key parameters controlling biochar”s properties include pyrolysis temperatures and feedstock types,resulting in biochar with great difference in surface areas,pore size distribution,pH,H/C ratio,ion-exchange capacity,and carbon content.Therefore,the sorption mechanisms of inorganic pollutants varied with different properties of biochar.The sorption mechanisms of inorganic pollutants such as heavy metal,radioactive elements,nitrogen and phosphate were summarized as well as their potential applications in real soil condition.Several different possible mechanisms were proposed:1) electrostatic outer-sphere complexation due to surface cationic exchange;2) surface complexation with active O-containing functional groups such as carboxyl and hydroxyl groups;3) electrostatic attraction of anionic inorganic pollutants such as phosphate and arsenic to protonated groups under alkaline pH;4) co-precipitation of heavy metal and phosphate with organic matter and mineral oxides on surface of the biochar or pre-sorbed metal ions;5) specific binding of iodide with aromatic carbon in biochar;6) to donate electrons for mitigating/reducing heavy metal such as chromium;7) physical adsorption of heavy metals
Salicylate-spectrophotometric determination of inorganic monochloramine
International Nuclear Information System (INIS)
Tao Hui; Chen Zhonglin; Li Xing; Yang Yanling; Li Guibai
2008-01-01
On the basis of classical Berthelot reaction, a simple salicylate-spectrophotometric method was developed for quantitative determination of inorganic monochloramine in water samples. With the catalysis of disodium pentacyanonitrosylferrate(III), inorganic monochloramine reacts with salicylate in equimolar to produce indophenol compound which has an intense absorption at 703 nm. Parameters that influence method performance, such as pH, dosage of salicylate and nitroprussiate and reaction time, were modified to enhance the method performance. By using this method, inorganic monochloramine can be distinguished from organic chloramines and other inorganic chlorine species, such as free chlorine, dichloramine, and trichloramine. The molar absorptivities of the final products formed by these compounds are below ±3% of inorganic monochloramine, because of the α-N in them have only one exchangeable hydrogen atom, and cannot react with salicylate to produce the indophenol compound. The upper concentrations of typical ions that do not interfere with the inorganic monochloramine determination are also tested to be much higher than that mostly encountered in actual water treatment. Case study demonstrates that the results obtained from this method are lower than DPD-titrimetric method because the organic chloramines formed by chlorination of organic nitrogenous compounds give no response in the newly established method. And the result measured by salicylate-spectrophotometric method is coincident with theoretical calculation
Modern Trends in Inorganic Chemistry
Indian Academy of Sciences (India)
Administrator
The series of symposia on 'Modern Trends in Inorganic Chemistry' (MTIC), which began in 1985 at the Indian Association for Cultivation of Science, Calcutta has evolved into a forum for the Inorganic Chemistry fraternity of the country to meet every two years and discuss the current status and future projections of research in.
Raker, Jeffrey R.; Reisner, Barbara A.; Smith, Sheila R.; Stewart, Joanne L.; Crane, Johanna L.; Pesterfield, Les; Sobel, Sabrina G.
2015-01-01
A national survey of inorganic chemists explored the self-reported topics covered in foundation-level courses in inorganic chemistry at the postsecondary level; the American Chemical Society's Committee on Professional Training defines a foundation course as one at the conclusion of which, "a student should have mastered the vocabulary,…
Noreña-Barroso, E; Gold-Bouchot, G; Ceja-Moreno, V
2007-08-01
Bay of Chetumal is a transboundary priority area for the Mesoamerican Barrier Reef Systems project, which has been studied because it is the receiving body of pollutants from a large agricultural area and the city of Chetumal. Levels of persistent organic pollutants in sediments from the Bay were assessed a few years after a mass mortality event of Mayan catfish (Ariopsis assimilis) occurred in 1996. Recent sediments were collected in the rainy season (1999) and dry season (2000); results show concentrations in general lower than those reported after the fish kill, and a change of chemical profiles in chemical pollution.
Healthcare priority setting in Kenya
DEFF Research Database (Denmark)
Bukachi, Salome A.; Onyango-Ouma, Washington; Siso, Jared Maaka
2014-01-01
In resource-poor settings, the accountability for reasonableness (A4R) has been identified as an important advance in priority setting that helps to operationalize fair priority setting in specific contexts. The four conditions of A4R are backed by theory, not evidence, that conformance with them...... improves the priority setting decisions. This paper describes the healthcare priority setting processes in Malindi district, Kenya, prior to the implementation of A4R in 2008 and evaluates the process for its conformance with the conditions for A4R. In-depth interviews and focus group discussions with key...... players in the Malindi district health system and a review of key policy documents and national guidelines show that the priority setting process in the district relies heavily on guidelines from the national level, making it more of a vertical, top-down orientation. Multilateral and donor agencies...
Development of cement material using inorganic additives
International Nuclear Information System (INIS)
Toyohara, Masumitsu; Satou, Tatsuaki; Wada, Mikio; Ishii, Tomoharu; Matsuo, Kazuaki.
1997-01-01
Inorganic admixtures to enhance the fluidity of cement material was developed. These admixtures turned into easy to immobilize the miscellaneous radioactive waste using cement material. It was found that the ζ potential of cement particles was directly proportional to the content of the inorganic admixtures in cement paste and the particles of cement were dispersed at the high ζ potential. The condensed sodium phosphate, which was the main component of the inorganic admixtures, retarded the dissolution of Ca 2+ ion from the cement, and generated the colloids by incorporating dissolved Ca 2+ ion. The cement material containing the inorganic admixtures was found to have the same mechanical strength and adsorption potential of radionuclides in comparison to normal cement materials. It was confirmed that the cement material containing the inorganic admixture was effectively filled gaps of miscellaneous radioactive waste. (author)
Air pollution control systems in WtE units: An overview
Energy Technology Data Exchange (ETDEWEB)
Vehlow, J., E-mail: juergen.vehlow@partner.kit.edu
2015-03-15
Highlights: • The paper describes in brief terms the development of gas cleaning in waste incineration. • The main technologies for pollutant removal are described including their basic mechanisms. • Their respective efficiencies and their application are discussed. • A cautious outlook regarding future developments is made. - Abstract: All WtE (waste-to-energy) plants, based on combustion or other thermal processes, need an efficient gas cleaning for compliance with legislative air emission standards. The development of gas cleaning technologies started along with environment protection regulations in the late 1960s. Modern APC (air pollution control) systems comprise multiple stages for the removal of fly ashes, inorganic and organic gases, heavy metals, and dioxins from the flue gas. The main technologies and devices used for abatement of the various pollutants are described and their basic principles, their peculiarities, and their application are discussed. Few systems for cleaning of synthesis gas from waste gasification plants are included. Examples of APC designs in full scale plants are shown and cautious prospects for the future development of APC systems are made.
Air pollution control systems in WtE units: An overview
International Nuclear Information System (INIS)
Vehlow, J.
2015-01-01
Highlights: • The paper describes in brief terms the development of gas cleaning in waste incineration. • The main technologies for pollutant removal are described including their basic mechanisms. • Their respective efficiencies and their application are discussed. • A cautious outlook regarding future developments is made. - Abstract: All WtE (waste-to-energy) plants, based on combustion or other thermal processes, need an efficient gas cleaning for compliance with legislative air emission standards. The development of gas cleaning technologies started along with environment protection regulations in the late 1960s. Modern APC (air pollution control) systems comprise multiple stages for the removal of fly ashes, inorganic and organic gases, heavy metals, and dioxins from the flue gas. The main technologies and devices used for abatement of the various pollutants are described and their basic principles, their peculiarities, and their application are discussed. Few systems for cleaning of synthesis gas from waste gasification plants are included. Examples of APC designs in full scale plants are shown and cautious prospects for the future development of APC systems are made
INFLUENCE OF AGRICULTURAL POLLUTANTS ON THE GREENHOUSE EFFECT
Directory of Open Access Journals (Sweden)
B. LIXANDRU
2007-05-01
Full Text Available The general heating of our planet has become a proved fact today, and its consequences are observed in more climatic disturbances which affect almost the whole Earth. At the base of this climatic process there is the excessive development of the greenhouse effect. The greenhouse effect is a natural physical phenomenon which has gradually developed with the geophysical and biological evolution of the Earth, and its consequence is the thermical constancy of +150C as medium global temperature. The main physical factories which contribute at the realization of greenhouse effect are CO2, watery vapors, NOx and CH4. Naturally, the greenhouse gases have the perfectly global self-regulation cycles. This capacity of self-regulation seems to be troubled by the huge amounts of polluted gaseous thrown in the air by different and usual human activities. In this sense, the agriculture has an important role and the main pollution sources are the rice plantations, inorganic fertilizations and animal farms.
Politicians’ priorities and the determinants of priorities in the Swedish social services
Directory of Open Access Journals (Sweden)
Marie Wörlén
2012-04-01
Full Text Available The setting of priorities is an integrated part of social-work politics in Sweden as well as internationally. This article explores Swedish social services and how politicians on the political boards wish to make priorities and what these priorities involve. The use of regression analyses also reveals which circumstances are of importance for allocative precedence and the impact different distributive principles have. It is hard to detect clear-cut patterns of circumstances that guide the judgements in any one direction. The results show that political affiliation overall is not a determining factor for attitudes towards how priorities are made. Another result is a manifest area bias, suggesting that respondents tend to see to the interests of their own professional domain, a result most visible among the politicians involved with Care for the Elderly and Disabled (CED. Yet, with regard to allocative principles, political colour seems to matter. Conservative politicians, as expected, agree with the principles of economy and of capacity to benefit, while the socialist block, less expectedly, seems to embrace the principle of deservingness.
Inorganic tin and organotin interactions with candida maltosa
Energy Technology Data Exchange (ETDEWEB)
White, J.S.; Tobin, J.M. [School of Biotechnology, Dublin City Univ., Dublin (Ireland)
2004-07-01
As a consequence of the widespread industrial and agricultural applications of organotins, contamination of various ecosystems has occurred in recent decades. Understanding how these compounds interact with microorganisms is important in assessing the risks of organotin pollution. The organotins, tributyltin (TBT), trimethyltin (TMT) and inorganic tin, Sn(IV), were investigated for their physical interactions with non-metabolising cells and protoplasts of the yeast candida maltosa, an organism that is often associated with contaminated environments. Uptake, toxicity and membrane-acting effects of these compounds, at concentrations approximating those found in polluted environments, were assessed. Sn(IV) and TBT uptake occurred by different mechanisms. Uptake of Sn(IV) was 2-fold greater in intact cells than protoplasts, underlining the importance of cell wall binding, whereas TBT uptake levels by both cell types were similar. TBT uptake resulted in cell death and extensive K{sup +} leakage, while Sn(IV) uptake had no effect. TMT did not interact with cells. Of the three compounds, TBT alone altered membrane fluidity, as measured by the fluorescence anisotropy of 1,6-diphenyl-1,3,5-hexatriene incorporated into cells. Anisotropy of 1-(4-trimethylaminophenyl-6-phenyl-1,3,5-hexatriene) was not affected, implying that TBT is not confined to the surface of the cytoplasmic membrane, but acts within membrane lipids. These results indicate that the cell wall is the dominant site of Sn(IV) interactions with yeast, while lipophilic interactions play an important role in uptake and toxicity of TBT. (orig.)
Inorganic biomaterials structure, properties and applications
Zhang, Xiang C
2014-01-01
This book provides a practical guide to the use and applications of inorganic biomaterials. It begins by introducing the concept of inorganic biomaterials, which includes bioceramics and bioglass. This concept is further extended to hybrid biomaterials consisting of inorganic and organic materials to mimic natural biomaterials. The book goes on to provide the reader with information on biocompatibility, bioactivity and bioresorbability. The concept of the latter is important because of the increasing role resorbable biomaterials are playing in implant applications. The book also introduces a n
Soja, Gerhard; Marsz, Aleksandra; Fristak, Vladimir
2015-04-01
Biochar is the pyrolysis product of biomass, preferably from agricultural and forestry residues and waste materials. Characterized by a polyaromatic structure rich in carbon, it offers a microporous structure with a high specific surface area and active functional groups as binding sites. Because of the high sorption capacity for organic and inorganic soil pollutants biochar is an interesting tool for in-situ soil remediation. Especially if the reduction of contaminant bioavailability and the protection of groundwater from pollutants in the vadose zone are the most relevant issues for remediating a polluted site without excavation and removal of the soil, an in-situ application of biochar may offer a promising remediation strategy. The resulting interest of deploying biochar as sorbent for soil contaminants has stimulated a wealth of studies to develop successful applications for environmental technology. However, the existing studies do not always agree on the efficacy for different pollutants and on the most relevant char and soil characteristics that determine the rate of success when using biochar as sorbent. This makes it necessary to apply advanced literature assessment techniques to allow for the recognition of the extent and the significance of the efficacy of a given pollutant treatment technique. A meta-analysis is a study assessment technique that allows extracting a harmonized answer to a specific research question that has been studied more often than one time, even if the results are partially conflicting. Such a technique also allows getting an overview about the degree of consensus or contradiction in the answers to the question if biochar can be applied successfully for immobilizing certain soil contaminants. The meta-analysis results can also be used to quantify the average extent of effects of a certain treatment, depending on the characteristics of the sorbent and on the application rate. By checking 104 published papers in the peer
Inorganic nanomedicine--part 1.
Sekhon, Bhupinder S; Kamboj, Seema R
2010-08-01
Inorganic nanomedicine refers to the use of inorganic or hybrid nanomaterials and nanosized objects to achieve innovative medical breakthroughs for drug and gene discovery and delivery, discovery of biomarkers, and molecular diagnostics. Potential uses for fluorescent quantum dots include cell labeling, biosensing, in vivo imaging, bimodal magnetic-luminescent imaging, and diagnostics. Biocompatible quantum dot conjugates have been used successfully for sentinel lymph node mapping, tumor targeting, tumor angiogenesis imaging, and metastatic cell tracking. Magnetic nanowires applications include biosensing and construction of nucleic acids sensors. Magnetic cell therapy is used for the repair of blood vessels. Magnetic nanoparticles (MNPs) are important for magnetic resonance imaging, drug delivery, cell labeling, and tracking. Superparamagnetic iron oxide nanoparticles are used for hyperthermic treatment of tumors. Multifunctional MNPs applications include drug and gene delivery, medical imaging, and targeted drug delivery. MNPs could have a vital role in developing techniques to simultaneously diagnose, monitor, and treat a wide range of common diseases and injuries. From the clinical editor: This review serves as an update about the current state of inorganic nanomedicine. The use of inorganic/hybrid nanomaterials and nanosized objects has already resulted in innovative medical breakthroughs for drug/gene discovery and delivery, discovery of biomarkers and molecular diagnostics, and is likely to remain one of the most prolific fields of nanomedicine. 2010 Elsevier Inc. All rights reserved.
Enrichment of Inorganic Martian Dust Simulant with Carbon Component can Provoke Neurotoxicity
Pozdnyakova, Natalia; Pastukhov, Artem; Dudarenko, Marina; Borysov, Arsenii; Krisanova, Natalia; Nazarova, Anastasia; Borisova, Tatiana
2017-02-01
Carbon is the most abundant dust-forming element in the interstellar medium. Tremendous amount of meteorites containing plentiful carbon and carbon-enriched dust particles have reached the Earth daily. National Institute of Health panel accumulates evidences that nano-sized air pollution components may have a significant impact on the central nervous system (CNS) in health and disease. During inhalation, nano-/microsized particles are efficiently deposited in nasal, tracheobronchial, and alveolar regions and can be transported to the CNS. Based on above facts, here we present the study, the aims of which were: 1) to upgrade inorganic Martian dust simulant derived from volcanic ash (JSC-1a/JSC, ORBITEC Orbital Technologies Corporation, Madison, Wisconsin) by the addition of carbon components, that is, nanodiamonds and carbon dots; 2) to analyse acute effects of upgraded simulant on key characteristics of synaptic neurotransmission; and 3) to compare above effects with those of inorganic dust and carbon components per se. Acute administration of carbon-containing Martian dust analogues resulted in a significant decrease in transporter-mediated uptake of L-[14C]glutamate (the major excitatory neurotransmitter) and [3H]GABA (the main inhibitory neurotransmitter) by isolated rat brain nerve terminals. The extracellular level of both neurotransmitters increased in the presence of carbon-containing Martian dust analogues. These effects were associated with action of carbon components of upgraded Martian dust simulant, but not with its inorganic constituent. This fact indicates that carbon component of native Martian dust can have deleterious effects on extracellular glutamate and GABA homeostasis in the CNS, and so glutamate- and GABA-ergic neurotransmission disballansing exitation and inhibition.
Inorganic nanostructure-organic polymer heterostructures useful for thermoelectric devices
Energy Technology Data Exchange (ETDEWEB)
See, Kevin C.; Urban, Jeffrey J.; Segalman, Rachel A.; Coates, Nelson E.; Yee, Shannon K.
2017-11-28
The present invention provides for an inorganic nanostructure-organic polymer heterostructure, useful as a thermoelectric composite material, comprising (a) an inorganic nanostructure, and (b) an electrically conductive organic polymer disposed on the inorganic nanostructure. Both the inorganic nanostructure and the electrically conductive organic polymer are solution-processable.
Neiger, Brad L; Thackeray, Rosemary; Fagen, Michael C
2011-03-01
Priority setting is an important component of systematic planning in health promotion and also factors into the development of a comprehensive evaluation plan. The basic priority rating (BPR) model was introduced more than 50 years ago and includes criteria that should be considered in any priority setting approach (i.e., use of predetermined criteria, standardized comparisons, and a rubric that controls bias). Although the BPR model has provided basic direction in priority setting, it does not represent the broad array of data currently available to decision makers. Elements in the model also give more weight to the impact of communicable diseases compared with chronic diseases. For these reasons, several modifications are recommended to improve the BPR model and to better assist health promotion practitioners in the priority setting process. The authors also suggest a new name, BPR 2.0, to represent this revised model.
International Nuclear Information System (INIS)
Estevez, Esmeralda; Cabrera, María del Carmen; Fernández-Vera, Juan Ramón; Molina-Díaz, Antonio; Robles-Molina, José; Palacios-Díaz, María del Pino
2016-01-01
Irrigation with reclaimed water (R) is necessary to guarantee the sustainability of semi-arid areas. Results obtained during a two years monitoring network (2009–2011) in Gran Canaria are presented, including the analysis of chemical parameters, N and S isotopes, priority substances (2008/105/EC, 2013/39/EU), other organic contaminants and heavy metals in groundwater and R used to irrigate a golf course. The aims of this work are to evaluate the contamination in a volcanic aquifer, relate the presence of organic contaminants and heavy metals with the hydrogeochemistry and identify pollution sources in the area. No priority substance exceeded the EU thresholds for surface water, although seventeen were detected in R. The most frequent compounds were hexachlorobenzene, chlorpyrifos ethyl, fluorene, phenanthrene and pyrene. These compounds were detected at low concentration, except chlorpyrifos. Chlorpyrifos ethyl, terbuthylazine, diuron, terbutryn, procymidone, atrazine and propazine exceeded the European threshold concentration for pesticides in groundwater (100 ng L"−"1). Therefore, the priority substances chlorpyrifos ethyl and diuron must be included in monitoring studies. The priority pesticides chlorfenvinphos and diazinon were always detected in R but rarely in groundwater. Besides, the existence of contaminants not related to the current R irrigation has been identified. Absence of environmental problems related to heavy metals can be expected. The relationship among contaminant presence, hydrogeochemistry, including the stable isotopic prints of δ"1"8O, δ"1"5N and δ"3"4S and preferential recharge paths has been described. The coastal well shows high values of EC, nitrate, a variable chemistry, and 50% of organic contaminants detected above 100 ng L"−"1. The well located in the recharge area presents a stable hydrochemistry, the lowest value of δ"1"5N and the lowest contaminants occurrence. The area is an example of a complex volcanic media with
Energy Technology Data Exchange (ETDEWEB)
Estevez, Esmeralda, E-mail: eestevez@proyinves.ulpgc.es [Dpt. Física (GEOVOL), Universidad de Las Palmas de Gran Canaria, 35017 Las Palmas de Gran Canaria, Canary Islands (Spain); Agrifood and Phytopathological Laboratory (Cabildo de Gran Canaria), 35413 Arucas, Canary Islands (Spain); Cabrera, María del Carmen, E-mail: mcarmen.cabrera@ulpgc.es [Dpt. Física (GEOVOL), Universidad de Las Palmas de Gran Canaria, 35017 Las Palmas de Gran Canaria, Canary Islands (Spain); IMDEA Water Institute, Alcalá de Henares, Madrid (Spain); Fernández-Vera, Juan Ramón, E-mail: jrfernandezv@grancanaria.com [Agrifood and Phytopathological Laboratory (Cabildo de Gran Canaria), 35413 Arucas, Canary Islands (Spain); Molina-Díaz, Antonio, E-mail: amolina@ujaen.es [Analytical Chemistry Research Group, Department of Physical and Analytical Chemistry, University of Jaen, 23071 Jaen (Spain); Robles-Molina, José, E-mail: jroblesmol@gmail.com [Analytical Chemistry Research Group, Department of Physical and Analytical Chemistry, University of Jaen, 23071 Jaen (Spain); Palacios-Díaz, María del Pino, E-mail: mp.palaciosdiaz@ulpgc.es [Dpt. de Patología Animal, Producción Animal, Bromatología y Tecnología de los Alimentos (GEOVOL), Universidad de Las Palmas de Gran Canaria, 35413 Arucas, Canary Islands (Spain)
2016-05-01
Irrigation with reclaimed water (R) is necessary to guarantee the sustainability of semi-arid areas. Results obtained during a two years monitoring network (2009–2011) in Gran Canaria are presented, including the analysis of chemical parameters, N and S isotopes, priority substances (2008/105/EC, 2013/39/EU), other organic contaminants and heavy metals in groundwater and R used to irrigate a golf course. The aims of this work are to evaluate the contamination in a volcanic aquifer, relate the presence of organic contaminants and heavy metals with the hydrogeochemistry and identify pollution sources in the area. No priority substance exceeded the EU thresholds for surface water, although seventeen were detected in R. The most frequent compounds were hexachlorobenzene, chlorpyrifos ethyl, fluorene, phenanthrene and pyrene. These compounds were detected at low concentration, except chlorpyrifos. Chlorpyrifos ethyl, terbuthylazine, diuron, terbutryn, procymidone, atrazine and propazine exceeded the European threshold concentration for pesticides in groundwater (100 ng L{sup −1}). Therefore, the priority substances chlorpyrifos ethyl and diuron must be included in monitoring studies. The priority pesticides chlorfenvinphos and diazinon were always detected in R but rarely in groundwater. Besides, the existence of contaminants not related to the current R irrigation has been identified. Absence of environmental problems related to heavy metals can be expected. The relationship among contaminant presence, hydrogeochemistry, including the stable isotopic prints of δ{sup 18}O, δ{sup 15}N and δ{sup 34}S and preferential recharge paths has been described. The coastal well shows high values of EC, nitrate, a variable chemistry, and 50% of organic contaminants detected above 100 ng L{sup −1}. The well located in the recharge area presents a stable hydrochemistry, the lowest value of δ{sup 15}N and the lowest contaminants occurrence. The area is an example of a complex
Inorganic nanolayers: structure, preparation, and biomedical applications.
Saifullah, Bullo; Hussein, Mohd Zobir B
2015-01-01
Hydrotalcite-like compounds are two-dimensional inorganic nanolayers also known as clay minerals or anionic clays or layered double hydroxides/layered hydroxy salts, and have emerged as a single type of material with numerous biomedical applications, such as drug delivery, gene delivery, cosmetics, and biosensing. Inorganic nanolayers are promising materials due to their fascinating properties, such as ease of preparation, ability to intercalate different type of anions (inorganic, organic, biomolecules, and even genes), high thermal stability, delivery of intercalated anions in a sustained manner, high biocompatibility, and easy biodegradation. Inorganic nanolayers have been the focus for researchers over the last decade, resulting in widening application horizons, especially in the field of biomedical science. These nanolayers have been widely applied in drug and gene delivery. They have also been applied in biosensing technology, and most recently in bioimaging science. The suitability of inorganic nanolayers for application in drug delivery, gene delivery, biosensing technology, and bioimaging science makes them ideal materials to be applied for theranostic purposes. In this paper, we review the structure, methods of preparation, and latest advances made by inorganic nanolayers in such biomedical applications as drug delivery, gene delivery, biosensing, and bioimaging.
Comprehensive assessment of toxic chemical pollutants at Trombay region
International Nuclear Information System (INIS)
Sahu, S.K.; Saradhi, I.V.; Raghunath, R.; Pandit, G.G.; Puranik, V.D.
2006-04-01
Anthropogenic activities like industrial production and transportation, a wide range of chemical pollutants such as trace and toxic metals, pesticides, polycyclic aromatic hydrocarbons etc. eventually found their way into various environmental compartments. These pollutants get distributed among soil, water bodies, air and if left unattended can cause serious health risk to all exposed ecosystem components including human beings. These compounds may produce immediate toxicity to ecosystems or exhibit long term effects such as mutagenicity, carcinogenicity or biomagnify (concentrations of pollutant increase per unit body weight) in higher trophic organism of the food chain. Thus regular monitoring of these toxic chemicals in all the environmental matrices is unquestionably essential for reclaiming our natural resources. This report describes some of the activities of Environmental Assessment Division which are having direct relevance to the public health and regulatory bodies. Extensive studies were carried out in our laboratories for the Trombay site, over the years; on the organic as well as inorganic pollution in the environment to understand inter compartmental behaviour of these chemical pollutants. In this report attempt has been made to compare the data on various toxic chemical pollutants that are being monitored regularly at Trombay site and their levels are compared with existing regulations. For monitoring, methodologies have been standardized for characterization of toxic chemical pollutants using different analytical techniques. Regular sample collection from different environmental matrices has been done. Sample analysis has been carried out using different analytical instruments such as high performance liquid chromatograph, ion chromatograph, gas chromatograph, atomic absorption spectrophotometer, and differential pulse anodic stripping voltammetry. Major portion of the study covers Air quality monitoring of toxic chemical pollutants, as the other
Priority for sustainability. Final report
International Nuclear Information System (INIS)
2007-12-01
The Dutch Minister of Economic Affairs (EZ) has been asked to realize priority in connection to the grid for sustainable production capacity. Currently there are waiting lists for connection of new production capacity to the grid in some areas, due to a shortage in transport capacity. The Dutch connection policy (first come, first serve) may possibly lead to delays in connecting sustainable production capacity, which is not desirable in view of the incentivisation of sustainability. EZ and TenneT have asked Booz Allen to examine the options for giving priority to sustainability (wind and CHP). Priority in connection applies only to new sustainable production capacity, but priority in transport also applies to existing sustainable production capacity. [mk] [nl
Review of progress in soil inorganic carbon research
Bai, S. G.; Jiao, Y.; Yang, W. Z.; Gu, P.; Yang, J.; Liu, L. J.
2017-12-01
Soil inorganic carbon is one of the main carbon banks in the near-surface environment, and is the main form of soil carbon library in arid and semi-arid regions, which plays an important role in the global carbon cycle. This paper mainly focuses on the inorganic dynamic process of soil inorganic carbon in soil environment in arid and semi-arid regions, and summarized the composition and source of soil inorganic carbon, influence factors and soil carbon sequestration.
Priority Queues Resilient to Memory Faults
DEFF Research Database (Denmark)
Jørgensen, Allan Grønlund; Moruz, Gabriel; Mølhave, Thomas
2007-01-01
In the faulty-memory RAM model, the content of memory cells can get corrupted at any time during the execution of an algorithm, and a constant number of uncorruptible registers are available. A resilient data structure in this model works correctly on the set of uncorrupted values. In this paper we...... introduce a resilient priority queue. The deletemin operation of a resilient priority queue returns either the minimum uncorrupted element or some corrupted element. Our resilient priority queue uses $O(n)$ space to store $n$ elements. Both insert and deletemin operations are performed in $O(\\log n......+\\delta)$ time amortized, where $\\delta$ is the maximum amount of corruptions tolerated. Our priority queue matches the performance of classical optimal priority queues in the RAM model when the number of corruptions tolerated is $O(\\log n)$. We prove matching worst case lower bounds for resilient priority...
