WorldWideScience

Sample records for innovative technology evaluation

  1. MINERGY CORPORATION GLASS FURNACE TECHNOLOGY EVALUATION: INNOVATION TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    This report presents performance and economic data for a U.S. Environmental Protection Agency (EPA) Superfund Innovative Technology Evaluation (SITE) Program demonstration of the Minergy Corporation (Minergy) Glass Furnace Technology (GFT). The demonstration evaluated the techno...

  2. GENERAL ENVIRONMENTAL CORPORATION; CURE ELECTROCOAGULATION TECHNOLOGY: INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    The CURE electrocoagulation technology was demonstrated under the Superfund Innovative Technology Evaluation (SITE) program at the U.S. Department of Energy (DOE) Rocky Flats Environmental Technology Site (RFETS), where water from the solar evaporation ponds (SEPs) was contaminat...

  3. TEXACO GASIFICATION PROCESS - INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    This report summarizes the evaluation of the Texaco Gasification Process (TGP) conducted under the U.S. Environmental Protection Agency (EPA) Superfund Innovative Technology Evaluation (SITE) Program. The Texaco Gasification Process was developed by Texaco Inc. The TGP is a comm...

  4. HIGH VOLTAGE ENVIRONMENTAL APPLICATIONS, INC.ELECTRON BEAM TECHNOLOGY - INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    This report evaluates a high-voltage electron beam (E-beam) technology's ability to destroy volatile organic compounds (VOCs) and other contaminants present in liquid wastes. Specifically, this report discusses performance and economic data from a Superfund Innovative Technology...

  5. Group Innovation Ability of Agricultural Technological Innovation Strategic Alliance

    Institute of Scientific and Technical Information of China (English)

    Chishun; MA; Jintian; YU

    2013-01-01

    Agricultural technological innovation strategic alliance, as an important form of strategic alliance, has steadily strengthened the collaborative management among organizations and raised competitive power with the backing of improved group innovation ability. This article studies innovation ability from individual innovation ability to the group innovation ability. Firstly, basic connotation of group innovation ability is to be concluded through the comparison of individual and group innovation ability. Secondly, evaluation index system is to be established based on the influencing factors of the group innovation ability of agricultural technological innovation strategic alliance and evaluation is based on three dimensions, namely organization technological innovation ability, alliance collaborative innovation ability as well as innovation environment. Furthermore, basic methods for promoting the group innovation ability of alliance are to be proposed.

  6. SANDIA NATIONAL LABORATORIES IN SITU ELECTROKINETIC EXTRACTION TECHNOLOGY; INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    As a part of the Superfund Innovative Technology Evaluation (SITE) Program, the U.S. Environmental Protection Agency evaluated the In-Situ Electrokinetic Extraction (ISEE) system at Sandia National Laboratories, Albuquerque, New Mexico.The SITE demonstration results show ...

  7. Health technology assessment. Evaluation of biomedical innovative technologies.

    Science.gov (United States)

    Turchetti, Giuseppe; Spadoni, Enza; Geisler, Eliezer Elie

    2010-01-01

    This article describes health technology assessment (HTA) as an evaluation tool that applies systematic methods of inquiry to the generation and use of health technologies and new products. The focus of this article is on the contributions of HTA to the management of the new product development effort in the biomedical organization. Critical success factors (CSFs) are listed, and their role in assessing success is defined and explained. One of the conclusions of this article is that HTA is a powerful tool for managers in the biomedical sector, allowing them to better manage their innovation effort in their continuing struggle for competitiveness and survival.

  8. 1992 update of US EPA's Superfund Innovative Technology Evaluation (SITE) Emerging Technology Program

    International Nuclear Information System (INIS)

    Lewis, N.M.; Barkley, N.P.; Williams, T.

    1992-01-01

    The Superfund Innovative Technology Evaluation (SITE) Emerging Technology Program (ETP) has financially supported further development of bench- and pilot-scale testing and evaluation of innovative technologies for use at hazardous waste sites for five years. The ETP was established under the Superfund Amendments and Reauthorization Act (SARA) of 1986. The ETP complies with the goal of the SITE Program to promote, accelerate and make commercially available the development of alternative/innovative treatment technologies for use at Superfund sites. Technologies are submitted to the ETP through yearly solicitations for Preproposals. Applicants are asked to submit a detailed project proposal and a cooperative agreement application that requires Developer/EPA cost sharing. EPA co-funds selected Developers for one to two years. Second-year funding requires documentation of significant progress during the first year. Facilities, equipment, data collection, performance and development are monitored throughout the project. The US Department of Energy (DOE) and the US Air Force (USAF) are participants in the ETP. DOE has co-funded ETP projects since 1990 and the USAF since 1991. A goal of the ETP is to move developed technologies to the field-demonstration stage. A developer may be considered for participation in the SITE Demonstration Program if performance in the ETP indicates the technology is field-ready for evaluation. Six technology categories: biological, chemical, materials handling, physical, solidification/stabilization and thermal, are presently in the ETP. Technologies of primary interest to EPA are those that can treat complex mixtures of hazardous organic and inorganic contaminants and provide improved solids handling and/or pretreatment. An account of the background and progress of the ETP's first five years is presented in this paper. Technologies currently in the ETP are noted, and developers and EPA Project Managers, are listed. 4 refs., 11 figs., 6 tabs

  9. The Kyoto mechanisms and technological innovation

    DEFF Research Database (Denmark)

    Lund, Henrik

    2006-01-01

    Climate change response, including the implementation of the Kyoto targets as the first step, calls for technological innovation of future sustainable energy systems. Based on the Danish case, this paper evaluates the type of technological change necessary. During a period of 30 years, Denmark...... countries. Consequently, the innovative technological development has changed. This paper evaluates the character of such change and makes preliminary recommendations for policies to encourage the use of the Kyoto Mechanisms as an acceleration of the necessary technological innovation....

  10. Carbon capture and sequestration (CCS) technological innovation system in China: Structure, function evaluation and policy implication

    International Nuclear Information System (INIS)

    Lai Xianjin; Ye Zhonghua; Xu Zhengzhong; Husar Holmes, Maja; Henry Lambright, W.

    2012-01-01

    Carbon capture and sequestration (CCS) can be an important technology option for China in addressing global climate change and developing clean energy technologies. Promoted by international climate conventions and supported by government research and development programs, an increasing number of CCS pilot and demonstration projects have been launched in China. In this study, we analyze the structure of China’s CCS effort from a technological innovation system (TIS) perspective. Within this system, key socio-political components, including institutions, actor-networks, and technology development, are examined to evaluate the state of the innovation system. The study assessed the perceived capacity of seven functional areas of the CCS innovation system through a survey of key CCS actors and stakeholders. The findings suggest that China’s CCS innovation system has a strong functional capacity for knowledge and technology development. It is significantly weaker in the innovative functions of knowledge diffusion, market formation, facilitating entrepreneurs and new entrants into the CCS market. Based on the evaluation of China’s technological innovation system to develop CCS, the article articulates specific public policies to formulate a more robust innovation system to traverse the “valley of death” from research and development to commercial deployment and accelerate energy innovation in China. - Highlights: ► We analyze and evaluate China’s CCS innovation system from TIS perspective. ► Strong and systematic CCS innovation system structure has come into being in China. ► The system has acquired high knowledge development and accumulation. ► Weak innovation functions are identified: market creation, guidance, etc. ► Public policies are needed to improve the innovation system performance.

  11. Review and evaluation of innovative technologies for measuring diet in nutritional epidemiology.

    Science.gov (United States)

    Illner, A-K; Freisling, H; Boeing, H; Huybrechts, I; Crispim, S P; Slimani, N

    2012-08-01

    The use of innovative technologies is deemed to improve dietary assessment in various research settings. However, their relative merits in nutritional epidemiological studies, which require accurate quantitative estimates of the usual intake at individual level, still need to be evaluated. To report on the inventory of available innovative technologies for dietary assessment and to critically evaluate their strengths and weaknesses as compared with the conventional methodologies (i.e. Food Frequency Questionnaires, food records, 24-hour dietary recalls) used in epidemiological studies. A list of currently available technologies was identified from English-language journals, using PubMed and Web of Science. The search criteria were principally based on the date of publication (between 1995 and 2011) and pre-defined search keywords. Six main groups of innovative technologies were identified ('Personal Digital Assistant-', 'Mobile-phone-', 'Interactive computer-', 'Web-', 'Camera- and tape-recorder-' and 'Scan- and sensor-based' technologies). Compared with the conventional food records, Personal Digital Assistant and mobile phone devices seem to improve the recording through the possibility for 'real-time' recording at eating events, but their validity to estimate individual dietary intakes was low to moderate. In 24-hour dietary recalls, there is still limited knowledge regarding the accuracy of fully automated approaches; and methodological problems, such as the inaccuracy in self-reported portion sizes might be more critical than in interview-based applications. In contrast, measurement errors in innovative web-based and in conventional paper-based Food Frequency Questionnaires are most likely similar, suggesting that the underlying methodology is unchanged by the technology. Most of the new technologies in dietary assessment were seen to have overlapping methodological features with the conventional methods predominantly used for nutritional epidemiology. Their

  12. DEMONSTRATION OF AQUAFIX AND SAPS PASSIVE MINE WATER TREATMENT TECHNOLOGIES AT SUMMITVILLE MINE SITE, INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    As part of the Superfund Innovative Technology Evaluation (SITE) Program, the U.S. Environmental Protection Agency evaluated two passive water treatment (PWT) technologies for metals removal from acid mine drainage (AMD) at the Summitville Mine Superfund Site in southern Colorado...

  13. Composite science and technology innovation index

    International Nuclear Information System (INIS)

    2011-02-01

    This book reports the composite science and technology innovation index with the purpose, process, conception and, the method of evaluation. It also indicates the result of composite science and technology innovation index in 2010, which itemizes the result according to resource, activity network, environment and outcome. The last part records analysis of science and technology innovation in Korea and development plan with various analysis.

  14. IN SITU STEAM ENHANCED RECOVERY PROCESS - HUGHES ENVIRONMENTAL SYSTEMS, INC. - INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    This Innovative Technology Evaluation report summarizes the findings of an evaluation of the in situ Steam Enhanced Recovery Process (SERP) operated by Hughes Environmental Systems, Inc. at the Rainbow Disposal facility in Huntington Beach, California. he technology demonstration...

  15. A hybrid MCDM framework combined with DEMATEL-based ANP to evaluate enterprise technological innovation capabilities assessment

    Directory of Open Access Journals (Sweden)

    Meng-Jong Kuan

    2014-08-01

    Full Text Available The efficient evaluation of technological innovation capabilities of enterprises is an important factor to enhance competitiveness. This paper aims to assess and to rank technological innovation evaluation criteria in order to provide a practical insight of systematic analysis by gathering the qualified experts’ opinions combined with three methods of multi-criteria decision making approach. A framework is proposed and uses a novel hybrid multiple criteria decision-making (MCDM model to address the dependence relationships of criteria with the aid of the Decision-Making Trial and Evaluation Laboratory (DEMATEL, analytical network process (ANP and VIKOR (VlseKriterijumska Optimizacija I Kompromisno Resenje. The study reports that the interaction between criteria is essential and influences technological innovation capabilities; furthermore, this ranking development of technological innovation capabilities assessment is also one of key management tools for managements of other related high- tech enterprises. Managers can then judge the need to improve and determine which criteria provide the most effective direction towards improvement.

  16. The Center for Environmental Technology Innovative Technology Screening Process

    International Nuclear Information System (INIS)

    Bertrand, C.M.

    1995-02-01

    The Center for Environmental Technology's (CET) mission is to provide a fully integrated system for accelerated evaluation, development, commercialization, and public acceptance of creative environmental solutions which match the foremost demands in today's environmentally sensitive world. In short, CET will create a means to provide quick, effective solutions for environmental needs. To meet this mission objective, CET has created a unique and innovative approach to eliminating the usual barriers in developing and testing environmental technologies. The approach paves the way for these emerging, cutting-edge technologies by coordinating environmental restoration and waste management activities of industry, universities, and the government to: efficiently and effectively transfer technology to these users, provide market-driven, cost-effective technology programs to the public and DOE, and aid in developing innovative ideas by initiating efforts between DOE facilities and private industry. The central part to this mission is selecting and evaluating specific innovative technologies for demonstration and application at United States Department of Energy (DOE) installations. The methodology and criteria used for this selection, which is called the CET Innovative Technology Screening Process, is the subject of this paper. The selection criteria used for the screening process were modeled after other DOE technology transfer programs and were further developed by CET's Technology Screening and Evaluation Board (TSEB). The process benefits both CET and the proposing vendors by providing objective selection procedures based on predefined criteria. The selection process ensures a rapid response to proposing vendors, all technologies will have the opportunity to enter the selection process, and all technologies are evaluated on the same scale and with identical criteria

  17. The Kyoto mechanisms and technological innovation

    International Nuclear Information System (INIS)

    Lund, Henrik

    2006-01-01

    Climate change response, including the implementation of the Kyoto targets as the first step, calls for technological innovation of future sustainable energy systems. Based on the Danish case, this paper evaluates the type of technological change necessary. During a period of 30 years, Denmark managed to stabilize primary energy supply, and CO 2 emissions decreased by 10%, during a period of 20 years. However, after the introduction of the Kyoto Mechanisms, Denmark has changed its strategy. Instead of continuing the domestic CO 2 emission controls, Denmark plans to buy CO 2 reductions in other countries. Consequently, the innovative technological development has changed. This paper evaluates the character of such change and makes preliminary recommendations for policies to encourage the use of the Kyoto Mechanisms as an acceleration of the necessary technological innovation. (author)

  18. 76 FR 80901 - National Medal of Technology and Innovation Nomination Evaluation Committee

    Science.gov (United States)

    2011-12-27

    ... Nation's highest honor for technological innovation, awarded annually by the President of the United... utilizing technological innovation and/or be familiar with the education, training, employment and... Management/Computing/IT/Manufacturing Innovation; Technological Manpower/Workforce Training/Education. Under...

  19. Wind Technology: A Framework for the Evaluation of Innovations¿ Impacts on the Diffusion Potential

    NARCIS (Netherlands)

    Dinica, V.

    2010-01-01

    This paper proposes a framework based on which innovations in wind power technologies can be evaluated from the standpoint of their contribution to diffusion expansion. The framework helps build up a missing link between the technical literature on innovations and policy-oriented contributions

  20. EPA [Environmental Protection Agency] SITE [Superfund Innovative Technology Evaluation] program seeks technology proposals

    International Nuclear Information System (INIS)

    Anon.

    1989-01-01

    EPA will issue an RFP to initiate the SITE-005 solicitation for demonstration of technologies under the Superfund Innovative Technology Evaluation (SITE) Program. This portion of the SITE program offers a mechanism for conducting a joint technology demonstration between EPA and the private sector. The goal of the demonstration program is to provide an opportunity for developers to demonstrate the performance of their technologies on actual hazardous wastes at Superfund sites, and to provide accurate and reliable data on that performance. Technologies selected must be of commercial scale and provide solutions to problems encountered at Superfund Sites. Primary emphasis in the RFP is on technologies that address: treatment of mixed, low level radioactive wastes in soils and groundwater; treatment of soils and sludges contaminated with organics and/or inorganics, materials handling as a preliminary step to treatment or further processing, treatment trains designed to handle specific wastes, are in situ technologies, especially those processes providing alternatives to conventional groundwater pump and treat techniques

  1. Industrialized Innovation: The Connection of Science & Technology Innovation with Industrial Innovation

    Institute of Scientific and Technical Information of China (English)

    Yinxing Hong; Yao Lu; Jianghuai Zheng

    2017-01-01

    In light of the relationship and the current disconnection between science & technology (S&T) innovation and industrial innovation in China,it is necessary to put forward and emphasize the concept of industrialized innovation.Industrialized innovation is the bridge and intermediation between S&T innovation and industrial innovation,which is not only a concept,but also a mechanism and combination force.There are two ways to achieve industrialized innovation:through industry-university-research coordination and through technology entrepreneurship.The meaning of industry-university-research coordination is not about coordination among industry,university and research sectors in an institutional sense;rather it is about the coordination of the functions of cultivation and development in new industries,new technologies,and new talents of industrialized innovation.The incentive mechanism for industrialized innovation should motivate not only innovation but also coordination.Technology entrepreneurship is the industrialization of new technology through business start-ups,which occurs beyond the stage of incubation and development of new technology.The capital of technology entrepreneurship is the set consisting of knowledge capital manifested through technological innovation,human capital manifested through entrepreneurs,and physical capital in the form of venture capital.While physical capital is indispensable,knowledge capital and human capital play the decisive role in technology entrepreneurship.The industrialization of technological innovation involves two requirements:one is to enable the new technology industry to achieve a large scale rapidly,and the other is to fully realize the potential value of the new technology.Both requirements are reliant on effective innovation in business models.

  2. Innovative and Alternative Technology Assessment Manual

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-02-01

    This four chapter, six appendix manual presents the procedures and methodology as well as the baseline costs and energy information necessary for the analysis and evaluation of innovative and alternative technology applications submitted for federal grant assistance under the innovative and alternative technology provisions of the Clean Water Act of 1977. The manual clarifies and interprets the intent of Congress and the Environmental Protection Agency in carrying out the mandates of the innovative and alternative provisions of the Clean Water Act of 1977. [DJE 2005

  3. Innovation investment area: Technology summary

    Energy Technology Data Exchange (ETDEWEB)

    1994-03-01

    The mission of Environmental Management`s (EM) Office of Technology Development (OTD) Innovation Investment Area is to identify and provide development support for two types of technologies that are developed to characterize, treat and dispose of DOE waste, and to remediate contaminated sites. They are: technologies that show promise to address specific EM needs, but require proof-of-principle experimentation; and (2) already proven technologies in other fields that require critical path experimentation to demonstrate feasibility for adaptation to specific EM needs. The underlying strategy is to ensure that private industry, other Federal Agencies, universities, and DOE National Laboratories are major participants in developing and deploying new and emerging technologies. To this end, about 125 different new and emerging technologies are being developed through Innovation Investment Area`s (IIA) two program elements: RDDT&E New Initiatives (RD01) and Interagency Agreements (RD02). Both of these activities are intended to foster research and development partnerships so as to introduce innovative technologies into other OTD program elements for expedited evaluation.

  4. Innovation investment area: Technology summary

    International Nuclear Information System (INIS)

    1994-03-01

    The mission of Environmental Management's (EM) Office of Technology Development (OTD) Innovation Investment Area is to identify and provide development support for two types of technologies that are developed to characterize, treat and dispose of DOE waste, and to remediate contaminated sites. They are: technologies that show promise to address specific EM needs, but require proof-of-principle experimentation; and (2) already proven technologies in other fields that require critical path experimentation to demonstrate feasibility for adaptation to specific EM needs. The underlying strategy is to ensure that private industry, other Federal Agencies, universities, and DOE National Laboratories are major participants in developing and deploying new and emerging technologies. To this end, about 125 different new and emerging technologies are being developed through Innovation Investment Area's (IIA) two program elements: RDDT ampersand E New Initiatives (RD01) and Interagency Agreements (RD02). Both of these activities are intended to foster research and development partnerships so as to introduce innovative technologies into other OTD program elements for expedited evaluation

  5. Technological Innovation Capabilities and Firm Performance

    OpenAIRE

    Richard C.M. Yam; William Lo; Esther P.Y. Tang; Antonio; K.W. Lau

    2010-01-01

    Technological innovation capability (TIC) is defined as a comprehensive set of characteristics of a firm that facilities and supports its technological innovation strategies. An audit to evaluate the TICs of a firm may trigger improvement in its future practices. Such an audit can be used by the firm for self assessment or third-party independent assessment to identify problems of its capability status. This paper attempts to develop such an auditing framework that can...

  6. Evaluating the enhancement and improvement of China's technology and financial services platform innovation strategy.

    Science.gov (United States)

    Wu, Ching-Sung; Hu, Kuang-Hua; Chen, Fu-Hsiang

    2016-01-01

    The development of high-tech industry has been prosperous around the world in past decades, while technology and finance have already become the most significant issues in the information era. While high-tech firms are a major force behind a country's economic development, it requires a lot of money for the development process, as well as the financing difficulties for its potential problems, thus, how to evaluate and establish appropriate technology and financial services platforms innovation strategy has become one of the most critical and difficult issues. Moreover, how the chosen intertwined financial environment can be optimized in order that high-tech firms financing problems can be decided has seldom been addressed. Thus, this research aims to establish a technology and financial services platform innovation strategy improvement model, as based on the hybrid MADM model, which addresses the main causal factors and amended priorities in order to strengthen ongoing planning. A DEMATEL technique, as based on Analytic Network Process, as well as modified VIKOR, will be proposed for selecting and re-configuring the aspired technology and financial services platform. An empirical study, as based on China's technology and financial services platform innovation strategy, will be provided for verifying the effectiveness of this proposed methodology. Based on expert interviews, technology and financial services platforms innovation strategy improvement should be made in the following order: credit guarantee platform ( C )_credit rating platform ( B )_investment and finance platform ( A ).

  7. Branching innovation, recombinant innovation, and endogenous technological transitions

    NARCIS (Netherlands)

    Frenken, K.; Izquierdo, L.; Zeppini, P.

    2012-01-01

    We propose a model of technological transitions based on two different types of innovations. Branching innovations refer to technological improvements along a particular path, while recombinant innovations represent fusions of multiple paths. Recombinant innovations create "short-cuts" which reduce

  8. Healthcare technology innovation adoption electronic health records and other emerging health information technology innovations

    CERN Document Server

    Daim, Tugrul U; Basoglu, Nuri; Kök, Orhun M; Hogaboam, Liliya

    2016-01-01

    This book aims to study the factors affecting the adoption and diffusion of Health Information Technology (HIT) innovation. It analyzes the adoption processes of various tools and applications, particularly Electronic Health Records (EHR), highlighting the impact on various sectors of the healthcare system, such as physicians, administration,  and patient care, while also identifying the various pitfalls and gaps in the literature. With the various challenges currently facing the United States healthcare system, the study, adoption and diffusion of healthcare technology innovation, particularly HIT, is imperative to achieving national goals. This book is organized into three sections. Section one reviews theories and applications for the diffusion of Health Care Technologies. Section two evaluates EHR technology, including the barriers and enables in adoption and alternative technologies. Finally, section three examines the factors impacting the adoption of EHR systems. This book will be a key source for stu...

  9. COMPOST-FREE BIOREACTOR TREATMENT OF ACID ROCK DRAINAGE LEVIATHAN MINE, CALIFORNIA INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    As part of the Superfund Innovative Technology Evaluation (SITE) program, an evaluation of the compost-free bioreactor treatment of acid rock drainage (ARD) from the Aspen Seep was conducted at the Leviathan Mine Superfund site located in a remote, high altitude area of Alpine Co...

  10. Technology Innovation

    Science.gov (United States)

    EPA produces innovative technologies and facilitates their creation in line with the Agency mission to create products such as the stormwater calculator, remote sensing, innovation clusters, and low-cost air sensors.

  11. Innovative technology demonstrations

    International Nuclear Information System (INIS)

    Anderson, D.B.; Luttrell, S.P.; Hartley, J.N.

    1992-08-01

    Environmental Management Operations (EMO) is conducting an Innovative Technology Demonstration Program for Tinker Air Force Base (TAFB). Several innovative technologies are being demonstrated to address specific problems associated with remediating two contaminated test sites at the base. Cone penetrometer testing (CPT) is a form of testing that can rapidly characterize a site. This technology was selected to evaluate its applicability in the tight clay soils and consolidated sandstone sediments found at TAFB. Directionally drilled horizontal wells was selected as a method that may be effective in accessing contamination beneath Building 3001 without disrupting the mission of the building, and in enhancing the extraction of contamination both in ground water and in soil. A soil gas extraction (SGE) demonstration, also known as soil vapor extraction, will evaluate the effectiveness of SGE in remediating fuels and TCE contamination contained in the tight clay soil formations surrounding the abandoned underground fuel storage vault located at the SW Tanks Site. In situ sensors have recently received much acclaim as a technology that can be effective in remediating hazardous waste sites. Sensors can be useful for determining real-time, in situ contaminant concentrations during the remediation process for performance monitoring and in providing feedback for controlling the remediation process. Following the SGE demonstration, the SGE system and SW Tanks test site will be modified to demonstrate bioremediation as an effective means of degrading the remaining contaminants in situ. The bioremediation demonstration will evaluate a bioventing process in which the naturally occurring consortium of soil bacteria will be stimulated to aerobically degrade soil contaminants, including fuel and TCE, in situ

  12. Public participation in the evaluation of innovative environmental cleanup technology

    International Nuclear Information System (INIS)

    Peterson, T.; McCabe, G.; Serie, P.; Niesen, K.

    1994-08-01

    Technologies for remediation of contamination are urgently needed to clean up US Department of Energy (DOE) sites across the country. DOE is managing a national program to develop, demonstrate, and deploy new technologies with promise to expedite this cleanup. The Integrated Demonstration for Cleanup of Volatile Organic Compounds at Arid Sites (VOC-Arid ID) is one such effort. Time and resources, however, are too limited to be invested in methods of remediation that will never be deployed because they have not been rigorously evaluated or because they face the withering opposition of stakeholders. Therefore the VOC-Arid ID is assessing technology both in terms of its technical effectiveness and its stakeholder acceptability. Only if a technology performs as required and is acceptable to regulators, users of technology, and the public will the VOC-Arid ID recommend its use. What distinguishes public involvement in the VOC-Arid ID is the direct influence stakeholders have on the design of technology demonstrations by working directly with technology developers. Stakeholders participated in defining the criteria with which innovative environmental cleanup technology is being evaluated. The integrated demonstration is committed to providing stakeholders with the information they've indicated they need to reach reasoned judgments about the use of specific cleanup technologies. A guiding principle of the VOC-Arid ID is that stakeholder participation improves the technologies being developed, enhances the acceptance of the technologies, and will lead to the broad and timely deployment of appropriate and effective methods of environmental remediation. The VOC-Arid ID has involved stakeholders from the host demonstration site, Hanford, Washington, and from other and sites where the ID technologies may be deployed

  13. Evaluation of innovative arsenic treatment technologies :the arsenic water technology partnership vendors forums summary report.

    Energy Technology Data Exchange (ETDEWEB)

    Everett, Randy L.; Siegel, Malcolm Dean; McConnell, Paul E.; Kirby, Carolyn (Comforce Technical Services, Inc.)

    2006-09-01

    The lowering of the drinking water standard (MCL) for arsenic from 50 {micro}g/L to 10 {micro}g/L in January 2006 could lead to significant increases in the cost of water for many rural systems throughout the United States. The Arsenic Water Technology Partnership (AWTP), a collaborative effort of Sandia National Laboratories, the Awwa Research Foundation (AwwaRF) and WERC: A Consortium for Environmental Education and Technology Development, was formed to address this problem by developing and testing novel treatment technologies that could potentially reduce the costs of arsenic treatment. As a member of the AWTP, Sandia National Laboratories evaluated cutting-edge commercial products in three annual Arsenic Treatment Technology Vendors Forums held during the annual New Mexico Environmental Health Conferences (NMEHC) in 2003, 2004 and 2005. The Forums were comprised of two parts. At the first session, open to all conference attendees, commercial developers of innovative treatment technologies gave 15-minute talks that described project histories demonstrating the effectiveness of their products. During the second part, these same technologies were evaluated and ranked in closed sessions by independent technical experts for possible use in pilot-scale field demonstrations being conducted by Sandia National Laboratories. The results of the evaluations including numerical rankings of the products, links to company websites and copies of presentations made by the representatives of the companies are posted on the project website at http://www.sandia.gov/water/arsenic.htm. This report summarizes the contents of the website by providing brief descriptions of the technologies represented at the Forums and the results of the evaluations.

  14. Technological innovation in neurosurgery: a quantitative study.

    Science.gov (United States)

    Marcus, Hani J; Hughes-Hallett, Archie; Kwasnicki, Richard M; Darzi, Ara; Yang, Guang-Zhong; Nandi, Dipankar

    2015-07-01

    Technological innovation within health care may be defined as the introduction of a new technology that initiates a change in clinical practice. Neurosurgery is a particularly technology-intensive surgical discipline, and new technologies have preceded many of the major advances in operative neurosurgical techniques. The aim of the present study was to quantitatively evaluate technological innovation in neurosurgery using patents and peer-reviewed publications as metrics of technology development and clinical translation, respectively. The authors searched a patent database for articles published between 1960 and 2010 using the Boolean search term "neurosurgeon OR neurosurgical OR neurosurgery." The top 50 performing patent codes were then grouped into technology clusters. Patent and publication growth curves were then generated for these technology clusters. A top-performing technology cluster was then selected as an exemplar for a more detailed analysis of individual patents. In all, 11,672 patents and 208,203 publications related to neurosurgery were identified. The top-performing technology clusters during these 50 years were image-guidance devices, clinical neurophysiology devices, neuromodulation devices, operating microscopes, and endoscopes. In relation to image-guidance and neuromodulation devices, the authors found a highly correlated rapid rise in the numbers of patents and publications, which suggests that these are areas of technology expansion. An in-depth analysis of neuromodulation-device patents revealed that the majority of well-performing patents were related to deep brain stimulation. Patent and publication data may be used to quantitatively evaluate technological innovation in neurosurgery.

  15. Efficiency of innovative technology in construction industry

    Science.gov (United States)

    Stverkova, H.; Vaclavik, V.

    2017-10-01

    The need for sustainability increasingly influences the development of new technologies, business processes and working practices. Innovations are an important part of all business processes. The aim of innovation is, in particular, to reduce the burden on the environment. The current trend in the construction industry is diamond rope cutting. The aim of the paper is to evaluate the most advanced technology for cutting and removing concrete structures in terms of efficiency.

  16. HISTORY AND ACCOMPLISHMENTS OF THE US EPA'S SUPERFUND INNOVATIVE TECHNOLOGY EVALUATION (SITE) MONITORING AND MEASUREMENT (MMT) PROGRAM

    Science.gov (United States)

    This manuscript presents the history and evolution of the U.S. Environmental Protection Agency's (EPA) Superfund Innovative Technology Evaluation (SITE) Monitoring and Measurement Technology (MMT) Program. This includes a discussion of how the fundamental concepts of a performanc...

  17. Strategy of technology and innovation

    International Nuclear Information System (INIS)

    Kim, Yeon Min

    1998-10-01

    This book introduces strategy of technology and innovation which includes design and development of strategy of technology, performance of strategy of technology and building and practice of strategy of development. The contents of this book are form of industrial innovation, act in strategy, advantage of technical innovation, new perspective of studying and innovation, alliance with competitor, cost of transmission and innovation, learning cycle of new product and power of consistency of product.

  18. OPEN INNOVATION PROJECT: THE SYSTEM OF ONLINE INDICATORS IN SCIENCE, TECHNOLOGY AND INNOVATION OF AMAZONAS (SiON

    Directory of Open Access Journals (Sweden)

    Moises Andrade Coelho

    2016-05-01

    Full Text Available This study aims to evaluate the implementation of an open innovation project in a public institution in the state of Amazonas. The theoretical and empirical background deals with science, technology and innovation indicators and open innovation. The study is characterized as a qualitative and descriptive research, with the case study as a methodological procedure. The delimitation of the universe was composed by a public institution in the area of science, technology and innovation (ST&I. In the case study, it was used an approach as tool to assess the implementation of open innovation projects. The results are shown several stages of open innovation project analyzed.  The study demonstrates the implications of open innovation project adoption to the strengthening of external networks and the maturing of the internal environment. The relevance of the study is based on the evaluation of an open innovation project in a public institution in order to foster the transition from traditional innovation processes to open innovation processes.

  19. SUBSURFACE VOLATIZATION AND VENTILATION SYSTEM (SVVS) - INNOVATIVE TECHNOLOGY REPORT

    Science.gov (United States)

    This report summarizes the findings associated with a Demonstration Test of Environmental Improvement Technologies’ (EIT) Subsurface Volatilization and Ventilation System (SVVS) process. The technology was evaluated under the EPA Superfund Innovative Technology Evaluation (SITE) ...

  20. Innovative Technology Development Program. Final summary report

    International Nuclear Information System (INIS)

    Beller, J.

    1995-08-01

    Through the Office of Technology Development (OTD), the U.S. Department of Energy (DOE) has initiated a national applied research, development, demonstration, testing, and evaluation program, whose goal has been to resolve the major technical issues and rapidly advance technologies for environmental restoration and waste management. The Innovative Technology Development (ITD) Program was established as a part of the DOE, Research, Development, Demonstration, Testing, and Evaluation (RDDT ampersand E) Program. The plan is part of the DOE's program to restore sites impacted by weapons production and to upgrade future waste management operations. On July 10, 1990, DOE issued a Program Research and Development Announcement (PRDA) through the Idaho Operations Office to solicit private sector help in developing innovative technologies to support DOE's clean-up goals. This report presents summaries of each of the seven projects, which developed and tested the technologies proposed by the seven private contractors selected through the PRDA process

  1. National Strategies for Technological Innovation

    Science.gov (United States)

    Rossini, Frederick; Bozeman, Barry

    1977-01-01

    Considers the implications of the technological innovation literature for possible national strategies for innovation. Sketches highly generalized innovation strategies for nations at various levels of technological development. (Author/IRT)

  2. The Management of Innovation and Technology

    DEFF Research Database (Denmark)

    Howells, John

    in innovation - The reciprocal relationship between intellectual property law and technological innovation. - The role of technological skills and regimes of technological education in innovation. - An introduction to the role of the state in maintaining the innovative capacity of the private sector....... of the reality of taking decisions on innovation. The chapters cover: - The social context for individual acts of creative insight - The development of the technology-market relationship - The management of R&D and technological standards - Technological competition - The role of institutions of finance...

  3. Innovative nuclear thermal propulsion technology evaluation: Results of the NASA/DOE Task Team study

    International Nuclear Information System (INIS)

    Howe, S.; Borowski, S.; Helms, I.; Diaz, N.; Anghaie, S.; Latham, T.

    1991-01-01

    In response to findings from two NASA/DOE nuclear propulsion workshops held in the summer of 1990, six task teams were formed to continue evaluation of various nuclear propulsion concepts. The Task Team on Nuclear Thermal Propulsion (NTP) created the Innovative Concepts Subpanel to evaluate thermal propulsion concepts which did not utilize solid fuel. The Subpanel endeavored to evaluate each of the concepts on a ''level technological playing field,'' and to identify critical technologies, issues, and early proof-of-concept experiments. The concepts included the liquid core fission, the gas core fission, the fission foil reactors, explosively driven systems, fusion, and antimatter. The results of the studies by the panel will be provided. 13 refs., 6 figs., 2 tabs

  4. Drug delivery system innovation and Health Technology Assessment: Upgrading from Clinical to Technological Assessment.

    Science.gov (United States)

    Panzitta, Michele; Bruno, Giorgio; Giovagnoli, Stefano; Mendicino, Francesca R; Ricci, Maurizio

    2015-11-30

    Health Technology Assessment (HTA) is a multidisciplinary health political instrument that evaluates the consequences, mainly clinical and economical, of a health care technology; the HTA aim is to produce and spread information on scientific and technological innovation for health political decision making process. Drug delivery systems (DDS), such as nanocarriers, are technologically complex but they have pivotal relevance in therapeutic innovation. The HTA process, as commonly applied to conventional drug evaluation, should upgrade to a full pharmaceutical assessment, considering the DDS complexity. This is useful to study more in depth the clinical outcome and to broaden its critical assessment toward pharmaceutical issues affecting the patient and not measured by the current clinical evidence approach. We draw out the expertise necessary to perform the pharmaceutical assessment and we propose a format to evaluate the DDS technological topics such as formulation and mechanism of action, physicochemical characteristics, manufacturing process. We integrated the above-mentioned three points in the Evidence Based Medicine approach, which is data source for any HTA process. In this regard, the introduction of a Pharmaceutics Expert figure in the HTA could be fundamental to grant a more detailed evaluation of medicine product characteristics and performances and to help optimizing DDS features to overcome R&D drawbacks. Some aspects of product development, such as manufacturing processes, should be part of the HTA as innovative manufacturing processes allow new products to reach more effectively patient bedside. HTA so upgraded may encourage resource allocating payers to invest in innovative technologies and providers to focus on innovative material properties and manufacturing processes, thus contributing to bring more medicines in therapy in a sustainable manner. Copyright © 2015 Elsevier B.V. All rights reserved.

  5. Key Issues in Global Technological Innovation Projects

    Directory of Open Access Journals (Sweden)

    Roberto Sbragia

    2012-04-01

    Full Text Available This article aimed to identify those issues that were present in global technological innovation projects carried out by Brazilian multinational companies and which performance criterions these undertakings met. We investigated 36 global technological innovation projects from Brazilian multinational enterprises through a web-survey. Findings show that these companies went beyond the traditional iron triangle to evaluate their technological efforts and considered additional performance dimensions such as customer satisfaction, business results, and preparation for the future. Results also show high degree of presence for issues emerging from the industry, moderate degree of presence for issues emerging from both the project and R&D activities, and low degree of presence for issues emerging from the headquarters, the subsidiaries, and the external environment. Further research is needed to find out if and how these issues influenced the performance of the global technological innovation projects studied.DOI:10.5585/gep.v3i1.72

  6. ASSESSMENT OF QUALITY OF INNOVATIVE TECHNOLOGIES

    Directory of Open Access Journals (Sweden)

    Larisa Alexejevna Ismagilova

    2016-12-01

    Full Text Available We consider the topical issue of implementation of innovative technologies in the aircraft engine building industry. In this industry, products with high reliability requirements are developed and mass-produced. These products combine the latest achievements of science and technology. To make a decision on implementation of innovative technologies, a comprehensive assessment is carried out. It affects the efficiency of the innovations realization. In connection with this, the assessment of quality of innovative technologies is a key aspect in the selection of technological processes for their implementation. Problems concerning assessment of the quality of new technologies and processes of production are considered in the suggested method with respect to new positions. The developed method of assessing the quality of innovative technologies stands out for formed system of the qualimetric characteristics ensuring the effectiveness, efficiency, adaptability of innovative technologies and processes. The feature of suggested system of assessment is that it is based on principles of matching and grouping of quality indicators of innovative technologies and the characteristics of technological processes. The indicators are assessed from the standpoint of feasibility, technologies competiveness and commercial demand of products. In this paper, we discuss the example of implementing the approach of assessing the quality of the innovative technology of high-tech products such as turbine aircraft engine.

  7. Technological literacy and innovation education

    DEFF Research Database (Denmark)

    Hansbøl, Mikala

    Lately, in Denmark and internationally, there has been an increased focus on welfare technology and innovation. The Danish healthcare system is being fundamentally restructured and re-formed, the health professions are dealing with increased speed on the introductions of new political strategies...... on innovation education and educational activities fostering technological literacy. While focus on technological literacy has often (historically) taken a functionalist direction, and mainly been related to ICT and development of non- vocational curricula, more recent developments of approaches...... to technological literacy emphasizes profession oriented relational technological literacy. Furthermore, new definitions of 21st century competencies and skills emphasize creative learning and innovation skills and competencies as central ingredients in the 21st century labor market, and call for innovation...

  8. Reactor surface contamination stabilization. Innovative technology summary report

    International Nuclear Information System (INIS)

    1998-11-01

    Contaminated surfaces, such as the face of a nuclear reactor, need to be stabilized (fixed) to avoid airborne contamination during decontamination and decommissioning activities, and to prepare for interim safe storage. The traditional (baseline) method of fixing the contamination has been to spray a coating on the surfaces, but ensuring complete coverage over complex shapes, such as nozzles and hoses, is difficult. The Hanford Site C Reactor Technology Demonstration Group demonstrated innovative technologies to assess stabilization properties of various coatings and to achieve complete coverage of complex surfaces on the reactor face. This demonstration was conducted in two phases: the first phase consisted of a series of laboratory assessments of various stabilization coatings on metal coupons. For the second phase, coatings that passed the laboratory tests were applied to the front face of the C Reactor and evaluated. The baseline coating (Rust-Oleum No. 769) and one of the innovative technologies did not completely cover nozzle assemblies on the reactor face, the most critical of the second-phase evaluation criteria. However, one of the innovative coating systems, consisting of a base layer of foam covered by an outer layer of a polymeric film, was successful. The baseline technology would cost approximately 33% as much as the innovative technology cost of $64,000 to stabilize an entire reactor face (196 m 2 or 2116 ft 2 ) with 2,004 nozzle assemblies, but the baseline system failed to provide complete surface coverage

  9. Reputation for technological innovation: Does it actually cohere with innovative activity?

    Directory of Open Access Journals (Sweden)

    Patrick J. Höflinger

    2018-01-01

    Full Text Available Firms strategically promote, foster and pursue a reputation for technological innovation. Yet, present research did not examine whether such perception actually coheres with innovative activity itself. Previous studies in this field often relied solely on tangible products/product introductions, hence we apply multiple proxies based on a firm's intangible innovative performance to examine the influences on reputation for technological innovation. Using patent, financial and consumer data our Poisson regression analyzes 65 international firms which have been nominated by 231 consumers. We apply time-series and likewise cross-sectional data for our interdisciplinary analysis. Our findings demonstrate that innovative performance (citation intensity is linked to reputation for technological innovation. Counter-intuitively, our results provide evidence that marketing intensity negatively influences a reputation for technological innovation. From the results, we conclude that innovative performance may be associated with a reputation for technological innovation. Actual technological advancement attracts attention from consumers that cannot be purchased with greater marketing investments. This implies that consumers appreciate the costly and uncertain R&D efforts and value those firms that constantly offer innovation. As a theoretical implication, the consideration of intangible inputs for reputation research is an important contribution for a holistic understanding. The results represent essential strategic information for innovation and marketing functions, where both divisions need to align their activities and investments.

  10. Technological Innovation for China’s Logistics Industry

    Directory of Open Access Journals (Sweden)

    Chieh-Yu Lin

    2008-01-01

    Full Text Available China’s logistics industry has started to pay attention to adopt more efficient logistics technologies to provide better services for their customers. This paper employes the questionnaire survey to study the factors influencing the adoption of technological innovations by logistics service providers in China as well as the influences of technological innovation on supply chain performance. Technological innovations are categorized into data acquisition technologies, information technologies, warehousing technologies, and transportation technologies. The results show that the adoption of technological innovations is significantly influenced by technological, organizational and environmental factors, and adopting innovative technologies will increase supply chain performance for the logistics industry in China.

  11. Recombinant innovation and endogenous technological transitions

    NARCIS (Netherlands)

    Frenken, K.; Izquierdo, L.R.; Zeppini, P.

    2012-01-01

    We propose a model of technological transitions based on two different types of innovations. Branching innovations refer to technological improvements along a particular path, while recombinant innovations represent fusions of multiple paths. Recombinant innovations create "short-cuts" which reduce

  12. Educational innovation, learning technologies and Virtual culture potential'

    Directory of Open Access Journals (Sweden)

    David Riley

    2002-12-01

    Full Text Available Learning technologies are regularly associated with innovative teaching but will they contribute to profound innovations in education itself? This paper addresses the question by building upon Merlin.Donald's co-evolutionary theory of mind, cognition and culture. He claimed that the invention of technologies for storing and sharing external symbol systems, such as writing, gave rise to a 'theoretic culture' with rich symbolic representations and a resultant need for formal education. More recently, Shaffer and Kaput have claimed that the development of external and shared symbol-processing technologies is giving rise to an emerging 'virtual culture'. They argue that mathematics curricula are grounded in theoretic culture and should change to meet the novel demands of 'virtual culture' for symbol-processing and representational fluency. The generic character of their cultural claim is noted in this paper and it is suggested that equivalent pedagogic arguments are applicable across the educational spectrum. Hence, four general characteristics of virtual culture are proposed, against which applications of learning technologies can be evaluated for their innovative potential. Two illustrative uses of learning technologies are evaluated in terms of their 'virtual culture potential' and some anticipated questions about this approach are discussed towards the end of the paper.

  13. Game-like Technology Innovation Education

    DEFF Research Database (Denmark)

    Magnussen, Rikke

    2011-01-01

      The aim of this paper is to discuss the first results and methodological challenges and perspectives of designing game-inspired scenarios for implementation of innovation processes into schools' science education. This paper comprises and report on a case study of a game-inspired innovation...... scenario designed for technology education in grades 7 - 9 in Danish schools. In the paper, methodological challenges of doing design-based research into technology innovation education are discussed. The preliminary results from the first studies of a game-inspired technology innovation camp are also...... presented, along with discussions of the future of development of these educational spaces....

  14. Technology certification and technology acceptance: Promoting interstate cooperation and market development for innovative technologies

    International Nuclear Information System (INIS)

    Brockbank, B.R.

    1995-03-01

    In the past two years, public and private efforts to promote development and deployment of innovative environmental technologies have shifted from the analysis of barriers to the implementation of a variety of initiatives aimed at surmounting those barriers. Particular attention has been directed at (1) streamlining fragmented technology acceptance processes within and among the states, and (2) alleviating disincentives, created by inadequate or unverified technology cost and performance data, for users and regulators to choose innovative technologies. Market fragmentation currently imposes significant cost burdens on technology developers and inhibits the investment of private capital in environmental technology companies. Among the responses to these problems are state and federal technology certification/validation programs, efforts to standardize cost/performance data reporting, and initiatives aimed at promoting interstate cooperation in technology testing and evaluation. This paper reviews the current status of these initiatives, identifies critical challenges to their success, and recommends strategies for addressing those challenges

  15. Game-like Technology Innovation Education

    DEFF Research Database (Denmark)

    Magnussen, Rikke

    2011-01-01

    scenario designed for technology education in grades 7 - 9 in Danish schools. In the paper, methodological challenges of doing design-based research into technology innovation education are discussed. The preliminary results from the first studies of a game-inspired technology innovation camp are also...

  16. Technology Development and Innovation | Wind | NREL

    Science.gov (United States)

    Technology Development and Innovation Technology Development and Innovation Technology Development Technology Center (NWTC) supports efforts to reduce bird and bat fatalities at wind energy projects and photo of wind turbines at the National Wind Technology Center. Wildlife technology research and

  17. Demonstrating and implementing innovative technologies: Case studies from the USDOE Office of Technology Development

    International Nuclear Information System (INIS)

    Brouns, T.M.; Koegler, K.J.; Mamiya, L.S.

    1995-02-01

    This paper describes elements of success for demonstration, evaluation, and transfer for deployment of innovative technologies for environmental restoration. They have been compiled from lessons learned through the US Department of Energy (DOE) Office of Technology Development's Volatile Organic Compounds in Arid Soil Integrated Demonstration (VOC-Arid ID). The success of the VOC-Arid ID program was determined by the rapid development demonstration, and transfer for deployment of technologies to operational sites that improve on safety, cost, and/or schedule of performance over baseline technologies. The VOC-Arid ID successfully fielded more than 25 innovative technology field demonstrations; several of the technologies demonstrated have been successfully transferred for deployment Field demonstration is a critical element in the successful transfer of innovative technologies into environmental restoration operations. The measures of success for technology demonstrations include conducting the demonstration in a safe and controlled environment and generating the appropriate information by which to evaluate the technology. However, field demonstrations alone do not guarantee successful transfer for deployment There are many key elements throughout the development and demonstration process that have a significant impact on the success of a technology. This paper presents key elements for a successful technology demonstration and transfer for deployment identified through the experiences of the VOC-Arid ID. Also, several case studies are provided as examples

  18. Art technologies as possible propulsars in technological innovation

    DEFF Research Database (Denmark)

    Jørgensen, Lars Botin

    2003-01-01

    kind. This discussion, of general character, constitutes the initial part of this paper. Then it briefly looks into the final terms of the papertitle and try to relate to the diffuse and discussed technological innovation. Both aspects – art and technology and technological innovation – will be dealt...... with from a historical/hermeneutic and social constructivist point of view, as the paper moves from a general principal level to a more specific, exemplary level, where three different art technologies are presented as possible propulsars in technological innovation.......Art and technology has, as the German philosopher Martin Heidegger points out, the same etymological root. A thorough investigation of the relationship between art and technology will show how this same root has manifested itself in different times and spaces bringing results of the most variegated...

  19. Technology Matters - When new technology reshape innovation

    DEFF Research Database (Denmark)

    Edwards, Kasper; Pedersen, Jørgen Lindgaard

    2004-01-01

    Management of innovation is an important issue for firms and being good at this may be the deciding difference between death and survival. This paper ar-gues, based on 12 case studies, that new technology influence the innovative ca-pability of firms and disturbingly the process appears...... not to be managed in the sense that aims, instruments and resources are unclear. It is observed that new technology is adopted with a limited scope and fo-cus – often to solve a particular technical problem e.g. the quality of specifica-tion are too low. For a single reason a new technology is introduced within...... the firm, which over time becomes a source of innovation. However, through adoption of this new technology firms engage in a mu-tual learning and forming process where the firm learn by using the new technol-ogy. When learning, the firm and the new technology is mutually formed as the firm tries to adopt...

  20. Stimulating technological innovation : problem identification and intervention formulation with the technological innovation systems framework

    NARCIS (Netherlands)

    Kieft, A.C.

    2017-01-01

    The technological innovation systems (TIS) framework provides a theory to understand under what conditions technological innovations are successfully developed and implemented. The objective of this dissertation is to further strengthen this TIS intervention framework, which is the part of the TIS

  1. Innovative technology summary report: Innovative grouting and retrieval

    International Nuclear Information System (INIS)

    1998-10-01

    Innovative grouting and retrieval (IGR) technology provides an innovative and cost-effective approach for full-pit and hot-spot retrieval of buried transuranic (TRU) waste sites and in situ disposal of buried waste with improved confinement. Innovative grouting technology: minimizes spreading of contamination by agglomerating the soil particles containing plutonium/americium particulates into nonaerosolizable particles; minimizes worker risks and exposure; is more effective in controlling the spread of contamination than common mining practices such as directed air flow, misting, and fixant sprays; eliminates further treatment because the grouted, rubberized waste is ready for shipment to the Waste Isolation Pilot Project (WIPP); reduces capital expenditures, operating costs, and containment structure requirements; and is an estimated five times faster than the baseline technology of removal, packaging, and storage

  2. Innovate or imitate? Behavioural technological change

    NARCIS (Netherlands)

    Hommes, C.; Zeppini, P.

    2013-01-01

    We propose a behavioural model of technological change with evolutionary switching between boundedly rational costly innovators and free imitators, and study the endogenous interplay of innovation decisions, market price dynamics and technological progress. Innovation and imitation are strategic

  3. Innovate or imitate? Behavioural technological change

    NARCIS (Netherlands)

    Hommes, C.; Zeppini, P.

    2014-01-01

    We propose a behavioural model of technological change with evolutionary switching between costly innovators and free imitators, and study the endogenous interplay of innovation decisions, market price dynamics and technological progress. Innovation and imitation are strategic substitutes and

  4. A survey of environmental needs and innovative technologies in Germany

    International Nuclear Information System (INIS)

    Voss, C.F.; Roberds, W.J.

    1995-05-01

    The International Technology Program (IT?), formerly the international Technology Exchange Program (ITEP), of the Department of Energy's (DOE's) Office of Environmental Restoration and Waste Management (EM) is responsible for promoting: (1) the import of innovative technologies to better address EM's needs; and (2) the export of US services into foreign markets to enhance US competitiveness. Under this program: (1) the environmental restoration market in Germany was evaluated, including the description of the general types of environmental problems, the environmental regulations, and specific selected contaminated sites; and (2) potentially innovative environmental restoration technologies, either commercially available or under development in Germany, were identified, described and evaluated. It was found that: (1) the environmental restoration market in Germany is very large, on the order of several billion US dollars per year, with a significant portion possibly available to US businesses; and (2) a large number (54) of innovative environmental restoration technologies, which are either commercially available or under development in Germany, may have some benefit to the DOE EM program and should be considered for transfer to the US

  5. Identifying technology innovations for marginalized smallholders-A conceptual approach.

    Science.gov (United States)

    Malek, Mohammad Abdul; Gatzweiler, Franz W; Von Braun, Joachim

    2017-05-01

    This paper adds a contribution in the existing literature in terms of theoretical and conceptual background for the identification of idle potentials of marginal rural areas and people by means of technological and institutional innovations. The approach follows ex-ante assessment for identifying suitable technology and institutional innovations for marginalized smallholders in marginal areas-divided into three main parts (mapping, surveying and evaluating) and several steps. Finally, it contributes to the inclusion of marginalized smallholders by an improved way of understanding the interactions between technology needs, farming systems, ecological resources and poverty characteristics in the different segments of the poor, and to link these insights with productivity enhancing technologies.

  6. Review of early assessment models of innovative medical technologies

    DEFF Research Database (Denmark)

    Fasterholdt, Iben; Krahn, Murray D; Kidholm, Kristian

    2017-01-01

    INTRODUCTION: Hospitals increasingly make decisions regarding the early development of and investment in technologies, but a formal evaluation model for assisting hospitals early on in assessing the potential of innovative medical technologies is lacking. This article provides an overview of models...

