Enacting Risk in Independent Technological Innovation

DEFF Research Database (Denmark)

Berglund, Henrik; Hellström, Tomas

2002-01-01

The present study aims at investigating the role of risk in the activity of independent technological venturing. Altogether, 12 deep-interviews were conducted with technological entrepreneurs, who had taken part in the inventive, developmental and the commercialisation phases of a technology......-based innovation process. The interviews revealed a number of enactment approaches through which these innovators encountered and affected (dealt with or transformed) risk within the innovation process. Factors thus developed from the empirical material included human capital, pace and priority, the world moves...... for the benefit of innovation management....

Building new competencies for new business creation based on breakthrough technological innovations

NARCIS (Netherlands)

Vanhaverbeke, W.P.M.; Kirschbaum, R.

2003-01-01

This paper focuses on the question how companies can build new capabilities or competencies based on discontinuous technological innovations? In particular, we analyze how corporate ventures are set up to develop and commercialize these radical innovations can play a crucial role in the process of

Technology Matters - When new technology reshape innovation

DEFF Research Database (Denmark)

Edwards, Kasper; Pedersen, Jørgen Lindgaard

2004-01-01

Management of innovation is an important issue for firms and being good at this may be the deciding difference between death and survival. This paper ar-gues, based on 12 case studies, that new technology influence the innovative ca-pability of firms and disturbingly the process appears...... not to be managed in the sense that aims, instruments and resources are unclear. It is observed that new technology is adopted with a limited scope and fo-cus – often to solve a particular technical problem e.g. the quality of specifica-tion are too low. For a single reason a new technology is introduced within...... the firm, which over time becomes a source of innovation. However, through adoption of this new technology firms engage in a mu-tual learning and forming process where the firm learn by using the new technol-ogy. When learning, the firm and the new technology is mutually formed as the firm tries to adopt...

Building new competencies for new business creation based on breakthrough technological innovations

OpenAIRE

Vanhaverbeke, W.P.M.; Kirschbaum, R.

2003-01-01

This paper focuses on the question how companies can build new capabilities or competencies based on discontinuous technological innovations? In particular, we analyze how corporate ventures are set up to develop and commercialize these radical innovations can play a crucial role in the process of building new competencies (not only technological capabilities). New competencies are in turn the basis to create a range of new businesses. Building and deploying competencies are intrinsically rel...

Industrialized Innovation: The Connection of Science & Technology Innovation with Industrial Innovation

Institute of Scientific and Technical Information of China (English)

Yinxing Hong; Yao Lu; Jianghuai Zheng

2017-01-01

In light of the relationship and the current disconnection between science & technology (S&T) innovation and industrial innovation in China,it is necessary to put forward and emphasize the concept of industrialized innovation.Industrialized innovation is the bridge and intermediation between S&T innovation and industrial innovation,which is not only a concept,but also a mechanism and combination force.There are two ways to achieve industrialized innovation:through industry-university-research coordination and through technology entrepreneurship.The meaning of industry-university-research coordination is not about coordination among industry,university and research sectors in an institutional sense;rather it is about the coordination of the functions of cultivation and development in new industries,new technologies,and new talents of industrialized innovation.The incentive mechanism for industrialized innovation should motivate not only innovation but also coordination.Technology entrepreneurship is the industrialization of new technology through business start-ups,which occurs beyond the stage of incubation and development of new technology.The capital of technology entrepreneurship is the set consisting of knowledge capital manifested through technological innovation,human capital manifested through entrepreneurs,and physical capital in the form of venture capital.While physical capital is indispensable,knowledge capital and human capital play the decisive role in technology entrepreneurship.The industrialization of technological innovation involves two requirements:one is to enable the new technology industry to achieve a large scale rapidly,and the other is to fully realize the potential value of the new technology.Both requirements are reliant on effective innovation in business models.

Reputation for technological innovation: Does it actually cohere with innovative activity?

Directory of Open Access Journals (Sweden)

Patrick J. Höflinger

2018-01-01

Full Text Available Firms strategically promote, foster and pursue a reputation for technological innovation. Yet, present research did not examine whether such perception actually coheres with innovative activity itself. Previous studies in this field often relied solely on tangible products/product introductions, hence we apply multiple proxies based on a firm's intangible innovative performance to examine the influences on reputation for technological innovation. Using patent, financial and consumer data our Poisson regression analyzes 65 international firms which have been nominated by 231 consumers. We apply time-series and likewise cross-sectional data for our interdisciplinary analysis. Our findings demonstrate that innovative performance (citation intensity is linked to reputation for technological innovation. Counter-intuitively, our results provide evidence that marketing intensity negatively influences a reputation for technological innovation. From the results, we conclude that innovative performance may be associated with a reputation for technological innovation. Actual technological advancement attracts attention from consumers that cannot be purchased with greater marketing investments. This implies that consumers appreciate the costly and uncertain R&D efforts and value those firms that constantly offer innovation. As a theoretical implication, the consideration of intangible inputs for reputation research is an important contribution for a holistic understanding. The results represent essential strategic information for innovation and marketing functions, where both divisions need to align their activities and investments.

The Impact of Technological and Non-Technological Innovations on Firm Growth

OpenAIRE

Ali-Yrkkö, Jyrki; Martikainen, Olli

2008-01-01

This study investigates the relationship between innovations and firm growth, based on the data of Finnish firms operating in the software industry. We find that in terms of turnover and employment, firms with only technological innovations do not grow more rapidly than other firms. However, firm growth is positively associated with the combination of technological and non-technological innovations.

Innovative Technology-Based Interventions for Autism Spectrum Disorders: A Meta-Analysis

Science.gov (United States)

Grynszpan, Ouriel; Weiss, Patrice L.; Perez-Diaz, Fernando; Gal, Eynat

2014-01-01

This article reports the results of a meta-analysis of technology-based intervention studies for children with autism spectrum disorders. We conducted a systematic review of research that used a pre-post design to assess innovative technology interventions, including computer programs, virtual reality, and robotics. The selected studies provided…

Technology Audit: Assessment of Innovative Portfolio

Directory of Open Access Journals (Sweden)

Kurushina Viktoria

2016-01-01

Full Text Available The article discusses the features of the technological audit performing in the companies of oil and gas sector of Russian economy. To measure the innovations quality level the scale was developed based on the Theory of Inventive Problem Solving and the theory of technological structures. Figures of the innovations quantity by levels, volume and quality of the innovative portfolio are offered for assessment the innovative portfolio quality. The method was tested on an example of oil and gas transporting enterprises. The results of the comparative analysis of innovative portfolio are shown.

Regulatory barriers to hazardous waste technology innovation

International Nuclear Information System (INIS)

Kuusinen, T.L.; Siegel, M.R.

1991-02-01

The primary federal regulatory programs that influence the development of new technology for hazardous waste are the Resource Conservation and Recovery Act (RCRA) and the Comprehensive Environmental Response, Compensation and Liability Act (CERCLA, also commonly known as Superfund). Two important aspects of RCRA that can create barriers to hazardous waste technology innovation are technology-based waste pre-treatment standards and a cumbersome permitting program. By choosing a technology-based approach to the RCRA land disposal restrictions program, the US Environmental Protection Agency (EPA) has simultaneously created tremendous demand for the technologies specified in its regulations, while at the same time significantly reduced incentives for technology innovation that might have otherwise existed. Also, the RCRA hazardous waste permitting process can take years and cost hundreds of thousands of dollars. The natural tendency of permit writers to be cautious of unproven (i.e., innovative) technology also can create a barrier to deployment of new technologies. EPA has created several permitting innovations, however, to attempt to mitigate this latter barrier. Understanding the constraints of these permitting innovations can be important to the success of hazardous waste technology development programs. 3 refs

Research on Technology Innovation of China's NEV Industry Based on Patent Analysis

DEFF Research Database (Denmark)

Wang, Jingyu; Liu, Yingqi; Kokko, Ari

2016-01-01

Purpose/Significance: The development of Chinas new energy vehicle(NEV) industry is concerned by both the government and enterprises. Method/Process: Based on the patent data, this paper conducts a deep analysis on the technology innovation of Chinas NEV industry from three perspectives- the year...... distribution of the patent, the distribution of the patent applicants and the distribution of patent technology area. Then, the paper makes further correlation analysis on the NEV industry chain and the patent data. Result/Conclusion: In general,the paper comprehensively reflects the whole picture of Chinas...... NEV industry technology innovation and gives some ideas for its further development....

National Innovation System and Disruptive Innovations in Synthetic Rubber and Tire Technology

Directory of Open Access Journals (Sweden)

Ray R. Gehani

2008-01-01

Full Text Available The current models of National Innovation Systems (NIS are based on interactions and learning across three institutions: government, university and industry. This empirical study of the evolution of innovations in rubber and tire technologies such as the collaborative innovative suppliers (of raw materials and human capital and disruptive rival innovators to the traditional tri-helical model of National Innovation System. This was empirically examined for the evolution of rubber and tire technology and the rise and decline of its innovative region: the Rubber Capital of the World in Akron, Ohio.

Launching technological innovations

DEFF Research Database (Denmark)

Talke, Katrin; Salomo, Søren

2009-01-01

have received less attention. This study considers the interdependencies between strategic, internally and externally, directed tactical launch activities and investigates both direct and indirect performance effects. The analysis is based upon data from 113 technological innovations launched...

Digital Technologies as Education Innovation at Universities

Science.gov (United States)

Kryukov, Vladimir; Gorin, Alexey

2017-01-01

This paper analyses the use of digital technology-based education innovations in higher education. It demonstrated that extensive implementation of digital technologies in universities is the main factor conditioning the acceleration of innovative changes in educational processes, while digital technologies themselves become one of the key…

A New Direction for Technology-Based Economic Development: The Role of Innovation Intermediaries

Science.gov (United States)

Bendis, Richard A.; Seline, Richard S.; Byler, Ethan J.

2008-01-01

Accelerating innovation to drive economic growth is the foremost goal for technology-based economic development organizations today. Realizing this goal through programmes is challenged by limited and outdated operating models. The authors outline their 21st Century Innovation Intermediary model, which pairs commercialization with regional…

Competitive intelligence information management and innovation in small technology-based companies

Science.gov (United States)

Tanev, Stoyan

2007-05-01

In this article we examine how (i) company type and (ii) the competitive intelligence information used by small technology-based companies affect their innovation performance. The focus is on the specific information types used and not on the information sources. Information topics are classified in four groups - customers (10), company (9), competitor (11) and industry (12). The sample consists of 45 small new technology-based companies, specialized suppliers, and service companies from a variety of sectors - software, photonics, telecommunications, biomedical engineering and biotech, traditional manufacturing etc. The results suggest that the total number of intelligence information topics companies use to make decisions about innovation is not associated with the number of their new products, processes, services and patents. Therefore the companies in our sample do not seem to have the resources, processes or value systems required to use different competitive intelligence information when making decisions on innovation or may rely more on their own internal logic than on external information. Companies are classified using a Pavitt-like taxonomy. Service companies are considered as a separate company type. This allows for explicitly studying both, the innovative role of new services in product driven companies, and the role of new product development in service companies.

Research on process management of nuclear power technological innovation

International Nuclear Information System (INIS)

Yang Hua; Zhou Yu

2005-01-01

Different from the other technological innovation processes, the technological innovation process of nuclear power engineering project is influenced deeply by the extensive environmental factors, the technological innovation of nuclear power engineering project needs to make an effort to reduce environmental uncertainty. This paper had described the mechanism of connection technological innovation process of nuclear power engineering project with environmental factors, and issued a feasible method based on model of bargaining to incorporate technological innovation process management of nuclear power engineering project with environmental factors. This method has realistic meanings to guide the technological innovation of nuclear power engineering project. (authors)

From translational research to open technology innovation systems.

Science.gov (United States)

Savory, Clive; Fortune, Joyce

2015-01-01

The purpose of this paper is to question whether the emphasis placed within translational research on a linear model of innovation provides the most effective model for managing health technology innovation. Several alternative perspectives are presented that have potential to enhance the existing model of translational research. A case study is presented of innovation of a clinical decision support system. The paper concludes from the case study that an extending the triple helix model of technology transfer, to one based on a quadruple helix, present a basis for improving the performance translational research. A case study approach is used to help understand development of an innovative technology within a teaching hospital. The case is then used to develop and refine a model of the health technology innovation system. The paper concludes from the case study that existing models of translational research could be refined further through the development of a quadruple helix model of heath technology innovation that encompasses greater emphasis on user-led and open innovation perspectives. The paper presents several implications for future research based on the need to enhance the model of health technology innovation used to guide policy and practice. The quadruple helix model of innovation that is proposed can potentially guide alterations to the existing model of translational research in the healthcare sector. Several suggestions are made for how innovation activity can be better supported at both a policy and operational level. This paper presents a synthesis of the innovation literature applied to a theoretically important case of open innovation in the UK National Health Service. It draws in perspectives from other industrial sectors and applies them specifically to the management and organisation of innovation activities around health technology and the services in which they are embedded.

Technology Innovation

Science.gov (United States)

EPA produces innovative technologies and facilitates their creation in line with the Agency mission to create products such as the stormwater calculator, remote sensing, innovation clusters, and low-cost air sensors.

Game-Like Technology Innovation Education

Science.gov (United States)

Magnussen, Rikke

2011-01-01

This paper examines the methodological challenges and perspectives of designing game-like scenarios for the implementation of innovation processes in school science education. This paper presents a design-based research study of a game-like innovation scenario designed for technology education for Danish public school students aged 13-15. Students…

Health technology assessment, value-based decision making, and innovation.

Science.gov (United States)

Henshall, Chris; Schuller, Tara

2013-10-01

Identifying treatments that offer value and value for money is becoming increasingly important, with interest in how health technology assessment (HTA) and decision makers can take appropriate account of what is of value to patients and to society, and in the relationship between innovation and assessments of value. This study summarizes points from an Health Technology Assessment International (HTAi) Policy Forum discussion, drawing on presentations, discussions among attendees, and background papers. Various perspectives on value were considered; most place patient health at the core of value. Wider elements of value comprise other benefits for: patients; caregivers; the health and social care systems; and society. Most decision-making systems seek to take account of similar elements of value, although they are assessed and combined in different ways. Judgment in decisions remains important and cannot be replaced by mathematical approaches. There was discussion of the value of innovation and of the effects of value assessments on innovation. Discussion also included moving toward "progressive health system decision making," an ongoing process whereby evidence-based decisions on use would be made at various stages in the technology lifecycle. Five actions are identified: (i) development of a general framework for the definition and assessment of value; development by HTA/coverage bodies and regulators of (ii) disease-specific guidance and (iii) further joint scientific advice for industry on demonstrating value; (iv) development of a framework for progressive licensing, usage, and reimbursement; and (v) promoting work to better adapt HTA, coverage, and procurement approaches to medical devices.

Technological Innovation in Primary Education

Directory of Open Access Journals (Sweden)

Luisana Sleny López Alvarado

2018-05-01

Full Text Available The purpose of this essay is to reflect on technological innovation in Primary Education. In this idea, information processing was used to support the analysis of the theoretical approaches related to the relevance of education that is based on a significant pedagogical practice capable of developing the capacities and interests, so that they can appropriate the global and local content in the vision of access to information, considering social opportunities. The restructuring to which education has been subjected has been influenced by advances in science, technology and the demands of a complex, dynamic and uncertain society in the processes of educational innovation, which involves the introduction of something new in education. the educational system, modifying its teaching-learning structures through the incorporation of Information and Communication Technologies (ICT in the curricular design of primary education in its intention to train for incursion into science and technology from use of a wide range of didactic resources that lead to pedagogical innovation. It was concluded that technological innovation in the educational praxis of primary education, requires in addition to the vocation of service, to study the new didactic paradigms to display their reflective capacity and assume the commitment to acquire digital literacy to assume the requirements of a knowledge society which is increasingly globalized.

What drives innovation in renewable energy technology? Evidence based on patent counts

Science.gov (United States)

McCormick, Jesse

America's future economic growth and international competitiveness depend on our capacity to innovate, particularly in emerging global markets. This paper analyzes the forces that drive innovation in one such market, renewable energy technologies, utilizing the theory of induced technological innovation. Specifically, this paper operationalizes the determinants of innovation to consist of: 1) private market forces, 2) public policy that influences price and market size, and 3) public policy that catalyzes R&D investment. Analysis is conducted using a negative binomial regression to determine which of the three foundational determinants has the greatest impact on renewable energy innovation. In so doing this paper builds off of work conducted by Johnstone et al. (2010). Innovation is measured using European Patent Office data on a panel of 24 countries spanning the period from 1978-2005. The implications of this study are straightforward; policies, not market forces, are responsible for driving innovation in renewable energy technologies. Market-oriented policies are effective for mature technologies, particularly hydro, and to a lesser extent wind and solar power. R&D-oriented policy is effective for a broader technology set. In short, the United States needs a comprehensive policy environment to support renewable energy innovation; market forces alone will not provide the pace and breadth of innovations needed. That environment can and should be strategically targeted, however, to effectively allocate scare resources.

Fashion retail innovation: about context, antecedents and outcome in technological change projects

DEFF Research Database (Denmark)

Tambo, Torben

2015-01-01

Fashion retail is recognised for its strong capabilities in product innovation, while also having the potential to improve the governance of technology-based process innovation. This chapter proposes a model perspective in management of technology and innovation, including special requirements...... of fashion retailing. In particular, this chapter discusses the context of fashion retailing understood as product and brand-based characteristics. A case study-based methodology is then used to guide an analysis of antecedents and (expected) outcome of fashion retail innovation. IT-based innovation...... dominates, but innovation is suggested to include a broader scope of technologies. Contrary to innovation maturity models, this chapter proposes to consider innovation as a continuous refinement between dynamic capabilities and absorptive capacity where technologies must be adapted to the special...

The Kyoto mechanisms and technological innovation

International Nuclear Information System (INIS)

Lund, Henrik

2006-01-01

Climate change response, including the implementation of the Kyoto targets as the first step, calls for technological innovation of future sustainable energy systems. Based on the Danish case, this paper evaluates the type of technological change necessary. During a period of 30 years, Denmark managed to stabilize primary energy supply, and CO 2 emissions decreased by 10%, during a period of 20 years. However, after the introduction of the Kyoto Mechanisms, Denmark has changed its strategy. Instead of continuing the domestic CO 2 emission controls, Denmark plans to buy CO 2 reductions in other countries. Consequently, the innovative technological development has changed. This paper evaluates the character of such change and makes preliminary recommendations for policies to encourage the use of the Kyoto Mechanisms as an acceleration of the necessary technological innovation. (author)

Base technology development of new materials for FBR performance innovations

International Nuclear Information System (INIS)

Kano, Shigeki; Koyama, Masahiro; Nomura, Shigeo; Morikawa, Satoru; Ueno, Fumiyoshi

1989-01-01

This paper describes the base technology development of new materials for FBR performance innovations at the Power Reactor and Nuclear Fuel Development Corporation. The contents are as follows: (1) development of sodium and radiation resistant new materials, (2) development of high performance shielding material, (3) development of high performance control material, (4) development of new functional materials for reactor instrumentation. (author)

Demand pull and technology push perspective in technology-based innovations for the points of sale : the retailers evaluation

NARCIS (Netherlands)

Pantano, E.; Viassone, M.

Despite the consumers' increasing demand of technology-based innovations for making stores more appealing and the huge availability of advanced technologies, there is still a lack of research on the retailers' and employees' points of views towards the introduction of these systems. In fact, an

Research on the Synergy Degree of China Yangtze River Delta Region Technology Innovation System Evolution from the Perspective of Technology Innovation Chain

Directory of Open Access Journals (Sweden)

Xu Bin Feng

2014-08-01

Full Text Available Abstract: This paper divides technology innovation system into research and development input subsystem, technology research and development subsystem and technology application subsystem from the perspective of technology innovation chain, combining with the system theory. Then selects the corresponding ordinal variables, makes an empirical analysis to the synergy degree of Yangtze River delta regional technology innovation system evolution by complex system synergy degree model which based on the data of 2002-2009. The results show that the development of synergy degree of the technology innovation system appears a rising trend and the technology application subsystem is the key factor of direction and degree of synergy development in the evolution process of regional technology innovation system in the Yangtze River Delta of China. Finally, this paper analyzes the characteristics and causes of synergy degree’s evolution, and puts forward the corresponding policy recommendations to different problems.

Strategy of technology and innovation

International Nuclear Information System (INIS)

Kim, Yeon Min

1998-10-01

This book introduces strategy of technology and innovation which includes design and development of strategy of technology, performance of strategy of technology and building and practice of strategy of development. The contents of this book are form of industrial innovation, act in strategy, advantage of technical innovation, new perspective of studying and innovation, alliance with competitor, cost of transmission and innovation, learning cycle of new product and power of consistency of product.

National Strategies for Technological Innovation

Science.gov (United States)

Rossini, Frederick; Bozeman, Barry

1977-01-01

Considers the implications of the technological innovation literature for possible national strategies for innovation. Sketches highly generalized innovation strategies for nations at various levels of technological development. (Author/IRT)

The evolution of a company based on technological innovation. Gamesa

International Nuclear Information System (INIS)

Lopez Mielgo, N.

2007-01-01

This paper reviews the evolution of a company that has based its competitive strategy on technological innovation. Gamesa was established in 1976 and it has been continuously transforming its portfolio of businesses until it has become one of the main global operators in the field of wind turbine manufacturing. The firm was able to apply its technological capital in the emerging phase of the domestic wind energy industry. Once leadership in Spain was consolidated, Gamesa has developed an ambitious programme of sales and operational internationalisation, which has converted it in the number two producer of wind turbines worldwide. (Author)

The Management of Innovation and Technology

DEFF Research Database (Denmark)

Howells, John

in innovation - The reciprocal relationship between intellectual property law and technological innovation. - The role of technological skills and regimes of technological education in innovation. - An introduction to the role of the state in maintaining the innovative capacity of the private sector....... of the reality of taking decisions on innovation. The chapters cover: - The social context for individual acts of creative insight - The development of the technology-market relationship - The management of R&D and technological standards - Technological competition - The role of institutions of finance...

Examination of the bases for proposed innovations in reactor safety technology

International Nuclear Information System (INIS)

Moses, D.L.

1986-01-01

This paper employs the criteria for evaluations from the Nuclear Power Option Viability Study to examine the bases for proposed innovations in light water reactor safety technology. These bases for innovation fall into four broad categories as follows: (1) virtually exclusive reliance on passive safety features to preclude core damage in all situations, (2) design simplification using some passive safety features to reduce the frequency of core damage to less than about 10 -6 per reactor-year, (3) passive containment to preclude releases from any accident, and (4) designing to limit licensing attention to one or at least a few systems. Of these, only the first two, and perhaps only the second, hold significant promise for providing for the viability of advanced light water reactors

The Center for Environmental Technology Innovative Technology Screening Process

International Nuclear Information System (INIS)

Bertrand, C.M.

1995-02-01

The Center for Environmental Technology's (CET) mission is to provide a fully integrated system for accelerated evaluation, development, commercialization, and public acceptance of creative environmental solutions which match the foremost demands in today's environmentally sensitive world. In short, CET will create a means to provide quick, effective solutions for environmental needs. To meet this mission objective, CET has created a unique and innovative approach to eliminating the usual barriers in developing and testing environmental technologies. The approach paves the way for these emerging, cutting-edge technologies by coordinating environmental restoration and waste management activities of industry, universities, and the government to: efficiently and effectively transfer technology to these users, provide market-driven, cost-effective technology programs to the public and DOE, and aid in developing innovative ideas by initiating efforts between DOE facilities and private industry. The central part to this mission is selecting and evaluating specific innovative technologies for demonstration and application at United States Department of Energy (DOE) installations. The methodology and criteria used for this selection, which is called the CET Innovative Technology Screening Process, is the subject of this paper. The selection criteria used for the screening process were modeled after other DOE technology transfer programs and were further developed by CET's Technology Screening and Evaluation Board (TSEB). The process benefits both CET and the proposing vendors by providing objective selection procedures based on predefined criteria. The selection process ensures a rapid response to proposing vendors, all technologies will have the opportunity to enter the selection process, and all technologies are evaluated on the same scale and with identical criteria

Innovative technology demonstration

International Nuclear Information System (INIS)

Anderson, D.B.; Luttrell, S.P.; Hartley, J.N.; Hinchee, R.

1992-04-01

The Innovative Technology Demonstration (ITD) program at Tinker Air Force Base (TAFB), Oklahoma City, Oklahoma, will demonstrate the overall utility and effectiveness of innovative technologies for site characterization, monitoring, and remediation of selected contaminated test sites. The current demonstration test sites include a CERCLA site on the NPL list, located under a building (Building 3001) that houses a large active industrial complex used for rebuilding military aircraft, and a site beneath and surrounding an abandoned underground tank vault used for storage of jet fuels and solvents. The site under Building 3001 (the NW Test Site) is contaminated with TCE and Cr +6 ; the site with the fuel storage vault (the SW Tanks Site) is contaminated with fuels, BTEX and TCE. These sites and others have been identified for cleanup under the Air Force's Installation Restoration Program (IRP). This document describes the demonstrations that have been conducted or are planned for the TAFB

Patterns of technological innovation and evolution in the energy sector: A patent-based approach

International Nuclear Information System (INIS)

Lee, Kyungpyo; Lee, Sungjoo

2013-01-01

Given the ever-increasing pace and complexity of technological innovation in the energy sector, monitoring technological changes has become of strategic importance. One of the most common techniques for technology monitoring is patent analysis, which enables the identification of technological trends over time. However, few previous studies have carried out patent analysis in the energy sector. This study aims to explore patterns of innovation and of evolution in energy technologies, particularly focusing on similarities and differences across technologies. For this purpose, we first defined the relevant energy technologies and extracted the associated patent data from the United States Patents and Trademark Office (USPTO) and then adopted six patent indices and developed six patent maps to analyze their innovation characteristics. We then clustered energy technologies with similar characteristics, so defining innovation categories, and analyzed the changes in these characteristics over time to define their evolution categories. As one of the few attempts to investigate the overall trends in the energy sector's innovation and evolution, this study is expected to help develop an in-depth understanding of the energy industry, which will be useful in establishing technology strategies and policy in this rapidly changing sector. - Highlights: • We examined the patterns of innovation and evolution of energy technologies. • Six types of innovation patterns such as “competitive” or “mature” were identified. • Six types of evolution patterns such as “towards closed innovation” were identified. • The patterns of evolution were related to the patterns of innovation

Science, Technology, and Innovation Policy

DEFF Research Database (Denmark)

Lundvall, Bengt-Åke; Borrás, Susana

2005-01-01

This chapter is about what governments have done and could do to promote the production, diffusion, and use of scientific and technical knowledge in order to realize national objectives. We begin the chapter with "story-telling" based on sketchy historical facts. The aim of  the two stories...... is to illustrate that innovation policy covers a wide set of issues that have been on the agenda far back in history while still remaining important today. We move on to sketch the history of innovation policy, splitting it up into the three ideal types: science, technology, and innovation policy. We use OECD...

Technological literacy and innovation education

DEFF Research Database (Denmark)

Hansbøl, Mikala

Lately, in Denmark and internationally, there has been an increased focus on welfare technology and innovation. The Danish healthcare system is being fundamentally restructured and re-formed, the health professions are dealing with increased speed on the introductions of new political strategies...... on innovation education and educational activities fostering technological literacy. While focus on technological literacy has often (historically) taken a functionalist direction, and mainly been related to ICT and development of non- vocational curricula, more recent developments of approaches...... to technological literacy emphasizes profession oriented relational technological literacy. Furthermore, new definitions of 21st century competencies and skills emphasize creative learning and innovation skills and competencies as central ingredients in the 21st century labor market, and call for innovation...

IMPACT OF TECHNOLOGICAL INNOVATION ON THE GROWTH OF INTERNATIONALIZED SMALL ENTERPRISES: A CASE STUDY BASED ON TECH-BASED INTERNATIONALIZED SEAFOOD PROCESSING SMALL ENTERPRISES OF PUTTALAM DISTRICT IN SRI LANKA

Directory of Open Access Journals (Sweden)

W.M.S.N. Fernando

2018-03-01

Full Text Available The main aim of this study is to identify the impact of Technological Innovation (Technopreneurship on Enterprise Growth with special concern on tech-based internationally oriented Seafood Processing SEs in Puttalam district of Sri Lanka as the existing gap of this research’s scope is very much high in Puttalam district. This research considers mainly four types of Technological Innovation based on Machine Technology, Computerized Operations, Mobile Technologies and Other Communication Media Technologies. From the sample of 33 tech-based internationally oriented Seafood Processing SEs out of the total population of 39, primary data is collected using a questionnaire followed by a Descriptive plus an Ordered Logistic Regression Analysis was performed. According to the results, the growth of Machine Technology, Computerized Operations, Mobile Technologies and Other Communication Media based Technological Innovation (Technopreneurship lead for Enterprise Growth. The more current the extents of Machine, Computerized Operations, Mobile and Other Communication technologies, the higher the positive contribution for Technological Innovation performance. Also, the Machine Technology Usage is high thus the Innovation performance based on Machine Technology is almost 50% while the Computerized Operations Usage is low. Among the users, the Innovation performance is at a higher level. Present Mobile Technologies Usage is high, thus the Innovation performance based on Mobile Technologies is almost 55%. Though the Other Communication Media Usage is high, only 53% performed innovation. Inadequate finance, poor awareness on international market conditions, lack of the knowledge and trust along with inadequate infrastructure are identified as the main reasons for the lower orientation of internationally oriented Seafood Processing SEs. To promote tech-based internationally oriented Seafood Processing SEs in Puttalam district, providing tech-education among SE

Developing technology intelligence strategy to access knowledge of innovation clusters.

OpenAIRE

Rani Jeanne Dang; Letizia Mortara; Ruth Thomson; Tim Minshall

2010-01-01

Current times are characterised by a knowledge-based economy and fast technological change. In this difficult environment, companies compete to maintain a relevant position through innovation. In response to these challenges, many companies are currently adopting an open approach to innovation, pursuing innovation by combining internal and external resources. Technology intelligence (TI) activities support the implementation of open innovation with the systematic capture and delivery of infor...

Technological Innovation for China’s Logistics Industry

Directory of Open Access Journals (Sweden)

Chieh-Yu Lin

2008-01-01

Full Text Available China’s logistics industry has started to pay attention to adopt more efficient logistics technologies to provide better services for their customers. This paper employes the questionnaire survey to study the factors influencing the adoption of technological innovations by logistics service providers in China as well as the influences of technological innovation on supply chain performance. Technological innovations are categorized into data acquisition technologies, information technologies, warehousing technologies, and transportation technologies. The results show that the adoption of technological innovations is significantly influenced by technological, organizational and environmental factors, and adopting innovative technologies will increase supply chain performance for the logistics industry in China.

Innovative technology demonstrations

International Nuclear Information System (INIS)

Anderson, D.B.; Luttrell, S.P.; Hartley, J.N.

1992-08-01

Environmental Management Operations (EMO) is conducting an Innovative Technology Demonstration Program for Tinker Air Force Base (TAFB). Several innovative technologies are being demonstrated to address specific problems associated with remediating two contaminated test sites at the base. Cone penetrometer testing (CPT) is a form of testing that can rapidly characterize a site. This technology was selected to evaluate its applicability in the tight clay soils and consolidated sandstone sediments found at TAFB. Directionally drilled horizontal wells was selected as a method that may be effective in accessing contamination beneath Building 3001 without disrupting the mission of the building, and in enhancing the extraction of contamination both in ground water and in soil. A soil gas extraction (SGE) demonstration, also known as soil vapor extraction, will evaluate the effectiveness of SGE in remediating fuels and TCE contamination contained in the tight clay soil formations surrounding the abandoned underground fuel storage vault located at the SW Tanks Site. In situ sensors have recently received much acclaim as a technology that can be effective in remediating hazardous waste sites. Sensors can be useful for determining real-time, in situ contaminant concentrations during the remediation process for performance monitoring and in providing feedback for controlling the remediation process. Following the SGE demonstration, the SGE system and SW Tanks test site will be modified to demonstrate bioremediation as an effective means of degrading the remaining contaminants in situ. The bioremediation demonstration will evaluate a bioventing process in which the naturally occurring consortium of soil bacteria will be stimulated to aerobically degrade soil contaminants, including fuel and TCE, in situ

DEVELOPING TECHNOLOGICAL INNOVATIONS ON THE BASES OF THE WORLD PATENT INFORMATION

Directory of Open Access Journals (Sweden)

N. A. KAMENEVA

2015-04-01

Full Text Available To ensure the innovative growth and progressive economic performance in high-technology industries, or at least to keep them at a fixed level it is necessary for the industrial enterprises to conduct scientific research and inventive activities through developing technological innovations and also through supporting, completing, replenishing, updating one of the most important intangible components of the business – patent resources: protective documents on inventions, industrial designs, utility models, trademarks etc. Scientific-and-engineering information, contained in international patent funds, allows determining the world state of the art, registering and securing the company’s exclusive patent rights to the innovations. This work presents the method of obtaining patent information in Russia by means of using various Russian and international databases and abstract journals that can help to investigate the world state of art in a given technological field.

Technology Development and Innovation | Wind | NREL

Science.gov (United States)

Technology Development and Innovation Technology Development and Innovation Technology Development Technology Center (NWTC) supports efforts to reduce bird and bat fatalities at wind energy projects and photo of wind turbines at the National Wind Technology Center. Wildlife technology research and

school-based data and management of technological innovations

African Journals Online (AJOL)

PROF EKWUEME

innovations in public secondary schools in Cross River State. One hypothesis ... technology go hand in hand. Advances in ... Osika E. Okon, Department of Educational Administration and Planning, University of Calabar, Calabar, .... Science teachers in 50 middle schools located in five urban districts in the United States of.

Art technologies as possible propulsars in technological innovation

DEFF Research Database (Denmark)

Jørgensen, Lars Botin

2003-01-01

kind. This discussion, of general character, constitutes the initial part of this paper. Then it briefly looks into the final terms of the papertitle and try to relate to the diffuse and discussed technological innovation. Both aspects – art and technology and technological innovation – will be dealt...... with from a historical/hermeneutic and social constructivist point of view, as the paper moves from a general principal level to a more specific, exemplary level, where three different art technologies are presented as possible propulsars in technological innovation.......Art and technology has, as the German philosopher Martin Heidegger points out, the same etymological root. A thorough investigation of the relationship between art and technology will show how this same root has manifested itself in different times and spaces bringing results of the most variegated...

Stimulating technological innovation : problem identification and intervention formulation with the technological innovation systems framework

NARCIS (Netherlands)

Kieft, A.C.

2017-01-01

The technological innovation systems (TIS) framework provides a theory to understand under what conditions technological innovations are successfully developed and implemented. The objective of this dissertation is to further strengthen this TIS intervention framework, which is the part of the TIS

Shale gas technology innovation rate impact on economic Base Case – Scenario model benchmarks

International Nuclear Information System (INIS)

Weijermars, Ruud

2015-01-01

Highlights: • Cash flow models control which technology is affordable in emerging shale gas plays. • Impact of technology innovation on IRR can be as important as wellhead price hikes. • Cash flow models are useful for technology decisions that make shale gas plays economic. • The economic gap can be closed by appropriate technology innovation. - Abstract: Low gas wellhead prices in North America have put its shale gas industry under high competitive pressure. Rapid technology innovation can help companies to improve the economic performance of shale gas fields. Cash flow models are paramount for setting effective production and technology innovation targets to achieve positive returns on investment in all global shale gas plays. Future cash flow of a well (or cluster of wells) may either improve further or deteriorate, depending on: (1) the regional volatility in gas prices at the wellhead – which must pay for the gas resource extraction, and (2) the cost and effectiveness of the well technology used. Gas price is an externality and cannot be controlled by individual companies, but well technology cost can be reduced while improving production output. We assume two plausible scenarios for well technology innovation and model the return on investment while checking against sensitivity to gas price volatility. It appears well technology innovation – if paced fast enough – can fully redeem the negative impact of gas price decline on shale well profits, and the required rates are quantified in our sensitivity analysis

Smart space technology innovations

CERN Document Server

Chen, Mu-Yen

2013-01-01

Recently, ad hoc and wireless communication technologies have made available the device, service and information rich environment for users. Smart Space and ubiquitous computing extend the ""Living Lab"" vision of everyday objects and provide context-awareness services to users in smart living environments. This ebook investigates smart space technology and its innovations around the Living Labs. The final goal is to build context-awareness smart space and location-based service applications that integrate information from independent systems which autonomously and securely support human activ

Teachers in school-based technology innovations : A typology of their beliefs on teaching and technology

NARCIS (Netherlands)

Admiraal, Wilfried; Louws, Monika; Lockhorst, Ditte; Paas, Tineke; Buynsters, Michael; Cviko, Amina; Janssen, Caressa; de Jonge, Mario; Nouwens, Suzan; Post, Lysanne S.; van der Ven, Frauke; Kester, Liesbeth

2017-01-01

In many innovations in technology and education in secondary schools, teachers are the crucial agents of these innovations. To select, match and support groups of teachers for particular school projects, school principals could be supported with insights into teachers’ beliefs about teaching,

Innovative nuclear technologies based on radiation induced surface activation (RISA). 1. The project overview

International Nuclear Information System (INIS)

Fujisawa, Kyosuke; Morooka, Shinichi; Hishida, Mamoru

2004-01-01

This research of the Innovative nuclear technologies based on Radiation Induced Surface Activation (RISA) is due to start from 2003 and to be ended to 2006, and performed fund by Ministry of Economy, Trade and Industry (METI) Japan. One of the innovative technologies is to develop a high performance corrosion-proof film to prevent the surface of reactor internals from stress corrosion cracking (SCC), the other one is to develop the film for improving the heat transfer performance a high performance of the nuclear fuel rod. Both of these properties are derived under gamma ray irradiation by the RISA effect. This paper reports about the summary of this subsidy enterprise by METI. (author)

Innovative technology summary report: Innovative grouting and retrieval

International Nuclear Information System (INIS)

1998-10-01

Innovative grouting and retrieval (IGR) technology provides an innovative and cost-effective approach for full-pit and hot-spot retrieval of buried transuranic (TRU) waste sites and in situ disposal of buried waste with improved confinement. Innovative grouting technology: minimizes spreading of contamination by agglomerating the soil particles containing plutonium/americium particulates into nonaerosolizable particles; minimizes worker risks and exposure; is more effective in controlling the spread of contamination than common mining practices such as directed air flow, misting, and fixant sprays; eliminates further treatment because the grouted, rubberized waste is ready for shipment to the Waste Isolation Pilot Project (WIPP); reduces capital expenditures, operating costs, and containment structure requirements; and is an estimated five times faster than the baseline technology of removal, packaging, and storage

Innovate or imitate? Behavioural technological change

NARCIS (Netherlands)

Hommes, C.; Zeppini, P.