Hybrid organic-inorganic rotaxanes and molecular shuttles.
Lee, Chin-Fa; Leigh, David A; Pritchard, Robin G; Schultz, David; Teat, Simon J; Timco, Grigore A; Winpenny, Richard E P
2009-03-19
The tetravalency of carbon and its ability to form covalent bonds with itself and other elements enables large organic molecules with complex structures, functions and dynamics to be constructed. The varied electronic configurations and bonding patterns of inorganic elements, on the other hand, can impart diverse electronic, magnetic, catalytic and other useful properties to molecular-level structures. Some hybrid organic-inorganic materials that combine features of both chemistries have been developed, most notably metal-organic frameworks, dense and extended organic-inorganic frameworks and coordination polymers. Metal ions have also been incorporated into molecules that contain interlocked subunits, such as rotaxanes and catenanes, and structures in which many inorganic clusters encircle polymer chains have been described. Here we report the synthesis of a series of discrete rotaxane molecules in which inorganic and organic structural units are linked together mechanically at the molecular level. Structural units (dialkyammonium groups) in dumb-bell-shaped organic molecules template the assembly of essentially inorganic 'rings' about 'axles' to form rotaxanes consisting of various numbers of rings and axles. One of the rotaxanes behaves as a 'molecular shuttle': the ring moves between two binding sites on the axle in a large-amplitude motion typical of some synthetic molecular machine systems. The architecture of the rotaxanes ensures that the electronic, magnetic and paramagnetic characteristics of the inorganic rings-properties that could make them suitable as qubits for quantum computers-can influence, and potentially be influenced by, the organic portion of the molecule.
49 CFR 260.7 - Priority consideration.
2010-10-01
... 49 Transportation 4 2010-10-01 2010-10-01 false Priority consideration. 260.7 Section 260.7... REHABILITATION AND IMPROVEMENT FINANCING PROGRAM Overview § 260.7 Priority consideration. When evaluating applications, the Administrator will give priority consideration (but not necessarily in the following order...
Directory of Open Access Journals (Sweden)
Majid Kermani
2016-04-01
Conclusion: Air pollution in Tehran increases the load of emergency visits to hospitals and increases the risk of respiratory and heart diseases. Therefore, measures to reduce and control air pollution and to prepare, equip, and mobilize hospitals, particularly emergency wards, are among important priorities that should be pursued seriously by the authorities.
2014-07-09
The Assistant Secretary for Special Education and Rehabilitative Services announces a priority under the Disability and Rehabilitation Research Projects and Centers Program administered by the National Institute on Disability and Rehabilitation Research (NIDRR). Specifically, we announce a priority for a Rehabilitation Engineering Research Center (RERC) on Improving the Accessibility, Usability, and Performance of Technology for Individuals who are Deaf or Hard of Hearing. The Assistant Secretary may use this priority for competitions in fiscal year (FY) 2014 and later years. We take this action to focus research attention on an area of national need. We intend the priority to contribute to improving the accessibility, usability, and performance of technology for individuals who are deaf or hard of hearing.
Cost-effective and simple solutions for environmental pollution problems by electrochemical methods
International Nuclear Information System (INIS)
Ahmed, R.
1997-01-01
Environmental pollution is a worldwide problem and has increased significantly with industrialization, urbanization and population growth and is effecting quality of our air, land and water resources. Pollutants include heavy metals, organic toxic and reactive compounds and toxic gases. Major problems in environmental pollution are monitoring and remediation. Now pollutants include such wide range of elements, compounds and gases and normally one needs a whole range of costly analytical techniques to analyse all the pollutants which only very few institutes can afford to purchased. Equipment for electro analytical techniques are much cheaper than most of the other analytical techniques and are also sensitive and accurate for the analysis of nearly the whole range of pollutants including heavy metal. organic reactive compounds, inorganic elements and compounds and toxic gases. application of electrochemical methods for the analysis of different pollutants are reviewed. after monitoring, remediation in the most important aspect of environmental pollution control. Best way could be to treat the pollutants from different industries in such a way that either these are removed from the waste or converted in to non-toxic compounds before their release into the environment. Among all the other treatment methods, electrochemical methods of utilizing the electron as a clean chemical regent are very attractive. Electrodes in electrochemical reactors are abundantly use for the removal and recycling of toxic metals like Cd, Cu, Ni, Pb, Cr and Zn from the industrial waste after electrodeposition. Electrochemical reactors are also being used for electro oxidation of cyanides and other toxic organic compounds into non-toxic species. Such reactors can, in principal, be applied to any environmental pollution problem where the pollutant can either be electro-reduced or oxidized. Different types of electrochemical reactors are discussed, with a view, of their envisaged used for
Quantitative method for determination of body inorganic iodine
International Nuclear Information System (INIS)
Filatov, A.A.; Tatsievskij, V.A.
1991-01-01
An original method of quantitation of body inorganic iodine, based upon a simultaneous administration of a known dose of stable and radioactive iodine with subsequent radiometry of the thyroid was proposed. The calculation is based upon the principle of the dilution of radiactive iodine in human inorganic iodine space. The method permits quantitation of the amount of inorganic iodine with regard to individual features of inorganic space. The method is characterized by simplicity and is not invasive for a patient
Observing environmental European legislation - strategic priority of SC Termoelectrica
International Nuclear Information System (INIS)
Pop, Ovidiu; Motiu, Cornel
2004-01-01
Defined as the main Romanian power producer, SC Termoelectrica is also a Company that faced over 50 years of experience and confrontations with different technical, economical and legislative problems. The measures of restructuring that were taken during the last years, also included a program of retiring of use of some inefficient and in excess units. That brought our company at its actual structure that consists in producing, repairs and services units, organized as commercial societies and subsidiaries of SC Termoelectrica. The activity of producing thermal and electric power using old power equipment (33.84% of them are over 30 years old, 46.54% are between 10-20 years old and only 0.64 % are under 10 years old) and without control pollution installations or having inefficient installations, led to the increasing of some environmental problems along the years. The paper has the following structure: - Introduction; - Actual situation; - The accession to the European Union - the control of industrial pollution (The abatement of atmospheric, water and soil pollution); - The mitigation of greenhouse gases. In conclusion one stresses that no matter which will be the way of organization the environmental approach at European or national level, these will become a strategic priority for SC Termoelectrica. The way these environmental problems will be solved will have a great influence on: - The company's thermal power plants work, while their impact upon the local, regional and global environment will be almost nonexistent; - The offer of electric power produced by thermal power plants in national and international transactions; - The fulfillment of the three objectives of a power producer: accessibility, availability and acceptability
Indicators of Marine Pollution in the North Pacific Ocean.
Brown, Tanya M; Takada, Hideshige
2017-08-01
The complex nature of ocean pollution underscores the utility in identifying and characterizing a limited number of "indicators" that enables scientists and managers to track trends over space and time. This paper introduces a special issue on indicators of marine pollution in the North Pacific Ocean and builds on a scientific session that was held at the North Pacific Marine Science Organization. The special issue highlights studies using a variety of indicators to provide insight into the identification of legacy and emerging contaminants, the ranking of priority pollutants from various sources, and the effects of contaminants on ecosystem health in the North Pacific Ocean. Examples include the use of mussels to illustrate spatial and temporal trends of a number of contaminants following the 2011 tsunami in Japan, the use of molecular marker (linear alkylbenzenes, hopanes, and polycyclic aromatic hydrocarbons) profiles to identify pollution sources, and the use of plastic resin pellets to illustrate spatial trends of petroleum pollution around the world. Stable isotopes were used to strengthen the utility of the Glaucous-winged gull (Larus glaucescens) as an indicator of marine pollution. Examples also demonstrate the development and application of biomarker approaches, including gene transcripts, oxidative stress, estradiol, hatchability, and respiration and swimming behavior abnormalities, as a function of exposure to polychlorinated biphenyls, sulfur-diesel, Pinghu crude oil, galaxolide and antifouling biocides. We provide a brief review of indicators of marine pollution, identify research gaps, and summarize key findings from the articles published within the issue. This special issue represents the first compilation of research pertaining to marine pollution indicators in the North Pacific Ocean and provides guidance to inform mitigation and monitoring efforts of contaminants in the region.
Holographic patterning of organic-inorganic photopolymerizable nanocomposites
Sakhno, Oksana V.; Goldenberg, Leonid M.; Smirnova, Tatiana N.; Stumpe, J.
2009-09-01
We present here novel easily processible organic-inorganic nanocomposites suitable for holographic fabrication of diffraction optical elements (DOE). The nanocomposites are based on photocurable acrylate monomers and inorganic nanoparticles (NP). The compatibility of inorganic NP with monomers was achieved by capping the NP surface with proper organic shells. Surface modification allows to introduce up to 50wt.% of inorganic NP in organic media. Depending on the NP nature (metal oxides, phosphates, semiconductors, noble metals) and their properties, the materials for both efficient DOE and multifunctional elements can be designed. Organic-inorganic composites prepared have been successfully used for the effective inscription of periodic volume refractive index structures using the holographic photopolymerization method. The nanocomposite preparation procedure, their properties and optical performance of holographic gratings are reported. The use of functional NP makes it possible to obtain effective holographic gratings having additional physical properties such as light-emission or NLO. Some examples of such functional polymer-NP structures and their possible application fields are presented. The combination of easy photo-patterning of soft organic compounds with physical properties of inorganic materials in new nanocomposites and the flexibility of the holographic patterning method allow the fabrication of mono- and multifunctional one- and multi-dimensional passive or active optical and photonic elements.
International Nuclear Information System (INIS)
Chadlia, Aguir; Mohamed, Khalfaoui; Najah, Laribi; Farouk, M'henni Mohamed
2009-01-01
The present work describes the preparation of new chelating materials derived from Posidonia for adsorption of heavy metal ions and dye in aqueous solution. The first part of this report deals with the chemical modification of Posidonia with succinic anhydride. Thus, we have obtained materials with various succinyl groups contents (from 29.8 to 39.2%). The obtained materials were characterized by infrared and CP/MAS 13 C-RMN spectroscopy. The rate of succinyl content of the modified Posidonia was determined by saponification. The second part is devoted to the evaluation of the adsorption capacity of metal ions such as Pb 2+ and dye such as direct red 75 (DR75) for raw and modified Posidonia materials. Two possible ways for the adsorption of these pollutants are studied: adsorption of each pollutant alone onto these supports, and cumulative adsorption of both metal ions and dye on the same supports. In the last case, the pollutant is adsorbed successively from two different solutions. The effects of pollutants concentration, support dose, pH, contact time and temperature on adsorption of each pollutant were evaluated. The results showed that the raw and modified Posidonia show a high capacity for Pb 2+ adsorption. The capacity of modified Posidonia saturated with Pb 2+ to adsorb DR75 was found 147.12 mg g -1 . While the adsorption capacity of the nonsaturated modified Posidonia was equal to 81.63 mg g -1 . The pseudo-second-order model was the best to represent adsorption kinetics of DR75. The pseudo-first-order model would be better for fitting the adsorption kinetic process of Pb 2+ onto raw and modified Posidonia. The adsorption isotherms of Pb 2+ could be described by the Jossens equation model. Any of the tested models can describe the adsorption of DR75 onto the studied materials. These results confirm that the adsorption of DR75 from aqueous solution was multilayer.
Energy Technology Data Exchange (ETDEWEB)
Chadlia, Aguir, E-mail: aguirc@yahoo.ca [Unite de Recherche de Chimie Appliquee et Environnement, Faculte des Sciences de Monastir, 5000 (Tunisia); Mohamed, Khalfaoui [Unite de Recherche de Physique Quantique, Faculte des Sciences de Monastir, 5000 (Tunisia); Najah, Laribi; Farouk, M' henni Mohamed [Unite de Recherche de Chimie Appliquee et Environnement, Faculte des Sciences de Monastir, 5000 (Tunisia)
2009-12-30
The present work describes the preparation of new chelating materials derived from Posidonia for adsorption of heavy metal ions and dye in aqueous solution. The first part of this report deals with the chemical modification of Posidonia with succinic anhydride. Thus, we have obtained materials with various succinyl groups contents (from 29.8 to 39.2%). The obtained materials were characterized by infrared and CP/MAS {sup 13}C-RMN spectroscopy. The rate of succinyl content of the modified Posidonia was determined by saponification. The second part is devoted to the evaluation of the adsorption capacity of metal ions such as Pb{sup 2+} and dye such as direct red 75 (DR75) for raw and modified Posidonia materials. Two possible ways for the adsorption of these pollutants are studied: adsorption of each pollutant alone onto these supports, and cumulative adsorption of both metal ions and dye on the same supports. In the last case, the pollutant is adsorbed successively from two different solutions. The effects of pollutants concentration, support dose, pH, contact time and temperature on adsorption of each pollutant were evaluated. The results showed that the raw and modified Posidonia show a high capacity for Pb{sup 2+} adsorption. The capacity of modified Posidonia saturated with Pb{sup 2+} to adsorb DR75 was found 147.12 mg g{sup -1}. While the adsorption capacity of the nonsaturated modified Posidonia was equal to 81.63 mg g{sup -1}. The pseudo-second-order model was the best to represent adsorption kinetics of DR75. The pseudo-first-order model would be better for fitting the adsorption kinetic process of Pb{sup 2+} onto raw and modified Posidonia. The adsorption isotherms of Pb{sup 2+} could be described by the Jossens equation model. Any of the tested models can describe the adsorption of DR75 onto the studied materials. These results confirm that the adsorption of DR75 from aqueous solution was multilayer.
Directory of Open Access Journals (Sweden)
Gcina Mamba
2016-06-01
Full Text Available Organic and inorganic compounds utilised at different stages of various industrial processes are lost into effluent water and eventually find their way into fresh water sources where they cause devastating effects on the ecosystem due to their stability, toxicity, and non-biodegradable nature. Semiconductor photocatalysis has been highlighted as a promising technology for the treatment of water laden with organic, inorganic, and microbial pollutants. However, these semiconductor photocatalysts are applied in powdered form, which makes separation and recycling after treatment extremely difficult. This not only leads to loss of the photocatalyst but also to secondary pollution by the photocatalyst particles. The introduction of various magnetic nanoparticles such as magnetite, maghemite, ferrites, etc. into the photocatalyst matrix has recently become an area of intense research because it allows for the easy separation of the photocatalyst from the treated water using an external magnetic field. Herein, we discuss the recent developments in terms of synthesis and photocatalytic properties of magnetically separable nanocomposites towards water treatment. The influence of the magnetic nanoparticles in the optical properties, charge transfer mechanism, and overall photocatalytic activity is deliberated based on selected results. We conclude the review by providing summary remarks on the successes of magnetic photocatalysts and present some of the future challenges regarding the exploitation of these materials in water treatment.
Samiey, Babak; Cheng, Chil-Hung; Wu, Jiangning
2014-01-01
Over the past decades, organic-inorganic hybrid polymers have been applied in different fields, including the adsorption of pollutants from wastewater and solid-state separations. In this review, firstly, these compounds are classified. These compounds are prepared by sol-gel method, self-assembly process (mesopores), assembling of nanobuilding blocks (e.g., layered or core-shell compounds) and as interpenetrating networks and hierarchically structures. Lastly, the adsorption characteristics of heavy metals of these materials, including different kinds of functional groups, selectivity of them for heavy metals, effect of pH and synthesis conditions on adsorption capacity, are studied. PMID:28788483
Climatic effects of air pollutants over china: A review
Liao, Hong; Chang, Wenyuan; Yang, Yang
2015-01-01
Tropospheric ozone (O3) and aerosols are major air pollutants in the atmosphere. They have also made significant contributions to radiative forcing of climate since preindustrial times. With its rapid economic development, concentrations of air pollutants are relatively high in China; hence, quantifying the role of air pollutants in China in regional climate change is especially important. This review summarizes existing knowledge with regard to impacts of air pollutants on climate change in China and defines critical gaps needed to reduce the associated uncertainties. Measured monthly, seasonal, and annual mean surface-layer concentrations of O3 and aerosols over China are compiled in this work, with the aim to show the magnitude of concentrations of O3 and aerosols over China and to provide datasets for evaluation of model results in future studies. Ground-based and satellite measurements of O3 column burden and aerosol optical properties, as well as model estimates of radiative forcing by tropospheric O3 and aerosols are summarized. We also review regional and global modeling studies that have investigated climate change driven by tropospheric O3 and/or aerosols in China; the predicted sign and magnitude of the responses in temperature and precipitation to O3/aerosol forcings are presented. Based on this review, key priorities for future research on the climatic effects of air pollutants in China are highlighted.
Federal Laboratory Consortium — The inorganic Coatings Lab provides expertise to Navy and Joint Service platforms acquisition IPTs to aid in materials and processing choices which balance up-front...
Medicinal Uses of Inorganic Compounds - 2
Indian Academy of Sciences (India)
In the first part of this article, we described medicinal uses of inorganic compounds relating to cancer care, infection and diabetic control, neurological, cardiovascular and in- flammatory diseases. This article contains further infor- mation on the medicinal uses of inorganic compounds as therapeutic and diagnostic in ...
Fate, behaviour and weathering of priority HNS in the marine environment: An online tool
International Nuclear Information System (INIS)
Cunha, Isabel; Oliveira, Helena; Neuparth, Teresa; Torres, Tiago; Santos, Miguel Machado
2016-01-01
Literature data and data obtained with modelling tools were compiled to derive the physicochemical behaviour of 24 priority Hazardous and Noxious Substances (HNS), as a proxy to improve environmental, public health and political issues in relation to HNS spills. Parameters that rule the HNS behaviour in water and those that determine their distribution and persistence in the environment, such as fugacity, physicochemical degradation, biodegradation, bioaccumulation/biotransformation and aquatic toxicity, were selected. Data systematized and produced in the frame of the Arcopol Platform project was made available through a public database ( (http://www.ciimar.up.pt/hns/substances.php)). This tool is expected to assist stakeholders involved in HNS spills preparedness and response, policy makers and legislators, as well as to contribute to a current picture of the scientific knowledge on the fate, behaviour, weathering and toxicity of priority HNS, being essential to support future improvements in maritime safety and coastal pollution response before, during and after spill incidents. - Highlights: • Fate, behaviour and weathering of priority HNS in marine environments are addressed. • Environmental and public health issues in relation to HNS spills are discussed. • Physicochemical behaviour is derived through mathematical tools and literature data. • Data produced are made available through a public online database. • Database can assist relevant bodies involved in HNS spills preparedness and response.
Priority actions (Environmental protection in Macedonia)
International Nuclear Information System (INIS)
1997-01-01
The priority actions were based on environmental needs in the short to medium term, keeping in mind that there are severe budgetary constraints and the environmental institutions are still being developed. The private sector will be encouraged to participate, wherever possible in implementing the priority actions.Based on the evaluation of all the environmental priorities, the following are considered priority actions which should be addressed within the next five years: air quality improvement; water quality improvement; solid waste management; biodiversity conservation; renewal and preservation of forests; technical assistance. (author)
Elordui-Zapatarietxe, S.; Fettig, I.; Philipp, R.; Gantois, F.; Lalère, B.; Swart, C.; Petrov, P.; Goenaga-Infante, H.; Vanermen, G.; Boom, G.; Emteborg, H.
2015-01-01
One of the unresolved issues of the European Water Framework Directive is the unavailability of realistic water reference materials for the organic priority pollutants at low nanogram-per-liter concentrations. In the present study, three different types of ready-to-use water test materials were
2014-08-19
The Assistant Secretary for Special Education and Rehabilitative Services announces a priority under the Rehabilitation Training program to establish a Job-Driven Vocational Rehabilitation Technical Assistance Center (JDVRTAC). The Assistant Secretary may use this priority for competitions in fiscal year (FY) 2014 and later years. We take this action to focus on training in an area of national need. Specifically, this priority responds to the Presidential Memorandum to Federal agencies directing them to take action to address job-driven training for the Nation's workers. The JDVRTAC will provide technical assistance (TA) to State vocational rehabilitation (VR) agencies to help them develop for individuals with disabilities training and employment opportunities that meet the needs of today's employers.
The contribution of ship emissions to air pollution in the North Sea regions
Energy Technology Data Exchange (ETDEWEB)
Matthias, Volker, E-mail: volker.matthias@gkss.d [GKSS Research Centre Geesthacht, Institute for Coastal Research, Max-Planck-Strasse 1, 21502 Geesthacht (Germany); Bewersdorff, Ines [GKSS Research Centre Geesthacht, Institute for Coastal Research, Max-Planck-Strasse 1, 21502 Geesthacht (Germany); Aulinger, Armin, E-mail: armin.aulinger@gkss.d [GKSS Research Centre Geesthacht, Institute for Coastal Research, Max-Planck-Strasse 1, 21502 Geesthacht (Germany); Quante, Markus, E-mail: markus.quante@gkss.d [GKSS Research Centre Geesthacht, Institute for Coastal Research, Max-Planck-Strasse 1, 21502 Geesthacht (Germany)
2010-06-15
As a consequence of the global distribution of manufacturing sites and the increasing international division of labour, ship traffic is steadily increasing and is becoming more and more important as an origin of air pollution. This study investigates the impact of ship emissions in coastal areas of the North Sea under conditions of the year 2000 by means of a regional chemistry transport model which runs on a sufficiently high resolution to study air pollution in coastal regions. It was found that northern Germany and Denmark in summer suffer from more than 50% higher sulphate, nitrate and ammonium aerosol concentrations due to contributions from ships. The implementation of a sulphur emission control area (SECA) in the North Sea, as it was implemented at the end of 2007, directly results in reduced sulphur dioxide and sulphate aerosol concentrations while nitrate aerosol concentrations are slightly increased. - Ship emissions lead to significantly enhanced air pollution by secondary inorganic aerosols in North Sea coastal areas.
Recent Advances in Bio-inorganic Chemistry
Indian Academy of Sciences (India)
Unknown
Bio-inorganic chemistry has developed rapidly in recent years. A number of laboratories in India have made significant contributions to this area. The motivation in bringing out this special issue on Bio-inorganic. Chemistry is to highlight the recent work emerging from India in this important and fascinating interdisci-.
Inorganic-whisker-reinforced polymer composites synthesis, properties and applications
Sun, Qiuju
2015-01-01
Inorganic-Whisker-Reinforced Polymer Composites: Synthesis, Properties and Applications gives a comprehensive presentation of inorganic microcrystalline fibers, or whiskers, a polymer composite filler. It covers whisker synthesis, surface modification, applications for reinforcing polymer-matrix composites, and analysis of resulting filled polymer composites. It focuses on calcium carbonate whiskers as a primary case study, introducing surface treatment methods for calcium carbonate whiskers and factors that influence them. Along with calcium carbonate, the book discusses potassium titanate and aluminum borate whiskers, which also comprise the new generation of inorganic whiskers. According to research results, composites filled by inorganic whiskers show improved strength, wear-resistance, thermal conductivity, and antistatic properties. It explains the importance of modifying polymer materials for use with inorganic whiskers and describes preparation and evaluation methods of polymers filled with inorganic ...
Effect of industrial pollution on behaviour of radionuclides in forest ecosystems
International Nuclear Information System (INIS)
Outola, I.
2009-01-01
To investigate how and to what extent industrial pollution affects the behaviour of radionuclides in forest ecosystems, studies were conducted in the vicinity of two Cu-Ni smelters: one in a pine forest at Harjavalta, Finland, and the other in a spruce forest at Monchegorsk, Russia. Industrial pollution had significant effects on the distribution of radionuclides in soil horizons. With the increase in pollution towards the smelter, radionuclides were accumulated more in the litter layer because the conversion of litter into organic material was diminished due to inhibited microbial activity. As a result, the organic layer contained less radionuclides towards the smelter. The effect of industrial pollution on soil-to-plant transfer was complex. The effect varied with radionuclide, plant species and also on forest type. For 137 Cs, soil-to-plant transfer decreased significantly as industrial pollution increased in pine forest, whereas the decrease was less pronounced in spruce forest. Root uptake of 239,240 Pu by plants is extremely small, and plant contamination by resuspended soil is an important factor in considering the soil-to-plant transfer of this radionuclide. In spruce forest, more plutonium was transferred into plants when pollution load increased due to resuspension of litter particles, which contained higher concentrations of plutonium in the vicinity of the smelter. Soil-to-plant transfer of plutonium was much less affected in pine forests contaminated with industrial pollution. This research clearly indicates the sensitivity of the northern forest ecosystem to inorganic pollutants. Prediction of the soil-to-plant transfer of radionuclides in industrially polluted forest ecosystems requires detailed information on the total deposition, vertical distribution of radionuclides in soil, soil microbiological factors, other soil parameters as well as the rooting depths of the plants. (LN)
Earle-Richardson, Giulia; Scribani, Melissa; Wyckoff, Lynae; Strogatz, David; May, John; Jenkins, Paul
2015-01-01
New York, like many other states, provides county-level health statistics for use in local priority settings but does not provide any data on public views about priority health issues. This study assessed whether health department priorities are notably different from community concerns about health, and how both groups' priorities compare with local health statistics. Data from a 2009 rural survey on community health concerns were compared to priorities named by the seven area county health departments, and to local health indicator data. Health care/insurance cost (60%), obesity (53%), and prescription cost (41%) were leading community concerns, regardless of age, education, sex, or Internet in the home. Six of seven county health departments selected access to quality health care (which includes health care/insurance cost) as a leading public health priority, but only three identified obesity. The following leading local health issues were suggested by health indicators: Physical activity and nutrition, Smoking, and Unintentional injury. Health departments diverged from community priorities, from health indicator data, and from one another in choosing priorities. Adding a question about community health priorities to existing state telephone surveys on health behavior and lifestyle would provide an important tool to local health departments. © 2014 Society for Public Health Education.
A comparison of organic and inorganic nitrates/nitrites.
Omar, Sami A; Artime, Esther; Webb, Andrew J
2012-05-15
Although both organic and inorganic nitrates/nitrites mediate their principal effects via nitric oxide, there are many important differences. Inorganic nitrate and nitrite have simple ionic structures and are produced endogenously and are present in the diet, whereas their organic counterparts are far more complex, and, with the exception of ethyl nitrite, are all medicinally synthesised products. These chemical differences underlie the differences in pharmacokinetic properties allowing for different modalities of administration, particularly of organic nitrates, due to the differences in their bioavailability and metabolic profiles. Whilst the enterosalivary circulation is a key pathway for orally ingested inorganic nitrate, preventing an abrupt effect or toxic levels of nitrite and prolonging the effects, this is not used by organic nitrates. The pharmacodynamic differences are even greater; while organic nitrates have potent acute effects causing vasodilation, inorganic nitrite's effects are more subtle and dependent on certain conditions. However, in chronic use, organic nitrates are considerably limited by the development of tolerance and endothelial dysfunction, whereas inorganic nitrate/nitrite may compensate for diminished endothelial function, and tolerance has not been reported. Also, while inorganic nitrate/nitrite has important cytoprotective effects against ischaemia-reperfusion injury, continuous use of organic nitrates may increase injury. While there are concerns that inorganic nitrate/nitrite may induce carcinogenesis, direct evidence of this in humans is lacking. While organic nitrates may continue to dominate the therapeutic arena, this may well change with the increasing recognition of their limitations, and ongoing discovery of beneficial effects and specific advantages of inorganic nitrate/nitrite. Copyright © 2012 Elsevier Inc. All rights reserved.
Setting priorities for safeguards upgrades
International Nuclear Information System (INIS)
Al-Ayat, R.A.; Judd, B.R.; Patenaude, C.J.; Sicherman, A.