  7. Management of the Technological Innovation Process in Software Companies from Sinaloa, Mexico

    Directory of Open Access Journals (Sweden)

    Alejandra MIRANDA FELIX

    2016-06-01

    Full Text Available The objective of this paper is to explain the management process of technological innovation within certified software companies from Sinaloa, considering their strategic technology plan, innovative processes, and intellectual capital. This work is based on the study of 9 software companies located in Sinaloa and certified through the CMMI (Capability Maturity Model for Integration process. Their problems are grouped into three areas: 1 strategic technology plan, 2 innovation and 3 intellectual capital. We propose a model of innovation management to explain and evaluate the integration of those three areas applying a mixed methodology, theoretical foundations, and the analysis of the results. The overall results reveal that the certified software companies from Sinaloa manage innovation informally, through an internal, costly and independent innovation process without considering alliances with other companies, educational institutions, government agencies, technology parks or research and development centers.

  8. Enacting Risk in Independent Technological Innovation

    DEFF Research Database (Denmark)

    Berglund, Henrik; Hellström, Tomas

    2002-01-01

    The present study aims at investigating the role of risk in the activity of independent technological venturing. Altogether, 12 deep-interviews were conducted with technological entrepreneurs, who had taken part in the inventive, developmental and the commercialisation phases of a technology......-based innovation process. The interviews revealed a number of enactment approaches through which these innovators encountered and affected (dealt with or transformed) risk within the innovation process. Factors thus developed from the empirical material included human capital, pace and priority, the world moves...... for the benefit of innovation management....

  9. ASSESSMENT OF QUALITY OF INNOVATIVE TECHNOLOGIES

    OpenAIRE

    Larisa Alexejevna Ismagilova; Nadegda Aleksandrovna Sukhova

    2016-01-01

    We consider the topical issue of implementation of innovative technologies in the aircraft engine building industry. In this industry, products with high reliability requirements are developed and mass-produced. These products combine the latest achievements of science and technology. To make a decision on implementation of innovative technologies, a comprehensive assessment is carried out. It affects the efficiency of the innovations realization. In connection with this, the assessment of qu...

  10. Innovation Value of Information Technology: Impact of Information Technology--Intensity on Innovation Capability and Firm Performance

    Science.gov (United States)

    Ramamani, Mahesh Kumar

    2010-01-01

    Though information technology adoptions have been always referred to as innovations in firms, much of the business value literature has concentrated on the tangible and immediately measurable impacts of information technology (IT) adoptions. This study aims to explore the impact of information technology investments on the innovativeness of a…

  11. Research report of innovation of industrial technology in FY 1996; 1996 nendo sangyo gijutsu no innovation chosa hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Remarkable innovations of the Japanese industry in various fields have been extracted and evaluated during the 50 post-war years. In this report, a method of capturing the innovations of industrial technology is examined. It is essential to clarify the social role of industrial technology, and the original views of this research are indicated by focusing on the innovation process in order to clarify the connections between those of mutual industry, technical management, man-power, and unique Japanese technology. The innovations achieved by the Japanese industry during post-war 50 years are classified into eight categories, i.e., automobiles, iron, aero-space/railways, machines, national land/energy, chemicals/fine ceramics, electronics/information/communication, and life, to clarify the technological progress in each field. In Japan, the industrial technology has been developed with learning from fundamental researches in Europe and the USA. In the future, it is necessary to independently develop industrial frontier. 4 figs., 47 tabs.

  12. Using Innovative Technologies for Manufacturing and Evaluating Rocket Engine Hardware

    Science.gov (United States)

    Betts, Erin M.; Hardin, Andy

    2011-01-01

    Many of the manufacturing and evaluation techniques that are currently used for rocket engine component production are traditional methods that have been proven through years of experience and historical precedence. As we enter into a new space age where new launch vehicles are being designed and propulsion systems are being improved upon, it is sometimes necessary to adopt new and innovative techniques for manufacturing and evaluating hardware. With a heavy emphasis on cost reduction and improvements in manufacturing time, manufacturing techniques such as Direct Metal Laser Sintering (DMLS) and white light scanning are being adopted and evaluated for their use on J-2X, with hopes of employing both technologies on a wide variety of future projects. DMLS has the potential to significantly reduce the processing time and cost of engine hardware, while achieving desirable material properties by using a layered powdered metal manufacturing process in order to produce complex part geometries. The white light technique is a non-invasive method that can be used to inspect for geometric feature alignment. Both the DMLS manufacturing method and the white light scanning technique have proven to be viable options for manufacturing and evaluating rocket engine hardware, and further development and use of these techniques is recommended.

  13. Innovation in surgical technology and techniques: Challenges and ethical issues.

    Science.gov (United States)

    Geiger, James D; Hirschl, Ronald B

    2015-06-01

    The pace of medical innovation continues to increase. The deployment of new technologies in surgery creates many ethical challenges including how to determine safety of the technology, what is the timing and process for deployment of a new technology, how are patients informed before undergoing a new technology or technique, how are the outcomes of a new technology evaluated and how are the responsibilities of individual patients and society at large balanced. Ethical considerations relevant to the implementation of ECMO and robotic surgery are explored to further discussion of how we can optimize the delicate balance between innovation and regulation. Copyright © 2015 Elsevier Inc. All rights reserved.

  14. Innovative technology transfer of nondestructive evaluation research

    Science.gov (United States)

    Brian Brashaw; Robert J. Ross; Xiping Wang

    2008-01-01

    Technology transfer is often an afterthought for many nondestructive evaluation (NDE) researchers. Effective technology transfer should be considered during the planning and execution of research projects. This paper outlines strategies for using technology transfer in NDE research and presents a wide variety of technology transfer methods used by a cooperative...

  15. The NIHR Invention for Innovation (i4i) Programme: A Review of Progress and Contributions to Innovation in Healthcare Technologies.

    Science.gov (United States)

    Marjanovic, Sonja; Krapels, Joachim; Sousa, Sonia; Castle-Clarke, Sophie; Horvath, Veronika; Chataway, Joanna

    2015-11-30

    The National Institute for Health Research (NIHR) Invention for Innovation (i4i) programme supports the development of innovative medical technologies for patient benefit. The i4i product development stream involves collaborative projects between at least two partners from academia, the NHS and industry. Medical technology innovators apply for funding for one to three years, through a peer review-based process that includes presentation to a selection panel. The funding and business advice provided by i4i support the development of early-stage innovations, generally at proof of concept and prototype stages. Since its inception the product development stream has identified and supported 170 projects, led by 146 principal investigators (PIs). RAND Europe evaluated the programme, with the aim of identifying its outputs and impacts and examining the factors influencing performance. The evaluation findings should help inform the future of the programme. The evaluation used a multi-method approach, including a focused review of background information from i4i, scoping interviews with key informants, a survey of programme participants and case studies of projects representing diverse technologies and health needs.

  16. Essays on Energy Technology Innovation Policy

    Science.gov (United States)

    Chan, Gabriel Angelo Sherak

    Motivated by global climate change, enhancing innovation systems for energy technologies is seen as one of the largest public policy challenges of the near future. The role of policy in enhancing energy innovation systems takes several forms: public provision of research and develop funding, facilitating the private sector's capability to develop new technologies, and creating incentives for private actors to adopt innovative and appropriate technologies. This dissertation explores research questions that span this range of policies to develop insights in how energy technology innovation policy can be reformed in the face of climate change. The first chapter of this dissertation explores how decision making to allocate public research and development funding could be improved through the integration of expert technology forecasts. I present a framework to evaluate and optimize the U.S. Department of Energy's research and development portfolio of applied energy projects, accounting for spillovers from technical complimentary and competition for the same market share. This project integrates one of the largest and most comprehensive sets of expert elicitations on energy technologies (Anadon et al., 2014b) in a benefit evaluation framework. This work entailed developing a new method for probability distribution sampling that accommodates the information that can be provided by expert elicitations. The results of this project show that public research and development in energy storage and solar photovoltaic technologies has the greatest marginal returns to economic surplus, but the methodology developed in this chapter is broadly applicable to other public and private R&D-sponsoring organizations. The second chapter of this dissertation explores how policies to transfer technologies from federally funded research laboratories to commercialization partners, largely private firms, create knowledge spillovers that lead to further innovation. In this chapter, I study the U

  17. Achievements of Theoretical Research on Chinese Technological Innovation

    Directory of Open Access Journals (Sweden)

    Wang Hanxi

    2017-01-01

    Full Text Available Using the CNKI database as the sample source, we investigated the makeup of current research results on Chinese technological innovation, and found that the study of Chinese technological innovation consists of nine directions - underlying principles of innovation behavior, concepts of innovation cognition, methods of innovation, behavior of innovation subjects, structure of innovation mediators, innovation capacity, public service system of innovation, policy support system of innovation, and cultural environment of innovation, as well as several issues of innovation, including its behavior mechanism, operational mechanism, work mechanism, modes of implementation, modes of mathematical representation, modes of physical representation, modes of behavioral representation, modes of performance representation, modes of function realization, modes of structure realization, modes of workflow realization, modes of carrier realization, etc. Such a scattered makeup requires us to formulate the system of Chinese technological innovation achievements from the perspective of philosophy of science. This will be an important mission in the study of Chinese technological innovation.

  18. Technology Audit: Assessment of Innovative Portfolio

    Directory of Open Access Journals (Sweden)

    Kurushina Viktoria

    2016-01-01

    Full Text Available The article discusses the features of the technological audit performing in the companies of oil and gas sector of Russian economy. To measure the innovations quality level the scale was developed based on the Theory of Inventive Problem Solving and the theory of technological structures. Figures of the innovations quantity by levels, volume and quality of the innovative portfolio are offered for assessment the innovative portfolio quality. The method was tested on an example of oil and gas transporting enterprises. The results of the comparative analysis of innovative portfolio are shown.

  19. Technological Innovations in Forensic Genetics

    DEFF Research Database (Denmark)

    Wienroth, Matthias; Morling, Niels; Williams, Robin

    2014-01-01

    This paper discusses the nature of four waves of technological innovations in forensic genetics alongside the social, legal and ethical aspect of these innovations. It emphasises the way in which technological advances and their socio-legal frameworks are co-produced, shaping technology...... expectations, social identities, and legal institutions. It also considers how imagined and actual uses of forensic genetic technologies are entangled with assertions about social order, affirmations of common values and civil rights, and promises about security and justice. Our comments seek to encourage...

  20. Technological Innovation, R & D Activities and Innovation System Between Organizations

    Directory of Open Access Journals (Sweden)

    Jonas Pedro Fabris

    2015-08-01

    Full Text Available This theoretical paper aimed to explicit, through the rescue of theoretical assumptions, the innovation, the innovation system, and the research and development (R & D activities. The innovation, especially technological innovation, is now seen as essential in differentiation strategies, competitiveness and growth in a greater number of businesses. Innovation is not only the result of financial investments by companies. For it to exist, it is necessary the existence of innovative capacity that should be present at all stages of the innovation process, and a favorable institutional environment and, increasingly, of specific incentive policies. That is, there are internal and external factors to companies and other institutions involved in the process. Innovation systems were discovered to resolve the variations in the degree of competitiveness of different economies and, above all, in relation to the technological performance and the ability to innovate these economies face the growing importance of international markets for high-tech products. Thus, it was found that successful innovators are not successful just because of their personal qualities and actions but as a result of their interaction with research and innovation systems that inhabit the quality of such systems.

  1. Stimulating technological innovation : problem identification and intervention formulation with the technological innovation systems framework

    OpenAIRE

    Kieft, A.C.

    2017-01-01

    The technological innovation systems (TIS) framework provides a theory to understand under what conditions technological innovations are successfully developed and implemented. The objective of this dissertation is to further strengthen this TIS intervention framework, which is the part of the TIS theoretical framework that facilitates the identification of inhibiting problems and the formulation of interventions. Theoretical adaptations and extensions are proposed and their merits subsequent...

  2. Governance and commercialization of technological innovation

    International Nuclear Information System (INIS)

    Fidanza, Andrea

    2015-01-01

    Technological innovation is not only a direct result of the economic resources allocated to research and development activities. It is also the result of the creation and organization of a complex innovation system that aims to involve different actors and stake holders along a process based on different stages ranging from scientific discovery to technological maturity. Risk and funds sharing between public and private sectors is a key element for the transition of a technology towards its commercialization, without which the innovation process is likely to remain trapped in the so-called “Valley of death” of a technology. Overcoming this barrier request a process based on three pillars: research, demonstration and production of a specific technology [it

  3. The Impact of Technological and Non-Technological Innovations on Firm Growth

    OpenAIRE

    Ali-Yrkkö, Jyrki; Martikainen, Olli

    2008-01-01

    This study investigates the relationship between innovations and firm growth, based on the data of Finnish firms operating in the software industry. We find that in terms of turnover and employment, firms with only technological innovations do not grow more rapidly than other firms. However, firm growth is positively associated with the combination of technological and non-technological innovations.

  4. Practice-centred evaluation and the privileging of care in health information technology evaluation.

    Science.gov (United States)

    Darking, Mary; Anson, Rachel; Bravo, Ferdinand; Davis, Julie; Flowers, Steve; Gillingham, Emma; Goldberg, Lawrence; Helliwell, Paul; Henwood, Flis; Hudson, Claire; Latimer, Simon; Lowes, Paul; Stirling, Ian

    2014-06-05

    Our contribution, drawn from our experience of the case study provided, is a protocol for practice-centred, participative evaluation of technology in the clinical setting that privileges care. In this context 'practice-centred' evaluation acts as a scalable, coordinating framework for evaluation that recognises health information technology supported care as an achievement that is contingent and ongoing. We argue that if complex programmes of technology-enabled service innovation are understood in terms of their contribution to patient care and supported by participative, capability-building evaluation methodologies, conditions are created for practitioners and patients to realise the potential of technologies and make substantive contributions to the evidence base underpinning health innovation programmes. Electronic Patient Records (EPRs) and telemedicine are positioned by policymakers as health information technologies that are integral to achieving improved clinical outcomes and efficiency savings. However, evaluating the extent to which these aims are met poses distinct evaluation challenges, particularly where clinical and cost outcomes form the sole focus of evaluation design. We propose that a practice-centred approach to evaluation - in which those whose day-to-day care practice is altered (or not) by the introduction of new technologies are placed at the centre of evaluation efforts - can complement and in some instances offer advantages over, outcome-centric evaluation models. We carried out a regional programme of innovation in renal services where a participative approach was taken to the introduction of new technologies, including: a regional EPR system and a system to support video clinics. An 'action learning' approach was taken to procurement, pre-implementation planning, implementation, ongoing development and evaluation. Participants included clinicians, technology specialists, patients and external academic researchers. Whilst undergoing these

  5. National Innovation System and Disruptive Innovations in Synthetic Rubber and Tire Technology

    Directory of Open Access Journals (Sweden)

    Ray R. Gehani

    2008-01-01

    Full Text Available The current models of National Innovation Systems (NIS are based on interactions and learning across three institutions: government, university and industry. This empirical study of the evolution of innovations in rubber and tire technologies such as the collaborative innovative suppliers (of raw materials and human capital and disruptive rival innovators to the traditional tri-helical model of National Innovation System. This was empirically examined for the evolution of rubber and tire technology and the rise and decline of its innovative region: the Rubber Capital of the World in Akron, Ohio.

  6. Combining the technological innovation systems framework with the entrepreneurs’ perspective on innovation

    NARCIS (Netherlands)

    Planko, Julia; Cramer, Jacqueline; Hekkert, Marko P.; Chappin, Maryse M H

    2017-01-01

    For their technological sustainability innovations to become successful, entrepreneurs can strategically shape the technological field in which they are involved. The technological innovation systems (TISs) literature has generated valuable insights into the processes which need to be stimulated for

  7. Regulatory barriers to hazardous waste technology innovation

    International Nuclear Information System (INIS)

    Kuusinen, T.L.; Siegel, M.R.

    1991-02-01

    The primary federal regulatory programs that influence the development of new technology for hazardous waste are the Resource Conservation and Recovery Act (RCRA) and the Comprehensive Environmental Response, Compensation and Liability Act (CERCLA, also commonly known as Superfund). Two important aspects of RCRA that can create barriers to hazardous waste technology innovation are technology-based waste pre-treatment standards and a cumbersome permitting program. By choosing a technology-based approach to the RCRA land disposal restrictions program, the US Environmental Protection Agency (EPA) has simultaneously created tremendous demand for the technologies specified in its regulations, while at the same time significantly reduced incentives for technology innovation that might have otherwise existed. Also, the RCRA hazardous waste permitting process can take years and cost hundreds of thousands of dollars. The natural tendency of permit writers to be cautious of unproven (i.e., innovative) technology also can create a barrier to deployment of new technologies. EPA has created several permitting innovations, however, to attempt to mitigate this latter barrier. Understanding the constraints of these permitting innovations can be important to the success of hazardous waste technology development programs. 3 refs

  8. Technological Innovation in Primary Education

    Directory of Open Access Journals (Sweden)

    Luisana Sleny López Alvarado

    2018-05-01

    Full Text Available The purpose of this essay is to reflect on technological innovation in Primary Education. In this idea, information processing was used to support the analysis of the theoretical approaches related to the relevance of education that is based on a significant pedagogical practice capable of developing the capacities and interests, so that they can appropriate the global and local content in the vision of access to information, considering social opportunities. The restructuring to which education has been subjected has been influenced by advances in science, technology and the demands of a complex, dynamic and uncertain society in the processes of educational innovation, which involves the introduction of something new in education. the educational system, modifying its teaching-learning structures through the incorporation of Information and Communication Technologies (ICT in the curricular design of primary education in its intention to train for incursion into science and technology from use of a wide range of didactic resources that lead to pedagogical innovation. It was concluded that technological innovation in the educational praxis of primary education, requires in addition to the vocation of service, to study the new didactic paradigms to display their reflective capacity and assume the commitment to acquire digital literacy to assume the requirements of a knowledge society which is increasingly globalized.

  9. Research on process management of nuclear power technological innovation

    International Nuclear Information System (INIS)

    Yang Hua; Zhou Yu

    2005-01-01

    Different from the other technological innovation processes, the technological innovation process of nuclear power engineering project is influenced deeply by the extensive environmental factors, the technological innovation of nuclear power engineering project needs to make an effort to reduce environmental uncertainty. This paper had described the mechanism of connection technological innovation process of nuclear power engineering project with environmental factors, and issued a feasible method based on model of bargaining to incorporate technological innovation process management of nuclear power engineering project with environmental factors. This method has realistic meanings to guide the technological innovation of nuclear power engineering project. (authors)

  10. Innovative technology demonstrations

    International Nuclear Information System (INIS)

    Anderson, D.B.; Hartley, J.N.; Luttrell, S.P.

    1992-04-01

    Currently, several innovative technologies are being demonstrated at Tinker Air Force Base (TAFB) to address specific problems associated with remediating two contaminated test sites at the base. Cone penetrometer testing (CPT) is a form of testing that can rapidly characterize a site. This technology was selected to evaluate its applicability in the tight clay soils and consolidated sandstone sediments found at TAFB. Directionally drilled horizontal wells have been successfully installed at the US Department of Energy's (DOE) Savannah River Site to test new methods of in situ remediation of soils and ground water. This emerging technology was selected as a method that may be effective in accessing contamination beneath Building 3001 without disrupting the mission of the building, and in enhancing the extraction of contamination both in ground water and in soil. A soil gas extraction (SGE) demonstration, also known as soil vapor extraction, will evaluate the effectiveness of SGE in remediating fuels and TCE contamination contained in the tight clay soil formations surrounding the abandoned underground fuel storage vault located at the SW Tanks Site. In situ sensors have recently received much acclaim as a technology that can be effective in remediating hazardous waste sites. Sensors can be useful for determining real-time, in situ contaminant concentrations during the remediation process for performance monitoring and in providing feedback for controlling the remediation process. A demonstration of two in situ sensor systems capable of providing real-time data on contamination levels will be conducted and evaluated concurrently with the SGE demonstration activities. Following the SGE demonstration, the SGE system and SW Tanks test site will be modified to demonstrate bioremediation as an effective means of degrading the remaining contaminants in situ

  11. Studying Innovation Technologies in Modern Education

    Science.gov (United States)

    Stukalenko, Nina M.; Zhakhina, Bariya B.; Kukubaeva, Asiya K.; Smagulova, Nurgul K.; Kazhibaeva, Gulden K.

    2016-01-01

    In modern society, innovation technologies expand to almost every field of human activity, including such wide field as education. Due to integrating innovation technologies into the educational process practice, this phenomenon gained special significance within improvement and modernization of the established educational system. Currently, the…

  12. From translational research to open technology innovation systems.

    Science.gov (United States)

    Savory, Clive; Fortune, Joyce

    2015-01-01

    The purpose of this paper is to question whether the emphasis placed within translational research on a linear model of innovation provides the most effective model for managing health technology innovation. Several alternative perspectives are presented that have potential to enhance the existing model of translational research. A case study is presented of innovation of a clinical decision support system. The paper concludes from the case study that an extending the triple helix model of technology transfer, to one based on a quadruple helix, present a basis for improving the performance translational research. A case study approach is used to help understand development of an innovative technology within a teaching hospital. The case is then used to develop and refine a model of the health technology innovation system. The paper concludes from the case study that existing models of translational research could be refined further through the development of a quadruple helix model of heath technology innovation that encompasses greater emphasis on user-led and open innovation perspectives. The paper presents several implications for future research based on the need to enhance the model of health technology innovation used to guide policy and practice. The quadruple helix model of innovation that is proposed can potentially guide alterations to the existing model of translational research in the healthcare sector. Several suggestions are made for how innovation activity can be better supported at both a policy and operational level. This paper presents a synthesis of the innovation literature applied to a theoretically important case of open innovation in the UK National Health Service. It draws in perspectives from other industrial sectors and applies them specifically to the management and organisation of innovation activities around health technology and the services in which they are embedded.

  13. Rethinking the Market - Technology Relationship for Innovation

    DEFF Research Database (Denmark)

    Howells, John

    This paper revisits the 'what causes innovation - market pull or technology push?' debate to argue that the conceptualisation is flawed and that the firm is the only 'agent' capable of innovative action. The paper differentiates between 'use', 'need' and 'intended use' to obtain greater precision...... with respect to the technology-market matching process that is fundamental to innovation. The validity of the approach is demonstrated through empirical examples. These examples also show the value of distinguishing between two types of market concept used by the innovating firm. These are the 'reference...... market' which is a traded product that is a principal source of 'use' ideas for the mental construction of the 'innovation market' concept. It is the latter that can be thought to guide the construction of innovative production technology....

  14. Unmet needs: relevance to medical technology innovation?

    Science.gov (United States)

    McCarthy, Avril D; Sproson, Lise; Wells, Oliver; Tindale, Wendy

    2014-01-01

    This paper describes and discusses the role of unmet needs in the innovation of new medical technologies using the National Institute for Health Research Devices for Dignity (D4D) Healthcare Technology Co-operative as a case study. It defines an unmet need, providing a spectrum of classification and discusses the benefits and the challenges of identifying unmet need and its influence on the innovation process. The process by which D4D has captured and utilized unmet needs to drive technology innovation is discussed and examples given. It concludes by arguing that, despite the challenges, defining and reviewing unmet need is a fundamental factor in the success of medical technology innovation.

  15. Making technological innovation work for sustainable development

    Science.gov (United States)

    Anadon, Laura Diaz; Harley, Alicia G.; Matus, Kira; Moon, Suerie; Murthy, Sharmila L.

    2016-01-01

    This paper presents insights and action proposals to better harness technological innovation for sustainable development. We begin with three key insights from scholarship and practice. First, technological innovation processes do not follow a set sequence but rather emerge from complex adaptive systems involving many actors and institutions operating simultaneously from local to global scales. Barriers arise at all stages of innovation, from the invention of a technology through its selection, production, adaptation, adoption, and retirement. Second, learning from past efforts to mobilize innovation for sustainable development can be greatly improved through structured cross-sectoral comparisons that recognize the socio-technical nature of innovation systems. Third, current institutions (rules, norms, and incentives) shaping technological innovation are often not aligned toward the goals of sustainable development because impoverished, marginalized, and unborn populations too often lack the economic and political power to shape innovation systems to meet their needs. However, these institutions can be reformed, and many actors have the power to do so through research, advocacy, training, convening, policymaking, and financing. We conclude with three practice-oriented recommendations to further realize the potential of innovation for sustainable development: (i) channels for regularized learning across domains of practice should be established; (ii) measures that systematically take into account the interests of underserved populations throughout the innovation process should be developed; and (iii) institutions should be reformed to reorient innovation systems toward sustainable development and ensure that all innovation stages and scales are considered at the outset. PMID:27519800

  16. Making technological innovation work for sustainable development.

    Science.gov (United States)

    Anadon, Laura Diaz; Chan, Gabriel; Harley, Alicia G; Matus, Kira; Moon, Suerie; Murthy, Sharmila L; Clark, William C

    2016-08-30

    This paper presents insights and action proposals to better harness technological innovation for sustainable development. We begin with three key insights from scholarship and practice. First, technological innovation processes do not follow a set sequence but rather emerge from complex adaptive systems involving many actors and institutions operating simultaneously from local to global scales. Barriers arise at all stages of innovation, from the invention of a technology through its selection, production, adaptation, adoption, and retirement. Second, learning from past efforts to mobilize innovation for sustainable development can be greatly improved through structured cross-sectoral comparisons that recognize the socio-technical nature of innovation systems. Third, current institutions (rules, norms, and incentives) shaping technological innovation are often not aligned toward the goals of sustainable development because impoverished, marginalized, and unborn populations too often lack the economic and political power to shape innovation systems to meet their needs. However, these institutions can be reformed, and many actors have the power to do so through research, advocacy, training, convening, policymaking, and financing. We conclude with three practice-oriented recommendations to further realize the potential of innovation for sustainable development: (i) channels for regularized learning across domains of practice should be established; (ii) measures that systematically take into account the interests of underserved populations throughout the innovation process should be developed; and (iii) institutions should be reformed to reorient innovation systems toward sustainable development and ensure that all innovation stages and scales are considered at the outset.

  17. Technology and Innovation in Adult Learning

    Science.gov (United States)

    King, Kathy P.

    2017-01-01

    "Technology and Innovation in Adult Learning" introduces educators and students to the intersection of adult learning and the growing technological revolution. Written by an internationally recognized expert in the field, this book explores the theory, research, and practice driving innovation in both adult learning and learning…

  18. Feasibility studies and technological innovation

    DEFF Research Database (Denmark)

    Hvelplund, Frede Kloster; Lund, Henrik; Sukkumnoed, Decharut

    2004-01-01

    The chapter offers a tool to conduct feasibility studies and focuses on how to make feasibility studies in a situation with environmental concerns, in which technological innovation and institutional chnages are among the objectives.......The chapter offers a tool to conduct feasibility studies and focuses on how to make feasibility studies in a situation with environmental concerns, in which technological innovation and institutional chnages are among the objectives....

  19. Soil washing technology evaluation

    International Nuclear Information System (INIS)

    Suer, A.

    1995-04-01

    Environmental Restoration Engineering (ERE) continues to review innovative, efficient, and cost effective technologies for SRS soil and/or groundwater remediation. As part of this effort, this technical evaluation provides review and the latest information on the technology for SRS soil remediation. Additional technology evaluation reports will be issued periodically to update these reports. The purpose of this report is to review the soil washing technology and its potential application to SRS soil remediation. To assess whether the Soil Washing technology is a viable option for SRS soil remediation, it is necessary to review the technology/process, technology advantages/limitations, performance, applications, and cost analysis

  20. Making technological innovation work for sustainable development

    OpenAIRE

    Anadon, Laura Diaz; Chan, Gabriel; Harley, Alicia G.; Matus, Kira; Moon, Suerie; Murthy, Sharmila L.; Clark, William C.

    2016-01-01

    Sustainable development requires harnessing technological innovation to improve human well-being in current and future generations. However, poor, marginalized, and unborn populations too often lack the economic or political power to shape innovation processes to meet their needs. Issues arise at all stages of innovation, from invention of a technology through its selection, production, adaptation, adoption, and retirement. Three insights should inform efforts to intervene in innovation syste...

  1. ITEP: A survey of innovative environmental restoration technologies in the Netherlands and France

    International Nuclear Information System (INIS)

    Roberds, W.J.; Voss, C.F.; Hitchcock, S.A.

    1995-05-01

    The International Technology Exchange Program (ITEP) of the Department of Energy's (DOE's) Office of Environmental Management (EM) is responsible for promoting the import of innovative technologies to better address EM's needs and the export of US services into foreign markets to enhance US competitiveness. Under this program, potentially innovative environmental restoration technologies, either commercially available or under development in the Netherlands and France, were identified, described, and evaluated. It was found that 12 innovative environmental restoration technologies, which are either commercially available or under development in the Netherlands and France, may have some benefit for the DOE EM program and should be considered for transfer to the United States

  2. Evaluative conditioning of food technologies

    DEFF Research Database (Denmark)

    Loebnitz, Natascha; Grunert, Klaus G

    2015-01-01

    Consumer attitudes play an important role in the acceptance of new technologies. The success of food innovations depends on understanding how consumers form and change attitudes toward food technologies. Earlier post hoc explanations suggest that evaluative conditioning can change consumer...... attitudes toward food technologies. The present study tests how evaluative conditioning can affect consumer acceptance of new food technologies. Furthermore, authors investigate whether evaluative conditioning is resistant to extinction after a two-month period and whether the evaluative conditioning effect...... prevails in a product-related context. Within an evaluative conditioning paradigm including between-subjects control groups in addition to standard within-subjects control conditions, participants were presented with three food technologies (conventional, enzyme, and genetic technology) paired...

  3. Technology, Innovation and Knowledge

    DEFF Research Database (Denmark)

    Andersson, Ulf; Dasi, Angels; Mudambi, Ram

    2016-01-01

    The relevance of ideas is at the core of the IB field and has been captured in concepts like technology, innovation and knowledge. While these concepts have evolved over the last decades, the point that the ideas and the international connectivity are central for IB remains genuine. This paper...... is an attempt to take stock of the evolution of the concepts technology, innovation and knowledge in IB literature along the past five decades with a particular focus on the role of the Columbia Journal of World Business (CJWB) and the Journal of World Business (JWB) in this evolution. Likewise, our objective...

  4. Financial Evaluation Techniques, Institutions and Innovation

    DEFF Research Database (Denmark)

    Howells, John

    2003-01-01

    This paper reviews the relationship between financial evaluation and control techniques and innovative activity in a range of technological contexts. The relationship is broadly conceived to include both the financial techniques developed and deployed within the firm and theevaluative behaviour...... of financial institutions external to the firm such as venture capital and industrial investment banking. With innovative and investment opportunities tending to vary over time within an industry, it becomes apparent that there can be no permanent solution to the common problem of how to trade off financial...

  5. Technology-Enhanced Physics Programme for Community-Based Science Learning: Innovative Design and Programme Evaluation in a Theme Park

    Science.gov (United States)

    Tho, Siew Wei; Chan, Ka Wing; Yeung, Yau Yuen

    2015-01-01

    In this study, a new physics education programme is specifically developed for a famous theme park in Hong Kong to provide community-based science learning to her visitors, involving her three newly constructed rides. We make innovative use of digital technologies in this programme and incorporate a rigorous evaluation of the learning…

  6. DOE's Innovative Treatment Remediation Demonstration Program accelerating the implementation of innovative technologies

    International Nuclear Information System (INIS)

    Hightower, M.

    1995-01-01

    A program to help accelerate the adoption and implementation of new and innovative remediation technologies has been initiated by the Department of Energy's (DOE) Environmental Restoration Program Office (EM40). Developed as a Public-Private Partnership program in cooperation with the US Environmental Protection Agency's (EPA) Technology Innovation Office (TIO) and coordinated by Sandia National Laboratories, the Innovative Treatment Remediation Demonstration (ITRD) Program attempts to reduce many of the classic barriers to the use of new technologies by involving government, industry, and regulatory agencies in the assessment, implementation, and validation of innovative technologies. In this program, DOE facilities work cooperatively with EPA, industry, national laboratories, and state and federal regulatory agencies to establish remediation demonstrations using applicable innovative technologies at their sites. Selected innovative technologies are used to remediate small, one to two acre, sites to generate the full-scale and real-world operating, treatment performance, and cost data needed to validate these technologies and gain acceptance by industry and regulatory agencies, thus accelerating their use nationwide. Each ITRD project developed at a DOE site is designed to address a typical soil or groundwater contamination issue facing both DOE and industry. This includes sites with volatile organic compound (VOC), semi-VOC, heavy metal, explosive residue, and complex or multiple constituent contamination. Projects are presently underway at three DOE facilities, while additional projects are under consideration for initiation in FY96 at several additional DOE sites. A brief overview of the ITRD Program, program plans, and the status and progress of existing ITRD projects are reviewed in this paper

  7. Innovative Technologies for the Solution of Environmental Problems in the World Community

    Directory of Open Access Journals (Sweden)

    T. K. Usmanova

    2017-01-01

    Full Text Available Purpose: the purpose of the article is the disclosure of environmental problems and prospects commercialization of intellectual property within development of innovative information technologies in the conditions of integration of economies into the world economy, identification of opportunities of forming, organization, financing, management, ownership, commercialization and protection of innovative technologies and intellectual property. Relevance of the chosen subject is caused by the current state of ecology and problems of commercialization of intellectual property in development of innovative information technologies within the conditions of integration of economies into the world economy. The existing changes of the current legislation and tendencies of development of the industry of innovative information technologies in field of ecology in the Russian Federation require cardinal review because of its low competitiveness. Ensuring sustainable development of the country directly depends on implementation of innovative information technologies, not only within the sphere of ecology, but also in all industries of the national economy of Russia. Especially important direction of development of innovations is the field of information technologies with its further implementation in innovative productions and provision of services with a focus on protection of ecology and healthcare. Methods: the methodology of the solution of objectives is based on usage of a method of dialectic research, methods of the economic analysis, forecasting, the situational and systemic analysis, expert evaluations and the analysis of empirical data. Results: in the process of researching the direction of solving environmental problems, the author studied foreign and Russian programs based on innovative technologies in this field and identified current proposals regarding the practical implementation of partnerships in the form of Public Private Partnerships PPPs

  8. Digital Technologies as Education Innovation at Universities

    Science.gov (United States)

    Kryukov, Vladimir; Gorin, Alexey

    2017-01-01

    This paper analyses the use of digital technology-based education innovations in higher education. It demonstrated that extensive implementation of digital technologies in universities is the main factor conditioning the acceleration of innovative changes in educational processes, while digital technologies themselves become one of the key…

  9. Innovative sport technology through cross-disciplinary research ...

    African Journals Online (AJOL)

    Innovative sport technology through cross-disciplinary research: Future of sport ... South African Journal for Research in Sport, Physical Education and Recreation ... of the advantages and disadvantages of innovative sport technology brought ...

  10. Launching technological innovations

    DEFF Research Database (Denmark)

    Talke, Katrin; Salomo, Søren

    2009-01-01

    have received less attention. This study considers the interdependencies between strategic, internally and externally, directed tactical launch activities and investigates both direct and indirect performance effects. The analysis is based upon data from 113 technological innovations launched...

  11. Innovating Education and Educating for Innovation: The Power of Digital Technologies and Skills

    Science.gov (United States)

    OECD Publishing, 2016

    2016-01-01

    OECD's Innovation Strategy calls upon all sectors in the economy and society to innovate in order to foster productivity, growth and well-being. Education systems are critically important for innovation through the development of skills that nurture new ideas and technologies. However, whereas digital technologies are profoundly changing the way…

  12. Technology innovation and management in the US Bureau of the Census: Discussion and recommendations

    Energy Technology Data Exchange (ETDEWEB)

    Tonn, B.; Edwards, R.; Goeltz, R.; Hake, K.

    1990-09-01

    This report contains a set of recommendations prepared by Oak Ridge National Laboratory (ORNL) for the US Bureau of the Census pertaining to technology innovation and management. Technology has the potential to benefit the Bureau's data collection, capture, processing, and analysis activities. The entire Bureau was represented from Decennial Census to Economic Programs and various levels of Bureau management and numerous experts in technology. Throughout the Bureau, workstations, minicomputers, and microcomputers have found their place along side the Bureau's mainframes. The Bureau's new computer file structure called the Topologically Integrated Geographic Encoding and Referencing data base (TIGER) represents a major innovation in geographic information systems and impressive progress has been made with Computer Assisted Telephone Interviewing (CATI). Other innovations, such as SPRING, which aims to provide Bureau demographic analysts with the capability of interactive data analysis on minicomputers, are in the initial stages of development. Recommendations fall into five independent, but mutually beneficial categories. (1) The ADP Steering Committee be disbanded and replaced with The Technology Forum. (2) Establishment of a Technology Review Committee (TRC), to be composed of technology experts from outside the Bureau. (3) Designate technological gurus. These individuals will be the Bureau's experts in new and innovative technologies. (4) Adopt a technology innovation process. (5) Establish an Advanced Technology Studies Staff (ATSS) to promote technology transfer, obtain funding for technological innovation, manage innovation projects unable to find a home in other divisions, evaluate innovations that cut across Bureau organizational boundaries, and provide input into Bureau technology analyses. (JF)

  13. Examination of incentive mechanisms for innovative technologies applicable to utility and nonutility power generators

    Energy Technology Data Exchange (ETDEWEB)

    McDermott, K.A. [Illinois Commerce Commission, Springfield, IL (United States); Bailey, K.A.; South, D.W. [Argonne National Lab., IL (United States). Environmental Assessment and Information Sciences Div.

    1993-08-01

    Innovative technologies, built by either utility or nonutility power generators, have the potential to lower costs with less environmental emissions than conventional technologies. However, the public-good nature of information, along with uncertain costs, performance, and reliability, discourages rapid adoption of these technologies. The effect of regulation of electricity production may also have an adverse impact on motivation to innovate. Slower penetration of cleaner, more efficient technologies could result in greater levels of pollution, higher electricity prices, and a reduction in international competitiveness. Regulatory incentives could encourage adoption and deployment of innovative technologies of all kinds, inducting clean coal technologies. Such incentives must be designed to offset risks inherent in innovative technology and encourage cost-effective behavior. To evaluate innovative and conventional technologies equally, the incremental cost of risk (ICR) of adopting the innovative technology must be determined. Through the ICR, the magnitude of incentive required to make a utility (or nonutility) power generator equally motivated to use either conventional or innovative technologies can be derived. Two technology risks are examined: A construction risk, represented by a 15% cost overrun, and an operating risk, represented by a increased forced outage rate (decreased capacity factor). Different incentive mechanisms and measurement criteria are used to assess the effects of these risks on ratepayers and shareholders. In most cases, a regulatory incentive could offset the perceived risks while encouraging cost-effective behavior by both utility and nonutility power generators. Not only would the required incentive be recouped, but the revenue requirements would be less for the innovative technology; also, less environmental pollution would be generated. In the long term, ratepayers and society would benefit from innovative technologies.

  14. Research on the Synergy Degree of China Yangtze River Delta Region Technology Innovation System Evolution from the Perspective of Technology Innovation Chain

    Directory of Open Access Journals (Sweden)

    Xu Bin Feng

    2014-08-01

    Full Text Available Abstract: This paper divides technology innovation system into research and development input subsystem, technology research and development subsystem and technology application subsystem from the perspective of technology innovation chain, combining with the system theory. Then selects the corresponding ordinal variables, makes an empirical analysis to the synergy degree of Yangtze River delta regional technology innovation system evolution by complex system synergy degree model which based on the data of 2002-2009. The results show that the development of synergy degree of the technology innovation system appears a rising trend and the technology application subsystem is the key factor of direction and degree of synergy development in the evolution process of regional technology innovation system in the Yangtze River Delta of China. Finally, this paper analyzes the characteristics and causes of synergy degree’s evolution, and puts forward the corresponding policy recommendations to different problems.

  15. [Health technology assessment: a multidisciplinary approach for selecting innovations in the health service].

    Science.gov (United States)

    Cavallo, Maria Caterina

    2013-01-01

    Technological evolution and the increasing requests of a more qualified health care have challenged politicians to evaluate the economical sustainability of proposed innovations. The objective of government health policies is to guarantee real advances in the quality of care to all citizens. Since 1965, independent research centers have analyzed this issue for the US Congress. In 1973, Congress endorsed the establishment of an Office of Technology Assessment (OTA) to discover the best strategies for evaluating such advances. OTA have proposed the following criteria to identify possible beneficial innovations to be introduced into routine health care: effectiveness, safeness, worth, costs, cost-effectiveness ratio and cost patient-benefit ratio. This review analyzes in detail the pathway that each medical innovation follows in order to identify which technological evolutions might prove to be truly beneficial and sustainable for the community.

  16. Evaluating research for disruptive innovation in the space sector

    Science.gov (United States)

    Summerer, L.

    2012-12-01

    Many governmental space activities need to be planned with a time horizon that extends beyond the comfort zone of reliable technology development assessments and predictions. In an environment of accelerating technological change, a methodological approach to addressing non-core technology trends and potentially disruptive, game-changing developments not yet linked to the space sector is increasingly important to complement efforts in core technology R&D planning. Various models and organisational setups aimed at fulfilling this purpose are in existence. These include, with varying levels of relevance to space, the National Aeronautics and Space Administration (NASA) Institute for Advanced Concepts (NIAC, operational form 1998 to 2007 and recently re-established), the Defence Advanced Research Projects Agency of the US Department of Defence, the Massachusetts Institute of Technology (MIT) Medialab, the early versions of Starlab, the Lockheed Skunk Works and the European Space Agency's Advanced Concepts Team. Some of these organisations have been reviewed and assessed individually, though systematic comparison of their methods, approaches and results have not been published. This may be due in part to the relatively sparse scientific literature on organisational parameters for enabling disruptive innovation as well as to the lack of commonly agreed indicators for the evaluation of their performance. Furthermore, innovation support systems in the space sector are organised differently than in traditional, open competitive markets, which serve as the basis for most scholarly literature on the organisation of innovation. The present paper is intended to advance and stimulate discussion on the organisation of disruptive innovation mechanisms specifically for the space sector. It uses the examples of the NASA Institute for Advanced Concepts and the ESA Advanced Concepts Team, analyses their respective approaches and compares their results, leading to the proposal of

  17. European innovation and technology development

    International Nuclear Information System (INIS)

    Johnson, R.W.

    1991-01-01

    The promotion of technological innovation by European national governments and the EC in pursuit of both increased recovery and the anchoring of technology in supply, manufacturing and service sector companies has been a feature of the strategic involvement by European states in exploration and production research and development. This paper summaries past trends in this activity and reviews the targets for future industry innovation which will enable European (primarily the North Sea) production to be sustained for a further generation

  18. Demand pull and technology push perspective in technology-based innovations for the points of sale : the retailers evaluation

    NARCIS (Netherlands)

    Pantano, E.; Viassone, M.

    Despite the consumers' increasing demand of technology-based innovations for making stores more appealing and the huge availability of advanced technologies, there is still a lack of research on the retailers' and employees' points of views towards the introduction of these systems. In fact, an

  19. Quantification of Technology Innovation Usinga Risk-Based Framework

    OpenAIRE

    Gerard E. Sleefe

    2010-01-01

    There is significant interest in achieving technology innovation through new product development activities. It is recognized, however, that traditional project management practices focused only on performance, cost, and schedule attributes, can often lead to risk mitigation strategies that limit new technology innovation. In this paper, a new approach is proposed for formally managing and quantifying technology innovation. This approach uses a risk-based framework that s...

  20. Policy and innovation: Nanoenergy technology in the USA and China

    International Nuclear Information System (INIS)

    Liu, Na; Guan, JianCheng

    2016-01-01

    The USA is a leading country while China is an up-and-coming one in nanotechnology. We carried out a cross-country comparative study on policy and innovation of the two countries in subset nanoenergy field. They both created favorable policy environments for nanotechnology involving applications of nanotechnology in the energy sector. However, Chinese policy deployments for nanotechnology lack coordinated arrangements and effective assessment mechanisms. China performs better than the USA in technological quantity, but weaker in technological influence. The USA expresses an industry-oriented model in nanoenergy technological research and development, but China exhibits a university-and-institute-oriented model. Interorganizational collaboration relationships in the two countries are both still very rare and have huge development space. They both have a long way to go in converting their technological achievements into commercial products, especially China. Finally, we provide the policy implications of this study. In particular, the Chinese government should strengthen its efforts in policies by changing the national S&T evaluation system to set up the basic idea that quality is better than quantity in order to raise the original innovation motivations of innovators. - Highlights: •We compare development status of nanoenergy technologies between China and the USA. •We mainly focus on their policies, innovation performance and pattern in nanoenergy. •Differences are observed in nanoenergy technologies developed in these two countries. •We propose their endeavor directions in nanoenergy based on this study.

  1. The Methodological Foundations of the Economic Evaluation of the Level of Intensification of the Innovative Processes at Industrial Enterprise in the Part of Technical-Technological Subsystem

    Directory of Open Access Journals (Sweden)

    Plakhotnik Olena О.

    2017-04-01

    Full Text Available Regularities of technocratic changes define the change of technological methods of production and technological modes at the level of the stages of development of a production enterprise. An important role occupies the commercialization of technical-technological innovation. The article allocates the directions of impact on commodity markets and the production enterprises, which are operating there. It is using the exclusive rights tool will meet the challenges of changes in the structure of the national economy so as to increase the level of its competitiveness on the world market. The article proposes the improved methodological approach to forming a system of analytical indicators for evaluating the economic efficiency of the level of intensification of the technical-technological innovation processes at industrial enterprise, based on reasonable conditions and factors of innovation development of industrial enterprise, models of quantitative measuring the efficiency of innovative projects. Applying this approach would improve the efficiency of use of the technical-technological innovations of the industrial enterprises, having increased the profitability of intellectual activity.

  2. Policies for the Energy Technology Innovation System (ETIS)

    NARCIS (Netherlands)

    Grubler, A.; Aguayo, F.; Gallagher, K.; Hekkert, M.P.; Jiang, K.; Mytelka, L.; Neij, L.; Nemet, G.; Wilson, C.

    2012-01-01

    Innovation and technological change are integral to the energy system transformations described in the Global Energy Assessment (GEA) pathways. Energy technology innovations range from incremental improvements to radical breakthroughs and from technologies and infrastructure to social institutions

  3. Emerging Technological Risk Underpinning the Risk of Technology Innovation

    CERN Document Server

    Anderson, Stuart

    2012-01-01

    Classes of socio-technical hazards allow a characterization of the risk in technology innovation and clarify the mechanisms underpinning emergent technological risk. Emerging Technological Risk provides an interdisciplinary account of risk in socio-technical systems including hazards which highlight: ·         How technological risk crosses organizational boundaries, ·         How technological trajectories and evolution develop from resolving tensions emerging between social aspects of organisations and technologies and ·         How social behaviour shapes, and is shaped by, technology. Addressing an audience from a range of academic and professional backgrounds, Emerging Technological Risk is a key source for those who wish to benefit from a detail and methodical exposure to multiple perspectives on technological risk. By providing a synthesis of recent work on risk that captures the complex mechanisms that characterize the emergence of risk in technology innovation, Emerging Tec...

  4. Understanding energy technology developments from an innovation system perspective

    Energy Technology Data Exchange (ETDEWEB)

    Borup, M.; Nygaard Madsen, A. [Risoe National Lab., DTU, Systems Analysis Dept., Roskilde (Denmark); Gregersen, Birgitte [Aalborg Univ., Department of Business Studies (Denmark)

    2007-05-15

    With the increased market-orientation and privatisation of the energy area, the perspective of innovation is becoming more and more relevant for understanding the dynamics of change and technology development in the area. A better understanding of the systemic and complex processes of innovation is needed. This paper presents an innovation systems analysis of new and emerging energy technologies in Denmark. The study focuses on five technology areas: bio fuels, hydrogen technology, wind energy, solar cells and energy-efficient end-use technologies. The main result of the analysis is that the technology areas are quite diverse in a number of innovation-relevant issues like actor set-up, institutional structure, maturity, and connections between market and non-market aspects. The paper constitutes background for discussing the framework conditions for transition to sustainable energy technologies and strengths and weaknesses of the innovation systems. (au)

  5. Information and Innovation Management within Information Technology Enterprises

    OpenAIRE

    Geoff D. Skinner

    2010-01-01

    Australia, while being a large and eager consumer of innovative and cutting edge Information and Communication Technologies (ICT), continues to struggle to remain a leader in Technological Innovation. This paper has two main contributions to address certain aspects of this complex issue. The first being the current findings of an ongoing research project on Information and Innovation Management in the Australian Information and Communication Technologies (ICT) sector. The...

  6. CRITERIA FOR EVALUATING INNOVATION ACTIVITY AND CHALLENGES IN DEFINING IT

    Directory of Open Access Journals (Sweden)

    A. T. Volkov

    2017-01-01

    Full Text Available The article presents polemically the peculiarities of using the indicators of innovation activity for evaluating the state and outcomes of the organization’s operation, including Higher Learning Institutions in the areas of development and learning new types of techniques and technology. There is considered a possible structure of a system of balanced innovation activity indicators. There is substantiated a necessity to change statistical reporting on the innovation activity.

  7. Innovation in nuclear energy technology

    International Nuclear Information System (INIS)

    Dujardin, Th.; Bertel, E.; Kwang Seok, Lee; Foskolos, K.

    2007-01-01

    Innovation has been a driving force for the success of nuclear energy and remains essential for its sustainable future. Many research and development programmes focus on enhancing the performance of power plants in operation, current fuel design and characteristics, and fuel cycle processes used in existing facilities. Generally performed under the leadership of the industry. Some innovation programmes focus on evolutionary reactors and fuel cycles, derived from systems of the current generation. Such programmes aim at achieving significant improvements, in the field of economics or resource management for example, in the medium term. Often, they are undertaken by the industry with some governmental support as they require basic research together with technological development and adaptation. Finally, large programmes, often undertaken in an international, intergovernmental framework are devoted to design and development of a new generation of systems meeting the goals of sustainable development in the long term. Driving forces for nuclear innovation vary depending on the target technology, the national framework and the international context surrounding the research programme. However, all driving factors can be grouped in three categories: market drivers, political drivers and technology drivers. Globally, innovation in the nuclear energy sector is a success story but is a lengthy process that requires careful planning and adequate funding to produce successful outcomes

  8. Innovating beyond Technology : Studies on how management innovation, co-creation and business model innovation contribute to firms' (innovation) performance

    NARCIS (Netherlands)

    C.V. Heij (Kevin)

    2015-01-01

    textabstractInnovation is generally considered to be a cornerstone of organizational survival in many of today’s dynamic and competitive markets. This dissertation goes beyond the dominant focus on technological innovation in innovation studies by examining how and under which conditions several

  9. Problems forming innovative-technological image of russian regions

    Directory of Open Access Journals (Sweden)

    Irina Markovna Golova

    2012-06-01

    Full Text Available In this paper, actual problems of innovative-technological image as a key element of the mechanism of the healing sources of socioeconomic development of the Russian regionsare considered. The author gives an assessment of the level of differentiation of subjects of the Russian Federation on the potential for innovative development. Trends in spatial transformations of thescientific and technical and innovation capacities of the country are analyzedand reasons of low innovational activity of Russian enterprises are disclosed. Basic conditions for the success of actions to create an attractive image of innovative-technological territory are formulated. Special attention is paid to the position of regions as participants in the innovational processes, creating preconditions for creativity, harmonization of spatial priorities of innovation, technological and socio-economic development, support for the development of new high-tech industries, improvement of inter-budgetary relations. There are proved priority areas of state policy to reduce barriers to the realization of an innovative paradigm for development of Russian society and effective inclusion of local communities in the implementation of innovative changes.

  10. Teaching biomedical technology innovation as a discipline.

    Science.gov (United States)

    Yock, Paul G; Brinton, Todd J; Zenios, Stefanos A

    2011-07-20

    Recently, universities in the United States and abroad have developed dedicated educational programs in life science technology innovation. Here, we discuss the two major streams of educational theory and practice that have informed these programs: design thinking and entrepreneurship education. We make the case that the process of innovation for new medical technologies (medtech) is different from that for biopharmaceuticals and outline the challenges and opportunities associated with developing a discipline of medtech innovation.