2013-01-01

We propose a behavioural model of technological change with evolutionary switching between boundedly rational costly innovators and free imitators, and study the endogenous interplay of innovation decisions, market price dynamics and technological progress. Innovation and imitation are strategic

Innovate or imitate? Behavioural technological change

NARCIS (Netherlands)

Hommes, C.; Zeppini, P.

2014-01-01

We propose a behavioural model of technological change with evolutionary switching between costly innovators and free imitators, and study the endogenous interplay of innovation decisions, market price dynamics and technological progress. Innovation and imitation are strategic substitutes and

The technological innovation case of the KAERI

Energy Technology Data Exchange (ETDEWEB)

Choi, J. I. [Habat Univ., Daejeon (Korea, Republic of); Jang, S. K. [Sungkonghoe Univ., Seoul (Korea, Republic of); Hong, K. P. [Baekseok Univ., Chunan (Korea, Republic of); Lee, E. S. [National Fusion Research Institue, Daejeon (Korea, Republic of)

2008-01-15

The research aims to investigate what key success factors (KSFs) of technological innovation in KAERI are, and to suggest how these findings are utilized for KAERI. In order to achieve these goals we have employed case study based on in-depth interview and literature review. And there are two fields of research in KAERI: one is nuclear energy-related research, the other is non energy-related research. The former is 'nuclear fuel cladding tube' which is an industrial product and being regarded as catch-up (or imitative) mode of technological innovation: the latter is 'HemoHIM', herbal composition of health functional food, which is consumer goods and regarded as creative (or innovative) mode of technological innovation. We found some KSFs in these two research and development cases in KAERI: firstly, to train researcher to be a 'product champion' who can fill in the gap of 'death valley' between pure research and commercialization: secondly, to build researchers' competency in order to catch up advanced countries' technological competencies. Thirdly, to amend institutional rules and regulations for commercializing processes of R and D outcomes, notably 'R and D joint venture by Government Research Institute (GRI) and private sector' fourthly, to enhance the capabilities of external management for researchers' technological innovation competency. And finally, we recommend using successful R and D cases as educational materials when training young researchers for sharing old generations' experiences and tacit knowledge.

The technological innovation case of the KAERI

International Nuclear Information System (INIS)

Choi, J. I.; Jang, S. K.; Hong, K. P.; Lee, E. S.

2008-01-01

The research aims to investigate what key success factors (KSFs) of technological innovation in KAERI are, and to suggest how these findings are utilized for KAERI. In order to achieve these goals we have employed case study based on in-depth interview and literature review. And there are two fields of research in KAERI: one is nuclear energy-related research, the other is non energy-related research. The former is 'nuclear fuel cladding tube' which is an industrial product and being regarded as catch-up (or imitative) mode of technological innovation: the latter is 'HemoHIM', herbal composition of health functional food, which is consumer goods and regarded as creative (or innovative) mode of technological innovation. We found some KSFs in these two research and development cases in KAERI: firstly, to train researcher to be a 'product champion' who can fill in the gap of 'death valley' between pure research and commercialization: secondly, to build researchers' competency in order to catch up advanced countries' technological competencies. Thirdly, to amend institutional rules and regulations for commercializing processes of R and D outcomes, notably 'R and D joint venture by Government Research Institute (GRI) and private sector' fourthly, to enhance the capabilities of external management for researchers' technological innovation competency. And finally, we recommend using successful R and D cases as educational materials when training young researchers for sharing old generations' experiences and tacit knowledge

Composite science and technology innovation index

International Nuclear Information System (INIS)

2011-02-01

This book reports the composite science and technology innovation index with the purpose, process, conception and, the method of evaluation. It also indicates the result of composite science and technology innovation index in 2010, which itemizes the result according to resource, activity network, environment and outcome. The last part records analysis of science and technology innovation in Korea and development plan with various analysis.

Challenges to the Indicators on Science, Technology and Innovation Development

OpenAIRE

Chobanova, Rossitsa

2006-01-01

The paper attempts to define the challenges to the indicators on science, technology and innovation development which result from the contemporary dynamics of the global knowledge based economy progress and the pursued challenges of identification of the specific national priority dimensions for public funding research and innovation projects on the case of Bulgaria. It is argued that recent the most widespread methodologies of positioning science, technology and innovation indicators do not ...

Modernization of the Russian Automobile Road Network on the Base of Innovative Technologies

Directory of Open Access Journals (Sweden)

E. A. Zhukov

2017-01-01

Full Text Available Purpose: the main goal of the article is to build a conceptual model for the organization of effective functioning of the points of economic and innovative growth of the region in modern conditions, taking into account regional and municipal limitations of internal and external nature, with the aim of ensuring economic security, effective interaction of subjects of the "business-power" system Taking into account the influence of institutional factors. Methods: in the present study the following methods were used: systemic approach, methods of social diagnosis, comparative analysis, method of expert evaluations, and method of statistical processing of information. Results: the short characteristic of modern development and technical level of the Russian automobile roads network as the important part of the automobile roads material-technical base is presented. Realization process of the actual task putted by Russian President V.V. Putin to transport builders: two times increasing construction of automobile roads is analyzed. The reality of decision this task due to modernization roads economy material-technical base on the base of innovative technologies and progressive world experience in the field of roads construction is scientifically proved. Conclusions and Relevance: in spite of losing now in decision of the actual task putted by Russian President V.V. Putin to transport builders: two times increasing construction of automobile roads, nevertheless the real possibilities to reach the important aim still remain. It may be done only due to scientifically grounded modernization of the roads economy material-technical base on the base of innovative technologies and progressive world experience in the field of roads construction 

Science and Technology Innovation for the Base of the Pyramid ...

International Development Research Centre (IDRC) Digital Library (Canada)

Indeed, some technological advances appear to have exacerbated the gap between them. The question is, how can science and technology (S&T) innovation be brought to bear on the needs of the poor? This project will endeavor to address the development needs of the poor and excluded in six Southeast Asian countries ...

ASSESSMENT OF QUALITY OF INNOVATIVE TECHNOLOGIES

OpenAIRE

Larisa Alexejevna Ismagilova; Nadegda Aleksandrovna Sukhova

2016-01-01

We consider the topical issue of implementation of innovative technologies in the aircraft engine building industry. In this industry, products with high reliability requirements are developed and mass-produced. These products combine the latest achievements of science and technology. To make a decision on implementation of innovative technologies, a comprehensive assessment is carried out. It affects the efficiency of the innovations realization. In connection with this, the assessment of qu...

Innovation Value of Information Technology: Impact of Information Technology--Intensity on Innovation Capability and Firm Performance

Science.gov (United States)

Ramamani, Mahesh Kumar

2010-01-01

Though information technology adoptions have been always referred to as innovations in firms, much of the business value literature has concentrated on the tangible and immediately measurable impacts of information technology (IT) adoptions. This study aims to explore the impact of information technology investments on the innovativeness of a…

Management capabilities, innovation, and gender diversity in the top management team: An empirical analysis in technology-based SMEs

OpenAIRE

Ruiz-Jiménez, Jenny María; Fuentes-Fuentes, María del Mar

2016-01-01

The paper analyzes the influence of management capabilities on the innovation performance of technology-based SMEs and the role that gender diversity in the top management team plays in this relationship. We use a sample of 205 Spanish SMEs from technology sectors and a hierarchical regression analysis to test our hypotheses. The results confirm that management capabilities affect both product and process innovation positively. In addition, gender diversity in the top management team moderate...

Understanding Consumer’s Acceptance of Technology-Based Innovations in Retailing

Directory of Open Access Journals (Sweden)

Eleonora Pantano

2012-12-01

Full Text Available The availability of a huge number of studies about the Technology Acceptance Model (TAM for predicting consumer’s acceptance and usage of innovations in points of sale motivates writing of the present. Review, with emphasis on the new variables integrated in the traditional model. This is concerned with a synthesis of the current progresses in the field, thus offering a unified view of consumers’ behaviour towards new technical solutions. Such  synthesis is achieved from an extensive literature analysis, including computer science, innovation, human-computer interaction, and technology management perspectives. For each case, both opportunities and issues are outlined in order to advance the current knowledge and highlight what practitioners and scholars should take into account for developing new and efficient corporate strategies.

Technological progress and effects of (supra) regional innovation and production collaboration. An agent-based model simulation study.

NARCIS (Netherlands)

Vermeulen, B.; Pyka, A.; Serguieva, A.; Maringer, D.; Palade, V.; Almeida, R.J.

2014-01-01

We provide a novel technology development model in which economic agents search for transformations to build artifacts. Using this technology development model, we conduct an agent-based model simulation study on the effect of (supra-)regional collaboration in production and innovation on

Innovation in Construction: Learning Processes in implementing new Technologies

DEFF Research Database (Denmark)

Clausen, Lennie

1999-01-01

The article is concerned with the question: How do construction firms implement new technology on construction projects? A model of the implementation process is presented based on a review of the construction innovation literature, innovation theory, and organisational learning theories....

Achievements of Theoretical Research on Chinese Technological Innovation

Directory of Open Access Journals (Sweden)

Wang Hanxi

2017-01-01

Full Text Available Using the CNKI database as the sample source, we investigated the makeup of current research results on Chinese technological innovation, and found that the study of Chinese technological innovation consists of nine directions - underlying principles of innovation behavior, concepts of innovation cognition, methods of innovation, behavior of innovation subjects, structure of innovation mediators, innovation capacity, public service system of innovation, policy support system of innovation, and cultural environment of innovation, as well as several issues of innovation, including its behavior mechanism, operational mechanism, work mechanism, modes of implementation, modes of mathematical representation, modes of physical representation, modes of behavioral representation, modes of performance representation, modes of function realization, modes of structure realization, modes of workflow realization, modes of carrier realization, etc. Such a scattered makeup requires us to formulate the system of Chinese technological innovation achievements from the perspective of philosophy of science. This will be an important mission in the study of Chinese technological innovation.

Efficiency of the supply chain collaborative technological innovation in China: An empirical study based on DEA analysis

Directory of Open Access Journals (Sweden)

Huaping Zhang

2015-11-01

Full Text Available Purpose: This paper is an attempt to investigate the current issues and development of the supply chain collaborative technological innovation in China. Design/methodology/approach: DEA is employed to measure the efficiency of the supply chain collaborative technological innovation. Findings: From the results of this research, we can get the conclusion that there are big spaces for improvement for the selected companies in terms of supply chain collaborative technological innovation, especially in the collaborative benefit aspect. The efficiencies of the supply chain collaborative technological innovation in the selected companies vary a lot. Research limitations: More industries are needed to generalize the conclusions. Practical implications: Our practical recommendations for improving supply chain companies in terms of improving their collaborative technological innovation efficiency are: (1 expanding the cooperative scope; (2 optimizing the collaboration operations; (3 improving the compactness in supply chain; (4 increasing the innovation input; and (5 improving the knowledge exchange capacity. Originality/value: The evaluation and the measure of the efficiency of performance of the collaborative technological innovation both in theory and in practice have been proven to be very important and quite complex, and there have been limited researches in the current literature. From observations, however, the efficiency of supply chain collaborative technological innovation is relatively low. This research investigates the current issues and development of the supply chain collaborative technological innovation in China, and provides the guideline in terms of improving the efficiency of supply chain collaborative technological innovation.

Technological Innovations in Forensic Genetics

DEFF Research Database (Denmark)

Wienroth, Matthias; Morling, Niels; Williams, Robin

2014-01-01

This paper discusses the nature of four waves of technological innovations in forensic genetics alongside the social, legal and ethical aspect of these innovations. It emphasises the way in which technological advances and their socio-legal frameworks are co-produced, shaping technology...... expectations, social identities, and legal institutions. It also considers how imagined and actual uses of forensic genetic technologies are entangled with assertions about social order, affirmations of common values and civil rights, and promises about security and justice. Our comments seek to encourage...

Innovation investment area: Technology summary

Energy Technology Data Exchange (ETDEWEB)

1994-03-01

The mission of Environmental Management`s (EM) Office of Technology Development (OTD) Innovation Investment Area is to identify and provide development support for two types of technologies that are developed to characterize, treat and dispose of DOE waste, and to remediate contaminated sites. They are: technologies that show promise to address specific EM needs, but require proof-of-principle experimentation; and (2) already proven technologies in other fields that require critical path experimentation to demonstrate feasibility for adaptation to specific EM needs. The underlying strategy is to ensure that private industry, other Federal Agencies, universities, and DOE National Laboratories are major participants in developing and deploying new and emerging technologies. To this end, about 125 different new and emerging technologies are being developed through Innovation Investment Area`s (IIA) two program elements: RDDT&E New Initiatives (RD01) and Interagency Agreements (RD02). Both of these activities are intended to foster research and development partnerships so as to introduce innovative technologies into other OTD program elements for expedited evaluation.

Innovation investment area: Technology summary

International Nuclear Information System (INIS)

1994-03-01

The mission of Environmental Management's (EM) Office of Technology Development (OTD) Innovation Investment Area is to identify and provide development support for two types of technologies that are developed to characterize, treat and dispose of DOE waste, and to remediate contaminated sites. They are: technologies that show promise to address specific EM needs, but require proof-of-principle experimentation; and (2) already proven technologies in other fields that require critical path experimentation to demonstrate feasibility for adaptation to specific EM needs. The underlying strategy is to ensure that private industry, other Federal Agencies, universities, and DOE National Laboratories are major participants in developing and deploying new and emerging technologies. To this end, about 125 different new and emerging technologies are being developed through Innovation Investment Area's (IIA) two program elements: RDDT ampersand E New Initiatives (RD01) and Interagency Agreements (RD02). Both of these activities are intended to foster research and development partnerships so as to introduce innovative technologies into other OTD program elements for expedited evaluation

Socio-economic research for innovative energy technologies

Energy Technology Data Exchange (ETDEWEB)

Ogawa, Yuichi [Tokyo Univ., High Temperature Plasma Center, Kashiwa, Chiba (Japan); Okano, Kunihiko [Central Research Inst. of Electric Power Industry, Tokyo (Japan)

2006-10-15

In the 21st century global environment and energy issues become very important, and this is characterized by the long-term (in the scale of a few tens years) and world-wide issue. In addition, future prospect of these issues might be quite uncertain, and scientific prediction could be very difficult. For these issues vigorous researches and various efforts have been carried out from various aspects; e.g., world-wide discussion such as COP3 in Kyoto, promotion of the energy-saving technology and so on. Development of environment-friendly energy has been promoted, and new innovative technologies are explored. Nuclear fusion is, of course, a promising candidate. While, there might be some criticism for nuclear fusion from the socio-economic aspect; e.g., it would take long time and huge cost for the fusion reactor development. In addition, other innovative energy technologies might have their own criticism, as well. Therefore, socio-economic research might be indispensable for future energy resources. At first we have selected six items as for the characteristics, which might be important for future energy resources; i.e., energy resource, environmental load, economics, reliability/stability, flexibility on operation and safety/security. Concerning to innovative energy technologies, we have nominated seven candidates; i.e., advanced coal technology with CO2 recovery system, SOFC top combined cycle, solar power, wind power, space solar power station, advanced fission and fusion. Based on questionnaires for ordinary people and fusion scientists, we have tried to assess the fusion energy development, comparing with other innovative energy technologies. (author)

Technological Innovation, R & D Activities and Innovation System Between Organizations

Directory of Open Access Journals (Sweden)

Jonas Pedro Fabris

2015-08-01

Full Text Available This theoretical paper aimed to explicit, through the rescue of theoretical assumptions, the innovation, the innovation system, and the research and development (R & D activities. The innovation, especially technological innovation, is now seen as essential in differentiation strategies, competitiveness and growth in a greater number of businesses. Innovation is not only the result of financial investments by companies. For it to exist, it is necessary the existence of innovative capacity that should be present at all stages of the innovation process, and a favorable institutional environment and, increasingly, of specific incentive policies. That is, there are internal and external factors to companies and other institutions involved in the process. Innovation systems were discovered to resolve the variations in the degree of competitiveness of different economies and, above all, in relation to the technological performance and the ability to innovate these economies face the growing importance of international markets for high-tech products. Thus, it was found that successful innovators are not successful just because of their personal qualities and actions but as a result of their interaction with research and innovation systems that inhabit the quality of such systems.

Resource recycling as new field for innovative technologies

Directory of Open Access Journals (Sweden)

Kamenik L.L.

2017-01-01

Full Text Available This study substantiates the necessity of transition from the natural resource model of socioeconomic development towards an industrially reproducible type of raw material, which is particularly relevant in the context of the global resource crisis. The key role of innovative technologies in the solution to this problem is questioned. Theoretical and methodological principles of the modern economy functioning are examined based on the resource factor. A new concept of “resource recycling”, which reflects industrial resource recovery, is introduced. An innovative model of a resource base for economic reproduction is provided, the necessity of transition from the existing linear economic model towards a closed resource cycle model is shown, and three resource cycle models are examined in terms of their objectives, forms, and content. The major problems in the implementation of the innovative model and ways of solving them are defined, which makes it possible to reduce the risk of a resource provision crisis. The conclusion that resource recycling serves as a new sphere of innovative technologies is substantiated. The historical analogy method and the evolutionary systems approach are used.

Stimulating technological innovation : problem identification and intervention formulation with the technological innovation systems framework

OpenAIRE

Kieft, A.C.

2017-01-01

The technological innovation systems (TIS) framework provides a theory to understand under what conditions technological innovations are successfully developed and implemented. The objective of this dissertation is to further strengthen this TIS intervention framework, which is the part of the TIS theoretical framework that facilitates the identification of inhibiting problems and the formulation of interventions. Theoretical adaptations and extensions are proposed and their merits subsequent...

OPEN INNOVATION PROJECT: THE SYSTEM OF ONLINE INDICATORS IN SCIENCE, TECHNOLOGY AND INNOVATION OF AMAZONAS (SiON

Directory of Open Access Journals (Sweden)

Moises Andrade Coelho

2016-05-01

Full Text Available This study aims to evaluate the implementation of an open innovation project in a public institution in the state of Amazonas. The theoretical and empirical background deals with science, technology and innovation indicators and open innovation. The study is characterized as a qualitative and descriptive research, with the case study as a methodological procedure. The delimitation of the universe was composed by a public institution in the area of science, technology and innovation (ST&I. In the case study, it was used an approach as tool to assess the implementation of open innovation projects. The results are shown several stages of open innovation project analyzed.  The study demonstrates the implications of open innovation project adoption to the strengthening of external networks and the maturing of the internal environment. The relevance of the study is based on the evaluation of an open innovation project in a public institution in order to foster the transition from traditional innovation processes to open innovation processes.

Patent based innovation and development: issues, challenges and future

International Nuclear Information System (INIS)

Noraini Ibrahim

2001-01-01

The main purpose of this paper is to analyse the extent to which science and technology (S and T) policy has been integrated to patent based innovation within the context of national development objective. Could the institutionalisation of patent based innovation in Malaysia be effectively implemented ? The main argument is that patent based innovation must be integrated into the national S and T policy as a dynamic and proactive system. This paper argued that the dependency has an effect to the consequent of relationship imbalance between Malaysia and advanced nations as the main technology supplier within the international business economy. This paper adopts the interdisciplinary of social sciences using system-oriented analysis. The objective of the S and T is to enhance the capacity of national S and T resources as well as to develop the capacity of the local to select, negotiate, adopt, modify, and improve imported technology. Nevertheless, even though the S and T policy was launched in 1986, the impetus of government commitment towards the realisation of S and T policy became more pronounced only in the middle of the 90s. The Ministry of Sciences, Technology and Environment recognises the importance of creating a climate of science and technology as a critical prerequisite for national development. Various activities at the state and national levels have been organised to promote awareness and adoption of technology to the community. The Ministry that acts as the secretariat to the National Science and Development Council aims to reinforce the foundation based on S and T activities. Malaysia also should encourage activities that general technical innovations that would be integrated into patent based innovation as one of the component in the national innovation system. While this is so, an effective assimilation of technical innovation that is developed within the framework of the national innovation system is yet to be realised. Patent based innovation as a

Adding Entrepreneurship to India’s Science, Technology & Innovation Policy

Directory of Open Access Journals (Sweden)

Ragini Chaurasia

2016-06-01

Full Text Available Science, Technology & Innovation Policy (STIP is an important policy instrument particularly in the developing countries. India also has recognized the role of science, technology and innovation in development as early as 1958 but still trails behind its peer Brazil, China and the Asian tiger Singapore. Considering strong correlation between research and development investment and growth based on existing studies, this paper brings forth the present situation of India in investment and its influence on the performance of the economy vis-à-vis the three countries. This paper studies the STIP 2013 in detail and reports the contribution of the Department of Science and Technology in India. The main conclusion of this paper is the recommendation for incorporation of “entrepreneurship” in STIP based on global best practices, which can be achieved by government’s involvement as a venture capitalist to seed and support innovations, increasing transparency and incorporating entrepreneurial curriculum.

Combining the technological innovation systems framework with the entrepreneurs’ perspective on innovation

NARCIS (Netherlands)

Planko, Julia; Cramer, Jacqueline; Hekkert, Marko P.; Chappin, Maryse M H

2017-01-01

For their technological sustainability innovations to become successful, entrepreneurs can strategically shape the technological field in which they are involved. The technological innovation systems (TISs) literature has generated valuable insights into the processes which need to be stimulated for

Innovative Technologies for the Solution of Environmental Problems in the World Community

Directory of Open Access Journals (Sweden)

T. K. Usmanova

2017-01-01

Full Text Available Purpose: the purpose of the article is the disclosure of environmental problems and prospects commercialization of intellectual property within development of innovative information technologies in the conditions of integration of economies into the world economy, identification of opportunities of forming, organization, financing, management, ownership, commercialization and protection of innovative technologies and intellectual property. Relevance of the chosen subject is caused by the current state of ecology and problems of commercialization of intellectual property in development of innovative information technologies within the conditions of integration of economies into the world economy. The existing changes of the current legislation and tendencies of development of the industry of innovative information technologies in field of ecology in the Russian Federation require cardinal review because of its low competitiveness. Ensuring sustainable development of the country directly depends on implementation of innovative information technologies, not only within the sphere of ecology, but also in all industries of the national economy of Russia. Especially important direction of development of innovations is the field of information technologies with its further implementation in innovative productions and provision of services with a focus on protection of ecology and healthcare. Methods: the methodology of the solution of objectives is based on usage of a method of dialectic research, methods of the economic analysis, forecasting, the situational and systemic analysis, expert evaluations and the analysis of empirical data. Results: in the process of researching the direction of solving environmental problems, the author studied foreign and Russian programs based on innovative technologies in this field and identified current proposals regarding the practical implementation of partnerships in the form of Public Private Partnerships PPPs

Innovative technologies for powder metallurgy-based disk superalloys: Progress and proposal

Science.gov (United States)

Chong-Lin, Jia; Chang-Chun, Ge; Qing-Zhi, Yan

2016-02-01

Powder metallurgy (PM) superalloys are an important class of high temperature structural materials, key to the rotating components of aero engines. In the purview of the present challenges associated with PM superalloys, two novel approaches namely, powder preparation and the innovative spray-forming technique (for making turbine disk) are proposed and studied. Subsequently, advanced technologies like electrode-induction-melting gas atomization (EIGA), and spark-plasma discharge spheroidization (SPDS) are introduced, for ceramic-free superalloy powders. Presently, new processing routes are sought after for preparing finer and cleaner raw powders for disk superalloys. The progress of research in spray-formed PM superalloys is first summarized in detail. The spray-formed superalloy disks specifically exhibit excellent mechanical properties. This paper reviews the recent progress in innovative technologies for PM superalloys, with an emphasis on new ideas and approaches, central to the innovation driving techniques like powder processing and spray forming. Project supported by the National Natural Science Foundation of China (Grant Nos. 50974016 and 50071014).

Innovative technological paradigm-based approach towards biofuel feedstock

International Nuclear Information System (INIS)

Xu, Jiuping; Li, Meihui

2017-01-01

Highlights: • DAS was developed through an innovative approach towards literature mining and technological paradigm theory. • A novel concept of biofuel feedstock development paradigm (BFDP) is proposed. • The biofuel production diffusion velocity model gives predictions for the future. • Soft path appears to be the driving force for the new paradigm shift. • An integrated biofuel production feedstock system is expected to play a significant role in a low-carbon sustainable future. - Abstract: Biofuels produced from renewable energy biomass are playing a more significant role because of the environmental problems resulting from the use of fossil fuels. However, a major problem with biofuel production is that despite the range of feedstock that can be used, raw material availability varies considerably. By combining a series of theories and methods, the research objective of this study is to determine the current developments and the future trends in biofuel feedstock. By combining technological paradigm theory with literature mining, it was found that biofuel feedstock production development followed a three-stage trajectory, which was in accordance with the traditional technological paradigm – the S-curve. This new curve can be divided into BFDP (biofuel feedstock development paradigm) competition, BFDP diffusion, and BFDP shift. The biofuel production diffusion velocity model showed that there has been constant growth from 2000, with the growth rate reaching a peak in 2008, after which time it began to drop. Biofuel production worldwide is expected to remain unchanged until 2030 when a paradigm shift is expected. This study also illustrates the results of our innovative procedure – a combination of the data analysis system and the technological paradigm theory – for the present biofuel feedstock soft path that will lead to this paradigm shift, with integrated biofuel production feedstock systems expected to be a significant new trend.

Innovative activity of high-technology companies as assessment and forecasting object

Directory of Open Access Journals (Sweden)

A. E. Sklyarov

2016-01-01

Full Text Available Innovation activities, as well as innovations, are closely related meanings, and like many others economical definitions, have a broad range of meanings. Main characteristics and attributes of innovation involves new or significantly improved product, that’s being used, or in other words, found its application, and innovative activities – activities focused on realization of innovations. In this article, innovations are mainly considered in terms of high-technology production, evidence from Russian space industry. There are 5 basic stages of lifecycle of innovative project in considered industry: initiation, development, realization, expansion, consumption. Practically, third or fourth, or even both of these stages, often missing because there is no need of them. R&D activities, or even further serial production, based on previous developments, is an innovation activity, because these activities are stages of innovative projects lifecycle itself. Then it seems legit, to draw a conclusion, that in terms of high-technology production, company’s primary activity equals innovative activity. Basic characteristics of innovative activity of high-technology companies as assessment and forecasting object involves high level of uncertainty at every stage of projects lifecycle, high dependency on funding level of this activity, and high level and erratic structure of risk. All the above mentioned, means that assessment and forecasting of innovative activity of high-technology companies, needs development of its own methodological tools for each industry.

Management of the Technological Innovation Process in Software Companies from Sinaloa, Mexico

Directory of Open Access Journals (Sweden)

Alejandra MIRANDA FELIX

2016-06-01

Full Text Available The objective of this paper is to explain the management process of technological innovation within certified software companies from Sinaloa, considering their strategic technology plan, innovative processes, and intellectual capital. This work is based on the study of 9 software companies located in Sinaloa and certified through the CMMI (Capability Maturity Model for Integration process. Their problems are grouped into three areas: 1 strategic technology plan, 2 innovation and 3 intellectual capital. We propose a model of innovation management to explain and evaluate the integration of those three areas applying a mixed methodology, theoretical foundations, and the analysis of the results. The overall results reveal that the certified software companies from Sinaloa manage innovation informally, through an internal, costly and independent innovation process without considering alliances with other companies, educational institutions, government agencies, technology parks or research and development centers.

The integration of innovative technologies into a physical-separation-based soil washing system

International Nuclear Information System (INIS)

Krstich, M.A.

1995-01-01

An innovative system's approach to the treatment of soils at the Fernald Environmental Management Project (FEMP) has been proposed to effectively and cost competitively treat a significant mass of soil. The use of an integrated soil treatment system to decontaminate FEMP soils is a unique application of the soil washing technology. Due to the unfavorable soil particle size distribution and the ubiquitous distribution of uranium among these particle size fractions, conventional soil washing processes commonly used on predominantly sandy soils alone may not achieve the desirable waste minimization level without the inclusion of innovative technologies. This objective of this paper is to briefly describe the physical separation and chemical extraction process commonly used in soil washing operation and to present the baseline soil washing approach used on FEMP soils. Noting the successful and not-so-successful processes within the soil washing operation at the FEMP, a proposed innovative system's approach to treating FEMP soils will be described. This system's approach will integrate a conventional soil washing operation with proposed innovative technologies

Research on knowledge support technology for product innovation design based on quality function knowledge deployment

Directory of Open Access Journals (Sweden)

Kai Zhang

2016-06-01

Full Text Available Based on the analysis of the relationship between the process of product innovation design and knowledge, this article proposes a theoretical model of quality function knowledge deployment. In order to link up the product innovation design and the knowledge required by the designer, the iterative method of quality function knowledge deployment is refined, as well as the knowledge retrieval model and knowledge support model based on quality function knowledge deployment are established. In the whole life cycle of product design, in view of the different requirements for knowledge in conceptual design stage, components’ configuration stage, process planning stage, and production planning stage, the quality function knowledge deployment model could link up the required knowledge with the engineering characteristics, component characteristics, process characteristics, and production characteristics in the four stages using the mapping relationship between the function characteristics and the knowledge and help the designer to track the required knowledge for realizing product innovation design. In this article, an instance about rewinding machine is given to demonstrate the practicability and validity of product innovation design knowledge support technology based on quality function knowledge deployment.

Studying Innovation Technologies in Modern Education

Science.gov (United States)

Stukalenko, Nina M.; Zhakhina, Bariya B.; Kukubaeva, Asiya K.; Smagulova, Nurgul K.; Kazhibaeva, Gulden K.

2016-01-01

In modern society, innovation technologies expand to almost every field of human activity, including such wide field as education. Due to integrating innovation technologies into the educational process practice, this phenomenon gained special significance within improvement and modernization of the established educational system. Currently, the…

Rethinking the Market - Technology Relationship for Innovation

DEFF Research Database (Denmark)

Howells, John

This paper revisits the 'what causes innovation - market pull or technology push?' debate to argue that the conceptualisation is flawed and that the firm is the only 'agent' capable of innovative action. The paper differentiates between 'use', 'need' and 'intended use' to obtain greater precision...... with respect to the technology-market matching process that is fundamental to innovation. The validity of the approach is demonstrated through empirical examples. These examples also show the value of distinguishing between two types of market concept used by the innovating firm. These are the 'reference...... market' which is a traded product that is a principal source of 'use' ideas for the mental construction of the 'innovation market' concept. It is the latter that can be thought to guide the construction of innovative production technology....

Unmet needs: relevance to medical technology innovation?

Science.gov (United States)

McCarthy, Avril D; Sproson, Lise; Wells, Oliver; Tindale, Wendy

2014-01-01

This paper describes and discusses the role of unmet needs in the innovation of new medical technologies using the National Institute for Health Research Devices for Dignity (D4D) Healthcare Technology Co-operative as a case study. It defines an unmet need, providing a spectrum of classification and discusses the benefits and the challenges of identifying unmet need and its influence on the innovation process. The process by which D4D has captured and utilized unmet needs to drive technology innovation is discussed and examples given. It concludes by arguing that, despite the challenges, defining and reviewing unmet need is a fundamental factor in the success of medical technology innovation.

Making technological innovation work for sustainable development

Science.gov (United States)

Anadon, Laura Diaz; Harley, Alicia G.; Matus, Kira; Moon, Suerie; Murthy, Sharmila L.

2016-01-01

This paper presents insights and action proposals to better harness technological innovation for sustainable development. We begin with three key insights from scholarship and practice. First, technological innovation processes do not follow a set sequence but rather emerge from complex adaptive systems involving many actors and institutions operating simultaneously from local to global scales. Barriers arise at all stages of innovation, from the invention of a technology through its selection, production, adaptation, adoption, and retirement. Second, learning from past efforts to mobilize innovation for sustainable development can be greatly improved through structured cross-sectoral comparisons that recognize the socio-technical nature of innovation systems. Third, current institutions (rules, norms, and incentives) shaping technological innovation are often not aligned toward the goals of sustainable development because impoverished, marginalized, and unborn populations too often lack the economic and political power to shape innovation systems to meet their needs. However, these institutions can be reformed, and many actors have the power to do so through research, advocacy, training, convening, policymaking, and financing. We conclude with three practice-oriented recommendations to further realize the potential of innovation for sustainable development: (i) channels for regularized learning across domains of practice should be established; (ii) measures that systematically take into account the interests of underserved populations throughout the innovation process should be developed; and (iii) institutions should be reformed to reorient innovation systems toward sustainable development and ensure that all innovation stages and scales are considered at the outset. PMID:27519800

Making technological innovation work for sustainable development.

Science.gov (United States)

Anadon, Laura Diaz; Chan, Gabriel; Harley, Alicia G; Matus, Kira; Moon, Suerie; Murthy, Sharmila L; Clark, William C

2016-08-30

This paper presents insights and action proposals to better harness technological innovation for sustainable development. We begin with three key insights from scholarship and practice. First, technological innovation processes do not follow a set sequence but rather emerge from complex adaptive systems involving many actors and institutions operating simultaneously from local to global scales. Barriers arise at all stages of innovation, from the invention of a technology through its selection, production, adaptation, adoption, and retirement. Second, learning from past efforts to mobilize innovation for sustainable development can be greatly improved through structured cross-sectoral comparisons that recognize the socio-technical nature of innovation systems. Third, current institutions (rules, norms, and incentives) shaping technological innovation are often not aligned toward the goals of sustainable development because impoverished, marginalized, and unborn populations too often lack the economic and political power to shape innovation systems to meet their needs. However, these institutions can be reformed, and many actors have the power to do so through research, advocacy, training, convening, policymaking, and financing. We conclude with three practice-oriented recommendations to further realize the potential of innovation for sustainable development: (i) channels for regularized learning across domains of practice should be established; (ii) measures that systematically take into account the interests of underserved populations throughout the innovation process should be developed; and (iii) institutions should be reformed to reorient innovation systems toward sustainable development and ensure that all innovation stages and scales are considered at the outset.

Technology and Innovation in Adult Learning

Science.gov (United States)

King, Kathy P.

2017-01-01

"Technology and Innovation in Adult Learning" introduces educators and students to the intersection of adult learning and the growing technological revolution. Written by an internationally recognized expert in the field, this book explores the theory, research, and practice driving innovation in both adult learning and learning…

Feasibility studies and technological innovation

DEFF Research Database (Denmark)

Hvelplund, Frede Kloster; Lund, Henrik; Sukkumnoed, Decharut

2004-01-01

The chapter offers a tool to conduct feasibility studies and focuses on how to make feasibility studies in a situation with environmental concerns, in which technological innovation and institutional chnages are among the objectives.......The chapter offers a tool to conduct feasibility studies and focuses on how to make feasibility studies in a situation with environmental concerns, in which technological innovation and institutional chnages are among the objectives....

Management capabilities, innovation, and gender diversity in the top management team: An empirical analysis in technology-based SMEs

Directory of Open Access Journals (Sweden)

Jenny María Ruiz-Jiménez

2016-04-01

Full Text Available The paper analyzes the influence of management capabilities on the innovation performance of technology-based SMEs and the role that gender diversity in the top management team plays in this relationship. We use a sample of 205 Spanish SMEs from technology sectors and a hierarchical regression analysis to test our hypotheses. The results confirm that management capabilities affect both product and process innovation positively. In addition, gender diversity in the top management team moderates this relationship positively. In other words, management capabilities have a greater influence on both product and process innovation when the management team is more balanced in number of men and women. This study contributes to better understanding of the factors that explain how management capabilities translate into greater organizational achievements and argues the need to analyze the role of top management teams and their composition more extensively, especially in the context of technology SMEs. The study also contributes new evidence to the small number of studies that analyze the effect of gender diversity in top management teams on innovation.

Making technological innovation work for sustainable development

OpenAIRE

Anadon, Laura Diaz; Chan, Gabriel; Harley, Alicia G.; Matus, Kira; Moon, Suerie; Murthy, Sharmila L.; Clark, William C.

2016-01-01

Sustainable development requires harnessing technological innovation to improve human well-being in current and future generations. However, poor, marginalized, and unborn populations too often lack the economic or political power to shape innovation processes to meet their needs. Issues arise at all stages of innovation, from invention of a technology through its selection, production, adaptation, adoption, and retirement. Three insights should inform efforts to intervene in innovation syste...

Technology, Innovation and Knowledge

DEFF Research Database (Denmark)

Andersson, Ulf; Dasi, Angels; Mudambi, Ram

2016-01-01

The relevance of ideas is at the core of the IB field and has been captured in concepts like technology, innovation and knowledge. While these concepts have evolved over the last decades, the point that the ideas and the international connectivity are central for IB remains genuine. This paper...... is an attempt to take stock of the evolution of the concepts technology, innovation and knowledge in IB literature along the past five decades with a particular focus on the role of the Columbia Journal of World Business (CJWB) and the Journal of World Business (JWB) in this evolution. Likewise, our objective...

Technology innovation and entrepreneurial state: the development of China's high-speed rail industry

NARCIS (Netherlands)

Sun, Z.

2015-01-01

China proactively promotes indigenous technology innovation towards developing an innovation-based economy. This contradicts the developmental state literature that puts emphasis on technology imitation. Drawn from the strategic entrepreneurship perspective, this article explores the role of the

Review and evaluation of innovative technologies for measuring diet in nutritional epidemiology.