1987-01-01
This paper describes an analytic approach and a computer program for setting priorities among safeguards upgrades. The approach provides safeguards decision makers with a systematic method for allocating their limited upgrade resources. The priorities are set based on the upgrades cost and their contribution to safeguards effectiveness. Safeguards effectiveness is measured by the probability of defeat for a spectrum of potential insider and outsider adversaries. The computer program, MI$ER, can be used alone or as a companion to ET and SAVI, programs designed to evaluate safeguards effectiveness against insider and outsider threats, respectively. Setting the priority required judgments about the relative importance (threat likelihoods and consequences) of insider and outsider threats. Although these judgments are inherently subjective, MI$ER can analyze the sensitivity of the upgrade priorities to these weights and determine whether or not they are critical to the priority ranking. MI$ER produces tabular and graphical results for comparing benefits and identifying the most cost-effective upgrades for a given expenditure. This framework provides decision makers with an explicit and consistent analysis to support their upgrades decisions and to allocate the safeguards resources in a cost-effective manner
Directory of Open Access Journals (Sweden)
Mohammad Malakootian
2016-08-01
Full Text Available Introduction: The most important environmental problem of automotive industries is the produced wastewater due to its various processes. The flocculation and coagulation along with chemical sequestration are among important processes for removing contaminants from wastewaters. The aim of this study is to investigate the efficiency of coagulation and flocculation process along with chemical sequestration in the removal of organic and inorganic pollutants from automotive industry sewage. Study Method: This study is an applied-experimental study. The removal of organic and inorganic substances by coagulation, flocculation process combined with chemical sequestration was carried out in batch reactors. The parameters turbidity, heavy metals' concentration, color, phosphate, coagulants concentration, exposure time, TSS, pH and COD were studied. The concentration of color and residue of heavy metals were determined using spectrophotometer -UV and atomic absorption. Results: The research results showed that the removal percentage of Cr, Ni, Pb and Zn by ferric sulfate combined with lime at a pH equal to 10 and the exposure time of 100 minutes were 52.65, 96.3, 3.27 and 100 respectively, and percentage of removing them by aluminum sulfate combined with lime was 52.65, 97.8, 3.37 and 99.81 respectively. the removal percentage of TSS, COD, color, turbidity, phosphates ferric sulfate was also 68.9, 83, 94, 84 and 47.2 respectively, and this amount of removal by aluminum sulfate was 62, 80, 94, 73.5 and 48 respectively at neutral pH and concentration of coagulant was obtained equal to 150 mg / L. Conclusion: According to the results, the use of coagulation and flocculation process combined with chemical sequestration in the removal of organic and inorganic pollutants in wastewaters of automotive industry achieved under optimal conditions is very effective and can be used in water treatment of automotive industry.
Research priorities for public mental health in Europe
DEFF Research Database (Denmark)
Forsman, Anna K; Wahlbeck, Kristian; Aarø, Leif Edvard
2015-01-01
experts were involved in the priority setting process. RESULTS: Twenty priorities for public mental health research were identified through the consensus process. The research priorities were divided into summary principles-encompassing overall recommendations for future public mental health research...... field. METHODS: Experts were invited to compile and discuss research priorities in a series of topic-based scientific workshops. In addition, a Delphi process was carried out to reach consensus on the list of research priorities and their rank order. Three web-based surveys were conducted. Nearly 60...... in Europe-and thematic research priorities, including area-specific top priorities on research topics and methods. The priorities represent three overarching goals mirroring societal challenges, that is, to identify causes, risk and protective factors for mental health across the lifespan; to advance...
Inorganic arsenic levels in baby rice are of concern
International Nuclear Information System (INIS)
Meharg, Andrew A.; Sun, Guoxin; Williams, Paul N.; Adomako, Eureka; Deacon, Claire; Zhu, Yong-Guan; Feldmann, Joerg; Raab, Andrea
2008-01-01
Inorganic arsenic is a chronic exposure carcinogen. Analysis of UK baby rice revealed a median inorganic arsenic content (n = 17) of 0.11 mg/kg. By plotting inorganic arsenic against total arsenic, it was found that inorganic concentrations increased linearly up to 0.25 mg/kg total arsenic, then plateaued at 0.16 mg/kg at higher total arsenic concentrations. Inorganic arsenic intake by babies (4-12 months) was considered with respect to current dietary ingestion regulations. It was found that 35% of the baby rice samples analysed would be illegal for sale in China which has regulatory limit of 0.15 mg/kg inorganic arsenic. EU and US food regulations on arsenic are non-existent. When baby inorganic arsenic intake from rice was considered, median consumption (expressed as μg/kg/d) was higher than drinking water maximum exposures predicted for adults in these regions when water intake was expressed on a bodyweight basis. - Median consumption of organic arsenic levels for UK babies from baby rice is above threshold considered safe
Pate, Ryan; Lantz, Kevin R.; Dhawan, Anuj; Vo-Dinh, Tuan; Stiff-Roberts, Adrienne D.
2010-10-01
In this research, resonant infrared matrix-assisted pulsed laser evaporation (RIR-MAPLE) has been used to deposit different classes of inorganic nanoparticles, including bare, un-encapsulated ZnO and Au nanoparticles, as well as ligand-encapsulated CdSe colloidal quantum dots (CQDs). RIR-MAPLE has been used for thin-film deposition of different organic/inorganic hybrid nanocomposites using some of these inorganic nanoparticles, including CdSe CQD-poly[2-methoxy-5-(2'-ethylhexyloxy)-1,4-(1-cyanovinylene)phenylene] (MEH-CN-PPV) nanocomposites and Au nanoparticle-poly(methyl methacrylate) (PMMA) nanocomposites. The unique contribution of this research is that a technique is demonstrated for the deposition of organic-based thin-films requiring solvents with bond energies that do not have to be resonant with the laser energy. By creating an emulsion of solvent and ice in the target, RIR-MAPLE using a 2.94 μm laser can deposit most material systems because the hydroxyl bonds in the ice component of the emulsion matrix are strongly resonant with the 2.94 μm laser. In this way, the types of materials that can be deposited using RIR-MAPLE has been significantly expanded. Furthermore, materials with different solvent bond energies can be co-deposited without concern for material degradation and without the need to specifically tune the laser energy to each material solvent bond energy, thereby facilitating the realization of organic/inorganic hybrid nanocomposite thin-films. In addition to the structural characterization of the inorganic nanoparticle and hybrid nanocomposite thin-films deposited using this RIR-MAPLE technique, optical characterization is presented to demonstrate the potential of such films for optoelectronic device applications.
International Nuclear Information System (INIS)
Pate, Ryan; Lantz, Kevin R.; Stiff-Roberts, Adrienne D.; Dhawan, Anuj; Vo-Dinh, Tuan
2010-01-01
In this research, resonant infrared matrix-assisted pulsed laser evaporation (RIR-MAPLE) has been used to deposit different classes of inorganic nanoparticles, including bare, un-encapsulated ZnO and Au nanoparticles, as well as ligand-encapsulated CdSe colloidal quantum dots (CQDs). RIR-MAPLE has been used for thin-film deposition of different organic/inorganic hybrid nanocomposites using some of these inorganic nanoparticles, including CdSe CQD-poly[2-methoxy-5-(2'-ethylhexyloxy )-1,4-(1-cyanovinylene)phenylene](MEH-CN-PPV) nanocomposites and Au nanoparticle-poly(methyl methacrylate)(PMMA) nanocomposites. The unique contribution of this research is that a technique is demonstrated for the deposition of organic-based thin-films requiring solvents with bond energies that do not have to be resonant with the laser energy. By creating an emulsion of solvent and ice in the target, RIR-MAPLE using a 2.94 μm laser can deposit most material systems because the hydroxyl bonds in the ice component of the emulsion matrix are strongly resonant with the 2.94 μm laser. In this way, the types of materials that can be deposited using RIR-MAPLE has been significantly expanded. Furthermore, materials with different solvent bond energies can be co-deposited without concern for material degradation and without the need to specifically tune the laser energy to each material solvent bond energy, thereby facilitating the realization of organic/inorganic hybrid nanocomposite thin-films. In addition to the structural characterization of the inorganic nanoparticle and hybrid nanocomposite thin-films deposited using this RIR-MAPLE technique, optical characterization is presented to demonstrate the potential of such films for optoelectronic device applications.
Energy Technology Data Exchange (ETDEWEB)
Yamauchi, H.; Takahashi, K.; Mashiko, M.; Yamamura, Y. (St. Marianna Univ. School of Medicine, Kawasaki (Japan))
1989-11-01
In an attempt to establish a method for biological monitoring of inorganic arsenic exposure, the chemical species of arsenic were measured in the urine and hair of gallium arsenide (GaAs) plant and copper smelter workers. Determination of urinary inorganic arsenic concentration proved sensitive enough to monitor the low-level inorganic arsenic exposure of the GaAs plant workers. The urinary inorganic arsenic concentration in the copper smelter workers was far higher than that of a control group and was associated with high urinary concentrations of the inorganic arsenic metabolites, methylarsonic acid (MAA) and dimethylarsinic acid (DMAA). The results established a method for exposure level-dependent biological monitoring of inorganic arsenic exposure. Low-level exposures could be monitored only by determining urinary inorganic arsenic concentration. High-level exposures clearly produced an increased urinary inorganic arsenic concentration, with an increased sum of urinary concentrations of inorganic arsenic and its metabolites (inorganic arsenic + MAA + DMAA). The determination of urinary arsenobetaine proved to determine specifically the seafood-derived arsenic, allowing this arsenic to be distinguished clearly from the arsenic from occupational exposure. Monitoring arsenic exposure by determining the arsenic in the hair appeared to be of value only when used for environmental monitoring of arsenic contamination rather than for biological monitoring.
Directory of Open Access Journals (Sweden)
Hamisu M. Salihu
2015-07-01
Full Text Available Background. Providing practitioners with an intuitive measure for priority setting that can be combined with diverse data collection methods is a necessary step to foster accountability of the decision-making process in community settings. Yet, there is a lack of easy-to-use, but methodologically robust measures, that can be feasibly implemented for reliable decision-making in community settings. To address this important gap in community based participatory research (CBPR, the purpose of this study was to demonstrate the utility, applicability, and validation of a community priority index in a community-based participatory research setting. Design and Methods. Mixed-method study that combined focus groups findings, nominal group technique with six key informants, and the generation of a Community Priority Index (CPI that integrated community importance, changeability, and target populations. Bootstrapping and simulation were performed for validation. Results. For pregnant mothers, the top three highly important and highly changeable priorities were: stress (CPI=0.85; 95%CI: 0.70, 1.00, lack of affection (CPI=0.87; 95%CI: 0.69, 1.00, and nutritional issues (CPI=0.78; 95%CI: 0.48, 1.00. For non-pregnant women, top priorities were: low health literacy (CPI=0.87; 95%CI: 0.69, 1.00, low educational attainment (CPI=0.78; 95%CI: 0.48, 1.00, and lack of self-esteem (CPI=0.72; 95%CI: 0.44, 1.00. For children and adolescents, the top three priorities were: obesity (CPI=0.88; 95%CI: 0.69, 1.00, low self-esteem (CPI=0.81; 95%CI: 0.69, 0.94, and negative attitudes toward education (CPI=0.75; 95%CI: 0.50, 0.94. Conclusions. This study demonstrates the applicability of the CPI as a simple and intuitive measure for priority setting in CBPR.
Methods for Introducing Inorganic Polymer Concepts throughout the Undergraduate Curriculum
de Lill, Daniel T.; Carraher, Charles E., Jr.
2017-01-01
Inorganic polymers can be introduced in a variety of undergraduate courses to discuss concepts related to polymer chemistry. Inorganic polymers such as silicates and polysiloxanes are simple materials that can be incorporated into an introductory or descriptive inorganic course. Polymers based on inorganic carbon, including diamond and graphite,…
A study of the concentration of certain inorganic air pollutants in the city of Elefsis
International Nuclear Information System (INIS)
Katselis, V.; Paradellis, T.
1981-11-01
The airborne concentration of Ca, Fe, Zn, Mn, Pb and Br pollutants has been measured in the city of Elefsis during 1977. The results obtained are compared with data obtained during 1975 in the same site, as well as with data obtained from the site of the NRC Democritus during 1977. (author)
Balancing of the air pollution relief through new technologies in the new Laender of Germany
International Nuclear Information System (INIS)
Kampet, T.; Broege, M.; Jappe, H.; Jones, E.; Koerner, T.; Lindner, H.
1992-01-01
The air pollution relief through the application of new technologies in the new Federal states is balanced. Content: objective and method, energy and environmental situation in the new Federal states in 1989, tendency development of the environmental impact due to energy in the new Federal states up to 2010, possible environmental relief through an increased utilization of renewable energy and new energy technologies (scenario), cost-benefit aspects of a stranger utilization of new energy technologies and renewable energy. The appendices contain indications on the energy situation and air pollution emissions due to energy (sulfur dioxide, nitrogen oxide, carbon dioxide, dust) in the GDR of 1989 as a whole and in the single new Federal states, results of expert discussions about the environmental effects of energy technologies and energy economic priorities in the five new Federal states and about measure priorities for the introduction of newest energy technologies and increased utilization of renewable energy in the new five Federal states up to 2010 as well as test calculation regarding environmental relief effects of alternative measure options. (BBR) [de
Priority Setting for Occupational Cancer Prevention
Directory of Open Access Journals (Sweden)
Cheryl E. Peters
2018-06-01
Full Text Available Background: Selecting priority occupational carcinogens is important for cancer prevention efforts; however, standardized selection methods are not available. The objective of this paper was to describe the methods used by CAREX Canada in 2015 to establish priorities for preventing occupational cancer, with a focus on exposure estimation and descriptive profiles. Methods: Four criteria were used in an expert assessment process to guide carcinogen prioritization: (1 the likelihood of presence and/or use in Canadian workplaces; (2 toxicity of the substance (strength of evidence for carcinogenicity and other health effects; (3 feasibility of producing a carcinogen profile and/or an occupational estimate; and (4 special interest from the public/scientific community. Carcinogens were ranked as high, medium or low priority based on specific conditions regarding these criteria, and stakeholder input was incorporated. Priorities were set separately for the creation of new carcinogen profiles and for new occupational exposure estimates. Results: Overall, 246 agents were reviewed for inclusion in the occupational priorities list. For carcinogen profile generation, 103 were prioritized (11 high, 33 medium, and 59 low priority, and 36 carcinogens were deemed priorities for occupational exposure estimation (13 high, 17 medium, and 6 low priority. Conclusion: Prioritizing and ranking occupational carcinogens is required for a variety of purposes, including research, resource allocation at different jurisdictional levels, calculations of occupational cancer burden, and planning of CAREX-type projects in different countries. This paper outlines how this process was achieved in Canada; this may provide a model for other countries and jurisdictions as a part of occupational cancer prevention efforts. Keywords: cancer prevention, carcinogen exposure, occupational health
Kang, Moon-Sung; Choi, Yong-Jin; Moon, Seung-Hyeon
2004-05-15
An approach to enhancing the water-splitting performance of bipolar membranes (BPMs) is introducing an inorganic substance at the bipolar (BP) junction. In this study, the immobilization of inorganic matters (i.e., iron hydroxides and silicon compounds) at the BP junction and the optimum concentration have been investigated. To immobilize these inorganic matters, novel methods (i.e., electrodeposition of the iron hydroxide and processing of the sol-gel to introduce silicon groups at the BP junction) were suggested. At optimal concentrations, the immobilized inorganic matters significantly enhanced the water-splitting fluxes, indicating that they provide alternative paths for water dissociation, but on the other hand possibly reduce the polarization of water molecules between the sulfonic acid and quaternary ammonium groups at high contents. Consequently, the amount of inorganic substances introduced should be optimized to obtain the maximum water splitting in the BPM.
Optimal Priority Structure, Capital Structure, and Investment
Dirk Hackbarth; David C. Mauer
2012-01-01
We study the interaction between financing and investment decisions in a dynamic model, where the firm has multiple debt issues and equityholders choose the timing of investment. Jointly optimal capital and priority structures can virtually eliminate investment distortions because debt priority serves as a dynamically optimal contract. Examining the relative efficiency of priority rules observed in practice, we develop several predictions about how firms adjust their priority structure in res...
DEFF Research Database (Denmark)
Butera, Stefania; Christensen, Thomas Højlund; Astrup, Thomas Fruergaard
2014-01-01
Thirty-three samples of construction and demolition waste collected at 11 recycling facilities in Denmark were characterised in terms of total content and leaching of inorganic elements and presence of the persistent organic pollutants PCBs and PAHs. Samples included (i) "clean" (i.e. unmixed...... for leaching, was observed indicating that the number of analysed samples may be critical in relation to decisions regarding management and utilisation of the materials. Higher leaching of chromium, sulphate and chloride were observed for masonry-containing and partly carbonated samples, indicating that source...... segregation and management practices may be important. Generally, leaching was in compliance with available leaching limits, except for selenium, and in some cases chromium, sulphate and antimony. © 2014 Elsevier B.V....
Synthesis of boehmite by hydrothermal treatment used as inorganic binder for alumina powder
International Nuclear Information System (INIS)
Lima, M.B.; Tercini, M.B.; Yoshimura, H.N.
2012-01-01
Presently, due to the concerns with the environment, it has been developed studies to replace the organic binder by an inorganic binder for forming of ceramic powders, in order to avoiding the generation of polluting gases during sintering (firing). A potential alternative is the use of boehmite, produced by hydrothermal treatment on the surfaces of the alumina powder, previously ground in a ball mill using zirconia milling media to produce hydrated phases on alumina powder which are converted to boehmite. In the treated alumina powders, it was observed the formation of boehmite phase by X-ray diffraction analysis and Fourier transformed infrared (FTIR) spectroscopy, demonstrating the efficiency of boehmite formation during the hydrothermal treatment at 150°C for 3 hours.(author)
Zeta potential control in decontamination with inorganic membranes and inorganic adsorbents
Energy Technology Data Exchange (ETDEWEB)
Andalaft, E; Vega, R; Correa, M; Araya, R; Loyola, P [Comision Chilena de Energia Nuclear, Santiago (Chile)
1997-02-01
The application of some advanced separation processes such as microfiltration and ultrafiltration, electroosmosis and electrodialysis for treating nuclear waste from different aqueous streams is under examination at the Chilean Commission for Nuclear Energy. The application of these techniques can be extended to regular industrial wastes when economically advisable. This report deals mainly with electrodialysis, electroosmosis and adsorption with inorganic materials. Special attention is paid to zeta potential control as a driving factor to electroosmosis. For radioactive contaminants that are present in the form of cations, anions, non-ionic solutions, colloids and suspended matter, appropriate combination of the processes may considerably increase the efficiency of processes used. As an example, colloids and suspended particles may be retained in porous ceramic membranes by nanofiltration, ultrafiltration or microfiltration depending on the particle size of the particles. The control of zeta potential by acting in the solid phase or else on the liquid phase has been studied; a mathematical model to predict electrodialysis data has been developed, and finally, the use of a home-made inorganic adsorbent illustrated. The effect of gamma irradiation on the membranes has also been studied. Properties such as salt retention, water flux and pore size diameter determined on both organic and inorganic membranes before and after irradiation indicate deterioration of the organic membrane. (author). 13 refs, 15 figs, 2 tabs.
Zeta potential control in decontamination with inorganic membranes and inorganic adsorbents
International Nuclear Information System (INIS)
Andalaft, E.; Vega, R.; Correa, M.; Araya, R.; Loyola, P.
1997-01-01
The application of some advanced separation processes such as microfiltration and ultrafiltration, electroosmosis and electrodialysis for treating nuclear waste from different aqueous streams is under examination at the Chilean Commission for Nuclear Energy. The application of these techniques can be extended to regular industrial wastes when economically advisable. This report deals mainly with electrodialysis, electroosmosis and adsorption with inorganic materials. Special attention is paid to zeta potential control as a driving factor to electroosmosis. For radioactive contaminants that are present in the form of cations, anions, non-ionic solutions, colloids and suspended matter, appropriate combination of the processes may considerably increase the efficiency of processes used. As an example, colloids and suspended particles may be retained in porous ceramic membranes by nanofiltration, ultrafiltration or microfiltration depending on the particle size of the particles. The control of zeta potential by acting in the solid phase or else on the liquid phase has been studied; a mathematical model to predict electrodialysis data has been developed, and finally, the use of a home-made inorganic adsorbent illustrated. The effect of gamma irradiation on the membranes has also been studied. Properties such as salt retention, water flux and pore size diameter determined on both organic and inorganic membranes before and after irradiation indicate deterioration of the organic membrane. (author). 13 refs, 15 figs, 2 tabs
Waldau, Susanne; Lindholm, Lars; Wiechel, Anna Helena
2010-08-01
In the Västerbotten County Council in Sweden a priority setting process was undertaken to reallocate existing resources for funding of new methods and activities. Resources were created by limiting low priority services. A procedure for priority setting was constructed and fully tested by engaging the entire organisation. The procedure included priority setting within and between departments and political decision making. Participants' views and experiences were collected as a basis for future improvement of the process. Results indicate that participants appreciated the overall approach and methodology and wished to engage in their improvement. Among the improvement proposals is prolongation of the process in order to improve the knowledge base quality. The procedure for identification of new items for funding also needs to be revised. The priority setting process was considered an overall success because it fulfilled its political goals. Factors considered crucial for success are a wish among managers for an economic strategy that addresses existing internal resource allocation; process management characterized by goal orientation and clear leadership; an elaborate communications strategy integrated early in the process and its management; political unity in support of the procedure, and a strong political commitment throughout the process. Generalizability has already been demonstrated by several health care organisations that performed processes founded on this working model. Copyright 2010 Elsevier Ireland Ltd. All rights reserved.
Czech Academy of Sciences Publication Activity Database
Čejka, Jiří; Morris, R. E.; Nachtigall, P.; Roth, Wieslaw Jerzy
2014-01-01
Roč. 43, č. 27 (2014), s. 10274-10275 ISSN 1477-9226 Institutional support: RVO:61388955 Keywords : layered inorganic solids * physical chemistry * catalysis Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 4.197, year: 2014
Application of Monte-Carlo method in definition of key categories of most radioactive polluted soil
International Nuclear Information System (INIS)
Mahmudov, H.M.; Valibeyova, G.; Jafarov, Y.D.; Musaeva, Sh.Z.
2006-01-01
Full text: The principle of analysis by Monte Carlo method consists of a choice of random variables of coefficients of an exposition doze capacities of radiation and data on activity within the boundaries of their individual density of frequency distribution upon corresponding sizes of exposition doses capacities. This procedure repeats for many times using computer and results of each round of calculations create universal density of frequency distribution of exposition doses capacities. The analysis using Monte Carlo method can be carried out at the level of radiation polluted soil categories. The analysis by Monte Carlo method is useful for realization of sensitivity analysis of measured capacity amount of an exposition dose in order to define the major factors causing uncertainty in reports. Reception of such conceptions can be valuable for definition of key categories of radiation polluted soil and establishment of priorities to use resources for enhancement of the report. Relative uncertainty of radiation polluted soil categories determined with the help of the analysis by Monte Carlo method in case of their availability can be applied using more significant divergence between average value and a confidential limit in case when borders of a confidential interval are asymmetric. It is important to determine key categories of radiation polluted soil to establish priorities to use reports of resources available for preparation and to prepare possible estimations for the most significant categories of sources. Usage of the notion u ncertainty i n reports also allows to set threshold value for a key category of sources, if it is necessary, for exact reflection of 90 percent uncertainty in reports. According to radiation safety norms level of radiation background exceeding 33 mkR/hour is considered dangerous. By calculated Monte Carlo method much more dangerous sites and sites frequently imposed to disposals and utilization were chosen from analyzed samples of
Application of Monte-Carlo method in definition of key categories of most radioactive polluted soil
Energy Technology Data Exchange (ETDEWEB)
Mahmudov, H M; Valibeyova, G; Jafarov, Y D; Musaeva, Sh Z [Institute of Radiation Problems, Azerbaijan National Academy of Sciences, Baku (Azerbaijan)
2006-11-15
Full text: The principle of analysis by Monte Carlo method consists of a choice of random variables of coefficients of an exposition doze capacities of radiation and data on activity within the boundaries of their individual density of frequency distribution upon corresponding sizes of exposition doses capacities. This procedure repeats for many times using computer and results of each round of calculations create universal density of frequency distribution of exposition doses capacities. The analysis using Monte Carlo method can be carried out at the level of radiation polluted soil categories. The analysis by Monte Carlo method is useful for realization of sensitivity analysis of measured capacity amount of an exposition dose in order to define the major factors causing uncertainty in reports. Reception of such conceptions can be valuable for definition of key categories of radiation polluted soil and establishment of priorities to use resources for enhancement of the report. Relative uncertainty of radiation polluted soil categories determined with the help of the analysis by Monte Carlo method in case of their availability can be applied using more significant divergence between average value and a confidential limit in case when borders of a confidential interval are asymmetric. It is important to determine key categories of radiation polluted soil to establish priorities to use reports of resources available for preparation and to prepare possible estimations for the most significant categories of sources. Usage of the notion {sup u}ncertainty{sup i}n reports also allows to set threshold value for a key category of sources, if it is necessary, for exact reflection of 90 percent uncertainty in reports. According to radiation safety norms level of radiation background exceeding 33 mkR/hour is considered dangerous. By calted Monte Carlo method much more dangerous sites and sites frequently imposed to disposals and utilization were chosen from analyzed samples of
Essentials of inorganic materials synthesis
Rao, C N R
2015-01-01
This compact handbook describes all the important methods of synthesis employed today for synthesizing inorganic materials. Some features: Focuses on modern inorganic materials with applications in nanotechnology, energy materials, and sustainability Synthesis is a crucial component of materials science and technology; this book provides a simple introduction as well as an updated description of methods Written in a very simple style, providing references to the literature to get details of the methods of preparation when required
Dreissenid mussel research priorities workshop
Sytsma, Mark; Phillips, Stephen; Counihan, Timothy D.
2015-01-01
Currently, dreissenid mussels have yet to be detected in the northwestern part of the United States and western Canada. Infestation of one of the jurisdictions within the mussel-free Pacific Northwest would likely have significant economic, societal and environmental implications for the entire region. Understanding the biology and environmental tolerances of dreissenid mussels, and effectiveness of various management strategies, is key to prevention.On November 4-5, 2015, the Aquatic Bioinvasion Research and Policy Institute and the Center for Lakes and Reservoirs at Portland State University, the US Geological Survey, and the Pacific States Marine Fisheries Commission, convened a Dreissenid Mussel Research Priorities Workshop funded by the Great Northern Landscape Conservation Cooperative. The purpose of the workshop was to review dreissenid research priorities in the 2010 Quagga-Zebra Mussel Action Plan for Western U.S. Waters, reassess those priorities, incorporate new information and emerging trends, and develop priorities to strategically focus research efforts on zebra and quagga mussels in the Pacific Northwest and ensure that future research is focused on the highest priorities. It is important to note that there is some repetition among dreissenid research priority categories (e.g., prevention, detection, control, monitoring, and biology).Workshop participants with research experience in dreissenid mussel biology and management were identified by a literature review. State and federal agency managers were also invited to the workshop to ensure relevancy and practicality of the workshop outcomes. A total of 28 experts (see sidebar) in mussel biology, ecology, and management attended the workshop.