  11. Game-Like Technology Innovation Education

    Science.gov (United States)

    Magnussen, Rikke

    2011-01-01

    This paper examines the methodological challenges and perspectives of designing game-like scenarios for the implementation of innovation processes in school science education. This paper presents a design-based research study of a game-like innovation scenario designed for technology education for Danish public school students aged 13-15. Students…

  12. Environmental regulation and technological innovation

    Energy Technology Data Exchange (ETDEWEB)

    Farrell, A.E. [Carnegie Mellon Electricity Industry Center, Pittsburg, PA (United States)

    2002-07-01

    Government policies are a major factor in the determination of structural conditions of competition. The innovative activity comprises the following: invention, adoption, and diffusion. Invention involves research and development activities such as patenting, research and development budgets. The adoption phase is concerned with deployment. As for the diffusion phase, it involves commercialization, and scale-economies. The process of introducing new technologies that are adopted by small numbers of customers in a niche market was explained. Once costs are lowered through experience gained in designing, manufacturing and servicing the new technology, mew applications generally lead to larger markets. Environmental technologies have no early adopters, implying that governments have an important role to play. However, commercial processes are not normally as well known to government as it is to the private sector. The electoral cycle also interferes with long term research and development efforts for technological clusters. A look at sulphur dioxide control at United States power plants illustrated the problem. The author then explained the reasons behind low allowance prices. Low-sulphur western coal was rendered economic in large areas of the United States by rail deregulation. Electricity restructuring was also a factor. The author indicated that binding government regulation must come before adoption and diffusion of emission controls. A summary of recent research was provided, in which the author stated that no single policy instrument was likely to properly stimulate innovative activity. In those cases where both supply and demand are stimulated by government, the technological innovation is greatest. Stringent regulations induce innovation, as do greater flexibility and greater regulatory certainty. Knowledge transfer within the industry is vital. 8 refs., 3 figs.

  13. Seeds of Innovation: Three Years of the Technology Innovation Challenge Grant Program.

    Science.gov (United States)

    Harris, Larry A.

    This publication describes the 62 projects that received 5-year Technology Innovation Challenge Grants beginning in 1995, 1996, and 1997, with reviews of the projects occurring in late 1999 and early 2000. Part 1 of the report describes the Technology Innovation Challenge Grant (TICG) program and its importance. Part 2 contains the project…

  14. Innovative technology demonstration

    International Nuclear Information System (INIS)

    Anderson, D.B.; Luttrell, S.P.; Hartley, J.N.; Hinchee, R.

    1992-04-01

    The Innovative Technology Demonstration (ITD) program at Tinker Air Force Base (TAFB), Oklahoma City, Oklahoma, will demonstrate the overall utility and effectiveness of innovative technologies for site characterization, monitoring, and remediation of selected contaminated test sites. The current demonstration test sites include a CERCLA site on the NPL list, located under a building (Building 3001) that houses a large active industrial complex used for rebuilding military aircraft, and a site beneath and surrounding an abandoned underground tank vault used for storage of jet fuels and solvents. The site under Building 3001 (the NW Test Site) is contaminated with TCE and Cr +6 ; the site with the fuel storage vault (the SW Tanks Site) is contaminated with fuels, BTEX and TCE. These sites and others have been identified for cleanup under the Air Force's Installation Restoration Program (IRP). This document describes the demonstrations that have been conducted or are planned for the TAFB

  15. The Kyoto Mechanisms and Technological Innovation

    DEFF Research Database (Denmark)

    Lund, Henrik

    2003-01-01

    Climate change response, including implementation of the Kyoto targets as the first step, calls for technological innovation of future sustainable energy systems. One of the important agreements in several declarations, including the Kyoto protocol, has been to promote and coordinate...... the collaboration between the countries in the necessary technological development. The paper encourage that the Kyoto mechanisms will be used for acceleration of the necessary technical innovation in Denmark....

  16. Study on commercial FBR concepts by combining innovative technologies

    International Nuclear Information System (INIS)

    Miura, M.; Inagaki, T.; Kuroha, M.; Hida, T.

    1992-01-01

    A study was conducted on future prospects of FBR commercialization. Targets of further improving safety and economy were set to make commercial power plants that would be superior to future LWRs. Promising innovative technologies studied domestically and overseas were extracted by evaluating prospects for commercialization, effect, and plant applicability. Several commercial plants were conceptualized by introducing such technology to large-scale and oxide-fuel reactors. Estimates of construction cost, etc., proved that the targets could be achieved. A concept of long-term technological development was synthesized. (author)

  17. The development strategy of financial and innovative technologies

    OpenAIRE

    R.V. Lavrov

    2013-01-01

    The aim of the article. The aim of the article is to define and to estimate the forming of expediency of the development strategy of financial and innovative technologies in the context of modern economic space realities.The results of the analysis. The growing importance of the financial sector in the contemporary economic space, as well as rapid changes in it, generates a need for financial innovative technologies. Development strategy of financial and innovative technologies is always asso...

  18. The Evaluation of Innovation in the IT Service Sector: Methodological and Empirical Aspects

    Directory of Open Access Journals (Sweden)

    Eglė Kazlauskienė

    2013-08-01

    Full Text Available Purpose — Nowadays services are comprehended as the key factor for economic activity, growth and employment. Developed economies are service-dominated though little is known about the innovation details in the service sector and this study field has been neglected for a while. The innovation in service sector activities needs to be thoroughly evaluated because innovation is an interconnected process and cannot be defined using one or few indicators. IT services are an integral part of contemporary life, particularly for business. It can be introduced and implemented in all fields, especially when the world is becoming more multidimensional. Innovation performance in the IT sector has been under-researched, despite the fact that IT service sector plays the innovation disseminator role in other sectors by appliance of IT products. Design/methodology/approach — Based on scientific literature and methodological aspects analyses, an empirical research methodology was designed and the qualitative research on innovation in information technology service sector was accomplished. Findings — The article presents methodological aspects of innovation evaluation in service sector and empirical aspects on innovation implementation and development in the IT service companies in Lithuania. Research limitations/implications — For more comprehensive understanding of innovation in service sector, especially in IT services, the theory of service innovation is necessary. Deeper understanding and perspectives on how innovation benefits the information technology sector should be revealed in further researches and the multi-country analysis is needed. Practical implications — The finding of the paper can be used to improve the development of innovation in information technology service companies and create a model for more exhaustive multi-country empirical researches. Originality/value — The impact of innovation and its development in information

  19. Innovative technologies in primary school

    Directory of Open Access Journals (Sweden)

    Lyzentsova L.A.

    2017-01-01

    Full Text Available this article describes innovative technologies during the classes in elementary school. The author has noted that the introduction of new technology promotes the development of education and the student's desire to learn and fosters independence, initiative and tolerance.

  20. iTEC: Conceptualising, Realising and Recognising Pedagogical and Technological Innovation in European Classrooms

    Science.gov (United States)

    Cranmer, Sue; Lewin, Cathy

    2017-01-01

    Innovation, a complex concept, underpinned a four-year pan-European research project designed to increase the effective use of technology in school classrooms. This article revisits evaluation data collected during the project and explores the challenges of conceptualising, realising and researching "innovation." The authors describe how…

  1. Technology and Innovation Management in Higher Education

    DEFF Research Database (Denmark)

    Morales, Antonio Adrián Arciénaga; Nielsen, Janni; Bacarini, Hernán Alberto

    2018-01-01

    different ways to obtain a panoply of competencies to identify technology and innovation management issues at individual business and regional level, particularly for small-and-medium-sized enterprises (SMEs). The model addresses innovation challenges related to new innovative relationships and product...

  2. [Innovative technology and blood safety].

    Science.gov (United States)

    Begue, S; Morel, P; Djoudi, R

    2016-11-01

    If technological innovations are not enough alone to improve blood safety, their contributions for several decades in blood transfusion are major. The improvement of blood donation (new apheresis devices, RFID) or blood components (additive solutions, pathogen reduction technology, automated processing of platelets concentrates) or manufacturing process of these products (by automated processing of whole blood), all these steps where technological innovations were implemented, lead us to better traceability, more efficient processes, quality improvement of blood products and therefore increased blood safety for blood donors and patients. If we are on the threshold of a great change with the progress of pathogen reduction technology (for whole blood and red blood cells), we hope to see production of ex vivo red blood cells or platelets who are real and who open new conceptual paths on blood safety. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

  3. CONSTRUCTION TECHNOLOGY DIFFUSION IN DEVELOPING COUNTRIES: LIMITATIONS OF PREVAILING INNOVATION SYSTEMS

    Directory of Open Access Journals (Sweden)

    Emilia van Egmond-deWilde de Ligny

    2008-12-01

    Full Text Available The diffusion of innovative technologies in the market is usually a complex and difficult process with a varying degree of success and the effects of the diffused innovative technologies are very un-balanced. The objective of our research is to gain insight into the reasons why the diffusion of innovative technology fails, even though they promise a superior performance compared to incumbent technologies. Drawing on innovation systems theories, we have identified and used the concepts of technological regime, actor network and technology sets to analyze technology diffusion in a case study in the dwelling construction industry in Costa Rica. The results showed bottlenecks in the prevailing innovation system that curtailed the diffusion of an innovative construction technology.

  4. Innovation and technology transfer in the health sciences: a cross-sectional perspective.

    Science.gov (United States)

    Blanch, L; Guerra, L; Lanuza, A; Palomar, G

    2014-11-01

    This article is based on the strategic reflection and discussion that took place on occasion of the first conference on innovation and technology transfer in the health sciences organized by the REGIC-ENS-FENIN-SEMICYUC and held in Madrid in the Instituto de Salud Carlos III on May 7th, 2013, with the aim of promoting the transfer of technological innovation in medicine and health care beyond the European program "Horizon 2020". The presentations dealt with key issues such as evaluation of the use of new technologies, the need to impregnate the decisions related to adoption and innovation with the concepts of value and sustainability, and the implication of knowledge networks in the need to strengthen their influence upon the creation of a "culture of innovation" among health professionals. But above all, emphasis was placed on the latent innovation potential of hospitals, and the fact that these, being the large companies that they are, should seriously consider that much of their future sustainability may depend on proper management of their ability to generate innovation, which is not only the generation of ideas but also their transformation into products or processes that create value and economic returns. Copyright © 2014 Elsevier España, S.L.U. and SEMICYUC. All rights reserved.

  5. Solar Preheated Ventilation - Innovative Solar Technology

    National Research Council Canada - National Science Library

    Gaberson, Howard

    1999-01-01

    .... This innovative technology applies to both new construction or rehabilitation projects. This TDS introduces this low maintenance solar technology for consideration in all future industrial ventilation or HVAC projects...

  6. The technological innovation case of the KAERI

    Energy Technology Data Exchange (ETDEWEB)

    Choi, J. I. [Habat Univ., Daejeon (Korea, Republic of); Jang, S. K. [Sungkonghoe Univ., Seoul (Korea, Republic of); Hong, K. P. [Baekseok Univ., Chunan (Korea, Republic of); Lee, E. S. [National Fusion Research Institue, Daejeon (Korea, Republic of)

    2008-01-15

    The research aims to investigate what key success factors (KSFs) of technological innovation in KAERI are, and to suggest how these findings are utilized for KAERI. In order to achieve these goals we have employed case study based on in-depth interview and literature review. And there are two fields of research in KAERI: one is nuclear energy-related research, the other is non energy-related research. The former is 'nuclear fuel cladding tube' which is an industrial product and being regarded as catch-up (or imitative) mode of technological innovation: the latter is 'HemoHIM', herbal composition of health functional food, which is consumer goods and regarded as creative (or innovative) mode of technological innovation. We found some KSFs in these two research and development cases in KAERI: firstly, to train researcher to be a 'product champion' who can fill in the gap of 'death valley' between pure research and commercialization: secondly, to build researchers' competency in order to catch up advanced countries' technological competencies. Thirdly, to amend institutional rules and regulations for commercializing processes of R and D outcomes, notably 'R and D joint venture by Government Research Institute (GRI) and private sector' fourthly, to enhance the capabilities of external management for researchers' technological innovation competency. And finally, we recommend using successful R and D cases as educational materials when training young researchers for sharing old generations' experiences and tacit knowledge.

  7. The technological innovation case of the KAERI

    International Nuclear Information System (INIS)

    Choi, J. I.; Jang, S. K.; Hong, K. P.; Lee, E. S.

    2008-01-01

    The research aims to investigate what key success factors (KSFs) of technological innovation in KAERI are, and to suggest how these findings are utilized for KAERI. In order to achieve these goals we have employed case study based on in-depth interview and literature review. And there are two fields of research in KAERI: one is nuclear energy-related research, the other is non energy-related research. The former is 'nuclear fuel cladding tube' which is an industrial product and being regarded as catch-up (or imitative) mode of technological innovation: the latter is 'HemoHIM', herbal composition of health functional food, which is consumer goods and regarded as creative (or innovative) mode of technological innovation. We found some KSFs in these two research and development cases in KAERI: firstly, to train researcher to be a 'product champion' who can fill in the gap of 'death valley' between pure research and commercialization: secondly, to build researchers' competency in order to catch up advanced countries' technological competencies. Thirdly, to amend institutional rules and regulations for commercializing processes of R and D outcomes, notably 'R and D joint venture by Government Research Institute (GRI) and private sector' fourthly, to enhance the capabilities of external management for researchers' technological innovation competency. And finally, we recommend using successful R and D cases as educational materials when training young researchers for sharing old generations' experiences and tacit knowledge

  8. Technology for Innovation in Radiation Oncology

    Energy Technology Data Exchange (ETDEWEB)

    Chetty, Indrin J. [Department of Radiation Oncology, Henry Ford Hospital, Detroit, Michigan (United States); Martel, Mary K., E-mail: mmartel@mdanderson.org [Department of Radiation Physics, University of Texas MD Anderson Cancer Center, Houston, Texas (United States); Jaffray, David A. [Departments of Radiation Oncology and Medical Biophysics, Princess Margaret Hospital, Toronto, Ontario (Canada); Benedict, Stanley H. [Department of Radiation Oncology, University of California – Davis Cancer Center, Sacramento, California (United States); Hahn, Stephen M. [Department of Radiation Oncology, University of Texas MD Anderson Cancer Center, Houston, Texas (United States); Berbeco, Ross [Department of Radiation Oncology, Brigham and Women' s Hospital, Boston, Massachusetts (United States); Deye, James [Radiation Research Programs, National Cancer Institute, Bethesda, Maryland (United States); Jeraj, Robert [Department of Medical Physics, University of Wisconsin, Madison, Wisconsin (United States); Kavanagh, Brian [Department of Radiation Oncology, University of Colorado, Aurora, Colorado (United States); Krishnan, Sunil [Department of Radiation Oncology, University of Texas MD Anderson Cancer Center, Houston, Texas (United States); Lee, Nancy [Department of Radiation Oncology, Memorial Sloan Kettering Cancer Center, New York, New York (United States); Low, Daniel A. [Department of Radiation Oncology, University of California – Los Angeles, Los Angeles, California (United States); Mankoff, David [Department of Radiology, University of Washington Medical School, Seattle, Washington (United States); Marks, Lawrence B. [Department of Radiation Oncology, University of North Carolina Hospitals, Chapel Hill, North Carolina (United States); Ollendorf, Daniel [Institute for Clinical and Economic Review, Boston, Massachusetts (United States); and others

    2015-11-01

    Radiation therapy is an effective, personalized cancer treatment that has benefited from technological advances associated with the growing ability to identify and target tumors with accuracy and precision. Given that these advances have played a central role in the success of radiation therapy as a major component of comprehensive cancer care, the American Society for Radiation Oncology (ASTRO), the American Association of Physicists in Medicine (AAPM), and the National Cancer Institute (NCI) sponsored a workshop entitled “Technology for Innovation in Radiation Oncology,” which took place at the National Institutes of Health (NIH) in Bethesda, Maryland, on June 13 and 14, 2013. The purpose of this workshop was to discuss emerging technology for the field and to recognize areas for greater research investment. Expert clinicians and scientists discussed innovative technology in radiation oncology, in particular as to how these technologies are being developed and translated to clinical practice in the face of current and future challenges and opportunities. Technologies encompassed topics in functional imaging, treatment devices, nanotechnology, and information technology. The technical, quality, and safety performance of these technologies were also considered. A major theme of the workshop was the growing importance of innovation in the domain of process automation and oncology informatics. The technologically advanced nature of radiation therapy treatments predisposes radiation oncology research teams to take on informatics research initiatives. In addition, the discussion on technology development was balanced with a parallel conversation regarding the need for evidence of efficacy and effectiveness. The linkage between the need for evidence and the efforts in informatics research was clearly identified as synergistic.

  9. Technology for Innovation in Radiation Oncology

    International Nuclear Information System (INIS)

    Chetty, Indrin J.; Martel, Mary K.; Jaffray, David A.; Benedict, Stanley H.; Hahn, Stephen M.; Berbeco, Ross; Deye, James; Jeraj, Robert; Kavanagh, Brian; Krishnan, Sunil; Lee, Nancy; Low, Daniel A.; Mankoff, David; Marks, Lawrence B.; Ollendorf, Daniel

    2015-01-01

    Radiation therapy is an effective, personalized cancer treatment that has benefited from technological advances associated with the growing ability to identify and target tumors with accuracy and precision. Given that these advances have played a central role in the success of radiation therapy as a major component of comprehensive cancer care, the American Society for Radiation Oncology (ASTRO), the American Association of Physicists in Medicine (AAPM), and the National Cancer Institute (NCI) sponsored a workshop entitled “Technology for Innovation in Radiation Oncology,” which took place at the National Institutes of Health (NIH) in Bethesda, Maryland, on June 13 and 14, 2013. The purpose of this workshop was to discuss emerging technology for the field and to recognize areas for greater research investment. Expert clinicians and scientists discussed innovative technology in radiation oncology, in particular as to how these technologies are being developed and translated to clinical practice in the face of current and future challenges and opportunities. Technologies encompassed topics in functional imaging, treatment devices, nanotechnology, and information technology. The technical, quality, and safety performance of these technologies were also considered. A major theme of the workshop was the growing importance of innovation in the domain of process automation and oncology informatics. The technologically advanced nature of radiation therapy treatments predisposes radiation oncology research teams to take on informatics research initiatives. In addition, the discussion on technology development was balanced with a parallel conversation regarding the need for evidence of efficacy and effectiveness. The linkage between the need for evidence and the efforts in informatics research was clearly identified as synergistic.

  10. Reasons for adopting technological innovations reducing physical workload in bricklaying

    NARCIS (Netherlands)

    Jong, A.M. de; Vink, P.; Kroon, J.C.A. de

    2003-01-01

    In this paper the adoption of technological innovations to improve the work of bricklayers and bricklayers' assistants is evaluated. Two studies were performed among 323 subjects to determine the adoption of the working methods, the perceived workload, experiences with the working methods, and the

  11. Towards a synergic innovation management model: the interplay of market, technology, and management innovations

    Directory of Open Access Journals (Sweden)

    Leonard Tchuta

    2017-03-01

    Full Text Available This paper outlines a model of firm innovation management known as the synergic innovation management model. Building on the theory of dynamic capabilities and core competence, the paper suggest three capabilities of firms namely market, technology, management capabilities that drive firms’ innovations. The combination of these three capabilities creates a unique configuration for a firm known as the firm’s core competence that informs the firm's strategic decisions. The synergic innovation management model guides firm in the simultaneous exploration of market, technology, and management innovations required for sustainable business. The paper concludes with limitations of the model and suggestions for further research.

  12. Innovative technologies for the remediation of transuranic- contaminated landfills

    International Nuclear Information System (INIS)

    Kostelnik, K.M.

    1995-01-01

    The US Department of Energy (DOE) has initiated a comprehensive research,development, demonstration, testing and evaluation program to provide innovative technology systems to achieve its environmental management responsibilities. The Office of Technology Development (OTD) is responsible for this research in support of the Offices of Environmental Restoration and Waste Management efforts. In fiscal year (FY) 1992 the OTD established the Buried Waste Integrated Demonstration (BWID). The BWID mission was to support the development of emerging technologies for their application to the remediation of DOE buried waste site. During FY95, the BWID program was transitioned into a larger program which will focus its attention to DOE Landfills and Contaminated Soils. There search and activities formerly referred to as the BWID will now be associated with the Transuranic-contaminated Arid Landfill Stabilization Program.(TALS). The TALS Program supports these buried waste remediation efforts by seeking out the best talent to solve the technology challenges as identified in baseline remediation strategies. Experts from throughout the DOE complex, universities, private sector, and the international community are being included in this program to solve these challenges and ensure implementation and commercialization of innovative technologies

  13. Efficiency of the supply chain collaborative technological innovation in China: An empirical study based on DEA analysis

    Directory of Open Access Journals (Sweden)

    Huaping Zhang

    2015-11-01

    Full Text Available Purpose: This paper is an attempt to investigate the current issues and development of the supply chain collaborative technological innovation in China. Design/methodology/approach: DEA is employed to measure the efficiency of the supply chain collaborative technological innovation. Findings: From the results of this research, we can get the conclusion that there are big spaces for improvement for the selected companies in terms of supply chain collaborative technological innovation, especially in the collaborative benefit aspect. The efficiencies of the supply chain collaborative technological innovation in the selected companies vary a lot. Research limitations: More industries are needed to generalize the conclusions. Practical implications: Our practical recommendations for improving supply chain companies in terms of improving their collaborative technological innovation efficiency are: (1 expanding the cooperative scope; (2 optimizing the collaboration operations; (3 improving the compactness in supply chain; (4 increasing the innovation input; and (5 improving the knowledge exchange capacity. Originality/value: The evaluation and the measure of the efficiency of performance of the collaborative technological innovation both in theory and in practice have been proven to be very important and quite complex, and there have been limited researches in the current literature. From observations, however, the efficiency of supply chain collaborative technological innovation is relatively low. This research investigates the current issues and development of the supply chain collaborative technological innovation in China, and provides the guideline in terms of improving the efficiency of supply chain collaborative technological innovation.

  14. Technological innovations: from bench to bedside.

    Science.gov (United States)

    Robert, Glenn

    2009-09-01

    The NHS is perceived to be slower than other healthcare systems in adopting innovative technologies that can deliver patient benefits. This article summarises what is known about the role of nurses in assimilating such innovations into clinical care, and outlines the challenges facing nurse leaders.

  15. Global Health Innovation Technology Models

    Directory of Open Access Journals (Sweden)

    Kimberly Harding

    2016-04-01

    Full Text Available Chronic technology and business process disparities between High Income, Low Middle Income and Low Income (HIC, LMIC, LIC research collaborators directly prevent the growth of sustainable Global Health innova‐ tion for infectious and rare diseases. There is a need for an Open Source-Open Science Architecture Framework to bridge this divide. We are proposing such a framework for consideration by the Global Health community, by utiliz‐ ing a hybrid approach of integrating agnostic Open Source technology and healthcare interoperability standards and Total Quality Management principles. We will validate this architecture framework through our programme called Project Orchid. Project Orchid is a conceptual Clinical Intelligence Exchange and Virtual Innovation platform utilizing this approach to support clinical innovation efforts for multi-national collaboration that can be locally sustainable for LIC and LMIC research cohorts. The goal is to enable LIC and LMIC research organizations to acceler‐ ate their clinical trial process maturity in the field of drug discovery, population health innovation initiatives and public domain knowledge networks. When sponsored, this concept will be tested by 12 confirmed clinical research and public health organizations in six countries. The potential impact of this platform is reduced drug discovery and public health innovation lag time and improved clinical trial interventions, due to reliable clinical intelligence and bio-surveillance across all phases of the clinical innovation process.

  16. User requirements for innovative nuclear reactors and fuel cycle technologies in the area of economics, environment, safety, waste management, proliferation resistance and cross cutting issues, and methodology for innovative technologies assessment

    International Nuclear Information System (INIS)

    Kupitz, Juergen; Depisch, Frank; Allan, Colin

    2003-01-01

    The IAEA General Conference in 2000 has invited ''all interested Member States to combine their efforts under the aegis of the Agency in considering the issues of the nuclear fuel cycle, in particular by examining innovative and proliferation-resistant nuclear technology''. In response to this invitation, the IAEA initiated an ''International Project on Innovative Nuclear Reactors and Fuel Cycles'', INPRO. The overall objectives of INPRO is to help to ensure that nuclear energy is available to contribute in fulfilling in a sustainable manner energy needs in the 21st century, and to bring together all interested Member States, both technology holders and technology users, to consider jointly the international and national actions required to achieve desired innovations in nuclear reactors and fuel cycles that use sound and economically competitive technology. Phase-I of INPRO was initiated in May 2001. During Phase-I, work was subdivided in two sub phase: Phase 1A (finished in June 2003) and Phase 1B (started in June 2003). Phase 1A dealt with the definition of Basic Principles, User Requirements and Criteria, and the development of a methodology for the evaluation of innovative nuclear technologies. In Phase 1A, task groups for several areas were established: (a) Prospects and Potentials of Nuclear Power, (b) Economics; (c) Sustainability and Environment, (d) Safety of Nuclear Installations, (e) Waste Management, (f) Proliferation Resistance, (g) Crosscutting issues and (h) for the Methodology for Assessment. In Phase-IB evaluations of innovative nuclear energy technologies will be performed by Member States against the INPRO Basic Principles, User Requirements and Criteria. This paper summarizes the results achieved in the Phase 1A of INPRO and is a cooperative effort of the INPRO team, consisting of all INPRO cost free experts and task managers. (author)

  17. Cutting through the Hype: Evaluating the Innovative Potential of New Educational Technologies through Business Model Analysis

    Science.gov (United States)

    Kalman, Yoram M.

    2016-01-01

    In an era when novel educational technologies are constantly introduced to the marketplace, often accompanied by hyperbolic claims that these ground-breaking innovations will transform the educational landscape, decision makers in educational institutions need a methodological approach for examining the innovative potential of new educational…

  18. Measuring Consumer Innovativeness: Identifying Innovators among Consumers of Modern Technologies

    Directory of Open Access Journals (Sweden)

    Jana Filová

    2015-12-01

    Full Text Available The methods currently used in innovation marketing research are focused on the late phases of the innovation process and are usually methodologically complex. This limits their practical impact. The presented work aims to create a simple self-report scale applicable in the initial and late phases of the innovation process, highly modular and suitable for a wide range of research. The main battery of questions was inspired by the adopter categorization by Rogers. The questions determine both (1 general characteristics of innovation adopters and (2 their relationship to a specific innovation. The scale was tested during robust longitudinal online research, thematically focused on users of modern technologies. A representative sample of 4,000 Internet users in the Czech Republic took part in the survey from 2013 to 2015. The result is a new self-report scale measuring consumer innovativeness applicable for prototyping, strategic decisions and effective communication of innovations to consumers.

  19. Technological Innovation and Strategic Human Resource Management: Developing a Theory.

    Science.gov (United States)

    Gattiker, Urs E.

    Technological innovation affects the structure and content of jobs. Research indicates that there is a need for a theory of technological innovation and strategic human resource management considering several factors, such as an employee's beliefs about the effect of technological innovations on the quality of work life and work content.…

  20. Does Your Department Have a Technology Innovation Strategy?

    Science.gov (United States)

    Felkey, Bill G; Fox, Brent I

    2016-11-01

    There are ways to facilitate the successful implementation of technological innovations. These are especially important in a time of rapid development of new tools to support safe and effective medication therapy. This installment addresses some of the key components of a successful technology innovation strategy.

  1. Engineering innovation in healthcare: technology, ethics and persons.

    Science.gov (United States)

    Bowen, W Richard

    2011-01-01

    Engineering makes profound contributions to our health. Many of these contributions benefit whole populations, such as clean water and sewage treatment, buildings, dependable sources of energy, efficient harvesting and storage of food, and pharmaceutical manufacture. Thus, ethical assessment of these and other engineering activities has often emphasized benefits to communities. This is in contrast to medical ethics, which has tended to emphasize the individual patient affected by a doctor's actions. However technological innovation is leading to an entanglement of the activities, and hence ethical responsibilities, of healthcare professionals and engineering professionals. The article outlines three categories of innovation: assistive technologies, telehealthcare and quasi-autonomous systems. Approaches to engineering ethics are described and applied to these innovations. Such innovations raise a number of ethical opportunities and challenges, especially as the complexity of the technology increases. In particular the design and operation of the technologies require engineers to seek closer involvement with the persons benefiting from their work. Future innovation will require engineers to have a good knowledge of human biology and psychology. More particularly, healthcare engineers will need to prioritize each person's wellbeing, agency, human relationships and ecological self rather than technology, in the same way that doctors prioritize the treatment of persons rather than their diseases.

  2. Science, Technology, and Innovation Policy

    DEFF Research Database (Denmark)

    Lundvall, Bengt-Åke; Borrás, Susana

    2005-01-01

    This chapter is about what governments have done and could do to promote the production, diffusion, and use of scientific and technical knowledge in order to realize national objectives. We begin the chapter with "story-telling" based on sketchy historical facts. The aim of  the two stories...... is to illustrate that innovation policy covers a wide set of issues that have been on the agenda far back in history while still remaining important today. We move on to sketch the history of innovation policy, splitting it up into the three ideal types: science, technology, and innovation policy. We use OECD...

  3. Comparing the innovation effects of support schemes for renewable electricity technologies: A function of innovation approach

    International Nuclear Information System (INIS)

    Río, Pablo del; Bleda, Mercedes

    2012-01-01

    The aim of this paper is to provide a comparative assessment of the innovation effects of instruments which support the diffusion of renewable electricity technologies with a functions-oriented technological innovation system perspective. The paper provides a link between two major streams of the literature: the functions of innovation systems and the literature on renewable electricity support schemes. We show that, when a functional perspective is adopted, feed-in tariffs are likely to be superior to other policy instruments (quotas with tradable green certificates and tendering), although they still need to be complemented with other instruments, most importantly, direct R and D support. Furthermore, those innovation effects are affected by the specific design elements of the instruments chosen. - Highlights: ► A comparison of the innovation effects of instruments for the diffusion of renewable technologies. ► A functions-oriented technological innovation system perspective. ► A link between the functions of innovation systems and the literature on renewable electricity support schemes. ► Feed-in tariffs are likely to be superior to other instruments. ► Innovation effects are affected by the specific design elements of instruments.

  4. Technology for Innovation in Radiation Oncology.

    Science.gov (United States)

    Chetty, Indrin J; Martel, Mary K; Jaffray, David A; Benedict, Stanley H; Hahn, Stephen M; Berbeco, Ross; Deye, James; Jeraj, Robert; Kavanagh, Brian; Krishnan, Sunil; Lee, Nancy; Low, Daniel A; Mankoff, David; Marks, Lawrence B; Ollendorf, Daniel; Paganetti, Harald; Ross, Brian; Siochi, Ramon Alfredo C; Timmerman, Robert D; Wong, John W

    2015-11-01

    Radiation therapy is an effective, personalized cancer treatment that has benefited from technological advances associated with the growing ability to identify and target tumors with accuracy and precision. Given that these advances have played a central role in the success of radiation therapy as a major component of comprehensive cancer care, the American Society for Radiation Oncology (ASTRO), the American Association of Physicists in Medicine (AAPM), and the National Cancer Institute (NCI) sponsored a workshop entitled "Technology for Innovation in Radiation Oncology," which took place at the National Institutes of Health (NIH) in Bethesda, Maryland, on June 13 and 14, 2013. The purpose of this workshop was to discuss emerging technology for the field and to recognize areas for greater research investment. Expert clinicians and scientists discussed innovative technology in radiation oncology, in particular as to how these technologies are being developed and translated to clinical practice in the face of current and future challenges and opportunities. Technologies encompassed topics in functional imaging, treatment devices, nanotechnology, and information technology. The technical, quality, and safety performance of these technologies were also considered. A major theme of the workshop was the growing importance of innovation in the domain of process automation and oncology informatics. The technologically advanced nature of radiation therapy treatments predisposes radiation oncology research teams to take on informatics research initiatives. In addition, the discussion on technology development was balanced with a parallel conversation regarding the need for evidence of efficacy and effectiveness. The linkage between the need for evidence and the efforts in informatics research was clearly identified as synergistic. Copyright © 2015 Elsevier Inc. All rights reserved.

  5. Open Innovation and Technology Maturity Analysis

    Science.gov (United States)

    2007-09-11

    INFOLOGIC Inc. All rights reserved. Innovation Management Model  Product: Technology-heavy (e.g: Airplane, iPod) OR Service-heavy (e.g: Starbucks ...System, eBay)  Process: Any critical business process to ensure the success of product (e.g: iTune for iPod, Marketing and Supply Chain Management...Integration and Voice of the Customer Voice of the Customer Integration M A T U R I T Y VALUE Radical Innovation Evolutionary Innovation INCREMENTAL

  6. Innovation Environment in Small Technology-Based Companies

    OpenAIRE

    Gonçalves Silveira Fiates, Gabriela; Azevedo Fiates, José Eduardo; Ribeiro Serra, Fernando A; Portugal Ferreira, Manuel

    2010-01-01

    Innovation has been identified as a strategy to achieve competitive advantage, particularly in contexts of change and especially for technology-based companies – TBCs. Although the adoption of innovation strategies is not easy, small companies have an organizational environment more conducive to innovation. This article examines how managers and employees of small TBCs perceive aspects of the internal environment of innovation in the organization (culture, organizational structure, personnel ...

  7. The Opportunities and Challenges of Persuasive Technology in Creating Sustainable Innovation and Business Model Innovation

    DEFF Research Database (Denmark)

    Aagaard, Annabeth; Lindgren, Peter

    2015-01-01

    The opportunities of persuasive technology in facilitating sustainable innovation and business model innovation have been witnessed continuously during the last decade. The unique ability of persuasive technology in interacting and mediating across users, customers, decisions makers and other...... stakeholders provides access to core knowledge about behavior and opportunities to influence and even change their behavior in a positive and more sustainable manner. Sustainable innovation and business model innovation is gaining more and more competitive leverage due to customer requirements, the growing...

  8. [Medical doctors driving technological innovation: questions about and innovation management approaches to incentive structures for lead users].

    Science.gov (United States)

    Bohnet-Joschko, Sabine; Kientzler, Fionn

    2010-01-01

    Management science defines user-generated innovations as open innovation and lead user innovation. The medical technology industry finds user-generated innovations profitable and even indispensable. Innovative medical doctors as lead users need medical technology innovations in order to improve patient care. Their motivation to innovate is mostly intrinsic. But innovations may also involve extrinsic motivators such as gain in reputation or monetary incentives. Medical doctors' innovative activities often take place in hospitals and are thus embedded into the hospital's organisational setting. Hospitals find it difficult to gain short-term profits from in-house generated innovations and sometimes hesitate to support them. Strategic investment in medical doctors' innovative activities may be profitable for hospitals in the long run if innovations provide first-mover competitive advantages. Industry co-operations with innovative medical doctors offer chances but also bear potential risks. Innovative ideas generated by expert users may result in even higher complexity of medical devices; this could cause mistakes when applied by less specialised users and thus affect patient safety. Innovations that yield benefits for patients, medical doctors, hospitals and the medical technology industry can be advanced by offering adequate support for knowledge transfer and co-operation models.

  9. Work and technological innovation in organic agriculture.

    Science.gov (United States)

    Tereso, M J A; Abrahão, R F; Gemma, S F B; Montedo, U B; Menegon, N L; Guarneti, J E; Ribeiro, I A V

    2012-01-01

    Organic agriculture is a sustainable cultivation ecologically, economically and socially. Several researches in organic agriculture have been made from technical perspectives, economic traits or related to ecological aspects. There are practically no investigations into the nature of the technology used in organic agriculture, especially from an ergonomic perspective. From the activity analysis, this study aimed to map the technology used in the production of organic vegetables. Properties producing organic vegetables were selected representing the State of São Paulo. It was applied an instrument (questionnaire and semi-structured interview) with their managers and it was made visual records to identify adaptations, innovations and technological demands that simultaneously minimize the workload and the difficulties in performing the tasks and increase work productivity. For some of the technological innovations a digital scanner was used to generate a virtual solid model to facilitate its redesign and virtual prototyping. The main results show that organic farmers have little technology in product form. The main innovations that enable competitive advantage or allow higher labor productivity occur in the form of processes, organization and marketing.

  10. The role of innovative remediation technologies

    International Nuclear Information System (INIS)

    Doesburg, J.M.

    1992-05-01

    There are currently over 1200 sites on the US Superfund's National Priorities List (NPL) of hazardous waste sites, and there are over 30, 000 sites listed by the Comprehensive Environmental Responsibility, Compensation and Liability Information System (CERCLIS). The traditional approach to remediating sites in the US has been to remove the material and place it in a secure landfill, or in the case of groundwater, pump and treat the effluent. These technologies have proven to be very expensive and don't really fix the problem. The waste is just moved from one place to another. In recent years, however, alternative and innovative technologies have been increasingly used in the US to replace the traditional approaches. This paper will focus on just such innovative remediation technologies in the US, looking at the regulatory drivers, the emerging technologies, some of the problems in deploying technologies, and a case study

  11. Social acceptance of renewable energy innovations: The role of technology cooperation in urban Mexico

    International Nuclear Information System (INIS)

    Mallett, Alexandra

    2007-01-01

    Much discussion of technology transfer and the adoption of renewable energy innovations overlooks the importance of social acceptance. Using mainly qualitative analytical techniques, empirical evidence was obtained from the experiences of those involved in solar water heaters in Mexico City (e.g. technicians, industry representatives, local government officials, community representatives/end users) in order to explain social acceptance of these renewable energy innovations. In particular, this paper evaluates Rogers' [2005. Diffusion of Innovations. Free Press, New York.] technology adoption model (using an 'active' definition of social acceptance), which claims that adoption comes about through a decision-making process occurring in stages-knowledge, persuasion, implementation and confirmation and can be traced to a number of factors such as relative advantage, complexity, and triability. This paper argues that while Rogers' technology adoption model is a useful tool to explain social acceptance, this approach needs to be revised to adequately reflect the effects of technology cooperation, an integral part of technology adoption. Furthermore, this paper asserts that those forms of technology cooperation in which active participants are from various sectors and interact continuously throughout the process is most effective in eliciting social acceptance of renewable energy innovations

  12. User driven innovation in mobile technologies?

    DEFF Research Database (Denmark)

    Larsen, Casper Schultz; Koch, Christian

    2007-01-01

    by systems already in function. Stories of prior business successes can be an important tool to ensure further innovative investments since lack of enterprise strategies is often an obstacle for innovation, especially user driven. Both small and large software houses develops dedicated software for coupling...... technology systems relying on the concept of affordance. This paper examines how innovation processes mediate between user orientations and technology offers. There is a great potential for mobile handheld ICT-systems to support numerous work processes in the AEC-industry and this can be substantiated...... site practises, and headquarters - inspired by specific user needs for optimizing work processes. The most important mechanisms evoked for creating the mediating found in the paper are ‘hybrids’ where professionals from AEC establishes a software house, developing ICT-products for specific on...

  13. Managing Innovation and Change for Instructional Technology.

    Science.gov (United States)

    Holznagel, Donald C.

    1991-01-01

    Introduces the term "orgware" and reviews the literature on managing technological innovation in instructional settings. Six areas of management concern are described, and advice on managing innovation and change is provided. (11 references) (GLR)

  14. The differentiated impacts of organizational innovation practices on technological innovation persistence

    OpenAIRE

    Le Bas , Christian; Mothe , Caroline; Nguyen-Thi , Thuc Uyen

    2015-01-01

    International audience; Purpose – The purpose of this paper is to test the major determinants of technological (product and process) innovation persistence and provides evidence of the significant role of organizational innovation. Design/methodology/approach – Data came from two waves of the Luxembourg Community Innovation Survey (CIS): CIS2006 for 2004-2006 and CIS2008 for 2006-2008. The longitudinal data set resulted in a final sample of 287 firms. A multinomial probit model estimates the ...

  15. Introduction to Innovative Food Processing and Technology

    OpenAIRE

    Tokusoglu, Ozlem

    2015-01-01

    Consumers, the food industry and the regulatory agencies demand the innovative technologies to provide safe and stable foods. Nonthermal processing technologies offer unprecedented opportunities and challenges for the food industry to market safe, high quality health-promoting foods. Those innovative food processing is often perceived as an alternative to thermal food processing, yet there are many nonthermal preparatory unit operations as well as food processing and preservation opportunitie...

  16. Innovation Implementation: The Role of Technology Diffusion Agencies

    Directory of Open Access Journals (Sweden)

    Jasmin Robertson

    2008-08-01

    Full Text Available A great deal of ‘innovation failure’ can be attributed to ineffective implementation, rather than failure of the innovation itself. External agencies such as technology diffusion agencies (TDAs have been created to assist organisations to implement innovation successfully, but there has been little empirical research investigating their roles. This paper presents a longitudinal case study of failed innovation implementation, and highlights in particular the role that technology diffusion agencies can play to prevent such failure in future cases. Results indicate the importance of changes in organisational factors such as training, climate, and management support during the implementation process in predicting outcomes, and imply a role for TDAs in assisting with both technical and non-technical aspects of innovation implementation.

  17. The role of technological innovation in creating radically new product meanings

    DEFF Research Database (Denmark)

    Krabbe, Anders Dahl

    2015-01-01

    This paper explores the concept of technological epiphanies from the literature on design driven innovation. A technological epiphany is defined as a product innovation that can be considered radical, both in terms of technology as well as the meaning and experiences it creates through its design....... Three cases of technological epiphanies from the hearing aid industry are analyzed and discussed in terms of how they represent a radical innovation in technology as well as in product meaning and which role the technological aspect has played in the radical innovation of the meaning of the product....... Three different ways in which technology can function as an enabler for the innovation of product meanings are explored and a fourth is found is found during the analysis. The paper concludes by suggesting directions for future research....

  18. INNOVATIVE TECHNOLOGY VERIFICATION REPORT " ...

    Science.gov (United States)

    The RemediAidTm Total Petroleum Hydrocarbon Starter Kit (RemediAidTm kit) developed by CHEMetries, Inc. (CHEMetrics), and AZUR Environmental Ltd was demonstrated under the U.S. Environmental Protection Agency Superfund Innovative Technology Evaluation Program in June 2000 at the Navy Base Ventura County site in Port Hueneme, California. The purpose of the demonstration was to collect reliable performance and cost data for the RemediAid Tm kit and six other field measurement devices for total petroleum hydrocarbons (TPH) in soil. In addition to assessing ease of device operation, the key objectives of the demonstration included determining the (1) method detection limit, (2) accuracy and precision, (3) effects of interferents and soil moisture content on TPH measurement, (4) sample throughput, and (5) TPH measurement costs for each device. The demonstration involved analysis of both performance evaluation samples and environmental samples collected in five areas contaminated with gasoline, diesel, lubricating oil, or other petroleum products. The performance and cost results for a given field measurement device were compared to those for an off-site laboratory reference method,

  19. Software engineering technology innovation: Turning research results into industrial success

    NARCIS (Netherlands)

    Punter, H.T.; Krikhaar, R.L.; Bril, R.J.

    2009-01-01

    This paper deals with the innovation of software engineering technologies. These technologies are methods and tools for conducting software development and maintenance. We consider innovation as a process consisting of two phases, being technology creation and technology transfer. In this paper, we

  20. Software engineering technology innovation - Turning research results into industrial success

    NARCIS (Netherlands)

    Punter, T.; Krikhaar, R.L.; Bril, R.J.

    2009-01-01

    This paper deals with the innovation of software engineering technologies. These technologies are methods and tools for conducting software development and maintenance. We consider innovation as a process consisting of two phases, being technology creation and technology transfer. In this paper, we

  1. 2006 Campus Technology Innovators

    Science.gov (United States)

    Campus Technology, 2006

    2006-01-01

    This article features the winners of this year's "Campus Technology Innovator" competition. The winners are: (1) Drexel University, Pennsylvania (outsourcing); (2) Darton College, Georgia (3D); (3) Minnesota State Colleges and Universities (ePortfolios); (4) University of Michigan (the Web); (5) University of Tennessee College of…

  2. Indigenous Technological Innovation : Capability and ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Indigenous Technological Innovation : Capability and Competitiveness in China's ... IDRC and key partners will showcase critical work on adaptation and ... Call for new OWSD Fellowships for Early Career Women Scientists now open.

  3. Innovations in and by nuclear technology - review and perspectives

    International Nuclear Information System (INIS)

    Barthelt, K.

    1984-01-01

    An innovative technology like nuclear technology does not make progress by itself once it has to prove its profitability. It was a long way from technical to economic perfection which took courageous managemental descisions. Since nuclear fission was discovered, its exploitation as an energy source has been perfected. Now it is not only technically safe, reliable and ecological; it has also proved to be economically efficient as compared with the competing primary energies. As with other great innovations, the innovative force of nuclear technology is characterized by two directions: its assimilating capacity and its expanding capacity. Further issues are the so-called technological spin-off of nuclear technology and the fresh impetus nuclear technology gives to other fields. Another aspect beyond technological spin-off affecting all of our society: It was the first large technology requiring risk analyses to be carried out. Discussion broke out in public on the question: ''How safe is nuclear technology''. To sum up, the basic innovation of nuclear technology is now an important economic factor. It came just in time. It is capable of providing relief to the world's energy problems. It is up to us to use it in an intelligent way in the future despite any short-breathed complaints. (orig./HSCH) [de

  4. Socio-economic research for innovative energy technologies

    Energy Technology Data Exchange (ETDEWEB)

    Ogawa, Yuichi [Tokyo Univ., High Temperature Plasma Center, Kashiwa, Chiba (Japan); Okano, Kunihiko [Central Research Inst. of Electric Power Industry, Tokyo (Japan)

    2006-10-15

    In the 21st century global environment and energy issues become very important, and this is characterized by the long-term (in the scale of a few tens years) and world-wide issue. In addition, future prospect of these issues might be quite uncertain, and scientific prediction could be very difficult. For these issues vigorous researches and various efforts have been carried out from various aspects; e.g., world-wide discussion such as COP3 in Kyoto, promotion of the energy-saving technology and so on. Development of environment-friendly energy has been promoted, and new innovative technologies are explored. Nuclear fusion is, of course, a promising candidate. While, there might be some criticism for nuclear fusion from the socio-economic aspect; e.g., it would take long time and huge cost for the fusion reactor development. In addition, other innovative energy technologies might have their own criticism, as well. Therefore, socio-economic research might be indispensable for future energy resources. At first we have selected six items as for the characteristics, which might be important for future energy resources; i.e., energy resource, environmental load, economics, reliability/stability, flexibility on operation and safety/security. Concerning to innovative energy technologies, we have nominated seven candidates; i.e., advanced coal technology with CO2 recovery system, SOFC top combined cycle, solar power, wind power, space solar power station, advanced fission and fusion. Based on questionnaires for ordinary people and fusion scientists, we have tried to assess the fusion energy development, comparing with other innovative energy technologies. (author)

  5. Energy, environment and technological innovation

    Directory of Open Access Journals (Sweden)

    Fernando José Pereira da Costa

    2015-08-01

    Full Text Available The development problems can not be addressed without taking account of the environmental and energy issues, as well as the intimate relationship and the intense interaction between the two. In fact, the energy issue can not be analyzed separately from environmental issues, nor the advances in technological innovation, integrating dynamic-systemic way and so positioning address the issue of the development model to set the bulge the transition process experienced by the world since the seventies of the twentieth century. This transition, in turn, implies the passage of Paradigm of Fossil Fuels to Renewable Energy also called the Paradigm of renewable sources of energy, not just holding the energy problem, but towards to environmental and technological components. It is within this relatively slow and long process, instigator of high levels of volatility, turbulence inducing and motor of technological innovation, which is (re raises the question of the development model that defines how a new model/style development.

  6. The Impact of Financial Support System on Technology Innovation: A Case of Technology Guarantee System in Korea

    Directory of Open Access Journals (Sweden)

    Woo-Seok Jang

    2008-04-01

    Full Text Available We analyzed the impact of financial support system on technological innovation of small and medium manufacturing firms in Korea, with a special interest in technology guarantee system. This was done using a sample of 1,014 Korean manufacturing firms of which 43% were venture companies. Our study provides two important conclusions. First, the result of empirical analysis indicates that financial support systems have a significant influence on both product innovation and process innovation of SMEs in Korea. Second, a more important conclusion of this research is that technology guarantee system impacts on product innovation; however not on process innovation. This result implies that technology guarantee system attaches more importance to technological innovations related with product development than to those related with process enhancement.

  7. Which One Triggers the Other? Technological or Social Innovation

    Science.gov (United States)

    Bulut, Cagri; Eren, Hakan; Halac, Duygu Seckin

    2013-01-01

    The term "innovation" has sometimes been used as a synonym for technological innovation until the concept of "social innovation" attracted academic attention. Since then, these two types of innovation have been investigated individually. It can be claimed that, despite the great importance of social innovation studies,…

  8. Innovative waste treatment and conditioning technologies at nuclear power plants

    International Nuclear Information System (INIS)

    2006-05-01

    The objective of this publication is to provide Member States with information on the most innovative technologies and strategies used in waste treatment and conditioning. At present, some of those technologies and strategies might not be widely implemented at nuclear power plants (NPP), but they have an important potential for their use as part of the long range NPP, utility, or national strategy. Thus, the target audience is those decision makers at the national and organizational level responsible for selecting waste processing technologies and strategies over a period of three to ten years. Countries and individual nuclear plants have limited financial resources which can be applied toward radioactive waste processing (treatment and conditioning). They are challenged to determine which of the many available technologies and strategies are best suited to meet national or local needs. This publication reduces the selection of processes for wastes generated by nuclear power plants to those technologies and strategies which are considered innovative. The report further identifies the key benefits which may derive from the adoption of those technologies, the different waste streams to which each technology is relevant, and the limitations of the technologies. The technologies and strategies identified have been evaluated to differentiate between (1) predominant technologies (those that are widely practiced in multiple countries or a large number of nuclear plants), and (2) innovative technologies (those which are not so widely used but are considered to offer benefits which make them suitable for broader application across the industry). Those which fall into the second category are the primary focus of this report. Many IAEA publications address the technical aspects of treatment and conditioning for radioactive wastes, covering research, technological advances, and safety issues. These studies and reports primarily target the research and technical staff of a

  9. Technology Foresight on Emerging Technologies: Implications for a National Innovation Initiative in Brazil

    Directory of Open Access Journals (Sweden)

    Maria Fatima Ludovico de Almeida

    2015-07-01

    Full Text Available Prospective studies about emerging technologies and their implications for public policy formulation indicate critical choices ranging from global to national level, even to the individual firm or institution. Emerging technologies have been shaping the future of some industries and transforming many others. In many cases, these technologies will determine the restructuring of industries as never before. Specially designed for enabling better planning and future decisions, technology foresight (TF methods are used to foresee diffusion of innovations, mapping out commercially viable roadmaps for technological development. This paper is concerned with a methodological instrument adopted in Brazil as support for building the Agenda for a National Innovation Initiative (NII, which was articulated by government, universities, R&D institutions, and private firms. It presents and discusses an integrated methodological approach for a TF study, specially designed for the purpose of this Brazilian innovation policy instrument, concerning three emerging technologies – nanotechnology, biotechnology, and information and communication technologies (ICT.

  10. FY10 Engineering Innovations, Research and Technology Report

    Energy Technology Data Exchange (ETDEWEB)

    Lane, M A; Aceves, S M; Paulson, C N; Candy, J V; Bennett, C V; Carlisle, K; Chen, D C; White, D A; Bernier, J V; Puso, M A; Weisgraber, T H; Corey, B; Lin, J I; Wheeler, E K; Conway, A M; Kuntz, J D; Spadaccini, C M; Dehlinger, D A; Kotovsky, J; Nikolic, R; Mariella, R P; Foudray, A K; Tang, V; Guidry, B L; Ng, B M; Lemmond, T D; Chen, B Y; Meyers, C A; Houck, T L

    2011-01-11

    This report summarizes key research, development, and technology advancements in Lawrence Livermore National Laboratory's Engineering Directorate for FY2010. These efforts exemplify Engineering's nearly 60-year history of developing and applying the technology innovations needed for the Laboratory's national security missions, and embody Engineering's mission to ''Enable program success today and ensure the Laboratory's vitality tomorrow.'' Leading off the report is a section featuring compelling engineering innovations. These innovations range from advanced hydrogen storage that enables clean vehicles, to new nuclear material detection technologies, to a landmine detection system using ultra-wideband ground-penetrating radar. Many have been recognized with R&D Magazine's prestigious R&D 100 Award; all are examples of the forward-looking application of innovative engineering to pressing national problems and challenging customer requirements. Engineering's capability development strategy includes both fundamental research and technology development. Engineering research creates the competencies of the future where discovery-class groundwork is required. Our technology development (or reduction to practice) efforts enable many of the research breakthroughs across the Laboratory to translate from the world of basic research to the national security missions of the Laboratory. This portfolio approach produces new and advanced technological capabilities, and is a unique component of the value proposition of the Lawrence Livermore Laboratory. The balance of the report highlights this work in research and technology, organized into thematic technical areas: Computational Engineering; Micro/Nano-Devices and Structures; Measurement Technologies; Engineering Systems for Knowledge Discovery; and Energy Manipulation. Our investments in these areas serve not only known programmatic requirements of today and tomorrow, but

  11. Minimizing the cost of subsea developments through technological innovation

    International Nuclear Information System (INIS)

    Eyre, G.; Loth, B.