Science.gov (United States)

Illner, A-K; Freisling, H; Boeing, H; Huybrechts, I; Crispim, S P; Slimani, N

2012-08-01

The use of innovative technologies is deemed to improve dietary assessment in various research settings. However, their relative merits in nutritional epidemiological studies, which require accurate quantitative estimates of the usual intake at individual level, still need to be evaluated. To report on the inventory of available innovative technologies for dietary assessment and to critically evaluate their strengths and weaknesses as compared with the conventional methodologies (i.e. Food Frequency Questionnaires, food records, 24-hour dietary recalls) used in epidemiological studies. A list of currently available technologies was identified from English-language journals, using PubMed and Web of Science. The search criteria were principally based on the date of publication (between 1995 and 2011) and pre-defined search keywords. Six main groups of innovative technologies were identified ('Personal Digital Assistant-', 'Mobile-phone-', 'Interactive computer-', 'Web-', 'Camera- and tape-recorder-' and 'Scan- and sensor-based' technologies). Compared with the conventional food records, Personal Digital Assistant and mobile phone devices seem to improve the recording through the possibility for 'real-time' recording at eating events, but their validity to estimate individual dietary intakes was low to moderate. In 24-hour dietary recalls, there is still limited knowledge regarding the accuracy of fully automated approaches; and methodological problems, such as the inaccuracy in self-reported portion sizes might be more critical than in interview-based applications. In contrast, measurement errors in innovative web-based and in conventional paper-based Food Frequency Questionnaires are most likely similar, suggesting that the underlying methodology is unchanged by the technology. Most of the new technologies in dietary assessment were seen to have overlapping methodological features with the conventional methods predominantly used for nutritional epidemiology. Their

DOE's Innovative Treatment Remediation Demonstration Program accelerating the implementation of innovative technologies

International Nuclear Information System (INIS)

Hightower, M.

1995-01-01

A program to help accelerate the adoption and implementation of new and innovative remediation technologies has been initiated by the Department of Energy's (DOE) Environmental Restoration Program Office (EM40). Developed as a Public-Private Partnership program in cooperation with the US Environmental Protection Agency's (EPA) Technology Innovation Office (TIO) and coordinated by Sandia National Laboratories, the Innovative Treatment Remediation Demonstration (ITRD) Program attempts to reduce many of the classic barriers to the use of new technologies by involving government, industry, and regulatory agencies in the assessment, implementation, and validation of innovative technologies. In this program, DOE facilities work cooperatively with EPA, industry, national laboratories, and state and federal regulatory agencies to establish remediation demonstrations using applicable innovative technologies at their sites. Selected innovative technologies are used to remediate small, one to two acre, sites to generate the full-scale and real-world operating, treatment performance, and cost data needed to validate these technologies and gain acceptance by industry and regulatory agencies, thus accelerating their use nationwide. Each ITRD project developed at a DOE site is designed to address a typical soil or groundwater contamination issue facing both DOE and industry. This includes sites with volatile organic compound (VOC), semi-VOC, heavy metal, explosive residue, and complex or multiple constituent contamination. Projects are presently underway at three DOE facilities, while additional projects are under consideration for initiation in FY96 at several additional DOE sites. A brief overview of the ITRD Program, program plans, and the status and progress of existing ITRD projects are reviewed in this paper

Reactor surface contamination stabilization. Innovative technology summary report

International Nuclear Information System (INIS)

1998-11-01

Contaminated surfaces, such as the face of a nuclear reactor, need to be stabilized (fixed) to avoid airborne contamination during decontamination and decommissioning activities, and to prepare for interim safe storage. The traditional (baseline) method of fixing the contamination has been to spray a coating on the surfaces, but ensuring complete coverage over complex shapes, such as nozzles and hoses, is difficult. The Hanford Site C Reactor Technology Demonstration Group demonstrated innovative technologies to assess stabilization properties of various coatings and to achieve complete coverage of complex surfaces on the reactor face. This demonstration was conducted in two phases: the first phase consisted of a series of laboratory assessments of various stabilization coatings on metal coupons. For the second phase, coatings that passed the laboratory tests were applied to the front face of the C Reactor and evaluated. The baseline coating (Rust-Oleum No. 769) and one of the innovative technologies did not completely cover nozzle assemblies on the reactor face, the most critical of the second-phase evaluation criteria. However, one of the innovative coating systems, consisting of a base layer of foam covered by an outer layer of a polymeric film, was successful. The baseline technology would cost approximately 33% as much as the innovative technology cost of $64,000 to stabilize an entire reactor face (196 m 2 or 2116 ft 2 ) with 2,004 nozzle assemblies, but the baseline system failed to provide complete surface coverage

Innovative sport technology through cross-disciplinary research ...

African Journals Online (AJOL)

Innovative sport technology through cross-disciplinary research: Future of sport ... South African Journal for Research in Sport, Physical Education and Recreation ... of the advantages and disadvantages of innovative sport technology brought ...

Innovating Education and Educating for Innovation: The Power of Digital Technologies and Skills

Science.gov (United States)

OECD Publishing, 2016

2016-01-01

OECD's Innovation Strategy calls upon all sectors in the economy and society to innovate in order to foster productivity, growth and well-being. Education systems are critically important for innovation through the development of skills that nurture new ideas and technologies. However, whereas digital technologies are profoundly changing the way…

Holding a candle to innovation in concentrating solar power technologies: A study drawing on patent data

International Nuclear Information System (INIS)

Braun, Frauke G.; Hooper, Elizabeth; Wand, Robert; Zloczysti, Petra

2011-01-01

Improved understanding of the innovative pathways of renewable energy technologies is vital if we are to make the transition to a low carbon economy. This study presents new evidence on innovation and industry dynamics in concentrating solar power (CSP) technologies. Though CSP is undergoing a renaissance, existing innovation studies have explored innovative activity in solar technologies in general, ignoring the major differences between solar photovoltaic and CSP technologies. This study, based on patent data, examines the level and dynamics of innovative activity in CSP between 1978 and 2004. Our unique contribution, based on engineering expertise and detailed datawork, is a classification system mapping CSP technologies to the International Patent Classification (IPC) system. The innovation performance of CSP is found to be surprisingly weak compared to the patent boom in other green technologies. Performance was strong around 1980 before falling dramatically, and has only recently begun to show signs of recovery. Innovation and R and D are concentrated in high-tech countries; the US, Germany and Japan, which do not necessarily have high domestic CSP potential. Large CSP potential is, therefore, not a sufficient condition for innovation. Innovators must possess economic and scientific capabilities. - Research highlights: → We develop a new classification system which allows us to map innovation in CSP technologies to the International Patent Classification System. → Evidence of innovation patterns in concentrating solar power technologies is presented. → Innovation performance in CSP is surprisingly weak compared to patenting in other green technologies, despite its strong potential as a low carbon power generation technology.

Innovative and Alternative Technology Assessment Manual

Energy Technology Data Exchange (ETDEWEB)

None

1980-02-01

This four chapter, six appendix manual presents the procedures and methodology as well as the baseline costs and energy information necessary for the analysis and evaluation of innovative and alternative technology applications submitted for federal grant assistance under the innovative and alternative technology provisions of the Clean Water Act of 1977. The manual clarifies and interprets the intent of Congress and the Environmental Protection Agency in carrying out the mandates of the innovative and alternative provisions of the Clean Water Act of 1977. [DJE 2005

Healthcare technology innovation adoption electronic health records and other emerging health information technology innovations

CERN Document Server

Daim, Tugrul U; Basoglu, Nuri; Kök, Orhun M; Hogaboam, Liliya

2016-01-01

This book aims to study the factors affecting the adoption and diffusion of Health Information Technology (HIT) innovation. It analyzes the adoption processes of various tools and applications, particularly Electronic Health Records (EHR), highlighting the impact on various sectors of the healthcare system, such as physicians, administration,  and patient care, while also identifying the various pitfalls and gaps in the literature. With the various challenges currently facing the United States healthcare system, the study, adoption and diffusion of healthcare technology innovation, particularly HIT, is imperative to achieving national goals. This book is organized into three sections. Section one reviews theories and applications for the diffusion of Health Care Technologies. Section two evaluates EHR technology, including the barriers and enables in adoption and alternative technologies. Finally, section three examines the factors impacting the adoption of EHR systems. This book will be a key source for stu...

Technology-Based Innovations to Foster Personalized Healthy Lifestyles and Well-Being: A Targeted Review

Science.gov (United States)

Santana, Silvina; Tsiknakis, Manolis; Marias, Kostas; Sakkalis, Vangelis; Teixeira, António; Janssen, Joris H; de Jong, Henri; Tziraki, Chariklia

2016-01-01

Background New community-based arrangements and novel technologies can empower individuals to be active participants in their health maintenance, enabling people to control and self-regulate their health and wellness and make better health- and lifestyle-related decisions. Mobile sensing technology and health systems responsive to individual profiles combined with cloud computing can expand innovation for new types of interoperable services that are consumer-oriented and community-based. This could fuel a paradigm shift in the way health care can be, or should be, provided and received, while lessening the burden on exhausted health and social care systems. Objective Our goal is to identify and discuss the main scientific and engineering challenges that need to be successfully addressed in delivering state-of-the-art, ubiquitous eHealth and mHealth services, including citizen-centered wellness management services, and reposition their role and potential within a broader context of diverse sociotechnical drivers, agents, and stakeholders. Methods We review the state-of-the-art relevant to the development and implementation of eHealth and mHealth services in critical domains. We identify and discuss scientific, engineering, and implementation-related challenges that need to be overcome to move research, development, and the market forward. Results Several important advances have been identified in the fields of systems for personalized health monitoring, such as smartphone platforms and intelligent ubiquitous services. Sensors embedded in smartphones and clothes are making the unobtrusive recognition of physical activity, behavior, and lifestyle possible, and thus the deployment of platforms for health assistance and citizen empowerment. Similarly, significant advances are observed in the domain of infrastructure supporting services. Still, many technical problems remain to be solved, combined with no less challenging issues related to security, privacy, trust, and

Technology-Based Innovations to Foster Personalized Healthy Lifestyles and Well-Being: A Targeted Review.

Science.gov (United States)

Spanakis, Emmanouil G; Santana, Silvina; Tsiknakis, Manolis; Marias, Kostas; Sakkalis, Vangelis; Teixeira, António; Janssen, Joris H; de Jong, Henri; Tziraki, Chariklia

2016-06-24

New community-based arrangements and novel technologies can empower individuals to be active participants in their health maintenance, enabling people to control and self-regulate their health and wellness and make better health- and lifestyle-related decisions. Mobile sensing technology and health systems responsive to individual profiles combined with cloud computing can expand innovation for new types of interoperable services that are consumer-oriented and community-based. This could fuel a paradigm shift in the way health care can be, or should be, provided and received, while lessening the burden on exhausted health and social care systems. Our goal is to identify and discuss the main scientific and engineering challenges that need to be successfully addressed in delivering state-of-the-art, ubiquitous eHealth and mHealth services, including citizen-centered wellness management services, and reposition their role and potential within a broader context of diverse sociotechnical drivers, agents, and stakeholders. We review the state-of-the-art relevant to the development and implementation of eHealth and mHealth services in critical domains. We identify and discuss scientific, engineering, and implementation-related challenges that need to be overcome to move research, development, and the market forward. Several important advances have been identified in the fields of systems for personalized health monitoring, such as smartphone platforms and intelligent ubiquitous services. Sensors embedded in smartphones and clothes are making the unobtrusive recognition of physical activity, behavior, and lifestyle possible, and thus the deployment of platforms for health assistance and citizen empowerment. Similarly, significant advances are observed in the domain of infrastructure supporting services. Still, many technical problems remain to be solved, combined with no less challenging issues related to security, privacy, trust, and organizational dynamics. Delivering

European innovation and technology development

International Nuclear Information System (INIS)

Johnson, R.W.

1991-01-01

The promotion of technological innovation by European national governments and the EC in pursuit of both increased recovery and the anchoring of technology in supply, manufacturing and service sector companies has been a feature of the strategic involvement by European states in exploration and production research and development. This paper summaries past trends in this activity and reviews the targets for future industry innovation which will enable European (primarily the North Sea) production to be sustained for a further generation

[Hospital-based health technology assessment in France: how to proceed to evaluate innovative medical devices?].

Science.gov (United States)

Martelli, N; van den Brink, H; Denies, F; Dervaux, B; Germe, A F; Prognon, P; Pineau, J

2014-01-01

Innovative medical devices offer solutions to medical problems and greatly improve patients' outcomes. Like National Health Technology Assessment (HTA) agencies, hospitals face numerous requests for innovative and costly medical devices. To help local decision-makers, different approaches of hospital-based HTA (HB-HTA) have been adopted worldwide. The objective of the present paper is to explore HB-HTA models for adopting innovative medical devices in France and elsewhere. Four different models have been conceptualized: "ambassador" model, "mini-HTA" model, "HTA unit" model and "internal committee". Apparently, "HTA unit" and "internal committee" (or a mixture of both models) are the prevailing HB-HTA models in France. Nevertheless, some weaknesses of these models have been pointed out in previous works. Only few examples involving hospital pharmacists have been found abroad, except in France and in Italy. Finally, the harmonization of the assessment of innovative medical devices in France needs a better understanding of HB-HTA practices. Copyright © 2013 Elsevier Masson SAS. All rights reserved.

Effects of RFID Technology on the Logistics Innovation

OpenAIRE

金, 双鴿; Shuangge, JIN

2010-01-01

An advanced automatic identification technology based on the Radio Frequency Identification (RFID) technology has significant value for inventory systems. RFID tag is a microchip combined with an antenna in a compact package and is called also IC tag. Other benefits of using RFID include the reduction of labor costs, the simplification of business processes, and the reduction of inventory inaccuracies. This paper aims to analyse the effects of RFID technology on the logistics innovation.

Synergy between scientific advancement and technological innovation, illustrated by a mechanism-based model characterizing sodium-glucose cotransporter-2 inhibition.

Science.gov (United States)

Zhang, Liping; Ng, Chee M; List, James F; Pfister, Marc

2010-09-01

Advances in experimental medicine and technological innovation during the past century have brought tremendous progress in modern medicine and generated an ever-increasing amount of data from bench and bedside. The desire to extend scientific knowledge motivates effective data integration. Technological innovation makes this possible, which in turn accelerates the advancement in science. This mutually beneficial interaction is illustrated by the development of an expanded mechanism-based model for understanding a novel mechanism, sodium-glucose cotransporter-2 SGLT2 inhibition for potential treatment of type 2 diabetes mellitus.

Policies for the Energy Technology Innovation System (ETIS)

NARCIS (Netherlands)

Grubler, A.; Aguayo, F.; Gallagher, K.; Hekkert, M.P.; Jiang, K.; Mytelka, L.; Neij, L.; Nemet, G.; Wilson, C.

2012-01-01

Innovation and technological change are integral to the energy system transformations described in the Global Energy Assessment (GEA) pathways. Energy technology innovations range from incremental improvements to radical breakthroughs and from technologies and infrastructure to social institutions

Emerging Technological Risk Underpinning the Risk of Technology Innovation

CERN Document Server

Anderson, Stuart

2012-01-01

Classes of socio-technical hazards allow a characterization of the risk in technology innovation and clarify the mechanisms underpinning emergent technological risk. Emerging Technological Risk provides an interdisciplinary account of risk in socio-technical systems including hazards which highlight: ·         How technological risk crosses organizational boundaries, ·         How technological trajectories and evolution develop from resolving tensions emerging between social aspects of organisations and technologies and ·         How social behaviour shapes, and is shaped by, technology. Addressing an audience from a range of academic and professional backgrounds, Emerging Technological Risk is a key source for those who wish to benefit from a detail and methodical exposure to multiple perspectives on technological risk. By providing a synthesis of recent work on risk that captures the complex mechanisms that characterize the emergence of risk in technology innovation, Emerging Tec...

Understanding energy technology developments from an innovation system perspective

Energy Technology Data Exchange (ETDEWEB)

Borup, M.; Nygaard Madsen, A. [Risoe National Lab., DTU, Systems Analysis Dept., Roskilde (Denmark); Gregersen, Birgitte [Aalborg Univ., Department of Business Studies (Denmark)

2007-05-15

With the increased market-orientation and privatisation of the energy area, the perspective of innovation is becoming more and more relevant for understanding the dynamics of change and technology development in the area. A better understanding of the systemic and complex processes of innovation is needed. This paper presents an innovation systems analysis of new and emerging energy technologies in Denmark. The study focuses on five technology areas: bio fuels, hydrogen technology, wind energy, solar cells and energy-efficient end-use technologies. The main result of the analysis is that the technology areas are quite diverse in a number of innovation-relevant issues like actor set-up, institutional structure, maturity, and connections between market and non-market aspects. The paper constitutes background for discussing the framework conditions for transition to sustainable energy technologies and strengths and weaknesses of the innovation systems. (au)

Information and Innovation Management within Information Technology Enterprises

OpenAIRE

Geoff D. Skinner

2010-01-01

Australia, while being a large and eager consumer of innovative and cutting edge Information and Communication Technologies (ICT), continues to struggle to remain a leader in Technological Innovation. This paper has two main contributions to address certain aspects of this complex issue. The first being the current findings of an ongoing research project on Information and Innovation Management in the Australian Information and Communication Technologies (ICT) sector. The...

Innovation in nuclear energy technology

International Nuclear Information System (INIS)

Dujardin, Th.; Bertel, E.; Kwang Seok, Lee; Foskolos, K.

2007-01-01

Innovation has been a driving force for the success of nuclear energy and remains essential for its sustainable future. Many research and development programmes focus on enhancing the performance of power plants in operation, current fuel design and characteristics, and fuel cycle processes used in existing facilities. Generally performed under the leadership of the industry. Some innovation programmes focus on evolutionary reactors and fuel cycles, derived from systems of the current generation. Such programmes aim at achieving significant improvements, in the field of economics or resource management for example, in the medium term. Often, they are undertaken by the industry with some governmental support as they require basic research together with technological development and adaptation. Finally, large programmes, often undertaken in an international, intergovernmental framework are devoted to design and development of a new generation of systems meeting the goals of sustainable development in the long term. Driving forces for nuclear innovation vary depending on the target technology, the national framework and the international context surrounding the research programme. However, all driving factors can be grouped in three categories: market drivers, political drivers and technology drivers. Globally, innovation in the nuclear energy sector is a success story but is a lengthy process that requires careful planning and adequate funding to produce successful outcomes

Innovating beyond Technology : Studies on how management innovation, co-creation and business model innovation contribute to firms' (innovation) performance

NARCIS (Netherlands)

C.V. Heij (Kevin)

2015-01-01

textabstractInnovation is generally considered to be a cornerstone of organizational survival in many of today’s dynamic and competitive markets. This dissertation goes beyond the dominant focus on technological innovation in innovation studies by examining how and under which conditions several

The impact of innovative commercial technologies on students’ behaviour of an economic university

Directory of Open Access Journals (Sweden)

Laurentiu-Dan Anghel

2015-05-01

Full Text Available In a dynamic business environment, implementing innovative commercial technologies facilitates the winning of new competitive advantages in the retail industry, given the manifested influence on consumer buying behaviour towards commercial units, as well as the significant contribution to the development of modern shops image. This paper presents the attitude of students from the Bucharest University of Economic Studies towards the adoption of innovative retail technologies within hypermarkets in Romania, based on a selective marketing research, conducted on a sample of 359 students from undergraduate and master cycles. The main objectives focused on identifying: the image of certain instruments belonging to the innovative commercial technologies in terms of usefulness in the process of buying; the intention to use innovative commercial technologies; the perception of the main advantages and disadvantages of using innovative commercial technologies in the buying process; the importance of commercial technologies in relation to other attributes underlying the development of a hypermarket image. Research results show a relatively low level of awareness among buyers, due to a reduced exposure to innovative commercial technologies, but a relatively high availability of acceptance in the purchasing process. Thus, there is a favourable assessment of the utility of commercial instruments in the buying process and a relatively high intention of use. The paper also highlights the influence of innovative commercial technologies on store image and loyalty of buyers.

Problems forming innovative-technological image of russian regions

Directory of Open Access Journals (Sweden)

Irina Markovna Golova

2012-06-01

Full Text Available In this paper, actual problems of innovative-technological image as a key element of the mechanism of the healing sources of socioeconomic development of the Russian regionsare considered. The author gives an assessment of the level of differentiation of subjects of the Russian Federation on the potential for innovative development. Trends in spatial transformations of thescientific and technical and innovation capacities of the country are analyzedand reasons of low innovational activity of Russian enterprises are disclosed. Basic conditions for the success of actions to create an attractive image of innovative-technological territory are formulated. Special attention is paid to the position of regions as participants in the innovational processes, creating preconditions for creativity, harmonization of spatial priorities of innovation, technological and socio-economic development, support for the development of new high-tech industries, improvement of inter-budgetary relations. There are proved priority areas of state policy to reduce barriers to the realization of an innovative paradigm for development of Russian society and effective inclusion of local communities in the implementation of innovative changes.

Teaching biomedical technology innovation as a discipline.

Science.gov (United States)

Yock, Paul G; Brinton, Todd J; Zenios, Stefanos A

2011-07-20

Recently, universities in the United States and abroad have developed dedicated educational programs in life science technology innovation. Here, we discuss the two major streams of educational theory and practice that have informed these programs: design thinking and entrepreneurship education. We make the case that the process of innovation for new medical technologies (medtech) is different from that for biopharmaceuticals and outline the challenges and opportunities associated with developing a discipline of medtech innovation.

Environmental regulation and technological innovation

Energy Technology Data Exchange (ETDEWEB)

Farrell, A.E. [Carnegie Mellon Electricity Industry Center, Pittsburg, PA (United States)

2002-07-01

Government policies are a major factor in the determination of structural conditions of competition. The innovative activity comprises the following: invention, adoption, and diffusion. Invention involves research and development activities such as patenting, research and development budgets. The adoption phase is concerned with deployment. As for the diffusion phase, it involves commercialization, and scale-economies. The process of introducing new technologies that are adopted by small numbers of customers in a niche market was explained. Once costs are lowered through experience gained in designing, manufacturing and servicing the new technology, mew applications generally lead to larger markets. Environmental technologies have no early adopters, implying that governments have an important role to play. However, commercial processes are not normally as well known to government as it is to the private sector. The electoral cycle also interferes with long term research and development efforts for technological clusters. A look at sulphur dioxide control at United States power plants illustrated the problem. The author then explained the reasons behind low allowance prices. Low-sulphur western coal was rendered economic in large areas of the United States by rail deregulation. Electricity restructuring was also a factor. The author indicated that binding government regulation must come before adoption and diffusion of emission controls. A summary of recent research was provided, in which the author stated that no single policy instrument was likely to properly stimulate innovative activity. In those cases where both supply and demand are stimulated by government, the technological innovation is greatest. Stringent regulations induce innovation, as do greater flexibility and greater regulatory certainty. Knowledge transfer within the industry is vital. 8 refs., 3 figs.

Seeds of Innovation: Three Years of the Technology Innovation Challenge Grant Program.

Science.gov (United States)

Harris, Larry A.

This publication describes the 62 projects that received 5-year Technology Innovation Challenge Grants beginning in 1995, 1996, and 1997, with reviews of the projects occurring in late 1999 and early 2000. Part 1 of the report describes the Technology Innovation Challenge Grant (TICG) program and its importance. Part 2 contains the project…

Research on the Mode of Technology Innovation Alliance of the New Material Industry in Hunan Province

Science.gov (United States)

Wang, Fan

2018-03-01

One of the main directions of technology development in the 21st century is the development and application of new materials, and the key to the development of the new material industry lies in the industrial technology innovation. The gross scale of the new material industry in Hunan Province ranks the first array in China. Based on the present situation of Hunan’s new material industry, three modes of technology innovation alliance are put forward in this paper, namely the government-driven mode, the research-driven and the market-oriented mode. The government-driven mode is applicable to the major technology innovation fields with uncertain market prospect, high risk of innovation and government’s direct or indirect intervention;the research-driven mode is applicable to the key technology innovation fields with a high technology content; and the market-oriented mode is applicable to the general innovation fields in which enterprises have demands for technology innovation but such innovation must be achieved via cooperative research and development.

A hybrid MCDM framework combined with DEMATEL-based ANP to evaluate enterprise technological innovation capabilities assessment

Directory of Open Access Journals (Sweden)

Meng-Jong Kuan

2014-08-01

Full Text Available The efficient evaluation of technological innovation capabilities of enterprises is an important factor to enhance competitiveness. This paper aims to assess and to rank technological innovation evaluation criteria in order to provide a practical insight of systematic analysis by gathering the qualified experts’ opinions combined with three methods of multi-criteria decision making approach. A framework is proposed and uses a novel hybrid multiple criteria decision-making (MCDM model to address the dependence relationships of criteria with the aid of the Decision-Making Trial and Evaluation Laboratory (DEMATEL, analytical network process (ANP and VIKOR (VlseKriterijumska Optimizacija I Kompromisno Resenje. The study reports that the interaction between criteria is essential and influences technological innovation capabilities; furthermore, this ranking development of technological innovation capabilities assessment is also one of key management tools for managements of other related high- tech enterprises. Managers can then judge the need to improve and determine which criteria provide the most effective direction towards improvement.

The Kyoto Mechanisms and Technological Innovation

DEFF Research Database (Denmark)

Lund, Henrik

2003-01-01

Climate change response, including implementation of the Kyoto targets as the first step, calls for technological innovation of future sustainable energy systems. One of the important agreements in several declarations, including the Kyoto protocol, has been to promote and coordinate...... the collaboration between the countries in the necessary technological development. The paper encourage that the Kyoto mechanisms will be used for acceleration of the necessary technical innovation in Denmark....

Technology innovation and management in the US Bureau of the Census: Discussion and recommendations

Energy Technology Data Exchange (ETDEWEB)

Tonn, B.; Edwards, R.; Goeltz, R.; Hake, K.

1990-09-01

This report contains a set of recommendations prepared by Oak Ridge National Laboratory (ORNL) for the US Bureau of the Census pertaining to technology innovation and management. Technology has the potential to benefit the Bureau's data collection, capture, processing, and analysis activities. The entire Bureau was represented from Decennial Census to Economic Programs and various levels of Bureau management and numerous experts in technology. Throughout the Bureau, workstations, minicomputers, and microcomputers have found their place along side the Bureau's mainframes. The Bureau's new computer file structure called the Topologically Integrated Geographic Encoding and Referencing data base (TIGER) represents a major innovation in geographic information systems and impressive progress has been made with Computer Assisted Telephone Interviewing (CATI). Other innovations, such as SPRING, which aims to provide Bureau demographic analysts with the capability of interactive data analysis on minicomputers, are in the initial stages of development. Recommendations fall into five independent, but mutually beneficial categories. (1) The ADP Steering Committee be disbanded and replaced with The Technology Forum. (2) Establishment of a Technology Review Committee (TRC), to be composed of technology experts from outside the Bureau. (3) Designate technological gurus. These individuals will be the Bureau's experts in new and innovative technologies. (4) Adopt a technology innovation process. (5) Establish an Advanced Technology Studies Staff (ATSS) to promote technology transfer, obtain funding for technological innovation, manage innovation projects unable to find a home in other divisions, evaluate innovations that cut across Bureau organizational boundaries, and provide input into Bureau technology analyses. (JF)

The development strategy of financial and innovative technologies

OpenAIRE

R.V. Lavrov

2013-01-01

The aim of the article. The aim of the article is to define and to estimate the forming of expediency of the development strategy of financial and innovative technologies in the context of modern economic space realities.The results of the analysis. The growing importance of the financial sector in the contemporary economic space, as well as rapid changes in it, generates a need for financial innovative technologies. Development strategy of financial and innovative technologies is always asso...

Innovative manufacturing technologies for low-cost, high efficiency PERC-based PV modules

Energy Technology Data Exchange (ETDEWEB)

Yelundur, Vijay [Suniva Inc., Norcross, GA (United States)

2017-04-19

The goal this project was to accelerate the deployment of innovative solar cell and module technologies that reduce the cost of PERC-based modules to best-in-class. New module integration technology was to be used to reduce the cost and reliance on conventional silver bus bar pastes and enhance cell efficiency. On the cell manufacturing front, the cost of PERC solar cells was to be reduced by introducing advanced metallization approaches to increase cell efficiency. These advancements will be combined with process optimization to target cell efficiencies in the range of 21 to 21.5%. This project will also explore the viability of a bifacial PERC solar cell design to enable cost savings through the use of thin silicon wafers. This project was terminated on 4/30/17 after four months of activity due financial challenges facing the recipient.

Core-firm Based View on the Mechanism of Constructing a Corporate Innovation Ecosystem

DEFF Research Database (Denmark)

Jiang, Shimei; Wang, Ziyuan; Hu, Yimei

2016-01-01

The fierce transformation of the competitive status of business world in the 21st century has urged the innovation activities turned from mechanistic and deterministic to ecological and organic. The study firstly defines the concept of core firm based on reviewing existing corporate innovation...... constructing a corporate innovation ecosystem through building up an innovation platform that include multi-level collaborative relationships based on different technologies; while at the same time integrating non-technological issues such as strategy, culture, management, organization, institution and market....... This research complements and extends literature on corporate innovation ecosystem, and provides implications to innovative companies on constructing a core firm based innovation ecosystem....

Kazakhstan innovation projects in nuclear technologies field

International Nuclear Information System (INIS)

Shkol'nik, V.S.; Tukhvatulin, Sh.T.

2005-01-01

At present in the Republic of Kazakhstan in preparation and realization stage there are several innovation projects related with use of advanced nuclear technologies. Projects are as follows: 'Implementation of Kazakhstan thermonuclear reactor tokamak (KTM)'; 'Implementation at the L.N. Gumilev Eurasian National University the inter-disciplinary research complex on the heavy ions accelerator base'; 'Development of the Technological Park 'Nuclear Technologies Center in Kurchatov city'; 'Development the first in the Central-Asian region Center of Nuclear Medicine and Biophysics'. The initiator and principal operator of these projects is the National Nuclear Center of the Republic of Kazakhstan

Drug delivery system innovation and Health Technology Assessment: Upgrading from Clinical to Technological Assessment.

Science.gov (United States)

Panzitta, Michele; Bruno, Giorgio; Giovagnoli, Stefano; Mendicino, Francesca R; Ricci, Maurizio

2015-11-30

Health Technology Assessment (HTA) is a multidisciplinary health political instrument that evaluates the consequences, mainly clinical and economical, of a health care technology; the HTA aim is to produce and spread information on scientific and technological innovation for health political decision making process. Drug delivery systems (DDS), such as nanocarriers, are technologically complex but they have pivotal relevance in therapeutic innovation. The HTA process, as commonly applied to conventional drug evaluation, should upgrade to a full pharmaceutical assessment, considering the DDS complexity. This is useful to study more in depth the clinical outcome and to broaden its critical assessment toward pharmaceutical issues affecting the patient and not measured by the current clinical evidence approach. We draw out the expertise necessary to perform the pharmaceutical assessment and we propose a format to evaluate the DDS technological topics such as formulation and mechanism of action, physicochemical characteristics, manufacturing process. We integrated the above-mentioned three points in the Evidence Based Medicine approach, which is data source for any HTA process. In this regard, the introduction of a Pharmaceutics Expert figure in the HTA could be fundamental to grant a more detailed evaluation of medicine product characteristics and performances and to help optimizing DDS features to overcome R&D drawbacks. Some aspects of product development, such as manufacturing processes, should be part of the HTA as innovative manufacturing processes allow new products to reach more effectively patient bedside. HTA so upgraded may encourage resource allocating payers to invest in innovative technologies and providers to focus on innovative material properties and manufacturing processes, thus contributing to bring more medicines in therapy in a sustainable manner. Copyright © 2015 Elsevier B.V. All rights reserved.

A Conceptual Framework for the Alignment of Innovation and Technology

Directory of Open Access Journals (Sweden)

René Pellissier

2008-08-01

Full Text Available Historically, business institutions base their growth strategies on their research and development (R&D function. This function is fairly established and sets out to acquire new knowledge in a systematic process of research in order to produce or improve products, services or processes. In fact, innovation and research are two of the main thrusts for economic growth. Research is planned, assessed, managed and rewarded, innovation is not. However, without acknowledging and aiding the growing importance of innovation for growth in a rapidly more chaotic environment, this function is set for failure. Where research is valued, innovation is feared as radical and disruptive. Furthermore, there is little evidence in the current body literature to link them and to show how they, jointly, can add more value than separately. They remain independent entities in separate clusters of the economy. The convergence factor in research and innovation is technology (knowledge not machines. The paper explores the convergence of innovation and research from a previous paper, focusing on the development of a conceptual model in terms of the technology (or knowledge system required for the accomplishment of this convergence. In this sense, technology is defined as knowledge, tacit or explicit, in human, document or electronic format. The proposed convergence requires the use of knowledge systems to drive the innovation and research. The contribution of the paper lies in the knowledge developmental aspects of research and innovation convergence. An existing model to achieve for knowledge systems development will be reviewed and a modified version presented after careful consideration of the body literature on knowledge and innovation systems. This model incorporates aspects of knowledge management as well as innovation and research management.

Innovative technologies in primary school

Directory of Open Access Journals (Sweden)

Lyzentsova L.A.

2017-01-01

Full Text Available this article describes innovative technologies during the classes in elementary school. The author has noted that the introduction of new technology promotes the development of education and the student's desire to learn and fosters independence, initiative and tolerance.

THE APPLICATION OF FORESIGHT PROJECTS IN FORMATION OF TECHNOLOGICAL COMPANIES’ INNOVATION DEVELOPMENT STRATEGY

Directory of Open Access Journals (Sweden)

M. E. Zolotareva

2016-01-01

, communication, consent, concentration on the long-term period, coordination and systematic organization of the foresight project allows to expand the search scope and objectives of technological companies’ innovation development. The methodology of the foresight research facilitates the transition from an adaptive approach to changes in the environment for a constructive approach of forming the desired image of the future defining the directions of technological companies’ innovative development and the national innovation system development. During the successive stages of the foresight project based on the scanning of horizons and weak signals of changes identification in the external environment is setting strategic goals of technological companies’ innovation development, the selection of priority innovation projects to achieve strategic goals of innovation development.

Patterns of Innovation in Alzheimer's Disease Drug Development: A Strategic Assessment Based on Technological Maturity.

Science.gov (United States)

Beierlein, Jennifer M; McNamee, Laura M; Walsh, Michael J; Ledley, Fred D

2015-08-01

This article examines the current status of translational science for Alzheimer's disease (AD) drug discovery by using an analytical model of technology maturation. Previous studies using this model have demonstrated that nascent scientific insights and inventions generate few successful leads or new products until achieving a requisite level of maturity. This article assessed whether recent failures and successes in AD research follow patterns of innovation observed in other sectors. The bibliometric-based Technology Innovation Maturation Evaluation model was used to quantify the characteristic S-curve of growth for AD-related technologies, including acetylcholinesterase, N-methyl-d-aspartate (NMDA) receptors, B-amyloid, amyloid precursor protein, presenilin, amyloid precursor protein secretases, apolipoprotein E4, and transactive response DNA binding protein 43 kDa (TDP-43). This model quantifies the accumulation of knowledge as a metric for technological maturity, and it identifies the point of initiation of an exponential growth stage and the point at which growth slows as the technology is established. In contrast to the long-established acetylcholinesterase and NMDA receptor technologies, we found that amyloid-related technologies reached the established point only after 2000, and that the more recent technologies (eg, TDP-43) have not yet approached this point. The first approvals for new molecular entities targeting acetylcholinesterase and the NMDA receptor occurred an average of 22 years after the respective technologies were established, with only memantine (which was phenotypically discovered) entering clinical trials before this point. In contrast, the 6 lead compounds targeting the formation of amyloid plaques that failed in Phase III trials between 2009 and 2014 all entered clinical trials before the respective target technologies were established. This analysis suggests that AD drug discovery has followed a predictable pattern of innovation in which

Technological Innovation Capabilities and Firm Performance

OpenAIRE

Richard C.M. Yam; William Lo; Esther P.Y. Tang; Antonio; K.W. Lau

2010-01-01

Technological innovation capability (TIC) is defined as a comprehensive set of characteristics of a firm that facilities and supports its technological innovation strategies. An audit to evaluate the TICs of a firm may trigger improvement in its future practices. Such an audit can be used by the firm for self assessment or third-party independent assessment to identify problems of its capability status. This paper attempts to develop such an auditing framework that can...

Information Technology-Based Innovation in International Marketing Education: An Exploration of Two Learning Environments

Science.gov (United States)

Sinkovics, Rudolf R.; Haghirian, Parissa; Yu, Shasha

2009-01-01

Information technology (IT) innovations have and continue to have a significant impact on international marketing practice and customer interactions. With the marketing environment becoming increasingly dependent on technology, marketing teaching in higher education faces a challenging task of effectively leveraging technology in diverse learning…

Technology and Innovation Management in Higher Education

DEFF Research Database (Denmark)

Morales, Antonio Adrián Arciénaga; Nielsen, Janni; Bacarini, Hernán Alberto

2018-01-01

different ways to obtain a panoply of competencies to identify technology and innovation management issues at individual business and regional level, particularly for small-and-medium-sized enterprises (SMEs). The model addresses innovation challenges related to new innovative relationships and product...

[Innovative technology and blood safety].

Science.gov (United States)

Begue, S; Morel, P; Djoudi, R

2016-11-01

If technological innovations are not enough alone to improve blood safety, their contributions for several decades in blood transfusion are major. The improvement of blood donation (new apheresis devices, RFID) or blood components (additive solutions, pathogen reduction technology, automated processing of platelets concentrates) or manufacturing process of these products (by automated processing of whole blood), all these steps where technological innovations were implemented, lead us to better traceability, more efficient processes, quality improvement of blood products and therefore increased blood safety for blood donors and patients. If we are on the threshold of a great change with the progress of pathogen reduction technology (for whole blood and red blood cells), we hope to see production of ex vivo red blood cells or platelets who are real and who open new conceptual paths on blood safety. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

CONSTRUCTION TECHNOLOGY DIFFUSION IN DEVELOPING COUNTRIES: LIMITATIONS OF PREVAILING INNOVATION SYSTEMS

Directory of Open Access Journals (Sweden)

Emilia van Egmond-deWilde de Ligny

2008-12-01

Full Text Available The diffusion of innovative technologies in the market is usually a complex and difficult process with a varying degree of success and the effects of the diffused innovative technologies are very un-balanced. The objective of our research is to gain insight into the reasons why the diffusion of innovative technology fails, even though they promise a superior performance compared to incumbent technologies. Drawing on innovation systems theories, we have identified and used the concepts of technological regime, actor network and technology sets to analyze technology diffusion in a case study in the dwelling construction industry in Costa Rica. The results showed bottlenecks in the prevailing innovation system that curtailed the diffusion of an innovative construction technology.

Innovative technologies for groundwater cleanup

International Nuclear Information System (INIS)

Yow, J.L. Jr.