Cardelli, Roberto; Vanni, Giacomo; Marchini, Fausto; Saviozzi, Alessandro
2017-10-12
We assessed the quality of 31 urban soils in Pisa by analyzing total petroleum hydrocarbons (TPHs), Cd, Cr, Cu, Hg, Mn, Ni, Pb, Zn, and the platinum group elements (PGEs). The risk was evaluated by the geological accumulation index (I geo ) and the enrichment factor (EF). Results were compared with those obtained from a non-urban site and with the quantitative limits fixed by Italian legislation. In nearly all the monitored sites, the legal limit for TPH of 60 mg/kg in residential areas was exceeded, indicating widespread and intense pollution throughout the entire city area. The I geo indicated no Cd, Cu, Mn, Ni, and Zn pollution and minimal Pb and Cr pollution due to anthropogenic enrichment. Legal Hg and Zn limits of 1 and 150 mg/kg, respectively, were exceeded in about 20% of sites; Cd (2 mg/kg), Cr (150 mg/kg), and Cu (120 mg/kg) in only one site; and the Ni legal limit of 120 mg/kg was never exceeded. Some urban soils showed a higher Hg level than the more restrictive legal limit of 5 mg/kg concerning areas for industrial use. Based on the soluble, exchangeable, and carbonate-bound fractions, Mn and Zn showed the highest mobility, suggesting a more potential risk of soil contamination than the other metals. The TPH and both Cr and Hg amounts were not correlated with any of the other monitored metals. The total contents of Cd, Pb, Zn, and Cu in soils were positively correlated with each other, suggesting a common origin from vehicular traffic. The PGE values (Pt and Pd) were below the detection limits in 75%-90% of the monitored areas, suggesting that their accumulation is at an early stage.
A strategy to improve priority setting in developing countries.
Kapiriri, Lydia; Martin, Douglas K
2007-09-01
Because the demand for health services outstrips the available resources, priority setting is one of the most difficult issues faced by health policy makers, particularly those in developing countries. Priority setting in developing countries is fraught with uncertainty due to lack of credible information, weak priority setting institutions, and unclear priority setting processes. Efforts to improve priority setting in these contexts have focused on providing information and tools. In this paper we argue that priority setting is a value laden and political process, and although important, the available information and tools are not sufficient to address the priority setting challenges in developing countries. Additional complementary efforts are required. Hence, a strategy to improve priority setting in developing countries should also include: (i) capturing current priority setting practices, (ii) improving the legitimacy and capacity of institutions that set priorities, and (iii) developing fair priority setting processes.
International Nuclear Information System (INIS)
Baloo, S.
1991-08-01
The report summarizes the surface water sampling program at the Amoco Refinery at Yorktown, Virginia. This was undertaken as a part of the joint project between Amoco Corporation and the United States Environmental Protection Agency to review pollution prevention alternatives at a petroleum refinery. The surface water data provides a snapshot of surface water pollutant generation and discharge from the refinery. Different process units contribute to the total wastewater flow of 460 GPM in the refinery. Water in the ditch system, which is non-process water, is free of organic contamination. Oil and grease, phenols, ammonia and sulfides are the significant components measured in the process wastewater. The concentrations of organics in most water streams leaving the individual process units are relatively low, in the 1-5 parts per million (ppm) range. A few individual streams such as the crude desalter brine and tank water draws have high pollutant loadings. Concentrations of metals in the refinery wastewater are very low. The wastewater treatment plant is very effective in reducing the pollutant loading in the water with overall removal efficiencies greater than 99% for most organics and inorganics
Fan, Mingyi; Hu, Jiwei; Cao, Rensheng; Ruan, Wenqian; Wei, Xionghui
2018-06-01
Water pollution occurs mainly due to inorganic and organic pollutants, such as nutrients, heavy metals and persistent organic pollutants. For the modeling and optimization of pollutants removal, artificial intelligence (AI) has been used as a major tool in the experimental design that can generate the optimal operational variables, since AI has recently gained a tremendous advance. The present review describes the fundamentals, advantages and limitations of AI tools. Artificial neural networks (ANNs) are the AI tools frequently adopted to predict the pollutants removal processes because of their capabilities of self-learning and self-adapting, while genetic algorithm (GA) and particle swarm optimization (PSO) are also useful AI methodologies in efficient search for the global optima. This article summarizes the modeling and optimization of pollutants removal processes in water treatment by using multilayer perception, fuzzy neural, radial basis function and self-organizing map networks. Furthermore, the results conclude that the hybrid models of ANNs with GA and PSO can be successfully applied in water treatment with satisfactory accuracies. Finally, the limitations of current AI tools and their new developments are also highlighted for prospective applications in the environmental protection. Copyright © 2018 Elsevier Ltd. All rights reserved.
Inorganic nanolayers: structure, preparation, and biomedical applications
Directory of Open Access Journals (Sweden)
Saifullah B
2015-09-01
Full Text Available Bullo Saifullah, Mohd Zobir B HusseinMaterials Synthesis and Characterization Laboratory, Institute of Advanced Technology (ITMA, Universiti Putra Malaysia, Serdang, MalaysiaAbstract: Hydrotalcite-like compounds are two-dimensional inorganic nanolayers also known as clay minerals or anionic clays or layered double hydroxides/layered hydroxy salts, and have emerged as a single type of material with numerous biomedical applications, such as drug delivery, gene delivery, cosmetics, and biosensing. Inorganic nanolayers are promising materials due to their fascinating properties, such as ease of preparation, ability to intercalate different type of anions (inorganic, organic, biomolecules, and even genes, high thermal stability, delivery of intercalated anions in a sustained manner, high biocompatibility, and easy biodegradation. Inorganic nanolayers have been the focus for researchers over the last decade, resulting in widening application horizons, especially in the field of biomedical science. These nanolayers have been widely applied in drug and gene delivery. They have also been applied in biosensing technology, and most recently in bioimaging science. The suitability of inorganic nanolayers for application in drug delivery, gene delivery, biosensing technology, and bioimaging science makes them ideal materials to be applied for theranostic purposes. In this paper, we review the structure, methods of preparation, and latest advances made by inorganic nanolayers in such biomedical applications as drug delivery, gene delivery, biosensing, and bioimaging.Keywords: inorganic nanolayers, layered double hydroxides, layered hydroxy salts, drug delivery, biosensors, bioimaging
Inorganic Membranes: Preparation and Application for Water Treatment and Desalination
Directory of Open Access Journals (Sweden)
Ahmad Kayvani Fard
2018-01-01
Full Text Available Inorganic membrane science and technology is an attractive field of membrane separation technology, which has been dominated by polymer membranes. Recently, the inorganic membrane has been undergoing rapid development and innovation. Inorganic membranes have the advantage of resisting harsh chemical cleaning, high temperature and wear resistance, high chemical stability, long lifetime, and autoclavable. All of these outstanding properties made inorganic membranes good candidates to be used for water treatment and desalination applications. This paper is a state of the art review on the synthesis, development, and application of different inorganic membranes for water and wastewater treatment. The inorganic membranes reviewed in this paper include liquid membranes, dynamic membranes, various ceramic membranes, carbon based membranes, silica membranes, and zeolite membranes. A brief description of the different synthesis routes for the development of inorganic membranes for application in water industry is given and each synthesis rout is critically reviewed and compared. Thereafter, the recent studies on different application of inorganic membrane and their properties for water treatment and desalination in literature are critically summarized. It was reported that inorganic membranes despite their high synthesis cost, showed very promising results with high flux, full salt rejection, and very low or no fouling.
Inorganic Membranes: Preparation and Application for Water Treatment and Desalination
McKay, Gordon; Buekenhoudt, Anita; Motmans, Filip; Khraisheh, Marwan; Atieh, Muataz
2018-01-01
Inorganic membrane science and technology is an attractive field of membrane separation technology, which has been dominated by polymer membranes. Recently, the inorganic membrane has been undergoing rapid development and innovation. Inorganic membranes have the advantage of resisting harsh chemical cleaning, high temperature and wear resistance, high chemical stability, long lifetime, and autoclavable. All of these outstanding properties made inorganic membranes good candidates to be used for water treatment and desalination applications. This paper is a state of the art review on the synthesis, development, and application of different inorganic membranes for water and wastewater treatment. The inorganic membranes reviewed in this paper include liquid membranes, dynamic membranes, various ceramic membranes, carbon based membranes, silica membranes, and zeolite membranes. A brief description of the different synthesis routes for the development of inorganic membranes for application in water industry is given and each synthesis rout is critically reviewed and compared. Thereafter, the recent studies on different application of inorganic membrane and their properties for water treatment and desalination in literature are critically summarized. It was reported that inorganic membranes despite their high synthesis cost, showed very promising results with high flux, full salt rejection, and very low or no fouling. PMID:29304024
Setting research priorities for Type 1 diabetes.
Gadsby, R; Snow, R; Daly, A C; Crowe, S; Matyka, K; Hall, B; Petrie, J
2012-10-01
Research priorities are often set by academic researchers or the pharmaceutical industry. The interests of patients, carers and clinicians may therefore be overlooked and research questions that matter may be neglected. The aims of this study were to collect uncertainties about the treatment of Type 1 diabetes from patients, carers and health professionals, and to collate and prioritize these uncertainties to develop a top 10 list of research priorities, using a structured priority-setting partnership of patients, carers, health professionals and diabetes organizations, as described by the James Lind Alliance. A partnership of interested organizations was set up, and from this a steering committee of 10 individuals was formed. An online and paper survey was used to identify uncertainties. These were collated, and the steering group carried out an interim priority-setting exercise with partner organizations. This group of uncertainties was then voted on to give a smaller list that went forward to the final priority-setting workshop. At this meeting, a final list of the top 10 research priorities was agreed. An initial 1141 uncertainties were described. These were reduced to 88 indicative questions, 47 of which went out for voting. Twenty-four were then taken forward to a final priority-setting workshop. This workshop resulted in a list of top 10 research priorities in Type 1 diabetes. We have shown that it is possible using the James Lind Alliance process to develop an agreed top 10 list of research priorities for Type 1 diabetes from health professionals, patients and carers. © 2012 The Authors. Diabetic Medicine © 2012 Diabetes UK.
Analysis of Critical Earth Observation Priorities for Societal Benefit
Zell, E. R.; Huff, A. K.; Carpenter, A. T.; Friedl, L.
2011-12-01
moisture content, burn scars, and meteorological parameters. Impacts to public health and livelihoods due to food insecurity, algal blooms, and air pollution can be addressed through NRT monitoring of specific events utilizing land cover, atmospheric composition, water quality, and meteorological observations. More broadly, the assessment of water availability for drinking and agriculture and the development of floods and storms rely on continuous feeds of NRT meteorological and atmospheric composition observations. Overall, this multi-disciplinary study of user needs for NRT data and products can inform the design and operation of NRT data systems. Follow-on work for this study will also be presented, focusing on the availability of current and future satellite measurements (including NRT) of the 30 most critical Earth observation priorities, as well as a detailed analysis of users' needs for precipitation data. The results of this study summarize the priorities for critical Earth observations utilized globally for societal benefit.
Zhu, W.; Cheng, Z.; Lou, S.
2017-12-01
Despite of extensive efforts into characterization of the sources in severe haze pollution periods in the megacity of Shanghai, the study of aerosol composition, mass-size distribution and optical properties to PM1 in the pollution periods remain poorly understood. Here we conducted a 47days real-time measurement of submicron aerosol (PM1) composition and size distribution by a High-Resolution Time-of-Flight Aerosol Mass spectrometer (HR-TOF-AMS), particle light scattering by a Cavity Attenuated Phase Shift ALBedo monitor (CAPS-ALB) and Photoacoustic Extinctionmeter (PAX) in Shanghai, China, from November 28, 2016 to January 12, 2017. The average PM1 concentration was 85.9(±14.7) μg/m3 during the pollution period, which was nearly 4 times higher than that of clean period. Increased scattering coefficient during EP was associated with higher secondary inorganic aerosols and organics. We also observed organics mass size distribution for different pollution extents showing different distribution characteristics. There were no obvious differences for ammonium nitrate and ammonium sulfate among the pollution periods, which represented single peak distributions, and peaks ranged at 650-700nm and 700nm, respectively. A strong relationship can be expected between PM1 compounds mass concentration size distribution and scattering coefficient, suggesting that chemical composition, size distribution of the particles and their variations could also contribute to the extinction coefficients. Organics and secondary inorganic species to particle light scattering were quantified. The results showed that organics and ammonium nitrate were the largest contribution to scattering coefficients of PM1. The contribution of (NH4)2SO4 to the light scattering exceeded that of NH4NO3 during clean period due to the enhanced sulfate concentrations. Our results elucidate substantial changes of aerosol composition, formation mechanisms, size distribution and optical properties due to local
Uptake of inorganic contaminants by pteridophytes
International Nuclear Information System (INIS)
Zheng Jiemin; Chen Ziyuan; Tang Shirong; Guangzhou Univ., Guangzhou; Ding Bingyang
2005-01-01
The review covers results at home and abroad in terms of uptake of inorganic contaminants by pteridophytes, and suggests pteridophytes' significance in phytoremediation; the mechanisms related to uptake of inorganic contaminants by pteridophytes and some methods and means used for research on the mechanism are also introduced; the authors' viewpoints on future development trends are presented in this paper. (authors)
Balancing development, energy and climate priorities in China. Current status and the way ahead
International Nuclear Information System (INIS)
Kejun Jiang; Xiulian Hu; Xianli Zhu; Garg, A.; Halsnaes, K.; Qiang Liu
2007-09-01
This report is the China Country Report of the project: Projecting future energy demand: Balancing development, energy and climate priorities in large developing economies. Under this project four country studies have been carried out, on China, India, Brazil, and South Africa respectively. The focus of this report is on the energy sector policies that mainstream climate interests within development choices. The report gives a short introduction to the project and its approach, followed by analyses of Chinese energy, development and climate change and an assessment of cross-country results that gives a range of key indicators of the relationship between economic growth, energy, and local and global pollutants. (BA)
Setting Priorities Personal Values, Organizational Results
(CCL), Center for Creative Leadership
2011-01-01
To be a successful leader, you need to get results. To get results, you need to set priorities. This book can help you do a better job of setting priorities, recognizing the personal values that motivate your decision making, the probable trade-offs and consequences of your decisions, and the importance of aligning your priorities with your organization's expectations. In this way you can successfully meet organizational objectives and consistently produce results.
Thompson, N. A.; Ruck, H. W.
1984-04-01
The Air Force is interested in identifying potentially hazardous tasks and prevention of accidents. This effort proposes four methods for determining safety training priorities for job tasks in three enlisted specialties. These methods can be used to design training aimed at avoiding loss of people, time, materials, and money associated with on-the-job accidents. Job tasks performed by airmen were measured using task and job factor ratings. Combining accident reports and job inventories, subject-matter experts identified tasks associated with accidents over a 3-year period. Applying correlational, multiple regression, and cost-benefit analysis, four methods were developed for ordering hazardous tasks to determine safety training priorities.
2010-01-01
... management problems. (j) Cash or in kind support of project from non-federal sources. (k) Ability to... program. (a) Projects proposing to give priority for available services to rural communities having a population less than 5,500 and/or below 2,500. (b) Projects proposing to give priority for available services...
Ultrasound exfoliation of inorganic analogues of graphene
Czech Academy of Sciences Publication Activity Database
Štengl, Václav; Henych, Jiří; Slušná, Michaela; Ecorchard, Petra
2014-01-01
Roč. 9, APR (2014), s. 1-14 ISSN 1556-276X R&D Projects: GA ČR(CZ) GA14-05146S Institutional support: RVO:61388980 Keywords : Ultrasound * Exfoliation * Graphene inorganic analogues Subject RIV: CA - Inorganic Chemistry Impact factor: 2.779, year: 2014
40 CFR 35.925-3 - Priority determination.
2010-07-01
... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Priority determination. 35.925-3 Section 35.925-3 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GRANTS AND OTHER FEDERAL... Priority determination. That such works are entitled to priority in accordance with § 35.915, and that the...
Computer-Assisted Inverse Design of Inorganic Electrides
Directory of Open Access Journals (Sweden)
Yunwei Zhang
2017-02-01
Full Text Available Electrides are intrinsic electron-rich materials enabling applications as excellent electron emitters, superior catalysts, and strong reducing agents. There are a number of organic electrides; however, their instability at room temperature and sensitivity to moisture are bottlenecks for their practical uses. Known inorganic electrides are rare, but they appear to have greater thermal stability at ambient conditions and are thus better characterized for application. Here, we develop a computer-assisted inverse-design method for searching for a large variety of inorganic electrides unbiased by any known electride structures. It uses the intrinsic property of interstitial electron localization of electrides as the global variable function for swarm intelligence structure searches. We construct two rules of thumb on the design of inorganic electrides pointing to electron-rich ionic systems and low electronegativity of the cationic elements involved. By screening 99 such binary compounds through large-scale computer simulations, we identify 24 stable and 65 metastable new inorganic electrides that show distinct three-, two-, and zero-dimensional conductive properties, among which 18 are existing compounds that have not been pointed to as electrides. Our work reveals the rich abundance of inorganic electrides by providing 33 hitherto unexpected structure prototypes of electrides, of which 19 are not in the known structure databases.
Decentralized health care priority-setting in Tanzania
DEFF Research Database (Denmark)
Maluka, Stephen; Kamuzora, Peter; Sebastiån, Miguel San
2010-01-01
Priority-setting has become one of the biggest challenges faced by health decision-makers worldwide. Fairness is a key goal of priority-setting and Accountability for Reasonableness has emerged as a guiding framework for fair priority-setting. This paper describes the processes of setting health...... care priorities in Mbarali district, Tanzania, and evaluates the descriptions against Accountability for Reasonableness. Key informant interviews were conducted with district health managers, local government officials and other stakeholders using a semi-structured interview guide. Relevant documents...... no formal mechanisms in place to ensure that this information reached the public. There were neither formal mechanisms for challenging decisions nor an adequate enforcement mechanism to ensure that decisions were made in a fair and equitable manner. Therefore, priority-setting in Mbarali district did...
Polyacrylamide-based inorganic hybrid flocculants with self-degradable property
Energy Technology Data Exchange (ETDEWEB)
Wei, Xinfang [Materials and Metallurgical College, Northeastern University, Shenyang 110819 (China); Hebei Provincial Laboratory for Dielectric and Electrolyte Materials, Northeastern University at Qinhuangdao, Qinhuangdao 066004 (China); Tao, Junshi; Li, Mingzhi; Zhu, Bishan; Li, Xuan; Ma, Zhiyu; Zhao, Tingjie; Wang, Bingzhu; Suo, Biao [Hebei Provincial Laboratory for Dielectric and Electrolyte Materials, Northeastern University at Qinhuangdao, Qinhuangdao 066004 (China); Wang, Haiwang, E-mail: whwdbdx@126.com [Materials and Metallurgical College, Northeastern University, Shenyang 110819 (China); State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao 066004 (China); Hebei Provincial Laboratory for Dielectric and Electrolyte Materials, Northeastern University at Qinhuangdao, Qinhuangdao 066004 (China); Yang, Jun, E-mail: jyang@ipe.ac.cn [State Key Laboratory of Multiphase Complex Systems, Institute of Process Engineering, Chinese Academy of Sciences, Beijing 100190 (China); Ye, Li, E-mail: yeli@iccas.ac.cn [Beijing National Laboratory for Molecular Sciences, Institute of Chemistry Chinese Academy of Sciences, Beijing 100190 (China); Qi, Xiwei, E-mail: qxw@mail.neuq.edu.cn [Materials and Metallurgical College, Northeastern University, Shenyang 110819 (China); Hebei Provincial Laboratory for Dielectric and Electrolyte Materials, Northeastern University at Qinhuangdao, Qinhuangdao 066004 (China)
2017-05-01
Polyacrylamide (PAM)-based inorganic hybrid materials are of great potential as flocculants in soil-liquid separation. Herein, we reported the design of inorganic soil-TiO{sub 2}-PAM hybrid materials using a unique process, which involved coating of titanium dioxide (TiO{sub 2}) nanoparticles on the surface of inorganic soils and subsequent polymerization of acrylamide (AM) on these nanoparticles under visible light. Inorganic soils including kaolin, bentonite, montmorillonite and diatomaceous earth were used to control the volume and to reduce the cost, and the TiO{sub 2} nanoparticles accelerated PAM degradation. The nanoparticles initiated AM polymerization directly under visible light, thus providing a facile strategy for the synthesis of new organic-inorganic hybrid flocculants. The obtained hybrid materials were characterized using Fourier transform infrared spectroscopy and transmission electron microscopy. The degradation of PAM initiated by UV irradiation exceeded 24% in 2 h, depending on its initial concentration. - Highlights: • A new polyacrylamide (PAM)-based inorganic hybrid flocculants with self-degradable property was developed. • TiO{sub 2} nanoparticles show a unique surface-initiated property under the condition of visible light. • We designed a facile strategy for the synthesis of inorganic soil@TiO{sub 2}@PAM hybrid materials.
7 CFR 632.12 - Funding priorities.
2010-01-01
... AGRICULTURE LONG TERM CONTRACTING RURAL ABANDONED MINE PROGRAM Qualifications § 632.12 Funding priorities. (a... extreme danger. (3) Priority 3. Restoration of the land and water resources and the environment where...
Huang, Ying-Ying; Mu, Yang-Xiu; He, Chun-Tao; Fu, Hui-Ling; Wang, Xue-Song; Gong, Fei-Yue; Yang, Zhong-Yi
2018-04-01
Breeding for pollution-safe cultivars (PSCs) can reduce pollutant accumulation in crops. However, the PSC breeding would face the risk of nutritional quality reduction, which is usually ignored in conventional breeding programs targeting to increase crop yield or nutritional quality. Thus, the doubt whether the risk would exist has to be clarified for supporting the PSC breeding. In the present study, a newly bred Cd/Pb-PSC of water spinach (Ipomoea aquatic Forsk.) and its parents (QLQ with low-Cd/Pb accumulation ability and T308 with high yield) of water spinach were employed to clarify the above-mentioned issue. Yields, and concentrations of Cd, Pb, nitrite, and organic and inorganic nutrients in shoots of the three experimental lines were determined. There were no significant differences in Cd/Pb concentration between the new PSC and QLQ, in nitrite content between the new PSC and its two parents and in yield between the new PSC and T308. It is decisively significant that shoot concentrations of organic and inorganic nutrients in the Cd/Pb-PSC were as high as those in one of its parents. It is affirmed that the breeding operations (crossing and consequently continuous selfing) for lowering Cd/Pb accumulation capacity of water spinach would not lower the nutritional values of the obtained Cd/Pb-PSCs from the breeding, which should be a pillar that supports the feasibility to minimize Cd/Pb pollution in vegetables using PSC-breeding method.
Pollution prevention and waste minimization opportunity assessment in environmental restoration
International Nuclear Information System (INIS)
Roybal, J.A.; Willison, C.P.
1997-01-01
The Environmental Restoration (ER) Project at Sandia National Laboratories implicitly subscribed to the philosophy of pollution prevention and waste minimization. As a result of a Department of Energy (DOE) offer, Pollution Prevention Opportunity Assessments (PPOA) were conducted at two ER sites and a decontamination and Demolition (D and D) site. The purpose of one of the PPOAs was to identify pollution prevention (P2) opportunities during environmental remediation at the Classified Waste Landfill located at Sandia National Laboratories, New Mexico (SNL/NM). The remediation activities at this site are scheduled to begin in the fall of 1997. The PPOA included presentations by the team members, a tour of the site, and a brainstorming session to list the waste streams, identify P2 opportunities and rank them in order of priority. Twenty-five P2 opportunities were identified during the brainstorming session of which twenty-two opportunities were selected for further investigation. Those twenty-two opportunities are discussed in this paper. A cost benefit analysis was performed for each P2 opportunity based on the estimated waste volume, feasibility, and cost. Pollution Prevention by Design (P2D) was incorporated into the PPOA to introduce waste minimization techniques that can be used during the planning phase of restoration projects
14 CFR 250.3 - Boarding priority rules.
2010-01-01
... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Boarding priority rules. 250.3 Section 250...) ECONOMIC REGULATIONS OVERSALES § 250.3 Boarding priority rules. (a) Every carrier shall establish priority... boarding on an oversold flight in the event that an insufficient number of volunteers come forward. Such...
Energy Technology Data Exchange (ETDEWEB)
Falah, Mahroo [MacDiarmid Institute for Advanced Materials and Nanotechnology, School of Chemical and Physical Sciences, Victoria University of Wellington (New Zealand); MacKenzie, Kenneth J.D., E-mail: Kenneth.mackenzie@vuw.ac.nz [MacDiarmid Institute for Advanced Materials and Nanotechnology, School of Chemical and Physical Sciences, Victoria University of Wellington (New Zealand); Knibbe, Ruth [Robinson Research Institute, Victoria University of Wellington (New Zealand); Page, Samuel J.; Hanna, John V. [Department of Physics, Warwick University, Coventry CV4 7AL (United Kingdom)
2016-11-15
Highlights: • Synthesis reported of new photoactive nano-oxide composites in a geopolymer matrix. • The novel aluminosilicate matrix is expanded with cetyltrimethylammonium bromide. • The photoactive component consists of a Cu(I) oxide and titania heterostructure. • Composites remove the model pollutant by both adsorption and photodegradation. • These new photocatalysts are extremely efficient and ecologically friendly. - Abstract: New photoactive composites to efficiently remove organic dyes from water are reported. These consist of Cu{sub 2}O/TiO{sub 2} nanoparticles in a novel inorganic geopolymer matrix modified by a large tertiary ammonium species (cetyltrimethylammonium bromide, CTAB) whose presence in the matrix is demonstrated by FTIR spectroscopy. The CTAB does not disrupt the tetrahedral geopolymer structural silica and alumina units as demonstrated by {sup 29}Si and {sup 27}Al MAS NMR spectroscopy. SEM/EDS, TEM and BET measurements suggest that the Cu{sub 2}O/TiO{sub 2} nanoparticles are homogenously distributed on the surface and within the geopolymer pores. The mechanism of removal of methylene blue (MB) dye from solution consists of a combination of adsorption (under dark conditions) and photodegradation (under UV radiation). MB adsorption in the dark follows pseudo second-order kinetics and is described by Freundlich-Langmuir type isotherms. The performance of the CTAB-modified geopolymer based composites is superior to composites based on unmodified geopolymer hosts, the most effective composite containing 5 wt% Cu{sub 2}O/TiO{sub 2} in a CTAB-modified geopolymer host. These composites constitute a new class of materials with excellent potential in environmental protection applications.
Lin, Xiaoqing; Li, Xiaodong; Lu, Shengyong; Wang, Fei; Chen, Tong; Yan, Jianhua
2015-10-01
Flocculants are widely used to improve the properties of sludge dewatering in industrial wastewater treatment. However, there have been no studies conducted on the influence of flocculants on the formation of polychlorinated dibenzo-p-dioxin and dibenzofurans (PCDD/Fs) during sewage sludge incineration. This paper selected three typical kinds of flocculants, including polyacrylamide (PAM), poly-ferric chloride (PFC), and polyaluminum chloride (PAC) flocculant, to study their influences on the formation of PCDD/Fs during sewage sludge incineration. The results indicated that PAM flocculant, which is an organic flocculant, inhibited the formation of PCDD/Fs in sewage sludge incineration, while inorganic flocculant, such as PFC and PAC flocculant, promoted the formation. The most probable explanation is that the amino content in the PAM flocculant acted as an inhibitor in the formation of PCDD/Fs, while the chlorine content, especially the metal catalyst in the PFC and PAC flocculants, increased the formation rate. The addition of flocculants nearly did not change the distribution of PCDD/F homologues. The PCDFs contributed the most toxic equivalent (TEQ) value, especially 2, 3, 4, 7, 8-PeCDF. Therefore, the use of inorganic flocculants in industrial wastewater treatment should be further assessed and possibly needs to be strictly regulated if the sludge is incinerated. From this aspect, a priority to the use of organic flocculants should be given.
15 CFR 700.15 - Extension of priority ratings.
2010-01-01
...) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE NATIONAL SECURITY INDUSTRIAL BASE REGULATIONS DEFENSE PRIORITIES AND ALLOCATIONS SYSTEM Industrial Priorities § 700.15 Extension of priority ratings. (a...
Consumer design priorities for upper limb prosthetics.