    1994-01-01

    The paper summarizes the results of an extensive study carried out for the UK Government. This assessed the cost and economic impact of technological innovation on subsea and floating developments in the UKCS. The study covered, innovations that could be applied to subsea developments to significantly reduce cost, including multiwell completions, composite pipelines, compartmented pipelines, pipeline specification breaking and autonomous control systems. Cost and economic models were used to assess the economic impact of technological innovation on marginal field developments. The results of these assessments were drawn up as a series of ranking lists designed to assist manufacturers and suppliers in establishing priorities for research and development funding. The study also explored the potential UKCS and World market for innovative subsea technologies and quantified the research and development required to bring key innovations into commercial use

  12. Quantitative Analysis of Technological Innovation in Urology.

    Science.gov (United States)

    Bhatt, Nikita R; Davis, Niall F; Dalton, David M; McDermott, Ted; Flynn, Robert J; Thomas, Arun Z; Manecksha, Rustom P

    2018-01-01

    To assess major areas of technological innovation in urology in the last 20 years using patent and publication data. Patent and MEDLINE databases were searched between 1980 and 2012 electronically using the terms urology OR urological OR urologist AND "surgeon" OR "surgical" OR "surgery". The patent codes obtained were grouped in technology clusters, further analyzed with individual searches, and growth curves were plotted. Growth rates and patterns were analyzed, and patents were correlated with publications as a measure of scientific support and of clinical adoption. The initial search revealed 417 patents and 20,314 publications. The top 5 technology clusters in descending order were surgical instruments including urinary catheters, minimally invasive surgery (MIS), lasers, robotic surgery, and image guidance. MIS and robotic surgery were the most emergent clusters in the last 5 years. Publication and patent growth rates were closely correlated (Pearson coefficient 0.78, P innovation and adoption into clinical practice. Patent metrics identify emergent technological innovations and such trends are valuable to understand progress in the field of urology. New surgical technologies like robotic surgery and MIS showed exponential growth in the last decade with good scientific vigilance. Copyright © 2017 Elsevier Inc. All rights reserved.

  13. School-based data and management of technological innovations in ...

    African Journals Online (AJOL)

    School-based data and management of technological innovations in public secondary schools in Cross River State. ... Global Journal of Educational Research ... Result indicated that: there is no significant positive relationship between school-based data and principals management of technological innovation.

  14. Developing technology intelligence strategy to access knowledge of innovation clusters.

    OpenAIRE

    Rani Jeanne Dang; Letizia Mortara; Ruth Thomson; Tim Minshall

    2010-01-01

    Current times are characterised by a knowledge-based economy and fast technological change. In this difficult environment, companies compete to maintain a relevant position through innovation. In response to these challenges, many companies are currently adopting an open approach to innovation, pursuing innovation by combining internal and external resources. Technology intelligence (TI) activities support the implementation of open innovation with the systematic capture and delivery of infor...

  15. Selection of innovative technologies for the remediation of soils contaminated with radioactive and mixed wastes

    International Nuclear Information System (INIS)

    Steude, J.; Tucker, B.

    1991-01-01

    The remediation of sites containing radioactive and mixed wastes is in a period of rapid growth. The state of the art of remediation is progressing to handle the shortcomings of conventional pump and treat or disposal technologies. The objective of this paper is to review the status of selected innovative technologies which treat soils contaminated with radioactive and mixed waste. Technologies are generally classified as innovative if they are fully developed, but lack sufficient cost or performance data for comparison with conventional technologies. The Environmental Protection Agency recommends inclusion of innovative technologies in the RI/FS screening process if there is reason to believe that they would offer advantages in performance, implementability, cost, etc. This paper serves as a compilation of the pertinent information necessary to gain an overview of the selected innovative technologies to aid in the RI/F'S screening process. The innovative technologies selected for evaluation are listed below. Bioremediation, although innovative, was not included due to the combination of the vast amount of literature on this subject and the limited scope of this project. 1. Soil washing and flushing; 2. Low temperature thermal treatment; 3. Electrokinetics; 4. Infrared incineration; 5. Ultrasound; 6. In situ vitrification; 7. Soil vapor extraction; 8. Plasma torch slagging; 9. In situ hot air/steam extraction; 10. Cyclone reactor treatment; 11. In situ radio frequency; 12. Vegetative radionuclide uptake; and 13. In situ soil heating. The information provided on each technology includes a technical description, status, summary of results including types of contaminants and soils treated, technical effectiveness, feasibility and estimated cost

  16. Four Essays on Technology Licensing and Firm Innovation

    DEFF Research Database (Denmark)

    Moreira, Solon

    &D strategies. On the supply side, the existing literature has been focused on understanding how technology licensing can be used by firms as a mechanism to recover investments in innovative activities and to foster learning opportunities. On the demand side, it has been shown that licensing is an important...... source that firms can tap into to feed their internal needs for innovative knowledge. While several studies have examined technology licensing through the lens of the licensor, research on how firms rely on licensing contracts to acquire knowledge and improve their innovation performance still leaves......Licensing contracts represent one of the most widely used mechanisms to exchange technologies and transfer know-how between firms. Due to the opportunities that licensing creates for firms operating on both sides of the markets for technology, it has increasingly become an integral part of firms’ R...

  17. Innovative technologies in business hotels

    Directory of Open Access Journals (Sweden)

    Анастасия Игоревна Сидоренко

    2015-10-01

    Full Text Available The article analyzes the state and prospects of development of the hotel industry sector in Ukraine, aimed at a business audience that is constantly increasing; the need for the development and implementation of innovative technologies in a business hotel, because in the long term they will provide improving the service levels, the occupancy rate of the hotel rooms and competitiveness. An expediency of introducing innovative wireless LED lighting system in the rooms of business hotels is proved

  18. Technological Innovation and Cooperation for Foreign Information Access Program

    Science.gov (United States)

    Office of Postsecondary Education, US Department of Education, 2012

    2012-01-01

    The Technological Innovation and Cooperation for Foreign Information Access (TICFIA) Program supports projects focused on developing innovative technologies for accessing, collecting, organizing, preserving, and disseminating information from foreign sources to address the U.S.' teaching and research needs in international education and foreign…

  19. Smart space technology innovations

    CERN Document Server

    Chen, Mu-Yen

    2013-01-01

    Recently, ad hoc and wireless communication technologies have made available the device, service and information rich environment for users. Smart Space and ubiquitous computing extend the ""Living Lab"" vision of everyday objects and provide context-awareness services to users in smart living environments. This ebook investigates smart space technology and its innovations around the Living Labs. The final goal is to build context-awareness smart space and location-based service applications that integrate information from independent systems which autonomously and securely support human activ

  20. Environment and innovation. An evaluation of EU strategies and policies; Umwelt und Innovation. Eine Evaluation von EU-Strategien und Politiken

    Energy Technology Data Exchange (ETDEWEB)

    Hertin, Julia; Jacob, Klaus; Kahlenborn, Walter

    2008-03-15

    This study outlines the methodology and results of the research project: ''Umwelt, Innovation und Beschaeftigung in einem europaeischen Kontext: Europaeische Strategien als ein Motor fuer oekeffiziente Technologien und Wettbewerbsfaehigkeit'', funded by the BMU and UBA and carried out jointly by the Forschungsstelle fuer Umweltpolitik of Freie Universitaet Berlin and Adelphi Consult. The project was carried out with the intention to evaluate inhowfar current EU policies follow and implement goals that can be classified as ''ecological industrial policy''. In the definition of the BMU, this concept means a political strategy which enhances eco-efficient innovations beyond the traditional approaches of environmental and R + D policy. A strategy of this type is to influence the innovation behaviour and also influence the marketing conditions for generic technologies. As the strategy intends to effect both a reduction of the ecological burden and an enhancement of the economic and competitive standing, it can recur to a two-fold foundation. The current investigation attempted to identify political measures at EU level that are suited for enhancing fast development and propagation of eco-efficient technologies. (orig.)

  1. The Method of Relative Evaluations in the Analysis of the Innovation and Scientific-Technical Activity in the National Innovation System

    Directory of Open Access Journals (Sweden)

    Melnyk Alexander G.

    2017-04-01

    Full Text Available The article suggests the methodical approach to calculation of the system of analytical indicators for complex analysis of the innovation and scientific-technical activity by defining indexes such as: implementarity of technologies; institutional fullness of the national innovation system (NIS; high technology grade of the industry branches and sectors of the NIS. Fundamentals on the interpretation of these indicators in determining the status of institutional and technological structures, as well as the investment ability of technologies in the NIS, have been formulated. An evaluation of status of the innovation and scientific-technical activity in the industry and in the sector of scientific organizations of Ukraine was carried out on the example of practical application of the methodical approach to the analysis of statistical data. A simulation of the calculation index of implementarity of technologies in terms of the hypothesis of a 10 x magnification of the number of patents for inventions was completed. The author’s own interpretation of values of the calculated indicators has been proposed.

  2. Cooperative technological innovation and competitiveness in the nuclear arena

    International Nuclear Information System (INIS)

    Castro Galvan, A.; Marco Pelegrin, M.; Salve Galiana, R.; Vallejo Haya, J.; Tagle Gonzalez, J. A.

    2000-01-01

    R and D and, more recently, technological innovation and its relationship with competitivity are more and more part of conferences, books, articles and political speeches and very often are the central part of them. Innovation has become fashionable and many initiatives have come out in connection with it. However, the relationship between technological innovation and competitivity are not always obvious. The current article intends to illustrate some mechanisms that link these two concepts through a specific case, DTN, that is already providing results for the Spanish nuclear industry and whose example can be extrapolated to other industrial sectors. The importance given by the nuclear to the innovation, the research and the technological development it is not new either exclusively belong to any specific organisation but makes evident the coherence between its traditional approach and the current idea of modernizing the country promoting the national technological capacity. (Author)

  3. Innovation in concentrating solar power technologies: A study drawing on patent data

    OpenAIRE

    Braun, Frauke G.; Hooper, Elizabeth; Wand, Robert; Zloczysti, Petra

    2010-01-01

    Better understanding the innovative process of renewable energy technologies is important for tackling climate change. Though concentrating solar power is receiving growing interest, innovation studies so far have explored innovative activity in solar technologies in general, ignoring the major differences between solar photovoltaic and solar thermal technologies. This study relies on patent data to examine international innovative activity in concentrating solar power technologies. Our uniqu...

  4. Fashion retail innovation: about context, antecedents and outcome in technological change projects

    DEFF Research Database (Denmark)

    Tambo, Torben

    2015-01-01

    Fashion retail is recognised for its strong capabilities in product innovation, while also having the potential to improve the governance of technology-based process innovation. This chapter proposes a model perspective in management of technology and innovation, including special requirements...... of fashion retailing. In particular, this chapter discusses the context of fashion retailing understood as product and brand-based characteristics. A case study-based methodology is then used to guide an analysis of antecedents and (expected) outcome of fashion retail innovation. IT-based innovation...... dominates, but innovation is suggested to include a broader scope of technologies. Contrary to innovation maturity models, this chapter proposes to consider innovation as a continuous refinement between dynamic capabilities and absorptive capacity where technologies must be adapted to the special...

  5. Innovation of Energy Technologies: the role of taxes

    OpenAIRE

    Copenhagen Economics

    2011-01-01

    The study deals with the links between energy taxation and innovation and presents also new empirical evidence on the impact of energy taxes on patenting activities related to energy technologies. The study suggests that while taxation is a very effective driver of innovation, it can be usefully complemented with other public policy tools, such as public research grants and other technology policies.

  6. Research on Upgrade Path to Technology Innovation of Resource-based SMEs in China

    Science.gov (United States)

    Jie, Xu

    2017-08-01

    Complexity, diversity and coordination are features of technology innovation of resource-based SMEs in China. This paper studies on the key factors of macro-environment, cooperation among enterprises and enterprise interior, which influence the upgrading of technology innovation of resource-based SMEs in China. This paper constructs integrated system of technology innovation to analyse the upgrade path to technology innovation of resource-based SMEs in China, so that enterprises would improve their technology innovation and get a new way to accomplish sustainable innovated development.

  7. Innovations in Balloon Catheter Technology in Rhinology.

    Science.gov (United States)

    D'Anza, Brian; Sindwani, Raj; Woodard, Troy D

    2017-06-01

    Since being introduced more than 10 years ago, balloon catheter technology (BCT) has undergone several generations of innovations. From construction to utilization, there has been a myriad of advancements in balloon technology. The ergonomics of the balloon dilation systems have improved with a focus on limiting the extra assembly. "Hybrid" BCT procedures have shown promise in mucosal preservation, including treating isolated complex frontal disease. Multiple randomized clinical trials report improved long-term outcomes in stand-alone BCT, including in-office use. The ever-expanding technological innovations ensure BCT will be a key component in the armamentarium of the modern sinus surgeon. Copyright © 2017 Elsevier Inc. All rights reserved.

  8. Climatic shocks associate with innovation in science and technology

    NARCIS (Netherlands)

    C.K.W. de Dreu (Carsten); Dijk, M.A. (Mathijs) van

    2018-01-01

    textabstractHuman history is shaped by landmark discoveries in science and technology. However, across both time and space the rate of innovation is erratic: Periods of relative inertia alternate with bursts of creative science and rapid cascades of technological innovations. While the origins of

  9. Innovative technologies for in-situ remediation

    International Nuclear Information System (INIS)

    Ragaini, R.; Aines, R.; Knapp, R.; Matthews, S.; Yow, J.

    1994-06-01

    LLNL is developing several innovative remediation technologies as long-term improvements to the current pump and treat approaches to cleaning up contaminated soils and groundwater. These technologies include dynamic underground stripping, in-situ microbial filters, and remediation using bremsstrahlung radiation. Concentrated underground organic contaminant plumes are one of the most prevalent groundwater contamination sources. The solvent or fuel can percolate deep into the earth, often into water-bearing regions. Collecting as a separate, liquid organic phase called dense non-aqueous-phase liquids (DNAPLs), or light NAPLs (LNAPLs), these contaminants provide a source term that continuously compromises surrounding groundwater. This type of spill is one of the most difficult environmental problems to remediate. Attempts to remove such material requires a huge amount of water which must be washed through the system to clean it, requiring decades. Traditional pump and treat approaches have not been successful. LLNL has developed several innovative technologies to clean up NAPL contamination. Detailed descriptions of these technologies are given

  10. Climatic shocks associate with innovation in science and technology.

    Science.gov (United States)

    De Dreu, Carsten K W; van Dijk, Mathijs A

    2018-01-01

    Human history is shaped by landmark discoveries in science and technology. However, across both time and space the rate of innovation is erratic: Periods of relative inertia alternate with bursts of creative science and rapid cascades of technological innovations. While the origins of the rise and fall in rates of discovery and innovation remain poorly understood, they may reflect adaptive responses to exogenously emerging threats and pressures. Here we examined this possibility by fitting annual rates of scientific discovery and technological innovation to climatic variability and its associated economic pressures and resource scarcity. In time-series data from Europe (1500-1900CE), we indeed found that rates of innovation are higher during prolonged periods of cold (versus warm) surface temperature and during the presence (versus absence) of volcanic dust veils. This negative temperature-innovation link was confirmed in annual time-series for France, Germany, and the United Kingdom (1901-1965CE). Combined, across almost 500 years and over 5,000 documented innovations and discoveries, a 0.5°C increase in temperature associates with a sizable 0.30-0.60 standard deviation decrease in innovation. Results were robust to controlling for fluctuations in population size. Furthermore, and consistent with economic theory and micro-level data on group innovation, path analyses revealed that the relation between harsher climatic conditions between 1500-1900CE and more innovation is mediated by climate-induced economic pressures and resource scarcity.

  11. Total football in innovation policy. Discussion paper on the evaluation of innovation policy; Totaalvoetbal in het innovatiebeleid. Discussiedocument evaluatie innovatiebeleid

    Energy Technology Data Exchange (ETDEWEB)

    Schoots, K.; Daniels, B.W.; Rivera Tinoco, R.A. [ECN Beleidsstudies, Petten (Netherlands)

    2010-10-15

    By distinguishing phases within a technology development trajectory, this report describes the factors for a well functioning innovation system and an evaluation framework for the effectiveness of innovation policy. The focus lies with energy technologies. The followed methodology connects mechanisms for creating the factors and boundary conditions for a sound innovation climate with the types of policy instruments that are required to reduce the uncertainties and barriers for actors in the different technology development phases. [Dutch] Dit rapport schetst aan de hand van de fasen binnen een technologieontwikkelingtraject en de factoren voor een goed functionerend innovatiesysteem een beoordelingskader voor de effectiviteit van innovatiebeleid, met een focus op energietechnieken. De gevolgde methodiek verbindt de mechanismen voor het creeren van de bouwstenen en randvoorwaarden voor een goed innovatieklimaat met de typen instrumenten die nodig zijn om de onzekerheden en barrieres voor de actoren in de verschillende technologieontwikkelingsfasen te verlagen.

  12. Accelerating nano-technological innovation in the Danish construction industry

    DEFF Research Database (Denmark)

    Koch, Christian; Stissing Jensen, Jens

    2007-01-01

    . The institutional features of the system are furthermore poorly equipped at identifying potentials within high-tech areas. In order to exploit the potentials of nano-technology it is thus argued that an alternative TIS needs to be established. Initiatives should identify and support "incubation rooms" or marked......  By viewing the construction industry as a technological innovation system (TIS) this paper discusses possible initiatives to accelerate nanotechnological innovations. The point of departure is a recent report on the application of nano-technology in the Danish construction industry, which...... concludes that opportunities are generally poorly appreciated by the industry and research communities alike. It is found that the construction industry is characterised by low-tech trajectories where dedicated innovation networks are often too fragile for innovations to stabilize and diffuse...

  13. Innovative activity of high-technology companies as assessment and forecasting object

    Directory of Open Access Journals (Sweden)

    A. E. Sklyarov

    2016-01-01

    Full Text Available Innovation activities, as well as innovations, are closely related meanings, and like many others economical definitions, have a broad range of meanings. Main characteristics and attributes of innovation involves new or significantly improved product, that’s being used, or in other words, found its application, and innovative activities – activities focused on realization of innovations. In this article, innovations are mainly considered in terms of high-technology production, evidence from Russian space industry. There are 5 basic stages of lifecycle of innovative project in considered industry: initiation, development, realization, expansion, consumption. Practically, third or fourth, or even both of these stages, often missing because there is no need of them. R&D activities, or even further serial production, based on previous developments, is an innovation activity, because these activities are stages of innovative projects lifecycle itself. Then it seems legit, to draw a conclusion, that in terms of high-technology production, company’s primary activity equals innovative activity. Basic characteristics of innovative activity of high-technology companies as assessment and forecasting object involves high level of uncertainty at every stage of projects lifecycle, high dependency on funding level of this activity, and high level and erratic structure of risk. All the above mentioned, means that assessment and forecasting of innovative activity of high-technology companies, needs development of its own methodological tools for each industry.

  14. Marginalization of end-use technologies in energy innovation for climate protection

    Science.gov (United States)

    Wilson, Charlie; Grubler, Arnulf; Gallagher, Kelly S.; Nemet, Gregory F.

    2012-11-01

    Mitigating climate change requires directed innovation efforts to develop and deploy energy technologies. Innovation activities are directed towards the outcome of climate protection by public institutions, policies and resources that in turn shape market behaviour. We analyse diverse indicators of activity throughout the innovation system to assess these efforts. We find efficient end-use technologies contribute large potential emission reductions and provide higher social returns on investment than energy-supply technologies. Yet public institutions, policies and financial resources pervasively privilege energy-supply technologies. Directed innovation efforts are strikingly misaligned with the needs of an emissions-constrained world. Significantly greater effort is needed to develop the full potential of efficient end-use technologies.

  15. Procedures and Criteria for the regulation of innovative non-medicinal technologies into the benefit catalogue of solidly financed health care insurances

    Directory of Open Access Journals (Sweden)

    Hagen, Anja

    2007-01-01

    Full Text Available Because great interest in an efficient range of effective medicinal innovations and achievements has arisen, many countries have introduced procedures to regulate the adoption of innovative non-medicinal technologies into the benefit catalogue of solidly financed health care insurances. With this as a background, this report will describe procedures for the adoption of innovative non-medicinal technologies by solidly financed health care insurances in Germany, England, Australia and Switzerland. This report was commissioned by the German Agency for Health Technology Assessment at the German Institute for Medical Documentation and Information.In order to find the relevant literature and information, systematic literature research, a hand search and a written survey were carried out. All the selected documents (chosen according to defined criteria for inclusion and exclusion were qualitatively evaluated, summarized and presented on a chart using a framework developed for this purpose. All the countries in this report require that some innovative non-medicinal technologies undergo evaluation by a central governing body. This evaluation is a prerequisite for adoption into the benefit catalogue. The process of evaluation can differ (e. g. the people and institutions concerned, the division of the synthesis of evidence and overall evaluation, processing the evidence. Similarities do exist, such as the size and composition of the governing bodies or the overreaching criteria according to which institutions must make their recommendations. This is how all the countries examined in this report determine how the benefits and effectiveness of the innovations, as well as their cost-effectiveness, can be chosen as criteria for the evaluation. Furthermore, there are many criteria which differ from country to country (social and ethical aspects, possible effects on the health system, etc. and which are also relevant to an evaluation. The preferred types of

  16. The power of disruptive technological innovation: Transcatheter aortic valve implantation.

    Science.gov (United States)

    Berlin, David B; Davidson, Michael J; Schoen, Frederick J

    2015-11-01

    We sought to evaluate the principles of disruptive innovation, defined as technology innovation that fundamentally shifts performance and utility metrics, as applied to transcatheter aortic valve implantation (TAVI). In particular, we considered implantation procedure, device design, cost, and patient population. Generally cheaper and lower performing, classical disruptive innovations are first commercialized in insignificant markets, promise lower margins, and often parasitize existing usage, representing unattractive investments for established market participants. However, despite presently high unit cost, TAVI is less invasive, treats a "new," generally high risk, patient population, and is generally done by a multidisciplinary integrated heart team. Moreover, at least in the short-term TAVI has not been lower-performing than open surgical aortic valve replacement in high-risk patients. We conclude that TAVI extends the paradigm of disruptive innovation and represents an attractive commercial opportunity space. Moreover, should the long-term performance and durability of TAVI approach that of conventional prostheses, TAVI will be an increasingly attractive commercial opportunity. © 2014 Wiley Periodicals, Inc.

  17. Bringing to Market Technological Innovation: What Distinguishes Success from Failure

    Directory of Open Access Journals (Sweden)

    Federico Frattini

    2012-09-01

    Full Text Available Commercialization is a critical step in technological innovation. Nevertheless, many scholars believe that it is often the least well-managed activity of the whole innovation process. The launch stage seems to be particularly critical in high-technology markets because of the volatility, interconnectedness and the proliferation of new technologies they experience. However, academic and practitioners’ literature has not, so far, developed a clear understanding of the factors that distinguish an effective commercialization from an unsuccessful one, especially in high-technology environments. This paper discusses the results of a research project that aimed to understand the ingredients for success in the commercialization of a technological innovation. The first stage of the research consisted of a comparative historical analysis of 18 innovations, which were commercialized in consumer high-tech markets in the last 30 years. The analysis advocates that an effective commercialization comprises three sub-strategies: Early adoption strategy, Adoption network configuration strategy and Mainstream adoption strategy, with each one characterized by a coherent set of commercialization dimensions. The relative importance of each sub-strategy in determining the innovation commercial success depends on the type of innovation that is commercialized, be it radical or incremental and discontinuous or continuous.

  18. The role of technological innovation in sustainable economic development

    OpenAIRE

    Andreea Constantinescu; Simona Frone

    2014-01-01

    As in science an accurate picture of present is highlighted from a future outlook, we should recognize the crucial role of new technologies and innovation to improve knowledge in this field. They may give guarantee of sustainable economic development, provided prioritization of research in some fields such as: information technology and communication, resource depletion and climate change. Technological innovation becomes support of all strategies and policies aimed at ensuring sustainable ec...

  19. INNOVATION TRENDS ON INFORMATION AND COMMUNICATION TECHNOLOGIES

    Directory of Open Access Journals (Sweden)

    Radu CURETEANU

    2010-12-01

    Full Text Available The importance of innovation was long underestimated in service activities. In contrast to the radical innovations vital to growth in manufacturing sectors, innovations in services and tourism were secondary and capital-scarce, and for this reason they were excluded from the scope of government interest and action. It is interesting to note that the discourse changed with the emergence of new information and communication technologies, which have been especially influential in the realm of tourism.

  20. The power of design product innovation in sustainable energy technologies

    CERN Document Server

    Reinders, Angele H; Brezet, Han

    2012-01-01

    The Power of Design offers an introduction and a practical guide to product innovation, integrating the key topics that are necessary for the design of sustainable and energy-efficient products using sustainable energy technologies. Product innovation in sustainable energy technologies is an interdisciplinary field. In response to its growing importance and the need for an integrated view on the development of solutions, this text addresses the functional principles of various energy technologies next to the latest design processes and innovation methods. From the perspec

  1. Business Models and Technological Innovation

    OpenAIRE

    Baden-Fuller, Charles; Haefliger, Stefan

    2013-01-01

    Business models are fundamentally linked with technological innovation, yet the business model construct is essentially separable from technology. We define the business model as a system that solves the problem of identifying who is (or are) the customer(s), engaging with their needs, delivering satisfaction, and monetizing the value. The framework depicts the business model system as a model containing cause and effect relationships, and it provides a basis for classification. We formulate ...

  2. Technological innovations in tissue removal during rhinologic surgery.

    Science.gov (United States)

    Sindwani, Raj; Manz, Ryan

    2012-01-01

    The modern rhinologist has a wide variety of technological innovations at his/her disposal for the removal of soft tissue and bone during endoscopic surgery. We identified and critically evaluated four leading tissue removal technologies that have impacted, or are poised to impact, rhinological surgery. A literature review was conducted. Technological functions, strengths and limitations of microdebriders, radio frequency ablation, endoscopic drills, and ultrasonic aspirators were explored. The primary drawback of powered instruments continues to be the higher costs associated with their use, and their main advantage is the ability to accomplish multiple functions such as tissue removal, suction, and irrigation, all with one tool. The effective and safe use of any powered instrument requires an intimate understanding of its function, capabilities, and limitations. Powered instrumentation continues to play a significant and evolving role in soft tissue and bone removal during rhinologic surgery.

  3. Elucidate Innovation Performance of Technology-driven Mergers and Acquisitions

    Energy Technology Data Exchange (ETDEWEB)

    Huang, L.; Wang, K.; Yu, H.; Shang, L.; Mitkova, L.

    2016-07-01

    The importance and value of Mergers and Acquisitions (M&As) have increased with the expectancy to obtain key technology capabilities and rapid impact on innovation. This article develops an original analytical framework to elucidate the impact of the technology and product relatedness (similarity/complementarity) of the Technology-driven M&A’ partners on post-innovation performance. We present results drawing on a multiple case studies of Chinese High-Tech firms from three industries. (Author)

  4. Innovative developments in uranium separation and concentration technology abroad

    International Nuclear Information System (INIS)

    Liang Jinlong; Zhou Mingsheng; Fang Wei; Sun Yuxiang

    2014-01-01

    Significance of deeply study the innovative developments in Uranium separation and concentration technology abroad was discussed. Development history and innovativeness of eight species of key equipments for separation and concentration were summarized for the first time. Principle and application of seven Uranium separation and concentration technology were analyzed systematically. It is expounded in the paper that high parameter, intelligent and low carbon were three development trends of Uranium separation and concentration technology. (authors)

  5. Functions of Innovation Systems : A new approach for analysing technological change

    NARCIS (Netherlands)

    Hekkert, M.P.; Suurs, R.A.A.; Negro, Simona; Kuhlmann, Stefan; Smits, R.E.H.M.

    2007-01-01

    The central idea of this paper is that innovation systems are a very important determinant of technological change. We describe that the emergence of a new innovation system and changes in existing innovation systems co-evolve with the process of technological change. Therefore, it is necessary to

  6. Integration Of Innovative Technologies And Affective Teaching amp Learning In Programming Courses

    Directory of Open Access Journals (Sweden)

    Alvin Prasad

    2015-08-01

    Full Text Available Abstract Technology has been integral component in the teaching and learning process in this millennium. In this review paper we evaluate the different technologies which are used to currently facilitate the teaching and learning of computer programming courses. The aim is to identify problems or gaps in technology usage in the learning environment and suggest affective solutions for technology integration into programming courses at the University levels in the future. We believe that with the inclusion of suggested innovative technologies and affective solutions in programming courses teaching and learning will be attractive and best for the programming industry.

  7. Imagining value, imagining users: academic technology transfer for health innovation.

    Science.gov (United States)

    Miller, Fiona Alice; Sanders, Carrie B; Lehoux, Pascale

    2009-04-01

    Governments have invested heavily in the clinical and economic promise of health innovation and express increasing concern with the efficacy and efficiency of the health innovation system. In considering strategies for 'better' health innovation, policy makers and researchers have taken a particular interest in the work of universities and related public research organizations: How do these organizations identify and transfer promising innovations to market, and do these efforts make best use of public sector investments? We conducted an ethnographic study of technology transfer offices (TTOs) in Ontario and British Columbia, Canada, to consider the place of health and health system imperatives in judgments of value in early-stage health innovation. Our analysis suggests that the valuation process is poorly specified as a set of task-specific judgments. Instead, we argue that technology transfer professionals are active participants in the construction of the innovation and assign value by 'imagining' the end product in its 'context of use'. Oriented as they are to the commercialization of health technology, TTOs understand users primarily as market players. The immediate users of TTOs' efforts are commercial partners (i.e., licensees, investors) who are capable of translating current discoveries into future commodities. The ultimate end users - patients, clinicians, health systems - are the future consumers of the products to be sold. Attention to these proximate and more distal users in the valuation process is a complex and constitutive feature of the work of health technology transfer. At the same time, judgements about individual technologies are made in relation to a broader imperative through which TTOs seek to imagine and construct sustainable innovation systems. Judgments of value are rendered sensible in relation to the logic of valuation for systems of innovation that, in turn, configure users of health innovation in systemic ways.

  8. Determining Technological Innovation and Competitiveness: A Cross Organizational Analysis of the Malaysian Manufacturing Industry

    Directory of Open Access Journals (Sweden)

    Amlus Ibrahim

    2012-01-01

    Full Text Available This study analyzed the determinants of technological innovation in the Malaysian manufacturing industry. Its main purpose is to identify a set of management- related variables characterizing Malaysian innovative firms. Moreover, the study aimed to test whether the set of determinant differs for firms with different technological trajectories. A sample of 204 Malaysian firms was used for the investigation, with one respondent from each firm. The questionnaire measured the technological innovation, as well as 5 main potential determinants of innovation adopted from literature. Statistical analysis used, including bivariate correlation and multivariate regression, in identifying association between the technological innovation and the determining variables. The results of the analysis lead the researcher to the model of 5 important determining factors of technological innovation. The important factors were intensity of R&D, trvhnoogical trajectories,intensity of marketing, engineers, scientist and managers with experience locally and technical competency of personnel,. The analysis of technological trajectories confirmed the hypotheses that set of important determinants of innovation as well as the extent of technological innovation differs for firms in different innovation processes.Keywords: Technologies trajectories, technological innovation, intensity of R&D.

  9. Using the regularities of high and critical technologies developing in innovative project management

    Directory of Open Access Journals (Sweden)

    S. G. Selivanov

    2014-01-01

    Full Text Available Problem-orientated to the innovative activity, computer-aided systems of production engineering (CASPE integrates design, manufacture, and organization activities using the interrelated innovation principles thus leaning the innovative activity towards the creation of innovative products and technological innovations of high science and technology level and efficiency. In this situation the innovative activity uses in practice not only the newest experience, but also the science laws and consequences, that is, in particular, “Science of Innovations”. The mentioned science laws explain wave dynamics of technical (technological systems development. In the course of innovation activities and/or innovation designing a modification of continuously acting technological system, usually, causes its developing and growing upwards by Sshaped curve. Changing a principle of action changes S-shaped curve development (Fig. 1. If such changes are within the certain “trace tube” we are entitled to state the steady system development.Analysis of changing target function of technological system within the “trace tube” of its steady development characterizes its growing wave dynamics (Fig. 1 using the S-shaped curves (sigmoid type relations. S-shaped innovative development relations of technological systems are, usually, explained by different mathematical models, each being in compliance with the certain process of science and technology. Singular innovative project management using the S-shaped curves can be explained by the following example (Fig.2.To use such management technique it is very important to know the mathematical models of S-curves for different types of innovation projects. That is why we consider given S-shaped relations in-detail for:- developing the high and critical technologies during R&D implementation using the cutting-edge CASSR (computer-aided systems of scientific research of high and critical technologies in innovation

  10. [Hospital-based health technology assessment in France: how to proceed to evaluate innovative medical devices?].

    Science.gov (United States)

    Martelli, N; van den Brink, H; Denies, F; Dervaux, B; Germe, A F; Prognon, P; Pineau, J

    2014-01-01

    Innovative medical devices offer solutions to medical problems and greatly improve patients' outcomes. Like National Health Technology Assessment (HTA) agencies, hospitals face numerous requests for innovative and costly medical devices. To help local decision-makers, different approaches of hospital-based HTA (HB-HTA) have been adopted worldwide. The objective of the present paper is to explore HB-HTA models for adopting innovative medical devices in France and elsewhere. Four different models have been conceptualized: "ambassador" model, "mini-HTA" model, "HTA unit" model and "internal committee". Apparently, "HTA unit" and "internal committee" (or a mixture of both models) are the prevailing HB-HTA models in France. Nevertheless, some weaknesses of these models have been pointed out in previous works. Only few examples involving hospital pharmacists have been found abroad, except in France and in Italy. Finally, the harmonization of the assessment of innovative medical devices in France needs a better understanding of HB-HTA practices. Copyright © 2013 Elsevier Masson SAS. All rights reserved.

  11. Innovative Technologies for the Protection of Historical Structures against Earthquakes

    Directory of Open Access Journals (Sweden)

    Fuat Aras

    2016-01-01

    This study aims to represent innovative technologies and strategies to preserve the cultural heritage structures against earthquake effect. In particular, the application of fibre reinforced polymers and structural control systems are explained. Suitability of the strategies to architectural, historical and structural features and reversibility aspects are evaluated. As a case study the application of these strategies to a historical building in Istanbul is discussed.

  12. Technological Innovation – A Route Towards Sustainability

    Directory of Open Access Journals (Sweden)

    Gráinne Kavanagh

    2012-06-01

    Full Text Available The sustainability of small and medium-sized enterprises (SMEs  is constantly challenged on today’s dynamic operating environment. Evolving regulatory trends, difficult economic conditions, and diminishing natural resources, pose serious questions for all players across the food system. Technological innovation, as a means of ensuring future sustainability in the same in the face of such challenges, has been the focus of significant government investment in Ireland. This paper, aims to facilitate a greater understanding of the motivations and barriers influencing the decision by food SMEs to invest in technological innovation emanating from research conducted in publicly‐funded research institutes.

  13. Water Technology Innovation: 10 Market Opportunities

    Science.gov (United States)

    The Water Technology Innovation Blueprint offers an overview of market opportunities that include conserving and recovering energy, recovering nutrients, improving water infrastructure, reducing costs for water monitoring, and improving water quality.

  14. Portable x-ray fluorescence spectrometer. Innovative technology summary report

    International Nuclear Information System (INIS)

    1998-12-01

    This report describes the application of portable X-ray fluorescence (XRF) spectrometry to characterize materials related to deactivation and decommissioning (D and D) of contaminated facilities. Two portable XRF instruments manufactured by TN Spectrace were used in a technology evaluation as part of the Large-Scale Demonstration Project (LSDP) held at the Chicago Pile-5 Research Reactor (CP-5) located at Argonne National Laboratory (ANL). The LSDP is sponsored by the US Department of Energy (DOE), Office of Science and Technology, Deactivation and Decommissioning Focus Are (DDFA). The objective of the LSDP is to demonstrate innovative technologies or technology applications potentially beneficial to the D and D of contaminated facilities. The portable XRF technology offers several potential benefits for rapid characterization of facility components and contaminants, including significant cost reduction, fast turnaround time,a nd virtually no secondary waste. Field work for the demonstration of the portable XRF technology was performed from August 28--September 3, 1996 and October 30--December 13, 1996

  15. Decoupling management and technological innovations: Resolving the individualism-collectivism controversy

    OpenAIRE

    Cerne, Matej; Jaklic, Marko; Skerlavaj, Miha

    2013-01-01

    This is the authors' final and accepted version of the article, post refereeing. Publisher's version is available at www.sciencedirect.com This study aims to resolve the contradictory previous research findings on the relationship between individualism–collectivism and innovation. We draw on innovation theory and relate to the difference between non-technological (management) and technological innovation types as well as to the distinction between exploration and exploitation (inv...

  16. Challenges to the Indicators on Science, Technology and Innovation Development

    OpenAIRE

    Chobanova, Rossitsa

    2006-01-01

    The paper attempts to define the challenges to the indicators on science, technology and innovation development which result from the contemporary dynamics of the global knowledge based economy progress and the pursued challenges of identification of the specific national priority dimensions for public funding research and innovation projects on the case of Bulgaria. It is argued that recent the most widespread methodologies of positioning science, technology and innovation indicators do not ...

  17. Governing Science, Technology and Innovation:

    DEFF Research Database (Denmark)

    Jensen, Jens Stissing

    2007-01-01

    Abstract: As an object of public management, Science, Technology and Innovation (STI) is characterised by a high level of uncertainty and complexity. The paper argues that to cope with the phenomenon of STI as a coherent area of policy formulation and regulation, a balancing of rational-, reflexi...

  18. DIAGNOSTIC AND PROPOSAL OF IMPROVEMENT FOR THE INNOVATION MANAGEMENT IN A TECHNOLOGICAL COMPANY

    Directory of Open Access Journals (Sweden)

    Rossetti, Germán

    2017-12-01

    Full Text Available The Innovation Management is defined as the process oriented to organize and lead available resources, both technical and economic, with the objective of increasing the creation of new products, processes, knowledge and their application in the structure of the company. Nowadays companies are immersed in a globalized world, where competition is higher, which implies their growing interest in innovating, developing and improving their products or services to take a leading position in the market. Therefore, it is essential to be at the vanguard of current needs and to use certain tools that help to offer better products or services, and to obtain higher benefits, economic and social, technological, prestige, among others. In this paper a diagnostic and proposal of improvement for the Innovation Management in a technology-based company, located in the province of Santa Fe, Argentina, is made. For this, a methodology that allows to evaluate the capacity to innovate of the company is applied. As a main conclusion, it can be said that the diagnostic and proposal of improvement provided to the company is the starting point to ensure a successful and continuous innovation management.

  19. Technological innovation capability in Malaysian-owned resource-based manufacturing companies: Early findings

    Science.gov (United States)

    Razali, Nur Fhathyhah; Mohd Suradi, Nur Riza; Ahmad Shahabuddin, Faridatul Azna; Ismail, Wan Rosmanira; Abidin, Norkisme Zainal; Ahmad, Nor Amalina; Mustafa, Zainol

    2013-04-01

    This study aims to identify the determinants of technological innovation capability of Malaysian-owned companies in the resources-based manufacturing, to identify the relationship between technological innovation capability (TIC) and technological innovation performance (TIP) for the resource-based manufacturing. Furthermore, this study also aims to identify innovation capability factors that need more emphasis and improvements from the respective authority. The scope of the study covers four industries which are petrochemical industries, pharmaceutical industries, palm oil-based industries and food processing industries which are located in the state of Selangor. Descriptive analysis, correlation analysis and performance capability analysis were used in this study. It was found that, technological innovation capabilities (TIC) for companies in the resource-based manufacturing are moderate. Factors such as policies capability, human resources capability and facilities capability have a positive relationship with the performance of technological innovation (TIP). These findings will help the government in making decisions and better implementation of policies to strengthen the competitiveness of the company, particularly in resource-based manufacturing.

  20. Innovative and basic researches for high temperature technologies at HTTR

    International Nuclear Information System (INIS)

    Shiozawa, Shusaku

    1995-01-01

    The HTTR is the first HTGR which is under construction at JAERI. The objectives of the HTTR are to establish basic technologies for HTGRs, to upgrade technologies for HTGRs and to conduct innovative and basic researches for high temperature technologies. The first two are concerned with HTGR developments. The last one is not necessarily for HTGR developments, but for future innovative researches which are expected to be applied to various technologies. (author)

  1. Canonical correlation analysis between collaborative networks and innovation: A case study in information technology companies in province of Tehran, Iran

    Directory of Open Access Journals (Sweden)

    Ahmad Jafar Nejad

    2013-07-01

    Full Text Available The increase competitions as well as technological advancements have created motivation among business owners to look for more innovative ideas from outside their organizations. Many enterprises collaborate with other organizations to empower themselves through innovative ideas. These kinds of collaborations can be observed as a concept called Regional Innovation System. These collaborations include inter-firm collaborations, research organizations, intermediary institutions and governmental agencies. The primary objective of this paper is to evaluate relationships between Collaborative Networks and Innovation in information technology business units located in province of Tehran, Iran. The research method utilized for the present study is descriptive-correlation. To evaluate the relationships between independent and dependent variables, canonical correlation analysis (CCA is used. The results confirm the previous findings regarding the relationship between Collaborative Networks and Innovation. Among various dimensions of Collaboration, Collaboration with governmental agencies had a very small impact on the relationship between collaboration networks and innovation. In addition, the results show that in addition to affecting product innovation and process innovation, collaboration networks also affected management innovation.

  2. Cone penetrometer: Innovative technology summary report

    International Nuclear Information System (INIS)

    1996-04-01

    Cone penetrometer technology (CPT) provides cost-effective, real-time data for use in the characterization of the subsurface. Recent innovations in this baseline technology allow for improved access to the subsurface for environmental restoration applications. The technology has been improved by both industry and government agencies and is constantly advancing due to research efforts. The U.S. Department of Energy (DOE) Office of Science and Technology (formerly Technology Development) has contributed significantly to these efforts. This report focuses on the advancements made in conjunction with DOE's support but recognizes Department of Defense (DOD) and industry efforts

  3. Technological Innovation: Concept, Process, Typology and Implications in the Economy

    Directory of Open Access Journals (Sweden)

    Mihaela DIACONU

    2011-10-01

    Full Text Available Growing interest worldwide to boost innovation in business sector activities, especially the technology, is intended to maintain or increase national economic competitiveness, inclusively as an effect of awareness concerning the effects resulting from economic activity on consumption of resources and environment, which requires design of new patterns of production and consumption. In this paper we review the most important contributions in the literature in terms of the implications of technological innovation in the economy, at the microand macroeconomic level, viewing the organization's ability to generate new ideas in support of increasing production, employment and environmental protection, starting from the concepts of innovation, innovation process and, respectively, from the innovation typology analysis.

  4. The Technological Innovations and Their Impact on the Economy

    Directory of Open Access Journals (Sweden)

    Mikhail Ivanovich Maslennikov

    2017-12-01

    Full Text Available Drastic and inclusive technology progress is changing the economy of Russia and foreign countries. This progress significantly impacts production forces. . This paper analyzes theoretical and applied approaches to the investigation of production forces development. I reveal the role and importance of innovations in science and technology as well as their impact on various segments of the economy. I analyze the conceptual framework used for technological shifts. The paper describes the indicators showing the level of scientific and technological potential development in various countries and regions including the Urals. I define growth areas in technology and assess their contribution to gross domestic product (GDP growth. The administrations and authorities at federal and regional levels impact the development of science, innovations, technologies and breakthrough areas. The development of these spheres leads to the increase in productivity of social activities, production and business activity. The paper reveals the impact of the technological breakthrough in such latest fields as the alternative energy sources, drones, electric car industry, storage and delivery of energy. This fields transform the economy and society. Furthermore, they change theoretical concepts of functional and institutional social structure. The development paradigm is to be modified from fuel and raw model to the innovative and technological one. The economic development and scientific and technological potential are interrelated. I discuss the reason of close attention to the development of science, technologies, innovations in the developed countries. as well as the measures to stimulate their development. The article studies the mechanism and tools of science and education funding in various regions of the world. The results of the research may be used for updating the strategy of scientific and technological development of Russia and its regions in the current

  5. Concept relation discovery and innovation enabling technology (CORDIET)

    NARCIS (Netherlands)

    Poelmans, J.; Elzinga, P.; Neznanov, A.; Viaene, S.; Kuznetsov, S.O.; Ignatov, D.; Dedene, G.

    2011-01-01

    Concept Relation Discovery and Innovation Enabling Technology (CORDIET), is a toolbox for gaining new knowledge from unstructured text data. At the core of CORDIET is the C-K theory which captures the essential elements of innovation. The tool uses Formal Concept Analysis (FCA), Emergent Self

  6. THE APPLICATION OF FORESIGHT PROJECTS IN FORMATION OF TECHNOLOGICAL COMPANIES’ INNOVATION DEVELOPMENT STRATEGY

    Directory of Open Access Journals (Sweden)

    M. E. Zolotareva

    2016-01-01

    Full Text Available In the article is considered the possibility of application of methodology of foresight to the formation of strategy of innovative development of technological companies. The application of existing approaches to defining targets and goals of innovation development does not meet the requirements of the nonlinearity of the modern processes of technological companies’ innovation development.The goals and objectives. The purpose of this article is to study the possibilities of application of methods of foresight in forming of technological companies’ innovation development strategy. To achieve the goal, the author has solved the following problems: considered the interrelationship and interdependence between corporate strategy and technological companies’ innovation development strategy; defined the main problems of formation technological companies’ innovation development strategies; revealed the concept of "foresight" and diff erence in methodology of foresight and traditional forecasting techniques; defined the basic principles of foresight; presents the main stages of the foresight project implementation in technological companies.Research methods. The theoretical basis of the study are the publications of Russian and foreign scientists in the field of formation and development of innovation strategies through the application of foresight methods at the level of national innovation system and at company level. As a methodological basis of the study used methods of analysis, synthesis, induction method, deduction method, the comparison, was applied certain aspects of the synergetic analysis.Summary. The results of Russian and foreign researchers systematized by author confirm the possibility and necessity foresight projects implementation in formation and adjustment of technological companies’ innovation development strategies and in the national innovation system development. The principles of engagement of various social forces

  7. Innovation and technology transfer through global value chains: Evidence from China's PV industry

    International Nuclear Information System (INIS)

    Zhang, Fang; Gallagher, Kelly Sims

    2016-01-01

    China's success as a rapid innovation follower in the infant Photovoltaic (PV) industry surprised many observers. This paper explores how China inserted itself into global clean energy innovation systems by examining the case of the solar PV industry. The paper decomposes the global PV industrial value chain, and determines the main factors shaping PV technology transfer and diffusion. Chinese firms first entered PV module manufacturing through technology acquisition, and then gradually built their global competitiveness by utilizing a vertical integration strategy within segments of the industry as well as the broader PV value chain. The main drivers for PV technology transfer from the global innovation system to China are global market formation policy, international mobilization of talent, the flexibility of manufacturing in China, and belated policy incentives from China's government. The development trajectory of the PV industry in China indicates that innovation in cleaner energy technologies can occur through both global and national innovation processes, and knowledge exchange along the global PV value chain. - Highlights: •The value chain analytical approach is synergized with the theories of technology transfer and innovation systems. •A detailed review of how China integrated itself into the global solar PV innovation system is provided. •Four main factors shape PV technology transfer to China across various value chain segments. •Innovation in cleaner energy technologies is a combination of global and national innovation processes.

  8. What drives innovation in renewable energy technology? Evidence based on patent counts

    Science.gov (United States)

    McCormick, Jesse

    America's future economic growth and international competitiveness depend on our capacity to innovate, particularly in emerging global markets. This paper analyzes the forces that drive innovation in one such market, renewable energy technologies, utilizing the theory of induced technological innovation. Specifically, this paper operationalizes the determinants of innovation to consist of: 1) private market forces, 2) public policy that influences price and market size, and 3) public policy that catalyzes R&D investment. Analysis is conducted using a negative binomial regression to determine which of the three foundational determinants has the greatest impact on renewable energy innovation. In so doing this paper builds off of work conducted by Johnstone et al. (2010). Innovation is measured using European Patent Office data on a panel of 24 countries spanning the period from 1978-2005. The implications of this study are straightforward; policies, not market forces, are responsible for driving innovation in renewable energy technologies. Market-oriented policies are effective for mature technologies, particularly hydro, and to a lesser extent wind and solar power. R&D-oriented policy is effective for a broader technology set. In short, the United States needs a comprehensive policy environment to support renewable energy innovation; market forces alone will not provide the pace and breadth of innovations needed. That environment can and should be strategically targeted, however, to effectively allocate scare resources.

  9. Model for acquiring innovative waste immobilization technologies

    International Nuclear Information System (INIS)

    Dole, L.R.; Singh, S.P.N.

    1988-01-01

    The US Department of Energy's (DOE's) Oak Ridge Operations (ORO) has established the Waste Management Technology Center (WMTC) at Oak Ridge National Laboratory to assist in meeting the environmental requirements for federal facilities as stated in the Resource Conservation and Recovery Act (RCRA) and the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA). The WMTC will bring innovative mixed chemical and radioactive waste treatment and site closure technologies to bear on the many mixed chemical and radioactive waste problems at the DOE-ORO facilities located in Tennessee, Kentucky, and Ohio. The WMTC seeks innovative technologies through a phased procurement cycle that encourages the teaming of emerging technologies with experienced contractors in order to comply with on-site requirements of DOE orders concerning protection of the environment. This three-phase procurement cycle includes: (1) a feasibility study and implementation plan, (2) an on-site pilot demonstration, and (3) full-scale implementation. This paper describes the statements of work for some related demonstrations and remedial actions

  10. The Disposition Parameters of the Technological and Innovation Gap in the Global Economy

    Directory of Open Access Journals (Sweden)

    Mikaelian Suren G.

    2017-12-01

    Full Text Available The aim of the study is to specify the disposition parameters of the technological and innovation gap in the global economy and determine the directions for overcoming it. It is proved that the process of technological asymmetry is reflected in the technological and innovation gap in the global economy. The positions of the countries-innovation leaders are clarified with the attention being focused on the growth of China’s influence through its efforts in technological innovations. There described the transformation of the positions in two planes: production of and trade in high-tech products. A hypothesis about the change in the nature of innovations during the last decade is confirmed. It is proved that the affordability of the formation of advanced technologies in China has become a reason for its transformation into the powerhouse of the world economic development. There identified and characterized the directions for bridging the gap between economies, which include increasing investment on the global innovation scale; promoting the spread of technologies and their adaptation; ensuring an unimpeded flow of talents and knowledge; using intellectual property rights to promote innovation for the poor, improve the innovation efficiency; entering markets.

  11. How innovation commons contribute to discovering and developing new technologies

    Directory of Open Access Journals (Sweden)

    Darcy W.E. Allen

    2016-09-01

    Full Text Available In modern economics, the institutions surrounding the creation and development of new technologies are firms, markets and governments. We propose an alternative theory that locates the institutional origin of new technologies further back in the commons when self-organizing groups of technology enthusiasts develop effective governance rules to pool distributed information resources. The ‘innovation commons’ alleviates uncertainty around a nascent technology by pooling distributed information about uses, costs, problems and opportunities. While innovation commons are mostly temporary, because the resource itself – the information about opportunities – is only temporarily valuable, they are a further addition to the Pantheon of commons, and suggest that the institutions of the commons – and the common pool resource of information about applications of the technology – may be far more important in the study of innovation than previously thought.

  12. Roadmapping and Strategy in Science, Technology and Innovation: Why connectivity matters

    DEFF Research Database (Denmark)

    Ricard, Lykke Margot

    The thesis focuses on the coordination of technology-intensive innovation activities at both sector and firm levels, supported by the use of the strategic roadmapping method. Investigations combine qualitative and quantitative research methods; using a narrative approach in the form of interviews...... as an interactive process to develop competences among technology users, producers, research institutions, and politicians. As a result, knowledge on how the platforms evolved, and their dynamics, provide new reflections on the innovation systems approach: that connectivity seems to change along the changes...... to uncover innovation and technology barriers, and a social network analysis of stakeholders’ role in relation to two technology platforms: TPWind and ZEP (Zero Emission Platform), during a five-year period when the roadmaps 2020 were developed. In this respect, the thesis emphasizes the view of innovation...