1992-09-01

These notes provide a broad overview of current developments in innovative technologies for groundwater cleanup. In this context, groundwater cleanup technologies include site remediation methods that deal with contaminants in ground water or that may move from the vadose zone into ground water. This discussion attempts to emphasize approaches that may be able to achieve significant improvements in groundwater cleanup cost or effectiveness. However, since data for quantitative performance and cost comparisons of new cleanup methods are scarce, preliminary comparisons must be based on the scientific approach used by each method and on the site-specific technical challenges presented by each groundwater contamination situation. A large number of technical alternatives that are now in research, development, and testing can be categorized by the scientific phenomena that they employ and by the site contamination situations that they treat. After reviewing a representative selection of these technologies, one of the new technologies, the Microbial Filter method, is discussed in more detail to highlight a promising in situ groundwater cleanup technology that is now being readied for field testing

Innovative technologies for soil cleanup

International Nuclear Information System (INIS)

Yow, J.L. Jr.

1992-09-01

These notes provide a broad overview of current developments in innovative technologies for soil cleanup. In this context, soil cleanup technologies include site remediation methods that deal primarily with the vadose zone and with relatively shallow, near-surface contamination of soil or rock materials. This discussion attempts to emphasize approaches that may be able to achieve significant improvements in soil cleanup cost or effectiveness. However, since data for quantitative performance and cost comparisons of new cleanup methods are scarce, preliminary comparisons must be based on the scientific approach used by each method and on the sits-specific technical challenges presented by each sold contamination situation. A large number of technical alternatives that are now in research, development, and testing can be categorized by the scientific phenomena that they employ and by the site contamination situations that they treat. After cataloging a representative selection of these technologies, one of the new technologies, Dynamic Underground Stripping, is discussed in more detail to highlight a promising soil cleanup technology that is now being field tested

Policy and innovation: Nanoenergy technology in the USA and China

International Nuclear Information System (INIS)

Liu, Na; Guan, JianCheng

2016-01-01

The USA is a leading country while China is an up-and-coming one in nanotechnology. We carried out a cross-country comparative study on policy and innovation of the two countries in subset nanoenergy field. They both created favorable policy environments for nanotechnology involving applications of nanotechnology in the energy sector. However, Chinese policy deployments for nanotechnology lack coordinated arrangements and effective assessment mechanisms. China performs better than the USA in technological quantity, but weaker in technological influence. The USA expresses an industry-oriented model in nanoenergy technological research and development, but China exhibits a university-and-institute-oriented model. Interorganizational collaboration relationships in the two countries are both still very rare and have huge development space. They both have a long way to go in converting their technological achievements into commercial products, especially China. Finally, we provide the policy implications of this study. In particular, the Chinese government should strengthen its efforts in policies by changing the national S&T evaluation system to set up the basic idea that quality is better than quantity in order to raise the original innovation motivations of innovators. - Highlights: •We compare development status of nanoenergy technologies between China and the USA. •We mainly focus on their policies, innovation performance and pattern in nanoenergy. •Differences are observed in nanoenergy technologies developed in these two countries. •We propose their endeavor directions in nanoenergy based on this study.

Technology and Innovation Management Indicators and Assessment Based on Government Performance

Directory of Open Access Journals (Sweden)

Sanja Marinković

2016-05-01

Full Text Available Throughout large global databases, such as OECD, UNDP, ITU, Eurostat, World Bank, and Statistical offices of countries, there are many indicators that refer to Technology and Innovation Management (TIM performance of countries. However, a question arises of how to classify and systematically analyze these indicators in terms of measuring, monitoring and enhancing TIM performance at a national level. More specifically, in this paper we pose a question of how to assess the government performance in TIM, as one aspect of the Triple Helix model. Therefore, we use a model of thirty-nine indicators which are classified according to three main management functions: planning, organizing and control, observed as input, process and output, respectively. More importantly, we analyze the relations that exist between these three categories of indicators. Planning indicators are observed as the investments in technological and innovative activities; organizing indicators include the infrastructure, public administration efficiency and cooperation support, while control indicators refer to the national economy R&D, transfer effects and entrepreneurship outcomes. The model is tested for assessing and comparing government performance in TIM for three countries: Serbia, Croatia and Slovenia, for the time period 2007-2012. Finally, as a feedback in the model, we used scores of the countries according to the Global Innovation Index and the Global Competitiveness Index, to verify the results and provide the final conclusion.

A boom in energy technology innovation despite decades of stagnant investment

Energy Technology Data Exchange (ETDEWEB)

Bettencourt, Luis M [Los Alamos National Laboratory; Trancik, Jessika A [SANTA FE INSTITUTE; Kaur, Jasleen [INDIANA UNIV

2009-01-01

Rates of patenting in energy technologies in the United States stagnated during a period of low federal investment in the sector from the mid-1980's through 2000. To analyze the current state of the field, we built a new comprehensive database of energy patents in the USA and worldwide aggregated by nation and technology. We show that innovation in energy technologies, as measured by numbers of new patents, has grown dramatically over the last decade both for renewable and fossil fuel-based technologies, but that traditional investment -government and private support for research and development (R&D) -has not risen commensurately. We also show that while venture capital investment in the sector has increased significantly in the last few years it lags the observed uptick in patenting. We find increasing patenting rates in nations worldwide but also differences in regional priorities, as well as a marked divergence in innovation rates across technologies. Renewable energy technologies - especially solar and wind - currently show the fastest rates of innovation, while patenting levels in nuclear fission have remained low despite relatively high levels of sustained investment. While this sharp increase of innovative activity bodes well for change in the energy sector, the future of emerging technologies may hinge on sustained investment in R&D and favorable incentives for market entry.

Solar Preheated Ventilation - Innovative Solar Technology

National Research Council Canada - National Science Library

Gaberson, Howard

1999-01-01

.... This innovative technology applies to both new construction or rehabilitation projects. This TDS introduces this low maintenance solar technology for consideration in all future industrial ventilation or HVAC projects...

Technology for Innovation in Radiation Oncology

Energy Technology Data Exchange (ETDEWEB)

Chetty, Indrin J. [Department of Radiation Oncology, Henry Ford Hospital, Detroit, Michigan (United States); Martel, Mary K., E-mail: mmartel@mdanderson.org [Department of Radiation Physics, University of Texas MD Anderson Cancer Center, Houston, Texas (United States); Jaffray, David A. [Departments of Radiation Oncology and Medical Biophysics, Princess Margaret Hospital, Toronto, Ontario (Canada); Benedict, Stanley H. [Department of Radiation Oncology, University of California – Davis Cancer Center, Sacramento, California (United States); Hahn, Stephen M. [Department of Radiation Oncology, University of Texas MD Anderson Cancer Center, Houston, Texas (United States); Berbeco, Ross [Department of Radiation Oncology, Brigham and Women' s Hospital, Boston, Massachusetts (United States); Deye, James [Radiation Research Programs, National Cancer Institute, Bethesda, Maryland (United States); Jeraj, Robert [Department of Medical Physics, University of Wisconsin, Madison, Wisconsin (United States); Kavanagh, Brian [Department of Radiation Oncology, University of Colorado, Aurora, Colorado (United States); Krishnan, Sunil [Department of Radiation Oncology, University of Texas MD Anderson Cancer Center, Houston, Texas (United States); Lee, Nancy [Department of Radiation Oncology, Memorial Sloan Kettering Cancer Center, New York, New York (United States); Low, Daniel A. [Department of Radiation Oncology, University of California – Los Angeles, Los Angeles, California (United States); Mankoff, David [Department of Radiology, University of Washington Medical School, Seattle, Washington (United States); Marks, Lawrence B. [Department of Radiation Oncology, University of North Carolina Hospitals, Chapel Hill, North Carolina (United States); Ollendorf, Daniel [Institute for Clinical and Economic Review, Boston, Massachusetts (United States); and others

2015-11-01

Radiation therapy is an effective, personalized cancer treatment that has benefited from technological advances associated with the growing ability to identify and target tumors with accuracy and precision. Given that these advances have played a central role in the success of radiation therapy as a major component of comprehensive cancer care, the American Society for Radiation Oncology (ASTRO), the American Association of Physicists in Medicine (AAPM), and the National Cancer Institute (NCI) sponsored a workshop entitled “Technology for Innovation in Radiation Oncology,” which took place at the National Institutes of Health (NIH) in Bethesda, Maryland, on June 13 and 14, 2013. The purpose of this workshop was to discuss emerging technology for the field and to recognize areas for greater research investment. Expert clinicians and scientists discussed innovative technology in radiation oncology, in particular as to how these technologies are being developed and translated to clinical practice in the face of current and future challenges and opportunities. Technologies encompassed topics in functional imaging, treatment devices, nanotechnology, and information technology. The technical, quality, and safety performance of these technologies were also considered. A major theme of the workshop was the growing importance of innovation in the domain of process automation and oncology informatics. The technologically advanced nature of radiation therapy treatments predisposes radiation oncology research teams to take on informatics research initiatives. In addition, the discussion on technology development was balanced with a parallel conversation regarding the need for evidence of efficacy and effectiveness. The linkage between the need for evidence and the efforts in informatics research was clearly identified as synergistic.

Technology for Innovation in Radiation Oncology

International Nuclear Information System (INIS)

Chetty, Indrin J.; Martel, Mary K.; Jaffray, David A.; Benedict, Stanley H.; Hahn, Stephen M.; Berbeco, Ross; Deye, James; Jeraj, Robert; Kavanagh, Brian; Krishnan, Sunil; Lee, Nancy; Low, Daniel A.; Mankoff, David; Marks, Lawrence B.; Ollendorf, Daniel

2015-01-01

Radiation therapy is an effective, personalized cancer treatment that has benefited from technological advances associated with the growing ability to identify and target tumors with accuracy and precision. Given that these advances have played a central role in the success of radiation therapy as a major component of comprehensive cancer care, the American Society for Radiation Oncology (ASTRO), the American Association of Physicists in Medicine (AAPM), and the National Cancer Institute (NCI) sponsored a workshop entitled “Technology for Innovation in Radiation Oncology,” which took place at the National Institutes of Health (NIH) in Bethesda, Maryland, on June 13 and 14, 2013. The purpose of this workshop was to discuss emerging technology for the field and to recognize areas for greater research investment. Expert clinicians and scientists discussed innovative technology in radiation oncology, in particular as to how these technologies are being developed and translated to clinical practice in the face of current and future challenges and opportunities. Technologies encompassed topics in functional imaging, treatment devices, nanotechnology, and information technology. The technical, quality, and safety performance of these technologies were also considered. A major theme of the workshop was the growing importance of innovation in the domain of process automation and oncology informatics. The technologically advanced nature of radiation therapy treatments predisposes radiation oncology research teams to take on informatics research initiatives. In addition, the discussion on technology development was balanced with a parallel conversation regarding the need for evidence of efficacy and effectiveness. The linkage between the need for evidence and the efforts in informatics research was clearly identified as synergistic.

Technology transfer from biomedical research to clinical practice: measuring innovation performance.

Science.gov (United States)

Balas, E Andrew; Elkin, Peter L

2013-12-01

Studies documented 17 years of transfer time from clinical trials to practice of care. Launched in 2002, the National Institutes of Health (NIH) translational research initiative needs to develop metrics for impact assessment. A recent White House report highlighted that research and development productivity is declining as a result of increased research spending while the new drugs output is flat. The goal of this study was to develop an expanded model of research-based innovation and performance thresholds of transfer from research to practice. Models for transfer of research to practice have been collected and reviewed. Subsequently, innovation pathways have been specified based on common characteristics. An integrated, intellectual property transfer model is described. The central but often disregarded role of research innovation disclosure is highlighted. Measures of research transfer and milestones of progress have been identified based on the Association of University Technology Managers 2012 performance reports. Numeric milestones of technology transfer are recommended at threshold (top 50%), target (top 25%), and stretch goal (top 10%) performance levels. Transfer measures and corresponding target levels include research spending to disclosure (0.81), patents to start-up (>0.1), patents to licenses (>2.25), and average per license income (>$48,000). Several limitations of measurement are described. Academic institutions should take strategic steps to bring innovation to the center of scholarly discussions. Research on research, particularly on pathways to disclosures, is needed to improve R&D productivity. Researchers should be informed about the technology transfer performance of their institution and regulations should better support innovators.

Towards a synergic innovation management model: the interplay of market, technology, and management innovations

Directory of Open Access Journals (Sweden)

Leonard Tchuta

2017-03-01

Full Text Available This paper outlines a model of firm innovation management known as the synergic innovation management model. Building on the theory of dynamic capabilities and core competence, the paper suggest three capabilities of firms namely market, technology, management capabilities that drive firms’ innovations. The combination of these three capabilities creates a unique configuration for a firm known as the firm’s core competence that informs the firm's strategic decisions. The synergic innovation management model guides firm in the simultaneous exploration of market, technology, and management innovations required for sustainable business. The paper concludes with limitations of the model and suggestions for further research.

Innovative Alternative Technologies to Extract Carotenoids from Microalgae and Seaweeds.

Science.gov (United States)

Poojary, Mahesha M; Barba, Francisco J; Aliakbarian, Bahar; Donsì, Francesco; Pataro, Gianpiero; Dias, Daniel A; Juliano, Pablo

2016-11-22

Marine microalgae and seaweeds (microalgae) represent a sustainable source of various bioactive natural carotenoids, including β-carotene, lutein, astaxanthin, zeaxanthin, violaxanthin and fucoxanthin. Recently, the large-scale production of carotenoids from algal sources has gained significant interest with respect to commercial and industrial applications for health, nutrition, and cosmetic applications. Although conventional processing technologies, based on solvent extraction, offer a simple approach to isolating carotenoids, they suffer several, inherent limitations, including low efficiency (extraction yield), selectivity (purity), high solvent consumption, and long treatment times, which have led to advancements in the search for innovative extraction technologies. This comprehensive review summarizes the recent trends in the extraction of carotenoids from microalgae and seaweeds through the assistance of different innovative techniques, such as pulsed electric fields, liquid pressurization, supercritical fluids, subcritical fluids, microwaves, ultrasounds, and high-pressure homogenization. In particular, the review critically analyzes technologies, characteristics, advantages, and shortcomings of the different innovative processes, highlighting the differences in terms of yield, selectivity, and economic and environmental sustainability.

Innovative Alternative Technologies to Extract Carotenoids from Microalgae and Seaweeds

Science.gov (United States)

Poojary, Mahesha M.; Barba, Francisco J.; Aliakbarian, Bahar; Donsì, Francesco; Pataro, Gianpiero; Dias, Daniel A.; Juliano, Pablo

2016-01-01

Marine microalgae and seaweeds (microalgae) represent a sustainable source of various bioactive natural carotenoids, including β-carotene, lutein, astaxanthin, zeaxanthin, violaxanthin and fucoxanthin. Recently, the large-scale production of carotenoids from algal sources has gained significant interest with respect to commercial and industrial applications for health, nutrition, and cosmetic applications. Although conventional processing technologies, based on solvent extraction, offer a simple approach to isolating carotenoids, they suffer several, inherent limitations, including low efficiency (extraction yield), selectivity (purity), high solvent consumption, and long treatment times, which have led to advancements in the search for innovative extraction technologies. This comprehensive review summarizes the recent trends in the extraction of carotenoids from microalgae and seaweeds through the assistance of different innovative techniques, such as pulsed electric fields, liquid pressurization, supercritical fluids, subcritical fluids, microwaves, ultrasounds, and high-pressure homogenization. In particular, the review critically analyzes technologies, characteristics, advantages, and shortcomings of the different innovative processes, highlighting the differences in terms of yield, selectivity, and economic and environmental sustainability. PMID:27879659

US hospital payment adjustments for innovative technology lag behind those in Germany, France, and Japan.

Science.gov (United States)

Hernandez, John; Machacz, Susanne F; Robinson, James C

2015-02-01

Medicare pioneered add-on payments to facilitate the adoption of innovative technologies under its hospital prospective payment system. US policy makers are now experimenting with broader value-based payment initiatives, but these have not been adjusted for innovation. This article examines the structure, processes, and experience with Medicare's hospital new technology add-on payment program since its inception in 2001 and compares it with analogous payment systems in Germany, France, and Japan. Between 2001 and 2015 CMS approved nineteen of fifty-three applications for the new technology add-on payment program. We found that the program resulted in $201.7 million in Medicare payments in fiscal years 2002-13-less than half the level anticipated by Congress and only 34 percent of the amount projected by CMS. The US program approved considerably fewer innovative technologies, compared to analogous technology payment mechanisms in Germany, France and Japan. We conclude that it is important to adjust payments for new medical innovations within prospective and value-based payment systems explicitly as well as implicitly. The most straightforward method to use in adjusting value-based payments is for the insurer to retrospectively adjust spending targets to account for the cost of new technologies. If CMS made such retrospective adjustments, it would not financially penalize hospitals for adopting beneficial innovations. Project HOPE—The People-to-People Health Foundation, Inc.

Technological innovations: from bench to bedside.

Science.gov (United States)

Robert, Glenn

2009-09-01

The NHS is perceived to be slower than other healthcare systems in adopting innovative technologies that can deliver patient benefits. This article summarises what is known about the role of nurses in assimilating such innovations into clinical care, and outlines the challenges facing nurse leaders.

Global Health Innovation Technology Models

Directory of Open Access Journals (Sweden)

Kimberly Harding

2016-04-01

Full Text Available Chronic technology and business process disparities between High Income, Low Middle Income and Low Income (HIC, LMIC, LIC research collaborators directly prevent the growth of sustainable Global Health innova‐ tion for infectious and rare diseases. There is a need for an Open Source-Open Science Architecture Framework to bridge this divide. We are proposing such a framework for consideration by the Global Health community, by utiliz‐ ing a hybrid approach of integrating agnostic Open Source technology and healthcare interoperability standards and Total Quality Management principles. We will validate this architecture framework through our programme called Project Orchid. Project Orchid is a conceptual Clinical Intelligence Exchange and Virtual Innovation platform utilizing this approach to support clinical innovation efforts for multi-national collaboration that can be locally sustainable for LIC and LMIC research cohorts. The goal is to enable LIC and LMIC research organizations to acceler‐ ate their clinical trial process maturity in the field of drug discovery, population health innovation initiatives and public domain knowledge networks. When sponsored, this concept will be tested by 12 confirmed clinical research and public health organizations in six countries. The potential impact of this platform is reduced drug discovery and public health innovation lag time and improved clinical trial interventions, due to reliable clinical intelligence and bio-surveillance across all phases of the clinical innovation process.

75 FR 3203 - National Medal of Technology and Innovation Call for 2010 Nominations

Science.gov (United States)

2010-01-20

... outstanding, lasting contribution to the economy through the promotion of technology or technological manpower... contributions to the promotion of technology or technological manpower for the improvement of the economic... highlights the national importance of fostering technological innovation based upon solid science, resulting...

Developing technology intelligence strategy to access knowledge of innovation clusters. : The case of KODAK in Cambridge

OpenAIRE

Dang , Rani Jeanne; Mortara , Letizia; Thomson , Ruth; Minshall , Tim

2010-01-01

International audience; Current times are characterised by a knowledge-based economy and fast technological change. In this difficult environment, companies compete to maintain a relevant position through innovation. In response to these challenges, many companies are currently adopting an open approach to innovation, pursuing innovation by combining internal and external resources. Technology intelligence (TI) activities support the implementation of open innovation with the systematic captu...

GENERAL ENVIRONMENTAL CORPORATION; CURE ELECTROCOAGULATION TECHNOLOGY: INNOVATIVE TECHNOLOGY EVALUATION REPORT

Science.gov (United States)

The CURE electrocoagulation technology was demonstrated under the Superfund Innovative Technology Evaluation (SITE) program at the U.S. Department of Energy (DOE) Rocky Flats Environmental Technology Site (RFETS), where water from the solar evaporation ponds (SEPs) was contaminat...

Measuring Consumer Innovativeness: Identifying Innovators among Consumers of Modern Technologies

Directory of Open Access Journals (Sweden)

Jana Filová

2015-12-01

Full Text Available The methods currently used in innovation marketing research are focused on the late phases of the innovation process and are usually methodologically complex. This limits their practical impact. The presented work aims to create a simple self-report scale applicable in the initial and late phases of the innovation process, highly modular and suitable for a wide range of research. The main battery of questions was inspired by the adopter categorization by Rogers. The questions determine both (1 general characteristics of innovation adopters and (2 their relationship to a specific innovation. The scale was tested during robust longitudinal online research, thematically focused on users of modern technologies. A representative sample of 4,000 Internet users in the Czech Republic took part in the survey from 2013 to 2015. The result is a new self-report scale measuring consumer innovativeness applicable for prototyping, strategic decisions and effective communication of innovations to consumers.

Evaluating the enhancement and improvement of China's technology and financial services platform innovation strategy.

Science.gov (United States)

Wu, Ching-Sung; Hu, Kuang-Hua; Chen, Fu-Hsiang

2016-01-01

The development of high-tech industry has been prosperous around the world in past decades, while technology and finance have already become the most significant issues in the information era. While high-tech firms are a major force behind a country's economic development, it requires a lot of money for the development process, as well as the financing difficulties for its potential problems, thus, how to evaluate and establish appropriate technology and financial services platforms innovation strategy has become one of the most critical and difficult issues. Moreover, how the chosen intertwined financial environment can be optimized in order that high-tech firms financing problems can be decided has seldom been addressed. Thus, this research aims to establish a technology and financial services platform innovation strategy improvement model, as based on the hybrid MADM model, which addresses the main causal factors and amended priorities in order to strengthen ongoing planning. A DEMATEL technique, as based on Analytic Network Process, as well as modified VIKOR, will be proposed for selecting and re-configuring the aspired technology and financial services platform. An empirical study, as based on China's technology and financial services platform innovation strategy, will be provided for verifying the effectiveness of this proposed methodology. Based on expert interviews, technology and financial services platforms innovation strategy improvement should be made in the following order: credit guarantee platform ( C )_credit rating platform ( B )_investment and finance platform ( A ).

Technological Innovation and Strategic Human Resource Management: Developing a Theory.

Science.gov (United States)

Gattiker, Urs E.

Technological innovation affects the structure and content of jobs. Research indicates that there is a need for a theory of technological innovation and strategic human resource management considering several factors, such as an employee's beliefs about the effect of technological innovations on the quality of work life and work content.…

Does Your Department Have a Technology Innovation Strategy?

Science.gov (United States)

Felkey, Bill G; Fox, Brent I

2016-11-01

There are ways to facilitate the successful implementation of technological innovations. These are especially important in a time of rapid development of new tools to support safe and effective medication therapy. This installment addresses some of the key components of a successful technology innovation strategy.

Innovative technology demonstrations

International Nuclear Information System (INIS)

Anderson, D.B.; Hartley, J.N.; Luttrell, S.P.

1992-04-01

Currently, several innovative technologies are being demonstrated at Tinker Air Force Base (TAFB) to address specific problems associated with remediating two contaminated test sites at the base. Cone penetrometer testing (CPT) is a form of testing that can rapidly characterize a site. This technology was selected to evaluate its applicability in the tight clay soils and consolidated sandstone sediments found at TAFB. Directionally drilled horizontal wells have been successfully installed at the US Department of Energy's (DOE) Savannah River Site to test new methods of in situ remediation of soils and ground water. This emerging technology was selected as a method that may be effective in accessing contamination beneath Building 3001 without disrupting the mission of the building, and in enhancing the extraction of contamination both in ground water and in soil. A soil gas extraction (SGE) demonstration, also known as soil vapor extraction, will evaluate the effectiveness of SGE in remediating fuels and TCE contamination contained in the tight clay soil formations surrounding the abandoned underground fuel storage vault located at the SW Tanks Site. In situ sensors have recently received much acclaim as a technology that can be effective in remediating hazardous waste sites. Sensors can be useful for determining real-time, in situ contaminant concentrations during the remediation process for performance monitoring and in providing feedback for controlling the remediation process. A demonstration of two in situ sensor systems capable of providing real-time data on contamination levels will be conducted and evaluated concurrently with the SGE demonstration activities. Following the SGE demonstration, the SGE system and SW Tanks test site will be modified to demonstrate bioremediation as an effective means of degrading the remaining contaminants in situ

Fatores de Influência no Processo de Inovação em Empresas de Base Tecnológica = Influence Factors in the Innovation Process Technology Based Companies

Directory of Open Access Journals (Sweden)

Aléssio Bessa Sarquis

2015-12-01

Full Text Available A inovação é uma estratégia fundamental no setor de base tecnológica. O processo de gestão é influenciado por diferentes fatores do ambiente interno e externo da organização. Assim, o presente estudo buscou analisar os fatores de influência no processo de inovação nas empresas de base tecnológica do Polo Tecnológico de Florianópolis/SC. A coleta de dados primários envolveu a aplicação de pesquisa quantitativa, descritiva não conclusiva, na forma de levantamento de campo (survey, de corte transversal, em 96 empresas de base tecnológica, por meio de questionário autoadministrado e pré-testado. Os resultados apontaram como principais fatores de influência os seguintes: disponibilidade de recursos financeiros/tecnológicos externos; apoio de governo, agências de fomento e associações empresariais; participação de clientes e técnicos externos (fatores do ambiente externo; existência de processo de inovação estruturado; disponibilidade de recursos internos; cultura organizacional favorável à inovação (fatores do ambiente interno.Innovation is a key strategy in technology-based industry, and the management process influenced by different factors of the internal and external environment of the organization. The present study investigates the influence of factors in the innovation process in technology-based companies in the Technological Pole of Florianópolis/SC. The primary data collection involved the application of quantitative research, no conclusive descriptive, in the form of survey, cross-sectional in 96 technology-based companies, through self-administered questionnaire and pre-tested. The results showed the following main influencing factors: availability of financial resources and external technology; support of government, development agencies and business associations; participation of customers and external experts (the external environment factors; existence of structured innovation process

Engineering innovation in healthcare: technology, ethics and persons.

Science.gov (United States)

Bowen, W Richard

2011-01-01

Engineering makes profound contributions to our health. Many of these contributions benefit whole populations, such as clean water and sewage treatment, buildings, dependable sources of energy, efficient harvesting and storage of food, and pharmaceutical manufacture. Thus, ethical assessment of these and other engineering activities has often emphasized benefits to communities. This is in contrast to medical ethics, which has tended to emphasize the individual patient affected by a doctor's actions. However technological innovation is leading to an entanglement of the activities, and hence ethical responsibilities, of healthcare professionals and engineering professionals. The article outlines three categories of innovation: assistive technologies, telehealthcare and quasi-autonomous systems. Approaches to engineering ethics are described and applied to these innovations. Such innovations raise a number of ethical opportunities and challenges, especially as the complexity of the technology increases. In particular the design and operation of the technologies require engineers to seek closer involvement with the persons benefiting from their work. Future innovation will require engineers to have a good knowledge of human biology and psychology. More particularly, healthcare engineers will need to prioritize each person's wellbeing, agency, human relationships and ecological self rather than technology, in the same way that doctors prioritize the treatment of persons rather than their diseases.

Comparing the innovation effects of support schemes for renewable electricity technologies: A function of innovation approach

International Nuclear Information System (INIS)

Río, Pablo del; Bleda, Mercedes

2012-01-01

The aim of this paper is to provide a comparative assessment of the innovation effects of instruments which support the diffusion of renewable electricity technologies with a functions-oriented technological innovation system perspective. The paper provides a link between two major streams of the literature: the functions of innovation systems and the literature on renewable electricity support schemes. We show that, when a functional perspective is adopted, feed-in tariffs are likely to be superior to other policy instruments (quotas with tradable green certificates and tendering), although they still need to be complemented with other instruments, most importantly, direct R and D support. Furthermore, those innovation effects are affected by the specific design elements of the instruments chosen. - Highlights: ► A comparison of the innovation effects of instruments for the diffusion of renewable technologies. ► A functions-oriented technological innovation system perspective. ► A link between the functions of innovation systems and the literature on renewable electricity support schemes. ► Feed-in tariffs are likely to be superior to other instruments. ► Innovation effects are affected by the specific design elements of instruments.

Monitoring innovation in electrochemical energy storage technologies: A patent-based approach

International Nuclear Information System (INIS)

Mueller, Simon C.; Sandner, Philipp G.; Welpe, Isabell M.

2015-01-01

Highlights: • Grid effects of intermittent sources show increasing need for decentralized storage. • Novel patent classification is applied to monitor competing technologies. • Up-to-date geographical, organizational, and qualitative insight is given. • Redox flow patenting shows strong growth, lithium also strong absolute numbers. • Revealed patents allow the expectation of improved modules in the future. - Abstract: Due to the suitability to balance the intermittency in decentralized systems with renewable sources, electrochemical energy storage possibilities have been analyzed in several studies, all highlighting the need for improvements in relevant techno-economic parameters. Particularly a reduction in the costs per cycle is much needed, which could either come from innovation in more cost-efficient manufacturing methods, a higher endurance of charge/discharge sequences or higher capacities. Looking at patent applications as a metric allows us to determine whether the necessary technological progress is indeed occurring, as the mandatory publication of the underlying inventions provides access to otherwise hidden R and D activities. Our paper contributes to the literature with a compilation of technological classes related to important battery types in the novel Cooperative Patent Classification (CPC), which can be used to identify relevant patent applications of the competing technologies. Using the worldwide patent statistical database (PATSTAT), we find that promising technologies have been showing increasing patent counts in recent years. For example, the number of patent applications related to regenerative fuel cells (e.g. redox flow batteries) doubled from 2009 to 2011. Nevertheless, the volume of patent filings in technologies related to lithium remains unchallenged. Patent applications in this area are still growing, which indicates that the introduction of improved modules will continue. Using citation analysis, we have identified

Biology technology, and innovation in high school curriculum

Directory of Open Access Journals (Sweden)

Antonio Carlos Rodrigues de Amorim

1998-01-01

Full Text Available Based on frameworks that propose the contextualization of science education centered in the science/technology/ society relationships, and on the belief that the teacher has a fundamental role on the curriculum innovation processes, this paper describes and analyses different elements of the pedagogical practice of teachers of the city of Campinas/SP, in the perspective of outlining an overview regarding the already existing biology and technology relationship. It focuses in a detailed way the conceptions of the relationships between biology and technology present in the instructional materials used or produced by teachers, describing and discussing the wide range spectrum of identified possibilities. It also emphasizes the approaches to biology and technology relationships identified by interviewing the teachers, being them similar or not to those found in the instructional materials. Indicators of the existence of a problematic theory and practice association, in which the theoretical elements (science are hierarchically superior to the practical elements (technology, were detected. This kind of association should constitute a focus of attention in the construction of innovative proposals for the biology curriculum, since science classroom discussions regarding technology – in their ethical, aesthetical, epistemological, and marketing aspects – represent an important path to dimension the biological knowledge in the capitalist contemporary society.

Technology for Innovation in Radiation Oncology.

Science.gov (United States)

Chetty, Indrin J; Martel, Mary K; Jaffray, David A; Benedict, Stanley H; Hahn, Stephen M; Berbeco, Ross; Deye, James; Jeraj, Robert; Kavanagh, Brian; Krishnan, Sunil; Lee, Nancy; Low, Daniel A; Mankoff, David; Marks, Lawrence B; Ollendorf, Daniel; Paganetti, Harald; Ross, Brian; Siochi, Ramon Alfredo C; Timmerman, Robert D; Wong, John W

2015-11-01

Radiation therapy is an effective, personalized cancer treatment that has benefited from technological advances associated with the growing ability to identify and target tumors with accuracy and precision. Given that these advances have played a central role in the success of radiation therapy as a major component of comprehensive cancer care, the American Society for Radiation Oncology (ASTRO), the American Association of Physicists in Medicine (AAPM), and the National Cancer Institute (NCI) sponsored a workshop entitled "Technology for Innovation in Radiation Oncology," which took place at the National Institutes of Health (NIH) in Bethesda, Maryland, on June 13 and 14, 2013. The purpose of this workshop was to discuss emerging technology for the field and to recognize areas for greater research investment. Expert clinicians and scientists discussed innovative technology in radiation oncology, in particular as to how these technologies are being developed and translated to clinical practice in the face of current and future challenges and opportunities. Technologies encompassed topics in functional imaging, treatment devices, nanotechnology, and information technology. The technical, quality, and safety performance of these technologies were also considered. A major theme of the workshop was the growing importance of innovation in the domain of process automation and oncology informatics. The technologically advanced nature of radiation therapy treatments predisposes radiation oncology research teams to take on informatics research initiatives. In addition, the discussion on technology development was balanced with a parallel conversation regarding the need for evidence of efficacy and effectiveness. The linkage between the need for evidence and the efforts in informatics research was clearly identified as synergistic. Copyright © 2015 Elsevier Inc. All rights reserved.

Open Innovation and Technology Maturity Analysis

Science.gov (United States)

2007-09-11

INFOLOGIC Inc. All rights reserved. Innovation Management Model  Product: Technology-heavy (e.g: Airplane, iPod) OR Service-heavy (e.g: Starbucks ...System, eBay)  Process: Any critical business process to ensure the success of product (e.g: iTune for iPod, Marketing and Supply Chain Management...Integration and Voice of the Customer Voice of the Customer Integration M A T U R I T Y VALUE Radical Innovation Evolutionary Innovation INCREMENTAL

Installed Base as a Facilitator for User-Driven Innovation: How Can User Innovation Challenge Existing Institutional Barriers?

Directory of Open Access Journals (Sweden)

Synnøve Thomassen Andersen

2012-01-01

Full Text Available The paper addresses an ICT-based, user-driven innovation process in the health sector in rural areas in Norway. The empirical base is the introduction of a new model for psychiatric health provision. This model is supported by a technical solution based on mobile phones that is aimed to help the communication between professional health personnel and patients. This innovation was made possible through the use of standard mobile technology rather than more sophisticated systems. The users were heavily involved in the development work. Our analysis shows that by thinking simple and small-scale solutions, including to take the user’s needs and premises as a point of departure rather than focusing on advanced technology, the implementation process was made possible. We show that by combining theory on information infrastructures, user-oriented system development, and innovation in a three-layered analytical framework, we can explain the interrelationship between technical, organizational, and health professional factors that made this innovation a success.

The Opportunities and Challenges of Persuasive Technology in Creating Sustainable Innovation and Business Model Innovation

DEFF Research Database (Denmark)

Aagaard, Annabeth; Lindgren, Peter

2015-01-01

The opportunities of persuasive technology in facilitating sustainable innovation and business model innovation have been witnessed continuously during the last decade. The unique ability of persuasive technology in interacting and mediating across users, customers, decisions makers and other...... stakeholders provides access to core knowledge about behavior and opportunities to influence and even change their behavior in a positive and more sustainable manner. Sustainable innovation and business model innovation is gaining more and more competitive leverage due to customer requirements, the growing...

[Medical doctors driving technological innovation: questions about and innovation management approaches to incentive structures for lead users].

Science.gov (United States)

Bohnet-Joschko, Sabine; Kientzler, Fionn

2010-01-01

Management science defines user-generated innovations as open innovation and lead user innovation. The medical technology industry finds user-generated innovations profitable and even indispensable. Innovative medical doctors as lead users need medical technology innovations in order to improve patient care. Their motivation to innovate is mostly intrinsic. But innovations may also involve extrinsic motivators such as gain in reputation or monetary incentives. Medical doctors' innovative activities often take place in hospitals and are thus embedded into the hospital's organisational setting. Hospitals find it difficult to gain short-term profits from in-house generated innovations and sometimes hesitate to support them. Strategic investment in medical doctors' innovative activities may be profitable for hospitals in the long run if innovations provide first-mover competitive advantages. Industry co-operations with innovative medical doctors offer chances but also bear potential risks. Innovative ideas generated by expert users may result in even higher complexity of medical devices; this could cause mistakes when applied by less specialised users and thus affect patient safety. Innovations that yield benefits for patients, medical doctors, hospitals and the medical technology industry can be advanced by offering adequate support for knowledge transfer and co-operation models.

New Technologies, Old Habits: Automation without Innovation

Directory of Open Access Journals (Sweden)

José Osvaldo De Sordi

2012-01-01

Full Text Available This research investigated the underuse of technological tools by innovative organizations which are acknowledged for their use of and familiarity with new technologies. The research conducted an analysis of 58 institutional repositories (IRs out of 43 educational and research institutions which are internationally renowned for excellence. The core aspect of the analysis was the use of IRs for publishing and dealing with evidence in order to legitimize and add value to scientific research. The following items were analyzed: (a the logical structuring of scientific communication published in the IRs; (b the metadata which describe scientific communication based on the terms of the DCMI protocol used; (c the availability of software functions which facilitate the queries and publication of evidences. Results show that the introduction of IRs did not add value to the quality of research in terms of associating and publishing evidence that could back them up. A strong tendency to replicate the traditional library model of physical collections was observed. It was concluded that merely possessing good technological tools is not sufficient for fostering innovation and strategic gains in organizations, even if their implementation takes place in highly promising and favorable environments.

Technology innovation in an integrated energy economy

International Nuclear Information System (INIS)

Isaacs, E.

2006-01-01

A discussion on technology innovation in an integrated energy economy was presented. The mission, mandate and strategy of the Alberta Research Institute was first presented, followed by a discussion on oil supply needs based on historic demand. The presentation then addressed what might happen as oil demand and supply peak. A comparison of conventional versus unconventional resources was included along with a chart illustrating Alberta's contribution to total global reserves. Other topics addressed in the presentation in chart format included: natural gas requirements and natural gas use in oil sands; marketable gas production and the number of producing gas wells; Alberta's natural gas situation; and net United States imports of natural gas. Options for reducing natural gas consumption in oil sand production processes were also identified. These included steam assisted gravity drainage; solvent processes, electrical heating, combustion, nuclear, geothermal, and gasification processes. Advantages and disadvantages of replacing natural gas through gasification were presented. Last, the presentation provided an unconventional gas technology roadmap and discussed an innovative energy technology program. It was concluded that there are no clear cut options for replacing the huge amount of natural gas needed in the expanding oil sands sector. tabs., figs

Work and technological innovation in organic agriculture.