Biddiss, Elaine; Beaton, Dorcas; Chau, Tom
2007-11-01
To measure consumer satisfaction with upper limb prosthetics and provide an enumerated list of design priorities for future developments. A self-administered, anonymous survey collected information on participant demographics, history of and goals for prosthesis use, satisfaction, and design priorities. The questionnaire was available online and in paper format and was distributed through healthcare providers, community support groups, and one prosthesis manufacturer; 242 participants of all ages and levels of upper limb absence completed the survey. Rates of rejection for myoelectric hands, passive hands, and body-powered hooks were 39%, 53%, and 50%, respectively. Prosthesis wearers were generally satisfied with their devices while prosthesis rejecters were dissatisfied. Reduced prosthesis weight emerged as the highest priority design concern of consumers. Lower cost ranked within the top five design priorities for adult wearers of all device types. Life-like appearance is a priority for passive/cosmetic prostheses, while improved harness comfort, wrist movement, grip control and strength are required for body-powered devices. Glove durability, lack of sensory feedback, and poor dexterity were also identified as design priorities for electric devices. Design priorities reflect consumer goals for prosthesis use and vary depending on the type of prosthesis used and age. Future design efforts should focus on the development of more light-weight, comfortable prostheses.
Preparation of inorganic hydrophobic catalysts
International Nuclear Information System (INIS)
Yang, Yong; Wang, Heyi; Du, Yang
2009-04-01
In order to catalyse the oxidation of tritium gas, two inorganic hydrophobic catalysts are prepared. Under room temperature, the catalysed oxidation ratio of 0.3%-1% (V/V) hydrogen gas in air is higher than 95%. Pt-II inorganic hydrophobic catalysts has obviously better catalysing ability than Pt-PTFE and lower ability than Pt-SDB in H 2 -HTO isotopic exchange, because the pressure resistence of Pt-II is much higher than Pt-SDB, it can be used to the CECE cell of heavy water detritium system. (authors)
Knight, Simon R; Metcalfe, Leanne; O'Donoghue, Katriona; Ball, Simon T; Beale, Angela; Beale, William; Hilton, Rachel; Hodkinson, Keith; Lipkin, Graham W; Loud, Fiona; Marson, Lorna P; Morris, Peter J
2016-01-01
It has been suggested that the research priorities of those funding and performing research in transplantation may differ from those of end service users such as patients, carers and healthcare professionals involved in day-to-day care. The Kidney Transplant Priority Setting Partnership (PSP) was established with the aim of involving all stakeholders in prioritising future research in the field. The PSP methodology is as outlined by the James Lind Alliance. An initial survey collected unanswered research questions from patients, carers and clinicians. Duplicate and out-of-scope topics were excluded and the existing literature searched to identify topics answered by current evidence. An interim prioritisation survey asked patients and professionals to score the importance of the remaining questions to create a ranked long-list. These were considered at a final consensus workshop using a modified nominal group technique to agree a final top ten. The initial survey identified 497 questions from 183 respondents, covering all aspects of transplantation from assessment through to long-term follow-up. These were grouped into 90 unanswered "indicative" questions. The interim prioritisation survey received 256 responses (34.8% patients/carers, 10.9% donors and 54.3% professionals), resulting in a ranked list of 25 questions that were considered during the final workshop. Participants agreed a top ten priorities for future research that included optimisation of immunosuppression (improved monitoring, choice of regimen, personalisation), prevention of sensitisation and transplanting the sensitised patient, management of antibody-mediated rejection, long-term risks to live donors, methods of organ preservation, induction of tolerance and bioengineering of organs. There was evidence that patient and carer involvement had a significant impact on shaping the final priorities. The final list of priorities relates to all stages of the transplant process, including access to
Particulate matter pollution over a Mediterranean urban area.
Pateraki, St; Assimakopoulos, V D; Maggos, Th; Fameli, K M; Kotroni, V; Vasilakos, Ch
2013-10-01
The main purpose of this study is to investigate the aerosols' (PM10, PM2.5, and PM1) spatial and temporal distribution in different types of environment in a Mediterranean urban region, the Greater Athens Area based on data from a sampling campaign that took place during the cold and warm period of 2008. The influence of the atmospheric circulation patterns, the possible local transport mechanisms, as well as the differentiation of the PM behaviour from that of the inorganic pollutants (NOx, O3), are analysed and discussed. Furthermore, the Comprehensive Air Quality Model with extensions (CAMx) was applied for selected sampling dates and its results were evaluated against measurements in order to interpret qualitatively the configured picture of the air pollution above the GAA. Analysis of the measurement data show that local sources such as traffic and industry dominate over the prevailing PM loads, especially at the 'hot spot' areas. Moreover, the synoptic circulation patterns associated with calm conditions and southerly flows lead to high particulate pollution levels that also affect the urban background stations. Saharan dust outbreaks appeared to increase the particles' diameter as well as the number of E.U. limit value exceedances within the stations of our network. Without any dependence on the characteristics of the investigated atmosphere, PM1 always constituted the greatest part of the PM2.5 mass while PM10, especially during the Saharan dust episodes, was mainly constituted by the coarse fraction. The numerical modelling approach of the geographical distribution of PM10, PM2.5, NOx and O3 justified the design of the sampling campaign, indicating the need for the systematic and parallel monitoring and modelling of the pollutants' dispersion in order to understand the particulate pollution problem in the GAA and to aid to the formulation of pollution control strategies. Copyright © 2013 Elsevier B.V. All rights reserved.
2013-06-11
The Assistant Secretary for Special Education and Rehabilitative Services announces priorities under the Disability and Rehabilitation Research Projects and Centers Program administered by the National Institute on Disability and Rehabilitation Research (NIDRR). Specifically, we announce priorities for a Rehabilitation Engineering Research Center (RERC) on Rehabilitation Strategies, Techniques, and Interventions (Priority 1), Information and Communication Technologies Access (Priority 2), Individual Mobility and Manipulation (Priority 3), and Physical Access and Transportation (Priority 4). The Assistant Secretary may use one or more of these priorities for competitions in fiscal year (FY) 2013 and later years. We take this action to focus research attention on areas of national need. We intend these priorities to improve community living and participation, health and function, and employment outcomes of individuals with disabilities.
Air pollutants and the cuticle: implications for plant physiology
International Nuclear Information System (INIS)
Riederer, M.; Jetter, R.; Markstaedter, C.; Schreiber, L.
1994-01-01
The physiologically most important function of the plant cuticle is to control the loss of water and of inorganic and organic constituents of plants via the surfaces of leaves and fruits. In a polluted environment, the cuticle may also affect the rates of uptake of extraneous chemicals. It will be shown how the essential transport properties of plant cuticles can be determined experimentally using intact leaves, isolated cuticles, and reconstituted cuticular waxes. The transport properties will be related to the physico-chemical properties of the permeants in order to achieve a general description of pollutant transport across the leaf/atmosphere interface and to assess the relative contributions of the cuticular and the stomatal pathways to the total flow rate. The correlation of the transport properties of cuticles with their chemical composition will be discussed and a model of the molecular structure of the transport-limiting barrier of the cuticle and of epicuticular waxes be presented. The effects of chemicals of anthropogenic and biogenic origin on cuticular permeability will be described quantitatively. (orig.)
Impact of air pollution on health in Europe
Energy Technology Data Exchange (ETDEWEB)
Kruzyzanowski, M. [WHO European Centre for Environment and Health, Bilthoven (Netherlands)
1995-12-31
Assessment of health risks due to air pollution should be an important indicator for setting the priorities for the environmental policies and for the abatement of the pollution. The scale of such assessment depends on the level, and scope, of the policy decisions relying on the evaluation. The analysis may range from an estimate of the health impact of a single pollution source, through the risk assessment in a community or a region of a country, to an international, or pan-continental approach. Such assessment, addressing population of all Europe, was one of the aims of the project `Concern for Europe`s Tomorrow` (CET). The WHO European Centre for Environment and Health completed this project, and the corresponding report, as a contribution to the Second European Conference on Environment and Health which gathered ministries of health and of environment from all European countries in Helsinki in June 1994. Using the report as the background information, the ministries have endorsed the `Environmental Health Action Plan for Europe`, the document formulating common environmental health policy of the Region. In this article, the summary of the evaluation will be presented and the main constraints of the pan-European approach will be addressed. (author)
Impact of air pollution on health in Europe
Energy Technology Data Exchange (ETDEWEB)
Kruzyzanowski, M [WHO European Centre for Environment and Health, Bilthoven (Netherlands)
1996-12-31
Assessment of health risks due to air pollution should be an important indicator for setting the priorities for the environmental policies and for the abatement of the pollution. The scale of such assessment depends on the level, and scope, of the policy decisions relying on the evaluation. The analysis may range from an estimate of the health impact of a single pollution source, through the risk assessment in a community or a region of a country, to an international, or pan-continental approach. Such assessment, addressing population of all Europe, was one of the aims of the project `Concern for Europe`s Tomorrow` (CET). The WHO European Centre for Environment and Health completed this project, and the corresponding report, as a contribution to the Second European Conference on Environment and Health which gathered ministries of health and of environment from all European countries in Helsinki in June 1994. Using the report as the background information, the ministries have endorsed the `Environmental Health Action Plan for Europe`, the document formulating common environmental health policy of the Region. In this article, the summary of the evaluation will be presented and the main constraints of the pan-European approach will be addressed. (author)
Priority setting and health policy and systems research
Directory of Open Access Journals (Sweden)
Bennett Sara C
2009-12-01
Full Text Available Abstract Health policy and systems research (HPSR has been identified as critical to scaling-up interventions to achieve the millennium development goals, but research priority setting exercises often do not address HPSR well. This paper aims to (i assess current priority setting methods and the extent to which they adequately include HPSR and (ii draw lessons regarding how HPSR priority setting can be enhanced to promote relevant HPSR, and to strengthen developing country leadership of research agendas. Priority setting processes can be distinguished by the level at which they occur, their degree of comprehensiveness in terms of the topic addressed, the balance between technical versus interpretive approaches and the stakeholders involved. When HPSR is considered through technical, disease-driven priority setting processes it is systematically under-valued. More successful approaches for considering HPSR are typically nationally-driven, interpretive and engage a range of stakeholders. There is still a need however for better defined approaches to enable research funders to determine the relative weight to assign to disease specific research versus HPSR and other forms of cross-cutting health research. While country-level research priority setting is key, there is likely to be a continued need for the identification of global research priorities for HPSR. The paper argues that such global priorities can and should be driven by country level priorities.
DEFF Research Database (Denmark)
Grøntoft, Terje; Odlyha, Marianne; Mottner, P.
2010-01-01
from a synthetic polymer and the Resin Mastic coated Piezo electric Quartz Crystals (RM-PQC) respond to photo-oxidation and showed higher values outside than inside the mc-frames. Two other dosimeters, the Glass Slide Dosimeter (GSD) and the Lead coated Piezo electric Quartz Crystals (L-PQC) respond......Pollutants and their potential degradation of paintings have been measured for the first time in microclimate frames (mc-frames), which are used to protect paintings. The pollutants that were measured include both inorganic pollutants, which originate mainly from external sources, and organic...... samplers were used together with different types of dosimeters. Results show that the dosimeters respond to either the photo-oxidizing conditions or the level of volatile organic acids in the environments both in the museums and within the mc-frames. Two dosimeters, the Early Warning Organic (EWO) made...
Energy Technology Data Exchange (ETDEWEB)
Outola, I. (STUK-Radiation and Nuclear Safety Authority, Helsinki (Finland))
2009-06-15
To investigate how and to what extent industrial pollution affects the behaviour of radionuclides in forest ecosystems, studies were conducted in the vicinity of two Cu-Ni smelters: one in a pine forest at Harjavalta, Finland, and the other in a spruce forest at Monchegorsk, Russia. Industrial pollution had significant effects on the distribution of radionuclides in soil horizons. With the increase in pollution towards the smelter, radionuclides were accumulated more in the litter layer because the conversion of litter into organic material was diminished due to inhibited microbial activity. As a result, the organic layer contained less radionuclides towards the smelter. The effect of industrial pollution on soil-to-plant transfer was complex. The effect varied with radionuclide, plant species and also on forest type. For 137Cs, soil-to-plant transfer decreased significantly as industrial pollution increased in pine forest, whereas the decrease was less pronounced in spruce forest. Root uptake of 239,240Pu by plants is extremely small, and plant contamination by resuspended soil is an important factor in considering the soil-to-plant transfer of this radionuclide. In spruce forest, more plutonium was transferred into plants when pollution load increased due to resuspension of litter particles, which contained higher concentrations of plutonium in the vicinity of the smelter. Soil-to-plant transfer of plutonium was much less affected in pine forests contaminated with industrial pollution. This research clearly indicates the sensitivity of the northern forest ecosystem to inorganic pollutants. Prediction of the soil-to-plant transfer of radionuclides in industrially polluted forest ecosystems requires detailed information on the total deposition, vertical distribution of radionuclides in soil, soil microbiological factors, other soil parameters as well as the rooting depths of the plants. (LN)
Potential Sources and Formations of the PM2.5 Pollution in Urban Hangzhou
Directory of Open Access Journals (Sweden)
Jian Wu
2016-07-01
Full Text Available Continuous measurements of meteorological parameters, gaseous pollutants, particulate matters, and the major chemical species in PM2.5 were conducted in urban Hangzhou from 1 September to 30 November 2013 to study the potential sources and formations of PM2.5 pollution. The average PM2.5 concentration was 69 µg·m−3, ~97% higher than the annual concentration limit in the national ambient air quality standards (NAAQS of China. Relative humidity (RH and wind speed (WS were two important factors responsible for the increase of PM2.5 concentration, with the highest value observed under RH of 70%–90%. PM2.5 was in good correlation with both NO2 and CO, but not with SO2, and the potential source contribution function (PSCF results displayed that local emissions were important potential sources contributing to the elevated PM2.5 and NO2 in Hangzhou. Thus, local vehicle emission was suggested as a major contribution to the PM2.5 pollution. Concentrations of NO2 and CO significantly increased in pollution episodes, while the SO2 concentration even decreased, implying local emission rather than region transport was the major source contributing to the formation of pollution episodes. The sum of SO42−, NO3−, and NH4+ accounted for ~50% of PM2.5 in mass in pollution episodes and the NO3−/EC ratios were significantly elevated, revealing that the formation of secondary inorganic species, particularly NO3−, was an important contributor to the PM2.5 pollution in Hangzhou. This study highlights that controlling local pollution emissions was essential to reduce the PM2.5 pollution in Hangzhou, and the control of vehicle emission in particular should be further promoted in the future.
Global conservation priorities for marine turtles.
Directory of Open Access Journals (Sweden)
Bryan P Wallace
Full Text Available Where conservation resources are limited and conservation targets are diverse, robust yet flexible priority-setting frameworks are vital. Priority-setting is especially important for geographically widespread species with distinct populations subject to multiple threats that operate on different spatial and temporal scales. Marine turtles are widely distributed and exhibit intra-specific variations in population sizes and trends, as well as reproduction and morphology. However, current global extinction risk assessment frameworks do not assess conservation status of spatially and biologically distinct marine turtle Regional Management Units (RMUs, and thus do not capture variations in population trends, impacts of threats, or necessary conservation actions across individual populations. To address this issue, we developed a new assessment framework that allowed us to evaluate, compare and organize marine turtle RMUs according to status and threats criteria. Because conservation priorities can vary widely (i.e. from avoiding imminent extinction to maintaining long-term monitoring efforts we developed a "conservation priorities portfolio" system using categories of paired risk and threats scores for all RMUs (n = 58. We performed these assessments and rankings globally, by species, by ocean basin, and by recognized geopolitical bodies to identify patterns in risk, threats, and data gaps at different scales. This process resulted in characterization of risk and threats to all marine turtle RMUs, including identification of the world's 11 most endangered marine turtle RMUs based on highest risk and threats scores. This system also highlighted important gaps in available information that is crucial for accurate conservation assessments. Overall, this priority-setting framework can provide guidance for research and conservation priorities at multiple relevant scales, and should serve as a model for conservation status assessments and priority
Industrial inorganic chemistry. 2. rev. ed.
International Nuclear Information System (INIS)
Buechner, W.; Schliebs, R.; Winter, G.; Buechel, K.H.
1986-01-01
Inorganic chemistry is a branch of considerable economic and technical importance. Apart from supplying the market with metals, fertilizers, building materials, pigments and glass it is one of the major suppliers of process materials to the organic chemical industry. Many modern products of other industrial sectors (video tapes, optical fibers or silicon chips) could not have been developed and manufactured without the achievements of industrial inorganic chemistry. The publication is the first of its kind to give a compact description of the inorganic chemistry sector. A clearly arranged survey facilitates access to production processes, economic aspects, ecological implications, energy consumption and raw material consumption as well as to many other data and facts. Due to its clear arrangement and the combination of technical and economic facts the book is a valuable source of information. (orig./EF) [de
Inorganic and organic radiation chemistry: state and problems
International Nuclear Information System (INIS)
Kalyazin, E.P.; Bugaenko, L.T.
1990-01-01
Radiation inorganic and organic chemistry is presented on the basis of the general scheme and classification of radiolysis products and elementary processes, by which evolution of radiation-affected substances up to the final radiolysis products takes place. The evolution is traced for the representatives of inorganic and organic compounds. The contribution of radiation inorganic and organic chemistry to radiation technology, radiation materials technology, radiation ecology and medicine, is shown. Tendencies in the development of radiation chemistry and prediction of its certain directions are considered
Synthetic Strategies in the Preparation of Polymer/Inorganic Hybrid Nanoparticles
Hood, Matthew A.; Mari, Margherita; Muñoz-Espí, Rafael
2014-01-01
This article reviews the recent advances and challenges in the preparation of polymer/inorganic hybrid nanoparticles. We mainly focus on synthetic strategies, basing our classification on whether the inorganic and the polymer components have been formed in situ or ex situ, of the hybrid material. Accordingly, four types of strategies are identified and described, referring to recent examples: (i) ex situ formation of the components and subsequent attachment or integration, either by covalent or noncovalent bonding; (ii) in situ polymerization in the presence of ex situ formed inorganic nanoparticles; (iii) in situ precipitation of the inorganic components on or in polymer structures; and (iv) strategies in which both polymer and inorganic component are simultaneously formed in situ. PMID:28788665
Setting Research Priorities for Kidney Cancer.
Jones, Jennifer M; Bhatt, Jaimin; Avery, Jonathan; Laupacis, Andreas; Cowan, Katherine; Basappa, Naveen S; Basiuk, Joan; Canil, Christina; Al-Asaaed, Sohaib; Heng, Daniel Y C; Wood, Lori; Stacey, Dawn; Kollmannsberger, Christian; Jewett, Michael A S
2017-12-01
Defining disease-specific research priorities in cancer can facilitate better allocation of limited resources. Involving patients and caregivers as well as expert clinicians in this process is of value. We undertook this approach for kidney cancer as an example. The Kidney Cancer Research Network of Canada sponsored a collaborative consensus-based priority-setting partnership that identified ten research priorities in the management of kidney cancer. These are discussed in the context of current initiatives and gaps in knowledge. Copyright © 2017 European Association of Urology. Published by Elsevier B.V. All rights reserved.
Priority setting in clinical nursing practice: literature review.
Hendry, Charles; Walker, Anne
2004-08-01
Time is a valuable resource. When nurses experience demands on their services which exceed their available time, then 'rationing' must occur. In clinical practice such rationing requires practitioners to set priorities for care. The aim of this paper is establish what is currently known about priority setting in nursing, including how nurses set priorities and what factors influence this. CINAHL, Medline, ASSIA, and PsychLit databases for the years 1982-2002 were searched, using the terms (clinical decision-making or problem-solving or planning) and (setting priorities or prioriti*). The publications found were used in a selective, descriptive review. Priority setting is an important skill in nursing, and a skill deficit can have serious consequences for patients. Recent studies have suggested that it is a difficult skill for newly qualified nurses to acquire and may not be given sufficient attention in nurse education. Priority setting can be defined as the ordering of nursing problems using notions of urgency and/or importance, in order to establish a preferential order for nursing actions. A number of factors that may impact on priority setting have been identified in the literature. These include: the expertise of the nurse; the patient's condition; the availability of resources; ward organization; philosophies and models of care; the nurse-patient relationship; and the cognitive strategy used by the nurse to set priorities. However, very little empirical work has been conducted in this area. Further study of priority setting in a range of clinical practice settings is necessary. This could inform both practice and education, promote better use of limited resources and maximize patient outcomes.
Organometallic-inorganic hybrid electrodes for lithium-ion batteries
Huang, Qian; Lemmon, John P.; Choi, Daiwon; Cosimbescu, Lelia
2016-09-13
Disclosed are embodiments of active materials for organometallic and organometallic-inorganic hybrid electrodes and particularly active materials for organometallic and organometallic-inorganic hybrid cathodes for lithium-ion batteries. In certain embodiments the organometallic material comprises a ferrocene polymer.
Investigations of inorganic and hybrid inorganic-organic nanostructures
Kam, Kinson Chihang
This thesis focuses on the exploratory synthesis and characterization of inorganic and hybrid inorganic-organic nanomaterials. In particular, nanostructures of semiconducting nitrides and oxides, and hybrid systems of nanowire-polymer composites and framework materials, are investigated. These materials are characterized by a variety of techniques for structure, composition, morphology, surface area, optical properties, and electrical properties. In the study of inorganic nanomaterials, gallium nitride (GaN), indium oxide (In2O3), and vanadium dioxide (VO2) nanostructures were synthesized using different strategies and their physical properties were examined. GaN nanostructures were obtained from various synthetic routes. Solid-state ammonolysis of metastable gamma-Ga2O 3 nanoparticles was found to be particularly successful; they achieved high surface areas and photoluminescent study showed a blue shift in emission as a result of surface and size defects. Similarly, In2O3 nanostructures were obtained by carbon-assisted solid-state syntheses. The sub-oxidic species, which are generated via a self-catalyzed vapor-liquid-solid mechanism, resulted in 1D nanostructures including nanowires, nanotrees, and nanobouquets upon oxidation. On the other hand, hydrothermal methods were used to obtain VO2 nanorods. After post-thermal treatment, infrared spectroscopy demonstrated that these nanorods exhibit a thermochromic transition with temperature that is higher by ˜10°C compared to the parent material. The thermochromic behavior indicated a semiconductor-to-metal transition associated with a structural transformation from monoclinic to rutile. The hybrid systems, on the other hand, enabled their properties to be tunable. In nanowire-polymer composites, zinc oxide (ZnO) and silver (Ag) nanowires were synthesized and incorporated into polyaniline (PANI) and polypyrrole (PPy) via in-situ and ex-situ polymerization method. The electrical properties of these composites are
Spatial Regression and Prediction of Water Quality in a Watershed with Complex Pollution Sources.
Yang, Xiaoying; Liu, Qun; Luo, Xingzhang; Zheng, Zheng
2017-08-16
Fast economic development, burgeoning population growth, and rapid urbanization have led to complex pollution sources contributing to water quality deterioration simultaneously in many developing countries including China. This paper explored the use of spatial regression to evaluate the impacts of watershed characteristics on ambient total nitrogen (TN) concentration in a heavily polluted watershed and make predictions across the region. Regression results have confirmed the substantial impact on TN concentration by a variety of point and non-point pollution sources. In addition, spatial regression has yielded better performance than ordinary regression in predicting TN concentrations. Due to its best performance in cross-validation, the river distance based spatial regression model was used to predict TN concentrations across the watershed. The prediction results have revealed a distinct pattern in the spatial distribution of TN concentrations and identified three critical sub-regions in priority for reducing TN loads. Our study results have indicated that spatial regression could potentially serve as an effective tool to facilitate water pollution control in watersheds under diverse physical and socio-economical conditions.
International Nuclear Information System (INIS)
Bode, P.
1993-01-01
Many plastic products have relatively short life cycles. Upon final destruction, inorganic additives used for pigmentation, as polymer stabilizer or as flame retarding agent are being released to the environment. In a rapidly increasing way governmental authorities are setting limits to the use of inorganic additives, in particular cadmium, in plastics. INAA has attractive characteristics which may make authorities decide to select it for the control programs in relation to the enforcement of pollution standards. An evaluation is made of the use of INAA for such analysis; analysis protocols, sensitivities, and observed levels of other trace elements are being discussed. (author) 2 refs.; 2 tabs
Fuerhacker, Maria
2009-08-01
place as the main European legislation to protect our water resources and the water environment of Europe since 2000. It requires managing river basins so that the quality and quantity of water does not affect the ecological services of any specific water body. Nevertheless, the goals of other directives as for drinking water, bathing water and urban wastewater treatment are not yet harmonised mainly concerning microbiological, priority substances and priority hazardous substances (PS/PHS) contamination. Following the detection of substances, a risk assessment with sound effect data needs to be performed also for regulatory decisions and priorisation of measures to remove emerging contaminants. Beside personal care products and industrial contaminants, faecal pollution of recreational waters is one of the major hazards facing users, although microbial contamination from other sources as well as chemical and physical aspects also affects the suitability of water for recreation. As in arid and semiarid areas, wastewater is considered for irrigation with regulatory needs of hygienic and chemical parameters-health-based targets-to avoid the contamination of crops and food. In surface waters, currently, the relationships between physical and chemical properties and the biological state of surface waters were quite well-understood to enable the management of catchments and rivers to achieve ecological quality. Nevertheless, more work is needed to find out the actual impact of the regulations for single chemicals and complex mixtures, in terms of environmental quality standards to achieve a 'good chemical status', on the good biological status. In a next step after the adoption of the list of PS/PHS substances, which also includes the POPs, the Urban Wastewater Treatment Directive (UWWTD) needs to be adjusted and existing or new treatment options (BATs) should comply with the new requirements of the different directives. Relevant substances threaten human health and the
40 CFR 146.9 - Criteria for establishing permitting priorities.
2010-07-01
....9 Criteria for establishing permitting priorities. In determining priorities for setting times for... priorities. 146.9 Section 146.9 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) WATER... (a), (c), (g) or § 144.22(f), the Director shall base these priorities upon consideration of the...
Sol-gel processing with inorganic metal salt precursors
Hu, Zhong-Cheng
2004-10-19
Methods for sol-gel processing that generally involve mixing together an inorganic metal salt, water, and a water miscible alcohol or other organic solvent, at room temperature with a macromolecular dispersant material, such as hydroxypropyl cellulose (HPC) added. The resulting homogenous solution is incubated at a desired temperature and time to result in a desired product. The methods enable production of high quality sols and gels at lower temperatures than standard methods. The methods enable production of nanosize sols from inorganic metal salts. The methods offer sol-gel processing from inorganic metal salts.
Estimation of economic costs of particulate air pollution from road transport in China
Guo, X. R.; Cheng, S. Y.; Chen, D. S.; Zhou, Y.; Wang, H. Y.
2010-09-01
Valuation of health effects of air pollution is becoming a critical component of the performance of cost-benefit analysis of pollution control measures, which provides a basis for setting priorities for action. Beijing has focused on control of transport emission as vehicular emissions have recently become an important source of air pollution, particularly during Olympic games and Post-games. In this paper, we conducted an estimation of health effects and economic cost caused by road transport-related air pollution using an integrated assessment approach which utilizes air quality model, engineering, epidemiology, and economics. The results show that the total economic cost of health impacts due to air pollution contributed from transport in Beijing during 2004-2008 was 272, 297, 310, 323, 298 million US (mean value), respectively. The economic costs of road transport accounted for 0.52, 0.57, 0.60, 0.62, and 0.58% of annual Beijing GDP from 2004 to 2008. Average cost per vehicle and per ton of PM 10 emission from road transport can also be estimated as 106 US /number and 3584 US $ t -1, respectively. These findings illustrate that the impact of road transport contributed particulate air pollution on human health could be substantial in Beijing, whether in physical and economic terms. Therefore, some control measures to reduce transport emissions could lead to considerable economic benefit.