  13. R-IDEAL: A Framework for Systematic Clinical Evaluation of Technical Innovations in Radiation Oncology.

    Science.gov (United States)

    Verkooijen, Helena M; Kerkmeijer, Linda G W; Fuller, Clifton D; Huddart, Robbert; Faivre-Finn, Corinne; Verheij, Marcel; Mook, Stella; Sahgal, Arjun; Hall, Emma; Schultz, Chris

    2017-01-01

    The pace of innovation in radiation oncology is high and the window of opportunity for evaluation narrow. Financial incentives, industry pressure, and patients' demand for high-tech treatments have led to widespread implementation of innovations before, or even without, robust evidence of improved outcomes has been generated. The standard phase I-IV framework for drug evaluation is not the most efficient and desirable framework for assessment of technological innovations. In order to provide a standard assessment methodology for clinical evaluation of innovations in radiotherapy, we adapted the surgical IDEAL framework to fit the radiation oncology setting. Like surgery, clinical evaluation of innovations in radiation oncology is complicated by continuous technical development, team and operator dependence, and differences in quality control. Contrary to surgery, radiotherapy innovations may be used in various ways, e.g., at different tumor sites and with different aims, such as radiation volume reduction and dose escalation. Also, the effect of radiation treatment can be modeled, allowing better prediction of potential benefits and improved patient selection. Key distinctive features of R-IDEAL include the important role of predicate and modeling studies (Stage 0), randomization at an early stage in the development of the technology, and long-term follow-up for late toxicity. We implemented R-IDEAL for clinical evaluation of a recent innovation in radiation oncology, the MRI-guided linear accelerator (MR-Linac). MR-Linac combines a radiotherapy linear accelerator with a 1.5-T MRI, aiming for improved targeting, dose escalation, and margin reduction, and is expected to increase the use of hypofractionation, improve tumor control, leading to higher cure rates and less toxicity. An international consortium, with participants from seven large cancer institutes from Europe and North America, has adopted the R-IDEAL framework to work toward coordinated, evidence

  14. Investigating the Influence of Technology Inflows on Technology Outflows in Open Innovation Processes : A Longitudinal Analysis

    NARCIS (Netherlands)

    Sikimic, U.; Chiesa, V.; Frattini, F.; Scalera, V.G.

    2016-01-01

    The open innovation (OI) paradigm emphasizes the importance of integrating inbound and outbound flows of technology to increase a firm's innovation performance. While the synergies between technology inflows and outflows have been discussed in conceptual OI articles, the majority of empirical

  15. An inquiry on dimensions of external technology search and their influence on technological innovations: evidence from Chinese firms

    DEFF Research Database (Denmark)

    Li-Ying, Jason; Wang, Yuandi; Salomo, Søren

    2014-01-01

    A central part of technological innovation for industrial firms involves search for new external knowledge. A well‐established stream of literature on firms' external knowledge search has demonstrated that firms investing in broader search may have a great ability to innovate. In this paper, we...... explore the influences of technology search on firms' technological innovation performance along three distinctive dimensions: technical, geographic, and temporal dimensions, using a unique panel data set containing information on Chinese firms that were active in technology in‐licensing and patenting...... during the period 2000–2009. Our findings reveal that Chinese firms' technological innovation performances are related to external technology search in quite different ways from the ones suggested in the extant literature using evidence from developed countries. We find that Chinese firms searching...

  16. Innovative Technologies in Science Teaching

    Science.gov (United States)

    Guerra, Cecilia; Pombo, Lucia; Moreira, Antonio

    2011-01-01

    Technology plays a crucial role in pupils' and primary teachers' lives nowadays and its use can facilitate change towards an innovative school environment. The internet, for example, can act as a platform to foster science teaching and offers a variety of opportunities for effective science learning and engaging and motivating children. But…

  17. Technology Integration and Innovation during Reflective Teaching

    Science.gov (United States)

    Baporikar, Neeta

    2016-01-01

    With emerging innovations, the use of technology tools to make learning process effective is foreseeable. Hence, appropriate incorporation of technology can make a valuable contribution to the learning and undoubtedly reflection is core to learning. With today's twenty-first century learners, it is important that educators advocate integrating…

  18. Innovation diffusion, technological convergence and economic growth

    OpenAIRE

    R. Andergassen; F. Nardini; M. Ricottilli

    2013-01-01

    The paper investigates the mechanics through which novel technological principles are developed and diffused throughout an economy consisting of a technologically heterogeneous ensemble of firms. In the model entrepreneurs invest in the discovery and in the diffusion of a technological principle and their profit flow depends on how many firms adopt the innovation and on how long it takes other entrepreneurs to improve it. We show that technological convergence emerges from the competition amo...

  19. River Protection Project Technology and Innovation Roadmap.

    Energy Technology Data Exchange (ETDEWEB)

    Reid, D. S. [Hanford Site (HNF), Richland, WA (United States); Wooley, T. A. [Hanford Site (HNF), Richland, WA (United States); Kelly, S. E. [Hanford Site (HNF), Richland, WA (United States)

    2017-08-14

    The Technology and Innovation Roadmap is a planning tool for WRPS management, DOE ORP, DOE EM, and others to understand the risks and technology gaps associated with the RPP mission. The roadmap identifies and prioritizes technical areas that require technology solutions and underscores where timely and appropriate technology development can have the greatest impact to reduce those risks and uncertainties. The roadmap also serves as a tool for determining allocation of resources.

  20. Bringing to Market Technological Innovation: What Distinguishes Success from Failure

    OpenAIRE

    Frattini, Federico; Massis, Alfredo De; Chiesa, Vittorio; Cassia, Lucio; Campopiano, Giovanna

    2012-01-01

    Commercialization is a critical step in technological innovation. Nevertheless, many scholars believe that it is often the least well-managed activity of the whole innovation process. The launch stage seems to be particularly critical in high-technology markets because of the volatility, interconnectedness and the proliferation of new technologies they experience. However, academic and practitioners' literature has not, so far, developed a clear understanding of the factors that distinguish a...

  1. Using the regularities of high and critical technologies developing in innovative project management

    OpenAIRE

    S. G. Selivanov; S. V. Poezjalova; A. F. Shayhulova

    2014-01-01

    Problem-orientated to the innovative activity, computer-aided systems of production engineering (CASPE) integrates design, manufacture, and organization activities using the interrelated innovation principles thus leaning the innovative activity towards the creation of innovative products and technological innovations of high science and technology level and efficiency. In this situation the innovative activity uses in practice not only the newest experience, but also the science laws and con...

  2. Innovation Environment in Small Technology-Based Companies

    Directory of Open Access Journals (Sweden)

    Gabriela Gonçalves Silveira Fiates

    2010-11-01

    Full Text Available Innovation has been identified as a strategy to achieve competitive advantage, particularly in contexts of change and especially for technology-based companies – TBCs. Although the adoption of innovation strategies is not easy, small companies have an organizational environment more conducive to innovation. This article examines how managers and employees of small TBCs perceive aspects of the internal environment of innovation in the organization (culture, organizational structure, personnel and infrastructure and their suitability for the innovation process. This is a qualitative research from a multicase study on five companies located in an incubator. Data were collected through open interviews, using a semi-structured script, with one of the managers and two employees from each company. Data were analyzed from preliminary content analysis. The results showed some discrepancies between the perceptions of managers and employees about the issues investigated and their suitability for the innovation system, as well as between reality and the theoretical basis used.

  3. Business model innovation vs. business model inertia: The role of disruptive technologies

    OpenAIRE

    Vorbach, Stefan; Wipfler, Harald; Schimpf, Sven

    2017-01-01

    This contribution addresses the impact of disruptive technologies on business model innovation. While such technologies have the potential to significantly alter the way in which businesses operate, business model inertia hinders companies from adopting the new technological possibilities. Little research has focused on the difficulties incumbents face when innovating their business models. By reviewing current literature on business model innovation, this paper summarizes challenges companie...

  4. Technological economics: innovation, project management, and technology transfer

    Energy Technology Data Exchange (ETDEWEB)

    Bradbury, F R

    1981-06-01

    The relationship between economics and technology, as well as their interaction in production, productivity, project management, and in technology transfer processes are reviewed. Over the last two decades there has been an increasing interest by economists in the technologist's view of technical change and its mechanisms. The author looks at the zone between technology and economics, the technological economics, and discusses the theory of innovation recently sketched out by Nelson and Winter. The relevance to project management and technology transfer of contemporary writing by economists leads to the view that there are welcome signs of a convergence of the conceptual models now emerging and the practical problems of technology management and movement. Economists now seem more willing to come to terms with technology than technologists with economics. The economic significance of the multitudes of technically unglamorous activities in development work is seriously neglected as a result of over-emphasis on the spectacular technological break. If economic elegance were to be admitted to the criteria of success, one might get a significant improvement in the engineering of technological change. 29 references, 4 figure.

  5. Determinants of the pace of global innovation in energy technologies.

    Science.gov (United States)

    Bettencourt, Luís M A; Trancik, Jessika E; Kaur, Jasleen

    2013-01-01

    Understanding the factors driving innovation in energy technologies is of critical importance to mitigating climate change and addressing other energy-related global challenges. Low levels of innovation, measured in terms of energy patent filings, were noted in the 1980s and 90s as an issue of concern and were attributed to limited investment in public and private research and development (R&D). Here we build a comprehensive global database of energy patents covering the period 1970-2009, which is unique in its temporal and geographical scope. Analysis of the data reveals a recent, marked departure from historical trends. A sharp increase in rates of patenting has occurred over the last decade, particularly in renewable technologies, despite continued low levels of R&D funding. To solve the puzzle of fast innovation despite modest R&D increases, we develop a model that explains the nonlinear response observed in the empirical data of technological innovation to various types of investment. The model reveals a regular relationship between patents, R&D funding, and growing markets across technologies, and accurately predicts patenting rates at different stages of technological maturity and market development. We show quantitatively how growing markets have formed a vital complement to public R&D in driving innovative activity. These two forms of investment have each leveraged the effect of the other in driving patenting trends over long periods of time.

  6. Impact of Technological Innovations on Customers in an Emerging Banking Industry in Ghana

    DEFF Research Database (Denmark)

    Kofi Wireko, Joseph; Ameme, Bright

    2016-01-01

    . Whilst banks derive efficiency from these innovations, customers are however impacted with convenience and transaction costs offered by these innovative services and electronic activities. This study sought to understand the impact of these electronic banking services on customer satisfaction and related....... Whilst the study concluded that there is a significant relationship between customer satisfaction and technological innovations in the Ghanaian banking industry, it was revealed that the costs associated with technological innovations in banking have also increased transactions costs to the disadvantages......Without continuous technological innovations in today’s highly digital world, it will be extremely difficult for banks to remain relevant within the competitive landscape. Bank customers are also becoming very sophisticated and their demands drive the direction of these technological innovations...

  7. Technology Transmission Across National Innovation Systems

    DEFF Research Database (Denmark)

    Haakonsson, Stine Jessen; Slepniov, Dmitrij

    This paper advances our understanding of how technology upgrading in the Chinese wind turbine industry is linked to internationalisation of Danish component suppliers. In order to grasp the interlinkages and implications hereof, the paper combines perspectives of global value chains (GVC), national.......e. linking up with global suppliers in the wind turbine global value chain, and the new role of component suppliers as technology transmitters across national innovation systems into emerging markets. Conceptually, the paper contributes to understanding how technological catching up in value chains links...

  8. Technology Transmission Across National Innovation Systems

    DEFF Research Database (Denmark)

    Haakonsson, Stine Jessen; Slepniov, Dmitrij

    2018-01-01

    This paper advances our understanding of how technology upgrading in the Chinese wind turbine industry is linked to internationalisation of Danish component suppliers. In order to grasp the interlinkages and implications hereof, the paper combines perspectives of global value chains (GVC), national.......e. linking up with global suppliers in the wind turbine global value chain, and the new role of component suppliers as technology transmitters across national innovation systems into emerging markets. Conceptually, the paper contributes to understanding how technological catching up in value chains links...

  9. Modeling technology innovation: how science, engineering, and industry methods can combine to generate beneficial socioeconomic impacts.

    Science.gov (United States)

    Stone, Vathsala I; Lane, Joseph P

    2012-05-16

    Government-sponsored science, technology, and innovation (STI) programs support the socioeconomic aspects of public policies, in addition to expanding the knowledge base. For example, beneficial healthcare services and devices are expected to result from investments in research and development (R&D) programs, which assume a causal link to commercial innovation. Such programs are increasingly held accountable for evidence of impact-that is, innovative goods and services resulting from R&D activity. However, the absence of comprehensive models and metrics skews evidence gathering toward bibliometrics about research outputs (published discoveries), with less focus on transfer metrics about development outputs (patented prototypes) and almost none on econometrics related to production outputs (commercial innovations). This disparity is particularly problematic for the expressed intent of such programs, as most measurable socioeconomic benefits result from the last category of outputs. This paper proposes a conceptual framework integrating all three knowledge-generating methods into a logic model, useful for planning, obtaining, and measuring the intended beneficial impacts through the implementation of knowledge in practice. Additionally, the integration of the Context-Input-Process-Product (CIPP) model of evaluation proactively builds relevance into STI policies and programs while sustaining rigor. The resulting logic model framework explicitly traces the progress of knowledge from inputs, following it through the three knowledge-generating processes and their respective knowledge outputs (discovery, invention, innovation), as it generates the intended socio-beneficial impacts. It is a hybrid model for generating technology-based innovations, where best practices in new product development merge with a widely accepted knowledge-translation approach. Given the emphasis on evidence-based practice in the medical and health fields and "bench to bedside" expectations for

  10. Mozambique Science, Technology and Innovation Review | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    This project aims to strengthen the capacity of the Mozambique Ministry of Science and Technology (MOST) to govern the country's science, technology and innovation (STI) system, and of researchers and policymakers to conduct systematic reviews of STI policy implementation. It will do so by supporting a review of the ...

  11. Health, Work Intensity, and Technological Innovations

    OpenAIRE

    Raouf Boucekkine; Natali Hritonenko; Yuri Yatsenko

    2013-01-01

    Work significantly affects human life and health. Overworking may decrease the quality of life and cause direct economic losses. Technological innovations encourage modernization of firms' capital and improve labor productivity in the workplace. The paper investigates the optimal individual choice of work intensity under improving technology embodied in new equipment leading to shorter lifetime of capital goods (obsolescence). The balanced growth trajectories are analyzed in this context to f...

  12. 78 FR 70963 - NASA Advisory Council; Technology and Innovation Committee; Meeting

    Science.gov (United States)

    2013-11-27

    ... of the Technology and Innovation Committee (TIC) of the NASA Advisory Council (NAC). The meeting will... Propellant Storage and Transfer; and a discussion of barriers to innovation and innovation enablers. DATES... Barriers to Innovation and Innovation Enablers The meeting will be open to the public up to the seating...

  13. Site Characterization Analysis Penetrometer System (SCAPS): An Innovative Technology Evaluation Report

    National Research Council Canada - National Science Library

    Jack, Lary

    1995-01-01

    ... of subsurface soil at hazardous waste sites. The effectiveness of each technology was evaluated by comparing each technology's results to the results obtained using conventional reference methods...

  14. Enhancing technological innovation in small firms: Role of collaboration

    International Nuclear Information System (INIS)

    Singh, D; Khamba, J S; Nanda, T

    2014-01-01

    Contribution of Micro-Small and Medium Enterprises (MSMEs) is highly remarkable in the overall industrial economy of the country. In recent years, the MSME sector has consistently registered higher growth rate compared to the overall industrial sector. With its agility and dynamism, the sector has shown admirable innovativeness and adaptability to survive the recent economic downturn and recession. However, MSMEs growth rate is still at low level. Therefore, it becomes essential for organizations to adopt new technologies or upgrade existing setup to meet continuously changing global market and fulfill customer needs. This paper explores the relationships between different collaboration networks and technological innovation of small firms through an extensive review of literature. The study finds that collaboration with larger enterprises, R and D institutions, universities and government agencies play a significant role in enhancing technological innovation in small firms

  15. Small Business Innovation Research and Small Business Technology Transfer Programs

    Science.gov (United States)

    Garrison, Lynn; Jasper, Gwen

    2015-01-01

    The Small Business Innovation Research (SBIR)/Small Business Technology Transfer (STTR) programs fund the research, development, and demonstration of innovative technologies that fulfill NASA's needs as described in the annual Solicitations and have significant potential for successful commercialization. The only eligible participants are small business concern (SBC) with 500 or fewer employees or a nonprofit research institute such as a university or a research laboratory with ties to an SBC. These programs are potential sources of seed funding for the development of small business innovations.

  16. Evolutionary analysis of technological innovations: the example of solar photovoltaic and wind energy

    International Nuclear Information System (INIS)

    Taillant, Pierre

    2005-01-01

    The objective of this research thesis is to study the building up and the development of technologies for renewable energies considered as environmental radical innovations. In a first part, the author discusses the systemic aspects of innovation and the environmental challenges associated with energy technologies. He examines the main evolutions of energy systems over a long period. In a second part, he addresses innovation incentives in the case of environmental technologies and within the frame of the neo-classical economic theory. The next parts aim at presenting the theoretical framework of the evolutionary analysis of innovation and technical change, and at applying it to the case of technological innovations for renewable energies (photovoltaic and wind energy). World PV market trends are discussed and the technological competition context of this sector is analysed. The evolution of the solar PV technological system in Germany is discussed, as well as the specific case of development of the wind energy technological system in Denmark

  17. The impact of innovative commercial technologies on students’ behaviour of an economic university

    Directory of Open Access Journals (Sweden)

    Laurentiu-Dan Anghel

    2015-05-01

    Full Text Available In a dynamic business environment, implementing innovative commercial technologies facilitates the winning of new competitive advantages in the retail industry, given the manifested influence on consumer buying behaviour towards commercial units, as well as the significant contribution to the development of modern shops image. This paper presents the attitude of students from the Bucharest University of Economic Studies towards the adoption of innovative retail technologies within hypermarkets in Romania, based on a selective marketing research, conducted on a sample of 359 students from undergraduate and master cycles. The main objectives focused on identifying: the image of certain instruments belonging to the innovative commercial technologies in terms of usefulness in the process of buying; the intention to use innovative commercial technologies; the perception of the main advantages and disadvantages of using innovative commercial technologies in the buying process; the importance of commercial technologies in relation to other attributes underlying the development of a hypermarket image. Research results show a relatively low level of awareness among buyers, due to a reduced exposure to innovative commercial technologies, but a relatively high availability of acceptance in the purchasing process. Thus, there is a favourable assessment of the utility of commercial instruments in the buying process and a relatively high intention of use. The paper also highlights the influence of innovative commercial technologies on store image and loyalty of buyers.

  18. Technological innovation and convergent journalism. Case study on the transformation process of Bavaria’s public broadcasting service

    Directory of Open Access Journals (Sweden)

    Klaus MEIER

    2017-01-01

    Full Text Available As a consequence of technological innovations and their social utilisation, media organisations and newsrooms are undergoing a fundamental transformation process. This article analyses the interrelations between technological innovations and the challenges of convergent journalism. Studies conducted on newsroom convergence to date set out from one-sided influences: They investigated the extent to which technical innovations determine the newsrooms, or whether journalistic structures and long-range trends are so strong as to largely obstruct the adoption of new technologies in journalism. Therefore technology — especially in studies carried out on newsroom convergence — is considered as an influencing factor on somehow resisting or non-resisting newsrooms. We broaden the scope of this investigation by considering that any such influence might not come exclusively from technology, but that impulses can come also from innovative newsrooms: technological gaps, wishes and obstacles are identified from the journalist's viewpoint and brought to the attention of the developers of newsroom technologies — on the basis of empirical research findings from a case study of Bavaria’s public broadcasting service, Bayerischer Rundfunk (BR. With its 5.000 employees, BR is one of Germany's largest media organisations. It is undergoing a fundamental and long-term convergence process. A variety of gaps, problems and wishes came to light from 25 in-depth interviews with journalists working on innovative projects. For example, criticism is expressed of complicated, partly unknown or non-existent networking of cross-media production systems. There is a desire for the increased use of consumer devices like smartphones in professional news production. There exists a creative potential for innovative solutions, but these are not comprehensively evaluated. To date, there has been no systematic implementation of the findings of innovative media projects in everyday

  19. Nuclear energy: The role of innovation. Vienna, 23 June 2003. Conference on innovative technologies for nuclear fuel cycles and nuclear power

    International Nuclear Information System (INIS)

    ElBaradei, M.

    2003-01-01

    month approved the Phase 1A report, and made a number of recommendations for moving forward, including the pursuit of case studies that would enable Member States and independent analysts to apply INPRO methodology in specific situations. But the Committee also recommended - as I have been encouraging for some time - that INPRO strengthen its co-operation with other initiatives on innovative nuclear energy systems, including the US-initiated Generation IV project. The results of INPRO's efforts to date will be presented later in this conference, as will the results of Generation IV and other projects. It is my hope that these presentations will make evident more opportunities for collaboration among these projects - collaboration that will be of mutual benefit to all concerned. Fourth, it should be emphasized that innovation efforts must be more than purely technical. The evaluation of new design aspects by the nuclear industry should be accompanied, throughout the nuclear community, by a re-evaluation of technology policy issues

  20. A Conceptual Framework for the Alignment of Innovation and Technology

    Directory of Open Access Journals (Sweden)

    René Pellissier

    2008-08-01

    Full Text Available Historically, business institutions base their growth strategies on their research and development (R&D function. This function is fairly established and sets out to acquire new knowledge in a systematic process of research in order to produce or improve products, services or processes. In fact, innovation and research are two of the main thrusts for economic growth. Research is planned, assessed, managed and rewarded, innovation is not. However, without acknowledging and aiding the growing importance of innovation for growth in a rapidly more chaotic environment, this function is set for failure. Where research is valued, innovation is feared as radical and disruptive. Furthermore, there is little evidence in the current body literature to link them and to show how they, jointly, can add more value than separately. They remain independent entities in separate clusters of the economy. The convergence factor in research and innovation is technology (knowledge not machines. The paper explores the convergence of innovation and research from a previous paper, focusing on the development of a conceptual model in terms of the technology (or knowledge system required for the accomplishment of this convergence. In this sense, technology is defined as knowledge, tacit or explicit, in human, document or electronic format. The proposed convergence requires the use of knowledge systems to drive the innovation and research. The contribution of the paper lies in the knowledge developmental aspects of research and innovation convergence. An existing model to achieve for knowledge systems development will be reviewed and a modified version presented after careful consideration of the body literature on knowledge and innovation systems. This model incorporates aspects of knowledge management as well as innovation and research management.

  1. Grounding the Innovation of Future Technologies

    Directory of Open Access Journals (Sweden)

    Antti Oulasvirta

    2005-01-01

    Full Text Available Mobile and ubiquitous technologies can potentially change the role of information and communication technology in human lives. Empirical, human-centered approaches are emerging as an alternative to technology-driven approaches in the innovation of these technologies. Three necessary empirical stages, intertwined with analytical ones and with each informing and grounding the succeeding stages, are analyzed. First, needfinding is utilized to discover societal and individual demands for technology. Second, observational and experimental studies examine the social and cognitive preconditions for interaction. From these two steps, a hypothesis is formulated regarding how technology will change existing practices. Finally, this hypothesis, embodied in the design of a prototype, is tested in a field trial. Four design cases illustrate the value of empirical grounding.

  2. Determinants of the Pace of Global Innovation in Energy Technologies

    Science.gov (United States)

    Kaur, Jasleen

    2013-01-01

    Understanding the factors driving innovation in energy technologies is of critical importance to mitigating climate change and addressing other energy-related global challenges. Low levels of innovation, measured in terms of energy patent filings, were noted in the 1980s and 90s as an issue of concern and were attributed to limited investment in public and private research and development (R&D). Here we build a comprehensive global database of energy patents covering the period 1970–2009, which is unique in its temporal and geographical scope. Analysis of the data reveals a recent, marked departure from historical trends. A sharp increase in rates of patenting has occurred over the last decade, particularly in renewable technologies, despite continued low levels of R&D funding. To solve the puzzle of fast innovation despite modest R&D increases, we develop a model that explains the nonlinear response observed in the empirical data of technological innovation to various types of investment. The model reveals a regular relationship between patents, R&D funding, and growing markets across technologies, and accurately predicts patenting rates at different stages of technological maturity and market development. We show quantitatively how growing markets have formed a vital complement to public R&D in driving innovative activity. These two forms of investment have each leveraged the effect of the other in driving patenting trends over long periods of time. PMID:24155867

  3. Utilizing technological innovations to enhance psychotherapy supervision, training, and outcomes.

    Science.gov (United States)

    Barnett, Jeffrey E

    2011-06-01

    Recent technological advances in the use of the Internet and video technologies has greatly impacted the provision of psychotherapy and other clinical services as well as how the training of psychotherapists may be conducted. When utilized appropriately these technologies may provide greater access to needed services to include treatment, consultation, supervision, and training. Specific ethical challenges and pitfalls are discussed and recommendations are made for the ethical use of these technologies. Additionally, innovative practices from the seven articles in the special section that follows are highlighted and reviewed. These articles present a number of innovations that can take psychotherapy training, research, supervision, and treatment forward toward increased effectiveness. Recommendations for integrating these innovations into ongoing practices are provided and for additional research to build on the important work of the authors in this special section are provided.

  4. Innovation capabilities in food and beverages and technology-based innovation projects

    NARCIS (Netherlands)

    Tepic, M.; Fortuin, F.T.J.M.; Kemp, R.G.M.; Omta, S.W.F.

    2014-01-01

    Purpose - The aim of this paper is to establish the differences between the food and beverages (F&B) and technology-based industries with regards to the relation between previously identified success factors and innovation project performance. Design/methodology/approach - These differences are

  5. Space Qualified Non-Destructive Evaluation and Structural Health Monitoring Technology, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — NextGen Aeronautics is proposing an innovative space qualified non-destructive evaluation and health monitoring technology. The technology is built on concepts...

  6. Resource recycling as new field for innovative technologies

    Directory of Open Access Journals (Sweden)

    Kamenik L.L.

    2017-01-01

    Full Text Available This study substantiates the necessity of transition from the natural resource model of socioeconomic development towards an industrially reproducible type of raw material, which is particularly relevant in the context of the global resource crisis. The key role of innovative technologies in the solution to this problem is questioned. Theoretical and methodological principles of the modern economy functioning are examined based on the resource factor. A new concept of “resource recycling”, which reflects industrial resource recovery, is introduced. An innovative model of a resource base for economic reproduction is provided, the necessity of transition from the existing linear economic model towards a closed resource cycle model is shown, and three resource cycle models are examined in terms of their objectives, forms, and content. The major problems in the implementation of the innovative model and ways of solving them are defined, which makes it possible to reduce the risk of a resource provision crisis. The conclusion that resource recycling serves as a new sphere of innovative technologies is substantiated. The historical analogy method and the evolutionary systems approach are used.

  7. Innovation in Construction: Learning Processes in implementing new Technologies

    DEFF Research Database (Denmark)

    Clausen, Lennie

    1999-01-01

    The article is concerned with the question: How do construction firms implement new technology on construction projects? A model of the implementation process is presented based on a review of the construction innovation literature, innovation theory, and organisational learning theories....

  8. Patterns of technological innovation and evolution in the energy sector: A patent-based approach

    International Nuclear Information System (INIS)

    Lee, Kyungpyo; Lee, Sungjoo

    2013-01-01

    Given the ever-increasing pace and complexity of technological innovation in the energy sector, monitoring technological changes has become of strategic importance. One of the most common techniques for technology monitoring is patent analysis, which enables the identification of technological trends over time. However, few previous studies have carried out patent analysis in the energy sector. This study aims to explore patterns of innovation and of evolution in energy technologies, particularly focusing on similarities and differences across technologies. For this purpose, we first defined the relevant energy technologies and extracted the associated patent data from the United States Patents and Trademark Office (USPTO) and then adopted six patent indices and developed six patent maps to analyze their innovation characteristics. We then clustered energy technologies with similar characteristics, so defining innovation categories, and analyzed the changes in these characteristics over time to define their evolution categories. As one of the few attempts to investigate the overall trends in the energy sector's innovation and evolution, this study is expected to help develop an in-depth understanding of the energy industry, which will be useful in establishing technology strategies and policy in this rapidly changing sector. - Highlights: • We examined the patterns of innovation and evolution of energy technologies. • Six types of innovation patterns such as “competitive” or “mature” were identified. • Six types of evolution patterns such as “towards closed innovation” were identified. • The patterns of evolution were related to the patterns of innovation

  9. Energy prices, technological knowledge and green energy innovation. A dynamic panel analysis of patent counts

    International Nuclear Information System (INIS)

    Kruse, Juergen; Wetzel, Heike; Koeln Univ.

    2014-01-01

    We examine the effect of energy prices and technological knowledge on innovation in green energy technologies. In doing so, we consider both demand-pull effects, which induce innovative activity by increasing the expected value of innovations, and technology-push effects, which drive innovative activity by extending the technological capability of an economy. Our analysis is conducted using patent data from the European Patent Office on a panel of 26 OECD countries over the period 1978-2009. Utilizing a dynamic count data model for panel data, we analyze 11 distinct green energy technologies. Our results indicate that the existing knowledge stock is a significant driver of green energy innovation for all technologies. Furthermore, the results suggest that energy prices have a positive impact on innovation for some but not all technologies and that the e.ect of energy prices and technological knowledge on green energy innovation becomes more pronounced after the Kyoto protocol agreement in 1997.

  10. Evaluation of innovation processes

    Directory of Open Access Journals (Sweden)

    Jakub Tabas

    2012-01-01

    Full Text Available In present, innovations are spoken as an engine of the world economy because the innovations are transforming not only business entities but the whole industries. The innovations have become a necessity for business entities in order to survive on floating challenging markets. This way, innovations are driving force of companies’ performance. The problem which arises here is a question of measurement innovation’s effect on the financial performance of company or selection between two or more possible variants of innovation’s realization. Various authors which are focused on innovations processes are divided into two groups in their attitudes towards the question of influence of innovations on financial performance of companies. One group of the authors present the idea that any reliable measurement is not possible or efficient. The second group of authors present some methods theoretically applicable on this measurement but they base their approaches mostly on the methods of measurement of investments effectiveness or they suggest employment of indicators or ratios which wouldn’t be clearly connected with the outcome of innovation process. The aim of submitted article is to compare different approaches to evaluation of the innovation processes. The authors compare various approaches here and by use of analysis and synthesis, they determine their own method how to measure outcome of innovation process.

  11. Simultaneous Versus Sequential Complementarity in the Adoption of Technological and Organizational Innovations

    DEFF Research Database (Denmark)

    Battisti, Giuliana; Rabbiosi, Larissa; Colombo, Massimo G.

    2015-01-01

    It is generally suggested that technological and organizational innovations, being complementary, need to be adopted simultaneously. Nevertheless, sequential rather than simultaneous adoption of these two types of innovation may be optimal. In this paper, we analyze the pattern of mutual causation...... of technological and organizational innovations and contribute to the understanding of their interdependencies......

  12. ResonantSonic drilling. Innovative technology summary report

    International Nuclear Information System (INIS)

    1995-04-01

    The technology of ResonantSonic drilling is described. This technique has been demonstrated and deployed as an innovative tool to access the subsurface for installation of monitoring and/or remediation wells and for collection of subsurface materials for environmental restoration applications. The technology uses no drilling fluids, is safe and can be used to drill slant holes

  13. 2010 Strategic national plan of Science Technology and Innovation PENCTI

    International Nuclear Information System (INIS)

    2010-07-01

    The document presents the national strategic plan for Science Technology and Innovation, its history, premises, conceptual framework, the starting situation, guiding principles, strategic objectives and priority area such as new energy sources to diversify the national energy matrix, environment environment and preservation of natural resources, governance and private management with increasing levels of dependency with the development of strategic technology knowledge and innovation

  14. Competition and innovation in a technology setting software duopoly

    DEFF Research Database (Denmark)

    Bitzer, Jürgen; Schröder, Philipp

    2003-01-01

    the assumption that software producers compete in technology rather than price or quantities. The model includes the presence of technological progress and menu costs of adjusting existing software, i.e. innovation. It is found that: (i) moving from monopoly to duopoly does increase the technology level set......Recently the software industry has experienced fundamental changes in market structure through the entry of open source competitors, e.g. Linux's entry into the operating systems market. In a simple model we examine the effects of such a change in market structure from monopoly to duopoly under...... by firms in the software industry; (ii) a duopoly adjusts more readily to global technological progress than a monopolist. Furthermore, results are presented comparing open source versus for-profit firms in terms of technology levels and innovation....

  15. The rise and fall of self-service in Amsterdam trams: User technology relations in a case of service innovation

    NARCIS (Netherlands)

    Nahuis, Roel

    2009-01-01

    The stabilisation of innovative technology depends on reconciling technological opportunities and user behaviour. This can be achieved by adjusting the technology to the users, by configuring the user, or by a combination thereof. This paper evaluates different strategies in a case of service

  16. Business models for maximising the diffusion of technological innovations for climate-smart agriculture

    NARCIS (Netherlands)

    Long, Thomas B.; Blok, Vincent; Poldner, Kim

    2017-01-01

    Technological innovations will play a prominent role in the transition to climate-smart agriculture (CSA). However, CSA technological innovation diffusion is subject to socio-economic barriers. The success of innovations is partly dependent on the business models that are used to diffuse them.

  17. The formalization of innovative processes of food technology equipment

    Directory of Open Access Journals (Sweden)

    V. A. Panfilov

    2016-01-01

    Full Text Available Improving the efficiency of scientific and engineering work to develop methods for converting agricultural raw materials into food is the most important condition of output processing and food sectors of agriculture in the sixth technological structure. The purpose of this article is to formalize the process of creating a progressive technique of food technologies. The process of self-organizing technological systems, presents a model of dual mechanism of control with regard to the processes of food technology. It is shown that in the process of adaptation development of the technological system as purposefully improving the structure and functioning of the system: increases the efficiency of interaction with the external environment. This smoothed out the contradictions of the technological system and its the main thing, the main technical contradiction: «productivity – quality». The steps to be taken to ensure that the technological system of conditions for intensive development. It is concluded that the potential development of some technological systems is hidden in the perspective of automation, and others – is associated with adaptive development processes, in particular machines, devices and bioreactors. The paper shows that innovative and truly breakthrough developments leading to the creation of fundamentally new equipment and new generations of technological systems, possible only with the establishment of patterns of organization, structure, functioning and development of open systems, which are modern technologies of agriculture. The mechanism of control of technological object acts as a core of adaptive development, which implements the anti-entropic entity management object, formalizing the innovation process of innovative food processing technologies.

  18. Innovations in food technology for health.

    Science.gov (United States)

    Hsieh, Yun-Hwa Peggy; Ofori, Jack Appiah

    2007-01-01

    Modern nutritional science is providing ever more information on the functions and mechanisms of specific food components in health promotion and/or disease prevention. In response to demands from increasingly health conscious consumers, the global trend is for food industries to translate nutritional information into consumer reality by developing food products that provide not only superior sensory appeal but also nutritional and health benefits. Today's busy life styles are also driving the development of healthy convenience foods. Recent innovations in food technologies have led to the use of many traditional technologies, such as fermentation, extraction, encapsulation, fat replacement, and enzyme technology, to produce new health food ingredients, reduce or remove undesirable food components, add specific nutrient or functional ingredients, modify food compositions, mask undesirable flavors or stabilize ingredients. Modern biotechnology has even revolutionized the way foods are created. Recent discoveries in gene science are making it possible to manipulate the components in natural foods. In combination with biofermentation, desirable natural compounds can now be produced in large amounts at a low cost and with little environmental impact. Nanotechnology is also beginning to find potential applications in the area of food and agriculture. Although the use of new technologies in the production of health foods is often a cause for concern, the possibility that innovative food technology will allow us to produce a wide variety of food with enhanced flavor and texture, while at the same time conferring multiple health benefits on the consumer, is very exciting.

  19. Harvesting Adaptation to Biodiversity Conservation in Sawmill Industry: Technology Innovation and Monitoring Program

    Directory of Open Access Journals (Sweden)

    Guillermo J. Martínez Pastur

    2007-09-01

    Full Text Available Social demands related to native forest ecosystems are based on an efficient management, with a balance between conservation and timber production. This paper describes the industry adaptation to a biodiversity program with an alternative regeneration method. The proposed method leaves 30% of the timber-quality forest as aggregated retention and 15 m² ha-1 basal area as dispersed retention. While many costs increased considerably, the incomes also may increase by applying new management strategies and technology innovation. A monitoring program was established in the harvested stands to evaluate the ecological functionality of the applied regeneration system (forest structure, climate change, regeneration dynamics, habitat quality and abiotic cycles. The implementation of an innovated technology and monitoring program in the forest and industry determined a balance between economic values and biodiversity conservation.

  20. UK innovation systems for new and renewable energy technologies: drivers, barriers and systems failures

    International Nuclear Information System (INIS)

    Foxon, T.J.; Gross, R.; Chase, A.; Howes, J.; Arnall, A.; Anderson, D.

    2005-01-01

    A better understanding of the systemic processes by which innovation occurs is useful, both conceptually and to inform policy-making in support of innovation in more sustainable technologies. This paper analyses current innovation systems in the UK for a range of new and renewable energy technologies, and generates policy recommendations for improving the effectiveness of these innovation systems. Although incentives are in place in the UK to encourage innovation in these technologies, system failures - or 'gaps' - are identified in moving technologies along the innovation chain, preventing their successful commercialisation. Sustained investment will be needed for these technologies to achieve their potential. It is argued that a stable and consistent policy framework is required to help create the conditions for this. In particular, such a framework should be aimed at improving risk/reward ratios for demonstration and pre-commercial stage technologies. This would enhance positive expectations, stimulate learning effects leading to cost reductions, and increase the likelihood of successful commercialisation

  1. Influences of Government Championship on the Technology Innovation Process at the Project-level

    Science.gov (United States)

    Yue, Xin

    Government support is a popular instrument to foster technology innovation. It can take various forms such as financial aid, tax credits, and technological assistance. Along with the firm characteristics, strategic behavior of the project team, characteristics of the technology and the market, and the regulatory environment, government support influences firms' research and development (R&D) motivations, decision making process, and hence technology development performance. How government support influences the performance in different industries is an important policy and research question. There are many studies on the effectiveness and impacts of government support, mostly at program-level or industry-level. Government Championship is a form of government support distinct from direct financial or technological assistance. Championship includes expressing confidence in the innovation, encouraging others to support the innovation, and persisting under adversity. Championship has been studied as a critical inside factor for innovation success, particularly at project-level. Usually a champion emerged within the organization responsible for the innovation project. However, with the intention to encourage technology development, governments can also play a championship role. Government championship, besides government financial and technological assistance (hereafter "government F&T"), could be one major category of government support to facilitate high-technology innovation. However, there are few studies focusing on the effectiveness of government championship, and how it influences the innovation process. This thesis addresses this question through two studies on high-technology development projects. The first study has tested the effectiveness of government championship on the performance of 431 government sponsored technology innovation projects. Government championship and government F&T, as well as project team strategic behavior, are hypothesized to influence

  2. Barriers and Facilitators of Collaborative Management in Technological Innovation Projects

    Directory of Open Access Journals (Sweden)

    Sonia Regina Hierro Parolin

    2013-05-01

    Full Text Available Discussions about innovation tend to a more systemic and cooperative approach in which those networks focused on scientific and technological development are considered. This article aims to identify the barriers and facilitators in the collaborative management process of technological innovation projects and a study has been carried out by the cooperation action for innovation with 17 industries in Brazil. The primary evidence refers to the crucial role of project managers when leading the structural demands, and clarity on the relevance of the communication of strategic guidelines among the organizations involved for the achievement of the results in the industries.

  3. Adding Entrepreneurship to India’s Science, Technology & Innovation Policy

    Directory of Open Access Journals (Sweden)

    Ragini Chaurasia

    2016-06-01

    Full Text Available Science, Technology & Innovation Policy (STIP is an important policy instrument particularly in the developing countries. India also has recognized the role of science, technology and innovation in development as early as 1958 but still trails behind its peer Brazil, China and the Asian tiger Singapore. Considering strong correlation between research and development investment and growth based on existing studies, this paper brings forth the present situation of India in investment and its influence on the performance of the economy vis-à-vis the three countries. This paper studies the STIP 2013 in detail and reports the contribution of the Department of Science and Technology in India. The main conclusion of this paper is the recommendation for incorporation of “entrepreneurship” in STIP based on global best practices, which can be achieved by government’s involvement as a venture capitalist to seed and support innovations, increasing transparency and incorporating entrepreneurial curriculum.

  4. An innovation diffusion model for new mobile technologies acceptance

    Directory of Open Access Journals (Sweden)

    Barkoczia Nadi

    2017-01-01

    Full Text Available This paper aims to approach the diffusion model developed in 1960 by Frank Bass has been utilized to study the distribution of different types of new products and services. The Bass Model helps by describing the process in which new products are adopted in a market. This model is a useful tool for predicting the first purchase of an innovative product for which there are competing alternatives on the market. It also provides the innovator with information regarding the size of customers and the adoption time for the product. The second part of the paper is dedicated to a monographic study of specific conceptual correlations between the diffusion of technology and marketing management that emphasizes technological uncertainty and market uncertainty as major risks to innovative projects. In the final section, the results of empirical research conducted in Baia-Mare, Romania will be presented in a way that uses diffusion Bass model to estimate the adoption period for new mobile technologies.

  5. The Mediating Role of Knowledge Sharing on Information Technology and Innovation

    Directory of Open Access Journals (Sweden)

    Onwika Kaewchur

    2013-12-01

    Full Text Available This study aims to investigate the relationship between information technology, knowledge sharing, and a firm’s innovation. Knowledge sharing as a mediating effect is also simultaneously investigated with regard to the relationship between information technology and a firm’s innovation. In this research, the quantitative method was mainly employed. The data was collected with a survey. A total of 224 respondents from herbal manufacturing companies were included in the research. The results presented in this paper demonstrate that knowledge sharing and information technology can critically influence the organization’s innovation and can play a vital role as a significant success factor in this process.

  6. Global Positioning Radiometric Scanner System. Innovative Technology Summary Report

    International Nuclear Information System (INIS)

    2001-01-01

    The US DOE continually seeks safer and more cost-effective technologies for use in decontamination and decommissioning (D and D) of nuclear facilities. To this end, the Deactivation and Decommissioning Focus Area (DDFA) of the DOE OST sponsors the Large Scale Demonstration and Deployment Projects (LSDDP). At these LSDDPs, developers and vendors of improved or innovative technologies showcase products that are potentially beneficial to the DOE projects and to others in the D and D community. Benefits sought include decreased health and safety risks to personnel and the environment, increased productivity, and decreased costs of operation. The Idaho National Engineering and Environmental Laboratory (INEEL) LSDDP generated a list of statements defining specific needs or problems where improved technology could be incorporated into ongoing D and D tasks. One of the stated needs was for developing technologies that would reduce costs and shorten DDOE/EM--0552DOE/EM--0552 and D schedules by providing radiological characterizations to meet the free-release criteria. The Global Positioning Radiometric Scanner (GPRS system shown in Figure 1) utilizes a detection system; a portable computer, a differential global positioning system (d-gps), and a four wheel drive vehicle. Once the survey data has been collected, a software program called GeoSofttrademark generates a graphical representation of the radiological contamination extent. Baseline technology involves gridding the area and hand surveying each grid. This demonstration investigated the associated costs and the required time to evaluate the radiological characterization data from the GPRS with respect to the baseline technology. The GPRS system performs in-situ, real-time analyses to identify the extent of radiological contamination. Benefits expected from using the new innovative technology (GPRS) include: Reduced labor hours associated with performing the survey; Increased number of survey data points; Reduced

  7. An Eco-Design and Innovation Feasibility Study of Low-Carbon Illumination Technologies for the Tertiary Sector in Denmark

    DEFF Research Database (Denmark)

    Bjarklev, Araceli

    objective is to contribute by discussing the elements that a new framework for eco-design and innovation feasibility studies could provide to the evaluation of technologies that will facilitate a response to the climate, energy and economic development challenges the illumination sector in Denmark faces......This thesis presents an eco-design and innovation feasibility study that focuses on the Danish lighting sector. The main general research objective is: To identify possibilities for further innovations that can contribute to reducing CO2 emissions and reduce the use of fossil fuels. An integrated...... today. To achieve these goals, this study integrates three different levels of systemic analysis: Firstly, the product system analysis, where technological possibilities to improve energy efficiency are discussed and new technological improvements identified. Secondly, it takes into consideration...

  8. Pathways to Inclusive Development through Innovation, Technology ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Technology and innovation can drive economic growth, help solve social and ... capacities within developing countries to create inclusive growth and poverty ... science, population and public health, and health systems research relevant to the ...

  9. Technological Innovations from NASA

    Science.gov (United States)

    Pellis, Neal R.

    2006-01-01

    The challenge of human space exploration places demands on technology that push concepts and development to the leading edge. In biotechnology and biomedical equipment development, NASA science has been the seed for numerous innovations, many of which are in the commercial arena. The biotechnology effort has led to rational drug design, analytical equipment, and cell culture and tissue engineering strategies. Biomedical research and development has resulted in medical devices that enable diagnosis and treatment advances. NASA Biomedical developments are exemplified in the new laser light scattering analysis for cataracts, the axial flow left ventricular-assist device, non contact electrocardiography, and the guidance system for LASIK surgery. Many more developments are in progress. NASA will continue to advance technologies, incorporating new approaches from basic and applied research, nanotechnology, computational modeling, and database analyses.

  10. Technological Innovation Management and its Role in Performance of Organizations

    Directory of Open Access Journals (Sweden)

    Laura-Diana Radu

    2012-10-01

    Full Text Available This paper aims to identify the main benefits of technological innovation in organizations and how it should be managed to ensure economic efficiency. The current level of social and economic evolution was possible only through active involvement of individuals and organizations in the innovative process. Adoption of appropriate policies and strategies at institutional, national and international level has significant impact on both the innovation process and innovation results. At company level, involvement in an innovative process depends on the financial and human resources and on the availability and interest of management and employees. The main motivating factor in adoption of technological innovation is, most often, obtaining financial benefits. This reflects itself either as a direct increase in profits, or by obtaining competitive advantage which leads, in the long run, to profits increase and achieving a favorable position on the market. Should not be neglected other motivating factors of innovation, such as compliance with environmental standards, ensuring a secure position on the market with opportunities for further expansion, reducing the cost of raw materials and / or production process, improving company image, attitude and achievements of partners in the field (competitors, suppliers, customers etc. Managers need to carefully analyze these factors and decide the manner and degree of involvement in an innovative process.

  11. Holding a candle to innovation in concentrating solar power technologies: A study drawing on patent data

    International Nuclear Information System (INIS)

    Braun, Frauke G.; Hooper, Elizabeth; Wand, Robert; Zloczysti, Petra

    2011-01-01

    Improved understanding of the innovative pathways of renewable energy technologies is vital if we are to make the transition to a low carbon economy. This study presents new evidence on innovation and industry dynamics in concentrating solar power (CSP) technologies. Though CSP is undergoing a renaissance, existing innovation studies have explored innovative activity in solar technologies in general, ignoring the major differences between solar photovoltaic and CSP technologies. This study, based on patent data, examines the level and dynamics of innovative activity in CSP between 1978 and 2004. Our unique contribution, based on engineering expertise and detailed datawork, is a classification system mapping CSP technologies to the International Patent Classification (IPC) system. The innovation performance of CSP is found to be surprisingly weak compared to the patent boom in other green technologies. Performance was strong around 1980 before falling dramatically, and has only recently begun to show signs of recovery. Innovation and R and D are concentrated in high-tech countries; the US, Germany and Japan, which do not necessarily have high domestic CSP potential. Large CSP potential is, therefore, not a sufficient condition for innovation. Innovators must possess economic and scientific capabilities. - Research highlights: → We develop a new classification system which allows us to map innovation in CSP technologies to the International Patent Classification System. → Evidence of innovation patterns in concentrating solar power technologies is presented. → Innovation performance in CSP is surprisingly weak compared to patenting in other green technologies, despite its strong potential as a low carbon power generation technology.

  12. Research on the Mode of Technology Innovation Alliance of the New Material Industry in Hunan Province

    Science.gov (United States)

    Wang, Fan

    2018-03-01

    One of the main directions of technology development in the 21st century is the development and application of new materials, and the key to the development of the new material industry lies in the industrial technology innovation. The gross scale of the new material industry in Hunan Province ranks the first array in China. Based on the present situation of Hunan’s new material industry, three modes of technology innovation alliance are put forward in this paper, namely the government-driven mode, the research-driven and the market-oriented mode. The government-driven mode is applicable to the major technology innovation fields with uncertain market prospect, high risk of innovation and government’s direct or indirect intervention;the research-driven mode is applicable to the key technology innovation fields with a high technology content; and the market-oriented mode is applicable to the general innovation fields in which enterprises have demands for technology innovation but such innovation must be achieved via cooperative research and development.

  13. In the Shadow of Schumpeter: W. Rupert Maclaurin and the Study of Technological Innovation

    Science.gov (United States)

    Godin, Benoit

    2008-01-01

    J. Schumpeter is a key figure, even a seminal one, on technological innovation. Most economists who study technological innovation refer to Schumpeter and his pioneering role in introducing innovation into economic studies. However, despite having brought forth the concept of innovation in economic theory, Schumpeter provided few if any analyses…

  14. A boom in energy technology innovation despite decades of stagnant investment

    Energy Technology Data Exchange (ETDEWEB)

    Bettencourt, Luis M [Los Alamos National Laboratory; Trancik, Jessika A [SANTA FE INSTITUTE; Kaur, Jasleen [INDIANA UNIV

    2009-01-01

    Rates of patenting in energy technologies in the United States stagnated during a period of low federal investment in the sector from the mid-1980's through 2000. To analyze the current state of the field, we built a new comprehensive database of energy patents in the USA and worldwide aggregated by nation and technology. We show that innovation in energy technologies, as measured by numbers of new patents, has grown dramatically over the last decade both for renewable and fossil fuel-based technologies, but that traditional investment -government and private support for research and development (R&D) -has not risen commensurately. We also show that while venture capital investment in the sector has increased significantly in the last few years it lags the observed uptick in patenting. We find increasing patenting rates in nations worldwide but also differences in regional priorities, as well as a marked divergence in innovation rates across technologies. Renewable energy technologies - especially solar and wind - currently show the fastest rates of innovation, while patenting levels in nuclear fission have remained low despite relatively high levels of sustained investment. While this sharp increase of innovative activity bodes well for change in the energy sector, the future of emerging technologies may hinge on sustained investment in R&D and favorable incentives for market entry.

  15. Sources of innovation in agricultural technology

    Energy Technology Data Exchange (ETDEWEB)

    Biggs, S D; Clay, E J

    1981-04-01

    This paper focuses attention on environmental and biological characteristics of agriculture which shape the process of technical innovation. The interaction of natural selection and human purposive selection and experimentation is shown to result in a continuous process of innovation placing farmers in the informal R and D systems as well as scientists in formal R and D systems in an innovative treadmill. The importance and limitations of informal R and D are reviewed. A discussion of the characteristics and potential of formal R and D systems leads to the identification of some major problems of policy inherent in, and specific to, the organization and management of agricultural research resources. These include: genetic vulnerability, choices between environmentally specific or widely adapted technologies, the location of research activity, the linkages between agricultural producers and scientists, and methods for maintaining and strengthening informal R and D systems. 58 references, 2 figures.

  16. Examination of the bases for proposed innovations in reactor safety technology

    International Nuclear Information System (INIS)

    Moses, D.L.

    1986-01-01

    This paper employs the criteria for evaluations from the Nuclear Power Option Viability Study to examine the bases for proposed innovations in light water reactor safety technology. These bases for innovation fall into four broad categories as follows: (1) virtually exclusive reliance on passive safety features to preclude core damage in all situations, (2) design simplification using some passive safety features to reduce the frequency of core damage to less than about 10 -6 per reactor-year, (3) passive containment to preclude releases from any accident, and (4) designing to limit licensing attention to one or at least a few systems. Of these, only the first two, and perhaps only the second, hold significant promise for providing for the viability of advanced light water reactors

  17. Technological Determinism and Permissionless Innovation as Technocratic Governing Mentalities: Psychocultural Barriers to the Democratization of Technology

    Directory of Open Access Journals (Sweden)

    Taylor Dotson

    2015-12-01

    Full Text Available Despite no shortage of thoughtful analysis concerning how to more democratically develop and assess new technologies, practical progress toward democratized innovation has been paltry. This state of affairs suggests that the barriers to such democratic ends merit more attention. Building upon calls to more seriously examine citizens’ understandings of technology as autonomous or deterministic, this paper characterizes the assumptions, beliefs, and patterns of thought undergirding technological determinism and permissionless innovation as technocratic governing mentalities. That is, they contribute to the biasing of political discourses, practices, and organizations toward non-decision making and adaptation with regards to technological change. Indeed, permissionless innovation is quickly becoming the motto of those aiming to legitimate a “hands-off” approach to the sociotechnical “disruptions” sought by Silicon Valley entrepreneurs. Moreover, this paper explores how STS, as both an academic and political endeavor, might better respond to the challenges these modes of thinking present. Drawing upon relevant work within social psychology and communications, several fruitful avenues for engaged research regarding undermining technocratic governing mentalities become apparent. Not only is there a pressing need for accessible and parsimonious counternarratives to technological determinism and permissionless innovation but also rhetorical strategies for making the democratization of technological appear continuous with aspects of status quo systems. Finally, given that technocratic governing mentalities are likely to have practical and material roots, inquiry should be directed toward understanding how different sociotechnical arrangements impact citizens’ perception of the desirability and feasibility of democratizing technology.