Science.gov (United States)

Tereso, M J A; Abrahão, R F; Gemma, S F B; Montedo, U B; Menegon, N L; Guarneti, J E; Ribeiro, I A V

2012-01-01

Organic agriculture is a sustainable cultivation ecologically, economically and socially. Several researches in organic agriculture have been made from technical perspectives, economic traits or related to ecological aspects. There are practically no investigations into the nature of the technology used in organic agriculture, especially from an ergonomic perspective. From the activity analysis, this study aimed to map the technology used in the production of organic vegetables. Properties producing organic vegetables were selected representing the State of São Paulo. It was applied an instrument (questionnaire and semi-structured interview) with their managers and it was made visual records to identify adaptations, innovations and technological demands that simultaneously minimize the workload and the difficulties in performing the tasks and increase work productivity. For some of the technological innovations a digital scanner was used to generate a virtual solid model to facilitate its redesign and virtual prototyping. The main results show that organic farmers have little technology in product form. The main innovations that enable competitive advantage or allow higher labor productivity occur in the form of processes, organization and marketing.

The role of innovative remediation technologies

International Nuclear Information System (INIS)

Doesburg, J.M.

1992-05-01

There are currently over 1200 sites on the US Superfund's National Priorities List (NPL) of hazardous waste sites, and there are over 30, 000 sites listed by the Comprehensive Environmental Responsibility, Compensation and Liability Information System (CERCLIS). The traditional approach to remediating sites in the US has been to remove the material and place it in a secure landfill, or in the case of groundwater, pump and treat the effluent. These technologies have proven to be very expensive and don't really fix the problem. The waste is just moved from one place to another. In recent years, however, alternative and innovative technologies have been increasingly used in the US to replace the traditional approaches. This paper will focus on just such innovative remediation technologies in the US, looking at the regulatory drivers, the emerging technologies, some of the problems in deploying technologies, and a case study

Technological innovation in neurosurgery: a quantitative study.

Science.gov (United States)

Marcus, Hani J; Hughes-Hallett, Archie; Kwasnicki, Richard M; Darzi, Ara; Yang, Guang-Zhong; Nandi, Dipankar

2015-07-01

Technological innovation within health care may be defined as the introduction of a new technology that initiates a change in clinical practice. Neurosurgery is a particularly technology-intensive surgical discipline, and new technologies have preceded many of the major advances in operative neurosurgical techniques. The aim of the present study was to quantitatively evaluate technological innovation in neurosurgery using patents and peer-reviewed publications as metrics of technology development and clinical translation, respectively. The authors searched a patent database for articles published between 1960 and 2010 using the Boolean search term "neurosurgeon OR neurosurgical OR neurosurgery." The top 50 performing patent codes were then grouped into technology clusters. Patent and publication growth curves were then generated for these technology clusters. A top-performing technology cluster was then selected as an exemplar for a more detailed analysis of individual patents. In all, 11,672 patents and 208,203 publications related to neurosurgery were identified. The top-performing technology clusters during these 50 years were image-guidance devices, clinical neurophysiology devices, neuromodulation devices, operating microscopes, and endoscopes. In relation to image-guidance and neuromodulation devices, the authors found a highly correlated rapid rise in the numbers of patents and publications, which suggests that these are areas of technology expansion. An in-depth analysis of neuromodulation-device patents revealed that the majority of well-performing patents were related to deep brain stimulation. Patent and publication data may be used to quantitatively evaluate technological innovation in neurosurgery.

User driven innovation in mobile technologies?

DEFF Research Database (Denmark)

Larsen, Casper Schultz; Koch, Christian

2007-01-01

by systems already in function. Stories of prior business successes can be an important tool to ensure further innovative investments since lack of enterprise strategies is often an obstacle for innovation, especially user driven. Both small and large software houses develops dedicated software for coupling...... technology systems relying on the concept of affordance. This paper examines how innovation processes mediate between user orientations and technology offers. There is a great potential for mobile handheld ICT-systems to support numerous work processes in the AEC-industry and this can be substantiated...... site practises, and headquarters - inspired by specific user needs for optimizing work processes. The most important mechanisms evoked for creating the mediating found in the paper are ‘hybrids’ where professionals from AEC establishes a software house, developing ICT-products for specific on...

Key Issues in Global Technological Innovation Projects

Directory of Open Access Journals (Sweden)

Roberto Sbragia

2012-04-01

Full Text Available This article aimed to identify those issues that were present in global technological innovation projects carried out by Brazilian multinational companies and which performance criterions these undertakings met. We investigated 36 global technological innovation projects from Brazilian multinational enterprises through a web-survey. Findings show that these companies went beyond the traditional iron triangle to evaluate their technological efforts and considered additional performance dimensions such as customer satisfaction, business results, and preparation for the future. Results also show high degree of presence for issues emerging from the industry, moderate degree of presence for issues emerging from both the project and R&D activities, and low degree of presence for issues emerging from the headquarters, the subsidiaries, and the external environment. Further research is needed to find out if and how these issues influenced the performance of the global technological innovation projects studied.DOI:10.5585/gep.v3i1.72

Managing Innovation and Change for Instructional Technology.

Science.gov (United States)

Holznagel, Donald C.

1991-01-01

Introduces the term "orgware" and reviews the literature on managing technological innovation in instructional settings. Six areas of management concern are described, and advice on managing innovation and change is provided. (11 references) (GLR)

The differentiated impacts of organizational innovation practices on technological innovation persistence

OpenAIRE

Le Bas , Christian; Mothe , Caroline; Nguyen-Thi , Thuc Uyen

2015-01-01

International audience; Purpose – The purpose of this paper is to test the major determinants of technological (product and process) innovation persistence and provides evidence of the significant role of organizational innovation. Design/methodology/approach – Data came from two waves of the Luxembourg Community Innovation Survey (CIS): CIS2006 for 2004-2006 and CIS2008 for 2006-2008. The longitudinal data set resulted in a final sample of 287 firms. A multinomial probit model estimates the ...

Introduction to Innovative Food Processing and Technology

OpenAIRE

Tokusoglu, Ozlem

2015-01-01

Consumers, the food industry and the regulatory agencies demand the innovative technologies to provide safe and stable foods. Nonthermal processing technologies offer unprecedented opportunities and challenges for the food industry to market safe, high quality health-promoting foods. Those innovative food processing is often perceived as an alternative to thermal food processing, yet there are many nonthermal preparatory unit operations as well as food processing and preservation opportunitie...

Innovation Implementation: The Role of Technology Diffusion Agencies

Directory of Open Access Journals (Sweden)

Jasmin Robertson

2008-08-01

Full Text Available A great deal of ‘innovation failure’ can be attributed to ineffective implementation, rather than failure of the innovation itself. External agencies such as technology diffusion agencies (TDAs have been created to assist organisations to implement innovation successfully, but there has been little empirical research investigating their roles. This paper presents a longitudinal case study of failed innovation implementation, and highlights in particular the role that technology diffusion agencies can play to prevent such failure in future cases. Results indicate the importance of changes in organisational factors such as training, climate, and management support during the implementation process in predicting outcomes, and imply a role for TDAs in assisting with both technical and non-technical aspects of innovation implementation.

Success probability orientated optimization model for resource allocation of the technological innovation multi-project system

Institute of Scientific and Technical Information of China (English)

Weixu Dai; Weiwei Wu; Bo Yu; Yunhao Zhu

2016-01-01

A success probability orientated optimization model for resource al ocation of the technological innovation multi-project system is studied. Based on the definition of the technological in-novation multi-project system, the leveling optimization of cost and success probability is set as the objective of resource al ocation. The cost function and the probability function of the optimization model are constructed. Then the objective function of the model is constructed and the solving process is explained. The model is applied to the resource al ocation of an enterprise’s technological innovation multi-project system. The results show that the pro-posed model is more effective in rational resource al ocation, and is more applicable in maximizing the utility of the technological innovation multi-project system.

Diagnosing Management of Agricultural Research and Technology Development under the Agricultural Innovation Framework

Directory of Open Access Journals (Sweden)

2014-06-01

Full Text Available This study aimed at identifying and analyzing issues and challenges on the agricultural research and technology development under the national innovation framework. The survey consisted of two groups: agricultural researchers of Agriculture-Research and Education Organization and all faculty members of public agricultural faculties of Ministry of Scientific, Research and Technology. Using Cochran sampling formula and multi-stage sampling method, 188 researchers and 205 faculty members were selected in order to fill in the survey questionnaire. Using the SPSS, collected data analyzed based on explanatory factor analysis. Totally, factor analysis of three sets of issues and challenges on the agricultural research and technology development under the national innovation framework led to extract 13 factors, including agricultural structure and policy, infrastructure and resources of agricultural development, supportive services for agricultural development (level of agricultural development, investment and capacity building in research and technology, management of research and technology development, research and technology productivity, research culture, networks for research and technology development (level of national innovation system, agricultural research policy, impacts and effectiveness of agricultural research and technology development, integrated management of research and technology, institutional development for agricultural research and technology and systematic synergy of agricultural research and higher education (level of agricultural innovation system. Totally, these three sets of factors explained 64%, 75% and 73% of the total variances. Finally, using conceptual clustering for the extracted factors, a conceptual model of issues and challenges of agricultural research and technology development under the national innovation framework was presented.

The role of technological innovation in creating radically new product meanings

DEFF Research Database (Denmark)

Krabbe, Anders Dahl

2015-01-01

This paper explores the concept of technological epiphanies from the literature on design driven innovation. A technological epiphany is defined as a product innovation that can be considered radical, both in terms of technology as well as the meaning and experiences it creates through its design....... Three cases of technological epiphanies from the hearing aid industry are analyzed and discussed in terms of how they represent a radical innovation in technology as well as in product meaning and which role the technological aspect has played in the radical innovation of the meaning of the product....... Three different ways in which technology can function as an enabler for the innovation of product meanings are explored and a fourth is found is found during the analysis. The paper concludes by suggesting directions for future research....

Teaching technological innovation and entrepreneurship in polymeric biomaterials.

Science.gov (United States)

Washburn, Newell R

2011-01-01

A model for incorporating an entrepreneurship module has been developed in an upper-division and graduate-level engineering elective on Polymeric Biomaterials (27-311/42-311/27-711/42-711) at Carnegie Mellon University. A combination of lectures, assignments, and a team-based project were used to provide students with a framework for applying their technical skills in the development of new technologies and a basic understanding of the issues related to translational research and technology commercialization. The specific approach to the project established in the course, which represented 20% of the students' grades, and the grading rubric for each of the milestones are described along with suggestions for generalizing this approach to different applications of biomaterials or other engineering electives. Incorporating this model of entrepreneurship into electives teaches students course content within the framework of technological innovation and many of the concepts and tools need to practice it. For students with situational or individual interest in the project, it would also serve to deepen their understanding of the traditional course components as well as provide a foundation for integrating technological innovation and lifelong learning. Copyright © 2010 Wiley Periodicals, Inc.

Software engineering technology innovation: Turning research results into industrial success

NARCIS (Netherlands)

Punter, H.T.; Krikhaar, R.L.; Bril, R.J.

2009-01-01

This paper deals with the innovation of software engineering technologies. These technologies are methods and tools for conducting software development and maintenance. We consider innovation as a process consisting of two phases, being technology creation and technology transfer. In this paper, we

Software engineering technology innovation - Turning research results into industrial success

NARCIS (Netherlands)

Punter, T.; Krikhaar, R.L.; Bril, R.J.

2009-01-01

This paper deals with the innovation of software engineering technologies. These technologies are methods and tools for conducting software development and maintenance. We consider innovation as a process consisting of two phases, being technology creation and technology transfer. In this paper, we

2006 Campus Technology Innovators

Science.gov (United States)

Campus Technology, 2006

2006-01-01

This article features the winners of this year's "Campus Technology Innovator" competition. The winners are: (1) Drexel University, Pennsylvania (outsourcing); (2) Darton College, Georgia (3D); (3) Minnesota State Colleges and Universities (ePortfolios); (4) University of Michigan (the Web); (5) University of Tennessee College of…

Essays on Energy Technology Innovation Policy

Science.gov (United States)

Chan, Gabriel Angelo Sherak

Motivated by global climate change, enhancing innovation systems for energy technologies is seen as one of the largest public policy challenges of the near future. The role of policy in enhancing energy innovation systems takes several forms: public provision of research and develop funding, facilitating the private sector's capability to develop new technologies, and creating incentives for private actors to adopt innovative and appropriate technologies. This dissertation explores research questions that span this range of policies to develop insights in how energy technology innovation policy can be reformed in the face of climate change. The first chapter of this dissertation explores how decision making to allocate public research and development funding could be improved through the integration of expert technology forecasts. I present a framework to evaluate and optimize the U.S. Department of Energy's research and development portfolio of applied energy projects, accounting for spillovers from technical complimentary and competition for the same market share. This project integrates one of the largest and most comprehensive sets of expert elicitations on energy technologies (Anadon et al., 2014b) in a benefit evaluation framework. This work entailed developing a new method for probability distribution sampling that accommodates the information that can be provided by expert elicitations. The results of this project show that public research and development in energy storage and solar photovoltaic technologies has the greatest marginal returns to economic surplus, but the methodology developed in this chapter is broadly applicable to other public and private R&D-sponsoring organizations. The second chapter of this dissertation explores how policies to transfer technologies from federally funded research laboratories to commercialization partners, largely private firms, create knowledge spillovers that lead to further innovation. In this chapter, I study the U

Innovative Alternative Technologies to Extract Carotenoids from Microalgae and Seaweeds

Directory of Open Access Journals (Sweden)

Mahesha M. Poojary

2016-11-01

Full Text Available Marine microalgae and seaweeds (microalgae represent a sustainable source of various bioactive natural carotenoids, including β-carotene, lutein, astaxanthin, zeaxanthin, violaxanthin and fucoxanthin. Recently, the large-scale production of carotenoids from algal sources has gained significant interest with respect to commercial and industrial applications for health, nutrition, and cosmetic applications. Although conventional processing technologies, based on solvent extraction, offer a simple approach to isolating carotenoids, they suffer several, inherent limitations, including low efficiency (extraction yield, selectivity (purity, high solvent consumption, and long treatment times, which have led to advancements in the search for innovative extraction technologies. This comprehensive review summarizes the recent trends in the extraction of carotenoids from microalgae and seaweeds through the assistance of different innovative techniques, such as pulsed electric fields, liquid pressurization, supercritical fluids, subcritical fluids, microwaves, ultrasounds, and high-pressure homogenization. In particular, the review critically analyzes technologies, characteristics, advantages, and shortcomings of the different innovative processes, highlighting the differences in terms of yield, selectivity, and economic and environmental sustainability.

Efficiency of innovative technology in construction industry

Science.gov (United States)

Stverkova, H.; Vaclavik, V.

2017-10-01

The need for sustainability increasingly influences the development of new technologies, business processes and working practices. Innovations are an important part of all business processes. The aim of innovation is, in particular, to reduce the burden on the environment. The current trend in the construction industry is diamond rope cutting. The aim of the paper is to evaluate the most advanced technology for cutting and removing concrete structures in terms of efficiency.

What drives innovation in nuclear reactors technologies? An empirical study based on patent counts

International Nuclear Information System (INIS)

Berthelemy, Michel

2012-01-01

This paper examines the evolution of innovation in nuclear power reactors between 1974 and 2008 in twelve OECD countries and assesses to what extent nuclear innovation has been driven by economic incentives, political decisions and safety regulation considerations. We use priority patent applications related to Nuclear Power Plants (NPPs) as a proxy for innovating activity. Our results highlight that nuclear innovation is partly driven by the conventional paradigm where both demand-pull, measured by NPPs constructions in the innovating country and in the rest of the world, and technology-push, measured by Research and Development (R and D) expenditures specific to NPPs, have a positive and significant impact on innovation. Our results also evidence that the impact of public R and D expenditures and national NPPs construction on innovation is stronger when the quality of innovation, measured by forward patent citations, is taken into account, and have a long run positive impact on innovation through the stock of knowledge available to innovators. In contrast, we show that political decisions following the Three Miles Island and Chernobyl nuclear accidents, measured by NPPs cancellations, have a negative impact on nuclear innovation. Finally, we find that the nuclear safety authority has an ambivalent effect on innovation. On one hand, regulatory inspections have a positive impact on innovation, one the other hand, regulatory decisions to temporarily close a NPP have an adverse impact on innovation. (author)

Indigenous Technological Innovation : Capability and ...

International Development Research Centre (IDRC) Digital Library (Canada)

Indigenous Technological Innovation : Capability and Competitiveness in China's ... IDRC and key partners will showcase critical work on adaptation and ... Call for new OWSD Fellowships for Early Career Women Scientists now open.

Innovations in and by nuclear technology - review and perspectives

International Nuclear Information System (INIS)

Barthelt, K.

1984-01-01

An innovative technology like nuclear technology does not make progress by itself once it has to prove its profitability. It was a long way from technical to economic perfection which took courageous managemental descisions. Since nuclear fission was discovered, its exploitation as an energy source has been perfected. Now it is not only technically safe, reliable and ecological; it has also proved to be economically efficient as compared with the competing primary energies. As with other great innovations, the innovative force of nuclear technology is characterized by two directions: its assimilating capacity and its expanding capacity. Further issues are the so-called technological spin-off of nuclear technology and the fresh impetus nuclear technology gives to other fields. Another aspect beyond technological spin-off affecting all of our society: It was the first large technology requiring risk analyses to be carried out. Discussion broke out in public on the question: ''How safe is nuclear technology''. To sum up, the basic innovation of nuclear technology is now an important economic factor. It came just in time. It is capable of providing relief to the world's energy problems. It is up to us to use it in an intelligent way in the future despite any short-breathed complaints. (orig./HSCH) [de

Energy, environment and technological innovation

Directory of Open Access Journals (Sweden)

Fernando José Pereira da Costa

2015-08-01

Full Text Available The development problems can not be addressed without taking account of the environmental and energy issues, as well as the intimate relationship and the intense interaction between the two. In fact, the energy issue can not be analyzed separately from environmental issues, nor the advances in technological innovation, integrating dynamic-systemic way and so positioning address the issue of the development model to set the bulge the transition process experienced by the world since the seventies of the twentieth century. This transition, in turn, implies the passage of Paradigm of Fossil Fuels to Renewable Energy also called the Paradigm of renewable sources of energy, not just holding the energy problem, but towards to environmental and technological components. It is within this relatively slow and long process, instigator of high levels of volatility, turbulence inducing and motor of technological innovation, which is (re raises the question of the development model that defines how a new model/style development.

Innovative development methodology based on the Toyota Way; Innovative Entwicklungsmethodik basierend auf dem Toyota Way

Energy Technology Data Exchange (ETDEWEB)

Ueda, T. [Toyota Motor Corp., Aichi (Japan)

2007-07-01

Since its foundation, Toyota has been innovating in each process of automobile production based on the ideas shown in the Toyoda Precepts. These innovations are not only innovations in the methodology for various development processes, but also in company philosophy models cultivated by development engineers during their daily job. These are known as the ''Toyota Way'' and its elements which include ''Continuous Improvement'', ''Challenge'', ''Respect for People'', ''Genchi Genbutsu'' and ''Teamwork''. Various technological innovations have already progressed in the process from engine development to production. Examples are the use of CAD (computer aided design) and structure analysis based on 3-D CAD data in hardware development, CFD (computational fluid dynamics) and visualization techniques in combustion system development, MBD (model based development), the related DOE (design of engineering) and new algorithms in software development, as well as new production strategies linked to the new techniques mentioned above. The development of Toyota's direct injection gasoline engine (Toyota D-4 engine) originated from a pre-combustion chamber system in the 1970's with the aim of purifying the exhaust gases when the future of catalyst technology was unpromising. This technology could not be mass-produced, but could subsequently go on to the, R and D of DISC (direct injection stratified charge). In 1996, the stratified charge lean combustion gasoline DI engine could then be launched as the first-generation Toyota D-4 engine. After the second-generation D-4 engine was developed, this technology has now acceded to the dual injection D-4 system (D-4S), which combines it with homogeneous charged stoichiometric combustion and port fuel injection. During this progress, innovative development methods have been used and improvements in production

The Impact of Financial Support System on Technology Innovation: A Case of Technology Guarantee System in Korea

Directory of Open Access Journals (Sweden)

Woo-Seok Jang

2008-04-01

Full Text Available We analyzed the impact of financial support system on technological innovation of small and medium manufacturing firms in Korea, with a special interest in technology guarantee system. This was done using a sample of 1,014 Korean manufacturing firms of which 43% were venture companies. Our study provides two important conclusions. First, the result of empirical analysis indicates that financial support systems have a significant influence on both product innovation and process innovation of SMEs in Korea. Second, a more important conclusion of this research is that technology guarantee system impacts on product innovation; however not on process innovation. This result implies that technology guarantee system attaches more importance to technological innovations related with product development than to those related with process enhancement.

The Influencing Factors, Regional Difference and Temporal Variation of Industrial Technology Innovation: Evidence with the FOA-GRNN Model

Directory of Open Access Journals (Sweden)

Yongli Zhang

2018-01-01

Full Text Available Technology innovation is a motivating force for sustainable development. The recognition and measurement of influencing factors are a basic prerequisite of technology innovation research. In response to the gaps and shortages of existing theories and methods, this paper builds the impact indicators of technology innovation, the proposed FOA-GRNN model, and analyzes the influencing factors, regional differences and temporal variations of technology innovation based on industrial above-scale enterprises of 31 provinces in China from 2008 to 2015. The empirical results show that innovation investment is a determinant of technology innovation in China, and is more and more significant; meanwhile a wide gap of innovation resource between Eastern China and Western China exists. In general, the enterprise scale has a negative effect: with enlargement of enterprise in China, the innovation efficiency of enterprise will decline, while the effect has regional disparity, with positive influence in Central and Western China, and negative influence in Eastern China. Government support has negative effects on technology innovation: indirect equity investment contributes more to technology innovation than direct fund support. Innovation environment has positive and weak effects on technology innovation, but it is the biggest obstacle in Western China, and the innovation environment in China has improved continuously. This paper provides new evidence that can shine some light on determining the factors affecting technology innovation, and also presents a novel approach, which comprises characteristics of nonlinear function approximation, high accuracy and a small sample.

MINERGY CORPORATION GLASS FURNACE TECHNOLOGY EVALUATION: INNOVATION TECHNOLOGY EVALUATION REPORT

Science.gov (United States)

This report presents performance and economic data for a U.S. Environmental Protection Agency (EPA) Superfund Innovative Technology Evaluation (SITE) Program demonstration of the Minergy Corporation (Minergy) Glass Furnace Technology (GFT). The demonstration evaluated the techno...

Which One Triggers the Other? Technological or Social Innovation

Science.gov (United States)

Bulut, Cagri; Eren, Hakan; Halac, Duygu Seckin

2013-01-01

The term "innovation" has sometimes been used as a synonym for technological innovation until the concept of "social innovation" attracted academic attention. Since then, these two types of innovation have been investigated individually. It can be claimed that, despite the great importance of social innovation studies,…

Technology Foresight on Emerging Technologies: Implications for a National Innovation Initiative in Brazil

Directory of Open Access Journals (Sweden)

Maria Fatima Ludovico de Almeida

2015-07-01

Full Text Available Prospective studies about emerging technologies and their implications for public policy formulation indicate critical choices ranging from global to national level, even to the individual firm or institution. Emerging technologies have been shaping the future of some industries and transforming many others. In many cases, these technologies will determine the restructuring of industries as never before. Specially designed for enabling better planning and future decisions, technology foresight (TF methods are used to foresee diffusion of innovations, mapping out commercially viable roadmaps for technological development. This paper is concerned with a methodological instrument adopted in Brazil as support for building the Agenda for a National Innovation Initiative (NII, which was articulated by government, universities, R&D institutions, and private firms. It presents and discusses an integrated methodological approach for a TF study, specially designed for the purpose of this Brazilian innovation policy instrument, concerning three emerging technologies – nanotechnology, biotechnology, and information and communication technologies (ICT.

FY10 Engineering Innovations, Research and Technology Report

Energy Technology Data Exchange (ETDEWEB)

Lane, M A; Aceves, S M; Paulson, C N; Candy, J V; Bennett, C V; Carlisle, K; Chen, D C; White, D A; Bernier, J V; Puso, M A; Weisgraber, T H; Corey, B; Lin, J I; Wheeler, E K; Conway, A M; Kuntz, J D; Spadaccini, C M; Dehlinger, D A; Kotovsky, J; Nikolic, R; Mariella, R P; Foudray, A K; Tang, V; Guidry, B L; Ng, B M; Lemmond, T D; Chen, B Y; Meyers, C A; Houck, T L

2011-01-11

This report summarizes key research, development, and technology advancements in Lawrence Livermore National Laboratory's Engineering Directorate for FY2010. These efforts exemplify Engineering's nearly 60-year history of developing and applying the technology innovations needed for the Laboratory's national security missions, and embody Engineering's mission to ''Enable program success today and ensure the Laboratory's vitality tomorrow.'' Leading off the report is a section featuring compelling engineering innovations. These innovations range from advanced hydrogen storage that enables clean vehicles, to new nuclear material detection technologies, to a landmine detection system using ultra-wideband ground-penetrating radar. Many have been recognized with R&D Magazine's prestigious R&D 100 Award; all are examples of the forward-looking application of innovative engineering to pressing national problems and challenging customer requirements. Engineering's capability development strategy includes both fundamental research and technology development. Engineering research creates the competencies of the future where discovery-class groundwork is required. Our technology development (or reduction to practice) efforts enable many of the research breakthroughs across the Laboratory to translate from the world of basic research to the national security missions of the Laboratory. This portfolio approach produces new and advanced technological capabilities, and is a unique component of the value proposition of the Lawrence Livermore Laboratory. The balance of the report highlights this work in research and technology, organized into thematic technical areas: Computational Engineering; Micro/Nano-Devices and Structures; Measurement Technologies; Engineering Systems for Knowledge Discovery; and Energy Manipulation. Our investments in these areas serve not only known programmatic requirements of today and tomorrow, but

CONTEMPORARY DIGITAL TECHNOLOGIES AND INNOVATIONS IN HUMAN INTELLIGENCE

Directory of Open Access Journals (Sweden)

Riabtseva, N.K.

2017-09-01

Full Text Available New digital technologies not only “change language” (David Cristal, but also “upgrade” human intelligence making it perform new and uncommon operations. The present paper is an analysis and a survey of most prominent innovations in human intelligence, which are instigated by the latest digital information technologies. These innovations include, according to the point of view of outstanding specialists in contemporary digital technologies, such operations as multitasking, serendipity, connectivity, hypermodality, visuality, and cybersemiotic convergence of objective and virtual reality. The paper is based on the data presented in the publications of such outstanding “digital” specialists as Larry Rosen, Jay David Bolter, Steven Downes, Jay Lemke, Gunther Kress, Soren Brier, etc. In their works they particularly stress the impact of digital technologies and internet communication on all spheres of human activities, their role in the inner psychological and mental states, in professional and educational domain, as well as the importance of their investigation and a gap between the intensive development of digital technologies and their insufficient usage in scientific, didactic, social and cultural life. Special attention in the paper focuses on the tendency towards visualization in the global information flows and its role in information processing and knowledge transfer. The paper particularly stresses the fact that the impact of contemporary digital technologies on all spheres of human activities, including the intellectual one, needs further and profound investigation.

Minimizing the cost of subsea developments through technological innovation

International Nuclear Information System (INIS)

Eyre, G.; Loth, B.

1994-01-01

The paper summarizes the results of an extensive study carried out for the UK Government. This assessed the cost and economic impact of technological innovation on subsea and floating developments in the UKCS. The study covered, innovations that could be applied to subsea developments to significantly reduce cost, including multiwell completions, composite pipelines, compartmented pipelines, pipeline specification breaking and autonomous control systems. Cost and economic models were used to assess the economic impact of technological innovation on marginal field developments. The results of these assessments were drawn up as a series of ranking lists designed to assist manufacturers and suppliers in establishing priorities for research and development funding. The study also explored the potential UKCS and World market for innovative subsea technologies and quantified the research and development required to bring key innovations into commercial use

Linking forms of inbound open innovation to a driver-based typology of environmental innovation: Evidence from French manufacturing firms

DEFF Research Database (Denmark)

Li-Ying, Jason; Mothe, Caroline; Nguyen, Thi Thuc Uyen

2017-01-01

Environmental innovation research has not yet clarified how different forms of inbound innovation might exert effects. The current article proposes four driver-based EI types according to two main dimensions: compliance versus voluntary and own value capture versus customer value capture. With a ......Environmental innovation research has not yet clarified how different forms of inbound innovation might exert effects. The current article proposes four driver-based EI types according to two main dimensions: compliance versus voluntary and own value capture versus customer value capture....... With a problem-solving perspective, we develop links from different forms of inbound innovation to various types of EI and test the related hypotheses with two waves of the French Community Innovation Survey. On a short-term basis, R&D cooperation and technology acquisition correlate positively with all four...... types of EI, but over time, persistent R&D cooperation and technology acquisition are associated with EI only at the production stage, according to voluntary/strategic or compliance drivers. Inbound innovation enables quick responses to market demands for EI in the final use stage....

Innovation and technology transfer in the health sciences: a cross-sectional perspective.

Science.gov (United States)

Blanch, L; Guerra, L; Lanuza, A; Palomar, G

2014-11-01

This article is based on the strategic reflection and discussion that took place on occasion of the first conference on innovation and technology transfer in the health sciences organized by the REGIC-ENS-FENIN-SEMICYUC and held in Madrid in the Instituto de Salud Carlos III on May 7th, 2013, with the aim of promoting the transfer of technological innovation in medicine and health care beyond the European program "Horizon 2020". The presentations dealt with key issues such as evaluation of the use of new technologies, the need to impregnate the decisions related to adoption and innovation with the concepts of value and sustainability, and the implication of knowledge networks in the need to strengthen their influence upon the creation of a "culture of innovation" among health professionals. But above all, emphasis was placed on the latent innovation potential of hospitals, and the fact that these, being the large companies that they are, should seriously consider that much of their future sustainability may depend on proper management of their ability to generate innovation, which is not only the generation of ideas but also their transformation into products or processes that create value and economic returns. Copyright © 2014 Elsevier España, S.L.U. and SEMICYUC. All rights reserved.

Quantitative Analysis of Technological Innovation in Urology.

Science.gov (United States)

Bhatt, Nikita R; Davis, Niall F; Dalton, David M; McDermott, Ted; Flynn, Robert J; Thomas, Arun Z; Manecksha, Rustom P

2018-01-01

To assess major areas of technological innovation in urology in the last 20 years using patent and publication data. Patent and MEDLINE databases were searched between 1980 and 2012 electronically using the terms urology OR urological OR urologist AND "surgeon" OR "surgical" OR "surgery". The patent codes obtained were grouped in technology clusters, further analyzed with individual searches, and growth curves were plotted. Growth rates and patterns were analyzed, and patents were correlated with publications as a measure of scientific support and of clinical adoption. The initial search revealed 417 patents and 20,314 publications. The top 5 technology clusters in descending order were surgical instruments including urinary catheters, minimally invasive surgery (MIS), lasers, robotic surgery, and image guidance. MIS and robotic surgery were the most emergent clusters in the last 5 years. Publication and patent growth rates were closely correlated (Pearson coefficient 0.78, P innovation and adoption into clinical practice. Patent metrics identify emergent technological innovations and such trends are valuable to understand progress in the field of urology. New surgical technologies like robotic surgery and MIS showed exponential growth in the last decade with good scientific vigilance. Copyright © 2017 Elsevier Inc. All rights reserved.

Technology-Enhanced Physics Programme for Community-Based Science Learning: Innovative Design and Programme Evaluation in a Theme Park

Science.gov (United States)

Tho, Siew Wei; Chan, Ka Wing; Yeung, Yau Yuen

2015-01-01

In this study, a new physics education programme is specifically developed for a famous theme park in Hong Kong to provide community-based science learning to her visitors, involving her three newly constructed rides. We make innovative use of digital technologies in this programme and incorporate a rigorous evaluation of the learning…

Extending green technology innovations to enable greener fabs

Science.gov (United States)

Takahisa, Kenji; Yoo, Young Sun; Fukuda, Hitomi; Minegishi, Yuji; Enami, Tatsuo

2015-03-01

Semiconductor manufacturing industry has growing concerns over future environmental impacts as fabs expand and new generations of equipment become more powerful. Especially rare gases supply and price are one of prime concerns for operation of high volume manufacturing (HVM) fabs. Over the past year it has come to our attention that Helium and Neon gas supplies could be unstable and become a threat to HVM fabs. To address these concerns, Gigaphoton has implemented various green technologies under its EcoPhoton program. One of the initiatives is GigaTwin deep ultraviolet (DUV) lithography laser design which enables highly efficient and stable operation. Under this design laser systems run with 50% less electric energy and gas consumption compared to conventional laser designs. In 2014 we have developed two technologies to further reduce electric energy and gas efficiency. The electric energy reduction technology is called eGRYCOS (enhanced Gigaphoton Recycled Chamber Operation System), and it reduces electric energy by 15% without compromising any of laser performances. eGRYCOS system has a sophisticated gas flow design so that we can reduce cross-flow-fan rotation speed. The gas reduction technology is called eTGM (enhanced Total gas Manager) and it improves gas management system optimizing the gas injection and exhaust amount based on laser performances, resulting in 50% gas savings. The next steps in our roadmap technologies are indicated and we call for potential partners to work with us based on OPEN INNOVATION concept to successfully develop faster and better solutions in all possible areas where green innovation may exist.

Absorptive capacity, technological innovation, and product life cycle: a system dynamics model.

Science.gov (United States)

Zou, Bo; Guo, Feng; Guo, Jinyu

2016-01-01

While past research has recognized the importance of the dynamic nature of absorptive capacity, there is limited knowledge on how to generate a fair and comprehensive analytical framework. Based on interviews with 24 Chinese firms, this study develops a system-dynamics model that incorporates an important feedback loop among absorptive capacity, technological innovation, and product life cycle (PLC). The simulation results reveal that (1) PLC affects the dynamic process of absorptive capacity; (2) the absorptive capacity of a firm peaks in the growth stage of PLC, and (3) the market demand at different PLC stages is the main driving force in firms' technological innovations. This study also explores a sensitivity simulation using the variables of (1) time spent in founding an external knowledge network, (2) research and development period, and (3) knowledge diversity. The sensitivity simulation results show that the changes of these three variables have a greater impact on absorptive capacity and technological innovation during growth and maturity stages than in the introduction and declining stages of PLC. We provide suggestions on how firms can adjust management policies to improve their absorptive capacity and technological innovation performance during different PLC stages.

Four Essays on Technology Licensing and Firm Innovation

DEFF Research Database (Denmark)

Moreira, Solon

&D strategies. On the supply side, the existing literature has been focused on understanding how technology licensing can be used by firms as a mechanism to recover investments in innovative activities and to foster learning opportunities. On the demand side, it has been shown that licensing is an important...... source that firms can tap into to feed their internal needs for innovative knowledge. While several studies have examined technology licensing through the lens of the licensor, research on how firms rely on licensing contracts to acquire knowledge and improve their innovation performance still leaves......Licensing contracts represent one of the most widely used mechanisms to exchange technologies and transfer know-how between firms. Due to the opportunities that licensing creates for firms operating on both sides of the markets for technology, it has increasingly become an integral part of firms’ R...

The impact of the EU ETS on the sectoral innovation system for power generation technologies - Findings for Germany

International Nuclear Information System (INIS)

Rogge, Karoline S.; Hoffmann, Volker H.

2010-01-01

This paper provides an overview of early changes in the sectoral innovation system for power generation technologies which have been triggered by the European Emission Trading System (EU ETS). Based on a broad definition of the sector, our research analyses the impact of the EU ETS on the four building blocks 'knowledge and technologies', 'actors and networks', 'institutions', and 'demand' by combining two streams of literature, namely systems of innovation and environmental economics. Our analysis for Germany is based on 42 exploratory interviews with experts in the field of the EU ETS, the power sector, and technological innovation. We find that the EU ETS mainly affects the rate and direction of technological change of power generation technologies within the large-scale, coal-based power generation technological regime, to which carbon capture technologies are added as a new technological trajectory. While this impact can be interpreted as the defensive behaviour of incumbents, the observed changes should not be underestimated. We argue that the EU ETS' impact on corporate CO 2 culture and routines may prepare the ground for the transition to a low-carbon sectoral innovation system for power generation technologies.

Product and technology innovation: what can biomimicry inspire?

Science.gov (United States)

Lurie-Luke, Elena

2014-12-01

Biomimicry (bio- meaning life in Greek, and -mimesis, meaning to copy) is a growing field that seeks to interpolate natural biological mechanisms and structures into a wide range of applications. The rise of interest in biomimicry in recent years has provided a fertile ground for innovation. This review provides an eco-system based analysis of biomimicry inspired technology and product innovation. A multi-disciplinary framework has been developed to accomplish this analysis and the findings focus on the areas that have been most strikingly affected by the application of biomimicry and also highlight the emerging trends and opportunity areas. Copyright © 2014 Elsevier Inc. All rights reserved.

Innovative technologies in business hotels

Directory of Open Access Journals (Sweden)

Анастасия Игоревна Сидоренко

2015-10-01

Full Text Available The article analyzes the state and prospects of development of the hotel industry sector in Ukraine, aimed at a business audience that is constantly increasing; the need for the development and implementation of innovative technologies in a business hotel, because in the long term they will provide improving the service levels, the occupancy rate of the hotel rooms and competitiveness. An expediency of introducing innovative wireless LED lighting system in the rooms of business hotels is proved

Technology innovation in an integrated energy economy

Energy Technology Data Exchange (ETDEWEB)

Isaacs, E. [Alberta Energy Research Inst., Edmonton, AB (Canada)

2006-07-01

A discussion on technology innovation in an integrated energy economy was presented. The mission, mandate and strategy of the Alberta Research Institute was first presented, followed by a discussion on oil supply needs based on historic demand. The presentation then addressed what might happen as oil demand and supply peak. A comparison of conventional versus unconventional resources was included along with a chart illustrating Alberta's contribution to total global reserves. Other topics addressed in the presentation in chart format included: natural gas requirements and natural gas use in oil sands; marketable gas production and the number of producing gas wells; Alberta's natural gas situation; and net United States imports of natural gas. Options for reducing natural gas consumption in oil sand production processes were also identified. These included steam assisted gravity drainage; solvent processes, electrical heating, combustion, nuclear, geothermal, and gasification processes. Advantages and disadvantages of replacing natural gas through gasification were presented. Last, the presentation provided an unconventional gas technology roadmap and discussed an innovative energy technology program. It was concluded that there are no clear cut options for replacing the huge amount of natural gas needed in the expanding oil sands sector. tabs., figs.