10 CFR 580.03 - Curtailment priorities.
2010-01-01
... DEPARTMENT OF ENERGY (CONTINUED) NATURAL GAS (ECONOMIC REGULATORY ADMINISTRATION) CURTAILMENT PRIORITIES FOR ESSENTIAL AGRICULTURAL USES § 580.03 Curtailment priorities. (a) Notwithstanding any provision of law other... curtailment of deliveries of natural gas for any essential agricultural use, unless: (1) Such curtailment does...
Inorganic Nanoparticles for Multimodal Molecular Imaging
Directory of Open Access Journals (Sweden)
Magdalena Swierczewska
2011-01-01
Full Text Available Multimodal molecular imaging can offer a synergistic improvement of diagnostic ability over a single imaging modality. Recent development of hybrid imaging systems has profoundly impacted the pool of available multimodal imaging probes. In particular, much interest has been focused on biocompatible, inorganic nanoparticle-based multimodal probes. Inorganic nanoparticles offer exceptional advantages to the field of multimodal imaging owing to their unique characteristics, such as nanometer dimensions, tunable imaging properties, and multifunctionality. Nanoparticles mainly based on iron oxide, quantum dots, gold, and silica have been applied to various imaging modalities to characterize and image specific biologic processes on a molecular level. A combination of nanoparticles and other materials such as biomolecules, polymers, and radiometals continue to increase functionality for in vivo multimodal imaging and therapeutic agents. In this review, we discuss the unique concepts, characteristics, and applications of the various multimodal imaging probes based on inorganic nanoparticles.
Toxicology of organic-inorganic hybrid molecules: bio-organometallics and its toxicology.
Fujie, Tomoya; Hara, Takato; Kaji, Toshiyuki
2016-01-01
Bio-organometallics is a research strategy of biology that uses organic-inorganic hybrid molecules. The molecules are expected to exhibit useful bioactivities based on the unique structure formed by interaction between the organic structure and intramolecular metal(s). However, studies on both biology and toxicology of organic-inorganic hybrid molecules have been incompletely performed. There can be two types of toxicological studies of bio-organometallics; one is evaluation of organic-inorganic hybrid molecules and the other is analysis of biological systems from the viewpoint of toxicology using organic-inorganic hybrid molecules. Our recent studies indicate that cytotoxicity of hybrid molecules containing a metal that is nontoxic in inorganic forms can be more toxic than that of hybrid molecules containing a metal that is toxic in inorganic forms when the structure of the ligand is the same. Additionally, it was revealed that organic-inorganic hybrid molecules are useful for analysis of biological systems important for understanding the toxicity of chemical compounds including heavy metals.
Energy Technology Data Exchange (ETDEWEB)
Zimmermann, R.D.
1982-04-14
Bioindication methods to determine the different pollutant types have been compared using the accumulation indicators Halian ryegrass (cloned material) and pine (Picea abies) and the sensitive indicator species tobacco (Nicotiana tabacum), gladiolus (G. hybridus), tulip (T. gesneriana), leek (A. porrum), clover (T. pratense), alfalfa (M. sativa), spinach (S. oleracea), petunia (P. hybrida), pelargonium (P. zonale), French marigold (T. patula), salvia (S. splendens) and ipomoea (I. purpurea). Field tests were carried out on 15 different sites in Bavaria. By means of the accumulation indicators, inorganic pollutants (S, F, Cl, Pb, Cd, Zn) were to be determined by analyses of the plant material. In the sensitive indicator plants, growth and flowering were studied with regard to external damage. In tobacco plants, also the physiological parameters and the total nitrogen concentration were determined. The following recommendations can be made for region with unknown pollutant levels: Accumulation indicators can be used in large areas; they yield valid information in case of high pollutant levels and react in a highly differentiated manner to site-specific pollutant levels already within the normal concentration range. Sensitive indicators are of use only in the direct vicinity of large-scale pollution sources. They have a signal function and may warn of high air pollution levels.
[Traffic related air pollution and population health: a review about São Paulo (SP), Brazil].
de Toledo, Giovana Iara Ferreira Moser; Nardocci, Adelaide Cássia
2011-09-01
Air pollution is an important problem for São Paulo city and vehicles are the main source. About 11 million people are exposed to this pollution. To examine studies realized about air pollution and its effects on health of the population of São Paulo (Brazil) and methods of assessing exposure to pollution related to traffic. We performed a literature review using the keywords "air pollution", "São Paulo", and traffic-related air pollution. As results were obtained several studies that found relation between air pollution in São Paulo and respiratory and cardiovascular problems, fetal growth, increased mortality and hospitalizations, particularly in children and elderly people. In order to estimate the exposure, most of these studies consider the isotropic distribution of pollutants throughout the area, what prevents the evaluation of and the influence of traffic. Several methods have been used to analyze the air traffic exposure, which can be used isolated or combined. It is believed that the combination of models used to calculate pollutant concentrations to methods of georeferencing is the most appropriate approach for similar studies in São Paulo. The advantages of these methods are the ability to identify priority areas and situations, obtaining detailed information for adoption of public policies or measures, and to simulate different scenarios. The application of these methods in studies at São Paulo depends on the improvement of input data, air quality meteorological monitoring net enhancement and data of traffic volume.
Shahrabi, Narges Salehi; Pourezzat, Aliasghar; Ahmad, Fayaz-Bakhsh; Mafimoradi, Shiva; Poursafa, Parinaz
2013-09-01
Regarding the importance of air pollution issue for large cities, as Tehran metropolis, many plans, programs, projects and regulations have been developed to manage urban air pollution. However, most of them failed to decline the pollution. The purpose of this study is to pathologically analyze air-pollution control plans in order to offer effective solutions for Tehran metropolis. A qualitative content analysis and a semi-structured interview with 14 practicing professionals were used to identify key causes and sources of Tehran's air pollution, to recognize challenges and obstacles towards effective performance of air-pollution control plans in this metropolitan area, and to suggest the most effective controlling solutions. Challenges related to air-pollution control plans can be divided into two major categories: Firstly lack of integrated and organized stewardship and secondly those related to political, economical, social and technical environmental abbreviated as PEST, challenges. For effective control of the Tehran air pollution, the following eight controlling alternatives were identified: Systematization of plan preparation process, organizing the stewardship, standardization and utilization of new technologies and professional experts, cultural and infrastructural development, realization of social justice, developing coordination and controlling mechanisms, improving citizen's participatory capacity, and focusing on effective management of fuel and energy. Controlling air pollution in Tehran should be considered as a priority for policymakers to make enforcements through applying a systemic cycle of preparation effective and comprehensive plans. Further, implement the enforcements and evaluate the environmental impact of the plans through involving all stakeholders.
40 CFR 35.2103 - Priority determination.
2010-07-01
... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Priority determination. 35.2103 Section 35.2103 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY GRANTS AND OTHER FEDERAL ASSISTANCE STATE AND LOCAL ASSISTANCE Grants for Construction of Treatment Works § 35.2103 Priority determination...
Road traffic air and noise pollution exposure assessment - A review of tools and techniques.
Khan, Jibran; Ketzel, Matthias; Kakosimos, Konstantinos; Sørensen, Mette; Jensen, Steen Solvang
2018-09-01
Road traffic induces air and noise pollution in urban environments having negative impacts on human health. Thus, estimating exposure to road traffic air and noise pollution (hereafter, air and noise pollution) is important in order to improve the understanding of human health outcomes in epidemiological studies. The aims of this review are (i) to summarize current practices of modelling and exposure assessment techniques for road traffic air and noise pollution (ii) to highlight the potential of existing tools and techniques for their combined exposure assessment for air and noise together with associated challenges, research gaps and priorities. The study reviews literature about air and noise pollution from urban road traffic, including other relevant characteristics such as the employed dispersion models, Geographic Information System (GIS)-based tool, spatial scale of exposure assessment, study location, sample size, type of traffic data and building geometry information. Deterministic modelling is the most frequently used assessment technique for both air and noise pollution of short-term and long-term exposure. We observed a larger variety among air pollution models as compared to the applied noise models. Correlations between air and noise pollution vary significantly (0.05-0.74) and are affected by several parameters such as traffic attributes, building attributes and meteorology etc. Buildings act as screens for the dispersion of pollution, but the reduction effect is much larger for noise than for air pollution. While, meteorology has a greater influence on air pollution levels as compared to noise, although also important for noise pollution. There is a significant potential for developing a standard tool to assess combined exposure of traffic related air and noise pollution to facilitate health related studies. GIS, due to its geographic nature, is well established and has a significant capability to simultaneously address both exposures. Copyright
Setting stroke research priorities: The consumer perspective.
Sangvatanakul, Pukkaporn; Hillege, Sharon; Lalor, Erin; Levi, Christopher; Hill, Kelvin; Middleton, Sandy
2010-12-01
To test a method of engaging consumers in research priority-setting using a quantitative approach and to determine consumer views on stroke research priorities for clinical practice recommendations with lower levels of evidence (Level III and Level IV) and expert consensus opinion as published in the Australian stroke clinical practice guidelines. Survey Urban community Eighteen stroke survivors (n = 12) and carers (n = 6) who were members of the "Working Aged Group - Stroke" (WAGS) consumer support group. Phase I: Participants were asked whether recommendations were "worth" researching ("yes" or "no"); and, if researched, what potential impact they likely would have on patient outcomes. Phase II: Participants were asked to rank recommendations rated by more than 75% of participants in Phase I as "worth" researching and "highly likely" or "likely" to generate research with a significant effect on patient outcomes (n = 13) in order of priority for future stroke research. All recommendations were rated by at least half (n = 9, 50%) of participants as "worth" researching. The majority (67% to 100%) rated all recommendations as "highly likely" or "likely" that research would have a significant effect on patient outcomes. Thirteen out of 20 recommendations were ranked for their research priorities. Recommendations under the topic heading Getting to hospital were ranked highest and Organization of care and Living with stroke were ranked as a lower priority for research. This study provided an example of how to involve consumers in research priority setting successfully using a quantitative approach. Stroke research priorities from the consumer perspective were different from those of health professionals, as published in the literature; thus, consumer opinion should be considered when setting research priorities. Copyright © 2010 Society for Vascular Nursing, Inc. Published by Mosby, Inc. All rights reserved.
Fertility Evaluation of Limed Brazilian Soil Polluted with Scrap Metal Residue
Directory of Open Access Journals (Sweden)
Flávia Almeida Gabos
2013-01-01
Full Text Available The aim of this work was to characterize the main inorganic contaminants and evaluate the effect of lime addition, combined with soil dilution with uncontaminated soil, as a strategy for mitigation of these contaminants present in a soil polluted with auto scrap. The experiment was performed in a greenhouse at Campinas (São Paulo State, Brazil in plastic pots (3 dm−3. Five soil mixtures, obtained by mixing an uncontaminated soil sample with contaminated soil (0, 25, 50, 75, and 100% contaminated soil, were evaluated for soil fertility, availability of inorganic contaminants, and corn development. In addition to the expected changes in soil chemistry due to the addition of lime, only the availability of Fe and Mn in the soil mixtures was affected, while the available contents of Cu, Zn, Cd, Cr, Ni, and Pb increased to some extent in the soil mixtures with higher proportion of contaminated soil. Liming of 10 t ha−1 followed by soil dilution at any proportion studied was not successful for mitigation of the inorganic contaminants to a desired level of soil fertility, as demonstrated by the available amounts extracted by the DTPA method (Zn, Pb, Cu, Ni, Cr, Cd and hot water (B still present in the soil. This fact was also proved by the phytotoxicity observed and caused by high amounts of B and Zn accumulating in the plant tissue.
Lead pollution, disease, and behaviour
Energy Technology Data Exchange (ETDEWEB)
Bryce-Smith, D; Waldron, H A
1974-01-01
Sources and health effects of atmospheric lead pollution are reviewed. Most of the Pb in gasoline is emitted in the exhaust gases as an aerosol containing particles of inorganic Pb. Some organic Pb is present, but the amount is usually less than 10% of the total. The size of these particles (0.18 to 0.90 micron) ensures maximum pulmonary penetration and absorption. The fallout of airborne particles produces very high concentrations of Pb in city dust, both inside and outside houses. Unpolluted soil contains about 15 ppM Pb, but samples of city dust contain 1000 to 6000 ppM. A daily intake of as little as 30 mg of dust containing 3% Pb produces clinical Pb poisoning in a few months. There is clear evidence to support the thesis that current levels in the environment are capable of producing behavioral abnormalities of types associated with educational disorders and delinquency, and also evidence that delinquents tend to have abnormal lead metabolism.
Setting research priorities by applying the combined approach matrix.
Ghaffar, Abdul
2009-04-01
Priority setting in health research is a dynamic process. Different organizations and institutes have been working in the field of research priority setting for many years. In 1999 the Global Forum for Health Research presented a research priority setting tool called the Combined Approach Matrix or CAM. Since its development, the CAM has been successfully applied to set research priorities for diseases, conditions and programmes at global, regional and national levels. This paper briefly explains the CAM methodology and how it could be applied in different settings, giving examples and describing challenges encountered in the process of setting research priorities and providing recommendations for further work in this field. The construct and design of the CAM is explained along with different steps needed, including planning and organization of a priority-setting exercise and how it could be applied in different settings. The application of the CAM are described by using three examples. The first concerns setting research priorities for a global programme, the second describes application at the country level and the third setting research priorities for diseases. Effective application of the CAM in different and diverse environments proves its utility as a tool for setting research priorities. Potential challenges encountered in the process of research priority setting are discussed and some recommendations for further work in this field are provided.
On Setting Priorities among Human Rights
Philips, Jos
2014-01-01
Should conflicts among human rights be dealt with by including general principles for priority setting at some prominent place in the practice of human rights? This essay argues that neither setting prominent and principled priorities nor a case-by-case approach are likely to be defensible as
International Nuclear Information System (INIS)
Santos, Jacinete Lima dos
2001-01-01
This work presents a study on the synthesis, characterization and ion exchange properties of inorganic ion exchangers based on manganese and potassium. The ion exchangers were synthesized by calcination of the mixture of manganese(II) oxalate and potassium oxalate and were characterized by granulometer distribution analysis, X-ray powder diffraction, infrared spectroscopy and scanning electron microscopic. From the data obtained in characterization it was observed that exist two distinguished groups of these materials. The first group belong to ion exchangers with up to 30% w/w potassium and the second group formed by the ion exchangers with more than 30% w / w of content of potassium in their compositions. The studies of adsorption of these materials showed that the adsorption of Cd 2+ is a function of the following parameters as pH, concentration of Cd 2+ , time of contact between the ion exchangers the concentration of the Cd 2+ solution and the interference of other ions like Ni 2+ . The great pH of adsorption for these materials occur in pH 9, the study of the influence of the cadmium concentration in the adsorption showed that for a group of exchangers the adsorption decreases with the increase of cadmium concentration and for the other group the adsorption increases with the increase of cadmium concentration. The kinetics of adsorption occur in a contact time between the ion exchangers and the Cd 2+ solutions relatively short, at about 15 minutes is necessary to establish the equilibrium. The presence of Ni 2+ as interfering ion decreases the adsorption of cadmium of 99,7% to 65%. These inorganic ion exchangers showed be good exchangers for Cd 2+ . (author)
Phylogenetically-informed priorities for amphibian conservation.
Isaac, Nick J B; Redding, David W; Meredith, Helen M; Safi, Kamran
2012-01-01
The amphibian decline and extinction crisis demands urgent action to prevent further large numbers of species extinctions. Lists of priority species for conservation, based on a combination of species' threat status and unique contribution to phylogenetic diversity, are one tool for the direction and catalyzation of conservation action. We describe the construction of a near-complete species-level phylogeny of 5713 amphibian species, which we use to create a list of evolutionarily distinct and globally endangered species (EDGE list) for the entire class Amphibia. We present sensitivity analyses to test the robustness of our priority list to uncertainty in species' phylogenetic position and threat status. We find that both sources of uncertainty have only minor impacts on our 'top 100' list of priority species, indicating the robustness of the approach. By contrast, our analyses suggest that a large number of Data Deficient species are likely to be high priorities for conservation action from the perspective of their contribution to the evolutionary history.
Phylogenetically-informed priorities for amphibian conservation.
Directory of Open Access Journals (Sweden)
Nick J B Isaac
Full Text Available The amphibian decline and extinction crisis demands urgent action to prevent further large numbers of species extinctions. Lists of priority species for conservation, based on a combination of species' threat status and unique contribution to phylogenetic diversity, are one tool for the direction and catalyzation of conservation action. We describe the construction of a near-complete species-level phylogeny of 5713 amphibian species, which we use to create a list of evolutionarily distinct and globally endangered species (EDGE list for the entire class Amphibia. We present sensitivity analyses to test the robustness of our priority list to uncertainty in species' phylogenetic position and threat status. We find that both sources of uncertainty have only minor impacts on our 'top 100' list of priority species, indicating the robustness of the approach. By contrast, our analyses suggest that a large number of Data Deficient species are likely to be high priorities for conservation action from the perspective of their contribution to the evolutionary history.
International Nuclear Information System (INIS)
Kamaruzaman Mohamad; Rohaimah Demanah; Juhari Mohd Yusof; Roslanzairi Mostapa
2009-01-01
This paperwork explain the method of water sampling to obtain the precipitate of BaCO 3 solutions that will be used to analyze 13 C from field work in Kelana Jaya, Selangor, Langkawi, Kedah and Taiping, Perak. The sampling involves collecting of water samples for groundwater from boreholes and surface water from canal, river, pond and ex-mining pond from several locations at the study sites. This study also elaborates the instruments and chemicals used. The main purpose of this sampling is to obtain the precipitate of BaCO 3 for 13 C analysis of dissolved inorganic carbon (DIC). A correct sampling method according to standard is very important to ensure an accurate and precise result. With this, the data from the laboratory analysis result can be fully utilized to make the interpretation of the pollutants movement. (Author)
Rumen microorganisms decrease bioavailability of inorganic selenium supplements
Despite the availaility of selenium (Se)-enriched trace mineral supplements, we have observed low Se status in cattle and sheep offered traditional inorganic Se supplements. Reasons for this may include inadequate intake or low bioavailability of inorganic Se sources. The objective of this study w...
Pal, Nabanita; Bhaumik, Asim
2013-03-01
With the discovery of MCM-41 by Mobil researchers in 1992 the journey of the research on mesoporous materials started and in the 21st century this area of scientific investigation have extended into numerous branches, many of which contribute significantly in emerging areas like catalysis, energy, environment and biomedical research. As a consequence thousands of publications came out in large varieties of national and international journals. In this review, we have tried to summarize the published works on various synthetic pathways and formation mechanisms of different mesoporous materials viz. inorganic, organic-inorganic hybrid and purely organic solids via soft templating pathways. Generation of nanoscale porosity in a solid material usually requires participation of organic template (more specifically surfactants and their supramolecular assemblies) called structure-directing agent (SDA) in the bottom-up chemical reaction process. Different techniques employed for the syntheses of inorganic mesoporous solids, like silicas, metal doped silicas, transition and non-transition metal oxides, mixed oxides, metallophosphates, organic-inorganic hybrids as well as purely organic mesoporous materials like carbons, polymers etc. using surfactants are depicted schematically and elaborately in this paper. Moreover, some of the frontline applications of these mesoporous solids, which are directly related to their functionality, composition and surface properties are discussed at the appropriate places. Copyright © 2012 Elsevier B.V. All rights reserved.
Directory of Open Access Journals (Sweden)
Teresa Poerio
2009-11-01
Full Text Available Water is today considered to be a vital and limited resource due to industrial development and population growth. Developing appropriate water treatment techniques, to ensure a sustainable management, represents a key point in the worldwide strategies. By removing both organic and inorganic species using techniques based on coupling membrane processes and appropriate complexing agents to bind pollutants are very important alternatives to classical separation processes in water treatment. Supported Liquid Membrane (SLM and Complexation Ultrafiltration (CP-UF based processes meet the sustainability criteria because they require low amounts of energy compared to pressure driven membrane processes, low amounts of complexing agents and they allow recovery of water and some pollutants (e.g., metals. A more interesting process, on the application point of view, is the Stagnant Sandwich Liquid Membrane (SSwLM, introduced as SLM implementation. It has been studied in the separation of the drug gemfibrozil (GEM and of copper(II as organic and inorganic pollutants in water. Obtained results showed in both cases the higher efficiency of SSwLM with respect to the SLM system configuration. Indeed higher stability (335.5 vs. 23.5 hours for GEM; 182.7 vs. 49.2 for copper(II and higher fluxes (0.662 vs. 0.302 mmol·h-1·m-2 for GEM; 43.3 vs. 31.0 for copper(II were obtained by using the SSwLM. Concerning the CP-UF process, its feasibility was studied in the separation of metals from waters (e.g., from soil washing, giving particular attention to process sustainability such as water and polymer recycle, free metal and water recovery. The selectivity of the CP-UF process was also validated in the separate removal of copper(II and nickel(II both contained in synthetic and real aqueous effluents. Thus, complexation reactions involved in the SSwLM and the CP-UF processes play a key role to meet the sustainability criteria.
Intercalation compounds involving inorganic layered structures
Directory of Open Access Journals (Sweden)
CONSTANTINO VERA R. L.
2000-01-01
Full Text Available Two-dimensional inorganic networks can shown intracrystalline reactivity, i.e., simple ions, large species as Keggin ions, organic species, coordination compounds or organometallics can be incorporated in the interlayer region. The host-guest interaction usually causes changes in their chemical, catalytic, electronic and optical properties. The isolation of materials with interesting properties and making use of soft chemistry routes have given rise the possibility of industrial and technological applications of these compounds. We have been using several synthetic approaches to intercalate porphyrins and phthalocyanines into inorganic materials: smectite clays, layered double hydroxides and layered niobates. The isolated materials have been characterized by elemental and thermal analysis, X-ray diffraction, surface area measurements, scanning electronic microscopy, electronic and resonance Raman spectroscopies and EPR. The degree of layer stacking and the charge density of the matrices as well their acid-base nature were considered in our studies on the interaction between the macrocycles and inorganic hosts.
Industrial pollution and the management of river water quality: a model of Kelani River, Sri Lanka.
Gunawardena, Asha; Wijeratne, E M S; White, Ben; Hailu, Atakelty; Pandit, Ram
2017-08-19
Water quality of the Kelani River has become a critical issue in Sri Lanka due to the high cost of maintaining drinking water standards and the market and non-market costs of deteriorating river ecosystem services. By integrating a catchment model with a river model of water quality, we developed a method to estimate the effect of pollution sources on ambient water quality. Using integrated model simulations, we estimate (1) the relative contribution from point (industrial and domestic) and non-point sources (river catchment) to river water quality and (2) pollutant transfer coefficients for zones along the lower section of the river. Transfer coefficients provide the basis for policy analyses in relation to the location of new industries and the setting of priorities for industrial pollution control. They also offer valuable information to design socially optimal economic policy to manage industrialized river catchments.
Priority for sustainability. Study of the effects on investment climate
International Nuclear Information System (INIS)
2007-12-01
The Dutch cabinet has been asked to make sure that sustainable electricity plants can be connected to the grid with high priority. By request of the Dutch Ministry of Economic Affairs, the effects on the investment climate have been examined (both for sustainable and conventional) if priority (with regard to connection and transport) is given to sustainable generated electricity. Five models for priority for sustainable have been defined, i.e. (1) Sustainable is only given priority on the waiting list for connection; (2) Connect sustainable immediately, but no priority for transport; (3) Connect sustainable immediately and priority granted in transport; (4) Connect sustainable and conventional immediately, no priority for transport; (5) Connect sustainable and conventional immediately and give priority in transport to sustainable. [mk] [nl
Islam, Md Atikul; Romić, Davor; Akber, Md Ali; Romić, Marija
2018-02-01
Trace metals accumulation in soil irrigated with polluted water and human health risk from vegetable consumption was assessed based on the data available in the literature on metals pollution of water, soil, sediment and vegetables from the cites of Bangladesh. The quantitative data on metal concentrations, their contamination levels and their pollution sources have not been systematically gathered and studied so far. The data on metal concentrations, sources, contamination levels, sample collection and analytical tools used were collected, compared and discussed. The USEPA-recommended method for health risk assessment was used to estimate human risk from vegetable consumption. Concentrations of metals in water were highly variable, and the mean concentrations of Cd, Cr, Cu and As in water were found to be higher than the FAO irrigation water quality standard. In most cases, mean concentrations of metals in soil were higher than the Bangladesh background value. Based on geoaccumulation index (I geo ) values, soils of Dhaka city are considered as highly contaminated. The I geo shows Cd, As, Cu, Ni, Pb and Cr contamination of agricultural soils and sediments of the cities all over the Bangladesh. Polluted water irrigation and agrochemicals are identified as dominant sources of metals in agricultural soils. Vegetable contamination by metals poses both non-carcinogenic and carcinogenic risks to the public. Based on the results of the pollution and health risk assessments, Cd, As, Cr, Cu, Pb and Ni are identified as the priority control metals and the Dhaka city is recommended as the priority control city. This study provides quantitative evidence demonstrating the critical need for strengthened wastewater discharge regulations in order to protect residents from heavy metal discharges into the environment.
Directory of Open Access Journals (Sweden)
Nicole Jaffrezic-Renault
2010-08-01
Full Text Available This review discusses from a critical perspective the development of new sensors for the measurement of priority pollutants targeted in the E.U. Water Framework Directive. Significant advances are reported in the paper and their advantages and limitations are also discussed. Future perspectives in this area are also pointed out in the conclusions. This review covers publications appeared since December 2006 (the publication date of the Swift report. Among priority substances, sensors for monitoring the four WFD metals represent 81% of published papers. None of analyzed publications present a micro-sensor totally validated in laboratory, ready for tests under real conditions in the field. The researches are mainly focused on the sensing part of the micro-sensors. Nevertheless, the main factor limiting micro-sensor applications in the environment is the ruggedness of the receptor towards environmental conditions. This point constitutes the first technological obstacle to be overcome for any long-term field tests.
Inorganic component of saliva during fasting and after fast break
Samad, Rasmidar
2016-01-01
Oral health is closely related to salivary components. Saliva consists of water, inorganic and organic materials. Fasting changes one???s meal and drinking time that in turn can affect the environment in oral cavity, including inorganic componenet of saliva. The purpose of this study is to determine the inorganic component of saliva during fasting and after fast break.
Graphene templated Directional Growth of an Inorganic Nanowire
2015-03-23
14,23–25 have only formed randomly oriented or poorly aligned inorganic nanostructures. Here, we show that inorganic nanowires of gold(I) cyanide can... complex . TEM image simulation from the crystal structure The TEM image simulations are performed using MacTempas and CrystalKit. The imaging
Priority Queues Resilient to Memory Faults
DEFF Research Database (Denmark)
Jørgensen, Allan Grønlund; Moruz, Gabriel; Mølhave, Thomas
2007-01-01
In the faulty-memory RAM model, the content of memory cells can get corrupted at any time during the execution of an algorithm, and a constant number of uncorruptible registers are available. A resilient data structure in this model works correctly on the set of uncorrupted values. In this paper we...... introduce a resilient priority queue. The deletemin operation of a resilient priority queue returns either the minimum uncorrupted element or some corrupted element. Our resilient priority queue uses $O(n)$ space to store $n$ elements. Both insert and deletemin operations are performed in $O(\\log n...... queues storing only structural information in the uncorruptible registers between operations....
Frontalini, F; Curzi, D; Giordano, F M; Bernhard, J M; Falcieri, E; Coccioni, R
2015-01-30
The responses of Ammonia parkinsoniana (Foraminifera) exposed to different concentrations of lead (Pb) were evaluated at the cytological level. Foraminifera-bearing sediments were placed in mesocosms that were housed in aquaria each with seawater of a different lead concentration. On the basis of transmission electron microscopy and environmental scanning electron microscopy coupled with energy dispersive spectrometer analyses, it was possible to recognize numerous morphological differences between untreated (i.e., control) and treated (i.e., lead enrichment) specimens. In particular, higher concentrations of this pollutant led to numerical increase of lipid droplets characterized by a more electron-dense core, proliferation of residual bodies, a thickening of the organic lining, mitochondrial degeneration, autophagosome proliferation and the development of inorganic aggregates. All these cytological modifications might be related to the pollutant-induced stress and some of them such as the thickening of organic lining might suggest a potential mechanism of protection adopted by foraminifera.