  18. ENVIRONMENTAL AND SUSTAINABLE TECHNOLOGY EVALUATION: BIOMASS CO-FIRING IN INDUSTRIAL BOILERS--UNIVERSITY OF IOWA

    Science.gov (United States)

    The U.S. EPA operates the Environmental and Sustainable Technology Evaluation (ESTE) program to facilitate the deployment of innovative technologies through performance verification and information dissemination. This ESTE project involved evaluation of co-firing common woody bio...

  19. Delivering construction projects using innovative building technologies

    CSIR Research Space (South Africa)

    Ampofo-Anti, Naalamkai

    2017-07-01

    Full Text Available . Figure 1: IBT delivery flowchart Proceedings 11th Built Environment Conference 6 th August – 8 th August 2017 Delivering construction projects using innovative building technologies Durban, South Africa 5. REFERENCES Ampofo-Anti, N...

  20. The Process of Accepting Technology Innovation for Rural Teachers

    Science.gov (United States)

    Cerovski, Jeremy

    2016-01-01

    In order for educational leaders to facilitate effectively the integration of technology, an understanding of the process rural teachers experience with technology integration is critical. The goal of the qualitative study was to discover and understand rural teachers' process for accepting technology innovation in order to improve the…

  1. Technological innovations and the rise of social inequalities in health.

    Science.gov (United States)

    Weiss, Daniel; Eikemo, Terje Andreas

    2017-11-01

    Social inequalities in health have been categorised as a human-rights issue that requires action. Unfortunately, these inequalities are on the rise in many countries, including welfare states. Various theories have been offered to explain the persistence (and rise) of these inequalities over time, including the social determinants of health and fundamental cause theory. Interestingly, the rise of modern social inequalities in health has come at a time of great technological innovation. This article addresses whether these technological innovations are significantly influencing the persistence of modern social inequalities in health. A theoretical argument is offered for this potential connection and is discussed alongside the typical social determinants of health perspective and the increasingly popular fundamental cause perspective. This is followed by a proposed research agenda for further investigation of the potential role that technological innovations may play in influencing social inequalities in health.

  2. Technology Innovation of Power Transmission Gearing in Aviation

    Science.gov (United States)

    Handschuh, Robert F.

    2009-01-01

    An overview of rotary wing evolution and innovations over the last 20 years was presented. This overview is provided from a drive system perspective. Examples of technology innovations that have changed and advanced drive systems of rotary wing vehicles will be provided. These innovations include full 6-axis CNC gear manufacture, face gear development to aerospace standards, health and usage monitoring, and gear geometry and bearing improvements. Also, an overview of current state-of-the-art activities being conducted at NASA Glenn is presented with a short look to fixed and rotary wing aircraft and systems needed for the future.

  3. Technological innovation applied to walmart and tesco’s supply chain

    OpenAIRE

    Heller, Fabiano

    2017-01-01

    This paper aims to analyze technological innovation applied to retailing supply chain. The research consisted of a brief overview of the state of current technologies and their development throughout time, as well as recent trials and perspectives of advancements for the future. Further, an analysis of two specific retailers – Walmart and Tesco – was performed to identify and address where such innovations are being applied in real scenarios, ultimately revealing opportunities for a streamlin...

  4. The importance of technological innovation in the logistics of ethanol exports

    Directory of Open Access Journals (Sweden)

    José Petraglia

    2011-07-01

    Full Text Available This paper analyzes the technological status of the bulk liquids logistical process at the port of Santos. The main objective is to identify problems encountered in port logistics for the export of ethanol and evaluate their respective technological innovation perspectives. Ethanol exports have increased given international environmental appeals. Within the complex and uncertain environments that contemporary corporations are experiencing, environmental issues have captured global attention. There is an awareness as to the relevance of reducing pollutant emissions to the atmosphere and one of the manners of so doing is by utilising ethanol as a source of propulsion energy fuelling automobile engines. Brazil is one of largest, high quality, ethanol producers in the world and a strong competitor to serve the global market given that the quality of the port logistic infrastructure poses significant impact on exports. Thus, this article proposes to further deepen the theory fundamentals alongside research conducted at companies of South-central Brazil´s sugar alcohol supply chain sector. The study´s analytical model is based on bibliographical research, monitoring and descriptive field surveys at companies within the segment. The article demonstrates that although the logistical process is evolving technologically, further investments in logistic infrastructure is required so as to obtain a sustainable competitive advantage and ensure the feasibility of exports of the Brazilian product.Key words: logistic process, technological innovation and ethanol.

  5. Innovation in industry and the diffusion of technology.

    Science.gov (United States)

    Utterback, J M

    1974-02-15

    The varied definitions used in the sources that have been discussed make any aggregate analysis difficult. A simple three-stage analysis of flows to, from, and within the firm was used to facilitate comparisons. Even so, each of the generalizations is drawn from relatively small and unrepresentative samples. Case studies may continue to be a source of ideas and hypotheses for further research, but do not appear to offer a means for deeper understanding of the innovation process. The retrospective nature of nearly all of the sources discussed probably means that the process has been viewed as much more rational and well-ordered than it is in fact. This failing is partially overcome in firsthand accounts such as those of Suites and Bueche (63) and Frey and Goldman (64). Each of these accounts involves a successful innovation according to technical or commercial criteria, or both. However, many of the characteristics of innovations that have failed commercially (10) appear to be similar to those of successful cases. The few longitudinal studies, and studies comparing more and less successful cases, do support the main conclusions drawn above (10, 32, 38). More serious problems are raised by the distinctly nonrepresentative nature of the samples used. There are few cases (17, 33, 65) in which the contributions of more than one organization, or details of interactions over a significant period of time, are discussed. There is a wide variation in the importance of the innovations included, ranging from those affecting the economy as a whole to cases involving production in a single firm, albeit with significant commercial results (66). In addition to questions of comparability and sampling, a central problem for further research on innovation will be to devise an operational model to account for interfirm and interindustry differences. Polar definitions used in past studies, "high technology" and "mature industry," for example, are insufficient. One possibility is to use

  6. Coordinating Leader-Follower Supply Chain with Sustainable Green Technology Innovation on Their Fairness Concerns.

    Science.gov (United States)

    Du, Bisheng; Liu, Qing; Li, Guiping

    2017-11-08

    Sustainable green technology innovation is essential in all the stages of the supply chain development. The members of the supply chain in each stage need to invest in sustainable green technology innovation research and development. However, whether the sustainable green technology innovation investments and profits for all the members are fairness concerned is a critical factor to motivate the supply chain members. Motivated by a real business investigation, in this study, a supply chain model with one supplier and one manufacturer is analyzed. We consider fairness concerns for the supplier and the manufacturer with sustainable green technology innovation development. We derive the optimal results in both with and without fairness concern. The results indicate that fairness concerns can promote and coordinate the supply chain members without advantage inequity averseness, to invest more on their sustainable green technology innovation development.

  7. Innovative technologies for groundwater cleanup

    International Nuclear Information System (INIS)

    Yow, J.L. Jr.

    1992-09-01

    These notes provide a broad overview of current developments in innovative technologies for groundwater cleanup. In this context, groundwater cleanup technologies include site remediation methods that deal with contaminants in ground water or that may move from the vadose zone into ground water. This discussion attempts to emphasize approaches that may be able to achieve significant improvements in groundwater cleanup cost or effectiveness. However, since data for quantitative performance and cost comparisons of new cleanup methods are scarce, preliminary comparisons must be based on the scientific approach used by each method and on the site-specific technical challenges presented by each groundwater contamination situation. A large number of technical alternatives that are now in research, development, and testing can be categorized by the scientific phenomena that they employ and by the site contamination situations that they treat. After reviewing a representative selection of these technologies, one of the new technologies, the Microbial Filter method, is discussed in more detail to highlight a promising in situ groundwater cleanup technology that is now being readied for field testing

  8. Innovative technologies for soil cleanup

    International Nuclear Information System (INIS)

    Yow, J.L. Jr.

    1992-09-01

    These notes provide a broad overview of current developments in innovative technologies for soil cleanup. In this context, soil cleanup technologies include site remediation methods that deal primarily with the vadose zone and with relatively shallow, near-surface contamination of soil or rock materials. This discussion attempts to emphasize approaches that may be able to achieve significant improvements in soil cleanup cost or effectiveness. However, since data for quantitative performance and cost comparisons of new cleanup methods are scarce, preliminary comparisons must be based on the scientific approach used by each method and on the sits-specific technical challenges presented by each sold contamination situation. A large number of technical alternatives that are now in research, development, and testing can be categorized by the scientific phenomena that they employ and by the site contamination situations that they treat. After cataloging a representative selection of these technologies, one of the new technologies, Dynamic Underground Stripping, is discussed in more detail to highlight a promising soil cleanup technology that is now being field tested

  9. Innovations in precision seed drilling technology: successes or failures?

    Directory of Open Access Journals (Sweden)

    Johannes Benninger

    2016-06-01

    Full Text Available In view of the development of various technological alternatives in precision seed drilling, it has become a matter of research whether there are clear criteria for the success or failure of technological innovations. Around the turn to the 20th century, two very different precision seed drill methods were developed almost at the same time. Band seeding made it possible to achieve nearly perfect single grain sowing. For this purpose, individual, equally spaced seeds were embedded into bands of paper or cotton. In the field, these seed tapes were then unreeled from large drums. The pneumatic system proposed in 1897, by contrast, introduced grain singling using a vacuum for the first time. Although band seeding presented a satisfactory technological solution, it was never widely applied. Pneumatic systems, on the other hand, took long to catch on and only started to be successful in the late 1960s. Up to then, these innovative systems had to be considered as failures. Changing the period under review, however, may completely reverse the assessment of whether an innovation is a success or a failure.

  10. Emerging technologies, innovative teachers and moral cohesion

    CSIR Research Space (South Africa)

    Batchelor, J

    2012-05-01

    Full Text Available efficacy when they engage with emerging technologies. The concept of moral cohesion is further expanded and forms the main focus of this article. Keywords: emerging technologies, innovative teachers, moral cohesion, pedagogies, ethics, teacher.... African Renaissance and teacher disposition is identified as the strongest drivers. Teacher training forms the link between the strong drivers and the outcomes manifest as Stewardship and ethical considerations. 3.2 Professional Burden The theme...

  11. H.E. Mr Ronaldo Mota Sardenberg, Minister for Science, Technology and Innovation, Brazil

    CERN Multimedia

    Maximilien Brice

    2002-01-01

    Photo 01: At the ATLAS assembly hall H.E. Mr Ronaldo Mota Sardenberg, Minister for Science, Technology and Innovation, Brazil (centre) with C. Melo (left) and P. Jenni Photo 02: At the ATLAS assembly hall H.E. Mr Ronaldo Mota Sardenberg, Minister for Science, Technology and Innovation, Brazil (centre) with C. Melo (left) and P. Jenni. Photo 03: At the ATLAS assembly hall H.E. Mr Ronaldo Mota Sardenberg, Minister for Science, Technology and Innovation, Brazil (second from right) with R. Salmeron, C. Melo, A. Dos Anjos and H. Pessoa Lima Junior. Photo 05: At the ATLAS assembly hall H.E. Mr Ronaldo Mota Sardenberg, Minister for Science, Technology and Innovation, Brazil (second from left) with, from left to right C. Melo, R. Salmeron, P. Jenni. Photo 06: At the ATLAS assembly hall H.E. Mr Ronaldo Mota Sardenberg, Minister for Science, Technology and Innovation, Brazil (left) with C. Melo. Behind, J. Ellis and J.A. Rubiol. Photo 07: At the ATLAS assembly hall H.E. Mr Ronaldo Mota Sardenberg, Minister for Science,...

  12. Technological innovations in forensic genetics: social, legal and ethical aspects.

    Science.gov (United States)

    Wienroth, Matthias; Morling, Niels; Williams, Robin

    2014-01-01

    This paper discusses the nature of four waves of technological innovations in forensic genetics alongside the social, legal and ethical aspect of these innovations. It emphasises the way in which technological advances and their socio-legal frameworks are co-produced, shaping technology expectations, social identities, and legal institutions. It also considers how imagined and actual uses of forensic genetic technologies are entangled with assertions about social order, affirmations of common values and civil rights, and promises about security and justice. Our comments seek to encourage the participation of scientific actors in the development of anticipatory governance deliberations concerning the widening application of forensic genetics in an increasing number of criminal and civil jurisdictions.

  13. Evaluation of the US Department of Energy Weatherization Innovation Pilot Program (2010-2014)

    Energy Technology Data Exchange (ETDEWEB)

    Tonn, Bruce Edward [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Rose, Erin M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Hawkins, Beth A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2017-05-01

    This report contains results from analysis conducted on each of the Weatherization Innovation Pilot Program (WIPP) grants awarded to 16 organizations by the US Department of Energy (DOE) in 2010. The purpose of WIPP was to explore the potential adoptability or replicability of innovative processes or technologies for the enhancement of DOE’s Weatherization Assistance Program (WAP). DOE initiated the WIPP grant to accelerate effective innovations in home energy efficiency and other WAP mission-related goals for income-qualifying households of low socioeconomic status. This study was performed alongside a broader, national evaluation of WAP conducted by Oak Ridge National Laboratory (ORNL) for DOE.

  14. Are Technology Interruptions Impacting Your Bottom Line? An Innovative Proposal for Change.

    Science.gov (United States)

    Ledbetter, Tamera; Shultz, Sarah; Beckham, Roxanne

    2017-10-01

    Nursing interruptions are a costly and dangerous variable in acute care hospitals. Malfunctioning technology equipment interrupts nursing care and prevents full utilization of computer safety systems to prevent patient care errors. This paper identifies an innovative approach to nursing interruptions related to computer and computer cart malfunctions. The impact on human resources is defined and outcome measures were proposed. A multifaceted proposal, based on a literature review, aimed at reducing nursing interruptions is presented. This proposal is expected to increase patient safety, as well as patient and nurse satisfaction. Acute care hospitals utilizing electronic medical records and bar-coded medication administration technology. Nurses, information technology staff, nursing informatics staff, and all leadership teams affected by technology problems and their proposed solutions. Literature from multiple fields was reviewed to evaluate research related to computer/computer cart failures, and the approaches used to resolve these issues. Outcome measured strategic goals related to patient safety, and nurse and patient satisfaction. Specific help desk metrics will demonstrate the effect of interventions. This paper addresses a gap in the literature and proposes practical and innovative solutions. A comprehensive computer and computer cart repair program is essential for patient safety, financial stewardship, and utilization of resources. © 2015 Wiley Periodicals, Inc.

  15. Shale gas technology innovation rate impact on economic Base Case – Scenario model benchmarks

    International Nuclear Information System (INIS)

    Weijermars, Ruud

    2015-01-01

    Highlights: • Cash flow models control which technology is affordable in emerging shale gas plays. • Impact of technology innovation on IRR can be as important as wellhead price hikes. • Cash flow models are useful for technology decisions that make shale gas plays economic. • The economic gap can be closed by appropriate technology innovation. - Abstract: Low gas wellhead prices in North America have put its shale gas industry under high competitive pressure. Rapid technology innovation can help companies to improve the economic performance of shale gas fields. Cash flow models are paramount for setting effective production and technology innovation targets to achieve positive returns on investment in all global shale gas plays. Future cash flow of a well (or cluster of wells) may either improve further or deteriorate, depending on: (1) the regional volatility in gas prices at the wellhead – which must pay for the gas resource extraction, and (2) the cost and effectiveness of the well technology used. Gas price is an externality and cannot be controlled by individual companies, but well technology cost can be reduced while improving production output. We assume two plausible scenarios for well technology innovation and model the return on investment while checking against sensitivity to gas price volatility. It appears well technology innovation – if paced fast enough – can fully redeem the negative impact of gas price decline on shale well profits, and the required rates are quantified in our sensitivity analysis

  16. 75 FR 24773 - Research and Innovative Technology Administration Advisory Council on Transportation Statistics...

    Science.gov (United States)

    2010-05-05

    ... DEPARTMENT OF TRANSPORTATION Bureau of Transportation Statistics Research and Innovative Technology Administration Advisory Council on Transportation Statistics; Notice of Meeting AGENCY: Research... Transportation, Research and Innovative Technology Administration, Bureau of Transportation Statistics, Attention...

  17. Significance of promoting innovative efforts and technology transfer for industry

    Energy Technology Data Exchange (ETDEWEB)

    Rembser, J [Bundesministerium fuer Forschung und Technologie, Bonn-Bad Godesberg (Germany, F.R.)

    1978-11-01

    Technological know how and innovations will be of considerable future importance for West German industry. Changes in the reliability of sources of supply (energy, raw materials), the burden imposed on the environment by intensive industrial production and numerous private sources, and the stiffening of international competition necessitate cLoser collaboration between industry and government. Public aid in research and development efforts will assume an important role. In West Germany there is a wide variety of such governmental aids. The range extends from direct grants to enterprises for research and development work to the furnishing of advice to promote innovative efforts and technology transfer. Banks provide risk capital with governmental aid to firms trying to indroduce high-risk innovations into the market. In recent years the aim has been to provide small and medium-size firms with better access to technological know how and governmental aids.

  18. Innovation and technological development of industrial regions in the conditions of socioeconomic insecurity

    Directory of Open Access Journals (Sweden)

    Irina Markovna Golova

    2015-03-01

    Full Text Available The article is devoted to the identification of the characteristics and priorities of innovation and technological development in the industrial regions of the Russian Federation in the context of the ongoing global crisis. The authors come from the hypothesis that, in these circumstances, the strategy of innovative development of industrial regions, in order to ensure their sustainability and the creation of conditions for further growth, should be an integral part of their industrial policies and focus primarily on the modernization and improvement of technical and technological level of basic units. On the basis of the analysis of statistical data about the status of the innovation capacity in the Russian Federation, the authors have identified the root causes of the continuing backlog of advanced foreign countries by the level of innovative development (raw-material orientation of the Russian economy that enhances the technological dependence of the developed countries; insufficient financial support for innovation activities by the state; the orientation of innovation in imitation and borrowing. The necessity to take into account in the development and implementation of the socio-economic strategic regions of the Russian Federation and the close relationship between the industrial-technological and innovation component of social development is proved. In order to improve the effectiveness of regional development policies, the classification of Russian regions considering their industrial and technological specialization is proposed, the required elements and characteristics of effective innovation systems for each type of region are allocated. In the article, the proposals on measures of the state support for innovation development of industrial regions, with the aim of improving their sustainability and competitiveness in the face of geopolitical and economic uncertainty are determined. The article is addressed to professionals in the

  19. H.E. Mr. Ronaldo Mota Sardenberg, Minister for Science, Technology and Innovation, Brazil

    CERN Multimedia

    Maximilien Brice

    2002-01-01

    Photo 01: Signature of the joint statement by H.E. Mr Ronaldo Mota Sardenberg, Minister for Science, Technology and Innovation, Brazil (centre) with CERN Director-General, L. Maiani (right) and C. Melo. Photo 02: Signature of the joint statement by H.E. Mr Ronaldo Mota Sardenberg, Minister for Science, Technology and Innovation, Brazil (left) and CERN Director-General, L. Maiani. Photo 03: H.E. Mr Ronaldo Mota Sardenberg, Minister for Science, Technology and Innovation, Brazil and CERN Director-General, L. Maiani.

  20. Teachers in school-based technology innovations : A typology of their beliefs on teaching and technology

    NARCIS (Netherlands)

    Admiraal, Wilfried; Louws, Monika; Lockhorst, Ditte; Paas, Tineke; Buynsters, Michael; Cviko, Amina; Janssen, Caressa; de Jonge, Mario; Nouwens, Suzan; Post, Lysanne S.; van der Ven, Frauke; Kester, Liesbeth

    2017-01-01

    In many innovations in technology and education in secondary schools, teachers are the crucial agents of these innovations. To select, match and support groups of teachers for particular school projects, school principals could be supported with insights into teachers’ beliefs about teaching,

  1. The Role of Technological Innovations for Dry Storage of Used Nuclear Fuel

    International Nuclear Information System (INIS)

    Issard, H.

    2015-01-01

    development. Innovative production methods with combination of economic and reliable technologies are also a key factor for an acceptable used fuel storage system by the customers. Concerning interfaces for handling, loading and transfer, improvements and optimisation are expected for fuel transfer or cask transfer or tie down systems. As the competitiveness relies also upon the optimal fuel utilization, a target for R&D is quick evacuation. Some key processes like drying to avoid gas build up in cask cavity also requires innovative solutions. Regulatory requirements for safe storage are still progressing, specifically to reduce dose exposure. To match these expectations, safety justification methods need to be updated and the knowledge of safety margins must be continuously improved. In this improvement process we observe several innovations, for example for criticality-safety with burnup credit, moderator exclusion, evaluation of fuel integrity, analysis of accident conditions with new shock absorbing covers and new calculation models, and also new evaluation methods of material behaviour for longer periods of interim storage up to 100 years. The role of innovation is to help development and acceptance of an industry or activity which is critical to limit CO 2 emissions. In the new landscape of the nuclear renaissance, new technical developments will be associated with innovative features and designs, which will offer both high performance systems to customers who have the responsibility of storage and safety and reduction of radiation exposure benefits to all the stakeholders. (author)

  2. 76 FR 4137 - Comment Request: Innovative Technology Experiences for Students and Teachers (ITEST) Program

    Science.gov (United States)

    2011-01-24

    ... NATIONAL SCIENCE FOUNDATION Comment Request: Innovative Technology Experiences for Students and... Friday. SUPPLEMENTARY INFORMATION: Title of Collection: Innovative Technology Experiences for Students... Technology Experiences for Students and Teachers (ITEST) is a National Science Foundation program that...

  3. Composites Manufacturing Education and Technology Facility Expedites Manufacturing Innovation

    Energy Technology Data Exchange (ETDEWEB)

    2017-01-01

    The Composites Manufacturing Education and Technology facility (CoMET) at the National Wind Technology Center at the National Renewable Energy Laboratory (NREL) paves the way for innovative wind turbine components and accelerated manufacturing. Available for use by industry partners and university researchers, the 10,000-square-foot facility expands NREL's composite manufacturing research capabilities by enabling researchers to design, prototype, and test composite wind turbine blades and other components -- and then manufacture them onsite. Designed to work in conjunction with NREL's design, analysis, and structural testing capabilities, the CoMET facility expedites manufacturing innovation.

  4. Diagnosing Management of Agricultural Research and Technology Development under the Agricultural Innovation Framework

    Directory of Open Access Journals (Sweden)

    2014-06-01

    Full Text Available This study aimed at identifying and analyzing issues and challenges on the agricultural research and technology development under the national innovation framework. The survey consisted of two groups: agricultural researchers of Agriculture-Research and Education Organization and all faculty members of public agricultural faculties of Ministry of Scientific, Research and Technology. Using Cochran sampling formula and multi-stage sampling method, 188 researchers and 205 faculty members were selected in order to fill in the survey questionnaire. Using the SPSS, collected data analyzed based on explanatory factor analysis. Totally, factor analysis of three sets of issues and challenges on the agricultural research and technology development under the national innovation framework led to extract 13 factors, including agricultural structure and policy, infrastructure and resources of agricultural development, supportive services for agricultural development (level of agricultural development, investment and capacity building in research and technology, management of research and technology development, research and technology productivity, research culture, networks for research and technology development (level of national innovation system, agricultural research policy, impacts and effectiveness of agricultural research and technology development, integrated management of research and technology, institutional development for agricultural research and technology and systematic synergy of agricultural research and higher education (level of agricultural innovation system. Totally, these three sets of factors explained 64%, 75% and 73% of the total variances. Finally, using conceptual clustering for the extracted factors, a conceptual model of issues and challenges of agricultural research and technology development under the national innovation framework was presented.

  5. Biology technology, and innovation in high school curriculum

    Directory of Open Access Journals (Sweden)

    Antonio Carlos Rodrigues de Amorim

    1998-01-01

    Full Text Available Based on frameworks that propose the contextualization of science education centered in the science/technology/ society relationships, and on the belief that the teacher has a fundamental role on the curriculum innovation processes, this paper describes and analyses different elements of the pedagogical practice of teachers of the city of Campinas/SP, in the perspective of outlining an overview regarding the already existing biology and technology relationship. It focuses in a detailed way the conceptions of the relationships between biology and technology present in the instructional materials used or produced by teachers, describing and discussing the wide range spectrum of identified possibilities. It also emphasizes the approaches to biology and technology relationships identified by interviewing the teachers, being them similar or not to those found in the instructional materials. Indicators of the existence of a problematic theory and practice association, in which the theoretical elements (science are hierarchically superior to the practical elements (technology, were detected. This kind of association should constitute a focus of attention in the construction of innovative proposals for the biology curriculum, since science classroom discussions regarding technology – in their ethical, aesthetical, epistemological, and marketing aspects – represent an important path to dimension the biological knowledge in the capitalist contemporary society.

  6. Technologically Reflective Individuals as Enablers of Social Innovation*

    Science.gov (United States)

    Rau, Christiane; Gassmann, Oliver; van den Hende, Ellis

    2015-01-01

    This paper identifies technologically reflective individuals and demonstrates their ability to develop innovations that benefit society. Technological reflectiveness (TR) is the tendency to think about the societal impact of an innovation, and those who display this capability in public are individuals who participate in online idea competitions focused on technical solutions for social problems (such as General Electric's eco‐challenge, the James Dyson Award, and the BOSCH Technology Horizon Award). However, technologically reflective individuals also reflect in private settings (e.g., when reading news updates), thus requiring a scale to identify them. This paper describes the systematic development of an easy‐to‐administer multi‐item scale to measure an individual's level of TR. Applying the TR scale in an empirical study on a health monitoring system confirmed that individuals' degree of TR relates positively to their ability to generate (1) more new product features and uses, (2) features with higher levels of societal impact, and (3) features that are more elaborated. This scale allows firms seeking to implement co‐creation in their new product development (NPD) process and sustainable solutions to identify such individuals. Thus, this paper indicates that companies wishing to introduce new technological products with a positive societal impact may profit from involving technologically reflective individuals in the NPD process. PMID:27134342

  7. Technologically Reflective Individuals as Enablers of Social Innovation.

    Science.gov (United States)

    Schweitzer, Fiona; Rau, Christiane; Gassmann, Oliver; van den Hende, Ellis

    2015-11-01

    This paper identifies technologically reflective individuals and demonstrates their ability to develop innovations that benefit society. Technological reflectiveness (TR) is the tendency to think about the societal impact of an innovation, and those who display this capability in public are individuals who participate in online idea competitions focused on technical solutions for social problems (such as General Electric's eco-challenge, the James Dyson Award, and the BOSCH Technology Horizon Award). However, technologically reflective individuals also reflect in private settings (e.g., when reading news updates), thus requiring a scale to identify them. This paper describes the systematic development of an easy-to-administer multi-item scale to measure an individual's level of TR. Applying the TR scale in an empirical study on a health monitoring system confirmed that individuals' degree of TR relates positively to their ability to generate (1) more new product features and uses, (2) features with higher levels of societal impact, and (3) features that are more elaborated. This scale allows firms seeking to implement co-creation in their new product development (NPD) process and sustainable solutions to identify such individuals. Thus, this paper indicates that companies wishing to introduce new technological products with a positive societal impact may profit from involving technologically reflective individuals in the NPD process.

  8. Innovation and Technology Dissemination in Clean Technology Markets and The Developing World: The Role of Trade, Intellectual Property Rights, and Uncertainty

    Directory of Open Access Journals (Sweden)

    Kristina M. Lybecker

    2014-01-01

    Full Text Available Innovation is an inherently risky and uncertain process. Many of the broader challenges to innovation in general are both mirrored and exaggerated in clean technology innovation. The development of environmental technologies is further complicated by the public goods nature of knowledge, environmental externalities, and uncertainty. This study on clean technology focuses on recent work on the role of uncertainty, the participation of emerging and developing nations, the controversy surrounding intellectual property rights, and the variety of market actors and strategies in place. The paper also considers the policy instruments that are available, the cost, benefits and consequences of their use. As scholars continue to analyze when, where, why and how clean technology innovations are developed and adopted, it is essential that government policymakers aim to reduce uncertainty and risk, incentivize innovation with effective intellectual property rights, and foster transparency in the market. This continues to be a field of increasing future importance, and a rich area for continued academic study and analysis. Consumers, government policymakers and innovators would all benefit from a greater understanding of the process of technological change in the development, diffusion and financing of clean technologies.

  9. 77 FR 22359 - Innovative Technology Experiences for Students and Teachers (ITEST) Program; Comment Request

    Science.gov (United States)

    2012-04-13

    ... NATIONAL SCIENCE FOUNDATION Innovative Technology Experiences for Students and Teachers (ITEST.... SUPPLEMENTARY INFORMATION: Title of Collection: Innovative Technology Experiences for Students and Teachers... opportunities for students and teachers to learn about, experience, and use information technologies within the...

  10. Experience-based innovations in management of nuclear power plant technology

    International Nuclear Information System (INIS)

    Wagner, R.L.; Bradbury, R.B.; Freeman, D.V.; Jacobs, S.B.

    1987-01-01

    During 45 years of nuclear technology development and experience, Stone and Webster (S and W) has developed and successfully applied various innovative techniques to numerous nuclear projects. These techniques, developed primarily in response to the increasing scope and complexity of nuclear power plants, have been used and refined to provide efficient management of the two major nuclear project acticities-design and construction. For this paper, these techniques have been divided into: 1) engineering-based innovations, 2) construction-based innovations, and 3) management-based innovations. (author)

  11. Experience-based innovations in management of nuclear power plant technology

    International Nuclear Information System (INIS)

    Wagner, R.L.; Bradbury, R.B.; Freeman, D.V.; Jacobs, S.B.

    1988-01-01

    During 45 years of nuclear technology development and experience, Stone and Webster (S and W) has developed and successfully applied various innovative techniques to numerous nuclear projects. These techniques, developed primarily in response to the increasing scope and complexity of nuclear power plants, have been used and refined to provide efficient management of the two major nuclear project activities - design and construction. For this paper, these techniques have been divided into: (1) engineering-based innovations, (2) construction-based innovations, and (3) management-based innovations

  12. How Should Organizations Promote Equitable Distribution of Benefits from Technological Innovation in Health Care?

    Science.gov (United States)

    Nambisan, Satish; Nambisan, Priya

    2017-11-01

    Technological innovations typically benefit those who have good access to and an understanding of the underlying technologies. As such, technology-centered health care innovations are likely to preferentially benefit users of privileged socioeconomic backgrounds. Which policies and strategies should health care organizations adopt to promote equitable distribution of the benefits from technological innovations? In this essay, we draw on two important concepts-co-creation (the joint creation of value by multiple parties such as a company and its customers) and digitalization (the application of new digital technologies and the ensuing changes in sociotechnical structures and relationships)-and propose a set of policies and strategies that health care organizations could adopt to ensure that benefits from technological innovations are more equitably distributed among all target populations, including resource-poor communities and individuals. © 2017 American Medical Association. All Rights Reserved.

  13. Effects of RFID Technology on the Logistics Innovation

    OpenAIRE

    金, 双鴿; Shuangge, JIN

    2010-01-01

    An advanced automatic identification technology based on the Radio Frequency Identification (RFID) technology has significant value for inventory systems. RFID tag is a microchip combined with an antenna in a compact package and is called also IC tag. Other benefits of using RFID include the reduction of labor costs, the simplification of business processes, and the reduction of inventory inaccuracies. This paper aims to analyse the effects of RFID technology on the logistics innovation.

  14. Voices Project: Technological Innovations in Social Inclusion of People with Visual Impairment

    Directory of Open Access Journals (Sweden)

    Janaina Cazini

    2013-04-01

    Full Text Available This article aims to analyze how technological innovations are contributing to inclusion of people with disabilities in society and at work, from the study of social innovations, assistive technology and digital inclusion presented in a case study on the Voices Project. The project, developed in partnership with the Association of Parents and Friends of the Blind and the Federal Technological University of Paraná, in the years 2008/2009, made a computer course for people with visual impairments. The theoretical survey and project data confirmed that social innovations really are essential tools for digital inclusion of people with disabilities contributing thus to their inclusion in the workplace.

  15. Technology innovation and entrepreneurial state: the development of China's high-speed rail industry

    NARCIS (Netherlands)

    Sun, Z.

    2015-01-01

    China proactively promotes indigenous technology innovation towards developing an innovation-based economy. This contradicts the developmental state literature that puts emphasis on technology imitation. Drawn from the strategic entrepreneurship perspective, this article explores the role of the

  16. Improving early cycle economic evaluation of diagnostic technologies.

    Science.gov (United States)

    Steuten, Lotte M G; Ramsey, Scott D

    2014-08-01

    The rapidly increasing range and expense of new diagnostics, compels consideration of a different, more proactive approach to health economic evaluation of diagnostic technologies. Early cycle economic evaluation is a decision analytic approach to evaluate technologies in development so as to increase the return on investment as well as patient and societal impact. This paper describes examples of 'early cycle economic evaluations' as applied to diagnostic technologies and highlights challenges in its real-time application. It shows that especially in the field of diagnostics, with rapid technological developments and a changing regulatory climate, early cycle economic evaluation can have a guiding role to improve the efficiency of the diagnostics innovation process. In the next five years the attention will move beyond the methodological and analytic challenges of early cycle economic evaluation towards the challenge of effectively applying it to improve diagnostic research and development and patient value. Future work in this area should therefore be 'strong on principles and soft on metrics', that is, the metrics that resonate most clearly with the various decision makers in this field.

  17. Evaluation and analysis of barriers to the innovation activity in the economy of the region

    Directory of Open Access Journals (Sweden)

    D. A. Tomasova

    2017-01-01

    Full Text Available Prospects for the development of the Russian innovative economy largely depend on the successful overcoming of negative factors impeding the effective interaction of institutions in the field of education, science, business, credit and fi nancial sphere regarding the creation, transfer and commercialization of innovations. Deep evaluation of innovative problems needs dynamic analysis of main processes in the spheres accompanying the innovation activity, which determines the topicality of this article. The aim of research consists in elaborating a dynamic approach to complex estimation of problems and barriers to the innovative development of Russia, including their structure and change. In order to do that, this article reviews the main barriers to the development of innovation activity in the region, builds a detailed classifi cation of parameters of innovative economic environment, and analyses their dynamics. The algorithm of innovation barriers assessment is based on economic statistics methods and fuzzy sets theory. This algorithm is determined on the basis of linguistic variables according to the matrix principle and linguistic identifi cation of economic objects. The estimation is based on a dynamic approach, that is, each analyzed indicator represents a rate of growth of one or another factor associated with the level of barriers to the innovation activity and therefore reflects the degree of reduction or strengthening in such barrier for the period under review. The minimax normalization allows providing comparability of all indicators under review. Macroeconomic data and indices of Russian enterprises operation, presented in statistical collections were used as the input data for analysis and estimation. As a result, we evaluated the level of overcoming barriers to innovative development during the past three years on the basis of analyzing research human potential, of development of innovative infrastructure

  18. Innovative Alternative Technologies to Extract Carotenoids from Microalgae and Seaweeds.

    Science.gov (United States)

    Poojary, Mahesha M; Barba, Francisco J; Aliakbarian, Bahar; Donsì, Francesco; Pataro, Gianpiero; Dias, Daniel A; Juliano, Pablo

    2016-11-22

    Marine microalgae and seaweeds (microalgae) represent a sustainable source of various bioactive natural carotenoids, including β-carotene, lutein, astaxanthin, zeaxanthin, violaxanthin and fucoxanthin. Recently, the large-scale production of carotenoids from algal sources has gained significant interest with respect to commercial and industrial applications for health, nutrition, and cosmetic applications. Although conventional processing technologies, based on solvent extraction, offer a simple approach to isolating carotenoids, they suffer several, inherent limitations, including low efficiency (extraction yield), selectivity (purity), high solvent consumption, and long treatment times, which have led to advancements in the search for innovative extraction technologies. This comprehensive review summarizes the recent trends in the extraction of carotenoids from microalgae and seaweeds through the assistance of different innovative techniques, such as pulsed electric fields, liquid pressurization, supercritical fluids, subcritical fluids, microwaves, ultrasounds, and high-pressure homogenization. In particular, the review critically analyzes technologies, characteristics, advantages, and shortcomings of the different innovative processes, highlighting the differences in terms of yield, selectivity, and economic and environmental sustainability.

  19. Innovative Alternative Technologies to Extract Carotenoids from Microalgae and Seaweeds

    Science.gov (United States)

    Poojary, Mahesha M.; Barba, Francisco J.; Aliakbarian, Bahar; Donsì, Francesco; Pataro, Gianpiero; Dias, Daniel A.; Juliano, Pablo

    2016-01-01

    Marine microalgae and seaweeds (microalgae) represent a sustainable source of various bioactive natural carotenoids, including β-carotene, lutein, astaxanthin, zeaxanthin, violaxanthin and fucoxanthin. Recently, the large-scale production of carotenoids from algal sources has gained significant interest with respect to commercial and industrial applications for health, nutrition, and cosmetic applications. Although conventional processing technologies, based on solvent extraction, offer a simple approach to isolating carotenoids, they suffer several, inherent limitations, including low efficiency (extraction yield), selectivity (purity), high solvent consumption, and long treatment times, which have led to advancements in the search for innovative extraction technologies. This comprehensive review summarizes the recent trends in the extraction of carotenoids from microalgae and seaweeds through the assistance of different innovative techniques, such as pulsed electric fields, liquid pressurization, supercritical fluids, subcritical fluids, microwaves, ultrasounds, and high-pressure homogenization. In particular, the review critically analyzes technologies, characteristics, advantages, and shortcomings of the different innovative processes, highlighting the differences in terms of yield, selectivity, and economic and environmental sustainability. PMID:27879659

  20. The Identification of Technology Platforms and Innovation Areas with High Regional Impact

    Directory of Open Access Journals (Sweden)

    Nataša Urbančíková

    2011-10-01

    Full Text Available The paper is focused on the process of identification of the technological platforms and innovation areas with high regional impact. The aim is to discover future fields of technological innovation which are having a high qualitative and quantitative demand of high potentials. The research has been undertaken within project Innovative Development of European Areas by fostering transnational Knowledge Development – IDEA/ 2CE1175P1 funded by Central Europe Programme. The aim of IDEA project is the development of an adequate strategy which enables the small and medium sized enterprises in the regions of Central Europe to face the increasing demand of high potentials with tested methods and instruments. The target group of IDEA project are so called “high potentials” in the engineering and scientific sector where future-oriented technologies are one of the main sources of innovation.

  1. Understanding the build-up of a technological innovation system around hydrogen and fuel cell technologies

    NARCIS (Netherlands)

    Suurs, R.A.A.; Hekkert, M.P.; Smits, R.E.H.M.

    2009-01-01

    This study provides insight into the development of hydrogen and fuel cell technologies in the Netherlands (1980-2007). This is done by applying a Technological Innovation System (TIS) approach. This approach takes the perspective that a technology is shaped by a surrounding network of actors,

  2. A Comparative Assessment of Wind Turbine Innovation and Diffusion Policies. Historical Case Studies of Energy Technology Innovation

    DEFF Research Database (Denmark)

    Neij, Lena; Andersen, Per Dannemand

    2012-01-01

    Wind turbines have become a mainstream technology, a first choice for many when investing in new electricity generation facilities. This comparative case study addresses how governmental policy has been formulated to support the wind turbine innovation and diffusion process. Three innovation stages...... and corresponding innovation strategies are identified. The first stage is the early movers of the 1970s and early 1980s, including pioneer countries such as Denmark, the United States, Germany, and the Netherlands. The second stage is the booming markets of the 1990s, guided by the successful Danish innovation...

  3. Biomimicry and the Materiality of Ecological Technology and Innovation

    NARCIS (Netherlands)

    Blok, V.

    2016-01-01

    In this paper, we reflect on the concept of nature that is presupposed in biomimetic approaches to technology and innovation. Because current practices of biomimicry presuppose a technological model of nature, it is questionable whether its claim of being a more ecosystem friendly approach to

  4. Organisational Culture and Technology-Enhanced Innovation in Higher Education

    Science.gov (United States)

    Zhu, Chang

    2015-01-01

    Higher education institutions are evolving and technology often plays a central role in their transformations. Educational changes benefit from a supportive environment. The study examines the relationship between organisational culture and teachers' perceptions of and responses to technology-enhanced innovation among Chinese universities. A…

  5. New Technologies, Old Habits: Automation without Innovation

    Directory of Open Access Journals (Sweden)

    José Osvaldo De Sordi

    2012-01-01

    Full Text Available This research investigated the underuse of technological tools by innovative organizations which are acknowledged for their use of and familiarity with new technologies. The research conducted an analysis of 58 institutional repositories (IRs out of 43 educational and research institutions which are internationally renowned for excellence. The core aspect of the analysis was the use of IRs for publishing and dealing with evidence in order to legitimize and add value to scientific research. The following items were analyzed: (a the logical structuring of scientific communication published in the IRs; (b the metadata which describe scientific communication based on the terms of the DCMI protocol used; (c the availability of software functions which facilitate the queries and publication of evidences. Results show that the introduction of IRs did not add value to the quality of research in terms of associating and publishing evidence that could back them up. A strong tendency to replicate the traditional library model of physical collections was observed. It was concluded that merely possessing good technological tools is not sufficient for fostering innovation and strategic gains in organizations, even if their implementation takes place in highly promising and favorable environments.

  6. Technology innovation in an integrated energy economy

    International Nuclear Information System (INIS)

    Isaacs, E.

    2006-01-01

    A discussion on technology innovation in an integrated energy economy was presented. The mission, mandate and strategy of the Alberta Research Institute was first presented, followed by a discussion on oil supply needs based on historic demand. The presentation then addressed what might happen as oil demand and supply peak. A comparison of conventional versus unconventional resources was included along with a chart illustrating Alberta's contribution to total global reserves. Other topics addressed in the presentation in chart format included: natural gas requirements and natural gas use in oil sands; marketable gas production and the number of producing gas wells; Alberta's natural gas situation; and net United States imports of natural gas. Options for reducing natural gas consumption in oil sand production processes were also identified. These included steam assisted gravity drainage; solvent processes, electrical heating, combustion, nuclear, geothermal, and gasification processes. Advantages and disadvantages of replacing natural gas through gasification were presented. Last, the presentation provided an unconventional gas technology roadmap and discussed an innovative energy technology program. It was concluded that there are no clear cut options for replacing the huge amount of natural gas needed in the expanding oil sands sector. tabs., figs

  7. Evolving provider payment models and patient access to innovative medical technology.

    Science.gov (United States)

    Long, Genia; Mortimer, Richard; Sanzenbacher, Geoffrey

    2014-12-01

    Abstract Objective: To investigate the evolving use and expected impact of pay-for-performance (P4P) and risk-based provider reimbursement on patient access to innovative medical technology. Structured interviews with leading private payers representing over 110 million commercially-insured lives exploring current and planned use of P4P provider payment models, evidence requirements for technology assessment and new technology coverage, and the evolving relationship between the two topics. Respondents reported rapid increases in the use of P4P and risk-sharing programs, with roughly half of commercial lives affected 3 years ago, just under two-thirds today, and an expected three-quarters in 3 years. All reported well-established systems for evaluating new technology coverage. Five of nine reported becoming more selective in the past 3 years in approving new technologies; four anticipated that in the next 3 years there will be a higher evidence requirement for new technology access. Similarly, four expected it will become more difficult for clinically appropriate but costly technologies to gain coverage. All reported planning to rely more on these types of provider payment incentives to control costs, but didn't see them as a substitute for payer technology reviews and coverage limitations; they each have a role to play. Interviews limited to nine leading payers with models in place; self-reported data. Likely implications include a more uncertain payment environment for providers, and indirectly for innovative medical technology and future investment, greater reliance on quality and financial metrics, and increased evidence requirements for favorable coverage and utilization decisions. Increasing provider financial risk may challenge the traditional technology adoption paradigm, where payers assumed a 'gatekeeping' role and providers a countervailing patient advocacy role with regard to access to new technology. Increased provider financial risk may result in an

  8. The Influencing Factors, Regional Difference and Temporal Variation of Industrial Technology Innovation: Evidence with the FOA-GRNN Model

    Directory of Open Access Journals (Sweden)

    Yongli Zhang

    2018-01-01

    Full Text Available Technology innovation is a motivating force for sustainable development. The recognition and measurement of influencing factors are a basic prerequisite of technology innovation research. In response to the gaps and shortages of existing theories and methods, this paper builds the impact indicators of technology innovation, the proposed FOA-GRNN model, and analyzes the influencing factors, regional differences and temporal variations of technology innovation based on industrial above-scale enterprises of 31 provinces in China from 2008 to 2015. The empirical results show that innovation investment is a determinant of technology innovation in China, and is more and more significant; meanwhile a wide gap of innovation resource between Eastern China and Western China exists. In general, the enterprise scale has a negative effect: with enlargement of enterprise in China, the innovation efficiency of enterprise will decline, while the effect has regional disparity, with positive influence in Central and Western China, and negative influence in Eastern China. Government support has negative effects on technology innovation: indirect equity investment contributes more to technology innovation than direct fund support. Innovation environment has positive and weak effects on technology innovation, but it is the biggest obstacle in Western China, and the innovation environment in China has improved continuously. This paper provides new evidence that can shine some light on determining the factors affecting technology innovation, and also presents a novel approach, which comprises characteristics of nonlinear function approximation, high accuracy and a small sample.

  9. Centrifugal shot blasting. Innovative technology summary report

    International Nuclear Information System (INIS)

    1999-07-01

    At the US Department of Energy (DOE) Fernald Environmental Management Project (FEMP), the Facilities Closure and Demolition Projects Integrated Remedial Design/Remedial Action (RD/RA) work plan calls for the removal of one inch (1 in) depth of concrete surface in areas where contamination with technetium-99 has been identified. This report describes a comparative demonstration between two concrete removal technologies: an innovative system using Centrifugal Shot Blasting (CSB) and a modified baseline technology called a rotary drum planer

  10. How to Improve the Supportive Role of Estonian Innovation System toward Launching New Products by High Technology Companies?

    Directory of Open Access Journals (Sweden)

    Liisi Sepp

    2013-01-01

    Full Text Available The purpose of the study is to evaluate how supportive is Estonian national innovation system toward the launching of new innovative products by high technology firms. The article intends to combine two broad areas of research – national innovation system approach and the different models of the new product launching. Based on the literature review and in-depth analysis of three case studies of Estonian high-tech company’s major barriers as well success factors of highly innovative product launches were identified. The barriers of the new product launching were linked with the systemic failures of the national innovation system. The most relevant failures of Estonian national innovation system inhibiting the new product development are capability and networking failures. The sources of innovation of high-technology firms are too narrow, linkages with domestic firms and higher education institutions as well with foreign firms are poorly developed. High-tech firms have also serious capacity problems due to the extremely weak support mechanism by national innovation system on the seed funding stage of product development and prototype building stage as well. Paper argues that resources needed for the innovation should not be looked too narrowly following linear innovation model approach. Instead interactive approach is needed, which combines capability building, network development, interactive learning with direct investments into fundamental research.

  11. 78 FR 90 - National Medal of Technology and Innovation Call for 2013 Nominations

    Science.gov (United States)

    2013-01-02

    ... successful products and services. Eligibility and Nomination Criteria: Nomination Guidelines and nomination...] National Medal of Technology and Innovation Call for 2013 Nominations AGENCY: United States Patent and... Medal of Technology and Innovation (NMTI). Since establishment by Congress in the Stevenson-Wydler...

  12. FY2011 Engineering Innovations, Research, and Technology Report

    Energy Technology Data Exchange (ETDEWEB)

    Hamilton, Kip [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Martz, Harry E. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Poyneer, Lisa A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Shusteff, Maxim [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Spadaccini, Christopher M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Hopkins, Jonathan B. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Bernier, Joel V. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); King, Michael J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Puso, Michael A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Weisgraber, Todd H. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Goldstein, Noah C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Sales, Ana Paula De Oliveira [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Dehlinger, Dietrich A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Kotovsky, Jack [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Kuntz, Joshua D. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Voss, Lars F. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Wheeler, Elizabeth K. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Chang, John T. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Lehman, Sean K. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Vernon, Stephen P. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Tang, Vincent [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2012-04-24

    This report summarizes key research, development, and technology advancements in Lawrence Livermore National Laboratory’s Engineering Directorate for FY2011. These efforts exemplify Engineering’s nearly 60-year history of developing and applying the technology innovations needed for the Laboratory’s national security missions, and embody Engineering’s mission to “Enable program success today and ensure the Laboratory’s vitality tomorrow.

  13. Kazakhstan innovation projects in nuclear technologies field

    International Nuclear Information System (INIS)

    Shkol'nik, V.S.; Tukhvatulin, Sh.T.

    2005-01-01

    At present in the Republic of Kazakhstan in preparation and realization stage there are several innovation projects related with use of advanced nuclear technologies. Projects are as follows: 'Implementation of Kazakhstan thermonuclear reactor tokamak (KTM)'; 'Implementation at the L.N. Gumilev Eurasian National University the inter-disciplinary research complex on the heavy ions accelerator base'; 'Development of the Technological Park 'Nuclear Technologies Center in Kurchatov city'; 'Development the first in the Central-Asian region Center of Nuclear Medicine and Biophysics'. The initiator and principal operator of these projects is the National Nuclear Center of the Republic of Kazakhstan

  14. Disruptive Innovation in Air Measurement Technology: Reality ...

    Science.gov (United States)

    This presentation is a big picture overview on the changing state of air measurement technology in the world, with a focus on the introduction of low-cost sensors into the market place. The presentation discusses how these new technologies may be a case study in disruptive innovation for the air pollution measurement field. The intended audience is primarily those with experience in air pollution measurement methods, but much of the talk is accessible to the general public. This is a keynote presentation on emerging air monitoring technology, to be provided at the AWMA measurements conference in March, 2016.

  15. Purchasing medical innovation the right technology, for the right patient, at the right price

    CERN Document Server

    Robinson, James C

    2015-01-01

    Innovation in medical technology generates a remarkable supply of new drugs, devices, and diagnostics that improve health, reduce risks, and extend life. But these technologies are too often used on the wrong patient, in the wrong setting, or at an unaffordable price. The only way to moderate the growth in health care costs without undermining the dynamic of medical innovation is to improve the process of assessing, pricing, prescribing, and using new technologies. Purchasing Medical Innovation analyzes the contemporary revolution in the purchasing of health care technology, with a focus on th

  16. Renewable energy-driven innovative energy-efficient desalination technologies

    International Nuclear Information System (INIS)

    Ghaffour, Noreddine; Lattemann, Sabine; Missimer, Thomas; Ng, Kim Choon; Sinha, Shahnawaz; Amy, Gary

    2014-01-01

    Highlights: • Renewable energy-driven desalination technologies are highlighted. • Solar, geothermal, and wind energy sources were explored. • An innovative hybrid approach (combined solar–geothermal) has also been explored. • Innovative desalination technologies developed by our group are discussed. • Climate change and GHG emissions from desalination are also discussed. - Abstract: Globally, the Kingdom of Saudi Arabia (KSA) desalinates the largest capacity of seawater but through energy-intensive thermal processes such as multi-stage flash (MSF) distillation (>10 kW h per m 3 of desalinated water, including electrical and thermal energies). In other regions where fossil energy is more expensive and not subsidized, seawater reverse osmosis (SWRO) is the most common desalination technology but it is still energy-intensive (3–4 kW h e /m 3 ). Both processes therefore lead to the emission of significant amounts of greenhouse gases (GHGs). Moreover, MSF and SWRO technologies are most often used for large desalination facilities serving urban centers with centralized water distribution systems and power grids. While renewable energy (RE) sources could be used to serve centralized systems in urban centers and thus provide an opportunity to make desalination greener, they are mostly used to serve rural communities off of the grid. In the KSA, solar and geothermal energy are of most relevance in terms of local conditions. Our group is focusing on developing new desalination processes, adsorption desalination (AD) and membrane distillation (MD), which can be driven by waste heat, geothermal or solar energy. A demonstration solar-powered AD facility has been constructed and a life cycle assessment showed that a specific energy consumption of <1.5 kW h e /m 3 is possible. An innovative hybrid approach has also been explored which would combine solar and geothermal energy using an alternating 12-h cycle to reduce the probability of depleting the heat source

  17. Disruptive Innovation in Air Measurement Technology: Reality or Hype?

    Science.gov (United States)

    This presentation is a big picture overview on the changing state of air measurement technology in the world, with a focus on the introduction of low-cost sensors into the market place. The presentation discusses how these new technologies may be a case study in disruptive innov...