Technological Innovation and Cooperation for Foreign Information Access Program

Science.gov (United States)

Office of Postsecondary Education, US Department of Education, 2012

2012-01-01

The Technological Innovation and Cooperation for Foreign Information Access (TICFIA) Program supports projects focused on developing innovative technologies for accessing, collecting, organizing, preserving, and disseminating information from foreign sources to address the U.S.' teaching and research needs in international education and foreign…

Cooperative technological innovation and competitiveness in the nuclear arena

International Nuclear Information System (INIS)

Castro Galvan, A.; Marco Pelegrin, M.; Salve Galiana, R.; Vallejo Haya, J.; Tagle Gonzalez, J. A.

2000-01-01

R and D and, more recently, technological innovation and its relationship with competitivity are more and more part of conferences, books, articles and political speeches and very often are the central part of them. Innovation has become fashionable and many initiatives have come out in connection with it. However, the relationship between technological innovation and competitivity are not always obvious. The current article intends to illustrate some mechanisms that link these two concepts through a specific case, DTN, that is already providing results for the Spanish nuclear industry and whose example can be extrapolated to other industrial sectors. The importance given by the nuclear to the innovation, the research and the technological development it is not new either exclusively belong to any specific organisation but makes evident the coherence between its traditional approach and the current idea of modernizing the country promoting the national technological capacity. (Author)

Structured Innovation of High-Performance Wave Energy Converter Technology: Preprint

Energy Technology Data Exchange (ETDEWEB)

Weber, Jochem W. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Laird, Daniel [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2018-01-25

Wave energy converter (WEC) technology development has not yet delivered the desired commercial maturity nor, and more importantly, the techno-economic performance. The reasons for this have been recognized and fundamental requirements for successful WEC technology development have been identified. This paper describes a multi-year project pursued in collaboration by the National Renewable Energy Laboratory and Sandia National Laboratories to innovate and develop new WEC technology. It specifies the project strategy, shows how this differs from the state-of-the-art approach and presents some early project results. Based on the specification of fundamental functional requirements of WEC technology, structured innovation and systemic problem solving methodologies are applied to invent and identify new WEC technology concepts. Using Technology Performance Levels (TPL) as an assessment metric of the techno-economic performance potential, high performance technology concepts are identified and selected for further development. System performance is numerically modelled and optimized and key performance aspects are empirically validated. The project deliverables are WEC technology specifications of high techno-economic performance technologies of TPL 7 or higher at TRL 3 with some key technology challenges investigated at higher TRL. These wave energy converter technology specifications will be made available to industry for further, full development and commercialisation (TRL 4 - TRL 9).

The NIHR Invention for Innovation (i4i) Programme: A Review of Progress and Contributions to Innovation in Healthcare Technologies.

Science.gov (United States)

Marjanovic, Sonja; Krapels, Joachim; Sousa, Sonia; Castle-Clarke, Sophie; Horvath, Veronika; Chataway, Joanna

2015-11-30

The National Institute for Health Research (NIHR) Invention for Innovation (i4i) programme supports the development of innovative medical technologies for patient benefit. The i4i product development stream involves collaborative projects between at least two partners from academia, the NHS and industry. Medical technology innovators apply for funding for one to three years, through a peer review-based process that includes presentation to a selection panel. The funding and business advice provided by i4i support the development of early-stage innovations, generally at proof of concept and prototype stages. Since its inception the product development stream has identified and supported 170 projects, led by 146 principal investigators (PIs). RAND Europe evaluated the programme, with the aim of identifying its outputs and impacts and examining the factors influencing performance. The evaluation findings should help inform the future of the programme. The evaluation used a multi-method approach, including a focused review of background information from i4i, scoping interviews with key informants, a survey of programme participants and case studies of projects representing diverse technologies and health needs.

Innovation in concentrating solar power technologies: A study drawing on patent data

OpenAIRE

Braun, Frauke G.; Hooper, Elizabeth; Wand, Robert; Zloczysti, Petra

2010-01-01

Better understanding the innovative process of renewable energy technologies is important for tackling climate change. Though concentrating solar power is receiving growing interest, innovation studies so far have explored innovative activity in solar technologies in general, ignoring the major differences between solar photovoltaic and solar thermal technologies. This study relies on patent data to examine international innovative activity in concentrating solar power technologies. Our uniqu...

Innovation of Energy Technologies: the role of taxes

OpenAIRE

Copenhagen Economics

2011-01-01

The study deals with the links between energy taxation and innovation and presents also new empirical evidence on the impact of energy taxes on patenting activities related to energy technologies. The study suggests that while taxation is a very effective driver of innovation, it can be usefully complemented with other public policy tools, such as public research grants and other technology policies.

Innovations in Balloon Catheter Technology in Rhinology.

Science.gov (United States)

D'Anza, Brian; Sindwani, Raj; Woodard, Troy D

2017-06-01

Since being introduced more than 10 years ago, balloon catheter technology (BCT) has undergone several generations of innovations. From construction to utilization, there has been a myriad of advancements in balloon technology. The ergonomics of the balloon dilation systems have improved with a focus on limiting the extra assembly. "Hybrid" BCT procedures have shown promise in mucosal preservation, including treating isolated complex frontal disease. Multiple randomized clinical trials report improved long-term outcomes in stand-alone BCT, including in-office use. The ever-expanding technological innovations ensure BCT will be a key component in the armamentarium of the modern sinus surgeon. Copyright © 2017 Elsevier Inc. All rights reserved.

Technology certification and technology acceptance: Promoting interstate cooperation and market development for innovative technologies

International Nuclear Information System (INIS)

Brockbank, B.R.

1995-03-01

In the past two years, public and private efforts to promote development and deployment of innovative environmental technologies have shifted from the analysis of barriers to the implementation of a variety of initiatives aimed at surmounting those barriers. Particular attention has been directed at (1) streamlining fragmented technology acceptance processes within and among the states, and (2) alleviating disincentives, created by inadequate or unverified technology cost and performance data, for users and regulators to choose innovative technologies. Market fragmentation currently imposes significant cost burdens on technology developers and inhibits the investment of private capital in environmental technology companies. Among the responses to these problems are state and federal technology certification/validation programs, efforts to standardize cost/performance data reporting, and initiatives aimed at promoting interstate cooperation in technology testing and evaluation. This paper reviews the current status of these initiatives, identifies critical challenges to their success, and recommends strategies for addressing those challenges

Climatic shocks associate with innovation in science and technology

NARCIS (Netherlands)

C.K.W. de Dreu (Carsten); Dijk, M.A. (Mathijs) van

2018-01-01

textabstractHuman history is shaped by landmark discoveries in science and technology. However, across both time and space the rate of innovation is erratic: Periods of relative inertia alternate with bursts of creative science and rapid cascades of technological innovations. While the origins of

Innovative technologies for in-situ remediation

International Nuclear Information System (INIS)

Ragaini, R.; Aines, R.; Knapp, R.; Matthews, S.; Yow, J.

1994-06-01

LLNL is developing several innovative remediation technologies as long-term improvements to the current pump and treat approaches to cleaning up contaminated soils and groundwater. These technologies include dynamic underground stripping, in-situ microbial filters, and remediation using bremsstrahlung radiation. Concentrated underground organic contaminant plumes are one of the most prevalent groundwater contamination sources. The solvent or fuel can percolate deep into the earth, often into water-bearing regions. Collecting as a separate, liquid organic phase called dense non-aqueous-phase liquids (DNAPLs), or light NAPLs (LNAPLs), these contaminants provide a source term that continuously compromises surrounding groundwater. This type of spill is one of the most difficult environmental problems to remediate. Attempts to remove such material requires a huge amount of water which must be washed through the system to clean it, requiring decades. Traditional pump and treat approaches have not been successful. LLNL has developed several innovative technologies to clean up NAPL contamination. Detailed descriptions of these technologies are given

Climatic shocks associate with innovation in science and technology.

Science.gov (United States)

De Dreu, Carsten K W; van Dijk, Mathijs A

2018-01-01

Human history is shaped by landmark discoveries in science and technology. However, across both time and space the rate of innovation is erratic: Periods of relative inertia alternate with bursts of creative science and rapid cascades of technological innovations. While the origins of the rise and fall in rates of discovery and innovation remain poorly understood, they may reflect adaptive responses to exogenously emerging threats and pressures. Here we examined this possibility by fitting annual rates of scientific discovery and technological innovation to climatic variability and its associated economic pressures and resource scarcity. In time-series data from Europe (1500-1900CE), we indeed found that rates of innovation are higher during prolonged periods of cold (versus warm) surface temperature and during the presence (versus absence) of volcanic dust veils. This negative temperature-innovation link was confirmed in annual time-series for France, Germany, and the United Kingdom (1901-1965CE). Combined, across almost 500 years and over 5,000 documented innovations and discoveries, a 0.5°C increase in temperature associates with a sizable 0.30-0.60 standard deviation decrease in innovation. Results were robust to controlling for fluctuations in population size. Furthermore, and consistent with economic theory and micro-level data on group innovation, path analyses revealed that the relation between harsher climatic conditions between 1500-1900CE and more innovation is mediated by climate-induced economic pressures and resource scarcity.

RIAR experimental base development concept 1. Multi-purpose pyrochemical complex for experimental justification of innovative closed fuel cycle technologies

Energy Technology Data Exchange (ETDEWEB)

Bychkov, A.V.; Kormilitsyn, M.V. [Research Institute of Atomic Reactors, Dimitrovgrad-10, Ulyanovsk region, 433510 (Russian Federation)

2009-06-15

The principles of closed FC arrangement on the basis of non-aqueous methods allow the development of production addressing two tasks simultaneously: production of fresh fuel and reprocessing of irradiated fuel, that makes it possible to achieve the industrial level of implementation of closed FC of fast reactors of new generation in a series variant of standardized process modules on the basis of innovative pyrochemical high-effective compact technologies. For the purpose of experimental justification of innovative closed FC technologies at the RIAR site, the existing experimental base is being updated and a multi-purpose pyrochemical complex is developed: - Experimental complex of pyrochemical molten salt facilities to reprocess all types of spent fuel (MOX, nitride, metallic, IMF) of fast reactors of new generation (BN-800, MBIR, BREST). - Experimental complex of facilities to master a gas-fluoride technology of reprocessing intractable fuel, research reactors fuel and thermal SNF. - Transition of the existing facility of pyro-electrochemical production of MOX fuel into the mode of reprocessing of the BN-800 MOX SNF. - Renovation of the facilities for production of fuel elements from experimental, re-fabricated, innovative and high-active fuel - a complex of heavy and glove boxes - to produce experimental fuel elements and targets with MAs on the basis of oxides (vibro and pellets), mixed nitrides, metal alloys and inert matrices in heavy boxes. - Upgrading of the complex for mastering and demonstration of the processes for radioactive waste management and spent fuel pyrochemical reprocessing. The report covers main concept and design solutions, plans and schedule of the program for development of pyrochemical complex for experimental justification of innovative closed FC technologies. (authors)

76 FR 80901 - National Medal of Technology and Innovation Nomination Evaluation Committee

Science.gov (United States)

2011-12-27

... Nation's highest honor for technological innovation, awarded annually by the President of the United... utilizing technological innovation and/or be familiar with the education, training, employment and... Management/Computing/IT/Manufacturing Innovation; Technological Manpower/Workforce Training/Education. Under...

Accelerating nano-technological innovation in the Danish construction industry

DEFF Research Database (Denmark)

Koch, Christian; Stissing Jensen, Jens

2007-01-01

. The institutional features of the system are furthermore poorly equipped at identifying potentials within high-tech areas. In order to exploit the potentials of nano-technology it is thus argued that an alternative TIS needs to be established. Initiatives should identify and support "incubation rooms" or marked......  By viewing the construction industry as a technological innovation system (TIS) this paper discusses possible initiatives to accelerate nanotechnological innovations. The point of departure is a recent report on the application of nano-technology in the Danish construction industry, which...... concludes that opportunities are generally poorly appreciated by the industry and research communities alike. It is found that the construction industry is characterised by low-tech trajectories where dedicated innovation networks are often too fragile for innovations to stabilize and diffuse...

[The technological innovation strategy for quality control of Chinese medicine based on Big Data].

Science.gov (United States)

Li, Zhen-hao; Qian, Zhong-zhi; Cheng, Yi-yu

2015-09-01

The evolution of the quality control concepts of medical products within the global context and the development of the quality control technology of Chinese medicine are briefly described. Aimed at the bottlenecks in the regulation and quality control of Chinese medicine, using Big Data technology to address the significant challenges in Chinese medicine industry is proposed. For quality standard refinements and internationalization of Chinese medicine, a technological innovation strategy encompassing its methodology, and the R&D direction of the subsequent core technology are also presented.

Development of innovative technological base for large-scale nuclear power

International Nuclear Information System (INIS)

Adamov, E.O.; Dedul, A.V.; Orlov, V.V.; Rachkov, V.I.; Slesarev, I.S.

2017-01-01

The problems of the Nuclear Power (NP) further development as well as the ways of their resolution on the basis of innovative fast reactor concepts and the Closed Equilibrium Fuel Cycle (CEFC) are analyzed. The new paradigm of NP and the corresponding NP super task are declared. The corresponding super task could be considered a transition to the vital risk free nuclear power through the guaranteed elimination/suppression of all their vital risks and threats (or their transformation to the category of some ordinary risks and threats) on the base of ''natural safety principle''. The project of Rosatom State Corporation (named ''PRORYV'') is launched within the Federal Target Program ''Nuclear power technologies of new generation for 2010 to 2015 and in perspective till 2020''. It has been planned just for these goals achievement. Super-task solution is quite ''on teeth'' to PRORYV project which is initially focused on the ''natural safety'' realization. This project is aimed, in particular, at construction of the demonstration lead cooled reactor BREST-300-OD and the enterprise for equilibrium fuel cycle closing.

En-Vac Robotic Wall Scabbler. Innovative Technology Summary Report

International Nuclear Information System (INIS)

2001-01-01

The U.S. Department of Energy (DOE) continually seeks safer and more cost-effective technologies for use in decontamination and decommissioning (D and D) of nuclear facilities. To this end, the Deactivation and Decommissioning Focus Area (DDFA) of the DOE's Office of Science and Technology (OST) sponsors Large-Scale Demonstration and Deployment Projects (LSDDP). At these LSDDPs, developers and vendors of improved or innovative technologies showcase products that are potentially beneficial to DOE's projects and to others in the D and D community. Benefits sought include decreased health and safety risks to personnel and the environment, increased productivity, and decreased cost of operation. The Idaho National Engineering and Environmental Laboratory (INEEL) LSDDP generated a list of statements defining specific needs or problems where improved technology could be incorporated into ongoing D and D tasks. One of the stated needs was for a Robotic Wall Scabbler that would reduce costs and shorten schedules in DOE's Decommissioning Project. This demonstration investigated the associated costs and time required to remove paint from the Test Area North (TAN-607) Decontamination Shop walls by comparing the En-vac Robotic Wall Scabbler against the baseline technology. The baseline technologies consist of the Pentek Vac Pac System with the Pentek Rotopeen and Needle Gun hand-held attachments. This system only removes paint from the surface of concrete. Innovative Technology The En-vac Robotic Wall Scabbler is a remote-controlled scabbling unit with individually motor-controlled wheels that moves horizontally and vertically along floors, walls, and ceilings, adhering to the surface with the help of a high-vacuum suction created at its base (see Figures 1 and 2). The complete En-vac Blasting System consists of the En-vac robot, a recycling unit, a filter, and a vacuum unit, and uses an abrasive, steel-grit blasting technology for the scabbling process. By comparison, this

Marginalization of end-use technologies in energy innovation for climate protection

Science.gov (United States)

Wilson, Charlie; Grubler, Arnulf; Gallagher, Kelly S.; Nemet, Gregory F.

2012-11-01

Mitigating climate change requires directed innovation efforts to develop and deploy energy technologies. Innovation activities are directed towards the outcome of climate protection by public institutions, policies and resources that in turn shape market behaviour. We analyse diverse indicators of activity throughout the innovation system to assess these efforts. We find efficient end-use technologies contribute large potential emission reductions and provide higher social returns on investment than energy-supply technologies. Yet public institutions, policies and financial resources pervasively privilege energy-supply technologies. Directed innovation efforts are strikingly misaligned with the needs of an emissions-constrained world. Significantly greater effort is needed to develop the full potential of efficient end-use technologies.

The impact of the EU ETS on the sectoral innovation system for power generation technologies. Findings for Germany

Energy Technology Data Exchange (ETDEWEB)

Rogge, Karoline [Fraunhofer-Institut fuer Systemtechnik und Innovationsforschung (ISI), Karlsruhe (Germany); Swiss Federal Inst. of Technology Zurich (ETH Zurich) (Switzerland). Dept. of Management, Technology, and Economics; Hoffmann, Volker [Swiss Federal Inst. of Technology Zurich (ETH Zurich) (Switzerland). Dept. of Management, Technology, and Economics

2009-07-01

This paper provides an overview of early changes in the sectoral innovation system for power generation technologies which have been triggered by the European Emission Trading Scheme (EU ETS). Based on a broad definition of the sector, our research analyses the impact of the EU ETS on the four building blocks 'knowledge and technologies', 'actors and networks', 'institutions' and 'demand' by combining two streams of literature, namely systems of innovation and environmental economics. Our analysis is based on 42 exploratory inter-views with German and European experts in the field of the EU ETS, the power sector and technological innovation. We find that the EU ETS mainly affects the rate and direction of the technological change of power generation technologies within the large-scale, coal-based power generation technological regime to which carbon capture technologies are added as a new technological trajectory. While this impact can be interpreted as defensive behaviour of incumbents, the observed changes should not be underestimated. We argue that the EU ETS' impact on corporate CO2 culture and routines may prepare the ground for the transition to a low carbon sectoral innovation system for power generation technologies. (orig.)

Carbon capture and sequestration (CCS) technological innovation system in China: Structure, function evaluation and policy implication

International Nuclear Information System (INIS)

Lai Xianjin; Ye Zhonghua; Xu Zhengzhong; Husar Holmes, Maja; Henry Lambright, W.

2012-01-01

Carbon capture and sequestration (CCS) can be an important technology option for China in addressing global climate change and developing clean energy technologies. Promoted by international climate conventions and supported by government research and development programs, an increasing number of CCS pilot and demonstration projects have been launched in China. In this study, we analyze the structure of China’s CCS effort from a technological innovation system (TIS) perspective. Within this system, key socio-political components, including institutions, actor-networks, and technology development, are examined to evaluate the state of the innovation system. The study assessed the perceived capacity of seven functional areas of the CCS innovation system through a survey of key CCS actors and stakeholders. The findings suggest that China’s CCS innovation system has a strong functional capacity for knowledge and technology development. It is significantly weaker in the innovative functions of knowledge diffusion, market formation, facilitating entrepreneurs and new entrants into the CCS market. Based on the evaluation of China’s technological innovation system to develop CCS, the article articulates specific public policies to formulate a more robust innovation system to traverse the “valley of death” from research and development to commercial deployment and accelerate energy innovation in China. - Highlights: ► We analyze and evaluate China’s CCS innovation system from TIS perspective. ► Strong and systematic CCS innovation system structure has come into being in China. ► The system has acquired high knowledge development and accumulation. ► Weak innovation functions are identified: market creation, guidance, etc. ► Public policies are needed to improve the innovation system performance.

Bringing to Market Technological Innovation: What Distinguishes Success from Failure

Directory of Open Access Journals (Sweden)

Federico Frattini

2012-09-01

Full Text Available Commercialization is a critical step in technological innovation. Nevertheless, many scholars believe that it is often the least well-managed activity of the whole innovation process. The launch stage seems to be particularly critical in high-technology markets because of the volatility, interconnectedness and the proliferation of new technologies they experience. However, academic and practitioners’ literature has not, so far, developed a clear understanding of the factors that distinguish an effective commercialization from an unsuccessful one, especially in high-technology environments. This paper discusses the results of a research project that aimed to understand the ingredients for success in the commercialization of a technological innovation. The first stage of the research consisted of a comparative historical analysis of 18 innovations, which were commercialized in consumer high-tech markets in the last 30 years. The analysis advocates that an effective commercialization comprises three sub-strategies: Early adoption strategy, Adoption network configuration strategy and Mainstream adoption strategy, with each one characterized by a coherent set of commercialization dimensions. The relative importance of each sub-strategy in determining the innovation commercial success depends on the type of innovation that is commercialized, be it radical or incremental and discontinuous or continuous.

Science-based health innovation in sub-Saharan Africa

Directory of Open Access Journals (Sweden)

Daar Abdallah S

2010-12-01

Full Text Available Abstract In recent years emerging markets such as India, China, and Brazil have developed appropriate business models and lower-cost technological innovations to address health challenges locally and internationally. But it is not well understood what capabilities African countries, with their high disease burden, have in science-based health innovation. This gap in knowledge is addressed by this series in BMC International Health and Human Rights. The series presents the results of extensive on-the-ground research in the form of four country case studies of health and biotechnology innovation, six studies of institutions within Africa involved in health product development, and one study of health venture funds in Africa. To the best of our knowledge it is the first extensive collection of empirical work on African science-based health innovation. The four country cases are Ghana, Rwanda, Tanzania and Uganda. The six case studies of institutions are A to Z Textiles (Tanzania, Acorn Technologies (South Africa, Bioventures venture capital fund (South Africa, the Malagasy Institute of Applied Research (IMRA; Madagascar, the Kenyan Medical Research Institute (KEMRI; Kenya, and Niprisan’s development by Nigeria’s National Institute for Pharmaceutical Research and Development and Xechem (Nigeria. All of the examples highlight pioneering attempts to build technological capacity, create economic opportunities, and retain talent on a continent significantly affected by brain drain. They point to the practical challenges for innovators on the ground, and suggest potentially helpful policies, funding streams, and other support systems. For African nations, health innovation represents an opportunity to increase domestic capacity to solve health challenges; for international funders, it is an opportunity to move beyond foreign aid and dependency. The shared goal is creating self-sustaining innovation that has both health and development impacts. While

Science-based health innovation in sub-Saharan Africa.

Science.gov (United States)

Al-Bader, Sara; Masum, Hassan; Simiyu, Ken; Daar, Abdallah S; Singer, Peter A

2010-12-13

In recent years emerging markets such as India, China, and Brazil have developed appropriate business models and lower-cost technological innovations to address health challenges locally and internationally. But it is not well understood what capabilities African countries, with their high disease burden, have in science-based health innovation.This gap in knowledge is addressed by this series in BMC International Health and Human Rights. The series presents the results of extensive on-the-ground research in the form of four country case studies of health and biotechnology innovation, six studies of institutions within Africa involved in health product development, and one study of health venture funds in Africa. To the best of our knowledge it is the first extensive collection of empirical work on African science-based health innovation.The four country cases are Ghana, Rwanda, Tanzania and Uganda. The six case studies of institutions are A to Z Textiles (Tanzania), Acorn Technologies (South Africa), Bioventures venture capital fund (South Africa), the Malagasy Institute of Applied Research (IMRA; Madagascar), the Kenyan Medical Research Institute (KEMRI; Kenya), and Niprisan's development by Nigeria's National Institute for Pharmaceutical Research and Development and Xechem (Nigeria).All of the examples highlight pioneering attempts to build technological capacity, create economic opportunities, and retain talent on a continent significantly affected by brain drain. They point to the practical challenges for innovators on the ground, and suggest potentially helpful policies, funding streams, and other support systems.For African nations, health innovation represents an opportunity to increase domestic capacity to solve health challenges; for international funders, it is an opportunity to move beyond foreign aid and dependency. The shared goal is creating self-sustaining innovation that has both health and development impacts. While this is a long-term strategy

The role of technological innovation in sustainable economic development

OpenAIRE

Andreea Constantinescu; Simona Frone

2014-01-01

As in science an accurate picture of present is highlighted from a future outlook, we should recognize the crucial role of new technologies and innovation to improve knowledge in this field. They may give guarantee of sustainable economic development, provided prioritization of research in some fields such as: information technology and communication, resource depletion and climate change. Technological innovation becomes support of all strategies and policies aimed at ensuring sustainable ec...

Commercial development of environmental technologies for the automotive industry towards a new model of technological innovation

Energy Technology Data Exchange (ETDEWEB)

Clark, W.W. II [Office of Planning and Research, Sacramento, CA (United States); Paolucci, E. [Politecnico di Torino University (Italy). Production and Economics Dept.

2001-07-01

Economic importance of environmental issues is increasing, and new technologies are expected to reduce pollution derived both from productive processes and products, with costs that are still unknown. Until now there is still little knowledge concerning the process of technological innovation in this field. What does exist, is outdated due to rapid change in technology. In this paper we analyse the development of Zinc Air Fuel Cells (ZAFC) and their transfer from research laboratories to large mass production. ZAFC are a new environmental technology, proved to have a commercial value, that can be used for building Zero Emission Vehicles (ZEV). Although ZAFC performances are higher than traditional lead-acid batteries ones, difficulties in funding ZAFC engineering and moving them from laboratories to production caused some years delay in their diffusion. On the bases of this paradigmatic case, we argue that existing economic and organizational literature concerning technological innovation is not able to fully explain steps followed in developing environmental technologies. Existing models mainly consider adoption problems as due to market uncertainty, weak appropriability regime, lack of a dominant design, and difficulties in reconfiguring organizational routines. Additionally, the following aspects play a fundamental role in developing environmental technologies, pointing out how technological trajectories depend both on exogenous market conditions and endogenous firm competencies: 1 regulations concerning introduction of ZEV create market demand and business development for new technologies; they impose constraints that can be met only by segmenting transportation market at each stage of technology development; 2 each stage of technology development requires alternative forms of division and coordination of innovative labour; upstream and downstream industries are involved in new forms of inter-firm relationships, causing a reconfiguration of product architecture

Technology innovation for infectious diseases in the developing world.

Science.gov (United States)

So, Anthony D; Ruiz-Esparza, Quentin

2012-10-25

Enabling innovation and access to health technologies remains a key strategy in combating infectious diseases in low- and middle-income countries (LMICs). However, a gulf between paying markets and the endemicity of such diseases has contributed to the dearth of R&D in meeting these public health needs. While the pharmaceutical industry views emerging economies as potential new markets, most of the world's poorest bottom billion now reside in middle-income countries--a fact that has complicated tiered access arrangements. However, product development partnerships--particularly those involving academic institutions and small firms--find commercial opportunities in pursuing even neglected diseases; and a growing pharmaceutical sector in BRICS countries offers hope for an indigenous base of innovation. Such innovation will be shaped by 1) access to building blocks of knowledge; 2) strategic use of intellectual property and innovative financing to meet public health goals; 3) collaborative norms of open innovation; and 4) alternative business models, some with a double bottom line. Facing such resource constraints, LMICs are poised to develop a new, more resource-effective model of innovation that holds exciting promise in meeting the needs of global health.

INNOVATION TRENDS ON INFORMATION AND COMMUNICATION TECHNOLOGIES

Directory of Open Access Journals (Sweden)

Radu CURETEANU

2010-12-01

Full Text Available The importance of innovation was long underestimated in service activities. In contrast to the radical innovations vital to growth in manufacturing sectors, innovations in services and tourism were secondary and capital-scarce, and for this reason they were excluded from the scope of government interest and action. It is interesting to note that the discourse changed with the emergence of new information and communication technologies, which have been especially influential in the realm of tourism.

The power of design product innovation in sustainable energy technologies

CERN Document Server

Reinders, Angele H; Brezet, Han

2012-01-01

The Power of Design offers an introduction and a practical guide to product innovation, integrating the key topics that are necessary for the design of sustainable and energy-efficient products using sustainable energy technologies. Product innovation in sustainable energy technologies is an interdisciplinary field. In response to its growing importance and the need for an integrated view on the development of solutions, this text addresses the functional principles of various energy technologies next to the latest design processes and innovation methods. From the perspec

Formation of the Innovation Component of Marketing Technologies of Enterprises That Produce Mineral Waters

Directory of Open Access Journals (Sweden)

Golodniuk Olena S.

2014-03-01

Full Text Available The article considers main marketing technologies of building competitive advantages by enterprises that produce Ukrainian mineral waters. It considers individual innovations of the conceptual (eco-marketing and applied (branding, benchmarking and competitive reconnaissance nature with consideration of their significance for participants of this market. It offers directions of increasing the innovation component of topical marketing technologies with the aim of implementation of their results into management of competitive advantages of enterprises. It draws a conclusion about a necessity of: reducing evident and growth of a number of latent competitive advantages, based on intellectual technologies, and also development and realisation of a conceptual model of providing marketing innovations in the system of managing competitive advantages of enterprises; and formation of the system of monitoring marketing innovations with the aim of development of additional services and means of building competitive advantages of enterprises that produce mineral waters.

Searching for a Path: A Bibliometric study on Innovation and Technological Capabilities

Directory of Open Access Journals (Sweden)

João Heitor De Avila Santos

2015-11-01

Full Text Available Innovation is recognize as a matter of survival and success to firms and technological capabilities can lead to an innovative behavior by using technological resources and competences. The literature about technological capability and innovation is vast, counting on several approaches and a large number of researchers involved within. Based on this, our aim is to use a bibliometrics approach to map out the authors, institutions, journals and the evolution of the publication as well, to provide the path needed to build a theoretical framework about the theme. We held this research on the Scopus database using a standard search protocol to perform the selection of the sample. Our results indicates an emerging field of study and a large number papers and citations concentrated in few journals. Most cited authors are related to seminal works on the subject and most cited papers are ones from late 90’s and early 2000. 

Business Models and Technological Innovation

OpenAIRE

Baden-Fuller, Charles; Haefliger, Stefan

2013-01-01

Business models are fundamentally linked with technological innovation, yet the business model construct is essentially separable from technology. We define the business model as a system that solves the problem of identifying who is (or are) the customer(s), engaging with their needs, delivering satisfaction, and monetizing the value. The framework depicts the business model system as a model containing cause and effect relationships, and it provides a basis for classification. We formulate ...

Elucidate Innovation Performance of Technology-driven Mergers and Acquisitions

Energy Technology Data Exchange (ETDEWEB)

Huang, L.; Wang, K.; Yu, H.; Shang, L.; Mitkova, L.

2016-07-01

The importance and value of Mergers and Acquisitions (M&As) have increased with the expectancy to obtain key technology capabilities and rapid impact on innovation. This article develops an original analytical framework to elucidate the impact of the technology and product relatedness (similarity/complementarity) of the Technology-driven M&A’ partners on post-innovation performance. We present results drawing on a multiple case studies of Chinese High-Tech firms from three industries. (Author)

Innovative developments in uranium separation and concentration technology abroad

International Nuclear Information System (INIS)

Liang Jinlong; Zhou Mingsheng; Fang Wei; Sun Yuxiang

2014-01-01

Significance of deeply study the innovative developments in Uranium separation and concentration technology abroad was discussed. Development history and innovativeness of eight species of key equipments for separation and concentration were summarized for the first time. Principle and application of seven Uranium separation and concentration technology were analyzed systematically. It is expounded in the paper that high parameter, intelligent and low carbon were three development trends of Uranium separation and concentration technology. (authors)

High School Students' Reasons for Their Science Dispositions: Community-Based Innovative Technology-Embedded Environmental Research Projects

Science.gov (United States)

Ebenezer, Jazlin; Kaya, Osman Nafiz; Kasab, Dimma

2018-05-01

The purpose of this investigation was to qualitatively describe high school students' reasons for their science dispositions (attitude, perception, and self-confidence) based on their long-term experience with innovative technology-embedded environmental research projects. Students in small groups conducted research projects in and out of school with the help of their teachers and community experts (scientists and engineers). During the 3-year period of this nationally funded project, a total of 135 students from five schools in a mid-west State participated in research activities. Of the 135 students, 53 students were individually interviewed to explore reasons for their science dispositions. Students' reasons for each disposition were grouped into categories, and corresponding frequency was converted to a percentage. The categories of reasons were not only attributed to the use of innovative technologies in environmental research but also the contexts and events that surrounded it. The reasons that influenced students' science dispositions positively were because engaging in environmental research projects with technology contributed to easing fear and difficulty, building a research team, disseminating findings, communicating with the community, researching with scientists, training by teachers, and acknowledging teachers' knowledge. These results advanced how and why students develop science dispositions in the positive direction, which are as follows: building science teacher capacity, developing a community of inquirers, and committing to improve pedagogical practices.

Analysis on Dynamic Decision-Making Model of the Enterprise Technological Innovation Investment under Uncertain Environment

Directory of Open Access Journals (Sweden)

Yong Long

2012-01-01

Full Text Available Under the environment of fuzzy factors including the return of market, performance of product, and the demanding level of market, we use the method of dynamic programming and establish the model of investment decision, in technology innovation project of enterprise, based on the dynamic programming. Analysis of the influence caused by the changes of fuzzy uncertainty factors to technological innovation project investment of enterprise.

Functions of Innovation Systems : A new approach for analysing technological change

NARCIS (Netherlands)

Hekkert, M.P.; Suurs, R.A.A.; Negro, Simona; Kuhlmann, Stefan; Smits, R.E.H.M.

2007-01-01

The central idea of this paper is that innovation systems are a very important determinant of technological change. We describe that the emergence of a new innovation system and changes in existing innovation systems co-evolve with the process of technological change. Therefore, it is necessary to

Imagining value, imagining users: academic technology transfer for health innovation.

Science.gov (United States)

Miller, Fiona Alice; Sanders, Carrie B; Lehoux, Pascale

2009-04-01

Governments have invested heavily in the clinical and economic promise of health innovation and express increasing concern with the efficacy and efficiency of the health innovation system. In considering strategies for 'better' health innovation, policy makers and researchers have taken a particular interest in the work of universities and related public research organizations: How do these organizations identify and transfer promising innovations to market, and do these efforts make best use of public sector investments? We conducted an ethnographic study of technology transfer offices (TTOs) in Ontario and British Columbia, Canada, to consider the place of health and health system imperatives in judgments of value in early-stage health innovation. Our analysis suggests that the valuation process is poorly specified as a set of task-specific judgments. Instead, we argue that technology transfer professionals are active participants in the construction of the innovation and assign value by 'imagining' the end product in its 'context of use'. Oriented as they are to the commercialization of health technology, TTOs understand users primarily as market players. The immediate users of TTOs' efforts are commercial partners (i.e., licensees, investors) who are capable of translating current discoveries into future commodities. The ultimate end users - patients, clinicians, health systems - are the future consumers of the products to be sold. Attention to these proximate and more distal users in the valuation process is a complex and constitutive feature of the work of health technology transfer. At the same time, judgements about individual technologies are made in relation to a broader imperative through which TTOs seek to imagine and construct sustainable innovation systems. Judgments of value are rendered sensible in relation to the logic of valuation for systems of innovation that, in turn, configure users of health innovation in systemic ways.

Determining Technological Innovation and Competitiveness: A Cross Organizational Analysis of the Malaysian Manufacturing Industry

Directory of Open Access Journals (Sweden)

Amlus Ibrahim

2012-01-01

Full Text Available This study analyzed the determinants of technological innovation in the Malaysian manufacturing industry. Its main purpose is to identify a set of management- related variables characterizing Malaysian innovative firms. Moreover, the study aimed to test whether the set of determinant differs for firms with different technological trajectories. A sample of 204 Malaysian firms was used for the investigation, with one respondent from each firm. The questionnaire measured the technological innovation, as well as 5 main potential determinants of innovation adopted from literature. Statistical analysis used, including bivariate correlation and multivariate regression, in identifying association between the technological innovation and the determining variables. The results of the analysis lead the researcher to the model of 5 important determining factors of technological innovation. The important factors were intensity of R&D, trvhnoogical trajectories,intensity of marketing, engineers, scientist and managers with experience locally and technical competency of personnel,. The analysis of technological trajectories confirmed the hypotheses that set of important determinants of innovation as well as the extent of technological innovation differs for firms in different innovation processes.Keywords: Technologies trajectories, technological innovation, intensity of R&D.

Innovative Technology Development Program. Final summary report

International Nuclear Information System (INIS)

Beller, J.

1995-08-01

Through the Office of Technology Development (OTD), the U.S. Department of Energy (DOE) has initiated a national applied research, development, demonstration, testing, and evaluation program, whose goal has been to resolve the major technical issues and rapidly advance technologies for environmental restoration and waste management. The Innovative Technology Development (ITD) Program was established as a part of the DOE, Research, Development, Demonstration, Testing, and Evaluation (RDDT ampersand E) Program. The plan is part of the DOE's program to restore sites impacted by weapons production and to upgrade future waste management operations. On July 10, 1990, DOE issued a Program Research and Development Announcement (PRDA) through the Idaho Operations Office to solicit private sector help in developing innovative technologies to support DOE's clean-up goals. This report presents summaries of each of the seven projects, which developed and tested the technologies proposed by the seven private contractors selected through the PRDA process

Using the regularities of high and critical technologies developing in innovative project management

Directory of Open Access Journals (Sweden)

S. G. Selivanov

2014-01-01

Full Text Available Problem-orientated to the innovative activity, computer-aided systems of production engineering (CASPE integrates design, manufacture, and organization activities using the interrelated innovation principles thus leaning the innovative activity towards the creation of innovative products and technological innovations of high science and technology level and efficiency. In this situation the innovative activity uses in practice not only the newest experience, but also the science laws and consequences, that is, in particular, “Science of Innovations”. The mentioned science laws explain wave dynamics of technical (technological systems development. In the course of innovation activities and/or innovation designing a modification of continuously acting technological system, usually, causes its developing and growing upwards by Sshaped curve. Changing a principle of action changes S-shaped curve development (Fig. 1. If such changes are within the certain “trace tube” we are entitled to state the steady system development.Analysis of changing target function of technological system within the “trace tube” of its steady development characterizes its growing wave dynamics (Fig. 1 using the S-shaped curves (sigmoid type relations. S-shaped innovative development relations of technological systems are, usually, explained by different mathematical models, each being in compliance with the certain process of science and technology. Singular innovative project management using the S-shaped curves can be explained by the following example (Fig.2.To use such management technique it is very important to know the mathematical models of S-curves for different types of innovation projects. That is why we consider given S-shaped relations in-detail for:- developing the high and critical technologies during R&D implementation using the cutting-edge CASSR (computer-aided systems of scientific research of high and critical technologies in innovation

Institutional and societal innovations in information technology for developing countries

NARCIS (Netherlands)

James, M.J.