Study of the influence of different organic pollutants on Cu accumulation by Halimione portulacoides
Almeida, C. Marisa R.; Claúdia Dias, A.; Mucha, Ana P.; Bordalo, A. A.; Vasconcelos, M. Teresa S. D.
2009-12-01
The influence of each of four organic pollutants selected from among those commonly found in coastal areas, 1,1-dichloro-2,2-bis(p-chlorophenyl) ethylene (DDE), monobutyltin (MBT), Triton X-100 and polycyclic aromatic hydrocarbons (PAHs), on Cu accumulation by Halimione portulacoides was investigated. Experiments were carried out in a laboratory setting, either in hydroponics (sediment elutriate) or in a salt marsh sediment ( Cávado River, NW Portugal) soaked in elutriate. Groups of H. portulacoides were exposed to media for 6 days spiked with 10 mg/L Cu(II) and with one of the selected pollutants, at an environmentally realistic concentration. DDE and MBT did not cause any major change on Cu accumulation by H. portulacoides, whereas PAHs slightly increased accumulation only in hydroponics i.e. in the absence of sediment. On the other hand, the non-ionic surfactant Triton X-100 markedly favoured Cu accumulation on plant roots both in the presence and absence of sediment. The addition of DDE, MBT and Triton X-100 also favoured Cu solubility from sediments. Therefore, the simultaneous presence of pollutants from different nature (inorganic and organic) in the estuarine environment may result in a composition of water column, pore water, sediment or biota different of that expected considering the effect of each individual pollutant.
Interactive effects of global climate change and pollution on marine microbes: the way ahead.
Coelho, Francisco J R C; Santos, Ana L; Coimbra, Joana; Almeida, Adelaide; Cunha, Angela; Cleary, Daniel F R; Calado, Ricardo; Gomes, Newton C M
2013-06-01
Global climate change has the potential to seriously and adversely affect marine ecosystem functioning. Numerous experimental and modeling studies have demonstrated how predicted ocean acidification and increased ultraviolet radiation (UVR) can affect marine microbes. However, researchers have largely ignored interactions between ocean acidification, increased UVR and anthropogenic pollutants in marine environments. Such interactions can alter chemical speciation and the bioavailability of several organic and inorganic pollutants with potentially deleterious effects, such as modifying microbial-mediated detoxification processes. Microbes mediate major biogeochemical cycles, providing fundamental ecosystems services such as environmental detoxification and recovery. It is, therefore, important that we understand how predicted changes to oceanic pH, UVR, and temperature will affect microbial pollutant detoxification processes in marine ecosystems. The intrinsic characteristics of microbes, such as their short generation time, small size, and functional role in biogeochemical cycles combined with recent advances in molecular techniques (e.g., metagenomics and metatranscriptomics) make microbes excellent models to evaluate the consequences of various climate change scenarios on detoxification processes in marine ecosystems. In this review, we highlight the importance of microbial microcosm experiments, coupled with high-resolution molecular biology techniques, to provide a critical experimental framework to start understanding how climate change, anthropogenic pollution, and microbiological interactions may affect marine ecosystems in the future.
Polystyrene-poly(vinylphenol) copolymers as compatibilzers for organic-inorganic composites
International Nuclear Information System (INIS)
Landry, C.J.T.; Coltrain, B.K.; Teegarden, D.M.
1996-01-01
Random, graft, and block copolymers of polystyrene (PS) and poly(4-vinylphenol) (PVPh), and PVPh homopolymer are shown to act as compatibilizers for incompatible organic-inorganic composite materials. The VPh component reacts, or interacts strongly with the polymerizing inorganic (titanium or zirconium) alkoxide. The organic components studied were PS, poly(vinyl methyl ether), and poly(styrene-co-acrylonitrile). The use of such compatibilizers provides a means of combining in situ polymerized inorganic oxides and hydrophobic polymers. This is seen as a reduction in the size of the dispersed inorganic phase and results in improved optical and mechanical properties
Ye, Wei; Zhang, Xu; Gao, Jun; Cao, Guangyu; Zhou, Xiang; Su, Xing
2017-05-15
After nearly twenty years of rapid modernization and urbanization in China, huge achievements have transformed the daily lives of the Chinese people. However, unprecedented environmental consequences in both indoor and outdoor environments have accompanied this progress and have triggered public awareness and demands for improved living standards, especially in residential environments. Indoor pollution data measured for >7000 dwellings (approximately 1/3 were newly decorated and were tested for volatile organic compound (VOC) measurements, while the rest were tested for particles, phthalates and other semi-volatile organic compounds (SVOCs), moisture/mold, inorganic gases and radon) in China within the last ten years were reviewed, summarized and compared with indoor concentration recommendations based on sensory or health end-points. Ubiquitous pollutants that exceed the concentration recommendations, including particulate matter, formaldehyde, benzene and other VOCs, moisture/mold, inorganic gases and radon, were found, indicating a common indoor air quality (IAQ) issue in Chinese dwellings. With very little prevention, oral, inhalation and dermal exposure to those pollutants at unhealthy concentration levels is almost inevitable. CO 2 , VOCs, humidity and radon can serve as ventilation determinants, each with different ventilation demands and strategies, at typical occupant densities in China; and particle reduction should be a prerequisite for determining ventilation requirements. Two directional ventilation modes would have profound impacts on improving IAQ for Chinese residences are: 1) natural (or window) ventilation with an air cleaner and 2) mechanical ventilation with an air filtration unit, these two modes were reviewed and compared for their applicability and advantages and disadvantages for reducing human exposure to indoor air pollutants. In general, mode 2 can more reliably ensure good IAQ for occupants; while mode 1 is more applicable due to its
Energy Technology Data Exchange (ETDEWEB)
Logue, Jennifer M. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Indoor Environment Group and Residential Building Systems Group; Klepeis, Neil E. [Stanford Univ., CA (United States). Dept. of Civil and Environmental Engineering; San Diego Univ., CA (United States). Center for Behavioral Epidemiology and Community Health; Lobscheid, Agnes B. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Indoor Environment Group; Singer, Brett C. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Indoor Environment Group and Residential Building Systems Group
2014-01-01
Residential natural gas cooking burners (NGCBs) can emit substantial quantities of pollutants, and they are typically used without venting range hoods. In this study, LBNL researchers quantified pollutant concentrations and occupant exposures resulting from NGCB use in California homes.The simulation model estimated that—in homes using NGCBs without coincident use of venting range hoods -- 62%, 9%, and 53% of occupants are routinely exposed to NO2, CO, and HCHO levels that exceed acute health-based standards and guidelines. NGCB use increased the sample median of the highest simulated 1-hr indoor concentrations by 100, 3,000, and 20 ppb for NO2, CO, and HCHO, respectively. The study recommends that reducing pollutant exposures from NGCBs should be a public health priority. Simulation results suggest that regular use of even moderately effective venting range hoods would dramatically reduce the percentage of homes in which concentrations exceed health-based standards.
2014-08-05
The Assistant Secretary for the Office of Special Education and Rehabilitative Services (OSERS) announces a priority under the Technical Assistance on State Data Collection program. The Assistant Secretary may use this priority for competitions in fiscal year (FY) 2014 and later years. We take this action to fund a cooperative agreement to establish and operate an IDEA Data Management Center (Center) that will provide technical assistance (TA) to improve the capacity of States to meet the data collection requirements of the Individuals with Disabilities Education Act (IDEA).
Methodological issues in studies of air pollution and reproductive health.
Woodruff, Tracey J; Parker, Jennifer D; Darrow, Lyndsey A; Slama, Rémy; Bell, Michelle L; Choi, Hyunok; Glinianaia, Svetlana; Hoggatt, Katherine J; Karr, Catherine J; Lobdell, Danelle T; Wilhelm, Michelle
2009-04-01
In the past decade there have been an increasing number of scientific studies describing possible effects of air pollution on perinatal health. These papers have mostly focused on commonly monitored air pollutants, primarily ozone (O(3)), particulate matter (PM), sulfur dioxide (SO(2)), carbon monoxide (CO), and nitrogen dioxide (NO(2)), and various indices of perinatal health, including fetal growth, pregnancy duration, and infant mortality. While most published studies have found some marker of air pollution related to some types of perinatal outcomes, variability exists in the nature of the pollutants and outcomes associated. Synthesis of the findings has been difficult for various reasons, including differences in study design and analysis. A workshop was held in September 2007 to discuss methodological differences in the published studies as a basis for understanding differences in study findings and to identify priorities for future research, including novel approaches for existing data. Four broad topic areas were considered: confounding and effect modification, spatial and temporal exposure variations, vulnerable windows of exposure, and multiple pollutants. Here we present a synopsis of the methodological issues and challenges in each area and make recommendations for future study. Two key recommendations include: (1) parallel analyses of existing data sets using a standardized methodological approach to disentangle true differences in associations from methodological differences among studies; and (2) identification of animal studies to inform important mechanistic research gaps. This work is of critical public health importance because of widespread exposure and because perinatal outcomes are important markers of future child and adult health.
DEFF Research Database (Denmark)
Hedegaard, Rikke Susanne Vingborg; Rokkjær, Inge; Sloth, Jens Jørgen
2013-01-01
The content of total and inorganic arsenic was determined in 16 dietary supplements based on herbs, other botanicals and algae purchased on the Danish market. The dietary supplements originated from various regions, including Asia, Europe and USA. The contents of total and inorganic arsenic...... was determined by inductively coupled plasma mass spectrometry (ICP-MS) and anion exchange HPLC-ICP-MS, respectively, were in the range of 0.58 to 5.0 mgkg−1 and 0.03 to 3.2 mg kg−1, respectively, with a ratio between inorganic arsenic and total arsenic ranging between 5 and 100 %. Consumption of the recommended...... dose of the individual dietary supplement would lead to an exposure to inorganic arsenic within the range of 0.07 to 13 μg day−1. Such exposure from dietary supplements would in worst case constitute 62.4 % of the range of benchmark dose lower confidence limit values (BMDL01 at 0.3 to 8 μg kg bw−1 kg−1...
Leadership and priority setting: the perspective of hospital CEOs.
Reeleder, David; Goel, Vivek; Singer, Peter A; Martin, Douglas K
2006-11-01
The role of leadership in health care priority setting remains largely unexplored. While the management leadership literature has grown rapidly, the growing literature on priority setting in health care has looked in other directions to improve priority setting practices--to health economics and ethical approaches. Consequently, potential for improvement in hospital priority setting practices may be overlooked. A qualitative study involving interviews with 46 Ontario hospital CEOs was done to describe the role of leadership in priority setting through the perspective of hospital leaders. For the first time, we report a framework of leadership domains including vision, alignment, relationships, values and process to facilitate priority setting practices in health services' organizations. We believe this fledgling framework forms the basis for the sharing of good leadership practices for health reform. It also provides a leadership guide for decision makers to improve the quality of their leadership, and in so doing, we believe, the fairness of their priority setting.
10 CFR 216.7 - Conflict in priority orders.
2010-01-01
... 10 Energy 3 2010-01-01 2010-01-01 false Conflict in priority orders. 216.7 Section 216.7 Energy... DOMESTIC ENERGY SUPPLIES § 216.7 Conflict in priority orders. If it appears that the use of assistance pursuant to DPA section 101(c) creates or threatens to create a conflict with priorities and allocation...
International Nuclear Information System (INIS)
Fukano, K.; Kageyama, E.
1975-01-01
The radiation-induced polymerization of methyl methacrylate (MMA) adsorbed on such inorganic substances as silica gel, white carbon, silicic acid anhydride, zeolite, and activated alumina was carried out to compare with the case of styrene. The rate of radiation-induced polymerization adsorbed on inorganic substances was high compared with that of radiation-induced bulk state polymerization, as was the case with styrene. Inorganic substrates which contain aluminum as a component element are more likely to be grafted than those which consist of SiO 2 alone, as with styrene. The molecular weight distribution of unextractable polymer and extractable polymer differs, depending on the type of inorganic substance. Experiments by a preirradiation method were carried out in case of silica gel, white carbon, and silicic acid anhydride. GPC spectra of the polymer obtained were different from those of polymer formed by the simultaneous irradiation method. It appears that all the unextractable polymer is grafted to the inorganic surface with chemical bond
Ventilation Relevant Contaminants of Concern in Commercial Buildings Screening Process and Results
Energy Technology Data Exchange (ETDEWEB)
Parthasarathy, Srinandini [Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States); McKone, Thomas E. [Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States); Apte, Michael G. [Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States)
2011-04-29
This report summarizes the screening procedure and its results for selecting contaminants of concern (COC), whose concentrations are affected by ventilation in commercial buildings. Many pollutants comprising criteria pollutants, volatile organic compounds (VOCs), semi-volatile organic compounds (SVOCs) and biological contaminants are found in commercial buildings. In this report, we focus primarily on identifying potential volatile organic COC, which are impacted by ventilation. In the future we plan to extend this effort to inorganic gases and particles. Our screening considers compounds detected frequently in indoor air and compares the concentrations to health-guidelines and thresholds. However, given the range of buildings under consideration, the contaminant sources and their concentrations will vary depending on the activity and use of the buildings. We used a literature review to identify a large list of chemicals found in commercial-building indoor air. The VOCs selected were subject to a two stage screening process, and the compounds of greater interest are included in priority List A. Other VOCs that have been detected in commercial buildings are included in priority List B. The compounds in List B, were further classified into groups B1, B2, B3, B4 in order of decreasing interest.
Mechanics and thermal management of stretchable inorganic electronics.
Song, Jizhou; Feng, Xue; Huang, Yonggang
2016-03-01
Stretchable electronics enables lots of novel applications ranging from wearable electronics, curvilinear electronics to bio-integrated therapeutic devices that are not possible through conventional electronics that is rigid and flat in nature. One effective strategy to realize stretchable electronics exploits the design of inorganic semiconductor material in a stretchable format on an elastomeric substrate. In this review, we summarize the advances in mechanics and thermal management of stretchable electronics based on inorganic semiconductor materials. The mechanics and thermal models are very helpful in understanding the underlying physics associated with these systems, and they also provide design guidelines for the development of stretchable inorganic electronics.
Mechanics and thermal management of stretchable inorganic electronics
Song, Jizhou; Feng, Xue; Huang, Yonggang
2016-01-01
Stretchable electronics enables lots of novel applications ranging from wearable electronics, curvilinear electronics to bio-integrated therapeutic devices that are not possible through conventional electronics that is rigid and flat in nature. One effective strategy to realize stretchable electronics exploits the design of inorganic semiconductor material in a stretchable format on an elastomeric substrate. In this review, we summarize the advances in mechanics and thermal management of stretchable electronics based on inorganic semiconductor materials. The mechanics and thermal models are very helpful in understanding the underlying physics associated with these systems, and they also provide design guidelines for the development of stretchable inorganic electronics. PMID:27547485
International Nuclear Information System (INIS)
Garnett, H.M.
1999-01-01
As Australia's major centre of expertise in nuclear science, technology and its applications, ANSTO's priorities take account of the stated strategic and tactical needs of its various stakeholders, which in turn are considered as the Government (as owner), industry - including the health sector, the academic and research community and the public at large. Its priorities also take account of the opportunities perceived by its own staff in the light of the organisation's strengths, the activities of the international scientific, technology and industry community and a rapidly changing socioeconomic environment where environmental management and social accountability are becoming as important as fiscal responsibility and accountability
Holzmeister, Ib; Schamel, Martha; Groll, Jürgen; Gbureck, Uwe; Vorndran, Elke
2018-04-23
Biohybrids can be defined as the functional combination of proteins, viable cells or microorganisms with non-biological materials. This article reviews recent findings on the encapsulation of microorganisms and eukaryotic cells in inorganic matrices such as silica gels or cements. The entrapment of biological entities into a support material is of great benefit for processing since the encapsulation matrix protects sensitive cells from shear forces, unfavourable pH changes, or cytotoxic solvents, avoids culture-washout, and simplifies the separation of formed products. After reflecting general aspects of such an immobilization as well as the chemistry of the inorganic matrices, we focused on manufacturing aspects and the application of such biohybrids in biotechnology, medicine as well as in environmental science and for civil engineering purpose. The encapsulation of living cells and microorganisms became an intensively studied and rapidly expanding research field with manifold applications in medicine, bio- and environmental technology, or civil engineering. Here, the use of silica or cements as encapsulation matrices have the advantage of a higher chemical and mechanical resistance towards harsh environmental conditions during processing compared to their polymeric counterparts. In this perspective, the article gives an overview about the inorganic material systems used for cell encapsulation, followed by reviewing the most important applications. The future may lay in a combination of the currently achieved biohybrid systems with additive manufacturing techniques. In a longer perspective, this would enable the direct printing of cell loaded bioreactor components. Copyright © 2018. Published by Elsevier Ltd.
Inorganic soil and groundwater chemistry near Paducah Gaseous Diffusion Plant, Paducah, Kentucky
Energy Technology Data Exchange (ETDEWEB)
Moore, G.K. [Tennessee Univ., Knoxville, TN (United States)
1995-03-01
Near-surface soils, boreholes, and sediments near the Paducah Gaseous Diffusion Plant (PGDP) were sampled in 1989-91 as were monitoring wells, TVA wells, and privately-owned wells. Most wells were sampled two or three times. The resulting chemical analyses have been published in previous reports and have been previously described (CH2M HILL 1991, 1992; Clausen et al. 1992). The two reports by CH2M HILL are controversial, however, because, the concentrations of some constituents were reported to exceed background levels or drinking water standards and because both on-site (within the perimeter fence at PGDP) and off-site pollution was reported to have occurred. The groundwater samples upon which these interpretations were based may not be representative, however. The CH2M HILL findings are discussed in the report. The purpose of this report is to characterize the inorganic chemistry of groundwater and soils near PGDP, using data from the CH2M HILL reports (1991, 1992), and to determine whether or not any contamination has occurred. The scope is limited to analysis and interpretation of data in the CH2M HILL reports because previous interpretations of these data may not be valid, because samples were collected in a relatively short period of time at several hundred locations, and because the chemical analyses are nearly complete. Recent water samples from the same wells were not considered because the characterization of inorganic chemistry for groundwater and soil requirements only one representative sample and an accurate analysis from each location.
Inorganic soil and groundwater chemistry near Paducah Gaseous Diffusion Plant, Paducah, Kentucky
International Nuclear Information System (INIS)
Moore, G.K.
1995-03-01
Near-surface soils, boreholes, and sediments near the Paducah Gaseous Diffusion Plant (PGDP) were sampled in 1989-91 as were monitoring wells, TVA wells, and privately-owned wells. Most wells were sampled two or three times. The resulting chemical analyses have been published in previous reports and have been previously described (CH2M HILL 1991, 1992; Clausen et al. 1992). The two reports by CH2M HILL are controversial, however, because, the concentrations of some constituents were reported to exceed background levels or drinking water standards and because both on-site (within the perimeter fence at PGDP) and off-site pollution was reported to have occurred. The groundwater samples upon which these interpretations were based may not be representative, however. The CH2M HILL findings are discussed in the report. The purpose of this report is to characterize the inorganic chemistry of groundwater and soils near PGDP, using data from the CH2M HILL reports (1991, 1992), and to determine whether or not any contamination has occurred. The scope is limited to analysis and interpretation of data in the CH2M HILL reports because previous interpretations of these data may not be valid, because samples were collected in a relatively short period of time at several hundred locations, and because the chemical analyses are nearly complete. Recent water samples from the same wells were not considered because the characterization of inorganic chemistry for groundwater and soil requirements only one representative sample and an accurate analysis from each location
Gas priority users consultation : government response
International Nuclear Information System (INIS)
2007-01-01
This consultation document presents the results of an updated analysis of gas priority users comments on the UK government's proposals for updating the current priority lists, amending the eligibility criteria for priority user status, and simplifying the administration of the scheme. The extension of Category C priority users to include sites where interruption of gas supplies would lead to damage exceeding fifty million pounds to a plant at another site is discussed. It is acknowledged that there is a preference for a reduction of gas demand as opposed to a cessation in the case of an emergency gas supply deficit and details are given of a Task Group set up to examine options for reducing demand rather than cessation for large industrial gas users. The role of the Network Emergency Co-ordinator, support for a more flexible approach, pre-agreed rota interruption, a long-duration emergency, demand reduction, and the establishment of a Government/Industry Gas/Electricity Task Group are discussed, and the raising of the load shedding threshold of 25,000 therms/yr is considered
Directory of Open Access Journals (Sweden)
Narges Salehi Shahrabi
2013-01-01
Full Text Available Background: Regarding the importance of air pollution issue for large cities, as Tehran metropolis, many plans, programs, projects and regulations have been developed to manage urban air pollution. However, most of them failed to decline the pollution. The purpose of this study is to pathologically analyze air-pollution control plans in order to offer effective solutions for Tehran metropolis. Methods: A qualitative content analysis and a semi-structured interview with 14 practicing professionals were used to identify key causes and sources of Tehran′s air pollution, to recognize challenges and obstacles towards effective performance of air-pollution control plans in this metropolitan area, and to suggest the most effective controlling solutions. Results: Challenges related to air-pollution control plans can be divided into two major categories: Firstly lack of integrated and organized stewardship and secondly those related to political, economical, social and technical environmental abbreviated as PEST, challenges. For effective control of the Tehran air pollution, the following eight controlling alternatives were identified: Systematization of plan preparation process, organizing the stewardship, standardization and utilization of new technologies and professional experts, cultural and infrastructural development, realization of social justice, developing coordination and controlling mechanisms, improving citizen′s participatory capacity, and focusing on effective management of fuel and energy. Conclusions: Controlling air pollution in Tehran should be considered as a priority for policymakers to make enforcements through applying a systemic cycle of preparation effective and comprehensive plans. Further, implement the enforcements and evaluate the environmental impact of the plans through involving all stakeholders.
van Zelm, Rosalie; Preiss, Philipp; van Goethem, Thomas; Van Dingenen, Rita; Huijbregts, Mark
2016-06-01
We developed regionalized characterization factors (CFs) for human health damage from particulate matter (PM2.5) and ozone, and for damage to vegetation from ozone, at the global scale. These factors can be used in the impact assessment phase of an environmental life cycle assessment. CFs express the overall damage of a certain pollutant per unit of emission of a precursor, i.e. primary PM2.5, nitrogen oxides (NOx), ammonia (NH3), sulfur dioxide (SO2) and non-methane volatile organic compounds (NMVOCs). The global chemical transport model TM5 was used to calculate intake fractions of PM2.5 and ozone for 56 world regions covering the whole globe. Furthermore, region-specific effect and damage factors were derived, using mortality rates, background concentrations and years of life lost. The emission-weighted world average CF for primary PM2.5 emissions is 629 yr kton-1, varying up to 3 orders of magnitude over the regions. Larger CFs were obtained for emissions in central Asia and Europe, and smaller factors in Australia and South America. The world average CFs for PM2.5 from secondary aerosols, i.e. NOx, NH3, and SO2, is 67.2 to 183.4 yr kton-1. We found that the CFs for ozone human health damage are 2-4 orders of magnitude lower compared to the CFs for damage due to primary PM2.5 and PM2.5 precursor emissions. Human health damage due to the priority air pollutants considered in this study was 1.7·10-2 yr capita-1 worldwide in year 2010, with primary PM2.5 emissions as the main contributor (62%). The emission-weighted world average CF for ecosystem damage due to ozone was 2.5 km2 yr kton-1 for NMVOCs and 8.7 m2 yr kg-1 for NOx emissions, varying 2-3 orders of magnitude over the regions. Ecosystem damage due to the priority air pollutants considered in this study was 1.6·10-4 km2 capita-1 worldwide in 2010, with NOx as the main contributor (72%). The spatial range in CFs stresses the importance of including spatial variation in life cycle impact assessment of
Economics and Security: Resourcing National Priorities
2010-05-21
Papers Number 5 N um ber 5 Econom ics and Security: R esourcing N ational Priorities http://www.usnwc.edu Report Documentation Page Form ApprovedOMB No...2010 William B. Ruger Chair of National Security Economics Papers Number 5 N um ber 5 Econom ics and Security: R esourcing N ational Priorities http://www.usnwc.edu
Deane, Katherine H O; Flaherty, Helen; Daley, David J; Pascoe, Roland; Penhale, Bridget; Clarke, Carl E; Sackley, Catherine; Storey, Stacey
2014-12-14
This priority setting partnership was commissioned by Parkinson's UK to encourage people with direct and personal experience of the condition to work together to identify and prioritise the top 10 evidential uncertainties that impact on everyday clinical practice for the management of Parkinson's disease (PD). The UK. Anyone with experience of PD including: people with Parkinson's (PwP), carers, family and friends, healthcare and social care professionals. Non-clinical researchers and employees of pharmaceutical or medical devices companies were excluded. 1000 participants (60% PwP) provided ideas on research uncertainties, 475 (72% PwP) initially prioritised them and 27 (37% PwP) stakeholders agreed a final top 10. Using a modified nominal group technique, participants were surveyed to identify what issues for the management of PD needed research. Unique research questions unanswered by current evidence were identified and participants were asked to identify their top 10 research priorities from this list. The top 26 uncertainties were presented to a consensus meeting with key stakeholders to agree the top 10 research priorities. 1000 participants provided 4100 responses, which contained 94 unique unanswered research questions that were initially prioritised by 475 participants. A consensus meeting with 27 stakeholders agreed the top 10 research priorities. The overarching research aspiration was an effective cure for PD. The top 10 research priorities for PD management included the need to address motor symptoms (balance and falls, and fine motor control), non-motor symptoms (sleep and urinary dysfunction), mental health issues (stress and anxiety, dementia and mild cognitive impairments), side effects of medications (dyskinesia) and the need to develop interventions specific to the phenotypes of PD and better monitoring methods. These research priorities identify crucial gaps in the existing evidence to address everyday practicalities in the management of the
Dević, Gordana; Sakan, Sanja; Đorđević, Dragana
2016-01-01
In this paper, the data for ten water quality variables collected during 2009 at 75 monitoring sites along the river network of Serbia are considered. The results are alarming because 48% of the studied sites were contaminated by Ni, Mn, Pb, As, and nutrients, which are key factors impairing the water quality of the rivers in Serbia. Special attention should be paid to Zn and Cu, listed in the priority toxic pollutants of US EPA for aquatic life protection. The employed Q-model cluster analysis grouped the data into three major pollution zones (low, moderate, and high). Most sites classified as "low pollution zones" (LP) were in the main rivers, whereas those classified as "moderate and high pollution zones" (MP and HP, respectively) were in the large and small tributaries/hydro-system. Principal component analysis/factor analysis (PCA/FA) showed that the dissolved metals and nutrients in the Serbian rivers varied depending on the river, the heterogeneity of the anthropogenic activities in the basins (influenced primarily by industrial wastewater, agricultural activities, and urban runoff pollution), and natural environmental variability, such as geological characteristics. In LP dominated non-point source pollution, such as agricultural and urban runoff, whereas mixed source pollution dominated in the MP and HP zones. These results provide information to be used for developing better pollution control strategies for the river network of Serbia.