  18. Review of early assessment models of innovative medical technologies.

    Science.gov (United States)

    Fasterholdt, Iben; Krahn, Murray; Kidholm, Kristian; Yderstræde, Knud Bonnet; Pedersen, Kjeld Møller

    2017-08-01

    Hospitals increasingly make decisions regarding the early development of and investment in technologies, but a formal evaluation model for assisting hospitals early on in assessing the potential of innovative medical technologies is lacking. This article provides an overview of models for early assessment in different health organisations and discusses which models hold most promise for hospital decision makers. A scoping review of published studies between 1996 and 2015 was performed using nine databases. The following information was collected: decision context, decision problem, and a description of the early assessment model. 2362 articles were identified and 12 studies fulfilled the inclusion criteria. An additional 12 studies were identified and included in the review by searching reference lists. The majority of the 24 early assessment studies were variants of traditional cost-effectiveness analysis. Around one fourth of the studies presented an evaluation model with a broader focus than cost-effectiveness. Uncertainty was mostly handled by simple sensitivity or scenario analysis. This review shows that evaluation models using known methods assessing cost-effectiveness are most prevalent in early assessment, but seems ill-suited for early assessment in hospitals. Four models provided some usable elements for the development of a hospital-based model. Crown Copyright © 2017. Published by Elsevier B.V. All rights reserved.

  19. Ricor's anniversary of 50 innovative years in cryogenic technology

    Science.gov (United States)

    Filis, Avishai; Segal, Victor; Pundak, Nachman; Bar Haim, Zvi; Danziger, Menachem

    2017-05-01

    Ricor cryogenics was founded in 1967 and since then it has focused on innovative technologies in the cryogenic field. The paper reviews the initial research and development efforts invested in various technologies that have yielded products such as Cryostats for Mossbauer Effect measurement, Liquid gas Dewar containers, Liquid helium vacuum transfer tubes, Cryosurgery and other innovative products. The major registered patents that matured to products such as a magnetic vacuum valve operator, pumped out safety valve and other innovations are reviewed here. As a result of continuous R and D investment, over the years a new generation of innovative Stirling cryogenic products has developed. This development began with massive split slip-on coolers and has progressed as far as miniature IDDCA coolers mainly for IR applications. The accumulated experience in Stirling technology is used also as a platform for developing self-contained water vapor pumps known as MicroStar and NanoStar. These products are also used in collaboration with a research institute in the field of High Temperature Superconductors. The continuous growth in the cryogenic products range and the need to meet market demands have motivated the expansion, of Ricor's manufacturing facility enabling it to become a world leader in the cryocooler field. To date Ricor has manufactured more than 120,000 cryocoolers. The actual cryogenic development efforts and challenges are also reviewed, mainly in the field of long life cryocoolers, ruggedized products, miniaturization and products for space applications.

  20. Innovative clean coal technology (ICCT): demonstration of selective catalytic reduction (SCR) technology for the control of nitrogen oxide (NOx) emission from high-sulfur, coal-fired boilers - economic evaluation of commercial-scale SCR applications for utility boilers

    International Nuclear Information System (INIS)

    Healy, E.C.; Maxwell, J.D.; Hinton, W.S.

    1996-09-01

    This report presents the results of an economic evaluation produced as part of the Innovative Clean Coal Technology project, which demonstrated selective catalytic reduction (SCR) technology for reduction of NO x emissions from utility boilers burning U.S. high-sulfur coal. The document includes a commercial-scale capital and O ampersand M cost evaluation of SCR technology applied to a new facility, coal-fired boiler utilizing high-sulfur U.S. coal. The base case presented herein determines the total capital requirement, fixed and variable operating costs, and levelized costs for a new 250-MW pulverized coal utility boiler operating with a 60-percent NO x removal. Sensitivity evaluations are included to demonstrate the variation in cost due to changes in process variables and assumptions. This report also presents the results of a study completed by SCS to determine the cost and technical feasibility of retrofitting SCR technology to selected coal-fired generating units within the Southern electric system

  1. Commercial development of environmental technologies for the automotive industry towards a new model of technological innovation

    Energy Technology Data Exchange (ETDEWEB)

    Clark, W.W. II [Office of Planning and Research, Sacramento, CA (United States); Paolucci, E. [Politecnico di Torino University (Italy). Production and Economics Dept.

    2001-07-01

    Economic importance of environmental issues is increasing, and new technologies are expected to reduce pollution derived both from productive processes and products, with costs that are still unknown. Until now there is still little knowledge concerning the process of technological innovation in this field. What does exist, is outdated due to rapid change in technology. In this paper we analyse the development of Zinc Air Fuel Cells (ZAFC) and their transfer from research laboratories to large mass production. ZAFC are a new environmental technology, proved to have a commercial value, that can be used for building Zero Emission Vehicles (ZEV). Although ZAFC performances are higher than traditional lead-acid batteries ones, difficulties in funding ZAFC engineering and moving them from laboratories to production caused some years delay in their diffusion. On the bases of this paradigmatic case, we argue that existing economic and organizational literature concerning technological innovation is not able to fully explain steps followed in developing environmental technologies. Existing models mainly consider adoption problems as due to market uncertainty, weak appropriability regime, lack of a dominant design, and difficulties in reconfiguring organizational routines. Additionally, the following aspects play a fundamental role in developing environmental technologies, pointing out how technological trajectories depend both on exogenous market conditions and endogenous firm competencies: 1 regulations concerning introduction of ZEV create market demand and business development for new technologies; they impose constraints that can be met only by segmenting transportation market at each stage of technology development; 2 each stage of technology development requires alternative forms of division and coordination of innovative labour; upstream and downstream industries are involved in new forms of inter-firm relationships, causing a reconfiguration of product architecture

  2. Innovative technologies for Faraday shield cooling

    International Nuclear Information System (INIS)

    Rosenfeld, J.H.; Lindemuth, J.E.; North, M.T.; Goulding, R.H.

    1995-01-01

    Alternative advanced technologies are being evaluated for use in cooling the Faraday shields used for protection of ion cyclotron range of frequencies (ICR) antennae in Tokamaks. Two approaches currently under evaluation include heat pipe cooling and gas cooling. A Monel/water heat pipe cooled Faraday shield has been successfully demonstrated. Heat pipe cooling offers the advantage of reducing the amount of water discharged into the Tokamak in the event of a tube weld failure. The device was recently tested on an antenna at Oak Ridge National Laboratory. The heat pipe design uses inclined water heat pipes with warm water condensers located outside of the plasma chamber. This approach can passively remove absorbed heat fluxes in excess of 200 W/cm 2 ;. Helium-cooled Faraday shields are also being evaluated. This approach offers the advantage of no liquid discharge into the Tokamak in the event of a tube failure. Innovative internal cooling structures based on porous metal cooling are being used to develop a helium-cooled Faraday shield structure. This approach can dissipate the high heat fluxes typical of Faraday shield applications while minimizing the required helium blower power. Preliminary analysis shows that nominal helium flow and pressure drop can sufficiently cool a Faraday shield in typical applications. Plans are in progress to fabricate and test prototype hardware based on this approach

  3. Technology Alliance Portfolios and Financial Performance : Value-Enhancing and Cost-Increasing Effects of Open Innovation

    NARCIS (Netherlands)

    Faems, Dries; de Visser, Matthias; Andries, Petra; Van Looy, Bart

    Firms increasingly adopt an open innovation model in which they rely on technology alliances to complement and supplement their internal innovation efforts. Although previous studies provide in-depth insight into the impact of technology alliances on the innovation performance, they remain

  4. Technology alliance portfolios and financial performance: Value-enhancing and cost-increasing effects of open innovation.

    NARCIS (Netherlands)

    Faems, D.L.M.; de Visser, Matthias; Andries, Petra; van Looy, Bart; van Looy, Bart

    2010-01-01

    Firms increasingly adopt an open innovation model in which they rely on technology alliances to complement and supplement their internal innovation efforts. Although previous studies provide in-depth insight into the impact of technology alliances on the innovation performance, they remain

  5. Technology Alliance Portfolios and Financial Performance : Value-Enhancing and Cost-Increasing Effects of Open Innovation

    NARCIS (Netherlands)

    Faems, Dries; de Visser, Matthias; Andries, Petra; Van Looy, Bart

    2010-01-01

    Firms increasingly adopt an open innovation model in which they rely on technology alliances to complement and supplement their internal innovation efforts. Although previous studies provide in-depth insight into the impact of technology alliances on the innovation performance, they remain

  6. Barriers to development and deployment of innovative waste minimization technologies

    International Nuclear Information System (INIS)

    Flores, E.A.; Donaghue, J.F.

    1994-08-01

    Increasing regulation and scrutiny is driving waste generators towards reducing the use of scarce natural resources and reducing or eliminating was streams. There is increasing emphasis on developing and deploying technologies that meet industry needs for recovering valuable materials in a cost-effective manner. At the Department of Energy's (DOE) Hanford Site, Battelle operates Pacific Northwest Laboratory (PNL). PNL's mission is to develop technologies to clean up the environment, and to assist industry in being competitive on a global scale. One such technology developed by PNL is the Waste Acid Detoxification and Reclamation (WADR) process. This technology recovers acids from metal-bearing spent solutions, separating out the metals (which are a valuable byproduct of the acid recycling operation) from the acids. WADR uses selective precipitation and distillation together in an innovative waste recycling technology. Selective precipitation removes the heavy metals, and vacuum distillation recovers clean acid. However, WADR and other innovative waste reduction technologies face numerous barriers to successful development and deployment in the field

  7. En-Vac Robotic Wall Scabbler. Innovative Technology Summary Report

    International Nuclear Information System (INIS)

    2001-01-01

    The U.S. Department of Energy (DOE) continually seeks safer and more cost-effective technologies for use in decontamination and decommissioning (D and D) of nuclear facilities. To this end, the Deactivation and Decommissioning Focus Area (DDFA) of the DOE's Office of Science and Technology (OST) sponsors Large-Scale Demonstration and Deployment Projects (LSDDP). At these LSDDPs, developers and vendors of improved or innovative technologies showcase products that are potentially beneficial to DOE's projects and to others in the D and D community. Benefits sought include decreased health and safety risks to personnel and the environment, increased productivity, and decreased cost of operation. The Idaho National Engineering and Environmental Laboratory (INEEL) LSDDP generated a list of statements defining specific needs or problems where improved technology could be incorporated into ongoing D and D tasks. One of the stated needs was for a Robotic Wall Scabbler that would reduce costs and shorten schedules in DOE's Decommissioning Project. This demonstration investigated the associated costs and time required to remove paint from the Test Area North (TAN-607) Decontamination Shop walls by comparing the En-vac Robotic Wall Scabbler against the baseline technology. The baseline technologies consist of the Pentek Vac Pac System with the Pentek Rotopeen and Needle Gun hand-held attachments. This system only removes paint from the surface of concrete. Innovative Technology The En-vac Robotic Wall Scabbler is a remote-controlled scabbling unit with individually motor-controlled wheels that moves horizontally and vertically along floors, walls, and ceilings, adhering to the surface with the help of a high-vacuum suction created at its base (see Figures 1 and 2). The complete En-vac Blasting System consists of the En-vac robot, a recycling unit, a filter, and a vacuum unit, and uses an abrasive, steel-grit blasting technology for the scabbling process. By comparison, this

  8. CONTEMPORARY DIGITAL TECHNOLOGIES AND INNOVATIONS IN HUMAN INTELLIGENCE

    Directory of Open Access Journals (Sweden)

    Riabtseva, N.K.

    2017-09-01

    Full Text Available New digital technologies not only “change language” (David Cristal, but also “upgrade” human intelligence making it perform new and uncommon operations. The present paper is an analysis and a survey of most prominent innovations in human intelligence, which are instigated by the latest digital information technologies. These innovations include, according to the point of view of outstanding specialists in contemporary digital technologies, such operations as multitasking, serendipity, connectivity, hypermodality, visuality, and cybersemiotic convergence of objective and virtual reality. The paper is based on the data presented in the publications of such outstanding “digital” specialists as Larry Rosen, Jay David Bolter, Steven Downes, Jay Lemke, Gunther Kress, Soren Brier, etc. In their works they particularly stress the impact of digital technologies and internet communication on all spheres of human activities, their role in the inner psychological and mental states, in professional and educational domain, as well as the importance of their investigation and a gap between the intensive development of digital technologies and their insufficient usage in scientific, didactic, social and cultural life. Special attention in the paper focuses on the tendency towards visualization in the global information flows and its role in information processing and knowledge transfer. The paper particularly stresses the fact that the impact of contemporary digital technologies on all spheres of human activities, including the intellectual one, needs further and profound investigation.

  9. Socio-Environmental and Sustainability Assessment for Technology Innovations at Pectens Production in Brazil

    Directory of Open Access Journals (Sweden)

    Márcio Ricardo Costa dos Santos

    2008-08-01

    Full Text Available This study presents a practical impact assessment method for the adoption of technology innovations at Pectens In vitro Fertilization Laboratory in Rio de Janeiro State, Brazil. To fulfill the system framework requirements, focused on reproductive and productive enterprises, field visits and interview with the laboratory executive director were carried out. Considering the pectens production activities, 24 socio-environmental indicators were developed and the impact indices were automatically calculated by the system’s spreadsheets. General performance index for the pectens reproduction activities indicated an important contribution of technological innovations for the sustainable production of the In vitro Fertilization Laboratory. The employed method was considered as appropriate for evaluations of sustainability at this agribusiness activity, dealing with indicators as tools in order to identify possible risks for negative impacts. Those indicators include aspects beyond those commonly presented by environmental impact assessments, and were capable to provide adequate management and sustainable development for the studied Organization.

  10. DEVELOPING TECHNOLOGICAL INNOVATIONS ON THE BASES OF THE WORLD PATENT INFORMATION

    Directory of Open Access Journals (Sweden)

    N. A. KAMENEVA

    2015-04-01

    Full Text Available To ensure the innovative growth and progressive economic performance in high-technology industries, or at least to keep them at a fixed level it is necessary for the industrial enterprises to conduct scientific research and inventive activities through developing technological innovations and also through supporting, completing, replenishing, updating one of the most important intangible components of the business – patent resources: protective documents on inventions, industrial designs, utility models, trademarks etc. Scientific-and-engineering information, contained in international patent funds, allows determining the world state of the art, registering and securing the company’s exclusive patent rights to the innovations. This work presents the method of obtaining patent information in Russia by means of using various Russian and international databases and abstract journals that can help to investigate the world state of art in a given technological field.

  11. Teaching technological innovation and entrepreneurship in polymeric biomaterials.

    Science.gov (United States)

    Washburn, Newell R

    2011-01-01

    A model for incorporating an entrepreneurship module has been developed in an upper-division and graduate-level engineering elective on Polymeric Biomaterials (27-311/42-311/27-711/42-711) at Carnegie Mellon University. A combination of lectures, assignments, and a team-based project were used to provide students with a framework for applying their technical skills in the development of new technologies and a basic understanding of the issues related to translational research and technology commercialization. The specific approach to the project established in the course, which represented 20% of the students' grades, and the grading rubric for each of the milestones are described along with suggestions for generalizing this approach to different applications of biomaterials or other engineering electives. Incorporating this model of entrepreneurship into electives teaches students course content within the framework of technological innovation and many of the concepts and tools need to practice it. For students with situational or individual interest in the project, it would also serve to deepen their understanding of the traditional course components as well as provide a foundation for integrating technological innovation and lifelong learning. Copyright © 2010 Wiley Periodicals, Inc.

  12. DYNAPHORE, INC., FORAGER SPONGE TECHNOLOGY - INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    The Forager Sponge is a volume reduction technology in which heavy metal contaminants from an aqueous medium are selectively concentrated into a smaller volume for facilitated disposal. he technology treats contaminated groundwater, surface voters and porous waters by absorbing d...

  13. Technology innovation, human resources and dysfunctional integration

    DEFF Research Database (Denmark)

    Madsen, Arne Stjernholm; Ulhøi, John Parm

    2005-01-01

    (Internet technology), which transcends the traditional business of the company in question. It illustrates what goes wrong when innovative human resources do not succeed in becoming integrated into the rest of the host organization and therefore may become trapped by their own passion in a position as self...

  14. Motivating Instructors through Innovative Technology and Pedagogy

    Science.gov (United States)

    Weber, Nicole L.; Barth, Dylan J.

    2016-01-01

    Members of the UWM CETL online and blended faculty development team share innovative technological and pedagogical strategies that they currently utilize to motivate and assist instructors in developing courses for the online or blended environments, and they discuss the lessons learned from incorporating active learning, open content, bring your…

  15. Improvement of the Provisions of Innovative Development of Enterprises Based on Electronic Business Technologies

    Directory of Open Access Journals (Sweden)

    Vilkhivska Olga V.

    2018-02-01

    Full Text Available The article proposes improved conceptual provisions of innovative enterprise development based on the introduction of e-business technologies. The peculiarities of modern conditions of economic development under the influence of the new information paradigm are considered, the essence of which is the development and implementation of innovative network technologies (technologies of e-business in all spheres and branches of the economy. An analysis of the author’s research on the trends in the development of e-business, e-commerce, marketing, the impact of Internet technologies on business practices has been carried out, which has made it possible to achieve the goal, that was set, namely, to improve the conceptual foundations of innovative enterprise development based on e-business technologies. A special feature of the developed provisions is the emphasis on the introduction or full replacement of business processes in the enterprise by the appropriate technologies of electronic business and establishing the relationship between innovation development and their use.

  16. CLUSTER OF INFORMATION TECHNOLOGY (IT IN THE SOUTHWEST OF PARANÁ: PARADIGMATIC CHANGES OF INNOVATION TO THE SOCIAL DIMENSION

    Directory of Open Access Journals (Sweden)

    Rafael Henrique Mainardes Ferreira

    2015-12-01

    Full Text Available This article proposes the analysis of the concepts of innovation and design of the social aspect in the construction of possible models of social perception, contributing to the building of technological knowledge and changes to environmental rationality.. You can see the construction of new ideas and knowledge from the social dimension strongly associated with innovative processes, fostering the development with the construction of a democratic and participatory environmental dynamics. From this analysis, allows itself to be a case study of the Cluster of Information Technology (IT in the southwestern region of Paraná, checking the main axes of social dimension can contribute to regional development. It is realized that contextualization innovation unfolds gradually, providing opportunities new approaches and directions of the central objectives, assuming roles in the development of sustainable processes and environmental constitution, turning the rationality of processes interconnected networks of information technology in a wide scope of complexity allowing evaluation of the main changes in the social and human capital.

  17. Demonstration of innovative monitoring technologies at the Savannah River Integrated Demonstration Site

    Energy Technology Data Exchange (ETDEWEB)

    Rossabi, J. [Westinghouse Savannah River Co., Aiken, SC (United States); Jenkins, R.A.; Wise, M.B. [Oak Ridge National Lab., TN (United States)] [and others

    1993-12-31

    The Department of Energy`s Office of Technology Development initiated an Integrated Demonstration Program at the Savannah River Site in 1989. The objective of this program is to develop, demonstrate, and evaluate innovative technologies that can improve present-day environmental restoration methods. The Integrated Demonstration Program at SRS is entitled ``Cleanup of Organics in Soils and Groundwater at Non-Arid Sites.`` New technologies in the areas of drilling, characterization, monitoring, and remediation are being demonstrated and evaluated for their technical performance and cost effectiveness in comparison with baseline technologies. Present site characterization and monitoring methods are costly, time-consuming, overly invasive, and often imprecise. Better technologies are required to accurately describe the subsurface geophysical and geochemical features of a site and the nature and extent of contamination. More efficient, nonintrusive characterization and monitoring techniques are necessary for understanding and predicting subsurface transport. More reliable procedures are also needed for interpreting monitoring and characterization data. Site characterization and monitoring are key elements in preventing, identifying, and restoring contaminated sites. The remediation of a site cannot be determined without characterization data, and monitoring may be required for 30 years after site closure.

  18. Demonstration of innovative monitoring technologies at the Savannah River Integrated Demonstration Site

    International Nuclear Information System (INIS)

    Rossabi, J.; Jenkins, R.A.; Wise, M.B.

    1993-01-01

    The Department of Energy's Office of Technology Development initiated an Integrated Demonstration Program at the Savannah River Site in 1989. The objective of this program is to develop, demonstrate, and evaluate innovative technologies that can improve present-day environmental restoration methods. The Integrated Demonstration Program at SRS is entitled ''Cleanup of Organics in Soils and Groundwater at Non-Arid Sites.'' New technologies in the areas of drilling, characterization, monitoring, and remediation are being demonstrated and evaluated for their technical performance and cost effectiveness in comparison with baseline technologies. Present site characterization and monitoring methods are costly, time-consuming, overly invasive, and often imprecise. Better technologies are required to accurately describe the subsurface geophysical and geochemical features of a site and the nature and extent of contamination. More efficient, nonintrusive characterization and monitoring techniques are necessary for understanding and predicting subsurface transport. More reliable procedures are also needed for interpreting monitoring and characterization data. Site characterization and monitoring are key elements in preventing, identifying, and restoring contaminated sites. The remediation of a site cannot be determined without characterization data, and monitoring may be required for 30 years after site closure

  19. Innovation in clean coal technologies. Empirical evidence from firm-level patent data

    Energy Technology Data Exchange (ETDEWEB)

    Kruse, Juergen [Koeln Univ. (Germany). Dept. of Economics; Koeln Univ. (Germany). Energiewirtschaftliches Inst.; Wetzel, Heike [Kassel Univ. (Germany). Inst. of Economics

    2016-02-15

    This article empirically analyzes supply-side and demand-side factors expected to a.ect innovation in clean coal technologies. Patent data from 93 national and international patent offices is used to construct new firm-level panel data on 3,648 clean coal innovators over the time period 1978 to 2009. The results indicate that on the supply-side a firm¡¯s history in clean coal patenting and overall propensity to patent positively a.ects clean coal innovation. On the demand-side we find strong evidence that environmental regulation of emissions, that is CO{sub 2}, NO{sub X} and SO{sub 2}, induces innovation in both efficiency improving combustion and after pollution control technologies.

  20. Fuzzy AHP Analysis on Enterprises’ Independent Innovation Capability Evaluation

    Science.gov (United States)

    Zhu, Yu; Lei, Huai-ying

    Independent innovation has become a key factor in the rapid and healthy development of the enterprises. Therefore, an effective and reasonable comprehensive evaluation on the independent innovation capability of the businesses is especially important. This paper applies fuzzy AHP in the evaluation of the independent innovation capability of the businesses, and validates the rationality and feasibility of the evaluation methods and the indicators.

  1. Natural Food: Organizing ‘Responsiveness’ in Responsible Innovation of Food Technology

    NARCIS (Netherlands)

    Haen, Dirk; Sneijder, Petra; te Molder, Hedwig Frederica Maria; Swierstra, Tsjalling; Koops, Bert-Jaap; Oosterlaken, Ilse; Romijn, Henny; Swierstra, Tsjalling; van den Hoven, Jeroen

    2015-01-01

    Responsible innovation requires mutual responsiveness between various stakeholders around technological innovation. But in public engagement exercises, concerns about ethical, cultural and political impacts are too easily set aside, so that no one is actually encouraged to discuss responsibilities

  2. Public health policy decisions on medical innovations: what role can early economic evaluation play?

    Science.gov (United States)

    Hartz, Susanne; John, Jürgen

    2009-02-01

    Our contribution aims to explore the different ways in which early economic data can inform public health policy decisions on new medical technologies. A literature research was conducted to detect methodological contributions covering the health policy perspective. Early economic data on new technologies can support public health policy decisions in several ways. Embedded in horizon scanning and HTA activities, it adds to monitoring and assessment of innovations. It can play a role in the control of technology diffusion by informing coverage and reimbursement decisions as well as the direct public promotion of healthcare technologies, leading to increased efficiency. Major problems include the uncertainty related to economic data at early stages as well as the timing of the evaluation of an innovation. Decision-makers can benefit from the information supplied by early economic data, but the actual use in practice is difficult to determine. Further empirical evidence should be gathered, while the use could be promoted by further standardization.

  3. Do External or Internal Technology Spillovers Have a Stronger Influence on Innovation Efficiency in China?

    Directory of Open Access Journals (Sweden)

    Xionghe Qin

    2017-09-01

    Full Text Available In this study, we bridge an important gap in the literature by comparing the extent to which external technology spillovers, as indicated by foreign direct investment (FDI, and internal technology spillovers, as indicated by university-institute-industry cooperation (UIC, influence innovation efficiency in China. We divide the innovation process into two sequential stages, namely the knowledge creation and technology commercialization stages, and employ a network data envelopment analysis approach to measure innovation efficiency at each stage. The spatial analysis of the distribution of knowledge creation efficiency and technology commercialization efficiency reveals the heterogeneity of innovation efficiency at the provincial level. Then, a panel data regression is used to analyze the effect of FDI and UIC on innovation efficiency at each stage, using data from 2009 to 2015 for 30 provinces in China. By comparing FDI with UIC, we find that FDI has a higher coefficient and stronger significance level at the knowledge creation stage, while only industry-institute linkages exhibit a stronger association with innovation efficiency at the technology commercialization stage.

  4. Business models for maximising the diffusion of technological innovations for climate-smart agriculture

    NARCIS (Netherlands)

    Long, T.B.; Blok, V.; Poldner, Kim

    2017-01-01

    r, CSA technological innovation diffusion is subject to socio-economic barriers. The success of innovations is partly dependent on the business models that are used to diffuse them. Within the context of innovations for CSA, the role that innovation providers’ business models play in the successful

  5. An empirical research on management innovation of high-technology manufacturers

    Directory of Open Access Journals (Sweden)

    Po-Yu Huang

    2015-06-01

    Full Text Available Management innovation is the method with which enterprises acquire competitive advantage over their competitors, especially in current fierce competitive industry environment. Simultaneous importance–performance analysis can be used to simultaneously analyze three concepts of management innovation factors including the importance, self-expression, and the performance of competitors, so that enterprises are able to understand the status of their management innovation capability. Decision-making trial-and-evaluation laboratory is the method for enterprises to process and calculate the level of influence and causality between the indicators and subsequently determine the weight of the indicators. This study developed the 14 management innovation–based assessment indicators to evaluate a management innovation capability. In the first stage, simultaneous importance–performance analysis is used to compare the management innovation capabilities of company A and its competitors. In the second stage, decision-making trial-and-evaluation laboratory is used to analyze the influence and causality between the indicators. Finally, the strategies of management innovation are rebuilt based on the simultaneous importance–performance analysis and decision-making trial-and-evaluation laboratory analysis, which has both theoretical and practical contributions.

  6. Using innovative instructional technology to meet training needs in public health: a design process.

    Science.gov (United States)

    Millery, Mari; Hall, Michelle; Eisman, Joanna; Murrman, Marita

    2014-03-01

    Technology and distance learning can potentially enhance the efficient and effective delivery of continuing education to the public health workforce. Public Health Training Centers collaborate with instructional technology designers to develop innovative, competency-based online learning experiences that meet pressing training needs and promote best practices. We describe one Public Health Training Center's online learning module design process, which consists of five steps: (1) identify training needs and priority competencies; (2) define learning objectives and identify educational challenges; (3) pose hypotheses and explore innovative, technology-based solutions; (4) develop and deploy the educational experience; and (5) evaluate feedback and outcomes to inform continued cycles of revision and improvement. Examples illustrate the model's application. These steps are discussed within the context of design practices in the fields of education, engineering, and public health. They incorporate key strategies from across these fields, including principles of programmatic design familiar to public health professionals, such as backward design. The instructional technology design process we describe provides a structure for the creativity, collaboration, and systematic strategies needed to develop online learning products that address critical training needs for the public health workforce.

  7. ENVIRONMENTAL AND SUSTAINABLE TECHNOLOGY EVALUATION: BIOMASS CO-FIRING IN INDUSTRIAL BOILERS--MINNESOTA POWER'S RAPIDS ENERGY CENTER

    Science.gov (United States)

    The U.S. EPA operates the Environmental and Sustainable Technology Evaluation (ESTE) program to facilitate the deployment of innovative technologies through performance verification and information dissemination. This ESTE project involved evaluation of co-firing common woody bio...

  8. Surveillance and Measurement System (SAMS). Innovative Technology Summary Report

    International Nuclear Information System (INIS)

    2001-01-01

    The United States Department of Energy (DOE) continually seeks safer and more cost-effective technologies for the decontamination and decommissioning (D and D) of nuclear facilities. The Deactivation and Decommissioning Focus Area (DDFA) of the DOE's Office of Science and Technology sponsors large-scale demonstration and deployment projects (LSDDPs) to identify and demonstrate technologies that will be safer and more cost-effective. At these LSDDPs, developers and vendors of improved or innovative technologies showcase products that are potentially beneficial to the DOE's projects as well as others in the D and D community. Benefits sought include decreased health and safety risks to personnel and the environment, increased productivity, and decreased cost of operation. The Idaho National Engineering and Environmental Laboratory (INEEL) LSDDP generated a list of need statements defining specific needs or problems where improved technologies could be incorporated into ongoing D and D tasks. Advances in characterization technologies are continuously being sought to decrease the cost of sampling and increase the speed of obtaining results. Currently it can take as long as 90 days to receive isotopic analysis of radioactive samples from laboratories on soil, liquid, and paint samples. The cost to analyze these types of samples for radionuclides is about $150 per sample. This demonstration investigated the feasibility of using the Surveillance and Measurement System (SAMS) (innovative technology) to make in situ isotopic radiation measurements in paint and soil. Sample collection and on-site laboratory analysis (baseline technology) is currently being used on D and D sampling activities. Benefits expected from using the innovative technology include: Significant decrease in time to receive results on radiological samples; Decrease in cost associated with sample collection, preparation, analysis, and disposal; Equivalent data quality to laboratory analysis; and Fewer

  9. Innovative technologies for recycling contaminated concrete and scrap metal

    International Nuclear Information System (INIS)

    Bossart, S.J.; Moore, J.

    1993-01-01

    Decontamination and decommissioning of US DOE's surplus facilities will generate enormous quantities of concrete and scrap metal. A solicitation was issued, seeking innovative technologies for recycling and reusing these materials. Eight proposals were selected for award. If successfully developed, these technologies will enable DOE to clean its facilities by 2019

  10. Innovative Technologies for Human Exploration: Opportunities for Partnerships and Leveraging Novel Technologies External to NASA

    Science.gov (United States)

    Hay, Jason; Mullins, Carie; Graham, Rachael; Williams-Byrd, Julie; Reeves, John D.

    2011-01-01

    Human spaceflight organizations have ambitious goals for expanding human presence throughout the solar system. To meet these goals, spaceflight organizations have to overcome complex technical challenges for human missions to Mars, Near Earth Asteroids, and other distant celestial bodies. Resolving these challenges requires considerable resources and technological innovations, such as advancements in human health and countermeasures for space environments; self-sustaining habitats; advanced power and propulsion systems; and information technologies. Today, government space agencies seek cooperative endeavors to reduce cost burdens, improve human exploration capabilities, and foster knowledge sharing among human spaceflight organizations. This paper looks at potential opportunities for partnerships and spin-ins from economic sectors outside the space industry. It highlights innovative technologies and breakthrough concepts that could have significant impacts on space exploration and identifies organizations throughout the broader economy that specialize in these technologies.

  11. Science, Technology, and Innovation in Chile | IDRC - International ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Book cover Science, Technology, and Innovation in Chile ... With this in mind, and following a conversation between Canadian Prime Minister Jean Chrétien and ... Call for new OWSD Fellowships for Early Career Women Scientists now open.

  12. Innovative Alternative Technologies to Extract Carotenoids from Microalgae and Seaweeds

    Directory of Open Access Journals (Sweden)

    Mahesha M. Poojary

    2016-11-01

    Full Text Available Marine microalgae and seaweeds (microalgae represent a sustainable source of various bioactive natural carotenoids, including β-carotene, lutein, astaxanthin, zeaxanthin, violaxanthin and fucoxanthin. Recently, the large-scale production of carotenoids from algal sources has gained significant interest with respect to commercial and industrial applications for health, nutrition, and cosmetic applications. Although conventional processing technologies, based on solvent extraction, offer a simple approach to isolating carotenoids, they suffer several, inherent limitations, including low efficiency (extraction yield, selectivity (purity, high solvent consumption, and long treatment times, which have led to advancements in the search for innovative extraction technologies. This comprehensive review summarizes the recent trends in the extraction of carotenoids from microalgae and seaweeds through the assistance of different innovative techniques, such as pulsed electric fields, liquid pressurization, supercritical fluids, subcritical fluids, microwaves, ultrasounds, and high-pressure homogenization. In particular, the review critically analyzes technologies, characteristics, advantages, and shortcomings of the different innovative processes, highlighting the differences in terms of yield, selectivity, and economic and environmental sustainability.

  13. Scenarios of technology and innovation policies in Europe : Investigating future governance

    NARCIS (Netherlands)

    Kuhlmann, Stefan; Edler, Jakob

    2003-01-01

    In Europe, public research, technology and innovation policies are no longer exclusively in the hands of national authorities: increasingly, national initiatives are supplemented by, or even competing with, regional innovation policies or transnational programmes, in particular the activities of the

  14. Science, Technology, and Innovation in Chile | CRDI - Centre de ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Science, Technology, and Innovation in Chile présente les résultats de cette étude. Les lecteurs y trouveront une analyse détaillée des politiques sur les sciences et la technologie du Chili qui part du « système d'innovation national ». On y propose des moyens d'améliorer la coordination du secteur public, des réformes ...

  15. The model of evaluation of innovative potential of enterprise

    Directory of Open Access Journals (Sweden)

    Ганна Ігорівна Заднєпровська

    2015-06-01

    Full Text Available The basic components of the enterprise’s innovative potential evaluation process are investigated. It is offered the conceptual model of evaluation of the innovative potential that includes: subjects, objects, purpose, provision of information, principles, methods, criteria, indicators. It is noted that the innovative capacity characterizes the transition from the current to the strategic level of innovation potential and, thus, characterizes the composition of objects from position of user

  16. On Singularities and Black Holes in Combination-Driven Models of Technological Innovation Networks.

    Directory of Open Access Journals (Sweden)

    Ricard Solé

    Full Text Available It has been suggested that innovations occur mainly by combination: the more inventions accumulate, the higher the probability that new inventions are obtained from previous designs. Additionally, it has been conjectured that the combinatorial nature of innovations naturally leads to a singularity: at some finite time, the number of innovations should diverge. Although these ideas are certainly appealing, no general models have been yet developed to test the conditions under which combinatorial technology should become explosive. Here we present a generalised model of technological evolution that takes into account two major properties: the number of previous technologies needed to create a novel one and how rapidly technology ages. Two different models of combinatorial growth are considered, involving different forms of ageing. When long-range memory is used and thus old inventions are available for novel innovations, singularities can emerge under some conditions with two phases separated by a critical boundary. If the ageing has a characteristic time scale, it is shown that no singularities will be observed. Instead, a "black hole" of old innovations appears and expands in time, making the rate of invention creation slow down into a linear regime.

  17. On Singularities and Black Holes in Combination-Driven Models of Technological Innovation Networks.

    Science.gov (United States)

    Solé, Ricard; Amor, Daniel R; Valverde, Sergi

    2016-01-01

    It has been suggested that innovations occur mainly by combination: the more inventions accumulate, the higher the probability that new inventions are obtained from previous designs. Additionally, it has been conjectured that the combinatorial nature of innovations naturally leads to a singularity: at some finite time, the number of innovations should diverge. Although these ideas are certainly appealing, no general models have been yet developed to test the conditions under which combinatorial technology should become explosive. Here we present a generalised model of technological evolution that takes into account two major properties: the number of previous technologies needed to create a novel one and how rapidly technology ages. Two different models of combinatorial growth are considered, involving different forms of ageing. When long-range memory is used and thus old inventions are available for novel innovations, singularities can emerge under some conditions with two phases separated by a critical boundary. If the ageing has a characteristic time scale, it is shown that no singularities will be observed. Instead, a "black hole" of old innovations appears and expands in time, making the rate of invention creation slow down into a linear regime.

  18. Six phase soil heating. Innovative technology summary report

    International Nuclear Information System (INIS)

    1995-04-01

    Six Phase Soil Heating (SPSH) was developed to remediate soils contaminated with volatile and semi-volatile organic compounds. SPSH is designed to enhance the removal of contaminates from the subsurface during soil vapor extraction. The innovation combines an emerging technology, six-phase electric heating, with a baseline technology, soil vapor extraction, to produce a more efficient in situ remediation systems for difficult soil and/or contaminate applications. This document describes the technology and reports on field demonstrations conducted at Savannah River and the Hanford Reservation

  19. Technological innovation and its effect on public health in the United States

    Science.gov (United States)

    Gill, Preetinder Singh

    2013-01-01

    Background Good public health ensures an efficient work force. Organizations can ensure a prominent position on the global stage by staying on the leading edge of technological development. Public health and technological innovation are vital elements of prosperous economies. It is important to understand how these elements affect each other. This research study explored and described the relationship between these two critical elements/constructs. Methods Indicators representing technological innovation and public health were identified. Indicator data from 2000 to 2009 were collected from various US federal government sources, for the four US Census regions. The four US Census regions were then compared in terms of these indicators. Canonical correlation equations were formulated to identify combinations of the indicators that are strongly related to each other. Additionally, the cause–effect relationship between public health and technological innovation was described using the structural equation modeling technique. Results The four US Census regions ranked differently in terms of both type of indicators in a statistically significant manner. The canonical correlation analysis showed that the first set of canonical variables had a fairly strong relationship, with a magnitude > 0.65 at the 95% confidence interval, for all census regions. Structural equation modeling analysis provided β 12.98, for all census regions. The threshold Student’s t statistic was 1.98. Hence, it was found that the β values were significant at the 95% confidence interval, for all census regions. Discussion The results of the study showed that better technological innovation indicator scores were associated with better public health indicator scores. Furthermore, the study provided preliminary evidence that technological innovation shares causal relation with public health. PMID:23378771

  20. Informing Early-Phase Technology Decisions in Paradigmatic Innovation

    DEFF Research Database (Denmark)

    Jensen, Ole Kjeldal; Ahmed-Kristensen, Saeema

    2010-01-01

    their knowledge-world in such a radical manner, they start facing problems with making efficient decisions as knowledge generated through experience is mainly useful when the future mimics the past, which is not the case for such radical changes. Therefore, a 3 year long research project within this industry has......The innovation activities of a company facing paradigmatic change with regard to both technology and business model includes taking many decisions, where the information available, as well as the decision makers’ ability to understand this information, is limited. Technology decisions in the very...... early phases of innovation have been explored in a Scandinavian energy-utilities company facing exactly these paradigmatic changes. In the company there are 5500 employees, with the major footprint in Denmark. The company has activities in the full energy value-chain including: production & trade of oil...

  1. Understanding University Faculty Perceptions about Innovation in Teaching and Technology

    Science.gov (United States)

    Kopcha, Theodore J.; Rieber, Lloyd P.; Walker, Brandy B.

    2016-01-01

    The purpose of this research is to understand faculty perceptions about innovation in teaching and technology in a college of education in a research-intensive university. This study was motivated by the creation of a new initiative begun in a large college of education at a Carnegie Research-Intensive university to promote innovation in teaching…

  2. Innovative Educational Technology Programs in Low- and Middle-Income Countries

    Science.gov (United States)

    Trucano, Michael

    2017-01-01

    For many people, the use of technology in education constitutes a de facto "innovation." Whether or not this belief is actually accurate, or useful, is a legitimate question for discussion. That said, there is no denying that many of the educational innovations celebrated (or at least touted) today are enabled by the use of such…

  3. NASA Johnson Space Center SBIR STTR Program Technology Innovations

    Science.gov (United States)

    Krishen, Kumar

    2007-01-01

    The Small Business Innovation Research (SBIR) Program increases opportunities for small businesses to participate in research and development (R&D), increases employment, and improves U.S. competitiveness. Specifically the program stimulates U.S. technological innovation by using small businesses to meet federal R&D needs, increasing private-sector commercialization of innovations derived from federal R&D, and fostering and encouraging the participation of socially disadvantaged businesses. In 2000, the Small Business Technology Transfer (STTR) Program extended and strengthened the SBIR Program, increasing its emphasis on pursuing commercial applications by awarding contracts to small business concerns for cooperative R&D with a nonprofit research institution. Modeled after the SBIR Program, STTR is nevertheless a separately funded activity. Technologies that have resulted from the Johnson Space Center SBIR STTR Program include: a device for regenerating iodinated resin beds; laser-assisted in-situ keratomileusis or LASIK; a miniature physiological monitoring device capable of collecting and analyzing a multitude of real-time signals to transmit medical data from remote locations to medical centers for diagnosis and intervention; a new thermal management system for fibers and fabrics giving rise to new line of garments and thermal-enhancing environments; and a highly electropositive material that attracts and retains electronegative particles in water.

  4. Technology innovation in an integrated energy economy

    Energy Technology Data Exchange (ETDEWEB)

    Isaacs, E. [Alberta Energy Research Inst., Edmonton, AB (Canada)

    2006-07-01

    A discussion on technology innovation in an integrated energy economy was presented. The mission, mandate and strategy of the Alberta Research Institute was first presented, followed by a discussion on oil supply needs based on historic demand. The presentation then addressed what might happen as oil demand and supply peak. A comparison of conventional versus unconventional resources was included along with a chart illustrating Alberta's contribution to total global reserves. Other topics addressed in the presentation in chart format included: natural gas requirements and natural gas use in oil sands; marketable gas production and the number of producing gas wells; Alberta's natural gas situation; and net United States imports of natural gas. Options for reducing natural gas consumption in oil sand production processes were also identified. These included steam assisted gravity drainage; solvent processes, electrical heating, combustion, nuclear, geothermal, and gasification processes. Advantages and disadvantages of replacing natural gas through gasification were presented. Last, the presentation provided an unconventional gas technology roadmap and discussed an innovative energy technology program. It was concluded that there are no clear cut options for replacing the huge amount of natural gas needed in the expanding oil sands sector. tabs., figs.

  5. Joint federal initiative for demonstration of on-site innovative technologies

    International Nuclear Information System (INIS)

    Marsh, J.; Munro, J.F.; McKinnon, C.; Coyle, G.J.

    1994-01-01

    The Federal Government needs to develop and implement new technologies to support its environmental and waste management programs. The incentive is threefold: First, new technologies are needed to accomplish many cleanup and waste management tasks. Second, the development and implementation of new technologies is expected to reduce significantly total cleanup costs. Third, the development of new environmental technologies can help secure national economic advantages by making U.S. industry more competitive in terms of global environmental markets. The Federal Advisory Committee to Develop On-Site Innovative Technologies (DOIT) initiative reinvents inter-governmental relations by stressing the solving of environmental problems through partnerships rather than through confrontation. This overview -- which is essentially a shortened and slightly modified version of the recent Coordinating Group Report to the DOIT Committee --describes the waste management challenges facing the Nation, discusses the innovative solutions offered by DOIT, outlines progress of the initiative to date, and identifies critical next steps

  6. Behind the development of technology: The transition of innovation modes in China’s wind turbine manufacturing industry

    International Nuclear Information System (INIS)

    Ru Peng; Zhi Qiang; Zhang Fang; Zhong Xiaotian; Li Jianqiang; Su Jun

    2012-01-01

    The market scale of China’s wind turbine manufacturing industry has grown immensely. Despite China still having a limited capacity in terms of technology innovation, the institutional support has promoted the technology capability development of the wind turbine manufacturing industry. This paper explores the driving forces underlying this development by reviewing the transition of the innovation modes and the dynamic interactions among the technology capability, innovation modes, market formation, and wind energy policy. The innovation mode in China began with imitative innovation, then transitioned to cooperative innovation, and has more recently set its sights on attaining truly indigenous innovation. Public policy serves as a key driving force for the evolution of innovation modes, as well as the development of the market. The policy focus has evolved in the following sequence: 1. building the foundation for technological innovation; 2. encouraging technology transfer; 3. enhancing local R and D and manufacturing capabilities; 4. enlarging the domestic market; and 5. cultivating an open environment for global competition and sustainable market development in China. - Highlights: ► New data were provided for China’s wind turbine manufacturing industry. ► The transition of innovation modes in the industry is reviewed. ► The interaction among the technology, market, policy, and innovation mode is explored. ► Public policies are the key driving forces for the transition.

  7. SOCIAL SCIENCE CONTRIBUTIONS TO DISCUSSIONS AFFECT THE SCIENCE, TECHNOLOGY AND INNOVATION

    Directory of Open Access Journals (Sweden)

    Renato Santiago Quintal

    2015-04-01

    Full Text Available In its origins, the social sciences have focused on technological issues. Social scientists have devoted much attention to the subject affects the action of technological progress on the conformation of human life in General, as well as keeping an eye on more concreteness about the aspects related to the way the technique is acquired, the ways employed to protect her and the tools used to Exchange and protection. In this context, the article aims to identify the contributions of social sciences-notably of the applied social sciences-to discussions involving science, technology and innovation. The survey used the inductive method, applied to the literature review. The findings point to multidisciplinarity of significant thematic affects to science, technology and innovation. Keywords: Scientific knowledge; Social Sciences; Technology and society.

  8. AFSPC Innovation and Science and Technology Outreach to Industry and Academia

    Science.gov (United States)

    Sanchez, Merri J.; Dills, Anthony N.; Chandler, Faith

    2016-01-01

    The U.S. Air Force is taking a strategic approach to ensuring that we are at the cutting edge of science and technology. This includes fostering game-changing approaches and technologies that are balanced with operational needs. The security of the Nation requires a constant pursuit of science, technical agility, and a rapid adoption of innovation. This includes pursuits of game-changing technologies and domains that perhaps we cannot even imagine today. This paper highlights the Air Force Space Command (AFSPC) collaboration and outreach to other government agencies, military and national laboratories, industry, and academia on long term science and technology challenges. In particular we discuss the development of the AFSPC Long Term Science and Technology Challenges that include both space and cyberspace operations within a multi-domain environment and the subsequent Innovation Summits.

  9. Aerospace Technology Innovation. Volume 10

    Science.gov (United States)

    Turner, Janelle (Editor); Cousins, Liz (Editor); Bennett, Evonne (Editor); Vendette, Joel (Editor); West, Kenyon (Editor)

    2002-01-01

    Whether finding new applications for existing NASA technologies or developing unique marketing strategies to demonstrate them, NASA's offices are committed to identifying unique partnering opportunities. Through their efforts NASA leverages resources through joint research and development, and gains new insight into the core areas relevant to all NASA field centers. One of the most satisfying aspects of my job comes when I learn of a mission-driven technology that can be spun-off to touch the lives of everyday people. NASA's New Partnerships in Medical Diagnostic Imaging is one such initiative. Not only does it promise to provide greater dividends for the country's investment in aerospace research, but also to enhance the American quality of life. This issue of Innovation highlights the new NASA-sponsored initiative in medical imaging. Early in 2001, NASA announced the launch of the New Partnerships in Medical Diagnostic Imaging initiative to promote the partnership and commercialization of NASA technologies in the medical imaging industry. NASA and the medical imaging industry share a number of crosscutting technologies in areas such as high-performance detectors and image-processing tools. Many of the opportunities for joint development and technology transfer to the medical imaging market also hold the promise for future spin back to NASA.

  10. Assessment and evaluation of technologies for environmental restoration. Progress report

    Energy Technology Data Exchange (ETDEWEB)

    Uzochukwu, G. A. [North Carolina A and T State Univ., Greensboro, NC (United States)

    2000-06-30

    Nuclear and commercial non-nuclear technologies that have the potential of meeting the environmental restoration objectives of the Department of Energy are being evaluated. A detailed comparison of innovative technologies available will be performed to determine the safest and most economical technology for meeting these objectives. Information derived from this effort will be matched with the multi-objective of the environmental restoration effort to ensure that the best, most economical, and the safest technologies are used in decision making at USDOE-SRS. Technology-related variables will be developed and the resulting data formatted and computerized for multimedia systems. The multimedia system will be made available to technology developers and evaluators to ensure that the safest and most economical technologies are developed for use at SRS and other DOE sites.

  11. Assessment and evaluation of technologies for environmental restoration. Progress report

    International Nuclear Information System (INIS)

    Uzochukwu, G. A.

    2000-01-01

    Nuclear and commercial non-nuclear technologies that have the potential of meeting the environmental restoration objectives of the Department of Energy are being evaluated. A detailed comparison of innovative technologies available will be performed to determine the safest and most economical technology for meeting these objectives. Information derived from this effort will be matched with the multi-objective of the environmental restoration effort to ensure that the best, most economical, and the safest technologies are used in decision making at USDOE-SRS. Technology-related variables will be developed and the resulting data formatted and computerized for multimedia systems. The multimedia system will be made available to technology developers and evaluators to ensure that the safest and most economical technologies are developed for use at SRS and other DOE sites.

  12. Assessment and evaluation of technologies for environmental restoration. Progress report

    International Nuclear Information System (INIS)

    Uzochukwu, G.A.

    1999-01-01

    Nuclear and commercial non-nuclear technologies that have the potential of meeting the environmental restoration objectives of the Department of Energy are being evaluated. A detailed comparison of innovative technologies available will be performed to determine the safest and most economical technology for meeting these objectives. Information derived from this effort will be matched with the multi-objective of the environmental restoration effort to ensure that the best, most economical, and the safest technologies are used in decision making at USDOE-SRS. Technology-related variables will be developed and the resulting data formatted and computerized for multimedia systems. The multimedia system will be made available to technology developers and evaluators to ensure that the safest and most economical technologies are developed for use at SRS and other DOE sites

  13. 75 FR 28782 - Extension of Period for Nominations to the National Medal of Technology and Innovation Nomination...

    Science.gov (United States)

    2010-05-24

    ... honor for technological innovation, awarded annually by the President of the United States. Members of... innovation and/or be familiar with the education, training, employment and management of technological... Innovation; Technological Manpower/Workforce Training/Education. Committee members generally are Chief...

  14. Absorptive capacity, technological innovation, and product life cycle: a system dynamics model.

    Science.gov (United States)

    Zou, Bo; Guo, Feng; Guo, Jinyu

    2016-01-01

    While past research has recognized the importance of the dynamic nature of absorptive capacity, there is limited knowledge on how to generate a fair and comprehensive analytical framework. Based on interviews with 24 Chinese firms, this study develops a system-dynamics model that incorporates an important feedback loop among absorptive capacity, technological innovation, and product life cycle (PLC). The simulation results reveal that (1) PLC affects the dynamic process of absorptive capacity; (2) the absorptive capacity of a firm peaks in the growth stage of PLC, and (3) the market demand at different PLC stages is the main driving force in firms' technological innovations. This study also explores a sensitivity simulation using the variables of (1) time spent in founding an external knowledge network, (2) research and development period, and (3) knowledge diversity. The sensitivity simulation results show that the changes of these three variables have a greater impact on absorptive capacity and technological innovation during growth and maturity stages than in the introduction and declining stages of PLC. We provide suggestions on how firms can adjust management policies to improve their absorptive capacity and technological innovation performance during different PLC stages.

  15. Structured Innovation of High-Performance Wave Energy Converter Technology: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Weber, Jochem W. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Laird, Daniel [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2018-01-25

    Wave energy converter (WEC) technology development has not yet delivered the desired commercial maturity nor, and more importantly, the techno-economic performance. The reasons for this have been recognized and fundamental requirements for successful WEC technology development have been identified. This paper describes a multi-year project pursued in collaboration by the National Renewable Energy Laboratory and Sandia National Laboratories to innovate and develop new WEC technology. It specifies the project strategy, shows how this differs from the state-of-the-art approach and presents some early project results. Based on the specification of fundamental functional requirements of WEC technology, structured innovation and systemic problem solving methodologies are applied to invent and identify new WEC technology concepts. Using Technology Performance Levels (TPL) as an assessment metric of the techno-economic performance potential, high performance technology concepts are identified and selected for further development. System performance is numerically modelled and optimized and key performance aspects are empirically validated. The project deliverables are WEC technology specifications of high techno-economic performance technologies of TPL 7 or higher at TRL 3 with some key technology challenges investigated at higher TRL. These wave energy converter technology specifications will be made available to industry for further, full development and commercialisation (TRL 4 - TRL 9).