2012-01-01

Innovation in the developed countries is heavily based on R&D and is closely related to income, skills and infrastructure in those countries. Little is geared towards IT problems of poor countries. This technology does not suit the incomes, skills and so on of poor countries. Fortunately another

Attitudes and Sensory Perceptions of Food Consumers towards Technological Innovation in Mexico: A Case-Study on Rice-Based Dessert

Directory of Open Access Journals (Sweden)

Lizbeth Salgado-Beltrán

2018-01-01

Full Text Available Innovation in the agro-food system has become a strategy increasingly used by companies as a means to increase their competitiveness and position themselves in the market. In this context, the objective of this work is to identify the attitudes and sensory perceptions of consumers towards food technology through two scales (food technology neophobia and domain specific innovativeness and hedonic tastings. For this, a new product was selected in the market: powder to prepare rice with milk. Most consumers have attitudes toward low neophobia to products with food technology, but there is also some caution, a situation that is corroborated by the moderate predisposition towards innovations. Color and flavor attributes can make the difference in positive perceptions. It should not be forgotten that there is a segment of innovative consumers that represent a key market.

Technological Innovation – A Route Towards Sustainability

Directory of Open Access Journals (Sweden)

Gráinne Kavanagh

2012-06-01

Full Text Available The sustainability of small and medium-sized enterprises (SMEs  is constantly challenged on today’s dynamic operating environment. Evolving regulatory trends, difficult economic conditions, and diminishing natural resources, pose serious questions for all players across the food system. Technological innovation, as a means of ensuring future sustainability in the same in the face of such challenges, has been the focus of significant government investment in Ireland. This paper, aims to facilitate a greater understanding of the motivations and barriers influencing the decision by food SMEs to invest in technological innovation emanating from research conducted in publicly‐funded research institutes.

Choice of Innovative Technologies as a Factor of Modernization of the Industrial Plants

Directory of Open Access Journals (Sweden)

Evgheniya A. Panfilova

2015-01-01

Full Text Available The article analyzes the need to develop a new type of interaction between providers of the equipment and its end-users in a changing social and cultural reality. This type of interaction is a guarantee of innovative modernization of Russian industrial facilities, as it is based on a revision of the social reality in light of new information and/or knowledge. The choice of innovative technologies that contribute to fruitful and qualitative relationships among the actors of the social process acquires significance since there have been changes in the role, objectives and potential of technology. The author focuses on the changes in perceptions of social time and space, reflection of consumers (the impact of economic, social and psychological factors on their decision to purchase, and suppliers. There is a reflection of the habitus of social actors in the context of social interaction, based on the organization of innovative practices. Today technology is also reflecting, its symbolic characteristics, contained in the codes of signification, become more important, than technical ones. The research is based on in-depth interviews with experts from the pharmaceutical industry aimed at identifying the factors influencing the decision to purchase an innovative high-quality imported equipments and machinery, which would contribute to the modernization of the existing production process. The author concludes that adequate reflection which promotes the creation and dissemination of new social practices based on close and confidential contacts and development of flexible communication tools would provide for successful modernization of Russia.

Water Technology Innovation: 10 Market Opportunities

Science.gov (United States)

The Water Technology Innovation Blueprint offers an overview of market opportunities that include conserving and recovering energy, recovering nutrients, improving water infrastructure, reducing costs for water monitoring, and improving water quality.

A novel fiber-based adsorbent technology

Energy Technology Data Exchange (ETDEWEB)

Reynolds, T.A. [Chemica Technologies, Inc., Bend, OR (United States)

1997-10-01

In this Phase I Small Business Innovation Research program, Chemica Technologies, Inc. is developing an economical, robust, fiber-based adsorbent technology for removal of heavy metals from contaminated water. The key innovation is the development of regenerable adsorbent fibers and adsorbent fiber cloths that have high capacity and selectivity for heavy metals and are chemically robust. The process has the potential for widespread use at DOE facilities, mining operations, and the chemical process industry.

Decoupling management and technological innovations: Resolving the individualism-collectivism controversy

OpenAIRE

Cerne, Matej; Jaklic, Marko; Skerlavaj, Miha

2013-01-01

This is the authors' final and accepted version of the article, post refereeing. Publisher's version is available at www.sciencedirect.com This study aims to resolve the contradictory previous research findings on the relationship between individualism–collectivism and innovation. We draw on innovation theory and relate to the difference between non-technological (management) and technological innovation types as well as to the distinction between exploration and exploitation (inv...

Influence of Technological Assets on Organizational Performance through Absorptive Capacity, Organizational Innovation and Internal Labour Flexibility

Directory of Open Access Journals (Sweden)

Encarnación García-Sánchez

2018-03-01

Full Text Available Organizational innovation is increasingly mandatory for firms to overcome their competitors. Organizational innovation is especially relevant in today’s dynamic and turbulent environments, where other internal variables—such as technological assets, employee training, coordination of new management capabilities, and new flexible human resources and more adaptable organizational designs—must be encouraged to create value and competitive advantage. The purpose of our research is to analyse whether technological assets influence absorptive capacity (potential and realized absorptive capacity and how absorptive capacity influences internal labour flexibility, organizational innovation and performance. We achieve these goals by analysing the interrelations among internal labour flexibility, organizational innovation and performance, using the theory of resources and capabilities. A quantitative study was carried out with data gathered by personal interview using a structured questionnaire. Relationships proposed in the theoretical model were estimated through a structural equation model, using a sample of 160 European technology companies. The results show that support for technology and improvement of technological skills and technological distinctive competencies promote improvement in organizational performance through their positive influence on the processes of potential and realized absorption capacity. Potential absorptive capacity influences realized absorptive capacity, which impacts not only internal labour flexibility but also organizational innovation and organizational performance. Further, internal labour flexibility influences organizational performance through organizational innovation. This issue is of particular interest when considering the dynamic nature of turbulent technological environments in which the organization operates. Technological assets thus identify new sources of flexibility and organizational innovation based

Governing Science, Technology and Innovation:

DEFF Research Database (Denmark)

Jensen, Jens Stissing

2007-01-01

Abstract: As an object of public management, Science, Technology and Innovation (STI) is characterised by a high level of uncertainty and complexity. The paper argues that to cope with the phenomenon of STI as a coherent area of policy formulation and regulation, a balancing of rational-, reflexi...

Sectoral dynamics and technological convergence: an evolutionary analysis of eco-innovation in the automotive sector

DEFF Research Database (Denmark)

Faria, Lourenco; Andersen, Maj Munch

2017-01-01

We know from evolutionary theory that sectoral characteristics are important to innovation. This paper investigates if sectoral characteristics also are important to eco-innovation, a hitherto under-researched theme. We argue that research into possible sectoral patterns in eco-innovation is key...... 1965 to 2012, focusing on powertrain technologies. The empirical analysis is based on patent data amongst big car producers and focuses on identifying changes in two main aspects: (1) the convergence/divergence of firms’ green strategies and technologies within the automotive sector; and (2......) the contribution of alternative key green technological trajectories relative to the dominant design. Our findings indicate that the evolution of relative green patenting has followed a positive, linear growth over the last decades with increasing participation of alternative propulsion technologies and increasing...

Innovative and basic researches for high temperature technologies at HTTR

International Nuclear Information System (INIS)

Shiozawa, Shusaku

1995-01-01

The HTTR is the first HTGR which is under construction at JAERI. The objectives of the HTTR are to establish basic technologies for HTGRs, to upgrade technologies for HTGRs and to conduct innovative and basic researches for high temperature technologies. The first two are concerned with HTGR developments. The last one is not necessarily for HTGR developments, but for future innovative researches which are expected to be applied to various technologies. (author)

Wind Technology: A Framework for the Evaluation of Innovations¿ Impacts on the Diffusion Potential

NARCIS (Netherlands)

Dinica, V.

2010-01-01

This paper proposes a framework based on which innovations in wind power technologies can be evaluated from the standpoint of their contribution to diffusion expansion. The framework helps build up a missing link between the technical literature on innovations and policy-oriented contributions

Cone penetrometer: Innovative technology summary report

International Nuclear Information System (INIS)

1996-04-01

Cone penetrometer technology (CPT) provides cost-effective, real-time data for use in the characterization of the subsurface. Recent innovations in this baseline technology allow for improved access to the subsurface for environmental restoration applications. The technology has been improved by both industry and government agencies and is constantly advancing due to research efforts. The U.S. Department of Energy (DOE) Office of Science and Technology (formerly Technology Development) has contributed significantly to these efforts. This report focuses on the advancements made in conjunction with DOE's support but recognizes Department of Defense (DOD) and industry efforts

Need to Knowledge (NtK) Model: an evidence-based framework for generating technological innovations with socio-economic impacts.

Science.gov (United States)

Flagg, Jennifer L; Lane, Joseph P; Lockett, Michelle M

2013-02-15

Traditional government policies suggest that upstream investment in scientific research is necessary and sufficient to generate technological innovations. The expected downstream beneficial socio-economic impacts are presumed to occur through non-government market mechanisms. However, there is little quantitative evidence for such a direct and formulaic relationship between public investment at the input end and marketplace benefits at the impact end. Instead, the literature demonstrates that the technological innovation process involves a complex interaction between multiple sectors, methods, and stakeholders. The authors theorize that accomplishing the full process of technological innovation in a deliberate and systematic manner requires an operational-level model encompassing three underlying methods, each designed to generate knowledge outputs in different states: scientific research generates conceptual discoveries; engineering development generates prototype inventions; and industrial production generates commercial innovations. Given the critical roles of engineering and business, the entire innovation process should continuously consider the practical requirements and constraints of the commercial marketplace.The Need to Knowledge (NtK) Model encompasses the activities required to successfully generate innovations, along with associated strategies for effectively communicating knowledge outputs in all three states to the various stakeholders involved. It is intentionally grounded in evidence drawn from academic analysis to facilitate objective and quantitative scrutiny, and industry best practices to enable practical application. The Need to Knowledge (NtK) Model offers a practical, market-oriented approach that avoids the gaps, constraints and inefficiencies inherent in undirected activities and disconnected sectors. The NtK Model is a means to realizing increased returns on public investments in those science and technology programs expressly intended to

Development of innovative technological base for large-scale nuclear power

Energy Technology Data Exchange (ETDEWEB)

Adamov, E.O.; Dedul, A.V.; Orlov, V.V.; Rachkov, V.I.; Slesarev, I.S. [ITC ' ' PRORYV' ' Project, Moscow (Russian Federation)

2017-04-15

The problems of the Nuclear Power (NP) further development as well as the ways of their resolution on the basis of innovative fast reactor concepts and the Closed Equilibrium Fuel Cycle (CEFC) are analyzed. The new paradigm of NP and the corresponding NP super task are declared. The corresponding super task could be considered a transition to the vital risk free nuclear power through the guaranteed elimination/suppression of all their vital risks and threats (or their transformation to the category of some ordinary risks and threats) on the base of ''natural safety principle''. The project of Rosatom State Corporation (named ''PRORYV'') is launched within the Federal Target Program ''Nuclear power technologies of new generation for 2010 to 2015 and in perspective till 2020''. It has been planned just for these goals achievement. Super-task solution is quite ''on teeth'' to PRORYV project which is initially focused on the ''natural safety'' realization. This project is aimed, in particular, at construction of the demonstration lead cooled reactor BREST-300-OD and the enterprise for equilibrium fuel cycle closing.

Technological Innovation: Concept, Process, Typology and Implications in the Economy

Directory of Open Access Journals (Sweden)

Mihaela DIACONU

2011-10-01

Full Text Available Growing interest worldwide to boost innovation in business sector activities, especially the technology, is intended to maintain or increase national economic competitiveness, inclusively as an effect of awareness concerning the effects resulting from economic activity on consumption of resources and environment, which requires design of new patterns of production and consumption. In this paper we review the most important contributions in the literature in terms of the implications of technological innovation in the economy, at the microand macroeconomic level, viewing the organization's ability to generate new ideas in support of increasing production, employment and environmental protection, starting from the concepts of innovation, innovation process and, respectively, from the innovation typology analysis.

The Technological Innovations and Their Impact on the Economy

Directory of Open Access Journals (Sweden)

Mikhail Ivanovich Maslennikov

2017-12-01

Full Text Available Drastic and inclusive technology progress is changing the economy of Russia and foreign countries. This progress significantly impacts production forces. . This paper analyzes theoretical and applied approaches to the investigation of production forces development. I reveal the role and importance of innovations in science and technology as well as their impact on various segments of the economy. I analyze the conceptual framework used for technological shifts. The paper describes the indicators showing the level of scientific and technological potential development in various countries and regions including the Urals. I define growth areas in technology and assess their contribution to gross domestic product (GDP growth. The administrations and authorities at federal and regional levels impact the development of science, innovations, technologies and breakthrough areas. The development of these spheres leads to the increase in productivity of social activities, production and business activity. The paper reveals the impact of the technological breakthrough in such latest fields as the alternative energy sources, drones, electric car industry, storage and delivery of energy. This fields transform the economy and society. Furthermore, they change theoretical concepts of functional and institutional social structure. The development paradigm is to be modified from fuel and raw model to the innovative and technological one. The economic development and scientific and technological potential are interrelated. I discuss the reason of close attention to the development of science, technologies, innovations in the developed countries. as well as the measures to stimulate their development. The article studies the mechanism and tools of science and education funding in various regions of the world. The results of the research may be used for updating the strategy of scientific and technological development of Russia and its regions in the current

Concept relation discovery and innovation enabling technology (CORDIET)

NARCIS (Netherlands)

Poelmans, J.; Elzinga, P.; Neznanov, A.; Viaene, S.; Kuznetsov, S.O.; Ignatov, D.; Dedene, G.

2011-01-01

Concept Relation Discovery and Innovation Enabling Technology (CORDIET), is a toolbox for gaining new knowledge from unstructured text data. At the core of CORDIET is the C-K theory which captures the essential elements of innovation. The tool uses Formal Concept Analysis (FCA), Emergent Self

Research report of innovation of industrial technology in FY 1996; 1996 nendo sangyo gijutsu no innovation chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

Remarkable innovations of the Japanese industry in various fields have been extracted and evaluated during the 50 post-war years. In this report, a method of capturing the innovations of industrial technology is examined. It is essential to clarify the social role of industrial technology, and the original views of this research are indicated by focusing on the innovation process in order to clarify the connections between those of mutual industry, technical management, man-power, and unique Japanese technology. The innovations achieved by the Japanese industry during post-war 50 years are classified into eight categories, i.e., automobiles, iron, aero-space/railways, machines, national land/energy, chemicals/fine ceramics, electronics/information/communication, and life, to clarify the technological progress in each field. In Japan, the industrial technology has been developed with learning from fundamental researches in Europe and the USA. In the future, it is necessary to independently develop industrial frontier. 4 figs., 47 tabs.

Modeling technology innovation: how science, engineering, and industry methods can combine to generate beneficial socioeconomic impacts.

Science.gov (United States)

Stone, Vathsala I; Lane, Joseph P

2012-05-16

Government-sponsored science, technology, and innovation (STI) programs support the socioeconomic aspects of public policies, in addition to expanding the knowledge base. For example, beneficial healthcare services and devices are expected to result from investments in research and development (R&D) programs, which assume a causal link to commercial innovation. Such programs are increasingly held accountable for evidence of impact-that is, innovative goods and services resulting from R&D activity. However, the absence of comprehensive models and metrics skews evidence gathering toward bibliometrics about research outputs (published discoveries), with less focus on transfer metrics about development outputs (patented prototypes) and almost none on econometrics related to production outputs (commercial innovations). This disparity is particularly problematic for the expressed intent of such programs, as most measurable socioeconomic benefits result from the last category of outputs. This paper proposes a conceptual framework integrating all three knowledge-generating methods into a logic model, useful for planning, obtaining, and measuring the intended beneficial impacts through the implementation of knowledge in practice. Additionally, the integration of the Context-Input-Process-Product (CIPP) model of evaluation proactively builds relevance into STI policies and programs while sustaining rigor. The resulting logic model framework explicitly traces the progress of knowledge from inputs, following it through the three knowledge-generating processes and their respective knowledge outputs (discovery, invention, innovation), as it generates the intended socio-beneficial impacts. It is a hybrid model for generating technology-based innovations, where best practices in new product development merge with a widely accepted knowledge-translation approach. Given the emphasis on evidence-based practice in the medical and health fields and "bench to bedside" expectations for

Innovation and technology transfer through global value chains: Evidence from China's PV industry

International Nuclear Information System (INIS)

Zhang, Fang; Gallagher, Kelly Sims

2016-01-01

China's success as a rapid innovation follower in the infant Photovoltaic (PV) industry surprised many observers. This paper explores how China inserted itself into global clean energy innovation systems by examining the case of the solar PV industry. The paper decomposes the global PV industrial value chain, and determines the main factors shaping PV technology transfer and diffusion. Chinese firms first entered PV module manufacturing through technology acquisition, and then gradually built their global competitiveness by utilizing a vertical integration strategy within segments of the industry as well as the broader PV value chain. The main drivers for PV technology transfer from the global innovation system to China are global market formation policy, international mobilization of talent, the flexibility of manufacturing in China, and belated policy incentives from China's government. The development trajectory of the PV industry in China indicates that innovation in cleaner energy technologies can occur through both global and national innovation processes, and knowledge exchange along the global PV value chain. - Highlights: •The value chain analytical approach is synergized with the theories of technology transfer and innovation systems. •A detailed review of how China integrated itself into the global solar PV innovation system is provided. •Four main factors shape PV technology transfer to China across various value chain segments. •Innovation in cleaner energy technologies is a combination of global and national innovation processes.

Disruptive innovation potential of the value propositions of 3D printing technology startups

DEFF Research Database (Denmark)

Jensen, Søren; Tanev, Stoyan; Hahn, Finn

2014-01-01

3D printing (or additive manufacturing) is a term used to describe the production of tangible products by using digitally controlled machine tools. The novelty of this manufacturing approach consists in the selective addition of materials layer-upon-layer, rather than through machining from solid...... material objects, moulding or casting. 3D printing (3DP) technologies have the potential to change the traditional manufacturing paradigm as well as to enable the emergence of new innovation practices based on mass customization, user design and distributed product innovation. As a result, 3DP...... potential of 3DP technology startups. The objective of this research is to empirically examine the existing business opportunities in the 3D printing technology sector. To meet this objective we have addressed two research questions: a) How do technology startups integrate new 3D printing technologies...

[Innovative educational technology in the teaching of propaedeutic of internal diseases].

Science.gov (United States)

Тusupbekova, К; Bakirova, R; Nursultanova, S

2015-03-01

This article presents analysis of the results of inculcation of innovative learning technologies in teaching on propaedeutic of internal diseases which is first clinical discipline faced by medical students of the University. Credit-modular training included integration of propaedeutic of internal diseases with basic disciplines of the third year (the normal anatomy, physiology, pathological anatomy, histology, pathophysiology, visual diagnostics and pharmacology). There are 8 models on following systems: respiratory, cardiovascular, musculoskeletal, endocrine, urogenital, hematopoietic, nervous, digestive. The innovative implementation of learning technologies (Problem-based learning, clinical cases, team-oriented teaching, lectures, symposium lectures, discussions, role plays, etc.) and knowledge control (mini-clinical examination, objective structured clinical exam, comprehensive testing) help students to acquire clinical skills, team working and skills of researching work.

Model for acquiring innovative waste immobilization technologies

International Nuclear Information System (INIS)

Dole, L.R.; Singh, S.P.N.

1988-01-01

The US Department of Energy's (DOE's) Oak Ridge Operations (ORO) has established the Waste Management Technology Center (WMTC) at Oak Ridge National Laboratory to assist in meeting the environmental requirements for federal facilities as stated in the Resource Conservation and Recovery Act (RCRA) and the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA). The WMTC will bring innovative mixed chemical and radioactive waste treatment and site closure technologies to bear on the many mixed chemical and radioactive waste problems at the DOE-ORO facilities located in Tennessee, Kentucky, and Ohio. The WMTC seeks innovative technologies through a phased procurement cycle that encourages the teaming of emerging technologies with experienced contractors in order to comply with on-site requirements of DOE orders concerning protection of the environment. This three-phase procurement cycle includes: (1) a feasibility study and implementation plan, (2) an on-site pilot demonstration, and (3) full-scale implementation. This paper describes the statements of work for some related demonstrations and remedial actions

Recombinant Innovation and Endogenous Transitions

OpenAIRE

Koen Frenken; Luis R. Izquierdo; Paolo Zeppini

2012-01-01

We propose a model of technological transitions based on two different types of innovations. Branching innovations refer to technological improvements along a particular path, while recombinant innovations represent fusions of multiple paths. Recombinant innovations create “short-cuts” which reduce switching costs allowing agents to escape a technological lock-in. As a result, recombinant innovations speed up technological progress allowing transitions that are impossible with only branching ...

The Disposition Parameters of the Technological and Innovation Gap in the Global Economy

Directory of Open Access Journals (Sweden)

Mikaelian Suren G.

2017-12-01

Full Text Available The aim of the study is to specify the disposition parameters of the technological and innovation gap in the global economy and determine the directions for overcoming it. It is proved that the process of technological asymmetry is reflected in the technological and innovation gap in the global economy. The positions of the countries-innovation leaders are clarified with the attention being focused on the growth of China’s influence through its efforts in technological innovations. There described the transformation of the positions in two planes: production of and trade in high-tech products. A hypothesis about the change in the nature of innovations during the last decade is confirmed. It is proved that the affordability of the formation of advanced technologies in China has become a reason for its transformation into the powerhouse of the world economic development. There identified and characterized the directions for bridging the gap between economies, which include increasing investment on the global innovation scale; promoting the spread of technologies and their adaptation; ensuring an unimpeded flow of talents and knowledge; using intellectual property rights to promote innovation for the poor, improve the innovation efficiency; entering markets.

Educational innovation, learning technologies and Virtual culture potential'

Directory of Open Access Journals (Sweden)

David Riley

2002-12-01

Full Text Available Learning technologies are regularly associated with innovative teaching but will they contribute to profound innovations in education itself? This paper addresses the question by building upon Merlin.Donald's co-evolutionary theory of mind, cognition and culture. He claimed that the invention of technologies for storing and sharing external symbol systems, such as writing, gave rise to a 'theoretic culture' with rich symbolic representations and a resultant need for formal education. More recently, Shaffer and Kaput have claimed that the development of external and shared symbol-processing technologies is giving rise to an emerging 'virtual culture'. They argue that mathematics curricula are grounded in theoretic culture and should change to meet the novel demands of 'virtual culture' for symbol-processing and representational fluency. The generic character of their cultural claim is noted in this paper and it is suggested that equivalent pedagogic arguments are applicable across the educational spectrum. Hence, four general characteristics of virtual culture are proposed, against which applications of learning technologies can be evaluated for their innovative potential. Two illustrative uses of learning technologies are evaluated in terms of their 'virtual culture potential' and some anticipated questions about this approach are discussed towards the end of the paper.

How innovation commons contribute to discovering and developing new technologies

Directory of Open Access Journals (Sweden)

Darcy W.E. Allen

2016-09-01

Full Text Available In modern economics, the institutions surrounding the creation and development of new technologies are firms, markets and governments. We propose an alternative theory that locates the institutional origin of new technologies further back in the commons when self-organizing groups of technology enthusiasts develop effective governance rules to pool distributed information resources. The ‘innovation commons’ alleviates uncertainty around a nascent technology by pooling distributed information about uses, costs, problems and opportunities. While innovation commons are mostly temporary, because the resource itself – the information about opportunities – is only temporarily valuable, they are a further addition to the Pantheon of commons, and suggest that the institutions of the commons – and the common pool resource of information about applications of the technology – may be far more important in the study of innovation than previously thought.

Roadmapping and Strategy in Science, Technology and Innovation: Why connectivity matters

DEFF Research Database (Denmark)

Ricard, Lykke Margot

The thesis focuses on the coordination of technology-intensive innovation activities at both sector and firm levels, supported by the use of the strategic roadmapping method. Investigations combine qualitative and quantitative research methods; using a narrative approach in the form of interviews...... as an interactive process to develop competences among technology users, producers, research institutions, and politicians. As a result, knowledge on how the platforms evolved, and their dynamics, provide new reflections on the innovation systems approach: that connectivity seems to change along the changes...... to uncover innovation and technology barriers, and a social network analysis of stakeholders’ role in relation to two technology platforms: TPWind and ZEP (Zero Emission Platform), during a five-year period when the roadmaps 2020 were developed. In this respect, the thesis emphasizes the view of innovation...

ON THE ECONOMIC ESSENCE CONCEPT INNOVATION AND INNOVATION IN LAND TENURE

Directory of Open Access Journals (Sweden)

Tretyak A.M.

2016-08-01

Full Text Available Transformation processes that take place at the present stage in Ukraine's economy, connected with the formation of innovative development model, which is directly based on obtaining of the new scientific results and their technological implementation in production, зproviding a real GDP increase is mainly due to the production and sale of high technology products. It is characterized by the presence of government policy and legislation designed to stimulate of innovation processes, the prevalence of intellectual nature of work on industrial and integrated technologies. Therefore, in performing the tasks to ensure the dynamic development of the economy's primary role is played by innovation and innovation activities. Innovative economy (knowledge economy, intellectual economy – type of economy based on innovation stream, on constant technological improvement, in manufacturing and exporting of high technology products with a high added value and themselves technologies. It is assumed that this is mainly income creates intelligence of innovators and scientists, information sphere, rather than material production (industrial economy and not the concentration of finance (capital. Innovative Economy includes six main components: education; science; human capital, including high quality of life and highly qualified specialists; innovation systemthat includes legislative framework and material components of the innovation system (technology transfer centers, business incubators, technology parks, technopolises, innovation centers, clusters, territory of development of high technology venture business etc.; innovative industry that implements innovations; favorable environment of functioning of scientific and educational system, work and life of innovators. The number of major components of an effective innovation economy in land management can be reduced to four: high-quality scientific and educational system in the broad definition; effective

Demonstrating and implementing innovative technologies: Case studies from the USDOE Office of Technology Development

International Nuclear Information System (INIS)

Brouns, T.M.; Koegler, K.J.; Mamiya, L.S.

1995-02-01

This paper describes elements of success for demonstration, evaluation, and transfer for deployment of innovative technologies for environmental restoration. They have been compiled from lessons learned through the US Department of Energy (DOE) Office of Technology Development's Volatile Organic Compounds in Arid Soil Integrated Demonstration (VOC-Arid ID). The success of the VOC-Arid ID program was determined by the rapid development demonstration, and transfer for deployment of technologies to operational sites that improve on safety, cost, and/or schedule of performance over baseline technologies. The VOC-Arid ID successfully fielded more than 25 innovative technology field demonstrations; several of the technologies demonstrated have been successfully transferred for deployment Field demonstration is a critical element in the successful transfer of innovative technologies into environmental restoration operations. The measures of success for technology demonstrations include conducting the demonstration in a safe and controlled environment and generating the appropriate information by which to evaluate the technology. However, field demonstrations alone do not guarantee successful transfer for deployment There are many key elements throughout the development and demonstration process that have a significant impact on the success of a technology. This paper presents key elements for a successful technology demonstration and transfer for deployment identified through the experiences of the VOC-Arid ID. Also, several case studies are provided as examples

The Impact of Postgraduate Health Technology Innovation Training: Outcomes of the Stanford Biodesign Fellowship.

Science.gov (United States)

Wall, James; Hellman, Eva; Denend, Lyn; Rait, Douglas; Venook, Ross; Lucian, Linda; Azagury, Dan; Yock, Paul G; Brinton, Todd J

2017-05-01

Stanford Biodesign launched its Innovation Fellowship in 2001 as a first-of-its kind postgraduate training experience for teaching biomedical technology innovators a need-driven process for developing medical technologies and delivering them to patients. Since then, many design-oriented educational programs have been initiated, yet the impact of this type of training remains poorly understood. This study measures the career focus, leadership trajectory, and productivity of 114 Biodesign Innovation Fellowship alumni based on survey data and public career information. It also compares alumni on certain publicly available metrics to finalists interviewed but not selected. Overall, 60% of alumni are employed in health technology in contrast to 35% of finalists interviewed but not selected. On leadership, 72% of alumni hold managerial or higher positions compared to 48% of the finalist group. A total of 67% of alumni reported that the fellowship had been "extremely beneficial" on their careers. As a measure of technology translation, more than 440,000 patients have been reached with technologies developed directly out of the Biodesign Innovation Fellowship, with another 1,000,000+ aided by solutions initiated by alumni after their training. This study suggests a positive impact of the fellowship program on the career focus, leadership, and productivity of its alumni.

Investigating the Influence of Technology Inflows on Technology Outflows in Open Innovation Processes : A Longitudinal Analysis

NARCIS (Netherlands)

Sikimic, U.; Chiesa, V.; Frattini, F.; Scalera, V.G.

2016-01-01

The open innovation (OI) paradigm emphasizes the importance of integrating inbound and outbound flows of technology to increase a firm's innovation performance. While the synergies between technology inflows and outflows have been discussed in conceptual OI articles, the majority of empirical

Environmental information system and odour monitoring based on citizen and technology innovative sensors

International Nuclear Information System (INIS)

Ledent, Philippe; Stevenot, Bernard; Delva, Julien

2013-01-01

The challenge is the integration of citizens as ''community-based'' observation providers, giving the odour perception and discomfort and getting feed-back in real time from a learning monitoring system. The level of annoyance depends on how odours are emitted and in what intensity, their dispersion under ambient atmospheric conditions and finally on citizens' exposure and perception. The Environmental Information System and Odour Monitoring developed in the project OMNISCIENTIS funded by the EU brings together state of the art technologies and open communication capabilities in order to mitigate odour annoyance. The project allows for citizen feedback, deepens knowledge on odour measurement and management and aims to support harmonised legislation at EU level. Moreover the project results can provide savings to industries. The core is an information system allowing inhabitants to serve as human sensors, acting according to sociological patterns, which influence odour perception, discomfort and nuisance. It provides a dedicated tool to consider odour acceptability, based on a community-based opinion. Due to the subjective nature of odour perception, odour monitoring and fast modelling is used to assist and adjust the information citizens provide via Smartphone and obtained by e-nose and modelling. Innovative in-situ sensors are improved to monitor ambient odour exposures. A specific odour dispersion model system is developed to obtain interrelated spatial odour exposure levels. This fast and innovative model system helps us to evaluate the performance of measures taken at the very moment odours are emitted and with respect to the way in which these occur. The Living Lab approach ensures stakeholder involvement, citizens' participation in decision-making and supports dissemination activities. The results are conveyed to stakeholders and general public. (orig.)

An inquiry on dimensions of external technology search and their influence on technological innovations: evidence from Chinese firms

DEFF Research Database (Denmark)

Li-Ying, Jason; Wang, Yuandi; Salomo, Søren

2014-01-01

A central part of technological innovation for industrial firms involves search for new external knowledge. A well‐established stream of literature on firms' external knowledge search has demonstrated that firms investing in broader search may have a great ability to innovate. In this paper, we...... explore the influences of technology search on firms' technological innovation performance along three distinctive dimensions: technical, geographic, and temporal dimensions, using a unique panel data set containing information on Chinese firms that were active in technology in‐licensing and patenting...... during the period 2000–2009. Our findings reveal that Chinese firms' technological innovation performances are related to external technology search in quite different ways from the ones suggested in the extant literature using evidence from developed countries. We find that Chinese firms searching...

Innovative Technologies in Science Teaching

Science.gov (United States)

Guerra, Cecilia; Pombo, Lucia; Moreira, Antonio

2011-01-01

Technology plays a crucial role in pupils' and primary teachers' lives nowadays and its use can facilitate change towards an innovative school environment. The internet, for example, can act as a platform to foster science teaching and offers a variety of opportunities for effective science learning and engaging and motivating children. But…

Technology Integration and Innovation during Reflective Teaching

Science.gov (United States)

Baporikar, Neeta

2016-01-01

With emerging innovations, the use of technology tools to make learning process effective is foreseeable. Hence, appropriate incorporation of technology can make a valuable contribution to the learning and undoubtedly reflection is core to learning. With today's twenty-first century learners, it is important that educators advocate integrating…

Innovation diffusion, technological convergence and economic growth

OpenAIRE

R. Andergassen; F. Nardini; M. Ricottilli

2013-01-01

The paper investigates the mechanics through which novel technological principles are developed and diffused throughout an economy consisting of a technologically heterogeneous ensemble of firms. In the model entrepreneurs invest in the discovery and in the diffusion of a technological principle and their profit flow depends on how many firms adopt the innovation and on how long it takes other entrepreneurs to improve it. We show that technological convergence emerges from the competition amo...

River Protection Project Technology and Innovation Roadmap.

Energy Technology Data Exchange (ETDEWEB)

Reid, D. S. [Hanford Site (HNF), Richland, WA (United States); Wooley, T. A. [Hanford Site (HNF), Richland, WA (United States); Kelly, S. E. [Hanford Site (HNF), Richland, WA (United States)

2017-08-14

The Technology and Innovation Roadmap is a planning tool for WRPS management, DOE ORP, DOE EM, and others to understand the risks and technology gaps associated with the RPP mission. The roadmap identifies and prioritizes technical areas that require technology solutions and underscores where timely and appropriate technology development can have the greatest impact to reduce those risks and uncertainties. The roadmap also serves as a tool for determining allocation of resources.

Bringing to Market Technological Innovation: What Distinguishes Success from Failure

OpenAIRE

Frattini, Federico; Massis, Alfredo De; Chiesa, Vittorio; Cassia, Lucio; Campopiano, Giovanna

2012-01-01

Commercialization is a critical step in technological innovation. Nevertheless, many scholars believe that it is often the least well-managed activity of the whole innovation process. The launch stage seems to be particularly critical in high-technology markets because of the volatility, interconnectedness and the proliferation of new technologies they experience. However, academic and practitioners' literature has not, so far, developed a clear understanding of the factors that distinguish a...

Using the regularities of high and critical technologies developing in innovative project management

OpenAIRE

S. G. Selivanov; S. V. Poezjalova; A. F. Shayhulova

2014-01-01

Problem-orientated to the innovative activity, computer-aided systems of production engineering (CASPE) integrates design, manufacture, and organization activities using the interrelated innovation principles thus leaning the innovative activity towards the creation of innovative products and technological innovations of high science and technology level and efficiency. In this situation the innovative activity uses in practice not only the newest experience, but also the science laws and con...

Business model innovation vs. business model inertia: The role of disruptive technologies

OpenAIRE

Vorbach, Stefan; Wipfler, Harald; Schimpf, Sven

2017-01-01

This contribution addresses the impact of disruptive technologies on business model innovation. While such technologies have the potential to significantly alter the way in which businesses operate, business model inertia hinders companies from adopting the new technological possibilities. Little research has focused on the difficulties incumbents face when innovating their business models. By reviewing current literature on business model innovation, this paper summarizes challenges companie...

Technological economics: innovation, project management, and technology transfer

Energy Technology Data Exchange (ETDEWEB)

Bradbury, F R

1981-06-01

The relationship between economics and technology, as well as their interaction in production, productivity, project management, and in technology transfer processes are reviewed. Over the last two decades there has been an increasing interest by economists in the technologist's view of technical change and its mechanisms. The author looks at the zone between technology and economics, the technological economics, and discusses the theory of innovation recently sketched out by Nelson and Winter. The relevance to project management and technology transfer of contemporary writing by economists leads to the view that there are welcome signs of a convergence of the conceptual models now emerging and the practical problems of technology management and movement. Economists now seem more willing to come to terms with technology than technologists with economics. The economic significance of the multitudes of technically unglamorous activities in development work is seriously neglected as a result of over-emphasis on the spectacular technological break. If economic elegance were to be admitted to the criteria of success, one might get a significant improvement in the engineering of technological change. 29 references, 4 figure.

Determinants of the pace of global innovation in energy technologies.

Science.gov (United States)

Bettencourt, Luís M A; Trancik, Jessika E; Kaur, Jasleen

2013-01-01

Understanding the factors driving innovation in energy technologies is of critical importance to mitigating climate change and addressing other energy-related global challenges. Low levels of innovation, measured in terms of energy patent filings, were noted in the 1980s and 90s as an issue of concern and were attributed to limited investment in public and private research and development (R&D). Here we build a comprehensive global database of energy patents covering the period 1970-2009, which is unique in its temporal and geographical scope. Analysis of the data reveals a recent, marked departure from historical trends. A sharp increase in rates of patenting has occurred over the last decade, particularly in renewable technologies, despite continued low levels of R&D funding. To solve the puzzle of fast innovation despite modest R&D increases, we develop a model that explains the nonlinear response observed in the empirical data of technological innovation to various types of investment. The model reveals a regular relationship between patents, R&D funding, and growing markets across technologies, and accurately predicts patenting rates at different stages of technological maturity and market development. We show quantitatively how growing markets have formed a vital complement to public R&D in driving innovative activity. These two forms of investment have each leveraged the effect of the other in driving patenting trends over long periods of time.

Impact of Technological Innovations on Customers in an Emerging Banking Industry in Ghana

DEFF Research Database (Denmark)

Kofi Wireko, Joseph; Ameme, Bright

2016-01-01

. Whilst banks derive efficiency from these innovations, customers are however impacted with convenience and transaction costs offered by these innovative services and electronic activities. This study sought to understand the impact of these electronic banking services on customer satisfaction and related....... Whilst the study concluded that there is a significant relationship between customer satisfaction and technological innovations in the Ghanaian banking industry, it was revealed that the costs associated with technological innovations in banking have also increased transactions costs to the disadvantages......Without continuous technological innovations in today’s highly digital world, it will be extremely difficult for banks to remain relevant within the competitive landscape. Bank customers are also becoming very sophisticated and their demands drive the direction of these technological innovations...

Innovation Strategies and Challenges in Emerging Economies: The Case of Research and Technology Organizations in Turkey

OpenAIRE

F. Demir

2017-01-01

Innovation is highly critical for every company, especially for technology-based organizations looking to sustain their competitive advantage. However, this is not an easy task. Regardless of the size of the enterprise, market and location, all organizations face numerous challenges. Even though huge barriers to innovation exist in different countries, firm- and industry-specific challenges can be distinguished. This paper examines innovation strategies and obstacles to innovation in research...