Jones, Jennifer; Bhatt, Jaimin; Avery, Jonathan; Laupacis, Andreas; Cowan, Katherine; Basappa, Naveen; Basiuk, Joan; Canil, Christina; Al-Asaaed, Sohaib; Heng, Daniel; Wood, Lori; Stacey, Dawn; Kollmannsberger, Christian; Jewett, Michael A S
2017-12-01
It is critically important to define disease-specific research priorities to better allocate limited resources. There is growing recognition of the value of involving patients and caregivers, as well as expert clinicians in this process. To our knowledge, this has not been done this way for kidney cancer. Using the transparent and inclusive process established by the James Lind Alliance, the Kidney Cancer Research Network of Canada (KCRNC) sponsored a collaborative consensus-based priority-setting partnership (PSP) to identify research priorities in the management of kidney cancer. The final result was identification of 10 research priorities for kidney cancer, which are discussed in the context of current initiatives and gaps in knowledge. This process provided a systematic and effective way to collaboratively establish research priorities with patients, caregivers, and clinicians, and provides a valuable resource for researchers and funding agencies.
Polling, production & priorities
Winands, E.M.M.
2007-01-01
Polling, Production & Priorities The present monograph focuses on the so-called stochastic economic lot scheduling problem (SELSP), which deals with the make-to-stock production of multiple standardized products on a single machine with limited capacity under random demands, possibly random setup
Optimal purely functional priority queues
DEFF Research Database (Denmark)
Brodal, Gerth Stølting; Okasaki, Chris
1996-01-01
Brodal recently introduced the first implementation of imperative priority queues to support findMin, insert and meld in O(1) worst-case time, and deleteMin in O(log n) worst-case time. These bounds are asymptotically optimal among all comparison-based priority queues. In this paper, we adapt...... Brodal's data structure to a purely functional setting. In doing so, we both simplify the data structure and clarify its relationship to the binomial queues of Vuillemin, which support all four operations in O(log n) time. Specifically, we derive our implementation from binomial queues in three steps......: first, we reduce the running time of insert to O(1) by eliminating the possibility of cascading links; second, we reduce the running time of findMin to O(1) by adding a global root to hold the minimum element; and finally, we reduce the running time of meld to O(1) by allowing priority queues to contain...
Strongly coupled inorganic-nano-carbon hybrid materials for energy storage.
Wang, Hailiang; Dai, Hongjie
2013-04-07
The global shift of energy production from fossil fuels to renewable energy sources requires more efficient and reliable electrochemical energy storage devices. In particular, the development of electric or hydrogen powered vehicles calls for much-higher-performance batteries, supercapacitors and fuel cells than are currently available. In this review, we present an approach to synthesize electrochemical energy storage materials to form strongly coupled hybrids (SC-hybrids) of inorganic nanomaterials and novel graphitic nano-carbon materials such as carbon nanotubes and graphene, through nucleation and growth of nanoparticles at the functional groups of oxidized graphitic nano-carbon. We show that the inorganic-nano-carbon hybrid materials represent a new approach to synthesize electrode materials with higher electrochemical performance than traditional counterparts made by simple physical mixtures of electrochemically active inorganic particles and conducting carbon materials. The inorganic-nano-carbon hybrid materials are novel due to possible chemical bonding between inorganic nanoparticles and oxidized carbon, affording enhanced charge transport and increased rate capability of electrochemical materials without sacrificing specific capacity. Nano-carbon with various degrees of oxidation provides a novel substrate for nanoparticle nucleation and growth. The interactions between inorganic precursors and oxidized-carbon substrates provide a degree of control over the morphology, size and structure of the resulting inorganic nanoparticles. This paper reviews the recent development of inorganic-nano-carbon hybrid materials for electrochemical energy storage and conversion, including the preparation and functionalization of graphene sheets and carbon nanotubes to impart oxygen containing groups and defects, and methods of synthesis of nanoparticles of various morphologies on oxidized graphene and carbon nanotubes. We then review the applications of the SC
Organic-inorganic membranes for filtration of corn distillery
Directory of Open Access Journals (Sweden)
Myronchuk Valeriy G.
2016-01-01
Full Text Available Organic-inorganic membranes were obtained by modification of polymer microfiltration membrane with inorganic ion-exchangers, which form secondary porosity inside macroporous substrate (zirconium hydrophosphate or simultaneously in the macroporous substrate and active layer, depending of the particle size (from ≈50 nm up to several microns. Precipitation of the inorganic constituent is considered from the point of view of Ostwald-Freundlich equation. Such processes as pressing test in deionized water and filtration of corn distillery at 1-6 bar were investigated. Theoretical model allowing to establish fouling mechanism, was applied. It was found that the particles both in the substrate and active layer prevent fouling of the membrane with organics and provide rejection of colloidal particles.
A Mathematical Analysis of Air Traffic Priority Rules
Nakawicz, Anthony J.; Munoz, Cesar A.; Maddalon, Jeffrey M.
2012-01-01
This paper analyzes priority rules, such as those in Part 91.113 of the Federal Aviation Regulations. Such rules determine which of two aircraft should maneuver in a given conflict scenario. While the rules in 91.113 are well accepted, other concepts of operation for NextGen, such as self separation, may allow for different priority rules. A mathematical framework is presented that can be used to analyze a general set of priority rules and enables proofs of important properties. Specific properties considered in this paper include safety, effectiveness, and stability. A set of rules is said to be safe if it ensures that it is never the case that both aircraft have priority. They are effective if exactly one aircraft has priority in every situation. Finally, a set of rules is called stable if it produces compatible results even under small changes to input data.
Directory of Open Access Journals (Sweden)
C. Leng
2016-07-01
Full Text Available A historic haze event, characterized by lengthy, large-scale and severe pollution, occurred in the Yangtze River Delta (YRD of China from 1 to 10 December 2013. This haze event significantly influenced air quality throughout the region, especially in urban areas. Aerosol physical, chemical and optical properties were measured in Shanghai. Sometimes the 1 h average particle concentration (e.g., PM2.5 exceeded 600 µg m−3. Inorganic water-soluble ions in particles, trace gases and aerosol optical coefficients had a similar tendency to increase evidently from clear to hazy episodes. A combination of various factors contributed to the formation and evolution of the haze event, among which meteorological conditions, local anthropogenic emissions and pollutants are the major factors. High pressure system, calm surface wind and subsidence airflow were responsible for the decrease of planetary boundary layer (PBL and the accumulation of pollutants. Atmospheric visibility correlated strongly with relative humidity (RH, particle number in size of 600–1400 nm other than particulate water-soluble species and particle mass (PM2.5. The particle hygroscopicity plays an important role in atmospheric visibility reduction. The results are somewhat helpful to forecast and eliminate regional atmospheric pollution in China.
Advanced Polymeric and Organic–Inorganic Membranes for Pressure-Driven Processes
Le, Ngoc Lieu; Phuoc, Duong; Nunes, Suzana Pereira
2017-01-01
The state-of-the-art of membranes for reverse osmosis, nanofiltration, and gas separation is shortly reviewed, taking in account the most representative examples currently in application. Emphasis is also done on recent developments of advanced polymeric and organic–inorganic materials for pressure-driven processes. Many of the more recent membranes are not only polymeric but also contain an inorganic phase. Tailoring innovative materials with organic and inorganic phases coexisting in a nanoscale with multifunctionalization is an appealing approach to control at the same time diffusivity and gas solubility. Other advanced materials that are now being considered for membrane development are organic or organic–inorganic self-assemblies, metal-organic frameworks, and different forms of carbon fillers.
Advanced Polymeric and Organic–Inorganic Membranes for Pressure-Driven Processes
Le, Ngoc Lieu
2017-02-13
The state-of-the-art of membranes for reverse osmosis, nanofiltration, and gas separation is shortly reviewed, taking in account the most representative examples currently in application. Emphasis is also done on recent developments of advanced polymeric and organic–inorganic materials for pressure-driven processes. Many of the more recent membranes are not only polymeric but also contain an inorganic phase. Tailoring innovative materials with organic and inorganic phases coexisting in a nanoscale with multifunctionalization is an appealing approach to control at the same time diffusivity and gas solubility. Other advanced materials that are now being considered for membrane development are organic or organic–inorganic self-assemblies, metal-organic frameworks, and different forms of carbon fillers.
International Nuclear Information System (INIS)
Verliefde, Arne; Cornelissen, Emile; Amy, Gary; Bruggen, Bart van der; Dijk, Hans van
2007-01-01
The occurrence of organic micropollutants in ground- and surface waters has become an important concern for the drinking water industry, mainly because of possible related health effects. Due to the polar nature of some of these pollutants, they are not completely removed by traditional water treatment barriers. This paper offers an overview of priority organic micropollutants and their occurrence in Flemish and Dutch water sources. Furthermore, rejection by nanofiltration is qualitatively predicted for the selected priority micropollutants. The qualitative prediction is based on the values of key solute and membrane parameters in nanofiltration. Predicted values are then compared with experimental values obtained from literature. Overall, the qualitative predictions are roughly in agreement with literature values. Prediction based on key parameters may thus prove to be a very quick and useful technique to assess the implementation of nanofiltration as a treatment step for organic micropollutants in drinking water plant design. - The article provides a quick and powerful prediction tool for the removal of organic micropollutants by nanofiltration, based on readily available parameter values
Sun, X.; Cheng, S.
2017-12-01
This paper presents the first attempt to investigate the emission source control of the Middle Reaches of Yangtze River Urban Agglomerations (MRYRUA), one of the national urban agglomerations in China. An emission inventory of the MRYRUA was the first time to be developed as inputs to the CAMx model based on county-level activity data obtained by full-coverage investigation and source-based spatial surrogates. The emission inventory was proved to be acceptable owing to the atmospheric modeling verification. A classification technology method for atmospheric pollution source priority control was the first time to be introduced and applied in the MRYRUA for the evaluation of the emission sources control on the region-scale and city-scale. MICAPS (Meteorological Information comprehensive Analysis and Processing System) was applied for the regional meteorological condition and sensitivity analysis. The results demonstrated that the emission sources in the Hefei-center Urban Agglomerations contributed biggest on the mean PM2.5 concentrations of the MRYRUA and should be taken the priority to control. The emission sources in the Ma'anshan city, Xiangtan city, Hefei city and Wuhan city were the bigger contributors on the mean PM2.5 concentrations of the MRYRUA among the cities and should be taken the priority to control. In addition, the cities along the Yangtze River and the tributary should be given the special attention for the regional air quality target attainments. This study provide a valuable preference for policy makers to develop effective air pollution control strategies.
Voigt, Isabel; Wrede, Jennifer; Diederichs-Egidi, Heike; Dierks, Marie-Luise; Junius-Walker, Ulrike
2010-12-01
To ascertain health priorities of older patients and treatment priorities of their general practitioners (GP) on the basis of a geriatric assessment and to determine the agreement between these priorities. The study included a sample of 9 general practitioners in Hannover, Germany, and a stratified sample of 35 patients (2-5 patients per practice, 18 female, average age 77.7 years). Patients were given a geriatric assessment using the Standardized Assessment for Elderly Patients in Primary Care (STEP) to gain an overview of their health and everyday problems. On the basis of these results, patients and their physicians independently rated the importance of each problem disclosed by the assessment. Whereas patients assessed the importance for their everyday lives, physicians assessed the importance for patients' medical care and patients' everyday lives. Each patient had a mean ± standard deviation of 18 ± 9.2 health problems. Thirty five patients disclosed a total of 634 problems; 537 (85%) were rated by patients and physicians. Of these 537 problems, 332 (62%) were rated by patients and 334 (62%) by physicians as important for patients' everyday lives. In addition, 294 (55%) were rated by physicians as important for patients' medical care. Although these proportions of important problems were similar between patients and physicians, there was little overlap in the specific problems that each group considered important. The chance-corrected agreement (Cohen κ) between patients and physicians on the importance of problems for patients' lives was low (κ=0.23). Likewise, patients and physicians disagreed on the problems that physicians considered important for patients' medical care (κ=0.18, Ppriorities between patients and physicians necessitates better communication between the two parties to strengthen mutual understanding.
Basílico, Gabriel; Magdaleno, Anahí; Paz, Marta; Moretton, Juan; Faggi, Ana; de Cabo, Laura
2017-04-01
The discharge of sewage effluents into low-order streams has negative effects on water quality. Macrophytes can be efficient in the treatment of this wastewater due to the removal of the main pollutants. The genotoxicity of sewage-polluted water discharging into La Choza stream was evaluated by testing with Allium cepa. Also, a phytoremediation assay with continuous recirculation of the residual water was conducted for 12 days. Three treatments were carried out. One treatment (Hr) was performed with a macrophyte (Hydrocotyle ranunculoides), and two treatments were conducted without macrophytes: with lighting (Ai) and without lighting (Ao). The wastewater was toxic according to all the evaluated indexes (mitotic index, frequency of chromosomal aberrations and micronucleus). High concentrations of ammonium, dissolved inorganic nitrogen (DIN), total (TP) and soluble reactive phosphorous (SRP) and indicators of faecal contamination were determined in the wastewater. The ammonium, DIN, SRP and TP loads at the end of the assay were significantly lower in the treatments with light (Hr and Ai). So, the nutrient removal was due to their absorption and adsorption by the periphyton and H. ranunculoides. Our results lead us to recommend the maintenance and planting of macrophytes in lowland streams subject to sewage pollution.
van Middendorp, J J; Allison, H C; Ahuja, S; Bracher, D; Dyson, C; Fairbank, J; Gall, A; Glover, A; Gray, L; Masri, W El; Uttridge, A; Cowan, K
2016-05-01
This is a mixed-method consensus development project. The objective of this study was to identify a top ten list of priorities for future research into spinal cord injury (SCI). The British Spinal Cord Injury Priority Setting Partnership was established in 2013 and completed in 2014. Stakeholders included consumer organisations, healthcare professional societies and caregivers. This partnership involved the following four key stages: (i) gathering of research questions, (ii) checking of existing research evidence, (iii) interim prioritisation and (iv) a final consensus meeting to reach agreement on the top ten research priorities. Adult individuals with spinal cord dysfunction because of trauma or non-traumatic causes, including transverse myelitis, and individuals with a cauda equina syndrome (henceforth grouped and referred to as SCI) were invited to participate in this priority setting partnership. We collected 784 questions from 403 survey respondents (290 individuals with SCI), which, after merging duplicate questions and checking systematic reviews for evidence, were reduced to 109 unique unanswered research questions. A total of 293 people (211 individuals with SCI) participated in the interim prioritisation process, leading to the identification of 25 priorities. At a final consensus meeting, a representative group of individuals with SCI, caregivers and health professionals agreed on their top ten research priorities. Following a comprehensive, rigorous and inclusive process, with participation from individuals with SCI, caregivers and health professionals, the SCI research agenda has been defined by people to whom it matters most and should inform the scope and future activities of funders and researchers for the years to come. The NIHR Oxford Biomedical Research Centre provided core funding for this project.
AKSU, Ali Engin
2014-01-01
The extent of marine pollution in İzmir Bay is investigated using inorganic and organic geochemical data from surface sediments. The concentrations of 42 elements in 84 samples established that surface sediments in Inner İzmir Bay display significant enrichments in Ag, As, Cd, Cr, Cu, Hg, Mo, P, Pb, Sb, Sn, V, and Zn, associated with notably high concentrations of total organic carbon and sulphur. Organic geochemical data in 14 samples from Inner İzmir Bay showed that these sediments...
THE MOST IMPORTANT POLLUTANTS OF EASTERN SLOVAKIA WATERS
Directory of Open Access Journals (Sweden)
Tatiana Hrušková
2014-10-01
Full Text Available As the area of the Slovak Republic is 49,036 km², there are many potential contaminants that can affect its population. In the socialist era the town of Strážske located in the Košice Municipal Region was the centre of production of polychlorinated biphenyls (PCB inter alia and nowadays about 3,500 metric tonnes of PCB are persisting there and present the greatest PCB environmental risk in the central Europe. The heavy metal contamination in Slovakia is caused by the natural background as well as by the former mining activities. In Slovakia there are about 17 thousand old mining works, i.e. adits, stocks, and impoundments. Contamination of the ground and surface waters in the Spiš–Gemer Ore Mountain (SGOM area is caused by mine drainage. Arsenic, antimony, copper, mercury, cadmium, and zinc are the main pollutants of natural waters. All contaminated areas are currently monitored according to the national and EU legislation and nutrient load reduction programmes. As a result of this the level of inorganic and organic micropollutants in surface water and water reservoirs will be reduced together with the negative impact of water pollution on the environment in Eastern Slovakia region.
Global Priorities for Marine Biodiversity Conservation
Selig, Elizabeth R.; Turner, Will R.; Troëng, Sebastian; Wallace, Bryan P.; Halpern, Benjamin S.; Kaschner, Kristin; Lascelles, Ben G.; Carpenter, Kent E.; Mittermeier, Russell A.
2014-01-01
In recent decades, many marine populations have experienced major declines in abundance, but we still know little about where management interventions may help protect the highest levels of marine biodiversity. We used modeled spatial distribution data for nearly 12,500 species to quantify global patterns of species richness and two measures of endemism. By combining these data with spatial information on cumulative human impacts, we identified priority areas where marine biodiversity is most and least impacted by human activities, both within Exclusive Economic Zones (EEZs) and Areas Beyond National Jurisdiction (ABNJ). Our analyses highlighted places that are both accepted priorities for marine conservation like the Coral Triangle, as well as less well-known locations in the southwest Indian Ocean, western Pacific Ocean, Arctic and Antarctic Oceans, and within semi-enclosed seas like the Mediterranean and Baltic Seas. Within highly impacted priority areas, climate and fishing were the biggest stressors. Although new priorities may arise as we continue to improve marine species range datasets, results from this work are an essential first step in guiding limited resources to regions where investment could best sustain marine biodiversity. PMID:24416151
Global priorities for marine biodiversity conservation.
Directory of Open Access Journals (Sweden)
Elizabeth R Selig
Full Text Available In recent decades, many marine populations have experienced major declines in abundance, but we still know little about where management interventions may help protect the highest levels of marine biodiversity. We used modeled spatial distribution data for nearly 12,500 species to quantify global patterns of species richness and two measures of endemism. By combining these data with spatial information on cumulative human impacts, we identified priority areas where marine biodiversity is most and least impacted by human activities, both within Exclusive Economic Zones (EEZs and Areas Beyond National Jurisdiction (ABNJ. Our analyses highlighted places that are both accepted priorities for marine conservation like the Coral Triangle, as well as less well-known locations in the southwest Indian Ocean, western Pacific Ocean, Arctic and Antarctic Oceans, and within semi-enclosed seas like the Mediterranean and Baltic Seas. Within highly impacted priority areas, climate and fishing were the biggest stressors. Although new priorities may arise as we continue to improve marine species range datasets, results from this work are an essential first step in guiding limited resources to regions where investment could best sustain marine biodiversity.
Human Exposure and Health Effects of Inorganic and Elemental Mercury
Park, Jung-Duck; Zheng, Wei
2012-01-01
Mercury is a toxic and non-essential metal in the human body. Mercury is ubiquitously distributed in the environment, present in natural products, and exists extensively in items encountered in daily life. There are three forms of mercury, i.e., elemental (or metallic) mercury, inorganic mercury compounds, and organic mercury compounds. This review examines the toxicity of elemental mercury and inorganic mercury compounds. Inorganic mercury compounds are water soluble with a bioavailability o...
Environmental Pollution: Noise Pollution - Sonic Boom
1977-06-01
UNCLASSIFIED AD-A041 400 DDC/BIB-77/06 ENVIRONMENTAL POLLUTION NOISE POLLUTION SONIC BOOM A DDC BIBLIOGRAPHY DDC-TAS Cameron Station Alexandria, Va...rn7Sttio 658S-A041 400 4 TITLE xand r.VuhtlVlia) 2 TA i b- 1iblog ra ph y ENVIRONMENTAL POLLUTION : --. Apr-l IM59-Jul, 7NOISE POLLUTION -SONIC BOOM. 1,976...BIBLIOGRAPHY SEARCH CONTROL NO. /2OM09 AD- 769 970 20/1 1/3 DEFENSE UOCUMENTATION CENTER ALEXANDRIA VA ENVIRONMENTAL POLLUTION : NOISE POLLUTION
Appraisal of Priority Sector Lending by Commercial Banks in India
C Bhujanga Rao
2014-01-01
This report provides an overview of the performance of priority sector lending by commercial banks in India. The review captures the changing contours of Reserve Bank of India policy on priority sector advances. The paper analyses the trends in priority sector lending for the period 1995-2011, the burden of non-performing assets of commercial bank in priority sector lending and the extent to which priority sector targets are achieved by individual banks. It is observed that the scheduled comm...
DEFF Research Database (Denmark)
Albertsen, Andreas
2017-01-01
recently and the preliminary reports indicate increased donation rates. How should we evaluate such initiatives from an ethical perspective? Luck egalitarianism, a responsibility-sensitive approach to distributive justice, provides one possible justification: Those who decide against being organ donors...... limit the health care resources available to others. As such, a priority rule can be justified by a luck egalitarian approach to distributive justice. Furthermore, a priority rule inspired by luck egalitarianism is well equipped to avoid prominent criticisms of such a procurement system. Luck...
Phylogenetic relatedness predicts priority effects in nectar yeast communities
Peay, Kabir G.; Belisle, Melinda; Fukami, Tadashi
2012-01-01
Priority effects, in which the outcome of species interactions depends on the order of their arrival, are a key component of many models of community assembly. Yet, much remains unknown about how priority effects vary in strength among species in a community and what factors explain this variation. We experimented with a model natural community in laboratory microcosms that allowed us to quantify the strength of priority effects for most of the yeast species found in the floral nectar of a hummingbird-pollinated shrub at a biological preserve in northern California. We found that priority effects were widespread, with late-arriving species experiencing strong negative effects from early-arriving species. However, the magnitude of priority effects varied across species pairs. This variation was phylogenetically non-random, with priority effects stronger between closer relatives. Analysis of carbon and amino acid consumption profiles indicated that competition between closer relatives was more intense owing to higher ecological similarity, consistent with Darwin's naturalization hypothesis. These results suggest that phylogenetic relatedness between potential colonists may explain the strength of priority effects and, as a consequence, the degree to which community assembly is historically contingent. PMID:21775330
Qiao, Ting; Zhao, Mengfei; Xiu, Guangli; Yu, Jianzhen
2016-07-01
A year-long simultaneous observation of PM1 and PM2.5 were conducted at ECUST campus in Shanghai, the compositions were analyzed and compared. Results showed that PM2.5 was dominated by PM1 on clear days while the contribution of PM1-2.5 to PM2.5 increased on haze days, indicating that PM2.5 should be given priority to characterize or predict haze pollution. On haze days, accumulation of organic carbon (OC), elemental carbon (EC) and primary organic carbon (POC) in PM1-2.5 was faster than that in PM1. Humic-like substances carbon (Hulis-C) in both PM2.5 and PM1 formed faster than water soluble organic carbon (WSOC) on haze days, hence Hulis-C/WSOC increased with the intensification of haze pollution. In terms of water soluble ions, NO3(-)/SO4(2-) in PM1 increased with the aggravation of haze pollution, implying that mobile sources dominated on haze days, so is nitrogen oxidation ratio (NOR). Liquid water content (LWC) in both PM1 and PM2.5 had positive correlations with relative humidity (RH) but negative correlations with visibility, implying that hygroscopic growth might be a factor for visibility impairment, especially LWC in PM1. By comparison with multi-linear equations of LWC in PM1 and PM2.5, NO3(-) exerted a higher influence on hygroscopicity of PM1 than PM2.5, while RH, WSOC, SO4(2-) and NH4(+) had higher effects on PM2.5, especially WSOC. Source apportionment of PM2.5 was also investigated to provide reference for policy making. Cluster analysis by HYSPLIT (HYbrid Single Particle Lagrangian Integrated Trajectory) model showed that PM2.5 originated from marine aerosols, middle-scale transportation and large-scale transportation. Furthermore, PM2.5 on haze days was dominated by middle-scale transportation. In line with source apportionment by positive matrix factorization (PMF) model, PM2.5 was attributed to secondary inorganics, aged sea salt, combustion emissions, hygroscopic growth and secondary organics. Secondary formation was the principle source of
Does the determination of inorganic arsenic in rice depend on the method?
DEFF Research Database (Denmark)
de la Calle, Maria Beatriz; Emteborg, Håkan; Linsinger, Thomas P.J.
2011-01-01
, on the determination of total and inorganic arsenic (As) in rice. The main aim of this PT was to judge the state of the art of analytical capability for the determination of total and inorganic As in rice. For this reason, participation in this exercise was open to laboratories from all over the world. Some 98...... laboratories reported results for total As and 32 for inorganic As. The main conclusions of IMEP-107 were that the concentration of inorganic As determined in rice does not depend on the analytical method applied and that introduction of a maximum level for inorganic As in rice should not be postponed because...
Inorganic Analytical Chemistry
DEFF Research Database (Denmark)
Berg, Rolf W.
The book is a treatise on inorganic analytical reactions in aqueous solution. It covers about half of the elements in the periodic table, i.e. the most important ones : H, Li, B, C, N, O, Na, Mg, Al, P, S, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Se, Br, Sr, Mo, Ag, Cd, Sn, Sb, I, Ba, W,...
Priority setting for existing chemicals : automated data selection routine
Haelst, A.G. van; Hansen, B.G.
2000-01-01
One of the four steps within Council Regulation 793/93/EEC on the evaluation and control of existing chemicals is the priority setting step. The priority setting step is concerned with selecting high-priority substances from a large number of substances, initially starting with 2,474
Department of the Interior — This document lists the Natural Resource Program Center’s priority ServCat documents. It is recommended that these documents- which include annual narrative reports,...
Ground water pollution through air pollutants
International Nuclear Information System (INIS)
Cichorowski, G.; Michel, B.; Versteegen, D.; Wettmann, R.
1989-01-01
The aim of the investigation is to determine the significance of air pollutants for ground water quality and ground water use. The report summarizes present knowledge and assesses statements with a view to potential ground water pollution from the air. In this context pollution paths, the spreading behaviour of pollutants, and 'cross points' with burden potentials from other pollutant sources are presented. (orig.) [de
Gössler , Gregor; Sifakis , Joseph
2004-01-01
Projet POP_ART; We present a framework for the incremental construction of deadlock-free systems meeting given safety properties. The framework borrows concepts and basic results from the controller synthesis paradigm by considering a step in the construction process as a controller synthesis problem. We show that priorities are expressive enough to represent restrictions induced by deadlock-free controllers preserving safety properties. We define a correspondence between such restrictions an...
Montoro Leal, P; Vereda Alonso, E; López Guerrero, M M; Cordero, M T Siles; Cano Pavón, J M; García de Torres, A
2018-07-01
Arsenic, one of the main environmental pollutants and potent natural poison, is a chemical element that is spread throughout the Earth's crust. It is well known that the toxicity of arsenic is highly dependent on its chemical forms. Generally, the inorganic species are more toxic than its organics forms, and As(III) is 60 times more toxic than As(V). In environmental waters, arsenic exists predominantly in two chemical forms: As(III) and As(V). In view of these facts, fast, sensitive, accurate and simple analytical methods for the speciation of inorganic arsenic in environmental waters are required. In this work, a new magnetic solid phase extraction with a hydride generation system was coupled on line with inductively coupled plasma mass spectrometry (MSPE-HG-ICP-MS). The new system was based on the retention of As(III) and As(V) in two knotted reactors filled with (Fe 3 O 4 ) magnetic nanoparticles functionalized with [1,5-bis (2-pyridyl) 3-sulfophenylmethylene] thiocarbonohydrazide (PSTH-MNPs). As(III) and total inorganic As were sequentially eluted in different reduction conditions. The concentration of As(V) was obtained by subtracting As(III) from total As. The system runs in a fully automated way and the method has proved to have a wide linear range and to be precise, sensitive and fast. The detection limits found were 2.7 and 3.2 ng/L for As(III) and total As, respectively; with relative standard deviations (RSDs) of 2.5% and 2.7% and a sample throughput of 14.4 h -1 . In order to validate the developed method, several certified reference samples of environmental waters including sea water, were analyzed and the determined values were in good agreement with the certified values. The proposed method was successfully applied to the speciation analysis of inorganic arsenic in well-water and sea water. Copyright © 2018 Elsevier B.V. All rights reserved.