  16. Managing Innovation in Small High-Technology Firms: A Case Study in Brazil

    Directory of Open Access Journals (Sweden)

    Mauricio Uriona Maldonado

    2009-07-01

    Full Text Available Evaluating innovation competence and practices is a significant and complex issue for many contemporary organizations and it presents itself as a challenge for forthcoming initiatives. In this article, we present the case study of a small high-technology firm. Cianet Networking is a digital communication solutions manufacturer in Brazil that went through the implementation of an innovation management assessment system. This article reports the challenges the firm faced through the diagnosing/benchmarking and action plan proposal phases as well as the challenges facing the implementation phase. This system helped the firm to understand their strengths and weaknesses as well as to establish action plans in order to achieve higher performance. Since the beginning of the implementation, the results have corroborated the firm´s positive operational outcomes.

  17. Collaboration for Technological Innovation: Choices and Decisions that Make Partnerships Excel

    Directory of Open Access Journals (Sweden)

    Sonia Regina Mangiavacchi Tuccori

    2014-07-01

    Full Text Available The purpose of this paper is to understand the relationship between strategies and collaborative organizational arrangements and the defining of their position within the corporate power structure. The strategic approach employed herein is that of case studies so as to comprehend the peculiarities and the value proposition of the management model of innovation networks at a Brazilian company that operates in the personal hygiene, perfumery and cosmetics segment. To excel within an environment marked by increased global competition, companies have to develop and learn with an innovative work structure and culture. This derives from the rapid shortening of product life cycles which drives the need to innovate at more frequent intervals and to develop technologies, processes, products and/or services more efficiently. Furthermore, given increased product, technologies and processes complexity, attention is drawn to the expansion of costs and risks to innovate to the extent of enhancing uncertainties and pressure on R&D+i (Research, Development and Innovation budgets. Meanwhile, the need for interdisciplinarity by means of cooperation likewise comes to light.

  18. Frozen soil barrier technology. Innovative technology summary report

    International Nuclear Information System (INIS)

    1995-04-01

    The technology of using refrigeration to freeze soils has been employed in large-scale engineering projects for a number of years. This technology bonds soils to give load-bearing strength during construction; to seal tunnels, mine shafts, and other subsurface structures against flooding from groundwater; and to stabilize soils during excavation. Examples of modern applications include several large subway, highway, and water supply tunnels. Ground freezing to form subsurface frozen soil barriers is an innovative technology designed to contain hazardous and radioactive contaminants in soils and groundwater. Frozen soil barriers that provide complete containment (open-quotes Vclose quotesconfiguration) are formed by drilling and installing refrigerant piping (on 8-ft centers) horizontally at approximately 45 degrees angles for sides and vertically for ends and then recirculating an environmentally safe refrigerant solution through the piping to freeze the soil porewater. Freeze plants are used to keep the containment structure at subfreezing temperatures. A full-scale containment structure was demonstrated from May 12 to October 10, 1994, at a nonhazardous site on SEG property on Gallaher Road, Oak Ridge, Tennessee

  19. Technology Licensing and Firm Innovation

    DEFF Research Database (Denmark)

    Moreira, Solon

    acquisition. The findings indicate that technology licensing is positively related to the number of inventions produced by the licensee in the years subsequent to the licensing deal. Subsequently, I investigate the moderating effect that organizational slack and myopia have on this main relationship....... The findings also suggest that high levels of Organizational Slack (available financial resources) strengthen the positive effect of licensing on innovation. However, higher levels of Organizational Myopia (the extent to which a firm draws on its own knowledge) can decrease the main effect of licensing....

  20. [Analysis of medical cost of atlantoaxial disorders in patients receiving innovated treatment technologies].

    Science.gov (United States)

    Wu, Yunxia; Liu, Zhongjun

    2016-01-19

    To explore the effects of innovated technologies and products on improving outcomes and decreasing medical costs by analyzing a total and subtotal medical costs of patients with atlantoaxial disorders. The medical costs of 1 489 patients with atlantoaxial disorders from Peking University Third Hospital from 2005 to 2014, who received innovated technologies and products treatment were retrospectively analyzed and compared.Descriptive analysis and ANOVA were used for statistical analysis, and SPSS 19.0 was used to analyze data. From 2005 to 2014, under the situation of a general increase in medical cost by 327%, the total medical costs were stable for patients who used innovated technologies and products for treatment, fluctuating from 20 851 in 2005 to 20 878 in 2014; however, the cases of operation increased year by year, from 88 in 2005 to 163 in 2014; the average length of stay decreased from 21 in 2005 to 10 in 2014; the total cases of transfusion were 22 from 2005 to 2014; the safety, stability and feasibility of the innovated technologies and products were illustrated through the decrease of average length of stay, the reduction of bleeding and the significance of outcomes. It is illustrated that the innovated technologies and products not only decrease patients' suffering and medical costs but also are safe, stable and feasible.

  1. Innovation Policy Evaluation – Challenges and Roads Ahead

    DEFF Research Database (Denmark)

    Christensen, Jesper Lindgaard

    2012-01-01

    Prior Work A vital development of innovation policies as well as innovation theories over the past couple of decades is the increased focus upon collaboration and networking between actors. It is, however, difficult to evaluate such activities with traditional evaluation metrics. The literature o...

  2. A patent survey case: how could technological forecasting help cosmetic chemists with product innovation?

    Science.gov (United States)

    Domicio Da Silva Souza, Ivan; Juliana Pinheiro, Bárbara; Passarini Takahashi, Vania

    2012-01-01

    Patents represent a free and open source of data for studying innovation and forecasting technological trends. Thus, we suggest that new discussions about the role of patent information are needed. To illustrate the relevance of this issue, we performed a survey of patents involving skin care products, which were granted by the United States Patent and Trademark Office (USPTO) between 2006 and 2010, to identify opportunities for innovation and technological trends. We quantified the use of technologies in 333 patents. We plotted a life cycle of technologies related to natural ingredients. We also determined the cross impact of the technologies identified. We observed technologies related to processes applied to cosmetics (2.2%), functional packaging and applicators (2.9%), excipients and active compounds (21.5%), and cosmetic preparations (73.5%). Further, 21.6% of the patents were related to the use of natural ingredients. Several opportunities for innovation were discussed throughout this paper, for example, the use of peptides as active compounds or intracellular carriers (only 3.9% of the technologies in cosmetic preparations). We also observed technological cross impacts that suggested a trend toward multifunctional cosmetics, among others. Patent surveys may help researchers with product innovation because they allow us to identify available and unexplored technologies and turn them into whole new concepts.

  3. CAXIAS DO SUL TECHNOLOGY INCUBATOR: TECHNOLOGICAL INNOVATION THROUGH THE TRIPLE HELIX

    Directory of Open Access Journals (Sweden)

    Priscila Bresolin Tisott

    2014-09-01

    on investment in the form of registered patents, attracting new students and recognition as a technological, entrepreneurial and innovative university. The perceived benefits for the industrial sector are training and development for businesses and entrepreneurs, while the municipal government perceives the reduced number of businesses failing and the financial returns, in the form of taxes, as benefits. The findings show that the Triple Helix concept developed by Etzkowitz (2009 plays a cooperative and participatory role in the Technology Incubator, even though it could be applied to more segments of society.

  4. METHODOLOGY TO EVALUATE THE INNOVATIVE ACTIVITY OF THE MEAT INDUSTRY

    Directory of Open Access Journals (Sweden)

    D. N. Bakaev

    2014-01-01

    Full Text Available The article considers the methods of estimation of innovative activity of the enterprise. Revealed advantages and disadvantages of the proposed techniques in various publications, devoted to the innovative development. Analysis of the works of domestic and foreign authors showed that the existing methods do not provide an adequate assessment of innovative activity of the enterprise. Asked to enter the integral indicator of innovative activity, which is the criterion of the dynamism of innovative activity of the enterprise, as measured by the speed and volume creation, promotion and use of innovations in economic activity of the enterprise. The proposed system of estimation of innovative activity of the enterprise is based on the following indicators: the ratio of personnel development, the growth rate of financial assets directed on conducting innovative activity of the enterprise, the coefficient for mastering new technologies, the growth rate of intellectual property. The assessment matrix integral indicator of innovative activity of the enterprise reflects the relationship of the indicators of innovative potential and innovative activity and includes a group of indicators, which allows the estimation of innovative activity of enterprises in various spheres of business: technological, organizational, marketing. The main advantages of the developed technique of estimation of level of innovative development of the enterprises of the meat industry is: an assessment of the level in dynamics; complex research of a level of innovation development; the possibility of comparison of actual values with the values of the indicators, assessments United experts. A feature of the proposed method is not only able to measure the level of innovation development in General, but diagnosis of individual factors. This allows you to determine which factors-the Torah must be activated to display the meat industry to a higher level of innovation development.

  5. EVALUATION OF THE IMPACT OF INNOVATIVE PROJECTS ON THE COMPETITIVENESS OF AGRICULTURAL HOLDINGS IN SLOVAK REPUBLIC

    Directory of Open Access Journals (Sweden)

    Ľubica RUMANOVSKÁ

    2013-01-01

    Full Text Available The scientific paper evaluates the impact of innovative projects on the competitiveness of agricultural holdings in SR. Evaluation of the impact of innovative projects on competitiveness of agricultural holdings was realized on the selected holdings in Nitra and Trnava region. For the evaluation was used RCR coefficient. With the use of RCR coefficient could be confirmed the scientific hypothesis - The innovative projects realized through Program for rural development SR 2007-2013 have positive impact on competitiveness of agricultural holdings. The possibilities for EU financial support for innovative projects in SR represent important source for introduction of new innovative technologies into production process and in future they can significantly contribute to the growth of competitiveness of agricultural subjects. Therefore, to increase competitiveness of agricultural holdings it is important to focus on modernization of machinery and buildings, use of natural sources for energy production, but also to increase the education and the flow of information between rural inhabitants, mainly farmers. In competitive area of EU agricultural sector it is necessary that agricultural holdings will innovate, not only to create independent flow of innovative products and knowledge, but also to increase its value on internal market. Agricultural holdings –receivers of financial support – have expressed the opinion that financial support realized through PRD SR 2007-2013 had definitely allowed them to implement new processes and products.

  6. The Future of the Space Age or how to Evaluate Innovative Ideas

    Science.gov (United States)

    Vollerthun, A.; Fricke, E.

    2002-05-01

    Based on an initiative of the German Aerospace Industry Association to foster a more transparent and structured funding of German commercial-oriented space projects a three-phased approach is suggested in this paper, to stepwise improve and evaluate proposed concepts for space-related innovations. The objective of this concept was to develop a transparent, structured, and reproducible process to select the right innovative project in terms of political, economical, and technical objectives for funding by e.g. a governmental agency. A stepwise process and related methods, that cover technical as well as economical aspects (and related sensitivities) are proposed. Based on the special needs and requirements of space industry the proposals are compared to a set of predefined top level objectives/requirements. Using an initial trades analysis with the criteria company, technology, product, and market, an initial business case is analyzed. The alternative innovative concepts are in the third process step subject to a very detailed analysis. The full economical and technical scale of the projects is evaluated and metrics for e.g. the 'Return on Investment' or 'Break Even Point' are determined, to compare the various innovations. Risks related to time, cost, and quality are considered, when performing sensitivity analysis by varying the most important factors of the project. Before discussing critical aspects of the proposed process, space-related examples will be presented to show how the process could be applied, and how different concepts should be evaluated.

  7. The industrial research project: “Blu-Archeosys – Innovative Technologies and Advanced Systems as Support in Underwater Archaeology”

    Directory of Open Access Journals (Sweden)

    Salvatore Lorusso

    2003-02-01

    Full Text Available The reasons of the research about new technologies as support in naval and underwater archaeology or, more generally, in waters archaeology are various and described in this work, where the characteristics of the research project “BLU-ARCHEOSYS – Innovative Technologies and Advanced SYStems as Support in Underwater ARCHaeology” are illustrated. This industrial research project faces problems regarding innovative technologies and instruments in waters archaeology and it comprehends synergic steps and joined works among skilled professionals that have the competences to interpret qualitative and/or quantitative data within an artistic – historical and technical – historical study, also with the involvement of various public and private institutions. The BLUARCHEOSYS project has, in fact, the objective to create technologies that have a reply in underwater archaeology and contemporaneously in other sectors. In particular, starting from the methodological way that spans from the discovery in underwater or subaerial environment to the collocation of the objects in museums, the intent is to support the different methodological stages with specific tools and innovative technologies. The education project, presented to the Ministry with the research one, is articulated in the different branches of artistic-historical character, of the management, normative and operative character, and of the technical-diagnostic-material-preservative character. The professionals will have not only theoretical knowledge about standard and consolidated technologies, but they will be also experts about methodologies, in particular the diagnostic ones, that put in field the innovative tools evaluated in the project, with consequent competitive advantage in the working field, more and more demanding specific sector competences.

  8. Development models and technological innovation. A conservative revolution

    Directory of Open Access Journals (Sweden)

    Carla Gras

    2016-12-01

    Full Text Available In Argentina, innovations related to biotechnologies were rapidly adopted while initially there was an absence of a large social debate. To understand this absence, the institutional framework which legitimized technological innovations must be addressed. This framework was undoubtedly one of the conditions of success of the dissemination of the agribusiness model. It´s unfolding also evidences the restructuring of local rural dominant classes that led to the emergency of new social actors. These were the “innovators” gathered in the Argentine Association of No-Tilling Farmers (or AAPRESID.  Here, we analyze how innovations were introduced and legitimated in Argentina. In contrast to what AAPRESID has termed as a “paradigmatic revolution”, we will characterize the introduction of biotechnologies in Argentine agriculture as a “conservative revolution”.

  9. Innovative Technological Development of Russian Mining Regions (on Example of Kemerovo Region)

    Science.gov (United States)

    Shavina, Evgeniya; Kalenov, Oleg

    2017-11-01

    A characteristic trend of many countries modern development is the transition to an innovative economy. At present, this is the only opportunity to secure and maintain a high standard of living for the population. Moreover, innovative development of Russian can be achieved during technological progress in its regions. In this regard, it is necessary to assess the innovative potential of the region and identify the most actual problems that impede the transition to the trajectory of innovative development. The authors outline several main indicators that help to determine the level of innovation and technological development of one of the largest industrial areas of Russia - Kemerovo region. The special economic role of Kemerovo region as a large territorial old-industrial complex of Western Siberia requires a large-scale work to solve the most acute problems of regional development. It is necessary to find the answer for existing problems through the implementation of a system of state regulation aimed at making the innovation component a leading factor of the regional economy competitiveness.

  10. Spaces of the possible: universal Darwinism and the wall between technological and biological innovation

    Science.gov (United States)

    Wagner, Andreas; Rosen, William

    2014-01-01

    Innovations in biological evolution and in technology have many common features. Some of them involve similar processes, such as trial and error and horizontal information transfer. Others describe analogous outcomes such as multiple independent origins of similar innovations. Yet others display similar temporal patterns such as episodic bursts of change separated by periods of stasis. We review nine such commonalities, and propose that the mathematical concept of a space of innovations, discoveries or designs can help explain them. This concept can also help demolish a persistent conceptual wall between technological and biological innovation. PMID:24850903

  11. Success probability orientated optimization model for resource allocation of the technological innovation multi-project system

    Institute of Scientific and Technical Information of China (English)

    Weixu Dai; Weiwei Wu; Bo Yu; Yunhao Zhu

    2016-01-01

    A success probability orientated optimization model for resource al ocation of the technological innovation multi-project system is studied. Based on the definition of the technological in-novation multi-project system, the leveling optimization of cost and success probability is set as the objective of resource al ocation. The cost function and the probability function of the optimization model are constructed. Then the objective function of the model is constructed and the solving process is explained. The model is applied to the resource al ocation of an enterprise’s technological innovation multi-project system. The results show that the pro-posed model is more effective in rational resource al ocation, and is more applicable in maximizing the utility of the technological innovation multi-project system.

  12. Implications of Frugal Innovations on Sustainable Development: Evaluating Water and Energy Innovations

    Directory of Open Access Journals (Sweden)

    Jarkko Levänen

    2015-12-01

    Full Text Available Frugal innovations are often associated with sustainable development. These connections, however, are based on anecdotal assumptions rather than empirical evidence. This article evaluates the sustainability of four frugal innovations from water and energy sectors. For the purposes of the evaluation, a set of indicators was developed. Indicators are drawn from sustainable development goals by the United Nations and they encompass central dimensions of sustainability: ecological, social and economic. In this article, frugal innovations are compared to solutions that are currently used in similar low-income contexts. Studied frugal innovations were found more sustainable in terms of energy production and water purification capacity than the existing solutions. In terms of social sustainability, larger differences between innovations were found. For example, business models of frugal energy solutions focus on capacity building and the inclusion of marginalized low-income people, whereas business models of water purification solutions focus on more traditional corporate social responsibility activities, such as marketing awareness campaigns and cooperation with non-governmental organizations. Three major sustainability challenges for frugal innovators were identified: (1 the proper integration of material efficiency into product or service systems; (2 the patient promotion of inclusive employment; and (3 the promotion of inclusive and sustainable local industrialization. The article concludes that despite indisputable similarities between frugality and sustainability, it is problematic to equate the two conceptually.

  13. Innovation and Competition: Conflicts over Intellectual Property Rights in New Technologies.

    Science.gov (United States)

    Samuelson, Pamela

    1987-01-01

    Addresses conditions and concerns involved in accommodating the interests of both innovators of new technologies and the general public. Discusses the tension that exists in intellectual property law between innovators and competitors. Focuses on cases dealing with computer software and semiconductor chip designs, genetically-engineered life…

  14. Combining expedited cleanup with innovative technology demonstrations

    International Nuclear Information System (INIS)

    Hagood, M.C.; Rohay, V.J.; Valcich, P.J.; Brouns, T.M.; Cameron, R.J.

    1993-04-01

    A Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA) expedited response action (ERA) has been initiated at the Hanford Site, Washington, for the removal of carbon tetrachloride from contaminated soils to mitigate further contamination of the groundwater. Soil vapor extraction with aboveground collection and treatment was chosen as the preferred remedial technology for the first phase of the ERA. At the same time, innovative technology demonstrations are being conducted in coordination with the ERA to determine the viability of emerging technologies that can be used to characterize, remediate, and monitor carbon tetrachloride and cocontaminants. The overall goal is to improve the performance and decrease the costs of carbon tetrachloride remediation while maintaining a safe working environment

  15. Knowledge sharing and innovation in relationships interorganizational type of information technology outsourcing

    OpenAIRE

    Roberta Rodrigues Faoro; Mírian Oliveira; Marcelo Faoro de Abreu

    2017-01-01

    Introduction: this paper presents an analysis of the sharing of knowledge and innovation in the inter-relationships of the type outsourcing of Information Technology. Objective: analyze the existence of relationship between knowledge sharing and innovation in the inter-relationships of the type of outsourcing information technology (IT). Methodology: research is exploratory, qualitative and using as a strategy the multiple case study, which analyzed 12 companies in IT outsourci...

  16. International Relations, New Technology, and Adaptation of the Military Innovation: Focusing on the Case of the Aircraft Carrier Innovation of the Imperial Japanese Navy During the Interwar Period

    Science.gov (United States)

    2017-12-01

    RELATIONS, NEW TECHNOLOGY , AND ADAPTATION OF THE MILITARY INNOVATION: FOCUSING ON THE CASE OF THE AIRCRAFT CARRIER INNOVATION OF THE IMPERIAL JAPANESE...Master’s thesis 4. TITLE AND SUBTITLE INTERNATIONAL RELATIONS, NEW TECHNOLOGY , AND ADAPTATION OF THE MILITARY INNOVATION: FOCUSING ON THE CASE OF THE...impacted the Japanese aircraft carrier and aircraft innovation during the interwar period. The study found that technology , international relations

  17. Adoption of innovative production technologies in the road construction industry

    NARCIS (Netherlands)

    Habets, M.J.M.; van der Sijde, Peter; Voordijk, Johannes T.

    2007-01-01

    New procurement methods encourage the adoption of innovative production technologies. This triggers the need for entrepreneurship in the construction industry. The purpose of this study is to provide insights into the adoption processes of a particular set of new production technologies in the Dutch

  18. Science, technology and innovation policies for development the Latin American experience

    CERN Document Server

    Dutrénit, Gabriela

    2014-01-01

    This book examines the implementation of science, technology and innovation (STI) policy in eight Latin American countries and the different paths these policies have taken. It provides empirical evidence to examine the extent to which STI policies are contributing to the development of the region, as well as to the solution of market failures and the stimulus of the region’s innovation systems. Since the pioneering work of Solow (1957), it has been recognized that innovation is critical for economic growth both in developed and in less-developed countries. Unfortunately Latin America lags behind world trends, and although over the last 20 years the region has established a more stable and certain macroeconomic regime, it is also clear that these changes have not been enough to trigger a process of innovation and productivity to catch-up. Against this rather grim scenario there is some optimism emerging throughout the region. After many years of inaction the region has begun to invest in science, technology...

  19. Technical innovation and management

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, Yang Cheol

    1982-08-15

    This book gives explanations of the conception of technical innovation, development plan in Korea, connection between technology and a growth factor in national income, problem of technical innovation in developing country, analysis on cooperation between a developed country and a developing country, evaluation and strategy of technical development in Korea, technical innovation of industry, management of technical industry, analysis of special condition in Korea.

  20. Technical innovation and management

    International Nuclear Information System (INIS)

    Yoon, Yang Cheol

    1982-08-01

    This book gives explanations of the conception of technical innovation, development plan in Korea, connection between technology and a growth factor in national income, problem of technical innovation in developing country, analysis on cooperation between a developed country and a developing country, evaluation and strategy of technical development in Korea, technical innovation of industry, management of technical industry, analysis of special condition in Korea.

  1. J.R. SIMPLOT EX-SITU BIOREMEDIATION TECHNOLOGY FOR TREATMENT OF TNT-CONTAMINATED SOILS - INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    This report summarizes the findings of the second evaluation of the J.R. Simplot Ex-situ Bioremediation Technology also known as the Simplot Anaerobic Bioremediation (SABRE™) process. This technology was developed by the J.R. Simplot Company to biologically degrade nitroaromatic...

  2. Science, Technology and Innovation: Concepts, Theory and Policy

    OpenAIRE

    Zehra Taşkın; Güleda Doğan

    2016-01-01

    This study is a review of the book entitled “Science, Technology and Innovation: Concepts, Theory and Policy”. In the converging world, the book is an important contribution not only for the field of economy, but also information science which includes information-economy concepts.

  3. Innovative technologies for greenhouse gas emission reduction in steel production

    Directory of Open Access Journals (Sweden)

    D. Burchart-Korol

    2016-01-01

    Full Text Available The main goal of the study was to present the most significant technological innovations aiming at reduction of greenhouse gas emission in steel production. Reduction of greenhouse gas and dust pollution is a very important aspect in the iron and steel industry. New solutions are constantly being searched for to reduce greenhouse gases (GHG. The article presents the most recent innovative technologies which may be applied in the steel industry in order to limit the emission of GHG. The significance of CCS (CO2 Capture and Storage and CCU (CO2 Capture and Utilization in the steel industry are also discussed.

  4. Linking unlearning with innovation through organizational memory and technology

    OpenAIRE

    Jiménez Jiménez, Daniel; Cepeda Carrión, Gabriel; Cegarra Navarro, Juan Gabriel

    2010-01-01

    While the information technologies provide organizational members with explicit concepts, such as writing instruction manuals, the ‘organizational memory’ provides individuals with tacit knowledge, such as systematic sets, routines and shared visions. This means that individuals within an organization learn by using both the organizational memory and the information technologies. They interact to reduce organizational information needs contributing to improve organizational innovativeness....

  5. МЕTHODOLOGICAL APPROACHES TO EVALUATION OF OPERATION OF INNOVATION INFRASTRUCTURE ENTITIES

    Directory of Open Access Journals (Sweden)

    E. V. Korolyova

    2010-01-01

    Full Text Available Innovation infrastructure entities (IIEs have become a new social institution which regulates relations between all stakeholders involved in the technology R&D and introduction process and decrease transaction costs on information dissemination and decision-making. While making IIE efficiency evaluation it is necessary to take into account the following: from one side, an influence of the given entity on the activity of scientific and educational institutions, innovative enterprises, investors, and, from the other side, IIE is to be considered as an institution that influences on  social and economic and political processes in the country and correspondingly is subjected to reverse influence of some institutions and economic system as a whole.

  6. Building new competencies for new business creation based on breakthrough technological innovations

    OpenAIRE

    Vanhaverbeke, W.P.M.; Kirschbaum, R.

    2003-01-01

    This paper focuses on the question how companies can build new capabilities or competencies based on discontinuous technological innovations? In particular, we analyze how corporate ventures are set up to develop and commercialize these radical innovations can play a crucial role in the process of building new competencies (not only technological capabilities). New competencies are in turn the basis to create a range of new businesses. Building and deploying competencies are intrinsically rel...

  7. International conference on innovative technologies for nuclear fuel cycles and nuclear power. Book of extended synopses

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-07-01

    A wide range of issues relevant to the innovative technologies for nuclear power cycle and nuclear power were addressed. The 7 sessions of the conference were entitled: (1) no title; (2) needs, prospects and challenges for innovation; (3) evolution of technical, social, economic and political conditions; (4) panel on challenges for the deployment of innovative technologies; (5) international programmes on innovative nuclear systems; (6) innovative nuclear systems and related R and D programmes; (7) concluding panel.

  8. Influence of Technological Assets on Organizational Performance through Absorptive Capacity, Organizational Innovation and Internal Labour Flexibility

    Directory of Open Access Journals (Sweden)

    Encarnación García-Sánchez

    2018-03-01

    Full Text Available Organizational innovation is increasingly mandatory for firms to overcome their competitors. Organizational innovation is especially relevant in today’s dynamic and turbulent environments, where other internal variables—such as technological assets, employee training, coordination of new management capabilities, and new flexible human resources and more adaptable organizational designs—must be encouraged to create value and competitive advantage. The purpose of our research is to analyse whether technological assets influence absorptive capacity (potential and realized absorptive capacity and how absorptive capacity influences internal labour flexibility, organizational innovation and performance. We achieve these goals by analysing the interrelations among internal labour flexibility, organizational innovation and performance, using the theory of resources and capabilities. A quantitative study was carried out with data gathered by personal interview using a structured questionnaire. Relationships proposed in the theoretical model were estimated through a structural equation model, using a sample of 160 European technology companies. The results show that support for technology and improvement of technological skills and technological distinctive competencies promote improvement in organizational performance through their positive influence on the processes of potential and realized absorption capacity. Potential absorptive capacity influences realized absorptive capacity, which impacts not only internal labour flexibility but also organizational innovation and organizational performance. Further, internal labour flexibility influences organizational performance through organizational innovation. This issue is of particular interest when considering the dynamic nature of turbulent technological environments in which the organization operates. Technological assets thus identify new sources of flexibility and organizational innovation based

  9. Radical and Incremental Innovation Preferences in Information Technology: An Empirical Study in an Emerging Economy

    Directory of Open Access Journals (Sweden)

    Tarun K. Sen

    2011-11-01

    Full Text Available Radical and Incremental Innovation Preferences in Information Technology: An Empirical Study in an Emerging Economy Abstract Innovation in information technology is a primary driver for growth in developed economies. Research indicates that countries go through three stages in the adoption of innovation strategies: buying innovation through global trade, incremental innovation from other countries by enhancing efficiency, and, at the most developed stage, radically innovating independently for competitive advantage. The first two stages of innovation maturity depend more on cross-border trade than the third stage. In this paper, we find that IT professionals in in an emerging economy such as India believe in radical innovation over incremental innovation (adaptation as a growth strategy, even though competitive advantage may rest in adaptation. The results of the study report the preference for innovation strategies among IT professionals in India and its implications for other rapidly growing emerging economies.

  10. Invisible Success: Problems with the Grand Technological Innovation in Higher Education

    Science.gov (United States)

    Whitworth, Andrew

    2012-01-01

    This paper investigates a "grand" educational technology innovation through theoretical lenses inspired by Cervero and Wilson's (1994, 1998) work. Through taking this approach it is possible to show how ideas about the form of the innovation and perceptions of its ultimate "success" or "failure", varied between stakeholder groups. The project was…

  11. Collaboration on technological innovation in Danish fashion chains: A network perspective

    DEFF Research Database (Denmark)

    Tambo, Torben

    2014-01-01

    and departments stores, technology and service providers, ownership structures and local level supply chain facilities. This paper analyses theoretical and empirical views of innovation in international retail networks using lead actors in the (Danish) fashion industry as a case to highlight how this industry...... in business networks. The network comprises an innovation system that focuses on organisational learning and iterative development of the intended technologies. Implications of the current study are suggestions to brand owners, network partners and retailers on how to identify, understand, support and promote......With brand owners struggling to compete with new products, physical production processes and sourcing logistics, innovation taking place in retail networks is often overlooked. Networks in retailing are comprised by the brand owner, the varieties of single- and multi-brand stores, chains...

  12. school-based data and management of technological innovations

    African Journals Online (AJOL)

    PROF EKWUEME

    innovations in public secondary schools in Cross River State. One hypothesis ... technology go hand in hand. Advances in ... Osika E. Okon, Department of Educational Administration and Planning, University of Calabar, Calabar, .... Science teachers in 50 middle schools located in five urban districts in the United States of.

  13. Science, Technology and Innovation Policy Research Organization

    International Development Research Centre (IDRC) Digital Library (Canada)

    Ce financement contribuera à renforcer le rôle de la Science, Technology and Innovation Policy Research Organization (STIPRO) en tant qu'organisme crédible de recherche sur les politiques publiques en Tanzanie, en améliorant sa capacité à fournir des recherches de qualité supérieure, influentes et utiles en matière de ...

  14. Developing technology intelligence strategy to access knowledge of innovation clusters. : The case of KODAK in Cambridge

    OpenAIRE

    Dang , Rani Jeanne; Mortara , Letizia; Thomson , Ruth; Minshall , Tim

    2010-01-01

    International audience; Current times are characterised by a knowledge-based economy and fast technological change. In this difficult environment, companies compete to maintain a relevant position through innovation. In response to these challenges, many companies are currently adopting an open approach to innovation, pursuing innovation by combining internal and external resources. Technology intelligence (TI) activities support the implementation of open innovation with the systematic captu...

  15. The Roles of Research Universities in Indigenous National Technological Innovation

    Science.gov (United States)

    Feng, Zhuolin; Zhao, Wenhua

    2008-01-01

    The world is increasingly merged into a global market economy, and the government's intervention power in economy has rapidly given way to that of science and technology. For the world's major economic powers, indigenous technological innovation has become a national strategy for enhancing competitiveness. Investment in scientific and…

  16. Meeting the nation's environmental restoration and waste management challenges through the accelerated development of innovative technologies: A report on the DOIT initiative

    International Nuclear Information System (INIS)

    Prestwich, S.; Chee, T.

    1994-01-01

    New environmental technologies are needed to meet the Nation's environmental restoration and waste management challenges. However, in the past environmental technology development and commercialization process has been hampered by the absence of critical intergovernmental linkages and broad public acceptability. If the Nation can create cooperative linkages among levels of government and stakeholders, there is a tremendous opportunity not only to accelerate the pace of site cleanups but also to capture a larger share of the growing international market for remediation and waste management technologies. Recognizing this opportunity not only to accelerate the pace of site cleanups but also to capture a larger share of the growing international market for remediation and waste management technologies. Recognizing this opportunity, western governors and the U.S. Departments of Defense, Interior, Energy, and U.S. Environmental Protection Agency have established a partnership to test ways to expedite the deployment and testing of innovative cleanup technologies. This partnership, which was formalized through the creation of the Federal Advisory Committee to Develop On-Site Innovative Technologies (the DOIT initiative), will soon test models for speeding up the deployment, testing, evaluation, and commercialization of environmental technologies at selected demonstration sites primarily in the western United States. This evaluation process will be pursued in a manner that poses no additional risks to the environment, encourages innovative public participation, and helps ensure financial feasibility, insurability, and eventual commercialization of new technologies

  17. Symposium | Science, technology, innovation & social responsibility | 11 November

    CERN Multimedia

    2015-01-01

    It is widely recognised that science, technology and innovation are among the most powerful forces driving social change and development today. Their impact on the progress of humanity will be discussed at this symposium.   Wednesday, 11 November, 3 p.m. to 6 p.m. Council Chamber This symposium, organised by CERN and the World Academy of Art & Science (WAAS) under the auspices of United Nations Office at Geneva, will survey the potential impact of scientific and technological innovation in different fields on the progress of humanity in the 21st century and the alternative mechanisms available to ensure socially responsible management of these activities by the research community, business and governments. The introduction will be given by Rolf Heuer, CERN Director-General, Michael Møller, UNOG Director-General, and Heitor Gurgulino de Souza, WAAS President. Registration is mandatory for people who do not hold a CERN access card. The talks will be i...

  18. Innovation, productivity, and pricing: Capturing value from precision medicine technology in Canada.

    Science.gov (United States)

    Emery, J C Herbert; Zwicker, Jennifer D

    2017-07-01

    For new technology and innovation such as precision medicine to become part of the solution for the fiscal sustainability of Canadian Medicare, decision-makers need to change how services are priced rather than trying to restrain emerging technologies like precision medicine for short-term cost savings. If provincial public payers shift their thinking to be public purchasers, value considerations would direct reform of the reimbursement system to have prices that adjust with technologically driven productivity gains. This strategic shift in thinking is necessary if Canadians are to benefit from the promised benefits of innovations like precision medicine.

  19. Research on Technology Innovation of China's NEV Industry Based on Patent Analysis

    DEFF Research Database (Denmark)

    Wang, Jingyu; Liu, Yingqi; Kokko, Ari

    2016-01-01

    Purpose/Significance: The development of Chinas new energy vehicle(NEV) industry is concerned by both the government and enterprises. Method/Process: Based on the patent data, this paper conducts a deep analysis on the technology innovation of Chinas NEV industry from three perspectives- the year...... distribution of the patent, the distribution of the patent applicants and the distribution of patent technology area. Then, the paper makes further correlation analysis on the NEV industry chain and the patent data. Result/Conclusion: In general,the paper comprehensively reflects the whole picture of Chinas...... NEV industry technology innovation and gives some ideas for its further development....

  20. Innovation in nuclear technology

    International Nuclear Information System (INIS)

    Bertel, E.

    2007-01-01

    Innovation has been a driving force for the success of nuclear energy and remains essential for its future. For the continued safe and economically effective operation and maintenance of existing nuclear systems, and to meet the goals set out by projects aiming at designing and implementing advanced systems for the future, efficient innovation systems are needed. Consequently, analysing innovation systems is essential to understand their characteristics and enhance their performance in the nuclear sector. Lessons learnt from innovation programmes that have already been completed can help enhance the effectiveness of future programmes. The analysis of past experience provides a means for identifying causes of failure as well as best practices. Although national and local conditions are important factors, the main drivers for the success of innovative endeavors are common to all countries. Cooperation and coordination among the various actors are major elements promoting success. All interested stakeholders, including research organisations, industrial actors, regulators and civil society, have a role to play in supporting the success of innovation, but governments are an essential trigger, especially for projects with long durations and very ambitious objectives. Governments have a major role to play in promoting innovation because they are responsible for the overall national energy policy which sets the stage for the eventual deployment of innovative products and processes. Moreover, only governments can create the stable legal and regulatory framework favourable to the undertaking and successful completion of innovation programmes. International organisations such as the NEA may help enhance the effectiveness of national policies and innovation programmes by providing a forum for exchanging information, facilitating multilateral collaboration and joint endeavors, and offering technical support for the management of innovative programmes

  1. Technology innovation for infectious diseases in the developing world.

    Science.gov (United States)

    So, Anthony D; Ruiz-Esparza, Quentin

    2012-10-25

    Enabling innovation and access to health technologies remains a key strategy in combating infectious diseases in low- and middle-income countries (LMICs). However, a gulf between paying markets and the endemicity of such diseases has contributed to the dearth of R&D in meeting these public health needs. While the pharmaceutical industry views emerging economies as potential new markets, most of the world's poorest bottom billion now reside in middle-income countries--a fact that has complicated tiered access arrangements. However, product development partnerships--particularly those involving academic institutions and small firms--find commercial opportunities in pursuing even neglected diseases; and a growing pharmaceutical sector in BRICS countries offers hope for an indigenous base of innovation. Such innovation will be shaped by 1) access to building blocks of knowledge; 2) strategic use of intellectual property and innovative financing to meet public health goals; 3) collaborative norms of open innovation; and 4) alternative business models, some with a double bottom line. Facing such resource constraints, LMICs are poised to develop a new, more resource-effective model of innovation that holds exciting promise in meeting the needs of global health.

  2. Older adults' motivated choice for technological innovation: evidence for benefit-driven selectivity.

    Science.gov (United States)

    Melenhorst, Anne-Sophie; Rogers, Wendy A; Bouwhuis, Don G

    2006-03-01

    This study examined older adults' motivation to adopt technological innovation. Sixty-eight older e-mail users and nonusers discussed the use of e-mail and of traditional communication methods in 18 focus groups. The results show older adults' benefit-driven approach to new communication technology. Regardless of whether their decision about the new technology was positive or negative and irrespective of their e-mail experience, participants focused on benefits rather than costs. For traditional media, both costs and benefits were important. Results contradict the common belief that barriers such as usability problems determine whether older people use new technology and indicate the decisive role of perceived benefits for successful innovation. ((c) 2006 APA, all rights reserved).

  3. An international partnership approach to clean energy technology innovation: Carbon capture and storage

    Science.gov (United States)

    Yang, Xiaoliang

    Is a global research partnership effective in developing, deploying, and diffusing clean energy technologies? Drawing on and extending innovation system studies, this doctoral dissertation elaborates an analytical model for a global technology learning system; examines the rationales, mechanisms, and effectiveness of the United States-- China Clean Energy Research Center Advanced Coal Technology Consortium (CERC-ACTC); and analyzes government's role in developing and implementing carbon capture and storage technologies in the United States (U.S.) and China. Studies have shown that successful technology innovation leads to economic prosperity and national competence, and prove that technology innovation does not happen in isolation but rather within interactive systems among stakeholders. However, the innovation process itself remains unclear, particularly with regard to interactive learning among and between major institutional actors, including technology developers, regulators, and financial organizations. This study seeks to advance scholarship on the interactive learning from the angle of global interactive learning. This dissertation research project seeks, as well, to inform policy-makers of how to strengthen international collaboration in clean energy technology development. The U.S.--China CERC-ACTC announced by Presidents Obama and Hu in 2009, provided a unique opportunity to close this scholarly gap. ACTC aimed to "advance the coal technology needed to safely, effectively, and efficiently utilize coal resources including the ability to capture, store, and utilize the emissions from coal use in both nations " through the joint research and development by U.S. and Chinese scientists and engineers. This dissertation project included one-year field research in the two countries, with in-depth interviews of key stakeholders, a survey of Consortium participants, analysis of available data, and site visits to collaborative research projects from 2013-2014. This

  4. Economics of technological change and the natural environment: How effective are innovations as a remedy for resource scarcity?

    International Nuclear Information System (INIS)

    Bretschger, Lucas

    2005-01-01

    The paper aims to substantiate the importance of endogenous innovations when evaluating the compatibility of natural resource use and economic development. It explains that technological change has the potential to compensate for natural resource scarcity, diminishing returns to capital, poor input substitution, and material balance restrictions, but is limited by various restrictions like fading returns to innovative investments and rising research costs. It also shows how innovative activities are fostered by accurate price signals and research-favouring sectoral change. The simultaneous effects of increasing technical knowledge, decreasing resource inputs, and increasing world population largely determine the chances of long-run sustainable development. Consequently, future research has to be directed at a more thorough understanding of the mechanisms driving innovations in the presence of natural resource scarcity

  5. Research on the Scientific and Technological Innovation of Research University and Its Strategic Measures

    Science.gov (United States)

    Cheng, Yongbo; Ge, Shaowei

    2005-01-01

    This paper illustrates the important role that the scientific and technological innovation plays in the research university. Technological innovation is one of the main functions that the research university serves and contributes for the development of economy and society, which is the essential measure for Research University to promote…

  6. Involving stakeholders in evaluating environmental restoration technologies

    International Nuclear Information System (INIS)

    McCabe, G.H.; Serie, P.J.

    1993-02-01

    Involving citizens, interest groups, and regulators in environmental restoration and waste management programs is a challenge for government agencies and the organizations that support them. To be effective, such involvement activities must identify all individuals and groups who have a stake in the cleanup. Their participation must be early, substantive, and meaningful. Stockholders must be able to see how their input was considered and used, and feel that a good- faith effort was made to reconcile conflicting objectives. The Integrated Demonstration for Cleanup of Volatile Organic Compounds at Arid Sites (VOC-Arid ID) is a Department of Energy Office of Technology Development project located at Hanford. Along with technical evaluation of innovative cleanup technologies, the program is conducting an institutional assessment of regulatory and public acceptance of new technologies. Through a series of interviews and workshops, and use of a computerized information management tool, stakeholders are having a voice in the evaluation. Public and regulatory reaction has been positive

  7. NOVELTIES AND INNOVATIONS IN THE FAMILY FARM: DEBATES AND DISCUSSIONS ON THE PRODUCTION OF TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    Alessandra Troian

    2011-07-01

    Full Text Available The subjects of news production and technological innovation in agriculture is relatively new in academic debate, however, several studies have approached this issue, because, above all, their relevance in the current situation. Thus, in order to contribute to the discussion, this article, through the logic of multilevel perspective (PMN, aims to differentiate new innovations in order to identify where they emerge and what distinguishes them, as well as discuss the importance of thinking a new technological model for the family farm. Methodologically, we used the literature review, through research papers and articles on the topic of family agriculture, innovation and technical progress. Through analysis and discussions, we can demonstrate the importance of recognizing the complexity and heterogeneity of family farming, as well as the capacity that it has to generate and adapt new technologies. It is evident, yet the need for research and knowledge production aimed at meeting the needs of these. Finally, it is the bodies of research and technological development in Brazil handicapped when it comes to production technologies and innovations aimed at family farms, supporting the need for investments in new innovations and specific.

  8. Determining the directions of increasing the innovative potential of the region by developing innovative technologies and competences when preparing and implementing large investment projects

    Directory of Open Access Journals (Sweden)

    Timur V. Kramin

    2015-12-01

    Full Text Available Objective to determine the directions of increasing the innovative potential of a region through the development of innovative technologies and competences in the process of preparation and implementation of large investment projects in the Republic of Tatarstan. Methods methodology of project management institutional approach. Results it is proved that the main largescale directions of innovative potential development in the Republic of Tatarstan as a result of preparation and implementing of Universiade 2013 in Kazan are knowledge management information technologies risk management. It is shown that in the framework of the considered innovative areas a complete system was formed of competences of employees and managers in the fields of education trade hospitality and service. Scientific novelty the key directions were defined of increasing the innovative potential of a region through the development of innovative technologies and competences in the process of preparation and implementation of large investment projects by the example of the World Summer Student Games in Kazan in 2013. Practical significance on the basis of specific examples the authors illustrate the practiceoriented mechanism of innovative potential development of a region as a result of implementation of large investment projects. nbsp

  9. Technology transfer from biomedical research to clinical practice: measuring innovation performance.

    Science.gov (United States)

    Balas, E Andrew; Elkin, Peter L

    2013-12-01

    Studies documented 17 years of transfer time from clinical trials to practice of care. Launched in 2002, the National Institutes of Health (NIH) translational research initiative needs to develop metrics for impact assessment. A recent White House report highlighted that research and development productivity is declining as a result of increased research spending while the new drugs output is flat. The goal of this study was to develop an expanded model of research-based innovation and performance thresholds of transfer from research to practice. Models for transfer of research to practice have been collected and reviewed. Subsequently, innovation pathways have been specified based on common characteristics. An integrated, intellectual property transfer model is described. The central but often disregarded role of research innovation disclosure is highlighted. Measures of research transfer and milestones of progress have been identified based on the Association of University Technology Managers 2012 performance reports. Numeric milestones of technology transfer are recommended at threshold (top 50%), target (top 25%), and stretch goal (top 10%) performance levels. Transfer measures and corresponding target levels include research spending to disclosure (0.81), patents to start-up (>0.1), patents to licenses (>2.25), and average per license income (>$48,000). Several limitations of measurement are described. Academic institutions should take strategic steps to bring innovation to the center of scholarly discussions. Research on research, particularly on pathways to disclosures, is needed to improve R&D productivity. Researchers should be informed about the technology transfer performance of their institution and regulations should better support innovators.

  10. Between tradition and technological innovation: challenges to lime Heritage conservation

    Directory of Open Access Journals (Sweden)

    Marluci Menezes

    2016-01-01

    Full Text Available The aim is to discuss the relationship between traditional and scientific technological knowledge as innovative and fundamental to heritage conservation. It is argued that this innovation does not necessarily come from scientific knowledge, but potentially from a wise articulation between these two types of knowledge. This discussion starts from an already long process of reflection on lime heritage conservation, as developed in LNEC from research projects.

  11. Managing interactions between technological and stylistic innovation in the media industries, insights from the introduction of ebook technology in the publishing industry

    NARCIS (Netherlands)

    T.S. Schweizer (Sophie)

    2002-01-01

    textabstractThe mainstream of innovation research pays a lot of attention to technological innovation, but has neglected its interaction with another type of innovation, which is particularly important in sectors like the furniture, fashion and the media content industries: stylistic innovation.

  12. Innovative use of the integrative review to evaluate evidence of technology transformation in healthcare.

    Science.gov (United States)

    Phillips, Andrew B; Merrill, Jacqueline A

    2015-12-01

    Healthcare is in a period significant transformational activity through the accelerated adoption of healthcare technologies, new reimbursement systems that emphasize shared savings and care coordination, and the common place use of mobile technologies by patients, providers, and others. The complexity of healthcare creates barriers to transformational activity and has the potential to inhibit the desired paths toward change envisioned by policymakers. Methods for understanding how change is occurring within this complex environment are important to the evaluation of delivery system reform and the role of technology in healthcare transformation. This study examines the use on an integrative review methodology to evaluate the healthcare literature for evidence of technology transformation in healthcare. The methodology integrates the evaluation of a broad set of literature with an established evaluative framework to develop a more complete understanding of a particular topic. We applied this methodology and the framework of punctuated equilibrium (PEq) to the analysis of the healthcare literature from 2004 to 2012 for evidence of technology transformation, a time during which technology was at the forefront of healthcare policy. The analysis demonstrated that the established PEq framework applied to the literature showed considerable potential for evaluating the progress of policies that encourage healthcare transformation. Significant inhibitors to change were identified through the integrative review and categorized into ten themes that describe the resistant structure of healthcare delivery: variations in the environment; market complexity; regulations; flawed risks and rewards; change theories; barriers; ethical considerations; competition and sustainability; environmental elements, and internal elements. We hypothesize that the resistant nature of the healthcare system described by this study creates barriers to the direct consumer involvement and engagement

  13. Potential for Integrating Diffusion of Innovation Principles into Life Cycle Assessment of Emerging Technologies.

    Science.gov (United States)

    Sharp, Benjamin E; Miller, Shelie A

    2016-03-15

    Life cycle assessment (LCA) measures cradle-to-grave environmental impacts of a product. To assess impacts of an emerging technology, LCA should be coupled with additional methods that estimate how that technology might be deployed. The extent and manner that an emerging technology diffuses throughout a region shapes the magnitude and type of environmental impacts. Diffusion of innovation is an established field of research that analyzes the adoption of new innovations, and its principles can be used to construct scenario models that enhance LCA of emerging technologies. Integrating diffusion modeling techniques with an LCA of emerging technology can provide estimates for the extent of market penetration, the displacement of existing systems, and the rate of adoption. Two general perspectives of application are macro-level diffusion models that use a function of time to represent adoption, and microlevel diffusion models that simulate adoption through interactions of individuals. Incorporating diffusion of innovation concepts complement existing methods within LCA to inform proactive environmental management of emerging technologies.

  14. Knowledge sharing and innovation in relationships interorganizational type of information technology outsourcing

    Directory of Open Access Journals (Sweden)

    Roberta Rodrigues Faoro

    2017-04-01

    Full Text Available Introduction: this paper presents an analysis of the sharing of knowledge and innovation in the inter-relationships of the type outsourcing of Information Technology. Objective: analyze the existence of relationship between knowledge sharing and innovation in the inter-relationships of the type of outsourcing information technology (IT. Methodology: research is exploratory, qualitative and using as a strategy the multiple case study, which analyzed 12 companies in IT outsourcing environments, 4 suppliers of IT and IT 8 client companies. Data were collected through semi structured interviews, documentary and direct observation. Results: it can be noted that the sharing of knowledge showed contribute to the existence of innovation in IT outsourcing environment. The suppliers prioritize the codification of shared knowledge, while customers prefer the sharing of knowledge through informal conversations. It was identified that the motives for outsourcing IT may be related to the sharing of knowledge and innovation. Conclusions: this research contributes to the advancement of knowledge about the knowledge and innovation sharing phenomena in outsourcing of IT environments.

  15. The female innovation-generation consumer's evaluation

    African Journals Online (AJOL)

    user

    to date is the millennial consumer segment ... consumers (Eastman et al, 2014; Pérez-Luño et al, 2011), due to their love of technology and the virtual world. Consumers of the innovation- generation were born between 1980 and 2000 and currently fall in the age ... The constantly changing media habits of consumers ...

  16. A Planning Framework for the Deployment of Innovative Information and Communication Technologies in Procurement

    Science.gov (United States)

    Alard, Robert; Gustafsson, Martin; Nienhaus, Jörg

    The management of buyer-supplier relations is a major topic for many enterprises today. Modern Information and Communication Technologies (ICT) offer interesting perspectives on opportunities and implementation approaches. Today, logistics and procurement departments of numerous enterprises are evaluating the possibilities and opportunities of new ICT solutions and especially of internet-based electronic procurement solutions for the optimisation and re-engineering of their buyer-supplier relationships. Due to the highly innovative character of the new ICT solutions and the scarcely available operational examples in the industry, only little guidance exists to support responsible managers during the evaluation, planning and designing of internet-based electronic procurement solutions. This paper describes a framework for the strategic evaluation and planning of the deployment of internet-based procurement solutions for direct materials. The presented approach supports enterprises in the analysis of procurement objects and procurement structuring, in the definition and management of buyer-supplier-relationships, in the requirements analysis of ICT solutions as well as the assessment of the potential to support procurement with innovative ICT and internet-based electronic procurement solutions.

  17. Science and Technology Innovation for the Base of the Pyramid ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Indeed, some technological advances appear to have exacerbated the gap between them. The question is, how can science and technology (S&T) innovation be brought to bear on the needs of the poor? This project will endeavor to address the development needs of the poor and excluded in six Southeast Asian countries ...

  18. Support for the Development of Technological Innovations: Promoting Responsible Social Uses.

    Science.gov (United States)

    Legault, Georges A; Verchère, Céline; Patenaude, Johane

    2018-04-01

    How can technological development, economic development, and the claims from society be reconciled? How should responsible innovation be promoted? The "responsible social uses" approach proposed here was devised with these considerations in view. In this article, a support procedure for promoting responsible social uses (RSU) is set out and presented. First, the context in which this procedure emerged, which incorporates features of both the user-experience approach and that of ethical acceptability in technological development, is specified. Next, the characteristic features of the procedure are presented, that is, its purpose, fundamental orientation, and component parts as experimented by partners. Third, the RSU approach is compared with other support approaches and considered in term of how each approach assumes responsible innovation. Briefly, the RSU procedure is a way of addressing the issue of responsible innovation through an effective integration of social concerns.

  19. Spaces of the possible: universal Darwinism and the wall between technological and biological innovation.

    Science.gov (United States)

    Wagner, Andreas; Rosen, William

    2014-08-06

    Innovations in biological evolution and in technology have many common features. Some of them involve similar processes, such as trial and error and horizontal information transfer. Others describe analogous outcomes such as multiple independent origins of similar innovations. Yet others display similar temporal patterns such as episodic bursts of change separated by periods of stasis. We review nine such commonalities, and propose that the mathematical concept of a space of innovations, discoveries or designs can help explain them. This concept can also help demolish a persistent conceptual wall between technological and biological innovation. © 2014 The Author(s) Published by the Royal Society. All rights reserved.

  20. Product and technology innovation: what can biomimicry inspire?

    Science.gov (United States)

    Lurie-Luke, Elena

    2014-12-01

    Biomimicry (bio- meaning life in Greek, and -mimesis, meaning to copy) is a growing field that seeks to interpolate natural biological mechanisms and structures into a wide range of applications. The rise of interest in biomimicry in recent years has provided a fertile ground for innovation. This review provides an eco-system based analysis of biomimicry inspired technology and product innovation. A multi-disciplinary framework has been developed to accomplish this analysis and the findings focus on the areas that have been most strikingly affected by the application of biomimicry and also highlight the emerging trends and opportunity areas. Copyright © 2014 Elsevier Inc. All rights reserved.