HIGH VOLTAGE ENVIRONMENTAL APPLICATIONS, INC.ELECTRON BEAM TECHNOLOGY - INNOVATIVE TECHNOLOGY EVALUATION REPORT

Science.gov (United States)

This report evaluates a high-voltage electron beam (E-beam) technology's ability to destroy volatile organic compounds (VOCs) and other contaminants present in liquid wastes. Specifically, this report discusses performance and economic data from a Superfund Innovative Technology...

Identifying technology innovations for marginalized smallholders-A conceptual approach.

Science.gov (United States)

Malek, Mohammad Abdul; Gatzweiler, Franz W; Von Braun, Joachim

2017-05-01

This paper adds a contribution in the existing literature in terms of theoretical and conceptual background for the identification of idle potentials of marginal rural areas and people by means of technological and institutional innovations. The approach follows ex-ante assessment for identifying suitable technology and institutional innovations for marginalized smallholders in marginal areas-divided into three main parts (mapping, surveying and evaluating) and several steps. Finally, it contributes to the inclusion of marginalized smallholders by an improved way of understanding the interactions between technology needs, farming systems, ecological resources and poverty characteristics in the different segments of the poor, and to link these insights with productivity enhancing technologies.

Technology Transmission Across National Innovation Systems

DEFF Research Database (Denmark)

Haakonsson, Stine Jessen; Slepniov, Dmitrij

This paper advances our understanding of how technology upgrading in the Chinese wind turbine industry is linked to internationalisation of Danish component suppliers. In order to grasp the interlinkages and implications hereof, the paper combines perspectives of global value chains (GVC), national.......e. linking up with global suppliers in the wind turbine global value chain, and the new role of component suppliers as technology transmitters across national innovation systems into emerging markets. Conceptually, the paper contributes to understanding how technological catching up in value chains links...

Technology Transmission Across National Innovation Systems

DEFF Research Database (Denmark)

Haakonsson, Stine Jessen; Slepniov, Dmitrij

2018-01-01

This paper advances our understanding of how technology upgrading in the Chinese wind turbine industry is linked to internationalisation of Danish component suppliers. In order to grasp the interlinkages and implications hereof, the paper combines perspectives of global value chains (GVC), national.......e. linking up with global suppliers in the wind turbine global value chain, and the new role of component suppliers as technology transmitters across national innovation systems into emerging markets. Conceptually, the paper contributes to understanding how technological catching up in value chains links...

Innovation outcomes of South African new technology-based firms: a contribution to the debate on the performance of science park firms

Directory of Open Access Journals (Sweden)

Kai-Ying Alice Chan

2011-12-01

Full Text Available Science parks are often established to drive regional economic growth, especially in countries with emerging economies. However, mixed findings regarding the performances of science park firms are found in the literature. This study tries to explain these mixed findings by taking a relational approach and exploring (unintended knowledge transfers between new technology-based firms (NTBFs in the emerging South African economy. Moreover, the innovation outcomes of these NTBFs are examined by using a multi-dimensional construct. Results show that science park location plays a significant role in explaining innovative sales, but is insignificant when a different indicator of innovation outcomes is used. Furthermore, only for innovations that are new to the firms, both science park location and intended knowledge transfer via informal business relationships have a positive impact; whereas social relationships have a negative impact.

CERN’s Challenge-Based Innovation course welcomes new students

CERN Multimedia

Kate Kahle

2014-01-01

What do you get when you mix students from around the world with detector technologies developed at CERN and ask them to solve societal problems? Welcome to the Challenge-Based Innovation course.   The CBI students at IdeaSquare – a CERN building currently being renovated, which will be inaugurated in December. Students at CERN are no surprise; the Laboratory welcomes hundreds each year. But these 45 students, travelling from Spain, Finland, Norway, Italy and even Australia, are studying design, engineering, business and more. With their mix of backgrounds, they have come to CERN this week to view detector technologies in a very different way. They are here to follow the Challenge-Based Innovation (CBI) course, a Masters-level student programme developed by CERN in collaboration with a number of universities worldwide. They will be grouped into six teams and shown a range of detector technologies in collaboration with coaches and inspiration partners. In just six months, they will...

Mozambique Science, Technology and Innovation Review | IDRC ...

International Development Research Centre (IDRC) Digital Library (Canada)

This project aims to strengthen the capacity of the Mozambique Ministry of Science and Technology (MOST) to govern the country's science, technology and innovation (STI) system, and of researchers and policymakers to conduct systematic reviews of STI policy implementation. It will do so by supporting a review of the ...

Remaking the UK's energy technology innovation system: From the margins to the mainstream

International Nuclear Information System (INIS)

Winskel, Mark; Radcliffe, Jonathan; Skea, Jim; Wang, Xinxin

2014-01-01

The UK energy technology innovation system (ETIS) has undergone wholesale remaking in recent years, in terms of its aims, funding and organisation. We analyse this process and distinguish between three phases since 2000: new beginnings, momentum building and urgency and review. Within an international trend to ETIS rebuilding, UK experience has been distinctive: from a low starting base in the early-2000s, to system remaking under a strong decarbonisation policy imperative in the late-2000s, to multiple and contested drivers in the early-2010s. Public funding levels have been erratic, with a rapid increase and a more recent decline. The private business sector has played a leading role in this remaking, and as this influence has grown, the role and style of energy innovation has shifted from long term niches to the shorter term mainstream. The UK ETIS suffers from persistent problems: fragmentation, low transparency and weak links to the research evidence base. - Highlights: • Analyses the dramatic recent remaking of the UK energy technology innovation system. • Identifies three distinct phases of innovation dynamics and governance since 2000. • The private sector has played a leading role in UKs innovation system rebuilding. • There has been a broad shift from niche to mainstream, continuity-based innovation. • The UK system suffers from unstable funding, fragmentation and low transparency

Complex engineering objects construction using Multi-D innovative technology

International Nuclear Information System (INIS)

Agafonov, Alexey

2013-01-01

Multi-D technology is an integrated innovative project management system for a construction of complex engineering objects based on a construction process simulation using an intellectual 3D model. Multi-D technology includes: • The unified schedule of E+P+C; • The schedule of loading of human resources, machines & mechanisms; • The budget of expenses and the income integrated with the schedule; • 3D model; • Multi-D model; • Weekly-daily tasks (with 4th level schedules); • Control system of interaction of Customer-EPC(m) company - Contractors; • Change and configuration management system

Health, Work Intensity, and Technological Innovations

OpenAIRE

Raouf Boucekkine; Natali Hritonenko; Yuri Yatsenko

2013-01-01

Work significantly affects human life and health. Overworking may decrease the quality of life and cause direct economic losses. Technological innovations encourage modernization of firms' capital and improve labor productivity in the workplace. The paper investigates the optimal individual choice of work intensity under improving technology embodied in new equipment leading to shorter lifetime of capital goods (obsolescence). The balanced growth trajectories are analyzed in this context to f...

Examination of incentive mechanisms for innovative technologies applicable to utility and nonutility power generators

Energy Technology Data Exchange (ETDEWEB)

McDermott, K.A. [Illinois Commerce Commission, Springfield, IL (United States); Bailey, K.A.; South, D.W. [Argonne National Lab., IL (United States). Environmental Assessment and Information Sciences Div.

1993-08-01

Innovative technologies, built by either utility or nonutility power generators, have the potential to lower costs with less environmental emissions than conventional technologies. However, the public-good nature of information, along with uncertain costs, performance, and reliability, discourages rapid adoption of these technologies. The effect of regulation of electricity production may also have an adverse impact on motivation to innovate. Slower penetration of cleaner, more efficient technologies could result in greater levels of pollution, higher electricity prices, and a reduction in international competitiveness. Regulatory incentives could encourage adoption and deployment of innovative technologies of all kinds, inducting clean coal technologies. Such incentives must be designed to offset risks inherent in innovative technology and encourage cost-effective behavior. To evaluate innovative and conventional technologies equally, the incremental cost of risk (ICR) of adopting the innovative technology must be determined. Through the ICR, the magnitude of incentive required to make a utility (or nonutility) power generator equally motivated to use either conventional or innovative technologies can be derived. Two technology risks are examined: A construction risk, represented by a 15% cost overrun, and an operating risk, represented by a increased forced outage rate (decreased capacity factor). Different incentive mechanisms and measurement criteria are used to assess the effects of these risks on ratepayers and shareholders. In most cases, a regulatory incentive could offset the perceived risks while encouraging cost-effective behavior by both utility and nonutility power generators. Not only would the required incentive be recouped, but the revenue requirements would be less for the innovative technology; also, less environmental pollution would be generated. In the long term, ratepayers and society would benefit from innovative technologies.

78 FR 70963 - NASA Advisory Council; Technology and Innovation Committee; Meeting

Science.gov (United States)

2013-11-27

... of the Technology and Innovation Committee (TIC) of the NASA Advisory Council (NAC). The meeting will... Propellant Storage and Transfer; and a discussion of barriers to innovation and innovation enablers. DATES... Barriers to Innovation and Innovation Enablers The meeting will be open to the public up to the seating...

Enhancing technological innovation in small firms: Role of collaboration

International Nuclear Information System (INIS)

Singh, D; Khamba, J S; Nanda, T

2014-01-01

Contribution of Micro-Small and Medium Enterprises (MSMEs) is highly remarkable in the overall industrial economy of the country. In recent years, the MSME sector has consistently registered higher growth rate compared to the overall industrial sector. With its agility and dynamism, the sector has shown admirable innovativeness and adaptability to survive the recent economic downturn and recession. However, MSMEs growth rate is still at low level. Therefore, it becomes essential for organizations to adopt new technologies or upgrade existing setup to meet continuously changing global market and fulfill customer needs. This paper explores the relationships between different collaboration networks and technological innovation of small firms through an extensive review of literature. The study finds that collaboration with larger enterprises, R and D institutions, universities and government agencies play a significant role in enhancing technological innovation in small firms

Small Business Innovation Research and Small Business Technology Transfer Programs

Science.gov (United States)

Garrison, Lynn; Jasper, Gwen

2015-01-01

The Small Business Innovation Research (SBIR)/Small Business Technology Transfer (STTR) programs fund the research, development, and demonstration of innovative technologies that fulfill NASA's needs as described in the annual Solicitations and have significant potential for successful commercialization. The only eligible participants are small business concern (SBC) with 500 or fewer employees or a nonprofit research institute such as a university or a research laboratory with ties to an SBC. These programs are potential sources of seed funding for the development of small business innovations.

Drivers of international performance of Brazilian technology-based firms

Directory of Open Access Journals (Sweden)

Maria Carolina Serpa Fagundes de Oliveira

2018-01-01

Full Text Available For Technology-Based Firms, international expansion represents an opportunity for growth and value creation. The present study was designed to analyze the role of technology-based companies (TBCs internationalization drivers on international performance. Therefore, a descriptive research was carried out with a quantitative approach performed through a survey. Data collection happened with 53 Brazilian TBCs located in innovation habitats. These data were analyzed by multivariate statistical technique. The results showed that the determinants of the international performance of Brazilian TBCs, can be set by external influencers (localization in innovation habitats, integration into global productive chains, partnerships and strategic alliances for innovation and government policies and internal influencers (innovation capability, international market orientation and international marketing skills.

Evolutionary analysis of technological innovations: the example of solar photovoltaic and wind energy

International Nuclear Information System (INIS)

Taillant, Pierre

2005-01-01

The objective of this research thesis is to study the building up and the development of technologies for renewable energies considered as environmental radical innovations. In a first part, the author discusses the systemic aspects of innovation and the environmental challenges associated with energy technologies. He examines the main evolutions of energy systems over a long period. In a second part, he addresses innovation incentives in the case of environmental technologies and within the frame of the neo-classical economic theory. The next parts aim at presenting the theoretical framework of the evolutionary analysis of innovation and technical change, and at applying it to the case of technological innovations for renewable energies (photovoltaic and wind energy). World PV market trends are discussed and the technological competition context of this sector is analysed. The evolution of the solar PV technological system in Germany is discussed, as well as the specific case of development of the wind energy technological system in Denmark

Grounding the Innovation of Future Technologies

Directory of Open Access Journals (Sweden)

Antti Oulasvirta

2005-01-01

Full Text Available Mobile and ubiquitous technologies can potentially change the role of information and communication technology in human lives. Empirical, human-centered approaches are emerging as an alternative to technology-driven approaches in the innovation of these technologies. Three necessary empirical stages, intertwined with analytical ones and with each informing and grounding the succeeding stages, are analyzed. First, needfinding is utilized to discover societal and individual demands for technology. Second, observational and experimental studies examine the social and cognitive preconditions for interaction. From these two steps, a hypothesis is formulated regarding how technology will change existing practices. Finally, this hypothesis, embodied in the design of a prototype, is tested in a field trial. Four design cases illustrate the value of empirical grounding.

Determinants of the Pace of Global Innovation in Energy Technologies

Science.gov (United States)

Kaur, Jasleen

2013-01-01

Understanding the factors driving innovation in energy technologies is of critical importance to mitigating climate change and addressing other energy-related global challenges. Low levels of innovation, measured in terms of energy patent filings, were noted in the 1980s and 90s as an issue of concern and were attributed to limited investment in public and private research and development (R&D). Here we build a comprehensive global database of energy patents covering the period 1970–2009, which is unique in its temporal and geographical scope. Analysis of the data reveals a recent, marked departure from historical trends. A sharp increase in rates of patenting has occurred over the last decade, particularly in renewable technologies, despite continued low levels of R&D funding. To solve the puzzle of fast innovation despite modest R&D increases, we develop a model that explains the nonlinear response observed in the empirical data of technological innovation to various types of investment. The model reveals a regular relationship between patents, R&D funding, and growing markets across technologies, and accurately predicts patenting rates at different stages of technological maturity and market development. We show quantitatively how growing markets have formed a vital complement to public R&D in driving innovative activity. These two forms of investment have each leveraged the effect of the other in driving patenting trends over long periods of time. PMID:24155867

Utilizing technological innovations to enhance psychotherapy supervision, training, and outcomes.

Science.gov (United States)

Barnett, Jeffrey E

2011-06-01

Recent technological advances in the use of the Internet and video technologies has greatly impacted the provision of psychotherapy and other clinical services as well as how the training of psychotherapists may be conducted. When utilized appropriately these technologies may provide greater access to needed services to include treatment, consultation, supervision, and training. Specific ethical challenges and pitfalls are discussed and recommendations are made for the ethical use of these technologies. Additionally, innovative practices from the seven articles in the special section that follows are highlighted and reviewed. These articles present a number of innovations that can take psychotherapy training, research, supervision, and treatment forward toward increased effectiveness. Recommendations for integrating these innovations into ongoing practices are provided and for additional research to build on the important work of the authors in this special section are provided.

Clean energy storage technology in the making: An innovation systems perspective on flywheel energy storage.

Science.gov (United States)

Wicki, Samuel; Hansen, Erik G

2017-09-20

The emergence and diffusion of green and sustainable technologies is full of obstacles and has therefore become an important area of research. We are interested in further understanding the dynamics between entrepreneurial experimentation, market formation, and institutional contexts, together playing a decisive role for successful diffusion of such technologies. Accordingly, we study these processes by adopting a technological innovation system perspective focusing on actors, networks, and institutions as well as the functions provided by them. Using a qualitative case study research design, we focus on the high-speed flywheel energy storage technology. As flywheels are based on a rotating mass allowing short-term storage of energy in kinetic form, they represent an environmentally-friendly alternative to electrochemical batteries and therefore can play an important role in sustainable energy transitions. Our contribution is threefold: First , regarding the flywheel energy storage technology, our findings reveal two subsystems and related markets in which development took different courses. In the automotive sector, flywheels are developing well as a braking energy recovery technology under the influence of two motors of innovation. In the electricity sector, they are stagnating at the stage of demonstration projects because of two important system weaknesses that counteract demand for storage. Second , we contribute to the theory of technological innovation systems by better understanding the internal dynamics between different functions of an innovation system as well as between the innovation system and its (external) contextual structures. Our third contribution is methodological. According to our best knowledge, we are the first to use system dynamics to (qualitatively) analyze and visualize dynamics between the diverse functions of innovation systems with the aim of enabling a better understanding of complex and iterative system processes. The paper also

Energy prices, technological knowledge and green energy innovation. A dynamic panel analysis of patent counts

International Nuclear Information System (INIS)

Kruse, Juergen; Wetzel, Heike; Koeln Univ.

2014-01-01

We examine the effect of energy prices and technological knowledge on innovation in green energy technologies. In doing so, we consider both demand-pull effects, which induce innovative activity by increasing the expected value of innovations, and technology-push effects, which drive innovative activity by extending the technological capability of an economy. Our analysis is conducted using patent data from the European Patent Office on a panel of 26 OECD countries over the period 1978-2009. Utilizing a dynamic count data model for panel data, we analyze 11 distinct green energy technologies. Our results indicate that the existing knowledge stock is a significant driver of green energy innovation for all technologies. Furthermore, the results suggest that energy prices have a positive impact on innovation for some but not all technologies and that the e.ect of energy prices and technological knowledge on green energy innovation becomes more pronounced after the Kyoto protocol agreement in 1997.

INVESTIGATION OF MARKETING TECHNOLOGIES IN THE INNOVATION PROCESS OF ROCKET AND SPACE INDUSTRY

Directory of Open Access Journals (Sweden)

K. B. Dobrova

2016-01-01

Full Text Available In this article we have studied the use of marketing technologies in the innovation process of enterprises of rocket and space industry. The present study specifies the relevance of chosen research topic, as well as the essence of marketing innovations at the enterprises of rocket and space industry, the structuring of marketing and management processes in the innovation process. There are provided the most common analytical instruments in the marketing and there is marked the importance of use of a global strategy for the enterprises of rocket and space industry. The article also specifies a clear example of application of marketing technologies in the innovation process of the Federal State Unitary Enterprise "State Space Research and Production Center named after Khrunichev M.V'.'. At the beginning the role and place of innovation management and innovation process in the strategic management of the FSUE "SSRPC named after Khrunichev M.V." are shown. Then there are described the basic marketing methods of program-oriented management of the innovation process in the FSUE "SSRPC named after Khrunichev M.V"" and there is highlighted the innovation marketing strategy of the FSUE "SSRPC named after Khrunichev M.V.". There are presented the distinctive features of the competitive strategy of the company of the rocket and space industry and the features of formation (development of the innovative enterprise development strategy based on marketing innovation in the FSUE "SSRPC named after Khrunichev M.V.". The conclusion includes the main findings of the study conducted.

Environmental information system and odour monitoring based on citizen and technology innovative sensors

Energy Technology Data Exchange (ETDEWEB)

Ledent, Philippe [SPACEBEL S.A., Angleur (Belgium); Stevenot, Bernard [APS Technology, Namur (Belgium); Delva, Julien [ODOMETRIC SA, Meix-Devant-Virton (Belgium); and others

2013-07-01

The challenge is the integration of citizens as ''community-based'' observation providers, giving the odour perception and discomfort and getting feed-back in real time from a learning monitoring system. The level of annoyance depends on how odours are emitted and in what intensity, their dispersion under ambient atmospheric conditions and finally on citizens' exposure and perception. The Environmental Information System and Odour Monitoring developed in the project OMNISCIENTIS funded by the EU brings together state of the art technologies and open communication capabilities in order to mitigate odour annoyance. The project allows for citizen feedback, deepens knowledge on odour measurement and management and aims to support harmonised legislation at EU level. Moreover the project results can provide savings to industries. The core is an information system allowing inhabitants to serve as human sensors, acting according to sociological patterns, which influence odour perception, discomfort and nuisance. It provides a dedicated tool to consider odour acceptability, based on a community-based opinion. Due to the subjective nature of odour perception, odour monitoring and fast modelling is used to assist and adjust the information citizens provide via Smartphone and obtained by e-nose and modelling. Innovative in-situ sensors are improved to monitor ambient odour exposures. A specific odour dispersion model system is developed to obtain interrelated spatial odour exposure levels. This fast and innovative model system helps us to evaluate the performance of measures taken at the very moment odours are emitted and with respect to the way in which these occur. The Living Lab approach ensures stakeholder involvement, citizens' participation in decision-making and supports dissemination activities. The results are conveyed to stakeholders and general public. (orig.)

Simultaneous Versus Sequential Complementarity in the Adoption of Technological and Organizational Innovations

DEFF Research Database (Denmark)

Battisti, Giuliana; Rabbiosi, Larissa; Colombo, Massimo G.

2015-01-01

It is generally suggested that technological and organizational innovations, being complementary, need to be adopted simultaneously. Nevertheless, sequential rather than simultaneous adoption of these two types of innovation may be optimal. In this paper, we analyze the pattern of mutual causation...... of technological and organizational innovations and contribute to the understanding of their interdependencies......

Innovative technologies of waste recycling with production of high performance products

International Nuclear Information System (INIS)

Gilmanshin, R; Azimov, Yu I; Gilmanshina, S I; Ferenets, A V; Galeeva, A I

2015-01-01

The innovative ways of recycling wastes as a tool for sustainable development are presented in the article. The technology of the production of a composite material based on the rubber fiber composite waste tire industry is presented. The results of experimental use of the products in the real conditions. The comparative characteristics of the composite material rubber fiber composite are given. The production technology of construction and repairing materials on the basis of foamed glass is presented. (paper)

Innovative technologies of waste recycling with production of high performance products

Science.gov (United States)

Gilmanshin, R.; Ferenets, A. V.; Azimov, Yu I.; Galeeva, A. I.; Gilmanshina, S. I.

2015-06-01

The innovative ways of recycling wastes as a tool for sustainable development are presented in the article. The technology of the production of a composite material based on the rubber fiber composite waste tire industry is presented. The results of experimental use of the products in the real conditions. The comparative characteristics of the composite material rubber fiber composite are given. The production technology of construction and repairing materials on the basis of foamed glass is presented.

ResonantSonic drilling. Innovative technology summary report

International Nuclear Information System (INIS)

1995-04-01

The technology of ResonantSonic drilling is described. This technique has been demonstrated and deployed as an innovative tool to access the subsurface for installation of monitoring and/or remediation wells and for collection of subsurface materials for environmental restoration applications. The technology uses no drilling fluids, is safe and can be used to drill slant holes

2010 Strategic national plan of Science Technology and Innovation PENCTI

International Nuclear Information System (INIS)

2010-07-01

The document presents the national strategic plan for Science Technology and Innovation, its history, premises, conceptual framework, the starting situation, guiding principles, strategic objectives and priority area such as new energy sources to diversify the national energy matrix, environment environment and preservation of natural resources, governance and private management with increasing levels of dependency with the development of strategic technology knowledge and innovation

Competition and innovation in a technology setting software duopoly

DEFF Research Database (Denmark)

Bitzer, Jürgen; Schröder, Philipp

2003-01-01

the assumption that software producers compete in technology rather than price or quantities. The model includes the presence of technological progress and menu costs of adjusting existing software, i.e. innovation. It is found that: (i) moving from monopoly to duopoly does increase the technology level set......Recently the software industry has experienced fundamental changes in market structure through the entry of open source competitors, e.g. Linux's entry into the operating systems market. In a simple model we examine the effects of such a change in market structure from monopoly to duopoly under...... by firms in the software industry; (ii) a duopoly adjusts more readily to global technological progress than a monopolist. Furthermore, results are presented comparing open source versus for-profit firms in terms of technology levels and innovation....

Strengthening regional innovation through network-based innovation brokering

OpenAIRE

Svare, Helge; Gausdal, Anne Haugen

2015-01-01

The primary objective of this paper is to demonstrate how regional innovation system theory may be translated into manageable micro-level methods with the potential for strengthening the productive dynamics of a regional innovation system. The paper meets this objective by presenting network-based innovation brokering (NBIB), a practical method designed using insights from regional innovation system theory and trust theory. Five cases from two Norwegian regional innovation networks show that ...

DIAGNOSTIC AND PROPOSAL OF IMPROVEMENT FOR THE INNOVATION MANAGEMENT IN A TECHNOLOGICAL COMPANY

Directory of Open Access Journals (Sweden)

Rossetti, Germán

2017-12-01

Full Text Available The Innovation Management is defined as the process oriented to organize and lead available resources, both technical and economic, with the objective of increasing the creation of new products, processes, knowledge and their application in the structure of the company. Nowadays companies are immersed in a globalized world, where competition is higher, which implies their growing interest in innovating, developing and improving their products or services to take a leading position in the market. Therefore, it is essential to be at the vanguard of current needs and to use certain tools that help to offer better products or services, and to obtain higher benefits, economic and social, technological, prestige, among others. In this paper a diagnostic and proposal of improvement for the Innovation Management in a technology-based company, located in the province of Santa Fe, Argentina, is made. For this, a methodology that allows to evaluate the capacity to innovate of the company is applied. As a main conclusion, it can be said that the diagnostic and proposal of improvement provided to the company is the starting point to ensure a successful and continuous innovation management.

Innovation in surgical technology and techniques: Challenges and ethical issues.

Science.gov (United States)

Geiger, James D; Hirschl, Ronald B

2015-06-01

The pace of medical innovation continues to increase. The deployment of new technologies in surgery creates many ethical challenges including how to determine safety of the technology, what is the timing and process for deployment of a new technology, how are patients informed before undergoing a new technology or technique, how are the outcomes of a new technology evaluated and how are the responsibilities of individual patients and society at large balanced. Ethical considerations relevant to the implementation of ECMO and robotic surgery are explored to further discussion of how we can optimize the delicate balance between innovation and regulation. Copyright © 2015 Elsevier Inc. All rights reserved.

How to encourage entrepreneurship and innovation through the development of technology-based projects in the context of university teaching?

Directory of Open Access Journals (Sweden)

Mercedes Segarra Ciprés

2017-10-01

Full Text Available Entrepreneurship and innovation are two of the values demanded by firms today, and therefore the associated skills are enhanced in grades with a clear focus on entrepreneurship. The goal is that students who leave their classrooms were able to undertake and not only in the sense of creating a firm, but also to have the ability to innovate in any tasks that require professional performance. However, despite the clear need to promote entrepreneurship, there are few practical examples of how to teach this competence. In this paper, we present an educational experience based on the theoretical framework provided by the Triple Helix Model, according to which synergies in entrepreneurship are multiplied when are joined the three axes in the task of undertaking: institutional, university and business. Its goal has been to support students from the business idea to the creation of a technology-based company, as a way to enhance their entrepreneurial and innovative capacity. To carry it out has created a multidisciplinary working group in which at university axis level courses of different knowledge domain have been coordinated: engineering, social sciences and humanities.

Innovative information technologies and their impact on the performance of the entities which activate in the retail industry

OpenAIRE

Valentin-Florentin Dumitru; Gabriel Jinga; Florin Mihai; Aurelia Stefănescu

2015-01-01

The use of innovative information technologies can represent an advantage for the companies in the retail industry. This research is based on the results of an empirical study. The research was built under the auspices of the diffusion of innovations theory. Using the questionnaires collected we could establish correlations between the variables included into three categories (company’s size, the information technologies used for retail, the impact of information technologies on the company) ...

Business models for maximising the diffusion of technological innovations for climate-smart agriculture

NARCIS (Netherlands)

Long, Thomas B.; Blok, Vincent; Poldner, Kim

2017-01-01

Technological innovations will play a prominent role in the transition to climate-smart agriculture (CSA). However, CSA technological innovation diffusion is subject to socio-economic barriers. The success of innovations is partly dependent on the business models that are used to diffuse them.

Measuring Manufacturing Innovativeness

DEFF Research Database (Denmark)

Blichfeldt, Henrik; Knudsen, Mette Præst

2017-01-01

Globalization and customization increases the pressure on manufacturing companies, and the ability to provide innovativeness is a potential source of competitive advantage. This paper positions the manufacturing entity in the innovation process, and investigates the relation between innovation vers...... technology and organizational concepts. Based on Danish survey data from the European Manufacturing Survey (EMS-2015) this paper finds that there is a relation between innovative companies, and their level of technology and use of organizational concepts. Technology and organizational concepts act...... as manufacturing levers to support the manufacturing and production system to provide innovativeness. The managerial implication lies in building manufacturing capabilities to support the innovative process, by standardization, optimization and creating stability in combination with automation and advanced...

The formalization of innovative processes of food technology equipment

Directory of Open Access Journals (Sweden)

V. A. Panfilov

2016-01-01

Full Text Available Improving the efficiency of scientific and engineering work to develop methods for converting agricultural raw materials into food is the most important condition of output processing and food sectors of agriculture in the sixth technological structure. The purpose of this article is to formalize the process of creating a progressive technique of food technologies. The process of self-organizing technological systems, presents a model of dual mechanism of control with regard to the processes of food technology. It is shown that in the process of adaptation development of the technological system as purposefully improving the structure and functioning of the system: increases the efficiency of interaction with the external environment. This smoothed out the contradictions of the technological system and its the main thing, the main technical contradiction: «productivity – quality». The steps to be taken to ensure that the technological system of conditions for intensive development. It is concluded that the potential development of some technological systems is hidden in the perspective of automation, and others – is associated with adaptive development processes, in particular machines, devices and bioreactors. The paper shows that innovative and truly breakthrough developments leading to the creation of fundamentally new equipment and new generations of technological systems, possible only with the establishment of patterns of organization, structure, functioning and development of open systems, which are modern technologies of agriculture. The mechanism of control of technological object acts as a core of adaptive development, which implements the anti-entropic entity management object, formalizing the innovation process of innovative food processing technologies.

Innovations in food technology for health.

Science.gov (United States)

Hsieh, Yun-Hwa Peggy; Ofori, Jack Appiah

2007-01-01

Modern nutritional science is providing ever more information on the functions and mechanisms of specific food components in health promotion and/or disease prevention. In response to demands from increasingly health conscious consumers, the global trend is for food industries to translate nutritional information into consumer reality by developing food products that provide not only superior sensory appeal but also nutritional and health benefits. Today's busy life styles are also driving the development of healthy convenience foods. Recent innovations in food technologies have led to the use of many traditional technologies, such as fermentation, extraction, encapsulation, fat replacement, and enzyme technology, to produce new health food ingredients, reduce or remove undesirable food components, add specific nutrient or functional ingredients, modify food compositions, mask undesirable flavors or stabilize ingredients. Modern biotechnology has even revolutionized the way foods are created. Recent discoveries in gene science are making it possible to manipulate the components in natural foods. In combination with biofermentation, desirable natural compounds can now be produced in large amounts at a low cost and with little environmental impact. Nanotechnology is also beginning to find potential applications in the area of food and agriculture. Although the use of new technologies in the production of health foods is often a cause for concern, the possibility that innovative food technology will allow us to produce a wide variety of food with enhanced flavor and texture, while at the same time conferring multiple health benefits on the consumer, is very exciting.

UK innovation systems for new and renewable energy technologies: drivers, barriers and systems failures

International Nuclear Information System (INIS)

Foxon, T.J.; Gross, R.; Chase, A.; Howes, J.; Arnall, A.; Anderson, D.

2005-01-01

A better understanding of the systemic processes by which innovation occurs is useful, both conceptually and to inform policy-making in support of innovation in more sustainable technologies. This paper analyses current innovation systems in the UK for a range of new and renewable energy technologies, and generates policy recommendations for improving the effectiveness of these innovation systems. Although incentives are in place in the UK to encourage innovation in these technologies, system failures - or 'gaps' - are identified in moving technologies along the innovation chain, preventing their successful commercialisation. Sustained investment will be needed for these technologies to achieve their potential. It is argued that a stable and consistent policy framework is required to help create the conditions for this. In particular, such a framework should be aimed at improving risk/reward ratios for demonstration and pre-commercial stage technologies. This would enhance positive expectations, stimulate learning effects leading to cost reductions, and increase the likelihood of successful commercialisation

Influences of Government Championship on the Technology Innovation Process at the Project-level

Science.gov (United States)

Yue, Xin

Government support is a popular instrument to foster technology innovation. It can take various forms such as financial aid, tax credits, and technological assistance. Along with the firm characteristics, strategic behavior of the project team, characteristics of the technology and the market, and the regulatory environment, government support influences firms' research and development (R&D) motivations, decision making process, and hence technology development performance. How government support influences the performance in different industries is an important policy and research question. There are many studies on the effectiveness and impacts of government support, mostly at program-level or industry-level. Government Championship is a form of government support distinct from direct financial or technological assistance. Championship includes expressing confidence in the innovation, encouraging others to support the innovation, and persisting under adversity. Championship has been studied as a critical inside factor for innovation success, particularly at project-level. Usually a champion emerged within the organization responsible for the innovation project. However, with the intention to encourage technology development, governments can also play a championship role. Government championship, besides government financial and technological assistance (hereafter "government F&T"), could be one major category of government support to facilitate high-technology innovation. However, there are few studies focusing on the effectiveness of government championship, and how it influences the innovation process. This thesis addresses this question through two studies on high-technology development projects. The first study has tested the effectiveness of government championship on the performance of 431 government sponsored technology innovation projects. Government championship and government F&T, as well as project team strategic behavior, are hypothesized to influence

Needs-Based Innovation in Interventional Radiology: The Biodesign Process.

Science.gov (United States)

Steinberger, Jonathan D; Denend, Lyn; Azagury, Dan E; Brinton, Todd J; Makower, Josh; Yock, Paul G

2017-06-01

There are many possible mechanisms for innovation and bringing new technology into the marketplace. The Stanford Biodesign innovation process is based in a deep understanding of clinical unmet needs as the basis for focused ideation and development. By identifying and vetting a compelling unmet need, the aspiring innovator can "derisk" a project and maximize chances for successful development in an increasingly challenging regulatory and economic environment. As a specialty founded by tinkerers, with a history of disruptive innovation that has yielded countless new ways of delivering care with minimal invasiveness, lower morbidity, and lower cost, interventional radiologists are uniquely well positioned to identify unmet needs and develop novel solutions free of dogmatic convention. Copyright © 2017 Elsevier Inc. All rights reserved.

Integration of market pull and technology push in the corporate front end and innovation management - Insights from the German software industry

DEFF Research Database (Denmark)

Brem, Alexander; Voigt, K.-I.

2009-01-01

Within the framework of this paper, an extensive literature overview of technology and innovation management aspects on market pull and technology push will be given. The existing classification of market pull and technology push will be particularly shown and called into question by suggesting...... a conceptual framework. Additionally, the most common front end innovation models will be introduced. Finally, the authors will introduce how a technology-based service company is managing the connection of these two alternatives. A special focus will be laid on the accordant methods in order to search...... will be introduced as to how market pull and technology push activities within the corporate technology and innovation management can be integrated. Hence, the purpose of the paper is to introduce a theory-based conceptual framework that can be used in today’s corporate environment. In this context, technology...

Barriers and Facilitators of Collaborative Management in Technological Innovation Projects

Directory of Open Access Journals (Sweden)

Sonia Regina Hierro Parolin

2013-05-01

Full Text Available Discussions about innovation tend to a more systemic and cooperative approach in which those networks focused on scientific and technological development are considered. This article aims to identify the barriers and facilitators in the collaborative management process of technological innovation projects and a study has been carried out by the cooperation action for innovation with 17 industries in Brazil. The primary evidence refers to the crucial role of project managers when leading the structural demands, and clarity on the relevance of the communication of strategic guidelines among the organizations involved for the achievement of the results in the industries.

An innovation diffusion model for new mobile technologies acceptance

Directory of Open Access Journals (Sweden)

Barkoczia Nadi

2017-01-01

Full Text Available This paper aims to approach the diffusion model developed in 1960 by Frank Bass has been utilized to study the distribution of different types of new products and services. The Bass Model helps by describing the process in which new products are adopted in a market. This model is a useful tool for predicting the first purchase of an innovative product for which there are competing alternatives on the market. It also provides the innovator with information regarding the size of customers and the adoption time for the product. The second part of the paper is dedicated to a monographic study of specific conceptual correlations between the diffusion of technology and marketing management that emphasizes technological uncertainty and market uncertainty as major risks to innovative projects. In the final section, the results of empirical research conducted in Baia-Mare, Romania will be presented in a way that uses diffusion Bass model to estimate the adoption period for new mobile technologies.

1992 update of US EPA's Superfund Innovative Technology Evaluation (SITE) Emerging Technology Program

International Nuclear Information System (INIS)

Lewis, N.M.; Barkley, N.P.; Williams, T.

1992-01-01

The Superfund Innovative Technology Evaluation (SITE) Emerging Technology Program (ETP) has financially supported further development of bench- and pilot-scale testing and evaluation of innovative technologies for use at hazardous waste sites for five years. The ETP was established under the Superfund Amendments and Reauthorization Act (SARA) of 1986. The ETP complies with the goal of the SITE Program to promote, accelerate and make commercially available the development of alternative/innovative treatment technologies for use at Superfund sites. Technologies are submitted to the ETP through yearly solicitations for Preproposals. Applicants are asked to submit a detailed project proposal and a cooperative agreement application that requires Developer/EPA cost sharing. EPA co-funds selected Developers for one to two years. Second-year funding requires documentation of significant progress during the first year. Facilities, equipment, data collection, performance and development are monitored throughout the project. The US Department of Energy (DOE) and the US Air Force (USAF) are participants in the ETP. DOE has co-funded ETP projects since 1990 and the USAF since 1991. A goal of the ETP is to move developed technologies to the field-demonstration stage. A developer may be considered for participation in the SITE Demonstration Program if performance in the ETP indicates the technology is field-ready for evaluation. Six technology categories: biological, chemical, materials handling, physical, solidification/stabilization and thermal, are presently in the ETP. Technologies of primary interest to EPA are those that can treat complex mixtures of hazardous organic and inorganic contaminants and provide improved solids handling and/or pretreatment. An account of the background and progress of the ETP's first five years is presented in this paper. Technologies currently in the ETP are noted, and developers and EPA Project Managers, are listed. 4 refs., 11 figs., 6 tabs

The Mediating Role of Knowledge Sharing on Information Technology and Innovation

Directory of Open Access Journals (Sweden)

Onwika Kaewchur

2013-12-01

Full Text Available This study aims to investigate the relationship between information technology, knowledge sharing, and a firm’s innovation. Knowledge sharing as a mediating effect is also simultaneously investigated with regard to the relationship between information technology and a firm’s innovation. In this research, the quantitative method was mainly employed. The data was collected with a survey. A total of 224 respondents from herbal manufacturing companies were included in the research. The results presented in this paper demonstrate that knowledge sharing and information technology can critically influence the organization’s innovation and can play a vital role as a significant success factor in this process.